WorldWideScience

Sample records for industrial manufacturing routes

  1. Friction Stir Additive Manufacturing: Route to High Structural Performance

    Science.gov (United States)

    Palanivel, S.; Sidhar, H.; Mishra, R. S.

    2015-03-01

    Aerospace and automotive industries provide the next big opportunities for additive manufacturing. Currently, the additive industry is confronted with four major challenges that have been identified in this article. These challenges need to be addressed for the additive technologies to march into new frontiers and create additional markets. Specific potential success in the transportation sectors is dependent on the ability to manufacture complicated structures with high performance. Most of the techniques used for metal-based additive manufacturing are fusion based because of their ability to fulfill the computer-aided design to component vision. Although these techniques aid in fabrication of complex shapes, achieving high structural performance is a key problem due to the liquid-solid phase transformation. In this article, friction stir additive manufacturing (FSAM) is shown as a potential solid-state process for attaining high-performance lightweight alloys for simpler geometrical applications. To illustrate FSAM as a high-performance route, manufactured builds of Mg-4Y-3Nd and AA5083 are shown as examples. In the Mg-based alloy, an average hardness of 120 HV was achieved in the built structure and was significantly higher than that of the base material (97 HV). Similarly for the Al-based alloy, compared with the base hardness of 88 HV, the average built hardness was 104 HV. A potential application of FSAM is illustrated by taking an example of a simple stiffener assembly.

  2. Industrial & Manufacturing Engineering | Classification | College of

    Science.gov (United States)

    Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

  3. Comparative study of the different industrial manufacturing routes for UO2 pellet specifications through the wet process

    International Nuclear Information System (INIS)

    Palheiros, Franklin; Gonzaga, Reinaldo; Soares, Alexandre

    2009-01-01

    In the fuel cycle, converting UF 6 to UO 2 powder is an intermediate step for fabrication of pellets for fuel assemblies to be used in nuclear power plants. The basic proposal common to the different powder fabrication processes is to provide raw material capable of being processed into the form of pellets. The wet processes is the most often used industrially and are divided in two categories: the ADU (Ammonium Diuranate) and AUC (Ammonium Uranyl Carbonate) processes, whose names originate in the precipitate obtained in aqueous solution during the intermediate steps of UO 2 powder fabrication. It has known that the powder characteristics have a considerable influence in the UO 2 pellet manufacturing and quality characteristics. INB has used the AUC process to produce UO 2 pellets and supply fuel to Angra 1 and 2 Nuclear Power Plants. Despite of this process is characterized by the precipitation of a different intermediate precipitate compared to the ADU route (i.e., (NH 4 ) 4 UO 2 (CO 3 ) 3 , in the AUC process, and (NH 4 ) 2 U 2 O 7 in ADU process) leading to some slight differences in the final pellet microstructure, it has been considered that the models that predict the pellet behavior during irradiation in a nuclear reactor are basically the same compared to those used to predict the pellets form the ADU process. In order to evaluate how different the pellets originated from these two industrial routes are, this paper aims to compare the INB production historical data (Angra 1, Cycles 14 and 15) with the key parameters of a common product specification from the ADU process. (author)

  4. Manufacturing routes for stainless steel first wall panels

    International Nuclear Information System (INIS)

    Bucci, Ph.; Federzoni, L.; Le Marois, G.; Lorenzetto, P.

    2001-01-01

    Hot isostatic pressing (HIP) techniques are being considered in the European Home Team as one of the fabrication routes to produce ITER-FEAT primary first wall panels (PFWP). To demonstrate the potential and the availability of such techniques, material development, innovative mock-up fabrications and numerical modeling for the production of near-net shape components are currently been studied by CEA/CEREM in collaboration with the EFDA-CSU Garching. The aim of this work is to investigate the manufacturing feasibility of advanced PFWP concepts, with reduced pitch between FW cooling channels and reduced material thickness between the FW cooling channels and the front surface, in order to improve the thermal fatigue performance of these concepts. In order to select the best fabrication route, two different manufacturing methods based on the HIP process are being considered. The first one consists in manufacturing of the first wall panel by a HIP forming technique. Mock-ups are made of a serpentine tube expanded into a proper matrix. 2-D computer modeling has been performed to estimate the serpentine deformation. The second manufacturing route is based on the powder HIP technique. Mock-ups have been made of a serpentine embedded into SS powder. In both cases, the objective was to obtain the minimum pitch between the stainless steel (SS) tubes and between the SS tubes and the front face

  5. Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing

    Directory of Open Access Journals (Sweden)

    Adam Sanders

    2016-09-01

    Full Text Available Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industry 4.0 and lean manufacturing, and investigates whether Industry 4.0 is capable of implementing lean. Executing Industry 4.0 is a cost-intensive operation, and is met with reluctance from several manufacturers. This research also provides an important insight into manufacturers’ dilemma as to whether they can commit into Industry 4.0, considering the investment required and unperceived benefits. Design/methodology/approach: Lean manufacturing is first defined and different dimensions of lean are presented. Then Industry 4.0 is defined followed by representing its current status in Germany. The barriers for implementation of lean are analysed from the perspective of integration of resources. Literatures associated with Industry 4.0 are studied and suitable solution principles are identified to solve the abovementioned barriers of implementing lean. Findings: It is identified that researches and publications in the field of Industry 4.0 held answers to overcome the barriers of implementation of lean manufacturing. These potential solution principles prove the hypothesis that Industry 4.0 is indeed capable of implementing lean. It uncovers the fact that committing into Industry 4.0 makes a factory lean besides being smart. Originality/value: Individual researches have been done in various technologies allied with Industry 4.0, but the potential to execute lean manufacturing was not completely perceived. This paper bridges the gap between these two realms, and identifies

  6. The production route selection algorithm in virtual manufacturing networks

    Science.gov (United States)

    Krenczyk, D.; Skolud, B.; Olender, M.

    2017-08-01

    The increasing requirements and competition in the global market are challenges for the companies profitability in production and supply chain management. This situation became the basis for construction of virtual organizations, which are created in response to temporary needs. The problem of the production flow planning in virtual manufacturing networks is considered. In the paper the algorithm of the production route selection from the set of admissible routes, which meets the technology and resource requirements and in the context of the criterion of minimum cost is proposed.

  7. RECONFIGURABLE PRODUCT ROUTING AND CONTROL FOR MASS CUSTOMISATION MANUFACTURING

    Directory of Open Access Journals (Sweden)

    A. J. Walker

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT:Reconfigurable control of flexible manufacturing systems can allow for the efficient and responsive production of customised product instances. This can aid in providing make-to-order business models for various small- to medium-sized enterprises in South Africa, and provide competitive advantage in a dynamic global marketplace. Reconfigurable control application requires an understanding of the modes of production variability in mass customisation manufacturing. Temporally uncorrelated workflow routings are considered as one of these production variability modes. In this light, this paper addresses the flexible material payload routing problem, and presents a mobile robot platform that has been developed to research and design reconfigurable routing systems.

    AFRIKAANSE OPSOMMING:Verstelbare beheer van aanpasbare vervaardigingstelsels kan die doeltreffende en reaktiewe produksie van doelgemaakte produkeksemplare toelaat. Hierdie beheer kan assisteer in die voorsiening van vervaardig-na-bestellingbesigheidsmodelle aan ’n aantal klein- tot medium-grootte ondernemings in Suid-Afrika, en aan hulle ’n kompeterende voorsprong bied in ’n dinamiese globale mark. Die instelling van verstelbare beheer vereis dat die modi van produkveranderlikheid in massa verbruikersaanpassingsvervaardiging verstaan word. Hierdie artikel spreek die probleem van aanpasbare roetebepaling van materiaalvragte in massa verbruikersaanpassingsvervaardiging aan. ’n Mobiele robot-platform, ontwikkel vir navorsing in verstelbare roetebepalingstelsels, word ook voorgelê.

  8. Tube manufacturing trials by different routes in 9CrW-ODS martensitic steels

    International Nuclear Information System (INIS)

    Ukai, S.; Narita, T.; Alamo, A.; Parmentier, P.

    2004-01-01

    In the collaboration work between JNC and CEA-Saclay, JNC and CEA independently manufactured ODS martensitic cladding tubes by their own fabrication routes. Manufacturing started from the same hollow shape mother tubes with a composition of 9Cr-2W-0.1Ti-0.24Y 2 O 3 . The HPTR cold-rolling process was used by both JNC and CEA, but the applied fabrication routes included different cross-section reduction ratios, number of passes and intermediate heat treatments. The manufactured claddings exhibited an isotropic grain structure and equivalent tensile strength in the longitudinal and transverse directions. Even though different cross-section reduction ratios and intermediate annealing treatments were used, both cladding tubes manufactured by JNC and CEA showed similar levels of tensile and internal creep rupture strength

  9. Manufacturing Industry, Industry Study, Spring 2009

    Science.gov (United States)

    2009-01-01

    Shuib, Lieutenant Colonel, Royal Malaysian Air Force Kevin Brennan, Commander, U.S. Navy Mr. K. Ilia Christman, Department of the Navy Robert Costa...panel to review the impact of taxation , regulatory compliance, and benefits burdens on domestic manufacturers. Review would bring focus to ways...Finally, the MISG considered the effect of these 14 characteristics on the U.S. Manufacturing Industry vis-à-vis Chinese and Malaysian

  10. Dynamic cellular manufacturing system design considering ...

    Indian Academy of Sciences (India)

    Kamal Deep

    cellular manufacturing system in a company is division of ... designed to be assembled from a small number of stan- ..... contingency part process route in addition to the alternate .... istic industrial manufacturing vision considering multiple.

  11. Photovoltaic industry manufacturing technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

    1998-08-01

    This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

  12. Industry 4.0 and representative participation in innovation in manufacturing industries

    OpenAIRE

    Ramioul, Monique

    2017-01-01

    Industry 4.0 and representative participation in innovation in manufacturing industries Prof. dr. Monique Ramioul HIVA-KU Leuven, Belgium Abstract submitted for the ETUI-workshop “Digitalization of manufacturing and restructuring of value chains: technology adoption, upgrading, and the changing geography of production in Europe.” (23-24 February 2017, Naples Italy). Under the umbrella concept Industry4.0, the advanced digitalisation and robotisation of industry is presented as a pro...

  13. [Chinese medicine industry 4.0:advancing digital pharmaceutical manufacture toward intelligent pharmaceutical manufacture].

    Science.gov (United States)

    Cheng, Yi-Yu; Qu, Hai-Bin; Zhang, Bo-Li

    2016-01-01

    A perspective analysis on the technological innovation in pharmaceutical engineering of Chinese medicine unveils a vision on "Future Factory" of Chinese medicine industry in mind. The strategy as well as the technical roadmap of "Chinese medicine industry 4.0" is proposed, with the projection of related core technology system. It is clarified that the technical development path of Chinese medicine industry from digital manufacture to intelligent manufacture. On the basis of precisely defining technical terms such as process control, on-line detection and process quality monitoring for Chinese medicine manufacture, the technical concepts and characteristics of intelligent pharmaceutical manufacture as well as digital pharmaceutical manufacture are elaborated. Promoting wide applications of digital manufacturing technology of Chinese medicine is strongly recommended. Through completely informationized manufacturing processes and multi-discipline cluster innovation, intelligent manufacturing technology of Chinese medicine should be developed, which would provide a new driving force for Chinese medicine industry in technology upgrade, product quality enhancement and efficiency improvement. Copyright© by the Chinese Pharmaceutical Association.

  14. Inter- and intra-industry variations of capital structure in the Czech manufacturing industry

    Directory of Open Access Journals (Sweden)

    Pavlína Pinková

    2013-01-01

    Full Text Available The objective of the paper is to investigate the existence of inter-industry variations in the capital structure of enterprises of the Czech manufacturing industry and to identify the intra-industry causes of these differences. Three measures of capital structure are employed to determine the inter-industry variations. These are total debt ratio, long-term debt and short-term debt ratios. The set of explanatory variables is included to clarify the intra-industry variations. These explanatory variables are size, asset structure, asset utilization, profitability, non-debt tax shield and growth. The paper reports the analysis of capital structure of five distinctive industrial branches, namely the manufacture of beverages, the manufacture of textiles, the manufacture of paper and paper products, the manufacture of chemicals and chemical products, and the manufacture of computer, electronic and optical products. The data come from the financial statements of selected companies and cover a period from 2008 to 2012. The analysis of variance, correlation and regression analyses are used to develop the statistical framework. The paper aims to study the impact of industry and firm characteristics on capital structure choice.

  15. Manufacturing processes of cellular metals. Part I. Liquid route processes

    International Nuclear Information System (INIS)

    Fernandez, P.; Cruz, L. J.; Coleto, J.

    2008-01-01

    With its interesting and particular characteristics, cellular metals are taking part of the great family of new materials. They can have open or closed porosity. At the present time, the major challenge for the materials researchers is based in the manufacturing techniques improvement in order to obtain reproducible and reliable cellular metals with quality. In the present paper, the different production methods to manufacture cellular metals by liquid route are reviewed; making a short description about the main parameters involved and the advantages and drawbacks in each of them. (Author) 106 refs

  16. Energy use in the food manufacturing industry

    Energy Technology Data Exchange (ETDEWEB)

    Cleland, A.C.; Earle, M.D.

    1980-01-01

    A survey was conducted to find the level of energy consumption in the food manufacturing industry, which is the food processing industry excluding meat, dairy, and brewing. Data were used from 74 factories. The manufacturing industry was divided into 14 industry groups and the 4 major energy consumers were found to be fruit and vegetable processing, sugar refining, animal feed production, and bread and pastry baking. The present report summarizes results from the survey. It determined the following: the sources of energy used by the insu industry and the annual consumption of each energy form; the consumption of fuel and electricity in the production of the various manufactured food products; the minimum practical energy requirement for processing the various food products; and the potential for conservation and the methods for achieving savings.

  17. Manufacturing strategy issues in selected Indian manufacturing industry

    Directory of Open Access Journals (Sweden)

    Mahender Singh

    2013-03-01

    Full Text Available This paper presents some findings of Indian manufacturing sectors viz. automobile (especially two-wheeler, tractor and general manufacturing industry. Various manufacturing strategy issues such as competitive priorities, improvement activities, and performance measures, have been identified and assessed in Indian context. Sector wise comparison of competitive priorities, improvement activities i.e. advanced manufacturing technology (AMT, integrated information systems (IIS, and advanced management systems (AMS, and performance measure, is provided. Our results showed that most of the Indian companies are still emphasizing on quality. However, automobile sector has set to compete globally with high innovation rate, faster new product development, and continuous improvement. It is also observed that Indian companies are investing more in AMS as compared to IIS and AMT. Manufacturing competence index is also computed for each sector.

  18. Industrial based volume manufacturing of lightweight aluminium alloy panel components with high-strength and complex-shape for car body and chassis structures

    Science.gov (United States)

    Anyasodor, Gerald; Koroschetz, Christian

    2017-09-01

    To achieve the high volume manufacture of lightweight passenger cars at economic cost as required in the automotive industry, low density materials and new process route will be needed. While high strength aluminium alloy grades: AA7075 and AA6082 may provide the alternative material solution, hot stamping process used for high-strength and ultrahigh strength steels such as boron steel 22mnb5 can enable the volume manufacture of panel components with high-strength and complex-shape for car body and chassis structures. These aluminium alloy grades can be used to manufacture panel components with possible yield strengths ≥ 500 MPa. Due to the differences in material behaviors, hot stamping process of 22mnb5 cannot be directly applied to high strength aluminium alloy grades. Despite recorded successes in laboratories, researches and niche hot forming processes of high strength aluminium alloy grades, not much have been achieved for adequate and efficient volume manufacturing system applicable in the automotive industry. Due to lack of such system and based on expert knowledge in hot stamping production-line, AP&T presents in this paper a hot stamping processing route for high strength aluminium alloys been suitable for production-line development and volume manufacturing.

  19. Ergonomic Conditions in Small Manufacturing Industries

    Directory of Open Access Journals (Sweden)

    Ashraf A. Shikdar

    2001-12-01

    Full Text Available Ergonomic conditions in small manufacturing industries were investigated. Twenty seven managers of small manufacturing industries participated in the study. Old equipment and machines, poorly designed workplaces, lack of systematic planning, layout and organization, unsafe working conditions and poor environment were found common to these industries. Fifty-nine percent of companies indicated having equipment older than 15 years. Fifty-two percent of company managers reported receiving complaints of fatigue from their workforce, 41% complaints of back pain, and 33% complaints of upper-body pain. Seventy eight percent of companies reported a noisy environment (above 90 dBA while 63% reported a hot environment. Management in 44% of the companies acknowledged failure to ensure safety rules and 48% did not provide training on manual material handling. Lack of skills in ergonomics and training, communication and resources are believed to be some of the factors contributing to the poor ergonomic conditions in a sample of small manufacturing industries in Malaysia.

  20. Product Life Cycle of the Manufactured Home Industry

    Directory of Open Access Journals (Sweden)

    Gavin Wherry

    2014-09-01

    Full Text Available Residential construction consumes an estimated 26 percent of the total U.S. wood harvest and thus plays an important role in the forest products value chain. While being a relatively small part of the U.S. residential construction market, the factory-built residential housing industry, originating from manufactured homes (e.g. mobile homes, is embracing emerging industry segments such as modular or panelized homes. Since indications exist that factory-built home production is slated to gain a more prominent role in the U.S. construction markets at the cost of traditional stick-built production, the factory-built home industry sub-segment is of considerable importance to the forest products industry. This research looks at manufactured home producers as a benchmark for analyzing the current economic state of the industry and discusses competitive strategies. The analysis concludes, through macroeconomic modeling, that manufactured homes are in the declining stage of their product life cycle due to changes to the U.S. residential construction sector and the factory-built home industry and by advancements of rival industry-segments. As market share continues to decline, firms operating in this industry-segment seek to either hedge their losses through product diversification strategies or remain focused on strategically repositioning the manufactured home segment.

  1. Computer integrated manufacturing in the chemical industry : Theory & practice

    NARCIS (Netherlands)

    Ashayeri, J.; Teelen, A.; Selen, W.J.

    1995-01-01

    This paper addresses the possibilities of implementing Computer Integrated Manufacturing in the process industry, and the chemical industry in particular. After presenting some distinct differences of the process industry in relation to discrete manufacturing, a number of focal points are discussed.

  2. Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Azimi, S.A.; Conrad, J.L.; Reed, J.E.

    1985-03-01

    Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

  3. Integrating developing country manufacturing industries into global supply chain

    Directory of Open Access Journals (Sweden)

    Fasika Bete Georgise

    2014-01-01

    Full Text Available Purpose: Due to globalization of manufacturing activities, the arena of competition and competitiveness advantage is moving from firms towards supply chains and networks. With the recent advancement of information and communication technologies this participation are becoming as common business practice in developed countries firms. Companies were more integrated into the world market for the global nature of the sourcing, manufacturing and distribution. These changes create both challenges and opportunities for the manufacturing industries in developing countries. The objective of this paper is to examine the level of inter-organizational and intra-organizational supply chain integration practices in developing country, Ethiopia.Design/methodology/approach: An industrial questionnaires survey was used to collect the current practices of the manufacturing industries in Ethiopia as an example of the developing countries. Descriptive statistics is primarily used for the analysis.Findings: Results show a low level of supply chain relationship both in intra and inter organizational supply chain integration level among members. Accordingly, such issues require much attention to facilitate a greater integration within the supply chains in the Ethiopian manufacturing industries.Research limitations/implications: The paper focuses on examining the practices of Ethiopian manufacturing industries empirical data. The interpretation of results should be taken with prudence.Originality/Value: The manufacturing industry in developing countries (MIDC has been a part of the global supply chains for long time as a supplier of raw material and manufacturer of primary products. Currently, the MIDC is trying to access the different markets segment of the world even with new products starting from their local market to the complex and dynamic international market. Nevertheless, their supply chains are inefficient and hence, their competitiveness level far from the

  4. Industry 4.0 implies lean manufacturing: research activities in industry 4.0 function as enablers for lean manufacturing

    OpenAIRE

    Sanders, Adam; Elangeswaran, Chola; Wulfsberg, Jens

    2016-01-01

    Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industr...

  5. Optimizing inventory management in the insulation manufacturing industry

    OpenAIRE

    Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

    2016-01-01

    Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. T...

  6. Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

  7. Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

  8. Revisiting the Competitiveness of Romanian Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Ovidiu RUJAN

    2007-01-01

    Full Text Available Since the early 1990s the Romanian manufacturing industry has improved in many ways. This headway concerns the labour-intensive sector rather than the technology-intensive one. Apart from local entrepreneurship, foreign direct investments (FDI have been instrumental in enhancing industrial competitiveness. TheLisbon Agenda revival and Romania’s EU accession will be further inducements for Western businesses to shift production here to fight back both low-cost producers (typically from emerging Asia and more quality-oriented producers (typically from OECD countries. Hopefully, the FDI spillover effects will send positive vibrationsacross the economy, and tone down the asymmetry at the core of the manufacturing industry.

  9. Sustainable Manufacturing Practices in Malaysian Automotive Industry: Confirmatory Factor Analysis

    OpenAIRE

    Habidin, Nurul Fadly; Zubir, Anis Fadzlin Mohd; Fuz, Nursyazwani Mohd; Latip, Nor Azrin Md; Azman, Mohamed Nor Azhari

    2015-01-01

    Sustainable manufacturing practices (SMPs) have received enormous attention in current years as an effective solution to support the continuous growth and expansion of the automotive manufacturing industry. This reported study was conducted to examine confirmatory factor analysis for SMP such as manufacturing process, supply chain management, social responsibility, and environmental management based on automotive manufacturing industry. The results of confirmatory factor analysis show that fo...

  10. Research on networked manufacturing system for reciprocating pump industry

    Science.gov (United States)

    Wu, Yangdong; Qi, Guoning; Xie, Qingsheng; Lu, Yujun

    2005-12-01

    Networked manufacturing is a trend of reciprocating pump industry. According to the enterprises' requirement, the architecture of networked manufacturing system for reciprocating pump industry was proposed, which composed of infrastructure layer, system management layer, application service layer and user layer. Its main functions included product data management, ASP service, business management, and customer relationship management, its physics framework was a multi-tier internet-based model; the concept of ASP service integration was put forward and its process model was also established. As a result, a networked manufacturing system aimed at the characteristics of reciprocating pump industry was built. By implementing this system, reciprocating pump industry can obtain a new way to fully utilize their own resources and enhance the capabilities to respond to the global market quickly.

  11. Optimizing inventory management in the insulation manufacturing industry

    DEFF Research Database (Denmark)

    Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

    2016-01-01

    Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between...... service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. This paper contributes with empirical research within operations management in a sector which has not been...

  12. Shaping the manufacturing industry performance: MIDAS approach

    International Nuclear Information System (INIS)

    Turhan, Ibrahim M.; Sensoy, Ahmet; Hacihasanoglu, Erk

    2015-01-01

    We aim to find out whether the exchange rate (against US dollar) or the interest rate (in local currency) is a better variable in predicting the capacity utilization rate of manufacturing industry (CUR) of Turkey after the 2008 global financial crisis. In that manner, we implement dynamic mixed data sampling (MIDAS) regression model to forecast monthly changes in CUR by using daily changes in the exchange rate and the interest rate separately. The results show that exchange rate has a better forecast performance suggesting that it is a stronger determinant in shaping the manufacturing industry

  13. Study of secular equilibrium reinstatement on UO2 pellets manufactured by AUC route

    International Nuclear Information System (INIS)

    Carnaval, João Paulo R.; Beltran, Dalton J.M.C.; Oliveira, Carlos A.

    2017-01-01

    The fuel assemblies manufactured by INB for Angra-1 power plant has axial blanket fuel rods which must be inspected due the columns formed by different enrichment pellets. The equipment used for inspection is built with a group of BGO scintillators detectors which measurement principle is based on the absorption of gamma rays emitted from Uranium decay. The commercial grade UF 6 used by INB is stored into cylinders type 30B. The uranium inside these cylinders is in secular equilibrium before the processing. It has been found that the AUC route causes the loss of that equilibrium because the UF 6 is volatilized from the cylinder and the uranium daughters remain in the container. As AUC is converted to powder and pellets, the secular equilibrium is restored through time. The purpose of this work is to present a study of the secular equilibrium reinstatement on UO 2 pellets manufactured by AUC route before being inspected on Rod Scanner. (author)

  14. Trade routes and plague transmission in pre-industrial Europe.

    Science.gov (United States)

    Yue, Ricci P H; Lee, Harry F; Wu, Connor Y H

    2017-10-11

    Numerous historical works have mentioned that trade routes were to blame for the spread of plague in European history, yet this relationship has never been tested by quantitative evidence. Here, we resolve the hypothetical role of trade routes through statistical analysis on the geo-referenced major trade routes in the early modern period and the 6,656 geo-referenced plague outbreak records in AD1347-1760. Ordinary Least Square (OLS) estimation results show that major trade routes played a dominant role in spreading plague in pre-industrial Europe. Furthermore, the negative correlation between plague outbreaks and their distance from major trade ports indicates the absence of a permanent plague focus in the inland areas of Europe. Major trade routes decided the major plague outbreak hotspots, while navigable rivers determined the geographic pattern of sporadic plague cases. A case study in Germany indicates that plague penetrated further into Europe through the local trade route network. Based on our findings, we propose the mechanism of plague transmission in historical Europe, which is imperative in demonstrating how pandemics were spread in recent human history.

  15. RPC industries - UV and EB equipment manufacturers

    International Nuclear Information System (INIS)

    Rodrigues, A.M.

    1987-01-01

    RPC Industries has been manufacturing electron beam and ultraviolet equipment for the industrial processing of materials for more than 15 years. RPC maintains its headquarters and electron processor manufacturing plant in Hayward, California. UV equipment is made in the company's plant near Chicago. Sales offices are maintained in New York, Illinois, and California in the USA, and in Germany, Japan, Australia, Italy, Israel, and Sweden. Complete testing and pilot facilities are available in Hayward (EB) and near Chicago (UV). Described below are the basic system components, applications and advantages of RPC's UV and EB systems. (orig.)

  16. Offshoring trends in the manufacturing process within the automotive industry

    DEFF Research Database (Denmark)

    Simplay, S.; Hansen, Zaza Nadja Lee

    2014-01-01

    consisting of original equipment manufacturers and engineering service providers. The findings indicated some offshoring trends in the automotive industry. Offshoring in this industry is moving from a manufacturing focus to incorporate large parts of the process, including high-level product development...... engineering activities. This development has created several challenges. These challenges arose as organisations are not considering how offshoring activities could be integrated with an increasingly global supply chain for the manufacturing of the final product. The paper contributes to manufacturing theory...

  17. The near-term impacts of carbon mitigation policies on manufacturing industries

    International Nuclear Information System (INIS)

    Morgenstern, Richard D.; Ho Mun; Shih, J.-S.; Zhang Xuehua

    2004-01-01

    Who pays for new policies to reduce carbon dioxide and other greenhouse gas emissions in the United States? This paper considers a slice of the question by examining the near-term impact on domestic manufacturing industries of both upstream (economy-wide) and downstream (electric power industry only) carbon mitigation policies. Detailed Census data on the electricity use of four-digit manufacturing industries are combined with input-output information on inter-industry purchases to paint a detailed picture of carbon use, including effects on final demand. Regional information on electricity supply and use by region is also incorporated. A relatively simple model is developed which yields estimates of the relative burdens within the manufacturing sector of alternative carbon policies. Overall, the principal conclusion is that within the manufacturing sector (which by definition excludes coal production and electricity generation), only a small number of industries would bear a disproportionate short-term burden of a carbon tax or similar policy. Not surprisingly, an electricity-only policy affects very different manufacturing industries than an economy-wide carbon tax

  18. Scope of Internal Supply Chain Management Benchmarking in Indian Manufacturing Industries

    OpenAIRE

    Kailash; Rajeev Kumar Saha; Sanjeev Goyal

    2017-01-01

    Internal supply chain management benchmarking practice is necessary to overcome manufacturing industrial performance gap. The main purpose of this research work is to combine the benchmarking and internal supply chain practices to improve the performance of Indian manufacturing industries. In this paper, the main aim is to discuss the components of internal supply chain between suppliers and customers after that explain the scope of ISCM benchmarking in manufacturing industries.

  19. Stimulating Manufacturing Excellence through University-Industry Interaction

    DEFF Research Database (Denmark)

    Riis, Jens Ove

    2001-01-01

    This paper considers what a university engineering school can do to stimulate manufacturing excellence in industry. Aalborg University, with its unique use of problem-based learning methods, is used as a case example. This approach is also embedded in a new research initiative, the Centre...... for Industrial Production. Examples of industry involvement in research and development projects are given. Such university–industry collaboration will not only benefit the development of competencies in large and small industrial enterprises, but will also provide a laboratory setting for the study...

  20. Regional Capital Inputs in Chinese Industry and Manufacturing, 1978-2003

    NARCIS (Netherlands)

    Wang, Lili; Szirmai, Adam

    2008-01-01

    This paper provides new estimates of capital inputs in the Chinese economy. Estimates are made for the total economy (1953-2003), for the industrial sector (1978-2003) and for the manufacturing sector (1985-2003). The estimates for industry and manufacturing are broken down by thirty regions. The

  1. Theoretical comparative study of the industrial fabrication routes for UO2 powder

    International Nuclear Information System (INIS)

    Gonzaga, Reinaldo; Goncalves, Joao da Silva

    2008-01-01

    UO 2 powder is produced in an industrial scale by different fabrication routes, divided into dry and wet routes, or a combination of both. The wet processes most often used industrially are the ADU and AUC processes, whose names originate in the intermediate precipitate obtained during powder fabrication, Ammonium Diuranate and Ammonium Uranil Carbonate. Considering the dry processes, the most widely used ones are the DC (Dry Conversion) and IDR (Integrate Dry Route) process. As to the differences and peculiarities among the fabrication routes, each has marked advantages and disadvantages that are of extreme importance when it comes to selecting and establishing a UO 2 powder production plant based on a particular fabrication route. Among the important factors of comparison to be considered are the product quality characteristics, production capability, quantity of waste, operating costs of each process with raw material, labor, etc. This paper is intended to make a theoretical comparison between wet and dry processes for UO 2 powder fabrication, taking as the basis the previously mentioned factors of comparison. (author)

  2. Smart manufacturing systems for Industry 4.0: Conceptual framework, scenarios, and future perspectives

    Science.gov (United States)

    Zheng, Pai; wang, Honghui; Sang, Zhiqian; Zhong, Ray Y.; Liu, Yongkui; Liu, Chao; Mubarok, Khamdi; Yu, Shiqiang; Xu, Xun

    2018-06-01

    Information and communication technology is undergoing rapid development, and many disruptive technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, have emerged. These technologies are permeating the manufacturing industry and enable the fusion of physical and virtual worlds through cyber-physical systems (CPS), which mark the advent of the fourth stage of industrial production (i.e., Industry 4.0). The widespread application of CPS in manufacturing environments renders manufacturing systems increasingly smart. To advance research on the implementation of Industry 4.0, this study examines smart manufacturing systems for Industry 4.0. First, a conceptual framework of smart manufacturing systems for Industry 4.0 is presented. Second, demonstrative scenarios that pertain to smart design, smart machining, smart control, smart monitoring, and smart scheduling, are presented. Key technologies and their possible applications to Industry 4.0 smart manufacturing systems are reviewed based on these demonstrative scenarios. Finally, challenges and future perspectives are identified and discussed.

  3. Study of secular equilibrium reinstatement on UO{sub 2} pellets manufactured by AUC route

    Energy Technology Data Exchange (ETDEWEB)

    Carnaval, João Paulo R.; Beltran, Dalton J.M.C.; Oliveira, Carlos A., E-mail: joaocarnaval@inb.gov.br, E-mail: daltonbeltran@inb.gov.br, E-mail: carlossilva@inb.gov.br [Indústrias Nucleares do Brasil S.A. (INB), Resende, RJ (Brazil)

    2017-07-01

    The fuel assemblies manufactured by INB for Angra-1 power plant has axial blanket fuel rods which must be inspected due the columns formed by different enrichment pellets. The equipment used for inspection is built with a group of BGO scintillators detectors which measurement principle is based on the absorption of gamma rays emitted from Uranium decay. The commercial grade UF{sub 6} used by INB is stored into cylinders type 30B. The uranium inside these cylinders is in secular equilibrium before the processing. It has been found that the AUC route causes the loss of that equilibrium because the UF{sub 6} is volatilized from the cylinder and the uranium daughters remain in the container. As AUC is converted to powder and pellets, the secular equilibrium is restored through time. The purpose of this work is to present a study of the secular equilibrium reinstatement on UO{sub 2} pellets manufactured by AUC route before being inspected on Rod Scanner. (author)

  4. An investigation on the technical standard strategy for China's manufacturing industry

    International Nuclear Information System (INIS)

    Ma Limin; Jiang Xiangqian; Xu Zhengao; Li Zhu

    2005-01-01

    China's manufacturing industry is now the 4th largest manufacturing power in the world, second only to the US, Japan, and Germany. Large but not strong, it is still way behind developed countries. In the technical standard field, the gap between China's manufacturing industry and industrially developed countries is showing that there is a low level of technological standards and lack of professional talent versed in technical standards. A technical standards strategy is of importance to the development of China's manufacturing industry has been as one of the major strategies in the 10th Five-Year Plan period. The overall objective of the strategy for China's technical standards should be capable of supporting Chinese enterprises and products in entering the international market and ensuring the superiority of China's key industries in international competition. The implementing tactics of the strategy are all-round tracking, effective adoption, crucial participation, and strong dominance

  5. Artificial Immune Algorithm for Subtask Industrial Robot Scheduling in Cloud Manufacturing

    Science.gov (United States)

    Suma, T.; Murugesan, R.

    2018-04-01

    The current generation of manufacturing industry requires an intelligent scheduling model to achieve an effective utilization of distributed manufacturing resources, which motivated us to work on an Artificial Immune Algorithm for subtask robot scheduling in cloud manufacturing. This scheduling model enables a collaborative work between the industrial robots in different manufacturing centers. This paper discussed two optimizing objectives which includes minimizing the cost and load balance of industrial robots through scheduling. To solve these scheduling problems, we used the algorithm based on Artificial Immune system. The parameters are simulated with MATLAB and the results compared with the existing algorithms. The result shows better performance than existing.

  6. Profiles of Material Supplier Industries to the Automotive Manufacturers

    Science.gov (United States)

    1981-07-01

    This report presents a study of industries supplying materials to the automobile manufacturers. As the automobile industry restructures itself to produce more fuel-efficient vehicles, many of the industries that depend on the automobile will be force...

  7. Intelligent Manufacturing in the Context of Industry 4.0: A Review

    Directory of Open Access Journals (Sweden)

    Ray Y. Zhong

    2017-10-01

    Full Text Available Our next generation of industry—Industry 4.0—holds the promise of increased flexibility in manufacturing, along with mass customization, better quality, and improved productivity. It thus enables companies to cope with the challenges of producing increasingly individualized products with a short lead-time to market and higher quality. Intelligent manufacturing plays an important role in Industry 4.0. Typical resources are converted into intelligent objects so that they are able to sense, act, and behave within a smart environment. In order to fully understand intelligent manufacturing in the context of Industry 4.0, this paper provides a comprehensive review of associated topics such as intelligent manufacturing, Internet of Things (IoT-enabled manufacturing, and cloud manufacturing. Similarities and differences in these topics are highlighted based on our analysis. We also review key technologies such as the IoT, cyber-physical systems (CPSs, cloud computing, big data analytics (BDA, and information and communications technology (ICT that are used to enable intelligent manufacturing. Next, we describe worldwide movements in intelligent manufacturing, including governmental strategic plans from different countries and strategic plans from major international companies in the European Union, United States, Japan, and China. Finally, we present current challenges and future research directions. The concepts discussed in this paper will spark new ideas in the effort to realize the much-anticipated Fourth Industrial Revolution.

  8. Centers for manufacturing technology: Industrial Advisory Committee Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

  9. Study of skin and mucous membrane disorders among workers engaged in the sodium dichromate manufacturing industry and chrome plating industry.

    Science.gov (United States)

    Singhal, Vijay Kumar; Deswal, Balbir Singh; Singh, Bachu Narayan

    2015-01-01

    Inhalation of dusts and fumes arising during the manufacture of sodium dichromate from chrome ore, chromic acid mist emitted during electroplating, and skin contact with chromate produce hazards to workers. (1) To elucidate the prevalence of skin and mucous membrane disorders among the workers engaged in the sodium dichromate manufacturing industry and chrome plating industry. (2) To know the relationship of prevalence with the duration of exposure to chrome mist, dust, and fumes. A cross-sectional study was conducted among all the workers engaged in sodium dichromate manufacturing and chrome plating from several industries situated near the Delhi-Haryana border in the districts of Faridabad and Sonepat of Haryana, India from January 01, 2014 to December 31, 2014. All the workers available from the concerned industries for the study were interviewed and medically examined after obtaining their informed consent. A total of 130 workers comprising 66 workers from the sodium dichromate manufacturing industry and 64 workers from the chrome plating industry were examined on a pretested schedule. Descriptive statistical methods (proportions, relative risk, and Chi-square test of significance with P value analyzed using Epi Info version 7). All the workers were found to be males and of the adult age group. Out of the total examined, 69.69% and 56.22% of the workers had disorders of the nasal mucous membrane in the sodium dichromate manufacturing industry and the chrome plating industry, respectively. 42.42% and 28.22% of the workers had perforation of the nasal septum in the sodium dichromate manufacturing industry and chrome plating industry, respectively. 6.06% and 3.12% workers had skin ulcers in the sodium dichromate manufacturing industry and chrome plating industry, respectively. Nasal irritation and rhinorrhea were the most commonly found symptoms in both the processes. 48.48% and 90.52% of the workers were using hand gloves in the sodium dichromate manufacturing

  10. From domestic manufacture to Industrial Revolution

    DEFF Research Database (Denmark)

    Weisdorf, Jacob Louis

    2006-01-01

    industrial development. An emerging view, however, turns the old story on its head, arguing that agricultural improvement is a response to urban development. This paper follows the line of this emerging view, demonstrating that productivity growth in commercial manufacture is crucial to the performance...

  11. Industrial conflict and its management in selected Nigerian manufacturing companies

    Directory of Open Access Journals (Sweden)

    Solaja Oludele Mayowa

    2015-12-01

    Full Text Available This study examined industrial conflict and its management strategies in selected manufacturing companies in Lagos State, Nigeria. The study utilized co-relational survey method which involves the use of structured questionnaire and personal observation to elicit information from the respondents. Participants comprised of staffs of three manufacturing companies in Lagos, Nigeria. Multistage sampling technique was employed in selecting the respondents from the three manufacturing companies under the study. The data collected were analyzed using descriptive statistic including tables, frequency counts, and percentages as well as mean scores. The findings revealed that the causes of conflict in manufacturing companies in Lagos State, Nigeria include poor means of communicating grievances to top managers, unfavorable economic and industrial policies, poor employee compensation and welfare among others. Therefore, this study concluded that managers should combine strategies such as bargaining, collaboration and avoidance when dealing with industrial conflict to maintain cordial and productive labour-management relationship.

  12. Characterization of cyclical phases in the manufacturing industry in Spain

    Directory of Open Access Journals (Sweden)

    Mercè Sala

    2014-09-01

    Full Text Available 120 Purpose: The purpose of this paper is to characterize the cyclical phases of the manufacturing industry in Spain and detect which industries have more influence on the Spanish business cycle. We assume that economic growth is a priority; we are going to determine which industries have a more/less appropriate cyclical behavior according this priority. We analyze if the industries with better cyclical behavior are the ones that achieve greater co-movement with the business cycle of the Spanish economy, as this means they have a positive influence on economic activity. Design/methodology/approach: We examine the disaggregated quarterly IPI data of 16 manufacturing industries. Our methodology follows three steps. Firstly, we define cycle turning points; we follow the Harding and Pagan (2002 methodology. Secondly, we characterize the cyclical phases of the manufacturing industries in terms of duration, amplitude, deepness and steepness. We also determine the degree of inter-industrial cyclical synchronization and between industries in the cycle of the Spanish economy. This analysis is performed in two ways. On the one hand, we use the concordance index and the correlation coefficient. On the other hand, we work with indicators based on a consistency table. In the Third step, we apply a multi-objective methodology, specifically the compromise programming, to determine which industries have a more/less appropriate cyclical behavior according to the growth priority. Findings and Originality/value: The business cycle of the Spanish economy is positively influenced by high- and medium-tech industries, which have demonstrated their competitive capacity in international markets, and by medium- low-tech industries, with major strengths in R&D, and in survival and consolidation strategies. These results enable manufacturing industries to exert a positive effect on the business cycle that is weakened because many of them show a high correlation between

  13. A Mathematical Model for the Industrial Hazardous Waste Location-Routing Problem

    Directory of Open Access Journals (Sweden)

    Omid Boyer

    2013-01-01

    Full Text Available Technology progress is a cause of industrial hazardous wastes increasing in the whole world . Management of hazardous waste is a significant issue due to the imposed risk on environment and human life. This risk can be a result of location of undesirable facilities and also routing hazardous waste. In this paper a biobjective mixed integer programing model for location-routing industrial hazardous waste with two objectives is developed. First objective is total cost minimization including transportation cost, operation cost, initial investment cost, and cost saving from selling recycled waste. Second objective is minimization of transportation risk. Risk of population exposure within bandwidth along route is used to measure transportation risk. This model can help decision makers to locate treatment, recycling, and disposal centers simultaneously and also to route waste between these facilities considering risk and cost criteria. The results of the solved problem prove conflict between two objectives. Hence, it is possible to decrease the cost value by marginally increasing the transportation risk value and vice versa. A weighted sum method is utilized to combine two objectives function into one objective function. To solve the problem GAMS software with CPLEX solver is used. The problem is applied in Markazi province in Iran.

  14. Cybersecurity for industry 4.0 analysis for design and manufacturing

    CERN Document Server

    Schaefer, Dirk

    2017-01-01

    This book introduces readers to cybersecurity and its impact on the realization of the Industry 4.0 vision. It covers the technological foundations of cybersecurity within the scope of the Industry 4.0 landscape and details the existing cybersecurity threats faced by Industry 4.0, as well as state-of-the-art solutions with regard to both academic research and practical implementations. Industry 4.0 and its associated technologies, such as the Industrial Internet of Things and cloud-based design and manufacturing systems are examined, along with their disruptive innovations. Further, the book analyzes how these phenomena capitalize on the economies of scale provided by the Internet. The book offers a valuable resource for practicing engineers and decision makers in industry, as well as researchers in the design and manufacturing communities and all those interested in Industry 4.0 and cybersecurity.

  15. Study, design and manufacture eddy current probes for industry applications

    International Nuclear Information System (INIS)

    Nguyen Phuc; Nguyen Van Thuy; Vuong Binh Duong; Do Minh Duc; Trinh Dinh Truong; Tran Trong Duc; Do Tung Khanh; Dang Quang Trung

    2016-01-01

    This study is based on the studying, designing and manufacturing of eddy current probes for industry applications. The main tasks of this study include: i) Describes the overview and classification of eddy current probes (which can be classified into three categories based on the mode of operation: absolute eddy current probe, differential eddy current probe and reflect eddy current probe); ii) Describes the three methods of probe designing and manufacturing (including experimental, analytical and numerical designs); iii) Describes the designing and manufacturing of eddy current probes for industry applications, which based on experimental and analytical methods. Based on this study, we have successfully manufactured some current probes (including absolute eddy current probe, differential eddy current probe and reflect eddy current probe) for surface and tube inspections. (author)

  16. Understanding evolutionary processes in non-manufacturing industries: Empirical insights from the shakeout in pharmaceutical wholesaling

    OpenAIRE

    Adam J. Fein

    1998-01-01

    Although the empirical pattern of industry shakeout has been documented for many manufacturing industries, we know little about the processes by which market structure evolves in non-manufacturing service industries. This paper establishes detailed empirical observations about the consolidation of a single non-manufacturing industry, the wholesale distribution of pharmaceuticals. These observations are used to explore differences between manufacturing and wholesaling in both the patterns and ...

  17. The economic value of LNG in the Korean manufacturing industry

    International Nuclear Information System (INIS)

    Park, Sun-Young; Yoo, Seung-Hoon

    2013-01-01

    Although LNG is an important input to industrial production for manufacturing firms, its economic value has been rarely investigated in the literature. This paper attempts to estimate the economic value of LNG in Korea's manufacturing sector by employing the concept of the value of marginal product (VMP). For this, we used data on 328 firms using LNG as an input. Two types of production functions (the Cobb–Douglas and trans-log functions) are applied. The result of the specification test indicates that the trans-log function is more appropriate for estimating the data. The output elasticity and VMP of industrial LNG are estimated to be 0.1346 and KRW 6844 (USD 6.22) per m 3 , respectively. The results have important implications for various areas of industrial LNG management. For example, any cost–benefit analysis of new projects providing industrial LNG requires information on the economic value of industrial LNG. In addition, such information is useful for the Korean government's future policies on LNG pricing. - Highlights: • We estimate the economic value of LNG in the Korean manufacturing industry. • We employ the concept of the value of marginal product (VMP). • The VMP of industrial LNG is estimated to be KRW 6844 (USD 6.22) per m 3 . • It significantly outweighs the price of industrial LNG (KRW 629.4 per m 3 )

  18. The Near-Term Impacts of Carbon Mitigation Policies on Manufacturing Industries

    OpenAIRE

    Morgenstern, Richard; Shih, Jhih-Shyang; Ho, Mun; Zhang, Xuehua

    2002-01-01

    Who will pay for new policies to reduce carbon dioxide and other greenhouse gas emissions in the United States? This paper considers a slice of the question by examining the near-term impact on domestic manufacturing industries of both upstream (economy-wide) and downstream (electric power industry only) carbon mitigation policies. Detailed Census data on the electricity use of four-digit manufacturing industries is combined with input-output information on interindustry purchases to paint a ...

  19. Sustainability of fiber reinforced laminate and honeycomb composites in manufacturing industries

    Science.gov (United States)

    Asmatulu, Eylem; Alonayni, Abdullah; Alamir, Mohammed; Rahman, Muhammad M.

    2018-03-01

    Fiber reinforced polymer (FRP) composites provide a lot of benefits, including strength-to-weight ratio / light weight, superior mechanical properties, low maintenance, prolonged service life, as well as corrosion, fatigue and creep resistance. However, sustainability of the FRP composites have not been studied in detail in terms of long term productions in various industries, such as aerospace, wind energy, automotive and defense. Carbon fibers are relatively expensive because of the energy intensive production systems, and lack of easy production options, which forces many companies to recycle and reuse the FRP composites in the same or different manufacturing industries. This study mainly deals with two important issues, including the disposal of composite wastes generated during the manufacturing of composite parts, and the disposal of the products at the end of their useful life. It is believed that the carbon fibers in the used composites will have still high mechanical strengths to use in different composite manufacturing after its end of life. The major manufacturing costs come from the labor and raw materials, so using the recycled carbon fibers will make sustainable composite productions in other industries. This paper presents the current status and outlook of the FRP composite recycling and re-manufacturing techniques in the same or different industries. A future vision of the FRP composites will be investigated with sustainability point of views. This study will also mention about the sustainability issues in laminate and honeycomb composites, new product design and developments and potential applications in different manufacturing industries.

  20. Analysis of the effect of the Electron-Beam welding sequence for a fixed manufacturing route using finite element simulations applied to ITER vacuum vessel manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Martín-Menéndez, Cristina, E-mail: cristina@natec-ingenieros.com [Numerical Analysis Technologies, S.L. Marqués de San Esteban No. 52, 33206 Gijón (Spain); Rodríguez, Eduardo [Department of Mechanical Engineering, University of Oviedo, Campus de Gijón, 33203 Gijón (Spain); Ottolini, Marco [Ansaldo Nucleare S.p.A., Corso Perrone 25, 16152 Genova (Italy); Caixas, Joan [F4E, c/Josep Pla, n.2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Guirao, Julio [Numerical Analysis Technologies, S.L. Marqués de San Esteban No. 52, 33206 Gijón (Spain)

    2016-03-15

    Highlights: • The simulation methodology employed in this paper is able to adapt inside a complex manufacturing route. • The effect of the sequence is lower in a highly constrained assembly than in a lowly constrained one. • The most relevant influence on the distortions is the jigs design, instead of the welding sequence. • The welding distortion analysis should be used as a guidance to design and improve the manufacturing strategy. - Abstract: The ITER Vacuum Vessel Sectors have very tight tolerances and high density of welding. Therefore, prediction and reduction of welding distortion are critical to allow the final assembly with the other Vacuum Vessel Sectors without the production of a full scale prototype. In this paper, the effect of the welding sequence in the distortions inside a fixed manufacturing route and in a highly constrained assembly is studied in the poloidal segment named inboard (PS1). This is one of the four poloidal segments (PS) assembled for the sector. Moreover, some restrictions and limitations in the welding sequence related to the manufacturing process are explained. The results obtained show that the effect of the sequence is lower in a highly constrained assembly than in a low constrained one. A prototype manufactured by AMW consortium (PS1 mock-up) is used in order to validate the finite element method welding simulation employed. The obtained results confirmed that for Electron-Beam welds, both the welding simulation and the mock-up show a low value of distortions.

  1. Boron nitride nanoparticle enhanced prepregs: A novel route for manufacturing aerospace structural composite laminate

    Energy Technology Data Exchange (ETDEWEB)

    Kelkar, Ajit D., E-mail: kelkar@ncat.edu [Joint School of Nanoscience and Nanoengineering, North Carolina Agricultural and Technical State University, Greensboro, NC, 27401 (United States); Tian, Qiong [Joint School of Nanoscience and Nanoengineering, North Carolina Agricultural and Technical State University, Greensboro, NC, 27401 (United States); School of Science, Xi' an Jiaotong University, Xi' an, 710049 (China); Yu, Demei [School of Science, Xi' an Jiaotong University, Xi' an, 710049 (China); Zhang, Lifeng, E-mail: lzhang@ncat.edu [Joint School of Nanoscience and Nanoengineering, North Carolina Agricultural and Technical State University, Greensboro, NC, 27401 (United States)

    2016-06-15

    Boron nitride nanoparticles (BNNPs) were surface functionalized and subsequently applied to surface of fiberglass prepregs to fabricate hybrid BNNPs/fiberglass/epoxy composite laminate. A systematic and comparative study on BNNPs functionalization routes and their effects on morphology, mechanical property and thermal conductivity of final BNNPs enhanced composite laminates was performed. The functionalized BNNPs were characterized by Fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The composite laminates with surface functionalized BNNPs demonstrated improvement in tensile and flexural strength and modulus as well as in thermal conductivity compared to the composite laminate with pristine BNNPs while physically functionalized BNNPs outperformed chemically functionalized BNNPs in all cases. SEM images indicated better compatibility and dispersion of BNNPs in epoxy matrix following either of functionalization route. BNNPs bear great radiation-shielding capability. This investigation revealed a novel and industrially feasible route to incorporate BNNPs in aerospace structural materials. - Highlights: • BNNPs were surface functionalized and applied onto fiberglass prepreg. • The BNNPs enhanced prepreg was employed to make hybrid BNNPs/fiberglass/epoxy composite laminate. • The hybrid laminate presented significant improvement in mechanical strength and thermal conductivity. • This investigation revealed a novel and industrially feasible route to incorporate BNNPs in aerospace structural materials.

  2. Boron nitride nanoparticle enhanced prepregs: A novel route for manufacturing aerospace structural composite laminate

    International Nuclear Information System (INIS)

    Kelkar, Ajit D.; Tian, Qiong; Yu, Demei; Zhang, Lifeng

    2016-01-01

    Boron nitride nanoparticles (BNNPs) were surface functionalized and subsequently applied to surface of fiberglass prepregs to fabricate hybrid BNNPs/fiberglass/epoxy composite laminate. A systematic and comparative study on BNNPs functionalization routes and their effects on morphology, mechanical property and thermal conductivity of final BNNPs enhanced composite laminates was performed. The functionalized BNNPs were characterized by Fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The composite laminates with surface functionalized BNNPs demonstrated improvement in tensile and flexural strength and modulus as well as in thermal conductivity compared to the composite laminate with pristine BNNPs while physically functionalized BNNPs outperformed chemically functionalized BNNPs in all cases. SEM images indicated better compatibility and dispersion of BNNPs in epoxy matrix following either of functionalization route. BNNPs bear great radiation-shielding capability. This investigation revealed a novel and industrially feasible route to incorporate BNNPs in aerospace structural materials. - Highlights: • BNNPs were surface functionalized and applied onto fiberglass prepreg. • The BNNPs enhanced prepreg was employed to make hybrid BNNPs/fiberglass/epoxy composite laminate. • The hybrid laminate presented significant improvement in mechanical strength and thermal conductivity. • This investigation revealed a novel and industrially feasible route to incorporate BNNPs in aerospace structural materials.

  3. Design and manufacture of densitometer using in industrial radiography

    International Nuclear Information System (INIS)

    Nguyen Duc Huyen; Do Minh Duc; Vu Tien Ha; Dang Thanh Dung; Nguyen Do Kien

    2016-01-01

    Densitometer is a small device used to determine the darkness degree of radiography film. For improving the quality of the image on the film densitometer is indispensable equipment in sector related to the image, especially in the field of industrial imaging, radiographic. In Vietnam there are hundreds of densitometer devices, distributed to over 60 companies performing work on NDT sector and other companies. However, due to lack of maintenance, calibration and repair, many devices have been damaged, or unstable operation without any technical supports from the manufacturers. Up to now, Vietnam does not have any manufacturer (domestic and/or foreign) to research and development of the Densitometer. For these reasons, the scientists of Centre for Non-destructive Evaluation (NDE) with support from Vietnam Atomic Energy Institute (VINATOM) have successfully researched and manufactured the Densitometer using in industrial radiography in 2015.The equipment has been tested in practice and showed stable performance, measurement accuracy: ± 1% 0.02D; darkness range of film: 0.00 to 4.00D; repeated measurement values : ± 0.02D. The device meets ASTM 1079-00 standard for densitometer in industry. Especially, thanks to successful domestic manufacturing, the price of the device is only 60 % compared to the same imported products. (author)

  4. Changing Manufacturing Technology and Jobs in Defense Industries.

    Science.gov (United States)

    Oliver, Richard P.

