WorldWideScience

Sample records for industrial environmental management

  1. Environmental management in nuclear industry

    International Nuclear Information System (INIS)

    Pillai, K.C.; Bhat, I.S.

    1988-01-01

    Safety of the environment is given due attention right at the design state of nuclear energy installations. Besides this engineered safety environmental protection measures are taken on (a) site selection criteria (b) waste management practices (c) prescribing dose limits for the public (d) having intensive environmental surveillance programme and (e) emergency preparedness. The paper enumerates the application of these protection measures in the environmental management to make the nuclear industry as an example to follow in the goal of environmental safety. (author)

  2. Decision Support for Environmental Management of Industrial ...

    Science.gov (United States)

    Non-hazardous solid materials from industrial processes, once regarded as waste and disposed in landfills, offer numerous environmental and economic advantages when put to beneficial uses (BUs). Proper management of these industrial non-hazardous secondary materials (INSM) requires estimates of their probable environmental impacts among disposal as well as BU options. The U.S. Environmental Protection Agency (EPA) has recently approved new analytical methods (EPA Methods 1313–1316) to assess leachability of constituents of potential concern in these materials. These new methods are more realistic for many disposal and BU options than historical methods, such as the toxicity characteristic leaching protocol. Experimental data from these new methods are used to parameterize a chemical fate and transport (F&T) model to simulate long-term environmental releases from flue gas desulfurization gypsum (FGDG) when disposed of in an industrial landfill or beneficially used as an agricultural soil amendment. The F&T model is also coupled with optimization algorithms, the Beneficial Use Decision Support System (BUDSS), under development by EPA to enhance INSM management. The objective of this paper is to demonstrate the methodologies and encourage similar applications to improve environmental management and BUs of INSM through F&T simulation coupled with optimization, using realistic model parameterization.

  3. Environmental management systems: An industry viewpoint

    International Nuclear Information System (INIS)

    Ottenbreit, R.

    1993-01-01

    Imperial Oil is upgrading systems used to ensure protection of health and safety and to facilitate the internalization and integration of environmental considerations into its business. Work in progress related to this upgrading is reported. The upgrading was undertaken partly in response to increased expectations from stakeholders and from the notion that improvement of the environmental, health, and safety (EH ampersand S) aspects of business can have the effect of improving reliability, lowering expenses, and minimizing liabilities. The responsibility for establishing environmental policy and direction as well as the environmental management framework rests with Imperial Oil's management committee and the EH ampersand S committee of the board of directors. Responsibility and accountability for implementation and sustainment of environmental processes and systems resides with line management. One of the management systems, the Operations Integrity Management Framework, is described. Elements of this framework include management leadership, accountability, and commitment; risk assessment and management; management of change; personnel and training; incident investigation and analysis; and facilities design and construction. 2 figs

  4. Integrating energy and environmental management in wood furniture industry.

    Science.gov (United States)

    Gordić, Dušan; Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review.

  5. Integrating Energy and Environmental Management in Wood Furniture Industry

    Science.gov (United States)

    Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review. PMID:24587734

  6. Environmental management in Slovenian industrial enterprises - Empirical study

    Directory of Open Access Journals (Sweden)

    Vesna Čančer

    2002-01-01

    Full Text Available timulated with the firm belief that environmental management helps enterprises to achieve business success, expressed by a majority of managers in the sample enterprises, we present the results of an empirical study in the Slovene processing industry. The purpose of our research work is to identify, analyse and present the importance of the environment in business decision-making, the role of environmental management in strategic decision-making and its distribution across the business functions; environmental performance in business processes; the use of the methods for environmentally oriented business decision-making and the developmental tendencies of environmental management in Slovene enterprises of the processing industry. We define the key drivers of environmental management and their effect on the environmental behaviour of these enterprises. We present and interpret data indicating that environmental management is caused not only by compliance and regulation, but also by competition and enterprises’ own initiative.

  7. INDUSTRIAL WASTE MANAGEMENT TO IMPROVE ENVIRONMENTAL SECURITY

    Directory of Open Access Journals (Sweden)

    V. A. Perfilov

    2016-01-01

    Full Text Available Aim. Disposal of industrial waste to improve the environmental safety by means of recycling and reusing in the manufacture of building materials.Materials and methods. We made a selection of new optimum compositions of fiber-concretes using industrial carbon black from heat generating productions, glass fibers, plasticizers, activated mixing water produced using an ultrasonic unit.Results. New fiber-reinforced concrete compositions were developed using carbon black as an additive. As a result of the processing of the experimental data, it has been revealed that introduction of carbon black as an additive contributed to the increase of the strength characteristics of nearly all fiber-reinforced concrete compositions. It has been found that microparticles of carbon black accumulate the products of hydration of portlandcement-hydrosilicate calcium on the surface and contribute to the formation of a solid microarming concrete structure.Conclusions. The use of industrial carbon black in fibrous concrete mixture using restructured water improves its rheological properties, reduces its segregation and improves the homogeneity of the concrete. Recycling and re-using carbon black in the production of building materials will improve the environmental ecology.

  8. Product waste in the automotive industry : Technology and environmental management

    NARCIS (Netherlands)

    Groenewegen, Peter; Hond, Frank Den

    1993-01-01

    In this article the changes in technology and industry structure forced by waste management in the automotive industry are explored. The analysis is based on (1) a characterisation of corporate response to environmental issues, and (2) the management of technology applied to the car manufacturing

  9. Environmental management of the stone cutting industry in Hebron, Palestine

    International Nuclear Information System (INIS)

    Nasserdine, K.; Mimi, Z.

    2007-01-01

    Environmental Management of stone cutting industry in Hebron, Palestine, is required to reduce the industry's adverse impacts on the downstream agricultural land and on the drinking water aquifers. This situation required the implementation of an industrial waste water management strategic approach and technology within the environmental need and available technical and financial resources. Ten pilot projects at different locations were built at Hebron to reduce or eliminate the incompatible discharge of the liquid and solid waste to the environment and improve the stone cutting industry's effluent quality. A review of existing practices and jar test experiments were used to optimize the water recycling and treatment facilities. The factors reviewed included influent pumping rates and cycles, selection of the optimal coagulant type and addition methods, control of sludge recycling process, control over flow rates, control locations of influent and effluent and sludge depth. Based on the optimized doses and Turbidity results, it was determined that the use of Fokland polymer with an optimal dose of 1.5 mg/L could achieve the target turbidity levels. The completion of pilot projects resulted in the elimination of 18% of the total stone cutting waste discharges in Hebron. The results included an improvement in the recycled effluent quality by 44.99%. This in turn reduced the long term operating costs for each participating firm. A full-scale project that will include all the stone cutting firms in Hebron industrial area is required. (author)

  10. Industrial Ecology and Environmental Lean Management: Lights and Shadows

    Directory of Open Access Journals (Sweden)

    Giuseppe Ioppolo

    2014-09-01

    Full Text Available Current industrial production is driven by increasing globalization, which has led to a steady increase in production volumes and complexity of products aimed at the pursuit of meeting the needs of customers. In this context, one of the main tools in the management of customer value is Lean Manufacturing or Production, though it is considered primarily as a set of tools to reduce the total cost of the resources needed to achieve such needs. This philosophy has recently been enriched in the literature with case studies that link Lean Management (LM with the improvement of environmental sustainability. The consequence is an expansion of the Computer Integrated Manufacturing (CIM; indeed, CIM, currently, combining and integrating the key business functions (e.g., business, engineering, manufacturing, and information management with a view of the life cycle, does not highlight the strategic role of the environmental aspects. In order to deal with the increasingly rapid environmental degradation that is reflected in society, in terms of both economy and quality of life, Industrial Ecology (IE introduced a new paradigm of principles and instruments of analysis and decision support (e.g., Life Cycle Assessment—LCA, Social Life Cycle Assessment -SLCA, Material Flow Account—MFA, etc. that can be considered as the main basis for integrating the environmental aspects in each strategy, design, production, final product, and end of life management, through the re-engineering of processes and activities towards the development of an eco-industrial system. This paper presents the preliminary observations based on a analysis of both theories (LM-IE and provides a possible assessment of the key factors relevant to their integration in a “lean environmental management”, highlighting both positives (lights and possible barriers (shadows.

  11. Environmental Monitoring and the Gas Industry: Program Manager Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Gregory D. Gillispie

    1997-12-01

    This document has been developed for the nontechnical gas industry manager who has the responsibility for the development of waste or potentially contaminated soil and groundwater data or must make decisions based on such data for the management or remediation of these materials. It explores the pse of common analytical chemistry instrumentation and associated techniques for identification of environmentally hazardous materials. Sufficient detail is given to familiarize the nontechnical reader with the principles behind the operation of each technique. The scope and realm of the techniques and their constituent variations are portrayed through a discussion of crucial details and, where appropriate, the depiction of real-life data. It is the author's intention to provide an easily understood handbook for gas industry management. Techniques which determine the presence, composition, and quantification of gas industry wastes are discussed. Greater focus is given to traditional techniques which have been the mainstay of modem analytical benchwork. However, with the continual advancement of instrumental principles and design, several techniques have been included which are likely to receive greater attention in fiture considerations for waste-related detection. Definitions and concepts inherent to a thorough understanding of the principles common to analytical chemistry are discussed. It is also crucial that gas industry managers understand the effects of the various actions which take place before, during, and after the actual sampling step. When a series of sample collection, storage, and transport activities occur, new or inexperienced project managers may overlook or misunderstand the importance of the sequence. Each step has an impact on the final results of the measurement process; errors in judgment or decision making can be costly. Specific techniques and methodologies for the collection, storage, and transport of environmental media samples are not

  12. Implementation of the Environmental Management Concept in the Hospitality Industry

    Directory of Open Access Journals (Sweden)

    Manuela Dora Orboi

    2015-10-01

    Full Text Available Globally, the concern for the environment is continually growing, among travel and tourism industry operators. Each unit hotel has its identity, its characteristics, and therefore, it is necessary to use and apply specific information about the environment, so as to create their own proactive environment protection policies. It must be performed an overview of environmental issues affecting the company and the performance that it has. Each unit hotel policy must be based on actual consumer demand for tourist services - as an active and conscious part - along with unit staff. Environmental action planning of a hotel unit has to go through several stages. The preparation of environmental actions of a hotel unit, involves biological control, which should help in making decisions on the most important measures that would benefit. Implementing the concept of environmental management in the hospitality unit requires including and taking the following steps: motivation, actions planning, analyze their performance and progress. They form an annual cycle of environmental management, which will go each year, to identify both the difficulties that have arisen and achievements and recommendations for the future.

  13. Quality Management, Environmental Management and Organizational Design in the Hotel Industry: A Qualitative Study

    OpenAIRE

    Tarí, Juan-José; Molina-Azorín, José F.; López-Gamero, María D.; Pereira-Moliner, Jorge; Pertusa-Ortega, Eva

    2014-01-01

    The purpose of this paper is twofold. First, the paper analyzes the relationship between quality management and environmental management and their effects on hotel performance. Second, the article examines the relationship between these two management systems and organizational design. The paper uses an exploratory, qualitative approach based on interviews with managers and experts in the hotel industry. Based on a content analysis of interviews, the results lead to several propositions. Spec...

  14. Towards innovative environmental management in the agro-food industry

    NARCIS (Netherlands)

    Bremmers, H.J.; Haverkamp, D.J.; Sabidussi, A.; Omta, S.W.F.

    2008-01-01

    This article focuses on the problem: what external (stakeholder) and internal (structural/organizational) factors drive companies in the food- and agribusiness towards innovative environmental management? Innovative companies are those considered to have adopted a supply-chain perspective, instead

  15. ISO 14000 - the International Environmental Management Standard: Potential impacts on environmental management and auditing in the electric power generation industry

    International Nuclear Information System (INIS)

    Gauntlett, S.B.; Pierce, J.L.; Pierce, J.L.

    1995-01-01

    In the framework of environmental management, the concept of voluntary environmental compliance auditing is not in itself a new development. Environmentally conscious firms have for more than a decade, undertaken voluntary audits to help achieve and maintain compliance with environmental regulations and to help identify and correct unregulated or poorly regulated environmental hazard. The firms undertaking the audits were motivated by a desire to mitigate legal and financial risks and/or the desire to be a highly responsible member of the corporate community. Much of the early attention to environmental auditing was in the chemical process industries. Today, there are four current trends affecting environmental auditing: (1) the practice is becoming widespread in all industry groups in both large and small firms; (2) environmental management and audit methodolgies and approaches are being codified in the form of written national and International standards; (3) environmental management programs and in-house audits are increasingly being certified by independent auditors (who are not associated with regulatory agencies); and (4) the certifications are being viewed as marketing and public relations tools. The adoption of ISO 14000 is destined to become the most significant development in international environmental management and auditing. International standards for the development of Environmental Management Systems and the execution of environmental audits do not currently exist. Individual countries, such as England and France, have national standards. One multi-national standard currently exists--the European Economic Community's Eco-Management and Audit Scheme (EMAS). The United States does not have a national environmental management and auditing standard

  16. Industrial effluent quality, pollution monitoring and environmental management.

    Science.gov (United States)

    Ahmad, Maqbool; Bajahlan, Ahmad S; Hammad, Waleed S

    2008-12-01

    Royal Commission Environmental Control Department (RC-ECD) at Yanbu industrial city in Kingdom of Saudi Arabia has established a well-defined monitoring program to control the pollution from industrial effluents. The quality of effluent from each facility is monitored round the clock. Different strategic measures have been taken by the RC-ECD to implement the zero discharge policy of RC. Industries are required to pre-treat the effluent to conform pretreatment standards before discharging to central biological treatment plant. Industries are not allowed to discharge any treated or untreated effluent in open channels. After treatment, reclaimed water must have to comply with direct discharge standards before discharge to the sea. Data of industrial wastewater collected from five major industries and central industrial wastewater treatment plant (IWTP) is summarized in this report. During 5-year period, 3,705 samples were collected and analyzed for 43,436 parameters. There were 1,377 violations from pretreatment standards from all the industries. Overall violation percentage was 3.17%. Maximum violations were recorded from one of the petrochemical plants. The results show no significant pollution due to heavy metals. Almost all heavy metals were within RC pretreatment standards. High COD and TOC indicates that major pollution was due to hydrocarbons. Typical compounds identified by GC-MS were branched alkanes, branched alkenes, aliphatic ketones, substituted thiophenes, substituted phenols, aromatics and aromatic alcohols. Quality of treated water was also in compliance with RC direct discharge standards. In order to achieve the zero discharge goal, further studies and measures are in progress.

  17. Environmental Management Systems in The Pulp and Paper Industry

    Directory of Open Access Journals (Sweden)

    Alessandra Buss Tessaro

    2013-12-01

    Full Text Available At the currently moment companies tend to seek a differential to compete in the market, emerging the environment as one of them. Environmental quality norms surged in the manufacturing process of products and inputs, being the protection to consumer one of the main benefits of normalization, once it standardized requirements to establish the quality of products and services. ISO 14.001 offers guidelines for environmental management systems, using auditing as a tool for verifying the effectiveness of management systems. This research targeted to analyze the use of environmental auditing by the cellulose and paper companies as a supportive tool in environmental management, investigate the reasons of usage as well as the benefits generated by it along with ABTCP, BRACELPA and SINPASUL. This study shows that the cellulose and paper companies that have invested in the production ecologically correct are achieving good results, financially and competitive. It is clear in the research that independently of the size of the company these results can be achieved for all the companies by adopting environmental auditing.

  18. Economic efficiency of environmental management system operation in industrial companies

    Science.gov (United States)

    Dukmasova, N.; Ershova, I.; Plastinina, I.; Boyarinov, A.

    2017-06-01

    The article examines the issue of the efficiency of the environmental management system (EMS) implementation in the Russian machine-building companies. The analysis showed that Russia clearly lags behind other developed and developing countries in terms of the number of ISO 14001 certified companies. According to the authors, the main cause of weak system implementation activity is attributed to the lack of interest in ISO 14001 certification on the Russian market. Five-year primary (field) research aimed at the analysis of the environmental priorities of the civilians suggests that the image component of the economic benefits ensures the increase in economic and financial performance of the company due to the increase in customers’ loyalty to the products of the EMS adopter. To quantify economic benefits obtained from EMS implementation, a methodological approach with regard to the image component and the decrease in semi-fixed costs due to the increase in the production scale has been developed. This approach has been tested in a machine-building electrical equipment manufacturer in Ekaterinburg. This approach applied to data processing yields the conclusion that EMS gives a good additional competitive advantage to its adopters.

  19. Integrated Environmental Risk Assessment and Whole-Process Management System in Chemical Industry Parks

    Science.gov (United States)

    Shao, Chaofeng; Yang, Juan; Tian, Xiaogang; Ju, Meiting; Huang, Lei

    2013-01-01

    Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on. PMID:23603866

  20. Integrated environmental risk assessment and whole-process management system in chemical industry parks.

    Science.gov (United States)

    Shao, Chaofeng; Yang, Juan; Tian, Xiaogang; Ju, Meiting; Huang, Lei

    2013-04-19

    Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on.

  1. Integrated Environmental Risk Assessment and Whole-Process Management System in Chemical Industry Parks

    Directory of Open Access Journals (Sweden)

    Lei Huang

    2013-04-01

    Full Text Available Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on.

  2. Understanding and managing environmental liability in the Saskatchewan oil and gas industry

    International Nuclear Information System (INIS)

    Andrychuk, L.D.; LeBlanc, L.B.

    1998-01-01

    An overview of Saskatchewan legislative framework regarding the oil and gas industry was presented. In the oil and gas industry, environmental issues are regulated at the provincial level, but the industry must also be aware of federal environmental law when dealing with federal lands, federal financial assistance, interprovincial or international projects or projects which have transboundary environmental effects. In this context, the provisions of the Oil and Gas Conservation Act (OGCA) and the Oil and Gas Conservation Regulations (OGCR), the licensing of oil and gas wells, the acquisition and surrender of surface rights, and the procedures involved in environmental assessment approval were outlined. Emission control, air pollution abatement, the storage and disposal of hazardous materials, environmental issues in property transactions, and corporate environmental management are also subject to regulation under OGCA and OGCR. 42 refs

  3. Progress of environmental management and risk assessment of industrial chemicals in China.

    Science.gov (United States)

    Wang, Hong; Yan, Zhen-Guang; Li, Hong; Yang, Ni-Yun; Leung, Kenneth M Y; Wang, Yi-Zhe; Yu, Ruo-Zhen; Zhang, Lai; Wang, Wan-Hua; Jiao, Cong-Ying; Liu, Zheng-Tao

    2012-06-01

    With China's rapid economic growth, chemical-related environmental issues have become increasingly prominent, and the environmental management of chemicals has garnered increased attention from the government. This review focuses on the current situation and the application of risk assessment in China's environmental management of industrial chemicals. The related challenges and research needs of the country are also discussed. The Chinese government promulgated regulations for the import and export of toxic chemicals in 1994. Regulations for new chemical substances came into force in 2003, and were revised in 2010 based on the concept of risk management. In order to support the implementation of new regulations, Guidance for Risk Assessment of Chemicals is under development in an attempt to provide the concepts and techniques of risk assessment. With increasing concern and financial support from Chinese government, China is embarking on the fast track of research and development in environmental management of industrial chemicals. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Limits of environmental management for the brick marker industry of municipality of Itagui -Antioquia

    International Nuclear Information System (INIS)

    Caballero A, Humberto; Machado, Jenny; Paniagua P, Augusto

    2004-01-01

    The brick maker activity in the municipality of Itagui this located within the Jabalcona's river basin (river Medellin's affluent), this is the two types, artisan and technified, each one of them are technical economic and socially different but they generate negative environmental impacts to the atmosphere. An environmental management adapted is directly related with three sectors, they are the institutions (the environmental authorities, the universities and association of brick marker united AS - LUNSA, the community and the companies, they must have clear environmental management guidelines for each work that generates environmental impacts negatives. This paper shows environmental management guidelines for the brick maker industry in the municipality of Itagui, with base in the territorial ordaining plan (2000-2003) like a contribution to the environmental ordaining of the municipality

  5. THE DEVELOPMENT OF ENVIRONMENTAL MANAGEMENT SYSTEMS ON THE URALS INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    L.A. Mochalova

    2008-12-01

    Full Text Available The article presents the results of analysis of introduction and development of environmental management systems on the Urals enterprises by mining and smelting industry which was conducted by questioning of their representatives. Object of the research were showing up of positive and negative features in construction of corporative environmental management systems according to recommendations of standards ISO 14000 and comparison of our and foreign experience.

  6. Evaluation of waste management, manufacturing industries, from an environmental standpoint (Case Study: Savojbolagh city Alborz Province

    Directory of Open Access Journals (Sweden)

    mashaalah nikzad

    2016-06-01

    Full Text Available   Introduction and Purpose: The quantity and quality of industrial wastewater is variable owing to the different lines of production and product variety of industry. Meeting the effluent standards requires proper environmental management. The current study aimed to evaluate the industrial wastewater management in Savojbolagh, Alborz, Iran from an environmental perspective in 2013-2014. Methods: This study was cross-sectional. The data were collected through field visits, questionnaire (of Iran's Environmental Protection Agency, and controlling data from industrial plants with more than 50 workers (totally 108 units. The questionnaire included questions about the quantity, quality, and management of wastewater. Based on an environmental perspective, the way of managing industrial wastewater was classified into four index: wastewater production, per capita production, BOD (Biochemical oxygen demand per capita, and COD (Chemical Oxygen Demand per capita which were rated from1 to 6. For each index, a higher score was defined for better management. Results: The wastewater produced by industries was estimated to be 1942 cubic meters per day. Food industry alone produced 59% of the entire industrial wastewater. The industry related to animal slaughtering was shown to have the highest BOD per capita, 320 g/day per every worker; and the cellulose industry enjoyed the highest COD per capita, 561 g/day per every worker. 76% of the industries under investigation had no strategy to reduce the wastewater production. 34% of these industries possessed treatment plants, while only 17% of them were following the effluent discharge standards. The most common method of treated and untreated wastewater disposal was found to be absorbing well. Conclusion: Based on this assessment, the management of wastewater was revealed to be favorable in non-metallic minerals industry, but unfavorable in agriculture industry as the wastewater produced by

  7. DAIRY INDUSTRY: ALTERNATIVES TO RECOVERY WHEY AS A MEANS OF ENVIRONMENTAL MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Liliane Marquardt

    2012-01-01

    Full Text Available Small and medium industries of dairy products in Brazil are facing serious problems of competition for the consumer market due to factors such as small scale production, lack of standardization of products and processes, deficiencies in effective control of quality, difficult to define niche markets and different levels of technology, although they are generating jobs and income. In addition to these factors, it appears that the control of environmental impacts caused by these industries, given the current environmental legislation, has forced a change of attitude on the part of entrepreneurs, in order to control pollution, despite the shortcomings often perceived in infrastructure linked to industrialization, such as high energy and water. The treatment and disposal of effluents and solid waste disposal, which are critical in industrial processes, are often overlooked in small and medium industries, generating significant environmental impacts. Among the main environmental impacts generated by the dairy industry stands to generate significant amounts of wastewater with high organic load. In this sense, the main objective of this study was a literature survey concerning the main factors of environmental impact of small and medium industries in the dairy sector, aiming to propose alternative environmental management that favors the minimization of the factors generating these impacts.

  8. Environmental management practices in the Lebanese pharmaceutical industries: implementation strategies and challenges.

    Science.gov (United States)

    Massoud, May A; Makarem, N; Ramadan, W; Nakkash, R

    2015-03-01

    This research attempts to provide an understanding of the Lebanese pharmaceutical industries' environmental management strategies, priorities, and perceptions as well as drivers, barriers, and incentives regarding the implementation of the voluntary ISO 14001 Environmental Management System. Accordingly, a semistructured in-depth interview was conducted with the pharmaceutical industries. The findings revealed a significant lack of knowledge about the standard among the industries. The main perceived drivers for adopting the ISO 14001 are improving the companies' image and overcoming international trade. The main perceived barriers for acquiring the standard are the lack of government support and the fact that ISO 14001 is not being legally required or enforced by the government. Moreover, results revealed that adopting the ISO 14001 standard is not perceived as a priority for the Lebanese pharmaceutical industries. Although the cost of certification was not considered as a barrier for the implementation of ISO 14001, the majority of the pharmaceutical industries are neither interested nor willing to adopt the Standard if they are not exposed to any regulatory pressure or external demand. They are more concerned with quality and safety issues with the most adopted international standard among the industries being the ISO 9001 quality management system. This study highlights the aspect that financial barriers are not always the hurdles for implementing environmental management strategies in developing countries and underscores the need for regulatory frameworks and enforcement.

  9. Environmental Management

    DEFF Research Database (Denmark)

    Lehmann, Martin

    The doctoral research project is co-financed by DUCED-I&UA and is part of a joint effort of Thai, Malay, South African and Danish universities to conduct collaborative research on the overarching theme "Environmental Management: Globalisation and Industrial Governance in Developing Countries......". The PhD project is expected to conclude ultimo 2005. Environmental management and cleaner production (CP) are both internationally recognised as tools for minimising environmental impacts of production or services. However, several studies have shown that especially SMEs, which probably amount to more...

  10. Study on implementation of environmental management system in textile industry in Sudan

    International Nuclear Information System (INIS)

    Mohamed, H. A.

    2010-11-01

    This conducted from June to December, the main objective of this study is to formulate manual for textile industry in Sudan. The data used in this study is secondary data from references, books manuals, web sites and reports. This theoretical data can be executed practically. The quality of life on earth is linked inextricably to the overall quality of the environment. One of the major problems facing the industrial world today is the contamination of soil, ground water, sediments, surface water and air with hazardous toxic chemicals dumped by industries as waste. While regulatory step have been implemented in the recent past to reduce or eliminate the production and release of these chemicals into the environment, significant deterioration of the environment has already occurred so far. Conventional treatments have been used by some industries, but these can be both, expensive and inherently disruptive to the environment. Thus, economical and ecological management of industrial wastes has become a major concern these days. Integrating both economical and ecological methods in waste management by implementation environmental management system in textile sector, to enable textile industry to establish waste minimization programmes, reduction of pollution and reduced environmental impact. Effective waste minimization programmes an essential aspect of any EMS compliance with ISO 14000, reduction in the risk of pollution reliability, enhanced international acceptability, competitiveness and trade. environmental sustain ability and international and national acceptance to this are presented here, which can be used a good database by the organizations which can put into use these approaches for the efficient ecological management of their industrial wastes. The main objective of this to make Sudanese textile industry environmentally friend by establish manual for this. (Author)

  11. Environmental management in the Australian minerals and energy industries: principles and practices

    Energy Technology Data Exchange (ETDEWEB)

    Mulligan, D.R. [ed.] [University of Queensland, St. Lucia, Qld. (Australia). Centre for Mined Land Rehabilitation, Dept. of Agriculture

    1996-12-31

    This is a comprehensive reference text on the principles and practices of environmental management being developed and implemented in Australia`s mining and energy industries. It also present a set of case histories focused on individual minerals (coal, sand, aluminium, iron ore, base metals, uranium, mineral sands, construction materials and petroleum). The 5 of the 20 chapters of particular relevance to the coal industry have been abstracted separately for the IEA Coal Research CD-ROM. 800 refs.

  12. A new approach to improving environmental management in the oil and gas industry in Thailand

    International Nuclear Information System (INIS)

    Uraiphan Wuttishingchai

    1997-09-01

    This research was undertaken in an attempt to find new environmental approaches, strategies and procedures suitable for the upstream Oil and Gas Industry in Thailand and which would be most applicable (practical and reasonable) and suitable to the situation of the country. Current management frameworks in various developed countries were reviewed, compared and analysed to select criteria most applicable to Thailand. The research has found that Thailand's industry is smaller scale and younger than the others, and its provisions for environmental management are only very basic in comparison. The Department of Mineral Resources (DMR) under the Ministry of Industry is the only key authority directly acting as a 'one-stop-shop' responsible for the upstream oil and gas industry in Thailand. The functions concerned with environmental protection involve the enforcement of Petroleum Acts and Regulations, and safety and environmental standards but, because of the lack of environmental regulations, rules and standards for petroleum development, DMR can not be regarded as an active agency dealing with environmental matters. (author)

  13. Progress of environmental management and risk assessment of industrial chemicals in China

    International Nuclear Information System (INIS)

    Wang Hong; Yan Zhenguang; Li Hong; Yang Niyun; Leung, Kenneth M.Y.; Wang Yizhe; Yu Ruozhen; Zhang Lai; Wang Wanhua; Jiao Congying

    2012-01-01

    With China’s rapid economic growth, chemical-related environmental issues have become increasingly prominent, and the environmental management of chemicals has garnered increased attention from the government. This review focuses on the current situation and the application of risk assessment in China’s environmental management of industrial chemicals. The related challenges and research needs of the country are also discussed. The Chinese government promulgated regulations for the import and export of toxic chemicals in 1994. Regulations for new chemical substances came into force in 2003, and were revised in 2010 based on the concept of risk management. In order to support the implementation of new regulations, Guidance for Risk Assessment of Chemicals is under development in an attempt to provide the concepts and techniques of risk assessment. With increasing concern and financial support from Chinese government, China is embarking on the fast track of research and development in environmental management of industrial chemicals. - This paper reviews the current situation of industrial chemical management in China, and discusses the application of risk assessment and further research needs in this field.

  14. The Influence of Corporate Governance Perception Index, Profit Management, and Industrial Type To Environmental Disclosure.

    Directory of Open Access Journals (Sweden)

    Amanda Chrysanti

    2015-12-01

    Full Text Available Thisresearchaims to empirically analyze the influence ofCorporate Governance Perception Index, earnings management,and industry type on environmental disclosure. Environmental Disclosure is the dependent variables in this research were measured by scoring technique based on GRI3.1 Guidelines. For the independent variables in this research, using Corporate Governance Perception Index were measured by CGPI index score, earnings management were measured by discretionary accruals, and industry type were measured bycategorial. This research uses secondary data which population are companies entered Corporate Governance Perception Index in 2009-2012. While the sampling method used was purposive sampling method which is overall 44 sample choose. This research uses multiple regression method to test the hypothesis with SPSS computer program. From the analysis performed in this research, it can be concluded that Corporate Governance Perception Index has positively and significant influence to environmental disclosure. The other hand earnings management has no significant influence to environmental disclosure. The last one industry type has negatively and significant influence to environmental disclosure.

  15. Assessing and managing health and environmental risks from energy and other complex industrial systems

    International Nuclear Information System (INIS)

    1988-03-01

    There is a growing awareness that it is necessary to identify, assess, and manage the risks of energy and other complex industrial activities in order to minimize their potential to harm public health and the environment. Therefore, quantitative risk analysis with emphasis on risk management has become an important aspect in high level decision making for regulation in developed and developing countries. The International Atomic Energy Agency (IAEA), the United Nations Environment Programme (UNEP) and the World Health Organization (WHO) have initiated a project to promote the use of risk assessment and risk management in environmental health and safety decision making throughout the world. A meeting was held in Paris, France on October 13-17, 1986. The purpose of the meeting was to: a) Discuss the state of the art of national and international experience in conducting case studies in the field of assessing and managing industrial risks from energy and other complex industrial systems either at the plant level or in highly industrialized areas within a country; b) Present and discuss planned regional risk management case studies within a country or international research projects on risk management to be implemented in the future; and c) Review the Project Document on ''Assessing, Controlling, and Managing Health and Environmental Risks from Energy and Other Complex Industrial Systems''. The full texts, together with abstracts, of the papers given at the meeting are presented. The summary reviews briefly some of the major points that arose in papers or in the ensuing discussions. Where a consensus view resulted, conclusions were drawn. Major differences of opinion are also noted

  16. Assessing Sustainability in Environmental Management: A Case Study in Malaysia Industry

    Science.gov (United States)

    Turan, Faiz Mohd; Johan, Kartina; Lanang, Wan Nurul Syahirah Wan; Asmanizam, Asmadianatasha

    2017-08-01

    The scarcity in measuring the sustainability accomplishment has been restrained most of the companies in Malaysian industry. Currently, there are variety types of the measurement tools of the sustainability assessment that have been implemented. However, there are still not achieving the inclusive elements required by the worldwide claim. In fact, the contribution to the sustainability performance are only highlighted on the nature, financial along with society components. In addition, some of the companies are conducting their sustainability implementation individually. By means, this process approaching type is needed to be integrated into a systematic system approach. This paper is focussing on investigating the present sustainability tools in the environmental management system for Malaysian industry prior to the quantification of the sustainability parameters. Hence, the parameters of the sustainability have been evaluated then in order to accomplish this project. By reviewing on the methodology of this research it comprises of three phases where it starts with the analyzation of the parameters in environmental management system according to the Malaysian context of industry. Moving on to the next step is the quantification of the criterion and finally the normalisation process will be done to determine the results of this research either it is succeeded or vice versa. As a result, this research has come to the conclusion where the level of the sustainability compliance does not achieve the standard level of the targeted objectives though it has already surpassed the average level of the sustainability performance. In future, the understanding towards the sustainability assessment is acquired to be aligned unitedly in order to integrated the process approach into the systematic approach. Apart, this research will be able to help to provide a measurable framework yet finally bestowing the Malaysian industry with a continuous improvement roadmap in achieving

  17. Environmental Management and Sustainable Labels in the Ski Industry: A Critical Review

    Directory of Open Access Journals (Sweden)

    Stefano Duglio

    2016-08-01

    Full Text Available Sustainability is increasing in importance in relation to the competitiveness of winter tourism, particularly when considering mountain destinations. Exploring in more detail winter tourism related to ski resorts, operators are especially concerned about environmental issues caused by climate change. Therefore, they have gradually become aware of the importance of finding adequate solutions to cope with such issues as well as being able to sensitize tourists. The main goal of this paper is to analyze the different sustainable tools that can be adopted by the ski industry. In this field there appear to be two main approaches. The first line is that of sustainable labels being applied to local ski resorts; whereas the second consists in operators—such as the managers of cable cars—making use of specific labels or management systems that are environmentally oriented.

  18. Life Cycle Environmental Management

    DEFF Research Database (Denmark)

    Pedersen, Claus Stig; Jørgensen, Jørgen; Pedersen, Morten Als

    1996-01-01

    A precondition for environmentally conscious management is the awareness of the environmental impact potentials created by an industrial company. There is an obvious need for management tools to support the implementation of relevant environmental criteria into the industrial decision making...... processes. The discipline of life cycle environmental management (LCEM) focuses on the incorporation of environmental criteria from the life cycles of products and other company activities into the company management processes. This paper introduces the concept of LCEM as an important element...... of the complete set of environmental objects in an industrial manufacturing company....

  19. The Development of Improved Risk Assessment Methods for Use in Industrial Environmental Management Systems

    International Nuclear Information System (INIS)

    Manners, T.K.

    2006-01-01

    Industrial sites that store or use chemicals are controlled in the UK under the COMAH (Control Of Major Accident Hazards) Regulations 1999 [1] based on their holdings of 'Dangerous Substances'. The COMAH Regulations [1] came into force in 1999 and are the UK's response to the European Union's Seveso II Directive. The purpose of these Regulations [1] is to: - Identify Major Accident Hazards (MAH); - Ensure that control measures are in place to prevent a MAH; - Ensure that mitigatory measures are in place to limit effects if MAH do occur. The UK's Health and Safety Executive (HSE), and the Environment Agency (EA) jointly enforce the Regulations [1]. The fundamental requirement is given in the statement below, which is taken directly from the Regulations [1]. 'Every operator shall take all measures necessary to prevent major accidents and limit their consequences to persons and the environment'. This paper describes the development of a six-step screening methodology designed to identify Major Accidents To The Environment (MATTE) and improved consequence definitions that can be used in risk matrices to define the severity of an environmental fault. The method has been designed to be compatible with existing Environmental Management Systems (EMS) used in the chemical and nuclear industry. (authors)

  20. Environmental management

    NARCIS (Netherlands)

    Guicherit, R.

    1996-01-01

    Elements of a national environmental management system include: • monitoring networks to establish the prevailing environmental quality; • emission inventories, and projected emission inventories based on population growth, increase of traffic density, and economie growth; taking into account

  1. Industrial activity, gas emissions and environmental urban management. Operative condition's diagnostic of smelting activities in Tandil, Argentina

    International Nuclear Information System (INIS)

    Soledad Sosa, Beatriz; Guerrero, Elsa Marcela; Banda Noriega, Roxana

    2013-01-01

    Amongst urban environmental problems, those associated to industry are of particular interest in environmental management. Tandil, a city in Argentina, owes its economic and urban growth to metalworking activity, especially to smelting. Despite the crisis in the sector, activity continues to be the axis of local economic and urban growth. The present research characterizes, in production, operative and environmental terms, local smelting industries and assesses operative conditions of gas emissions management during 2010. There were analyzed 25 industries over 30. The sample was representative of five productive processes: aluminum (Al), aluminum/iron (Al Fe), aluminum/bronze (Al Cu+Sn), aluminum/iron/bronze (Al Fe Cu+Sn), and iron (Fe). The variables analyzed were: primary fusion mater, oven used and industry size. To obtain production data we applied structured interviews, and for industry sizes we used surveys. It was possible to describe the productive prospect of the sector at a local level: for most industries the destination of their production is automotive sector. Taking into account the relation between the size and the type of industry, the aluminum smelting companies are small. Regarding iron industries, all three company sizes are present in the sample and exists a medium size industry that occupies between 51 and 230 employees. The operative conditions and their compliance with current legislation regarding control of gas emissions require to identify monitoring indicators for the melting stage that allow knowing precisely the resulting contaminants and their environmental effects.

  2. Ceramic transactions: Environmental and waste management issues in the ceramic industry. Volume 39

    International Nuclear Information System (INIS)

    Mellinger, G.B.

    1994-01-01

    A symposium on environmental and waste management issues in the ceramic industry took place in Cincinnati, Ohio, April 19-22, 1993. The symposium was held in conjunction with the 95th Annual Meeting of the American Ceramic Society and was sponsored by the Ceramic Manufacturing Council, Legislative and Regulatory Affairs Committee with the Glass and Optical Materials, Basic Science, Cements, Nuclear, Refractory Ceramics, Structural Clay Products, Whitewares, Design, Electronics, Engineering Ceramics, and Materials and Equipment Divisions. This volume documents several of the papers that were presented at the symposium. Papers presented in this volume are categorized under the following headings: vitrification of hazardous and mixed wastes; waste glass properties and microstructure; processing of nuclear waste disposal glasses; waste form qualification; glass dissolution: modeling and mechanisms; systems and field testing of waste forms

  3. Environmental Management System of Petroleum Industries: A case study of Oil and Gas Exploration in the Zamrud Field Conservation Areas

    Directory of Open Access Journals (Sweden)

    Onny Setiani

    2015-12-01

    Full Text Available ABSTRACT Background:The Zamrud Field is one of the oil fields managed by Caltex Pacific Indonesia (CPI a production sharing contractor of Pertamina. It is located in the Coastal Plain and  Pekanbaru (CPP Block. The government of Indonesia has designated Zamrud as a conservation area. The petroleum industry in Zamrud fields has received 14001 ISO Certificate on Environmental Management System. The production sharing contract between CPI and the Government of Indonesia expired in August 2002 Methods: .This case study describes how CPI managed the development  of oil and gas production and compared to  the environmental management system for  petroleum industries  that should be taken  in the Zamrud conservation areas. Results: A number of specific measures were employed by CPI  to protect this sensitive area including a green seismic project, zero-discharge drilling, water management, preservation of nature and regular monitoring and impact assessment. There are two  important points that should be in consideration  for the environmental management system by CPI in the Zamrud areas, including top soil utilization to maintain biological and nutrients quality and re-vegetation in all areas of significant disturbances. Conclusion: oil and gas  exploration and production in conservation areas has to be managed through high commitment to good environmental  and social practices. Key words     : Environmental Management System (EMS, Petroleum Industries, Zamrud Field

  4. Integrating strategic environmental assessment with industry planning: a case study of the Pasquai-Porcupine forest management plan, Saskatchewan, Canada.

    Science.gov (United States)

    Noble, Bram F

    2004-03-01

    Strategic environmental assessment (SEA) is gaining widespread recognition as a tool for integrating environmental considerations in policy, plan, and program development and decision-making. Notwithstanding the potential of SEA to improve higher-order decision processes, there has been very little attention given to integrating SEA with industry planning practices. As a result, the benefits of SEA have yet to be fully realized among industrial proponents. That said, SEA practice is ongoing, albeit informally and often under a different label, and is proving to be a valuable tool for industry planning and decision-making. Based on a case study of the Pasquai-Porcupine forest management plan in Saskatchewan, Canada, this paper illustrates how an integrated approach to SEA can contribute to industry environmental decision-making and can enhance the quality and deliverability of industry plans.

  5. Environmental management plan of the mining and industrial uranium complex in Brazil

    International Nuclear Information System (INIS)

    Figuereido, N.; Hilton, M.; Wiikman, L.; Oliveira, M.; Taddei, J.

    1996-01-01

    The Mining and Industrial Complex of the Pocos de Caldas Plateau (CIPC) is located at Caldas, county in the southwest of Minas Gerais state. It is a plant of the Industrias Nucleares do Brazil S.A. -INB, the only installation in Brazil for the production of uranium concentrate (yellow-cake) as ammonium diuranate (Adu). The Environmental protection and control program in practice assures the environmental management plan, in operation, maintaining the Complex within technology standards required by updated environmental concepts. The mine is an open pit operation with a surface diameter of 1000 m and an actual average depth of 120 m. Some 44 x 10 6 m 3 of the overburden material were used in embankments structures to civil engineering works in the implantation of several installations in CIPC, and the other portion of the removed material was deposited in two pre-selected areas having both an upper area of about 2,0 x 10 6 m 2 . The annual average volume of waters transported to chemical treatment is about 9,0 x 10 5 m 3 . The mill, in its full operation, processes 2500 t of ore per day and the solid and liquid tailings are directed to a waste pond system where are contained approximately 2,0 x 10 6 m 3 (2,2 x 10 6 t) of solid wastes with an estimation of further 70 x 10 5 m 3 to be disposed. The upper surface of tailings pond is about 2,0 x 10 5 m 2 . Nowadays, the environmental protection and control program aims to the development of potential pollutant areas stabilization reintegrating them into their original features or adjusting them to other forms of laudable restoration. (authors). 1 fig

  6. Stimulating environmental management capability deployment: towards a differentiated environmental policy. The case of the Dutch food and drink industry

    NARCIS (Netherlands)

    Haverkamp, D.J.; Bremmers, H.J.; Omta, S.W.F.

    2009-01-01

    This paper investigates the influence of the institutional and network context on the adoption of environmental management capabilities. The aim is to gain insight into the managerial drivers for environmental pro-activeness and learn lessons for environmental policy renewal. A longitudinal

  7. Site remediation technologies and environmental management practices in the utility industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Sessions covered: chemical oxidation; DNAPL and source management; regulatory perspectives and state programs; manufactured gas plant site management; sediments, cyanides, and other issues at MGP sites; biotechnology applications; agricultural waste issues; risk communication and bioremediation; air emissions and air toxics management; project management and redevelopment; environmentally acceptable endpoint and risk-based site management; site assessment, background concentration and closure; risk communication and beneficial use by recycling; PCB and RCRA issues; and phytoremediation and bioremediation of wastes.

  8. Integrated Environmental Risk Assessment and Whole-Process Management System in Chemical Industry Parks

    OpenAIRE

    Shao, Chaofeng; Yang, Juan; Tian, Xiaogang; Ju, Meiting; Huang, Lei

    2013-01-01

    Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was develope...

  9. Decision Support for Environmental Management of Industrial Non-Hazardous Secondary Materials: New Analytical Methods Combined with Simulation and Optimization Modeling

    Science.gov (United States)

    Non-hazardous solid materials from industrial processes, once regarded as waste and disposed in landfills, offer numerous environmental and economic advantages when put to beneficial uses (BUs). Proper management of these industrial non-hazardous secondary materials (INSM) requir...

  10. Environmental Management Systems

    Science.gov (United States)

    This site on Environmental Management Systems (EMS) provides information and resources related to EMS for small businesses and private industry, as well as local, state and federal agencies, including all the EPA offices and laboratories.

  11. Waste management and environmental controls in the Australian uranium mining industry

    International Nuclear Information System (INIS)

    Walker, D.G.; Morison, I.W.

    1982-01-01

    The development of the waste management and related environmental controls applied to uranium mining and processing in Australia is described. Major uranium deposits occur in the Alligator Rivers Region of the Northern Territory, a world heritage tropical wetland area with deep significance to Aboriginal people. The formulation of environmental controls took into consideration the unique features of the region in addition to experiences from earlier uranium mining operations. A description is given of the operations at Rum Jungle, the pollutants released and their effects on the environment. Commonwealth and State responsibilities for waste management and environmental control and the establishment of Codes of Practice are noted and proposed water management and tailings management programs at the four Alligator Rivers sites are described

  12. Environmental management

    International Nuclear Information System (INIS)

    Girard, M.; Mondino, M.

    2000-01-01

    Nowadays, unlike in the past, companies have to operate in a context of sustainable development, in which the economic and social development, production and consumption have to take into account the medium and long term impact on environment. The article sets forth some considerations about these subjects, which are assuming a growing importance in the management of companies: the variable environment may for instance be a factor of discrimination between being competitive or not. In order to characterise the context within which the environmental management has to be applied, some basic concepts about environmental management systems, Life Cycle Assessment, and Eco labeling are illustrated. As an example of application of the methodology described, a brief reference to the Italgas Group Environmental Report is given [it

  13. Industrialization of western region of ukraine: problems of environmental consequences management

    Directory of Open Access Journals (Sweden)

    O. M. Malyarchuk

    2015-12-01

    Full Text Available The article focuses on the consequences of industrialization of the western region of the Ukrainian SSR – large-scale construction industry provided jobs for the active population of the region, led to the expansion of infrastructure of settlements and towns, strengthened social sphere and became a positive factor for the development of the western regions of Ukraine. However, due to the increased production capacity natural resources got depleted. The ability of ecosystems to self-healing and self-cleaning was not taken into account, which caused devastating impact on nature and human health. Uncontrolled industrial pollution of air, water and land resources became a common phenomenon for the urbanized western region. Promoting environmental knowledge and declaration of achievement of significant progress in official documents gave no mechanisms to solve environmental problems. Overcoming the difficulties of the past is connected with the Ukraine had been being a part of the USSR. The leading place took environmental issues. Poor environmental condition of the whole country was not only caused by the world’s largest man-made disaster on the Chernobyl nuclear plant in April 1986, but also intensive industrialization and collectivization. Full conversion of the economy and agriculture in the middle of the last century led to the growth of anthropogenic impact on the environment. A radical break steady of socio-political and socio-economic life took place in western Ukraine in the second half of the twentieth century. Party-Soviet government in a short time made a «socialist transformation» and social progress was considered only as a means to achieve this goal. A number of issues concerning environmental protection, safety of life, were ignored. Environmental protection, regulation of environmental and economic activities, guaranteeing rights of Ukrainian citizens to environmental safety is currently among the national priorities of the

  14. Coherence in product-oriented policies and environmental management systems in the car industry

    DEFF Research Database (Denmark)

    Smink, Carla Kornelia; Nielsen, Eskild Holm

    more traditional process-oriented policies and are a challenge for companies. The article presents some of the authors  investigations on how the car industry has dealt with both process-oriented and product-oriented policies. [1] EPR refers to extending producer responsibility for products beyond......Over the last decade, product-oriented policies as Extended Producer Responsibility (EPR) and Integrated Product Policy (IPP) are more and more recognised as a target for both corporate environmental strategy and government environmental policy. These product-oriented policies are distinct from...

  15. Environmental impacts of waste management in the hospitality industry: Creating a waste management plan for Bergvik Kartano

    OpenAIRE

    Adigwe, Christopher

    2014-01-01

    Many hospitality industries find it difficult to control or manage solid wastes, such as food, containers, paper, cardboard and scrap metals, which are waste generated on a daily basis depending on the industry. Most hospitality industries tend to lag behind when it comes to the collection of waste. Only a fraction of the¬¬ waste collected receives proper disposal. When waste is not collected sufficiently and the disposal is inappropriate the waste can accumulate and cause water, land and air...

  16. Implementing Cleaner Production as an Environmental Management Efforts in Small Industries of Cassava Chips

    Directory of Open Access Journals (Sweden)

    Rahmadyanti Erina

    2016-01-01

    Full Text Available Small and Medium Enterprises (SMEs is one of the major driving factors for Indonesian economy, especially in food processing industries. The cassava-based industry is one type of food and beverage industry with chips as its major product. The limitations of knowledge caused their activities to only aim at pursuing economic benefits and ignoring the environmental balance. The most appropriate preventive method used, according to the characteristics of SMEs in Indonesia, is Cleaner Production. This study aims to reduce the risk of environmental pollution caused by the waste production of small chips industries by implementing cleaner production. The method used in this study is quick scanning by analyzing mass balance, energy, and utilities that aim to find an inefficient process to minimize losses. Implementation of cleaner production may include good housekeeping, reducing, and reusing. Based on the assessment of alternative eligibility criteria, the equipment modifications are the main factor in implementing cleaner production that drives the profits by providing efficiency of cutting as much as 80 percent and optimizes the profits into 57.62 kg in a month or 691.44 kg in a year. If the price of cassava chips is IDR 40,000 in a kg, then it would save IDR 27,657,600 in a year.

