Nutrient discharge from China’s aquaculture industry and associated environmental impacts

Science.gov (United States)

Zhang, Ying; Bleeker, Albert; Liu, Junguo

2015-04-01

China’s aquaculture industry accounts for the largest share of the world’s fishery production, and provides a principal source of protein for the nation’s booming population. However, the environmental effects of the nutrient loadings produced by this industry have not been systematically studied or reviewed. Few quantitative estimates exist for nutrient discharge from aquaculture and the resultant nutrient enrichment in waters and sediments. In this paper, we evaluate nutrient discharge from aquacultural systems into aquatic ecosystems and the resulting nutrient enrichment of water and sediments, based on data from 330 cases in 51 peer-reviewed publications. Nitrogen use efficiency ranged from 11.7% to 27.7%, whereas phosphorus use efficiency ranged from 8.7% to 21.2%. In 2010, aquacultural nutrient discharges into Chinese aquatic ecosystems included 1044 Gg total nitrogen (184 Gg N from mariculture; 860 Gg N freshwater culture) and 173 Gg total phosphorus (22 Gg P from mariculture; 151 Gg P from freshwater culture). Water bodies and sediments showed high levels of nutrient enrichment, especially in closed pond systems. However, this does not mean that open aquacultural systems have smaller nutrient losses. Improvement of feed efficiency in cage systems and retention of nutrients in closed systems will therefore be necessary. Strategies to increase nutrient recycling, such as integrated multi-trophic aquaculture, and social measures, such as subsidies, should be increased in the future. We recommend the recycling of nutrients in water and sediments by hybrid agricultural-aquacultural systems and the adoption of nutrient use efficiency as an indicator at farm or regional level for the sustainable development of aquaculture; such indicators; together with water quality indicators, can be used to guide evaluations of technological, policy, and economic approaches to improve the sustainability of Chinese aquaculture.

Characterization of stormwater discharges from Las Flores Industrial Park, Rio Grande, Puerto Rico, 1998-99

Science.gov (United States)

Rodriguez, Jose M.

2000-01-01

Stormwater discharges from Las Flores Industrial Park, Rio Grande, Puerto Rico, were characterized from June 1998 to July 1999 by measuring the flow rate at two outfalls, delineating the drainage areas for each outfall, and calculating the volume of the stormwater discharges. Stormwater-discharge samples were collected and analyzed to determine the quality of the discharges. Constituent loads and loads per area were estimated for each drainage area. The studied drainage subareas covered approximately 46 percent of the total area of the Las Flores Industrial Park. Industrial groups represented in the study areas include manufacturers of textile, electronics, paper, fabricated metal, plastic, and chemical products. The concentrations of oil and grease (1 to 6 milligrams per liter), biochemical oxygen demand (4.7 to 16 milligrams per liter), total organic carbon (5.8 to 36 milligrams per liter), total suspended solids (28 to 100 milligrams per liter), and total phosphorous (0.11 to 0.78 milligrams per liter) from all the samples collected were less than the U.S. Environmental Protection Agency stormwater benchmark concentrations. Concentrations of chemical oxygen demand (15.8 to 157 milligrams per liter) and nitrate and nitrite (0.06 to 1.75 milligrams per liter) exceeded benchmark concentrations at one of the studied drainage areas. Total Kjeldahl nitrogen concentrations (1.00 to 3.20 milligrams per liter) exceeded the benchmark concentrations at the two studied drainage areas. Maximum concentrations for oil and grease, biochemical oxygen demand, chemical oxygen demand, total organic carbon, total Kjeldahl nitrogen, nitrate plus nitrite, and total phosphorous were detected in an area where electronics, plastics, and chemical products are currently manufactured. The maximum concentration of total suspended solids was detected at an area where textile, paper, plastic, chemical, and fabricated metal products are manufactured.

Assessing the impacts of industrial water use in Life Cycle Assessment

DEFF Research Database (Denmark)

Lévová, Tereza; Hauschild, Michael Zwicky

2011-01-01

Use of freshwater gives rise to important environmental impacts to consider in the sustainability analysis of an industry or a product. Water use impacts are highly dependent on the local or regional conditions, and apart from the quantity that is extracted and used, the impact of the freshwater...... use also depends on the local sensitivity to freshwater extraction, and the change in the quality from water intake to discharge of the usedwater. A methodology is presented catering to these characteristics of the water use issue and demonstrated on an industrial case study from the biotech industry....

Discharges of radioactive materials to the environment in Argentina

CERN Document Server

Curti, A R

2003-01-01

The International Atomic Energy Agency (IAEA) is creating a database of information on radioactive discharges to atmospheric and aquatic environments from nuclear and radioactive installations, and from facilities using radionuclides in medicine, industry and research. The database is expected to facilitate the analysis of worldwide trends in discharge levels and provide a basis for assessing the impact of the discharges on humans and on the environment. In November 2002 took place the first meeting of national contact points and the Nuclear Regulatory Authority (ARN in Spanish) was present as the counterpart for the provision of discharge data from Argentina. This paper, presented in the above mentioned meeting, is a general overview of the radioactive discharges control in Argentina including the legal infrastructure, the population dose assessment methodology and the main characteristics of the facilities in the country with radioactive discharges to the environment. It is mentioned their location, release...

Treatment and Reuse of Wastewaters Discharged by Petroleum Industries (HMD/Algeria)

Energy Technology Data Exchange (ETDEWEB)

Sellami, MH, E-mail: sellami2000dz@gmail.com [Process Engineering Department, Laboratory of Process Engineering, Ouargla University (Algeria); Loudiyi, K [Renewable Energies Laboratory (REL) Al Akhawayne University, Ifrane (Morocco); Boubaker, MC; Habbaz, H [Process Engineering Department, Laboratory of Process Engineering, Ouargla University (Algeria)

2015-12-23

Industrial wastewaters discharged by petroleum industries contains: oil, heavy metals and chemicals used in the process of oil separation and treatment. These waters are a source of soil, water and air pollution, and lead a mortal danger to the ecosystem. Our aim in this work has an aspect that can contribute to the collective effort to address the enormous amount of water purges storage bins and reuse them to avoid any environmental damage. This was achieved by chemical treating of these wastewaters discharged from three different locations of Hassi Messaoud (HMD) petroleum field by flocculation with (C-5563) followed by coagulation with (C-2061) using two different acids as sequestering namely: Ascorbic and Citric acid. After experiments, the results showed that the wastewater can be treated without sequestering by adding 40 ppm of activated silicates. The best result was obtained by addition of 160 ppm of Ascorbic acid as sequestering agent and 20 ppm of activated silicates; resulting in removal of 92.81 % of suspended matter and 95.53 % of turbidity. Finally we concluded that this wastewater was satisfactorily treated and we recommend either inject it for enhanced oil recovery in industrial closest field (North field) to maintain the reservoir pressure and the improved rate recovery of oil reserves or reuse it in garden irrigation. In order to see the impact of the treated water on plants, irrigation tests have conducted on two types of plants (date palm and shaft apocalyptic) for one year. The tests showed that the thick layer of 5 cm and 0.08mm of particles diameter of dune sand removes most of remaining oil. The sand layer that fills the basin surrounding the shaft is removed and replaced every 06 months. So, Dune sand plays the role of natural filter. The garden plants appear and grow normally.

Treatment and Reuse of Wastewaters Discharged by Petroleum Industries (HMD/Algeria)

International Nuclear Information System (INIS)

Sellami, MH; Loudiyi, K; Boubaker, MC; Habbaz, H

2015-01-01

Industrial wastewaters discharged by petroleum industries contains: oil, heavy metals and chemicals used in the process of oil separation and treatment. These waters are a source of soil, water and air pollution, and lead a mortal danger to the ecosystem. Our aim in this work has an aspect that can contribute to the collective effort to address the enormous amount of water purges storage bins and reuse them to avoid any environmental damage. This was achieved by chemical treating of these wastewaters discharged from three different locations of Hassi Messaoud (HMD) petroleum field by flocculation with (C-5563) followed by coagulation with (C-2061) using two different acids as sequestering namely: Ascorbic and Citric acid. After experiments, the results showed that the wastewater can be treated without sequestering by adding 40 ppm of activated silicates. The best result was obtained by addition of 160 ppm of Ascorbic acid as sequestering agent and 20 ppm of activated silicates; resulting in removal of 92.81 % of suspended matter and 95.53 % of turbidity. Finally we concluded that this wastewater was satisfactorily treated and we recommend either inject it for enhanced oil recovery in industrial closest field (North field) to maintain the reservoir pressure and the improved rate recovery of oil reserves or reuse it in garden irrigation. In order to see the impact of the treated water on plants, irrigation tests have conducted on two types of plants (date palm and shaft apocalyptic) for one year. The tests showed that the thick layer of 5 cm and 0.08mm of particles diameter of dune sand removes most of remaining oil. The sand layer that fills the basin surrounding the shaft is removed and replaced every 06 months. So, Dune sand plays the role of natural filter. The garden plants appear and grow normally

Decomposition Analysis of Wastewater Pollutant Discharges in Industrial Sectors of China (2001–2009 Using the LMDI I Method

Directory of Open Access Journals (Sweden)

Beidou Xi

2012-06-01

Full Text Available China’s industry accounts for 46.8% of the national Gross Domestic Product (GDP and plays an important strategic role in its economic growth. On the other hand, industrial wastewater is also the major source of water pollution. In order to examine the relationship between the underlying driving forces and various environmental indicators, values of two critical industrial wastewater pollutant discharge parameters (Chemical Oxygen Demand (COD and ammonia nitrogen (NH₄-N, between 2001 and 2009, were decomposed into three factors: i.e., production effects (caused by change in the scale of economic activity, structure effects (caused by change in economic structure and intensity effects (caused by change in technological level of each sector, using additive version of the Logarithmic Mean Divisia Index (LMDI I decomposition method. Results showed that: (1 the average annual effect of COD discharges in China was −2.99%, whereas the production effect, the structure effect, and the intensity effect were 14.64%, −1.39%, and −16.24%, respectively. Similarly, the average effect of NH₄-N discharges was −4.03%, while the production effect, the structure effect, and the intensity effect were 16.18%, −2.88%, and −17.33%, respectively; (2 the production effect was the major factor responsible for the increase in COD and NH₄-N discharges, accounting for 45% and 44% of the total contribution, respectively; (3 the intensity effect, which accounted for 50% and 48% of the total contribution, respectively, exerted a dominant decremental effect on COD and NH₄-N discharges; intensity effect was further decomposed into cleaner production effect and pollution abatement effect with the cleaner production effect accounting for 60% and 55% of the reduction of COD and NH₄-N, respectively; (4 the major contributors to incremental COD and NH₄-N discharges were divided among industrial sub

Discharges of radioactive materials to the environment in Argentina

International Nuclear Information System (INIS)

Curti, Adriana R.

2003-01-01

The International Atomic Energy Agency (IAEA) is creating a database of information on radioactive discharges to atmospheric and aquatic environments from nuclear and radioactive installations, and from facilities using radionuclides in medicine, industry and research. The database is expected to facilitate the analysis of worldwide trends in discharge levels and provide a basis for assessing the impact of the discharges on humans and on the environment. In November 2002 took place the first meeting of national contact points and the Nuclear Regulatory Authority (ARN in Spanish) was present as the counterpart for the provision of discharge data from Argentina. This paper, presented in the above mentioned meeting, is a general overview of the radioactive discharges control in Argentina including the legal infrastructure, the population dose assessment methodology and the main characteristics of the facilities in the country with authorized radioactive discharges to the environment. It is mentioned their location, release mode, surface water body type, main radionuclides and typical annual release activities. (author)

Assessment of long-term effects of radionuclides discharged from a phosphate ore processing plant to the environment

International Nuclear Information System (INIS)

Degetti, S.; Mazzoti, D.; Dall'Ara, S.; DeJoanna, C.

1997-01-01

The Northern Adriatic Sea was interested by continuous direct discharge of phosphogypsum from a local phosphate fertilizer industry up to 1985 following a productive activity of about twenty years.As it is known, due to the remarkable amounts of natural radioactivity connected with the productive cycle of fertilizers from phosphate ores, the release to the environment of huge amounts of potentially hazardous wastes might be in principle of major radioecological concern.In this respect Ra-226 and its decay products are expected to be the main responsible of radioactivity background enhancement.Taking into account that discharge at sea (depth 30-35 m) was interrupted over ten years ago, following the closing of the plant, the main scope of this investigation was to assess the long-term effect of the disposal of phosphogypsum in the marine environment and in particular the possible enrichment of the radioactive fraction after solubilization of the gypsum carrier. In order to assess the actual radioecological influence of discharged slurries on the marine environment a preliminary sampling was carried out.Radioactivity data obtained from sediment cores clearly indicate anomalies in respect to typical 'background' values obtained from homologous samples collected in an unaffected area in proximity of the disposal site.As an example, Ra-226 activities in sediment were found to be one hundred fold higher than natural background.Radioactivity data from sediments cores collected in sites interested by bottom sea currents coming from discharge area will be also reported and discussed.(authors)

Assessment of the level of chromium species in the discharged ...

African Journals Online (AJOL)

The purpose of this study was to assess the level of chromium species in the discharged effluents of selected tanneries in the Amhara Region; Haik and Debre Berhan tanneries. The level of total chromium, and hexavalent chromium in the discharged effluent of the studied tanneries were determined using the ICP-OES, and ...

Geothermal industry assessment

Energy Technology Data Exchange (ETDEWEB)

1980-07-01

An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

Industrial Assessment Center Program Impact Evaluation

Energy Technology Data Exchange (ETDEWEB)

Martin, M.A.

2000-01-26

This report presents the results of an evaluation of the U.S. Department of Energy's Industrial Assessment Center (IAC) Program. The purpose of this program is to conduct energy, waste, and productivity assessments for small to medium-sized industrial firms. Assessments are conducted by 30 university-based industrial assessment centers. The purpose of this project was to evaluate energy and cost savings attributable to the assessments, the trained alumni, and the Websites sponsored by this program. How IAC assessments, alumni, and Web-based information may influence industrial energy efficiency decision making was also studied. It is concluded that appreciable energy and cost savings may be attributed to the IAC Program and that the IAC Program has resulted in more active and improved energy-efficiency decision making by industrial firms.

Industrial water resources management based on violation risk analysis of the total allowable target on wastewater discharge.

Science.gov (United States)

Yue, Wencong; Cai, Yanpeng; Xu, Linyu; Yang, Zhifeng; Yin, Xin'An; Su, Meirong

2017-07-11

To improve the capabilities of conventional methodologies in facilitating industrial water allocation under uncertain conditions, an integrated approach was developed through the combination of operational research, uncertainty analysis, and violation risk analysis methods. The developed approach can (a) address complexities of industrial water resources management (IWRM) systems, (b) facilitate reflections of multiple uncertainties and risks of the system and incorporate them into a general optimization framework, and (c) manage robust actions for industrial productions in consideration of water supply capacity and wastewater discharging control. The developed method was then demonstrated in a water-stressed city (i.e., the City of Dalian), northeastern China. Three scenarios were proposed according to the city's industrial plans. The results indicated that in the planning year of 2020 (a) the production of civilian-used steel ships and machine-made paper & paperboard would reduce significantly, (b) violation risk of chemical oxygen demand (COD) discharge under scenario 1 would be the most prominent, compared with those under scenarios 2 and 3, (c) the maximal total economic benefit under scenario 2 would be higher than the benefit under scenario 3, and (d) the production of rolling contact bearing, rail vehicles, and commercial vehicles would be promoted.

Assessment of the Impact of Industrial Effluents on Groundwater Quality in Okhla Industrial Area, New Delhi, India

Directory of Open Access Journals (Sweden)

Wequar Ahmad Siddiqui

2009-01-01

Full Text Available In the present study physicochemical parameters like pH, hardness, TDS, chloride, sulphate, nitrate, fluoride, DO, COD and conductivity of some important heavy metals such as iron, cobalt, cadmium, lead, mercury, chromium, selenium and arsenic were first analyzed in effluent water of Okhla industrial area phase-II and then groundwater of near by areas. Obtained values of effluent water were compared with ISI standard for effluent water discharge and groundwater values were compared with ISI and WHO drinking water standards. The result shows that discharge of untreated effluents by the industries is leading to contamination of groundwater of the surrounding areas. Lead, mercury, fluoride, TDS, sulphate was above the desirable limit in effluent water (ISI standard for effluent water discharge. Subsequent analysis of groundwater of nearby areas was rated as unacceptable for drinking because of presence of fluoride in all the samples above the desirable limit. Lead, mercury, cadmium, chloride was also detected in many samples.

Industrial Assessment Center (IAC) Operations Manual

Energy Technology Data Exchange (ETDEWEB)

Gopalakrishnan, Bhaskaran [West Virginia Univ., Morgantown, WV (United States); Nimbalkar, Sachin U. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wenning, Thomas J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Thirumaran, Kiran [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-04-01

IAC Operations Manual describes organizational model and operations of the Industrial Assessment Center (IAC), Center management activities, typical process of energy assessment, and energy assessment data for specific industry sectors.

State Waste Discharge Permit application for industrial discharge to land: 200 East Area W-252 streams

International Nuclear Information System (INIS)

1993-12-01

This document constitutes the WAC 173-216 State Waste Discharge Permit application for six W-252 liquid effluent streams at the Hanford Site. Appendices B through H correspond to Section B through H in the permit application form. Within each appendix, sections correspond directly to the respective questions on the application form. The appendices include: Product or service information; Plant operational characteristics; Water consumption and waterloss; Wastewater information; Stormwater; Other information; and Site assessment

Risk assessment for produced water discharges to Louisiana Open Bays

Energy Technology Data Exchange (ETDEWEB)

Meinhold, A.F.; DePhillips, M.P.; Holtzman, S.

1995-06-23

Data were collected prior to termination of discharge at three sites (including two open bay sites at Delacroix Island and Bay De Chene) for the risk assessments. The Delacroix Island Oil and Gas Field has been in production since the first well drilling in 1940; the Bay De Chene Field, since 1942. Concentrations of 226Ra, 228Ra, 210Po, and 228Th were measured in discharges. Radium conc. were measured in fish and shellfish tissues. Sediment PAH and metal conc. were also available. Benthos sampling was conducted. A survey of fishermen was conducted. The tiered risk assessment showed that human health risks from radium in produced water appear to be small; ecological risk from radium and other radionuclides in produced water also appear small. Many of the chemical contaminants discharged to open Louisiana bays appear to present little human health or ecological risk. A conservative screening analysis suggested potential risks to human health from Hg and Pb and a potential risk to ecological receptors from total effluent, Sb, Cd, Cu, Pb, Ni, Ag, Zn, and phenol in the water column and PAHs in sediment; quantitiative risk assessments are being done for these contaminants.

Simultaneous measurement of ignition energy and current signature for brush discharges

International Nuclear Information System (INIS)

Fast, Lars; Andersson, Birgitta; Smallwood, Jeremy; Holdstock, Paul; Paasi, Jaakko

2011-01-01

Accurate prediction of the probability of ignition arising from charged insulators is a crucial element of risk assessment in process industry. Incendiary brush discharges can occur when a large or grounded conductor approaches a charged insulator in the presence of a flammable atmosphere. This paper describes ignition tests based on an IEC standard method and simultaneously recorded temporal distribution of current released in the discharges, using a discharge probe integrated with the ignition probe. Ignition and non-ignition results are compared with peak discharge current and charge transferred in the discharge. No clear ignition threshold was found for either of these parameters. No major differences were found between igniting and non-igniting waveforms.

Impact of oil on the marine environment: policy of the Paris Commission on operational discharges from the offshore industry

International Nuclear Information System (INIS)

Nihoul, C.; Ducrotoy, J.-P.

1994-01-01

The input of oil to the North Sea due to the offshore industry has been estimated at 29% of the total input of oil. The operational discharges consist of production water and drilling cuttings. An overview of statistics collected over the last 10 years shows that although the amount of oil discharged via production water is increasing as platforms are getting older, cuttings still account for 75% of the oil entering the sea as a result of normal operations. Spills represent a relatively small source of oil. The effects on the marine environment of discharges of production water and of discarded oily cuttings have been extensively studied, by national authorities as well as by the industry. Although it has not always been possible to reach consensus about the significance of the observed effects, a number of 'agreed facts' have led to the establishment of regulations in the framework of the Paris Commission. The 'decisions' and 'recommendations' adopted by the Commission are regularly reviewed in the light of new developments. (author)

Collective dose to the European Community from nuclear industry effluents discharge in 1978

CERN Document Server

Camplin, W C

1983-01-01

The results are presented of a study to evaluate the collective dose commitment to the population of the European Community from effluents released by the nuclear industry within the EC in 1978. Airborne and liquid effluent discharge data have been taken from published sources, and computer modelling techniques have been used to predict the transfer of radioactivity through the environment to man. The collective dose commitments due to discharges from each nuclear installation have been evaluated and the comparative significance of individual radionuclides and their pathways to man have been considered. Airborne releases resulted in an estimated collective effective dose equivalent commitment of 95 man Sv, the major part of which is due to carbon-14 from both power stations and reprocessing plants. The collective effective dose equivalent commitment from liquid effluents is estimated to be 408 man Sv, mostly due to caesium-137 and other radionuclides from the Sellafield (formerly Windscale) reprocessing plant...

Cross-linked cyclodextrin-based material for treatment of metals and organic substances present in industrial discharge waters

Directory of Open Access Journals (Sweden)

Élise Euvrard

2016-08-01

Full Text Available In this study, a polymer, prepared by crosslinking cyclodextrin (CD by means of a polycarboxylic acid, was used for the removal of pollutants from spiked solutions and discharge waters from the surface treatment industry. In spiked solutions containing five metals, sixteen polycyclic aromatic hydrocarbons (PAH and three alkylphenols (AP, the material exhibited high adsorption capacities: >99% of Co2+, Ni2+ and Zn2+ were removed, between 65 and 82% of the PAHs, as well as 69 to 90% of the APs. Due to the structure of the polymer and its specific characteristics, such as the presence of carboxylic groups and CD cavities, the adsorption mechanism involves four main interactions: ion exchange, electrostatic interactions and precipitation for metal removal, and inclusion complexes for organics removal. In industrial discharge waters, competition effects appeared, especially because of the presence of calcium at high concentrations, which competed with other pollutants for the adsorption sites of the adsorbent.

Industries processing naturally occurring radioactive materials: twenty years of emission data in the Netherlands

International Nuclear Information System (INIS)

Tanzi, C.P.

2008-01-01

This paper provides a review of the dose assessment of discharges to air of two industries processing NORM (Naturally Occurring Radioactive Materials) in the Netherlands. An industrial plant producing elemental phosphorus (thermal process, unique within Europe) reports since 1987 its emission data to the Dutch Ministry of the Environment (VROM: Ministry of Housing, Spatial Planning and the Environment). This plant accounts for the highest release of Po-210 to air in the Netherlands, with a yearly average of approximately 500 GBq. Other significant NORM discharges to air arise from an industrial plant with blast-furnaces for steel production. Yearly discharges fall under permit, and are reported, since 1993. RIVM, the National Institute for Public Health and the Environment, is tasked by the Ministry to assess the dose to the general public arising from these discharges to air. Air transport modelling is used to determine both air concentration (for inhalation exposure) and deposition rate of the radionuclides. A (conservative) committed ingestion dose is determined by modelling the uptake of radionuclides from contaminated farmland, and assuming a food basket to be fairly representative for the population of the Netherlands. Discharges to water in the Netherlands have decreased in the past twenty years, due both to the closure of two phosphoric acid plants a decade ago and the improved treatment of waste fluids by other NORM industries. The collective dose assessed from discharges to air since 1987 is presented here. (author)

Multi-perspective comparisons and mitigation implications of SO2 and NO x discharges from the industrial sector of China: a decomposition analysis.

Science.gov (United States)

Jia, Junsong; Gong, Zhihai; Gu, Zhongyu; Chen, Chundi; Xie, Dongming

2018-04-01

This study is the first attempt to investigate the drivers of Chinese industrial SO 2 and NO x emissions from both periodic and structural perspectives through a decomposition analysis using the logarithmic mean Divisia index (LMDI). The two pollutants' emissions were decomposed into output effects, structural effects, clean production effects, and pollution abatement effects. The results showed that China's industrial SO 2 discharge increased by 1.14 Mt during 2003-2014, and the contributions from the four effects were 23.17, - 1.88, - 3.80, and - 16.36 Mt, respectively. Likewise, NO x discharge changed by - 3.44 Mt over 2011-2014, and the corresponding contributions from the four effects were 2.97, - 0.62, - 1.84, and - 3.95 Mt. Thus, the output effect was mainly responsible for the growth of the two discharges. The average annual contribution rates of SO 2 and NO x from output were 14.33 and 5.97%, respectively, but pollution abatement technology presented the most obvious mitigating effects (- 10.11 and - 7.92%), followed by the mitigating effects of clean production technology (- 2.35 and - 3.7%), and the mitigation from the structural effect was the weakest (- 1.16 and - 1.25%, respectively), which meant pollutant reduction policies related to industrial structure adjustment should be a long-term measure for the two discharges. In addition, the sub-sectors of I20 (manufacture of raw chemical materials and chemical products), I24 (manufacture of non-metallic mineral products), and I26 (smelting and pressing of non-ferrous metals) were the major contributors to both discharges. Thus, these sub-sectors should be given priority consideration when designing mitigation-related measures. Last, some particular policy implications were recommended for reducing the two discharges, including that the government should seek a technological discharge reduction route.

Whole effluent assessment of industrial wastewater for determination of BAT compliance. Part 2: metal surface treatment industry.

Science.gov (United States)

Gartiser, Stefan; Hafner, Christoph; Hercher, Christoph; Kronenberger-Schäfer, Kerstin; Paschke, Albrecht

2010-06-01

Toxicity testing has become a suitable tool for wastewater evaluation included in several reference documents on best available techniques of the Integrated Pollution Prevention and Control (IPPC) Directive. The IPPC Directive requires that for direct dischargers as well as for indirect dischargers, the same best available techniques should be applied. Within the study, the whole effluent assessment approach of OSPAR has been applied for determining persistent toxicity of indirectly discharged wastewater from the metal surface treatment industry. Twenty wastewater samples from the printed circuit board and electroplating industries which indirectly discharged their wastewater to municipal wastewater treatment plants (WWTP) have been considered in the study. In all factories, the wastewater partial flows were separated in collecting tanks and physicochemically treated in-house. For assessing the behaviour of the wastewater samples in WWTPs, all samples were biologically pretreated for 7 days in the Zahn-Wellens test before ecotoxicity testing. Thus, persistent toxicity could be discriminated from non-persistent toxicity caused, e.g. by ammonium or readily biodegradable compounds. The fish egg test with Danio rerio, the Daphnia magna acute toxicity test, the algae test with Desmodesmus subspicatus, the Vibrio fischeri assay and the plant growth test with Lemna minor have been applied. All tests have been carried out according to well-established DIN or ISO standards and the lowest ineffective dilution (LID) concept. Additionally, genotoxicity was tested in the umu assay. The potential bioaccumulating substances (PBS) were determined by solid-phase micro-extraction and referred to the reference compound 2,3-dimethylnaphthalene. The chemical oxygen demand (COD) and total organic carbon (TOC) values of the effluents were in the range of 30-2,850 mg L(-1) (COD) and 2-614 mg L(-1) (TOC). With respect to the metal concentrations, all samples were not heavily polluted. The

Environmental assessment: Industry perspective

International Nuclear Information System (INIS)

Meadley, T.

1994-01-01

The Canadian mining industry supports the concept of environmental assessment, but the current process at the time of the conference had a number of problems that the industry felt should be addressed. The author makes the following suggestions: that the process for individual projects should be separated from policy issues; that panel members should be drawn from a full-time staff; that there should be better referral criteria to determine which projects require full scale assessment including public hearings; that either the government or project opponents should participate but not both; that the financial burden on proponents should be reduced; that funding of intervenors should be controlled; that there should be a definite time frame

Projections of spent fuel to be discharged by the U.S. nuclear power industry

International Nuclear Information System (INIS)

Alexander, C.W.; Kee, C.W.; Croff, A.G.; Blomeke, J.O.

1977-10-01

Calculated properties of spent fuel projected to be discharged and accumulated by the U.S. nuclear power industry through the year 2031 A.D. are presented. The projections are based on installed nuclear capacities of 380 and 543 GW(e) in the year 2000 and 2030, respectively. They include compilations of the grams of the elements, curies of radioactivity, thermal decay power, photon and neutron emission rates, and radiotoxicities of the assemblies that are accumulated at a Spent Unreprocessed Fuel Facility (SURFF), allowing for delays of 5 and 10 years before shipment to SURFF

Projections of spent fuel to be discharged by the U. S. nuclear power industry

Energy Technology Data Exchange (ETDEWEB)

Alexander, C.W.; Kee, C.W.; Croff, A.G.; Blomeke, J.O.

1977-10-01

Calculated properties of spent fuel projected to be discharged and accumulated by the U.S. nuclear power industry through the year 2031 A.D. are presented. The projections are based on installed nuclear capacities of 380 and 543 GW(e) in the year 2000 and 2030, respectively. They include compilations of the grams of the elements, curies of radioactivity, thermal decay power, photon and neutron emission rates, and radiotoxicities of the assemblies that are accumulated at a Spent Unreprocessed Fuel Facility (SURFF), allowing for delays of 5 and 10 years before shipment to SURFF.

The Development and Evaluation of a Novel Instrument Assessing Residents' Discharge Summaries.

Science.gov (United States)

Hommos, Musab S; Kuperman, Ethan F; Kamath, Aparna; Kreiter, Clarence D

2017-04-01

To develop and determine the reliability of a novel measurement instrument assessing the quality of residents' discharge summaries. In 2014, the authors created a discharge summary evaluation instrument based on consensus recommendations from national regulatory bodies and input from primary care providers at their institution. After a brief pilot, they used the instrument to evaluate discharge summaries written by first-year internal medicine residents (n = 24) at a single U.S. teaching hospital during the 2013-2014 academic year. They conducted a generalizability study to determine the reliability of the instrument and a series of decision studies to determine the number of discharge summaries and raters needed to achieve a reliable evaluation score. The generalizability study demonstrated that 37% of the variance reflected residents' ability to generate an adequate discharge summary (true score variance). The decision studies estimated that the mean score from six discharge summary reviews completed by a unique rater for each review would yield a reliability coefficient of 0.75. Because of high interrater reliability, multiple raters per discharge summary would not significantly enhance the reliability of the mean rating. This evaluation instrument reliably measured residents' performance writing discharge summaries. A single rating of six discharge summaries can achieve a reliable mean evaluation score. Using this instrument is feasible even for programs with a limited number of inpatient encounters and a small pool of faculty preceptors.

Characterization of mean transit time at large springs in the Upper Colorado River Basin, USA: A tool for assessing groundwater discharge vulnerability

Science.gov (United States)

Solder, John; Stolp, Bernard J.; Heilweil, Victor M.; Susong, David D.

2016-01-01

Environmental tracers (noble gases, tritium, industrial gases, stable isotopes, and radio-carbon) and hydrogeology were interpreted to determine groundwater transit-time distribution and calculate mean transit time (MTT) with lumped parameter modeling at 19 large springs distributed throughout the Upper Colorado River Basin (UCRB), USA. The predictive value of the MTT to evaluate the pattern and timing of groundwater response to hydraulic stress (i.e., vulnerability) is examined by a statistical analysis of MTT, historical spring discharge records, and the Palmer Hydrological Drought Index. MTTs of the springs range from 10 to 15,000 years and 90 % of the cumulative discharge-weighted travel-time distribution falls within the range of 2−10,000 years. Historical variability in discharge was assessed as the ratio of 10–90 % flow-exceedance (R 10/90%) and ranged from 2.8 to 1.1 for select springs with available discharge data. The lag-time (i.e., delay in discharge response to drought conditions) was determined by cross-correlation analysis and ranged from 0.5 to 6 years for the same select springs. Springs with shorter MTTs (<80 years) statistically correlate with larger discharge variations and faster responses to drought, indicating MTT can be used for estimating the relative magnitude and timing of groundwater response. Results indicate that groundwater discharge to streams in the UCRB will likely respond on the order of years to climate variation and increasing groundwater withdrawals.

Assessment of prospective foodchain doses from radioactive discharges from BNFL Sellafield

International Nuclear Information System (INIS)

Ould-Dada, Z.; Tucker, S.; Webbe-Wood, D.; Mondon, K.; Hunt, J.

2002-01-01

This paper presents the method used by the UK Food Standards Agency (FSA) to assess the potential impact of proposed radioactive discharges from the Sellafield nuclear site on food and determine their acceptability. It explains aspects of a cautious method that has been adopted to reflect the UK government policy and uncertainties related to people's habits with regard to food production and consumption. Two types of ingestion doses are considered in this method: 'possible' and 'probable' doses. The method is specifically applied to Sellafield discharge limits and calculated possible and probable ingestion doses are presented and discussed. Estimated critical group ingestion doses are below the dose limit and constraint set for members of the public. The method may be subject to future amendments to take account of changes in government policy and the outcome of a recent Consultative Exercise on Dose Assessments carried out by FSA. Uncertainties inherent in dose assessments are discussed and quantified wherever possible

Regulating specific organic substances and heavy metals in industrial wastewater discharged to municipal wastewater treatment plants

DEFF Research Database (Denmark)

Grüttner, Henrik; Munk, L.; Pedersen, F.

1994-01-01

Due to the extension of wastewater treatment plants to nutrient removal and the development towards reuse of sludge m agriculture, new guidelines for regulating industrial discharges m Denmark were needed. The paper describes how a concept for regulating the discharge of specific organic substances...... substances, present knowledge of fate and effects in biological treatment plants is too scarce to underpin the setting of general standards. Therefore, it has been decided to base the developed priority system on the data used in the EEC-system for classification of hazardous chemicals. This includes ready...... degradability, defined by the OECD-test, bio-sorption and bio-accumulation, defined by the octanol/water distribution coefficient and toxic effects on water organisms. Several potential effects of seven heavy metals have been evaluated, and the most critical effects were found to be the quality criteria...

A novel approach for soil contamination assessment from heavy metal pollution: a linkage between discharge and adsorption.

Science.gov (United States)

Dong, Xiaoqing; Li, Chaolin; Li, Ji; Wang, Jiaxin; Liu, Suting; Ye, Bin

2010-03-15

Soil protection from heavy metal contamination requires scientific assessment on the linkage between site-specific pollutant discharge and environmental effects. However, this kind of linkage is usually disregarded due to the lack of assessment tools in environmental policies, e.g., some developed coastal cities in China have forced their highly polluting industries out to less developed interior areas without consideration of the impacts from pollution transfer. This paper developed a soil adsorption fraction (SAF) model to characterize the emissions-to-adsorption relationship between heavy metal emission and the adsorption by soil. Case studies were carried out for two adjacent southern cities in China, i.e., Guangzhou and Shaoguan. The results indicated that the average SAF of cadmium was 5.38 x 10(-3) for Shaoguan and 1.28 x 10(-3) for Guangzhou, i.e., cadmium released from Shaoguan threatened the soil environment 4.2 times of that from Guangzhou. Further analysis showed the polluting pathway and abundance of water resources were the main influencing factors on SAF. Soil contamination will be exaggerated by relocating heavy metal polluting industries from coastal areas to interior areas. The results should be useful to prompt site-specific policies on heavy metal pollution control. (c) 2009 Elsevier B.V. All rights reserved.

A novel approach for soil contamination assessment from heavy metal pollution: A linkage between discharge and adsorption

International Nuclear Information System (INIS)

Dong Xiaoqing; Li Chaolin; Li Ji; Wang Jiaxin; Liu Suting; Ye Bin

2010-01-01

Soil protection from heavy metal contamination requires scientific assessment on the linkage between site-specific pollutant discharge and environmental effects. However, this kind of linkage is usually disregarded due to the lack of assessment tools in environmental policies, e.g., some developed coastal cities in China have forced their highly polluting industries out to less developed interior areas without consideration of the impacts from pollution transfer. This paper developed a soil adsorption fraction (SAF) model to characterize the emissions-to-adsorption relationship between heavy metal emission and the adsorption by soil. Case studies were carried out for two adjacent southern cities in China, i.e., Guangzhou and Shaoguan. The results indicated that the average SAF of cadmium was 5.38 x 10 -3 for Shaoguan and 1.28 x 10 -3 for Guangzhou, i.e., cadmium released from Shaoguan threatened the soil environment 4.2 times of that from Guangzhou. Further analysis showed the polluting pathway and abundance of water resources were the main influencing factors on SAF. Soil contamination will be exaggerated by relocating heavy metal polluting industries from coastal areas to interior areas. The results should be useful to prompt site-specific policies on heavy metal pollution control.

Estimated discharge of treated wastewater in Florida, 1990

Science.gov (United States)

Marella, R.L.

1994-01-01

According to the Florida Department of Environ- mental Protection, 5,100 wastewater treatment systems were in operation during 1990. Of this total, 72 percent were domestic wastewater facilities and 28 percent were industrial waste- water facilities. The number of wastewater systems inventoried for 1990 was 1,062 (systems that treated and discharged more than 0.01 Mgal/d or had a plant capacity of greater than 0.04 Mgal/d. Based on this inventory, the estimated discharge of treated wastewater in Florida during 1990 totaled 1,638 million gallons per day. Approxi- mately 65 percent of this water was discharged to surface water during 1990 and the remaining 35 percent was discharged to ground water. Discharge to surface water includes effluent outfalls into the Atlantic Ocean (32 percent), while the re- maining (68 percent) is discharged into the Gulf of Mexico, bays, rivers, wetlands, and other surface water bodies throughout Florida. Discharge to ground-water includes treated effluent outfalls to land application systems (reuse systems and spray fields), drain fields, percolation ponds (51 percent), and to injection wells (49 percent). An estimated 322 million gallons per day of the treated domestic and industrial wastewater was reused during 1990. Discharge of treated domestic wastewater from the 994 systems inventoried in Florida during 1990 totaled 1,353 million gallons per day and served an estimated 8.58 million people (66 percent of the population of Florida in 1990). The remaining 34 percent of the popu- lation (4.36 million) are served by the 2,700 smaller domestic wastewater systems or have individual septic tanks. In 1990, there were 1.56 million septic tanks in Florida. Discharge of industrial wastewater was inventoried for 68 systems in 1990 and totaled 285 million gallons per day. Discharge of domestic wastewater in- creased more than 20 percent and industrial wastewater discharge increased 5 percent from 1985 to 1990. (USGS)

Osmosis process for leachate treatment in industrial platform: Economic and performances evaluations to zero liquid discharge.

Science.gov (United States)

Cingolani, Diego; Eusebi, Anna Laura; Battistoni, Paolo

2017-12-01

The industrial processes require large quantities of water. The presence of discharges results not only in significant environmental impact but implies wastage of water resources. This problem could be solved treating and reusing the produced wastewaters and applying the new zero liquid discharge approach. This paper discusses the design and the performances of reverse osmosis membranes for the upgrading of full scale platform for industrial liquid wastes. The final effluent from the ultrafiltration unit of the full scale plant was monitored to design the reverse osmosis unit. Previous modelling phase was used to evaluate the specific ordinary and maintenance costs and the final effluent quality (2.7 €/m 3 ). The system was designed in triple stages at different operative pressures. The economic feasibility and the payback period of the technology at different percentages of produced permeate were determined. The recovery of 90% was identified as profitable for the reverse osmosis application. One experimental pilot plant applying the reverse osmosis was used to test the final effluent. Moreover, the same flow was treated with second pilot system based on the forward osmosis process. The final efficiencies were compared. Removals higher than 95% using the reverse system were obtained for the main macropollutants and ions. No sustainable applicability of the forward osmosis was determined. Copyright © 2016 Elsevier Ltd. All rights reserved.

1995 mask industry quality assessment

Science.gov (United States)

Bishop, Chris; Strott, Al

1995-12-01

The third annual mask industry assessment will again survey various industry companies for key performance measurements in the areas of quality and delivery. This year's assessment is enhanced to include the area of safety and further breakdown of the data into 5-inch vs. 6- inch. The data compiled includes shipments, customer return rate, customer return reason, performance to schedule, plate survival yield, and throughput time (TPT) from 1988 through Q2, 1995. Contributor identities remain protected by utilizing Arthur Andersen & Company to ensure participant confidentiality. Participation in the past included representation of over 75% of the total merchant and captive mask volume in the United States. This year's assessment is expected to result in expanded participation by again inviting all mask suppliers domestically to participate as well as an impact from inviting international suppliers to participate.

Problems with textile wastewater discharge

International Nuclear Information System (INIS)

Rantala, Pentti

1987-01-01

The general character of textile industry wastewaters is briefly discussed. General guidelines and practice in Finland when discharging textile industry wastewaters to municipal sewer systems is described. A survey revealed that most municipalities experience some problems due to textile industry wastewaters. Pretreatment is not always practiced and in some cases pretreatment is not operated efficiently. (author)

Investment threshold and management reflection for industrial system cleaning: a case for China.

Science.gov (United States)

Fang, Yiping

2012-03-01

The recognition that industrial activity plays an essential role in a sustainable society is now widespread. To understand the causal relationship between industrial pollution abatement expenditure and industrial system cleaning level in China is of considerable importance, especially under extremely rapid industrial growth and serious pressure of industrial pollutants abatement context. We use composite index assessment method and regression analysis in this paper. We establish the mathematical model between composite industrial cleaner index and investment intensity for industrial pollutants abatement, and analyze the effects of industrial pollutants treatment and discharge indicators on composite industrial cleaner index in China. Results show that: (1) There is significant nonlinear relationship between composite industrial cleaner index and investment intensity for industrial pollutants abatement. (2) From single indicator perspective, the effect of investment intensity on pollutants treatment indicators is positively, on the contrary, the effect of investment intensity on pollutants discharge indicators is negatively; (3) From decomposition cleaner index perspective, the effect of pollutants discharge level (process control) is higher than pollutants treatment capacity (end-of-pipe) on composite industrial cleaner index; (4) There is threshold between investment intensity and composite cleaner industrial index, it is a crucial reference scale for industrial environmental management in selected period.

A New Servo Control Drive for Electro Discharge Texturing System Industrial Applications Using Ultrasonic Technology

Directory of Open Access Journals (Sweden)

M. Shafik

2013-07-01

Full Text Available This paper presents a new ultrasonic servo control drive for electro discharge texturing system industrial applications. The new drive is aiming to overcome the current teething issues of the existing electro discharge texturing system, servo control drive level of precision, processing stability, dynamic response and surface profile of the machined products. The new ultrasonic servo control drive consists of three main apparatuses, an ultrasonic motor, electronic driver and control unit. The ultrasonic motor consists of three main parts, the stator, rotor and sliding element. The motor design process, basic configuration, principles of motion, finite element analysis and experimental examination of the main characteristics is discussed in this paper. The electronic driver of the motor consists of two main stages which are the booster and piezoelectric amplifier. The experimental test and validation of the developed servo control drive in electro discharge texturing platform is also discussed and presented in this paper. The initial results showed that the ultrasonic servo control drive is able to provide: a bidirectional of motion, a resolution of <50μm and a dynamic response of <10msec. The electron microscopic micro examination into the textured samples showed that: a clear improvement in machining stability, products surface profile, a notable reduction in the processing time, arcing and short-circuiting teething phenomena.

Zero discharge performance of an industrial pilot-scale plant treating palm oil mill effluent.

Science.gov (United States)

Wang, Jin; Mahmood, Qaisar; Qiu, Jiang-Ping; Li, Yin-Sheng; Chang, Yoon-Seong; Chi, Li-Na; Li, Xu-Dong

2015-01-01

Palm oil is one of the most important agroindustries in Malaysia. Huge quantities of palm oil mill effluent (POME) pose a great threat to aqueous environment due to its very high COD. To make full use of discharged wastes, the integrated "zero discharge" pilot-scale industrial plant comprising "pretreatment-anaerobic and aerobic process-membrane separation" was continuously operated for 1 year. After pretreatment in the oil separator tank, 55.6% of waste oil in raw POME could be recovered and sold and anaerobically digested through 2 AnaEG reactors followed by a dissolved air flotation (DAF); average COD reduced to about 3587 mg/L, and biogas production was 27.65 times POME injection which was used to generate electricity. The aerobic effluent was settled for 3 h or/and treated in MBR which could remove BOD3 (30°C) to less than 20 mg/L as required by Department of Environment of Malaysia. After filtration by UF and RO membrane, all organic compounds and most of the salts were removed; RO permeate could be reused as the boiler feed water. RO concentrate combined with anaerobic surplus sludge could be used as biofertilizer.

Assessing submarine groundwater discharge (SGD) and nitrate fluxes in highly heterogeneous coastal karst aquifers: Challenges and solutions

Science.gov (United States)

Montiel, Daniel; Dimova, Natasha; Andreo, Bartolomé; Prieto, Jorge; García-Orellana, Jordi; Rodellas, Valentí

2018-02-01

Groundwater discharge in coastal karst aquifers worldwide represents a substantial part of the water budget and is a main pathway for nutrient transport to the sea. Groundwater discharge to the sea manifests under different forms, making its assessment very challenging particularly in highly heterogeneous coastal systems karst systems. In this study, we present a methodology approach to identify and quantify four forms of groundwater discharge in a mixed lithology system in southern Spain (Maro-Cerro Gordo) that includes an ecologically protected coastal area comprised of karstic marble. We found that groundwater discharge to the sea occurs via: (1) groundwater-fed creeks, (2) coastal springs, (3) diffuse groundwater seepage through seabed sediments, and (4) submarine springs. We used a multi-method approach combining tracer techniques (salinity, 224Ra, and 222Rn) and direct measurements (seepage meters and flowmeters) to evaluate the discharge. Groundwater discharge via submarine springs was the most difficult to assess due to their depth (up to 15 m) and extensive development of the springs conduits. We determined that the total groundwater discharge over the 16 km of shoreline of the study area was at least 11 ± 3 × 103 m3 d-1 for the four types of discharge assessed. Groundwater-derived nitrate (NO3-) fluxes to coastal waters over ∼3 km (or 20%) in a highly populated and farmed section of Maro-Cerro Gordo was 641 ± 166 mol d-1, or ∼75% of the total NO3- loading in the study area. We demonstrate in this study that a multi-method approach must be applied to assess all forms of SGD and derived nutrient fluxes to the sea in highly heterogeneous karst aquifer systems.

III: Use of biomarkers as Risk Indicators in Environmental Risk Assessment of oil based discharges offshore.

Science.gov (United States)

Sanni, Steinar; Lyng, Emily; Pampanin, Daniela M

2017-06-01

Offshore oil and gas activities are required not to cause adverse environmental effects, and risk based management has been established to meet environmental standards. In some risk assessment schemes, Risk Indicators (RIs) are parameters to monitor the development of risk affecting factors. RIs have not yet been established in the Environmental Risk Assessment procedures for management of oil based discharges offshore. This paper evaluates the usefulness of biomarkers as RIs, based on their properties, existing laboratory biomarker data and assessment methods. Data shows several correlations between oil concentrations and biomarker responses, and assessment principles exist that qualify biomarkers for integration into risk procedures. Different ways that these existing biomarkers and methods can be applied as RIs in a probabilistic risk assessment system when linked with whole organism responses are discussed. This can be a useful approach to integrate biomarkers into probabilistic risk assessment related to oil based discharges, representing a potential supplement to information that biomarkers already provide about environmental impact and risk related to these kind of discharges. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessment of readability, understandability, and completeness of pediatric hospital medicine discharge instructions.

Science.gov (United States)

Unaka, Ndidi I; Statile, Angela; Haney, Julianne; Beck, Andrew F; Brady, Patrick W; Jerardi, Karen E

2017-02-01

The average American adult reads at an 8th-grade level. Discharge instructions written above this level might increase the risk of adverse outcomes for children as they transition from hospital to home. We conducted a cross-sectional study at a large urban academic children's hospital to describe readability levels, understandability scores, and completeness of written instructions given to families at hospital discharge. Two hundred charts for patients discharged from the hospital medicine service were randomly selected for review. Written discharge instructions were extracted and scored for readability (Fry Readability Scale [FRS]), understandability (Patient Education Materials Assessment Tool [PEMAT]), and completeness (5 criteria determined by consensus). Descriptive statistics enumerated the distribution of readability, understandability, and completeness of written discharge instructions. Of the patients included in the study, 51% were publicly insured. Median age was 3.1 years, and median length of stay was 2.0 days. The median readability score corresponded to a 10th-grade reading level (interquartile range, 8-12; range, 1-13). Median PEMAT score was 73% (interquartile range, 64%-82%; range, 45%-100%); 36% of instructions scored below 70%, correlating with suboptimal understandability. The diagnosis was described in only 33% of the instructions. Although explicit warning signs were listed in most instructions, 38% of the instructions did not include information on the person to contact if warning signs developed. Overall, the readability, understandability, and completeness of discharge instructions were subpar. Efforts to improve the content of discharge instructions may promote safe and effective transitions home. Journal of Hospital Medicine 2017;12:98-101. © 2017 Society of Hospital Medicine.

Efficacy of Allium cepa test system for screening cytotoxicity and genotoxicity of industrial effluents originated from different industrial activities.

Science.gov (United States)

Pathiratne, Asoka; Hemachandra, Chamini K; De Silva, Nimal

2015-12-01

Efficacy of Allium cepa test system for screening cytotoxicity and genotoxicity of treated effluents originated from four types of industrial activities (two textile industries, three rubber based industries, two common treatment plants of industrial zones, and two water treatment plants) was assessed. Physico-chemical parameters including the heavy metal/metalloid levels of the effluents varied depending on the industry profile, but most of the measured parameters in the effluents were within the specified tolerance limits of Sri Lankan environmental regulations for discharge of industrial effluents into inland surface waters. In the A. cepa test system, the undiluted effluents induced statistically significant root growth retardation, mitosis depression, and chromosomal aberrations in root meristematic cells in most cases in comparison to the dilution water and upstream water signifying effluent induced cytotoxicity and genotoxicity. Ethyl methane sulphonate (a mutagen, positive control) and all the effluents under 1:8 dilution significantly induced total chromosomal aberrations in root meristematic cells in comparison to the dilution water and upstream water indicating inadequacy of expected 1:8 dilutions in the receiving waters for curtailing genotoxic impacts. The results support the use of a practically feasible A. cepa test system for rapid screening of cytotoxicity and genotoxicity of diverse industrial effluents discharging into inland surface waters.

Needs Assessment of Hospitality/Tourism Industry in Kentucky.

Science.gov (United States)

Gibbs, Shirley

This report of an assessment of the hospitality/tourism industry in Kentucky begins with a history/description of the hospitality/tourism industry written from research; the hospitality/tourism training programs conducted by various institutions in the state are also described. For the assessment itself, two survey instruments were prepared and…

An assessment of whole effluent toxicity testing as a means of regulating waters produced by the oil and gas industry

International Nuclear Information System (INIS)

Hill, S.L.; Bergman, H.L.