    1983-01-01

    Provides information on the current status of computer-assisted manufacturing, current employment, and plans for new technology in three defense-related industries: aircraft, shipbuilding, and ordnance. (SK)

  5. Implementation of 5S in Manufacturing Industry: A Case of Foreign Workers in Melaka

    Directory of Open Access Journals (Sweden)

    Chee Houa San

    2018-01-01

    Full Text Available Lean manufacturing system has been infiltrated in manufacturing sectors across the world. In fact, Lean manufacturing system is a practice which regards the use of the resources, creation of value for the end customers, and as the ways to eliminate the waste. There are several tools that can be used to eliminate the waste within the industry. This research is a study of the implementation of 5S in manufacturing industry. Despite this, the research study focused on manufacturing industry, which has been implemented 5S system in Melaka State. Although there are number of tools and technique available to help in improving the manufacturing process, however, there is only few industries could implement the tools successfully. In this research, foreign workers play a main role in implement the 5S systems as the manufacturing industry in Malaysia adopt large amount of foreign workers to work as employees. Therefore, it is important to ensure the foreign workers truly understand the concept of 5S system and adopt the best ways to implement it in order to have better performance. This research study has been proposed by the research model of the barriers to implementation of 5S in manufacturing industry among foreign workers. A several research method has been adopted to do the research, such as descriptive research design with quantitative methods, survey questionnaire and cross-sectional studies.

  6. Are the determinants of markup size industry-specific? The case of Slovenian manufacturing firms

    Directory of Open Access Journals (Sweden)

    Ponikvar Nina

    2011-01-01

    Full Text Available The aim of this paper is to identify factors that affect the pricing policy in Slovenian manufacturing firms in terms of the markup size and, most of all, to explicitly account for the possibility of differences in pricing procedures among manufacturing industries. Accordingly, the analysis of the dynamic panel is carried out on an industry-by-industry basis, allowing the coefficients on the markup determinants to vary across industries. We find that the oligopoly theory of markup determination for the most part holds for the manufacturing sector as a whole, although large variability in markup determinants exists across industries within the Slovenian manufacturing. Our main conclusion is that each industry should be investigated separately in detail in order to assess the precise role of markup factors in the markup-determination process.

  7. Effects of environmental factors on corporate strategy and performance of manufacturing industries in Indonesia

    Directory of Open Access Journals (Sweden)

    Rachmad Hidayat

    2015-05-01

    Full Text Available Purpose: The purpose of this study was to examine and obtain empirical evidence of the effects of external and internal environmental factors on the strategy and performance of manufacturing companies. Design/methodology/approach: This study used primary data obtained by distributing questionnaires to 150 respondents of manufacturing companies in Indonesia spreading over six major cities in Java such as Jakarta, Banten, Bandung, Yogyakarta, Semarang and Surabaya. Samples were taken by using the systematic random sampling technique. The technique was used since those major cities had different numbers of manufacturing companies. Subsequently, the feasibility of the model was tested. Several indices of model feasibility would be used to test the model developed in this structural equation model. In case of a sub-optimal model, a model modification was to be performed by adding or removing paths so that the chi-square values would decrease by the values of the index. Findings and Originality/value: Results showed that internal and external environmental factors, through the operating environments and the remote environments of manufacturing industries, jointly affected the companies’ understanding of the condition of the industrial environments to establish strategic goals in order to achieve optimal performance of manufacturing industry. Practical implications: The internal and external environmental factors through the operating and remote environments had effects on the strategy of manufacturing companies in Indonesia. However, both internal and external environments did not affect the performance of manufacturing companies in Indonesia. There was a tendency that manufacturing companies were to observe the occurring macro-economic conditions. Manufacturing industries were faced with the pressures from competition, customers and suppliers that affected companies’ revenue. Performance of manufacturing industries was more influenced by macro

  8. Industrial conflict and its management in selected Nigerian manufacturing companies

    OpenAIRE

    Solaja Oludele Mayowa

    2015-01-01

    This study examined industrial conflict and its management strategies in selected manufacturing companies in Lagos State, Nigeria. The study utilized co-relational survey method which involves the use of structured questionnaire and personal observation to elicit information from the respondents. Participants comprised of staffs of three manufacturing companies in Lagos, Nigeria. Multistage sampling technique was employed in selecting the respondents from the three manufacturing companies und...

  9. The Influence Of Globalisation And Modern Technological Changes On Manufacturing Industries In Libya

    Directory of Open Access Journals (Sweden)

    Nuri M. Triki

    2017-05-01

    Full Text Available Globalisation and new technologies are having an intense impact on the manufacturing industries. This is affecting business global and might demand new strategies and policies for manufacturing companies. Libya like several other countries in the Middle East and also is among the few developing African economies has been facing problems related to its productivity in industrial sector. Manufacturing industries in Libya was reared to offer better products and services as part of the government plans to reconstruct their economy and improve its industrial companies. So as to face these problems manufacturing sectors need to increase their production and they also require a clear strategy and policies towards an efficient supply chain about modern technology. A new technology is one of the improvement initiatives that can be used to enhance industrial performance competitiveness and decrease its costs by eliminating of waste and increasing added value activities. The significance of new technology and modern systems in the industrial world has enhanced in this decade because of the benefits that they bring to the factories and companies. The aims of this research is to investigate new technology strategies that will enable the Libyan manufacturing industries to shift towards an increase production and reduce its costs as well as to quantify the modern technological changes and the role of globalisation in addition to declaration of its effect on the growth additionally development of the Libyan industrial sector and competitiveness lastly moreover this survey make a recommendations to establish systems that improve the emergent needs of the national industrial sector.

  10. Development of an ergonomics guideline for the furniture manufacturing industry.

    Science.gov (United States)

    Mirka, Gary A

    2005-03-01

    Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

  11. Energy resource management for energy-intensive manufacturing industries

    Energy Technology Data Exchange (ETDEWEB)

    Brenner, C.W.; Levangie, J.

    1981-10-01

    A program to introduce energy resource management into an energy-intensive manufacturing industry is presented. The food industry (SIC No. 20) was chosen and 20 companies were selected for interviews, but thirteen were actually visited. The methodology for this program is detailed. Reasons for choosing the food industry are described. The substance of the information gained and the principal conclusions drawn from the interviews are given. Results of the model Energy Resource Management Plan applied to three companies are compiled at length. Strategies for dissemination of the information gained are described. (MCW)

  12. Estimates of emergency operating capacity in US manufacturing and nonmanufacturing industries

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, D.B. (Pacific Northwest Lab., Richland, WA (USA)); Serot, D.E. (D/E/S Research, Richland, WA (USA)); Kellogg, M.A. (ERCE, Inc., Portland, OR (USA))

    1991-03-01

    Development of integrated mobilization preparedness policies requires planning estimates of available productive capacity during national emergency conditions. Such estimates must be developed in a manner that allows evaluation of current trends in capacity and the consideration of uncertainties in various data inputs and in engineering assumptions. This study, conducted by Pacific Northwest Laboratory (PNL), developed estimates of emergency operating capacity (EOC) for 446 manufacturing industries at the 4-digit Standard Industrial Classification (SIC) level of aggregation and for 24 key non-manufacturing sectors. This volume presents tabular and graphical results of the historical analysis and projections for each SIC industry. (JF)

  13. Waste reduction possibilities for manufacturing systems in the industry 4.0

    Science.gov (United States)

    Tamás, P.; Illés, B.; Dobos, P.

    2016-11-01

    The industry 4.0 creates some new possibilities for the manufacturing companies’ waste reduction for example by appearance of the cyber physical systems and the big data concept and spreading the „Internet of things (IoT)”. This paper presents in details the fourth industrial revolutions’ more important achievements and tools. In addition there will be also numerous new research directions in connection with the waste reduction possibilities of the manufacturing systems outlined.

  14. Complex deformation routes for direct recycling aluminium alloy scrap via industrial hot extrusion

    Science.gov (United States)

    Paraskevas, Dimos; Kellens, Karel; Kampen, Carlos; Mohammadi, Amirahmad; Duflou, Joost R.

    2018-05-01

    This paper presents the final results of an industrial project, aiming for direct hot extrusion of wrought aluminium alloy scrap at an industrial scale. Two types of complex deformation/extrusion routes were tested for the production of the same profile, starting from AA6060 scrap in form of machining chips. More specifically scrap-based billets were extruded through: a 2-porthole and a 4-porthole die-set, modified for enhanced scrap consolidation and grain refinement. For comparison reasons, cast billets of the same alloy were extruded through the modified 2-porthole die set. The tensile testing results as well as microstructural investigations show that the 4-porthole extrusion route further improves scrap consolidation compared to the 2-porthole die output. The successful implementation of solid state recycling, directly at industrial level, indicates the technological readiness level of this research.

  15. Study on the Transformation and Upgrade of E-Commerce Application in Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Zhao Liang

    2017-01-01

    Full Text Available Under the Internet thinking, manufacturing management mode is changed, it is not depend on the scale, but in the user as the center, more dependent on the reaction rate of user requirements. As the big data, cloud computing, Internet of things technology such as the development of technology, manufacturing is from automatic to intelligent evolution, on the user's personalized customization is possible. Using Internet thinking positive development manufacturing enterprise electronic commerce application mode of transformation and upgrading of manufacturing industry plays an important role. Promoting the continued ascent of manufacturing industry informatization level, promote the transformation of the manufacturing production mode, provide greater profit space for the export of products. In industrial 4.0 mode, the user is the core of the enterprise, C2B model will be the mainstream of future manufacturing e-commerce application mode. This paper to present the sorted out the basic model of manufacturing enterprise electronic commerce application, point out the existing problems, and the computing technology, communication technology, the constant development of storage technology, such as background, puts forward the corresponding countermeasure, points out that the C2B model is the development direction of manufacturing enterprise electronic commerce application mode.

  16. JT-60SA TF magnet industrial manufacturing preparation and qualifications

    International Nuclear Information System (INIS)

    Decool, P.; Cloez, H.; Gros, G.; Marechal, J.L.; Torre, A.; Verger, J.M.; Nusbaum, M.; Billotte, G.; Crepel, B.; Bourquard, A.; Davis, S.; Phillips, G.

    2014-01-01

    The general design of the JT-60SA toroidal field system was defined in agreement with all the participants in the project (CEA, ENEA, F4E), the detailed design was issued by the Voluntary Contributors. For the French part including the procurement of 9 of the 18 TF winding packs and their integration in the casings, an industrial contract was signed mid-2011 with Alstom (France). After agreement on manufacturing drawings and QA documentation, the manufacturing process was defined giving the guidelines for the workshop organization and the definition of the required tooling. The critical manufacturing points were identified in the process and, regarding technical requirements, have led to the definition of a set of qualification mockups. They are related to helium inlets, conductor winding and insulation, local conductor bending, electrical joint and terminal areas for the winding pack (WP), as well as winding embedding, case welding, and impregnations for WP integration in the casing. The fabrication processes have been improved and shall be qualified thanks to the manufacture and testing of 12 corresponding mockups. The successful achievement of several key mock-ups gives confidence in the feasibility of the manufacture, and their completion will give the green light to the industrial coils manufacture. (authors)

  17. Importance of wood from planted forests for manufacturing industry

    Directory of Open Access Journals (Sweden)

    Victor Almeida De Araujo

    2017-06-01

    Full Text Available The manufactured wood products are essential to modern society, since they are made from renewable and recyclable raw material, characterizing a sustainable input. The objective of this study was to elucidate the importance of wood from planted forests in forest products manufacture of higher added value, addressing forest and wood contexts of topics related to education, resources, products, industry, government incentives, public policies and markets. Different from Europe, it was verified that Brazil does not support positively this important industrial sector, nevertheless it still presents growth potential due to range of wooden-based products. Thus, wood could reach a prominent position in Brazilian economy, if strategies and incentives were defined by rules and public policies..

  18. [Noise hazard and hearing loss in workers in automotive component manufacturing industry in Guangzhou, China].

    Science.gov (United States)

    Wang, Zhi; Liang, Jiabin; Rong, Xing; Zhou, Hao; Duan, Chuanwei; Du, Weijia; Liu, Yimin

    2015-12-01

    To investigate noise hazard and its influence on hearing loss in workers in the automotive component manufacturing industry. Noise level in the workplace of automotive component manufacturing enterprises was measured and hearing examination was performed for workers to analyze the features and exposure levels of noise in each process, as well as the influence on hearing loss in workers. In the manufacturing processes for different products in this industry, the manufacturing processes of automobile hub and suspension and steering systems had the highest degrees of noise hazard, with over-standard rates of 79.8% and 57.1%, respectively. In the different technical processes for automotive component manufacturing, punching and casting had the highest degrees of noise hazard, with over-standard rates of 65.0% and 50%, respectively. The workers engaged in the automotive air conditioning system had the highest rate of abnormal hearing ability (up to 3.1%). In the automotive component manufacturing industry, noise hazard exceeds the standard seriously. Although the rate of abnormal hearing is lower than the average value of the automobile manufacturing industry in China, this rate tends to increase gradually. Enough emphasis should be placed on the noise hazard in this industry.

  19. Management Practice of Supply Chain Quality Management in Service-oriented Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Gu Ping

    2017-01-01

    Full Text Available Supply chain quality management (SCQM in service-oriented manufacturing industries is needed in delivering value to customers in all process of supply chain management based on total quality management (TQM. In the paper, we identify the latest themes through reviewing prior quality management and supply chain management(SCM literature. In particular, we find manufacturing firms transform from providing products towards providing services, which means they need to go through fundamental changes especially in supply chains. We use a case study of Heilan Home to illustrate the SCQM themes and their ways in industrial practice. Based on our research, the case study, the experience of working with this firm, we propose a SCQM performance evaluation framework, as well as four strategies for other industries to improve customer satisfaction and added value. In this way can promote the transformation and upgrading of the manufacturing industry in the perspective of quality.

  20. National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

    Science.gov (United States)

    Heidari, Farzin

    The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

  1. Prefabricated Construction using Digitally Integrated Industrial Manufacturing

    Directory of Open Access Journals (Sweden)

    Harry Giles

    2012-10-01

    Full Text Available The paper describes research being carried out in relation to prefabricated high density affordablehousing under a grant from the Partnership for the Advancement of Technology in Housing(PATH and the National Science Foundation (NSF in the USA. The objective is to demonstratehow a new paradigm for the conceptualization and construction of buildings can be conceivedof as an entirely factory based process that creates advantages for construction through industrialsystems technology transfer. Our approach is intended to transform design methodologythrough demonstrating how alternative construction concepts, using entirely pre-manufacturedvolumetric units, can be adopted. This involves digital modeling that facilitates parametric variationsfor creating customized prefabricated products from design conceptualization through tofinal product delivery. The paper discusses key areas under investigation in relation to a manufacturingparadigm used in the automotive industry that integrates virtual prototyping and industrialmanufacturing systems. Our research explores a type of monocoque volumetric unit prefabricatedin steel, which will be pre-finished as part of a modular factory-built approach usingindustrialized methodologies that will facilitate customized manufacture of a high quality energyefficient product for affordable housing.The paper addresses the automotive industry methods of manufacture that have served increasedautomobile performance and economics through mass production for over a century. In starkcontrast, the building industry and in particular the housing industry is still a century behind. It issuggested that a move away from tradition will require an industry wide initiative, just like HenryFord led the way with mass production. By embracing the increasing sophistication and capabilitythat digital technology offers, it is shown how digital tools are implemented towards masscustomization in house design using virtual modeling in the

  2. Characterization of cyclical phases in the manufacturing industry in Spain

    OpenAIRE

    Sala, Mercè; Torres, Teresa; Farré, Mariona

    2014-01-01

    Purpose: The purpose of this paper is to characterize the cyclical phases of the manufacturing industry in Spain and detect which industries have more influence on the Spanish business cycle. We assume that economic growth is a priority; we are going to determine which industries have a more/less appropriate cyclical behavior according this priority. We analyze if the industries with better cyclical behavior are the ones that achieve greater co-movement with the business cycle of the Spanish...

  3. Total quality through computer integrated manufacturing in the pharmaceutical industry.

    Science.gov (United States)

    Ufret, C M

    1995-01-01

    The role of Computer Integrated Manufacturing (CIM) in the pursue of total quality in pharmaceutical manufacturing is assessed. CIM key objectives, design criteria, and performance measurements, in addition to its scope and implementation in a hierarchical structure, are explored in detail. Key elements for the success of each phase in a CIM project and a brief status of current CIM implementations in the pharmaceutical industry are presented. The role of World Class Manufacturing performance standards and other key issues to achieve full CIM benefits are also addressed.

  4. Biocompatibility of Advanced Manufactured Titanium Implants—A Review

    Science.gov (United States)

    Sidambe, Alfred T.

    2014-01-01

    Titanium (Ti) and its alloys may be processed via advanced powder manufacturing routes such as additive layer manufacturing (or 3D printing) or metal injection moulding. This field is receiving increased attention from various manufacturing sectors including the medical devices sector. It is possible that advanced manufacturing techniques could replace the machining or casting of metal alloys in the manufacture of devices because of associated advantages that include design flexibility, reduced processing costs, reduced waste, and the opportunity to more easily manufacture complex or custom-shaped implants. The emerging advanced manufacturing approaches of metal injection moulding and additive layer manufacturing are receiving particular attention from the implant fabrication industry because they could overcome some of the difficulties associated with traditional implant fabrication techniques such as titanium casting. Using advanced manufacturing, it is also possible to produce more complex porous structures with improved mechanical performance, potentially matching the modulus of elasticity of local bone. While the economic and engineering potential of advanced manufacturing for the manufacture of musculo-skeletal implants is therefore clear, the impact on the biocompatibility of the materials has been less investigated. In this review, the capabilities of advanced powder manufacturing routes in producing components that are suitable for biomedical implant applications are assessed with emphasis placed on surface finishes and porous structures. Given that biocompatibility and host bone response are critical determinants of clinical performance, published studies of in vitro and in vivo research have been considered carefully. The review concludes with a future outlook on advanced Ti production for biomedical implants using powder metallurgy. PMID:28788296

  5. Biocompatibility of Advanced Manufactured Titanium Implants—A Review

    Directory of Open Access Journals (Sweden)

    Alfred T. Sidambe

    2014-12-01

    Full Text Available Titanium (Ti and its alloys may be processed via advanced powder manufacturing routes such as additive layer manufacturing (or 3D printing or metal injection moulding. This field is receiving increased attention from various manufacturing sectors including the medical devices sector. It is possible that advanced manufacturing techniques could replace the machining or casting of metal alloys in the manufacture of devices because of associated advantages that include design flexibility, reduced processing costs, reduced waste, and the opportunity to more easily manufacture complex or custom-shaped implants. The emerging advanced manufacturing approaches of metal injection moulding and additive layer manufacturing are receiving particular attention from the implant fabrication industry because they could overcome some of the difficulties associated with traditional implant fabrication techniques such as titanium casting. Using advanced manufacturing, it is also possible to produce more complex porous structures with improved mechanical performance, potentially matching the modulus of elasticity of local bone. While the economic and engineering potential of advanced manufacturing for the manufacture of musculo-skeletal implants is therefore clear, the impact on the biocompatibility of the materials has been less investigated. In this review, the capabilities of advanced powder manufacturing routes in producing components that are suitable for biomedical implant applications are assessed with emphasis placed on surface finishes and porous structures. Given that biocompatibility and host bone response are critical determinants of clinical performance, published studies of in vitro and in vivo research have been considered carefully. The review concludes with a future outlook on advanced Ti production for biomedical implants using powder metallurgy.

  6. Biocompatibility of Advanced Manufactured Titanium Implants-A Review.

    Science.gov (United States)

    Sidambe, Alfred T

    2014-12-19

    Titanium (Ti) and its alloys may be processed via advanced powder manufacturing routes such as additive layer manufacturing (or 3D printing) or metal injection moulding. This field is receiving increased attention from various manufacturing sectors including the medical devices sector. It is possible that advanced manufacturing techniques could replace the machining or casting of metal alloys in the manufacture of devices because of associated advantages that include design flexibility, reduced processing costs, reduced waste, and the opportunity to more easily manufacture complex or custom-shaped implants. The emerging advanced manufacturing approaches of metal injection moulding and additive layer manufacturing are receiving particular attention from the implant fabrication industry because they could overcome some of the difficulties associated with traditional implant fabrication techniques such as titanium casting. Using advanced manufacturing, it is also possible to produce more complex porous structures with improved mechanical performance, potentially matching the modulus of elasticity of local bone. While the economic and engineering potential of advanced manufacturing for the manufacture of musculo-skeletal implants is therefore clear, the impact on the biocompatibility of the materials has been less investigated. In this review, the capabilities of advanced powder manufacturing routes in producing components that are suitable for biomedical implant applications are assessed with emphasis placed on surface finishes and porous structures. Given that biocompatibility and host bone response are critical determinants of clinical performance, published studies of in vitro and in vivo research have been considered carefully. The review concludes with a future outlook on advanced Ti production for biomedical implants using powder metallurgy.

  7. User Cost of Debt-Financed Capital in Irish Manufacturing Industry: 1985 2011

    OpenAIRE

    KEARNEY, IDE; ZNUDERL, NUSA

    2013-01-01

    PUBLISHED This paper provides estimates of the cost of debt-financed capital to Irish manufacturing industry over the period 1985 to 2011. The estimates are provided for two types of capital assets, machinery and equipment and industrial buildings. They also incorporate policy interventions aimed at influencing investment behaviour of manufacturing firms in Ireland. The results show that large capital gains recorded during the Celtic Tiger period created a downward distortion in the user c...

  8. Customer-driven manufacturing in the food processing industry

    NARCIS (Netherlands)

    Donk, D.P. van

    2000-01-01

    Food processing industry copes with high logistical demands from its customers. This paper studies a company changing to more customer (order) driven manufacturing. In order to help decide which products should be made to order and which made to stock, a frame is developed and applied to find and

  9. Industrie 4.0: Network Formation on a Distributed Manufacturing Project

    Directory of Open Access Journals (Sweden)

    Luiz Fernando Cardoso dos Santos Durão

    2017-09-01

    Full Text Available The integration of modern internet technology and manufacturing technology, which has been denominated Industrie 4.0, allows for distributed manufacturing using additive manufacturing on a global scale with the integration of machines and processes. However, distributed manufacturing poses many challenges for standardization, quality control and management of information in different manufacturing sites. This article aims to investigate the formation of networks in distributed manufacturing projects, identifying the stake-holders and types of connections throughout the project. The methodological approach used was longitudinal action research for a distributed manufacturing project with a focus on flexible manufacturing. The central plant was located in Germany and the supplier located in Brazil, with a partnership between the Polytechnic School of the University of São Paulo and the Technical University of Darmstadt, Germany. The design and engineering that spawned the product model was developed in Germany, while the additive manufacturing site, the structure, and machinery was developed in Brazil, forming a development and distributed manufacturing network. The results showed how organized the communication and knowledge sharing was among those involved in the distributed manufacturing project, as well as an understanding of what kind of knowledge is shared among those involved.

  10. Industrial engineering studies for the manufacture of the ITER PF coils

    International Nuclear Information System (INIS)

    Libeyre, P.; Decool, P.; Guerin, O.; Perrella, M.; Bourquard, A.

    2007-01-01

    Industrial studies have been carried out in Europe to prepare the manufacture of the five poloidal field (PF) coils, which will be manufactured on the ITER site. A first study, carried out by Ansaldo Superconduttori, addressed the manufacturing sequence, assuming the manufacture of the PF coils inside the two buildings which will further host the cryogenic system. A second study, carried out by Alstom investigated how to achieve the manufacture of some crucial points. A new layout of the manufacturing line was proposed, aiming at manufacture of the PF2-6 coils within 36 months. A recent study performed by Alstom, assumes the manufacture of the PF coils in a single dedicated building, releasing so the constraint of meeting the deadline fixed in ITER reference scheme by the starting point of installation of the cryogenic components

  11. A Study to Determine the Educational Needs of Industrial Technologists in the Automotive-Type Manufacturing Industries.

    Science.gov (United States)

    Hall, Ronald Walter

    Questionnaires were used to gather data about educational needs of industrial technologists in the automotive-type manufacturing industries in the United States. Each of the 101 establishments received four questionnaires; 67 (66.3 percent) returned one or more of the questionnaires. The responses of the selected individuals were analyzed by…

  12. On the future of safety in the manufacturing industry

    OpenAIRE

    Reniers, G.

    2017-01-01

    Abstract: This paper argues that a new paradigm is needed in the manufacturing industry to further substantially advance safety as part of the industry 4.0 concept. The different domains that need to be focused upon are Cluster-thinking and cooperation, High transparency and efficient inspections, Education and training, Security integration, and Safety innovation. Since society has fundamentally changed over the last two decades, revolutionizing safety via these domains is truly needed in th...

  13. Industrial waste management within manufacturing: a comparative study of tools, policies, visions and concepts

    OpenAIRE

    Shahbazi, Sasha; Kurdve, Martin; Bjelkemyr, Marcus; Jönsson, Christina; Wiktorsson, Magnus

    2013-01-01

    Industrial waste is a key factor when assessing the sustainability of a manufacturing process or company. A multitude of visions, concepts, tools, and policies are used both academically and industrially to improve the environmental effect of manufacturing; a majority of these approaches have a direct bearing on industrial waste. The identified approaches have in this paper been categorised according to application area, goals, organisational entity, life cycle phase, and waste hierarchy stag...

  14. Strategic research on the sustainable development cost of manufacturing industry under the background of carbon allowance and trade policy

    Science.gov (United States)

    Ma, Zhongmin; Cheng, Mengting; Wang, Mei

    2017-08-01

    The important subjects of energy consumption and carbon emission are manufacturing enterprises, with the deepening of international cooperation, and the implementation of carbon limit and trade policy, costs of manufacturing industry will rise sharply. How can the manufacturing industry survive in this reform, and it has to be a problem that the managers of the manufacturing industry need to solve. This paper analyses sustainable development cost connotation and value basis on the basis of sustainable development concept, discusses the influence of carbon allowance and trade policy for cost strategy of manufacturing industry, thinks that manufacturing industry should highlight social responsibility and realize maximization of social value, implement cost strategy the sustainable development, and pointed out the implementation way.

  15. Blockchain Enhanced Emission Trading Framework in Fashion Apparel Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Bailu Fu

    2018-04-01

    Full Text Available Motivated by the recent blockchain technology originally built for bitcoin transactions, various industries are exploring the opportunities to redefine their existing operational systems. In this study, an innovative environmentally sustainable solution is proposed for the fashion apparel manufacturing industry (FAMI, which is energized by blockchain. Incorporating the Emission Trading Scheme (ETS, and a novel “emission link” system, the proposed framework exposes carbon emission to the public and establishes a feature to reduce the emissions for all key steps of clothing making. Fully compatible with Industry 4.0, blockchain provides decentralization, transparency, automation, and immutability characteristics to the proposed framework. Specifically, the blockchain supported ETS framework, the carbon emissions of clothing manufacturing life cycle, and the emission link powered procedures are introduced in detail. A case study is provided to demonstrate the carbon emission evaluation procedure. Finally, a multi-criteria evaluation is performed to demonstrate the benefits and drawbacks of the proposed system.

  16. Estimates of the economic contributions of the bidi manufacturing industry in India.

    Science.gov (United States)

    Nandi, Arindam; Ashok, Ashvin; Guindon, G Emmanuel; Chaloupka, Frank J; Jha, Prabhat

    2015-07-01

    Bidis, the most common smoking tobacco product in India, remain largely untaxed and are subject to very few regulations to discourage their use. A major argument against tax increases is the large potential loss of economic activity and employment in the bidi industry from reduced consumption. We used a nationally representative survey of unorganised bidi manufacturing firms (n=2841) in India to estimate the economic contribution of the industry. We find that of the 35 states and union territories of India, the bidi industry operated across 17 states, with over 95% of its production concentrated in 10 states. Bidi manufacturing firms contributed 0.50% of total sales and 0.6% of the gross value added by the manufacturing economy in 2005-2006. The industry employed approximately 3.4 million full-time workers, which comprise about 0.7% of employment in all sectors. A further 0.7 million were part-time workers. Bidi workers were also among the lowest paid employees in India. The industry offered only 0.09% of all compensation provided in the manufacturing sector (organised and unorganised). Considering the relatively small economic footprint of the bidi industry in India, higher excise taxes and regulations on bidis are unlikely to disrupt economic growth at an aggregate level, or lead to mass unemployment and economic hardship among small bidi workers. On average, the economic annual output per bidi worker is about US$143, which is an order of magnitude smaller than the large economic losses from the several hundred thousand deaths due to bidi smoking per year. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  17. Supply Chain and Blade Manufacturing Considerations in the Global Wind Industry (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    James, Ted [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goodrich, Alan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-12-12

    This briefing provides an overview of supply chain developments in the global wind industry and a detailed assessment of blade manufacturing considerations for U.S. end-markets. The report discusses the international trade flows of wind power equipment, blade manufacturing and logistical costs, and qualitative issues that often influence factory location decisions. To help guide policy and research and development strategy decisions, this report offers a comprehensive perspective of both quantitative and qualitative factors that affect selected supply chain developments in the growing wind power industry.

  18. "Industrie 4.0" and Smart Manufacturing – A Review of Research Issues and Application Examples

    OpenAIRE

    Klaus-Dieter Thoben; Stefan Wiesner; Thorsten Wuest

    2017-01-01

    A fourth industrial revolution is occurring in global manufacturing. It is based on the introduction of Internet of things and servitization concepts into manufacturing companies, leading to vertically and horizontally integrated production systems. The resulting smart factories are able to fulfill dynamic customer demands with high variability in small lot sizes while integrating human ingenuity and automation. To support the manufacturing industry in this conversion process and enhance glob...

  19. STRUCTURAL ALTERNATIVES OF RUSSIAN MANUFACTURING INDUSTRIES AND ARCHITECTURE OF TECHNOLOGICAL MODERNIZATION. PART 1

    Directory of Open Access Journals (Sweden)

    Izryadnova O. I.

    2014-06-01

    Full Text Available Continuing stagnation in the Russian economy makes a compelling case for structural reforms and transition to new technologies in non-financial sector. Given the backdrop of investor choice to wait out the situation and pause their investments, stagnation threatens to remain for longer. The biggest concerns are related to the slowdown in the range of high-tech non-resource manufacturing industries. These industries should become the cornerstone to foster the development of scientific, technical, and innovative potential of the country, overcoming the technical deficit, and implementation of modern technologies of the sixth technological generation. The article assesses the place and role of manufacturing industries in Russia’s economy and presents an analysis of dynamic shifts in their structure during the business cycle. The article demonstrates the results of empirical study of monitoring of innovative receptiveness of manufacturing industries. We discuss the directions of expanded cooperation between business and state. We also outline opportunities for correcting policies and tools directed at activating innovative functioning of the manufacturing sector in the view of the growth of geopolitical tensions, forms and methods of effective institutional management of the modernization of business units. It appears that the issues of investment maneuver to single out some types of economic activities, which manufacture products and services with high added value and increasing competitiveness of the Russian economy, call for the change in the model of economic development.

  20. STRUCTURAL ALTERNATIVES OF RUSSIAN MANUFACTURING INDUSTRIES AND ARCHITECTURE OF TECHNOLOGICAL MODERNIZATION. PART 2

    Directory of Open Access Journals (Sweden)

    Izryadnova O. I.

    2014-09-01

    Full Text Available Continuing stagnation in the Russian economy makes a compelling case for structural reforms and transition to new technologies in non-financial sector. Given the backdrop of investor choice to wait out the situation and pause their investments, stagnation threatens to remain for longer. The biggest concerns are related to the slowdown in the range of high-tech non-resource manufacturing industries. These industries should become the cornerstone to foster the development of scientific, technical, and innovative potential of the country, overcoming the technical deficit, and implementation of modern technologies of the sixth technological generation. The article assesses the place and role of manufacturing industries in Russia’s economy and presents an analysis of dynamic shifts in their structure during the business cycle. The article demonstrates the results of empirical study of monitoring of innovative receptiveness of manufacturing industries. We discuss the directions of expanded cooperation between business and state. We also outline opportunities for correcting policies and tools directed at activating innovative functioning of the manufacturing sector in the view of the growth of geopolitical tensions, forms and methods of effective institutional management of the modernization of business units. It appears that the issues of investment maneuver to single out some types of economic activities, which manufacture products and services with high added value and increasing competitiveness of the Russian economy, call for the change in the model of economic development.

  1. Toward industrialization: Supporting the manufacturing processes of superconducting cavities at DESY

    International Nuclear Information System (INIS)

    Buerger, J.; Dammann, J.A.; Hagge, L.; Iversen, J.; Matheisen, A.; Singer, W.

    2006-01-01

    Manufacturing high-gradient superconducting cavities for future accelerators requires detailed knowledge of the entire production process. This knowledge has to be transferred from the laboratories, which are developing the process, to industry in order to achieve reproducible results in the industrial production of large numbers of cavities. The paper introduces DESY's approach to process industrialization based on the use of an engineering data management system (EDMS)

  2. Relationship Between Lean Production and Operational Performance in the Manufacturing Industry

    Science.gov (United States)

    Rasi, Raja Zuraidah R. M.; Syamsyul Rakiman, Umol; Ahmad, Md Fauzi Bin

    2015-05-01

    Nowadays, more and more manufacturing firms have started to implement lean production system in their operations. Lean production viewed as one of the mechanism to maintain the organisation's position and to compete globally. However, many fail to apply the lean concepts successfully in their operations. Based on previous studies, implementation of lean production in the manufacturing industry is more focused on the relationship between Lean and Operational Performance of one dimension only. Therefore, this study attempted to examine the relationship between Lean Production (LP) and Operational Performance in 4 dimensions which are quality, delivery, cost and flexibility. This study employed quantitative study using questionnaires. Data was collected from 50 manufacturing industries. The data was analysed using Statistical Package for Social Science (SPSS) 22.0. This study is hoped to shed new understanding on the concept of Lean Production (LP) in regards of Operational Performance covering the 4 dimensions.

  3. A Preliminary Review on Economies of Scale (EOS Towards Industrialized Building System (IBS Manufacturer

    Directory of Open Access Journals (Sweden)

    Tajul Ariffin Syazwana

    2017-01-01

    Full Text Available Industrialized Building System (IBS is a potential technology to improve productivity of construction industry. Controlled production and minimum generation of construction waste are some of the benefits that can be achieved by replacing conventional construction with IBS. In business, IBS is giving a huge opportunity for manufacturer and supplier to expand their business while contributing to construction development. However, bad strategies will put the company in high risk due to higher initial capital for machines and equipment. Therefore, strategic planning for company’s growth, profit maximization, and enhancement of productivity is undeniable to ensure the success of business in construction industry. This preliminary paper is exploring associated factors that affect Economy of Scale (EOS and their relationships in catalyzing the IBS manufacturer especially precast concrete as the scope of study to continue their business in the construction industry. Thus, a framework of EOS is proposed to assist IBS manufacturers to ensure their company’s growth and stability, competitiveness in term of monopoly or an oligopoly, increasing productivity, leading constant returns to scale, and finally increasing the firm’s efficiency. The refined EOS’s conceptual framework is an important turning point to support the development of decision making tools for IBS manufacturer towards their stability and survival in this highly competitive industry.

  4. Energy-climate-manufacturing nexus: New insights from the regional and global supply chains of manufacturing industries

    International Nuclear Information System (INIS)

    Kucukvar, Murat; Cansev, Bunyamin; Egilmez, Gokhan; Onat, Nuri C.; Samadi, Hamidreza

    2016-01-01

    Highlights: • A multi region input–output sustainability assessment model is developed. • Energy-climate-manufacturing nexus within the context of global supply chains is investigated. • Electricity, Gas, and Water Supply sector is the main contributor to energy and carbon impacts. • Turkish regional manufacturing accounts for approximately 40–60% of total carbon emissions. • China, USA, and Rest-of-the World have the largest shares in the Turkish global energy footprint. - Abstract: The main objectives of this research are to improve our understanding of energy-climate-manufacturing nexus within the context of regional and global manufacturing supply chains as well as show the significance of full coverage of entire supply chain tiers in order to prevent significant underestimations, which might lead to invalid policy conclusions. With this motivation, a multi region input–output (MRIO) sustainability assessment model is developed by using the World Input–Output Database, which is a dynamic MRIO framework on the world’s 40 largest economies covering 1440 economic sectors. The method presented in this study is the first environmentally-extended MRIO model that harmonizes energy and carbon footprint accounts for Turkish manufacturing sectors and a global trade-linked carbon and energy footprint analysis of Turkish manufacturing sectors is performed as a case study. The results are presented by distinguishing the contributions of five common supply chain phases such as upstream suppliers, onsite manufacturing, transportation, wholesale, and retail trade. The findings showed that onsite and upstream supply chains are found to have over 90% of total energy use and carbon footprint for all industrial sectors. Electricity, Gas and Water Supply sector is usually found to be as the main contributor to global climate change, and Coke, Refined Petroleum, and Nuclear Fuel sector is the main driver of energy use in upstream supply chains. Overall, the

  5. 41 CFR 101-26.702 - Purchase of products manufactured by the Federal Prison Industries, Inc.

    Science.gov (United States)

    2010-07-01

    ... manufactured by the Federal Prison Industries, Inc. 101-26.702 Section 101-26.702 Public Contracts and Property... Defense § 101-26.702 Purchase of products manufactured by the Federal Prison Industries, Inc. (a) Purchases by executive agencies of prison-made products carried in GSA supply distribution facilities must...

  6. 77 FR 64462 - Conference on International Trade Issues Facing U.S. Machinery Manufacturing Industries

    Science.gov (United States)

    2012-10-22

    ... manufacturing is one of the largest and most competitive sectors of the American manufacturing economy. The... billion in 2011. The economic impact of machinery manufacturing extends throughout the American economy... service industries. Process control and other automation technologies enable end-users to maximize the...

  7. Applied simulation and optimization in logistics, industrial and aeronautical practice

    CERN Document Server

    Mota, Idalia; Serrano, Daniel

    2015-01-01

    Presenting techniques, case-studies and methodologies that combine the use of simulation approaches with optimization techniques for facing problems in manufacturing, logistics, or aeronautical problems, this book provides solutions to common industrial problems in several fields, which range from manufacturing to aviation problems, where the common denominator is the combination of simulation’s flexibility with optimization techniques’ robustness. Providing readers with a comprehensive guide to tackle similar issues in industrial environments, this text explores novel ways to face industrial problems through hybrid approaches (simulation-optimization) that benefit from the advantages of both paradigms, in order to give solutions to important problems in service industry, production processes, or supply chains, such as scheduling, routing problems and resource allocations, among others.

  8. Decade of PV Industry R and D Advances in Silicon Module Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Symko-Davis, M.; Mitchell, R.L.; Witt, C.E.; Thomas, H.P. [National Renewable Energy Laboratory; King, R.[U.S. Department of Energy; Ruby, D.S. [Sandia National Laboratories

    2001-01-18

    The US Photovoltaic (PV) industry has made significant technical advances in crystalline silicon (Si) module manufacturing through the PV Manufacturing R and D Project during the past decade. Funded Si technologies in this project have been Czochralski, cast polycrystalline, edge-defined film-fed growth (EFG) ribbon, string ribbon, and Si-film. Specific R and D Si module-manufacturing categories that have shown technical growth and will be discussed are in crystal growth and processing, wafering, cell fabrication, and module manufacturing. These R and D advancements since 1992 have contributed to a 30% decrease in PV manufacturing costs and stimulated a sevenfold increase in PV production capacity.

  9. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    International Nuclear Information System (INIS)

    Sani, Mohd Shafie; Aziz, Faieza Abdul

    2013-01-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  10. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    Science.gov (United States)

    Shafie Sani, Mohd; Aziz, Faieza Abdul

    2013-06-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  11. Ergonomics intervention in an Iranian television manufacturing industry.

    Science.gov (United States)

    Motamedzade, M; Mohseni, M; Golmohammadi, R; Mahjoob, H

    2011-01-01

    The primary goal of this study was to use the Strain Index (SI) to assess the risk of developing upper extremity musculoskeletal disorders in a television (TV) manufacturing industry and evaluate the effectiveness of an educational intervention. The project was designed and implemented in two stages. In first stage, the SI score was calculated and the Nordic Musculoskeletal Questionnaire (NMQ) was completed. Following this, hazardous jobs were identified and existing risk factors in these jobs were studied. Based on these data, an educational intervention was designed and implemented. In the second stage, three months after implementing the interventions, the SI score was re-calculated and the Nordic Musculoskeletal Questionnaire (NMQ) completed again. 80 assembly workers of an Iranian TV manufacturing industry were randomly selected using simple random sampling approach. The results showed that the SI score had a good correlation with the symptoms of musculoskeletal disorders. It was also observed that the difference between prevalence of signs and symptoms of musculoskeletal disorders, before and after intervention, was significantly reduced. A well conducted implementation of an interventional program with total participation of all stakeholders can lead to a decrease in musculoskeletal disorders.

  12. Manufacturing processes in the textile industry. Expert Systems for fabrics production

    OpenAIRE

    Bullon, Juan; González Arrieta, Angélica; Hernández Encinas, Ascensión; Queiruga Dios, Araceli

    2017-01-01

    The textile industry is characterized by the economic activity whose objective is the production of fibres, yarns, fabrics, clothing and textile goods for home and decoration,as well as technical and industrial purposes. Within manufacturing, the Textile is one of the oldest and most complex sectors which includes a large number of sub-sectors covering the entire production cycle, from raw materials and intermediate products, to the production of final products. Textile industry activities pr...

  13. Innovation performance and competitive strategies in the Turkish manufacturing industry

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz; Yeğenoğlu, Hande; Yegenoglu, Hande

    2007-01-01

    In this paper, we report on empirical investigation within the context of the Innovations in Manufacturing Industries in Turkey Study 2004/2005. The data was gathered in nine different cities in Turkey during the period August 2004 – January 2005. The survey was conducted through face-to-face interviews due to the complex nature of the survey and was implemented in 135 manufacturing firms operating in four sectors: Textiles, chemicals, food, and metal. The study has been an extension of the E...

  14. Supply Chain and Blade Manufacturing Considerations in the Global Wind Industry

    Energy Technology Data Exchange (ETDEWEB)

    James, Ted [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goodrich, Alan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-12-12

    Over the past decade, significant wind manufacturing capacity has been built in the United States in response to an increasingly large domestic market. Recent U.S. manufacturing production levels exceed anticipated near-term domestic demand for select parts of the supply chain, in part due to policy uncertainty, and this is resulting in some restructuring in the industry. Factor location decisions are influenced by a combination of quantitative and qualitative factors; proximity to end-markets is often a key consideration, especially for manufacturers of large wind turbine components. Technology advancements in the wind sector are continuing, and larger blade designs are being pursued in the market, which may increase U.S.-based manufacturing opportunities.

  15. Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Industry

    OpenAIRE

    Lidia Martínez Murillo

    2007-01-01

    Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its char...

  16. Export and Economic Growth in the Case of the Manufacturing Industry: Panel Data Analysis of Developing Countries

    Directory of Open Access Journals (Sweden)

    Emine Kılavuz

    2012-01-01

    Full Text Available The correlation between growth in export and economic growth, which is called “Export-led Growth Hypothesis” in the literature, is still a current issue in both the theoretical and empirical literature. In the present study, the effect of different classifications of export and import on economic growth in 22 developing countries in the 1998–2006 period was tested based on two models, via panel data analysis. According to the results of the first model, the analysis of which included variables such as high and low-tech manufacturing industry exports, investment and population, it was found that only two variables, high-tech manufacturing industry export and investment, have a positive and significant effect on growth. In addition to the first model which included the analysis of all variables, the second model investigated the effect of high and low-tech manufacturing industry imports on growth. The findings revealed that only high-tech manufacturing industry export, investment and low-tech manufacturing industry import have a positive and significant effect on growth.

  17. A mathematical model for environmental risk assessment in manufacturing industry

    Institute of Scientific and Technical Information of China (English)

    何莉萍; 徐盛明; 陈大川; 党创寅

    2002-01-01

    Environmental conscious manufacturing has become an important issue in industry because of market pressure and environmental regulations. An environmental risk assessment model was developed based on the network analytic method and fuzzy set theory. The "interval analysis method" was applied to deal with the on-site monitoring data as basic information for assessment. In addition, the fuzzy set theory was employed to allow uncertain, interactive and dynamic information to be effectively incorporated into the environmental risk assessment. This model is a simple, practical and effective tool for evaluating the environmental risk of manufacturing industry and for analyzing the relative impacts of emission wastes, which are hazardous to both human and ecosystem health. Furthermore, the model is considered useful for design engineers and decision-maker to design and select processes when the costs, environmental impacts and performances of a product are taken into consideration.

  18. Land transportation model for supply chain manufacturing industries

    Science.gov (United States)

    Kurniawan, Fajar

    2017-12-01

    Supply chain is a system that integrates production, inventory, distribution and information processes for increasing productivity and minimize costs. Transportation is an important part of the supply chain system, especially for supporting the material distribution process, work in process products and final products. In fact, Jakarta as the distribution center of manufacturing industries for the industrial area. Transportation system has a large influences on the implementation of supply chain process efficiency. The main problem faced in Jakarta is traffic jam that will affect on the time of distribution. Based on the system dynamic model, there are several scenarios that can provide solutions to minimize timing of distribution that will effect on the cost such as the construction of ports approaching industrial areas other than Tanjung Priok, widening road facilities, development of railways system, and the development of distribution center.

  19. Decomposing Brazilian manufacturing industry dynamics in the mid-2000s: Macroeconomic factors and their sectoral impacts

    Directory of Open Access Journals (Sweden)

    Edson Paulo Domingues

    2017-09-01

    Full Text Available The manufacturing industry's loss in participation, phenomena called “deindustrialization”, has been observed for the Brazilian economy for a while and seems to have intensified from mid-2000s. However, the literature has not developed a consistent or integrated analysis of this process. We have used a detailed simulation model to identify how macroeconomic factors (such as exchange rate, labor costs, and household consumption have contributed to manufacturing dynamics. Our results indicate that the macroeconomic scenario explains a large portion of the manufacturing industry's participation loss. The rise in households consumption and investment, important factors in this period, were responsible for dampening of the pressures coming from the currency appreciation and the workforce costs, benefiting some industrial sectors, but not avoiding the manufacturings participation loss. Keywords: Manufacturing, Growth, Development, Simulations, JEL classification: O14, C68, D58

  20. 77 FR 24722 - Draft Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes...

    Science.gov (United States)

    2012-04-25

    ...] Draft Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes... Manufacturing Process Changes, Including Emerging Technologies, on the Safety and Regulatory Status of Food... determining whether changes in manufacturing process, including the intentional reduction in particle size to...

  1. Strategic project selection based on evidential reasoning approach for high-end equipment manufacturing industry

    Directory of Open Access Journals (Sweden)

    Lu Guangyan

    2017-01-01

    Full Text Available With the rapid development of science and technology, emerging information technologies have significantly changed the daily life of people. In such context, strategic project selection for high-end equipment manufacturing industries faces more and more complexities and uncertainties with the consideration of several complex criteria. For example, a group of experts rather than a single expert should be invited to select strategic project for high-end equipment manufacturing industries and the experts may feel difficulty to express their preferences towards different strategic projects due to their limited cognitive capabilities. In order to handle these complexities and uncertainties, the criteria framework of strategic project selection is firstly constructed based on the characteristics of high-end equipment manufacturing industries and then evidential reasoning (ER approach is introduced in this paper to help experts express their uncertain preferences and aggregate these preferences to generate an appropriate strategic project. A real case of strategic project selection in a high-speed train manufacturing enterprise is investigated to demonstrate the validity of the ER approach in solving strategic project selection problem.

  2. Manufacturing capability as a technological development indicator in the pharmaceutical industry

    Directory of Open Access Journals (Sweden)

    John Jairo Gallo Castro

    2010-01-01

    Full Text Available The pharmaceutical industrial has five subsectors: medicines, cosmetics, phytotherapeutics, cleaning products and medical devices. The medicine subsector consists of organisations producing, importing and selling these products. Most studies about this industry have been guided by economic interests without assessing technological aspects of production. This article was aimed at proposing a methodology for assessing and describing the medicine sector according to its technological development by using the manufacturing capability concept. The main information was taken from the Colombian Medicaments and Food Surveillance Institute’s (Instituto Nacional de Vigilancia de Medicamentos y Alimentos - INVIMA databases related to pharmaceutical plant production in Bogotá, including material transformation facilities. This study led to three characteristics being identified for defining the pharmaceutical industry’s manufacturing capability: that related to the pharmacological group to which active pharmaceutical ingredients belong, that linked to specifications regarding medicines’ sterility and that related to the technology required for manufacturing each pharmaceutical product. An analysis of these features has thus been presented and some technologies have been identified which have not been transferred or assimilated by the organisations being studied. It was found that manufacturing capability should be considered as being an indicator of the degree of technological development in these subsectors in Colombia.

  3. Towards an industrial manufactured morphing trailing edge flap system for wind turbines

    DEFF Research Database (Denmark)

    Aagaard Madsen, Helge; Løgstrup Andersen, Tom; Bergami, Leonardo

    2014-01-01

    tunnel experiment in 2009 with promising results. This led in 2011 to initiation of a new research project INDUFLAP with the main aim to transfer the flap technology to industry as concerns manufacturing and testing. Three industrial partners are participating in the project. Rehau (DE) and Dansk Gummi...

  4. Social manufacturing

    OpenAIRE

    Hamalainen, Markko; Karjalainen, Jesse

    2017-01-01

    New business models harnessing the power of individuals have already revolutionized service industries and digital content production. In this study, we investigate whether a similar phenomenon is taking place in manufacturing industries. We start by conceptually defining two distinct forms of firm-individual collaboration in manufacturing industries: (1) social cloud manufacturing, in which firms outsource manufacturing to individuals, and (2) social platform manufacturing, in which firms pr...

  5. From a homemade to an industrial product : manufacturing Bulgarian yogurt

    NARCIS (Netherlands)

    Stoilova, E.R.

    2013-01-01

    Changes in yogurt production in the first half of the twentieth century were related to the transformation of dairy manufacturing through the incorporation of science and technology into the production process. The modernization of the dairy industry affected yogurt, which Bulgarians considered a

  6. THE IMPACT OF THE MANUFACTURING INDUSTRY ON THE ECONOMIC CYCLE OF EUROPEAN UNION COUNTRIES

    Directory of Open Access Journals (Sweden)

    Marcel Behun

    2018-03-01

    Full Text Available The manufacturing industry is a key sector in many national economies and is involved in creating sustainable economic growth. At the same time, it is a sector sensitive to internal and external impacts that result in fluctuations in the economic cycle, copying its development or even outstripping the development of economic cycles. The main objective of this contribution was to identify the relationship between manufacturing and GDP, which represents the economic cycle in European Union countries. The time series of selected indicators of the manufacturing industry and GDP from the Eurostat database for Q1 2000-Q4 2016 were used for analysis purposes. An analysis of 296 time series with a quarterly periodicity from 22 EU countries (including the United Kingdom was performed. The results of analyses indicate that the processing industry is a sector with significant cyclical behavior. In most countries, production and sales in the manufacturing industry behaved as concurrent indicators, changes in production and sales almost immediately reflected in the growth or decline in GDP. Labor market indicators have been shown to be delayed cyclical indicators. Changes in the economic development of the countries have a strong impact on employment, the remuneration of employees and the number of hours worked in the sector. Strong cyclical industries must be constantly monitored, as negative changes in these sectors will automatically exacerbate the economic cycle recession. The results of our analyses represent a valuable platform for economic policy makers and regional strategic plans.

  7. STATUS OF LEAN MANUFACTURING IMPLEMENTATION ON SECONDARY WOOD INDUSTRIES INCLUDING RESIDENTIAL, CABINET, MILLWORK, AND PANEL MARKETS

    OpenAIRE

    Adrian Pirraglia; Daniel Saloni; Herman van Dyk

    2009-01-01

    Lean Manufacturing has helped several industries to achieve operational and manufacturing excellence by increasing productivity and enhancing quality, while reducing waste and costs. However, the wood industry has been historically slow in adopting this philosophy and its many tools. In times when overseas competition has taken big portions of the traditional market share for U.S based wood industries, it has become important that companies start to take actions in order to regain competitive...

  8. Decomposition analysis of the change of energy intensity of manufacturing industries in Thailand

    International Nuclear Information System (INIS)

    Chontanawat, Jaruwan; Wiboonchutikula, Paitoon; Buddhivanich, Atinat

    2014-01-01

    The study computes and analyses the sources of the change of energy intensity of the manufacturing industries in Thailand during the period (1991–2011) using the decomposition method. The Logarithmic Mean Divisia Index is computed and the results show that the energy intensity in the period (1991–2000) increased greatly from the increased energy intensity of each industry. In the more recent period (2000–2011) the energy intensity declined a little. However the decline was mainly from the structural change effect with negligible contribution from decreased energy intensity of each industry. The findings imply the need to balance industrial restructuring policies with efforts to reduce energy intensity for a sustainable economic development. Besides, there is much room for individual industries to improve their energy efficiency. Policies on restructuring energy prices and other non-price related measures should be devised to induce individual industries, particularly the highly energy intensive ones, to reduce their energy intensity. - Highlights: • Decomposing change of energy intensity of Thai manufacturing industries, 1991–2011. • 1991–2000 energy intensity rose due to increased energy intensity of each industry. • 2000–2011 energy intensity declined due mainly to the structural change effect. • Need to balance industrial restructuring policies to reduce energy intensity

  9. Recent Regulatory Trends in Pharmaceutical Manufacturing and their Impact on the Industry.

    Science.gov (United States)

    Tabersky, Daniel; Woelfle, Michael; Ruess, Juan-Antonio; Brem, Simon; Brombacher, Stephan

    2018-03-30

    The pharmaceutical industry is one of the most regulated industries in Switzerland. Though the concept of good manufacturing practises (GMP) was implemented for chemical production in the early 1990s, the rules and regulations for our industry are in constant evolution. In this article we will highlight the impact of these changes to the industry using three recent guideline up-dates as examples: the implementation of ICH Q3D 'Guideline for elemental impurities', the EU-GMP Guideline Part III Chapter 'Guideline on setting health based exposure limits for use in risk identification in the manufacture of different medicinal products in shared facilities' from 01. June 2015, and the new guidelines to data integrity such as 'PIC/S 041-1 Good Practices for Data Management and Integrity in regulated GMP/GDP environments'. These examples show how scientific approaches help to modernize the control strategies for our products and increase product quality for a better patient safety. The requirements of data integrity regulations are also of interest to industries and universities not working under GxP requirements as they also support the business to improve data quality (traceability) for patent applications, and reduce risk of data falsification.

  10. Labor Agency in the Football Manufacturing Industry of Sialkot, Pakistan

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter

    2013-01-01

    be highly gendered and tends to be more constrained than facilitated by both vertical forces (the governance of GPNs) and horizontal forces (local socio-economic and labor market contexts). This is done through a case study of labor agency in the football manufacturing industry of Sialkot, Pakistan....

  11. Simple, cost effective & result oriented framework for supplier performance measurement in sports goods manufacturing industry

    Directory of Open Access Journals (Sweden)

    2011-09-01

    Full Text Available The emergences of global markets have increased competition worldwide. For the Sports Goods Manufacturing Industry which is considered to be an intensive supplier base industry with limited resources to sustain in what is already a very competitive market there is a need for the entire supply chain viz. raw material and machinery suppliers and manufacturers to measure their supplier's performance to reduce business risks and revenue losses. How to design & execute a simple, cost effective & result oriented Framework for Supplier Performance Measurement for sports goods manufacturing small - medium enterprises is the main aim of this research paper.

