WorldWideScience

Sample records for industrial electrical distribution

  1. Electricity distribution industry restructuring in South Africa: A case study

    International Nuclear Information System (INIS)

    Gaunt, C.T.

    2008-01-01

    For 20 years there has been vigorous debate about restructuring the large, developed electricity industry in South Africa, but the plans have not been implemented. The justification of the proposed restructuring illustrates the different expectations of the participants in the electricity industry. The case study reviews what has occurred against a background of some theories about organisations, and identifies six key issues. Some lessons include the need to adopt an industry structure compatible with the objectives of electricity distribution in developing countries, the unsuitability of orthodox approaches to organisations, that no industry structure appears to be significantly better than others, industry restructuring of public sector utilities has a significant political dimension, restructuring can fail even if there is support from a high level of government, and indecision and uncertainty have serious negative consequences. The experience should be helpful for other developing countries considering structural change of their electricity industry

  2. Some thoughts on the Turkish electricity distribution industry

    International Nuclear Information System (INIS)

    Erdogdu, Erkan

    2009-01-01

    Over the past decade or so, the electricity industry of the Republic of Turkey (and indeed the world) has undergone profound reform in its structure, ownership and mindset. Increasing public concern about efficiency in the sector has led Turkey to discard the traditional model of a vertically integrated industry subject to cost-based regulation in favor of the unbundling of activities and the introduction of competition where it is possible. The industry has been structurally separated into generation, transmission, distribution and retail segments. The competitive segments of the industry (generation and retail) are planed to progressively expose to competition; the monopoly segments (especially, distribution) are to be reoriented to foster competition. Further, the ownership of the industry is under increasing pressure to move away from the public domain into the private one. The present article not only presents an analysis of the Turkish distribution sector and proposed privatization process but also provides some guidelines for policy makers. (author)

  3. Specification of merger gains in the Norwegian electricity distribution industry

    International Nuclear Information System (INIS)

    Saastamoinen, Antti; Bjørndal, Endre; Bjørndal, Mette

    2017-01-01

    Electricity distribution often exhibits economies of scale. In Norway, a number of smaller distribution system operators exist and thus there is potential to restructure the industry, possibly through mergers. However, the revenue cap regulatory model in Norway does not incentivize firms to merge as merging leads to a stricter revenue cap for the merged company. Thus the regulator compensates the firms in order to create such incentives. The amount of compensation is based on the potential gains of the merger estimated using a data envelopment analysis (DEA) based frontier approach introduced by Bogetoft and Wang (2005). DEA is however only one of many possible frontier estimators that can be used in estimation. Furthermore, the returns to scale assumption, the operating environment of firms and the presence of stochastic noise and outlier observations are all known to affect to the estimation of production technology. In this paper we explore how varying assumptions under two alternative frontier estimators shape the distribution of merger gains within the Norwegian distribution industry. Our results reveal that the restructuring policies of the industry may be significantly altered depending how potential gains from the mergers are estimated. - Highlights: • The merger gains of Norwegian electricity distribution firm are investigated. • Different estimators and model specifications are applied. • Results show that the gains are significantly affected by the model choice. • Incentives to merge may be shaped through the estimation of gains.

  4. Industrial Electricity. In-Plant Distribution. Vocational Trade and Industrial Education.

    Science.gov (United States)

    Teague, Cash; Pewewardy, Garner

    This curriculum guide, part of a series of industrial electricity curriculum guides, consists of materials for use in teaching a course on the in-plant distribution of electricity. Discussed in the introductory lessons are the National Electrical Code, power equipment, and blueprint reading. The next section, a series of units on branch-circuit…

  5. Outsourcing services in electricity distribution network industry; Ostopalveluiden kaeyttoe verkkoliiketoiminnassa

    Energy Technology Data Exchange (ETDEWEB)

    Aminoff, A.; Lappetelaeinen, I. (VTT Technical Research Centre of Finland, Espoo (Finland)); Partanen, J.; Viljainen, S.; Tahvanainen, K. (Lappeenranta Univ. of Technology (Finland)); Jaerventausta, P.; Trygg, P. (Tampere Univ. of Technology (Finland))

    2009-02-15

    This report examines purchased services in the electricity distribution industry. The report is specially directed to readers working in the industry or otherwise interested in it. This report is a result of a research study that was done in 2008 by VTT, Lappeenranta University of Technology and Tampere University of Technology. The authors are thankful for funders and companies that made this research possible and provided lot of information and knowledge. We appreciate the participants in the steering group as well as the companies and people who answered to questionnaires, gave interviews and took part in GDSSinnovation session. In the business of electricity distribution the usage of purchased services has been increasing during the past years and network companies have focused more on their core business processes. There are a couple of peaks in the number of new purchasing decisions in the middle of the 90s and in the beginning of 2000. The most popular purchased services are network construction and maintenance services. On the other hand, many network planning related activities are still done in-house by the network companies, and are considered their core business. There are some industry specific factors that affect to the decision on whether or not to buy the service outside the company and how to cooperate with the suppliers. For instance, many network companies are owned by municipalities and many service providers are owned by the network companies. The former issue may sometimes bring local politics into the decision-making of the network companies. The latter issue, in turn, has an impact on the relationship between the customer and the supplier, and the infra-organizational issues may sometimes complicate the service purchasing process. Electricity network companies also have natural monopoly positions in their operating areas. To prevent the abuse of monopoly positions, the network companies are subjected to economic regulation. This affects

  6. Distribution reliability in the reformed New Zealand electricity industry

    International Nuclear Information System (INIS)

    McGlinchy, B. J.

    1997-01-01

    The process of deregulating the electric power industry in New Zealand, which began in 1984, and is now a fully competitive system, was described. The industry is not only fully competitive, but enjoys the distinction of being subject only to very light-handed regulation. The regulation requires each company within the industry to publish an annual financial statement, the rate of profit and some performance indicators including reliability indices. Companies also report on faults in lines and cables, and on a voluntary basis they contribute to a 'by cause' survey, using indicators developed by the Canadian Electricity Association. It is expected that the indices that will be developed from this data will be used as benchmarks for performance. The data could also be used for probability analysis in system expansion programs. 6 refs., 7 figs

  7. Electricity distribution industry restructuring, electrification, and competition in South Africa

    International Nuclear Information System (INIS)

    Galen, P.S.

    1997-07-01

    This paper reviews the status of the South African electricity supply industry (ESI) and proposals for reorienting and restructuring it. South Africa has been intensely examining its ESI for more than 4 years in an effort to determine whether and how it should be restructured to best support the country's new economic development and social upliftment goals. The debate has been spirited and inclusive of most ESI stakeholders. The demands on and expectations for the ESI are many and varied. The debate has reflected this diversity of interests and views. In essence, however, there is a consensus on what is expected of the industry, namely, to extend provision of adequate, reliable, and affordable electricity service to all citizens and segments of the economy. This means a large-scale electrification program to reach as many of the nearly 50% of households currently without electricity service as soon as possible, tariff reform to promote equity and efficiency, and the upgrading of service quality now being provided by some of the newly consolidated municipal authorities. The issues involved are how best to achieve these results within the context of the national Reconstruction and Development Program, while accounting for time and resource constraints and balancing the interests of the various parties

  8. Network investments and the integration of distributed generation: Regulatory recommendations for the Dutch electricity industry

    International Nuclear Information System (INIS)

    Niesten, Eva

    2010-01-01

    An increase in the distributed generation of electricity necessitates investments in the distribution network. The current tariff regulation in the Dutch electricity industry, with its ex post evaluation of the efficiency of investments, average benchmarking and a frontier shift in the x-factor, delays these investments. In the unbundled electricity industry, the investments in the network need to be coordinated with those in the distributed generation of electricity to enable the system operators to build enough network capacity. The current Dutch regulations do not provide for a sufficient information exchange between the generators and the system operators to coordinate the investments. This paper analyses these two effects of the Dutch regulations, and suggests improvements to the regulation of the network connection and transportation tariffs to allow for sufficient network capacity and coordination between the investments in the network and in the generation of electricity. These improvements include locally differentiated tariffs that increase with an increasing concentration of distributed generation.

  9. Industry sector analysis, Mexico: Electric power production and distribution equipment. Export Trade Information

    International Nuclear Information System (INIS)

    Wood, J.S.; Miller, R.W.

    1988-09-01

    The Industry Sector Analyses (I.S.A.) for electric power production and distribution equipment contains statistical and narrative information on projected market demand, end-users, receptivity of Mexican consumers to U.S. products, the competitive situation - Mexican production, total import market, U.S. market position, foreign competition, and competitive factors, and market access - Mexican tariffs, non-tariff barriers, standards, taxes and distribution channels. The I.S.A. provides the United States industry with meaningful information regarding the Mexican market for electric power production and distribution equipment

  10. Firm size and productivity. Evidence from the electricity distribution industry in Brazil

    International Nuclear Information System (INIS)

    Tovar, Beatriz; Javier Ramos-Real, Francisco; De Almeida, Edmar Fagundes

    2011-01-01

    In this paper we apply Stochastic Frontier Analysis through a distance function to investigate the impact of firm size on productivity development in electricity distribution. We use a sample of seventeen Brazilian firms from 1998 to 2005 and decompose productivity into technical efficiency, scale efficiency and technical change. Moreover, a further step is to decompose the technical change measurement into several components. The results indicate that firm size is important for industry's productivity, and therefore a key aspect to consider when making decisions that affect the market structure in the electricity distribution industry. (author)

  11. An Industrial Control System for the Supervision of the CERN Electrical Distribution Network

    CERN Document Server

    Poulsen, S

    1999-01-01

    CERN operates a large distribution network for the supply of electricity to the particle accelerators, experiments and the associated infrastructure. The distribution network operates on voltage levels from 400 V to 400 kV with a total yearly consumption of near to 1000 GWh. In the past, the laboratory has developed an in-house control system for this network, using the technologies applied to the accelerator control system. However, CERN is now working on a project to purchase, configure and install an industrial Electrical Network Supervisor (ENS). This is a state-of-the-art industrial control system completely developed and supported by an external contractor. The system - based on a scalable and distributed architecture - will allow the installation to be performed gradually, and will be tested while the existing system is fully operational. Ultimately, the complete electrical distribution network will be supervised with this new system, the maintenance and further development of which will be the complet...

  12. Electric Industry Structure and Regulatory Responses in a High Distributed Energy Resources Future

    Energy Technology Data Exchange (ETDEWEB)

    Corneli, Steve [Seventhwave, Madison, WI (United States); Kihm, Steve [Seventhwave, Madison, WI (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-11-01

    The emergence of distributed energy resources (DERs) that can generate, manage and store energy on the customer side of the electric meter is widely recognized as a transformative force in the power sector. This report focuses on two key aspects of that transformation: structural changes in the electric industry and related changes in business organization and regulation that are likely to result from them. Both industry structure and regulation are inextricably linked. History shows that the regulation of the power sector has responded primarily to innovation in technologies and business models that created significant structural changes in the sector’s cost and organizational structure.

  13. Pervasive Electricity Distribution System

    Directory of Open Access Journals (Sweden)

    Muhammad Usman Tahir

    2017-06-01

    Full Text Available Now a days a country cannot become economically strong until and unless it has enough electrical power to fulfil industrial and domestic needs. Electrical power being the pillar of any country’s economy, needs to be used in an efficient way. The same step is taken here by proposing a new system for energy distribution from substation to consumer houses, also it monitors the consumer consumption and record data. Unlike traditional manual Electrical systems, pervasive electricity distribution system (PEDS introduces a fresh perspective to monitor the feeder line status at distribution and consumer level. In this system an effort is taken to address the issues of electricity theft, manual billing, online monitoring of electrical distribution system and automatic control of electrical distribution points. The project is designed using microcontroller and different sensors, its GUI is designed in Labview software.

  14. Industrial power distribution

    CERN Document Server

    Fehr, Ralph

    2016-01-01

    In this fully updated version of Industrial Power Distribution, the author addresses key areas of electric power distribution from an end-user perspective for both electrical engineers, as well as students who are training for a career in the electrical power engineering field. Industrial Power Distribution, Second Edition, begins by describing how industrial facilities are supplied from utility sources, which is supported with background information on the components of AC power, voltage drop calculations, and the sizing of conductors and transformers. Important concepts and discussions are featured throughout the book including those for sequence networks, ladder logic, motor application, fault calculations, and transformer connections. The book concludes with an introduction to power quality, how it affects industrial power systems, and an expansion of the concept of power factor, including a distortion term made necessary by the existence of harmonic.

  15. Electric distribution systems

    CERN Document Server

    Sallam, A A

    2010-01-01

    "Electricity distribution is the penultimate stage in the delivery of electricity to end users. The only book that deals with the key topics of interest to distribution system engineers, Electric Distribution Systems presents a comprehensive treatment of the subject with an emphasis on both the practical and academic points of view. Reviewing traditional and cutting-edge topics, the text is useful to practicing engineers working with utility companies and industry, undergraduate graduate and students, and faculty members who wish to increase their skills in distribution system automation and monitoring."--

  16. Generating and distributing electricity economically and in large amounts for generations. Siemens - a synonym of electrical industry

    International Nuclear Information System (INIS)

    Feldenkirchen, W.

    1997-01-01

    The development of electrical engineering and the history of the Siemens company have been closely interrelated since their beginnings. Since the late 19th century, the electrical industry, by constantly extending its range of products, has turned into a sector of economy with an international reputation. Under the paradigm of assuming technological leadership, or co-leadership, in the development of electrical engineering world-wide, Siemens has had its share in this process. (orig.) [de

  17. Three Essays in Energy Economics and Industrial Organization, with Applications to Electricity and Distribution Networks

    Science.gov (United States)

    Dimitropoulos, Dimitrios

    Electricity industries are experiencing upward cost pressures in many parts of the world. Chapter 1 of this thesis studies the production technology of electricity distributors. Although production and cost functions are mathematical duals, practitioners typically estimate only one or the other. This chapter proposes an approach for joint estimation of production and costs. Combining such quantity and price data has the effect of adding statistical information without introducing additional parameters into the model. We define a GMM estimator that produces internally consistent parameter estimates for both the production function and the cost function. We consider a multi-output framework, and show how to account for the presence of certain types of simultaneity and measurement error. The methodology is applied to data on 73 Ontario distributors for the period 2002-2012. As expected, the joint model results in a substantial improvement in the precision of parameter estimates. Chapter 2 focuses on productivity trends in electricity distribution. We apply two methodologies for estimating productivity growth . an index based approach, and an econometric cost based approach . to our data on the 73 Ontario distributors for the period 2002 to 2012. The resulting productivity growth estimates are approximately 1% per year, suggesting a reversal of the positive estimates that have generally been reported in previous periods. We implement flexible semi-parametric variants to assess the robustness of these conclusions and discuss the use of such statistical analyses for calibrating productivity and relative efficiencies within a price-cap framework. In chapter 3, I turn to the historically important problem of vertical contractual relations. While the existing literature has established that resale price maintenance is sufficient to coordinate the distribution network of a manufacturer, this chapter asks whether such vertical restraints are necessary. Specifically, I study

  18. Service quality and asymmetric information in the regulation of monopolies: The Chilean electricity distribution industry

    Science.gov (United States)

    Melo, Oscar Alfredo

    This study is an enquiry about the role that service quality, asymmetric information, scope of regulation and regulator's preferences play in the regulation of monopolies, with an application to the case of the Chilean electricity distribution industry. In Chapter 1, I present the problem of regulating a monopolist and introduce the special conditions that the electricity sector has. Later I discuss the main characteristics of the electricity system that operates in Chile. The literature on regulation is reviewed in Chapter 2. A special emphasis is given to the problems of quality and information, and the lack of its proper joint treatment. In Chapter 3, I develop four theoretical models of regulation that explicitly consider the regulation of price and quality versus price-only regulation, and a symmetric versus asymmetric information structure where only the regulator knows its true costs. In these models, I also consider the effect of a regulator that may have a preference between consumers and the regulated monopolistic firms. I conclude that with symmetric information and independent of the scope of regulation, having a regulator that prefers consumers or producers does not affect the efficiency of the outcome. I also show that the regulator's inability to set quality, thus regulating only price, leads to an inefficient outcome, away from the first best solution that can be achieved by regulating both price and quality, even with asymmetric information, as long as the regulator does not have a "biased" preference for consumers or the monopolistic producers. If the regulator has a "bias," then the equilibrium will be inefficient with asymmetric information. But the effect on equilibrium price and quality depends on the direction of the effect of quality on the marginal effect of price in demand. More importantly, no closed-form solution can be derived unless drastic simplifications are made. To further investigate the outcome of the models, I use numerical

  19. ASPECTS ON THE EFFICIENCY OF MOBILE TEAM INTERVENTIONS ON ELECTRICAL ENERGY DISTRIBUTION EQUIPMENT TOWARDS DOMESTIC AND INDUSTRIAL CONSUMERS

    OpenAIRE

    Cristinel POPESCU

    2017-01-01

    The paper aims at presenting how to coordinate intervention teams in the event of failure regimes in electric power distribution installations to domestic and industrial low voltage consumers. The work was theoretically and practically supported by an application implemented within the Faculty of Engineering and coordinated by the author.

  20. Switzerland's electricity supply industry

    International Nuclear Information System (INIS)

    Inwyler, Ch.

    1980-01-01

    After a short description of Switzerland's electricity supply industry, the author comments on the production and consumption of electrical energy as well as on Switzerland's role within the European grid. A brief survey of electricity supply as a service is followed by a discussion of the political tools (such as e.g. the referendum, the hearing procedure etc.), which are an essential clue for understanding the position of the electricity supply industry in Switzerland. (Auth.)

  1. Comparing welfare effects of different regulation schemes: An application to the electricity distribution industry

    International Nuclear Information System (INIS)

    Kopsakangas-Savolainen, Maria; Svento, Rauli

    2010-01-01

    We compare the welfare effects of different regulation schemes of electricity distribution utilities. The compared regulation schemes are Fixed Price regulation, Cost of Service regulation, Menu of Cost-Contingent Contracts and Simple Menu of Contracts. In our calculations we utilize the information of a firm's potential to improve cost efficiency. The firm-specific cost information of Finnish electricity distribution utilities is obtained by using various Stochastic Frontier models. Our basic result is that welfare can be improved by changing the Cost of Service regulation scheme to the Menu of Contracts regulation. Welfare also increases in the case of Fixed Price regulation and Simple Menu of Contract regulation. There is however, a significant difference among regulation regimes on how this improved welfare is distributed to consumers and producers.

  2. Electricity industry restructuring and distribution Grids' Take-Over. A survey of foreign case studies

    International Nuclear Information System (INIS)

    Indigenti, S.

    1999-01-01

    The paper surveys some case studies drawn from five foreign countries experience in distribution restructuring and property changes. From transaction prices has been derived the indirect distribution grid evaluation by the investors. The resulting values are widespread and cannot be taken as a sound reference for similar future property transfers in Italy. This paper may be looked at as a methodological guides that will likely shed some light on the possible implementations of the recent electricity bill 79/99 named Decreto Bersani [it

  3. Mass and elemental distributions of atmospheric particles nearby blast furnace and electric arc furnace operated industrial areas in Australia

    International Nuclear Information System (INIS)

    Mohiuddin, Kazi; Strezov, Vladimir; Nelson, Peter F.; Stelcer, Eduard; Evans, Tim

    2014-01-01

    The improved understanding of mass and elemental distributions of industrial air particles is important due to their heterogeneous atmospheric behaviour and impact on human health and the environment. In this study, particles of different size ranges were collected from three sites in Australia located in the vicinity of iron and steelmaking industries and one urban background site with very little industrial influence. In order to determine the importance of the type of industrial activity on the urban atmospheric quality, the industrial sites selected in this study were in the close proximity to two blast furnace operated and one electric arc furnace based steelmaking sites. The chemical compositions of the collected air particles were analysed using the proton induced X-ray emission (PIXE) technique. This study revealed significantly higher metal concentrations in the atmospheric particles collected in the industrial sites, comparing to the background urban site, demonstrating local influence of the industrial activities to the air quality. The modality types of the particles were found to be variable between the mass and elements, and among elements in the urban and industrial areas indicating that the elemental modal distribution is as important as particle mass for particle pollution modelling. The highest elemental number distribution at all studied sites occurred with particle size of 0.1 μm. Iron was found as the main dominant metal at the industrial atmosphere in each particle size range. The industrial Fe fraction in the submicron and ultrafine size particles was estimated at up to 95% which may be released from high temperature industrial activities with the iron and steelmaking industries being one of the major contributors. Hence, these industrial elemental loadings can highly influence the atmospheric pollution at local urban and regional levels and are required to consider in the atmospheric modelling settings. - Highlights: • Urban and

  4. Mass and elemental distributions of atmospheric particles nearby blast furnace and electric arc furnace operated industrial areas in Australia

    Energy Technology Data Exchange (ETDEWEB)

    Mohiuddin, Kazi, E-mail: kazi.mohiuddin@students.mq.edu.au [Graduate School of the Environment, Department of Environment and Geography, Faculty of Science, Macquarie University, NSW (Australia); Strezov, Vladimir; Nelson, Peter F. [Graduate School of the Environment, Department of Environment and Geography, Faculty of Science, Macquarie University, NSW (Australia); Stelcer, Eduard [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Evans, Tim [Graduate School of the Environment, Department of Environment and Geography, Faculty of Science, Macquarie University, NSW (Australia)

    2014-07-01

    The improved understanding of mass and elemental distributions of industrial air particles is important due to their heterogeneous atmospheric behaviour and impact on human health and the environment. In this study, particles of different size ranges were collected from three sites in Australia located in the vicinity of iron and steelmaking industries and one urban background site with very little industrial influence. In order to determine the importance of the type of industrial activity on the urban atmospheric quality, the industrial sites selected in this study were in the close proximity to two blast furnace operated and one electric arc furnace based steelmaking sites. The chemical compositions of the collected air particles were analysed using the proton induced X-ray emission (PIXE) technique. This study revealed significantly higher metal concentrations in the atmospheric particles collected in the industrial sites, comparing to the background urban site, demonstrating local influence of the industrial activities to the air quality. The modality types of the particles were found to be variable between the mass and elements, and among elements in the urban and industrial areas indicating that the elemental modal distribution is as important as particle mass for particle pollution modelling. The highest elemental number distribution at all studied sites occurred with particle size of 0.1 μm. Iron was found as the main dominant metal at the industrial atmosphere in each particle size range. The industrial Fe fraction in the submicron and ultrafine size particles was estimated at up to 95% which may be released from high temperature industrial activities with the iron and steelmaking industries being one of the major contributors. Hence, these industrial elemental loadings can highly influence the atmospheric pollution at local urban and regional levels and are required to consider in the atmospheric modelling settings. - Highlights: • Urban and

  5. Observed and unobserved heterogeneity in stochastic frontier models: An application to the electricity distribution industry

    International Nuclear Information System (INIS)

    Kopsakangas-Savolainen, Maria; Svento, Rauli

    2011-01-01

    In this study we combine different possibilities to model firm level heterogeneity in stochastic frontier analysis. We show that both observed and unobserved heterogeneities cause serious biases in inefficiency results. Modelling observed and unobserved heterogeneities treat individual firms in different ways and even though the expected mean inefficiency scores in both cases diminish the firm level efficiency rank orders turn out to be very different. The best fit with the data is obtained by modelling unobserved heterogeneity through randomizing frontier parameters and at the same time explicitly modelling the observed heterogeneity into the inefficiency distribution. These results are obtained by using data from Finnish electricity distribution utilities and the results are relevant in relation to electricity distribution pricing and regulation. -- Research Highlights: → We show that both observed and unobserved heterogeneities of firms cause biases in inefficiency results. → Different ways of accounting firm level heterogeneity end up with very different rank orders of firms. → The model which combines the characteristics of unobserved and observed heterogeneity fits the data best.

  6. Technical challenges for electric power industries due to grid-integrated electric vehicles in low voltage distributions: A review

    International Nuclear Information System (INIS)

    Haidar, Ahmed M.A.; Muttaqi, Kashem M.; Sutanto, Danny

    2014-01-01

    Highlights: • Grid-Integrated Vehicles (GIVs) as mobile storage systems are briefly discussed. • Comparative analysis on electric vehicles (EVs) and charging systems are provided. • It is necessary to coordinate the GIVs to minimize its impacts on power grid. • A proper load model of EVs that predicts the realistic system behavior is required. • Offering a dual tariff by grid utilities is needed as a way to reduce peak load. - Abstract: Grid-Integrated Vehicles (GIVs) are promising technologies for future Smart Grid (SG) and offer the potential to reduce the environmental impact of vehicles. The large scale deployment of GIVs without proper control of the time to charge the vehicles can result in unexpected challenges. This can lead to a disruptive impact on the current power distribution systems and in particular its substantial impacts in building power energy systems. Therefore, a proper model that predicts the realistic system behavior is required to analysis the true effects of introducing GIVs in the power grid. This paper presents a review of existing studies on GIV systems, their modeling techniques and their effects on power grids. Following a brief overview of the common types of electric vehicles (EVs) with their charging systems, a review of their impact on the low voltage distribution systems will be analyzed. The comprehensive review presented in this paper reveals that the impact of GIVs on power distribution systems can be quantified using the aspects of EVs, such as vehicle penetration, charging time, charging characteristics, driving patterns, transportation network. GIV studies are expected to be more popular in future years with the development of EV technologies and the government support to electricity utilities. Thereby, these factors will reduce the cost of energy to charge EV and enhance the practical implications of GIVs

  7. Ontario electricity industry restructuring

    International Nuclear Information System (INIS)

    1999-01-01

    The objective of Ontario's electricity industry restructuring was described as an effort to enhance Ontario's competitiveness. It is believed that restructuring can be accomplished without an increase in electricity rates. In a series of charts, the report provides the timeline of restructuring from the time of the Macdonald report in 1995 to the beginning of open competition in Ontario electricity markets. It oulines the principles underlying the financial restructuring and the financial results of restructuring, including the size of the stranded debt ($ 7.8 billion). It lists the changes that have occurred since October 1998, explains some key factors in valuing the successor companies and profiles the Ontario Electricity Financial Corporation. Restructuring of the industry is expected to have a neutral to positive impact on Ontario's fiscal position. The residual stranded debt of $7.8 billion will be retired through revenues generated by the electricity sector, without recourse to the Provincial Treasury. 9 figs

  8. Electricity Distribution Effectiveness

    Directory of Open Access Journals (Sweden)

    Waldemar Szpyra

    2015-12-01

    Full Text Available This paper discusses the basic concepts of cost accounting in the power industry and selected ways of assessing the effectiveness of electricity distribution. The results of effectiveness analysis of MV/LV distribution transformer replacement are presented, and unit costs of energy transmission through various medium-voltage line types are compared. The calculation results confirm the viability of replacing transformers manufactured before 1975. Replacing transformers manufactured after 1975 – only to reduce energy losses – is not economically justified. Increasing use of a PAS type line for energy transmission in local distribution networks is reasonable. Cabling these networks under the current calculation rules of discounts for excessive power outages is not viable, even in areas particularly exposed to catastrophic wire icing.

  9. Restructuring the Electricity Industry

    DEFF Research Database (Denmark)

    Boom, Anette; Buehler, Stefan

    We study the role of vertical structure in determining generating capacities and retail prices in the electricity industry. Allowing for uncertain demand, we compare three market configurations: (i) integrated monopoly, (ii) integrated duopoly with wholesale trade, and (iii) separated duopoly wit...

  10. Electric industry restructuring review

    International Nuclear Information System (INIS)

    Slocum Hollis, S.

    2004-01-01

    Restructuring of the electric power industry began in the early 1990's in many jurisdictions in the United States. Restructuring was an attempt to offer large industrial customers lower rates and freedom from regulation for generators and traditional public utilities. The move has gained most attention in the past two years as some utilities report high profits while others, such as Pacific Gas and Electric Co., the largest investor-owned utility in the United States, is in bankruptcy. The August 2003 blackout in the Midwest and Northeast United States and Canada also raised questions regarding electric reliability. The question now remains whether markets should be allowed to determine the need for services and the prices to be charged, and who is in charge in the imperfect market. The Federal Energy Regulatory Commission's (FERC) Order 2000 led to the formation of a Regional Transmission Organizations which is still in the implementation stage. Its influence on precursor Order numbers 888 and 889 were discussed in this paper with reference to independent system operators; regional transmission organizations; standard market design; rates and pricing devices; congestion management; market monitoring; market investigations; reliability measures; OASIS and other information access; interconnection policy; jurisdiction; mergers and merger policy; standards of conduct; policing affiliates; municipal utilities; stranded costs; and, state restructuring scorecards. refs

  11. Costs and Operating Dynamics of Integrating Distributed Energy Resources in Commercial and Industrial Buildings with Electric Vehicle Charging

    Science.gov (United States)

    Flores, Robert Joseph

    Growing concerns over greenhouse gas and pollutant emissions have increased the pressure to shift energy conversion paradigms from current forms to more sustainable methods, such as through the use of distributed energy resources (DER) at industrial and commercial buildings. This dissertation is concerned with the optimal design and dispatch of a DER system installed at an industrial or commercial building. An optimization model that accurately captures typical utility costs and the physical constraints of a combined cooling, heating, and power (CCHP) system is designed to size and operate a DER system at a building. The optimization model is then used with cooperative game theory to evaluate the financial performance of a CCHP investment. The CCHP model is then modified to include energy storage, solar powered generators, alternative fuel sources, carbon emission limits, and building interactions with public and fleet PEVs. Then, a separate plugin electric vehicle (PEV) refueling model is developed to determine the cost to operate a public Level 3 fast charging station. The CCHP design and dispatch results show the size of the building load and consistency of the thermal loads are critical to positive financial performance. While using the CCHP system to produce cooling can provide savings, heat production drives positive financial performance. When designing the DER system to reduce carbon emissions, the use of renewable fuels can allow for a gas turbine system with heat recovery to reduce carbon emissions for a large university by 67%. Further reductions require large photovoltaic installations coupled with energy storage or the ability to export electricity back to the grid if costs are to remain relatively low. When considering Level 3 fast charging equipment, demand charges at low PEV travel levels are sufficiently high to discourage adoption. Integration of the equipment can reduce demand charge costs only if the building maximum demand does not coincide

  12. Electric power distribution handbook

    CERN Document Server

    Short, Thomas Allen

    2014-01-01

    Of the ""big three"" components of electrical infrastructure, distribution typically gets the least attention. In fact, a thorough, up-to-date treatment of the subject hasn't been published in years, yet deregulation and technical changes have increased the need for better information. Filling this void, the Electric Power Distribution Handbook delivers comprehensive, cutting-edge coverage of the electrical aspects of power distribution systems. The first few chapters of this pragmatic guidebook focus on equipment-oriented information and applications such as choosing transformer connections,

  13. Energy conservation in electric distribution

    International Nuclear Information System (INIS)

    Lee, Chong-Jin.

    1994-01-01

    This paper discusses the potential for energy and power savings that exist in electric power delivery systems. These savings translate into significant financial and environmental benefits for electricity producers and consumers as well as for society in general. AlliedSignal's knowledge and perspectives on this topic are the result of discussions with hundreds of utility executives, government officials and other industry experts over the past decade in conjunction with marketing our Amorphous Metal technology for electric distribution transformers. Amorphous metal is a technology developed by AlliedSignal that significantly reduces the energy lost in electric distribution transformers at an incremental cost of just a few cents per kilo-Watt-hour. The purpose of this paper is to discuss: Amorphous Metal Alloy Technology; Energy Savings Opportunity; The Industrial Barriers and Remedies; Worldwide Demand; and A Low Risk Strategy. I wish this presentation will help KEPCO achieve their stated aims of ensuring sound development of the national economy and enhancement of public life through the economic and stable supply of electric power. AlliedSignal Korea Ltd. in conjunction with AlliedSignal Amorphous Metals in the U.S. are here to work with KEPCO, transformer manufacturers, industry, and government agencies to achieve greater efficiency in power distribution

  14. Electric industry in 1992

    International Nuclear Information System (INIS)

    1993-01-01

    The production of electricity in 1992 is analyzed. The increase (0,4%) of electricity consumption and the decrease of its production are the main characteristics of 1993 in Spain. These aspect with the UNESA data are studied. In 1992 30000 Kw of 216.505 Kw total were produced by wind mills

  15. Electric power industry in China

    Energy Technology Data Exchange (ETDEWEB)

    Zisheng Jiang [Ministry of Electric Power, Beijing (China). Bureau of Electric Power Machinery

    1995-07-01

    This document presents the status of the electric power in China, highlighting the following aspects: recent achievement, electricity increased sharing in the total energy consumption, technical economic indexes, nuclear power, renewable energy sources, rural electrification, transmission and power network, transmission lines and substations, present status and development trends for power network, regulation of power system dispatching, power system communication. The document also presents the future developing plan, approaching the outlook and strategy, development targets of the electric power industry and the administrative system reforming of the electric power industry.

  16. Electrical distribution system management

    International Nuclear Information System (INIS)

    Hajos, L.; Mortarulo, M.; Chang, K.; Sparks, T.

    1990-01-01

    This paper reports that maintenance of electrical system data is essential to the operation, maintenance, and modification of a nuclear station. Load and equipment changes affect equipment sizing, available short-circuit currents and protection coordination. System parameters must be maintained in a controlled manner to enable evaluation of proposed modifications and provide adequate verification and traceability. For this purpose, Public Service Electric and Gas Company has implemented a Verified and Validated Electric Distribution System Management (EDSM) program at the Hope Creek and Salem Nuclear Power Stations. EDSM program integrates computerized configuration management of electrical systems with calculational software the Technical Standard procedures. The software platform is PC-based. The Database Manager and Calculational programs have been linked together through a user friendly menu system. The database management nodule enable s assembly and maintenance of databases for individual loads, buses, and branches within the electrical systems with system access and approval controlled through electronic security incorporated within the database manger. Reports drawn from the database serve as the as-built and/or as-designed record of the system configurations. This module also creates input data files of network parameters in a format readable by the calculational modules. Calculations modules provide load flow, voltage drop, motor starting, and short-circuit analyses, as well as dynamic analyses of bus transfers

  17. World electricity and gas industries

    International Nuclear Information System (INIS)

    Kahane, A.

    1990-01-01

    Electric and gas utilities are central middlemen in the energy business. Worldwide, more than 50% of all primary energy is transformed by utilities and delivered to final consumers through utility wires and pipes. The structure and behavior of the electricity and gas industries and the role and behavior of utilities are therefore important to all other energy industry players. The electricity and gas industries are special. Unlike oil, coal, or wood, electricity and gas are transported from producers to consumers mostly via fixed grids. This means that supplies are generally tied to specific markets and, unlike an oil tanker on the high seas, cannot be easily diverted elsewhere. These grids are natural monopolies inasmuch as having more than one wire or pipe along a given route is generally unnecessary duplicative. In addition, both supply and grid investments are generally large and lumpy. Industrial organization theory suggests that the coordination of industries can be achieved either through hierarchies or through markets. Hierarchies are generally preferred when the transaction costs of coordinating through markets is too high. These two elements of electricity and gas industry structure are the means of hierarchical coordination. This paper discusses the possibilities for changing the structure of utilities to one which has greater reliance on markets

  18. Benchmarking electricity distribution

    Energy Technology Data Exchange (ETDEWEB)

    Watts, K. [Department of Justice and Attorney-General, QLD (Australia)

    1995-12-31

    Benchmarking has been described as a method of continuous improvement that involves an ongoing and systematic evaluation and incorporation of external products, services and processes recognised as representing best practice. It is a management tool similar to total quality management (TQM) and business process re-engineering (BPR), and is best used as part of a total package. This paper discusses benchmarking models and approaches and suggests a few key performance indicators that could be applied to benchmarking electricity distribution utilities. Some recent benchmarking studies are used as examples and briefly discussed. It is concluded that benchmarking is a strong tool to be added to the range of techniques that can be used by electricity distribution utilities and other organizations in search of continuous improvement, and that there is now a high level of interest in Australia. Benchmarking represents an opportunity for organizations to approach learning from others in a disciplined and highly productive way, which will complement the other micro-economic reforms being implemented in Australia. (author). 26 refs.

  19. The internationalization of the electricity industry

    International Nuclear Information System (INIS)

    Gulli, F.; Indigenti, S.; Ninni, A.

    1998-01-01

    During the last years the evolution of the electricity industry has been featured by a marked development of the internationalization processes. Several companies started huge foreign investment programmes; construction of power plants; acquisition of generation, distribution and integrated companies. The goal of this study is to analyse the determinants in the internationalization process of the world electricity industry. This topic is introduced in the first, part with a hint on the main theoretical contributions regarding the companies internationalization. In the second part, an attempt is made to define the size of the phenomenon adopting the results yielded by a detailed inquiry about the international strategies of the leading electric companies. In the third part, an econometric analysis, referring to a significant sample of electric companies, is aimed at identifying the main determining factors affecting the international development is mainly due to both organization and regulation of the single national markets [it

  20. Optimizing electrical distribution systems

    International Nuclear Information System (INIS)

    Scott, W.G.

    1990-01-01

    Electrical utility distribution systems are in the middle of an unprecedented technological revolution in planning, design, maintenance and operation. The prime movers of the revolution are the major economic shifts that affect decision making. The major economic influence on the revolution is the cost of losses (technical and nontechnical). The vehicle of the revolution is the computer, which enables decision makers to examine alternatives in greater depth and detail than their predecessors could. The more important elements of the technological revolution are: system planning, computers, load forecasting, analytical systems (primary systems, transformers and secondary systems), system losses and coming technology. The paper is directed towards the rather unique problems encountered by engineers of utilities in developing countries - problems that are being solved through high technology, such as the recent World Bank-financed engineering computer system for Sri Lanka. This system includes a DEC computer, digitizer, plotter and engineering software to model the distribution system via a digitizer, analyse the system and plot single-line diagrams. (author). 1 ref., 4 tabs., 6 figs

  1. Highlights of Electric Power Industry in China

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@Reform and Development of Electric Power Management Before 1978, China's electric power industry,managed by the Central Government, was a vertically monopoly sector. Along with China's reformation of economy structure started in 1978, electric power industry has step on its road of restructuring and deregulation. Up to now administration of China's electric power industry underwent following reciprocative changes:

  2. Protection of electricity distribution networks

    CERN Document Server

    Gers, Juan M

    2004-01-01

    Written by two practicing electrical engineers, this second edition of the bestselling Protection of Electricity Distribution Networks offers both practical and theoretical coverage of the technologies, from the classical electromechanical relays to the new numerical types, which protect equipment on networks and in electrical plants. A properly coordinated protection system is vital to ensure that an electricity distribution network can operate within preset requirements for safety for individual items of equipment, staff and public, and the network overall. Suitable and reliable equipment sh

  3. Turmoil and transition: Electric utility industry trends

    International Nuclear Information System (INIS)

    1994-06-01

    In a review of electric utility industry trends, focusing on North America, it is noted that four critical influences are dominant: competition in the electricity supply business; technological advances; the recognized need for environmental protection; and a favoring of market economics and customer choice. As energy costs rose in the 1970s and 1980s, electricity usage growth rates decreased and demand side management became an accepted alternative to building new power plants. In large areas of Canada and the USA, substantial surplus generation capacity arose, transmission linkages improved, and regional electricity markets developed. Privatization measures in the British electric sector were closely studied in North America and electric markets in the USA were pushed toward more competition with the 1992 Energy Policy Act. Non-utility generators have entered the market, including industrial companies, pipeline companies, independent renewable-energy providers, and power companies set up by the utilities themselves. Power pools may evolve into regional transmission grids in which the transmission owning utilities would exchange their lines for an interest in the grid. California is likely to lead in opening access to transmission on a regional scale. Distribution systems are likely to remain a regulated monopoly as before. Substantial change is expected in customer services as functions such as power purchase and conservation are being performed by independent companies. Other possible developments in the industry include emissions trading and spot markets for power. The implications of these trends for British Columbia Hydro are discussed

  4. Alberta electric industry annual statistics for 1998

    International Nuclear Information System (INIS)

    1999-06-01

    Tables containing data on electric energy generation and capacity for Alberta are provided for the following aspects: capacity and generation of power plants for 1998; capacity of power plants by type, unit, and energy resource for 1998; generating units approved for construction for 1998; generating units completed in 1998; transmission additions approved for construction and completed for 1998; net annual generating capacity and generation for 1988-1998; net monthly generation by plant for 1998; net annual generation by energy resource and type for 1988-1998; net monthly generation by energy resource and type for 1998; generation capacity reserve; relative capacity and generation by type of energy resource for 1998; capacity, generation and fuel consumption of isolated plants for 1998; other industrial on-site plant capacity and generation for 1998. Also listed are: energy resource consumption and energy conversion efficiency of thermal power plants for 1998; stack emissions from thermal generating plants for 1998; non-utility electric generators, wind and hydro for 1998; and hydroelectric energy utilization and conversion efficiency for 1998. Tables contain information on electric energy generation and capacity for hydroelectric energy stored in reservoirs in 1998; details of non-coincident net peak generation and load by utility operators for the Alberta electric system for 1998; and Alberta electric system generation and load at peak load hour for 1998. Further tables cover electric energy distribution for interchange and distribution for 1998 and 1981-1998; annual energy distribution to ultimate customers for 1988-1998 and to ultimate customers for 1998; and the number of electric utility customers in 1998. Final tables cover the transmission and distribution systems with data on: circuit km of such lines for 1988-1998; total circuit km of such lines by major electric utility for 1998 and number of rural electric utility customers for 1998

  5. Protection of electricity distribution networks

    CERN Document Server

    Gers, Juan; Institution of Engineering and Technology

    2011-01-01

    Combining a theoretical background with examples and exercises, this book allows the reader to easily follow requirements for high quality electrical service in utilities and industrial facilities around the world.

  6. Competition in the electric industry

    International Nuclear Information System (INIS)

    Jones, Mel

    1998-01-01

    Deregulation of the electric power industry is changing the 'personality' of utilities and the way they operate in order to survive in a more competitive marketplace. This paper will identify and discuss key issues NAC International believes will arise as the nuclear industry responds to deregulation. The regulatory treatment of such issues as retail wheeling, recovery of stranded costs, divestiture of assets and securitization will have a significant impact on how utilities, particularly those with nuclear assets, proceed into the new marketplace. While some will survive as a result of innovative thinking, cost control, and entrance into new niche markets, others will be forced to reassess their viability altogether. Increased mergers and acquisitions and early plant closures are potential consequences of these struggles. Meanwhile, innovative companies will develop and enter into new nuclear markets including most notably the acquisition of generating assets. Other key drivers that will significantly impact the competitiveness of nuclear versus other fuels will be the resolution of the nuclear waste issue, the reduction of O and M and decisions regarding whether to make expensive capital additions. Additionally, this paper will present an overview of key regulatory and legislative initiatives impacting electricity. Finally, this paper will examine the roles of regulating bodies such as the Nuclear Regulatory Commission, Federal Energy Regulatory Commission, and state utility commissions, and will provide an outlook for further legislative and regulatory actions in this competitive environment. (author)

  7. Some perspectives on the electric industry

    Energy Technology Data Exchange (ETDEWEB)

    Winer, J.H. [Mountain Energy, Inc., South Burlington, VT (United States)

    1996-12-31

    Opinions regarding future directions of the U.S. electric utility industry are presented in the paper. Pertinent historical aspects and current industry rules are summarized. Major issues and trends in the electricity market are outlined, and recommendations are presented. It is concluded that new rules in the industry will be set directly by customers, and that customers want renewable energy resources.

  8. Export of electric power through industrial products

    International Nuclear Information System (INIS)

    Azevedo, J.B.L. de; David, J.M.S.; Campos, J.M.; Perecmanis, J.; Carneiro, N.S.

    1990-01-01

    We forecast the electrical energy incorporated to the exports of products of the industrial sectors of steel, aluminium, ferro-alloys, chlorine and caustic soda, pulp and paper and petrochemistry, accordingly to scenarios for these sectors consistent with a macro economic reference scenario, for the period 1990/2000. We also compare the electrical energy exported through those industrial products with the forecasted industrial and total markets of electrical energy. (author)

  9. Electricity demand savings from distributed solar photovoltaics

    International Nuclear Information System (INIS)

    Glassmire, John; Komor, Paul; Lilienthal, Peter

    2012-01-01

    Due largely to recent dramatic cost reductions, photovoltaics (PVs) are poised to make a significant contribution to electricity supply. In particular, distributed applications of PV on rooftops, brownfields, and other similar applications – hold great technical potential. In order for this potential to be realized, however, PV must be “cost-effective”—that is, it must be sufficiently financially appealing to attract large amounts of investment capital. Electricity costs for most commercial and industrial end-users come in two forms: consumption (kWh) and demand (kW). Although rates vary, for a typical larger commercial or industrial user, demand charges account for about ∼40% of total electricity costs. This paper uses a case study of PV on a large university campus to reveal that even very large PV installations will often provide very small demand reductions. As a result, it will be very difficult for PV to demonstrate cost-effectiveness for large commercial customers, even if PV costs continue to drop. If policymakers would like PV to play a significant role in electricity generation – for economic development, carbon reduction, or other reasons – then rate structures will need significant adjustment, or improved distributed storage technologies will be needed. - Highlights: ► Demand charges typically account for ∼40% of total electricity costs for larger electricity users. ► Distributed photovoltaic (PV) systems provide minimal demand charge reductions. ► As a result, PVs are not a financially viable alternative to centralized electricity. ► Electricity rate structures will need changes for PV to be a major electricity source.

  10. Proposal for the award of an industrial services contract for electrical installation work and maintenance of lighting and low-voltage distribution

    CERN Document Server

    2000-01-01

    This document concerns the award of an Industrial Services contract for electrical installation work and maintenance of lighting and low-voltage distribution. Following a market survey carried out among 127 firms in fifteen Member States, a call for tenders (IT-2754/ST) was sent on 2 June 2000 to three firms and four consortia, each consisting of two firms, in four Member States. By the closing date, CERN had received tenders from two firms and two consortia in four Member States. The Finance Committee is invited to agree to the negotiation of a contract with the consortium SPIE TRINDEL(FR) ? CONTROLMATIC (DE), the lowest bidder complying with the specified requirements, for an initial period of three years from 1 July 2001 for a total amount of 41 705 497 Swiss francs, not subject to revision until 31 December 2003. The contract will include options for two one-year extensions beyond the initial three-year period for a total amount of 27 803 664 Swiss francs, for which CERN will seek approval by the Finance ...

  11. Ontario electricity rates and industrial competitiveness

    International Nuclear Information System (INIS)

    2006-01-01

    Industrial electricity prices in Ontario rose significantly after the opening of the competitive Ontario electricity market in 2002, thereby widening the gap between industrial electricity prices in Ontario and those in other Canadian provinces. Navigant Consulting Ltd. conducted this study at the request of the Association of Major Power Consumers in Ontario (AMPCO) to research and compare current and historical electricity prices in Ontario and other jurisdictions in North America. The study provided an independent analysis of how industrial electricity prices in Ontario compare to those in other jurisdiction in which AMPCO members operate. It also formed the basis for comparing the impacts of electricity policy on the economic competitiveness of major power consumers in Ontario. The relative electricity intensity in the United States, Ontario and other Canadian provinces was reviewed for specific industries, including forest products, steel manufacturing, petroleum refining, chemical manufacturing and cement manufacturing. Publicly available aggregate data from Statistics Canada and the United States Bureau of the Census was then used to compare average electricity prices for industrial customers in Ontario. The data confirmed that Ontario has experienced a decline in its competitive price advantage in industrial electricity. Delivered industrial electricity prices in Ontario have increased by more than 60 per cent since 2001. Industrial electricity prices in Ontario rose above those in Quebec, Manitoba, British Columbia and New Brunswick. In addition, industrial electricity prices in Ontario rose above those in competing states such as Ohio and Illinois, in part due to the increase in the value of the Canadian dollar. It was concluded that the price increase may lead to a greater decline in economic output in Ontario compared to competing jurisdictions. 2 tabs., 14 figs., 1 appendix

  12. Outlook for California's electric utility industry

    International Nuclear Information System (INIS)

    Frank, S.E.

    1996-01-01

    This article describes how the Southern California Edison Company deals with revolutionary change as the state's electricity industry reinvents itself. The topics of the article include how competition has make things better for SCEC's employees, customers, and shareholders, and an outline of the principal features of the electric utility industry in California

  13. A generalization information management system applied to electrical distribution

    Energy Technology Data Exchange (ETDEWEB)

    Geisler, K.I.; Neumann, S.A.; Nielsen, T.D.; Bower, P.K. (Empros Systems International (US)); Hughes, B.A.

    1990-07-01

    This article presents a system solution approach that meets the requirements being imposed by industry trends and the electric utility customer. Specifically, the solution addresses electric distribution management systems. Electrical distribution management is a particularly well suited area of application because it involves a high diversity of tasks, which are currently supported by a proliferation of automated islands. Islands of automation which currently exist include (among others) distribution operations, load management, automated mapping, facility management, work order processing, and planning.

  14. Electrical power systems for distributed generation

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, T.A.; Huval, S.J. [Stewart & Stevenson Services, Inc., Houston, TX (United States)

    1996-12-31

    {open_quotes}Distributed Generation{close_quotes} has become the {open_quotes}buzz{close_quotes} word of an electric utility industry facing deregulation. Many industrial facilities utilize equipment in distributed installations to serve the needs of a thermal host through the capture of exhaust energy in a heat recovery steam generator. The electrical power generated is then sold as a {open_quotes}side benefit{close_quotes} to the cost-effective supply of high quality thermal energy. Distributed generation is desirable for many different reasons, each with unique characteristics of the product. Many years of experience in the distributed generation market has helped Stewart & Stevenson to define a range of product features that are crucial to most any application. The following paper will highlight a few of these applications. The paper will also examine the range of products currently available and in development. Finally, we will survey the additional services offered by Stewart & Stevenson to meet the needs of a rapidly changing power generation industry.

  15. Continuous Improvement and its Barriers in Electrical and Electronic Industry

    Directory of Open Access Journals (Sweden)

    Ahmad Md Fauzi

    2017-01-01

    Full Text Available Continuous improvement is one of the core strategies for manufacturing excellent and it is considered vital in today’s business environment. Continuous improvement is an important factor in TQM implementation. However, manufacturers in Electrical and Electronic Industry is facing variety of challenges such as, time constraint, quality issue, headcount issue, human issue and competition in domestic as well as the global market. This paper presents total quality management practices in Electrical and Electronic (EE Industry. These manufacturers have to keep improving in key activities and processes to cope the challenges. Therefore, EE industry realize the importance of continuous improvement in helping the industries by setting clear goals and priorities for the area of improvement. The aims of this study are to determine the main factor in implementing continuous improvement practices, identify tools of continuous improvement that have been used and their obstacle in implementing continuous improvement practices. 200 questionnaires had been distributed to the employees in Electrical and Electronic Industry located at Bayan Lepas, Penang, Malaysia. A total of 41 questionnaires were answered which represented about 20.5% response rates. Survey result shows that teamwork and training and learning are respectively the importance factor and the most practices factor in Electrical and Electronic Industry. Most of the Electrical and Electronic Industry emphasis is on using Lean Manufacturing as the tool of continuous improvement practices. Besides that, Electrical and Electronic Industry faced the problems of lack of budget and lack of worker commitment.

  16. Industry's use of electric power

    International Nuclear Information System (INIS)

    1986-10-01

    Alternative energy supplies and adaptation to energy demand are elucidated, primarily concerning space heating and industry. The consequences of the alternatives on the economic development of Sweden, the growth of industry, the situation of households and the effects of health and environment are being analysed. It is concluded that considerable portions of the industry will loose their competitive advantages. There will be restricted possibilities to solve the technical adaptation to the year 1997

  17. Environmental problems facing the electricity industry

    International Nuclear Information System (INIS)

    Johnson, S.

    1988-01-01

    The paper on the environmental problems facing the electricity industry was first presented at the World Electricity Conference, Nov. 1987. According to the author, the biggest immediate environmental challenge the electricity industry faces is the need for the role and importance of nuclear power to be reasserted clearly and unambiguously. The main environmental problems from electricity generation are air pollution and the carbon dioxide/greenhouse issue, and the author thinks that both could be reduced by an increased use of nuclear power as an energy source. (U.K.)

  18. Transmission and distribution electrical engineering

    CERN Document Server

    Bayliss, Colin

    2003-01-01

    This comprehensive treatment of the theory and practice encountered in the installation and design of transmission and distribution systems for electrical power has been updated and revised to provide the project engineer with all the latest, relevant information to design and specify the correct system for a particular application.Thoroughly updated and revised to include latest developmentsLearn from and Author with extensive experience in managing international projectsFind out the reasoning and implicatons behind the different specifications and methods

  19. Electric power distribution. Elektrische Energieverteilung

    Energy Technology Data Exchange (ETDEWEB)

    Fricke, H; Frohne, H; Vaske, P

    1982-01-01

    The first chapter on electric power supply networks discusses transmitting media, their characteristic values, and the dimensioning of electric lines and networks; cables are given particular attention. High-voltage d.c. transmission and reactive power compensation are discussed. The next chapter describes the calculation of short-circuits and earth leakages for various neutral circuits on the basis of symmetric components. The newly introduced mesh current method for complex calculation of electric networks makes use of the potential of pocket computers. Chapter 3 discusses protective devices, i.e. earth systems and electronic protection. The next two chapters describe switch gear and power plants, including recent technical changes. The final chapter, which discusses the electric power industry, has been rewritten and extended. Methods of calculation, e.g. annual cost and cash value, are applied to transmitting media and plants. There is an extensive appendix with characteristic values of cables and overhead lines, graphical symbols, distinguishing signs of wiring diagrams, a bibliography of books, DIN standards, VDE specifications, and formulas.

  20. Commercial and industrial electric installations

    International Nuclear Information System (INIS)

    Carvajal, Carreno; William

    2000-01-01

    The proliferation of computers and other sensitive elements in the office ambient and of factory it has fomented the necessity to design the electric systems of the buildings considering topics of quality in the supply of the electric power (Power Quality). Exists great quantity of literature regarding the diagnosis and solution of quality problems of the supply in existent structures, but little allusion is made, to the design considerations to minimize this problem from the construction moment. The main focus of this article is of wired technical and on setting to earth recommended for the design of new structures

  1. Electric industry restructuring in Michigan

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    This Staff Report suggests a modified approach designed to significantly increase the ability of all customer classes to participate and share in the benefits of competition. The concepts discussed in this Report are designed to ensure that rates are not increased for any customers as a result of restructuring and, where possible, rates are reduced through the use of rate reduction bonds. The program outlined in this Report is designed to fulfill five objectives. First, it protects the interests of smaller customers, including low-income residential customers and senior citizens. Second, the program provides opportunities to strengthen Michigan's business community. Third, the program includes funding for employee retraining to assure that utility employees are not negatively impacted by restructuring. Fourth, the phase-in program provides the utilities with the opportunity to prepare for competition so that they remain Michigan-based companies. Fifth, the program is designed to foster competition upon a level playing field. The Commission has jurisdiction over all investor electric utilities and rural electric cooperatives in Michigan. Municipal electric utilities are not subject to Commission jurisdiction. Although this Report discusses details regarding Consumers Power and Detroit Edison, its concepts and principles are intended to apply to all jurisdictional electric utilities

  2. An introduction to electric industry restructuring

    Energy Technology Data Exchange (ETDEWEB)

    Eisenberg, J.F.; Berry, L.G.

    1997-09-01

    This paper briefly describes the electric industry, its residential markets, industry structure and current trends. Its purpose is to provide Weatherization grants managers with the background necessary to assess their leveraging opportunities in an industry that is experiencing sweeping changes, commonly known as electric industry restructuring. The study describes the terrain of a changing industry topography on a national and regional basis, with some state and local information also provided. Weatherization managers and subgrantees who read this paper should be better able to understand the leveraging opportunities that are emerging now in the electricity market place. The reader will be introduced to the basics of the electric industry as it presently operates, the nature of the changes that are in the process of occurring, and the driving forces that are behind those changes. The major industry players are described by type and their interests are explored in further depth. There will also be an overview of the regulatory process as it has operated historically, as well as the changes now underway at both the state and federal levels. Finally, the paper will conclude with a description of some of the assets and opportunities available to those who may be interested in participating in the restructuring process in order to expand or protect low-income programs in their own states.

  3. Distributed generation and its implications for the utility industry

    CERN Document Server

    Sioshansi, Fereidoon P

    2014-01-01

    Distributed Generation and its Implications for the Utility Industry examines the current state of the electric supply industry; the upstream and downstream of the meter; the various technological, business, and regulatory strategies; and case studies that look at a number of projects that put new models into practice. A number of powerful trends are beginning to affect the fundamentals of the electric utility business as we know it. Recent developments have led to a fundamental re-thinking of the electric supply industry and its traditional method of measuring consumption on a volumetric basis. These developments include decreasing electricity demand growth; the rising cost of fossil fuels and its impact on electricity costs; investment in energy efficiency; increasing numbers of prosumers who generate for some or all of their own needs; and market reforms. This book examines the implications of these trends in chapters focusing on distributed and decentralized generation, transactive energy, the role of ele...

  4. Industrial structure and privatisation of the Slovenian electricity industry

    International Nuclear Information System (INIS)

    Hrovatin, N.