1993-01-01

Approximately 500 million barrels of produced water are discharged to Wyoming's surface waters by the oil and gas industry. This discharges are of two types: direct and indirect. The direct discharges have been issued NPDES permits requiring whole effluent toxicity testing. Toxicity testing requirements have not been incorporated into permits written for indirect discharges because of the applicability of toxicity testing for regulating these waters has not been determined. Preliminary testing has shown that most produced waters are toxic at the point of discharge because of high concentrations of hydrogen sulfide, but that the toxicity of an indirect discharge is often lost before it reaches a receiving stream. Thus, whole effluent toxicity testing of an indirect discharge may be overly stringent, resulting in treatment or reinjection of the water or closure of the well. Any of these options would have severe economic consequences for oil producers and the state's agricultural industry. The purpose of this study was to determine whether whole effluent toxicity testing actually predicts the in-stream effects of indirect discharges on water quality and benthic invertebrate populations. The authors will report the results of short-term ambient toxicity tests and in-stream bioassessments performed upstream and downstream of six indirect discharges located in four drainages in Wyoming

Potential of electrical gas discharges for pollution control of large gas volumes

International Nuclear Information System (INIS)

Kogelschatz, U.

1997-01-01

Non-equilibrium gas discharges in many cases offer an innovative approach to the solution cf industrial air pollution problems. Negative corona discharges are used in electrostatic precipitators to collect dust and fly ash particles. Pulsed positive streamer coronas, dielectric-barrier discharges and possibly also flow-stabilised high pressure glow discharges are emerging technologies for the destruction of air pollutants like nitrogen oxides and sulfur dioxide in flue gases and volatile organic compounds (VOCs) in industrial effluents. The different discharge types are discussed with special emphasis on their potential for upscaling. Major applications are expected particularly in the removal of dilute concentrations of air pollutants, in odour control and in the simultaneous removal of different pollutants. Dielectric-barrier discharges exhibit disposal efficiencies similar to those of pulsed positive streamer coronas and require less sophisticated feeding circuits in large-scale industrial applications. (author)

Assessment of industrial liquid waste management in Omdurman Industrial Area

International Nuclear Information System (INIS)

Elnasri, R. A. A.

2003-04-01

This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

Assessment of industrial liquid waste management in Omdurman Industrial Area

Energy Technology Data Exchange (ETDEWEB)

Elnasri, R A. A. [Institute of Environmental Studies, University of Khartoum, Khartoum (Sudan)

2003-04-15

This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

EIF onshore discharges : a quantitative environmental risk assessment tool for onshore facilities

Energy Technology Data Exchange (ETDEWEB)

Hagemann, R.; Smit, M.G.D.; Frost, T.K. [Statoil ASA, Stavenger (Norway); Firth, S.K. [Firth Consultants, Bristol (United Kingdom); Stone, K. [WorleyParsons, Victoria, BC (Canada)

2009-07-01

The proper management of environmental risk is a key requirement of StatoilHydro's governing documents and is a key consideration in all phases of StatoilHydro's activities. In order to help manage risks in an effective and sustainable manner, StatoilHydro has led the development of the environmental impact factor (EIF) risk assessment tool. The EIF is utilized by all operators on the Norwegian Continental Shelf for reporting continuous improvements in produced water management to the authorities. The EIF concept has also been applied to evaluate environmental risk from air emissions, offshore oil spills and drilling discharges, discharges from onshore facilities to sea and discharges and spills from onshore installations. In order to identify the remaining hypothetical risk from a new facility, optimized with respect to environmental protection, this paper presented a case study, where the tool was applied to an oil sands steam assisted gravity drainage facility in Alberta. The paper discussed the EIF model and results of the case study. It was concluded that as a result of the use of generic principles for environmental risk assessment, combined with databases with parameter information for common soil and aquifer types, the EIF tool could be applied to any site ranging from wetlands to deserts. 5 refs., 2 tabs., 3 figs.

Assessing medication adherence and healthcare utilization and cost patterns among hospital-discharged patients with schizoaffective disorder.

Science.gov (United States)

Karve, Sudeep; Markowitz, Michael; Fu, Dong-Jing; Lindenmayer, Jean-Pierre; Wang, Chi-Chuan; Candrilli, Sean D; Alphs, Larry

2014-06-01

Hospital-discharged patients with schizoaffective disorder have a high risk of re-hospitalization. However, limited data exist evaluating critical post-discharge periods during which the risk of re-hospitalization is significant. Among hospital-discharged patients with schizoaffective disorder, we assessed pharmacotherapy adherence and healthcare utilization and costs during sequential 60-day clinical periods before schizoaffective disorder-related hospitalization and post-hospital discharge. From the MarketScan(®) Medicaid database (2004-2008), we identified patients (≥18 years) with a schizoaffective disorder-related inpatient admission. Study measures including medication adherence and healthcare utilization and costs were assessed during sequential preadmission and post-discharge periods. We conducted univariate and multivariable regression analyses to compare schizoaffective disorder-related and all-cause healthcare utilization and costs (in 2010 US dollars) between each adjacent 60-day post-discharge periods. No adjustment was made for multiplicity. We identified 1,193 hospital-discharged patients with a mean age of 41 years. The mean medication adherence rate was 46% during the 60-day period prior to index inpatient admission, which improved to 80% during the 60-day post-discharge period. Following hospital discharge, schizoaffective disorder-related healthcare costs were significantly greater during the initial 60-day period compared with the 61- to 120-day post-discharge period (mean US$2,370 vs US$1,765; p schizoaffective disorder-related costs declined during the 61- to 120-day post-discharge period and remained stable for the remaining post-discharge periods (days 121-365). We observed considerably lower (46%) adherence during 60 days prior to the inpatient admission; in comparison, adherence for the overall 6-month period was 8% (54%) higher. Our study findings suggest that both short-term (e.g., 60 days) and long-term (e.g., 6-12 months) medication

Domestic uranium mining and milling industry: 1986 viability assessment

International Nuclear Information System (INIS)

1987-01-01

This report presents the fourth annual assessment of the domestic uranium mining and milling industry's resource capability, supply response capability, financial capability, and import commitment dependency. The data and analysis in support of this assessment and the report itself have been developed pursuant to Public Law 97-415, the Nuclear Regulatory Commission (NRC) Authorization Act of 1982. The report provides information on recent uranium supply, demand, and marketing conditions, as well as projections of the domestic uranium industry's ability to continue to supply the needs of the domestic nuclear power industry through the year 2000. Industry capability is assessed under a variety of assumed conditions with respect to hypothetical disruptions of uranium imports. 13 refs., 26 figs., 37 tabs

Impact assessment wastewater discharge on water quality DTD canal Bečej-Bogojevo

Directory of Open Access Journals (Sweden)

Pešić Vesna Ž.

2015-01-01

Full Text Available Pressure and impact analysis requires information on the main drivers and changes in conditions. In order to analyze such pressures and impacts, each river basin requires: an analysis of its characteristics, a review of the impact of human activity on the status of the surface water and an economic analysis of water use. Pressure and impact analysis plays a central role in the planning of river basin management. The quality of the stream at any point depends on several major factors: lithology of the basin, weather conditions, climate, and human impacts. Most of the polluters are located in the big cities next to canal DTD Bečej-Bogojevo canal (Odzaci,Vrbas, Srbobran, Becej. Per year, 2900000 m3 of wastewater was discharged into the Bečej-Bogojevo section of the DTD canal: 1,4 tCOD, 0,8 0tBOD, 260 kg of nitrogen, 19 kg of phosphorus and 282 kg of suspended solids. Of the total volume of wastewater, 20% comes from industry and 80% from municipal wastewater. Most of the wastewaters from the studied polluters is discharged untreated or insufficiently treated (only primary treatment. This poor quality wastewater threatens the receipients into which its is discharged. Comparison of the wastewater quality results to the Decree on emission limits and deadlines for their achievement, shows that many polluters exceed the limits for all parameters (COD, BOD, nitrogen, phosphorus, suspended solids. On the basis of the physico-chemical analysis of the water from the DTD Bečej-Bogojevo canal it can be concluded that the water quality is unsatisfactory. According to the national legislation, the water quality exceeds the values for good potential streams for most parameters at all sampling locatio dissolved oxygen, organic matter and nutrients. Thus, we can conclude that the water in the studied section of the DTD Bečej-Bogojevo canal does not meet the criteria for "good ecological potential". The most vulnerable locations are downstream of the Vrbas and

Assessing the industry using Porter's five forces.

Science.gov (United States)

2014-01-01

To develop a business and plan for the future, there is a need to assess the current situation. One way of doing this is to use Porter's five forces framework. This was the brainchild of Harvard Business School's Michael Porter and developed in 1979. Looking at the competitive intensity of an industry, the model assesses internal and external factors that act together to determine the direction of the business; taken together, this gives an indication of the attractiveness of the industry.

Safety assessment of discharge chute isolation barrier preparation and installation

International Nuclear Information System (INIS)

Meichle, R.H.

1994-01-01

This analysis examines activities associated with the installation of isolation barriers in the K Basins at the Hanford Reservation. This revision adds evaluation of barrier drops on stored fuel and basin floor, identifies fuel which will be moved and addresses criticality issues with sludge. The safety assessment is made for the activities for the preparation and installation of the discharge chute isolation barriers. The safety assessment includes a hazard assessment and comparisons of potential accidents/events to those addressed by the current safety basis documentation. No significant hazards were identified. An evaluation against the USQ evaluation questions was made and the determination made that the activities do not represent a USQ. Hazard categorization techniques were used to provide a basis for readiness review classifications

An introduction to gas discharges

CERN Document Server

Howatson, A M

2013-01-01

An Introduction to Gas Discharges: Second Edition aims to provide a compact introduction to the subject of gas discharges, which continues to make both scientific and industrial progress. In this second edition, the author has made minor corrections, rewritten and expanded some sections, used SI units and modernized notions, in hopes of making the book more up to date. Included in the book is a short history of the subject, an introduction that enumerates the types of gas discharges, the fundamental processes, and then moves on to the more specific areas such as the breakdown, the self-sustai

Domestic uranium mining and milling industry. 1984 viability assessment

International Nuclear Information System (INIS)

1985-01-01

This report presents the second annual assessment of the domestic uranium mining and milling industry's resource capability, supply response capability, financial capability, and import commitment dependency. The data and analysis in support of this assessment and the report itself have been developed pursuant to requirements set forth in Section 23(b) of Public Law 97-415, the Nuclear Regulatory Commission (NRC) Authorization Act, which was enacted on January 4, 1983. The report provides information on recent uranium supply, demand, and marketing conditions and projections of the domestic uranium industry's ability to continue to supply the needs of the domestic nuclear power industry through the year 2000. Industry capability is assessed under a variety of assumed conditions with respect to hypothetical disruptions of uranium imports

Impacts and Policy Implications of Metals Effluent Discharge into Rivers within Industrial Zones: A Sub-Saharan Perspective from Ethiopia

Science.gov (United States)

Zinabu, E.; Kelderman, P.; van der Kwast, J.; Irvine, K.

2018-04-01

Kombolcha, a city in Ethiopia, exemplifies the challenges and problems of the sub-Saharan countries where industrialization is growing fast but monitoring resources are poor and information on pollution unknown. This study monitored metals Cr, Cu, Zn, and Pb concentrations in five factories' effluents, and in the effluent mixing zones of two rivers receiving discharges during the rainy seasons of 2013 and 2014. The results indicate that median concentrations of Cr in the tannery effluents and Zn in the steel processing effluents were as high as 26,600 and 155,750 µg/L, respectively, much exceeding both the USEPA and Ethiopian emission guidelines. Cu concentrations were low in all effluents. Pb concentrations were high in the tannery effluent, but did not exceed emission guidelines. As expected, no metal emission guidelines were exceeded for the brewery, textile and meat processing effluents. Median Cr and Zn concentrations in the Leyole river in the effluent mixing zones downstream of the tannery and steel processing plant increased by factors of 52 (2660 compared with 51 µg Cr/L) and 5 (520 compared with 110 µg Zn/L), respectively, compared with stations further upstream. This poses substantial ecological risks downstream. Comparison with emission guidelines indicates poor environmental management by industries and regulating institutions. Despite appropriate legislation, no clear measures have yet been taken to control industrial discharges, with apparent mismatch between environmental enforcement and investment policies. Effluent management, treatment technologies and operational capacity of environmental institutions were identified as key improvement areas to adopt progressive sustainable development.

Filamentary and diffuse barrier discharges

International Nuclear Information System (INIS)

Kogelschatz, U.

2001-01-01

Barrier discharges, sometimes also referred to as dielectric-barrier discharges or silent discharges, are characterized by the presence of at least one insulating layer in contact with the discharge between two planar or cylindrical electrodes connected to an ac power supply. The main advantage of this type of electrical discharge is, that non-equilibrium plasma conditions in atmospheric-pressure gases can be established in an economic and reliable way. This has led to a number of important applications including industrial ozone generation, surface modification of polymers, plasma chemical vapor deposition, excitation of CO 2 lasers, excimer lamps and, most recently, large-area flat plasma display panels. Depending on the application, the width of the discharge gap can range from less than 0.1 mm to about 100 mm and the applied frequency from below line frequency to several gigahertz. Typical materials used for the insulating layer (dielectric barrier) are glass, quartz, ceramics but also thin enamel or polymer layers

Industrial effluent quality, pollution monitoring and environmental management.

Science.gov (United States)

Ahmad, Maqbool; Bajahlan, Ahmad S; Hammad, Waleed S

2008-12-01

Royal Commission Environmental Control Department (RC-ECD) at Yanbu industrial city in Kingdom of Saudi Arabia has established a well-defined monitoring program to control the pollution from industrial effluents. The quality of effluent from each facility is monitored round the clock. Different strategic measures have been taken by the RC-ECD to implement the zero discharge policy of RC. Industries are required to pre-treat the effluent to conform pretreatment standards before discharging to central biological treatment plant. Industries are not allowed to discharge any treated or untreated effluent in open channels. After treatment, reclaimed water must have to comply with direct discharge standards before discharge to the sea. Data of industrial wastewater collected from five major industries and central industrial wastewater treatment plant (IWTP) is summarized in this report. During 5-year period, 3,705 samples were collected and analyzed for 43,436 parameters. There were 1,377 violations from pretreatment standards from all the industries. Overall violation percentage was 3.17%. Maximum violations were recorded from one of the petrochemical plants. The results show no significant pollution due to heavy metals. Almost all heavy metals were within RC pretreatment standards. High COD and TOC indicates that major pollution was due to hydrocarbons. Typical compounds identified by GC-MS were branched alkanes, branched alkenes, aliphatic ketones, substituted thiophenes, substituted phenols, aromatics and aromatic alcohols. Quality of treated water was also in compliance with RC direct discharge standards. In order to achieve the zero discharge goal, further studies and measures are in progress.

Assessment of risk of potential exposures on facilities industries

International Nuclear Information System (INIS)

Leocadio, Joao Carlos

2007-03-01

This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10 -2 per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

Does the Risk Assessment and Prediction Tool Predict Discharge Disposition After Joint Replacement?

DEFF Research Database (Denmark)

Hansen, Viktor J.; Gromov, Kirill; Lebrun, Lauren M

2015-01-01

BACKGROUND: Payers of health services and policymakers place a major focus on cost containment in health care. Studies have shown that early planning of discharge is essential in reducing length of stay and achieving financial benefit; tools that can help predict discharge disposition would...... populations is unknown. A low RAPT score is reported to indicate a high risk of needing any form of inpatient rehabilitation after TJA, including short-term nursing facilities. QUESTIONS/PURPOSES: This study attempts (1) to assess predictive accuracy of the RAPT on US patients undergoing total hip and knee....... Based on our findings, the risk categories in our populations should be high risk intermediate risk 7 to 10, and low risk > 10. CONCLUSIONS: The RAPT accurately predicted discharge disposition for high- and low-risk patients in our cohort. Based on our data, intermediate-risk patients should...

Competitive assessment of the US: Renewable energy equipment industry

Energy Technology Data Exchange (ETDEWEB)

1984-12-01

This report is a competitive assessment of the U.S. renewable energy equipment industry. The contents include: Definition of technologies; Industry characteristics; Historical perspectives; Industry performance; Trends and projections; The world marketplace; and Issues and options.

Instream biological assessment of NPDES point source discharges at the Savannah River Site, 1997-1998

International Nuclear Information System (INIS)

Specht, W.L.

2000-01-01

The Savannah River Site currently has 33 permitted NPDES outfalls that have been permitted by the South Carolina Department of Health an Environmental Control to discharge to SRS streams and the Savannah River. In order to determine the cumulative impacts of these discharges to the receiving streams, a study plan was developed to perform in-stream assessments of the fish assemblages, macroinvertebrate assemblages, and habitats of the receiving streams

Instream biological assessment of NPDES point source discharges at the Savannah River Site, 1997-1998

Energy Technology Data Exchange (ETDEWEB)

Specht, W.L.

2000-02-28

The Savannah River Site currently has 33 permitted NPDES outfalls that have been permitted by the South Carolina Department of Health an Environmental Control to discharge to SRS streams and the Savannah River. In order to determine the cumulative impacts of these discharges to the receiving streams, a study plan was developed to perform in-stream assessments of the fish assemblages, macroinvertebrate assemblages, and habitats of the receiving streams.

Dose related risk and effect assessment model (DREAM) -- A more realistic approach to risk assessment of offshore discharges

International Nuclear Information System (INIS)

Johnsen, S.; Furuholt, E.

1995-01-01

Risk assessment of discharges from offshore oil and gas production to the marine environment features determination of potential environmental concentration (PEC) levels and no observed effect concentration (NOEC) levels. The PEC values are normally based on dilution of chemical components in the actual discharge source in the recipient, while the NOEC values are determined by applying a safety factor to acute toxic effects from laboratory tests. The DREAM concept focuses on realistic exposure doses as function of contact time and dilution, rather than fixed exposure concentrations of chemicals in long time exposure regimes. In its present state, the DREAM model is based on a number of assumptions with respect to the link between real life exposure doses and effects observed in laboratory tests. A research project has recently been initiated to develop the concept further, with special focus on chronic effects of different chemical compounds on the marine ecosystem. One of the questions that will be addressed is the link between exposure time, dose, concentration and effect. Validation of the safety factors applied for transforming acute toxic data into NOEC values will also be included. The DREAM model has been used by Statoil for risk assessment of discharges from new and existing offshore oil and gas production fields, and has been found to give a much more realistic results than conventional risk assessment tools. The presentation outlines the background for the DREAM approach, describes the model in its present state, discusses further developments and applications, and shows a number of examples on the performance of DREAM

Airborne trace elements near a petrochemical industrial complex in Thailand assessed by the lichen Parmotrema tinctorum (Despr. ex Nyl.) Hale.

Science.gov (United States)

Boonpeng, Chaiwat; Polyiam, Wetchasart; Sriviboon, Chutima; Sangiamdee, Duangkamon; Watthana, Santi; Nimis, Pier Luigi; Boonpragob, Kansri

2017-05-01

Several trace elements discharged by the petrochemical industry are toxic to humans and the ecosystem. In this study, we assessed airborne trace elements in the vicinity of the Map Ta Phut petrochemical industrial complex in Thailand by transplanting the lichen Parmotrema tinctorum to eight industrial, two rural, and one clean air sites between October 2013 and June 2014. After 242 days, the concentrations of As, Cd, Co, Cr, Cu, Hg, Mo, Ni, Pb, Sb, Ti, V, and Zn in lichens at most industrial sites were higher than those at the rural and the control sites; in particular, As, Cu, Mo, Sb, V, and Zn were significantly higher than at the control site (p industrial sites. Principal component analysis (PCA) showed that most elements were associated with industry, with lesser contributions from traffic and agriculture. Based on the pollution load indexes (PLIs), two industrial sites were highly polluted, five were moderately polluted, and one had a low pollution level, whereas the pollution load at the rural sites was comparable to background levels. This study reinforces the utility of lichens as cost-effective biomonitors of airborne elements, suitable for use in developing countries, where adequate numbers of air monitoring instruments are unavailable due to financial, technical, and policy constraints.

A paradigm study for assessment of phenylalanine's damage under arc-discharge irradiation

Energy Technology Data Exchange (ETDEWEB)

Ke Zhigang [Laboratory of Ion Beam Bio-engineering, Institute of Plasma Physics of Chinese Academy of Sciences, P.O. Box 1126, Shushanhu Road 350, Hefei 230031 (China); Huang Qing, E-mail: huangq@ipp.ac.c [Laboratory of Ion Beam Bio-engineering, Institute of Plasma Physics of Chinese Academy of Sciences, P.O. Box 1126, Shushanhu Road 350, Hefei 230031 (China); Su Xi; Jiang Jiang; Wang Xiangqin; Yu Zengliang [Laboratory of Ion Beam Bio-engineering, Institute of Plasma Physics of Chinese Academy of Sciences, P.O. Box 1126, Shushanhu Road 350, Hefei 230031 (China)

2010-05-15

Energetic ions induce important biological effects and the research into radiolysis of amino acids can help to clarify radiolysis of proteins. For this purpose, arc-discharge induced radiolysis of the benzyl-containing aromatic amino acid phenylalanine in aqueous solution was studied and the damage was assessed quantitatively. The energetic ions were produced by arc-discharge in nitrogen and argon atmosphere. The arc-discharge induced chemical reactions of the biomolecule in aqueous solution were detected and analyzed by means of UV-Vis absorption, fluorescence, Fourier transformation infrared (FTIR) spectroscopy and high performance liquid chromatography (HPLC). Based on the multiple spectroscopic approach, the damage can be evaluated in a more reliable and convenient way. The fluorescence analysis in this case appears to be a more direct indicator for the assessment of damage, where it reveals that the damage increases with the irradiation time exponentially. On the contrary, the 'plateau region' or 'saddle-shape' apparently shown both in our rough absorption analysis and ninhydrin reaction test, similar to the previously reported feature of the dose effect for low-energy-ion induced damage, may be just a consequence with varied reactions and processes involved at different stages. This work thus demonstrated that application of appropriate combination of spectroscopic tools can effectively dissect the diversity of the radiolysis reaction system and assess the biomolecular damage properly.

Assessment of heavy metals in the industrial effluents, tube-wells and municipal supplied water of Dehradun, India.

Science.gov (United States)

Kulshrestha, Shail; Awasthi, Alok; Dabral, S K

2013-07-01

The bio-geochemical cycles of metals involve the lands, rivers, oceans and the atmosphere. Although a large number of metals are introduced to the water bodies during their mining and extraction processes and geochemical weathering of rocks, but the role of domestic and industrial wastes is predominant and of much concern. Increased industrial activities has increased the incidence of percolation of toxic metal ions to the soil and water bodies and presently their presence in ecosystem, have reached to an alarming level that environmentalists are finding it difficult to enforce control measures. Human activities and large number of small and big industrial units are increasingly discharging deleterious metals present in the effluents and wastes, to the environment and aquatic systems and have contaminated heavily even the ground water. The toxic metals have a great tendency of bioaccumulation through which they enter the food chain system and ultimately affect adversely the life on this planet Earth in various ways. Further, due to contamination of irrigation system by the harmful Chemicals and toxic metals, the farm products, vegetables, fruits, potable water and even milk is not spared. This paper describes the assessment of the heavy metal concentration in various industrial effluents of the surrounding area. Various physico-chemical characteristics of the effluents collected from various sites are also reported. To assess the status of ground water quality, water samples from four tube wells of different localities of the area and four drinking water samples supplied by Municipal Distribution System were also analyzed.

Environmental characterization to assess potential impacts of thermal discharge to the Columbia River

International Nuclear Information System (INIS)

Neitzel, D.A.; Dauble, D.D.; Page, T.L.; Greager, E.M.

1990-01-01

Laboratory and field studies were conducted to assess the potential impact of the N-Reactor thermal plume on fish from the Hanford Reach of the Columbia River. Discharge water temperatures were measured over a range of river flows and reactor operating conditions. Data were mathematically modeled to define spatial and thermal characteristics of the plume. Four species of Columbia River fish were exposed to thermal conditions expected in the plume. Exposed fish were subjected to predators and disease organisms to test for secondary effects from thermal stress. Spatial and temporal distribution of anadromous fish in the river near N-Reactor were also evaluated to define location relative to the plume. Potential thermal exposures were insufficient to kill or injure fish during operation of N-Reactor. These studies demonstrate that characterization of hydrological conditions and thermal tolerance can adequately assess potential impacts of a thermal discharge to fish

Discharge, water quality, and native fish abundance in the Virgin River, Utah, Nevada, and Arizona, in support of Pah Tempe Springs discharge remediation efforts

Science.gov (United States)

Miller, Matthew P.; Lambert, Patrick M.; Hardy, Thomas B.

2014-01-01

Pah Tempe Springs discharge hot, saline, low dissolved-oxygen water to the Virgin River in southwestern Utah, which is transported downstream to Lake Mead and the Colorado River. The dissolved salts in the Virgin River negatively influence the suitability of this water for downstream agricultural, municipal, and industrial use. Therefore, various remediation scenarios to remove the salt load discharged from Pah Tempe Springs to the Virgin River are being considered. One concern about this load removal is the potential to impact the ecology of the Virgin River. Specifically, information is needed regarding possible impacts of Pah Tempe Springs remediation scenarios on the abundance, distribution, and survival of native fish in the Virgin River. Future efforts that aim to quantitatively assess how various remediation scenarios to reduce the load of dissolved salts from Pah Tempe Springs into the Virgin River may influence the abundance, distribution, and survival of native fish will require data on discharge, water quality, and native fish abundance. This report contains organized accessible discharge, water quality, and native fish abundance data sets from the Virgin River, documents the compilation of these data, and discusses approaches for quantifying relations between abiotic physical and chemical conditions, and fish abundance.

New storm water regulations impact industry

International Nuclear Information System (INIS)

Gemar, C.

1991-01-01

In November 1990, new Environmental Protection Agency (EPA) regulations aimed at governing the discharge of storm water from industrial facilities became effective. Because some industrial runoff contains toxics and other pollutants, the EPA considers storm water a major source of water contamination. The new regulations will have a profound impact on the National Pollutant Discharge Elimination System (NPDES) permit requirements for industry. This paper summarizes the new storm water regulations, focusing on the requirements for industrial facilities. It also presents suggestions for compliance

Assessing Water Risks in the Mining Industry using Life Cycle Assessment Based Approaches

OpenAIRE

STEPHEN ALAN NORTHEY

2018-01-01

Recent advances life cycle assessment methodology provide an opportunity to gain a more holistic understanding of how the mining industry interacts with water resources. A detailed review of assessment methodology and water management in the mining industry was undertaken to identify research needs. Global datasets of water use statistics for mining operations were also developed, and an exhaustive analysis of how global mineral resources and production are spatially distributed across local ...

Estimation of radiation exposure associated with inert gas radionuclides discharged to the environment by the nuclear power industry

International Nuclear Information System (INIS)

Bryant, P.M.; Jones, J.A.

1973-05-01

Several fission product isotopes of krypton and xenon are formed during operation of nuclear power stations, while other radioactive inert gases, notably isotopes of argon and nitrogen, are produced as neutron activation products. With the exception of 85 Kr these radionuclides are short-lived, and the containment and hold-up arrangements in different reactor systems influence the composition of the inert gas mixtures discharged to the environment. Cooling of irradiated fuel before chemical reprocessing reduces very substantially the amounts of the short-lived krypton and xenon isotopes available for discharge at reprocessing plants, but almost all the 85 Kr formed in the fuel is currently discharged to atmosphere from these plants. Estimates are made of the radiation exposure of the public associated with these discharges to atmosphere taking into account the type of radiation emitted, radioactive half-life and the local, regional and world-wide populations concerned. Such estimates are often based on simple models in which activity is assumed to be distributed in a semi-infinite cloud. The model used in this assessment takes into account the finite cloud near the point of its discharge and its behaviour when dispersion in the atmosphere is affected by the presence of buildings. This is particularly important in the case of discharges from those reactors which do not have high stacks. The model also provides in detail for the continued world-wide circulation of the longer-lived 85 Kr. (author)

Environmental risk assessment of cobalt and manganese from industrial sources in an estuarine system.

Science.gov (United States)

Barrio-Parra, F; Elío, J; De Miguel, E; García-González, J E; Izquierdo, M; Álvarez, R

2018-04-01

A total of 74 samples of soil, sediment, industrial sludge, and surface water were collected in a Mediterranean estuarine system in order to assess the potential ecological impact of elevated concentrations of Co and Mn associated with a Terephthalic (PTA) and Isophthalic (PIPA) acids production plant. Samples were analyzed for elemental composition (37 elements), pH, redox potential, organic carbon, and CaCO 3 content, and a group of 16 selected samples were additionally subjected to a Tessier sequential extraction. Co and Mn soil concentrations were significantly higher inside the industrial facility and around its perimeter than in background samples, and maximum dissolved Co and Mn concentrations were found in a creek near the plant's discharge point, reaching values 17,700 and 156 times higher than their respective background concentrations. The ecological risk was evaluated as a function of Co and Mn fractionation and bioavailability which were controlled by the environmental conditions generated by the advance of seawater into the estuarine system during high tide. Co appeared to precipitate near the river mouth due to the pH increase produced by the influence of seawater intrusion, reaching hazardous concentrations in sediments. In terms of their bioavailability and the corresponding risk assessment code, both Co and Mn present sediment concentrations that result in medium to high ecological risk whereas water concentrations of both elements reach values that more than double their corresponding Secondary Acute Values.

Submittal of SWMU Assessment Report for Building 9960 Surface Discharge

Energy Technology Data Exchange (ETDEWEB)

Dotson, Patrick Wells [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-03-01

Sandia National Laboratories is a multi-purpose engineering and science laboratory owned by the U.S. Department of Energy (DOE)/National Nuclear Security Administration and managed and operated by Sandia Corporation (Sandia), a wholly-owned subsidiary of Lockheed Martin Corporation. This Solid Waste Management Unit (SWMU) Assessment Report (SAR) for the Sandia National Laboratories, New Mexico (SNL/NM), Coyote Test Field, Building 9960 Surface Discharge, has been prepared in accordance with Section V of the Compliance Order on Consent (the Consent Order) between the New Mexico Environment Department (NMED), DOE, and Sandia (NMED April 2004). The DOE and Sandia formally notified the NMED of this newly identified or suspected SWMU or Area of Concern (AOC) by letter dated December 9, 2014. This SAR is being submitted in accordance with the NMED Hazardous Waste Bureau (HWB) letter dated February 16, 2015 letter (Kieling February 2015). This SAR presents the available information for the Building 9960 Surface Discharge, including location, designation of type and function, a general description, the operational dates, waste characteristics, and a summary of existing analytical wastewater and soil data

Impact of industrial effluents on surface waters

International Nuclear Information System (INIS)

Ahmed, K.

2000-01-01

The indiscriminate discharge of untreated municipal and industrial effluents has given rise to serious problems of water pollution and human health in Pakistan. The City of Lahore discharges about 365 mgd of wastewater with a BOD load of 250 tons per day, without treatment, into Ravi river. Because of the untreated industrial discharges, river Ravi is devoid of dissolved oxygen through most of its react between Lahore and Upper Chenab Canal under low flow conditions. Pollution levels can be controlled if each industry treats its own wastewater prior to disposal, in accordance with NEQS (Pakistan). (author)

Environmental impact assessment of european non-ferro mining industries through life-cycle assessment

Science.gov (United States)

Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

2018-05-01

European mining industries are the vast industrial sector which contributes largely on their economy which constitutes of ferro and non-ferro metals and minerals industries. The non-ferro metals extraction and processing industries require focus of attention due to sustainability concerns as their manufacturing processes are highly energy intensive and impacts globally on environment. This paper analyses major environmental effects caused by European metal industries based on the life-cycle impact analysis technologies. This research work is the first work in considering the comparative environmental impact analysis of European non-ferro metal industries which will reveal their technological similarities and dissimilarities to assess their environmental loads. The life-cycle inventory datasets are collected from the EcoInvent database while the analysis is done using the CML baseline and ReCipe endpoint method using SimaPro software version 8.4. The CML and ReCipe method are chosen because they are specialized impact assessment methods for European continent. The impact categories outlined for discussion here are human health, global warming and ecotoxicity. The analysis results reveal that the gold industry is vulnerable for the environment due to waste emission and similar result retained by silver mines a little bit. But copper, lead, manganese and zinc mining processes and industries are environment friendly in terms of metal extraction technologies and waste emissions.

Assessment of accidental refinery wastewater discharge: a case study

Energy Technology Data Exchange (ETDEWEB)

Bandyopadhyay, Amitava [University of Calcutta, Department of Chemical Engineering, Kolkata (India)

2011-04-15

The physicochemical qualities of an accidental discharge of refinery liquid waste, water, and soil sediment of that effluent-receiving water body (canal) were investigated. Analyses of the discharge, qualities of water, and sediment of the canal showed high parametric concentrations. Investigations revealed that the discharge took place form the spent caustic that was generated from the caustic wash tower of Fluidized Catalytic Cracker of the refinery. A simple but realistic model was suggested for the remediation of sediments of the canal with an estimated cost of about US $1.86 million. Recommendations were made to prevent such discharges and to revise thoroughly the Indian effluent discharge standards in force for petroleum oil refinery. Subsequently, revised standards were notified under Indian guidelines. Interestingly, cyanide besides many other parameters was introduced into these standards. Furthermore, Volatile Organic Compound (VOC) was also stipulated as an emission parameter from the waste water treatment plants. Concentration- and mass-based standards thus promulgated were stricter than the existing standards. (orig.)

The nature and source of irregular discharges to stormwater entering Sydney estuary, Australia

International Nuclear Information System (INIS)

Beck, H.J.; Birch, G.F.

2014-01-01

Irregular discharges of polluted stormwater into drainage systems during base flow (no rainfall) result in acute ecological impacts within fluvial and estuarine environments. In this study, metal and TSS concentrations were significantly more variable during business hours of weekdays (i.e. high-business activity) than weekends/public holidays (i.e. low-business activity) within three highly-urbanised catchments of Sydney estuary (Australia), as determined by analysing multivariate dispersion (PERMDISP). Concentrations of TSS and all metals analysed (Al, Ca, Cu, Fe, Mg, Pb and Zn) were also significantly greater during high- than low-business periods within at least one of the three catchments. In no case were concentrations significantly higher during low- than high-business periods. This pattern of contamination supports the hypothesis that commercial and industrial sources are major contributors of irregular discharges of contamination to Sydney estuary. Irregular discharges and consequential ecological impacts may be effectively reduced in this environment by focussing management efforts on these activities. - Highlights: • Irregular discharges of pollution have acute impacts on aquatic ecosystems. • These discharges were thought to be made during low activity periods, such as night. • Pollution was more concentrated and erratic during high- than low-business periods. • Timing of pollution suggests commercial and industrial activities are major sources. • Discharges effectively reduced by managing commercial and industrial activities. - Previously unreported irregular, illegal discharges of polluted stormwater released to estuaries result in acute ecological impacts and are potentially related to commercial/industrial activities

Nursing Assessment and Intervention to Geriatric Patients Discharged From Emergency Department

DEFF Research Database (Denmark)

Rosted, Elizabeth Emilie; Poulsen, Ingrid; Hendriksen, Carsten

% of geriatric patients have complex and often unresolved caring needs. Objective: To examine the effect of a two-stage nursing assessment and intervention to address the patients uncompensated problems given just after discharge from ED and one and six months after. Method: We conducted a prospective...... nursing assessment comprising a checklist of 10 physical, mental, medical and social items. The focus was on unresolved problems which require medical intervention, new or different home care services, or comprehensive geriatric assessment. Following this the nurses made relevant referrals...... to the geriatric outpatient clinic, community health centre, primary physician or arrangements with next-of-kin. Findings: Primary endpoints will be presented as unplanned readmission to ED; admission to nursing home; and death. Secondary endpoints will be presented as physical function; depressive symptoms...

Competency assessments for nuclear industry personnel

International Nuclear Information System (INIS)

2004-04-01

In 1996, the IAEA published Technical Reports Series No. 380, Nuclear Power Plant Personnel Training and its Evaluation: A Guidebook. This publication provides guidance for the development, implementation and evaluation of training programmes for all nuclear power plant personnel using the systematic approach to training (SAT) methodology. The SAT methodology has since been adopted and used for the development and implementation of training programmes for all types of nuclear facility and activities in the nuclear industry. The IAEA Technical Working Group on Training and Qualification of Nuclear Power Plant Personnel recommended that an additional publication be prepared to provide further guidance concerning competency assessments used for measuring the knowledge, skills and attitudes of personnel as the result of training. This publication has been prepared in response to that recommendation. A critical component of SAT (as part of the implementation phase) is the assessment of whether personnel have achieved the standards identified in the training objectives. The nuclear industry spends a significant amount of resources conducting competency assessments. Competency assessments are used for employee selection, trainee assessment, qualification, requalification and authorization (in some Member States the terminology may be 'certification' or 'licensing'), and job advancement and promotion. Ineffective testing methods and procedures, or inappropriate interpretation of test results, can have significant effects on both human performance and nuclear safety. Test development requires unique skills and, as with any skill, training and experience are needed to develop and improve them. Test item and examination development, use, interpretation of results and examination refinement, like all other aspects of SAT, should be part of an ongoing, systematic process. This publication is primarily intended for use by personnel responsible for developing and administering

Study of the metastable singlet of molecular nitrogen and of oxygen atoms in discharges and post-discharges

International Nuclear Information System (INIS)

Magne, Lionel

1991-01-01

Whereas discharges in nitrogen, in oxygen and in their mixtures are used in many different industrial processes (surface treatment, nitridation, oxidation, and so on), in order to get a better knowledge on nitrogen electronic states, this research thesis reports the study of the metastable singlet state of molecular nitrogen, and of oxygen atoms in their fundamental state. The molecular metastable has been observed by far-UV optical emission spectroscopy, in the positive column of a continuous discharge and in time post-discharge. As far as continuous discharge is concerned, the author measured the vibrational distribution of this state. A kinetic model has been developed, and calculated vibrational distributions are in good agreement with measurements. The density of oxygen atoms in fundamental state in time post-discharge has been measured by far-UV absorption optical spectroscopy. The probability of atom re-association of glass walls is deduced from the obtained results [fr

Assessing the Effects of Climate on Global Fluvial Discharge Variability

Science.gov (United States)

Hansford, M. R.; Plink-Bjorklund, P.

2017-12-01

Plink-Bjorklund (2015) established the link between precipitation seasonality and river discharge variability in the monsoon domain and subtropical rivers (see also Leier et al, 2005; Fielding et al., 2009), resulting in distinct morphodynamic processes and a sedimentary record distinct from perennial precipitation zone in tropical rainforest zone and mid latitudes. This study further develops our understanding of discharge variability using a modern global river database created with data from the Global Runoff Data Centre (GRDC). The database consists of daily discharge for 595 river stations and examines them using a series of discharge variability indexes (DVI) on different temporal scales to examine how discharge variability occurs in river systems around the globe. These indexes examine discharge of individual days and monthly averages that allows for comparison of river systems against each other, regardless of size of the river. Comparing river discharge patterns in seven climate zones (arid, cold, humid subtropics, monsoonal, polar, rainforest, and temperate) based off the Koppen-Geiger climate classifications reveals a first order climatic control on discharge patterns and correspondingly sediment transport. Four groupings of discharge patterns emerge when coming climate zones and DVI: persistent, moderate, seasonal, and erratic. This dataset has incredible predictive power about the nature of discharge in fluvial systems around the world. These seasonal effects on surface water supply affects river morphodynamics and sedimentation on a wide timeframe, ranging from large single events to an inter-annual or even decadal timeframe. The resulting sedimentary deposits lead to differences in fluvial architecture on a range of depositional scales from sedimentary structures and bedforms to channel complex systems. These differences are important to accurately model for several reasons, ranging from stratigraphic and paleoenviromental reconstructions to more

Safety assessment of discharge chute isolation barrier preparation and installation activities. Revision 3

International Nuclear Information System (INIS)

Meichle, R.H.

1994-01-01

This revision adds a section addressing impacts of dropping surfacing tool and rack cutter on the basin floor, and corrects typographical errors. The safety assessment is made for the activities for the preparation and installation of the discharge chute isolation barriers. The safety assessment includes a hazard assessment and comparisons of potential accidents/events to those addressed by the current safety basis documentation. No significant hazards were identified. An evaluation against the USQ evaluation questions was made and the determination made that the activities do not represent a USQ. Hazard categorization techniques were used to provide a basis for readiness review classifications

False Labor at Term in Singleton Pregnancies: Discharge After a Standardized Assessment and Perinatal Outcomes.

Science.gov (United States)

Nelson, David B; McIntire, Donald D; Leveno, Kenneth J

2017-07-01

To evaluate perinatal outcomes in women sent home with a diagnosis of false labor at term and assess the time interval to return for delivery. This was a prospective observational cohort study of women at 37 0/7 to 41 6/7 weeks of gestation without pre-existing medical complications who presented to our hospital-based triage unit with symptoms of labor and underwent a standardized evaluation. Women diagnosed as having false labor with a live singleton fetus in cephalic presentation without a prior cesarean delivery and sent home were compared with a group of similar women diagnosed to be in spontaneous labor. Women with hypertension, diabetes, and known fetal malformations were excluded. Using a perinatal composite outcome of respiratory insufficiency, intraventricular hemorrhage, culture-proven sepsis, Apgar score 3 or less at 5 minutes, phototherapy, and perinatal death, we tested the noninferiority of being sent home compared with being admitted for labor. The relationship of cervical dilatation to the time interval from discharge home to delivery was also analyzed. Between October 2012 and March 2016, a total of 3,949 women met inclusion criteria and were diagnosed with false labor, discharged, and returned to deliver, whereas 2,592 similar women were admitted in early labor. The mean interval from discharge to return was 4.9 days. Cesarean delivery rates were not different between the study groups-11% for both (P=.69), and the perinatal composite outcome rates were not significantly different between those sent home and those admitted-3.2% compared with 3.1% (P=.79). Women with more advanced cervical dilatation at discharge returned and delivered significantly earlier than those with less dilatation regardless of parity. Discharge with false labor at term after a standardized assessment in a triage unit was not associated with increased rates of adverse perinatal composite outcomes or cesarean delivery. The time interval to return for delivery was

Industrial Applications of Pulsed Power Technology

Science.gov (United States)

Takaki, Koichi; Katsuki, Sunao

Recent progress of the industrial applications of pulsed power is reviewed in this paper. Repetitively operated pulsed power generators with a moderate peak power have been developed for industrial applications. These generators are reliable and low maintenance. Development of the pulsed power generators helps promote industrial applications of pulsed power for such things as food processing, medical treatment, water treatment, exhaust gas treatment, ozone generation, engine ignition, ion implantation and others. Here, industrial applications of pulsed power are classified by application for biological effects, for pulsed streamer discharges in gases, for pulsed discharges in liquid or liquid-mixture, and for bright radiation sources.

Application of Life Cycle Assessment (LCA) in Sugar Industries

Science.gov (United States)

Astuti, Arieyanti Dwi; Astuti, Rahayu Siwi Dwi; Hadiyanto, Hadiyanto

2018-02-01

Sugar is one of the main commodities that are needed for human life. The demand of sugar is very high with the trend increase from year to year. This condition makes the sugar industry become a leading industry that must be maintained sustainability. The sustainability of the sugar industry is influenced by the use of energy and natural resources and the resulting environmental impacts. Therefore, an effort is needed to analyze the environmental aspects and potential environmental impacts resulting from a product (sugar), by using Life Cycle Assessment (LCA). LCA is a very important tool for the analysis of a process/system from its cradle to grave. This technique is very useful in the estimation of energy usage and environmental load of a product/system. This paper aims to describe the main elements of sugar industries using Life Cycle Assessment.

Regulation, proportionality and discharges of radioactive wastes: UK perspective

International Nuclear Information System (INIS)

Morley, Bob; Butler, Gregg; Mc Glynn, Grace

2008-01-01

In recent years, the UK Government and the Regulators have made a commitment to further improve the operation of the regulatory regime and to its operating within the principles of proportionality, transparency, consistency and accountability which underpin the Government's approach to regulation in general. Particular emphasis was to be placed upon ensuring that there is greater consistency in the treatment of risk and hazard; proportionate and cost effective delivery of public, worker and environmental protection; and an open and transparently applied regulatory system. It is noteworthy that with regard to radiation protection, there are different limits for public doses and workforce doses, with the latter 15 times greater. Allowable doses for medical patients are higher still. This discrepancy raises a question in itself. This presentation focuses on the practical application of the regulatory regime with particular regard to environmental discharges and disposals. Under the Radioactive Substances Act 1993, Operators within the UK nuclear industry are required to employ Best Practicable Means (BPM) to control and minimise radioactive discharges to ensure that doses from discharges are As Low As Reasonably Achievable (ALARA). Scientific assessments to date indicate that there are no expectations of environmental harm from discharges at Sellafield (and hence likewise at other UK nuclear sites where the discharges are lower), even where those discharges have historically been up to two orders of magnitude higher than current levels. Current discharges result in doses which are a small fraction of those received by the UK population due to natural background radiation. In addition, there is no proven environmental harm from foreseeable future discharges from Sellafield or other UK nuclear sites. This is supported by independent work which illustrates that the public collective dose from Sellafield discharges is almost all delivered at risks of less that one in a

Validity of Principal Diagnoses in Discharge Summaries and ICD-10 Coding Assessments Based on National Health Data of Thailand.

Science.gov (United States)

Sukanya, Chongthawonsatid

2017-10-01

This study examined the validity of the principal diagnoses on discharge summaries and coding assessments. Data were collected from the National Health Security Office (NHSO) of Thailand in 2015. In total, 118,971 medical records were audited. The sample was drawn from government hospitals and private hospitals covered by the Universal Coverage Scheme in Thailand. Hospitals and cases were selected using NHSO criteria. The validity of the principal diagnoses listed in the "Summary and Coding Assessment" forms was established by comparing data from the discharge summaries with data obtained from medical record reviews, and additionally, by comparing data from the coding assessments with data in the computerized ICD (the data base used for reimbursement-purposes). The summary assessments had low sensitivities (7.3%-37.9%), high specificities (97.2%-99.8%), low positive predictive values (9.2%-60.7%), and high negative predictive values (95.9%-99.3%). The coding assessments had low sensitivities (31.1%-69.4%), high specificities (99.0%-99.9%), moderate positive predictive values (43.8%-89.0%), and high negative predictive values (97.3%-99.5%). The discharge summaries and codings often contained mistakes, particularly the categories "Endocrine, nutritional, and metabolic diseases", "Symptoms, signs, and abnormal clinical and laboratory findings not elsewhere classified", "Factors influencing health status and contact with health services", and "Injury, poisoning, and certain other consequences of external causes". The validity of the principal diagnoses on the summary and coding assessment forms was found to be low. The training of physicians and coders must be strengthened to improve the validity of discharge summaries and codings.

Water Integration In Sugar Industry

Directory of Open Access Journals (Sweden)

Wafa Hatim Balla

2017-03-01

Full Text Available The sugar industry uses much water and produces a significant amount of wastewater for disposal. Efficient utilization of water is vital in the process industries not only to reduce the cost of the supply and discharge of freshwater associated with the process but also to minimize environmental problems associated with the use and discharge of water. This paper presents the analysis of fresh water used and wastewater discharged in a sugar manufacturing process. In order to reduce the load of the cooling water system. The system was modified to an open recirculation cooling water system. Also the excess condensate internal water and the discharged water from cooling water system were analyzed and optimized using pinch analysis and mathematical optimization techniques by Resource Conversation Networks spreadsheet software.

Development of the Stroke-unit Discharge Guideline: choice of assessment instruments for prediction in the subacute phase post-stroke

NARCIS (Netherlands)

Meijer, Ronald; van Limbeek, Jacques; de Haan, Rob

2006-01-01

The purpose of this paper is to present the design of an evidence-based dataset of assessment instruments for the prognostic factors of the Stroke-unit Discharge Guideline (SDG), a consensus based guideline for the decision of the discharge destination from the hospital stroke unit. In our

Development of the Stroke-unit Discharge Guideline: choice of assessment instruments for prediction in the subacute phase post-stroke.

NARCIS (Netherlands)

Meijer, R.; Limbeek, J. van; Haan, R. de

2006-01-01

The purpose of this paper is to present the design of an evidence-based dataset of assessment instruments for the prognostic factors of the Stroke-unit Discharge Guideline (SDG), a consensus based guideline for the decision of the discharge destination from the hospital stroke unit. In our

The Empirical Relationship between Mining Industry Development and Environmental Pollution in China.

Science.gov (United States)

Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

2017-03-02

This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3) tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries.

The Empirical Relationship between Mining Industry Development and Environmental Pollution in China

Directory of Open Access Journals (Sweden)

Gerui Li

2017-03-01

Full Text Available This study uses a vector autoregression (VAR model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1 because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2 chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3 tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries.

Who cares for the carers at hospital discharge at the end of life? A qualitative study of current practice in discharge planning and the potential value of using The Carer Support Needs Assessment Tool (CSNAT) Approach.

Science.gov (United States)

Ewing, Gail; Austin, Lynn; Jones, Debra; Grande, Gunn

2018-05-01

Carer factors prevent patients achieving timely and appropriate hospital discharge. There is a lack of research into interventions to support carers at hospital discharge. To explore whether and how family carers are currently supported during patient discharge at end of life; to assess perceived benefits, acceptability and feasibility of using The Carer Support Needs Assessment Tool (CSNAT) Approach in the hospital setting to support carers. Qualitative. Three National Health Service Trusts in England: focus groups with 40 hospital and community-based practitioners and 22 carer interviews about experiences of carer support during hospital discharge and views of The CSNAT Approach. Two workshops brought together 14 practitioners and five carers to discuss implementation issues. Framework analysis was conducted. Current barriers to supporting carers at hospital discharge were an organisational focus on patients' needs, what practitioners perceived as carers' often 'unrealistic expectations' of end-of-life caregiving at home and lack of awareness of patients' end-of-life situation. The CSNAT Approach was viewed as enabling carer support and addressing difficulties of discussing the realities of supporting someone at home towards end of life. Implementation in hospital required organisational considerations of practitioner workload and training. To enhance carer support, a two-stage process of assessment and support (hospital with community follow-up) was suggested using the CSNAT as a carer-held record to manage the transition. This study identifies a novel intervention, which expands the focus of discharge planning to include assessment of carers' support needs at transition, potentially preventing breakdown of care at home and patient readmissions to hospital.