  12. Fundamental Theories and Key Technologies for Smart and Optimal Manufacturing in the Process Industry

    Directory of Open Access Journals (Sweden)

    Feng Qian

    2017-04-01

    Full Text Available Given the significant requirements for transforming and promoting the process industry, we present the major limitations of current petrochemical enterprises, including limitations in decision-making, production operation, efficiency and security, information integration, and so forth. To promote a vision of the process industry with efficient, green, and smart production, modern information technology should be utilized throughout the entire optimization process for production, management, and marketing. To focus on smart equipment in manufacturing processes, as well as on the adaptive intelligent optimization of the manufacturing process, operating mode, and supply chain management, we put forward several key scientific problems in engineering in a demand-driven and application-oriented manner, namely: ① intelligent sensing and integration of all process information, including production and management information; ② collaborative decision-making in the supply chain, industry chain, and value chain, driven by knowledge; ③ cooperative control and optimization of plant-wide production processes via human-cyber-physical interaction; and ④ life-cycle assessments for safety and environmental footprint monitoring, in addition to tracing analysis and risk control. In order to solve these limitations and core scientific problems, we further present fundamental theories and key technologies for smart and optimal manufacturing in the process industry. Although this paper discusses the process industry in China, the conclusions in this paper can be extended to the process industry around the world.

  13. Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Furniture Industry

    OpenAIRE

    Lidia Martínez Murillo

    2007-01-01

    Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its characteristics, structur...

  14. Critical success factors model developing for sustainable Kaizen implementation in manufactur-ing industry in Ethiopia

    Directory of Open Access Journals (Sweden)

    Haftu Hailu

    2017-12-01

    Full Text Available The purpose of the research is to identify critical success factors and model developing for sustaining kaizen implementation. Peacock shoe is one of the manufacturing industries in Ethiopia facing challenges on sustaining. The methodology followed is factor analysis and empirically testing hypothesis. A database was designed using SPSS version 20. The survey was validated using statistical validation using the Cronbach alpha index; the result is 0.908. The KMO index value was obtained for the 32 items and had a value of 0.642 with Bartlett's Test of Sphericity Approx. Chi-Square 4503.007, degree of freedom 496 and significance value 0.000. A factor analysis by principal components and varimax rotation was applied for finding the critical success factors. Finding designates that 32 items were merged into eight critical success factors. All the eight factors together explain for 76.941 % of the variance. Multiple regression model analysis has indicated that some of the critical success factors had relationship with success indicators. Due to constraint of time, the researcher focused only at peacock shoe manufacturing industry. Other limitation also includes the absence of any local research that shows the critical success factors at the moment.

  15. Exploring manufacturing competencies of a two wheeler manufacturing unit

    Science.gov (United States)

    Deep Singh, Chandan; Singh Khamba, Jaimal; Singh, Rajdeep; Singh, Navdeep

    2014-07-01

    The two wheeler industry of India is one of the most dependable industries as every person has at least a two wheeler with him, if not any four wheeler. Earlier there were scooters like Bajaj Chetak, Priya but with evolution of motorcycles like splendor, splendor+, etc. the scooter market started declining but with arrival of gearless scooters like Honda Activa, Scooty Pep, etc. the market place has become increasingly competitive in recent time and industries are facing tough test of improving products and thus market share. The competitiveness among industries is an important issue. Competency development is a vital tool to enhance the competitiveness of industries. Based, on aggregate performance of a firm, it comprehensively explores the varying importance of manufacturing competencies and drives of industrial competitiveness. Hence by, exploring the manufacturing competencies of a two wheeler industry, one can reflect the competitiveness of two wheeler manufacturing industry as a whole. This study presents various factors of manufacturing competencies affecting industrial competitiveness as the significance of these competencies is increasing day by day in two wheeler manufacturing industry.

  16. Exploring manufacturing competencies of a two wheeler manufacturing unit

    International Nuclear Information System (INIS)

    Singh, Chandan Deep; Khamba, Jaimal Singh; Singh, Rajdeep; Singh, Navdeep

    2014-01-01

    The two wheeler industry of India is one of the most dependable industries as every person has at least a two wheeler with him, if not any four wheeler. Earlier there were scooters like Bajaj Chetak, Priya but with evolution of motorcycles like splendor, splendor+, etc. the scooter market started declining but with arrival of gearless scooters like Honda Activa, Scooty Pep, etc. the market place has become increasingly competitive in recent time and industries are facing tough test of improving products and thus market share. The competitiveness among industries is an important issue. Competency development is a vital tool to enhance the competitiveness of industries. Based, on aggregate performance of a firm, it comprehensively explores the varying importance of manufacturing competencies and drives of industrial competitiveness. Hence by, exploring the manufacturing competencies of a two wheeler industry, one can reflect the competitiveness of two wheeler manufacturing industry as a whole. This study presents various factors of manufacturing competencies affecting industrial competitiveness as the significance of these competencies is increasing day by day in two wheeler manufacturing industry

  17. Relative risk analysis of several manufactured nanomaterials: an insurance industry context.

    Science.gov (United States)

    Robichaud, Christine Ogilvie; Tanzil, Dicksen; Weilenmann, Ulrich; Wiesner, Mark R

    2005-11-15

    A relative risk assessment is presented for the industrial fabrication of several nanomaterials. The production processes for five nanomaterials were selected for this analysis, based on their current or near-term potential for large-scale production and commercialization: single-walled carbon nanotubes, bucky balls (C60), one variety of quantum dots, alumoxane nanoparticles, and nano-titanium dioxide. The assessment focused on the activities surrounding the fabrication of nanomaterials, exclusive of any impacts or risks with the nanomaterials themselves. A representative synthesis method was selected for each nanomaterial based on its potential for scaleup. A list of input materials, output materials, and waste streams for each step of fabrication was developed and entered into a database that included key process characteristics such as temperature and pressure. The physical-chemical properties and quantities of the inventoried materials were used to assess relative risk based on factors such as volatility, carcinogenicity, flammability, toxicity, and persistence. These factors were first used to qualitatively rank risk, then combined using an actuarial protocol developed by the insurance industry for the purpose of calculating insurance premiums for chemical manufacturers. This protocol ranks three categories of risk relative to a 100 point scale (where 100 represents maximum risk): incident risk, normal operations risk, and latent contamination risk. Results from this analysis determined that relative environmental risk from manufacturing each of these five materials was comparatively low in relation to other common industrial manufacturing processes.

  18. Leukaemia incidence among workers in the shoe and boot manufacturing industry: a case-control study

    Directory of Open Access Journals (Sweden)

    Forand Steven P

    2004-08-01

    Full Text Available Abstract Background Previous reports have indicated an excess of leukaemia in Broome County, New York, particularly in the Town of Union. Surveillance of cancer incidence data indicates that a large proportion of these cases occurred among males ages 65 and older. Shoe and boot manufacturing has been the largest single industry in this area throughout much of the past century. Occupational studies from Europe suggest a link between leukaemia and employment in the shoe and boot manufacturing industry. However, researchers have not found a positive association between leukaemia and employment in the shoe industry among workers in the United States. Methods A matched case-control study was conducted to investigate the association between leukaemia incidence among males 65 and older and employment in the shoe and boot manufacturing industry. Thirty-six cases of leukaemia occurring between 1981–1990; among males age 65 and older; residing in the town of Union met the study case criteria. Death certificates were obtained for each of the cases. These were matched to death certificates of 144 controls on date of death and date of birth +/- 1 year. Death certificates were then examined to determine the employer and occupation of each study subject. Conditional logistic regression was used to determine the risk of leukaemia among those working in the industry. Results The risk of both leukaemia (OR = 1.47; 95% CI 0.70, 3.09 and acute myeloid leukaemia (OR = 1.19; 95% CI 0.33, 4.28 were elevated among those employed in the shoe and boot manufacturing industry, however neither was statistically significant. Conclusion The results, though suggestive of an association between leukaemia and employment in the shoe and boot manufacturing industry, were not statistically conclusive due mainly to limited study power. Several additional limitations may also have prevented the observance of more conclusive findings. Better exposure assessment, information on

  19. Nuclear engineering training and advanced training at universities and in manufacturing industries

    International Nuclear Information System (INIS)

    Sauer, A.

    1984-01-01

    The lecture describes: the qualification of the staff of one nuclear power plant building company, the structure of university studies in the Federal Republic of Germany, in the USA and in the GDR, technical colleges, continuation studies, in-service training in the manufacturing industry, training programmes for short-term benefits, training of German and foreign operating personnel by the manufacturers, training within the framework of technology transfer. (HSCH) [de

  20. A Swiss Manufacturer Sees the Industrial Revolution in England*

    Science.gov (United States)

    Buess, Heinrich

    1962-01-01

    I have recently come across the diaries of Johann Conrad Fischer. These diaries span six decades and cover the years of social, economic, and technological upheaval which marked the industrial revolution in England. The reader is given a picture of these years through the eyes of a Swiss manufacturer with a good perception of history, and his notes are of some value to historians. PMID:13874462

  1. The impact of fit manufacturing on green manufacturing: A review

    Science.gov (United States)

    Qi, Ang Nian; Sin, Tan Chan; Fathullah, M.; Lee, C. C.

    2017-09-01

    Fit manufacturing and Green manufacturing are a new trend principle and concept. They are getting popular in industrial. This paper is identifying the impact between Fit manufacturing and Green manufacturing. Besides Fit manufacturing, Lean manufacturing, Agile manufacturing and Sustainable manufacturing gives big impacts to Green Manufacturing. On top of that, this paper also discuss the benefits of applying Fit manufacturing and Green manufacturing in industrial as well as environment. Hence, applications of Fit manufacturing and Green Manufacturing are increasing year by year.

  2. Energy paybacks of six-sigma: A case study of manufacturing industry in India

    Directory of Open Access Journals (Sweden)

    Prabhakar Kaushik

    2016-11-01

    Full Text Available Industries, nowadays, are concerned about energy consumption and ever narrowing rules of emissions by the governments. Therefore, a race to clean; green and less energy consuming manufacturing is going on throughout the world. But in authors’ perspective, the major part of energy exploitation lies in the production of a rejected product. Therefore alongside the use of energy saving processes and machinery, industry should primarily look for rejection reduction. This, apart from energy saving and profitability, will add to the moral responsibility of every person toward nature. Here in this paper, authors describe a case study in which the increased rejection rate of a part of cycle chain assembly is controlled by the application of Six Sigma. Six Sigma, from many years has proved to be an ultimate solution when it comes to the application part in manufacturing industries. It’s very generic and easily applicable methodology has drawn tremendous positive results throughout the world. A financial gain of INR 0.267 million was yielded by implying six-sigma approach. In a move toward energy saving, the money saved by the project was used for green manufacturing to promote energy conservation.

  3. An ARIMA-Intervention Analysis Model for the Financial Crisis in China's Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    W.H. Ip

    2009-10-01

    Full Text Available Triggered by the subprime mortgage crisis in the United States (U.S., a financial tsunami has spread rapidly around the globe, from the U.S. to Europe and the rest of the world, causing the world economy to enter a recession. China is no exception, and has suffered a sharp reduction in the growth of its export and manufacturing sectors. In this paper, we attempt to model and analyze the impact of financial crisis on the manufacturing industry in China using data collected from March 2005 to November 2008 by the China Statistical Databases of the National Bureau of Statistics of China. The results indicate that China's manufacturing industry may have to tolerate a significant negative effect caused by the global financial crisis over a period of time, with its gross industrial output value declining continually throughout 2008 and 2009 before reaching a state of equilibrium. The intervention effect is described in this study as temporary but immediate and abrupt. It is found that the ARIMA-Intervention model is more precise at explaining and analyzing the intervention effects of the financial tsunami.

  4. Profit Allocation in Fuzzy Cooperative Games in Manufacturing and Logistics Industry

    Directory of Open Access Journals (Sweden)

    Xiaoyan Wang

    2014-05-01

    Full Text Available Purpose: Alliance between manufacturing and logistics industry is a new model of the joint development of the two industries. A reasonable profit allocation mechanism is the key to ensure the stable operation of the alliance, as well as to achieve the desired objectives. Based on uncertainty of alliance expected return as well as the inherent features of the alliance, this research establishes an improved model of profit allocation in manufacturing and logistics industry alliance.Design/methodology/approach: This article studies how to introduce comprehensive correction factors to improve interval Shapley value method, which is based on the fact that had been proved by exiting studies. In this study, interval Shapley value method is first applied to calculate the initial allocation of fuzzy cooperative games. Next AHP-GEM method and fuzzy comprehensive evaluation method are incorporated. Based on those results, an improved model of profit allocation is established. After that, a case study is demonstrated the practicality and feasibility of the improved model.Findings: Profit allocation is a complex issue in fuzzy cooperative games. There’re impacts from partner risk sharing, collaborative effort market competition, innovative contribution as well as resource investment. All these factors should be involved in the profit allocation, and different factors have different weight in importance.Practical implications: The new model established in the paper is more scientific and reasonable, and more in line with the actual situation. This method also provides good incentives to each enterprise to ensure the healthy and stable development of the alliance.Originality/value: Based on alliance characteristics, this paper establishes an indicator system and a new model for profit allocation in manufacturing and logistics industry alliance, using AHP-GEM method.

  5. Automation Architecture based on Cyber Physical Systems for Flexible Manufacturing within Oil&Gas Industry

    Directory of Open Access Journals (Sweden)

    Marcelo V García

    2018-03-01

    Full Text Available It is clear that in the next few years most of the technologies involved in the so-called Industry 4.0 will have a deep impact on manufacturing companies, including those related to Oil & Gas exploration and production. Low cost automation promotes reference architectures and development approaches aiming at increasing the flexibility and efficiency of production operations in industrial plants. In this sense, OPC UA, in addition to allowing companies to join the Industry 4.0 initiative, provides local and remote access to plant information, enabling a recognized mechanism for both, horizontal and vertical integration in a reliable, safe and efficient way. The contribution of this article is an open architecture for vertical integration based on cyber-physical production systems, configured under IEC 61499 and using OPC UA, suitable to achieve flexible manufacturing within Oil & Gas industry.

  6. From technology transfer to local manufacturing: China's emergence in the global wind power industry

    Science.gov (United States)

    Lewis, Joanna Ingram

    This dissertation examines the development of China's large wind turbine industry, including the players, the status of the technology, and the strategies used to develop turbines for the Chinese market. The primary goals of this research project are to identify the models of international technology transfer that have been used among firms in China's wind power industry; examine to what extent these technology transfers have contributed to China's ability to locally manufacture large wind turbine technology; and evaluate China's ability to become a major player in the global wind industry. China is a particularly important place to study the opportunities for and dynamics of clean energy development due to its role in global energy consumption. China is the largest coal consuming and producing nation in the world, and consequently the second largest national emitter of carbon dioxide after only the United States. Energy consumption and carbon emissions are growing rapidly, and China is expected to surpass the US and become the largest energy consuming nation and carbon dioxide emitter in coming decades. The central finding of this dissertation is that even though each firm involved in the large wind turbine manufacturing industry in China has followed a very different pathway of technology procurement for the Chinese market, all of the firms are increasing the utilization of locally-manufactured components, and many are doing so without transferring turbine technology or the associated intellectual property. Only one fully Chinese-owned firm, Goldwind, has succeeded in developing a commercially available large wind turbine for the Chinese market. No Chinese firms or foreign firms are manufacturing turbines in China for export overseas, though many have stated plans to do so. There already exists a possible niche market for the smaller turbines that are currently being made in China, particularly in less developed countries that are looking for less expensive

  7. The industrial resurgence of Southern California? Advanced ground transportation equipment manufacturing and local economic develoment

    OpenAIRE

    A J Scott; D Bergman

    1995-01-01

    Southern California is in a deeply rooted process of economic restructuring. Much of the region's manufacturing base is made up of two groups of industries: a declining aerospace - defense sector, and a low-wage, low-skill sweatshop sector. What are the prospects for creating a growing manufacturing base focused on high-wage, high-skill industries? In this paper we examine the opportunities presented by the Los Angeles County Metropolitan Transportation Authority's S183 billion thirty-year ca...

  8. Spring 2008 Industry Study. Manufacturing Industry

    Science.gov (United States)

    2008-01-01

    Chamber of Commerce puts the number of U.S. manufacturing jobs lost to piracy at 750,000 (U.S. Chamber of Commerce , 2007). Interviews with...economy each year and puts millions at risk from counterfeit medicines and engine parts (U.S. Chamber of Commerce , 2007). There are, however, several...Association of Manufacturers (NAM) and the U.S. Chamber of Commerce advocate global changes to IP protection, calling for the “reform and harmonization

  9. INNOVATIONS AS AN IMPORTANT FACTOR INFLUENCING LABOUR PRODUCTIVITY IN THE MANUFACTURING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Marija Bušelić

    2016-12-01

    Full Text Available Economic science has long recognized labour productivity as an important factor of economic growth. In the uncertain conditions of increasingly fierce and complex competition, it becomes one of the key prerequisites for an adequate response to global challenges. The development of labour productivity has to be observed as a multi-dimensional process including numerous interconnected quantitative and qualitative factors, in particular human factors and technological advancement realized through investments in research and development (innovations. The analysis of labour productivity in the manufacturing industry of the selected countries, Germany and China, is performed in the context of an important influential factor – innovations, and interdependently with the economic growth of the selected countries. The research results and the conducted regression analyses indicate a superiority of German labour productivity in the manufacturing industry, which is strongly affected by considerable investments in research and development. However, the technological convergence of China as the upcoming power is increasingly important, which shows that the gap in labour productivity is decreasing, making developed countries face new challenges posed by globalization. The analysis of the interdependence of economic growth (GDP and labour productivity in the manufacturing industry points to a positive link and the conclusion that the elasticity of the GDP to changes in labour productivity is greater in China than in Germany.

  10. INDICATORS FOR SUSTAINABILITY IN INDUSTRIAL SYSTEMS CASE STUDY: PAPER MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Maria Emiliana Fortună

    2011-12-01

    Full Text Available The paper describes a framework for promoting sustainability by using indicators for sustainable production. The concept of sustainable production is described as it is viewed by various organisms actions involved in the analysis of the sustainable industrial systems.The measure of sustainability is approached considering indicators of sustainable production, addressing both their dimensions and qualitative and quantitative features.The proposed framework refines the sustainability dimension for a case study which envisages sustainability in paper manufacturing. The analysis takes into account the life cycle analysis for the considered process since the environmental impact is seen as an essential sustainability indicator. Paper recycling and reuse is associated environmental and social costs, as a preferred alternative in waste minimization hierarchy in the manufacturing of non-trees eco-friendly paper.Proactive initiatives to improve the environmental performances of production process are considered as powerful tools for improving the paper manufacturing environmental footprint.

  11. Challenges and opportunities of fibre-reinforced polymers in additive manufacturing with focus on industrial applications

    DEFF Research Database (Denmark)

    Hofstätter, Thomas; Pedersen, David Bue; Tosello, Guido

    2017-01-01

    Functional parts made by additive manufacturing of polymers have entered the area of industrial applications in recent years providing a wide range of materials with various mechanical, thermal, and electrical properties. These additive manufacturing processes can be combined with known fibre...

  12. Life Cycle Design - a Route to the Sustainable Industrial Culture?

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Wenzel, Henrik; Alting, Leo

    1999-01-01

    In the attempt to reorient Society's development in a more sustainable direction attention is focused on the environmental impact of products and systems over their entire life cycle, but how can the environmental life cycle perspective be introduced into the design of new solutions and how much...... can be optained through life cycle design? The authors' experience with integration of environmental considerations in product development is presented, ranging from the detailed interactive approach to the EDIP-method through various simplified approaches. The potential for environmental improvements...... is reviewed and the overall question of to what extent life cycle design is a route to the sustainable industrial culture is discussed....

  13. Critical success factors model developing for sustainable Kaizen implementation in manufactur-ing industry in Ethiopia

    OpenAIRE

    Haftu Hailu; Abdelkadir Kedir; Getachew Bassa; Kassu Jilcha

    2017-01-01

    The purpose of the research is to identify critical success factors and model developing for sustaining kaizen implementation. Peacock shoe is one of the manufacturing industries in Ethiopia facing challenges on sustaining. The methodology followed is factor analysis and empirically testing hypothesis. A database was designed using SPSS version 20. The survey was validated using statistical validation using the Cronbach alpha index; the result is 0.908. The KMO index value was obtained for th...

  14. New developments in coordinate measuring machines for manufacturing industries

    Directory of Open Access Journals (Sweden)

    Hammad Mian S.

    2014-01-01

    Full Text Available There have been substantial improvements in measurement systems in order to meet fluctuating market demands. This rapid change and development in measurement technology has primarily been governed by demands of accuracy and precision from aerospace, automotive and other manufacturing industries. Coordinate measuring machines (CMMs available with different technologies and configurations has efficiently been fulfilling customer demands for more than a decade. Though, current CMMs can meet needs of rapid and increased demands of customers to a greater extent but still there is lot of scope for improvement and development in CMMs. The globalization of manufacturing has resulted in development of variety of complex products and miniaturization of mechanical components. The technology of micro/nano-scale 3D measurement is still a bottleneck for industries. Therefore, precise and accurate system which is flexible enough to deal with complexities of parts and micro & nano range products has to be investigated. In this paper, comprehensive review concerning CMMs with capabilities to measure micro/nano features has been presented. This work has also discussed different methods to estimate measurement uncertainty, as well as performance evaluation of CMMs. Moreover, novel concepts such as intelligent CMM, multi-sensor CMM, virtual CMM have been presented.

  15. Trends in innovation activities in manufacturing industries across development echelons

    Directory of Open Access Journals (Sweden)

    Abdullah M. Khan

    2017-07-01

    Full Text Available This empirical paper explores trends in innovation activities measured by a countries’ total patent application submission intensity relative to its population, and by analyzing U.S. granted patents data for cohorts of developed countries and developing countries. In addition to tabular and graphical analyses, I use a baseline regression model and a variant model thereof to assess the relative influence of a set of aggregate variables on innovation activities in eight manufacturing industries across two cohorts of countries (developed and developing where each cohort contains eight individual countries. Eight industries included in this study are: Chemical, Petroleum, electrical and electronics equipment, machinery, pharmaceutical, plastic, computer, and textile. The cohort of developed countries includes Australia, Canada, Czech Republic, France, Italy, Poland, Switzerland, and the United States. The cohort of developing countries includes Brazil, China, India, Malaysia, Mexico, Russia, South Africa, and Turkey. Per regression results, ethnic diversity is a statistically significant positive determinant of innovation for all industry aggregate patent count for both high income and developing countries. Also, per capita electricity usage, R&D expenditure as percent of GDP, and percent of population with internet access are three positive factors of innovation irrespective of industrial subsectors and position of a country in the development echelon. Interestingly, impact of ICT-services export is statistically significant and innovation boosting in developing countries in the cohort relative to countries in the cohort of developed countries. It also appears that trade openness served as a stronger stimulant of innovation activities for developing countries’ but not as much for the cohort of developed or high-income countries. This paper attempts to extend the literature on cross-country comparison of innovation activities by using two

  16. The Persistence of Abnormal Returns: Analysis of Polish Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Marcin Puziak

    2017-06-01

    Full Text Available The ultimate goal of a company is to build the enterprise value, which is achievable thanks to abnormal profits generated in particular period. Moreover, firms are expected to take measures to maintain abnormal profit in the future. On the other hand, abnormal profits attract competitors, who increase competition and as a result abnormal profits disappear. The persistence of profit is a term that describes a situation, when the company is successful in maintaining the abnormal profit over time. The main aim of this paper is to investigate the persistence of abnormal profit in Polish manufacturing sector. In other words, the question is whether Polish manufacturing companies are able to maintain their abnormal profits over time. The persistence of abnormal profits is investigated using dynamic panel model with generalized method-of-moments estimators. The method is applied to a panel of 5303 Polish companies from manufacturing sector observed over the period 2006-2014. This paper contributes to the existing literature in two ways. First, analysis is performed for developing country. Second, analysis is performed both at the level of entire sector and at division level. Three main conclusions can be drawn from the conducted research: there are significant differences between profit rates within the same industry at division level; estimated persistence of abnormal profit coefficients are at moderate level; there are substantial differences between estimated persistence of profit coefficients for divisions in the same industry.

  17. Final Rule: NESHAP for the Portland Cement Manufacturing Industry: Alternative Monitoring Method

    Science.gov (United States)

    EPA is extending its approval for the use of an alternative method to show compliance with hydrogen chloride (HCl) emissions limits in the National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing Industry

  18. Impact of Employment Agglomeration on Patented Innovation in U.S. Manufacturing Industries from 1986 to 2008

    Directory of Open Access Journals (Sweden)

    Abdullah M. Khan

    2014-10-01

    Full Text Available This paper examines impact of employment agglomeration in fifteen U.S. manufacturing industries on their innovation activities measured by patent count. A count data model is employed in regressing patent count on employment agglomeration measures, measure of scale, and some control variables. Measures of employment agglomeration and market concentration are found to have negative impacts on innovation in U.S. manufacturing industries. Two agglomeration proxies -Gini index and Ellison-Glaeser index have a negative influence on U.S. patented innovation for the study period. This result implies that the external benefit of spatial agglomeration of similar firms has waned down. The impact of market concentration is also found to be a negative factor for innovation. This result implies that firms with larger plant size are less innovative than those with smaller plant size. Impact of ‘share of workers with post graduate degrees’ on innovation was found to be a positive but statistically not significant factor for innovation. The ‘goods pooling’ determinant displayed negative influence on innovation. These results are mostly consistent across fifteen manufacturing subsectors. Rising energy cost is found to be one of the most significant deterrents of innovation whereas, ethnic diversity is found to be a significant facilitator of it. Results of this research lend support in favor of regional economic development policies that promote coagglomeration of various interdependent and complementary industries and small scale industries, and supports ethnic diversity to spur innovation in U.S. manufacturing industries.

  19. Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting

    Science.gov (United States)

    Leuders, Stefan; Vollmer, Malte; Brenne, Florian; Tröster, Thomas; Niendorf, Thomas

    2015-09-01

    Selective laser melting (SLM), as a metalworking additive manufacturing technique, received considerable attention from industry and academia due to unprecedented design freedom and overall balanced material properties. However, the fatigue behavior of SLM-processed materials often suffers from local imperfections such as micron-sized pores. In order to enable robust designs of SLM components used in an industrial environment, further research regarding process-induced porosity and its impact on the fatigue behavior is required. Hence, this study aims at a transfer of fatigue prediction models, established for conventional process-routes, to the field of SLM materials. By using high-resolution computed tomography, load increase tests, and electron microscopy, it is shown that pore-based fatigue strength predictions for a titanium alloy TiAl6V4 have become feasible. However, the obtained accuracies are subjected to scatter, which is probably caused by the high defect density even present in SLM materials manufactured following optimized processing routes. Based on thorough examination of crack surfaces and crack initiation sites, respectively, implications for optimization of prediction accuracy of the models in focus are deduced.

  20. Innovation and technical efficiency in Malaysian family manufacturing industries

    OpenAIRE

    Susila Munisamy; Edward Wong Sek Khin; Chia Zi Fon

    2015-01-01

    This study investigates the technical efficiency for each industry in the Malaysian manufacturing sector is estimated by using Data Envelopment Analysis (DEA). In order to pursue a balance of innovation between long-term and short-term performance strategy, we integrate the Balance Scorecard (BSC) approach with DEA. Furthermore, this paper looks at the determinants of efficiency using the Tobit regression model. In measuring the level of firms’ efficiency and innovation, the wood and wood b...

  1. Development and validation of resource flexibility measures for manufacturing industry

    Directory of Open Access Journals (Sweden)

    Gulshan Chauhan

    2014-01-01

    Full Text Available Purpose: Global competition and ever changing customers demand have made manufacturing organizations to rapidly adjust to complexities, uncertainties, and changes. Therefore, flexibility in manufacturing resources is necessary to respond cost effectively and rapidly to changing production needs and requirements.  Ability of manufacturing resources to dynamically reallocate from one stage of a production process to another in response to shifting bottlenecks is recognized as resource flexibility. This paper aims to develop and validate resource flexibility measures for manufacturing industry that could be used by managers/ practitioners in assessing and improving the status of resource flexibility for the optimum utilization of resources. Design/methodology/approach: The study involves survey carried out in Indian manufacturing industry using a questionnaire to assess the status of various aspects of resource flexibility and their relationships. A questionnaire was specially designed covering various parameters of resource flexibility. Its reliability was checked by finding the value of Cronback alpha (0.8417. Relative weightage of various measures was found out by using Analytical Hierarchy Process (AHP. Pearson’s coefficient of correlation analysis was carried out to find out relationships between various parameters. Findings: From detailed review of literature on resource flexibility, 17 measures of resource flexibility and 47 variables were identified. The questionnaire included questions on all these measures and parameters. ‘Ability of machines to perform diverse set of operations’ and ability of workers to work on different machines’ emerged to be important measures with contributing weightage of 20.19% and 17.58% respectively.  All the measures were found to be significantly correlated with overall resource flexibility except ‘training of workers’, as shown by Pearson’s coefficient of correlation. This indicates that

  2. New routes to the functionalization patterning and manufacture of graphene-based materials for biomedical applications.

    Science.gov (United States)

    De Sanctis, A; Russo, S; Craciun, M F; Alexeev, A; Barnes, M D; Nagareddy, V K; Wright, C D

    2018-06-06

    Graphene-based materials are being widely explored for a range of biomedical applications, from targeted drug delivery to biosensing, bioimaging and use for antibacterial treatments, to name but a few. In many such applications, it is not graphene itself that is used as the active agent, but one of its chemically functionalized forms. The type of chemical species used for functionalization will play a key role in determining the utility of any graphene-based device in any particular biomedical application, because this determines to a large part its physical, chemical, electrical and optical interactions. However, other factors will also be important in determining the eventual uptake of graphene-based biomedical technologies, in particular the ease and cost of manufacture of proposed device and system designs. In this work, we describe three novel routes for the chemical functionalization of graphene using oxygen, iron chloride and fluorine. We also introduce novel in situ methods for controlling and patterning such functionalization on the micro- and nanoscales. Our approaches are readily transferable to large-scale manufacturing, potentially paving the way for the eventual cost-effective production of functionalized graphene-based materials, devices and systems for a range of important biomedical applications.

  3. 2001 Industry Studies: Advanced Manufacturing

    Science.gov (United States)

    2001-05-28

    oriented, 19 and manufacturers are employing the Internet and associated information technologies to better integrate supply chains and form extended...ways to compete in world markets . As part of this ongoing transformation, the broad implementation of advanced manufacturing technologies , processes...competitive advantages and better performance in world markets . Importantly, advanced manufacturing involves the innovative integration of new technology

  4. Industrial Production and Professional Application of Manufactured Nanomaterials-Enabled End Products in Dutch Industries: Potential for Exposure

    NARCIS (Netherlands)

    Bekker, C.; Brouwer, D.H.; Tielemans, E.; Pronk, A.

    2013-01-01

    Background: In order to make full use of the opportunities while responsibly managing the risks of working with manufactured nanomaterials (MNM), we need to gain insight into the potential level of exposure to MNM in the industry. Therefore, the goal of this study was to obtain an overview of the

  5. Productivity and Openness: Firm Level Evidence in Brazilian Manufacturing Industries

    OpenAIRE

    Wenjun Liu; Shoji Nishijima

    2012-01-01

    This study investigates the productivity of Brazilian manufacturing industries, particularly addressing the influence of liberalization on productivity. We first calculate total factor productivity (TFP) by estimating the stochastic frontier production function and the inefficiency determination equation simultaneously. Then TFP growth rates are regressed on openness-related variables and other firm characteristics. The results show that firm openness to the world is a crucial determinant of ...

  6. Technological assessment of local manufacturers for wind turbine blade manufacturing in Pakistan

    Science.gov (United States)

    Mahmood, Khurram; Haroon, General

    2012-11-01

    Composite materials manufacturing industry is one of the world's hi-tech industry. Manufacturing of wind turbine blades is one of the specialized fields requiring high degree of precision and composite manufacturing techniques. This paper identifies the industries specializing in the composite manufacturing and is able to manufacture wind turbines blades in Pakistan. In the second phase, their technology readiness level is determined, based on some factors and then a readiness level are assigned to them. The assigned technology readiness level will depict the absorptive capacity of each manufacturing unit and its capability to take on such projects. The individual readiness level of manufacturing unit will then be used to establish combined technology readiness level of Pakistan particularly for wind turbine blades manufacturing. The composite manufacturing industry provides many spin offs and a diverse range of products can be manufactured using this facility. This research will be helpful to categorize the strong points and flaws of local industry for the gap analysis. It can also be used as a prerequisite study before the evaluation of technologies and specialties to improve the industry of the country for the most favorable results. This will form a basic data base which can be used for the decision making related to transfer of technology, training of local skilled workers and general up-gradation of the local manufacturing units.

  7. Competitive manufacturing strategies for the manufacturing industries in Turkey

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz

    2003-01-01

    In this study, results of the research into competitive manufacturing strategies of companies in four different sector studies covering 82 companies from the electronics, cement, automotive manufacturers, and appliances part and component suppliers in Turkey are presented. The data used in the study are gathered by conducting four sector surveys in 1997 and 1998 using a questionnaire supported by some follow-up interviews and site visits. A competitive manufacturing strategy is represented he...

  8. Investigation of the prominent barriers to lean manufacturing implementation in Malaysian food and beverages industry using Rasch Model

    Science.gov (United States)

    Khusaini, N. S.; Ismail, A.; Rashid, A. A.

    2016-02-01

    This paper presents a preliminary study on the prominent barriers to lean manufacturing implementation in Malaysian Food and Beverages Industry. A survey was carried out to determine the most prominent barriers of lean manufacturing implementation that are currently being faced in this industry. The amount of barriers identified for this study is twenty seven. Out of 1309 available organizations, a total of 300 organizations have been randomly selected as respondents, and 53 organizations responded. From the variable map, the analysis shows that, the negative perception towards lean manufacturing top the list as the most agreeable barrier, while the technical barriers came after it. It can also be seen from the variable map that averagely, lack of vision and direction is the barrier that is being faced. Finally, this is perhaps the first attempt in investigating the prominent barriers to Lean Manufacturing implementation in Malaysian food and beverages industry using Rasch Model.

  9. Software defined networking firewall for industry 4.0 manufacturing systems

    Directory of Open Access Journals (Sweden)

    Akihiro Tsuchiya

    2018-04-01

    Full Text Available Purpose: In order to leverage automation control data, Industry 4.0 manufacturing systems require industrial devices to be connected to the network. Potentially, this can increase the risk of cyberattacks, which can compromise connected industrial devices to acquire production data or gain control over the production process. Search engines such as Sentient Hyper-Optimized Data Access Network (SHODAN can be perverted by attackers to acquire network information that can be later used for intrusion. To prevent this, cybersecurity standards propose network architectures divided into several networks segments based on system functionalities. In this architecture, Firewalls limit the exposure of industrial control devices in order to minimize security risks. This paper presents a novel Software Defined Networking (SDN Firewall that automatically applies this standard architecture without compromising network flexibility.   Design/methodology/approach: The proposed SDN Firewall changes filtering rules in order to implement the different network segments according to application level access control policies. The Firewall applies two filtering techniques described in this paper: temporal filtering and spatial filtering, so that only applications in a white list can connect to industrial control devices. Network administrators need only to configure this application-oriented white lists to comply with security standards for ICS. This simplifies to a great extent network management tasks. Authors have developed a prototype implementation based on the OPC UA Standard and conducted security tests in order to test the viability of the proposal. Findings: Network segmentation and segregation are effective counter-measures against network scanning attacks. The proposed SDN Firewall effectively configures a flat network into virtual LAN segments according to security standard guidelines. Research limitations/implications: The prototype implementation still

  10. SMEs in the Philippine Manufacturing Industry and Globalization: Meeting the Development Challenges

    OpenAIRE

    Aldaba, Rafaelita M.

    2008-01-01

    In recognition of their substantial contribution to the economy both in terms of number of enterprises and workers, the Philippine government has put in place a number of policies and programs designed specifically to boost SME productivity and competitiveness in the country. However, the performance of SMEs in the last decade has not been vigorous enough to boost the Philippine manufacturing industry. As such, the deepening of high technology industries in terms of the creation of backward l...

  11. Dynamics of vendor innovation capability: Evidence from the Electronics Manufacturing Services industry

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

    2012-01-01

    and innovation. The first is the realization that vendor capabilities have been recognized as one of the most important factors for the success of outsourcing. The second refers to the fact that, even though innovation capability is required, vendors are still being selected, and their performance evaluated......, by traditional manufacturing capabilities, such as cost, quality, delivery, and flexibility. Taking a vendor’s perspective in outsourcing, we develop and present a conceptual framework for studying vendor innovation capability. We propose to test this framework in the Electronic Manufacturing Services Industry....

  12. Review of data mining applications for quality assessment in manufacturing industry: support vector machines

    Directory of Open Access Journals (Sweden)

    Rostami Hamidey

    2015-01-01

    Full Text Available In many modern manufacturing industries, data that characterize the manufacturing process are electronically collected and stored in databases. Due to advances in data collection systems and analysis tools, data mining (DM has widely been applied for quality assessment (QA in manufacturing industries. In DM, the choice of technique to be used in analyzing a dataset and assessing the quality depend on the understanding of the analyst. On the other hand, with the advent of improved and efficient prediction techniques, there is a need for an analyst to know which tool performs better for a particular type of dataset. Although a few review papers have recently been published to discuss DM applications in manufacturing for QA, this paper provides an extensive review to investigate the application of a special DM technique, namely support vector machine (SVM to deal with QA problems. This review provides a comprehensive analysis of the literature from various points of view as DM concepts, data preprocessing, DM applications for each quality task, SVM preliminaries, and application results. Summary tables and figures are also provided besides to the analyses. Finally, conclusions and future research directions are provided.

  13. The Impact of Soft Factors on Quality Improvement in Manufacturing Industry

    Science.gov (United States)

    Chan, Shiau Wei; Fauzi Ahmad, Md; Kong, Mei Wan

    2017-08-01

    Nowadays, soft factors have become the key factors of success in quality improvement of an organisation. Many organisations have neglected the importance of soft factors, this may influence the organisational performance. Hence, the purpose of this research is to examine the impact of soft factors on quality improvement in manufacturing industries. Six hypotheses were examined while considering six dimensions of soft factors including management commitment, customer focus, supplier relationship, employee involvement, training and education, and reward and recognition that have a positive impact on quality improvement. In this study, eighty one managers from the quality department were randomly selected in the manufacturing industry in Batu Pahat, Johor. The questionnaires were distributed to them. The researcher analysed the quantitatively collected data using descriptive analysis and correlation analysis. The findings of this study revealed that all soft factors are correlated to the quality improvement in an organisation with a high significant value but the regression analysis shows that the supplier relationship and employee involvement has more significant impact on quality improvement as compared to other soft factors which contributes of this study.

  14. Tendency of Embodied Carbon Change in the Export Trade of Chinese Manufacturing Industry from 2000 to 2015 and Its Driving Factors

    Directory of Open Access Journals (Sweden)

    Ji Guo

    2018-06-01

    Full Text Available The manufacturing industry is an important part of the national industrial system, and is usually an industry with high carbon content. However, few studies have been carried out on the total amount, structure and the trend of the embodied carbon emission in the international trade of the Chinese manufacturing industry. Based on the input–output method, the thesis proposes the coefficient of direct carbon emission and complete carbon emission and a method for calculating the embodied carbon of the export trade. It also calculates the coefficient of direct carbon emission and complete carbon emission for the Chinese manufacturing sector from 2000 to 2015 and breaks down the embodied carbon change of export trade in the manufacturing industry to a technological effect, structural effect and scale effect by using the method of structural decomposition. Several inspiring conclusions could be drawn from the thesis. For example: (1 the coefficient of both the direct carbon emission and the complete carbon emission has been decreasing significantly, indicating the achievements of the energy saving and emission reduction of the Chinese manufacturing industry. (2 The embodied carbon emission from the manufacturing exports remains high and presents a rising tendency. The main sectors that export the embodied carbon includes “S10 mechanical equipment and instruments”, “S9 metal products”, “S6 chemical industry”, etc., which should be the key sectors on reducing embodied carbon in exports. (3 The driving force of the embodied carbon exports lies in the scale effect of the manufacturing industry, on which the technical effect of the industry has a significant negative effect. The structural effect should have a positive influence that takes on a rising tendency; generally, this effect is only two-thirds of the scale effect. Finally, the corresponding policy suggestions have been made.

  15. The practice and perception of precautionary allergen labelling by the Australasian food manufacturing industry.

    Science.gov (United States)

    Zurzolo, G A; Peters, R L; Koplin, J J; de Courten, M; Mathai, M L; Tye-Din, J A; Tang, M L K; Campbell, D E; Ponsonby, A-L; Prescott, S L; Gurrin, L; Dharmage, S C; Allen, K J

    2017-07-01

    The precautionary allergen labelling (PAL) and Voluntary Incidental Trace Allergen Labelling (VITAL ® ) tools were designed by industry to assist consumers with selecting safe foods for consumption. However, a sizeable proportion of food products bear no label, and it is unclear whether these products are free from allergens and therefore safe to consume or have simply not undergone a risk assessment and therefore remain unlabelled for that reason. To assess the prevalence of unlabelled products that have undergone a risk assessment process and to examine the factors influencing industry's uptake of the VITAL ® process. A web-based questionnaire was distributed to Australasian food and grocery manufacturers. One hundred and thirty-seven Australasian manufacturers were contacted, and 59 questionnaires were returned (response rate: 43%). The respondents represented 454 different manufacturing sites. Manufacturers reported that 23% (95% CI 19-28) of products (n=102/434) that had been through the VITAL ® risk assessment process had no PAL statement on the label. 34% (95% CI 30-38), (n=204/600) of products that had undergone another (non-VITAL ® ) risk assessment process had no PAL statement. In examining the factors that influenced industry's uptake of the VITAL ® process, 25 manufacturers reported on factors that influenced the uptake of the VITAL ® process, 76% (CI 95% 55-91) reported that VITAL ® was an effective tool because it was based on science; 52% (CI 95% 31-72) reported that it was too time-consuming and 36% (CI 95% 18-57) identified a concern with it not being endorsed by the government. Currently, we estimate that at least 30% of products may have been through a risk assessment process and yet bear no PAL statement on the label. Permissive labelling could be incorporated onto these products if they have been assessed to be safe for consumption. © 2017 John Wiley & Sons Ltd.

  16. Sustainable bio kerosene: Process routes and industrial demonstration activities in aviation biofuels

    International Nuclear Information System (INIS)

    Chiaramonti, David; Prussi, Matteo; Buffi, Marco; Tacconi, Daniela

    2014-01-01

    Highlights: • Routes to aviation biofuels are examined, focusing on drop-in biofuels, capable of high blend levels with fossil kerosene. • Industrial demonstration activities are reported. • Used cooking oil is considered as alternative sustainable biomass feedstock for paraffinic fuel production. - Abstract: Alternative fuels are expected to play a major role in EU in the coming years due European Directives on the promotion of renewable energies and reduction of greenhouse gas emissions in transports. However, while in road transports a variety of possible renewable fuels (mainly biofuels, but also electricity) can be considered, in aviation only high quality paraffinic biofuels can be adopted. This means that biomass must be converted through advanced processes into pure hydrocarbon fuels, fully compatible with the existing systems. The aviation sector is responsible for the 2% of the world anthropogenic CO 2 emissions and the 10% of the fuel consumption: airlines’ costs for fuel reach 30% of operating costs. In addition, the aviation traffic is expected to double within 15 years from 2012, while fuel consumption and CO 2 emissions should double in 25 years. Thus, more than 2 billion people and 40 Mt of good/cargo will have to be moved every year. In this context, the EU Flightpath set a target of 2 Mt per year for aviation alternative fuel by 2020 (i.e. 4% of annual fuel consumption). New processes towards bio-hydrocarbons are being developed, demonstrated and soon industrialized. The present work explores the possible routes from biomass feedstock to sustainable paraffinic fuels, either through bio or thermo-chemical processes, as well as discusses those more mature, focusing on industrial demonstration initiatives. In fact, while the number of possible options towards paraffinic biofuel production is very large, and covers both thermochemical and biochemical routes, as well as hybrid one, only two pathways are today ready for testing a significant

  17. Industry 4.0: Reality, Future or just Science Fiction? How to Convince Today's Management to Invest in Tomorrow's Future! Successful Strategies for Industry 4.0 and Manufacturing IT.

    Science.gov (United States)

    Gentner, Stephan

    Manufacturing IT and Industry 4.0 is the Fourth Industrial Revolution with a potential of 12 bn Euros in Germany's chemicals industry. But Switzerland is currently the best prepared of all countries in Europe. Many of the ideas are still very vague. This article discusses how to identify what is already reality, which ideas might become reality in the future and which ideas will stay science fiction. As projects in Manufacturing IT and Industry 4.0 are different from classical technical projects other strategies, for example agile project management, are necessary to secure success.

  18. Directory of the manufacturers and suppliers for the French wind power industry

    International Nuclear Information System (INIS)

    2010-11-01

    With over 5, 660 MW installed in end-2010, France ranks fourth in Europe, behind Germany, Spain and Italy. The wind power industry currently employs almost 11, 000 people in France throughout the value chain. In 2009, the first edition of this directory listed over one hundred companies working in around twenty different areas. Encouraged by these initial positive results, and with the help of ADEME, the French syndicate for renewable energies (SER) asked Capgemini Consulting to undertake a study to identify and raise awareness among French industrials likely to enter into the wind energy market. The French Ministry for Ecology, Energy, Sustainable Development and the Sea, along with the Ministry for the Economy, Finance and Employment, were involved in the work. 400 companies were questioned as part of the study. Over 150 replies testified to the dynamic character of the wind power market in France and overseas, and the opportunities for diversification that it represents for traditional industries like metallurgy, aeronautics, defence and shipyards, etc. The study led to the creation of the initiative Windustry France, which currently groups over 300 companies either active in the French wind power market or set to enter it. Windustry France is a showcase of the industrial know-how that can be used in the wind power industry both onshore and offshore. It includes local set-ups developed around major fields of activity (e.g. car industry, aeronautics, mechanics, etc.) and industrial port zones (Dunkerque, Rouen/Le Havre, Brest, Nantes Saint-Nazaire, Bordeaux, etc.). Several ministries, regional stakeholders and authorities are also involved (local authorities, Regional directorates for industry, research and the environment (DReal) networks and chambers of commerce and industry), all of which contribute to making Windustry France a collective approach to industrial policy. The 2010-2011 edition of the directory of manufacturers and suppliers for the wind power

  19. NESHAP for the Portland Cement Manufacturing Industry: Fact Sheets for Actions Since 2015

    Science.gov (United States)

    EPA is extending its approval for the use of an alternative method to show compliance with hydrogen chloride (HCl) emissions limits in the National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing Industry

  20. PROSPECTS OF APPLICATION OF THE CONCEPTOF QUICK RESPONSE MANUFACTURING AT THE RUSSIAN INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Ch. V. Shipilova

    2016-01-01

    Full Text Available This article is devoted to research of such concept of the organization of production, as Quick Response Manufacturing or Quick-response production, at the center which, time of implementation of the order is put. Today domestic producers are compelled to function in new conditions, competing with a great number of players of the global market, as a result the emphasis on timely implementation of orders and a tendency of reduction of time of production will allow to reach competitive advantages. Fundamental aspects of Quick Response Manufacturing within functioning of the enterprise of branch are considered, and also the essential lack of this concept is revealed.The purpose / objectives. The purpose of article is research of the economic contents of the concept of the organization of production Quick Response Manufacturing and area of its use at the modern industrial enterprises. Article tasks: to investigate economic contents of the concept of Quick Response Manufacturing, to reveal its features and scopes in the modern industry.Methods. A methodical basis of this article are comparative methods of the analysis.Results. The economic contents of the concept of Quick Response Manufacturing are investigated. Four main key aspects which are the cornerstone of this concept are investigated: time force, organizational structure of the enterprise, system dynamics and possibilities of its application in scales of all enterprise. Components of positive work of system dynamics of the industrial enterprise are revealed, the trend of critical process of production is built. Considering that modern conditions demand from the enterprises to react, adapt quickly for the changing conditions, the factor of time plays an important role. Therefore the concept of QRM has rather perspective character, focusing attention on time of implementation of the order, in that communication that this parameter is one of key both for the enterprise, and for increase of its

  1. Scalable manufacturing of biomimetic moldable hydrogels for industrial applications

    Science.gov (United States)

    Yu, Anthony C.; Chen, Haoxuan; Chan, Doreen; Agmon, Gillie; Stapleton, Lyndsay M.; Sevit, Alex M.; Tibbitt, Mark W.; Acosta, Jesse D.; Zhang, Tony; Franzia, Paul W.; Langer, Robert; Appel, Eric A.

    2016-12-01

    Hydrogels are a class of soft material that is exploited in many, often completely disparate, industrial applications, on account of their unique and tunable properties. Advances in soft material design are yielding next-generation moldable hydrogels that address engineering criteria in several industrial settings such as complex viscosity modifiers, hydraulic or injection fluids, and sprayable carriers. Industrial implementation of these viscoelastic materials requires extreme volumes of material, upwards of several hundred million gallons per year. Here, we demonstrate a paradigm for the scalable fabrication of self-assembled moldable hydrogels using rationally engineered, biomimetic polymer-nanoparticle interactions. Cellulose derivatives are linked together by selective adsorption to silica nanoparticles via dynamic and multivalent interactions. We show that the self-assembly process for gel formation is easily scaled in a linear fashion from 0.5 mL to over 15 L without alteration of the mechanical properties of the resultant materials. The facile and scalable preparation of these materials leveraging self-assembly of inexpensive, renewable, and environmentally benign starting materials, coupled with the tunability of their properties, make them amenable to a range of industrial applications. In particular, we demonstrate their utility as injectable materials for pipeline maintenance and product recovery in industrial food manufacturing as well as their use as sprayable carriers for robust application of fire retardants in preventing wildland fires.

  2. Potential Co-Generation of Electrical Energy from Mill Waste: A Case Study of the Malaysian Furniture Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Jegatheswaran Ratnasingam

    2016-04-01

    Full Text Available Furniture manufacturing in Malaysia is an established industry driven primarily by the availability of raw materials and labor. However, the industry suffers from the low-recovery rate of its materials, as it produces a substantial amount of waste during the manufacturing process. Although smaller waste fragments, or off-cuts, are recovered for other purposes, the splinters, shavings, and coarse dust have little economic value and are often discarded. Because wood is a well-established source of bioenergy, this study investigated the potential use of mill waste from the furniture-manufacturing industry for electrical energy generation. Waste from the rubberwood, bamboo, and rattan furniture industries was evaluated for its potential electrical energy generation, and the amount was compared with the electrical energy that was consumed by the furniture industry. The study also compared the emission of greenhouse gases from the combustion of these waste materials against fossil fuels used to generate electricity to assess its potential in terms of the environmental benefits. In conclusion, such mill waste could be utilized as substitute for fossil fuel to generate energy in the furniture industry.

  3. Management accounting techniques and corporate performance of manufacturing industries

    Directory of Open Access Journals (Sweden)

    Ardiansyah Rasyid

    2017-03-01

    Full Text Available This research is to investigate that some factors that affect the new adoption in management accounting techniques on the Indonesia manufacturing industries, specifically in Jakarta, Bogor, Depok, Tangerang and Bekasi regions. The research can give a clearer portrait of how some factors can significantly affect the adoption of management accounting techniques. The research used some questioners which were sent to respondents who work in manufacturing industries as a middle level management. The methods used to distribute the questioners to respondents were by door to door, by e-mail and by media telecommunication (what’s app or close relationship up to hundreds questioners. We obtained 45 respondents but we eliminated one respondent, because they are not suitable to the research requirements. The research model contains the two paths. The first path contains 7 variables that divided by six exogenous variables to affect one endogenous variable and the next path model is from the three variables, that are divided to the one mediating variable and the other one exogenous variables to affect one endogenous variable (like path modelling. The research result shows that high competition does not affect the new accounting adoption but the other five variables; cost system changing, technology changes, organization climate, consumer demand and size significantly affect the new accounting adoption. For the next path, the research finds that the new accounting adoption can significantly affect corporate performance and also corporate performance measurement perception.

  4. A Genetic Algorithm on Inventory Routing Problem

    Directory of Open Access Journals (Sweden)

    Nevin Aydın

    2014-03-01

    Full Text Available Inventory routing problem can be defined as forming the routes to serve to the retailers from the manufacturer, deciding on the quantity of the shipment to the retailers and deciding on the timing of the replenishments. The difference of inventory routing problems from vehicle routing problems is the consideration of the inventory positions of retailers and supplier, and making the decision accordingly. Inventory routing problems are complex in nature and they can be solved either theoretically or using a heuristics method. Metaheuristics is an emerging class of heuristics that can be applied to combinatorial optimization problems. In this paper, we provide the relationship between vendor-managed inventory and inventory routing problem. The proposed genetic for solving vehicle routing problem is described in detail.

  5. Evaluation of Technological Trends and Demands of the Manufacturing Industry to a Center of R&D&I

    Directory of Open Access Journals (Sweden)

    Leone Peter Correia da Silva Andrade

    2015-10-01

    Full Text Available The manufacturing industry is fairly representative in the Brazilian economy. The research activities in technology, development and innovation promoted by technology centers are of great importance to boost the competitiveness of this segment. In this context, this work aims presenting the development of the strategic planning for a Center of R&D&I (Research & Development & Innovation, looking 20 years ahead, on a macro level, creating a master plan which summarizes the future focus areas of competence for technology research, development and innovation, coping with manufacturing trends, using a participative workshop approach. Thus, it is expected that this center offer integrated technological solutions with high added value that promote the development and competitiveness of the manufacturing industry, in the prospects for medium and long term. In order to achieve the project objectives taking the principle of strategic planning was followed. On the one hand, focus was placed on the internal perspective analyzing the current status of the Center. On the other hand, the environment of the Center (external perspective was analyzed. Matching the analysis results regarding both perspectives future competence areas were derived, according to global technological trends as well as national and local industrial demand. Thus, the competencies required to be developed by a technology center to meet the manufacturing industry over the next twenty years would be derived.

  6. Behind the development of technology: The transition of innovation modes in China’s wind turbine manufacturing industry

    International Nuclear Information System (INIS)

    Ru Peng; Zhi Qiang; Zhang Fang; Zhong Xiaotian; Li Jianqiang; Su Jun

    2012-01-01

    The market scale of China’s wind turbine manufacturing industry has grown immensely. Despite China still having a limited capacity in terms of technology innovation, the institutional support has promoted the technology capability development of the wind turbine manufacturing industry. This paper explores the driving forces underlying this development by reviewing the transition of the innovation modes and the dynamic interactions among the technology capability, innovation modes, market formation, and wind energy policy. The innovation mode in China began with imitative innovation, then transitioned to cooperative innovation, and has more recently set its sights on attaining truly indigenous innovation. Public policy serves as a key driving force for the evolution of innovation modes, as well as the development of the market. The policy focus has evolved in the following sequence: 1. building the foundation for technological innovation; 2. encouraging technology transfer; 3. enhancing local R and D and manufacturing capabilities; 4. enlarging the domestic market; and 5. cultivating an open environment for global competition and sustainable market development in China. - Highlights: ► New data were provided for China’s wind turbine manufacturing industry. ► The transition of innovation modes in the industry is reviewed. ► The interaction among the technology, market, policy, and innovation mode is explored. ► Public policies are the key driving forces for the transition.