    1999-01-01

    The paper first analyses the existing structure of the Slovenian electricity industry and gives recommendations for its restructuring so as to conform to efficiency criteria and to comply with European Union provisions on the internal European electricity market. Then the paper outlines the necessity for privatisation and draws some conclusions on it such as determination of market values companies, the proportion for sale, privatisation methods and the general public's participation [it

  5. Institutional and programmatic suggestions for satisfying public policy responsibilities in a retail competitive electric industry

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, B.E.; Schweitzer, M. [Oak Ridge National Lab., TN (United States)

    1997-01-01

    The emergence of retail competition in the US electric power industry places at risk various environmental and social programmes such as demand side management, low income programmes and renewable energy. This paper presents institutional and programmatic suggestions for satisfying these kinds of public policy responsibilities in a disintegrated industry. Suggestions include customer owned electricity franchises, electricity facility siting marketplaces, electric industry foresight councils, model systems programmes, integrated social services programmes, collaborative electric service programmes, ISO standards and portfolio standards. These recommendations would be funded by a national transmission charge, a state level distribution charge and franchise level sales taxes, to be paid by transmission organizations, distribution organizations and electricity consumers, respectively. (author)

  6. Grappling with Change: The South African Electricity Supply Industry

    Energy Technology Data Exchange (ETDEWEB)

    Galen, P. S.

    1998-11-01

    This paper reviews the debate over the future structure of the South African electricity supply industry (ESI) with focus on the electricity distribution industry (EDI) segment. The importance of both new and old institutions in the ESI in facilitating change is discussed. The perspective is that of an outside observer who spent nearly 2 years following events in the South African ESI. The ESI situation reviewed here is very complex and connected to a myriad of other economic, financial, cultural, social, and political issues.

  7. Grappling with Change: The South African Electricity Supply Industry

    International Nuclear Information System (INIS)

    Galen, Paul S.

    1998-01-01

    This paper reviews the debate over the future structure of the South African electricity supply industry (ESI) with focus on the electricity distribution industry (EDI) segment. The importance of both new and old institutions in the ESI in facilitating change is discussed. The perspective is that of an outside observer who spent nearly 2 years following events in the South African ESI. The ESI situation reviewed here is very complex and connected to a myriad of other economic, financial, cultural, social, and political issues

  8. The electricity supply industry in Queensland, financial report 1982/83

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    This fourth financial report deals with the finances of the electricity supply industry and includes three sections. Section 1: letter to the minister; scope of the report; the Commission; the electricity authorities; forecasts; tariff policy; and the Queensland Electricity Supply Industry Superannuation Board. Section 2: consolidated schedules; and audited financial statements. Section 3: statistics; including production, distribution, consumption, financial, accidents, towns and locations.

  9. Using restructured electricity supply industries to understand oligopoly industry outcomes

    International Nuclear Information System (INIS)

    Wolak, Frank A.

    2010-01-01

    This paper argues that many determinants of generic oligopoly market outcomes can be studied in bid-based wholesale electricity markets under much weaker assumptions than in other oligopoly industries because of their rich data, regulatory history, and clearly specified market rules. These methods are compared to those used in existing studies of oligopolistic industries where the best data available are market-clearing prices and quantities and demand and cost shifters. The extent to which the methods used in bid-based wholesale electricity markets generalize conventional methods is explained in detail and major applications of these techniques are summarized. Lessons from the study of wholesale electricity markets for the monitoring and design of other oligopolistic markets are also discussed. (author)

  10. Tradable allowances in a restructuring electric industry

    International Nuclear Information System (INIS)

    Tschirhart, J.

    1999-01-01

    The SO 2 tradable allowance program has been introduced into an electric industry undergoing dramatic changes. Entry of nonutilities into the industry and the emergence of stranded costs are two major changes that are shown to have an impact on the market for allowances and the industry's incentives to switch to cleaner fuels. The degree of impact depends on the extent to which consumers bypass traditional utilities and buy from entrants, and on public utility commission policies regarding the recovery of stranded costs. In turn, the amount of stranded costs depends on fuel switching. The results follow from simulations of a two-utility model that illustrate the qualitative effects of changing policies

  11. Industrial consumers and electricity sector deregulation

    International Nuclear Information System (INIS)

    Jukic, A.

    1999-01-01

    The paper presents the electricity sector deregulation from the point of view of major industrial consumers (MIC). Possibilities and limitations of MIC's impact on the introduction and development of an open power market in some European countries, the USA and Croatia are discussed. (author)

  12. The value of electricity distribution networks

    International Nuclear Information System (INIS)

    De Paoli, L.

    2000-01-01

    This article presents the results of a study aimed at evaluating parts of the distribution network of ENEL, in charge of distributing and supplying electricity to its captive market, that could be sold as a separate entity. To determine the asset value of these hypothetical companies, the discounted cash flow method has been used applied to the 147 ENEL's distributing zones. The econometric analysis shows that the relevant variables are the quantity sold to non residential and non big industrial consumers and the length of medium voltage lines. According to the available data and to the methodology chosen, the per client value of the distribution zones of ENEL varies substantially. The maximum value is bout three times the mean value and the minimum value is largely negative. The article maintains that changes in regulation could greatly modify the asset value of distribution networks. The main regulatory risks are linked to the degree of market opening, the introduction of compensation mechanisms between different distributors and the allowed maximum revenue fixed by energy Authority for a given period of time. This point is developed in the appendix where it is shown that the price cap method is decided on the basis of a rate of return which is valid at the moment of the cap fixing but that could be no longer valid if the rate of inflation varies [it

  13. The electric power industry in Norway

    International Nuclear Information System (INIS)

    Baleo, J.N.; Anthoine, K.; Vallon, D.; Baleo, V.

    2003-03-01

    As more than 99% of the electric power in Norway come from the hydro energy, the climatic conditions influence the energy prices. Since 1996 and because of an increasing consumption, the country needs to import electric power from Sweden, Denmark, Finland and for a little part Russia. This report evaluates the today situation, the distribution and production sources, the regulations, the Government policy and the research programs concerning the ''classical energy sources'' and the renewable energies. (A.L.B.)

  14. Values in the electric power industry

    Energy Technology Data Exchange (ETDEWEB)

    Sayre, K. (ed.)

    1977-01-01

    A basic conclusion established by the seven essays presented is that nowhere within the complex decision-making process of the electric power industry is there any provision for systematically considering the curtailment of consumption as a serious alternative to continued expansion of power production. Six recommendations are summarized for concrete steps toward remedying this deficiency as a result of examining the essays. Continued expansion of power generation could result in desirable consequences of economic growth, jobs, ready transportation, and many consumer conveniences; undesirable consequences are: increasing air and water pollution, further depletion of nonrenewable resources, and increased dependence on foreign sources of energy. The papers are: A Cybernetic Analysis of Certain Energy Consumption Patterns, by Kenneth Sayre; Social and Environmental Value in Power Plant Licensing: A Study in the Regulation of Nuclear Power by Vaughn McKim; Legal and Economic Aspects of the Electric Utility's ''Mandate to Serve'', by Charles Murdock; Economies of Scale in the Electric Power Industry, by Kenneth Jameson; Dynamics of Growth in the U.S. Electric Power Industry, by Ellen Maher; Utilitarianism and Cost-Benefit Analysis: An Essay on the Relevance of Moral Philosophy to Bureaucratic Theory, by Alasdair MacIntyre; and An Ethical Analysis of Power Company Decision-Making, by Kenneth Goodpaster and Kenneth Sayre. (MCW)

  15. Technical results French electricity supply industry 2007

    International Nuclear Information System (INIS)

    2008-01-01

    This booklet presents provisional results for the French electricity supply industry (excluding overseas territories). Data come from measures made by RTE, completed by various actors of the power system and by estimations made by RTE. Data from 2001 to 2005 were updated in order to take into account additional information given by different actors of the electrical energy sector. Contents: 1 - General results in France (National consumption, Physical exchanges with foreign countries, Net generation, Energy consumed, Electrical energy balance in France, Energy generated); 2 - Consumption in France (Annual consumption, Weekly consumption in 2007, Temperature, Daily consumption); 3 - Electrical energy flows (End consumption by type of customer, Physical flows of electrical energy, Physical exchanges with foreign countries); 4 - Trend of the electricity market (Cross-border contractual exchanges, Balance Responsible Entities, Sales of generation capacity auction, Energy sales on Powernext Day-Ahead TM , Balancing mechanism); 5 - Generation in France (Installed capacity and generation by type of facility, thermal, hydro, other renewable energy sources); 6 - Equipment on the electricity network (Equipment in operation as of 31 December); 7 - Power system operation (Equivalent time of interruption, Long outage frequency, Short outage frequency, Number of annual Significant System Events by severity); 8 - Access to the RTE network; 9 - Development over the past 15 years (Facilities in France at year-end, Annual results in France); 10 - International comparisons (Energy data of UCTE countries in 2006); 11 - Terminology

  16. The deregulation of Taiwan electricity supply industry

    International Nuclear Information System (INIS)

    Wang, K.M.

    2006-01-01

    Taiwan is on the brink of embarking on an ambitious reform in the electricity sector. The future electricity market of Taiwan will be operated under the framework set out in the Electricity Act Amendment. Independent system operator (ISO) will be the core body of the future market operations and its establishment will therefore be the key to the liberalization. This paper presents the proposed implementation plan based on diverse factors considered by the officials. A three steps phased introduction of Taiwan ISO is discussed. During the proposed Phase I interim market arrangements, Taipower's System Operation Department will assume the role of System Operator for the market. The dispatch rules are largely based on the existing Taipower internal procedure. As competition increases, the need for increased transparency will necessitate the establishment of a fully independent ISO in Phase II to provide the real time dispatch services. This will be completed within 2 years after the passage of the Electricity Act Amendment Bill. In the last phase of the deregulation process a multilateral market arrangement for managing energy imbalance and transmission constraints will result in better outcomes in relation to the policy objectives of security and economic efficiency. The 2-year timeframe stipulated in the Electricity Act Amendment Bill is a challenge for the Government and the industry. However, a smoothly functioning Taiwan ISO will bring benefits to the industry and the country in general

  17. Electricity privatisation and the Scottish coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Davies, P.

    1988-09-01

    In the run up to the privatisation of the electricity supply industry in Scotland, the South of Scotland Electricity Board (SSEB) is involved in a battle for power with British Coal's Scottish area over the price of its coal, the bulk of which has been purchased by the SSEB in recent years. The SSEB has been trying to persuade British Coal to bring its prices down to those currently available on the world market. This would require a reduction of some 30%. The SSEB has backed up its requests by threatening to import more foreign coal if British Coal refuses to comply.

  18. Renewable energies - Industrials, produce your own electricity

    International Nuclear Information System (INIS)

    Moragues, Manuel

    2016-01-01

    As a public bidding has been launched at the initiative of the French government on self-consumption in industrial and office building sites, this article discusses this issue of self-production and consumption, and its perspectives. Professionals and individuals could be interested in the recent evolutions as it was before more interesting to sell the produced photovoltaic electricity to EDF than to consume it. Some industries (warehouses, supermarkets, oil production, and airport) have already implemented this solution, and its development could boost the use of photovoltaic panels

  19. Distribution effects of electricity tax illustrated by different distribution concepts

    International Nuclear Information System (INIS)

    Halvorsen, Bente; Larsen, Bodil M.; Nesbakken, Runa

    2001-01-01

    This study demonstrates the significance of the choice of distribution concepts in analyses of distribution effects of electricity tax. By distribution effects are meant that life circumstances are changing. The focus is on different income concepts. Income is an important element in the life circumstances of the households. The distribution effects are studied by focusing on general income before and after tax, pension able earnings before and after tax and total consumption expenditure. The authors study how increased electricity expenses caused by a proportional increase of the electricity tax affect the households in various income groups. It is found that the burden of such an increased tax, measured by the budget part set aside for electricity, decreases with income no matter what distribution concept is used. By calculating measures of inequality for income minus electricity tax before and after the tax increase, it is found that the measures of inequality significantly depend on the choice of distribution concept

  20. Deregulation of Electricity Supply Industry in Oman

    Directory of Open Access Journals (Sweden)

    Hamed S. Al-Maghderi

    2002-06-01

    Full Text Available This paper examines the opportunities available and the conditions needed for the deregulation of the Electricity Supply Industry (ESI, with particular reference to the Sultanate of Oman. The paper highlights the general issues of regulation required to encourage competition in the ESI.  After that, the discussion focuses on regulation methods in the privatized ESI by describing the regulators control through price caps setting for regulatees, the conduct regulation process, the rate of return regulation setting, and the spot market (the pool contract. Finally, the prospects of restructuring and privatizing the ESI in the Sultanate of Oman are examined by reviewing the current structure of the industry and government objectives in deregulation of the electricity sector as well as the regulation framework.

  1. Restructuring in the electricity industry: [proceedings

    International Nuclear Information System (INIS)

    1995-01-01

    Restructuring is the pivotal concept in today's marketplace, implying new organizational structures for a more effective and efficient delivery of goods and services to an increasingly discriminating community of consumers. The conference was held in Toronto in February 1995, to examine the forces driving the change in organizational structures and methods for delivering services, and to examine the most effective ways to bring about change specifically in the electrical industry. Problems of definition, open access, the role of provincial governments, the perspectives of individual utilities, competitive electric power systems in the UK and elsewhere, impact of industry restructuring on municipal utilities, and implications for public policy were debated at length. Regulatory control, steps in implementing a new structure, and ways of balancing regulatory and commercial constraints were also discussed

  2. The Mexican electricity industry - cogeneration potential

    International Nuclear Information System (INIS)

    Monroy, I.L.

    2000-01-01

    A brief history of Mexico's electric power industry is given. Diagrams show (i) the increase in primary energy production from 1990-1998; (ii) energy consumption by sector and (iii) the change in capacity between 1990 and 1998. The projected energy development for 1998-2007 is discussed. The Mexican government has chosen cogeneration to be an important contributor to future energy-efficient power production. Data on installed cogeneration capacity for years 2000 and 2001 are given according to sector

  3. Industry agreement on efficient electrical motors

    International Nuclear Information System (INIS)

    Schnyder, G.

    2004-01-01

    This comprehensive final report presents the results of a project carried out on behalf of the Swiss Federal Office of Energy (SFOE) and the Swiss Automation Pool (SAP) concerning the efficiency of electrical drives. The main goal of the project was to conclude a target agreement between the federal government and the Swiss electric motors/drives industry. This involves the promotion of the highest, 'eff1' energy-efficiency category of the three categories defined by the European Committee of Manufacturers of Electrical Machines and Power Electronics (CEMP). The report presents the findings of the project and recommends the banning of the use of motors in the lowest, 'eff3' category. Comparisons are made between the CEMP standards and further standards and promotion programmes in the USA and in Great Britain. Associated measures to be taken to aid the promotion of the drive standard are discussed

  4. Electric restructuring and consumer choice: lessons from other network industries

    International Nuclear Information System (INIS)

    Crandall, R. W.

    1999-01-01

    The advantages of the U.S. model of private markets with limited regulation as the best alternative for delivering goods and services to consumers are discussed by citing examples from deregulated industries such as transportation, primary energy and financial markets. In all these cases deregulation has been extraordinarily successful. Experiences from these industries are examined in an effort to extract lessons that might be useful in predicting the likely evolution of competition in the electricity and telecommunications industries. A warning is sounded that deregulating these industries without opening access to the infrastructure (which is owned by carriers) could create major problems of natural-monopoly exploitation by the incumbents that would negate any productive and allocative efficiency gains conferred by deregulation. One obvious choice for liberalizing a network industry with natural-monopoly infrastructure is simply to separate the infrastructure from the delivery of the service as was done with railroads in the United Kingdom. A similar, but less far-reaching example might be the solution devised for natural gas pipelines in the U.S. where pipeline owners opened their infrastructure to competitors, albeit at regulated rates. In the electricity industry, separating power generation from transmission and distribution appears to be fairly simple, provided access to transmission and distribution network is granted. In the telecommunication industry where there is no generation, the natural monopoly may be in the local distribution of traffic to subscribers, hence separation of local distribution from national or regional distribution is the normal way to open up the market to new service providers. Experiences in the U. S., the U. K., Canada and New Zealand in electricity and telecommunications industry deregulation are examined and various pitfalls in current approaches are pointed out. It is the author's contention that announcing a date for the end

  5. Cost-benefit analysis of reforming Israel's electricity industry

    International Nuclear Information System (INIS)

    Tishler, A.; Newman, J.; Spekterman, I.; Woo, C.K.

    2006-01-01

    In June 2003, the Israeli government decided to reform the Israeli electricity industry, which is currently dominated by Israel electric corporation (IEC), a government-owned vertically integrated electric utility. The first step of the planned reform will be taken in 2006, when IEC will be functionally separated into generation, transmission, local distribution, and customer services. Immediately thereafter will be the second step, which by 2012 will result in the deregulation and privatization of the wholesale generation and customer services. Transmission and distribution (T and D) services will remain regulated but will be available to all T and D users under mandatory open access. This paper summarizes a cost-benefit analysis of the government's reform plan. Relative to a regulated regime, the government's plan, even if carried out flawlessly, may only yield a small net benefit. However, it entails a large increase in electricity producer profit and government tax receipt, at the expense of electricity consumers. A less-than-perfect transition to competition can easily wipe out the potential gain of the government plan. Market reform experience to date shows that electricity market reform can easily fail, and the factors for success do not exist in Israel. Since the outcome of a failing reform can be disastrous, it will be imprudent to implement the government's plan in 2006, when the current electricity law expires. Hence, we recommend performance-based regulation for the period of 2006-2010. Subject to an updated cost-benefit analysis, possible decentralization, privatization and competition may follow

  6. Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

  7. Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

  8. Review of events in the electricity distribution sector in 1992

    International Nuclear Information System (INIS)

    Gasley, Henry

    1993-01-01

    The Chief Executive of Southern Electric plc, one of the thirteen recently privatised Regional Electricity Companies, reviews the performance of the United Kingdom electricity distribution sector for 1992, and considers the effects of competition in the Electricity Supply Industry. Three areas of progress are discussed. These include benefits to shareholders (in terms of profits) and to customers, who enjoyed lower prices, better service and more choice. A review of transmission prices was undertaken by the Director General and led to regulations on the effective operation of the pool, improved service standards and power generation competition. Finally, the Coal Review had ramifications for the industry by broadening the debate on competitively priced energy generation and the electricity market since privatization. (UK)

  9. Industrial pollution in the region of Paripe-Salvador: effects on the distribution of electric power and possible damages to human health; Poluicao industrial na regiao de Paripe-Salvador: efeitos sob a distribuicao de energia eletrica e possiveis danos a saude humana

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Cleuber Sobreira da Silva; Bomfim, Mario Antonio Duarte; Pereira, Osvaldo Soliano [Universidade Salvador (UNIFACS), BA (Brazil). Curso de Mestrado em Regulacao da Industria de Energia], e-mail: cchaves@coelba.com.br, e-mail: osoliano@unifacs.br

    2008-07-01

    In the area of Paripe, in the suburb of Salvador, Bahia, the distribution of electric power of the Company of Electricity of the State of Bahia (COELBA) is facing serious problems with the industrial pollution. That pollution affects the whole distribution net, causing fortuitous lack of energy, in many cases even daily in their feeders. The problem happens due to the accumulation of material associated along the net and more precisely in the distribution insulators, generating a type of dirt, no removable for normal procedures, in the surface of that insulator and it will cause escape currents, causing the lack of energy of the whole distribution electric net. The subject presented in that paper refers to the project of Research and Development (P and D), about Atmospheric Pollution in Insulators of Distribution. The results of the research showed that the atmospheric pollution could cause problems to the population that lives close the polluted area. The purpose of that article is to present relevant data related to the distribution net of COELBA, where there are many lacks of energy and the possibility of do not respect the criterion of quality of the National Agency of Electric power (ANEEL), besides the damages caused the population. (author)

  10. Electricity transmission and distribution in Ontario : a look ahead

    International Nuclear Information System (INIS)

    2004-01-01

    This paper addressed changes and challenges that can guide the Ontario government in developing a policy framework for sustainable development in the electric power industry, particularly the power distribution and transmission sector. The government is taking action to adopt a balanced approach to energy policy that combines features of both regulated and competitive industries. It is taking a more responsible approach to electricity pricing that ends subsidies in order to reflect the true cost of electricity. The major issues facing the wires sector are: improving efficiencies by consolidating activities, streamlining operations and unbundling power transmission and distribution into separate entities; developing distributed generation; and, investing in new transmission to relieve congestion. It was noted that distributed generation will become more important as coal-fired generation facilities are replaced. Distributed generation offers many benefits for the wires sector, including delaying the need to upgrade the existing wires network, offering local solutions to transmission constraints, reducing system losses, improving load factor and improving the reliability of supply. An increase in distributed generation will likely mean that more of Ontario's electricity supply will come from small-scale renewable generation facilities. The government promotes private sector investment to assist in the rebuilding of the electricity sector

  11. Strategic prospects of the electric power industry of Russia

    Science.gov (United States)

    Makarov, A. A.; Veselov, F. V.; Makarova, A. S.; Novikova, T. V.; Pankrushina, T. G.

    2017-11-01

    The prospects for the development of the electric power industry of Russia adopted at a regular stage of working out the Energy Strategy and the General Plan of Distribution of the Electric Power Facilities are discussed. The monitoring of the progress in the implementation of the Energy Strategies for the periods until 2020 and 2030 adopted in 2003 and 2009 has, in general, validated the correctness of the estimated volumes of the energy resource production under overestimation of the expected domestic demand owing to an excessively optimistic forecast of the real development of the economy. The priority lines of the national energy policy in electric power and allied industries proposed in the Energy Strategy for the period until 2035 are considered. The tools for implementation of most of the proposals and the effectiveness of their implementation have yet to be defined more concretely. The development of the energy sector and the electric power industry under the conservative and optimistic scenarios of the development of the country's economy has been predicted using the SCANER modeling and information system, viz., the dynamics of the domestic consumption, export, and production of the primary energy and the electric power has been determined and the commissioning and structure of the required generating capacities and the consumption of the basic types of the energy resources by the electric power industry and the centralized heat supply systems has been optimized. Changes in the economic efficiency of the nuclear and thermal power plants under the expected improvements on their cost and performance characteristics and an increase in the domestic fuel prices are presented. The competitiveness of the wind and solar power production under Russian conditions has been evaluated considering the necessity of reservation and partial duplication of their capacities when operated in the power supply systems. When optimizing the electric power industry as a subsystem

  12. Distribution of electric potential in hydrocarbon flames

    Energy Technology Data Exchange (ETDEWEB)

    Fialkov, B.S.; Shcherbakov, N.D.; Plitsyn, V.T.

    1978-01-01

    A study was made of the distribution of electrical potential and temperatures in laminar methane and propane--butane flames when the excess air coefficient in the mixture is changed from 0 to 1.2. 7 references, 3 figures.

  13. Industrial electricity demand for Turkey: A structural time series analysis

    International Nuclear Information System (INIS)

    Dilaver, Zafer; Hunt, Lester C.

    2011-01-01

    This research investigates the relationship between Turkish industrial electricity consumption, industrial value added and electricity prices in order to forecast future Turkish industrial electricity demand. To achieve this, an industrial electricity demand function for Turkey is estimated by applying the structural time series technique to annual data over the period 1960 to 2008. In addition to identifying the size and significance of the price and industrial value added (output) elasticities, this technique also uncovers the electricity Underlying Energy Demand Trend (UEDT) for the Turkish industrial sector and is, as far as is known, the first attempt to do this. The results suggest that output and real electricity prices and a UEDT all have an important role to play in driving Turkish industrial electricity demand. Consequently, they should all be incorporated when modelling Turkish industrial electricity demand and the estimated UEDT should arguably be considered in future energy policy decisions concerning the Turkish electricity industry. The output and price elasticities are estimated to be 0.15 and - 0.16 respectively, with an increasing (but at a decreasing rate) UEDT and based on the estimated equation, and different forecast assumptions, it is predicted that Turkish industrial electricity demand will be somewhere between 97 and 148 TWh by 2020. -- Research Highlights: → Estimated output and price elasticities of 0.15 and -0.16 respectively. → Estimated upward sloping UEDT (i.e. energy using) but at a decreasing rate. → Predicted Turkish industrial electricity demand between 97 and 148 TWh in 2020.

  14. Productivity growth and deregulation of Japanese electricity distribution

    International Nuclear Information System (INIS)

    Goto, Mika; Sueyoshi, Toshiyuki

    2009-01-01

    Deregulation of Japanese electric power industry began in 1995. After the amendment of Electricity Utility Industry Law in 1995, competition was partially introduced in a generation sector and retail competition started from 2000. Eligibility to choose suppliers was gradually extended from larger to smaller customers. As of 2008, almost all customers except households can choose their electricity suppliers. Based upon both previous implementation result of competition policy and review on their achievement, Japanese government will begin new policy debate in 2013 to assess further retail competition which includes household customers. To prepare for policy suggestion on the future electric power industry, this study examines the cost structure of Japanese electricity distribution. For the purpose, we estimate a multi-product translog cost function of Japanese electricity distribution from 1983 to 2003. Using the estimated cost function, we calculate several economic measures such as productivity growth, technical change and economies of scale and scope. The empirical results of this study indicate the improvement in productivity growth after deregulation.

  15. What happened to efficiency in electricity industries after reforms?

    International Nuclear Information System (INIS)

    Erdogdu, Erkan

    2011-01-01

    The last two decades have witnessed widespread power market reforms in both developed and developing countries that have cost billions of dollars. Among the key aims (and assumptions) of these reforms, there has always been realization of improvements in power sector efficiency. This paper questions the validity of this hypothesis. Using panel data from 92 countries covering the period 1982-2008, empirical models are developed and analyzed. The research findings suggest that the impact of the reforms on electricity industry performance is statistically significant but also limited. The results imply that, after controlling for country-specific variables, application of liberal market models in electricity industries slightly increases efficiency in power sector. Besides, we detect a positive relationship between reform process and the percentage share of network (transmission and distribution) losses in total electricity supplied, meaning that as countries take more reform steps the network losses as a fraction of power generated tend to increase. Moreover, the study puts forward that income level and other country specific features are more important determinants of industry efficiency than the reform process. Overall, contrary to expectations of substantial increases in sector efficiency, the paper concludes that introducing a decentralized market model with competition in the electricity sector has a limited increasing effect on power industry performance. - Highlights: → The paper questions whether the reforms increase efficiency in the power sector. → Panel data from 92 countries covering the period 1982-2008 are employed. → Models are developed by fixed/random effect panel data estimation methods. → The paper concludes the reforms have a limited effect on the industry performance. → We also find that as countries take more reform steps the network losses increase.

  16. Distribution of particles in stochastic electric fields

    International Nuclear Information System (INIS)

    Rolland, Paul.

    1979-11-01

    The distribution of one particle as well as an ensemble of particles submitted to a stochastic electric field obeying different kinds of laws is studied. A particular attention is devoted to the deviation from the gaussian distribution and to the consequences of this effect on diffusion and heating [fr

  17. Deregulation of Electricity Market and Drivers of Demand for Electrical Energy in Industry

    Directory of Open Access Journals (Sweden)

    Bojnec Štefan

    2016-09-01

    Full Text Available This paper investigates deregulation of electricity market focusing on electricity prices and drivers of demand for electrical energy in industry in Slovenia. The patterns in evolution of real electricity price developments and the three main components of the electricity price are calculated: liberalized market share for purchased electricity price, regulated infrastructure share for use of electricity network grids and mandatory state charges in the sale of electricity (duty, excise duty and value-added tax. To calculate the real value of electricity prices, producer price index of industrial commodities for electricity prices in industry is used as deflator and implicit deflator of gross domestic product for the size of the economy. In the empirical econometric part is used regression analysis for the amount electricity consumption in the industry depending on the real gross domestic product, direct and cross-price elasticity for natural gas prices in the industry. The results confirmed volatility in real electricity price developments with their increasing tendency and the increasing share of different taxes and state charges in the electricity prices for industry. Demand for electrical energy in industry is positively associated with gross domestic product and price of natural gas as substitute for electrical energy in industry use, and negatively associated with prices of electrical energy for industry.

  18. Distributed Coordination of Household Electricity Consumption

    DEFF Research Database (Denmark)

    Juelsgaard, Morten; Teixeira, Andre; Johansson, Mikael

    2014-01-01

    This work presents a distributed framework for coordination of flexible electricity consumption for a number of households in the distribution grid. We conduct coordination with the purpose of minimizing a trade-off between individual concerns about discomfort and electricity cost, on the one hand......, and joint concerns about grid losses and voltage variations on the other. Our contribution is mainly to illustrate how to conduct distributed coordination when consumers are jointly coupled by grid losses and voltage variations. In addition we illustrate the benefit of including consumption management...... in the grid operation, and how different types of consumption may present various benefits....

  19. Centralised and distributed electricity systems

    International Nuclear Information System (INIS)

    Bouffard, Francois; Kirschen, Daniel S.

    2008-01-01

    Because of their high level of integration, centralised energy supply systems are vulnerable to disturbances in the supply chain. In the case of electricity especially, this supply paradigm is losing some of its appeal. Apart from vulnerability, a number of further aggravating factors are reducing its attractiveness. They include the depletion of fossil fuels and their climate change impact, the insecurities affecting energy transportation infrastructure, and the desire of investors to minimise risks through the deployment of smaller-scale, modular generation and transmission systems. Small-scale decentralised systems, where energy production and consumption are usually tightly coupled, are emerging as a viable alternative. They are less dependent upon centralised energy supply, and can sometimes use more than one energy source. They are less sensitive to the uncertain availability of remote primary energy and transportation networks. In addition, the close connection between energy generation and use makes decentralised systems cleaner because they are most often based on renewable energies or on high-efficiency fossil fuel-based technologies such as combined heat and power (CHP). Fully decentralised energy supply is not currently possible or even truly desirable. The secure and clean energy systems of the future will be those flexible enough to allow for a spectrum of hybrid modes of operation and investment, combining the best attributes of both paradigms. A large part of this flexibility will come from the networks that make it possible to combine these two types of infrastructures and obtain the benefits of both approaches

  20. Regulatory reform in the Spanish electricity industry: a missed opportunity for competition

    International Nuclear Information System (INIS)

    Arocena, P.; Kuhn, Kai-Uwe; Regibeau, P.

    1998-01-01

    This paper examines the reform of the Spanish electricity industry, and argues that the reform is a lost opportunity for the rapid introduction of competition. The evolution of the Spanish electrical power industry is traced, and the basic characteristics of the Spanish electricity market, the regulatory regime before liberalisation, and the liberalisation process and its shortcomings are discussed. Some policy suggestions are raised including the facilitating of competitive entry in generation, the liberalisation of supply activities, the regulation of distribution, and increasing the power, independence and transparency of the regulator. The capacity, generation, and distribution shares of Spanish electric companies as of 1996 are tabulated. (UK)

  1. Electric distribution systems and embedded generation capacity

    International Nuclear Information System (INIS)

    Calderaro, V.; Galdi, V.; Piccolo, A.; Siano, P.

    2006-01-01

    The main policy issues of European States are sustainable energy supply promotion and liberalization of energy markets, which introduced market competition in electricity production and created support mechanisms to encourage renewable electricity production and consumption. As a result of liberalization, any generator, including small-scale and renewable energy based units, can sell electricity on the free market. In order to meet future sustainability targets, connection of a higher number of Distributed Generation (DG) units to the electrical power system is expected, requiring changes in the design and operation of distribution electricity systems, as well as changes in electricity network regulation. In order to assist distribution system operators in planning and managing DG connections and in maximizing DG penetration and renewable sources exploitation, this paper proposed a reconfiguration methodology based on a Genetic Algorithm (GA), that was tested on a 70-bus system with DG units. The simulation results confirmed that the methodology represents a suitable tool for distribution system operators when dealing with DG capacity expansion and power loss issues, providing information regarding the potential penetration network-wide and allowing maximum exploitation of renewable generation. 35 refs., 4 tabs., 6 figs

  2. Challenges of electric power industry restructuring for fuel suppliers

    International Nuclear Information System (INIS)

    1998-09-01

    The purpose of this report is to provide an assessment of the changes in other energy industries that could occur as the result of restructuring in the electric power industry. This report is prepared for a wide audience, including Congress, Federal and State agencies, the electric power industry, and the general public. 28 figs., 25 tabs

  3. Challenges of electric power industry restructuring for fuel suppliers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    The purpose of this report is to provide an assessment of the changes in other energy industries that could occur as the result of restructuring in the electric power industry. This report is prepared for a wide audience, including Congress, Federal and State agencies, the electric power industry, and the general public. 28 figs., 25 tabs.

  4. Electric drive motors for industrial robots

    Science.gov (United States)

    Fichtner, K.

    1985-04-01

    In robotized industrial plants it is possible to use electric motors in the technological process and also for control, assembly, transport, testing, and measurements. Particularly suitable for these applications are permanent-magnet d.c. motors. A new special series was developed for industrial robots with hinge joints in kinematic pairs. The complete drive includes thyristors or transistor controls with regulators and, if necessary, a line transformer as well as a servomotor with tachometer and odometer for speed, current, and position control. The drive is coupled to a robot tong through mechanical torque and force converters. In addition to a 0 to 4000 rpm speed regulation, without wobble at low speeds, and a high torque-to-weight ratio for repetitive short-time heavy duty, these low-inertia motors develop high starting and accelerating torques over the entire speed range. They operate from a 1 to O 220 V a.c. line through a rectifier. The motors are totally enclosed, or of open construction for better ventilation. Their windings have class F insulation for operation at ambient temperatures up to 40 C.

  5. Electric Power Consumption Coefficients for U.S. Industries: Regional Estimation and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Boero, Riccardo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-21

    Economic activity relies on electric power provided by electrical generation, transmission, and distribution systems. This paper presents a method developed at Los Alamos National Laboratory to estimate electric power consumption by different industries in the United States. Results are validated through comparisons with existing literature and benchmarking data sources. We also discuss the limitations and applications of the presented method, such as estimating indirect electric power consumption and assessing the economic impact of power outages based on input-output economic models.

  6. United States electric industry : restructuring in review

    International Nuclear Information System (INIS)

    Slocum Hollis, S.

    2004-01-01

    This paper provides a detailed review of the United States electric power industry. The aim of the review was to clarify and better define current industry procedures and practices in light of significant and recent restructuring. In addition, recent bankruptcies and the power blackout in 2003 have raised concerns over industry practices. Issues concerning Independent System Operators (ISO) and regional transmission organizations were evaluated, with reference to an evolution and implementation of Regional Transmission Organization (RTO) policy, including a cost-benefit analysis. A background of RTO formations was provided with reference to consolidation, selection process and transfer of assets. Standard market design, network access and pricing issues were reviewed, as well as market and reliability concerns. Issues concerning affiliate treatment, shortages and the effect of sale of securities were presented. Various approaches to congestion management were examined, with examples from California and New England. Market monitoring issues, investigations and hearings were also examined, with examples and orders, including details of refunds. Measures to improve reliability were reviewed, including: management systems, benefit margins, requirements, assurance agreements and reserve markets. Issues concerning information access were presented, including: Open Access Same-time Information System (OASIS) requirements; tagging; standard business practices and protocols; and quarterly report practices and protocols. Interconnection policies were reviewed with reference to applicability, service options and pricing. The issue of variations was examined, with case examples concerning cost allocation, contract rights and treatment of specific costs. Jurisdiction issues concerning corporate realignments and power exchanges were presented, as well as specific services and state-federal relations. Issues concerning mergers and merger policy were also discussed, with reference

  7. Distributed control in the electricity infrastructure

    International Nuclear Information System (INIS)

    Kok, J.K.; Warmer, C.; Kamphuis, I.G.; Mellstrand, P.; Gustavsson, R.

    2006-01-01

    Different driving forces push the electricity production towards decentralization. As a result, the current electricity infrastructure is expected to evolve into a network of networks, in which all system parts communicate with each other and influence each other. Multiagent systems and electronic markets form an appropriate technology needed for control and coordination tasks in the future electricity network. We present the PowerMatcher, a market-based control concept for supply demand matching (SDM) in electricity networks. In a simulation study we show the ability of this approach to raise the simultaneousness of electricity production and consumption within (local) control clusters. This control concept can be applied in different business cases like reduction of imbalance costs in commercial portfolios or virtual power plant operation of distributed generators. Two PowerMatcher-based field test configurations are described, one currently in operation, one currently under construction

  8. Industrial plant electrical systems: Simplicity, reliability, cost savings, redundancies

    International Nuclear Information System (INIS)

    Silvestri, A.; Tommazzolli, F.; Pavia Univ.

    1992-01-01

    This article represents a compact but complete design and construction manual for industrial plant electrical systems. It is to be used by design engineers having prior knowledge of local power supply routes and voltages and regards principally the optimum choice of internal distribution systems which can be radial or single, double ringed or with various network configurations, and with single or multiple supplies, and many or few redundancies. After giving guidelines on the choosing of these options, the manual deals with problematics relevant to suitable cable sizing. A cost benefit benefit analysis method is suggested for the choice of the number of redundancies. Recommendations are given for the choice of transformers, motorized equipment, switch boards and circuit breakers. Reference is made to Italian electrical safety and building codes

  9. Electricity Self-Generation Costs for Industrial Companies in Cameroon

    Directory of Open Access Journals (Sweden)

    Diboma Benjamin Salomon

    2010-07-01

    Full Text Available Industrial production in developing countries (DC is frequently perturbed by electric energy supply difficulties. To overcome this problem, generators are used in self-generation of energy, but this leads to an increase of electricity-related expenses. This article assesses the impact of electricity self-generation on Cameroonian industrial companies. The model described in this article is based on data collected through a survey of a representative sample of industrial companies and from numerous previous thematic and statistical studies. The results of our analyses show that expenses related to electricity in industrial companies in Cameroon have increased five times due to electricity rationing and untimely power cuts. The article also suggests some solutions to improve the electricity self-generation capacity of industrial companies.

  10. Restructuring, ownership and efficiency in the electricity industry

    Science.gov (United States)

    Shanefelter, Jennifer Kaiser

    The first chapter considers improvements in productive efficiency that can result from a movement from a regulated framework to one that allows for market-based incentives for industry participants. Specifically, I look at the case of restructuring in the electricity generation industry. Using data from the electricity industry, this analysis considers the total effect of restructuring on one input to the production process, labor, as reflected in employment levels, payroll per employee and aggregate establishment payroll. Using concurrent payroll and employment data from non-utility ("merchant") and utility generators in both restructured and nonrestructured states, I estimate the effect of market liberalization, comprising both new entry and state-level legislation, on employment and payroll in this industry. I find that merchant owners of divested generation assets employ significantly fewer people, but that the payroll per employee is not significantly different from what workers at utility-owned plants are paid. As a result, the new merchant owners of these plants have significantly lower aggregate payroll expenses. Decomposing the effect into a merchant effect and a divestiture effect, I find that merchant ownership is the primary driver of these results. As documented in Chapter 1, merchant power plants have lower overall payroll costs than plants owned by utilities. Employment at merchant power plants is characterized by reduced staffing levels but higher average payroll per employee. A hypothesis set forth in that paper is that merchant generators employ fewer workers at the lower end of the wage distribution, resulting in a higher average payroll per employee. The second chapter of this paper examines whether employment at nonutility power plants, that is, those that are either divested or native merchant power plants, is skewed towards more skilled labor. This chapter also considers the extent to which the difference in employment levels is the result of

  11. Performance parameters of electric power distribution

    International Nuclear Information System (INIS)

    Schilling, M.Th.; Lima, J.W.M.

    1992-01-01

    The aspects referring to the evaluation of distribution system reliability are presented: consumers, companies and regulator institutes. The different strategies for fixing of probabilistic criterions of performance are mentioned, including the economic valorization of continuity restriction of electric supply. (C.G.C.)

  12. States of Cybersecurity: Electricity Distribution System Discussions

    Energy Technology Data Exchange (ETDEWEB)

    Pena, Ivonne [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ingram, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Martin, Maurice [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-03-16

    State and local entities that oversee the reliable, affordable provision of electricity are faced with growing and evolving threats from cybersecurity risks to our nation's electricity distribution system. All-hazards system resilience is a shared responsibility among electric utilities and their regulators or policy-setting boards of directors. Cybersecurity presents new challenges and should be a focus for states, local governments, and Native American tribes that are developing energy-assurance plans to protect critical infrastructure. This research sought to investigate the implementation of governance and policy at the distribution utility level that facilitates cybersecurity preparedness to inform the U.S. Department of Energy (DOE), Office of Energy Policy and Systems Analysis; states; local governments; and other stakeholders on the challenges, gaps, and opportunities that may exist for future analysis. The need is urgent to identify the challenges and inconsistencies in how cybersecurity practices are being applied across the United States to inform the development of best practices, mitigations, and future research and development investments in securing the electricity infrastructure. By examining the current practices and applications of cybersecurity preparedness, this report seeks to identify the challenges and persistent gaps between policy and execution and reflect the underlying motivations of distinct utility structures as they play out at the local level. This study aims to create an initial baseline of cybersecurity preparedness within the distribution electricity sector. The focus of this study is on distribution utilities not bound by the cybersecurity guidelines of the North American Electric Reliability Corporation (NERC) to examine the range of mechanisms taken by state regulators, city councils that own municipal utilities, and boards of directors of rural cooperatives.

  13. Reforming European electricity industries: to each, his own ''single market''

    International Nuclear Information System (INIS)

    Glachant, J.M.

    2000-01-01

    National transpositions of the European directive on domestic electricity markets have maintained a degree of diversity; and this also characterizes the other conditions for accessing national electricity markets (physical, commercial, industrial and capital access). As a look at the prices of electricity shows, these national markets do not operate in a single way Europe-wide. Furthermore, electricity companies - key actors in this competition - differ widely from each other in size, electrical potential, investment portfolios and strategies for growth. (authors)

  14. Future electrical distribution grids: Smart Grids

    International Nuclear Information System (INIS)

    Hadjsaid, N.; Sabonnadiere, J.C.; Angelier, J.P.

    2010-01-01

    The new energy paradigm faced by distribution network represents a real scientific challenge. Thus, national and EU objectives in terms of environment and energy efficiency with resulted regulatory incentives for renewable energies, the deployment of smart meters and the need to respond to changing needs including new uses related to electric and plug-in hybrid vehicles introduce more complexity and favour the evolution towards a smarter grid. The economic interest group in Grenoble IDEA in connection with the power laboratory G2ELab at Grenoble Institute of technology, EDF and Schneider Electric are conducting research on the electrical distribution of the future in presence of distributed generation for ten years.Thus, several innovations emerged in terms of flexibility and intelligence of the distribution network. One can notice the intelligence solutions for voltage control, the tools of network optimization, the self-healing techniques, the innovative strategies for connecting distributed and intermittent generation or load control possibilities for the distributor. All these innovations are firmly in the context of intelligent networks of tomorrow 'Smart Grids'. (authors)

  15. American Indian tribes and electric industry restructuring: Issues and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Howarth, D. [Morse, Richard, and Weisenmiller, and Associates Inc., Oakland, CA (United States); Busch, J. [Lawrence Berkeley National Lab., CA (United States); Starrs, T. [Kelso, Starrs, and Associates LLC, Vashon, WA (United States)

    1997-07-01

    The US electric utility industry is undergoing a period of fundamental change that has significant implications for Native American tribes. Although many details remain to be determined, the future electric power industry will be very different from that of the present. It is anticipated that the new competitive electric industry will be more efficient, which some believe will benefit all participants by lowering electricity costs. Recent developments in the industry, however, indicate that the restructuring process will likely benefit some parties at the expense of others. Given the historical experience and current situation of Native American tribes in the US, there is good reason to pay attention to electric industry changes to ensure that the situation of tribes is improved and not worsened as a result of electric restructuring. This paper provides a review of electricity restructuring in the US and identifies ways in which tribes may be affected and how tribes may seek to protect and serve their interests. Chapter 2 describes the current status of energy production and service on reservations. Chapter 3 provides an overview of the evolution of the electric industry to its present form and introduces the regulatory and structural changes presently taking place. Chapter 4 provides a more detailed discussion of changes in the US electric industry with a specific focus on the implications of these changes for tribes. Chapter 5 presents a summary of the conclusions reached in this paper.

  16. State Electricity Regulatory Policy and Distributed Resources: Distributed Resources and Electric System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Cowart, R.; Harrington, C.; Moskovitz, D.; Shirley, W.; Weston, F.; Sedano, R.

    2002-10-01

    Designing and implementing credit-based pilot programs for distributed resources distribution is a low-cost, low-risk opportunity to find out how these resources can help defer or avoid costly electric power system (utility grid) distribution upgrades. This report describes implementation options for deaveraged distribution credits and distributed resource development zones. Developing workable programs implementing these policies can dramatically increase the deployment of distributed resources in ways that benefit distributed resource vendors, users, and distribution utilities. This report is one in the State Electricity Regulatory Policy and Distributed Resources series developed under contract to NREL (see Annual Technical Status Report of the Regulatory Assistance Project: September 2000-September 2001, NREL/SR-560-32733). Other titles in this series are: (1) Accommodating Distributed Resources in Wholesale Markets, NREL/SR-560-32497; (2) Distributed Resources and Electric System Re liability, NREL/SR-560-32498; (3) Distribution System Cost Methodologies for Distributed Generation, NREL/SR-560-32500; (4) Distribution System Cost Methodologies for Distributed Generation Appendices, NREL/SR-560-32501.

  17. Decomposition of electricity demand in China's industrial sector

    International Nuclear Information System (INIS)

    Steenhof, Paul A.

    2006-01-01

    In the past five years, China's demand for electricity has accelerated far beyond what central planners had forecasted, leading to supply constraints and costly brownouts throughout the country. This paper presents analysis of the effect of changes in the industrial sector on electricity demand, an important economic sector contributing to these above patterns as it consumes nearly 70% of the electricity generated in China. Using decomposition analysis, it is found that both increased industrial activity and fuel shifts helped increase industrial sector electricity demand between 1998 and 2002, the period of focus in this study, but significant increases in energy efficiency countered this

  18. Electricity consumption, industrial production, and entrepreneurship in Singapore

    International Nuclear Information System (INIS)

    Sun, Sizhong; Anwar, Sajid

    2015-01-01

    Within the context of a tri-variate vector autoregressive framework that includes entrepreneurship, this paper examines the link between electricity consumption and industrial production in Singapore's manufacturing sector. Unlike the existing studies, this paper focuses on one sector of the economy and utilises a unique monthly dataset. Empirical analysis based on Johansen's cointegration approach shows that the three variables are cointegrated – i.e., a stable long-run relationship exists among electricity consumption, output and entrepreneurship in Singapore's manufacturing sector. Empirical analysis based on data from January 1983 to February 2014 reveals that electricity consumption adjusts very slowly to shocks to industrial production and entrepreneurship. Furthermore, entrepreneurship Granger causes electricity consumption, which causes industrial production. As electricity consumption causes industrial output, the growth hypothesis concerning energy consumption and economic growth holds in Singapore's manufacturing sector and policies that restrict electricity production, without electricity imports, are likely to lead to a decline in the manufacturing output. - Highlights: • Using a unique monthly dataset, we focus on Singapore's manufacturing sector. • Electricity consumption, output and entrepreneurship are cointegrated. • Electricity consumption adjusts very slowly to shocks to the other variables. • Entrepreneurship causes electricity consumption which causes industrial production. • We find that growth hypothesis governs the electricity consumption and real output

  19. Private wind powered electricity generators for industry in the UK

    Science.gov (United States)

    Thabit, S. S.; Stark, J.

    This paper investigates the impact of the provisions of the new Energy Act, 1983 on industrial wind-powered private generators of electricity and the effects of published tariffs on various industrial working patterns. Up to 30 percent savings can be achieved in annual electricity bill costs for an industrial generator/user of electricity working a single daily shift, if located in a favorable, 7 m/s mean annual wind speed regime. Variation of the availability charge between Electricity Boards about a base value of 0.70 pounds sterling/kVA was found to have insignificant (+ or - 1.3 percent) impact on total electricity bill costs. It was also shown that for industrial users of electricity, the simpler two-rate purchase terms were commercially adequate when compared with the four-rate alternative where expensive metering becomes necessary.

  20. Research and development in the electricity supply industry conference

    International Nuclear Information System (INIS)

    1995-01-01

    This document summarizes the views expressed in the conference papers. These are grouped into fuels for the future, coal fired powers stations, renewables, use of heat as a by-product of electricity generation, fuel cells, electric vehicles, and environmental issues in the electricity supply industry. The points and ideas from the two workshops held in conjunction with the conference are also summarized

  1. Electrical distribution grids: from legacy to innovation

    International Nuclear Information System (INIS)

    Hadjsaid, N.; Sabonnadiere, J.C.; Angelier, J.P.

    2010-01-01

    The electrical distribution networks in general and distributed generation in particular are undergoing tremendous technological, economic and conceptual changes. Indeed, with the establishment of Distribution System Operators (DSOs), the environmental concerns of our modern societies, the needs of security and quality of supply and the emergence of new services related to the 'active energy customer' character have particularly highlighted the potential for innovation and development of distribution networks. Distribution networks are of particular importance because of their close link with the end user, their interface with distributed generation and their ability to facilitate and integrate new applications and services such as plug-in electric and hybrid vehicles or smart meters. On the other hand, they represent a large infrastructure that has become complex to manage with the emergence of this new energy paradigm. However, this strategic legacy is aging and the quality of supply, after years of improvement, begins to deteriorate again. It is therefore essential to increase investment in these assets at all levels whether in innovation, expansion or renovation to prepare the smarter grid of the future. (authors)

  2. Electrical power distribution control methods, electrical energy demand monitoring methods, and power management devices

    Science.gov (United States)

    Chassin, David P [Pasco, WA; Donnelly, Matthew K [Kennewick, WA; Dagle, Jeffery E [Richland, WA

    2011-12-06

    Electrical power distribution control methods, electrical energy demand monitoring methods, and power management devices are described. In one aspect, an electrical power distribution control method includes providing electrical energy from an electrical power distribution system, applying the electrical energy to a load, providing a plurality of different values for a threshold at a plurality of moments in time and corresponding to an electrical characteristic of the electrical energy, and adjusting an amount of the electrical energy applied to the load responsive to an electrical characteristic of the electrical energy triggering one of the values of the threshold at the respective moment in time.

  3. Data Distribution Service for Industrial Automation

    OpenAIRE

    Yang, Jinsong

    2012-01-01

    In industrial automation systems, there is usually large volume of data which needs to be delivered to right places at the right time. In addition, large number of nodes in the automation systems are usually distributed which increases the complexity that there needs to be more point-to-point Ethernet-connections in the network. Hence, it is necessary to apply data-centric design and reduce the connection complexity. Data Distributed Service for Real-Time Systems (DDS) is a data-centric middl...

  4. Electrical industry and the eighties - triumph or disaster

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-16

    A brief review of progress made in the electrical industry during the 1880s is presented. Then the trials and tribulations which are in store for the industry in 1980 are reviewed. How these problems should be tackled by a strong and unified industry is suggested. Areas covered include the anti-nuclear movement, the energy supply problems, rampant consumerism, and the consumer lobby.

  5. Electricity, Gas and Water Supply. Industry Training Monograph No. 4.

    Science.gov (United States)

    Dumbrell, Tom

    Australia's electricity, gas, and water supply industry employs only 0.8% of the nation's workers and employment in the industry has declined by nearly 39% in the last decade. This industry is substantially more dependent on the vocational education and training (VET) sector for skilled graduates than is the total Australian labor market. Despite…

  6. Increased Observability in Electric Distribution Grids

    DEFF Research Database (Denmark)

    Prostejovsky, Alexander Maria

    infrastructure in distribution grids. Strong emphasis is placed on experimental verifications of the investigated concepts wherever applicable. Electric grids are changing, and so are the roles of system operators. The interest in sustainable energy and the rapidly increasing number of Distributed Energy...... that DSO areas are not necessarily self-sufficient. Missing power is covered by neighbouring areas to confine problems in a small region, which is demonstrated in SYSLAB on a two-area, grid-connected setup. The results highlight the advantages of harnessing the information obtained directly from...

  7. Public-policy responsibilities in a restructured electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, B.; Hirst, E.; Bauer, D.

    1995-06-01

    In this report, we identify and define the key public-policy values, objectives, and actions that the US electricity industry currently meets. We also discuss the opportunities for meeting these objectives in a restructured industry that relies primarily on market forces rather than on government mandates. And we discuss those functions that governments might undertake, presumably because they will not be fully met by a restructured industry on its own. These discussions are based on a variety of inputs. The most important inputs came from participants in an April 1995 workshop on Public-Policy Responsibilities and Electric Industry Restructuring: Shaping the Research Agenda. Other sources of information and insights include the reviews of a draft of this report by workshop participants and others and the rapidly growing literature on electric-industry restructuring and its implications. One of the major concerns about the future of the electricity industry is the fate of numerous social and environmental programs supported by today`s electric utilities. Many people worry that a market-driven industry may not meet the public-policy objectives that electric utilities have met in the past. Examples of potentially at-risk programs include demand-side management (DSM), renewable energy, low-income weatherization, and fuel diversity. Workshop participants represented electric utilities, public utility commissions (PUCs), state energy offices, public-interest groups, other energy providers, and the research community.

  8. Industrial companies' demand for electricity. Evidence from a micropanel

    International Nuclear Information System (INIS)

    Bjoerner, T.B.; Togeby, M.; Jensen, H.H.

    2001-01-01

    The paper presents a micro-econometric analysis of industrial companies' demand for electricity. Previous studies on electricity consumption in the industrial sector have relied on aggregate data or cross-section observations. Here we present an econometric study on electricity demand based on a panel of 2949 Danish companies followed from 1983 to 1996. It is found that estimators of electricity demand that take account of the panel structure (fixed effect models) yield considerably lower price and production elasticities compared to estimators that do not (like cross-section models). It is also investigated how various company characteristics like size, type of industrial sub-sector and electricity intensity in production influence price and production elasticities. It appears that companies with a high electricity intensity also have a high own-price elasticity

  9. Guide to Alberta's competitive electricity industry

    International Nuclear Information System (INIS)

    2002-03-01

    A crucial point was reached at the beginning of 2001 in the process of competitive electricity market in Alberta, when record high prices were reached in both the natural gas and electricity markets. In this document, the intent was to present, in a non-technical way, the new electricity market. It was designed to cover issues as they flow, from generator to consumer. Therefore, it began with a market model illustration going through each step of the process. Frequently asked questions, developed using the input from 160,000 Albertans, were answered in each section. The first section of the document dealt with a competitive market. In section 2, the electricity supply was discussed, followed by section 3 and the wholesale electricity market. In section, 4, the reader was invited to explore customer choice, and consumer information was provided in section 5. tabs., figs

  10. Powering the future: Blueprint for a sustainable electricity industry

    International Nuclear Information System (INIS)

    Flavin, C.; Lenssen, N.

    1997-01-01

    Long known for its vast scale and fierce resistance to change, the US power industry is poised for a sweeping transformation. Although driven by many of the same forces propelling the telecommunications revolution, the electricity industry has received only a fraction as much attention. Yet the electric industry is far larger, with a current investment per customer of $6,000--double that of the phone and cable industries combined. Moreover, unlike telecommunications, the future of the power industry will have an enormous impact on the global environment. The glimmerings of a more efficient, decentralized, and less-polluting power system are beginning to capture the interest--and even the investment dollars--of some. In this paper, the authors describe the route to a more environmentally sustainable electric industry to power the twenty-first century

  11. The complexity of electricity markets: the limits of the liberalisation of electric industries

    International Nuclear Information System (INIS)

    Finon, Dominique

    2015-12-01

    As electric industries have been liberalised or privatised later than other public utilities, notably in developed countries, this article first recalls that this activity has been during a long time a monopoly hold by a public service, and precisely planned with tariffs regulated by public authorities. Then, the author explains how deregulation is performed for such an industry to allow competition to be introduced at all levels of the electric sector. He describes the operation mode of the wholesale market which is structured in an hourly market due to the non-storable characteristic of electricity, describes retail price formation by pilling up the wholesale price, regulated tariffs of transport and distribution, and a tax aimed at paying the cost of public policies. This price can be compared with the regulated tariff which previously encompassed everything without any dissociation. Finally, he highlights the main defects and drawbacks of this market which do not allow long term investments in base equipment, back up equipment and on low carbon equipment (renewable, nuclear, and others)

  12. The Importance of Management in the Deregulated Retail Electricity Distribution Market in Slovenia

    OpenAIRE

    Drago Papler; Stefan Bojnec

    2006-01-01

    This paper underlines the importance of management in the deregulated retail electricity distribution market, entrepreneurship and business behaviours toward consumers’ satisfaction with quality of services. The coefficients of concentration indicate a high concentration of electricity suppliers and users in the deregulated electricity retail market for industry. The production function reveals the importance of education and electricity infrastructure, and to a lesser extent of capital inten...

