WorldWideScience

Sample records for industrial combustion environments

  1. Combustible dusts: a serious industrial hazard.

    Science.gov (United States)

    Joseph, Giby

    2007-04-11

    After investigating three fatal explosions in manufacturing plants, the U.S. Chemical Safety and Hazard Investigation Board (CSB) has concluded: The explosive hazard of combustible dust is not well known, and helping industry to understand this hazard is a priority. Prompted by these three incidents in North Carolina, Kentucky and Indiana and the need to increase the hazard awareness, CSB is conducting a study to examine the nature and scope of dust explosion risks in industry and to identify initiatives that may be necessary to more effectively prevent combustible dust fires and explosions. Such initiatives may include regulatory action, voluntary consensus standards, or other measures that could be taken by industry, labor, government, and other parties. A critical task of the dust study is analyzing past incidents to determine the severity of the problem within industry. The analysis is focusing on the number of incidents, injuries and fatalities, industrial sectors affected, and regulatory oversight. This paper presents the preliminary findings from CSBs analysis of combustible dust incidents over the past 25 years. This paper has not been approved by the Board and is published for general informational purposes only. Every effort has been made to accurately present the contents of any Board-approved report mentioned in this paper. Any material in the paper that did not originate in a Board-approved report is solely the responsibility of the authors and does not represent an official finding, conclusion, or position of the Board.

  2. 2001 Industry Studies: Environment

    Science.gov (United States)

    2001-01-01

    Internet . 8 March 2001. xliii Henry Kelly, “ Information Technology and the Environment: Choices and Opportunities,” CISP.org (October 1999) pp 8...development. Despite only a small percentage of U.S. environmental businesses participating in the world market , the U.S. industry has the best technology ...businesses participating in the world market , the U.S. industry has the best technology in the world and already generates a trade surplus. With the world

  3. Industries and environment - 2014 edition

    International Nuclear Information System (INIS)

    Maurice, Delphine

    2014-04-01

    After a general overview of the French economic context (composition of the French industry, the manufacturing industry, industry production and trade balance), this report presents industrial installations with risks: installations classified for the protection of the environment and submitted to industrial authorizations (ICPEA), basic nuclear installations, Seveso industrial facilities, IPPC industrial installations. The next part analyzes the various pressures exerted by the industry on the environment: material production and consumption, water taking, consumption of energetic products, release of pollutants in waters of industrial ICPE, releases in the air, greenhouse gas emissions, production of wastes, accidents and incidents with environmental consequences, polluted sites and soils, hazardous chemical products in the industry, industrial companies involved in nano-technologies and nano-materials. The last part proposes an overview of responses to these issues: implementation of environmental management system, corporate societal responsibility, investments and expenditures for the protection of the environment, industrial eco-activities, eco-labelled products manufactured by the industry

  4. Industry-identified combustion research needs: Special study

    Energy Technology Data Exchange (ETDEWEB)

    Keller, J.G.; Soelberg, N.R.; Kessinger, G.F.

    1995-11-01

    This report discusses the development and demonstration of innovative combustion technologies that improve energy conservation and environmental practices in the US industrial sector. The report includes recommendations by industry on R&D needed to resolve current combustion-related problems. Both fundamental and applied R&D needs are presented. The report assesses combustion needs and suggests research ideas for seven major industries, which consume about 78% of all energy used by industry. Included are the glass, pulp and paper, refinery, steel, metal casting, chemicals, and aluminum industries. Information has been collected from manufacturers, industrial operators, trade organizations, and various funding organizations and has been supplemented with expertise at the Idaho National Engineering Laboratory to develop a list of suggested research and development needed for each of the seven industries.

  5. Combustion of Sewage Sludge as Alternative Fuel for Cement Industry

    Institute of Scientific and Technical Information of China (English)

    LI Fuzhou; ZHANG Wei

    2011-01-01

    The combustion of sewage sludge and coal was studied by thermogravimetric analysis.Both differential scanning calorimetric analysis and derivative thermogravimetric profiles showed differences between combustion of sewage sludge and coal, and non-isothermal kinetics analysis method was applied to evaluate the combustion process. Based on Coats-Redfem integral method, some reaction models were tested,the mechanism and kinetics of the combustion reaction were discussed. The results show that the combustion of sewage sludge is mainly in the Iow temperature stage, meanwhile the ignition temperature and Arrhenius activation energy are lower than that of coal. The combustion of sewage sludge has the advantage over coal in some aspects, thus sewage sludge can partly replace coal used as cement industry fuel.

  6. Power industry and environment

    International Nuclear Information System (INIS)

    Hrynkiewicz, A.

    2000-01-01

    Structure of power industry from the view point of fuel used in Poland have been presented. Environmental impact connecting with emission of CO 2 , SO 2 , NO x and fly ash have been assessed. The comparison of environmental hazards with that being result of nuclear power plants have been also done. On the base of presenting data, building of nuclear energetics in Poland as soon as possible seem to be necessary

  7. Gas pollutants from detonation and combustion of industrial explosives

    Energy Technology Data Exchange (ETDEWEB)

    Campos, J.; Pines, A.; Gois, J.C.; Portugal, A. (University of Coimbra, Coimbra (Portugal). Mechanical Engineering Dept.)

    1993-01-01

    The potential hazards of fumes, from blasting operations in underground mines, have long been recognised. Beyond this normal use of explosives, there are also large amounts of energy substances which cannot be used because their life time is outdated or they are not within the minimal quality requirements. There is a lack of information concerning tests, procedures and theoretical predictions of pollutant concentrations in fumes from detonation and combustion operations with industrial explosives. The most common industrial explosives in Portugal are ammonium nitrate-fuel oil compositions (anfo), and dynamite. Recently, ammonium nitrate based emulsion explosives are more and more used in industrial applications. This paper presents the structure and fundamental thermodynamic equations of THOR computer code to calculate the combustion and detonation products (CO[sub 2], CO, H[sub 2]O, N[sub 2], O[sub 2], H[sub 2], OH, NO, H, N, O, HCN, NH[sub 3], NO[sub 2], N[sub 2]O, CH[sub 4] gases and two kinds of solid carbon - graphite and diamond) for the minimum value of Gibbs free energy, using three well known equations of state - BKW, H9 and H12. Detonation experiments are described and gas analysis discussed. Measured pollutants concentrations (CO, CO[sub 2], NO and NO[sub 2]), as a function of volume of explosion chamber, prove the dependence of expansion mechanisms on CO and NO formation and recombination and validate theoretical predictions. Incineration of explosives in a fluidised bed is described. Products composition from isobare adiabatic combustion of selected explosives has been calculated and correlated with previous calculations for a detonation regime. The obtained results demonstrate the possibility of predicting gas composition of detonation and combustion products of industrial explosives. 22 refs., 14 figs., 1 tab.

  8. Industry Study, Environment Industry, Spring 2009

    Science.gov (United States)

    2009-01-01

    practices. For example, the cruising sector of the tourism industry has widely- acknowledged negative environmental impacts (carbon emissions and ocean...Services: An Industry Analysis ,” (2009): 4. http://www.berr.gov.uk/files/file50253.pdf 18 Ibid., 5. 19 EBI, 21 20 Department for Business...Ibid., 26. 50 DataMonitor Country Analysis Report, “Korea: In-Depth PESTLE Insights,” (June 2008): 4. 51 EBI, “3000,” 1-22. 52 Ibid., 5-130, 5

  9. New combustion, environment regulations: the answers for natural gas; Nouvelles reglementations, combustion, environnement: les reponses pour le gaz naturel

    Energy Technology Data Exchange (ETDEWEB)

    Le Peltier-Marc, A. [Gaz de France (GDF), 75 - Paris (France)

    1997-12-31

    This paper reports on the point of view from Gaz de France (GdF) company concerning the potential consequences of the use of natural gas in combustion systems with respect to the new regulations about combustion and environment. Details concerning the measures relative to the limitation of pollutants in small combustion installations (2 - 20 MW) are given (chimney height, SO{sub x}, NO{sub x} and dusts content in exhaust gases). (J.S.)

  10. Natural gas industry and its effects on the environment

    International Nuclear Information System (INIS)

    Al-Masri, M. S.; Kejeijan, B.

    2008-01-01

    The discoveries of natural gas have increased during the last ten years in Syria, These increases lead to the necessity of knowing the effects of this industry on the environment. Syrian Arabic Republic has been planning to convert most of the current electric of plants to natural gas in addition to future plans to export natural gas to the surrounding countries. In addition, the government is working on the use of LPG gas in automobiles. However, environmentally, the importance of natural gas is due to the followings: 1- Natural gas, when burned, emits lower quantities of greenhouse gases and criteria pollutants per unit of energy produced than to other fossil fuels. This occurs in part because natural gas is more fully combusted, and in part because natural gas contains fewer impurities than any other fossil fuel. 2-The amount of carbon dioxide produced from the combustion of natural gas is less than the amount produced from the combustion of other fossil fuels to produce the same amount of heat. One of the important uses of natural gas is in the transportation since natural gas does not produce during combustion toxic compounds which are usually produced during the combustion of diesel and benzene. therefore natural gas is seen and considered as an important fuel to address environmental concerns. (author)

  11. The Industrial Engineer and Energy and Environment

    Directory of Open Access Journals (Sweden)

    Sirichan Thongprasert

    2009-02-01

    Full Text Available Industries have always been a major consumer of energy and a major source of greenhouse gas emissions, causing environmental problems. Concerns about the impact of industries on the environment have led industries to change or adapt their methodologies to be more efficient and environmentally responsible. This article explains the impact that has on the industrial engineer.

  12. The Industrial Engineer and Energy and Environment

    OpenAIRE

    Sirichan Thongprasert

    2009-01-01

    Industries have always been a major consumer of energy and a major source of greenhouse gas emissions, causing environmental problems. Concerns about the impact of industries on the environment have led industries to change or adapt their methodologies to be more efficient and environmentally responsible. This article explains the impact that has on the industrial engineer.

  13. Study of combustion in microgravity environments and application of the findings to combustors for industrial use; Bisho juryoku kankyoka ni okeru nensho kenkyu oyobi sangyoyo nensho kiki eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Sato, J. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    1997-09-10

    Natural convection is one of the factors that make the elucidation of the combustion phenomenon difficult. Such being the case, it is necessary to utilize microgravity enviroments to learn fuel combustion characteristics and parameters governing the combustion phenomenon for the development of optimal burning appliances. The free-fall facility of JAMIC (Japan Micro Gravity Center) creates a microgravity field that lasts for 10 seconds, and helps perform various combustion-related researches. This report outlines the findings obtained thanks to the use of this facility. In a `study concerning the creation of sophisticated combustion technology,` the combustion of 50{mu}m fuel droplets (too small to involve natural convetion) in a jet engine combustor is simulated in a microgravity field using experimentally producible 1mm drops, and the relationship between the droplet burn time and pressure is disclosed. In addition, using a small combustion furnace, the behavior of a natural-size flame is estimated and the propagation speed of a carbon powder flame is studied. 6 figs.

  14. Impact of industrialization on environment

    International Nuclear Information System (INIS)

    Anwar, S.M.; Saqi, S.K.

    2005-01-01

    The positive economic and social results of industrial growth have been accompanied by serious environmental degradation, however, as well growing threats to health from occupational hazards. To some extent, these problems are analogous to those of early industrial Europe. In the 19th century, the shift from a rural, agrarian society to an urban, industrial society initially involve widespread social and economic disruption, unemployment, homelessness, pollution, and increased exposure to health hazards both at work and at home. Many of these same problems characterize cities in the developing world today. As part of this growth, industrial wastes are going in quantity and becoming more varied, more toxic, and more difficult to dispose off or degrade. Densities in cities where much of the industrial production is located for surpass those in developed countries, so the number of people exposed to pollutants is potentially much greater. (author)

  15. Working group report: methane emissions from fuel combustion and industrial processes

    International Nuclear Information System (INIS)

    Berdowski, J.J.M.; Beck, L.; Piccot, S.; Olivier, J.G.J.; Veldt, C.

    1993-01-01

    This paper lists the source categories which are currently recognised as minor sources of methane. These fall into five broad groups: stationary fuel combustion (residential combustion of fuels, solid waste incineration at home sites, on-site agricultural waste burning, industrial and utility combustion of coal, wood, oil and gas, commercial and industrial waste incineration); mobile fuel combustion; non-combustion industrial processes (primary metals production, chemical manufacturing processes, petroleum refining, commercial charcoal manufacturing waste treatments); minor energy production sources (storage and distribution of automotive fuels, geothermal energy production; peat mining operations, oil shale mining operations); and miscellaneous sources. The paper also presents a preliminary estimate of global methane emissions from these minor sources and the results of the working group's discussion on recommendations for the IPCC/OECD methodology and specific research needs. A list of control options for emissions from minor sources is provided. 2 tabs

  16. Combustion

    CERN Document Server

    Glassman, Irvin

    1987-01-01

    Combustion, Second Edition focuses on the underlying principles of combustion and covers topics ranging from chemical thermodynamics and flame temperatures to chemical kinetics, detonation, ignition, and oxidation characteristics of fuels. Diffusion flames, flame phenomena in premixed combustible gases, and combustion of nonvolatile fuels are also discussed. This book consists of nine chapters and begins by introducing the reader to heats of reaction and formation, free energy and the equilibrium constants, and flame temperature calculations. The next chapter explores the rates of reactio

  17. Combustion

    CERN Document Server

    Glassman, Irvin

    2008-01-01

    Combustion Engineering, a topic generally taught at the upper undergraduate and graduate level in most mechanical engineering programs, and many chemical engineering programs, is the study of rapid energy and mass transfer usually through the common physical phenomena of flame oxidation. It covers the physics and chemistry of this process and the engineering applications-from the generation of power such as the internal combustion automobile engine to the gas turbine engine. Renewed concerns about energy efficiency and fuel costs, along with continued concerns over toxic and particulate emissions have kept the interest in this vital area of engineering high and brought about new developments in both fundamental knowledge of flame and combustion physics as well as new technologies for flame and fuel control. *New chapter on new combustion concepts and technologies, including discussion on nanotechnology as related to combustion, as well as microgravity combustion, microcombustion, and catalytic combustion-all ...

  18. Combustion of Metals in Reduced-Gravity and Extra Terrestrial Environments

    Science.gov (United States)

    Branch, M.C.; Abbud-Madrid, A.; Daily, J. W.

    1999-01-01

    The combustion of metals is a field with important practical applications in rocket propellants, high-temperature flames, and material synthesis. Also, the safe operation of metal containers in high-pressure oxygen systems and with cryogenic fuels and oxidizers remains an important concern in industry. The increasing use of metallic components in spacecraft and space structures has also raised concerns about their flammability properties and fire suppression mechanisms. In addition, recent efforts to embark on unmanned and manned planetary exploration, such as on Mars, have also renewed the interest in metal/carbon-dioxide combustion as an effective in situ resource utilization technology. In spite of these practical applications, the understanding of the combustion properties of metals remains far behind that of the most commonly used fuels such as hydrocarbons. The lack of understanding is due to the many problems unique to metal- oxidizer reactions such as: low-temperature surface oxidation prior to ignition, heterogeneous reactions, very high combustion temperatures, product condensation, high emissivity of products, and multi-phase interactions. Very few analytical models (all neglecting the influence of gravity) have been developed to predict the burning characteristics and the flame structure details. Several experimental studies attempting to validate these models have used small metal particles to recreate gravity-free conditions. The high emissivity of the flames, rapid reaction, and intermittent explosions experienced by these particles have made the gathering of any useful information on burning rates and flame structure very difficult. The use of a reduced gravity environment is needed to clarify some of the complex interactions among the phenomena described above. First, the elimination of the intrusive buoyant flows that plague all combustion phenomena is of paramount importance in metal reactions due to the much higher temperatures reached during

  19. Combustion

    CERN Document Server

    Glassman, Irvin

    1997-01-01

    This Third Edition of Glassman's classic text clearly defines the role of chemistry, physics, and fluid mechanics as applied to the complex topic of combustion. Glassman's insightful introductory text emphasizes underlying physical and chemical principles, and encompasses engine technology, fire safety, materials synthesis, detonation phenomena, hydrocarbon fuel oxidation mechanisms, and environmental considerations. Combustion has been rewritten to integrate the text, figures, and appendixes, detailing available combustion codes, making it not only an excellent introductory text but also an important reference source for professionals in the field. Key Features * Explains complex combustion phenomena with physical insight rather than extensive mathematics * Clarifies postulates in the text using extensive computational results in figures * Lists modern combustion programs indicating usage and availability * Relates combustion concepts to practical applications.

  20. Nuclear power industry and environment

    International Nuclear Information System (INIS)

    Sivintsev, Yu.V.

    1979-01-01

    Estimated is the environmental impact of the developing nuclear power in the UK. The radiation levels of the population due to natural and artificial sources are considered. Among the natural sources singled out are the following ones: 238 U occuring in the surface layer of the earth-crust, 40 K which is the component of man muscles and which is the most important source of internal irradiation, and the cosmic radiation as well. Among the man-made radiation sources the dominant ones are X-ray diagnostics, nuclear tests and radioactive fall-out resulted from them. It is stated that nowdays the dose, caused by nuclear power industry in the UK, constitutes approximately 0.5 mrem/yr, which is considerably less than the dose variations due to residence change within the country or frequency of X-ray diagnostical examinations. The high level of the risk for the population in the NPS vicinity and for the personnel is estimated with the help of linear extrapolation of ''dose-response'' curve regarding the natural variations caused by residence variations and occupational hazard. According to the ICRP data, the risk of late effects is 10 -4 for man-rem. Considered are the existing and perspective management methods for NPS the high-level radioactive wastes in the UK as well as the equipment

  1. Nuclear power industry and environment

    Energy Technology Data Exchange (ETDEWEB)

    Sivintsev, Yu V

    1979-01-01

    Estimated is the environmental impact of the developing nuclear power in the UK. The radiation levels of the population due to natural and artificial sources are considered. Among the natural sources singled out are the following ones: /sup 238/U occuring in the surface layer of the earth-crust, /sup 40/K which is the component of man muscles and which is the most important source of internal irradiation, and the cosmic radiation as well. Among the man-made radiation sources the dominant ones are X-ray diagnostics, nuclear tests and radioactive fall-out resulted from them. It is stated that nowdays the dose, caused by nuclear power industry in the UK, constitutes approximately 0.5 mrem/y, which is considerably less than the dose variations due to residence change within the country or frequency of X-ray diagnostical examinations. The high level of the risk for the population in the NPS vicinity and for the personnel is estimated with the help of linear extrapolation of ''dose-response'' curve regarding the natural variations caused by residence variations and occupational hazard. According to the ICRP data, the risk of late effects is 10/sup -4/ for man-rem. Considered are the existing and perspective management methods for NPS the high-level radioactive wastes in the UK as well as the equipment.

  2. Ignition Delay of Combustible Materials in Normoxic Equivalent Environments

    Science.gov (United States)

    McAllister, Sara; Fernandez-Pello, Carlos; Ruff, Gary; Urban, David

    2009-01-01

    Material flammability is an important factor in determining the pressure and composition (fraction of oxygen and nitrogen) of the atmosphere in the habitable volume of exploration vehicles and habitats. The method chosen in this work to quantify the flammability of a material is by its ease of ignition. The ignition delay time was defined as the time it takes a combustible material to ignite after it has been exposed to an external heat flux. Previous work in the Forced Ignition and Spread Test (FIST) apparatus has shown that the ignition delay in the currently proposed space exploration atmosphere (approximately 58.6 kPa and32% oxygen concentration) is reduced by 27% compared to the standard atmosphere used in the Space Shuttle and Space Station. In order to determine whether there is a safer environment in terms of material flammability, a series of piloted ignition delay tests using polymethylmethacrylate (PMMA) was conducted in the FIST apparatus to extend the work over a range of possible exploration atmospheres. The exploration atmospheres considered were the normoxic equivalents, i.e. reduced pressure conditions with a constant partial pressure of oxygen. The ignition delay time was seen to decrease as the pressure was reduced along the normoxic curve. The minimum ignition delay observed in the normoxic equivalent environments was nearly 30% lower than in standard atmospheric conditions. The ignition delay in the proposed exploration atmosphere is only slightly larger than this minimum. Interms of material flammability, normoxic environments with a higher pressure relative to the proposed pressure would be desired.

  3. NEDO project reports. High performance industrial furnace development project - High temperature air combustion

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-21

    For the purpose of reducing energy consumption, a NEDO project 'Developmental research on high efficiency industrial furnaces' was carried out from FY 1993 to FY 1999 by The Japan Industrial Furnaces Manufacturers Association, and the paper outlined the details of the project. Industrial furnaces handled in this R and D can bring 30% reduction of the energy consumption and approximately 50% NOx reduction, and were given the 9th Nikkei global environmental technology prize. In the study of combustion phenomena of high temperature air combustion, the paper arranged characteristics of flame, the base of gaseous fuel flame, the base of liquid fuel flame, the base of solid fuel flame, etc. Concerning high temperature air combustion models for simulation, fluid dynamics and heat transfer models, and reaction and NOx models, etc. As to impacts of high temperature air combustion on performance of industrial furnaces, energy conservation, lowering of pollution, etc. In relation to a guide for the design of high efficiency industrial furnaces, flow charts, conceptual design, evaluation method for heat balance and efficiency using charts, combustion control system, applicability of high efficiency industrial furnaces, etc. (NEDO)

  4. NEDO project reports. High performance industrial furnace development project - High temperature air combustion

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-21

    For the purpose of reducing energy consumption, a NEDO project 'Developmental research on high efficiency industrial furnaces' was carried out from FY 1993 to FY 1999 by The Japan Industrial Furnaces Manufacturers Association, and the paper outlined the details of the project. Industrial furnaces handled in this R and D can bring 30% reduction of the energy consumption and approximately 50% NOx reduction, and were given the 9th Nikkei global environmental technology prize. In the study of combustion phenomena of high temperature air combustion, the paper arranged characteristics of flame, the base of gaseous fuel flame, the base of liquid fuel flame, the base of solid fuel flame, etc. Concerning high temperature air combustion models for simulation, fluid dynamics and heat transfer models, and reaction and NOx models, etc. As to impacts of high temperature air combustion on performance of industrial furnaces, energy conservation, lowering of pollution, etc. In relation to a guide for the design of high efficiency industrial furnaces, flow charts, conceptual design, evaluation method for heat balance and efficiency using charts, combustion control system, applicability of high efficiency industrial furnaces, etc. (NEDO)

  5. Numerical simulations of industrial processes involving fluid dynamics, combustion and radiation

    Energy Technology Data Exchange (ETDEWEB)

    Ducrocq, J [Air Liquide, Centre de Recherche Claude-Delorme, Jouy-en-Josas (France)

    1998-12-31

    Moving out of the scientific community research laboratories, computational fluid dynamics (CFD) software packages are now allowing industrials to analyse and optimize industrial processes involving the use of gases, liquids and even some two-phase fluids. Their attractiveness and their impact stems out from the opportunity they offer to bring insight into an existing unit, or even at the design stage, by displaying the spatial distribution of process relevant variables such as temperature, concentration. The filling of the spacing in between a two-layer window is a simple example. This new opportunity of visualisation is at times an unique way, when the process environment is an opaque one, such as liquid metal flowing into a tundish or when measurements of flows may be a long and tedious work, such as flows within water treatment basins. This environment we are to investigate in order to optimize can also be a harsh one, due to its high temperature level for example. Such are burners. But then pure fluid flow analysis, such as cold flow water models, has too many shortcomings. The description of combustion processes and of radiation become a necessary feature in order to describe thermal heat transfer or to locate `hot spots`. Such numerical models showing our oxycombustion expertise in glass melting will be presented. (author)

  6. Numerical simulations of industrial processes involving fluid dynamics, combustion and radiation

    Energy Technology Data Exchange (ETDEWEB)

    Ducrocq, J. [Air Liquide, Centre de Recherche Claude-Delorme, Jouy-en-Josas (France)

    1997-12-31

    Moving out of the scientific community research laboratories, computational fluid dynamics (CFD) software packages are now allowing industrials to analyse and optimize industrial processes involving the use of gases, liquids and even some two-phase fluids. Their attractiveness and their impact stems out from the opportunity they offer to bring insight into an existing unit, or even at the design stage, by displaying the spatial distribution of process relevant variables such as temperature, concentration. The filling of the spacing in between a two-layer window is a simple example. This new opportunity of visualisation is at times an unique way, when the process environment is an opaque one, such as liquid metal flowing into a tundish or when measurements of flows may be a long and tedious work, such as flows within water treatment basins. This environment we are to investigate in order to optimize can also be a harsh one, due to its high temperature level for example. Such are burners. But then pure fluid flow analysis, such as cold flow water models, has too many shortcomings. The description of combustion processes and of radiation become a necessary feature in order to describe thermal heat transfer or to locate `hot spots`. Such numerical models showing our oxycombustion expertise in glass melting will be presented. (author)

  7. System for combustion of sunflower shells in industrial steam generators

    International Nuclear Information System (INIS)

    Todoriev, Kh.

    2000-01-01

    The paper presents an economically efficient solution for reconstruction of steam generators with steam production over 5 t/h using foregoing cyclone chamber for sunflower shells combustion. For average fuel caloricity 9 445 ccal/kg and sunflower shells caloricity between 3 485 and 3 750 ccal/kg, the petroleum saving is 68.78% for an average boiler efficiency 4.6 t/h steam

  8. The petroleum refining industry and the implications for the environment

    International Nuclear Information System (INIS)

    Saraiva, Gerardo Jose de Pontes

    2000-01-01

    The petroleum refining industry is basically concerned with the production of oil, lubricants and intermediate petrochemical products, utilizing crude oil as its main raw material. Petroleum refining, a distillation process that breaks hydrocarbons into fractions, eliminating undesired impurities, generates irreducible residues. Until the industrial revolution, the residues were essentially organic, susceptible to the attack of agents of destruction and transformation (bacterium, fungi, etc). Suddenly, due to the intensification of human activities of modern man, nature scattered across the planet more resistant products, many of them with long life times, that produce a deeper impact in the environment. Almost entirely marine is the pollution that results from increasing quantity of hydrocarbons dumped into the sea, a problem that is aggravated by the development of manufacturing and transportation of petroleum products. The expansion of the petroleum commerce, using essentially maritime transportation, has increased considerably the probability of accidents increasing the risks of environment pollution. This work presents suggestions and possible solutions to minimize the problem of environment pollution, caused by refining and transportation of this combustible, essential to present time industry. (author)

  9. Industry and the environment - voluntary initiatives

    International Nuclear Information System (INIS)

    Olsen, K.; Guldborg, S.

    1997-01-01

    For some time industry in general has sought to take visible initiatives which demonstrate its sense of responsibility in respect of the environment. A main motivation is to ensure a business based approach, to establish a partnership with policy makers, which will reduce the necessity of command and control measures. In 1989 the European Commission invited Eurogas and other energy industries to develop Codes of Conduct in relation to the environment, based on specific guiding principles. The natural gas industry continues to seek ways to build on the advantages of its product and to aim for all-round improvement with regard to environmental policies. The potential and importance of the Environmental Management Systems (EMSs) is increasingly developed by companies within Europe and internationally. The key elements of the proposed EMS system for the gas industry are presented in detail. (R.P.)

  10. Methanol Droplet Combustion in Oxygen-Inert Environments in Microgravity

    Science.gov (United States)

    Nayagam, Vedha; Dietrich, Daniel L.; Hicks, Michael C.; Williams, Forman A.

    2013-01-01

    The Flame Extinguishment (FLEX) experiment that is currently underway in the Combustion Integrated Rack facility onboard the International Space Station is aimed at understanding the effects of inert diluents on the flammability of condensed phase fuels. To this end, droplets of various fuels, including alkanes and alcohols, are burned in a quiescent microgravity environment with varying amounts of oxygen and inert diluents to determine the limiting oxygen index (LOI) for these fuels. In this study we report experimental observations of methanol droplets burning in oxygen-nitrogen-carbon dioxide and oxygen-nitrogen-helium gas mixtures at 0.7 and 1 atmospheric pressures. The initial droplet size varied between approximately 1.5 mm and 4 mm to capture both diffusive extinction brought about by insufficient residence time at the flame and radiative extinction caused by excessive heat loss from the flame zone. The ambient oxygen concentration varied from a high value of 30% by volume to as low as 12%, approaching the limiting oxygen index for the fuel. The inert dilution by carbon dioxide and helium varied over a range of 0% to 70% by volume. In these experiments, both freely floated and tethered droplets were ignited using symmetrically opposed hot-wire igniters and the burning histories were recorded onboard using digital cameras, downlinked later to the ground for analysis. The digital images yielded droplet and flame diameters as functions of time and subsequently droplet burning rate, flame standoff ratio, and initial and extinction droplet diameters. Simplified theoretical models correlate the measured burning rate constant and the flame standoff ratio reasonably well. An activation energy asymptotic theory accounting for time-dependent water dissolution or evaporation from the droplet is shown to predict the measured diffusive extinction conditions well. The experiments also show that the limiting oxygen index for methanol in these diluent gases is around 12% to

  11. Evaluating possible industrial applications of combustible shales and shale ash wastes

    Directory of Open Access Journals (Sweden)

    Н. К. Кондрашева

    2016-08-01

    Full Text Available Today energy consumption is constantly growing while explored reserves of easily accessible oil are depleting, which is a reason why most countries tend to diversify their energy mix, develop non-hydrocarbon energy sources and use domestic types of fuel, including the low grade ones. Thereby interest is raised to such a source of hydrocarbons as combustible shales. Combustible shales appear to be one of the highest-potential types of organic raw materials, which may offset and in future even substitute oil products and gas. The paper is investigating behavior and structure of combustible shales during heat treatment in order to identify their possible industrial applications. A synchronous thermal analysis has been held, chemical composition of combustible shales’ mineral fraction and optimal conditions for shale fines briquetting have been determined.

  12. Contributions of fuel combustion to pollution by airborne particles in urban and non-urban environments

    International Nuclear Information System (INIS)

    1995-06-01

    The application of ion beam analysis (IBA) techniques to aerosol pollution problems has been used in a number of countries since the late 1970's and early 1980's. The technique, however, had not been tested in Australia. This document is the final report of a project which aimed to establish a fine particle monitoring network covering the greater Wollongong/Sydney/ Newcastle ares, investigate the relationships between fuel combustion and fine particle aerosols in urban and non urban environments, add to the limited database of baseline information on concentrations of fine particles resulting from such processes as fossil fuel burning and industrial manufacturing, identify and quantify sources of fine particles in New South Wales, and introduce into Australia accelerator based IBA techniques for the analysis of filter papers obtained from large scale monitoring networks. These objectives were addressed by the project which identified and quantified some sources of fine particles and established some relationships between fuel combustion and fine aerosols. More work is required to fully quantify relationships between natural and anthropogenic fine particle sources. 24 tabs., 44 figs., 83 refs

  13. Combustion of Metals in Reduced-Gravity and Extraterrestrial Environment

    Science.gov (United States)

    Abbud-Madrid, A.; Omaly, P.; Branch, M. C.; Daily, J. W.

    1999-01-01

    As a result of the ongoing exploration of Mars and the several unmanned and manned missions planned for the future, increased attention has been given to the use of the natural resources of the planet for rocket propellant production and energy generation. Since the atmosphere of Mars consists of approximately 95% carbon dioxide (CO2), this gas is the resource of choice to be employed for these purposes. Unfortunately, CO2 is also a final product in most combustion reactions, requiring further processing to extract useful reactants such as carbon monoxide (CO), oxygen (O2), and hydrocarbons. An exception is the use Of CO2 as an oxidizer reacting directly with metal fuel. Since many metals burn vigorously with CO2, these may be used as an energy source and as propellants for an ascent/descent vehicle in sample-collection missions on Mars. In response to NASA's Human Exploration and Development of Space (HEDS) Enterprise to search for appropriate in-situ resource utilization techniques, this investigation will study the burning characteristics of promising metal/CO2 combinations. The use of reduced gravity is essential to eliminate the intrusive buoyant flows that plague the high-temperature metal reactions, to remove the destructive effect of gravity on the shape of molten metal samples, and to study the influence of radiative heat transfer from solid oxides undisturbed by natural convection. In studies with large metal specimens, the burning process is invariably influenced by strong convective currents that accelerate the reaction and shorten the burning times. Although these currents are nearly absent from small burning particles, the high emissivity of the flames, rapid reaction, small length scales, and intermittent explosions make the gathering of any useful information on burning rates and flame structure very difficult. This investigation has the ultimate goal of providing a careful probing of flame structure and dynamics by taking advantage of large, free

  14. The chemical industry - friend to the environment?

    International Nuclear Information System (INIS)

    1992-01-01

    ''The Chemical Industry - Friend to the Environment?'' was a symposium organised by the North East Region committee of the Industrial Division of the Royal Society of Chemistry. This volume contains typescripts from all the lectures given at the symposium. The general public appreciate the material comforts the Chemical Industry provides, for example textiles, ceramics, steel, speciality chemicals, drugs, prosthetics etc. However, for many their comfort is spoiled by the chemical poisoning of the environment through slag heaps, beaches and countryside littered with non-biodegradable unsightly plastic containers, poor air quality through NO x , CO 2 and chlorofluorocarbon emissions, and of course, nuclear waste. The occasional spillage of hazardous chemicals through road, rail and sea accidents do nothing to improve the Industry's image. The majority of these topics were discussed, though no one presumed to know how to remove the problems entirely but many suggestions were put forward as to how this might be achieved. Of the 13 papers presented three were specifically concerned with recycling of plastics, 9 with the environmental impacts of chemicals and one, which is indexed separately, was concerned with radioactive discharges into the environment from the Sellafield reprocessing plant. (Author)

  15. Computational fluid dynamics (CFD) analysis of an industrial gas turbine combustion chamber

    Energy Technology Data Exchange (ETDEWEB)

    Anzai, Thiago Koichi; Fontes, Carlo Eduardo; Ropelato, Karolline [Engineering Simulation and Scientic Software Ltda. (ESSS), Rio de Janeiro, RJ (Brazil)], E-mails: anzai, carlos.fontes, ropelato@esss.com.br; Silva, Luis Fernando Figueira da; Huapaya, Luis Enrique Alva [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil). Dept. of Mechanical Engineering], E-mail: luisfer.luisalva@esp.puc-rio.br

    2010-07-01

    The accurate determination of pollutant emission from gas turbine combustors is a crucial problem in situations when such equipment is subject to long periods of operation away from the design point. In such operating conditions, the flow field structure may also drastically differ from the design point one, leading to the presence of undesirable hot spots or combustion instabilities, for instance. A priori experiments on all possible operation conditions is economically unfeasible, therefore, models that allow for the prediction of combustion behavior in the full operation range could be used to instruct power plant operators on the best strategies to be adopted. Since the direct numerical simulation of industrial combustors is beyond reach of the foreseeable computational resources, simplified models should be used for such purpose. This works presents the results of the application to an industrial gas turbine combustion chamber of the CFD technique to the prediction of the reactive flow field. This is the first step on the coupling of reactive CFD results with detailed chemical kinetics modeling using chemical reactor networks, toward the goal of accurately predicting pollutant emissions. The CFD model considers the detailed geometrical information of such a combustion chamber and uses actual operating conditions, calibrated via an overall gas turbine thermodynamical simulation, as boundary conditions. This model retains the basic information on combustion staging, which occurs both in diffusion and lean premixed modes. The turbulence has been modeled using the SST-CC model, which is characterized by a well established regime of accurate predictive capability. Combustion and turbulence interaction is accounted for by using the Zimont et al. model, which makes use of on empirical expression for the turbulent combustion velocity for the closure of the progress variable transport equation. A high resolution scheme is used to solve the advection terms of the

  16. CRITERIA POLLUTANT EMISSIONS FROM INTERNAL COMBUSTION ENGINES IN THE NATURAL GAS INDUSTRY VOLUME 1. TECHNICAL REPORT

    Science.gov (United States)

    The report summarizes emission factors for criteria pollutants (NOx, CO, CH4, C2H6, THC, NMHC, and NMEHC) from stationary internal combustion engines and gas turbines used in the natural gas industry. The emission factors were calculated from test results from five test campaigns...

  17. Combustion and environment. A regulation in full evolution; Combustion et environnement. Une reglementation en pleine evolution

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This paper is a reprint of an article published in `Energie Plus` magazine which gives a synthesis of the different topics discussed during the conference. Two aspects are discussed: the energy regulations and the environmental regulations. The energy regulations concern the energy efficiency required for central heating plants of small (40 kW < P < 400 kW), medium and large (400 kW < P < 50 MW) size and the periodical control of these installations. The environmental regulations concern the combustion systems with a power comprised between 2 and 20 MW (design and siting, operation and maintenance, water effluents, atmospheric effluents), the turbines and engines with a power of 20 to 50 MW, and the big installations of combustion (P > 50 MW). The principal motivation of these regulations is the abatement of ecosystems acidification. (J.S.)

  18. Tunable Diode Laser Sensor for Monitoring and Control of Harsh Combustion Environments

    Energy Technology Data Exchange (ETDEWEB)

    VonDrasek, William; Melsio-Pubill, Anna

    2006-05-30

    This work represents the collaborative effort between American Air Liquide and Physical Sciences, Inc. for developing a sensor based on near-IR tunable diode lasers (TDL). The multi-species capability of the sensor for simultaneous monitoring of CO, O2, and H2O concentration as well as gas temperature is ideal for in-situ monitoring on industrial furnaces. The chemical species targeted are fundamental for controlling the combustion space for improved energy efficiency, reduced pollutants, and improved product quality, when coupling the measurement to a combustion control system. Several add-on modules developed provide flexibility in the system configuration for handling different process monitoring applications. For example, the on-Demand Power Control system for the 1.5 ?m laser is used for high particle density exhaust streams where laser transmission is problematic. For long-distance signal collection a fiber optic communication system is used to reduce noise pick-up. Finally, hardened modules to withstand high ambient temperatures, immune to EMF interference, protection from flying debris, and interfaced with pathlength control laser beam shielding probes were developed specifically for EAF process monitoring. Demonstration of these different system configurations was conducted on Charter Steel's reheat furnace, Imco Recycling, Inc. (now Aleris International, Inc.) aluminum reverberatory furnace, and Gerdau Ameristeel's EAF. Measurements on the reheat furnace demonstrated zone monitoring with the measurement performed close to the steel billet. Results from the aluminum furnace showed the benefit of measuring in-situ near the bath. In this case, low-level furnace optimization was performed and demonstrated 5% fuel savings. Monitoring tests on the EAF off-gas demonstrated the level of industrialization of the sensor to survive the harsh EAF environment. Long-term testing on the EAF has been on-going for over 6 months with essentially zero maintenance

  19. Numerical simulations of the industrial circulating fluidized bed boiler under air- and oxy-fuel combustion

    International Nuclear Information System (INIS)

    Adamczyk, Wojciech P.; Kozołub, Paweł; Klimanek, Adam; Białecki, Ryszard A.; Andrzejczyk, Marek; Klajny, Marcin

    2015-01-01

    Measured and numerical results of air-fuel combustion process within large scale industrial circulating fluidized bed (CFB) boiler is presented in this paper. For numerical simulations the industrial compact CFB boiler was selected. Numerical simulations were carried out using three-dimensional model where the dense particulate transport phenomenon was simultaneously modelled with combustion process. The fluidization process was modelled using the hybrid Euler-Lagrange approach. The impact of the geometrical model simplification on predicted mass distribution and temperature profiles over CFB boiler combustion chamber two kinds of geometrical models were used, namely the complete model which consist of combustion chamber, solid separators, external solid super-heaters and simplified boiler geometry which was reduced to the combustion chamber. The evaluated temperature and pressure profiles during numerical simulations were compared against measured data collected during boiler air-fuel operation. Collected data was also used for validating numerical model of the oxy-fuel combustion model. Stability of the model and its sensitivity on changes of several input parameters were studied. The comparison of the pressure and temperature profiles for all considered cases gave comparable trends in contrary to measured data. Moreover, some additional test was carried out the check the influence of radiative heat transfer on predicted temperature profile within the CFB boiler. - Highlights: • Hybrid Euler-Lagrange approach was used for modelling particle transport, air- and oxy-fuel combustion process. • Numerical results were validated against measured data. • The influence of different boiler operating conditions on calculated temperature profile was investigated. • New strategy for resolving particle transport in circulating fluidized bed was shown

  20. INDUSTRY-ENVIRONMENT PERCEPTION OF COLLEGE STUDENTS OF INDUSTRIAL ENGINEERING

    Directory of Open Access Journals (Sweden)

    Quetzalli Aguilar-Virgen

    2015-12-01

    Full Text Available The aim of this study was to analyze the perception of college students about their role in minimizing environmental impacts, applying the philosophy of SCP (sustainable consumption and production. It was designed and validated a questionnaire; which it was applied to 288 students with a confidence level of 95% and 10% error. Students are aware of the need to optimize their processes and make their businesses profitable. However, they lack more knowledge tools SCP to make the most effective, efficient and environmentally friendly processes. It is necessary for industry-environment paradigm change to achieve more sustainable production systems.

  1. Industrial emerging chemicals in the environment

    Directory of Open Access Journals (Sweden)

    Vojinović-Miloradov Mirjana B.

    2014-01-01

    Full Text Available In the recent time, considerable interest has grown concerning the presence of the emerging industrial chemicals, EmIC. They are contaminants that have possible pathway to enter to the environment and they are dominantly released by industrial and anthropogenic activities. EmIC are applied in different fields using as industrial chemicals (new and recently recognized, global organic contaminants (flame retardant chemicals, pharmaceuticals (for both human and animal uses, endocrine-modulating compounds, biological metabolites, personal care products, household chemicals, nanomaterial (energy storage products, lubricants, anticorrosive and agriculture chemicals and others that are applied to a wide variety of everyday items such as clothing, upholstery, electronics and automobile interiors. NORMAN (Network of reference laboratories for monitoring of emerging environmental pollutants has established an open, dynamic, list of emerging substances and pollutants. EmIC have been recently detected in the environment due to their long-term presence, pseudo-persistence and increased use. Improvements in sophisticated analytical methods and time integrative passive sampling have enabled the identification and quantification of EmIC, in very low concentrations (ppb, ppt and lower, which likely have been present in all environmental mediums for decades. Passive technology is an innovative technique for the time-integrated measurement of emerging contaminants in water, sediment, soil and air. Passive samplers are simple handling cost-effective tool that could be used in environmental monitoring programmes. These devices are now being considered as a part of an emerging strategy for monitoring a range of emerging industrial chemicals and priority pollutants in the aquatic environment. EmIC are substances that are not included in the routine monitoring programmes and whose fate, behaviour and (ecotoxicological effects are still not well understood. Emerging

  2. Co-combustion for fossil fuel replacement and better environment

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, M. Helena; Gulyurtlu, Ibrahim; Abelha, Pedro; Teixeira, P.; Crujeira, Teresa; Boavida, Dulce; Marques, F.; Cabrita, Isabel [INETI/DER, Lisboa (Portugal)

    2006-07-01

    The growing demand for energy and the requirements regarding CO{sub 2} emissions to comply with the Kyoto targets, together with crisis associated with the fuel supply, can be, to some degree, met by the use of renewable fuel sources, such as biomass. Although the use of biomass, originating from forests, could be beneficial, particularly in preventing fires, there are obstacles to achieve a sustainable supply of biomass in most European countries. In addition, there are also technical barriers as biomass combustion conditions may differ from those of coal, which could mean significant retrofitting of existing installations. The significance of this problem was recognized in the EU and a Project is being financed by the 6th Framework Programme, INETI from Portugal being the coordinator. Five EU countries plus Turkey participate in the project which aims at evaluating both the sustainable chain supply in the several countries, taking profit of the experience of northern European countries and the technical issues related with the co-combustion process, pollutant emission control and operational problems, such as fouling and slagging inside the boilers. At INETI, experimental work is being carried out, involving the characterization of several types of biomass and non-toxic residues. These materials are being burned on a pilot fluidized bed combustor, in order to evaluate combustion performance and improve conditions and synergies of fuel blends to control pollutant emissions and slagging tendency. Ashes produced are also being characterized, for composition and leachability, in order to evaluate possibilities of reutilization and compliance with landfilling regulations. In this paper a description of the project is presented, along with some of the results already obtained.

  3. Co-combustion for fossil fuel replacement and better environment

    Energy Technology Data Exchange (ETDEWEB)

    M. Helena Lopes; I. Gulyurtlu; P. Abelha; P. Teixeira; T. Crujeira; D. Boavida; F. Marques; I. Cabrita [INETI, Lisbon (Portugal)

    2006-07-01

    The growing demand for energy and the requirement regarding CO{sub 2} emissions, to comply with the Kyoto targets, together with crisis associated with the fuel supply, can be, to some degree, met by the use of renewable fuel sources, such as biomass. Although the use of biomass, originating from forests, could be beneficial, there are obstacles to achieve a sustainable supply of biomass in most European countries. In addition, there are also technical barriers as biomass combustion conditions may differ from those of coal, which could mean significant retrofitting of existing installations. The significance of this problem was recognized in the EU and a Project is being financed by the 6th Framework Programme, INETI from Portugal being the coordinator. Five EU countries plus Turkey participate in the project which aims at evaluating both the sustainable chain supply in the several countries, taking profit of the experience of northern European countries and the technical issues related with the co-combustion process, pollutant emission control and operational problems, such as fouling and slagging inside the boilers. At INETI, experimental work is being carried out, involving the characterization of several types of biomass and non-toxic residues. These materials are being burned on a pilot fluidized bed combustor, in order to evaluate combustion performance and improve conditions and synergies of fuel blends to control pollutant emissions and slagging tendency. Ashes produced are also being characterized, for composition and leachability, in order to evaluate possibilities of reutilization and compliance with landfilling regulations. In this paper a description of the project is presented, along with some of the results already obtained. 19 refs., 5 figs., 7 tabs.

  4. Soils in urban and industrial environments

    International Nuclear Information System (INIS)

    Burghardt, W.

    1994-01-01

    Urban areas are expanding rapidly. Therefore the interest in soil science activities on urban and industrial sites grows. The paper gives an overview of the research and mapping activities in Germany. A model of soils in urban ecosystems shows the relationships of development of soils and soil quality to land use. The water regime of soils is influenced by the characteristics of urban landscape and sealing. Of special interest are the typical substrates. Some properties of soils which develop on tipped substrates of natural material are discussed. Of importance are technological substrates as rubble, ash, slag, waste material and sludges in urban environments. Proposals of classification of urban and industrial soils are presented. For proper use by the municipal authorities availability and application of information on urban soils must be a part of research. (orig.) [de

  5. Analysis of Combustion Process in Industrial Gas Engine with Prechamber-Based Ignition System

    Directory of Open Access Journals (Sweden)

    Rafał Ślefarski

    2018-02-01

    Full Text Available Application of a pre-combustion chamber (PCC ignition system is one of the methods to improve combustion stability and reduce toxic compounds emission, especially NOx. Using PCC allows the operation of the engine at lean combustion conditions or the utilization of low calorific gaseous fuels such as syngas or biogas. The paper presents the results of an experimental study of the combustion process in two stroke, large bore, stationary gas engine GMVH 12 equipped with two spark plugs (2-SP and a PCC ignition system. The experimental research has been performed during the normal operation of the engine in an industrial compression station. It was observed that application of PCC provides less cycle-to-cycle combustion variation (more than 10% and nitric oxide and carbon monoxide emissions decreased to 60% and 26% respectively. The total hydrocarbon (THC emission rate is 25% higher for the engine equipped with PCC, which results in roughly two percent engine efficiency decrease. Another important criterion of engine retrofitting was the PCC location in the engine head. The experimental results show that improvement of engine operating parameters was recorded only for a configuration with one port offset by 45° from the axis of the main chamber. The study of the ignition delay angle and equivalence ratio in PCC did not demonstrate explicit influence on engine performance.

  6. ) Virtual Reality Environments For The Petroleum Industry

    International Nuclear Information System (INIS)

    Diembacher, F. X.

    2003-01-01

    Large screen immersive visualization has gained enormous momentum in the last few years. The oil industry has quickly appreciate the value virtual reality centers bring to the practising engineer and to asset teams. While early concepts emphasized visualization, people soon realized that virtual reality rooms offer more: they are places where people come together, they are places where people want to collaborate. Subsequently these environments were also called Decisionariums, Collaboration Centers, Visionariums, etc. GeoQuest branded these rooms iCenters, a term which encompasses all the potential usages of this environment. is tands for information, internet, interaction, interpretation, impact, etc. iCenters are used for interpretation and analysis of complex models (e.g. 3D seismic interpretation, viewing of simulation models with hundreds of thousands of cells) and for multi-disciplinary working (e.g. planning of advanced wells typically for (deep) offshore environments currently increases by several hundred percent being built in Nigeria-more are being planned. This concepts for building iCenters, examples of how oil companies around the world and in Nigeria use these environments to foster collaboration and reduce costs, and latest developments in the area of remote collaboration (i.e., connected iCenters)

  7. The industrial production of fuel elements; La fabrication en france des elements combustibles

    Energy Technology Data Exchange (ETDEWEB)

    Boussard, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires; Nadal, J [Societe Industrielle de Combustible Nucleaire (SICN), 75 - Paris (France); Pellen, A [Compagnie pour l' Etude et la Realisation de Combustibles Atomiques (CERCA), 75 - Paris (France)

    1964-07-01

    -pool type reactors. The authors show how the problem of the industrial production of rolled fuel elements has been solved in France, and give the three steps involved: 1 - Assembly of the plates made in the U.S.A., 2 - Rolling of the cores made in the U.S.A. to obtain the plates, 3 - Fabrication of the U-Al alloy and production of the cores. They then recall briefly the characteristics of the different fuel elements now in production. A description is given of the various stages of the production including information about the equipment; stress is laid on the extent of the controls carried out at each stage. In conclusion the authors consider the future development of this type of production taking into account the improvements planned and those which are possible. (authors) [French] Les auteurs traitent successivement de la fabrication industrielle des elements combustibles pour reacteurs de puissance de la filiere U naturel graphite-gaz et plus particulierement pour les centrales energetiques d'E.D.F. et de celle des elements combustibles a base d'U enrichi destines aux reacteurs experimentaux du type 'piscine'. 1ere Partie - LES ELEMENTS COMBUSTIBLES AVANCES POUR LES REACTEURS E.D.F.: Apres un bref rappel des caracteristiques des elements combustibles actuellement fabriques industriellement pour les reacteurs de MARCOULE et de CHINON, les auteurs indiquent les differentes etapes suivies pour aboutir au stade de la fabrication industrielle d'un element combustible nouveau, tant en ce qui concerne la gaine et eventuellement la chemise de graphite que le combustible lui-meme. Pour ce qui est de l'elaboration du combustible, ils decrivent les differentes operations en insistant sur les points originaux de la fabrication et de l'appareillage tels que: - coulees en moules chauds, - traitement thermique des alliages U.Mo 1 p. 100, - soudure des pastilles de fermeture des tubes, - gainage - controle aux differents stades. En ce qui concerne la fabrication des gaines, ils

  8. Soot Reactivity in Conventional Combustion and Oxy-fuel Combustion Environments

    DEFF Research Database (Denmark)

    Abián, María; Jensen, Anker D.; Glarborg, Peter

    2012-01-01

    A study of the reactivity of soot produced from ethylene pyrolysis at different temperatures and CO2 atmospheres toward O2 and CO2 has been carried out using a thermogravimetric analyzer. The purpose was to quantify how soot reactivity is affected by the gas environment and temperature history of...