  17. The intrinsic features of Environmental Management Systems that facilitate adoption and encourage innovation in primary industries

    NARCIS (Netherlands)

    Carruthers, Genevieve; Vanclay, Frank

    2012-01-01

    This paper examines the theoretical underpinnings of the adoption of innovations, and applies this knowledge to the uptake of Environmental Management Systems (EMS) amongst Australian farmers. We examine the specific features of the EMS process that might encourage or inhibit EMS adoption. We also

  18. Environmental Management Systems (EMS ISO 14001 Implementation in Construction Industry: A Malaysian Case Study

    Directory of Open Access Journals (Sweden)

    Sumiani Yusoff

    2015-03-01

    Full Text Available This study seeks to explore the crucial part in EMS implementation; i.e. environmental aspects and impacts, Good Environmental Practice to be developed in construction site, as well as the level of awareness or understanding amongst site staffs on ISO 14001 EMS implementation in their organizations. Data were collected via interviews, surveys and site visits. A number of environmental aspects and impacts, and Good Environmental Practices based on ISO 14001:2004 have been identified. The level of understanding of the site staffs on ISO 14001 EMS requirements has been found to be good except for matters concerning Schedule Waste Management. In conclusion, the successful implementation of ISO 14001 EMS mainly depends on staffs‘ understanding.

  19. Technologies development for environmental restoration and waste management: International university and research institution and industry partnerships

    International Nuclear Information System (INIS)

    Herndon, R.C.; Moerlins, J.E.; Kuperberg, J.M.

    1996-01-01

    The Institute for Central and Eastern European Cooperative Environmental Research (ICEECER) at Florida State University was formed in 1990 soon after the end of the Cold War. ICEECER consists of a number of joint centers which link FSU, and US as well as international funding agencies, to academic and research institutions in Hungary, Poland, the Czech Republic, Russia, and the other countries of Central and Eastern Europe and the Newly Independent States. Areas of interest include risk assessment, toxicology, contaminated site remediation/characterization, waste management, emergency response, environmental technology development/demonstration/transfer, and some specialized areas of research (e.g., advanced chemical separations). Through ICEECER, numerous international conferences, symposia, training courses, and workshops have also been conducted on a variety of environmental topics. This paper summarizes the mission, structure, and administration of ICEECER and provides information on the projects conducted through this program at FSU

  20. [Method for environmental management in paper industry based on pollution control technology simulation].

    Science.gov (United States)

    Zhang, Xue-Ying; Wen, Zong-Guo

    2014-11-01

    To evaluate the reduction potential of industrial water pollutant emissions and to study the application of technology simulation in pollutant control and environment management, an Industrial Reduction Potential Analysis and Environment Management (IRPAEM) model was developed based on coupling of "material-process-technology-product". The model integrated bottom-up modeling and scenario analysis method, and was applied to China's paper industry. Results showed that under CM scenario, the reduction potentials of waster water, COD and ammonia nitrogen would reach 7 x 10(8) t, 39 x 10(4) t and 0.3 x 10(4) t, respectively in 2015, 13.8 x 10(8) t, 56 x 10(4) t and 0.5 x 10(4) t, respectively in 2020. Strengthening the end-treatment would still be the key method to reduce emissions during 2010-2020, while the reduction effect of structure adjustment would be more obvious during 2015-2020. Pollution production could basically reach the domestic or international advanced level of clean production in 2015 and 2020; the index of wastewater and ammonia nitrogen would basically meet the emission standards in 2015 and 2020 while COD would not.

  1. Environmental Management System

    Science.gov (United States)

    Goals Recycling Green Purchasing Pollution Prevention Reusing Water Resources Environmental Management Stewardship » Environmental Protection » Environmental Management System Environmental Management System An Environmental Management System is a systematic method for assessing mission activities, determining the

  2. Cattle and the oil and gas industry in Alberta: a literature review with recommendations for environmental management

    International Nuclear Information System (INIS)

    Bertram, H.L.; Ceroici, W.J.; Coleman, R.N.; Coppock, R.W.; Florence, L.Z.; Johnson, R.L.; Khan, A.A.; Liem, A.J.; Schuler, M.M.; Smillie, R.D.; Wilson, M.A.; Yeung, P.P.Y.; Dabrowski, T.L.; Lyness, L.S.; Sevigny, J.H.

    1996-07-01

    Issues relating to the effect of the oil and gas industry on cattle production in Alberta, were discussed. A review of scientific literature, industry codes of practices and government regulations pertaining to the subject was compiled and the potential effects of substances on cattle production were examined. The substances used by Alberta's oil and gas industry in field activities such as exploration, drilling, property development, collection, transportation, refining and processing were described. The chemicals and their toxicological effects were identified. The atmospheric, groundwater and surface water pathways by which those substances are transported was studied. It was concluded that hydrogen sulfide, crude oil and salt water pose the greatest threat to cattle. The exact effects of aromatic hydrocarbons, liquid condensates, methane, carbon dioxide, heavy metals, glycols, methanol, and volatile organic compounds on cattle production, were not fully determined. Recommendations about environmental management, including the need for monitoring programs and research priorities, were presented. 166 refs., 49 tabs., 36 figs

  3. Waste management and environmental controls in the Australian uranium mining industry

    International Nuclear Information System (INIS)

    Walker, D.G.; Morison, I.W.

    1983-01-01

    An outline is given of the development of the waste management and related environmental controls currently applied to uranium mining and processing in Australia, reflecting three decades of experience. The Ranger Uranium Environmental Inquiry of the mid-1970s was, inter alia, a focus for the expression of public concerns over the environmental effects of uranium mining. The report of the Inquiry established a framework for controls over uranium mining in the Northern Territory and, by association, in other States of the Commonwealth. The interaction between Federal and State jurisdictions, and the establishment of Codes of Practice and their implications are briefly described. Current procedures are based on the experience of other countries but are much influenced by studies of the environmental impact of uranium production in Australia during the 1950s and 1960s. In addition, laboratory investigations have been made of specific processes, such as the impact of heavy metal contaminants on biota and the uptake of radium in the human food cycle. Such studies are continuing and research is being expanded, particularly in relation to Northern Territory developments. Australia is contributing the results of this work to appropriate international forums. (author)

  4. Environmental assessment: Industry perspective

    International Nuclear Information System (INIS)

    Meadley, T.

    1994-01-01

    The Canadian mining industry supports the concept of environmental assessment, but the current process at the time of the conference had a number of problems that the industry felt should be addressed. The author makes the following suggestions: that the process for individual projects should be separated from policy issues; that panel members should be drawn from a full-time staff; that there should be better referral criteria to determine which projects require full scale assessment including public hearings; that either the government or project opponents should participate but not both; that the financial burden on proponents should be reduced; that funding of intervenors should be controlled; that there should be a definite time frame

  5. Challenges in waste management and environmental restoration in the uranium mining industry

    International Nuclear Information System (INIS)

    Jarrell, J.

    2011-01-01

    Two components dominate the waste management efforts at conventional Canadian uranium mining and milling operations. These are the waste rock generated in the mining of ore as well as the mill tailings -- which are the residue solids remaining after uranium extraction. Much has changed in the management of these wastes over the years. Visually, current sites are generally more compact than those developed earlier, due to higher grade ores and less land disturbance. However, the more significant strides being made to better manage uranium mining wastes deal more with improved chemical and physical controls rather than those changes which are visible. Segregation of waste rock to separate out potentially problematic material within the more weakly mineralized halo surrounding the ore is now a core strategy. This segregation is based on both the waste rock's chemical and radiological characteristics. Better controls have also been introduced on tailings physical properties to minimize their permeability, along with better chemical controls to minimize tailings contaminant solubility. Efforts to engineer tailings properties are coupled with contrasting hydraulic conductivity between the consolidated tailings mass and surrounding geologic materials. This creates the necessary long-term containment controls built into modern tailings management facilities. Current challenges include selecting the correct decommissioning assumptions such as future land use and required environmental acceptance criteria, along with decisions as to when to carry out reclamation work in the life cycle of the mine and mill. Public discussion of restoration plans throughout the life of the facility is essential to build acceptable solutions. Along with challenges come successes. Most recently, improvements have been made in reducing treated water molybdenum and selenium levels. Other successes include the application of reverse osmosis technology on a large scale, recycling of uranium

  6. Challenges in waste management and environmental restoration in the uranium mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Jarrell, J. [Cameco Corp., Saskatoon, SK (Canada)

    2011-07-01

    Two components dominate the waste management efforts at conventional Canadian uranium mining and milling operations. These are the waste rock generated in the mining of ore as well as the mill tailings -- which are the residue solids remaining after uranium extraction. Much has changed in the management of these wastes over the years. Visually, current sites are generally more compact than those developed earlier, due to higher grade ores and less land disturbance. However, the more significant strides being made to better manage uranium mining wastes deal more with improved chemical and physical controls rather than those changes which are visible. Segregation of waste rock to separate out potentially problematic material within the more weakly mineralized halo surrounding the ore is now a core strategy. This segregation is based on both the waste rock's chemical and radiological characteristics. Better controls have also been introduced on tailings physical properties to minimize their permeability, along with better chemical controls to minimize tailings contaminant solubility. Efforts to engineer tailings properties are coupled with contrasting hydraulic conductivity between the consolidated tailings mass and surrounding geologic materials. This creates the necessary long-term containment controls built into modern tailings management facilities. Current challenges include selecting the correct decommissioning assumptions such as future land use and required environmental acceptance criteria, along with decisions as to when to carry out reclamation work in the life cycle of the mine and mill. Public discussion of restoration plans throughout the life of the facility is essential to build acceptable solutions. Along with challenges come successes. Most recently, improvements have been made in reducing treated water molybdenum and selenium levels. Other successes include the application of reverse osmosis technology on a large scale, recycling of uranium

  7. Environmental Management System Adoption and the Operational Performance of Firm in the Textile and Apparel Industry of China

    Directory of Open Access Journals (Sweden)

    Biao Li

    2017-06-01

    Full Text Available In China, more firms in the textile and apparel industry adopt environmental management systems compared to firms that manufacture other products. It is important to know how the firms’ financial and real performances are affected. We study the changes of firms’ performance in profitability, sales, and operational efficiency after environmental management system (EMS adoption using an event study. Based on 22 events of EMS adoption, we found a significant decrease in firms’ profitability, sales, and inventory productivity. We explore the reasons which led to the decrease in firm performances. We found that the increase in sample firms’ total assets is the major reason. The loss in operational efficiency and flexibility are due to the requirements of the EMS.

  8. Industrial Innovation and Environmental Regulation: Developing ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    What role should governments play in protecting the environment and controlling the environmental impacts of industry? Do regulations benefit the environment, and how do they affect industrial innovation? Since the modern era of environmental management began in the early 1970s, regulations have been used with ...

  9. Cattle and the oil and gas industry in Alberta: A literature review with recommendations for environmental management

    International Nuclear Information System (INIS)

    1996-01-01

    The purpose of this report is to bring together a review of published information on the potential effects of upstream oil and gas industry operations on the cattle industry in Alberta, some indication of the probability of occurrence of these effects, and recommendations on how they might be avoided or mitigated. Based on reviews of scientific papers and industry good-practice manuals, the report describes: The sources and quantities of environmental contaminants generated by Alberta's oil and gas industry, including normal operations, accidental releases, and the effects of aging infrastructure; the chemical composition of the products, materials, and wastes associated with the industry; the fate and transport of the contaminants through air, water, and soil; cattle operations in Alberta; the toxicology of oil and gas industry contaminants in cattle; and selected Alberta case studies of accidental releases and planned experiments. Conclusions and recommendations deal with critical information gaps and strategies for the sustainable management of cattle and oil/gas operations in the province

  10. An environmental assessment of electricity production from slaughterhouse residues. Linking urban, industrial and waste management systems

    International Nuclear Information System (INIS)

    Santagata, R.; Ripa, M.; Ulgiati, S.

    2017-01-01

    Highlights: • Animal by-products use for electricity generation is investigated as a case-study. • Different methodological approaches to deal with by-products are explored in LCA. • Adopting a holistic perspective is crucial to achieve a circular economy framework. - Abstract: The food processing industry continues to grow, generating large amount of organically rich waste flows per year: these processors face significant economic and environmental pressures for appropriate conversion and disposal of these waste flows. Solid waste disposal problems, mostly in highly urbanized environments, energy shortages (primarily oil) and/or high petroleum prices, as well as environmental issues such as the shrinking landfill capacity, can all be addressed by converting waste material into useful and saleable products. This paper brings to the attention a possible strategy in order to meet the general EU directives concerning the residues utilization and percentage contribution for the total energy consumption by 2020, by evaluating the use of animal by-products (category 3, as defined in the directive 2002/1774/EC) for energy purposes. Slaughterhouse waste represents an important potential source of renewable energy: on average, 40–50% of a live animal is waste, with a potential energy content close to diesel fuel. Treatment of animal waste from slaughterhouse and the subsequent conversion to electricity is investigated as a case study in the Campania Region (Italy): the animal waste undergoes a rendering process, to separate a protein-rich fraction useful for animal meal production and a fat-rich fraction, to be combusted in a diesel engine for power and heat generation (CHP). An environmental assessment of the entire process is performed by means of LCA, providing a quantitative understanding of the plant processing. The study aims to understand to what extent electricity production from animal fat is environmentally sound and if there are steps and/or components

  11. Environmental impacts of the deep-water oil and gas industry: a review to guide management strategies

    Directory of Open Access Journals (Sweden)

    Erik E. Cordes

    2016-09-01

    Full Text Available The industrialization of the deep sea is expanding worldwide. Expanding oil and gas exploration activities in the absence of sufficient baseline data in these ecosystems has made environmental management challenging. Here, we review the types of activities that are associated with global offshore oil and gas development in water depths over 200 m, the typical impacts of these activities, some of the more extreme impacts of accidental oil and gas releases, and the current state of management in the major regions of offshore industrial activity including 18 exclusive economic zones. Direct impacts of infrastructure installation, including sediment resuspension and burial by seafloor anchors and pipelines, are typically restricted to a radius of approximately 100 m on from the installation on the seafloor. Discharges of water-based and low-toxicity oil-based drilling muds and produced water can extend over 2 km, while the ecological impacts at the population and community levels on the seafloor are most commonly on the order of 200-300 m from their source. These impacts may persist in the deep sea for many years and likely longer for its more fragile ecosystems, such as cold-water corals. This synthesis of information provides the basis for a series of recommendations for the management of offshore oil and gas development. An effective management strategy, aimed at minimizing risk of significant environmental harm, will typically encompass regulations of the activity itself (e.g. discharge practices, materials used, combined with spatial (e.g. avoidance rules and marine protected areas and temporal measures (e.g. restricted activities during peak reproductive periods. Spatial management measures that encompass representatives of all of the regional deep-sea community types is important in this context. Implementation of these management strategies should consider minimum buffer zones to displace industrial activity beyond the range of typical

  12. Guidelines for integrated risk assessment and management in large industrial areas. Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems

    International Nuclear Information System (INIS)

    1998-01-01

    The IAEA, the United Nations Environment Programme (UNEP) within the framework of the Awareness and Preparedness for Emergencies at Local Level (APELL), the United Nations Industrial Development Organization (UNIDO) and the World Health Organization (WHO) decided in 1986 to join forces in order to promote the use of integrated area wide approaches to risk management. An Inter-Agency Programme, which brings together expertise in health the environment, industry and energy, all vital for effective risk management, was established. The Inter-Agency Programme on the assessment and Management of Health and Environmental Risks from Energy and Other Complex Industrial Systems aims at promoting and facilitating the implementation of integrated risk assessment and management for large industrial areas. This initiative includes the compilation of procedures and methods for environmental and public health risk assessment, the transfer of knowledge and experience amongst countries in the application of these procedures and the implementation of an integrated approach to risk management. The purpose of the Inter-Agency Programme is to develop a broad approach to the identification, prioritization and minimization of industrial hazards in a given geographical area. The UN organizations sponsoring this programme have been involved for several years in activities aimed at assessment and management of environmental and health risks, prevention of major accidents and emergency preparedness. These Guidelines have been developed on the basis of experience from these activities to assist in the planning and conduct of regional risk management projects. They provide a reference framework for the undertaking of integrated health and environmental risk assessment for large industrial areas and for the formulation of appropriate risk management strategies

  13. Guidelines for integrated risk assessment and management in large industrial areas. Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    The IAEA, the United Nations Environment Programme (UNEP) within the framework of the Awareness and Preparedness for Emergencies at Local Level (APELL), the United Nations Industrial Development Organization (UNIDO) and the World Health Organization (WHO) decided in 1986 to join forces in order to promote the use of integrated area wide approaches to risk management. An Inter-Agency Programme, which brings together expertise in health the environment, industry and energy, all vital for effective risk management, was established. The Inter-Agency Programme on the assessment and Management of Health and Environmental Risks from Energy and Other Complex Industrial Systems aims at promoting and facilitating the implementation of integrated risk assessment and management for large industrial areas. This initiative includes the compilation of procedures and methods for environmental and public health risk assessment, the transfer of knowledge and experience amongst countries in the application of these procedures and the implementation of an integrated approach to risk management. The purpose of the Inter-Agency Programme is to develop a broad approach to the identification, prioritization and minimization of industrial hazards in a given geographical area. The UN organizations sponsoring this programme have been involved for several years in activities aimed at assessment and management of environmental and health risks, prevention of major accidents and emergency preparedness. These Guidelines have been developed on the basis of experience from these activities to assist in the planning and conduct of regional risk management projects. They provide a reference framework for the undertaking of integrated health and environmental risk assessment for large industrial areas and for the formulation of appropriate risk management strategies. Refs, figs, tabs.

  14. Energy Management Programmes for Industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-05

    The IEA Policy Pathway publications provide details on how to implement specific recommendations drawn from the IEA 25 Energy Efficiency Policy Recommendations. This Policy Pathway, jointly produced by the International Energy Agency and the Institute for Industrial Productivity, develops the critical steps for policy makers implementing energy management programmes for industry. Optimising energy use in industry is essential to improve industrial competitiveness and achieve wider societal goals such as energy security, economic recovery and development, climate change mitigation and environmental protection. While there is significant potential to decrease energy consumption in this sector, opportunities to improve energy efficiency are still under-exploited. Energy management programmes have shown to be instrumental in addressing many of the barriers that inhibit wide-scale uptake of energy management in industry. The Policy Pathway builds on lessons learned from country experiences and provides actionable guidance on how to plan and design, implement, evaluate and monitor energy management programmes for industry.

  15. The Sector Players’ Perception on the Influence of Sugarcane Environmental Protocol in Corporate Environmental Management Process: A Study of Industry Managers in the Middle Region of Assis-SP

    Directory of Open Access Journals (Sweden)

    Edenis César Oliveira

    2016-05-01

    Full Text Available Brazilian agriculture has undergone an unprecedented environmental crisis. In this scenario, it is the agribusiness and sugarcane suppliers, working in the sugarcane industry, which have had a strong growth, with significant economic, social and environmental impacts. Studies have shown that the inclusion of environmental concerns in corporate management can bring competitiveness gains for organizations, as well as improve their image before their stakeholders. The social demand for a cleaner environment, coupled with increasing environmental regulation, have forced companies in this sector to perform and participate in extensive programmes for prevention and mitigation of environmental impacts. In this design, the Agro-environmental Protocol for the Paulista sugarcane industry has arisen, consisting of a cooperation agreement signed in June 2007 between the government of the State of São Paulo, represented by the Secretaries of State for the Environment; Agriculture and Supply; Industry Union of cane sugar; and the Sugar Cane Growers Organization's South-Central Region. The research presented here aimed to investigate the perception of managers of agribusinesses and suppliers located in the middle region of Assis-SP on the influence of the Agro-environmental Protocol in corporate environmental management process. Nineteen semi-structured interviews with the environmental managers of each signatory organization were applied. The results showed strong influence of the Agro-environmental Protocol in environmental management processes of organizations, especially with the implementation and enforcement actions to meet the directive techniques of the Agro-environmental Protocol, which has contributed to organizations internalize environmental issues and moving towards a more proactive stance.

  16. A Study on Alternative Approaches to Instill Environmental Concerns in the Domain of Production Management of Industrial Firms

    Directory of Open Access Journals (Sweden)

    Ronaldo Manzan

    2013-10-01

    Full Text Available This article presents a comparative analysis of alternative models of production with environmental concerns that may lead to higher effectiveness in initiatives undertaken by industrial firms towards the development of more sustainable operations. The objective is to organize the knowledge on the subject of such models and provide guidelines that may help managers in selecting the most fitting approach for their business, according to the strategy and conditions of the firm. Among the presented models, the Cleaner Production model stands out for promoting the approach of nurturing the concurrent strengthening of quality, productivity, and sustainability in the existing manufacturing processes by dealing more comprehensively with factors internal to the firm that may be directly controlled by the managers.

  17. Safety management in the industry

    International Nuclear Information System (INIS)

    Jaecklin, A.

    1996-01-01

    The safety management in the industry is characterised by the large number of processes and the materials used in them. Correspondingly large are the legal regulations. Through the thickets of today's controls, the industry moves inside a relatively tight network of technical regulations. The experience of environmental audits and industrial damage, however, shows that the greatest deficit lies in the organisational methods and less on the technical side. For the overcoming of risks one needs to recognise the weaknesses of a careful analysis. To this belongs the estimation of how far a possible scenario can be taken. The estimation of the possibilities of occurrence, however, comes up against particular problems in the industry, as the human factor in relationship with danger potentialities is very difficult to evaluate. Actual basic data or statistics are missing. This lack can only be made good with the building up of a safety management. The fundamental principles of such a management can be taken from the environmental management and especially from the standard for environmental management ISO 14001. Here it is important that safety management is integrated into the process-oriented business processes and thus becomes a part of the company culture. (author) 11 figs., tabs., 11 refs

  18. Environmental management in a printing company; transformation patterns in the Dutch industry

    NARCIS (Netherlands)

    de Bruijn, Theo; Green, Ken; Hofman, Peter; Groenewegen, Peter

    2001-01-01

    The concept of sustainability presents an enormous challenge for industry. Where in the past a sound economic performance ensured survival, in the near future the triple-bottom-line will determine whether a company is successful or not. Next to outstanding economic results, companies will have to

  19. Managing the environmental effects of the Norwegian oil and gas industry: from conflict to consensus

    International Nuclear Information System (INIS)

    Gray, John S.; Bakke, Torgeir; Beck, Hans Jakob; Nilssen, Ingunn

    1999-01-01

    In the early days of exploitation of the oil resources on Norway's continental shelf there was little control over environmental impacts. The oil companies expected effects of their activity to be found to a 1 Km radius round platforms. In the late 1980s data started appearing that suggested that effects were over much larger areas. These findings were disputed but subsequent studies showed that a more realistic figure of the area affected was 3 km radius giving roughly 10 times the area predicted by the companies. The Norwegian authorities reacted by imposing restrictions on discharges of oil-based drilling cuttings and since 1993 oil-based drilling mud or cuttings have not been intentionally discharged to sea on the Norwegian shelf. In 1996 Norway changed its offshore monitoring from field based monitoring of sediments to a regional monitoring of both sediments and the water column. The change makes it possible to obtain a better overview of the environmental conditions, at the same time it also reduces costs for the operators. (Author)

  20. Quality management in industry

    International Nuclear Information System (INIS)

    Saegesser, R.

    1992-01-01

    Using the example of the introduction of quality management in industry, the procedure in the Sulzer Concern is described. After an historical review, the principles of quality management drawn up at Sulzer, their implementation, the training from top to bottom and quality assurance used as an instrument of quality management are described. Supporting measures and the periphery are also mentioned. Finally, the initial experience gained from this introduction, which is not yet complete, is presented. 4 figs

  1. Industrial pollution of the Moselle River: the birth, development and management of an environmental problem, 1850-2000

    International Nuclear Information System (INIS)

    Garcier, J.R.

    2005-12-01

    In the 1850's, the water quality of surface waters in the Moselle river drainage basin began to suffer from the development of heavy industrial activities (coal and iron ore mining, steel and soda making). Industrial development also fuelled a demographic impetus that proved detrimental to the quality of surface waters. This study uses archival sources to analyse the ineffectiveness of the policies that were launched to regulate pollution. In a region traumatized by the Prussian annexation of a quarter of its surface (1870), industrial production enjoyed a symbolic protection that allowed water pollution to go unabated. The fuzzy status of pollution in law contributed to the immunity of industrialists. From the 1950's on, fear that the region might experience severe water shortages due to the growth of water consumption by industries and cities alike enabled more stringent policies to be devised. They still had to take into account the interests of the heavy industry and their effectiveness is questionable. Hydrological planning was based upon a functionalist vision of water resources that did not take environmental issues into account. The situation changed in the 1970's and 1980's, when European integration and the Sandoz catastrophe in the Rhine (November 1986) tipped the scale in favour of more vigorous environmental policies. This study develops the concepts of a 'regional system' and of the 'mode of construction' of an environmental problem. These prove to be valuable theoretical elements to ground environmental geography studies. (author)

  2. Managing environmental issues at large-scale industrial estates: Problems and initiatives in central and eastern Europe and the former Soviet Union

    International Nuclear Information System (INIS)

    Coyle, R.

    1996-01-01

    A great many large-scale industrial sites are undergoing major transformation and restructuring in central and eastern Europe and the former Soviet Union. The EBRD's portfolio of investment projects increasingly includes such sites, presenting the Bank with environmental challenges related to their size, complexity and history. Both technological improvements and changes in management structure are needed in order to address environmental, and health and safety, issues. The EBRD requires ''environmental due diligence'' on all of its projects under preparation. Requirements vary, depending on the nature of each project. (author)

  3. Exploration of Environmental Management

    OpenAIRE

    Li Shushu; Li Ruilong; Chen Rui

    2012-01-01

    On the basis of domestic and international research, this article takes research on peasant household and agricultural managements as base points, aims to build environmental management model, establish government-led, an effective environmental management mechanism between the government and peasant household. Analyzes the role of peasant household’ environmental management in the regional environmental improvement from the aspect of theoretical analysis and analyze significant factors affec...

  4. The relationship between top managers' environmental attitudes and environmental management in hotel companies

    OpenAIRE

    Park, Jeongdoo

    2009-01-01

    Environmental management and sustainability have been recent important issues in the hospitality industry. The hotel industry, as a main sector of the hospitality industry, has benefited from environmental initiatives through improving corporate image and increasing resource and energy efficiency. Among various environmental issues that have been addressed in the hotel industry, managerial influence on environmental management is rarely investigated. The purpose of this study was to ex...

  5. Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE`s Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES&H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report.

  6. Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

    International Nuclear Information System (INIS)

    1993-04-01

    This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE's Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES ampersand H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report

  7. Hazardous industrial waste management

    International Nuclear Information System (INIS)

    Quesada, Hilda; Salas, Juan Carlos; Romero, Luis Guillermo

    2007-01-01

    The appropriate managing of hazardous wastes is a problem little dealed in the wastes management in the country. A search of available information was made about the generation and handling to internal and external level of the hazardous wastes by national industries. It was worked with eleven companies of different types of industrial activities for, by means of a questionnaire, interviews and visits, to determine the degree of integral and suitable handling of the wastes that they generate. It was concluded that exist only some isolated reports on the generation of hazardous industrial wastes and handling. The total quantity of wastes generated in the country was impossible to establish. The companies consulted were deficient in all stages of the handling of their wastes: generation, accumulation and storage, transport, treatment and final disposition. The lack of knowledge of the legislation and of the appropriate managing of the wastes is showed as the principal cause of the poor management of the residues. The lack of state or private entities entrusted to give services of storage, transport, treatment and final disposition of hazardous wastes in the country was evident. (author) [es

  8. Radiological protection and environmental management

    International Nuclear Information System (INIS)

    Perez Fonseca, A.

    2010-01-01

    From the beginning of its industrial activity twenty five years ago, the Juzbado Factory of Enusa Group has always upheld a strong commitment with Radiological Protection and environmental respect and protection. Consequently, the evolution of dose shows a downward trend over the years. Although production has been increased gradually, the average doses to workers have stayed below 1 mSv. In order to identify and prevent the potential environmental impacts of its industrial activity and minimize its impact on the surroundings, the facility develops and environmental management system according to UNE-EN-ISO 14001 since 1999. (Author)

  9. Decision support for environmental management of industrial non-hazardous secondary materials: New analytical methods combined with simulation and optimization modeling.

    Science.gov (United States)

    Little, Keith W; Koralegedara, Nadeesha H; Northeim, Coleen M; Al-Abed, Souhail R

    2017-07-01

    Non-hazardous solid materials from industrial processes, once regarded as waste and disposed in landfills, offer numerous environmental and economic advantages when put to beneficial uses (BUs). Proper management of these industrial non-hazardous secondary materials (INSM) requires estimates of their probable environmental impacts among disposal as well as BU options. The U.S. Environmental Protection Agency (EPA) has recently approved new analytical methods (EPA Methods 1313-1316) to assess leachability of constituents of potential concern in these materials. These new methods are more realistic for many disposal and BU options than historical methods, such as the toxicity characteristic leaching protocol. Experimental data from these new methods are used to parameterize a chemical fate and transport (F&T) model to simulate long-term environmental releases from flue gas desulfurization gypsum (FGDG) when disposed of in an industrial landfill or beneficially used as an agricultural soil amendment. The F&T model is also coupled with optimization algorithms, the Beneficial Use Decision Support System (BUDSS), under development by EPA to enhance INSM management. Published by Elsevier Ltd.

  10. Industry Valuation Driven Earnings Management

    NARCIS (Netherlands)

    T. Jiao (Tao); G.M.H. Mertens (Gerard); P.G.J. Roosenboom (Peter)

    2007-01-01

    textabstractThis paper investigates whether industry valuation impacts firms’ earnings management decisions. Existing accounting literature assumes that industry valuation has a constant impact on this decision. We argue that a higher industry valuation increases the perceived benefits of earnings

  11. Environmental management systems in South Africa

    DEFF Research Database (Denmark)

    Jørgensen, Tine Herreborg; Smink, Carla

    2004-01-01

    The article presents som empirical findings regarding environmental management systems of four companies in the automotive industry in South Africa.......The article presents som empirical findings regarding environmental management systems of four companies in the automotive industry in South Africa....

  12. Study of the Continuous Improvement Trend for Health, Safety and Environmental Indicators, after Establishment of Integrated Management System (IMS) in a Pharmaceutical Industry in Iran.

    Science.gov (United States)

    Mariouryad, Pegah; Golbabaei, Farideh; Nasiri, Parvin; Mohammadfam, Iraj; Marioryad, Hossein

    2015-10-01

    Nowadays, organizations try to improve their services and consequently adopt management systems and standards which have become key parts in various industries. One of these management systems which have been noticed in the recent years is Integrated Management System that is the combination of quality, health, safety and environment management systems. This study was conducted with the aim of evaluating the improvement trend after establishment of integrated management system for health, safety and environment indicators, in a pharmaceutical industry in Iran. First, during several inspections in different parts of the industry, indicators that should have been noted were listed and then these indicators were organized in 3 domains of health, safety and environment in the form of a questionnaire that followed Likert method of scaling. Also, the weight of each index was resulted from averaging out of 30 managers and the viewpoints of the related experts in the field. Moreover, by checking the documents and evidence of different years (5 contemplation years of this study), the score of each indicator was determined by multiplying the weight and score of the indices and were finally analysed. Over 5 years, scores of health scope indicators, increased from 161.99 to 202.23. Score in the first year after applying the integrated management system establishment was 172.37 in safety part and in the final year increased to 197.57. The changes of environmental scope rates, from the beginning of the program up to the last year increased from 49.24 to 64.27. Integrated management systems help organizations to improve programs to achieve their objectives. Although in this study all trends of health, safety and environmental indicator changes were positive, but at the same time showed to be slow. So, one can suggest that the result of an annual evaluation should be applied in planning future activities for the years ahead.

  13. Facility Environmental Management System

    Data.gov (United States)

    Federal Laboratory Consortium — This is the Web site of the Federal Highway Administration's (FHWA's) Turner-Fairbank Highway Research Center (TFHRC) facility Environmental Management System (EMS)....

  14. Corporate environmental management

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    With increasing population and economic growth and related demand for energy and natural resources as well, pollution, waste production and environmental sustainability have become issues of uttermost importance. For quite some time self-regulation, i.e. voluntary implementation of environmental......: how does industry respond to the environmental challenge? The paper concludes that despite the apparent attractiveness of self-regulation in industry, voluntary options tend not to be widely adopted thus pointing to a continued strong need for an effective regulation of industry’s environmental...

  15. Policy Pathways: Energy Management Programmes for Industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-06

    The IEA Policy Pathway publications provide details on how to implement specific recommendations drawn from the IEA 25 Energy Efficiency Policy Recommendations. This Policy Pathway, jointly produced by the International Energy Agency and the Institute for Industrial Productivity, develops the critical steps for policy makers implementing energy management programmes for industry. Optimising energy use in industry is essential to improve industrial competitiveness and achieve wider societal goals such as energy security, economic recovery and development, climate change mitigation and environmental protection.While there is significant potential to decrease energy consumption in this sector, opportunities to improve energy efficiency are still under-exploited. Energy management programmes have shown to be instrumental in addressing many of the barriers that inhibit wide-scale uptake of energy management in industry. The Policy Pathway builds on lessons learned from country experiences and provides actionable guidance on how to plan and design, implement, evaluate and monitor energy management programmes for industry.

  16. Comprehensive Environmental Management Plan

    International Nuclear Information System (INIS)

    Hjeresen, D.L.

    1994-01-01

    The Environmental Management Program at Los Alamos National Laboratory is in the process of initiating and then implementing a Comprehensive Environmental Management Plan (CEMP). There are several environmental impact and compliance drivers for this initiative. The Los Alamos CEMP is intended to be a flexible, long-range process that predicts, minimizes, treats, and disposes of any waste generated in execution of the Los Alamos mission - even if that mission changes. The CEMP is also intended to improve stakeholder and private sector involvement and access to environmental information. The total quality environmental management (TQEM) process will benchmark Los Alamos to private sector and DOE operations, identify opportunities for improvement, prioritize among opportunities, implement projects, measure progress, and spur continuous improvement in Environmental Management operations

  17. Essays on environmental management

    OpenAIRE

    Marbuah, George

    2016-01-01

    This thesis contributes to the economic literature on invasive species, social capital connection to climate change and environmental good provision as well as energy demand management. It contains five independent papers connected by the broader theme of environmental management. Two papers (I and II) deal with invasive species while the third and fourth probes the effect of social capital on carbon dioxide emissions (CO₂) and individuals’ decision to contribute toward environmental protecti...

  18. Industrial ecology: Environmental chemistry and hazardous waste

    Energy Technology Data Exchange (ETDEWEB)

    Manahan, S.E. [Univ. of Missouri, Columbia, MO (United States). Dept. of Chemistry

    1999-01-01

    Industrial ecology may be a relatively new concept -- yet it`s already proven instrumental for solving a wide variety of problems involving pollution and hazardous waste, especially where available material resources have been limited. By treating industrial systems in a manner that parallels ecological systems in nature, industrial ecology provides a substantial addition to the technologies of environmental chemistry. Stanley E. Manahan, bestselling author of many environmental chemistry books for Lewis Publishers, now examines Industrial Ecology: Environmental Chemistry and Hazardous Waste. His study of this innovative technology uses an overall framework of industrial ecology to cover hazardous wastes from an environmental chemistry perspective. Chapters one to seven focus on how industrial ecology relates to environmental science and technology, with consideration of the anthrosphere as one of five major environmental spheres. Subsequent chapters deal specifically with hazardous substances and hazardous waste, as they relate to industrial ecology and environmental chemistry.

  19. ETHICAL ASPECTS OF ENVIRONMENTAL MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Cîrstea Ştefan-Dragoş

    2013-07-01

    Full Text Available The purpose of this article is to outline the main economical and social benefits that can be obtained by adopting an ethical attitude of the organisations which use a performant environmental management. From the idea that the human being is the master of nature, it was passed to the view according to which the human being must ensure a balance between consumption and the use of resources. In order to achieve our goal we identified the factors that lead to long term or even permanent destructive effects over the environment and we briefly present the reasons for which the organizations adopt and implement environmental management systems. Also, the difficulties encountered in implementing environmental strategies have been briefly enumerated and the competitive and economic advantages that can be achieved by adopting an efficient environmental management and the main reasons that grant to the environmental management a special significance were exposed. This theoretical paper emphasizes the importance of the adoption by organizations of a "green behavior" and reveals correlations between sustainability, economic growth and environmental performance in organizations. The analysis of the ethical aspects of environmental management shows the links that can be created between the development of an ethical culture of organizations and the achievement of the environmental excellence. The research provides an overview of the concept of environmental ethics and encloses it within the scope of environmental management. Someone needs to explain why an increasing number of organizations, both large and small, are setting up environmental management systems, making environmental investments and reducing risks over and beyond legal requirements, even when the benefits are not at all obvious, even in the long run. Also, this paper provides some practical examples of organizations environmental problems and points out how these organizations adapted their

  20. Environmental Requirements Management

    Energy Technology Data Exchange (ETDEWEB)

    Cusack, Laura J.; Bramson, Jeffrey E.; Archuleta, Jose A.; Frey, Jeffrey A.

    2015-01-08

    CH2M HILL Plateau Remediation Company (CH2M HILL) is the U.S. Department of Energy (DOE) prime contractor responsible for the environmental cleanup of the Hanford Site Central Plateau. As part of this responsibility, the CH2M HILL is faced with the task of complying with thousands of environmental requirements which originate from over 200 federal, state, and local laws and regulations, DOE Orders, waste management and effluent discharge permits, Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) response and Resource Conservation and Recovery Act (RCRA) corrective action documents, and official regulatory agency correspondence. The challenge is to manage this vast number of requirements to ensure they are appropriately and effectively integrated into CH2M HILL operations. Ensuring compliance with a large number of environmental requirements relies on an organization’s ability to identify, evaluate, communicate, and verify those requirements. To ensure that compliance is maintained, all changes need to be tracked. The CH2M HILL identified that the existing system used to manage environmental requirements was difficult to maintain and that improvements should be made to increase functionality. CH2M HILL established an environmental requirements management procedure and tools to assure that all environmental requirements are effectively and efficiently managed. Having a complete and accurate set of environmental requirements applicable to CH2M HILL operations will promote a more efficient approach to: • Communicating requirements • Planning work • Maintaining work controls • Maintaining compliance

  1. Comprehensive Environmental Management Process

    International Nuclear Information System (INIS)

    Hjeresen, D.L.; Roybal, S.L.

    1994-01-01

    This report contains information about Los Alamos National Laboratory's Comprehensive Environmental Management Plan. The topics covered include: waste minimization, waste generation, environmental concerns, public relations of the laboratory, and how this plan will help to answer to the demands of the laboratory as their mission changes

  2. Standardized Cost Structure for the Environmental Industry

    International Nuclear Information System (INIS)

    Skokan, B.; Melamed, D.; Guevara, K.; Mallick, P.; Bierman, G.; Marshall, H.E.

    2006-01-01

    The underlying key to developing successful estimates, tracking project costs, and utilizing historical project cost information is the development of standardized and well-defined hierarchical listing of cost categories. Committees within the U.S. Federal agencies have pioneered efforts toward developing the Environmental Cost Element Structure (ECES), which is key in achieving these goals. The ECES was developed using an iterative process with input from federal agencies and industry. Experts from several disciplines participated including engineers, cost estimators, project/program managers, and contract personnel. The ECES benefits from an intense analytical effort, the knowledge gained from the maturation of the environmental industry, and incorporation of past user's experiences. Building upon this foundation, the E06 committee of the ASTM International has now fully developed and published a standard (ASTM 2150-04) that provides standardized cost categories with complete cost category definitions. This standard affords environmental and nuclear D and D project managers the opportunity to have a well defined hierarchical listing of their estimates and actual costs, readily adapted to performing summations and roll-ups, supported by a multi-level dictionary specifically defining the content of the cost elements as well as the summations. Owing to the dynamic nature of the environmental technologies, efforts need to be made to continue to update this standard by adding new technologies and methods as they are developed and employed in the field. Lastly, the Environmental Cost Element Structure that is embodied in this standard also presents opportunities to develop historical cost databases and comprehensive life cycle cost estimates and standardized cost estimating tools. (authors)

  3. New share index to track progress of environmental industry

    International Nuclear Information System (INIS)

    Edge, Gordon

    1999-01-01

    This article discusses the work of the environmental finance house Imax Capital in persuading investors to invest in environmental industries. The development of the ET-50 Index by Impax Capital Asset Management to track progress of the environmental industry is reported, and the categories of the ET-50 including alternative energy generators and equipment providers, air and water pollution control, soil and site remediation, recycling and waste management, and environmental engineering and consulting are considered. The performance of the ET-50 Index, and the work of Impax and RER in the development of a dedicated renewable energy share index by are discussed

  4. Environmental management in the Dutch Food and Beverage industry. A longitudinal study into the joint impact of business network and firm characteristics on the adoption of environmental management capabilities

    NARCIS (Netherlands)

    Haverkamp, D.J.; Omta, S.W.F.

    2007-01-01

    Because of the growing societal concerns regarding industrial environmental pollution, it is essential to get a deeper understanding of the factors influencing firms to reduce their environmental impact. This book considers these concerns by evaluating the importance of these factors in reference to

  5. Industrial Innovation and Environmental Regulation: Developing ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2007-03-01

    Mar 1, 2007 ... Book cover Industrial Innovation and Environmental Regulation: ... in steering the behaviour of economic agents in industrial production. ... IDRC congratulates first cohort of Women in Climate Change Science Fellows.

  6. Study of industry safety management

    International Nuclear Information System (INIS)

    Park, Pil Su

    1987-06-01

    This book deals with general remarks, industrial accidents, statistics of industrial accidents, unsafe actions, making machinery and facilities safe, safe activities, having working environment safe, survey of industrial accidents and analysis of causes, system of safety management and operations, safety management planning, safety education, human engineering such as human-machines system, system safety, and costs of disaster losses. It lastly adds individual protective equipment and working clothes including protect equipment for eyes, face, hands, arms and feet.

  7. Environmental Compliance Management System

    International Nuclear Information System (INIS)

    Brownson, L.W.; Krsul, T.; Peralta, R.A.; Knudson, D.A.; Rosignolo, C.L.

    1992-01-01

    Argonne National Laboratory (ANL) is developing the Environmental Compliance Management System (ECMS) as a comprehensive, cost-effective tool to ensure (1) that the Laboratory complies with all applicable federal and state environmental laws and regulations, (2) that environmental issues and concerns are recognized and considered in the early phases of projects; and (3) that Laboratory personnel conduct Laboratory operations in the most environmentally acceptable manner. The ECMS is an expert computer system which is designed to allow project engineers to perform an environmental evaluation of their projects. The system includes a Master Program which collects basic project information, provide utility functions, and access the environmental expert modules, environmental expert system modules for each federal and state environmental law which allows the user to obtain specific information on how an individual law may affect his project; and site-specific databases which contain information necessary for effective management of the site under environmental regulations. The ECMS will have the capability to complete and print many of the necessary environmental forms required by federal and state agencies, including the Department of Energy

  8. Environmental Management Fact Sheets.

    Science.gov (United States)

    Department of Energy, Washington, DC.

    In recent years, the need for nuclear materials has decreased and the Department of Energy (DOE) has focused greater attention on cleaning up contamination left from past activities. The Office of Environmental Management (EM) within DOE is responsible for managing waste and cleaning up contamination at DOE sites across the nation. This collection…

  9. Environmental management system

    International Nuclear Information System (INIS)

    2004-01-01

    An Environmental Management System was implemented in ANAV in 1999, including the two nuclear sites of the Asco and Vandellos II nuclear power plants. This implementation entailed formulation of the ANAV Environmental Policy, preparation of an Environmental Management Plan (PLAGMA) supported by the Environmental Aspects Manuals (MASMA) of each site and their operating procedures, modification of the organizational structure to create the Environment Unit, in charge of implementing the SIGEMA, and the Environment Committee, the governing body that reviews the results obtained and environmental goals to be achieved, and direct involvement of all the different ANAV organization in continuous improvement of the SIGEMA implementation. Special attention is paid to evolution of the environmental indicators, to communication and specific training in environmental issues, and to waste management and the different programs for increasing waste recycling and assessment, as well as to minimization programs. The article details the different approaches used to improve the environmental results in these last five years, which have allowed ANAV to maintain the ISO-14001 Certification since 1999. (Author)

  10. Empirical Investigation of Industrial Management

    Directory of Open Access Journals (Sweden)

    Elenko Zahariev

    2014-07-01

    Full Text Available The paper is devoted to an aspect in the sphere of management – business priorities of industrial management in XXI century. In modern times the actuality of treated problems is mainly laid into the necessities of the real management practice in industrial organizations and the need theoretical and applied knowledge to be offered to that practice which would allow it methodologically right and methodically correct to implement the corresponding changes in management of a concrete organization. Objects of analyses and evaluations are some fragmented approbations of theses using the corresponding instruments. The characteristic features of the organizations’ profiles and the persons interviewed participated in the investigation are summarized. The determining approaches for Bulgarian organizations are considered too. On the basis of the critical analyses the fundamental tasks are drawn which are inherent to contemporary industrial managers. Attention is paid to key management functions for an effective managerial process. An analysis of managers reaching the best results in industrial management is presented as well as when they are reached. Outlined are also specific peculiarities of industrial management in theRepublicofBulgariaand parameters of the level of productiveness in conditions of business globalization and priority forms in marketing of the ready product / service in XXI century. The results of the launched idea for the necessity to create a new International management architecture (NIMA are determined – structure and structure defining parameters. The results of the investigation of main business priorities in industrial management are commented as well as expected problems in the process of functioning of industrial organizations in XXI century. At the end the corresponding conclusions are made in respect to the techniques used in determining effectiveness of industrial management in Bulgarian organizations.

  11. Environmental Sustainability In The Thai Hotel Industry

    OpenAIRE

    Jirawat Anuwichanont; Panisa Mechinda; Sirivan Serirat; Aurathai Lertwannawit; Nongluck Popaijit

    2011-01-01

    Nowadays, the growing concern of environmental sustainability does not only influence consumers demand but also how companies run their own business. Consumers are more conscious about the environment and demanding environmental friendly products and services. Consequently, the tourism industry currently faces increasing demands from consumers to achieve levels of environmental responsiveness. Thus, companies strive to implement environmentally friendly and socially responsible practices to g...

  12. Environmental management systems in South-Africa

    DEFF Research Database (Denmark)

    Jørgensen, Tine Herreborg; Smink, Carla Kornelia

    2003-01-01

    The paper presents and discusses some of the empirical findings regarding envi-ronmental management systems (EMS) of four companies in the automotive industry in South Africa and compares some of the findings to Danish and international experiences.......The paper presents and discusses some of the empirical findings regarding envi-ronmental management systems (EMS) of four companies in the automotive industry in South Africa and compares some of the findings to Danish and international experiences....

  13. Laboratory/industry partnerships for environmental remediation

    International Nuclear Information System (INIS)

    Beskid, N.J.; Zussman, S.K.

    1994-01-01

    There are two measures of ''successful'' technology transfer in DOE's environmental restoration and waste management program. The first is remediation of DOE sites, and the second is commercialization of an environmental remediation process or product. The ideal case merges these two in laboratory/industry partnerships for environmental remediation. The elements to be discussed in terms of their effectiveness in aiding technology transfer include: a decision-making champion; timely and sufficient funding; well organized technology transfer function; well defined DOE and commercial markets; and industry/commercial partnering. Several case studies are presented, including the successful commercialization of a process for vitrification of low-level radioactive waste, the commercial marketing of software for hazardous waste characterization, and the application of a monitoring technique that has won a prestigious technical award. Case studies will include: vitrification of low-level radioactive waste (GTS Duratek, Columbia, MD); borehole liner for emplacing instrumentation and sampling groundwater (Science and Engineering Associates, Inc., Santa Fe, NM); electronic cone penetrometer (Applied Research Associates, Inc., South Royalton, VT); and software for hazardous waste monitoring ConSolve, Inc. (Lexington, MA). The roles of the Department of Energy and Argonne National Laboratory in these successes will be characterized

  14. Environmental issues and the nuclear industry

    International Nuclear Information System (INIS)

    Castle, P.