  13. Essays in energy economics: The electricity industry

    Science.gov (United States)

    Martinez-Chombo, Eduardo

    Electricity demand analysis using cointegration and error-correction models with time varying parameters: The Mexican case. In this essay we show how some flexibility can be allowed in modeling the parameters of the electricity demand function by employing the time varying coefficient (TVC) cointegrating model developed by Park and Hahn (1999). With the income elasticity of electricity demand modeled as a TVC, we perform tests to examine the adequacy of the proposed model against the cointegrating regression with fixed coefficients, as well as against the spuriousness of the regression with TVC. The results reject the specification of the model with fixed coefficients and favor the proposed model. We also show how some flexibility is gained in the specification of the error correction model based on the proposed TVC cointegrating model, by including more lags of the error correction term as predetermined variables. Finally, we present the results of some out-of-sample forecast comparison among competing models. Electricity demand and supply in Mexico. In this essay we present a simplified model of the Mexican electricity transmission network. We use the model to approximate the marginal cost of supplying electricity to consumers in different locations and at different times of the year. We examine how costs and system operations will be affected by proposed investments in generation and transmission capacity given a forecast of growth in regional electricity demands. Decomposing electricity prices with jumps. In this essay we propose a model that decomposes electricity prices into two independent stochastic processes: one that represents the "normal" pattern of electricity prices and the other that captures temporary shocks, or "jumps", with non-lasting effects in the market. Each contains specific mean reverting parameters to estimate. In order to identify such components we specify a state-space model with regime switching. Using Kim's (1994) filtering algorithm

  14. An imbalanced development of coal and electricity industries in China

    International Nuclear Information System (INIS)

    Wang, Bing

    2007-01-01

    China's coal and electricity industries have a strong reliance on each other, however, because of excessive invasion of government, it is difficult for these two industries to form a stable, reasonable, and transaction cost-saving relationships, but long-run disputes and quarrels. This paper discusses the pricing policies and transaction relationship between these two industries from the historical perspective. It begins with the discussion of coal. Coal market has become competitive since 1980 due to the system of dual track approach, but coal sold to electricity was still tightly controlled by government-guided pricing. Then the paper examines electricity investment and tariff reform. Unlike coal, entry to electricity generation sector was gradually relaxed but generation and retailing tariffs are still strictly regulated. As energy demand and prices soared after 2002, coal and electricity enterprises are all unsatisfied with the rule of price setting of coal sold to electricity industry. This paper concludes that the deliberate low coal price policy does protect electricity industry from fuel cost fluctuation but harm coal industry. Allocative and productive efficiency are difficult to achieve in the long run

  15. An imbalanced development of coal and electricity industries in China

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Bing [School of Public Administration, Huazhong University of Science and Technology, Wuhan (China)]. E-mail: wbyf@mail.hust.edu.cn

    2007-10-15

    China's coal and electricity industries have a strong reliance on each other, however, because of excessive invasion of government, it is difficult for these two industries to form a stable, reasonable, and transaction cost-saving relationships, but long-run disputes and quarrels. This paper discusses the pricing policies and transaction relationship between these two industries from the historical perspective. It begins with the discussion of coal. Coal market has become competitive since 1980 due to the system of dual track approach, but coal sold to electricity was still tightly controlled by government-guided pricing. Then the paper examines electricity investment and tariff reform. Unlike coal, entry to electricity generation sector was gradually relaxed but generation and retailing tariffs are still strictly regulated. As energy demand and prices soared after 2002, coal and electricity enterprises are all unsatisfied with the rule of price setting of coal sold to electricity industry. This paper concludes that the deliberate low coal price policy does protect electricity industry from fuel cost fluctuation but harm coal industry. Allocative and productive efficiency are difficult to achieve in the long run.

  16. An imbalanced development of coal and electricity industries in China

    Energy Technology Data Exchange (ETDEWEB)

    Bing Wang [Huazhong University of Science and Technology, Wuhan (China). School of Public Administration

    2007-10-15

    China's coal and electricity industries have a strong reliance on each other, however, because of excessive invasion of government, it is difficult for these two industries to form a stable, reasonable, and transaction cost-saving relationships, but long-run disputes and quarrels. This paper discusses the pricing policies and transaction relationship between these two industries from the historical perspective. It begins with the discussion of coal. The coal market has become competitive since 1980 due to the system of dual track approach, but coal sold to electricity was still tightly controlled by government-guided pricing. The paper next examines electricity investment and tariff reform. Unlike coal, entry to the electricity generation sector was gradually relaxed but generation and retailing tariffs are still strictly regulated. As energy demand and prices soared after 2002, coal and electricity enterprises are all unsatisfied with the rule of price setting of coal sold to the electricity industry. It is concluded that the deliberate low coal price policy does protect the electricity industry from fuel cost fluctuation but harms the coal industry. Allocative and productive efficiency are difficult to achieve in the long run. 33 refs., 5 figs., 2 tabs.

  17. Guide to the economic regulation of the electricity industry

    International Nuclear Information System (INIS)

    1999-06-01

    Guide to the Economic Regulation of the Electricity Industry, part of the series of OXERA Guides to Regulation, is designed as an essential work of reference for those who work in regulation and for practitioners who need to understand the needs and mechanics of regulation. The 154-page document provides: comprehensive coverage of the institutional and legal framework which defines the regulation of the electricity industry; an examination of current regulatory issues and developments in the industry; explanations of the roles of the key players; a condensed account of all the relevant legal documents; coverage of the industry in Scotland and Northern Ireland. (Author)

  18. The distribution of fatal risk in Ontario industries

    International Nuclear Information System (INIS)

    Davis, C.K.; Forbes, W.F.; Hayward, L.M.

    1986-09-01

    The purpose of this study was to estimate non-radiological risks of occupational fatalities in Ontario industries. The distribution of high-risk occupations was found to vary widely between the different industries for a number of reasons including the fact that insufficient data in some instances resulted in less than desirable reliability. However, in spite of various data limitations, a number of occupations had above average fatal risk rates in several industries, including Material Handlers and Related, N.E.C. (SOC-9319), Welders and Flame Cutters (SOC-8335), Truck Drivers (SOC-9175) and Mechanics and Repairmen, except Electrical (SOC-8589). The majority of occupations had rates below or close to the industry average; however, between 15% and 30% of the occupations in any given industry had fatal risk rates above the industry average. When the number of workers involved in different occupations was considered, between 18% and 40% of workers were in occupations with above average risk. Recommendations for future work are also provided

  19. Planning games for the electricity supply industry

    International Nuclear Information System (INIS)

    Weber, K.

    1977-01-01

    The author shows the main differences between the electricity supply planning game for the Bernische Kraftwerke AG (PEW-1) and that for the Rheinisch-Westfaelische Elektrizitaetswerke AG (PEW-2). (orig.) [de

  20. Project Management Software for Distributed Industrial Companies

    Science.gov (United States)

    Dobrojević, M.; Medjo, B.; Rakin, M.; Sedmak, A.

    This paper gives an overview of the development of a new software solution for project management, intended mainly to use in industrial environment. The main concern of the proposed solution is application in everyday engineering practice in various, mainly distributed industrial companies. Having this in mind, special care has been devoted to development of appropriate tools for tracking, storing and analysis of the information about the project, and in-time delivering to the right team members or other responsible persons. The proposed solution is Internet-based and uses LAMP/WAMP (Linux or Windows - Apache - MySQL - PHP) platform, because of its stability, versatility, open source technology and simple maintenance. Modular structure of the software makes it easy for customization according to client specific needs, with a very short implementation period. Its main advantages are simple usage, quick implementation, easy system maintenance, short training and only basic computer skills needed for operators.

  1. Electricity utility deregulation in Great Britain: economic and industrial consequences

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    In this paper we analyze in the first part how was made the deregulation of the public electric utilities in Great Britain and in the second the logic and the contradictions of this deregulation in an industrial point of view

  2. Bulgarian electricity market and the large-scale industrial customers

    International Nuclear Information System (INIS)

    Popov, P.; Kanev, K.; Dyankov, M.; Minkov, N.

    2003-01-01

    The paper focuses on a brief overview of the Bulgarian Electricity Market Design and steps toward its development, as well as on preliminary analyses for market opening and influence of large industrial customers to system and market operation. (author)

  3. State aid in the Austrian electricity industry law

    International Nuclear Information System (INIS)

    Rehulka, J.

    2009-01-01

    The present work deals with the existence of State aid in the Austrian electricity industry and focuses on three selected areas of the Austrian legal system, which are examined for their compatibility with Community law. Subject of the first part of this work is a representation of the article 87 ff Treaty of Rome and its impact on Austrian provisions on the promotion of electricity from renewable energies or on the promotion of cogeneration energy. In this context, the first principles of the European state aid law and in particular the European Court are presented regarding the existence of State aid. Here, the Rsp of the Court in connection with the use of State resources in the Rs PreussenElektra Stardust Marine and Pearle is paid in connection with para-fiscal levies special attention. The evaluation of the Austrian support model is based on PreussenElektra, Stardust Marine and Pearle. Then the system of green electricity production in Austria represented. In addition to the Community law principles (green power directive, frameworks and guidelines for environmental aid) is here in particular the 'Oekostromgesetz' and treated it's novellas. It is an intensive discussion with the Commission's decisions on the compatibility of the green power and CHP funding and the funding of the countries with state aid rules. As part of this analysis is to attempt a classification of the Commission's practice in the Community legal system. The second part of the work deals with the determination of absorbed. System utilization rates and their distribution to the network operator. After a presentation of the Community legislation (EC regulations, the internal electricity market directives) and Rsp of the European Court of Justice (Case ADBHu, Ferring, Altmark Trans) to services of general economic interest is first attempted to determine the presence of these services in the 216 Austrian legislation. Here, the question will be, entrusted with services of general economic

  4. 29 CFR 1915.181 - Electrical circuits and distribution boards.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Electrical circuits and distribution boards. 1915.181... Electrical Machinery § 1915.181 Electrical circuits and distribution boards. (a) The provisions of this... employee is permitted to work on an electrical circuit, except when the circuit must remain energized for...

  5. Managing an evolution: Deregulation of the electric utility industry

    Energy Technology Data Exchange (ETDEWEB)

    Skinner, S.K.

    1994-12-31

    The author discusses the emerging competitive situation in the electric power industry as deregulation of electric utilities looms on the horizon. The paper supports this change, and the competition it will bring, but urges caution as changes are instituted, and the regulatory bodies decide how and how much to free, and at what rates. The reason for his urge for caution comes from historical experience of other industries, which were smaller and had less direct impact on every American.

  6. The changing structure of the electric power industry: An update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The U. S. electric power industry today is on the road to restructuring a road heretofore uncharted. While parallels can be drawn from similar journeys taken by the airline industry, the telecommunications industry, and, most recently, the natural gas industry, the electric power industry has its own unique set of critical issues that must be resolved along the way. The transition will be from a structure based on a vertically integrated and regulated monopoly to one equipped to function successfully in a competitive market. The long-standing traditional structure of the electric power industry is the result of a complex web of events that have been unfolding for over 100 years. Some of these events had far-reaching and widely publicized effects. Other major events took the form of legislation. Still other events had effects that are less obvious in comparison (e.g., the appearance of technologies such as transformers and steam and gas turbines, the invention of home appliances, the man-made fission of uranium), and it is likely that their significance in the history of the industry has been obscured by the passage of time. Nevertheless, they, too, hold a place in the underpinnings of today`s electric industry structure. The purpose of this report, which is intended for both lay and technical readers, is twofold. First, it is a basic reference document that provides a comprehensive delineation of the electric power industry and its traditional structure, which has been based upon its monopoly status. Second, it describes the industry`s transition to a competitive environment by providing a descriptive analysis of the factors that have contributed to the interest in a competitive market, proposed legislative and regulatory actions, and the steps being taken by the various components of the industry to meet the challenges of adapting to and prevailing in a competitive environment.

  7. Productivity in Swedish electricity retail distribution

    International Nuclear Information System (INIS)

    Hjalmarsson, L.; Veiderpass, A.

    1992-01-01

    This paper examines productivity growth in electricity retail distribution in Sweden in a multiple output-multiple input framework. The approach used is nonparametric Data Envelopment Analysis (DEA). Productivity is measured by means of the Malmquist index. Productivity comparisons are made between different types of ownership and between different service areas. The study indicates a high rate of productivity growth, due to economics of density, when measured over a period of 17 years. The results show no significant differences in productivity growth between different types of ownership or economic organization. (20 refs., 1 fig., 4 tabs.)

  8. The effect of electricity prices on industry in Germany

    International Nuclear Information System (INIS)

    Roepenack, A. von

    1992-01-01

    The contribution gives a survey of the general consumption of electricity in the (former) Federal Republic of Germany from 1980 until 1990 and illustrates the effect of electricity prices on industry - safety of the site, competition, influences on prices for electricity, intensity of electricity, comparison to gross increase in value. In addition, the influence of politics on electricity prices is examined. Among other things, we owe the success of our industry on the international market to the increase in our use of electric power. This is the basis of our success in rationalization and our status on the world market. The dependency of industry and industrial products on this form of energy has increased and will continue to do so. Thus the politicians have little room to act if they do not want to influence industry in a negative way. On the basis of the situation described here, electricity prices which are competitive internationally are an essential prerequisite for the future of our economy. (orig./HSCH) [de

  9. Addressing the human resource challenge in the electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-02-15

    The electricity industry is facing significant challenges in terms of its labour forces in the years ahead due to an aging workforce and pending retirements in an industry already challenged by increasing demand, technological change and regulatory instability. A shortage of skilled labour could compromise the electricity sector in a variety of ways including: reduced reliability, increased cost of production, infrastructure projects delays, and decreased safety and productivity due to less experienced employees and worker shortages. This report presented a briefing of recommendations developed by the Canadian Electricity Association (CEA) that offered concrete solutions to addressing the electricity industry's workforce challenges. The recommendations focused around three areas: building Canadian skills base by investing in education, skills training and apprenticeships, particularly in underrepresented communities; ensuring trained, skilled workers are able to work and flourish in their area of expertise by streamlining certification and credential recognition, and facilitating workforce mobility; and attracting and retaining skilled foreign workers by ensuring successful community and workplace integration. Background information on the electricity industry in Canada was also presented. The CEA also proposed a list of policy initiatives to ensure the Canadian electricity industry can maintain and enhance its human and electricity potential. It was concluded that the CEA is prepared to develop detailed implementation plans and programs to operationalize any and all of the recommendations in the briefing. 2 figs.

  10. Waste utilization in electric energy industry

    International Nuclear Information System (INIS)

    Parate, N.S.; Harris, E.

    1991-01-01

    This paper reports that electric energy is an integral element of today's economy and the standard quality of life. The availability of energy at an affordable cost has always been of basic concern because of the intimate relationship of energy to our societal development and progress. Coal and Uranium are the primary alternative energy sources for large electric power plants. Coal remains the dominant fuel for electric generation. The pressurized fluidized bed combustion technology has the potential of utilizing all types of coal, including coal with high ash, high sulphur, and high moisture content. Fluidized bed combustion is a firing technique which fulfills today's pollution control requirements without downstream flue gas cleaning plants like scrubbers, baghouses, and precipitators

  11. Identifying options for regulating the coordination of network investments with investments in distributed electricity generation

    International Nuclear Information System (INIS)

    Nisten, E.

    2010-02-01

    The increase in the distributed generation of electricity, with wind turbines and solar panels, necessitates investments in the distribution network. The current tariff regulation in the Dutch electricity industry, with its ex post evaluation of the efficiency of investments and the frontier shift in the x-factor, delays these investments. In the unbundled electricity industry, the investments in the network need to be coordinated with those in the distributed generation of electricity to enable the DSOs to build enough network capacity. The current Dutch regulations do not provide for a sufficient information exchange between the generators and the system operators to coordinate the investments. This paper analyses these two effects of the Dutch regulation, and suggests improvements to the regulation of the network connection and transportation tariffs to allow for sufficient network capacity and coordination between the investments in the network and in the generation of electricity. These improvements include locally differentiated tariffs that increase with an increasing concentration of distributed generators.

  12. Moves towards privatization and market liberalization in Ukraine's electricity industry

    International Nuclear Information System (INIS)

    Ham, A.

    1997-01-01

    The problems surrounding Ukraine's electricity industry and the safety of its nuclear reactors have attracted much international concern. This paper describes the political and economic developments in the country since it became independent in 1991, and highlights the electricity sector reforms which have been aided by the EBRD, the IMPF and the World Bank. (author)

  13. Harmonic Analysis of Electric Vehicle Loadings on Distribution System

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Yijun A [University of Southern California, Department of Electrical Engineering; Xu, Yunshan [University of Southern California, Department of Electrical Engineering; Chen, Zimin [University of Southern California, Department of Electrical Engineering; Peng, Fei [University of Southern California, Department of Electrical Engineering; Beshir, Mohammed [University of Southern California, Department of Electrical Engineering

    2014-12-01

    With the increasing number of Electric Vehicles (EV) in this age, the power system is facing huge challenges of the high penetration rates of EVs charging stations. Therefore, a technical study of the impact of EVs charging on the distribution system is required. This paper is applied with PSCAD software and aimed to analyzing the Total Harmonic Distortion (THD) brought by Electric Vehicles charging stations in power systems. The paper starts with choosing IEEE34 node test feeder as the distribution system, building electric vehicle level two charging battery model and other four different testing scenarios: overhead transmission line and underground cable, industrial area, transformer and photovoltaic (PV) system. Then the statistic method is used to analyze different characteristics of THD in the plug-in transient, plug-out transient and steady-state charging conditions associated with these four scenarios are taken into the analysis. Finally, the factors influencing the THD in different scenarios are found. The analyzing results lead the conclusion of this paper to have constructive suggestions for both Electric Vehicle charging station construction and customers' charging habits.

  14. The changing structure of the electric power industry: An update

    International Nuclear Information System (INIS)

    1996-12-01

    The U. S. electric power industry today is on the road to restructuring a road heretofore uncharted. While parallels can be drawn from similar journeys taken by the airline industry, the telecommunications industry, and, most recently, the natural gas industry, the electric power industry has its own unique set of critical issues that must be resolved along the way. The transition will be from a structure based on a vertically integrated and regulated monopoly to one equipped to function successfully in a competitive market. The long-standing traditional structure of the electric power industry is the result of a complex web of events that have been unfolding for over 100 years. Some of these events had far-reaching and widely publicized effects. Other major events took the form of legislation. Still other events had effects that are less obvious in comparison (e.g., the appearance of technologies such as transformers and steam and gas turbines, the invention of home appliances, the man-made fission of uranium), and it is likely that their significance in the history of the industry has been obscured by the passage of time. Nevertheless, they, too, hold a place in the underpinnings of today's electric industry structure. The purpose of this report, which is intended for both lay and technical readers, is twofold. First, it is a basic reference document that provides a comprehensive delineation of the electric power industry and its traditional structure, which has been based upon its monopoly status. Second, it describes the industry's transition to a competitive environment by providing a descriptive analysis of the factors that have contributed to the interest in a competitive market, proposed legislative and regulatory actions, and the steps being taken by the various components of the industry to meet the challenges of adapting to and prevailing in a competitive environment

  15. Externalities associated with distributed generation of electric energy from biomass in the sugar cane industry; Externalidades associadas a geracao distribuida de energia eletrica a partir de biomassa na industria sucroalcooleira

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Jose Roberto; Coelho, Suani Teixeira; Almeida, Marcelo Costa; Pecora, Vanessa; Prado, Thiago Guilherme Ferreira [Centro Nacional de Referencia em Biomassa (CENBIO), Sao Paulo, SP (Brazil)

    2004-07-01

    The externalities related with projects of power generation, the cogeneration in the sugarcane industry including, traditionally are not present in the economic and technical evaluations that support decision making. Such fact implies in a distortion in the evaluation between traditional technologies and the ones based on renewable sources. The Brazilian sugarcane industry presents increasing potential for the participation in the segment of power generation. This study presents partial results from a work group project concerned on research of the externalities associated to the cogeneration using bagasse from sugar cane processing. Externalities are identified from the distributed generation consequences. The possibility of minimizing negative externalities from the sugarcane industry, caused by the production of sugar and alcohol, with positive externalities from the social benefits of distributed generation is the most important conclusion reached as so far. (author)

  16. Models and strategies for electricity distribution companies in emerging economies

    Science.gov (United States)

    Zaragocin Espinosa, Leonardo Vicente

    Unbundling and privatization have become key elements of restructuring in the Electric Power Industry of Emerging Economies. These processes have concentrated on the Generation and Transmission areas, leaving Distribution as lower priority. Based on a comparison between the old role of Distribution Companies (DISCOS) and its new potential role this study identifies the main issues and challenges that DISCOS will face in the new environment once structural and ownership changes are completed. For the specific case of DISCOS in Emerging Economies, regulatory policies are reviewed and strategies identified in order to facilitate the transition and to assist in the integration of DISCOS with other agents in the evolving electric power market. Of particular importance in this research is the analysis of the role of Energy Efficiency (EE) in the new structural and governance environment. A theoretical study of the effects of energy efficiency measures, specifically loss reduction, on price regulation is developed within a proposed regulatory regime of privatization together with Price-Cap Regulation. This theoretical benchmark is then used as a starting point for a case study, the Electric System of Ecuador, where an analysis of the current Ecuadorian price regulation scheme (the Distribution Value Added Charge, VAD, scheme) is presented and analyzed in detail. General recommendations for improving the application of the VAD pricing approach are advanced, with special reference to the current situation in Ecuador.

  17. Industrial Demand Management Providing Ancillary Services to the Distribution Grid

    DEFF Research Database (Denmark)

    Rahnama, Samira; Green, Torben; Lyhne, Casper

    2017-01-01

    A prominent feature of the future smart grid is the active participation of the consumer side in ancillary service provision. Grid operators procure ancillary services, including regulating power, voltage control, frequency control, and so on, to ensure safe, reliable, and high-quality electricity...... delivery. Consumers' involvement requires new entities and infrastructure. A so-called aggregator has been introduced as a new player to manage the services that are offered by the consumption units. This paper describes an industrial scale experimental setup for evaluating a particular type of aggregator....... The aggregator aims to provide a distribution grid service from industrial thermal loads through a direct control policy. Our specific case studies are a supermarket refrigeration system and an HVac chiller in conjunction with an ice storage, which are virtually connected to the aggregator. Practical results...

  18. Topical problems of the German electric power industry

    Energy Technology Data Exchange (ETDEWEB)

    Boeck, H [Stadtwerke Hannover A.G. (Germany, F.R.); Worm, N [Hannover-Braunschweigische Stromversorgungs-A.G., Hannover (Germany, F.R.); Brohmeyer, M [Schleswig-Holsteinische Stromversorgungs A.G., Rendsburg (Germany, F.R.). Abt. Anwendungstechnik und Beratung; Deuster, G [Energieversorgung Oberhausen A.G. (Germany, F.R.); Heitzer, H; Holzer, J [Bayernwerk A.G., Muenchen (Germany, F.R.); Deparade, K [Verband der Energie-Abnehmer e.V., Hannover (Germany, F.R.); Marnet, C [Stadtwerke Duesseldorf A.G. (Germany, F.R.); Oberlack, H W [Hamburgische Electricitaets-Werke A.G. (Germany, F.R.); Segatz, U [Preussische Elektrizitaets-A.G. (Preussenelektra), Hannover (Germany, F.R.)

    1978-06-01

    On the occasion of the general meeting of the VDE high-ranking personalities of the German Power Supply Industry were interviewed on current affairs. The following subjects were discussed: (1) problems involved in energy policy; (2) energy problems due to newly formed regions; (3) utilization of electric power in agriculture; (4) development prospects of district heating; (5) problems of power generation far from coal districts; (6) rationalization in the commercial sector; (7) opportunities and limits of industrial combined heat and power generation; (8) environmental protection and electric power supply; (9) possible utilization of imported coal; and (10). assuring the primary energy basis for electric power supply.

  19. Expert System Applications for the Electric Power Industry: Proceedings

    International Nuclear Information System (INIS)

    1992-06-01

    A conference on Expert System Applications for the Electric Power Industry was held in Boston on September 8--11, 1991 to provide a forum for technology transfer, technical information exchange, and education. The conference was attended by more than 150 representatives of electric utilities, equipment manufacturers, engineering consulting organizations, universities, national laboratories, and government agencies. The meeting included a keynote address, 70 papers, and 18 expert system demonstrations. Sessions covered expert systems in power system planning operations, fossil power plant applications, nuclear power plant applications, and intelligent user interfaces. The presentations showed how expert systems can provide immediate benefits to the electric power industry in many applications. Individual papers are indexed separately

  20. The US Electricity Industry and the Low-Carbon Transition

    International Nuclear Information System (INIS)

    Mathieu, Carole

    2016-04-01

    While the wave of liberalisation produced a fragmented, but now stabilised, industrial landscape, the US power sector is about to undergo another major transformation with the low-carbon transition. Against a background of combined weak demand for electricity, a boom in distributed solar PV power and a decline in the profitability of merchant assets, incumbent stakeholders are currently dealing with further questions about the future of their business models. Driven as much by market forces as by government support mechanisms, these destabilising factors have an impact, which is still difficult to assess, but the need to control future transformation is already at the heart of debate. In areas where output is priced on the wholesale markets, new tools are being studied to secure compensation for some power stations, with the issue of possible excessive dependency on natural gas in the background. At the same time, an increasing number of states are questioning the design of their support mechanisms for distributed energy. If net metering, the main support mechanism for distributed solar PV power, has been a resounding success because of its simplicity, it is now criticised because of the problems of covering grid costs and the cross-subsidies it leads to. Although reforms are always difficult to implement, since they involve a conflict of increasingly organised interests, consensus is beginning to emerge regarding the structure of retail sales tariffs. Nevertheless, calls for an assessment of distributed generation according to its actual value for the system are increasing, without any real convergence of views on the methodology to be adopted to date. Conventional stakeholders are also looking to adapt in order to find growth opportunities where primarily only challenges appear. The diversification of activities is an important lever for transformation, even if the case of NRG Energy illustrates the difficulty in making strategic shifts while maintaining

  1. The electricity industry and 'Energy 2000'

    International Nuclear Information System (INIS)

    Niederberger, A.

    1991-01-01

    The action programme 'Energy 2000', presented by Federal Councillor Ogi as a result of the agreements of last September, aims, on the one hand, for a stabilization of power consumption until the turn of the century, and, on the other hand, for an extension of domestic production, to which a contribution should also be made by renewable energy sources, particularly photovoltaic power. The Swiss electricity producers are prepared to make their contribution to the realization of these ambitious objectives. (orig.) [de

  2. Ice storm '98: The electricity industry's great challenge

    International Nuclear Information System (INIS)

    Anon.

    1998-01-01

    The biggest and most costly natural disaster to hit Canada in over a century, the ice storms of 1998, that transformed Eastern Canada into a virtual glacier, was discussed. Trees, wires, poles, transmission towers, transformers succumbed to the immense weight of the ice, countless transmission and distribution lines were destroyed, leaving millions in the dark and cold, many for several weeks. The unprecedented show of solidarity within the electricity industry, as hundreds of crews from utilities across Canada and the U.S., the many thousands of private individuals and some 16,000 members of the Canadian Forces that came to the assistance of those in the affected areas, working 16-hour days, braving falling trees and sub-zero temperatures, was truly astonishing, and clearly the stuff of which legends are made. The storm has humbled Canadian public authorities and especially the Canadian electricity industry. Besides honoring those that weathered the storm, and paying tribute to the utilities and private companies that reached out to assist in the relief efforts, this review also discusses the need for government agencies and utility companies to review their emergency preparedness plans. The objective is to improve them by incorporating the most important lessons learned from this experience, in an effort to forestall their future recurrence. It is generally accepted that the Ice Storm of '98 was a unique natural disaster that no amount of planning could have foreseen, much less prevented. Nevertheless, by examining the lessons learned, it might be possible to reduce the severity should a similar disaster occur again

  3. Future view of electric power supply techniques. Distribution techniques

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Toshio

    1988-06-20

    Present situations surrounding the power distribution are described, and the problems and future trend of the power distribution are reviewed. It is described for the situations that the gravity of a power demand is transfering from industrial use to home use and the dependence on electrical energy is increasing. It is pointed out for the features that the distribution system exists on not only supply side but also customer side, the system is complicated and two-dimentional, and there is a tremendous amount of facility. High voltage, high frequency and automatic distribution, and the distributed power sources such as fuel cells are described in terms of the problems to ensure the power supply. The protection and decreasing of service interruptions, the protection of harmonic wave, and long-life equipments are described in terms of the problems to ensure the power quality. As for the problems to ensure a comfortable life and space, the communication system using the distribution system for a customer service or automatic operation in a house, and the enviromental harmony by a small facility or underground distribution are described. (1 tab)

  4. Shock to the system: Restructuring America's electricity industry

    International Nuclear Information System (INIS)

    Brennan, T.J.; Palmer, K.L.; Kopp, R.J.; Krupnick, A.J.; Stagliano, V.

    1996-01-01

    Recent decades have seen revolutions in communications, finance, and transportation. In a similar way, technological, economic, and political developments are reshaping the US electricity industry. This concise, balanced, and readable primer, produced by a team of economic analysts at Resources for the Future, introduces the concepts, crucial elements, and terminology used in discussions about electricity restructuring. A Shock to the System provides the background necessary to understand the increasing role of competition in electricity markets. The authors present the history of public policy regarding electricity, identify the significant proposals for implementing competition, and examine their potential consequences for utility regulation, industry structure, cost recovery, and the environment. This volume is an instructive guide to the decisions that electricity providers, customers, and policy makers will face, what forms the decisions are likely to take, and what the long-term ramifications may be

  5. An industrial customer's view of changes in electricity purchasing

    International Nuclear Information System (INIS)

    Muiznieks, R.

    1995-01-01

    The purchasing agent for Canadian Occidental Chemicals described his experiences in the purchase of electricity under the new circumstances of competition. Electrical power costs for Canadian Occidental's manufacturing operation were described as a key consideration in expanding their chlorate production. The ideal purchasing scheme was described from the purchaser's standpoint. A list of what purchasers wish to gain from increased supplier choices was provided. The behaviour of the electricity suppliers that provide power to CanadianOccidental was described since changes in British Columbia's electric power regulations were enacted. Electric utility marketing practices in Ontario, Manitoba and Alberta were noted in comparison. It was prophesized that deeregulation will ultimately benefit consumers and provincial economies, by transforming the power industry into a customer driven industry

  6. A literature survey on asset management in electrical power [transmission and distribution] system

    OpenAIRE

    Khuntia, S.R.; Rueda Torres, José L.; Bouwman, S.; van der Meijden, M.A.M.M.

    2016-01-01

    Asset management is one of the key components in a transforming electric power industry. Electric power industry is undergoing significant changes because of technical, socio-economical and environmental developments. Also, because of restructuring and deregulation, the focus has been on transmission and distribution assets that include transmission lines, power transformers, protection devices, substation equipment and support structures. This study aims to provide a detailed exposure to ass...

  7. Structure of the German electricity industry

    International Nuclear Information System (INIS)

    1992-01-01

    The German integrated association is a union of those electric power supply utilities in the Federal Republic of Germany which cooperate in the integrated operation of 220 kV and 380 kV. The German integrated association (DVG) was founded in 1948. Its main task is to create the technical, operational and legal conditions for the cooperation in the national and international integrated system. The inclusion of the new Federal States has been practiced for the first time with the 320 MW power station in Offleben. (DG) [de

  8. Electricity prices in a competitive market: a preliminary analysis of the deregulated Thai electricity industry

    International Nuclear Information System (INIS)

    Pipattanasomporn, M.; Ongsakul, W.; Pacudan, R.; Lefevre, T.

    2000-01-01

    The electricity industry throughout the world is currently undergoing a significant transition towards restructuring and deregulation. Following this new legislation, Thailand has initiated an institutional and structural reform with a belief that this could be the best way forward for the Thai electricity supply industry (ESI) to improve efficiency, lower electricity prices, and tackle financial debts. This paper presents an analysis of the extent to which prices for generation services in a competitive market may differ from regulated electricity prices, if competitive prices are based on marginal costs and regulated prices are based on average costs, by using Thailand as a case study. (Author)

  9. Power quality in electric distribution systems

    International Nuclear Information System (INIS)

    Mohamed, A.A.S.

    2005-01-01

    the power quality of the electric system is defined by the constant values of the voltage and frequency, the good value of the power factor close to unity, and balanced three phase voltages and currents. capacitors are widely installed in distribution systems for reactive power compensation to achieve power and energy loss reduction, voltage regulation and system capacity release. the extent of these benefits depends greatly on low the capacitors are placed on the system . the problem of how to place capacitors on the system such that these benefits are achieved and / or maximized against the cost associated with the capacitor placement is termed the general capacitor placement problem.the presented mathematical model has been developed to determine the size, number, and location of fixed capacitor banks that will maximize the saving derived from reduction in peak power and energy loss, and that will minimize the capital and installation costs of capacitors

  10. RISKS OF LOSING CONTROLLABILITY WHILE LIBERALIZING THE ELECTRIC POWER INDUSTRY

    Directory of Open Access Journals (Sweden)

    Yu. S. Petrusha

    2015-01-01

    Full Text Available The paper analyses controllability qua a reliability characteristic of the electric-power grid controlling system. The following notions are used: the object (environment susceptibility towards the control stimuli, the controlling system adequacy, environment of the secure functioning. The author points to the necessity of accounting for the limitations of technological and organizational character. While liberalizing the electric-power industry, the backbone control-principle “the industry functioning reliability” is being replaced with the principle of “profit-making” that requires complete restatement of the control philosophy.The conflict between commercial benefit gaining and the reliability assurance expenses leads to losing controllability in all the managerial links and to probable catastrophic consequences. The recapitulation of the Russian Federation power industry privatization substantiates concerns of the liberal ideas poor survivability in the ex-Soviet territories. The results of degradation of the secure-functioning environment demonstrate affinity of the mechanisms that triggered the Chernobyl NPP, Fukusima NPP, and Sayan-Shushenskya HPP disasters. Securing reliability of the strategic objects leaves the competence boundaries of the electricpower industry.The topical issue of Belorussian electric-power industry functioning and developing is the combination of technical re-equipment (developing the operational dispatch management and the control-system organizational modernizing in general with gradual and controllable transition to the market mechanisms of functioning. Herewith, preserving the state monopoly on regime provision for the operation of the electric-power system should not leave out the industry appeal for outside investment and is regulated by the optimal degree and intensity of the state participation in governing the electric-power supply industry. The distinction of privatization models and the stages

  11. Super-sensing technology: industrial applications and future challenges of electrical tomography.

    Science.gov (United States)

    Wei, Kent Hsin-Yu; Qiu, Chang-Hua; Primrose, Ken

    2016-06-28

    Electrical tomography is a relatively new imaging technique that can image the distribution of the passive electrical properties of an object. Since electrical tomography technology was proposed in the 1980s, the technique has evolved rapidly because of its low cost, easy scale-up and non-invasive features. The technique itself can be sensitive to all passive electrical properties, such as conductivity, permittivity and permeability. Hence, it has a huge potential to be applied in many applications. Owing to its ill-posed nature and low image resolution, electrical tomography attracts more attention in industrial fields than biomedical fields. In the past decades, there have been many research developments and industrial implementations of electrical tomography; nevertheless, the awareness of this technology in industrial sectors is still one of the biggest limitations for technology implementation. In this paper, the authors have summarized several representative applications that use electrical tomography. Some of the current tomography research activities will also be discussed. This article is part of the themed issue 'Supersensing through industrial process tomography'. © 2016 The Author(s).

  12. Electricity pricing: optimal operation and investment by industrial consumers

    Energy Technology Data Exchange (ETDEWEB)

    Outhred, H.R.; Kaye, R.J.; Sutanto, D.; Manimaran, R.; Bannister, C.H.; Lee, Y.B.

    1988-08-01

    Ongoing research in the areas of economically efficient electricity pricing and industrial consumer response is described. A new electricity pricing theory is described that incorporates future uncertainty and intertemporal linkages between decisions. It indicates that electricity prices should contain two terms - short-run marginal cost plus a term that reflects how each particular decision is likely to affect future global welfare. A practical implementation using spot prices and forward contracts plus financial instruments for risk sharing and decision coordination is explored, and a procedure for developing long-term pricing policy is considered. The operation of industrial plant has been investigated and models developed to optimize plant behaviour in response to spot prices and forward contracts for electricity. These models are described and results of simulation studies discussed. The economic efficiency and risk sharing advantages of this advanced tariff structure compared with a conventional time-of-use tariff are illustrated.

  13. Transmission pricing and stranded costs in the electric power industry

    International Nuclear Information System (INIS)

    Baumol, W.J.; Sidak, J.G.

    1995-09-01

    Stranded costs are those costs that electric utilities are currently permitted to recover through their rates but whose recovery may be impeded or prevented by the advent of competition in the industry. Estimates of these costs run from the tens to the hundreds of billions of dollars. Should regulators permit utilities to recover stranded costs while they take steps to promote competition in the electric power industry. William Baumol and J. Gregory Sidak argue that answer to that question should be yes.The authors show that a transmission price, the price for sending electricity over the transmission grid, can be determined in a manner that is compatible with economic efficiency and clearly neutral in its effects upon all competitors in electricity generation. A correctly constructed regime of transmission pricing may in fact achieve the efficiency and equity goals that justify the recovery of stranded costs

  14. Interim supply in the electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    Strassburg, W

    1977-06-01

    The interim supply or the so-called 'condition without a contract' can occur within the framework of energy supply in the relationship between 1) public utility and tariff customer, 2) public utility and the special last-in-line consumer, 3) supplying and distributing public utility, 4) public utility and territorial administrative body. The present contribution deals with the cases named under (3) and (4). Cases (1) and (2) were dealt with in a previous article. Relevant contract clauses and laws and their effects on contracting partners are discussed.

  15. Interim supply in the electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    Strassburg, W

    1977-05-01

    The interim supply or the so-called 'condition without a contract' can occur within the framework of energy supply in the relationship between: 1) public utility and tariff customer, 2) public utility and the special last-in-line consumer, 3) supplying and distributing public utility, 4) public utility and territorial administrative body. The contribution at hand deals with the cases under 1) and 2); cases 3) and 4) are dealt with in an article to be published. Relevant contract clauses and laws and their effects on contracting partners are discussed. 41 references.

  16. Forces that direct the competition in the electric power industry in the new institutional scenery

    International Nuclear Information System (INIS)

    Ribeiro Filho, Ary Pinto; Moraes, Walter Fernando Araujo de

    1999-01-01

    This work identifies the probable strategic characteristics of the interconnected North-Northeast Brazilian electricity industry, after the current restructuring and privatization process has been implemented. It is a 15.0 thousand MW generation industry supplying more than 33.5 million consumers. The normative scenery for analysis of the electricity industry takes into consideration the premises that the government establishes the vertical separation of generation, transmission, distribution and retailing, and introduces the regulation to a competitive industrial structure in generation and retailing. It is assumed that free access to transmit and distribute electricity and broad choices for consumers are the main features for competition in both generation and retailing. The essence of formulating strategy is to relate a company with its environment, considering the industrial structure. Porter's five forces model for industry environment and competition, emphasizing the role of the government in such regulated industry, is the basic theoretical reference. The main strategic characteristics related to entry barriers, rivalry intensity, supplier power, customer power and substitute products are analyzed. (author)

  17. Basic strategies in the electric power industry in the new competitive environment

    International Nuclear Information System (INIS)

    Ribeiro Filho, Ary Pinto; Moraes, Walter Fernando Araujo de

    1999-01-01

    This work identifies the probable strategic characteristics of the interconnected North-Northeast Brazilian electricity industry, after the current restructuring and privatization process has been implemented. It is a 15.0 thousand MW generation industry supplying more than 33.5 million consumers. The normative scenery for analysis of the electricity industry takes into consideration the premises that the government establishes the vertical separation of generation, transmission, distribution and retailing, and introduces the regulation to a competitive industrial structure in generation and retailing. It is assumed that free access to transmit and distribute electricity and broad choices for consumers are the main features for competition in both generation and retailing. The essence of formulating strategy is to relate a company with its environment, considering the industrial structure. The probable generic strategies and industrial trends are presented, and considerations are made concerned with the future expansion capacity. Finally, in the new industrial structure which will settle after the deregulation and privatization, the main strategic issues of the companies will likely focus on: profitability, cost control, managerial competence, consumer behavior, and new technologies, in special the ones related to modern thermal power plants. (author)

  18. Wireless distributed functional electrical stimulation system

    Directory of Open Access Journals (Sweden)

    Jovičić Nenad S

    2012-08-01

    Full Text Available Abstract Background The control of movement in humans is hierarchical and distributed and uses feedback. An assistive system could be best integrated into the therapy of a human with a central nervous system lesion if the system is controlled in a similar manner. Here, we present a novel wireless architecture and routing protocol for a distributed functional electrical stimulation system that enables control of movement. Methods The new system comprises a set of miniature battery-powered devices with stimulating and sensing functionality mounted on the body of the subject. The devices communicate wirelessly with one coordinator device, which is connected to a host computer. The control algorithm runs on the computer in open- or closed-loop form. A prototype of the system was designed using commercial, off-the-shelf components. The propagation characteristics of electromagnetic waves and the distributed nature of the system were considered during the development of a two-hop routing protocol, which was implemented in the prototype’s software. Results The outcomes of this research include a novel system architecture and routing protocol and a functional prototype based on commercial, off-the-shelf components. A proof-of-concept study was performed on a hemiplegic subject with paresis of the right arm. The subject was tasked with generating a fully functional palmar grasp (closing of the fingers. One node was used to provide this movement, while a second node controlled the activation of extensor muscles to eliminate undesired wrist flexion. The system was tested with the open- and closed-loop control algorithms. Conclusions The system fulfilled technical and application requirements. The novel communication protocol enabled reliable real-time use of the system in both closed- and open-loop forms. The testing on a patient showed that the multi-node system could operate effectively to generate functional movement.

  19. Wireless distributed functional electrical stimulation system.

    Science.gov (United States)

    Jovičić, Nenad S; Saranovac, Lazar V; Popović, Dejan B

    2012-08-09

    The control of movement in humans is hierarchical and distributed and uses feedback. An assistive system could be best integrated into the therapy of a human with a central nervous system lesion if the system is controlled in a similar manner. Here, we present a novel wireless architecture and routing protocol for a distributed functional electrical stimulation system that enables control of movement. The new system comprises a set of miniature battery-powered devices with stimulating and sensing functionality mounted on the body of the subject. The devices communicate wirelessly with one coordinator device, which is connected to a host computer. The control algorithm runs on the computer in open- or closed-loop form. A prototype of the system was designed using commercial, off-the-shelf components. The propagation characteristics of electromagnetic waves and the distributed nature of the system were considered during the development of a two-hop routing protocol, which was implemented in the prototype's software. The outcomes of this research include a novel system architecture and routing protocol and a functional prototype based on commercial, off-the-shelf components. A proof-of-concept study was performed on a hemiplegic subject with paresis of the right arm. The subject was tasked with generating a fully functional palmar grasp (closing of the fingers). One node was used to provide this movement, while a second node controlled the activation of extensor muscles to eliminate undesired wrist flexion. The system was tested with the open- and closed-loop control algorithms. The system fulfilled technical and application requirements. The novel communication protocol enabled reliable real-time use of the system in both closed- and open-loop forms. The testing on a patient showed that the multi-node system could operate effectively to generate functional movement.

  20. Estimation of particle size distribution of nanoparticles from electrical ...

    Indian Academy of Sciences (India)

    2018-02-02

    Feb 2, 2018 ... An indirect method of estimation of size distribution of nanoparticles in a nanocomposite is ... The present approach exploits DC electrical current–voltage ... the sizes of nanoparticles (NPs) by electrical characterization.

  1. Continuous Improvement and its Barriers in Electrical and Electronic Industry

    OpenAIRE

    Ahmad Md Fauzi; Yan Toh Li; Wei Chan Shiau; Aizat Ahmad Ahmad Nur; Raja Mohd Rasi Raja Zuraidah; Abdul Rahman Nor Aida; Muhd Nor Nik Hisyamudin; Hassan Mohd Fahrul; Hashim Fatan Adibah

    2017-01-01

    Continuous improvement is one of the core strategies for manufacturing excellent and it is considered vital in today’s business environment. Continuous improvement is an important factor in TQM implementation. However, manufacturers in Electrical and Electronic Industry is facing variety of challenges such as, time constraint, quality issue, headcount issue, human issue and competition in domestic as well as the global market. This paper presents total quality management practices in Electric...

  2. Tariffs regulation experiences in the Italian electricity industry

    International Nuclear Information System (INIS)

    Bianchi, A.

    1997-01-01

    This work tries to explain the tariff regulation experiences in the Italian electricity industry from the end of the second world war to now. These events, shown in the following tables, are divided into four phases: 1) the progressive standardization of electric power prices (1945-61); 2) the price control (1961-74); 3) the 'interferences' in the tariff system (1974-95); 4) the present deregulation (price-cap)

  3. Shadows and lights of the italian electricity industry

    International Nuclear Information System (INIS)

    Lanza, Salvatore; Silva, Francesco

    2006-01-01

    The passage of the electricity industry from a public monopoly vertically integrated to a decentralized and competitive system poses organizational, institutional, economic and technical problems whose complexity must be taken in due account. The recent electricity reform in Italy is a good test to verity the capabilities of the policy maker to design and implement such a difficult process. Inadequate competencies, doubts, conflicts and institutional rigidities produced a sub-optimal result [it

  4. Perspectives on the future of the electric utility industry

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, B. [Oak Ridge National Lab., TN (United States); Schaffhauser, A. [Tennessee Univ., Knoxville, TN (United States)

    1994-04-01

    This report offers perspectives on the future of the electric utility industry. These perspectives will be used in further research to assess the prospects for Integrated Resource Planning (IRP). The perspectives are developed first by examining economic, political and regulatory, societal, technological, and environmental trends that are (1) national and global in scope and (2) directly related to the electric utility industry. Major national and global trends include increasing global economic competition, increasing political and ethnic strife, rapidly changing technologies, and increasing worldwide concern about the environment. Major trends in the utility industry include increasing competition in generation; changing patterns of electricity demand; increasing use of information technology to control power systems; and increasing implementation of environmental controls. Ways in which the national and global trends may directly affect the utility industry are also explored. The trends are used to construct three global and national scenarios- ``business as usual,`` ``technotopia future,`` and ``fortress state`` -and three electric utility scenarios- ``frozen in headlights,`` ``megaelectric,`` and ``discomania.`` The scenarios are designed to be thought provoking descriptions of potential futures, not predictions of the future, although three key variables are identified that will have significant impacts on which future evolves-global climate change, utility technologies, and competition. While emphasis needs to be placed on understanding the electric utility scenarios, the interactions between the two sets of scenarios is also of interest.

  5. Perspectives on the future of the electric utility industry

    International Nuclear Information System (INIS)

    Tonn, B.; Schaffhauser, A.

    1994-04-01

    This report offers perspectives on the future of the electric utility industry. These perspectives will be used in further research to assess the prospects for Integrated Resource Planning (IRP). The perspectives are developed first by examining economic, political and regulatory, societal, technological, and environmental trends that are (1) national and global in scope and (2) directly related to the electric utility industry. Major national and global trends include increasing global economic competition, increasing political and ethnic strife, rapidly changing technologies, and increasing worldwide concern about the environment. Major trends in the utility industry include increasing competition in generation; changing patterns of electricity demand; increasing use of information technology to control power systems; and increasing implementation of environmental controls. Ways in which the national and global trends may directly affect the utility industry are also explored. The trends are used to construct three global and national scenarios- ''business as usual,'' ''technotopia future,'' and ''fortress state'' -and three electric utility scenarios- ''frozen in headlights,'' ''megaelectric,'' and ''discomania.'' The scenarios are designed to be thought provoking descriptions of potential futures, not predictions of the future, although three key variables are identified that will have significant impacts on which future evolves-global climate change, utility technologies, and competition. While emphasis needs to be placed on understanding the electric utility scenarios, the interactions between the two sets of scenarios is also of interest

  6. Institutional contexts of market power in the electricity industry

    International Nuclear Information System (INIS)

    Foer, A.A.

    1999-01-01

    Market power is widely recognized as one of the principal issues that must be dealt with if the electricity industry is to make the transition from regulation to competition. In this article, the author provides a legal and economic introduction to what the antitrust community means by market power and offers a primer on why market power is so central an issue in the electricity industry. Finally and most importantly, he offers comments on the institutional contexts of market power, exploring a process which he calls Shermanization that helps explain the institutional aspect of moving from regulation to competition and holds implications for where oversight should reside during this complex transition

  7. Distributional impacts of climate change mitigation in Indian electricity: The influence of governance

    International Nuclear Information System (INIS)

    Rao, Narasimha D.

    2013-01-01

    Studies that examine the distributional impacts of climate change mitigation policies often neglect the influence of institutions that implement these policies. This study examines the short-term consumption-side distributional impacts of expanding low-carbon electric supply in the state of Maharashtra, India with a focus on the influence of regulatory discretion in pricing. Households' welfare impacts from economy-wide electricity price shocks are simulated against a baseline that is calibrated to actual household economic and electricity service conditions, including actual electricity budgets, block tier prices and supply rationing. Industrial price impacts are propagated to households using a Leontief input–output analysis. Regulatory pricing decisions are evaluated based on social welfare metrics for economic efficiency and income inequality. The analysis reveals new linkages between climate change mitigation, electricity policy and income distribution. Low-income households can be shielded from mitigation impacts without losses in aggregate welfare to the extent that regulators can recover mitigation costs through industrial price increases. Regulators' flexibility to distribute costs across households is constrained by industrial customers' migration off the grid. Reduced supply interruptions to the rural poor from the resulting demand contraction are a potential co-benefit of mitigation. Distributional impacts, therefore, depend on other electricity policies that are driven by the political economy of the sector. - Highlights: • Indirect price increases harm most households less than residential price increases. • Regulators have flexibility to distribute mitigation costs across income groups. • Reduced supply interruptions are a potential co-benefit of mitigation

  8. Energy balance of the global photovoltaic (PV) industry--is the PV industry a net electricity producer?

    Science.gov (United States)

    Dale, Michael; Benson, Sally M

    2013-04-02

    A combination of declining costs and policy measures motivated by greenhouse gas (GHG) emissions reduction and energy security have driven rapid growth in the global installed capacity of solar photovoltaics (PV). This paper develops a number of unique data sets, namely the following: calculation of distribution of global capacity factor for PV deployment; meta-analysis of energy consumption in PV system manufacture and deployment; and documentation of reduction in energetic costs of PV system production. These data are used as input into a new net energy analysis of the global PV industry, as opposed to device level analysis. In addition, the paper introduces a new concept: a model tracking energetic costs of manufacturing and installing PV systems, including balance of system (BOS) components. The model is used to forecast electrical energy requirements to scale up the PV industry and determine the electricity balance of the global PV industry to 2020. Results suggest that the industry was a net consumer of electricity as recently as 2010. However, there is a >50% that in 2012 the PV industry is a net electricity provider and will "pay back" the electrical energy required for its early growth before 2020. Further reducing energetic costs of PV deployment will enable more rapid growth of the PV industry. There is also great potential to increase the capacity factor of PV deployment. These conclusions have a number of implications for R&D and deployment, including the following: monitoring of the energy embodied within PV systems; designing more efficient and durable systems; and deploying PV systems in locations that will achieve high capacity factors.

  9. Methods for Estimation of Market Power in Electric Power Industry

    Science.gov (United States)

    Turcik, M.; Oleinikova, I.; Junghans, G.; Kolcun, M.

    2012-01-01

    The article is related to a topical issue of the newly-arisen market power phenomenon in the electric power industry. The authors point out to the importance of effective instruments and methods for credible estimation of the market power on liberalized electricity market as well as the forms and consequences of market power abuse. The fundamental principles and methods of the market power estimation are given along with the most common relevant indicators. Furthermore, in the work a proposal for determination of the relevant market place taking into account the specific features of power system and a theoretical example of estimating the residual supply index (RSI) in the electricity market are given.

  10. Electrical energy industry regulation: trend in the international context

    International Nuclear Information System (INIS)

    Perez Arriaga, J.I.

    1995-01-01

    The regulation of the electric power industry is presently experiencing significative changes world-wide at an unprecedented pace. In these circumstances it is useless to attempt the preparation of a static snapshot of the current situation, because of the difficulties in capturing the exact position of each player and also because the picture would become obsolete in a very short time. This paper presents the specific features characterising power organisation, the regulatory approaches to the several services involved in supplying electricity, and alternative schemes for introduction of different levels of competition in traditionally regulated electric systems. (Author) 24 refs

  11. Electricity supply enterprises: Profits in comparison between industries

    International Nuclear Information System (INIS)

    Kuehnl, U.

    1995-01-01

    The acquisition of participations by major electricity supply enterprises during the last years met with strong criticism from the general public and revived the controversial discussion about electricity prices and profits. Yet the electricity industry is subject to specific legal price controls guaranteeing a price formation that is cost-economical, just and fair under the causation principle and does not permit excessive profits. Under this aspect and against the background of discussing this issue on an economic basis the author presents an empirical survey. (orig.)

  12. The impact of electricity market liberalization in Turkey. 'Free consumer' and distributional monopoly cases

    International Nuclear Information System (INIS)

    Bahce, Serdal; Taymaz, Erol

    2008-01-01

    Electricity sector has grown substantially in Turkey since the early 1960s as a result of rapid industrialization and urbanization. The vertically integrated state-owned company had a legally established monopoly on the generation, transmission and distribution of electricity in Turkey. With the support and encouragement of international organizations like the World Bank, Turkey has initiated a comprehensive program to liberalize and privatize the electricity market in 2001. The liberalization of the electricity market in Turkey started in the distribution side of the market. The distribution network was divided into 21 distribution regions and in each of these, separate - initially state-owned - distribution companies have been authorized to distribute and sell electricity. The plan envisaged to complete privatization of all distribution companies until the end of 2006. This study compares the welfare implication of privatization of the distribution networks by comparing two extreme cases, a pure regional distributional monopoly case and a representative pure 'free' consumer case, with a benchmark case of administered price regulation. For this purpose, we develop a simulation model of the Turkish electricity system, and use the data on generation and distribution costs. Our simulation analysis shows that substantial welfare losses occur if the distributional companies behave as regional monopolists. Our findings reiterate the importance of regulation and market design. (author)

  13. Electric Utility Transmission and Distribution Line Engineering Program

    Energy Technology Data Exchange (ETDEWEB)

    Peter McKenny

    2010-08-31

    Economic development in the United States depends on a reliable and affordable power supply. The nation will need well educated engineers to design a modern, safe, secure, and reliable power grid for our future needs. An anticipated shortage of qualified engineers has caused considerable concern in many professional circles, and various steps are being taken nationwide to alleviate the potential shortage and ensure the North American power system's reliability, and our world-wide economic competitiveness. To help provide a well-educated and trained workforce which can sustain and modernize the nation's power grid, Gonzaga University's School of Engineering and Applied Science has established a five-course (15-credit hour) Certificate Program in Transmission and Distribution (T&D) Engineering. The program has been specifically designed to provide working utility engineering professionals with on-line access to advanced engineering courses which cover modern design practice with an industry-focused theoretical foundation. A total of twelve courses have been developed to-date and students may select any five in their area of interest for the T&D Certificate. As each course is developed and taught by a team of experienced engineers (from public and private utilities, consultants, and industry suppliers), students are provided a unique opportunity to interact directly with different industry experts over the eight weeks of each course. Course material incorporates advanced aspects of civil, electrical, and mechanical engineering disciplines that apply to power system design and are appropriate for graduate engineers. As such, target students for the certificate program include: (1) recent graduates with a Bachelor of Science Degree in an engineering field (civil, mechanical, electrical, etc.); (2) senior engineers moving from other fields to the utility industry (i.e. paper industry to utility engineering or project management positions); and (3) regular

  14. Semi-Tandem Electric Distributed Wing Zip Aviation Advanced Concept

    Data.gov (United States)

    National Aeronautics and Space Administration — This project aims to develop a unique distributed electric propulsion approach that provides breakthrough capability improvements across conventional take-off and...

  15. Regulation of electricity distribution: Issues for implementing a norm model

    International Nuclear Information System (INIS)

    Bjoerndal, Endre; Bjoerndal, Mette; Bjoernenak, Trond; Johnsen, Thore

    2005-01-01

    The Norwegian regulation of transmission and distribution of electricity is currently under revision, and several proposals, including price caps, various norm models and adjustments to the present revenue cap model, have been considered by the Norwegian regulator, NVE. Our starting point is that a successful and sustainable income-regulation-model for electricity distribution should be in accordance with the way of thinking, and the managerial tools of modern businesses. In the regulation it is assumed that decisions regarding operations and investments are made by independent, business oriented entities. The ambition of a dynamically efficient industry therefore requires that the regulatory model and its implementation support best practice business performance. This will influence how the cost base is determined and the way investments are dealt with. We will investigate a possible implementation of a regulatory model based on cost norms. In this we will distinguish between on the one hand, customer driven costs, and on the other hand, costs related to the network itself. The network related costs, which account for approximately 80% of the total cost of electricity distribution, include the costs of operating and maintaining the network, as well as capital costs. These are the ''difficult'' costs, as their levels depend on structural and climatic factors, as well as the number of customers and the load that is served. Additionally, the costs are not separable, since for instance maintenance and investments can be substitutable activities. The work concentrates on verifying the cost model, and evaluating implications for the use of the present efficiency model (DEA) in the regulation. Moreover, we consider how network related costs can be managed in a norm model. Finally, it is highlighted that an important part of a regulatory model based on cost norms is to devise quality measures and how to use them in the economic regulation. (Author)

  16. Technique applied in electrical power distribution for Satellite Launch Vehicle

    Directory of Open Access Journals (Sweden)

    João Maurício Rosário

    2010-09-01

    Full Text Available The Satellite Launch Vehicle electrical network, which is currently being developed in Brazil, is sub-divided for analysis in the following parts: Service Electrical Network, Controlling Electrical Network, Safety Electrical Network and Telemetry Electrical Network. During the pre-launching and launching phases, these electrical networks are associated electrically and mechanically to the structure of the vehicle. In order to succeed in the integration of these electrical networks it is necessary to employ techniques of electrical power distribution, which are proper to Launch Vehicle systems. This work presents the most important techniques to be considered in the characterization of the electrical power supply applied to Launch Vehicle systems. Such techniques are primarily designed to allow the electrical networks, when submitted to the single-phase fault to ground, to be able of keeping the power supply to the loads.