  9. Ignition and Combustion of Bulk Metals in a Microgravity Environment

    Science.gov (United States)

    Branch, Melvyn C.; Daily, John W.; Abbud-Madrid, Angel

    1999-01-01

    Results of a study of heterogeneous and homogeneous combustion of metals in reduced gravity are presented. Cylindrical titanium and magnesium samples are radiatively ignited in pure-oxygen at 1 atm. Qualitative observations, propagation rates, and burning times are extracted from high-speed cinematography. Time-resolved emission spectra of gas-phase reactions are acquired with an imaging spectrograph. Lower propagation rates of the reacting mass on titanium and of ignition waves on magnesium are obtained at reduced gravity. These rates are compared to theoretical results from fire-spread analyses with a diffusion/convection controlled reaction. The close agreement found between experimental and theoretical propagation rates indicates the strong influence of natural-convection-enhanced oxygen transp6rt on burning rates. Lower oxygen flux and lack of condensed product removal appear to be responsible for longer burning times of magnesium gas-phase diffusion flames in reduced gravity. Spherically symmetric explosions in magnesium flames at reduced gravity (termed radiation-induced metal explosions, or RIME) may be driven by increased radiation heat transfer from accumulated condensed products to an evaporating metal core covered by a porous, flexible oxide coating. In titanium specimens, predominantly heterogeneous burning characterizes the initial steady propagation of the molten mass, while homogeneous gas-phase reactions are detected around particles ejected from the molten mixture. In magnesium specimens, band and line reversal of all the UV spectral systems of Mg and MgO are attributed to the interaction between small oxide particles and the principal gaseous emitters.

  10. Recovery Act: Oxy-Combustion Technology Development for Industrial-Scale Boiler Applications

    Energy Technology Data Exchange (ETDEWEB)

    Levasseur, Armand

    2014-01-01

    This Topical Report outlines guidelines and key considerations for design and operation of pulverized coal-fired boilers for oxy-combustion. The scope addressed includes only the boiler island, not the entire oxy-fired CO{sub 2} capture plant. These guidelines are primarily developed for tangential-fired boilers and focus on designs capable of dual air and oxy-fired operation. The guidelines and considerations discussed are applicable to both new units and existing boiler retrofits. These guidelines are largely based on the findings from the extensive 15 MW{sub th} pilot testing and design efforts conducted under this project. A summary level description is provided for each major aspect of boiler design impacted by oxy-combustion, and key considerations are discussed for broader application to different utility and industrial designs. Guidelines address the boiler system arrangement, firing system, boiler thermal design, ducting, materials, control system, and other key systems.

  11. Research on EHN additive on the diesel engine combustion characteristics in plateau environment

    Science.gov (United States)

    Sun, Zhixin; Li, Ruoting; Wang, Xiancheng; Hu, Chuan

    2017-03-01

    Aiming at the combustion deterioration problem of diesel engine in plateau environment, a bench test was carried out for the effects of EHN additive on combustion characteristics of the diesel engine with intake pressure of 0.68 kPa. Test results showed that with the full load working condition of 1 400 r/min: Cylinder pressure and pressure uprising rate decreased with EHN additive added in, mechanical load on the engine could be relieved; peak value of the heat release rate decreased and its occurrence advanced, ignition delay and combustion duration were shortened; cylinder temperature and exhaust gas temperature declined, thermal load on the engine could be relieved, output torque increased while specific oil consumption decreased, and effective thermal efficiency of diesel engine increased.

  12. Coal combustion products in Europe valuable raw materials for the construction industry

    Energy Technology Data Exchange (ETDEWEB)

    Berg, W. vom; Feuerborn, H.J. [European Coal Combustion Products Association e.V., Essen (Germany)

    2005-07-01

    Coal combustion products (CCPs) are formed with the production of electricity in coal-fired power plants. The production of these CCPs has been increased by the years due to legal requirements for flue gas cleaning. The utilisation of CCPS is well is established in some European countries, based on long term experience and technical as well as environmental benefits. As CCPs are defined as waste materials by existing legislation the power industry has to handle the stigma put on the products and hamper the beneficial use. (orig.)

  13. Research of power fuel low-temperature vortex combustion in industrial boiler based on numerical modelling

    Directory of Open Access Journals (Sweden)

    Orlova K.Y.

    2017-01-01

    Full Text Available The goal of the presented research is to perform numerical modelling of fuel low-temperature vortex combustion in once-through industrial steam boiler. Full size and scaled-down furnace model created with FIRE 3D software and was used for the research. All geometrical features were observed. The baseline information for the low-temperature vortex furnace process are velocity and temperature of low, upper and burner blast, air-fuel ratio, fuel consumption, coal dust size range. The obtained results are: temperature and velocity three dimensional fields, furnace gases and solid fuel ash particles concentration.

  14. A review of active control approaches in stabilizing combustion systems in aerospace industry

    Science.gov (United States)

    Zhao, Dan; Lu, Zhengli; Zhao, He; Li, X. Y.; Wang, Bing; Liu, Peijin

    2018-02-01

    Self-sustained combustion instabilities are one of the most plaguing challenges and problems in lean-conditioned propulsion and land-based engine systems, such as rocket motors, gas turbines, industrial furnace and boilers, and turbo-jet thrust augmenters. Either passive or active control in open- or closed-loop configurations can be implemented to mitigate such instabilities. One of the classical disadvantages of passive control is that it is only implementable to a designed combustor over a limited frequency range and can not respond to the changes in operating conditions. Compared with passive control approaches, active control, especially in closed-loop configuration is more adaptive and has inherent capacity to be implemented in practice. The key components in closed-loop active control are 1) sensor, 2) controller (optimization algorithm) and 3) dynamic actuator. The present work is to outline the current status, technical challenges and development progress of the active control approaches (in open- or closed-loop configurations). A brief description of feedback control, adaptive control, model-based control and sliding mode control are provided first by introducing a simplified Rijke-type combustion system. The modelled combustion system provides an invaluable platform to evaluate the performance of these feedback controllers and a transient growth controller. The performance of these controllers are compared and discussed. An outline of theoretical, numerical and experimental investigations are then provided to overview the research and development progress made during the last 4 decades. Finally, potential, challenges and issues involved with the design, application and implementation of active combustion control strategies on a practical engine system are highlighted.

  15. Micro-computer cards for hard industrial environment

    Energy Technology Data Exchange (ETDEWEB)

    Breton, J M

    1984-03-15

    Approximately 60% of present or future distributed systems have, or will have, operational units installed in hard environments. In these applications, which include canalization and industrial motor control, robotics and process control, systems must be easily applied in environments not made for electronic use. The development of card systems in this hard industrial environment, which is found in petrochemical industry and mines is described. National semiconductor CIM card system CMOS technology allows the real time micro computer application to be efficient and functional in hard industrial environments.

  16. ENVIRONMENT DEGRADATION BASIS FOR INDUSTRIAL SYSTEMS RENGINEERING

    Directory of Open Access Journals (Sweden)

    Rade Milićević

    2007-06-01

    Full Text Available Presently, the most environmental pressure in Serbia comes from urban areas and associated industries,with collection, treatment and disposal all kinds of hazardous waste, non hazardous waste, and waste water being among the most challenging issues.There is an urgency to prevent further environmental degradation and to initiate new environmental and industrial management practices. Industrial systems reingeneering is one of possible solutions, from the authors stand point.

  17. Apparatus and method for temperature mapping a turbine component in a high temperature combustion environment

    Science.gov (United States)

    Baleine, Erwan; Sheldon, Danny M

    2014-06-10

    Method and system for calibrating a thermal radiance map of a turbine component in a combustion environment. At least one spot (18) of material is disposed on a surface of the component. An infrared (IR) imager (14) is arranged so that the spot is within a field of view of the imager to acquire imaging data of the spot. A processor (30) is configured to process the imaging data to generate a sequence of images as a temperature of the combustion environment is increased. A monitor (42, 44) may be coupled to the processor to monitor the sequence of images of to determine an occurrence of a physical change of the spot as the temperature is increased. A calibration module (46) may be configured to assign a first temperature value to the surface of the turbine component when the occurrence of the physical change of the spot is determined.

  18. Environment, automotive fuels and petroleum industry

    International Nuclear Information System (INIS)

    Tabarelli, Davide

    1997-01-01

    After several years of delays, the italian environmental regulation concerning the oil industry has taken a leading role in Europe, especially starting from 1995, for benzene limits in gasoline. This article tries to estimate what are the anticipates costs for the italian industry due to a stricter legislation on gasoline compared to the rest of Europe

  19. Recovery Act: Oxy-Combustion Techology Development for Industrial-Scale Boiler Applications

    Energy Technology Data Exchange (ETDEWEB)

    Levasseur, Armand

    2014-04-30

    Alstom Power Inc. (Alstom), under U.S. DOE/NETL Cooperative Agreement No. DE-NT0005290, is conducting a development program to generate detailed technical information needed for application of oxy-combustion technology. The program is designed to provide the necessary information and understanding for the next step of large-scale commercial demonstration of oxy combustion in tangentially fired boilers and to accelerate the commercialization of this technology. The main project objectives include: • Design and develop an innovative oxyfuel system for existing tangentially-fired boiler units that minimizes overall capital investment and operating costs. • Evaluate performance of oxyfuel tangentially fired boiler systems in pilot scale tests at Alstom’s 15 MWth tangentially fired Boiler Simulation Facility (BSF). • Address technical gaps for the design of oxyfuel commercial utility boilers by focused testing and improvement of engineering and simulation tools. • Develop the design, performance and costs for a demonstration scale oxyfuel boiler and auxiliary systems. • Develop the design and costs for both industrial and utility commercial scale reference oxyfuel boilers and auxiliary systems that are optimized for overall plant performance and cost. • Define key design considerations and develop general guidelines for application of results to utility and different industrial applications. The project was initiated in October 2008 and the scope extended in 2010 under an ARRA award. The project completion date was April 30, 2014. Central to the project is 15 MWth testing in the BSF, which provided in-depth understanding of oxy-combustion under boiler conditions, detailed data for improvement of design tools, and key information for application to commercial scale oxy-fired boiler design. Eight comprehensive 15 MWth oxy-fired test campaigns were performed with different coals, providing detailed data on combustion, emissions, and thermal behavior over a

  20. The Bottom Line: Industry and the Environment in South Africa ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    All economic activity depends on the environment. This simple fact has spurred the international community into giving more and more attention to the environment in general and the environmental performance of industry in particular. The Bottom Line is a major new contribution to the debates on industry and the ...

  1. Combustion plans. Nordrhein-Westfalen opts for environment-friendly disposal of sewage sludge; Aktion Ofen. NRW plant umweltvertraegliche Klaerschlammverwertung

    Energy Technology Data Exchange (ETDEWEB)

    Fehrenbach, H.; Giegrich, J.; Knappe, F. [ifeu-Institut fuer Energie- und Umweltforschung GmbH, Heidelberg (Germany)

    2001-06-01

    According to the plans of the Nordrhein-Westfalen minister of the environment, sewage sludge will be banned as a fertiliser. Instead, it is to be disposed in accordance with the specifications of the Act on Recycling and Waste Management and the requirements of the recycling industry. This is the result of a study carried out on behalf of the Ministry which is summarised here. Combustion capacities will be required. [German] Auf die Verbrennungskapazitaeten in NRW rollt eine Klaerschlammlawine zu. Nach den Plaenen des Duesseldorfer Umweltministeriums soll die sogenannte landwirtschaftliche Verwertung kuenftig eingeschraenkt werden. Die Verwertung soll den gesetzlichen Vorgaben des Kreislaufwirtschaftsgesetzes und den Anforderungen der Kreislaufwirtschaft entsprechen. Dies ergibt sich aus einer Studie des Ministeriums, die hier zusammengefasst ist. (orig.)

  2. Ultra-High Efficiency and Low-Emissions Combustion Technology for Manufacturing Industries

    Energy Technology Data Exchange (ETDEWEB)

    Atreya, Arvind

    2013-04-15

    The purpose of this research was to develop and test a transformational combustion technology for high temperature furnaces to reduce the energy intensity and carbon footprint of U.S. manufacturing industries such as steel, aluminum, glass, metal casting, and petroleum refining. A new technology based on internal and/or external Flue Gas Recirculation (FGR) along with significant enhancement in flame radiation was developed. It produces "Radiative Flameless Combustion (RFC)" and offers tremendous energy efficiency and pollutant reduction benefits over and above the now popular "flameless combustion." It will reduce the energy intensity (or fuel consumption per unit system output) by more than 50% and double the furnace productivity while significantly reducing pollutants and greenhouse gas emissions (10^3 times reduction in NOx and 10 times reduction in CO & hydrocarbons and 3 times reduction in CO2). Product quality improvements are also expected due to uniform radiation, as well as, reduction in scale/dross formation is expected because of non-oxidative atmosphere. RFC is inexpensive, easy to implement, and it was successfully tested in a laboratory-scale furnace at the University of Michigan during the course of this work. A first-ever theory with gas and particulate radiation was also developed. Numerical programs were also written to design an industrial-scale furnace. Nine papers were published (or are in the process of publication). We believe that this early stage research adequately proves the concept through laboratory experiments, modeling and computational models. All this work is presented in the published papers. Important conclusions of this work are: (1) It was proved through experimental measurements that RFC is not only feasible but a very beneficial technology. (2) Theoretical analysis of RFC was done in (a) spatially uniform strain field and (b) a planar momentum jet where the strain rate is neither prescribed nor uniform. Four important non

  3. Industry and the Environment: A Danish Perspective

    DEFF Research Database (Denmark)

    Madsen, Henning; Ulhøi, John Parm

    1999-01-01

    of awareness and management principles is needed too. In consequence, environmental management techniques have been developed to assist companies to reduce, evaluate, monitor and control their environmental impact at a corporate level. But how has this development been adopted in industry, and has it resulted......Many countries have introduced comprehensive environmental protection laws during the last few decades in response to the direct, visible environmental impacts of industrial activities. This has often resulted in specific technical regulations, but it has gradually been recognized that a change...

  4. Ash quality and environmental quality assurance system in co-combustion - Co-combustion of forest industry waste

    International Nuclear Information System (INIS)

    Laine-Ylijoki, J.; Wahlstroem, M.

    2000-01-01

    The environmental acceptability and possible utilization of co-combustion ashes will have a significant influence on the wider use of co-combustion in the future. At present the correlation between currently used fuels, their mixture ratios, and quality variations in ashes are not known, which complicates the assessment of possible utilization and environmental acceptability of co-combustion ashes. The composition of ashes has also been found to vary significantly. Effective utilization requires that process variations to alter ash composition and quality variations are known in advance. The aim of the research was to characterize the fly ash from co- combustion of peat, wood and biological paper mill sludge produced under different fuel loadings, especially with and without sludge addition, ant to identify critical parameters influencing on the ash composition. The variations in the leaching properties of ashes collected daily were followed up. The environmental acceptability of the ashes produced under different fuel loadings, especially their suitability for use in road constructions, were evaluated. The project included also the preparation of laboratory reference material from ash material. Guidelines were developed for sampling, sample preparation and analysis, and leaching tests. Furthermore, a quality control system, including sampling strategies, sample analysis and leaching testing, was established

  5. The petroleum industry and environment law

    International Nuclear Information System (INIS)

    Bond, Richard

    1992-01-01

    A brief review is given of certain aspects of the petroleum industry's operation in the context of the growth in European Community environmental law. Topics covered include exploration and production, transportation by both pipeline and tanker, oil terminals, refineries and the abandonment and decommissioning of offshore installations. (UK)

  6. CRITERIA POLLUTANT EMISSIONS FROM INTERNAL COMBUSTION ENGINES IN THE NATURAL GAS INDUSTRY VOLUME II. APPENDICES A-I

    Science.gov (United States)

    The report summarizes emission factors for criteria pollutants (NOx, CO, CH4, C2H6, THC, NMHC, and NMEHC) from stationary internal combustion engines and gas turbines used in the natural gas industry. The emission factors were calculated from test results from five test campaigns...

  7. Strength and corrosion behavior of SiC - based ceramics in hot coal combustion environments

    Energy Technology Data Exchange (ETDEWEB)

    Breder, K.; Parten, R.J. [Oak Ridge National Lab., TN (United States)

    1996-08-01

    As part of an effort to evaluate the use of advanced ceramics in a new generation of coal-fired power plants, four SiC-based ceramics have been exposed to corrosive coal slag in a laboratory furnace and two pilot scale combustors. Initial results indicate that the laboratory experiments are valuable additions to more expensive pilot plant experiments. The results show increased corrosive attack with increased temperature, and that only slight changes in temperature may significantly alter the degree of strength degradation due to corrosive attack. The present results are part of a larger experimental matrix evaluating the behavior of ceramics in the coal combustion environment.

  8. Environment and industrial economy: Challenge of reproducibility

    International Nuclear Information System (INIS)

    Rullani, E.

    1992-01-01

    Historically and methodologically counterposed until now, the environmentalist and the economic approach to environmental problems need to be integrated in a new approach that considers, from one side, the relevance of the ecological equilibria for the economic systems and, from the other side, the economic dimension (in terms of investments and transformations in the production system) of any attempt to achieve a better environment. In order to achieve this integration, both approaches are compelled to give up some cultural habits that have characterized them, and have contributed to over-emphasize the opposition between them. The article shows that both approaches can converge into a new one, in which environment is no longer only an holistic, not bargainable, natural external limit to human activity (as in the environmentalist approach), nor simply a scarce and exhaustible resource (as economics tends to consider it); environment should instead become part of the reproducibility sphere, or, in other words, it must be regarded as part of the output that the economic system provides. This new approach, due to scientific and technological advances, is made possible for an increasing class of environmental problems. In order to do this, an evolution is required, that could be able to convert environmental goals into investment and technological innovation goals, and communicate to the firms the value society assigns to environmental resources. This value, the author suggests, should correspond to the reproduction cost. Various examples of this new approach are analyzed and discussed

  9. Toxic emissions during co-combustion of biomass-waste wood-lignite blends in an industrial boiler.

    Science.gov (United States)

    Samaras, P; Skodras, G; Sakellaropoulos, G P; Blumenstock, M; Schramm, K W; Kettrup, A

    2001-01-01

    The objectives of this work were to study the PCDD/F emissions during the co-combustion of waste wood/coal co-combustion in an industrial boiler and to determine the relation of the toxic emissions to the fuel properties. Co-combustion experiments were performed in a 13.8 MWthermal industrial moving grate combustor. The fuels which were examined in this study included Greek lignite, natural uncontaminated wood, power poles and medium density fibers (MDFs) which were by-products of the plant production process. Fuel blends were prepared by mixing single components in various concentrations. PCDD/F emissions were collected during experimental runs and were analyzed according to standard methods. Low PCDD/F emissions were obtained during the co-combustion tests, lower than the limit value of 0.1 ng TEQ/Nm3. The lowest values were observed during the combustion of fuel blends containing MDF, possibly due to the inhibitory action of some of the N-containing MDF ingredients, such as urea. No direct correlation was found between the PCDD/F and the copper emissions, while examination of the PCDD/F homologue patterns revealed the predominance of the lower chlorinated isomers over the higher ones.

  10. Biotechnology: Health care, agriculture, industry, environment

    Energy Technology Data Exchange (ETDEWEB)

    Sikyta, B; Pavlasova, E; Stejskalova, E

    1986-01-01

    New developments in different branches of biotechnology are discussed. The production of peptide hormones, new interferons and other lymphokines by the microbial and cell cultures, and new enzyme inhibitors of microbial origin are the most important for health care and pharmacy. The main direction in research in the agriculture represents the development of the new, very effective methods of nitrogen fixation and the production of animal growth hormones by gene manipulated microorganisms. One of the most important field of application of biotechnology is the chemical industry, c.f. microbial production of polymers and biotransformation of compounds previously produced by chemical methods (acrylamide, adipic acid, naphthalene conversion, etc.). Several novel methods of degradation of the cellulosic materials are mentioned and exploitation of biotechnology in environmental protection is also discussed.

  11. Management of health, safety and environment in process industry

    DEFF Research Database (Denmark)

    Duijm, Nijs Jan; Fiévez, C.; Gerbec, M.

    2008-01-01

    The present status of industrial HSE management in a number of EU member states is reviewed, with a focus on the integration of health, safety and environment in single management systems. The review provides insight into the standards and paradigms adopted by industry, and it identifies trends...

  12. The Diesel Combustion Collaboratory: Combustion Researchers Collaborating over the Internet

    Energy Technology Data Exchange (ETDEWEB)

    C. M. Pancerella; L. A. Rahn; C. Yang

    2000-02-01

    The Diesel Combustion Collaborator (DCC) is a pilot project to develop and deploy collaborative technologies to combustion researchers distributed throughout the DOE national laboratories, academia, and industry. The result is a problem-solving environment for combustion research. Researchers collaborate over the Internet using DCC tools, which include: a distributed execution management system for running combustion models on widely distributed computers, including supercomputers; web-accessible data archiving capabilities for sharing graphical experimental or modeling data; electronic notebooks and shared workspaces for facilitating collaboration; visualization of combustion data; and video-conferencing and data-conferencing among researchers at remote sites. Security is a key aspect of the collaborative tools. In many cases, the authors have integrated these tools to allow data, including large combustion data sets, to flow seamlessly, for example, from modeling tools to data archives. In this paper the authors describe the work of a larger collaborative effort to design, implement and deploy the DCC.

  13. Report on research achievement in relation with developing fundamental combustion control technologies in fiscal 1998. Research and development of high-performance industrial furnaces; 1998 nendo nensho seigyo kiban gijutsu no kaihatsu ni kansuru kenkyu seika hokokusho. Koseino kogyoro nado ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Development is intended to be made on fundamental combustion control technologies applicable to high-performance industrial furnaces that can reduce energy consumption and respond to environment preservation requirements. With an intention to achieve reduction in combustion exhaust gases such as carbon dioxide and nitrogen oxides, fundamental studies will be made on factors to decide flame shapes as represented by high-temperature combustion and flame shape control by utilizing microgravity environment, and researches will be made on combustion systems. Devices required for the experiments were fabricated to evaluate critical combustion characteristics of flames in furnaces including industrial furnaces, analyze and evaluate flame control parameters, and study low-pollution combustion technologies. Experimental methods acquired by 1997 were used for the experiments under the microgravity environment. Evaluation experiments were performed on flame shape control technologies and flame radiation characteristics, and basic experiments on the low-pollution combustion technologies. With these experiments, elucidation of the combustion mechanisms was launched by analyzing and evaluating the acquired data. A flame experimenting device for high-temperature preheated air completed by fiscal 1997 was used to acquire such combustion characteristics data as NOx discharge characteristics when the high-temperature preheated air is used. Based on the result thereof, verification was carried out on simulation models. (NEDO)

  14. New regulations, combustion, environment: responses for natural gas; Nouvelles reglementations, combustion, environnement: les reponses pour le gaz naturel

    Energy Technology Data Exchange (ETDEWEB)

    Le Peltier-Marc, A. [Gaz de France (GDF), 75 - Paris (France). Direction Commerciale

    1997-12-31

    The impacts of the new French regulations concerning low- to medium-power combustion equipment with regards to their energy sources, energy efficiency and pollution control, on natural gas fired boilers, are discussed: lower pollutant emission limits are set for SO{sub 2}, NO{sub x} and ashes. The decree gives new regulations concerning plant location, combustion control systems, plant monitoring and maintenance, and air pollution control measures such as chimney stack height and emission limits. The French national gas utility promotes environmental high performance boilers

  15. Development and Testing of Industrial Scale Coal Fired Combustion System, Phase 3

    Energy Technology Data Exchange (ETDEWEB)

    Bert Zauderer

    1998-09-30

    Coal Tech Corp's mission is to develop, license & sell innovative, lowest cost, solid fuel fired power systems & total emission control processes using proprietary and patented technology for domestic and international markets. The present project 'DEVELOPMENT & TESTING OF INDUSTRIAL SCALE, COAL FIRED COMBUSTION SYSTEM, PHASE 3' on DOE Contract DE-AC22-91PC91162 was a key element in achieving this objective. The project consisted of five tasks that were divided into three phases. The first phase, 'Optimization of First Generation 20 MMBtu/hr Air-Cooled Slagging Coal Tech Combustor', consisted of three tasks, which are detailed in Appendix 'A' of this report. They were implemented in 1992 and 1993 at the first generation, 20 MMBtu/hour, combustor-boiler test site in Williamsport, PA. It consisted of substantial combustor modifications and coal-fired tests designed to improve the combustor's wall cooling, slag and ash management, automating of its operation, and correcting severe deficiencies in the coal feeding to the combustor. The need for these changes was indicated during the prior 900-hour test effort on this combustor that was conducted as part of the DOE Clean Coal Program. A combination of combustor changes, auxiliary equipment changes, sophisticated multi-dimensional combustion analysis, computer controlled automation, and series of single and double day shift tests totaling about 300 hours, either resolved these operational issues or indicated that further corrective changes were needed in the combustor design. The key result from both analyses and tests was that the combustor must be substantially lengthened to maximize combustion efficiency and sharply increase slag retention in the combustor. A measure of the success of these modifications was realized in the third phase of this project, consisting of task 5 entitled: 'Site Demonstration with the Second Generation 20 MMBtu/hr Air-Cooled Slagging Coal Tech

  16. Influence of Environmentally Friendly and High-Efficiency Composite Additives on Pulverized Coal Combustion in Cement Industry

    Directory of Open Access Journals (Sweden)

    Zhiyong Wang

    2016-01-01

    Full Text Available 4 kinds of chemical reagents and 3 kinds of industrial wastes were selected as burning additives for 2 kinds of coals in cement industry. The work focused on the replacement of partial chemical reagents by industrial wastes, which not only reduced the cost and took full advantage of industrial wastes, but also guaranteed the high combustion efficiency and removed the NOX and SO2 simultaneously. The experiments were carried out in DTF. The combustion residues were analyzed by SEM and XRD. The results showed that the burnout rate was increased after adding the additives; meanwhile, the NOX and SO2 release concentration were reduced, but the degree of action varied for different additives and coals. The substitute of chemical reagents by industrial wastes was very effective; overall, the cold-rolled iron oxide worked better than others; the particles surface was tougher and the peaks of crystalline phase were lower than raw coal, which indicated that the additives played good roles in combustion process.

  17. Impacts of cement industries on environment and control measure

    International Nuclear Information System (INIS)

    Hashmi, H.N.; Malik, H.N.; Naushad, Z.

    2005-01-01

    Utilization of cement as building material is gaining more importance. Cement industries around the world are contributing in global and as well as local pollution. In Pakistan most of the cement industries are constructed in remote areas without any proper environmental impact assessment. Unawareness of peoples toward sustainable environment and due to lack of job opportunities, dwellers are demanding employment rather than clean environment from title-holder of the industry. Air pollution caused by cement industries is harmful to the human's health, spoils and erodes building surface, corrodes metals, weakens textiles, deteriorates atmospheric visibility, affects plant life and leads to ecological imbalances. To investigate environmental impact of cement industries in Pakistan, environmental conditions around and inside the five cement industries in the vicinity of Taxila city are studied. To inspect the whole scenario, air pollution control devices in these industries were also examined in detail. These industries are using Electrostatic Precipitators and Baghouses to control air pollution (dust particulates). Proper caring of these equipment is necessary for better results. Detailed study shows that emissions from their stacks and dust particulates are causing problems. Health consultants in study area are much worry about the health of workers and environmental degradation in the vicinity of these industries. The comparison of air pollution control devices shows that Baghouses are environmental friendly. Considering the field conditions it is also concluded that involvement of government and environmental pollution control agencies is much more necessary. (author)

  18. Valorization of used tyres as fuel substitute in cement industry; Valorisation des pneus usages comme combustible de substitution en cimenterie

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1999-03-01

    According to the French syndicate of cement industry, more than 350000 t of worn tyres are produced each year in France, among which only 143000 t are reused in retreading, exported as used tyres or valorized in cement industry. The rest is generally tipped or burnt in the open-air. In cement kilns, the organic matters of tyres are completely burnt while the metal belts supply the necessary amount of iron to the cement composition. The combustion of tyres produces no black smoke, no smell and no ash and has no significant influence on the effluents of cement factories: gases are directly filtered in the kiln by the important mass of raw materials which acts as quicklime. In 1997, 31500 t of used tyres were burnt in the seven French cement factories over 34 that use this kind of fuel and represents 1.5% of the total energy needs. This substitution ratio could easily reach 10 to 15% without leading to any additional environmental or technical problem. A project of collection and valorization of used tyres has been developed by the French ministry of environment and aims at completely eliminating tyres tipping since July 1, 2002. In order to illustrate the French policy of tyres valorization, two examples of actions are presented in this paper: the first one is carried out by the Michelin manufacturer in order to facilitate the recycling of civil engineering tyres, and the second is carried out by Ciments d`Origny company at the Rochefort factory where tyres are used as fuel substitutes. (J.S.)

  19. Fundamentals of Turbulent and Multi-Phase Combustion

    CERN Document Server

    Kuo, Kenneth Kuan-yun

    2012-01-01

    Detailed coverage of advanced combustion topics from the author of Principles of Combustion, Second Edition Turbulence, turbulent combustion, and multiphase reacting flows have become major research topics in recent decades due to their application across diverse fields, including energy, environment, propulsion, transportation, industrial safety, and nanotechnology. Most of the knowledge accumulated from this research has never been published in book form-until now. Fundamentals of Turbulent and Multiphase Combustion presents up-to-date, integrated coverage of the fundamentals of turbulence

  20. A Benchmark Environment Motivated by Industrial Control Problems

    OpenAIRE

    Hein, Daniel; Depeweg, Stefan; Tokic, Michel; Udluft, Steffen; Hentschel, Alexander; Runkler, Thomas A.; Sterzing, Volkmar

    2017-01-01

    In the research area of reinforcement learning (RL), frequently novel and promising methods are developed and introduced to the RL community. However, although many researchers are keen to apply their methods on real-world problems, implementing such methods in real industry environments often is a frustrating and tedious process. Generally, academic research groups have only limited access to real industrial data and applications. For this reason, new methods are usually developed, evaluated...

  1. Business environment of nuclear power industry in Korea

    International Nuclear Information System (INIS)

    Lee, Yoon Young

    2003-01-01

    In Korea, there are total of 18 Nuclear Power Plants in operation as of the end of 2002 and 6 more plants are under construction. The first project for the Advanced Power Reactor (APR) 1400 nuclear power plant is being launched to provide reliable electricity economical competitiveness in Korea. The competitive business environment both globally and in Korea, where the power industry is undergoing significant restructuring, is requiring the Korean nuclear industry to continually improve the economic associated with nuclear power. Introduction of the APR 1400 design and continued improvement of local capabilities are two of the ways that the industry is responding to the challenge. (author)

  2. Nuclear physics and optoelectronics presence in industry, medicine and environment

    International Nuclear Information System (INIS)

    Robu, Maria; Peteu, Gh.

    2000-01-01

    This paper reveals applications of Nuclear Physics and Optoelectronics in numerous fields of interest in industry, medicine, environment. In the first part of the work basic elements are analyzed, among which: - the large possibilities offered by the investigation, analysis and testing techniques based on nuclear physics and optoelectronics; - the superior qualitative and quantitative characteristics of these techniques, with varied applicability in fields from industry, medicine and environment. These applications refers to: - elemental analyses of content and impurities; - non-destructive testing with X and gamma radiations; - investigations with radioactive and activable tracers in trophic chains as for instance, ground-vegetation-products-consumers-environment, including also the systemic pollution factors; - complex investigations in the interface tritium-vegetation-environment-humans; - techniques and radiopharmaceutical products for medical investigations; - determinations and automatic control for levels, density, thickness, humidity, surfaces covering; - monitoring by means of remote sensing for the evaluation of the environment, vegetation and pollution factors; - applications and production of laser and UV installations; - connections through optical fibres resistant to radiations; - imaging and medical bioengineering; - advances in X ray, laser and ultrasonic radiology; - monitoring with radiations beams. In the final part, there are presented examples of optoelectronics and nuclear physics applications in fields in industry, medicine and environment, with special stress on their basic characteristics and efficiency. (authors)

  3. The John Zink Hamworthy combustion handbook

    CERN Document Server

    Baukal, Charles E

    2013-01-01

    Despite the length of time it has been around, its importance, and vast amounts of research, combustion is still far from being completely understood. Issues regarding the environment, cost, and fuel consumption add further complexity, particularly in the process and power generation industries. Dedicated to advancing the art and science of industrial combustion, The John Zink Hamworthy Combustion Handbook, Second Edition: Volume 3 - Applications offers comprehensive, up-to-date coverage of equipment used in the process and power generation industries. Under the leadership of Charles E. Baukal

  4. Combustion gas cleaning in the ceramic tile industry: technical guide; Nettoyage des fumees de combustion dans l'industrie ceramique: guide technique

    Energy Technology Data Exchange (ETDEWEB)

    Lezaun, F.J. [ENAGAS-Grupo Gas Natural (Spain); Mallol, G.; Monfort, E. [instituto de Tecnologia Ceramica, ITC (Spain); Busani, G. [Agenzia Regionale per la Prevenzione e l' Amiente, ARPA (Spain)

    2000-07-01

    This document presents a summary of a technical guide drawn up on combustion gas cleaning systems in ceramic frit and tile production. The guide describes the method to be followed for selecting the best possible solutions for reducing pollutant concentrations in different emission sources, in accordance with current regulatory requirements and the CET recommendation. There are three sources of combustion gas air emissions that need to be cleaned in ceramic tile and frit production and they are usually related to the following process stages: slip spray drying, tile firing and frit melting. The different nature of the emissions means that different substances will need to be cleaned in each emission. Thus, in spray drying and frit melting, the only species to be cleaned are suspended particles, while in tile firing, it is also necessary to reduce the fluorine concentration. The systems analysed in this guide are mainly wet cleaning systems, bag filters and electrostatic precipitators. In the study, the efficiency of these cleaning systems is compared at each emission source from a technical and economic point of view, and concrete solutions are put forward in each case, together with a list of suppliers of the technologies involved. (authors)

  5. Power generation from municipal and industrial wastes with particular reference to sewage combustion

    Energy Technology Data Exchange (ETDEWEB)

    Braun, B. (Vereinigte Kesselwerke AG, Duesseldorf, West Germany); Lauer, H. (Badische Anilin- und Soda-Fabrik AG, Ludwigshafen am Rhein, West Germany)

    1980-01-01

    Some characteristic features and modern technological concepts employed in large sewage combustion plants are examined. Particular attention is given to the plants in Krefeld, Wuppertal, and Ludwigshafen, Germany, and in Ajinomoto, Japan.

  6. Entropy Analyses of Droplet Combustion in Convective Environment with Small Reynolds Number

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xiaobin; ZHANG Wei; ZHANG Xuejun

    2013-01-01

    This paper analyzes the entropy generation rate of simple pure droplet combustion in a temperature-elevated air convective environment based on the solutions of flow,and heat and mass transfer between the two phases.The flow-field calculations are carried out by solving the respective conservation equations for each phase,accounting for the droplet deformation with the axisymmetric model.The effects of the temperature,velocity and oxygen fraction of the free stream air on the total entropy generation rate in the process of the droplet combustion are investigated.Special attention is given to analyze the quantitative effects of droplet deformation.The results reveal that the entropy generation rate due to chemical reaction occupies a large fraction of the total entropy generated,as a result of the large areas covered by the flame.Although,the magnitude of the entropy generation rate per volume due to heat transfer and combined mass and heat transfer has a magnitude of one order greater than that due to chemical reaction,they cover a very limited area,leading to a small fraction of the total entropy generated.The entropy generation rate due to mass transfer is negligible.High temperature and high velocity of the free stream are advantageous to increase the exergy efficiency in the range of small Reynolds number (<1) from the viewpoint of the second-law analysis over the droplet lifetime.The effect of droplet deformation on the total entropy generation is the modest.

  7. Industrial energy efficiency: Achieving success in a difficult environment

    Energy Technology Data Exchange (ETDEWEB)

    Castellow, Carl

    2010-09-15

    Energy use and the resulting environmental impacts are major points of concern for the world in the 21st century. Opinions that define the challenges of sustainable energy options are as diverse as the proposed solutions. The industrial sector is a key area both from the standpoint of the amount of energy consumed and the magnitude of the energy options that exist there. However, history has shown that success in the industrial energy sector requires careful planning and consideration of the unique challenges of the manufacturing environment.

  8. Atmospheric corrosion of metals in industrial city environment

    Directory of Open Access Journals (Sweden)

    Elzbieta Kusmierek

    2015-06-01

    Full Text Available Atmospheric corrosion is a significant problem given destruction of various materials, especially metals. The corrosion investigation in the industrial city environment was carried out during one year exposure. Corrosion potential was determined using the potentiometric method. The highest effect of corrosion processes was observed during the winter season due to increased air pollution. Corrosion of samples pre-treated in tannic acid before the exposure was more difficult compared with the samples without pretreatment. The corrosion products determined with the SEM/EDS method prove that the most corrosive pollutants present in the industrial city air are SO2, CO2, chlorides and dust.

  9. Atmospheric corrosion of metals in industrial city environment.

    Science.gov (United States)

    Kusmierek, Elzbieta; Chrzescijanska, Ewa

    2015-06-01

    Atmospheric corrosion is a significant problem given destruction of various materials, especially metals. The corrosion investigation in the industrial city environment was carried out during one year exposure. Corrosion potential was determined using the potentiometric method. The highest effect of corrosion processes was observed during the winter season due to increased air pollution. Corrosion of samples pre-treated in tannic acid before the exposure was more difficult compared with the samples without pretreatment. The corrosion products determined with the SEM/EDS method prove that the most corrosive pollutants present in the industrial city air are SO2, CO2, chlorides and dust.

  10. Environment issues and the future of the transport industry

    Energy Technology Data Exchange (ETDEWEB)

    Shiller, J W [Ford Motor Company, Dearborn, MI (USA)

    1992-01-01

    The motor vehicle industry must make the necessary investment in products and technology to meet the competitive and environmental challenges of the future. Discussion is presented of: the history of motor vehicles, the relationship of motor vehicles to the environment, the state of climate change knowledge, future economic development and the transport sector, the changing structure of the motor vehicle fleet, traffic congestion, alternative fuels, investments in transport, the European Energy Charter, The US Energy Strategy, the North American free trade agreement, and the economics of the automobile industry in Japan/South East Asia and the developing countries. 61 refs., 29 figs., 28 tabs.

  11. Reconstruction of industrial boiler type DKVR-13 aiming for combustion of waste materials from oil-yielding production

    International Nuclear Information System (INIS)

    Gadzhanov, P.

    1997-01-01

    One of the methods for improving of the energy efficiency is the use of a secondary energy resources such as waste products from industrial processes. In case of the oil extraction a great amount of waste product (sunflower shells) with a good thermal potential is available. During the industrial process from 100 kg raw material 15 kg shells are obtained. The combustion heat is about 1700 kJ/kg. The volatile compounds yield is 66.1%. An installation has been constructed intended to use the waste product from the extraction, consisting of: a water tube boiler with a steam capacity of 20 t/h and two PKM-12 type flue boilers and two DKVR 10-13 type water tube boilers. The DKVR 10-13 type boilers are designed for the production of 22.77 kg/s saturated steam with pressure 1.28 MPa and temperature 194 o C. They have an unified constructional schemes with a two-drum evaporating system and a natural circulation. The furnace has a horizontally evaporation beam washed by the gas flux. The reconstruction is aimed to create condition for the use of the sunflower shells as a main fuel and the natural gas or other fuel as additional. The scheme is one using the sloping bed combustion. 70% of the steam production is due to the shells combustion. Calculations for the grid parameters have been done. An additional heater improves the efficiency with 4.5% and the expected annual fuel saving is 300 t. The introduction of hot air (165 o C) provides both combustion and ecological benefits

  12. Combustion engineering

    CERN Document Server

    Ragland, Kenneth W

    2011-01-01

    Introduction to Combustion Engineering The Nature of Combustion Combustion Emissions Global Climate Change Sustainability World Energy Production Structure of the Book   Section I: Basic Concepts Fuels Gaseous Fuels Liquid Fuels Solid Fuels Problems Thermodynamics of Combustion Review of First Law Concepts Properties of Mixtures Combustion StoichiometryChemical EnergyChemical EquilibriumAdiabatic Flame TemperatureChemical Kinetics of CombustionElementary ReactionsChain ReactionsGlobal ReactionsNitric Oxide KineticsReactions at a Solid SurfaceProblemsReferences  Section II: Combustion of Gaseous and Vaporized FuelsFlamesLaminar Premixed FlamesLaminar Flame TheoryTurbulent Premixed FlamesExplosion LimitsDiffusion FlamesGas-Fired Furnaces and BoilersEnergy Balance and EfficiencyFuel SubstitutionResidential Gas BurnersIndustrial Gas BurnersUtility Gas BurnersLow Swirl Gas BurnersPremixed-Charge Engine CombustionIntroduction to the Spark Ignition EngineEngine EfficiencyOne-Zone Model of Combustion in a Piston-...

  13. Atmospheric corrosion of metals in industrial city environment

    OpenAIRE

    Kusmierek, Elzbieta; Chrzescijanska, Ewa

    2015-01-01

    Atmospheric corrosion is a significant problem given destruction of various materials, especially metals. The corrosion investigation in the industrial city environment was carried out during one year exposure. Corrosion potential was determined using the potentiometric method. The highest effect of corrosion processes was observed during the winter season due to increased air pollution. Corrosion of samples pre-treated in tannic acid before the exposure was more difficult compared with the s...

  14. Aerosols: generation and role in medicine, industry and environment

    International Nuclear Information System (INIS)

    Nambi, K.S.V.; Sapra, B.K.

    1998-01-01

    This book covers a wide range of topics in aerosol sciences. Areas covered for detailed evaluation with respect to the role of aerosols are industry, medicine, health care and environment, besides basic studies. Knowledge in the areas, specially on generation of aerosols and their role in those fields are briefly summarised and problems for future work are highlighted. Articles relevant to INIS are indexed separately

  15. Effect of Simulated High Hydrogen Content Combustion Environments on Abradable Properties of Ceramic Turbine Coatings

    Science.gov (United States)

    Basu Majumder, Madhura

    Air plasma sprayed (APS) abradable coatings are used in the turbine hot section to reduce the stator-rotor gap, minimizing gas leakage. These coatings are designed to exhibit controlled removal of material in thin layers when the turbine blades sweep through the coating, which protects the mechanical integrity of the turbine blade. In an effort to lower CO2 emissions, high H2 content fuel is being explored. This change in chemical composition of the fuel may affect the microstructure, abradability and durability of the coatings at turbine operational temperatures. The presence of high water vapor in the combustion chamber leads to accelerated degradation of the sacrificial coating materials. In this work, zirconia based composite materials with a machinable phase and varied porosity have been used to study microstructural evolution, thermal and chemical stability of the phases and abradable characteristics of baseline coating systems in both humid and dry environments. Investigation of the mechanisms that control the removal of materials and performance of abradable coatings through thermo-mechanical tests will be discussed.

  16. Standardization of ionizing radiation in industry and environment

    International Nuclear Information System (INIS)

    1990-03-01

    In this account a new standardization system is described. This system is intended for the protection of environment, people and employees against the harmful consequences of ionizing radiation. This new system is based upon the actual knowledge of the harmful effects of ionizing radiation and joins to the starting points and objectives of the environment- and industry-protectional policies and is explained for both policies separately. The starting points and objectives are presented of the actual environment- and industry-protectional policies and of the radiation-protection policy pursued up till now. The harmful effects of radiation, the importance of the of the most recent scientific developments and the results of the investigation performed in the framework of this account, are described. Conclusions about these harmful affects are given. The systematics of the standardization are described. Subsequently are considered the radiation sources, their classification, the risk limits for regular situations and for large accidents, the justification principle and the ALARA-principle, emission- and product requirements, objectives for environment quality, standards for combat of the consequences of accidents, the policy with regard to 'building and dwelling' and finally standards for protection of employees. The consequences of the systematics of standardization, which are described in this account, are indicated for environment- as well as industry-protectional policy. Per radiation-source category the corresponding risks are indicated and at which term which continuation activities are necessary. The consequences for the set of instruments and some international aspects are considered. Finally the activity list gives a survey of the continuation activities and the terms at which these have to be carried out. (H.W.). 4 figs.; 1 tab

  17. Combined distiller waste utilisation and combustion gases desulphurisation method. The case study of soda-ash industry

    Energy Technology Data Exchange (ETDEWEB)

    Kasikowski, Tomasz; Buczkowski, Roman; Cichosz, Marcin; Lemanowska, Eliza [Faculty of Chemistry, Nicolas Copernicus University, ul. Gagarina 7, 87-100 Torun (Poland)

    2007-09-15

    In this paper, a concept of technology that can be helpful for lowering the negative influence of the synthetic (based on the Solvay process) soda ash plant on the natural environment is presented. We describe the desulphurisation of combustion gases from the factory's power plant, which is based on their absorption in the overflow of distiller waste. The excess of lime milk, which is added in the process of ammonia regeneration from filter liquor, results in a strong alkalinity of distiller waste. The high pH of distiller waste favours absorption of acidic combustion gases. The laboratory-scale tests showed about 80% efficiency of the desulphurisation process. The suspension samples we obtained consist mainly of CaCO{sub 3}. We suggest using the obtained solid phase as an adsorbent-insert in Fluidised Bed Combustion technology (FBC). Based on raw material prices, production costs, and average sell prices of the product, economic analysis of innovation was executed. Profits from employing the method presented come mainly from reduction of environmental fees. The sensitivity analysis of cost showed that the application of the desulphurisation process causes cost reduction in soda-ash production accounting for EUR 150 thousand per year (excluding depreciation) in Poland, and EUR 11,700 thousand per year (excluding depreciation) in Sweden. It has been found that the latter value is similar to the positive environmental impact of this innovation expressed in monetary units (EUR 10,350 thousand per year, excluding depreciation). (author)

  18. RESULTS OF THE DIESEL COMBUSTION CHAMBER OPTIMIZED DESIGN IN THE MULTICRITERIAL TASK ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    A. Wrublewski

    2015-12-01

    Full Text Available The results of optimized designing of the higi-speed vehicle diesel engine combustion chamber based on application of the method of parameters space investingation are given. The optimal form of the combustion chamber and the direction of fuel jets at adjusted pressure rate and other functional resrictions are determined according to three criteria of quality – fuel consumption, hard particles and nitric oxide emissions.

  19. Sludge in the pulp and paper industry in Sweden, part II[Combustion of]; Slam fraan skogsindustrin, fas II

    Energy Technology Data Exchange (ETDEWEB)

    Gyllenhammar, Marianne; Herstad Svaerd, Solvie; Kjoerk, Anders; Larsson, Sara; Wennberg, Olle [S.E.P. Scandinavian Energy Project AB, Goeteborg (Sweden); Aamand, Lars-Erik [Chalmers Univ. of Technology, Goeteborg (Sweden); Eskilsson, David [Swedish National Testing and Research Inst., Boraas (Sweden)

    2003-11-01

    During part II of this research program combustible sludge from the pulp and paper industry has been studied in detail. 560,000 tonnes of sludge per year (calculated as dry sludge) are produced in Sweden. The energy potential in the produced sludge is about 2 TWh/year. Today 1 TWh/year is produced in the pulp and paper mill's own boilers. This means that additional energy can be utilized from this material. An objective of this program has been to decide whether or not there are sludge types which are favourable respectively difficult to combust. By mixing different sludge types, or other waste products, emissions and/or problems during combustion can be minimized. These possibilities have been studied thoroughly in this program. A lot of sludge samples have been studied in laboratory scale at SP and in full-scale at Chalmers 12 MW CFB boiler. As a complement to the practical tests S.E.P. has done research regarding different aspects of sludge as a fuel; for example handling of sludge and regional drying. The results of 40 sintering tests at SP showed that the sintering temperature during combustion of sludge in a fluidised bed, with silica sand as bed material, varied between <850 deg C and >1100 deg C. The evaluation showed that the alkali content in the ash had the largest influence on the sintering temperature. Other factors were less important. During the tests at Chalmers eleven different sludge samples have been combusted together with wood pellets. Initially there were problems with the feeding to the boiler for some of the sludge samples. When the fuel feeding problems were solved the combustion took place without any problems. When sludge is co-combusted together with a 'clean' base fuel such as wood pellets the sulphur-, nitrogen- and chloride contents in the sludge have a large impact on the emissions. The normal way to reduce sulphur dioxide but also hydrogen chloride is to add lime in different positions into and after the boiler. In

  20. Compensation of damage to the environment caused by industrial catastrophes

    International Nuclear Information System (INIS)

    Smets, H.

    1986-01-01

    Industrial accidents have caused considerable damage to the environment and the author reviews third party liability systems and insurance in the different countries concerned. He considers that indemnification of major accidents costing between 50 millions and several billions French francs requires the setting up of an elaborate system which makes provision for high amounts. The most dangerous activities in the oil and chemical sectors should be subject to special requirements regarding insurance or financial security patterned on the system for nuclear installations. (NEA) [fr

  1. Evaluation of gas radiation models in CFD modeling of oxy-combustion

    International Nuclear Information System (INIS)

    Rajhi, M.A.; Ben-Mansour, R.; Habib, M.A.; Nemitallah, M.A.; Andersson, K.

    2014-01-01

    Highlights: • CFD modeling of a typical industrial water tube boiler is conducted. • Different combustion processes were considered including air and oxy-fuel combustion. • SGG, EWBM, Leckner, Perry and WSGG radiation models were considered in the study. • EWBM is the most accurate model and it’s considered to be the benchmark model. • Characteristics of oxy-fuel combustion are compared to those of air–fuel combustion. - Abstract: Proper determination of the radiation energy is very important for proper predictions of the combustion characteristics inside combustion devices using CFD modeling. For this purpose, different gas radiation models were developed and applied in the present work. These radiation models vary in their accuracy and complexity according to the application. In this work, a CFD model for a typical industrial water tube boiler was developed, considering three different combustion environments. The combustion environments are air–fuel combustion (21% O 2 and 79% N 2 ), oxy-fuel combustion (21% O 2 and 79% CO 2 ) and oxy-fuel combustion (27% O 2 and 73% CO 2 ). Simple grey gas (SGG), exponential wide band model (EWBM), Leckner, Perry and weighted sum of grey gases (WSGG) radiation models were examined and their influences on the combustion characteristics were evaluated. Among those radiation models, the EWBM was found to provide close results to the experimental data for the present boiler combustion application. The oxy-fuel combustion characteristics were analyzed and compared with those of air–fuel combustion

  2. Applications in Electronics Pervading Industry, Environment and Society

    CERN Document Server

    2016-01-01

    This book provides a thorough overview of cutting-edge research on electronics applications relevant to industry, the environment, and society at large. A wide spectrum of application domains are covered, from automotive to space and from health to security, and special attention is devoted to the use of embedded devices and sensors for imaging, communication, and control. The book is based on the 2014 APPLEPIES Conference, held in Rome, which brought together researchers and stakeholders to consider the most significant current trends in the field of applied electronics and to debate visions for the future. Areas covered by the conference included information communication technology; biotechnology and biomedical imaging; space; secure, clean, and efficient energy; the environment; and smart, green, and integrated transport. As electronics technology continues to develop apace, constantly meeting previously unthinkable targets, further attention needs to be directed toward the electronics applications and th...