Assessing market competition in the Philippine cigarette industry

Directory of Open Access Journals (Sweden)

Meg Reganon

2018-03-01

Full Text Available Background The recent passage of the Philippine Competition Act has caused many to rethink the market structure of Philippine industries. Foremost is the cigarette industry, whose structure bear important implications on the health of Filipinos. A competitive cigarette industry may mean price wars and intensified advertising, disproportionately harming the young and the poor. On the other hand, a concentrated industry may mean a dominant player with ability to engage in predatory pricing. The latter will also likely possess power to lobby against tobacco control policies. In this study, we assess the market competition in the Philippine cigarette industry, and its correlation with cigarette affordability in recent years. Methods Using retail volume data from Euromonitor International and financial reports from the Securities and Exchange Commission, we calculate for various measures of market concentration such as the Top 4 Concentration Ratio (C4, the Herfindahl-Hirschmann Index (HHI, and the Dominance Index (DI over the period 2007 to 2016. We then compare these measures against cigarette affordability trends. Results Across all measures, we find a highly concentrated cigarette industry. C4 ratios ranged from 97%-99%, HHI from 4754-8848, and DI from 7479-9973. In 2010 when Philip Morris acquired Fortune Tobacco, industry concentration peaked (HHI rose by 72% and DI by 33%. In 2012 when the Sin Tax Law was passed, competition slightly intensified with Mighty Corporation taking advantage of the transitionary dual tax structure. Most significantly, fluctuations in market concentration did not affect cigarette affordability. A pack of cigarettes costed 7.4%-8.4% of the daily minimum wage between 2006-2012. Conclusions Assessing the market structure of the cigarette industry better informs the formulation of effective tobacco control regulations. For a concentrated cigarette industry such as in the Philippines, an effective tax policy must temper

Assessing global resource utilization efficiency in the industrial sector

International Nuclear Information System (INIS)

Rosen, Marc A.

2013-01-01

Designing efficient energy systems, which also meet economic, environmental and other objectives and constraints, is a significant challenge. In a world with finite natural resources and large energy demands, it is important to understand not just actual efficiencies, but also limits to efficiency, as the latter identify margins for efficiency improvement. Energy analysis alone is inadequate, e.g., it yields energy efficiencies that do not provide limits to efficiency. To obtain meaningful and useful efficiencies for energy systems, and to clarify losses, exergy analysis is a beneficial and useful tool. Here, the global industrial sector and industries within it are assessed by using energy and exergy methods. The objective is to improve the understanding of the efficiency of global resource use in the industrial sector and, with this information, to facilitate the development, prioritization and ultimate implementation of rational improvement options. Global energy and exergy flow diagrams for the industrial sector are developed and overall efficiencies for the global industrial sector evaluated as 51% based on energy and 30% based on exergy. Consequently, exergy analysis indicates a less efficient picture of energy use in the global industrial sector than does energy analysis. A larger margin for improvement exists from an exergy perspective, compared to the overly optimistic margin indicated by energy. - Highlights: ► The global industrial sector and its industries are assessed by using energy and exergy methods. ► Global industrial sector efficiencies are evaluated as 51% based on energy and 30% based on exergy. ► Exergy analysis shows global industrial energy to be less efficient than does energy analysis. ► A misleadingly low margin for efficiency improvement is indicated by energy analysis. ► A significant and rational margin for efficiency improvement exists from an exergy perspective

Integrating Social Aspect into Sustainability Assessment of Bio-Based Industries: Towards a Systemic Approach

OpenAIRE

Rafiaani, P.; Van Passel, S.; Lebailly, Philippe; Kuppens, T.; Azadi, Hossein; Van Dael, M.

2016-01-01

Biobased industries require to be assessed on their positive and negative impacts on sustainable development. However, social factors are usually neglected in the majority of impact assessments of biobased industries: they are mainly focused on environmental performance and (techno)- economic assessments. This review proposes a new systemic approach for assessing and integrating the social dimension into sustainability assessments of biobased industries. First the main methodologies for as...

Method for improving the electrostatics perforation pattern using power controlled discharges

Energy Technology Data Exchange (ETDEWEB)

Garzon, C; Miranda, E; GarcIa-Garcia, J [Departament d' Enginyeria Electronica, Universitat Autonoma de Barcelona, 08193 Bellaterra, Barcelona (Spain); Martinez-Cisneros, C; Alonso, J, E-mail: carolina.garzon@uab.cat [Departament de Quimica Analitica, Universitat Autonoma de Barcelona, 08193 Bellaterra, Barcelona (Spain)

2011-06-23

The aims of this work are to show the influence of adding a series resistance at the output of a discharge generator circuit and to point out that this component can be used to control the spark energy in electrostatic perforation systems. Analysis of the experimental results reveals that there exists a close connection between the resistor value and the obtained perforation pattern both in hole density and size. The use of a series resistor has a strong influence on the material porosity, which is an important industrial parameter for assessing the pattern perforation quality.

assessment of atmospheric metal depositions in the industrial areas

African Journals Online (AJOL)

Osondu

and Ogun states house many industries which are assumed to have impacted the states. It is in ... southwest Nigeria were assessed to determine the extent of air pollution of these areas. ... of pollutants but are expensive and risks of ... Island) served as the Control site for Lagos ..... cement industry on accumulation of heavy.

Assessing Energy Efficiency Opportunities in US Industrial and Commercial Building Motor Systems

Energy Technology Data Exchange (ETDEWEB)

Rao, Prakash; Sheaffer, Paul; McKane, Aimee; Scheihing, Paul

2015-09-01

In 2002, the United States Department of Energy (USDOE) published an energy efficiency assessment of U.S. industrial sector motor systems titled United States Industrial Electric Motor Systems Market Opportunities Assessment. The assessment advanced motor system efficiency by providing a greater understanding of the energy consumption, use characteristics, and energy efficiency improvement potential of industrial sector motor systems in the U.S. Since 2002, regulations such as Minimum Energy Performance Standards, cost reductions for motor system components such as variable frequency drives, system-integrated motor-driven equipment, and awareness programs for motor system energy efficiency have changed the landscape of U.S. motor system energy consumption. To capture the new landscape, the USDOE has initiated a three-year Motor System Market Assessment (MSMA), led by Lawrence Berkeley National Laboratory (LBNL). The MSMA will assess the energy consumption, operational and maintenance characteristics, and efficiency improvement opportunity of U.S. industrial sector and commercial building motor systems. As part of the MSMA, a significant effort is currently underway to conduct field assessments of motor systems from a sample of facilities representative of U.S. commercial and industrial motor system energy consumption. The Field Assessment Plan used for these assessments builds on recent LBNL research presented at EEMODS 2011 and EEMODS 2013 using methods for characterizing and determining regional motor system energy efficiency opportunities. This paper provides an update on the development and progress of the MSMA, focusing on the Field Assessment Plan and the framework for assessing the global supply chain for emerging motors and drive technologies.

Open Thermodynamic System Concept for Fluviokarst Underground Temperature and Discharge Flow Assessments

Science.gov (United States)

Machetel, P.; Yuen, D. A.

2012-12-01

In this work, we propose to use Open Thermodynamic System (OTS) frameworks to assess temperatures and discharges of underground flows in fluviokarstic systems. The theoretical formulation is built on the first and second laws of thermodynamics. However, such assumptions would require steady states in the Control Volume to cancel the heat exchanges between underground water and embedding rocks. This situation is obviously never perfectly reached in Nature where flow discharges and temperatures vary with rainfalls, recessions and seasonal or diurnal fluctuations. First, we will shortly show that the results of a pumping test campaign on the Cent-Font (Hérault, France) fluviokarst during summer 2005 are consistent with this theoretical approach. Second, we will present the theoretical formalism of the OTS framework that leads to equation systems involving the temperatures and/or the discharges of the underground and surface flows.Third, this approach will be applied to the white (2003) conceptual model of fluviokarst, and we will present the numerical model built to assess the applicability of these assumptions. The first order of the field hydrologic properties observed at the Cent-Fonts resurgence are well described by the calculations based on this OTS framework. If this agreement is necessary, it is not sufficient to validate the method. In order to test its applicability, the mixing process has been modelized as a cooling reaction in a Continuous Stirred Tank Reactor (CSTR) for which matrix and intrusive flows are introduced continuously while effluent water is recovered at the output. The enthalpy of the various flows is conserved except for the part that exchanges heat with the embedding rocks. However the numerical model shows that in the water saturated part of the CS, the matrix flow swepts heat by convective-advective processes while temporal heat fluctuations from intrusive flows cross the CV walls. The numerical model shows that the convective flow from

Wastewater Industrial Contributors

Data.gov (United States)

Iowa State University GIS Support and Research Facility — Industrial contributors to municipal wastewater treatment facilities in Iowa for the National Pollutant Discharge Elimination System (NPDES) program.

Current Trends in Discharge Disposition and Post-discharge Care After Total Joint Arthroplasty.

Science.gov (United States)

Tarity, T David; Swall, Marion M

2017-09-01

The purpose of this manuscript is to review published literature over the last 5 years to assess recent trends and influencing factors regarding discharge disposition and post-discharge care following total joint arthroplasty. We evaluated instruments proposed to predict a patient's discharge disposition and summarize reports investigating the safety in sending more patients home by reviewing complications and readmission rates. Current literature supports decreased length of hospital stay and increased discharge to home with cost savings and stable readmission rates. Surgeons with defined clinical pathways and those who shape patient expectations may more effectively control costs than those without defined pathways. Further research is needed analyzing best practices in care coordination, managing patient expectations, and cost-effective analysis of home discharge while at the same time ensuring patient outcomes are optimized following total joint arthroplasty.

A combined chemical and biological assessment of industrial contamination in an estuarine system in Kerala, India.

Science.gov (United States)

Dsikowitzky, Larissa; Nordhaus, Inga; Sujatha, C H; Akhil, P S; Soman, Kunjupilai; Schwarzbauer, Jan

2014-07-01

The Cochin Backwaters in India are part of the Vembanad-Kol system, which is a protected wetland and one of the largest estuarine ecosystems in South Asia. The backwaters are a major supplier of fisheries resources and are developed as tourist destination. Periyar River discharges into the northern arm of the system and receives effluents from chemical, petrochemical and metal processing industries which release huge amounts of wastewaters after little treatment. We investigated water and sediment contamination in the industrial vicinity and at one station further away including organic and inorganic contaminants. In total 83 organic contaminants were found, e.g. well known priority pollutants such as endosulfan, hexachlorobenzene, DDT, hexachlorocyclohexane and their metabolites, which likely stem from the industrial manufacturing of organochlorine pesticides. Furthermore, several benzothiazole, dibenzylamine and dicyclohexylamine derivatives were detected, which indicated inputs from rubber producing facilities. Several of these compounds have not been reported as environmental contaminants so far. A comparison of organic contaminant and trace hazardous element concentrations in sediments with reported sediment quality guidelines revealed that adverse effects on benthic species are likely at all stations. The chemical assessment was combined with an investigation of macrobenthic diversity and community composition. Benthic organisms were completely lacking at the site with the highest trace hazardous element concentrations. Highest species numbers, diversity indices and abundances were recorded at the station with the greatest distance to the industrial area. Filter feeders were nearly completely lacking, probably leading to an impairment of the filter function in this area. This study shows that a combination of chemical and biological methods is an innovative approach to achieve a comprehensive characterization of industrial contamination, to evaluate

The status of wastewater management in Shokuhieh industrial park (A case study of Qom province

Directory of Open Access Journals (Sweden)

Mohammad Fahiminia

2015-12-01

Full Text Available Background: Water resource management is a strategic issue in Qom city. Water scarcity is one of the most critical concerns of industrial estates. This study aimed to evaluate wastewater management in the Shokuhieh industrial park of Qom province in 2013. Methods: This is a descriptive cross-sectional study done by visiting the industrial units in person, completing questionnaires and analyzing the results. The questionnaire had 25 questions, including general information, the status of water supply, treatment and consumption, wastewater production, reuse or discharge of produced wastewater and the status of wastewater treatment and discharge of effluent. The industrial units evaluated were active with over 50 personnel and numbered 44 in total. Results: The water suppliers in the industries included network (70.5%, network and reverse osmosis (RO (22.5%, network and tanker (2.4% and tanker (4.6%. 63.63% of the industries had water treatment systems. 19.5% reused wastewater and 31.8% performed pretreatment before discharge of wastewater. The discharge sites of water treatment units’ effluent included the absorption well (17%, greenbelt (18% and sewer (65%. Discharge sites of sanitary wastewater in 50% of the industries was sewer and in 50%, it was absorption well. The discharge sites of processed wastewater was reuse (2%, sewer (52% and absorption well (46%. Discharge sites of exiting effluent from pretreatment units in the industrial park, included sewer (85.5%, transport by tanker (7.1% and absorption well (7.1%. The type of pretreatment process in 35.7% of the industries was chemical and in 64.3%, it was septic tank. Conclusion: The results of this study showed that pre-treatment is not done in most industries and wastewater reuse is performed in few industries. The main method of wastewater disposal in industries was by discharge into the sewer and absorbent well.

Impact of Pharmacist Facilitated Discharge Medication Reconciliation

Directory of Open Access Journals (Sweden)

Todd M. Super

2014-07-01

Full Text Available Preventable adverse drug events occur frequently at transitions in care and are a problem for many patients following hospital discharge. Many of these problems can be attributed to poor medication reconciliation. The purpose of this study was to assess the impact that direct pharmacist involvement in the discharge medication reconciliation process had on medication discrepancies, patient outcomes, and satisfaction. A cohort study of 70 patients was designed to assess the impact of pharmacist facilitated discharge medication reconciliation at a 204-bed community hospital in Battle Creek, Michigan, USA. Discharge summaries were analyzed to compare patients who received standard discharge without pharmacist involvement to those having pharmacist involvement. The total number of discrepancies in the group without pharmacist involvement was significantly higher than that of the pharmacist facilitated group.

An assessment method of long-term radiation impacts to environment and public individual from tritium discharged by inland NPP

International Nuclear Information System (INIS)

Shangguan Zhihong; Huang Yanjun; Tao Yunliang

2012-01-01

In this paper, an assessment method of environmental impacts from long-term releases of tritium of inland nuclear power plant is proposed; the tritium concentrations in different environmental materials, including the two main chemical form HTO and OBT. and the radiation dose to public individuals including drinking water, food, inhalation. skin adsorption, are estimated based on the method and environmental parameters from typical inland NPP. The two discharge pathways, gaseous and liquid, are considered with particular concerns to drinking and irrigation ascribed to liquid discharge. This study would contribute to the assessment techniques of environmental impacts and safety of inland NPP. (authors)

Optical signatures of discharges in parallel coupled DC accelerator

Energy Technology Data Exchange (ETDEWEB)

Rajan, Rehim N.; Banerjee, Srutarshi; Acharya, S.N., E-mail: rehim@barc.gov.in [Accelerator and Pulse Power Division, Bhabha Atomic Research Centre, Mumbai (India); and others

2014-07-01

Parallel coupled voltage multiplier based accelerator topologies offer advantages of better regulation and ripple compared to their series coupled counterparts for Industrial electron beam accelerators. During conditioning and operation these systems undergoes various types of electrical discharges. The discharge can be a direct spark over from the high voltage terminal to ground through SF{sub 6} insulation, vacuum breakdown in the accelerating tube maintained in the order of 10{sup -7} mbar pressure, or local discharge between corona guards which are used to couple RF power to the multiplier. There could be discharges in between dynodes of the accelerating tube. As the inter electrode discharges do not reflect in load current, detection of these conditions becomes very difficult. Optical discharge detection methods can be used effectively in this situation. Photo multiplier based optical discharge detection has been deployed in a 3 MeV DC accelerator. Characteristics of the optical signal received during conditioning phase have been presented in this paper. (author)

Design and assessment of urban drainage and water reuse systems for the reconstruction of formerly industrial areas: a case in Beijing.

Science.gov (United States)

Liu, L; Zeng, S; Dong, X; Chen, J

2013-01-01

The Shougang Group is an industrial steel enterprise occupying 800 ha in Beijing that will cease production by 2010. The area will be converted to a new financial and commercial zone. The rebuilding of the water infrastructure in this area should address water shortages in Beijing and retain the industrial landmark of a large cooling water tank. A design framework and an assessment system with 11 indicators were developed for this purpose. Four reconstruction schemes are presented here. Scheme 1 is a traditional system that completely depends on outside the municipal facility. Schemes 2, 3, and 4 are systems to separately discharge greywater and blackwater. Scheme 4 uses a vacuum system that allows the reclamation of nutrients. Schemes 2 and 4 use wetland-treated greywater to fill the water tank. Scheme 3 reuses greywater for toilets after on-site treatment. Scheme 2 is recommended due to its lower cost, greater environmental benefit, moderate resource reclamation, and higher technical feasibility.

Assessment of the industrial energy-conservation program. Final report of the Committee on Assessment of the Industrial Energy Conservation Program

Energy Technology Data Exchange (ETDEWEB)

None

1982-01-01

Industrial operations in the United States account for some 37% of the nation's consumptions of energy. It has been estimated that this figure will increase to 50% by 1990 unless appropriate industrial energy conservation measures are adopted. However, such measures are difficult to implement in spite of the potential of various existing, emerging, and advanced technologies that can be applied to the problem. Specifically, the application of many industrial energy conservation measures entails high economic, technological, and institutional risks and uncertainties that constrain industries from adopting such measures. Accordingly, in 1975 the federal government started a program designed to mitigate these risks and uncertainties via government-industry partnership arrangements in the interests of national energy conservation. An important element of this program is the Industrial Energy Conservation Program in the Federal Department of Energy (DOE). In June 1980, DOE asked the National Materials Advisory Board, a unit of the National Academy of Sciences-National Research Council, to form a study committee to assess the effectiveness of the Industrial Energy Conservation Program. The committee concluded that federal support embodied in the DOE program, present and planned, is important to conserving additional industrial energy. However, the committee also concluded that the program needs various improvements in project selection and management and in transfer of results to industry. The committee's findings and recommendations and the results of the deliberation of the committee's three panels, a special report on heat and power, and a report on the visit by four members of the committee to Japan are presented.

Coal-fired power plant: airborne routine discharges

International Nuclear Information System (INIS)

Zeevaert, T.

2005-01-01

The radiological impact from non-nuclear industries is a growing matter of concern to stake holders and regulators. It has been demonstrated that atmospheric discharges from coal-fired power plants can lead to higher dose-impacts to critical groups of the population than nuclear power plants. In Belgium, in the frame of an agreement between electricity producers and national authorities, measures were taken in conventional power plants to restrict airborne discharges of SO 2 , NO x and suspended particles. In the 500 MWe coal-fired power plant of Langerlo, a flue gas purification system was installed, consisting of a denitrification unit and a desulphurization unit, next to the electrostatic dust filter units. These measures have also an important effect on the radioactive atmospheric discharges. The objective of this study was to assess the radiological impact of the airborne releases of the power plant under normal working conditions and in particular the influence of the installation of the flue gas purification system. As a first step, we measured the natural radioactivity content of the coal and the radium content of the fly ash . The quantities of the other radioelements discharged through the chimney, were estimated, assuming the same behaviour as radium, except for the more volatile lead and polonium, which will condense preferably on finer ash particles, against which the electro filters are less effective. (A concentration factor of 4 has been adopted). The radon, present in the coal, is assumed to be discharged completely through the chimney. The atmospheric transport, dispersion and deposition of the discharged radionuclides were modelled, applying the bi-Gaussian plume model IFDM. For the calculations, we used hourly averages of the meteorological observations at Mol over the year 1991. The transfers of the radionuclides from air and soil to the biospheric media, exposing man, were calculated with our biosphere model and the radiological impact to the

Strategic Implications of Water Usage: an Analysis in Brazilian Mining Industries

Directory of Open Access Journals (Sweden)

Roberto Schoproni Bichueti

2014-04-01

Full Text Available This study aims at identifying the practices of water use management and the business performance in industries in the Brazilian mineral sector. To this end, a descriptive and quantitative study was developed, using the survey method, in industries associated with the Brazilian Mining Institute – IBRAM. The water use management practices were identified based in a model addressing the following aspects: water accounting, risk assessment, direct operations, supply chain, and stakeholders engagement. The business performance was measured from a model involving the following dimensions: economic, environmental and social. Among the results, the risks assessment involved and the direct operations practices stand out, in order to reduce the amount of water used and waste discharges. The need for greater engagement of industries with the stakeholders and the supply chain, through a more integrated and collaborative management, was also evident.

Simulation Modeling of Resilience Assessment in Indonesian Fertiliser Industry Supply Networks

Science.gov (United States)

Utami, I. D.; Holt, R. J.; McKay, A.

2018-01-01

Supply network resilience is a significant aspect in the performance of the Indonesian fertiliser industry. Decision makers use risk assessment and port management reports to evaluate the availability of infrastructure. An opportunity was identified to incorporate both types of data into an approach for the measurement of resilience. A framework, based on a synthesis of literature and interviews with industry practitioners, covering both social and technical factors is introduced. A simulation model was then built to allow managers to explore implications for resilience and predict levels of risk in different scenarios. Result of interview with respondens from Indonesian fertiliser industry indicated that the simulation model could be valuable in the assessment. This paper provides details of the simulation model for decision makers to explore levels of risk in supply networks. For practitioners, the model could be used by government to assess the current condition of supply networks in Indonesian industries. On the other hand, for academia, the approach provides a new application of agent-based models in research on supply network resilience and presents a real example of how agent-based modeling could be used as to support the assessment approach.

An industry approach to the risk assessment of pesticides

Energy Technology Data Exchange (ETDEWEB)

Thomas, Barry [Schering Agrochemicals Ltd., Chesterford Park Research Station, Saffron Walder, Essex (United Kingdom)

1992-07-01

The regulatory control of pesticides has developed over the last 40 years during which time major changes have occurred, not only in the scientific basis of risk assessment but also in the socio-political perception of pesticides and of the agricultural and chemical industries. Traditionally, and logically, the registration of pesticides has been based on a pre-marketing risk-benefit assessment by but changes have occurred in the relative importance associated with the two elements of this assessment. These potential risks have assumed a greater importance as has the acceptability of such risks. By contrast the benefits of using plant protection products to increase agricultural productivity and production has assumed less importance in the light of perceived agricultural surpluses, at least in the Developed Countries. This paper will consider current and future regulatory requirements for pesticides and identify some of the key areas which are of importance to the Plant Protection Industry. It will also discuss initiatives, by both the Industry and Government, aimed at ensuring the safe use of plant protection products, how such initiatives are likely to impact on new product developments and the consequential effects on global food supplies.

An industry approach to the risk assessment of pesticides

International Nuclear Information System (INIS)

Thomas, Barry

1992-01-01

The regulatory control of pesticides has developed over the last 40 years during which time major changes have occurred, not only in the scientific basis of risk assessment but also in the socio-political perception of pesticides and of the agricultural and chemical industries. Traditionally, and logically, the registration of pesticides has been based on a pre-marketing risk-benefit assessment by but changes have occurred in the relative importance associated with the two elements of this assessment. These potential risks have assumed a greater importance as has the acceptability of such risks. By contrast the benefits of using plant protection products to increase agricultural productivity and production has assumed less importance in the light of perceived agricultural surpluses, at least in the Developed Countries. This paper will consider current and future regulatory requirements for pesticides and identify some of the key areas which are of importance to the Plant Protection Industry. It will also discuss initiatives, by both the Industry and Government, aimed at ensuring the safe use of plant protection products, how such initiatives are likely to impact on new product developments and the consequential effects on global food supplies

Identification of significant pressures and assessment of wastewater discharge on Krivaja River water quality

Directory of Open Access Journals (Sweden)

Pešić Vesna Z.

2017-01-01

Full Text Available One of the key stages of the process of preparing management plans for the river basin is the analysis of pressures and impacts, as well as the risk assessment of failing to achieve the environmental objectives. DPSIR framework (Driving Forces-Pressure-State-Impact-Response was developed by the European Agency for the environmental protection, and makes the conceptual basis for the pressures and impacts analysis, taking into account the complexity of the interactions in the environment and represents the tool for their analysis. Impact assessment of the water body requires some quantitative information to describe the condition of the water body and/or the pressures that act on it. The aim of the study was to determine the effect of wastewater discharge on Krivaja watercourse. Impact assessment is carried out based on data of polluters’ wastewater and monitoring information for water in Krivaja. For each site at which sampling was performed, the specific risk quotients for surface water were calculated, as the ratio of the each pollutant concentration in surface water at the sampling point and environmental quality standards for pollutants, as well as their sum that represents the risk index. In order to have the integrated perceive of processes in the Krivaja River, taking into account cumulative effects from point sources, the concept of total maximum daily load was applied, using which the pollution amount, that can be discharged daily in a water body without degrading his prescribed/required quality, was calculated. Comparison of emitted loads from pollution point sources with maximum allowable ones was performed. Wastewaters of different polluters located on Krivaja are, due to insufficient treatment, very loaded with organic matter and nutrients. Krivaja receives daily 1332 m3 of wastewater, 999 kg COD, 722 kg BOD, 144 kg of nitrogen, 4.3 kg of phosphorus and 627 kg of suspended solids. Of the total wastewater volume, the majority (69

[Completeness assessment of the Breton registry of congenital abnormalities: A checking tool based on hospital discharge data].

Science.gov (United States)

Riou, C; Rouget, F; Sinteff, J-P; Pladys, P; Cuggia, M

2015-08-01

Exhaustiveness is required for registries. In the Breton registry of congenital abnormalities, cases are recorded at the source. We use hospital discharge data in order to verify the completeness of the registry. In this paper, we present a computerized tool for completeness assessment applied to the Breton registry. All the medical information departments were solicited once a year, asking for infant medical stays for newborns alive at one year old and for mother's stays if not. Files were transmitted by secure messaging and data were processed on a secure server. An identity-matching algorithm was applied and a similarity score calculated. When the record was not linked automatically or manually, the medical record had to be consulted. The exhaustiveness rate was assessed using the capture recapture method and the proportion of cases matched manually was used to assess the identity matching algorithm. The computerized tool bas been used in common practice since June 2012 by the registry investigators. The results presented concerned the years 2011 and 2012. There were 470 potential cases identified from the hospital discharge data in 2011 and 538 in 2012, 35 new cases were detected in 2011 (32 children born alive and 3 stillborn), and 33 in 2012 (children born alive). There were respectively 85 and 137 false-positive cases. The theorical exhaustiveness rate reached 91% for both years. The rate of exact matching amounted to 68%; 6% of the potential cases were linked manually. Hospital discharge databases contribute to the quality of the registry even though reports are made at the source. The implemented tool facilitates the investigator's work. In the future, use of the national identifying number, when allowed, should facilitate linkage between registry data and hospital discharge data. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Recycled water reuse permit renewal application for the materials and fuels complex industrial waste ditch and industrial waste pond

Energy Technology Data Exchange (ETDEWEB)

Name, No

2014-10-01

This renewal application for the Industrial Wastewater Reuse Permit (IWRP) WRU-I-0160-01 at Idaho National Laboratory (INL), Materials and Fuels Complex (MFC) Industrial Waste Ditch (IWD) and Industrial Waste Pond (IWP) is being submitted to the State of Idaho, Department of Environmental Quality (DEQ). This application has been prepared in compliance with the requirements in IDAPA 58.01.17, Recycled Water Rules. Information in this application is consistent with the IDAPA 58.01.17 rules, pre-application meeting, and the Guidance for Reclamation and Reuse of Municipal and Industrial Wastewater (September 2007). This application is being submitted using much of the same information contained in the initial permit application, submitted in 2007, and modification, in 2012. There have been no significant changes to the information and operations covered in the existing IWRP. Summary of the monitoring results and operation activity that has occurred since the issuance of the WRP has been included. MFC has operated the IWP and IWD as regulated wastewater land treatment facilities in compliance with the IDAPA 58.01.17 regulations and the IWRP. Industrial wastewater, consisting primarily of continuous discharges of nonhazardous, nonradioactive, routinely discharged noncontact cooling water and steam condensate, periodic discharges of industrial wastewater from the MFC facility process holdup tanks, and precipitation runoff, are discharged to the IWP and IWD system from various MFC facilities. Wastewater goes to the IWP and IWD with a permitted annual flow of up to 17 million gallons/year. All requirements of the IWRP are being met. The Operations and Maintenance Manual for the Industrial Wastewater System will be updated to include any new requirements.

Risk assessment of radionuclide discharges to sanitary sewers

International Nuclear Information System (INIS)

Galpin, F.L.; Merrell, G.; Rogers, V.C.

1996-01-01

This presentation describes the basic approach and conduct of a study of the possible risks and consequences of radionuclide discharges into a sewage treatment system. The study's objective was to determine if there were any possible significant exposures to either WSSC workers or the public form the discharge of radioactive material into the sewer system. The conduct of this study included a review of applicable regulations, and a case study of some past contamination events. The evaluation of potential occupational exposures involved measurements in the collection system were selected based on their location relative to potential dischargers. Measurement points at the treatment works were selected at points where biosolids might accumulate. Both passive, (TLD) and active, (scintillation detector) measurements were made. A limited number of samples were taken and analyzed. Potential doses to the public were estimated based on the possible pathways to man. Due both to limited resources and other project constraints several assumptions and bounding calculations were necessary to meet the objective. Although the study concluded that there were no present significant health concerns, followup evaluations were recommended. 7 refs., 1 fig., 1 tab

Energy and Process Assessment Protocol for Industrial Buildings

Science.gov (United States)

2007-05-01

condenser surfaces of fouling 6.31 Raise evaporator or lower condenser water temperature 6.2 Optimize chiller sequencing 6.33 Use two-speed or...F increase in CHW supply setpoint the chiller compression motor load will DECREASE 1.5 percent. This is a zero cost ECO. 3.5 Decrease Conden. CTW...energy assessments, universities conducting energy assessment, and Energy Service Performance Contractors) perform Industrial and Energy Optimization

Radioactive clearance discharge of effluent from nuclear and radiation facilities

International Nuclear Information System (INIS)

Liu Xinhua; Xu Chunyan

2013-01-01

On the basis of the basic concepts of radiation safety management system exemption, exclusion and clearance, we expound that the general industrial gaseous and liquid effluent discharges are exempted or excluded, gaseous and liquid effluent discharged from nuclear and radiation facilities are clearance, and non-radioactive. The main purpose of this paper is to clarify the concepts, reach a consensus that the gaseous and liquid effluent discharged from nuclear and radiation facilities are non-radioactive and have no hazard to human health and natural environment. (authors)

Assessment of industry needs for oil shale research and development

Energy Technology Data Exchange (ETDEWEB)

Hackworth, J.H.

1987-05-01

Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry's view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

Dielectric barrier discharge processing of aerospace materials

International Nuclear Information System (INIS)

Scott, S J; Figgures, C C; Dixon, D G

2004-01-01

We report the use of atmospheric pressure, air based, dielectric barrier discharges (DBD) to treat materials commonly used in the aerospace industries. The material samples were processed using a test-bed of a conventional DBD configuration in which the sample formed one of the electrodes and was placed in close proximity to a ceramic electrode. The discharges generated a powerful, cold oxidizing environment which was able to remove organic contaminants, etch primer and paint layers, oxidize aluminium and roughen carbon fibre composites by the selective removal of resin

Modified PADSS (Post Anaesthetic Discharge Scoring System) for monitoring outpatients discharge.

Science.gov (United States)

Palumbo, Piergaspare; Tellan, Guglielmo; Perotti, Bruno; Pacilè, Maria Antonietta; Vietri, Francesco; Illuminati, Giulio

2013-01-01

The decision to discharge a patient undergoing day surgery is a major step in the hospitalization pathway, because it must be achieved without compromising the quality of care, thus ensuring the same assistance and wellbeing as for a long-term stay. Therefore, the use of an objective assessment for the management of a fair and safe discharge is essential. The authors propose the Post Anaesthetic Discharge Scoring System (PADSS), which considers six criteria: vital signs, ambulation, nausea/vomiting, pain, bleeding and voiding. Each criterion is given a score ranging from 0 to 2. Only patients who achieve a score of 9 or more are considered ready for discharge. Furthermore, PADSS has been modified to ensure a higher level of safety, thus the "vital signs" criteria must never score lower than 2, and none of the other five criteria must ever be equal to 0, even if the total score reaches 9. The effectiveness of PADSS was analyzed on 2432 patients, by recording the incidence of postoperative complications and the readmission to hospital. So far PADDS has proved to be an efficient system that guarantees safe discharge.

Assessment of orofacial pain management in a pediatric emergency department and at home after discharge.

Science.gov (United States)

Aguilar de la Red, Yurena; Manrique Martín, Gema; Guerrero Marquez, Gloria; González Herrero, Concepción; Vázquez López, Paula; Míguez Navarro, Concepción

2018-02-01

An inadequate pain management is common in the emergency department. Our objective was to analyze pain management among children with an orofacial infection or trauma in the emergency department and to assess compliance and satisfaction with analgesia prescribed at discharge. Cross-sectional, observational and analytical study in children attending the emergency department for an orofacial infection or trauma over 2 months. Pain management in the emergency department, analgesia prescribed at home and, following a call to parents, treatment provided and its adequacy to control pain were registered. In total, 252patients (mean age: 4.5 years, SD: 3.89) were included. Pain assessment was recorded at the triage for 8.7%, and in the medical report, for 3.6%. Analgesia was administered to 41.3% in the emergency room. At discharge, no analgesia was prescribed to 13.9%; scheduled analgesia, to 25.4%; and as needed, to 60.3%. Pediatricians prescribed scheduled analgesia more frequently than surgeons (34.4% versus 16.5%, p Pain assessment and management was scarce in the emergency department. The most common prescription was as needed, contrary to what is recommended in the guidelines. Analgesic control worked better for trauma injuries than for infections. Sociedad Argentina de Pediatría

An assessment of the industrial markets for softwood clearwood lumber.

Science.gov (United States)

Ivan L. Eastin; Christine L. Lane; Roger D. Fight; Jamie Barbour

1998-01-01

The purpose of this project was to assess market opportunities for second growth clearwood lumber by identifying industry segments that currently utilize clearwood lumber and determining whether alternative markets will continue to exist for clearwood lumber produced from intensively managed forests in the Pacific Northwest. A survey of industrial lumber...

Screening of Industrial Development Policies, Plans and Programs of Strategic Environmental Assessment in the Industrial Sector of Iran

OpenAIRE

J. Nouri; B. Maghsoudlou Kamali

2005-01-01

The present investigation deals with the quality of capacity building and institutional strengthening of Strategic Environmental Assessment (SEA) in the industrial sector as well as determining the environmental strategies for industrial sustainable development in Iran. The leading aim of this paper has been to systematize the environmental considerations in industrial development strategies, policies, plans and programs in the highest strategic decision making processes and to ensure environ...

Monitoring of lightning discharge

International Nuclear Information System (INIS)

Grigor'ev, V.A.

2001-01-01

The paper presents a brief description of a lightning discharge recording system developed at the NPO 'Monitoring Techniques' under the direction of V.M. Moskolenko (Moscow). The system provides information about dangerous environmental occurrences such as tornados and hurricanes, making the forecast of extreme situations possible, especially in the areas of dangerous industries and objects. The created automatic system can be useful in solving the tasks relating to nuclear test monitoring. (author)

Integrated assessment of the phosphate industry

International Nuclear Information System (INIS)

Ryan, M.T.; Cotter, S.J.

1980-05-01

The phosphate industry in the United States includes three major activities, namely, mining and milling of phosphate rock, phosphate product manufacture, and phosphate product use. Phosphatic materials contain uranium, thorium, and their decay products in greater than background amounts. This assessment of the radiological impacts associated with the redistribution of radioactive components of phosphate materials may provide insight into the effects of uranium extraction from phosphate materials for use in the nuclear fuel cycle

Modelling the combined impact of radionuclide discharges reaching rivers

International Nuclear Information System (INIS)

Hilton, J.; Small, S.; Hornby, D.; Scarlett, P.; Harvey, M.; Simmonds, J.; Bexon, A.; Jones, A.

2003-01-01

The Agency currently authorises direct and indirect (via sewerage systems) discharges of liquid radioactive wastes to rivers from nuclear sites and other registered users of radioactivity. Discharges are normally authorised on a site-by-site basis, taking into account the radiological assessment. Radiological assessments are normally made using dilution models to estimate radionuclide activities in the effluents themselves and in the receiving rivers. These data are then combined with information on habits and dose factor information to give a dose assessment for individuals exposed to the discharge. For each site the highest radiological impact is expected immediately downstream of the disposal point where concentrations of radionuclides and resulting doses are highest. The concentration and doses are expected to decline with increasing distance downstream of the disposal point. However, if discharges are made into the river from other establishments higher up the catchment, the total dose may be higher. Recent Environment Agency research projects provided evidence of the potential radiological significance of multiple discharges to a single river. In the light of these studies, the Agency require a robust modelling tool to assist in the assessment of the effects of combined discharges to river systems. The aim of this R and D project was to develop and test modelling tools that could be used to make assessments of the impact of multiple radiological discharge into river systems and to trial them on the upper Thames river system

Environmental and economic assessment of discharges from Gulf of Mexico Region Oil and Gas Operations

International Nuclear Information System (INIS)

Gettleson, D.A.

1997-01-01

Task 3 (Environmental Field Sampling and Analysis of NORM, Heavy Metals, and Organics) and 4 (Monitoring of the Recovery of Impacted Wetland and Open Bay Produced Water Discharge Sites in Coastal Louisiana and Texas) activities involved continued data analysis and report writing. Task 5 (Assessment of Economic Impacts of Offshore and Coastal Discharge Requirements on Present and Future Operations in the Gulf of Mexico Region) was issued as a final report during the previous reporting period. Task 6 (Synthesis of Gulf of Mexico Seafood Consumption and Use Patterns) activities included the preparation of the final report. There were no Task 7 (Technology Transfer Plan) activities to report. Task 8 (Project Management and Deliverables) activities involved the submission of the necessary reports and routine management

Development of a discharge model for the Bopp and Reuther Degasser/Condenser relief valves for heat sink assessment

International Nuclear Information System (INIS)

Hasnaoui, C. . chiheb@hasnaoui.net; Huynh, M.

2004-01-01

A total loss of all sustained engineering heat sinks is considered as a severe accident with low probability of occurrence. Following a total loss of all sustained engineering heat sinks, the Degasser/Condenser relief valves (3332-RV11 and RV21) would then become the sole means available for the depressurization of the primary heat transport system. Accurate estimation of the discharge through these valves is required to assess the impact of this kind of accident on fuel cooling and the primary circuit integrity. This paper describes a model used to estimate the Degasser/Condenser relief valve discharge capacity. This model is used to predict the flow discharge under a range of conditions upstream of the relief valves; from sub-cooled to saturated liquid and up to vapor conditions. The defined model is then used to estimate the relief valve discharge rates under various hypothetical conditions of the PHTS using the Cathena code. (author)

Biodiesel production using fatty acids from food industry waste using corona discharge plasma technology.

Science.gov (United States)

Cubas, A L V; Machado, M M; Pinto, C R S C; Moecke, E H S; Dutra, A R A

2016-01-01

This article aims to describe an alternative and innovative methodology to transform waste, frying oil in a potential energy source, the biodiesel. The biodiesel was produced from fatty acids, using a waste product of the food industry as the raw material. The methodology to be described is the corona discharge plasma technology, which offers advantages such as acceleration of the esterification reaction, easy separation of the biodiesel and the elimination of waste generation. The best conditions were found to be an oil/methanol molar ratio of 6:1, ambient temperature (25 °C) and reaction time of 110 min and 30 mL of sample. The acid value indicates the content of free fatty acids in the biodiesel and the value obtained in this study was 0.43 mg KOH/g. Peaks corresponding to octadecadienoic acid methyl ester, octadecanoic acid methyl ester and octadecenoic acid methyl ester, from the biodiesel composition, were identified using GC-MS. A major advantage of this process is that the methyl ester can be obtained in the absence of chemical catalysts and without the formation of the co-product (glycerin). Copyright © 2015 Elsevier Ltd. All rights reserved.

Storm Water General Permit 1 for Industrial Facilities

Data.gov (United States)

Iowa State University GIS Support and Research Facility — General permit #1 for storm water discharges associated with industrial facilities in Iowa for the National Pollutant Discharge Elimination System (NPDES) program.

An Assessment of Industrial Customers' Satisfaction at Ethiopian ...

African Journals Online (AJOL)

An Assessment of Industrial Customers' Satisfaction at Ethiopian Electric Power Corporation: A Case of South Addis Ababa Region. ... up with an appropriate service delivery standards, proper complaint handling mechanisms, relevant training for its employees, and strengthening decision making power of employees.

Probabilistic risk assessment in the nuclear power industry

International Nuclear Information System (INIS)

Fullwood, R.R.; Hall, R.E.

1988-01-01

This book describes the more important improvements in risk assessment methodology developed over the last decade. The book covers the following areas - a general view of risk pertaining to nuclear power, mathematics necessary to understand the text, a concise overview of the light water reactors and their features for protecting the public, probabilities and consequences calculated to form risk assessment to the plant, and 34 applications of probabilistic risk assessment (PRA) in the power generation industry. There is a glossary of acronyms and unusual words and a list of references. (author)

The Assessment of Vulnerability of Industrial Parks to Climate Change in South Korea

Science.gov (United States)

Ryu, J. E.; Lee, D. K.; Jung, T. Y.; Choi, K. L.; Lee, S. H.

2014-12-01

Many countries are developing policy and measures to adapt to climate changes at the national and local levels, but the assessment of vulnerability to climate change and the establishment of countermeasures in the industries considering industrial factors such as worker, infrastructure are insufficient due to the characteristics of diverse processes and fields. In South Korea, the national government provides infrastructures for industrial parks where various companies in manufacturing and other industries are concentrated . Because of their concentration, damages can aggravate in case of natural disasters such as typhoons. In this study, vulnerability indices for climate change were developed and evaluated using climate scenarios for the climate exposure of localized terrential downpour for eight industrial parks. The vulnerability indices were selected and reviewed through literature review and two in-depth interviews with experts in various industries, and the assessment of vulnerability to climate change was conducted by collecting relevant information including the Directory of Industrial Complexes. The vulnerability of each industrial park to climate change was assessed for four time serious such as the base line, 2020s, 2050s, and 2100s . As a result, even though the possibility of localized heavy rain was the highest in Yeosu(Southeast coast) at present, but it was predicted that Gwangyang(Southwest coast) will be higher in the future. For the influences of climate including sensitivity, Ulsan Mipo(Southeast coast) is currently under the highest influence of climate, but the Gumi(Inland area) was forecasted to be under the highest influence of climate in the future. As a result of the assessment of vulnerability to climate change including adaptive capacity, Gumi and Myongji Noksan(Southeast coast) were most vulnerable to localized heavy rain. The degree of vulnerability of all the industrial parks except Ulsan and Yeosu was forecasted to increase in the

Assessment of urban and industrial contamination levels in the bay of Cádiz, SW Spain.

Science.gov (United States)

Carrasco, M; López-Ramírez, J A; Benavente, J; López-Aguayo, F; Sales, D

2003-03-01

Measuring the amount of pollution is of particular importance in assessing the quality and general condition of an ecosystem. In this paper, some of the results obtained as a consequence of the specific agreement between the Environmental Agency (Consejería de Medio Ambiente, Junta de Andalucía) and the University of Cadiz to assess the environmental condition of the marine bottom and waters are showed. Physical and chemical analyses in water and sediments were undertaken at various sampling sites close to urban and industrial locations. Later on, these results were studied under statistical analysis to reveal any possible relationships between the parameters employed, and to identify any analogous behaviour between the sampling sites. Physical-chemical data revealed that sediments and waters analysed were moderately contaminated and, in addition, no great differences were found between in rising and ebbing tide conditions. Finally, considering only the pollution level, from the cluster analysis of sediments two major groups appear, one of which corresponded to those sites located in the outer bay, and the other to those situated in the inner bay. However, number 6 and 14 sampling sites cannot be associated to those groups due to be related to points with important local discharges.

Overview of environmental assessment for China nuclear power industry and coal-fired power industry

International Nuclear Information System (INIS)

Zhang Shaodong; Pan Ziqiang; Zhang Yongxing

1994-01-01

A quantitative environmental assessment method and the corresponding computer code are introduced. By the consideration of all fuel cycle steps, it given that the public health risk of China nuclear power industry is 5.2 x 10 -1 man/(GW·a) the public health risk is 2.5 man/(GW·a), and the total health risk is 3.0 man/(GW·a). After the health risk calculation for coal mining, transport, burning up and ash disposal, it gives that the public health risk of China coal-fired power industry is 3.6 man/(GW·a), the occupational health risk is 50 man/(GW·a), and the total is 54 man/(GW·). Accordingly, the conclusion that China nuclear power industry is one with high safety and cleanness is derived at the end

Workshop on technical assessment of industrial thermal insulation materials: summary

International Nuclear Information System (INIS)

Peterson, S.

1976-07-01

Over 80 participants representing 50 organizations met to discuss the report, Industrial Thermal Insulation--An Assessment, ORNL/TM-5283. Presentations on the performance of available materials, economic considerations, and measurement problems were followed by discussion. A final wrap-up session concluded that the report was valuable in pointing the direction for needed effort in the area, confirmed the indicated actions needed to further industrial application of insulation, and called for future meetings to continue the dialogue between the various facets of the industry

Technology assessment of automation trends in the modular home industry

Science.gov (United States)

Phil Mitchell; Robert Russell Hurst

2009-01-01

This report provides an assessment of technology used in manufacturing modular homes in the United States, and that used in the German prefabricated wooden home industry. It is the first step toward identifying the research needs in automation and manufacturing methods that will facilitate mass customization in the home manufacturing industry. Within the United States...

Fowl play? Forensic environmental assessment of alleged discharge of highly contaminated effluent from a chicken slaughterhouse

Science.gov (United States)

Harvey, P.; Taylor, M. P.; Handley, H. K.

2016-12-01

Multiple lines of geochemical and biological evidence are applied to identify and fingerprint the nature and source of alleged contamination emanating from a chicken slaughterhouse on the urban fringe of Sydney, Australia. The slaughterhouse has a long history of alleged environmental misconduct. The impact of the facility on catchment source waters by the slaughterhouse has been the subject of controversy. The facility owner has persistently denied breach of their licence condition and maintains it is `a very environmentally conscious operation'. The disputed nature of the possible sources of discharges and its contaminants required a detailed forensic environmental assessment. Water samples collected from off-site discharge points associated with the facility show highly elevated concentrations of faecal coliforms (max 68,000 cfu), ammonia-N (51,000 µg/L), total nitrogen (98,000 µg/L) and phosphorous (32,000 µg/L). Upstream and adjacent watercourses were markedly less contaminated. Water discharge points associated with the slaughterhouse and natural catchment runoff were sampled for arsenic speciation, including assessment for the organoarsenic compound Roxarsone. Roxarsone is used as a chicken growth promoter. Water draining the slaughterhouse facility contained concentrations around 10 times local background levels. The Roxarsone compound was not detected in any waters, but inorganic arsenic, As(V), was present in all waters with the greatest concentrations in waters draining from the slaughterhouse. The environmental evidence was compiled over a series of discharges events and presented to the NSW EPA. Subsequent to receipt of the data supported by their own investigations, the NSW EPA mandated that the slaughterhouse be subject to a pollution reduction program. The efficacy of the pollution reduction program to stem the release of highly contaminated effluent is currently subject to ongoing investigation using a suite of water chemistry measures including

Long-term study of an estuarine mudflat subjected to petro-chemical discharges

International Nuclear Information System (INIS)

McLusky, D.A.; Martins, T.

1998-01-01

The Kinneil intertidal area, situated in the middle reaches of the Forth estuary, eastern Scotland, has been subject to the effects of industrial discharges, principally from petro-chemical industries (oil refinery and chemical works) since the 1920s. The intertidal fauna has been studied annually since 1976 using consistent methodology. The study continues, now providing over 20 yrs of data. During the study period the discharges from the industrial sources have been reduced substantially through a combination of plant closure and modernization and the installation of effluent treatment works. Furthermore, the River Avon which flows across the area has experienced substantial improvements in water quality, attributed to improvements in waste treatment works at localities upstream from the estuarine site. Overall, however, the clearest trends have been increases in diversity, expressed either as mean number of species per station, or as diversity indices. These increases in diversity are shown to be a clear community response to the improvements made to the petro-chemical wastes discharged to the area. (author)

PFEM-based modeling of industrial granular flows

Science.gov (United States)

Cante, J.; Dávalos, C.; Hernández, J. A.; Oliver, J.; Jonsén, P.; Gustafsson, G.; Häggblad, H.-Å.

2014-05-01

The potential of numerical methods for the solution and optimization of industrial granular flows problems is widely accepted by the industries of this field, the challenge being to promote effectively their industrial practice. In this paper, we attempt to make an exploratory step in this regard by using a numerical model based on continuous mechanics and on the so-called Particle Finite Element Method (PFEM). This goal is achieved by focusing two specific industrial applications in mining industry and pellet manufacturing: silo discharge and calculation of power draw in tumbling mills. Both examples are representative of variations on the granular material mechanical response—varying from a stagnant configuration to a flow condition. The silo discharge is validated using the experimental data, collected on a full-scale flat bottomed cylindrical silo. The simulation is conducted with the aim of characterizing and understanding the correlation between flow patterns and pressures for concentric discharges. In the second example, the potential of PFEM as a numerical tool to track the positions of the particles inside the drum is analyzed. Pressures and wall pressures distribution are also studied. The power draw is also computed and validated against experiments in which the power is plotted in terms of the rotational speed of the drum.

Riskgov European Project. Comparative analysis of risk governance for radiological and chemical discharges of industrial installations. Final report

International Nuclear Information System (INIS)

Schneider, T.; Schieber, C.; Vaillant, L.; Heriard Dubreuil, G.; Gadbois, S.; Oudiz, A.; Bourgoignon, F.; Milochevitch, A.; PATERSON, J.; Brownless, G.; Bandle, T.; Hansson, S.O.; Hayenhjelm, M.

2004-11-01

The objective of the RISKGOV Project is to analyse and identify quality criteria for the governance of industrial activities giving rise to risks to people and the environment from radioactive and chemical discharges during normal operations. For this purpose, RISKGOV aims at: 1) analysing and comparing the elements contributing to the quality of governance systems associated with environmental discharges from nuclear and chemical installations; 2) providing a series of criteria to assess the quality of the governance of risk activities. In total, 8 case studies were conducted, covering radioactive and chemical releases related to local and international contexts and referring to innovative risk governance processes in France, Sweden and the United Kingdom: - The role of local liaison committees with regard to the management of discharges of installations: - France: Local liaison committee of the Gravelines Nuclear Power Plant, - Sweden: Local liaison committees of the Barsebaeck Nuclear Power Plant and the Rohm and Hass Chemical installation, - The dialogue process during the preparation of re-authorisation of radioactive discharges: - France: COGEMA-La Hague facility, - United-Kingdom: Devonport Royal Dockyard, - The dialogue process in a regional context: - France: Management of air quality around the industrial site of Etang de Berre, - The dialogue process in an international context: - Implementation of the OSPAR Convention for chemical and radioactive releases, - The abandonment of the Brent Spar offshore platform. The analysis was performed by a multidisciplinary research team and based notably on interviews with key stakeholders directly involved in these innovative risk governance processes. The following dimensions were addressed: a) The guiding principles of the decision-making process; b) The role of expertise; c) The stakeholders involvement process; d) The factors integrated into the decision-framing and decision-taking processes; e) The

All solid state pulsed power system for water discharge

OpenAIRE

Sakugawa, Takashi; Yamaguchi, Takahiro; Yamamoto, Kunihiro; Kiyan, Tsuyoshi; Namihira, Takao; Katsuki, Sunao; Akiyama, Hidenori; サクガワ, タカシ; ヤマグチ, タカヒロ; ヤマモト, クニヒロ; キヤン, ツヨシ; ナミヒラ, タカオ; カツキ, スナオ; アキヤマ, ヒデノリ; 佐久川, 貴志

2005-01-01

Pulsed power has been used to produce non-thermal plasmas in gases that generate a high electric field at the tip of streamer discharges, where high energy electrons, free radicals, and ozone are produced. Recently, all solid state pulsed power generators, which are operated with high repetition rate, long lifetime and high reliability, have been developed for industrial applications, such as high repetition rate pulsed gas lasers, high energy density plasma (EUV sources) and water discharges...