  17. The first step in restructuring the US electric industry

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, A.H. [American University of Sharjah (United Arab Emirates); Reutter, K.A. [Nathan Associates, Auburn (United States); Thompson, H. [Auburn University (United States). Comer Hall

    2005-03-01

    The electric industry lobbied for its first step in restructuring, from local franchises to regulated state monopolies during the early 1900s. The present paper examines this restructuring with an empirical model that includes the introduction of natural gas and steam turbine generators. The restructuring resulted in fewer firms, higher costs, and higher prices, consistent with increased monopoly power and captured regulators. (author)

  18. The first step in restructuring the US electric industry

    International Nuclear Information System (INIS)

    Barnett, A.H.; Reutter, K.A.; Thompson, H.

    2005-01-01

    The electric industry lobbied for its first step in restructuring, from local franchises to regulated state monopolies during the early 1900s. The present paper examines this restructuring with an empirical model that includes the introduction of natural gas and steam turbine generators. The restructuring resulted in fewer firms, higher costs, and higher prices, consistent with increased monopoly power and captured regulators. (author)

  19. Challenges in sensor development for the electric utility industry

    Science.gov (United States)

    Ward, Barry H.

    1999-01-01

    The electric utility industry is reducing operating costs in order to prepare for deregulation. The reduction in operating cost has meant a reduction in manpower. The ability to utilize remaining maintenance staff more effectively and to stay competitive in a deregulated environment has therefore become critical. In recent years, the industry has moved away from routine or periodic maintenance to predictive or condition based maintenance. This requires the assessment of equipment condition by frequent testing and inspection; a requirement that is incompatible with cost reduction. To overcome this dilemma, industry trends are toward condition monitoring, whereby the health of apparatus is monitored continuously. This requires the installation of sensors hr transducers on power equipment and the data taken forwarded to an intelligent device for further processing. These devices then analyze the data and make evaluations based on parameter levels or trends, in an attempt to predict possible deterioration. This continuous monitoring allows the electric utility to schedule maintenance on an as needed basis. The industry has been faced with many challenges in sensor design. The measurement of physical, chemical and electrical parameters under extreme conditions of electric fields, magnetic fields, temperature, corrosion, etc. is extensive. This paper will give an overview of these challenges and the solutions adopted for apparatus such as power transformers, circuit breakers, boilers, cables, batteries, and rotating machinery.

  20. Performance issues for a changing electric power industry

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    Extremely cold weather created record demands for electricity in the eastern two-thirds of the United States during the week of January 16, 1994. Fuel-related problems, mostly the result of transportation constraints resulting from ice accumulation on roads and water-ways, and unexpected generating capacity outages at utilities and nonutilities resulted in demand not being met. Some utilities asked nonessential customers along with State governments and a portion of the Federal Government to shut down. Two electric control areas, the Pennsylvania-New Jersey-Maryland Interconnection (PJM) and Virginia Electric & Power Company (VEPCO), instituted rolling blackouts. This disturbance was reported widely in the press and, along with other disturbances, peaked renewed interest in the reliability of the electric power system. The renewed interest in reliability has coincided with substantial changes that are beginning to occur in the structure and competitiveness of the electric power industry. Juxtaposing the question of reliability and the issue of changing industry structure leads to the central concern of this report: What effect, if any, will the changing structure of the industry have on the reliability of the system?

  1. Air quality enhancement by reducing emissions from electric power industry

    International Nuclear Information System (INIS)

    Hamzeh, Ali

    2006-01-01

    The electric power industry is responsible for electricity generations, transmission and distribution. The system is dominated by thermal electricity generation (in Syria its share is about 80%). The fossil fuels used in te thermal power plants are a major stationary source of greenhouse gases (GHG) in addition to other pollutant. The primary GHG are CO 2 , NO x , SO 2 , CO, and VOC, of which CO 2 is believed to account for about half of the global warming. There are many approaches to reduce the amount of pollutants emitted from power systems. The best measures as given mainly by Intergovernmental Panel on Climate Change (IPCC), 1996 are presented in the paper. From the efficiency and sustainability side of view, the implementation of these approaches cannot be done optimally without an integrated environmental management program (EMP). The paper proposes an EMP as a conceptual strategy using a set of evaluation criteria to be applied on the power system on concern. As a final item, a case study of the Syrian power system is presented. The energy system in Syria emitted about 115 million tons of CO 2 in the year 2000. The electric power system alone consumes approximately 36% of the total consumed fossil fuels in the country, and is responsible of about 35-40% of the CO 2 emissions. The Syrian power system has three major problems (like many systems in the region) which need to be resolved in order to improve its operation and consequently to reduce the emission of green house gases. First, the technical electrical losses are about 25-30% of net generated electricity. Second, the power factor has reached alarming levels in various parts of the power system. Third, the efficiencies in all power plant units are very low and still decreasing rapidly. The paper gives an overview of the energy sector in Syria showing a significant potential for energy efficiency and environmental protection projects. The main outcome of the case study is a comprehensive program

  2. Monopoly and competition in the electric power industry

    International Nuclear Information System (INIS)

    Eugeniu, P.; Rucareanu, L.C.

    1995-01-01

    The authors show how some of the electric energy characteristics can lead to monopoly and state control and how this trend acts in the totalitarian regimes and in the market economy countries. For exemplification, the organization of the electricity industry in several countries, its evolution and its trends for the near future, are shown. Taking into consideration the Romanian present situation, there are underlined the factors able to ensure the transition to a regime based on private property and competition. Finally it is shown that the Romanian electricity industry requires a two stage implementation of the privatization process: first a non-cession form implying management contracts, loaning contracts, concessions in exploitation and public and private enterprises associations, followed by a cession form when the capital is privatized by direct selling. (author)

  3. Distributed Generation of Electricity and its Environmental Impacts

    Science.gov (United States)

    Distributed generation refers to technologies that generate electricity at or near where it will be used. Learn about how distributed energy generation can support the delivery of clean, reliable power to additional customers.

  4. Efficiency and environmental factors in the US electricity transmission industry

    International Nuclear Information System (INIS)

    Llorca, Manuel; Orea, Luis; Pollitt, Michael G.

    2016-01-01

    The electricity industry in most developed countries has been restructured over recent decades with the aim of improving both service quality and firm performance. Regulated segments (e.g. transmission) still provide the infrastructure for the competitive segments and represent a significant share of the total price paid by final customers. However there is a lack of empirical studies that analyse firms' performance in the electricity transmission sector. In this paper an empirical analysis of US electricity transmission companies is conducted for the period 2001–2009. We use alternative stochastic frontier models that allow us to identify the determinants of firms' inefficiency. These models also permit us to control for weather conditions, potentially one of the most decisive uncontrollable factors in electricity transmission. Our results suggest that weather conditions clearly have an influence on transmission costs and that there is room for improvement in the management of US electricity transmission systems. Regulators should also be aware that more adverse conditions generate higher levels of inefficiency, and that achieving long-term efficiency improvements tends to worsen firms' short-term relative performance. - Highlights: • We analyse firms' performance in the US electricity transmission industry. • Alternative SFA models are estimated to identify determinants of firms' efficiency. • Our results indicate that firms' efficiency has declined and diverged over time. • We find that more adverse conditions generate higher levels of inefficiency.

  5. Electric power industry in Korea: Past, present, and future

    International Nuclear Information System (INIS)

    Lee, Hoesung.

    1994-01-01

    Electrical power is an indispensable tool in the industrialization of a developing country. An efficient, reliable source of electricity is a key factor in the establishment of a wide range of industries, and the supply of energy must keep pace with the increasing demand which economic growth creates in order for that growth to be sustained. As one of the most successful of all developing countries, Korea has registered impressive economic growth over the last decade, and it could be said that the rapid growth of the Korean economy would not have been possible without corresponding growth in the supply of electric power. Power producers in Korea, and elsewhere in Asia, are to be commended for successfully meeting the challenge of providing the necessary power to spur what some call an economic miracle. The future continues to hold great potential for participants in the electrical power industry, but a number of important challenges must be met in order for that potential to be fully realized. Demand for electricity continues to grow at a staggering rate, while concerns over the environmental impact of power generating facilities must not be ignored. As it becomes increasingly difficult to finance the rapid, and increasingly larger-scale expansion of the power industry through internal sources, the government must find resources to meet the growing demand at least cost. This will lead to important opportunities for the private sector. It is important, therefore, for those interested in participating in the power production industry and taking advantage of the newly emerging opportunities that lie in the Korean market, and elsewhere in Asia, to discuss the relevant issues and become informed of the specific conditions of each market

  6. Cost efficiency and optimal scale of electricity distribution firms in Taiwan: An application of metafrontier analysis

    International Nuclear Information System (INIS)

    Huang, Y.-J.; Chen, K.-H.; Yang, C.-H.

    2010-01-01

    This paper analyzes the cost efficiency and optimal scale of Taiwan's electricity distribution industry. Due to the substantial difference in network density, firms may differ widely in production technology. We employ the stochastic metafrontier approach to estimate the cost efficiency of 24 distribution units during the period 1997-2002. Empirical results find that the average cost efficiency is overestimated using the traditional stochastic frontier model, especially for low density regions. The average cost efficiency of the high density group is significantly higher than that of the low density group as it benefits from network economies. This study also calculates both short-term and long-term optimal scales of electricity distribution firms, lending policy implications for the deregulation of the electricity distribution industry.

  7. DISTRIBUTED ELECTRICAL POWER PRODUCTION SYSTEM AND METHOD OF CONTROL THEREOF

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to a distributed electrical power production system wherein two or more electrical power units comprise respective sets of power supply attributes. Each set of power supply attributes is associated with a dynamic operating state of a particular electrical power unit....

  8. Powering China: Reforming the electric power industry in China

    International Nuclear Information System (INIS)

    Yi-Chong Xu

    2002-01-01

    The book reports on the rapidly changing face of the electricity business in China. Reforms by the central government and the need for more and more electric power have pushed the electricity sector from a central planned economy to a markets-based system. The international ramifications of China's reform programme are discussed. The author describes electricity industry reform in other countries including the USA and UK. The author points out that in China after 1998 there was a move to recentralise control but by then it was too late to reverse the reforms. The problems of tariff policies, pricing, and sources of new investments, including from foreign countries, are discussed. The final section of the book deals with problems arising from the need for massive retrenchment of power-section workers, cross-subsidies, and triangular debts. The book is said to provide a sound description of the political economy of power reform in China without getting bogged down in economic modelling

  9. Method of imaging the electrical conductivity distribution of a subsurface

    Science.gov (United States)

    Johnson, Timothy C.

    2017-09-26

    A method of imaging electrical conductivity distribution of a subsurface containing metallic structures with known locations and dimensions is disclosed. Current is injected into the subsurface to measure electrical potentials using multiple sets of electrodes, thus generating electrical resistivity tomography measurements. A numeric code is applied to simulate the measured potentials in the presence of the metallic structures. An inversion code is applied that utilizes the electrical resistivity tomography measurements and the simulated measured potentials to image the subsurface electrical conductivity distribution and remove effects of the subsurface metallic structures with known locations and dimensions.

  10. Distributed control of deregulated electrical power networks

    NARCIS (Netherlands)

    Hermans, R.M.

    2012-01-01

    A prerequisite for reliable operation of electrical power networks is that supply and demand are balanced at all time, as efficient ways for storing large amounts of electrical energy are scarce. Balancing is challenging, however, due to the power system's dimensions and complexity, the low

  11. Impacts of Electric Vehicle Loads on Power Distribution Systems

    DEFF Research Database (Denmark)

    Pillai, Jayakrishnan Radhakrishna; Bak-Jensen, Birgitte

    2010-01-01

    operation. This paper investigates the effects on the key power distribution system parameters like voltages, line drops, system losses etc. by integrating electric vehicles in the range of 0-50% of the cars with different charging capacities. The dump as well as smart charging modes of electric vehicles......Electric vehicles (EVs) are the most promising alternative to replace a significant amount of gasoline vehicles to provide cleaner, CO2 free and climate friendly transportation. On integrating more electric vehicles, the electric utilities must analyse the related impacts on the electricity system...... is applied in this analysis. A typical Danish primary power distribution system is used as a test case for the studies. From the simulation results, not more than 10% of electric vehicles could be integrated in the test system for the dump charging mode. About 40% of electric vehicle loads could...

  12. Development on power distribution technologies of four electric power companies in Japan. The Kansai Electric Power Co. , Inc

    Energy Technology Data Exchange (ETDEWEB)

    1989-07-01

    Since dependency upon electric power has been rising yearly with the development of industry and the progress of information-oriented society, various kinds of technical development are needed to supply electricity. Furthermore, amenity of people's living has been highly intended, and life style has varied. Consequently, customers' needs for energy including related services have varied remarkably, and each customer has selected energy more subjectively from the wide range of viewpoint such as reliability, handiness, cleanliness, safety, and economic efficiency. In such situation, the power distribution section of Kansai Electric Power settled four themes for major technical development and has been promoting them. Four themes are as follows; to develop a total automation system for power distribution, to promote 20kV/400V-class power distribution, to develop techniques to form facilities harmonizing with local amenity, and to make business management efficient with the advanced NC system. 3 figs., 4 tabs.

  13. Electricity industry restructuring revisited: the case of Korea

    International Nuclear Information System (INIS)

    Lee, Byoung-Hoon; Ahn, Hyeon-Hyo

    2006-01-01

    In 2004, the Korean Government suspended its electricity market reform based on the two-thirds majority recommendation of a six-member joint study team. This suspension effectively interrupts the basic plan adopted in 1998 by the previous administration to divest and privatize Korea Electric Power Corporation's (KEPCO's) generation segment in 2000-2002, implement transmission open access and wholesale competition by 2008, and introduce retail competition thereafter. This policy-decision followed the controversial debate on electricity market reform in Korea. Reform proponents claim that electricity can be treated as ordinary goods exchangeable in the competitive market, and any problems caused by the transition to the market system are manageable. By contrast, reform opponents argue that effective competition of the power industry is not yet feasible due to the idiosyncratic nature of electricity (e.g., low-price elasticity of demand and not being storable at low cost) as well as the country's isolated electricity network. In suspending the electricity reform, the current administration accepted the final conclusion of the joint study team in the Tripartite Commission on the ground that the alleged benefits of reform are theoretical and uncertain, while the real costs and risks are substantial. (author)

  14. NEDO report (April, 1995). Restructuring California's electric services industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    Recognizing nationwide changes in the electric utilities industry, Congress enacted the Energy Policy Act of 1992 (EPAct). The purpose is to foster competition and a basis on market mechanisms as the preferred means to develop and deliver energy services. The California Public Utilities Commission (CPUC) hoped to better understand this change while emphasizing efforts to maintain safe, reliable, and reasonably priced electric service. According to the report in February, 1993, CPUC was considering reform of its regulatory program in view of technological change, competitive pressures and emerging market forces. Further, new electric service providers have entered the industry, intensifying competition and producing the opportunity and pressure for consumer choice. Consequently, CPUC are asking the industry to adopt strategic measures to deal with the regulation such as reduced costs and development of efficient innovative services. Hearings have been repeated for the revision of the law; however, the confusion will continue for the time being. Some kind of revision will be concluded within 1995; however, no deregulation will be implemented for the power industry probably until 1996. (NEDO)

  15. FDI spillovers at different levels of industrial and spatial aggregation: Evidence from the electricity sector

    International Nuclear Information System (INIS)

    Del Bo, Chiara F.

    2013-01-01

    The European electricity sector has undergone significant reforms in recent years, in the direction of market opening, integration and privatization. National and regional markets are now characterized by the presence of domestic and foreign firms, both privately and publicly owned. Did foreign entry induce positive productivity spillovers to domestic firms in the electricity sector, both at the aggregate and disaggregated level, while also controlling for domestic firms' ownership? This paper examines this issue by focusing on regional foreign direct investment (FDI) spillovers in the aggregated electricity sector and in the disaggregated sub-sectors of generation and distribution. The results show the importance of industry aggregation in determining the existence and sign of regional FDI spillovers for domestic firms. FDI spillovers are then calculated based on a purely geographic scale, by considering the distance between each firm's city of location and firms in neighboring cities. The importance and sign of FDI spillovers is different with respect to the analysis based on regional administrative boundaries, suggesting that spatial aggregation, along with industrial aggregation, is relevant in accounting for productivity spillover effects of foreign presence in the EU electricity sector. - Highlights: • Has the post-reform entry of foreign firms in the EU electricity sector induced spillover effects? • Spatial and industrial disaggregation are important when evaluating foreign direct investment (FDI) spillovers. • Positive horizontal spillovers are found only in the distribution segment of the industry. • Vertical spillovers in generation are negative; positive in distribution. • Spillover intensity in distribution decreasing with distance; regional dimension relevant in generation

  16. Steady development of the electric power industry in Azerbaijan

    International Nuclear Information System (INIS)

    Movsumov, S.H.

    2004-01-01

    Full text : Application aspects of alternative energy sources as the most comprehensible and renewable sources are considered. Among them the paramount role in fuel and energy balance of the country plays an organic fuel using of which renders an irreparable harm to an environment. Therefore application of organic fuel admits unacceptable in the industrial countries as it does not provide sufficient development of power industry. With the purpose of more expedient development of power industry conducting of increase procedures of production efficiency of the electric power, and also using additional alternative energy sources, such as a solar energy, a wind power, biomass energy and also energy of water is necessary. It is important to mark that using of renewable sources of energy reduces emission of harmful waste products on an environment. Further in this each of the marked sources are separately described, and also ways of the further development of this branch of power industry are specified [ru

  17. Competition in the electricity supply industry. Experiences from Europe and the United States

    International Nuclear Information System (INIS)

    Olsen, O.J.

    1995-01-01

    Introducing competition in the electricity industry is a major social experiment. Historically, the industry has been heavily regulated, however, this is no longer the case. Production and sales are being opened for competition and separated from the network services, transmission and distribution. This book includes papers from a Nordic Conference held in September 1994 in Copenhagen. The conference was planned as a part of the Energy Research Programme under the Nordic Council of Ministers and the object was to discuss the Nordic experience of competition in the electricity industry in comparison with other Western countries. The U.K. was the first European country to introduce competition in its electricity industry. Norway came next and two other Nordic countries - Sweden and Finland - have decided to follow suit. The U.S. started earlier than the European countries opening for limited competition in power production. However, the background of the reforms and its approach in the U.S. is different from Europe and far less radical. The experience of two Central European countries - Germany and The Netherlands - is also included in this book. Both countries have many institutional similarities to the Nordic countries, but they are - together with Denmark - more hesitant about introducing competition in their electricity industries. (au)

  18. Games for electricity traders: Understanding risk in a deregulated industry

    Energy Technology Data Exchange (ETDEWEB)

    Dyner, Isaac [Energy Institute, CeiBA-Complexity Center, Universidad Nacional de Colombia AA 1027 Medellin (Colombia)], E-mail: idyner@unalmed.edu.co; Larsen, Erik [Faculty of Economics, University of Lugano, Via Buffi 13 CH-6900 Lugano (Switzerland)], E-mail: erik.larsen@lu.unisi.ch; Franco, Carlos Jaime [Energy Institute, CeiBA-Complexity Center, Universidad Nacional de Colombia AA 1027 Medellin (Colombia)], E-mail: cjfranco@unalmed.edu.co

    2009-02-15

    We illustrate and discuss the use of a computer-based learning environment, known as a microworld, for training agents in the Colombian electricity market. As the market operator was concerned with efficiency in the electricity spot market because of an insufficient number of participants, they commissioned a tool that could help potential participants to learn about both market operation as well as the risk management it involved. By making the industry more transparent it was intended that a larger number of traders and companies would participate in the market, making it more efficient. We describe the development and use of this tool, which is based on system dynamics and gaming.

  19. Games for electricity traders. Understanding risk in a deregulated industry

    Energy Technology Data Exchange (ETDEWEB)

    Dyner, Isaac; Franco, Carlos Jaime [Energy Institute, CeiBA-Complexity Center, Universidad Nacional de Colombia AA 1027 Medellin (Colombia); Larsen, Erik [Faculty of Economics, University of Lugano, Via Buffi 13 CH-6900 Lugano (Switzerland)

    2009-02-15

    We illustrate and discuss the use of a computer-based learning environment, known as a microworld, for training agents in the Colombian electricity market. As the market operator was concerned with efficiency in the electricity spot market because of an insufficient number of participants, they commissioned a tool that could help potential participants to learn about both market operation as well as the risk management it involved. By making the industry more transparent it was intended that a larger number of traders and companies would participate in the market, making it more efficient. We describe the development and use of this tool, which is based on system dynamics and gaming. (author)

  20. Games for electricity traders. Understanding risk in a deregulated industry

    International Nuclear Information System (INIS)

    Dyner, Isaac; Franco, Carlos Jaime; Larsen, Erik

    2009-01-01

    We illustrate and discuss the use of a computer-based learning environment, known as a microworld, for training agents in the Colombian electricity market. As the market operator was concerned with efficiency in the electricity spot market because of an insufficient number of participants, they commissioned a tool that could help potential participants to learn about both market operation as well as the risk management it involved. By making the industry more transparent it was intended that a larger number of traders and companies would participate in the market, making it more efficient. We describe the development and use of this tool, which is based on system dynamics and gaming. (author)

  1. Irradiation Crosslinking of Polyamides for the Electrical and Automotive Industry

    International Nuclear Information System (INIS)

    Gehring, J.

    2006-01-01

    Irradiation crosslinking of electrical cables and heat shrinkable tubes have been widely accepted in the automotive and electrical industry for a long time. Due higher demands regarding temperature resistance, arc resistance and good chemical resistance against oil and greases crosslinked injection moulded parts made out of polyamid and polybutylentherephtalate become also more and more interesting. Crosslinked polyamide can also replace thermosets for switches and offers therefore additional financial benefits. It will be shown on the basis of already realized projects, which basic requirements exist and how irradiation crosslinking can fulfil these demands

  2. New competition hits the U.S. electric industry

    International Nuclear Information System (INIS)

    Hunter, M.

    1993-01-01

    Three case studies of competition in the United States electric industry are described which illustrate some of the most striking characteristics of the new competitive situation: utilities foraging in other service areas for long-term customers, customers playing one service-area's pricing against another to obtain better terms, and new generating entities being created with the option of seeking mandated transmission access. The trends illustrated by these studies indicate a move away from a regulated monopoly setting toward a market in which the price of bulk electricity is driven down toward the long-run marginal cost of the service. In New England, non-utility generation in 1992 accounted for 17% of electricity sales, up from essentially zero in 1980. Although increasing competition among electric utilities could lower electric power prices and improve industrial competitiveness, there are several concerns which may signify unpleasant outcomes for electric utilities. These concerns include inefficient investment, in which local utility grids are bypassed in favor of other generating units whose competitive advantage may be the result of arbitrary cost-shifting; the exit of large power users placing more of a fixed-cost burden on the remaining customers of a utility, resulting in a vicious spiral of more defections; and insecurities in purchasing power from a new supplier who may not be subject to the same legal obligations as a local utility. Recommendations are made for accommodating more competition without causing adverse effects, including proper pricing of transmission, helping utilities compete on generation, and avoiding non-electric mandates for utilities. 9 refs

  3. Questions of the day in the electricity supply industry

    Energy Technology Data Exchange (ETDEWEB)

    Schenk, P [Vereinigung Deutscher Elektrizitaetswerke e.V. (VDEW), Frankfurt am Main (Germany, F.R.)

    1977-06-01

    The author deals with the especially important points that have given rise to the situation in the German electricity supply industry since the oil-price crisis, and in particular in the year 1976. He then turns to the present urgent problems facing the supply industry. The following are discussed: the energy program; meeting the power demand; nuclear energy from licensing up to the disposal of the waste material; use of conventional power stations; actions by associations/initiatives; saving of energy; promotion of energy consumption by advertising; and power/heat coupling.

  4. THE COSTS OF THE ELECTRICAL ENERGY IN THE ALUMINIUM INDUSTRY

    Directory of Open Access Journals (Sweden)

    Cilianu Marian

    2012-07-01

    Full Text Available The economic crisis has given the opportunity to reconsider the use of resources, so the subject of competitive advantage has become actual. In the aluminium industry the cost of electrical energy is critical not only for competitive reasons but for the mere existence and performance of numerous production facilities . Several ways of resisting the pressure of high energy costs have been experimented the most promising being those based on different forms of public-private partnership/co-operation. In many countries the big industrial producers benefit from a special treatment concerning the energy acquisition and are supported by the government in order to remain competitive.

  5. Geothermal energy and the bulk electric power and petroleum industries

    Energy Technology Data Exchange (ETDEWEB)

    Bierman, S.

    1977-01-01

    The roles of competition and power pooling in the utility industry are assessed and explained, and the structure of the Western Electric Utility industry is evaluated. It is argued that a hostile environment for small utilities, maintained by larger investor-owned utilities and by the Bureau of Reclamation, leads to a combination of motives for rapid development of geothermal resources and impedes their success. It is suggested that the impediment feature of the hostile environment for small utilities could be alleviated by granting small utilities access to pooling and, relatedly, by improving the power marketing performance of the Bureau of Reclamation. (MHR)

  6. Questions of the day in the electricity supply industry

    International Nuclear Information System (INIS)

    Schenk, P.

    1977-01-01

    In his exposition the author deals with the especially important points which have given rise to the situation in the German electricity supply industry since the oil-price crisis, and in particular in the year 1976. He then turns to the present urgent problems facing this branch of industry. As key-words we would mention: the energy programme; meeting the power demand; and nuclear energy from licensing up to the disposal of the waste material; the use of conventional power stations; actions by associations/initiatives; saving of energy; promotion of energy consumption by advertising and power/heat coupling. (orig.) [de

  7. Results of the electricity power industry reform in Argentina

    International Nuclear Information System (INIS)

    Diaz de Hasson, G.

    1995-01-01

    After a brief description of the speedy transformation carried out in the organization and regulation of the electricity sector, based on the segmentation of the industry and on the promotion of competition, an analysis is made of the implications and results of the new rules of the game over the system's future. This analysis reflects, apart from the author's opinion, the visions and expectations of the actors over the difficulties in setting up competitive markets and their influence over decision making criteria, in an industry characterized by a long term perspective. (author). 5 refs

  8. Measurement of electric potential distribution in dielectrics

    Energy Technology Data Exchange (ETDEWEB)

    Veretel' nik, V I; Dergozubov, K A; Evdokimov, O B; Shevelev, G E [Tomskij Politekhnicheskij Inst. (USSR). Nauchno-Issledovatel' skij Inst. Ehlektronnoj Introskopii

    1976-05-01

    A radiation method of potential probing in a substance is described. The method is based upon the influence of the electric field upon the emission of secondary electrons expelled by ..gamma..-irradiation from the studied sample.

  9. Magnetic resonance electrical impedance tomography for determining electric field distribution during electroporation

    International Nuclear Information System (INIS)

    Kranjc, Matej; Miklavcic, Damijan; Bajd, Franci; Serša, Igor

    2013-01-01

    Electroporation is a phenomenon caused by externally applied electric field to cells that results in an increase of cell membrane permeability to various molecules. Accurate coverage of the tissue with a sufficiently large electric field presents one of the most important conditions for successful membrane permeabilization. Applications based on electroporation would greatly benefit with a method for monitoring the electric field, especially if it could be done in situ. As the membrane electroporation is a consequence of an induced transmembrane potential, which is directly proportional to the local electric field, we have been investigating current density imaging and magnetic resonance electrical impedance tomography techniques to determine the electric field distribution during electroporation. In this paper, we present comparison of current density and electric field distribution in an agar phantom and in a liver tissue exposed to electroporation pulses. As expected, a region of increased electrical conductivity was observed in the liver tissue exposed to sufficiently high electric field but not in agar phantom.

  10. European industrial policy with regard to photovoltaic electricity

    International Nuclear Information System (INIS)

    Dambrine, Fabrice

    2013-01-01

    The production of photovoltaic electricity has increased considerably over the last decade, especially in Europe and particularly in Germany and Italy, owing to the stimulus imparted by the advantageous rates for purchasing this electricity and by the steadily decreasing price of photovoltaic modules. This growth will continue in countries with intense sunshine and in areas that lack interconnected grids or where production is maximal during demand peaks caused by air-conditioning. Growth will also continue in the industrialized countries that want to re-balance their energy mix and break out of their heavy dependence on fossil fuels and nuclear power. In 2011, installations for generating nearly 30 GWc of solar photovoltaic power were set up around the world; and total power from this source at the end of 2011 was nearly 70 GWc, and could reach 300 GWc in 2020. This raises questions about how to develop industries for satisfying this demand

  11. Electric power industry restructuring in Australia: Lessons from down-under. Occasional paper No. 20

    Energy Technology Data Exchange (ETDEWEB)

    Ray, D. [Univ. of Wisconsin, Madison, WI (United States)

    1997-01-01

    Australia`s electric power industry (EPI) is undergoing major restructuring. This restructuring includes commercialization of state-owned electric organization through privatization and through corporatization into separate governmental business units; structural unbundling of generation, transmission, retailing, and distribution; and creation of a National Electricity Market (NEM) organized as a centralized, market-based trading pool for buying and selling electricity. The principal rationales for change in the EPI were the related needs of enhancing international competitiveness, improving productivity, and lowering electric rates. Reducing public debt through privatization also played an important role. Reforms in the EPI are part of the overall economic reform package that is being implemented in Australia. Enhancing efficiency in the economy through competition is a key objective of the reforms. As the need for reform was being discussed in the early 1990s, Australia`s previous prime minister, Paul Keating, observed that {open_quotes}the engine which drives efficiency is free and open competition.{close_quotes} The optimism about the economic benefits of the full package of reforms across the different sectors of the economy, including the electricity industry, is reflected in estimated benefits of a 5.5 percent annual increase in real gross domestic product and the creation of 30,000 more jobs. The largest source of the benefits (estimated at 25 percent of total benefits) was projected to come from reform of the electricity and gas sectors.

  12. The greening of European electricity industry: A battle of modernities

    International Nuclear Information System (INIS)

    Midttun, Atle

    2012-01-01

    Europe has played the role of a green hegemon on the global arena for several decades. By exploring its green transition in the electricity industry, the article discusses whether Europe is on track with regard to delivering sustainable development in a core sector at home. The article finds that the greening of European electricity industry has been highly dynamic and can best be represented in terms of competing modernities; where carbon, nuclear, renewables and demand side management challenge each other in the race for sustainable energy solutions. The article describes Greening European electricity industry as a complex institutional game which resembles a relay race where various factors have driven innovation at different stages. Change may be initially have been politically driven, while the baton is later taken by markets, technology or civic mobilization. The article shows how strong greening policies may lead to blockage, whereas softer and less confrontational policies with triggering effects may have a better chance of success. The article also argues that a central factor in the apparent European success in greening electricity has been an advantageous blend of technology push and market pull approaches, which has merged out of national rivalry rather than coordinated planning. - Highlights: ► European el-industry has met the climate challenge with four rivaling modernities. ► They are carbon modernity, nuclear modernity, supply and demand side ecomodernity. ► Europe has successfully facilitated green transition through three channels. ► They are green radicalism, institutional pluralism and multiple policy instruments. ► Europe has been a front-runner, but faces challenges mainstreaming sustainability.

  13. Production in Italian industry: Electric power demand indicators

    International Nuclear Information System (INIS)

    Ajello, V.

    1993-01-01

    The effects of the recession in Italy were first evidenced during the period spanning 1990-1992 with a sharp drop in the international competitiveness of Italian products. This phase was then followed by a significant drop in internal demand, the devaluation of the Italian Lira and subsequent market uncertainty. This paper presents graphs of national and regional electric power production and consumption figures which reflect the downturn in the viability of the Italian economy, especially in the industrial sector

  14. Transmission and wind investment in a deregulated electricity industry

    DEFF Research Database (Denmark)

    Maurovich-Horvat, Lajos; Boomsma, Trine Krogh; Siddiqui, Afzal S.

    2015-01-01

    Adoption of dispersed renewable energy technologies requires transmission network expansion. Besides the transmission system operator (TSO), restructuring of electricity industries has introduced a merchant investor (MI), who earns congestion rents from constructing new lines. We compare these tw...... proportion of energy is produced by wind. In effect, withholding of generation capacity by producers prompts more transmission investment since the TSO aims to increase welfare by subsidizing wind and the MI creates more flow to maximize profit....

  15. Electricity End Uses, Energy Efficiency, and Distributed Energy Resources Baseline

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wei, Max [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Morrow, William [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Deason, Jeff [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schiller, Steven R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Leventis, Greg [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Smith, Sarah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Leow, Woei Ling [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Levin, Todd [Argonne National Lab. (ANL), Argonne, IL (United States); Plotkin, Steven [Argonne National Lab. (ANL), Argonne, IL (United States); Zhou, Yan [Oak Ridge Inst. for Science and Education (ORISE), Oak Ridge, TN (United States)

    2017-01-01

    This report was developed by a team of analysts at Lawrence Berkeley National Laboratory, with Argonne National Laboratory contributing the transportation section, and is a DOE EPSA product and part of a series of “baseline” reports intended to inform the second installment of the Quadrennial Energy Review (QER 1.2). QER 1.2 provides a comprehensive review of the nation’s electricity system and cover the current state and key trends related to the electricity system, including generation, transmission, distribution, grid operations and planning, and end use. The baseline reports provide an overview of elements of the electricity system. This report focuses on end uses, electricity consumption, electric energy efficiency, distributed energy resources (DERs) (such as demand response, distributed generation, and distributed storage), and evaluation, measurement, and verification (EM&V) methods for energy efficiency and DERs.

  16. NUMERICAL COMPUTATION AND PREDICTION OF ELECTRICITY CONSUMPTION IN TOBACCO INDUSTRY

    Directory of Open Access Journals (Sweden)

    Mirjana Laković

    2017-12-01

    Full Text Available Electricity is a key energy source in each country and an important condition for economic development. It is necessary to use modern methods and tools to predict energy consumption for different types of systems and weather conditions. In every industrial plant, electricity consumption presents one of the greatest operating costs. Monitoring and forecasting of this parameter provide the opportunity to rationalize the use of electricity and thus significantly reduce the costs. The paper proposes the prediction of energy consumption by a new time-series model. This involves time series models using a set of previously collected data to predict the future load. The most commonly used linear time series models are the AR (Autoregressive Model, MA (Moving Average and ARMA (Autoregressive Moving Average Model. The AR model is used in this paper. Using the AR (Autoregressive Model model, the Monte Carlo simulation method is utilized for predicting and analyzing the energy consumption change in the considered tobacco industrial plant. One of the main parts of the AR model is a seasonal pattern that takes into account the climatic conditions for a given geographical area. This part of the model was delineated by the Fourier transform and was used with the aim of avoiding the model complexity. As an example, the numerical results were performed for tobacco production in one industrial plant. A probabilistic range of input values is used to determine the future probabilistic level of energy consumption.

  17. The future of the electric utility industry in Canada

    International Nuclear Information System (INIS)

    Threlkeld, R.

    1995-01-01

    A discussion of future changes in the electric power utility industry in Canada was presented. The impacts of deregulation were considered, including increased competition, and reduced profits resulting from it. Restructuring measures taken by BC Hydro to prepare for industry changes were described. Competition was not only expected to result from new electric utilities, but also gas utilities that are establishing themselves in the home heating business. Emphasis was placed on making the utilities' priorities, the same as their customers'. Flexibility of rate scheduling and increased dependence on customer-owned generation were needed to remain competitive. Exportation of surplus electricity and development of power utilities in developing nations was considered as a potentially lucrative development strategy. It was suggested that making use of strategic alliances within Canada and worldwide, will help to keep utilities ahead of the competition. A warning was issued to the effect that environmental concerns must always be considered well in advance of regulations since they are continually becoming more stringent. Making common cause with customers, and continuous improvement were considered to be the most important keys to future success for the industry

  18. Decomposing the variation of aggregate electricity intensity in Spanish industry

    International Nuclear Information System (INIS)

    Gonzalez, P.F.; Suarez, R.P.

    2003-01-01

    Several papers have dealt with methodological and application issues related to techniques for decomposing changes in environmental indicators. This paper aims to decompose changes in electricity intensity in Spanish industry and to explain the factors that contribute to these changes. Focusing on an energy intensity approach based on Divisia indices, we began by reviewing the two general parametric Divisia methods and six specific cases. In order to avoid obtaining significantly different results by using differing methods, all of them have been applied to Spanish data. Also two different disaggregation levels have been taken into consideration. Combined with electricity price analysis, the results of this paper indicate the poor contribution of structural change to substantial reductions in aggregate electricity intensity, and underline the role of innovation, development, diffusion and access to more efficient technologies as main contributors to the reduction of the energy/production ratio. (author)

  19. Effects of regulatory reforms in the electricity supply industry on electricity prices in developing countries

    International Nuclear Information System (INIS)

    Nagayama, Hiroaki

    2007-01-01

    Electric power sector reforms in the electricity supply industry have had an impact on industrial and household prices in developing countries in Latin America, the former Soviet Union, and Eastern Europe. Using original panel data for 83 countries during the period from 1985 to 2002, we examine how each policy instrument of the reform measures influenced electricity prices for countries in the above regions. We found that variables such as entry of independent power producers (IPP), unbundling of generation and transmission, establishment of a regulatory agency, and the introduction of a wholesale spot market have had a variety of impacts on electricity prices, some of which were not always consistent with expected results. The research findings suggest that neither unbundling nor introduction of a wholesale pool market on their own necessarily reduces the electric power price. In fact, contrary to expectations, there was a tendency for the price to rise. However, coexistent with an independent regulator, unbundling may work to reduce electricity prices. Privatization and the introduction of foreign IPP and retail competition lower electricity prices in some regions, but not all

  20. The electricity supply industry as a subject for public criticism

    International Nuclear Information System (INIS)

    Bartsch, R.

    1977-01-01

    The German electricity supply industry is becoming the subject for more public criticism although it has supplied the whole population and industry in recent years with electricity without limitations and at a favourable price. In spite of the satisfactory and exemplary achievements of this branch of the economy a wave of criticism has built up, caused by the increase in nuclear power station construction, and this is assuming greater proportions and includes wider fields. This situation requires a matching publicity campaign in a number of directions which must be preceded by comprehensive research into causes. It is urgently necessary to achieve a realisation of the basic questions in this branch of the economy in all those, engaged in electricity supply. Full information on the special physical characteristics of the electricity produced, with all the consequences which follow from these, must be supplied to the relevant groups in society both within and outside the economy and also to the mass media, together with continuous efforts to gain the trust of the public. (orig.) [de

  1. Regulation and competition in United Kingdom electricity and gas industries

    International Nuclear Information System (INIS)

    McGowan, F.

    1992-01-01

    Focussing on the role of regulation in developing competition, this paper reviews the development of a regulation system to monitor and control prices, as well as, quality of service, in the UK's recently privatized electricity and gas industries. The review covers: the control mechanisms applied to the natural gas tariff and contract markets in the area of common carriage; performance monitoring and the concept of yardstick competition in the electric power industry; and the management and control, by OFFER (Office of Electricity Regulation), of the total 'pool' of generated electricity. It is noted that whereas Great Britain's particular energy supply situation permits this nation to attempt privatization/competition regulation, the energy balances of other European countries make similar attempts, for them, risky. The UK experience with privatization/competition regulation so far has shown that regulation is indispensable in guaranteeing competition, and that the incorporation of the controlling board within the framework of anti-trust legislation and the granting of full autonomy to this board has greatly favoured its effectiveness

  2. Investment and deregulation in the electricity generation industry

    International Nuclear Information System (INIS)

    Peluchon, B.

    2007-12-01

    This work addresses the issue of investment in the electricity generation industry. As the analysis of many crisis which have affected electricity markets shows, there is a systematic under-investment in peak capacity. Electricity prices are not high enough to cover fixed costs of such generators, a phenomenon that has been dubbed 'missing money' in some recent papers (Stoft). The investment decisions of a duo-poly facing random demand are then compared to those of a public monopoly. The results are that no prices may be high enough to solve the 'missing money' problem, since the duo-poly is able to exercise market power in order to maximize his profit. This results systematically in fewer peak capacity in the duo-poly case than in the public monopoly case. This remains true in the case of a n-oligopoly. The necessity of designing a mechanism remunerating capacity is thus demonstrated. Capacity markets are then analysed in the light of those results. What appears is that operating reserves are a public good and, as such, prevents capacity markets to solve the 'missing money' problem. This casts a shadow on the pursuit of deregulation in the electricity industry. (author)

  3. The impact of electricity restructuring on the natural gas industry

    International Nuclear Information System (INIS)

    Given, G.

    1999-03-01

    The main objective of the study is to quantify the impact of electrical restructuring on the natural gas industry, in particular the expected rise in natural gas consumption for electricity generation in Canada from 2000 to 2020. To this end, the study estimates how large the demand potential is and where it is likely to materialize, with the timing of these events also considered. Chapter two discusses the study methodology, which is that of a quantitative forecast. Before an analytical model was chosen, a careful review of potential candidates, a literature review, and an analysis of important issues were undertaken. Chapter three provides requisite background information of electricity restructuring issues. U.K. experiences are highlighted, and common issues and differences among states and provinces are discussed also. Chapter four provides some necessary historical background and puts into perspective the importance of gas consumption for electric generation. Also treated are relevant Canadian and U.S. generation and capacity, and forecasts of restructuring impacts from other organizations. Whether a consensus forecast for gas demand exists is examined, as well as a number of critical factors examined in various studies. Chapter five describes the development of individual study scenarios and key assumptions contained in each scenario. Also described are some of the selected model's capabilities. Retail and generation company strategy parameters are highlighted to provide a better understanding of those capabilities. The competition parameters chosen for generators and retail companies in the model are described. Chapter six reports all key forecast variables in a discussion which compares relevant scenario and sensitivity forecast results. Detailed forecast results for two scenarios are provided in appendices. Chapter seven discusses new investment and business opportunities and challenges in light of the forecast results. These are reviewed for a number of

  4. Estimation of the diameter-charge distribution in polydisperse electrically charged sprays of electrically insulating liquids

    Science.gov (United States)

    Rigit, A. R. H.; Shrimpton, John S.

    2009-06-01

    The majority of scientific and industrial electrical spray applications make use of sprays that contain a range of drop diameters. Indirect evidence suggests the mean drop diameter and the mean drop charge level are usually correlated. In addition, within each drop diameter class there is every reason to suspect a distribution of charge levels exist for a particular drop diameter class. This paper presents an experimental method that uses the joint PDF of drop velocity and diameter, obtained from phase Doppler anemometry measurements, and directly obtained spatially resolved distributions of the mass and charge flux to obtain a drop diameter and charge frequency distribution. The method is demonstrated using several data-sets obtained from experimental measurements of steady poly-disperse sprays of an electrically insulating liquid produced with the charge injection technique. The space charge repulsion in the spray plume produces a hollow cone spray structure. In addition an approximate self-similarity is observed, with the maximum radial mass and charge flow occurring at r/ d ~ 200. The charge flux profile is slightly offset from the mass flux profile, and this gives direct evidence that the spray specific charge increases from approximately 20% of the bulk mean spray specific charge on the spray axis to approximately 200% of the bulk mean specific charge in the periphery of the spray. The results from the drop charge estimation model suggest a complex picture of the correlation between drop charge and drop diameter, with spray specific charge, injection velocity and orifice diameter all contributing to the shape of the drop diameter-charge distribution. Mean drop charge as a function of the Rayleigh limit is approximately 0.2, and is invariant with drop diameter and also across the spray cases tested.

  5. Estimation of the diameter-charge distribution in polydisperse electrically charged sprays of electrically insulating liquids

    Energy Technology Data Exchange (ETDEWEB)

    Rigit, A.R.H. [University of Sarawak, Faculty of Engineering, Kota Samarahan, Sarawak (Malaysia); Shrimpton, John S. [University of Southampton, Energy Technology Research Group, School of Engineering Sciences, Southampton (United Kingdom)

    2009-06-15

    The majority of scientific and industrial electrical spray applications make use of sprays that contain a range of drop diameters. Indirect evidence suggests the mean drop diameter and the mean drop charge level are usually correlated. In addition, within each drop diameter class there is every reason to suspect a distribution of charge levels exist for a particular drop diameter class. This paper presents an experimental method that uses the joint PDF of drop velocity and diameter, obtained from phase Doppler anemometry measurements, and directly obtained spatially resolved distributions of the mass and charge flux to obtain a drop diameter and charge frequency distribution. The method is demonstrated using several data-sets obtained from experimental measurements of steady poly-disperse sprays of an electrically insulating liquid produced with the charge injection technique. The space charge repulsion in the spray plume produces a hollow cone spray structure. In addition an approximate self-similarity is observed, with the maximum radial mass and charge flow occurring at r/d{proportional_to}200. The charge flux profile is slightly offset from the mass flux profile, and this gives direct evidence that the spray specific charge increases from approximately 20% of the bulk mean spray specific charge on the spray axis to approximately 200% of the bulk mean specific charge in the periphery of the spray. The results from the drop charge estimation model suggest a complex picture of the correlation between drop charge and drop diameter, with spray specific charge, injection velocity and orifice diameter all contributing to the shape of the drop diameter-charge distribution. Mean drop charge as a function of the Rayleigh limit is approximately 0.2, and is invariant with drop diameter and also across the spray cases tested. (orig.)

  6. Electric utility strategies and the emerging industry structure - Part 1

    International Nuclear Information System (INIS)

    Motupalli, S.

    1991-01-01

    The electric utility industry is our most capital intensive industry by far. Over the past few decades, socioeconomic and technological forces have been quietly revolutionizing the way the industry conducts itself. During the 1980s, these changes have been particularly intense, often catching both regulators and regulated ill-prepared to develop effective and profitable strategies to deal with such change. Much has already been written about these changes: independent power producers, competitive procurement of resources, incentive-based regulation, the benefits of affiliated company structures, mergers and consolidation, customer energy conservation, and marketing strategy development are all currently highly popular article and seminar topics. The author's object in this two-part series is to facilitate development of a decision framework to put these various changes in perspective, to help develop effective strategies through better focused and equipped planning methodologies. Gaining an understanding of the role, strengths and weaknesses of the various players in an industry and the structural constraints in which they operate is a necessary precursor to developing effective operating strategies to deal with change or to manipulate industry forces in your favor. Michael Port's popular five forces model provides a convenient way to develop such an understanding. It provides a way to map the industry forces driving profitability, through a review of the strengths, weaknesses and leverage of: current industry players, suppliers to the industry, customers for the industry's product, new entrants into the market, and substitute products providing equal or better value. Part 1 of this series reviews each of these five forces along some key dimensions to determine their direction of change or influence, and whether this change impacts a utility's competitive position favorably or unfavorably

  7. Proceedings of the 1992 DOE-industry thermal distribution conference

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, J.W. (ed.)

    1992-06-01

    The subject of the conference was thermal distribution in small buildings. Thermal distribution systems are the ductwork, piping, or other means used to transport heat or cooling effect from the equipment in which the heat or cooling is produced to the building spaces in which it is used. The small buildings category is defined to include single-family residential and multifamily and commercial buildings with less than 10,000 ft{sup 2} floor area. The 1992 DOE-Industry Thermal Distribution Conference was conceived as the beginning of a process of information transfer between the DOE and the industries having a stake in thermal distribution systems, whereby the DOE can make the industry aware of its thinking and planned directions early enough for changes to be made, and whereby the industries represented can provide this input to the DOE on a timely and informed basis. In accordance with this, the objectives of the Conference were: To present--to a representative group of researchers and industry representative--the current industry thinking and DOE's current directions for research in small-building thermal distribution. To obtain from industry and the research community a critique of the DOE priorities and additional ideas concerning how DOE can best assist the industry in promoting energy conservation in thermal distribution systems.

  8. Proceedings of the 1992 DOE-industry thermal distribution conference

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, J.W. [ed.

    1992-06-01

    The subject of the conference was thermal distribution in small buildings. Thermal distribution systems are the ductwork, piping, or other means used to transport heat or cooling effect from the equipment in which the heat or cooling is produced to the building spaces in which it is used. The small buildings category is defined to include single-family residential and multifamily and commercial buildings with less than 10,000 ft{sup 2} floor area. The 1992 DOE-Industry Thermal Distribution Conference was conceived as the beginning of a process of information transfer between the DOE and the industries having a stake in thermal distribution systems, whereby the DOE can make the industry aware of its thinking and planned directions early enough for changes to be made, and whereby the industries represented can provide this input to the DOE on a timely and informed basis. In accordance with this, the objectives of the Conference were: To present--to a representative group of researchers and industry representative--the current industry thinking and DOE`s current directions for research in small-building thermal distribution. To obtain from industry and the research community a critique of the DOE priorities and additional ideas concerning how DOE can best assist the industry in promoting energy conservation in thermal distribution systems.

  9. Risk Reduction Methods for Managing the Development of Regional Electric Power Industry

    Directory of Open Access Journals (Sweden)

    Mikhail Kozhevnikov

    2017-11-01

    Full Text Available The development of the regional electric power industry has come to the forefront due to the changing scale, quality, and configuration of electric power infrastructure, and the spread of distributed generation. This gives rise to more stringent requirements regarding the reliability, safety, and environmental impact of electric power supply. This article aims to justify a package of methods that make it possible to identify and minimize investment, production, financial, and environmental risks in order to ensure sustainable development of the regional electric power industry that performs anti-crisis functions, and of individual energy companies. The key method to be employed is integrated resource planning (IRP. As a part of the method, energy conservation, renewable energy sources, and combined heat and power production are considered as equally valid ways of meeting future demand. The authors have designed a methodology for taking into account uncertainty and risk when implementing IRP. The methodology includes analysis of scenarios and decision making processes by calculating past and projected values of profit indicators. When conducting the environmental and economic assessment of an investment project in the electric power industry, the authors suggest using an aggregate indicator of environmental and economic effectiveness that is calculated on the basis of a combination of locally significant positive and negative environmental and economic impacts of the project. The authors formulate conceptual provisions that serve as the foundation for a promising model of the regional electric power industry and which contain recommendations for managing the development of the industry while minimizing organizational, market, and technological risks.

  10. Distributional incidence of green electricity price subsidies in China

    International Nuclear Information System (INIS)

    Wang, Feng; Zhang, Bing

    2016-01-01

    Distributional incidences are fundamental to environmental and energy policies, a condition that has led to controversies on the equity of environmental and energy policy. Using data from China's Urban Household Income and Expenditure Survey data from 2007, this study quantified the distributional effects of the green electricity price subsidy policy among Chinese urban household and compared its effects by using lifetime income and annual income to classify households, respectively. The results show that total electricity subsidies are mainly driven by indirect electricity subsidies. By using lifetime income to classify households, subsidies to households in the poorest two groups accounted for less than 10.2% of the total subsidies, whereas money distributed to households in the top two deciles reached 35.4%. The comparison using annual income to group households also demonstrated the similar impact of the green electricity price subsidy policy. China’s future market reforms should allow electricity prices to reflect pollution abatement costs. Additionally, a multi-step block electricity price schedule can reduce the regressivity of the policy. - Highlights: • We quantified the distributional effects of the green electricity price subsidy. • The distributional effects of different income groups were compared. • The poorest two groups accounted for less than 10.2% of the total subsidies. • The green electricity price subsidy policy benefited the rich at household level.

  11. Ethics on the TEPCO bankruptcy, nuclear power plants and regulatory reform in the electric power industry

    International Nuclear Information System (INIS)

    Koga, Shigeaki

    2013-01-01

    Although regulatory reform in the electric power industry had been considered as part of social system reform like in the finance and communications to liberalize the market, there still continued to exist regional monopoly, integrated system for power generation, transmission and distribution, and lack of competition. The Fukushima accident showed such electric power system was unethical as social system compared to ordinary industries, because electric power company getting profit could not be prepared for nuclear damage liability and would burden third unrelated parties with risk. Electric power company should be forced to insure nuclear power plants for nuclear accidents. Otherwise restart of nuclear power plant operation should not be allowed. Nuclear power had been justified to be entitled grant or subsidy from the government for public good, which would be unfair to people. This article presented speeding-up scheme of Fukushima accident treatment leading to TEPCO bankruptcy and discussed measures against concerns or comments about bankruptcy procedures, major part of which might be mitigation of fund-raising fear by government support. At the proceeding of bankruptcy procedure including spinning off of separate companies, regulatory reform in the electric power industry could be taken in advanced. (T. Tanaka)

  12. The electric power engineering handbook electric power generation, transmission, and distribution

    CERN Document Server

    Grigsby, Leonard L

    2012-01-01

    Featuring contributions from worldwide leaders in the field, the carefully crafted Electric Power Generation, Transmission, and Distribution, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) provides convenient access to detailed information on a diverse array of power engineering topics. Updates to nearly every chapter keep this book at the forefront of developments in modern power systems, reflecting international standards, practices, and technologies. Topics covered include: * Electric Power Generation: Nonconventional Methods * Electric Power Generation

  13. Research and technology management in the electricity industry methods, tools and case studies

    CERN Document Server

    Daim, Tugrul; Kim, Jisun

    2013-01-01

    Technologies such as renewable energy alternatives including wind, solar and biomass, storage technologies and electric engines are creating a different landscape for the  electricity industry. Using sources and ideas from technologies such as renewable energy alternatives, Research and Technology Management in the Electricity Industry explores a different landscape for this industry and applies it to the electric industry supported by real industry cases. Divided into three sections, Research and Technology Management in the Electricity Industry introduces a range of  methods and tools includ

  14. Network governance in electricity distribution: Public utility or commodity

    International Nuclear Information System (INIS)

    Kuenneke, Rolf; Fens, Theo

    2005-01-01

    This paper addresses the question whether the operation and management of electricity distribution networks in a liberalized market environment evolves into a market driven commodity business or might be perceived as a genuine public utility task. A framework is developed to classify and compare different institutional arrangements according to the public utility model and the commodity model. These models are exemplified for the case of the Dutch electricity sector. It appears that the institutional organization of electricity distribution networks is at the crossroads of two very different institutional development paths. They develop towards commercial business if the system characteristics of the electricity sector remain basically unchanged to the traditional situation. If however innovative technological developments allow for a decentralization and decomposition of the electricity system, distribution networks might be operated as public utilities while other energy services are exploited commercially. (Author)

  15. Auction development for the price-based electric power industry

    Science.gov (United States)

    Dekrajangpetch, Somgiat

    The restructuring of the electric power industry is to move away from the cost-based monopolistic environment of the past to the priced-based competitive environment. As the electric power industry is restructuring in many places, there are still many problems that need to be solved. The work in this dissertation contributes to solve some of the electric power auction problems. The majority of this work is aimed to help develop good markets. A LaGrangian relaxation (LR) Centralized Daily Commitment Auction (CDCA) has been implemented. It has been shown that the solution might not be optimal nor fair to some generation companies (GENCOs) when identical or similar generating units participate in a LR CDCA based auction. Supporting information for bidding strategies on how to change unit data to enhance the chances of bid acceptance has been developed. The majority of this work is based on Single Period Commodity Auction (SPCA). Alternative structures for the SPCA are outlined. Whether the optimal solution is degenerated is investigated. Good pricing criteria are summarized and the pricing method following good pricing criteria is developed. Electricity is generally considered as a homogeneous product. When availability level is used as additional characteristic to distinct electricity, electricity can be considered a heterogeneous product. The procedure to trade electricity as a heterogeneous product is developed. The SPCA is formulated as a linear program. The basic IPLP algorithm has been extended so that sensitivity analysis can be performed as in the simplex method. Sensitivity analysis is used to determine market reach. Additionally, sensitivity analysis is used in combination with the investigation of historical auction results to provide raw data for power system expansion. Market power is a critical issue in electric power deregulation. Firms with market power have an advantage over other competitor firms in terms of market reach. Various approaches to

  16. Emissions trading and innovation in the German electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    Cames, Martin

    2010-07-01

    One major objective of the introduction of emissions trading in the European Union was to promote innovation towards mitigating climate change. Focusing on the German electricity industry, the extent to which this objective has been achieved up to now and how the design of the trading scheme could be improved towards achieving the intended objective shall be analyzed in this thesis. These questions are tackled in the thesis from a theoretical and an empirical perspective. The theoretical analysis was largely based on neoclassical environmental economics by using an algebraic model which allowed for comparison of the relevant companies' profits under various configurations of the analyzed design options. The empirical analysis was grounded on two surveys of the electricity industry - one before the start of emissions trading, the other after two and a half years of experience - which enabled identification of the concrete changes in the companies' perceptions and attitudes towards innovation due to the introduction of emissions trading. The analysis reveals some indications that the instrument has basically functioned as originally intended although it has certainly not yet developed its full potential in terms of promoting innovation towards a more climate friendly electricity system. From an environmental innovation perspective the following improvements are essential: (1) Closure provisions should be abolished as soon as possible because they basically extend the lifetime of old installations and thus rather delay innovation. (2) Fuel-specific allocation to new entrants should also be abandoned since it eliminates - at least partly - the incentives to shift investments towards technologies which use more carbon friendly fuels such as natural gas or biomass. (3) Introducing full auctioning for the electricity industry would remedy both of the above-mentioned weaknesses and at the same time eliminate the windfall profit generated by free allocation of allowances

  17. Emissions trading and innovation in the German electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    Cames, Martin

    2010-07-01

    One major objective of the introduction of emissions trading in the European Union was to promote innovation towards mitigating climate change. Focusing on the German electricity industry, the extent to which this objective has been achieved up to now and how the design of the trading scheme could be improved towards achieving the intended objective shall be analyzed in this thesis. These questions are tackled in the thesis from a theoretical and an empirical perspective. The theoretical analysis was largely based on neoclassical environmental economics by using an algebraic model which allowed for comparison of the relevant companies' profits under various configurations of the analyzed design options. The empirical analysis was grounded on two surveys of the electricity industry - one before the start of emissions trading, the other after two and a half years of experience - which enabled identification of the concrete changes in the companies' perceptions and attitudes towards innovation due to the introduction of emissions trading. The analysis reveals some indications that the instrument has basically functioned as originally intended although it has certainly not yet developed its full potential in terms of promoting innovation towards a more climate friendly electricity system. From an environmental innovation perspective the following improvements are essential: (1) Closure provisions should be abolished as soon as possible because they basically extend the lifetime of old installations and thus rather delay innovation. (2) Fuel-specific allocation to new entrants should also be abandoned since it eliminates - at least partly - the incentives to shift investments towards technologies which use more carbon friendly fuels such as natural gas or biomass. (3) Introducing full auctioning for the electricity industry would remedy both of the above-mentioned weaknesses and at the same time eliminate the windfall profit generated by free allocation of

  18. Modeling and optimization of an electric power distribution network ...

    African Journals Online (AJOL)

    Modeling and optimization of an electric power distribution network planning system using ... of the network was modelled with non-linear mathematical expressions. ... given feasible locations, re-conductoring of existing feeders in the network, ...