  3. 2015 Applications in Electronics Pervading Industry, Environment and Society Conference

    CERN Document Server

    2017-01-01

    This book provides a thorough overview of cutting-edge research on electronics applications relevant to industry, the environment, and society at large. It covers a broad spectrum of application domains, from automotive to space and from health to security, while devoting special attention to the use of embedded devices and sensors for imaging, communication and control. The book is based on the 2015 ApplePies Conference, held in Rome, which brought together researchers and stakeholders to consider the most significant current trends in the field of applied electronics and to debate visions for the future. Areas addressed by the conference included information communication technology; biotechnology and biomedical imaging; space; secure, clean and efficient energy; the environment; and smart, green and integrated transport. As electronics technology continues to develop apace, constantly meeting previously unthinkable targets, further attention needs to be directed toward the electronics applications and the ...

  4. RESEARCH ON COMPLEX, LARGE INDUSTRIAL PROJECTS IN TRANSNATIONAL ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Florin POPESCU

    2016-12-01

    Full Text Available More and more projects from different industrial sectors developed in transnational environment are becoming more characterized as "complex". In recent years, there has been much discussion and controversy about the complexity of the projects, and, despite what has been written and said in various papers, journals and professional conferences, more confusion than clarification was created, complexity of projects being interpreted differently from one author to another. Most of the literature studied is based on linear, analytical and rational approach, focusing on the size of project management planning and control and actually less on projects that are characterized as taking place and grow into a dynamic socio-human environment in a continuous change. This study represents a critical review of existing theoretical models found in literature, highlighting their limitations. The output of this literature study represents an integration of different approaches concerning complexity under one umbrella to provide a common understanding of the evolution of this concept.

  5. Combustion strategy : United Kingdom

    Energy Technology Data Exchange (ETDEWEB)

    Greenhalgh, D. [Heriot-Watt Univ., Edingburgh, Scotland (United Kingdom). School of Engineering and Physical Sciences

    2009-07-01

    The United Kingdom's combustion strategy was briefly presented. Government funding sources for universities were listed. The United Kingdom Research Councils that were listed included the Arts and Humanities Research Council (AHRC) and the Biotechnology and Biological Sciences Research Council (BBSRC); the Engineering and Physical Sciences Research Council (EPSRC); the Economic and Social Research Council; the Medical Research Council; the Natural Environment Research Council; and the Science and Technology Facilities Council. The EPSRC supported 65 grants worth 30.5 million pounds. The combustion industry was noted to be dominated by three main players of which one was by far the largest. The 3 key players were Rolls-Royce; Jaguar Land Rover; and Doosan Babcock. Industry and government involvement was also discussed for the BIS Technology Strategy Board, strategy technology areas, and strategy application areas.

  6. The North Sea oil and gas industry and the environment

    International Nuclear Information System (INIS)

    Kingston, P.F.

    1992-01-01

    The North Sea environment is described. Inputs into this environment from oil and gas installations are relatively modest compared with the pollution from effluent discharged or directly dumped into the sea by its highly populated and industrialized enclosing nations. Hydrocarbon discharges provide the greatest input from the oil and gas industry and make a substantial contribution to the total hydrocarbon input. The sources from offshore installations are analysed. Accidental spills, flaring, atmospheric emissions and other inputs are discussed. Biological and chemical monitoring over many year has shown that the most common environmental effect is a marked fall in the number of species of marine fauna and an increase in the number of individuals. These effects appear within 1000 metres of the installation. The spread of contaminants may be more widespread than the biological response indicates, though. The cost of environmental protection is briefly considered. A need to determined the wider impact of low levels of contamination detected at greater distances from platform activities and the development of effective environmental management plans are identified as two objectives for the future. (UK)

  7. A comprehensive Radiological Investigation for the Industrial Helwan City Environment

    International Nuclear Information System (INIS)

    Wafaa, F.; El-Tahawy, M.S.; El-Mongy, S.A.; Sayed, S.A.

    2000-01-01

    The non nuclear process industries supply a considerable contribution to the radiological pollution of the environment. A comprehensive radiological studies for determining radiation levels and radionuclides distribution in the environment of Helwan city (the major industrial region in Cairo) are carried out. The radioactivity concentrations of Ra-226, Th-232, K-40 and the man made Cs-137 in samples of soil plants, ores and products collected from and around some of Helwan factories were analyzed using high resolution gamma spectrometers. A bad correlation between the observed 137 Cs and 40 K was found. The collected water and factories waste water samples were also analyzed by laser fluorimetry. The absorbed dose rates due to the natural radioactivity in the soil one meter above the ground and the radium equivalent activities are calculated and presented. The representative external hazard index values for the soil samples to be used as construction materials are also estimated and given. The results obtained are considered as reference values to be used in the case of emergency action and as baseline data for drawing a radiological map of the city

  8. New Turbo Compound Systems in Automotive Industry for Internal Combustion Engine to Recover Energy

    Science.gov (United States)

    Chiriac, R.; Chiru, A.; Condrea, O.

    2017-10-01

    The large amount of heat is scattered in the internal combustion engine through exhaust gas, coolant, convective and radiant heat transfer. Of all these residual heat sources, exhaust gases have the potential to recover using various modern heat recovery techniques. Waste heat recovery from an engine could directly reduce fuel consumption, increase available electrical power and improve overall system efficiency and if it would be used a turbochargers that can also produce energy. This solution is called turbo aggregation and has other ways to develop it in other areas of research like the electrical field. [1-3

  9. Combustion physics

    Science.gov (United States)

    Jones, A. R.

    1985-11-01

    Over 90% of our energy comes from combustion. By the year 2000 the figure will still be 80%, even allowing for nuclear and alternative energy sources. There are many familiar examples of combustion use, both domestic and industrial. These range from the Bunsen burner to large flares, from small combustion chambers, such as those in car engines, to industrial furnaces for steel manufacture or the generation of megawatts of electricity. There are also fires and explosions. The bountiful energy release from combustion, however, brings its problems, prominent among which are diminishing fuel resources and pollution. Combustion science is directed towards finding ways of improving efficiency and reducing pollution. One may ask, since combustion is a chemical reaction, why physics is involved: the answer is in three parts. First, chemicals cannot react unless they come together. In most flames the fuel and air are initially separate. The chemical reaction in the gas phase is very fast compared with the rate of mixing. Thus, once the fuel and air are mixed the reaction can be considered to occur instantaneously and fluid mechanics limits the rate of burning. Secondly, thermodynamics and heat transfer determine the thermal properties of the combustion products. Heat transfer also plays a role by preheating the reactants and is essential to extracting useful work. Fluid mechanics is relevant if work is to be performed directly, as in a turbine. Finally, physical methods, including electric probes, acoustics, optics, spectroscopy and pyrometry, are used to examine flames. The article is concerned mainly with how physics is used to improve the efficiency of combustion.

  10. Determination of surface temperatures in combustion environments using thermographic phosphors; Wandtemperaturmessungen in Verbrennungsumgebungen mithilfe thermographischer Phosphore

    Energy Technology Data Exchange (ETDEWEB)

    Bruebach, J.; Kissel, T. [TU Darmstadt (Germany). FG Energie- und Kraftwerkstechnik; Dreizler, A. [TU Darmstadt (Germany). FG Reaktive Stroemungen und Messtechnik

    2009-07-01

    A phosphor thermometry system was characterised with regard to all sources of systematic errors. Exemplary, the point measurement of a surface temperature and the determination of wall-normal temperature gradients within an optically accessible combustion chamber are outlined. Furthermore, the temporal temperature characteristic at the quartz ring of an optically accessible engine is presented. (orig.)

  11. Combustion measurements in an industrial gas-fired flat-glass furnace

    Energy Technology Data Exchange (ETDEWEB)

    Newbold, J; Webb, B W; McQuay, M Q [Brigham Young Univ., Provo, UT (United States). Mechanical Engineering Dept.; Huber, A M [Ford Motor Co., Glass Div., Dearborn, MI (United States)

    1997-06-01

    Profiles of velocity, species concentration (O{sub 2}, CO and CO{sub 2}), wall incident radiative heat flux and temperature are reported in the combustion space of a regenerative, side-port, 550t/day, gas-fired flat-glass furnace. A region exists of fast-moving gases near the glass, with axial velocity components exceeding 20 m s{sup -1}, and a large recirculation zone near the crown. Temperatures as high as 1985 K in the flame and as low as 1750 K in the recirculation zone are reported. A region of intense reaction is observed near the glass, with large concentration gradients and incomplete combustion even in the tail of the flame. Local incident radiant fluxes on the crown were nearly uniform spatially at a level of 680 kW m{sup -2}. In the portnecks, flat inlet velocity profiles were measured with a magnitude of approximately 11 m s{sup -1}. Significant variations were observed in the exhaust profiles of most measured variables. Large errors in exhaust mass balance suggest a complex, three-dimensional flow with recirculation zones along the side walls of the portnecks. A nominal preheat air temperature of 1420 k and a variation of exhaust temperatures between 1630 K and 1835 K were noted. O{sub 2} concentrations as high as 8.4% were measured at the exit, suggesting a bypass of oxygen-rich flow around the flame. CO{sub 2} concentrations were the highest near the batch, where the glass reactions are the most intense. (Author)

  12. Advanced coal-fueled industrial cogeneration gas turbine system -- combustion development

    Energy Technology Data Exchange (ETDEWEB)

    LeCren, R.T.

    1994-06-01

    This topical report summarizes the combustor development work accomplished under the subject contract. The objective was to develop a combustion system for the Solar 4MW Type H Centaur gas turbine generator set which was to be used to demonstrate the economic, technical and environmental feasibility of a direct coal-fueled gas turbine in a 100 hour proof-of-concept test. This program started with a design configuration derived during the CSC program. The design went through the following evolution: CSC design which had some known shortcomings, redesigned CSC now designated as the Two Stage Slagging Combustor (TSSC), improved TSSC with the PRIS evaluated in the IBSTF, and full scale design. Supporting and complimentary activities included computer modelling, flow visualization, slag removal, SO{sub x} removal, fuel injector development and fuel properties evaluation. Three combustor rigs were utilized: the TSSC, the IBSTF and the full scale rig at Peoria. The TSSC rig, which was 1/10th scale of the proposed system, consisted of a primary and secondary zone and was used to develop the primary zone performance and to evaluate SO{sub x} and slag removal and fuel properties variations. The IBSTF rig which included all the components of the proposed system was also 1/10th scale except for the particulate removal system which was about 1/30th scale. This rig was used to verify combustor performance data obtained on the TSSC and to develop the PRIS and the particulate removal system. The full scale rig initially included the primary and secondary zones and was later modified to incorporate the PRIS. The purpose of the full scale testing was to verify the scale up calculations and to provide a combustion system for the proof-of-concept engine test that was initially planned in the program.

  13. A concept for ubiquitous robotics in industrial environment

    Science.gov (United States)

    Sallinen, Mikko; Heilala, Juhani; Kivikunnas, Sauli

    2007-09-01

    In this paper a concept for industrial ubiquitous robotics is presented. The concept combines two different approaches to manage agile, adaptable production: firstly the human operator is strongly in the production loop and secondly, the robot workcell will be more autonomous and smarter to manage production. This kind of autonomous robot cell can be called production island. Communication to the human operator working in this kind of smart industrial environment can be divided into two levels: body area communication and operator-infrastructure communication including devices, machines and infra. Body area communication can be supportive in two directions: data is recorded by means of measuring physical actions, such as hand movements, body gestures or supportive when it will provide information to user such as guides or manuals for operation. Body area communication can be carried out using short range communication technologies such as NFC (Near Field communication) which is RFID type of communication. In the operator-infrastructure communication, WLAN or Bluetooth -communication can be used. Beyond the current Human Machine interaction HMI systems, the presented system concept is designed to fulfill the requirements for hybrid, knowledge intensive manufacturing in the future, where humans and robots operate in close co-operation.

  14. Nuclear Regulator Knowledge Management in a Dynamic Nuclear Industry Environment

    International Nuclear Information System (INIS)

    Turner, J.

    2016-01-01

    Full text: The paper outlines the experiences to date in developing mature knowledge management within the UK’s nuclear regulatory body The Office for Nuclear Regulation (ONR). In 2010 concerns over the loss of knowledge due to the age profile within the organization instigated a review of knowledge management and the development of a knowledge management initiative. Initially activities focused on knowledge capture but in order to move to through life knowledge transfer, knowledge management was then aligned with organizational resilience initiatives. A review of progress highlighted the need to better engage the whole organization to achieve the desired level of maturity for knowledge management. Knowledge management activities now cover organizational culture and environment and all aspects of organizational resilience. Benefits to date include clear understanding of core knowledge requirements, better specifications for recruitment and training and the ability to deploy new regulatory approaches. During the period of implementing the knowledge management programme ONR undertook several organizational changes in moving to become a separate statutory body. The UK nuclear industry was in a period of increased activity including the planning of new nuclear reactors. This dynamic environment caused challenges for embedding knowledge management within ONR which are discussed in the paper. (author

  15. Polymethylmethacrylate combustion in a narrow channel apparatus simulating a microgravity environment

    Science.gov (United States)

    Bornand, Garrett Randall

    Fire safety is an important part of engineering when human lives are at stake. From everyday homes to spacecraft that can cost hundreds of millions of dollars. The research in this thesis attempts to provide scientific evidence that the apparatus in question successfully simulates microgravity and can possibly replace NASA's current test method for spacecraft fire safety. Flame spread tests were conducted with thermally thick and thermally thin polymethylmethacrylate (PMMA) samples to study flame spread behavior in response to environmental changes. The tests were conducted using the San Diego State University Narrow Channel Apparatus (SDSU NCA) as well as within the Microgravity Science Glovebox (MSG) on the International Space Station (ISS). The SDSU NCA can suppress buoyant flow in horizontally spreading flames, and is currently being investigated as a possible replacement or complement to NASA's current material flammability test standard for non-metallic solids, NASA-STD-(I)-6001B Test 1. The buoyant suppression attained in the NCA allows tests to be conducted in a simulated microgravity environment-a characteristic that NASA's Test 1 lacks since flames present in Test 1 are driven by buoyant flows. The SDSU NCA allows for tests to be conducted at various opposed flow oxidizer velocities, oxygen percent by volume, and total pressure to mimic various spacecraft and habitat atmospheres. Tests were conducted at 1 atm pressure, thin fuel thickness of 50 and 75 microns, thick fuel thickness ranging from 3 mm to 5.6 mm, opposed oxidizer velocity ranging from 10 to 25 cm/s, and oxygen concentration by volume at 21, 30, and 50 percent. The simulated microgravity flame spread results were then compared to true microgravity experiments including; testing conducted on the International Space Station (ISS) under the Burning and Suppression of Solids (BASS) research, NASA's 5.2 second Drop Tower, and Micro-Gravity Laboratory's (MGLAB) 4.5 second Drop Tower. Data was also

  16. Combustion of Methanol Droplets in Air-Diluent Environments with Reduced and Normal Gravity

    Directory of Open Access Journals (Sweden)

    Benjamin Shaw

    2012-01-01

    Full Text Available Reduced and normal gravity combustion experiments were performed with fiber-supported methanol droplets with initial diameters in the 1 mm size range. Experiments were performed with air-diluent mixtures at about 0.101 MPa and 298 K, where carbon dioxide, helium, or xenon was separately used as the diluent gas. Results indicate that ambient gas transport properties play an important role in determining flammability and combustion behaviors including burning rates and radiant heat output histories of the droplets. Droplets would burn with significantly higher mole fractions of xenon than helium or carbon dioxide. In reduced gravity, droplets would burn steadily with a xenon mole fraction of 0.50 but would not burn steadily if helium or carbon dioxide mole fractions were 0.50. Comparison with previous experimental data shows that ignitability and combustion characteristics of droplets are influenced by the fuel type and also the gravitational level. Burning rates were about 40% to 70% higher in normal gravity than in reduced gravity. Methanol droplets also had burning rates that were typically larger than 1-propanol burning rates by about 20% in reduced gravity. In normal gravity, however, burning rate differences between the two fuels were significantly smaller.

  17. Biomass utilization for green environment: Co-combustion of diesel fuel and producer gas in thermal application

    International Nuclear Information System (INIS)

    Hussain, A.; Ani, F.N.; Mehamed, A.F.

    2007-01-01

    Study of co-combustion of diesel oil and producer gas from a gasifier, individually as well as combined, in an experimental combustion chamber revealed that the producer gas can be co-combusted with liquid fuel. The process produced more CO, NO/sub x/, SO/sub 2/ and CO/sub 2/ as compared to the combustion of diesel oil alone; the exhaust temperature for the process was higher than the diesel combustion alone. (author)

  18. Infrared monitoring of combustion

    International Nuclear Information System (INIS)

    Bates, S.C.; Morrison, P.W. Jr.; Solomon, P.R.

    1991-01-01

    In this paper, the use of Fourier Transform Infrared (FT-IR) spectroscopy for combustion monitoring is described. A combination of emission, transmission, and reflection FT-IR spectroscopy yields data on the temperature and composition of the gases, surfaces and suspended particles in the combustion environment. Detection sensitivity of such trace exhaust gases as CO, CO 2 , SO 2 , NO x , and unburned hydrocarbons is at the ppm level. Tomographic reconstruction converts line-of-sight measurements into spatially resolved temperature and concentration data. Examples from various combustion processes are used to demonstrate the capabilities of the technique. Industrial measurements are described that have been performed directly in the combustion zone and in the exhaust duct of a large chemical recovery boiler. Other measurements of hot slag show how FT-IR spectroscopy can determine the temperature and optical properties of surfaces. In addition, experiments with water droplets show that transmission FT-IR data yield spectra that characterize particle size and number density

  19. Apparatus for examination of irradiated fuel elements of industrial reactors at Marcoule; Appareillage d'examen des elements combustibles des piles industrielles de Marcoule

    Energy Technology Data Exchange (ETDEWEB)

    Pesenti, P; Wallet, Ph [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The authors describe a viewing and measurement cell for the slugs of Marcoule industrial reactors. This cell allows visual inspection, and photography of slugs. Length measurements are also made possible by horizontal motion of the slug both in translation and rotation. (author) [French] Les auteurs decrivent une cellule d'observation et de mesure des elements combustibles des piles industrielles de Marcoule. La cellule permet l'examen a vue, la photographie, la radioscopie et la radiographie des elements combustibles. Elle permet en outre la mesure de longueurs sur ces elements, ces derniers pouvant etre deplaces horizontalement en translation, et en rotation. (auteur)

  20. FEATURES MANAGEMENT OF INDUSTRIAL ENTERPRISES IN AN UNSTABLE ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Andrey Vladimirovich Velikoselsky

    2014-10-01

    Full Text Available High variability of the external and internal environment of the company determines the characteristics of the industrial enterprise management. Under these conditions, a high importance is the professionalism of the management team. The main task of the head is not only in maintaining the functioning of the production system, but also to improve and, in some cases, and the creation of new, more efficient production system. Managers involved in these tasks, it is necessary to continuously monitor requirements and adapt to changing external conditions of functioning of enterprises (units. To do this, it is advisable to use an appropriate organizational structure.In an innovative organizational structure of the functional manager is aimed at continuous development of the company and its most important part is the study of the formation and representation of staff about the goals and methods of achieving them, the development of the basic values of the personnel, the formation of organic relationships and connections, ensuring its harmonious cooperation in the development of the enterprise. In order to achieve a coherent interaction of employees needed concordance, which can significantly improve the efficiency and safety.

  1. Applied Operations Research: Augmented Reality in an Industrial Environment

    Science.gov (United States)

    Cole, Stuart K.

    2015-01-01

    Augmented reality is the application of computer generated data or graphics onto a real world view. Its use provides the operator additional information or a heightened situational awareness. While advancements have been made in automation and diagnostics of high value critical equipment to improve readiness, reliability and maintenance, the need for assisting and support to Operations and Maintenance staff persists. AR can improve the human machine interface where computer capabilities maximize the human experience and analysis capabilities. NASA operates multiple facilities with complex ground based HVCE in support of national aerodynamics and space exploration, and the need exists to improve operational support and close a gap related to capability sustainment where key and experienced staff consistently rotate work assignments and reach their expiration of term of service. The initiation of an AR capability to augment and improve human abilities and training experience in the industrial environment requires planning and establishment of a goal and objectives for the systems and specific applications. This paper explored use of AR in support of Operation staff in real time operation of HVCE and its maintenance. The results identified include identification of specific goal and objectives, challenges related to availability and computer system infrastructure.

  2. Operational measurements in radioprotection in the industrial and medical environments

    International Nuclear Information System (INIS)

    Rodde, S.; Vial, Th.; Truffert, H.; Kramar, R.; Batalla, A.; Roine, Ph.; Pin, A.; Lahaye, Th.; Rodde, S.; Bordy, J.M.; Paquet, F.; Veres, A.; Cadiou, A.; Branthonne, J.Y.; Noel, A.; Laloubere, L.; Moreau, St.; Gensdarmes, F.; Marques, S.; Lestang, M.; Valendru, N.; Tranchant, Ph.; Martel, P.; Bernhard, S.; Chareyre, P.; Gardin, I.; Casanova, Ph.; De Vita, A.; Tenailleau, L.; Masson, B.; Feret, B.; Guerin, M.; Guillot, L.; Gaultier, E.

    2009-01-01

    This document gathers the slides of the available presentations given during these conference days. Thirty presentations are assembled in the document and deal with: 1 - enforcement circular of the labor code dispositions relative to workers protection against ionizing radiation hazards (T. Lahaye); 2 - context and regulatory evolutions - public health code (S. Rodde); 3 - references and perspectives in external dosimetry (J.M. Bordy); 4 - CIPR's Committee 2 works (F. Paquet); 5 - from protection data to measurement data (A. Pin); 6 - dosimetric control in radiotherapy (A. Veres); 7 - calibration of irradiation measurement devices in industrial environment (A. Cadiou); 8 - calibration and verification of nuclear measurement devices (J.Y. Branthonne); 9 - calibration of measurement devices in medical environment (J.M. Bordy); 10 - quality control in radiotherapy (A. Batalla); 11 - in-vivo dosimetry in radiotherapy (A. Noel); 12 - calibration metrology of fixed post irradiation sensors (L. Laloubere); 13 - design requirements for the radiological zoning and the wastes cleanliness of Flamanville 3 EPR reactor (S. Moreau); 14 - efficiency of aerosol capture systems used in CNPE EDF (F. Gensdarmes); 15 - mobile surveillance means of the atmospheric contamination of CNPE EDF's reactor building (S. Marques and M. Lestang); 16 - experience feedback about the security gates at EDF's nuclear facilities (N. Valendru); 17 - metrology needs for radioprotection technical controls (P. Tranchant); 18 - technical evaluation of a flowmeter/dosemeter in the framework of the regulatory control of X-ray electric generators used in radio-diagnosis (P. Martel); 19 - reinforced natural radioactivity - the case of radon measurement (S. Bernhard); 20 - fires during radioactive materials transport (P. Chareyre); 21 - measurement in the framework of medical examinations: radiology service (A. Noel); 22 - operational measurements in nuclear medicine (I. Gardin); 23 - from the operational

  3. The Bottom Line: Industry and the Environment in South Africa ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Bottom Line is a major new contribution to the debates on industry and the ... and the environmental management of small and medium-sized enterprises. ... book will appeal to industrial managers, environmentalists, lawyers, engineers, ...

  4. Sandia Combustion Research: Technical review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    This report contains reports from research programs conducted at the Sandia Combustion Research Facility. Research is presented under the following topics: laser based diagnostics; combustion chemistry; reacting flow; combustion in engines and commercial burners; coal combustion; and industrial processing. Individual projects were processed separately for entry onto the DOE databases.

  5. Screening of candidate corrosion resistant materials for coal combustion environments -- Volume 4. Final report, January 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Boss, D.E.

    1997-12-31

    The development of a silicon carbide heat exchanger is a critical step in the development of the Externally-Fired Combined Cycle (EFCC) power system. SiC is the only material that provides the necessary combination of resistance to creep, thermal shock, and oxidation. While the SiC structural materials provide the thermomechanical and thermophysical properties needed for an efficient system, the mechanical properties of the SiC tubes are severely degraded through corrosion by the coal combustion products. To obtain the necessary service life of thousands of hours at temperature, a protective coating is needed that is stable with both the SiC tube and the coal combustion products, resists erosion from the particle laden gas stream, is thermal-shock resistant, adheres to SiC during repeated thermal shocks (start-up, process upsets, shut-down), and allows the EFCC system to be cost competitive. The candidate protective materials identified in a previous effort were screened for their stability to the EFCC combustion environment. Bulk samples of each of the eleven candidate materials were prepared, and exposed to coal slag for 100 hours at 1,370 C under flowing air. After exposure the samples were mounted, polished, and examined via x-ray diffraction, energy dispersive spectroscopy, and scanning electron microscopy. In general, the alumina-based materials behaved well, with comparable corrosion depths in all five samples. Magnesium chromite formed a series of reaction products with the slag, which included an alumina-rich region. These reaction products may act as a diffusion barrier to slow further reaction between the magnesium chromite and the slag and prove to be a protective coating. As for the other materials; calcium titanate failed catastrophically, the CS-50 exhibited extension microstructural and compositional changes, and zirconium titanate, barium zironate, and yttrium chromite all showed evidence of dissolution with the slag.

  6. Assessment of the radiation risk following from exploitation of Polish brown coals. Part 1. Brown coal in Polish industry; preparation of the method of determining the concentrations of main natural radioisotopes appearing in brown coal and its combustion products

    International Nuclear Information System (INIS)

    Jasinska, M.; Niewiadomski, T.; Schwabenthan, J.

    1982-01-01

    Poland is rich in deposits of brown coal applicable for large-scale industry. These deposits are estimated at about 13.5.10 9 tons. In the near future, one-half of the electric power produced in Poland will be generated by power plants using brown coal. As a result, the yearly burden of the environment in Poland will amount to about 15.10 6 tons of ashes and slag, and about 0.79.10 6 tons of fly ash emitted into the atmosphere. Concentrations of radioactive elements in wastes following from the use of brown coal may in some cases be as much as 12 times higher that occuring from combustion products of lignite coal. Distribution of these wastes to the environment affects the population, through inhalation of fly-ashes, consumption of radioactively contaminated products and through living in dwellings constructed of building materials produced using industrial wastes. In order to determine the concentrations of 226 Ra, 232 Th and 40 K in brown coal and in products of its combustion, the method of identifying these elements through gamma-spectrometry has been prepared. Concentrations of 210 Pb and 210 Po will be determined using the method of electrodeposition on metallic silver, which has been tested in the laboratory. (author)

  7. Nitrous Oxide from Combustion and Industry: Chemistry, Emissions and Control Protoxyde d'azote provenant de la combustion et de l'industrie : chimie, émissions et techniques de réduction

    Directory of Open Access Journals (Sweden)

    De Soete G.

    2006-11-01

    Full Text Available After an Introductory Part, presenting a survey of the present knowledge of nitrous oxide chemistry related to fossil fuel combustion and flue gas treatment, as a background for the understanding of emission factors, the paper deals successively with the average N2O emission factors from combustion and other industrial sources, and gives guidelines for appropriate N2O control technology ; with respect to the former item, some comments and criticisms on the 1991 OEDC/IPCC Report are formulated. As far as updated emission sources are concerned, emphasis is put on those which presently constitute issues : emissions from fluidized bed combustors, emissions caused by non catalytic selective NO reduction by ammonia and urea injection, N2O emissions caused by the use of automotive three-way catalysts as well as emissions from nitric acid and adipic acid manufacturing and from municipal wastes and sewage sludges incineration. Comments on the 1991 OEDC/IPCC Report mainly emphasize : (1 the surprising absence of emission factors from stationary combustion facilities and the inadequacy of some of the scarcely presented data, (2 the strange ignorance of the important effect of aging of three-way catalysts on the emission of N2O from gasoline vehicles. These omissions are the more surprising since reliable information in these two fields were already available at the period the OEDC Report was issued and or revised. For the assessment of adequate N2O control technologies, there is an urgent need for further R&D work. Presently existing understanding of homogeneous and heterogeneous N2O chemistry may provide interesting hints for N2O control, either by gas phase treatment or by catalytic reduction, depending on the concentration levels present in the off-gases to be treated. Le but de cet article est double : d'une part il fait le point sur les facteurs d'émission de N2O provenant de la combustion des combustibles fossiles et de certains autres secteurs de l'industrie

  8. Combustion of a fuel mix containing animal waste, industry and household waste in FB-boilers; Foerbraenning av en braenslemix bestaaende av animaliskt avfall, industri- och hushaallsavfall i FB-pannor

    Energy Technology Data Exchange (ETDEWEB)

    Pettersson, Anita; Herstad Svaerd, Solvie; Moradian, Farzad

    2012-11-01

    The aim of this project is to evaluate how the operation conditions and the combustion chemistry is changed in a Bubbling Fluidized Bed (BFB) Boiler when adding approx. 20 wt-% Biomal into the fuel mixture. The following issues were addressed in the project: 1. How does the new chemical composition of the fuel mix influence bed agglomeration, deposit growth, ash flows, flue gases and particle size distribution? 2. Is it possible to run the boiler at a reduced bed temperature of about 750 deg C due to the increased moisture content originating from the biomal fuel? The project is based on combustion tests in the two Waste to Energy boilers at 20 MWth each owned by Boraas Energy and Environment AB (BEM). Furthermore, results from the Waste Refinery Project 'Reduced bed temperature in FB-boilers burning waste - part II' has been used as reference in some cases. At normal conditions the boilers are run on a fuel mixture containing 80 % sorted industrial waste and 20 % household waste. This fuel mixture consists mainly of paper, plastics and wood. In Boraas the organic part of the household waste is sorted out and used for biogas production. With the addition of biomal, which consists of animal by-products crushed to a pumpable fuel, the chemical composition of the fuel mixture is changed to some extent. The results from the combustion tests shows that biomal influences the chemical fuel composition, but also that there are large variations in the ordinary waste fuel composition as well. The most evident changes with addition of biomal are: 1. Increased moisture. 2. Reduced heat value. 3. Increased amount nitrogen, calcium and phosphorus. 4. Decreased amount lead due to the low concentration in biomal. However, there were no changes in sodium, potassium, sulphur and chlorine, elements important for increased/reduced fuel related problems, derived from biomal. The increase of calcium and phosphorus with biomal derive from bone and the calcium

  9. Molecular and Isotopic Records of Combustion Inputs to the Environment Over the Last 250 Years

    National Research Council Canada - National Science Library

    DeLima, Ana

    2004-01-01

    .... This study generated a high-resolution historical record of pyrogenic PAR emissions since pre-industrial times from anoxic aquatic sediments, allowing for detailed comparison with energy consumption data...

  10. Combustible gas production (methane) and biodegradation of solid and liquid mixtures of meat industry wastes

    Energy Technology Data Exchange (ETDEWEB)

    Marcos, A.; Al-Kassir, A.; Cuadros, F.; Lopez-Rodriguez, F. [School of Engineering, University of Extremadura, Avda. De Elva, s/n, 06071, Badajoz (Spain); Mohamad, A.A. [Department of Mechanical and Manufacturing Engineering, University of Calgary, 2500 University Dr. N.W., Calgary, Alberta (Canada)

    2010-05-15

    This work is devoted to determine the optimal operational conditions on the methane production as well as on the biodegradation obtained from the anaerobic codigestion of solid (fat, intestines, rumen, bowels, whiskers, etc.) and liquid (blood, washing water, manure, etc.) wastes of meat industry, particularly the ones rising from the municipal slaughterhouse of Badajoz (Spain). The experiments were performed using a 2 l capacity discontinuous digester at 38 C. The loading rate were 0.5, 1, 2, 3, and 4.5 g COD for wastewater (washing water and blood; Mixture 1), and 0.5, 1, 2, 3, and 4 g COD for the co-digestion of a mixture of 97% liquid effluent and 3% solid wastes v/v (Mixture 2) which represents the annual mean composition of the waste generated by the slaughterhouse. The maximal biodegradation rates obtained were: Mixture 1, 56.9% for a COD load of 1 g; and Mixture 2, 19.1% for a COD load of 2 g. For both mixtures, the greatest methane production was for the maximum COD load (4.5 g for Mixture 1, and 4 g for Mixture 2), at which values the amounts of methane obtained during and at the end of the co-digestion were practically indistinguishable between the two mixtures. The results will be used to design, construct, and establish the optimal operating conditions of a continuous complete-mixture biodigester. (author)

  11. Sustainable Production of Bio-Combustibles from Pyrolysis of Agro-Industrial Wastes

    Directory of Open Access Journals (Sweden)

    Maurizio Volpe

    2014-11-01

    Full Text Available Evaluation of the sustainability of biomass pyrolysis requires a thorough assessment of the product yields and energy densities. With this purpose, a laboratory scale fixed bed reactor (FBR was adapted from the standard Gray-King (GK assay test on coal to conduct fixed bed pyrolysis experiments on agricultural and agro-industrial by-products. The present study provides results on the pyrolysis of two types of biomass: chipped olive tree trimmings (OT and olive pomace (OP. Solid (char and liquid (tar product yields are reported. Mass yields are determined and compared with values obtained in similar works. Results indicate that char yield decreases from 49% (OT-db and 50% (OP-db at 325 °C to 26% (OT db and 30% (OP-db at 650 °C. Tar yield is almost constant (42% at different reaction temperatures for OT, while it decreases slightly from 42% to 35% for OP. Energy density of the products at different peak temperatures is almost constant for OT (1.2, but slightly increases for OP (from a value of 1.3 to a value of 1.4.

  12. Industrial Assessment of Creative Persons and Work Environments.

    Science.gov (United States)

    Lifton, Peter D.

    While personality psychology has a definite contribution to make to the study of industrial psychology and organizational behavior, it is a contribution with parameters, limitations, and areas of expertise which need to be better defined. Many industrial/organizational (I/O) psychologists are skeptical of the utility of personality measures for…

  13. Intensification of combustion in wood product industry; Huonekaluteollisuuden laemmityskattiloiden polton tehostaminen

    Energy Technology Data Exchange (ETDEWEB)

    Larjava, K; Siltanen, T [VTT Chemical Technology, Espoo (Finland); Metsae, A [Suomen Puututkimus Oy, Espoo (Finland); Tormonen, K [VTT Chemical Technology, Espoo (Finland); Kolsi, A; Orjala, M [VTT Energy, Jyvaeskylae (Finland); Muurinen, M [Enemi Oy, Lahti (Finland)

    1996-12-31

    The study involved optimization of the burning process in furniture industry boilers and reduction of noxious emissions by simple remedies and adjustments. This was realized in four boilers whose initial concentration of carbon monoxide (CO) in the flue gas was 1500-2000 ppm. In addition some other similar boilers were measured and tuned. As a result, emissions due to incomplete burning diminished. The concentration of carbon monoxide in flue gas during the turning off phase was in the range 3 000 - 30 000 ppm in the on/off controlled boilers. It was observed that the CO-level in the flue gas correlated with the amount of fuel left on the grate at the end of each full output sequence. The emissions during the turning-off phase could not be reduced. Grate and control equipment showed defects and malfunction originating from negligence of maintenance and lack of proper operating instructions. The emissions from maintained boilers were reduced by adjusting the fuel stream and the primary and secondary air flows, with brickwork in the furnace over the grate and by insulating the secondary burning chamber. The flow adjustments were carried out on the basis of flue gas analysis. Mounting a catalyst into the convection part of one tested boiler reduced the CO concentration in of flue gas from the initial value 500 ppm to 300 ppm. However the tested catalyst was poisoned by pollutants in the wood chips. In addition to improving the burning phase, the total emissions of one boiler were minimised by removing the turning off phase completely and changing the burning to a continuous process. This required that the boiler automation was renewed and new automation equipment

  14. Intensification of combustion in wood product industry; Huonekaluteollisuuden laemmityskattiloiden polton tehostaminen

    Energy Technology Data Exchange (ETDEWEB)

    Larjava, K.; Siltanen, T. [VTT Chemical Technology, Espoo (Finland); Metsae, A. [Suomen Puututkimus Oy, Espoo (Finland); Tormonen, K. [VTT Chemical Technology, Espoo (Finland); Kolsi, A.; Orjala, M. [VTT Energy, Jyvaeskylae (Finland); Muurinen, M. [Enemi Oy, Lahti (Finland)

    1995-12-31

    The study involved optimization of the burning process in furniture industry boilers and reduction of noxious emissions by simple remedies and adjustments. This was realized in four boilers whose initial concentration of carbon monoxide (CO) in the flue gas was 1500-2000 ppm. In addition some other similar boilers were measured and tuned. As a result, emissions due to incomplete burning diminished. The concentration of carbon monoxide in flue gas during the turning off phase was in the range 3 000 - 30 000 ppm in the on/off controlled boilers. It was observed that the CO-level in the flue gas correlated with the amount of fuel left on the grate at the end of each full output sequence. The emissions during the turning-off phase could not be reduced. Grate and control equipment showed defects and malfunction originating from negligence of maintenance and lack of proper operating instructions. The emissions from maintained boilers were reduced by adjusting the fuel stream and the primary and secondary air flows, with brickwork in the furnace over the grate and by insulating the secondary burning chamber. The flow adjustments were carried out on the basis of flue gas analysis. Mounting a catalyst into the convection part of one tested boiler reduced the CO concentration in of flue gas from the initial value 500 ppm to 300 ppm. However the tested catalyst was poisoned by pollutants in the wood chips. In addition to improving the burning phase, the total emissions of one boiler were minimised by removing the turning off phase completely and changing the burning to a continuous process. This required that the boiler automation was renewed and new automation equipment

  15. Combustion and environment. The answers from the energy and equipment suppliers; Combustion et environnement. Les reponses des fournisseurs d`energie et d`equipements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This paper is a reprint of an article published in `Energie Plus` magazine which questions the capability of commercial fuels and combustion equipments (central heating plants, burners, turbines and engines) available today of respecting the limit values of pollutant emissions (SO{sub x}, NO{sub x}, CO, dusts) of forthcoming regulations. An analysis of the situation is given separately for the fuels (natural gas, coal, heavy fuels) with a stress on the competition aspects, and for the combustion systems (turbines, diesel and gas engines, central heating plants). (J.S.)

  16. Sustainable development of the wind power industry in a complex environment: a flexibility study

    International Nuclear Information System (INIS)

    Zhao, Zhen-Yu; Zhu, Jiang; Zuo, Jian

    2014-01-01

    As a new and developing green energy business in emerging economies such as China, the wind power industry chain faces some complex issues that are further compounded by turbulent internal and external environments. To deal with the complex environment, the wind power industry needs to improve its level of flexibility so that it can become more adaptable to the changing environment. Hence it is important to explore the dynamics of the wind power industry chain flexibility with respect to the ever changing environment. This study uses questionnaire surveys and expert interviews to identify the influential flexibility components of the wind power industry chain. Subsequently a fuzzy cognitive mapping (FCM) methodology was used to establish a flexibility operating mechanism model. The research found that special attention should be paid to competition flexibility, technology flexibility, and intellectual property and talent flexibility. Policies play a pivotal role in regulating the driving effects of these components of flexibility with the aim being long term sustainability of a healthy level of overall flexibility of the wind power industry chain. This should in turn facilitate the sustainable development of the industry. - Highlights: • Wind power industry shall improve flexibility to deal with complex environment. • Critical components of flexibility of wind power industry chain were identified. • An operating mechanism model for flexibility of wind power industry is proposed. • Fuzzy cognitive mapping method is employed to model the dynamics of flexibility. • Policies play a pivotal role in fostering an industry environment toward flexibility

  17. Change and Innovation Leadership in an Industrial Digital Environment

    Directory of Open Access Journals (Sweden)

    Steude Dietrich H.

    2017-12-01

    Full Text Available With the high pace of digital innovation processes the risk of digital disruption increases for industrial companies. However, the progress in industrial digitalization accelerates the decision processes and relieves management from routine work. It gives room for creative management challenges like change and innovation processes. Team-oriented methods like Design Thinking are becoming a crucial part of the innovation culture. Industrial leadership must find current ways that are linked to creativity and to a coordinated human interaction. The article ties together the relevant literature and innovative ideas of digital tools, agile methodology and consequences for a flexible organizational structure.

  18. Research activities of Samsung Heavy Industries in the conservation of the environment

    International Nuclear Information System (INIS)

    Han, B.; Kim, D.K.; Pikaev, A.K.

    1998-01-01

    Research activities for accelerator fields at Samsung Heavy Industries could be categorized into the accelerator development and its industrial applications. As the initial step of the efforts, high voltage industrial electron accelerators are developed, and development of synchrotron light source and other accelerators are also investigated. The research activities for the applications of accelerator include wastewater treatment, combustion flue gas purification, semiconductor treatment, and other radio-chemical processing. For wastewater treatment, an electron beam pilot plant for treating 1,000m 3 /day of wastewater from 60,000m 3 /day of total dyeing wastewater is under construction in Taegu Dyeing Industrial Complex. A commercial plant for re-circulation of wastewater from papermill company is also under construction in S-paper Co. in Cheongwon city, and after the successful installation, up to 80% of wastewater could be re-used in paper producing process

  19. Wireless sensors in industrial time-critical environments

    CERN Document Server

    Cecilio, José

    2013-01-01

    This book introduces the components, operations, industry protocols and standards of distributed control system (DCS), and shows how to include wireless technology in their design while guaranteeing the desired operation characteristics.

  20. The competitive environment of the North American energy marketing industry

    International Nuclear Information System (INIS)

    Tonkin, S.L.

    1999-01-01

    Various issues regarding U.S. wholesale energy marketing were discussed with particular emphasis on how energy marketing is changing industries in North America. In 1998, the energy industry reported a growth in revenue of 26 per cent despite declining natural gas prices. It was emphasized that several major competitive issues need to be addressed by industry competitors in order to operate in this unpredictable market. These issues include profitability, market volatility and mergers and acquisitions. This paper presented a list of the top 10 North American Energy marketers in 1998. Although the number of marketers in the energy sector continues to grow, it is expected that the numbers will decline significantly within three years. This will be due mostly to the continuation of major mergers and acquisitions. It was concluded that in general, energy marketing may become an even more attractive industry because of increasing operating margins. 5 tabs., 2 figs

  1. The Australian uranium industry in the post-Fukushima environment

    International Nuclear Information System (INIS)

    Angwin, Michael

    2011-01-01

    Evolving events and trends overseas are shaping the immediate and longer term direction of the Australian uranium industry. As an entirely export-oriented sector, the broad economic and commercial conditions to which the industry responds are set outside our country. Governments in Australia set policy and implement regulations which determine how easily, or otherwise, uranium companies here can respond to overseas drivers of demand for their product. Since mid - March the unfolding events at the Fukushima Daiichi nuclear power plant in Japan have been preoccupying many of those who run and observe the uranium industry. This article discusses whether the emergency at Fukushima has stopped the expansion of the nuclear energy industry and will it send the sector into decline, as a number of anti-nuclear activists are hoping?

  2. The analysis of results received from the programme for calculating the concentration of pollutants from vehicles with internal combustion engines on the crossroads in urban environments

    International Nuclear Information System (INIS)

    Tashevski, Done; Dimitrovski, Mile

    1995-01-01

    The analysis of results and influence of specified factors on the concentration of pollutants on the crossroads with chosen characteristic conditions has been made, on the basis of the programme for calculating the concentration of pollutants from vehicles with internal combustion engines on the crossroads in urban environments. (author)

  3. Environment control in selected industrial regions of Austria

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.; Kutschera, U.

    2004-01-01

    The environmental situation (air, water and soil) of fourteen Austrian regions (Arnoldstein-Gailitz, Brixlegg, Brueckl, Lend, Linz, Lenzing, Donawitz, Schwechat, Tanklager Lobau, Treibach-Althofen, Hallein, Poels, Ranshofen and St. Poelten) with industrial activities based on available data (1994-2002) is described. The connection and the temporal development of the emissions from industrial plants, the immissions and the environmental exposure as far as possible are shown, as well as actual information deficits and possible needs for action are worked out. For each region the following information is provided: location, description of present industrial plants, emissions (air, waste water and waste water treatment), wastes and residues, deposits of toxic waste, water immissions, air immissions and soil-vegetation-bioindication. (nevyjel)

  4. Atmospheric fluidized bed combustion advanced system concepts applicable to small industrial and commercial markets. Topical report, Level 2

    Energy Technology Data Exchange (ETDEWEB)

    Ake, T.R.; Dixit, V.B.; Mongeon, R.K.

    1992-09-01

    As part of an overall strategy to promote FBC coal combustion and to improve the marketability of the eastern coals, the US Department of Energy`s Morgantown Energy Research Center awarded a three level contract to Riley Stoker Corporation to develop advanced Multi Solids Fluidized Bed (MSFB) boiler designs. The first level of this contract targeted the small package boiler (10,000--50,000 lb/hr steam) and industrial size boiler (75,000--150,000 lb/hr steam) markets. Two representative sizes, 30,000 lb/hr and 110,000 lb/hr of steam, were selected for the two categories for a detailed technical and economic evaluation. Technically, both the designs showed promise, however, the advanced industrial design was favored on economic considerations. It was thus selected for further study in the second level of the contract. Results of this Level-2 effort, presented in this report, consisted of testing the design concept in Riley`s 4.4 MBtu/hr pilot MSFB facility located at Riley Research Center in Worcester, Mass. The design and economics of the proof of concept facility developed in Level-1 of the contract were then revised in accordance with the findings of the pilot test program. A host site for commercial demonstration in Level-3 of the contract was also secured. It was determined that co-firing coal in combination with paper de-inking sludge will broaden the applicability of the design beyond conventional markets. International Paper (IP), the largest paper company in the world, is willing to participate in this part of the program. IP has offered its Hammermill operation at Lockhaven, Pa, site of a future paper de-inking plant, for the proof of concept installation. This plant will go in operation in 1994. It is recommended that METC proceed to the commercial demonstration of the design developed. The approach necessary to satisfy the needs of the customer while meeting the objectives of this program is presented along with a recommended plan of action.

  5. Experimental study of reduce of nitrogen oxides emission in the Environment at the Ekibastuz coal combustion

    International Nuclear Information System (INIS)

    Korabejnikova, V.K.

    2004-01-01

    For revealing conditions decrease in emissions of nitrogen oxide in an environment at three-stage burning of coal dust Ekibastuz coal with use two-line burners (on were the experimental research of test on fiery the stand as a result of which acknowledgement of theoretical results is received. (author)

  6. Combustion stability and thermal efficiency in a porous media burner for LPG cooking in the food industry using Al_2O_3 particles coming from grinding wastes

    International Nuclear Information System (INIS)

    Herrera, Bernardo; Cacua, Karen; Olmos-Villalba, Luis

    2015-01-01

    Cooking is one of the most thermal-energy consuming processes in the food industry and development of devices that contribute to decrease the consumption of fossil fuel is a matter of great importance. This decreasing in consumption can both enlarge competitiveness in the enterprises of this sector and reduce emissions of greenhouse gases and other toxic combustion by products such as, carbon monoxide and nitrogen oxides. A porous burner made of a bed of Al_2O_3 particles coming from grinding residues and combined with ceramic foam of SiSiC has been evaluated respect to Liquefied Petroleum Gas combustion stability and thermal efficiency for cooking in food industry. The results showed that for specific heat input rate lower than 154 kW/m"2, the upper and lower equivalence ratio on the stability limit follow approximately a linear trend, as well as the wide of the range of stability remains constant. But this trend is broken when higher heat input rate is applied. Also, every equivalence ratio for stable combustion was in the lean ratio and stoichiometric combustion values were not feasible because flashback occurred. Emissions of CO were in acceptable values lower than 25 ppm for specific heat input rate lower than 154 kW/m"2 but an important rising in the CO emissions could be seen when the burner worked at higher heat input rate due to a moderate lift-off and quenching on the surface of the burner. Thermal efficiency was calculated in two different working ways: the “radiation–convection” and “conduction”. Thermal efficiency in the “radiation–convection” was between 15.7% and 23.6%, which are lower than the average thermal efficiency of the conventional free-flame burner. But the “conduction” mode showed a significant advantage respect to free flame conventional burners, since it could improve the thermal efficiency between 7% and 14%. The improvement in efficiency and the possibility of interrupting the flow of fuel in a cyclical operation

  7. Impact of sugar industry fly ash emissions on environment

    International Nuclear Information System (INIS)

    Memom, A.R.; Ansari, A.K.

    2001-01-01

    This work was conducted in 1992 to find out the effects and causes of environmental problems due to sugar mills of Sindh. Most of the complaints were received from Nawabshah, Tando Mohammed Khan residential areas where following mills are located, emitting large amounts of fly ash from their chimneys into the atmosphere: (i) Habib Sugar Mills, Nawabshah, (II) Fauji Sugar Mills, Tando Mohammed Khan. Environmental survey of above localities was carried out which reveals that eye-allergy and asthma are the major health effects of fly ash besides the aesthetic problems. Sieve analysis of two fly ash samples viz Fauji Sugar Mills (Old Plant) and Sanghar Sugar Mills (New Plant) showed that the particle size of over 50% of fly ash was above 300 mu m. These large size black particles were unburned carbon particles, which on burning in air gave a weight loss of over 87% at 1000 centi grade. The fly ash analytical results showed that combustion of bagasse in sugar mills was not complete at all and this was not only polluting the atmosphere but also causing energy losses. (author)

  8. Applying the behaviour grid for improving safety in industrial environments

    NARCIS (Netherlands)

    Boer, de J. (Johannes); Heylen, D. (Dirk); Teeuw, W.B. (Wouter)

    2013-01-01

    The Saxion University of Applied Sciences recently started its “Safety at Work” project. Its objective is to increase safety in the workplace by combining and applying state-of-the-art factors from Ambient Intelligence, Industrial & Product Design and Smart Materials [1].The human

  9. SAFARI: An Environment for Creating Tutoring Systems in Industrial Training.

    Science.gov (United States)

    Gecsei, J.; Frasson, C.

    Safari is a cooperative project involving four Quebec universities, two industrial partners (Virtual Prototypes, Inc., providing the VAPS software package, and Novasys, Inc., a consulting firm specializing in artificial intelligence and training), and government. VAPS (Virtual Applications Prototyping System) is a commercial interface-building and…

  10. THREE DIMENSIONAL PRINTING IN THE SOUTH AFRICAN INDUSTRIAL ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    D. Dimitrov

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: The current development of the rapid prototyping industry in South Africa is characterised by the strong dominance and fast growth in sales of three dimensional printers. Although it reflects the international trend, it seems that the industrial community lacks a clear appreciation of the real strength of this technology, especially with respect to the large variety of devices available today on the market. This paper surveys the current state and capabilities of three dimensional printing (3DP. Based on its technical background – the ink-jet printing known from the printer and plotter industry – a classification structure is developed and proposed. Different printing techniques and process concepts, together with their advantages and limitations, are described and analysed. Typical examples from three completely different application areas – manufacturing, medicine, and architecture – are presented and discussed. Some basic considerations for an informed selection of the right technology for a particular application are then presented.