Sewage discharges and nutrient levels in Marimba River, Zimbabwe ...

African Journals Online (AJOL)

Sewage discharges and nutrient levels in Marimba River, Zimbabwe. ... Population distribution, land-use, industrial activity, urban agricultural ... River, one of the major inflow rivers into the Lake Chivero, Harare city\\'s main water supply source.

Susceptibility of Staphylococcus aureus biofilms to reactive discharge gases.

Science.gov (United States)

Traba, Christian; Liang, Jun F

2011-08-01

Formation of bacterial biofilms at solid-liquid interfaces creates numerous problems in both industrial and biomedical sciences. In this study, the susceptibility of Staphylococcus aureus biofilms to discharge gas generated from plasma was tested. It was found that despite distinct chemical/physical properties, discharge gases from oxygen, nitrogen, and argon demonstrated very potent and almost the same anti-biofilm activity. The bacterial cells in S. aureus biofilms were killed (>99.9%) by discharge gas within minutes of exposure. Under optimal experimental conditions, no bacteria and biofilm re-growth from discharge gas treated biofilms was found. Further studies revealed that the anti-biofilm activity of the discharge gas occurred by two distinct mechanisms: (1) killing bacteria in biofilms by causing severe cell membrane damage, and (2) damaging the extracellular polymeric matrix in the architecture of the biofilm to release biofilm from the surface of the solid substratum. Information gathered from this study provides an insight into the anti-biofilm mechanisms of plasma and confirms the applications of discharge gas in the treatment of biofilms and biofilm related bacterial infections.

Instream Biological Assessment of NPDES Point Source Discharges at the Savannah River Site, 2000

International Nuclear Information System (INIS)

Specht, W.L.

2001-01-01

The Savannah River Site (SRS) currently has 31 NPDES outfalls that have been permitted by the South Carolina Department of Health and Environmental Control (SCDHEC) to discharge to SRS streams and the Savannah River. In order to determine the cumulative impacts of these discharges to the receiving streams, a study plan was developed to perform in-stream assessments of the fish assemblages, macroinvertebrate assemblages, and habitats of the receiving streams. These studies were designed to detect biological impacts due to point source discharges. Sampling was initially conducted between November 1997 and July 1998 and was repeated in the summer and fall of 2000. A total of 18 locations were sampled (Table 1, Figure 1). Sampling locations for fish and macroinvertebrates were generally the same. However, different locations were sampled for fish (Road A-2) and macroinvertebrates (Road C) in the lower portion of Upper Three Runs, to avoid interference with ongoing fisheries studies at Road C. Also, fish were sampled in Fourmile Branch at Road 4 rather than at Road F because the stream at Road F was too narrow and shallow to support many fish. Sampling locations and parameters are detailed in Sections 2 and 3 of this report. In general, sampling locations were selected that would permit comparisons upstream and downstream of NPDES outfalls. In instances where this approach was not feasible because effluents discharge into the headwaters of a stream, appropriate unimpacted reference were used for comparison purposes. This report summarizes the results of the sampling that was conducted in 2000 and also compares these data to the data that were collected in 1997 and 1998

Central peaking of magnetized gas discharges

International Nuclear Information System (INIS)

Chen, Francis F.; Curreli, Davide

2013-01-01

Partially ionized gas discharges used in industry are often driven by radiofrequency (rf) power applied at the periphery of a cylinder. It is found that the plasma density n is usually flat or peaked on axis even if the skin depth of the rf field is thin compared with the chamber radius a. Previous attempts at explaining this did not account for the finite length of the discharge and the boundary conditions at the endplates. A simple 1D model is used to focus on the basic mechanism: the short-circuit effect. It is found that a strong electric field (E-field) scaled to electron temperature T e , drives the ions inward. The resulting density profile is peaked on axis and has a shape independent of pressure or discharge radius. This “universal” profile is not affected by a dc magnetic field (B-field) as long as the ion Larmor radius is larger than a

Internationalization as a strategy to overcome industry barriers-An assessment of the marine energy industry

International Nuclear Information System (INIS)

Lovdal, Nicolai; Neumann, Frank

2011-01-01

Research on conditions to develop new innovations within emerging renewable energy industries is often done with a national focus. However, recent research on international entrepreneurship has revealed that firms operate on international levels very early in their life time. Thus, based on former research on international entrepreneurship and case examples, we build the propositions that firms in the marine energy industry use internationalization as a strategy to overcome industry barriers. Our primary source of data is a unique dataset from a global survey of all the companies in the marine energy industry who are aiming to commercialize a wave or tidal energy device. This paper is organized in two steps: first we identified the most challenging industry barriers perceived by companies. Second we use these to form propositions which we assess through empirical data. The two most challenging barriers perceived by the companies are need for capital and need for supportive political schemes. Our findings reveal that internationalization certainly is a common strategy to access capital and attractive support schemes in foreign countries. The early internationalization has implications for researchers, managers and policy makers. - Research highlights: → Industry barriers identified as access to capital and supportive political schemes. → International entrepreneurship is used to overcome industry barriers. → Start-ups in emerging energy industries 'shop' national support schemes. → Future research to provide policy advice should adapt to the international reality. → Research based on a worldwide survey of wave and tidal energy device developers.

Internationalization as a strategy to overcome industry barriers-An assessment of the marine energy industry

Energy Technology Data Exchange (ETDEWEB)

Lovdal, Nicolai, E-mail: nicolai.lovdal@iot.ntnu.n [Industrial Economics and Technology Management, Norwegian University of Science and Technology, 7491 Trondheim (Norway); Neumann, Frank, E-mail: frank@wave-energy-centre.or [Wave Energy Centre, Av. Manuel Maia, 36, r/c Dto., 1000-201 Lisboa (Portugal)

2011-03-15

Research on conditions to develop new innovations within emerging renewable energy industries is often done with a national focus. However, recent research on international entrepreneurship has revealed that firms operate on international levels very early in their life time. Thus, based on former research on international entrepreneurship and case examples, we build the propositions that firms in the marine energy industry use internationalization as a strategy to overcome industry barriers. Our primary source of data is a unique dataset from a global survey of all the companies in the marine energy industry who are aiming to commercialize a wave or tidal energy device. This paper is organized in two steps: first we identified the most challenging industry barriers perceived by companies. Second we use these to form propositions which we assess through empirical data. The two most challenging barriers perceived by the companies are need for capital and need for supportive political schemes. Our findings reveal that internationalization certainly is a common strategy to access capital and attractive support schemes in foreign countries. The early internationalization has implications for researchers, managers and policy makers. - Research highlights: {yields} Industry barriers identified as access to capital and supportive political schemes. {yields} International entrepreneurship is used to overcome industry barriers. {yields} Start-ups in emerging energy industries 'shop' national support schemes. {yields} Future research to provide policy advice should adapt to the international reality. {yields} Research based on a worldwide survey of wave and tidal energy device developers.

The FOCON model to assess doses due to the atmospheric radioactive discharges of nuclear facilities during normal operation

International Nuclear Information System (INIS)

Rommens, C.; Morin, A.; Merle-Szeremeta, A.

1999-01-01

The FOCON model to assess doses due to the atmospheric radioactive discharges of nuclear facilities during normal operation. To assess the dosimetric impact to the public due to atmospheric radioactive discharges of nuclear facilities during normal operation, the Institute for Protection and Nuclear Safety has developed the FOCON96 code. FOCON96 calculates the dispersion of gases and aerosols into the environment (atmosphere contamination and ground deposition), their transfer in the biosphere (soils, plants and animals) and their impact to a member of the public (individual effective and equivalent doses, external exposure to the plume and to the deposits, internal exposure by inhalation and ingestion). FOCON96 uses ergonomic windows and proposes many capabilities (modular architecture, default values, choice of libraries, access to all the parameters of the models, listing or results, management of result files, calculations made directly, etc.). In the European context, and intercomparison with the PC-CREAM code, developed by the National Radiological Protection Board, has shown the coherence of the results of the two codes. A comparison of the windows and capabilities has shown that FOCON96 was easier to use. FOCON96 is not adapted to calculate the doses received during one particular year that are due to the discharges of a facility in operation for a long period of time. An evolution of the software will be considered if this kind of assessment is generalized. (authors)

77 FR 30022 - U.S. Extractive Industries Transparency Initiative Stakeholder Assessment Public Listening...

Science.gov (United States)

2012-05-21

... DEPARTMENT OF THE INTERIOR [Docket No. ONRR-2012-0003] U.S. Extractive Industries Transparency... Extractive Industries Transparency Initiative Stakeholder Assessment and Multi-Stakeholder Group Options. In... in the Extractive Industries Transparency Initiative. EITI is a signature initiative of the U.S...

Assessing outcomes of industrial hygiene graduate education.

Science.gov (United States)

Brosseau, Lisa; Fredrickson, Ann

2009-05-01

To ensure that industrial hygiene professionals continue to be prepared for current and future trends, it is important to regularly assess the value of their education. Described here are the results of discussions with employers and a mailed survey of graduates. Comparisons are made with past mailed surveys of both groups. Two sets of discussions were held in late 2005 with employers of industrial hygienists and other health and safety professionals. Twenty-eight participants were asked to discuss current and future needs for professionals in their organization and economic sector, their expectations for knowledge and skills when hiring professionals, methods for finding and hiring, and the importance of ABET accreditation. At the same time, a survey was mailed to 71 industrial hygiene students graduating in the last 15 years. Respondents were asked to rank the value of and their proficiency in 42 competencies. Questions also assessed employment experience, certification, the importance of ABET accreditation, and demographic characteristics. There was a lot of agreement between the two stakeholder groups (employers and graduates) about the most important skill and knowledge areas. Most employers identified communicating effectively and exposure assessment among the most important skills, with designing and initiating research as among the least. Hazard recognition, exposure measurement principles, and personal protective equipment were the most highly ranked knowledge areas. Employers discussed the need for good "business skills" such as teamwork, communication, and project management, and the importance of problem-solving skills. Graduates reported that skills in the areas of recognition, evaluation, and control were most valuable in their first jobs and generally reported high levels of proficiency in these skill areas. There was a similar dichotomy in opinions about accreditation within each stakeholder group. The reputation of the academic program was

Discharges from a fast reactor reprocessing plant

International Nuclear Information System (INIS)

Barnes, D.S.

1987-01-01

The purpose of this paper is to assess the environmental impact of the calculated routine discharges from a fast reactor fuel reprocessing plant. These assessments have been carried out during the early stages of an evolving in-depth study which culminated in the design for a European demonstration reprocessing plant (EDRP). This plant would be capable of reprocessing irradiated fuel from a series of European fast reactors. Cost-benefit analysis has then been used to assess whether further reductions in the currently predicted routine discharges would be economically justified

Prototype study of characterization of the impact that produces the diffuser of an industrial discharge into the sea water; Estudio prototipo de caracterizacion del impacto que produce el difusor de una descarga industrial sobre el medio marino

Energy Technology Data Exchange (ETDEWEB)

Ortiz Gallarza, S. M.; Gil Zurita, A.; Garcia Hernandez, R.; Vergara Mendez, S.; Garcia Leal, M. L. [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

2000-09-01

To establish maximum permissible limits of pollutants discharged into the sea from industrial wastewater, the authorities involved in the environmental protection and regulation had established particular characteristic for their discharges in each enterprise. In addition to taking care of the conservation of those limits, the effect of these substances on the environment needs to be evaluated. Along this line, integral multidisciplinary studies of impact characterization on the marine environment induced by the industry have been carried out. One of the industrial enterprises that discharges into the northwestern coastline of the Gulf of Mexico through a submarine diffuser, requested the execution of the first study of this kind. This prototype study included physical, chemical, biological and geological determinations in a network of 49 sampling sites along six transects positioned from a boat, and with theodolites from the coast; covering five depth levels (surface, 4, 8, 12 and 16 m) during rainy, dry and northern winds seasons. Heavy metals in the water, sediments, and organisms and in combined samples of the industrial discharge were determined. Continuous measurements of marine currents, salinity and temperature in the nozzles of the diffuser were performed by means of two S4 Inter Ocean current meters. Helicopters flights were made to observe the displacement variations of the pollutants plume under various climatic conditions. LANDSAT TM satellite images were acquired to obtain information on diverse regions of the electromagnetic spectrum and to verify observations on the behavior of the discharge plume. Besides the conventional methods of plotting and information processing, tri-dimensional visualization was applied with the purpose of interpreting seasonal and diffusion patterns. Because of the excellent results obtained with this methodology, this study is made available to specialists as a prototype for determining the coastal marine environmental

Impact of thermal discharge on marine environment - an overview

International Nuclear Information System (INIS)

Murugesan, A.G.; Rameshwari, S.; Sukumaran, N.

2002-01-01

Thermal pollution has been used to indicate the detrimental effects of heated effluents discharged by power plants and other industries. It denotes the impairment of quality and deterioration of aquatic and terrestrial environment through heated effluent and fly ash. Various industrial plants like thermal, atomic, nuclear, coal fired plants, oil field generators, factories and mills utilize water for cooling purposes. In India, there are about 60 thermal power plants, which produce 30 million tonnes of fly ash every year. The heated effluents from power plants is discharged at a temperature, which is 8-10 degC higher than that of intake marine water. The adverse effect of thermal discharge are visible in microorganism, fish, biotic life and the over all ecosystems. The discharge of heated effluents actually affects the fish respiration, metabolism and other physiological activities of marine organisms, which ultimately leads to death. This could be due to synergism because of toxic chemical such as copper, nickel, chromium and chlorine, which are used to remove slimes in the pipelines. The major waste material from thermal power station is the fly ash that creates enormous pollution problem to air, water and soil environment. Fly ash possess large amounts of lead, cobalt, chromium, cadmium etc. When this fly ash is released out through water carriage system it leads to turbidity, over deposition and flood also. Tuticorin Thermal Power Station (TTPS) has installed five power generation units each of 250 MW capacities. About 1.35 lakhs m 3 /hr water is drawn from the sea, utilized for cooling and then the heated effluent is discharged into the same environment. Therefore, this paper deals with various impacts associated with thermal discharge on marine environment. (author)

Assessing the contribution of the main aquifer of Loire basin to the river discharge during low flow

International Nuclear Information System (INIS)

Monteil, C.

2011-01-01

The evolution of the Loire river low flows is a key issue for various uses such as water supply, irrigation or industrial needs. Power production is a major activity in the Loire basin with four nuclear power plants using the river water for the cooling system. To estimate the evolution of long term in-stream low flow distribution, it is necessary to have a good estimate of the contribution of a complex aquifer system to the river discharge. Three main overlaying aquifer units covering an area of 38000 km 2 are considered: Beauce Limestones (Oligocene), Chalks (Seno-Turonian) and Sands (Cenomanian). A distributed hydrogeological model (Eau-Dyssee) is implemented with the coupling of five modules: surface water budget, watershed routing, river routing, unsaturated zone transfer, and groundwater flow. The model is calibrated over a 10-yr period, validated over another 10-yr period, and then a test simulation is run over 35 years. A hybrid fitting methodology, based on an automated inverse method and a trial-error one, has been developed for the fitting of the Beauce aquifer unit. The other units are calibrated by trial and error. The fitted model simulates properly both discharges and piezometric heads over the whole domain, with a global RMSE between simulated and observed piezometric heads of 2.86 m, and all Nash efficiency at the Loire discharge gauging stations over 0.9. The fitted model has then been used to quantify the hydro-system mass balance at different time scales. Mean aquifer contribution to Loire river discharge during low flow between 1975 and 2008 is estimated at 15 m 3 /s. First results of simulations under four different climate change projections indicate an averaged decrease of these contributions reaching 8 to 50% in 2100. (author)

Distributed Wind Resource Assessment: State of the Industry

Energy Technology Data Exchange (ETDEWEB)

Fields, Jason [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tinnesand, Heidi [National Renewable Energy Lab. (NREL), Golden, CO (United States); Baring-Gould, Ian [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-06-01

In support of the U.S. Department of Energy (DOE) Wind and Water Power Technologies Office (WWPTO) goals, researchers from DOE's National Renewable Energy Laboratory (NREL), National Wind Technology Center (NWTC) are investigating the Distributed Wind Resource Assessment (DWRA) process, which includes pre-construction energy estimation as well as turbine site suitability assessment. DWRA can have a direct impact on the Wind Program goals of maximizing stakeholder confidence in turbine performance and safety as well as reducing the levelized cost of energy (LCOE). One of the major components of the LCOE equation is annual energy production. DWRA improvements can maximize the annual energy production, thereby lowering the overall LCOE and improving stakeholder confidence in the distributed wind technology sector by providing more accurate predictions of power production. Over the long term, one of the most significant benefits of a more defined DWRA process could be new turbine designs, tuned to site-specific characteristics that will help the distributed wind industry follow a similar trajectory to the low-wind-speed designs in the utility-scale industry sector. By understanding the wind resource better, the industry could install larger rotors, capture more energy, and as a result, increase deployment while lowering the LCOE. a direct impact on the Wind Program goals of maximizing stakeholder confidence in turbine performance and safety as well as reducing the levelized cost of energy (LCOE). One of the major components of the LCOE equation is annual energy production. DWRA improvements can maximize the annual energy production, thereby lowering the overall LCOE and improving stakeholder confidence in the distributed wind technology sector by providing more accurate predictions of power production. Over the long term, one of the most significant benefits of a more defined DWRA process could be new turbine designs, tuned to site-specific characteristics that

Angina - discharge

Science.gov (United States)

Chest pain - discharge; Stable angina - discharge; Chronic angina - discharge; Variant angina - discharge; Angina pectoris - discharge; Accelerating angina - discharge; New-onset angina - discharge; Angina-unstable - discharge; ...

Technical note: Intraobserver, interobserver, and test-retest reliabilities of an assessment of vaginal discharge from cows with and without acute puerperal metritis.

Science.gov (United States)

Sannmann, I; Heuwieser, W

2015-08-01

Acute puerperal metritis (APM) in dairy cows is a common disease occurring in the first 10 d after calving. According to a widely accepted definition, the diagnosis is primarily based on body temperature and sensorial assessment of vaginal discharge. The scope of this study was to evaluate the reliability for color, smell, and viscosity of vaginal discharge from healthy cows and cows with APM. Fifteen investigators evaluated 6 vaginal discharge samples 10 times. Subsequently, the investigators rated the health status of the cows and the diagnostic value of color, smell, and viscosity. In a final questionnaire, the investigators estimated their ability to diagnose APM correctly and the influence of experience. Reliability was tested using Cohen's kappa (κ). Our study revealed slight to moderate reliabilities concerning the assessment of vaginal discharge. Overall interobserver reliability for color, smell, and viscosity was κ=0.15, 0.27, and 0.44, respectively. Overall intraobserver reliability for color, smell, and viscosity was κ=0.35, 0.39, and 0.6, respectively. By means of a questionnaire, overall personal expertise to detect cows suffering from APM correctly as such was estimated to be 59%, whereas the diagnostic value of a combination of color, smell, and viscosity to detect cows with APM correctly was estimated to be 91.1% perfect. We found a discrepancy between reliability and the personal perception of diagnostic value. Our study shows that the sensorial assessment of color, smell, and viscosity of vaginal discharge in cows postpartum is subjective. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Zero Discharge Performance of an Industrial Pilot-Scale Plant Treating Palm Oil Mill Effluent

Directory of Open Access Journals (Sweden)

Jin Wang

2015-01-01

Full Text Available Palm oil is one of the most important agroindustries in Malaysia. Huge quantities of palm oil mill effluent (POME pose a great threat to aqueous environment due to its very high COD. To make full use of discharged wastes, the integrated “zero discharge” pilot-scale industrial plant comprising “pretreatment-anaerobic and aerobic process-membrane separation” was continuously operated for 1 year. After pretreatment in the oil separator tank, 55.6% of waste oil in raw POME could be recovered and sold and anaerobically digested through 2 AnaEG reactors followed by a dissolved air flotation (DAF; average COD reduced to about 3587 mg/L, and biogas production was 27.65 times POME injection which was used to generate electricity. The aerobic effluent was settled for 3 h or/and treated in MBR which could remove BOD3 (30°C to less than 20 mg/L as required by Department of Environment of Malaysia. After filtration by UF and RO membrane, all organic compounds and most of the salts were removed; RO permeate could be reused as the boiler feed water. RO concentrate combined with anaerobic surplus sludge could be used as biofertilizer.

Zero Discharge Performance of an Industrial Pilot-Scale Plant Treating Palm Oil Mill Effluent

Science.gov (United States)

Mahmood, Qaisar; Qiu, Jiang-Ping; Li, Yin-Sheng; Chang, Yoon-Seong; Chi, Li-Na; Li, Xu-Dong

2015-01-01

Palm oil is one of the most important agroindustries in Malaysia. Huge quantities of palm oil mill effluent (POME) pose a great threat to aqueous environment due to its very high COD. To make full use of discharged wastes, the integrated “zero discharge” pilot-scale industrial plant comprising “pretreatment-anaerobic and aerobic process-membrane separation” was continuously operated for 1 year. After pretreatment in the oil separator tank, 55.6% of waste oil in raw POME could be recovered and sold and anaerobically digested through 2 AnaEG reactors followed by a dissolved air flotation (DAF); average COD reduced to about 3587 mg/L, and biogas production was 27.65 times POME injection which was used to generate electricity. The aerobic effluent was settled for 3 h or/and treated in MBR which could remove BOD3 (30°C) to less than 20 mg/L as required by Department of Environment of Malaysia. After filtration by UF and RO membrane, all organic compounds and most of the salts were removed; RO permeate could be reused as the boiler feed water. RO concentrate combined with anaerobic surplus sludge could be used as biofertilizer. PMID:25685798

A mathematical model for environmental risk assessment in manufacturing industry

Institute of Scientific and Technical Information of China (English)

何莉萍; 徐盛明; 陈大川; 党创寅

2002-01-01

Environmental conscious manufacturing has become an important issue in industry because of market pressure and environmental regulations. An environmental risk assessment model was developed based on the network analytic method and fuzzy set theory. The "interval analysis method" was applied to deal with the on-site monitoring data as basic information for assessment. In addition, the fuzzy set theory was employed to allow uncertain, interactive and dynamic information to be effectively incorporated into the environmental risk assessment. This model is a simple, practical and effective tool for evaluating the environmental risk of manufacturing industry and for analyzing the relative impacts of emission wastes, which are hazardous to both human and ecosystem health. Furthermore, the model is considered useful for design engineers and decision-maker to design and select processes when the costs, environmental impacts and performances of a product are taken into consideration.

Health Risk Assessment of Harmful Chemicals: Case Study in a Petrochemical Industry

Directory of Open Access Journals (Sweden)

M. Motovagheh

2011-01-01

Full Text Available Background and aims In the most chemical process industries, workers are exposed to various chemicals and working with these chemicals without considering safety and health considerations can lead to different harmful symptoms. For deciding about control measures and reducing risk to acceptable level , it is necessary to assess the health risk of exposing to harmful chemicals by aid of specific risk assessment techniques in the process industries. The purpose of this study was to assess the health risks arising from the exposures to chemicals in a petrochemical industry.  methods A simple and applied method was used for health risk assessment of chemicals in a petrochemical industry. Firstly job tasks and work process were determined and then different chemicals in each tasks identified and risk ranking was calculated in each job task by aid of hazard and exposure rate.   Results The result showed that workers are exposed to 10 chemicals including Methyl ethyl ketone, Epichlorohydrin, Sulfuric acid, Phenol, Chlorobenzene, Toluene, Isopropanol, Methylene chloride, Chlorideric Acid and Acetone during their work in plant. From these chemicals, the highest risk level was for Epichlorohydrin in the jobs of tank and utility operations and maintenance workers. The next high risk level was for Epichlorohydrin in technical inspecting and Methyl ethyl ketone in Tank and utility operations operator.     Conclusion Hazard information and monitoring data of chemical agents in the chemical industries can be used for assessing health risks from exposures to chemicals and ranking jobs by their risk level. These data can be used for resource allocation for control measures and reducing risk level to acceptable level.    

Treatment of wastewater from rubber industry in Malaysia ...

African Journals Online (AJOL)

Treatment of wastewater from rubber industry in Malaysia. ... Discharge of untreated rubber effluent to waterways resulted in water pollution that affected the human health. ... Key words: Rubber industry, effluent, waste management, Malaysia.

Life-Cycle environmental impact assessment of mineral industries

Science.gov (United States)

Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

2018-05-01

Mining is the extraction and processing of valuable ferro and non-ferro metals and minerals to be further used in manufacturing industries. Valuable metals and minerals are extracted from the geological deposits and ores deep in the surface through complex manufacturing technologies. The extraction and processing of mining industries involve particle emission to air or water, toxicity to the environment, contamination of water resources, ozone layer depletion and most importantly decay of human health. Despite all these negative impacts towards sustainability, mining industries are working throughout the world to facilitate the employment sector, economy and technological growth. The five most important miners in the world are South Africa, Russia, Australia, Ukraine, Guinea. The mining industries contributes to their GDP significantly. However, the most important issue is making the mining world sustainable thus reducing the emissions. To address the environmental impacts caused by the mining sectors, this paper is going to analyse the environmental impacts caused by the 5 major minerals extraction processes, which are bauxite, ilmenite, iron ore, rutile and uranium by using the life-cycle impact assessment technologies. The analysis is done here using SimaPro software version 8.4 using ReCipe, CML and Australian indicator method.

Mask industry quality assessment

Science.gov (United States)

Strott, Al; Bassist, Larry

1994-12-01

Product quality and timely delivery are two of the most important parameters in determining the success of a mask manufacturing facility. Because of the sensitivity of this data, very little was known about industry performance in these areas until an assessment was authored and presented at the 1993 BACUS Symposium by Larry Regis of Intel Corporation, Neil Paulsen of Intel Corporation, and James A. Reynolds of Reynolds Consulting. This data has been updated and will be published and presented at this year's BACUS Symposium. Contributor identities will again remain protected by utilizing Arthur Andersen & Company to compile the submittals. Participation was consistent with last year's representation of over 75% of the total merchant and captive mask volume in the United States. The data compiled includes shipments, customer return rate, customer return reasons from 1988 through Q2, 1994, performance to schedule, plate survival yield, and throughput time (TPT).

Guidelines for integrated risk assessment and management in large industrial areas. Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems

International Nuclear Information System (INIS)

1998-01-01

The IAEA, the United Nations Environment Programme (UNEP) within the framework of the Awareness and Preparedness for Emergencies at Local Level (APELL), the United Nations Industrial Development Organization (UNIDO) and the World Health Organization (WHO) decided in 1986 to join forces in order to promote the use of integrated area wide approaches to risk management. An Inter-Agency Programme, which brings together expertise in health the environment, industry and energy, all vital for effective risk management, was established. The Inter-Agency Programme on the assessment and Management of Health and Environmental Risks from Energy and Other Complex Industrial Systems aims at promoting and facilitating the implementation of integrated risk assessment and management for large industrial areas. This initiative includes the compilation of procedures and methods for environmental and public health risk assessment, the transfer of knowledge and experience amongst countries in the application of these procedures and the implementation of an integrated approach to risk management. The purpose of the Inter-Agency Programme is to develop a broad approach to the identification, prioritization and minimization of industrial hazards in a given geographical area. The UN organizations sponsoring this programme have been involved for several years in activities aimed at assessment and management of environmental and health risks, prevention of major accidents and emergency preparedness. These Guidelines have been developed on the basis of experience from these activities to assist in the planning and conduct of regional risk management projects. They provide a reference framework for the undertaking of integrated health and environmental risk assessment for large industrial areas and for the formulation of appropriate risk management strategies

Guidelines for integrated risk assessment and management in large industrial areas. Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-01

The IAEA, the United Nations Environment Programme (UNEP) within the framework of the Awareness and Preparedness for Emergencies at Local Level (APELL), the United Nations Industrial Development Organization (UNIDO) and the World Health Organization (WHO) decided in 1986 to join forces in order to promote the use of integrated area wide approaches to risk management. An Inter-Agency Programme, which brings together expertise in health the environment, industry and energy, all vital for effective risk management, was established. The Inter-Agency Programme on the assessment and Management of Health and Environmental Risks from Energy and Other Complex Industrial Systems aims at promoting and facilitating the implementation of integrated risk assessment and management for large industrial areas. This initiative includes the compilation of procedures and methods for environmental and public health risk assessment, the transfer of knowledge and experience amongst countries in the application of these procedures and the implementation of an integrated approach to risk management. The purpose of the Inter-Agency Programme is to develop a broad approach to the identification, prioritization and minimization of industrial hazards in a given geographical area. The UN organizations sponsoring this programme have been involved for several years in activities aimed at assessment and management of environmental and health risks, prevention of major accidents and emergency preparedness. These Guidelines have been developed on the basis of experience from these activities to assist in the planning and conduct of regional risk management projects. They provide a reference framework for the undertaking of integrated health and environmental risk assessment for large industrial areas and for the formulation of appropriate risk management strategies. Refs, figs, tabs.

Protecting air basins from harmful discharges

Energy Technology Data Exchange (ETDEWEB)

Yankovskiy, S S

1983-01-01

The work is a brief description of the content of the reports delivered at the seminar entitled Protecting the Air Basin from Harmful Discharges of the Machine Building Enterprises, which took place at the All Union Exhibit of the Achievements of the National Economy of the USSR (VDNKh) in 1982. Representatives of different ministries and agencies, scientific research institutes (NII), planning and design and other specialized organizations, institutes of higher learning (vuz) and enterprises from different branches of industry took part in the work of the seminar. The seminar noted measures to eliminate deficiencies which occur in individual enterprises of the branch and measures to improve the work to improve protection of the air basin from harmful discharges of machine building enterprises.

Environmental efficiency analysis of power industry in China based on an entropy SBM model

International Nuclear Information System (INIS)

Zhou, Yan; Xing, Xinpeng; Fang, Kuangnan; Liang, Dapeng; Xu, Chunlin

2013-01-01

In order to assess the environmental efficiency of power industry in China, this paper first proposes a new non-radial DEA approach by integrating the entropy weight and the SBM model. This will improve the assessment reliability and reasonableness. Using the model, this study then evaluates the environmental efficiency of the Chinese power industry at the provincial level during 2005–2010. The results show a marked difference in environmental efficiency of the power industry among Chinese provinces. Although the annual, average, environmental efficiency level fluctuates, there is an increasing trend. The Tobit regression analysis reveals the innovation ability of enterprises, the proportion of electricity generated by coal-fired plants and the generation capacity have a significantly positive effect on environmental efficiency. However the waste fees levied on waste discharge and investment in industrial pollutant treatment are negatively associated with environmental efficiency. - Highlights: ► We assess the environmental efficiency of power industry in China by E-SBM model. ► Environmental efficiency of power industry is different among provinces. ► Efficiency stays at a higher level in the eastern and the western area. ► Proportion of coal-fired plants has a positive effect on the efficiency. ► Waste fees and the investment have a negative effect on the efficiency

Advanced korean industrial safety and health policy with risk assessment.

Science.gov (United States)

Kwon, Hyuckmyun; Cho, Jae Hyun; Moon, Il; Choi, Jaewook; Park, Dooyong; Lee, Youngsoon

2010-09-01

This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm-shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers' compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012) and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

Progress of environmental management and risk assessment of industrial chemicals in China

International Nuclear Information System (INIS)

Wang Hong; Yan Zhenguang; Li Hong; Yang Niyun; Leung, Kenneth M.Y.; Wang Yizhe; Yu Ruozhen; Zhang Lai; Wang Wanhua; Jiao Congying

2012-01-01

With China’s rapid economic growth, chemical-related environmental issues have become increasingly prominent, and the environmental management of chemicals has garnered increased attention from the government. This review focuses on the current situation and the application of risk assessment in China’s environmental management of industrial chemicals. The related challenges and research needs of the country are also discussed. The Chinese government promulgated regulations for the import and export of toxic chemicals in 1994. Regulations for new chemical substances came into force in 2003, and were revised in 2010 based on the concept of risk management. In order to support the implementation of new regulations, Guidance for Risk Assessment of Chemicals is under development in an attempt to provide the concepts and techniques of risk assessment. With increasing concern and financial support from Chinese government, China is embarking on the fast track of research and development in environmental management of industrial chemicals. - This paper reviews the current situation of industrial chemical management in China, and discusses the application of risk assessment and further research needs in this field.

The Empirical Relationship between Mining Industry Development and Environmental Pollution in China

OpenAIRE

Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

2017-01-01

This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) che...

Training industry needs & Technology Industry needs

NARCIS (Netherlands)

Klemke, Roland; Kuula, Timo; Helin, Kaj; Wild, Fridolin

2017-01-01

This deliverable joins D1.1 (User Industry Needs) and D1.2 (Technology Industry Needs and Affordances) and reports on the outcomes of Tasks T1.1 (Training Industry Assessment) and T1.2 (Technology Industry Assessment). We merged the deliverables for the following reasons: For readability ease we

Application of dielectric surface barrier discharge for food storage

Directory of Open Access Journals (Sweden)

Yassine BELLEBNA

2015-12-01

Full Text Available Ozone (O3 is a powerful oxidizer and has much higher disinfection potential than chlorine and other disinfectants. Ozone finds its application mainly in water treatment and air purification Dielectric barrier discharge (DBD method has proved to be the best method to produce ozone. Dried air or oxygen is forced to pass through a 1-2 mm gap. The aim of this study was to show that disinfection system using ozone generated by dielectric barrier discharge (DBD is an effective alternative to be used in food industry and ensures a safe quality of air for optimum preservation of fruits and vegetables. The DBDs are specific kind of discharges because one (or sometimes both electrodes is covered by a dielectric material, thereby preventing the discharge to move towards electrical breakdown. A succession of microdischarges occurs rapidly; their "lifetime" is in the range of a few nanoseconds. One of their most important applications is the production of ozone for air treatment, used mainly in the area of food industry, for extending the storage life of foods. After the achievement of a surface DBD reactor of cylindrical shape and its electrical characterization, it was then used as an ozone generator for air disinfection. Obtained results have shown that this reactor used as an ozone generator is effective for disinfection of air by removing viruses, bacteria and pathogens, causing the slowdown of the ripening process of fruits and vegetables.

Assessment of industry needs for oil shale research and development. Final report

Energy Technology Data Exchange (ETDEWEB)

Hackworth, J.H.

1987-05-01

Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry`s view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R&D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

RELAP5/MOD3 assessment for calculation of safety and relief valve discharge piping hydrodynamic loads

International Nuclear Information System (INIS)

Stubbe, E.J.; VanHoenacker, L.; Otero, R.

1994-02-01

This report presents an assessment study for the use of the code RELAP 5/MOD3/5M5 in the calculation of transient hydrodynamic loads on safety and relief discharge pipes. Its predecessor, RELAP 5/MOD1, was found adequate for this kind of calculations by EPRI. The hydrodynamic loads are very important for the discharge piping design because of the fast opening of the valves and the presence of liquid in the upstream loop seals. The code results are compared to experimental load measurements performed at the Combustion Engineering Laboratory in Windsor (US). Those measurements were part of the PWR Valve Test Program undertaken by EPRI after the TMI-2 accident. This particular kind of transients challenges the applicability of the following code models: two-phase choked discharge; interphase drag in conditions with large density gradients; heat transfer to metallic structures in fast changing conditions; two-phase flow at abrupt expansions. The code applicability to this kind of transients is investigated. Some sensitivity analyses to different code and model options are performed. Finally, the suitability of the code and some modeling guidelines are discussed

Protectionism and industrialization: a critical assessment of the Latin American industrialization period

Directory of Open Access Journals (Sweden)

Noemi Levy-Orlik

2009-12-01

Full Text Available Protectionist policies were considered one of the pivotal features of the import industrialization process in Latin America. In this paper the effects of protectionist policies are assessed in terms of the principal macroeconomic variables, productive structure and external trade composition; also, ECLAC's perspective on the import substitution process is discussed. The main conclusions are that regional protectionist policies were spontaneous, and their effects were limited due to the generalized protection that took place and the government's commitment to price stability.

Wastewater canal Vojlovica, industrial complex Pančevo, Serbia – preliminary ecotoxicological assessment of contaminated sediment

Directory of Open Access Journals (Sweden)

IVANA PLANOJEVIĆ

2011-03-01

Full Text Available Effluents collected from the industrial complex of Pančevo, Serbia (oil refinery, petrochemical plant, and fertilizer factory, are discharged into a wastewater canal entering the Danube River. In this study, which was focused on sediment assessment, a complex triad approach consisting of chemical analysis, sediment toxicity tests and macrozoobenthos community analysis was applied. In toxicity tests on sediment elutriates, the following responses were registered – stimulatory effect in algal bioassay, no effect in acute test with Daphnia magna, and low to moderate toxicity in the conventional Vibrio fischeri test. Moderate to high toxicities were recorded in solid phase tests on Myriophyllum aquaticum and V. fischeri. High content of Hg, certain PAHs and non-characterised sediment contaminants accumulated over years contribute not only to the registered toxicity, but also to the complete absence of macrozoobenthos. The obtained results proved that regularly measured conventional and priority pollutants are hardly ever the only toxic contaminants present in sediments. Toxicity tests, in particular the contact test, might guide towards a better selection of parameters to be regularly or occasionally monitored. In addition, complete sediment toxicity tests proved to be an appropriate method for assessing the bioavailability of the chemically detected contaminants. The analysis of the macrozoobenthos composition and structure as inevitable part of sediment risk assessment procedures integrates the effects of multiple stressors and gives a realistic insight into not only sediment contamination by toxic pollutants, but also the sediment status in general.

Superconducting energy stabilizer with charging and discharging DC-DC converters

International Nuclear Information System (INIS)

Kim, S.H.; Kostecki, E.L.; DeWinkel, C.C.

1992-01-01

This patent describes a superconducting energy stabilizer having multiple load connections and employing DC-DC conversion for storing energy in a superconducting inductive energy storage device having a first end and a second end, and for releasing the stored energy from the superconducting inductive energy storage device to a load or loads or to a utility or an industrial electrical distribution system, the superconducting energy stabilizer having multiple load connections and employing DC-DC conversion. It comprises: energy storage cell means for supplying energy to the load, discharging DC-DC converter means for releasing energy from the superconducting inductive energy storage device to the energy storage cell means, the discharging DC-DC converter means having input terminals, output terminals, and a discharging control line means for carrying signals controlling the operation of the discharging DC-DC converter means, one of the input terminals of the discharging DC-DC converter means coupled to the first end of the superconducting energy storage device

Industrial process system assessment: bridging process engineering and life cycle assessment through multiscale modeling.

Science.gov (United States)

The Industrial Process System Assessment (IPSA) methodology is a multiple step allocation approach for connecting information from the production line level up to the facility level and vice versa using a multiscale model of process systems. The allocation procedure assigns inpu...

Assessment of effluents discharged from textiles industries in ...

African Journals Online (AJOL)

user

mail: m.emigilati@futminna.edu.ng. Tel: +2347032950192. Author(s) agree that this article remain permanently open access under the terms of the Creative Commons Attribution License 4.0. International License ...

Bioaccumulation Study of Produced Water Discharges from Southeastern Brazilian Offshore Petroleum Industry Using Feral Fishes.

Science.gov (United States)

Lourenço, Rafael André; Francioni, Eleine; da Silva, Antonio Henrique M F T; Magalhães, Caio Augusto; Gallotta, Fabiana Dias Costa; de Oliveira, Fabio Francisco; de Souza, João Maximino; de Araújo, Leandro Franco Macena; de Araújo, Liliane Pequeno; de Araújo Júnior, Marcus Antonio G; de Fátima Guadalupe Meniconi, Maria; de Souza Bindes Gomes Lopes, Monica Aparecida Ferreira

2018-04-01

The main effluent of oil and gas production is the discharge of produced water (PW). Despite the potential environmental impact, the structure of oil and gas platforms can act as artificial reefs. Two species of fish, Caranx crysos and Tylosurus acus, were captured under two discharging platforms at Campos Basin, P19 and P40. A nondischarging platform, P25, was taken as reference. The highest median concentration of PAH in muscle tissue was observed for C. Crysos at P40 (219.38 ng g -1 ) followed by P19 (68.26 ng g -1 ). For T. acus, the highest median concentrations were 40.07 and 42.21 ng g -1 from P19 and P40 respectively. P25 presented the smallest recorded concentrations. The results of PAH in the muscle tissue of C. crysos enabled to distinguish the platforms with PW discharge from the platform without discharge. Trace elements concentrations reflected the background levels and were not influenced by the PW release.

Study and optimization of the partial discharges in capacitor model ...

African Journals Online (AJOL)

The initial potential as well as the temperature are known to influence the partial discharge ... The development of electrostatic industry has ... the liquid impregnation. One of the ..... the Surface of Corona charged Uniforms layers of HIPS.

Indexes of contamination for characterization of continental waters and discharges. Formulations

International Nuclear Information System (INIS)

Ramirez, Restrepo R; Cardenosa, M

1999-01-01

Contamination indexes (ICO) for characterization of natural water bodies and industrial discharges have been formulated in previous works by Ramirez, et al, 1997 in this work, complementary indexes not correlated with other ICOS previously developed are established thus resulting in a complementary tool to be applied in the interpretation and characterization on continental surface water bodies. First, a pH index (ICOpH) is obtained to determine ph incidence on water quality interpretation. A temperature index (ICOTEM) is also obtained to evaluate effluent incidence on receiving water bodies. ICOTEM is based on temperature difference of the wastewater discharge and the water body. Finally, indexes for the evaluation of aromatic and aliphatic hydrocarbons are also developed based on data collected on sediments and fish tissue samples. These hydrocarbon compounds are highly viable to accumulate and produce long-term detrimental effects on living organisms. These latter indexes have been developed based on data of nearly 130 samples collected during monitoring campaigns in streams and water bodies affected by discharges of the petroleum industry or by accidental spills of crude oil or hydrocarbon by-products in Colombian streams; its also possible that anthropic influence other than petroleum discharges might be affecting the streams included in the monitoring campaigns

Safety aspects of postanesthesia care unit discharge without motor function assessment after spinal anesthesia

DEFF Research Database (Denmark)

Aasvang, Eske Kvanner; Jørgensen, Christoffer Calov; Laursen, Mogens Berg

2017-01-01

Background: Postanesthesia care unit (PACU) discharge without observation of lower limb motor function after spinal anesthesia has been suggested to signifcantly reduce PACU stay and enhance resource optimization and early rehabilitation but without enough data to allow clinical recommendations...... or knee arthroplasty was noninferior to motor function assessment in achieving length of stay 4 days or less or 30-day readmissions. Because a nonsignifcant tendency toward increased adverse events during the frst 24h in the ward was discovered, further safety data are needed in patients without...

Global scope assessment: A novel method and its application to the Chinese paper industry

International Nuclear Information System (INIS)

Wang, X.W.; Hua, B.

2007-01-01

We strongly suggest an idea we call Global Scope Assessment (GSA) on the basis of popular Life Cycle Assessment and Environomics. It is used to justify the industry development pattern in a region (country) considering the specific regional resources conditions. In terms of GSA, the greatest synthetic benefit is expected while taking full advantage of regional comparative superiority and the worldwide distribution of related industry links. As an example, we choose Chinese paper industry to be the subject for application of GSA and the optimal industry links distribution among related countries is obtained. Our study indicates that the adjustment of industry structure should be a fair approach to relieve the pressure from environment and resources and to balance the contradiction between development and resources

Mother-infant interaction assessment at discharge and at 6 months in a French cohort of infants born very preterm: The OLIMPE study.

Directory of Open Access Journals (Sweden)

Gilles Cambonie

Full Text Available The principal aim was to investigate the feasibility of assessing mother-infant interactions at discharge and at 6 months infant corrected age in singletons born before 32 weeks of gestation. The secondary aims were to describe these interactions and their disorders, explore the association between maternal emotional state and the interactions, and assess the relationship between disordered interactions and infant social withdrawal behaviour.OLIMPE is an ancillary study of the population-based study EPIPAGE 2, which recruited preterm neonates in France in 2011. 163 dyads participated at discharge and 148 at 6 months. Interactions were observed with the Attachment During Stress (ADS scale, which includes two behavioural subscales, for the mother (m-ADS and her infant (i-ADS. Two professionals independently completed the ADS scales for one third of the observations. Maternal emotional state was assessed using self-administered questionnaires of depression, anxiety, and stress. Infant's social withdrawal behaviour at 6 months was measured by the Alarm Distress Baby scale.At discharge, 15.3% of the m-ADS scales and 43.3% of the i-ADS scales had at least one unobserved component. At 6 months, all items on both scales were noticeable in >90% of the dyads. Reliability, estimated by the kappa coefficient, ranged between 0.39 and 0.76 at discharge, and between 0.21 and 0.69 at 6 months. Disordered interactions were indicated on 48.6% of the m-ADS scales and 36.5% of the i-ADS scales at discharge. At 6 months, these rates were 32.6% and 26.0%. Disordered interactions at 6 months were associated with identified disorder at discharge. Insecure infant attachment was not influenced by maternal mental health but was strongly associated with infant social withdrawal behaviour.The ADS scale can be used to screen for early interaction disorders after premature birth and may help to target dyads that would most benefit from early intervention.

Assessment of technological solutions for removal of radium discharged to sea from offshore oil and gas installations

Energy Technology Data Exchange (ETDEWEB)

Eriksen, Dag Oeistein [Primus.inter.pares AS, Kongsberggata 20, NO-0468 Oslo (Norway); Hylland, Ketil [University of Oslo (Norway); Andersen, Knut Inge [Statoil ASA (Norway); Sidhu, Rajdeep Singh [Institute for Energy Technology - IFE (Norway)

2014-07-01

On the Norwegian sector of the North-Sea the oil- and gas-producing fields Troll B and C are the main contributors to radium discharged to the sea (190 GBq/a {sup 226}Ra and 150 GBq/a {sup 228}Ra). Thus, to observe effects caused by the emission of radioactivity and to consider remedial action one should focus on these two installations. Both installations are now operated by Statoil. In a previous comprehensive study of the speciation of discharged radium the conclusion was that it is impossible to detect any effect from radiation doses. The incremental doses due to the emissions were found to be in the nSv-range. The study covered precipitation by sulfate in the sea water, absorption on organic and inorganic materials, uptake in cod eggs and in juvenile cod, effect on sediment living organisms, background levels of pelagic fish and in sediments, and modeling of the distribution in the water column as well the distribution along the coastal stream. Despite the lack of radiation effects, an assessment of possible technological solution for removal of the radium has been undertaken. Such methods must meet the severe requirements imposed by the oil recovery process at Troll B and C: High produced water rates (>1000 m{sup 3}/h), high salinity and content of water soluble carboxylic acids originating from the crude oil, in addition to a relatively high content of barium (3 550 tonnes/a). For implementation on an offshore installation the footprint and weight of the equipment would have to be as low as possible. It is also imperative that the radiation doses to operators are as low as possible. This puts strict requirements on the shielding of the absorbents accumulating {sup 226}Ra and {sup 228}Ra. No commercially available methods were identified, but one new conceptual method based on absorption of radium on barite has been proposed. Barite is also a good shielding material. Tests performed at Institute for Energy Technology show, however, that the kinetics of the

A study of polluted eco-system around industrial areas

International Nuclear Information System (INIS)

Husaini, S.N.; Khan, E.U.; Qureshi, I.E.; Malik, F.; Zaidi, J.H.; Arif, M.; Fatima, I.; Arif, M.

2005-01-01

Industrial pollution is one of the most serious problems in Pakistan. The uncontrolled release of untreated industrial effluents to large water bodies has deleterious effects on water quality, aquatic life and human health. The concentration of heavy metals in eco-system is reaching at alarming levels and is increasing yearly. In reality, the industries are not equipped with proper effluent treatment plants. The environmental protection law is not strictly implemented to limit the release and/or proper disposal of industrial effluents. Therefore, volume of specified industrial discharge is growing at an exponential rate without any specific safeguards. Effective measures, which can eliminate or considerably reduce hazardous factors from the human environment to minimize the associated health risks, must be identified and eradicated. In order to achieve these objectives, the study has been done to reach a balanced assessment of the risks and benefits involved. For this purpose two industrial cities of Pakistan namely, Gujranwala and Faisalabad have been selected. Four major industries existing in these cities, namely Yam, textile, paper and board and ceramics, have been studied. The specimens of the irrigated soil exposed to the industrial effluent, crops and vegetables grown on that soil have been analyzed study the hazardous effects on human health. (author)

77 FR 26315 - U.S. Extractive Industries Transparency Initiative Stakeholder Assessment and Multi-Stakeholder...

Science.gov (United States)

2012-05-03

... DEPARTMENT OF THE INTERIOR [Docket No. ONRR-2012-0003] U.S. Extractive Industries Transparency... assessment as part of the U.S. Extractive Industries Transparency Initiative (USEITI) implementation process...' commitment to participate in the Extractive Industries Transparency Initiative. EITI is a signature...

The machines maintenance conditions assessment in the plastic industry

Directory of Open Access Journals (Sweden)

Stanisław Borkowski

2015-12-01

Full Text Available The purpose, methodology, main findings, the originality of the subject area (research, way of using. The main research analysis purpose is a presentation, an assessment and an interpretation of the research findings on the machines maintenance conditions in the plastic industry. The research analysis was carried out with applying Technology ABC method and TPM coefficients calculations connected with Techno pak machine components maintenance. The research was carried out in the chosen manufacturing enterprise of the plastic industry. Research findings interpretation results have been introduced in the analyzed enterprise in the form of the manufacturing processes improvement.

Assessing global resource utilization efficiency in the industrial sector.