  19. Leading Edge Asynchronous Propeller (LEAPTech) Distributed Electric Propulsion (DEP) Concept

    Data.gov (United States)

    National Aeronautics and Space Administration — The "Semi-Tandem Electric Distributed Wing Zip Aviation Advanced Concept Project" was renamed to LEAPTech DEP to better align with the content of the work. This...

  20. Air pollution effects due to deregulation of the electric industry

    Science.gov (United States)

    Davoodi, Khojasteh Riaz

    The Energy Policy Act of 1992 introduced the concept of open-access into the electric utility industry which allows privately-owned utilities to transmit power produced by non-utility generators and independent power producers (IPPs). In April 1996, the Federal Energy Regulatory Commission (FERC) laid down the final rules (Orders No. 888 & No. 889), which required utilities to open their transmission lines to any power producer and charge them no more than what they pay for the use of their own lines. These rules set the stage for the retail sale of electricity to industrial, commercial and residential utility customers; non-utility generators (Nugs); and power marketers. These statutory, regulatory and administrative changes create for the electric utility industry two different forces that contradict each other. The first is the concept of competition among utility companies; this places a greater emphasis on electric power generation cost control and affects generation/fuel mix selection and demand side management (DSM) activities. The second force, which is converse to the first, is that utilities are major contributors to the air pollution burden in the United States and environmental concerns are forcing them to reduce emissions of air pollutants by using more environmentally friendly fuels and implementing energy saving programs. This study evaluates the impact of deregulation within the investor owned electric utilities and how this deregulation effects air quality by investigating the trend in demand side management programs and generation/fuel mix. A survey was conducted of investor owned utilities and independent power producers. The results of the survey were analyzed by analysis of variance and regression analysis to determine the impact to Air Pollution. An air Quality Impact model was also developed in this study. This model consists of six modules: (1) demand side management and (2) consumption of coal, (3) gas, (4) renewable, (5) oil and (6

  1. Industrial Use of Distributed Generation in Real-Time Energy and Ancillary Service Markets

    Energy Technology Data Exchange (ETDEWEB)

    Hudson, C.R.

    2001-10-24

    Industrial consumers of energy now have the opportunity to participate directly in electricity generation. This report seeks to give the reader (1) insights into the various types of generation services that distributed generation (DG) units could provide, (2) a mechanism to evaluate the economics of using DG, (3) an overview of the status of DG deployment in selected states, and (4) a summary of the communication technologies involved with DG and what testing activities are needed to encourage industrial application of DG. Section 1 provides details on electricity markets and the types of services that can be offered. Subsequent sections in the report address the technical requirements for participating in such markets, the economic decision process that an industrial energy user should go through in evaluating distributed generation, the status of current deployment efforts, and the requirements for test-bed or field demonstration projects.

  2. Industrial Use of Distributed Generation in Real-Time Energy and Ancillary Service Markets; TOPICAL

    International Nuclear Information System (INIS)

    Hudson, C.R.

    2001-01-01

    Industrial consumers of energy now have the opportunity to participate directly in electricity generation. This report seeks to give the reader (1) insights into the various types of generation services that distributed generation (DG) units could provide, (2) a mechanism to evaluate the economics of using DG, (3) an overview of the status of DG deployment in selected states, and (4) a summary of the communication technologies involved with DG and what testing activities are needed to encourage industrial application of DG. Section 1 provides details on electricity markets and the types of services that can be offered. Subsequent sections in the report address the technical requirements for participating in such markets, the economic decision process that an industrial energy user should go through in evaluating distributed generation, the status of current deployment efforts, and the requirements for test-bed or field demonstration projects

  3. Electricity distribution management Smart Grid system model

    Directory of Open Access Journals (Sweden)

    Wiesław Nowak

    2012-06-01

    Full Text Available This paper presents issues concerning the implementation of Smart Grid solutions in a real distribution network. The main components possible to quick implementation were presented. Realization of these ideas should bring tangible benefi ts to both customers and distribution system operators. Moreover the paper shows selected research results which examine proposed solutions in area of improving supply reliability and reducing energy losses in analysed network.

  4. Deregulation and restructuring of the electric utility industry

    Energy Technology Data Exchange (ETDEWEB)

    Nixon, Hal [Utility Workers Union of America (UWUA), AFL-CIO, (United States)

    1997-12-31

    Federal and state policy makers are currently faced with the rapidly evolving issue of the restructuring and potential deregulation of the electric utility industry, a sector of the economy of huge importance through its sheer size and its impact on the daily life and livelihood of everyone. This paper describes eleven principles that must be adhered to in any restructuring of the electric industry. Adherence to the principle and positions outlined can help assure that the transition in this industry benefits all, not just a few, and that the general health and welfare of the people is protected and enhanced [Espanol] Los legisladores estatales y federales se estan enfrentando con el rapido y envolvente aspecto de la reestructuracion y desregulacion potencial de la industria electrica, un sector de la economia de enorme importancia por su tamano y su impacto en la vida diaria y los medios de vida. En esta ponencia se describen once principios y posiciones que deben ser considerados en cualquier reestructuracion de la industria electrica. El apego a los principios y posiciones comentados puede ayudar a asegurar que la transicion en esta industria deneficie a todos, no solo a unos cuantos, y que la salud general y bienestar de la gente sea protegida y mejorada

  5. Dynamics of productivity change in the Australian electricity industry: Assessing the impacts of electricity reform

    Energy Technology Data Exchange (ETDEWEB)

    Aghdam, Reza Fathollahzadeh, E-mail: reza_f_a@yahoo.com [Department of Finance and Economics, College of Industrial Management, King Fahd University of Petroleum and Minerals, PO Box 257, Dhahran 31261 (Saudi Arabia)

    2011-06-15

    The Australian electricity industry has undergone a significant reform, since the mid-1990s. Key changes comprised functional unbundling, market restructuring, regulatory reform, public corporatisation and privatisation. Technological development has been another indisputable constituent of these changes, in the wake of ICT revolution. The principle rationale behind these changes has been that they would improve productivity of the industry and social well-being of people. This paper examines the dynamics of productivity changes in the Australian electricity industry and conducts several hypotheses-testings to identify whether industry's efficiency measures are truly improved as a result of the reform-driven changes. Malmquist Total Factor Productivity Index approach and ANOVA are used for this purpose. The results reveal that the productivity gains in the industry have been largely driven by technological improvements and, to a lesser extent, by reform-induced comparative efficiency gains. On average at national level and for the entire industry, there are efficiency gains that, to large extents, can be attributed to functional unbundling and public corporatisation and, to a lesser extent, to market restructuring and privatisation. The results, however, reveal that the reform-driven changes have made insignificant contribution to comparative efficiency, at the level of thermal generation. - Highlights: > Dynamics of productivity changes in Australian electricity industry are examined. > Several hypotheses are also tested against reform-driven changes. > Technology impact is proved to be far larger than reform-induced impacts. > Unbundling and corporatisation had larger impacts than market restructuring and privatisation. > At thermal generation level, no reform-induced impact is encountered.

  6. Dynamics of productivity change in the Australian electricity industry: Assessing the impacts of electricity reform

    International Nuclear Information System (INIS)

    Aghdam, Reza Fathollahzadeh

    2011-01-01

    The Australian electricity industry has undergone a significant reform, since the mid-1990s. Key changes comprised functional unbundling, market restructuring, regulatory reform, public corporatisation and privatisation. Technological development has been another indisputable constituent of these changes, in the wake of ICT revolution. The principle rationale behind these changes has been that they would improve productivity of the industry and social well-being of people. This paper examines the dynamics of productivity changes in the Australian electricity industry and conducts several hypotheses-testings to identify whether industry's efficiency measures are truly improved as a result of the reform-driven changes. Malmquist Total Factor Productivity Index approach and ANOVA are used for this purpose. The results reveal that the productivity gains in the industry have been largely driven by technological improvements and, to a lesser extent, by reform-induced comparative efficiency gains. On average at national level and for the entire industry, there are efficiency gains that, to large extents, can be attributed to functional unbundling and public corporatisation and, to a lesser extent, to market restructuring and privatisation. The results, however, reveal that the reform-driven changes have made insignificant contribution to comparative efficiency, at the level of thermal generation. - Highlights: → Dynamics of productivity changes in Australian electricity industry are examined. → Several hypotheses are also tested against reform-driven changes. → Technology impact is proved to be far larger than reform-induced impacts. → Unbundling and corporatisation had larger impacts than market restructuring and privatisation. → At thermal generation level, no reform-induced impact is encountered.

  7. Electricity supply industry. Structure, ownership and regulation in OECD countries

    International Nuclear Information System (INIS)

    1994-01-01

    This study surveys developments and implications in the electricity supply industries in OECD countries. Chapter 1 introduces the issues. (Competition or electricity supply for everybody?) Electricity markets are dynamic and the participants are restructuring and repositioning themselves in order to benefit from new opportunities or policy initiatives. These changes are described in chapter 2. Privatisation is being pursued by some governments, not only for reasons of economic efficiency. Arguments for and against privatisation and different ways of introducing it are discussed in chapter 3. Fair trade and competition legislation, as it applies to all corporate entities, creates the institutional framework within which the utility has to operate. Various approaches to regulation and recent developments are described in chapter 4; the implications of regulatory changes are analysed in chapter 5. Having surveyed recent developments and their direct consequences, this study then goes on to look at their broader implications for the achievement of a range of energy policy objectives. Chapter 6 looks at fuel choice and investment decisions. Chapter 7 considers the issue of security of electricity supply, which has many special characteristics for both suppliers and regulators. OECD countries use different approaches for ensuring security of supply. Chapter 8 looks at environmental protection. Chapter 9 looks at energy efficiency. Chapter 10 discusses pricing. The introduction of competition has significant effects: it tends to reduce costs, remove cross subsidies, and bring prices more closely in line with the structure of costs. But there is no clear evidence at this stage as to whether, in the long run, competition produces lower overall prices. Finally chapter 11 analyses risk. The electricity business, like every other business, is faced with a variety of risks that cover every financial and technical facet of electricity production, transport, and supply. (N.C.)

  8. Regional distribution of the metallurgical industry in the Czech Republic

    OpenAIRE

    T. Sadilek

    2017-01-01

    The aim of the article is to present the regional distribution of the metallurgical industry in the Czech Republic and to describe the specific factors which determine the localization of the industry in Czech regions. In order to achieve that goal, traditional tools of regional analysis are used, such as concentration analysis, used in business-to-business marketing, which does not describe the absolute size of the industry, but its relative size, focusing on the relation between the employe...

  9. Industrial distributions of severe occupational injuries among workers in Thailand.

    Science.gov (United States)

    Yamakawa, Michiyo; Sithisarankul, Pornchai; Yorifuji, Takashi; Hengpraprom, Sarunya; Hiransuthikul, Narin; Doi, Hiroyuki; Takao, Soshi

    2014-01-01

    In industrializing countries, occupational safety and health have been affected by globalization. However, a lack of reliable data prevents evaluation of this situation. Therefore, we examined industrial distributions and risks of severe occupational injuries among workers in Thailand, which is one of the few industrializing countries that compiles nationwide data. Data on workers who made claims for occupational injuries from 2007 to 2009 were extracted from the Workmen's Compensation Fund records in Thailand. Among 501,334 claimants, we evaluated the industrial distributions of severe occupational injuries (i.e., permanent disability and death). We then examined the associations between industry and those injuries, using proportionate ratios (PRs) between each industrial category and the overall distribution of occupational injuries. The number of workers in manufacturing making claims for severe occupational injuries was the largest among all industrial categories (319,114/501,334 injuries), although the total number of occupational injuries recently declined. Additionally, workers in manufacturing experienced severe occupational injuries more often compared with the overall distribution of occupational injuries. The PRs (95% confidence interval) for manufacturing were 1.17 (1.14-1.20) in men and 1.33 (1.27-1.38) in women. After adjusting for individual characteristics, the results did not substantially change. Manufacturing seems to have the largest burden of occupational injuries in industrializing countries like Thailand.

  10. An undertaking planning game for the electricity supply industry

    International Nuclear Information System (INIS)

    Troescher, H.

    1977-01-01

    Planning games have been found satisfactory in many field in political and economic life. In particular the more convenient access to electronic calculators has made a contrinution to their wider use. It is therefore surprising that the first planning game which has become known for the electricity supply industry was first published in the year 1975. This is the planning game for the Bernischen Kraftwerke AG, which is based on a simplified model of a small electricity supply undertaking (EVU). This planning game was adapted in the RWE to the conditions in larger EVU and a few additional model components were added. Besides the general points of view on planning games for EVU the author deals with the extended planning game which is termed in the article PEW. (orig.) [de

  11. Transmission and wind investment in a deregulated electricity industry

    DEFF Research Database (Denmark)

    Maurovich-Horvat, Lajos; Boomsma, Trine Krogh; Fleten, Stein-Erik

    2013-01-01

    carrying out investment in wind farms. In this paper, we analyse the interaction between the two conflicting objectives under various assumptions about the electricity market structure and the degree of producers' market power. Via a three-node illustrative example, we show that a merchant investor...... the auspices of a regulated welfare-maximising planner, recent restructuring of electricity industries has introduced a merchant model for transmission investment, which provides congestion rents from construction of a new line. Thus, the merchant investor's incentives are different from those of producers...... typically builds less transmission capacity than a welfare-maximising transmission system operator or central planner. Although social welfare is lower and nodal prices are generally higher with a merchant investor and when producers are assumed to behave à la Cournot, the effect of lower price response...

  12. Distributions of electric and elastic fields at domain boundaries

    International Nuclear Information System (INIS)

    Novak, Josef; Fousek, Jan; Maryska, Jiri; Marvan, Milan

    2005-01-01

    In this paper we describe the application of the finite element method (FEM) in modelling spatial distributions of electric and elastic fields in a ferroelectric crystals with two domains separated by a 90 deg. domain wall. The domain boundary is idealized as a two-dimensional defect in an electro-elastic continuum. It represents the source of inhomogenity and internal distortion in both elastic and electric fields. The main results are distributions of electric field, strain and mechanical force along the domain boundary

  13. Electrical Distribution System Functional Inspection (EDSFI) data base program

    International Nuclear Information System (INIS)

    Gautam, A.

    1993-01-01

    This document describes the organization, installation procedures, and operating instructions for the database computer program containing inspection findings from the US Nuclear Regulatory Commission's (NRC's) Electrical Distribution System Functional Inspections (EDSFIs). The program enables the user to search and sort findings, ascertain trends, and obtain printed reports of the findings. The findings include observations, unresolved issues, or possible deficiencies in the design and implementation of electrical distribution systems in nuclear plants. This database will assist those preparing for electrical inspections, searching for deficiencies in a plant, and determining the corrective actions previously taken for similar deficiencies. This database will be updated as new EDSFIs are completed

  14. Drag Reduction Through Distributed Electric Propulsion

    Science.gov (United States)

    Stoll, Alex M.; Bevirt, JoeBen; Moore, Mark D.; Fredericks, William J.; Borer, Nicholas K.

    2014-01-01

    One promising application of recent advances in electric aircraft propulsion technologies is a blown wing realized through the placement of a number of electric motors driving individual tractor propellers spaced along each wing. This configuration increases the maximum lift coefficient by providing substantially increased dynamic pressure across the wing at low speeds. This allows for a wing sized near the ideal area for maximum range at cruise conditions, imparting the cruise drag and ride quality benefits of this smaller wing size without decreasing takeoff and landing performance. A reference four-seat general aviation aircraft was chosen as an exemplary application case. Idealized momentum theory relations were derived to investigate tradeoffs in various design variables. Navier-Stokes aeropropulsive simulations were performed with various wing and propeller configurations at takeoff and landing conditions to provide insight into the effect of different wing and propeller designs on the realizable effective maximum lift coefficient. Similar analyses were performed at the cruise condition to ensure that drag targets are attainable. Results indicate that this configuration shows great promise to drastically improve the efficiency of small aircraft.

  15. Reliability planning in distributed electric energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Kahn, E.

    1978-10-01

    The goal of this paper is to develop tools for technology evaluation that address questions involving the economics of large-scale systems. The kind of cost discussed usually involves some dynamic aspect of the energy system. In particular, such properties as flexibility, stability, and resilience are features of entire systems. Special attention must be paid to the question of reliability, i.e., availability on demand. The storage problem and the planning for reliability in utility systems are the subjects of this paper. The introductory chapter addresses preliminary definitions--reliability planning, uncertainty, resilience, and other sensitivities. The study focuses on the contrast between conventional power generation technologies with controllable output and intermittent resources such as wind and solar electric conversion devices. The system studied is a stylized representation of California conditions. Significant differences were found in reliability planning requirements (and therefore costs) for systems dominated by central station plants as opposed to those dominated by intermittent resource technologies. It is argued that existing hydroelectric facilities need re-optimization. These plants provide the only currently existing bulk power storage in electric energy systems. 38 references. (MCW)

  16. THE MAIN DIRECTIONS OF IMPROVING THE EFFICIENCY OF PRODUCTION, TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY

    Directory of Open Access Journals (Sweden)

    I. V. Zhezhelenko

    2018-01-01

    Full Text Available The main directions of increase of efficiency of production, transmission and distribution of electric energy have been formulated. The relation between the values of electricity losses during transmission via power grids of different countries and the level of the economies of these countries characterized by the value of gross domestic product at purchasing power parity per capita has been established. In the countries with a gross domestic product at purchasing power parity per capita less than 20 thousand US dollars electricity losses during its transmission via power grids are 1.5–2.5 times more than the ones transmitted via power grids of the industrialized countries where the specified purchasing power parity is in the range of 30.4–54.5 thousand US dollars. In the countries with more developed economies the technical culture of production, transmission and distribution of electricity is higher; the modern control systems of operation modes of electrical networks are used as well as of monitoring and accounting of electricity; also there are solvent and disciplined consumers in such countries as well as clear regulatory framework and tariff regulation system. However, the process of transmission and distribution of electricity is effective if not only low relative losses take place, but the normal (contractual requirements for carrying capacity, quality and reliability of electricity supply are provided. The possibility of analytical determination of the optimum value of reserve capacity of power plants providing the required level of reliability of the power system has been considered.

  17. The Swiss electrical power industry: energy policy problems and prospects

    International Nuclear Information System (INIS)

    Tognola, F.

    1986-01-01

    The emotive consequences of the Chernobyl accident have had a devastating effect on Swiss public opinion and endanger the serious effort by the Swiss electrical power industry over many years at making possible a power supply capable of meeting increasing demand at minimum cost, compatible with security of supply and protection of the environment. It is considered that two new nuclear power stations will be required, one in 1995 and the other in 2000. The serious consequences if these are not built and, particularly, if it were decided to shut down all existing Swiss nuclear stations are stressed. (P.G.R.)

  18. Wind Power in Electrical Distribution Systems

    DEFF Research Database (Denmark)

    Chen, Zhe

    2013-01-01

    Recent years, wind power is experiencing a rapid growth, large number of wind turbines/wind farms have been installed and connected to power systems. In addition to the large centralised wind farms connected to transmission grids, many distributed wind turbines and wind farms are operated as dist...

  19. Electric power industry deregulation in the United States: impacts on U.S. and Canadian markets

    Energy Technology Data Exchange (ETDEWEB)

    Hall, G.R. [Putnam, Hayes and Bartlett, Inc., Cambridge, MA (United States)

    1996-10-01

    An overview of the restructuring and deregulation of the United States electric power industry and the implications for the North American natural gas industry was presented. Electric power restructuring and its effect on wholesale and retail competition was discussed. It was suggested that although in the short term electric power deregulation impacts negatively on the natural gas industry, the long term impacts are favourable. The short term impact on the natural gas industry will mean increased competition and downward pressure on gas prices. In contrast, the long term impact could mean increased reliance on gas for electric power generation and convergence of the electric power and natural gas industries.

  20. Guide to the economic regulation of the electricity industry

    International Nuclear Information System (INIS)

    Brough, M.; Lobban, S.

    1995-09-01

    This document is the fist edition of OXERA's Guide to the Economic Regulation of the Electricity Industry in the UK. It is primarily intended as a work of reference, summarising the key statutory controls of the industry and the most important features of the companies' licences. The main features of the guide are as follows. It provides comprehensive coverage of the institutional and legal framework which defines the regulation of the industry. The roles of the key players are explained and a condensed account of all the relevant legal documents is given. It aims to bring the reader up to date with current regulatory issues and possible developments in the industry. It presents the information in a clear and concise form. The emphasis is on identifying and highlighting the key points in each area so that readers can rapidly familiarise themselves with the subject matter. It does not examine the process by which businesses are valued and the various price caps are set. These are issues which are best approached within the context of utility regulation in general. (author)

  1. Distributional effects of the Australian Renewable Energy Target (RET) through wholesale and retail electricity price impacts

    International Nuclear Information System (INIS)

    Cludius, Johanna; Forrest, Sam; MacGill, Iain

    2014-01-01

    The Australian Renewable Energy Target (RET) has spurred significant investment in renewable electricity generation, notably wind power, over the past decade. This paper considers distributional implications of the RET for different energy users. Using time-series regression, we show that the increasing amount of wind energy has placed considerable downward pressure on wholesale electricity prices through the so-called merit order effect. On the other hand, RET costs are passed on to consumers in the form of retail electricity price premiums. Our findings highlight likely significant redistributive transfers between different energy user classes under current RET arrangements. In particular, some energy-intensive industries are benefiting from lower wholesale electricity prices whilst being largely exempted from contributing to the costs of the scheme. By contrast, many households are paying significant RET pass through costs whilst not necessarily benefiting from lower wholesale prices. A more equitable distribution of RET costs and benefits could be achieved by reviewing the scope and extent of industry exemptions and ensuring that methodologies to estimate wholesale price components in regulated electricity tariffs reflect more closely actual market conditions. More generally, these findings support the growing international appreciation that policy makers need to integrate distributional assessments into policy design and implementation. - Highlights: • The Australian RET has complex yet important distributional impacts on different energy users. • Likely wealth transfers from residential and small business consumers to large energy-intensive industry. • Merit order effects of wind likely overcompensate exempt industry for contribution to RET costs. • RET costs for households could be reduced if merit order effects were adequately passed through. • Need for distributional impact assessments when designing and implementing clean energy policy

  2. Simulation and energy analysis of distributed electric heating system

    Science.gov (United States)

    Yu, Bo; Han, Shenchao; Yang, Yanchun; Liu, Mingyuan

    2018-02-01

    Distributed electric heating system assistssolar heating systemby using air-source heat pump. Air-source heat pump as auxiliary heat sourcecan make up the defects of the conventional solar thermal system can provide a 24 - hour high - efficiency work. It has certain practical value and practical significance to reduce emissions and promote building energy efficiency. Using Polysun software the system is simulated and compared with ordinary electric boiler heating system. The simulation results show that upon energy request, 5844.5kW energy is saved and 3135kg carbon - dioxide emissions are reduced and5844.5 kWhfuel and energy consumption is decreased with distributed electric heating system. Theeffect of conserving energy and reducing emissions using distributed electric heating systemis very obvious.

  3. Evaluation of electric power distribution systems: period 1984/89

    International Nuclear Information System (INIS)

    Britto Filho, W.A. de; Pinto, V.G.

    1992-01-01

    The historical evolution of electric power distribution systems in Brazil, during 1984 to 1989 is described, showing the consumer market with the physical expansion of Distribution Networks and the results of quality from the services made by the companies to their clients. (C.G.C.)

  4. The induced electric field distribution in the solar atmosphere

    International Nuclear Information System (INIS)

    Chen Rong; Yang Zhi-Liang; Deng Yuan-Yong

    2013-01-01

    A method of calculating the induced electric field is presented. The induced electric field in the solar atmosphere is derived by the time variation of the magnetic field when the accumulation of charged particles is neglected. In order to derive the spatial distribution of the magnetic field, several extrapolation methods are introduced. With observational data from the Helioseismic and Magnetic Imager aboard NASA's Solar Dynamics Observatory taken on 2010 May 20, we extrapolate the magnetic field from the photosphere to the upper atmosphere. By calculating the time variation of the magnetic field, we can get the induced electric field. The derived induced electric field can reach a value of 10 2 V cm −1 and the average electric field has a maximum point at the layer 360 km above the photosphere. The Monte Carlo method is used to compute the triple integration of the induced electric field.

  5. Electric power industry restructuring and ROE: The case of Korea Electric Power Corporation

    International Nuclear Information System (INIS)

    Won, Gu-Hwan

    2007-01-01

    Korea's electric power industry was previously run by Korea Electric Power Corporation (KEPCO) in a natural monopoly-type structure. As economy of scale was waning in influence and management effectiveness began to increase in importance, KEPCO was divided into six subsidiaries and faced competition beginning in April 2001. This study evaluates the restructuring process for Korea's power industry and analyzes the financial outcomes based on return on equity (ROE). The results show that the ROE ratio increased. In the analysis period (1993-2004), the financial ratio showed a better performance than that before restructuring. However, productivity ratios such as productivity of capital (or gross value added to total assets) and gross value added to property, plant, and equipment decreased compared to the situation before restructuring. It is believed that the results were due to the increased financial leverage of KEPCO. For this reason, KEPCO should make further efforts to manage its debt in a systematic way

  6. The deregulation of network industries: is the electricity sector an exception?

    International Nuclear Information System (INIS)

    Coppens, F.; Vivet, D.

    2006-01-01

    In view of their special characteristics, network industries have for quite a long time been considered as (natural) monopolies. Network externalities and economies of scale in particular justified this (natural) monopoly thesis. Since the last decade of the past century, however, a trend towards deregulation of such industries has been observed worldwide. This trend started with the successful introduction of competition in the telecommunications sector. The success in that sector is often used as an argument for opening up other network industries to competition as well. The study analyses whether this reasoning can be applied to the electricity sector. At first glance, the sectors electricity and telecommunications seem very similar, as both are network industries having been characterised for a long time by economies of scale, but for which technological progress may have put an end to this scale effect. However, the study points out that there are important differences. In the telecommunications sector, technological progress on the supply side has been accompanied by a strong growth in demand. There is no such demand side effect in the electricity branch. Moreover, due to physical characteristics, the electricity sector seems to be more complicated. In order to introduce competition, the sector has to be split up into sub-sectors (production, transmission, distribution and supply). Only two segments, production and supply, are considered as open markets; transmission and distribution, on the other hand, remain monopolies. This splitting up, however, entails a new kind of costs, the so-called transaction costs. As such the gains from the liberalization in certain segments might (partly) offset increase in the transaction costs resulting from vertical disintegration. (authors)

  7. Strategies for promoting renewables in a new electric industry

    Energy Technology Data Exchange (ETDEWEB)

    Driver, B.

    1996-12-31

    This paper describes strategies for promoting renewable resources in an era characterized by competitive pressures in the electric industry. It begins with a background section to describe the perspective from which I am writing and the nature of the pressures confronting renewables in 1996. Then, the paper turns to a discussion of the regulatory and other options to promote renewables in this environment. The major conclusion of the paper is that there is no {open_quotes}magic bullet{close_quotes} to guide the development of renewables through the developing competitive era within the electric industry. Indeed, it appears that the job can get done only through a combination of different measures at all levels of government. The author believes that among the most effective measures are likely to be: a national renewable resources generation standard; conditions attached to restructuring events; regional interstate compacts; regional risk-sharing consortia supported by federal and state tax and fiscal policy; and state {open_quotes}systems benefits charges;{close_quotes}

  8. State Electricity Regulatory Policy and Distributed Resources: Accommodating Distributed Resources in Wholesale Markets

    Energy Technology Data Exchange (ETDEWEB)

    Weston, F.; Harrington, C.; Moskovitz, D.; Shirley, W.; Cowart, R.; Sedano, R.

    2002-10-01

    Distributed resources can provide cost-effective reliability and energy services - in many cases, obviating the need for more expensive investments in wires and central station electricity generating facilities. Given the unique features of distributed resources, the challenge facing policymakers today is how to restructure wholesale markets for electricity and related services so as to reveal the full value that distributed resources can provide to the electric power system (utility grid). This report looks at the functions that distributed resources can perform and examines the barriers to them. It then identifies a series of policy and operational approaches to promoting DR in wholesale markets. This report is one in the State Electricity Regulatory Policy and Distributed Resources series developed under contract to NREL (see Annual Technical Status Report of the Regulatory Assistance Project: September 2000-September 2001, NREL/SR-560-32733). Other titles in this series are: (1) Distributed Resource Distribution Credit Pilot Programs - Revealing the Value to Consumers and Vendors, NREL/SR-560-32499; (2) Distributed Resources and Electric System Reliability, NREL/SR-560-32498; (3) Distribution System Cost Methodologies for Distributed Generation, NREL/SR-560-32500; (4) Distribution System Cost Methodologies for Distributed Generation Appendices, NREL/SR-560-32501

  9. Distribution Locational Marginal Pricing for Optimal Electric Vehicle Charging Management

    DEFF Research Database (Denmark)

    Li, Ruoyang; Wu, Qiuwei; Oren, Shmuel S.

    2013-01-01

    This paper presents an integrated distribution locational marginal pricing (DLMP) method designed to alleviate congestion induced by electric vehicle (EV) loads in future power systems. In the proposed approach, the distribution system operator (DSO) determines distribution locational marginal...... shown that the socially optimal charging schedule can be implemented through a decentralized mechanism where loads respond autonomously to the posted DLMPs by maximizing their individual net surplus...

  10. Electricity distribution within the future residence

    Energy Technology Data Exchange (ETDEWEB)

    Breeze, J.E.

    1981-11-01

    This study examined present residential wiring systems and identified their shortcomings. A list of the desirable attributes for future wiring systems is proposed. The outlook for the application to wiring systems of solid-state electronic devices is assessed. As further background for a proposed new wiring concept, the residential use of energy today and probable future trends are reviewed. Lastly, the concept of a distributed bus is proposed and developed on a conceptual basis for the residential wiring system of the future. The distributed bus concept can lead to the development of a residential wiring system to meet the following requirements: adaptable to meet probable future energy requirements for residences including alternative energy sources and energy storage; flexibility for servicing loads both in respect to location in the residence and to the size of the load; improved economy in the use of materials; capability for development as a designed or engineered system with factory assembled components and wiring harness; capability for expansion through the attachment of legs or auxillary rings; adaptable to any probable architectural residential development; capability for development to meet the requirements for ease of use and maintenance and with recognition of the growing importance of do-it-yourself repairs and alterations; and adaptable to the full range of solid-state electronics and micro-computer devices and controls including the concept of load control and management through the use of a central control module. 66 refs., 15 figs., 1 tab.

  11. MARKETING CHANNELS AND DISTRIBUTION DECISIONS IN THE SPORT BUSINESS INDUSTRY

    Directory of Open Access Journals (Sweden)

    Alexandru Lucian MIHAI

    2014-11-01

    Full Text Available The sport business must determine how to get its products from the manufacturer or producer to the consumer. Additionally, in this industry, there are products produced at a point where the consumer must be present at its production to consume the product. These products are sports events, such as a professional basketball game, a football match, or a super cross race. In these types of products, the event - the product - is staged at a facility where fans will gather to watch. The sport business will have made decisions regarding the facility in relation to location and other factors that will make the facility attractive to the consumer as a place in which to consume these types of products. This paper presents a brief overview about distribution in the sport business industry, the role of distribution in marketing strategy, the selection of a distribution network, and the types of distribution intermediaries available for moving and / or offering sport business industry products.

  12. Proposal to Include Electrical Energy in the Industrial Return Statistics

    CERN Document Server

    2003-01-01

    At its 108th session on the 20 June 1997, the Council approved the Report of the Finance Committee Working Group on the Review of CERN Purchasing Policy and Procedures. Among other topics, the report recommended the inclusion of utility supplies in the calculation of the return statistics as soon as the relevant markets were deregulated, without reaching a consensus on the exact method of calculation. At its 296th meeting on the 18 June 2003, the Finance Committee approved a proposal to award a contract for the supply of electrical energy (CERN/FC/4693). The purpose of the proposal in this document is to clarify the way electrical energy will be included in future calculations of the return statistics. The Finance Committee is invited: 1. to agree that the full cost to CERN of electrical energy (excluding the cost of transport) be included in the Industrial Service return statistics; 2. to recommend that the Council approves the corresponding amendment to the Financial Rules set out in section 2 of this docum...

  13. Strategies to address transition costs in the electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, L.; Hadley, S.; Hirst, E.

    1996-07-01

    Transition costs are the potential monetary losses that electric- utility shareholders, ratepayers, or other parties might experience because of structural changes in the electricity industry. Regulators, policy analysts, utilities, and consumer groups have proposed a number of strategies to address transition costs, such as immediately opening retail electricity markets or delaying retail competition. This report has 3 objectives: identify a wide range of strategies available to regulators and utilities; systematically examine effects of strategies; and identify potentially promising strategies that may provide benefits to more than one set of stakeholders. The many individual strategies are grouped into 6 major categories: market actions, depreciation options, rate-making actions, utility cost reductions, tax measures, and other options. Of the 34 individual strategies, retail ratepayers have primary or secondary responsibility for paying transition costs in 19 of the strategies, shareholders in 12, wheeling customers in 11, taxpayers in 8, and nonutility suppliers in 4. Most of the strategies shift costs among different segments of the economy, although utility cost reductions can be used to offset transition costs. Most of the strategies require cooperation of other parties, including regulators, to be implemented successfully; financial stakeholders must be engages in negotiations that hold the promise of shared benefits. Only by rejecting ``winner-take-all`` strategies will the transition-cost issue be expeditiously resolved.

  14. Economic aspects of electricity and industrial heat generating reactors

    International Nuclear Information System (INIS)

    Gaussens, J.; Moulle, N.; Dutheil, F.

    1964-01-01

    The economic advantage of electricity-generating nuclear stations decreases when their size decreases. However, when a counter-pressure turbine is joined on to a reactor and the residual heat can be properly used, it can be shown that fairly low capacity nuclear equipment may compete with conventional equipment under certain realistic enough conditions. The aim of this paper is to define these special conditions under which nuclear energy can be profitable. They are connected with the location and the general economic environment of the station, the pattern of the electricity and heat demands it must meet, the level of fuel and specific capital costs, nuclear and conventional. These conditions entail certain technical and economic specifications for the reactors used in this way otherwise they are unlikely to be competitive. In addition, these results are referred to the potential steam and electricity market, which leads us to examine certain uses for the heat generated by double purpose power stations; for example, to supply combined industrial plants, various types of town heating and for removal of salt from sea water. (authors) [fr

  15. Future development of the electricity systems with distributed generation

    Energy Technology Data Exchange (ETDEWEB)

    Bayod-Rujula, Angel A. [Department of Electrical Engineering, Centro Politecnico Superior, University of Zaragoza, C/Maria de Luna, 3, 50018 Zaragoza (Spain)

    2009-03-15

    Electrical power systems have been traditionally designed taking energy from high-voltage levels, and distributing it to lower voltage level networks. There are large generation units connected to transmission networks. But in the future there will be a large number of small generators connected to the distribution networks. Efficient integration of this distributed generation requires network innovations. A development of active distribution network management, from centralised to more distributed system management, is needed. Information, communication, and control infrastructures will be needed with increasing complexity of system management. Some innovative concepts such as microgrids and virtual utilities will be presented. (author)

  16. Testing viability of cross subsidy using time-variant price elasticities of industrial demand for electricity: Indian experience

    International Nuclear Information System (INIS)

    Chattopadhyay, Pradip

    2007-01-01

    Indian electric tariffs are characterized by very high rates for industrial and commercial classes to permit subsidized electric consumption by residential and agricultural customers. We investigate the viability of this policy using monthly data for 1997-2003 on electric consumption by a few large industrial customers under the aegis of a small distribution company in the state of Uttar Pradesh. For a given price/cost ratio, it can be shown that if the cross-subsidizing class' electricity demand is sufficiently elastic, increasing the class' rates fail to recover incremental cross-subsidy necessary to support additional revenues for subsidized classes. This suboptimality is tested by individually estimating time-variant price-elasticities of demand for these industrial customers using Box-Cox and linear regressions. We find that at least for some of these customers, cross-subsidy was suboptimal prior to as late as October 2001, when rates were changed following reforms

  17. Testing viability of cross subsidy using time-variant price elasticities of industrial demand for electricity: Indian experience

    Energy Technology Data Exchange (ETDEWEB)

    Chattopadhyay, Pradip [New Hampshire Public Utilities Commission, 21 South Fruit Street, Suite 10, Concord NH 03301 (United States)]. E-mail: pradip.chattopadhyay@puc.nh.gov

    2007-01-15

    Indian electric tariffs are characterized by very high rates for industrial and commercial classes to permit subsidized electric consumption by residential and agricultural customers. We investigate the viability of this policy using monthly data for 1997-2003 on electric consumption by a few large industrial customers under the aegis of a small distribution company in the state of Uttar Pradesh. For a given price/cost ratio, it can be shown that if the cross-subsidizing class' electricity demand is sufficiently elastic, increasing the class' rates fail to recover incremental cross-subsidy necessary to support additional revenues for subsidized classes. This suboptimality is tested by individually estimating time-variant price-elasticities of demand for these industrial customers using Box-Cox and linear regressions. We find that at least for some of these customers, cross-subsidy was suboptimal prior to as late as October 2001, when rates were changed following reforms.

  18. Distributed Electrical Energy Systems: Needs, Concepts, Approaches and Vision

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Jun [University of Denver; Gao, Wenzhong [University of Denver; Zheng, Xinhu [University of Minnesota; Yang, Liuqing [Colorado State University; Hao, Jun [University of Denver; Dai, Xiaoxiao [University of Denver

    2017-09-01

    Intelligent distributed electrical energy systems (IDEES) are featured by vast system components, diversifled component types, and difficulties in operation and management, which results in that the traditional centralized power system management approach no longer flts the operation. Thus, it is believed that the blockchain technology is one of the important feasible technical paths for building future large-scale distributed electrical energy systems. An IDEES is inherently with both social and technical characteristics, as a result, a distributed electrical energy system needs to be divided into multiple layers, and at each layer, a blockchain is utilized to model and manage its logic and physical functionalities. The blockchains at difierent layers coordinate with each other and achieve successful operation of the IDEES. Speciflcally, the multi-layer blockchains, named 'blockchain group', consist of distributed data access and service blockchain, intelligent property management blockchain, power system analysis blockchain, intelligent contract operation blockchain, and intelligent electricity trading blockchain. It is expected that the blockchain group can be self-organized into a complex, autonomous and distributed IDEES. In this complex system, frequent and in-depth interactions and computing will derive intelligence, and it is expected that such intelligence can bring stable, reliable and efficient electrical energy production, transmission and consumption.

  19. Decentralised electrical distribution network in power plants

    International Nuclear Information System (INIS)

    Mannila, P.; Lehtonen, M.

    2000-02-01

    A centralised network is a dominating network solution in today's power plants. In this study a centralised and a decentralised network were designed in order to compare them economically and technically. The emphasis of this study was on economical aspects, but also the most important technical aspects were included. The decentralised network requires less space and less cabling since there is no switchgear building and distribution transformers are placed close to the consumption in the field of a power plant. MV-motors and distribution transformers build up a ring. Less cabling and an absent switchgear building cause considerable savings. Component costs of both of the networks were estimated by using data from fulfilled power plant projects and turned out to be smaller for the decentralised network. Simulations for the decentralised network were done in order to find a way to carry out earth fault protection and location. It was found out that in high resistance earthed system the fault distance can be estimated by a relatively simple method. The decentralised network uses a field bus, which offers many new features to the automation system of a power plant. Diversified information can be collected from the protection devices in order to schedule only the needed maintenance duties at the right time. Through the field bus it is also possible to control remotely a power plant. The decentralised network is built up from ready-to-install modules. These modules are tested by the module manufacturer decreasing the need for field testing dramatically. The work contribution needed in the electrification and the management of a power plant project reduces also due the modules. During the lifetime of a power plant, maintenance is easier and more economical. (orig.)

  20. Managing relationships between electric power industry restructuring and grid reliability

    International Nuclear Information System (INIS)

    Thomas, R.J.

    2005-01-01

    The electricity system is a critical infrastructure, and its continued and reliable functioning is essential to the nation's economy and well-being. However, the inter-dependency of electricity networks is not completely understood. The economic impact of outages was discussed in this white paper. It was suggested that moving to a restructured environment has degraded the reliability of the bulk system. New institutional arrangements and approaches to information management are needed. It was suggested that reliability practices caused the 2003 blackout, and not technical failures. Uncertainties in the restructured market were discussed, as well as incentives to maintain system adequacy. Examples of deregulation in other countries were presented. Organizational complexities were reviewed, including the Federal Energy Regulatory Commission's (FERC) requirements and the new layers of complexity that have been added to the decision-making process in the light of restructuring. Planning and connectivity issues were reviewed. The need for design standards in power grid control centres was discussed. Difficulties in collecting data from different control centres were considered. Issues concerning the lack of investment in research and development were discussed, with particular reference to the urgent need for coordinated research programs. The looming manpower crisis in the electric power industry was also discussed. Recommendations included ensuring that the transmission system can support a market structure; building a national reliability centre; solving the manpower crisis; and testing market designs before deploying them. It was concluded that good engineering design principles, including experimental economic testing, should be required of any new electricity market design before authorizing its use. 31 refs., 1 tab., 6 figs

  1. Information and management system for the secondary electricity distribution network

    Energy Technology Data Exchange (ETDEWEB)

    Knezevic, M. (Rudnik i Termoelectrana Gacko u Osnivanju (Yugoslavia))

    1988-07-01

    Emphasizes the importance of a reliable and continuous secondary electrical distribution network for surface coal mine productivity. Interruptions in equipment operation caused by mechanical and electrical failures should be eliminated without delay. Effective communication systems should lead to reliable management and high productivity in mines. It is suggested that mines be divided into four groups according to their sensitivity to supply interruptions, and provided with remotely controlled signalling devices linked to main and auxiliary dispatching stations equipped with micro-computers. Productivity may be increased by some 50-70% and supply costs decreased by some 35% if appropriate electrical distribution systems are used. A sketch of a secondary electrical supply network is attached. 11 refs.

  2. Magnetic field compatibility of components for ITER electrical distribution systems

    International Nuclear Information System (INIS)

    Hourtoule, J.; Van Houtte, D.; Hertout, P.; Fejoz, P.

    2004-01-01

    The electrical distribution boards and control cubicles, installed inside the ITER Tokamak building, can be subject to a constant or slowly variable magnetic field up to 70 mT, 10 mT/s induced by ITER coils. This is a very unusual environmental condition and there are almost no data available on static magnetic field compatibility for the standard industrial electrical and electronic components that might be used inside standard low voltage distribution boards and standard control boards. CEA has especially taken in charge the test of electronic, control and signal conditioning units. For this purpose a test bed composed of a solenoid and a 30 V, 800 A power supply, has been developed at CEA Cadarache. Its characteristics are the following: - Magnetic field capability: 40 mT; - Variation of field: up to 10 mT/s. Useful dimensions for equipment under test: 500 x 500 x 500 mm. The list of the components to be tested has been identified trying to find common and recent components of different manufacturers. Test procedures have been written following the most relevant IEC standards and manufacturing recommendations and procedures. Magnetic compatibility tests on the basic components of standard low voltage control boards has been performed. All components tested are more or less sensitive to magnetic fields and the effect varies from the simple perturbation of the output signals to the partial destruction of some electronic card. The most sensitive are the ferromagnetic components like small power supplies transformers, relays, on inductors. For power supplies the most important consequence is the increase of the consumption (primary current). For most of the conditioning units the operational limits were found in the range of 30 mT (destruction of materials and overload of the supply) For PLC (Programme Logic Control) central units tested, the limit is in the order of 40 mT (components permanently out of service) Relays are limited to 15 mT (outputs oscillations, no

  3. Charging Schedule for Electric Vehicles in Danish Residential Distribution Grids

    DEFF Research Database (Denmark)

    Pillai, Jayakrishnan Radhakrishna; Huang, Shaojun; Bak-Jensen, Birgitte

    2015-01-01

    energy sources like wind in power systems. The EV batteries could be used to charge during periods of excess electricity production from wind power and reduce the charging rate or discharge on deficit of power in the grid, supporting system stability and reliability. By providing such grid services......The prospects of Electric Vehicles (EVs) in providing clean transportation and supporting renewable electricity is widely discussed in sustainable energy forums worldwide. The battery storage of EVs could be used to address the variability and unpredictability of electricity produced from renewable......, the vehicle owner, vehicle fleet operator and other parties involved in the process could economically benefit from the process. This paper investigates an optimal EV charging plan in Danish residential distribution grids in view of supporting high volumes of wind power in electricity grids. The results...

  4. The Future of Electricity Distribution Regulation. Lessons from International Experience

    Energy Technology Data Exchange (ETDEWEB)

    Nillesen, P.H.L.

    2008-12-03

    This thesis contains five essays on the regulation of electricity distribution networks, each presenting a different point of view. Two essays use US data to demonstrate that incentive-based regulation has valuable application within a management setting and can lead to gaming behaviour within a regulatory setting. One essay discusses the lessons that can be drawn from the failed first electricity distribution price control review in the Netherlands. One essay presents the views of 75 international regulation managers and gives recommendations on ways to improve the regulatory quality and process. The final essay analyses the economic consequences of the forced ownership unbundling of the electricity distribution networks in 1998 in New Zealand, and draws lessons for future structural remedies that may be sought in other countries.

  5. The Future of Electricity Distribution Regulation. Lessons from International Experience

    International Nuclear Information System (INIS)

    Nillesen, P.H.L.

    2008-01-01

    This thesis contains five essays on the regulation of electricity distribution networks, each presenting a different point of view. Two essays use US data to demonstrate that incentive-based regulation has valuable application within a management setting and can lead to gaming behaviour within a regulatory setting. One essay discusses the lessons that can be drawn from the failed first electricity distribution price control review in the Netherlands. One essay presents the views of 75 international regulation managers and gives recommendations on ways to improve the regulatory quality and process. The final essay analyses the economic consequences of the forced ownership unbundling of the electricity distribution networks in 1998 in New Zealand, and draws lessons for future structural remedies that may be sought in other countries

  6. Industry evolution, rational agents and the transition to sustainable electricity production

    NARCIS (Netherlands)

    Safarzynska, K.E.; van den Bergh, J.C.J.M.

    2011-01-01

    Guiding a transition to low carbon electricity requires a good understanding of the substitution of old by new technologies in the electricity industry. With the aim of explaining historical change from coal to gas in the British electricity industry, we develop a formal model of technological

  7. 76 FR 3517 - Standards of Performance for Fossil-Fuel-Fired, Electric Utility, Industrial-Commercial...

    Science.gov (United States)

    2011-01-20

    ... Standards of Performance for Fossil-Fuel-Fired, Electric Utility, Industrial-Commercial-Institutional, and... following: Category NAICS \\1\\ Examples of regulated entities Industry 221112 Fossil fuel-fired electric utility steam generating units. Federal Government 22112 Fossil fuel-fired electric utility steam...

  8. 78 FR 73589 - Energy Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric...

    Science.gov (United States)

    2013-12-06

    ... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors; Proposed... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors AGENCY... proposes energy conservation standards for a number of different groups of electric motors that DOE has not...

  9. Energized CO{sub 2} dry ice blast cleaning firmly grounded in the Canadian electrical industry

    Energy Technology Data Exchange (ETDEWEB)

    Lindsay, K.

    1999-02-01

    Development and use of energized carbon dioxide dry ice blast technology for cleaning electrical distribution system components by Oakville Hydro and Milton Hydro (both in Ontario) is discussed. The technology was developed by Alpheus Cleaning Technologies of California and Puget Sound Power and Light Company after a two-year study that commenced in 1991, and has been supplied in Canada by Wickens Industrial Ltd., since 1993 for cleaning various industrial and non-energized electrical applications in the automotive, printing , food processing and other manufacturing industries and hydro generating facilities. The unique cleaning dynamics of this technology allow for the removal of contaminants that are much more stubborn than those encountered in pad-mounted switchgear and other electrical apparatus. Dry ice pellets, by expanding to 400 times their solid state on impact, create a flushing action that helps to remove contaminants. No grit or solvents are required and the process is non-toxic. In using the process workers wear fire retardant clothing, 40 kV-Class 4 rubber gloves and full face shields. Dielectric tests are performed routinely to confirm the dielectric integrity of the spray wand components. A two stage inspection/trouble report is completed on every job. Use of this technology eliminates power interruptions to customers, improves system reliability and safety, reduces cleaning time to a minimum, and eliminated the need for reclamation of grit or solvent containment.

  10. Structural changes in industrial electricity use. The case of the pulp and paper industry in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Henriksson, E.; Lundmark, R. [Economics Unit, Department of Business Administration and Social Science, Luleaa University of Technology, SE-971 87 Lulea (Sweden)

    2013-05-15

    The purpose of this paper is to analyse altering energy demand patterns and energy factor substitution possibilities over time in the pulp and paper industry in order to increase our understanding of suitable policy options for increasing energy efficiency. The investigation employs a flexible translog cost function and an unbalanced panel data set covering 32 pulp and paper mills over the time period 1974-2005 in Sweden. Specifically, we test whether energy factor demand patterns in the industry for the period 1974-1990 differ from those during the latter period, 1991-2005. The empirical results reveal that even though the Swedish pulp and paper industry is relatively insensitive to changes in energy factor input prices in the short run, we find evidence of significant changes over time. According to the results, the own-price sensitivity of fuel has increased since the 1970s and the 1980s, thus indicating that fuel demand has become more sensitive to short-run changes in relative prices. The estimated cross-price elasticities between electricity and fuel also support the hypothesis of increased substitutability over time. However, the null hypothesis of an equal own-price elasticity of electricity demand across the two time periods cannot be rejected.

  11. Strategies to address transition costs in a restructuring electricity industry

    International Nuclear Information System (INIS)

    Baxter, Lester; Hirst, Eric; Hadley, Stanton

    1997-01-01

    This paper discusses the potential financial consequences, or transition costs, of transforming electricity generation from a regulated to a competitive market in the US. Industry-wide estimates suggest potential monetary losses could exceed $100 billion as a result of the move to competition. The paper discusses the most prominent strategies suggested to address these potential losses. For each strategy, the paper identifies the parties most likely to bear the financial consequences. Most strategies do nothing to reduce the total costs to society, but instead shift costs from one set of economic actors to another. The exceptions are those strategies that result in economic-efficiency gains, which can then be used to offset the transition costs. Most of the strategies examined require the cooperation of several parties, including regulators, to be implemented successfully. (author)

  12. Financing future exports of Canada's electrical power equipment industry

    International Nuclear Information System (INIS)

    Hay, K.A.J.; Saravanamuttoo, C.A.

    1992-01-01

    The economic impact on the Canadian power sector of continued constraints on the availability of concessionary export financing is examined. An overview of the structure of the Canadian electrical power equipment industry is provided, followed by a discussion of its competitiveness and performance. Export prospects are outlined and separate reviews are presented of hydroelectric and thermal expansion. A global market of US $17 billion for hydroelectric power in the 1990s is forecast, and a market of US $300 billion for all forms of power generation in developing Asia. The export strategies of international competitive bidding, forming a consortium within an international multinational enterprise, co-financing with Japanese aid agencies, and direct negotiation are discussed. The costs and benefits of concessional financing are assessed and shown to bring net fiscal benefits. 12 refs., 2 tabs

  13. Evolution of industrial sector electricity demand in Costa Rica

    International Nuclear Information System (INIS)

    Fischer, Steven C.

    2005-01-01

    This note is a preliminary investigation into the relationship between the efficiency of electricity utilization in the Costa Rican industrial sector and the competitive pressures generated by the implementation of economic reforms, in particular, the progressive liberalization of international trade, in the years since the debt and economic crisis of the early 1980s. The steady, year-by-year, reduction in the rate of import tariff protection, with only temporary interruptions and reverses, has been the most consistently implemented component of the macroeconomic, trade, and financial sector reforms upon which this country has embarked over the past two decades. The note sheds some light on the nature of the general policy environment that is conductive to an efficient utilization of energy in the productive sectors and to the success of national energy efficiency promotion programs in this and other parts of the world. (Author)

  14. Transition-cost issues for a restructuring US electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Utilities regulators can use a variety of approaches to calculate transition costs. We categorized these approaches along three dimensions. The first dimension is the use of administrative vs. market procedures to value the assets in question. Administrative approaches use analytical techniques to estimate transition costs. Market valuation relies on the purchase price of particular assets to determine their market values. The second dimension concerns when the valuation is done, either before or after the restructuring of the electricity industry. The third dimension concerns the level of detail involved in the valuation, what is often called top-down vs. bottom-up valuation. This paper discusses estimation approaches, criteria to assess estimation methods, specific approaches to estimating transition costs, factors that affect transition-cost estimates, strategies to address transition costs, who should pay transition costs, and the integration of cost recovery with competitive markets.

  15. Market study on the Mexican market for electrical distribution equipment

    International Nuclear Information System (INIS)

    1991-01-01

    A brief historical survey of the development of the Mexican electric power sector is presented, along with an overview of the state of the Mexican economy since the late 1980s and the present characteristics of the Mexican electricity sector. The Mexican market for electric power generation and distribution equipment is then assessed, from the perspective of Canadian suppliers and manufacturers intending to enter this market. Projected consumption of electrical generation and distribution equipment in Mexico for 1994 is estimated at US$1,035,600,000 ($719.4 million in production, $356.9 million in imports, and $40.7 million in exports). This market increased 12.3% in 1990, and since power demand in Mexico has been growing faster than growth in capacity, it is possible that investments in the electricity sector will grow at faster rates. Items which are traditionally imported include nuclear reactors and related equipment, boilers, turbines, power breakers, valves, coal and ash handling equipment, relays, automatic controls, and chemical treatment equipment. The USA has the greatest share of the import market with 35%, followed by Japan (22%), Switzerland (18%), and Germany (13%). Canadian exports have concentrated on distribution equipment and only totalled $1.7 million in 1990. Electricity is distributed to some 16.6 million users over a national interconnected system having total installed capacity of 30,513 MW in 1991. There are plans to increase capacity by 9.7 GW by 1994 and another 37.4-47.8 GW between 1995 and 2010. Projections of electricity needs by region are listed along with the new power plants targeted for investment. Market liberalization and lowering of tariffs have made the Mexican market more accessible to exporters. 8 tabs

  16. 30 CFR 77.501 - Electric distribution circuits and equipment; repair.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electric distribution circuits and equipment... OF UNDERGROUND COAL MINES Electrical Equipment-General § 77.501 Electric distribution circuits and equipment; repair. No electrical work shall be performed on electric distribution circuits or equipment...