    AFRIKAANSE OPSOMMING: Sterk groei in die verkope van drie dimensionele drukkers (3DP kenmerk die onlangse groei in die snelle prototipe industrie in Suid-Afrika. Ten spyte daarvan dat hierdie ‘n internasionale tendens reflekteer, blyk dit dat die werklike waarde van die tegnologie nog nie ten volle waardeer word in die industriële gemeenskap nie, veral aangesien daar so ‘n groot verskeidenheid masjiene in die mark beskikbaar is. ‘n Oorsig oor die huidige stand en vermoë van drie dimensionele drukkers word hier gegee. ‘n Klassifikasiestruktuur – gebaseer op die inkspuitdrukkertegnologie – word ontwikkel en voorgestel. Verskillende druktegnieke en konsepprosesse word ontleed. Daar word ook gekyk na die voor- en nadele hiervan. Tipiese voorbeelde van drie verskillende toepassings (vervaardiging, medies, en argitektuur word aangebied en bespreek. Basiese riglyne vir

  11. Virtual Load Machine as Test Environment for Industrial Storage Applications

    OpenAIRE

    Schaab , Darian ,; Zimmermann , Fabian; Weckmann , Sebastian; Sauer , Alexander

    2017-01-01

    Part 3: Cyber-Physical (IIoT) Technology Deployments in Smart Manufacturing Systems; International audience; The market share of renewable energy is rising all over the world and leads to a more and more volatile energy supply. The challenge of keeping supply and demand constantly balanced is getting more complex and dynamic. Large scale energy consumers like industrial facilities need to take on an active role in the energy system and adapt their energy consumption to the energy availability...

  12. Radiochemical studies on some industrial pollutants released to the environment

    International Nuclear Information System (INIS)

    Metwally, E.M.Abel-Ghany

    1997-01-01

    This work aims at characterizing the industrial pollutants that may be released from: Abu-Zaabal fertilizer company, arab ceramic industry, Egyptian alum company near the compass of Atomic Energy Authority (AEA) in Inshas and petroleum pipelines company at the start of lsmailia canal. The work concentrates on soil or/and sediment pollution, the lsmailia canal water stream pollution and plant pollution. Type of the element and its content are major parameters that are traced in the traced in the experimental work. The work stresses on the analysis of the raw materials used in the chosen Factories, their products of current use as well as their wastes and drainage. Instrumental neutron activation analysis (INAA) technique and radiometric determination of elements are adopted through this work. The selection of the technique is based on less time consumption, high accuracy, reliability, selectivity as well as chemical processing and separation need not to applied. Together with INAA determination of natural radioactivity are also adopted for accessing certain specific elements of importance to the fertilizer industry. Beside the mentioned techniques several classical analytical techniques as atomic absorption, spectrophotometric determination and volumetric methods are handled. 25 tabs., 80 figs., 117 refs

  13. NOx emissions and thermal efficiencies of small scale biomass-fuelled combustion plant with reference to process industries in a developing country

    International Nuclear Information System (INIS)

    Tariq, A.S.; Purvis, M.R.I.

    1996-01-01

    Solid biomass materials are an important industrial fuel in many developing countries and also show good potential for usage in Europe within a future mix of renewable energy resources. The sustainable use of wood fuels for combustion relies on operation of plant with acceptable thermal efficiency. There is a clear link between plant efficiency and environmental impacts due to air pollution and deforestation. To supplement a somewhat sparse literature on thermal efficiencies and nitrogen oxide emissions from biomass-fuelled plants in developing countries, this paper presents results for tests carried out on 14 combustion units obtained during field trials in Sri Lanka. The plants tested comprised steam boilers and process air heaters. Biomass fuels included: rubber-wood, fuelwood from natural forests; coconut shells; rice husks; and sugar can bagasse. Average NO x (NO and NO 2 ) emissions for the plants were found to be 47 gNO 2 GJ -1 with 18% conversion of fuel nitrogen. The former value is the range of NO x emission values quoted for combustion of coal in grate-fired systems; some oil-fired systems and systems operating on natural gas, but is less than the emission levels for the combustion of pulverized fuel and heavy fuel oil. This value is significantly within current European standards for NO x emission from large combustion plants. Average thermal efficiency of the plants was found to be 50%. Observations made on operational practices demonstrated that there is considerable scope for the improvement of this thermal efficiency value by plant supervisor training, drying of fuelwood and the use of simple instruments for monitoring plant performance. (Author)

  14. Mobile Sensor Networks for Inspection Tasks in Harsh Industrial Environments

    NARCIS (Netherlands)

    Mulder, Jacob; Wang, Xinyu; Ferwerda, Franke; Cao, Ming

    Recent advances in sensor technology have enabled the fast development of mobile sensor networks operating in various unknown and sometimes hazardous environments. In this paper, we introduce one integrative approach to design, analyze and test distributed control algorithms to coordinate a network

  15. Application of Nuclear Techniques in Industry and the Environment

    International Nuclear Information System (INIS)

    Masinza, A.S.

    2015-01-01

    Major radiotracer techniques are now in routine service industry to optimize processes, solve problems improve product quality, save energy and reduction pollution. The benefit to cost ratios of radiotracers, sealed sources and nucleonic gauges applications are considerably high; between 10:1 and 4000:1. The number of services for troubleshooting carried out worldwide per year is in excess of tens of thousands (out of them greater than 5000 are gamma scans). The number of nucleonic gauges worldwide could be estimated to be greater that 250,000 (Author)

  16. An industry-wide commitment to the environment

    International Nuclear Information System (INIS)

    Salo, L.

    1992-01-01

    As part of its ongoing effort to further enhance its environmental, health, and safety effort. Neste committed itself to the international chemical industry's Responsible Care programme last year. Neste's involvement with the programme will supplement the Corporation's internal environmental and safety operating principles Neste's Responsible Care work is based around a set of 10 guiding principles set out by the European Chemical Industry Federation (CEFIC). In addition to corporate-level targets, divisions and units have drawn up more detailed and specific coals for their own operations. Neste Chemicals' production plants, for example have developed action plans covering the next 3-5 years. A network of divisional RC coordinators and unit or site-specific RC contact personnel has also been established Progress will be measured by indicators covering areas such as emission levels, energy use, amount of recycled waste, noise, and training Concrete benefits have already been achieved thanks simply to the start of the systematic measurement and collation of RC-related information

  17. Radioisotope applications in industry and environment: Indian scenario

    International Nuclear Information System (INIS)

    Pant, H.J.

    2016-01-01

    Applications of radioisotopes and radiation technology in industry, medicine and agriculture form an important part of India's programme of using nuclear technology for societal benefits. Radioisotope production in India started on a modest scale soon after 1 MW APSARA reactor at Trombay, Mumbai became critical in 1956. The scope of activities expanded thereafter. With the commissioning of 40 MW CIRUS reactor in 1960, the setting up of modern radioisotope processing laboratories in late sixties and the production of cobalt-60 in power reactors in megacurie quantities in late seventies made India self-sufficient in radioisotope production. The radioisotope production received a major boost in 1985 with the commissioning of high flux 100 MW DHRUVA reactor, which provided opportunity to extend the range of radioisotopes available in the country both in quantity as well in specific activity. The CIRUS reactor has been shutdown in year 2010 and 1 MW APSARA reactor is presently being upgraded to 5 MW. Today, The DHRUVA reactor operating at its full capacity is being used for production of 100 different radioisotopes those are used in industry, agriculture and medicine. (author)

  18. THE IMPACT OF INDUSTRIAL WASTE LANDFILL ON THE ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Monika Janas

    2017-06-01

    Full Text Available The aim of the study is to assess the environmental impact of a shut down industrial waste landfill. A detailed analysis of the quality of groundwater around the landfill in the years 1995-2016 was conducted. Assessment of the status of groundwater in the landfill area was made based on the results of monitoring tests. It includes the measurement of pH, specific electrical conductivity (SEC and the content of chlorides, sulfates, phosphates, heavy metals: copper (Cu, lead (Pb, chromium (Cr and a number of other pollution indicators. The analysis confirms that the landfill during the operation did not constitute a threat because of a number of employed security measures and sealing layers. Only in recent years, the industrial waste landfill which is already out of operation has become an extremely serious environmental threat. The results of water analyses from the piezometers clearly indicate that there is a problem of groundwater contamination. There was a significant increase in the value of some of the analyzed indicators (such as chlorides and sulfates, mainly in the piezometers located on the flow line of groundwater in the landfill area. The observed situation is probably a result of damage to the sealing layers and leaching of pollutants from waste deposited in the landfill by rain water.

  19. Power Industry Reliability Coordination in Asia in a Market Environment

    OpenAIRE

    Hammons, Thomas J.; Voropai, Nikolai I.

    2010-01-01

    This paper addresses the problems of power supply reliability in a market environment. The specific features of economic interrelations between the power supply organization and consumers in terms of reliability assurance are examined and the principles of providing power supply reliability are formulated. The economic mechanisms of coordinating the interests of power supply organization and consumers to provide power supply reliability are discussed. Reliability of restructuring China's powe...

  20. Modular Sensor Environment : Audio Visual Industry Monitoring Applications

    OpenAIRE

    Guillot, Calvin

    2017-01-01

    This work was made for Electro Waves Oy. The company specializes in Audio-visual services and interactive systems. The purpose of this work is to design and implement a modular sensor environment for the company, which will be used for developing automated systems. This thesis begins with an introduction to sensor systems and their different topologies. It is followed by an introduction to the technologies used in this project. The system is divided in three parts. The client, tha...

  1. Use of ozone for sustainable brackishwater industrial aquaculture and management of environment

    Digital Repository Service at National Institute of Oceanography (India)

    Dwivedi, S.N.

    The use of ozones for sustainable brakish water industrial aquaculture and the management of the environment is discussed. In sample survey conducted in the farms, it was seen that oxygen level was not adequate for high production. Replacement...

  2. Combustion of paper industry sewage sludge in existing boilers. Progress report 1; Tillfoersel av skogsindustriellt slam till eldstaeder. Delrapport etapp 1

    Energy Technology Data Exchange (ETDEWEB)

    Hoeglund, Christer; Lundborg, Rickard; Myringer, Aase

    2003-10-01

    The aim of this project is to find a feasible method for combustion of sewage sludge in existing boilers of the paper industry. Biological sludge is complicated to handle since it contains a lot of bound water. Problems arise at dehydration and subsequent treatment. Moreover, the trend is that the amount of biological sludge increases whereas the amount of easily dehydrated fibre sludge decreases. Today, mixed sludge is combusted at more then half of the paper and pulp mills in Sweden. In order to evaluate the existing problems and the characteristics of different sludge, five mills have been studied. Sludge from three of these mills has also been analysed with regards to content and combustion properties. The content of sludge from different mills varies greatly. If the ash content is high, some substances, especially the alkali metals can cause problems at combustion such as sintering and deposits in the boiler. The analysed sludge did not contain important amounts of substances that causes problems at combustion, nor any toxic substances, except from one mill that had relatively high content of mercury. The combustion tests proved that combustion and especially drying of sludge is made preferably when the sludge particles are small, on as big an area as possible. One feasible method to combust sludge from the forest industry is to dehydrate so called fibre sludge to the same dry substance content as bark, in order to introduce it with existing fuel feeding devises and combust it together with the other fuel on the grate in a grate boiler. Dehydrated biological sludge, with considerably higher moisture content than pure fibre sludge, is added with a burner devise above the bed. The sludge particles are dried (in the furnace) and combusted before they leave the furnace. In this way, wet sludge that plug the bed is avoided. The location of the sludge feeding device in the boiler is important and should be adjusted individually to each furnace. Simulations show that

  3. New lidar challenges for gas hazard management in industrial environments

    Science.gov (United States)

    Cézard, Nicolas; Liméry, Anasthase; Bertrand, Johan; Le Méhauté, Simon; Benoit, Philippe; Fleury, Didier; Goular, Didier; Planchat, Christophe; Valla, Matthieu; Augère, Béatrice; Dolfi-Bouteyre, Agnès.

    2017-10-01

    The capability of Lidars to perform range-resolved gas profiles makes them an appealing choice for many applications. In order to address new remote sensing challenges, arising from industrial contexts, Onera currently develops two lidar systems, one Raman and one DIAL. On the Raman side, a high spatial-resolution multi-channel Raman Lidar is developed in partnership with the French National Radioactive Waste Management Agency (Andra). This development aims at enabling future monitoring of hydrogen gas and water vapor profiles inside disposal cells containing radioactive wastes. We report on the development and first tests of a three-channel Raman Lidar (H2, H2O, N2) designed to address this issue. Simultaneous hydrogen and water vapor profiles have been successfully performed along a 5m-long gas cell with 1m resolution at a distance of 85 m. On the DIAL side, a new instrumental concept is being explored and developed in partnership with Total E and P. The objective is to perform methane plume monitoring and flux assessment in the vicinity of industrials plants or platforms. For flux assessment, both gas concentration and air speed must be profiled by lidar. Therefore, we started developing a bi-function, all-fiber, coherent DIAL/Doppler Lidar. The first challenge was to design and build an appropriate fiber laser source. The achieved demonstrator delivers 200 W peak power, polarized, spectrally narrow (<15 MHz), 110 ns pulses of light out of a monomode fiber at 1645 nm. It fulfills the requirements for a future implementation in a bi-function Dial/Doppler lidar with km-range expectation. We report on the laser and lidar architecture, and on first lidar tests at 1645 nm.

  4. Radiation Impact to Environment of Non-nuclear Industry in Hunan,Hubei and Jiangxi Provinces

    Institute of Scientific and Technical Information of China (English)

    SONG; Wei-jie; CHENG; Wei-ya

    2015-01-01

    According to the gas,liquid effluent monitoring and survey results of non nuclear industry in Hunan,Hubei and Jiangxi provinces,the radiation effects of which on the surrounding environment were analysis and evaluation.Evaluation industrials includes three coal-fired power plants,two rare earth ores,two cement factories,one

  5. Tubular combustion

    CERN Document Server

    Ishizuka, Satoru

    2014-01-01

    Tubular combustors are cylindrical tubes where flame ignition and propagation occur in a spatially confined, highly controlled environment, in a nearly flat, elongated geometry. This allows for some unique advantages where extremely even heat dispersion is required over a large surface while still maintaining fuel efficiency. Tubular combustors also allow for easy flexibility in type of fuel source, allowing for quick changeover to meet various needs and changing fuel pricing. This new addition to the MP sustainable energy series will provide the most up-to-date research on tubular combustion--some of it only now coming out of private proprietary protection. Plentiful examples of current applications along with a good explanation of background theory will offer readers an invaluable guide on this promising energy technology. Highlights include: * An introduction to the theory of tubular flames * The "how to" of maintaining stability of tubular flames through continuous combustion * Examples of both small-scal...

  6. Research on technology environment improvement of related industries based on internet governance

    Science.gov (United States)

    Zhang, Jing; Guan, Zhongliang

    2017-08-01

    The technology of Internet is an important factor of industry’s development. Constructing a good technical environment is the foundation of the Internet and related industries’ development. This paper demonstrates the necessity of the construction and improvement of the Internet and the related industries technology environment through comparing the current situation of the related industries. It also points out that China needs to improve the environment of the Internet technology urgently. The paper establishes the technology demand pattern of different related industries, and explores strategies of the different Internet technology environment’s construction and perfection according to the different demand of the strong related Internet and the weak related Internet to the industries environment. This paper analyzes the factors that threaten the security of the Internet, and fully demonstrates the methods and tactics of establishing and improving the technology environment Internet hardware, the Internet and related industries in China under the basis of the framework of comprehensive management of Internet. This paper also studies the construction and improvement of the comprehensive management technology environment based on the Internet industry in China.

  7. Pyrolysis of biomass in a semi-industrial scale reactor: Study of the fuel-nitrogen oxidation during combustion of volatiles

    International Nuclear Information System (INIS)

    Mura, E.; Debono, O.; Villot, A.; Paviet, F.

    2013-01-01

    In this work, an experimental study of the NOx-fuel formation, carried out on a semi-industrial scale reactor during combustion of volatiles of the pyrolysis, is performed. Two different biomasses with different nitrogen contents such as a mixture of organic sludge and wood were tested. Results show that the temperature of pyrolysis does not obviously affect the production of NOx-fuel because of the most active precursors (NH 3 and HCN) are already released at low temperatures (400 °C). In the case of sludge mixture, the combustion conditions play the discriminating role in the production of NOx-fuel: the higher the excess air ratio the larger the production of nitrogen oxides from N-fuel. -- Highlights: • An experimental study of the pyrolysis of biomass from waste has been carried out. • The study consists in the analysis of NOx-fuel production during combustion. • The temperature of pyrolysis does not affect the production of NOx. • Only a small part of the N-fuel released in the volatile fraction is oxidized. • In the case of sewage sludge the excess air ratio affects the NOx production

  8. Experimental and numerical investigations of the dry-low-NOx hydrogen micromix combustion chamber of an industrial gas turbine

    Directory of Open Access Journals (Sweden)

    A. Haj Ayed

    2015-09-01

    The study reveals great potential for the successful application of numerical flow simulation to predict flame structure and NOx emission level of micromix hydrogen combustion, help understanding the flow phenomena related with the micromixing, reaction zone and NOx formation and support further optimization of the burner performance.

  9. Realtime Automation Networks in moVing industrial Environments

    Directory of Open Access Journals (Sweden)

    Rafael Leidinger

    2012-04-01

    Full Text Available The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT. For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conven-tional technologies of office automation are unsuitable and/or not manageable. The employment of mobile ser-vices in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solu-tions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and develop-ment of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network [1].

  10. Integrated design optimization research and development in an industrial environment

    Science.gov (United States)

    Kumar, V.; German, Marjorie D.; Lee, S.-J.

    1989-01-01

    An overview is given of a design optimization project that is in progress at the GE Research and Development Center for the past few years. The objective of this project is to develop a methodology and a software system for design automation and optimization of structural/mechanical components and systems. The effort focuses on research and development issues and also on optimization applications that can be related to real-life industrial design problems. The overall technical approach is based on integration of numerical optimization techniques, finite element methods, CAE and software engineering, and artificial intelligence/expert systems (AI/ES) concepts. The role of each of these engineering technologies in the development of a unified design methodology is illustrated. A software system DESIGN-OPT has been developed for both size and shape optimization of structural components subjected to static as well as dynamic loadings. By integrating this software with an automatic mesh generator, a geometric modeler and an attribute specification computer code, a software module SHAPE-OPT has been developed for shape optimization. Details of these software packages together with their applications to some 2- and 3-dimensional design problems are described.

  11. LITGS: a new technique for single shot temperature and fuel concentration measurements in turbulent combusting environments

    Energy Technology Data Exchange (ETDEWEB)

    Fantoni, Roberta; Giorgi, M. [ENEA, Centro Ricerche Frascati, Frascati, RM (Italy). Dipt. Innovazione; De Risi, A.; Laforgia, D. [Lecce Univ., Lecce (Italy). Dipt. di Ingegneria dell' Innovazione

    1999-07-01

    In the present study the possibility to apply time resolved Laser Induced Thermal Grating Spectroscopy (LITGS) to detect fuel concentration and temperature in mixtures and flames at atmospheric pressure or higher is investigated. The resonant IR single photon absorption of two short pulse pump beams is used to initially generate a population grating, decaying into a thermal grating due to relaxation processes in the gas mixture. The thermal grating evolution is followed by monitoring the scattered signal of a cw visible probe beam after the end of the pump pulse. The use of the IR optical transition of diesel fuel assured a high species selectivity and a negligible influence of the visible emission background due to the presence of electronically excited species in flames. Fuel concentration and temperature measurements in a pressurized cell, with pressure ranging between 0.1 an 1.5 MPa, and in a diffusion turbulent flame generated by a burner feed with diesel fuel operating at atmospheric pressure are presented. The experimental investigation shows that LITGS signal increase linearly with gas density. This characteristic makes LITGS a very interesting technique for fuel distribution and temperature measurements in hostile (high-pressure and turbulent flow) environments. Detection limit for diesel fuel at atmospheric pressure is found to be about 40 ppm and it decreases with the increase of the pressure. The low detection limit which can be reached makes this technique suitable also for monitoring minor species and radicals. [Italian] Nel presente studio si investiga la possibilita' di applicare la tecnica LITGS (Laser Induced Thermal Grating Spectroscopy) per misurare la concentrazione e la temperatura di carburante in miscele e fiamme a pressiona atmosferica o superiore. L'assorbimento risonante di un singolo fotone IR proveniente da uno dei due laser impulsati di pompa e' utilizzato per generare inizialmente un reticolo di popolazione, che decade

  12. The relation between external governance environment and over-investment: Evidence from industry regulation

    Directory of Open Access Journals (Sweden)

    Kejing Chen

    2014-11-01

    Full Text Available Based on the Law and Finance theory, and the regulatory capture theory, external governance environment and industrial regulations can exert a certain influence on corporate over-investment. On the basis of qualitative analysis of the relationship between external governance environment and corporate over-investment under different industrial regulation conditions, this paper, using data of non-financial companies listed in Shanghai and Shenzhen Stock Exchanges in the period 2001-2010, describes the regional distribution characteristics of over-investment of Chinese listed companies, and establishes an OLS regression model of the relationship between external governance environment and over-investment. The study respectively groups data from regulated and non-regulated industries as a sample and empirically tests the OLS regression model. Results show that: from the perspective of economic geography, there exists a local spatial cluster phenomenon in the distribution of over-investment of listed companies in regulated industries, while non-regulated industries conform to no regularity. In regulated industries, external governance environment factors (level of government intervention, rule of law and financial development may exert a significant negative influence on the degree of over-investment of listed companies, but on non-regulated industries, their effect is reversed. Also, government intervention, legal enforcement and financial development are positively correlated to over-investment. Further research indicates that, compared with government intervention and financial development, legal enforcement influences over-investment the most.

  13. EFFECTS OF HIGH ECONOMIC IMPORTANCE OF INDUSTRIAL BRANCHES ON HUMAN LIFE QUALITY AND ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Doguş Deniz Özarslan

    2012-01-01

    Full Text Available Importance of industrialization which has a role in determination of the civilization levels of societies is increasing everyday due to meet rapidly increasing demands. However this process has led up to environmental problems with time and thus effects on quality of human life also brought along. In this study, three sectors were selected among different branches of industry according to their economical importance in Turkey. These sectors are paper, metal and construction chemicals industry. Production processes of selected sectors were examined and effects of production stages on the environment and human health as well as their contribution to sustainable development were investigated. Well known Turkish companies from each industrial branch were evaluated in detail. These industrial sectors having economic importance are compared to each other according to their effects on quality of human life and environment and the results are evaluated accordingly.

  14. UST-IDRC national symposium on the mining industry and the environment: programme and abstracts

    International Nuclear Information System (INIS)

    1997-04-01

    The National Symposium on the mining industry and the environment was organized by the UST/IDRC Environmental Research Group in the Department of Chemistry of the University of Science and Technology, Kumasi, Ghana. The symposium generally covered strategies for the development of the mining industry as well as solutions to the environmental problems associated with the industry in Ghana. The publication contains the programme and abstracts of scientific sessions of the Symposium. The abstracts covered the following topics among others: multi-element analysis of mineral ores samples, review of environmental studies related to gold mining in Ghana, local sulphooxidizing bacteria for environmentally friendly gold mining, arsenic pollution in streams and sediments, rainfall erositivity and soil loss from degraded lands and mine spoils, the impact of surface mining on forest structure and environment, current environmental practices in the mining industry, and the role of the mining industry in the economy of Ghana

  15. Skylab experiments. Volume 3: Materials science. [Skylab experiments on metallurgy, crystal growth, semiconductors, and combustion physics in weightless environment for high school level education

    Science.gov (United States)

    1973-01-01

    The materials science and technology investigation conducted on the Skylab vehicle are discussed. The thirteen experiments that support these investigations have been planned to evaluate the effect of a weightless environment on melting and resolidification of a variety of metals and semiconductor crystals, and on combustion of solid flammable materials. A glossary of terms which define the space activities and a bibliography of related data are presented.

  16. Lidar Remote Sensing for Industry and Environment Monitoring

    Science.gov (United States)

    Singh, Upendra N. (Editor); Itabe, Toshikazu (Editor); Sugimoto, Nobuo (Editor)

    2000-01-01

    Contents include the following: 1. Keynote paper: Overview of lidar technology for industrial and environmental monitoring in Japan. 2. lidar technology I: NASA's future active remote sensing mission for earth science. Geometrical detector consideration s in laser sensing application (invited paper). 3. Lidar technology II: High-power femtosecond light strings as novel atmospheric probes (invited paper). Design of a compact high-sensitivity aerosol profiling lidar. 4. Lasers for lidars: High-energy 2 microns laser for multiple lidar applications. New submount requirement of conductively cooled laser diodes for lidar applications. 5. Tropospheric aerosols and clouds I: Lidar monitoring of clouds and aerosols at the facility for atmospheric remote sensing (invited paper). Measurement of asian dust by using multiwavelength lidar. Global monitoring of clouds and aerosols using a network of micropulse lidar systems. 6. Troposphere aerosols and clouds II: Scanning lidar measurements of marine aerosol fields at a coastal site in Hawaii. 7. Tropospheric aerosols and clouds III: Formation of ice cloud from asian dust particles in the upper troposphere. Atmospheric boundary layer observation by ground-based lidar at KMITL, Thailand (13 deg N, 100 deg. E). 8. Boundary layer, urban pollution: Studies of the spatial correlation between urban aerosols and local traffic congestion using a slant angle scanning on the research vessel Mirai. 9. Middle atmosphere: Lidar-observed arctic PSC's over Svalbard (invited paper). Sodium temperature lidar measurements of the mesopause region over Syowa Station. 10. Differential absorption lidar (dIAL) and DOAS: Airborne UV DIAL measurements of ozone and aerosols (invited paper). Measurement of water vapor, surface ozone, and ethylene using differential absorption lidar. 12. Space lidar I: Lightweight lidar telescopes for space applications (invited paper). Coherent lidar development for Doppler wind measurement from the International Space

  17. Industrial application of fluidized bed combustion. Phase I, task 4: sub-scale unit testing and data analysis. Volume I. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Goodstine, S.L.; Accortt, J.I.; Harris, R.D.; Kantersaria, P.P.; Matthews, F.T.; Jones, B.C.; Jukkola, G.D.

    1979-12-01

    Combustion Engineering, under contract with the Department of Energy, has developed, designed, and is constructing a 50,000 lbs steam/hr Industrial FBC Demonstration Plant. The plant will provide steam for space heating at the Great Lakes Naval Base in North Chicago, Illinois. Its operation will enable industry to objectively appraise the performance, reliability, and economics of FBC technology. A hot sub-scale unit (SSU), simulating the operating conditions of the demonstration plant, has been constructed and operated at Combustion Engineering's Kreisinger Development Laboratory in Windsor, Connecticut. The SSU facility has served as a valuable developmental tool in establishing the performance characteristics of the FBC process and equipment as used in the larger Demonstration Plant. Experience gained during more than 2000 hours of operation, including the analytical results derived from an extensive test program of 1500 hours operation, has defined problems and identified solutions in engineering the larger FBC Demonstration Plant. This report presents documentation of the results of the SSU test program.

  18. Repurposing Mass-produced Internal Combustion Engines Quantifying the Value and Use of Low-cost Internal Combustion Piston Engines for Modular Applications in Energy and Chemical Engineering Industries

    Science.gov (United States)

    L'Heureux, Zara E.

    This thesis proposes that internal combustion piston engines can help clear the way for a transformation in the energy, chemical, and refining industries that is akin to the transition computer technology experienced with the shift from large mainframes to small personal computers and large farms of individually small, modular processing units. This thesis provides a mathematical foundation, multi-dimensional optimizations, experimental results, an engine model, and a techno-economic assessment, all working towards quantifying the value of repurposing internal combustion piston engines for new applications in modular, small-scale technologies, particularly for energy and chemical engineering systems. Many chemical engineering and power generation industries have focused on increasing individual unit sizes and centralizing production. This "bigger is better" concept makes it difficult to evolve and incorporate change. Large systems are often designed with long lifetimes, incorporate innovation slowly, and necessitate high upfront investment costs. Breaking away from this cycle is essential for promoting change, especially change happening quickly in the energy and chemical engineering industries. The ability to evolve during a system's lifetime provides a competitive advantage in a field dominated by large and often very old equipment that cannot respond to technology change. This thesis specifically highlights the value of small, mass-manufactured internal combustion piston engines retrofitted to participate in non-automotive system designs. The applications are unconventional and stem first from the observation that, when normalized by power output, internal combustion engines are one hundred times less expensive than conventional, large power plants. This cost disparity motivated a look at scaling laws to determine if scaling across both individual unit size and number of units produced would predict the two order of magnitude difference seen here. For the first

  19. Measures on fireside emission reduction during wood combustion in industrial furnaces; Massnahmen zur feuerungsseitigen Emissionsminderung bei der Holzverbrennung in gewerblichen Feuerungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Zuberbuehler, U.

    2002-07-01

    The combustion of natural wood chips in current automatic firing systems leads to emissions of NO{sub x} < 200 mg/m{sup 3} and Particular Matter (PM)<50 mg/m{sup 3}. During the combustion of chipboard residues NO{sub x} emissions can reach 1000 mg/m{sup 3} and PM 500 mg/m{sup 3}, as they accrue particularly at furniture industry and carpenters. To achieve better particle burnout and lower NO{sub x} concentrations a new firing concept has been developed and tested. State of the art in the area of commercial wood firings was the {lambda}- and temperature controlled underfeed firing. Based on this firing type, a stage combustion was realized by a separation of the furnace in primary and secondary combustion chamber. Within the first step of development the burnout zone was optimised to improve particle burnout with simultaneous particle separation. Secondary air supply was made with a special fan to produce a swirl flow inside the cylindrical combustion chamber. Similar as in a cyclone particles were carried in a reverse flow to the furnace wall where is sufficient time for burnout. The good mixing performance of air and combustion gases is another benefit of the produced swirl flow. The aim of further development was to achieve the necessary conditions for primary NO{sub x} reduction with a new design of the primary zone of the furnace. Therefore hot gas from the end of combustion chamber or exhaust gas was recirculated to reduce the amount of primary air. The new primary zone of the combustion chamber was combined with the well working burnout zone with integrated particle separation. The combustion behaviour of this combined furnace was investigated and optimised on a test stand. During continuous combustion of coated chipboards (fuel N-content 4,3%) NO{sub x} concentrations of 450 mg/m{sup 3} were measured, which correspond to a 40% reduction in comparison with a common underfed firing. CO concentrations of 30 mg/m{sup 3} were on a very low level and particle

  20. Modelling of an industrial environment, part 1.: Monte Carlo simulations of photon transport

    International Nuclear Information System (INIS)

    Kis, Z.; Eged, K.; Meckbach, R.; Voigt, G.

    2002-01-01

    After a nuclear accident releasing radioactive material into the environment the external exposures may contribute significantly to the radiation exposure of the population (UNSCEAR 1988, 2000). For urban populations the external gamma exposure from radionuclides deposited on the surfaces of the urban-industrial environments yields the dominant contributions to the total dose to the public (Kelly 1987; Jacob and Meckbach 1990). The radiation field is naturally influenced by the environment around the sources. For calculations of the shielding effect of the structures in complex and realistic urban environments Monte Carlo methods turned out to be useful tools (Jacob and Meckbach 1987; Meckbach et al. 1988). Using these methods a complex environment can be set up in which the photon transport can be solved on a reliable way. The accuracy of the methods is in principle limited only by the knowledge of the atomic cross sections and the computational time. Several papers using Monte Carlo results for calculating doses from the external gamma exposures were published (Jacob and Meckbach 1987, 1990; Meckbach et al. 1988; Rochedo et al. 1996). In these papers the Monte Carlo simulations were run in urban environments and for different photon energies. The industrial environment can be defined as such an area where productive and/or commercial activity is carried out. A good example can be a factory or a supermarket. An industrial environment can rather be different from the urban ones as for the types and structures of the buildings and their dimensions. These variations will affect the radiation field of this environment. Hence there is a need to run new Monte Carlo simulations designed specially for the industrial environments

  1. The measurement of customer service quality as a competitive strategy in an industrial environment

    OpenAIRE

    2012-01-01

    M.Tech. This study deals with the measurement of customer service quality in an industrial environment. The concept was to measure service quality and then develop a competitive strategy based on this. The mechanism used is the SERVQUAL model. Subsequently reengineering aspects of customer service based on the findings is proposed as a competitive advantage. The study is diagnostic in nature offering insights on the application of a well researched service quality model in an industrial en...

  2. Data on the global environment. The state of Denmark's environment compared with other industrial countries

    International Nuclear Information System (INIS)

    1995-01-01

    A summary, and a selection of significant information, taken from the OECD (Organization for Economic Co-operation and Development) documents: The State of the Environment (1991) and Environmental Indicators (1991) and the ECE (United Nations Economic Commission for Europe) report: The Environment in Europe and North America: Annotated Statistics 1992, and from a few other sources. The document is a translation of the Swedish publication: Miljoevaer(l)den. Statistics and other information relate to air pollution, flora and fauna, the condition of forests and of the North and Baltic Seas, water pollution, wastes, chemicals, oil spills, energy production and consumption, traffic, environmental hazards, public anxiety related to the environment, environmental protection, population densities during 1989 and international conventions on environmental protection. Most of the datas relate to the nineteen eighties. (AB)

  3. Appraisal of the Visual Environment in an Industrial Factory: a Case Study in Subtropical Climates

    Directory of Open Access Journals (Sweden)

    Kieu Pham

    2016-12-01

    Full Text Available The physiological and psychological benefits of daylighting for office occupants have been well explored. Current research usually focuses on visual comfort in office buildings. However, there is limited knowledge about daylight quality in industrial work environments. In Australia, most industrial buildings are built from standard factory structures that employ daylight from skylights and large door openings, with little consideration to daylighting design strategies and visual comfort. In bright sky conditions as those present in Australia, large openings can become a source of visual discomfort. It is important to understand how workers perceive the luminous environment in this type of work setting. This research explored the perception of daylighting in an industrial work environment. Qualitative measures (questionnaires, interviews, and observational mapping and quantitative measures (physical data were collected over a four week period to examine the type of visual comfort perceived by industrial workers. The results suggests that the desirability to have windows and to have access to a view were important features in this work setting. Access for task lighting and reports of uneven daylighting were indicative to the varying levels of illuminance under intermediate sky conditions. This was reflected in the daylight glare index results and comparisons to the background luminance and glare source luminance, indicating that adaptation may be the cause of responses to daylighting being uneven. The results suggests a need for further research into the quality of the luminous environment in industrial work settings.

  4. Fiscal 1993-1998 integrated research report. R and D on advanced combustion technology under microgravity environment; 1993 - 1998 nendo sogo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For developing advanced combustion technology by using JAMIC's facility, the advanced combustion technology research committee supported by researchers of universities, national institutes and industries was prepared in JSUP, and R and D using a microgravity experiment facility and the international joint research with NASA were carried out. By using the advanced experimental equipment and measuring instrument developed for microgravity experiments, studies were made on combustion and evaporation of fuel droplets, combustion characteristics of dense fuel, flammability limit and NO{sub x} generation mechanism, and such precious results were obtained as storage of abundant experimental data, explication of a combustion mechanism, preparation of a database and find of new phenomena. In the ground verification experiment using the newly fabricated advanced combustor test equipment, various data effective for developing high-efficiency low-pollution combustors were obtained. Through the joint research with NASA including 5 themes, various results and the real relationship between the researchers were also obtained. (NEDO)

  5. Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

    International Nuclear Information System (INIS)

    2005-01-01

    The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 6 problem sessions as follow: Environmental protection, earth sciences, protection of cultural objects; Industrial applications; applications in medicine, medical apparatus; measurement methods, simulations, experiment planning; radiation techniques; laboratories, metrology

  6. A room acoustical computer model for industrial environments - the model and its verification

    DEFF Research Database (Denmark)

    Christensen, Claus Lynge; Foged, Hans Torben

    1998-01-01

    This paper presents an extension to the traditional room acoustic modelling methods allowing computer modelling of huge machinery in industrial spaces. The program in question is Odeon 3.0 Industrial and Odeon 3.0 Combined which allows the modelling of point sources, surface sources and line...... of an omnidirectional sound source and a microphone. This allows the comparison of simulated results with the ones measured in real rooms. However when simulating the acoustic environment in industrial rooms, the sound sources are often far from being point like, as they can be distributed over a large space...

  7. Tools of integration of innovation-oriented machine-building enterprises in industrial park environment

    Directory of Open Access Journals (Sweden)

    К.О. Boiarynova

    2017-08-01

    Full Text Available The research is devoted to the development of the tools for the integration of innovation-oriented mechanical engineering enterprises into the environment of industrial park as functional economic systems, which are capable on the own development basis to provide the development of resident enterprises. The article analyzes the opportunities for the development of mechanical engineering enterprises. The formed structure of the mechanism of integration of mechanical engineering enterprises as functional economic systems into the industrial park environment is based on: 1 the development of participation programs in the industrial park of the mechanical engineering enterprises as an innovation-oriented partner, which foresees the development of the enterprise immediately and the development of other residents; 2 the provision of high-tech equipment of resident enterprises of industrial parks; 3 the creation of subsidiary-spin-out enterprises of large mechanical engineering enterprises for high-tech production in the industrial park. The author proposes the road map that reveals the procedures for the integration and functioning the investigated enterprises through interaction as well as in the ecosystem of the industrial park and in the general ecosystem of functioning, and the tools for providing economic functionality through economic and organizational proceedings at preventive, partner and resident phases of integration. The tools allow the innovation-oriented mechanical engineering enterprises to integrate into such territorial structures as industrial parks, this in complex will allow carrying out their purposes in the development of the real sector of the economy.

  8. Impact of Industrialization on Environment and Sustainable Solutions - Reflections from a South Indian Region

    Science.gov (United States)

    Patnaik, Rasmi

    2018-03-01

    Industrialization has brought economic prosperity; additionally it has resulted in more population, urbanization, obvious stress on the basic life supporting systems while pushing the environmental impacts closer to the threshold limits of tolerance. With booming industrial growth and relatively low land mass, environmental sustainability is now becoming a significant deciding factor in industrial development process. Accumulating evidences constantly indicate that the transition of the existing industries into eco-industrial network through successful implementation of green approaches provides a viable solution to preserve the natural resources of the region while concurrently enhances the regional economy on a sustainable basis. It calls for an appropriate planning and integrated framework in harmony with the environment, after careful assessment of past and prevailing conditions. The empirical knowledge on affected area helps understanding the local context and developing further course of action based on ground realities. With this aim, a study was conducted on the current industrial pollution and environmental setting of Puducherry. A causal chain analysis indicated severe impacts of industrialization on local environment while highlighting its immediate and root causes. The findings form a base for suggesting sustainable solutions to curb rampant pollution in Puducherry region and similar scenarios found across the world.

  9. Optimization of the combustion of SOME (soybean oil methyl ester), B5, B10, B20 and petrodiesel in a semi industrial boiler

    International Nuclear Information System (INIS)

    Ghorbani, Afshin; Bazooyar, Bahamin

    2012-01-01

    This paper characterizes combustion of petrodiesel and prevalent SOME blends (B100, B5, B10 and B20), which were produced through an alkali-based transesterification in PUT, in a semi industrial boiler by determining its efficiency, exhaust emissions and costs. First, the influence of oxygen content of stock gases (by volume percent) upon regular emissions, thermal efficiency and costs (calculated by a cost function) was studied in order to investigate the performance and feasibility of using biodiesel in the boiler. In the next level, a multi-objective optimization method, named cost-based optimization, was represented and optimized the combustion of the fuels. The overall efficiency of the boiler obtained with the different fuels is comparable for the same operating points. Soy bean methyl ester and the blends emitted lower emissions than petrodiesel. Results demonstrate that the use of pure biodiesel is not economically feasible in the boiler. The total costs of the boiler obtained with the blends and petrodiesel are quite competitive. B5 is introduced to be the best fuel for using in the boiler. Results also reveal an optimum (“compromise”) in total cost of all the fuels in relation to the oxygen concentration of stock gases, which promises a cost saving in the boiler performance. -- Highlights: ► Efficiency, emissions and economy of the boiler fuelled with SOME, B5, B10, B20 and petrodiesel are investigated. ► The use of pure biodiesel was not economically feasible while economy of the blends and petrodiesel is competitive. ► B5 is introduced to be the most appropriate and economic fuel for the boiler. ► Presentation of a cost-based method optimization method. ► Introducing an optimum, “compromise”, O 2 % for the combustion of each fuel which promises a cost saving.

  10. Environment supervision in a nuclear industry plant: Cogema example in Pierrelatte

    International Nuclear Information System (INIS)

    Faure, M.L.

    1993-07-01

    Every nuclear industrial facility must achieve radioactivity measurements of its environment: COGEMA is therefore very careful of its environmental quality and guarantees the supervision of it with a programme corresponding to the activities and to the environment characteristics. We shall study- the atmospheric control- the waters control- the plants control and we shall end on results synthesis, which must be analysed according to the natural omnipresent radioactivity. 6 Annexes

  11. Sustainable diets: The interaction between food industry, nutrition, health and the environment.

    Science.gov (United States)

    Alsaffar, Ayten Aylin

    2016-03-01

    Everyday great amounts of food are produced, processed, transported by the food industry and consumed by us and these activities have direct impact on our health and the environment. The current food system has started causing strain on the Earth's natural resources and that is why sustainable food production systems are needed. This review article discusses the need for sustainable diets by exploring the interactions between the food industry, nutrition, health and the environment, which are strongly interconnected. The most common environmental issues in the food industry are related to food processing loss, food wastage and packaging; energy efficiency; transportation of foods; water consumption and waste management. Among the foods produced and processed, meat and meat products have the greatest environmental impact followed by the dairy products. Our eating patterns impact the environment, but the environment can impact dietary choices as well. The foods and drinks we consume may also affect our health. A healthy and sustainable diet would minimise the consumption of energy-dense and highly processed and packaged foods, include less animal-derived foods and more plant-based foods and encourage people not to exceed the recommended daily energy intake. Sustainable diets contribute to food and nutrition security, have low environmental impacts and promote healthy life for present and future generations. There is an urgent need to develop and promote strategies for sustainable diets; and governments, United Nations agencies, civil society, research organisations and the food industry should work together in achieving this. © The Author(s) 2016.

  12. 'Create the future': an environment for excellence in teaching future-oriented Industrial Design Engineering

    NARCIS (Netherlands)

    Eger, Arthur O.; Lutters, Diederick; van Houten, Frederikus J.A.M.

    2004-01-01

    In 2001, the University of Twente started a new course on Industrial Design Engineering. This paper describes the insights that have been employed in developing the curriculum, and in developing the environment in which the educational activities are facilitated. The University of Twente has a broad

  13. A Survey of Security Tools for the Industrial Control System Environment

    Energy Technology Data Exchange (ETDEWEB)

    Hurd, Carl M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); McCarty, Michael V. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-06-12

    This report details the results of a survey conducted by Idaho National Laboratory (INL) to identify existing tools which could be used to prevent, detect, mitigate, or investigate a cyber-attack in an industrial control system (ICS) environment. This report compiles a list of potentially applicable tools and shows the coverage of the tools in an ICS architecture.

  14. A Survey of Security Tools for the Industrial Control System Environment

    International Nuclear Information System (INIS)

    Hurd, Carl M.; McCarty, Michael V.

    2017-01-01

    This report details the results of a survey conducted by Idaho National Laboratory (INL) to identify existing tools which could be used to prevent, detect, mitigate, or investigate a cyber-attack in an industrial control system (ICS) environment. This report compiles a list of potentially applicable tools and shows the coverage of the tools in an ICS architecture.

  15. Development and Deployment of a Library of Industrially Focused Advanced Immersive VR Learning Environments

    Science.gov (United States)

    Cameron, Ian; Crosthwaite, Caroline; Norton, Christine; Balliu, Nicoleta; Tadé, Moses; Hoadley, Andrew; Shallcross, David; Barton, Geoff

    2008-01-01

    This work presents a unique education resource for both process engineering students and the industry workforce. The learning environment is based around spherical imagery of real operating plants coupled with interactive embedded activities and content. This Virtual Reality (VR) learning tool has been developed by applying aspects of relevant…

  16. Second biomass conference of the Americas: Energy, environment, agriculture, and industry. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    This volume provides the proceedings for the Second Biomass Conference of the Americas: Energy, Environment, Agriculture, and Industry which was held August 21-24, 1995. The volume contains copies of full papers as provided by the researchers. Individual papers were separately indexed and abstracted for the database.

  17. Assessment of an atmospheric fluidized-bed coal-combustion gas-turbine cogeneration system for industrial application

    Energy Technology Data Exchange (ETDEWEB)

    Graves, R. L.; Holcomb, R. S.; Tallackson, J. R.

    1979-10-01

    This study was initiated to provide information on the future potential industrial market for a cogeneration system consisting of a fluidized-bed coal combustor coupled to a gas-turbine (Brayton cycle) power system that uses air as the working fluid. In assessing the potential applications for the system, the process heat energy consumption by industry is identified, with special detail included on the six most energy-intensive industries. The potential impact on the nation's oil and natural gas consumption that would result from wide-spread utilization of coal for process heat is also estimated. The fraction of industrial process heat that the system could feasibly satisfy from a thermodynamic viewpoint is estimated, and the performance (potential fuel efficiency and heat/power ratio) of the atmospheric fluidized-bed gas-turbine system is calculated. Also treated are several specific case studies of industries in which the system could be incorporated. Major parameters are specified, and flow sheets are derived for systems that would satisfy the heat and power requirements of the process or industry. The overall fuel utilization efficiency, thermal power rating, and potential number of installations are specified for these case studies. The findings of the study indicate that there is a sizable potential market for the system, with over 1000 possible installations disclosed after reviewing only 8 specific industries from 6 major Standard Industrial Classification (SIC) groups. The potential displacement of oil and gas by coal in process heating is shown to be about 1.60 m/sup 3//sec (870,000 bbl/d) of oil and 4590 m/sup 3//sec (14.0 billion ft/sup 3//d) of natural gas for all industries combined. Continued development of the fluidized-bed coal combustor and power system is recommended so that this potential may be at least partially realized.

  18. Scientific Committee of the Institute for the Study of Combustible Minerals discusses 'New processes in the coking by-product industry'

    Energy Technology Data Exchange (ETDEWEB)

    Lisitskaya, R.K.

    1982-05-01

    This paper summarizes reports presented at the Moscow Institute for the Study of Combustible Minerals on Nov. 18, 1981. Introduction of high power unit aggregates in metallurgy is one characteristic of the new trend. Dinas refractory materials were used for brickwork because of their assumed higher thermal conductivity; comparative evaluations, however, proved that oven wall thermal conductivity for Dinas and other brick is approximately the same. Further Dinas research is planned. Considering coke battery operating conditions the expediency of increasing average coke oven size to 450-460 mm in width is discussed. This is expectd to increase efficiency and overall productivity. Partial and complete briquetting with and without binder was discussed including its positive effects and drawbacks when used on an industrial scale in the USSR. Lack of domestic, highly efficient presses and scarcity of binders, mixers and loaders present particular hindrances. Preference is given to partial briquetting without binder due to shortages or lack of domestic equipment.

  19. The implementation of clean development mechanism (CDM) in the construction and built environment industry

    International Nuclear Information System (INIS)

    Mok, Ken L.; Han, Seung H.; Choi, Seokjin

    2014-01-01

    Greenhouse gas emissions due to human activities are the main contributors to global climate change, a problem that should not be ignored. Through the clean development mechanism (CDM) introduced under the Kyoto Protocol, developing countries are able to earn certified emission reduction (CER) credits through a myriad of emission reduction projects. This study aims to explore the potential of implementing CDM projects in the construction and built environment (C and BE) industry, which has been criticized for not only consuming an enormous amount of resources, but also for contributing to adverse environmental health. In this research, we limit the boundary of the C and BE industry to include the planning, procurement, construction, occupation and refurbishment/demolition phases of a project's life cycle. Surveys and in-depth follow-up interviews with experts have generated useful insights pertaining to CDM potential and its adaptation into the C and BE industry. From this foundation, this paper evaluates the current obstacles to CDM and presents feasible suggestions to increase CDM projects related to the C and BE industry. - Highlights: • We review the development and limitation of CDM relates to the construction and built environment (C and BE) industry. • We obtain experts' opinions on the feasibility of CDM in the C and BE industry. • Validation, monitoring, verification and additionality of CDM projects are crucial. • Experts agreed that most of our suggestions are feasible in principle

  20. Subsurface characterization of an oxidation-induced phase transformation and twinning in nickel-based superalloy exposed to oxy-combustion environments

    International Nuclear Information System (INIS)

    Zhu Jingxi; Holcomb, Gordon R.; Jablonski, Paul D.; Wise, Adam; Li Jia; Laughlin, David E.; Sridhar, Seetharaman

    2012-01-01

    Highlights: ►Oxidation products of Ni-based superalloy were studied in oxy-fuel combustion conditions. ► An oxidation-induced phase transformation occurred in the subsurface region. ► One of the two product phases was not in the Ni database of Thermo-Calc. ► This unknown phase is an ordered derivative of FCC structure of Ni–Ti(–Ta) system. ► This phase is likely detrimental to the mechanical integrity of the alloy in use. - Abstract: In the integration of oxy-fuel combustion to turbine power generation system, turbine alloys are exposed to high temperature and an atmosphere comprised of steam, CO 2 and O 2 . While surface and internal oxidation of the alloy takes place, the microstructure in the subsurface region also changes due to oxidation. In this study, bare metal coupons of Ni-base superalloys were exposed in oxy-fuel combustion environment for up to 1000 h and the oxidation-related microstructures were examined. Phase transformation occurred in the subsurface region in Ni-based superalloy and led to twinning. The transformation product phases were analyzed through thermodynamic equilibrium calculations and various electron microscopy techniques, including scanning electron microscopy (SEM), orientation imaging microscopy (OIM) and transmission electron microscopy (TEM). The mechanism by which the phase transformation and the formation of the microstructure occurred was also discussed. The possible effects of the product phases on the performance of the alloy in service were discussed.

  1. System dynamics model for environment - human systems interaction in the mining industry

    International Nuclear Information System (INIS)

    Pal, B.K.

    1994-01-01

    Use of advanced technology in the mining activities are polluting the natural environment, interfering with the normal life of the miners/residents. In this paper, health hazards due to underground workings and effect of environmental conditions on men are discussed. A composite system inter-relationship of the mining industries with the Government, society and environmental sectors is established. Allowing certain level of pollution, a system dynamics model is developed considering the parameters like more revenues from the mining industries, degradation of quality of life index - environmental index on long-term and short-term basis, new diseases due to pollution, social awareness, health care facilities, tax exemption etc. This model will help us to understand the optimisation of the parameters to establish the better interaction in the environment-human systems in the mining industries. 14 refs., 4 figs., 2 tabs

  2. Computational Modeling of Turbulent Spray Combustion

    NARCIS (Netherlands)

    Ma, L.