  7. Product manufacturing, quality, and reliability initiatives to maintain a competitive advantage and meet customer expectations in the semiconductor industry

    Science.gov (United States)

    Capps, Gregory

    Semiconductor products are manufactured and consumed across the world. The semiconductor industry is constantly striving to manufacture products with greater performance, improved efficiency, less energy consumption, smaller feature sizes, thinner gate oxides, and faster speeds. Customers have pushed towards zero defects and require a more reliable, higher quality product than ever before. Manufacturers are required to improve yields, reduce operating costs, and increase revenue to maintain a competitive advantage. Opportunities exist for integrated circuit (IC) customers and manufacturers to work together and independently to reduce costs, eliminate waste, reduce defects, reduce warranty returns, and improve quality. This project focuses on electrical over-stress (EOS) and re-test okay (RTOK), two top failure return mechanisms, which both make great defect reduction opportunities in customer-manufacturer relationship. Proactive continuous improvement initiatives and methodologies are addressed with emphasis on product life cycle, manufacturing processes, test, statistical process control (SPC), industry best practices, customer education, and customer-manufacturer interaction.

  8. EUV mask manufacturing readiness in the merchant mask industry

    Science.gov (United States)

    Green, Michael; Choi, Yohan; Ham, Young; Kamberian, Henry; Progler, Chris; Tseng, Shih-En; Chiou, Tsann-Bim; Miyazaki, Junji; Lammers, Ad; Chen, Alek

    2017-10-01

    As nodes progress into the 7nm and below regime, extreme ultraviolet lithography (EUVL) becomes critical for all industry participants interested in remaining at the leading edge. One key cost driver for EUV in the supply chain is the reflective EUV mask. As of today, the relatively few end users of EUV consist primarily of integrated device manufactures (IDMs) and foundries that have internal (captive) mask manufacturing capability. At the same time, strong and early participation in EUV by the merchant mask industry should bring value to these chip makers, aiding the wide-scale adoption of EUV in the future. For this, merchants need access to high quality, representative test vehicles to develop and validate their own processes. This business circumstance provides the motivation for merchants to form Joint Development Partnerships (JDPs) with IDMs, foundries, Original Equipment Manufacturers (OEMs) and other members of the EUV supplier ecosystem that leverage complementary strengths. In this paper, we will show how, through a collaborative supplier JDP model between a merchant and OEM, a novel, test chip driven strategy is applied to guide and validate mask level process development. We demonstrate how an EUV test vehicle (TV) is generated for mask process characterization in advance of receiving chip maker-specific designs. We utilize the TV to carry out mask process "stress testing" to define process boundary conditions which can be used to create Mask Rule Check (MRC) rules as well as serve as baseline conditions for future process improvement. We utilize Advanced Mask Characterization (AMC) techniques to understand process capability on designs of varying complexity that include EUV OPC models with and without sub-resolution assist features (SRAFs). Through these collaborations, we demonstrate ways to develop EUV processes and reduce implementation risks for eventual mass production. By reducing these risks, we hope to expand access to EUV mask capability for

  9. Strategic Roles of Manufacturing

    DEFF Research Database (Denmark)

    Yang, Cheng

    with the trend of globalisation, how do industrial companies develop their global manufacturing networks? These two questions are actually interlinked. On the one hand, facing increasing offshoring and outsourcing of production activities, industrial companies have to understand how to develop their global...... manufacturing networks. On the other hand, ongoing globalisation also brings tremendous impacts to post-industrial economies (e.g. Denmark). A dilemma therefore arises, i.e. whether it is still necessary to keep manufacturing in these post-industrial economies; if yes, what kinds of roles manufacturing should...

  10. DESIGN AND MANUFACTURING OF MODULAR PARQUET FLOORING IN INDUSTRIAL SYSTEM

    Directory of Open Access Journals (Sweden)

    Ivan CISMARU

    2014-09-01

    Full Text Available The paper submits constructive options and methods to design and manufacture modular parquet flooring, as well as fastening methods in constructions. Likewise, it presents the branches of civil engineering where modular parquet flooring may be turned to profit – industrial buildings, company premises or residential premises. The turn towards the achievement of private constructions, such as individual houses, led to losing control of the modular system applied in defining the inner sizes of the constructions and implicitly to the apparition of dimensional incompatibilities between the parquet flooring and the built spaces. The paper sets out (to solve by an individualized design procedure to achieve modular parquet flooring in industrial system, in correspondence with the sizes of the inner spaces afferent to the constructions.

  11. The optimal parameter design for a welding unit of manufacturing industry by Taguchi method and computer simulation

    Energy Technology Data Exchange (ETDEWEB)

    Zahraee, S.M.; Chegeni, A.; Toghtamish, A.

    2016-07-01

    Manufacturing systems include a complicated combination of resources, such as materials, labors, and machines. Hence, when the manufacturing systems are faced with a problem related to the availability of resources it is difficult to identify the root of the problem accurately and effectively. Managers and engineers in companies are trying to achieve a robust production line based on the maximum productivity. The main goal of this paper is to design a robust production line, taking productivity into account in the selected manufacturing industry. This paper presents the application of Taguchi method along with computer simulation for finding an optimum factor setting for three controllable factors, which are a number of welding machines, hydraulic machines, and cutting machines by analyzing the effect of noise factors in a selected manufacturing industry. Based on the final results, the optimal design parameter of welding unit of in the selected manufacturing industry will be obtained when factor A is located at level 2 and B and C are located at level 1. Therefore, maximum productive desirability is achieved when the number of welding machines, hydraulic machines, and cutting machines is equal to 17, 2, and 1, respectively. This paper has a significant role in designing a robust production line by considering the lowest cost and timely manner based on the Taguchi method. (Author)

  12. The optimal parameter design for a welding unit of manufacturing industry by Taguchi method and computer simulation

    Directory of Open Access Journals (Sweden)

    Seyed Mojib Zahraee

    2016-05-01

    Full Text Available Purpose: Manufacturing systems include a complicated combination of resources, such as materials, labors, and machines. Hence, when the manufacturing systems are faced with a problem related to the availability of resources it is difficult to identify the root of the problem accurately and effectively. Managers and engineers in companies are trying to achieve a robust production line based on the maximum productivity. The main goal of this paper is to design a robust production line, taking productivity into account in the selected manufacturing industry. Design/methodology/approach: This paper presents the application of Taguchi method along with computer simulation for finding an optimum factor setting for three controllable factors, which are a number of welding machines, hydraulic machines, and cutting machines by analyzing the effect of noise factors in a selected manufacturing industry. Findings and Originality/value: Based on the final results, the optimal design parameter of welding unit of in the selected manufacturing industry will be obtained when factor A is located at level 2 and B and C are located at level 1. Therefore, maximum productive desirability is achieved when the number of welding machines, hydraulic machines, and cutting machines is equal to 17, 2, and 1, respectively. This paper has a significant role in designing a robust production line by considering the lowest cost and timely manner based on the Taguchi method.

  13. Environmental and risk screening for prioritizing pollution prevention opportunities in the U.S. printed wiring board manufacturing industry.

    Science.gov (United States)

    Lam, Carl W; Lim, Seong-Rin; Schoenung, Julie M

    2011-05-15

    Modern manufacturing of printed wiring boards (PWBs) involves extensive use of various hazardous chemicals in different manufacturing steps such as board preparation, circuit design transfer, etching and plating processes. Two complementary environmental screening methods developed by the U.S. EPA, namely: (i) the Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI) and (ii) Risk-Screening Environmental Indicators (RSEI), are used to quantify geographic and chemical environmental impacts in the U.S. PWB manufacturing industry based on Toxics Release Inventory (TRI) data. Although the release weight percentages of industrial chemicals such as methanol, glycol ethers and dimethylformamide comprise the larger fraction of reported air and water emissions, results indicate that lead, copper and their compounds' releases correspond to the highest environmental impact from toxicity potentials and risk-screening scores. Combining these results with further knowledge of PWB manufacturing, select alternative chemical processes and materials for pollution prevention are discussed. Examples of effective pollution prevention options in the PWB industry include spent etchant recovery technologies, and process and material substitutions. In addition, geographic assessment of environmental burden highlights states where promotion of pollution prevention strategies and emissions regulations can have the greatest effect to curb the PWB industry's toxic release impacts. Copyright © 2011 Elsevier B.V. All rights reserved.

  14. Application of Lean Manufacturing Tools in the Food and Beverage Industries

    Directory of Open Access Journals (Sweden)

    Rui Borges Lopes

    2015-10-01

    Full Text Available Recent years have shown an increasing use of lean manufacturing (LM principles and tools in several industrial sectors. Already a well-established management philosophy, it has shown numerous successful applications even outside production environments. This work presents the application of some LM tools, and the corresponding shift in philosophy, in two Portuguese companies of the food and beverage industries. Main implementation issues are presented and discussed; followed by the results obtained from the application of LM tools in the production system of these companies. Significant gains are obtained in both companies and, more importantly, it instills a continuous improvement culture and increases production flexibility while reducing lead times.

  15. Frontline Leaders: The Entry Point for Leadership Development in the Manufacturing Industry

    Science.gov (United States)

    Liu, Lucy; McMurray, Adela J.

    2004-01-01

    This multi-method case study examined the roles, functions, capabilities, job satisfaction, strengths, weaknesses and skill gaps of frontline team leaders working on the shopfloor in the Australian automobile industry. The study was conducted in a large automobile manufacturing company employing 4,500 employees and rated as one of the top 22…

  16. Nanoparticle usage and protection measures in the manufacturing industry--a representative survey.

    Science.gov (United States)

    Schmid, Kaspar; Danuser, Brigitta; Riediker, Michael

    2010-04-01

    Addressing the risks of nanoparticles requires knowledge about release into the environment and occupational exposure. However, such information currently is not systematically collected; therefore, this risk assessment lacks quantitative data. The goal was to evaluate the current level of nanoparticle usage in Swiss industry as well as health, safety, and environmental measures, and the number of potentially exposed workers. A representative, stratified mail survey was conducted among 1626 clients of the Swiss National Accident Insurance Fund (SUVA), which insures 80,000 manufacturing firms, representing 84% of all Swiss manufacturing companies (947 companies answered the survey for a 58.3% response rate). The extrapolation to all Swiss manufacturing companies results in 1309 workers (95% confidence interval [CI]: 1073 to 1545) potentially exposed to nanoparticles in 586 companies (95% CI: 145 to 1027). This corresponds to 0.08% of workers (95% CI: 0.06% to 0.09%) and to 0.6% of companies (95% CI: 0.2% to 1.1%). The industrial chemistry sector showed the highest percentage of companies using nanoparticles (21.2%). Other important sectors also reported nanoparticles. Personal protection equipment was the predominant protection strategy. Only a few applied specific environmental protection measures. This is the first nationwide representative study on nanoparticle use in the manufacturing sector. The information gained can be used for quantitative risk assessment. It can also help policymakers design strategies to support companies developing a safer use of nanomaterial. Noting the current low use of nanoparticles, there is still time to proactively introduce protective methods. If the predicted "nano-revolution" comes true, now is the time to take action.

  17. Past and Present of the Chinese and Korean Trainees and Survival of a Small Manufacturing Industry

    Science.gov (United States)

    Nishihata, Mikio

    In 1973, the author established the Nippon Bell Parts Co., Ltd. in Funabashi-city under his estimation of the advances in communication, information, semiconductor and automotive industries, then he has focused on R&D and developed the manufacturing of precise parts. During the past 30 years, he has himself experienced the importance of the mutual exchange between Japan and China and Korea, for keeping the human capability as well as for the management and the technical development to avoid a bankruptcy. The author is intentionally acting for the education of craftsmen in small and medium-sized manufacturing industries.

  18. Unemployment and Salary Formation in the Mexican Manufacturing Industry: A Dynamic Panel Analysis

    OpenAIRE

    Sara G. Castellanos

    2010-01-01

    In this article we study the relationship between wages, unemployment and labor productivity in Mexico’s manufacturing sector. We use the data of Monthly Industrial Survey, produced by the National Institute of Statistics (INEGI), to estimate a model with the generalized method of moments for dynamic panel data of Arellano and Bond (1991). This method exploits the cross time and cross section variability of the industrial sector data, and yields consistent and efficient estimators. Results su...

  19. Advantage Management Strategy in Competition via Technological Race Perspective: Empirical Evidence from the Taiwanese Manufacturing Industry

    OpenAIRE

    Tsu-Yi Hung; Yu-Ju Hsiao; Shih-Wei Wu

    2014-01-01

    This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs) tend to adopt the “catch-up” strategy to keep up with their competitors in order to remain in the technological race. The resu...

  20. A case study on Simulation and Design optimization to improve Productivity in cooling tower manufacturing industry

    Science.gov (United States)

    Pranav Nithin, R.; Gopikrishnan, S.; Sumesh, A.

    2018-02-01

    Cooling towers are the heat transfer devices commonly found in industries which are used to extract the high temperature from the coolants and make it reusable in various plants. Basically, the cooling towers has Fills made of PVC sheets stacked together to increase the surface area exposure of the cooling liquid flowing through it. This paper focuses on the study in such a manufacturing plant where fills are being manufactured. The productivity using the current manufacturing method was only 6 to 8 fills per day, where the ideal capacity was of 14 fills per day. In this plant manual labor was employed in the manufacturing process. A change in the process modification designed and implemented will help the industry to increase the productivity to 14. In this paper, initially the simulation study was done using ARENA the simulation package and later the new design was done using CAD Package and validated using Ansys Mechanical APDL. It’s found that, by the implementation of the safe design the productivity can be increased to 196 Units.

  1. Tribology in Manufacturing Technology

    CERN Document Server

    2013-01-01

    The present book aims to provide research advances on tribology in manufacturing technology for modern industry. This book can be used as a research book for final undergraduate engineering course (for example, mechanical, manufacturing, materials, etc) or as a subject on manufacturing at the postgraduate level. Also, this book can serve as a useful reference for academics, manufacturing and tribology researchers, mechanical, mechanical, manufacturing and materials engineers, professionals in related industries with manufacturing and tribology.

  2. Local outcomes of globalization: manufacturing decline and labor response in the Philippine garment and shoe industries

    NARCIS (Netherlands)

    Beerepoot, N.

    2008-01-01

    In the past few decades, globalisation has led to major international shifts in labour intensive manufacturing generating ‘winners’ and ‘losers’ among countries, industries and workers. This paper uses case studies of the shoe industry in Marikina City and the garments sector in Metro Manila in

  3. A NEW Curriclum for Manufacturing & Industrial Engineering and Engineering Management for Bs and Ms Degrees

    OpenAIRE

    SARI, Zaki

    2012-01-01

    This paper deals with the design and implementation of a new curriclum for manufacturing & industrial engineering and engineering management for bachelor and master degrees at tlemcen university, algeria

  4. An Empirical study on the competitiveness and innovation in four sectors of the Turkish manufacturing industry

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz; Çetindamar, Dilek; Cetindamar, Dilek; Yeğenoğlu, Hande; Yegenoglu, Hande; Bulut, Çağrı; Bulut, Cagri

    2007-01-01

    In this paper, we report on some of the results of the Innovations in Manufacturing Industries in Turkey Study (IMITS). This study is an empirical investigation into the innovation performance and competitive strategies of manufacturing firms in Turkey. The data was gathered in nine different cities in Turkey during the period August 2004 – January 2005. The survey was conducted through face-to-face interviews due to the complex nature of the survey and was implemented in 135 manufacturing fi...

  5. Validation of a pre-existing safety climate scale for the Turkish furniture manufacturing industry.

    Science.gov (United States)

    Akyuz, Kadri Cemil; Yildirim, Ibrahim; Gungor, Celal

    2018-03-22

    Understanding the safety climate level is essential to implement a proactive safety program. The objective of this study is to explore the possibility of having a safety climate scale for the Turkish furniture manufacturing industry since there has not been any scale available. The questionnaire recruited 783 subjects. Confirmatory factor analysis (CFA) tested a pre-existing safety scale's fit to the industry. The CFA indicated that the structures of the model present a non-satisfactory fit with the data (χ 2  = 2033.4, df = 314, p ≤ 0.001; root mean square error of approximation = 0.08, normed fit index = 0.65, Tucker-Lewis index = 0.65, comparative fit index = 0.69, parsimony goodness-of-fit index = 0.68). The results suggest that a new scale should be developed and validated to measure the safety climate level in the Turkish furniture manufacturing industry. Due to the hierarchical structure of organizations, future studies should consider a multilevel approach in their exploratory factor analyses while developing a new scale.

  6. Women workers in male dominated industrial manufacturing organisations: Contrasting workplace case studies from Australia

    OpenAIRE

    Burgess, John; Henderson, Lindy; Strachan, Glenda

    2005-01-01

    This study compared women's roles, expectations and experiences in two comparable, male dominated industrial manufacturing companies in Australia. Both organisations are subject to legislated equal opportunity program and reporting requirements. The research was conducted to examinee the differences between what is submitted in their EEO reports and the experience of women workers in the organisations. Good jobs and poor jobs existed in the same legislative and industrial framework and in the...

  7. 77 FR 14022 - Guidance for Industry on Chemistry, Manufacturing, and Controls Information-Fermentation-Derived...

    Science.gov (United States)

    2012-03-08

    ...] Guidance for Industry on Chemistry, Manufacturing, and Controls Information--Fermentation-Derived... (CMC) Information-- Fermentation-Derived Intermediates, Drug Substances, and Related Drug Products for... to submit to support the CMC information for fermentation-derived intermediates, drug substances, and...

  8. Safety practices in Jordanian manufacturing enterprises within industrial estates.

    Science.gov (United States)

    Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

    2013-01-01

    This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

  9. Best Manufacturing Practices: Report of Survey Conducted at Headquarters, U.S. Army Industrial Operations Command, ROck Island, IL

    National Research Council Canada - National Science Library

    Renner, Ernie

    1997-01-01

    This report was produced by the Best Manufacturing Practices (BMP) program, a unique industry and government cooperative technology transfer effort that improves the competitiveness of America's industrial base both here and abroad...

  10. 76 FR 13629 - Draft Guidance for Industry on Chemistry, Manufacturing, and Controls Information-Fermentation...

    Science.gov (United States)

    2011-03-14

    ...] Draft Guidance for Industry on Chemistry, Manufacturing, and Controls Information--Fermentation-Derived... Controls (CMC) Information-- Fermentation-Derived Intermediates, Drug Substances, and Related Drug Products... documentation to submit to support the CMC information for fermentation-derived intermediates, drug substances...

  11. Bioelectrochemical Integration of Waste Heat Recovery, Waste-to- Energy Conversion, and Waste-to-Chemical Conversion with Industrial Gas and Chemical Manufacturing Processes

    Energy Technology Data Exchange (ETDEWEB)

    Mac Dougall, James [Air Products and Chemicals, Inc., Allentown, PA (United States)

    2016-02-05

    Many U.S. manufacturing facilities generate unrecovered, low-grade waste heat, and also generate or are located near organic-content waste effluents. Bioelectrochemical systems, such as microbial fuel cells and microbial electrolysis cells, provide a means to convert organic-content effluents into electric power and useful chemical products. A novel biochemical electrical system for industrial manufacturing processes uniquely integrates both waste heat recovery and waste effluent conversion, thereby significantly reducing manufacturing energy requirements. This project will enable the further development of this technology so that it can be applied across a wide variety of US manufacturing segments, including the chemical, food, pharmaceutical, refinery, and pulp and paper industries. It is conservatively estimated that adoption of this technology could provide nearly 40 TBtu/yr of energy, or more than 1% of the U.S. total industrial electricity use, while reducing CO2 emissions by more than 6 million tons per year. Commercialization of this technology will make a significant contribution to DOE’s Industrial Technology Program goals for doubling energy efficiency and providing a more robust and competitive domestic manufacturing base.

  12. Extended FMEA for Sustainable Manufacturing: An Empirical Study in the Non-Woven Fabrics Industry

    Directory of Open Access Journals (Sweden)

    Thanh-Lam Nguyen

    2016-09-01

    Full Text Available Failure modes and effects analysis ( F M E A substantially facilitates the efforts of industrial manufacturers in prioritizing failures that require corrective actions to continuously improve product quality. However, the conventional approach fails to provide satisfactory explanation of the aggregate effects of a failure from different perspectives such as technical severity, economic severity, and production capacity in some practical applications. To fulfill the existing gap in the F M E A literature, this paper proposes an extension by considering associated quality cost and the capability of failure detection system as additional determinants to signify the priority level for each failure mode. The quality cost and capacity are considered as key factors for sustainable survival and development of an industrial manufacturer in the fierce competition market these days. The performance of the extended scheme was tested in an empirical case at a non-woven fabrics manufacturer. Analytical results indicate that the proposed approach outperforms the traditional one and remarkably reduces the percentage of defective fabrics from about 2.41% before the trial period to 1.13%,thus significantly reducing wastes and increasing operation efficiency, thereby providing valuable advantages to improve organizational competition power for their sustainable growth.

  13. Substitution or segregation: explaining the gender composition in Dutch manufacturing industry 1899-1998

    NARCIS (Netherlands)

    van Klaveren, M.; Tijdens, K.G.

    2001-01-01

    This paper focuses on the role of substitution or segregation in the demand for female labour. Based on an extensive overview of detailed studies, fluctuations in the gender composition of the labour force in four major sectors of Dutch manufacturing industry have been examined over the past hundred

  14. Instructional Materials in Manufacturing for Junior High School Industrial Arts. Final Report and Parts I-IV.

    Science.gov (United States)

    Ohio State Univ., Columbus.

    This Title XI Institute was designed and conducted to introduce the participants to inquiry and invention taking place in industrial arts curriculum across the United States. The institute participated in the inquiry stage through advanced study of manufacturing technology and industrial arts curriculum, and in the invention stage through the…

  15. National Emission Standards for Hazardous Air Pollutants (NESHAP) for the Portland Cement Manufacturing Industry Subpart LLL Rule Guidance

    Science.gov (United States)

    This Spring 2016 document is intended for the use of EPA staff, State and Local regulatory agencies and their staff, and industry plant managers for the NESHAP for the Portland Cement Manufacturing Industry.

  16. DETERMINING THE NEED FOR ZERO SERIES EXECUTION IN MANUFACTURING PROCESSES IN THE TEXTILE GARMENT INDUSTRY

    Directory of Open Access Journals (Sweden)

    OANA Ioan Pave

    2017-05-01

    Full Text Available Because the industrial production requires the application of some transformation procedures on the material resources, so that a clothing product comes out with optimal use value in terms of maximum economic efficiency, one of the main influencial factors is the quality of the products. To make manufacturing processes more efficient, it is necessary to carry out the zero series in order to ensure the quality of the technological processes, as well as to prevent some design deficiencies. Among the main operations undertaken to ensure the quality of the zero series, we mention: creating the conditions for launch, tracking and finalizing the accompanying production documents under similar series production conditions; zero-series producers are usually the same workers who make up the series production line; equipping with the appropriate equipment and providing with necessary devices in order to create the technical conditions for the execution of the zero series; providing technical assistance in relation to manufacturing and control documentation for eliminating the design deficiencies. This paper presents the architecture of the zero series execution in manufacturing processes in the textile garment industry. The information obtained from the zero-series analysis is directed to the technical support, for possible corrections of the patterns according to which the products were manufactured.

  17. Advantage Management Strategy in Competition via Technological Race Perspective: Empirical Evidence from the Taiwanese Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Tsu-Yi Hung

    2014-01-01

    Full Text Available This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs tend to adopt the “catch-up” strategy to keep up with their competitors in order to remain in the technological race. The result indicates that, under financial constraints, Taiwanese manufacturing firms attempt to invest in R&D to catch up with their rivals or to avoid being eliminated from the race.

  18. Advantage management strategy in competition via technological race perspective: empirical evidence from the Taiwanese manufacturing industry.

    Science.gov (United States)

    Hung, Tsu-Yi; Hsiao, Yu-Ju; Wu, Shih-Wei

    2014-01-01

    This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs) tend to adopt the "catch-up" strategy to keep up with their competitors in order to remain in the technological race. The result indicates that, under financial constraints, Taiwanese manufacturing firms attempt to invest in R&D to catch up with their rivals or to avoid being eliminated from the race.

  19. Advantage Management Strategy in Competition via Technological Race Perspective: Empirical Evidence from the Taiwanese Manufacturing Industry

    Science.gov (United States)

    Hung, Tsu-Yi; Hsiao, Yu-Ju; Wu, Shih-Wei

    2014-01-01

    This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs) tend to adopt the “catch-up” strategy to keep up with their competitors in order to remain in the technological race. The result indicates that, under financial constraints, Taiwanese manufacturing firms attempt to invest in R&D to catch up with their rivals or to avoid being eliminated from the race. PMID:25295307

  20. The Competitive status of the U.S. civil aviation manufacturing industry: a study of the influences of technology in determining international industrial competitive advantage

    National Research Council Canada - National Science Library

    Seitz, Frederick; Steele, Lowell W

    1985-01-01

    ... A Study of the Influences of Technology in Determining International Industrial Competitive Advantage Prepared by the U.S. Civil Aviation Manufacturing Industry Panel, Committee on Technology and International Economic and Trade Issues of the Office of the Foreign Secretary, National Academy of Engineering and the Commission on Engineering and Techni...

  1. US manufacturing imports from China and employment in the Mexican manufacturing sector

    Directory of Open Access Journals (Sweden)

    Jorge Eduardo Mendoza Cota

    2016-09-01

    Full Text Available Since 2001 the manufacturing sector of Mexico has experienced a reduced growth rate. This study estimates the impact of U.S. and Chinese industrial activity on the demand for labor in the manufacturing sector of Mexico. With data on industrial activity, Chinese exports, wages and the peso-dollar exchange rate, a time series cointegration model is developed. The results show that exports from China to the USA and manufacturing wages have affected labor demand negatively, while factors such as the U.S. industrial production and the exchange rate tend to encourage manufacturing activity.

  2. Readiness Assessment Towards Smart Manufacturing System for Tuna Processing Industry in Indonesia

    Science.gov (United States)

    Anggrahini, D.; Kurniati, N.; Karningsih, P. D.; Parenreng, S. M.; Syahroni, N.

    2018-04-01

    Marine product processing is one of the top priority clusters in the national development. Tuna, as a kind of deep ocean fishes, has the highest number of production that significantly increased throughout the years. Indonesia government encourages tuna processing industry, which are mostly dominated by small to medium enterprises, to grow continuously. Nowadays, manufacturers are facing substantial challenges in adopting modern system and technology that will lead a significant improvement through the internet of things (IoT). A smart factory transform integrated manufacturing process, in a high speed processing to respond customer needs. It has some positive impacts, such as increasing productivity, reducing set up time, shortening marketing and other support activities, hence the process is being more flexible and efficient. To implement smart manufacturing system, factories should know the readiness at any level of them, technology capability and strategy appropriateness. This exploratory study aims to identify the criterias, and develop an assessment tools to measure the level towards smart factory.

  3. A COUNTY-LEVEL MODEL OF MANUFACTURING PLANT RECRUITMENT WITH IMPROVED INDUSTRIAL SITE QUALITY MEASUREMENT

    OpenAIRE

    Kriesel, Warren; McNamara, Kevin T.

    1991-01-01

    Empirical analysis of manufacturing plant location requires the use of a single industrial site quality measure. Under hedonic price theory, the price of industrial sites can be explained by their quality characteristics. The estimated site price is included with ten other location factors in an ordered, categorical logit model of plant attraction to Georgia counties. The results inform public decision-makers of the relative impact of site location factors and how changes in location factors ...

  4. Micro-manufacturing: design and manufacturing of micro-products

    National Research Council Canada - National Science Library

    Koç, Muammer; Özel, Tuğrul

    2011-01-01

    .... After addressing the fundamentals and non-metallic-based micro-manufacturing processes in the semiconductor industry, it goes on to address specific metallic-based micro-manufacturing processes...

  5. Factors Contribute to Safety Culture in the Manufacturing Industry in Malaysia

    OpenAIRE

    Ong Choon Hee

    2014-01-01

    The purpose of this paper is to explain the role of safety culture in the manufacturing industry in Malaysia and identify factors contribute to safety culture. It is suggested in this study that leadership support, management commitment and safety management system are important factors that contribute to safety culture. This study also provides theoretical implications to guide future research and offers practical implications to the managers in the development of safety culture. Given that ...

  6. Educational program for industrial engineers : nurturing new perspectives on manufacturing technology

    OpenAIRE

    Ishii, Kazuyoshi; Ikeda, Hiroshi; Tsuchiya, Akinori; Shikida, Asami; Abe, Takehiko

    2005-01-01

    In this paper, we propose the basic concept and result of an educational program developed for industrial engineers and managers in leadership roles who wish to create new values in manufacturing technology. The basic concept combines an intelligent knowledge-based approach with the kaizen activity program in a framework of new value creation and comparative advantage models based on the ABC-G network (Academia, Business, Consultants, and Governmental officers). The educational program is bas...

  7. The history of the peat manufacturing industry in The Netherlands : peat moss litter and active carbon

    NARCIS (Netherlands)

    Karel, Erwin; Gerding, Michiel; De Vries, Gerben

    This article describes the development of three major forms of peat processing by the manufacturing industry in The Netherlands since the last quarter of the 19th century. At a time when peat as a fuel was gradually being replaced by coal, the first form was the peat moss litter industry. Peat moss

  8. Sustaining Competitiveness: Moving Towards Upstream Manufacturing in Specialized-Market-Based Clusters in the Chinese Toy Industry

    Directory of Open Access Journals (Sweden)

    Huasheng Zhu

    2016-02-01

    Full Text Available Western industrial cluster literature pays little attention to specialized markets (SMs and the geographical agglomeration of distributors or sale agencies (SAs. This paper takes Linyin, Shandong, a famous commodity city in Northeastern China, as an example, to discuss the determinants that make SAs in SMs of the toy industry move towards upstream manufacturing. A structured questionnaire survey and subsequent interviews were carried out during 2011 and 2012 to collect data, and a Binary Logistic Regression Model was used to process the data. This paper looks from the perspective of global production networks theory, establishes an analytical framework that combines individual motivations of intra-firm coordination, local inter-firm relationships and dynamic cross-regional level relationships. The findings indicate that the expansion of SAs towards manufacturing allows them to sustain competitiveness under changing circumstances. The local inter-firm relationships within SM-based clusters not only makes it easy to obtain material and human resources with lower manufacturing costs, but also facilitates the access to production knowledge and technologies for an expansion of production scale. Cross-regional relationships with suppliers provide an informal channel for SAs to obtain skills, which is fundamental for an expansion into manufacturing. In addition, it is a preference for strengthening competitiveness rather than the simple pursuit of economic profit that encourages SAs to invest in manufacturing.

  9. Productivity improvement through industrial engineering in the semiconductor industry

    Science.gov (United States)

    Meyersdorf, Doron

    1996-09-01

    Industrial Engineering is fairly new to the semiconductor industry, though the awareness to its importance has increased in recent years. The US semiconductor industry in particular has come to the realization that in order to remain competitive in the global market it must take the lead not only in product development but also in manufacturing. Industrial engineering techniques offer one ofthe most effective strategies for achieving manufacturing excellence. Industrial engineers play an important role in the success of the manufacturing facility. This paper defines the Industrial engineers role in the IC facility, set the visions of excellence in semiconductor manufacturing and highlights 10 roadblocks on the journey towards manufacturing excellence.

  10. CO_2 emissions reduction of Chinese light manufacturing industries: A novel RAM-based global Malmquist–Luenberger productivity index

    International Nuclear Information System (INIS)

    Emrouznejad, Ali; Yang, Guo-liang

    2016-01-01

    Climate change has become one of the most challenging issues facing the world. Chinese government has realized the importance of energy conservation and prevention of the climate changes for sustainable development of China's economy and set targets for CO_2 emissions reduction in China. In China industry contributes 84.2% of the total CO_2 emissions, especially manufacturing industries. Data envelopment analysis (DEA) and Malmquist productivity (MP) index are the widely used mathematical techniques to address the relative efficiency and productivity of a group of homogenous decision making units, e.g. industries or countries. However, in many real applications, especially those related to energy efficiency, there are often undesirable outputs, e.g. the pollutions, waste and CO_2 emissions, which are produced inevitably with desirable outputs in the production. This paper introduces a novel Malmquist–Luenberger productivity (MLP) index based on directional distance function (DDF) to address the issue of productivity evolution of DMUs in the presence of undesirable outputs. The new RAM (Range-adjusted measure)-based global MLP index has been applied to evaluate CO_2 emissions reduction in Chinese light manufacturing industries. Recommendations for policy makers have been discussed. - Highlights: •CO_2 emissions reduction in Chinese light manufacturing industries are measured. •A novel RAM based Malmquist–Luenberger productivity index has been developed. •Recommendation to policy makers for reducing CO_2 reduction in China are given.

  11. Recent rapid increases in the demand for city gas in manufacturing industries and future developments

    International Nuclear Information System (INIS)

    Kusano, Shigero

    1992-01-01

    City gas companies in Japan are experiencing an expansion in demand for gas in all manufacturing industries. The reason for this is, first and foremost, external, in that the first and second oil crises and the recent Gulf War have placed the oil market in a state of flux. That is to say, supply and demand in the oil products market is unstable while the stability of city gas, which is the main raw material for LNG, is being highly appraised. Another external reason is related to a subject much in the news recently the world over - the environment. City gas is highly regarded for its minimum environmental impact. Domestic reasons for the expansion include the fact that with the increase in use of city gas in manufacturing industries, the end user is beginning to recognize the various special qualities that city gas possesses. The expansion is also due in part to the unrelenting efforts in sales by the gas producers themselves. This report focuses on the expansion in demand in city gas over the past ten years from the point of view of Tokyo Gas as a producer that has been party to the increased sales of city gas in manufacturing industries for over 10 years giving views on the reasons for the increase. Graphic reports of the actual situation of the industry at meetings such as these are rare and therefore although this is slightly different from the main theme, I would like to proceed with the debate in the hope that this will be beneficial in the expansion of future gas demand in countries all over the world

  12. Thermal energy consumption and carbon dioxide emissions in ceramic tile manufacture - Analysis of the Spanish and Brazilian industries

    International Nuclear Information System (INIS)

    Monfort, E.; Mezquita, A.; Vaquer, E.; Mallol, G.; Alves, H. J.; Boschi, A. O.

    2012-01-01

    Spain and Brazil are two of the world's biggest ceramic tile producers. The tile manufacturing process consumes a great quantity of thermal energy that, in these two countries, is mainly obtained from natural gas combustion, which entails CO 2 emission, a greenhouse gas. This study presents a comparative analysis of the thermal energy consumption and CO 2 emissions in the ceramic tile manufacturing process in Spain and Brazil, in terms of the different production technologies and different products made. The energy consumption and CO 2 emissions in ceramic tile manufacture by the wet process are very similar in both countries. In the dry process used in Brazil, less thermal energy is consumed and less CO 2 is emitted than in the wet process, but it is a process that is only used in manufacturing one particular type of product, which exhibits certain technical limitations. While in Spain the use of cogeneration systems in spray-dryers improves significantly the global energy efficiency. The average energy consumption in the different process stages, in both countries, lies within the range indicated in the Reference Document on Best Available Techniques in the Ceramic Manufacturing Industry (BREF of the Ceramic Manufacturing Industry) of the European Union. (Author) 14 refs.

  13. The Fuzzy u-Chart for Sustainable Manufacturing in the Vietnam Textile Dyeing Industry

    Directory of Open Access Journals (Sweden)

    Kim-Phung Truong

    2017-07-01

    Full Text Available The inevitability of measurement errors and/or humans of subjectivity in data collection processes make accumulated data imprecise, and are thus called fuzzy data. To adapt to this fuzzy domain in a manufacturing process, a traditional u control chart for monitoring the average number of nonconformities per unit is required to extend. In this paper, we first generalize the u chart, named fuzzy u-chart, whose control limits are built on the basis of resolution identity, which is a well-known fuzzy set theory. Then, an approach to fuzzy-logic reasoning, incorporating the decision-maker’s varying levels of optimism towards the online process, is proposed to categorize the manufacturing conditions. In addition, we further develop a condition-based classification mechanism, where the process conditions can be discriminated into intermittent states between in-control and out-of-control. As anomalous conditions are monitored to some extent, this condition-based classification mechanism can provide the critical information to deliberate the cost of process intervention with respect to the gain of quality improvement. Finally, the proposed fuzzy u-chart is implemented in the Vietnam textile dyeing industry to replace its conventional u-chart. The results demonstrate that the industry can effectively evade unnecessary adjustments to its current processes; thus, the industry can substantially reduce its operational cost and potential loss.

  14. Developing a Current Capability Design for Manufacture Framework in the Aerospace Industry

    OpenAIRE

    Whiteside, A.; Shehab, Essam; Beadle, C.; Percival, M.

    2009-01-01

    Organised by: Cranfield University During progressive product design and development in the aerospace industry, a lack of effective communication between the sequential functions of design, manufacturing and assembly often causes delays and setbacks whereby production capabilities are unable to realise design intent in high-complexity product models. As a result, there is a need to formalise the progressive release of an engineering model to production functions during New Prod...

  15. Mixed reality system and objective ergonomics evaluation for designing work stations in manufacturing industry

    NARCIS (Netherlands)

    Rhijn, J.W. van; Bosch, T.; Looze, M.P. de

    2011-01-01

    Due to shorter productlife cycles in manufacturing industry there is a lot of pressure on the process of designing new work systems. Early attention for human factors would lower the costs compared to changes at a later stage. Low cost tools for workstations design could help especially small to

  16. Implementation Issues and Challenges in Applying Lean Manufacturing Tools & Techniques in Different Manufacturing Environments

    OpenAIRE

    Low, Kwee Ang

    2005-01-01

    Lean Manufacturing has made a significant impact on both the academic and manufacturing circles in the last decade. Fostered by a rapid spread into many other industrial sectors beyond the automotive industry, there has been significant development and "localisation" of the Lean Manufacturing concept in both developed and developing countries worldwide. Despite its successful application in a wide range of industries, little research has been carried out on its successful application outside ...

  17. Lean manufacturing in Indian context: A survey

    Directory of Open Access Journals (Sweden)

    Rakesh Kumar

    2015-04-01

    Full Text Available This paper is an attempt to examine the implementation of Lean Manufacturing system in the Indian industries. Predominant elements of Lean Manufacturing, benefits gained after its implementation and obstacles observed by Indian Industry have been recognized. The results of this survey support the opinion that Lean Manufacturing had potential to improve the organizational performance of Indian industries. Nevertheless, Indian industries are required to be passionate to transform their manufacturing by adopting Lean manufacturing to gain the full benefits. A large numbers of literature papers are available on the better side of Lean manufacturing approach and its benefits gained by manufacturing organizations after implementation. But the adverse impacts of Lean manufacturing are not discussed to a great extent. Some drawbacks of Lean manufacturing are also highlighted in this paper.

  18. 78 FR 67117 - Manufacturing Council

    Science.gov (United States)

    2013-11-08

    ... preeminent destination for investment in manufacturing throughout the world'' as provided for in Section 4 of... the viewpoint of those stakeholders on current and emerging issues in the manufacturing sector. In... the U.S. manufacturing industry in terms of industry sectors, geographic locations, demographics, and...

  19. Prolonged menstrual cycles in female workers exposed to ethylene glycol ethers in the semiconductor manufacturing industry.

    Science.gov (United States)

    Hsieh, G-Y; Wang, J-D; Cheng, T-J; Chen, P-C

    2005-08-01

    It has been shown that female workers exposed to ethylene glycol ethers (EGEs) in the semiconductor industry have higher risks of spontaneous abortion, subfertility, and menstrual disturbances, and prolonged waiting time to pregnancy. To examine whether EGEs or other chemicals are associated with long menstrual cycles in female workers in the semiconductor manufacturing industry. Cross-sectional questionnaire survey during the annual health examination at a wafer manufacturing company in Taiwan in 1997. A three tiered exposure-assessment strategy was used to analyse the risk. A short menstrual cycle was defined to be a cycle less than 24 days and a long cycle to be more than 35 days. There were 606 valid questionnaires from 473 workers in fabrication jobs and 133 in non-fabrication areas. Long menstrual cycles were associated with workers in fabrication areas compared to those in non-fabrication areas. Using workers in non-fabrication areas as referents, workers in photolithography and diffusion areas had higher risks for long menstrual cycles. Workers exposed to EGEs and isopropanol, and hydrofluoric acid, isopropanol, and phosphorous compounds also showed increased risks of a long menstrual cycle. Exposure to multiple chemicals, including EGEs in photolithography, might be associated with long menstrual cycles, and may play an important role in a prolonged time to pregnancy in the wafer manufacturing industry; however, the prevalence in the design, possible exposure misclassification, and chance should be considered.

  20. Strategies for Implementing Activity-Based Costing in the UK Manufacturing Industry

    OpenAIRE

    Cheung, Wai Ming; Tan, Kian; Tan, Swee; Sutton, Caroline

    2013-01-01

    The purpose of this paper is to report the findings with a case study on why activity based costing lacks impact in the UK manufacturing industry. Activity based costing was performed on selected MT range subsystems of an electrical power generator to compare with the current UNN UK’s conven-tional costing system. The results have found that the current costing system works well for the MT products and thus change of costing system is not necessary for these products. The activity based costi...

  1. Estimates of emergency operating capacity in U.S. manufacturing industries: 1994--2005

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, D.B.

    1997-02-01

    To develop integrated policies for mobilization preparedness, planners require estimates and projections of available productive capacity during national emergency conditions. This report develops projections of national emergency operating capacity (EOC) for 458 US manufacturing industries at the 4-digit Standard Industrial Classification (SIC) level. These measures are intended for use in planning models that are designed to predict the demands for detailed industry sectors that would occur under conditions such as a military mobilization or a major national disaster. This report is part of an ongoing series of studies prepared by the Pacific Northwest National Laboratory to support mobilization planning studies of the Federal Emergency Planning Agency/US Department of Defense (FEMA/DOD). Earlier sets of EOC estimates were developed in 1985 and 1991. This study presents estimates of EOC through 2005. As in the 1991 study, projections of capacity were based upon extrapolations of equipment capital stocks. The methodology uses time series regression models based on industry data to obtain a response function of industry capital stock to levels of industrial output. The distributed lag coefficients of these response function are then used with projected outputs to extrapolate the 1994 level of EOC. Projections of industrial outputs were taken from the intermediate-term forecast of the US economy prepared by INFORUM (Interindustry Forecasting Model, University of Maryland) in the spring of 1996.

  2. Trade Liberalization and Productivity-A Panel Study of the Mexican Manufacturing Industry

    OpenAIRE

    Talan Iscan

    1998-01-01

    In recent years there has been a revival of interest in the trade-growth nexus. A number of authors have suggested that regional economic integration and liberalization of international trade are likely to have positive effects not only on productivity levels but also on long-term productivity growth rates in developing countries. Using a panel of Mexican manufacturing industries, this paper examines several alternative mechanisms through which trade contributes positively to productivity lev...

  3. Studies on the Wood-Based Furniture, Leather Products and Footwear Manufacturing Industries in the Philippines

    OpenAIRE

    Poblador, Niceto; Solis, Adriano; Ybanez, Roy; Aragon, Bienvenido

    1983-01-01

    This paper aims to develop both the micro and macro data on the entire range of socioeconomic, managerial and technical issues faced by the wood-based furniture, footwear and leather tanning industry. The studies are intended to provide an initial base for policy formulation and implementation and to evolve a set of relevant guidelines for managerial and technical decisions. Findings show that the wood-based furniture industry is characterized by relative ease of entry that allows manufacture...

  4. Identifying and ranking of strategies to implement green supply chain management in Indian manufacturing industry using Analytical Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Sunil Luthra

    2013-09-01

    Full Text Available Purpose – The study aims to identify and rank the major strategies that help achieve successful implementation of Green Supply Chain Management (GSCM in Indian manufacturing industry.Design/methodology/approach – Strategies to implement GSCM have been identified thorough extensive literature review and then experts’ opinion is sought for categorizing them into four representative dimensions which are then ranked using Analytic Hierarchy Process (AHP.Findings – The study categorizes the GSCM implementation strategies into four dimensions - Non members of supply chain, downward stream supply chain Members, Organizational members of supply chain and upward stream supply chain members. These dimensions are found to play an important role in greening the supply chains enabling the practicing firms achieve enhanced operational performances.Research limitations/implications- AHP is used for ranking the GSCM implementation strategies in Indian manufacturing scenario. The pair-wise comparisons are made on the basis of the opinion of the experts drawn from academia and industry. As is natural, opinions of experts may not always be free from bias or prejudices. Moreover, the study relied more on the GSCM practices literature in developed nations as only limited literature related to the undertaken work in the Indian context was available.Practical implications – This paper may play important role in understanding various strategies and ranking them in order of importance. This facilitates firms prioritize different actions for achieving high GSCM performances in Indian manufacturing industry. Strategic implementation of green supply chain management will help Indian manufacturing enterprises enjoy cost and efficiency benefits.Originality/value – GSCM is a relatively new topic for majority of Indian manufacturing industries. This work is likely to help GSCM practitioners select suitable strategies in consonance with the government regulations

  5. Success of manufacturing industries – Role of Six Sigma

    Directory of Open Access Journals (Sweden)

    Venkatesh N.

    2018-01-01

    Full Text Available Six Sigma is a phenomenal quality management concepts which has helped many organizations to overcome quality crisis in the recent past. Six Sigma is observed as a very promising quality management tool for any organization to make its presence felt in the corporate world as it emphasizes on obtaining a fruitful solution to improve accuracy, reduce defect thereby reduce the cost and improve profits. The main objective of this investigation is to unearth the extent to which the companies have been benefitted due to Six Sigma implementation. This article presents the results based on the analysis of collective opinion of employees of various Indian manufacturing industries that have implemented Six Sigma. This research also examines interrelationship among various parameters defined in the research. The research revealed that industries are benefitted irrespective of their nature in terms of their growth, financial benefits, productivity and satisfaction of the customer. However, peoples’ equity that deals with the benefits that employees obtain after Six Sigma implementation is not certain. The research also revealed the existence of strong interrelationship among various parameters used to measure the success of Six Sigma.

  6. Flexibility configurations and preventive maintenance impact on job-shop manufacturing systems

    OpenAIRE

    Paolo Renna

    2017-01-01

    Manufacturing systems need to be able to work under the dynamic and uncertain production environment. Machine and routing flexibility combined with preventive maintenance actions can improve the performance of the manufacturing systems under dynamic conditions. This paper evaluates different levels of machine and routing flexibility combined with different degrees of preventive maintenance policy. The performance measures considered are throughput, work in process and throughput. The performa...

  7. Carbon footprint as environmental performance indicator for the manufacturing industry

    DEFF Research Database (Denmark)

    Laurent, Alexis; Olsen, Stig Irving; Hauschild, Michael Zwicky

    2010-01-01

    With the current focus on our climate change impacts, the embodied CO2 emission or "Carbon footprint" is often used as an environmental performance indicator for our products or production activities. The ability of carbon footprint to represent other types of impact like human toxicity, and hence...... the overall environmental impact is investigated based on life cycle assessments of several materials of major relevance to manufacturing industries. The dependence of the carbon footprint on the assumed scenarios for generation of thermal and electrical energy in the life cycle of the materials is analyzed......, and the appropriateness of carbon footprint as an overall indicator of the environmental performance is discussed....

  8. A case study analysis of the application of design for manufacture principles by industrial design students

    OpenAIRE

    Marshall, R; Page, T

    2016-01-01

    This paper describes a case study evaluation of a module that engages students on product and industrial design programmes with the principles of Design for Manufacturing (DFM). The primary element of the module is to expose students to the constraints of a full design to manufacture process. The module explores the design of a small polymer promotional item, together with the means of mass producing that item. This is done through the process of injection moulding and students design an inje...

  9. Industrial assessment of radiofrequency and microwave radiations: case study at electronic manufacturing industries in Penang

    International Nuclear Information System (INIS)

    Mohd Zaid Abdullah

    1996-01-01

    In electronic manufacturing industry, the applications of an equipment emitting radiofrequency radiation (RFR) are numerous and Increasing. It is known that exposure to RFR at sufficiently high intensity and duration can produce a variety of adverse health effects. This paper presents some results from an extensive studies in the RFR field measurements at frequency range from 100 MHz to 1 GHz. All measurements were performed inside factories located at the Penang Free Trade Zone. In this case, the factories chosen are those that manufacture the electronic components whereby the applications of RFR equipment are likely to be intensive compared to other type of industries. The measurement system used in this study are the portable spectrum-analyzer, the passive log-periodic antenna and a desktop computer for data analysis. Results from this study have indicated that the RFR exposure levels in most factories are in the range of 7.7 x 10 sup -4 - 4.31 x 10 sup -3 Wm sup -2 and 0.01 - 0. 741 Vm sup -1 for power density and electric strength measurement respectively. These ranges are at least 100 times lower compared to the RFR protection guidelines proposed by the American National Standard Institute (ANSI). However, the exposure levels inside the factory are consistently 10 sup -3 - 10 sup -4 higher than the levels caused by natural sources and is about 10 sup 2 - 10 sup 6 higher than the levels measured at a distance of 30 m from a low-power output mobile phone transmitter. In the case of the health effect assessment, no sufficient evidence has been found to indicate the potential consequences resulting from excessive RFR exposure. Nonetheless, many factories surveyed are unaware of the existence of the international guidelines and codes on the safe use of radiofrequency energy even though, some measures are being taken to protect their employees against RFR

  10. [Manufacture of upholstered furniture and work-related upper limb musculoskeletal disorders: an industrial sector prevention project].

    Science.gov (United States)

    Di Leone, G; Carino, M; Nicoletti, S; Trani, G; Ambrosi, L

    2008-01-01

    In cooperation with the IRCCS Fondazione Maugeri and the IRCCS Fondazione Ospedale Maggiore Policlinico - EPM-CEMOC, of Milan, the Local Health Unit in Bari, Italy carried out a research project, sponsored partly by the Italian Ministry of Health, on upper limb work-related musculoskeletal disorders (UL-WMSDs) in a specific manufacturing sector, the upholstered furniture industry. This "sofa district" is widely represented with approximately 14,000 workers and 500 factories over a wide geographic area of southern Italy. Advanced technology in the manufacturing process is combined with workers performing intensive arm-hand tasks. The aim of the study included: a) assessment of exposure to repetitive strain and movements of the upper limb in a representative sample of the factories using the OCRA method, b) analysis of the annual prevalence and incidence rates, c) definition of possible improvement via ergonomic solutions in the various factories. Via a network of occupational physicians a total of more than 6000 subjects were examined over a 5-year period. Case-definition was assessed through standardized procedures. A detailed description of the manufacturing process of the upholstered furniture industry and of the characteristics of the working population is provided Exposed groups at risk were:filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. Data collected in private companies of different size in this extensive industrial "sofa area" emphasize the importance of prevention through adequate ergonomic solutions and the need to improve training programmes covering the whole area.

  11. Algorithm of choosing type of mechanical assembly production of instrument making enterprises of Industry 4.0

    Science.gov (United States)

    Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.; Zharinov, O. O.

    2018-05-01

    The task of the algorithm of choosing the type of mechanical assembly production of instrument making enterprises of Industry 4.0 is being studied. There is a comparison of two project algorithms for Industry 3.0 and Industry 4.0. The algorithm of choosing the type of mechanical assembly production of instrument making enterprises of Industry 4.0 is based on the technological route analysis of the manufacturing process in a company equipped with cyber and physical systems. This algorithm may give some project solutions selected from the primary part or the auxiliary one of the production. The algorithm decisive rules are based on the optimal criterion.

  12. Exploring the Technological Collaboration Characteristics of the Global Integrated Circuit Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Yun Liu

    2018-01-01

    Full Text Available With the intensification of international competition, there are many international technological collaborations in the integrated circuit manufacturing (ICM industry. The importance of improving the level of international technological collaboration is becoming more and more prominent. Therefore, it is vital for a country, a region, or an institution to understand the international technological collaboration characteristics of the ICM industry and, thus, to know how to enhance its own international technological collaboration. This paper depicts the international technological collaboration characteristics of the ICM industry based on patent analysis. Four aspects, which include collaboration patterns, collaboration networks, collaboration institutions, and collaboration impacts, are analyzed by utilizing patent association analysis and social network analysis. The findings include the following: first, in regard to international technological collaboration, the USA has the highest level, while Germany has great potential for future development; second, Asia and Europe have already formed clusters, respectively, in the cooperative network; last, but not least, research institutions, colleges, and universities should also actively participate in international collaboration. In general, this study provides an objective reference for policy making, competitiveness, and sustainability in the ICM industry. The framework presented in this paper could be applied to examine other industrial international technological collaborations.

  13. Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing

    Science.gov (United States)

    Meng, Bo; Cheng, Lihong

    2017-01-01

    The rise of global value chains (GVCs) characterized by the so-called “outsourcing”, “fragmentation production”, and “trade in tasks” has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014) and Wang et al. (2013) in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics. PMID:28081201

  14. Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing.

    Directory of Open Access Journals (Sweden)

    Hao Xiao

    Full Text Available The rise of global value chains (GVCs characterized by the so-called "outsourcing", "fragmentation production", and "trade in tasks" has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014 and Wang et al. (2013 in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics.

  15. Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing.

    Science.gov (United States)

    Xiao, Hao; Sun, Tianyang; Meng, Bo; Cheng, Lihong

    2017-01-01

    The rise of global value chains (GVCs) characterized by the so-called "outsourcing", "fragmentation production", and "trade in tasks" has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014) and Wang et al. (2013) in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics.