  17. Competition and power pooling in the electricity industry

    International Nuclear Information System (INIS)

    Jasinski, P.; Yarrow, G.; Fusaro, P.

    1995-01-01

    Two contributions to the debate on power pooling and competition in the electricity supply industry are presented. In the first, the situation in England and Wales where power pooling was introduced shortly before privatization is analysed. Pooling has existed for many years in the USA but as an inter-generator arrangement designed to optimize production and costs. The British system sought in addition to establish a spot market in which bulk buyers as well as bulk suppliers could participate. There are however obvious weaknesses in the pool as a competitive market and it is argued that a combination of pooling arrangements and longer-term bilateral supply contracts are more likely to offer the prospect of workably competitive and efficient outcomes. The second contribution discusses how competitive markets will evolve in the USA under the new regime of less onerous regulation heralded by the Energy Policy Act if 1992 and the emergence of electricity trading markets which followed. In particular, the proposal by the California Public Utility commission favouring a mandatory Poolco is examined. Poolco would operate the transmission grid and dispatch generating plants while the utilities would retain ownership of transmission facilities and be required to supply the pool. This is seen as representing only partial deregulation and not to be consistent with moves to further competition and encourage free markets. (U.K.)

  18. Analysis of Strengthening Steel Distribution Channel in Domestic Automotive Industry

    OpenAIRE

    Pangraksa, Sugeng; Djajadiningrat, Surna Tjahja

    2013-01-01

    Distribution has strategic role to spread up product from manufacturer into end-user. Automotive industry needs distribution channel which has: excellent data management, timely delivery management, excellent quality management, and competitive reducing cost. Krakatau Steel (KS) distributors has weaknesses to enter automotive market current that require tight prerequisite such as: consistency of product quality, good cooperation, close relationship, continuously cost reduction, wide spread to...

  19. Electricity distribution. Price control, reliability and customer services: response to OFFER

    International Nuclear Information System (INIS)

    1994-02-01

    This document presents the views of the National Consumer Council to a recent consultation paper from OFFER, the body responsible for regulation of the United Kingdom electric power industry. The financial performance of the Regional Electricity Companies (RECs) is reviewed by examining how it relates to the prices paid by domestic consumers. A critical analysis is presented of OFFER's notion of the revision of the existing price control mechanism for the distribution businesses within the RECs. Standards of performance, debt and consumer disconnection are also examined. (UK)

  20. PV solar electricity industry: Market growth and perspective

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, Winfried [RWE SCHOTT Solar GmbH, Carl-Zeiss-Str. 4, 63755 Alzenau (Germany)

    2006-11-23

    The photovoltaic (PV) solar electricity market has shown an impressive 33% growth per year since 1997 until today with market support programs as the main driving force. The rationales for this development and the future projections towards a 100 billion | industry in the 2020s, by then only driven by serving cost-competitively customer needs are described. The PV market, likely to have reached about 600MW in the year 2003, is discussed according to its four major segments: consumer applications, remote industrial electrification, developing countries, and grid-connected systems. While in the past, consumer products and remote industrial applications used to be the main cause for turnover in PV, in recent years the driving forces are more pronounced in the grid-connected systems and by installations in developing countries. Examples illustrating the clear advantage of systems using PV over conventional systems based, e.g., on diesel generators in the rural and remote electrification sector are discussed. For the promotion of rural electrification combined with the creation of local business and employment, suitable measures are proposed in the context of the PV product value chain. The competitiveness of grid-connected systems is addressed, where electricity generating costs for PV are projected to start to compete with conventional utility peak power quite early between 2010 and 2020 if time-dependent electricity tariffs different for bulk and peak power are assumed. The most effective current-pulling force for grid-connected systems is found to be the German Renewable Energy (EEG) Feed-in Law where the customers are focusing on yield, performance, and long-life availability. The future growth in the above-defined four market segments are discussed and the importance of industry political actions in order to stimulate the markets either in grid-connected systems by feed-in tariff programs as well as for off-grid rural developing country applications by long

  1. PV solar electricity industry: Market growth and perspective

    International Nuclear Information System (INIS)

    Hoffmann, Winfried

    2006-01-01

    The photovoltaic (PV) solar electricity market has shown an impressive 33% growth per year since 1997 until today with market support programs as the main driving force. The rationales for this development and the future projections towards a 100 billion | industry in the 2020s, by then only driven by serving cost-competitively customer needs are described. The PV market, likely to have reached about 600MW in the year 2003, is discussed according to its four major segments: consumer applications, remote industrial electrification, developing countries, and grid-connected systems. While in the past, consumer products and remote industrial applications used to be the main cause for turnover in PV, in recent years the driving forces are more pronounced in the grid-connected systems and by installations in developing countries. Examples illustrating the clear advantage of systems using PV over conventional systems based, e.g., on diesel generators in the rural and remote electrification sector are discussed. For the promotion of rural electrification combined with the creation of local business and employment, suitable measures are proposed in the context of the PV product value chain. The competitiveness of grid-connected systems is addressed, where electricity generating costs for PV are projected to start to compete with conventional utility peak power quite early between 2010 and 2020 if time-dependent electricity tariffs different for bulk and peak power are assumed. The most effective current-pulling force for grid-connected systems is found to be the German Renewable Energy (EEG) Feed-in Law where the customers are focusing on yield, performance, and long-life availability. The future growth in the above-defined four market segments are discussed and the importance of industry political actions in order to stimulate the markets either in grid-connected systems by feed-in tariff programs as well as for off-grid rural developing country applications by long

  2. Impact of electric industry deregulation on gas markets: a power marketer's perspective

    International Nuclear Information System (INIS)

    Jahns, F.H.

    1996-01-01

    The impact of electric industry deregulation on gas markets was examined. The presentation included industry comparisons of 1994 gas total revenues versus electricity total revenues for residential, commercial, and industrial use. A chart forecasting the outlook for gas-fired generation of electric power indicated that the use of natural gas as feedstock for power generation will increase from 12% to 37% during the period 1994 to 2003. 16 figs

  3. Network cost in transmission and distribution of electric power

    International Nuclear Information System (INIS)

    Lindahl, A.; Naeslund, B.; Oettinger-Biberg, C.; Olander, H.; Wuolikainen, T.; Fritz, P.

    1994-01-01

    This report is divided in two parts, where part 1 treats the charges on the regional nets with special emphasis on the net owners tariffs on a deregulated market. Part 2 describes the development of the network costs in electric power distribution for the period 1991-1993. 11 figs, 33 tabs

  4. Electric field distribution and simulation of avalanche formation due ...

    Indian Academy of Sciences (India)

    Electric field distributions and their role in the formation of avalanche due to the passage of heavy ions in parallel grid avalanche type wire chamber detectors are evaluated using a Monte Carlo simulation. The relative merits and demerits of parallel and crossed wire grid configurations are studied. It is found that the crossed ...

  5. Estimation of particle size distribution of nanoparticles from electrical ...

    Indian Academy of Sciences (India)

    ... blockade (CB) phenomena of electrical conduction through atiny nanoparticle. Considering the ZnO nanocomposites to be spherical, Coulomb-blockade model of quantum dot isapplied here. The size distribution of particle is estimated from that model and compared with the results obtainedfrom AFM and XRD analyses.

  6. Voltage Support from Electric Vehicles in Distribution Grid

    DEFF Research Database (Denmark)

    Huang, Shaojun; Pillai, Jayakrishnan Radhakrishna; Bak-Jensen, Birgitte

    2013-01-01

    The paper evaluates the voltage support functions from electric vehicles (EVs) on a typical Danish distribution grid with high EV penetration. In addition to the popular voltage control modes, such as voltage droop charging (low voltage level leads to low charging power) and reactive power support...

  7. Impact Assessment of Electric Boilers in Low Voltage Distribution Network

    DEFF Research Database (Denmark)

    Sinha, Rakesh; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna

    2018-01-01

    Flexibility from the electricity supply, with high share of intermittent energy sources such as wind and solar, has been offered by combined heat and power (CHP) generation in Denmark for decades. There could be periods where the fuel prices are higher than the electricity prices (even -ve), during...... high wind production and is idle for electric boilers (EBs) operation. In the future, using EBs, excess electricity from wind turbines can be effectively utilized for heat production, and still meet the thermal demand by decreasing CHP production. Thus, there is need for demand side flexibility...... control incorporated based on grid voltages, restricts the operation of EBs but ensures operation of the distribution system within limits still trying to keep the thermal comfort in the houses....

  8. Control strategies for power distribution networks with electric vehicles integration

    DEFF Research Database (Denmark)

    Hu, Junjie

    of electrical energy. A smart grid can also be dened as an electricity network that can intelligently integrate the actions of all users connected to it - generators, consumers and those that do both - in order to eciently deliver sustainable, economic and secure electricity supplies. This thesis focuses...... of the ii market. To build a complete solution for integration of EVs into the distribution network, a price coordinated hierarchical scheduling system is proposed which can well characterize the involved actors in the smart grid. With this system, we demonstrate that it is possible to schedule the charging......Demand side resources, like electric vehicles (EVs), can become integral parts of a smart grids because instead of just consuming power they are capable of providing valuable services to power systems. EVs can be used to balance the intermittent renewable energy resources such as wind and solar...

  9. Integration of Electric Vehicles in Low Voltage Danish Distribution Grids

    DEFF Research Database (Denmark)

    Pillai, Jayakrishnan Radhakrishna; Thøgersen, Paul; Møller, Jan

    2012-01-01

    Electric Vehicles (EVs) are considered as one of the important components of the future intelligent grids. Their role as energy storages in the electricity grid could provide local sustainable solutions to support more renewable energy. In order to estimate the extent of interaction of EVs...... in the electricity grid operation, a careful examination in the local electricity system is essential. This paper investigates the degree of EV penetration and its key influence on the low voltage distribution grids. Three detailed models of residential grids in Denmark are considered as test cases in this study...... it is shown that there is enough head-space on the transformer capacity which can be used to charge many EVs during a day. The overall transformer capability of handling EV loads varies between 6-40% for peak and minimum demand hours, which is dependent on the robustness of the grids. The voltage drops...

  10. Electrical distribution studies for the 200 Area tank farms

    International Nuclear Information System (INIS)

    Fisler, J.B.

    1994-01-01

    This is an engineering study providing reliability numbers for various design configurations as well as computer analyses (Captor/Dapper) of the existing distribution system to the 480V side of the unit substations. The objective of the study was to assure the adequacy of the existing electrical system components from the connection at the high voltage supply point through the transformation and distribution equipment to the point where it is reduced to its useful voltage level. It also was to evaluate the reasonableness of proposed solutions of identified deficiencies and recommendations of possible alternate solutions. The electrical utilities are normally considered the most vital of the utility systems on a site because all other utility systems depend on electrical power. The system accepts electric power from the external sources, reduces it to a lower voltage, and distributes it to end-use points throughout the site. By classic definition, all utility systems extend to a point 5 feet from the facility perimeter. An exception is made to this definition for the electric utilities at this site. The electrical Utility System ends at the low voltage section of the unit substation, which reduces the voltage from 13.8 kV to 2,400, 480, 277/480 or 120/208 volts. These transformers are located at various distances from existing facilities. The adequacy of the distribution system which transports the power from the main substation to the individual area substations and other load centers is evaluated and factored into the impact of the future load forecast

  11. Electrical distribution studies for the 200 Area tank farms

    Energy Technology Data Exchange (ETDEWEB)

    Fisler, J.B.

    1994-08-26

    This is an engineering study providing reliability numbers for various design configurations as well as computer analyses (Captor/Dapper) of the existing distribution system to the 480V side of the unit substations. The objective of the study was to assure the adequacy of the existing electrical system components from the connection at the high voltage supply point through the transformation and distribution equipment to the point where it is reduced to its useful voltage level. It also was to evaluate the reasonableness of proposed solutions of identified deficiencies and recommendations of possible alternate solutions. The electrical utilities are normally considered the most vital of the utility systems on a site because all other utility systems depend on electrical power. The system accepts electric power from the external sources, reduces it to a lower voltage, and distributes it to end-use points throughout the site. By classic definition, all utility systems extend to a point 5 feet from the facility perimeter. An exception is made to this definition for the electric utilities at this site. The electrical Utility System ends at the low voltage section of the unit substation, which reduces the voltage from 13.8 kV to 2,400, 480, 277/480 or 120/208 volts. These transformers are located at various distances from existing facilities. The adequacy of the distribution system which transports the power from the main substation to the individual area substations and other load centers is evaluated and factored into the impact of the future load forecast.

  12. The Distribution of Benefits for Players in Agricultural Industrial Chain

    Institute of Scientific and Technical Information of China (English)

    Wanming; LI; Huibo; SUN

    2015-01-01

    Players of the agricultural industrial chain pursue their own profit maximization,which can lead to conflicts of interest and affect the stability of the industrial chain. Therefore,fair and reasonable profit allocation mechanism is the key to guaranteeing the development and strengthening the strategic alliance relationship between participate members. Shapley model is an effective method to solve the profit distribution in cooperative relations. But it does not consider the three factors: risks faced by players during the operation of the agricultural industrial chain,technology innovation ability,and the degree of participating in the cooperation. So,correction factors are introduced to modify the Shapley value model,in order to make the distribution of benefits more equitable and reasonable,and effectively guide practice.

  13. Optimal Operation of Electric Vehicles in Competitive Electricity Markets and Its Impact on Distribution Power Systems

    DEFF Research Database (Denmark)

    Hu, Weihao; Chen, Zhe; Bak-Jensen, Birgitte

    2011-01-01

    represent the future of electricity markets in some ways, is chosen as the studied power system in this paper. The impact of the optimal operation strategy for electric vehicles together with the optimal load response to spot market price on the distribution power system with high wind power penetrations...... are also discussed in the paper. Simulation results show that the proposed optimal operation strategy is an effective measure to achieve minimum energy costs of the PEV. The optimal operation strategy of the PEV and the optimal load response may have significant effects on the distribution power system......Since the hourly spot market price is available one day ahead in Denmark, the electricity price could be transferred to the consumers and they may make some optimal charge and discharge schedules for their electric vehicles in order to minimize their energy costs. This paper presents an optimal...

  14. Development on power distribution technologies of four electric power companies in Japan. The Tokyo Electric Power Co. , Inc

    Energy Technology Data Exchange (ETDEWEB)

    1989-07-01

    Electric power companies have been needed to cope with various needs in accordance with the progress of highly information-oriented society, the improvement of industrial technology, and the advancement and diversification of the living environment. In such situation, the power distribution section of Tokyo Electric Power has promoted technical development, setting up following priority items to put into operation: to reduce power failure caused by works and accidents, to improve reliability in supply, to reduce costs of construction and all over business management, to serve customers to answer various needs, to develop new technology and new methods based on the medium- and long-term prospect, and so forth. Several examples of recent technical development are introduced here. They are as follows; compact equipment and materials for electric poles to match the circumstances of cities and to simplify the construction method for power distribution, a 750kVA large high-voltage power-generation truck to make provision against an emergency such as a disaster by a typhoon, a compact transformer used on the ground, a high-voltage automatic cabinet, and a detector to find the failure of indoor power distribution works in resistances in a short time. 8 figs.

  15. Electric industry Latin American: Achievements and perspectives - Peru

    International Nuclear Information System (INIS)

    Anon

    1999-01-01

    It includes a historical review; what is the general management of electricity, actors that intervene in the electric market, goals, alternative sources, investment opportunities and foreign investment

  16. Explaining the inefficiency of electrical distribution companies. Peruvian firms

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Reyes, Raul [Organismo Supervisor de la Inversion en Energia y Mineria, OSINERGMIN (Peru); Tovar, Beatriz [Infrastructure and Transport Research Group (EIT), Department of Applied Economics, University of Palmas de Gran Canaria (Spain)

    2010-09-15

    This paper investigates the extent to which the structural reform of the Peruvian electricity market, implemented in the 1990s, has improved the efficiency of the distribution companies; and it evaluates the influence on efficiency of firm specific explanatory variables. To do this, we rely on data from 14 distribution companies between 1996 and 2006. The results indicate that the incentives generated by the reform process led to the firms becoming more efficient. Moreover, the time trend and private management of the distribution companies are variables that positively affect the levels of efficiency, whereas the lower network densities are then the greater the inefficiency. (author)

  17. Explaining the inefficiency of electrical distribution companies. Peruvian firms

    International Nuclear Information System (INIS)

    Perez-Reyes, Raul; Tovar, Beatriz

    2010-01-01

    This paper investigates the extent to which the structural reform of the Peruvian electricity market, implemented in the 1990s, has improved the efficiency of the distribution companies; and it evaluates the influence on efficiency of firm specific explanatory variables. To do this, we rely on data from 14 distribution companies between 1996 and 2006. The results indicate that the incentives generated by the reform process led to the firms becoming more efficient. Moreover, the time trend and private management of the distribution companies are variables that positively affect the levels of efficiency, whereas the lower network densities are then the greater the inefficiency. (author)

  18. Life cycle assessment of the Danish electricity distribution network

    DEFF Research Database (Denmark)

    Turconi, Roberto; Simonsen, Christian G.; Byriel, Inger P.

    2014-01-01

    Purpose This article provides life cycle inventory data for electricity distribution networks and a life cycle assessment (LCA) of the Danish transmission and distribution networks. The aim of the study was to evaluate the potential importance of environmental impacts associated with distribution...... complexity and material consumption. Infrastructure provided important contributions to metal depletion and freshwater eutrophication (copper and aluminum for manufacturing of the cables and associated recycling being the most important). Underground 50-kV lines had larger impacts than overhead lines, and 0...

  19. Efficiency and regulation of the Slovenian electricity distribution companies

    International Nuclear Information System (INIS)

    Filippini, Massimo; Hrovatin, Nevenka; Zoric, Jelena

    2004-01-01

    The Slovenian Energy Law, adopted in 1999, has opened the internal market to competition up to 64% of the final consumption. The opening of the internal market to foreign competition is envisaged for 2003. With regard to the methodology of price regulation, the Energy Law introduces the 'price-cap' regulation, which aims to give firms incentive for cost reduction. To provide information for effective price regulation, we estimated a cost frontier function on a sample of Slovenian electricity distribution utilities over the 1991-2000 period. The estimated efficient frontier could be used by Slovenian regulatory agency as a benchmark to regulate network access prices. Our results show that Slovenian distribution companies are cost inefficient. We have also proved the presence of increasing returns to scale with most utilities not achieving the minimum efficient scale. Thus, the Slovenian regulatory authority should consider how to induce mergers of small electricity distribution utilities into larger units

  20. Evaluation of the Impact of Outsourcing on the Performance of Lithuanian Electricity Industry

    Directory of Open Access Journals (Sweden)

    Ligita Gasparėnienė

    2016-01-01

    Full Text Available The article is aimed at evaluation of the impact of outsourcing on the performance of Lithuanian electricity industry. Research methods include systematic analysis of the scientific literature and expert evaluation. Theoretical analysis of the literature has enabled to identify the most significant outsourcing determinants, which have the impact on the performance of electricity industry, and the main outsourcing-related risks for the companies operating in this industry. The results of the empirical research have revealed the effects of various outsourcing determinants on the performance of Lithuanian electricity industry as well as negative outcomes of outsourcing application in the researched industry.

  1. Stratum Electricity Markets: Toward Multi-temporal Distributed Risk Management for Sustainable Electricity Provision

    Science.gov (United States)

    Wu, Zhiyong (Richard)

    Motivated by the overall challenge of ensuring long-term sustainable electricity service, we view this challenge as a long-term decision making problem under uncertainties. We start by recognizing that, independent of the industry organization, the uncertainties are enormous and often exogenous to the energy service providers. They are multi-dimensional and are result of fundamental drivers, ranging from the supply side, through the demand side, to the regulatory and policy sides. The basic contribution of this thesis comes from the recognition that long-term investments for ensuring reliable and stable electricity service critically depend on how these uncertainties are perceived, valued and managed by the different stakeholders within the complex industry organization such as the electric power industry. We explain several reasons why price signals obtained from current short-term electricity markets alone are not sufficient enough for long-term sustainable provision. Some enhancements are presented in the thesis to improve the short-term electricity market price signals to reflect the true cost of operation. New market mechanisms and instruments are needed to facilitate the stakeholders to better deal with long-term risks. The problems of ensuring long-term stable reliable service in the sense of the traditional resource adequacy requirements are revisited in both the restructuring industry and regulated industry. We introduce a so-called Stratum Electricity Market (SEM) design as the basic market mechanism for solving the problem of long-term reliable electricity service through a series of interactive multi-lateral market exchange platforms for risks communication, management and evaluations over various time horizons and by the different groups of stakeholders. In other words, our proposed SEM is a basic IT-enabled framework for the decision making processes by various parties over different time. Because of the uniqueness of electricity as a commodity, the

  2. Cost and quality gains from diversification and vertical integration in the electricity industry: A DEA approach

    International Nuclear Information System (INIS)

    Arocena, Pablo

    2008-01-01

    This paper analyzes the degree of economies of vertical integration, diversification and scale in the electricity industry by means of Data Envelopment Analysis. We estimate the impact that alternative forms of unbundling would have on the cost and quality of supply, measured as the number and duration of supply interruptions, in a group of Spanish electric utilities. We find evidence of the existence of cost and quality gains from integrating power generation and distribution in the range of 1.1 to 4.9%, whereas diversifying the source of power generation saves between 1.3 and 4.3% of costs and quality. Finally, the scale efficiency of the largest utilities could be improved by dividing them into smaller units, provided that their current vertical scope and generation-mix are preserved. (author)

  3. Wright tariffs in the Spanish electricity industry: the case of residential consumption

    International Nuclear Information System (INIS)

    Castro-Rodriguez, F.

    1999-01-01

    In this paper a capacity price model is developed for the Spanish electricity industry which allows the presentation of the Spanish utilization level tariffs as an example of duration tariffs (Wright tariffs) when duration is approximated by the ratio of consumption to power used. Using this model and data on the residential consumption of electricity, several optimal two-part tariffs are computed, considering different hypothesis on the configuration of the generating equipment. It has been found that the optimal tariff maintaining universal service increases welfare if the generating equipment and the output assignment to the different technologies are taken as given. Furthermore, if the regulator is concerned not only with efficiency, but also with distributive issues, then welfare losses associated with the existing regulatory regime are even larger

  4. Cost and quality gains from diversification and vertical integration in the electricity industry: A DEA approach

    Energy Technology Data Exchange (ETDEWEB)

    Arocena, Pablo [Universidad Publica de Navarra, Dpto. Gestion de Empresas, Campus de Arrosadia, 31006 Pamplona (Spain)

    2008-01-15

    This paper analyzes the degree of economies of vertical integration, diversification and scale in the electricity industry by means of Data Envelopment Analysis. We estimate the impact that alternative forms of unbundling would have on the cost and quality of supply, measured as the number and duration of supply interruptions, in a group of Spanish electric utilities. We find evidence of the existence of cost and quality gains from integrating power generation and distribution in the range of 1.1 to 4.9%, whereas diversifying the source of power generation saves between 1.3 and 4.3% of costs and quality. Finally, the scale efficiency of the largest utilities could be improved by dividing them into smaller units, provided that their current vertical scope and generation-mix are preserved. (author)

  5. Electricity distribution as an unsustainable natural monopoly. A potential outcome of New Zealand's regulatory regime

    International Nuclear Information System (INIS)

    Gunn, C.; Sharp, B.

    1999-01-01

    The ongoing reform of New Zealand's electricity supply industry has attempted to separate its potentially competitive elements from those with naturally monopolistic characteristics. Yet, some competition for distribution services is occurring, raising the question as to whether electricity distributors are natural monopolies as is typically assumed. This paper presents a simple model of a representative New Zealand distribution business, and shows that, in a true economic sense, distributors are most probably sustainable natural monopolies as expected. However, the model demonstrates that a mechanism for competition may arise because the financial principles enshrined in the Ministry of Commerce's regulatory regime can produce unsustainable cost structures and unintentionally introduce elements of contestability into the market for distribution services. 15 refs

  6. Transition costs in the electricity industry: A summary of issues

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, L.; Hirst, E.; Hadley, S.

    1996-10-01

    Progress is evident as the restructuring debate in the U.S. electricity industry completes its third year. The Federal Energy Regulatory Commission released a final rule on transmission open access-a key element to facilitate more efficient wholesale markets. The majority of states have initiated investigations or discussions on restructuring retail markets. Yet hurdles remain in formulating and implementing state-level restructuring proposals. Perhaps foremost among these hurdles is the issue of transition costs (the potential monetary losses experienced by utilities, consumers, and other economic actors as a result of government initiatives to transform electricity generation from a regulated to a competitive market). Transition costs are approximately equal to the difference between the embedded cost for generation services under traditional cost-of-service regulation and the competitive-market price for power. When government takes action to open current monopoly franchises to multiple generation providers and the competitive-market price falls below embedded generation costs, then transition costs will arise. Transition costs will include one or more of the following four classes of costs: (1) assets, primarily utility-owned power plants; (2) liabilities, primarily long-term power-purchase and fuel-supply contracts; (3) regulatory assets, including deferred expenses and costs that regulators allow utilities to place on their balance sheets; and (4) public-policy programs, such as energy efficiency, low-income programs, and research and development. What is at issue in the transition-cost debate? The debate turns on four questions: (1) How large are the potential transition costs from restructuring? (2) How are these costs estimated? (3) What, if anything, might be done to address these costs? (4) Who will ultimately pay for any remaining costs and how? This paper summarizes some of the key results from a project at ORNL that addresses these four questions.

  7. A study of hierarchical structure on South China industrial electricity-consumption correlation

    Science.gov (United States)

    Yao, Can-Zhong; Lin, Ji-Nan; Liu, Xiao-Feng

    2016-02-01

    Based on industrial electricity-consumption data of five southern provinces of China from 2005 to 2013, we study the industrial correlation mechanism with MST (minimal spanning tree) and HT (hierarchical tree) models. First, we comparatively analyze the industrial electricity-consumption correlation structure in pre-crisis and after-crisis period using MST model and Bootstrap technique of statistical reliability test of links. Results exhibit that all industrial electricity-consumption trees of five southern provinces of China in pre-crisis and after-crisis time are in formation of chain, and the "center-periphery structure" of those chain-like trees is consistent with industrial specialization in classical industrial chain theory. Additionally, the industrial structure of some provinces is reorganized and transferred in pre-crisis and after-crisis time. Further, the comparative analysis with hierarchical tree and Bootstrap technique demonstrates that as for both observations of GD and overall NF, the industrial electricity-consumption correlation is non-significant clustered in pre-crisis period, whereas it turns significant clustered in after-crisis time. Therefore we propose that in perspective of electricity-consumption, their industrial structures are directed to optimized organization and global correlation. Finally, the analysis of distance of HTs verifies that industrial reorganization and development may strengthen market integration, coordination and correlation of industrial production. Except GZ, other four provinces have a shorter distance of industrial electricity-consumption correlation in after-crisis period, revealing a better performance of regional specialization and integration.

  8. Temperature Diffusion Distribution of Electric Wire Deteriorated by Overcurrent

    Science.gov (United States)

    Choi, Chung-Seog; Kim, Hyang-Kon; Kim, Dong-Woo; Lee, Ki-Yeon

    This study presents thermal diffusion distribution of the electric wires when overcurrent is supplied to copper wires. And then, this study intends to provide a basis of knowledge for analyzing the causes of electric accidents through hybrid technology. In the thermal image distribution analysis of the electric wire to which fusing current was supplied, it was found that less heat was accumulated in the thin wires because of easier heat dispersion, while more heat was accumulated in the thicker wires. The 3-dimensional thermal image analysis showed that heat distribution was concentrated at the center of the wire and the inclination of heat distribution was steep in the thicker wires. When 81A was supplied to 1.6mm copper wire for 500 seconds, the surface temperature of wire was maximum 46.68°C and minimum 30.87°C. It revealed the initial characteristics of insulation deterioration that generates white smoke without external deformation. In the analysis with stereoscopic microscope, the surface turned dark brown and rough with the increase of fusing current. Also, it was known that exfoliation occurred when wire melted down with 2 times the fusing current. With the increase of current, we found the number of primary arms of the dendrite structure to be increased and those of the secondary and tertiary arms to be decreased. Also, when the overcurrent reached twice the fusing current, it was found that columnar composition, observed in the cross sectional structure of molten wire, appeared and formed regular directivity. As described above, we could present the burning pattern and change in characteristics of insulation and conductor quantitatively. And we could not only minimize the analysis error by combining the information but also present the scientific basis in the analysis of causes of electric accidents, mediation of disputes on product liability concerning the electric products.

  9. Space station electrical power distribution analysis using a load flow approach

    Science.gov (United States)

    Emanuel, Ervin M.

    1987-01-01

    The space station's electrical power system will evolve and grow in a manner much similar to the present terrestrial electrical power system utilities. The initial baseline reference configuration will contain more than 50 nodes or busses, inverters, transformers, overcurrent protection devices, distribution lines, solar arrays, and/or solar dynamic power generating sources. The system is designed to manage and distribute 75 KW of power single phase or three phase at 20 KHz, and grow to a level of 300 KW steady state, and must be capable of operating at a peak of 450 KW for 5 to 10 min. In order to plan far into the future and keep pace with load growth, a load flow power system analysis approach must be developed and utilized. This method is a well known energy assessment and management tool that is widely used throughout the Electrical Power Utility Industry. The results of a comprehensive evaluation and assessment of an Electrical Distribution System Analysis Program (EDSA) is discussed. Its potential use as an analysis and design tool for the 20 KHz space station electrical power system is addressed.

  10. Public policy responsibilities in a restructured electric industry: An analysis of values, objectives, and approaches

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, B.E.; Schweitzer, M.

    1996-03-01

    Discussions and decisions in states as diverse as California, Wisconsin, and Rhode Island are focusing on moving the United States electric industry from one dominated by vertically-integrated and highly regulated utility-based electricity monopolies to one characterized by largely divested and independent generation, transmission, and distribution sectors and by vigorous wholesale and retail competition. Numerous issues must be solved for this transition to be successful. Three of the most important are how to deal with stranded investments, how to provide open access to transmission systems, and how to deal with potentially stranded benefits, which is the current term being used to describe environmental and social programs such as demand-side management, low income programs, and renewable energy. This report explores how to meet public policy responsibilities, which are growing more acute, in a proactive fashion in a restructured United States electric industry. The specific goals of this report are to (1) assess trade-offs in the short-term in meeting public policy responsibilities associated with stranded benefits and (2) introduce a series of new ideas that, if enacted, could substantially satisfy important public policy considerations.

  11. Investment incentives: regulation of the Finnish electricity distribution

    International Nuclear Information System (INIS)

    Kinnunen, Kaisa

    2006-01-01

    Investments into the electricity distribution network are needed to support competition and to guarantee the security of supply as well as a good quality of electricity. The aim of this paper is to study the ex post regulatory system in Finland in context of investment incentives. The second objective is to study how the investments in the sector have developed after the liberalisation and what seem to be the most important factors influencing investments in light of empirical information and how regulation affects them. The investment volumes vary much between years but on average, no drastic developments have taken place

  12. Modelling grid losses and the geographic distribution of electricity generation

    DEFF Research Database (Denmark)

    Østergaard, Poul Alberg

    2005-01-01

    In Denmark more than 40% of the electricity consumption is covered by geographically scattered electricity sources namely wind power and local CHP (cogeneration of heat and power) plants. This causes problems in regard to load balancing and possible grid overloads. The potential grid problems...... and methods for solving these are analysed in this article on the basis of energy systems analyses, geographic distribution of consumption and production and grid load-flow analyses. It is concluded that by introducing scattered load balancing using local CHP plants actively and using interruptible loads...

  13. Leadership skills for the California electric utility industry: A qualitative study

    Science.gov (United States)

    Hubbell, Michael

    The purpose of this qualitative study was to determine the skills and knowledge necessary for leaders in the California electric utility industry in 2020. With rapid industry changes, skills to effectively lead and stay competitive are undetermined. Leaders must manage an increasingly hostile social and political environment, incorporate new technology, and deal with an aging workforce and infrastructure. Methodology. This study utilized a qualitative case study design to determine the factors that influence the skills leaders will require in 2020. It incorporated the perspectives of current electric utility leaders while looking with a future lens. Findings. Interviews were conducted with transmission and distribution (T&D) directors at 3 investor-owned public electric utilities headquartered in California. The questions followed an open-ended format to gather responses as perceived by electric utility leaders for each research question category: overall skills, aging workforce, regulation, technology, and leading younger generations. The research resulted in 18 major themes: 5 for overall skills, 3 for aging workforce, 4 for regulation, 3 for technology, and 3 for leading younger generations. Conclusions. The study identified leadership skills including the ability to embrace, leverage, and stay current with technology; understand and provide a clear vision for the future; increase creativity; manage the next set of workers; motivate during a time of great change; prepare for knowledge transfer and change in workforce culture; manage regulatory expectations; expand potential utility opportunities; leverage "big data"; allow worker collaboration; and understand what drives younger generations. Recommendations. California-based electric utility leaders can remain effective by implementing key strategies identified herein. Further research could examine perspectives of additional utility leaders who lead in organizational units outside of T&D, expand the research to

  14. Optimal Remanufacturing Certification Contracts in the Electrical and Electronic Industry

    Directory of Open Access Journals (Sweden)

    Huihui Liu

    2017-03-01

    Full Text Available While remanufacturing is highly encouraged worldwide, some original equipment manufacturers (OEMs in the electrical and electronics industry are still not willing to embrace remanufacturing, for fear of expensive investment or the cannibalization of existing products. Meanwhile, third-party remanufacturers’ (TPRs remanufactured products are developing quickly. Due to quality reasons, consumers usually have a higher preference for OEM-certified remanufactured products than uncertified ones. As such, remanufacturing certification has become a strategy that OEMs can use to benefit from product remanufacturing. Our paper focuses on the remanufacturing certification contract between an OEM and a TPR. Once certified, the TPR makes payments to the OEM. These payment terms will affect their enthusiasm for participating in remanufacturing certification. By establishing game models among an OEM, a certified TPR, and an uncertified TPR, our paper explores three certification contracts, namely, the lump-sum payment, profit-sharing payment, and piece-rate payment. We identify the conditions for the OEM and certified TPR to reach a win-win outcome. Our results show that when TPRs have a high profit margin and there is no significant difference in consumers’ preferences between certified and non-certified remanufacturing channels, the profit-sharing payment contract yields the highest profit; otherwise, the piece-rate payment contract is best for the OEM.

  15. Privatization of British electricity supply industry: Critical analysis

    International Nuclear Information System (INIS)

    Cervigni, G.

    1993-01-01

    Until 1989, despite the partially disintegrated organization of the British electricity supply industry (ESI) and the attempt of the Energy Act of 1983 to pull down entrance barriers to the power generation business, ESI operated like an integrated monopoly. Between 1989 and 1990, ESI has been subjected to a reorganization process and transfer to the private sector with the declared aim of improving short and long run micro-economic efficiency. For this purpose, the attempt of introducing competition in the phases of the production process where possible and of regulating those which are structurally non competitive, has been made. The new configuration of ESI in terms of organizational structure, property regime and regulatory system is analyzed. Areas of improvement of the regulatory system and delayed key decisions of the public operator, are identified. However, any evaluation of the process as a whole can only relate to a minor part of the present situation; thus it subtends a scenary for the future, where the role of the regulatory authority is crucial

  16. Regulatory Improvements for Effective Integration of Distributed Generation into Electricity Distribution Networks

    International Nuclear Information System (INIS)

    Scheepers, M.J.J.; Jansen, J.C.; De Joode, J.; Bauknecht, D.; Gomez, T.; Pudjianto, D.; Strbac, G.; Ropenus, S.

    2007-11-01

    The growth of distributed electricity supply of renewable energy sources (RES-E) and combined heat and power (CHP) - so called distributed generation (DG) - can cause technical problems for electricity distribution networks. These integration problems can be overcome by reinforcing the network. Many European Member States apply network regulation that does not account for the impact of DG growth on the network costs. Passing on network integration costs to the DG-operator who is responsible for these extra costs may result in discrimination between different DG plants and between DG and large power generation. Therefore, in many regulatory systems distribution system operators (DSOs) are not being compensated for the DG integration costs. The DG-GRID project analysed technical and economical barriers for integration of distributed generation into electricity distribution networks. The project looked into the impact of a high DG deployment on the electricity distribution system costs and the impact on the financial position of the DSO. Several ways for improving network regulation in order to compensate DSOs for the increasing DG penetration were identified and tested. The DG-GRID project looked also into stimulating network innovations through economic regulation. The project was co-financed by the European Commission and carried out by nine European universities and research institutes. This report summarises the project results and is based on a number of DG-GRID reports that describe the conducted analyses and their results

  17. The {open_quotes}obligation to serve{close_quotes} and a competitive electric industry

    Energy Technology Data Exchange (ETDEWEB)

    Colton, R.D. [Fisher, Sheehan and Colton (United States)

    1997-11-01

    This report presents an assessment of what the ``obligation to serve`` might look like in a competitive electric industry. Broadly, this research has three objectives: to define the ``duty to serve`` of a competitive electric industry; to identify those companies to whom that duty applies; and to explain how that duty protects residual classes.

  18. Assessment of Eco-friendly Gases for Electrical Insulation to Replace the Most Potent Industrial Greenhouse Gas SF6.

    Science.gov (United States)

    Rabie, Mohamed; Franck, Christian M

    2018-01-16

    Gases for electrical insulation are essential for the operation of electric power equipment. This Review gives a brief history of gaseous insulation that involved the emergence of the most potent industrial greenhouse gas known today, namely sulfur hexafluoride. SF 6 paved the way to space-saving equipment for the transmission and distribution of electrical energy. Its ever-rising usage in the electrical grid also played a decisive role in the continuous increase of atmospheric SF 6 abundance over the last decades. This Review broadly covers the environmental concerns related to SF 6 emissions and assesses the latest generation of eco-friendly replacement gases. They offer great potential for reducing greenhouse gas emissions from electrical equipment but at the same time involve technical trade-offs. The rumors of one or the other being superior seem premature, in particular because of the lack of dielectric, environmental, and chemical information for these relatively novel compounds and their dissociation products during operation.

  19. Electrical Conductivity Distributions in Discrete Fluid-Filled Fractures

    Science.gov (United States)

    James, S. C.; Ahmmed, B.; Knox, H. A.; Johnson, T.; Dunbar, J. A.

    2017-12-01

    It is commonly asserted that hydraulic fracturing enhances permeability by generating new fractures in the reservoir. Furthermore, it is assumed that in the fractured system predominant flow occurs in these newly formed and pre-existing fractures. Among the phenomenology that remains enigmatic are fluid distributions inside fractures. Therefore, determining fluid distribution and their associated temporal and spatial evolution in fractures is critical for safe and efficient hydraulic fracturing. Previous studies have used both forward modeling and inversion of electrical data to show that a geologic system consisting of fluid filled fractures has a conductivity distribution, where fractures act as electrically conductive bodies when the fluids are more conductive than the host material. We will use electrical inversion for estimating electrical conductivity distribution within multiple fractures from synthetic and measured data. Specifically, we will use data and well geometries from an experiment performed at Blue Canyon Dome in Socorro, NM, which was used as a study site for subsurface technology, engineering, and research (SubTER) funded by DOE. This project used a central borehole for energetically stimulating the system and four monitoring boreholes, emplaced in the cardinal directions. The electrical data taken during this project used 16 temporary electrodes deployed in the stimulation borehole and 64 permanent electrodes in the monitoring wells (16 each). We present results derived using E4D from scenarios with two discrete fractures, thereby discovering the electric potential response of both spatially and temporarily variant fluid distribution and the resolution of fluid and fracture boundaries. These two fractures have dimensions of 3m × 0.01m × 7m and are separated by 1m. These results can be used to develop stimulation and flow tests at the meso-scale that will be important for model validation. Sandia National Laboratories is a multi

  20. Optimal pricing of transmission and distribution services in electricity supply

    International Nuclear Information System (INIS)

    Farmer, E.D.; Cory, B.J.; Perera, B.L.P.P.

    1995-01-01

    A new strategy for the separate pricing of transmission and distribution services in electricity supply is formulated and evaluated. The proposed methodology is a multivariate transmission generalisation of the method of peak load pricing previously applied to the optimal time-of-use pricing of generation on a power system with diverse generation technologies and with elastic demand. The method allocates both capacity and operational costs on a time-of-use basis, in an optimal manner, that avoids cross-subsidisation both between differing supply system participants and differing times of usage. The method is shown to promote the optimal development of the transmission, distribution or interconnecting systems, rewarding justified investments in transmission capacity and discouraging overinvestment. It also leads to appropriate returns on invested capital without significant 'revenue reconciliation'. This contrasts with SRMC pricing as is shown by a comparative revenue evaluation. It is concluded that the method has wide potential application in electricity supply. (author)

  1. Electric current distribution of a multiwall carbon nanotube

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Li-Ying; Chang, Chia-Seng, E-mail: jasonc@phys.sinica.edu.tw [Department of Physics, National Taiwan University, Taipei 10617, Taiwan (China); Institute of Physics, Academia Sinica, Taipei 11529, Taiwan (China); Nano Science and Technology Program, Taiwan International Graduate Program, Academia Sinica and National Taiwan University, Taiwan (China); Chen, Yu-Jyun [Institute of Physics, Academia Sinica, Taipei 11529, Taiwan (China)

    2016-07-15

    The electric current distribution in a multiwall carbon nanotube (MWCNT) was studied by in situ measuring the electric potential along an individual MWCNT in the ultra-high vacuum transmission electron microscope (TEM). The current induced voltage drop along each section of a side-bonded MWCNT was measured by a potentiometric probe in TEM. We have quantitatively derived that the current on the outermost shell depends on the applied current and the shell diameter. More proportion of the total electronic carriers hop into the inner shells when the applied current is increased. The larger a MWCNT’s diameter is, the easier the electronic carriers can hop into the inner shells. We observed that, for an 8 nm MWCNT with 10 μA current applied, 99% of the total current was distributed on the outer two shells.

  2. Aerogel-Based Insulation for Industrial Steam Distribution Systems

    Energy Technology Data Exchange (ETDEWEB)

    John Williams

    2011-03-30

    Thermal losses in industrial steam distribution systems account for 977 trillion Btu/year in the US, more than 1% of total domestic energy consumption. Aspen Aerogels worked with Department of Energy’s Industrial Technologies Program to specify, develop, scale-up, demonstrate, and deliver Pyrogel XT®, an aerogel-based pipe insulation, to market to reduce energy losses in industrial steam systems. The product developed has become Aspen’s best selling flexible aerogel blanket insulation and has led to over 60 new jobs. Additionally, this product has delivered more than ~0.7 TBTU of domestic energy savings to date, and could produce annual energy savings of 149 TBTU by 2030. Pyrogel XT’s commercial success has been driven by it’s 2-4X better thermal performance, improved durability, greater resistance to corrosion under insulation (CUI), and faster installation times than incumbent insulation materials.

  3. Electric vehicles integration within low voltage electricity networks & possibilities for distribution energy loss reduction

    NARCIS (Netherlands)

    Lampropoulos, I.; Veldman, E.; Kling, W.L.; Gibescu, M.; Slootweg, J.G.

    2010-01-01

    With the prospect of an increasing number of electric vehicles (EVs) on the road, domestic charging will be the most obvious way to recharge the vehicles’ batteries. However, this can have adverse impacts to low voltage (LV) distribution grids such as high current demand, increased 3-phase load

  4. Distributed Wind Resource Assessment: State of the Industry

    Energy Technology Data Exchange (ETDEWEB)

    Fields, Jason [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tinnesand, Heidi [National Renewable Energy Lab. (NREL), Golden, CO (United States); Baring-Gould, Ian [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-06-01

    In support of the U.S. Department of Energy (DOE) Wind and Water Power Technologies Office (WWPTO) goals, researchers from DOE's National Renewable Energy Laboratory (NREL), National Wind Technology Center (NWTC) are investigating the Distributed Wind Resource Assessment (DWRA) process, which includes pre-construction energy estimation as well as turbine site suitability assessment. DWRA can have a direct impact on the Wind Program goals of maximizing stakeholder confidence in turbine performance and safety as well as reducing the levelized cost of energy (LCOE). One of the major components of the LCOE equation is annual energy production. DWRA improvements can maximize the annual energy production, thereby lowering the overall LCOE and improving stakeholder confidence in the distributed wind technology sector by providing more accurate predictions of power production. Over the long term, one of the most significant benefits of a more defined DWRA process could be new turbine designs, tuned to site-specific characteristics that will help the distributed wind industry follow a similar trajectory to the low-wind-speed designs in the utility-scale industry sector. By understanding the wind resource better, the industry could install larger rotors, capture more energy, and as a result, increase deployment while lowering the LCOE. a direct impact on the Wind Program goals of maximizing stakeholder confidence in turbine performance and safety as well as reducing the levelized cost of energy (LCOE). One of the major components of the LCOE equation is annual energy production. DWRA improvements can maximize the annual energy production, thereby lowering the overall LCOE and improving stakeholder confidence in the distributed wind technology sector by providing more accurate predictions of power production. Over the long term, one of the most significant benefits of a more defined DWRA process could be new turbine designs, tuned to site-specific characteristics that

  5. Electric technology in the food service industry; Les technologies electriques dans les services alimentaires

    Energy Technology Data Exchange (ETDEWEB)

    Labonte, A. [Hydro-Quebec, Montreal, PQ (Canada)

    1997-04-01

    Many innovative technologies in the food service industry have been made through the use of electricity as a source of energy. Electricity made it possible to improve the productivity and profitability of the food industry. Some of these technologies include: (1) cooking by induction, which is based on the principle of magnetic fields, (2) combined convection ovens which accelerate thermal exchange, and (3) electric fryers. The advantages of each technology were described. The environmental advantage of using electricity as an energy source in the food service industry was also discussed.

  6. Architecture, design and protection of electrical distribution networks

    Energy Technology Data Exchange (ETDEWEB)

    Sorrel, J.P. [Schneider electric Industries SA (France)

    2000-07-01

    Architectures related to AII Electric Ship (AES) require high level of propulsion power. Merchant ships and obviously warships require a low vulnerability, a high reliability and availability, a simple maintainability as well as an ordinary ode of operation. These constraints converge to an optimum single line diagram. We will focus on the mode of operation of the network, its constraints, the facilities to use a ring distribution for the ship service distribution system, the earthing of HV network as well as future developments. (author)

  7. Implementing electric vehicles in urban distribution: A discrete event simulation

    OpenAIRE

    Lebeau, Philippe; Macharis, Cathy; Mierlo, Joeri Van; Maes, Guillaume

    2013-01-01

    Urban freight transport becomes increasingly important with the development of cities. However, it generates also inefficiencies on social, economic and environmental aspects. A possible solution is the use of urban distribution centres in order to rationalise the deliveries and to operate the last miles with clean vehicles. Electric vehicles are gaining attention lately but some barriers remain. Since costs barriers were already investigated, the paper aimed at evaluating the difference of p...

  8. Aging based maintenance and reinvestment scheduling of electric distribution

    Energy Technology Data Exchange (ETDEWEB)

    Korpijarvi, J.

    2012-07-01

    The maintenance of electric distribution network is a topical question for distribution system operators because of increasing significance of failure costs. In this dissertation the maintenance practices of the distribution system operators are analyzed and a theory for scheduling maintenance activities and reinvestment of distribution components is created. The scheduling is based on the deterioration of components and the increasing failure rates due to aging. The dynamic programming algorithm is used as a solving method to maintenance problem which is caused by the increasing failure rates of the network. The other impacts of network maintenance like environmental and regulation reasons are not included to the scope of this thesis. Further the tree trimming of the corridors and the major disturbance of the network are not included to the problem optimized in this thesis. For optimizing, four dynamic programming models are presented and the models are tested. Programming is made in VBA-language to the computer. For testing two different kinds of test networks are used. Because electric distribution system operators want to operate with bigger component groups, optimal timing for component groups is also analyzed. A maintenance software package is created to apply the presented theories in practice. An overview of the program is presented (orig.)

  9. Analysis on Potential of Electric Energy Market based on Large Industrial Consumer

    Science.gov (United States)

    Lin, Jingyi; Zhu, Xinzhi; Yang, Shuo; Xia, Huaijian; Yang, Di; Li, Hao; Lin, Haiying

    2018-01-01

    The implementation of electric energy substitution by enterprises plays an important role in promoting the development of energy conservation and emission reduction in china. In order to explore alternative energy potential of industrial enterprises, to simulate and analyze the process of industrial enterprises, identify high energy consumption process and equipment, give priority to alternative energy technologies, and determine the enterprise electric energy substitution potential predictive value, this paper constructs the evaluation model of the influence factors of the electric energy substitution potential of industrial enterprises, and uses the combined weight method to determine the weight value of the evaluation factors to calculate the target value of the electric energy substitution potential. Taking the iron and steel industry as an example, this method is used to excavate the potential. The results show that the method can effectively tap the potential of the electric power industry

  10. Prediction of Industrial Electric Energy Consumption in Anhui Province Based on GA-BP Neural Network

    Science.gov (United States)

    Zhang, Jiajing; Yin, Guodong; Ni, Youcong; Chen, Jinlan

    2018-01-01

    In order to improve the prediction accuracy of industrial electrical energy consumption, a prediction model of industrial electrical energy consumption was proposed based on genetic algorithm and neural network. The model use genetic algorithm to optimize the weights and thresholds of BP neural network, and the model is used to predict the energy consumption of industrial power in Anhui Province, to improve the prediction accuracy of industrial electric energy consumption in Anhui province. By comparing experiment of GA-BP prediction model and BP neural network model, the GA-BP model is more accurate with smaller number of neurons in the hidden layer.

  11. Electric power distribution. 5th Rev. Ed. Elektrische Energieverteilung

    Energy Technology Data Exchange (ETDEWEB)

    Flosdorff, R; Hilgarth, G

    1986-01-01

    The first chapter on electric power supply networks discusses transmitting media, their characteristic values, and the dimensioning of electric lines and networks; cables are given particular attention. High-voltage d.c. transmission and reactive power compensation are discussed. The next chapter describes the calculation of short-circuits and earth leakages for various neutral circuits on the basis of symmetric components. The newly introduced mesh current method for complex calculation of electric networks makes use of the potential of pocket computers. Chapter 3 discusses protective devices, i.e. earth systems and electronic protection. The next two chapters describe switch gear and power plants, including recent technical changes. The final chapter, which discusses the electric power industry, has been rewritten and extended. Methods of calculation, e.g. annual cost and cash value, are applied to transmitting media and plants. There is an extensive appendix with characteristic values of cables and overhead lines, graphical symbols, distinguishing signs of wiring diagrams, a bibliography of books, DIN standards, VDE specifications, and formulas.

  12. The development of power generation by electricity supply undertakings and industries in Western Europe

    International Nuclear Information System (INIS)

    Cura, H.

    1998-01-01

    Following the events of recent years - the opening up of the east, efforts to stimulate international competition - the Western European electricity industry is strongly on the move. In spite of the non-uniformity of the electricity supply structures in the individual countries, the trend towards liberalization of the electricity market is characterized by different forms of expression. Against this background, this paper provides a review of the status and prospects of electricity demand developments and of primary energy supply. It considers the consequences which thereby arise for the power plant inventory of electricity supply undertakings and industries. (orig.) [de

  13. 76 FR 70166 - Electrical Standards for Construction and General Industry; Extension of the Office of Management...

    Science.gov (United States)

    2011-11-10

    ...] Electrical Standards for Construction and General Industry; Extension of the Office of Management and Budget... contained in the Electrical Standards for Construction (29 CFR part 1926, Subpart K) and for General... maintenance of electric utilization equipment that prevent death and serious injuries among construction and...

  14. Industry will meet productivity goals, but can it hold the line on prices: electrical Canada, 1967

    Energy Technology Data Exchange (ETDEWEB)

    1967-01-01

    The Canadian electrical industry can expect to grow more muscle in 1967. Demand for electricity increases across the country and the big power projects will be the Nelson Columbia, Peace, Manicouagan, Outardes and Churchill Falls. With more promotion by utilities scheduled better electrical living will get a record shot in the arm.

  15. The Effects of Competition Policy on TFP Growth: Some Evidence from the Malaysian Electricity Supply Industry

    OpenAIRE

    Kok Fong See; Tim Coelli

    2009-01-01

    The main objectives of this paper are to measure total factor productivity (TFP) growth in the electricity supply industry in Peninsular Malaysia from 1975 to 2005 and to assess the impact of private entry reforms upon TFP in this industry. Prior to 1995, a government-linked, vertically-integrated electricity utility, Tenaga Nasional Berhad (TNB), was essentially the sole operator. However, since 1995 privately-owned Independent Power Producers (IPPs) have also begun generating electricity, a...

  16. Situational analysis for the current status of the electric vehicle industry : a report for presentation to the Electric Vehicle Industry Steering Committee of Natural Resources Canada

    International Nuclear Information System (INIS)

    Fleet, B.; Li, J.K.; Gilbert, R.

    2008-01-01

    This paper outlined the status of the electric vehicle industry in Canada. While the low energy density of electric batteries has prevented the widespread adoption of electric-powered vehicles, new developments in nickel metal hydride (Ni-MH) batteries have provided a 3- to 4-fold increase in energy density than lead-acid batteries. The Ni-MH batteries have enabled the emergence of hybrid automobiles that use electric motors to supplement or provide traction with internal combustion engine (ICE) generators that power the motors or charge batteries. Plug-in hybrids use batteries that can be charged from the electricity grid or by on-board generators. Lithium-based batteries contain twice the amount of energy density as Ni-MH batteries, and are now being upscaled for use in plug-in hybrids. Canada has many assets that favour the development of electric vehicle technology as it has a high degree of urbanization, and a widely diversified electric supply. Canada is also a major player in EV technology, and a world leader in renewable electricity generation. However, considerable investment and leadership is needed in order to foster EV technology in Canada. It was concluded that an EV industry can be developed by facilitating collaboration among organizations currently promoting sustainable transportation, identifying potential centres of engineering and technological excellence, and defining markets relevant to a Canadian EV industry. 32 refs., 6 tabs., 4 figs

  17. Regulation of electricity distribution in Spain. Principles and mechanisms for distribution

    International Nuclear Information System (INIS)

    Gomez San Roman, T.

    2007-01-01

    First, a conceptual framework for electricity network regulation is presented. In the second part, this paper reviews the current situation of electricity distribution regulation in Spain highlighting its main shortcomings. Finally, some guidelines for the design of a new remuneration model for each distribution company are proposed. This new regulatory model will increase efficiency, promoting the required investment for improving quality of supply and reducing energy losses. This model is based on two new regulatory tools: regulatory accounting and network reference models. (Author) 15 refs

  18. Network connection of distributed electricity production - a preliminary study

    International Nuclear Information System (INIS)

    Pleym, Anngjerd; Mogstad, Olve

    2002-01-01

    It will be necessary to lower the barriers for utilisation of distributed energy sources in order to increase the use of such sources in Norway. A relatively extensive R and D activity would be required for reaching this goal. Available Norwegian and international guidelines and technical requirements with respect to network connection of the distributed energy sources are studied with the aim of exposing needs for further R and D initiatives. A limited monitor is also carried out among the Norwegian network businesses with distributed units in their networks. The results show that the main focus in the R and D activities has drifted away from establishing guidelines for technical requirements for network coupling. Some verification work remains in investigating the usefulness of the existing international and the specific commercial network guidelines. For the network industry the main focus must be on the two following areas: 1) How will large concentrations of distributed production units connected to the same network influence the voltage quality and the delivery reliability in the networks. 2) How can the network businesses employ the distributed production units in their networks. A Nordic project (Finland, Sweden, Norway) which will study these problems is being established. Large national scientific institutions will be involved. The executive committee will consist of representatives from Finenergy, Elforsk and EBL Kompetanse and other financing institutions and industries. A Finnish business Merinova, is to be appointed to the project leadership

  19. Empirical effects of policy induced competition in the electricity industry : the case of district heat pricing in Finland 1996-2002

    International Nuclear Information System (INIS)

    Peltola-Ojala, P.; Linden, L.