    1995-01-01

    Health safety and environmental liabilities of the 'nuclear industry' reflect those of industry in general and may broadly be divided into two areas: criminal liability for regulatory non-compliance; and civil liability for damage caused to persons and their property (for example, neighbours, employees etc). In addition, environmental liability may be incurred as a result of powers of the regulatory authorities to clean up contamination and to recoup the cost. These are in addition to the regime of strict liability imposed, where relevant, by the Nuclear Installations Act 1965. In the case of environmental liabilities, 'owners;, 'occupiers', 'persons responsible', 'persons in control' may all be held to be liable and for the most part these terms remain undefined both under English law and European Community (now European Union) law. This potentially has ramifications for current and former owners and operators, their boards and senior managers, other employees, parent companies, shareholders and their lenders and investors - of particular relevance in the context of privatization. (author)

  15. Conference on Environmental Data Management

    CERN Document Server

    Oppenheimer, Dorothy; Brogden, William; Environmental Data Management

    1976-01-01

    Throughout the world a staggering amount of resources have been used to obtain billions of environmental data points. Some, such as meteorological data, have been organized for weather map display where many thousands of data points are synthesized in one compressed map. Most environmental data, however, are still widely scattered and generally not used for a systems approach, but only for the purpose for which they were originally taken. These data are contained in relatively small computer programs, research files, government and industrial reports, etc. This Conference was called to bring together some of the world's leaders from research centers and government agencies, and others concerned with environmental data management. The purpose of the Conference was to organize discussion on the scope of world environmental data, its present form and documentation, and whether a systematic approach to a total system is feasible now or in the future. This same subject permeated indirectly the Stockholm Conference...

  16. Environmental management in public hospitals: Environmental management in Colombia

    OpenAIRE

    Juan Pablo Rodríguez-Miranda; César Augusto García-Ubaque; María Camila García-Vaca

    2016-01-01

    Introduction: Activities in hospitals have environmental impacts which may pose risks to human and environmental health if they are not managed correctly. For this reason, it is necessary to implement an environmental management plan in hospitals that not only focuses on solid waste management but includes all aspects associated with health within institutions. Objective: To review environmental management aspects related to public hospitals in order to identify environmental management a...

  17. Environmental management system in companies

    International Nuclear Information System (INIS)

    Bonanno, C.

    1995-01-01

    The environmental management system, as the whole coordinated initiatives 'environmental oriented' introduced by companies in their organization, is discussed. Strategic weight that companies have to be present at the environmental management system is enlisted. Finally, the new professional figures of environmental technicians and environmental manager is discussed

  18. Environmental management systems

    OpenAIRE

    Misiak, Małgorzata

    2016-01-01

    Considering environmental protection requirements in business operations may, in the long run, determine if a lasting comparative advantage can be achieved. That is why our textbook, rich in case studies, identifies not only the threats a business may pose to the environment but stresses the ways of reducing its negative impact. It discusses, among other things, the concept of corporate social responsibility, environmental management systems, methods and the importance of eco-labelling goods ...

  19. Improving environmental strategies of the UK oil and gas industry

    International Nuclear Information System (INIS)

    Tanega, J.

    1992-01-01

    The paper is a strategic review of the current environmental policies and practices of the UK Oil and Gas Industry. It begins with an analysis of the current environmental impacts of the UK Oil and Gas Industry, including air emissions, effluents to sea and industrial wastes. The importance of environmental issues to UK operators is related to financial conseqeunces of environmental damage to the North Sea, poor public opinion and the spectre of increased government regulations. There is a survey of the best practices of environmental management programmes, including environmental assessment, monitoring auditing and contingency planning and emergency response, with historical lessons from Cadiz to Valdez and the industry's reaction to Exxon Valdez. After critically assessing the weaknesses of environmental management programmes, the author calls for systematic environmental assessment, employing inventory, monitoring, risk assessment and quantified risk assessment. There are recommendations on how to minimise the impact on the environment through the use of existing technology, training, incident response and crisis management, auditing, testing and industry-wide collaboration. (Author)

  20. Environmental and resource management

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    1996-01-01

    Artiklen bringer bl.a. de seneste resultater (i forkortet udgave) fra et igangværende flerårigt forskningsprojekt - The Danish Environmental Management Survey (DEMS) - der sigter efter løbende at analysere og vurdere den igangværende 'forgrønnelse' i erhvervslivet i et longitudinalt perspektiv...

  1. Radioactive wastes. Their industrial management

    International Nuclear Information System (INIS)

    Lavie, J.M.

    1982-01-01

    This paper introduces a series that will review the present situation in the field of long-term management of radioactive wastes. Both the meaning and the purposes of an industrial management of radioactive wastes are specified. This short introduction is complemented by outline of data on the French problem [fr

  2. Project management in building industry management

    Directory of Open Access Journals (Sweden)

    Martin Nový

    2012-01-01

    Full Text Available The article deals with contents of the project management on general level first. It mentions the most widespread project management standards, which have historically developed in global scale, their parts and objectives. Further, it describes position of the building industry in national economy, its specific features distinguishing it from the other industrial production, contents of the building industry management and project management of structures. The importance of the role of project manager is documented by characteristics of construction projects, their course, contents of sub-phases, and individual types of managing activities. Attention is devoted to project planning – determination of realization costs, necessary resources, sequence and time course of individual works. The most frequently used graphic methods of schedule presentation – Gantt chart, network chart and frequency bar chart are applied on examples of constructions. These charts can be focused in time sequence on individual types of resources – workforce, finance, materials, energies, and machinery. In conclusion, necessity to manage the project management procedures is emphasized as a part of skills of a construction engineer in the role of preparation manager or construction project realization manager.

  3. Trends in risk management in nuclear industry

    International Nuclear Information System (INIS)

    Kim, Inn Seock

    1996-01-01

    Safety management may be classified into three dimensions: risk management, accident management, and emergency management. This paper addresses the recent trends of safety management in nuclear industry, focussing on risk management and accident management

  4. Training for effective environmental protection in the nuclear industry

    International Nuclear Information System (INIS)

    Parkinson, D.; Brake, J.; Hickman, C.; Tamm, J.

    2007-01-01

    This paper examines the role of environmental training in the delivery of effective environmental protection programs for construction projects in the nuclear industry. The paper uses a case study approach, based on Point Lepreau Generating Station's Refurbishment Project, to demonstrate how the underpinning principles of 'training, awareness and competence' can be delivered within a structured environmental management framework, to achieve sustained excellence in environmental management and performance. Key issues addressed by the paper include the early identification of different target audiences, making effective use of communication themes, and the importance of reinforcement and follow-up in support of training goals. (author)

  5. View graph presentations of the sixth DOE industry/university/lab forum on robotics for environmental restoration and waste management

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    The mission of the Robotics Technology Development Program involves the following: develop robotic systems where justified by safety, cost, and/or efficiency arguments; integrate the best talent from National Labs, industry, and universities in focused teams addressing complex-wide problems; and involve customers in the identification and development of needs driven technologies. This presentation focuses on five areas. They are: radioactive tank waste remediation (Richland); mixed waste characterization, treatment, and disposal (Idaho Falls); decontamination and decommissioning (Morgantown); landfill stabilization (Savannah River); and contaminant plumes containment and remediation (Savannah River).

  6. View graph presentations of the sixth DOE industry/university/lab forum on robotics for environmental restoration and waste management

    International Nuclear Information System (INIS)

    1995-10-01

    The mission of the Robotics Technology Development Program involves the following: develop robotic systems where justified by safety, cost, and/or efficiency arguments; integrate the best talent from National Labs, industry, and universities in focused teams addressing complex-wide problems; and involve customers in the identification and development of needs driven technologies. This presentation focuses on five areas. They are: radioactive tank waste remediation (Richland); mixed waste characterization, treatment, and disposal (Idaho Falls); decontamination and decommissioning (Morgantown); landfill stabilization (Savannah River); and contaminant plumes containment and remediation (Savannah River)

  7. Industrial Application Of Environmentally Conscious Design

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles

    in the design process is key to environmentally conscious design;- the environmental profile of a product is affected the most in the very early stages of the design process, particularly in the pre-specification stage, where tools for environmentally conscious design decision-making are lacking...... when companies have integrated environmental considerations into the design process.In the context of advanced practitioners of environmentally conscious design in the Western European and North American electrical/electronics industry sector, it is shown that:- the timing of environmental decisions...... into their product development processes. This starts with motivation, leading to widening communication and information flows and finally to whole-life thinking....

  8. Peat in environmental management

    International Nuclear Information System (INIS)

    Rinttilae, R.

    1998-01-01

    Peat is the largest natural resource of Finland. The DS-reserves of peat are more than seven times larger than those of wood. Peat is known as a domestic source of energy. Peat is, however, more than an energy source. The most significant problem of water protection in Finland is the eutrophication of the water courses. The reduction of concentrated loads and large emissions sources has up to now been the target for the water protection. The control of diffuse loads has been more difficult. The environmental use of peat can reduce the loads on watercourses, and especially the diffuse emissions. The natural and unique properties of peat can be utilized in several targets: agriculture, pisciculture, fur farming, in small and medium sized industry, and in processing of waste waters of both municipalities and rural areas, as well as in different environmental hazards. The present use of environmental peat is just a small fragment of the annual growth of peat reserves in Finland. The amount of protected mires is about ten times larger than the amount of peatlands taken into peat production. The use of environmental peat makes it possible to reduce the diffuse loads significantly in the future. This, however, requires willingness of cooperation and development by the entrepreneurs, authorities, and peat producers. The present use of agricultural peat binds about three times more phosphor and nearly one and a half fold nitrogen fertilizers compare to the emissions caused by peat production. It has to be noticed that the utilization of peat in reduction of environmental loads does not cause any secondary waste problem. The final product formed can usually be composted and used e.g. in soil remediation or in construction of green areas. The tightening environmental regulations and international agreements increase the utilization of peat. As the demand of peat increased the quality requirements for peat will be increased. Certain grain size and the restoration of the

  9. Environmental performance management

    International Nuclear Information System (INIS)

    Kwant, J.W.H.; Grant, R.O.H.

    1991-01-01

    This paper describes the environmental programme developed by Shell U.K. Exploration and Production (EXPRO) aiming at a continuous improvement of its environmental performance. The company operates a total of 33 platforms in the North Sea and has 3 land based gas treatment plants. This paper, therefore, relates mainly to the offshore environment. The programme is driven by adopting a goal setting policy. The plan was initiated mid 1990 when an inventory was made of all gaseous emissions, liquid effluents and solid waste discharges of EXPRO's operations during 1989. This baseline was used to identify the largest waste steams and to set priorities for the subsequent improvement programme. Areas for improvement are: atmospheric emissions from venting, flaring and the use of Freons and Halons, the use of Oil Based Mud (OBM), produced water and the disposal of industrial waste. The programme has gained momentum and targets have been set

  10. A concept of environmental controlling for industrial enterprises

    International Nuclear Information System (INIS)

    Poelzl, U.

    1992-01-01

    The protection of nature is seen as a global challenge to mankind. Industrial enterprises are confronted with the question of how to contribute to the solution of environmental problems. In this study possibilities and concepts are printed out that would enable industrial enterprises to recognize and as a consequence reduce environmental pollution and risks caused by their products and production processes by means of organization. After a description of recent developments in the entrepreneur's surroundings brought about by environmental problems, and a characterization of environmental management, which can be seen as a reaction to the above mentioned developments, a concept of environmental controlling for industrial enterprises is developed deductively. Environmental controlling is here regarded as a sub-system of environmental management that supports the determination of environmental aims, the analysis, the planning and the control of environmental pollution, as well as the use of material and energy by installing and coordinating a specific environment information system. The main functions of environmental controlling are planning, controlling, informing, advising and some special functions. The specific functional instruments for carrying out these tasks are described in a special chapter. (author)

  11. An essay on: management of industrial waste, an engineer's viewpoint

    International Nuclear Information System (INIS)

    Raphael, M.A.

    1995-01-01

    Industrial waste and industrial waste management are described, with economic considerations and recommendations for an industrial waste management program applicable in Lebanon. Different conceptual systems for industrial waste management are presented: - The O effluent industrial plant, an electric manufacturing plant with mass and energy balance. - The industrial complexing concept where environmentally balanced and compatible, industries are located in one area. Waste effluents from one plant can be used as raw material for another plant. - A standard petroleum waste recovery plant to cope with local requirements complementary to the proposed sanitary waste treatment plant in Lebanon. Major sources of industrial waste in Lebanon are analyzed:local process industries, hospitals, laboratories, petroleum industries and power generation, are the major sources cited. For each source the level of treatment is indicated. Tables and appendixes on waste treatment and management along with the ISO 9000 series are presented. 10 refs. 3 figs

  12. Environmental management activities

    International Nuclear Information System (INIS)

    1997-01-01

    The Office of Environmental Management (EM) has been delegated the responsibility for the Department of Energy's (DOE's) cleanup of the nuclear weapons complex. The nature and magnitude of the waste management and environmental remediation problem requires the identification of technologies and scientific expertise from domestic and foreign sources. Within the United States, operational DOE facilities, as well as the decontamination and decommissioning of inactive facilities, have produced significant amounts of radioactive, hazardous, and mixed wastes. In order to ensure worker safety and the protection of the public, DOE must: (1) assess, remediate, and monitor sites and facilities; (2) store, treat, and dispose of wastes from past and current operations; and (3) develop and implement innovative technologies for environmental restoration and waste management. The EM directive necessitates looking beyond domestic capabilities to technological solutions found outside US borders. Following the collapse of the Soviet regime, formerly restricted elite Soviet scientific expertise became available to the West. EM has established a cooperative technology development program with Russian scientific institutes that meets domestic cleanup objectives by: (1) identifying and accessing Russian EM-related technologies, thereby leveraging investments and providing cost-savings; (2) improving access to technical information, scientific expertise, and technologies applicable to EM needs; and (3) increasing US private sector opportunities in Russian in EM-related areas

  13. Environmental challenges for the Egg Processing Industry

    DEFF Research Database (Denmark)

    Mortensen, Bent Ole Gram; Hald, Mie

    industries having a large consumption of natural resources (water and energy) and produces significantly amounts of residue (waste water, carbon dioxide and biodegradable waste). As such it is only natural that the food industry is governed by environmental regulation. In this book the Egg...

  14. Corrosion management in nuclear industry

    International Nuclear Information System (INIS)

    Kamachi Mudali, U.

    2012-01-01

    Corrosion is a major degradation mechanism of metals and alloys which significantly affects the global economy with an average loss of 3.5% of GDP of several countries in many important industrial sectors including chemical, petrochemical, power, oil, refinery, fertilizer etc. The demand for higher efficiency and achieving name plate capacity, in addition to ever increasing temperatures, pressures and complexities in equipment geometry of industrial processes, necessitate utmost care in adopting appropriate corrosion management strategies in selecting, designing, fabricating and utilising various materials and coatings for engineering applications in industries. Corrosion control and prevention is an important focus area as the savings achieved from practicing corrosion control and prevention would bring significant benefits to the industry. Towards this, advanced corrosion management strategies starting from design, manufacturing, operation, maintenance, in-service inspection and online monitoring are essential. At the Indira Gandhi Centre for Atomic Research (IGCAR) strategic corrosion management efforts have been pursued in order to provide solutions to practical problems emerging in the plants, in addition to innovative efforts to provide insight into mechanism and understanding of corrosion of various engineering materials and coatings. In this presentation the author highlights how the nuclear industry benefited from the practical approach to successful corrosion management, particularly with respect to fast breeder reactor programme involving both reactor and associated reprocessing plants. (author)

  15. Gas industry and environmental reports: the SNAM case

    International Nuclear Information System (INIS)

    Riva, A.; Andreetto, B.; Trebeschi, C.

    1996-01-01

    The so-called 'Environmental Report' is a document containing data and information on the environmental impact of a company; it is being voluntary adopted by a growing number of companies as a tool for environmental management and as a transparent communication protocol between companies and customers. Methodologies and contents of environmental reports are shown, as well as the relevant advantages for companies. Although its activities have a low environmental impact, the gas industry is engaged in further reducing such an impact, by taking voluntary actions such as the adoption of codes of practice and the issue of environmental reports. The contents of SNAM's 1995 Environmental Report are presented, along with the activities carried out, the environmental data and the initiatives adopted for environmental protection

  16. Solid waste management in Khartoum industrial area

    International Nuclear Information System (INIS)

    Elsidig, N. O. A.

    2004-05-01

    This study was conducted in Khartoum industrial area (KIA). The study discusses solid waste generation issues in KIA as well as solid waste collection, storage, transport and final disposal methods. A focus on environmental impact resulting from the accumulation of solid waste was presented by reviewing solid waste management in developed as well as developing countries starting from generation to final disposal. Environmental health legislation in Sudan was investigated. The study covers all the (eight) industrial sub-sectors presented in KIA. The main objective of the study is to assess the situation of solid waste in KIA. To fulfill the objectives of the study the researcher deemed it necessary to explore problems related to solid waste generation and solid waste arrangement with special emphasis on final disposal methods. Practically, 31 (thirty-one) factories representing the different industrial sub-sectors in KIA were studied. This represents 25% of the total number of factories located in KIA. Data were obtained by, questionnaires, interviews and observations mainly directed to concerned officials, solid waste workers, pickers and brokers. Obtained data were stored, coded, tabulated and analyzed using the computer systems (excel and SPSS programmes). The obtained results should clear deficiency in the management of solid waste which led to great environmental deterioration in KIA and neighboring residential areas. The environment in studied area is continuously polluted due to high pollution loads and unproved solid waste management. In order to maintain health environment operating factories have to pretreated their solid waste according to the recognized standards and waste minimization techniques such as recycling and re use should be widely applied, moreover, running crash programme for environmental sanitation in Khartoum state should be expanded and improved to include special characteristics of solid waste from industries. Finally, increase awareness

  17. Environmental issues facing the oil industry

    International Nuclear Information System (INIS)

    Skea, Jim

    1992-01-01

    Environmental policies and regulations are having profound effects on the oil industry. The industry is affected by controls on both its production and processing activities and on the use of its own products. The environmental impacts of upstream activities, epitomized by the Exxon Valdez accident, are leading to more expensive tanker designs. Oil markets can be changed by sulphur controls driven by concern about acid rain and new requirements in the USA to change gasoline specifications in order to reduce urban smog. The problem of climate change and CO 2 emissions poses even more fundamental challenges to the oil industry, with the prospect of reduced markets in the longer term. (author)

  18. Environmental biotechnologies for the fossil fuel industry

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D W; Donald, G M [Hycal Energy Research Labs. Ltd., Calgary, AB (Canada)

    1997-09-01

    Five recent technologies that have been proven to be viable means to mitigate the environmental impact of the fossil fuel industry were described as evidence of the industry`s concern about environmental pollution. The technologies were: bioventing, bioslurping, biofiltration, phytoremediation and the use of genetically engineered organisms. Special attention was paid to genetic modification strategies with reference to improved degradation rates and the regulations in Canada affecting genetically engineered organisms and their use. Case histories were cited to illustrate application of the various processes. 34 refs.

  19. Assessment of logistic outlays in industrial solid waste management

    Directory of Open Access Journals (Sweden)

    Janusz Grabara

    2014-12-01

    Full Text Available Out of concern for environmental protection is an increasingly common practice. Companies thus have an additional task which is the correct organization of the industrial waste management. This is achieved through the use of logistics processes in industrial waste management, mainly such as warehousing, transport, storage and recovery. These processes involve the formation of logistics costs resulting from waste management. The paper presents a mathematical model for cost of logistics management of industrial waste resulting from the above-mentioned processes. It also shows the interpretation of these costs and the relations between them. The model can increase costefficiency in companies managing industrial waste, while increasing attention to the environment.

  20. Determining the sustainability of ceramic and glass industry using environmental management tools; Determinacion de la sostenibilidad de la industria mineral de la ceramica y del vidrio mediante herramientas de gestion ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Espi Rodriguez, J. A.

    2011-07-01

    In the last few years we have seen the creation of an everyday larger and varied series of are creating large and varied series of environmental management tools used to analyze and classify environmentally each mineral and its physical, economic and environmental circumstances. Thus we now, count with the Material Flow Analysis (MFA) of a mining operation, the Life Cycle Analysis (LCA), Energy and Exergy Analysis, Cost Benefit Environmental Analysis, Carbon Footprints, the Best Available Technology (BTA) and many others able to analyze and classify ore deposit site types, availability of resources, environmental impact conditions, transparency in communication and almost all crucial aspects related with the environmental geometry of the mining production process. This paper focuses on the application of some management tools that best fit to the minerals used in the ceramic and glass industry. (Author) 12 refs.

  1. Environmental management in the Dutch food and beverage industry : a longitudinal study into the joint impact of business network and firm characteristics on the adoption of environmental management capabilities

    NARCIS (Netherlands)

    Haverkamp, D.J.

    2007-01-01

    The present study aims for a deeper understanding of the internal and external factors, such as firm strategy and pressure from the business network (government, buyers, suppliers, local inhabitants, etc.), that have an impact on the adoption of environmental management capabilities in firms in the

  2. Environmental problems facing the electricity industry

    International Nuclear Information System (INIS)

    Johnson, S.

    1988-01-01

    The paper on the environmental problems facing the electricity industry was first presented at the World Electricity Conference, Nov. 1987. According to the author, the biggest immediate environmental challenge the electricity industry faces is the need for the role and importance of nuclear power to be reasserted clearly and unambiguously. The main environmental problems from electricity generation are air pollution and the carbon dioxide/greenhouse issue, and the author thinks that both could be reduced by an increased use of nuclear power as an energy source. (U.K.)

  3. Environmental management in the National Power Corporation

    International Nuclear Information System (INIS)

    Petel, M.R.L.

    1996-01-01

    Environmental management in the National Power Corporation (NPC) is enshrined in the corporate charter. Environmental management practice can be traced back to the past purely hydroelectric power generation days, of the corporation. One good thing about nuclear power plant project of NPC, is that it required a formalization and documentation of environmental management, as part of the licensing procedure for the project. Thereafter, environmental management had been strengthened and institutionalized in the corporation. Succeeding years had also witnessed the escalation of the development and diversification of electricity generation sources, including the development of geothermal power, and to a small extent yet, renewable energy, such as wind power. The corporation has also intensified the installation of transmission lines of varying sizes in various locations and has gone, for now, for its internal needs, into telecommunications. With the anticipated further developments in the power sector, i.e., the ever increasing demand for power and the privitization of the power industry, new challenges loom in environmental management for the sector. The parallel developments in the environmental sciences and the collective experiences in power generation and environmental management, locally and abroad, will be very handy in meeting the challenges. The increasing stringency of environmental regulations and standards are also providing continuing challenges to all power utilities like NPC. Globally, the power scenario points towards challenging environmental management requirements, in view of the increasing complexity and gravity of environmental problems facing nations. NPC will still be a player in this scenario and therefore, will need to respond accordingly. (author)

  4. Risk management for industrial safety

    International Nuclear Information System (INIS)

    Novogno, A.

    1989-01-01

    The catastrophic accidents which have occurred in the last decade, in both developed and developing countries, have drawn the attention of decision-makers in the safety area to the urgent necessity to assess and manage risks from hazardous industrial activities which are concentrated in large industrialized areas. The aim of this paper is to review experience gained in conducting studies in the area of 'comparisons of risks in energy systems' and on the practical application of 'cost effectiveness of risk reduction analysis among different energy systems' (case studies). It is also the aim of the paper to discuss and propose a general framework for defining an 'integrated approach' to risk assessment and management in highly industrialized regions within a country. (author)

  5. Industrial environmental practices in Polish Firms

    DEFF Research Database (Denmark)

    Kræmer, Trine Pipi

    , and environment. The five case firms all had a Communist past. The firms represent three different industrial sectors; i.e. textile, energy, and publishing and printing industries. Furthermore, the firms are both private and state owned as well as in the process of privatisation.......The study investigates how discursive developments in Poland interact with industrial environmental practices in five production firms. The analysis of the discursive development covers the period from the end of World War I to the turn of the century. The areas in focus are identity, industry...

  6. Environmental management report 2011

    International Nuclear Information System (INIS)

    Braathen, Ole-Anders

    2012-01-01

    One of NILU's main goals is to study the impact of pollution. It is thus very important for the institute to have control of the impact the institute's own activities may have on the environment and to reduce the impact as far as possible. NILU has for many years been working to reduce the impact. In order to take this one step further, it was decided that the institute should restructure the work according to a relevant environmental standard and to seek certification according to the same standard. The chosen standard is ISO 14001:2004 (Environmental management systems: Requirements with guidance for use) and NILU achieved certification according to this standard in October 2010.(Author)

  7. Environmental management report 2011

    Energy Technology Data Exchange (ETDEWEB)

    Braathen, Ole-Anders

    2012-07-01

    One of NILU's main goals is to study the impact of pollution. It is thus very important for the institute to have control of the impact the institute's own activities may have on the environment and to reduce the impact as far as possible. NILU has for many years been working to reduce the impact. In order to take this one step further, it was decided that the institute should restructure the work according to a relevant environmental standard and to seek certification according to the same standard. The chosen standard is ISO 14001:2004 (Environmental management systems: Requirements with guidance for use) and NILU achieved certification according to this standard in October 2010.(Author)

  8. Environmental management report 2010

    International Nuclear Information System (INIS)

    Braathen, Ole-Anders

    2011-01-01

    One of NILU's main goals is to study the impact of pollution. It is thus very important for the institute to have control of the impact the institute's own activities may have on the environment and to reduce the impact as far as possible. NILU has for many years been working to reduce the impact. In order to take this one step further, it was decided that the institute should restructure the work according to a relevant environmental standard and to seek certification according to the same standard. The chosen standard is ISO 14001:2004 (Environmental management systems: Requirements with guidance for use) and NILU achieved certification according to this standard in October 2010.(Author)

  9. Environmental management report 2010

    Energy Technology Data Exchange (ETDEWEB)

    Braathen, Ole-Anders

    2011-07-01

    One of NILU's main goals is to study the impact of pollution. It is thus very important for the institute to have control of the impact the institute's own activities may have on the environment and to reduce the impact as far as possible. NILU has for many years been working to reduce the impact. In order to take this one step further, it was decided that the institute should restructure the work according to a relevant environmental standard and to seek certification according to the same standard. The chosen standard is ISO 14001:2004 (Environmental management systems: Requirements with guidance for use) and NILU achieved certification according to this standard in October 2010.(Author)

  10. Auxiliaries for the textile industry and environmental protection

    Directory of Open Access Journals (Sweden)

    Sanda VISAN

    2010-06-01

    Full Text Available The textile industry is an industrial field that affects the environment, from the plant growth until the production process. The obtaining of environmental licence for Romanian companies that produce textile products is related to elaboration and implementation of a modern system for an environmental management, that consist in utilization of ecological technologies for finishing, in diminution the water and energy consumption, cleaning of waste waters, reutilization of cleaned waters, sustainable management of wastes. In this study, the surfactant categories used in the textile industry that fulfil the conditions of environment protection, are presented. Some exemplifications were made involving the existing surfactants in Romanian textile industry, obtained from both domestic and external production. Also, some recommendation are suggested regarding the utilization of surfactants manufactured from either vegetal oils or chemical/petrochemical wastes, with similar properties as those from import having decreased prices an that affect as small as possible the environment.

  11. Environmental indicators for solid waste management of oil industry; Indicadores ambientais para a gestao de residuos solidos oleosos da industria de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Mara R.F.V. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Holanda, Francisco S.R. [Universidade Federal de Sergipe (UFS), Aracaju, SE (Brazil)

    2004-07-01

    The Chapter 40 of the Agenda 21 guides for the use of indicators as effective instruments to synthesize and to transmit information in a significant way, inside of the making decision process. The environmental indicators aid in the analysis of the environmental quality, which depends on the pressure exercised in the environment and they possess the communication function and administration function. To facilitate the communication, the indicators should be in reduced number and of easy understanding. To facilitate the administration, the indicators should be aligned with the political questions. This work defined 15 environmental indicators for the System of environmental administration of oil waste of the oil industry as instruments to organize, to systematize, to quantify, to simplify and to communicate relative information to several environmental aspects, using the model Pressure-state-impact-answer proposed by PNUMA-CIAT (1996) added of prospective indicators, making possible to determine the type and the nature of the socio-environmental relationships. (author)

  12. Industrial energy-flow management

    International Nuclear Information System (INIS)

    Lampret, Marko; Bukovec, Venceslav; Paternost, Andrej; Krizman, Srecko; Lojk, Vito; Golobic, Iztok

    2007-01-01

    Deregulation of the energy market has created new opportunities for the development of new energy-management methods based on energy assets, risk management, energy efficiency and sustainable development. Industrial energy-flow management in pharmaceutical systems, with a responsible approach to sustainable development, is a complex task. For this reason, an energy-information centre, with over 14,000 online measured data/nodes, was implemented. This paper presents the energy-flow rate, exergy-flow rate and cost-flow rate diagrams, with emphasis on cost-flow rate per energy unit or exergy unit of complex pharmaceutical systems

  13. Environmental remote sensing for the petroleum industry

    International Nuclear Information System (INIS)

    Baker, R.N.

    1991-01-01

    Remote sensing techniques developed for exploration programs can often be used to address environmental issues facing the petroleum industry. While this industry becomes increasingly more environmentally conscious, budgets remain tight, requiring any technology used in environmental applications to be cost effective, widely available and reliable. In this paper a three-fold analysis of environmental issues facing the petroleum industry concludes: major areas of concern included environmental mapping natural habitats, surface cover, change through time, pollution monitoring (hazardous wastes, oil seeps and spills on and offshore), earth hazards assessment, baseline studies, facilities sitting and crisis response. options matrices were developed plotting current and near future RS technology vs environmental concerns, and each sensor/platform combination subjectively evaluated to determine which combination could best address the problem. While presently available RS technology (both airborne and spaceborne) has significant capability toward environmental mapping, hazards detection and other concerns, the anticipated launches of ERS-1, JERS-1, Landsat-6 and other systems will provide environmentally useful data available today only from relatively expensive and local airborne surveys. Low altitude airborne surveys and ground/sea truth will continue to be critical to any quantitative studies

  14. ENVIRONMENTAL MANAGEMENT SYSTEMS CERTIFICATION

    Directory of Open Access Journals (Sweden)

    Aniko Miler-Virc

    2012-12-01

    Full Text Available ISO 14001 prescribes the requirements for a system, not environmental performance itself. Similarly, certification is of the management system itself, not environmental performance. An audit is not conducted to ascertain whether your flue gas emissions are less than X part per million nitrous oxide or that your wastewater effluent contains less that Y milligrams of bacteria per litre. Consequently, the procces of auditing the system for compliance to the standard entails checking to see that all of the necessary components of a functioning system are present and working properly.           A company can have a complete and fully functional EMS as prescribed by ISO 14001 without being certified. As certification can add to the time and expense of EMS development, it is important for you to establish, in advance, whether certification is of net benefit to you. Although most companies that develop an EMS do in fact certify, there are cases where certification does not add immediate value. Certification is not always beneficial to small and medium sized companies. Certification is not always necessary for companies with one or two large clients with environmental demands who are satisfied that you have a functional EMS (second-party declaration. Whatever decision you make, it is important to remember that just as a driver′s licence does not automatically make you a good driver, ISO 14001 certification does not automatically make your company environmentally benign or ensure that you will continually improve environmental performance. The system is only as good as the people who operate it.

  15. Managing Complex Environmental Risks

    Energy Technology Data Exchange (ETDEWEB)

    Karlsson, Mikael [Karlstad Univ. (Sweden). Dept. of Environmental Sciences

    2006-09-15

    Environmental and public health risks are often handled in a process in which experts, and sometimes policy makers, try their best to quantitatively assess, evaluate and manage risks. This approach harmonises with mainstream interpretations of sustainable development, which aim at defining a desirable relationship between human and natural systems, for instance by policies that define limit values of different forms of disturbances. However, under conditions of high scientific incertitude, diverging values and distrust, this approach is far from satisfactory. The use of cell phones, hazardous chemicals, nuclear or fossil energy systems, and modern biotechnology are examples of activities causing such risks with high complexity. Against this background, a complementary interpretation of the concept of sustainable development is suggested. This interpretation is operationalised through new formulations of three common principles for public risk management; the precautionary principle, the polluter pays principle and the principle of public participation. Implementation of these reformulated principles would challenge some foundations of present mainstream views on environmental decision-making, but would on the other hand contribute to improved practices for long-term human welfare and planetary survival (full text of contribution)

  16. Managing Complex Environmental Risks

    International Nuclear Information System (INIS)

    Karlsson, Mikael

    2006-01-01

    Environmental and public health risks are often handled in a process in which experts, and sometimes policy makers, try their best to quantitatively assess, evaluate and manage risks. This approach harmonises with mainstream interpretations of sustainable development, which aim at defining a desirable relationship between human and natural systems, for instance by policies that define limit values of different forms of disturbances. However, under conditions of high scientific incertitude, diverging values and distrust, this approach is far from satisfactory. The use of cell phones, hazardous chemicals, nuclear or fossil energy systems, and modern biotechnology are examples of activities causing such risks with high complexity. Against this background, a complementary interpretation of the concept of sustainable development is suggested. This interpretation is operationalised through new formulations of three common principles for public risk management; the precautionary principle, the polluter pays principle and the principle of public participation. Implementation of these reformulated principles would challenge some foundations of present mainstream views on environmental decision-making, but would on the other hand contribute to improved practices for long-term human welfare and planetary survival (full text of contribution)

  17. Environmental Indicators in the Newspaper Industry

    Directory of Open Access Journals (Sweden)

    Maria Enroth

    2003-12-01

    Full Text Available Environmental indicators promote the eco-efficient development of companies, as demonstrated in earlier study. This study builds on a previously developed model and inventory tools for industryspecific environmental indicators for the graphic arts industry. This study is based on case studies from 14 newspaper companies with experience of the use of these industry-specific environmental indicators in actual production.This paper presents data on industry-specific environmental indicators for the newspaper industry. The data describes the average situation and the range of values for the indicators in 14 environmentally aware newspaper companies in Sweden in 2001. The data is also grouped so as to illustrate average values for various classes:Newspaper companies with printing facilities.Newspaper companies with no printing facilities.Newspaper printing companies.In addition, a preliminary comparison has been carried out using equivalent data for the commercial printing industry.The indicators calculated for each specific company, together with average values for these indicators, have been used to identify areas for action for the various companies and to formulate action plans. The aim of this is to promote more eco-efficient activities. The study also summarizes measures already implemented at the various companies.The use of indicators within these companies has been linked with the current and predicted future eed to communicate environmental issues. Financial and social aspects have been considered to a limited extent in the study in order to put forward the concept of sustainable development in the newspaper industry in Sweden.

  18. Environmental biotechnologies for the fossil fuel industry

    International Nuclear Information System (INIS)

    Lee, D. W.; Donald, G. M.

    1997-01-01

    Five recent technologies that have been proven to be viable means to mitigate the environmental impact of the fossil fuel industry were described as evidence of the industry's concern about environmental pollution. The technologies were: bioventing, bioslurping, biofiltration, phytoremediation and the use of genetically engineered organisms. Special attention was paid to genetic modification strategies with reference to improved degradation rates and the regulations in Canada affecting genetically engineered organisms and their use. Case histories were cited to illustrate application of the various processes. 34 refs

  19. Environmental management in public hospitals: Environmental management in Colombia

    Directory of Open Access Journals (Sweden)

    Juan Pablo Rodríguez-Miranda

    2016-10-01

    Conclusions: Hospitals can apply broader environmental management instruments, including life cycle analysis of their products and services and monitoring of the carbon footprint; they may also take into account the different areas of environmental impact of their operation.

  20. Academia-Industry Nexus Management

    Directory of Open Access Journals (Sweden)

    Sergej Gricar

    2016-12-01

    Full Text Available The aim of this study is to discuss the importance of co-operation and separation between academia and industry. The academiaindustry partnership is a feasible factor that affects innovations with students’ transition to the job market. The empirical material was collected and analysed on the basis of data gathered by Slovene Human Resources Development and Scholarship Fund. The data applies to several academic-industry network projects founded by the aforementioned organisation. The case study of the survey outlines four project cases conducted by Faculty of Business, Management and Informatics. The results reveal exercises to exchange expertise and experience, helping the industry to become more competitive whilst offering students better employability and career prospects.

  1. Environmental Management Performance Report

    International Nuclear Information System (INIS)

    EDER, D.M.

    2002-01-01

    The purpose of this report is to provide the Department of Energy Richland Operations Office (RL) a monthly summary of the Central Plateau Contractor's Environmental Management (EM) performance by Fluor Hanford (FH) and its subcontractors. Only current FH workscope responsibilities are described and other contractor/RL managed work is excluded. Please refer to other sections (BHI, PNNL) for other contractor information. Section A, Executive Summary, provides an executive level summary of the cost, schedule, and technical performance described in this report. It summarizes performance for the period covered, highlights areas worthy of management attention, and provides a forward look to some of the upcoming key performance activities as extracted from the contractor baseline. The remaining sections provide detailed performance data relative to each individual subproject (e.g., Plutonium Finishing Plant, Spent Nuclear Fuels, etc.), in support of Section A of the report. All information is updated as of January 31, 2002 unless otherwise noted. ''Stoplight'' boxes are used to indicate at a glance the condition of a particular safety area. Green boxes denote either (1) the data are stable at a level representing ''acceptable'' performance, or (2) an improving trend exists. Yellows denote the data are stable at a level from which improvement is needed. Red denotes a trend exists in a non-improving direction

  2. Environmental Management Performance Report

    International Nuclear Information System (INIS)

    EDER, D.M.

    2002-01-01

    The purpose of this report is to provide the Department of Energy Richland Operations Office (RL) a monthly summary of the Central Plateau Contractor's Environmental Management (EM) performance by Fluor Hanford (FH) and its subcontractors. Only current FH workscope responsibilities are described and other contractor/RL managed work is excluded. Please refer to other sections (BHI, PNNL) for other contractor information. Section A, Executive Summary, provides an executive level summary of the cost, schedule, and technical performance described in this report. It summarizes performance for the period covered, highlights areas worthy of management attention, and provides a forward look to some of the upcoming key performance activities as extracted from the contractor baseline. The remaining sections provide detailed performance data relative to each individual subproject (e.g., Plutonium Finishing Plant, Spent Nuclear Fuels, etc.), in support of Section A of the report. All information is updated as of the end of May 2002 unless otherwise noted. ''Stoplight'' boxes are used to indicate at a glance the condition of a particular safety area. Green boxes denote either (1) the data are stable at a level representing ''acceptable'' performance, or (2) an improving trend exists. Yellows denote the data are stable at a level from which improvement is needed. Red denotes a trend exists in a non-improving direction

  3. Comfort monitoring? Environmental assessment follow-up under community-industry negotiated environmental agreements

    International Nuclear Information System (INIS)

    Noble, Bram; Birk, Jasmine

    2011-01-01

    Negotiated environmental agreements are becoming common practice in the mining industry. In principle, negotiated environmental agreements are said to respond to many of the shortcomings of environmental impact assessment by providing for improved follow-up of project impacts through, among other things, data provision, engaging stakeholders in the monitoring and management of project impacts, and building capacity at the local level to deal with project-induced environmental change. In practice, however, little is known about the efficacy of follow-up under negotiated environmental agreements between proponents and communities and the demonstrated value added to project impact management. This paper examines follow-up practice under negotiated environmental agreements with a view to understanding whether and how community-based monitoring under privatized agreements actually contributes to improved follow-up and impact management. Based on lessons emerging from recent experiences with environmental agreements in Canada's uranium industry, we show that follow-up under negotiated agreements may be described as 'comfort monitoring'. While such monitoring does improve community-industry relations and enhance corporate image, it does little to support effects-based management. If follow-up under negotiated agreements is to be credible over the long term, there is a need to ensure that monitoring results are useful for, and integrated with, regulatory-based monitoring and project impact management practices.

  4. TRANSPORTATION INDUSTRY EFFECTIVE MANAGEMENT CONDITIONS

    Directory of Open Access Journals (Sweden)

    V. I. Kuznetsov

    2011-01-01

    Full Text Available Main aspects that determine conditions of transportation industry effective management and decrease of transportation expenses are discussed. Theoretical concepts making it possible to solve the problem of scientific management of the whole country’s goods transportation costs are provided for. Main approaches are presented to the solution of motor transport operation ecological optimization problem as well as to the rise of motor transport workers’ labor productivity, to the increase of transportation vehicles use efficiency and to determine functional capacity of the motor transport complex.

  5. Study of whole effluent acute toxicity test (Daphnia magna as an evaluation of Ministry of Environment and Forestry Decree No. 3 In 2014 concerning industrial performance rank in environmental management

    Directory of Open Access Journals (Sweden)

    Rohmah Neng

    2018-01-01

    Full Text Available Only 15% of the industries in Citarum Watershed, specifically in Bandung Regency, West Bandung Regency, Sumedang Regency, Bandung City and Cimahi City, are registered as PROPER industries. They must comply to indicators as set in the Minister of Environment and Forestry Decree No. 3 In 2014 concerning Industrial Performance Rank in Environmental Management, as a requirement to apply for PROPER. Wastewater treatment and management, referencing to Minister of Environment and Forestry Decree No. 5 In 2014 concerning Wastewater Effluent Standards, must be performed to be registered as PROPER industries. Conducting only physical-chemical parameter monitoring of wastewater is insufficient to determine the safety of wastewater discharged into the river, therefore additional toxicity tests involving bioindicator are required to determine acute toxicity characteristic of wastewater. The acute toxicity test quantifies LC50 value based on death response of bioindicators from certain dosage. Daphnia magna was used as bioindicator in the toxicity test and probit software for analysis. In 2015-2016, the number of industries that discharged wastewater exceeding the standard was found greater in non-PROPER industries than in PROPER industries. Based on the toxicity level, both PROPER and non-PROPER industries have toxic properties, however PROPER industries of 2015-2016 is more toxic with LC5096 value reaching 2.79%.

  6. Environmental Management vitrification activities

    Energy Technology Data Exchange (ETDEWEB)

    Krumrine, P.H. [Waste Policy Institute, Gaithersburg, MD (United States)

    1996-05-01

    Both the Mixed Waste and Landfill Stabilization Focus Areas as part of the Office of Technology Development efforts within the Department of Energy`s (DOE) Environmental Management (EM) Division have been developing various vitrification technologies as a treatment approach for the large quantities of transuranic (TRU), TRU mixed and Mixed Low Level Wastes that are stored in either landfills or above ground storage facilities. The technologies being developed include joule heated, plasma torch, plasma arc, induction, microwave, combustion, molten metal, and in situ methods. There are related efforts going into development glass, ceramic, and slag waste form windows of opportunity for the diverse quantities of heterogeneous wastes needing treatment. These studies look at both processing parameters, and long term performance parameters as a function of composition to assure that developed technologies have the right chemistry for success.

  7. Environmental Management vitrification activities

    International Nuclear Information System (INIS)

    Krumrine, P.H.

    1996-01-01

    Both the Mixed Waste and Landfill Stabilization Focus Areas as part of the Office of Technology Development efforts within the Department of Energy's (DOE) Environmental Management (EM) Division have been developing various vitrification technologies as a treatment approach for the large quantities of transuranic (TRU), TRU mixed and Mixed Low Level Wastes that are stored in either landfills or above ground storage facilities. The technologies being developed include joule heated, plasma torch, plasma arc, induction, microwave, combustion, molten metal, and in situ methods. There are related efforts going into development glass, ceramic, and slag waste form windows of opportunity for the diverse quantities of heterogeneous wastes needing treatment. These studies look at both processing parameters, and long term performance parameters as a function of composition to assure that developed technologies have the right chemistry for success

  8. ENVIRONMENTAL REGULATIONS AND TECHNOLOGY - THE ELECTROPLATING INDUSTRY

    Science.gov (United States)

    This 44-page Technology Transfer Environmental Regulations and Technology publication is an update of a 1980 EPA publication that has been revised to reflect changes in the EPA regulations, as well as in the pollution control technologies that affect the electroplating industry. ...

  9. Environmental problems in Russian coal industry

    International Nuclear Information System (INIS)

    Kharchenko, V.; Oumnov, V.

    1996-01-01

    The state of the Russian coal industry is complicated both economically and environmentally. Most mines are unprofitable. Several coal mines are intended to be closed. So, under existing conditions, coal mines are unable to give much attention to environmental protection problems. At the same time, coal mining is one of the most polluting industries. The main trends in this industry's negative influence upon the environment are: land spoilage and immobilization to lay out open-pit mines and mineral waste dump areas and tailing piles as well as with industrial waste water runoff; atmospheric pollution with the air coming from underground and substances blown off from dumps, hydrogeological regime intervention in coal mining areas, etc. One way to solve environmental problems in coal mining is a more rational utilization of the accompanying natural coal resources. Such measures make it possible to obtain complementary profits not only at the expense of reducing environmental destruction but producing new kinds of goods or services as well. Examples of similar solutions are solid mineral wastes utilization, underground space utilization, coal gas utilization and other issues

  10. Environmental Innovation Dynamics in the Automotive industry

    NARCIS (Netherlands)

    Kuik, O

    2006-01-01

    This paper addresses the innovation dynamics induced by environmental policy in the automotive industry. It examines car fuel efficiency programs in the EU, the US and Japan. It concludes that existing programs have not yet succeeded in promoting radical and breakthrough technologies, but that, at

  11. Are EMS environmentally effective? The link between environmental management systems and environmental performance in European companies

    NARCIS (Netherlands)

    Hertin, J.; Berkhout, F.G.H.; Wagner, M.; Tyteca, D.

    2008-01-01

    Based on the analysis of a large dataset on the environmental performance of European companies in five industrial sectors, this paper examines the question of whether the presence of an environmental management system (EMS) has a positive impact on the eco-efficiency of companies. It begins with a

  12. Japanese experiences of environmental management

    Energy Technology Data Exchange (ETDEWEB)

    Matsuo, T. [Toyo University, Itakura (Japan)

    2003-07-01

    Japan experienced a very rapid industrialization and economic growth in the era of income doubling in 1960s and at the same time it experienced very severe damage from various types of environmental pollution. In this paper, historical development of population, GNP, energy consumption with classification of petroleum, coal and electric power, and CO{sub 2} emission are introduced as basic background data on Japanese development. The tragic experience of Minamata disease and Itai-itai disease caused by methyl mercury and cadmium, respectively, are introduced. In two tables, historical development of water pollution and air pollution are summarized. Regarding solid wastes management, the total mass balance in Japan and recent development in legislation framework for enhancement of recycling of wastes are introduced briefly.

  13. Ethiopian Journal of Environmental Studies & Management 7(3 ...

    African Journals Online (AJOL)

    Osondu

    2014-04-10

    Apr 10, 2014 ... Department of Geography and Environmental Management, ... most common weather hazards which are detrimental to the aviation industry so as to ... safety management system. ..... The effective monitoring and control of fog.

  14. Kicking in: environmental commandments become cornerstones of an industry

    International Nuclear Information System (INIS)

    Black, L.

    1999-01-01

    The issue of waste management in the oil industry is an all-pervasive one since all facets of industry activity -drilling, production and even reclamation- generate oil field waste. The materials include produced sand from wells, process sludge, tank bottoms, oil spill cleanup material, and drilling and completion fluids. Wastes typically contain mixtures of oil, water and solids, commonly referred to in the industry as 'slop'. Getting rid of this waste has become big business since the mid-1980s, regulated by AEUB Guide 58, 'Oilfield Waste Management Requirements for the Upstream Petroleum Industry', which covers responsibilities of waste generators and receivers, license requirements, classification of materials as a dangerous oilfield waste (DOW) or non-DOW, tracking of waste and enforcement guidelines. This paper describes the waste treatment and disposal processes used by Canadian Crude Separators Inc. in Calgary as typical of companies that are involved in the burgeoning business of oilfield waste management. It also describes some of the more innovative aspects of the business such as recycling and reuse in cement and asphalt production and roadbed construction. The objective of AEUB's waste operations section and those involved in the waste treatment industry is to keep abreast of technology improvements and to improve waste management practices to become more environmentally responsible and friendly, and to minimize waste by reusing it to create environmentally friendly products

  15. Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

    Directory of Open Access Journals (Sweden)

    Larissa A. R. U. Freitas

    2017-07-01

    Full Text Available The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ecology contributions to waste management in industrial construction. The waste management strategies adopted in two industrial construction projects in Brazil are analyzed. The main waste streams generated are identified, recycling and landfilling diversion rates are presented and waste recovery through Industrial Symbiosis is discussed. A SWOT analysis was carried out. Results demonstrate that 9% of the waste produced in one of the projects was recovered through Industrial Symbiosis, while in the other project, waste recovery through Industrial Symbiosis achieved the rate of 30%. These data reveal Industrial Symbiosis’ potential to reduce landfilling of industrial construction wastes, contributing to waste recovery in construction. In addition, results show that industrial construction projects can benefit from the following synergies common in Industrial Ecology place-based approaches: centralized waste management service, shared waste management infrastructure and administrative simplification.