  16. Spatial Agglomeration, Human and Social Capital: The Case of Turkey Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Özer Karakayacı

    2017-12-01

    Full Text Available Over the last three decades, new economic theories explode the factors depending on space and spatial characteristics. In this process, it is developed the theories on social-cultural aspects and spatial characteristics of regions instead of traditional economic theories. These theories have been main strategy for economic development and growth. Economic development has not been considered independently from space by these theories and economic performance of a region was emphasized importance of economic actors, institutional and economic infrastructure as well as geographic features. Geography or spatial features contribute to increase not only skilled workforce, knowledge spillover and distribution but also social relations and interaction. In other words, the social-cultural and humanity factors relating with spatial and geography are major factors affecting on the development and also growing of economic activities. Especially, while industrialization as engine of regional development has been benefiting from the advantages offered by spatial features, clustering of economic activities and relationships among actors are shaped according to socio-cultural and human factors revealed spatial features. In this context, clustering of economic activities has been one of the new areas of interest in the theory of economic geography. Therefore, clustering of economic activities and human-social-spatial resources has been emphasized to play a major role in growth and development of regions by essays of the new economic geography. In that context, the aim of this paper is to determine the effects of human and social capital in the spatial agglomeration of economic activities in case of Konya-Turkey. In this study, the agglomeration tendencies for manufacturing industry in Konya, which have major potentials in terms of human and social capital and manufacturing industry potential, is analysed comparatively depending on secondary resources and using

  17. Delay-Aware Energy-Efficient Routing towards a Path-Fixed Mobile Sink in Industrial Wireless Sensor Networks

    Science.gov (United States)

    Wu, Shaobo; Chou, Wusheng; Niu, Jianwei; Guizani, Mohsen

    2018-01-01

    Wireless sensor networks (WSNs) involve more mobile elements with their widespread development in industries. Exploiting mobility present in WSNs for data collection can effectively improve the network performance. However, when the sink (i.e., data collector) path is fixed and the movement is uncontrollable, existing schemes fail to guarantee delay requirements while achieving high energy efficiency. This paper proposes a delay-aware energy-efficient routing algorithm for WSNs with a path-fixed mobile sink, named DERM, which can strike a desirable balance between the delivery latency and energy conservation. We characterize the object of DERM as realizing the energy-optimal anycast to time-varying destination regions, and introduce a location-based forwarding technique tailored for this problem. To reduce the control overhead, a lightweight sink location calibration method is devised, which cooperates with the rough estimation based on the mobility pattern to determine the sink location. We also design a fault-tolerant mechanism called track routing to tackle location errors for ensuring reliable and on-time data delivery. We comprehensively evaluate DERM by comparing it with two canonical routing schemes and a baseline solution presented in this work. Extensive evaluation results demonstrate that DERM can provide considerable energy savings while meeting the delay constraint and maintaining a high delivery ratio. PMID:29562628

  18. Delay-Aware Energy-Efficient Routing towards a Path-Fixed Mobile Sink in Industrial Wireless Sensor Networks.

    Science.gov (United States)

    Wu, Shaobo; Chou, Wusheng; Niu, Jianwei; Guizani, Mohsen

    2018-03-18

    Wireless sensor networks (WSNs) involve more mobile elements with their widespread development in industries. Exploiting mobility present in WSNs for data collection can effectively improve the network performance. However, when the sink (i.e., data collector) path is fixed and the movement is uncontrollable, existing schemes fail to guarantee delay requirements while achieving high energy efficiency. This paper proposes a delay-aware energy-efficient routing algorithm for WSNs with a path-fixed mobile sink, named DERM, which can strike a desirable balance between the delivery latency and energy conservation. We characterize the object of DERM as realizing the energy-optimal anycast to time-varying destination regions, and introduce a location-based forwarding technique tailored for this problem. To reduce the control overhead, a lightweight sink location calibration method is devised, which cooperates with the rough estimation based on the mobility pattern to determine the sink location. We also design a fault-tolerant mechanism called track routing to tackle location errors for ensuring reliable and on-time data delivery. We comprehensively evaluate DERM by comparing it with two canonical routing schemes and a baseline solution presented in this work. Extensive evaluation results demonstrate that DERM can provide considerable energy savings while meeting the delay constraint and maintaining a high delivery ratio.

  19. Delay-Aware Energy-Efficient Routing towards a Path-Fixed Mobile Sink in Industrial Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Shaobo Wu

    2018-03-01

    Full Text Available Wireless sensor networks (WSNs involve more mobile elements with their widespread development in industries. Exploiting mobility present in WSNs for data collection can effectively improve the network performance. However, when the sink (i.e., data collector path is fixed and the movement is uncontrollable, existing schemes fail to guarantee delay requirements while achieving high energy efficiency. This paper proposes a delay-aware energy-efficient routing algorithm for WSNs with a path-fixed mobile sink, named DERM, which can strike a desirable balance between the delivery latency and energy conservation. We characterize the object of DERM as realizing the energy-optimal anycast to time-varying destination regions, and introduce a location-based forwarding technique tailored for this problem. To reduce the control overhead, a lightweight sink location calibration method is devised, which cooperates with the rough estimation based on the mobility pattern to determine the sink location. We also design a fault-tolerant mechanism called track routing to tackle location errors for ensuring reliable and on-time data delivery. We comprehensively evaluate DERM by comparing it with two canonical routing schemes and a baseline solution presented in this work. Extensive evaluation results demonstrate that DERM can provide considerable energy savings while meeting the delay constraint and maintaining a high delivery ratio.

  20. Exact method for the vehicle routing problem with mixed linehaul and backhaul customers, heterogeneous fleet, time window and manufacturing capacity

    OpenAIRE

    Oesterle, Jonathan; Bauernhansl, Thomas

    2016-01-01

    Due to concerns over food safety, quality, and transparency, the food industry has been challenged to deal with an increased complexity in its logistics and production planning. This complexity is mostly associated to the task of optimally exploring a highly constrained solution space. This paper addresses the problem of designing a set of vehicle routes satisfying the delivery and the collection requirements of a set of geographically scattered linehaul and backhaul customers. Each customer ...

  1. BARRIERS TO THE USE OF RADIATION-CURABLE ADHESIVES IN THE COATED AND LAMINATED SUBSTRATE MANUFACTURING INDUSTRY

    Science.gov (United States)

    The paper gives results of an investigation of barriers to the use of radiation-cured technology in the coated and laminated substrate manufacturing industry. t presents information gathered from radiation-curable coating and equipment suppliers as well as technical publications....

  2. Long Working Hours and Emotional Well-Being in Korean Manufacturing Industry Employees

    OpenAIRE

    Lee, Kyoung-Hye; Kim, Jong-Eun; Kim, Young-Ki; Kang, Dong-Mug; Yun, Myeong-Ja; Park, Shin-Goo; Song, Jae-Seok; Lee, Sang-Gil

    2013-01-01

    Objectives Korea is well known for its long work hours amongst employees. Because workers of the manufacturing industry are constantly exposed to extended work hours, this study was based on how long work hours affect their emotional well-being. Methods The analysis was done using the secondary Korean Working Condition Survey (KWCS). Long work hours were defined to be more than 48 hours, and they were subcategorized into units of 52 hours and 60 hours. Based on the WHO (five) well-being index...

  3. Statistical applications for chemistry, manufacturing and controls (CMC) in the pharmaceutical industry

    CERN Document Server

    Burdick, Richard K; Pfahler, Lori B; Quiroz, Jorge; Sidor, Leslie; Vukovinsky, Kimberly; Zhang, Lanju

    2017-01-01

    This book examines statistical techniques that are critically important to Chemistry, Manufacturing, and Control (CMC) activities. Statistical methods are presented with a focus on applications unique to the CMC in the pharmaceutical industry. The target audience consists of statisticians and other scientists who are responsible for performing statistical analyses within a CMC environment. Basic statistical concepts are addressed in Chapter 2 followed by applications to specific topics related to development and manufacturing. The mathematical level assumes an elementary understanding of statistical methods. The ability to use Excel or statistical packages such as Minitab, JMP, SAS, or R will provide more value to the reader. The motivation for this book came from an American Association of Pharmaceutical Scientists (AAPS) short course on statistical methods applied to CMC applications presented by four of the authors. One of the course participants asked us for a good reference book, and the only book recomm...

  4. Toward New-Generation Intelligent Manufacturing

    Directory of Open Access Journals (Sweden)

    Ji Zhou

    2018-02-01

    Full Text Available Intelligent manufacturing is a general concept that is under continuous development. It can be categorized into three basic paradigms: digital manufacturing, digital-networked manufacturing, and new-generation intelligent manufacturing. New-generation intelligent manufacturing represents an in-depth integration of new-generation artificial intelligence (AI technology and advanced manufacturing technology. It runs through every link in the full life-cycle of design, production, product, and service. The concept also relates to the optimization and integration of corresponding systems; the continuous improvement of enterprises’ product quality, performance, and service levels; and reduction in resources consumption. New-generation intelligent manufacturing acts as the core driving force of the new industrial revolution and will continue to be the main pathway for the transformation and upgrading of the manufacturing industry in the decades to come. Human-cyber-physical systems (HCPSs reveal the technological mechanisms of new-generation intelligent manufacturing and can effectively guide related theoretical research and engineering practice. Given the sequential development, cross interaction, and iterative upgrading characteristics of the three basic paradigms of intelligent manufacturing, a technology roadmap for “parallel promotion and integrated development” should be developed in order to drive forward the intelligent transformation of the manufacturing industry in China. Keywords: Advanced manufacturing, New-generation intelligent manufacturing, Human-cyber-physical system, New-generation AI, Basic paradigms, Parallel promotion, Integrated development

  5. Pioneering the combined use of agile and stage-gate models in new product development–cases from the manufacturing industry

    DEFF Research Database (Denmark)

    Ahmed-Kristensen, Saeema; Daalhuizen, Jaap

    2015-01-01

    Stage gate models have long been the norm in manufacturing industries. Whereas agile models, such as scrum, are standard amongst software industries. These two models have been traditionally been pitted against one another, each with its own advantages and limitations. A new trend is being observed...

  6. A case study on implementing lean ergonomic manufacturing systems (LEMS) in an automobile industry

    Science.gov (United States)

    Srinivasa Rao, P.; Niraj, Malay

    2016-09-01

    Lean manufacturing is a business strategy developed in Japan. In the present scenario, the global market is developing new techniques for getting more and more production rate with a good quality under low cost. In this context, human factors have to be given importance to their working conditions. The study demonstrates the adoption of ergonomic conditions in lean manufacturing for the improvement of organizational performance of the industry. The aim of ergonomics is to adapt the new techniques to their work in efficient and safe ways in order to optimize the human health conditions and increasing the production rate. By conducting survey on various disciplines and showed how the production rate and human ergonomic conditions is affected.

  7. Big Data Analytics for Smart Manufacturing: Case Studies in Semiconductor Manufacturing

    Directory of Open Access Journals (Sweden)

    James Moyne

    2017-07-01

    Full Text Available Smart manufacturing (SM is a term generally applied to the improvement in manufacturing operations through integration of systems, linking of physical and cyber capabilities, and taking advantage of information including leveraging the big data evolution. SM adoption has been occurring unevenly across industries, thus there is an opportunity to look to other industries to determine solution and roadmap paths for industries such as biochemistry or biology. The big data evolution affords an opportunity for managing significantly larger amounts of information and acting on it with analytics for improved diagnostics and prognostics. The analytics approaches can be defined in terms of dimensions to understand their requirements and capabilities, and to determine technology gaps. The semiconductor manufacturing industry has been taking advantage of the big data and analytics evolution by improving existing capabilities such as fault detection, and supporting new capabilities such as predictive maintenance. For most of these capabilities: (1 data quality is the most important big data factor in delivering high quality solutions; and (2 incorporating subject matter expertise in analytics is often required for realizing effective on-line manufacturing solutions. In the future, an improved big data environment incorporating smart manufacturing concepts such as digital twin will further enable analytics; however, it is anticipated that the need for incorporating subject matter expertise in solution design will remain.

  8. Comparative Analysis of Two Industries for Validating Green Manufacturing (GM) Framework: An Indian Scenario

    Science.gov (United States)

    Rehman, Minhaj Ahemad Abdul; Shrivastava, Rakesh Lakshmikumar; Shrivastava, Rashmi Rakesh

    2017-04-01

    Green Manufacturing (GM) deals with manufacturing practices that reduces or eliminates the adverse environmental impact during any of its phases. It emphasizes the use of processes that do not contaminate the environment or hurt consumers, employees, or other stakeholders. This paper presents the comparative analysis of two Indian industries representing different sectors for validating GM framework. It also highlights the road map of the companies for achieving performance improvement through GM implementation and its impact on organisational performance. The case studies helps in evaluating the companies GM implementation and overall business performance. For this, a developed diagnostic instrument in the form of questionnaire was administered amongst employees in the companies respectively and their responses were analysed. In order to have a better understanding of the impact of GM implementation, the information about overall business performance was obtained over the last 3 years. The diagnostic instrument developed here may be used by manufacturing organisations to prioritise their management efforts to assess and implement GM.

  9. Manufacturing processes in the textile industry. Expert Systems for fabrics production

    Directory of Open Access Journals (Sweden)

    Juan BULLON

    2017-03-01

    Full Text Available The textile industry is characterized by the economic activity whose objective is the production of fibres, yarns, fabrics, clothing and textile goods for home and decoration,as well as technical and industrial purposes. Within manufacturing, the Textile is one of the oldest and most complex sectors which includes a large number of sub-sectors covering the entire production cycle, from raw materials and intermediate products, to the production of final products. Textile industry activities present different subdivisions, each with its own traits. The length of the textile process and the variety of its technical processes lead to the coexistence of different sub-sectors in regards to their business structure and integration. The textile industry is developing expert systems applications to increase production, improve quality and reduce costs. The analysis of textile designs or structures includes the use of mathematical models to simulate the behavior of the textile structures (yarns, fabrics and knitting. The Finite Element Method (FEM has largely facilitated the prediction of the behavior of that textile structure under mechanical loads. For classification problems Artificial Neural Networks (ANNs haveproved to be a very effective tool as a quick and accurate solution. The Case-Based Reasoning (CBR method proposed in this study complements the results of the finite element simulation, mathematical modeling and neural networks methods.

  10. The history of the peat manufacturing industry in The Netherlands: Peat moss litter and active carbon

    Directory of Open Access Journals (Sweden)

    M.A.W. Gerding

    2015-11-01

    Full Text Available This article describes the development of three major forms of peat processing by the manufacturing industry in The Netherlands since the last quarter of the 19th century. At a time when peat as a fuel was gradually being replaced by coal, the first form was the peat moss litter industry. Peat moss litter was made from white peat that was ground and sieved in factories which were located mainly in bog areas in the south-east of the province of Drenthe. It served as excellent bedding for horses and cattle. The second form of industrial peat processing was the manufacture, from 1921 onwards, of active carbon made from black peat. The Purit (Norit factory, now part of the Cabot Corporation, is still the only active carbon factory using peat as a raw material. The third form of peat processing was the production of garden peat and potting soil. This is still a widespread activity in peat areas all over the world. The peat moss litter industry thrived from the 1880s until shortly after the First World War. The arrival of the horse-drawn tram in all of the major cities of Europe created a great demand for animal bedding to be used in the vast stables of the tramway companies. Peat moss litter was cleaner, healthier and easier to handle than straw. There was similar demand from the armies, which used millions of horses during the First World War. Owing to the development of motorised vehicles, the peat market collapsed after the war and this plunged the industry into a prolonged crisis which was not overcome until peat was found to be a suitable growing medium for horticulture in the 1950s. Living and working conditions in peatlands were harsh, earnings irregular and labourers’ rights limited. The peat manufacturing industry was the first to introduce collective labour agreements, medical benefits and pension plans. Nonetheless massive unemployment, poverty and the necessity to migrate to other parts of the country were clear signs that the era of

  11. IDENTIFICATION OF FACTORS AFFECTING LEAN MANUFACTURING IMPLEMENTATION IN PUMP MANUFACTURING COMPANIES IN INDIA - A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Pratik Badgujar

    2016-09-01

    Full Text Available Lean Manufacturing has now become a common word in the industrial corridors. It has now been applied to the industries of several domains. No wonder that the Pump manufacturing has also witnessed profound influence of Lean philosophy. Pump manufacturing in India has a history as old as 80 years with more than 500 pump manufacturing units presently working. The present research is an explorative study and was undertaken to identify various factors affecting lean manufacturing implementation in pump manufacturing industry. Analysis of results revealed that the companies registered increase in productivity and reduction in costs and wastes. Lack of understanding, Supply chain and Company culture are found to be the strongest barriers of lean manufacturing implementation. The multiple regression model revealed that Lack of workers support can be fairly reduced by educating them about Lean Manufacturing and establishing a healthy communication with workers. An analysis across different management levels revealed disparity in perceptions and views of personnel. There is a need for top management to align organization toward common goals so as to achieve better success in implementing lean manufacturing.

  12. Evaluation of Project Based Learning in the Area of Manufacturing and Statistics in the Degree of Industrial Technology

    Science.gov (United States)

    Buj-Corral, Irene; Marco-Almagro, Lluís; Riba, Alex; Vivancos-Calvet, Joan; Tort-Martorell, Xavier

    2015-01-01

    In the subject Project I in the second year of the Degree in Industrial Technology Engineering taught at the School of Industrial Engineering of Barcelona (ETSEIB), subgroups of 3-4 students within groups of 20 students develop a project along a semester. Results of 2 projects are presented related to manufacturing, measurement of parts and the…

  13. Analysis of phthalate esters in soils near an electronics manufacturing facility and from a non-industrialized area by gas purge microsyringe extraction and gas chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Wei [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China); Hu, Jia [Suzhou Center for Disease Prevention and Control, Suzhou, Jiangsu (China); Wang, Jinqi; Chen, Xuerong; Yao, Na [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China); Tao, Jing, E-mail: jingtao1982@126.com [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China); Zhou, Yi-Kai, E-mail: zhouyk@mails.tjmu.edu.cn [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China)

    2015-03-01

    Here, a novel technique is described for the extraction and quantitative determination of six phthalate esters (PAEs) from soils by gas purge microsyringe extraction and gas chromatography. Recovery of PAEs ranged from 81.4% to 120.3%, and the relative standard deviation (n = 6) ranged from 5.3% to 10.5%. Soil samples were collected from roadsides, farmlands, residential areas, and non-cultivated areas in a non-industrialized region, and from the same land-use types within 1 km of an electronics manufacturing facility (n = 142). Total PAEs varied from 2.21 to 157.62 mg kg{sup −1} in non-industrialized areas and from 8.63 to 171.64 mg kg{sup −1} in the electronics manufacturing area. PAE concentrations in the non-industrialized area were highest in farmland, followed (in decreasing order) by roadsides, residential areas, and non-cultivated soil. In the electronics manufacturing area, PAE concentrations were highest in roadside soils, followed by residential areas, farmland, and non-cultivated soils. Concentrations of dimethyl phthalate (DMP), diethyl phthalate (DEP), and di-n-butyl phthalate (DnBP) differed significantly (P < 0.01) between the industrial and non-industrialized areas. Principal component analysis indicated that the strongest explanatory factor was related to DMP and DnBP in non-industrialized soils and to butyl benzyl phthalate (BBP) and DMP in soils near the electronics manufacturing facility. Congener-specific analysis confirmed that diethylhexyl phthalate (DEHP) was a predictive indication both in the non-industrialized area (r{sup 2} = 0.944, P < 0.01) and the industrialized area (r{sup 2} = 0.860, P < 0.01). The higher PAE contents in soils near the electronics manufacturing facility are of concern, considering the large quantities of electronic wastes generated with ongoing industrialization. - Highlights: • A new method for determining phthalate esters in soil samples was developed. • Investigate six phthalates near an industry and a

  14. Research overview: Advanced Manufacturing in Switzerland

    OpenAIRE

    Schärer, Claudia

    2016-01-01

    SATW is convinced that industrial production methods will see fundamental changes over the coming years. Mastering new production technologies (advanced manufacturing) such as additive manufacturing and industry 4.0 will be vital to keep Swiss production at a competitive level. New additive manufacturing processes such as 3D printing offer revolutionary opportunities and have the potential to replace traditional production methods. Industry 4.0 has seen the definition of a new concept for...

  15. Understanding industrial energy use: Physical energy intensity changes in Indian manufacturing sector

    International Nuclear Information System (INIS)

    Sudhakara Reddy, B.; Kumar Ray, Binay

    2011-01-01

    This study develops and examines physical energy intensity indicators in five industrial sub-sectors-iron and steel, aluminum, textiles, paper, and cement-and investigates mitigation options for energy related CO 2 emissions (during 1991-2005). Decomposition analysis has been employed to separate the structural effect (share of different products in the sector) from pure intensity effect (efficiency increase through technical improvement) for each industry. The results show that the combined effect (considering both structural and intensity effects together) on both iron and steel and paper and pulp industries is negative while it is positive for aluminum and textiles. The intensity effect for all the industries, barring textiles, is negative showing improvement in energy efficiency; iron and steel in particular, has seen a decrease of 134 PJ in energy consumption owing to improvements in efficiency. However, energy intensity in textiles has risen by 47 PJ due to increased mechanization. Structural effect is positive in aluminum and iron and steel industries indicating a movement towards higher energy-intensive products. In the case of aluminum, positive structural effect dominates over negative intensive effect whereas negative intensive effect dominates iron and steel industry. The paper helps in designing policies for improving productivity and reduce energy consumption in India's manufacturing sector. - Highlights: → The study develops physical energy intensity indicators in industrial sub-sectors of India. → It identifies technological and other options for reduction in energy consumption. → The study quantifies savings in energy as well as CO 2 emissions. → The indicators are useful in examining structural changes.

  16. The demand for labor and capital inputs in irish manufacturing-industries, 1953-1973

    OpenAIRE

    Boyle, G.E.; Sloane, P.D.

    1982-01-01

    Precis: Factor-demand functions are estimated, for two types of labour (wage-earners and salaried-workers) and capital, for 40 manufacturing industries. Two sets of elasticity results are reported. The first set implicitly assumes Hicks-neutral technical change. The second set by including a time trend as an additional explanatory variable, relaxes this constraint. The magnitudes of the elasticity estimates are greater for the specification which includes the time trend. In the latter case, f...

  17. Role of embodied energy in the European manufacturing industry: Application to short-term impacts of a carbon tax

    International Nuclear Information System (INIS)

    Bordigoni, Mathieu; Hita, Alain; Le Blanc, Gilles

    2012-01-01

    Role of energy in the manufacturing industry is a major concern for energy and environmental policy design. Issues like energy prices, security of supply and carbon mitigation are often connected to the industry and its competitiveness. This paper examines the role and consequences of embodied energy in the European industry. To this end, a multi-regional input–output analysis including 59 industrial sectors for all European Union countries and 17 more aggregated industries for other regions of the World is developed. Other segments of the economy are not included. This base is combined with energy consumption, carbon emission as well as bilateral trade data for every sector in all included countries. Our main result is that embodied energy in manufactured products' imports represents a significant aspect of the energy situation in European industries, with quantities close to the direct energy consumption. These flows can further be broken down for detailed analysis at the sector level thanks to the number of distinct industries included. Results demonstrate that an important part of embodied energy inside European products is not concerned with domestic energy price changes. In addition, a European-wide carbon tax would induce an unbalanced burden on industries and countries. - Highlights: ► We calculate embodied energy and carbon flows in the European and World industry. ► A multi-regional input–output analysis is used with a detailed nomenclature. ► National industries' energy prices dependence is a domestic issue. ► With a European carbon tax energy-intensive industries would be penalised. ► Such a tax may also induce competition distortion among EU countries.

  18. Energy policies for increased industrial energy efficiency: Evaluation of a local energy programme for manufacturing SMEs

    International Nuclear Information System (INIS)

    Thollander, Patrik; Danestig, Maria; Rohdin, Patrik

    2007-01-01

    The most extensive action targeting the adoption of energy efficiency measures in small- and medium-sized manufacturing industries in Sweden over the past 15 years was project Highland. This paper presents an evaluation of the first part of this local industrial energy programme, which shows an adoption rate of more than 40% when both measures that have already been implemented and measures that are planned to be implemented are included. A comparison between this programme and another major ongoing programme for the Swedish energy-intensive industry indicates that the approach used in project Highland aimed at small- and medium-sized industries is an effective way to increase energy efficiency in the Swedish industry. The major barriers to energy efficiency among the firms were related to the low priority of the energy efficiency issue

  19. SVM-Based Dynamic Reconfiguration CPS for Manufacturing System in Industry 4.0

    Directory of Open Access Journals (Sweden)

    Hyun-Jun Shin

    2018-01-01

    Full Text Available CPS is potential application in various fields, such as medical, healthcare, energy, transportation, and defense, as well as Industry 4.0 in Germany. Although studies on the equipment aging and prediction of problem have been done by combining CPS with Industry 4.0, such studies were based on small numbers and majority of the papers focused primarily on CPS methodology. Therefore, it is necessary to study active self-protection to enable self-management functions, such as self-healing by applying CPS in shop-floor. In this paper, we have proposed modeling of shop-floor and a dynamic reconfigurable CPS scheme that can predict the occurrence of anomalies and self-protection in the model. For this purpose, SVM was used as a machine learning technology and it was possible to restrain overloading in manufacturing process. In addition, we design CPS framework based on machine learning for Industry 4.0, simulate it, and perform. Simulation results show the simulation model autonomously detects the abnormal situation and it is dynamically reconfigured through self-healing.

  20. Industrial production and professional application of manufactured nanomaterials-enabled end products in Dutch industries: potential for exposure.

    Science.gov (United States)

    Bekker, Cindy; Brouwer, Derk H; Tielemans, Erik; Pronk, Anjoeka

    2013-04-01

    In order to make full use of the opportunities while responsibly managing the risks of working with manufactured nanomaterials (MNM), we need to gain insight into the potential level of exposure to MNM in the industry. Therefore, the goal of this study was to obtain an overview of the potential MNM exposure scenarios within relevant industrial sectors, applied exposure controls, and number of workers potentially exposed to MNM in Dutch industrial sectors producing and applying MNM-enabled end products in the Netherlands. A survey was conducted in three phases: (i) identification of MNM-enabled end products; (ii) identification of relevant industrial sectors; and (iii) a tiered telephone survey to estimate actual use of the products among 40 sector organizations/knowledge centres (Tier 1), 350 randomly selected companies (Tier 2), and 110 actively searched companies (Tier 3). The most dominant industrial sectors producing or applying MNM-enabled end products (market penetration >5%) are shoe repair shops, automotive, construction, paint, metal, and textile cleaning industry. In the majority of the companies (76%), potential risks related to working with MNM are not a specific point of interest. The total number of workers potentially exposed to MNM during the production or application of MNM-enabled end products was estimated at approximately 3000 workers in the Netherlands. The results of this study will serve as a basis for in-depth exposure and health surveys that are currently planned in the Netherlands. In addition, the results can be used to identify the most relevant sectors for policy makers and future studies focussing on evaluating the risks of occupational exposure to MNM.

  1. 78 FR 41069 - Medical Device Reporting for Manufacturers; Draft Guidance for Industry and Food and Drug...

    Science.gov (United States)

    2013-07-09

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-D-0743] Medical Device Reporting for Manufacturers; Draft Guidance for Industry and Food and Drug Administration Staff; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and...

  2. Principles of designing cyber-physical system of producing mechanical assembly components at Industry 4.0 enterprise

    Science.gov (United States)

    Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

    2018-03-01

    The task of developing principles of cyber-physical system constitution at the Industry 4.0 company of the item designing components of mechanical assembly production is being studied. The task has been solved by analyzing the components and technologies, which have some practical application in the digital production organization. The list of components has been defined and the authors proposed the scheme of the components and technologies interconnection in the Industry 4.0 of mechanical assembly production to make an uninterrupted manufacturing route of the item designing components with application of some cyber-physical systems.

  3. Introducing a Novel Hybrid Artificial Intelligence Algorithm to Optimize Network of Industrial Applications in Modern Manufacturing

    Directory of Open Access Journals (Sweden)

    Aydin Azizi

    2017-01-01

    Full Text Available Recent advances in modern manufacturing industries have created a great need to track and identify objects and parts by obtaining real-time information. One of the main technologies which has been utilized for this need is the Radio Frequency Identification (RFID system. As a result of adopting this technology to the manufacturing industry environment, RFID Network Planning (RNP has become a challenge. Mainly RNP deals with calculating the number and position of antennas which should be deployed in the RFID network to achieve full coverage of the tags that need to be read. The ultimate goal of this paper is to present and evaluate a way of modelling and optimizing nonlinear RNP problems utilizing artificial intelligence (AI techniques. This effort has led the author to propose a novel AI algorithm, which has been named “hybrid AI optimization technique,” to perform optimization of RNP as a hard learning problem. The proposed algorithm is composed of two different optimization algorithms: Redundant Antenna Elimination (RAE and Ring Probabilistic Logic Neural Networks (RPLNN. The proposed hybrid paradigm has been explored using a flexible manufacturing system (FMS, and results have been compared with Genetic Algorithm (GA that demonstrates the feasibility of the proposed architecture successfully.

  4. Manufacturing radioactive material for medical, research and industrial applications

    International Nuclear Information System (INIS)

    Seidel, C.W.

    1992-01-01

    Hospitals, clinics and other medical complexes are among the most extensive users of radioactive material. Nuclear medicine uses radioactive solutions of Tc-99m, Tl-201, Ga-67, I-123, Xe-133 and other radiopharmaceuticals as diagnostic tools to evaluate dynamic functions of various organs in the body, detect cancerous tumors, sites of infection or other bodily dysfunctions. Examples of monitoring blood flow to the brain of a cocaine addict will be shown. Many different radionuclides are also produced for life science research and industrial applications. Some require long irradiations and are needed only periodically. Radiopharmaceutical manufactures look for reliable suppliers that can produce quality product at a reasonable cost. Worldwide production of the processed and unprocessed radionuclides and the enriched stable nuclides that are the target materials used in the accelerators and reactors around the world will be discussed. (author)

  5. ISO in the Construction and Manufacturing Companies: A Case Study from the Construction Industry of Hyderabad and Karachi, Pakistan

    OpenAIRE

    Nafees Ahmed Memon; Qazi Muhammad Moinuddin Abro; Zubair Ahmed Memon

    2011-01-01

    Construction industry plays very important role in development of any country. The development of construction industry depends to a larger extent on quality of construction productions and projects. Quality of construction productions and projects is linked with the implementation of QMS (Quality Management System) in construction organizations. ISO certification is one of the QMS which has been adopted in manufacturing and construction industry at the global level. The constr...

  6. A Location-Inventory-Routing Problem in Forward and Reverse Logistics Network Design

    Directory of Open Access Journals (Sweden)

    Qunli Yuchi

    2016-01-01

    Full Text Available We study a new problem of location-inventory-routing in forward and reverse logistic (LIRP-FRL network design, which simultaneously integrates the location decisions of distribution centers (DCs, the inventory policies of opened DCs, and the vehicle routing decision in serving customers, in which new goods are produced and damaged goods are repaired by a manufacturer and then returned to the market to satisfy customers’ demands as new ones. Our objective is to minimize the total costs of manufacturing and remanufacturing goods, building DCs, shipping goods (new or recovered between the manufacturer and opened DCs, and distributing new or recovered goods to customers and ordering and storage costs of goods. A nonlinear integer programming model is proposed to formulate the LIRP-FRL. A new tabu search (NTS algorithm is developed to achieve near optimal solution of the problem. Numerical experiments on the benchmark instances of a simplified version of the LIRP-FRL, the capacitated location routing problem, and the randomly generated LIRP-FRL instances demonstrate the effectiveness and efficiency of the proposed NTS algorithm in problem resolution.

  7. A capacitated vehicle routing problem with order available time in e-commerce industry

    Science.gov (United States)

    Liu, Ling; Li, Kunpeng; Liu, Zhixue

    2017-03-01

    In this article, a variant of the well-known capacitated vehicle routing problem (CVRP) called the capacitated vehicle routing problem with order available time (CVRPOAT) is considered, which is observed in the operations of the current e-commerce industry. In this problem, the orders are not available for delivery at the beginning of the planning period. CVRPOAT takes all the assumptions of CVRP, except the order available time, which is determined by the precedent order picking and packing stage in the warehouse of the online grocer. The objective is to minimize the sum of vehicle completion times. An efficient tabu search algorithm is presented to tackle the problem. Moreover, a Lagrangian relaxation algorithm is developed to obtain the lower bounds of reasonably sized problems. Based on the test instances derived from benchmark data, the proposed tabu search algorithm is compared with a published related genetic algorithm, as well as the derived lower bounds. Also, the tabu search algorithm is compared with the current operation strategy of the online grocer. Computational results indicate that the gap between the lower bounds and the results of the tabu search algorithm is small and the tabu search algorithm is superior to the genetic algorithm. Moreover, the CVRPOAT formulation together with the tabu search algorithm performs much better than the current operation strategy of the online grocer.

  8. Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

  9. Roadmap for Lean implementation in Indian automotive component manufacturing industry: comparative study of UNIDO Model and ISM Model

    Science.gov (United States)

    Jadhav, J. R.; Mantha, S. S.; Rane, S. B.

    2015-06-01

    The demands for automobiles increased drastically in last two and half decades in India. Many global automobile manufacturers and Tier-1 suppliers have already set up research, development and manufacturing facilities in India. The Indian automotive component industry started implementing Lean practices to fulfill the demand of these customers. United Nations Industrial Development Organization (UNIDO) has taken proactive approach in association with Automotive Component Manufacturers Association of India (ACMA) and the Government of India to assist Indian SMEs in various clusters since 1999 to make them globally competitive. The primary objectives of this research are to study the UNIDO-ACMA Model as well as ISM Model of Lean implementation and validate the ISM Model by comparing with UNIDO-ACMA Model. It also aims at presenting a roadmap for Lean implementation in Indian automotive component industry. This paper is based on secondary data which include the research articles, web articles, doctoral thesis, survey reports and books on automotive industry in the field of Lean, JIT and ISM. ISM Model for Lean practice bundles was developed by authors in consultation with Lean practitioners. The UNIDO-ACMA Model has six stages whereas ISM Model has eight phases for Lean implementation. The ISM-based Lean implementation model is validated through high degree of similarity with UNIDO-ACMA Model. The major contribution of this paper is the proposed ISM Model for sustainable Lean implementation. The ISM-based Lean implementation framework presents greater insight of implementation process at more microlevel as compared to UNIDO-ACMA Model.

  10. Directory of the manufacturers and suppliers for the French wind power industry; Annuaire des fabricants et fournisseurs de l'industrie eolienne 2010-2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-11-15

    With over 5, 660 MW installed in end-2010, France ranks fourth in Europe, behind Germany, Spain and Italy. The wind power industry currently employs almost 11, 000 people in France throughout the value chain. In 2009, the first edition of this directory listed over one hundred companies working in around twenty different areas. Encouraged by these initial positive results, and with the help of ADEME, the French syndicate for renewable energies (SER) asked Capgemini Consulting to undertake a study to identify and raise awareness among French industrials likely to enter into the wind energy market. The French Ministry for Ecology, Energy, Sustainable Development and the Sea, along with the Ministry for the Economy, Finance and Employment, were involved in the work. 400 companies were questioned as part of the study. Over 150 replies testified to the dynamic character of the wind power market in France and overseas, and the opportunities for diversification that it represents for traditional industries like metallurgy, aeronautics, defence and shipyards, etc. The study led to the creation of the initiative Windustry France, which currently groups over 300 companies either active in the French wind power market or set to enter it. Windustry France is a showcase of the industrial know-how that can be used in the wind power industry both onshore and offshore. It includes local set-ups developed around major fields of activity (e.g. car industry, aeronautics, mechanics, etc.) and industrial port zones (Dunkerque, Rouen/Le Havre, Brest, Nantes Saint-Nazaire, Bordeaux, etc.). Several ministries, regional stakeholders and authorities are also involved (local authorities, Regional directorates for industry, research and the environment (DReal) networks and chambers of commerce and industry), all of which contribute to making Windustry France a collective approach to industrial policy. The 2010-2011 edition of the directory of manufacturers and suppliers for the wind power

  11. Environmentally benign silicon solar cell manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Tsuo, Y.S. [National Renewable Energy Lab., Golden, CO (United States); Gee, J.M. [Sandia National Labs., Albuquerque, NM (United States); Menna, P. [National Agency for New Technologies Energy and Environment, Portici (Italy); Strebkov, D.S.; Pinov, A.; Zadde, V. [Intersolarcenter, Moscow (Russian Federation)

    1998-09-01

    The manufacturing of silicon devices--from polysilicon production, crystal growth, ingot slicing, wafer cleaning, device processing, to encapsulation--requires many steps that are energy intensive and use large amounts of water and toxic chemicals. In the past two years, the silicon integrated-circuit (IC) industry has initiated several programs to promote environmentally benign manufacturing, i.e., manufacturing practices that recover, recycle, and reuse materials resources with a minimal consumption of energy. Crystalline-silicon solar photovoltaic (PV) modules, which accounted for 87% of the worldwide module shipments in 1997, are large-area devices with many manufacturing steps similar to those used in the IC industry. Obviously, there are significant opportunities for the PV industry to implement more environmentally benign manufacturing approaches. Such approaches often have the potential for significant cost reduction by reducing energy use and/or the purchase volume of new chemicals and by cutting the amount of used chemicals that must be discarded. This paper will review recent accomplishments of the IC industry initiatives and discuss new processes for environmentally benign silicon solar-cell manufacturing.

  12. Environmental health survey in asbestos cement sheets manufacturing industry.

    Science.gov (United States)

    Ansari, F A; Bihari, V; Rastogi, S K; Ashquin, M; Ahmad, I

    2007-01-01

    About 673 small-scale asbestos mining and milling facilities and 33 large - scale asbestos manufacturing plants, (17 asbestos-cement product manufacturing plants and 16 other than asbestos-cement product plants) are situated in India. The present study reveals the exposure of commercial asbestos (chrysotile) in the occupational as well as ambient air environment of the asbestos-cement (AC) sheets industry using membrane filter method of Bureau of Indian Standards (BIS). The fibre concentrations in 15 samples collected in the occupational environment at ingredient feeding site, sheet-producing site, fibre godown were 0.079, 0.057 and 0.078 f/cc, respectively and in five samples from surrounding ambient air at factory gate resulted fibre concentration of 0.071 f/cc. All the samples have shown fibre concentration lower than the threshold limit values (TLVs) prescribed by BIS. Morphological analysis of samples, further under phase contrast and polarized microscopy indicates the presence of chrysotile asbestos, which acts as carcinogen as well as co-carcinogen. A clinical examination of exposed subjects reveals that there was no case of clubbing, crepitation, ronchi and dyspnea on exertion; however, obstruction and restriction were 10.9 per cent and 25 per cent in exposed subjects, respectively while in control there were 12 per cent and 28 per cent, respectively. The study revealed that chrysotile asbestos is emitted in the occupational as well as ambient environment that may cause adverse health impact.

  13. Using the Communication Methods, Tools and Support During Management of Project Communication in Industrial Manufacturing Enterprises

    Science.gov (United States)

    Samáková, Jana; Babčanová, Dagmar; Hrablikchovanová, Henrieta; Mesárošová, Jana; Šujanová, Jana

    2017-09-01

    Effective communication is the most significant ability for project manager and successful project. However, during the management of projects communication, it is very often forgotten, often overlooked or taken for granted. In the management of projects, it is principally necessary to deal with communication during all project lifecycle. Within the project communication, it is very important to define the main methods, tools, support of communication and frequency of communication; these belong to the most important elements of the communication channel which is very often forgotten. Therefore, the main aim of the paper is to analyse the utilisation of the communication channel: communication methods, communication tools, communication frequency and to support project communication in industrial manufacturing enterprises in Slovakia. Based on the research, we can conclude that communication channel is not adequately elaborated in international methodologies and standards of project management as well as in industrial manufacturing enterprises. These facts are very negative, conclusion and it is therefore necessary to deal with the problem.

  14. Pretreatment of Real Wastewater from the Chocolate Manufacturing Industry through an Integrated Process of Electrocoagulation and Sand Filtration

    OpenAIRE

    García-Morales, Marco A.; Juárez, Julio César González; Martínez-Gallegos, Sonia; Roa-Morales, Gabriela; Peralta, Ever; del Campo López, Eduardo Martin; Barrera-Díaz, Carlos; Miranda, Verónica Martínez; Blancas, Teresa Torres

    2018-01-01

    The purpose of this study was to evaluate the efficiency of removal of suspended solids in terms of turbidity, color, and chemical oxygen demand (COD) when integrating the electrocoagulation process using aluminum sacrificial anodes and the sand filtration process as a pretreatment of wastewater from the chocolate manufacturing plant in Toluca, México. Wastewater from the chocolate manufacturing industry used in this study is classified as nontoxic, but is characterized as having a high conte...

  15. Design of Intelligent Manufacturing Big Data Cloud Service Platform

    Directory of Open Access Journals (Sweden)

    Cai Danlin

    2018-01-01

    Full Text Available With the coming of the intelligent manufacturing, the technology and application of industrial big data will be popular in the future. The productivity, competitiveness and innovation of the manufacturing industries will be improved through the integrated innovation of big data technology and industries. Besides, products, production process, management, services, new form and new models will be more intellectualized. They will support the transformation and upgrading of manufacturing industry and the construction of an open, shared and collaborative ecological environment for intelligent manufacturing industry.

  16. Simulation and gaming as a support tool for lean manufacturing systems - a case example from industry

    NARCIS (Netherlands)

    van der Zee, DJ; Slomp, J; Kuhl, M.E.; Steiger, N.M.; Armstrong, F.B.; Joines, J.

    2005-01-01

    In this article we illustrate how simulation and gaming can be used to support lean manufacturing systems. More in particular we study a case example from industry - a manual assembly line for mail-inserting systems - for which we have developed a simulation game. This paper focuses on the

  17. Route planning of raw materials transportation in the industrial hub of Mariupol city

    Directory of Open Access Journals (Sweden)

    Юлія Вікторівна Булгакова

    2017-07-01

    Full Text Available The multi-modal freight transportation routes planning problem is viewed in this paper. The case study of iron ore deliveries to the metallurgical enterprises of Mariupol from Kryvyi Rih is presented. Based on the analysis of Ukrainian railroads and sea ports infrastructures six possible routes of multi-modal iron ore transportation are built. The paper presents a short review of route planning problem in multi-modal freight transportations, which are use sea and land parts together, regarding decision support methods of routes evaluation and selection. The lack of studies dedicated to fuzzy logic theory application for solving the stated problems is identified. The relevance of fuzzy set application to the route planning problem is proved. Taking into account the peculiarities of iron ore transportations technology, the following criterions of routes evaluation are chosen: «transportation costs», «delivery times», «transportation risks». The model of multicriterion decision-making of routes evaluation and the optimal route selection, based on fuzzy logic theory, is developed. Criteria of routes evaluation are set by three terms Gaussian and sigmoidal membership functions. The approach to each function construction is practice-based and executed together with iron ore supply chain manager. The model is created in MATLAB Fuzzy Logic Tool Box environment using Mamdani’s fuzzy inference

  18. FACTORS INFLUENCING ORGANIZATIONAL STRUCTURE IN THE FOOD MANUFACTURING, CHEMICAL, AGRICULTURAL WHOLESALING AND BIOTECHNOLOGY INDUSTRIES

    OpenAIRE

    Maude Roucan-Kane

    2009-01-01

    The objective of this study is to identify factors determining a business investment strategy (i.e., the choice of investment commitment and form of organizational structure) in the food manufacturing, chemical, agricultural wholesaling and biotechnology industries. Propositions regarding strategic alliance theories are tested on over 400 inter-firm collaborative agreements using secondary data from major US and European companies for the 1994-97 period. Results suggest that transactions with...

  19. Approaches to raw sugar quality improvement as a route to sustaining a reliable supply of purified industrial sugar feedstocks

    Science.gov (United States)

    Energy costs in the sugar industry are outstripping costs of manufacture, particularly in refineries. This, as well as increasing transportation costs and the need to meet manufacturers’ tight specifications, has increased the demand for a sustainable supply of purified, raw sugar. Agricultural com...

  20. Manufacturing technology in the Danish pig slaughter industry.

    Science.gov (United States)

    Hinrichsen, Lars

    2010-02-01

    The Danish pig meat industry is very export oriented. Ninety per cent of the production of the big cooperative slaughterhouses is exported to more than 100 countries all over the world. This poses a requirement for the industry to be globally competitive in the sense of quality, product safety and--of course--price. A big challenge for the industry is therefore to maintain sufficient low unit costs in spite of the high factor costs of Denmark. In particular the high labour costs must be accompanied by correspondingly high labour productivity. And, it should be emphasized, this high labour productivity must be achieved without compromising the concern for good working conditions of the employees in the manufacturing. Technology is one of the means to achieve this combination of good working conditions and high labour productivity. One of the most important benefits from automation is the improved working environment. Pig slaughtering, cutting and boning is traditionally very labour intensive and requires hard and repetitive work. For many people a job in a slaughterhouse is therefore not their first choice. This situation can be changed by automation, which will not only reduce arduous and repetitive work but in addition will introduce more motivating jobs in terms of planning, supervision and control of the new technology. Automation will also improve the hygiene and thereby the food safety. This applies in particular to the clean slaughter line where cross contamination between carcasses is reduced because of less manual handling and because the tools in the machines can be sterilised more effectively between each carcass. Automated processes are more accurate and repeatable than manual work. For some processes, in particular in cutting and boning, this will enhance the product yield. New technology can also improve the animal welfare. The group-stunning system and mechanised lairage systems are examples of that. Improved animal welfare has an ethical value in

  1. Using microwave Doppler radar in automated manufacturing applications

    Science.gov (United States)

    Smith, Gregory C.

    Since the beginning of the Industrial Revolution, manufacturers worldwide have used automation to improve productivity, gain market share, and meet growing or changing consumer demand for manufactured products. To stimulate further industrial productivity, manufacturers need more advanced automation technologies: "smart" part handling systems, automated assembly machines, CNC machine tools, and industrial robots that use new sensor technologies, advanced control systems, and intelligent decision-making algorithms to "see," "hear," "feel," and "think" at the levels needed to handle complex manufacturing tasks without human intervention. The investigator's dissertation offers three methods that could help make "smart" CNC machine tools and industrial robots possible: (1) A method for detecting acoustic emission using a microwave Doppler radar detector, (2) A method for detecting tool wear on a CNC lathe using a Doppler radar detector, and (3) An online non-contact method for detecting industrial robot position errors using a microwave Doppler radar motion detector. The dissertation studies indicate that microwave Doppler radar could be quite useful in automated manufacturing applications. In particular, the methods developed may help solve two difficult problems that hinder further progress in automating manufacturing processes: (1) Automating metal-cutting operations on CNC machine tools by providing a reliable non-contact method for detecting tool wear, and (2) Fully automating robotic manufacturing tasks by providing a reliable low-cost non-contact method for detecting on-line position errors. In addition, the studies offer a general non-contact method for detecting acoustic emission that may be useful in many other manufacturing and non-manufacturing areas, as well (e.g., monitoring and nondestructively testing structures, materials, manufacturing processes, and devices). By advancing the state of the art in manufacturing automation, the studies may help

  2. Manufacturing Capacity Utilization and Industrial Development in ...

    African Journals Online (AJOL)

    FIRST LADY

    utilization in the late 1970s was as high as 78.70 percent and nosedived to as low as 43.80 percent in the 1980s. Between ... through a regime of high inflation rate which makes domestic manufacturers and domestic market ... However, inflation and loans and advances to manufacturing were found to have negative effect.

  3. Lean Manufacturing Auto Cluster at Chennai

    Science.gov (United States)

    Bhaskaran, E.

    2012-10-01

    Due the presence of lot of automotive Industry, Chennai is known as Detroit of India, that producing over 40 % of the Indian vehicle and components. Lean manufacturing concepts have been widely recognized as an important tool in improving the competitiveness of industries. This is a continuous process involving everyone, starting from management to the shop floor. Automotive Component Industries (ACIs) in Ambattur Industrial Estate, Chennai has formed special purpose vehicle (SPV) society namely Ambattur Industrial Estate Manufacturers Association (AIEMA) Technology Centre (ATC) lean manufacturing cluster (ATC-LMC) during July 2010 under lean manufacturing competitiveness scheme, that comes under National Manufacturing Competitiveness Programme of Government of India. The Tripartite Agreement is taken place between National Productivity Council, consultants and cluster (ATC-LMC). The objective is to conduct diagnostic study, study on training and application of various lean manufacturing techniques and auditing in ten ACIs. The methodology adopted is collection of primary data/details from ten ACIs. In the first phase, diagnostic study is done and the areas for improvement in each of the cluster member companies are identified. In the second phase, training programs and implementation is done on 5S and other areas. In the third phase auditing is done and found that the lean manufacturing techniques implementation in ATC-LMC is sustainable and successful in every cluster companies, which will not only enhance competitiveness but also decrease cost, time and increase productivity. The technical efficiency of LMC companies also increases significantly.

  4. Recycling industrial waste in brick manufacture. Part 1

    Directory of Open Access Journals (Sweden)

    Andreola, F.

    2005-12-01

    Full Text Available The ongoing accumulation of industrial waste speaks to the need to seek cost-effective disposal methods. Brick manufacture would appear to be particularly promising in this regard. The present study analyzes the possibility of recycling the sludge generated in porcelain tile polishing, as well as coal, steel and municipal incinerator ash to make a special type of facing brick whose properties readily accommodate a full analysis of all the problems deriving from the incorporation of residue in its manufacture. Physical-chemical, mechanical and structural analyses were performed on bricks made with varying percentages of the different types of waste considered. This first paper reports the results of the physical arid technological characterization of the products; the second part of the research will address their chemical, mechanical and structural properties.

    El continuo aumento de la cantidad de residuos (desechos que se generan en los procesos industriales induce a buscar nuevos métodos alternativos a la disposición final que sean altamente eficientes y a bajo costo. La industria manufac turera de ladrillos resulta muy prometedora desde este punto de vista. En este trabajo ha sido investigada la posibilidad de usar distintos residuos industriales, entre ellos barros de pulido del gres porcelánico. cenizas de carbón, cenizas de acerías y de incinerador municipal para la fabricación de ladrillos de exteriores. Fueron analizados los problemas que podrían derivar al introducir estos residuos en la pasta. En particular, en esta primera parte del trabajo se muestran los resultados derivados de la introducción de los residuos considerados, en distintos porcentajes, sobre las propiedades físicas y tecnológicas del producto final. En la segunda parte se desarrollarán los efectos causados sobre las propiedades químicas, mecánicas y microestructurales.

  5. Possibilities for mixed mode chip manufacturing in EUROPRACTICE

    Science.gov (United States)

    Das, C.

    1997-02-01

    EUROPRACTICE is an EC initiative under the ESPRIT programme which aims to stimulate the wider exploitation of state-of-the-art microelectronics technologies by European industry and to enhance European industrial competitiveness in the global market-place. Through EUROPRACTICE, the EC has created a range of Basic Services that offer users a cost-effective and flexible means of accessing three main microelectronics-based technologies: Application Specific Integrated Circuit (ASICs), Multi-Chip Modules (MCMs) and Microsystems. EUROPRACTICE Basic Services reduce the cost and risk for companies wishing to begin using these technologies. EUROPRACTICE offers a fully supported, low cost route for companies to design and fabricate ASICs for their individual applications. Low cost is achieved by consolidating designs from many users onto a single semiconductor wafer (MPW: Multi Project Wafer). The EUROPRACTICE IC Manufacturing Service (ICMS) offers a broad range of fabrication technologies including CMOS, BiCMOS and GaAs. The Service extends from enabling users to produce prototype ASICs for testing and evaluation, through to low-volume production runs.

  6. Manufacturing Growth with Social Deficits. Environmental and Labour Issues in the High Tech Industry of Penang, Malaysia

    DEFF Research Database (Denmark)

    Wangel, Arne

    2001-01-01

    The economic downturn in 1997 was less severe in Malaysia compared to other countries in the region. However, as the manufacturing sector, in particular the high tech industries, lacks a strong national technological base and depends on exports, structural problems remain. The first part of the p......The economic downturn in 1997 was less severe in Malaysia compared to other countries in the region. However, as the manufacturing sector, in particular the high tech industries, lacks a strong national technological base and depends on exports, structural problems remain. The first part...... of the paper briefly provides key indicators of the economic recession. The second part describes the origin and structure of the high tech sector in Malaysia. Impressive growth has been achieved only as accompanied by a deepening dependency on trends in the global computer industry. The absence of innovative...... capacity makes it difficult to escape production segments, in which labour cost remains a key parameter. Thus, the competitive position of Malaysia is unstable and may erode. In the third part, the pattern of interests of the major stakeholders: authorities, corporate managers, workers, trade unions...

  7. Industrial garnet

    Science.gov (United States)

    Olson, D.W.

    2000-01-01

    The state of the global industrial garnet industry in 1999 is discussed. Industrial garnet mined in the U.S., which accounts for approximately one-third of the world's total, is usually a solid-solution of almandine and pyrope. The U.S. is the largest consumer of industrial garnet, using an estimated 47,800 st in 1999 as an abrasive and as a filtration medium in the petroleum industry, filtration plants, aircraft and motor vehicle manufacture, shipbuilding, wood furniture finishing operations, electronic component manufacture, ceramics manufacture, and glass production. Prices for crude concentrates ranged from approximately $50 to $110/st and refined garnet from $50 to $215/st in 1999, depending on type, source, quantity purchased, quality, and application.

  8. Manufacturing consumption of energy 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

  9. Industrial Engineering

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally).......Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally)....

  10. Statistical and Computational Techniques in Manufacturing

    CERN Document Server

    2012-01-01

    In recent years, interest in developing statistical and computational techniques for applied manufacturing engineering has been increased. Today, due to the great complexity of manufacturing engineering and the high number of parameters used, conventional approaches are no longer sufficient. Therefore, in manufacturing, statistical and computational techniques have achieved several applications, namely, modelling and simulation manufacturing processes, optimization manufacturing parameters, monitoring and control, computer-aided process planning, etc. The present book aims to provide recent information on statistical and computational techniques applied in manufacturing engineering. The content is suitable for final undergraduate engineering courses or as a subject on manufacturing at the postgraduate level. This book serves as a useful reference for academics, statistical and computational science researchers, mechanical, manufacturing and industrial engineers, and professionals in industries related to manu...

  11. JAIF's 23rd nuclear industry survey: strengthening industrial foundations under low economic growth

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    Each year since the beginning of nuclear development in Japan, Japan Atomic Industrial Forum has conducted the survey of the nuclear-related aspects in mining and manufacturing industries, electric utilities, trading firms, etc., regarding their expenditures, sales and personnel. The results of the 23rd survey for fiscal 1981 (April, 1981, to March, 1982,) are described. The salient points in the year, as compared with fiscal 1980, are as follows: (trend in expenditures) nuclear-related expenditures exceeded yen2 trillion, up 12 %; the operation and maintenance costs of electric utilities varied, but overall, up 25 %; the nuclear-related expenditures of mining and manufacturing industries were up 34 %; (trend in sales) the new record in mining and manufacturing industries - the sales topped yen1 trillion; the sales of reactor equipments rose by 59 %; the sales by mining and manufacturing industries to electric utilities up 42 %; the nuclear-related exports of mining and manufacturing industries grew by 13 %; the revenues and sales exceeded the expenditures in mining and manufacturing industries. (Mori, K.)

  12. Numerical and experimental study of Ti6Al4V components manufactured using powder bed fusion additive manufacturing

    OpenAIRE

    Zielinski, J.; Mindt, H.-W.; Düchting, J.; Schleifenbaum, J.H.; Megahed, M.