    2007-01-01

    Following open-market competition in Finland's household electricity markets, the Electricity Market Authority began regulation of electricity and distribution networks to limit unreasonable pricing and to separate the different business units, notably production, distribution and sales. The district heating industry in Finland is regulated through general Competition Laws. The district heating industry is considered to have a regional monopoly within its distribution network and the level of public ownership within the industry is high. This paper presented the results of a study that analyzed how the policy induced competition in the electricity industry in Finland has affected the district heating industry. Both the electricity and district heating industries compete in the same household heating markets. The impact of competition was studied through pricing behaviour using panel data models. The data was gathered from 76 district district heating companies in Finland from 1996 to 2002. It was shown that the price of district heating decreased slightly as a result of electricity market reform, but the effect was short-term. The price decrease was stronger in apartment buildings than in small houses. The results suggest that the district heat markets are non-competitive and some evidence which supports regulatory threat hypothesis can be found. It was suggested that large and market dominant firms are more responsive to policy reform compared to small firms. 16 refs., 5 tabs., 2 figs., 3 appendices

  20. EDISON - research programme on electricity distribution automation 1993-1997. Interim report 1995

    Energy Technology Data Exchange (ETDEWEB)

    Lehtonen, M. [ed.] [VTT Energy, Espoo (Finland). Energy Systems

    1996-12-31

    The report comprises a summary of the results of the first three years of the research programme EDISON on distribution automation in Finnish electrical utilities. The five year research programme (1993-1997) is conducted under the leadership of VTT Energy, in cooperation with universities, distribution companies and the manufacturing industry. The main part of funding is from the Technology Development Centre (Tekes) and from manufacturing companies. The goal of the research programme is to develop a new scheme for a complete distribution automation system, including the network automation, computer systems in the control centre and the customer automation functions. In addition, the techniques for demand side management are developed and integrated into the automation scheme. The final aim is to demonstrate the automation functions and systems of the scheme in real distribution systems. The results of thirteen projects are now given. These results should be considered intermediate, since most projects will be continued in 1996. (orig.)

  1. EDISON - research programme on electricity distribution automation 1993-1997. Interim report 1995

    Energy Technology Data Exchange (ETDEWEB)

    Lehtonen, M [ed.; VTT Energy, Espoo (Finland). Energy Systems

    1997-12-31

    The report comprises a summary of the results of the first three years of the research programme EDISON on distribution automation in Finnish electrical utilities. The five year research programme (1993-1997) is conducted under the leadership of VTT Energy, in cooperation with universities, distribution companies and the manufacturing industry. The main part of funding is from the Technology Development Centre (Tekes) and from manufacturing companies. The goal of the research programme is to develop a new scheme for a complete distribution automation system, including the network automation, computer systems in the control centre and the customer automation functions. In addition, the techniques for demand side management are developed and integrated into the automation scheme. The final aim is to demonstrate the automation functions and systems of the scheme in real distribution systems. The results of thirteen projects are now given. These results should be considered intermediate, since most projects will be continued in 1996. (orig.)

  2. Electricity demand and conservation potential in the Chinese nonmetallic mineral products industry

    International Nuclear Information System (INIS)

    Lin, Boqiang; Ouyang, Xiaoling

    2014-01-01

    As the high energy-consuming manufacturing industry, electricity consumption of nonmetallic mineral products in China accounted for 7.93% of industrial, 5.84% of national and 1.33% of global electricity consumption in 2010. This study attempts to specify the determinants of sectoral electricity demand, forecast future electricity consumption by creating a model using the Johansen cointegration methodology and estimate the sectoral electricity conservation potential. Results indicate that GDP per capita is the leading force explaining the sectoral electricity consumption increase, while value-added per worker, R and D intensity and electricity price are the main factors contributing to the sectoral electricity consumption decrease. Results demonstrate that sectoral electricity consumption in 2020 will be 369.79–464.83 billion kWh under the low-growth scenario and 530.14–666.39 billion kWh under the high-growth scenario. Moreover, under the low-growth scenario, the sectoral electricity conservation potential in 2020 will be 33.72–95.03 billion kWh, accounting for 0.45–1.26% of China's total electricity demand in 2020; under the high-growth scenario, the sectoral electricity conservation potential in 2020 will be 48.34–136.24 billion kWh, accounting for 0.26–0.74% of world's total electricity consumption in 2010 respectively. Finally, we provide some policy recommendations for encouraging energy conservation in China's nonmetallic mineral products industry. - Highlights: • A long-term relationship of electricity demand in nonmetallic minerals industry is established. • Determinants of the sectoral electricity consumption are specified. • The sectoral electricity demand and saving potential are analyzed using scenarios analysis. • Electricity saving potential will be 48.34–136.24 billion kWh under the high-growth scenario

  3. Impact of Electric Vehicle Charging Station Load on Distribution Network

    Directory of Open Access Journals (Sweden)

    Sanchari Deb

    2018-01-01

    Full Text Available Recent concerns about environmental pollution and escalating energy consumption accompanied by the advancements in battery technology have initiated the electrification of the transportation sector. With the universal resurgence of Electric Vehicles (EVs the adverse impact of the EV charging loads on the operating parameters of the power system has been noticed. The detrimental impact of EV charging station loads on the electricity distribution network cannot be neglected. The high charging loads of the fast charging stations results in increased peak load demand, reduced reserve margins, voltage instability, and reliability problems. Further, the penalty paid by the utility for the degrading performance of the power system cannot be neglected. This work aims to investigate the impact of the EV charging station loads on the voltage stability, power losses, reliability indices, as well as economic losses of the distribution network. The entire analysis is performed on the IEEE 33 bus test system representing a standard radial distribution network for six different cases of EV charging station placement. It is observed that the system can withstand placement of fast charging stations at the strong buses up to a certain level, but the placement of fast charging stations at the weak buses of the system hampers the smooth operation of the power system. Further, a strategy for the placement of the EV charging stations on the distribution network is proposed based on a novel Voltage stability, Reliability, and Power loss (VRP index. The results obtained indicate the efficacy of the VRP index.

  4. Laminated wood as an alternative to wood poles : Engineered wood structures for electric utility and telecommunications industries

    Energy Technology Data Exchange (ETDEWEB)

    Reisdorff, R. [Laminated Wood Systems Inc., Seward, NE (United States)

    2002-07-01

    In this PowerPoint presentation, the author discusses the major advantages of laminated structures, for both the electric and telecommunication industries. The advantages include economy, quick delivery, climbing and field modifications, dimensional uniformity and stability. A series of pictures was displayed which showed the manufacturing process. Laminated structures have a proven history. They were developed in Europe in 1890, and introduced to the United States in 1934. Framing members were introduced in the late 1940s, while poles were introduced in 1963, two years ahead of steel poles. Some of the electrical utility applications include: (1) distribution structures, (2) transmission structures such as single-pole, phase over phase switch structures, tangent structures, and H-Frame construction. The applications for the telecommunication industry consist of joint use structures, such as electric and telecommunication, lighting and telecommunication, overhead telephone and wireless; mono-pole applications; three-pole Bell Towers; and tree poles. Examples of each type were shown. figs.

  5. Pomen managementa na dereguliranem maloprodajnem trgu električne energije v Sloveniji = The Importance of Management in the Deregulated Retail Electricity Distribution Market in Slovenia

    OpenAIRE

    Drago Papler; Stefan Bojnec

    2006-01-01

    This paper underlines the importance of management in the deregulated retail electricity distribution market, entrepreneurship and business behaviours toward consumers’ satisfaction with quality of services. The coefficients of concentration indicate a high concentration of electricity suppliers and users in the deregulated electricity retail market for industry. The production function reveals the importance of education and electricity infrastructure, and to a lesser extent of capital inte...

  6. Spare part management of an electricity distribution network

    Energy Technology Data Exchange (ETDEWEB)

    Lauronen, J.

    1998-07-01

    Electricity distribution companies are required to improve their operational cost effectiveness. The storage systems of the companies have traditionally been based on the 'adequate' number of stores with plenty of different components. Therefore, they are potential objects for cost reduction. The effective operation of spare part management of an electricity distribution network requires that the spare components can be delivered at the fault site quickly in order to avoid excessive outage costs. In a fault situation the stores form a net structure. Currently the rural electricity distribution companies lack suitable methods for designing a spare part storage system. This thesis presents a suitable method for the designing problem. The models assume that faults of a distribution network are stochastic. Therefore, they are best suited for component types installed in large quantities. Improved methods for defining the outage, material and total costs for perpetual order quantity and periodic order-up-to-level storage control systems are described. The method for determining the control parameters of the stores is also presented and ways for finding the necessary initial parameter values are introduced. The developed method is tested in Haemeen Saehko Oy (HSOY). The results of the calculations are given. The key findings are: Small differences in the designing results can increase costs remarkably. For example, in HSOY too low stock levels can result in even eight folds higher outage costs than in the proper design. The best number of stores is not the same for all component types. For example, in HSOY the best number of stores is seven for the 50 kVA transformers and one for the 315 kVA transformers in a summer. If the stock levels are increased the protection against the demand variations is the better the shorter the duration of the review period and/or the replenishment lead time is. (orig.)

  7. Spare part management of an electricity distribution network

    Energy Technology Data Exchange (ETDEWEB)

    Lauronen, J

    1998-07-01

    Electricity distribution companies are required to improve their operational cost effectiveness. The storage systems of the companies have traditionally been based on the 'adequate' number of stores with plenty of different components. Therefore, they are potential objects for cost reduction. The effective operation of spare part management of an electricity distribution network requires that the spare components can be delivered at the fault site quickly in order to avoid excessive outage costs. In a fault situation the stores form a net structure. Currently the rural electricity distribution companies lack suitable methods for designing a spare part storage system. This thesis presents a suitable method for the designing problem. The models assume that faults of a distribution network are stochastic. Therefore, they are best suited for component types installed in large quantities. Improved methods for defining the outage, material and total costs for perpetual order quantity and periodic order-up-to-level storage control systems are described. The method for determining the control parameters of the stores is also presented and ways for finding the necessary initial parameter values are introduced. The developed method is tested in Haemeen Saehko Oy (HSOY). The results of the calculations are given. The key findings are: Small differences in the designing results can increase costs remarkably. For example, in HSOY too low stock levels can result in even eight folds higher outage costs than in the proper design. The best number of stores is not the same for all component types. For example, in HSOY the best number of stores is seven for the 50 kVA transformers and one for the 315 kVA transformers in a summer. If the stock levels are increased the protection against the demand variations is the better the shorter the duration of the review period and/or the replenishment lead time is. (orig.)

  8. Virtual laboratory of electrical mini-grids with distributed generation

    International Nuclear Information System (INIS)

    Menezes Ramos, Vanessa; Barros Galhardo, Marcos André; Oliveira Barbosa, Claudomiro Fábio de; Tavares Pinho, João

    2015-01-01

    This paper presents a computing tool called Virtual Laboratory de Minirredes (Virtual Laboratory of Mini-grids). Using the virtual environment of the developed tool, it is possible to make remote connection/disconnection of switches and loads (resistive, inductive, capacitive and non-linear) at strategic points of the electric mini-grid with hybrid distributed generation systems (solar photovoltaic-diesel). The mini-grid has a length of about 1 km and is installed in the test area of the Grupo de Estudios e Desenvolvimento de Alternativas Exergética (GEDAE) of the Universidade Federal do Pará, located in the city of Belém, Pará, Brazil. The developed tool has communication functions with electric parameters transducers and programmable logic controllers (PLCs). This communication enables the opening and closing of contactors, resulting in different settings for the mini-grid. In addition to that, based on the proposed configuration by the user, the real-time operation status of mini-grid is presented in a graphic interface (for example, monitored electric parameters, distributed generators connected, status of disconnected switches, etc.) and the acquired data is stored. The use of the computing tool also focuses on the construction of a database, in order to obtain knowledge about the mini-grid performance under various conditions that can be set, depending on the operational strategy adopted, based on the choice of the layout, loads and power sources used in the mini-grid. (full text)

  9. Electricity market deregulation and its impact on the nuclear industry

    International Nuclear Information System (INIS)

    Jung, Y.E.; Alfors, G.

    2000-01-01

    Electricity has traditionally been supplied in OECD countries by state-owned facilities, or state-protected monopolies with regulated pricing. More recently, however, several countries have deregulated their electricity markets, thus opening the door to competitive supply and pricing. Deregulation of electricity markets is a trend that is expected to be followed by many countries, and can have a significant impact on the future of nuclear power programmes. (authors)

  10. Overview of U.S. electric utilities: Transmission and distribution systems

    International Nuclear Information System (INIS)

    Brown, R.D.

    1994-01-01

    I hope this brief description of the US electric utility industry has been interesting and informative. No doubt many characteristics, concerns, and research efforts mirror those of the electric utility industry in South Korea. It is hoped that through workshops such as this that electric utilities, manufacturers and consultants may learn from each other for the mutual benefit of all

  11. Low-cost distributed solar-thermal-electric power generation

    Science.gov (United States)

    Der Minassians, Artin; Aschenbach, Konrad H.; Sanders, Seth R.

    2004-01-01

    Due to their high relative cost, solar electric energy systems have yet to be exploited on a widespread basis. It is believed in the energy community that a technology similar to photovoltaic (PV), but offered at about $1/W would lead to widespread deployment at residential and commercial sites. This paper addresses the investigation and feasibility study of a low-cost solar thermal electricity generation technology, suitable for distributed deployment. Specifically, we discuss a system based on nonimaging solar concentrators, integrated with free-piston Stirling engine devices incorporating integrated electric generation. We target concentrator-collector operation at moderate temperatures, in the range of 125°C to 150°C. This temperature is consistent with use of optical concentrators with concentration ratios on the order of 1-2. These low ratio concentrators admit wide angles of radiation acceptance and are thus compatible with no diurnal tracking, and no or only a few seasonal adjustments. Thus, costs and reliability hazards associated with tracking hardware systems are avoided. Further, we note that in the intended application, there is no shortage of incident solar energy, but rather it is the capital cost of the solar-electric system that is most precious. Thus, we outline a strategy for exploiting solar resources in a cost constrained manner. The paper outlines design issues, and a specific design for an appropriately dimensioned free-piston Stirling engine. Only standard low-cost materials and manufacturing methods are required to realize such a machine.

  12. Regulation, Governance and Adaptation. Governance transformations in the Dutch and French liberalizing electricity industries

    International Nuclear Information System (INIS)

    Niesten, E.M.M.I.

    2009-01-01

    For more than a decade, the European governments have focused their energy policies on creating one European competitive electricity market. Several regulations are introduced into the European electricity industries for this purpose: the energy firms have to unbundle the electricity networks from electricity generation and retail, and the consumers should be able to choose their electricity retailer. This thesis analyses which new governance structures emerged in the Dutch and French electricity industries as a result of these regulations for four types of electricity transactions: the network connection, network access, balancing and switching transactions. The parties in these electricity industries did not adopt a market, but hybrid forms of governance that remained extensively regulated. The efficiency of these new governance structures cannot be explained with the attributes of the transactions, as is proposed by transaction cost economics. This thesis therefore introduces the concept of adaptation into transaction cost economics. Adaptation is the adjustment by economic actors from one governance structure to another, and is characterized by three attributes: the identity of the future contracting party, the laterality of the adaption, and the type of response in the adaptation process. These attributes explain the governance transformations and the new governance structures in the two industries. Regulation continues to play a pervasive role in the liberalized electricity industries. It influences the attributes of the transactions, the new governance structures and the adaptation process.

  13. Regulation, Governance and Adaptation. Governance transformations in the Dutch and French liberalizing electricity industries

    Energy Technology Data Exchange (ETDEWEB)

    Niesten, E.M.M.I.

    2009-06-11

    For more than a decade, the European governments have focused their energy policies on creating one European competitive electricity market. Several regulations are introduced into the European electricity industries for this purpose: the energy firms have to unbundle the electricity networks from electricity generation and retail, and the consumers should be able to choose their electricity retailer. This thesis analyses which new governance structures emerged in the Dutch and French electricity industries as a result of these regulations for four types of electricity transactions: the network connection, network access, balancing and switching transactions. The parties in these electricity industries did not adopt a market, but hybrid forms of governance that remained extensively regulated. The efficiency of these new governance structures cannot be explained with the attributes of the transactions, as is proposed by transaction cost economics. This thesis therefore introduces the concept of adaptation into transaction cost economics. Adaptation is the adjustment by economic actors from one governance structure to another, and is characterized by three attributes: the identity of the future contracting party, the laterality of the adaption, and the type of response in the adaptation process. These attributes explain the governance transformations and the new governance structures in the two industries. Regulation continues to play a pervasive role in the liberalized electricity industries. It influences the attributes of the transactions, the new governance structures and the adaptation process.

  14. Industrial and institutional restructuring of the Russian electricity sector: Status and issues

    International Nuclear Information System (INIS)

    Engoian, Alda

    2006-01-01

    The reform of the Russian electricity industry represents one of the largest and most technically complex post-Soviet era industrial restructurings. This paper presents the framework, status, and perspectives for the Russian electricity sector liberalisation. Uncertainties regarding the effective implementation of the reform are specifically examined. Ultimately the critical analysis of the reform questions the feasibility and adequacy of the recommended measures in the specific Russian context. Current theories fail to answer a fundamental issue, namely how to promote investment in an obsolete electrical infrastructure and, more generally, whether a pure free market model is compatible with physical constraints posed by the electricity sector. A careless deregulation of the Russian electricity system could hinder the country's stable and sustainable development, as its economy and the population's service have traditionally been closely linked to the electricity industry

  15. Industrial and institutional restructuring of the Russian electricity sector: status and issues

    International Nuclear Information System (INIS)

    Engoian, A.

    2006-01-01

    The reform of the Russian electricity industry represents one of the largest and most technically complex post-Soviet era industrial restructurings. This paper presents the framework, status, and perspectives for the Russian electricity sector liberalisation. Uncertainties regarding the effective implementation of the reform are specifically examined. Ultimately the critical analysis of the reform questions the feasibility and adequacy of the recommended measures in the specific Russian context. Current theories fail to answer a fundamental issue, namely how to promote investment in an obsolete electrical infrastructure and, more generally, whether a pure free market model is compatible with physical constraints posed by the electricity sector. A careless deregulation of the Russian electricity system could hinder the country's stable and sustainable development, as its economy and the population's service have traditionally been closely linked to the electricity industry. (author)

  16. Network cost in transmission and distribution of electric power; Naetkostnader i oeverfoering och distribution av el

    Energy Technology Data Exchange (ETDEWEB)

    Lindahl, A; Naeslund, B; Oettinger-Biberg, C; Olander, H; Wuolikainen, T; Fritz, P

    1994-12-31

    This report is divided in two parts, where part 1 treats the charges on the regional nets with special emphasis on the net owners tariffs on a deregulated market. Part 2 describes the development of the network costs in electric power distribution for the period 1991-1993. 11 figs, 33 tabs

  17. Integrated Computing, Communication, and Distributed Control of Deregulated Electric Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Bajura, Richard; Feliachi, Ali

    2008-09-24

    Restructuring of the electricity market has affected all aspects of the power industry from generation to transmission, distribution, and consumption. Transmission circuits, in particular, are stressed often exceeding their stability limits because of the difficulty in building new transmission lines due to environmental concerns and financial risk. Deregulation has resulted in the need for tighter control strategies to maintain reliability even in the event of considerable structural changes, such as loss of a large generating unit or a transmission line, and changes in loading conditions due to the continuously varying power consumption. Our research efforts under the DOE EPSCoR Grant focused on Integrated Computing, Communication and Distributed Control of Deregulated Electric Power Systems. This research is applicable to operating and controlling modern electric energy systems. The controls developed by APERC provide for a more efficient, economical, reliable, and secure operation of these systems. Under this program, we developed distributed control algorithms suitable for large-scale geographically dispersed power systems and also economic tools to evaluate their effectiveness and impact on power markets. Progress was made in the development of distributed intelligent control agents for reliable and automated operation of integrated electric power systems. The methodologies employed combine information technology, control and communication, agent technology, and power systems engineering in the development of intelligent control agents for reliable and automated operation of integrated electric power systems. In the event of scheduled load changes or unforeseen disturbances, the power system is expected to minimize the effects and costs of disturbances and to maintain critical infrastructure operational.

  18. Using neural networks and extreme value distributions to model electricity pool prices: Evidence from the Australian National Electricity Market 1998–2013

    International Nuclear Information System (INIS)

    Dev, Priya; Martin, Michael A.

    2014-01-01

    Highlights: • Neural nets are unable to properly capture spiky price behavior found in the electricity market. • We modeled electricity price data from the Australian National Electricity Market over 15 years. • Neural nets need to be augmented with other modeling techniques to capture price spikes. • We fit a Generalized Pareto Distribution to price spikes using a peaks-over-thresholds approach. - Abstract: Competitors in the electricity supply industry desire accurate predictions of electricity spot prices to hedge against financial risks. Neural networks are commonly used for forecasting such prices, but certain features of spot price series, such as extreme price spikes, present critical challenges for such modeling. We investigate the predictive capacity of neural networks for electricity spot prices using Australian National Electricity Market data. Following neural net modeling of the data, we explore extreme price spikes through extreme value modeling, fitting a Generalized Pareto Distribution to price peaks over an estimated threshold. While neural nets capture the smoother aspects of spot price data, they are unable to capture local, volatile features that characterize electricity spot price data. Price spikes can be modeled successfully through extreme value modeling

  19. Passive elimination of static electricity in oil industry

    Directory of Open Access Journals (Sweden)

    Gaćanović Mićo

    2014-01-01

    Full Text Available This study explains the existing and real conditions of a possible passive elimination of static electricity when loading oil and oil derivatives. We are considering the formation and survival of gas bubbles both in the volume of oil in its depth, but also at the surface of oil and oil derivatives of the partly filled reservoir, and formation of both volume and surface electric charge in oil and oil derivatives. The study presents the research of formation and survival of static electricity in both reservoirs and tank trucks of different geometric shapes partly filled with oil and oil derivatives. We are proposing a new original possibility of passive elimination of static electricity when loading oil and oil derivatives in reservoirs and tank trucks. The proposed passive device for elimination of static electricity is protected at the international level in the domain of intellectual property (with a patent, model and distinctive mark.

  20. Resbuffling of the electric power industries: internationalization new players, diversification

    International Nuclear Information System (INIS)

    Chevalier, J.M.; Salaun, D.

    1995-01-01

    The changes that are being brought in the forms of organization of the power industry lead to a global restructuring of the industry. Traditional players are forced to redefine their strategies concerning vertical and horizontal integration and also diversification. They tend to internationalize their business but they are facing aggressive new-comers. The future structure of the industry is not yet determined but there will be a great number of very different corporate players. (authors). 1 fig

  1. Renewable Electricity Use by the U.S. Information and Communication Technology (ICT) Industry

    Energy Technology Data Exchange (ETDEWEB)

    Miller, John [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bird, Lori [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Heeter, Jenny [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Gorham, Bethany [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-07-20

    The information and communication technology (ICT) sector continues to witness rapid growth and uptake of ICT equipment and services at both the national and global levels. The electricity consumption associated with this expansion is substantial, although recent adoptions of cloudcomputing services, co-location data centers, and other less energy-intensive equipment and operations have likely reduced the rate of growth in this sector. This paper is intended to aggregate existing ICT industry data and research to provide an initial look at electricity use, current and future renewable electricity acquisition, as well as serve as a benchmark for future growth and trends in ICT industry renewable electricity consumption.

  2. Incorporating network effects in a competitive electricity industry. An Australian perspective

    International Nuclear Information System (INIS)

    Outhred, H.; Kaye, J.

    1996-01-01

    The role of an electricity network in a competitive electricity industry is reviewed, the nation's experience with transmission pricing is discussed, and a 'Nodal Auction Model' for incorporating network effects in a competitive electricity industry is proposed. The model uses a computer-based auction procedure to address both the spatial issues associated with an electricity network and the temporal issues associated with operation scheduling. The objective is to provide a market framework that addresses both network effects and operation scheduling in a coordinated implementation of spot pricing theory. 12 refs

  3. Information report on electricity distribution network security and financing

    International Nuclear Information System (INIS)

    2011-01-01

    This report first outlines the degradation of electricity quality, and identifies the lack of investment as the main reason of the network weakness. It notices that the French network is much extended, and that the medium and low voltage networks need to be secured, and outlines that some legal measures have already been implemented to correct these problems. In its second part, the report comments the network manager's point of view, and denies his critics of the conceding authorities. It also discusses the network manager's investments, and finally formulates six propositions for a better future of the distribution network

  4. Aeroelastic Analysis of a Distributed Electric Propulsion Wing

    Science.gov (United States)

    Massey, Steven J.; Stanford, Bret K.; Wieseman, Carol D.; Heeg, Jennifer

    2017-01-01

    An aeroelastic analysis of a prototype distributed electric propulsion wing is presented. Results using MSC Nastran (Registered Trademark) doublet lattice aerodynamics are compared to those based on FUN3D Reynolds Averaged Navier- Stokes aerodynamics. Four levels of grid refinement were examined for the FUN3D solutions and solutions were seen to be well converged. It was found that no oscillatory instability existed, only that of divergence, which occurred in the first bending mode at a dynamic pressure of over three times the flutter clearance condition.

  5. Exploring Distributed Energy Alternatives to Electrical Distribution Grid Expansion in Souhern California Edison Service Territory

    Energy Technology Data Exchange (ETDEWEB)

    Stovall, Therese K [ORNL; Kingston, Tim [Gas Technology Institute

    2005-12-01

    Distributed energy (DE) technologies have received much attention for the energy savings and electric power reliability assurances that may be achieved by their widespread adoption. Fueling the attention have been the desires to globally reduce greenhouse gas emissions and concern about easing power transmission and distribution system capacity limitations and congestion. However, these benefits may come at a cost to the electric utility companies in terms of lost revenue and concerns with interconnection on the distribution system. This study assesses the costs and benefits of DE to both consumers and distribution utilities and expands upon a precursory study done with Detroit Edison (DTE)1, by evaluating the combined impact of DE, energy-efficiency, photovoltaics (a use of solar energy), and demand response that will shape the grid of the future. This study was funded by the U.S. Department of Energy (DOE), Gas Research Institute (GRI), American Electric Power (AEP), and Gas Technology Institute's (GTI) Distributed Energy Collaborative Program (DECP). It focuses on two real Southern California Edison (SCE) circuits, a 13 MW suburban circuit fictitiously named Justice on the Lincoln substation, and an 8 MW rural circuit fictitiously named Prosper on the Washington Substation. The primary objectives of the study were threefold: (1) Evaluate the potential for using advanced energy technologies, including DE, energy-efficiency (EE), demand response, electricity storage, and photovoltaics (PV), to reshape electric load curves by reducing peak demand, for real circuits. (2) Investigate the potential impact on guiding technology deployment and managing operation in a way that benefits both utilities and their customers by: (a) Improving grid load factor for utilities; (b) Reducing energy costs for customers; and (c) Optimizing electric demand growth. (3) Demonstrate benefits by reporting on a recently installed advanced energy system at a utility customer site

  6. Generic Virtual Power Plants: Management of Distributed Energy Resources under Liberalized Electricity Market

    DEFF Research Database (Denmark)

    You, Shi; Træholt, Chresten; Poulsen, Bjarne

    2009-01-01

    The emergence of Virtual Power Plant (VPP) can be attributed to the major boost of distributed energy resources (DER), which satisfies the changing needs of modern society on energy industry. Based on this concept, DER units disregarding the differences in each individualtechnology are loosely...... aggregated with a unique interface to the external grid and energy market. This paper gives a broad overview of state-of-the-art VPP concepts and proposes a detailed generic VPP (GVPP) model running in liberalized electricity market environment. An attempt is made to provide an outline of the main functions...

  7. The impact of the government policy on the Chinese electric gehicle industry and business strategy management : Case of FAW

    OpenAIRE

    Li, Zhe; Lu, Sun

    2011-01-01

    Background: The electric vehicle industry is an emerging industry worldwide. In China the development of the electric vehicle industry is rapid. The government policy is of great influence on the economy in the Chinese context. The Chinese electric vehicle company has to design the right business strategy to maintain and enhance its competitive advantages in order to respond to challenges. Aim: This study analyzes the five competitive forces of the Chinese electric vehicle industry and the ef...

  8. The impact of ICT investment and energy price on industrial electricity demand: Dynamic growth model approach

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Youngsang; Lee, Jongsu; Kim, Tai-Yoo [Technology Management, Economics and Policy Program, College of Engineering, Seoul National University, Shillim-Dong San56-1, Gwanak-Ku, Seoul 151-742 (Korea)

    2007-09-15

    The authors investigate the effects of information and communications technology (ICT) investment, electricity price, and oil price on the consumption of electricity in South Korea's industries using a logistic growth model. The concept electricity intensity is used to explain electricity consumption patterns. An empirical analysis implies that ICT investment in manufacturing industries that normally consume relatively large amounts of electricity promotes input factor substitution away from the labor intensive to the electricity intensive. Moreover, results also suggest that ICT investment in some specific manufacturing sectors is conducive to the reduction of electricity consumption, whereas ICT investment in the service sector and most manufacturing sectors increases electricity consumption. It is concluded that electricity prices critically affect electricity consumption in half of South Korea's industrial sectors, but not in the other half, a finding that differs somewhat from previous research results. Reasons are suggested to explain why the South Korean case is so different. Policymakers may find this study useful, as it answers the question of whether ICT investment can ultimately reduce energy consumption and may aid in planning the capacity of South Korea's national electric power. (author)

  9. The impact of ICT investment and energy price on industrial electricity demand: Dynamic growth model approach

    International Nuclear Information System (INIS)

    Cho, Youngsang; Lee, Jongsu; Kim, Tai-Yoo

    2007-01-01

    The authors investigate the effects of information and communications technology (ICT) investment, electricity price, and oil price on the consumption of electricity in South Korea's industries using a logistic growth model. The concept electricity intensity is used to explain electricity consumption patterns. An empirical analysis implies that ICT investment in manufacturing industries that normally consume relatively large amounts of electricity promotes input factor substitution away from the labor intensive to the electricity intensive. Moreover, results also suggest that ICT investment in some specific manufacturing sectors is conducive to the reduction of electricity consumption, whereas ICT investment in the service sector and most manufacturing sectors increases electricity consumption. It is concluded that electricity prices critically affect electricity consumption in half of South Korea's industrial sectors, but not in the other half, a finding that differs somewhat from previous research results. Reasons are suggested to explain why the South Korean case is so different. Policymakers may find this study useful, as it answers the question of whether ICT investment can ultimately reduce energy consumption and may aid in planning the capacity of South Korea's national electric power. (author)

  10. Methods to Regulate Unbundled Transmission and Distribution Business on Electricity Markets

    International Nuclear Information System (INIS)

    Forsberg, Kaj; Fritz, Peter

    2003-11-01

    The regulation of distribution utilities is evolving from the traditional approach based on a cost of service or rate of return remuneration, to ways of regulation more specifically focused on providing incentives for improving efficiency, known as performance-based regulation or ratemaking. Modern regulation systems are also, to a higher degree than previously, intended to simulate competitive market conditions. The Market Design 2003-conference gathered people from 18 countries to discuss 'Methods to regulate unbundled transmission and distribution business on electricity markets'. Speakers from nine different countries and backgrounds (academics, industry and regulatory) presented their experiences and most recent works on how to make the regulation of unbundled distribution business as accurate as possible. This paper does not claim to be a fully representative summary of everything that was presented or discussed during the conference. Rather, it is a purposely restricted document where we focus on a few central themes and experiences from different countries

  11. Methods to Regulate Unbundled Transmission and Distribution Business on Electricity Markets

    Energy Technology Data Exchange (ETDEWEB)

    Forsberg, Kaj; Fritz, Peter

    2003-11-01

    The regulation of distribution utilities is evolving from the traditional approach based on a cost of service or rate of return remuneration, to ways of regulation more specifically focused on providing incentives for improving efficiency, known as performance-based regulation or ratemaking. Modern regulation systems are also, to a higher degree than previously, intended to simulate competitive market conditions. The Market Design 2003-conference gathered people from 18 countries to discuss 'Methods to regulate unbundled transmission and distribution business on electricity markets'. Speakers from nine different countries and backgrounds (academics, industry and regulatory) presented their experiences and most recent works on how to make the regulation of unbundled distribution business as accurate as possible. This paper does not claim to be a fully representative summary of everything that was presented or discussed during the conference. Rather, it is a purposely restricted document where we focus on a few central themes and experiences from different countries.

  12. Distributed resources and re-regulated electricity markets

    International Nuclear Information System (INIS)

    Ackermann, Thomas

    2007-01-01

    This paper briefly defines distributed resources (DR) and discusses the current status of DR. The main focus is on discussing the value DR can provide to re-regulated electricity markets. DR can, under certain circumstances, help to significantly reduce the main problem of re-regulation, i.e. market power. Distributed generation and demand-side resources may, even if only small quantities in terms of size of the entire market are utilised, be able to help to significantly reduce market power. This results in a significantly more efficient market. To achieve such benefits, however, DR must be in operation during times when market power issues are likely to arise. To a certain extent this is the case as demand-side resources are usually independent of established generation companies. In addition, many business cases for DG require DG to actually operate to capture the second revenue. (author)

  13. The cost of electricity distribution in Italy: a quantitative analysis

    International Nuclear Information System (INIS)

    Scarpa, C.

    1998-01-01

    This paper presents a quantitative analysis of the cost of medium and low tension electricity distribution in Italy. An econometric analysis of the cost function is proposed, on the basis of data on 147 zones of the dominant firm, ENEL. Data are available only for 1996, which has forced to carry out only a cross-section OLS analysis. The econometric estimate shows the existence of significant scale economies, that the current organisational structure does not exploit. On this basis is also possible to control to what extent exogenous cost drivers affect costs. The role of numerous exogenous factors considered seems however quite limited. The area of the distribution zone and an indicator of quality are the only elements that appear significant from an economic viewpoint [it

  14. Using ELECTRE TRI to support maintenance of water distribution networks

    Directory of Open Access Journals (Sweden)

    Flavio Trojan

    2012-08-01

    Full Text Available Problems encountered in the context of the maintenance management of water supply are evidenced by the lack of decision support models which gives a manager overview of the system. This paper, therefore, develops a model that uses, in its framework, the multicriteria outranking method ELECTRE TRI. The objective is to sort the areas of water flow measurement of a water distribution network, by priority of maintenance, with data collected from an automated system of abnormalities detection. This sorting is designed to support maintenance decisions in terms of the measure more appropriate to be applied per region. To illustrate the proposed model, an application was performed in a city with 100 thousand water connections. With this model it becomes possible to improve the allocation of maintenance measures for regions and mainly to improve the operation of the distribution network.

  15. Agent Based Control of Electric Power Systems with Distributed Generation

    DEFF Research Database (Denmark)

    Saleem, Arshad

    and subsystems that are able to coordinate, communicate, cooperate, adapt to emerging situations and self organize in an intelligent way. At the same time, rapid development in information and and communication technologies (ICT) have brought new opportunities and elucidations. New Technologies and standards...... control strategies. The results have been discussed from case studies of multiagent based distributed control scenarios in electric power systems. The main contribution of this work is a proposal for system design methodology for application of intelligent agent technology in power systems....... Situation in Denmark is even more interesting, with a current 20% penetration of wind energy it is moving towards an ambitious goal of 50% penetration by the year 2050. Realization of these concepts requires that power systems should be of distributed nature { consisting of autonomous components...

  16. Electricity in lieu of nautral gas and oil for industrial thermal energy: a preliminary survey

    Energy Technology Data Exchange (ETDEWEB)

    Tallackson, J. R.

    1979-02-01

    In 1974, industrial processors accounted for nearly 50% of the nation's natural gas consumption and nearly 20% of its consumption of petroleum. This report is a preliminary assessment of the potential capability of the process industries to substitute utility-generated electricity for these scarce fuels. It is tacitly assumed that virtually all public utilities will soon be relying on coal or nuclear fission for primary energy. It was concluded that the existing technology will permit substitution of electricity for approximately 75% of the natural gas and petroleum now being consumed by industrial processors, which is equivalent to an annual usage of 800 million barrels of oil and 9 trillion cubic feet of gas at 1974 levels. Process steam generation, used throughout industry and representing 40% of its energy usage, offers the best near-term potential for conversion to electricity. Electric boilers and energy costs for steam are briefly discussed. Electrically driven heat pumps are considered as a possible method to save additional low-grade energy. Electrical reheating at high temperatures in the primary metals sector will be an effective way to conserve gas and oil. A wholesale shift by industry to electricity to replace gas and oil will produce impacts on the public utilities and, perhaps, those of a more general socio-economic nature. The principal bar to large-scale electrical substitution is economics, not technology. 174 references.

  17. Architecture, Voltage, and Components for a Turboelectric Distributed Propulsion Electric Grid

    Science.gov (United States)

    Armstrong, Michael J.; Blackwelder, Mark; Bollman, Andrew; Ross, Christine; Campbell, Angela; Jones, Catherine; Norman, Patrick

    2015-01-01

    The development of a wholly superconducting turboelectric distributed propulsion system presents unique opportunities for the aerospace industry. However, this transition from normally conducting systems to superconducting systems significantly increases the equipment complexity necessary to manage the electrical power systems. Due to the low technology readiness level (TRL) nature of all components and systems, current Turboelectric Distributed Propulsion (TeDP) technology developments are driven by an ambiguous set of system-level electrical integration standards for an airborne microgrid system (Figure 1). While multiple decades' worth of advancements are still required for concept realization, current system-level studies are necessary to focus the technology development, target specific technological shortcomings, and enable accurate prediction of concept feasibility and viability. An understanding of the performance sensitivity to operating voltages and an early definition of advantageous voltage regulation standards for unconventional airborne microgrids will allow for more accurate targeting of technology development. Propulsive power-rated microgrid systems necessitate the introduction of new aircraft distribution system voltage standards. All protection, distribution, control, power conversion, generation, and cryocooling equipment are affected by voltage regulation standards. Information on the desired operating voltage and voltage regulation is required to determine nominal and maximum currents for sizing distribution and fault isolation equipment, developing machine topologies and machine controls, and the physical attributes of all component shielding and insulation. Voltage impacts many components and system performance.

  18. Electric power economy in industry and commerce II

    International Nuclear Information System (INIS)

    Mamede Filho, J.

    1988-01-01

    The acts of electric power economy in Brazil are studied, including the improvement of load factor, maintain a high power-factor and use of monthly consumption method and medium powers method. (author)

  19. Meeting the challenges of the new energy industry: The driving forces facing electric power generators and the natural gas industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The proceedings of the IGT national conference on meeting the challenges of the New Energy Industry: The driving forces facing Electric Power Generators and the Natural Gas Industry are presented. The conference was held June 19-21, 1995 at the Ambassador West Hotel in Downtown Chicago, Illinois. A separate abstract and indexing for each of the 18 papers presented for inclusion in the Energy Science and Technology Database.

  20. Meeting the challenges of the new energy industry: The driving forces facing electric power generators and the natural gas industry

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    The proceedings of the IGT national conference on meeting the challenges of the New Energy Industry: The driving forces facing Electric Power Generators and the Natural Gas Industry are presented. The conference was held June 19-21, 1995 at the Ambassador West Hotel in Downtown Chicago, Illinois. A separate abstract and indexing for each of the 18 papers presented for inclusion in the Energy Science and Technology Database

  1. A Heuristic Approach to Distributed Generation Source Allocation for Electrical Power Distribution Systems

    Directory of Open Access Journals (Sweden)

    M. Sharma

    2010-12-01

    Full Text Available The recent trends in electrical power distribution system operation and management are aimed at improving system conditions in order to render good service to the customer. The reforms in distribution sector have given major scope for employment of distributed generation (DG resources which will boost the system performance. This paper proposes a heuristic technique for allocation of distribution generation source in a distribution system. The allocation is determined based on overall improvement in network performance parameters like reduction in system losses, improvement in voltage stability, improvement in voltage profile. The proposed Network Performance Enhancement Index (NPEI along with the heuristic rules facilitate determination of feasible location and corresponding capacity of DG source. The developed approach is tested with different test systems to ascertain its effectiveness.

  2. Chattanooga Electric Power Board Case Study Distribution Automation

    Energy Technology Data Exchange (ETDEWEB)

    Glass, Jim [Chattanooga Electric Power Board (EPB), TN (United States); Melin, Alexander M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Starke, Michael R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ollis, Ben [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-10-01

    In 2009, the U.S. Department of Energy under the American Recovery and Reinvestment Act (ARRA) awarded a grant to the Chattanooga, Tennessee, Electric Power Board (EPB) as part of the Smart Grid Investment Grant Program. The grant had the objective “to accelerate the transformation of the nation’s electric grid by deploying smart grid technologies.” This funding award enabled EPB to expedite the original smart grid implementation schedule from an estimated 10-12 years to 2.5 years. With this funding, EPB invested heavily in distribution automation technologies including installing over 1,200 automated circuit switches and sensors on 171 circuits. For utilities considering a commitment to distribution automation, there are underlying questions such as the following: “What is the value?” and “What are the costs?” This case study attempts to answer these questions. The primary benefit of distribution automation is increased reliability or reduced power outage duration and frequency. Power outages directly impact customer economics by interfering with business functions. In the past, this economic driver has been difficult to effectively evaluate. However, as this case study demonstrates, tools and analysis techniques are now available. In this case study, the impact on customer costs associated with power outages before and after the implementation of distribution automation are compared. Two example evaluations are performed to demonstrate the benefits: 1) a savings baseline for customers under normal operations1 and 2) customer savings for a single severe weather event. Cost calculations for customer power outages are performed using the US Department of Energy (DOE) Interruption Cost Estimate (ICE) calculator2. This tool uses standard metrics associated with outages and the customers to calculate cost impact. The analysis shows that EPB customers have seen significant reliability improvements from the implementation of distribution automation. Under

  3. Economic impacts of power electronics on electricity distribution systems

    International Nuclear Information System (INIS)

    Duarte, Carlos Henrique; Schaeffer, Roberto

    2010-01-01

    To achieve more efficient energy use, power electronics (PEs) may be employed. However, these introduce nonlinear loads (NLLs) into the system by generating undesired frequencies that are harmonic in relation to (multiples of) the fundamental frequency (60 Hz in Brazil). Consequently, devices using PEs are more efficient but also contribute significantly to degradation of power quality. Besides this, both the conventional rules on design and operation of power systems and the usual premises followed in energy efficiency programs (without mentioning the electricity consumed by the devices themselves) consider the sinusoidal voltage and current waveforms at the fixed fundamental frequency of the power grid. Thus, analysis of electricity consumption reductions in energy efficiency programs that include the use of PEs considers the reduction of kWh to the final consumer but not the additional losses caused by the increase in harmonic distortion. This article contributes to a better understanding of this problem by reporting the results of a case study of the ownership and use of television sets (TV sets) to estimate the economic impacts of residential PEs on a mainly residential electricity distribution system. (author)

  4. 76 FR 71577 - Guidance for Industry on Medication Guide Distribution Requirements and Inclusion of Medication...

    Science.gov (United States)

    2011-11-18

    ...] Guidance for Industry on Medication Guide Distribution Requirements and Inclusion of Medication Guides in... guidance for industry entitled ``Medication Guides-- Distribution Requirements and Inclusion in Risk... Requirements and Inclusion in Risk Evaluation and Mitigation Strategies (REMS).'' This guidance provides...

  5. History of electricity network control and distributed generation in the UK and Western Denmark

    International Nuclear Information System (INIS)

    Lehtonen, Markku; Nye, Sheridan

    2009-01-01

    Achieving the ambitious targets for renewable electricity generation in Europe will require harnessing a diverse range of energy sources, many of which are decentralised, small scale, and will be connected directly to the distribution networks. To control the two-way flows of electricity, the current passive network configurations will need to be replaced by active network management. This will require, in particular, innovations in intelligent IT-based network control. This paper draws on research on Large Technical Systems (LTS) and control systems in other sectors to analyse the evolution of electricity network control in western Denmark and the UK, since the Second World War. It concludes that lack of progress in network control has only recently-largely because of the combined needs to provide greater reliability and 'green' electricity within liberalised markets-emerged as a 'reverse salient' that will prevent the further development of the LTS of electricity supply industry towards desired direction. Breaking the inertia in the LTS and its control systems will require determined government action to promote learning and collaborative search for solutions. The UK might well draw lessons from the Danish pragmatism in fostering innovation through targeted support to collaborative R and D efforts towards sustainability objectives.

  6. History of electricity network control and distributed generation in the UK and Western Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Lehtonen, Markku [Sussex Energy Group, SPRU, University of Sussex, Freeman Centre, Falmer, Brighton, East Sussex BN1 9QE (United Kingdom); Nye, Sheridan [SPRU, University of Sussex, Freeman Centre, Falmer, Brighton, East Sussex BN1 9QE (United Kingdom)

    2009-06-15

    Achieving the ambitious targets for renewable electricity generation in Europe will require harnessing a diverse range of energy sources, many of which are decentralised, small scale, and will be connected directly to the distribution networks. To control the two-way flows of electricity, the current passive network configurations will need to be replaced by active network management. This will require, in particular, innovations in intelligent IT-based network control. This paper draws on research on Large Technical Systems (LTS) and control systems in other sectors to analyse the evolution of electricity network control in western Denmark and the UK, since the Second World War. It concludes that lack of progress in network control has only recently - largely because of the combined needs to provide greater reliability and 'green' electricity within liberalised markets - emerged as a 'reverse salient' that will prevent the further development of the LTS of electricity supply industry towards desired direction. Breaking the inertia in the LTS and its control systems will require determined government action to promote learning and collaborative search for solutions. The UK might well draw lessons from the Danish pragmatism in fostering innovation through targeted support to collaborative R and D efforts towards sustainability objectives. (author)

  7. Linearized image reconstruction method for ultrasound modulated electrical impedance tomography based on power density distribution

    International Nuclear Information System (INIS)

    Song, Xizi; Xu, Yanbin; Dong, Feng

    2017-01-01

    Electrical resistance tomography (ERT) is a promising measurement technique with important industrial and clinical applications. However, with limited effective measurements, it suffers from poor spatial resolution due to the ill-posedness of the inverse problem. Recently, there has been an increasing research interest in hybrid imaging techniques, utilizing couplings of physical modalities, because these techniques obtain much more effective measurement information and promise high resolution. Ultrasound modulated electrical impedance tomography (UMEIT) is one of the newly developed hybrid imaging techniques, which combines electric and acoustic modalities. A linearized image reconstruction method based on power density is proposed for UMEIT. The interior data, power density distribution, is adopted to reconstruct the conductivity distribution with the proposed image reconstruction method. At the same time, relating the power density change to the change in conductivity, the Jacobian matrix is employed to make the nonlinear problem into a linear one. The analytic formulation of this Jacobian matrix is derived and its effectiveness is also verified. In addition, different excitation patterns are tested and analyzed, and opposite excitation provides the best performance with the proposed method. Also, multiple power density distributions are combined to implement image reconstruction. Finally, image reconstruction is implemented with the linear back-projection (LBP) algorithm. Compared with ERT, with the proposed image reconstruction method, UMEIT can produce reconstructed images with higher quality and better quantitative evaluation results. (paper)

  8. Distribution and Source Identification of Pb Contamination in industrial soil

    Science.gov (United States)

    Ko, M. S.

    2017-12-01

    INTRODUCTION Lead (Pb) is toxic element that induce neurotoxic effect to human, because competition of Pb and Ca in nerve system. Lead is classified as a chalophile element and galena (PbS) is the major mineral. Although the Pb is not an abundant element in nature, various anthropogenic source has been enhanced Pb enrichment in the environment after the Industrial Revolution. The representative anthropogenic sources are batteries, paint, mining, smelting, and combustion of fossil fuel. Isotope analysis widely used to identify the Pb contamination source. The Pb has four stable isotopes that are 208Pb, 207Pb, 206Pb, and 204Pb in natural. The Pb is stable isotope and the ratios maintain during physical and chemical fractionation. Therefore, variations of Pb isotope abundance and relative ratios could imply the certain Pb contamination source. In this study, distributions and isotope ratios of Pb in industrial soil were used to identify the Pb contamination source and dispersion pathways. MATERIALS AND METHODS Soil samples were collected at depth 0­-6 m from an industrial area in Korea. The collected soil samples were dried and sieved under 2 mm. Soil pH, aqua-regia digestion and TCLP carried out using sieved soil sample. The isotope analysis was carried out to determine the abundance of Pb isotope. RESULTS AND DISCUSSION The study area was developed land for promotion of industrial facilities. The study area was forest in 1980, and the satellite image show the alterations of land use with time. The variations of land use imply the possibilities of bringing in external contaminated soil. The Pb concentrations in core samples revealed higher in lower soil compare with top soil. Especially, 4 m soil sample show highest Pb concentrations that are approximately 1500 mg/kg. This result indicated that certain Pb source existed at 4 m depth. CONCLUSIONS This study investigated the distribution and source identification of Pb in industrial soil. The land use and Pb

  9. A Monte Carlo based decision-support tool for assessing generation portfolios in future carbon constrained electricity industries

    International Nuclear Information System (INIS)

    Vithayasrichareon, Peerapat; MacGill, Iain F.

    2012-01-01

    This paper presents a novel decision-support tool for assessing future generation portfolios in an increasingly uncertain electricity industry. The tool combines optimal generation mix concepts with Monte Carlo simulation and portfolio analysis techniques to determine expected overall industry costs, associated cost uncertainty, and expected CO 2 emissions for different generation portfolio mixes. The tool can incorporate complex and correlated probability distributions for estimated future fossil-fuel costs, carbon prices, plant investment costs, and demand, including price elasticity impacts. The intent of this tool is to facilitate risk-weighted generation investment and associated policy decision-making given uncertainties facing the electricity industry. Applications of this tool are demonstrated through a case study of an electricity industry with coal, CCGT, and OCGT facing future uncertainties. Results highlight some significant generation investment challenges, including the impacts of uncertain and correlated carbon and fossil-fuel prices, the role of future demand changes in response to electricity prices, and the impact of construction cost uncertainties on capital intensive generation. The tool can incorporate virtually any type of input probability distribution, and support sophisticated risk assessments of different portfolios, including downside economic risks. It can also assess portfolios against multi-criterion objectives such as greenhouse emissions as well as overall industry costs. - Highlights: ► Present a decision support tool to assist generation investment and policy making under uncertainty. ► Generation portfolios are assessed based on their expected costs, risks, and CO 2 emissions. ► There is tradeoff among expected cost, risks, and CO 2 emissions of generation portfolios. ► Investment challenges include economic impact of uncertainties and the effect of price elasticity. ► CO 2 emissions reduction depends on the mix of

  10. Region-specific study of the electric utility industry. Phase I, final report

    International Nuclear Information System (INIS)

    Wacaster, A.J.

    1985-07-01

    This report describes the financial background of the electric utility industry in VACAR, reports on the present condition of the industry and then assesses the future of this industry. The Virginia-Carolinas subregion (VACAR) of the Southeastern Electric Reliability Council (SERC) was selected for this regional study because of its cooperativeness and its representative mix of powerplants, for example coal, hydro, nuclear, oil. It was found that the supply of future economic electricity is in jeopardy because of the regulatory process, the increasing risk associated with large scale generating stations and the weakening of the nuclear option. A number of options for the future were considered, including deregulation, government ownership and retaining the present system with modifications. The option selected to improve the present condition of the electricity industry was to make the present system work. The present system is sound, and with modifications, problems could be solved within the existing framework. 8 figs., 4 tabs

  11. 100 Area electrical distribution fault and coordination report

    International Nuclear Information System (INIS)

    Webber, J.J.

    1994-01-01

    This report documents three-phase and line-to-ground fault values and time overcurrent coordination curves for the electrical utility distribution system located in the 100 Areas. Activities that may improve the coordination of the distribution system have also been identified. An evaluation of system coordination was performed. The results of this evaluation are listed in Appendix B. There are protective devices within the 100 Area distribution system that do not coordinate with one another throughout the Areas. There is also a mis-application of reclosing relays at the 100B Area. The impact of the mis-coordination and incorrect application of reclosing relays is that system selectivity is reduced. Equipment will still be protected against damaging currents, however more equipment will be de-energized than necessary during fault conditions. It is the opinion of the author of this report that the cases of mis-coordination listed above, and in Appendix B, do not significantly degrade the system protection system nor the reliability of the 100 Area distribution system. Therefore, immediate response to correct these problems is not recommended. However, a planned methodology, outlined in an Activity Plan, to correct these problems should be developed and implemented in the near future

  12. A novel optimal distribution system planning framework implementing distributed generation in a deregulated electricity market

    International Nuclear Information System (INIS)

    Porkar, S.; Poure, P.; Abbaspour-Tehrani-fard, A.; Saadate, S.

    2010-01-01

    This paper introduces a new framework included mathematical model and a new software package interfacing two powerful softwares (MATLAB and GAMS) for obtaining the optimal distributed generation (DG) capacity sizing and sitting investments with capability to simulate large distribution system planning. The proposed optimization model allows minimizing total system planning costs for DG investment, DG operation and maintenance, purchase of power by the distribution companies (DISCOs) from transmission companies (TRANSCOs) and system power losses. The proposed model provides not only the DG size and site but also the new market price as well. Three different cases depending on system conditions and three different scenarios depending on different planning alternatives and electrical market structures, have been considered. They have allowed validating the economical and electrical benefits of introducing DG by solving the distribution system planning problem and by improving power quality of distribution system. DG installation increases the feeders' lifetime by reducing their loading and adds the benefit of using the existing distribution system for further load growth without the need for feeders upgrading. More, by investing in DG, the DISCO can minimize its total planning cost and reduce its customers' bills. (author)

  13. A novel optimal distribution system planning framework implementing distributed generation in a deregulated electricity market

    Energy Technology Data Exchange (ETDEWEB)

    Porkar, S. [Department of Electrical Engineering, Sharif University of Technology, Tehran (Iran); Groupe de Recherches en Electrotechnique et Electronique de Nancy, GREEN-UHP, Universite Henri Poincare de Nancy I, BP 239, 54506 Vandoeuvre les Nancy Cedex (France); Poure, P. [Laboratoire d' Instrumentation Electronique de Nancy, LIEN, EA 3440, Universite Henri Poincare de Nancy I, BP 239, 54506 Vandoeuvre les Nancy Cedex (France); Abbaspour-Tehrani-fard, A. [Department of Electrical Engineering, Sharif University of Technology, Tehran (Iran); Saadate, S. [Groupe de Recherches en Electrotechnique et Electronique de Nancy, GREEN-UHP, Universite Henri Poincare de Nancy I, BP 239, 54506 Vandoeuvre les Nancy Cedex (France)

    2010-07-15

    This paper introduces a new framework included mathematical model and a new software package interfacing two powerful softwares (MATLAB and GAMS) for obtaining the optimal distributed generation (DG) capacity sizing and sitting investments with capability to simulate large distribution system planning. The proposed optimization model allows minimizing total system planning costs for DG investment, DG operation and maintenance, purchase of power by the distribution companies (DISCOs) from transmission companies (TRANSCOs) and system power losses. The proposed model provides not only the DG size and site but also the new market price as well. Three different cases depending on system conditions and three different scenarios depending on different planning alternatives and electrical market structures, have been considered. They have allowed validating the economical and electrical benefits of introducing DG by solving the distribution system planning problem and by improving power quality of distribution system. DG installation increases the feeders' lifetime by reducing their loading and adds the benefit of using the existing distribution system for further load growth without the need for feeders upgrading. More, by investing in DG, the DISCO can minimize its total planning cost and reduce its customers' bills. (author)

  14. Assessing safety risk in electricity distribution processes using ET & BA improved technique and its ranking by VIKOR and TOPSIS models in fuzzy environment

    Directory of Open Access Journals (Sweden)

    S. Rahmani

    2016-04-01

      Conclusion: The height and electricity are of the main causes of accidents in electricity transmission and distribution industry which caused the overhead power networks to be ranked as high risk. Application of decision-making models in fuzzy environment minimizes the judgment of assessors in the risk assessment process.

  15. The nuclear electricity generating industry in England and Wales post-privatisation

    International Nuclear Information System (INIS)

    Johnson, C.B.

    1992-01-01

    This paper presents an overview of the new legal framework within which the nuclear generating industry has operated in England and Wales since 31 March 1990. It describes the formation of Nuclear Electric plc and the licensing arrangements, including the various obligations which have been placed upon Nuclear Electric by virtue of its Generation Licence. The impact of competition law is outlined, together with the commercial arrangements including electricity pooling and some of the other more important agreements which Nuclear Electric has entered into. Finally, the Paper discusses some of the constraints under which Nuclear Electric operates, and summarises Government policy towards nuclear power and its future prospects in the United Kingdom. (author)

  16. MERCURY USAGE AND ALTERNATIVES IN THE ELECTRICAL AND ELECTRONICS INDUSTRIES

    Science.gov (United States)

    Many industries have already found alternatives for mercury or have greatly decreased mercury use. However, the unique electromechanical and photoelectric properties of mercury and mercury compounds have made replacement of mercury difficult in some applications. This study was i...

  17. Market structure in the US electricity industry: a long-term perspective

    International Nuclear Information System (INIS)

    Kamerschen, D.R.

    2005-01-01

    We estimate changes in market structure in the US electric power industry during the last three decades using two independent approaches. First, we estimate an industry-wide conjectural-variations parameter. We find that industry concentration was generally rising during the 1970s but has been gradually and consistently falling since the early 1980s. To check the robustness of these results, we then use a translog production function to estimate the Lerner Index. The results confirm that the industry was becoming less concentrated during the 1980s, though the Lerner Index tended to fluctuate during the late 1980s and early 1990s. Our results suggest that the current state of the electricity industry may have more to do with long-term changes in market structure than recent attempts to establish competitive wholesale electricity markets. (author)

  18. Severity of electrical accidents in the construction industry in Spain.

    Science.gov (United States)

    Suárez-Cebador, Manuel; Rubio-Romero, Juan Carlos; López-Arquillos, Antonio

    2014-02-01

    This paper analyzes the severity of workplace accidents involving electricity in the Spanish construction sector comprising 2,776 accidents from 2003 to 2008. The investigation considered the impact of 13 variables, classified into 5 categories: Personal, Business, Temporal, Material, and Spatial. The findings showed that electrical accidents are almost five times more likely to have serious consequences than the average accident in the sector and it also showed how the variables of age, occupation, company size, length of service, preventive measures, time of day, days of absence, physical activity, material agent, type of injury, body part injured, accident location, and type of location are related to the severity of the electrical accidents under consideration. The present situation makes it clear that greater effort needs to be made in training, monitoring, and signage to guarantee a safe working environment in relation to electrical hazards. This research enables safety technicians, companies, and government officials to identify priorities and to design training strategies to minimize the serious consequences of electrical accidents for construction workers. Copyright © 2013 Elsevier Ltd and National Safety Council. All rights reserved.