  16. Energy Management in Industrial Plants

    Directory of Open Access Journals (Sweden)

    Dario Bruneo

    2012-09-01

    Full Text Available The Smart Grid vision imposes a new approach towards energy supply that is more affordable, reliable and sustainable. The core of this new vision is the use of advanced technology to monitor power system dynamics in real time and identify system in stability. In order to implement strategic vision for energy management, it is possible to identify three main areas of investigation such as smart generation, smart grid and smart customer. Focusing on the latter topic, in this paper we present an application specifically designed to monitor an industrial site with particular attention to power consumption. This solution is a real time analysis tool, able to produce useful results to have a strategic approach in the energy market and to provide statistic analysis useful for the future choices of the industrial company. The application is based on a three layers architecture. The technological layer uses a Wireless Sensor Network (WSN to acquire data from the electrical substations. The middleware layer faces the integration problems by processing the raw data. The application layer manages the data acquired from the sensors. This WSN based architecture represents an interesting example of a low cost and non-invasive monitoring application to keep the energy consumption of an industrial site under control. Some of the added value features of the proposed solution are the routing network protocol, selected in order to have an high availability of the WSN, and the use of the WhereX middleware, able to easily implement integration among the different architectural parts.

  17. Recapturing the corporate environmental management research agenda

    DEFF Research Database (Denmark)

    Ulhøi, John Parm; Madsen, Henning

    2009-01-01

    of corporate environmental management, and to identify any new critical and innovative research which moves beyond the compliance and certification approach. It discusses the threatening effects of consumption and industrialization which the decision makers worldwide have continuously face during the past....

  18. Implementation of environmental management in China

    OpenAIRE

    Håkansson, Susanna

    2005-01-01

    This thesis project was carried out within the cooperation between theIndustrial Ecology Department at Royal Institute of Technology (KTH),Stockholm, Sweden and Center for Space Thermal Science of ShandongUniversity, Jinan, China. The aim of this thesis report is to investigate Environmental ManagementSystem (EMS) and its support system, give a general view of theenvironmental work in companies in China, and make recommendation forSwedish joint ventures how they should work with environmental...

  19. EC environmental legislation and the European oil industry

    International Nuclear Information System (INIS)

    Luding, W.G.

    1993-01-01

    EUROPIA has 32 ordinary member companies which own and operate more than 95% of EC refining capacity, plus three associate member companies from EFTA countries. A large part of EUROPIA's efforts is devoted to environmental issues. Among its initial actions, EUROPIA developed Guiding Principles for environmental management which have been adopted by all member companies. This article can only highlight some of the key areas of EC environmental policy of interest to the oil industry. Most of the comments will refer to air pollution issues but, of course, water and ground pollution and waste are equally important subjects. (orig./HS)

  20. Adaptive Management of Environmental Flows

    Science.gov (United States)

    Webb, J. Angus; Watts, Robyn J.; Allan, Catherine; Conallin, John C.

    2018-03-01

    Adaptive management enables managers to work with complexity and uncertainty, and to respond to changing biophysical and social conditions. Amid considerable uncertainty over the benefits of environmental flows, governments are embracing adaptive management as a means to inform decision making. This Special Issue of Environmental Management presents examples of adaptive management of environmental flows and addresses claims that there are few examples of its successful implementation. It arose from a session at the 11th International Symposium on Ecohydraulics held in Australia, and is consequently dominated by papers from Australia. We classified the papers according to the involvement of researchers, managers and the local community in adaptive management. Five papers report on approaches developed by researchers, and one paper on a community-led program; these case studies currently have little impact on decision making. Six papers provide examples involving water managers and researchers, and two papers provide examples involving water managers and the local community. There are no papers where researchers, managers and local communities all contribute equally to adaptive management. Successful adaptive management of environmental flows occurs more often than is perceived. The final paper explores why successes are rarely reported, suggesting a lack of emphasis on reflection on management practices. One major challenge is to increase the documentation of successful adaptive management, so that benefits of learning extend beyond the project where it takes place. Finally, moving towards greater involvement of all stakeholders is critical if we are to realize the benefits of adaptive management for improving outcomes from environmental flows.

  1. Environmental Management in Product Chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Forman, Marianne

    2009-01-01

    between existing resources, norms and values and external pressures for environmental management (second section). A model for the types of corporate network relations that need to be mapped and understood in order to analyze and/or develop environmental management in a product chain (third section......The chapter aims at giving background to companies, consultants, governmental regulators, NGOs etc. for the analysis and planning of environmental management in specific product chains through: A framework for understanding environmental management in product chains as shaped by the interaction......). An overview of examples from our own research and from literature of the type and the role of environmental issues and initiatives in product chains (fourth section). A typology for characterizing corporate strategies as part of environmental management in product chains and characterizing those competencies...

  2. Industrial management of radioactive wastes

    International Nuclear Information System (INIS)

    Lavie, J.M.

    1984-01-01

    This article deals with the present situation in France concerning radioactive waste management. For the short and medium term, that is to say processing and disposal of low and medium level radioactive wastes, there are industrial processes giving all the guarantees for a safe containment, but improvements are possible. For the long term optimization of solution requires more studies of geologic formations. Realization emergency comes less from the waste production than the need to optimize the disposal techniques. An international cooperation exists. All this should convince the public opinion and should develop planning and realization [fr

  3. Strategic Environmental Assessment: Integrated environmental management

    CSIR Research Space (South Africa)

    Department of Environmental Affairs and Tourism

    2004-01-01

    Full Text Available stream_source_info Department of Environmental Affairs and Tourism_2004.pdf.txt stream_content_type text/plain stream_size 70155 Content-Encoding ISO-8859-1 stream_name Department of Environmental Affairs and Tourism_2004.pdf... and Tourism Other topics in the series of overview information documents on the concepts of, and approaches to, integrated environmental management are listed below. Further titles in this series are being prepared and will be made available periodically...

  4. Environmental radioactivity: A perspective on industrial contributions

    International Nuclear Information System (INIS)

    Baxter, M.S.

    1993-01-01

    This essay aims to show how many non-nuclear industries contributed significantly to natural radioactivity. The examples given include the release of radon-220 and radon-222, as well as other radioisotopes, from the combustion of fossil fuels. Furthermore, edible mussels in the Irish Sea have been found to concentrate polonium-210 from seawater: the original source of the isotope was found to be the waste from a phosphate processing plant. These contributions should be taken into account when the environmental impacts of different industrial activities are compared. 3 tabs

  5. Environmental pollution as engine of industrialization

    Science.gov (United States)

    Antoci, Angelo; Galeotti, Marcello; Sordi, Serena

    2018-05-01

    This paper analyzes the dynamics of a small open economy with two sectors (a farming sector and an industrial one), heterogeneous agents (workers and entrepreneurs) and free inter-sectoral labor mobility. Labor productivity in the first sector is negatively affected by environmental pollution generated by both sectors, whereas in the second sector it is positively affected by physical capital accumulated by entrepreneurs. Through a global analysis of the non-linear three-dimensional dynamic system of the model we derive conditions under which industrialization generates a decline in workers' revenues in both sectors.

  6. Environmental radioactivity: A perspective on industrial contributions

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, M S [International Atomic Energy Agency, Monaco (Monaco). Marine Environment Lab.

    1993-06-01

    This essay aims to show how many non-nuclear industries contributed significantly to natural radioactivity. The examples given include the release of radon-220 and radon-222, as well as other radioisotopes, from the combustion of fossil fuels. Furthermore, edible mussels in the Irish Sea have been found to concentrate polonium-210 from seawater: the original source of the isotope was found to be the waste from a phosphate processing plant. These contributions should be taken into account when the environmental impacts of different industrial activities are compared. 3 tabs.

  7. SITO, Environmental Impact of Major Industrial Activities

    International Nuclear Information System (INIS)

    Mazzini, M.; Oriolo, F.

    1982-01-01

    1 - Description of problem or function: SITO evaluates the impact of major industrial activities on the environment. The method applied accounts for the alterations of ecological, physico-chemical, aesthetical and social values caused by the development of the considered activity. Such values are usually considered as not quantifiable but very important for the quality of the environment. 2 - Method of solution: The territory affected by the industrial project is described in a one-dimensional (for example a coast development) or two-dimensional representation as a lattice of square meshes of equal size. A major feature of the model is that the impact factors are considered with reference to each single mesh. The following vectors and matrices are evaluated: a) Matrix of environmental quality characteristics. It is the product of the environmental quality index matrix and the vector of weighting factors. b) Vector of the initial environmental values. It is the sum of the columns of matrix (a). c) Matrix obtained when the environmental quality characteristics matrix is multiplied by the vector of project action factors, taking into account distance effects. d) Vector of the final environmental values. This is the sum of columns of matrix (c)

  8. The Implications of Industrial Management for the Administration of Industrial Education Programs

    Science.gov (United States)

    White, Michael R.

    1978-01-01

    The paper discusses the functions and principles of industrial management, compares educational and industrial organization, and notes industrial management techniques applicable to industrial education administration. (MF)

  9. Environmental regulations: their impact on the battery and lead industries

    Science.gov (United States)

    Ainley, John R.

    This paper presents a general overview of the past and current position of the lead industry in relation to environmental legislation and its impact. The lead industry has watched environmental lead levels being steadily reduced down to levels that, ten years ago, would have been considered unachievable. Nevertheless, the industry has managed to survive the effect of the ever-increasing demands of environmental controls. During the last ten to twenty years, lead producers and users have had to assess their future positions, as the cost implications of environmental laws have had a significant impact on their bottom lines. Without doubt, this consideration most definitely affected the viability of many plants. The need to be aware of the existence of new and proposed legislation is of paramount importance, as the threat from the vast array of EEC legislation is ever apparent. Lead companies have all considered environmental legislation to have no more than a nuisance value, but it is of vital importance to the future of the industry that such legislation is approached in a positive and sensible way in order to demonstrate a full commitment to protecting both employees and the general environment. Lead must receive the credit that it so richly deserves.

  10. Environmental concerns gaining importance in industry operations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that environmental concerns have leapt to the forefront of industry's concerns in operating in Latin America. The United Nations Conference on Environment and Development in Rio de Janeiro June 3-14 focused a strong world spotlight on the region's environmental and commercial resources. Protection of the region's rain forests, which accounts for a huge share of the world's total, is emerging as an especially contentious issue. Ecuador's Oriente region may well prove the litmus test of how or whether oil and gas companies are able to operate in Latin American rain forests. Controversy over industry operations in the Oriente have heated to the point that environmentalist and native groups have routinely picketed company offices in Quito and used mass fundraiser mailings in North America

  11. Environmental management: The bank's policy approach

    International Nuclear Information System (INIS)

    1992-01-01

    In order to play a leadership role in the environmental recovery of central and eastern Europe, the Bank will pursue the following policy priorities: assistance to the countries of operations in environmental policy formulation, including the development of effective legal and regulatory instruments, the adoption of appropriate emissions and effluents standards and the creation of the institutional and human resources capacity to monitor and enforce them; promoting the use of a variety of economic instruments to address the underlying cause of environmental degradation and the adoption of market-based techniques in environmental management programmes; encouraging the development of an environmental goods and services industry in the countries of operations, of commercially viable investments in environmental technologies and pollution prevention and control, and by funding environmental infrastructure projects; initiation of, or support for, special studies and programmes to address regional and national environmental problems and to promote environmental education within the population and institutions of the countries of operations; adoption of adequate environmental assessment, management planning, audit and monitoring procedures throughout its activities; and promoting the adoption and implementation of procedures for provision of information to, and consultation with, all levels of government and the general public - especially potentially affected parties - concerning environmental matters

  12. Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

    OpenAIRE

    Larissa A. R. U. Freitas; Alessandra Magrini

    2017-01-01

    The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ec...

  13. Auditing of environmental management system

    Directory of Open Access Journals (Sweden)

    Čuchranová Katarína

    2001-12-01

    Full Text Available Environmental auditing has estabilished itself as a valueable instrument to verify and help to improve the environmental performance.Organizations of all kinds may have a need to demonstrate the environmental responsibility. The concept of environmental management systems and the associated practice of environmental auditing have been advanced as one way to satisfy this need.These system are intended to help an organization to establish and continue to meet its environmental policies, objectives, standards and other requirements.Environmental auditing is a systematic and documented verification process of objectively obtaining and evaluating audit evidence to determine whether an organizations environmental management system conforms to the environmental management system audit criteria set by the organization and for the communication of the results of this process to the management.The following article intercepts all parts of preparation environmental auditing.The audit programme and procedures should cover the activities and areas to be considered in audits, the frequency of audits, the responsibilities associated with managing and conducting audits, the communication of audit results, auditor competence, and how audits will be conducted.The International Standard ISO 140011 estabilishes the audit procedures that determine conformance with EMS audit criteria.

  14. Environmental resposibility in the sport industry: Why it makes sense

    Directory of Open Access Journals (Sweden)

    MARILOU IOAKIMIDIS

    2006-01-01

    Full Text Available Environmental responsibility (ER, as a major aspect of corporate social responsibility, is an important issue for organizations in the sport industry as it is for all other organizations. This paper presents three reasons why sport industry firms should embrace environmental responsibility as a management competency. The first is the ethical reason, which consists of two main considerations and applies not just to firms in the sport industry but to all organizations. The second reason pertains specifically to sport organizations and invokes their unique relationship to their customers. The third reason is that embracing ER can lead to economic benefits for the organization. Two main aspects of this advantage –cost savings due to more efficient resource usage and enhanced image– are discussed.

  15. Environmental Restoration Program Control Management System

    International Nuclear Information System (INIS)

    Duke, R.T.

    1992-01-01

    Environmental Restoration managers need to demonstrate that their programs are under control. Unlike most industrial programs, the public is heavily involved in Environmental Restoration activities. The public is demanding that the country prove that real progress is being made towards cleaning up the environment. A Program Control Management System can fill this need. It provides a structure for planning, work authorization, data accumulation, data analysis and change control. But it takes time to implement a control system and the public is losing its patience. This paper describes critical items essential to the quick development and implementation of a successful control system

  16. Data management for environmental research

    International Nuclear Information System (INIS)

    Strand, R.H.

    1976-01-01

    The objective of managing environmental research data is to develop a resource sufficient for the study and potential solution of environmental problems. Consequently, environmnetal data management must include a broad spectrum of activities ranging from statistical analysis and modeling, through data set archiving to computer hardware procurement. This paper briefly summarizes the data management requirements for environmental research and the techniques and automated procedures which are currently used by the Environmental Sciences Division at Oak Ridge National Laboratory. Included in these requirements are readily retrievable data, data indexed by categories for retrieval and application, data documentation (including collection methods), design and error bounds, easily used analysis and display programs, and file manipulation routines. The statistical analysis system (SAS) and other systems provide the automated procedures and techniques for analysis and management of environmental research data

  17. Alternative techniques for environmental project management

    International Nuclear Information System (INIS)

    Reeves, S.

    1994-01-01

    Beginning in the late 1970s and early 1980s, increased regulation and recognition of ground water as an important natural resource led industry to address subsurface contamination at many sites. This caused the industry's dependence on environmental consultants to increase drastically. Initially, the accepted practice for addressing environmental concerns was to rely upon consultants to determine appropriate work scope, budgets, procedures and regulatory interaction. While significant advances have been made in technology and consulting services, improvement in project management and cost containment have been limited. In order to effectively manage environmental projects, it is imperative that business risks and standardized project management practices be factored into environmental solutions. A standardized environmental project management program was developed and applied to projects at petroleum marketing facilities throughout the United States. Following development and implementation, detailed studies were conducted to measure the value of standardization in reducing costs and enhancing efficiencies. The results indicate significant improvement in both reducing project costs and in enhancing the efficiency of consultants

  18. Manual for the classification and prioritization of risks due to major accidents in process and related industries. Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems

    International Nuclear Information System (INIS)

    1996-11-01

    The IAEA, the United Nations Environment Programme (UNEP), the United Nations Industrial Development Organization (UNIDO) and the World Health Organization (WHO) decided in 1986 to join forces in order to promote the use of integrated areas wide approaches to risk management. The Inter-Agency Programme brings together expertise in health, the environment, industry and energy, all vital for effective risk management. The purpose of the Inter-Agency Programme is to develop a broad approach to the identification, prioritization and minimization of industrial hazards in a given geographical area. This is one of a series of publications intended to be issued on behalf of the four participating UN organizations. This is the first revision of the original report, distributed in December 1993. The revision was undertaken in the light of experience with the original edition and was prompted by the wish to add the results of a practical case study and some new developments. 13 figs, 23 tabs

  19. Assistance to Oil and Gas State Agencies and Industry through Continuation of Environmental and Production Data Management and a Water Regulatory Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Grunewald, Ben; Arthur, Dan; Langhus, Bruce; Gillespie, Tom; Binder, Ben; Warner, Don; Roberts, Jim; Cox, D.O.

    2002-05-31

    This grant project was a major step toward completion of the Risk Based Data Management System (RBDMS) project. Additionally the project addresses the needs identified during the projects initial phases. By implementing this project, the following outcomes were sought: (1) State regulatory agencies implemented more formalized environmental risk management practices as they pertain to the production of oil and gas, and injection via Class II wells. (2) Enhancement of oil and gas production by implementing a management system supporting the saving of abandoned or idle wells located in areas with a relatively low environmental risk of endangering underground sources of drinking water (USDWs) in a particular state. (3) Verification that protection of USDWs is adequate and additional restrictions of requirements are not necessary in areas with a relatively low environmental risk. (4) Standardization of data and information maintained by state regulatory agencies and decrease the regulatory cost burden on producers operating in multiple states, and (5) Development of a system for electronic data transfer among operators and state regulatory agencies and reduction of overall operator reporting burdens.

  20. Industry

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.

    2001-01-01

    This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

  1. Environmental management & audit 2: Management systems

    OpenAIRE

    2018-01-01

    The present scientific monograph, entitled “Environmental management & audit“, is the result of three years’ work on an international project entitled “Environmental management in Russian companies – retraining courses for the sensibilization for and integration of Eco-Audit programs in corporate decision-making (RECOAUD)”. Within its more than 600 pages, the monograph features interesting texts written by 31 authors from the European Union and the Russian Federation, edited by dr. Borut Jere...

  2. Scope of environmental risk management

    Energy Technology Data Exchange (ETDEWEB)

    O' Riordan, T

    1979-01-01

    Environmental risk management embraces three techniques for project appraisal: cost/benefit analysis, environmental impact analysis and risk assessment. It also explicitly relates scientific investigations to political judgments, sometimes so closely that the two cannot be separated. Indeed it is now apparent that environmental risk management encompasses procedures both to review the relative merits and priorities of policies as well as to appraise the environmental risks of particular schemes. Until recently this relationship has not been fully appreciated, so much imagination and innovation is still required to develop the most-suitable mechanisms for review.

  3. Environmental risk management

    International Nuclear Information System (INIS)

    Parris, P.A.

    1994-01-01

    A professional, audit able environmental approach is the only path a responsible government, institution or company can take. Such an approach can be applied to a small petrol station, an oil refinery or a multi-million dollar mining development. Environmental issues cannot be divorced from socio-economic criteria; each impacts on the other. Twenty years ago, financial criteria ruled decision making and the environment tagged along a poor third to social and safety issues. Today, financial issued are still dominant, but decision makers realised that environmental issues hold the same weight as socio-economic criteria and the three are inexorably intertwined. (author)

  4. Challenges and Strength of Current Industrial Energy Efficiency Management Practices in Steam Industries

    Science.gov (United States)

    Nkosi, S. B.; Pretorius, J. H. C.

    2017-07-01

    The aim of this study is to achieve greater output by examining the existing way of coordinating the determined attempts of Steam Industries in South Africa to successfully reach a sustainable industrial development by using energy source adequately in a more competent way. Furthermore into the study we look at obstacles that prevent and those that leads to maximum utilization of energy management measures and also highlights the effects of implementing cheap available energy source in South Africa. The investigation and analysis have shown that energy is not well managed in Steam Industries and that the use of energy is minimized and not fully utilized due to poor management and lack of knowledge. Another detection was that lack of government structured and strategic measures of implementing and motivating the use of energy effectively. The effective and rational use of available power by Steam Industries in South Africa is a key player in developing a sustainable industrial development. The use of energy efficiency management strategies has contributed an increase in economic and improve environmentally friendly in the industrial sector. The slow pace adoption of energy saving and cost effective management programmes are negatively impacting on the benefits to Steam Industries in South Africa. In conclusion the study finds that the economy can be boosted by implementing energy efficiency management programmes and environmentally friendly. These will also stabilize the negative impact of energy raising prices.

  5. Environmental protection systems for the petroleum industry

    International Nuclear Information System (INIS)

    Lowe, G.B.

    1996-01-01

    The transportation of petroleum products and other chemicals can involve spillage and leaks despite being closely controlled. Human error in the loading of road tankers or consumers refuelling their vehicles at service stations can lead to spillage accidents. Seepage through permeable concrete and its expansion joints can occur for diesel underground tanks with serious environmental consequences. This article describes methods which could be adopted by the petroleum industry to prevent these accidental incidents from causing environmental pollution. Service station forecourts could be constructed, using precast concrete hexagonal blocks with dry sand between them and then have a coating of sealant to prevent spills from seeping into ground water. Secondary containment for underground tanks should be given an elastomeric membrane coating. (UK)

  6. 76 FR 21877 - Environmental Management Advisory Board

    Science.gov (United States)

    2011-04-19

    ... DEPARTMENT OF ENERGY Environmental Management Advisory Board AGENCY: Department of Energy. ACTION: Notice of call for nominations for appointment to the Environmental Management Advisory Board. SUMMARY... Environmental Management Advisory Board. DATES: Nominations will be accepted through May 13, 2011. ADDRESSES...

  7. Discussion of Environmental Problem and Study of Environmental Impact on Steel Industry in China

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The environmental conditions in steel industry were discussed in detail. It was also pointed out that it was necessary to reduce the quantity of waste generated and discharged by improving the raw material, energy structure and consumption rate, and reinforcing the waste control and management. At the same time, the relevant mathematical models of environmental impact were set up on the basis of raw material consumption, energy consumption and waste generation and discharge in different technical routes of steelmaking. The result showed that the production route of DR-iron clearly has more environmental advantages over that of BF-hot metal.

  8. Resilience and environmental management

    Science.gov (United States)

    Environmental law plays a key role in shaping policy for sustainability. In particular, the types of legal instruments, institutions, and the response of law to the inherent variability in socio-ecological systems is critical. Sustainability likely must occur via the institutions...

  9. New standard environmental management

    International Nuclear Information System (INIS)

    Andriola, Luca; Luciani, Roberto

    2006-01-01

    The ISO 14001:2004 standard, like ISO 9001:2000 on quality management, transcends the preventive approach (based on a rigid and more or less adequate process-management model still mainly inspired by traditional production methods) and introduces in its stead a highly flexible approach applicable to any socio-economic activity. It is structured by processes rather than system elements, and is based on the quest for efficacy and ongoing improvement [it

  10. Sustainable industrial estate by managing the building coverage ratio in Cibitung Industrial Town, Indonesia

    Science.gov (United States)

    Budiyanto, T. M. T.; Prajitno, I. S.; Hasibuan, H. S.

    2018-03-01

    The problem faced in the management of the industrial estate is the development of industrial buildings which are not in accordance with the existing environmental regulations, especially the building coverage ratio (BCR). This violation is due to the limitation of industrial land owned, and the tenant’s desire to maximize building area. This research conducted at Cibitung Industrial Town, Indonesia, to assess the compliance of industrial building in complying with environmental regulations, and efforts by industrial estate manager together with industrial communities to meet building regulations. The compliance is shown from the conformity of the tenant’s BCR to the building provisions contained in the regulation within the industrial estate; which is maximum 60% from land owned. And whether the rest of green open space (GOS) area can still be maintained at a minimum 10%. This study found tenant’s building density (BCR) at 24.55% population was 84.77%, and the rest of green open space at 21.56% population was only 2.49%. Excessive building development and expansion by the industrial communities, led to a continued reduction in green open space as a rainwater absorption area. It is resulting the rainfall runoff directly into the environmental drainage system, and causing flooding in the region.

  11. Environmental and Social Management System Implementation Handbook : Crop Production

    OpenAIRE

    International Finance Corporation

    2014-01-01

    This Handbook is intended to be a practical guide to help companies in the crop production industry develop and implement an environmental and social management system, which should help to improve overall operations. If a company has existing management systems for quality or health and safety, this Handbook will help to expand them to include environmental and social performance. Sectio...

  12. Environmental regulations and industrial competitiveness: evidence from China

    NARCIS (Netherlands)

    S. Stavropoulos (Spyridon); R.S. Wall (Ronald); Xu, Y. (Yuanze)

    2017-01-01

    textabstractEconomic activities are closely related to real-world environmental issues. Currently, more attention is paid to the association between environmental regulations and industrial competitiveness (IC) because of pressures on economic development and environmental protection. In this study,

  13. The Aalborg Approach to Environmental Management

    DEFF Research Database (Denmark)

    Jamison, Andrew; Nielsen, Eskild Holm

    2002-01-01

    The Article Briefly Presents the Master Programme in Environmental Management at Aalborg University......The Article Briefly Presents the Master Programme in Environmental Management at Aalborg University...

  14. Green knowledge management to support environmental sustainability

    International Nuclear Information System (INIS)

    Dornhoefer, Mareike-Jessica

    2017-01-01

    with the help of exemplary implementations. An additional aspect for the development of Green Knowledge Management bases on the intensive analysis of environmental information systems and the possibilities for extending these systems to environmental knowledge systems. The work presents a model of an environmental knowledge system called UmweltWiS. The logic of the system applies semantic technologies to provide a flexible and extensible structure to integrate public linked open data sources with an environmental background. The UmweltWiS concept is designed to be applicable in different application scenarios, in public and private context. This is documented with the help of three use case scenarios of forestry, material science and modern industry 4.0 production environments. At the end of the work it is discussed how Green Knowledge Management may address the recycling and reduction of knowledge to provide possibilities for reusability. The reduction of knowledge supports the prevention of redundant knowledge fragmentation or the usage of outdated knowledge.

  15. Ethiopian Journal of Environmental Studies & Management 7(2 ...

    African Journals Online (AJOL)

    Osondu

    2013-11-01

    Nov 1, 2013 ... Ethiopian Journal of Environmental Studies & Management 7(2): 153 – 159, 2014. ISSN:1998-0507 ... and food processing industries, battery, cement, milling and ..... risks, but can provide basic information on source of water ...

  16. Environmental management: A system approach

    Science.gov (United States)

    Petak, William J.

    1981-05-01

    This paper presents a system framework whose purpose is to improve understanding of environmental management. By analyzing the links between elements of the environmental management system, it is possible to construct a model that aids thinking systematically about the decision-making subsystem, and other subsystems, of the entire environmental management system. Through a multidisciplinary environmental approach, each of the individual subsystems is able to adapt to threats and opportunities. The fields of government, market economics, social responsibility and ecology, for example, are so complex that it is extremely difficult to develop a framework that gives full consideration to all aspects. This paper, through the application of a highly idealized system framework, attempts to show the general relationships that exist between complex system elements.

  17. Environmental Accounting as a Tool for Environmental Management ...

    African Journals Online (AJOL)

    Environmental Accounting as a Tool for Environmental Management System. ... This paper reviews about the relationship of environmental accounting and environmental ... to legal and regulation requirement, to reduce cost from customer

  18. A comparison of ISO 14001 to other related environmental management systems and tools

    International Nuclear Information System (INIS)

    White, S.E.; Byron, D.F.; Livingston, B.L.

    1995-08-01

    Efficient environmental management is of increasing priority for the industrial sector. The achievement of ISO 14001 certification will demonstrate that the environmental management system meets or exceeds industry standards since this standard will be the accepted international measure of environmental management. A review of published environmental management systems and tools was conducted to ensure all aspects of environmental management are covered in the establishment or formalization of an environmental management system. The objective of this effort is to compare the ISO 14001 standard with other environmental management systems and tools

  19. Social management in traditional, industrial and post-industrial society: the prospects for management systems development

    Directory of Open Access Journals (Sweden)

    V S Mukhametzhanova

    2010-09-01

    Full Text Available The article is devoted to social management development at different stages of society's evolution - traditional, industrial and post-industrial. The historical types of social management are highlighted.

  20. INTEGRATION OF ENVIRONMENTAL MANAGEMENT SYSTEM

    OpenAIRE

    Tomescu Ada Mirela

    2012-01-01

    The relevance of management as significant factor of business activity can be established on various management systems. These will help to obtain, organise, administrate, evaluate and control particulars: information, quality, environmental protection, health and safety, various resources (time, human, finance, inventory etc). The complexity of nowadays days development, forced us to think ‘integrated’. Sustainable development principles require that environment management policies and p...

  1. System analysis of industrial waste management: A case study of industrial plants located between Tehran and Karaj

    OpenAIRE

    Mohammad Amin Karami; Mohsen Sadani; Mehdi Farzadkia; Nezam Mirzaei; Anvar Asadi

    2015-01-01

    Aims: In this study, management of industrial waste in industries located between Tehran and Karaj in 2009-2010 was examined. Materials and Methods: This is a cross-sectional study which was done by site survey (Iranian environmental protection organization) questionnaire usage and results analysis. This questionnaire was consisted of 45 questions about industrial waste, quantity, quality, and management. A total number of industries with over 50 employees was 283, and Stratified sampling...

  2. Hospitality Management: Perspectives from Industry Advisor

    Directory of Open Access Journals (Sweden)

    Rachel Roginsky

    2013-07-01

    Full Text Available In prior quarterly reports, Pinnacle Advisory Group presented timely updates about the New England lodging industry, which included focused profiles on particular cities. In this issue, the firm offers more general insight about the hospitality industry. Several Pinnacle executives recently participated in a panel discussion about investment, management, and careers in the hospitality industry.

  3. Environmental impacts assessment of industrial estate providing with managerial process

    Energy Technology Data Exchange (ETDEWEB)

    Nouri, J.; Mahvi, A.H.; Younesian, M.; Nabizadeh, R.; Hashemi, I. [Univ. of Tehran (Iran)

    2007-07-01

    industrial estate at the construction and operational phases. The environmental impact assessment of the investigated estate was studied at the three terms of immediate, direct and indirect impacts at the short, medium and long term. By expanding of Leopold Matrix to four part matrix, in addition to amount, importance and extent of the impacts, the remaining duration of impact in the environment was assessed as a separate factor. The results of the study with two alternatives, No (performance of the project with no concern for environmental issues) and Yes (performance of the project with application of harmful environmental imapcts), were studied in construction and operation phases. The impact assessment of 'No' property resulted (-1065), therefore the execution of the project was rejected, but after reducing the harmful impact performance which resulted (+1095) has been accepted. Therefore the method of reducing harmful environmental impacts along with environmental management programs were introduced and accepted in this study.

  4. INTEGRATION OF ENVIRONMENTAL MANAGEMENT SYSTEM

    Directory of Open Access Journals (Sweden)

    Tomescu Ada Mirela

    2012-07-01

    Full Text Available The relevance of management as significant factor of business activity can be established on various management systems. These will help to obtain, organise, administrate, evaluate and control particulars: information, quality, environmental protection, health and safety, various resources (time, human, finance, inventory etc. The complexity of nowadays days development, forced us to think ‘integrated’. Sustainable development principles require that environment management policies and practices are not good in themselves but also integrate with all other environmental objectives, and with social and economic development objectives. The principles of sustainable development involve that environment management policies and practices. These are not sound in them-self but also integrate with all other environmental objectives, and with social and economic development objectives. Those objectives were realized, and followed by development of strategies to effects the objective of sustainable development. Environmental management should embrace recent change in the area of environmental protection, and suit the recently regulations of the field -entire legal and economic, as well as perform management systems to meet the requirements of the contemporary model for economic development. These changes are trailed by abandon the conventional approach of environmental protection and it is replaced by sustainable development (SD. The keys and the aims of Cleaner Productions (CP are presented being implemented in various companies as a non-formalised environmental management system (EMS. This concept is suggested here as a proper model for practice where possible environmental harmful technologies are used -e.g. Rosia Montana. Showing the features and the power of CP this paper is a signal oriented to involve the awareness of policy-makers and top management of diverse Romanian companies. Many companies in European countries are developing

  5. Environmental data management at Fernald

    International Nuclear Information System (INIS)

    Jones, B.W.; Williams, J.

    1994-01-01

    FERMCO supports DOE's ongoing initiatives for the continuous improvement of site restoration through the development and application of innovative technologies. A major thrust of FERMCO's efforts has been the enhancement of environmental data management technology for the site. The understanding of environmental data is the fundamental basis for determining the need for environmental restoration, developing and comparing remedial alternatives, and reaching a decision on how to clean up a site. Environmental data management at Fernald is being focused on two major objectives: to improve the efficiency of the data management process, and to provide a better understanding of the meaning of the data at the earliest possible time. Environmental data at Fernald is typically a soil or groundwater sample collected by one of the field geologists. These samples are then shipped to one or more laboratories for analysis. After the analyses are returned from the laboratories the data are reviewed and qualified for usability. The data are then used by environmental professionals for determining nature and extent of contamination. Additionally, hazardous waste materials whether generated during production or during cleanup, may be sampled to characterize the waste before shipment or treatment. The data management process, which uses four major software systems, is presented graphically

  6. Environmental management in North American mining sector.

    Science.gov (United States)

    Asif, Zunaira; Chen, Zhi

    2016-01-01

    This paper reviews the environmental issues and management practices in the mining sector in the North America. The sustainable measures on waste management are recognized as one of the most serious environmental concerns in the mining industry. For mining activities, it will be no surprise that the metal recovery reagents and acid effluents are a threat to the ecosystem as well as hazards to human health. In addition, poor air quality and ventilation in underground mines can lead to occupational illness and death of workers. Electricity usage and fuel consumption are major factors that contribute to greenhouse gases. On the other hand, many sustainability challenges are faced in the management of tailings and disposal of waste rock. This paper aims to highlight the problems that arise due to poor air quality and acid mine drainage. The paper also addresses some of the advantages and limitations of tailing and waste rock management that still have to be studied in context of the mining sector. This paper suggests that implementation of suitable environmental management tools like life cycle assessment (LCA), cleaner production technologies (CPTs), and multicriteria decision analysis (MCD) are important as it ultimately lead to improve environmental performance and enabling a mine to focus on the next stage of sustainability.

  7. Impact of ISO 14001 certification on the environmental performance of organizations: case study of industries in the Republic of Colombia

    OpenAIRE

    Vargas Bejarano, Carlos Hernando

    2002-01-01

    This preliminary study of an exploratory-descriptive nature compares attitude towards environmental management and administration expressed by companies (large, medium and small) from the industrial sector in Colombia since 1999; emphasis was made on analysing the current relation between adopting an ISO 14001 Environmental Management System and the companies' environmental performance. The study reveals the state of development of the Environmental Management System of Colombian industries o...

  8. Environmental health research in Japan - management of environmental risks

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Masahisa [Lake Biwa Research Institute (Japan)

    1997-12-31

    Briefly discussed the topics on emerging environmental health risks, their assessment and management, with special emphasis on groundwater management , environmental contamination, source protection, new drinking water and ambient water quality standards; and sophistication in instrumentation in environmental quality measurements, hazards and risk assessment and control, technology development in environmental health risk management.

  9. Environmental health research in Japan - management of environmental risks

    International Nuclear Information System (INIS)

    Masahisa Nakamura

    1996-01-01

    Briefly discussed the topics on emerging environmental health risks, their assessment and management, with special emphasis on groundwater management , environmental contamination, source protection, new drinking water and ambient water quality standards; and sophistication in instrumentation in environmental quality measurements, hazards and risk assessment and control, technology development in environmental health risk management

  10. Economic aspects of management of oil industry

    International Nuclear Information System (INIS)

    Purina, I.; Sipkovs, P.

    1997-01-01

    Oil industry is characterised by huge and long-term capital investments. This is one of the most specific features of the industry which has to be taken into account during the preparation of oil industry management framework by the state institutions. This article covers specific issues of cash flows and risks intrinsic in the oil industry projects as well as economic instruments to be applied. (author)

  11. Management Model Applicable to Metallic Materials Industry

    Directory of Open Access Journals (Sweden)

    Adrian Ioana

    2013-02-01

    Full Text Available This paper presents an algorithmic analysis of the marketing mix in metallurgy. It also analyzes the main correlations and their optimizing possibilities through an efficient management. Thus, both the effect and the importance of the marketing mix, for components (the four “P-s” areanalyzed in the materials’ industry, but their correlations as well, with the goal to optimize the specific management. There are briefly presented the main correlations between the 4 marketing mix components (the 4 “P-s” for a product within the materials’ industry, including aspects regarding specific management.Keywords: Management Model, Materials Industry, Marketing Mix, Correlations.

  12. Development of a master plan for industrial solid waste management

    International Nuclear Information System (INIS)

    Karamouz, M.; Zahraie, B.; Kerachian, R.; Mahjouri, N.; Moridi, A.

    2006-01-01

    Rapid industrial growth in the province of Khuzestan in the south west of Iran has resulted in disposal of about 1750 tons of solid waste per day. Most of these industrial solid wastes including hazardous wastes are disposed without considering environmental issues. This has contributed considerably to the pollution of the environment. This paper introduces a framework in which to develop a master plan for industrial solid waste management. There are usually different criteria for evaluating the existing solid waste pollution loads and how effective the management schemes are. A multiple criteria decision making technique, namely Analytical Hierarchy Process, is used for ranking the industrial units based on their share in solid waste related environmental pollution and determining the share of each unit in total solid waste pollution load. In this framework, a comprehensive set of direct, indirect, and supporting projects are proposed for solid waste pollution control. The proposed framework is applied for industrial solid waste management in the province of Khuzestan in Iran and a databank including GIS based maps of the study area is also developed. The results have shown that the industries located near the capital city of the province, Ahwaz, produce more than 32 percent of the total solid waste pollution load of the province. Application of the methodology also has shown that it can be effectively used for development of the master plan and management of industrial solid wastes

  13. Anaerobes in Industrial- and Environmental Biotechnology.

    Science.gov (United States)

    Hatti-Kaul, Rajni; Mattiasson, Bo

    Anaerobic microorganisms present in diverse ecological niches employ alternative strategies for energy conservation in the absence of oxygen which enables them to play a key role in maintaining the global cycles of carbon, nitrogen, and sulfur, and the breakdown of persistent compounds. Thereby they become useful tools in industrial and environmental biotechnology. Although anaerobes have been relatively neglected in comparison to their aerobic counterparts, with increasing knowledge about their diversity and metabolic potential and the development of genetic tools and process technologies to utilize them, we now see a rapid expansion of their applications in the society. This chapter summarizes some of the developments in the use of anaerobes as tools for biomass valorization, in production of energy carriers and chemicals, wastewater treatment, and the strong potential in soil remediation. The ability of several autotrophic anaerobes to reduce carbon dioxide is attracting growing attention as a means for developing a platform for conversion of waste gases to chemicals, materials, and biofuels.

  14. Use of GIS Tools for Environmental Conflict Resolution at Map Ta Phut Industrial Zone in Thailand

    Directory of Open Access Journals (Sweden)

    Phattraporn Soytong

    2014-04-01

    Full Text Available Special industrial zones are favored over scattered industries from an environmental management perspective, but poor management can lead to conflicts. This paper presents an analysis of the environmental conflict that arose between the state, society, and industry stakeholders in an industrial zone of the Eastern Seaboard Development Program of Thailand. This paper seeks to determine the effectiveness of policy measures implemented by the state to resolve the conflict. The purpose of this study is to draw lessons for industrializing nations that adopt the industrial zone model to foster environmentally sustainable industrial development. The study revealed that blatant violation of land-use planning regulations and expansion of the industrial zone into community areas was a root cause of the conflict. Through legal action, civil society has been successful in forcing the state and industries to halt unplanned expansion of industrial areas and practice better environmental governance. However, inadequate commitment by the state and industry stakeholders seems to perpetuate the conflict, threatening the sustainability of economic gains. A Geographic Information Systems (GIS-based analysis confirmed that the policy interventions of the government to resolve the conflict have not produced significant results. This paper highlights the need for GIS-based environmental quality monitoring for guiding industrialization-based urban development towards sustainability.

  15. Canada's Fashion Industry--Can It Be Environmentally Responsible?

    Science.gov (United States)

    Wrobel, Kim; Capjack, Linda

    1993-01-01

    Consumers must realize how vital the fur industry is to Canada, and those within the industry must educate consumers about both sides of the environmental story. The Canadian textile and apparel industries also must take a proactive role in promoting environmentally responsible actions. (JOW)

  16. Environmental Management Science Program Workshop

    Energy Technology Data Exchange (ETDEWEB)

    None

    1998-07-01

    This program summary book is a compendium of project summaries submitted by principal investigators in the Environmental Management Science Program and Environmental Management/Energy Research Pilot Collaborative Research Program (Wolf-Broido Program). These summaries provide information about the most recent project activities and accomplishments. All projects will be represented at the workshop poster sessions, so you will have an opportunity to meet with the researchers. The projects will be presented in the same order at the poster session as they are presented in this summary book. Detailed questions about an individual project may be directed to the investigators involved.

  17. 3.4 Environmental impacts: energy industry

    International Nuclear Information System (INIS)

    2004-01-01

    The subchapter 3.4 'Environmental impact of the energy industry' of the 7th state of the environment report analyzes the current situation in Austria and briefly describes the following aspects: environmental policy targets, uniform taxation of energy, use of renewable energy sources, efficient use of energy, energy input, electricity supply and input, energy input into space heating and air conditioning systems, and renewable energy. In 2002, the input of final energy was risen by about 5 % in comparison to 1998. During this period, the largest increments in final energy inputs were recorded in the mobility sector with + 9.4 %, and in the private households sector with + 8.3 % . The goods production sector showed a slight decrease of about 1.3 % between 1998 and 2002. The 'goods production', 'mobility' and 'private households' sectors combined require about 87 % of the total final energy input. The final energy input for space heating and hot water in 2001 was 5.7 % above the input in 1998. Energy supply from renewable energy sources rose by about 13.8 % in 2002 compared to 1998. Domestic electricity consumption (excluding consumption for pumped-storage systems) in 2002 was about 10.5 % above consumption in 1998. Physical imports and physical exports in 2002 increased about 32 % and 8.6 % correspondingly compared to 1999. (nevyjel)

  18. Environmental management in product chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Forman, Marianne; Hansen, Anne Grethe

    of environmental initiatives, a number of recommendations for governmental regulation, which can support the further diffusion of environmental management in product chains, are developed. Furthermore, the report describes a number of theoretical perspectives from sociology of technology, organisation theory......This report presents the analyses of the shaping, implementation and embedding of eight types of environmental initiatives in product chains. The analyses focus on • the role of the type of product and branch, of the size of the companies and of governmental regulation • the focus...... of the environmental concerns and the reductions in environmental impact • organisational changes which have been part of the embedding of the initiatives The analyses are based on 25 cases from national and international product chains involving one or more Danish companies. Based on the analyses of the eight types...

  19. Environmental Aspects of Load Management

    International Nuclear Information System (INIS)

    Abaravicius, Juozas

    2004-02-01

    This study approaches load management from an environmental perspective. It identifies and discusses the possible environmental benefits of load management and evaluates their significance, primary focusing on CO 2 emissions reduction. The analysis is carried out on two levels: national - the Swedish electricity market, and local - one electric utility in southern Sweden. Our results show the importance of considering the influence of site-specific or level-specific conditions on the environmental effects of load management. On the national level, load management measures can hardly provide significant environmental benefits, due to the high hydropower production in Sweden, which is the demand following production source. Emission reductions will rather be the result of energy efficiency measures, which will cut the load demand as well as the energy demand. However, when it comes to a local (utility) level, where load management is considered as an alternative to an installation of peak diesel power plant, the benefits are clear. It is demonstrated that significant CO 2 emissions savings can be achieved due to avoided peak diesel power production

  20. Environmental management initiatives and stakeholder influences

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    1999-01-01

    in Danish industrial companies. These findings are discussed in the light of similar reported results and case studies of companies which are reportedly pioneers in the introduction of environmental initiatives from a number of EU countries. Implications for theory, practice and training are addressed...... of change, from the point of view of stakeholder theory, from a merely reactive attitude in industry, where companies only tend to respond to stakeholder pressure which cannot be ignored (e.g. ex post responses to one or two stakeholders, such as regulators and customers), towards an increasingly proactive...... attitude characterised by ex ante responses to several strategic groups of stakeholders (including NGOs, employees, neighbours, etc.). The present situation is illustrated by the findings in two recent surveys concerning perceived stakeholder influence in relation to environmental management initiatives...

  1. Energy efficiency through integrated environmental management.

    Science.gov (United States)

    Benromdhane, Souad Ahmed

    2015-05-01

    Integrated environmental management became an economic necessity after industrial development proved to be unsustainable without consideration of environmental direct and indirect impacts. Energy dependency and air pollution along with climate change grew into major challenges facing developed and developing countries alike. Thus, a new global market structure emerged and changed the way we do trade. The search intensified for alternatives to petroleum. However, scientists, policy makers, and environmental activists agreed to focus on strategic conservation and optimization of energy use. Environmental concerns will remain partially unaddressed with the current pace of consumption because greenhouse gas emissions will continue to rise with economic growth. This paper discusses energy efficiency, steady integration of alternative sources, and increased use of best available technologies. Energy criteria developed for environmental labeling certification are presented. Our intention is to encourage manufacturers and service providers to supply consumers with less polluting and energy-consuming goods and services, inform consumers of the environmental and energy impacts, and thereby instill sustainable and responsible consumption. As several programs were initiated in developed countries, environmental labeling requirements created barriers to many exports manufactured in developing countries, affecting current world trade and putting more pressure on countries to meet those requirements. Defining an institutional and legal framework of environmental labeling is a key challenge in implementing such programs for critical economic sectors like tourism, textiles, and food production where energy needs are the most important aspect to control. A case study of Tunisia and its experience with eco-labeling is presented.

  2. Guide for Industrial Waste Management

    Science.gov (United States)

    The purpose of the Guide is to provide facility managers, state and tribal regulators, and the interested public with recommendations and tools to better address the management of land-disposed, non-hazardousindustrial wastes.

  3. Assessment of industrial liquid waste management in Omdurman Industrial Area

    International Nuclear Information System (INIS)

    Elnasri, R. A. A.

    2003-04-01

    This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

  4. Assessment of industrial liquid waste management in Omdurman Industrial Area

    Energy Technology Data Exchange (ETDEWEB)

    Elnasri, R A. A. [Institute of Environmental Studies, University of Khartoum, Khartoum (Sudan)

    2003-04-15

    This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

  5. Facilities management and industrial safety

    International Nuclear Information System (INIS)

    2003-06-01

    This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

  6. ISO 14001 ENVIRONMENTL MANAGEMENT SYSTEMS IN GOVERNMENT AND INDUSTRY

    Science.gov (United States)

    Two new USEPA documents address environmental management systems (EMS) from the perspectives of government and industry and are offered as tools for understanding the process of the ISO 14000 Standards development and usefulness of an EMS approach. The first document, ISO 14001 -...

  7. Design Management in the Textile Industry

    DEFF Research Database (Denmark)

    Bang, Anne Louise

    2013-01-01

    In this paper we explore textile design activities and textile design management from an industrial network perspective. The textile industry is probably one of the most globalized manufacturing industries in the world and thus one of the most dispersed industries on the globe. Most studies...... on design management are framed inside the organisational context of the firm. In this study the role and practice of textile design is addressed in perspective of the global textile production network. The empirical data stems from six case studies exploring how different types of enterprises are organised...

  8. MANAGEMENT SOFT-FACTORS IN INDUSTRIES

    Directory of Open Access Journals (Sweden)

    L. V. Fatkin

    2012-01-01

    Full Text Available No proper attention is given in existing management theories and concepts to systematization and analysis of non-material management factors, so-called «soft-factors». In industries, management soft-factors may be treated in a broader way. An example of a broader treatment of management soft-factors is given for the system of state regulation of foreign trade activities in industries along with specification, determination and rating of organizational and administrative management soft-factors.

  9. Stakeholders and environmental management practices: an institutional framework

    Energy Technology Data Exchange (ETDEWEB)

    Delmas, Magali [California Univ., Santa Barbara, CA (United States); Toffel, Michael W. [California Univ., Berkeley, CA (United States)

    2004-07-01

    Despite burgeoning research on companies' environmental strategies and environmental management practices, it remains unclear why some firms adopt environmental management practices beyond regulatory compliance. This paper leverages institutional theory by proposing that stakeholders - including governments, regulators, customers, competitors, community and environmental interest groups, and industry associations - impose coercive and normative pressures on firms. However, the way in which managers perceive and act upon these pressures at the plant level depends upon plant- and parent-company-specific factors, including their track record of environmental performance, the competitive position of the parent company and the organizational structure of the plant. Beyond providing a framework of how institutional pressures influence plants' environmental management practices, various measures are proposed to quantify institutional pressures, key plant-level and parent-company-level characteristics and plant-level environmental management practices. (Author)

  10. Environmental Remediation Data Management Tools

    International Nuclear Information System (INIS)

    Wierowski, J. V.; Henry, L. G.; Dooley, D. A.