    2016-01-01

    The objective of the research presented in this thesis is development and validation of predictive models or modeling approaches of liquid fuel combustion (spray combustion) in hot-diluted environments, known as flameless combustion or MILD combustion. The goal is to combine good physical insight,

  3. Sandia Combustion Research Program

    Energy Technology Data Exchange (ETDEWEB)

    Johnston, S.C.; Palmer, R.E.; Montana, C.A. (eds.)

    1988-01-01

    During the late 1970s, in response to a national energy crisis, Sandia proposed to the US Department of Energy (DOE) a new, ambitious program in combustion research. Shortly thereafter, the Combustion Research Facility (CRF) was established at Sandia's Livermore location. Designated a ''user facility,'' the charter of the CRF was to develop and maintain special-purpose resources to support a nationwide initiative-involving US inventories, industry, and national laboratories--to improve our understanding and control of combustion. This report includes descriptions several research projects which have been simulated by working groups and involve the on-site participation of industry scientists. DOE's Industry Technology Fellowship program, supported through the Office of Energy Research, has been instrumental in the success of some of these joint efforts. The remainder of this report presents results of calendar year 1988, separated thematically into eleven categories. Referred journal articles appearing in print during 1988 and selected other publications are included at the end of Section 11. Our traditional'' research activities--combustion chemistry, reacting flows, diagnostics, engine and coal combustion--have been supplemented by a new effort aimed at understanding combustion-related issues in the management of toxic and hazardous materials.

  4. A Sustainable Industry-Environment Model for the Identification of Urban Environmental Risk to Confront Air Pollution in Beijing, China

    OpenAIRE

    Guilin Gao; Xueting Zeng; Chunjiang An; Lei Yu

    2018-01-01

    In this study, an optimized industry-environment model is proposed for identifying environmental risk under uncertainties. The strategy associated with an emission-permit trading mechanism has been introduced into the industrial-environment regulation (model) for remitting the pressures of frequent/severe haze events in Beijing City. A dual stochastic mixed fuzzy risk analysis method with Laplace’s criterion (DSFRL) can be embedded into industry-environment issues with a trading emission-perm...

  5. Studying the pollution of Barada river environment with poisonous elements resulting from leather industry (i.e. tanning industry)

    International Nuclear Information System (INIS)

    Khamis, I.; Al-Masri, M.S.; Sarheel, A.; Al-Somel, N.

    2000-07-01

    The impact of tanning and electroplating industry on the eastern part of Barada river environment has been evaluated. Sediment, soil and plant samples were collected from nine sites at the river near the eastern industrial complex during 1999. Results of instrumental neutron activation analysis have shown high levels of chrome in sediment collected near the tanning factories; the highest value obtained being 2692 ppm. In addition, relatively high levels of Cr were also found in the agriculture soil collected near the riverbank in the industrial complex; Cr concentrations in plant leaves grown at riverbank were found low and this due strong bounding of Cr to soil. Other trace metals such as copper was about 4000 ppm, which is much higher than the natural levels; electroplating shops are the main source of this element in the area. Furthermore, concentrations of the studied trace metals have decreased as the elements were found to be at low concentrations, but the obtained data can be used as a baseline for future monitoring. (Author)

  6. Course of change in economic and social environment associated with energy. Population, life, industry

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimatsu, Michio

    1988-03-01

    As regards long-term forecast of economic and social environment in Japan, STANDARD economic and social vision based on the course of economical growth was adopted in the report of LONG-TERM VISION OF ENERGY INDUSTRY. The average annual economic growth rate is expected to be still a little higher than the average of that of the developed countries, being supported by the industiral activities by industries engaged in frontier science, manufacturing industries engaged in electrical processing and assembling, etc. In the primary and secondary industries, the number of employees may drop down to about one third. Tokyo may become the center of finance and information surpassing New York and London. The people may enjoy a rich, confortable and cultural life. Problems may arise from enhancement of individualism, increase in advanced aged population, acturization of regional differentials, etc. (3 figs, 3 tabs)

  7. Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

    International Nuclear Information System (INIS)

    1998-01-01

    The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 8 problem sessions as follow: Radiation technologies of flue gas purification; radiation technologies in food and cosmetic industry; application of nuclear techniques in environmental studies and earth science; radiometric methods in material engineering; isotope tracers in biological studies and medical diagnostics; radiometric industrial measuring systems; radiation detectors and device; nuclear methods in cultural objects examination. The poster section as well as small exhibition have been also organised

  8. Mastering Foreign Language Competence of Ecology and Environment Managers for Mining Industry of Kuzbass

    Science.gov (United States)

    Greenwald, Oksana; Islamov, Roman; Sergeychick, Tatyana

    2017-11-01

    The necessity to solve nature conservation problems of Kuzbass mining industry demands from postgraduate education institutions to train highly qualified specialists in ecology and environment management. As 21st century education is competence-based one, the article clarifies the concept of competence in education, focuses on key competences, namely foreign language competence and its relevance for specialists in ecology and environment management. Foreign language competence is acquired through the course of "Foreign Language" discipline which covers the following aspects: academic reading, academic writing and public speaking. The article also describes the experience of organizing students' individual work taking into account their motivation and specific conditions of the discipline as well. Thus, both the content of the discipline and the approach to organize students' learning contribute to mastering foreign language competence of ecology and environment managers as inherent condition of their professional efficiency for solving ecological problems of mining industry in Kuzbass region.

  9. A Social Contract for University-Industry Collaboration: A Case of Project-Based Learning Environment

    Science.gov (United States)

    Vartiainen, Tero

    This study determines a social contract for a form of university-industry collaboration to a project-based learning environment in close collaboration with industry. The author's previous studies on moral conflicts in a project-based learning (PjBL) environment and his 5-year engagement in the PjBL environment are used as background knowledge, and John Rawls' veil of ignorance is used as a method in the contract formulation. Fair and impartial treatment of actors is strived for with the contract which constitutes of sets of obligations for each party, students, clients, and university (instructors) in the chosen project course. With the contract fair and impartial treatment of actors is strived for and the most dilemmatic moral conflicts are tried to be avoided. The forming of the social contract is evaluated, and implications for research and collaborations in practice are offered.

  10. First Biomass Conference of the Americas: Energy, environment, agriculture, and industry; Proceedings, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-10-01

    This conference was designed to provide a national and international forum to support the development of a viable biomass industry. Although papers on research activities and technologies under development that address industry problems comprised part of this conference, an effort was made to focus on scale-up and demonstration projects, technology transfer to end users, and commercial applications of biomass and wastes. The conference was divided into these major subject areas: Resource Base, Power Production, Transportation Fuels, Chemicals and Products, Environmental Issues, Commercializing Biomass Projects, Biomass Energy System Studies, and Biomass in Latin America. The papers in this first volume deal with Resource Base and Power Production. The particular subjects within the Resource Base area are Biomass, Wastes and Residues, Feedstock Research, and Commercial Systems. The emphasized subjects within the Power Production area are Combustion, Thermal and Biological Gasification, Waste Generation and Waste Disposal and Waste Emissions, and Heat, Steam, and Fuels-Commercial Systems. Selected abstracts have been indexed separately for inclusion in the Energy Science and Technology Database.

  11. Industry Environment And Business Strategy: A Comparison Of Contingency Theory Expectations And Relationships Between Small Manufacturing Firm Managers Perceptions Of Environment And Strategy

    OpenAIRE

    Alfred M. Pelham; Pamela Lieb

    2011-01-01

    Contingency theory suggests that that an appropriate match must be made between strategy and industry environment conditions. This study compared contingency theory expectations with the associations between perceptions of industry environment conditions and reported firm strategy, as reported by the firms president and national sales manager. Confirming theory expectations, there were significant and positive associations between perceived industry technical/market turbulence and reported gr...

  12. Basic strategies in the electric power industry in the new competitive environment

    International Nuclear Information System (INIS)

    Ribeiro Filho, Ary Pinto; Moraes, Walter Fernando Araujo de

    1999-01-01

    This work identifies the probable strategic characteristics of the interconnected North-Northeast Brazilian electricity industry, after the current restructuring and privatization process has been implemented. It is a 15.0 thousand MW generation industry supplying more than 33.5 million consumers. The normative scenery for analysis of the electricity industry takes into consideration the premises that the government establishes the vertical separation of generation, transmission, distribution and retailing, and introduces the regulation to a competitive industrial structure in generation and retailing. It is assumed that free access to transmit and distribute electricity and broad choices for consumers are the main features for competition in both generation and retailing. The essence of formulating strategy is to relate a company with its environment, considering the industrial structure. The probable generic strategies and industrial trends are presented, and considerations are made concerned with the future expansion capacity. Finally, in the new industrial structure which will settle after the deregulation and privatization, the main strategic issues of the companies will likely focus on: profitability, cost control, managerial competence, consumer behavior, and new technologies, in special the ones related to modern thermal power plants. (author)

  13. Hierarchical Nanoceramics for Industrial Process Sensors

    Energy Technology Data Exchange (ETDEWEB)

    Ruud, James, A.; Brosnan, Kristen, H.; Striker, Todd; Ramaswamy, Vidya; Aceto, Steven, C.; Gao, Yan; Willson, Patrick, D.; Manoharan, Mohan; Armstrong, Eric, N., Wachsman, Eric, D.; Kao, Chi-Chang

    2011-07-15

    This project developed a robust, tunable, hierarchical nanoceramics materials platform for industrial process sensors in harsh-environments. Control of material structure at multiple length scales from nano to macro increased the sensing response of the materials to combustion gases. These materials operated at relatively high temperatures, enabling detection close to the source of combustion. It is anticipated that these materials can form the basis for a new class of sensors enabling widespread use of efficient combustion processes with closed loop feedback control in the energy-intensive industries. The first phase of the project focused on materials selection and process development, leading to hierarchical nanoceramics that were evaluated for sensing performance. The second phase focused on optimizing the materials processes and microstructures, followed by validation of performance of a prototype sensor in a laboratory combustion environment. The objectives of this project were achieved by: (1) synthesizing and optimizing hierarchical nanostructures; (2) synthesizing and optimizing sensing nanomaterials; (3) integrating sensing functionality into hierarchical nanostructures; (4) demonstrating material performance in a sensing element; and (5) validating material performance in a simulated service environment. The project developed hierarchical nanoceramic electrodes for mixed potential zirconia gas sensors with increased surface area and demonstrated tailored electrocatalytic activity operable at high temperatures enabling detection of products of combustion such as NOx close to the source of combustion. Methods were developed for synthesis of hierarchical nanostructures with high, stable surface area, integrated catalytic functionality within the structures for gas sensing, and demonstrated materials performance in harsh lab and combustion gas environments.

  14. Managing ash from the combustion of solid waste

    International Nuclear Information System (INIS)

    Hauser, R.

    1992-01-01

    This paper reports that with millions of tons of refuse being combusted each year, increasing concern over the environment impact of the residue produced has caused both regulators and the resource recovery industry to address the technical and regulatory issues relating to the safe handling and disposal of ash. The basic issue concerning solid waste combustion ash management in this country is how, based on past, recent, and ongoing scientific research, solid waste combustion ash should be handled. Typically, refuse contains approximately 20 to 25 percent residue, which is collected either on grates at the bottom of the combustion chamber or filtered from the exhaust gases by the air pollution control equipment. The fly ash component of the total residue stream is between 10 and 30 percent of the total residue while the bottom ash content ranges from 70 to 90 percent of the total weight, depending upon the air pollution control equipment utilized, especially acid gas scrubbing equipment

  15. Pervasive Radio Mapping of Industrial Environments Using a Virtual Reality Approach.

    Science.gov (United States)

    Nedelcu, Adrian-Valentin; Machedon-Pisu, Mihai; Duguleana, Mihai; Talaba, Doru

    2015-01-01

    Wireless communications in industrial environments are seriously affected by reliability and performance issues, due to the multipath nature of obstacles within such environments. Special attention needs to be given to planning a wireless industrial network, so as to find the optimum spatial position for each of the nodes within the network, and especially for key nodes such as gateways or cluster heads. The aim of this paper is to present a pervasive radio mapping system which captures (senses) data regarding the radio spectrum, using low-cost wireless sensor nodes. This data is the input of radio mapping algorithms that generate electromagnetic propagation profiles. Such profiles are used for identifying obstacles within the environment and optimum propagation pathways. With the purpose of further optimizing the radio planning process, the authors propose a novel human-network interaction (HNI) paradigm that uses 3D virtual environments in order to display the radio maps in a natural, easy-to-perceive manner. The results of this approach illustrate its added value to the field of radio resource planning of industrial communication systems.

  16. Pervasive Radio Mapping of Industrial Environments Using a Virtual Reality Approach

    Science.gov (United States)

    Nedelcu, Adrian-Valentin; Machedon-Pisu, Mihai; Talaba, Doru

    2015-01-01

    Wireless communications in industrial environments are seriously affected by reliability and performance issues, due to the multipath nature of obstacles within such environments. Special attention needs to be given to planning a wireless industrial network, so as to find the optimum spatial position for each of the nodes within the network, and especially for key nodes such as gateways or cluster heads. The aim of this paper is to present a pervasive radio mapping system which captures (senses) data regarding the radio spectrum, using low-cost wireless sensor nodes. This data is the input of radio mapping algorithms that generate electromagnetic propagation profiles. Such profiles are used for identifying obstacles within the environment and optimum propagation pathways. With the purpose of further optimizing the radio planning process, the authors propose a novel human-network interaction (HNI) paradigm that uses 3D virtual environments in order to display the radio maps in a natural, easy-to-perceive manner. The results of this approach illustrate its added value to the field of radio resource planning of industrial communication systems. PMID:26167533

  17. Pervasive Radio Mapping of Industrial Environments Using a Virtual Reality Approach

    Directory of Open Access Journals (Sweden)

    Adrian-Valentin Nedelcu

    2015-01-01

    Full Text Available Wireless communications in industrial environments are seriously affected by reliability and performance issues, due to the multipath nature of obstacles within such environments. Special attention needs to be given to planning a wireless industrial network, so as to find the optimum spatial position for each of the nodes within the network, and especially for key nodes such as gateways or cluster heads. The aim of this paper is to present a pervasive radio mapping system which captures (senses data regarding the radio spectrum, using low-cost wireless sensor nodes. This data is the input of radio mapping algorithms that generate electromagnetic propagation profiles. Such profiles are used for identifying obstacles within the environment and optimum propagation pathways. With the purpose of further optimizing the radio planning process, the authors propose a novel human-network interaction (HNI paradigm that uses 3D virtual environments in order to display the radio maps in a natural, easy-to-perceive manner. The results of this approach illustrate its added value to the field of radio resource planning of industrial communication systems.

  18. The Action Plan Against Repetitive Work - An Industrial Relation Strategy for Improving the Working Environment

    DEFF Research Database (Denmark)

    Hasle, Peter; Møller, Niels

    2001-01-01

    The Danish Action Plan against Repetitive Work is presented and discussed as a possible new strategy for regulating repetitive work as well as other complicated working environment problems. The article is based on an empirical evaluation ot the Action Plan. The asseessment of the Action Plan...... indicates that a measurable reduction of repetitive work has been achieved, while recognizing the the new management strategies focusing on human resources development have also played an important role. These results are used to suggest that - under certain conditions - a combination of state regulation...... and industrial relation agreements can be used to regulate other working environment problems....

  19. The analysis of macro-environment for the pork meat industry from Romania

    Directory of Open Access Journals (Sweden)

    Genoveva Buzamat

    2013-05-01

    Full Text Available Abstract For the realization of this study we used PESTEc analysis of the external environment (politico-legal, economic, social and technological in order to highlight the opportunities which can lead to a higher efficiency of the economic activity or the threats represented by the potential impediments which could prevent the development of the economic activity of the studied company. The study was realized on a company which has as activity the raising of porcine, but due to confidentiality reasons we will not divulge its name. Keywords :industry, macro-environment,  meat, pork

  20. Applying the National Industrial Security Program (NISP) in the laboratory environment

    International Nuclear Information System (INIS)

    Bruckner, D.G.

    1995-01-01

    With continuing changes in the world safeguards and security environment the effectiveness of many laboratory operations depends on correctly assessing the risk to its programs and developing protection technologies, research and concepts of operations being employed by the scientific community. This paper explores the opportunities afforded by the National Industrial Security Program (NISP) to uniformly and simply protect Laboratory security assets, sensitive and classified information and matter, during all aspects of a laboratory program. The developments in information systems, program security, physical security and access controls suggest an industrial security approach. This paper's overall objective is to indicate that the Laboratory environment is particularly well suited to take advantage being pursued by NISP and the performance objectives of the new DOE orders

  1. Does Psychosocial Work Environment Factors Predict Stress and Mean Arterial Pressure in the Malaysian Industry Workers?

    Directory of Open Access Journals (Sweden)

    Muhammad Umair Javaid

    2018-01-01

    Full Text Available Psychosocial risks are considered as a burning issue in the Asia-Pacific region. The aim of this study was to investigate the impact of psychosocial work environment factors on health of petrochemical industry workers of Malaysia. In lieu to job demands-resources theory, significant positive associations were found between quantitative demands, work-family conflict, and job insecurity with stress, while a significant negative association of role clarity as a resource factor with stress was detected. We also found that quantitative demands were significantly associated with the mean arterial pressure (MAP. Multistage sampling procedure was used to collect study sample. Structural Equation Modeling was used to identify relationship between the endogenous and exogenous variables. Finally, the empirically tested psychosocial work environment model will further help in providing a better risk assessment in different industries and enterprises.

  2. Does Psychosocial Work Environment Factors Predict Stress and Mean Arterial Pressure in the Malaysian Industry Workers?

    Science.gov (United States)

    Javaid, Muhammad Umair; Isha, Ahmad Shahrul Nizam; Sabir, Asrar Ahmed; Ghazali, Zulkipli; Nübling, Matthias

    2018-01-01

    Psychosocial risks are considered as a burning issue in the Asia-Pacific region. The aim of this study was to investigate the impact of psychosocial work environment factors on health of petrochemical industry workers of Malaysia. In lieu to job demands-resources theory, significant positive associations were found between quantitative demands, work-family conflict, and job insecurity with stress, while a significant negative association of role clarity as a resource factor with stress was detected. We also found that quantitative demands were significantly associated with the mean arterial pressure (MAP). Multistage sampling procedure was used to collect study sample. Structural Equation Modeling was used to identify relationship between the endogenous and exogenous variables. Finally, the empirically tested psychosocial work environment model will further help in providing a better risk assessment in different industries and enterprises.

  3. Electromagnetic compatibility (EMC) part 6-2 : generic standards : immunity for industrial environments

    CERN Document Server

    International Electrotechnical Commission. Geneva

    1999-01-01

    Applies to electrical and electronic apparatus intended for use in industrial environments, for which no designed product or product-family immunity standard exists. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered, in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharges. Test requirements are specified for each port considered. Apparatus intended to be used in industrial locations are characterized by the existence of one or more of the following: - a power network exists powered by a high or medium voltage power transformer for the supply of an installation feeding manufacturing or similar plant; - industrial, scientific and medical (ISM) apparatus; - heavy inductive or capacitive loads are frequently switched; - currents and associated magnetic fields are high.

  4. Does Psychosocial Work Environment Factors Predict Stress and Mean Arterial Pressure in the Malaysian Industry Workers?

    OpenAIRE

    Javaid, Muhammad Umair; Isha, Ahmad Shahrul Nizam; Sabir, Asrar Ahmed; Ghazali, Zulkipli; Nübling, Matthias

    2018-01-01

    Psychosocial risks are considered as a burning issue in the Asia-Pacific region. The aim of this study was to investigate the impact of psychosocial work environment factors on health of petrochemical industry workers of Malaysia. In lieu to job demands-resources theory, significant positive associations were found between quantitative demands, work-family conflict, and job insecurity with stress, while a significant negative association of role clarity as a resource factor with stress was de...

  5. Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI) in Virtual Environment

    OpenAIRE

    Erlinda Muslim; Boy Nurtjahyo; Romadhani Ardi

    2011-01-01

    This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics  study  using Posture Evaluation Index (PEI). PEI integrates  the scores of  low back analysi...

  6. National symposium: nuclear technique in industry, medicine, agriculture and environment protection. Abstracts of papers

    International Nuclear Information System (INIS)

    1995-01-01

    The National Symposium 'Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection' has been held in Rynia near Warsaw from 24 to 27 April 1995. Totally 94 lectures have been presented. The actual state of art in Polish investigations have been shown in all branches of applied nuclear sciences. The plenary session devoted to general topics has began the symposium. Further conference has been divided into 18 subject sessions. There were: 1) radiation technologies in environment protection; 2) radiation technologies in materials engineering; 3) radiation preservation in food; 4) radiation techniques for medical use; 5) radiotracers in industrial investigations; 6) radiotracers in water and sewage management and leak control; 7) tracers in hydrology; 8) radiotracers in materials testing; 9) instruments for environment protection, 10) radiometric industrial gages; 11) diagnostic and testing instruments; 12) application of nuclear techniques in materials testing; 13) applications of nuclear techniques in geology and hydrogeology; 14) radioanalytical methods; 15) radiation detectors; 16) radiation measurements; 17) data processing from radiometric experiments; 18) accelerators, isotopes manufacturing, INIS

  7. Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI in Virtual Environment

    Directory of Open Access Journals (Sweden)

    Erlinda Muslim

    2011-09-01

    Full Text Available This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics  study  using Posture Evaluation Index (PEI. PEI integrates  the scores of  low back analysis (LBA, ovako working  posture  (OWAS,  and  rapid  upper  limb assessment  (RULA.  Analysis  phase  was  done  using  digital  human model  in  virtual  environment  that  available  on  Jack  6.0.  The  results show  that  the  working  conditions  in  garment industry had enough amount of risk that can injured the musculoskeletal system of the workers. This research enriches the  body  of  ergonomics  knowledge  in Indonesia  because  it  is  the  first  research  in  Indonesia that  applied  virtual environment approach to ergonomics analysis in industry.

  8. Environment

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    IGT's efforts in environmental protection are primarily concerned with reducing the level of undesirable emissions from combustion, treating solid and liquid waste materials, and producing cleaner fuels. Projects being funded include: an ultra-low-emission gas-fired cyclonic burner for firetube boiler retrofit; a combination of IGT's de-NOX technology for municipal solid waste combustors with the injection of sorbents to reduce pollutants; second-generation NOx reduction techniques for regenerative glass melting furnaces; investigation of the applicability of electric DC field flame stabilization; development of a slagging cyclonic combustor for a class of industrial solid wastes; remediation research of various biological, chemical, and thermal technologies for cleaning and/or immobilizing contaminants in soils and sludges; and fuel cell research on molten carbonate and solid oxide fuel cells

  9. Une installation expérimentale pour l'étude du traitement par combustion des fumées industrielles An Experimental Plant for Processing Industrial Fumes by Combustion

    Directory of Open Access Journals (Sweden)

    Morillon R.

    2006-11-01

    Full Text Available Le rejet à l'atmosphère d'effluents gazeux d'origine industrielle entraîne un accroissement sensible de la pollution atmosphérique ; en outre, il s'accompagne souvent d'une perte d'énergie lorsque l'élément polluant est un hydrocarbure. Dans ce cas, l'utilisation du gaz naturel pour le traitement par combustion des fumées industrielles apporte une solution élégante et souvent peu coûteuse grâce à la récupération d'énergie qu'il est possible de faire. La première partie de l'article rappelle les aspects théoriques de ce traitement ; en particulier, l'influence des divers éléments sur son efficacité y est discutée (composition de l'atmosphère polluée, température, temps de séjour, etc.. II apparaît ainsi que diverses conditions doivent être remplies simultanément pour obtenir une efficacité satisfaisante. Afin de disposer d'éléments d'ingénierie permettant de construire les unités de traitement les plus efficaces et les plus sûres possible, au coût le plus bas possible, la Direction des études et techniques nouvelles du Gaz de France a réalisé une installation expérimentale qui est présentée dans la deuxième partie de l'article. Enfin, quelques examples d'utilisation de cette installation expérimentale, qui constitue un nouvel outil de travail mis à la disposition des utisitateurs et des constructeurs, sont décrits dans la troisième partie de l'article. The discharge into the atmosphere of industrial waste gases causes substantially increased air pollution. Moreover, it is often accompanied by loss of energy when the polluting element is a hydrocarbon. In such cases, the use of natural gas for processing industrial fumes by combustion provides an elegant solution, which moy often prove economical too becouse of the recovery of energy it makes possible. The first part of this article reviews the theoretical aspects of such processing. The way in which its effectiveness is affected by various parameters

  10. Optical Tomography in Combustion

    DEFF Research Database (Denmark)

    Evseev, Vadim

    spectral measurements at several line-of-sights with a view to applications for tomographic measurements on full-scale industrial combustion systems. The system was successfully applied on industrial scale for simultaneous fast exhaust gas temperature measurements in the three optical ports of the exhaust......D project, it was also important to investigate the spectral properties of major combustion species such as carbon dioxide and carbon monoxide in the infrared range at high temperatures to provide the theoretical background for the development of the optical tomography methods. The new software....... JQSRT 113 (2012) 2222, 10.1016/j.jqsrt.2012.07.015] included in the PhD thesis as an attachment. The knowledge and experience gained in the PhD project is the first important step towards introducing the advanced optical tomography methods of combustion diagnostics developed in the project to future...

  11. Corrosion products of reinforcement in concrete in marine and industrial environments

    International Nuclear Information System (INIS)

    Vera, R.; Villarroel, M.; Carvajal, A.M.; Vera, E.; Ortiz, C.

    2009-01-01

    The corrosion products formed on embedded steel in concrete under simulated marine and industrial conditions and natural marine environment were studied. A 0.50 water/cement ratio concrete was used and 3.5% NaCl and 180 g L -1 of H 2 SO 4 with 70 ppm of chloride ions solutions were used to simulate the synthetic medium. The initial electrochemical variables of the steel and pH, chlorides and sulfates profiles were measured according to the concrete depth. The morphology of the corrosive attack was determined via scanning electron microscopy (SEM), and the composition of the corrosion products was determined using an X-ray analyzer and an X-ray diffractometer (XRD). The protective power of the corrosion products was evaluated through anodic polarization curves in a saturated Ca(OH) 2 solution. The results from XRD and SEM show that all the resulting corrosion products correspond to lepidocrocite, goethite and magnetite mixtures; moreover, akaganeite was also identified under natural and simulated marine environments. Siderite was only detected in samples exposed to a natural marine environment. Concerning the protective nature of the corrosion products, these show lower performance in a simulated industrial environment, where the corrosion rate of the steel is up to 1.48 μm year -1

  12. Corrosion products of reinforcement in concrete in marine and industrial environments

    Energy Technology Data Exchange (ETDEWEB)

    Vera, R. [Instituto de Quimica, Facultad de Ciencias, Pontificia Universidad Catolica de Valparaiso, Avenida Brasil 2950, Casilla 4059, Valparaiso (Chile)], E-mail: rvera@ucv.cl; Villarroel, M. [Instituto de Quimica, Facultad de Ciencias, Pontificia Universidad Catolica de Valparaiso, Avenida Brasil 2950, Casilla 4059, Valparaiso (Chile); Carvajal, A.M. [Facultad de Ingenieria, Escuela de Construccion Civil, Pontificia Universidad Catolica de Chile, Av. Vicuna Mackenna 4860, Macul, Santiago (Chile); Vera, E.; Ortiz, C. [Universidad Pedagogica y Tecnologica de Colombia, Avenida Central Norte, Km 2, Tunja (Colombia)

    2009-03-15

    The corrosion products formed on embedded steel in concrete under simulated marine and industrial conditions and natural marine environment were studied. A 0.50 water/cement ratio concrete was used and 3.5% NaCl and 180 g L{sup -1} of H{sub 2}SO{sub 4} with 70 ppm of chloride ions solutions were used to simulate the synthetic medium. The initial electrochemical variables of the steel and pH, chlorides and sulfates profiles were measured according to the concrete depth. The morphology of the corrosive attack was determined via scanning electron microscopy (SEM), and the composition of the corrosion products was determined using an X-ray analyzer and an X-ray diffractometer (XRD). The protective power of the corrosion products was evaluated through anodic polarization curves in a saturated Ca(OH){sub 2} solution. The results from XRD and SEM show that all the resulting corrosion products correspond to lepidocrocite, goethite and magnetite mixtures; moreover, akaganeite was also identified under natural and simulated marine environments. Siderite was only detected in samples exposed to a natural marine environment. Concerning the protective nature of the corrosion products, these show lower performance in a simulated industrial environment, where the corrosion rate of the steel is up to 1.48 {mu}m year{sup -1}.

  13. Modeling the effects of involvement and attitudes on energy industry pursuit intentions: A systems analysis of the university-industry environment

    Science.gov (United States)

    Gross, Jordan M.

    The energy industry's struggle to attract and retain qualified employees continues to threaten the nation's economy, global competitiveness, and national security. Given the nationwide skills and labor shortage in the energy industry, this study was conducted in response to a need to identify causes of person-environment fit and its effects on engineering students' intentions to work in the energy industry after graduation. Structural equation modeling was used to examine the relationships between student inputs, environmental factors, and career-related outcomes. Two models were compared using data collected from 381 undergraduate engineering students from across the country. Results suggest that students who gained knowledge about professions in the energy industry from participating in an internship or co-op at an energy-related company perceived greater fit with the goals and values of the energy industry. In addition, this study found that students who perceive high levels of fit with the energy industry also have high industry attraction, which directly affects their energy industry pursuit intentions. Overall, this research indicates that high quality internships have the potential to increase students' perceived industry fit, which is closely tied to their career intentions. Outcomes of this study are expected to provide stakeholders with new insights to improve practices within the university-industry environment that will educate, promote, and sustain a strong energy workforce for years to come.

  14. [Response of the tobacco industry to the creation of smoke-free environments in Brazil].

    Science.gov (United States)

    Bialous, Stella Aguinaga; Presman, Sabrina; Gigliotti, Analice; Muggli, Monique; Hurt, Richard

    2010-04-01

    To document the response of the tobacco industry to the regulation of smoking in public places in Brazil starting in 1996. The Legacy Tobacco Documents Library (legacy.library.ucsf.edu/) and the British American Tobacco (BAT) Company Documents (bat.library.ucsf.edu/) were searched. The following key words were used: Brasil/Brazil; Souza Cruz; fumo passivo, tabagismo passivo/passive smoking; fumo de segunda mão/secondhand smoking; convivência em harmonia/courtesy of choice; along with the names of institutions, politicians, and individuals associated with tobacco control. We also searched the websites of cigarette manufacturers and hospitality industry organizations and businesses, news websites, and online newspapers and magazines. The search was limited to the period from 1995 to 2005. The text of the first law restricting smoking in Brazil (no. 9 294, of 1996) benefited the industry by stating that smokers and nonsmokers could share the same space provided that specific areas were designated as smoking and nonsmoking. As in other countries, the tobacco industry established partnerships with hotel, bar, and restaurant associations to prevent the passing of laws creating 100% smoke-free environments, as recommended by the World Health Organization. However, local state and city laws in major cities and states (such as Rio de Janeiro and São Paulo) have been successful in ensuring the creation of 100% smoke-free places. It is essential that Brazil recognize the damage caused by smoking and revise its federal law regulating smoking in closed environments. The knowledge concerning the strategies employed by the industry may be useful for politicians and health care professionals to prepare arguments opposing measures that can be detrimental to public health.

  15. Development of a Raman spectroscopy technique to detect alternate transportation fuel hydrocarbon intermediates in complex combustion environments.

    Energy Technology Data Exchange (ETDEWEB)

    Ekoto, Isaac W.; Barlow, Robert S.

    2012-12-01

    Spontaneous Raman spectra for important hydrocarbon fuels and combustion intermediates were recorded over a range of low-to-moderate flame temperatures using the multiscalar measurement facility located at Sandia/CA. Recorded spectra were extrapolated to higher flame temperatures and then converted into empirical spectral libraries that can readily be incorporated into existing post-processing analysis models that account for crosstalk from overlapping hydrocarbon channel signal. Performance testing of the developed libraries and reduction methods was conducted through an examination of results from well-characterized laminar reference flames, and was found to provide good agreement. The diagnostic development allows for temporally and spatially resolved flame measurements of speciated hydrocarbon concentrations whose parent is more chemically complex than methane. Such data are needed to validate increasingly complex flame simulations.

  16. Combustible dust tests

    Science.gov (United States)

    The sugar dust explosion in Georgia on February 7, 2008 killed 14 workers and injured many others (OSHA, 2009). As a consequence of this explosion, OSHA revised its Combustible Dust National Emphasis (NEP) program. The NEP targets 64 industries with more than 1,000 inspections and has found more tha...

  17. The Impact of the Bituminous Coal Combustion from the Thermoelectric Power Plant from Paroseni on the Environment of Jiu Valley

    OpenAIRE

    Mircea Rebrisoreanu; Eugen Traistă; Aronel Matei; Ovidiu Barbu; Vlad A. Codrea

    2002-01-01

    The Jiu Valley Basin is one of the most important coal mining areas in Romania. Other industries, including a power plant, are also well developed in this area. Therefore, pollution is very high. One of the most polluted environmental compounds is the air. High mountains surround the Jiu Valley, which makes difficult the air refreshing. For this reason, it is very important to discuss the air pollution and especially that produced by dust. Since the industrial companies are concentrated in a ...

  18. Optical Inspection In Hostile Industrial Environments: Single-Sensor VS. Imaging Methods

    Science.gov (United States)

    Cielo, P.; Dufour, M.; Sokalski, A.

    1988-11-01

    On-line and unsupervised industrial inspection for quality control and process monitoring is increasingly required in the modern automated factory. Optical techniques are particularly well suited to industrial inspection in hostile environments because of their noncontact nature, fast response time and imaging capabilities. Optical sensors can be used for remote inspection of high temperature products or otherwise inaccessible parts, provided they are in a line-of-sight relation with the sensor. Moreover, optical sensors are much easier to adapt to a variety of part shapes, position or orientation and conveyor speeds as compared to contact-based sensors. This is an important requirement in a flexible automation environment. A number of choices are possible in the design of optical inspection systems. General-purpose two-dimensional (2-D) or three-dimensional (3-D) imaging techniques have advanced very rapidly in the last years thanks to a substantial research effort as well as to the availability of increasingly powerful and affordable hardware and software. Imaging can be realized using 2-D arrays or simpler one-dimensional (1-D) line-array detectors. Alternatively, dedicated single-spot sensors require a smaller amount of data processing and often lead to robust sensors which are particularly appropriate to on-line operation in hostile industrial environments. Many specialists now feel that dedicated sensors or clusters of sensors are often more effective for specific industrial automation and control tasks, at least in the short run. This paper will discuss optomechanical and electro-optical choices with reference to the design of a number of on-line inspection sensors which have been recently developed at our institute. Case studies will include real-time surface roughness evaluation on polymer cables extruded at high speed, surface characterization of hot-rolled or galvanized-steel sheets, temperature evaluation and pinhole detection in aluminum foil, multi

  19. China's coke industry: Recent policies, technology shift, and implication for energy and the environment

    International Nuclear Information System (INIS)

    Huo, Hong; Lei, Yu; Zhang, Qiang; Zhao, Lijian; He, Kebin

    2012-01-01

    China is the largest coke producer in the world, accounting for over 60% of the world coke production, which makes the coke industry in China a significant coal consumer and air pollutant emitter. Recently, China has taken a series of measures to improve energy efficiency and reduce emissions from the coke industry, including eliminating old and low energy-efficiency coking technologies, promoting advanced technologies, and strengthening energy and environmental requirements on coking processes. As a consequence, China's coke industry is experiencing an unprecedented technology shift, which was characterized by the elimination of old, inefficient, and polluting indigenous ovens and small machinery ones within 10 years. This study examines the policies and the prompt technology shift in China's coke industry, as well as the associated energy and environmental effects, and discusses the implications with respect to the development of the coke industry in China towards a more efficient and clean future. As China sets stricter requirements on energy efficiency and the ambient environment, a more significant change focusing on technologies of energy saving and emission reduction is urgently needed at present. Those mature technologies, including coke dry quenching, coke oven gas recycle, fine particle removal, etc., should be enforced in the near future. - Highlights: ► With 60% of world coke output, China's coke making has big energy/pollution issues. ► Actions were taken to improve energy and environmental performance of coke plants. ► China's coke industry is experiencing an unprecedented technology shift. ► Another shift, focusing on technologies of energy and emission saving, is needed. ► More measurement studies on coking emissions are needed given the importance.

  20. Industrial Application of an Improved Multiple Injection and Multiple Staging Combustion Technology in a 600 MWe Supercritical Down-Fired Boiler.

    Science.gov (United States)

    Song, Minhang; Zeng, Lingyan; Chen, Zhichao; Li, Zhengqi; Zhu, Qunyi; Kuang, Min

    2016-02-02

    To solve the water wall overheating in lower furnace, and further reduce NOx emissions and carbon in fly ash, continuous improvement of the previously proposed multiple injection and multiple staging combustion (MIMSC) technology lies on three aspects: (1) along the furnace arch breadth, changing the previously centralized 12 burner groups into a more uniform pattern with 24 burners; (2) increasing the mass ratio of pulverized coal in fuel-rich flow to that in fuel-lean flow from 6:4 to 9:1; (3) reducing the arch-air momentum by 23% and increasing the tertiary-air momentum by 24%. Industrial-size measurements (i.e., adjusting overfire air (OFA) damper opening of 20-70%) uncovered that, compared with the prior MIMSC technology, the ignition distance of fuel-rich coal/air flow shortened by around 1 m. The gas temperature in the lower furnace was symmetric and higher, the flame kernel moved upward and therefore made the temperature in near-wall region of furnace hopper decrease by about 400 °C, the water wall overheating disappeared completely. Under the optimal OFA damper opening (i.e, 55%), NOx emissions and carbon in fly ash attained levels of 589 mg/m(3) at 6% O2 and 6.18%, respectively, achieving NOx and carbon in fly ash significant reduction by 33% and 37%, respectively.

  1. Fiber Bragg grating sensors in harsh environments: considerations and industrial monitoring applications

    Science.gov (United States)

    Méndez, Alexis

    2017-06-01

    Over the last few years, fiber optic sensors (FOS) have seen an increased acceptance and widespread use in industrial sensing and in structural monitoring in civil, aerospace, marine, oil & gas, composites and other applications. One of the most prevalent types in use today are fiber Bragg grating (FBG) sensors. Historically, FOS have been an attractive solution because of their EM immunity and suitability for use in harsh environments and rugged applications with extreme temperatures, radiation exposure, EM fields, high voltages, water contact, flammable atmospheres, or other hazards. FBG sensors have demonstrated that can operate reliably in many different harsh environment applications but proper type and fabrication process are needed, along with suitable packaging and installation procedure. In this paper, we review the impact that external factors and environmental conditions play on FBG's performance and reliability, and describe the appropriate sensor types and protection requirements suitable for a variety of harsh environment applications in industrial furnaces, cryogenic coolers, nuclear plants, maritime vessels, oil & gas wells, aerospace crafts, automobiles, and others.

  2. Modelling of an industrial environment, part 2.: External dose calculation with relevant countermeasures

    International Nuclear Information System (INIS)

    Eged, K.; Kis, Z.; Alvarez-Farizo, B.; Gil, J.; Voigt, G.

    2002-01-01

    The calculation of the collective dose and averted collective dose after applying countermeasures in an industrial environment has been divided in two parts. In the first part (Kis et al. 2002) separate Monte Carlo simulations of photon transport resulted in the air kermas per photon per unit area due to the industrial surfaces contaminated by 1 37C s at specific points using the so-called local approach. In the local approach the air kerma rates due to specific intervention elements at the evaluation locations in the whole environment are determined (Gutierrez et al. 2000). In this way the collective and averted collective dose due to the radiation from a particular intervention element (e.g. the roof of a building) can be obtained. It can, therefore, provide a ranking of the specific intervention elements based on their contribution to collective dose as well. The deposition pattern and the long-term behaviour of deposited radionuclides vary widely in natural circumstances; therefore the number of the photons emitted from the various surfaces per unit area and time can differ significantly. This means the results of the Monte Carlo simulations have to be weighted according to the number of emitted photons so that the actual radiation field can be set up. For this purpose, a dose calculation code has been developed in the framework of the TEMAS project (Gutierrez et al. 2000) which allows to calculate collective doses for different environments. This code has been applied in the present work

  3. Use of combustible wastes as fuel

    Energy Technology Data Exchange (ETDEWEB)

    Kotler, V.R.; Salamov, A.A.

    1983-01-01

    Achievements of science and technology in creating and using units for combustion of wastes with recovery of heat of the escaping gases has been systematized and generalized. Scales and outlooks are examined for the use of general, industrial and agricultural waste as fuel, composition of the waste, questions of planning and operating units for combustion of solid refuse, settling of waste water and industrial and agricultural waste. Questions are covered for preparing them for combustion use in special units with recovery of heat and at ES, aspects of environmental protection during combustion of waste, cost indicators of the employed methods of recovering the combustible waste.

  4. Nuclear industry strategic asset management: Managing nuclear assets in a competitive environment

    International Nuclear Information System (INIS)

    Mueller, H.; Hunt, E.W. Jr.; Oatman, E.N.

    1999-01-01

    The former Electric Power Research Institute took the lead in developing an approach now widely known as strategic asset management (SAM). The SAM methodology applies the tools of decision/risk analysis used in the financial community to clarify effective use of physical assets and resources to create value: to build a clear line of sight to value creation. SAM processes have been used in both the power and other industries. The rapid change taking place in the nuclear business creates the need for competitive decision making regarding the management of nuclear assets. The nuclear industry is moving into an era in which shareholder value is determined by the net revenues earned on power marketed in a highly competitive and frequently low-priced power market environment

  5. Seed production of woody plants in conditions of environment pollution by metallurgical industry emissions

    Directory of Open Access Journals (Sweden)

    Z. V. Gritzay

    2011-10-01

    Full Text Available The influence of environment pollution by metallurgical industry emissions on woody plants bearing parameters was examined. The results obtained show the decrease of bearing rate, diminution of seeds, fruits and seed cells sizes in woody plants affected by technogenic emissions. Attenuation of the 1000 seeds’ weight was established. Incresing the amount of fruits with development deviations was ascertained. It was found aplasia and abnormal form of the samara fruit of ash and ailanthus trees, arcuation and narrowing of some parts of the catalpa fruitcases. Practical recommendations on using seeds’ sensitive parameters in biomonitoring of woody phytocenoses under technogenic stressful conditions are proposed.

  6. Fire prevention in industrial installations presenting a risk for man and environment (ICPE)

    International Nuclear Information System (INIS)

    Moche, L.

    2000-01-01

    The most likely accident in industrial installations is fire. 59 out of 100 accidents reported in 1999 describe a fire outbreak, the fire is either the initiating cause of the accident or the form into which the event eventually evolves. This article briefly describes the why and the wherefore of French regulations on fire prevention in installations presenting a risk for man and environment. The French system is based on the responsibility of the plant operator and on the result of inspections performed by authorities to check the conformity of the installation with current regulations. (A.C.)

  7. The need for integrated pollution prevention control of the environment concerning industrial and power plants

    International Nuclear Information System (INIS)

    Trpevska T, Magdalena; Kostova, Brankitsa

    2008-01-01

    Within the Low on the Environment, Regulations of the Directive 96/61/Eu regarding Integrated Pollution Prevention Control are implemented. The Low significantly changes the manner of industrial plants operation in reference to environmental protection. The study presents description of the system for Integrated Pollution Prevention Control, list of production branches to which this system refers, and as well as experiences of Tehnolab Ltd, Skopje - expert consulting company, concerning preparation of A and B Integrated Environmental Permits for several installation from R. Macedonia.(Author)

  8. Optimal thermionic energy conversion with established electrodes for high-temperature topping and process heating. [coal combustion product environments

    Science.gov (United States)

    Morris, J. F.

    1980-01-01

    Applied research-and-technology (ART) work reveals that optimal thermionic energy conversion (TEC) with approximately 1000 K to approximately 1100 K collectors is possible using well established tungsten electrodes. Such TEC with 1800 K emitters could approach 26.6% efficiency at 27.4 W/sq cm with approximately 1000 K collectors and 21.7% at 22.6 W/sq cm with approximately 1100 K collectors. These performances require 1.5 and 1.7 eV collector work functions (not the 1 eV ultimate) with nearly negligible interelectrode losses. Such collectors correspond to tungsten electrode systems in approximately 0.9 to approximately 6 torr cesium pressures with 1600 K to 1900 K emitters. Because higher heat-rejection temperatures for TEC allow greater collector work functions, interelectrode loss reduction becomes an increasingly important target for applications aimed at elevated temperatures. Studies of intragap modifications and new electrodes that will allow better electron emission and collection with lower cesium pressures are among the TEC-ART approaches to reduced interelectrode losses. These solutions will provide very effective TEC to serve directly in coal-combustion products for high-temperature topping and process heating. In turn this will help to use coal and to use it well.

  9. Evaluation of the degradation of a zinc coating exposed to a damp industrial environment

    International Nuclear Information System (INIS)

    Naquid G, C.; Ayala R, V.

    2001-01-01

    The purpose of this work is to characterize and identify the degradation mechanism of a galvanized coating exposed to a dry arid industrial environment, but this one with events of high humidity (rains) and contaminated with copper salts. It was demonstrated that the atmospheric corrosion was accelerated by the presence of copper deposits and sulfur over the samples surface. Likewise it was tried to correlate the contact time (staying time) between the coating and the contaminated environment, the p H value (acid media) and the presence of salts (copper sulfates) in solution, with the deterioration grade of the galvanized coating. The analytical techniques applied in the study were: optical microscopy, scanning electron microscopy, X-ray diffraction and chemical analysis by X-ray dispersive energy spectroscopy. (Author)

  10. Healthy environment--indoor air quality of Brazilian elementary schools nearby petrochemical industry.

    Science.gov (United States)

    Godoi, Ricardo H M; Godoi, Ana F L; Gonçalves Junior, Sérgio J; Paralovo, Sarah L; Borillo, Guilherme C; Gonçalves Gregório Barbosa, Cybelli; Arantes, Manoela G; Charello, Renata C; Rosário Filho, Nelson A; Grassi, Marco T; Yamamoto, Carlos I; Potgieter-Vermaak, Sanja; Rotondo, Giuliana G; De Wael, Karolien; van Grieken, Rene

    2013-10-01

    The mitigation of pollution released to the environment originating from the industrial sector has been the aim of all policy-makers and its importance is evident if the adverse health effects on the world population are considered. Although this concern is controversial, petroleum refinery has been linked to some adverse health effects for people living nearby. Apart from home, school is the most important indoor environment for children and there is increasing concern about the school environment and its impact on health, also in developing countries where the prevalence of pollution is higher. As most of the children spend more than 40% of their time in schools, it is critical to evaluate the pollution level in such environment. In the metropolitan region of Curitiba, South Brazil, five schools nearby industries and highways with high density traffic, were selected to characterize the aerosol and gaseous compounds indoor and outdoor of the classrooms, during 2009-2011. Size segregated aerosol samples were collected for analyses of bulk and single particle elemental profiles. They were analyzed by electron probe X-ray micro-analysis (EPXMA), and by energy-dispersive X-ray fluorescence (EDXRF), to investigate the elemental composition of individual particles and bulk samples. The concentrations of benzene, toluene, ethylbenzene, and xylene (BTEX); NO2; SO2; acetic acid; and formic acid were assessed indoor and outdoor using passive diffusion tubes. BTEX were analyzed by GC-MS and other collected gasses by ion chromatography. Individual exposition of BTEX was assessed by personal passive diffusion tubes. Results are interpreted separately and as a whole with the specific aim of identifying compounds that could affect the health of the scholars. In view of the chemical composition and size distribution of the aerosol particles, local deposition efficiencies in the children's respiratory systems were calculated, revealing the deposition of particles at extrathoracic

  11. Radionuclides in the environment in the south of Spain, anthropogenic enhancements due to industry

    Energy Technology Data Exchange (ETDEWEB)

    Manjon, G. [Depto. de Fisica Aplicada 2, E.T.S. Arquitectura, Universidad de Sevilla, Av. Reina Mercedes 2, 41012 - Sevilla (Spain)

    2007-07-01

    Levels of natural radionuclides in the environment are affected by human activities in the South of Spain. Industry wastes, such as phospho-gypsum, have been released to an estuary since sixties until 1997. Nowadays the wastes management is careful with environment protection, which can be clearly observed today in the radionuclides pattern. Different sources of radionuclides (industry wastes, tidal action and mining) can be distinguished in the estuary. Uranium isotopes, {sup 226}Ra, {sup 210}Pb and {sup 210}Po were determined in water and sediment samples for this study. An iron recycling factory is working close to Seville (South of Spain). A {sup 137}Cs source was accidentally burnt in a furnace of this factory in 2001. The environmental impact of this accident was immediately denatured. Monitoring procedure and results are sho vn in this contribution. Radionuclides measurement involves difficult techniques. In this communication a procedure to determine the activity concentration of {sup 210}Pb by liquid scintillation counting is presented. Two quality tests, using gamma- and alpha-spectrometry were applied to the {sup 210} Pb results. (Author)

  12. Radionuclides in the environment in the south of Spain, anthropogenic enhancements due to industry

    International Nuclear Information System (INIS)

    Manjon, G.

    2007-01-01

    Levels of natural radionuclides in the environment are affected by human activities in the South of Spain. Industry wastes, such as phospho-gypsum, have been released to an estuary since sixties until 1997. Nowadays the wastes management is careful with environment protection, which can be clearly observed today in the radionuclides pattern. Different sources of radionuclides (industry wastes, tidal action and mining) can be distinguished in the estuary. Uranium isotopes, 226 Ra, 210 Pb and 210 Po were determined in water and sediment samples for this study. An iron recycling factory is working close to Seville (South of Spain). A 137 Cs source was accidentally burnt in a furnace of this factory in 2001. The environmental impact of this accident was immediately denatured. Monitoring procedure and results are sho vn in this contribution. Radionuclides measurement involves difficult techniques. In this communication a procedure to determine the activity concentration of 210 Pb by liquid scintillation counting is presented. Two quality tests, using gamma- and alpha-spectrometry were applied to the 210 Pb results. (Author)

  13. "The world's most hostile environment": how the tobacco industry circumvented Singapore's advertising ban.

    Science.gov (United States)

    Assunta, M; Chapman, S

    2004-12-01

    To review how tobacco transnational companies conducted their business in the hostile environment of Singapore, attempting to counter some of the government's tobacco control measures; to compare the Malaysian and the Singaporean governments' stance on tobacco control and the direct bearing of this on the way the tobacco companies conduct their business. Systematic keyword and opportunistic website searches of formerly private internal industry documents. The comprehensive prohibition on advertising did not prevent the companies from advertising cigarettes to Singaporeans. Both British American Tobacco and Philip Morris used Malaysian television to advertise into Singapore. To launch a new brand of cigarettes, Alpine, Philip Morris used a non-tobacco product, the Alpine wine cooler. Other creative strategies such as innovative packaging and display units at retailers were explored to overcome the restrictions. Philip Morris experimented with developing a prototype cigarette using aroma and sweetened tipping paper to target the young and health conscious. The industry sought to weaken the strong pack warnings. The industry distributed anti-smoking posters for youth to retailers but privately salivated over their market potential.