    2017-01-01

    Powder bed fusion additive manufacturing of titanium alloys is an interesting manufacturing route for many applications requiring high material strength combined with geometric complexity. Managing powder bed fusion challenges, including porosity, surface finish, distortions and residual stresses of as-built material, is the key to bringing the advantages of this process to production main stream. This paper discusses the application of experimental and numerical analysis towards optimizing t...

  13. The theory of constraints applied in a manufacture CAD-CAM system in the industry Metalworking-plastic

    Directory of Open Access Journals (Sweden)

    Luis Juiña

    2017-06-01

    Full Text Available In the following project, the theory of constraints was applied in order to implement a manufacture CAD-CAM system into the metal mechanic industry processes of polymers injection and blown of polymers. The research showed that the manufacture of the mold with the engraving took 223,17 hours. In the workflow for the manufacture of the mold, a restriction was found in the outsource service of CNC. It took 120 hours of the whole process and represent the 51,47 % the total time of tooling manufacturing. There is also a constraint found in the design time. It was 60 hours that corresponds to 26,88 % of the overall time. In order to reduce the time, a modern system of design in 3D and CAM was established to improve the model process of design and manufacture. A simulation by computational resource was applied to the plastic. The design was changed from 2D to 3D. The implementation was focused in the design. A software was installed to improve the speed of modeling methods with reliable information. In the manufacture of molds, a new CNC machine was acquired with three simultaneous axes to eliminate the outsource service. By acquiring the design system, the working time was diminished in 79% and regarding to the CNC process, the working time was improved in 88%.

  14. ISO in the Construction and Manufacturing Companies: A Case Study from the Construction Industry of Hyderabad and Karachi, Pakistan

    Directory of Open Access Journals (Sweden)

    Nafees Ahmed Memon

    2011-04-01

    Full Text Available Construction industry plays very important role in development of any country. The development of construction industry depends to a larger extent on quality of construction productions and projects. Quality of construction productions and projects is linked with the implementation of QMS (Quality Management System in construction organizations. ISO certification is one of the QMS which has been adopted in manufacturing and construction industry at the global level. The construction companies of developing countries have reaped many advantages from the effective implementation of ISO standards. The rate of adoption of ISO standards has remained slow in the construction sector of some developing countries like Pakistan. This paper presents the literature review of ISO in global construction industry. It highlights the advantages, disadvantages and barriers faced by construction companies in the implementation of ISO standards. This study also investigates the level of adoption of ISO standards in construction and manufacturing companies of Pakistan through a questionnaire survey. It presents the comparison of ISO standards\\\\\\' adoption in both construction and manufacturing sectors. The paper puts forward some suggestions and recommendation for the better adoption and improvement of ISO implementation in the construction sector of Pakistan. This study emphasizes that construction companies of Pakistan should learn from the benefits reaped by the construction companies of developed countries and take appropriate measures for implementing ISO standards. It also suggests that public sector clients should make it obligatory for the contractors and consultants to have ISO certification before awarding the works in order to enhance the the adoption of ISO standards in construction sector.

  15. Towards the re-industrialization of Europe a concept for manufacturing for 2030

    CERN Document Server

    Westkämper, Engelbert

    2014-01-01

    Not only are European industries shrinking and experiencing diminishment of their capability to add value, but Europe has lost more than a third of its GDP, which had been primarily based on manufacturing, and it suffers the consequences in high unemployment and weakened states finance. This book is intended as a significant contribution to the on-going European discussions after the economic crisis and the economic problems in many regions. It is meant to enrich actual political dialogues for overcoming the crises by activating new potentials of high added value. As such, it seeks to provide the necessary orientation for enacting fundamental changes of business models and factory capabilities in order to meet the challenges of the global economy and minimizing environmental impacts. It also opens perspectives for enterprise strategies and for further research topics. Concrete recommendations are made for fields of action and future development towards achieving a sustainable industrial sector in Europe. ‘T...

  16. Estimates of emergency operating capacity in US manufacturing and nonmanufacturing industries - Volume 1: Concepts and Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, D.B. (Pacific Northwest Lab., Richland, WA (USA)); Serot, D.E. (D/E/S Research, Richland, WA (USA)); Kellogg, M.A. (ERCE, Inc., Portland, OR (USA))

    1991-03-01

    Development of integrated mobilization preparedness policies requires planning estimates of available productive capacity during national emergency conditions. Such estimates must be developed in a manner to allow evaluation of current trends in capacity and the consideration of uncertainties in various data inputs and in engineering assumptions. This study developed estimates of emergency operating capacity (EOC) for 446 manufacturing industries at the 4-digit Standard Industrial Classification (SIC) level of aggregation and for 24 key nonmanufacturing sectors. This volume lays out the general concepts and methods used to develop the emergency operating estimates. The historical analysis of capacity extends from 1974 through 1986. Some nonmanufacturing industries are included. In addition to mining and utilities, key industries in transportation, communication, and services were analyzed. Physical capacity and efficiency of production were measured. 3 refs., 2 figs., 12 tabs. (JF)

  17. Factors and Drivers Effecting the Decision of Using Off-Site Manufacturing (OSM Systems in House Building Industry

    Directory of Open Access Journals (Sweden)

    Hussein Elnaas

    2014-01-01

    Full Text Available Much has been written on Off-site Manufacturing (OSM in construction, particularly regarding the perceived benefits and barriers to implementation. However, there seems to be a wide misunderstanding of the state of OSM associated with the concept of decision by many of those involved in decision making process within the house building industry. This has led to a demand for guidance’s on decision making process for construction project leaders particularly at early project stages. Choosing a construction method for a project will require an optimum decision strategy which involves careful understanding, measurement and evaluation of a number of decision factors that can have the most influence on successful decision action. This paper, therefore, aims to identify the key decision factors to be considered at evaluation stage when choosing to use Off-Site Manufacturing (OSM as a construction strategy in house building projects. This will reveal the key drivers for change in the industry towards the use of OSM in house building.

  18. Selection of Technology in Global Manufacturing Industries

    DEFF Research Database (Denmark)

    Bruun, Peter

    1997-01-01

    not work well. The host country's business and cultural environment must be taken into account in designing a production system which requires attention to the management elements of technology transfer. This paper presents a model for transfer of manufacturing technology to a foreign site based......Transferring a manufacturing system to another country has proven to be problematic for most multinational firms. Selection of the appropriate production process and technology is a critical decision as transplantation of an existing system from another country without adaptation usually does...... on a sociotechnical system approach. It views the decisions for selecting and implementing a production system as a five stage process. The first step is determining the strategic goals of the foreign plant followed by selection of the production process and manufacturing system types. The last stages involve...

  19. Design, Manufacturing and Integration of LHC Cryostat Components an Example of Collaboration between CERN and Industry

    CERN Document Server

    Slits, Ivo; Canetti, Marco; Colombet, Thierry; Gangini, Fabrizio; Parma, Vittorio; Tock, Jean-Philippe

    2006-01-01

    The components for the LHC cryostats and interconnections are supplied by European industry. The manufacturing, assembly and testing of these components in accordance with CERN technical specifications require a close collaboration and dedicated approach from the suppliers. This paper presents the different phases of design, manufacturing, testing and integration of four LHC cryostat components supplied by RIAL Vacuum (Parma, Italy), including 112 Insulation Vacuum Barriers (IVB), 482 Cold-mass Extension Tubes (CET), 121 cryostat vacuum vessel Jumper Elbows (JE) and 10800 Interconnection Sleeves (IS). The Quality Assurance Plan, which the four projects have in common, is outlined. The components are all leak-tight thin stainless steel assemblies (<10-8 mbar l/s), most of them operating at cryogenic temperature (2 K), however each having specific requirements. The particularities of each component are presented with respect to manufacturing, assembly and testing. These components are being integrated ...

  20. A model to enable indirect manufacturing options transactions between organisations: An application to the ceramic industry

    International Nuclear Information System (INIS)

    Rodriguez-Rodriguez, R.; Gomez-Gasquet, P.; Oltra-Badenes, R. F.

    2014-01-01

    In the current competitive contexts, it is widely accepted and proved that inter-enterprise collaboration lead in many occasions to better results. The Spanish ceramic industry must improve, dropping its manufacturing costs in order to be able to compete with low cost products coming from Asia. In this sense, this work presents the main results obtained from applying an innovative model, which facilitates the transfer of manufacturing options between two ceramic enterprises that share a common supplier in the scenario where one of them needs more manufacturing capacity than the one booked according to its demand forecast and the another need less. Then, some decisional mechanisms are applied, which output the values for certain parameters in order to augment the benefit of all the three participants. With the application of this model better organisational results both economic and of service level are achieved. (Author)

  1. Micro manufacturing techniques and applications

    CERN Document Server

    Du, Ruxu; Li, Zifu

    2013-01-01

    Micro/meso-scale manufacturing has been developed in research fields of machining, forming, materials and others, but its potential to industries are yet to be fully realized. The theme of the current volume was to build a bridge joining academic research and industrial needs in micro manufacturing. Among the 12 papers selected for publication are three keynote addresses onmicro and desktop factories for micro/meso-scale manufacturing applicationsand future visions, tissue cutting mechanics and applications for needlecore biopsy and guidance, and micro-texturing onto amorphous carbonmaterials

  2. Greenhouse gas options, policy and measures for the Canadian Transportation Equipment Manufacturing Industry - Final report

    International Nuclear Information System (INIS)

    2000-02-01

    This report summarizes and analyses the work that have been carried out by the Transportation Equipment Manufacturing Sector (TEMS) Working Group of the National Climate Change Industry Table over the last 14 months, and presents the Group's view of appropriate policies for greenhouse gas emission reduction in Canada. To develop its approach, the Working Group conducted five separate studies which are included in this report as annexes. Annex A is a Foundation Paper, which provides an overview of the sector's performance vis-a-vis energy use and greenhouse gas production. Annex B analyzes the competitive position of the industry by reviewing growth trends in each of the industry sub-sectors and the key factors in maintaining and enhancing the sector's international competitive position. Annex C is a technology assessment. It provides an overview of the uptake of energy saving technology in the sector. Annex D provides a facility level analysis focusing on energy use in the automotive parts manufacturing sector. Annex E is a review of American policies on climate change, summarizing the approach currently being taken towards greenhouse gas emission reduction in the United States. Some of the key findings of this report are: (1) business-as-usual emissions will greatly exceed the implicit Kyoto target of six per cent reduction from 1990 levels, (2) relatively few opportunities exist for major emissions reductions through the use of existing technology, (3) sector-specific policies appear to be ill-advised, but cross-cutting policies provide good opportunities for the transportation equipment manufacturing sector to do its part in helping Canada meeting its Kyoto commitment. The report recommends investigation of barriers to adoption of new technologies and examination of market imperfections, promotion of cogeneration where it makes economic sense, and consideration of the use of flexible instruments such as carbon taxes and tradable emission permits. Overall, the

  3. #%Applications of artificial intelligence in intelligent manufacturing: a review

    Institute of Scientific and Technical Information of China (English)

    #

    2017-01-01

    #%Based on research into the applications of artificial intelligence (AI) technology in the manufacturing industry in recent years, we analyze the rapid development of core technologies in the new era of 'Internet plus AI', which is triggering a great change in the models, means, and ecosystems of the manufacturing industry, as well as in the development of AI. We then propose new models, means, and forms of intelligent manufacturing, intelligent manufacturing system architecture, and intelligent man-ufacturing technology system, based on the integration of AI technology with information communications, manufacturing, and related product technology. Moreover, from the perspectives of intelligent manufacturing application technology, industry, and application demonstration, the current development in intelligent manufacturing is discussed. Finally, suggestions for the appli-cation of AI in intelligent manufacturing in China are presented.

  4. Mechanical properties of AZ31 alloy processed by a green metallurgy route

    International Nuclear Information System (INIS)

    D'Enrico, F.; Garces, G.; Hofer, M.; Kim, S. K.; Perez, P.; Cabeza, S.; Adeva, P.

    2013-01-01

    Recently it has been proved that molding of defect-free components of various commercial alloys of magnesium can be carried out successfully when small amounts of CaO are added to the melt, making unnecessary the use of SF 6 coverage. In the case of AZ alloys, this process also remarkably improves their mechanical properties not only by the greater cleaning of alloys but also by the formation of CaAl 2 phase. This work, part of the Green project Metallurgy (http://www.green-metallurgy.eu) funded by the European Union (LIFE+2009), studies the influence of different CaO additions on the microstructure and mechanical properties of AZ31 Eco-Mg alloy. The alloy was processed by a conventional route involving extrusion of as-cast rods as well as by a powder metallurgy route (PM) using chips as starting material. The objective was to analyze the viability of recycling machining chips to manufacture components for the automobile industry and transportation in general, because of its low cost and environmental impact. It has been demonstrated that alloys processed from chips exhibit the highest tensile stress values, close to 320 MPa. (Author)

  5. Manufacturing footprint optimisation: a necessity for manufacturing network in changing business environment

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2010-01-01

    Facing the unpredictable financial crisis, optimising the footprint can be the biggest and most important transformation a manufacturer can undertake. In order to realise the optimisation, fundamental understanding on manufacturing footprint is required. Different elements of manufacturing...... footprint have been investigated independently in the existing literature. In this paper, for the purpose of relationship exploration between different elements, manufacturing footprints of three industrial companies are traced historically. Based on them, four reasons for the transformation...

  6. An inventory location routing model with environmental considerations

    Directory of Open Access Journals (Sweden)

    Lerhlaly Sanaa

    2017-01-01

    Full Text Available In this work we consider an integrated Inventory Location Routing problem ILRP. The objective is to select depots to open, the routes to perform distribution from the capacitated depots to the clients by a homogeneous fleet of vehicles and over a multi-period planning horizon. To solve the problem, an exact model is designed in order to minimize the total cost (location, routing and inventory and the routing CO2 emissions, while respecting transport and storage constraints for a hazardous material. We have also studied an industrial real case to illustrate the problem.

  7. Spring 2007. Industry Study. Manufacturing Industry

    Science.gov (United States)

    2007-01-01

    their success. Each company advertised the world-class capabilities of their product, not its price. By contrast, a struggling company we visited in...business disruptions lurking within the Trojan Horse we have nestled in the US industrial base. It is important to note that a catastrophic disaster from

  8. Air Pollution and 'Dirty' Industries. How and Why Does the Composition of Manufacturing Output Change with Economic Development?

    International Nuclear Information System (INIS)

    Cole, M.A.

    2000-01-01

    This paper examines the impact on air pollution of changes in the composition of manufacturing output in developed and developing countries. Pollution emissions from manufacturing output are estimated in a manner which holds constant the effect of technology and regulations allowing the impact of compositional changes alone on pollution to be estimated. The paper has three main findings; (1) the inverted-U estimated between per capita income and the pollution intensity of GDP arises due to both the composition of manufacturing becoming cleaner and the share of manufacturing output in GDP falling. Compositional changes alone are not responsible for the inverted-U between per capita income and per capita emissions; (2) changes to the composition of manufacturing output are consistent with the pollution haven hypothesis, however there is clear evidence that rising per capita incomes are associated with a failing income elasticity of demand for 'dirty' products. This fact may explain the compositional changes that occur with development; (3) in addition to the income elasticity effect, the analysis suggests that land prices and to a lesser extent the prices of labour and capital, determine the proportion of dirty industry within a country's manufacturing sector. 27 refs

  9. Accelerating Industrial Adoption of Metal Additive Manufacturing Technology

    Science.gov (United States)

    Vartanian, Kenneth; McDonald, Tom

    2016-03-01

    While metal additive manufacturing (AM) technology has clear benefits, there are still factors preventing its adoption by industry. These factors include the high cost of metal AM systems, the difficulty for machinists to learn and operate metal AM machines, the long approval process for part qualification/certification, and the need for better process controls; however, the high AM system cost is the main barrier deterring adoption. In this paper, we will discuss an America Makes-funded program to reduce AM system cost by combining metal AM technology with conventional computerized numerical controlled (CNC) machine tools. Information will be provided on how an Optomec-led team retrofitted a legacy CNC vertical mill with laser engineered net shaping (LENS®—LENS is a registered trademark of Sandia National Labs) AM technology, dramatically lowering deployment cost. The upgraded system, dubbed LENS Hybrid Vertical Mill, enables metal additive and subtractive operations to be performed on the same machine tool and even on the same part. Information on the LENS Hybrid system architecture, learnings from initial system deployment and continuing development work will also be provided to help guide further development activities within the materials community.

  10. Investigation of supply chain integration performance in export-focused manufacturing industry in China and an assessment of a local gymnastic products manufacturer.

    OpenAIRE

    Zhang, Chong

    2008-01-01

    The purpose of this dissertation is try to find out the gap between exported-focused Chinese manufacturing industry practice with world-class supply chain integration performance in developed countries. This is helpful to reveal and explain difficulties and obstacles that limit local suppliers to pursue better supply chain performance. A case study is used to analyze performance of a specific Chinese producer�¢����s supply chain and operations management. The results found out that wide...

  11. Importance of Advanced Planning of Manufacturing for Nuclear Industry

    Directory of Open Access Journals (Sweden)

    Shykinov Nick

    2016-06-01

    Full Text Available In the context of energy demands by growing economies, climate changes, fossil fuel pricing volatility, and improved safety and performance of nuclear power plants, many countries express interest in expanding or acquiring nuclear power capacity. In the light of the increased interest in expanding nuclear power the supply chain for nuclear power projects has received more attention in recent years. The importance of the advanced planning of procurement and manufacturing of components of nuclear facilities is critical for these projects. Many of these components are often referred to as long-lead items. They may be equipment, products and systems that are identified to have a delivery time long enough to affect directly the overall timing of a project. In order to avoid negatively affecting the project schedule, these items may need to be sourced out or manufactured years before the beginning of the project. For nuclear facilities, long-lead items include physical components such as large pressure vessels, instrumentation and controls. They may also mean programs and management systems important to the safety of the facility. Authorized nuclear operator training, site evaluation programs, and procurement are some of the examples. The nuclear power industry must often meet very demanding construction and commissioning timelines, and proper advanced planning of the long-lead items helps manage risks to project completion time. For nuclear components there are regulatory and licensing considerations that need to be considered. A national nuclear regulator must be involved early to ensure the components will meet the national legal regulatory requirements. This paper will discuss timing considerations to address the regulatory compliance of nuclear long-lead items.

  12. Porcelain tiles by the dry route

    International Nuclear Information System (INIS)

    Melchiades, F. G.; Daros, M. T.; Boschi, A. O.

    2010-01-01

    In Brazil, the second largest tile producer of the world, at present, 70% of the tiles are produced by the dry route. One of the main reasons that lead to this development is the fact that the dry route uses approximately 30% less thermal energy them the traditional wet route. The increasing world concern with the environment and the recognition of the central role played by the water also has pointed towards privileging dry processes. In this context the objective of the present work is to study the feasibility of producing high quality porcelain tiles by the dry route. A brief comparison of the dry and wet route, in standard conditions industrially used today to produce tiles that are not porcelain tiles, shows that there are two major differences: the particle sizes obtained by the wet route are usually considerably finer and the capability of mixing the different minerals, the intimacy of the mixture, is also usually better in the wet route. The present work studied the relative importance of these differences and looked for raw materials and operational conditions that would result in better performance and glazed porcelain tiles of good quality. (Author) 7 refs.

  13. Research on the optimization of vehicle distribution routes in logistics enterprises

    Science.gov (United States)

    Fan, Zhigou; Ma, Mengkun

    2018-01-01

    With the rapid development of modern logistics, the vehicle routing problem has become one of the urgent problems in the logistics industry. The rationality of distribution route planning directly affects the efficiency and quality of logistics distribution. This paper first introduces the definition of logistics distribution and the three methods of optimizing the distribution routes, and then analyzes the current vehicle distribution route by using a representative example, finally puts forward the optimization schemes of logistics distribution route.

  14. User habits and multimodal route planning

    Directory of Open Access Journals (Sweden)

    Géza Katona

    2017-10-01

    Full Text Available The results of route planning researches are monitored by logistic and automotive industries. The economic aspects of the cost saving are in the focus of the attention. An optimal route could cause time or fuel savings. An effective driving or an optimal route is a good basis to achieve an economical aim. Moreover the spread of new automotive solutions especially in case of electric cars the optimisation has particular significance regarding the limited battery storage. Additionally the autonomous car development could not be neglected. As a result the society could expect safer roads, better space usage and effective resource management. Nevertheless the requirements of users are extremely diverse, which is not negligible. Supporting these aims, in this paper the connection between the multimodal route planning and the user requirements are investigated. The examination is focused to a sensitivity analysis and a survey to evaluate the data and support the settings of a user habit effect to the final route.

  15. Determination of an Optimal Trunk Sewer-line Route for Kikuyu ...

    African Journals Online (AJOL)

    The proposed route utilises the existing road reserves, which help in minimising the costs ... and industries and conveys it using sewer pipes to a treatment works where it is treated and ..... Automating Utility Route Design and Planning through.

  16. Make or buy decisions in and levels of logistics outsourcing: an empirical analysis in the food manufacturing industry

    NARCIS (Netherlands)

    Hsin-I Hsiao, L.; Kemp, R.G.M.; Vorst, van der J.G.A.J.; Omta, S.W.F.

    2009-01-01

    The objective of this paper is to study the determinants of outsourcing of different levels of logistics activities in the food manufacturing industry. In our research, four different levels of logistics activities were examined: (1st level) transportation, (2nd level) packaging, (3rd level)

  17. A Taxonomy of Manufacturing Strategies

    OpenAIRE

    Jeffrey G. Miller; Aleda V. Roth

    1994-01-01

    This paper describes the development and analysis of a numerical taxonomy of manufacturing strategies. The taxonomy was developed with standard methods of cluster analysis, and is based on the relative importance attached to eleven competitive capabilities defining the manufacturing task of 164 large American manufacturing business units. Three distinct clusters of manufacturing strategy groups were observed. Though there is an industry effect, all three manufacturing strategy types are obser...

  18. Deciphering the route to cyclic monoterpenes in Chrysomelina leaf beetles: source of new biocatalysts for industrial application?

    Science.gov (United States)

    Burse, Antje; Boland, Wilhelm

    2017-09-26

    The drastic growth of the population on our planet requires the efficient and sustainable use of our natural resources. Enzymes are indispensable tools for a wide range of industries producing food, pharmaceuticals, pesticides, or biofuels. Because insects constitute one of the most species-rich classes of organisms colonizing almost every ecological niche on earth, they have developed extraordinary metabolic abilities to survive in various and sometimes extreme habitats. Despite this metabolic diversity, insect enzymes have only recently generated interest in industrial applications because only a few metabolic pathways have been sufficiently characterized. Here, we address the biosynthetic route to iridoids (cyclic monoterpenes), a group of secondary metabolites used by some members of the leaf beetle subtribe Chrysomelina as defensive compounds against their enemies. The ability to produce iridoids de novo has also convergently evolved in plants. From plant sources, numerous pharmacologically relevant structures have already been described. In addition, in plants, iridoids serve as building blocks for monoterpenoid indole alkaloids with broad therapeutic applications. As the commercial synthesis of iridoid-based drugs often relies on a semisynthetic approach involving biocatalysts, the discovery of enzymes from the insect iridoid route can account for a valuable resource and economic alternative to the previously used enzymes from the metabolism of plants. Hence, this review illustrates the recent discoveries made on the steps of the iridoid pathway in Chrysomelina leaf beetles. The findings are also placed in the context of the studied counterparts in plants and are further discussed regarding their use in technological approaches.

  19. Initiatives to Improve Quality of Additively Manufactured Parts

    Science.gov (United States)

    Waller, Jess; Nichols, Charles

    2017-01-01

    NASA is providing leadership in an international effort linking government and industry resources to speed adoption of additive manufactured (AM) parts. Participants include government agencies (NASA, USAF, NIST, FAA), industry (commercial aerospace, NDE manufacturers, AM equipment manufacturers), standards organizations and academia. NASA is also partnering with its international space exploration organizations such as ESA and JAXA. NDT is identified as a universal need for all aspects of additive manufacturing.

  20. Overview of the Photovoltaic Manufacturing Technology (PVMaT) project

    International Nuclear Information System (INIS)

    Witt, C.E.; Mitchell, R.L.; Mooney, G.D.

    1993-08-01

    The Photovoltaic Manufacturing Technology (PVMaT) project is a historic government/industry photovoltaic (PV) manufacturing R ampersand D partnership composed of joint efforts between the federal government (through the US Department of Energy) and members of the US PV industry. The project's ultimate goal is to ensure that the US industry retains and extends its world leadership role in the manufacture and commercial development of PV components and systems. PVMaT is designed to do this by helping the US PV industry improve manufacturing processes, accelerate manufacturing cost reductions for PV modules, improve commercial product performance, and lay the groundwork for a substantial scale-up of US-based PV manufacturing capacities. Phase 1 of the project, the problem identification phase, was completed in early 1991. Phase 2, the problem solution phase, which addresses process-specific problems of specific manufacturers, is now underway with an expected duration of 5 years. Phase 3 addresses R ampersand D problems that are relatively common to a number of PV companies or the PV industry as a whole. These ''generic'' problem areas are being addressed through a teamed research approach

  1. Generic Challenges and Automation Solutions in Manufacturing SMEs

    DEFF Research Database (Denmark)

    Grube Hansen, David; Malik, Ali Ahmad; Bilberg, Arne

    Evermore research is conducted on smart manufacturing, digital manufacturing and other aspects of what is expected from the fourth industrial revolution known as Industry 4.0. Most of the research of Industry 4.0 is currently a better fit for large corporations than for SMEs, which in Europe howe...

  2. Reducing CO2 Emissions through Lightweight Design and Manufacturing

    Science.gov (United States)

    Carruth, Mark A.; Allwood, Julian M.; Milford, Rachel L.

    2011-05-01

    To meet targeted 50% reductions in industrial CO2 emissions by 2050, demand for steel and aluminium must be cut. Many steel and aluminium products include redundant material, and the manufacturing routes to produce them use more material than is necessary. Lightweight design and optimized manufacturing processes offer a means of demand reduction, whilst creating products to perform the same service as existing ones. This paper examines two strategies for demand reduction: lightweight product design; and minimizing yield losses through the product supply chain. Possible mass savings are estimated for specific case-studies on metal-intensive products, such as I-beams and food cans. These estimates are then extrapolated to other sectors to produce a global estimate for possible demand reductions. Results show that lightweight product design may offer potential mass savings of up to 30% for some products, whilst yield in the production of others could be improved by over 20%. If these two strategies could be combined for all products, global demand for steel and aluminium would be reduced by nearly 50%. The impact of demand reduction on CO2 emissions is presented, and barriers to the adoption of new, lightweight technologies are discussed.

  3. Subcontracting in electronics : from contract manufacturers to providers of electronic manufacturing services (EMS)

    OpenAIRE

    Liemt van, Gijsbert

    2007-01-01

    Discusses how the top contract manufacturers in the electronics industry try to become providers of electronic manufacturing services by deepening and broadening the rage of services that they offer and by diversifying into markets other than computing and telecommunications.

  4. 75 FR 80040 - Manufacturing Council

    Science.gov (United States)

    2010-12-21

    ..., developing and marketing programs in support of manufacturing industries, job creation in the manufacturing... relevant contact information such as mailing address, fax, e-mail, fixed and mobile phone numbers and...

  5. Challenges in Enzymatic Route of Mannitol Production

    OpenAIRE

    Bhatt, Sheelendra Mangal; Mohan, Anand; Srivastava, Suresh Kumar

    2012-01-01

    Mannitol is an important biochemical often used as medicine and in food sector, yet its biotechnological is not preffered in Industry for large scale production, which may be due to the multistep mechanism involved in hydrogenation and reduction. This paper is a comparative preview covering present chemical and biotechnological approaches existing today for mannitol production at industrial scale. Biotechnological routes are suitable for adaptation at industrial level for mannitol production,...

  6. Occupational exposure to natural radioactivity in the zirconium mineral manufacturing industries

    International Nuclear Information System (INIS)

    Ballesteros, L.; Zarza, I.; Ortiz, J.; Serradell, V.

    2006-01-01

    The spanish 'Real Decatur 783/2001', published as result of the adaptation of the European Council directive 96/29/EURATOM (B.S.S. directive), regulates in Spain the use of natural radioactive substances. This decree establishes the need to study and control those activities in which significant increases of the exposure of workers or members of the public could take place. One of these natural radioactive substances are zirconium minerals. They are widely employed in some industrial activities, such as the production of zirconia and zirconium chemicals, glazed ceramic products manufacture, refractories, foundry sands (including investment casting) and zirconium mineral manufacturing. Its major end uses are fine ceramics where it acts as an opacifier in glazes and enamels and also as an additive in special glass (i.e. TV glass). This paper provides a description of a measurement campaign carried out to estimate the risk of occupational exposure to natural radioactivity in the zirconium mineral manufacturing industries. Zirconium raw sands have generally a granular size of 100 to 200 μm, which may be reduced to around 2 μm for use in ceramics and paint applications by milling to flour. These sands contain varying concentrations of natural radionuclides: 232 Th, 235 U, and mostly 238 U, together with their progenies. The first part of the study is to identify situations and areas where worker s are exposed to radiation. Five pathways of exposure were found: inhalation of dust, ingestion of dust, inhalation of radon, skin contamination and external irradiation. Samples from raw materials and from the environment at the work areas are performed; both where the zircon sands are unloaded and stored and at the milling area. Secondly, collected samples are analysed to evaluate activities on those natural radionuclides. Gamma spectrometry analysis is performed for the whole of the samples. For this purpose, a Ge-HP detector (high purity Ge detectors) is used. Dust samples

  7. Cloud manufacturing: from concept to practice

    Science.gov (United States)

    Ren, Lei; Zhang, Lin; Tao, Fei; Zhao, Chun; Chai, Xudong; Zhao, Xinpei

    2015-02-01

    The concept of cloud manufacturing is emerging as a new promising manufacturing paradigm, as well as a business model, which is reshaping the service-oriented, highly collaborative, knowledge-intensive and eco-efficient manufacturing industry. However, the basic concepts about cloud manufacturing are still in discussion. Both academia and industry will need to have a commonly accepted definition of cloud manufacturing, as well as further guidance and recommendations on how to develop and implement cloud manufacturing. In this paper, we review some of the research work and clarify some fundamental terminologies in this field. Further, we developed a cloud manufacturing systems which may serve as an application example. From a systematic and practical perspective, the key requirements of cloud manufacturing platforms are investigated, and then we propose a cloud manufacturing platform prototype, MfgCloud. Finally, a public cloud manufacturing system for small- and medium-sized enterprises (SME) is presented. This paper presents a new perspective for cloud manufacturing, as well as a cloud-to-ground solution. The integrated solution proposed in this paper, including the terminology, MfgCloud, and applications, can push forward this new paradigm from concept to practice.

  8. Investment promotion in the South African manufacturing industry: incentive comparisons with Malaysia and Singapore

    Directory of Open Access Journals (Sweden)

    Martha SI Wentzel

    2014-05-01

    Full Text Available South Africa needs to increase its inward foreign direct investment in order to achieve economic growth. The purpose of this article is to explore which intervention could be launched in the short term to enhance the country's attractiveness for foreign investors. The findings of the literature review demonstrated that incentives, as a determinant of investment, are the short-term intervention with the most significant potential to attract additional foreign direct investment. A comparative study, which provided insight into the incentives that are currently offered to the manufacturing sectors of three countries (South Africa, Malaysia and Singapore, assisted in identifying two additional incentives that the South African government could introduce and three existing incentives that could be amended. The introduction or modification of these incentives could ensure that South Africa has a competitive advantage to attract investment from foreign investors and thereby increase South Africa's inward foreign direct investment in the manufacturing industry.

  9. Study on the Key Factor Parameters to Increase Productivity in Construction and Manufacturing Industries.

    Science.gov (United States)

    Almazyed, K.; Alaswad, A.; Olabi, A. G.

    2016-02-01

    Proper management of human and non-human resources in construction and manufacturing projects can give-in considerable savings in time and cost. Construction and Manufacturing industry faces issues in connection with problems related with productivity and the problems are usually connected with performance of employees. The performance of employees is affected by many factors. In this paper a survey was made on respondents who are employed various projects of Saudi Arabia. The researcher developed a theoretical framework from the existing research which was used as a Model to collect and analyze the field data to test the hypothesis. In this research activity three predictors (commitment, job satisfaction and job performance) for determining the change in productivity. The results highlight that commitment and job performance (respectively) are the two predictors which are explaining 37% of variation in the productivity of the companies. The results also show that Job Satisfaction has no role in the prediction of productivity.

  10. Implementing Manufacturing as a Service : A Pull-Driven Agent-Based Manufacturing Grid

    NARCIS (Netherlands)

    Moergestel, Leo van; Puik, Erik; Telgen, Daniël; Meyer, John-Jules Ch.

    2015-01-01

    User requirements and low-cost small quantity production are new challenges for the modern manufacturing industry. This means that small batch sizes or even the manufacturing of one single product should be affordable. To make such a system cost-effective it should be capable to use the available

  11. 75 FR 71417 - Manufacturing Council Membership

    Science.gov (United States)

    2010-11-23

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council Membership AGENCY... marketing programs in support of manufacturing industries, job creation in the manufacturing sector, or the... their travel, living and other personal expenses. Meetings are held regularly and not less than annually...

  12. The German model of capitalism and the persistence of outward foreign direct investment: evidence from German manufacturing industries

    Directory of Open Access Journals (Sweden)

    Martin T Bohl

    2011-06-01

    Full Text Available Against the backdrop of critique on the German model of capitalism in general, and German public policy in particular as to the ability to successfully adjust to rapid change and exogenous shocks in wake of economic globalisation, this paper investigates the degree of shock persistence in foreign direct investment (FDI of ten German manufacturing industries for the period 1976 to 2003. Theory on exports and non-FDI investment suggests that FDI should exhibit a considerable degree of shock persistence because they are subject to high sunk costs because of high entry and exit costs associated with the high level of asset specificity that is normally connected to FDI. Persistence in foreign direct investment time series data is established by applying various unit root tests. The results are robust to the potential presence of structural breaks in the data. The empirical analysis shows that German outward FDI in mature manufacturing industries, with one exception, exhibits a high degree of shock persistence. The results suggest, at least for mature German industries, that the sunk costs view on shock persistency is confirmed for outward FDI. The results furnish evidence for a tentative assessment of the relationship between German public policy and FDI strategies of multinational firms.

  13. Economics of Future Growth in Photovoltaics Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Basore, Paul A.; Chung, Donald; Buonassisi, Tonio

    2015-06-14

    The past decade's record of growth in the photovoltaics manufacturing industry indicates that global investment in manufacturing capacity for photovoltaic modules tends to increase in proportion to the size of the industry. The slope of this proportionality determines how fast the industry will grow in the future. Two key parameters determine this slope. One is the annual global investment in manufacturing capacity normalized to the manufacturing capacity for the previous year (capacity-normalized capital investment rate, CapIR, units $/W). The other is how much capital investment is required for each watt of annual manufacturing capacity, normalized to the service life of the assets (capacity-normalized capital demand rate, CapDR, units $/W). If these two parameters remain unchanged from the values they have held for the past few years, global manufacturing capacity will peak in the next few years and then decline. However, it only takes a small improvement in CapIR to ensure future growth in photovoltaics. Any accompanying improvement in CapDR will accelerate that growth.

  14. Servitization in industry

    CERN Document Server

    2014-01-01

    Presenting both a comprehensive collection of sectorial studies of servitization in manufacturing industries, on the one hand, and research investigating the necessity to adapt various processes and departments of manufacturing companies to servitized business models, on the other, ‘Servitization in Industry’ informs the scientific and managerial servitization debate with recent data regarding industrial servitization models. This book provides detailed analyses of manufacturing sectors that elucidate the options and barriers related to servitization from a sector-based perspective. This sector-based approach allows for an individual and in-depth examination of recent relationships among manufacturers and their clients by explaining leads and lags in servitization. Serving to maximize reader insight into the specific characteristics of different sectors with their barriers and potentials, the book presents frameworks for successful servitization of the core sectors in European manufacturing industries whi...

  15. Whither North Carolina furniture manufacturing?

    OpenAIRE

    Robert L. Lacy

    2004-01-01

    North Carolina's furniture manufacturing industry has contracted in recent years as imports have gained a greater share of the domestic furniture market. Rapid growth of the furniture industry in China and a surge in exports from that country to the United States in particular have contributed to plant closings and consolidation of operations in the state. North Carolina's furniture manufacturers are adapting to the emergence of global competition and are developing new corporate strategies t...

  16. Investment strategy for sustainable society by development of regional economies and prevention of industrial pollutions in Japanese manufacturing sectors

    International Nuclear Information System (INIS)

    Sueyoshi, Toshiyuki; Goto, Mika

    2014-01-01

    A balance between industrial pollution prevention and economic growth becomes a world-wide issue to develop a sustainable society in many industrial nations. To discuss the issue, this study proposes a new use of DEA environmental assessment to determine how to effectively allocate capital for developing regional industries. The amount of capital is used to invest for technology innovation for both local economic growth and environmental protection. In this study, the proposed approach separates outputs into desirable and undesirable categories. Inputs are also separated into two categories, one of which indicates an amount of investment on capital assets. The other category is used for production activities. The proposed approach unifies them by two disposability concepts. This study has evaluated the performance of manufacturing industries in 47 prefectures (local government units in Japan) by Unified Efficiency under Natural disposability (UEN), Unified Efficiency under Managerial disposability (UEM) and Unified Efficiency under Natural and Managerial disposability (UENM). The UENM is further separated into its two cases: with and without a possible occurrence on desirable congestion, or technology innovation, on undesirable outputs. This study has empirically confirmed that Japanese manufacturing industries need to make their efforts to reduce greenhouse gas emissions and air pollution substances by investing in technology innovation. Furthermore, most of economic activities are currently located at metropolitan regions (e.g., Tokyo) in Japan. To develop a sustainable society, Japan needs to allocate capital into regions with a high level of investment effectiveness by shifting the manufacturing industries from the metropolitan regions to much promising local areas identified in this study. Such a shift, along with technology innovation, makes it possible to reduce air pollutions in the entire Japan by balancing economic growth and pollution prevention. This

  17. Applied simulation and optimization 2 new applications in logistics, industrial and aeronautical practice

    CERN Document Server

    Mota, Idalia

    2017-01-01

    Building on the author’s earlier Applied Simulation and Optimization, this book presents novel methods for solving problems in industry, based on hybrid simulation-optimization approaches that combine the advantages of both paradigms. The book serves as a comprehensive guide to tackling scheduling, routing problems, resource allocations and other issues in industrial environments, the service industry, production processes, or supply chains and aviation. Logistics, manufacturing and operational problems can either be modelled using optimization techniques or approaches based on simulation methodologies. Optimization techniques have the advantage of performing efficiently when the problems are properly defined, but they are often developed through rigid representations that do not include or accurately represent the stochasticity inherent in real systems. Furthermore, important information is lost during the abstraction process to fit each problem into the optimization technique. On the other hand, simulatio...

  18. Potential Valuation of Route Prague – Trutnov after D11 Completion

    Directory of Open Access Journals (Sweden)

    Hašek Jakub

    2017-11-01

    Full Text Available In the Czech Republic, there are many regions with unbalanced competition between bus and rail transport on main transport routes. This is due to differences in the quality of transport infrastructure, the attractiveness of the region, routing traffic routes or economic attractiveness for new investors and industry. The aim of this article is to evaluate the potential for bus operators on the route from Prague to Trutnov after completion of D11 highway project.

  19. Additive manufacturing in production: challenges and opportunities

    Science.gov (United States)

    Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

    2015-03-01

    Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

  20. Integrated and Intelligent Manufacturing: Perspectives and Enablers

    Directory of Open Access Journals (Sweden)

    Yubao Chen

    2017-10-01

    Full Text Available With ever-increasing market competition and advances in technology, more and more countries are prioritizing advanced manufacturing technology as their top priority for economic growth. Germany announced the Industry 4.0 strategy in 2013. The US government launched the Advanced Manufacturing Partnership (AMP in 2011 and the National Network for Manufacturing Innovation (NNMI in 2014. Most recently, the Manufacturing USA initiative was officially rolled out to further “leverage existing resources... to nurture manufacturing innovation and accelerate commercialization” by fostering close collaboration between industry, academia, and government partners. In 2015, the Chinese government officially published a 10-year plan and roadmap toward manufacturing: Made in China 2025. In all these national initiatives, the core technology development and implementation is in the area of advanced manufacturing systems. A new manufacturing paradigm is emerging, which can be characterized by two unique features: integrated manufacturing and intelligent manufacturing. This trend is in line with the progress of industrial revolutions, in which higher efficiency in production systems is being continuously pursued. To this end, 10 major technologies can be identified for the new manufacturing paradigm. This paper describes the rationales and needs for integrated and intelligent manufacturing (i2M systems. Related technologies from different fields are also described. In particular, key technological enablers, such as the Internet of Things and Services (IoTS, cyber-physical systems (CPSs, and cloud computing are discussed. Challenges are addressed with applications that are based on commercially available platforms such as General Electric (GE’s Predix and PTC’s ThingWorx.

  1. Fatigue mitigation effects of en-route napping on commercial airline pilots flying international routes

    Science.gov (United States)

    Baldwin, Jarret Taylor

    The introduction of ultra-long range commercial aircraft and the evolution of the commercial airline industry has provided new opportunities for air carriers to fly longer range international route segments while deregulation, industry consolidation, and the constant drive to reduce costs wherever possible has pressured airline managements to seek more productivity from their pilots. At the same time, advancements in the understanding of human physiology have begun to make their way into flight and duty time regulations and airline scheduling practices. In this complex and ever changing operating environment, there remains an essential need to better understand how these developments, and other daily realities facing commercial airline pilots, are affecting their fatigue management strategies as they go about their rituals of getting to and from their homes to work and performing their flight assignments. Indeed, the need for commercial airline pilots to have access to better and more effective fatigue mitigation tools to combat fatigue and insure that they are well rested and at the top of their game when flying long-range international route segments has never been greater. This study examined to what extent the maximum fatigue states prior to napping, as self-accessed by commercial airline pilots flying international route segments, were affected by a number of other common flight assignment related factors. The study also examined to what extent the availability of scheduled en-route rest opportunities, in an onboard crew rest facility, affected the usage of en-route napping as a fatigue mitigation strategy, and to what extent the duration of such naps affected the perceived benefits of such naps as self-accessed by commercial airline pilots flying international route segments. The study utilized an online survey tool to collect data on crew position, prior flight segments flown in the same duty period, augmentation, commuting, pre-flight rest obtained in the

  2. Micro/Nano manufacturing

    DEFF Research Database (Denmark)

    Tosello, Guido

    2017-01-01

    Micro- and nano-scale manufacturing has been the subject of an increasing amount of interest and research effort worldwide in both academia and industry over the past 10 years.Traditional (MEMS) manufacturing, but also precision manufacturing technologies have been developed to cover micro......-scale dimensions and accuracies. Furthermore, these fundamentally different technology ecosystems are currently combined in order to exploit strengths of both platforms. One example is the use of lithography-based technologies to establish nanostructures that are subsequently transferred to 3D geometries via...

  3. Framework for Sustainability Performance Assessment for Manufacturing Processes- A Review

    Science.gov (United States)

    Singh, K.; Sultan, I.

    2017-07-01

    Manufacturing industries are facing tough competition due to increasing raw material cost and depleting natural resources. There is great pressure on the industry to produce environmental friendly products using environmental friendly processes. To address these issues modern manufacturing industries are focusing on sustainable manufacturing. To develop more sustainable societies, industries need to better understand how to respond to environmental, economic and social challenges. This paper proposed some framework and tools that accelerate the transition towards a sustainable system. The developed framework will be beneficial for sustainability assessment comparing different plans alongside material properties, ultimately helping the manufacturing industries to reduce the carbon emissions and material waste, besides improving energy efficiency. It is expected that this would be highly beneficial for determination of environmental impact of a process at early design stages. Therefore, it would greatly help the manufacturing industries for selection of process plan based on sustainable indices. Overall objective of this paper would have good impact on reducing air emissions and protecting environment. We expect this work to contribute to the development of a standard reference methodology to help further sustainability in the manufacturing sector.

  4. Control systems engineering in continuous pharmaceutical manufacturing. May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Myerson, Allan S; Krumme, Markus; Nasr, Moheb; Thomas, Hayden; Braatz, Richard D

    2015-03-01

    This white paper provides a perspective of the challenges, research needs, and future directions for control systems engineering in continuous pharmaceutical processing. The main motivation for writing this paper is to facilitate the development and deployment of control systems technologies so as to ensure quality of the drug product. Although the main focus is on small-molecule pharmaceutical products, most of the same statements apply to biological drug products. An introduction to continuous manufacturing and control systems is followed by a discussion of the current status and technical needs in process monitoring and control, systems integration, and risk analysis. Some key points are that: (1) the desired objective in continuous manufacturing should be the satisfaction of all critical quality attributes (CQAs), not for all variables to operate at steady-state values; (2) the design of start-up and shutdown procedures can significantly affect the economic operation of a continuous manufacturing process; (3) the traceability of material as it moves through the manufacturing facility is an important consideration that can at least in part be addressed using residence time distributions; and (4) the control systems technologies must assure quality in the presence of disturbances, dynamics, uncertainties, nonlinearities, and constraints. Direct measurement, first-principles and empirical model-based predictions, and design space approaches are described for ensuring that CQA specifications are met. Ways are discussed for universities, regulatory bodies, and industry to facilitate working around or through barriers to the development of control systems engineering technologies for continuous drug manufacturing. Industry and regulatory bodies should work with federal agencies to create federal funding mechanisms to attract faculty to this area. Universities should hire faculty interested in developing first-principles models and control systems technologies for

  5. Cloud manufacturing distributed computing technologies for global and sustainable manufacturing

    CERN Document Server

    Mehnen, Jörn

    2013-01-01

    Global networks, which are the primary pillars of the modern manufacturing industry and supply chains, can only cope with the new challenges, requirements and demands when supported by new computing and Internet-based technologies. Cloud Manufacturing: Distributed Computing Technologies for Global and Sustainable Manufacturing introduces a new paradigm for scalable service-oriented sustainable and globally distributed manufacturing systems.   The eleven chapters in this book provide an updated overview of the latest technological development and applications in relevant research areas.  Following an introduction to the essential features of Cloud Computing, chapters cover a range of methods and applications such as the factors that actually affect adoption of the Cloud Computing technology in manufacturing companies and new geometrical simplification method to stream 3-Dimensional design and manufacturing data via the Internet. This is further supported case studies and real life data for Waste Electrical ...

  6. CT-assisted agile manufacturing

    Science.gov (United States)

    Stanley, James H.; Yancey, Robert N.

    1996-11-01

    The next century will witness at least two great revolutions in the way goods are produced. First, workers will use the medium of virtual reality in all aspects of marketing, research, development, prototyping, manufacturing, sales and service. Second, market forces will drive manufacturing towards small-lot production and just-in-time delivery. Already, we can discern the merging of these megatrends into what some are calling agile manufacturing. Under this new paradigm, parts and processes will be designed and engineered within the mind of a computer, tooled and manufactured by the offspring of today's rapid prototyping equipment, and evaluated for performance and reliability by advanced nondestructive evaluation (NDE) techniques and sophisticated computational models. Computed tomography (CT) is the premier example of an NDE method suitable for future agile manufacturing activities. It is the only modality that provides convenient access to the full suite of engineering data that users will need to avail themselves of computer- aided design, computer-aided manufacturing, and computer- aided engineering capabilities, as well as newly emerging reverse engineering, rapid prototyping and solid freeform fabrication technologies. As such, CT is assured a central, utilitarian role in future industrial operations. An overview of this exciting future for industrial CT is presented.

  7. Micro Manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Manufacturing deals with systems that include products, processes, materials and production systems. These systems have functional requirements, constraints, design parameters and process variables. They must be decomposed in a systematic manner to achieve the best possible system performance....... If a micro manufacturing system isn’t designed rationally and correctly, it will be high-cost, unreliable, and not robust. For micro products and systems it is a continuously increasing challenge to create the operational basis for an industrial production. As the products through product development...... processes are made applicable to a large number of customers, the pressure in regard to developing production technologies that make it possible to produce the products at a reasonable price and in large numbers is growing. The micro/nano manufacturing programme at the Department of Manufacturing...

  8. 75 FR 26967 - Guidance for Industry: Use of Water by Food Manufacturers in Areas Subject to a Boil-Water...

    Science.gov (United States)

    2010-05-13

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-D-0236] Guidance for Industry: Use of Water by Food Manufacturers in Areas Subject to a Boil-Water Advisory; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

  9. Methodology to produce a water and energy stream map (WESM in the South African manufacturing industry

    Directory of Open Access Journals (Sweden)

    Davies, Edward

    2016-11-01

    Full Text Available The increasing demand for water and energy in South Africa, and the capacity constraints and restrictions of both resources, have led to a rapid increase in their cost. The manufacturing industry remains South Africa’s third-largest consumer of water and second- largest consumer of national energy. The improvement of water and energy efficiency is becoming an increasingly important theme for both organisational success and national economic sustainability. This paper presents the ‘lean based water and energy stream mapping framework’ developed for the manufacturing industry, with the specific objective of decreasing its water and energy intensity. As with the traditional value stream mapping tool, the water and energy stream mapping focuses on eliminating water- and energy-specific wastes within a process. Water and energy waste categories that will be used in conjunction with the framework will also be discussed. The key objective of this paper is to detail the process of creating the water and energy stream mapping, and the statistical forecasting methodology used to develop the baseline water and energy demand data. The outcome of the implementation of the framework is the future state water and energy stream mapping, which is effectively a blueprint for increased water and energy efficiency within a studied process.

  10. 76 FR 33244 - Manufacturing Council

    Science.gov (United States)

    2011-06-08

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council AGENCY... experience in promoting, developing and marketing programs in support of manufacturing industries, in job... Council meetings and events are responsible for their travel, living and other personal expenses. Meetings...

  11. Manufacturing ontology through templates

    Directory of Open Access Journals (Sweden)

    Diciuc Vlad

    2017-01-01

    Full Text Available The manufacturing industry contains a high volume of knowhow and of high value, much of it being held by key persons in the company. The passing of this know-how is the basis of manufacturing ontology. Among other methods like advanced filtering and algorithm based decision making, one way of handling the manufacturing ontology is via templates. The current paper tackles this approach and highlights the advantages concluding with some recommendations.

  12. Six sigma critical success factors in manufacturing industries

    Science.gov (United States)

    Mustafa, Zainol; Jamaluddin, Z.

    2017-04-01

    The success of Six Sigma implementation is known to depend on a number of contributing factors. The purpose of this paper is to explore Six Sigma critical success factors (CSFs) in the context of Malaysian manufacturing organizations. Although Six Sigma success factors have been abundantly researched in the global context, in this paper, a maiden attempt is made to identify, through an extensive literature review, the CSFs for Six Sigma implementation followed by their validation using primary data collection from Malaysian manufacturing companies. A total of 33 indicators have thus been compiled through an extensive literature review which then been grouped into 6 contributing factors. These contributing success factors are then validated through an empirical research of selected Malaysian manufacturing companies at various stages of implementation of the Six Sigma process improvement methodology. There has been an overemphasis on the role and commitment of the management in the success of a Six Sigma program. Though it is undoubted, certain other factors also play an equally important role in ensuring that the Six Sigma programs are successful. The factor analysis of CSFs of the Malaysian manufacturing organizations selected in this study demonstrates that the top factor is a composite factor showing combination of the ability of the project teams to use the process management on quality initiative and a training using a proper analysis in problem solving. The CSFs extracted through the factor analysis could provide a basis for manufacturing organizations embarking on the Six Sigma journey to look beyond just management involvement. Thus, one can develop an integrated framework of other factors as outlined and give them appropriate priority and focus.

  13. 6th Workshop on Service Orientation in Holonic and Multi-Agent Manufacturing

    CERN Document Server

    Trentesaux, Damien; Thomas, André; Leitão, Paulo; Oliveira, José

    2017-01-01

    The book offers an integrated vision on Cloud and HPC, Big Data, Analytics and virtualization in computing-oriented manufacturing, combining information and communication technologies, service-oriented control of holonic architectures as well as enterprise integration solutions based on SOA principles. It is structured in eight parts, each one grouping research and trends in digital manufacturing and service oriented manufacturing control: Cloud and Cyber-Physical Systems for Smart Manufacturing, Reconfigurable and Self-organized Multi-Agent Systems for Industry and Service, Sustainability Issues in Intelligent Manufacturing Systems, Holonic and Multi-agent System Design for Industry and Service, Should Intelligent Manufacturing Systems be Dependable and Safe?, Service-oriented Management and Control of Manufacturing Systems, Engineering and Human Integration in Flexible and Reconfigurable Industrial Systems,Virtualization and Simulation in Computing-oriented Industry and Service.

  14. A Noble Approach of Process Automation in Galvanized Nut, Bolt Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Akash Samanta

    2012-05-01

    Full Text Available Corrosion costs money”, The Columbus battle institute estimates that corrosion costs Americans more than $ 220 billion annually, about 4.3% of the gross natural product [1].Now a days due to increase of pollution, the rate of corrosion is also increasing day-by-day mainly in India, so, to save the steel structures, galvanizing is the best and the simplest solution. Due to this reason galvanizing industries are increasing day-by-day since mid of 1700s.Galvanizing is a controlled metallurgical combination of zinc and steel that can provide a corrosion resistance in a wide variety of environment. In fact, the galvanized metal corrosion resistance factor can be some 70 to 80 times greater that the base metal material. Keeping in mind the importance of this industry, a noble approach of process automation in galvanized nut-bolt  manufacturing plant is presented here as nuts and bolts are the prime ingredient of any structure. In this paper the main objectives of any industry like survival, profit maximization, profit satisfying and sales growth are fulfilled. Furthermore the environmental aspects i.e. pollution control and energy saving are also considered in this paper. The whole automation process is done using programmable logic controller (PLC which has number of unique advantages like being faster, reliable, requires less maintenance and reprogrammable. The whole system has been designed and tested using GE, FANUC PLC.

  15. Manufacturing and Merchandising Careers

    Science.gov (United States)

    Ryan, Peter J.; And Others

    1977-01-01

    Anyone with a flair for business, product development, or promotion might consider a manufacturing or merchandising occupation. The music industry offers many career opportunities for administrators, salespersons, marketing specialists--the record industry offers positions from promotion manager to rack jobber. Describes instrument company…

  16. Characterization of new international business of traditional manufacturing industries

    Directory of Open Access Journals (Sweden)

    Santiago Cantarero Sanz

    2013-07-01

    Full Text Available The main objective of this study was to study the characteristics of the New International Business (NIS or Born-Global in a sample of 81 SMEs belonging to the Spanish textile sector. This is descriptive analysis regarding the location, the subsector of activity, size, economic performance and internationalization strategy implemented by the NEI (2005-2009.The results identified three groups of NIS: export, import and export-import. The group of companies that makeup the largest importers and are associated with smaller companies. The exporters appear to be related more to low techsub-sectors while more internationally committed are those with a higher dimension. Regarding the location not detected any evidence of territorial pattern. Finally, among firms internationalized in the time period analyzed, it is also noteworthy that the economic performance of these is higher among importers. This study provides information on why the same country and same industry some companies decide shortly be created to assume certain levels of risk, engaging in operations engaged in foreign markets while others do not. It also participates in the debate on the competitiveness of manufacturing companies.