    2002-01-01

    Computer software tools for data management can improve site characterization, planning and execution of remediation projects. This paper discusses the use of two such products that have primarily been used within the nuclear power industry to enhance the capabilities of radiation protection department operations. Advances in digital imaging, web application development and programming technologies have made development of these tools possible. The Interactive Visual Tour System (IVTS) allows the user to easily create and maintain a comprehensive catalog containing digital pictures of the remediation site. Pictures can be cataloged in groups (termed ''tours'') that can be organized either chronologically or spatially. Spatial organization enables the user to ''walk around'' the site and view desired areas or components instantly. Each photo is linked to a map (floor plan, topographical map, elevation drawing, etc.) with graphics displaying the location on the map and any available tour/component links. Chronological organization enables the user to view the physical results of the remediation efforts over time. Local and remote management teams can view these pictures at any time and from any location. The Visual Survey Data System (VSDS) allows users to record survey and sample data directly on photos and/or maps of areas and/or components. As survey information is collected for each area, survey data trends can be reviewed for any repetitively measured location or component. All data is stored in a Quality Assurance (Q/A) records database with reference to its physical sampling point on the site as well as other information to support the final closeout report for the site. The ease of use of these web-based products has allowed nuclear power plant clients to plan outage work from their desktop and realize significant savings with respect to dose and cost. These same tools are invaluable for remediation and decommissioning planning of any scale and for recording

  11. Environmental asset management: Risk management systems

    CSIR Research Space (South Africa)

    Naudé, Brian

    2017-07-01

    Full Text Available bnaude@csir.co.za Charl Petzer Council for Scientific and Industrial Research PO Box 395 Pretoria 0001 South Africa +2712 841 4292 CPetzer1@csir.co.za Copyright © 2017 by B Naudé, C Petzer. Published and used by INCOSE with permission.... Charl Petzer is registered professional engineer with 30 years of programme/project management as well as systems engineering experience in military and other environments. He has been the lead systems engineer, as well as programme manager on several...

  12. Tunnel Vision in Environmental Management.

    Science.gov (United States)

    Miller, Alan

    1982-01-01

    Discusses problem-solving styles in environmental management and the specific deficiencies in these styles that might be grouped under the label "tunnel vision," a form of selective attention contributing to inadequate problem-formulation, partial solutions to complex problems, and generation of additional problems. Includes educational…

  13. Interactions management in environmental policy

    NARCIS (Netherlands)

    Krozer, Yoram; Franco Garcia, Maria Maria; Micallef, David

    2013-01-01

    Purpose: The paper aims to address regulator-management interactions in environmental policy with reference to direct regulations, social regulations and market-based regulation. Design/methodology/approach: Revision of literature to identify the European Union regulations for companies producing

  14. Industrial energy management; Betriebliches Energiemanagement

    Energy Technology Data Exchange (ETDEWEB)

    Goebel, D.

    2007-07-01

    Effective and successful energy and facility management uses a holistic view in which the life cycles of plants and buildings are considered, plus efficient controlling and reporting. The challenge is not in short-term cost reduction but in ensuring long-term effects. This requires management strategies which make use of synergy effects by means of interdisciplinary measures. Main topics: management of energy utilization, energy conversion and energy supply. (GL)

  15. Exploration of Barriers in Achieving Proactive Environmental Strategies in a Natural Rubber Industry : A Case Study

    Directory of Open Access Journals (Sweden)

    Syarifa Arum Kusumastuti

    2016-05-01

    Full Text Available As the evolving of environmental issues over time, the development of environmental management approaches in industries began to shift to the prevention of pollution to reduce environmental impact. However, in practice, many obstacles encountered during the environmental management change to be more proactive. This study aims to explore the barriers of achieving the proactive environmental strategy in a rubber processing industry. Used a case study approach in a natural rubber processing factory, the data was collected through interviews with experts and sources as well as observation in the field. This study shows main barriers that faced by the company consist of financial issue, human resources, communities’ pressure, technological change and communication with environmental experts. The results of this study suggest conducting cooperation with research institutions or environmental experts especially for skills that cannot be controlled by the manager or employees in the company. 

  16. Selected industrial and environmental applications of neutron activation analysis

    International Nuclear Information System (INIS)

    Kucera, J.

    1999-01-01

    A review of the applications of Instrumental Neutron Activation Analysis (INAA) in the industrial and environmental fields is given. Detection limits for different applications are also given. (author)

  17. Environmental management of business processes

    Directory of Open Access Journals (Sweden)

    Vesna Čančer

    2000-01-01

    Full Text Available Since the decision-makers in enterprises will accept the goals of environmental management only if they are motivated enough, comprehensible and useful tools should be generated to support environmentally oriented business decision-making. For that reason, a general optimisation model of the multiphase business process is presented in this paper. This model includes the possibilities for an integrated approach to environmental protection so that it can be applied as a scenario by the business process simulation for the evaluation of environmentally oriented business decisions on business performance. Furthermore, development and application possibilities of the presented model are introduced. Some measures of resource efficiency are developed using the presented optimisation model.

  18. Environmental management (Republic of Macedonia)

    International Nuclear Information System (INIS)

    1997-01-01

    A number of institutions are responsible for environmental monitoring, however, coordination between these agencies is poor. Also, not all parameters typically used to index pollution are measured due to lack of resources, unavailability of chemicals for analysis and obsolete equipment. The cause-effect relationship between health and pollution is not clearly known, except for a new urban areas. In order to create an efficient environmental management system, alterations of the present institutional structure are imperative. It is necessary to strengthen the Ministry of Urban Planning, Construction and Development as a short-term task to consider the need for establishing a separate Ministry of Environment in the long-term. The Ministry of Environment should be supported by an Environmental Institute, a modern inspection service and a department for staff training and international cooperation. The need to reinforce local units responsible for environmental enforcement is especially emphasized. (author)

  19. Industrial pollutions is an environmental issue of Karachi urban area

    International Nuclear Information System (INIS)

    Jokhio, M.H.; Abro, M.I.; Essani, A.

    2005-01-01

    The Industrial pollution is one of the serious Environmental issues of the Karachi urban area, categorized as air pollution and water pollution. The localization more the 6000 industries in Karachi urban area at four different sites of Sindh industrial trading estate, Landhi industrial trading estate, Korangi industrial area west Warf industrials, Port Qasim industrial. Area and Hub industrial are near Karachi city. The major iron and steel industries includes Pakistan steel mills and its allied industries at Bin Qasim more than 100 re-rolling industries are located at site area. Karachi ship yard engineering works, Peoples steel Mill, automobile industries and various manufacturing industries which requires metal and its alloy in manufacturing of product mostly located at Bin Qasim, Korangi, and Shershah site areas. None of the industrial sector contain the waster treatment or recycling plant. The ill planted growth of Karachi and its industries caused the environmental degradation of the city and its coastal areas complete with massive mangrove destruction, air water, fishing, and agriculture possessing a potential threat to the lives of more than 10 million citizens. The environmental issues of the metal related industries include the scrap, waste and pollution. Scrapes am waste of the metal industries can be reused in other manufacturing of engineering materials or recycled to produce the new material. However the pollution is the one of the major environmental issue related with the metal industries which need the considerable research and development work in order to over come the serve environmental issues of the urban areas. This article reviews and identifies the level of industrial pollution emphasized on metal related industries of the Karachi urban areas. (author)

  20. Environmental effects from the nuclear industry

    International Nuclear Information System (INIS)

    1975-01-01

    Since 1969 several meetings have been convened to study the possibility of using high-level radiation in waste treatment. It was agreed that ionizing radiation offered some compromise as a feasible technology for a certain unique purpose, but economic considerations mitigated any overwhelming enthusiasm for early industrial realization. Recently a significant change has taken place in the world energy supply picture, and the expanded projection of nuclear power generation affects the analysis of comparative economic feasibility of ionizing radiation treatment of wastes. In addition, increased consideration of environmental quality not only calls for the re-evaluation of conventional waste treatment technologies, but also the development of more effective means where conventional methods might be unsatisfactory. As a result of several allied considerations, it was thought necessary and timely to review the status of research and development in the application of ionizing radiation to waste treatment and to consider the environmental implication of the proposed technology. Accordingly, the Symposium on the Use of High-Level Radiation in Waste Treatment - Status and Prospects was convened by the IAEA, in co-operation with the Government of the Federal Republic of Germany and the Bayerische Landesanstalt fur Bodenkultur und Pflanzenbau. Forty-eight papers were presented in eight sessions covering the current technology of waste-water treatment and re-use, radiosensitivity of micro-organisms, disinfection and microbiological control, physical and chemical modification of aqueous pollutants, technological and economic considerations, pilot-plant design and operating experiences, and radiation treatment of gaseous and solid wastes

  1. Heterogeneity of the environmental regulation of industrial wastewater: European wineries.

    Science.gov (United States)

    Román-Sánchez, Isabel M; Aznar-Sánchez, José A; Belmonte-Ureña, Luis J

    2015-01-01

    The European legislation of the pollution of industrial wastewater shows a high degree of heterogeneity. This fact implies that there is a market failure with relevant consequences. Within the European Union, each Member State performs a specific transposition of the Water Framework Directive 2000/60. The member states introduce different sanitation fees to correct water pollution. In this paper, the case of the European wine industry is analyzed. It studies the sanitation fees of the five major wine producing countries: France, Italy, Spain, Germany and Portugal. Results show significant differences among the wastewater fees and the study reveals how such heterogeneity leads to relevant market distortions. The research concludes that more homogeneous environmental regulation would promote more sustainable wine production processes with more efficient water management and purification systems, as well as the introduction of cutting edge technologies.

  2. Customer relationship management in the fashion industry

    OpenAIRE

    Kamblevičiūtė, Kamilė

    2016-01-01

    Customer Relationship Management in the Fashion Industry The fashion industry is a product of the modern age. In ancient times, most of clothes were handmade, or so-called home-made, which were made on individual basis. Due to the development of new technologies, the rise of global capitalism, the expansion of factory systems, the attitude towards the concept of clothing was shifting. The fashion industry consists of four levels: raw material, the design of fashion goods, manufacturing, marke...

  3. Barriers analysis for green supply chain management implementation in Indian industries using analytic hierarchy process

    DEFF Research Database (Denmark)

    Govindan, Kannan; Kaliyan, Mathiyazhagan; Kannan, Devika

    2014-01-01

    to the implementation of a green supply chain management (Green SCM) based on procurement effectiveness. A total of 47 barriers were identified, both through detailed literature and discussion with industrial experts and through a questionnaire-based survey from various industrial sectors. Essential barriers......Manufacturing industries started adopting the green concept in their supply chain management recently to focus on environmental issues. But, industries still struggle to identify barriers hindering green supply chain management implementation. This work focuses on identifying barriers...

  4. HISPANIC ENVIRONMENTAL AND WASTE MANAGEMENT OUTREACH PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Sebastian Puente

    1998-07-25

    The Department of Energy Office of Environmental Management (DOE-EM) in cooperation with the Self Reliance Foundation (SRF) is conducting the Hispanic Environmental and Waste Management Outreach Project (HEWMO) to increase science and environmental literacy, specifically that related to nuclear engineering and waste management in the nuclear industry, among the US Hispanic population. The project will encourage Hispanic youth and young adults to pursue careers through the regular presentation of Spanish-speaking scientists and engineers and other role models, as well as career information on nationally broadcast radio programs reaching youth and parents. This project will encourage making science, mathematics, and technology a conscious part of the everyday life experiences of Hispanic youth and families. The SRF in collaboration with the Hispanic Radio Network (HRN) produces and broadcasts radio programs to address the topics and meet the objectives as outlined in the Environmental Literacy Plan and DOE-EM Communications Plan in this document. The SRF has in place a toll-free ''800'' number Information and Resource Referral (I and RR) service that national radio program listeners can call to obtain information and resource referrals as well as give their reactions to the radio programs that will air. HRN uses this feature to put listeners in touch with local organizations and resources that can provide them with further information and assistance on the related program topics.

  5. HISPANIC ENVIRONMENTAL AND WASTE MANAGEMENT OUTREACH PROJECT

    International Nuclear Information System (INIS)

    Sebastian Puente

    1998-01-01

    The Department of Energy Office of Environmental Management (DOE-EM) in cooperation with the Self Reliance Foundation (SRF) is conducting the Hispanic Environmental and Waste Management Outreach Project (HEWMO) to increase science and environmental literacy, specifically that related to nuclear engineering and waste management in the nuclear industry, among the US Hispanic population. The project will encourage Hispanic youth and young adults to pursue careers through the regular presentation of Spanish-speaking scientists and engineers and other role models, as well as career information on nationally broadcast radio programs reaching youth and parents. This project will encourage making science, mathematics, and technology a conscious part of the everyday life experiences of Hispanic youth and families. The SRF in collaboration with the Hispanic Radio Network (HRN) produces and broadcasts radio programs to address the topics and meet the objectives as outlined in the Environmental Literacy Plan and DOE-EM Communications Plan in this document. The SRF has in place a toll-free ''800'' number Information and Resource Referral (I and RR) service that national radio program listeners can call to obtain information and resource referrals as well as give their reactions to the radio programs that will air. HRN uses this feature to put listeners in touch with local organizations and resources that can provide them with further information and assistance on the related program topics

  6. Environmental Regulation and Innovation Dynamics in the Oil Tanker Industry

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Vidic-Perunovic, Jelena

    2012-01-01

    The maritime industry is widely seen as less permeable to innovation than other industries. However, the industry is now recognizing that demands for increased environment protection can only be achieved by more innovation.This study demonstrates that environmental innovation has played a signifi......The maritime industry is widely seen as less permeable to innovation than other industries. However, the industry is now recognizing that demands for increased environment protection can only be achieved by more innovation.This study demonstrates that environmental innovation has played...

  7. Environmental management the supply chain perspective

    CERN Document Server

    Wong, Christina W Y; Lun, Y H Venus; Cheng, T C E

    2015-01-01

    In view of the increasing quest for environmental management in businesses, this book provides a good reference to firms to understand how they may manage their supply chains to improve business and environmental performance. The book consists of six chapters covering such topics as environmental management, environmental management practices with supply chain efforts, collaborative environmental management, organizational capabilities in environmental management, environmental disclosure, and closed-loop supply chains. The book presents theory-driven discussions on the link between environmental management and business performance in the context of supply chain management. The book will be useful for firms to learn from the research findings and real-life cases to develop plans to implement environmental management practices jointly with supply chain partners.

  8. Explaining environmental management system development: A stakeholder approach

    NARCIS (Netherlands)

    Bremmers, H.J.; Omta, S.W.F.; Haverkamp, D.J.

    2004-01-01

    Managerial changes are necessary for companies in the Dutch food industry and agribusiness to lessen the environmental impact of their activities. To identify the opportunities or limits of environmental management systems (EMSs), it is important to first understand what influence stakeholders have

  9. Managing complexity challenges for industrial engineering and operations management

    CERN Document Server

    López-Paredes, Adolfo; Pérez-Ríos, José

    2014-01-01

    This book presents papers by experts in the field of Industrial Engineering, covering topics in business strategy; modelling and simulation in operations research; logistics and production; service systems; innovation and knowledge; and project management. The focus of operations and production management has evolved from product and manufacturing to the capabilities of firms and collaborative management. Nowadays, Industrial Engineering is concerned with the study of how to design, modify, control and improve the performance of complex systems. It has extended its scope to any physical landscape populated by social agents. This raises a major challenge to Industrial Engineering:  managing complexity. This volume shows how experts are dealing with this challenge.

  10. Environmental management as situated practice

    DEFF Research Database (Denmark)

    Lippert, Ingmar; Krause, Franz; Hartmann, Niklas Klaus

    2015-01-01

    We propose an analysis of environmental management (EM) as work and as practical activity. This approach enables empirical studies of the diverse ways in which professionals, scientists, NGO staffers, and activists achieve the partial manageability of specific “environments”. In this introduction......, we sketch the debates in Human Geography, Management Studies, and Science and Technology Studies to which this special issue contributes. We identify the limits of understanding EM though the framework of ecological modernisation, and show how political ecology and work-place studies provide...... to be assessed, or as simply the implementation of dominant projects and the materialisation of hegemonic discourse. Such a shift renders EM as always messy practices of engagement, critique and improvisation. We conclude that studying the distributed and situated managing agencies, actors and their practices...

  11. ISO 14000 : environmental management systems

    International Nuclear Information System (INIS)

    Boutin, C.; Emard, C.; Lalonde, G.; Levesque, A.; Robitaille, R.; Rollin, A.L.; Thibeault, I.

    1996-01-01

    This book is addressed to the managers, professionals, and government agents which wish to know the philosophy of the step as well as the stages to be followed for the establishment of a system of environmental management in conformity with the standards of the series ISO 14000. This work locates ISO 14000 in the historical context of its development by describing the bonds with other standards in place of which those of the series ISO 9000. This book answers questions that arise regarding a companies step toward accreditation to ISO 14000

  12. Environmental protection and management guidebook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-15

    In British Columbia, oil and gas activities on private or Crown land are subject to regulations in terms of environmental practices. This environmental protection and management guidebook seeks to provide information on the Oil and Gas Activities Act. All sections from the regulation: water, riparian values, wildlife and wildlife habitat, conserving soil, forest health, invasive plants, natural range barriers, seismic lines, areas to be restored and old growth management areas, resource features and cultural heritage resources, are covered in this document. The minimum acceptable operational standards and practices for oil and gas activities in British Columbia are described. This guide is intended to provide clients and stakeholders with recommendations concerning the planning phase, before any permits are applied for, and concerning permissions or authorizations generally for oil and gas activities in British Columbia.

  13. Analysing green supply chain management practices in Brazil's electrical/electronics industry using interpretive structural modelling

    DEFF Research Database (Denmark)

    Govindan, Kannan; Kannan, Devika; Mathiyazhagan, K.

    2013-01-01

    Industries need to adopt the environmental management concepts in the traditional supply chain management. The green supply chain management (GSCM) is an established concept to ensure environment-friendly activities in industry. This paper identifies the relationship of driving and dependence...

  14. Supporting industries energy and environmental profile

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2005-09-21

    As part of its Industries of the Future strategy, the Industrial Technologies Program within the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy works with energy-intensive industries to improve efficiency, reduce waste, and increase productivity. These seven Industries of the Future (IOFs) – aluminum, chemicals, forest products, glass, metal casting, mining, and steel – rely on several other so-called “supporting industries” to supply materials and processes necessary to the products that the IOFs create. The supporting industries, in many cases, also provide great opportunities for realizing energy efficiency gains in IOF processes.

  15. Motivations for Proactive Environmental Management

    OpenAIRE

    Khanna, Madhu; Speir, Cameron

    2013-01-01

    This paper examines the extent to which there are differential incentives that motivate the adoption of environmental management practices (EMPs) and pollution prevention (P2) methods. We analyze the role of internal drivers such as managerial attitudes towards the environment and external pressures using both observed characteristics of facilities and perceived pressures. We estimate a structural equation model using survey data from facilities in Oregon that involves simultaneous estimation...

  16. Life Cycle Based Environmental Approach in the Industry

    DEFF Research Database (Denmark)

    Jørgensen, Tine Herreborg; Thrane, Mikkel

    2002-01-01

    This paper discusses the need for industries to extend the focus from environmental impacts in their own production, towards considerations of impacts and improvement potentials in the whole product chain.......This paper discusses the need for industries to extend the focus from environmental impacts in their own production, towards considerations of impacts and improvement potentials in the whole product chain....

  17. Hanford Site environmental management specification

    International Nuclear Information System (INIS)

    Grygiel, M.L.

    1998-01-01

    The US Department of Energy, Richland Operations Office (RL) uses this Hanford Site Environmental Management Specification (Specification) to document top-level mission requirements and planning assumptions for the prime contractors involved in Hanford Site cleanup and infrastructure activities under the responsibility of the US Department of Energy, Office of Environmental Management. This Specification describes at a top level the activities, facilities, and infrastructure necessary to accomplish the cleanup of the Hanford Site and assigns this scope to Site contractors and their respective projects. This Specification also references the key National Environmental Policy Act of 1969 (NEPA), Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA), and safety documentation necessary to accurately describe the cleanup at a summary level. The information contained in this document reflects RL's application of values, priorities, and critical success factors expressed by those involved with and affected by the Hanford Site project. The prime contractors and their projects develop complete baselines and work plans to implement this Specification. These lower-level documents and the data that support them, together with this Specification, represent the full set of requirements applicable to the contractors and their projects. Figure 1-1 shows the relationship of this Specification to the other basic Site documents. Similarly, the documents, orders, and laws referenced in this specification represent only the most salient sources of requirements. Current and contractual reference data contain a complete set of source documents

  18. Hanford Site environmental management specification

    Energy Technology Data Exchange (ETDEWEB)

    Grygiel, M.L.

    1998-06-10

    The US Department of Energy, Richland Operations Office (RL) uses this Hanford Site Environmental Management Specification (Specification) to document top-level mission requirements and planning assumptions for the prime contractors involved in Hanford Site cleanup and infrastructure activities under the responsibility of the US Department of Energy, Office of Environmental Management. This Specification describes at a top level the activities, facilities, and infrastructure necessary to accomplish the cleanup of the Hanford Site and assigns this scope to Site contractors and their respective projects. This Specification also references the key National Environmental Policy Act of 1969 (NEPA), Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA), and safety documentation necessary to accurately describe the cleanup at a summary level. The information contained in this document reflects RL`s application of values, priorities, and critical success factors expressed by those involved with and affected by the Hanford Site project. The prime contractors and their projects develop complete baselines and work plans to implement this Specification. These lower-level documents and the data that support them, together with this Specification, represent the full set of requirements applicable to the contractors and their projects. Figure 1-1 shows the relationship of this Specification to the other basic Site documents. Similarly, the documents, orders, and laws referenced in this specification represent only the most salient sources of requirements. Current and contractual reference data contain a complete set of source documents.

  19. Environmental Land Management in Tajikistan

    Science.gov (United States)

    Makhmudov, Zafar; Ergashev, Murod

    2015-04-01

    Tackling Environmental Land Management in Tajikistan "Project approach" Khayrullo Ibodzoda, Zafar Mahmoudov, Murod Ergashev, Kamoliddin Abdulloev Among 28 countries in Europe and Central Asia, Tajikistan is estimated to be the most vulnerable to the climate change impacts depending on its high exposure and sensitivity combined with a very low adaptive capacity. The agricultural sector of Tajikistan is subject to lower and more erratic rainfalls, as well as dryness of water resources due to the possible temperature rising in the region, high evaporation, reducing the accumulation of snow in the mountain glaciers and increased frequency of extreme events. Climate change and variability are likely to pose certain risks, especially for those who prefer natural agriculture or pasture management that just reinforces the need for sound, adapted to new climatic conditions and improved principles of land management. Adoption of new strategies and best practices on sustainable land and water management for agricultural ecosystems will help the farmers and communities in addressing the abovementioned problems, adapt and become more resilient to changing climate by increasing wellbeing of local population, and contributing to food security and restoring productive natural resources. The Environmental Land Management and Rural Livelihoods Project is being financed by the Pilot Program for Climate Resilience (PPCR) and Global Environment Facility (GEF). The Project goal is to enable the rural population to increase their productive assets by improving management of natural resources and building resilience to climate change in selected climate vulnerable sites. The project will facilitate introduction of innovative measures on land use and agricultural production by providing small grants at the village level and grants for the Pasture User Groups (PUGs) at jamoat level in order to implement joint plans of pasture management and wellbred livestock, also for the Water User

  20. EEE (environmental engineering economics) attributes for oil and gas industry

    International Nuclear Information System (INIS)

    Isreb, M.

    2006-01-01

    This paper outlined the basic attributes of environmental engineering economics (EEE) with reference to the oil and gas industry in Australia. The paper was designed as a reference guide for policy-makers, educators, and environmental engineers. Methods of calculating the Pareto Optimum status were discussed, and environmental values and principles were identified. Air quality indicators were outlined. The paper considered multidisciplinary approaches to EEE and sustainable development, as well as the application of statistics and qualitative methods in addressing contemporary issues. The ethical aspects of environmental policies were discussed. Issues related to environmental toxicity and public health were also examined. Various taxation approaches and financial incentives were reviewed. Environmental laws related to the oil and gas industry were outlined. Environmental assessment procedures were presented. It was concluded that environmental regulations within the industry will help to ensure appropriate pollution reductions. 7 refs

  1. Environmental development plan. LWR commercial waste management

    International Nuclear Information System (INIS)

    1980-08-01

    This Environmental Development Plan (EDP) identifies the planning and managerial requirements and schedules needed to evaluate and assess the environmental, health and safety (EH and S) aspects of the Commercial Waste Management Program (CWM). Environment is defined in its broadest sense to include environmental, health (occupational and public), safety, socioeconomic, legal and institutional aspects. This plan addresses certain present and potential Federal responsibilities for the storage, treatment, transfer and disposal of radioactive waste materials produced by the nuclear power industry. The handling and disposal of LWR spent fuel and processed high-level waste (in the event reprocessing occurs) are included in this plan. Defense waste management activities, which are addressed in detail in a separate EDP, are considered only to the extent that such activities are common to the commercial waste management program. This EDP addresses three principal elements associated with the disposal of radioactive waste materials from the commercial nuclear power industry, namely Terminal Isolation Research and Development, Spent Fuel Storage and Waste Treatment Technology. The major specific concerns and requirements addressed are assurance that (1) radioactivity will be contained during waste transport, interim storage or while the waste is considered as retrievable from a repository facility, (2) the interim storage facilities will adequately isolate the radioactive material from the biosphere, (3) the terminal isolation facility will isolate the wastes from the biosphere over a time period allowing the radioactivity to decay to innocuous levels, (4) the terminal isolation mode for the waste will abbreviate the need for surveillance and institutional control by future generations, and (5) the public will accept the basic waste management strategy and geographical sites when needed

  2. Environmental impact of the nuclear industry in China

    International Nuclear Information System (INIS)

    Pan Ziqiang; Wang Zhibo; Chen Zhuzhou; Zhang Yongxing; Xie Jianlun

    1996-01-01

    Since its foundation in 1955, the nuclear industry has become a comprehensive industrial, scientific and technical system in China. The nuclear industry has obviously brought great profit to the country, but how much environmental effect it has caused is a question of common interest which we should answer. This report shows the environmental assessment of the nuclear fuel cycle in China. (author). 4 refs, 1 fig., 22 tabs

  3. Managing risks and hazardous in industrial operations

    Energy Technology Data Exchange (ETDEWEB)

    Almaula, S.C. [Woodward-Clyde International, Oakland, CA (United States)

    1996-12-31

    The main objective of this paper is to demonstrate that it makes good business sense to identify risks and hazards of an operation and take appropriate steps to manage them effectively. Developing and implementing an effective risk and hazard management plan also contibutes to other industry requirements and standards. Development of a risk management system, key elements of a risk management plan, and hazards and risk analysis methods are outlined. Comparing potential risk to the cost of prevention is also discussed. It is estimated that the cost of developing and preparing the first risk management plan varies between $50,000 to $200,000. 3 refs., 2 figs., 1 tab.

  4. Hanford Environmental Information System Configuration Management Plan

    International Nuclear Information System (INIS)

    1996-06-01

    The Hanford Environmental Information System (HEIS) Configuration Management Plan establishes the software and data configuration control requirements for the HEIS and project-related databases maintained within the Environmental Restoration Contractor's data management department

  5. Assessment of the implementation of environmental management ...

    African Journals Online (AJOL)

    Assessment of the implementation of environmental management system in the construction ... Journal of Fundamental and Applied Sciences ... The Environmental Management System (EMS) illustrates a possible solution to reduce the ...

  6. Ethiopian Journal of Environmental Studies and Management ...

    African Journals Online (AJOL)

    Ethiopian Journal of Environmental Studies and Management: About this journal. Journal Home > Ethiopian Journal of Environmental Studies and Management: About this journal. Log in or Register to get access to full text downloads.

  7. MDOT Materials Laboratories : Environmental Management Plan

    Science.gov (United States)

    2012-06-01

    The goal of this EMP was to develop and implement a comprehensive Environmental : Management Plan for MDOT Materials Laboratories. This goal was achieved through : perfonnance of environmental audits to identify potential environmental impacts, and b...

  8. Potential environmental effects of energy conservation measures in northwest industries

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M C; Gygi, K F; Hendrickson, P L

    1992-01-01

    The Bonneville Power Administration (Bonneville) has identified 101 plants in the Pacific Northwest that account for 80% of the region's industrial electricity consumption. These plants offer a precise target for a conservation program. PNL determined that most of these 101 plants were represented by 11 major industries. We then reviewed 36 major conservation technologies used in these 11 industrial settings to determine their potential environmental impacts. Energy efficiency technologies designed for industrial use may result in direct or indirect environmental impacts. Effects may result from the production of the conservation measure technology, changes in the working environment due to different energy and material requirements, or changes to waste streams. Industry type, work-place conditions, worker training, and environmental conditions inside and outside the plant are all key variables that may affect environmental outcomes. To address these issues this report has three objectives: Describe potential conservation measures that Bonneville may employ in industrial programs and discuss potential primary impacts. Characterize industrial systems and processes where the measure may be employed and describe general environmental issues associated with each industry type. Review environmental permitting, licensing, and other regulatory actions required for industries and summarize the type of information available from these sources for further analysis.

  9. Industrial water demand management and cleaner production ...

    African Journals Online (AJOL)

    Processes and systems using water today are being subjected to increasingly stringent environmental regulations on effluents and there is growing demand for fresh water. In Morocco, consumption of water by industries is estimated in 1994 at 1 billion m3, the drinking water constitutes 4%. Water used in the food and drink ...

  10. Environmental Management System ISO 14001

    CERN Document Server

    Haider, Syed

    2010-01-01

    This is a must-have tool for any company in the process of adopting and incorporating the ISO 14001:2004 requirements, this book and accompanying CD-ROM provides the latest updates and amendments and translates the ISO language into actionable strategy. Offering administrative solutions to managers of all sorts, it includes practical examples of policies with objectives, targets, and action plans applicable to any process related industry or an ordinary organization. With template formats and hands-on flow charts to describe step-by-step system development, documentation, and implementation ph

  11. 75 FR 51026 - Environmental Management Advisory Board

    Science.gov (United States)

    2010-08-18

    ... DEPARTMENT OF ENERGY Environmental Management Advisory Board AGENCY: Department of Energy. ACTION: Notice of open meeting. SUMMARY: This notice announces a meeting of the Environmental Management Advisory... EMAB is to provide the Assistant Secretary for Environmental Management (EM) with advice and...

  12. Analysis of DOE international environmental management activities

    Energy Technology Data Exchange (ETDEWEB)

    Ragaini, R.C.

    1995-09-01

    The Department of Energy`s (DOE) Strategic Plan (April 1994) states that DOE`s long-term vision includes world leadership in environmental restoration and waste management activities. The activities of the DOE Office of Environmental Management (EM) can play a key role in DOE`s goals of maintaining U.S. global competitiveness and ensuring the continuation of a world class science and technology community. DOE`s interest in attaining these goals stems partly from its participation in organizations like the Trade Policy Coordinating Committee (TPCC), with its National Environmental Export Promotion Strategy, which seeks to strengthen U.S. competitiveness and the building of public-private partnerships as part of U.S. industrial policy. The International Interactions Field Office task will build a communication network which will facilitate the efficient and effective communication between DOE Headquarters, Field Offices, and contractors. Under this network, Headquarters will provide the Field Offices with information on the Administration`s policies and activities (such as the DOE Strategic Plan), interagency activities, as well as relevant information from other field offices. Lawrence Livermore National Laboratory (LLNL) will, in turn, provide Headquarters with information on various international activities which, when appropriate, will be included in reports to groups like the TPCC and the EM Focus Areas. This task provides for the collection, review, and analysis of information on the more significant international environmental restoration and waste management initiatives and activities which have been used or are being considered at LLNL. Information gathering will focus on efforts and accomplishments in meeting the challenges of providing timely and cost effective cleanup of its environmentally damaged sites and facilities, especially through international technical exchanges and/or the implementation of foreign-development technologies.

  13. Industrial Ecology (IE) Revisited: Beyond Environmental Myopia

    DEFF Research Database (Denmark)

    Bojsen, Inger; Ulhøi, John Parm

    Since the late 1980s, the notion of industrial ecology has attracted increasing attention amoung researchers, most notably in the US and northern Europe. However, this is not yet translated into any significant political or practical awareness in the industrial community. There are several reasons...

  14. Environmental regulatory reform in Poland: lessons for industrializing economies

    Energy Technology Data Exchange (ETDEWEB)

    Brown, H.S.; Angel, D. [Clark University, Worcester, MA (USA). George Perkins Marsh Institute

    2000-09-01

    This paper examines the environmental regulatory reform in Poland during the 1990s and uses the findings to consider the extent to which elements of successful regulatory systems are transferable across national boundaries. Drawing on five case studies of privatized firms, a mailed questionnaire, and policy and institutional analysis, it investigates how Poland developed an effective system for managing industrial pollution while also achieving considerable socioeconomic progress. The fundamental legitimacy of the regulators and regulatory process, the availability of information about firms and regulatory intents, and the capacity for case-specific decision-making are among the key explanatory factors. The study also shows how in Poland a good 'fit' between regulatory institutions and policies on one hand and their social context on the other hand has evolved, and how it contributes to the effectiveness of the regulatory system. Industrializing economies can indeed simultaneously pursue environmental protection and socioeconomic welfare, but elements of a proven regulatory system cannot be automatically adopted among countries and cultures. Learning from each other's experience must be sensitive to the cultural and institutional context of each regulatory system. 42 refs., 3 figs., 1 tab.

  15. Above the fray in environmental management

    International Nuclear Information System (INIS)

    Mullin, R.

    1993-01-01

    Despite a generally disappointing performance in the environmental management sector last year, companies in the water treatment business are still held in high regard by Wall Street. The $2.9-billion US market grew 8% last year, and a 6%-8% advance is forecast for the next few years, although discretionary environmental management projects are expected to lag the recovery. Growth is driven largely by the sheer volume of water used in the US-42.3 billion gal/day or 168 gal/day, per capita, with heavy industries using up to 1,000 gal/minute-and the proliferation of regulations affecting water treatment. Recent regulations include the Safe Water Drinking Act, the Resource Conservation and Recovery Act ban on landfilling hazardous wastes, and the ban on ocean dumping of municipal waste. The Clean Water Act of 1987 is scheduled to be reauthorized this year, but final rulings are not expected until mid-1994. Among the probable new rules are control and treatment of municipal and farm storm waters and runoff, treatment of contaminated sediments, toxics use reduction targets, a nationwide (rather than state-by-state) ban on phosphate detergents, nationwide standardization of water quality criteria, and further protection for wetlands. From water supply through processing, power generation, and eventual discharge, water treatment firms are now positioning themselves as environmental leaders, stewards who can lead industry into an environmentally correct future. Despite some differences in organization, basic strategies seem to be the same among top firms, where the trend is to meld all customers' needs into a single program of analysis, design, delivery, and monitoring

  16. Environmental Management Systems and Sustainability in SMEs

    Directory of Open Access Journals (Sweden)

    Shah Satya

    2016-01-01

    Full Text Available Environmental sustainability in manufacturing sector has been allocated a major consideration in the international literature. Due to growing concerns over the high effect of SMEs on world manufacturing industries and their contribution to pollution; this research attempts to focus on the key parameters that interact in the application of environmental management system, taking into account the main features of SMEs and also the integral role of industrial entrepreneurs in inspiring their firms’ approaches. The paper explores the potential opportunities which enable these enterprises to move towards organizations with high level of responsibility regarding environmental protection in order to provide a healthier life for future generations. Case investigation is carried out on an adhesive manufacturing company, which covers a notable market share within the sector. The research identifies that the company requires developing both internal and external entities within an explicit plan to revolutionize the recruitment patterns. Given the lack of adequate studies in adhesive technology, more researches are recommended in the future to consider the sustainable innovations on a broader sample of adhesive manufacturing companies to perform the life-cycle analysis due to the harmful organic compounds and toxic vapours of the adhesive products.

  17. Environmental assessment in the uranium industry

    International Nuclear Information System (INIS)

    Frost, S.E.

    2000-01-01

    The paper examines the subject matter to be dealt with in environmental impact assessments for uranium production facilities, the development of environmental impact statements and the processes used for assessing projects. Different types of regulatory process used to assess projects are described, using Canadian and Australian examples. Some of the techniques used in developing environmental assessments are described. Public participation, including that of special interest groups, is discussed. Some examples of assessments are examined, particularly looking at recent assessments for uranium mining projects in Canada. Trends in environmental assessment are described, using examples from a number of different projects over the past 25 years. Some recommendations for the future are offered. (author)

  18. Environmental assessment in the uranium industry

    International Nuclear Information System (INIS)

    Frost, S.E.

    2002-01-01

    The paper examines the subject matter to be dealt with in environmental impact assessments for uranium production facilities, the development of environmental impact statements and the processes used for assessing projects. Different types of regulatory process used to assess projects are described, using Canadian and Australian examples. Some of the techniques used in developing environmental assessments are described. Public participation, including that of special interest groups, is discussed. Some examples of assessments are examined, particularly looking at recent assessments for uranium mining projects in Canada. Trends in environmental assessment are described, using examples from a number of different projects over the past 25 years. Some recommendations for the future are offered. (author)

  19. Managing Security Risks in an Industrial Investment – Analysis Directions

    Directory of Open Access Journals (Sweden)

    Stefan Dragomir

    2016-05-01

    Full Text Available This paper achieved an analysis of some important management strategies for an investment, in correlation with index of global pollution. Environmental security assessment shall be determined taking into account the workplace security and effects on health, safety of workers in an industry investment. It is necessary to observe and collect a larger number of data generated by the development of an industrial process, so as to make a deep analysis on global pollution index and how it is affected industrial investment environment. This research shows how can the substances that infest the environment to produce much damage and influence the environmental factors (air, water, soil, landscape, fauna and flora. When we know the risks that characterize the plant equipment, we can protect the life and we can protect the environment for a sustainable development in the future.

  20. Corporate environmental responsiveness strategies and competitiveness in the North American oil and gas industry

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, S.

    1996-12-31

    An exploratory study was conducted in the Canadian oil and gas industries to build a perspective on the environmental responsive strategies employed by the industry. Based on this study and a detailed review of the literature, hypotheses were formulated regarding organizational determinants of environmental responsiveness strategies and the impact of these strategies on firm performance. The hypotheses were tested through a questionnaire-based comparative survey of multiple informants in the Canadian and U.S. oil and gas industries. Results revealed that environmental responsiveness was influenced by management interpretation of environmental issues as threats or opportunities. Other significant factors noted were company size and resources, and collaborative problem-solving relationships with stockholders seen as spokespersons for the natural environment. Managerial interpretations of environmental issues appeared to be affected by leadership styles, organization design factors such as managerial discretion in decisions on the business/ natural environment interface, and the use of environmental performance indicators in employee control systems. refs., figs.

  1. Corporate environmental responsiveness strategies and competitiveness in the North American oil and gas industry

    International Nuclear Information System (INIS)

    Sharma, S.

    1996-01-01

    An exploratory study was conducted in the Canadian oil and gas industries to build a perspective on the environmental responsive strategies employed by the industry. Based on this study and a detailed review of the literature, hypotheses were formulated regarding organizational determinants of environmental responsiveness strategies and the impact of these strategies on firm performance. The hypotheses were tested through a questionnaire-based comparative survey of multiple informants in the Canadian and U.S. oil and gas industries. Results revealed that environmental responsiveness was influenced by management interpretation of environmental issues as threats or opportunities. Other significant factors noted were company size and resources, and collaborative problem-solving relationships with stockholders seen as spokespersons for the natural environment. Managerial interpretations of environmental issues appeared to be affected by leadership styles, organization design factors such as managerial discretion in decisions on the business/ natural environment interface, and the use of environmental performance indicators in employee control systems. refs., figs

  2. SOCIAL AND ENVIRONMENTAL IMPACTS OF THE SUGARCANE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Luciana Oranges Cezarino

    2012-06-01

    Full Text Available Currently, the concern about the environmental degradation and the conditions of life of our planet has increased. An alarm literally sounded relating the environmental problems and the uncertainties of the future. An energy revolution is necessary in face of the climate changes. Nature offers numerous possibilities of energy production and Brazil is in a great position in this scenario. It is the greatest producer, consumer and exporter of ethanol. Analyzing the Brazilian sugarcane industry, it is easy to recognize its historical and economic importance. More than ever, this industry has shown environmental solutions with changes in the energy matrix using ethanol as renewable fuel. It is essential to have the industry development in balance with social and environmental values. Thus, the first step to expand this sector would be to identify the social and environmental impacts of the sugarcane industry. Public policies are also acting on the sector and have a prominent role in the scenario.

  3. Barriers to green supply chain management in the automotive industry

    Directory of Open Access Journals (Sweden)

    Flávia Cristina da Silva

    2018-04-01

    Full Text Available This study identified the barriers to and analyzed their degree of influence on Green Supply Chain Management (GSCM from the perspective of a first tier supplier in the Brazilian automotive industry. There are 43 barriers in the literature of which 13 were validated: support and involvement (five, operational performance (three, economic performance (two, environmental performance (two, and knowledge and information (one. The validation occurred through the perception of technical and academic specialists familiar with environmental management and supply chains in several sectors. The hierarchy of barriers priorities was obtained through the application of the Analytic Hierarchy Process (AHP, with decision makers representing an industry in the automotive sector. The research showed that the cost implications represent the most influential barrier to GCSV, from the perspective of a first tier supplier in the sector.

  4. Barriers to green supply chain management in Indian mining industries

    DEFF Research Database (Denmark)

    Muduli, K.; Govindan, Kannan; Barve, A.

    2013-01-01

    industries are increasingly implementing environmental management systems (EMS), cleaner production (CP), and adopting green supply chain management (GSCM) practices. GSCM focuses on a reduction of the adverse impacts of supply chain activities as well as a minimization of energy and material usage......A country's mining industry, despite its significant contributions to the country's economic growth, generally has a very poor public image because it is considered as a major environmental polluter. To acquire an improved social image, as well as to comply with government regulations, mining...... strength of the barriers will help decision makers rank them and decide a course of action that will make an optimum utilization of available resources during times of resource scarcity....

  5. Strategic Stakeholder Communication and Co-operation in Environmental Management

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    2002-01-01

    in this process is strategic stakeholder relationships like communication and co-operation. The paper addresses this topic based on a proposed approach for identifying and evaluating the influence from various groups of stakeholders as well as the findings from recent surveys of environmental management......Ever since the introduction of the first major Danish environmental protection law in 1974, environmental regulation has been instrumental in pushing industry towards adopting environmentally less harmful behaviour. However, since the early 1990s, pressure from a growing number of other...... stakeholders, such as for example customers, NGO's, neighbours, etc., has increasingly driven industry towards incorporating environmental considerations in their decisions and activities to an extent which justifies placing Danish companies at the cutting edge of industrial greening. An essential element...

  6. THE KEY ACTIVITIES OF GREEN LOGISTICS MANAGEMENT IN THE THAI AUTOMOTIVE INDUSTRY

    OpenAIRE

    Thanyaphat Muangpan; Mana Chaowarat; Jutaporn Neamvonk

    2016-01-01

    Thai automotive industry needs to be developed for understanding activities management on inbound logistics that is an essential element of business operations for a manufacturing firm. The purpose of research is to study the main activities of green logistics management (inbound logistics) in the Thai automotive industry. Survey research was used in this study to collect data by sampling from the people in the field of logistics and environmental management of Thai automotive industry to exa...

  7. Analysis of Information Sharing Mechanism in the Food Industry Green Supply Chain Management and Operation Process

    OpenAIRE

    Liu, Ye-ming; Yin, Fang-fang; Fu, Xian-zhi

    2011-01-01

    In order to effectively address the issues of environmental pollution and food safety in food industry, the green supply chain management should be used in the food industry. However, information sharing is the basis of supply chain management. For this purpose, on the basis of describing the connotation of food industry green supply chain management, the paper introduces the contents and the effects of information sharing mode in detail. It focuses on the barriers of the implementation of in...

  8. Strategic environmental assessment: Integrated environmental management

    CSIR Research Space (South Africa)

    Audouin, M

    2004-01-01

    Full Text Available This document has been written for a wide audience. Its objective is to serve as an initial reference text. The aim is to provide an introductory information source to government authorities, environmental practitioners, nongovernmental...

  9. Environmental strategies in the automobile industry; Umweltstrategien in der Automobilbranche

    Energy Technology Data Exchange (ETDEWEB)

    Bratzel, S.; Tellermann, R. [Center of Automotive, FHDW, Bergisch Gladbach (Germany)

    2007-12-15

    An actual market analysis on the environment strategies of the automobile industry concludes that the large companies react preferential with marketing measures to the climatic change debate and do not consequently support innovative environmental technology developments. The study show that the companies BMW, Toyota, and Volkswagen have the best environmental stategies, Daimler, Ford, Honda Porsche, Peugeot, Citroen show fragments of an environmental strategey, Chrysler, General Motors, Fiat, Mitsubishi and Nissan/Renault invest in marketing strategies, but not in environmental strategies.

  10. Total quality management in hotel industry

    OpenAIRE

    Mitreva, Elizabeta; Saneva, Dusica; Miteva, Natasa

    2017-01-01

    Total quality management (TQM) is a systematic management approach aiming at continuous increase of the value offered to consumers through improvement of service quality. In hotel industry, success is achieved through service quality, which stands as a key factor for sustainability in the twenty-first century. Nowadays, quality is the basic factor for survival on the market, better competition, and greater profitability. TQM is a process that starts and ends with the consumer. The aim of this...

  11. TOTAL QUALITY MANAGEMENT AND CONTEMPORARY HOTEL INDUSTRY

    OpenAIRE

    Ivica Batinić

    2013-01-01

    Strong competition in the market has caused the development of a new management approach known as Total Quality Management (TQM). Due to importance that quality plays in achieving competitive advantage, the hotel industry started to apply TQM. During the introduction of these systems, hotel companies may use different approaches to suit their own buseiness requirements. In doing so, 'TQM standards' can be used, or various international standards and models of business ...

  12. Environmental Management Systems (EMS Adoption in Sarawak (Malaysia: Implementation Motivations

    Directory of Open Access Journals (Sweden)

    Lee Lee Ho

    2017-09-01

    Full Text Available Environmental management has been in the process of evolution since Industrial Revolutions of 18th and 19th centuries. And the more recent is the development of international environmental management standards and guidelines to facilitate global trade. These environmental management standards and guidelines are usually known as Environmental Management Systems (EMS. This research investigates the implementation motivations in relation to EMS adoption in Sarawak, Malaysia organizations. Empirical findings of a survey on the above in Sarawak organizations are presented. About 112 survey questionnaires invitations were forwarded to various organizations in Sarawak and a total of 47 responses were received. The results of this research show that among the Sarawak organizations, the top three implementation motivations or benefits from implementing EMS according to their importance by the Sarawak EMS user’s organizations are 1 Legal compliance as the top benefit of EMS implementation; 2 Improvement in operational environmental protection; and 3 Corporate image advantages.

  13. Environmental Management in Danish transnational textile product chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Jørgensen, Ulrik; Hendriksen, Kåre

    2010-01-01

    on capacity building at the suppliers in developing countries, while other companies seem to focus the complex activities at domestic suppliers. Two new facilitating actors in environmental management in product chains were identified. Research limitations and implications The focus on one sector in one......Purpose The purpose is to analyse environmental responsibility of companies from industrialized countries when they source materials and products in countries with less environmental protection. Methodology The article is a study of corporate environmental management in the Danish textile...... have a practice without environmental initiatives. Dominating types of initiatives are cleaner technology, environmental management systems and cleaner products. Driving forces are governmental regulation, customer demands, market expectations and protection of corporate brands. Some companies focus...

  14. Environmental aspects of commercial radioactive waste management

    International Nuclear Information System (INIS)

    1979-05-01

    Volume 2 contains chapters 6 through 10: environmental effects related to radioactive waste management associated with LWR fuel reprocessing - mixed-oxide fuel fabrication plant; environmental effects related to transporting radioactive wastes associated with LWR fuel reprocessing and fabrication; environmental effects related to radioactive waste management associated with LWR fuel reprocessing - retrievable waste storage facility; environmental effects related to geologic isolation of LWR fuel reprocessing wastes; and integrated systems for commercial radioactive waste management

  15. Improving the environmental performance of biofuels with industrial symbiosis

    International Nuclear Information System (INIS)

    Martin, Michael; Eklund, Mats

    2011-01-01

    In the production of biofuels for transport many critics have argued about the poor energy efficiency and environmental performance of the production industries. Optimism is thus set on the production of second generation biofuels, while first generation biofuels continue to dominate worldwide. Therefore it is interesting to consider how the environmental performance of first generation biofuel industries can be improved. The field of industrial symbiosis offers many possibilities for potential improvements in the biofuel industry and theories from this research field are used in this paper to highlight how environmental performance improvements can be accomplished. This comes in the form of by-product synergies and utility synergies which can improve material and energy handling. Furthermore, the processes and products can gain increased environmental performance improvements by the adaption of a renewable energy system which will act as a utility provider for many industries in a symbiotic network. By-products may thereafter be upcycled through biogas production processes to generate both energy and a bio-fertilizer. A case study of an actual biofuel industrial symbiosis is also reviewed to provide support for these theories. -- Highlights: → By-product and utility synergies may improve the production processes of biofuel industries for reduced energy consumption and improved environmental performance. → Upcycling tenants can make use of wastes to upgrade waste to a valuable product and/or energy source. → Energy systems for biofuel production have a large influence on the performance of biofuel industries.