  14. Influence of the atomic industry branches' on the Kazakhstan environment status

    International Nuclear Information System (INIS)

    Ibraev, R.; Tugel'baev, S.S.

    2001-01-01

    In the paper an the atomic industry branches' influence on the Kazakhstan environment status is considered. It is noted that Kazakhstan in only country in the world where nuclear strategic programs (USSR and CIS) were carried out without control, any limits, wide-scaly and in a full cycle. This is mine, reprocessing of strategic ores, preparation (partial), testing and use of nuclear and thermonuclear warheads in both military and peaceful aims, radioactive wastes disposal. Due to non-observance by industry branches of the principal normative requirements of radiation safety (were in existence and present ones) in the republic there is not territorial delimitation of the special objects with control area that caused negative influence of these objected were exposed vast regions both out-side and inter-sites area. So Kazakhstan nature scale-wide contamination is the existing reality. It is stressed, that mining and reprocessing uranium enterprises have negative contribution in the bio-geo-media. In this case it is especially hazard the underground sulfuric leaching technology is applying in the uranium mine industry. The technology is much cheaper but it ecologically in dozen times danger in comparison with applied in other countries the carbonate leaching method

  15. The Impact of the Bituminous Coal Combustion from the Thermoelectric Power Plant from Paroseni on the Environment of Jiu Valley

    Directory of Open Access Journals (Sweden)

    Mircea Rebrisoreanu

    2002-04-01

    Full Text Available The Jiu Valley Basin is one of the most important coal mining areas in Romania. Other industries, including a power plant, are also well developed in this area. Therefore, pollution is very high. One of the most polluted environmental compounds is the air. High mountains surround the Jiu Valley, which makes difficult the air refreshing. For this reason, it is very important to discuss the air pollution and especially that produced by dust. Since the industrial companies are concentrated in a small area, it is very difficult to identify and prosecute the polluting one. The present paper aims to identify the sources of air pollution, especially among the mining companies, because the power plant is considered the most important polluting agent in this area.

  16. Energetic retrofitting of industrial heat supply systems. Possibilities of enhancing the efficiency and energy conservation at large combustion engineering plants; Energetische Modernisierung industrieller Waermeversorgungssysteme. Moeglichkeiten der Effizienzsteigerung und der Energieeinsparung an grossen feuerungstechnischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-12-15

    In the contribution under consideration, the Deutsche Energie-Agentur GmbH (Berlin, Federal Republic of Germany) reports on an energetic modernization of industrial heat supply systems. Possibilities of an enhancement of the energetic efficiency and energy conservation at large combustion engineering plants are described. After an introduction to this theme, the author of this contribution provides an overview of the optimization of heat supply systems, and reports on the following aspects: Optimisation of the heat demand; energy efficient heat generation; heat recovery; energy efficient conversion technology and generation technology; associate partners for more energy efficiency in industry and commerce; best practice examples.

  17. Industrial safety in a nuclear decommissioning environment observations and lessons learned

    International Nuclear Information System (INIS)

    Brevig, D.

    2008-01-01

    Decommissioning activities present unusual and unexpected workplace safety challenges that go far beyond the traditional experience of nuclear power plant managers. A blend of state-of-the-art safety program management tools along with new and practical applications are required to ensure high industrial safety performance. The demanding and rigorously applied nuclear safety engineering standards that are accepted as normal and routine in the operation of a nuclear power facility, should transform as an industrial safety standard during the non-operating period of decommissioning. In addition, historical measures of non-nuclear industrial safety injury rates would or should not be acceptable safety behaviors during a nuclear decommissioning project. When complex projects, such as the decommissioning of a nuclear generating facility are undertaken, the workforce brings experience, qualifications, and assumptions to the project. The overall multi-year general schedule is developed, with more schedule details, for example, for the nearest rolling 12-18 months. Methods are established for the selection of contractors to assist in areas that are not normal tasks for the facility workforce, whose normal activity is managing and operating a nuclear generating station. However, it is critical to manage those contractors to the agreed work scope to ensure success is maintained by both parties, e.g. the job gets done, on schedule, on budget, all parties are financially whole when the work is complete, and safely. The purpose of this paper is to provide a perspective of nuclear plant personal safety in the ever changing industrial environment created by the demolition of robust and often radiologically contaminated structures in a nuclear facility decommissioning project. (author)

  18. Industrial safety in a nuclear decommissioning environment observations and lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Brevig, D. [Independent Consultant, San Clemente (United States)

    2008-07-01

    Decommissioning activities present unusual and unexpected workplace safety challenges that go far beyond the traditional experience of nuclear power plant managers. A blend of state-of-the-art safety program management tools along with new and practical applications are required to ensure high industrial safety performance. The demanding and rigorously applied nuclear safety engineering standards that are accepted as normal and routine in the operation of a nuclear power facility, should transform as an industrial safety standard during the non-operating period of decommissioning. In addition, historical measures of non-nuclear industrial safety injury rates would or should not be acceptable safety behaviors during a nuclear decommissioning project. When complex projects, such as the decommissioning of a nuclear generating facility are undertaken, the workforce brings experience, qualifications, and assumptions to the project. The overall multi-year general schedule is developed, with more schedule details, for example, for the nearest rolling 12-18 months. Methods are established for the selection of contractors to assist in areas that are not normal tasks for the facility workforce, whose normal activity is managing and operating a nuclear generating station. However, it is critical to manage those contractors to the agreed work scope to ensure success is maintained by both parties, e.g. the job gets done, on schedule, on budget, all parties are financially whole when the work is complete, and safely. The purpose of this paper is to provide a perspective of nuclear plant personal safety in the ever changing industrial environment created by the demolition of robust and often radiologically contaminated structures in a nuclear facility decommissioning project. (author)

  19. Seasonal variability of PM2.5 composition and sources in the Klang Valley urban-industrial environment

    Science.gov (United States)

    Amil, Norhaniza; Talib Latif, Mohd; Firoz Khan, Md; Mohamad, Maznorizan

    2016-04-01

    This study investigates the fine particulate matter (PM2.5) variability in the Klang Valley urban-industrial environment. In total, 94 daily PM2.5 samples were collected during a 1-year campaign from August 2011 to July 2012. This is the first paper on PM2.5 mass, chemical composition and sources in the tropical environment of Southeast Asia, covering all four seasons (distinguished by the wind flow patterns) including haze events. The samples were analysed for various inorganic components and black carbon (BC). The chemical compositions were statistically analysed and the temporal aerosol pattern (seasonal) was characterised using descriptive analysis, correlation matrices, enrichment factor (EF), stoichiometric analysis and chemical mass closure (CMC). For source apportionment purposes, a combination of positive matrix factorisation (PMF) and multi-linear regression (MLR) was employed. Further, meteorological-gaseous parameters were incorporated into each analysis for improved assessment. In addition, secondary data of total suspended particulate (TSP) and coarse particulate matter (PM10) sampled at the same location and time with this study (collected by Malaysian Meteorological Department) were used for PM ratio assessment. The results showed that PM2.5 mass averaged at 28 ± 18 µg m-3, 2.8-fold higher than the World Health Organisation (WHO) annual guideline. On a daily basis, the PM2.5 mass ranged between 6 and 118 µg m-3 with the daily WHO guideline exceeded 43 % of the time. The north-east (NE) monsoon was the only season with less than 50 % sample exceedance of the daily WHO guideline. On an annual scale, PM2.5 mass correlated positively with temperature (T) and wind speed (WS) but negatively with relative humidity (RH). With the exception of NOx, the gases analysed (CO, NO2, NO and SO2) were found to significantly influence the PM2.5 mass. Seasonal variability unexpectedly showed that rainfall, WS and wind direction (WD) did not significantly correlate

  20. Healthy environment — indoor air quality of Brazilian elementary schools nearby petrochemical industry

    International Nuclear Information System (INIS)

    Godoi, Ricardo H.M.; Godoi, Ana F.L.; Gonçalves Junior, Sérgio J.; Paralovo, Sarah L.; Borillo, Guilherme C.; Gonçalves Gregório Barbosa, Cybelli; Arantes, Manoela G.; Charello, Renata C.; Rosário Filho, Nelson A.; Grassi, Marco T.; Yamamoto, Carlos I.; Potgieter-Vermaak, Sanja; Rotondo, Giuliana G.; De Wael, Karolien; Grieken, Rene van

    2013-01-01

    The mitigation of pollution released to the environment originating from the industrial sector has been the aim of all policy-makers and its importance is evident if the adverse health effects on the world population are considered. Although this concern is controversial, petroleum refinery has been linked to some adverse health effects for people living nearby. Apart from home, school is the most important indoor environment for children and there is increasing concern about the school environment and its impact on health, also in developing countries where the prevalence of pollution is higher. As most of the children spend more than 40% of their time in schools, it is critical to evaluate the pollution level in such environment. In the metropolitan region of Curitiba, South Brazil, five schools nearby industries and highways with high density traffic, were selected to characterize the aerosol and gaseous compounds indoor and outdoor of the classrooms, during 2009–2011. Size segregated aerosol samples were collected for analyses of bulk and single particle elemental profiles. They were analyzed by electron probe X-ray micro-analysis (EPXMA), and by energy-dispersive X-ray fluorescence (EDXRF), to investigate the elemental composition of individual particles and bulk samples. The concentrations of benzene, toluene, ethylbenzene, and xylene (BTEX); NO 2 ; SO 2 ; acetic acid; and formic acid were assessed indoor and outdoor using passive diffusion tubes. BTEX were analyzed by GC–MS and other collected gasses by ion chromatography. Individual exposition of BTEX was assessed by personal passive diffusion tubes. Results are interpreted separately and as a whole with the specific aim of identifying compounds that could affect the health of the scholars. In view of the chemical composition and size distribution of the aerosol particles, local deposition efficiencies in the children's respiratory systems were calculated, revealing the deposition of particles at

  1. Healthy environment — indoor air quality of Brazilian elementary schools nearby petrochemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Godoi, Ricardo H.M., E-mail: rhmgodoi@ufpr.br [Department of Environmental Engineering, Federal University of Paran UFPR, Curitiba, PR (Brazil); Godoi, Ana F.L.; Gonçalves Junior, Sérgio J.; Paralovo, Sarah L.; Borillo, Guilherme C.; Gonçalves Gregório Barbosa, Cybelli; Arantes, Manoela G.; Charello, Renata C. [Department of Environmental Engineering, Federal University of Paran UFPR, Curitiba, PR (Brazil); Rosário Filho, Nelson A. [Department of Pediatric, Div. of Allergy and Pneumol, Federal University of Paran Curitiba, PR (Brazil); Grassi, Marco T. [Department of Chemistry, Federal University of Paraná, Curitiba, PR (Brazil); Yamamoto, Carlos I. [Department of Chemistry Engineering, Federal University of Paraná, Curitiba, PR (Brazil); Potgieter-Vermaak, Sanja [Division of Chemistry and Environmental Science, School of Science and the Environment, Manchester Metropolitan University, Manchester (United Kingdom); Rotondo, Giuliana G.; De Wael, Karolien; Grieken, Rene van [Department of Chemistry, University of Antwerp, Universiteitsplein 1, B-2610 Antwerp (Belgium)

    2013-10-01

    The mitigation of pollution released to the environment originating from the industrial sector has been the aim of all policy-makers and its importance is evident if the adverse health effects on the world population are considered. Although this concern is controversial, petroleum refinery has been linked to some adverse health effects for people living nearby. Apart from home, school is the most important indoor environment for children and there is increasing concern about the school environment and its impact on health, also in developing countries where the prevalence of pollution is higher. As most of the children spend more than 40% of their time in schools, it is critical to evaluate the pollution level in such environment. In the metropolitan region of Curitiba, South Brazil, five schools nearby industries and highways with high density traffic, were selected to characterize the aerosol and gaseous compounds indoor and outdoor of the classrooms, during 2009–2011. Size segregated aerosol samples were collected for analyses of bulk and single particle elemental profiles. They were analyzed by electron probe X-ray micro-analysis (EPXMA), and by energy-dispersive X-ray fluorescence (EDXRF), to investigate the elemental composition of individual particles and bulk samples. The concentrations of benzene, toluene, ethylbenzene, and xylene (BTEX); NO{sub 2}; SO{sub 2}; acetic acid; and formic acid were assessed indoor and outdoor using passive diffusion tubes. BTEX were analyzed by GC–MS and other collected gasses by ion chromatography. Individual exposition of BTEX was assessed by personal passive diffusion tubes. Results are interpreted separately and as a whole with the specific aim of identifying compounds that could affect the health of the scholars. In view of the chemical composition and size distribution of the aerosol particles, local deposition efficiencies in the children's respiratory systems were calculated, revealing the deposition of

  2. Industrial water pollution, water environment treatment, and health risks in China.

    Science.gov (United States)

    Wang, Qing; Yang, Zhiming

    2016-11-01

    The negative health effects of water pollution remain a major source of morbidity and mortality in China. The Chinese government is making great efforts to strengthen water environment treatment; however, no studies have evaluated the effects of water treatment on human health by water pollution in China. This study evaluated the association between water pollution and health outcomes, and determined the extent to which environmental regulations on water pollution may lead to health benefits. Data were extracted from the 2011 and 2013 China Health and Retirement Longitudinal Study (CHARLS). Random effects model and random effects Logit model were applied to study the relationship between health and water pollution, while a Mediator model was used to estimate the effects of environmental water treatment on health outcomes by the intensity of water pollution. Unsurprisingly, water pollution was negatively associated with health outcomes, and the common pollutants in industrial wastewater had differential impacts on health outcomes. The effects were stronger for low-income respondents. Water environment treatment led to improved health outcomes among Chinese people. Reduced water pollution mediated the associations between water environment treatment and health outcomes. The results of this study offer compelling evidence to support treatment of water pollution in China. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. The analysis of mechanical integrity in gas turbine engines subjected to combustion instabilities

    NARCIS (Netherlands)

    Altunlu, A.C.

    2013-01-01

    Stringent regulations have been introduced towards reducing pollutant emissions and preserving our environment. Lowering NOx emissions is one of the main targets of industrial gas turbine engines for power generation. The combustion zone temperature is one of the critical parameters, which is

  4. Development of flameless combustion; Desarrollo de la combustion sin flama

    Energy Technology Data Exchange (ETDEWEB)

    Flores Sauceda, M. Leonardo; Cervantes de Gortari, Jaime Gonzalo [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)]. E-mail: 8344afc@prodigy.net.mx; jgonzalo@servidor.unam.mx

    2010-11-15

    The paper intends contribute to global warming mitigation joint effort that develops technologies to capture the CO{sub 2} produced by fossil fuels combustion and to reduce emission of other greenhouse gases like the NO{sub x}. After reviewing existing combustion bibliography is pointed out that (a) touches only partial aspects of the collective system composed by Combustion-Heat transfer process-Environment, whose interactions are our primary interest and (b) most specialists think there is not yet a clearly winning technology for CO{sub 2} capture and storage. In this paper the study of combustion is focused as integrated in the aforementioned collective system where application of flameless combustion, using oxidant preheated in heat regenerators and fluent gas recirculation into combustion chamber plus appropriated heat and mass balances, simultaneously results in energy saving and environmental impact reduction. [Spanish] El trabajo pretende contribuir al esfuerzo conjunto de mitigacion del calentamiento global que aporta tecnologias para capturar el CO{sub 2} producido por la combustion de combustibles fosiles y para disminuir la emision de otros gases invernadero como NOx. De revision bibliografica sobre combustion se concluye que (a) trata aspectos parciales del sistema compuesto por combustion-proceso de trasferencia de calor-ambiente, cuyas interacciones son nuestro principal interes (b) la mayoria de especialistas considera no hay todavia una tecnologia claramente superior a las demas para captura y almacenaje de CO{sub 2}. Se estudia la combustion como parte integrante del mencionado sistema conjunto, donde la aplicacion de combustion sin flama, empleando oxidante precalentado mediante regeneradores de calor y recirculacion de gases efluentes ademas de los balances de masa y energia adecuados, permite tener simultaneamente ahorros energeticos e impacto ambiental reducido.

  5. Study of the Barada river environment pollution with poisonous trace elements resulting from tanning and electroplating industry

    International Nuclear Information System (INIS)

    Khamis, I.; Sarheel, A.; Al-Somel, N.; Al-Masri, M. S.

    2001-01-01

    Investigation of leather industry impact on Barada river environment, specifically in the eastern part of Damascus was made. Differential samples such as sediments, soil, and plantations from various locations were collected. results show high increase of chromium in river's sediment and soil adjacent to the river banks. However, such increase was not noticed in plantations or tree leaves. Copper and nickel concentrations were also high in sediments due to waste coming out of the electroplating industry. Concentration of titanium, one of the polishing and coloring industry's wastes, was noticed to be rather high too. Concentration of all previous pollutants was noticed to decrease as the distance become farther from the industrial complex. (Author)

  6. Industry

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.

    2001-01-01

    This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

  7. The contamination of an environment with wastes from energy production industry

    International Nuclear Information System (INIS)

    Agaev, T.D.; Nadirov, Z.A.; Amiraslanov, K.D.

    2004-01-01

    Full text : At present thermal power stations give 90 percent of all produced electric power in Azerbaijan. As a result of this the given industry consumes a large amount of organic fuel which have hydrogen and carbon in its content and as a result of this during burning of these components a big amount of harmful gaseous and liquid waste products is formed disposable to an atmosphere and to the ground. That is why gradual environmental contamination happen. Carrying out of measures on prevention of environment pollution is necessary in the fields of functioning these stations. There are also some statistical data on various parameters of described manufacture for various years is given [ru

  8. A SOA-Based Embedded Systems Development Environment for Industrial Automation

    Directory of Open Access Journals (Sweden)

    Thramboulidis KC

    2008-01-01

    Full Text Available Abstract Currently available toolsets for the development of embedded systems adopt traditional architectural styles and do not cover the whole requirements of the development process, with extensibility being the major drawback. In this paper, a service-oriented architectural framework that exploits semantic web is defined. Features required in the development process are defined as web services and published into the public domain, so as to be used on demand by developers to construct their projects' specific integrated development environments (IDEs. The infrastructure required to build a web service-based IDE is presented. Specific web services are defined and the way these services affect the development process is discussed. Special focus is given on the device model and the means that such a modelling can significantly improve the development process. A prototype implementation demonstrates the applicability and usefulness of the proposed demand-led development process in the industrial automation domain.

  9. New directions in virtual environments and gaming to address obesity and diabetes: industry perspective.

    Science.gov (United States)

    Ruppert, Barb

    2011-03-01

    Virtual reality is increasingly used for education and treatment in the fields of health and medicine. What is the health potential of virtual reality technology from the software development industry perspective? This article presents interviews with Ben Sawyer of Games for Health, Dr. Walter Greenleaf of InWorld Solutions, and Dr. Ernie Medina of MedPlay Technologies. Games for Health brings together researchers, medical professionals, and game developers to share information on the impact that game technologies can have on health, health care, and policy. InWorld is an Internet-based virtual environment designed specifically for behavioral health care. MedPlay Technologies develops wellness training programs that include exergaming technology. The interviewees share their views on software development and other issues that must be addressed to advance the field of virtual reality for health applications. © 2011 Diabetes Technology Society.

  10. Optimization of liquid scintillation measurements applied to smears and aqueous samples collected in industrial environments

    Directory of Open Access Journals (Sweden)

    Arnaud Chapon

    Full Text Available Search for low-energy β contaminations in industrial environments requires using Liquid Scintillation Counting. This indirect measurement method supposes a fine control from sampling to measurement itself. Thus, in this paper, we focus on the definition of a measurement method, as generic as possible, for both smears and aqueous samples’ characterization. That includes choice of consumables, sampling methods, optimization of counting parameters and definition of energy windows, using the maximization of a Figure of Merit. Detection limits are then calculated considering these optimized parameters. For this purpose, we used PerkinElmer Tri-Carb counters. Nevertheless, except those relative to some parameters specific to PerkinElmer, most of the results presented here can be extended to other counters. Keywords: Liquid Scintillation Counting (LSC, PerkinElmer, Tri-Carb, Smear, Swipe

  11. A hybrid multiple attribute decision making method for solving problems of industrial environment

    Directory of Open Access Journals (Sweden)

    Dinesh Singh

    2011-01-01

    Full Text Available The selection of appropriate alternative in the industrial environment is an important but, at the same time, a complex and difficult problem because of the availability of a wide range of alternatives and similarity among them. Therefore, there is a need for simple, systematic, and logical methods or mathematical tools to guide decision makers in considering a number of selection attributes and their interrelations. In this paper, a hybrid decision making method of graph theory and matrix approach (GTMA and analytical hierarchy process (AHP is proposed. Three examples are presented to illustrate the potential of the proposed GTMA-AHP method and the results are compared with the results obtained using other decision making methods.

  12. Management of ''short-lifetime'' radioactive wastes, an industrial reality to safeguard the environment

    International Nuclear Information System (INIS)

    Faussat, A.

    1992-01-01

    On the occasion of the inauguration of the Aube waste storage center by A.Billardon, Vice Minister for Energy, the author reviews the management situation in France for short life radioactive wastes. The wastes are first defined and their characteristics explained, and then are discussed the general principles underlying the management of these wastes, which involves finding ways to avoid the dispersal of radioactive products into the environment. The author explains why the French have chosen surface storage, and then goes into the integrated management system developed to optimize the long-term management of short-term wastes on the technical and economic levels. The two storage centers existing in France (the Manche and Aube centers) are then described. The article winds up with a presentation of the system as it has been adapted abroad, and another possible adaptation for use in storing toxic industrial wastes. 2 figs., 3 photos

  13. A SOA-Based Embedded Systems Development Environment for Industrial Automation

    Directory of Open Access Journals (Sweden)

    G. Doukas

    2007-10-01

    Full Text Available Currently available toolsets for the development of embedded systems adopt traditional architectural styles and do not cover the whole requirements of the development process, with extensibility being the major drawback. In this paper, a service-oriented architectural framework that exploits semantic web is defined. Features required in the development process are defined as web services and published into the public domain, so as to be used on demand by developers to construct their projects' specific integrated development environments (IDEs. The infrastructure required to build a web service-based IDE is presented. Specific web services are defined and the way these services affect the development process is discussed. Special focus is given on the device model and the means that such a modelling can significantly improve the development process. A prototype implementation demonstrates the applicability and usefulness of the proposed demand-led development process in the industrial automation domain.

  14. Prevalence and Molecular Characteristics of Waterborne Pathogen Legionella in Industrial Cooling Tower Environments.

    Science.gov (United States)

    Li, Lijie; Qin, Tian; Li, Yun; Zhou, Haijian; Song, Hongmei; Ren, Hongyu; Li, Liping; Li, Yongguang; Zhao, Dong

    2015-10-12

    Cooling towers are a source of Legionnaires' disease. It is important from a public health perspective to survey industrial cooling towers for the presence of Legionella. Prospective surveillance of the extent of Legionella pollution was conducted at factories in Shijiazhuang, China between March 2011 and September 2012. Overall, 35.7% of 255 industrial cooling tower water samples showed Legionella-positive, and their concentrations ranged from 100 Colony-Forming Units (CFU)/liter to 88,000 CFU/liter, with an average concentration of 9100 CFU/liter. A total of 121 isolates were obtained. All isolates were L. pneumophila, and the isolated serogroups included serogroups 1 (68 isolates, 56.2%), 6 (25, 20.7%), 5 (12, 9.9%), 8 (8, 6.6%), 3 (6, 5.0%) and 9 (2, 1.6%). All 121 isolates were analyzed by pulsed-field gel electrophoresis (PFGE) and 64 different patterns were obtained. All 121 isolates were analyzed sequence-based typing (SBT), a full 7-allele profile was obtained from 117 isolates. One hundred and seventeen isolates were divided into 49 sequence types. Two virulence genes, lvh and rtxA, are analyzed by polymerase chain reaction (PCR). 92.6% (112/121) and 98.3% (119/121) isolates carried lvh and rtxA respectively and 90.9% (110/121) of tested isolates carried both genes. Our results demonstrated high prevalence and genetic polymorphism of L. pneumophila in industrial cooling tower environments in Shijiazhang, China, and the SBT and virulence gene PCR results suggested that the isolates were pathogenic. Improved control and prevention strategies are urgently needed.

  15. Prevalence and Molecular Characteristics of Waterborne Pathogen Legionella in Industrial Cooling Tower Environments

    Directory of Open Access Journals (Sweden)

    Lijie Li

    2015-10-01

    Full Text Available Cooling towers are a source of Legionnaires’ disease. It is important from a public health perspective to survey industrial cooling towers for the presence of Legionella. Prospective surveillance of the extent of Legionella pollution was conducted at factories in Shijiazhuang, China between March 2011 and September 2012. Overall, 35.7% of 255 industrial cooling tower water samples showed Legionella-positive, and their concentrations ranged from 100 Colony-Forming Units (CFU/liter to 88,000 CFU/liter, with an average concentration of 9100 CFU/liter. A total of 121 isolates were obtained. All isolates were L. pneumophila, and the isolated serogroups included serogroups 1 (68 isolates, 56.2%, 6 (25, 20.7%, 5 (12, 9.9%, 8 (8, 6.6%, 3 (6, 5.0% and 9 (2, 1.6%. All 121 isolates were analyzed by pulsed-field gel electrophoresis (PFGE and 64 different patterns were obtained. All 121 isolates were analyzed sequence-based typing (SBT, a full 7-allele profile was obtained from 117 isolates. One hundred and seventeen isolates were divided into 49 sequence types. Two virulence genes, lvh and rtxA, are analyzed by polymerase chain reaction (PCR. 92.6% (112/121 and 98.3% (119/121 isolates carried lvh and rtxA respectively and 90.9% (110/121 of tested isolates carried both genes. Our results demonstrated high prevalence and genetic polymorphism of L. pneumophila in industrial cooling tower environments in Shijiazhang, China, and the SBT and virulence gene PCR results suggested that the isolates were pathogenic. Improved control and prevention strategies are urgently needed.

  16. Performance in wireless networks and industrial wireless networks on control processes in real time under industrial environments

    Directory of Open Access Journals (Sweden)

    Juan F. Monsalve-Posada

    2015-01-01

    Full Text Available The growing use of Ethernet networks on the industrial automation pyramid has led many companies to develop new devices to operate in requirements of this level, nowadays it is called Industrial Ethernet network, on the market there are various sensors and actuators to industrial scale equipped with this technology, many of these devices are very expensive. In this paper, the performance of two wireless networks is evaluated, the first network has conventional Ethernet devices, and the second network has Industrial Ethernet devices. For the process we vary four parameters such as distance, number of bytes, the signal to noise ratio, and the packet error rate, and then we measure delays and compare with metric statistics results, Box Plot graphs were used for the analysis. Finally, we conclude that under the parameters and conditions tested, wireless networks can serve as a communication system in control applications with allowable delays of up to 50 ms, in addition, the results show a better performance of Industrial Ethernet networks over conventional networks, with differences in the RTT of milliseconds. Therefore, it is recommended to establish what risk is for the process to control these delays to determine if the equipment conventional applies, since under certain features like humidity and temperature can operate properly for a considerable time and at lower cost than devices to Industrial Ethernet.

  17. Wireless multipoint communication for optical sensors in the industrial environment using the new Bluetooth standard

    Science.gov (United States)

    Hussmann, Stephan; Lau, Wing Y.; Chu, Terry; Grothof, Markus

    2003-07-01

    Traditionally, the measuring or monitoring system of manufacturing industries uses sensors, computers and screens for their quality control (Q.C.). The acquired information is fed back to the control room by wires, which - for obvious reason - are not suitable in many environments. This paper describes a method to solve this problem by employing the new Bluetooth technology to set up a complete new system, where a total wireless solution is made feasible. This new Q.C. system allows several line scan cameras to be connected at once to a graphical user interface (GUI) that can monitor the production process. There are many Bluetooth devices available on the market such as cell-phones, headsets, printers, PDA etc. However, the detailed application is a novel implementation in the industrial Q.C. area. This paper will contain more details about the Bluetooth standard and why it is used (nework topologies, host controller interface, data rates, etc.), the Bluetooth implemetation in the microcontroller of the line scan camera, and the GUI and its features.

  18. Best in class: hot competition makes Canada an 'incredibly innovative environment' by global industry standards

    International Nuclear Information System (INIS)

    Jaremko, G.

    2000-01-01

    The highly innovative environment in the field service sector of the oil and natural gas industry and the intense competition generated by it are discussed. Despite the fact that Canada produces only 3.5 per cent of the world's oil and 7.0 per cent of its natural gas, Canada is a world leader in the development of field service systems and equipment. On a return on investment basis the field service sector outperformed the exploration and production sector, and while many of them are small compared to the giants like Haliburton and Schlumberger, small field service companies frequently outperform the giants, if only because below 100 million dollars in revenues, investors expect a 25 to 30 per cent return on equity. Constant cost cutting and an eye on the bottom line, combined with products and services of high quality, and the intense rivalry and competition keeps the industry constantly on its toes to do more with less, to come up with innovative business practices and to stay on the cutting edge of new technology. Progress by several of the field service companies, large and small, are reviewed by way of illustration

  19. Electricity conflicts. Self-conception and strategic action of the electricity industry between politics, industry, the environment and the public (1970-1989)

    International Nuclear Information System (INIS)

    Erhardt, Hendrik

    2017-01-01

    The energy industry has undergone a fundamental transformation process over the past 50 years. The author examines in this study the beginnings and challenges of this process since the 1970s on the basis of previously unevaluated corporate and association sources. For the areas of energy demand, industry and the environment and the public, the author analyzes the behavior of the electricity industry, which since the 1970s has been moving between persistence and change pressure. What leeway did the companies have in these three areas? How did the energy suppliers' actions shape the German energy system? And how did their actions change their image in public? These questions the changes in the energy industry have so far neither been scientifically adequately investigated nor adequately reflected by the actors themselves. The results of the work thus make an important contribution to the analysis of the beginnings the energy transition. [de

  20. 75 FR 75937 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2010-12-07

    ... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines... internal combustion engines. Subsequently, the Administrator received two petitions for reconsideration... Any industry using a stationary 2211 Electric power reciprocating internal generation, combustion...

  1. Economy of conservation options in industry and developed environment. Part 2

    International Nuclear Information System (INIS)

    1994-03-01

    To determine the optimal situation for the energy supply in the working area of the IJsselmij and Sep the study on the title subject was carried out. To influence the energy demand demand-side management (DSM) as part of integrated resource planning (IRP) is applied. Several scenarios to determine whether new production capacity must be installed or conservation options and activities should be realized are elaborated and calculated by means of the COMPASS model. E3T compiled input data for the demand-side of the model: energy consumption and energy conservation, investment cost and operational cost per user, number of installations and the development of the penetration of the conservation options between 1990 and 2010, and required subsidies and promotional costs of the IJsselmij to introduce such options. Six of the options were selected and elaborated in detail. The results are presented in this report for the options: coverage of cooling and freezing equipment at night, frequency control of electric motors, decentralized heat production by means of advanced burners, indoor climate control in the built environment, reflectors for TL-lighting systems in the built environment, and behavioral change in industrial companies. In part 1 an overview is given of the economics, the selection and elaboration of the energy conservation options. 9 figs., 53 tabs., 71 refs., 1 appendix

  2. Economy of conservation options in the industry and the built environment. Part 1

    International Nuclear Information System (INIS)

    1994-03-01

    To determine the optimal situation for the energy supply in the working area of the IJsselmij and Sep the study on the title subject was carried out. To influence the energy demand demand-side management (DSM) as part of integrated resource planning (IRP) is applied. Several scenarios to determine whether new production capacity must be installed or conservation options and activities should be realized are elaborated and calculated by means of the COMPASS model. E3T compiled input data for the demand-side of the model: energy consumption and energy conservation, investment cost and operational cost per user, number of installations and the development of the penetration of the conservation options between 1990 and 2010, and required subsidies and promotional costs of the IJsselmij to introduce such options. The economics of the energy conservation options are given in chapter 2. Six of the options were selected and elaborated in detail in a separate publication (part 2): coverage of cooling and freezing equipment at night, frequency control of electric motors, decentralized heat production by means of advanced burners, indoor climate control in the built environment, reflectors for TL-lighting systems in the built environment, and behavioral change in industrial companies. 2 figs., 7 tabs., 7 refs., 4 appendices

  3. Quantifying emissions from spontaneous combustion

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-09-01

    Spontaneous combustion can be a significant problem in the coal industry, not only due to the obvious safety hazard and the potential loss of valuable assets, but also with respect to the release of gaseous pollutants, especially CO2, from uncontrolled coal fires. This report reviews methodologies for measuring emissions from spontaneous combustion and discusses methods for quantifying, estimating and accounting for the purpose of preparing emission inventories.

  4. Manifold methods for methane combustion

    Energy Technology Data Exchange (ETDEWEB)

    Yang, B.; Pope, S.B. [Cornell Univ., Ithaca, NY (United States)

    1995-10-01

    Great progresses have been made in combustion research, especially, the computation of laminar flames and the probability density function (PDF) method in turbulent combustion. For one-dimensional laminar flames, by considering the transport mechanism, the detailed chemical kinetic mechanism and the interactions between these two basic processes, today it is a routine matter to calculate flame velocities, extinction, ignition, temperature, and species distributions from the governing equations. Results are in good agreement with those obtained for experiments. However, for turbulent combustion, because of the complexities of turbulent flow, chemical reactions, and the interaction between them, in the foreseeable future, it is impossible to calculate the combustion flow field by directly integrating the basic governing equations. So averaging and modeling are necessary in turbulent combustion studies. Averaging, on one hand, simplifies turbulent combustion calculations, on the other hand, it introduces the infamous closure problems, especially the closure problem with chemical reaction terms. Since in PDF calculations of turbulent combustion, the averages of the chemical reaction terms can be calculated, PDF methods overcome the closure problem with the reaction terms. It has been shown that the PDF method is a most promising method to calculate turbulent combustion. PDF methods have been successfully employed to calculate laboratory turbulent flames: they can predict phenomena such as super equilibrium radical levels, and local extinction. Because of these advantages, PDF methods are becoming used increasingly in industry combustor codes.

  5. Environment

    International Nuclear Information System (INIS)

    McIntyre, A.D.; Turnbull, R.G.H.

    1992-01-01

    The development of the hydrocarbon resources of the North Sea has resulted in both offshore and onshore environmental repercussions, involving the existing physical attributes of the sea and seabed, the coastline and adjoining land. The social and economic repercussions of the industry were equally widespread. The dramatic and speedy impact of the exploration and exploitation of the northern North Sea resources in the early 1970s, on the physical resources of Scotland was quickly realised together with the concern that any environmental and social damage to the physical and social fabric should be kept to a minimum. To this end, a wide range of research and other activities by central and local government, and other interested agencies was undertaken to extend existing knowledge on the marine and terrestrial environments that might be affected by the oil and gas industry. The outcome of these activities is summarized in this paper. The topics covered include a survey of the marine ecosystems of the North Sea, the fishing industry, the impact of oil pollution on seabirds and fish stocks, the ecology of the Scottish coastline and the impact of the petroleum industry on a selection of particular sites. (author)

  6. The impact of industry role players on the competitiveness and profitability of an entity in a volatile environment

    Directory of Open Access Journals (Sweden)

    MGS Muli

    2014-01-01

    Full Text Available In the face of numerous challenges that organisations encounter they cannot survive independently of the industry in which they operate. Constant interaction with industry role players and the ability to adapt and align organisational strategies to changes within the industry are instrumental to improved profitability. This study aimed to better understand the impact that industry role players have on their profitability and competitiveness in a volatile environment. Such an appreciation will assist organisations to continuously adapt their strategies to industry variations. The airline industry was selected because of its volatility that has seen a decline in the profitability of airlines operating worldwide; and Air Zimbabwe in particular because of the extreme macro and micro environmental forces under which it operates. Zimbabwean aviation industry employees' in current employ at Air Zimbabwe, employed by foreign airlines, travel agents, ground handling agents and aviation regulators were interviewed. The impact on competitiveness and profitability of six major industry role players (competitor airlines, suppliers, buyers, substitute products, new entrants and regulatory authorities in the airline industry was analysed. There was general consensus among respondents that industry role players strongly impact on both the profitability and competitiveness.

  7. Biofuels combustion.

    Science.gov (United States)

    Westbrook, Charles K

    2013-01-01

    This review describes major features of current research in renewable fuels derived from plants and from fatty acids. Recent and ongoing fundamental studies of biofuel molecular structure, oxidation reactions, and biofuel chemical properties are reviewed, in addition to combustion applications of biofuels in the major types of engines in which biofuels are used. Biofuels and their combustion are compared with combustion features of conventional petroleum-based fuels. Two main classes of biofuels are described, those consisting of small, primarily alcohol, fuels (particularly ethanol, n-butanol, and iso-pentanol) that are used primarily to replace or supplement gasoline and those derived from fatty acids and used primarily to replace or supplement conventional diesel fuels. Research efforts on so-called second- and third-generation biofuels are discussed briefly.

  8. Influence of forest biomass grown in fertilized soils on combustion and gasification processes as well as on the environment with integrated bioenergy production

    Energy Technology Data Exchange (ETDEWEB)

    Jaanu, K. [VTT Energy, Jyvaeskylae (Finland)

    1999-07-01

    Project has started 1995 by determination of fertilized areas in Finland, Portugal and Spain. According to the results obtained from the analysis proper amount of pine and eucalyptus samples were selected for combustion and gasification tests. After that atmospheric and pressurized combustion and gasifications tests, including few series of gas clean up tests, have been performed by INETI and VTT. The 1 MW-scale long term test, were conducted by CIEMAT. The results are indicating that fertilization increases the potassium content in trees up to 50% or more depending upon the climate and conditions in soil. Alkali release seems to be an inverse function of the pressure indicating that the highest alkali release take place under atmospheric conditions corresponding to 111 mg/Nm{sup 3} which is over 25 wt.-% of total potassium in pine and 214 mg/Nm{sup 3} which is 32 wt.-% of total potassium in eucalyptus as received in the 1 MW ABFBC-tests. The potassium release is higher than allowed for the gas turbine process. Therefore the flue gas need to be cleaned up before it enters the gas turbine. For alkali removal at the operation conditions in oxidizing environment, the sorbent technology looks promising. According to the gasification tests the alkali release seems to be somewhat lower. Using for example filter system such as ceramic cancel filter the alkali emissions can be kept below requirements for gas turbine process using temperatures between 460-480 deg C. The research conducted here shows that fertilized biomass accumulate nutrients such potassium more than the non fertilized biomasses. Also the soil conditions has an effect to that. Due to the fact that alkalies in biomass are bonded differently than that of coal, the release is also higher. It could be shown that in combined gas turbine process the release of potassium is too high and need to be removed from the flue gas. It could also be shown that alkalies can be captured between 95-100 % at high temperature

  9. El proceso de sustitución de combustibles pesados por gas natural en el sector industrial del Valle del Cauca y del Cauca - Colombia 2004-2012

    Directory of Open Access Journals (Sweden)

    Andrés Eduardo Rangel Jiménez

    2016-01-01

    Full Text Available Este documento tiene por objetivo analizar el proceso de sustitución de la utilización de combustibles pesados hacia el gas natural por parte de medianas y grandes empresas ubicadas en el Valle del Cauca y norte del Cauca, que se observan durante el periodo 2004-2012. Asimismo, utilizando un modelo Probit de efectos aleatorios en Panel, se estima la propensión de estas industrias a sustituir un combustible altamente contaminante por gas natural. Los resultados muestran que la diferencia de gasto en gas con relación a otros combustibles es determinante en la probabilidad de conversión. Adicionalmente, se confirma que las industrias con menos probabilidad de realizar la conversión son aquellas que utilizan carbón en los procesos de producción.

  10. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  11. Industrialization

    African Journals Online (AJOL)

    Lucy

    scholar, Walt W. Rostow presented and supported this line of thought in his analysis of ... A Brief Historical Background of Industrialization in Africa ... indicative) The western model allowed for the political economy to be shaped by market.

  12. Assessment of hazardous solid waste of industries in Dashtestan county in the point of view of environment

    Directory of Open Access Journals (Sweden)

    A. Ameri

    2008-10-01

    Full Text Available Background and aims   Wastes are defined as a solid, liquid and gas materials that is produced from human activities, as direct or indirect. There is the possibility of linking between different complex of Geographic Information, which have a descriptive and locative relationship, simultaneously. GIS (Geographic Information System is as a bridge that it can relate resources  and management database together. The objective of this study was to investigate the condition of hazardous solid waste of industries in Dashtestan township and specification of volume and type of solid pollutants which probably can bring them in the environment and use of these outcomes for more recognition of establishment position of industries.   Methods   This study was evaluated on 8 industries according to type of products and type of each industry's hazardous solid waste. Then the 1/25000 scale digital topographic map was  provided and geographical coordination of each industries was determined by a GPS system. All of the obtained data were transferred to a GIS. Also a designed checklist and the existing standards were applied to determination of the list and the hazardous code of each industry.   Results   The obtained results showed that, 3 industries from 8, don't exactly conformed to the standards and in the sixth industry had susceptibility to be in the P category match to hazardous  waste list. All of the eight industries produced 174.5 ton/year of solid waste that 99.1% of them recycled after daily, monthly and seasonal storage.   Conclusion   62.5% of studied industries conformed to Iran protection agency's criteria, but some industries have a little problem in distance index from educational and residential centers.  Disposal of wastes in most industries didn't have any problem except in the sixth industries that   needs more investigation by experts and managers.

  13. A landscape-scale approach to examining the fate of atmospherically derived industrial metals in the surficial environment.

    Science.gov (United States)

    Stromsoe, Nicola; Marx, Samuel K; McGowan, Hamish A; Callow, Nikolaus; Heijnis, Henk; Zawadzki, Atun

    2015-02-01

    Industrial metals are now ubiquitous within the atmosphere and their deposition represents a potential source of contamination to surficial environments. Few studies, however, have examined the environmental fate of atmospheric industrial metals within different surface environments. In this study, patterns of accumulation of atmospherically transported industrial metals were investigated within the surface environments of the Snowy Mountains, Australia. Metals, including Pb, Sb, Cr and Mo, were enriched in aerosols collected in the Snowy Mountains by 3.5-50 times pre-industrial concentrations. In sedimentary environments (soils, lakes and reservoirs) metals showed varying degrees of enrichment. Differences were attributed to the relative degree of atmospheric input, metal sensitivity to enrichment, catchment area and metal behaviour following deposition. In settings where atmospheric deposition dominated (ombrotrophic peat mires in the upper parts of catchments), metal enrichment patterns most closely resembled those in collected aerosols. However, even in these environments significant dilution (by 5-7 times) occurred. The most sensitive industrial metals (those with the lowest natural concentration; Cd, Ag, Sb and Mo) were enriched throughout the studied environments. However, in alpine tarn-lakes no other metals were enriched, due to the dilution of pollutant-metals by catchment derived sediment. In reservoirs, which were located lower within catchments, industrial metals exhibited more complex patterns. Particle reactive metals (e.g. Pb) displayed little enrichment, implying that they were retained up catchment, whereas more soluble metals (e.g., Cu and Zn) showed evidence of concentration. These same metals (Cu and Zn) were depleted in soils, implying that they are preferentially transported through catchments. Enrichment of other metals (e.g. Cd) varied between reservoirs as a function of contributing catchment area. Overall this study showed that the fate

  14. Temporal Variation of Ambient PM10 Concentration within an Urban-Industrial Environment

    Science.gov (United States)

    Wong, Yoon-Keaw; Noor, Norazian Mohamed; Izzah Mohamad Hashim, Nur

    2018-03-01

    PM10 concentration in the ambient air has been reported to be the main pollutant affecting human health, particularly in the urban areas. This research is conducted to study the variation of PM10 concentration at the three urban-industrial areas in Malaysia, namely Shah Alam, Kuala Terengganu and Melaka. In addition, the association and correlation between PM10 concentration and other air pollutants will be distinguished. Five years interval dataset (2008-2012) consisting of PM10, SOX, NOX and O3 concentrations and other weather parameters such as wind speed, humidity and temperature were obtained from Department of Environment, Malaysia. Shah Alam shows the highest average of PM10 concentration with the value of 62.76 μg/m3 in June, whereas for Kuala Terengganu was 59.29 μg/m3 in February and 46.61 μg/m3 in August for Melaka. Two peaks were observed from the time series plot using the averaged monthly PM10 concentration. First peak occurs when PM10 concentration rises from January to February and the second peak is reached in June and remain high for the next two consecutive months for Shah Alam and Kuala Terengganu. Meanwhile the second peak for Melaka is only achieved in August as a result of the transboundary of smoke from forest fires in the Sumatra region during dry season from May to September. Both of the pollutants can be sourced from rapid industrial activities at Shah Alam. PM10 concentration is strongly correlated with carbon monoxide concentration in Kuala Terengganu and Melaka with value of r2 = 0.1725 and 0.2744 respectively. High carbon monoxide and PM10 concentration are associated with burning of fossil fuel from increased number of vehicles at these areas.

  15. Origin and tracing techniques of high 15N nitrogen compounds in industrial environments

    International Nuclear Information System (INIS)

    Talma, A.S.; Meyer, R.

    2002-01-01

    Effluents and process waters from various industrial plants were investigated for the 15 N/ 14 N isotope ratio in nitrate and ammonia. It was found that large isotope fractionation occurs in cases where ammonia is involved in gas-liquid phase changes. This feature was found to occur in two coke oven plants where ammonia gas is removed from a gas stream by solution in water, in an ammonia sulphate plant where ammonia gas is absorbed in sulphuric acid and in a water treatment plant where ammonia is removed from (high pH) water by blowing air through the process water. In all these cases 15 N isotope enrichments (in the range of 10 to 30 per mille) occurred. These enrichments are in excess of those found naturally. Ammonia in such wastewaters essentially retains this high 15 N content when it is converted to nitrate underground: which occurs rapidly under well-oxidised conditions. Nitrate is a fairly conservative tracer and its contamination in water can be followed readily. In the low recharge environment in the central parts of South Africa evidence of waste management practices of 10-20 years earlier were still quite evident using this isotopic label. The high 15 N nitrate signal could be used to distinguish industrial nitrogen pollution from pollution by local sewage disposal systems. Vegetation that derives its nitrogen from such high 15 N sources retains the isotope signature of its source. Grass and other annual plants then exhibit the isotope signature of the water of a specific year. Trees exhibit the isotope signature of deeper water, which shows the effects of longer term pollution events. The use of high 15 N as tracer enables the source apportionment of nitrogen derived pollution in these specific circumstances. (author)

  16. FY 1995 result report. Research/development on the creation of high-grade combustion technology using a microgravity environment; 1995 nendo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report summarized the results of the research survey carried out by Japan Space Utilization Promotion Center (JSUP) under the contract with NEDO's industrial technology research and development department. This research survey is aimed at creating high-grade combustion technology which can respond to the decrease in environmental pollutant in combustion exhaust gas from viewpoints of energy diversification and global environmental preservation in consideration of the stabilized energy supply. Established inside JSUP is a research/development committee on high-grade combustion technology which is organized by men of learning and experience from universities, national institutes, private companies, etc. Following FY 1994, the following were continuously conducted: (1) joint research with NASA as an international research cooperation; (2) test using microgravity test facilities and analysis/evaluation of the test data. The experiment was conducted using facilities, etc. of the underground gravity-free test center established as a part of the national research base arrangement project. A lot of experimental data were obtained and stored which are useful for elucidation of the combustion mechanism and the development of ground combustor. (NEDO)

  17. Proceedings of the Scientific Meeting on Application of Isotopes and Radiation: Book 2. Chemistry, Environment, Radiation Process, And Industry

    Energy Technology Data Exchange (ETDEWEB)

    Suhadi, F; Sisworo, E L; Maha, M; Ismachin, M; Hilmy, N; Sumatra, M; Mugiono,; Wandowo,; Soebianto, Y S [Center for Application of Isotopes and Radiation, National Atomic Energy Agency, Jakarta (Indonesia)

    1998-07-01

    The aim of the 10th Meeting of the Isotope and Radiation Application is to disseminate the result of research on application of nuclear techniques on agriculture, animal, biology, chemistry, environment, radiation process and industry. The meeting was held in Jakarta, 18-19 February 1998, and there were 6 invited papers and 52 papers indexed individually. This proceeding is divided by two volumes. Volume I and volume II consists of agriculture, animal, biology and chemistry, environment, radiation process and industry, respectively.(ID)

  18. Proceedings of the Scientific Meeting on Application of Isotopes and Radiation: Book 2. Chemistry, Environment, Radiation Process, And Industry

    International Nuclear Information System (INIS)

    Suhadi, F.; Sisworo, E.L.; Maha, M.; Ismachin, M.; Hilmy, N.; Sumatra, M.; Mugiono; Wandowo; Soebianto, Y.S.

    1998-01-01

    The aim of the 10th Meeting of the Isotope and Radiation Application is to disseminate the result of research on application of nuclear techniques on agriculture, animal, biology, chemistry, environment, radiation process and industry. The meeting was held in Jakarta, 18-19 February 1998, and there were 6 invited papers and 52 papers indexed individually. This proceeding is divided by two volumes. Volume I and volume II consists of agriculture, animal, biology and chemistry, environment, radiation process and industry, respectively.(ID)

  19. Bed agglomeration risk related to combustion of cultivated fuels (wheat straw, red canary grass, industrial hemp) in commercial bed materials; Baeddagglomereringsrisk vid foerbraenning av odlade braenslen (hampa, roerflen, halm) i kommersiella baeddmaterial

    Energy Technology Data Exchange (ETDEWEB)

    Erhardsson, Thomas; Oehman, Marcus; Geyter, Sigrid de; Oehrstroem, Anna

    2006-12-15

    The market of forest products is expanding and thus resulting in more expensive biomass fuels. Therefore research within the combustion industry for alternative fuels is needed, for example cultivated fuels. Combustion and gasification research on these cultivated fuels are limited. The objectives of this work was to increase the general knowledge of silicon rich cultivated fuels by study the agglomeration characteristics for wheat straw, reed canary grass and industrial hemp in combination with commercial bed materials. Controlled fluidized bed agglomeration tests was conducted in a 5 kW, bench-scale, bubbling fluidized bed reactor. The tendencies of agglomeration were determined with the three cultivated fuels in combination with various minerals present in natural sand (quarts, plagioclase and potassium feldspar) and an alternative bed material (olivine). During the experiments bed samples and formed agglomerates were collected for further analyses with a scanning electron microscope (SEM) and with X-ray microanalysis (EDS). Wheat straw had the highest agglomeration tendency of the studied fuels followed by reed canary grass and industrial hemp. No significant layer formation was found around the different bed particles. Instead, the ash forming matter were found as individual ash sticky (partial melted) particles in the bed. The bed material mineralogical composition had no influence of the agglomeration process because of the non layer formation propensities of the used silicon rich fuels.

  20. Sustainable industrial policy and environment. challenges and opportunities; Politica industrial sostenible y medio ambiente. Dificultades y oportunidades

    Energy Technology Data Exchange (ETDEWEB)

    Valle Munoz, M.