  17. Joint R and D in low-carbon technology development in China: A case study of the wind-turbine manufacturing industry

    International Nuclear Information System (INIS)

    Zhou Yuanchun; Zhang Bing; Zou Ji; Bi Jun; Wang Ke

    2012-01-01

    China faces the dual challenges of climate change and increased energy demand. These challenges in turn increase the demand for wind energy development. Along with rapid growth in manufacturing capacity, Chinese companies have aspired to increase their innovation capacity in order to enhance their competitiveness in the market. Joint research and development (R and D) is an attractive path for Chinese companies striving to advance their R and D capacity. This paper examines joint R and D between Chinese wind-turbine manufacturing companies and foreign design firms, assessing the performance of joint R and D activities in China using the structure-conduct-performance (SCP) framework. The study found that joint R and D has improved Chinese companies’ technical capacity, human resources and financial growth. However, the effect on Chinese companies’ innovation capacity is still limited because of unequal technical capacities of the two sides in collaboration, as well as their preference for augmenting profits rather than technical capacity. Current joint R and D mode is only the extension of licensing mode in wind-turbine manufacturing industry. - Highlights: ► Joint R and D is an attractive path for Chinese companies striving to advance R and D capacity. ► We examined the performance of joint R and D in wind-turbine manufacturing industry. ► Joint R and D has improved Chinese companies’ technical capacity. ► The effect of Joint R and D on innovation capacity is still limited.

  18. The Industry 4.0 Journey: Start the Learning Journey with the Reference Architecture Model Industry 4.0

    DEFF Research Database (Denmark)

    Nardello, Marco; Møller, Charles; Gøtze, John

    2017-01-01

    The wave of the fourth industrial revolution (Industry 4.0) is breaking on manufacturing companies. In manufacturing, one of the buzzwords of the moment is "Smart production". Smart production involves manufacturing equipment with many sensors that can generate and transmit large amounts of data....... Model Industry 4.0 (RAMI4.0) standard for Smart production. The instantiation contributed to organizational learning in the laboratory by collecting and sharing up-to-date information concerning manufacturing equipment....

  19. Flexibility configurations and preventive maintenance impact on job-shop manufacturing systems

    Directory of Open Access Journals (Sweden)

    Paolo Renna

    2017-03-01

    Full Text Available Manufacturing systems need to be able to work under the dynamic and uncertain production environment. Machine and routing flexibility combined with preventive maintenance actions can improve the performance of the manufacturing systems under dynamic conditions. This paper evaluates different levels of machine and routing flexibility combined with different degrees of preventive maintenance policy. The performance measures considered are throughput, work in process and throughput. The performance measures are compared with a system without any flexibility and no preventive maintenance actions. Different levels of flexibility and preventive maintenance actions are examined under a simulation environment. The simulation results highlight more important factors for the performance measures and the best combination of the factors to improve the performance.

  20. Industrial Sickness in Indian Manufacturing

    OpenAIRE

    Falk, Rahel

    2005-01-01

    In India, the term ‘sick units’ refers to economically unviable firms which are kept alive ‘in the public interest’ by means of subsidies of various kinds. Since this practice is common, and large parts of the industrial sector are affected, this phenomenon is referred to as industrial sickness. As of March 2001, the Reserve Bank of India counted over a quarter of a million of sick units with outstanding credit worth more than a quarter of a trillion of Indian Rupees, i.e. about 1.2 percent o...

  1. Directory of French photovoltaic research and industry 2011

    International Nuclear Information System (INIS)

    Poubeau, Romain; Simmonet, Raphael; Canals, Jonathan

    2011-05-01

    After an overview of what is at stake in terms of industrial employment in the photovoltaic sector, a presentation of competitiveness clusters, a description of the value chain (cell manufacturers, arrays manufacturers, power inverter manufacturers, electric equipment manufacturers, structure component manufacturers, fabrication steps, etc.) in the photovoltaic sector, this document proposes a directory (addresses, activity descriptions) of research and industrial actors of the photovoltaic sector in France: research centres, manufacturers, industrial projects

  2. Determination of Dosimetric Parameters of the Second Model of Pd-103 Seed Manufactured at Agricultural, Medical and Industrial Research School

    OpenAIRE

    Gholamreza Raisali; Mahdi Sadeghi; Vahideh Ataeinia; Arjang Shahvar; Maryam Ghasemi Ghonchehnazi

    2008-01-01

    Introduction: The use of low energy isotopes such as  103 Pd in brachytherapy for the treatment of cancers  such as prostate, eye, head, neck, breast and cervix is increasing. In this regard, different models of Pd- 103  seeds  have  been  designed  and  manufactured  at  the  Agricultural,  Medical  and  Industrial  Research  School (AMIRS) of Atomic Energy Organization of Iran. In this research, the dosimetric parameters of  the second model of Pd-103 seed manufactured at AMIRS have been ca...

  3. Combined prediction model for supply risk in nuclear power equipment manufacturing industry based on support vector machine and decision tree

    International Nuclear Information System (INIS)

    Shi Chunsheng; Meng Dapeng

    2011-01-01

    The prediction index for supply risk is developed based on the factor identifying of nuclear equipment manufacturing industry. The supply risk prediction model is established with the method of support vector machine and decision tree, based on the investigation on 3 important nuclear power equipment manufacturing enterprises and 60 suppliers. Final case study demonstrates that the combination model is better than the single prediction model, and demonstrates the feasibility and reliability of this model, which provides a method to evaluate the suppliers and measure the supply risk. (authors)

  4. Reducing of Manufacturing Lead Time by Implementation of Lean Manufacturing Principles

    Directory of Open Access Journals (Sweden)

    Hussein Salem Ketan

    2015-08-01

    Full Text Available Many organizations today are interesting to implementing lean manufacturing principles that should enable them to eliminating the wastes to reducing a manufacturing lead time. This paper concentrates on increasing the competitive level of the company in globalization markets and improving of the productivity by reducing the manufacturing lead time. This will be by using the main tool of lean manufacturing which is value stream mapping (VSM to identifying all the activities of manufacturing process (value and non-value added activities to reducing elimination of wastes (non-value added activities by converting a manufacturing system to pull instead of push by applying some of pull system strategies as kanban and first on first out lane (FIFO. ARENA software is used to simulate the current and future state. This work is executed in the state company for electrical industries in Baghdad. The obtained results of the application showed that implementation of lean principles helped on reducing of a manufacturing lead time by 33%.

  5. Manufacturing Technology Information Analysis Center: Knowledge Is Strength

    Science.gov (United States)

    Safar, Michal

    1992-01-01

    The Center's primary function is to facilitate technology transfer within DoD, other government agencies and industry. The DoD has recognized the importance of technology transfer, not only to support specific weapon system manufacture, but to strengthen the industrial base that sustains DoD. MTIAC uses an experienced technical staff of engineers and information specialists to acquire, analyze, and disseminate technical information. Besides ManTech project data, MTIAC collects manufacturing technology from other government agencies, commercial publications, proceedings, and various international sources. MTIAC has various means of disseminating this information. Much of the technical data is on user accessible data bases. The Center researches and writes a number of technical reports each year and publishes a newsletter monthly. Customized research is performed in response to specific inquiries from government and industry. MTIAC serves as a link between Government and Industry to strengthen the manufacturing technology base through the dissemination of advanced manufacturing information.

  6. Advances in 3D printing & additive manufacturing technologies

    CERN Document Server

    Pandey, Pulak; Kumar, L

    2017-01-01

    This edited volume comprises select chapters on advanced technologies for 3D printing and additive manufacturing and how these technologies have changed the face of direct, digital technologies for rapid production of models, prototypes and patterns. Because of its wide applications, 3D printing and additive manufacturing technology has become a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across industries such as consumer products, aerospace, medical devices and automotives. The objective of this book is to help designers, R&D personnel, and practicing engineers understand the state-of-the-art developments in the field of 3D Printing and Additive Manufacturing. .

  7. Generic Challenges and Automation Solutions in Manufacturing SMEs

    DEFF Research Database (Denmark)

    Grube Hansen, David; Malik, Ali Ahmad; Bilberg, Arne

    2017-01-01

    Evermore research is conducted on smart manufacturing, digital manufacturing and other aspects of what is expected from the fourth industrial revolution known as Industry 4.0. Most of the research of Industry 4.0 is currently a better fit for large corporations than for SMEs, which in Europe...... of the project, identifies a correlation between the challenges, age and size of the companies. The identified correlation lay ground for an Industry 4.0 light concept, targeting the identified generic challenges of companies employing 10-50 people. The solutions presented are based on cloud computing, Internet...... however represent 98% of the manufacturing industry. In general, SMEs produce high-mix low-volume products, which require a high degree of flexibility. Historically flexibility and automation have been contradictory, but as automation becomes smarter, digitalized and less expensive, this may change which...

  8. Long working hours and emotional well-being in korean manufacturing industry employees.

    Science.gov (United States)

    Lee, Kyoung-Hye; Kim, Jong-Eun; Kim, Young-Ki; Kang, Dong-Mug; Yun, Myeong-Ja; Park, Shin-Goo; Song, Jae-Seok; Lee, Sang-Gil

    2013-12-05

    Korea is well known for its long work hours amongst employees. Because workers of the manufacturing industry are constantly exposed to extended work hours, this study was based on how long work hours affect their emotional well-being. The analysis was done using the secondary Korean Working Condition Survey (KWCS). Long work hours were defined to be more than 48 hours, and they were subcategorized into units of 52 hours and 60 hours. Based on the WHO (five) well-being index, emotional state was subdivided into three groups - reference group, low-mood group, and possible depression group- where 28 points and 50 points were division points, and two groups were compared at a time. Association between long work hours and emotional state was analyzed using binary and multinomial logistic regression analysis. Working for extended working hours in the manufacturing industry showed a statistically significant increase (t test p work-related characteristics were fixed as controlled variables, as work hours increased the odds ratio of the possible depression group increased compared to the reference group, and especially the odds ratio was 2.73 times increased for work hours between 48-52 and 4.09 times increased for 60 hours or more and both were statistically significant. In comparing the low-mood group and possible depression group, as work hours increased the odds ratio increased to 1.73, 2.39, and 4.16 times, and all work hours from working 48-52 hours, 53-60 hours, and 60 hours or more were statistically significant. Multinomial logistic regression analysis also showed that among the reference group and possible group, the possible depression group was statistically significant as odds ratio increased to 2.94 times in working 53-60 hours, and 4.35 times in 60 hours or more. Long work hours have an adverse effect on emotional well-being. A more diversified research towards variables that affect long work hours and emotional well-being and how they interact with each

  9. Electronic manufacturing and packaging in Japan

    Science.gov (United States)

    Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

    1995-01-01

    This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

  10. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  11. a Web-Based Framework for Visualizing Industrial Spatiotemporal Distribution Using Standard Deviational Ellipse and Shifting Routes of Gravity Centers

    Science.gov (United States)

    Song, Y.; Gui, Z.; Wu, H.; Wei, Y.

    2017-09-01

    Analysing spatiotemporal distribution patterns and its dynamics of different industries can help us learn the macro-level developing trends of those industries, and in turn provides references for industrial spatial planning. However, the analysis process is challenging task which requires an easy-to-understand information presentation mechanism and a powerful computational technology to support the visual analytics of big data on the fly. Due to this reason, this research proposes a web-based framework to enable such a visual analytics requirement. The framework uses standard deviational ellipse (SDE) and shifting route of gravity centers to show the spatial distribution and yearly developing trends of different enterprise types according to their industry categories. The calculation of gravity centers and ellipses is paralleled using Apache Spark to accelerate the processing. In the experiments, we use the enterprise registration dataset in Mainland China from year 1960 to 2015 that contains fine-grain location information (i.e., coordinates of each individual enterprise) to demonstrate the feasibility of this framework. The experiment result shows that the developed visual analytics method is helpful to understand the multi-level patterns and developing trends of different industries in China. Moreover, the proposed framework can be used to analyse any nature and social spatiotemporal point process with large data volume, such as crime and disease.

  12. A WEB-BASED FRAMEWORK FOR VISUALIZING INDUSTRIAL SPATIOTEMPORAL DISTRIBUTION USING STANDARD DEVIATIONAL ELLIPSE AND SHIFTING ROUTES OF GRAVITY CENTERS

    Directory of Open Access Journals (Sweden)

    Y. Song

    2017-09-01

    Full Text Available Analysing spatiotemporal distribution patterns and its dynamics of different industries can help us learn the macro-level developing trends of those industries, and in turn provides references for industrial spatial planning. However, the analysis process is challenging task which requires an easy-to-understand information presentation mechanism and a powerful computational technology to support the visual analytics of big data on the fly. Due to this reason, this research proposes a web-based framework to enable such a visual analytics requirement. The framework uses standard deviational ellipse (SDE and shifting route of gravity centers to show the spatial distribution and yearly developing trends of different enterprise types according to their industry categories. The calculation of gravity centers and ellipses is paralleled using Apache Spark to accelerate the processing. In the experiments, we use the enterprise registration dataset in Mainland China from year 1960 to 2015 that contains fine-grain location information (i.e., coordinates of each individual enterprise to demonstrate the feasibility of this framework. The experiment result shows that the developed visual analytics method is helpful to understand the multi-level patterns and developing trends of different industries in China. Moreover, the proposed framework can be used to analyse any nature and social spatiotemporal point process with large data volume, such as crime and disease.

  13. Wide and High Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Roschli, Alex C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-03-01

    The goal of this project is to develop and demonstrate the enabling technologies for Wide and High Additive Manufacturing (WHAM). WHAM will open up new areas of U.S. manufacturing for very large tooling in support of the transportation and energy industries, significantly reducing cost and lead time. As with Big Area Additive Manufacturing (BAAM), the initial focus is on the deposition of composite materials.

  14. Exploring the Upgrading of Chinese Automotive Manufacturing Industry in the Global Value Chain: An Empirical Study Based on Panel Data

    Directory of Open Access Journals (Sweden)

    Fucai Lu

    2015-05-01

    Full Text Available In the age of globalization, the upgrading of China’s manufacturing industries has attracted great attention from both academicians and practitioners, as it certainly has great implications for the development of China and, even further, for the development of the whole world. To address this issue, the study clarifies the effects of the internal technological innovation capability (ITIC and external linkages (ELs on upgrading the Chinese automotive manufacturing industry (CAMI in the global value chain, in order to indicate the appropriate way for the CAMI to be further upgraded and provide references for the formulation of regional automotive industrial policies. Based on Chinese panel data, the results confirm that both ITIC and EL are important for the upgrading of the CAMI, with ITIC being the more important. Improvement of ITIC facilitates the industry’s cooperation with the EL, resulting in better knowledge access. Furthermore, the results of cluster analysis reveal that regions with relatively developed automotive industries place emphasis on both the ITIC and EL. However, in some regions (e.g., Shanghai and Chongqing, the utility of EL seems insufficient. Therefore, the results of this paper, on the one hand, suggest policies should be directed towards increasing the ITIC of CAMI. On the other hand, in some regions, managers and policymakers need to explore further the advantage of clustering.

  15. The manufacturing role in fuel performance

    International Nuclear Information System (INIS)

    Barr, A.P.

    1997-01-01

    Manufacturing companies have been involved in the CANDU fuel industry for more than 40 years. Early manufacturing contributions were the development of materials and processes used to fabricate the CANDU fuel bundle. As CANDU reactors were commissioned, the manufacturing contribution has been to produce economical, high quality fuel for the CANDU market. (author)

  16. 2014 International Conference on Manufacturing, Optimization, Industrial and Material Engineering

    International Nuclear Information System (INIS)

    Gaol, Ford Lumban; Webb, Jeff; Ding, Jun

    2014-01-01

    The 2nd International Conference on Manufacturing, Optimization, Industrial and Material Engineering 2014 (MOIME 2014), was held at the Grand Mercure Harmoni, Opal Room 3rd Floor, Jakarta, Indonesia, during 29–30 March 2014. The MOIME 2014 conference is designed to bring together researchers, engineers and scientists in the domain of interest from around the world. MOIME 2014 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that relate to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 97 papers and after rigorous review, 24 papers were accepted. The participants come from 7 countries. There are 4 (four) parallel session and 2 Invited Speakers and one workshop. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of MOIME 2014. The Editors of the MOIME 2014 Proceedings Editors Dr Ford Lumban Gaol Jeff Webb, PhD Professor Jun Ding, PhD

  17. An analysis of vendor innovation capability in the contract electronics manufacturing industry

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

    2016-01-01

    the contract, vendors can use different configurations of the competitive priorities of cost, quality, delivery and flexibility. The research aggregates the capabilities that influence the innovative capability of a vendor into the innovation-related capabilities (IRCs) of design, new product introduction......Limited academic research has been given to analysing the innovation capabilities of vendors in outsourcing contracts. This paper seeks to address this gap in the literature by enhancing our understanding of how the innovation capability of vendors is deployed to win, run and renew outsourcing...... contracts with their customers. Employing the resource-based view as a theoretical basis and undertaking in-depth case study analysis of three vendors in the electronic manufacturing services industry, the research shows that to achieve the outsourcing objectives of winning, running and renewing...

  18. Training for New Manufacturing Technologies.

    Science.gov (United States)

    Jacobs, James

    1988-01-01

    Examines the effects of computer-based manufacturing technologies on employment opportunities and job skills. Describes the establishment of the Industrial Technology Institute in Michigan to develop and utilize advanced manufacturing technologies, and the institute's relationship to the state's community colleges. Reviews lessons learned from…

  19. 75 FR 30781 - Manufacturing Council

    Science.gov (United States)

    2010-06-02

    ... convenience. Pending applicants remain under consideration and do not need to resubmit their applications..., particularly seeking the representation of small- and medium-sized enterprises. Additional factors which may be... marketing programs in support of manufacturing industries, job creation in the manufacturing sector, or the...

  20. Numerical and Experimental Study of Ti6Al4V Components Manufactured Using Powder Bed Fusion Additive Manufacturing

    Science.gov (United States)

    Zielinski, Jonas; Mindt, Hans-Wilfried; Düchting, Jan; Schleifenbaum, Johannes Henrich; Megahed, Mustafa

    2017-12-01

    Powder bed fusion additive manufacturing of titanium alloys is an interesting manufacturing route for many applications requiring high material strength combined with geometric complexity. Managing powder bed fusion challenges, including porosity, surface finish, distortions and residual stresses of as-built material, is the key to bringing the advantages of this process to production main stream. This paper discusses the application of experimental and numerical analysis towards optimizing the manufacturing process of a demonstration component. Powder characterization including assessment of the reusability, assessment of material consolidation and process window optimization is pursued prior to applying the identified optima to study the distortion and residual stresses of the demonstrator. Comparisons of numerical predictions with measurements show good correlations along the complete numerical chain.

  1. Communication Strategies of the Chinese Dairy Industry Manufacturers to Rebuild Reputation and Maintain a Quality Relationship

    Directory of Open Access Journals (Sweden)

    Dashi Zhang

    2013-10-01

    Full Text Available After the Sanlu tainted milk powder crisis in China in 2008, the entire powdered milk manufacturing industry, and in many ways the food industry as a whole, faced a crisis of reputation and consumer confidence. Through a study of the organisation and public relationships of dairy companies, the crisis communication strategies they used, and how they cultivated relationships, this paper explores how companies within the milk industry rebuilt their reputations to a point where customers and other key elements of the public once again felt confident about their products. This study explores the organisation­-public relationships (OPRs cultivation strategies of the dairy companies and the communication strategies they used to rebuild the industry's reputation after the Sanlu crisis. The author interviewed dairy company personnel and consumers in China (N=18 and conducted secondary document research. The communication strategies that dairy companies used to maintain their relationship with the public are analysed. This study develops the theory of relationship management and provides suggestions for other companies to utilise should they face an industry crisis in the future. The cultivation strategies the dairy companies use to maintain their relationship with the public is hard to separate from communication strategy employed after the crisis.

  2. New entrants and overcapacity: lessons from regional aircraft manufacturing

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.; Heerkens, Johannes M.G.

    2010-01-01

    The commercial aircraft manufacturing industry has been largely dominated by the advanced economies in North America and Western Europe. During recent decades, several emerging economies have invested heavily in the commercial aircraft industry, notably in regional aircraft manufacturing. This paper

  3. Rectal route in the 21st Century to treat children.

    Science.gov (United States)

    Jannin, Vincent; Lemagnen, Gilles; Gueroult, Pascale; Larrouture, Denis; Tuleu, Catherine

    2014-06-01

    The rectal route can be considered a good alternative to the oral route for the paediatric population because these dosage forms are neither to be swallowed nor need to be taste-masked. Rectal forms can also be administered in an emergency to unconscious or vomiting children. Their manufacturing cost is low with excipients generally regarded as safe. Some new formulation strategies, including mucoadhesive gels and suppositories, were introduced to increase patient acceptability. Even if recent paediatric clinical studies have demonstrated the equivalence of the rectal route with others, in order to enable the use of this promising route for the treatment of children in the 21st Century, some effort should be focused on informing and educating parents and care givers. This review is the first ever to address all the aforementioned items, and to list all drugs used in paediatric rectal forms in literature and marketed products in developed countries. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. China’s wood furniture manufacturing industry: industrial cluster and export competitiveness

    OpenAIRE

    Yang, hongqiang; Ji, Chunyi; Nie, Ning; Hong, Yinxing

    2012-01-01

    China is the largest furniture exporter in the world. Its wood furniture industry has become an important part of the country’s forestry economic development. Hence, investigating China’s furniture industry cluster and export competitiveness is favorable for the sustainable development of China’s forestry industry. This study indicates that, under the guidance of the export-oriented strategy of China’s reform and opening up for 30 years, the country’s furniture industry has formed three big i...

  5. Integration of Sensor and Actuator Networks and the SCADA System to Promote the Migration of the Legacy Flexible Manufacturing System towards the Industry 4.0 Concept

    Directory of Open Access Journals (Sweden)

    Antonio José Calderón Godoy

    2018-05-01

    Full Text Available Networks of sensors and actuators in automated manufacturing processes are implemented using industrial fieldbuses, where automation units and supervisory systems are also connected to exchange operational information. In the context of the incoming fourth industrial revolution, called Industry 4.0, the management of legacy facilities is a paramount issue to deal with. This paper presents a solution to enhance the connectivity of a legacy Flexible Manufacturing System, which constitutes the first step in the adoption of the Industry 4.0 concept. Such a system includes the fieldbus PROcess FIeld BUS (PROFIBUS around which sensors, actuators, and controllers are interconnected. In order to establish effective communication between the sensors and actuators network and a supervisory system, a hardware and software approach including Ethernet connectivity is implemented. This work is envisioned to contribute to the migration of legacy systems towards the challenging Industry 4.0 framework. The experimental results prove the proper operation of the FMS and the feasibility of the proposal.

  6. The Production, Value, and Reduction Responsibility of Carbon Emissions through Electricity Consumption of Manufacturing Industries in South Korea and Thailand

    Science.gov (United States)

    Kitikun, Medhawin

    This dissertation provides a new method of measuring efforts by manufacturing industries to reduce their emissions by curtailing electricity consumption. Employing comprehensive firm-level data from the National Manufacture Annual Surveys of South Korea and Thailand, I construct the measure from estimates of revenue functions by industry. The data consists of firms from more than 20 industries in each year from 1982 to 2005 for Korea and from 2001 to 2008 for Thailand. With a total of more than two million observations, I estimate revenue functions for each industry and year. Here, I use three inputs: number of employees(L), fixed asset stock(K), and electricity consumption(E) and two types of functional forms to represent each industry's revenue function. Second, under market competitive condition, I find that profit maximizing firms deviated their level of electricity usage in production from the profit-maximizing level during the time period for both countries, and I develop a theoretical framework to explain this behavior. Then, I tested the theory using my empirical models. Results support the notion of a hidden environmental value expressed by firms in the form of voluntary deviations from profit-maximizing levels of input demand. The measure used is the gap between the marginal revenue product of electricity and its price. This gap should increase with income, consistent with the Environmental Kuznets Curve literature. My current model provides considerable support for this proposition. Estimates indicate, in most industries, a negative relationship between per-capita income and emissions. In the final section of the dissertation, I consider the equitable distribution of emissions reduction burden under an international agreement such as the reduction effort, Kyoto Protocol. Both developed and developing countries have to cut their emissions to a specific reduction percentage target. Domestically, I present two extreme scenarios. In the first scenario

  7. Advanced manufacturing technologies for improved competitiveness of the South African manufacturing industry

    CSIR Research Space (South Africa)

    Tlale, NS

    2008-11-01

    Full Text Available In this paper the manufacturing environment with regards to technology and market is discussed. Both the South African and global view are given, together with technology management strategies. Value added products are described and determined...

  8. 2014 Joint Conference on Mechanical Design Engineering and Advanced Manufacturing

    CERN Document Server

    Daidie, Alain; Eynard, Benoit; Paredes, Manuel

    2016-01-01

    Covering key topics in the field such as technological innovation, human-centered sustainable engineering and manufacturing, and manufacture at a global scale in a virtual world, this book addresses both advanced techniques and industrial applications of key research in interactive design and manufacturing. Featuring the full papers presented at the 2014 Joint Conference on Mechanical Design Engineering and Advanced Manufacturing, which took place in June 2014 in Toulouse, France, it presents recent research and industrial success stories related to implementing interactive design and manufacturing solutions.

  9. A multi-objective location routing problem using imperialist competitive algorithm

    Directory of Open Access Journals (Sweden)

    Amir Mohammad Golmohammadi

    2016-06-01

    Full Text Available Nowadays, most manufacturing units try to locate their requirements and the depot vehicle routing in order to transport the goods at optimum cost. Needless to mention that the locations of the required warehouses influence on the performance of vehicle routing. In this paper, a mathematical programming model to optimize the storage location and vehicle routing are presented. The first objective function of the model minimizes the total cost associated with the transportation and storage, and the second objective function minimizes the difference distance traveled by vehicles. The study uses Imperialist Competitive Algorithm (ICA to solve the resulted problems in different sizes. The preliminary results have indicated that the proposed study has performed better than NSGA-II and PAES methods in terms of Quality metric and Spacing metric.

  10. STUDY ON THE USAGE OF SPECIAL MATERIALS FOR HIGH-STRENGTH PARTS USED IN THE MACHINES MANUFACTURING INDUSTRY

    Directory of Open Access Journals (Sweden)

    BIBU Marius

    2016-09-01

    Full Text Available Whereas formerly metallic materials were used extensively and for various purposes in the machines manufacturing industry, nowadays new materials are sought that can replace the "conventional" machines manufacturing materials with new ones. This is especially challenging in areas where parts need to be able to withstand very tough conditions, such as high temperatures or large forces applied to them. The current paper intends to analyze some of the most widely used materials for high-strength applications. A special focus in this regard is on the one hand in fiber-reinforced composite materials with the polymer matrix and on the other hand on basalt. The most important properties, processing technologies and applications of these materials are analyzed and discussed and conclusions are drawn regarding their compatibility with the intended purpose.

  11. An Exploratory Study on Implementation of Lean Manufacturing Practices(With Special Reference to Automobile Sector Industry(Yalın İmalat Faaliyetine Yönelik Bir Uygulama (Otomobil Endüstrisi Örneği

    Directory of Open Access Journals (Sweden)

    Er. Rajesh Kumar MEHTA

    2012-01-01

    Full Text Available At present scenario, Lean Manufacturing has become a world wide phenomenon. It is quite successful in drawing the attention of companies of all sizes. A large number of organizations are following Lean technologies and experiencing vast improvements in quality, production, customer service, and profitability. Lean Manufacturing is a systematic approach to identifying and eliminating waste through continuous improvement. The manufacturing industry in India must also look to leverage its advantages, its large domestic market, good conditions in terms of raw materials and skilled labour, and the quality focus. In India at the state level, there are few companies that are implementing Lean manufacturing techniques. In Dewas city, the industrial town of Madhya Pradesh, some of the automobile companies are vigorously following the Lean manufacturing techniques to eliminate waste and downsize the cost. Hence, all these factors prompted the researchers to analyze and study the implication of Lean Manufacturing Practices in Automobile Industries.

  12. Japan's technology and manufacturing infrastructure

    Science.gov (United States)

    Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

    1995-02-01

    The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

  13. Manufacturing consumption of energy 1991

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

  14. Measure of manufacturing performance in advanced manufacturing systems

    NARCIS (Netherlands)

    Ron, de A.J.

    1995-01-01

    Because of the financial risks as a result of the high investments, decisions concerning investing in advanced manufacturing systems are difficult. The difficulty to decide is gained by the lack of a well-defined measure to support decisions and alarming messages from the industry concerning inverse

  15. Health hazards of child labor in the leather products and surgical instrument manufacturing industries of Sialkot, Pakistan.

    Science.gov (United States)

    Junaid, Muhammad; Malik, Riffat Naseem; Pei, De-Sheng

    2017-07-01

    Child labor is a major challenge in the developing countries and comprehensive health hazard identification studies on this issue are still lacking. Therefore, the current study is an effort to highlight the health concerns of child labor exposed in the key small scale industries of Sialkot, Pakistan. Our findings revealed jolting levels of heavy metals in the urine, blood, serum, saliva, and hair samples collected from the exposed children. For example, in the urine samples, Cd, Cr, Ni, and Pb were measured at the respective concentrations of 39.17, 62.02, 11.94 and 10.53 μg/L in the surgical industries, and 2.10, 4.41, 1.04 and 5.35 μg/L in the leather industries. In addition, source apportionment revealed polishing, cutting, and welding sections in the surgical industries and surface coating, crusting, and stitching sections in the leather industries were the highest contributors of heavy metals in the bio-matrices of the exposed children, implying the dusty, unhygienic, and unhealthy indoor working conditions. Further, among all the bio-matrices, the hair samples expressed the highest bioaccumulation factor for heavy metals. In accordance with the heavy metal levels reported in the exposed children, higher oxidative stress was found in the children working in the surgical industries than those from the leather industries. Moreover, among heavy metals' exposure pathways, inhalation of industrial dust was identified as the primary route of exposure followed by the ingestion and dermal contact. Consequently, chemical daily intake (CDI), carcinogenic and non-carcinogenic hazard quotients (HQs) of heavy metals were also reported higher in the exposed children and were also alarmingly higher than the corresponding US EPA threshold limits. Taken all together, children were facing serious health implications in these industries and need immediate protective measures to remediate the current situation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Scope of Value Stream Mapping to Initiate Lean Manufacturing: An Analysis in the Apparel Industry of Bangladesh

    Directory of Open Access Journals (Sweden)

    Mimnun Sultana

    2013-06-01

    Full Text Available Recently, Bangladesh readymade garments sector has started the trend of implementing ‘lean manufacturing’. To remain competitive in the global market the most important task for garments industry is to reduce the lead time which is also important for long-term stable development. A headlong rush to reduce lead time by becoming lean has created urgency for researchers and practitioners to apply new tools and techniques for dictating wastages. This research addresses the application of value stream mapping in garments industry to implement lean manufacturing. Value stream mapping is different than conventional recording approaches as it helps in the visualization of Material Flow, Information Flow, cycle times and utilization of resources. With the assurance of effective integration and communication, lean systems can be achieved with better efficiency. This research will stand as a benchmark to implement lean for other garment industries in Bangladesh.

  17. Factors associated with the burnout syndrome among professionals in pharmaceutical manufacturing industry and marketing 1234

    Directory of Open Access Journals (Sweden)

    Jovanović Vesna R.

    2017-01-01

    Full Text Available Certain authors describe some professions in the healthcare industry as the more susceptible ones to developing a burnout syndrome, while others suggest psychosocial aspects of the workplace as the primary cause in its creation, but not the aspects of the job itself. The main objective of the research was to investigate which specific factors were associated with the burnout syndrome among professionals working in pharmaceutical manufacturing industry and marketing. The study was conducted in June of 2016 as a cross-sectional study and it included 75 university educated professionals from the area of pharmaceutical industry and marketing employed in several local as well as internationally renowned pharmaceutical companies located in Belgrade. The participants were surveyed anonymously. The instruments used in the study were: a general socio-demographic questionnaire, an assertiveness self-evaluation questionnaire and the Maslach Burnout Inventory. An analysis of the responses in the burnout syndrome self-evaluation questionnaires showed that the highest level of burnout was expressed through reduced personal accomplishment (53%. The average assertiveness scores were the lowest in the individuals who demonstrated the highest level of emotional exhaustion (p=0.003, depersonalization (p=0.004, and the highest inefficiency on professional accomplishment scale (p=0.001. A statistically significant difference was observed in frequency and extent of emotional exhaustion with respect to respondents' gender (x2=10.779; p<0.05, as well as the line of business (x2=6.493; p<0.05. Levels of depersonalization are influenced by: line of work (x2=5.393; p<0.05, age (p=0.004, total years of service (p=0.009 and years of service in the profession (p=0.006. A sense of reduced personal accomplishment is influenced by a respondents' profession (x2=10.922; p<0.05 and line of business (x2=7.283; p<0.05. The results obtained in this study might help in identifying

  18. Designing Integrated Product- Service System Solutions in Manufacturing Industries

    DEFF Research Database (Denmark)

    Costa, Nina; Patrício, Lia; Morelli, Nicola

    2015-01-01

    Manufacturing firms are increasingly evolving towards the design of integrated product-service solutions but servitization literature does not provide specific guidance on how to design these integrated solutions. Building upon ProductService System (PSS) and Service Design (SD) approaches...... how it brings new insights to manufacturing companies moving to a service, value cocreation perspective....

  19. Aircraft, Missile, and Spacecraft; Office Machine and Computer; Electronics; and Motor Vehicle and Equipment Manufacturing Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

    Science.gov (United States)

    Bureau of Labor Statistics (DOL), Washington, DC.

    Focusing on occupations in various manufacturing industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include occupations in…

  20. Technology Innovation and Future Research Needs in Net Shape Manufacturing

    International Nuclear Information System (INIS)

    Yang, Dong-Yol

    2005-01-01

    The rapid change in customer needs and industrial environment has demanded innovations in the manufacturing sector. Metal forming industries have been confronted with new challenges of innovations in products, processes, machines, materials and production systems. From the viewpoints of competitiveness of products, new paradigms are required for innovation in manufacturing, especially in net shape manufacturing. Product innovations are increasingly put under emphasis beyond manufacturing innovations based on the holistic concurrent engineering approach. The presentation covers not only the innovation methodologies, but also the innovation directions in net shape manufacturing

  1. Real-time slicing algorithm for Stereolithography (STL) CAD model applied in additive manufacturing industry

    Science.gov (United States)

    Adnan, F. A.; Romlay, F. R. M.; Shafiq, M.

    2018-04-01

    Owing to the advent of the industrial revolution 4.0, the need for further evaluating processes applied in the additive manufacturing application particularly the computational process for slicing is non-trivial. This paper evaluates a real-time slicing algorithm for slicing an STL formatted computer-aided design (CAD). A line-plane intersection equation was applied to perform the slicing procedure at any given height. The application of this algorithm has found to provide a better computational time regardless the number of facet in the STL model. The performance of this algorithm is evaluated by comparing the results of the computational time for different geometry.

  2. The impact of manufacturing complexity drivers on performance-a preliminary study

    Science.gov (United States)

    Huah Leang, Suh; Mahmood, Wan Hasrulnizzam Wan; Rahman, Muhamad Arfauz A.

    2018-03-01

    Manufacturing systems, in pursuit of cost, time and flexibility optimisation are becoming more and more complex, exhibiting a dynamic and nonlinear behaviour. Unpredictability is a distinct characteristic of such behaviour and effects production planning significantly. Therefore, this study was undertaken to investigate the priority level and current achievement of manufacturing performance in Malaysia’s manufacturing industry and the complexity drivers on manufacturing productivity performance. The results showed that Malaysia’s manufacturing industry prioritised product quality and they managed to achieve a good on time delivery performance. However, for other manufacturing performance, there was a difference where the current achievement of manufacturing performances in Malaysia’s manufacturing industry is slightly lower than the priority given to them. The strong correlation of significant value for priority status was observed between efficient production levelling (finished goods) and finish product management while the strong correlation of significant value for current achievement was minimised the number of workstation and factory transportation system. This indicates that complexity drivers have an impact towards manufacturing performance. Consequently, it is necessary to identify complexity drivers to achieve well manufacturing performance.

  3. Decision making in the manufacturing environment using graph theory and fuzzy multiple attribute decision making methods

    CERN Document Server

    Rao, Ravipudi Venkata

    2007-01-01

    Manufacturing is the backbone of any industrialized nation. Recent worldwide advances in manufacturing technologies have brought about a metamorphism in the industry. Fast-changing technologies on the product front have created a need for an equally fast response from manufacturing industries. To meet these challenges, manufacturing industries have to select appropriate manufacturing strategies, product designs, manufacturing processes, work piece and tool materials, and machinery and equipment. The selection decisions are complex as decision making is more challenging today. Decision makers i

  4. The Influence of Intrinsic and Extrinsic Rewards on Employee Results: An Empirical Analysis in Turkish Manufacturing Industry

    OpenAIRE

    Ozutku, Hatice

    2012-01-01

    The study discussed in this article questions whether certain reward practices used by organizations are better than others when comparing the employee results based on TQM. We first examine reward systems and TQM relevant literature. After related literature review, reward practices have been handled in two groups as intrinsic rewards and extrinsic rewards. In the sample, which consists of 217 businesses that operate in Turkish manufacturing industry and apply TQM, intrinsic and extrinsic re...

  5. Nuclear industry will soon surface

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    The Japan Atomic Industrial Forum has carried out the annual survey of nuclear industry from the very inception of the development of nuclear power in Japan. The aim is to research and analyze nuclear-related expenditures, sales and manpower, as well as the future prospect of mining and manufacturing industries, electric utilities, trading companies and other related industries. The 19th fact-finding survey investigated into the actual conditions of the nuclear industry from April, 1977, to March, 1978. The number of companies surveyed increased by 75 from the previous year to 1,244, of which 883 or 71% responded to the questions. 501 companies did the business in the field of nuclear power. The first thing to be pointed out about the economic conditions of the nuclear industry is that the nuclear related expenditures increased in electric utilities, mining and manufacturing industries and trading companies, and exceeded 1 trillion yen mark for the first time in the private sector. It is likely that the current nuclear-related activities of mining and manufacturing industries will soon increase, but it will not be easy to wipe off the cumulative deficit of the industries. The employees increased by more than 7% in the nuclear-related sectors of electric utilities and mining and manufacturing industries. The facilities of nuclear supply industry were operated at the average rate of 50%. (Kako, I.)

  6. Industrial sector-based volatile organic compound (VOC) source profiles measured in manufacturing facilities in the Pearl River Delta, China.

    Science.gov (United States)

    Zheng, Junyu; Yu, Yufan; Mo, Ziwei; Zhang, Zhou; Wang, Xinming; Yin, Shasha; Peng, Kang; Yang, Yang; Feng, Xiaoqiong; Cai, Huihua

    2013-07-01

    Industrial sector-based VOC source profiles are reported for the Pearl River Delta (PRD) region, China, based source samples (stack emissions and fugitive emissions) analyzed from sources operating under normal conditions. The industrial sectors considered are printing (letterpress, offset and gravure printing processes), wood furniture coating, shoemaking, paint manufacturing and metal surface coating. More than 250 VOC species were detected following US EPA methods TO-14 and TO-15. The results indicated that benzene and toluene were the major species associated with letterpress printing, while ethyl acetate and isopropyl alcohol were the most abundant compounds of other two printing processes. Acetone and 2-butanone were the major species observed in the shoemaking sector. The source profile patterns were found to be similar for the paint manufacturing, wood furniture coating, and metal surface coating sectors, with aromatics being the most abundant group and oxygenated VOCs (OVOCs) as the second largest contributor in the profiles. While OVOCs were one of the most significant VOC groups detected in these five industrial sectors in the PRD region, they have not been reported in most other source profile studies. Such comparisons with other studies show that there are differences in source profiles for different regions or countries, indicating the importance of developing local source profiles. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.

  7. Risk management strategy to increase the safety of workers in the nanomaterials industry

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Min-Pei, E-mail: lingmp@mail.cmu.edu.tw [Department of Health Risk Management, China Medical University, Taichung 40402, Taiwan, ROC (China); Lin, Wei-Chao; Liu, Chia-Chyuan [Department of Cosmetic Science, Chia Nan University of Pharmacy and Science, Tainan 71710, Taiwan, ROC (China); Huang, Yi-Shiao; Chueh, Miao-Ju [Industrial Safety and Health Association of the ROC, Taipei 11670, Taiwan, ROC (China); Shih, Tung-Sheng [Institute of Occupational Safety and Health, Council of Labor Affairs, Taipei 22143, Taiwan, ROC (China)

    2012-08-30

    Highlights: Black-Right-Pointing-Pointer On-site assessment of nanomaterials using physiochemical and cytotoxic analysis can help identify risks for each nanomaterials manufacturing plant. Black-Right-Pointing-Pointer The risk of the nanomaterials manufacturing plants can be divided into three levels based on exposure routes (tier 1), aspect identification (tier 2), and toxicological screening (tier 3). Black-Right-Pointing-Pointer According to the different risk levels, the precautionary risk management (PRM) such as technology control, engineering control, and personal protective equipment were applied. Black-Right-Pointing-Pointer The PRM strategy can be effectively reduced workers risks for nanomaterial industries. - Abstract: In recent years, many engineered nanomaterials (NMs) have been produced, but increasing research has revealed that these may have toxicities far greater than conventional materials and cause significant adverse health effects. At present, there is insufficient data to determine the permissible concentrations of NMs in the workplace. There is also a lack of toxicity data and environmental monitoring results relating to complete health risk assessment. In view of this, we believe that workers in the NMs industry should be provided with simple and practical risk management strategy to ensure occupational health and safety. In this study, we developed a risk management strategy based on the precautionary risk management (PRM). The risk of the engineered NMs manufacturing plants can be divided into three levels based on aspect identification, solubility tests, dermal absorption, and cytotoxic analyses. The risk management strategies include aspects relating to technology control, engineering control, personal protective equipment, and monitoring of the working environment for each level. Here we report the first case in which a simple and practical risk management strategy applying in specific engineered NMs manufacturing plants. We are

  8. Risk management strategy to increase the safety of workers in the nanomaterials industry

    International Nuclear Information System (INIS)

    Ling, Min-Pei; Lin, Wei-Chao; Liu, Chia-Chyuan; Huang, Yi-Shiao; Chueh, Miao-Ju; Shih, Tung-Sheng

    2012-01-01

    Highlights: ► On-site assessment of nanomaterials using physiochemical and cytotoxic analysis can help identify risks for each nanomaterials manufacturing plant. ► The risk of the nanomaterials manufacturing plants can be divided into three levels based on exposure routes (tier 1), aspect identification (tier 2), and toxicological screening (tier 3). ► According to the different risk levels, the precautionary risk management (PRM) such as technology control, engineering control, and personal protective equipment were applied. ► The PRM strategy can be effectively reduced workers risks for nanomaterial industries. - Abstract: In recent years, many engineered nanomaterials (NMs) have been produced, but increasing research has revealed that these may have toxicities far greater than conventional materials and cause significant adverse health effects. At present, there is insufficient data to determine the permissible concentrations of NMs in the workplace. There is also a lack of toxicity data and environmental monitoring results relating to complete health risk assessment. In view of this, we believe that workers in the NMs industry should be provided with simple and practical risk management strategy to ensure occupational health and safety. In this study, we developed a risk management strategy based on the precautionary risk management (PRM). The risk of the engineered NMs manufacturing plants can be divided into three levels based on aspect identification, solubility tests, dermal absorption, and cytotoxic analyses. The risk management strategies include aspects relating to technology control, engineering control, personal protective equipment, and monitoring of the working environment for each level. Here we report the first case in which a simple and practical risk management strategy applying in specific engineered NMs manufacturing plants. We are confident that our risk management strategy can be effectively reduced engineered NM industries risks for

  9. Northwest Manufacturing Initiative

    Science.gov (United States)

    2014-07-31

    biodegradable wipes, and bags. The gStyle clothing line consists of various types of stylish clothes for babies. All gDiapers are plastic free...offers recycling services for industrial plastics and non-serviceable containers. Industrial plastics include pails, buckets, pallets, plastic film, and...manufacturer, now recycle used soda bottles, unusable second quality fabrics and worn out garments into polyester fibers to produce many of their clothes

  10. Human factors in agile manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Forsythe, C.

    1995-03-01

    As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.

  11. Drivers and barriers to e-invoicing adoption in Greek large scale manufacturing industries

    Energy Technology Data Exchange (ETDEWEB)

    Marinagi, Catherine, E-mail: marinagi@teihal.gr, E-mail: ptrivel@yahoo.com, E-mail: preklitis@yahoo.com; Trivellas, Panagiotis, E-mail: marinagi@teihal.gr, E-mail: ptrivel@yahoo.com, E-mail: preklitis@yahoo.com; Reklitis, Panagiotis, E-mail: marinagi@teihal.gr, E-mail: ptrivel@yahoo.com, E-mail: preklitis@yahoo.com [Technological Educational Institute of Sterea Ellada, Department of Logistics management, 1st km of Old National Road Thiva-Elefsis-32200, Thiva (Greece); Skourlas, Christos, E-mail: cskourlas@teiath.gr [Technological Educational Institute of Athens, Department of Informatics, Ag. Spyridonos, Aigaleo-12210, Athens (Greece)

    2015-02-09

    This paper attempts to investigate the drivers and barriers that large-scale Greek manufacturing industries experience in adopting electronic invoices (e-invoices), based on three case studies with organizations having international presence in many countries. The study focuses on the drivers that may affect the increase of the adoption and use of e-invoicing, including the customers demand for e-invoices, and sufficient know-how and adoption of e-invoicing in organizations. In addition, the study reveals important barriers that prevent the expansion of e-invoicing, such as suppliers’ reluctance to implement e-invoicing, and IT infrastructures incompatibilities. Other issues examined by this study include the observed benefits from e-invoicing implementation, and the financial priorities of the organizations assumed to be supported by e-invoicing.

  12. Drivers and barriers to e-invoicing adoption in Greek large scale manufacturing industries

    International Nuclear Information System (INIS)

    Marinagi, Catherine; Trivellas, Panagiotis; Reklitis, Panagiotis; Skourlas, Christos

    2015-01-01

    This paper attempts to investigate the drivers and barriers that large-scale Greek manufacturing industries experience in adopting electronic invoices (e-invoices), based on three case studies with organizations having international presence in many countries. The study focuses on the drivers that may affect the increase of the adoption and use of e-invoicing, including the customers demand for e-invoices, and sufficient know-how and adoption of e-invoicing in organizations. In addition, the study reveals important barriers that prevent the expansion of e-invoicing, such as suppliers’ reluctance to implement e-invoicing, and IT infrastructures incompatibilities. Other issues examined by this study include the observed benefits from e-invoicing implementation, and the financial priorities of the organizations assumed to be supported by e-invoicing

  13. Manufacture and characterization of mucoadhesive buccal films.

    Science.gov (United States)

    Morales, Javier O; McConville, Jason T

    2011-02-01

    The buccal route of administration has a number of advantages including bypassing the gastrointestinal tract and the hepatic first pass effect. Mucoadhesive films are retentive dosage forms and release drug directly into a biological substrate. Furthermore, films have improved patient compliance due to their small size and reduced thickness, compared for example to lozenges and tablets. The development of mucoadhesive buccal films has increased dramatically over the past decade because it is a promising delivery alternative to various therapeutic classes including peptides, vaccines, and nanoparticles. The "film casting process" involves casting of aqueous solutions and/or organic solvents to yield films suitable for this administration route. Over the last decade, hot-melt extrusion has been explored as an alternative manufacturing process and has yielded promising results. Characterization of critical properties such as the mucoadhesive strength, drug content uniformity, and permeation rate represent the major research areas in the design of buccal films. This review will consider the literature that describes the manufacture and characterization of mucoadhesive buccal films. Copyright © 2010 Elsevier B.V. All rights reserved.

  14. Handbook of manufacturing engineering and technology

    CERN Document Server

    2015-01-01

    The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.

  15. Methods for recovering precious metals from industrial waste

    Science.gov (United States)

    Canda, L.; Heput, T.; Ardelean, E.

    2016-02-01

    The accelerated rate of industrialization increases the demand for precious metals, while high quality natural resources are diminished quantitatively, with significant operating costs. Precious metals recovery can be successfully made from waste, considered to be secondary sources of raw material. In recent years, concerns and interest of researchers for more increasing efficient methods to recover these metals, taking into account the more severe environmental protection legislation. Precious metals are used in a wide range of applications, both in electronic and communications equipment, spacecraft and jet aircraft engines and for mobile phones or catalytic converters. The most commonly recovered precious metals are: gold from jewellery and electronics, silver from X- ray films and photographic emulsions, industrial applications (catalysts, batteries, glass/mirrors), jewellery; platinum group metals from catalytic converters, catalysts for the refining of crude oil, industrial catalysts, nitric acid manufacturing plant, the carbon-based catalyst, e-waste. An important aspect is the economic viability of recycling processes related to complex waste flows. Hydrometallurgical and pyrometallurgical routes are the most important ways of processing electrical and electronic equipment waste. The necessity of recovering precious metals has opened new opportunities for future research.

  16. Manufacturing routes for disposable polymer blood diagnostic microfluidic systems

    DEFF Research Database (Denmark)

    Tosello, Guido; Griffiths, Christian; Azcarate, Sabino

    2008-01-01

    (Multi-Material Micro Manufacture) that are relevant to the technology for disposable polymer parts for Micro-Tele-BioChip (µTBC) medical platforms. Combining two separation mechanisms a novel micro channel design was developed. The separation unit is based on a micro channel bend structure where typical...... channel dimensions are 20 µm for the plasma channel width, and 50-75 µm for the cell channel. The height of all channels is 100 µm. The micro channel bend works simply on physical and hydrodynamic separation mechanisms without integrated actuators like pumps or valves. For the mass-fabrication of low...

  17. Innovative approaches in the manufacture of zirconium alloy components for PHWRs

    International Nuclear Information System (INIS)

    Rao, M.N.; Srivastava, R.K.

    2005-01-01

    Selection of an appropriate route for the fabrication of Zirconium alloy fuel components has a direct bearing on the quality of finished product. Many sophisticated and intricate processes such as vacuum arc melting, extrusion, hot rolling and cold working processes - swaging, drawing and sheet rolling are employed. Many advances were made in eddy current and ultrasonic evaluation to meet the stringent quality control requirement and locate the micro flaws. Emphasis was laid on achieving high recoveries and manufacture the product at minimum cost. Several creative and innovative processes were adopted particularly in the fabrication of end caps and spacers. The spacers were produced through the wire route and subsequently parting them into tiny spacers, which is entirely different from the conventional route of fabricating the sheets followed by blanking and coining. This has improved the material recovery and the lead time has been reduced substantially. The end caps used for the closure of clad tubes have to meet the most stringent quality requirements to avoid micro-flaws. The manufacturing processes adopted have direct influence on the integrity of the finished product. Special defect standards were developed to identify and eliminate micro-flaws and thereby ensure consistent and repetitive quality product. The paper brings out the above innovative approaches made in fabrication and quality control techniques in the manufacture of fuel components for PHWR fuel bundles. (author)

  18. ACTIVITY-BASED COSTING DAN SIMULATED ANNEALING UNTUK PENCARIAN RUTE PADA FLEXIBLE MANUFACTURING SYSTEMS

    OpenAIRE

    Gregorius Satia Budhi

    2003-01-01

    Flexible Manufacturing System (FMS) is a manufacturing system that is formed from several Numerical Controlled Machines combine with material handling system, so that different jobs can be worked by different machines sequences. FMS combine the high productivity and flexibility of Transfer Line and Job Shop manufacturing system. In this reasearch, Activity-Based Costing(ABC) approach was used as the weight to search the operation route in the proper machine, so that the total production cost ...

  19. Benefits from the U.S. photovoltaic manufacturing technology project

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, R.L.; Witt, C.E.; Thomas, H.P. [National Renewable Energy Lab., Golden, CO (United States)] [and others

    1996-05-01

    This paper examines the goals of the Photovoltaic Manufacturing Technology (PVMaT) project and its achievements in recapturing the investment by the photovoltaic (PV) industry and the public in this research. The PVMaT project was initiated in 1990 with the goal of enhancing the world-wide competitiveness of the U.S. PV industry. Based on the authors analysis, PVMaT has contributed to PV module manufacturing process improvements, increased product value, and reductions in the price of today`s PV products. An evaluation of success in this project was conducted using data collected from 10 of the PVMaT industrial participants in late fiscal year (FY) 1995. These data indicate a reduction of 56% in the weighted average module manufacturing costs from 1992 to 1996. During this same period, U.S. module manufacturing capacity has increased by more than a factor of 6. Finally, the analysis indicates that both the public and the manufacturers will recapture the funds expended in R&D manufacturing improvements well before the year 2000.

  20. PREFACE: Trends in Aerospace Manufacturing 2009 International Conference

    Science.gov (United States)

    Ridgway, Keith; Gault, Rosemary; Allen, Adrian

    2011-12-01

    The aerospace industry is rapidly changing. New aircraft structures are being developed and aero-engines are becoming lighter and more environmentally friendly. In both areas, innovative materials and manufacturing methods are used in an attempt to get maximum performance for minimum cost. At the same time, the structure of the industry has changed and there has been a move from large companies designing, manufacturing components and assembling aircraft to one of large global supply chains headed by large system integrators. All these changes have forced engineers and managers to bring in innovations in design, materials, manufacturing technologies and supply chain management. In September 2009, the Advanced Manufacturing Research Centre (AMRC) at the University of Sheffield held the inaugural Trends in Aerospace Manufacturing conference (TRAM09). This brought together 28 speakers over two days, who presented in sessions on advanced manufacturing trends for the aerospace sector. Areas covered included new materials, including composites, advanced machining, state of the art additive manufacturing techniques, assembly and supply chain issues.