  16. Effective executive management in the pharmaceutical industry.

    Science.gov (United States)

    Tran, Hoang; Kleiner, Brian H

    2005-01-01

    Along with the boom in information technology and vast development in genomic and proteomic discoveries, the pharmaceutical and biotech industries have been provided the means and tools to create a new page in medicinal history. They are now able to alter the classic ways to cure complex diseases thanks to the completion of the human genome project. To be able to compete in this industry, pharmaceutical management has to be effective not only internally but also externally in socially acceptable conduct. The first department that requires focus is marketing and sales. As the main driving force to increase revenues and profits, marketing and sales employees should be highly motivated by compensation. Also, customer relationships should be maintained for long-term gain. As important as marketing, research and development requires the financial support as well as the critical decision making to further expand the product pipeline. Similarly, finance and technologies should be adequately monitored and invested to provide support as well as prepare for future expansion. On top of that, manufacturing processes and operations are operated per quality systems and FDA guidelines to ensure high quality. Human Resources, on the other hand, should carry the managing and motivation from upper management through systematic recruitment, adequate training, and fair compensation. Moreover, effective management in a pharmaceutical would also require the social welfare and charity to help patients who cannot afford the treatment as well as improving the organization's image. Last but not least, the management should also prepare for the globalization of the industry. Inevitably, large pharmaceutical companies are merging with each other or acquiring smaller companies to enhance the competitive advantages as well as expand their product mix. For effectiveness in a pharmaceutical industry, management should focus more than just the daily routine tasks and short-term goals. Rather, they

  17. ENVIRONMENTAL EDUCATION AND TRAINING IN INDUSTRY ...

    African Journals Online (AJOL)

    strategies, and notes that new orientations to environmental education and training are more likely to sup- port a re-orientation .... were all interested in exploring the role of educa- tion and ..... dardised global procedures for corporate environ-.

  18. Environmental indicators for industrial optimization and design

    NARCIS (Netherlands)

    Konneman, Bram

    2008-01-01

    Companies use standard financial indicators to determine their business success and optimize their business opportunities. However, sustainable development demands for an integrated approach to economic, environmental and social indicators. Although a lot of indicator initiatives are under

  19. Environmental Pollution: Sanitary Engineering and Industrial Waste.

    Science.gov (United States)

    1977-07-01

    and closed ecological systems which may prove beneficial to ongoing research and operations for controlling environmental pollution . Corporate Author-Monitoring Agency, Subject, Title and Personal Author are provided. (Author)

  20. INTRODUCTION TO MANAGEMENT FOR INDUSTRIAL SUPERVISORS.

    Science.gov (United States)

    Louisiana State Vocational Curriculum Development and Research Center, Natchitoches.

    SUBJECT MATTER AND SUPPLEMENTAL MATERIALS FOR USE IN CONDUCTING A 10-HOUR INDUSTRIAL SUPERVISORY TRAINING CONFERENCE IN BASIC MANAGEMENT FUNDAMENTALS AND CONCEPTS ARE PRESENTED IN THIS TEACHER GUIDE. IT WAS DEVELOPED BY A STATE COMMITTEE AS A FIRST COURSE IN A SERIES FOR SUPERVISORY PERSONNEL WHO HAVE HAD LITTLE OR NO PREVIOUS SUPERVISORY TRAINING…

  1. Essays in industrial organization and management strategy

    NARCIS (Netherlands)

    de Bijl, P.W.J.

    1996-01-01

    This thesis contains five essays in the theory of industrial organization and management strategy. An introduction makes the main ideas accessible to non-specialists by presenting the essays as fictitious cases. The first essay investigates strategic disclosure of verifiable information. The

  2. UW-Stout's Bachelor's in Industrial Management

    Science.gov (United States)

    Dittmann, Wendy

    2008-01-01

    The Bachelor of Science in Industrial Management (BSIM) was designed for technical college graduates with work experience because the University of Wisconsin-Stout (UW-Stout) recognized a need among adult students with technical college degrees. The program was developed to provide these students with an opportunity to earn baccalaureate degrees…

  3. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: EXEL INDUSTRIAL AIRMIX SPRAY GUN

    Science.gov (United States)

    The Environmental Technology Verification Program has partnered with Concurrent Technologies Corp. to verify innovative coatings and coating equipment technologies for reducing air emissions. This report describes the performance of EXEL Industrial's Kremlin Airmix high transfer ...

  4. Microbial keratinases: industrial enzymes with waste management potential.

    Science.gov (United States)

    Verma, Amit; Singh, Hukum; Anwar, Shahbaz; Chattopadhyay, Anirudha; Tiwari, Kapil K; Kaur, Surinder; Dhilon, Gurpreet Singh

    2017-06-01

    Proteases are ubiquitous enzymes that occur in various biological systems ranging from microorganisms to higher organisms. Microbial proteases are largely utilized in various established industrial processes. Despite their numerous industrial applications, they are not efficient in hydrolysis of recalcitrant, protein-rich keratinous wastes which result in environmental pollution and health hazards. This paved the way for the search of keratinolytic microorganisms having the ability to hydrolyze "hard to degrade" keratinous wastes. This new class of proteases is known as "keratinases". Due to their specificity, keratinases have an advantage over normal proteases and have replaced them in many industrial applications, such as nematicidal agents, nitrogenous fertilizer production from keratinous waste, animal feed and biofuel production. Keratinases have also replaced the normal proteases in the leather industry and detergent additive application due to their better performance. They have also been proved efficient in prion protein degradation. Above all, one of the major hurdles of enzyme industrial applications (cost effective production) can be achieved by using keratinous waste biomass, such as chicken feathers and hairs as fermentation substrate. Use of these low cost waste materials serves dual purposes: to reduce the fermentation cost for enzyme production as well as reducing the environmental waste load. The advent of keratinases has given new direction for waste management with industrial applications giving rise to green technology for sustainable development.

  5. The role of environmental tax incentives to promote innovation and improve the management of groundwater: a case study analysis of the unconventional natural gas industry in Alberta

    OpenAIRE

    Jarvie, Deborah Lynn

    2017-01-01

    Water accounts for more than seventy percent of the earth’s surface, yet less than three percent of this water is freshwater fit for human use, and of this three percent, less than one percent is readily accessible – most of which is ‘groundwater’. This thesis argues that regulation for the protection of groundwater is long overdue for renewal. Examining the literature and conducting a case study, it assesses whether the greater use of tax incentives (TIs) to encourage environmental te...

  6. Implementing Environmental Management Accounting: Status and Challenges

    DEFF Research Database (Denmark)

    Cost Accounting - and its Interaction with Eco-Efficiency Performance Measurement and Indicators; Stefan Schaltegger and Marcus Wagner. 4. Environmental Accounting Dimensions: Pros and Cons of Trajectory Convergence and Increased Efficiency; Pontus Cerin and Staffan Laestadius. 5. Process and Content......Table of contents Preface. 1. Environmental Management Accounting: Innovation or Managerial Fad?; Pall Rikhardsson, Martin Bennett, Jan Jaap Bouma and Stefan Schaltegger. Section 1 Progress. 2. Challenges for Environmental Management Accounting; Roger L. Burritt 3. Current Trends in Environmental......: Visualizing the Policy Challenges of Environmental Management Accounting; Dick Osborn. Section 2 Exploring EMA implementation issues. 6. Environmental Performance and the Quality of Corporate Environmental Reports: The Role of Environmental Management Accounting; Marcus Wagner. 7. Environmental Risk...

  7. Environmental restoration and waste management

    International Nuclear Information System (INIS)

    Middleman, L.I.

    1989-01-01

    The purpose of this Five-Year Plan is to establish an agenda for compliance and cleanup against which progress will be measured. DOE is committed to an open and participatory process for developing a national priority system for expenditure of funds. This system will be based on scientific principles and risk reduction in terms that are understandable to the public. The Plan will be revised annually, with a five-year planning horizon. For FY 1991--1995, this Plan encompasses total program activities and costs for DOE Corrective Activities, Environmental Restoration, Waste Management Operations, and Applied R ampersand D. It addresses hazardous wastes, radioactive wastes, mixed wastes (radioactive and hazardous), and sanitary wastes. It also addresses facilities and sites contaminated with or used in the management of those wastes. The Plan does not include the Safety and Health Program (Office of the Assistant Secretary for Environment, Safety, and Health) or programs of the Office of Civilian Radioactive Waste Management. It does include the annual Defense Programs contribution to the Nuclear Waste Fund for disposal of defense high-level waste and research toward characterizing the defense waste form for repository disposal

  8. Hanford Site Environmental Management Specification

    International Nuclear Information System (INIS)

    DAILY, J.L.

    2001-01-01

    The US Department of Energy, Richland Operations Office (RL) has established a document hierarchy as part of its integrated management system. The Strategic Plan defines the vision, values, missions, strategic goals, high-level outcomes, and the basic strategies in achieving those outcomes. As shown in Figure 1-1, the Site Specification derives requirements from the Strategic Plan and documents the top-level mission technical requirements for the work involved in the RL Hanford Site cleanup and infrastructure activities under the responsibility of the U.S. Department of Energy, Office of Environmental Management (EM). It also provides the basis for all contract technical requirements. Since this is limited to the EM work, neither the Fast Flux Test Facility (FFTF) nor the Pacific Northwest National Laboratory (PNNL) non-EM science activities are included. Figure 1-1 also shows the relationship between this Site Specification and the other Site management and planning documents. Similarly, the documents, orders, and laws referenced in this document represent only the most salient sources of requirements. Current and contractual reference data contain a complete set of source documents

  9. Environmental Management Audit: Southwestern Power Administration (Southwestern)

    International Nuclear Information System (INIS)

    1993-03-01

    This report documents the results of the Environmental Management Audit completed for the Southwestern Power Administration. During this Audit, activities and records were reviewed and personnel interviewed. The onsite portion of the Southwestern Audit was conducted from November 30 through December 11, 1992, by the US Department of Energy's Office of Environmental Audit (EH-24). EH-24 carries out independent assessments of Department of Energy (DOE) facilities and activities as part of the Assistant Secretary's Environmental Audit Program. This program is designed to evaluate the status of DOE facilities/activities regarding compliance with laws, regulations, DOE Orders, formal written procedures, compliance agreements, and Best Management Practices (BMPs). This internal oversight function plays an important role in improving the compliance status of DOE operations. The Environmental Management Audit stresses DOE's policy that it is the responsibility of line management to conduct operations in an environmentally sound and safe manner. The Environmental Management Audit focuses on management systems and programs, whereas the Environmental Baseline Audit conducted in March 1991 focused on specific compliance issues. The scope of the Southwestern Environmental Management Audit included a review of all systems and functions necessary for effective environmental management. Specific areas of review included: Organizational Structure; Environmental Commitment; Environmental Protection Programs; Formality of Environmental Programs; Internal and External Communication; Staff Resources, Training, and Development; and Program Evaluation, Reporting, and Corrective Action

  10. Integration of operational research and environmental management

    NARCIS (Netherlands)

    Bloemhof - Ruwaard, J.M.

    1996-01-01


    The subject of this thesis is the integration of Operational Research and Environmental Management. Both sciences play an important role in the research of environmental issues. Part I describes a framework for the interactions between Operational Research and Environmental Management.

  11. Integrated health and environmental risk assessment and risk management in large industrial areas. Case study Zagreb (CSZ). Final report for 1992

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-07-01

    This report is the result of the Phase 1 of the research within the Case Study Zagreb co-financed by the IAEA according to the project YUG/9/029. The basic long term aim of the project is the reduction in hazards to human health and to the environment in the area of Zagreb. This project is about risk assessment and risk management to achieve the environment protection goals.

  12. Integrated health and environmental risk assessment and risk management in large industrial areas. Case study Zagreb (CSZ). Final report for 1992

    International Nuclear Information System (INIS)

    1992-01-01

    This report is the result of the Phase 1 of the research within the Case Study Zagreb co-financed by the IAEA according to the project YUG/9/029. The basic long term aim of the project is the reduction in hazards to human health and to the environment in the area of Zagreb. This project is about risk assessment and risk management to achieve the environment protection goals

  13. Methodology of environmental risk assessment management

    Directory of Open Access Journals (Sweden)

    Saša T. Bakrač

    2012-04-01

    . and industrial activities that may pose threats to ecosystems, flora, fauna and humans. This model-concept gives a three-phase assessment where the assessor tries to determine whether a specific place may be subject to assessment, to characterize the level of risk and to confirm or refute the findings of the first phase, collecting information and corrective measures, or to establish basic requirements for environment protection. Risk assessment methodology - American concept: The third methodological approach to environmental risk assessment is developed by the U.S. Agency for Environmental Protection, 'U.S. EPA'. This model primarily involves the implementation of environmental risk assessment under the conditions of anthropogenic impact on environment, without aiming at solving problems of natural environmental risks, although this methodology can be applied in this environment segment as well. The methodology gives a clear distinction between a scientific (phase of estimation and a non-scientific (planning part of assessment. The phases of estimation given by this model are: problem formulation, risk analysis and risk characterization. Conclusion: Concepts and methodologies of all three models-concepts of assessment are mostly reduced to a common goal: how to reduce existing or avoid potential risks. However, it should be noted that the implementation of appropriate management and ecological risk assessment does not guarantee that risks will be avoided or that the implementation of these processes will be successful.

  14. Environmental Control Plan for the Industrial Hygiene Field Services Facility

    International Nuclear Information System (INIS)

    Donnelly, J.W.

    2000-01-01

    This environmental control plan is for the Hanford Site's Industrial Hygiene Field Services Facility, located in the 100-N Area. This facility is used for the maintenance and storage of respirators, respiratory equipment and testing, calibration and testing of industrial hygiene equipment, and asbestos fiber counting

  15. ORGANIZATIONAL CHANGE FOR THE ENVIRONMENTALLY SUSTAINABLE AIRPORT MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Vildan Durmaz

    2011-11-01

    Full Text Available Air transportation industry is a globally growing industry. As an inseparable part of this industry, airport management is also becoming more crucial issue to be dealt with. Airports offer economic and social benefits to the society, but also environmental impacts of airport operations are increasing due to high traffic growth. While airport capacity is increasing, airport operators are being responsible for mitigating environmental constraints. Today to implement airport environmental management system is seen as a critical way of solution. To ensure effective implementation of this system, an organizational change with definite roles, responsibilities and structure are needed. This study illustrates a way of organizational response to market forces and national regulations guiding the achievement of sustainable airports by determining the structure and the roles in an airport organization.

  16. Environmental compliance in the petrochemical industry in the Sarnia area

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-04-01

    In February 2004, the Ontario Ministry of the Environment directed its Environmental SWAT Team to conduct a comprehensive inspection sweep of Sarnia's industrial sector to ensure that all facilities in that region were brought into compliance with environmental legislation. The primary focus was to inspect areas with the potential for future spills or unlawful discharges that could pose risks to human health or the environment. Legislative and regulatory gaps that could allow environmentally unsafe practices to exist at the facilities were also revealed. The inspection sweep involved comprehensive inspections of 35 petrochemical plant's air emissions, water discharges and spill prevention plans. SWAT officers examined waste management, laboratory operations and other areas that must meet environmental legislative requirements. Nearly all of the of facilities inspected during the sweep were found to be in non-compliance with one or more legislative or regulatory requirement. Common deficiencies included: no spill contingency or spill prevention plans; not having a Certificate of Approval for wastewater collection and treatment works or air emission control equipment; altering equipment, systems, processes, or structure contrary to the existing Certificate of Approval; and improper chemical handling, storage and identification. As a result of the inspection, 6 facilities were ordered to develop both a spill prevention plan and a spill contingency plan and 2 facilities were ordered to develop a spill prevention plan. SWAT officers have followed up to ensure that companies have taken appropriate corrective actions. The inspection revealed some of the sound practices undertaken at some facilities, such as containment; monitoring; prevention of discharge of contaminants to air or water; waste water and storm water treatment; contingency planning; and process hazard analysis of all key processes. refs., tabs., figs.

  17. Profiling the environmental risk management of Chinese local environmental agencies

    NARCIS (Netherlands)

    He, G.; Zhang, L.; Mol, A.P.J.; Lu, Y.

    2013-01-01

    The increasing frequency and impact of environmental accidents have pushed the issue of environmental risk management (ERM) to the top of the Chinese governments’ agendas and popularized the term ‘emergency response.’ Although the boundary between environmental accidents and other types of accidents

  18. Energy management in the Canadian airline industry

    Energy Technology Data Exchange (ETDEWEB)

    1982-09-01

    The purpose of this report was to outline the current status of the Canadian airline industry's energy performance and to outline energy management programs undertaken within the industry. The study also provides an aviation energy management information base developed through a comprehensive computer bibliographical review. A survey of the industry was undertaken, the results of which are incorporated in this report. The Canadian airline industry has recognized the importance of energy management and considerable measures have been introduced to become more energy efficient. The largest single contributor to improved productivity is the acquisition of energy efficient aircraft. Larger airlines in particular have implemented a number of conservation techniques to reduce fuel consumption. However, both large and small airlines would further benefit through incorporating techniques and programs described in the annotated bibliography in this study. Rising fuel prices and economic uncertainties will be contributing factors to a smaller average annual growth in fuel consumption during the 1980s. The lower consumption levels will also be a result of continuing energy conservation awareness, new technology improvements, and improvements in air traffic control. 98 refs., 4 figs., 6 tabs.

  19. Environmental Assessment - Gotten across to industrial designers

    DEFF Research Database (Denmark)

    Bey, Niki

    2002-01-01

    This paper deals with a simplified method for environmental assessment for designers, the Oil Point Method (OPM). The paper explains characteristics of the method, such as the reduced problem with missing data, and describes how the method is used with its three steps, “FOCUS on the problem”, “EV...

  20. Environmental risk in the offshore industry

    International Nuclear Information System (INIS)

    Woods, I.T.; Shirley, D.; Bottelberghs, P.H.

    1991-01-01

    The subject of oil pollution of the sea by the offshore industry is topical as a result of recent incidents both in the U.K. and overseas. While these incidents have primarily involved crude carriers, it has led to pressure to quantify the risk to the environment from the offshore industry in general. In this paper a method for the assessment of the frequency and size of oil spills from offshore installations is presented. It relies on previously reported spills to determine spill size/frequency information for a range of offshore activities, such as transport by pipeline, drilling and processing. Modification factors are used so local conditions, such as the number of wells drilled, throughput and well depth, can be considered in the assessment of the oil spill risk from a particular installation

  1. Environmental Governance as a Model of Environmental Management

    Directory of Open Access Journals (Sweden)

    Budi Kristianto

    2016-02-01

    Full Text Available The concept of environmental governance does not promise practical solutions and provides short guidance in solving intertwined environmental problems in Indonesia. But at least environmental concept is useful when we try to realize environmental management in Indonesia currently. The worst is that the mistake has become routine manifesting in pragmatism in environmental management. Before it all too late, it is better that we keep in mind a German proverb in the beginning of this writing, which more or less, means “ we do not know what the future brings, but we know that we should act.”

  2. Development of an environmental impact model for the steel industry in Libya

    Science.gov (United States)

    Zaghinin, Mansur Salem

    The global demand for steel is rising due to the infrastructural development of emergent economies in countries such as India, China, Thailand and Libya. Consequently, global steel production has increased dramatically and is expected to grow further in the future. Processing iron and steel is associated with a number of sustainable development challenges, including various economic, environmental and social issues. The increasing prominence of environmental issues in international and national political discourse, including the developing countries, means that stakeholders demand that manufacturers minimise the negative impacts of their operations.The steel industry must be able to measure and assess its environmental impacts and demonstrate continuous improvements. This requires an environmental management strategy to manage and minimise impacts on the environment. This study focuses on developing an environmental impacts model in steel industry to investigate the most important environmental parameters and their importance in order to mitigate environmental impacts.Based on the literature review and the elements that are considered as waste (derived from the waste survey in Libyan iron and steel industry), the potential environmental impacts of the steel industry are identified as criteria and sub-criteria. Then, a model is built using the Analytical Hierarchy Process (AHP) software based on the identified criteria and sub-criteria.The model also illustrates the overall goal which is creating environmental impacts model for steel industry, in addition, criteria and sub-criteria are listed to clarify the situation and make the analysis clearer and understandable. Pair wise comparisons are used to derive accurate ratio scale priorities.The results are analysed and presented as prioritised list of environmental impacts. Moreover, a series of sensitivity analyses are conducted to investigate the impact of changing the priority of the criteria on the alternatives

  3. Environmental Restoration Program Management Control Plan

    International Nuclear Information System (INIS)

    1991-09-01

    This Management Control Plan has been prepared to define the Energy Systems approach to managing its participation in the US DOE's Environmental Restoration (ER) Program in a manner consistent with DOE/ORO 931: Management Plan for the DOE Field Office, Oak Ridge, Decontamination and Decommissioning Program; and the Energy Systems Environmental Restoration Contract Management Plan (CMP). This plan discusses the systems, procedures, methodology, and controls to be used by the program management team to attain these objectives

  4. Solutions for environmental reporting and energy management

    International Nuclear Information System (INIS)

    Suhonen, T.

    2004-01-01

    Especially two areas of energy applications - environmental reporting and energy management - are emphasized due to the current EU legislation and opening energy markets. Emissions reporting is driven by several EU directives and international agreements, like Emissions Trading Scheme. The directives guide implementation of the emission information management and reporting procedures, but requirements and differences defined by the local authorities are challenging both for the system supplier and for the energy producer. Energy management of industrial energy production (CHP) is an application, which offers real-time tools for forecasting mill's energy need and optimizing the energy balance between a mill's own production, purchases and consumption. This can bring significant reductions in mill energy costs and consumption. For these applications, the exact and well-managed information is needed. Data is retrieved from plant historians and event databases, ERP's and external sources. Calculation applications generate characteristic values (KPI's), which are used for monitoring operation, improving plant availability and boosting performance. Common office tools, like MS Excel, are the most convenient tools for reporting and processing information. Integration tools are needed to combine data from several sources to a single channel, handling messaging between applications and distributing information. (author)

  5. 75 FR 39209 - U.S.-China Environmental Industries Forum

    Science.gov (United States)

    2010-07-08

    ... policies or conditions that impede U.S. environmental technology exports to China, with emphasis on those... DEPARTMENT OF COMMERCE International Trade Administration U.S.-China Environmental Industries... Group of the U.S.-China Joint Commission on Commerce and Trade (JCCT) in its formulation of a U.S.-China...

  6. A Study on improvement of comprehensive environmental management system - activation of liberalized environmental management

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Hweu Sung; Kang, Chul Goo [Korea Environment Institute, Seoul (Korea)

    1998-12-01

    As a part of improvement on a comprehensive environmental management system, this study was attempted to find an activating policy for a liberalized environmental management. This study provided an activation plan of reasonable environmental regulation reform and liberalized environmental management through the analysis of foreign examples and domestic situation. Furthermore, it analyzed an institutional mechanism for a smooth operation of liberalized environmental management. 68 refs., 5 figs., 51 tabs.

  7. Management of industrial solid residues; Gerenciamento de residuos solidos industriais

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This chapter gives an overview on the management of industrial solid wastes, approaching the following subjects: classification of industrial solid residues; directives and methodologies for the management of industrial solid residues; instruments for the management of industrial solid residues; handling, packing, storage and transportation; treatment of industrial solid residues; final disposal - landfill for industrial residues; the problem of treatment and final disposer of domestic garbage in Brazil; recycling of the lubricant oils used in brazil; legislation.

  8. A mathematical model for environmental risk assessment in manufacturing industry

    Institute of Scientific and Technical Information of China (English)

    何莉萍; 徐盛明; 陈大川; 党创寅

    2002-01-01

    Environmental conscious manufacturing has become an important issue in industry because of market pressure and environmental regulations. An environmental risk assessment model was developed based on the network analytic method and fuzzy set theory. The "interval analysis method" was applied to deal with the on-site monitoring data as basic information for assessment. In addition, the fuzzy set theory was employed to allow uncertain, interactive and dynamic information to be effectively incorporated into the environmental risk assessment. This model is a simple, practical and effective tool for evaluating the environmental risk of manufacturing industry and for analyzing the relative impacts of emission wastes, which are hazardous to both human and ecosystem health. Furthermore, the model is considered useful for design engineers and decision-maker to design and select processes when the costs, environmental impacts and performances of a product are taken into consideration.

  9. Managing industrial price risk: a balancing act

    International Nuclear Information System (INIS)

    Muse, J-F.

    2000-01-01

    The challenge of managing industrial price risk is assessed by a senior executive of Cargill, a diversified industrial conglomerate, involved in steel manufacturing and recycling, oilseeds, cocoa, beef, pork, and poultry processing, fertilizer and fruit juice production, in addition to trading and financial risk management. Energy is a key component in many of Cargill's businesses, hence the company has good reason to be concerned about price volatility. The effects of energy risk management on the company's shareholders are demonstrated by an analysis of month-to-month price fluctuations over the Nov 1999 to Oct 2000 period, showing the monthly value of risk at the 95 per cent confidence level as $4,832,195. The effects of alternatives for an end-user such as passing on cost to customers, improving energy efficiency. fuel switching and production curtailment, are explored and limitations and problems with each of the approaches are discussed. The best options for industrial end-users of natural gas are suggested to be a proactive risk management program in the short-term and asset diversification, fuel switching, and geographic relocation of production facilities in the long-term

  10. Capital Structure, Environmental Dynamism, Innovation Strategy, and Strategic Risk Management

    DEFF Research Database (Denmark)

    Juul Andersen, Torben

    2005-01-01

    Previous research found that capital structure affects performance when it is adapted to the level of environmental dynamism and pursuit of an innovation strategy. The current study reproduces some of these relationships in a more recent dataset but also identifies significant nuances across...... industrial environments. Analyses of a large cross sectional sample and various industry sub-samples suggest that other factors have influenced capital structure effects in recent years including flexibilities in multinational organization and effective strategic risk management capabilities....

  11. Ethiopian Journal of Environmental Studies and Management ...

    African Journals Online (AJOL)

    Author Guidelines; » Copyright Notice. Author Guidelines. Guide to Authors: The Ethiopian Journal of Environmental Studies and Management (EJESM) are based in Department of Geography and Environmental Studies, Bahir Dar University, ...

  12. NETL-EERC ENVIRONMENTAL MANAGEMENT COOPERATIVE AGREEMENT

    Energy Technology Data Exchange (ETDEWEB)

    Christina B. Behr-Andres; Daniel J. Daly

    2001-07-31

    This final report summarizes the accomplishments of the 6-year Environmental Management Cooperative Agreement (EMCA) between the Energy and Environmental Research Center (EERC), a nonprofit, contract-supported unit of the University of North Dakota, and the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). The first portion of the report summarizes EMCA's structure, activities, and accomplishments. The appendix contains profiles of the individual EMCA tasks. Detailed descriptions and results of the tasks can be found separately in published Final Topical Reports. EMCA (DOE Contract No. DE-FC21-94MC31388) was in place from the fall of 1994 to the summer of 2001. Under EMCA, approximately $5.4 million was applied in three program areas to expedite the commercialization of 15 innovative technologies for application in DOE's EM Program ($3.8 million, or 69% of funds), provide technical support to the Deactivation and Decommissioning Focus Area (DDFA; $1.04 million, or 19% of funds), and provide for the coordination of the EMCA activities ($0.62 million, or 11% of funds). The following sections profile the overall accomplishments of the EMCA program followed by a summary of the accomplishments under each of the EMCA areas: commercialization, DDFA technical support, and management. Table 1 provides an overview of EMCA, including program areas, program activities, the duration and funding of each activity, and the associated industry partner, if appropriate.

  13. Environmental Reporting and Disclosure Practices - In Malaysian Property Industry

    OpenAIRE

    Natthondan, Shankari

    2009-01-01

    This research examined and analyzed the extent of environmental reporting and disclosure practices of the Kuala Lumpur Composite Index Companies (KLCI) as listed on the Bursa Malaysia on 21 January 2008. In particular the property industry companies were identified as a high profile sector as it is more sensitively exposed to environmental activities. The degree of reporting on environmental matters by this category of listed companies is indicative of the trend of the overall compliance and ...

  14. Environmental management for dredging sediments - the requirement of developing nations.

    Science.gov (United States)

    Manap, Norpadzlihatun; Voulvoulis, Nikolaos

    2015-01-01

    Scientific research has characterized the effects of dredging, an underwater excavation process for navigational purposes or material extraction, and has shown its association with a number of chemical, physical and biological impacts. Due to this, much environmental management has been applied in the dredging industry in order to manage its detrimental effects. However, developing nations may have different approaches towards their dredging environmental management to compare to their companions with higher economic strength. Moreover, scientific evidence to make an informed decision is often lacking, hence affecting the number of research executed at these nations, limiting their efforts to preserve the environment. This paper reviews the dredging environmental impacts and its two important factors, dredging technology and sediment characteristic, that determine the magnitude of impacts through literature review, and discusses the need for a more integrated dredging environmental management to be developed for developing nations. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Training and Education of Environmental Managers

    DEFF Research Database (Denmark)

    Ulhøi, John Parm; Sinding, Knud; Madsen, Henning

    An analysis of the training backgrounds of environmental managers in a range of environmentally advanced European companies reveals the very broad qualifications ideally required of these managers. At the same time, however, it is found that the provision of training opportunities relevant...... for this important category of managers is both limited in scope and foundation, and highly dependent on the randomly distributed efforts of educators with an environmental interest....

  16. Making offshore industries greener: negotiating environmental policy in the Dutch oil and gas sector

    International Nuclear Information System (INIS)

    Hinssen, J.

    1994-01-01

    In this paper the negotiations between the Dutch Government and the oil and gas sector regarding environmental measures for the offshore industry are analysed. Dutch environmental policy is presently being developed via 'Target Group Management'. The instrument used in this approach is policy negotiations, resulting in covenants. By signing a covenant, both government and industry take responsibility for the development and implementation of a realistic environmental policy. Negotiating environmental policies, however, can be problematic. This relates to the delay in obtaining an integrated approach to environmental problems. It is not unlikely that, in the four years required for the negotiation process, a legally binding environmental law might also have been developed. It is concluded that the value of the covenant mainly depends on the goodwill of the parties involved. (Author)

  17. Environmental and Energy Aspects of Construction Industry and Green Buildings

    Science.gov (United States)

    Kauskale, L.; Geipele, I.; Zeltins, N.; Lecis, I.

    2017-04-01

    Green building is an important component of sustainable real estate market development, and one of the reasons is that the construction industry consumes a high amount of resources. Energy consumption of construction industry results in greenhouse gas emissions, so green buildings, energy systems, building technologies and other aspects play an important role in sustainable development of real estate market, construction and environmental development. The aim of the research is to analyse environmental aspects of sustainable real estate market development, focusing on importance of green buildings at the industry level and related energy aspects. Literature review, historical, statistical data analysis and logical access methods have been used in the research. The conducted research resulted in high environmental rationale and importance of environment-friendly buildings, and there are many green building benefits during the building life cycle. Future research direction is environmental information process and its models.

  18. Program integration at JVC Industrial de Mexico, S.A. de C.V./Electric energy saving/Environmental management system /ISO 14001 standard; Integracion de programas en JVC Industrial de Mexico, S.A. de C.V. Ahorro de energia electrica/Sistema de administracion ambiental/Estandar ISO 14001

    Energy Technology Data Exchange (ETDEWEB)

    Argote Molina, Martin [JVC Industrial de Mexico S. A. de C. V., Tijuana (Mexico)

    1998-12-31

    It is possible, and besides logic, the integration of programs such as the electric energy saving and an environmental management system. In managing the consumption and the demand of the electric service, there is an effect on the pollutants emitted for the generation. It is clear that the user in not, and can not be, responsible for the type of fuel used but its importance in project planning is out of question. In its turn the central point of the environmental management system, consists in identifying the main effects on the environment caused by its activities, services and products, as well as the current or potential control level of the enterprise on them. Such identification and further evaluation took us at JVC Industrial de Mexico, to integrate conceptually and operationally such programs. The commitment with the Management was concentrated and strengthened resulting in a fuller consciousness of resource administration. [Espanol] Es posible, ademas de logica, la integracion de programas tales como el ahorro de energia electrica y un sistema de administracion ambiental. Al administrar el consumo y la demanda del servicio electrico tenemos un efecto en los contaminantes emitidos para la generacion. Es claro que el usuario no es, ni puede ser, responsable del tipo de combustible utilizado pero su importancia en la planeacion de proyectos es indiscutible. A su vez el punto central del sistema de administracion ambiental, consiste en identificar los principales efectos en el medio ambiente causados por sus actividades, servicios o productos, asi como el nivel de control actual o potencial de la empresa sobre ellos. Dicha identificacion y la posterior evaluacion nos llevo, en JVC Industrial de Mexico, a integrar tanto conceptual como operacionalmente dichos programas. El compromiso de la Gerencia se vio concentrado y fortalecido dando como resultado una conciencia mas plena de la administracion de recursos.

  19. Program integration at JVC Industrial de Mexico, S.A. de C.V./Electric energy saving/Environmental management system /ISO 14001 standard; Integracion de programas en JVC Industrial de Mexico, S.A. de C.V. Ahorro de energia electrica/Sistema de administracion ambiental/Estandar ISO 14001

    Energy Technology Data Exchange (ETDEWEB)

    Argote Molina, Martin [JVC Industrial de Mexico S. A. de C. V., Tijuana (Mexico)

    1999-12-31

    It is possible, and besides logic, the integration of programs such as the electric energy saving and an environmental management system. In managing the consumption and the demand of the electric service, there is an effect on the pollutants emitted for the generation. It is clear that the user in not, and can not be, responsible for the type of fuel used but its importance in project planning is out of question. In its turn the central point of the environmental management system, consists in identifying the main effects on the environment caused by its activities, services and products, as well as the current or potential control level of the enterprise on them. Such identification and further evaluation took us at JVC Industrial de Mexico, to integrate conceptually and operationally such programs. The commitment with the Management was concentrated and strengthened resulting in a fuller consciousness of resource administration. [Espanol] Es posible, ademas de logica, la integracion de programas tales como el ahorro de energia electrica y un sistema de administracion ambiental. Al administrar el consumo y la demanda del servicio electrico tenemos un efecto en los contaminantes emitidos para la generacion. Es claro que el usuario no es, ni puede ser, responsable del tipo de combustible utilizado pero su importancia en la planeacion de proyectos es indiscutible. A su vez el punto central del sistema de administracion ambiental, consiste en identificar los principales efectos en el medio ambiente causados por sus actividades, servicios o productos, asi como el nivel de control actual o potencial de la empresa sobre ellos. Dicha identificacion y la posterior evaluacion nos llevo, en JVC Industrial de Mexico, a integrar tanto conceptual como operacionalmente dichos programas. El compromiso de la Gerencia se vio concentrado y fortalecido dando como resultado una conciencia mas plena de la administracion de recursos.

  20. Evaluating the Management System Approach for Industrial Energy Efficiency Improvements

    Directory of Open Access Journals (Sweden)

    Thomas Zobel

    2016-09-01

    Full Text Available Voluntary environmental management systems (EMS based on the international standard ISO 14001 have become widespread globally in recent years. The purpose of this study is to assess the impact of voluntary management systems on energy efficiency in the Swedish manufacturing industry by means of objective industrial energy data derived from mandatory annual environmental reports. The study focuses on changes in energy efficiency over a period of 12 years and includes both ISO 14001-certified companies and non-certified companies. Consideration is given to energy improvement efforts in the companies before the adoption of ISO 14001. The analysis has been carried out using statistical methods for two different industrial energy parameters: electricity and fossil fuel consumption. The results indicate that ISO 14001 adoption and certification has increased energy efficiency regarding the use of fossil fuel. In contrast, no effect of the management systems has been found concerning the use of electricity. The mixed results of this study are only partly in line with the results of previous studies based on perceptions of company representatives.

  1. Citation Classics from Industrial Marketing Management

    DEFF Research Database (Denmark)

    Lindgreen, Adam; Di Benedetto, C. Anthony

    2017-01-01

    , system sellers and systems integrator, third-party logistics providers, and value). Finally, each of the 30 citation classics is introduced, and the classics' theoretical implications to business-to-business marketing management and fields related to (e.g., supply chain management, strategic management......This article proposes a categorization of what constitutes a citation classic. General observations reveal, with regard to the top 30 citation classics from Industrial Marketing Management, the number of authors per article, country of origin of the lead author, and type of article (literature...... review, qualitative methodology, or quantitative methodology). In addition, these citation classics can be classified by topic (firm performance, goods-dominant and service-dominant logics, Internet and high-technology markets, product innovation, relationships and business networks, supply chains...

  2. Components of sustainability considerations in management of petrochemical industries.

    Science.gov (United States)

    Aryanasl, Amir; Ghodousi, Jamal; Arjmandi, Reza; Mansouri, Nabiollah

    2017-06-01

    Sustainability comprises three pillars of social, environmental, and economic aspects. Petrochemical industry has a great inter-related complex impact on social and economic development of societies and adverse impact on almost all environmental aspects and resource depletion in many countries, which make sustainability a crucial issue for petrochemical industries. This study was conducted to propose components of sustainability considerations in management of petrochemical industries.A combination of exploratory study-to prepare a preliminary list of components of sustainable business in petrochemical industries based on review of literature and Delphi-to obtain experts' view on this preliminary list and provide a detailed list of components and sub-components that should be addressed to bring sustainability to petrochemical industries, were used.Two sets of components were provided. First general components, which include stakeholders (staffs, society, and environment) with four sub-components, financial resources with 11 sub-components, improvement of design and processes with nine sub-components, policy and strategy of cleaner production with seven sub-components and leadership with seven sub-components. The second operational components included raw material supply and preparation with five, synthesis with ten, product separation and refinement with nine, product handling and storage with five, emission abatement with eight, and improvement of technology and equipment with 16 sub-components.

  3. The increasing environmental challenge for the Canadian petroleum industry

    International Nuclear Information System (INIS)

    McFarland, J.

    1992-01-01

    The environmental challenge facing the Canadian petroleum industry involves the increasing public call for a clean environment and a more intense pressure on the technological and economic means to achieve such an environment. It is estimated that the potential economic impact on the petroleum industry of national environmental response strategies under Canada's Green Plan could amount to ca $17 billion over the next 15-20 years. Leading environmental issues of relevance to the petroleum industry are toxic contamination of groundwater and surface land, particulates in the air, ground-level emissions such as ozone and nitrogen oxides, acid rain, oil spill prevention, waste reduction, and greenhouse gas emissions. Increased environmental costs pose a problem for the petroleum industry since profitability is suffering, due to oversupply and low prices. It is suggested that more attention is needed in three areas of environmental policy development in Canada: determination of environmental priorities, reflecting response strategies that achieve the greatest reduction in risk at an affordable cost; increased understanding of the links between trade and the environment; and harnessing of market forces to achieve environmental goals

  4. TOTAL QUALITY MANAGEMENT AND CONTEMPORARY HOTEL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Ivica Batinić

    2013-04-01

    Full Text Available Strong competition in the market has caused the development of a new management approach known as Total Quality Management (TQM. Due to importance that quality plays in achieving competitive advantage, the hotel industry started to apply TQM. During the introduction of these systems, hotel companies may use different approaches to suit their own buseiness requirements. In doing so, 'TQM standards' can be used, or various international standards and models of business excellence Malcolm Balridge National Quality Award and European Quality Award.

  5. Credit Risk Management in Chinese Banking Industry

    OpenAIRE

    Zhang, Lei

    2006-01-01

    Abstract Credit risk is by far the most important risk faced by banks, and it influences the bank profitability and its long-term operation significantly. Well management on credit risk can be a competitive advantage for banks in the competitive banking industry. Chinese banks suffer from serious financial fragility manifested by high proportions of NPLs and low capital adequacy ratios (Bonin and Huang, 2001). This dissertation examines the real credit performance of Chinese banks ba...

  6. Trends and Perspective in Industrial Maintenance Management

    DEFF Research Database (Denmark)

    Luxhoj, James T.; Thorsteinsson, Uffe; Riis, Jens Ove

    1997-01-01

    With increased global competition for manufacturing, many companies are seeking ways to gain competitative advanges with respect to cost, service, quality and on-time deliveries. The role that effective maintenance management plays in contributing to overall organizational productivity has received...... increased attention. Trends and perspective in industrial maintenance are presented. The result of benchmarking studies from Scandinavia and United States are also presented and compared. Case studies that examine maintenance methods, knowledge, organization and information systems in three Danish...

  7. Supply Chain Management in Retail Industry

    OpenAIRE

    Ivana Plazibat; Sladana Brajevic

    2009-01-01

    Companies attempt to change their ways of doing business to find out new approaches to customers. Internationalization and consolidation of retailing turned traditional retail industry upside down. Fast and efficient operational models and new technologies constantly challenge retailers. The term supply chain management (SCM) is relatively new in the literature, appearing first in 1982. Supply chain is a set of institutions that moves goods from the point of production to the point of consump...

  8. Essays in industrial organization and management strategy

    OpenAIRE

    de Bijl, P.W.J.

    1996-01-01

    This thesis contains five essays in the theory of industrial organization and management strategy. An introduction makes the main ideas accessible to non-specialists by presenting the essays as fictitious cases. The first essay investigates strategic disclosure of verifiable information. The disclosed information concerns a hidden action, and the transmission of information takes place in a noisy environment. The second essay explores how search costs and informational asymmetries influence t...

  9. Environmental risk communication in the petroleum industry

    International Nuclear Information System (INIS)

    Mulligan, J.

    1997-01-01

    The principles and practices of risk communication in the petroleum industry in Alberta were presented. In order to effectively communicate about risk, three challenges must be met: (1) the representatives of the oil company must accept the legitimacy of the public's assessment of risk, (2) the communication needs to be two-way, and (3) the risk-related issues in the community must be addressed through a process of participatory decision-making where the public is accepted as a legitimate partner. For the oil and gas companies, failing to undertake effective risk communication can lead to many problems, such as difficulties in obtaining regulatory approvals, production delays, high legal fees, and loss of public trust

  10. OPTIMAL CONTROL THEORY FOR SUSTAINABLE ENVIRONMENTAL MANAGEMENT

    Science.gov (United States)

    With growing world population, diminishing resources, and realization of the harmful effects of various pollutants, research focus in environmental management has shifted towards sustainability. The goal of a sustainable management strategy is to promote the structure and operati...

  11. Hanford Environmental Management Program implementation plan

    International Nuclear Information System (INIS)

    1988-08-01

    The Hanford Environmental Management Program (HEMP) was established to facilitate compliance with the applicable environmental statues, regulations, and standards on the Hanford Site. The HEMP provides a structured approach to achieve environmental management objectives. The Hanford Environmental Management Program Plan (HEMP Plan) was prepared as a strategic level planning document to describe the program management, technical implementation, verification, and communications activities that guide the HEMP. Four basic program objectives are identified in the HEMP Plan as follows: establish ongoing monitoring to ensure that Hanford Site operations comply with environmental requirements; attain regulatory compliance through the modification of activities; mitigate any environmental consequences; and minimize the environmental impacts of future operations at the Hanford Site. 2 refs., 24 figs., 27 tabs

  12. Environmental management systems and organizational change

    DEFF Research Database (Denmark)

    Jørgensen, Tine Herreborg

    2000-01-01

    and environmental management systems. The structure of the organizations has changed, the relationships with external partners have strengthened and the implementation of quality and environmental management systems has trimmed the organizations to manage and develop these areas. The organization analysis is based......The establishment of an environmental management system and its continuous improvements is a process towards a reduction of the companies' and the products' environmental impact. The organizations' ability to change is crucial in order to establish a dynamic environmental management system...... and to achieve continuous environmental improvements. The study of changes gives an insight into how organizations function, as well as their forces and barriers. This article focuses on the organizational changes that two companies have undergone from 1992 up until today in connection with their quality...

  13. Governance of environmental risk: new approaches to managing stakeholder involvement.

    Science.gov (United States)

    Benn, Suzanne; Dunphy, Dexter; Martin, Andrew

    2009-04-01

    Disputes concerning industrial legacies such as the disposal of toxic wastes illustrate changing pressures on corporations and governments. Business and governments are now confronted with managing the expectations of a society increasingly aware of the social and environmental impacts and risks associated with economic development and demanding more equitable distribution and democratic management of such risks. The closed managerialist decision-making of the powerful bureaucracies and corporations of the industrial era is informed by traditional management theory which cannot provide a framework for the adequate governance of these risks. Recent socio-political theories have conceptualised some key themes that must be addressed in a more fitting approach to governance. We identify more recent management and governance theory which addresses these themes and develop a process-based approach to governance of environmental disputes that allows for the evolving nature of stakeholder relations in a highly complex multiple stakeholder arena.

  14. Electricity company managers' views of environmental issues: Implications for environmental groups and government

    International Nuclear Information System (INIS)

    Fischhoff, Maya E.

    2007-01-01

    The electricity industry's environmental impacts are a matter of acute interest to many outsiders, including government and environmental groups-and they have sought to affect those impacts through regulations, public pressure, and technical assistance. These approaches reflect outsiders' intuitive theories regarding the industry's goals, practices, and capabilities. The research reported here provides a systematic insiders' view on these processes, based on in-depth interviews with 70 middle managers in two electricity companies heavily reliant on coal. It finds managers sincerely committed to environmental action, but often frustrated by confusing regulatory requirements, perceived costs, and other challenges. It identifies ways of enabling middle managers to act on their commitment, with lessons relevant for outside groups and those within companies seeking to effect change

  15. ENVIRONMENTAL MANAGEMENT AT STAR RATED HOTEL IN BALI

    Directory of Open Access Journals (Sweden)

    Jaya Pramono

    2014-03-01

    . The sustaining the hospitality industry, b. The contribution to community development, and c. The satisfaction of the guests at star rated hotels in Bali. In accordance with these results is it suggested that every hotels are encouraged to do the process of environmental management because through this process, hotel will have a better relationship with the community, it had the preferred of tourists trend, it had became more prudent in term of resources use as a sustainable environmental efforts, and finally these can contribute to preserving the assets of the world for future generations.

  16. Energy management оf industrial enterprise

    Directory of Open Access Journals (Sweden)

    Lyaskovskaya E.A.

    2017-01-01

    Full Text Available In the intensifying condition of economic situation and increasing competitiveness in domestic and foreign markets, the most important way to develop competitive ability of an industrial company is to reduce energy costs in the production process. Insufficient level of the efficiency of energy resources usage affects an industrial company’s performance indicators and its investment attractiveness. A promising way of solving this matter is to develop and implement a strategy of rational energy consumption, which is aimed at the realization of company’s potential to optimize the consumption of electric energy by using internal and external resources in order to minimize energy costs. The strategy of rational energy consumption defines how an industrial company acquires electric energy and uses it to sustain the production. While developing and implementing the strategy, one should use a systemic and complex way and consider the following: peculiarities of electric energy and power as products; the structure of electric energy market and the possibilities of its consumers; peculiarities of price-formation on electric energy market; technical and technological, organizational and administrative, social and economic parameters of a company, characteristic features of its resource potential and production processes; the results of company’s energy efficiency audit and energy problems; company’s reserves that can increase its energy efficiency. An integral strategy of energy consumption includes a strategy for energy preservation and efficiency and a strategy for energy costs management. Both strategies are interrelated and serve for one purpose, which is minimizing the energy costs. This division helps simplify the analysis, search for alternatives and realization of energy management on operative, tactical and strategic levels, considering the regional and industry-specific peculiarities of an industrial company, its financial performance and

  17. The Environmental Challenges for the Oil Industry

    International Nuclear Information System (INIS)

    Del Manso, F.