    2013-06-01

    The European Union is aware that the current model of production and consumption contributes to global warming, pollution, intensive use of materials and depletion of natural resources and, for that reason, it promotes since years the adoption of more sustainable patterns. Increasing efficiency in the use of resources in the generation and use of energy and the production of goods could also be a powerful source of innovation and a major industrial competitiveness, according to the Commission. This article discusses the existing complementary strategies in efficiency in the use of resources, raw materials, energy, and the energy and climate package adopted in 2008, and the difficulties and opportunities that the industry is facing to implement this policy in the current economic slowdown. (Author)

  1. Nanosafety by design: risks from nanocomposite/nanowaste combustion

    Science.gov (United States)

    Bouillard, Jacques X.; R'Mili, Badr; Moranviller, Daniel; Vignes, Alexis; Le Bihan, Olivier; Ustache, Aurelien; Bomfim, Joao A. S.; Frejafon, Emeric; Fleury, Dominique

    2013-04-01

    Risks associated with the end-of-life of nanomaterials are an issue that needs to be addressed so that the public perception and opinion, with regard to these emerging technological products, can effectively be supported by experimental evidences. In order to find new ecological ways to treat nanoproducts at their end-of-life, a new home-made demonstrator system was setup at INERIS, specifically designed to perform burning tests, coupled to a differential thermal analyzer to monitor the combustion kinetics. To assess nanoobject release during combustion, a high-performance nanocomposite polymer commonly used in the automotive industry, namely the polymeric compound acrylonitrile butadiene styrene matrix mixed with 3 wt% of multiwalled carbon nanotubes (MWCNTs) was tested. To assess the potential release of carbon nanotubes (CNTs) during the combustion with this tool, the particle size distribution in the fumes was measured using an electrical low pressure impactor, and CNTs were collected using an aspiration-based transmission electron microscopy grid sampler. One of primary objective of these preliminary tests described in this study consisted in validating whether CNT fibers can be released in the gas phase during the combustion of a polymeric matrix filled with CNTs. It was found indeed that MWCNT of about 12-nm diameter and 600-nm length can be released in the ambient environment during combustion of 3 % MWCNT ABS. Such information is critical to assess whether a nanoproduct can be deemed to be considered as "nanosafe by design" in its risk assessment.

  2. Nanosafety by design: risks from nanocomposite/nanowaste combustion

    International Nuclear Information System (INIS)

    Bouillard, Jacques X.; R’Mili, Badr; Moranviller, Daniel; Vignes, Alexis; Le Bihan, Olivier; Ustache, Aurelien; Bomfim, Joao A. S.; Frejafon, Emeric; Fleury, Dominique

    2013-01-01

    Risks associated with the end-of-life of nanomaterials are an issue that needs to be addressed so that the public perception and opinion, with regard to these emerging technological products, can effectively be supported by experimental evidences. In order to find new ecological ways to treat nanoproducts at their end-of-life, a new home-made demonstrator system was setup at INERIS, specifically designed to perform burning tests, coupled to a differential thermal analyzer to monitor the combustion kinetics. To assess nanoobject release during combustion, a high-performance nanocomposite polymer commonly used in the automotive industry, namely the polymeric compound acrylonitrile butadiene styrene matrix mixed with 3 wt% of multiwalled carbon nanotubes (MWCNTs) was tested. To assess the potential release of carbon nanotubes (CNTs) during the combustion with this tool, the particle size distribution in the fumes was measured using an electrical low pressure impactor, and CNTs were collected using an aspiration-based transmission electron microscopy grid sampler. One of primary objective of these preliminary tests described in this study consisted in validating whether CNT fibers can be released in the gas phase during the combustion of a polymeric matrix filled with CNTs. It was found indeed that MWCNT of about 12-nm diameter and 600-nm length can be released in the ambient environment during combustion of 3 % MWCNT ABS. Such information is critical to assess whether a nanoproduct can be deemed to be considered as “nanosafe by design” in its risk assessment.

  3. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  4. Molten salt combustion of radioactive wastes

    International Nuclear Information System (INIS)

    Grantham, L.F.; McKenzie, D.E.; Richards, W.L.; Oldenkamp, R.D.

    1976-01-01

    The Atomics International Molten Salt Combustion Process reduces the weight and volume of combustible β-γ contaminated transuranic waste by utilizing air in a molten salt medium to combust organic materials, to trap particulates, and to react chemically with any acidic gases produced during combustion. Typically, incomplete combustion products such as hydrocarbons and carbon monoxide are below detection limits (i.e., 3 ) is directly related to the sodium chloride vapor pressure of the melt; >80% of the particulate is sodium chloride. Essentially all metal oxides (combustion ash) are retained in the melt, e.g., >99.9% of the plutonium, >99.6% of the europium, and >99.9% of the ruthenium are retained in the melt. Both bench-scale radioactive and pilot scale (50 kg/hr) nonradioactive combustion tests have been completed with essentially the same results. Design of three combustors for industrial applications are underway

  5. Modern tools and concepts to optimise flames and combustions, e.g. in power plants and industrial furnaces, by using optical flame information (radiation).

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, D. [ORFEUS Combustion Engineering (Germany)

    1999-07-01

    The ORFEUS system uses a combination of emission spectroscopy, state-of-art video technology and knowledge based systems to optimise combustion and reduce emissions. The paper describes the system, (in particular for coal fired systems) and its application at HEW Power Station Tiefstack, Hamburg (Germany). 1 fig., 8 slides

  6. The competitive environment in the assurance industry : a South African case study de Villiers R.H.

    OpenAIRE

    De Villiers, Rihard Holmes.

    2012-01-01

    The assurance industry is fiercely competitive with intense rivalry among the Big Four assurance firms. Clients also exert extreme pricing pressure on audit fees to further strain profitability. Understanding and analysing the various drivers within the competitive assurance environment help an organisation to better combat the competitive forces and derive a strategy that will enable it to obtain a competitive advantage. This study analyses the competitive South African assurance environment...

  7. An empirical investigation of the work environment on board industrial- and cruise ships and the associations with safety

    OpenAIRE

    Heidenstrøm, Øyvind Teige

    2011-01-01

    The overall aim of this study was to examine the work environment and the associations with safety, and see the relations with occupational accidents and undesired events on board industrial and cruise ships. 215 seafarers participated in this quantitative survey study, with a response rate of 35%. When conducting the hierarchical block regression analysis separately on superiors/officers and subordinates/ratings, the work environment emerged as a predictor for safety status (compliance, atti...

  8. Concept and design of a virtual reality work environment for industrial designers; Konzeption und Entwurf eines VR Arbeitsplatzes im Bereich des Industrial Design

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, T.; Bruder, R. [Universitaet Essen (Germany). Institut fuer Ergonomie und Designforschung

    2002-07-01

    This concept of a working environment for industrial designers is based on the use of Virtual Reality. The project aims at making the design process using new technologies just as intuitive as the work involving traditional tools. Basis of the development is a human centered principle, not the concentration on available technologies. The project was developed in cooperation with the Fraunhofer Gesellschaft (Institute for media communication) in Sankt Augustin, Germany. (orig.)

  9. An experimental and numerical study of confined non-reacting and reacting turbulent jets to facilitate homogeneous combustion in industrial furnaces

    Science.gov (United States)

    Lee, Insu

    Confined non-reacting turbulent jets are ideal for recirculating the hot flue gas back into the furnace from an external exhaust duct. Such jets are also used inside the furnace to internally entrain and recirculate the hot flue gas to preheat and dilute the reactants. Both internal and external implementation of confined turbulent jets increase the furnace thermal efficiency. For external implementation, depending on the circumstances, the exhaust gas flow may be co- or counter-flow relative to the jet flow. Inside the furnaces, fuel and air jets are injected separately. To create a condition which can facilitate near homogeneous combustion, these jets have to first mix with the burned gas inside the furnace and simultaneously being heated and diluted prior to combustion. Clearly, the combustion pattern and emissions from reacting confined turbulent jets are affected by jet interactions, mixing and entrainment of hot flue gas. In this work, the flow and mixing characteristics of a non-reacting and reacting confined turbulent jet are investigated experimentally and numerically. This work consists of two parts: (i) A study of flow and mixing characteristics of non-reacting confined turbulent jets with co- or counter-flowing exhaust/flue gas. Here the axial and radial distributions of temperature, velocity and NO concentration (used as a tracer gas) were measured. FLUENT was used to numerically simulate the experimental results. This work provides the basic understanding of the flow and mixing characteristics of confined turbulent jets and develops some design considerations for recirculating flue gas back into the furnace as expressed by the recirculation zone and the stagnation locations. (ii) Numerical calculations of near homogeneous combustion are performed for the existing furnace. The exact geometry of the furnace in the lab is used and the real dimensional boundary conditions are considered. The parameters such as air nozzle diameter (dair), fuel nozzle

  10. Evaluation of potential hazards presented by the nearby industrial environment and transportation routes

    International Nuclear Information System (INIS)

    1982-05-01

    RFS or Regles Fondamentales de Surete (Basic Safety Rules) applicable to certain types of nuclear facilities lay down requirements with which compliance, for the type of facilities and within the scope of application covered by the RFS, is considered to be equivalent to compliance with technical French regulatory practice. The object of the RFS is to take advantage of standardization in the field of safety, while allowing for technical progress in that field. They are designed to enable the operating utility and contractors to know the rules pertaining to various subjects which are considered to be acceptable by the Service Central de Surete des Installations Nucleaires, or the SCSIN (Central Department for the Safety of Nuclear Facilities). These RFS should make safety analysis easier and lead to better understanding between experts and individuals concerned with the problems of nuclear safety. The SCSIN reserves the right to modify, when considered necessary, any RFS and specify, if need be, the terms under which a modification is deemed retroactive. The purpose of this RFS is to define methods for determining risks created by potential hazards represented by the industrial environment and transportation routes in the vicinity of a PWR, in order to verify design criteria acceptability with regard to such hazards

  11. Business process projection in relation to the internationalization of the external environment of industrial companies

    Directory of Open Access Journals (Sweden)

    Váchal Jan

    2017-01-01

    Full Text Available Highly intensive internalization of the world economy requires the business sector to have different view of strategic management and decision making, together with the quality and content of business processes. Changes in the environment of enterprises significantly influence their function and behaviour, causing a need to significantly change enterprise architecture, including the design of development strategies. The paper focuses on analysing the processes of industrial enterprises, dealing with their importance and profit, classified by size. The result revealed that process activities, such as input logistics and marketing, are dominant in micro-enterprises, and such activities are important in profitable enterprises. In middle-sized enterprises, there is a more significant difference between marketing/sales and services without any relations to profit. However, there is a requirement to intensify these activities in non-profitable enterprises. Large enterprises revealed a significant influence of the scientific and technological development and also, to a lesser extent, of marketing, sales and purchase. Non-profitable enterprises should also focus on improving the quality of such processes.

  12. The responsible for the radiological safety in the industry. Between the environment work and the technology

    International Nuclear Information System (INIS)

    Truppa, Walter Adrian

    2005-01-01

    Within the industrial applications of sealed radioactive sources, there are two clearly defined branches for which these materials are used: radioactive sources used in fixed and mobile equipment. These devices are used in a myriad of applications and each time with more technological advanced systems. This requires a permanent improvement on the training of the responsible, and introduces a mandatory exchange to other groups of intervention during the useful life of the device. Accident risks during the use of the equipment, although its rate of occurrence is low, are related to mistakes during operation, improper use, maintenance performed by staff without knowledge, human failures or oversights and incidents occurring during transport. All these risks are surrounded by different groups of factors that influence during the safe use of radioactive material within the installation. So, it is evidenced the importance of implementing aspects of the 'Safety Culture' and evaluations of suitability of the person responsible for radiation safety. In this paper we will refer to all the concepts that surround the election of the head of radioactive material, the factors involved during the operation, their training, the obligations of the installation, and responsible for environment and the technology

  13. Demonstration of TEG-powered wireless autonomous transducer solution for condition monitoring in industrial environment

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Ziyang; Patrascu, Mihai; Su, Jiale; Vullers, Ruud J.M. [imec the Netherlands, Eindhoven (Netherlands)

    2011-07-01

    Imec/Holst Centre focuses on the development of wireless autonomous transducer solution, which is poised to bring about huge impact in the sectors of health care, machinery, transportation and energy, etc. In this paper, we first showcase a TEG-powered demonstration for condition monitoring in industrial environment. Composing of sensor-actuator, front-end interface, digital signal processing unit and radio, the developed wireless sensor node can monitor the changing operating condition, i.e. the loading on a rolling-element bearing, on a rotating shaft. The use of a specially designed TEG, working in tandem with an energy storage device, can significantly improve the energy autonomy of the condition monitoring system as a whole. The different components in the demonstration are presented. Subsequently, the experimental results of vibration signature analysis are exhibited. On one hand, the presented demonstration sheds light on the huge potential of thermoelectric energy harvesting to achieve energy autonomy. On the other hand, it also points to the aspects that are in need of further development, namely miniaturization and cost reduction of energy harvesters. Aimed at the delivery of cost-effective miniaturized thermoelectric harvesting devices, imec/Holst Centre has been tackling with the relevant challenges by resorting to, but not limited to, its expertise in micromachining. An update on the latest research results is subsequently given with regard to various micromachined thermoelectric devices, fully fledged wearable TEGs with custom designed package and thermoelectric material property optimization. (orig.)

  14. Design of an Infrared Imaging System for Robotic Inspection of Gas Leaks in Industrial Environments

    Directory of Open Access Journals (Sweden)

    Ramon Barber

    2015-03-01

    Full Text Available Gas detection can become a critical task in dangerous environments that involve hazardous or contaminant gases, and the use of imaging sensors provides an important tool for leakage location. This paper presents a new design for remote sensing of gas leaks based on infrared (IR imaging techniques. The inspection system uses an uncooled microbolometer detector, operating over a wide spectral bandwidth, that features both low size and low power consumption. This equipment is boarded on a robotic platform, so that wide objects or areas can be scanned. The detection principle is based on the use of active imaging techniques, where the use of external IR illumination enhances the detection limit and allows the proposed system to operate in most cases independently from environmental conditions, unlike passive commercial approaches. To illustrate this concept, a fully radiometric description of the detection problem has been developed; CO2 detection has been demonstrated; and simulations of typical gas detection scenarios have been performed, showing that typical industrial leaks of CH4 are well within the detection limits. The mobile platform where the gas sensing system is going to be implemented is a robot called TurtleBot. The control of the mobile base and of the inspection device is integrated in ROS architecture. The exploration system is based on the technique of Simultaneous Localization and Mapping (SLAM that makes it possible to locate the gas leak in the map.

  15. The reconfiguration of the SA defence industry in the post-2015-defence review environment: prospects & challenges

    CSIR Research Space (South Africa)

    Khanyile, Moses

    2017-10-01

    Full Text Available IMPLICATIONS • Licence category (FSB) • Credit licence (NCR) • Forex Licence (SARB) Armscor & AMD Initiative: Establishment of the Defence Industry Fund (DIF) WAY FORWARD Finalisation of the Defence Industry Strategy Drafting...

  16. The organization enacts the environment and the environment feeds back : mortality rates in the UK motorcycle industry, 1895-1993

    NARCIS (Netherlands)

    Wezel, Filippo Carlo

    2002-01-01

    This paper uses the information on 648 manufacturers during the period included between 1895 and 1993 to explore the interaction of different levels of analysis in developing of the United Kingdom motorcycle industry. It provides three general results. First, it demonstrates how long term changes of

  17. Effects of regulation and economic environment on the electricity industry's competitiveness: A study based on OECD countries

    International Nuclear Information System (INIS)

    Baek, Chulwoo; Jung, Euy-Young; Lee, Jeong-Dong

    2014-01-01

    We propose a competitiveness index for the electricity industry based on efficiency, stability, and growth factors identified from previous studies subject to data accessibility. These are then weighted appropriately through the application of the analytical hierarchy process. This index is an alternative tool to capture the diverse characteristics of the electricity industry in order to analyze performance after deregulation. Using the competitiveness index, we analyze the effect of regulation change in specific economic environments represented by the level of economic development, energy intensity, and manufacturing share, for example. According to the results, deregulation generally increases competitiveness, but the effect depends on the economic environment and the type of regulation. Deregulating entry and vertical integration to increase competitiveness is more effective in countries where the level of economic development, energy intensity, and manufacturing share are low. The manner in which the privatization effect is related to the economic environment is, however, unclear. - Highlights: • This study proposes a competitiveness index for the electricity industry. • It examines the effects of electricity industry deregulation in OECD countries. • It suggests an economic environment in which deregulation can contribute to competitiveness

  18. Toward a Case Definition of Adverse Health Effects in the Environs of Industrial Wind Turbines: Facilitating a Clinical Diagnosis

    Science.gov (United States)

    McMurtry, Robert Y.

    2011-01-01

    Internationally, there are reports of adverse health effects (AHE) in the environs of industrial wind turbines (IWT). There was multidisciplinary confirmation of the key characteristics of the AHE at the first international symposium on AHE/IWT. The symptoms being reported are consistent internationally and are characterized by crossover findings…

  19. Managing information security in a process industrial environment; Gestao de seguranca da informacao em processos industriais

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Raphael Gomes; Aguiar, Leandro Pfleger de [Siemens Company (Brazil)

    2008-07-01

    With the recently globalization expansion (growth), the exploration of energetic resources is crossing over countries boundaries, resulting in worldwide companies exploring Oil and Gas fields available in any place of the world. To the government's bodies, this information about those fields should be treated as a national security interest subject by bringing an adequate management and protection to all the important and critical information and assets, and making possible, at the same time, the freedom and transparency in concurrence processes. This create a complex security context to be managed, where information disruption might, for instance, imply in broke of integrity in public auctions processes as a result of privileged information usage. Furthermore, with the terrorism problem, the process itself becomes an attractive target for different kinds of attacks, motivated by the opportunism to explore the known incapacity of the big industries in well manage their large and complex environments. With all transformations that are happening in productive processes, as the growing TCP/IP protocol usage, the Windows operating systems adoption in SCADA systems and the integration of industrial with business network, are factors that contribute to an eminent landscape of problems. This landscape demonstrates the need from the organizations and countries that are operating in energetic resources exploration, for renew their risk management areas, establishing a unique and integrated process to protect information security infrastructure. This work presents a study of the challenges to be faced by the organizations while rebuilding their internal processes to integrate the risk management and information security areas, as long as a set of essential steps to establish an affective corporative governance of risk management and compliance aspects. Moreover, the work presents the necessary points of the government involvement to improve all the regulatory aspects

  20. Combustion chemistry and formation of pollutants; Chimie de la combustion et formation des polluants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This book of proceedings reports on 7 papers on combustion chemistry and formation of pollutants presented during the workshop organized by the `Combustion and Flames` section of the French society of thermal engineers. The chemistry of combustion is analyzed in various situations such as: turbojet engines, spark ignition engines, industrial burners, gas turbines etc... Numerical simulation is used to understand the physico-chemical processes involved in combustion, to describe the kinetics of oxidation, combustion and flame propagation, and to predict the formation of pollutants. (J.S.)

  1. Modelling combustion reactions for gas flaring and its resulting emissions

    Directory of Open Access Journals (Sweden)

    O. Saheed Ismail

    2016-07-01

    Full Text Available Flaring of associated petroleum gas is an age long environmental concern which remains unabated. Flaring of gas maybe a very efficient combustion process especially steam/air assisted flare and more economical than utilization in some oil fields. However, it has serious implications for the environment. This study considered different reaction types and operating conditions for gas flaring. Six combustion equations were generated using the mass balance concept with varying air and combustion efficiency. These equations were coded with a computer program using 12 natural gas samples of different chemical composition and origin to predict the pattern of emission species from gas flaring. The effect of key parameters on the emission output is also shown. CO2, CO, NO, NO2 and SO2 are the anticipated non-hydrocarbon emissions of environmental concern. Results show that the quantity and pattern of these chemical species depended on percentage excess/deficiency of stoichiometric air, natural gas type, reaction type, carbon mass content, impurities, combustion efficiency of the flare system etc. These emissions degrade the environment and human life, so knowing the emission types, pattern and flaring conditions that this study predicts is of paramount importance to governments, environmental agencies and the oil and gas industry.

  2. Process for the manufacture of a filter material for cleaning industrial or internal combustion engine exhaust gases and filter material manufactured according to the process. Verfahren zur Herstellung eines Filterstoffes zur Reinigung von industriellen oder Brennkraftmaschinen-Abgasen und ein hiernach hergestellter Filterstoff

    Energy Technology Data Exchange (ETDEWEB)

    Bumbalek, A.

    1986-01-02

    This is a process for the manufacture of a filter material for cleaning industrial or internal combustion engine exhaust gases and filter material manufactured according to the process. The filter material is manufactured from the mineralized combustion product of peel of tropical fruits burnt at a temperature of 820/sup 0/C to 840/sup 0/C in an oxidising atmosphere excluding the production of carbon, particularly using banana skins and orange peels, which product is granulated with carrier materials or compressed.

  3. Advanced Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, Gordon R. [NETL

    2013-03-11

    The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

  4. Radiation protection measurement techniques and the challenges encountered in industrial and medical environments

    International Nuclear Information System (INIS)

    2013-01-01

    Nowadays everybody is concerned by the use of ionizing radiations for diagnostic and therapy purposes. Radiation protection regulatory requirements are becoming more and more constraining and have an impact on the performance criteria required for measurement systems. The measurement of some radiation protection data requires the use of complex and costly devices, leading to hardly manageable constraints for the users. Do they have to be systematically implemented? How is it possible to reduce, control and optimize the medical exposures using new methodological approaches? During this conference the participants have shed light on some concrete situations and realisations in the environmental, nuclear industry and medical domains. The document brings together 34 presentations (slides) dealing with: 1 - Environmental monitoring and measurement meaning (P.Y. Emidy (EDF)); human radiation protection and measurement meaning (A. Rannou (IRSN)); Eye lens dosimetry, why and how? (J.M. Bordy (CEA)); critical and reasoned approach of the ISO 11929 standard about decision threshold and detection limit (A. Vivier (CEA)); Samples collection and low activities measurement in the environment (D. Claval (IRSN)); Dosemeters calibration, what is new? (J.M. Bordy (CEA)); Appropriateness of measurement means for radiological controls (P. Tranchant (Techman Industrie)); Pulsed fields dosimetric reference for interventional diagnosis (M. Denoziere (CEA)); Pulsed complex fields dosimetry (F. Trompier (IRSN)); DOSEO: a tool for dose optimization in radiological imaging (C. Adrien (CEA)); Eye lens dosimetry (R. Kramar, A. De Vita (AREVA)); Eye lens dosimetry - workers exposure and proper radiation protection practices (I. Clairand (IRSN)); Individual neutrons dosimetry - status of existing standards (F. Queinnec (IRSN)); Complex field neutron spectroscopy: any new tool? (V. Lacoste (IRSN)); Photon mini-beams dosimetry in radiotherapy: stakes and protocols (C. Huet (IRSN)); Reference and

  5. Strategies for the development of Quebec`s petrochemical industry: education and environment

    Energy Technology Data Exchange (ETDEWEB)

    O`Connor, J.A. [Canadian Chemical Producer`s Association (Canada)

    1992-12-31

    One of the key challenges not only for the Quebec but for the Canadian petrochemical industry will be the challenge to increase the number of students pursuing science or engineering as fields of study. According to this author, there is a crisis in science and technology education in Canada. The ability of Canadian students to compete with their peers around the world is steadily diminishing as a result of the undue emphasis on student attitudes and self-esteem in Canadian schools, as opposed to European and Asian schools which focus on conveying specific skills. He advocates a shift in attitude away from simply more money spent on education towards concern with what and how well students are learning. It was suggested that the educational system must take into account the demands of the market place in fashioning the curricula. If students are to function in the real world where performance is evaluated, the educational system will have to change to reflect the fact that the market and society reward people in proportion to their contribution. The relationship between environmental concern and education was also explored, and the inclusion of environmental issues in the classroom curriculum was recommended. As a topic for curricula, the environment is subject to broad-ranging and often conflicting views regarding its problems and their causes, effects and remedies. Nevertheless, it is not a transient issue to be dismissed as a fad. Rather, it is an issue here to stay, hence it should play a more formalized role at all levels of the curriculum from primary schools to colleges and universities.

  6. Work, work-life conflict and health in an industrial work environment.

    Science.gov (United States)

    Hämmig, O; Bauer, G F

    2014-01-01

    Work-life conflict has been poorly studied as a cause of ill-health in occupational medicine. To study associations between physical and psychosocial working conditions, including work-life conflict on the one hand and general, physical and mental health outcomes on the other. Cross-sectional data were used from an employee survey among the workforces of four medium-sized and large companies in Switzerland. Physical work factors included five demands and exposures such as heavy loads, repetitive work and poor posture. Psychosocial factors included 14 demands and limited resources such as time pressure, overtime, monotonous work, job insecurity, low job autonomy, low social support and work-life conflict. Health outcomes studied were self-rated health, sickness absence, musculoskeletal disorders, sleep disorders, stress and burnout. There was a response rate of 49%; 2014 employees participated. All adverse working conditions were positively associated with several poor health outcomes in both men and women. After mutual adjustment for all work factors and additional covariates, only a few, mainly psychosocial work factors remained significant as risk factors for health. Work-life conflict, a largely neglected work-related psychosocial factor in occupational medicine, turned out to be the only factor that was significantly and strongly associated with all studied health outcomes and was consistently found to be the strongest or second strongest of all the studied risk factors. Even in an industrial work environment, psychosocial work factors, and particularly work-life conflict, play a key role and need to be taken into consideration in research and workplace health promotion.

  7. Determination of Spatial Chromium Contamination of the Environment around Industrial Zones

    Science.gov (United States)

    Homa, Dereje; Haile, Ermias

    2016-01-01

    This study was conducted to determine the spatial levels of chromium contamination of water, agricultural soil, and vegetables in the leather tanning industrial areas using spectrophotometric methods. The results showed elevated accumulation of total Cr ranging from 10.85 ± 0.885 mg/L to 39.696 ± 0.326 mg/L, 16.225 ± 0.12 mg/Kg to 1581.667 ± 0.122 mg/Kg, and 1.0758 ± 0.05348 mg/Kg to 11.75 ± 0.206 mg/Kg in water, agricultural soil, and vegetable samples, respectively. The highest levels of chromium (VI) found from the speciation study were 2.23 ± 0.032 mg/Kg and 0.322 ± 0.07 mg/L in soil and water samples, respectively, which decreased with distance from the tannery. Among the vegetables, the highest load of Cr(VI) was detected in onion root (0.048 ± 0.065 mg/Kg) and the lowest (0.004 ± 0.007 mg/Kg) in fruit of green pepper. The detected levels of Cr in all of the suggested samples were above the WHO permissible limits. The variations of the levels Cr(III) and Cr(VI) contamination of the environment with distance from the tannery were statistically significant (p = 0.05). Similarly, significant difference in the levels of Cr among the tested vegetables was recorded. The levels increased with decreasing distance from the effluent channel. PMID:28044079

  8. Strategies for the development of Quebec's petrochemical industry: education and environment

    International Nuclear Information System (INIS)

    O'Connor, J.A.

    1992-01-01

    One of the key challenges not only for the Quebec but for the Canadian petrochemical industry will be the challenge to increase the number of students pursuing science or engineering as fields of study. According to this author, there is a crisis in science and technology education in Canada. The ability of Canadian students to compete with their peers around the world is steadily diminishing as a result of the undue emphasis on student attitudes and self-esteem in Canadian schools, as opposed to European and Asian schools which focus on conveying specific skills. He advocates a shift in attitude away from simply more money spent on education towards concern with what and how well students are learning. It was suggested that the educational system must take into account the demands of the market place in fashioning the curricula. If students are to function in the real world where performance is evaluated, the educational system will have to change to reflect the fact that the market and society reward people in proportion to their contribution. The relationship between environmental concern and education was also explored, and the inclusion of environmental issues in the classroom curriculum was recommended. As a topic for curricula, the environment is subject to broad-ranging and often conflicting views regarding its problems and their causes, effects and remedies. Nevertheless, it is not a transient issue to be dismissed as a fad. Rather, it is an issue here to stay, hence it should play a more formalized role at all levels of the curriculum from primary schools to colleges and universities

  9. Determination of Spatial Chromium Contamination of the Environment around Industrial Zones

    Directory of Open Access Journals (Sweden)

    Dereje Homa

    2016-01-01

    Full Text Available This study was conducted to determine the spatial levels of chromium contamination of water, agricultural soil, and vegetables in the leather tanning industrial areas using spectrophotometric methods. The results showed elevated accumulation of total Cr ranging from 10.85±0.885 mg/L to 39.696±0.326 mg/L, 16.225±0.12 mg/Kg to 1581.667±0.122 mg/Kg, and 1.0758±0.05348 mg/Kg to 11.75±0.206 mg/Kg in water, agricultural soil, and vegetable samples, respectively. The highest levels of chromium (VI found from the speciation study were 2.23±0.032 mg/Kg and 0.322±0.07 mg/L in soil and water samples, respectively, which decreased with distance from the tannery. Among the vegetables, the highest load of Cr(VI was detected in onion root (0.048±0.065 mg/Kg and the lowest (0.004±0.007 mg/Kg in fruit of green pepper. The detected levels of Cr in all of the suggested samples were above the WHO permissible limits. The variations of the levels Cr(III and Cr(VI contamination of the environment with distance from the tannery were statistically significant (p=0.05. Similarly, significant difference in the levels of Cr among the tested vegetables was recorded. The levels increased with decreasing distance from the effluent channel.

  10. Determination of Spatial Chromium Contamination of the Environment around Industrial Zones.

    Science.gov (United States)

    Homa, Dereje; Haile, Ermias; Washe, Alemayehu P

    2016-01-01

    This study was conducted to determine the spatial levels of chromium contamination of water, agricultural soil, and vegetables in the leather tanning industrial areas using spectrophotometric methods. The results showed elevated accumulation of total Cr ranging from 10.85 ± 0.885 mg/L to 39.696 ± 0.326 mg/L, 16.225 ± 0.12 mg/Kg to 1581.667 ± 0.122 mg/Kg, and 1.0758 ± 0.05348 mg/Kg to 11.75 ± 0.206 mg/Kg in water, agricultural soil, and vegetable samples, respectively. The highest levels of chromium (VI) found from the speciation study were 2.23 ± 0.032 mg/Kg and 0.322 ± 0.07 mg/L in soil and water samples, respectively, which decreased with distance from the tannery. Among the vegetables, the highest load of Cr(VI) was detected in onion root (0.048 ± 0.065 mg/Kg) and the lowest (0.004 ± 0.007 mg/Kg) in fruit of green pepper. The detected levels of Cr in all of the suggested samples were above the WHO permissible limits. The variations of the levels Cr(III) and Cr(VI) contamination of the environment with distance from the tannery were statistically significant ( p = 0.05). Similarly, significant difference in the levels of Cr among the tested vegetables was recorded. The levels increased with decreasing distance from the effluent channel.

  11. Seasonal variability of PM2.5 composition and sources in the Klang Valley urban-industrial environment

    Directory of Open Access Journals (Sweden)

    N. Amil

    2016-04-01

    Full Text Available This study investigates the fine particulate matter (PM2.5 variability in the Klang Valley urban-industrial environment. In total, 94 daily PM2.5 samples were collected during a 1-year campaign from August 2011 to July 2012. This is the first paper on PM2.5 mass, chemical composition and sources in the tropical environment of Southeast Asia, covering all four seasons (distinguished by the wind flow patterns including haze events. The samples were analysed for various inorganic components and black carbon (BC. The chemical compositions were statistically analysed and the temporal aerosol pattern (seasonal was characterised using descriptive analysis, correlation matrices, enrichment factor (EF, stoichiometric analysis and chemical mass closure (CMC. For source apportionment purposes, a combination of positive matrix factorisation (PMF and multi-linear regression (MLR was employed. Further, meteorological–gaseous parameters were incorporated into each analysis for improved assessment. In addition, secondary data of total suspended particulate (TSP and coarse particulate matter (PM10 sampled at the same location and time with this study (collected by Malaysian Meteorological Department were used for PM ratio assessment. The results showed that PM2.5 mass averaged at 28 ± 18 µg m−3, 2.8-fold higher than the World Health Organisation (WHO annual guideline. On a daily basis, the PM2.5 mass ranged between 6 and 118 µg m−3 with the daily WHO guideline exceeded 43 % of the time. The north-east (NE monsoon was the only season with less than 50 % sample exceedance of the daily WHO guideline. On an annual scale, PM2.5 mass correlated positively with temperature (T and wind speed (WS but negatively with relative humidity (RH. With the exception of NOx, the gases analysed (CO, NO2, NO and SO2 were found to significantly influence the PM2.5 mass. Seasonal variability unexpectedly showed that rainfall, WS and wind direction (WD did not

  12. Power industry and the environment IV. Natural gas; Energetika a zivotni prostredi IV. Zemni plyn

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-02-01

    A total of 26 contributions to the conference are presented, two of them in a Supplement. Seven contributions have been inputted in INIS, viz.: Natural gas: an environmentally friendly and energy saving fuel; Pollutants from the combustion of fuels; Consequences of increasing the consumption of gaseous fuels in national economy; Conversion of energy sources to gas consumption: effects on air quality; Experience of the Czech National Energy Inspectorate from the conversion of energy sources in the North-Bohemian region to gas fuel; Environmental consequences of gas fuel uses in towns; Natural gas: evaluation, control, and improvement of its environmental impacts; and Cogeneration units. (J.B.).

  13. EFFECTS OF HIGH ECONOMIC IMPORTANCE OF INDUSTRIAL BRANCHES ON HUMAN LIFE QUALITY AND ENVIRONMENT

    OpenAIRE

    Özarslan, Doguş Deniz; Cumbul Altay, Melek; Arabaci, Aliye; Altay, H. Fatih; Sivri, Nüket

    2012-01-01

    Importance of industrialization which has a role in determination of the civilization levels of societies is increasing everyday due to meet rapidly increasing demands. However this process has led up to environmental problems with time and thus effects on quality of human life also brought along. In this study, three sectors were selected among different branches of industry according to their economical importance in Turkey. These sectors are paper, metal and construction chemicals industry...

  14. Terrestrial Gamma Radiation Exposure Measurement and Risk Estimates in the Environments of Major Industries In Ota, Nigeria

    Directory of Open Access Journals (Sweden)

    Abodunrin Oluwasayo Peter

    2016-11-01

    Full Text Available When fast estimates are required, the in-situ method is more appropriate as this allows for quick results; preventing further exposure of the public and permitting quick intervention. Measurements of the terrestrial gamma radiation exposure have been carried out in the environments of major industries in Ota using a portable survey meter. The motivation for this study resulted from the uncertainty in the general public opinion on the effect of the presence, and activities of some of these industries in their environment. Measurements were taken twice daily within the vicinity of each industry to determine the dose levels. The mean values obtained range from 0.11 – 1.80 µSv/h. These values are within the results obtained from normal background areas except for site number 10. Annual effective dose values range from 0.25 – 5.21 mSv with a mean value of 1.21 mSv. Routine activities in some of these environments may have contributed significantly to the ambient natural background radiation resulting in high values as obtained in some of these locations. The total risks disparately estimated for cancer and genetic effects resulting from the results obtained range from 0.17 x 10-4 – 3.80 x 10-4 with a mean value of 0.94 x 10-4. These levels are within the range of the average annual risk for accidental death for all industries.

  15. A Sustainable Industry-Environment Model for the Identification of Urban Environmental Risk to Confront Air Pollution in Beijing, China

    Directory of Open Access Journals (Sweden)

    Guilin Gao

    2018-03-01

    Full Text Available In this study, an optimized industry-environment model is proposed for identifying environmental risk under uncertainties. The strategy associated with an emission-permit trading mechanism has been introduced into the industrial-environment regulation (model for remitting the pressures of frequent/severe haze events in Beijing City. A dual stochastic mixed fuzzy risk analysis method with Laplace’s criterion (DSFRL can be embedded into industry-environment issues with a trading emission-permit trading mechanism (IEST for handling uncertainties regarded as possibility and probability distributions. Meanwhile, this can also reflect the environmental risks and corresponding system benefits due to the occurrence of a random event (such as random wind velocity. Based on the application of the proposed IEST with DSFRL, the numbers of the obtained results associated with production reduction, adjustment of industrial layout pattern, emission-permit transactions, pollutant mitigation and system benefits under various Laplace criterion cases can be analyzed. A tradeoff between production development and pollution mitigation based on the preference of policymakers can be used for rectifying current strategies with a sustainable mode, which can prompt an effort to confront air pollution

  16. Modeling JP-8 Fuel Effects on Diesel Combustion Systems

    National Research Council Canada - National Science Library

    Schihl, Peter; Hoogterp, Laura; Pangilinan, Harold; Schwarz, Ernest; Bryzik, Walter

    2006-01-01

    .... Since engine manufacturers rely solely on DF-2 for commercial vehicle applications most domestic industry, university, and national laboratory lead diesel engine combustion system research activities...

  17. Space Station Freedom combustion research

    Science.gov (United States)

    Faeth, G. M.

    1992-01-01

    spread of liquids, drop combustion, and quenching of panicle-air flames. Unfortunately, the same features that make microgravity attractive for fundamental combustion experiments, introduce new fire and explosion hazards that have no counterpart on earth. For example, microgravity can cause broader flammability limits, novel regimes of flame spread, enhanced effects of flame radiation, slower fire detector response, and enhanced combustion upon injecting fire extinguishing agents, among others. On the other hand, spacecraft provide an opportunity to use 'fire-safe' atmospheres due to their controlled environment. Investigation of these problems is just beginning, with specific fire safety experiments supplementing the space based fundamental experiments listed earlier; thus, much remains to be done to develop an adequate technology base for fire and explosion safety considerations for spacecraft.

  18. Training of Industrial Sphere Managers in a Specially Organized Education Environment

    Science.gov (United States)

    Gorshenina, Margarita; Firsova, Elena

    2016-01-01

    The professional activity of industrial sphere managers has an integrated character and includes managerial, economic and production activity. Due to this the structure of readiness of industrial sphere managers for professional activity is composed of three components: subject, reflexive and technological ones. The objective of this paper…

  19. Up-date on cyclone combustion and cyclone boilers

    Energy Technology Data Exchange (ETDEWEB)

    Carmo, Felipe Alfaia do; Nogueira, Manoel Fernandes Martins; Rocha, Rodrigo Carnera Castro da; Gazel, Hussein Felix; Martins, Diego Henrique dos Reis [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Campus Universitario Jose da Silveira Netto], E-mails: mfmn@ufpa.br, mfmn@ufpa.br

    2010-07-01

    The boiler concept has been around for more than 70 years, and there are many types available. Boilers provide steam or hot water for industrial and commercial use. The Federal University of Para (UFPA) through the research group EBMA (Energy,Biomass and Environment) has been developing cyclonic furnace with a water wall, a boiler, aiming to use regional timbers (sawdust) and agro-industries residues as fuel to produce steam to be used in industrial processes as well as in power generation,. The use of cyclonic combustion for burning waste instead of burning in a fixed bed is mainly due to two factors efficiency improvement causing a more compact boiler and less risk of explosion, since their process does not generate an accumulation of volatile. Present state-of-art for commercial cyclone boilers has as set up a cyclone combustor with two combustion chambers, in fluid communication, where there ducts for supplying air and fuel directly into the first chamber and for forming a cyclonic flow pattern and a heat exchanger surrounding the second chamber for keeping low combustion temperature in both chambers. This paper shows the results of a literature review about design, construction and operation of cyclonic boilers using solid, liquid or gaseous fuel. This information has been used for the design of a cyclone boiler to be constructed at UFPA for research purposes and its basic concept is presented at the end of this article. (author)

  20. Recovery Act: Oxy-Combustion Technology Development for Industrial-Scale Boiler Applications. Task 4 - Testing in Alstom's 15 MWth Boiler Simulation Facility

    Energy Technology Data Exchange (ETDEWEB)

    Levasseur, Armand

    2014-04-30

    Alstom Power Inc. (Alstom), under U.S. DOE/NETL Cooperative Agreement No. DE-NT0005290, is conducting a development program to generate detailed technical information needed for application of oxy-combustion technology. The program is designed to provide the necessary information and understanding for the next step of large-scale commercial demonstration of oxy combustion in tangentially fired boilers and to accelerate the commercialization of this technology. The main project objectives include: Design and develop an innovative oxyfuel system for existing tangentially-fired boiler units that minimizes overall capital investment and operating costs; Evaluate performance of oxyfuel tangentially fired boiler systems in pilot scale tests at Alstom’s 15 MWth tangentially fired Boiler Simulation Facility (BSF); Address technical gaps for the design of oxyfuel commercial utility boilers by focused testing and improvement of engineering and simulation tools; Develop the design, performance and costs for a demonstration scale oxyfuel boiler and auxiliary systems; Develop the design and costs for both industrial and utility commercial scale reference oxyfuel boilers and auxiliary systems that are optimized for overall plant performance and cost; and, Define key design considerations and develop general guidelines for application of results to utility and different industrial applications. The project was initiated in October 2008 and the scope extended in 2010 under an ARRA award. The project is scheduled for completion by April 30, 2014. Central to the project is 15 MWth testing in the BSF, which provided in-depth understanding of oxy-combustion under boiler conditions, detailed data for improvement of design tools, and key information for application to commercial scale oxy-fired boiler design. Eight comprehensive 15 MWth oxy-fired test campaigns were performed with different coals, providing detailed data on combustion, emissions, and thermal behavior over a matrix of

  1. 75 FR 32142 - Combustible Dust

    Science.gov (United States)

    2010-06-07

    .... Contact Mat Chibbaro, P.E., Fire Protection Engineer, Office of Safety Systems, OSHA Directorate of..., and metals (such as aluminum and magnesium). Industries that may have combustible dust hazards include..., chemical manufacturing, textile manufacturing, furniture manufacturing, metal processing, fabricated metal...

  2. Application of a radiant heat transfer model to complex industrial reactive flows: combustion chambers, electric arcs; Application d`un modele de transfert radiatif a des ecoulements reactifs industriels complexes: chambres de combustion, arcs electriques

    Energy Technology Data Exchange (ETDEWEB)

    Mechitoua, N; Dalsecco, S; Delalondre, C; Simonin, O [Electricite de France (EDF), 78 - Chatou (France). Lab. National d` Hydraulique

    1997-12-31

    The direction of studies and researches (DER) of Electricite de France (EdF) has been involved for several years in a research program on turbulent reactive flows. The objectives of this program concern: the reduction of pollutant emissions from existing fossil-fueled power plants, the study of new production means (fluidized beds), and the promotion of electric power applications in the industry. An important part of this program is devoted to the development and validation of 3-D softwares and to the modeling of physical phenomena. This paper presents some industrial applications (furnaces, boilers, electric arcs) for which radiant heat transfers play an important role and the radiation models used. (J.S.) 8 refs.

  3. Application of a radiant heat transfer model to complex industrial reactive flows: combustion chambers, electric arcs; Application d`un modele de transfert radiatif a des ecoulements reactifs industriels complexes: chambres de combustion, arcs electriques

    Energy Technology Data Exchange (ETDEWEB)

    Mechitoua, N.; Dalsecco, S.; Delalondre, C.; Simonin, O. [Electricite de France (EDF), 78 - Chatou (France). Lab. National d`Hydraulique

    1996-12-31

    The direction of studies and researches (DER) of Electricite de France (EdF) has been involved for several years in a research program on turbulent reactive flows. The objectives of this program concern: the reduction of pollutant emissions from existing fossil-fueled power plants, the study of new production means (fluidized beds), and the promotion of electric power applications in the industry. An important part of this program is devoted to the development and validation of 3-D softwares and to the modeling of physical phenomena. This paper presents some industrial applications (furnaces, boilers, electric arcs) for which radiant heat transfers play an important role and the radiation models used. (J.S.) 8 refs.

  4. Simulation of sustainability aspects within the industrial environment and their implication on the simulation technique

    OpenAIRE

    Rabe, M.; Jäkel, F.-W.; Weinaug, H.

    2010-01-01

    Simulation is a broadly excepted analytic instrument and planning tool. Today, industrial simulation is mainly applied for engineering and physical purposes and covers a short time horizon compared to intergenerational justice. In parallel, sustainability is gaining more importance for the industrial planning because themes like global warming, child labour, and compliance with social and environmental standards have to be taken into account. Sustainability is characterized by comprehensively...

  5. Indemnification of damage to the environment caused by non-nuclear industrial activities

    International Nuclear Information System (INIS)

    Smets, H.

    1985-01-01

    Environmental damage has reached catastrophic proportions, implying the death of hundreds of people or expenses of many hundreds of million dollars. The financial impact of this damage is however small at the level of the industrial sector concerned which could bear its costs. If States would take measures to redistribute such costs, they would avoid having to compensate victims of the gravest accidents. Special procedures were introduced for this purpose in certain industrial sectors. (NEA) [fr

  6. How Corporate Cultures Coevolve with the Business Environment: The Case of Firm Growth Crises and Industry Evolution

    OpenAIRE

    Christian Cordes; Peter J. Richerson; Georg Schwesinger

    2010-01-01

    International audience; This paper shows how cognitive human dispositions that take effect at the level of an individual firm's corporate culture have repercussions on an industry's evolution. In our theory, the latter is attributable to evolving corporate cultures coupled with changes in a firm's business environment. With the help of a formal model of evolving corporate cultures, we demonstrate how firms can establish a cooperative cultural regime that yields competitive advantages in an in...

  7. Study of the radionuclides contained in wastes produced by the phosphate industry and their impact on the environment

    International Nuclear Information System (INIS)

    Baetsle, L.H.

    1991-01-01

    This report reviews the present state of the management and disposal of waste associated with mining, milling and reprocessing of phosphate ores with regard to its content on naturally occurring radionuclides. The main areas of investigation are: phosphate ores and their characteristics and phosphate trade in the Member States of the European Community, production and processing methods of phosphoric acids and phosphates, interaction of phosphate products and wastes with the environment, standards and regulations for radioactivity released during processing in the phosphate industry

  8. Improving the Psychosocial Work Environment at Multi-Ethnic Workplaces: A Multi-Component Intervention Strategy in the Cleaning Industry

    OpenAIRE

    Smith, Louise Hardman; Hviid, Kirsten; Frydendall, Karen Bo; Flyvholm, Mari-Ann

    2013-01-01

    Global labour migration has increased in recent years and immigrant workers are often recruited into low status and low paid jobs such as cleaning. Research in a Danish context shows that immigrants working in the cleaning industry often form social networks based on shared languages and backgrounds, and that conflict between different ethnic groups may occur. This paper evaluates the impact of a multi-component intervention on the psychosocial work environment at a multi-ethnic Danish workpl...

  9. Influence of forest biomass grown in fertilised soils on combustion and gasification processes as well as on the environment with integrated bioenergy production

    Energy Technology Data Exchange (ETDEWEB)

    Jaanu, K; Orjala, M [VTT Energy, Jyvaeskylae (Finland). Fuel Production

    1997-12-01

    This presentation describes research carried out by VTT Energy and METLA during 1996, as part of the collaborative EU project involving Finland, Portugal and Spain. The main objectives of this project are to carry out experimental studies of both combustion and gasification under atmospheric (Portugal and Spain) and pressurised conditions (Finland) using biomass from different countries, namely Finland, Portugal and Spain. This was to determine the influence of biomass fertilising conditions on the process itself and the impact on the integrated energy production facilities, such as gas turbines. The aim of the research was carried out during 1996: (1) To complete the biomass collection, analyses and selection of the samples for combustion and gasification tests. This task has been carried out in co-operation with VTT and METLA, (2) To start the combustion and gasification tests under pressurised and atmospheric conditions. The combustion research in Finland is being performed in pressurised entrained flow reactor at VTT in Jyvaeskylae and the gasification research is being conducted at VTT in Espoo. The collection of biomass samples has been completed. The analyses of the samples show that for instance potassium and phosphorus content will be increased by about 30-50 % due to fertilisation. In the ash fusion tests, the ash from fertilised bark and branches and needles may start to soften already at 900 deg C under reducing conditions depending on the composition of the ash. In oxidising atmospheres the ash softening seems to occur at higher temperatures. Preliminary results indicate that the fertilisation may have an influence on the combustion process

  10. Energy industry

    Science.gov (United States)

    Staszak, Katarzyna; Wieszczycka, Karolina

    2018-04-01

    The potential sources of metals from energy industries are discussed. The discussion is organized based on two main metal-contains wastes from power plants: ashes, slags from combustion process and spent catalysts from selective catalytic NOx reduction process with ammonia, known as SCR. The compositions, methods of metals recovery, based mainly on leaching process, and their further application are presented. Solid coal combustion wastes are sources of various compounds such as silica, alumina, iron oxide, and calcium. In the case of the spent SCR catalysts mainly two metals are considered: vanadium and tungsten - basic components of industrial ones.

  11. Proceedings of the 1999 international joint power generation conference (FACT-vol. 23). Volume 1: Fuels and combustion technologies; Gas turbines; and Nuclear engineering

    International Nuclear Information System (INIS)

    Penfield, S.R. Jr.; Moussa, N.A.

    1999-01-01

    Papers are arranged under the following topical sections: Gas turbine combustion; Advanced energy conversion; Low NOx solutions; Burner developments; Alternative fuels combustion; Advanced energy conversion technologies; Numerical modeling of combustion; Fluidized bed combustion; Coal combustion; Combustion research; Gasification systems; Mercury emissions; Highly preheated air combustion; Selective catalytic reduction; Special topics in combustion research; Gas turbines and advanced energy; and How can the nuclear industry become more efficient? Papers within scope have been processed separately for inclusion on the database

  12. Industrial electrification

    International Nuclear Information System (INIS)

    Melvin, J.G.

    1983-03-01

    The technical and economic scope for industrial process electrification in Canada is assessed in the light of increasing costs of combustion fuels relative to electricity. It is concluded that electricity is capable of providing an increasing share of industrial energy, eventually aproaching 100 percent. The relatively low cost of electricity in Canada offers industry the opportunity of a head start in process electrification with consequent advantages in world markets both for industrial products and for electrical process equipment and technology. A method is described to promote the necessary innovation by providing access to technology and financing. The potential growth of electricity demand due to industrial electrification is estimated

  13. Combustion Byproducts Recycling Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Ziemkiewicz, Paul; Vandivort, Tamara; Pflughoeft-Hassett, Debra; Chugh, Y Paul; Hower, James

    2008-08-31

    Each year, over 100 million tons of solid byproducts are produced by coal-burning electric utilities in the United States. Annual production of flue gas desulfurization (FGD) byproducts continues to increase as the result of more stringent sulfur emission restrictions. In addition, stricter limits on NOx emissions mandated by the 1990 Clean Air Act have resulted in utility burner/boiler modifications that frequently yield higher carbon concentrations in fly ash, which restricts the use of the ash as a cement replacement. Controlling ammonia in ash is also of concern. If newer, “clean coal” combustion and gasification technologies are adopted, their byproducts may also present a management challenge. The objective of the Combustion Byproducts Recycling Consortium (CBRC) is to develop and demonstrate technologies to address issues related to the recycling of byproducts associated with coal combustion processes. A goal of CBRC is that these technologies, by the year 2010, will lead to an overall ash utilization rate from the current 34% to 50% by such measures as increasing the current rate of FGD byproduct use and increasing in the number of uses considered “allowable” under state regulations. Another issue of interest to the CBRC would be to examine the environmental impact of both byproduct utilization and disposal. No byproduct utilization technology is likely to be adopted by industry unless it is more cost-effective than landfilling. Therefore, it is extremely important that the utility industry provide guidance to the R&D program. Government agencies and privatesector organizations that may be able to utilize these materials in the conduct of their missions should also provide input. The CBRC will serve as an effective vehicle for acquiring and maintaining guidance from these diverse organizations so that the proper balance in the R&D program is achieved.