Science.gov (United States)

Rosen, Marc A

2013-09-01

Designing efficient energy systems, which also meet economic, environmental and other objectives and constraints, is a significant challenge. In a world with finite natural resources and large energy demands, it is important to understand not just actual efficiencies, but also limits to efficiency, as the latter identify margins for efficiency improvement. Energy analysis alone is inadequate, e.g., it yields energy efficiencies that do not provide limits to efficiency. To obtain meaningful and useful efficiencies for energy systems, and to clarify losses, exergy analysis is a beneficial and useful tool. Here, the global industrial sector and industries within it are assessed by using energy and exergy methods. The objective is to improve the understanding of the efficiency of global resource use in the industrial sector and, with this information, to facilitate the development, prioritization and ultimate implementation of rational improvement options. Global energy and exergy flow diagrams for the industrial sector are developed and overall efficiencies for the global industrial sector evaluated as 51% based on energy and 30% based on exergy. Consequently, exergy analysis indicates a less efficient picture of energy use in the global industrial sector than does energy analysis. A larger margin for improvement exists from an exergy perspective, compared to the overly optimistic margin indicated by energy. Copyright © 2012 Elsevier B.V. All rights reserved.

Advanced Korean Industrial Safety and Health Policy with Risk Assessment

Directory of Open Access Journals (Sweden)

Hyuckmyun Kwon

2010-09-01

Full Text Available This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm- shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers’ compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012 and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

Implementation of the safety assessment in the practice of industrial radiography

International Nuclear Information System (INIS)

Alfonso Pallarés, C.; Pérez Reyes, Y.

2015-01-01

The CNSN as regulatory authority has regulatory control processes based on regulations, permits, inspections and limitation to ensure the supervision and control of the practice of industrial radiography. On the other hand in the light of the new regulations approved and being implemented such as: Resolution 334/2011 CITMA 'Regulation on Notification and authorization of practices and activities associated with the use of ionizing radiation sources' and Resolution 17 / 2012, Security Guide: Security Assessment Practices and Activities associated with the use of ionizing radiation (recommendatory), it is necessary for compliance with regulatory requirements concerning the safety assessment. Since 2009 it has been applied this experience in different medical practices and industry, providing a systematic and consistent basis, to the safety assessment of all facilities and activities, which has helped increase the confidence that has been achieved an adequate level of security. The work was able to identify that there is a group of barriers operating in the risk reduction in various accident sequences and therefore have a relative importance in risk reduction, recommendations in this regard to improve the program management of safety in the practice of industrial radiography. [es

STUDENTS’ COMMUNICATION SKILLS ASSESSMENT BY EXTERNAL LECTURERS AND INDUSTRY REPRESENTATIVES

Directory of Open Access Journals (Sweden)

NOORFAZILA KAMAL

2016-11-01

Full Text Available Soft skills, especially communication skills, are important skills which each graduate must possess. Accordingly, several courses and approaches have been carried out in universities to train students in communication skills. The skills are normally evaluated by course lecturers. However, assessments by a third party from outside the university are valuable so that the students’ ahievements may be weighed against external evaluators’ point of views. In the Department of Electrical, Electronic and Systems Engineering (DEESE, Universiti Kebangsaan Malaysia (UKM, communication skills assessment by external lecturers and industry representatives are performed on Hari Poster JKEES, where students present their final year project poster. There are two categories of evaluation, namely project and communication skills. The project evaluation covers content, result and impact, while communication skills evaluation covers poster layout and design, and delivery. This study only analyse the students’ communication skills achievement. The participants of this study consists of 109 final year students from two batches, of which 51 students are from year 2014 and the other 58 students from year 2015. The results show that for the year 2014 students, the mean mark given by external lecturers in layout and design category is 6.7, while the mean mark from industry evaluators is 6.5. For the 2015 batch, the mean mark in the layout and design category is 6.3 from external lecturers and 5.9 from industry evaluators. In the delivery category, the mean marks for the 2014 batch are 7.1 and 6.6 from external lecturers and industry evaluators, espectively. Meanwhile, for the 2015 batch, the mean marks by external lecturers and industry evaluators are 6.3 and 5.8, respectively. The results show that both external lecturers and industry representatives judged DEESE students’ communication skills to be good.

Particle-In-Cell Simulations of Asymmetric Dual Frequency Capacitive Discharge Physics

Science.gov (United States)

Wu, Alan; Lichtenberg, A. J.; Lieberman, M. A.; Verboncoeur, J. P.

2003-10-01

Dual frequency capacitive discharges are finding increasing use for etching in the microelectronics industry. In the ideal case, the high frequency power (typically 27.1-160 MHz) controls the plasma density and the low frequency power (typically 2-13.56 MHz) controls the ion energy. The electron power deposition and the dynamics of dual frequency rf sheaths are not well understood. We report on particle-in-cell computer simulations of an asymmetric dual frequency argon discharge. The simulations are performed in 1D (radial) geometry using the bounded electrostatic code XPDP1. Operating parameters are 27.1/2 MHz high/low frequencies, 10/13 cm inner/outer radii, 3-200 mTorr pressures, and 10^9-10^11 cm-3 densities. We determine the power deposition and sheath dynamics for the high frequency power alone, and with various added low frequency powers. We compare the simulation results to simple global models of dual frequency discharges. Support provided by Lam Research, NSF Grant ECS-0139956, California industries, and UC-SMART Contract SM99-10051.

77 FR 71194 - Draft Guidance for Industry: Preclinical Assessment of Investigational Cellular and Gene Therapy...

Science.gov (United States)

2012-11-29

...] Draft Guidance for Industry: Preclinical Assessment of Investigational Cellular and Gene Therapy... Industry: Preclinical Assessment of Investigational Cellular and Gene Therapy Products,'' dated November... Evaluation (CBER), Office of Cellular, Tissue, and Gene Therapies (OCTGT). The product areas covered by this...

Industry and government perspectives on First Nations' participation in the British Columbia environmental assessment process

International Nuclear Information System (INIS)

Booth, Annie L.; Skelton, Norm W.

2011-01-01

Research was conducted with West Moberly First Nations, Halfway First Nation and the Treaty 8 Tribal Association (located in northeastern British Columbia, Canada) on effective engagement in environmental assessment processes. As part of this research, we examined the perspectives of a subset of resource industry proponents and their consultants, as well as staff from the British Columbia Environmental Assessment Office on their experiences with the requirement to consult with Canada's indigenous peoples. Research into the perspectives of industry proponents and consultants is almost non-existent, yet industry and governments are key participants within environmental assessments. This research found that industry proponents were disenfranchised by the British Columbia environmental assessment process and its mechanisms for consulting with First Nations, and that they sought changes to that process. Their concerns and their implications are documented and some recommendations are offered for addressing those concerns. Understanding industry and government views on First Nations engagement could suggest not only potential improvements in EA processes that facilitate all parties but provide common grounds for mutually engaging to resolve challenges.

77 FR 58830 - State Program Requirements; Application To Administer Partial National Pollutant Discharge...

Science.gov (United States)

2012-09-24

.... ODAFF does not have jurisdiction over storm water discharges associated with industrial activity (as defined at 40 CFR 122.26(b)(14)) at facilities whose primary industrial activity is storage of grain, feed... regulated by ODAFF that only incidentally store grain, feed, seed, fertilizer, and agriculture chemicals to...

Environmental impact on nuclear industry and lessons therefrom for conventional industry

International Nuclear Information System (INIS)

Gupta, V.K.; Ganguly, A.K.

1978-01-01

All human endeavours to-date have resulted in short term and/or long term and sometimes, in irreversible impact on the environment. The awareness to protect the environment became obvious only when the deleterious effects started getting manifest and recognised. Nuclear power industry has approached the problem of keeping the environmental impact due to its operation within the acceptable limits in a systematic manner. The unique features of this approach are defining Maximum Acceptable Site Burden (MASB) at a given site for normal operation of the plant and also defining acceptable risk to the population around installations due to very low probable accident conditions in the installation. The study of the characteristics of the environment during the preoperational phase is undertaken to assess the recipient capacity of the environment and specify acceptable discharge levels of toxins. The impact of the operation of installation is evaluated throughout its life time so that corrective actions could be initiated before perceptible deleterious effects could assume unmanageable dimensions. This is done through well organised laboratories operating at the site of major nuclear installations. Some of the areas where these practices could be usefully adopted in the non-nuclear industries are pointed out. (author)

Predicting the environmental risks of radioactive discharges from Belgian nuclear power plants

International Nuclear Information System (INIS)

Vandenhove, H.; Sweeck, L.; Vives i Batlle, J.; Wannijn, J.; Van Hees, M.; Camps, J.; Olyslaegers, G.; Miliche, C.; Lance, B.

2013-01-01

An environmental risk assessment (ERA) was performed to evaluate the impact on non-human biota from liquid and atmospheric radioactive discharges by the Belgian Nuclear Power Plants (NPP) of Doel and Tihange. For both sites, characterisation of the source term and wildlife population around the NPPs was provided, whereupon the selection of reference organisms and the general approach taken for the environmental risk assessment was established. A deterministic risk assessment for aquatic and terrestrial ecosystems was performed using the ERICA assessment tool and applying the ERICA screening value of 10 μGy h −1 . The study was performed for the radioactive discharge limits and for the actual releases (maxima and averages over the period 1999–2008 or 2000–2009). It is concluded that the current discharge limits for the Belgian NPPs considered do not result in significant risks to the aquatic and terrestrial environment and that the actual discharges, which are a fraction of the release limits, are unlikely to harm the environment. -- Highlights: • Impact of radioactive discharges by the Belgian NPPs of Doel and Tihange on wildlife was evaluated. • Deterministic risk assessment for aquatic and terrestrial ecosystems performed with the ERICA tool. • NPP discharge limits do not result in significant risks to the aquatic and terrestrial environment. • Actual discharges, a fraction of the release limits, are unlikely to harm the environment

Assessment of the discharge regime and water budget of Belo Vrelo (source of the Tolišnica River, central Serbia

Directory of Open Access Journals (Sweden)

Čokorilo-Ilić Marina

2014-01-01

Full Text Available A sufficiently long spring discharge regime monitoring data set allows for a large number of analyses, to better understand the process of transformation of precipitation into a discharge hydrograph. It is also possible to determine dynamic groundwater volumes in a karst spring catchment area, the water budget equation parameters and the like. It should be noted that a sufficiently long data set is deemed to be a continuous spring discharge time series of more than 30 years. Such time series are rare in Serbia. They are generally much shorter (less than 15 years, and the respective catchment areas therefore fall into the “ungauged” category. In order to extend existing karst spring discharge time series, we developed a model whose outputs, apart from mean monthly spring discharges, include daily real evapotranspiration rates, catchment size and dynamic volume variation during the analytical period. So far the model has solely been used to assess the discharge regime and water budget of karst springs. The present paper aims to demonstrate that the model also yields good results in the case of springs that drain aquifers developed in marbles. Belo Vrelo (“White Spring”, source of the Tolišnica River, which drains marbles and marbleized limestones and dolomites of Čemerno Mountain, was selected for the present case study. [OI-176022

Environmental impact assessment of some aspects of an alcohol distillery industry

International Nuclear Information System (INIS)

Khanum, F.; Khan, M.A.

2005-01-01

The paper on Environmental Impact Assessment of an Alcohol Distillery was carried to assess the type of impacts that could be produced by an alcohol industry on the environment and economics of the selected area. Baseline studies were done for project location and boundaries, physiography, soil profile, climate, water resources, ecological resources, air quality, noise level, archeological resources and socio- economic impacts. Checklist was prepared for identification of possible Environmental Impacts of the project, at constructional and operational levels and was marked as no significant impact, small impact, moderate impact and major impact. From various available data it was observed that Sargodha district is an arid area and Alcohol distillery considered as best for using the sugar industrial raw materials i.e., molasses. The observations showed that before installation of alcohol industry there was no hazardous air emissions and noise problems. By discussing the checklist it was concluded that proposed project would not result in any significant damage to the community or the environment if the recommended mitigation measures are adopted. So in that way we develop a sustainable industrial sector by doing EIA and implementing it. (author)

Radioactive discharges from Sellafield (UK)

International Nuclear Information System (INIS)

Pentreath, R.J.

1985-01-01

This study of low-level liquid radioactive discharges from the British Nuclear Fuels Ltd Sellafield site into the eastern basin of the Irish Sea, prepared on the basis of existing publications and documents, reviews chemical forms and rate of discharges, physical oceanography, sediment distribution and fisheries of the Irish Sea, behaviour of radionuclides in seawater, association with sedimentary materials, accumulation of radionuclides by biological materials, environmental monitoring, surveillance and assessment of radiation exposure of the public and impact on the environment

Industrial assessment center program. Final Report

International Nuclear Information System (INIS)

Ahmad R. Ganji, Ph.D., P.E., IAC DIrector

2007-01-01

The Industrial Assessment Center (IAC) at San Francisco State University (SFSU) has served the cause of energy efficiency as a whole, and in particular for small and medium-sized manufacturing facilities in northern and central California, within a approximately 150 miles (radial) of San Francisco since 1992. In the current reporting period (September 1, 2002 through November 31, 2006) we have had major accomplishments, which include but are not limited to: Performing a total of 94 energy efficiency and waste minimization audit days of 87 industrial plants; Recommending and analysis of 809 energy efficiency measures; Training 22 energy engineers, most of whom have joined energy services companies in California; Disseminating energy efficiency information among local manufacturers; Acting as an information source for energy efficiency for local manufacturers and utilizes; Cooperating with local utilities and California Energy Commission in their energy efficiency projects; Performing various assignments by DOE such as dissemination of information on SEN initiative, conducting workshops on energy efficiency issues, contacting large energy user plants--Establishing a course on 'Energy: Resources, Alternatives and Conservation' as a general education course at SFSU; Bringing energy issues to the attention of students in classrooms

Assessment of Industrial Exposure to Magnetic Fields (invited paper)

International Nuclear Information System (INIS)

Chadwick, P.

1999-01-01

Magnetic field strengths produced by industrial processes can be very large, but they often exhibit a marked spatial variation. Whilst there may be the potential for exposures of workers to be high, actual exposure will be determined to a great extent by working practices. Possible metrics for epidemiological studies might be based on the temporal variability of exposure as well as maximum operator exposure or time-weighted average exposure and, whilst it might be possible to estimate these quantities from spot magnetic field strength measurements and observed working practices, this might be very difficult to achieve in practice. An alternative would be the use of a logging dosemeter: this paper describes some of the results of exposure assessments carried out in industrial environments with a modified EMDEX II magnetic field dosemeter. Magnetic fields in industrial environments often have waveforms which are not purely sinusoidal. Distortion can be introduced by the magnetic saturation of transformer and motor cores, by rectification, by poor matching between oscillator circuits and loads and when thyristors are used to control power. The resulting repetitive but non-sinusoidal magnetic field waveforms can be recorded and analysed; the spectral data may be incorporated into possible exposure metrics. It is also important to ensure that measurement instrumentation is responding appropriately in a non-sinusoidal field and this can only be done if the spectral content of the field is characterised fully. Some non-sinusoidal magnetic field waveforms cannot be expressed as a harmonic series. Specialist instrumentation and techniques are needed to assess exposure to such fields. Examples of approaches to the assessment of exposure to repetitive and non-repetitive magnetic fields are also discussed. (author)

An Assessment of Factors influencing Hospital Discharges Against ...

African Journals Online (AJOL)

Fifty-three (79.1 per cent) children were admitted without a formal referral letter and 51 (76.2 per cent) children were discharged within two weeks of admission while 45 (67.2 per cent) children belonged to the lower social classes. It is concluded that parental low social class, poor financial support and unpreparedness for ...

An Assessment of Physicochemical Parameters of Selected Industrial Effluents in Nepal

Directory of Open Access Journals (Sweden)

Abhinay Man Shrestha

2017-01-01

Full Text Available It is a well-known fact that the effluents released from the industries and environmental degradation go hand in hand. With the ongoing global industrialization this problem has been further aggravated. As such, Nepal is no exception. Hundreds of industries are being registered in the country annually which inevitably brings the issues regarding environmental pollution. This study has been conducted with samples of wastewater from 5 different industrial sites in 4 districts of Nepal, namely, Makwanpur, Sunsari, Morang, and Kathmandu, among which two were Waste Water Treatment Plants which treated the combined effluents collected from various sources. The other three sites were from wires and cables industry, paint manufacturing industry, and plastic cutting industry. The physicochemical parameters analysed were pH, temperature, conductivity, turbidity, and Cu, Cr, SO42-, and PO43- levels. Possible onsite measurements were recorded using portable, handheld devices whereas other parameters were assessed in the laboratory. The observed parameter levels in the collected samples were compared against the available Nepal national standards for industrial effluents and in the absence of standards for industrial effluents, with other relevant standard levels. Most of the parameters analysed were within the permissible limits with the exception of pH and Cr levels in some sites.

Improvements to methods for assisted discharge of coal and ash from storage

Energy Technology Data Exchange (ETDEWEB)

Armstrong, B.; Richards, D.G. [CRE Group Ltd., Stoke Orchard (United Kingdom)

1999-03-01

The project studied the effects of vibration on coal in storage and assessed the effect of changes in vibration parameters, with respect to changes in physical properties of coal, to the flow of material through the storage system. An effective technique was developed for the measurement of transmission of vibration through coal residing in storage vessels, at a variety of scales ranging from laboratory scale to large industrial plant. Significant parameters affecting vibration transmission were impact position (discharge was favoured by application near the outlet), and bulk density of the stored material. Use was made of computer-based discrete element modelling (DEM) techniques for studying vibrations. 27 refs., 62 figs., 13 tabs., 1 app.

Economical solution for the industrial waste problem of Karachi industrial area

International Nuclear Information System (INIS)

Mubin, S.

2005-01-01

The increased rate of industrialization coupled with rapid urbanization in Pakistan has given rise to serious water pollution and environmental problems. A vast range of industries has been established in the country during the last twenty five years, including tanneries, fertilizers, textiles, refineries, chemicals, vegetable oils, paper am pulp, sugar and food. Little attention was paid towards a large scale release of wastewater from these industries. Presently wastewater produced from these industries has been considered a serious problem and research in being conducted to solve its associated problems. Recently, it has been realized that there is a significant threat of water borne diseases, degradation of fresh water quality, environmental depletion and soil deterioration from the effluent and toxic emission of industries. Being a developing country and having limited resources, it is hard to install treatment plants on the industrial effluent with every industry before discharging them into streams which are also creating disturbance in natural ecosystem. An effort has been made to solve wastewater problem by implementing statistical tools on data of Karachi industrial state, obtained from EPA JICA and PCRWR, Islamabad. (author)

Strategies for implementing zero discharge in an industrial smelter : 1. Managing fluroide in groundwater

Science.gov (United States)

Stagnitti, F.; Salzman, S.; Thwaites, L.; Allinson, G.; Le Blanc, M.; Hill, J.; Doerr, S.; de Rooij, G.

2003-04-01

The Portland Aluminium smelter produces approximately 75 ML of process wastewater each year. This is combined with storm water runoff from the site to give an annual production of 715 ML. In common with many other smelters, this wastewater stream is currently discharged to the ocean. However, although the quality of the water Portland Aluminium discharges currently meets all Australian Environmental Protection Agency license requirements, this mode of release is unlikely to be acceptable in the near future, and alternative disposal options for the water are required. The Portland smelter has developed strategies which will enable it to achieve zero-discharge within 5 years. These strategies include separating process water from storm water, recycling storm water, construction of evaporation ponds to receive process water, irrigation of process water and storm water on lands within the site and maintenance of important wetland functions. The poster presents a summary of the management strategies currently being trialed and in particular focuses on modeling the spatial and temporal variations of fluoride found in the shallow groundwater and the implications of achieving zero-discharge. The poster also discusses the possible impacts on the distribution of fluoride and other solutes in the vadose zone by the irrigation of treated process water on blue-gum plantations. Computer simulations indicate that irrigation of process water (either treated or untreated) on the land poses no significant long-term threat to regional or surficial groundwater. However the impacts of increased solute transport through the vadose zone on changes in soil structure and nutrition require further investigation.

Investment risk analysis of China's wind power industry based on pre-assessment matrix

Institute of Scientific and Technical Information of China (English)

Yang Yong; Jiang Dongmei; Geng Jie; Fan Hua; Zhang Fashu

2009-01-01

Wind energy is a clean and sustainable energy, and wind power does not rely on fossil fuels.So there is no fuel price risk, and it, of course, does not include the environmental costs, such as carbon emissions.Because of these unique advantages, wind power has gradually become an important part of the strategy of sustainable development in China.Now with the growing voices on global greenhouse gas emission reduction, and as a clean and efficient energy,wind power has huge potential in combating climate change, energy security pressures and the needs for energy Wind power in China began to develop from the 1980s.In the first 20 years, the speed of development was slow;but since 2004, it has had an extremely rapid growth.This paper, in order to study the development mechanism of China's wind power industry, investigated and analyzed the status quo of wind power industry in China, and then found that(1)the development trend of wind power industry in China appears exponential growth:(2) China's installed capactiy of wind power is still smaller than that os some other countries;(3) new subsidy policies bring developing opportunities to wind power industry in China;(4) the sectors of wind power industry are in unbalanced growing;(5) the owners of proposed wind farms are too optimistic though the built wind farm had many problems.In addition, by using the methodology of Game Theory, this paper has also constructed the matrix of pre-assessing risks of China's wind power industry to further discuss the potential risk fuctors within China's wind power industry as risk factors of wind farm construction, risk factors of production of wind turbines, risk factors of parts and components manufacturing industry under risk indicators like R&D, patents, the domestic policy, the international policy, the quality of products and the market regulation, in order to provide a scientific assessment and self-assessment tool for investors or implementers and also to promote the further

Best practices in energy management: Experience with IAC assessments in the metals fabrication industry

International Nuclear Information System (INIS)

Clark, W.J.; Birkmire, L.K.

1999-01-01

The Industrial Technology and Energy Management (ITEM) division of the University City Science Center played a managerial role in founding and establishing the Energy Analysis and Diagnostic Center (EADC) program, now known as the Industrial Assessment Center (IAC) program. ITEM is responsible for the field management of 15 IACs in the western US. This DOE funded program utilizes teams of engineering faculty and students to conduct assessments of small to medium-size plants to identify cost savings by conserving energy, minimizing waste, and improving productivity. These assessments are provided at no direct cost to participating manufacturers, who are under no obligation to act on any recommendations. Centers managed by ITEM have conducted assessments in more than 700 plants in the metals fabrication industry (SIC 34). Recommendations made have the potential to reduce energy costs by about 10% on average. The average metals fabrication plant served achieved a 5.7% reduction in annual energy costs. These cost savings are accompanied by a reduction in energy usage of about 1.2 x 10 12 Btu/yr. Another benefit of the program is that it provides hands-on industrial experience and energy efficiency training for engineering students who will take these skills into industry. Since the program began more than 20 years ago, IACs have served less than 2% of the plants in this industry. To provide an effective means for plant managers to access and utilize the knowledge gained over the years ITEM has summarized recommendations that identify specific actions that plant management can take to save money

Energy Efficiency Practices: Assessment of Ohrid Hotel Industry

OpenAIRE

Petrevska, Biljana; Cingoski, Vlatko

2016-01-01

This paper provides information on the extent how the hotel industry in Ohrid meets the energy efficiency practices in terms of the current level of involvement. By undertaking an online survey in three, four and five-star hotels, the study assesses the attitudes and willingness of hotel managers concerning applying energy efficiency and environmental protection concepts and practices. Moreover, it investigates various determinants of energy consumption, like: solid waste management, resource...

Liquid discharges from the Ringhals and Barsebaeck nuclear power plants. Report to the OSPAR commission in accordance with PARCOM recommendation 91/4 on radioactive discharges

International Nuclear Information System (INIS)

2000-05-01

With regard to the general objectives of the Convention for the Protection of the Marine Environment of the North-East Atlantic (OSPAR Convention), the contracting parties have agreed, as stated in PARCOM Recommendation 91/4 on Radioactive Discharges, to apply best available technique (BAT) to reduce radioactive releases from the nuclear industry. Progress in implementing BAT shall be reported to the OSPAR Commission every four years. This report contains the Swedish submission for the third round of implementation reporting according to PARCOM Recommendation 91/4. The data provided are relevant to the Ringhals NPP which discharge into Convention waters, and the Barsebaeck NPP which discharge into waters close to the Convention area. The report was submitted to the Commission in December 1999

Liquid discharges from the Ringhals and Barsebaeck nuclear power plants. Report to the OSPAR commission in accordance with PARCOM recommendation 91/4 on radioactive discharges

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

With regard to the general objectives of the Convention for the Protection of the Marine Environment of the North-East Atlantic (OSPAR Convention), the contracting parties have agreed, as stated in PARCOM Recommendation 91/4 on Radioactive Discharges, to apply best available technique (BAT) to reduce radioactive releases from the nuclear industry. Progress in implementing BAT shall be reported to the OSPAR Commission every four years. This report contains the Swedish submission for the third round of implementation reporting according to PARCOM Recommendation 91/4. The data provided are relevant to the Ringhals NPP which discharge into Convention waters, and the Barsebaeck NPP which discharge into waters close to the Convention area. The report was submitted to the Commission in December 1999.

Requirements for water assessment tools: An automotive industry perspective

Directory of Open Access Journals (Sweden)

Sherry A. Mueller

2015-03-01

Full Text Available Water availability is one of the greatest global sustainability challenges. Water is not available in adequate quantity and quality in many areas and water shortfalls are expected to increase. Businesses are facing water-related challenges due to inadequate water availability and poor resource management. Identifying and quantifying impacts is key to enabling companies to make effective management decisions. Several water assessment tools have been developed to help companies understand the complex nature of water challenges; however, there remain significant gaps in the datasets and inconsistencies in measurement and reporting of geographic water shortfalls. There is a need for more complete datasets containing information on water withdrawal and discharge, freshwater availability and depletion (spatially and temporally, water quality monitoring, reuse and recycling. We discuss four of the available water assessment tools (Global Water Tool, India Water Tool, Water Risk Filter and Aqueduct and highlight those elements most critical to water-related business decisions.

Hydrogen Peroxide and Ozone Formation in Hybrid Gas-Liquid Electrical Discharge Reactors

Czech Academy of Sciences Publication Activity Database

Lukeš, Petr; Appleton, A. T.; Locke, B. R.

2004-01-01

Roč. 40, č. 1 (2004), s. 60-67 ISSN 0093-9994. [IEEE Industry Applications Society Annual Meeting 2002/37th./. Pittsburgh, Pennsylvania , 13.10.2002-18.10.2002] R&D Projects: GA ČR GA202/02/1026; GA MŠk ME 472 Grant - others:NSF(US) INT0086351 Keywords : hydrogen peroxide, ozone, corona discharge, water treatment, hybrid reactor Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.987, year: 2004

Phthalates and alkylphenols in industrial and domestic effluents: case of Paris conurbation (France).

Science.gov (United States)

Bergé, A; Gasperi, J; Rocher, V; Gras, L; Coursimault, A; Moilleron, R

2014-08-01

Phthalates and alkylphenols are toxics classified as endocrine disrupting compounds (EDCs). They are of particular concern due to their ubiquity and generally higher levels found in the environment comparatively to other EDCs. Industrial and domestic discharges might affect the quality of receiving waters by discharging organic matter and contaminants through treated waters and combined sewer overflows. Historically, industrial discharges are often considered as the principal vector of pollution in urban areas. If this observation was true in the past for some contaminants, no current data are today available to compare the quality of industrial and domestic discharges as regards EDCs. In this context, a total of 45 domestic samples as well as 101 industrial samples were collected from different sites, including 14 residential and 33 industrial facilities. This study focuses more specifically on 4 phthalates and 2 alkylphenols, among the most commonly studied congeners. A particular attention was also given to routine wastewater quality parameters. For most substances, wastewaters from the different sites were heavily contaminated; they display concentrations up to 1200 μg/l for di-(2-ethylhexyl) phthalate and between 10 and 100 μg/l for diethyl phthalate and nonylphenol. Overall, for the majority of compounds, the industrial contribution to the flux of contaminant reaching the wastewater treatment plants ranges between 1 and 3%. The data generated during this work constitutes one of the first studies conducted in Europe on industrial fluxes for a variety of sectors of activity. The study of the wastewater contribution was used to better predict the industrial and domestic contributions at the scale of a huge conurbation heavily urbanized but with a weak industrial cover, illustrated by Paris. Our results indicate that specific investigations on domestic discharges are necessary in order to reduce the release of phthalates and alkylphenols in the sewer systems

Pancreatitis - discharge

Science.gov (United States)

Chronic pancreatitis - discharge; Pancreatitis - chronic - discharge; Pancreatic insufficiency - discharge; Acute pancreatitis - discharge ... You were in the hospital because you have pancreatitis. This is a swelling of the pancreas. You ...

Flow cytometric assessment of microbial abundance in the near-field area of seawater reverse osmosis concentrate discharge

KAUST Repository

Van Der Merwe, Riaan

2014-06-01

The discharge of concentrate and other process waters from seawater reverse osmosis (SWRO) plant operations into the marine environment may adversely affect water quality in the near-field area surrounding the outfall. The main concerns are the increase in salt concentration in receiving waters, which results in a density increase and potential water stratification near the outfall, and possible increases in turbidity, e.g., due to the discharge of filter backwash waters. Changes in ambient water quality may affect microbial abundance in the area, for example by hindering the photosynthesis process or disrupting biogenesis. It is widely accepted that marine biodiversity is lower in more extreme conditions, such as high salinity environments. As aquatic microbial communities respond very rapidly to changes in their environment, they can be used as indicators for monitoring ambient water quality. The objective of this study was to assess possible changes in microbial abundance as a result of concentrate discharge into the near-field area (<. 25. m) surrounding the outfall of the King Abdullah University of Science and Technology (KAUST) SWRO plant. Flow cytometric (FCM) analysis was conducted in order to rapidly determine microbial abundance on a single-cell level in 107 samples, taken by diving, from the discharge area, the intake area and two control sites. FCM analysis combined the measurement of distinct scatter of cells and particles, autofluorescence of cyanobacteria and algae, and fluorescence after staining of nucleic acids with SYBR® Green for a total bacterial count. The results indicate that changes in microbial abundance in the near-field area of the KAUST SWRO outfall are minor and appear to be the result of a dilution effect rather than a direct impact of the concentrate discharge. © 2014 Elsevier B.V.

Security risk assessment and protection in the chemical and process industry

OpenAIRE

Reniers, Genserik; van Lerberghe, Paul; van Gulijk, Coen

2014-01-01

This article describes a security risk assessment and protection methodology that was developed for use in the chemical- and process industry in Belgium. The approach of the method follows a risk-based approach that follows desing principles for chemical safety. That approach is beneficial for workers in the chemical industry because they recognize the steps in this model from familiar safety models .The model combines the rings-of-protection approach with generic security practices including...

An Investigation on the Industrial Wastewater in Tehran Province

Directory of Open Access Journals (Sweden)

Ali Torabian

2005-08-01

Full Text Available During 1994 to 1999  a research program titled “A qualitative and quantitative review of industrial wastewater in Tehran province”  was done . This article presents the most important results obtained from this study . The research covered 330 food , textile , chemical , and Materials (Metal and liquid materials  factories . Completing of the questionnaire , sampling from the wastewater and analyzing have been done for 5  years . The results show that completely wastewater treatment in food , textile and metal industries were done in 8% , 18% and 17% of units respectively . In chemical industries for major groups include pharmaceutical , soap and detergent , pulp and paper , and paint industries were studied . In pharmaceutical and pulp and paper industries , there were only one factory in each group which were doing a complete treatment , and in detergent and paint industries there were no complete treatment at all . Maximum discharge of wastewater in food and textile industries were into surface waters . They were 62.4% and 48.8% respectively . But mainly wastwater discharging in metal and liquid materials industries were into ground waters which were 86% and 83% respectively .

Experimental Investigation of Pulsed Nanosecond Streamer Discharges for CO2 Reforming

Science.gov (United States)

Pachuilo, Michael; Levko, Dima; Raja, Laxminarayan; Varghese, Philip

2016-09-01

Rapid global industrialization has led to an increase in atmospheric greenhouse gases, specifically carbon dioxide levels. Plasmas present a great potential for efficient reforming of greenhouse gases. There are several plasma discharges which have been reported for reforming process: dielectric barrier discharges (DBD), microwave discharges, and glide-arcs. Microwave discharges have CO2 conversion energy efficiency of up to 40% at atmospheric conditions, while glide-arcs have 43% and DBD 2-10%. In our study, we analyze a single nanosecond pulsed cathode directed streamer discharge in CO2 at atmospheric pressure and temperature. We have conducted time resolved imaging with spectral bandpass filters of a streamer discharge with an applied negative polarity pulse. The image sequences have been correlated to the applied voltage and current pulses. From the spectral filters we can determine where spatially and temporally excited species are formed. In this talk we report on spectroscopic studies of the discharge and estimate plasma properties such as temperature and density of excited species and electrons. Furthermore, we report on the effects of pulse polarity as well as anodic streamer discharges on the CO2 conversion efficiency. Finally, we will focus on the effects of vibrational excitation on carbon dioxide reforming efficiency for streamer discharges. Our experimental results will be compared with an accompanying plasma computational model studies.

The MARINA model (Model to Assess River Inputs of Nutrients to seAs)

NARCIS (Netherlands)

Strokal, Maryna; Kroeze, Carolien; Wang, Mengru; Bai, Zhaohai; Ma, Lin

2016-01-01

Chinese agriculture has been developing fast towards industrial food production systems that discharge nutrient-rich wastewater into rivers. As a result, nutrient export by rivers has been increasing, resulting in coastal water pollution. We developed a Model to Assess River Inputs of Nutrients

Economic and Technical Assessment of Wood Biomass Fuel Gasification for Industrial Gas Production

Energy Technology Data Exchange (ETDEWEB)

Anastasia M. Gribik; Ronald E. Mizia; Harry Gatley; Benjamin Phillips

2007-09-01

This project addresses both the technical and economic feasibility of replacing industrial gas in lime kilns with synthesis gas from the gasification of hog fuel. The technical assessment includes a materials evaluation, processing equipment needs, and suitability of the heat content of the synthesis gas as a replacement for industrial gas. The economic assessment includes estimations for capital, construction, operating, maintenance, and management costs for the reference plant. To perform these assessments, detailed models of the gasification and lime kiln processes were developed using Aspen Plus. The material and energy balance outputs from the Aspen Plus model were used as inputs to both the material and economic evaluations.

Spatial Characteristics and Driving Factors of Provincial Wastewater Discharge in China.

Science.gov (United States)

Chen, Kunlun; Liu, Xiaoqiong; Ding, Lei; Huang, Gengzhi; Li, Zhigang

2016-12-09

Based on the increasing pressure on the water environment, this study aims to clarify the overall status of wastewater discharge in China, including the spatio-temporal distribution characteristics of wastewater discharge and its driving factors, so as to provide reference for developing "emission reduction" strategies in China and discuss regional sustainable development and resources environment policies. We utilized the Exploratory Spatial Data Analysis (ESDA) method to analyze the characteristics of the spatio-temporal distribution of the total wastewater discharge among 31 provinces in China from 2002 to 2013. Then, we discussed about the driving factors, affected the wastewater discharge through the Logarithmic Mean Divisia Index (LMDI) method and classified those driving factors. Results indicate that: (1) the total wastewater discharge steadily increased, based on the social economic development, with an average growth rate of 5.3% per year; the domestic wastewater discharge is the main source of total wastewater discharge, and the amount of domestic wastewater discharge is larger than the industrial wastewater discharge. There are many spatial differences of wastewater discharge among provinces via the ESDA method. For example, provinces with high wastewater discharge are mainly the developed coastal provinces such as Jiangsu Province and Guangdong Province. Provinces and their surrounding areas with low wastewater discharge are mainly the undeveloped ones in Northwest China; (2) The dominant factors affecting wastewater discharge are the economy and technological advance; The secondary one is the efficiency of resource utilization, which brings about the unstable effect; population plays a less important role in wastewater discharge. The dominant driving factors affecting wastewater discharge among 31 provinces are divided into three types, including two-factor dominant type, three-factor leading type and four-factor antagonistic type. In addition, the

Heart pacemaker - discharge

Science.gov (United States)

Cardiac pacemaker implantation - discharge; Artificial pacemaker - discharge; Permanent pacemaker - discharge; Internal pacemaker - discharge; Cardiac resynchronization therapy - discharge; CRT - discharge; ...

Review of research on impacts to biota of discharges of naturally occurring radionuclides in produced water to the marine environment

International Nuclear Information System (INIS)

Hosseini, Ali; Brown, Justin E.; Gwynn, Justin P.; Dowdall, Mark

2012-01-01

Produced water has been described as the largest volume waste stream in the exploration and production process of oil and gas. It is accompanied by discharges of naturally occurring radionuclides raising concerns over the potential radiological impacts of produced water on marine biota. In the Northern European marine environment, radioactivity in produced water has received substantial attention owing to the OSPAR Radioactive Substances Strategy which aims at achieving ‘concentrations in the environment near background values for naturally occurring radioactive substances’. This review provides an overview of published research on the impacts to biota from naturally occurring radionuclides discharged in produced water by the offshore oil and gas industry. In addition to summarising studies and data that deal directly with the issue of dose and effect, the review also considers studies related to the impact of added chemicals on the fate of discharged radionuclides. The review clearly illustrates that only a limited number of studies have investigated possible impacts on biota from naturally occurring radionuclides present in produced water. Hence, although these studies indicate that the risk to the environment from naturally occurring radionuclides discharged in produced water is negligible, the substantial uncertainties involved in the assessments of impact make it difficult to be conclusive. With regard to the complexity involved in the problem under consideration there is a pressing need to supplement existing data and acquire new knowledge. Finally, the present work identifies some knowledge gaps to indicate future research requirements. -- Highlights: ► Produced water from offshore oil industry contains naturally occurring radionuclides. ► Published research on the impacts to biota from these radionuclides is reviewed. ► Review includes impact of added chemicals on the fate of discharged radionuclides. ► Studies indicate negligible risk to biota

Some aspects of cooling water discharges and environmental enhancement

International Nuclear Information System (INIS)

Grimaas, U.

1976-01-01

As a consequence of the effects of cooling water discharge on the environment, the siting of nuclear power plants is approached with cautiousness. The pros and cons are discussed of siting near bodies of good quality water or in more densely populated or industrial areas. Properties and effects of thermal discharges are elaborated. The effects of heat on the activity of individual organisms, on the accumulation of organic material, on the mineralization rate of organic matter and on the transport of oxygen all have influences on recipient water bodies. Examples of siting Swedish thermal power stations are described and these indicate some negative effects. However, the results do not repudiate the possibility of good effects from the design of new cooling water intake and discharge systems that would speed up the mineralization of organic matters by addition of heat and oxygen. It is concluded that, when choosing between possible sites, areas should be selected where the available energy of the discharge can be used to improve water quality. (author)

Shoulder replacement - discharge

Science.gov (United States)

Total shoulder arthroplasty - discharge; Endoprosthetic shoulder replacement - discharge; Partial shoulder replacement - discharge; Partial shoulder arthroplasty - discharge; Replacement - shoulder - discharge; Arthroplasty - shoulder - discharge

Tools used by the insurance industry to assess risk from hydroclimatic extremes

Science.gov (United States)

Higgs, Stephanie; McMullan, Caroline

2016-04-01

Probabilistic catastrophe models are widely used within the insurance industry to assess and price the risk of natural hazards to individual residences through to portfolios of millions of properties. Over the relatively short period that catastrophe models have been available (almost 30 years), the insurance industry has built up a financial resilience to key natural hazards in certain areas (e.g. US tropical cyclone, European extra-tropical cyclone and flood). However, due the rapidly expanding global population and increase in wealth, together with uncertainties in the behaviour of meteorological phenomena introduced by climate change, the domain in which natural hazards impact society is growing. As a result, the insurance industry faces new challenges in assessing the risk and uncertainty from natural hazards. As a catastrophe modelling company, AIR Worldwide has a toolbox of options available to help the insurance industry assess extreme climatic events and their associated uncertainty. Here we discuss several of these tools: from helping analysts understand how uncertainty is inherently built in to probabilistic catastrophe models, to understanding alternative stochastic catalogs for tropical cyclone based on climate conditioning. Through the use of stochastic extreme disaster events such as those provided through AIR's catalogs or through the Lloyds of London marketplace (RDS's) to provide useful benchmarks for the loss probability exceedence and tail-at-risk metrics outputted from catastrophe models; to the visualisation of 1000+ year event footprints and hazard intensity maps. Ultimately the increased transparency of catastrophe models and flexibility of a software platform that allows for customisation of modelled and non-modelled risks will drive a greater understanding of extreme hydroclimatic events within the insurance industry.

Impacts from oil and gas produced water discharges on the Gulf of Mexico hypoxic zone

International Nuclear Information System (INIS)

Parker, M.E.; Satterlee, K.; Veil, J.A.

2006-01-01

Shallow water areas of the Gulf of Mexico continental shelf experience low dissolved oxygen (hypoxia) each summer. The hypoxic zone is primarily caused by input of nutrients from the Mississippi and Atchafalaya Rivers. The nutrients stimulate the growth of phytoplankton, which leads to reduction of the oxygen concentration near the sea floor. During the renewal of an offshore discharge permit used by the oil and gas industry in the Gulf of Mexico, the U.S. Environmental Protection Agency (EPA) identified the need to assess the potential contribution from produced water discharges to the occurrence of hypoxia. The EPA permit required either that all platforms in the hypoxic zone submit produced water samples, or that industry perform a coordinated sampling program. This paper, based on a report submitted to EPA in August 2005 (1), describes the results of the joint industry sampling program and the use of those results to quantify the relative significance of produced water discharges in the context of other sources on the occurrence of hypoxia in the Gulf of Mexico. In the sampling program, 16 facilities were selected for multiple sampling - three times each at one month intervals-- and another 34 sites for onetime sampling. The goal of the sampling program was to quantify the sources and amount of oxygen demand associated with a variety of Gulf of Mexico produced waters. Data collected included direct oxygen demand measured by BOD5 (5-day biochemical oxygen demand) and TOC (total organic carbon) and indirect oxygen demand measured by nitrogen compounds (ammonia, nitrate, nitrate, and TKN (total Kjeldahl nitrogen)) and phosphorus (total phosphorus and orthophosphate). These data will serve as inputs to several available computer models currently in use for forecasting the occurrence of hypoxia in the Gulf of Mexico. The output of each model will be compared for consistency in their predictions and then a semi-quantitative estimate of the relative significance of

Toxicological evaluation of complex industrial wastes: Implications for exposure assessment

Energy Technology Data Exchange (ETDEWEB)

DeMarini, D.M.; Gallagher, J.E.; Houk, V.S.; Simmons, J.E.

1990-07-01

We evaluated a variety of short-term bioassays to construct a battery of tests that could be used for assessing the biological effects of potentially hazardous complex industrial wastes. Ten samples were studied for hepatotoxicity; these samples and an additional five were studied for mutagenicity. Although the data are limited to these samples, the results suggest that the Salmonella assay (strain TA98) or a prophage-induction assay (both in the presence of S9) in combination with determination of relative liver weight and levels of a set of serum enzymes in rats may provide a battery of tests suitable to characterize complex industrial wastes for mutagenic and hepatotoxic potential. The biological activities exhibited by the wastes were not readily predicted by the chemical profiles of the wastes, emphasizing the importance of characterizing potentially hazardous complex industrial wastes by both chemical and biological means. DNA from liver, lung, and bladder of rats exposed to some of the wastes was analyzed by the 32P-postlabeling technique for the presence of DNA adducts. A waste that produced mutagenic urine produced a DNA adduct in bladder DNA. The implications of this approach for assessment of exposure to complex hazardous waste mixtures are discussed.

Properties of water surface discharge at different pulse repetition rates

International Nuclear Information System (INIS)

Ruma,; Yoshihara, K.; Hosseini, S. H. R.; Sakugawa, T.; Akiyama, H.; Akiyama, M.; Lukeš, P.

2014-01-01

The properties of water surface discharge plasma for variety of pulse repetition rates are investigated. A magnetic pulse compression (MPC) pulsed power modulator able to deliver pulse repetition rates up to 1000 Hz, with 0.5 J per pulse energy output at 25 kV, was used as the pulsed power source. Positive pulse with a point-to-plane electrode configuration was used for the experiments. The concentration and production yield of hydrogen peroxide (H 2 O 2 ) were quantitatively measured and orange II organic dye was treated, to evaluate the chemical properties of the discharge reactor. Experimental results show that the physical and chemical properties of water surface discharge are not influenced by pulse repetition rate, very different from those observed for under water discharge. The production yield of H 2 O 2 and degradation rate per pulse of the dye did not significantly vary at different pulse repetition rates under a constant discharge mode on water surface. In addition, the solution temperature, pH, and conductivity for both water surface and underwater discharge reactors were measured to compare their plasma properties for different pulse repetition rates. The results confirm that surface discharge can be employed at high pulse repetition rates as a reliable and advantageous method for industrial and environmental decontamination applications.

Industrial pollution load assessment in Phnom Penh, Cambodia using an industrial pollution projection system.

Science.gov (United States)

San, Vibol; Spoann, Vin; Schmidt, Johannes

2018-02-15

Approximately 56% out of the total 1302 Cambodian firms are operated in the Capital city of Cambodia. The necessary information on industrial pollution to set strategies, priorities and action plans on environmental protection issues is absent in Cambodia. In the absence of this data, effective environmental protection cannot be implemented. The objective of this study is to estimate industrial pollution load by employing the Industrial Pollution Projection System, a rapid environmental management tool for assessment of pollution load, to produce a scientific rational basis for preparing future policy direction to reduce industrial pollution in Phnom Penh city. Factory data between 1994 and 2014 obtained from the Ministry of Industry and Handicraft of Cambodia were used in our study. Due to the high number of employees, the total environmental load generated in Phnom Penh city was estimated to be 476,981Mg in 2014. Phnom Penh city generated 189,109Mg of VOC, 165,411Mg of toxic chemicals to air, 38,523Mg of toxic chemicals to land, and 28,968Mg of SO 2 in 2014. The results of the estimation show that the Textiles and Apparel sector was the highest generators of toxic chemicals into land and air, and toxic metals into land, air and water, while the Basic Metal sector was the greatest contributor of toxic chemicals to water. The Textiles and Apparel sector alone emitted 436,016Mg of total pollution load. The results indicate that the Dangkao and Meanchey districts were the greatest emitters of all pollutants in Phnom Penh. The results suggest that reduction in industrial pollution could be achieved by focusing on the most polluting sectors and areas. Adopting waste minimization strategies, which include cleaner production processes, will not only reduce the cost of controlling pollution, it will also make manufacturing more efficient thereby increasing profits while reducing pollution load in the long run. Copyright © 2017 Elsevier B.V. All rights reserved.

Photodebromination of Opaque Slurries Using Titania-Coated Mercury Electrodeless Discharge Lamps.

Czech Academy of Sciences Publication Activity Database

Kaštánek, František; Církva, Vladimír; Kmentová, Hana; Kaštánek, P.; Šolcová, Olga

2016-01-01

Roč. 3, č. 7 (2016), s. 5262-5267 ISSN 2458-9403 R&D Projects: GA TA ČR TA04020700 Institutional support: RVO:67985858 Keywords : photocatalysis * electrodeless discharge lamp * polybrominated diphenyl ethers Subject RIV: CI - Industrial Chemistry, Chemical Engineering

Influence of gas discharge parameters on emissions from a dielectric barrier discharge excited argon excimer lamp

Directory of Open Access Journals (Sweden)

Mike Collier

2011-11-01

Full Text Available A dielectric barrier discharge excited neutral argon (Ar I excimer lamp has been developed and characterised. The aim of this study was to develop an excimer lamp operating at atmospheric pressure that can replace mercury lamps and vacuum equipment used in the sterilisation of medical equipment and in the food industry. The effects of discharge gas pressure, flow rate, excitation frequency and pulse width on the intensity of the Ar I vacuum ultraviolet (VUV emission at 126 nm and near infrared (NIR lines at 750.4 nm and 811.5 nm have been investigated. These three lines were chosen as they represent emissions resulting from de-excitation of excimer states that emit energetic photons with an energy of 9.8 eV. We observed that the intensity of the VUV Ar₂* excimer emission at 126 nm increased with increasing gas pressure, but decreased with increasing excitation pulse frequency and pulse width. In contrast, the intensities of the NIR lines decreased with increasing gas pressure and increased with increasing pulse frequency and pulse width. We have demonstrated that energetic VUV photons of 9.8 eV can be efficiently generated in a dielectric barrier discharge in Ar.

Applying the welfare model to at-own-risk discharges.

Science.gov (United States)

Krishna, Lalit Kumar Radha; Menon, Sumytra; Kanesvaran, Ravindran

2017-08-01

"At-own-risk discharges" or "self-discharges" evidences an irretrievable breakdown in the patient-clinician relationship when patients leave care facilities before completion of medical treatment and against medical advice. Dissolution of the therapeutic relationship terminates the physician's duty of care and professional liability with respect to care of the patient. Acquiescence of an at-own-risk discharge by the clinician is seen as respecting patient autonomy. The validity of such requests pivot on the assumptions that the patient is fully informed and competent to invoke an at-own-risk discharge and that care up to the point of the at-own-risk discharge meets prevailing clinical standards. Palliative care's use of a multidisciplinary team approach challenges both these assumptions. First by establishing multiple independent therapeutic relations between professionals in the multidisciplinary team and the patient who persists despite an at-own-risk discharge. These enduring therapeutic relationships negate the suggestion that no duty of care is owed the patient. Second, the continued employ of collusion, familial determinations, and the circumnavigation of direct patient involvement in family-centric societies compromises the patient's decision-making capacity and raises questions as to the patient's decision-making capacity and their ability to assume responsibility for the repercussions of invoking an at-own-risk discharge. With the validity of at-own-risk discharge request in question and the welfare and patient interest at stake, an alternative approach to assessing at-own-risk discharge requests are called for. The welfare model circumnavigates these concerns and preserves the patient's welfare through the employ of a multidisciplinary team guided holistic appraisal of the patient's specific situation that is informed by clinical and institutional standards and evidenced-based practice. The welfare model provides a robust decision-making framework for

Switzerland; Financial Sector Assessment Program: Technical Note: An Assessment of Insurance Core Principles for the Reinsurance Industry

OpenAIRE

International Monetary Fund

2007-01-01

This technical note discusses key findings of the assessment of Insurance Core Principles (ICP) for the reinsurance industry for Switzerland. It reveals that the Swiss reinsurance market is dominated by three large players with a strong international presence. The reinsurance industry comprises 20 professional reinsurers and 50 reinsurance captives with gross premiums written totaling SwF 37.4 billion for 2005. Swiss Re, European Re, and Converium have consistently maintained more than 75 per...

Survival of Vibrio cholerae in industrially polluted water, with ...

African Journals Online (AJOL)

containing industrial effluents. The effect of iron as well as pH on the survival of Vibrio cholerae (non-O1, El Tor and classical strains) in water samples from 12 points, where selected industrial effluents were discharged into rivers, was studied.