    1998-01-01

    Oil has been and will continue to be indispensable to assure the growth of the world economy, but it is also responsible to have an impact on the environment. One of the most important challenges for the future, in particular for the oil sector, is to make this growth sustainable for the environment. To do this, refineries must plan a huge amount of investments for the next future to modify substantially their industrial structures to reformulate transportation fuels (diesel and gasoline) to comply the new limits for the emissions generated during the production and distribution of oil products and to apply new safety rules in order to improve the compatibility of the refineries with the territory. To fulfil all this actions the oil sector will have to face very high costs without any certainty of the return of investments, due to the extreme uncertainty to forecast the future oil demand in Italy after the Kyoto Protocol. To be ready within the year 2005, Italian refineries must decide now to invest, but they are not sure to have a market in the future for the products that they are going to produce [it

  18. Some environmental challenges which the uranium production industry faces in the 21st century

    International Nuclear Information System (INIS)

    Zhang Lisheng

    2004-01-01

    Some of the environmental challenges which the uranium production industry faces in the 21st century have been discussed in the paper. They are: the use of the linear non-threshold (LNT) model for radiation protection, the concept of 'controllable dose' as an alternative to the current International Commission on Radiological Protection (ICRP) system of dose limitation, the future of collective dose and the ALARA (As low As Reasonably Achievable) principle and the application of a risk-based framework for managing hazards. The author proposes that, the risk assessment/risk management framework could be used for managing the environmental, safety and decommissioning issues associated with the uranium fuel cycle. (author)

  19. Fleet management tools for the utility industry

    Energy Technology Data Exchange (ETDEWEB)

    Caywood, J. [Terex Telelect, Watertown, SD (United States)

    2002-08-01

    In order to enable fleet managers to make the appropriate decisions concerning buying, selling, renting, leasing or repairing vehicles, information about ownership and operating cost and utilization are important. Fleet management tools are now available in the heavy construction industry. The author describes one such fleet management services customized for the utility industry: FleetEdge. This system utilizes current and future technologies to enable the managers to take proactive or predictive approaches to fleet management. An example of a company that has opted for this system was reviewed: Reliant Energy-Houston Metro. The data collection process was explained. A mini-computer processor is fitted on the equipment, and the requested monitoring parameters in turn determine the variety of sensors and alarms to be selected. Location can also be monitored through the use of Global Positioning System (GPS) equipment. The parameters normally include low engine oil pressure, high engine operating temperature, high transmission operating temperature, high hydraulic oil temperature, engine hours. Wireless data transfer is effected via cellular or satellite networks. The data is then collected and checked for errors and format at a hub before going to the computer server through the Internet. Information is transmitted from the accounting system to fleet management service through a secure interface. The data is then configured to meet the client's needs. It results in up to date, understandable information to the client. Equipment utilization, downtime and cost by machine or category is easily accessible and printed if required. Fleet equipment status is provided, as well as hourly cost analysis. Other reports are also available. 2 tabs., 2 figs.

  20. US - Former Soviet Union environmental management activities

    International Nuclear Information System (INIS)

    1995-09-01

    The Office of Environmental Management (EM) has been delegated the responsibility for US DOE's cleanup of nuclear weapons complex. The nature and the magnitude of the waste management and environmental remediation problem requires the identification of technologies and scientific expertise from domestic and foreign sources. This booklet makes comparisons and describes coordinated projects and workshops between the USA and the former Soviet Union

  1. Environmental Management Performance Report 11/1999

    Energy Technology Data Exchange (ETDEWEB)

    EDER, D.M.

    2000-02-01

    The purpose of the Environmental Management Performance Report (EMPR) is to provide the Department of Energy Richland Operations Office's (DOE-RL's) report of Hanford's Environmental Management performance by: US Department of Energy, Richland Operation

  2. Knowledge management for nuclear industry operating organizations

    International Nuclear Information System (INIS)

    2006-10-01

    The nuclear energy sector is characterized by lengthy time frames and technical excellence. Early nuclear plants were designed to operate for 40 years but their service life now frequently extends between 50 and 60 years. Decommissioning and decontamination of nuclear plants will also be spread over several years resulting in a life cycle - from cradle to grave - in excess of 100 years, which gives rise to two challenges for the nuclear industry: (1) Retention of existing skills and competencies for a period of over fifty years, particularly in countries where no new nuclear power plants are being planned; and (2) Development of new skills and competencies in the areas of decommissioning and radioactive waste management in many industrialized countries if younger workers cannot continue to be attracted to the nuclear disciplines. As many nuclear experts around the world are retiring, they are taking with them a substantial amount of knowledge and corporate memory. Typically, these retirees are individuals who can answer questions very easily and who possess tacit knowledge never before extracted from them. The loss of such employees who hold knowledge critical to either operations or safety poses a clear internal threat to the safe and reliable operation of nuclear power plants (NPPs). Therefore, the primary challenge of preserving such knowledge is to determine how best to capture tacit knowledge and transfer it to successors. These problems are exacerbated by the deregulation of energy markets around the world. The nuclear industry is now required to reduce its costs dramatically in order to compete with generators that have different technology life cycle profiles. In many countries, government funding has been dramatically reduced or has disappeared altogether while the profit margins of generators have been severely squeezed. The result has been lower electricity prices but also the loss of expertise as a result of downsizing to reduce salary costs, a loss of

  3. Application of remote sensing to environmental management

    Energy Technology Data Exchange (ETDEWEB)

    Handley, J F

    1980-01-01

    The contribution of remote sensing to environmental management procedures at the sub-regional scale is examined in relation to the County Structure environmental management plan for Merseyside County, England. The various seasons, scales and emulsions used for aerial photography in the county are indicated, and results of aerial surveys of the distribution of derelict and despoiled land and of natural environments are presented and compared with ground surveys. The use of color infrared and panchromatic aerial photographs indicating areas of environmental stress and land use in the formulation, implementation and monitoring of environmental management activities is then discussed.

  4. Design Management in the Textile Industry - A Network Perspective

    DEFF Research Database (Denmark)

    Christensen, Poul Rind; Bang, Anne Louise

    In this paper we explore textile design activities and textile design management from an industrial network perspective. The textile industry is probably one of the most globalized manufacturing industries in the world and thus one of the most dispersed industries on the globe. Most studies on de...... management in order to maintain the relationships in their network of customers and suppliers....

  5. Environmental conflicts: Key issues and management implications ...

    African Journals Online (AJOL)

    Environmental crises and problems throughout the world are widespread and increasing rapidly. In relation to these concerns, the article discusses the following aspects: people and the environment, environmental conflicts, climate change and environmental conflicts, and management implications. The section on people ...

  6. A centralized information management system for environmental science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Namboodiri, K. [Martin Marietta Technical Services, Inc., Bay City, MI (United States)

    1995-12-31

    During the past few decades there have been several serious initiatives focusing on the applications of computational technology towards understanding the diverse fields of environmental research such as environmental monitoring, pollution prevention, and hazardous chemical mitigation. Recently, due to the widespread application of high performance computer technology and the renewed interest of the industrial community in environmental protection, we are witnessing an era of environmental information explosion. In light of these large-scale computer-driven developments, the author identifies a highly desirable initiative for this field, which is solely devoted to a centralized environmental database and information management system. This talk will focus on some design aspects of such an information management system.

  7. Protection of industrial and business secrets in environmental protection law

    International Nuclear Information System (INIS)

    Breuer, R.

    1986-01-01

    The author investigates the relation between environmental protection and data protection, especially concerning the protection of industrial and business secrets. For this kind of conflict there are only general administrative and procedural provisions with little systematic order. Special provisions of data protection covering all aspects of industrial and business secrets, as for example in social or tax law, do not exist in German law until now. (WG) [de

  8. Energy and Environmental Challenges for the Japanese Automotive Industry

    OpenAIRE

    Sperling, Daniel

    2000-01-01

    The turn of the century is proving to be a period of turmoil and uncertainty for the automotive industry. The industry confronts growing worldwide demands for greater environmental quality, but now benefits from an emerging technological revolution that provides them with the tools to respond effectively to those demands. Rapid innovation is occurring in lightweight materials, various ICE powertrain enhancements made possible by computer controls, energy conversion processes, energy storage, ...

  9. Training for Environmental Management - Industry and Sustainability

    DEFF Research Database (Denmark)

    Ulhøi, John Parm; Madsen, Henning; Kjær, M.

    Sustainable development requires innovative approaches at organisation level as well as a range of new skills and competencies throughout the workforce. The development of appropriate training materials and courses is an essential part of this equation. This report presents an overview...

  10. Development of the environmental data management system

    International Nuclear Information System (INIS)

    Tatebe, Kazuaki; Suzuki, Yurina; Shirato, Seiichi; Sato, Yoshinori

    2012-02-01

    The recent society requires business activities with environmental consideration to every enterprise. Also, Japanese laws require those activities. For example, 'Law Concerning the Promotion of Business Activities with Environmental Consideration by Specified Corporations, etc, by Facilitating Access to Environmental Information, and Other Measures' (Environmental Consideration Law) mandates publication of a report relating to the activities of environmental consideration to each enterprise above designated size. 'Act on the Rational Use of Energy' mandates the report of the results of energy consumption and the long-term plan of the rational use of energy. Moreover, 'Act on Promotion of Global Warming Countermeasures' mandates the report of the greenhouse gas emissions. In addition to those, 'Water Pollution Control Law', 'Waste Management and Public Cleaning Law' and other environmental laws as well as environmental ordinances require business activities with environmental consideration to all companies. So, it is very important for Japan Atomic Energy Agency (JAEA) to report business activities with environmental consideration in order to build up trustful relations with the nation and communities. The Environmental Data Management System has been developed as the data base of business activities with environmental consideration in JAEA and as the means to promote the activities at every site and office of JAEA. This report summarizes the structure of the Environmental Data Management System, kinds of environmental performance data treated by the system, and gathering methods of the data. (author)

  11. Supply Chain Management in Industrial Symbiosis Networks

    DEFF Research Database (Denmark)

    Herczeg, Gabor

    2016-01-01

    , as well as in policy documents from e.g. the European Union, the concepts of circular econ- omy and closed-loop supply chains have received significant attention. One of the manifestations of these developments are industrial symbiosis networks. These networks are a collaborative effort to more...... sustainable production op- erations, and are characterized by a supply chain reconfiguration that uses one company’s wastes or by-products as a raw material for another company, avoiding waste disposal while also reducing material requirements. The re- sulting networks of relationships contribute to regional...... sustainable develop- ment efforts, and emphasize synergistic relations, community, and collabora- tion. This thesis takes an operations and supply chain management perspec- tive on industrial symbiosis networks. More specifically, the thesis elaborates on the collaborative and competitive characteristics...

  12. Project Management Software for Distributed Industrial Companies

    Science.gov (United States)

    Dobrojević, M.; Medjo, B.; Rakin, M.; Sedmak, A.

    This paper gives an overview of the development of a new software solution for project management, intended mainly to use in industrial environment. The main concern of the proposed solution is application in everyday engineering practice in various, mainly distributed industrial companies. Having this in mind, special care has been devoted to development of appropriate tools for tracking, storing and analysis of the information about the project, and in-time delivering to the right team members or other responsible persons. The proposed solution is Internet-based and uses LAMP/WAMP (Linux or Windows - Apache - MySQL - PHP) platform, because of its stability, versatility, open source technology and simple maintenance. Modular structure of the software makes it easy for customization according to client specific needs, with a very short implementation period. Its main advantages are simple usage, quick implementation, easy system maintenance, short training and only basic computer skills needed for operators.

  13. Industrial demand side management: A status report

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, M.F.; Conger, R.L.; Foley, T.J. [and others

    1995-05-01

    This report provides an overview of and rationale for industrial demand side management (DSM) programs. Benefits and barriers are described, and data from the Manufacturing Energy Consumption Survey are used to estimate potential energy savings in kilowatt hours. The report presents types and examples of programs and explores elements of successful programs. Two in-depth case studies (from Boise Cascade and Eli Lilly and Company) illustrate two types of effective DSM programs. Interviews with staff from state public utility commissions indicate the current thinking about the status and future of industrial DSM programs. A comprehensive bibliography is included, technical assistance programs are listed and described, and a methodology for evaluating potential or actual savings from projects is delineated.

  14. Environmental and Socio-economic Aspects of the Operation of Industrial Regions: The Case Study of the Industrial Area of Alexandroupolis (Greece)

    International Nuclear Information System (INIS)

    Theofanoudi, Aglaia; Diakaki, Christina; Katsivela, Eleftheria

    2009-01-01

    The paper summarizes the results of a study concerning the operation of industrial plants and their effects to the environment. It also addresses, shortly, the consequences to the quality of human life and proposes potential measures that may contribute to the reduction of the negative environmental impacts. The relatively small organized Industrial Area of Alexandroupolis (Greece) is examined as a case study. In particular, the activities of its major industrial facilities are presented and their emissions to the environment are examined. In addition, the socio-economic aspects of the operation of the Industrial Area are studied. The results of the study showed that the operation of the Industrial Area has specific negative effects in the natural environment of the region and in the quality of life of the residents. Methodological and legislative tools, such as control systems for the environmental pollution, the green chemistry, and the environmental management systems, may be employed to assist the prevention and confrontation of environmental problems

  15. Integrated Safety, Environmental and Emergency Management System (ISEEMS)

    International Nuclear Information System (INIS)

    Silver, R.; Langwell, G.; Thomas, C.; Coffing, S.

    1996-01-01

    The Risk Management and NEPA (National Environmental Policy Act) Department of Sandia National Laboratories/New Mexico (SNL/NM) recognized the need for hazard and environmental data analysis and management to support the line managers' need to know, understand, manage and document the hazards in their facilities and activities. The Integrated Safety, Environmental, and Emergency Management System (ISEEMS) was developed in response to this need. SNL needed a process that would quickly and easily determine if a facility or project activity contained only standard industrial hazards and therefore require minimal safety documentation, or if non-standard industrial hazards existed which would require more extensive analysis and documentation. Many facilities and project activities at SNL would benefit from the quick screening process used in ISEEMS. In addition, a process was needed that would expedite the NEPA process. ISEEMS takes advantage of the fact that there is some information needed for the NEPA process that is also needed for the safety documentation process. The ISEEMS process enables SNL line organizations to identify and manage hazards and environmental concerns at a level of effort commensurate with the hazards themselves by adopting a necessary and sufficient (graded) approach to compliance. All hazard-related information contained within ISEEMS is location based and can be displayed using on-line maps and building floor plans. This visual representation provides for quick assimilation and analysis

  16. Is environmental management an economically sustainable business?

    Science.gov (United States)

    Gotschol, Antje; De Giovanni, Pietro; Esposito Vinzi, Vincenzo

    2014-11-01

    This paper investigates whether environmental management is an economically sustainable business. While firms invest in green production and green supply chain activities with the primary purpose of reducing their environmental impact, the reciprocal relationships with economic performance need to be clarified. Would firms and suppliers adjust their environmental strategies if the higher economic value that environmental management generates is reinvested in greening actions? We found out that environmental management positively influences economic performance as second order (long term) target, to be reached conditioned by higher environmental performance; in addition, firms can increase their performance if they reinvest the higher economic value gained through environmental management in green practices: While investing in environmental management programs is a short term strategy, economic rewards can be obtained only with some delays. Consequently, environmental management is an economically sustainable business only for patient firms. In the evaluation of these reciprocal relationships, we discovered that green supply chain initiatives are more effective and more economically sustainable than internal actions. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Burden of industrial waste and potential for recycling: technological, economic and environmental aspects

    Directory of Open Access Journals (Sweden)

    Mihajlović Ivan

    2017-07-01

    Full Text Available Many benefits resulting from the development of the heavy industry are, unfortunately, accompanied by many issues resulting from the process of generating the industrial waste. This manuscript is presenting the environmental consequences, resulting from long period of time of heavy industry production and exploring the possibilities to recycle some of the industrial waste generated during the period of more than one century of ore excavation and copper extraction in the region of Eastern Serbia, in the vicinity of city of Bor. First part of the manuscript is presenting the scope of environmental issues, resulting from the heavy industry in this region and the amounts and the structure of the industrial waste, generated in this area, as well as the influence of generated waste to the environment of the region. Second part of the manuscript is dealing with the potential to recycle and reuse some of this waste, analyzing technological, economic and environmental aspects at the same time. In the final segment of the paper, some practical examples will be addressed based on the research work conducted at both experimental and industrial level. Results presented in the manuscript are mostly collected during long term research of the project team from Technical faculty in Bor, University of Belgrade, in the field of environmental management. This way, this manuscript is based on review of the research papers authored or co-authored by the author of this work, dealing with water, soil and air pollution, published in leading international journals. Also, the manuscript is presenting the literature review of other international issues dealing with the environmental management issues in the vicinity of large industrial complexes. Parts of the research results, presented in this manuscript are financially supported by the Ministry of Education, Science and Technological development of Republic of Serbia, under the project TR34023.

  18. Environmental exposure to arsenic and chromium in an industrial area

    OpenAIRE

    Vimercati, Luigi; Gatti, Maria F; Gagliardi, Tommaso; Cuccaro, Francesco; De Maria, Luigi; Caputi, Antonio; Quarato, Marco; Baldassarre, Antonio

    2017-01-01

    Arsenic and chromium are widespread environmental contaminants that affect global health due to their toxicity and carcinogenicity. To date, few studies have investigated exposure to arsenic and chromium in a population residing in a high-risk environmental area. The aim of this study is to evaluate the exposure to arsenic and chromium in the general population with no occupational exposure to these metals, resident in the industrial area of Taranto, Southern Italy, through biological monitor...

  19. Application of radiation technology for industry and environmental protection

    International Nuclear Information System (INIS)

    Sueo Machi

    1996-01-01

    The world population today is 5.7 billion and increasing by 94 million per year. In order to meet the increasing consumption of food and energy due to the tremendous population growth, unproved technologies which are environmentally friendly, are indispensable. In this context. a number of advanced technologies have been brought about by the LISC of radiation and isotopes. This paper highlights radiation technology, applications in industry, environmental conservation, and agriculture

  20. Responsible Tourism: Environmental Actions in Russian Hotel Industry

    OpenAIRE

    Lumpina, Lolita

    2016-01-01

    The aims of this thesis were to examine the responsible tourism topic, to determine the advantages and disadvantages of the environmental practices in Russian hotel industry and to investigate the reasons and values to follow the environmentally-friendly programs. The thesis includes theoretical and empirical parts. The theoretical section is based on the special literature, studies, researches, articles and online sources. The theoretical part will be divided into two primal headings: re...

  1. Evaluation of the Environmental Performance and rationing of Water Consumption in Industrial Production of Beverages

    Directory of Open Access Journals (Sweden)

    Luciana Miranda Cavalcante

    2013-12-01

    Full Text Available The Amazon region, with a high hydric potential, has attracted companies that require significant volumes of water; therefore, control instruments are necessary to monitor this trend. In this study, the degree of rationing of water use by beverage industries in Para state and the behavior of the sector are discussed. The subjects’ variables were classified according to four study dimensions (environmental management, water management, wastewater management, and advanced measures for rationing that compose the rationing level of water industrial management. The independent variables were associated by size, industry type, packaging used, water availability and the economic value of water. The data show that beverage production has a significant water footprint, higher than 15,250 m3/day, and that small industries have the highest relative consumptions (more than 7 L of water/beverage L. In general, the sector does not ration significant quantities of water; a better result was obtained for water management. However, some more efficient measures could be adopted, especially with regard to water reuse in cooling towers. Analysis of the variables shows that the rationing level is directly dependent on the size of the industry and on the type of product. Consumption tends to be lavish. In response to this situation, public policies should be prioritized to determine the water footprint of products and environmental cost should be considered in the overall cost of production.

  2. Environmental management system case study: textile wet processes

    Energy Technology Data Exchange (ETDEWEB)

    Nasreldin, A A [Engineering Researches and Industrial Technologies Council, Sudan Academy of Sciences, Khartoum (Sudan)

    2008-10-15

    Textile industry is one of the oldest industries, it started very early in the ancient ages, its grows and improves gradually at the first and then rapidly to satisfy other different need of the mankind, even for luxury purposes, this development caused damage to environment, then its need the treatment. Textile wet processes used significant quantities of water and various kind of chemicals marketed under the name textile auxiliaries, to enhance the appearance of the fabric, serviceability, and durability. The chemical contamination of textile wet processes can be a health risk for the mill workers, consumers and for the environment as well. A number of schemes have been proposed in different countries to control the textile wet processes to create better environment and protect the ecosystem from further degradation, the developing countries need to apply their designed policies from the beginning. A theoretical study for probability of application of environmental management system in textile industry, to prevent or eliminate textile industry pollution that considered as one of the largest polluters in Sudanese environment, especially after the government (industrial ministry) support and facilitate to textile industry development. Applying environmental management system can appreciably reduce the textile industry pollution as founded from the study.(Author)

  3. Environmental management system case study: textile wet processes

    International Nuclear Information System (INIS)

    Nasreldin, A.A.

    2008-10-01

    Textile industry is one of the oldest industries, it started very early in the ancient ages, its grows and improves gradually at the first and then rapidly to satisfy other different need of the mankind, even for luxury purposes, this development caused damage to environment, then its need the treatment. Textile wet processes used significant quantities of water and various kind of chemicals marketed under the name textile auxiliaries, to enhance the appearance of the fabric, serviceability, and durability. The chemical contamination of textile wet processes can be a health risk for the mill workers, consumers and for the environment as well. A number of schemes have been proposed in different countries to control the textile wet processes to create better environment and protect the ecosystem from further degradation, the developing countries need to apply their designed policies from the beginning. A theoretical study for probability of application of environmental management system in textile industry, to prevent or eliminate textile industry pollution that considered as one of the largest polluters in Sudanese environment, especially after the government (industrial ministry) support and facilitate to textile industry development. Applying environmental management system can appreciably reduce the textile industry pollution as founded from the study.(Author)

  4. Environmental Sustainability of the Alumina Industry in Western Europe

    Directory of Open Access Journals (Sweden)

    Valentina Dentoni

    2014-12-01

    Full Text Available The implementation of European policies on environmental protection is enforcing some substantial modifications in the processing methods and technologies traditionally adopted in the alumina industry and, in particular, in the management of the alumina residue produced. The article analyses the evolution of the alumina production and the residue disposal practices in Western Europe. Some critical aspects regarding the legal implementation of the EU Directive on the landfill of waste are highlighted and discussed. With reference to the requirements established for the landfill of non-hazardous waste, a key point is represented by the possibility of reducing the deposit protection measures if the collection and treatment of leachate is not necessary. The flexibility introduced by the Directive is not incorporated into the Italian law; this fact may represent a major issue in the prospect of disposal conversion from wet to dry methods for companies operating in Italy, as it may endanger the economic sustainability of the plants’ upgrade, as well as the opportunity to attract outside investments.

  5. Going wild: Environmental stewardship in the energy industry

    International Nuclear Information System (INIS)

    Alexander, C.B.

    1997-01-01

    When Consumers Power Co., Michigan's largest utility, bought the lake plain acreage in St. Clair County, the company valued the land for what was underneath--potential gas storage fields. But that was before the state informed them that they owned the largest remaining stand of old-growth plain forest in Michigan. Growth rings date one hickory tree to 1796, in George Washington's administration; one white oak may date to 1752, one year before the Liberty Bell was hung in the Pennsylvania State House in Philadelphia. Today, while Consumers still owns the site, land preservation management is in the hands of the Michigan Nature Association under a conservation, nondevelopment easement. The industry is making way for wildlife for pragmatic as well as idealistic reasons: Conservation, some say, persuades key audiences of a company's good corporate citizenship, which in turn saves the company time and money when it needs public and/or government support. Other proponents stress that land preservation allows wildlife to flourish and stems the current trend of species extinction. Still another group points to the large-sized carrot coming from environmental groups, which have rolled out the welcome mat to business

  6. Environmental agreements in Canada : Aboriginal participation, EIA follow-up and environmental management of major projects

    Energy Technology Data Exchange (ETDEWEB)

    O' Faircheallaigh, C. [Griffith Univ., Brisbane (Australia). Dept. of Politics and Public Policy

    2006-05-15

    Attempts are now being made to address the historic marginalization of indigenous peoples from the management of resource projects located on their ancestral lands through the use of environmental agreements. However, the rapid pace of resource development in certain regions of Canada has meant that there is an increased need to ensure effective follow-up procedures for Environmental Impact Assessment (EIA) processes in order to achieve meaningful Aboriginal participation in the management of large-scale resource projects. Lack of effective follow-up has made it difficult for the relevant agencies to manage risks and uncertainties. This book discussed the use of new policy environmental agreements between industry, government, and Aboriginal peoples. Case studies where environmental agreements were used in the Northwest Territories, Alberta, and Newfoundland were presented in order to demonstrate their efficacy. It was concluded that structures and processes must be designed to encourage Aboriginal participation in consultation processes. refs., tabs.

  7. Computer technologies for industrial risk prevention and emergency management

    International Nuclear Information System (INIS)

    Balduccelli, C.; Bologna, S.; Di Costanzo, G.; Vicoli, G.

    1996-07-01

    This document provides an overview about problems related to the engineering of computer based systems for industrial risk prevention and emergency management. Such systems are rather complex and subject to precise reliability and safety requirements. With the evolution of informatic technologies, such systems are becoming to be the means for building protective barriers for reduction of risk associated with plant operations. For giving more generality to this document, and for not concentrating on only a specific plant, the emergency management systems will be dealt with more details than ones for accident prevention. The document is organized in six chapters. Chapter one is an introduction to the problem and to its state of art, with particular emphasis to the aspects of safety requirements definition. Chapter two is an introduction to the problems related to the emergency management and to the training of operators in charge of this task. Chapter three deals in details the topic of the Training Support Systems, in particular about MUSTER (multi-user system for training and evaluation of environmental emergency response) system. Chapter four deals in details the topic of decision support systems, in particular about ISEM (information technology support for emergency management) system. Chapter five illustrates an application of support to the operators of Civil Protection Department for the management of emergencies in the fields of industrial chemical. Chapter six is about a synthesis of the state of art and the future possibilities, identifying some research and development activities more promising for the future

  8. Analysis of Information Sharing Mechanism in the Food Industry Green Supply Chain Management and Operation Process

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    In order to effectively address the issues of environmental pollution and food safety in food industry,the green supply chain management should be used in the food industry.However,information sharing is the basis of supply chain management.For this purpose,on the basis of describing the connotation of food industry green supply chain management,the paper introduces the contents and the effects of information sharing mode in detail.It focuses on the barriers of the implementation of information-sharing mechanisms in the food industry green supply chain management and operation process and analyzes the necessity of using information sharing mechanism among the members of the food industry green supply chain management mode by game theory,so as to strengthen the competitiveness of enterprises through supply chain management.

  9. Environmental issues in operations management

    Science.gov (United States)

    Muthulingam, Suresh

    Adoption of sustainable operating practices is becoming an increasingly important issue for many organizations in the world today. In this dissertation, I use empirical methods to investigate factors that influence the adoption of sustainable practices and also identify issues that may hinder the adoption of such practices. I explore these issues in two diverse settings. In Chapter 1, I investigate the adoption and non-adoption of energy efficiency initiatives using a database of over 100,000 recommendations provided to more than 13,000 small and medium sized manufacturing firms. Even though the average payback across all recommendations is just over one year, many of these profitable opportunities are not implemented. Using a probit instrumental variable model, I identify four biases in the adoption of these recommendations. First, managers are myopic as they miss out on many profitable opportunities. Second, managers are more influenced by upfront costs than by net benefits when evaluating such initiatives. Third, adoption of a recommendation depends not only on its characteristics but also on the sequence in which the recommendations are presented. Adoption rates are higher for initiatives appearing early in a list of recommendations. Finally, adoption is not influenced by the number of options provided to decision makers. This contributes to the debate about whether or not choice overload occurs. We highlight decision biases previously unobserved in the Operations Management literature using field data rather than experimental data. We draw implications for enhancing adoption of energy efficiency initiatives and for other decision contexts where a collection of process improvement recommendations are made to firms. In Chapter 2, I examine the depth of adoption of the voluntary LEED (Leadership in Energy and Environmental Design) standards for green buildings. Depth of adoption refers to the extent to which the buildings adopt practices related to the standard

  10. Environmental agreements, EIA follow-up and aboriginal participation in environmental management: The Canadian experience

    International Nuclear Information System (INIS)

    O'Faircheallaigh, Ciaran

    2007-01-01

    During the last decade a number of environmental agreements (EAs) have been negotiated in Canada involving industry, government and Aboriginal peoples. This article draws on the Canadian experience to consider the potential of such negotiated agreements to address two issues widely recognised in academic and policy debates on environmental impact assessment (EIA) and environmental management. The first relates to the need to secure indigenous participation in environmental management of major projects that affect indigenous peoples. The second and broader issue involves the necessity for specific initiatives to ensure effective follow-up of EIA. The Canadian experience indicates that negotiated environmental agreements have considerable potential to address both issues. However, if this potential is to be realized, greater effort must be made to develop structures and processes specifically designed to encourage Aboriginal participation; and EAs must themselves provide the financial and other resource required to support EIA follow-up and Aboriginal participation

  11. The Role of ISO 9000 Certification on Waste Management of Leather Industry

    International Nuclear Information System (INIS)

    Susetyo Hario Putero; Dhani Astuti

    2008-01-01

    State of industry in an area could increase economy of this area. On the other hand, industry may be produce the waste. There are many factor influencing the success of industrial waste management. At present, ISO 14000 is known as an international environmental management standard. Practically, several matter required for ISO 14000 are similar with ISO 9000. So, the role of ISO 9000 certification on supporting waste management program of leather industry has been studied. Study has been pursued by comparing the environmental management systems of 2 leather industries in Sitimulyo, Piyungan, Bantul. Staff working way has been observed to know the suitability with working procedures and implementation of safety aspect on daily working. Observation of waste treatment facility and measurement of Chrome concentration also has been done. Samples were analysed using AAS method in Department of Chemistry, Faculty of Mathematics and Natural Science, Gadjah Mada University. Decontamination Factor (DF) was calculated by comparing the Chrome concentrations on outside plant and in waste treatment facility. Commitment of management and orderliness of system as required on ISO 9000 certification could push the industry to well execute waste management program as a part of environmental management system. ISO 9000 certification is convinced to make awareness of industry grow for continually improving their capability, including their capacity of waste treatment facility. (author)

  12. Semiconductor industry wafer fab exhaust management

    CERN Document Server

    Sherer, Michael J

    2005-01-01

    Given the myriad exhaust compounds and the corresponding problems that they can pose in an exhaust management system, the proper choice of such systems is a complex task. Presenting the fundamentals, technical details, and general solutions to real-world problems, Semiconductor Industry: Wafer Fab Exhaust Management offers practical guidance on selecting an appropriate system for a given application. Using examples that provide a clear understanding of the concepts discussed, Sherer covers facility layout, support facilities operations, and semiconductor process equipment, followed by exhaust types and challenges. He reviews exhaust point-of-use devices and exhaust line requirements needed between process equipment and the centralized exhaust system. The book includes information on wet scrubbers for a centralized acid exhaust system and a centralized ammonia exhaust system and on centralized equipment to control volatile organic compounds. It concludes with a chapter devoted to emergency releases and a separ...

  13. Environmental Management Science Program Workshop. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    None

    1998-07-01

    The Department of Energy Office of Environmental Management (EM), in partnership with the Office of Energy Research (ER), designed, developed, and implemented the Environmental Management Science Program as a basic research effort to fund the scientific and engineering understanding required to solve the most challenging technical problems facing the government's largest, most complex environmental cleanup program. The intent of the Environmental Management Science Program is to: (1) Provide scientific knowledge that will revolutionize technologies and cleanup approaches to significantly reduce future costs, schedules, and risks. (2) Bridge the gap between broad fundamental research that has wide-ranging applications such as that performed in the Department's Office of Energy Research and needs-driven applied technology development that is conducted in Environmental Management's Office of Science and Technology. (3) Focus the nation's science infrastructure on critical Department of Energy environmental problems. In an effort to share information regarding basic research efforts being funded by the Environmental Management Science Program and the Environmental Management/Energy Research Pilot Collaborative Research Program (Wolf-Broido Program), this CD includes summaries for each project. These project summaries, available in portable document format (PDF), were prepared in the spring of 1998 by the principal investigators and provide information about their most recent project activities and accomplishments.

  14. Carbon footprint as environmental performance indicator for the manufacturing industry

    DEFF Research Database (Denmark)

    Laurent, Alexis; Olsen, Stig Irving; Hauschild, Michael Zwicky

    2010-01-01

    With the current focus on our climate change impacts, the embodied CO2 emission or "Carbon footprint" is often used as an environmental performance indicator for our products or production activities. The ability of carbon footprint to represent other types of impact like human toxicity, and hence...... the overall environmental impact is investigated based on life cycle assessments of several materials of major relevance to manufacturing industries. The dependence of the carbon footprint on the assumed scenarios for generation of thermal and electrical energy in the life cycle of the materials is analyzed......, and the appropriateness of carbon footprint as an overall indicator of the environmental performance is discussed....

  15. Managing environmental and health impacts of uranium mining

    Energy Technology Data Exchange (ETDEWEB)

    Vance, R.E.; Cameron, R., E-mail: robert.vance@oecd.org, E-mail: ron.cameron@oecd.org [OECD Nuclear Energy Agency (France)

    2014-07-01

    As the raw material that fuels nuclear power plants that generate significant amounts of electricity with full life cycle carbon emissions as low as renewable energy sources, uranium is a valuable commodity. Yet uranium mining remains controversial, principally because of environmental and health impacts created when mining was undertaken by governments to meet Cold War strategic requirements. Uranium mining is conducted under significantly different circumstances today. Since the era of military production, societal expectations of environmental protection and the safety of workers and the public have evolved as the outcomes of the early era of mining became apparent, driving changes in regulatory oversight and mining practices. Key aspects of leading practice uranium mining are presented (conventional worker health and safety, worker radiation protection, public health and safety, water quality, tailings and waste rock management) and compared with historic practices to demonstrate the scale of differences. The application of additional aspects of uranium mine life cycle management (public consultation, environmental impact assessment, analysis of socio-economic impacts/benefits, environmental monitoring, financial assurance, product transport, security and safeguards, emergency planning and knowledge transfer), introduced as the industry matured, enhance overall management practices for the long term. Results from several case studies show that improved management of key aspects of uranium mining, combined with the incorporation of new life cycle parameters, have transformed the industry into the most regulated and arguably one of the safest and environmentally responsible types of mining in the world. (author)

  16. Industrial pollution of the Moselle River: the birth, development and management of an environmental problem, 1850-2000; La pollution industrielle de la Moselle francais: naissance, developpement et gestion d'un probleme environnemental, 1850-2000

    Energy Technology Data Exchange (ETDEWEB)

    Garcier, J.R

    2005-12-15

    In the 1850's, the water quality of surface waters in the Moselle river drainage basin began to suffer from the development of heavy industrial activities (coal and iron ore mining, steel and soda making). Industrial development also fuelled a demographic impetus that proved detrimental to the quality of surface waters. This study uses archival sources to analyse the ineffectiveness of the policies that were launched to regulate pollution. In a region traumatized by the Prussian annexation of a quarter of its surface (1870), industrial production enjoyed a symbolic protection that allowed water pollution to go unabated. The fuzzy status of pollution in law contributed to the immunity of industrialists. From the 1950's on, fear that the region might experience severe water shortages due to the growth of water consumption by industries and cities alike enabled more stringent policies to be devised. They still had to take into account the interests of the heavy industry and their effectiveness is questionable. Hydrological planning was based upon a functionalist vision of water resources that did not take environmental issues into account. The situation changed in the 1970's and 1980's, when European integration and the Sandoz catastrophe in the Rhine (November 1986) tipped the scale in favour of more vigorous environmental policies. This study develops the concepts of a 'regional system' and of the 'mode of construction' of an environmental problem. These prove to be valuable theoretical elements to ground environmental geography studies. (author)

  17. Waste management - an integral part of environmental management systems

    Energy Technology Data Exchange (ETDEWEB)

    Hamm, Ulrich

    1998-12-01

    To consider waste as a resource instead of an annoyance with which the management has to cope with, has become an unavoidable task for modern managers. The task the management has to take to secure competitiveness in an environment of rising complexity of production processes and further increasing legal requirements, is to manage waste as much as other recourses are managed. Waste has to be considered an aspect of planning and decision process just as business plans or logistics are. Main themes discussed in this publication comprise waste management, implementation of waste management as an integral part of environmental management systems, and management approach to waste - the results. 4 figs.

  18. Manual control models of industrial management

    Science.gov (United States)

    Crossman, E. R. F. W.

    1972-01-01

    The industrial engineer is often required to design and implement control systems and organization for manufacturing and service facilities, to optimize quality, delivery, and yield, and minimize cost. Despite progress in computer science most such systems still employ human operators and managers as real-time control elements. Manual control theory should therefore be applicable to at least some aspects of industrial system design and operations. Formulation of adequate model structures is an essential prerequisite to progress in this area; since real-world production systems invariably include multilevel and multiloop control, and are implemented by timeshared human effort. A modular structure incorporating certain new types of functional element, has been developed. This forms the basis for analysis of an industrial process operation. In this case it appears that managerial controllers operate in a discrete predictive mode based on fast time modelling, with sampling interval related to plant dynamics. Successive aggregation causes reduced response bandwidth and hence increased sampling interval as a function of level.

  19. Tracking the evolution in corporate environmental performance in Danish industry

    DEFF Research Database (Denmark)

    Ulhøi, John Parm; Madsen, Henning

    2014-01-01

    to answer how stakeholders' perceived influence develops over time and whether those changes affect firms' environmental activities. Starting in 1995, and every fourth year following, we distributed a pre-tested structured questionnaire to a random sample of small and medium-sized industrial firms...

  20. Environmental monitoring program for Itataia industrial complex before operational phase

    International Nuclear Information System (INIS)

    Condessa, M.L.M.B.

    1982-01-01

    This environmental monitoring program aims to characterize the environment in adjacent area of Itataia Industrial Complex. The places and frequencies of samples and measurements, as well as analysis and parameters to be measured in each type of samples are presented. (C.M.) [pt

  1. Lead Polluted Hotspot: Environmental Implication of Unplanned Industrial Development

    Directory of Open Access Journals (Sweden)

    Rikta Sharmin Yousuf

    2016-06-01

    Full Text Available In Rayer Bazaar, different industries like tannery, plastic, textile, battery recycling industry etc. are increasing rapidly without considering the environmental issues and deterioration. Since chromium (Cr pollution of this area has been widely investigated due to the presence of tannery industries, this study was focused on examining other environmental factors. Field visits and analytical results of semi-quantitative and quantitative analysis as well as three dimensional excitation emission matrix spectroscopy (3DEEM of water, soil and vegetative tissues indicated that, the area is highly polluted in term of different environmental parameters and metal content. The extremely high lead (Pb content of the soil (1171.7 mg/kg in summer, 2157.1 mg/kg in winter and blackish materials of vegetative tissues (6585.6 mg/kg in summer, 1974.1 mg/kg in winter indicates excessive lead deposition of this area that makes it a lead polluted hotspot. One of the possible sources of the extremely high lead concentration is adjacent battery recycling industry and/or other industries surrounding this area. So it is urgent to take necessary steps to find out immediate options for possible mitigation.

  2. Environmental aspects of commercial radioactive waste management

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-01

    Environmental effects (including accidents) associated with facility construction, operation, decommissioning, and transportation in the management of commercially generated radioactive waste were analyzed for plants and systems assuming a light water power reactor scenario that produces about 10,000 GWe-yr through the year 2050. The following alternative fuel cycle modes or cases that generate post-fission wastes requiring management were analyzed: a once-through option, a fuel reprocessing option for uranium and plutonium recycle, and a fuel reprocessing option for uranium-only recycle. Volume 1 comprises five chapters: introduction; summary of findings; approach to assessment of environmental effects from radioactive waste management; environmental effects related to radioactive management in a once-through fuel cycle; and environmental effects of radioactive waste management associated with an LWR fuel reprocessing plant. (LK)

  3. Environmental aspects of commercial radioactive waste management

    International Nuclear Information System (INIS)

    1979-05-01

    Environmental effects (including accidents) associated with facility construction, operation, decommissioning, and transportation in the management of commercially generated radioactive waste were analyzed for plants and systems assuming a light water power reactor scenario that produces about 10,000 GWe-yr through the year 2050. The following alternative fuel cycle modes or cases that generate post-fission wastes requiring management were analyzed: a once-through option, a fuel reprocessing option for uranium and plutonium recycle, and a fuel reprocessing option for uranium-only recycle. Volume 1 comprises five chapters: introduction; summary of findings; approach to assessment of environmental effects from radioactive waste management; environmental effects related to radioactive management in a once-through fuel cycle; and environmental effects of radioactive waste management associated with an LWR fuel reprocessing plant

  4. Quality management certification for the nuclear industry

    International Nuclear Information System (INIS)

    Wilmer, T.J.

    1993-01-01

    Historically for safety critical items, the United Kingdom nuclear companies either conducted their own inspection and audit of suppliers or sub-contracted staff to do so on their behalf. However, it is becoming unrealistic for these services to be undertaken in-house for economic reasons. The power industry is looking outside its own immediate expertise to that of 3rd Party Certification Bodies. There is a danger of introducing an element of risk unless the Certification Body really does understand the industry and its requirements. The Nuclear Installations Inspectorate (NII) makes it mandatory for nuclear installations to have in place Quality management systems that meet the requirements of BS 5882. This standard requires the use of quality assurance programmes and a greater degree of understanding of nuclear regulations and codes of practice than is required by BS 5750. This is a very significant factor, recognising as it does the need to harmonise the management interface between an operator of a nuclear installation and suppliers to that same installation. (author)

  5. How the environmental community views the mining industry

    International Nuclear Information System (INIS)

    Maest, A.

    1990-01-01

    Working with the Environmental Mining Network, a coalition of ∼75 environmental groups nationwide formed to encourage environmentally-sound hard-rock mining. Emphasis is on changing the industrial process so that wastes are not created in the first place, instead of creating the wastes and dealing with them as an afterthought. The tradition of pollution control is slowly being replaced with prevention. Objectives of pollution prevention for mining include: Reduction of the volume of material extracted, beneficiated, processed, and removed for exploration by improving techniques for these processes, mining less, and encouraging remining and use of scrap materials; Reduction of the toxicity and environmental impact of wastes that are nonetheless generated by employing techniques that minimize the release of contaminants to the environment; Identifying current and developing technologies for pollution prevention in the mining industry and distribute this among the regulated community. Pollution prevention should be incorporated in design and performance standards. Assessment and demonstration of pollution prevention should be part of the permit application. Implementation of serious non-rhetorical pollution prevention by the mining industry has the potential to give miners and environmentalists a common ground and common goals where we could truely be in a win-win situation in terms of encouraging both environmental and economic robustness

  6. Solid waste management in the hospitality industry: a review.

    Science.gov (United States)

    Pirani, Sanaa I; Arafat, Hassan A

    2014-12-15

    Solid waste management is a key aspect of the environmental management of establishments belonging to the hospitality sector. In this study, we reviewed literature in this area, examining the current status of waste management for the hospitality sector, in general, with a focus on food waste management in particular. We specifically examined the for-profit subdivision of the hospitality sector, comprising primarily of hotels and restaurants. An account is given of the causes of the different types of waste encountered in this sector and what strategies may be used to reduce them. These strategies are further highlighted in terms of initiatives and practices which are already being implemented around the world to facilitate sustainable waste management. We also recommended a general waste management procedure to be followed by properties of the hospitality sector and described how waste mapping, an innovative yet simple strategy, can significantly reduce the waste generation of a hotel. Generally, we found that not many scholarly publications are available in this area of research. More studies need to be carried out on the implementation of sustainable waste management for the hospitality industry in different parts of the world and the challenges and opportunities involved. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Revealing Adaptive Management of Environmental Flows

    Science.gov (United States)

    Allan, Catherine; Watts, Robyn J.

    2018-03-01

    Managers of land, water, and biodiversity are working with increasingly complex social ecological systems with high uncertainty. Adaptive management (learning from doing) is an ideal approach for working with this complexity. The competing social and environmental demands for water have prompted interest in freshwater adaptive management, but its success and uptake appear to be slow. Some of the perceived "failure" of adaptive management may reflect the way success is conceived and measured; learning, rarely used as an indicator of success, is narrowly defined when it is. In this paper, we document the process of adaptive flow management in the Edward-Wakool system in the southern Murray-Darling Basin, Australia. Data are from interviews with environmental water managers, document review, and the authors' structured reflection on their experiences of adaptive management and environmental flows. Substantial learning occurred in relation to the management of environmental flows in the Edward-Wakool system, with evidence found in planning documents, water-use reports, technical reports, stakeholder committee minutes, and refereed papers, while other evidence was anecdotal. Based on this case, we suggest it may be difficult for external observers to perceive the success of large adaptive management projects because evidence of learning is dispersed across multiple documents, and learning is not necessarily considered a measure of success. We suggest that documentation and sharing of new insights, and of the processes of learning, should be resourced to facilitate social learning within the water management sector, and to help demonstrate the successes of adaptive management.

  8. Environmental monitoring of water Sources LNEC final report of Marie Curie Transfer of Knowledge Action - Development of strategic academia-industry partnership in Romania for knowledge management in environmental friendly technologies “KnowEnTech”

    OpenAIRE

    Terceiro, P.

    2009-01-01

    Este registo pertence ao Repositório Científico do LNEC The present report contains a brief description of a two month stage in Bucharest, Romania, completed by the researcher Ana Patricia de Freitas Terceiro, from 4th of January until 28th of February 2009. The main activity developed during the stage consisted on writing the book entitled “Environmental monitoring of water sources” (authors: Patricia Terceiro, Rodica Ceclan, Ionel Popa, Virgil Racicovschi, Aurelia Meghea), al...

  9. Ownership and environmental regulation: Evidence from the European electricity industry

    International Nuclear Information System (INIS)

    Clò, Stefano; Ferraris, Matteo; Florio, Massimo

    2017-01-01

    The paper investigates how ownership affects the environmental performance in developed countries where environmental regulation is introduced in the form of market-based instrument. By looking at a cross-country panel dataset of 29 power markets around Europe over the period 1990–2012, we find empirical evidence that an increase of public ownership, as measured by the OECD ETCR index, is associated with a reduction of both greenhouse gas emissions and carbon intensity. We also find that the implementation of the European Emissions Trading Scheme (ETS) had a limited impact on emissions' reduction due to lax allocation of allowances. The positive effect of public ownership on environmental performance has been significant even after the introduction of the ETS, giving additional incentives to mitigate emissions when the ETS cap was not stringent enough. This evidence suggests that government control over power companies in Europe can has created idiosyncratic incentives to improve environmental quality, complementing environmental regulation in the achievement of environmental goals when the latter was absent or sub-optimal. - Highlights: • We analyse the power industry's environmental performance in 29 European countries. • Public ownership is associated with lower emissions than private ownership. • Mixed oligopoly is superior to private oligopoly in environmental terms. • The ETS had a limited impact on emissions' reduction due to over-allocation. • Public ownership mitigates the effects of sub-optimal environmental regulation.

  10. Environmental noise management in the area of opencast mines

    Directory of Open Access Journals (Sweden)

    Lilić Nikola

    2017-01-01

    Full Text Available Environmental noise constitutes a threat regarding disturbance and deterioration of quality of living. There are numerous sources of environmental noise, among others mine objects, traffic roads etc. In Serbian practice open cast mines are commonly in vicinity of residential areas, which is the case of the Field C open cast coal mine and the Barosevac settlement. More complexity is added to noise management in such conditions through additional noise sources, not directly linked to mine objects and activities, such as local or regional roads. This paper describes an approach to noise management for the purpose of environmental noise impact reduction, from both traffic and industrial sources, related to the project Environmental Improvement Project in Kolubara Mine Basin in Barosevac settlement, as a part of acquisition of new Excavator-belt Conveyor-Stacker (ECS system.

  11. Comparative analysis of energy impacts of traditional and partly electronic environmental auditing: Learning from the Japanese automotive industry case

    OpenAIRE

    Mbohwa, C

    2008-01-01

    This paper does a comparative analysis and assessment of energy impacts of traditional and partly electronic ISO 14001 environmental management system auditing that using videoconferencing systems. The focus is on the Japanese automotive industry. The idea is to quantify the environmental impacts of auditing and resolve the important question on whether or not the use of information and communication technology (ICT) in environmental auditing reduces environmental impacts in IS...

  12. The environmental management of oil tanker routes in UK waters

    Energy Technology Data Exchange (ETDEWEB)

    Owen, J. [University of Wales, Cardiff (United Kingdom). Dept. of Maritime Studies and International Transport

    1999-09-01

    The recent Haven, Aegean Sea and Sea Empress incidents have highlighted the need for protective measures against the risks posed by the shipping industry to the UK coast. This is particularly the case in the vicinity of environmentally sensitive areas. The principal objectives of this paper are to investigate the state of environmental management of tanker traffic in the UK by putting the geography of shipping into its environmental context. Regional traffic levels, accident rates, oil spills, and their potential consequences upon the environment have been summarised via a risk assessment which also considers coastal sensitivity. An assessment of measures available at international level then sets the scene for a review of marine traffic management schemes in operation around the UK. The state of management and its approaches are also discussed and a number of recommendations put forward during marine conferences in the last twelve months are considered.

  13. The environmental management of oil tanker routes in UK waters

    International Nuclear Information System (INIS)

    Owen, J.