  1. Ergonomics issues among sewing machine operators in the textile manufacturing industry in Botswana.

    Science.gov (United States)

    Sealetsa, O J; Thatcher, A

    2011-01-01

    Universally musculoskeletal disorders are among the leading causes of low productivity in today's work environment. The situation is reportedly even worse in developing countries with appalling working conditions in many industries. In addition, there is often an acute lack of awareness of ergonomics issues, education and training programmes, and certification within developing countries. Numerous studies internationally have highlighted musculoskeletal risk factors associated with the textile industry and garment-making jobs because of highly repetitive work in awkward work postures. The objective of this study was to identify and describe possible ergonomics deficiencies in the workstation of sewing machine operators in a textile industry in Botswana as well as their perception of workload and bodily discomfort. This study focused on one textile manufacturing factory in Botswana where 157 female sewing machine operators were recruited as participants. A modified Corlett and Bishop body map questionnaire and the NASA TLX were administered and relevant anthropometric and workplace layout measurements were collected. The results of the study revealed a high prevalence of musculoskeletal disorders. Back, neck and shoulder discomfort are highly prevalent among these sewing machine operators. This study proposes intervention strategies including the re-design of the workstations and seating and the provision of training in basic ergonomics principles for improving the work-life of these operators and provides a base for further research on the prevalence of musculoskeletal disorders among sewing machine operators in developing countries.

  2. Collaborative Manufacturing for Small-Medium Enterprises

    Science.gov (United States)

    Irianto, D.

    2016-02-01

    Manufacturing systems involve decisions concerning production processes, capacity, planning, and control. In a MTO manufacturing systems, strategic decisions concerning fulfilment of customer requirement, manufacturing cost, and due date of delivery are the most important. In order to accelerate the decision making process, research on decision making structure when receiving order and sequencing activities under limited capacity is required. An effective decision making process is typically required by small-medium components and tools maker as supporting industries to large industries. On one side, metal small-medium enterprises are expected to produce parts, components or tools (i.e. jigs, fixture, mold, and dies) with high precision, low cost, and exact delivery time. On the other side, a metal small- medium enterprise may have weak bargaining position due to aspects such as low production capacity, limited budget for material procurement, and limited high precision machine and equipment. Instead of receiving order exclusively, a small-medium enterprise can collaborate with other small-medium enterprise in order to fulfill requirements high quality, low manufacturing cost, and just in time delivery. Small-medium enterprises can share their best capabilities to form effective supporting industries. Independent body such as community service at university can take a role as a collaboration manager. The Laboratory of Production Systems at Bandung Institute of Technology has implemented shared manufacturing systems for small-medium enterprise collaboration.

  3. ACTIVITY-BASED COSTING DAN SIMULATED ANNEALING UNTUK PENCARIAN RUTE PADA FLEXIBLE MANUFACTURING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Gregorius Satia Budhi

    2003-01-01

    Full Text Available Flexible Manufacturing System (FMS is a manufacturing system that is formed from several Numerical Controlled Machines combine with material handling system, so that different jobs can be worked by different machines sequences. FMS combine the high productivity and flexibility of Transfer Line and Job Shop manufacturing system. In this reasearch, Activity-Based Costing(ABC approach was used as the weight to search the operation route in the proper machine, so that the total production cost can be optimized. The search method that was used in this experiment is Simulated Annealling, a variant form Hill Climbing Search method. An ideal operation time to proses a part was used as the annealling schedule. From the empirical test, it could be proved that the use of ABC approach and Simulated Annealing to search the route (routing process can optimize the Total Production Cost. In the other hand, the use of ideal operation time to process a part as annealing schedule can control the processing time well. Abstract in Bahasa Indonesia : Flexible Manufacturing System (FMS adalah sistem manufaktur yang tersusun dari mesin-mesin Numerical Control (NC yang dikombinasi dengan Sistem Penanganan Material, sehingga job-job berbeda dikerjakan oleh mesin-mesin dengan alur yang berlainan. FMS menggabungkan produktifitas dan fleksibilitas yang tinggi dari Sistem Manufaktur Transfer Line dan Job Shop. Pada riset ini pendekatan Activity-Based Costing (ABC digunakan sebagai bobot / weight dalam pencarian rute operasi pada mesin yang tepat, untuk lebih mengoptimasi biaya produksi secara keseluruhan. Adapun metode Searching yang digunakan adalah Simulated Annealing yang merupakan varian dari metode searching Hill Climbing. Waktu operasi ideal untuk memproses sebuah part digunakan sebagai Annealing Schedulenya. Dari hasil pengujian empiris dapat dibuktikan bahwa penggunaan pendekatan ABC dan Simulated Annealing untuk proses pencarian rute (routing dapat lebih

  4. The study and design of a national supply chain for the aerospace titanium components manufacturing industry

    Directory of Open Access Journals (Sweden)

    Lene van der Merwe

    2012-11-01

    Full Text Available Titanium’s strength-to-density ratio, corrosion resistance and high thermal compatibility makes it the perfect metal for aerospace. Titanium is for instance used for the structural airframe, seat tracks, engine components and landing gear of aircraft. The Boeing 787 that had its test flight in 2009 is one of the latest aircraft designs that incorporates a substantially higher percentage of parts manufactured from titanium due to the weight benefit. Titanium’s extensive use in aerospace applications ensures that the aerospace market is the main driver of titanium metal demand. South Africa is the second largest titanium producer in the world after Australia. The abundance of titanium in South Africa together with the growing demand has led it to be identified as a beneficiation priority in a collaborative government initiative, called Titanium Beneficiation Initiative (TBI. The purpose of this paper is to develop a supply chain model for the anticipated South African titanium component manufacturing industry.

  5. Alternative routes to olefins. Chances and challenges

    Energy Technology Data Exchange (ETDEWEB)

    Meiswinkel, A.; Delhomme, C.; Ponceau, M. [Linde AG, Pullach (Germany)

    2013-11-01

    In the future, conventional raw materials which are used for the production of olefins will get shorter and more expensive and alternative raw materials and production routes will gain importance. Natural gas, coal, shale oil or bio-mass are potential sources for the production of olefins, especially ethylene and propylene, as major base chemicals. Several potential production routes were already developed in the past, but cost, energy and environmental considerations might make these unattractive or unfeasible in comparison to traditional processes (e.g. steam cracking). Other processes such as methanol to olefins processes were successfully developed and first commercial units are running. In addition, combination of traditional processes (e.g. coal/biomass gasification, Fischer-Tropsch and steam cracking) might enable new pathways. Besides, dehydration of ethanol is opening direct routes from biomass to 'green' ethylene. However, for these 'bio-routes', feedstock availability and potential land use conflict with food production (sugar cane, wheat,..) still need to be evaluated. finally, new oxidative routes, including processes such as oxidative coupling of methane or oxidative dehydrogenation, are still at an early development stage but present potential for future industrial applications. (orig.) (Published in summary form only)

  6. Industrial Manufacturing Facilities, Located during MicroData field address collection 2004-2006. Kept in Spillman database for retrieval., Published in 2004, Vilas County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Industrial Manufacturing Facilities dataset current as of 2004. Located during MicroData field address collection 2004-2006. Kept in Spillman database for retrieval..

  7. Green manufacturing processes and systems

    Energy Technology Data Exchange (ETDEWEB)

    Davim, J. Paulo (ed.) [Aveiro Univ. (Portugal). Dept. of Mechanical Engineering, Campus Universitario de Santiago

    2013-02-01

    This book provides the recent advances on green manufacturing processes and systems for modern industry. Chapter 1 provides information on sustainable manufacturing through environmentally-friendly machining. Chapter 2 is dedicated to environmentally-friendly machining: vegetable based cutting fluids. Chapter 3 describes environmental-friendly joining of tubes. Chapter 4 contains information on concepts, methods and strategies for zero-waste in manufacturing. Finally, chapter 5 is dedicated to the application of hybrid MCDM approach for selecting the best tyre recycling process.

  8. Effects of Cost Factors on National Manufacturing Based on Global Perspectives

    Directory of Open Access Journals (Sweden)

    Fangtao Liu

    2017-11-01

    Full Text Available Currently, the real economy is the important basis for the development of a country, especially after the global financial crisis in 2008. Given that the manufacturing industry is the main part of the national real economy, many developed and developing countries have paid considerable attention to its significance. This study focused on cost factors given that they influence national manufacturing development. Initially, this study proposed two elements, namely, manufacturing development scale and manufacturing development level, to evaluate national manufacturing development from two aspects: quantity and quality. Subsequently, we extracted a series of cost factors on the bass of the theoretical framework and literature, including labor costs, financing costs, tax and rental costs, energy and raw materials, foreign trade exports and business environments. On the basis of the data of 13 main manufacturing countries around the world from 2000 to 2015, we tested the influence degree of each cost element index on the scale and level of national manufacturing industry development through a two-way fixed effects model and incorporated it with the development of China’s manufacturing industry as a case study. Finally, we deduced the future development trend of the manufacturing industry by specifically analyzing the cost factors affecting the development of this industry and provided policy suggestions. The main innovation and contribution of this study including: to comprehensively evaluate the national manufacturing development from two aspects, namely, “quantity” and “quality”; to identify the impact of national cost of the six elements; to demonstrate and determine the extent of its impact on the development trend of manufacturing sector and carry out pre-judgment through empirical research on each indicator; to provide policy recommendations targeted for each of the indicators.

  9. Industrial Penetration and Internet Intensity

    NARCIS (Netherlands)

    C-L. Chang (Chia-Lin); M.J. McAleer (Michael); Y-C. Wu (Yu-Chieh)

    2016-01-01

    textabstractThis paper investigates the effect of industrial penetration and internet intensity for Taiwan manufacturing firms, and analyses whether the relationships are substitutes or complements. The sample observations are based on 153,081 manufacturing plants, and covers 26 two-digit industry

  10. 76 FR 2832 - National Emission Standards for Hazardous Air Pollutants From the Portland Cement Manufacturing...

    Science.gov (United States)

    2011-01-18

    ... Cement Manufacturing Industry and Standards of Performance for Portland Cement Plants AGENCY...) from the Portland Cement Manufacturing Industry and Standards of Performance (NSPS) for Portland Cement... Standards for Hazardous Air Pollutant From the Portland Cement Manufacturing Industry Docket, Docket ID No...

  11. Energy efficiency solutions for driers used in the glass manufacturing and processing industry

    Directory of Open Access Journals (Sweden)

    Pătrașcu Roxana

    2017-07-01

    Full Text Available Energy conservation is relevant to increasing efficiency in energy projects, by saving energy, by its’ rational use or by switching to other forms of energy. The goal is to secure energy supply on short and long term, while increasing efficiency. These are enforced by evaluating the companies’ energy status, by monitoring and adjusting energy consumption and organising a coherent energy management. The manufacturing process is described, starting from the state and properties of the raw material and ending with the glass drying technological processes involved. Raw materials are selected considering technological and economic criteria. Manufacturing is treated as a two-stage process, consisting of the logistic, preparation aspect of unloading, transporting, storing materials and the manufacturing process itself, by which the glass is sifted, shredded, deferrized and dried. The interest of analyzing the latter is justified by the fact that it has a big impact on the final energy consumption values, hence, in order to improve the general performance, the driers’ energy losses are to be reduced. Technological, energy and management solutions are stated to meet this problem. In the present paper, the emphasis is on the energy perspective of enhancing the overall efficiency. The case study stresses the effects of heat recovery over the efficiency of a glass drier. Audits are conducted, both before and after its’ implementation, to punctually observe the balance between the entering and exiting heat in the drying process. The reduction in fuel consumption and the increase in thermal performance and fuel usage performances reveal the importance of using all available exiting heat from processes. Technical faults, either in exploitation or in management, lead to additional expenses. Improving them is in congruence with the energy conservation concept and is in accordance with the Energy Efficiency Improvement Program for industrial facilities.

  12. Estimating and Forecasting Production and Orders in Manufacturing Industry from Business Survey Data: Evidence from Switzerland, 1990-2003

    OpenAIRE

    Richard Etter; Michael Graff

    2003-01-01

    A fundamental issue for policy-oriented business cycle research is access to leading - or at least coincident - and reliable indicators of economic activity in manufacturing industry. Therefore, we analyse how the quickly disposable, qualitative information of the business tendency survey conducted by the Swiss Institute for Business Cycle Research (KOF) is related to the official production and order statistics of Switzerland. Pairs of high cross-correlations were selected for further analys...

  13. Towards Knowledge Management for Smart Manufacturing.

    Science.gov (United States)

    Feng, Shaw C; Bernstein, William Z; Hedberg, Thomas; Feeney, Allison Barnard

    2017-09-01

    The need for capturing knowledge in the digital form in design, process planning, production, and inspection has increasingly become an issue in manufacturing industries as the variety and complexity of product lifecycle applications increase. Both knowledge and data need to be well managed for quality assurance, lifecycle-impact assessment, and design improvement. Some technical barriers exist today that inhibit industry from fully utilizing design, planning, processing, and inspection knowledge. The primary barrier is a lack of a well-accepted mechanism that enables users to integrate data and knowledge. This paper prescribes knowledge management to address a lack of mechanisms for integrating, sharing, and updating domain-specific knowledge in smart manufacturing. Aspects of the knowledge constructs include conceptual design, detailed design, process planning, material property, production, and inspection. The main contribution of this paper is to provide a methodology on what knowledge manufacturing organizations access, update, and archive in the context of smart manufacturing. The case study in this paper provides some example knowledge objects to enable smart manufacturing.

  14. Exploring sustainable manufacturing principles and practices

    OpenAIRE

    Alayón, Claudia

    2016-01-01

    The manufacturing industry remains a critical force in the quest for global sustainability. An increasing number of companies are modifying their operations in favor of more sustainable practices. It is hugely important that manufacturers, irrespective of the subsector they belong to, or their organizational size, implement practices that reduce or eliminate negative environmental, social and economic impacts generated by their manufacturing operations. Consequently, scholars have called for ...

  15. Surrogate Final Technical Report for "Solar: A Photovoltaic Manufacturing Development Facility"

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, Paul [State University of New York Research Foundation, Albany, NY (United States)

    2014-06-27

    The project goal to create a first-of-a-kind crystalline Silicon (c-Si) photovoltaic (PV) Manufacturing & Technology Development Facility (MDF) that will support the growth and maturation of a strong domestic PV manufacturing industry, based on innovative and differentiated technology, by ensuring industry participants can, in a timely and cost-effective manner, access cutting-edge manufacturing equipment and production expertise needed to accelerate the transition of innovative technologies from R&D into manufacturing.

  16. Development of novel IVD assays: a manufacturer's perspective.

    Science.gov (United States)

    Metcalfe, Thomas A

    2010-01-01

    IVD manufacturers are heavily reliant on novel IVD assays to fuel their growth and drive innovation within the industry. They represent a key part of the IVD industry's value proposition to customers and the healthcare industry in general, driving product differentiation, helping to create demand for new systems and generating incremental revenue. However, the discovery of novel biomarkers and their qualification for a specific clinical purpose is a high risk undertaking and the large, risky investments associated with doing this on a large scale are incompatible with IVD manufacturer's business models. This article describes the sources of novel IVD assays, the processes for discovering and qualifying novel assays and the reliance of IVD manufacturers on collaborations and in-licensing to source new IVD assays for their platforms.

  17. Coordinating knowledge transfer within manufacturing networks

    DEFF Research Database (Denmark)

    Yang, Cheng; Johansen, John; Boer, Harry

    2008-01-01

    Along with increasing globalization, the management of international manufacturing networks is becoming increasingly important for industrial companies. This paper mainly focuses on the coordination of knowledge transfer within manufacturing networks. In this context, we propose the time......-place matrix as a tool for mapping the distribution of knowledge within manufacturing networks. Using this tool, four important questions about the coordination of knowledge transfer within a manufacturing network are identified: know-where, know-what, know-when, know-how to transfer. The relationships among...

  18. Construction of corporate social performance indicators for Czech manufacturing industry

    Directory of Open Access Journals (Sweden)

    Marie Dočekalová

    2013-01-01

    Full Text Available This article aims to map out the level of social performance measurement of Czech companies, i.e. what social performance indicators companies monitor and what information they provide to their stakeholders and to construct alternative corporate social performance indicators. Based on an analysis of 24 corporate voluntary reports and results of an empirical research performed among 79 large companies operating in the manufacturing industry, it was found that companies partially monitor their social performance, but from the perspective of international standards (e.g. Global Reporting Initiative, International Federation of Accountants it is still insufficient. Czech companies usually provide only absolute numbers which disguise real trends and do not allow year on year comparison or comparison with other companies. Czech companies should provide a comprehensive picture of their overall performance, they should not focus only on financial indicators based on accounting data, since it is known that the performance measurement based only on financial and economic performance does not lead to long-term success and sustainability of organizations. Companies should monitor more their impact on society within which they operate. Proposed corporate social performance indicators in a measurable and thus manageable way express social issues.

  19. Routing Protocols for Underwater Wireless Sensor Networks: Taxonomy, Research Challenges, Routing Strategies and Future Directions.

    Science.gov (United States)

    Khan, Anwar; Ali, Ihsan; Ghani, Abdullah; Khan, Nawsher; Alsaqer, Mohammed; Rahman, Atiq Ur; Mahmood, Hasan

    2018-05-18

    Recent research in underwater wireless sensor networks (UWSNs) has gained the attention of researchers in academia and industry for a number of applications. They include disaster and earthquake prediction, water quality and environment monitoring, leakage and mine detection, military surveillance and underwater navigation. However, the aquatic medium is associated with a number of limitations and challenges: long multipath delay, high interference and noise, harsh environment, low bandwidth and limited battery life of the sensor nodes. These challenges demand research techniques and strategies to be overcome in an efficient and effective fashion. The design of routing protocols for UWSNs is one of the promising solutions to cope with these challenges. This paper presents a survey of the routing protocols for UWSNs. For the ease of description, the addressed routing protocols are classified into two groups: localization-based and localization-free protocols. These groups are further subdivided according to the problems they address or the major parameters they consider during routing. Unlike the existing surveys, this survey considers only the latest and state-of-the-art routing protocols. In addition, every protocol is described in terms of its routing strategy and the problem it addresses and solves. The merit(s) of each protocol is (are) highlighted along with the cost. A description of the protocols in this fashion has a number of advantages for researchers, as compared to the existing surveys. Firstly, the description of the routing strategy of each protocol makes its routing operation easily understandable. Secondly, the demerit(s) of a protocol provides (provide) insight into overcoming its flaw(s) in future investigation. This, in turn, leads to the foundation of new protocols that are more intelligent, robust and efficient with respect to the desired parameters. Thirdly, a protocol can be selected for the appropriate application based on its described

  20. Evaluation of exposure to the airborne asbestos in an asbestos cement sheet manufacturing industry in Iran.

    Science.gov (United States)

    Panahi, Davood; Kakooei, Hossein; Marioryad, Hossein; Mehrdad, Ramin; Golhosseini, Mohammad

    2011-07-01

    Iran imports nearly 55,000 tons of Chrysotile asbestos per year and asbestos cement (AC) plants contribute nearly 94% of the total national usage. In the present study, airborne asbestos concentrations during AC sheet manufacturing were measured. The fiber type and its chemical composition were also evaluated by scanning electron microscopy (SEM), with energy-dispersive X-ray analysis. Airborne total fiber concentrations of 45 personal samples were analyzed by phase contrast microscopy. The results have highlighted that 15.5% of samples exceed the threshold limit value (TLV) established the American Conference of Governmental Industrial Hygienists, which is 0.1 fiber per milliliter (f/ml). Personal monitoring of asbestos fiber levels indicated a ranged from 0.02 ± 0.01 to 0.16 ± 0.03 f/ml. The geometrical mean was 0.05 ± 1.36 f/ml, which is considerably lower than the TLV. SEM data demonstrate that the fibrous particles consisted, approximately, of Chrysotile (55.89%) and amphiboles (44.11%). We conclude that the industrial consumption of imported Chrysotile asbestos is responsible for the high airborne amphibole asbestos levels in the AC sheet industry. More research is needed to improve characterization of occupational exposures by fiber size and concentration in a variety of industries.

  1. Advances in High Temperature Materials for Additive Manufacturing

    Science.gov (United States)

    Nordin, Nurul Amira Binti; Johar, Muhammad Akmal Bin; Ibrahim, Mohd Halim Irwan Bin; Marwah, Omar Mohd Faizan bin

    2017-08-01

    In today’s technology, additive manufacturing has evolved over the year that commonly known as 3D printing. Currently, additive manufacturing have been applied for many industries such as for automotive, aerospace, medical and other commercial product. The technologies are supported by materials for the manufacturing process to produce high quality product. Plus, additive manufacturing technologies has been growth from the lowest to moderate and high technology to fulfil manufacturing industries obligation. Initially from simple 3D printing such as fused deposition modelling (FDM), poly-jet, inkjet printing, to selective laser sintering (SLS), and electron beam melting (EBM). However, the high technology of additive manufacturing nowadays really needs high investment to carry out the process for fine products. There are three foremost type of material which is polymer, metal and ceramic used for additive manufacturing application, and mostly they were in the form of wire feedstock or powder. In circumstance, it is crucial to recognize the characteristics of each type of materials used in order to understand the behaviours of the materials on high temperature application via additive manufacturing. Therefore, this review aims to provide excessive inquiry and gather the necessary information for further research on additive material materials for high temperature application. This paper also proposed a new material based on powder glass, which comes from recycled tempered glass from automotive industry, having a huge potential to be applied for high temperature application. The technique proposed for additive manufacturing will minimize some cost of modelling with same quality of products compare to the others advanced technology used for high temperature application.

  2. Environmental analysis of the life cycle emissions of 2-methyl tetrahydrofuran solvent manufactured from renewable resources.

    Science.gov (United States)

    Slater, C Stewart; Savelski, Mariano J; Hitchcock, David; Cavanagh, Eduardo J

    2016-01-01

    An environmental analysis has been conducted to determine the cradle to gate life cycle emissions to manufacture the green solvent, 2-methyl tetrahydrofuran. The solvent is considered a greener chemical since it can be manufactured from renewable resources with a lower life cycle footprint. Analyses have been performed using different methods to show greenness in both its production and industrial use. This solvent can potentially be substituted for other ether and chlorinated solvents commonly used in organometallic and biphasic reactions steps in pharmaceutical and fine chemical syntheses. The 2-methyl tetrahydrofuran made from renewable agricultural by-products is marketed by Penn A Kem under the name ecoMeTHF™. The starting material, 2-furfuraldehyde (furfural), is produced from corn cob waste by converting the available pentosans by acid hydrolysis. An evaluation of each step in the process was necessary to determine the overall life cycle and specific CO2 emissions for each raw material/intermediate produced. Allocation of credits for CO2 from the incineration of solvents made from renewable feedstocks significantly reduced the overall carbon footprint. Using this approach, the overall life cycle emissions for production of 1 kg of ecoMeTHF™ were determined to be 0.191 kg, including 0.150 kg of CO2. Life cycle emissions generated from raw material manufacture represents the majority of the overall environmental impact. Our evaluation shows that using 2-methyl tetrahydrofuran in an industrial scenario results in a 97% reduction in emissions, when compared to typically used solvents such as tetrahydrofuran, made through a conventional chemical route.

  3. Quality assurance in tube manufacture

    International Nuclear Information System (INIS)

    Depken, H.

    1976-01-01

    Reliability in service essential for many high-technology products fabricated today. This is particularly the case within the nuclear industry. Here defective materials or components may have diastrous consequences to the safety of human beings and the environment. A new concept - Quality Assurance - originates from this industry. The concept implies that all contractors, fabricators and material manufactures involved must prove that the quality control system used, fulfits particular requirements at all manufacturing, inspection and testing stages. These requirement are laid down in two standards issued by the U.S. Atomic Energy Commission and the American Society of Mechanical Engineers. These standards are discussed in the paper. As a manufacturer of steel products for nuclear applications Sandvik has been forced to establish a quality assurance system according to these principles. The Sandvik approach is briefly described with regard to organisation and other major quality assurance activities. Further the education and training of operators and technicians is touched upon. Finally some viewpoints regarding audits performed by customers of steel manufacturers are expressed. (author)

  4. Challenges in Teaching Modern Manufacturing Technologies

    Science.gov (United States)

    Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

    2015-01-01

    Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in…

  5. 75 FR 54969 - National Emission Standards for Hazardous Air Pollutants From the Portland Cement Manufacturing...

    Science.gov (United States)

    2010-09-09

    ... Hazardous Air Pollutants From the Portland Cement Manufacturing Industry and Standards of Performance for... Standards for Hazardous Air Pollutants From the Portland Cement Manufacturing Industry and Standards of... (NESHAP) from the Portland Cement Manufacturing Industry and to the New Source Performance Standards (NSPS...

  6. 76 FR 2860 - National Emission Standards for Hazardous Air Pollutants From the Portland Cement Manufacturing...

    Science.gov (United States)

    2011-01-18

    ... Cement Manufacturing Industry and Standards of Performance for Portland Cement Plants AGENCY... Portland Cement Manufacturing Industry Docket, Docket ID No. EPA-HQ-OAR-2002-0051, 1200 Pennsylvania Ave... Portland Cement Manufacturing Industry Docket, EPA West, Room 3334, 1301 Constitution Ave., NW., Washington...

  7. Josiah Wedgwood, Manufacturing and Craft

    DEFF Research Database (Denmark)

    Holt, Robin; Popp, Andrew

    2016-01-01

    Craft and industrial manufacture are often seen as dichotomous, with craft being marginalized during the process of industrialization. We want to look beyond this position, searching for craft in places where it has gone unnoticed and where it might have bloomed anew in the interstices created...

  8. NEDO Forum 2001. Session on industrial technology development (Future of thing making and manufacturing/processing technologies); NEDO Forum 2001. Sangyo gijutsu kaihatsu session (monozukuri seisan kako gijutsu no mirai)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-20

    The presentations made at the above-named session of the NEDO (New Energy and Industrial Technology Development Organization) forum held in Tokyo on September 20, 2001, are collected in this report. In a lecture entitled 'History of thing making,' the roles played by the now-defunct National Testing Laboratory and Industrial Test and Research Center were described and strategy for future development was predicted. In a lecture entitled 'Thing making and international apprentices competition,' apprenticeship training in practice at Denso Systems Corporation was presented. In a lecture entitled 'Key technology in thing making: outlook of metal mold industry,' shift in Japanese manufacturers' paradigm and change in metal mold marketing were explained, and the importance of reaching for the first position in the world in some specific fields or of expanding the scope of work in the entire value chain was stressed. In a lecture entitled 'Digital meister project: Aiming at amalgamation of IT (information technology) and MT (manufacturing technology),' database construction in the manufacture of metal molds, introduction of knowledge management systems, and development of CAD/CAM/CAE (computer-aided design/computer-aided manufacturing/computer-aided engineering) were discussed. (NEDO)

  9. Greenhouse gas emissions from production chain of a cigarette manufacturing industry in Pakistan.

    Science.gov (United States)

    Hussain, Majid; Zaidi, Syed Mujtaba Hasnian; Malik, Riffat Naseem; Sharma, Benktesh Dash

    2014-10-01

    This study quantified greenhouse gas (GHG) emissions from the Pakistan Tobacco Company (PTC) production using a life cycle approach. The PTC production chain comprises of two phases: agricultural activities (Phase I) and industrial activities (Phase II). Data related to agricultural and industrial activities of PTC production chain were collected through questionnaire survey from tobacco growers and records from PTC manufacturing units. The results showed that total GHG emissions from PTC production chain were 44,965, 42,875, and 43,839 tCO2e respectively in 2009, 2010, and 2011. Among the agricultural activities, firewood burning for tobacco curing accounted for about 3117, 3565, and 3264 tCO2e, fertilizer application accounted for 754, 3251, and 4761 tCO2e in 2009, 2010, and 2011, respectively. Among the industrial activities, fossil fuels consumption in stationary sources accounted for 15,582, 12,733, and 13,203 tCO2e, fossil fuels used in mobile sources contributed to 2693, 3038, and 3260 tCO2e, and purchased electricity consumed resulted in 15,177, 13,556, and 11,380 tCO2e in 2009, 2010, and 2011, respectively. The GHG emissions related to the transportation of raw materials and processed tobacco amounted to 6800, 6301, and 7317 respectively in 2009, 2010, and 2011. GHG emissions from energy use in the industrial activities constituted the largest emissions (i.e., over 80%) of GHG emissions as PTC relies on fossil fuels and fossil fuel based electrical power in industrial processes. The total emissions of carbon footprint (CFP) from PTC production were 0.647 tCO2e per million cigarettes produced in 2009, 0.675 tCO2e per million cigarettes in 2010 and 0.59 tCO2e per million cigarettes in 2011. Potential strategies for GHG emissions reductions for PTC production chain include energy efficiency, reducing reliance on fossil fuels in non-mobile sources, adoption of renewable fuels including solar energy, energy from crop residues, and promotion of organic

  10. Green Manufacturing Fundamentals and Applications

    CERN Document Server

    2013-01-01

    Green Manufacturing: Fundamentals and Applications introduces the basic definitions and issues surrounding green manufacturing at the process, machine and system (including supply chain) levels. It also shows, by way of several examples from different industry sectors, the potential for substantial improvement and the paths to achieve the improvement. Additionally, this book discusses regulatory and government motivations for green manufacturing and outlines the path for making manufacturing more green as well as making production more sustainable. This book also: • Discusses new engineering approaches for manufacturing and provides a path from traditional manufacturing to green manufacturing • Addresses regulatory and economic issues surrounding green manufacturing • Details new supply chains that need to be in place before going green • Includes state-of-the-art case studies in the areas of automotive, semiconductor and medical areas as well as in the supply chain and packaging areas Green Manufactu...

  11. The Clean Energy Manufacturing Analysis Center (CEMAC): Providing Analysis and Insights on Clean Technology Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Nicholi S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-28

    The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

  12. Determinants of Industrial Production in Turkey

    Directory of Open Access Journals (Sweden)

    MUSTAFA OZTURK

    2017-12-01

    Full Text Available The necessity of emphasizing the importance of industrial production for the sustainable growth and development of Turkey has been a topic of discussion in political and academia circles. The growth in industrial production (output depends on the investment in manufacturing sectors and the demand for the products. Along with internal demand, Turkey tries to support its manufacturing base with export (incentives. Manufacturing items occupy the greatest share of products in export sales. The development of manufacturing capabilities of the country is clearly based on the demand from inside and out. The effect of Turkey’s export on its industrial production throughout 2000’s has been analyzed. For this purpose we developed a VAR model where industrial production index was the dependent variable and export, investment, and interest rate were independent variables. All independent variables were found to be significantly explaining industrial production.

  13. PENERAPAN LEAN MANUFACTURING UNTUK MEREDUKSI WASTE DI INDUSTRI SKALA UKM

    Directory of Open Access Journals (Sweden)

    Darminto Pujotomo

    2012-08-01

    Full Text Available Lean Manufacturing merupakan konsep manufaktur untuk menghasilkan produk yang efisien dengan mengurangi biaya produksi melalui efisiensi. Dalam konsep Lean, dikenal 7 macam pemborosan yang meliputi produksi berlebih, transportasi material yang berlebihan, menunggu, proses yang tidak perlu, persediaan, pergerakan dan cacat produk. Penelitian ini menggunakan value stream mapping dalam mengidentifikasi pemborosan dan menelusuri potensi terjadinya pemborosan. Potensi pemborosan yang terjadi akan direduksi dengan menggunakan instrumen yang sesuai berdasarkan indikator terpilih. Penelitian diharapkan dapat menghasilkan proses produksi yang lebih efisiensi sehingga mampu mereduksi biaya produksi. Pada akhirnya akan menghasilkan profit yang lebih besar. Kata kunci : lean manufacturing, value stream mapping, waste   Lean Manufacturing is a manufacturing concepts to produce products that are efficient by reducing production costs through efficiencies. In the Lean concept, known seven kinds of waste, including overproduction, excessive material transportation, waiting, unnecessary processes, inventory, motion and product defects. This study uses value stream mapping to identify waste and exploring the potential for waste. Potential waste that occurs will be reduced by using appropriate instruments based on selected indicators. The study is expected to produce a more efficient production processes so as to reduce production costs.Will ultimately result in greater profits. Keywords: lean manufacturing, value stream mapping, waste

  14. Promotion of an indigenous manufacturing industry in the UK

    International Nuclear Information System (INIS)

    Anderson, C.

    1998-01-01

    Of the large European wind energy markets, that of the UK is uniquely dominated by imported technology. An indigenous manufacturing base is desirable for strategic reasons, and to create employment and export opportunities. Analysis of the wind energy policies of other countries indicates the factors required to stimulate local manufacture. This paper examines how UK wind energy policy may be shaped for this purpose, taking account of the lessons learned under NFFO/SRO, and elsewhere in Europe. (Author)

  15. Perceived social support in the personnel of a manufacturing industry in Urmia in 2014-15

    Directory of Open Access Journals (Sweden)

    Mohhammad Hajagazadeh

    2015-09-01

    Full Text Available Background & objective: Perceived social support in the personnel of any organization is an important psychological factor that affects the efficiency of the workforce and exerts direct and positive effects on the their quality of life. The present study was conducted to investgiate the level of perceived social support in the personnel of a manufacturing industry in Urmia and to determine its relationship with certain demographic variables. Methods: The present descriptive study was conducted on 156 personnel of a manufacturing industry in Urmia. Data collection was conducted using the Perceived Social Support Questionnaire. The results obtained were then analyzed using descriptive and analytical statistics, including the chi-squared test and the one-way analysis of variance. Results: The mean value of perceived social support from coworkers (3.36±0.72 was higher than the mean value of perceived social support from managers (2.99±0.65. Perceived social support from coworkers and managers was found to have a statistically significant relashionship with age, work experience and type of employment contract (P-value<0.05. Conclusion: Given that perceived social support from coworkers and managers fell in the medium range in the present study, managers should make efforts to foster a greater social support in the workplace for their personnel and to create better relationships with them in the attempt to improve their performance in different domains. Due to the greater need of the less-experienced personnel for social support, managers are recommended to show their support through devising bonus schemes, providing emotional support and establishing a better relationship with their personnel.

  16. ECommerce Strategy for Footwear Manufacturing Start-up

    OpenAIRE

    Kuzmanovic, Slobodan

    2010-01-01

    This paper defines and analyzes an eCommerce strategy for a footwear manufacturing start-up firm and assesses the financial impact this eCommerce strategy has in supporting the firm’s business model. The market analysis of the importance of eCommerce determined the online channel’s market share and influence on consumer purchasing decisions, while the industry analysis examined the competitive landscape and industry forces as drivers of forward integration from manufacturing to wholesale and ...

  17. National Manufacturing Strategy: Is a National Manufacturing Strategy Essential to National Security?

    Science.gov (United States)

    2011-05-01

    cycle found nearly a quarter of all homeowners owning more than their home was worth. 11 Both Paul Volcker and Warren Buffet arrived at similar...November 15, 2010; Warren Buffet , Testimony, Financial Crisis Inquiry Commission, June 2, 2010; “Subprime Mortgage Crisis,” http://en.wikipedia.org...overseas manufacturing. Case Study: Semiconductor Wafer Industry. The history of the semiconductor industry is an instructive account . It begins with

  18. The Industrial Internet of Things

    OpenAIRE

    Albano, Michele; Silva, José Bruno; Lino Ferreira, Luis

    2017-01-01

    Demo in 22º Seminário da Rede Temática de Comunicações Móveis (RTCM 2017). 18, Jan, 2017, Session III. Lisboa. The application of the Internet of Things to manufacturing is the driving force of the new industrial revolution (Industrie 4.0). In fact, most activities in the manufacturing industry can benefit from the data collected in the context of the industrial process. The Industrial Internet of Things (IIoT), whose pillars are the usage of IP communication between the devices and making...

  19. TECHNOLOGICAL CHANGES IN THE CEMENT MANUFACTURING INDUSTRY.

    Science.gov (United States)

    WESSON, CARL E.

    THE PURPOSE OF THIS STUDY IS TO PRESENT A PRELIMINARY PICTURE OF OCCUPATIONAL CHANGES BROUGHT ABOUT IN THE MANUFACTURE OF CEMENT AS A RESULT OF INTRODUCING AUTOMATED EQUIPMENT. ONE AUTOMATED AND SEVERAL CONVENTIONAL TYPE CEMENT PLANTS WERE STUDIED. ANALYSIS OF DATA OBTAINED THROUGH RESEARCH AND DATA COLLECTED DURING THE STUDY REVEALED THAT…

  20. Process for the manufacture of a filter material for cleaning industrial or internal combustion engine exhaust gases and filter material manufactured according to the process. Verfahren zur Herstellung eines Filterstoffes zur Reinigung von industriellen oder Brennkraftmaschinen-Abgasen und ein hiernach hergestellter Filterstoff

    Energy Technology Data Exchange (ETDEWEB)

    Bumbalek, A.

    1986-01-02

    This is a process for the manufacture of a filter material for cleaning industrial or internal combustion engine exhaust gases and filter material manufactured according to the process. The filter material is manufactured from the mineralized combustion product of peel of tropical fruits burnt at a temperature of 820/sup 0/C to 840/sup 0/C in an oxidising atmosphere excluding the production of carbon, particularly using banana skins and orange peels, which product is granulated with carrier materials or compressed.

  1. Application of industrial CT in reverse engineering technology

    International Nuclear Information System (INIS)

    Fang Liyong; Li Hui; Bai Jinping; Li Bailin

    2013-01-01

    The basic principle and basic steps of reverse engineering technology based on industrial CT are described. The recent research progresses and situation at home and abroad of reverse engineering technology based on industrial CT image are respectively described, analyzed and summarized from two routes which are surface segmentation and volume segmentation. An example of conch is used to exhibit the results from the two routes in reverse engineering technology based on industrial CT image. Finally, some difficulties in application and the future developments of reverse engineering technology based on industrial CT are prospected. (authors)

  2. The future of the chemical industries

    International Nuclear Information System (INIS)

    Shinnar, R.

    1991-01-01

    As Lincoln, we first must ask where we are before we ask whither. I'd therefore like to define where our industry is and how it got there before we look at the challenges facing us. If we view the chemical and petroleum industries through the glass of macroeconomics, they look very healthy. Let's start with size. Table 1 shows that these two industries each provide about 10% of the total U.S. manufacturing output. This paper shows the fraction of the total GNP contributed by the chemical industry and by the petroleum industry and compares them with total manufacturing. The authors note that total manufacturing grew more slowly than the total GNP, whereas over the last 40 years, the chemical industry grew close to the rate of the GNP. For a large industry, this is the best we can hope for. The chemical industry is one of the very few major industries that has consistently maintained a positive trade balance

  3. Ethical, environmental and social issues for machine vision in manufacturing industry

    Science.gov (United States)

    Batchelor, Bruce G.; Whelan, Paul F.

    1995-10-01

    Some of the ethical, environmental and social issues relating to the design and use of machine vision systems in manufacturing industry are highlighted. The authors' aim is to emphasize some of the more important issues, and raise general awareness of the need to consider the potential advantages and hazards of machine vision technology. However, in a short article like this, it is impossible to cover the subject comprehensively. This paper should therefore be seen as a discussion document, which it is hoped will provoke more detailed consideration of these very important issues. It follows from an article presented at last year's workshop. Five major topics are discussed: (1) The impact of machine vision systems on the environment; (2) The implications of machine vision for product and factory safety, the health and well-being of employees; (3) The importance of intellectual integrity in a field requiring a careful balance of advanced ideas and technologies; (4) Commercial and managerial integrity; and (5) The impact of machine visions technology on employment prospects, particularly for people with low skill levels.

  4. Chemical Manufacturing and Refining Industry Legitimacy: Reflective Management, Trust, Precrisis Communication to Achieve Community Efficacy.

    Science.gov (United States)

    Heath, Robert L; Lee, Jaesub

    2016-06-01

    Calls for emergency right-to-know in the 1980s, and, in the 1990s, risk management planning, motivated U.S. chemical manufacturing and refining industries to operationalize a three-pronged approach to risk minimization and communication: reflective management to increase legitimacy, operational safety programs to raise trust, and community engagement designed to facilitate citizens' emergency response efficacy. To assess these management, operational, and communication initiatives, communities (often through Local Emergency Planning Committees) monitored the impact of such programs. In 2012, the fourth phase of a quasi-longitudinal study was conducted to assess the effectiveness of operational change and community outreach in one bellwether community. This study focuses on legitimacy, trust, and response efficacy to suggest that an industry can earn legitimacy credits by raising its safety and environmental impact standards, by building trust via that change, and by communicating emergency response messages to near residents to raise their response efficacy. As part of its campaign to demonstrate its concern for community safety through research, planning, and implementation of safe operations and viable emergency response systems, this industry uses a simple narrative of risk/emergency response-shelter-in-place-communicated by a spokes-character: Wally Wise Guy. © 2015 Society for Risk Analysis.

  5. Case Study on Lean Manufacturing System Implementation in Batch Printing Industry Malaysia

    Directory of Open Access Journals (Sweden)

    Tang Saihong

    2016-01-01

    Full Text Available Lean Manufacturing is a popular tool to be implemented in printing industry fields for the purpose of achieving the successful production goals and it is a well-organized method used to eliminate the waste or non-value added activities. Lean Manufacturing consists of several tools like 5S, TPM, Kanban, Kaizen and others. In this paper, the researcher is focus on TPM (Total Productive Maintenance. TPM is a concept used for maintaining plants and equipment with the involvement of all employees in the company in order to increase the overall equipment effectiveness (OEE. In this paper, the researcher will identify the problem faced in company’s production line and then implement lean tools in order to improve the productivity. Afterward, the researcher will carry out time study on company’s production line. The purpose of time study is to getting the result for OEE and the time taken for producing one piece of product. The researcher is then designed and suggested one-piece flow system to the management with showing the result on simulation that getting improvement in productivity. The result was simulated by using Flexsim and shows that 7.59 seconds was saved in producing one piece of calendar. At the end, the result shows that OEE increase from 34.3% to 60% and the company total save around 6 hours per month by implement one-piece flow. At last, by verifying the distribution of collected data, the researcher will perform Anderson Darling Normality test to ensure the distribution of data are normal.

  6. China's Industrial Policy in Relation to Electronics Manufacturing

    Institute of Scientific and Technical Information of China (English)

    Zhongxiu Zhao; Xiaoling Huang; Dongya Ye; Paul Gentle

    2007-01-01

    China has become the biggest exporter of electronic products in the world. Government policy intervention has contributed significantly to the rapid expansion of the electronics industry. The present paper examines the evolutionary development of industrial policies related to the electronics industry in China and the impacts of such policies on the shaping of the industry. In particular, the relationship between foreign funded enterprises and domestic firms are examined in detail. The future trend of the industry is also discussed in the paper, and the policy focus of the Chinese Government is predicted.

  7. Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing

    Directory of Open Access Journals (Sweden)

    Yan-Yan Wang

    2011-09-01

    Full Text Available How to design a production process with low carbon emissions and low environmental impact as well as high manufacturing performance is a key factor in the success of low-carbon production. It is important to address concerns about climate change for the large carbon emission source manufacturing industries because of their high energy consumption and environmental impact during the manufacturing stage of the production life cycle. In this paper, methodology for determining a production process is developed. This methodology integrates process determination from three different levels: new production processing, selected production processing and batch production processing. This approach is taken within a manufacturing enterprise based on prior research. The methodology is aimed at providing decision support for implementing Environmentally Benign Manufacturing (EBM and low-carbon production to improve the environmental performance of the manufacturing industry. At the first level, a decision-making model for new production processes based on the Genetic Simulated Annealing Algorithm (GSAA is presented. The decision-making model considers not only the traditional factors, such as time, quality and cost, but also energy and resource consumption and environmental impact, which are different from the traditional methods. At the second level, a methodology is developed based on an IPO (Input-Process-Output model that integrates assessments of resource consumption and environmental impact in terms of a materials balance principle for batch production processes. At the third level, based on the above two levels, a method for determining production processes that focus on low-carbon production is developed based on case-based reasoning, expert systems and feature technology for designing the process flow of a new component. Through the above three levels, a method for determining the production process to identify, quantify, assess, and optimize the

  8. Assessment of good manufacturing practice for small scale food industry in Malang region, East Java, Indonesia

    Science.gov (United States)

    Purwantiningrum, I.; Widyhastuty, W.; Christian, J.; Sari, N.

    2018-03-01

    Enhancing food safety in developing countries, such as Indonesia, poses more challenges, especially those of the small- and medium-scale. Various food safety systems are available and readily implemented in the food industry. However, to ensure the effectiveness of such systems, pre-requisite programs should be applied prior to the implementation of food safety system. One of the most acknowledged pre-requisite program is Good Manufacturing Practices (GMP). The aim of this study is to assess the GMP compliance of some small-scale food companies in East Java. Three types of traditional food product were selected, include tempe chips, palm sugar, and instant herbal drink. A survey involving three companies for each type of traditional food was conducted. Data was obtained through observation and assessment based on tabulated criteria in GMP criteria. In essential, the result revealed the compliment level of the food companies being surveyed. There was different level of compliment between each type of the food industry, where the palm sugar industry had the lowest level of compliment compared to the other two. This difference is due to the food safety awareness, social and cultural influences, and also knowledge on food safety and hygiene practice.

  9. Manufacturing in Denmark

    DEFF Research Database (Denmark)

    Hansen, Johannes; Boer, Henrike Engele Elisabeth; Boer, Harry

    This report compares the manufacturing strategies, practices, performances and improvement activities of 39 companies that are representative for the Danish assembly industry with those of 804 companies from 19 other countries. The data supporting this report were collected in 2013 and concern...

  10. AN ANALYSIS OF MANUFACTURING MARKET STRUCTURE IN NORTH SUMATRA PROVINCE

    Directory of Open Access Journals (Sweden)

    Muhammad Asaad

    2013-04-01

    Full Text Available This study aims to analyze market structure and manufacturing industry performance on the economy of North Sumatra. The analysis uses two approaches, namely SCP analysis and econometric model. The data used is the Survey of Large Medium 2005-2009. The result shows that the structure of the industry is more dominant, including tight oligopoly, only small parts which belong to loose oligopoly and oligopoly markets. Some industries which have important roles for the economy are the palm oil industry, food and beverage industry, rubber industry and rubber products, and iron and steel basic industries, and basic non-ferrous metals.Keywords: market structure, industry performance, manufacturing industry, local economyJEL classification numbers: L10, L20, L60

  11. Health hazards of child labor in the leather products and surgical instrument manufacturing industries of Sialkot, Pakistan

    International Nuclear Information System (INIS)

    Junaid, Muhammad; Malik, Riffat Naseem; Pei, De-Sheng

    2017-01-01

    Child labor is a major challenge in the developing countries and comprehensive health hazard identification studies on this issue are still lacking. Therefore, the current study is an effort to highlight the health concerns of child labor exposed in the key small scale industries of Sialkot, Pakistan. Our findings revealed jolting levels of heavy metals in the urine, blood, serum, saliva, and hair samples collected from the exposed children. For example, in the urine samples, Cd, Cr, Ni, and Pb were measured at the respective concentrations of 39.17, 62.02, 11.94 and 10.53 μg/L in the surgical industries, and 2.10, 4.41, 1.04 and 5.35 μg/L in the leather industries. In addition, source apportionment revealed polishing, cutting, and welding sections in the surgical industries and surface coating, crusting, and stitching sections in the leather industries were the highest contributors of heavy metals in the bio-matrices of the exposed children, implying the dusty, unhygienic, and unhealthy indoor working conditions. Further, among all the bio-matrices, the hair samples expressed the highest bioaccumulation factor for heavy metals. In accordance with the heavy metal levels reported in the exposed children, higher oxidative stress was found in the children working in the surgical industries than those from the leather industries. Moreover, among heavy metals’ exposure pathways, inhalation of industrial dust was identified as the primary route of exposure followed by the ingestion and dermal contact. Consequently, chemical daily intake (CDI), carcinogenic and non-carcinogenic hazard quotients (HQs) of heavy metals were also reported higher in the exposed children and were also alarmingly higher than the corresponding US EPA threshold limits. Taken all together, children were facing serious health implications in these industries and need immediate protective measures to remediate the current situation. - Highlights: • Children occupational exposure assessment

  12. Low Cost Lithography Tool for High Brightness LED Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Andrew Hawryluk; Emily True

    2012-06-30

    The objective of this activity was to address the need for improved manufacturing tools for LEDs. Improvements include lower cost (both capital equipment cost reductions and cost-ofownership reductions), better automation and better yields. To meet the DOE objective of $1- 2/kilolumen, it will be necessary to develop these highly automated manufacturing tools. Lithography is used extensively in the fabrication of high-brightness LEDs, but the tools used to date are not scalable to high-volume manufacturing. This activity addressed the LED lithography process. During R&D and low volume manufacturing, most LED companies use contact-printers. However, several industries have shown that these printers are incompatible with high volume manufacturing and the LED industry needs to evolve to projection steppers. The need for projection lithography tools for LED manufacturing is identified in the Solid State Lighting Manufacturing Roadmap Draft, June 2009. The Roadmap states that Projection tools are needed by 2011. This work will modify a stepper, originally designed for semiconductor manufacturing, for use in LED manufacturing. This work addresses improvements to yield, material handling, automation and throughput for LED manufacturing while reducing the capital equipment cost.

  13. Study on the Reasons and Countermeasures for Loss of Listed Companies in Manufacturing Industry

    Institute of Scientific and Technical Information of China (English)

    Yong; DU; Jun; DU; Bo; YAN

    2013-01-01

    In combination with the data of loss-making listed companies in manufacturing industry at capital market in 2008-2010,this paper analyzed the characteristics of loss of listed companies.Major reasons include the blind investment of management personnel,low operation and management level,blind pursuit of diversified operation,improper stock right structure,weak supervision of government,and imperfect delisting system.Finally,it came up with some countermeasures,including improving quality of management personnel,management personnel selecting proper investment projects,strengthening internal management of enterprise,implementing effective asset rearrangement,setting up effective incentive and restrictive mechanism,bringing into play regulation function of banks,improving delisting mechanism,reducing centralization of state owned stock right,and establishing and improving market information disclosure system.

  14. Evaluation of potential hazards presented by the nearby industrial environment and transportation routes

    International Nuclear Information System (INIS)

    1982-05-01

    RFS or Regles Fondamentales de Surete (Basic Safety Rules) applicable to certain types of nuclear facilities lay down requirements with which compliance, for the type of facilities and within the scope of application covered by the RFS, is considered to be equivalent to compliance with technical French regulatory practice. The object of the RFS is to take advantage of standardization in the field of safety, while allowing for technical progress in that field. They are designed to enable the operating utility and contractors to know the rules pertaining to various subjects which are considered to be acceptable by the Service Central de Surete des Installations Nucleaires, or the SCSIN (Central Department for the Safety of Nuclear Facilities). These RFS should make safety analysis easier and lead to better understanding between experts and individuals concerned with the problems of nuclear safety. The SCSIN reserves the right to modify, when considered necessary, any RFS and specify, if need be, the terms under which a modification is deemed retroactive. The purpose of this RFS is to define methods for determining risks created by potential hazards represented by the industrial environment and transportation routes in the vicinity of a PWR, in order to verify design criteria acceptability with regard to such hazards

  15. Design for Manufacturing – One-Piece, Fibre-Placed Composite Helicopter Tailboom

    International Nuclear Information System (INIS)

    Marsden, Catharine; Fews, Robert; Oldroyd, Paul; Yousefpour, AH

    2011-01-01

    Recurring cost has become a critical driver in the design of helicopter airframes, and although composite materials have become widely used in aircraft structures, the hand lay-up manufacturing process in many cases prevents these applications from being cost-effective. Automated manufacturing technologies promise not only reduced production costs but also higher quality, repeatable parts. The introduction of existing automated manufacturing techniques and technologies from industries such as the automotive sector into aerospace can be challenging due to the unique product characteristics as well as the stringent certification and quality control requirements of the industry. The aerospace industry is a low-volume, high value production environment where 'hand-made' products are produced by highly experienced and qualified trades-people. Both metallic and composite components are subjected to precise manufacturing control and documentation requirements. The introduction of automated manufacturing technologies must be done in such a way as to respect these often demanding constraints. The introduction of automation to industrialized processes impacts not only the way parts are produced, but also the way they are designed. Successful composite design and manufacturing automation in the aerospace industry requires the engineering designer and analyst to become increasingly involved in the manufacturing of the product, as machine limitations and producibility become increasingly important drivers for design. This paper presents an overview of a development project intended to evaluate the effectiveness and benefits of the automated fibre placement technology through the design, prototype build and testing of a composite tailboom. The discussion centres on the 'design for manufacturing' concept and provides a perspective on the project objectives, material and process selection and trade-offs, geometric and structural considerations, and component assembly and fastening.

  16. Ergonomic study of biorhythm effect on the 62 occurrence of human errors and accidents in automobile manufacturing industry

    OpenAIRE

    2012-01-01

    Background and Aim: According to the biorhythm theory when the phase shift from positive to negative and vice versa people experience a critical an unstable day that prone them to error and accident. The purpose of this study is to determine this relationship in one of the automobile manufacturing industry. . Materials and Methods: At first 1280 person incident entered the study was reviewed and then the critical days of each biological cycle was determined using the software Easy Biorh...

  17. Root Cause Assessment for a Manufacturing Industry: A Case Study

    Directory of Open Access Journals (Sweden)

    R. Kalantri

    2013-03-01

    Full Text Available Root-cause identification for quality related problems are key issues for manufacturing processes. It has been a very challenging engineering problem particularly in a multistage manufacturing, where maximum number of processes and activities are performed. However, it may also be implemented with ease in each and every individual set up and activities in any manufacturing process. Kaizen is aimed towards reduction in different types of losses i.e. Failure Loss/ Breakdown Loss, Minor stoppage, idling loss, Setup and adjustment loss etc. So as to improve quality and productivity.In this report, root-cause identification methodology has been adopted to eliminate the rejection of product manufactured by the enterprise and improving the life of product. Brainstorming and other Root Cause Assesmenttools have been used to find out the reasons of tube failure and vibration in tubular strander. Solutions of these problems have also given in this report. Kaizen activities have reduced the time consumed in daily activities of cleaning, lubricating, inspection etc. A detailed study has illustrated the effectiveness of the proposed methodology.

  18. Will robots replace us? : an Empirical analysis of the impacts of robotization on employment in the Norwegian manufacturing industry

    OpenAIRE

    Grøndahl, Fredrik; Eriksen, Gina Hegland

    2017-01-01

    Rapid advances in robotics, artificial intelligence, and digital technologies have introduced renewed concern that labor will become redundant. The aim of this thesis is to assess whether there exists a relationship between robotization and employment in the time periods 1996-2005 and 2008-2015 in Norwegian manufacturing industries. We exploit data on operational robots from the International Federation of Robotics and individual level data from the Norwegian Labour Force Surve...

  19. Sensemaking and politics in MNCs: A comparative analysis of vocabularies within the global manufacturing discourse in one industrial sector

    OpenAIRE

    Geppert, M

    2003-01-01

    This article compares sensemaking processes in multinational corporations (MNCs) situated in the same industrial sector. Our comparative analysis of three MNCs and their subsidiaries in Germany and the United Kingdom aims to shed light on the contextual dimension (institutions, culture, and politics) of the sensemaking process. First, I discuss ideologies related to the discourse about global restructuring of manufacturing. Second, I compare similarities and differences in vocabularies of the...

  20. Sustainability Characterization for Additive Manufacturing.

    Science.gov (United States)

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.