Assessment of the effect of effluent discharge from coffee refineries ...

African Journals Online (AJOL)

Admin

2Department of Environmental Health, Jimma University, Jimma, Ethiopia. ... cherries, transport them hydraulically through the pulping ..... Table 2. Interaction effects of effluent discharges by coffee refineries on physical characteristics between.

Quantified risk assessment for hazardous industry: The Australian approach

International Nuclear Information System (INIS)

Haddad, S.

1994-01-01

The paper presents the key conceptual and methodological aspects of Quantified Risk Assessment (QRA) and Hazard Analysis techniques as applied in the process industry, mostly in New South Wales, Australia. Variations in the range of applications of the techniques between the nuclear and non-nuclear industries are highlighted. The opportunity is taken to discuss cur-rent and future issues and trends concerning QRA, including: uncertainties and limitations; acceptability of risk criteria; toxicity and chronic health effects; new technology; modelling topics; and, environmental risk. The paper concludes by indicating that the next generation QRA, as applicable to Australian conditions in particular, will benefit from are think in two areas: a multi-level approach to QRA, and a range of not fully explored applications

Quantified risk assessment for hazardous industry: the Australian approach

International Nuclear Information System (INIS)

Haddad, S.

1994-01-01

The paper presents the key conceptual and methodological aspects of Quantified Risk Assessment (QRA) and Hazard Analysis techniques as applied in the process industry, mostly in New South Wales, Australia. Variations in the range of applications of the techniques between the nuclear and non-nuclear industries are highlighted. The opportunity is taken to discuss current and future issues and trends concerning QRA, including: uncertainties and limitations; acceptability of risk criteria; toxicity and chronic health effects; new technology; modelling topics; and environmental risk. The paper concludes by indicating that the next generation QRA, as applicable to Australian conditions in particular, will benefit from a rethink in two areas: a multi-level approach to QRA, and a range of not fully explored applications. 8 refs., 2 tabs

Practical Approaches for Assessment of Daily and Post-discharge Room Disinfection in Healthcare Facilities.

Science.gov (United States)

Deshpande, Abhishek; Donskey, Curtis J

2017-09-01

Cleaning and disinfection in healthcare facilities is essential to ensure patient safety. This review examines practical strategies used to assess and improve the effectiveness of daily and post-discharge manual cleaning in healthcare facilities. Effective implementation of cleaning interventions requires objective monitoring of staff performance with regular feedback on performance. Use of fluorescent markers to assess thoroughness of cleaning and measurement of residual ATP can provide rapid and objective feedback to personnel and have been associated with improved cleaning. Direct observation of cleaning and interviews with front-line staff are useful to identify variations and deficiencies in practice that may not be detected by other methods. Although not recommended for routine monitoring, cultures can be helpful for outbreak investigations. Monitoring and feedback can be effective in improving cleaning and disinfection in healthcare facilities. Ongoing commitment within institutions is needed to sustain successful cleaning and disinfection programs.

Simulation study of the discharge characteristics of silos with cohesive particles

Science.gov (United States)

Hund, David; Weis, Dominik; Hesse, Robert; Antonyuk, Sergiy

2017-06-01

In many industrial applications the silo for bulk materials is an important part of an overall process. Silos are used for instance to buffer intermediate products to ensure a continuous supply for the next process step. This study deals with the discharging behaviour of silos containing cohesive bulk solids with particle sizes in the range of 100-500 μm. In this contribution the TOMAS [1,2] model developed for stationary and non-stationary discharging of a convergent hopper is verified with experiments and simulations using the Discrete Element Method. Moreover the influence of the cohesion of the bulk solids on the discharge behaviour is analysed by the simulation. The simulation results showed a qualitative agreement with the analytical model of TOMAS.

Older veterans and emergency department discharge information.

Science.gov (United States)

Hastings, Susan; Stechuchak, Karen; Oddone, Eugene; Weinberger, Morris; Tucker, Dana; Knaack, William; Schmader, Kenneth

2012-10-01

Study goals were to assess older veterans' understanding of their emergency department (ED) discharge information and to determine the association between understanding discharge information and patient assessment of overall quality of care. Telephone interviews were conducted with 305 patients aged 65 or older (or their proxies) within 48 h of discharge from a Veterans Affairs Medical Center ED. Patients were asked about their perceived understanding (at the time of ED discharge) of information about their ED diagnosis, expected course of illness, contingency plan (ie, return precautions, who to call if it got worse, potential medication side effects) and follow-up care. Overall quality of ED care was rated on a four-point scale of poor, fair, good or excellent. Patients or their proxies reported not understanding information about their ED diagnosis (21%), expected course of illness (50%), contingency plan (43%), and how soon they needed to follow-up with their primary care provider (25%). In models adjusted for age and race, a positive association was observed between perceived understanding of the cause of the problem (OR 2.3; 95% CI 1.3 to 4.0), expected duration of symptoms (OR 1.6; 95% CI 1.0 to 2.5) and the contingency plan (OR 2.2; CI 1.3 to 3.4), and rating overall ED care as excellent. Older veterans may not understand key items of information at the time ED discharge, and this may have an impact on how they view the quality of ED care. Strategies are needed to improve communication of ED discharge information to older veterans and their families.

Plasma processes in water under effect of short duration pulse discharges

Science.gov (United States)

Gurbanov, Elchin

2013-09-01

It is very important to get a clear water without any impurities and bacteria by methods, that don't change the physical and chemical indicators of water now. In this article the plasma processes during the water treatment by strong electric fields and short duration pulse discharges are considered. The crown discharge around an electrode with a small radius of curvature consists of plasma leader channels with a high conductivity, where the thermo ionization processes and UV-radiation are taken place. Simultaneously the partial discharges around potential electrode lead to formation of atomic oxygen and ozone. The spark discharge arises, when plasma leader channels cross the all interelectrode gap, where the temperature and pressure are strongly grown. As a result the shock waves and dispersing liquid streams in all discharge gap are formed. The plasma channels extend, pressure inside it becomes less than hydrostatic one and the collapse and UV-radiation processes are started. The considered physical processes can be successfully used as a basis for development of pilot-industrial installations for conditioning of drinking water and to disinfecting of sewage.

An assessment of chain management practice within the industrial pork value chain: Beijing Ciity, China

NARCIS (Netherlands)

Wenzhao, M.

2008-01-01

The research assesses the value chain and quality control of the pork industry in Beijing municipality of China. Through interviewing all the actors of pork industrial value chain in Beijing, the roles functions and problems of each of the actor of the pork industrial value chain of Beijing were

Evaluation of the phytotoxicity of polycontaminated industrial effluents using the lettuce plant (Lactuca sativa) as a bioindicator.

Science.gov (United States)

Charles, Jérémie; Sancey, Bertrand; Morin-Crini, Nadia; Badot, Pierre-Marie; Degiorgi, François; Trunfio, Giuseppe; Crini, Grégorio

2011-10-01

Industrial wastewater containing heavy metals is generally decontaminated by physicochemical treatment consisting in insolublizing the contaminants and separating the two phases, water and sludge, by a physical process (filtration, settling or flotation). However, chemical precipitation does not usually remove the whole pollution load and the effluent discharged into the environment can be toxic even if it comes up to regulatory standards. To assess the impact of industrial effluent from 4 different surface treatment companies, we performed standardized bioassays using seeds of the lettuce Lactuca sativa. We measured the rate of germination, and the length and mass of the lettuce plantlet. The results were used to compare the overall toxicity of the different effluents: effluents containing copper and nickel had a much higher impact than those containing zinc or aluminum. In addition, germination tests conducted using synthetic solutions confirmed that mixtures of metals have higher toxicity than the sum of their separate constituents. These biological tests are cheap, easy to implement, reproducible and highlight the effects caused by effluent treated with the methods commonly applied in industry today. They could be routinely used to check the impact of industrial discharges, even when they meet regulatory requirements for the individual metals. Copyright © 2011 Elsevier Inc. All rights reserved.

Plasma Discharge Process in a Pulsed Diaphragm Discharge System

Science.gov (United States)

Duan, Jianjin; Hu, Jue; Zhang, Chao; Wen, Yuanbin; Meng, Yuedong; Zhang, Chengxu

2014-12-01

As one of the most important steps in wastewater treatment, limited study on plasma discharge process is a key challenge in the development of plasma applications. In this study, we focus on the plasma discharge process of a pulsed diaphragm discharge system. According to the analysis, the pulsed diaphragm discharge proceeds in seven stages: (1) Joule heating and heat exchange stage; (2) nucleated site formation; (3) plasma generation (initiation of the breakdown stage); (4) avalanche growth and plasma expansion; (5) plasma contraction; (6) termination of the plasma discharge; and (7) heat exchange stage. From this analysis, a critical voltage criterion for breakdown is obtained. We anticipate this finding will provide guidance for a better application of plasma discharges, especially diaphragm plasma discharges.

Increasing the effectiveness of purification of wash water discharge during placer mining. Povyshenie effekitivnosti ochistki promstokov pri razrabotke rossypei

Energy Technology Data Exchange (ETDEWEB)

Volkova, V M; Matveev, A A

1981-01-01

In the book research results are generalized for processes of water supply and purification of wash water discharges from dredge mining of placer deposits. Aspects of the geological and mineralogical structure of the solid phase of dredge waste waters and regularities in its influence on the sedimentation capacity of the suspended matter are examined. On the basis of a study of distinctive features in the hydrodynamic processes occurring in dredge sludge-settling tanks, a method is proposed for calculation of the settling tank parameters, allowing their areas of application for wash water discharge clarification to be determined reliably. Results are reported for a study of methods of intensification of the deposition of suspended clay particles in dredge waste waters, (methods) based on the use of both a series of coagulants and flocculants producible by industry and various production wastes. Aspects of the theory and practice of organizing circulating water supply for dredges are examined. The influence of wash water discharges forming during placer mining on the environment is assessed.

40 CFR 403.12 - Reporting requirements for POTW's and industrial users.

Science.gov (United States)

2010-07-01

... rate of production, and Standard Industrial Classification of the operation(s) carried out by such... hazardous wastes for which the Industrial User has submitted initial notification under paragraph (p) of... other). If the Industrial User discharges more than 100 kilograms of such waste per calendar month to...

A Critical Assessment on SPC Implementation in the UK Food Industry

Directory of Open Access Journals (Sweden)

Sarina Abdul Halim Lim

2016-02-01

Full Text Available Statistical process control (SPC is one of the most widely applied techniques to control and improve processes in manufacturing industry, but very few studies have reported on the successful application of SPC in the food industry. This paper aims to critically assess the status of SPC in the UK food manufacturing industry and suggests avenues for future research. By surveying the UK food-manufacturing companies, forty-five percent of them were identified implemented SPC, with x-R and x-S charts found to be the most commonly applied SPC charts in this industry. Top management commitment was identified as the most critical factor, while lack of SPC training is the most significant challenge and lack of awareness of SPC as the main reason for food manufacturing companies not implementing SPC. The paper provides information to food companies in the UK on most common practiced and useful quality tools, SPC charts and critical success factors in the food industry. Furthermore, based on the process performance parameters, SPC companies were observed to achieving better results compared to non-SPC companies.

Identification of hazards for water environment in the Upper Silesian Coal Basin caused by the discharge of salt mine water containing particularly harmful substances and radionuclides

Directory of Open Access Journals (Sweden)

Jan Bondaruk

2015-01-01

Full Text Available The Upper Silesian urban-industrial agglomeration is one of the most industrialized areas in Europe. The intense industrialization should be attributed mostly to the presence of coal and other minerals deposits and its extraction. Mining areas of hard coal mines comprise approximately 25% of the total catchment area of watercourses in the area of Upper Silesian Coal Basin, including the river basin of the Upper Oder River and the Little Vistula River. The mining, its scope and depth, duration of mining works, extraction systems being used and the total volume of the drainage fundamentally affect the conditions of groundwater and surface water in the studied area. In this paper, an overall characteristics of the coal mining industry in the area of USCB was made, including the issues of its influence on water environment in the light of the requirements of the Water Framework Directive (WFD and its guidelines transposed into Polish law. An analysis of the collected data, obtained from collieries, relating to the quantity and quality of water flowing into the workings and discharged to surface watercourses, was performed. An approach to the requirements for wastewater discharge into the environment by these enterprises was presented regarding the physicochemical parameters, possible harmful substances and radionuclides measured in mine waters. The main goal of the paper is to recognize the condition of surface water bodies in the area of Upper Silesian Coal Basin and to make the assessment of the biological condition using Ecological Risk Assessment and bioindication methods.

Physics of mercury-free high-pressure discharge lamps

International Nuclear Information System (INIS)

Born, M

2002-01-01

This paper gives a summary of recent results about the replacement of mercury in high-pressure discharge lamps by metallic zinc. Actually, this topic is of high relevance for the lighting industry due to the need of more environmentally friendly products. The work presented here is supported by the German government under contract no 13N8072 and 13N8264. Due to upcoming European legislations which are expected for the year 2003, the replacement of mercury in lighting products is a high priority task. For example, mercury-free headlight discharge lamps are requested by the automotive industry. Pure zinc/argon discharges as well as lamps including zinc or mercury and metal halide additives are investigated. Experimental data are compared with model calculations of the energy balance involving the transport of heat and radiation. Since the excitation energies of relevant zinc transitions are lower than for mercury, axis temperatures of pure zinc lamps are about 300 K below the value of mercury arcs. In addition, the thermal conductivity of zinc including the contribution of radiation diffusion is larger than compared to mercury. From lamp voltage measurements it is found that the cross section for elastical electron scattering by zinc atoms is about the same than for mercury. When adding metal halides to a pure zinc discharge with argon as a starting gas, i.e. NaI, TlI, DyI 3 , axis temperatures decrease to about 5100 K due to strong radiation cooling. In order to obtain sufficiently large lamp voltages, wall temperatures of more than 1300 K are adjusted by means of polycrystalline aluminaoxide (Al 2 O 3 ) as a wall material. Electric field strengths of 6.0 and 8.6 V mm -1 are measured for metal halide lamps containing zinc or mercury, respectively. The light technical data of the discharges are very close, since mercury and zinc do not contribute significantly to the radiation in the visible range. Efficacies of up to 93 and 100 lm W -1 are found in metal halide

Life cycle assessment-driven selection of industrial ecology strategies.

Science.gov (United States)

Ardente, Fulvio; Cellura, Maurizio; Lo Brano, Valerio; Mistretta, Marina

2010-01-01

The paper presents an application of the Life-Cycle Assessment (LCA) to the planning and environmental management of an “eco-industrial cluster.” A feasibility study of industrial symbiosis in southern Italy is carried out, where interlinked companies share subproducts and scraps, services, structures, and plants to reduce the related environmental impact. In particular, the research focuses on new recycling solutions to create open recycling loops in which plastic subproducts and scraps are transferred to external production systems. The main environmental benefits are the reduction of resource depletion, air emissions, and landfilled wastes. The proposed strategies are also economically viable and they suggest cost abatement for the involved companies. This research shows the need for a multidisciplinary approach to data processing and to complexity managing of the investigated systems. In this context, life-cycle thinking is required to be promoted throughout the economy, as well to be as a part of all decisions on products and other criteria such as functionality, health, and safety. The Life-Cycle Assessment approach can be assumed as a methodology for influencing decision makers to make sustainable choices.

Double discharges in unipolar-pulsed dielectric barrier discharge xenon excimer lamps

International Nuclear Information System (INIS)

Liu Shuhai; Neiger, Manfred

2003-01-01

Excitation of dielectric barrier discharge xenon excimer lamps by unipolar short square pulses is studied in this paper. Two discharges with different polarity are excited by each voltage pulse (double discharge phenomenon). The primary discharge occurs at the top or at the rising flank of the applied unipolar square pulse, which is directly energized by the external circuit. The secondary discharge with the reversed polarity occurs at the falling flank or shortly after the falling flank end (zero external voltage) depending on the pulse width, which is energized by the energy stored by memory charges deposited by the primary discharge. Fast-speed ICCD imaging shows the primary discharge has a conic discharge appearance with a channel broadening on the anode side. This channel broadening increases with increasing the pulse top level. Only the anode-side surface discharge is observed in the primary discharge. The surface discharge on the cathode side which is present in bipolar sine voltage excitation is not observed. On the contrary, the secondary discharge has only the cathode-side surface discharge. The surface discharge on the anode side is not observed. The secondary discharge is much more diffuse than the primary discharge. Time-resolved emission measurement of double discharges show the secondary discharge emits more VUV xenon excimer radiation but less infrared (IR) xenon atomic emission than the primary discharge. It was found that the IR xenon atomic emission from the secondary discharge can be reduced by shortening the pulse width. The energy efficiency of unipolar-pulsed xenon excimer lamps (the overall energy efficiency of double discharges) is much higher than that obtained under bipolar sine wave excitation. The output VUV spectrum under unipolar pulse excitation is found to be identical to that under sine wave excitation and independent of injected electric power

Geothermal industry assessment

Science.gov (United States)

1980-07-01

Focus is on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews and with executives of 75 companies active in the field.

Integration and Assessment of Multiple Mobile Manipulators in a Real-World Industrial Production Facility

DEFF Research Database (Denmark)

Bøgh, Simon; Schou, Casper; Rühr, Thomas

2014-01-01

This paper presents a large-scale research experiment carried out within the TAPAS project, where multiple mobile manipulators were integrated and assessed in an industrial context. We consider an industrial scenario in which mobile manipulators naturally extend automation of logistic tasks towar...

A quantification of discharge readiness after outpatient anaesthesia ...

African Journals Online (AJOL)

Adele

RESEARCH. Southern ... Nurses and patients were blinded to each other's assessments . ... and, 3) time to discharge readiness according to nursing assessments. .... Male/ Female. 69/125. 36/64. Ethnicity: Caucasian. 132. 68. Asian. 48. 24.7.

Status of water pollution in relation to industrialization in Rajasthan.

Science.gov (United States)

Rajput, Ritu Singh; Pandey, Sonali; Bhadauria, Seema

2017-09-26

India is a large and densely populated country; its economy is largely agricultural. Making the best use of the country's manpower has always posed a challenge. Industrialization could become a dominant component of the economy and displace agriculture. Traditional livelihoods of occupational groups are threatened by the practice of disposing untreated industrial waste into rivers and bodies of water. These uncontrolled disposals impact local natural resources with negative long-term effects. Industrialization is the development of intellectual and financial trade that changes a predominantly rustic culture into a modern one. Many industrial units discharge wastewater locally without treatment. Many industries directly discharged their waste into lakes, rivers and ocean. Water contamination impacts the environment. Pesticides, chemical, waste oil and heavy metals are regularly transported into their waters. Humans and other living organisms can accumulate heavy metals from industrial discharges in their tissues. Industrial waste may be reactive, corrosive, flammable, or toxic. When untreated sewage is emptied into rivers, it causes diseases like typhoid, dysentery and cholera. Natural elements and plant supplements like nitrate and phosphates stimulate growth of algae on the water surface. The algae reduce the oxygen in the water and cause eutrophication. It is harmful to the water ecosystem. In Rajasthan proper, there are a number of sites bordering rivers and lakes where the pace of industrialization has proceeded far beyond the ability of regulators to establish and enforce meaningful limits on the amount of point source pollution permitted to the various industrial complexes, which include cement, chemical, fertilizer, textile, mining, quarrying, dyeing and printing facilities. The scale of the problem is obvious to the casual observer, but actual documentation of the total impact remains to be done.

Toxicological evaluation of complex industrial wastes: Implications for exposure assessment

Energy Technology Data Exchange (ETDEWEB)

DeMarini, D.M.; Gallagher, J.E.; Houk, V.S.; Simmons, J.E.

1989-01-01

A variety of short-term bioassays to construct a battery of tests that could be used for assessing the biological effects of potentially hazardous complex industrial wastes were evaluated. Ten samples were studied for hepatotoxicity: These samples and an additional five were studied for mutagenicity. Although the data are limited to these samples, the results suggest that the Salmonella assay (either TA98 or TA100) or a prophage-induction assay (both in the presence of S9) in combination with determination of relative liver weight and levels of a set of serum enzymes in rats would provide a battery of tests suitable to characterize complex industrial wastes for mutagenic and hepatotoxic potential. The biological activities exhibited by the wastes were not readily predicted by the chemical profiles of the wastes, emphasizing the importance of characterizing potentially hazardous complex industrial wastes by both chemical and biological means.

Investigation on discharge characteristics of a coaxial dielectric barrier discharge reactor driven by AC and ns power sources

Science.gov (United States)

Qian, WANG; Feng, LIU; Chuanrun, MIAO; Bing, YAN; Zhi, FANG

2018-03-01

A coaxial dielectric barrier discharge (DBD) reactor with double layer dielectric barriers has been developed for exhaust gas treatment and excited either by AC power or nanosecond (ns) pulse to generate atmospheric pressure plasma. The comparative study on the discharge characteristics of the discharge uniformity, power deposition, energy efficiency, and operation temperature between AC and ns pulsed coaxial DBD is carried out in terms of optical and electrical characteristics and operation temperature for optimizing the coaxial DBD reactor performance. The voltages across the air gap and dielectric layer and the conduction and displacement currents are extracted from the applied voltages and measured currents of AC and ns pulsed coaxial DBDs for the calculation of the power depositions and energy efficiencies through an equivalent electrical model. The discharge uniformity and operating temperature of the coaxial DBD reactor are monitored and analyzed by optical images and infrared camera. A heat conduction model is used to calculate the temperature of the internal quartz tube. It is found that the ns pulsed coaxial DBD has a much higher instantaneous power deposition in plasma, a lower total power consumption, and a higher energy efficiency compared with that excited by AC power and is more homogeneous and stable. The temperature of the outside wall of the AC and ns pulse excited coaxial DBD reaches 158 °C and 64.3 °C after 900 s operation, respectively. The experimental results on the comparison of the discharge characteristics of coaxial DBDs excited by different powers are significant for understanding of the mechanism of DBDs, reducing energy loss, and optimizing the performance of coaxial DBD in industrial applications.

Mini-review: Assessing the drivers of ship biofouling management--aligning industry and biosecurity goals.

Science.gov (United States)

Davidson, Ian; Scianni, Christopher; Hewitt, Chad; Everett, Richard; Holm, Eric; Tamburri, Mario; Ruiz, Gregory

2016-01-01

Biofouling exerts a frictional and cost penalty on ships and is a direct cause of invasion by marine species. These negative consequences provide a unifying purpose for the maritime industry and biosecurity managers to prevent biofouling accumulation and transfer, but important gaps exist between these sectors. This mini-review examines the approach to assessments of ship biofouling among sectors (industry, biosecurity and marine science) and the implications for existing and emerging management of biofouling. The primary distinctions between industry and biosecurity in assessment of vessels biofouling revolve around the resolution of biological information collected and the specific wetted surface areas of primary concern to each sector. The morphological characteristics of biofouling and their effects on propulsion dynamics are of primary concern to industry, with an almost exclusive focus on the vertical sides and flat bottom of hulls and an emphasis on antifouling and operational performance. In contrast, the identity, biogeography, and ecology of translocated organisms is of highest concern to invasion researchers and biosecurity managers and policymakers, especially as it relates to species with known histories of invasion elsewhere. Current management practices often provide adequate, although not complete, provision for hull surfaces, but niche areas are well known to enhance biosecurity risk. As regulations to prevent invasions emerge in this arena, there is a growing opportunity for industry, biosecurity and academic stakeholders to collaborate and harmonize efforts to assess and manage biofouling of ships that should lead to more comprehensive biofouling solutions that promote industry goals while reducing biosecurity risk and greenhouse gas emissions.

Management of Discharge of Low Level Liquid Radioactive Waste Generated in Medical, Educational, Research and Industrial Facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-07-15

benefit from the information in this publication, particularly with respect to design optimization for decay tanks or guidance provided on quality assurance arrangements. The most appropriate management option for the country and for individual facilities may be selected on the basis of local organizational preferences and experience, consistent with the national regulatory requirements. Due to the costs involved, the potential complexity of technical and environmental considerations, and the need to ensure adequate performance of any required decay storage arrangements, the process of selecting the optimized liquid effluent management option may be complex. This is especially true in countries with limited liquid radioactive effluent generation, limited practical experience and inadequate resources. This publication is intended for decision makers in countries generating radioactive effluents in the areas of medicine, education, research and industry with non-nuclear power applications. It provides guidance and information on how to implement and optimize their radioactive effluent management practices and describes methodologies, criteria and options for the selection of appropriate technology for the discharge of liquid radioactive effluents into the sewer system. The report reviews both technical and non-technical factors important for decision making and planning, and for the implementation of the most appropriate process design for effluent discharges at the country and facility levels. It makes practical recommendations for the selection of decay storage arrangements for different scales of radioactive effluent generation.

Management of Discharge of Low Level Liquid Radioactive Waste Generated in Medical, Educational, Research and Industrial Facilities

International Nuclear Information System (INIS)

2013-07-01

benefit from the information in this publication, particularly with respect to design optimization for decay tanks or guidance provided on quality assurance arrangements. The most appropriate management option for the country and for individual facilities may be selected on the basis of local organizational preferences and experience, consistent with the national regulatory requirements. Due to the costs involved, the potential complexity of technical and environmental considerations, and the need to ensure adequate performance of any required decay storage arrangements, the process of selecting the optimized liquid effluent management option may be complex. This is especially true in countries with limited liquid radioactive effluent generation, limited practical experience and inadequate resources. This publication is intended for decision makers in countries generating radioactive effluents in the areas of medicine, education, research and industry with non-nuclear power applications. It provides guidance and information on how to implement and optimize their radioactive effluent management practices and describes methodologies, criteria and options for the selection of appropriate technology for the discharge of liquid radioactive effluents into the sewer system. The report reviews both technical and non-technical factors important for decision making and planning, and for the implementation of the most appropriate process design for effluent discharges at the country and facility levels. It makes practical recommendations for the selection of decay storage arrangements for different scales of radioactive effluent generation

Assessing the Factors Associated With Iran's Intra-Industry Trade in Pharmaceuticals.

Science.gov (United States)

Yusefzadeh, Hassan; Hadian, Mohammad; Abolghasem Gorji, Hassan; Ghaderi, Hossein

2015-03-30

Pharmaceutical industry is a sensitive and profitable industry. If this industry wants to survive, it should be able to compete well in international markets. So, study of Iran's intra-industry trade (IIT) in pharmaceuticals is essential in order to identify competitiveness potential of country and boost export capability in the global arena. This study assessed the factors associated with Iran's intra-industry trade in pharmaceuticals with the rest of the world during the 2001-2012 periods using seasonal time series data at the four-digit SITC level. The data was collected from Iran's pharmaceutical Statistics, World Bank and International Trade Center. Finally, we discussed a number of important policy recommendations to increase Iran's IIT in pharmaceuticals. The findings indicated that economies of scale, market structure and degree of economic development had a significantly positive impact on Iran's intra-industry trade in pharmaceuticals and tariff trade barriers were negatively related to IIT. Product differentiation and technological advancement didn't have the expected signs. In addition, we found that Iran's IIT in pharmaceuticals have shown an increasing trend during the study period. Thus, the composition of Iran trade in pharmaceuticals has changed from inter-industry trade to intra-industry trade. In order to get more prepared for integration into the global economy, the development of Iran's IIT in pharmaceuticals should be given priority. Therefore, paying attention to IIT could have an important role in serving pharmaceutical companies in relation to pharmaceutical trade.

Assessment of industrial energy options based on coal and nuclear systems

International Nuclear Information System (INIS)

Anderson, T.D.; Bowers, H.I.; Bryan, R.H.; Delene, J.G.; Hise, E.C.; Jones, J.E. Jr.; Klepper, O.H.; Reed, S.A.; Spiewak, I.

1975-07-01

Industry consumes about 40 percent of the total primary energy used in the United States. Natural gas and oil, the major industrial fuels, are becoming scarce and expensive; therefore, there is a critical national need to develop alternative sources of industrial energy based on the more plentiful domestic fuels--coal and nuclear. This report gives the results of a comparative assessment of nuclear- and coal-based industrial energy systems which includes technical, environmental, economic, and resource aspects of industrial energy supply. The nuclear options examined were large commercial nuclear power plants (light-water reactors or high-temperature gas-cooled reactors) and a small [approximately 300-MW(t)] special-purpose pressurized-water reactor for industrial applications. Coal-based systems selected for study were those that appear capable of meeting environmental standards, especially with respect to sulfur dioxide; these are (1) conventional firing using either low- or high-sulfur coal with stack-gas scrubbing equipment, (2) fluidized-bed combustion using high-sulfur coal, (3) low- and intermediate-Btu gas, (4) high-Btu pipeline-quality gas, (5) solvent-refined coal, (6) liquid boiler fuels, and (7) methanol from coal. Results of the study indicated that both nuclear and coal fuel can alleviate the industrial energy deficit resulting from the decline in availability of natural gas and oil. However, because of its broader range of application and relative ease of implementation, coal is expected to be the more important substitute industrial fuel over the next 15 years. In the longer term, nuclear fuels could assume a major role for supplying industrial steam. (U.S.)

Greener corona discharge for enhanced wind generation with a simple dip-coated carbon nanotube decoration

Science.gov (United States)

Wu, Yishan; Li, Jun; Ye, Jianchun; Chen, Xiaohong; Li, Huili; Huang, Sumei; Zhao, Ran; Ou-Yang, Wei

2017-10-01

Corona discharge-induced wind (CDIW) has been widely utilized in production lines in the food and semiconductor industries and in indoor devices such as electrostatic precipitators. Some ozone is inevitably emitted, posing serious health risks to respiratory system and lung function of a human being. In this work, a greener corona discharge with enhanced wind generation for a needle-to-cylinder discharge structure is demonstrated using a simple dip-coating method to attach carbon nanotubes (CNTs) to the discharge electrode of a stainless steel needle. Compared with a conventional discharge electrode without CNT decoration, the velocity of the CDIW is greatly enhanced, the onset voltage is lowered, the energy conversion efficiency is greatly improved and the concentration of generated ozone is much reduced, making this easy method of CNT decoration a promising candidate for greener corona discharge systems. In addition, several impact factors for improved performance are discussed mathematically and phenomenologically, providing an insight into the corona discharge and wind generation.

Greener corona discharge for enhanced wind generation with a simple dip-coated carbon nanotube decoration

International Nuclear Information System (INIS)

Wu, Yishan; Ye, Jianchun; Chen, Xiaohong; Li, Huili; Huang, Sumei; Zhao, Ran; Ou-Yang, Wei; Li, Jun

2017-01-01

Corona discharge-induced wind (CDIW) has been widely utilized in production lines in the food and semiconductor industries and in indoor devices such as electrostatic precipitators. Some ozone is inevitably emitted, posing serious health risks to respiratory system and lung function of a human being. In this work, a greener corona discharge with enhanced wind generation for a needle-to-cylinder discharge structure is demonstrated using a simple dip-coating method to attach carbon nanotubes (CNTs) to the discharge electrode of a stainless steel needle. Compared with a conventional discharge electrode without CNT decoration, the velocity of the CDIW is greatly enhanced, the onset voltage is lowered, the energy conversion efficiency is greatly improved and the concentration of generated ozone is much reduced, making this easy method of CNT decoration a promising candidate for greener corona discharge systems. In addition, several impact factors for improved performance are discussed mathematically and phenomenologically, providing an insight into the corona discharge and wind generation. (paper)

The effects of industrial and agricultural activity on the water quality of the Sitnica River (Kosovo

Directory of Open Access Journals (Sweden)

Albona Shala

2015-07-01

Full Text Available An important issue in Kosovo is water pollution. The use of polluted water has a direct impact on human health and cause long-term consequences. The longest and most polluted river in Kosovo is the Sitnica, a 90 km long river with its source located near the village of Sazli. The river flows into the Ibar River in Northern Kosovo. Agriculture is prevailing activity in the basin of Sitnica which is why agricultural as well as industrial waste are the biggest water pollutants. The purpose of this study was to evaluate water quality of the river and analyse the pollution level along the Sitnica River caused by agricultural activities and industrial discharges. In order to assess the impact of pollutants on this river, a measurements were carried out in four (five monitoring stations: the first station represents the reference station which has not undergone or has not been affected by polluting pressures, two stations in water areas affected by the irrigation of farming land and two monitoring stations in water areas affected by industrial wastewater discharge. Some of the parameters of water quality analysed are temperature, turbidity, electrical conductivity, pH, DO, COD, BOD, P total, nitrates, sulfates, and heavy metals iron, manganese, zinc, nickel. Compared to the reference station the results obtained from the Gracka and Pestova monitoring stations prove that the dominant form of pollution is that from agricultural lands irrigation, while the Plemetin and Mitrovica stations show that the Sitnica River is affected by wastewater discharge which contains significant concentrations of heavy metals, as well as metal ions selected in this paper. It can be concluded that the irrigation of agricultural lands and discharges from mining significantly affect water quality of the Sitnica River.

The effects of industrial and agricultural activity on the water quality of the Sitnica River (Kosovo

Directory of Open Access Journals (Sweden)

Albona Shala

2015-01-01

Full Text Available An important issue in Kosovo is water pollution. The use of polluted water has a direct impact on human health and cause long-term consequences. The longest and most polluted river in Kosovo is the Sitnica, a 90 km long river with its source located near the village of Sazli. The river flows into the Ibar River in Northern Kosovo. Agriculture is prevailing activity in the basin of Sitnica which is why agricultural as well as industrial waste are the biggest water pollutants. The purpose of this study was to evaluate water quality of the river and analyse the pollution level along the Sitnica River caused by agricultural activities and industrial discharges. In order to assess the impact of pollutants on this river, a measurements were carried out in four (five monitoring stations: the first station represents the reference station which has not undergone or has not been affected by polluting pressures, two stations in water areas affected by the irrigation of farming land and two monitoring stations in water areas affected by industrial wastewater discharge. Some of the parameters of water quality analysed are temperature, turbidity, electrical conductivity, pH, DO, COD, BOD, P total, nitrates, sulfates, and heavy metals iron, manganese, zinc, nickel. Compared to the reference station the results obtained from the Gracka and Pestova monitoring stations prove that the dominant form of pollution is that from agricultural lands irrigation, while the Plemetin and Mitrovica stations show that the Sitnica River is affected by wastewater discharge which contains significant concentrations of heavy metals, as well as metal ions selected in this paper. It can be concluded that the irrigation of agricultural lands and discharges from mining significantly affect water quality of the Sitnica River.

A management scheme for reducing pollution at air discharge facility in advance

Energy Technology Data Exchange (ETDEWEB)

Kong, Sung Yong; Lee, Shin Chul [Korea Environment Institute, Seoul (Korea)

1998-12-01

The developed countries are implementing a policy minimizing damage from environmental pollution by reducing discharge in advance as well as the aftermath of a pollutant. The typical example is to use BAT (Best Available Technology). This is to prevent environmental damage by reducing the discharge of pollutants with available technology and to secure environmental margin to enable industrial activities of future generation. Therefore, the feasibility of introducing BAT requirement system was reviewed by considering foreign examples and Korean situation. 38 refs., 8 figs., 69 tabs.

Environmental impact assessment of different design schemes of an industrial ecosystem

International Nuclear Information System (INIS)

Singh, Aditi; Lou, Helen H.; Yaws, Carl L.; Hopper, Jack R.; Pike, Ralph W.

2007-01-01

Industrial ecosystem is an important approach for sustainable development. In an industrial ecosystem, a group of industries are inter-connected through mass and energy exchanges for mutual benefits. However, some mass and energy exchange activities may cause unexpected environmental impacts. Therefore, it is vital to evaluate the environmental impacts of the symbiosis in order to provide a clear guidance for the decision-makers and stakeholders. The agro-chemical complex in the Lower Mississippi River Corridor with thirteen chemical and petrochemical industries emits huge amount of carbon dioxide. A bi-level design methodology is used to reconfigure this complex for utilizing surplus carbon dioxide. By using a superstructure-based approach, a new design scheme for this industrial ecosystem is proposed. In this paper, an LCA-type environmental impact assessment of different design schemes for this complex is conducted using the software TRACI, a tool developed by the United States Environmental Protection Agency (USEPA). This analysis compares various environmental impacts of different designs and identifies the potential trade-offs in different environmental impact categories. This information provides deep insight about the environmental sustainability of industrial ecosystems and facilitates the development of the most eco-effective symbiosis for recycle, reuse and resource conservation. (author)

Assessing and managing health and environmental risks from energy and other complex industrial systems

International Nuclear Information System (INIS)

1988-03-01

There is a growing awareness that it is necessary to identify, assess, and manage the risks of energy and other complex industrial activities in order to minimize their potential to harm public health and the environment. Therefore, quantitative risk analysis with emphasis on risk management has become an important aspect in high level decision making for regulation in developed and developing countries. The International Atomic Energy Agency (IAEA), the United Nations Environment Programme (UNEP) and the World Health Organization (WHO) have initiated a project to promote the use of risk assessment and risk management in environmental health and safety decision making throughout the world. A meeting was held in Paris, France on October 13-17, 1986. The purpose of the meeting was to: a) Discuss the state of the art of national and international experience in conducting case studies in the field of assessing and managing industrial risks from energy and other complex industrial systems either at the plant level or in highly industrialized areas within a country; b) Present and discuss planned regional risk management case studies within a country or international research projects on risk management to be implemented in the future; and c) Review the Project Document on ''Assessing, Controlling, and Managing Health and Environmental Risks from Energy and Other Complex Industrial Systems''. The full texts, together with abstracts, of the papers given at the meeting are presented. The summary reviews briefly some of the major points that arose in papers or in the ensuing discussions. Where a consensus view resulted, conclusions were drawn. Major differences of opinion are also noted

Effects of vaginal discharge on female sexual function.

Science.gov (United States)

Gungor, Ayse N C; Uludag, Aysegul; Sahin, Melih; Gencer, Meryem; Uysal, Ahmet

2014-01-01

To assess the effects of vaginal discharge on female sexual dysfunction (FSD) by using the Female Sexual Function Index (FSFI). In a study at a university hospital in Canakkale, Turkey, women affected by vaginal discharge and age-matched healthy control women were recruited between January and December 2012. Women were grouped in accordance with their vaginal discharge complaints and each participant completed the FSFI questionnaire. A total of 114 women were included in the study. Women in the first group (n=58) had no vaginal discharge or had physiologic vaginal discharge, those in the second group (n=29) had abnormal vaginal discharge with itching, and those in the third group (n=27) had abnormal vaginal discharge without itching. Compared with the first group, women in the second and third groups had higher FSFI scores for desire, arousal, orgasm, and pain, in addition to higher overall FSFI scores. Women with genital malodor had significantly higher FSFI scores than patients without genital malodor (23.83 ± 5.07 vs 21.15 ± 4.78; P=0.008). Women with abnormal vaginal discharges were found to have better FSFI scores for some domains. This finding may be attributed to the adverse effects of sexual intercourse on vaginal infections. © 2013.

National economic models of industrial water use and waste treatment. [technology transfer

Science.gov (United States)

Thompson, R. G.; Calloway, J. A.

1974-01-01

The effects of air emission and solid waste restrictions on production costs and resource use by industry is investigated. A linear program is developed to analyze how resource use, production cost, and waste discharges in different types of production may be affected by resource limiting policies of the government. The method is applied to modeling ethylene and ammonia plants at the design stage. Results show that the effects of increasingly restrictive wastewater effluent standards on increased energy use were small in both plants. Plant models were developed for other industries and the program estimated effects of wastewater discharge policies on production costs of industry.

Using a life cycle assessment methodology for the analysis of two treatment systems of food-processing industry wastewaters

DEFF Research Database (Denmark)

Maya Altamira, Larisa; Schmidt, Jens Ejbye; Baun, Anders

2007-01-01

criteria involve sludge disposal strategies and electrical energy consumption. However, there is a need to develop a systematic methodology to quantify relevant environmental indicators; comprising information of the wastewater treatment system in a life cycle perspective. Also, to identify which...... are the parameters that have the greatest influence on the potential environmental impacts of the systems analyzed. In this study, we present a systematic methodology for the analysis of the operation of two modern wastewater treatment technologies: Biological removal of nitrogen and organic matter by activated...... sludge (Scenario 1), and anaerobic removal of organic matter by a continuous stirred tank reactor (Scenario 2). Both technologies were applied to wastewater coming from a fish meals industry and a pet food industry discharging about 250 to 260 thousand cubic meters of wastewater per year. The methodology...

A pilot study to investigate the impacts of agro-food discharges on a domestic WWTP

International Nuclear Information System (INIS)

Fernandez, F. J.; Villasenor, J.; Rodriguez, L.

2009-01-01

The approval of Directive 91/271CE, which limits the concentration of nutrients (N and P) in treated wastewater discharges, has led to majority of WWTP in Europe to work with nutrient removal processes. These WWTP for BNR are usually optimized to remove nutrients for domestic wastewater, but in some cases a significant discharge of industrial wastewater can modify the influent wastewater composition. (Author)

Estimating sediment discharge: Appendix D

Science.gov (United States)

Gray, John R.; Simões, Francisco J. M.

2008-01-01

different types of bed-load samplers may not be comparable (Gray et al. 1991; Childers 1999; Edwards and Glysson 1999). The total suspended solids (TSS) analytical method tends to produce concentration data from open-channel flows that are biased low with respect to their paired suspended-sediment concentration values, particularly when sand-size material composes more than about a quarter of the material in suspension. Instantaneous sediment-discharge values based on TSS data may differ from the more reliable product of suspended- sediment concentration values and the same water-discharge data by an order of magnitude (Gray et al. 2000; Bent et al. 2001; Glysson et al. 2000; 2001). An assessment of data comparability and reliability is an important first step in the estimation of sediment discharges. There are two approaches to obtaining values describing sediment loads in streams. One is based on direct measurement of the quantities of interest, and the other on relations developed between hydraulic parameters and sediment- transport potential. In the next sections, the most common techniques for both approaches are briefly addressed.

Light and Light Sources High-Intensity Discharge Lamps

CERN Document Server

Flesch, Peter G

2006-01-01

Light and Light Sources gives an introduction to the working principles of high-intensity discharge (HID) lamps and points out challenges and problems associated with the development and operation of HID lamps. The state-of-the-art in electrode and plasma diagnostics as well as numerical methods used for the understanding of HID lamps are described. This volume addresses students as well as scientists and researchers at universities and in industry.

Progress of environmental management and risk assessment of industrial chemicals in China.

Science.gov (United States)

Wang, Hong; Yan, Zhen-Guang; Li, Hong; Yang, Ni-Yun; Leung, Kenneth M Y; Wang, Yi-Zhe; Yu, Ruo-Zhen; Zhang, Lai; Wang, Wan-Hua; Jiao, Cong-Ying; Liu, Zheng-Tao

2012-06-01

With China's rapid economic growth, chemical-related environmental issues have become increasingly prominent, and the environmental management of chemicals has garnered increased attention from the government. This review focuses on the current situation and the application of risk assessment in China's environmental management of industrial chemicals. The related challenges and research needs of the country are also discussed. The Chinese government promulgated regulations for the import and export of toxic chemicals in 1994. Regulations for new chemical substances came into force in 2003, and were revised in 2010 based on the concept of risk management. In order to support the implementation of new regulations, Guidance for Risk Assessment of Chemicals is under development in an attempt to provide the concepts and techniques of risk assessment. With increasing concern and financial support from Chinese government, China is embarking on the fast track of research and development in environmental management of industrial chemicals. Copyright © 2011 Elsevier Ltd. All rights reserved.

Proceedings of the symposium on assessing the industrial hygiene monitoring needs for the coal conversion and oil shale industries

Energy Technology Data Exchange (ETDEWEB)

White, O. Jr. (ed.)

1979-03-01

This work was supported by the United States Department of Energy, Division of Biomedical and Environmental Research, Analysis and Assessment Program, through the Safety and Environmental Protection Division at Brookhaven National Laboratory. The symposium program included presentations centering around the themes: Recognition of Occupational Health Monitoring Requirements for the Coal Conversion and Oil Shale Industries and Status of Dosimetry Technology for Occupational Health Monitoring for the Coal Conversion and Oil Shale Industries. Sixteen papers have been entered individually into EDB and ERA; six had been entered previously from other sources. (LTN)

Predicting the environmental risks of radioactive discharges from Belgian nuclear power plants.

Science.gov (United States)

Vandenhove, H; Sweeck, L; Vives I Batlle, J; Wannijn, J; Van Hees, M; Camps, J; Olyslaegers, G; Miliche, C; Lance, B

2013-12-01

An environmental risk assessment (ERA) was performed to evaluate the impact on non-human biota from liquid and atmospheric radioactive discharges by the Belgian Nuclear Power Plants (NPP) of Doel and Tihange. For both sites, characterisation of the source term and wildlife population around the NPPs was provided, whereupon the selection of reference organisms and the general approach taken for the environmental risk assessment was established. A deterministic risk assessment for aquatic and terrestrial ecosystems was performed using the ERICA assessment tool and applying the ERICA screening value of 10 μGy h(-1). The study was performed for the radioactive discharge limits and for the actual releases (maxima and averages over the period 1999-2008 or 2000-2009). It is concluded that the current discharge limits for the Belgian NPPs considered do not result in significant risks to the aquatic and terrestrial environment and that the actual discharges, which are a fraction of the release limits, are unlikely to harm the environment. Copyright © 2013 Elsevier Ltd. All rights reserved.

A national approach to the regulation of water discharge from uranium mines

International Nuclear Information System (INIS)

Willis, J.L.

1985-09-01

This paper is concerned with outlining the development of a national approach to the regulation of water discharge from uranium mines in Australia. The history of the Australian uranium industry is briefly sketched to illustrate the changes that have taken place in environmental management, and more particularly water management, over this period. The main focus of the paper is on the requirements relating to the establishment of effluent discharge limits contained in the Code of Practice on the Management of Radioactive Wastes from the Mining and Milling of Radioactive Ores, 1982. The code adopts a site specific approach to the formulation of discharge limits rather than providing generic recommendations. This approach requires the application of a rigorous and disciplined methodology

Nipple Discharge

Science.gov (United States)

... any unexpected nipple discharge evaluated by a doctor. Nipple discharge in men under any circumstances could be a problem and needs further evaluation. One or both breasts may produce a nipple discharge, either spontaneously or when you squeeze your ...

Lung surgery - discharge

Science.gov (United States)

... Lung biopsy - discharge; Thoracoscopy - discharge; Video-assisted thoracoscopic surgery - discharge; VATS - discharge ... milk) for 2 weeks after video-assisted thoracoscopic surgery and 6 to 8 weeks after open surgery. ...

Assessment of management alternatives for LWR wastes. Volume 5. Assessment of the radiological impact to the public resulting from discharges of radioactive effluents

International Nuclear Information System (INIS)

Centner, B.

1993-01-01

This report deals with the assessment of the radiological impact to the public resulting from discharges of radioactive effluents (liquid and gaseous) in connection with the implementation of the Belgian scenario for the management of PWR waste. Both individual and collective doses have been estimated for a critical group of the population living around the nuclear power plants concerned. This study is part of an overall theoretical exercise aimed at evaluating a selection of management wastes for LWR waste based on economical and radiological criteria

[Operative guidelines for the shoe industry: risk assessment and environmental hygiene].

Science.gov (United States)

Paraluppi, Paolo

2012-01-01

Considering the most relevant factors for occupational safety and health, the Safety Check application in the footwear industry makes little and medium size factories employers able to carry out risk assessment. However, in specific cases, it is necessary to achieve an in-depth evaluation.

A practical assessment of aquifer discharge for regional groundwater demand by characterizing leaky confined aquifer overlain on a Mesozoic granitic gneiss basement

Science.gov (United States)

Shih, David Ching-Fang

2018-04-01

Due to increasing population worldwide, there is an urgent need to manage these important but diminishing groundwater resources efficiently to ensure their continued availability. The major innovative design of this study is to provide a practical assessment process for groundwater discharge under a regional demand by characterizing the nature of leaky confined aquifers overlain on a Mesozoic granitic gneiss basement which involves the important groundwater system in the Kinmen region (Taiwan, ROC) and the assessment of adoptable groundwater discharge in aquifer is needed. The storage coefficient presents an order of one in a thousand and hydraulic conductivity is approximately at the order of 1-8 m/d and 0.4-0.9 m/d for aquifer and aquitard respectively. Groundwater discharge and admissible number of pumping well is suggested considering scheduled maximum groundwater volume and head decline change for eastern and western studied area respectively. The safety subjected to the conservative issue is then addressed by the use of scheduled maximum groundwater volume. It reveals that the safety can be ensured using the indicator as scheduled maximum groundwater volume with predefined scenarios. The result can be utilized practically for developing management strategy of groundwater resources due to the applicability and novel of method.

Assessment of wastewater treatment facility compliance with decreasing ammonia discharge limits using a regression tree model.

Science.gov (United States)

Suchetana, Bihu; Rajagopalan, Balaji; Silverstein, JoAnn

2017-11-15

A regression tree-based diagnostic approach is developed to evaluate factors affecting US wastewater treatment plant compliance with ammonia discharge permit limits using Discharge Monthly Report (DMR) data from a sample of 106 municipal treatment plants for the period of 2004-2008. Predictor variables used to fit the regression tree are selected using random forests, and consist of the previous month's effluent ammonia, influent flow rates and plant capacity utilization. The tree models are first used to evaluate compliance with existing ammonia discharge standards at each facility and then applied assuming more stringent discharge limits, under consideration in many states. The model predicts that the ability to meet both current and future limits depends primarily on the previous month's treatment performance. With more stringent discharge limits predicted ammonia concentration relative to the discharge limit, increases. In-sample validation shows that the regression trees can provide a median classification accuracy of >70%. The regression tree model is validated using ammonia discharge data from an operating wastewater treatment plant and is able to accurately predict the observed ammonia discharge category approximately 80% of the time, indicating that the regression tree model can be applied to predict compliance for individual treatment plants providing practical guidance for utilities and regulators with an interest in controlling ammonia discharges. The proposed methodology is also used to demonstrate how to delineate reliable sources of demand and supply in a point source-to-point source nutrient credit trading scheme, as well as how planners and decision makers can set reasonable discharge limits in future. Copyright © 2017 Elsevier B.V. All rights reserved.

The Export Trading Company Act of 1982 and the photovoltaics industry: An assessment

Science.gov (United States)

Enfield, S.; Laporta, C.

1983-01-01

The potential advantages of recent export promotion legislation for the U.S. photovoltaics industry were assessed. The provisions of the Export Trading Company Act of 1982 were reviewed and the export trade sector was surveyed to determine what impact the Act is haviang on export company activity. The photovoltaics industry was then studied to determine whether the Act offers particular advantages for promoting its product overseas.

Comparative life cycle assessment of industrial multi-product processes

OpenAIRE

Jung, Johannes

2014-01-01

The demand for environmentally safe industrial processes is increasing. Therefore, environmental impacts of new processes have to be examined at an early stage. A method for analyzing environmental impacts is life cycle assessment (LCA). A major trouble of LCA are multi-functionality problems. Multi-functionality problems can be fixed using alternative methods such as system expansion, avoided burden and allocation. Each of the three methods requires choices by the LCA-practitioner. The choic...