    1999-01-01

    The recent Haven, Aegean Sea and Sea Empress incidents have highlighted the need for protective measures against the risks posed by the shipping industry to the UK coast. This is particularly the case in the vicinity of environmentally sensitive areas. The principal objectives of this paper are to investigate the state of environmental management of tanker traffic in the UK by putting the geography of shipping into its environmental context. Regional traffic levels, accident rates, oil spills, and their potential consequences upon the environment have been summarised via a risk assessment which also considers coastal sensitivity. An assessment of measures available at international level then sets the scene for a review of marine traffic management schemes in operation around the UK. The state of management and its approaches are also discussed and a number of recommendations put forward during marine conferences in the last twelve months are considered

  14. Analysis of the environmental and economic indicators of the industrial enterprise

    Science.gov (United States)

    Mikhailov, V. G.; Kiseleva, T. V.

    2018-05-01

    In the paper the features of the analysis of the environmental and economic indicators of the industrial enterprise are considered. The purpose of the study is to improve the system of environmental and economic analysis at the enterprise for more accurate forecasting of its main environmental and economic indicators. The study of the main approaches to the implementation of environmental and economic analysis based on the corresponding systems of indicators with identification of the most significant factors was carried out. The main result of the study is the choice of a system for analyzing the environmental and economic indicators, maximally oriented to a specific enterprise, taking into account its production specific features. The practical significance of the study consists in the selection of an adequate system of indicators at enterprises to improve the effectiveness from preparation of an environmentally safe management decision.

  15. Environmental management best practices: towards social innovation

    OpenAIRE

    Batle, Julio; Orfila-Sintes, Francina; Moon, C. J.

    2018-01-01

    This research investigates exploratory environmental initiatives in tourism companies in Mallorca over five years, with special consideration to those involving partnerships and synergies with other parties (including academic ones), in an exploration of Social Innovation (SI) approaches in the industry. The paper starts with an outline of the growing importance of sustainability within the hospitality industry and its inherent relation with SI. The study draws its empirical material from ten...

  16. Economic environmental management of drilling operations

    International Nuclear Information System (INIS)

    Longwell, H.J.; Akers, T.J.

    1992-01-01

    This paper presents significant environmental and regulatory initiatives developed by Exxon's New Orleans Drilling Organization. Specifically, the paper will cover drilling waste minimization techniques and disposal options, recycling of drilling waste streams, and environmentally managed drilling location design considerations. The implementation of some of these initiatives at Exxon's Chalkley field land locations have resulted in a fifty percent reduction in drilling location waste management costs. Some of these same initiatives have been successfully applied to Exxon's barge drilling locations. For operations at the environmentally sensitive Mobile Bay, Exxon contracted with a local company and assisted in the development of an economically and environmentally superior drilling waste disposal and treatment system. In summary, it is possible for drilling operators to pro-actively manage escalating environmental and regulatory challenges through the implementation of economic and practical initiatives

  17. Implications of pollution prevention experience for environmental management

    International Nuclear Information System (INIS)

    Schramm, W.

    1993-01-01

    Conventional wisdom in the US is that firms face a trade-off between environmental efforts and profit because of the belief that environmental protection invariably involves costs that reduce profits. Firms, therefore, generally perceive environmental protection as an impediment to their goal of profit maximization. Environmental efforts are viewed as an added hurdle in producing a product, rather than an as intrinsic part of well-designed operations. From this perspective, firms have no incentive to engage in environmental protection efforts, and will do so only if they are forced (or are given incentives) by government or if they perceive in advance potential profits from their efforts (e.g., a market for environmental products). The concept of a trade-off between the environment and profit, however, has been challenged recently. A common argument raised for questioning this trade-off is that efforts directed at environmental protection will lead to the development of new technologies and will give US firms a competitive advantage in the emerging environmental industry. It is argued that opportunities available within this growth field outweigh costs of entry and research. Recent publications (World Wildlife Fund, 1992; Resources for the Future, 1993) have proposed that government actions, may encourage the development of the environmental industry and, thus, improve both economic and environmental performance. Suggested governmental actions include using market incentives rather than command and control regulation to achieve environmental goals, integrating environmental values into governmental policy analysis, and supporting investments in environmental technologies. This paper details the economics and benefits of various waste management efforts

  18. Analysis of the State of Operation Management at Industrial Enterprises

    OpenAIRE

    Zakharov Vladimir A.; Ivanova Valentina I.

    2013-01-01

    The article analyses operation management at industrial enterprises of the Kharkiv region, identifies main problems and offers ways of improvement of the quality of operation management at industrial enterprises of Ukraine. It marks out the factors of the competitive environment of the operation system, which exert significant influence on operation management of an industrial enterprise. It builds a diagram of problems and a tree of goals of elimination of problems of operation management.Пр...

  19. Sustainability Reporting in Fishing Industry Management - Regulation versus Voluntarism

    Directory of Open Access Journals (Sweden)

    Susan Wild

    2008-09-01

    Full Text Available A growing number of major corporations and industry organizations now overtly advocate thegeneral concept of corporate social and environmental responsibility, commonly emphasising the‘business case’ for such behaviour on the basis that it is ‘good for business’. Many now report totheir stakeholders on a voluntaristic basis a range of information regarding their impacts on thesocial and physical environment in which they operate.Intrinsic to the business case model is the argument that an optimal balance between the needs ofeconomic growth and the sustainable management of natural resources can best be attainedthrough the conventional mechanisms of corporate governance and voluntary corporate activity,rather than by imposition of governmental regulation. This view implies, however, that wherethe exigencies of environmental sustainability conflict with those of economic imperatives, thelatter must take precedence.A view oppositional to that of the business case instead promotes an intensified interventionistapproach towards natural resource management, advocating increased governmental regulationand control, including the mandating, standardization and independent verification of corporatesustainability reporting. This view gives precedence to public good concepts of natural resourcemanagement, prioritising intra- and inter-generational equity and human rights theories as tonatural resource distribution, and challenges traditional economic approaches to the relationalintersects of business, politics and environment science.This paper considers the relative claims for efficacy in achieving desirable corporateenvironmental behaviours of the business case and voluntary self-regulation model, vis-à-visthose for extended mandatory governmental control, utilizing the exemplar of voluntarysustainability reporting in the New Zealand fishing industry.

  20. Environmental Response Management Application (ERMA®) Pacific Islands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Environmental Response Management Application (ERMA®) is a web-based Geographic Information System (GIS) tool that assists both emergency responders and...

  1. Ethiopian Journal of Environmental Studies and Management

    African Journals Online (AJOL)

    The Ethiopian Journal of Environmental Studies and Management (EJESM) is based in ... Remote sensing and gis applications in determining shoreline and surface ... Assessment Of Labile Metals In Effluents From Lubricating Oil Company In ...

  2. Corporate environmental management and information technology

    DEFF Research Database (Denmark)

    Rikhardsson, Pall M.

    2001-01-01

    software, the Internet, computer networks, telecommunications devices, etc. Information technology also has an impact on how companies perform environmental management. This paper looks at the relations between corporate environmental management and information technology. First it presents a framework...... for mapping information technology. Using this framework it focuses on the use of information technology in corporate environmental management, describes the market for standard environmental management information systems and implementation experiences from one large international company.......Information technology has changed, is changing and will continue to change the face of business as we further enter the Information Society. Today it would be difficult for a company to function effectively without the aid of various information technologies such as accounting software, production...

  3. Corporate Environmental Management and Information Technology

    DEFF Research Database (Denmark)

    Rikhardsson, Pall M.

    2000-01-01

    software, the internet, computer networks, telecommunications devices, etc. Information technology also has an impact on how companies perform environmental management. This paper explores the relations between environmental management and information technology in general terms. It offers a classification...... framework for the use of information technology in corporate environmental management (CEM), describes the market for standard environmental management information systems solutions, what main functionalities are available and what main trends are visible.......Information technology has changed, is changing and will continue to change the face of business as we further enter the Information Society. Today it would be difficult for a company to function effectively without the aid of various information technologies such as accounting software, production...

  4. Environmental Response Management Application (ERMA®) Pacific Northwest

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Environmental Response Management Application (ERMA®) is a web-based Geographic Information System (GIS) tool that assists both emergency responders and...

  5. Journal of Applied Sciences and Environmental Management

    African Journals Online (AJOL)

    Journal of Applied Sciences and Environmental Management. ... Impacts of Organic Wastes on Water Quality of Woji Creek in Port Harcourt, Nigeria ... of Old Netim Village in Akamkpa Local Government Area of Cross River State, Nigeria ...

  6. Environmental Response Management Application (ERMA®), Great Lakes

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Environmental Response Management Application (ERMA®) is a web-based Geographic Information System (GIS) tool that assists both emergency responders and...

  7. Challenges of solid waste management and environmental ...

    African Journals Online (AJOL)

    Challenges of solid waste management and environmental sanitation in Ibadan North ... African Journal for the Psychological Study of Social Issues ... inadequate manpower and welfare, poor provision of health services, negative attitudes, ...

  8. Journal of Applied Sciences and Environmental Management ...

    African Journals Online (AJOL)

    Journal of Applied Sciences and Environmental Management. ... Types Of Contributions. Original research papers; review articles; case studies and short communications. 3. Copyright ... Example: Chukwu, M; Olusegun, AW; Mohammed, SSD.

  9. A Study on the Evaluation of Industrial Solid Waste Management ...

    African Journals Online (AJOL)

    Industrial solid waste is a serious health concern in Aba, South East Nigeria. This study was undertaken to assess the approaches of some industries toward some aspects of waste management in Aba. Interviews, observation and questionnaires administered to industry executives and waste managers were used to ...

  10. US - Former Soviet Union environmental management activities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Office of Environmental Management (EM) has been delegated the responsibility for US DOE`s cleanup of nuclear weapons complex. The nature and the magnitude of the waste management and environmental remediation problem requires the identification of technologies and scientific expertise from domestic and foreign sources. This booklet makes comparisons and describes coordinated projects and workshops between the USA and the former Soviet Union.

  11. ISO 14001 Environmental Management System and The Application to The Copper Sector

    Directory of Open Access Journals (Sweden)

    İrfan ERTUĞRUL

    2013-12-01

    Full Text Available This study presents firstly Environmental Management and Environmental Management Systems (EMS. The certification process of ISO 14001 EMS is described in the Copper Industry that begin the environmental activities by completely considering environment. Evaluating the environmental impacts of business, it is presented the process including EMS so as to dispose of waste, the creation of process, the application difficulties and the benefits of EMS.

  12. Ethiopian Journal of Environmental Studies and Management

    African Journals Online (AJOL)

    ... Ethiopian Journal of Environmental Studies and Management (EJESM) is based in the Department of Geography and Environmental Studies, Bahir Dar University, Ethiopia. Its aim is to publish original research output in the area of Geography, Ecology, Botany, Conservation studies, Food and Nutrition, Water Resources, ...

  13. Environmental Management Guide for Educational Facilities

    Science.gov (United States)

    APPA: Association of Higher Education Facilities Officers, 2017

    2017-01-01

    Since 1996, APPA and CSHEMA, the Campus Safety Health and Environmental Management Association, have collaborated to produce guidance documents to help educational facilities get ahead of the moving target that is environmental compliance. This new 2017 edition will help you identify which regulations pertain to your institution, and assist in…

  14. 77 FR 67808 - Environmental Management Advisory Board Meeting

    Science.gov (United States)

    2012-11-14

    ... DEPARTMENT OF ENERGY Environmental Management Advisory Board Meeting AGENCY: Department of Energy. ACTION: Notice of Open Meeting. SUMMARY: This notice announces a meeting of the Environmental Management... Assistant Secretary for Environmental Management (EM) with advice and recommendations on corporate issues...

  15. Environmental and community issues and the mining industry

    International Nuclear Information System (INIS)

    Crowson, P.

    1998-01-01

    Much has been said and written in recent years about the greatly increased difficulties faced by the mining industry in meeting the expectations of local communities and in adequately protecting the natural environment. The impression is often given that the industry was completely oblivious of such concerns and needs until the present decade, and that it is now struggling to make up for past neglect. Certainly the standards required by society as a whole have risen, and there is more public discussion that in earlier times, but the management of many major mining companies have long been fully aware of their obligations to the environment and local communities. To argue otherwise would be to misread the history of the industry and to perform a grave disservice to many dedicated managers of the mining projects of former years. (author)

  16. Environmentally sound development in the energy and mining industries

    International Nuclear Information System (INIS)

    1987-01-01

    The paper contains the proceedings of a seminar on Strategies for Environmentally Sound Development in the Energy and Mining Industries, Crete, 1984. The seminar was structured around the following themes: 1) oil and gas exploration and production, 2) water power generation and storage projects, 3) electricity generating facilities, 4) restoration and after-use of disturbed land, 5) mineral development, 6) mineral and energy resources in fragile and remote ecosystems, and 7) general environmental issues. Two papers from the seminar were chosen and indexed separately. (U.K.)

  17. Environmental practices of the auxiliary companies to the Spanish automobile industry

    Science.gov (United States)

    González-Torre, Pilar L.; González, Beatriz A.; Gupta, Surendra M.

    2005-11-01

    The automobile manufacturing industry plays a very important role in a country's economy. The importance of automobile manufacturing industry lies in its sheer size and complexity in terms of the direct and indirect influence it commands across many other industries. While millions of people are employed in the automobile manufacturing industry, it is estimated that more than two and half times that number are employed in the auxiliary companies that supply parts to the automobile manufacturing companies. The auxiliary companies represent a group of businesses of various sizes, types, and geographical locations, producing a vast variety of products ranging from the very simple to the extremely intricate. In this study, the current environmental practices of management in the core Spanish auxiliary companies that do business with the automobile manufacturing industry (and thus form a large part of the automobile manufacturing industry's supply chain) are investigated. We show that while automobile manufacturing companies are under scrutiny to become more and more environmentally friendly, not only at their manufacturing stage but also at their products' useful and EOL stages, there appears to be no such burden on the auxiliary companies. Our conclusion is based on an elaborate survey conducted during the fall of 2004 of Spanish auxiliary companies with questions about the characteristics, environmental practices and reverse logistics related activities carried out by the companies.

  18. Implementation of the Environmental Management System in Radioactive Waste Management

    International Nuclear Information System (INIS)

    Fabjan, M.; Kralj, M.; Rojc, J.

    2008-01-01

    Agency for Radwaste Management (ARAO) is a public institution assigned to provide effective, safe and responsible management of all kinds of radioactive waste in Slovenia from the moment they arise to their final disposal. Therefore it holds an important role in environmental protection. Its main assignment is to provide conditions for permanent disposal of radioactive waste. It is also authorised to perform public service of radioactive waste management from small producers that includes: collection of the waste from small producers at the producers' premises, transportation to the storage facility, treatment, conditioning storage of RW from small producers; acceptance of radioactive waste in case of emergency situation (e.g. transport accidents); acceptance of radioactive waste in case of unknown producer; operation and management of Central Interim Storage of Radioactive Waste. The quality of ARAO performance in carrying out its mission is assured by implementing the environmental management system according to the standard ISO 14001:2004. Its effectiveness was confirmed by certification in October 2007. The ISO 14001:2004 certificate represents a permanent commitment of ARAO to implement and improve the environmental management system and to include environmental aspects in all its activities, especially in performing the public service. We developed own evaluation criteria for determination of relevant environmental impacts and aspects. ARAO has defined its environmental policy and objectives, it evaluates its environmental impacts yearly, and defines its environmental programmes that not only fulfil legal requirements but tend even to reduce the impacts below legally set levels. A very important environmental programme in the last few years was the reconstruction of the storage facility. Public information and communication programmes are considered to be important also from the environmental management point of view, because public shows great interest in

  19. The administration and the environmental behavior of the small and medium industrial companies: The case of a city of Argentina

    International Nuclear Information System (INIS)

    Guzman Ramos, Aldo; Fernandez, Guillermina

    2001-01-01

    The present article approaches the subject of the management and the environmental behavior in the industrial activity, especially in the small and medium companies, a city of Argentina. It is considers that the environmentalist strategies can be a possible exit to the socioeconomic and environmental crisis, but single for the great companies; since the rest of the companies presents/displays serious difficulties (economic, social, psychological, etc.) in order to initiate a sustainable industrial development

  20. System analysis of industrial waste management: A case study of industrial plants located between Tehran and Karaj

    Directory of Open Access Journals (Sweden)

    Mohammad Amin Karami

    2015-01-01

    Full Text Available Aims: In this study, management of industrial waste in industries located between Tehran and Karaj in 2009-2010 was examined. Materials and Methods: This is a cross-sectional study which was done by site survey (Iranian environmental protection organization questionnaire usage and results analysis. This questionnaire was consisted of 45 questions about industrial waste, quantity, quality, and management. A total number of industries with over 50 employees was 283, and Stratified sampling method was used. Sample of size 50 was selected from 283cases. Results: The major hazardous waste-generating industries include chemical and plastic. Private sectors disposed 45% of generated waste. Majority of wastes were buried (62%, and only 17% of industrial waste was recycled. Conclusion: For hazardous waste reduction in this zone and health and economic attractions, the opportunity for reuse and recovery for these wastes must maximize in short-term and burial of industrial waste must be minimized. Industries such as chemical-plastic and electronics which have higher hazardous waste, in long-term, must be replaced with other industries such as wood cellulose and paper that have lower hazardous waste production rate.

  1. Environmental Management Performance Report July 2000

    Energy Technology Data Exchange (ETDEWEB)

    EDER, D.M.

    2000-07-01

    The purpose of this report is to provide the Department of Energy Richland Operations Office (DOE-RL) a monthly summary of the Project Hanford Management Contractor's (PHMC) Environmental Management (EM) performance by Fluor Hanford (FH) and its subcont.

  2. Strategies for the environmental management of chains

    NARCIS (Netherlands)

    Hagelaar, J.L.F.; Vorst, van der J.G.A.J.

    2002-01-01

    The ways to reduce the discharge of pollutants are diverse. End-of-pipe measures, cleaner production technologies and environmentally oriented product design is the spectrum in which solutions can be found. To implement such measures, and ultimately close industrial cycles, companies have to

  3. Where the chips fall: environmental health in the semiconductor industry.

    Science.gov (United States)

    Chepesiuk, R

    1999-09-01

    Three recent lawsuits are focusing public attention on the environmental and occupational health effects of the world's largest and fastest growing manufacturing sector-the $150 billion semiconductor industry. The suits allege that exposure to toxic chemicals in semiconductor manufacturing plants led to adverse health effects such as miscarriage and cancer among workers. To manufacture computer components, the semiconductor industry uses large amounts of hazardous chemicals including hydrochloric acid, toxic metals and gases, and volatile solvents. Little is known about the long-term health consequences of exposure to chemicals by semiconductor workers. According to industry critics, the semiconductor industry also adversely impacts the environment, causing groundwater and air pollution and generating toxic waste as a by-product of the semiconductor manufacturing process. In contrast, the U.S. Bureau of Statistics shows the semiconductor industry as having a worker illness rate of about one-third of the average of all manufacturers, and advocates defend the industry, pointing to recent research collaborations and product replacement as proof that semiconductor manufacturers adequately protect both their employees and the environment.

  4. Linking environmental and stakeholder management

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    1999-01-01

    is to discuss how the influence from an increasing number of stakeholders may influence the companies to adopt a more proactive attitude towards environmentally related initiatives. The first part of the paper will discuss the relevant theory and introduce a model to analyse and identify the most relevant......Regulation has been an important instrument in pushing the business community towards a more sustainable way of conduct. But recently an increasing pressure from a growing number of stakeholders including employees, customers, neighbours, NGO's etc has been observed. The purpose of this paper...... stakeholder groups and their influence. Based on a recent survey among Danish companies the second part of the paper will report on the actual perceived influence from a variety of stakeholders to force companies to introduce environmentally-related initiatives. The results will then be discussed in light...

  5. Environmental and energy management at Nestle; Umwelt- und Energiemanagement bei Nestle

    Energy Technology Data Exchange (ETDEWEB)

    Conzelmann, C.

    2007-07-01

    This article describes the challenges facing the environmental and energy management of Nestle and its implementation along the value chain, from agricultural production and industrial processing to the consumer. (orig.)

  6. Environmental risk management for: insurance requirements, mergers and acquisitions and plant closures

    Energy Technology Data Exchange (ETDEWEB)

    Pizzi, F.P.

    1985-03-01

    Industry cannot rely on external sources such as EIL Insurance as the primary vehicle for minimizing or reducing environmental liabilities. We must develop strong internal risk management programs and procedures to eliminate or minimize the risks from operations.

  7. Environmental quality indexing of large industrial development alternatives using AHP

    International Nuclear Information System (INIS)

    Solnes, Julius

    2003-01-01

    Two industrial development alternatives have been proposed for the East Coast of Iceland in order to strengthen its socio-economic basis. The favoured option is to build a large aluminium smelter, which requires massive hydropower development in the nearby highlands. Another viable option is the construction of a 6-million-ton oil refinery, following the planned exploitation of the Timan Pechora oil reserves in the Russian Arctic. A third 'fictitious' alternative could be general development of existing regional industry and new knowledge-based industries, development of ecotourism, establishment of national parks, accompanied by infrastructure improvement (roads, tunnels, communications, schools, etc.). The three alternatives will have different environmental consequences. The controversial hydropower plant for the smelter requires a large water reservoir as well as considerable land disturbance in this unique mountain territory, considered to be the largest uninhabited wilderness in Western Europe. The aluminium smelter and the oil refinery will give rise to substantial increase of the greenhouse gas (GHG) emissions of the country (about 20%). Then there is potential environmental risk associated with the refinery regarding oil spills at sea, which could have disastrous impact on the fisheries industry. However, the oil refinery does not require any hydropower development, which is a positive factor. Finally, the third alternative could be defined as a ''green'' solution whereby the detrimental environmental consequences of the two industrial solutions are mostly avoided. In order to compare the three alternatives in an orderly manner, the analytic hierarchy process methodology of Saaty was applied to calculate the environmental quality index of each alternative, which is defined as a weighted sum of selected environmental and socio-economic factors. These factors are evaluated on a comparison basis, applying the AHP methodology, and the weights in the quality

  8. Analysis of Corporate Environmental Management: Methodological Aspects

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    2001-01-01

    in business presents a challenge to management, however, since it implies a fundamental change in some of the ways of operating a company. This paper will briefly discuss how information on the actual extent of environmental management in Danish companies and the way it is applied has been collected based......Human activities cannot avoid influencing conditions in the natural environment one way or the other. This includes as well common activities in the business sector. But during the past few decades, environmental disasters in Seveso and Bhopal, and the Exxon Valdes oil spill in Alaska have...... contributed to an increasing awareness of the effect of business activities on the physical environment. To assist companies reduce, evaluate, monitor and control their environmental impact the concept of corporate environmental and resource management has been developed. Implementation of this concept...

  9. Decision support for utility environmental risk management

    International Nuclear Information System (INIS)

    Balson, W.E.; Wilson, D.S.

    1991-01-01

    This paper reviews a number of decision support methods developed and applied by Decision Focus Incorporated to help utility personnel manage current environmental problems. This work has been performed for the Environmental Risk Analysis Program of EPRI's Environment Division, and also for a number of electric utilities across the country. These are two distinct types of decision support software tools that have been created: economic risk management and environmental risk analysis. These types differ primarily in the identification of who will make a decision. Economic risk management tools are directed primarily at decisions made by electric utilities. Environmental risk analysis tools are directed primarily at decisions made by legislative or regulatory agencies, about which a utility may wish to comment

  10. Balancing environmental and industry sustainability: a case study of the US gold mining industry.

    Science.gov (United States)

    Finnie, Bruce; Stuart, Jeffrey; Gibson, Linda; Zabriskie, Fern

    2009-09-01

    Mandatory insurance requirements and/or mitigation fees (royalties) for mining companies may help reduce environmental risk exposure for the federal government. Mining is examined since the Environmental Protection Agency (EPA) Toxic Release Inventory reveals that this sector produces more hazardous waste than any other industrial sector. Although uncommon, environmental expense can exceed hundreds of millions of dollars per development. Of particular concern is the potential for mines to become unfunded Superfund sites. Monte Carlo simulation of risk exposure is used to establish a plausible range of unfunded federal liabilities associated with cyanide-leach gold mining. A model is developed to assess these costs and their impact on both the federal budget and corporate profitability (i.e., industry sustainability), particularly if such costs are borne by offending firms.

  11. Environmental monitoring in the gas industry of Russia

    International Nuclear Information System (INIS)

    Sedykh, A.D.; Dinkov, V.A.; Gritsenko, A.I.; Bosnyatsky, G.P.; Maksimov, V.M.

    1997-01-01

    The paper describes the basic principles and targets of production pollution monitoring (PPM) along with the analysis of structure, content and main functions of PPM relative to the experience of EEC and existing legislative and normative basis. The comparison, quantitative and qualitative analysis of pollutant emission at the Russian gas industry enterprises is given. Promising scientific and research targets the solution of which will promote improvement of ecological situation and will allow to meet international environmental agreements have been formulated. (au)

  12. Environmental regulatory framework for the upstream petroleum industry

    International Nuclear Information System (INIS)

    1996-01-01

    In order to provide its member companies with a useful reference document in environmental analysis and compliance, CAPP compiled a list of Canadian legislation, regulations and guidelines which relate to the upstream petroleum industry. Text of all federal, Alberta, British Columbia and Saskatchewan legislation, regulations, guidelines and related documents were provided. Pending legislation, regulations and government policy have been identified. Annual updates will be provided to all subscribers

  13. Environmental Management Strategy: Four Forces Analysis

    Science.gov (United States)

    Doyle, Martin W.; Von Windheim, Jesko

    2015-01-01

    We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

  14. Environmental management strategy: four forces analysis.

    Science.gov (United States)

    Doyle, Martin W; Von Windheim, Jesko

    2015-01-01

    We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

  15. Multi-objective model of waste transportation management for crude palm oil industry

    Science.gov (United States)

    Silalahi, Meslin; Mawengkang, Herman; Irsa Syahputri, Nenna

    2018-02-01

    The crude palm oil industry is an agro-industrial commodity. The global market of this industry has experienced rapid growth in recent years, such that it has a strategic value to be developed for Indonesian economy. Despite these economic benefits there are a number of environmental problems at the factories, such as high water consumption, the generation of a large amount of wastewater with a high organic content, and the generation of a large quantity of solid wastes and air pollution. In terms of waste transportation, we propose a multiobjective programming model for managing business environmental risk in a crude palm oil manufacture which gives the best possible configuration of waste management facilities and allocates wastes to these facilities. Then we develop an interactive approach for tackling logistics and environmental risk production planning problem for the crude palm oil industry.

  16. Teaching Professionals Environmental Management and Cleaner Technology

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik; Jørgensen, Michael Søgaard; Thorsen, Nils

    -ters. The target groups are professional environmental managers working in businesses including consultants, governmental institutions and organizations. To get access to the education the students must have a technical/nature science competence at master level or bachelor level combined with relevant job...... experience. Generally participants have had 5-15 years of practical experience and are in the position of a internal or external job change towards new tasks that require new knowledge, methodologies or management/co-ordination skills. The education of "Masters of Environmental Management" (MEM) started...

  17. Environmental Restoration Information Resource Management Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Environmental Restoration Information Resources Management (ER IRM) Program Plan defines program requirements, organizational structures and responsibilities, and work breakdown structure and to establish an approved baseline against which overall progress of the program as well as the effectiveness of its management will be measured. This plan will guide ER IRM Program execution and define the program`s essential elements. This plan will be routinely updated to incorporate key decisions and programmatic changes and will serve as the project baseline document. Environmental Restoration Waste Management Program intersite procedures and work instructions will be developed to facilitate the implementation of this plan.

  18. Environmental Restoration Information Resource Management Program Plan

    International Nuclear Information System (INIS)

    1994-09-01

    The Environmental Restoration Information Resources Management (ER IRM) Program Plan defines program requirements, organizational structures and responsibilities, and work breakdown structure and to establish an approved baseline against which overall progress of the program as well as the effectiveness of its management will be measured. This plan will guide ER IRM Program execution and define the program's essential elements. This plan will be routinely updated to incorporate key decisions and programmatic changes and will serve as the project baseline document. Environmental Restoration Waste Management Program intersite procedures and work instructions will be developed to facilitate the implementation of this plan

  19. Harmonization of industrial and oilfield waste management issues in Alberta

    International Nuclear Information System (INIS)

    Halla, S.

    1999-01-01

    There has been an ongoing discussion concerning the harmonization of waste management requirements within Alberta between the Alberta Energy and Utilities Board (EUB) and Alberta Environment (AENV), with the ultimate goal of publishing a memorandum of understanding (MOU) that will lay out the division of responsibilities between the two authorities on this matter. An overview is included of waste management in Alberta and of the harmonization agreements attained to date, with a stress on oil field waste issues. The EUB and AENV developed a MOE on the harmonization of waste management in Alberta, and a discussion is made of the concept of equivalency, which is used in the development of 'EUB guide 58: oilfield waste management requirements for the upstream petroleum industry' and will be a guiding principle for the MOU. Although the EUB's processes for waste management will not be exactly the same as AENV's, the EUB has made the commitment that, as a minimum, the requirements will provide the same level of environmental protection and public safety equivalent to that provided by AENV

  20. A system approach to the environmental analysis of industrial buildings

    Energy Technology Data Exchange (ETDEWEB)

    San-Jose Lombera, Jose-Tomas [LABEIN-Tecnalia, C/Geldo, Parque Tecnologico de Bizkaia, Edificio 700, 48160 Derio (Vizcaya) (Spain); Department of Science of Materials, ESTSI Bilbao-University of Basque Country (UPV/EHU), Alda, Urquijo s/n, 48013 Bilbao (Spain); Garrucho Aprea, Isaac [SEDICAL S.A., Txorierri Etorbidea 46 - Pab, 12 F 48150 Sondica (Vizcaya) (Spain)

    2010-03-15

    The construction sector plays a major role in the development of society. It wields enormous influence over economic activity, employment and growth rates. However, it also has a substantial impact on the natural environment, the effects of which are evident across the world. Over recent decades, pioneering initiatives have proposed environmentally friendly buildings and sustainable construction has centred on residential and office buildings. Nevertheless, further consideration still needs to be given to sustainability in many areas of industrial construction. Accordingly, an Integrated Value Model for Sustainable Assessment (MIVES) is presented in this article that applies a set of six study scopes to define the sustainability criteria of industrial buildings. The system uses a requirements tree to quantify sustainability at various hierarchical levels, in order to assess the behaviour of industrial buildings and compliance with the criteria. Assignment of value functions to the sustainability criteria is then described in the context of a case study of a printing works, which demonstrates the effectiveness of this model at unifying both qualitative and quantitative indicators, in order to arrive at a specific ''environmental sustainability index'' for the industrial building. (author)

  1. Life-Cycle environmental impact assessment of mineral industries

    Science.gov (United States)

    Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

    2018-05-01

    Mining is the extraction and processing of valuable ferro and non-ferro metals and minerals to be further used in manufacturing industries. Valuable metals and minerals are extracted from the geological deposits and ores deep in the surface through complex manufacturing technologies. The extraction and processing of mining industries involve particle emission to air or water, toxicity to the environment, contamination of water resources, ozone layer depletion and most importantly decay of human health. Despite all these negative impacts towards sustainability, mining industries are working throughout the world to facilitate the employment sector, economy and technological growth. The five most important miners in the world are South Africa, Russia, Australia, Ukraine, Guinea. The mining industries contributes to their GDP significantly. However, the most important issue is making the mining world sustainable thus reducing the emissions. To address the environmental impacts caused by the mining sectors, this paper is going to analyse the environmental impacts caused by the 5 major minerals extraction processes, which are bauxite, ilmenite, iron ore, rutile and uranium by using the life-cycle impact assessment technologies. The analysis is done here using SimaPro software version 8.4 using ReCipe, CML and Australian indicator method.

  2. Managing technological and environmental dynamics

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    2001-01-01

    The field of MoT cannot continue indefinitely to ignore the importance of the natural environment as a fundamental basis for technological development. This paper will therefore focus on the various linkages between management of technology and sustainable development, discussing both the current...

  3. The greening of black gold. Towards international environmental alignment in the petroleum industry

    Energy Technology Data Exchange (ETDEWEB)

    Van de Wateringen, S.L.

    2005-06-24

    The aim of this research is to expand the knowledge on the integration of environmental issues in the organisation and management of multinational corporations (MNCs). The present study analyses the characteristics and determining factors of the environmental strategy and the organisation of environmental management (structure) in the petroleum industry, driven by the following general question: (1) Which factors influence the relationship between environmental strategy and environmental structure in a multinational corporation? Sub-questions have been formulated to enable this analysis for the international petroleum industry: Q1: How can external contextual characteristics be classified in such a way that a relationship with environmental strategy and environmental structure can be studied?; Q2: How can internal characteristics of MNCs be characterised, in such a way that a relationship with environmental strategy and environmental structure can be studied?; and Q3: How can environmental strategy and structure of large MNCs be characterised, in such a way that influencing factors can be identified? To these ends, the research project has adjusted the strategic alignment model for environmental issues in MNCs. It is introduced as the 'International Environmental Alignment Framework'. As further discussed in Chapter 3, strategic alignment examines the cooperative and/or conflicting relationship between strategy and structure with the aim of improving efficiency and performance. Building on the concepts of strategic fit and functional integration, this model assumes that decisions need to be coordinated to achieve value. The International Environmental Alignment Framework copied the distinction between an internal, functional domain and an external, strategic domain. This allows for the inclusion of company, sector and country variables. Furthermore, the framework distinguishes three different orders of alignment (simple consistency, mutual reinforcement

  4. A linear regression approach to evaluate the green supply chain management impact on industrial organizational performance.

    Science.gov (United States)

    Mumtaz, Ubaidullah; Ali, Yousaf; Petrillo, Antonella

    2018-05-15

    The increase in the environmental pollution is one of the most important topic in today's world. In this context, the industrial activities can pose a significant threat to the environment. To manage problems associate to industrial activities several methods, techniques and approaches have been developed. Green supply chain management (GSCM) is considered one of the most important "environmental management approach". In developing countries such as Pakistan the implementation of GSCM practices is still in its initial stages. Lack of knowledge about its effects on economic performance is the reason because of industries fear to implement these practices. The aim of this research is to perceive the effects of GSCM practices on organizational performance in Pakistan. In this research the GSCM practices considered are: internal practices, external practices, investment recovery and eco-design. While, the performance parameters considered are: environmental pollution, operational cost and organizational flexibility. A set of hypothesis propose the effect of each GSCM practice on the performance parameters. Factor analysis and linear regression are used to analyze the survey data of Pakistani industries, in order to authenticate these hypotheses. The findings of this research indicate a decrease in environmental pollution and operational cost with the implementation of GSCM practices, whereas organizational flexibility has not improved for Pakistani industries. These results aim to help managers regarding their decision of implementing GSCM practices in the industrial sector of Pakistan. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. The Middle Eastern Wealth Management Industry: Boon or Bust?

    OpenAIRE

    Michael, Bryane; Apostoloski, Nenad

    2014-01-01

    The wealth management industry in the Middle East and North Africa (MENA) represents a roughly $800 billion opportunity. Yet, tapping this opportunity will require new strategies by the wirehouses looking to penetrate into this market. In this paper, we argue that Middle-Eastern policymakers and bankers will need to develop an indigenous wealth management industry which keeps the super-wealthy’s investments at home. Developing a local national wealth management industry requires letting in fo...

  6. Integrating Environmental and Stakeholder Management

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    2001-01-01

    Regulation has been an important instrument in pushing the business community towards im-proved environmental performance. However, there has also been increasing pressure from a growing number of stakeholders, including employees, customers, neighbours and NGOs, etc. In order to improve corporate...... relationships with various stakeholders, companies need to be able to identify these stakeholders and assess their influence. The first part of this paper will discuss the relevant theory and introduce a model to analyse and identify the most significant stakeholder groups and their influence on corporate...

  7. Women's Environmental Literacy As Social Capital In Environmental Management For Environmental Security of Urban Area

    Science.gov (United States)

    Asteria, Donna; Herdiansyah, Herdis; Wayan Agus Apriana, I.

    2016-02-01

    This study is about experience of women's role in environmental management to raise environmental security and form of women's emancipation movement. Environmental concerns conducted by residents of urban women who become environmental activists based on environmental literacy. Because of that, women's experience in interacting with both physic and social environment have differences in managing the environment including managing household waste by applying the principles of the 3Rs (reduce, reuse, recycle) and their persuasive efforts on their communities. This is the key to achieving sustainable development by anticipating environmental problem and preserving the environment. This study is conducted qualitative research method and its type is descriptive-explanative. The result of this study is environmental literacy of women activist on pro-environment action in their community that has achieved spiritual environmental literacy. Environmental literacy may differ due to internal and external condition of each individual. Pro-environment activities conducted as a form of responsibility of environmental concern such as eco-management, educational, and economic action, by persuading residents to proactively and consistently continue to do environmental management and develop a sense of community in shaping the networks of environmental concern in local context for global effect.

  8. Sinos River Hydrographic Basin: urban occupation, industrialization and environmental memory

    Directory of Open Access Journals (Sweden)

    M. F. Nunes

    Full Text Available This article presents an analysis of the process of industrialization and urbanization of the Sinos Valley in Rio Grande do Sul state, Brazil, starting from the establishment of leather goods and footwear manufacturing in the region during the 19th century when tanneries and factories producing footwear and/or components for footwear began to appear, and with special attention to aspects related to the environmental impact on the Sinos river hydrographic basin. The article is based on both bibliographic and documentary research and also draws on biographical narratives of workers with links to the leather goods and footwear industry obtained using ethnographic method. It was found that contemporary environmental conflicts emerge from within a memory of work and an environmental memory in which the factories, the unplanned urbanization, and the utilization of water and other natural resources form a chain of significance. Significance that precludes any form of fragmented analysis that isolates any of these aspects from the others: the economic, socio-historic, cultural, political, or the environmental.

  9. Sinos River Hydrographic Basin: urban occupation, industrialization and environmental memory.

    Science.gov (United States)

    Nunes, M F; Figueiredo, J A S; Rocha, A L C

    2015-12-01

    This article presents an analysis of the process of industrialization and urbanization of the Sinos Valley in Rio Grande do Sul state, Brazil, starting from the establishment of leather goods and footwear manufacturing in the region during the 19th century when tanneries and factories producing footwear and/or components for footwear began to appear, and with special attention to aspects related to the environmental impact on the Sinos river hydrographic basin. The article is based on both bibliographic and documentary research and also draws on biographical narratives of workers with links to the leather goods and footwear industry obtained using ethnographic method. It was found that contemporary environmental conflicts emerge from within a memory of work and an environmental memory in which the factories, the unplanned urbanization, and the utilization of water and other natural resources form a chain of significance. Significance that precludes any form of fragmented analysis that isolates any of these aspects from the others: the economic, socio-historic, cultural, political, or the environmental.

  10. Social and Environmental Impact of the Rare Earth Industries

    Directory of Open Access Journals (Sweden)

    Saleem H. Ali

    2014-02-01

    Full Text Available The use of rare earth elements in various technologies continues to grow despite some alternatives being found for particular uses. Given a history of ecological concerns about pollution from rare earth mines, particularly in China, there are growing social and environmental concerns about the growth of the mining and mineral processing in this sector. This is best exemplified by the recent social and environmental conflict surrounding the development of the Lynas Advanced Materials Plant (LAMP in Kuantan, Malaysia which led to international activism and claims of environmental and social injustice. This paper analyses the structure of environmental and social conflicts surrounding rare earth minerals and opportunities for improving the social and environmental performance of the sector. Many of these elements are used for green technologies. Opportunities exist that offer a more circular supply chain following industrial ecological principles through which reuse and recycling of the materials can provide a means of mitigating social and environmental conflicts in this sector. In addition, public engagement processes that recognize community concerns about radiation, and transparent scientifically predicated decision-making through an appropriate governance structure within regulatory organizations are also presented.

  11. Energy and environmental market in industrial enterprises in Thailand

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    This paper discusses markets related with energy conservation and environment preservation in industrial enterprises in Thailand. The present Thailand is not in a situation that investments are made into environmental businesses or energy saving businesses. However, the attitude of the government toward environment is that emphasis is placed on solving the environmental pollution problems. Laws and regulations are defined for assistance in environment preservation to corporations making efforts to increase export, resource protection and energy conservation. These measures lead to expectation on bright future in developing technologies and markets related to environment preservation and energy conservation. Control of wastes by using clean technologies and enhancement in productivity are very important issues for the export of Thailand partly because European countries and America set these requirements as a condition for transaction. The markets related to energy conservation and environment preservation are anticipated of participation from such businesses as consultants, device manufacturers, and inspection and analysis of environmental effects. (NEDO)

  12. Industrial water and effluent management in the milk processing industry

    CSIR Research Space (South Africa)

    Funke, JW

    1970-01-01

    Full Text Available One of the most important commodities used in any food-processing industry is water which must be of the right quality. Water which comes into direct contact with milk or milk products must meet standards which are even stricter than those for a...

  13. Identifying potential environmental impacts of waste handling strategies in textile industry.

    Science.gov (United States)

    Yacout, Dalia M M; Hassouna, M S

    2016-08-01

    Waste management is a successful instrument to minimize generated waste and improve environmental conditions. In spite of the large share of developing countries in the textile industry, limited information is available concerning the waste management strategies implemented for textiles on those countries and their environmental impacts. In the current study, two waste management approaches for hazardous solid waste treatment of acrylic fibers (landfill and incineration) were investigated. The main research questions were: What are the different impacts of each waste management strategy? Which waste management strategy is more ecofriendly? Life cycle assessment was employed in order to model the environmental impacts of each waste streaming approach separately then compare them together. Results revealed that incineration was the more ecofriendly approach. Highest impacts of both approaches were on ecotoxicity and carcinogenic potentials due to release of metals from pigment wastes. Landfill had an impact of 46.8 % on human health as compared to 28 % by incineration. Incineration impact on ecosystem quality was higher than landfill impact (68.4 and 51.3 %, respectively). As for resources category, incineration had a higher impact than landfill (3.5 and 2.0 %, respectively). Those impacts could be mitigated if state-of-the-art landfill or incinerator were used and could be reduced by applying waste to energy approaches for both management systems In conclusion, shifting waste treatment from landfill to incineration would decrease the overall environmental impacts and allow energy recovery. The potential of waste to energy approach by incineration with heat recovery could be considered in further studies. Future research is needed in order to assess the implementation of waste management systems and the preferable waste management strategies in the textile industry on developing countries.

  14. Managing environmental aspects resulting from energy consumption

    International Nuclear Information System (INIS)

    2001-01-01

    Human health and environmental impacts of fossil fuel energy consumptions are examined and the ongoing effort to align energy management plans with sustainable development strategies and environmental management systems is described. Human health impacts are manifested in mortality rates, hospital admissions, visits to emergency rooms and physicians' offices, reduced physical performance, increase in the use of medications, impaired pulmonary function and a variety of lesser (or less perceptible) effects. Environmental impacts are demonstrated through climatic change, increase in greenhouse gas emissions, increase in smog, acid rain, and soil, groundwater and surface water contamination. The importance of commitment, integrated planning, measurement and evaluation, periodic review and improvement and documentation in aligning energy and environmental management plans are highlighted, along with the need for behavioral and operational changes, the creation of employee awareness and training, and the adoption of green procurement and life cycle costing. Adoption of the ISO 14000 approach to managing energy consumption is also seen as an important step in the direction of integrated energy and environmental management and sustainable development

  15. Identifying environmental safety and health requirements for the Fernald Environmental Restoration Management Corporation

    International Nuclear Information System (INIS)

    Beckman, W.H.; Cossel, S.C.; Alhadeff, N.; Lindamood, S.B.; Beers, J.A.

    1994-01-01

    This presentation will describe the Fernald Environmental Restoration Management Corporation's (FERMCO) Standards/Requirements Identification Documents (S/RlDs) Program, the unique process used to implement it, and the status of the program. We will also discuss the lessons learned as the program was implemented. The Department of Energy (DOE) established the Fernald site to produce uranium metals for the nation's defense programs in 1953. In 1989, DOE suspended production and, in 1991, the mission of the site was formally changed to one of environmental cleanup and restoration. The site was renamed the Fernald Environmental Management Project (FEMP). FERMCO's mission is to provide safe, early, and least-cost final clean-up of the site in compliance with all regulations and commitments. DOE has managed nuclear facilities primarily through its oversight of Management and Operating contractors. Comprehensive nuclear industry standards were absent when most DOE sites were first established, Management and Operating contractors had to apply existing non-nuclear industry standards and, in many cases, formulate new technical standards. Because it was satisfied with the operation of its facilities, DOE did not incorporate modern practices and standards as they became available. In March 1990, the Defense Nuclear Facilities Safety Board issued Recommendation 90-2, which called for DOE to identify relevant standards and requirements, conduct adequacy assessments of requirements in protecting environmental, public, and worker health and safety, and determine the extent to which the requirements are being implemented. The Environmental Restoration and Waste Management Office of DOE embraced the recommendation for facilities under its control. Strict accountability requirements made it essential that FERMCO and DOE clearly identify applicable requirements necessary, determine the requirements' adequacy, and assess FERMCO's level of compliance

  16. [Gender inequity in health in contexts of environmental risk from mining and industrial activity in Mexico].

    Science.gov (United States)

    Catalán-Vázquez, Minerva; Riojas-Rodríguez, Horacio

    2015-06-01

    Analyze how gender inequity manifests in contexts of poverty in different environmental risk scenarios in Mexico. Qualitative design based on six discussion groups and 54 in-depth interviews with women from six exposed communities: two to environmental manganese in a mining district, two in an industrial corridor, and two bordering a sanitary landfill. A document review of environmental and health studies in each area was done to relate them to the women's perspective on the problem. In the three case studies, by gender roles, women stay at home and do housework and, therefore, are subject to intense environmental exposure when carrying out their daily tasks, such as house cleaning. Interview and discussion group results were found to be related to epidemiological study results. In the case of the mining district, women's perceptions are consistent with study comments on adverse cognitive effects of manganese exposure. In all three cases, there are serious limitations on women's political participation in environmental risk management. Due to conditions of inequity, women are highly exposed to environmental health risks and their social participation in solving environmental problems is quite limited. These results have social and environmental policy implications in the areas studied, especially with regard to risk assessment, management, and communication.

  17. Screening of Industrial Development Policies, Plans and Programs of Strategic Environmental Assessment in the Industrial Sector of Iran

    OpenAIRE

    J. Nouri; B. Maghsoudlou Kamali

    2005-01-01

    The present investigation deals with the quality of capacity building and institutional strengthening of Strategic Environmental Assessment (SEA) in the industrial sector as well as determining the environmental strategies for industrial sustainable development in Iran. The leading aim of this paper has been to systematize the environmental considerations in industrial development strategies, policies, plans and programs in the highest strategic decision making processes and to ensure environ...

  18. Environmental management practices and engineering science: a review and typology for future research.

    Science.gov (United States)

    Evangelinos, Konstantinos I; Allan, Stuart; Jones, Keith; Nikolaou, Ioannis E

    2014-04-01

    Current literature describes a number of environmental management practices and cleaner production methods that facilitate different industrial sectors to address their various environmental impacts. The high number of present practices makes their use especially difficult and complicated. This paper aims to shed light on this field by providing a typology of those environmental management practices (such as environmental management systems, environmental indicators assessment methodologies, and cleaner productions methods) and their limitations. It also describes the strengths and weaknesses of using such tools and thoughts for future research. © 2013 SETAC.

  19. Environmental management in Framatome nuclear fuel

    International Nuclear Information System (INIS)

    Thiebaut, B.; Ferre, A.

    1999-01-01

    Environmental preservation is both a national regulatory requirement and a condition for economic and social development. The various industrial sites belonging to the Framatome Nuclear Fuel Organisation, whose activities range from the processing and transformation of Zirconium alloy products to the fabrication of fuel assemblies, have always demonstrated that protection of the environment was their prime concern by implementing low pollution level processes and reducing and/or recycling industrial waste and effluents. As early as January 1996, a directive issued by the Framatome Group defined its environmental policy and responsibilities in the matter. Within the Framatome Nuclear Fuel Organization, this directive has been applied by implementation of: low level pollution processes; better performance of recycling of effluents, by-products and waste; environmental information policy. In all its plants, the Framatome Nuclear Fuel Organization has decided to pursue and to step up its environmental protection policy by: officializing its action through compliance with ISO standard 14001 and certification of all its industrial sites by 2001 at the latest; launching new actions and extra investment programs. In this context, FBFC has applied for a modification of the decrees concerning the dumping of liquid and gas effluents at the Romans factory. (authors)

  20. Industry characteristics management of innovative processes at the enterprises of light industry

    OpenAIRE

    Yusupov, Ulugbek

    2015-01-01

    This article considers the issues of innovative development and management of innovative processes in the knitting industry of Uzbekistan. Analyzed the main directions of innovative processes and provides recommendations for their management.