  19. Electric Power quality Analysis in research reactor: Impacts on nuclear safety assessment and electrical distribution reliability

    International Nuclear Information System (INIS)

    Touati, Said; Chennai, Salim; Souli, Aissa

    2015-01-01

    The increased requirements on supervision, control, and performance in modern power systems make power quality monitoring a common practise for utilities. Large databases are created and automatic processing of the data is required for fast and effective use of the available information. Aim of the work presented in this paper is the development of tools for analysis of monitoring power quality data and in particular measurements of voltage and currents in various level of electrical power distribution. The study is extended to evaluate the reliability of the electrical system in nuclear plant. Power Quality is a measure of how well a system supports reliable operation of its loads. A power disturbance or event can involve voltage, current, or frequency. Power disturbances can originate in consumer power systems, consumer loads, or the utility. The effect of power quality problems is the loss power supply leading to severe damage to equipments. So, we try to track and improve system reliability. The assessment can be focused on the study of impact of short circuits on the system, harmonics distortion, power factor improvement and effects of transient disturbances on the Electrical System during motor starting and power system fault conditions. We focus also on the review of the Electrical System design against the Nuclear Directorate Safety Assessment principles, including those extended during the last Fukushima nuclear accident. The simplified configuration of the required system can be extended from this simple scheme. To achieve these studies, we have used a demo ETAP power station software for several simulations. (authors)

  20. Electric Power quality Analysis in research reactor: Impacts on nuclear safety assessment and electrical distribution reliability

    Energy Technology Data Exchange (ETDEWEB)

    Touati, Said; Chennai, Salim; Souli, Aissa [Nuclear Research Centre of Birine, Ain Oussera, Djelfa Province (Algeria)

    2015-07-01

    The increased requirements on supervision, control, and performance in modern power systems make power quality monitoring a common practise for utilities. Large databases are created and automatic processing of the data is required for fast and effective use of the available information. Aim of the work presented in this paper is the development of tools for analysis of monitoring power quality data and in particular measurements of voltage and currents in various level of electrical power distribution. The study is extended to evaluate the reliability of the electrical system in nuclear plant. Power Quality is a measure of how well a system supports reliable operation of its loads. A power disturbance or event can involve voltage, current, or frequency. Power disturbances can originate in consumer power systems, consumer loads, or the utility. The effect of power quality problems is the loss power supply leading to severe damage to equipments. So, we try to track and improve system reliability. The assessment can be focused on the study of impact of short circuits on the system, harmonics distortion, power factor improvement and effects of transient disturbances on the Electrical System during motor starting and power system fault conditions. We focus also on the review of the Electrical System design against the Nuclear Directorate Safety Assessment principles, including those extended during the last Fukushima nuclear accident. The simplified configuration of the required system can be extended from this simple scheme. To achieve these studies, we have used a demo ETAP power station software for several simulations. (authors)

  1. Hydro and geothermal electricity as an alternative for industrial petroleum consumption in Costa Rica

    Energy Technology Data Exchange (ETDEWEB)

    Mendis, M.; Park, W.; Sabadell, A.; Talib, A.

    1982-04-01

    This report assesses the potential for substitution of electricity for petroleum in the industrial/agro-industrial sector of Costa Rica. The study includes a preliminary estimate of the process energy needs in this sector, a survey of the principal petroleum consuming industries in Costa Rica, an assessment of the electrical technologies appropriate for substitution, and an analysis of the cost trade offs of alternative fuels and technologies. The report summarizes the total substitution potential both by technical feasibility and by cost effectiveness under varying fuel price scenarios and identifies major institutional constraints to the introduction of electric based technologies. Recommendations to the Government of Costa Rica are presented. The key to the success of a Costa Rican program for substitution of electricity for petroleum in industry rests in energy pricing policy. The report shows that if Costa Rica Bunker C prices are increased to compare equitably with Caribbean Bunker C prices, and increase at 3 percent per annum relative to a special industrial electricity rate structure, the entire substitution program, including both industrial and national electric investment, would be cost effective. The definition of these pricing structures and their potential impacts need to be assessed in depth.

  2. Activities for the privatisation of the electricity supply industry in Great Britain. Electricity changing from public ownership to administrative, regulatory control

    Energy Technology Data Exchange (ETDEWEB)

    Hermann, H P

    1988-11-01

    According to Great Britain's energy policy, the electricity industry is going to be denationalised, so that the electricity sector will be governed by the principles of free competition, releaved from governmental intervention and political constraints, and supervised by the Director General of Electricity Supply. This restructurisation is intended to improve Britain's electricity industry in terms of dynamics, creativity, supply quality, and efficiency. A major goal is to strengthen the competitiveness of the British industry, and to enhance electricity supply to private consumers by way of more favourable electricity rates.

  3. Ways to control quality of electric equipment in the coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Shipilov, A.D.; Nabokov, E.P.

    1982-01-01

    A structure is proposed for organization in the coal industry of a permanent service for controlling quality of electrical engineering equipment. A form was developed for introduction of recommendations to improve quality. Methods are suggested for evaluating the quality level as applied to specific tasks of controlling quality of the electrical equipment used in mining.

  4. Service to the Electric Utility Industry by the Ford Nuclear Reactor, University of Michigan

    International Nuclear Information System (INIS)

    Burn, R.R.; Simpson, P.A.; Cook, G.M.

    1993-01-01

    Since 1977, the staff of the University of Michigan's Ford Nuclear Reactor has been providing irradiation, testing, analytical, and training services to electric utilities and to suppliers of the nuclear electric utility industry. This paper discusses the reactor's irradiation facilities; reactor programs and utilization; materials testing programs; neutron activation analysis activities; and training programs conducted

  5. The impact of electricity price changes on industrial prices and the general price level in Korea

    International Nuclear Information System (INIS)

    Lim, Seul-Ye; Yoo, Seung-Hoon

    2013-01-01

    Electricity has played an important role in the economic development of Korea and, thus, has become a critical factor in sustaining the well-being of the Korean people. This study attempts to investigate the impact of electricity price changes on industrial prices and the general price level using input–output (I–O) analysis. To this end, we apply the I–O price model to the 2011 I–O table recently produced by the Bank of Korea, paying particular attention to the electricity sector by considering it as exogenous and then investigating its impacts. The impacts of the electricity price changes on each industrial sector's prices and the general price level are quantitatively derived. For example, the overall impact of a 10% increase in electricity price on the Korean national economy is estimated to be 0.4367%. We also report the results from the model with the electricity sector endogenous and the model with endogenous electricity and labor sectors. This information can be usefully utilized in decision-making regarding price management for electricity. - Highlights: • We investigate the impact of electricity price changes on the Korean economy. • We use the input–output (I–O) analysis specifying the electricity sector as exogenous. • We apply the I–O price model to 2010 I–O table produced by the Bank of Korea. • The impact of a 10% increase in electricity price on the Korean economy is 0.2176%

  6. Assessing safety risk in electricity distribution processes using ET & BA improved technique and its ranking by VIKOR and TOPSIS models in fuzzy environment

    OpenAIRE

    S. Rahmani; M. Omidvari

    2016-01-01

    Introduction: Electrical industries are among high risk industries. The present study aimed to assess safety risk in electricity distribution processes using  ET&BA technique and also to compare with both VIKOR & TOPSIS methods in fuzzy environments.   Material and Methods: The present research is a descriptive study and ET&BA worksheet is the main data collection tool. Both Fuzzy TOPSIS and Fuzzy VIKOR methods were used for the worksheet analysis.   Result: Findi...

  7. Long-term water demand for electricity, industry and households

    NARCIS (Netherlands)

    Bijl, David L.; Bogaart, Patrick W.; Kram, Tom; de Vries, Bert J M; van Vuuren, Detlef P.

    2016-01-01

    Better water demand projections are needed in order to better assess water scarcity. The focus in this paper is on non-agricultural water demand, as this is the fastest-growing and least well-modelled demand component. We describe an end use-oriented model for future water demand in the electricity,

  8. Letting the (energy) Gini out of the bottle: Lorenz curves of cumulative electricity consumption and Gini coefficients as metrics of energy distribution and equity

    International Nuclear Information System (INIS)

    Jacobson, Arne; Milman, Anita D.; Kammen, Daniel M.

    2005-01-01

    Energy services are fundamental determinants of the quality of life as well as the economic vitality of both industrialized and developing nations. Few analytic tools exist, however, to explore changes in individual, household, and national levels of energy consumption and utilization. In order to contribute to such analyses, we extend the application of Lorenz curves to energy consumption. We examined the distribution of residential electricity consumption in five countries: Norway, USA, El Salvador, Thailand, and Kenya. These countries exhibit a dramatic range of energy profiles, with electricity consumption far more evenly distributed across the population in some industrialized nations than others, and with further significant differences in the Lorenz distribution between industrialized and industrializing economies. The metric also provides critical insights into the temporal evolution of energy management in different states and nations. We illustrate this with a preliminary longitudinal study of commercial and industrial electricity use in California during the economically volatile 1990s. Finally, we explore the limits of Lorenz analyses for understanding energy equity through a discussion of the roles that variations in energy conversion efficiency and climate play in shaping distributions of energy consumption. The Lorenz method, which is widely employed by economists to analyze income distribution, is largely unused in energy analysis, but provides a powerful new tool for estimating the distributional dimensions of energy consumption. Its widespread use can make significant contributions to scientific and policy debates about energy equity in the context of climate change mitigation, electric power industry deregulation and restructuring, and the development of national infrastructure

  9. Life cycle inventory of electricity cogeneration from bagasse in the South African sugar industry

    CSIR Research Space (South Africa)

    Mashoko, L

    2013-01-01

    Full Text Available The South African sugar industry has a potential for cogeneration of steam and electricity using bagasse. The sugar industry has the potential to generate about 960 MW per year from bagasse based on the average of 20 million tons of sugar cane...

  10. The new economics of the electric power industry and some implication for the natural gas industry

    International Nuclear Information System (INIS)

    Hall, G.R.

    1995-01-01

    The current restructuring of the natural gas industry and its regulation have important implications for the natural gas industry. Some of these implications are positive, some negative. As in all situations of change and uncertainty, look before you leap, is good advice to those in the natural gas industry seeking to take advantage of the opportunities created by the startling changes that are occurring

  11. Operation of industrial electrical substations. Part II: practical applications

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Jimenez, Juan J; Zerquera Izquierdo, Mariano D; Beltran Leon, Jose S; Garcia Martinez, Juan M; Alvarez Urena, Maria V; Meza Diaz, Guillermo [Universidad de Guadalajara (Mexico)]. E-mails: cheosj@yahoo.com; mdzi@hotmail.com; beltran5601@yahoo.com.mx; jmargarmtz@yahoo.com; victory_alvarez@telmexmail.com; depmec@cucei.udg.mx

    2013-03-15

    The practical application of the methodology explained in Part 1 in a Cuban industry is the principal objective of this paper. The calculus of the economical operation of the principal transformers of the industrial plant is shown of the one very easy form, as well as the determination of the equations of the losses when the transformers operate under a given load diagram. It is calculated the state load which will be passed to the operation in parallel. [Spanish] El objetivo principal de este trabajo es la aplicacion practica de la metodologia, en una industria cubana, que se explico en la Parte 1. El calculo de la operacion economica de los principales transformadores de la planta industrial se muestra de una forma muy facil, asi como la determinacion de las ecuaciones de las perdidas cuando los transformadores operan bajo un diagrama de carga dado. Se calcula la carga de estado que se pasa a la operacion en paralelo.

  12. Local electricity market design for the coordination of distributed energy resources at district level

    NARCIS (Netherlands)

    Ampatzis, M.; Nguyen, P.H.; Kling, W.L.

    2014-01-01

    The increasing penetration of distributed energy resources at the distribution grid level creates concerns about their successful integration in the existing electric grid, designed for centralized generation by large power plants. Failure to the proper integration of distributed energy resources

  13. Measurement of the residence time distribution in industrial flotation equipment

    International Nuclear Information System (INIS)

    Yianatos, Juan; Diaz, F; Rodriguez, Jorge

    2003-01-01

    This work presents a determination of the effective liquid and solid residence time in mechanical cell banks of primary and sweep flotation, and in cleaning flotation columns, at Codelco-Chile's Salvador Division. The determination was carried out using the residence time distribution (RTD) measurement with radioactive tracers. Br-82 was used as the trace element for the liquid. Different kinds of minerals were used to trace the solid: a) activated global tailing (non floatable), b) tailing activated by size classifications (non floatable) and c) activated floatable mineral. The residence time measurement defined effective volumes of 50-80% of the total volume in flotation cell banks, and effective volumes of 77% of the total volume of large-size flotation solids. The effective residence time of the solid (23%+212 microns) in industrial flotation cell banks was 5% below that for the liquid. The residence time of the mineral decreased with increased particle size. Thick mineral (>150 microns) showed a residence time 8% below that for thin mineral (<45 microns). The RTD of industrial mechanical cell banks is adequately represented with a number of perfect mixers in series equivalent to the number of real bank cells. The RTD of the industrial columns equals less than two perfect mixers in series and adjusts better when considering a perfect mixers in series model, but in a different size. Common operating problems could also be observed and analyzed through the RTD measurement, such as embankment of the equipment and the deficient regulation of the outflow, used to control the pulp level (Cw)

  14. Electricity purchase agreements and distributed energy policies for anaerobic digesters

    International Nuclear Information System (INIS)

    Binkley, David; Harsh, Stephen; Wolf, Christopher A.; Safferman, Steven; Kirk, Dana

    2013-01-01

    Anaerobic digestion is increasingly recognized for its ability to produce renewable energy and reduce greenhouse gas emissions from livestock operations. In 2010, there were 2645 U.S. dairy farms with herd sizes large enough to support anaerobic digesters, yet only 156 systems were in operation (U.S. Environmental Protection Agency (U.S. EPA), 2010a. Market Opportunities for Biogas Recovery Systems at U.S. Livestock Facilities. AgSTAR Program; U.S. Environmental Protection Agency (U.S. EPA), 2011. Operational Anaerobic Digesters, Sorted by State (Dairy). AgSTAR Program.). This study analyzes the net present value of digester systems under alternative electricity purchase agreements and how returns are affected by standby charges, net metering policies and the use of feed-in-tariffs. In order for digester potential to be fully realized on a state or national level, changes to distributed energy policy are required. Results indicated that standby charges can reduce revenues from offsetting electricity by an average of nearly 20%. Net metering rules limit participation among larger farms and negatively affect profitability by restricting engine–generator size. Lastly, the effectiveness of a fixed price feed-in-tariff policy for digesters is significantly affected by project size differentiation. Digester energy policies are similar nationwide, making this study useful for government regulatory agencies and digester owners throughout the U.S. - Highlights: ► Anaerobic digester net present value was examined over a range of herd sizes. ► Standby charges reduce electricity sales revenues by an average of nearly 20%. ► Net metering rules reduce profitability by restricting engine–generator size. ► Feed-in-tariffs for digesters are significantly affected by project size.

  15. Cost functions and the electric utility industry. A contribution to the debate on deregulation

    International Nuclear Information System (INIS)

    Ramos-Real, F.J.

    2005-01-01

    This study analyses the main articles that estimate cost functions in the electricity utility industry with a view to studying of the initial arguments for proposing competition and vertical disintegration. The works reviewed here, in general terms, confirm the initial arguments in favour of the deregulation process, mainly, the exhaustion of scale economies for moderate size firms in generation and the condition of natural monopoly for transmission and distribution. However, the savings obtained from undertaking different activities together should be kept in mind when restructuring the sector. On the other hand, the improvements in productivity deriving from the reforms have not translated into reductions in the price of electricity in many countries. These last two results suggest the need for appropriate market regulation for the deregulation process to translate into an improvement in how the sector works and into benefits for consumers. There is still insufficient empirical literature on these issues due to the fact that the process is still ongoing in many countries and more time will have to transpire before sufficient data is available

  16. Global distribution of grid connected electrical energy storage systems

    Directory of Open Access Journals (Sweden)

    Katja Buss

    2016-06-01

    Full Text Available This article gives an overview of grid connected electrical energy storage systems worldwide, based on public available data. Technologies considered in this study are pumped hydroelectric energy storage (PHES, compressed air energy storage (CAES, sodium-sulfur batteries (NaS, lead-acid batteries, redox-flow batteries, nickel-cadmium batteries (NiCd and lithium-ion batteries. As the research indicates, the worldwide installed capacity of grid connected electrical energy storage systems is approximately 154 GW. This corresponds to a share of 5.5 % of the worldwide installed generation capacity. Furthermore, the article gives an overview of the historical development of installed and used storage systems worldwide. Subsequently, the focus is on each considered technology concerning the current storage size, number of plants and location. In summary it can be stated, PHES is the most commonly used technology worldwide, whereas electrochemical technologies are increasingly gaining in importance. Regarding the distribution of grid connected storage systems reveals the share of installed storage capacity is in Europe and Eastern Asia twice as high as in North America.

  17. Greening of Nordic electricity industry: policy convergence and diversity

    International Nuclear Information System (INIS)

    Midttun, Atle; Gundersen, Mari Hegg; Koefoed, Anne Louise

    2004-01-01

    With a comparative focus on policy similarity and diversity, this article gives an overview of the main elements of electricity-related environmental policy in the Nordic countries, following the launching of a common electricity market in the 1990s. The article points out that the electricity related environmental policy positions of the Nordic countries showed a noticeable lack of coordination in the 1990s. Nordic divergence is observed both in terms of general policy orientations and at the instrument and incentive levels, in spite of the pioneering development of a common integrated electricity market and ambitious environmental policy goals. The article then highlights how the recent Swedish 'green' certificate market model has created a new momentum for market-based 'greening' with a potential for stronger convergence in Nordic renewable energy policy. In spite of signs of convergence, the article shows how the development of Nordic electricity-related environmental policy still contains considerable ambiguity: Unequal resource endowments, subject to simple resource-based interest formation, should indicate that there is little room for convergence in Nordic renewable energy policy. Shifting the environmental policy focus from existing technologies and resources to potential innovations, however provides a more open arena where the Nordic countries may see themselves served by the dynamic scope of a broader Nordic market based on a common policy approach, such as a green certificate market. In explaining why the Nordic arena may be an interesting locus for common renewable energy policy, the article points out that small countries may need an 'intermediary' arena to aggregate size and scope in order to generate a European momentum in regulatory competition with larger European states. Similarly, Nordic companies may consider the opportunity to gain first mover advantages by partnering with government as local experimentation may be seen as useful pilot

  18. From franchise to state commission: Regulation of the electric utility industry, 1907 to 1932

    Science.gov (United States)

    Reutter, Keith Alan

    1997-09-01

    Empirical research into the effects of regulation on industry has been around since the early 1960s. Over the last thirty plus years a number of interesting results have been brought to the fore. For instance, it has been found that regulation of the trucking industry limits entry and increases prices. A similar result has been pointed to in other industries such as commercial airlines and banking. The effect of the state commission form of regulation on the electric utility industry has been less conclusive. State commissions became dominant during the period 1910-1930, replacing local franchising as a method of regulating the electric utility industry. Two competing theories suggest why this transformation took place, the "capture" and "public interest" theories of regulation. The capture theory of regulation suggests that the electric utility industry demanded state regulation as a way to earn above normal profits and reduce competition. The public interest theory suggests the purpose of regulation by state commissions was to benefit the general public by forcing the industry to be competitive. Few studies have tried to determine which theory more aptly describes the actual events that took place. The empirical model developed in Chapter V, is an extension of the current literature. A set of simultaneous equations describing the natural gas and electricity markets is estimated using cross-sectional time-series data from 1907 to 1932. The effect of regulation on the electric utility industry is modeled with a dummy variable taking on a value of one to designate that a state commission had been established. The results suggest the capture theory of regulation best describes the period under study. The empirical estimates indicate that state commissions (1) reduced the rate at which the real price of electricity was falling, (2) had a negative impact on firms entering the industry, (3) had a positive influence on the cost of producing a kwh of electricity, and (4

  19. Generating capital: improving investor confidence in Ontario's electricity industry to induce new generation investment

    International Nuclear Information System (INIS)

    Van Beers, R.

    2004-01-01

    This paper is a critical discussion on improving investor confidence in Ontario's electricity industry to induce new generation investment. The reason that investor confidence is critical in the electric power industry is due to the fact that the industry is capital intensive, the asset life is long, it is impossible to model political/regulatory risk and political action is virtually inevitable. The paper concludes that ultimately private sector investors will bear little risk, the tax payer will be on the hook for almost all risk

  20. Electric power transmission and distribution in Germany - an NTPA success

    International Nuclear Information System (INIS)

    Staschus, K.

    2002-01-01

    The German Energy Law of April 1998 opened 100 percent of the German electricity market to competition without any transition phase. Over four years later, the degree of market opening is still ahead of that in many other European countries. Transition phases elsewhere have been dominated by the need to develop detailed rules not only for the functioning of the power markets - e.g. in power exchanges - but also for the transmission and distribution system operators and for the data exchange between market participants. Especially the data exchange needs for the handling of household customers switching suppliers has been a challenge in all the countries that have opened the household customer market. But also the network access fees on both transmission and distribution level are still being debated in many countries. The German governments have so far chosen to let the network operators develop the access rules, pricing rules and data exchange standards in intense - and intensely observed - negotiations with the network users. Important outcomes of such negotiations include the well-known A ssociations' Agreements , GridCode, DistributionCode, MeteringCode as well as the government's Best Practice Recommendations on data exchange standards for the switching between suppliers. One important advantage of this negotiation-based rather than regulatory approach is its speed and flexibility. For example, the Associations' Agreement on network access fees is now valid in its third version, and each successive version included important learning from the experience of both network operators and network users with the previous agreement. This paper will summarise the legal framework of the liberalised power market in Germany and focus on the current state of pricing rules in the Associations' Agreement, of well advanced comparisons run by VDN, of the network access fees of hundreds of distribution system operators including specific data on structural differences of their

  1. Human networks in the European electric power industry

    International Nuclear Information System (INIS)

    Barjot, Dominique; Kurgan-van Hentenryk, Ginette

    2004-01-01

    Behind electrical systems, we should not forget the human networks. The European case is interesting for that matter. There were major players involved, from the pioneers up to the conceivers of national and international systems. More particularly, the engineers should be considered for their technical as well as organizational performance. Attitudes must also be stressed: in Europe, electricity has constantly been developed with both nationalist and internationalist considerations, as shown by the passage from Unternehmergeschaeft to Bankgeschaeft after 1918. Neither should we forget the role played by institutions in the formation of networks: schools, holdings, cartels, and also those frontier zones formed by small countries like Belgium and Switzerland. The human networks, finally, left long term results such as: interconnection, inter-firm cooperation, technocracy, and the growing intervention of the State

  2. Expert system reasoning techniques applicable to the electric power industry

    International Nuclear Information System (INIS)

    Touchton, R.A.

    1987-01-01

    This paper describes the applicability of three problem solving paradigms adopted from the artificial intelligence discipline of computer sciences, which have been used in developing nuclear plant expert systems. Each technique is briefly defined and an example is presented that shows how that technique was used in developing an expert system application prototype. The three paradigms and their associated example systems are: (1) rule-based reasoning: reactor emergency action level monitor (REALM) for the Electric Power Research Institute, (2) object-oriented programming: accident diagnosis and prognosis aid for the US Department of Energy, and (3) model-based reasoning: knowledge-based monitoring and control system for the Electric Power Research Institute

  3. Forecasting electricity infeed for distribution system networks : an analysis of the Dutch case

    NARCIS (Netherlands)

    Tanrisever, F.; Derinkuyu, K.; Heeren, M.

    2013-01-01

    Estimating and managing electricity distribution losses are the core business competencies of distribution system operators (DSOs). Since electricity demand is a major driver of network losses, it is essential for DSOs to have an accurate estimate of the electricity infeed in their network. In this

  4. Getting to Gender Equality in Energy Infrastructure : Lessons from Electricity Generation, Transmission, and Distribution Projects

    OpenAIRE

    Orlando, Maria Beatriz; Janik, Vanessa Lopes; Vaidya, Pranav; Angelou, Nicolina; Zumbyte, Ieva; Adams, Norma

    2018-01-01

    Getting to Gender Equality in Electricity Infrastructure: Lessons from Electricity Generation, Transmission, and Distribution Projects examines the social and gender footprint of large-scale electricity generation, transmission, and distribution projects to establish a foundation on which further research and replication of good practices can be built. The main impact pathways analyzed are...

  5. Impact of peak electricity demand in distribution grids: a stress test

    NARCIS (Netherlands)

    Hoogsteen, Gerwin; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria; Schuring, Friso; Kootstra, Ben

    2015-01-01

    The number of (hybrid) electric vehicles is growing, leading to a higher demand for electricity in distribution grids. To investigate the effects of the expected peak demand on distribution grids, a stress test with 15 electric vehicles in a single street is conducted and described in this paper.

  6. Analysis and forecast of electrical distribution system materials. Final report. Volume III. Appendix

    Energy Technology Data Exchange (ETDEWEB)

    Love, C G

    1976-08-23

    These appendixes are referenced in Volume II of this report. They contain the detailed electrical distribution equipment requirements and input material requirements forecasts. Forecasts are given for three electric energy usage scenarios. Also included are data on worldwide reserves and demand for 30 raw materials required for the manufacture of electrical distribution equipment.

  7. Evaluation of DC electric field distribution of PPLP specimen based on the measurement of electrical conductivity in LN2

    Science.gov (United States)

    Hwang, Jae-Sang; Seong, Jae-Kyu; Shin, Woo-Ju; Lee, Jong-Geon; Cho, Jeon-Wook; Ryoo, Hee-Suk; Lee, Bang-Wook

    2013-11-01

    High temperature superconducting (HTS) cable has been paid much attention due to its high efficiency and high current transportation capability, and it is also regarded as eco-friendly power cable for the next generation. Especially for DC HTS cable, it has more sustainable and stable properties compared to AC HTS cable due to the absence of AC loss in DC HTS cable. Recently, DC HTS cable has been investigated competitively all over the world, and one of the key components of DC HTS cable to be developed is a cable joint box considering HVDC environment. In order to achieve the optimum insulation design of the joint box, analysis of DC electric field distribution of the joint box is a fundamental process to develop DC HTS cable. Generally, AC electric field distribution depends on relative permittivity of dielectric materials but in case of DC, electrical conductivity of dielectric material is a dominant factor which determines electric field distribution. In this study, in order to evaluate DC electric field characteristics of the joint box for DC HTS cable, polypropylene laminated paper (PPLP) specimen has been prepared and its DC electric field distribution was analyzed based on the measurement of electrical conductivity of PPLP in liquid nitrogen (LN2). Electrical conductivity of PPLP in LN2 has not been reported yet but it should be measured for DC electric field analysis. The experimental works for measuring electrical conductivity of PPLP in LN2 were presented in this paper. Based on the experimental works, DC electric field distribution of PPLP specimen was fully analyzed considering the steady state and the transient state of DC. Consequently, it was possible to determine the electric field distribution characteristics considering different DC applying stages including DC switching on, DC switching off and polarity reversal conditions.

  8. [Determination of electric field distribution in dielectric barrier surface glow discharge by spectroscopic method].

    Science.gov (United States)

    Li, Xue-chen; Jia, Peng-ying; Liu, Zhi-hui; Li, Li-chun; Dong, Li-fang

    2008-12-01

    In the present paper, stable glow discharges were obtained in air at low pressure with a dielectric barrier surface discharge device. Light emission from the discharge was detected by photomultiplier tubes and the research results show that the light signal exhibited one discharge pulse per half cycle of the applied voltage. The light pulses were asymmetric between the positive half cycle and the negative one of the applied voltage. The images of the glow surface discharge were processed by Photoshop software and the results indicate that the emission intensity remained almost constant for different places with the same distance from the powered electrode, while the emission intensity decreased with the distance from the powered electrode increasing. In dielectric barrier discharge, net electric field is determined by the applied voltage and the wall charges accumulated on the dielectric layer during the discharge, and consequently, it is important to obtain information about the net electric field distribution. For this purpose, optical emission spectroscopy method was used. The distribution of the net electric field can be deduced from the intensity ratio of spectral line 391.4 nm emitted from the first negative system of N2+ (B 2sigma u+ -->X 2sigma g+) to 337.1 nm emitted from the second positive system of N2 (C 3IIu-B 3IIg). The research results show that the electric field near the powered electric field is higher than at the edge of the discharge. These experimental results are very important for numerical study and industrial application of the surface discharge.

  9. A literature survey on asset management in electrical power [transmission and distribution] system

    NARCIS (Netherlands)

    Khuntia, S.R.; Rueda Torres, José L.; Bouwman, S.; van der Meijden, M.A.M.M.

    2016-01-01

    Asset management is one of the key components in a transforming electric power industry. Electric power industry is undergoing significant changes because of technical, socio-economical and environmental developments. Also, because of restructuring and deregulation, the focus has been on

  10. Deregulation of the electric utility industry - implications for nuclear power

    International Nuclear Information System (INIS)

    Fern, A.Rose

    2000-01-01

    The deregulation movement sweeping the international electric utility community represents a dramatic shift om the traditional business model of utilities. This paper will focus on deregulation in thc United States and the new challenges for nuclear power plant operators. An overview of the new operating models being implemented in the US will lead into a discussion on new economic and operating concerns for nuclear power plant operators. (author)

  11. Deregulation of the electric utility industry - implications for nuclear power

    International Nuclear Information System (INIS)

    Fern, A.R.

    2001-01-01

    The deregulation movement sweeping the international electric utility community represents a dramatic shift from the traditional utility business model. This paper will focus on deregulation in the United States and the new challenges for nuclear power plant operators. An overview of the new operating models being implemented in the US will lead into a discussion on new economic and operating concerns for nuclear power plant operators. (author)

  12. Macroeconomic impact of the Solar Thermal Electricity Industry in Spain

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-10-15

    In the last three years, Solar Thermal Electricity (STE) in Spain has grown significantly. Its weight within the renewables mix is becoming relevant, and even more so, its impact on economics, society, the environment, and reducing energy dependence. This report was carried out by Deloitte for Protermosolar to quantitatively and qualitatively evaluate the main macroeconomic variables derived from the development of this technology in Spain from 2008 to 2010, and forecast its possible future impact.

  13. Business opportunities and dynamic competition through distributed generation in primary electricity distribution networks

    International Nuclear Information System (INIS)

    Raineri, R.; Rios, S.; Vasquez, R.

    2005-01-01

    In this paper, for a real electricity distribution network, an assessment of business opportunities to invest in distributed generation (DG) is performed through a simulation based on a full representation of three medium voltage (12 kV) feeders. The three feeders representation includes 1062 sections of conductors with 13 different sizes. The economic assessment focuses on both, the incentives of the incumbent distribution company and those of a new entrant. The technical and economic impact on losses, reliability and voltage regulation in the network area are verified. The DG solution analyzed determines a business opportunity for new investors where end users are also benefited. This work calls in the debate on the need to reformulate the current regulation model on electricity distribution, by defining clear rules to incorporate DG to the existing network, and to enable any agent to develop the proposed business. DG success depends on the location of adequate sites to strategically establish few DG units being a substitute to network expansion

  14. Modeling and Simulation of Power Distribution System in More Electric Aircraft

    Directory of Open Access Journals (Sweden)

    Zhangang Yang

    2015-01-01

    Full Text Available The More Electric Aircraft concept is a fast-developing trend in modern aircraft industry. With this new concept, the performance of the aircraft can be further optimized and meanwhile the operating and maintenance cost will be decreased effectively. In order to optimize the power system integrity and have the ability to investigate the performance of the overall system in any possible situations, one accurate simulation model of the aircraft power system will be very helpful and necessary. This paper mainly introduces a method to build a simulation model for the power distribution system, which is based on detailed component models. The power distribution system model consists of power generation unit, transformer rectifier unit, DC-DC converter unit, and DC-AC inverter unit. In order to optimize the performance of the power distribution system and improve the quality of the distributed power, a feedback control network is designed based on the characteristics of the power distribution system. The simulation result indicates that this new simulation model is well designed and it works accurately. Moreover, steady state performance and transient state performance of the model can fulfill the requirements of aircraft power distribution system in the realistic application.

  15. Local Design & Global Dreams - Emerging Business Models creating the Emergent Electric Vehicle Industry

    DEFF Research Database (Denmark)

    Rask, Morten; Andersen, Poul Houman; Linneberg, Mai Skjøtt

    Electric cars hold the potential to completely alter the interrelationship among actors in the automobile industry architecture. As such they may not only be able to alleviate environmental externalities but also revolutionise the automobile industry as such. This paper is concerned...... with the processes of industry creation for the electric car industry, which is a particular fascinating topic matter as it allows the analysis to provide an understanding of the processes of innovation and of some of its inventors in concert. In continuation of this, the aim of this paper is to describe and analyse...... which emergent business models and corresponding value capturing capabilities can be found in the emerging market for electric cars....

  16. A framework for establishing the technical efficiency of Electricity Distribution Counties (EDCs) using Data Envelopment Analysis

    International Nuclear Information System (INIS)

    Mullarkey, Shane; Caulfield, Brian; McCormack, Sarah; Basu, Biswajit

    2015-01-01

    Highlights: • Six models are employed to establish the technical efficiency of Electricity Distribution Counties. • A diagnostic parameter is incorporated to account for differences across Electricity Distribution Counties. • The amalgamation of Electricity Distribution Counties leads to improved efficiency in the production of energy. - Abstract: European Energy market liberalization has entailed the restructuring of electricity power markets through the unbundling of electricity generation, transmission and distribution, supply activities and introducing competition into electricity generation. Under these new electricity market regimes, it is important to have an evaluation tool that is capable of examining the impacts of these market changes. The adoption of Data Envelopment Analysis as a form of benchmarking for electricity distribution regulation is one method to conduct this analysis. This paper applies a Data Envelopment Analysis framework to the electricity distribution network in Ireland to explore the merits of using this approach, to determine the technical efficiency and the potential scope for efficiency improvements through reorganizing and the amalgamation of the distribution network in Ireland. The results presented show that overall grid efficiency is improved through this restructuring. A diagnostic parameter is defined and pursued to account for aberrations across Electricity Distribution Counties as opposed to the traditionally employed environmental variables. The adoption of this diagnostic parameter leads to a more intuitive understanding of Electricity Distribution Counties

  17. 10 CFR 431.385 - Cessation of distribution of a basic model of an electric motor.

    Science.gov (United States)

    2010-01-01

    ... basic model of an electric motor. (a) In the event that a model of an electric motor is determined non... a model of an electric motor to be in noncompliance, then the manufacturer or private labeler shall... 10 Energy 3 2010-01-01 2010-01-01 false Cessation of distribution of a basic model of an electric...

  18. Japan's electric power industry: responding to the challenges of the 3Es

    International Nuclear Information System (INIS)

    Park, J.

    1999-01-01

    With the rapid push toward deregulation in the power markets of North America, the European Union, and emerging economies, the business environment of the global power market has been dramatically altered in recent years. Profit margins, strategic overseas investments, and shareholder equity have replaced stability and predictability as the new business paradigm in the international electric power industry. Although Japan's electric power industry has not undergone the same degree of market liberalization experienced by its counterparts in North America and the European Union, this does not mean that Japan has escaped the challenges of the 3Es (economic, energy, and environmental changes), which have transformed the international electric power industry in recent years. With companies and consumers in Japan paying the highest price for electricity in the industrialized world, the high price of electricity represents an important business competitiveness issue for firms in energy - and export-intensive industries. This is particularly true now that Japan is desperately trying to end the economic turmoil caused by over regulation and a weak banking system. What remains to be seen is if Japan will be able to deregulate its electric power industry and at the same time, comply with the Kyoto climate change pledge of reducing the country's greenhouse emissions by 6% (compared to 1990 levels) in the next 10 years and continue to meet its energy security objective of expanding the use of nuclear power in the national energy supply. The complex interplay of domestic and international pressures on the national power market need to be explored in order to fully understand the policy challenges facing Japan's electric power industry. (author)

  19. Using the Financial Instruments for Electric Energy Industry Modernization: the Experience of European Countries

    Directory of Open Access Journals (Sweden)

    Hnedina Kateryna V.

    2018-03-01

    Full Text Available A review of the financial instruments used in the European countries to modernize the electric energy industry has been undertaken. A review of the European practices indicates that financial support for the electric energy industry modernization projects is financed by such instruments, mechanisms and incentives as «green» tariff, «green» certificates and «quota obligations», «green» bonds, auctions, concessional lending, grants, investment subsidies. Venture capital investment is a common form of financing for electric energy industry modernization in the European countries. It has been determined that «green» bonds are an effective instrument that allows to accumulate significant amounts of funds and direct them to the renewable energy industry. Nowadays a significant number of renewable energy industry projects in the EU countries have already been implemented at the expense of the funds obtained from the «green» bonds issue. «Green» bonds are a pivotal promising financial instrument for the modernization of electric energy industry in the European countries. Formation of the mechanism for their issue in Ukraine, taking account of the foreign practice of creating a market of «green bonds», will allow to accumulate the financial resources that are necessary for development of the renewable energy industry.

  20. Core business concentration vs. corporate diversification in the US electric utility industry: Synergy and deregulation effects

    International Nuclear Information System (INIS)

    Sueyoshi, Toshiyuki; Goto, Mika; Shang, Jennifer

    2009-01-01

    Many economists such as Wilson (2002) [Wilson, R., 2002. Architecture of power market, Econometrica, 70, 1299-1340] have considered that there are similarities between electricity and gas services in the US electric utility industry. Hence, they expect a synergy effect between them. However, the two businesses do not have technology similarities at the level that the gas service produces a synergy effect with electricity. To examine whether there is a synergy effect of corporate diversification in the industry, we compare electricity-specialized firms with diversified utility firms in terms of their financial performance and corporate value. The comparison indicates that core business concentration is more effective for electric utility firms than corporate diversification under the current US deregulation policy.

  1. Optimizing electricity distribution using two-stage integer recourse models

    NARCIS (Netherlands)

    Klein Haneveld, W.K.; van der Vlerk, Maarten H.

    2000-01-01

    We consider two planning problems faced by an electricity distributor. Electricity can be ob-tained both from power plants and small generators such as hospitals and greenhouses, whereas the future demand for electricity is uncertain. The price of electricity obtained from the power plants depends

  2. Optimizing electricity distribution using two-stage integer recourse models

    NARCIS (Netherlands)

    Klein Haneveld, W.K.; van der Vlerk, M.H.; Uryasev, SP; Pardalos, PM

    2001-01-01

    We consider two planning problems faced by an electricity distributor. Electricity can be obtained both from power plants and small generators such as hospitals and greenhouses, whereas the future demand for electricity is uncertain. The price of electricity obtained from the power plants depends on

  3. Electricity conflicts. Self-conception and strategic action of the electricity industry between politics, industry, the environment and the public (1970-1989)

    International Nuclear Information System (INIS)

    Erhardt, Hendrik

    2017-01-01

    The energy industry has undergone a fundamental transformation process over the past 50 years. The author examines in this study the beginnings and challenges of this process since the 1970s on the basis of previously unevaluated corporate and association sources. For the areas of energy demand, industry and the environment and the public, the author analyzes the behavior of the electricity industry, which since the 1970s has been moving between persistence and change pressure. What leeway did the companies have in these three areas? How did the energy suppliers' actions shape the German energy system? And how did their actions change their image in public? These questions the changes in the energy industry have so far neither been scientifically adequately investigated nor adequately reflected by the actors themselves. The results of the work thus make an important contribution to the analysis of the beginnings the energy transition. [de

  4. The Production, Value, and Reduction Responsibility of Carbon Emissions through Electricity Consumption of Manufacturing Industries in South Korea and Thailand

    Science.gov (United States)

    Kitikun, Medhawin

    This dissertation provides a new method of measuring efforts by manufacturing industries to reduce their emissions by curtailing electricity consumption. Employing comprehensive firm-level data from the National Manufacture Annual Surveys of South Korea and Thailand, I construct the measure from estimates of revenue functions by industry. The data consists of firms from more than 20 industries in each year from 1982 to 2005 for Korea and from 2001 to 2008 for Thailand. With a total of more than two million observations, I estimate revenue functions for each industry and year. Here, I use three inputs: number of employees(L), fixed asset stock(K), and electricity consumption(E) and two types of functional forms to represent each industry's revenue function. Second, under market competitive condition, I find that profit maximizing firms deviated their level of electricity usage in production from the profit-maximizing level during the time period for both countries, and I develop a theoretical framework to explain this behavior. Then, I tested the theory using my empirical models. Results support the notion of a hidden environmental value expressed by firms in the form of voluntary deviations from profit-maximizing levels of input demand. The measure used is the gap between the marginal revenue product of electricity and its price. This gap should increase with income, consistent with the Environmental Kuznets Curve literature. My current model provides considerable support for this proposition. Estimates indicate, in most industries, a negative relationship between per-capita income and emissions. In the final section of the dissertation, I consider the equitable distribution of emissions reduction burden under an international agreement such as the reduction effort, Kyoto Protocol. Both developed and developing countries have to cut their emissions to a specific reduction percentage target. Domestically, I present two extreme scenarios. In the first scenario

  5. Optimal interval for major maintenance actions in electricity distribution networks

    Energy Technology Data Exchange (ETDEWEB)

    Louit, Darko; Pascual, Rodrigo [Centro de Mineria, Pontificia Universidad Catolica de Chile, Av. Vicuna MacKenna, 4860 Santiago (Chile); Banjevic, Dragan [Centre for Maintenance Optimization and Reliability Engineering, University of Toronto, 5 King' s College Rd., Toronto, Ontario (Canada)

    2009-09-15

    Many systems require the periodic undertaking of major (preventive) maintenance actions (MMAs) such as overhauls in mechanical equipment, reconditioning of train lines, resurfacing of roads, etc. In the long term, these actions contribute to achieving a lower rate of occurrence of failures, though in many cases they increase the intensity of the failure process shortly after performed, resulting in a non-monotonic trend for failure intensity. Also, in the special case of distributed assets such as communications and energy networks, pipelines, etc., it is likely that the maintenance action takes place sequentially over an extended period of time, implying that different sections of the network underwent the MMAs at different periods. This forces the development of a model based on a relative time scale (i.e. time since last major maintenance event) and the combination of data from different sections of a grid, under a normalization scheme. Additionally, extended maintenance times and sequential execution of the MMAs make it difficult to identify failures occurring before and after the preventive maintenance action. This results in the loss of important information for the characterization of the failure process. A simple model is introduced to determine the optimal MMA interval considering such restrictions. Furthermore, a case study illustrates the optimal tree trimming interval around an electricity distribution network. (author)

  6. The changing structure of the electric power industry: Selected issues, 1998

    International Nuclear Information System (INIS)

    1998-07-01

    More than 3,000 electric utilities in the United States provide electricity to sustain the Nation's economic growth and promote the well-being of its inhabitants. At the end of 1996, the net generating capability of the electric power industry stood at more than 776,000 megawatts. Sales to ultimate consumers in 1996 exceeded 3.1 trillion kilowatthours at a total cost of more than $210 billion. In addition, the industry added over 9 million new customers during the period from 1990 through 1996. The above statistics provide an indication of the size of the electric power industry. Propelled by events of the recent past, the industry is currently in the midst of changing from a vertically integrated and regulated monopoly to a functionally unbundled industry with a competitive market for power generation. Advances in power generation technology, perceived inefficiencies in the industry, large variations in regional electricity prices, and the trend to competitive markets in other regulated industries have all contributed to the transition. Industry changes brought on by this movement are ongoing, and the industry will remain in a transitional state for the next few years or more. During the transition, many issues are being examined, evaluated, and debated. This report focuses on three of them: how wholesale and retail prices have changed since 1990; the power and ability of independent system operators (ISOs) to provide transmission services on a nondiscriminatory basis; and how issues that affect consumer choice, including stranded costs and the determination of retail prices, may be handled either by the US Congress or by State legislatures

  7. The changing structure of the electric power industry: Selected issues, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    More than 3,000 electric utilities in the United States provide electricity to sustain the Nation`s economic growth and promote the well-being of its inhabitants. At the end of 1996, the net generating capability of the electric power industry stood at more than 776,000 megawatts. Sales to ultimate consumers in 1996 exceeded 3.1 trillion kilowatthours at a total cost of more than $210 billion. In addition, the industry added over 9 million new customers during the period from 1990 through 1996. The above statistics provide an indication of the size of the electric power industry. Propelled by events of the recent past, the industry is currently in the midst of changing from a vertically integrated and regulated monopoly to a functionally unbundled industry with a competitive market for power generation. Advances in power generation technology, perceived inefficiencies in the industry, large variations in regional electricity prices, and the trend to competitive markets in other regulated industries have all contributed to the transition. Industry changes brought on by this movement are ongoing, and the industry will remain in a transitional state for the next few years or more. During the transition, many issues are being examined, evaluated, and debated. This report focuses on three of them: how wholesale and retail prices have changed since 1990; the power and ability of independent system operators (ISOs) to provide transmission services on a nondiscriminatory basis; and how issues that affect consumer choice, including stranded costs and the determination of retail prices, may be handled either by the US Congress or by State legislatures.

  8. Applications of Expert Systems within the Scottish Electricity Supply Industry

    International Nuclear Information System (INIS)

    McWhirter, A.F.

    1990-01-01

    This paper describes the areas of application of Expert Systems within the South of Scotland Electricity Board (SSEB). The SSEB interest in Expert Systems was initiated by a fault in a conventional power station however the paper describes how the development associated with that work, has resulted in applications for the Nuclear Power Stations. The paper contrasts the cost benefits and project risks associated with the uses of probabilistic systems and concludes that the cost benefits of these are at present too low to justify their use in on-line applications

  9. Environmental exposures in the US electric utility industry

    International Nuclear Information System (INIS)

    Repetto, R.; Henderson, J.

    2003-01-01

    Quantitative analysis of 47 US investor-owned electric utilities' environmental exposures to impending air quality and climate policies shows potentially material and highly differentiated financial impacts. For many companies the minimized compliance costs of a four-pollutant cap-and-trade regulatory regime would be less than those of a three-pollutant regime that omitted controls on carbon dioxide emissions. Fragmented regulatory requirements would have the highest compliance costs. The companies studied vary considerably in the adequacy of their financial reporting of these potential impacts. Greater transparency would benefit investors and the most favorably positioned companies. (author)

  10. Testing Header Component of Electricity Power Industry Boiler

    International Nuclear Information System (INIS)

    Soedardjo, S.A; Andryansyah, B; Artahari, Dewi; Natsir, Muhammad; Triyadi, Ari; Farokhi

    2000-01-01

    Testing of header component of Suralaya Unit II electricity power by replication method has been carried out. That header component is cross over pipe which interconnection between Primary and Superheater Outlet Header Secondary Superheater Outlet Header with the operation time over 14 years. The main composition of cross over pipe is 2 1/4 Cr 1 Mo or frequently specified as ferritique steel. The replication testing shown that the damage classification on those cross over pipe in A class based on failure classification from Neubauer and Wedel. Simple calculation in favor of cross over pipe remaining lifetime is about 16.5 years moreover

  11. Reliability measurement for mixed mode failures of 33/11 kilovolt electric power distribution stations.

    Directory of Open Access Journals (Sweden)

    Faris M Alwan

    Full Text Available The reliability of the electrical distribution system is a contemporary research field due to diverse applications of electricity in everyday life and diverse industries. However a few research papers exist in literature. This paper proposes a methodology for assessing the reliability of 33/11 Kilovolt high-power stations based on average time between failures. The objective of this paper is to find the optimal fit for the failure data via time between failures. We determine the parameter estimation for all components of the station. We also estimate the reliability value of each component and the reliability value of the system as a whole. The best fitting distribution for the time between failures is a three parameter Dagum distribution with a scale parameter [Formula: see text] and shape parameters [Formula: see text] and [Formula: see text]. Our analysis reveals that the reliability value decreased by 38.2% in each 30 days. We believe that the current paper is the first to address this issue and its analysis. Thus, the results obtained in this research reflect its originality. We also suggest the practicality of using these results for power systems for both the maintenance of power systems models and preventive maintenance models.

  12. Specification errors in estimating cost functions: the case of the nuclear-electric-generating industry

    International Nuclear Information System (INIS)

    Jorgensen, E.J.

    1987-01-01

    This study is an application of production-cost duality theory. Duality theory is reviewed for the competitive and rate-of-return regulated firm. The cost function is developed for the nuclear electric-power-generating industry of the United States using capital, fuel, and labor factor inputs. A comparison is made between the Generalized Box-Cox (GBC) and Fourier Flexible (FF) functional forms. The GBC functional form nests the Generalized Leontief, Generalized Square Root Quadratic and Translog functional forms, and is based upon a second-order Taylor-series expansion. The FF form follows from a Fourier-series expansion in sine and cosine terms using the Sobolev norm as the goodness-of-fit measure. The Sobolev norm takes into account first and second derivatives. The cost function and two factor shares are estimated as a system of equations using maximum-likelihood techniques, with Additive Standard Normal and Logistic Normal error distributions. In summary, none of the special cases of the GBC function form are accepted. Homotheticity of the underlying production technology can be rejected for both GBC and FF forms, leaving only the unrestricted versions supported by the data. Residual analysis indicates a slight improvement in skewness and kurtosis for univariate and multivariate cases when the Logistic Normal distribution is used

  13. Regulatory review and barriers for the electricity supply system for distributed generation in EU-15

    DEFF Research Database (Denmark)

    Ropenus, Stephanie; Skytte, Klaus

    2005-01-01

    When distributed electricity supply surpasses a particular level, it can no longer be ignored in planning and operation of the electricity networks. Therefore, improvements of the regulatory framework of the electricity networks are required along with the growth of the electricity supply from di...... distributed generation. This paper reviews the current regulation of the grids with respect to distributed generation in EU-15 Member States and compares the different systems. Several barriers are identified.......When distributed electricity supply surpasses a particular level, it can no longer be ignored in planning and operation of the electricity networks. Therefore, improvements of the regulatory framework of the electricity networks are required along with the growth of the electricity supply from...

  14. Distribution of electric field and charge collection in silicon strip detectors

    International Nuclear Information System (INIS)

    Anokhin, I.E.; Zinets, O.S.

    1995-01-01

    The distribution of electric field in silicon strip detectors is analyzed in the case of dull depletion as well as for partial depletion. Influence of inhomogeneous electric fields on the charge collection and performances of silicon strip detectors is discussed

  15. Resolution 29/003. It approve the Regulation of quality electricity distribution service with annexes

    International Nuclear Information System (INIS)

    2004-01-01

    This decree approve the Regulation of quality electricity distribution service. It establishes that the public electricity service should be provided with an appropriate level of quality for the users

  16. Green pricing: Customer-oriented marketing of the electricity industry

    International Nuclear Information System (INIS)

    Weller, T.

    1998-01-01

    There are at present about 15 established projects launched by energy suppliers in Germany which deserve to be called ''green pricing'' marketing strategies, and about an equal number of further projects at various stages of development which also offer as a ''green'' incentive for customers electricity from renewable energy sources. Worldwide, there are about 50 established green pricing projects, offered primarily in the USA, Switzerland and the Netherlands, and in Germany. The targeted customers of these projects for the time being are exclusively households that cannot easily switch over to other than their local suppliers. It can be expected that with progressive market liberalisation in Great Britain, the USA and, finally, in Germany, competition for this customer group will rapidly increase the number of green pricing marketing projects in these countries. This is why the article here presents a thorough analysis of the specific features of green pricing contracts, their impact on enhanced development and application of the technology for electricity generation from renewables, and a forecast on future developments. (orig./CB) [de

  17. Organizational change, restructuring and downsizing: The experience of employees in the electric utility industry

    Science.gov (United States)

    Korns, Michael T.

    This research examines the experience of employees working in the electric utility industry during a time when it was undergoing significant transformation. It was undertaken to examine this phenomenon in the context of how the history and nature of the industry's environment, and specifically regulatory effect of regulation, led to an organizational form characterized by stability, structure and inertial resistance to change. A case study approach was used to examine the effect of deregulation on an organization in the industry, and specifically how their actions impacted employees working there. A phenomenological approach was used to explore employee perceptions of the organizational culture and employment relationship there both prior to and after implementation of a reorganization and downsizing that resulted in the first significant employee layoffs in the history of the organization. Data gathering consisted of conducting semi-structured interviews with current and former employees of the company who experienced the phenomena. Analysis of the data show that employees in this organization perceived an unusually strong psychological contract for stable employment and the expectation that it would continue, despite the prevalence of corporate downsizing and restructuring at the time. This psychological contract and the importance of career employment was found to be particularly significant for women who were hired during a period of time when gender and pregnancy discrimination was prevalent. Findings demonstrate that, given the historical stability and strong inertial resistance in the organization, company leadership did not effectively communicate the need, or prepare employees sufficiently for the significance of the changes or the effect they had on the organization. Findings also revealed that employees perceived the methods used to select individuals for layoff and exit from the company violated principles of organizational justice for distributional

  18. The regulatory treatment of adverse outcomes: Empirical evidence from the electric utility industry

    International Nuclear Information System (INIS)

    Ryan, N.E.

    1991-01-01

    This dissertation consists of two essays, both of them empirical studies using data from the US electric utility industry. Part I focuses on utilities' investment behavior, while Part II examines regulatory policy toward the industry. The first paper presents an analysis of utilities' decisions about whether to continue or cancel nuclear construction projects. During the seventies and eighties, changes in economic conditions and regulatory policy radically altered the costs and benefits of nuclear power. This study seeks to determine whether regulators pursued policies which induced utilities to employ socially efficient criteria in re-evaluating ongoing projects. The analysis also yields insights into regulators' distributional goals. Results based on data for 1978-84 are consistent with the capture theory hypothesis, which holds that regulators weigh industry interests more heavily than consumer interests. A test for structural change provides no support for the contention that the relative importance of consumer interests increased over this period. These empirical findings are inconsistent with a standard (and essential) assumption of theoretical principal-agent models of rate-of-return regulation, that regulators value consumers' payoffs more than utility profits. The second paper examines regulatory policy toward generating facilities that entered commercial service during the years 1983-88. In a significant departure from past practice, state public utility commissions often denied utilities full recovery of their investments in new plants. Although such ex post disallowances have an important efficiency rationale, they also provide a means for opportunistic regulators to effect transfers between utilities' ratepayers and shareholders. A probit model was used to assess the impact on the probability of a disallowance of firm and project characteristics as well as attributes of a state's political and institutional environment

  19. Distributed Flexibility Management Targeting Energy Cost and Total Power Limitations in Electricity Distribution Grids

    DEFF Research Database (Denmark)

    Bessler, Sanford; Kemal, Mohammed Seifu; Silva, Nuno

    2018-01-01

    Demand Management uses the interaction and information exchange between multiple control functions in order to achieve goals that can vary in different application contexts. Since there are several stakeholders involved, these may have diverse objectives and even use different architectures...... to actively manage power demand. This paper utilizes an existing distributed demand management architecture in order to provide the following contributions: (1) It develops and evaluates a set of algorithms that combine the optimization of energy costs in scenarios of variable day-ahead prices with the goal...... to improve distribution grid operation reliability, here implemented by a total Power limit. (2) It evaluates the proposed scheme as a distributed system where flexibility information is exchanged with the existing industry standard OpenADR. A Hardware-in-the-Loop testbed realization demonstrates...

  20. Pomen managementa na dereguliranem maloprodajnem trgu električne energije v Sloveniji = The Importance of Management in the Deregulated Retail Electricity Distribution Market in Slovenia

    Directory of Open Access Journals (Sweden)

    Drago Papler

    2006-12-01

    Full Text Available This paper underlines the importance of management in the deregulated retail electricity distribution market, entrepreneurship and business behaviours toward consumers’ satisfaction with quality of services. The coefficients of concentration indicate a high concentration of electricity suppliers and users in the deregulated electricity retail market for industry. The production function reveals the importance of education and electricity infrastructure, and to a lesser extent of capital intensity, in labour productivity growth in the retail electricity distribution enterprise. Electricity demand in industry is determined positively by real income growth and negatively by real electricity price increases. Multivariate factor analysis confirms two main common components of efficient retail electricity supply and satisfaction of consumers in industry. In the first group of factors of efficient retail electricity supply the highest weights are for consumption, quality of services, expenses and advice. In the second group of factors of consumers’ satisfaction the highest weights are for response, needs, reliability and personnel. The impacts of changes in the dynamics of competition in the deregulated retail electricity market on management and organisational behaviours are found significant for quality of services, marketing and marketing strategies, supply-chain and customer relationship management.