A practical method for the maintainability assessment in industrial devices using indicators and specific attributes

International Nuclear Information System (INIS)

Moreu De Leon, Pedro; González-Prida Díaz, Vicente; Barberá Martínez, Luis; Crespo Márquez, Adolfo

2012-01-01

The objective of this paper is to describe a procedure to obtain maintainability indicators for industrial devices. This analysis can be helpful, among other cases, to compare systems, to achieve a better design regarding maintainability requirements, to improve this maintainability under specific industrial environment and to foresee maintainability problems due to eventual changes in a device operation conditions. This maintainability assessment can be carried out at any stage of the industrial asset life cycle. With this purpose, this work first introduces the notion of maintainability and the implementation of assessment indicators, including some important requirements to perform that. Then, a brief literature review is presented, including the definition of the main concepts, which are later used in the paper. After studying the maintenance levels and the maintainability attributes, both terms are linked, leading all this analysis to the assessment of the maintainability indicators. It follows a discussion about the information obtained through the maintainability assessment process and its computation into several maintainability indicators. The paper includes a case study, which implements the defined assessment into a practical scenario. Finally, the work concludes summarizing the more significant aspects and suggesting future researches.

Plutonium discharges to the sanitary sewer: Health impacts at the Livermore Water Reclamation Plant

International Nuclear Information System (INIS)

Balke, B.K.

1993-01-01

The Lawrence Livermore National Laboratory (LLNL) is the largest discharger of sewage treated by the Livermore Water Reclamation (LWRP), contributing approximately 7% by volume of the LWRP influent LILNL operations, as potential sources both of industrial pollutants and radioactivity, are therefore of particular concern to the LWRP. For this reason, LLNL has maintained vigorous wastewater discharge control and monitoring programs. In particular, the monitoring program has demonstrated that, except in a few rare instances, the concentration of contaminants in LLNL effluent have always remained below the appropriate regulatory standards. The exceptions have generally been due to inadvertent discharges of metals-bearing solutions produced by metal plating or cleaning operations

Safe discharge: an irrational, unhelpful and unachievable concept

OpenAIRE

Goodacre, S

2006-01-01

Emergency doctors often decide whether to advise hospital admission or discharge by assessing whether a decision to discharge home is considered safe. This implies that hospital admission may be recommended on the basis of exceeding an arbitrarily defined risk of adverse outcome, rather than weighing the potential benefits, risks and costs of hospital admission. This approach is likely to lead to irrational decision making, unnecessary hospitalisation and unrealistic expectations regarding ri...

Using non-local databases for the environmental assessment of industrial activities: The case of Latin America

International Nuclear Information System (INIS)

Osses de Eicker, Margarita; Hischier, Roland; Hurni, Hans; Zah, Rainer

2010-01-01

Nine non-local databases were evaluated with respect to their suitability for the environmental assessment of industrial activities in Latin America. Three assessment methods were considered, namely Life Cycle Assessment (LCA), Environmental Impact Assessment (EIA) and air emission inventories. The analysis focused on data availability in the databases and the applicability of their international data to Latin American industry. The study showed that the European EMEP/EEA Guidebook and the U.S. EPA AP-42 database are the most suitable ones for air emission inventories, whereas the LCI database Ecoinvent is the most suitable one for LCA and EIA. Due to the data coverage in the databases, air emission inventories are easier to develop than LCA or EIA, which require more comprehensive information. One strategy to overcome the limitations of non-local databases for Latin American industry is the combination of validated data from international databases with newly developed local datasets.

High-power CO laser with RF discharge for isotope separation employing condensation repression

Science.gov (United States)

Baranov, I. Ya.; Koptev, A. V.

2008-10-01

High-power CO laser can be the effective tool in such applications as isotope separation using the free-jet CRISLA method. The way of transfer from CO small-scale experimental installation to industrial high-power CO lasers is proposed through the use of a low-current radio-frequency (RF) electric discharge in a supersonic stream without an electron gun. The calculation model of scaling CO laser with RF discharge in supersonic stream was developed. The developed model allows to calculate parameters of laser installation and optimize them with the purpose of reception of high efficiency and low cost of installation as a whole. The technical decision of industrial CO laser for isotope separation employing condensation repression is considered. The estimated cost of laser is some hundred thousand dollars USA and small sizes of laser head give possibility to install it in any place.

Application of predictive modelling techniques in industry: from food design up to risk assessment.

Science.gov (United States)

Membré, Jeanne-Marie; Lambert, Ronald J W

2008-11-30

In this communication, examples of applications of predictive microbiology in industrial contexts (i.e. Nestlé and Unilever) are presented which cover a range of applications in food safety from formulation and process design to consumer safety risk assessment. A tailor-made, private expert system, developed to support safe product/process design assessment is introduced as an example of how predictive models can be deployed for use by non-experts. Its use in conjunction with other tools and software available in the public domain is discussed. Specific applications of predictive microbiology techniques are presented relating to investigations of either growth or limits to growth with respect to product formulation or process conditions. An example of a probabilistic exposure assessment model for chilled food application is provided and its potential added value as a food safety management tool in an industrial context is weighed against its disadvantages. The role of predictive microbiology in the suite of tools available to food industry and some of its advantages and constraints are discussed.

Sequential method for the assessment of innovations in computer assisted industrial processes

International Nuclear Information System (INIS)

Suarez Antola R.

1995-01-01

A sequential method for the assessment of innovations in industrial processes is proposed, using suitable combinations of mathematical modelling and numerical simulation of dynamics. Some advantages and limitations of the proposed method are discussed. tabs

TECHNIQUE OF AN ASSESSMENT OF COMPETITIVENESS OF THE ENTERPRISES OF THE FURNITURE INDUSTRY

Directory of Open Access Journals (Sweden)

Vitaliy A. Zhigarev

2015-01-01

Full Text Available The purpose of this article is the description of an author’s technique of an assessment of competitiveness of the enterprises of the furniture industry which mainobjective is the economic assessment ofproduction efficiency of production of thefurniture enterprise, an assessment ofthe intra firm making production efficiencyof furniture, identification of the factors influencing overall performance of thefurniture enterprise.

Assessment of the effect of effluent discharge from coffee refineries ...

African Journals Online (AJOL)

The ecohydrological quality of water resource of Ethiopia is declining at an alarming rate, resulting in severe environmental degradation. This study finds out the effects of effluent discharge from intensive coffee refineries on river water quality based on physicochemical parameters and benthos assemblages as biological ...

Control assessment for heat integrated systems. An industrial case study for ethanol recovery

DEFF Research Database (Denmark)

Mauricio Iglesias, Miguel; Huusom, Jakob Kjøbsted; Sin, Gürkan

2013-01-01

Heat integration is essential for reducing the energy consumption of process industries. However, it may render the dynamic operation more interactive and difficult to control. This paper assesses the implications of heat integration in controllability and performance in energy reduction....... The assessment, both on open loop and closed loop, was carried out based on an industrial case study and compared to a modified case without heat integration. Although the heat integrated system displayed a certain deterioration of controllability, the control system made possible an efficient operation....... The reduction of energy consumption achieved thanks to heat integration was considerably larger than the losses due to poor control of the process, confirming the importance of heat integration in energy intensive processes....

United Nuclear Industries, Inc. reactor and fuel production facilities 1975 environmental release report

International Nuclear Information System (INIS)

Cucchiara, A.L.

1976-01-01

During calendar year 1975, an estimated total of 3,000,000 pounds of waste materials and approximately 150 curies of radionuclides were discharged to the environs in liquid effluent streams emanating from United Nuclear Industries, Inc., operated facilities. During the same period, approximately 1,700,000 pounds of reported waste materials, including 34,000 curies of reported radionuclides, were discharged to the atmosphere from United Nuclear Industries, Inc., operated facilities. Superscript numbers reference explanatory notes contained at the end of the report

A holistic model for the selection of environmental assessment indicators to assess the impact of industrialization on indigenous health.

Science.gov (United States)

Kryzanowski, Julie A; McIntyre, Lynn

2011-01-01

Mainstream environmental assessment (EA) methodologies often inadequately address health, social and cultural impacts of concern for Canadian indigenous communities affected by industrialization. Our objective is to present a holistic, culturally-appropriate framework for the selection of indigenous health indicators for baseline health assessment, impact prediction, or monitoring of impacts over time. We used a critical population health approach to explore the determinants of health and health inequities in indigenous communities and conceptualize the pathways by which industrialization affects these determinants. We integrated and extended key elements from three indigenous health frameworks into a new holistic model for the selection of indigenous EA indicators. The holistic model conceptualizes individual and community determinants of health within external social, economic and political contexts and thus provides a comprehensive framework for selecting indicators of indigenous health. Indigenous health is the product of interactions among multiple determinants of health and contexts. Potential applications are discussed using case study examples involving indigenous communities affected by industrialization. Industrialization can worsen indigenous health inequities by perpetuating the health, social and cultural impacts of historic environmental dispossession. To mitigate impacts, EA should explicitly recognize linkages between environmental dispossession and the determinants of health and health inequities and meaningfully involve indigenous communities in the process.

Vessel Sewage Discharges: No-Discharge Zones (NDZs)

Science.gov (United States)

States may petition the EPA to establish areas, called no discharge zones (NDZs), where vessel sewage discharges are prohibited. This page describes how NDZs are designated, the types of designations, who enforces them, and how to comply.

CO2 valorization by means of Dielectric Barrier Discharge

Science.gov (United States)

Machrafi, H.; Cavadias, S.; Amouroux, J.

2011-01-01

As atmospheric pollution is causing several environmental problems it is incumbent to reduce the impact of pollution on the environment. One particular problem is the production of CO2 by many transport and industrial applications. Instead of stocking CO2 and instead of being a product, it can be used as a source. The case considered is the CO2 reformation of methane producing hydrogen and CO. It is an endothermic reaction, for which the activation barrier needs to be surpassed. This can be done efficiently by the method of Dielectric Barrier Discharge. The process relies on the collision of electrons, which are accelerated under an electrical field that is created in the discharge area. This leads to the formation of reactive species, which facilitate the abovementioned reaction. This study is performed using a Matlab program with the Reaction Engineering module in COMSOL (with an incorporated kinetic mechanism) in order to model the discharge phase. Then COMSOL (continuity and Navier-Stokes equations) is used to model the flow in the post-discharge phase. The results showed that both a 2D and 3D model can be used to model the chemical-plasma process. These methods need strongly reduced kinetic mechanism, which in some cases can cause loss of precision.

Plasma breakdown in a capacitively-coupled radiofrequency argon discharge

Science.gov (United States)

Smith, H. B.; Charles, C.; Boswell, R. W.

1998-10-01

Low pressure, capacitively-coupled rf discharges are widely used in research and commercial ventures. Understanding of the non-equilibrium processes which occur in these discharges during breakdown is of interest, both for industrial applications and for a deeper understanding of fundamental plasma behaviour. The voltage required to breakdown the discharge V_brk has long been known to be a strong function of the product of the neutral gas pressure and the electrode seperation (pd). This paper investigates the dependence of V_brk on pd in rf systems using experimental, computational and analytic techniques. Experimental measurements of V_brk are made for pressures in the range 1 -- 500 mTorr and electrode separations of 2 -- 20 cm. A Paschen-style curve for breakdown in rf systems is developed which has the minimum breakdown voltage at a much smaller pd value, and breakdown voltages which are significantly lower overall, than for Paschen curves obtained from dc discharges. The differences between the two systems are explained using a simple analytic model. A Particle-in-Cell simulation is used to investigate a similar pd range and examine the effect of the secondary emission coefficient on the rf breakdown curve, particularly at low pd values. Analytic curves are fitted to both experimental and simulation results.

CO2 valorization by means of Dielectric Barrier Discharge

International Nuclear Information System (INIS)

Machrafi, H; Cavadias, S; Amouroux, J

2011-01-01

As atmospheric pollution is causing several environmental problems it is incumbent to reduce the impact of pollution on the environment. One particular problem is the production of CO 2 by many transport and industrial applications. Instead of stocking CO 2 and instead of being a product, it can be used as a source. The case considered is the CO 2 reformation of methane producing hydrogen and CO. It is an endothermic reaction, for which the activation barrier needs to be surpassed. This can be done efficiently by the method of Dielectric Barrier Discharge. The process relies on the collision of electrons, which are accelerated under an electrical field that is created in the discharge area. This leads to the formation of reactive species, which facilitate the abovementioned reaction. This study is performed using a Matlab program with the Reaction Engineering module in COMSOL (with an incorporated kinetic mechanism) in order to model the discharge phase. Then COMSOL (continuity and Navier-Stokes equations) is used to model the flow in the post-discharge phase. The results showed that both a 2D and 3D model can be used to model the chemical-plasma process. These methods need strongly reduced kinetic mechanism, which in some cases can cause loss of precision.

Studies on impact of release of liquid industrial waste from soda ash industry in the nearshore water of north Gujarat

Digital Repository Service at National Institute of Oceanography (India)

Zingde, M.D.

The nearshore waters of Mithapur, Porbandar and Sutrapada received 18-100 mid (million litres per day) of wastewater from soda ash manufacturing industries either through point discharges (Mithapur, Porbandar) or through submarine outfall (Sutrapada...

Biocide usage in cooling towers in the electric power and petroleum refining industries

Energy Technology Data Exchange (ETDEWEB)

Veil, J.; Rice, J.K.; Raivel, M.E.S.

1997-11-01

Cooling towers users frequently apply biocides to the circulating cooling water to control growth of microorganisms, algae, and macroorganisms. Because of the toxic properties of biocides, there is a potential for the regulatory controls on their use and discharge to become increasingly more stringent. This report examines the types of biocides used in cooling towers by companies in the electric power and petroleum refining industries, and the experiences those companies have had in dealing with agencies that regulate cooling tower blowdown discharges. Results from a sample of 67 electric power plants indicate that the use of oxidizing biocides (particularly chlorine) is favored. Quaternary ammonia salts (quats), a type of nonoxidizing biocide, are also used in many power plant cooling towers. The experience of dealing with regulators to obtain approval to discharge biocides differs significantly between the two industries. In the electric power industry, discharges of any new biocide typically must be approved in writing by the regulatory agency. The approval process for refineries is less formal. In most cases, the refinery must notify the regulatory agency that it is planning to use a new biocide, but the refinery does not need to get written approval before using it. The conclusion of the report is that few of the surveyed facilities are having any difficulty in using and discharging the biocides they want to use.

Radiological assessment of NORM industries in Ireland-radiation doses to workers and members of the public

International Nuclear Information System (INIS)

Organo, C.; Fenton, D.

2008-12-01

only those industries with potential NORM issues were first published by the European Commission in 1997 and were followed by more specific guidance documents covering particular aspects of NORM: building materials, remediation of contaminated sites, NORM effluents and discharges, waste types produced by industries dealing with special metal and ceramics and NORM waste management and treatment options. Countries located outside Europe may follow and/or implement the International Atomic Energy Agency (IAEA) Safety Standards requirements. As far as the identification of work activities involving NORM is concerned, the IAEA has equally produced a number of important and very helpful documents in the recent years, complementary to those published by the EC which capture the essential aspects of the approach advocated by the IAEA to identify NORM industries. Four large industries operating in Ireland and dealing with NORM were prioritised and investigated to determine the level of radiation to which workers and members of the public were exposed as a result of their work practices: the peat-fired power production, the coal-fired power production, the extraction of natural gas and the bauxite refining for the production of alumina. In each case, a thorough examination of the industrial process has been carried out to identify the potential radiation exposure situations arising from the occurrance of NORM at the different stages of the respective process. At the core of our assessment methodology, the following aspects were targeted. The potential for enhancement of radionuclide concentrations above their natural levels in products, by-products, residues and waste. Their availability to be released into the biosphere, due to physicochemical changes during processing or due to the method used to manage the residues and the waste produced. Occupational radiation doses were estimated based on field measurements and analysis of samples collected onsite. For particular scenarios

Investigations of electropositive and electronegative RF discharges

International Nuclear Information System (INIS)

Bryant, P.M.

2000-01-01

Electronegative RF discharges are extensively used in the semi-conductor industry for material processing. Despite this the subject of electronegative RF discharges has been largely neglected. The aim of this thesis is to investigate a RF oxygen discharge by mass/energy spectrometry, a retarding field analyser and an actively compensated Langmuir probe. Measurements are also obtained in argon for comparison. In this thesis pure oxygen will be used as this has relatively simple discharge chemistry with most of the rate constants well known. Ion energy analysis (Chapter 3) show the discharge to contract into the centre of the chamber at low pressures in both gases. The expected thinner peak of the oxygen ion energy distribution was not observed, this is shown to be due to RF modulation of the positive ions with collisions playing a role. The dominant positive ion in the discharge bulk and colliding in the sheath in oxygen was found to be O 2 + with less than 10% O + over the range of pressure investigated (Chapter 4). Various minor ions such as O 3 + and O 4 + were also observed. By actively compensating a Langmuir probe for the first three plasma harmonics it is shown that it is unnecessary to compensate when the amplitude of a given harmonic is comparable to the electron temperature (Chapter 5). A study of Langmuir probe measurements in argon (Chapter 7) has shown that the use of the collisionless Alien, Boyd and Reynolds theory leads to discrepancies in the measured electron densities. The correct density can be obtained by using the perturbation method of Shih and Levi, this corrects for ion-neutral collisions in electropositive plasmas only. This theory is extended to electronegative plasmas (Chapter 6) so that measurements of the negative ion density obtained from the collisionless theory of Arnemiya, Annaratone and Alien can be corrected. Langmuir probe measurements in oxygen indicate a peak in the negative ion density at around 3Pa and are found to be in good

DOEZOR2: a code to assess the radiological impact of effluent discharges

International Nuclear Information System (INIS)

Martin Garcia, J.E.; Gomez Rodriguez, C.A.; Gimeno Blesa, M.E.; GARCIA ACOSTA, F.

2010-01-01

DOEZOR2 (DOsis al Exterior en ZORita v. 2) comprises a suite of models and data management tools which can be used to perform the radiological impact assessments of routine and continuous discharges from nuclear power plants and nuclear fuel cycle facilities for regulatory purposes. The Code is based on Radiation Protection 72 and the Regulatory Guide 1.109 (USNRC) methodology. The code development was carried out by SOCOIN (Gas Natural Fenosa Group) and is implemented in Jose Cabrera NPP (or Zorita NPP). DOEZOR has been operating during ten years and is about to be updated in order to consider realistic doses methodology. The new software differs from its predecessor in a number of ways, including a new user interface, new radionuclides and several new capacities (realistic dose). The model is developed to estimate radiological consequences of emissions from nuclear power plants. Internal exposure via inhalation and ingestion, external exposure from clouds and radioactivity deposited on the ground are included in the model. DOEZOR2 has been developed in Visual Fortran, using user friendly windows environment and modular architecture (easy to implement for other uses and installations). The main features of the code include: - Annual discharge to the atmospheric or river environment can be modelled. - Dynamic systems dispersion of radionuclides released to the river (two reservoirs). - A comprehensive list of exposure pathways. - A suite of environmental transfer models to estimate the transfer of radionuclides through the environment. - Site specific data (parameters of life habits). - Results in terms of individual doses (three age's groups), using effective dose as defined in Council Directive 96/29/EURATOM and dose coefficients from U.S. Federal Guidance Report 13. - Results in 'MS Word form' for periodic information to authorities. This software could be implemented anywhere, considering the particular characteristic of the site for the plant or facility

Is the aquatic environment sufficiently protected from chemicals discharged with treated ballast water from vessels worldwide? - A decadal environmental perspective and risk assessment.

Science.gov (United States)

David, Matej; Linders, Jan; Gollasch, Stephan; David, Jan

2018-05-24

Ballast water managements systems (BWMS) installed on vessels may use active substances to inactivate or kill organisms in the ballast water. This paper provides new insights in this global issue - discharge of hazardous disinfection by-products with ballast water and related risk assessment for the environment. Considering the possible extent of this issue, the International Maritime Organization (IMO) engaged the Joint Group of Experts on the Scientific Aspects of Marine Environmental Protection (GESAMP)-Ballast Water Working Group (BWWG) to oversee the evaluation process of BWMS that make use of active substances to prevent negative effects. We analysed all BWMS that received IMO final approval over a decade until 2017 and provide an overview of active substances used for ballast water treatment and disinfection by-products in the discharged ballast water. A risk assessment was conducted using the GESAMP-BWWG methodology for two very different commercial ports (Koper, Slovenia and Hamburg, Germany). Some relevant chemicals (chloropicrin, monochloroacetic acid, and dibromoacetonitrile) and other chemicals (isocyanuric acid and sodium thiosulphate) reached levels of concern, indicating a risk for aquatic organisms after discharge of that ballast water. From this analysis, it became clear GESAMP-BWWG worst-case scenario assumptions do not fully account for the potential environmental risks. We provide recommendations how to make this risk assessment more robust, recommend further research, and urge for policy as well as regulatory responses. Copyright © 2018 Elsevier Ltd. All rights reserved.

Integrated assessment of exergy, energy and carbon dioxide emissions in an iron and steel industrial network

International Nuclear Information System (INIS)

Wu, Junnian; Wang, Ruiqi; Pu, Guangying; Qi, Hang

2016-01-01

Highlights: • Exergy, energy and CO_2 emissions assessment of iron and steel industrial network. • Effects of industry symbiosis measures on exergy, energy and CO_2 emissions. • Exploring the environmental impact from exergy losses. • The overall performance indexes are proposed for iron and steel industrial network. • Sinter strand and the wet quenching process have the lowest exergy efficiency. - Abstract: Intensive energy consumption and high pollution emissions in the iron and steel industry have caused problems to the energy system, in the economy, and in the environment. Iron and steel industrial network as an example of energy conservation and emissions reduction, require better analysis and assessment. The present study comprehensively assesses an iron and steel industrial network and its environmental performance with respect to exergy, energy and CO_2 emissions. The results show that the sinter strand needs to be greatly improved and the wet quenching process needs to be completely redesigned. The overall exergy efficiency and energy efficiency can be improved by adopting industrial symbiosis (IS) measures. We found that adjusting the energy structure to use renewable energy and recycling solid waste can greatly reduce CO_2 emissions. Moreover, the maximum exergy losses occurred in the blast furnace with the maximum CO_2 emissions. The iron making plant exerted a strong effect on the environment based on the equivalent CO_2 emission potentials. Many performance indicators of the entire industrial network were also examined in this work. It can be seen that integrated evaluation of energy and CO_2 emissions with exergy is necessary to help to mitigate adverse environmental impacts and more effectively fulfill the goals for energy conservation and emissions reduction.

Generic models for use in assessing the impact of discharges of radioactive substances to the environment

International Nuclear Information System (INIS)

2001-01-01

The concern of society in general for the quality of the environment and the realization that all human activities have some environmental effect has led to the development of a procedure for environmental impact analysis. This procedure is a predictive one, which forecasts probable environmental effects before some action, such as the construction and operation of a nuclear power station, is decided upon. The method of prediction is by the application of models that describe the environmental processes in mathematical terms in order to produce a quantitative result which can be used in the decision making process. This report describes such a procedure for application to radioactive discharges and is addressed to the national regulatory bodies and technical and administrative personnel responsible for performing environmental impact analyses. The report is also intended to support the recently published IAEA Safety Guide on Regulatory Control of Radioactive Discharges to the Environment. It expands on and supersedes previous advice published in IAEA Safety Series No. 57 on Generic Models and Parameters for Assessing the Environmental Transfer of Radionuclides from Routine Releases. This Safety Report was developed through a series of consultants meetings and three Advisory Group Meetings

Ozone Generation in Dry Air Using Pulsed Discharges With and Without a Solid Dielectric Layer

OpenAIRE

Samaranayake, W.J.M.; Miyahara, Y.; Namihira, T.; Katsuki, S.; Hackam, R.; Akiyama, H.; ミヤハラ, Y.; ナミヒラ, タカオ; カツキ, スナオ; アキヤマ, ヒデノリ; 浪平, 隆男; 勝木, 淳; 秋山, 秀典

2001-01-01

Energy efficient generation of ozone is very important because ozone is being used increasingly in a wide range of industrial applications. Ozonizers usually use dielectric barrier discharges and employ alternating current (ac) with consequent heat generation, which necessitates cooling. In the present study, very short duration pulsed voltage is employed resulting in reduced heating of the gas and discharge reactor. A comparison of ozone generation in dry air using a coaxial concentric elect...

Environmental impacts assessment of industrial estate providing with managerial process

Energy Technology Data Exchange (ETDEWEB)

Nouri, J.; Mahvi, A.H.; Younesian, M.; Nabizadeh, R.; Hashemi, I. [Univ. of Tehran (Iran)

2007-07-01

The existence of balance, coordination and required order among natural elements is one of the key factors in the ecosystem. If this balance is disturbed under certain circumstances, it will damage the structure of living existences and more specifically human beings. Since a half century ago, factors such as important economical and industrial activites, advanced technologies together with growing population and lack of concordance among different couhntries to take optimal advantage of the existing natural resources have distrubed the balance in the ecosystem. As a result, man has caused many problems such as high death tolls and arduous diseases due to the different pollutions in water, air, land, sound, temperature, etc and factors such as erosion, desert, expansion, floods, extinction of plant and animal species, ozone layer destruction, global warming, sea level rise and greenhouse gases increase. Environmental Impact Assessment (EIA) is to recognize and assess systematic consequences of projects and programs on elements like physicochemical, biological, cultural, economical and social phenomena in th environment; in other words it is a way or method to determine the direction of predication and assessment of environmental impacts of activities on the environmental health of the ecosystem affecting human lives. In this study, and environmental impact assessment of the establishment of the Shahzand Industrial Estate in Arak at the central part of Iran was investigated. After collection of data and analysis of the findings, the positive and negative impacts resulting from establishment of the indutrial estate were investigated using the Leopold Matrix and Scaling checklist methods providing the managerial solutions in order to minimize the harmful environmental impacts. The existing environmental situation was investigated and then environmental impact alternatives were determined. This was done in regard to the amount and kind of predicted pollution for the

The reduction of radioactive discharges from Sellafield

International Nuclear Information System (INIS)

Horsley, D.M.C.

1990-01-01

This paper outlines the continuing efforts of British Nuclear Fuels to reduce the levels of discharges from the Sellafield site. Emphasis is placed on two plants: the Site Ion Exchange Effluent Plant (SIXEP), commissioned in 1985 and the Enhanced Actinide Removal Plant (EARP), programmed to be commissioned in 1991. The content matter deals with process and engineering concepts developed to solve problems peculiar to the nuclear industry but will be of interest to any organization faced with the processing, control and containment of hazardous media. (author)

Nested-scale discharge and groundwater level monitoring to improve predictions of flow route discharges and nitrate loads

NARCIS (Netherlands)

Velde, Y. van der; Rozemeijer, J.C.; Rooij, G.H.de; Geer, F.C. van; Torfs, P.J.J.F.; Louw, P.G.B. de

2010-01-01

Identifying effective measures to reduce nutrient loads of headwaters in lowland catchments requires a thorough understanding of flow routes of water and nutrients. In this paper we assess the value of nested-scale discharge and groundwater level measurements for predictions of catchment-scale

78 FR 70307 - Guidance for Industry: Preclinical Assessment of Investigational Cellular and Gene Therapy...

Science.gov (United States)

2013-11-25

...] Guidance for Industry: Preclinical Assessment of Investigational Cellular and Gene Therapy Products... Assessment of Investigational Cellular and Gene Therapy Products'' dated November 2013. The guidance document... products reviewed by the Office of Cellular, Tissue and Gene Therapies (OCTGT). The product areas covered...

Inhibition of the nitrification process in municipal wastewater treatment plants by industrial discharges

DEFF Research Database (Denmark)

Grüttner, Henrik; Winther-Nielsen, M.; Jorgensen, L.

1994-01-01

of inhibitory substances are to be found among the industries, and that nearly all of the industries investigated exhibited some kind of inhibitory effect. Further, is was demonstrated that the toxic unit calculation might be used in the quantification of the sources, and that the observed effects could...... be explained by the chemical substances in the wastewater from the industries. Based on the above described results, a strategy for control of the inhibitory effects at the different levels of the catchment area was suggested....

The impact of industries on surface water quality of River Ona and ...

African Journals Online (AJOL)

Samples of water from two rivers (River Ona and River Alaro) in Oluyole ... were higher in the industrial zones than those found in the upstream of both rivers. ... Key words: River Ona, River Alaro, industrial discharges, surface water quality.

Assessment of the Relationship between Andean Ice Core Precipitation Indicators and Amazon River Discharge

Science.gov (United States)

Johnson, N.; Alsdorf, D.; Thompson, L.; Mosley-Thompson, E.; Melack, J.

2006-12-01

Prior to the last 100 years, there is a significant lack of hydrologic knowledge for the Amazon Basin. A 100- year record of discharge from the city of Manaus, located at the confluence of the Solimoes and Negro rivers, is the most complete record for the basin. Inundated wetlands play a key role in carbon out-gassing to the atmosphere whereas discharge from the Amazon River contributes about 20% of the total freshwater flux delivered to the world's oceans. As discharge (Q) and inundation are directly related to precipitation, we are developing a method to extend our understanding of Q and inundation into the 19^{th} century. Using proxy data preserved in Andean glaciers and ice caps and recovered from ice cores, annually resolved histories of δ^{18)O and mass accumulation are available. The latter is a proxy for local precipitation amount whereas δ18O is influenced by continental scale processes (i.e., evaporation, convection) as well as by temperature and hence, by varying climate regimes. We have correlated the accumulation and δ18O records from Core 1 drilled on the Quelccaya ice-cap in the southern Andes of Peru with the Manaus discharge data. As ice core annual layers correspond to the thermal year (in Peru, July to June of the following year) and the discharge records are kept daily (January to December), we averaged 365 days of Q data seeking the optimal correlation for each start and end date. The best statistical relationship between δ18O and Q (r = -0.41, p = < 0.001) is attained when Q is averaged from March 16 to March 15 of the following year. We also correlated 23 years of ENSO events, which are linked to both Amazon River discharge and ice core δ18O (r = -0.60, p = < 0.001). These linear relationships are used to create Amazon discharge for the 20^{th} century and to extrapolate Q into the 19^{th} century. Previously developed relationships between Q and mainstem inundated area are then used to estimate inundated area along the main Amazon

Assessment of risk of potential exposures on facilities industries; Estimativa do risco de exposicao potencial em instalacoes industriais

Energy Technology Data Exchange (ETDEWEB)

Leocadio, Joao Carlos

2007-03-15

This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10{sup -2} per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

Assessment of risk of potential exposures on facilities industries; Estimativa do risco de exposicao potencial em instalacoes industriais

Energy Technology Data Exchange (ETDEWEB)

Leocadio, Joao Carlos

2007-03-15

This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10{sup -2} per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

[A critical assessment of the relation between the food industry and health research].

Science.gov (United States)

León Mengíbar, Josep; Pastor-Valero, María; Hernández Aguado, Ildefonso

To describe the influence of the food industry in health research, observing how funding influences health outcomes and the quality of the studies. We performed a systematic review in MEDLINE, Cochrane Library Plus and Scopus using the MESH "Food Industry", "Food-Processing Industry", "Biomedical Research", "Research Support as Topic", and the keywords "Industry Sponsorship" and "Funding Source". The quality was assessed using the PRISMA guidelines. We revised 1,506 articles and 10 were included; two reviewed the relationship between funding-outcomes and quality-outcomes; six focused on the funding-outcomes relationship; and the other two focused on methodological quality. Six showed that funding from the food industry resulted in more favourable outcomes for their products. No differences in quality were found in relation to the funding source, but those which did not declare their funding had a worse quality. Studies funded by the food industry showed favourable results for their products. However, this fact did not affect the quality of the studies. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

In situ and laboratory bioassays to evaluate the impact of effluent discharges on receiving aquatic ecosystems

International Nuclear Information System (INIS)

Smolders, R.; Bervoets, L.; Blust, R.

2004-01-01

Effluents are a main source of direct and often continuous input of pollutants into aquatic ecosystems with long-term implications on ecosystem functioning. Therefore, the study of the effects of effluent exposure on organisms, populations or communities within the framework of impact assessment has a high ecological relevance. The aim of this study was to assess the toxicological impact of two effluents, one household wastewater treatment effluent (Effluent 1) and one industrial effluent (Effluent 2), on the receiving aquatic ecosystem using two test species under both in situ and laboratory conditions. Zebra mussel (Dreissena polymorpha) and common carp (Cyprinus carpio) were exposed under laboratory conditions in an online monitoring flow-through system (receiving different concentrations of Effluent 2) and under in situ conditions along the pollution gradient established by these two effluent discharges. Bioassays focussed on growth and condition related endpoints (i.e. condition, growth, lipid budget), since these are key functional processes within organisms and populations. Under laboratory conditions, increasing concentrations of the industrial effluent (Effluent 2) had a negative effect on both zebra mussel and carp energy reserves and condition. Under in situ conditions, the same negative impact of Effluent 2 was observed for zebra mussels, while Effluent 1 had no apparent effect on exposed zebra mussels. Carp growth and condition, on the other hand, were significantly increased at the discharge sites of both effluents when compared to the reference site, probably due to differences in food availability. The results indicate that a combination of in situ and laboratory exposures can illustrate how ecological processes influence bioassay studies. The incorporation of indirect, ecological effects, like changes in food availability, provides considerable benefit in understanding and predicting effects of effluents on selected species under realistic exposure

In situ and laboratory bioassays to evaluate the impact of effluent discharges on receiving aquatic ecosystems

Energy Technology Data Exchange (ETDEWEB)

Smolders, R. [Laboratory for Ecophysiology, Biochemistry and Toxicology, University of Antwerp (RUCA), Groenenborgerlaan 171, B-2020 Antwerp (Belgium)]. E-mail: roel.smolders@ua.ac.be; Bervoets, L. [Laboratory for Ecophysiology, Biochemistry and Toxicology, University of Antwerp (RUCA), Groenenborgerlaan 171, B-2020 Antwerp (Belgium); Blust, R. [Laboratory for Ecophysiology, Biochemistry and Toxicology, University of Antwerp (RUCA), Groenenborgerlaan 171, B-2020 Antwerp (Belgium)

2004-11-01

Effluents are a main source of direct and often continuous input of pollutants into aquatic ecosystems with long-term implications on ecosystem functioning. Therefore, the study of the effects of effluent exposure on organisms, populations or communities within the framework of impact assessment has a high ecological relevance. The aim of this study was to assess the toxicological impact of two effluents, one household wastewater treatment effluent (Effluent 1) and one industrial effluent (Effluent 2), on the receiving aquatic ecosystem using two test species under both in situ and laboratory conditions. Zebra mussel (Dreissena polymorpha) and common carp (Cyprinus carpio) were exposed under laboratory conditions in an online monitoring flow-through system (receiving different concentrations of Effluent 2) and under in situ conditions along the pollution gradient established by these two effluent discharges. Bioassays focussed on growth and condition related endpoints (i.e. condition, growth, lipid budget), since these are key functional processes within organisms and populations. Under laboratory conditions, increasing concentrations of the industrial effluent (Effluent 2) had a negative effect on both zebra mussel and carp energy reserves and condition. Under in situ conditions, the same negative impact of Effluent 2 was observed for zebra mussels, while Effluent 1 had no apparent effect on exposed zebra mussels. Carp growth and condition, on the other hand, were significantly increased at the discharge sites of both effluents when compared to the reference site, probably due to differences in food availability. The results indicate that a combination of in situ and laboratory exposures can illustrate how ecological processes influence bioassay studies. The incorporation of indirect, ecological effects, like changes in food availability, provides considerable benefit in understanding and predicting effects of effluents on selected species under realistic exposure

Assessment of postur in an automotive industry using ISO -11228-3 technique

Directory of Open Access Journals (Sweden)

2012-01-01

Results: Results shown in 4 workstations include 35 task in an automotive industry. One of them is red and another’s are green.. Conclusion: This method is suitable, quickly and very easy to use for assessment of ergonomics situation in work.

Lean assessment for manufacturing of small and medium enterprises (SMEs: A case study of electronics industry in the Northeast of Thailand

Directory of Open Access Journals (Sweden)

Chanchai Laoha

2015-09-01

Full Text Available This research was aimed at assessing for manufacturing a small and medium enterprise of electronic industry case study in the Northeast of Thailand. Electronic industry produces integrated circuits products (IC. We use lean assessment tools with 14 lean technique and tools. The value of lean assessment are scoring system derived from the malcolm baldrige national quality award, the two-dimensioned scoring system composing of the process; approach, deployment, learning, and integration. There are reveal operations of each of lean techniques and tools, and the performance; the 0 - 4 level needed to be improved in depth and hence would reflect operations requiring sustainable outcomes. This lean assessment is a systematic approach, assessor come to sit, examine operations from a lean perspective and assessed the situation as prior. The purposes of this visit were to introduced to production or factory manager or window person of SMEs who gave assessor a tour of the plant. Assessor also got a chance to explain lean assessment criteria on the shop floor. Assessor selects a value streaming line that produce most goods or main production line to assess. Assessor takes 1 day to assess and discuss the lean assessment. As a result, the lean assessment survey should be adjusted to fit the systems adaptively. Three plants of electronic industries were leanness of 1.06 or 26%. Five plants of garment industry were leanness of 1.13 or 28%. Four plants of shoe industry were leanness of 1.39 or 34%. Shoe industry had high leanness all unless quick changeover and multi skill. The quick changeover and multi skill were high score on garment industry. Electronics industry has not the lead but second in visual management, 5s, operation base layout, quick changeover, multi skill, standard operation procedures, and policy deployment.

Health technology assessment and comparative effectiveness research: a pharmaceutical industry perspective.

Science.gov (United States)

Hao, Yanni; Thomas, Adrian

2013-08-01

We briefly review the characteristics of several established health technology assessment (HTA) programs in industrialized societies including Germany, the UK and France. Special attention is paid on two issues: the position of HTA in coverage decision making and the role of economic assessment in evaluation processes. Although law makers in the USA have barred the use of NICE's cost/quality-adjusted life year or similar health economics approaches by public payers for coverage decision making, there are suggestions of prioritizing relative efficacy evaluation over economic assessment under a comparative effectiveness research (CER) framework to inform payment rates of public payers (an approach similar to German and French HTA processes). However, such an approach is unlikely to prove viable. It should also be noted that, if cost considerations are made explicit in US CER policy decisions, CER may become an unsustainable approach undermined by a conflicting emphasis on both cost containment and a demand for costly comparative evidence. On the other hand, properly designed CER initiatives can serve as a facilitator of more efficient research activities and drug development models. With these points in mind, the likely pathway of US CER is explored and the plausible impact on industry innovation is discussed.

Chemical Industry Waste water Treatment

International Nuclear Information System (INIS)

Nasr, F.A.; Doma, H.S.; El-Shafai, S.A.; Abdel-HaJim, H.S.

2004-01-01

Treatment of chemical industrial wastewater from building and construction chemicals factory and plastic shoes manufacturing factory was investigated. The two factories discharge their wastewater into the public sewerage network. The results showed the wastewater discharged from the building and construction chemicals factory was highly contaminated with organic compounds. The average values of COD and BOD were 2912 and 150 mg O 2 /l. Phenol concentration up to 0.3 mg/l was detected. Chemical treatment using lime aided with ferric chloride proved to be effective and produced an effluent characteristics in compliance with Egyptian permissible limits. With respect to the other factory, industrial wastewater was mixed with domestic wastewater in order to lower the organic load. The COD, BOD values after mixing reached 5239 and 2615 mg O 2 /l. The average concentration of phenol was 0.5 mg/l. Biological treatment using activated sludge or rotating biological contactor (RBe) proved to be an effective treatment system in terms of producing an effluent characteristic within the permissible limits set by the law

State waste discharge permit application for cooling water and condensate discharges

Energy Technology Data Exchange (ETDEWEB)

Haggard, R.D.

1996-08-12

The following presents the Categorical State Waste Discharge Permit (SWDP) Application for the Cooling Water and Condensate Discharges on the Hanford Site. This application is intended to cover existing cooling water and condensate discharges as well as similar future discharges meeting the criteria set forth in this document.

Assessment of land allotment support power industry in Grati, Pasuruan Regency

Science.gov (United States)

Muzaqqi, M. A. R.

2017-06-01

The industrial sector is always in need of land for factory as well as other supporting facilities, on the other side of the ability of the environment (support) the uneven terrain of every area in favor of intensive activities such as industry. Land uses that are not adapted to the support power, will cause pollution, damage, disaster and loss that generally uses the environment. The purpose of this research was to assess the resources support neighborhood Grati district associated with the existence of a plan to build an industrial area in accordance with the direction of Grati utilization of space in the spatial plan of the Pasuruan Regency area. In this study of land carrying capacity power comparison capability and land use. The Analysis technique used is the technique of overlay with analysis tools namely software using the software Arcgis 10.1. The parameters of the ability of land-adapted to the characteristics of the land for industry, namely the slope the slope ranges 0-25% on the slope of 25-45% can be developed with industry improvement area contours, and on a slope above 45% not allocated as an industrial area, the type of soil that is not easy slopes, the intensity of the rain of less than 3000 mm, potential landslide and flood-prone lowlands. Each parameter will be provided scoring between 1-5. Score of 1 was given to the condition of land the most harm, and a score of 5 is given for the condition of the land which supports most of the location industry. The result scoring is divided in 5 clases those are bad (5-9), is bad (9.1-13), medium (13.1), good (17,1-9) and good (21.1-25). The need for industrial land, calculated from the vast land of existing industries. Based on research results, obtained the ability to land on the area of research has 3 classes of 5 classes, i.e. good, moderate and bad. The results of the comparison between the broad capabilities and the needs of the farm industry, it can be concluded that the power of the land to support

Industrial waste needs assessment. Phase 1

International Nuclear Information System (INIS)

Radel, R.J.; Willis, M.P.

1993-10-01

In January of 1992 a team was put together to begin the process of assessing the industrial waste needs of the Tennessee Valley. The team consisted of representatives from the various TVA Resource Group organizations. This initial team recommended as a starting point in the process a two-phase market research effort. A second team was then commissioned to conduct the first phase of this market research effort. The first phase of that marketing effort is now complete. This report contains an analysis of the data obtained through interviews of more than 168 individuals representing a similar number of organizations. A total of 37 TVA Resource Group employees were involved in the contact process from various organizations. In addition, the appendices provide summaries of the data used in designing the process and the reports of the Contact Coordinators (who were responsible for a series of visits). As a result of the data analysis, the Review Team makes the following recommendations: 1. Publish this report and distribute to the new management within TVA Resource Group as well as to all those participating as contacts, visitors, and contact coordinators. 2. The Resource Group management team, or management teams within each of the respective organizations within Resource Group, appoint Phase 2 assessement teams for as many of the problem areas listed in Table III as seem appropriate. We further recommend that, where possible, cross-organizational teams be used to examine individual problem areas. 3. Make this report available within Generating and Customer Groups, especially to the Customer Service Centers. 4. Establish a process to continue follow up with each of the contacts made in this assessment

Industrial waste needs assessment. Phase 1

Energy Technology Data Exchange (ETDEWEB)

Radel, R.J.; Willis, M.P. [eds.

1993-10-01

In January of 1992 a team was put together to begin the process of assessing the industrial waste needs of the Tennessee Valley. The team consisted of representatives from the various TVA Resource Group organizations. This initial team recommended as a starting point in the process a two-phase market research effort. A second team was then commissioned to conduct the first phase of this market research effort. The first phase of that marketing effort is now complete. This report contains an analysis of the data obtained through interviews of more than 168 individuals representing a similar number of organizations. A total of 37 TVA Resource Group employees were involved in the contact process from various organizations. In addition, the appendices provide summaries of the data used in designing the process and the reports of the Contact Coordinators (who were responsible for a series of visits). As a result of the data analysis, the Review Team makes the following recommendations: 1. Publish this report and distribute to the new management within TVA Resource Group as well as to all those participating as contacts, visitors, and contact coordinators. 2. The Resource Group management team, or management teams within each of the respective organizations within Resource Group, appoint Phase 2 assessement teams for as many of the problem areas listed in Table III as seem appropriate. We further recommend that, where possible, cross-organizational teams be used to examine individual problem areas. 3. Make this report available within Generating and Customer Groups, especially to the Customer Service Centers. 4. Establish a process to continue follow up with each of the contacts made in this assessment.

On the electrodynamics of partial discharges in voids in solid dielectrics

DEFF Research Database (Denmark)

Pedersen, Aage

1989-01-01

It is suggested that a correct interpretation of partial-discharge transients can be obtained only through the concept of induced charge. The application of this concept enables a partial-discharge theory to be developed by means of which the influence of relevant void parameters can be assessed ...

Elimination of liquid discharge to the environment from the TA-50 Radioactive Liquid Waste Treatment Facility

International Nuclear Information System (INIS)

Moss, D.; Williams, N.; Hall, D.; Hargis, K.; Saladen, M.; Sanders, M.; Voit, S.; Worland, P.; Yarbro, S.

1998-06-01

Alternatives were evaluated for management of treated radioactive liquid waste from the radioactive liquid waste treatment facility (RLWTF) at Los Alamos National Laboratory. The alternatives included continued discharge into Mortandad Canyon, diversion to the sanitary wastewater treatment facility and discharge of its effluent to Sandia Canyon or Canada del Buey, and zero liquid discharge. Implementation of a zero liquid discharge system is recommended in addition to two phases of upgrades currently under way. Three additional phases of upgrades to the present radioactive liquid waste system are proposed to accomplish zero liquid discharge. The first phase involves minimization of liquid waste generation, along with improved characterization and monitoring of the remaining liquid waste. The second phase removes dissolved salts from the reverse osmosis concentrate stream to yield a higher effluent quality. In the final phase, the high-quality effluent is reused for industrial purposes within the Laboratory or evaporated. Completion of these three phases will result in zero discharge of treated radioactive liquid wastewater from the RLWTF

Elimination of liquid discharge to the environment from the TA-50 Radioactive Liquid Waste Treatment Facility

Energy Technology Data Exchange (ETDEWEB)

Moss, D.; Williams, N.; Hall, D.; Hargis, K.; Saladen, M.; Sanders, M.; Voit, S.; Worland, P.; Yarbro, S.

1998-06-01

Alternatives were evaluated for management of treated radioactive liquid waste from the radioactive liquid waste treatment facility (RLWTF) at Los Alamos National Laboratory. The alternatives included continued discharge into Mortandad Canyon, diversion to the sanitary wastewater treatment facility and discharge of its effluent to Sandia Canyon or Canada del Buey, and zero liquid discharge. Implementation of a zero liquid discharge system is recommended in addition to two phases of upgrades currently under way. Three additional phases of upgrades to the present radioactive liquid waste system are proposed to accomplish zero liquid discharge. The first phase involves minimization of liquid waste generation, along with improved characterization and monitoring of the remaining liquid waste. The second phase removes dissolved salts from the reverse osmosis concentrate stream to yield a higher effluent quality. In the final phase, the high-quality effluent is reused for industrial purposes within the Laboratory or evaporated. Completion of these three phases will result in zero discharge of treated radioactive liquid wastewater from the RLWTF.

The transition mechanism from a symmetric single period discharge to a period-doubling discharge in atmospheric helium dielectric-barrier discharge

International Nuclear Information System (INIS)

Zhang, Dingzong; Wang, Yanhui; Wang, Dezhen

2013-01-01

Period-doubling and chaos phenomenon have been frequently observed in atmospheric-pressure dielectric-barrier discharges. However, how a normal single period discharge bifurcates into period-doubling state is still unclear. In this paper, by changing the driving frequency, we study numerically the transition mechanisms from a normal single period discharge to a period-doubling state using a one-dimensional self-consistent fluid model. The results show that before a discharge bifurcates into a period-doubling state, it first deviates from its normal operation and transforms into an asymmetric single period discharge mode. Then the weaker discharge in this asymmetric discharge will be enhanced gradually with increasing of the frequency until it makes the subsequent discharge weaken and results in the discharge entering a period-doubling state. In the whole transition process, the spatial distribution of the charged particle density and the electric field plays a definitive role. The conclusions are further confirmed by changing the gap width and the amplitude of the applied voltage

The transition mechanism from a symmetric single period discharge to a period-doubling discharge in atmospheric helium dielectric-barrier discharge

Energy Technology Data Exchange (ETDEWEB)

Zhang, Dingzong; Wang, Yanhui; Wang, Dezhen [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China)

2013-06-15

Period-doubling and chaos phenomenon have been frequently observed in atmospheric-pressure dielectric-barrier discharges. However, how a normal single period discharge bifurcates into period-doubling state is still unclear. In this paper, by changing the driving frequency, we study numerically the transition mechanisms from a normal single period discharge to a period-doubling state using a one-dimensional self-consistent fluid model. The results show that before a discharge bifurcates into a period-doubling state, it first deviates from its normal operation and transforms into an asymmetric single period discharge mode. Then the weaker discharge in this asymmetric discharge will be enhanced gradually with increasing of the frequency until it makes the subsequent discharge weaken and results in the discharge entering a period-doubling state. In the whole transition process, the spatial distribution of the charged particle density and the electric field plays a definitive role. The conclusions are further confirmed by changing the gap width and the amplitude of the applied voltage.

Hysterectomy - vaginal - discharge

Science.gov (United States)

Vaginal hysterectomy - discharge; Laparoscopically assisted vaginal hysterectomy - discharge; LAVH - discharge ... you were in the hospital, you had a vaginal hysterectomy. Your surgeon made a cut in your ...

Assessment Of Co60 Industrial Irradiators According To Basic Design Principles

Directory of Open Access Journals (Sweden)

El-Sayed Mohamed El Refaie

2017-04-01

Full Text Available Ensuring safe and easy operation providing relative uniform dose in the product and maximizing radiation utilization are the basic design principles for each Co60 industrial irradiator to maintain radiation safety. The study shows an assessment for four industrial irradiators to determine which active results were been maintained by using basic design principles. Different designs elements of the chosen irradiators have been illustrated and studied. The study shows that IRASM and ROBO industrial irradiators satisfy all basic design principles. IAEA-NR3772 irradiator maintains only two of the three basic design principles due to rotating door. Brevion irradiator satisfies only the principle of relative uniform radiation dose in product. Without affecting radiation safety this study proposes a new design of the irradiator to maximize energy utilization by adding a new track for low density products and also a static irradiation for cultural heritage beside the main track of high density products.

Groundwater Molybdenum from Emerging Industries in Taiwan.

Science.gov (United States)

Tsai, Kuo-Sheng; Chang, Yu-Min; Kao, Jimmy C M; Lin, Kae-Long

2016-01-01

This study determined the influence of emerging industries development on molybdenum (Mo) groundwater contamination. A total of 537 groundwater samples were collected for Mo determination, including 295 samples from potentially contaminated areas of 3 industrial parks in Taiwan and 242 samples from non-potentially contaminated areas during 2008-2014. Most of the high Mo samples are located downstream from a thin film transistor-liquid crystal display (TFT-LCD) panel factory. Mean groundwater Mo concentrations from potentially contaminated areas (0.0058 mg/L) were significantly higher (p industry and following wastewater batch treatment were 0.788 and 0.0326 mg/L, respectively. This indicates that wastewater containing Mo is a possible source of both groundwater and surface water contamination. Nine samples of groundwater exceed the World Health Organization's suggested drinking water guideline of 0.07 mg/L. A non-carcinogenic risk assessment for Mo in adults and children using the Mo concentration of 0.07 mg/L yielded risks of 0.546 and 0.215, respectively. These results indicate the importance of the development of a national drinking water quality standard for Mo in Taiwan to ensure safe groundwater for use. According to the human health risk calculation, the groundwater Mo standard is suggested as 0.07 mg/L. Reduction the discharge of Mo-contaminated wastewater from factories in the industrial parks is also the important task in the future.

Variability in stream discharge and temperature: a preliminary assessment of the implications for juvenile and spawning Atlantic salmon

Directory of Open Access Journals (Sweden)

D. Tetzlaff

2005-01-01

Full Text Available This study focuses on understanding the temporal variability in hydrological and thermal conditions in a small mountain stream and its potential implication for two life stages of Atlantic salmon (Salmo salar – stream resident juveniles and returning adult spawners. Stream discharge and temperature in the Girnock Burn, NE Scotland, were characterised over ten hydrological years (1994/1995–2003/2004. Attention was focussed on assessing variations during particular ecologically 'sensitive' time periods when selected life-stages of salmon behaviour may be especially influenced by hydrological and thermal conditions. Empirical discharge data were used to derive hydraulic parameters to predict the Critical Displacement Velocity (CDV of juvenile salmon. This is the velocity above which fish may no longer be able to hold station in the water column and thus can be used as an index of time periods where feeding behaviour might be constrained. In the Girnock Burn, strong inter- and intra-annual variability in hydrological and thermal conditions may have important implications for feeding opportunities for juvenile fish; both during important growth periods in late winter and early spring, and the emergence of fry in the late spring. Time periods when foraging behaviour of juvenile salmon may be constrained by hydraulic conditions were assessed as the percentage time when CDV for 0+ and 1+ fish were exceeded by mean daily stream velocities. Clear seasonal patterns of CDV were apparent, with higher summer values driven by higher stream temperatures and fish length. Inter-annual variability in the time when mean stream velocity exceeded CDV for 0+ fish ranged between 29.3% (1997/1998 and 44.7% (2000/2001. For 1+ fish mean stream velocity exceeded CDV between 14.5% (1997/1998 and 30.7% (2000/2001 of the time. The movement of adult spawners into the Girnock Burn in preparation for autumn spawning (late October to mid-November exhibited a complex

Blue and grey water footprint of textile industry in China.

Science.gov (United States)

Wang, Laili; Ding, Xuemei; Wu, Xiongying

2013-01-01

Water footprint (WF) is a newly developed idea that indicates impacts of freshwater appropriation and wastewater discharge. The textile industry is one of the oldest, longest and most complicated industrial chains in the world's manufacturing industries. However, the textile industry is also water intensive. In this paper, we applied a bottom-up approach to estimate the direct blue water footprint (WFdir,blue) and direct grey water footprint (WFdir,grey) of China's textile industry at sector level based on WF methodology. The results showed that WFdir,blue of China's textile industry had an increasing trend from 2001 to 2010. The annual WFdir,blue surpassed 0.92 Gm(3)/yr (giga cubic meter a year) since 2004 and rose to peak value of 1.09 Gm(3)/yr in 2007. The original and residuary WFdir,grey (both were calculated based on the concentration of chemical oxygen demand (CODCr)) of China's textile industry had a similar variation trend with that of WFdir,blue. Among the three sub-sectors of China's textile industry, the manufacture of textiles sector's annual WFdir,blue and WFdir,grey were much larger than those of the manufacture of textile wearing apparel, footware and caps sector and the manufacture of chemical fibers sector. The intensities of WFdir,blue and WF(res)dir,grey of China's textile industry were year by year decreasing through the efforts of issuing restriction policies on freshwater use and wastewater generation and discharge, and popularization of water saving and wastewater treatment technologies.

Assessment of the Impact of Radioactive Disposals and Discharges from the United Kingdom Low Level Waste Repository on the Ecosystem

International Nuclear Information System (INIS)

Barber, N.

2009-01-01

This paper describes an assessment of the impacts to ecosystems and wildlife species from radioactive discharges and disposals at the United Kingdom's low level waste disposal facility in West Cumbria. The assessment was undertaken in response to a requirement in the site's current authorisation and comprised a detailed desk based review along with an exercise to screen relevant monitoring data from the site against generic assessment criteria and undertake a numerical risk assessment. Much of the site is vegetated, comprising a variety of habitats including grassland, relict dune heath and surface water bodies. Furthermore, the site is located adjacent to a coastal/estuarine area which is protected as it provides a habitat of high ecological value and species of animals and plants are present that are rare, endangered or vulnerable. However, the current impact of aerial and liquid radioactive discharges from the low level waste repository on ecosystems and wildlife species is considered to be low. Site monitoring data also indicate that there has been a reduction of radionuclide activities in ground and surface water and leachates over time, a result of measures initiated to minimise rainwater infiltration and improve leachate management associated with the disposal area. A quantitative assessment was undertaken to assess future impacts to relevant terrestrial, fresh water and marine ecosystems. This showed that modelled peak radionuclide concentrations in the first 4,000 years after site closure were not sufficiently high to cause potential impact to any of these ecosystems or associated wildlife. This cut-off date was chosen as it is considered probable that, due to the effects of future climate and landscape change and, unless actions are taken to defend the coastline, the site is likely to be disrupted by coastal erosion in the next 4,000 years. (authors)

Assessing Sustainability in Environmental Management: A Case Study in Malaysia Industry

Science.gov (United States)

Turan, Faiz Mohd; Johan, Kartina; Lanang, Wan Nurul Syahirah Wan; Asmanizam, Asmadianatasha

2017-08-01

The scarcity in measuring the sustainability accomplishment has been restrained most of the companies in Malaysian industry. Currently, there are variety types of the measurement tools of the sustainability assessment that have been implemented. However, there are still not achieving the inclusive elements required by the worldwide claim. In fact, the contribution to the sustainability performance are only highlighted on the nature, financial along with society components. In addition, some of the companies are conducting their sustainability implementation individually. By means, this process approaching type is needed to be integrated into a systematic system approach. This paper is focussing on investigating the present sustainability tools in the environmental management system for Malaysian industry prior to the quantification of the sustainability parameters. Hence, the parameters of the sustainability have been evaluated then in order to accomplish this project. By reviewing on the methodology of this research it comprises of three phases where it starts with the analyzation of the parameters in environmental management system according to the Malaysian context of industry. Moving on to the next step is the quantification of the criterion and finally the normalisation process will be done to determine the results of this research either it is succeeded or vice versa. As a result, this research has come to the conclusion where the level of the sustainability compliance does not achieve the standard level of the targeted objectives though it has already surpassed the average level of the sustainability performance. In future, the understanding towards the sustainability assessment is acquired to be aligned unitedly in order to integrated the process approach into the systematic approach. Apart, this research will be able to help to provide a measurable framework yet finally bestowing the Malaysian industry with a continuous improvement roadmap in achieving

Hip fracture - discharge

Science.gov (United States)

... neck fracture repair - discharge; Trochanteric fracture repair - discharge; Hip pinning surgery - discharge ... in the hospital for surgery to repair a hip fracture, a break in the upper part of ...

Assessing the Factors Associated With Iran’s Intra-Industry Trade in Pharmaceuticals

Science.gov (United States)

Yusefzadeh, Hassan; Hadian, Mohammad; Gorji, Hassan Abolghasem; Ghaderi, Hossein

2015-01-01

Background: Pharmaceutical industry is a sensitive and profitable industry. If this industry wants to survive, it should be able to compete well in international markets. So, study of Iran’s intra-industry trade (IIT) in pharmaceuticals is essential in order to identify competitiveness potential of country and boost export capability in the global arena. Methods: This study assessed the factors associated with Iran’s intra-industry trade in pharmaceuticals with the rest of the world during the 2001–2012 periods using seasonal time series data at the four-digit SITC level. The data was collected from Iran’s pharmaceutical Statistics, World Bank and International Trade Center. Finally, we discussed a number of important policy recommendations to increase Iran’s IIT in pharmaceuticals. Results: The findings indicated that economies of scale, market structure and degree of economic development had a significantly positive impact on Iran’s intra-industry trade in pharmaceuticals and tariff trade barriers were negatively related to IIT. Product differentiation and technological advancement didn’t have the expected signs. In addition, we found that Iran’s IIT in pharmaceuticals have shown an increasing trend during the study period. Thus, the composition of Iran trade in pharmaceuticals has changed from inter-industry trade to intra-industry trade. Conclusions: In order to get more prepared for integration into the global economy, the development of Iran’s IIT in pharmaceuticals should be given priority. Therefore, paying attention to IIT could have an important role in serving pharmaceutical companies in relation to pharmaceutical trade. PMID:26156931

EVALUATING THE EFFECT OF INDUSTRIAL EFFLUENTS ON CHEMICAL COMPOSITION OF SOIL IN VILLAGE DINGI, DISTRICT HARIPUR

Directory of Open Access Journals (Sweden)

K. Asghar

2016-08-01

Full Text Available The present report is an outcome of research work conducted in Dingi village, District Haripur in 2012. The research aimed to assess and analyze the effects of industrial effluents on the soil fertility of the village, investigate contributing factors responsible for soil pollution and underlying causes creating the problems. Data analysis revealed that area had problems pertaining to water and soil quality. The key factors affecting soil fertility were the careless discharge of the untreated industrial effluents from Hattar Industrial Estate (HIE into the natural stream passing through village. The results were compared with the soil standards set by the World Wide Fund for Nature (WWF and European Committee Commission (ECC and all of these were exceeding the permissible limits and affecting the soil fertility. The soils were found not fit for agriculture. The investigation highlighted the need to take some effective steps to manage the monitoring program set for checking of industries by the government according to set rules and regulation.

Integrated environmental risk assessment and whole-process management system in chemical industry parks.

Science.gov (United States)

Shao, Chaofeng; Yang, Juan; Tian, Xiaogang; Ju, Meiting; Huang, Lei

2013-04-19

Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on.

Integrated Environmental Risk Assessment and Whole-Process Management System in Chemical Industry Parks

Science.gov (United States)

Shao, Chaofeng; Yang, Juan; Tian, Xiaogang; Ju, Meiting; Huang, Lei

2013-01-01

Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on. PMID:23603866

Integrated Environmental Risk Assessment and Whole-Process Management System in Chemical Industry Parks

Directory of Open Access Journals (Sweden)

Lei Huang

2013-04-01

Full Text Available Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on.

Industrial assessment of nonbackfittable PWR design modifications. Final report

International Nuclear Information System (INIS)

Matzie, R.A.; Daleas, R.S.; Miller, D.D.

1980-11-01

As part of the US Department of Energy's Advanced Reactor Design Study, various nonbackfittable PWR design modifications were evaluated to determine their potential for improved uranium utilization and commercial viability. Combustion Engineering, Inc. contributed to this effort through participation in the Battelle Pacific Northwest Laboratory industrial assessment of such design modifications. Seven modifications, including the use of higher primary system temperatures and pressures, rapid-frequent refueling, end-of-cycle stretchout, core periphery modifications, radial blankets, low power density cores, and small PWR assemblies, were evaluated with respect to uranium utilization, economics, technical and operational complexity, and several other subjective considerations. Rapid-frequent refueling was judged to have the highest potential although it would probably not be economical for the majority of reactors with the design assumptions used in this assessment

Assessing the future of a CSP industry in Morocco

International Nuclear Information System (INIS)

Mahia, Ramon; Arce, Rafael de; Medina, Eva

2014-01-01

This article presents the results of a survey on the feasibility of, and difficulties in, establishing a locally CSP manufacturing industry in Morocco. First, the survey explores which specific components of the CSP production chain could be manufactured in Morocco today and which would require moderate or significant changes being made in that country over the next decade. This paper contributes to demonstrating the potential for a CSP manufacturing industry in Morocco at the present time, ideal business models and current restrictions. Second, on the one hand this survey provides insight into the entrepreneurial, policy- and market-related barriers hampering the development of this industry and, on the other, the relative advantages offered by Morocco for the development of a CSP sector. Complementing the empirical findings on foreign direct investment determinants, this exercise stresses the key relevance of the economic context not only in terms of size, stability and predictability of the market, but also in regard to the critical importance of institutional and policy-related issues such as stability and public policy commitment. The results show that prior experience of firms in developing areas is a crucial issue in the accurate assessment of the risks and benefits associated with FDI decisions. - Highlights: • A CSP industry in Morocco is viable under certain adjustments in the next decade. • Policy related barriers are more critical than entrepreneurial or market obstacles. • It urges to provide a legislative and administrative support for CSP initiatives. • The volume of installed CSP capacity in the region doesn't reach a critical level. • Some foreign investors might have a negative miss perception of Moroccan reality

Assessment of exposure to the Penicillium glabrum complex in cork industry using complementing methods.

Science.gov (United States)

Viegas, Carla; Sabino, Raquel; Botelho, Daniel; dos Santos, Mateus; Gomes, Anita Quintal

2015-09-01

Cork oak is the second most dominant forest species in Portugal and makes this country the world leader in cork export. Occupational exposure to Chrysonilia sitophila and the Penicillium glabrum complex in cork industry is common, and the latter fungus is associated with suberosis. However, as conventional methods seem to underestimate its presence in occupational environments, the aim of our study was to see whether information obtained by polymerase chain reaction (PCR), a molecular-based method, can complement conventional findings and give a better insight into occupational exposure of cork industry workers. We assessed fungal contamination with the P. glabrum complex in three cork manufacturing plants in the outskirts of Lisbon using both conventional and molecular methods. Conventional culturing failed to detect the fungus at six sampling sites in which PCR did detect it. This confirms our assumption that the use of complementing methods can provide information for a more accurate assessment of occupational exposure to the P. glabrum complex in cork industry.

Sustainability needs and practices assessment in the building industry of China

International Nuclear Information System (INIS)

Yang, Pingjian; He, Gang; Mao, Guozhu; Liu, Yong; Xu, Mingzhu; Guo, Huaicheng; Liu, Xi

2013-01-01

The building industry in China has huge potential capacity for energy/resources conservation and pollutants reduction to achieve sustainable development. However, stakeholders are hardly able to reach a consensus on preferential needs and effective solutions, which was a difficulty faced by policy makers. To better identify the common interests on sustainable development in this field, the Sustainability Solutions Navigator (SSN) was adopted in China for the first time to assess the sustainability needs and practices. Based on the participation of stakeholders from the government, businesses, academia, and non-government organizations, prioritized needs and practices were identified using SSN, and gap analyses were conducted for comparison to global benchmarks. According to the results, the top needs were mainly focused on improving government efficiency and implementation, maintaining healthy indoor environments and obtaining adequate funds; priority practices were mainly focused on governmental action, renewable energy development and pollutant source reduction. The gap analysis indicated that the government efficiency and performance had the largest gap to the benchmark. By using a simple interactive tool to bring different stakeholders into policy making process, this study produces all-around information for decision makers. The results imply that the sustainability of the building industry in China has a much better expectation than governmental performance. - Highlights: ► SSN was first used for sustainability assessment in China's building industry. ► Prioritized needs and practices of multiple stakeholders were identified. ► High expectation of improved governmental efforts from the study

Travelling-wave-sustained discharges

International Nuclear Information System (INIS)

Schlueter, Hans; Shivarova, Antonia

2007-01-01

This review is on discharges maintained by travelling waves: new plasma sources, discovered in 1974 and considered as a prototype of the gas discharges according to their definition as nonlinear systems which unify in a self-consistent manner plasmas and fields. In the presentation here of the fluid-plasma models of the diffusion-controlled regime of the travelling-wave-sustained discharges (TWSDs), the basic features of the discharge maintenance-the discharge self-consistency and the electron heating in the high-frequency field-are stressed. Operation of stationary and pulsed discharges, discharge maintenance without and in external magnetic fields as well as discharge production in different gases (argon, helium, helium-argon gas mixtures and hydrogen) are covered. Modulation instability of diffusion-controlled discharges and discharge filamentation at higher gas pressures are also included in the review. Experimental findings which motivate aspects of the reported modelling are pointed out

Ankle replacement - discharge

Science.gov (United States)

... total - discharge; Total ankle arthroplasty - discharge; Endoprosthetic ankle replacement - discharge; Osteoarthritis - ankle ... You had an ankle replacement. Your surgeon removed and reshaped ... an artificial ankle joint. You received pain medicine and were ...

Asthma - child - discharge

Science.gov (United States)

Pediatric asthma - discharge; Wheezing - discharge; Reactive airway disease - discharge ... Your child has asthma , which causes the airways of the lungs to swell and narrow. In the hospital, the doctors and nurses helped ...

Glow discharging device

International Nuclear Information System (INIS)

Maeno, Katsuki; Kawasaki, Kozo; Hiratsuka, Hajime; Kawashima, Shuichi.

1989-01-01

In a thermonuclear device, etc. impurities adsorbed to inner walls of a vacuum vessel by glow discharge are released to clean the vacuum vessel for preventing intrusion of the impurities into plasmas. The object of the present invention is to minimize the capacity of a power source equipment for the glow discharge device to the least extent. That is, a stabilization resistance is connected in series between each of a plurality of anodes which are inserted and arranged at the inside of a vacuum vessel as a cathode and a power source respectively. The resistance value R is selected so as to satisfy the relation: R < (Vi - Vm)/Ii, in which Vi: glow discharge starting voltage, Vm: glow discharge keeping voltage, Ii: glow discharge starting current. Accordingly, if a voltage is applied from a power source to a plurality of anodes, scattering of electric discharge between the anodes can be suppressed and the effect of voltage drop during discharge by the stabilization resistance can be eliminated. As a result, it is possible to provide an economically advantageous glow discharge device with the capacity for the power source facility being to the least extent. (K.M.)

ENVIRONMENTAL ASSESSMENT OF SHOP TOWEL USAGE IN THE AUTOMOTIVE AND PRINTING INDUSTRIES

Science.gov (United States)

This assessment identifies the environmental impacts and usage trends of shop towels in the printing and automotive repair industries. The shop towels are used to clean equipment and to wipe up contaminants for a variety of operations. Four types of shop towels were evaluated; wo...

Materials in world perspective. Assessment of resources, technologies and trends for key materials industries

Energy Technology Data Exchange (ETDEWEB)

Altenpohl, D G

1980-01-01

This book deals with the entire materials cycle - from extraction or harvesting to processing, manufacture, use, and reuse or disposal. It covers the present status and ongoing developments in six key materials industries in both industrialized and developing countries. Techno-economics trends, which are recognizable today, as well as important changes taking place from the mine through the refining stage on to finished products, are outlined. The 'problem triangle' of the materials industry - basic or raw materials, ecology and energy - is discussed. Of specific importance are the impacts which a given material or technology can have on the environment. Methods of assessing these impacts, which should be integrated into overall technology planning by the materials industry, are described. This book discusses resources, industry's social responsibilities and limits-to-growth. An explanation is given for opposing views on constraints and growth, not only for the materials industry, but also for the automotive and packaging industries. Thus, this book spotlights the interaction between different fields of technology and their interrelationship with and between different regions on Earth.

Assessment of heavy metal and bacterial pollution in coastal aquifers from SIPCOT industrial zones, Gulf of Mannar, South Coast of Tamil Nadu, India

Science.gov (United States)

Selvam, S.; Antony Ravindran, A.; Venkatramanan, S.; Singaraja, C.

2017-05-01

Heavy metals and microbiological contamination were investigated in groundwater in the industrial and coastal city of Thoothukudi. The main sources of drinking water in this area are water bores which are dug up to the depth of 10-50 m in almost every house. A number of chemical and pharmaceutical industries have been established since past three decades. Effluents from these industries are reportedly being directly discharged onto surrounding land, irrigation fields and surface water bodies forming point and non-point sources of contamination for groundwater in the study area. The study consists of the determination of physico-chemical properties, trace metals, heavy metals and microbiological quality of drinking water. Heavy metals were analysed using Inductively Coupled Plasma Mass Spectrometry and compared with the (WHO in Guidelines for drinking water quality, 2004) standards. The organic contamination was detected in terms of most probable number (MPN) test in order to find out faecal coliforms that were identified through biochemical tests. A comparison of the results of groundwater samples with WHO guidelines reveals that most of the groundwater samples are heavily contaminated with heavy metals like arsenic, selenium, lead, boron, aluminium, iron and vanadium. The selenium level was higher than 0.01 mg/l in 82 % of the study area and the arsenic concentration exceeded 0.01 mg/l in 42 % of the area. The results reveal that heavy metal contamination in the area is mainly due to the discharge of effluents from copper industries, alkali chemical industry, fertiliser industry, thermal power plant and sea food industries. The results showed that there are pollutions for the groundwater, and the total Coliform means values ranged from 0.6-145 MPN ml-1, faecal Coliform ranged from 2.2-143 MPN ml-1, Escherichia coli ranged from 0.9 to 40 MPN ml-1 and faecal streptococci ranged from 10-9.20 × 102 CFU ml-1. The coastal regions are highly contaminated with total

Impacts of thermal and chemical discharges to surface water

International Nuclear Information System (INIS)

Stober, Q.J.

1974-01-01

Various aspects of thermal and chemical discharges to surface water are outlined. The major impacts of nuclear power plants on aquatic resources are disruption during construction, intake of cooling water, discharge problems, and interactions with other water users. The following topics are included under the heading, assessment of aquatic ecology: identification of flora and fauna; abundance of aquatic organisms; species-environment relationships; and identification of pre-existing environmental stress. The following topics are included under the heading, environmental effects of plant operation: entrapment of fish by cooling water; passage of plankton through cooling system; discharge area and thermal plume; chemical effluents; and plant construction. (U.S.)

Assessment of University- Industry Collaboration and Technology ...

African Journals Online (AJOL)

Despite the cultural differences between university and industry, the mutual benefits from collaboration between university and industry have long been recognized in the advanced countries. Recently, the issue of technology transfer and collaboration between universities and industries has been receiving attention in the ...

Nested-scale discharge and groundwater level monitoring to improve predictions of flow route discharges and nitrate loads

Science.gov (United States)

van der Velde, Y.; Rozemeijer, J. C.; de Rooij, G. H.; van Geer, F. C.; Torfs, P. J. J. F.; de Louw, P. G. B.

2010-10-01

Identifying effective measures to reduce nutrient loads of headwaters in lowland catchments requires a thorough understanding of flow routes of water and nutrients. In this paper we assess the value of nested-scale discharge and groundwater level measurements for predictions of catchment-scale discharge and nitrate loads. In order to relate field-site measurements to the catchment-scale an upscaling approach is introduced that assumes that scale differences in flow route fluxes originate from differences in the relationship between groundwater storage and the spatial structure of the groundwater table. This relationship is characterized by the Groundwater Depth Distribution (GDD) curve that relates spatial variation in groundwater depths to the average groundwater depth. The GDD-curve was measured for a single field site (0.009 km2) and simple process descriptions were applied to relate the groundwater levels to flow route discharges. This parsimonious model could accurately describe observed storage, tube drain discharge, overland flow and groundwater flow simultaneously with Nash-Sutcliff coefficients exceeding 0.8. A probabilistic Monte Carlo approach was applied to upscale field-site measurements to catchment scales by inferring scale-specific GDD-curves from hydrographs of two nested catchments (0.4 and 6.5 km2). The estimated contribution of tube drain effluent (a dominant source for nitrates) decreased with increasing scale from 76-79% at the field-site to 34-61% and 25-50% for both catchment scales. These results were validated by demonstrating that a model conditioned on nested-scale measurements simulates better nitrate loads and better predictions of extreme discharges during validation periods compared to a model that was conditioned on catchment discharge only.

Assessing the use of computers in industrial occupational health departments.

Science.gov (United States)

Owen, J P

1995-04-01

Computers are widely used in business and industry and the benefits of computerizing occupational health (OH) departments have been advocated by several authors. The requirements for successful computerization of an OH department are reviewed. Having identified the theoretical benefits, the real picture in industry is assessed by surveying 52 firms with over 1000 employees in a large urban area. Only 15 (29%) of the companies reported having any OH service, of which six used computers in the OH department, reflecting the business priorities of most of the companies. The types of software systems used and their main use are examined, along with perceived benefits or disadvantages. With the decreasing costs of computers and increasingly 'user-friendly' software, there is a real cost benefit to be gained from using computers in OH departments, although the concept may have to be 'sold' to management.

Manufacturing Technology and Industrial Modernization Incentive Programs

Science.gov (United States)

1991-07-01

production 15. Pulsed Power Solid-state and gas discharge svkwits $ 160 Inductive storage devices Capadiors Batteries Homopolar generators Compensated...project. Inspection systems for rocket Tucson is the prime contractor for this motors will support a number of DoD Air Force funded Industrial Moderniza

State Waste Discharge Permit application, 100-N Sewage Lagoon

International Nuclear Information System (INIS)

1994-06-01

As part of the Hanford Federal Facility Agreement and Consent Order negotiations (Ecology et al. 1994), the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173--216 (or 173--218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered into Consent Order No. DE 91NM-177, (Ecology and DOE-RL 1991). This document constitutes the State Waste Discharge Permit application for the 100-N Sewage Lagoon. Since the influent to the sewer lagoon is domestic waste water, the State Waste Discharge Permit application for Public Owned Treatment Works Discharges to Land was used. Although the 100-N Sewage Lagoon is not a Public Owned Treatment Works, the Public Owned Treatment Works application is more applicable than the application for industrial waste water. The 100-N Sewage Lagoon serves the 100-N Area and other Hanford Site areas by receiving domestic waste from two sources. A network of sanitary sewer piping and lift stations transfers domestic waste water from the 100-N Area buildings directly to the 100-N Sewage Lagoon. Waste is also received by trucks that transport domestic waste pumped from on site septic tanks and holding tanks. Three ponds comprise the 100-N Sewage Lagoon treatment system. These include a lined aeration pond and stabilization pond, as well as an unlined infiltration pond. Both piped-in and trucked-in domestic waste is discharged directly into the aeration pond

Narrow gap electronegative capacitive discharges

Energy Technology Data Exchange (ETDEWEB)

Kawamura, E.; Lieberman, M. A.; Lichtenberg, A. J. [Department of Electrical Engineering and Computer Sciences, University of California, Berkeley, California 94720 (United States)

2013-10-15

Narrow gap electronegative (EN) capacitive discharges are widely used in industry and have unique features not found in conventional discharges. In this paper, plasma parameters are determined over a range of decreasing gap length L from values for which an electropositive (EP) edge exists (2-region case) to smaller L-values for which the EN region connects directly to the sheath (1-region case). Parametric studies are performed at applied voltage V{sub rf}=500 V for pressures of 10, 25, 50, and 100 mTorr, and additionally at 50 mTorr for 1000 and 2000 V. Numerical results are given for a parallel plate oxygen discharge using a planar 1D3v (1 spatial dimension, 3 velocity components) particle-in-cell (PIC) code. New interesting phenomena are found for the case in which an EP edge does not exist. This 1-region case has not previously been investigated in detail, either numerically or analytically. In particular, attachment in the sheaths is important, and the central electron density n{sub e0} is depressed below the density n{sub esh} at the sheath edge. The sheath oscillations also extend into the EN core, creating an edge region lying within the sheath and not characterized by the standard diffusion in an EN plasma. An analytical model is developed using minimal inputs from the PIC results, and compared to the PIC results for a base case at V{sub rf}=500 V and 50 mTorr, showing good agreement. Selected comparisons are made at the other voltages and pressures. A self-consistent model is also developed and compared to the PIC results, giving reasonable agreement.

Concentration of elements in suspended matter discharges to Lerma River, Mexico

International Nuclear Information System (INIS)

Avila-Perez, P.; Tejeda, S.; Carapia, L.; Barcelo-Quintal, I.; Martinez, T.

2011-01-01

The S, K, Ca, Ti, V, Cr, Mn, Fe, Cu, Zn and Pb concentration and the elemental composition of particles in suspended matter from principal discharges to Lerma River, have been evaluated. The elemental concentration in suspended matter has been obtained by Energy Dispersive X-Ray Fluorescence Spectrometry. The elemental composition of particles has been obtained by means of Energy Dispersive X-Ray Spectrometry (EDS). The results show that K, Ca, Ti, Mn and Fe are mainly from natural origin in the Upper Course of the Lerma River (UCLR), where the principal contributions probably come from dragging of soils and sediments in the rainy season and Cr, Cu, Zn and Pb are mainly from anthropogenic origin where the principal contributions come from urban and industrial untreated discharge. The application of Energy Dispersive X-Ray Spectrometry plus Scanning Electron Microscopy is useful in the characterization of suspended matter in natural, anthropogenic and mixed water discharges. (author)

Assessment Indicators of Tertiary Student of Internship Programs Adjust Industry 4.0

Directory of Open Access Journals (Sweden)

Chun-Mei Chou

2017-04-01

Full Text Available The purpose of this study was to study the assessment indicators for the entrepreneurial learned by tertiary student of internship programs adjust Industry 4.0. This study used in-depth interviews and focus groups were used to develop the ability indicators and gain consistency between the ability items. The research results showed that there were three types of entrepreneurial cognition learned by students of internship programs adjust Industry 4.: start-up experience, industry-specific experience, and managerial experience. The ability content included 11 items of entrepreneurial cognition ability: entrepreneurial traits, basic commercial ability, communication ability, digital ability, professional innovative ability, financial management ability, human resource management ability, marketing management ability, operational (work ability, and risk management ability, and there were a total of 91 ability indicators. There were 48 items of entrepreneurial cognition that had high importance and usage frequency.

Comparison of Fenton process and adsorption method for treatment of industrial container and drum cleaning industry wastewater.

Science.gov (United States)

Güneş, Elçin; Çifçi, Deniz İzlen; Çelik, Suna Özden

2018-04-01

The present study aims to explore the characterization of industrial container and drum cleaning (ICDC) industry wastewater and treatment alternatives of this wastewater using Fenton and adsorption processes. Wastewater derived from ICDC industry is usually treated by chemical coagulation and biological treatment in Turkey and then discharged in a centralized wastewater treatment facility. It is required that the wastewater COD is below 1500 mg/L to treat in a centralized wastewater treatment facility. The wastewater samples were characterized for parameters of pH, conductivity, COD, BOD 5 , TSS, NH 3 -N, TN, TOC, TP, Cd, Cr, Cu, Fe, Ni, Pb, Zn, and Hg. Initial COD values were in the range of 11,300-14,200 mg/L. The optimum conditions for Fenton treatment were 35-40 g/L for H 2 O 2 , 2-5 g/L for Fe 2+ , and 13-36 for H 2 O 2 /Fe 2+ molar ratio. The optimum conditions of PAC doses and contact times in adsorption studies were 20-30 g/L and 5-12 h, respectively. Removal efficiencies of characterized parameters for the three samples were compared for both Fenton and adsorption processes under optimum conditions. The results suggest that these wastewaters are suitable for discharge to a centralized wastewater treatment plant.

The Past, Present, and Future of Discharge Planning in Taiwan

Directory of Open Access Journals (Sweden)

Shu-Chuan Lin

2013-06-01

Full Text Available Discharge planning is an interdisciplinary approach to provide continuity of care; it is a process that includes identification, assessment, goal setting, planning, implementation, coordination, and evaluation. Discharge planning has been viewed as a major way to enhance a smooth transition for patients from the hospital to home or other chronic care units and as a solution to solve problems associated with postdischarge care. The promotion of discharge planning began in the United States in the 1960s. Nursing scholars from Taiwan learned about the concept of discharge planning from the United States in the early 1980s and subsequently introduced it to Taiwanese medical institutions in 1985. A policy to promote discharge planning in Taiwan was announced by the Executive Yuan, Department of Health in 1993. Following the healthcare reforms in 1995, discharge planning has since been strongly promoted. Studies concerning discharge planning in Taiwan showed some promising results, including increased satisfaction of patients and their families, improved preparation of caregivers, and improved quality of life for patients. However, patients receiving interdisciplinary discharge planning services were still in the minority. There was no standard evaluation procedure for interdisciplinary discharge planning, and a high percentage of patients thought that hospitals handled the postdischarge long-term care services referral procedure inadequately. Despite the positive attitudes toward discharge planning, many physicians still demonstrate an unsatisfactory level of knowledge and behaviors with regard to discharge planning. To enhance the implementation of discharge planning, a standard evaluation procedure for interdisciplinary discharge planning and improved physician awareness concerning the importance of discharge planning are needed. In Taiwan, the improvement of discharge planning in the foreseeable future is promising with the accreditation of the

Assessing natural and anthropogenic influences on water discharge and sediment load in the Yangtze River, China.

Science.gov (United States)

Zhao, Yifei; Zou, Xinqing; Liu, Qing; Yao, Yulong; Li, Yali; Wu, Xiaowei; Wang, Chenglong; Yu, Wenwen; Wang, Teng

2017-12-31

The water discharge and sediment load of rivers are changing substantially under the impacts of climate change and human activities, becoming a hot issue in hydro-environmental research. In this study, the water discharge and sediment load in the mainstream and seven tributaries of the Yangtze River were investigated by using long-term hydro-meteorological data from 1953 to 2013. The non-parametric Mann-Kendall test and double mass curve (DMC) were used to detect trends and abrupt change-points in water discharge and sediment load and to quantify the effects of climate change and human activities on water discharge and sediment load. The results are as follows: (1) the water discharge showed a non-significant decreasing trend at most stations except Hukou station. Among these, water discharge at Dongting Lake and the Min River basin shows a significant decreasing trend with average rates of -13.93×10 8 m 3 /year and -1.8×10 8 m 3 /year (PYangtze River. (2) No significant abrupt change-points were detected in the time series of water discharge for all hydrological stations. In contrast, significant abrupt change-points were detected in sediment load, most of these changes appeared in the late 1980s. (3) The water discharge was mainly influenced by precipitation in the Yangtze River basin, whereas sediment load was mainly affected by climate change and human activities; the relative contribution ratios of human activities were above 70% for the Yangtze River. (4) The decrease of sediment load has directly impacted the lower Yangtze River and the delta region. These results will provide a reference for better resource management in the Yangtze River Basin. Copyright © 2017 Elsevier B.V. All rights reserved.

Angioplasty and stent - heart - discharge

Science.gov (United States)

Drug-eluting stents - discharge; PCI - discharge; Percutaneous coronary intervention - discharge; Balloon angioplasty - discharge; Coronary angioplasty - discharge; Coronary artery angioplasty - discharge; Cardiac ...

Improving hospital discharge time: a successful implementation of Six Sigma methodology.

Science.gov (United States)

El-Eid, Ghada R; Kaddoum, Roland; Tamim, Hani; Hitti, Eveline A

2015-03-01

Delays in discharging patients can impact hospital and emergency department (ED) throughput. The discharge process is complex and involves setting specific challenges that limit generalizability of solutions. The aim of this study was to assess the effectiveness of using Six Sigma methods to improve the patient discharge process. This is a quantitative pre and post-intervention study. Three hundred and eighty-six bed tertiary care hospital. A series of Six Sigma driven interventions over a 10-month period. The primary outcome was discharge time (time from discharge order to patient leaving the room). Secondary outcome measures included percent of patients whose discharge order was written before noon, percent of patients leaving the room by noon, hospital length of stay (LOS), and LOS of admitted ED patients. Discharge time decreased by 22.7% from 2.2 hours during the preintervention period to 1.7 hours post-intervention (P Six Sigma methodology can be an effective change management tool to improve discharge time. The focus of institutions aspiring to tackle delays in the discharge process should be on adopting the core principles of Six Sigma rather than specific interventions that may be institution-specific.

Assessing unregulated ionizing radiation exposures of U.S. populations from conventional industries

International Nuclear Information System (INIS)

Pennington, Charles W.

2006-01-01

During the latter twentieth century, the public learned to fear perceived threats from emerging technologies. Concern about ionizing radiation became a persistent fear, causing protracted and often pointless debate. The twenty-first century offers new opportunities for this fear to cause public and political upset. Citizens and politicians know little about 'normal' radiation exposures caused by conventional industries. This paper summarizes ionizing radiation exposure assessments of several such industries, showing they deliver multiples of background radiation annually to millions of people, with even higher subpopulation doses due to lognormally distributed exposures. Such information may be useful in educating the public and in supporting comparative assessments or other forms of research on potential sources of public radiation exposure in the twenty-first century. By exposing people to information about normal radiation, we may hope to avoid some unfortunate policies and unnecessary regulatory responses, while abating needless public fear during this technologically challenging century

International market assessment of stand-alone photovoltaic power systems for cottage industry applications

Science.gov (United States)

Philippi, T. M.

1981-01-01

The final result of an international assessment of the market for stand-alone photovoltaic systems in cottage industry applications is reported. Nonindustrialized countries without centrally planned economies were considered. Cottage industries were defined as small rural manufacturers, employing less than 50 people, producing consumer and simple products. The data to support this analysis were obtained from secondary and expert sources in the U.S. and in-country field investigations of the Philippines and Mexico. The near-term market for photovoltaics for rural cottage industry applications appears to be limited to demonstration projects and pilot programs, based on an in-depth study of the nature of cottage industry, its role in the rural economy, the electric energy requirements of cottage industry, and a financial analysis of stand-alone photovoltaic systems as compared to their most viable competitor, diesel driven generators. Photovoltaics are shown to be a better long-term option only for very low power requirements. Some of these uses would include clay mixers, grinders, centrifuges, lathes, power saws and lighting of a workshop.

International market assessment of stand-alone photovoltaic power systems for cottage industry applications

Science.gov (United States)

Philippi, T. M.

1981-11-01

The final result of an international assessment of the market for stand-alone photovoltaic systems in cottage industry applications is reported. Nonindustrialized countries without centrally planned economies were considered. Cottage industries were defined as small rural manufacturers, employing less than 50 people, producing consumer and simple products. The data to support this analysis were obtained from secondary and expert sources in the U.S. and in-country field investigations of the Philippines and Mexico. The near-term market for photovoltaics for rural cottage industry applications appears to be limited to demonstration projects and pilot programs, based on an in-depth study of the nature of cottage industry, its role in the rural economy, the electric energy requirements of cottage industry, and a financial analysis of stand-alone photovoltaic systems as compared to their most viable competitor, diesel driven generators. Photovoltaics are shown to be a better long-term option only for very low power requirements. Some of these uses would include clay mixers, grinders, centrifuges, lathes, power saws and lighting of a workshop.

Electrical Discharge Machining (EDM: A Review

Directory of Open Access Journals (Sweden)

Asfana Banu

2016-09-01

Full Text Available Electro discharge machining (EDM process is a non-conventional and non-contact machining operation which is used in industry for high precision products. EDM is known for machining hard and brittle conductivematerials since it can melt any electrically conductive material regardless of its hardness. The workpiece machined by EDM depends on thermal conductivity, electrical resistivity, and melting points of the materials. The tool and the workpiece are adequately both immersed in a dielectric medium, such as, kerosene, deionised water or any other suitable fluid. This paper is reviewed comprehensively on types of EDM operation. A brief discussion is also done on the machining responses and mathematical modelling.

Occurrence of estrogenic effects in sewage and industrial wastewaters in Beijing, China

International Nuclear Information System (INIS)

Ma Mei; Rao Kaifeng; Wang Zijian

2007-01-01

Estrogenic potencies of the effluents or water samples from wastewater treatment plants (WWTPs), industries and hospitals and some receiving rivers in Beijing city were estimated by using a human estrogen receptor recombinant yeast assay. Estrogenic activity of industrial wastewaters was found to range from 0.1 to 13.3 ng EEQ/L and decreased to the range of 0.03-1.6 ng EEQ/L after treatment. Estrogenic activity in WWTP influent ranged from 0.3 to 1.7 ng EEQ/L and decreased to the range of 0.05-0.5 ng EEQ/L after treatment. In the receiving river waters, the estrogenic effect range was 0.1-4.7 ng EEQ/L. These data suggest that treated industrial effluents and WWTP effluents of concern are not the only source of estrogenic pollution in surface waters in Beijing city. EEQ levels in Beijing river water are likely attributable to untreated municipal and industrial wastewaters discharged directly into the river. - Estrogenic activity in Beijing river water is attributed to direct discharges of untreated municipal and industrial wastewaters

Treatment of Wastewater by Ozone Produced in Dielectric Barrier Discharge

Directory of Open Access Journals (Sweden)

Rita Bhatta

2015-01-01

Full Text Available There is rapid diminishing of water resources in many countries due to, for example, population growth and constant reduction in fresh water supply. The sewage wastewater, industrial effluents, and municipal wastewater are directly and indiscriminately discharged into rivers and lakes and thus primarily cause water pollution in Nepal. This has increased the water crisis and also causes environmental deterioration. Therefore, the need for the development of an effective, cheap, and environmentally friendly process for the treatment of wastewater before discharging into aquatic environment has emerged. Treatment by ozone produced from dielectric barrier discharge is one of the emerging technologies for such application. The ozonation process is more effective for disinfection and degradation of organic pollutants from water. The current study describes the treatment of wastewater of selected site within Kathmandu. Results on various physicochemical and microbial parameters of the inlet and outlet samples are discussed. Our results showed slight increase in pH, decrease in chemical oxygen demand, and significant increase in dissolved oxygen after ozonation. Importantly, ozonation caused total reduction of fecal coliform.

Pediatric heart surgery - discharge

Science.gov (United States)

... discharge; Heart valve surgery - children - discharge; Heart surgery - pediatric - discharge; Heart transplant - pediatric - discharge ... Geme JW, Schor NF, eds. Nelson Textbook of Pediatrics . 20th ed. Philadelphia, PA: Elsevier; 2016:chap 434. ...

77 FR 48989 - Draft Guidance for Industry on Suicidal Ideation and Behavior: Prospective Assessment of...

Science.gov (United States)

2012-08-15

...] Draft Guidance for Industry on Suicidal Ideation and Behavior: Prospective Assessment of Occurrence in... ``Suicidal Ideation and Behavior: Prospective Assessment of Occurrence in Clinical Trials.'' The purpose of... suicidal ideation and behavior in clinical trials of drug and biological products, including drugs for...

Industrial Process Cooling Towers: National Emission Standards for Hazardous Air Pollutants

Science.gov (United States)

Standards limiting discharge of chromium compound air emissions from industrial process cooling towers (IPCT's). Includes rule history, Federal Registry citations, implementation information and additional resources.

A proposed model for assessing service quality in small machining and industrial maintenance companies

Directory of Open Access Journals (Sweden)

Morvam dos Santos Netto

2014-11-01

Full Text Available Machining and industrial maintenance services include repair (corrective maintenance of equipments, activities involving the assembly-disassembly of equipments, fault diagnosis, machining operations, forming operations, welding processes, assembly and test of equipments. This article proposes a model for assessing the quality of services provided by small machining and industrial maintenance companies, since there is a gap in the literature regarding this issue and because the importance of small service companies in socio-economic development of the country. The model is an adaptation of the SERVQUAL instrument and the criteria determining the quality of services are designed according to the service cycle of a typical small machining and industrial maintenance company. In this sense, the Moments of Truth have been considered in the preparation of two separate questionnaires. The first questionnaire contains 24 statements that reflect the expectations of customers, and the second one contains 24 statements that measure perceptions of service performance. An additional item was included in each questionnaire to assess, respectively, the overall expectation about the services and the overall company performance. Therefore, it is a model that considers the interfaces of the client/supplier relationship, the peculiarities of the machining and industrial maintenance service sector and the company size.

Environmental assessment of wood industrial and collective (with heat network) heating. Synthetic report

International Nuclear Information System (INIS)

2005-12-01

This report proposes a synthesis of the results of an environmental assessment of wood industrial and collective heating. This study is based on a life cycle analysis which quantifies the impacts on the environment of all the related activities: fuel extraction, retailing, final use, and so on. Environmental impacts are assessed by means of different indicators: energetic assessment, greenhouse effect assessment, air pollution (acidification), water pollution (eutrophication), toxic material emissions in air and into the soils. Wood is compared to other heating sources (gas, fuel, electricity). Ways to improve this environmental assessment are discussed with respect to wood supply, boiler auxiliary equipment, boiler and combustion

Towards assessing the social sustainability performance of the petroleum industry in the Niger Delta Region of Nigeria

CSIR Research Space (South Africa)

Bubou, GM

2009-05-01

Full Text Available Unresolved social issues between the local community and the petroleum industry plague the Niger Delta Region of Nigeria. These concerns are addressed by introducing a social sustainability assessment framework for the petroleum industry. Key...

Assessing the impact of the introduction of an electronic hospital discharge system on the completeness and timeliness of discharge communication: a before and after study.

Science.gov (United States)

Mehta, Rajnikant L; Baxendale, Bryn; Roth, Katie; Caswell, Victoria; Le Jeune, Ivan; Hawkins, Jack; Zedan, Haya; Avery, Anthony J

2017-09-05

Hospital discharge summaries are a key communication tool ensuring continuity of care between primary and secondary care. Incomplete or untimely communication of information increases risk of hospital readmission and associated complications. The aim of this study was to evaluate whether the introduction of a new electronic discharge system (NewEDS) was associated with improvements in the completeness and timeliness of discharge information, in Nottingham University Hospitals NHS Trust, England. A before and after longitudinal study design was used. Data were collected using the gold standard auditing tool from the Royal College of Physicians (RCP). This tool contains a checklist of 57 items grouped into seven categories, 28 of which are classified as mandatory by RCP. Percentage completeness (out of the 28 mandatory items) was considered to be the primary outcome measure. Data from 773 patients discharged directly from the acute medical unit over eight-week long time periods (four before and four after the change to the NewEDS) from August 2010 to May 2012 were extracted and evaluated. Results were summarised by effect size on completeness before and after changeover to NewEDS respectively. The primary outcome variable was represented with percentage of completeness score and a non-parametric technique was used to compare pre-NewEDS and post-NewEDS scores. The changeover to the NewEDS resulted in an increased completeness of discharge summaries from 60.7% to 75.0% (p communication.

Assessment of waste management options in the oil and gas industry in Ghana using nuclear analytical techniques

International Nuclear Information System (INIS)

Ahialey, W. K.

2013-07-01

Ghana's oil find is growing steadily as more discoveries are being made. Oil and gas exploration and production coupled with their related activities produce wastes. These wastes could be put into three primary categories such as produced water, drilling cuttings and associated wastes (any other waste related with the exploration, development and production of crude oil or natural gas). These wastes may contain varying amount of contaminants such as heavy metals, suspended solid particles and radioactive materials such as Ra-226 or Rn-228, product of U-238 decay that occur in some geologic formations and sediments. The main objective of this study is to assess the waste management practices in the oil and gas industry in Ghana by qualification and quantification of waste generated during exploration and production, examining the system put in place by oil and gas companies to manage these wastes and also determine some basic contaminants in some of these wastes brought to shore for management. Waste samples were taken from Tema Oil Refinery (TOR) and Zeal Environmental Technology Limited at Takoradi. The samples were analyzed by Neutron Activation Analysis (NAA) and Flame Atomic Absorption Spectrometry (FAAS) analytical methods to determine heavy metals (Pb, Cd, Cr, Hg, As, Ag, Ba, Se) in the oily waste water, oil based mud, block and ash samples. The results showed that the levels of heavy metals were below the EPA permissible limit for discharge into the natural drainage except the level of Pb in the mud samples taken from Zeal before treatment. The levels ranged from 3.99mg/l to 7.44mgl. Even though these levels were above 0.1mg/l discharge standard limit, there was no cause for alarm because the levels dropped below the EPA limit after treatment. Furthermore, the quantity of general garbage deposited in the landfill at Takoradi be Zeal Environmental Technology Limited from 2011 to 2012 increased from 497m 3 to 1,314.29m 3 respectively. (author)

Discharge current characteristics as an 'electrical method' for glow discharge plasma diagnosis

International Nuclear Information System (INIS)

Toma, M.; Paraschivescu, Alina; Morminches, Anisoara

2001-01-01

In its simplest form, the glow discharge can be established by passing an electric current through gas between two electrodes. The gas and the electrodes are contained in an insulating envelope. In many technological applications, and not only, the plasma devices are often treated like a black box. There is a series of external parameters or control variables which can be adjusted to obtain a desired effect, namely, the operating voltage, gas pressure, gas nature, gas flow rate, magnetic field strength and magnetic field configuration, electric field geometry, interelectrode distance, and cathode characteristics. The discharge current can be controlled by each of the above control variables. The core idea of this work is the following: a lot of information about the phenomena from the discharge volume, at electrodes or at the discharge bounding wall surface, can be obtained knowing how the change of one of the control parameters influences the discharge current. The following regimes were analyzed: dark discharges (background ionization, saturation regime, Townsend regime, corona regime), glow discharge (the normal and abnormal discharge) and arc discharge (glow to arc transition, non-thermal arcs, thermal arcs). It was concluded that the nonlinearity in the shape of the discharge current characteristics as a function of an external control parameter, can be correlated with the elementary processes and the dynamics of different space charge structures generated in plasma devices. (authors)

Experimental Investigation – Magnetic Assisted Electro Discharge Machining

Science.gov (United States)

Kesava Reddy, Chirra; Manzoor Hussain, M.; Satyanarayana, S.; Krishna, M. V. S. Murali

2018-04-01

Emerging technology needs advanced machined parts with high strength and temperature resistance, high fatigue life at low production cost with good surface quality to fit into various industrial applications. Electro discharge machine is one of the extensively used machines to manufacture advanced machined parts which cannot be machined by other traditional machine with high precision and accuracy. Machining of DIN 17350-1.2080 (High Carbon High Chromium steel), using electro discharge machining has been discussed in this paper. In the present investigation an effort is made to use permanent magnet at various positions near the spark zone to improve surface quality of the machined surface. Taguchi methodology is used to obtain optimal choice for each machining parameter such as peak current, pulse duration, gap voltage and Servo reference voltage etc. Process parameters have significant influence on machining characteristics and surface finish. Improvement in surface finish is observed when process parameters are set at optimum condition under the influence of magnetic field at various positions.

Heart attack - discharge

Science.gov (United States)

... and lifestyle Cholesterol - drug treatment Controlling your high blood pressure Deep vein thrombosis - discharge Dietary fats explained Fast food tips Heart attack - discharge Heart attack - what to ask your doctor Heart bypass ... pacemaker - discharge High blood pressure - what to ask your doctor How to read ...

Assessment of application of 5S practices in ceramic industry

Directory of Open Access Journals (Sweden)