  14. High Combustion Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — At NETL's High-Pressure Combustion Research Facility in Morgantown, WV, researchers can investigate new high-pressure, high-temperature hydrogen turbine combustion...

  15. Combustion Research Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Combustion Research Laboratory facilitates the development of new combustion systems or improves the operation of existing systems to meet the Army's mission for...

  16. Climate Variability and Industrial-Suburban Heat Environment in a Mediterranean Area

    Directory of Open Access Journals (Sweden)

    Giuseppina A. Giorgio

    2017-05-01

    Full Text Available The Urban Heat Island (UHI phenomenon prevalently concerns industrialized countries. It consists of a significant increase in temperatures, especially in industrialized and urbanized areas, in particular, during extreme warm periods like summer. This paper explores the climate variability of temperatures in two stations located in Matera city (Southern Italy, evaluating the increase in temperatures from 1988 to 2015. Moreover, the Corine Land Covers (1990–2000–2006–2012 were used in order to investigate the effect of land use on temperatures. The results obtained confirm the prevalence of UHI phenomena for industrialized areas, highlighting the proposal that the spreading of settlements may further drive these effects on the microclimate. In particular, the presence of industrial structures, even in rural areas, shows a clear increase in summer maximum temperatures. This does not occur in the period before 2000, probably due to the absence of the industrial settlement. On the contrary, from 2000 to 2015, changes are not relevant, but the maximum temperatures have always been higher than in the suburban area (station localized in green zone during daylight hours.

  17. Evaluation Strategy Michael Porter's five forces model of the competitive environment on the dairy industry (Case Study: Amoll Haraz Dvshh dairy company)

    OpenAIRE

    Mohammad Bolorian Tehrani; Faezeh Rahmani

    2016-01-01

    State of competition in an industry depends on five basic forces. Porter's five forces model including bargaining power of customers, bargaining power of suppliers, threat of newcomers to the industry, threat of substitute products is the intensity of rivalry between competitors. Joint strength of these forces determines the ultimate benefit of potentially any industry. The purpose of this study was to evaluate the competitive environment of the dairy industry based on Michael Por...

  18. Rethinking the contractual context for Building Information Modelling (BIM in the Australian built environment industry

    Directory of Open Access Journals (Sweden)

    Ilsa Kuiper

    2013-12-01

    Full Text Available Building Information Modelling (BIM can be defined as a process of generating and managing information of a building or infrastructure during its life cycle. Whilst the 3D visualisation or dimensional functions of BIM are not necessarily new, it is the usage and integration of this information related to project delivery, management and performance analysis that are challenging current construction industry practices.  Industry has called for the development of more collaborative and integrated contractual arrangements to facilitate the use of BIM. Such recommendations appeal to the ideal use of BIM, but also provide a potential opportunity to seek improvement within the construction industry. This paper proposes a procurement approach to BIM to establish the applicable contractual context to address the potential legal risks and commercial considerations, relative to current practices in Australia. It als ooutlines why BIM, with other enabling technologies, will drive the evolution of contract delivery methodologies.

  19. Combustion chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Brown, N.J. [Lawrence Berkeley Laboratory, CA (United States)

    1993-12-01

    This research is concerned with the development and use of sensitivity analysis tools to probe the response of dependent variables to model input variables. Sensitivity analysis is important at all levels of combustion modeling. This group`s research continues to be focused on elucidating the interrelationship between features in the underlying potential energy surface (obtained from ab initio quantum chemistry calculations) and their responses in the quantum dynamics, e.g., reactive transition probabilities, cross sections, and thermal rate coefficients. The goals of this research are: (i) to provide feedback information to quantum chemists in their potential surface refinement efforts, and (ii) to gain a better understanding of how various regions in the potential influence the dynamics. These investigations are carried out with the methodology of quantum functional sensitivity analysis (QFSA).

  20. Assessment for feasibility and pricing of wheeling transactions under deregulated environment of power industry

    International Nuclear Information System (INIS)

    Yog Raj Sood; Narayana Prasad Padhy; Hari Om Gupta

    2004-01-01

    Many transactions of electrical power are expected to take place due to deregulation of electrical power industry. It is important for independent power producers, independent system operator and bulk power consumers (load centers) to know and select the least cost transaction among all the feasible transactions. In this paper, selection of best possible wheeling transaction in a deregulated power system has been determined based on available transfer capability and short run marginal cost. The proposed algorithm has been tested and analyzed for IEEE-30 bus test system and hence applied to South African power industry, the results so obtained are found to be of very much practical use. (author)

  1. The combustion of sodium

    International Nuclear Information System (INIS)

    Newman, R.N.

    1978-01-01

    The burning rates of sodium in the form of vapour jets, droplets, sprays and unconfined and confined pools have been reviewed. Attention has been paid to assessing the value of models in the various combustion modes. Additional models have been constructed for the descriptions of laminar and turbulent vapour jets, stationary droplets, forced convection over ambient pool fires together with correlations for peak pressures in confined pool environments. Where appropriate experiments with sodium have not been conducted, the likely behaviour is predicted by comparison with the burning of other fuels, particularly in the field of large free ambient fires. Some areas where further knowledge is required are highlighted. (author)

  2. Padrões de industrialização, riscos e meio ambiente Patterns of industrialization risks and environment

    Directory of Open Access Journals (Sweden)

    Tânia Franco

    1998-01-01

    Full Text Available Este artigo aborda a questão dos riscos industriais e de seus impactos sobre a saúde e o meio ambiente, buscando fazer uma retrospectiva histórica acerca da formação dos atuais padrões de trabalho, produção e consumo nas sociedades ocidentais contemporâneas. Neste percurso, salienta desafios e dilemas emergentes nas últimas décadas com os avanços da globalização da economia, da reestruturação produtiva e das formas de gestão do trabalho viabilizadas pela adoção de políticas neoliberais. Focaliza a historicidade da relação entre riscos industriais e meio ambiente e apresenta resultados de pesquisa que dizem respeito à mobilidade dos riscos e acidentes industriais no espaço socioeconômico-ambiental da Região Metropolitana de Salvador, resgatando aspectos concernentes às formas de gestão industrial e de organização do trabalho, com destaque para a terceirização.This article deals with industrial risks and its effects on health and environment, in a retrospective historical analysis of the creation of present patterns of work, production and consumption in contemporary western societies. Challenges and emerging dilemas from the few past decades are highligted and discussed by the authors in terms of economic globalization, productive restructuring and work management strategies conducted by neoliberal policies. The article focus on the relationship between industrial risks and environment and present research data on morbidity and risks related to industrial accidents in the social-economical-environmental space of the Metropolitan area of Salvador, Bahia, Brazil. In doing so, concerns on industrial management and labour organization are highligted.

  3. Oxyfuel combustion for below zero CO{sub 2} emissions

    Energy Technology Data Exchange (ETDEWEB)

    Boeg Toftegaard, M; Hansen, Kim G; Fisker, D [DONG Energy Power, Hvidovre (Denmark); Brix, J; Brun Hansen, B; Putluru, S S.R.; Jensen, Peter Arendt; Glarborg, Peter; Degn Jensen, A [Technical Univ. of Denmark. CHEC Research Centre, Kgs. Lyngby (Denmark); Montgomery, M [Technical Univ. of Denmark. DTU Mechanical Engineering, Kgs. Lyngby (Denmark)

    2011-07-01

    The reduction of CO{sub 2} emissions is of highest concern in relation to limiting the anthropogenic impacts on the environment. Primary focus has gathered on the large point sources of CO{sub 2} emissions constituted by large heat and power stations and other heavy, energy-consuming industry. Solutions are sought which will enable a significant reduction of the anthropogenic CO{sub 2} emissions during the transformation period from the use of fossil fuels to renewable sources of energy. Carbon capture and storage (CCS) has the potential to significantly reduce CO{sub 2} emissions from power stations while allowing for the continuous utilisation of the existing energy producing system in the transformation period. Oxyfuel combustion is one of the possible CCS technologies which show promising perspectives for implementation in industrial scale within a relatively short period of time. Oxyfuel combustion deviates from conventional combustion in air by using a mixture of pure oxygen and recirculated flue gas as the combustion medium thereby creating a flue gas highly concentrated in CO{sub 2} making the capture process economically more feasible compared to technologies with capture from more dilute CO{sub 2} streams. This project has investigated a number of the fundamental and practical issues of the oxyfuel combustion process by experimental, theoretical, and modelling investigations in order to improve the knowledge of the technology. The subjects investigated cover: general combustion characteristics of coal and biomass (straw) and mixtures thereof, formation and emission of pollutants, ash characteristics, flue gas cleaning for SO{sub 2} by wet scrubbing with limestone and for NO{sub x} by selective catalytic reduction (SCR), corrosion of boiler heat transfer surfaces, operation and control of large suspension-fired boilers, and the perspectives for the implementation of oxyfuel combustion s a CO{sub 2} sequestration solution in the Danish power production

  4. Molecular dynamics study of combustion reactions in supercritical environment. Part 1: Carbon dioxide and water force field parameters refitting and critical isotherms of binary mixtures

    International Nuclear Information System (INIS)

    Masunov, Artem E.; Atlanov, Arseniy Alekseyevich; Vasu, Subith S.

    2016-01-01

    Oxy-fuel combustion process is expected to drastically increase the energy efficiency and enable easy carbon sequestration. In this technology the combustion products (carbon dioxide and water) are used to control the temperature and nitrogen is excluded from the combustion chamber, so that nitrogen oxide pollutants do not form. Therefore, in oxycombustion the carbon dioxide and water are present in large concentrations in their transcritical state, and may play an important role in kinetics. The computational chemistry methods may assist in understanding these effects, and Molecular Dynamics with ReaxFF force field seem to be a suitable tool for such a study. Here we investigate applicability of the ReaxFF to describe the critical phenomena in carbon dioxide and water and find that several nonbonding parameters need adjustment. We report the new parameter set, capable to reproduce the critical temperatures and pressures. Furthermore, the critical isotherms of CO 2 /H 2 O binary mixtures are computationally studied here for the first time and their critical parameters are reported.

  5. Chameleons in Marketspace: Industry Transformation in the New Electronic Marketing Environment.

    Science.gov (United States)

    Pattinson, Hugh; Brown, Linden

    1996-01-01

    Discusses the new information infrastructure and its possible influences on marketing. Highlights include an alternative perspective of industrial economic history based on infrastructure development; the Internet and its positioning within the new information infrastructure; future possibilities and impacts on organizational structure; and…

  6. Deliberations on nuclear safety regulatory system in a changing industrial environment

    International Nuclear Information System (INIS)

    Kim, H.J.

    2001-01-01

    Nuclear safety concern, which may accompany such external environmental factors as privatization and restructuring of the electric power industry, is emerging as an international issue. In order to cope with the concern about nuclear safety, it is important to feedback valuable experiences of advanced countries that restructured their electric power industries earlier and further to reflect the current safety issues, which are raised internationally, fully into the nuclear safety regulatory system. This paper is to review the safety issues that might take place in the process of increasing competition in the nuclear power industry, and further to present a basic direction and effective measures for ensuring nuclear safety in response thereto from the viewpoint of safety regulation. It includes a political direction for a regulatory body's efforts to rationalize and enforce efficiently its regulation. It proposes to ensure that regulatory specialty and regulatory cost are stably secured. Also, this paper proposes maintaining a sound nuclear safety regulatory system to monitor thoroughly the safety management activities of the industry, which might be neglected as a result of focusing on reduction of the cost for producing electric power. (author)

  7. Economic consequences of the energy-environment-initiative on industry and services

    International Nuclear Information System (INIS)

    Muggli, C.; Baumgartner, W.; Rethage, S.

    1996-10-01

    The report investigates the effects of the energy environmental initiative on industry and, in certain aspects, for the service sector. Included further are some remarks for its execution. The proposed form was partly tested against 'alternative' solutions. (author) figs., tabs., refs

  8. Radioactive waste: the Nuclear Industry's response to the Environment Committee's report

    International Nuclear Information System (INIS)

    1986-07-01

    This paper represents the nuclear industry's response to the Environmental Committee's report on the handling and disposal of radioactive wastes. Topics covered include the historical aspects of the management of radioactive wastes, technical problems, comparisons with overseas management methods, liquid effluents, reprocessing problems, and public attitudes and perceptions of radioactive waste. Responses to the Environmental Committee's recommendations form an appendix. (U.K.)

  9. Metal-bearing fine particle sources in a coastal industrialized environment

    Czech Academy of Sciences Publication Activity Database

    Mbengue, Saliou; Alleman, L. Y.; Flament, P.

    2017-01-01

    Roč. 183, jan (2017), s. 202-211 ISSN 0169-8095 Institutional support: RVO:67179843 Keywords : PM2.5 * Trace elements * Industrial emissions * Sources apportionment Subject RIV: EH - Ecology, Behaviour OBOR OECD: Environmental sciences (social aspects to be 5.7) Impact factor: 3.778, year: 2016

  10. Workshop on Indian Chemical Industry: perspectives on safety, cleaner production and environment production

    NARCIS (Netherlands)

    Ham, J.M.

    1996-01-01

    A Workshop on "Indian Chemical Industry: Perspectives on Safety, Cleaner Production and Environmental Protection" was held on 3, 4 and 5 January 1996, in Bombay, India. The main objective of the workshop, which was organised jointly by the Government of India, UNIDO/UNDP and the Indian Chemical

  11. Complementary person-environment fit as a predictor of job pursuit intentions in the service industry

    OpenAIRE

    Bednarska, Marlena A.

    2016-01-01

    There is an intrinsic link between the success of service firms and the availability of appropriate labor resources, making employee attraction and retention a critical concern for service organizations. Effects of recruitment efforts are influenced by applicants' subjective person-environment (P-E) fit, referring to the compatibility between an individual and a work environment. The purpose of this paper is to examine the role of employer attractiveness in the relationship between potential ...

  12. 40 CFR 74.16 - Application requirements for combustion sources.

    Science.gov (United States)

    2010-07-01

    ... combustion sources. 74.16 Section 74.16 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... for combustion sources. (a) Opt-in permit application. Each complete opt-in permit application for a combustion source shall contain the following elements in a format prescribed by the Administrator: (1...

  13. New technologies reducing emissions from combustion of biofuels

    International Nuclear Information System (INIS)

    Oravainen, H.

    1997-01-01

    In reducing CO 2 emissions, bioenergy will be the most important source of renewable energy in the next few decades. In principle, combustion of biomass is friendly to the environment because CO 2 released during combustion is recycled back into natural circulation. Biofuels normally contain little nitrogen and sulphur. However, depending on the combustion technology used, emissions may be quite high. This is true of combustion of biomass fuels in small appliances like wood stoves, fireplaces, small boilers etc. When fuels having high content of volatile matter are burnt in appliances using batch type combustion, the process is rather an unsteady-state combustion. Emissions of carbon monoxide, other combustible gases and particulates are quite difficult to avoid. With continuous combustion processes this is not normally a problem. This conference paper presents some means of reducing emissions from combustion of biofuels. 5 refs., 4 figs

  14. Techniques de combustion Combustin Techniques

    Directory of Open Access Journals (Sweden)

    Perthuis E.

    2006-11-01

    Full Text Available L'efficacité d'un processus de chauffage par flamme est étroitement liée à la maîtrise des techniques de combustion. Le brûleur, organe essentiel de l'équipement de chauffe, doit d'une part assurer une combustion complète pour utiliser au mieux l'énergie potentielle du combustible et, d'autre part, provoquer dans le foyer les conditions aérodynamiques les plus propices oux transferts de chaleur. En s'appuyant sur les études expérimentales effectuées à la Fondation de Recherches Internationales sur les Flammes (FRIF, au Groupe d'Étude des Flammes de Gaz Naturel (GEFGN et à l'Institut Français du Pétrole (IFP et sur des réalisations industrielles, on présente les propriétés essentielles des flammes de diffusion aux combustibles liquides et gazeux obtenues avec ou sans mise en rotation des fluides, et leurs répercussions sur les transferts thermiques. La recherche des températures de combustion élevées conduit à envisager la marche à excès d'air réduit, le réchauffage de l'air ou son enrichissement à l'oxygène. Par quelques exemples, on évoque l'influence de ces paramètres d'exploitation sur l'économie possible en combustible. The efficiency of a flame heating process is closely linked ta the mastery of, combustion techniques. The burner, an essential element in any heating equipment, must provide complete combustion sa as to make optimum use of the potential energy in the fuel while, at the same time, creating the most suitable conditions for heat transfers in the combustion chamber. On the basis of experimental research performed by FRIF, GEFGN and IFP and of industrial achievements, this article describesthe essential properties of diffusion flames fed by liquid and gaseous fuels and produced with or without fluid swirling, and the effects of such flames on heat transfers. The search for high combustion temperatures means that consideration must be given to operating with reduced excess air, heating the air or

  15. Rotary combustion device

    NARCIS (Netherlands)

    2008-01-01

    Rotary combustion device (1) with rotary combustion chamber (4). Specific measures are taken to provide ignition of a combustible mixture. It is proposed that a hollow tube be provided coaxially with the axis of rotation (6), so that a small part of the mixture is guided into the combustion chamber.

  16. Development of an activatable nanospheres tracer for use in industry and the environment

    International Nuclear Information System (INIS)

    Fonseca, Raquel Luiza M.; Moreira, Rubens M.; Moura, Igor Felipe S.

    2015-01-01

    Nanoparticles (NP's) can act as tracers for the study of several transport phenomena in industrial practice and environmental processes provided their physical and chemical properties meet specific requirements dictated by the application. Silica-coated gold nanoparticles in the size interval from 20 to 200 nm can be produced by gamma-ray irradiation. Submitted to neutron bombardment in a nuclear reactor, they will convert gold nuclides into 198 Au (E γ = 412 keV). These NP's can used as a tracer in oil fields, in petrochemical and refinery industrial processes in which conventional organic radioactive labeled compounds would not withstand, as well as in some hydrology and hydrogeology studies. (author)

  17. Flexible Wi-Fi Communication among Mobile Robots in Indoor Industrial Environments

    Directory of Open Access Journals (Sweden)

    Jetmir Haxhibeqiri

    2018-01-01

    Full Text Available In order to speed up industrial processes and to improve logistics, mobile robots are getting important in industry. In this paper, we propose a flexible and configurable architecture for the mobile node that is able to operate in different network topology scenarios. The proposed solution is able to operate in presence of network infrastructure, in ad hoc mode only, or to use both possibilities. In case of mixed architecture, mesh capabilities will enable coverage problem detection and overcoming. The solution is based on real requirements from an automated guided vehicle producer. First, we evaluate the overhead introduced by our solution. Since the mobile robot communication relies in broadcast traffic, the broadcast scalability in mesh network is evaluated too. Finally, through experiments on a wireless testbed for a variety of scenarios, we analyze the impact of roaming, mobility and traffic separation, and demonstrate the advantage of our approach in handling coverage problems.

  18. The radiological environment impact in China's nuclear industry over past 30 years

    International Nuclear Information System (INIS)

    Pan Ziqiang; Wang Zhipo; Chen Zhuzhou; Xie Jianlun

    1989-01-01

    This paper describes the methodology and main results of radiological environmental impacts of nuclear industry in China over the past 30 years. Generally speaking, the environmental impacts of Chinese nuclear industry are very small. The radiation doses to the critical group around the nuclear facilities are less than 5 mSv/a, of which 77.1 percent of the unit years are less than 0.25 mSv/a. The total annaul collective dose to the residents around nuclear facilities within 80 km is less than 1/10,000 of collective dose from natural radiation in the same areas. The collective dose from uranium mines and mills is much higher than that from other nuclear facilities, and is about 91.5% of the collective dose from the entire nuclear fuel cycle

  19. Delivering on Industry Equipment Reliability Goals By Leveraging an Integration Platform and Decision Support Environment

    International Nuclear Information System (INIS)

    Coveney, Maureen K.; Bailey, W. Henry; Parkinson, William

    2004-01-01

    Utilities have invested in many costly enterprise systems - computerized maintenance management systems, document management systems, enterprise grade portals, to name but a few - and often very specialized systems, like data historians, high end diagnostic systems, and other focused and point solutions. From recent industry reports, we now know that the average nuclear power utilizes on average 1900 systems to perform daily work, of which 250 might facilitate the equipment reliability decision-making process. The time has come to leverage the investment in these systems by providing a common platform for integration and decision-making that will further the collective industry aim of enhancing the reliability of our nuclear generation assets to maintain high plant availability and to deliver on plant life extension goals without requiring additional large scale investment in IT infrastructure. (authors)

  20. First Biomass Conference of the Americas: Energy, environment, agriculture, and industry. Proceedings, Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    This conference was designed to provide a national and international forum to support the development of a viable biomass industry. Although papers on research activities and technologies under development that address industry problems comprised part of this conference, an effort was made to focus on scale-up and demonstration projects, technology transfer to end users, and commercial applications of biomass and wastes. The conference was divided into these major subject areas: Resource Base, Power Production, Transportation Fuels, Chemicals and Products, Environmental Issues, Commercializing Biomass Projects, Biomass Energy System Studies, and Biomass in Latin America. The papers in this second volume cover Transportation Fuels, and Chemicals and Products. Transportation Fuels topics include: Biodiesel, Pyrolytic Liquids, Ethanol, Methanol and Ethers, and Commercialization. The Chemicals and Products section includes specific topics in: Research, Technology Transfer, and Commercial Systems. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  1. Metal-containing residues from industry and in the environment: geobiotechnological urban mining.

    Science.gov (United States)

    Glombitza, Franz; Reichel, Susan

    2014-01-01

    This chapter explains the manifold geobiotechnological possibilities to separate industrial valuable metals from various industrial residues and stored waste products of the past. In addition to an overview of the different microbially catalyzed chemical reactions applicable for a separation of metals and details of published studies, results of many individual investigations from various research projects are described. These concern the separation of rare earth elements from phosphorous production slags, the attempts of tin leaching from mining flotation residues, the separation of metals from spent catalysts, or the treatment of ashes as valuable metal-containing material. The residues of environmental technologies are integrated into this overview as well. The description of the different known microbial processes offers starting points for suitable and new technologies. In addition to the application of chemolithoautotrophic microorganisms the use of heterotrophic microorganisms is explained.

  2. First biomass conference of the Americas: Energy, environment, agriculture, and industry. Proceedings, Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    This conference was designed to provide a national and international forum to support the development of a viable biomass industry. Although papers on research activities and technologies under development that address industry problems comprised part of this conference, an effort was made to focus on scale-up and demonstration projects, technology transfer to end users, and commercial applications of biomass and wastes. The conference was divided into these major subject areas: Resource Base, Power Production, Transportation Fuels, Chemicals and Products, Environmental Issues, Commercializing Biomass Projects, Biomass Energy System Studies, and Biomass in Latin America. The papers in this third volume deal with Environmental Issues, Biomass Energy System Studies, and Biomass in Latin America. Concerning Environmental Issues, the following topics are emphasized: Global Climate Change, Biomass Utilization, Biofuel Test Procedures, and Commercialization of Biomass Products. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  3. Structuring Requirements in a Multi-Project Environment in the Construction Industry

    DEFF Research Database (Denmark)

    Wörösch, Michael

    2012-01-01

    Being in control of requirements in building projects is vital, since it helps securing the often small profit margins and the reputation of the responsible company. Hence this research aims to introduce requirements management to the construction industry. By means of case study and action...... in this industry, yet, success is here defined as an accomplished and accepted implementation of requirements management processes that are used by the relevant project members in their daily work and where the benefits of implementing requirements management outweighs the cost of invested resources. Furthermore...... it is argued that when running technology development, product development, product platform development, and a portfolio of building projects at the same time the use of requirements management is advantageous and an intelligent way of structuring requirements is needed. This article also demonstrates...

  4. Using system dynamics for simulation and optimization of one coal industry system under fuzzy environment

    Energy Technology Data Exchange (ETDEWEB)

    Xu, J.P.; Li, X.F. [Sichuan University, Chengdu (China)

    2011-09-15

    In this paper, we have developed a model that integrates system dynamics with fuzzy multiple objective programming (SD-FMOP). This model can be used to study the complex interactions in a industry system. In the process of confirming sensitive parameters and fuzzy variables of the SD model, we made use of fuzzy multi-objective programming to help yield the solution. We adopted the chance-constraint programming model to convert the fuzzy variables into precise values. We use genetic algorithm to solve FMOP model, and obtain the Pareto solution through the programming models. It is evident that FMOP is effective in optimizing the given system to obtain the decision objectives of the SD model. The results recorded from the SD model are in our option, reasonable and credible. These results may help governments to establish more effective policy related to the coal industry development.

  5. Case studies of the use of biometrics technologies to reduce fraud in governmental and industrial environments

    Science.gov (United States)

    Bordes, Roy N.

    1998-12-01

    The purpose of this presentation is to enlighten the reader on the advancements that have been made in the field of biometrics technology as it relates to government and industrial-type applications. The term 'biometrics' is defined as, 'Any technology that uses electronically scanned graphical information for identification purposes.' Biometric technology was for a long time in the experimental stages, with many BETA test projects that were really not applicable to industrial markets. During the course of this presentation, we will show that biometrics applications do work, can develop positive returns on investment, but from a security standpoint have some major application problems that still need to be overcome. We will also address which biometric technologies have a better future in the security world than others.

  6. First biomass conference of the Americas: Energy, environment, agriculture, and industry

    International Nuclear Information System (INIS)

    1993-01-01

    This conference was designed to provide a national and international forum to support the development of a viable biomass industry. Although papers on research activities and technologies under development that address industry problems comprised part of this conference, an effort was made to focus on scale-up and demonstration projects, technology transfer to end users, and commercial applications of biomass and wastes. The conference was divided into these major subject areas: Resource Base, Power Production, Transportation Fuels, Chemicals and Products, Environmental Issues, Commercializing Biomass Projects, Biomass Energy System Studies, and Biomass in Latin America. The papers in this third volume deal with Environmental Issues, Biomass Energy System Studies, and Biomass in Latin America. Concerning Environmental Issues, the following topics are emphasized: Global Climate Change, Biomass Utilization, Biofuel Test Procedures, and Commercialization of Biomass Products. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database

  7. Development of an activatable nanospheres tracer for use in industry and the environment

    Energy Technology Data Exchange (ETDEWEB)

    Fonseca, Raquel Luiza M.; Moreira, Rubens M., E-mail: rlmf@cdtn.br, E-mail: rubens@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (SEMAM/CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Departamento de Servico ao Meio Ambiente; Moura, Igor Felipe S., E-mail: igorfelipedx@yahoo.com.br [Universidade Federal de Minas Gerais (DEN/PCTN/UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear. Programa de Pos-Graduacao em Ciencias e Tecnicas Nucleares

    2015-07-01

    Nanoparticles (NP's) can act as tracers for the study of several transport phenomena in industrial practice and environmental processes provided their physical and chemical properties meet specific requirements dictated by the application. Silica-coated gold nanoparticles in the size interval from 20 to 200 nm can be produced by gamma-ray irradiation. Submitted to neutron bombardment in a nuclear reactor, they will convert gold nuclides into {sup 198}Au (E{sub γ} = 412 keV). These NP's can used as a tracer in oil fields, in petrochemical and refinery industrial processes in which conventional organic radioactive labeled compounds would not withstand, as well as in some hydrology and hydrogeology studies. (author)

  8. An Analysis of China's Fertilizer Policies: Impacts on the Industry, Food Security, and the Environment.

    Science.gov (United States)

    Li, Yuxuan; Zhang, Weifeng; Ma, Lin; Huang, Gaoqiang; Oenema, Oene; Zhang, Fusuo; Dou, Zhengxia

    2013-07-01

    China has made remarkable strides in recent decades to grow enough food to feed 20% of the world's population with only 9% of the world's arable land. Meanwhile, the nation is experiencing exacerbated air and water pollution problems. Agricultural growth and the pollution aggravation are closely linked with policies affecting fertilizer production and use. Essentially nonexistent in 1950, China's fertilizer industry is now a robust conglomerate producing fertilizers in amounts that not only meet domestic demand but also contribute to international trade. The industry's growth stemmed from a series of policy progressions, featuring (i) a total control system with state ownership and central planning (1949-1984), (ii) a dual system of central planning and market adjustment (1985-1997), (iii) a market-driven system with government-mandated price caps (1998-2009), and (iv) a complete market-oriented system (since 2009). In conjunction with the policy changes were massive subsidy programs totaling more than $18 billion in 2010. The support policies and subsidies helped grow the industry and safeguard an adequate supply of fertilizers at affordable costs to farmers, but the artificially low-priced fertilizers also contributed to a nationwide trend of fertilizer overuse, leading to nutrient pollution. China needs innovative policies and programs to address food security and sustainability challenges. In this study, we review and analyze policies and programs related to China's fertilizer production and use in a 60-yr span (1950-2010) and discuss its impact on the development of the industry, food security, and pressing environmental issues. Finally, our study analyzes long-term trends in fertilizer use in China and offers some key viewpoints to stimulate debates among all stakeholders. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  9. Decentralized Transactions in a Centralized Environment : A Blockchain Study Within the Transport Industry

    OpenAIRE

    Löf, Marcus

    2017-01-01

    The blockchain technology constitutes a domain where significant research is done. The technology revolutionized the world through the cryptocurrency Bitcoin, and since then new applications of the technology have emerged. One of the applications is to represent real assets as digital assets on a blockchain, so called smart-property. In this thesis a smart-property solution is utilized to address creditworthiness issues within the transport industry. A Proof-of-Concept (PoC) is implemented us...

  10. New Directions in Virtual Environments and Gaming to Address Obesity and Diabetes: Industry Perspective

    OpenAIRE

    Ruppert, Barb

    2011-01-01

    Virtual reality is increasingly used for education and treatment in the fields of health and medicine. What is the health potential of virtual reality technology from the software development industry perspective? This article presents interviews with Ben Sawyer of Games for Health, Dr. Walter Greenleaf of InWorld Solutions, and Dr. Ernie Medina of MedPlay Technologies. Games for Health brings together researchers, medical professionals, and game developers to share information on the impact ...

  11. An Efficient SDN Multicast Architecture for Dynamic Industrial IoT Environments

    Directory of Open Access Journals (Sweden)

    Hyeong-Su Kim

    2018-01-01

    Full Text Available Large-scale industrial IoT services appear in smart factory domains such as factory clouds which integrate distributed small factories into a large virtual factory with dynamic combination based on orders of consumers. A smart factory has so many industrial elements including various sensors/actuators, gateways, controllers, application servers, and IoT clouds. Since there are complex connections and relations, it is hard to handle them in point-to-point manner. In addition, many duplicated traffics are exchanged between them through the Internet. Multicast is believed as an effective many-to-many communication mechanism by establishing multicast trees between sources and receivers. There are, however, some issues for adopting multicast to large-scale industrial IoT services in terms of QoS. In this paper, we propose a novel software-defined network multicast based on group shared tree which includes near-receiver rendezvous point selection algorithm and group shared tree switching mechanism. As a result, the proposed multicast mechanism can reduce the packet loss by 90% compared to the legacy methods under severe congestion condition. GST switching method obtains to decreased packet delay effect, respectively, 2%, 20% better than the previously studied multicast and the legacy SDN multicast.

  12. Productive performance and industrial quality of wheat genotypes grown in two environments

    Directory of Open Access Journals (Sweden)

    Omar Possatto Junior

    Full Text Available ABSTRACT Wheat flour can be allocated for manufacturing various products, but each purpose requires specificities defined by the industrial quality. The objective of this study was to evaluate the performance of experimental lines and commercial cultivars of wheat, in South and Southeast of Brazil and to identify genotypes with favorable characteristics of industrial quality. Twenty lines in the stage of cultivation and use and three commercial cultivars were evaluated for grain yield components (hectoliter weight and thousand-grain weight and features related to the industrial quality of the flour (protein, flour stability, sedimentation with sodium dodecyl sulfate and color. The genotypes CRX/CD104//ALC, LAJ96010/JSP//ALC and CRX/ALC//ALC showed favorable characteristics for biscuit production, while the genotypes ORL97061/ORL00241//CD104, SUZ6/WEAVER//TUI/3/SUP/4/CD104, ORL99396/ORL97061//SUP, CRX/CD104//ALC, ORL98231/IOR00131//ÔNIX, ORL94346/ALC//AVT/3/ÔNIX, CEP0033/ÔNIX/3/ÔNIX*2//TC14/2*SPEAR, Campo Real/VAN//ÔNIX, ORL97061/CD 104 and PMP/ORL98231//CRX have aptitude for baking. The evaluations were efficient for the classification and selection of genotypes in the wheat breeding program.

  13. Lignite industry in Greece within a world context: Mining, energy supply and environment

    International Nuclear Information System (INIS)

    Kavouridis, Konstantinos

    2008-01-01

    Today coal covers 38% of global production and roughly 30% of the EU-25 power output. In 2005 domestic lignite with a share of 60.5% in power generation and accounting about 30% of primary energy consumption is currently the most important indigenous fuel of Greece. Greece, mining 70 Mt annually, is the second lignite producer in the EU and fourth in the world. Approximately 97% of the lignite used to supply the existing lignite-fired power plants of Greece is mined by Public Power Corporation S.A. (PPC). Lignite as the base load fuel gives a competitive strength in PPC's and Greece's fuel mix. Due to lignite consumer prices in Greece are significantly below those in other comparable markets in EU-15. Extraction of lignite has a very long tradition. Significant achievements and large experience which has been gained during many years of mining operations place Greek lignite-mining industry in the leading position in Europe. The paper presents current state of Greek lignite industry, including operating mines, volume of production and other important production indicators as well as improvements in labor productivity and good results in industrial safety. The future of coal and specifically of Greek lignite will be crucially determined by environmentally compatible, i.e. low-CO 2 generation of electricity. Investment in modernization and renewal of the power plant fleet are the key to securing electricity supply and progress in preventing climate change

  14. Environment

    DEFF Research Database (Denmark)

    Valentini, Chiara

    2017-01-01

    The term environment refers to the internal and external context in which organizations operate. For some scholars, environment is defined as an arrangement of political, economic, social and cultural factors existing in a given context that have an impact on organizational processes and structures....... For others, environment is a generic term describing a large variety of stakeholders and how these interact and act upon organizations. Organizations and their environment are mutually interdependent and organizational communications are highly affected by the environment. This entry examines the origin...... and development of organization-environment interdependence, the nature of the concept of environment and its relevance for communication scholarships and activities....

  15. The company, strategist and negotiator in the domain of environment. The case of EDF's hydroelectric industry

    International Nuclear Information System (INIS)

    Gaudefroy de Mombynes-Lemenager, T.

    2007-11-01

    This thesis tries to answer the practical and theoretical problems of environment protection in the case of the hydropower branch of Electricite de France (EDF) company. These problems concern the contribution of the company to environment protection and the evaluation of this contribution. The work stresses on the synergic dimension (cooperation and negotiation) of the company/environment problem but also on the conflict dimension necessarily associated to this problem. The environmental management of a company has to deal with the complex game between the internal organisational stakes and the external relational strategies. A model is proposed which allows to evaluate the efficiency of a given environmental management system and to evaluate the participation of companies to this system with respect to the above listed points. Finally, some recommendations and elements of answers are proposed. (J.S.)

  16. Benzpyrene in the environment

    Energy Technology Data Exchange (ETDEWEB)

    Chao, C

    1977-09-01

    Benzpyrene is a coal-tar chemical compound which is believed to be one of the major causes of cancer. Laboratory tests show that animals treated with benzpyrene and croton oil tend to develop cancerous cells on the skin. Benzpyrene may be produced either from the combustion of petroleum fuels, automobile exhaust, cigarette smoke, and other combustion processes, or from biological interactions. Decomposition of benzpyrene can also be accomplished by two different mechanisms: physical oxidation process or biological reduction process. Under natural conditions, the formation and decomposition processes are in a state of equilibrium and the level of benzpyrene in the environment is quite low. However, with the rapid industrial development, the concentration of benzpyrene and other pollutants near urban areas has reached dangerously high levels; this is correlated with the high incidence of lung cancer in urban regions.

  17. Effects of preheated combustion air on laminar coflow diffusion flames under normal and microgravity conditions

    Science.gov (United States)

    Ghaderi Yeganeh, Mohammad

    Global energy consumption has been increasing around the world, owing to the rapid growth of industrialization and improvements in the standard of living. As a result, more carbon dioxide and nitrogen oxide are being released into the environment. Therefore, techniques for achieving combustion at reduced carbon dioxide and nitric oxide emission levels have drawn increased attention. Combustion with a highly preheated air and low-oxygen concentration has been shown to provide significant energy savings, reduce pollution and equipment size, and uniform thermal characteristics within the combustion chamber. However, the fundamental understanding of this technique is limited. The motivation of the present study is to identify the effects of preheated combustion air on laminar coflow diffusion flames. Combustion characteristics of laminar coflow diffusion flames are evaluated for the effects of preheated combustion air temperature under normal and low-gravity conditions. Experimental measurements are conducted using direct flame photography, particle image velocimetry (PIV) and optical emission spectroscopy diagnostics. Laminar coflow diffusion flames are examined under four experimental conditions: normal-temperature/normal-gravity (case I), preheated-temperature/normal gravity (case II), normal-temperature/low-gravity (case III), and preheated-temperature/low-gravity (case IV). Comparisons between these four cases yield significant insights. In our studies, increasing the combustion air temperature by 400 K (from 300 K to 700 K), causes a 37.1% reduction in the flame length and about a 25% increase in peak flame temperature. The results also show that a 400 K increase in the preheated air temperature increases CH concentration of the flame by about 83.3% (CH is a marker for the rate of chemical reaction), and also increases the C2 concentration by about 60% (C2 is a marker for the soot precursor). It can therefore be concluded that preheating the combustion air

  18. Annual Report: Advanced Combustion (30 September 2012)

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, Jeffrey [NETL; Richards, George

    2012-09-30

    The Advanced Combustion Project addresses fundamental issues of fire-side and steam-side corrosion and materials performance in oxy-fuel combustion environments and provides an integrated approach into understanding the environmental and mechanical behavior such that environmental degradation can be ameliorated and long-term microstructural stability, and thus, mechanical performance can lead to longer lasting components and extended power plant life. The technical tasks of this effort are Oxy-combustion Environment Characterization, Alloy Modeling and Life Prediction, and Alloy Manufacturing and Process Development.

  19. Executive Perceptions on International Education in a Globalized Environment: The Travel Industry's Point of View

    Science.gov (United States)

    Munoz, J. Mark; Katsioloudes, Marios I.

    2004-01-01

    Research on globalization has determined travel executives' perceptions of the psychological implications brought about by an interconnected global environment and the implications on international education. With the concepts of Clyne and Rizvi (1998) and Pittaway, Ferguson, and Breen (1998) on the value of cross-cultural interaction as a…

  20. Development of the construction industry in the trend of attention to the formation of the urban environment promotion

    Science.gov (United States)

    Maximova, Ekaterina

    2017-10-01

    Creation of the new image of cities becomes an important modern tendency. Foreign experience creation of the comfortable living conditions for the urban population could show the improvement of many social indicators of the society development. Existence of the positive result from the renovation of city territories performance in Russia can be indicated on the example of the city of Moscow. This article shows the tasks which state plans to create for the comfortable urban environment. In this regard, the directions of the development of the construction industry, which allow to increase the level of business activity are shown.

  1. The destabilization of the French electricity supply industry nascent competition in an open environment

    Energy Technology Data Exchange (ETDEWEB)

    Finon, D

    2001-06-01

    In February 2000 France, compelled by the 1996 European Directive 96/92, undertook a minimal reform of the organisation of its electricity industry, while preserving the boundaries of the incumbent company. The aim of this paper is to analyse the conditions of destabilization of the industrial organisation of the French ESI, by identifying the economic factors of endogenous and exogenous erosion. Firstly, after setting out the main elements of the French reform, which is aimed at making the electricity market contestable, the effectiveness of the ''contestability'' of the French power market is discussed. Secondly in order to test the stability of the new institutional arrangements, an institutional prospect is developed, on the basis of economic factors of instability and resistance, to produce two contrasting scenarios: one in which the particularly French model is retained (limited contestability market scenario); another in which there is movement towards a de-integrated competitive model (contamination by competition scenario). Thirdly the author concludes on the basis of recent elements, that the future would be a mix of these two trajectories which will come within in the progressive integration of the national markets in continental Europe. (A.L.B.)

  2. IMPACT UPON ENVIRONMENT PROTECTION DUE TO DEFECTIVELY PRODUCED AND OPERATED VENTILATION SYSTEMS IN FOOD INDUSTRY

    Directory of Open Access Journals (Sweden)

    Izabela Małecka

    2014-10-01

    Full Text Available Mechanical (air-conditioning ventilation systems and equipment in the food industry may transfer various pathogenic bacteria causing, for instance, pneumonia (Legionellosis. Microclimate parameters in manufacturing shops felt by people are affected by: human factors (health, individual temperature perception etc, and non-human factors (air physical parameters, air freshness and cleanliness etc.. Microbiological contamination of process equipment, machines and systems such as ventilation and air-conditioning equipment causes growth of pathogenic bacteria. The amount of air supplied and removed from a room depends on its use and load of odours and hazardous material. As a result of dew point formation in ventilation systems may appear the so-called air-borne condensation nuclei on which steam settles when the air gets oversaturated. The air flow rate has a material influence upon comfortable conditions in human inhabited zones. In manufacturing shops where the highest air quality is a priority, radial disinfection by means of catalytic ionization is applied. In food industry manufacturing shops of higher microbiological standard, ventilation systems based on air re-circulation should not be used.

  3. The destabilization of the French electricity supply industry nascent competition in an open environment

    International Nuclear Information System (INIS)

    Finon, D.

    2001-06-01

    In February 2000 France, compelled by the 1996 European Directive 96/92, undertook a minimal reform of the organisation of its electricity industry, while preserving the boundaries of the incumbent company. The aim of this paper is to analyse the conditions of destabilization of the industrial organisation of the French ESI, by identifying the economic factors of endogenous and exogenous erosion. Firstly, after setting out the main elements of the French reform, which is aimed at making the electricity market contestable, the effectiveness of the ''contestability'' of the French power market is discussed. Secondly in order to test the stability of the new institutional arrangements, an institutional prospect is developed, on the basis of economic factors of instability and resistance, to produce two contrasting scenarios: one in which the particularly French model is retained (limited contestability market scenario); another in which there is movement towards a de-integrated competitive model (contamination by competition scenario). Thirdly the author concludes on the basis of recent elements, that the future would be a mix of these two trajectories which will come within in the progressive integration of the national markets in continental Europe. (A.L.B.)

  4. Atmospheric depositions around a heavily industrialized area in a seasonally dry tropical environment of India

    International Nuclear Information System (INIS)

    Singh, Raj Kumar; Agrawal, Madhoolika

    2005-01-01

    Clear and throughfall bulk depositions were collected in the downwind of a highly industrialized region in Sonbhadra district of India to estimate the influence of anthropogenic activities on chemical composition of depositions. Significant spatial and temporal variations in depositions of cations and anions were observed. Depositions were higher near the thermal power stations and coalmines as compared to distantly situated site. Seasonally summer samples showed maximum cation and anion depositions followed by winter and minimum in rainy season. The mean pH of the depositions indicates that rainfall in the area is alkaline. Among the anions, maximum deposition was recorded for SO 4 2- followed by NO 3 - and minimum for Cl - . Among the cations, Ca 2+ deposition was maximum followed by NH 4 + . Na + , K + and Mg 2+ deposition rates showed more or less similar values. The depositions of cations and anions as well as pH were higher in throughfall than clearfall samples. Results of the present study suggest that atmospheric depositions are strongly modified due to thermal power stations and coal mines in the area. - Atmospheric abundance of cations have neutralized the acidity of depositions around a heavily industrialized area in India

  5. An industry-wide commitment to the environment. Vastuu huomisesta - Responsible Care-ohjelmalla rakennetaan tulevaisuutta

    Energy Technology Data Exchange (ETDEWEB)

    Salo, L.

    1992-01-01

    As part of its ongoing effort to further enhance its environmental, health, and safety effort. Neste committed itself to the international chemical industry's Responsible Care programme last year. Neste's involvement with the programme will supplement the Corporation's internal environmental and safety operating principles Neste's Responsible Care work is based around a set of 10 guiding principles set out by the European Chemical Industry Federation (CEFIC). In addition to corporate-level targets, divisions and units have drawn up more detailed and specific coals for their own operations. Neste Chemicals' production plants, for example have developed action plans covering the next 3-5 years. A network of divisional RC coordinators and unit or site-specific RC contact personnel has also been established Progress will be measured by indicators covering areas such as emission levels, energy use, amount of recycled waste, noise, and training Concrete benefits have already been achieved thanks simply to the start of the systematic measurement and collation of RC-related information.

  6. Environmental and Human Health Impacts of Usage of Oil Industry Products and Wastes as Alternative Fuel

    Directory of Open Access Journals (Sweden)

    Dilek BOLAT

    2016-03-01

    Full Text Available The need for oil industry products has been increasing in parallel to the rapid population growth and industrialization. Physical and chemical properties of these products change after usage based on the media and operating conditions. Then, these products lose the eligibility and turn into the form of waste. The most commonly used method for the disposal of waste oils is combustion due to its high calorific value. In this study, the possible effects on the environment and human health of combustion of oil industry products and wastes are evaluated. Poor combustion conditions lead emissions from the process depending on the ingredients of wastes in addition to incomplete combustion products such as particulate matter, carbon monoxide, volatile organic chemicals polyaromatic hydrocarbons, metals etc. that may occur according to the type of waste. These emissions are released into the environment and partition between soil, water and air media related to their physicochemical characteristics. In addition to environmental problems, these emissions are a risk factor for human health in terms of carcinogenicity and mutagenicity. Regulations and control measures should be put into practice in order to get rid of the effects of non-standard diesel like product named number 10 lube on human health and environment. In this context, emission measurements should be done simultaneously to determine the effects of combustion of these wastes and products of oil industry.

  7. Separation systems for the nuclear industry: from system elaboration to its validation in radioactive environment

    International Nuclear Information System (INIS)

    Draye, Micheline

    2004-01-01

    My research deals with the end of the electronuclear cycle and aims to design, create, assess and/or improve various separation Systems for spent nuclear fuel reprocessing. The range of roads explored is large from liquid-liquid extraction, tp membrane processes, through solid-liquid extraction. Beyond the development of various concepts for targeted radionuclides separation, the Systems efficiency and stability were studied. Evaluation of irradiation dose on separations was examined based on the needs of the nuclear industry. As an example, after highlighting the great potential of DCH18C6 for the development of a new nuclear fuel reprocessing process, we determined the structure of its degradation products using a suite of analytical techniques (FTIR, NMR, CG-MS and X-ray diffraction). Considering the increasing precautions taken by the nuclear industry, we deem it necessary to expand our investigations into organic stereochemistry of extracting ligands. We determined the stereochemistry of the DCH18C6 radiolysis products. Despite the capacity of the structural analytical techniques used and previously quoted, we synthesized each possible structure to assess ail the proposed fragments. These syntheses allowed us to evaluate the degradation products interference during potential DCH18C6 industrial use and to conclude that its great extraction capabilities and its remarkable chemical and radiochemical stability make the DCH18C6 a reliable candidate for the spent nuclear fuel reprocessing. To vary the available analytical techniques and to develop more relevant scientific approaches, some of the described work was conducted as a part of national and/or international collaborations. In this context, the study of the poly(4-vinylpyridine) (P4VP) resin stability in radioactive medium allowed us to establish a scientific collaboration with the 'Nuclear Physic Institute of Lyon' for the use of a surface analysis fine technique, the Time of Flight

  8. Features of state industrial policy under imperfect technological and institutional environment

    Directory of Open Access Journals (Sweden)

    Denisov Igor Vladimirovich

    2011-07-01

    Full Text Available For all countries with imperfect technology and the institutional environment (low culture and organization of production, high levels of corruption, the small middle class, not necessarily the execution of laws, etc., even such strong measures to support the economy like a direct financing of firms and territories, protectionism, stimulation of demand, etc. does not give significant effect. For Russia, which objectively have to be attributed to such countries, extremely relevant management system development, capable of overcoming difficulties, starting with the knees and the resistance of the imperfect (bad technological and institutional environment. Several theoretical solutions recently obtained through the development of the theory of economic-technological development of civilization, can create the mechanism and conditions of such a system.

  9. Role of the engineer in protecting personnel and the environment in the nuclear industry

    International Nuclear Information System (INIS)

    Braun, J.D.

    1977-01-01

    The engineer plays a key role in protecting both people and the environment from the adverse effects of radioactive materials. The nature of the hazards and some of the problems associated with plutonium and tritium operations are discussed and the solutions provided by sound engineering facility design are shown. Facility designs have been required for operations involving 239 Pu, 238 Pu and 3 H, and the different properties of these isotopes require differing solutions to design problems

  10. Combustion 2000

    Energy Technology Data Exchange (ETDEWEB)

    A. Levasseur; S. Goodstine; J. Ruby; M. Nawaz; C. Senior; F. Robson; S. Lehman; W. Blecher; W. Fugard; A. Rao; A. Sarofim; P. Smith; D. Pershing; E. Eddings; M. Cremer; J. Hurley; G. Weber; M. Jones; M. Collings; D. Hajicek; A. Henderson; P. Klevan; D. Seery; B. Knight; R. Lessard; J. Sangiovanni; A. Dennis; C. Bird; W. Sutton; N. Bornstein; F. Cogswell; C. Randino; S. Gale; Mike Heap

    2001-06-30

    . To achieve these objectives requires a change from complete reliance of coal-fired systems on steam turbines (Rankine cycles) and moving forward to a combined cycle utilizing gas turbines (Brayton cycles) which offer the possibility of significantly greater efficiency. This is because gas turbine cycles operate at temperatures well beyond current steam cycles, allowing the working fluid (air) temperature to more closely approach that of the major energy source, the combustion of coal. In fact, a good figure of merit for a HIPPS design is just how much of the enthalpy from coal combustion is used by the gas turbine. The efficiency of a power cycle varies directly with the temperature of the working fluid and for contemporary gas turbines the optimal turbine inlet temperature is in the range of 2300-2500 F (1260-1371 C). These temperatures are beyond the working range of currently available alloys and are also in the range of the ash fusion temperature of most coals. These two sets of physical properties combine to produce the major engineering challenges for a HIPPS design. The UTRC team developed a design hierarchy to impose more rigor in our approach. Once the size of the plant had been determined by the choice of gas turbine and the matching steam turbine, the design process of the High Temperature Advanced Furnace (HITAF) moved ineluctably to a down-fired, slagging configuration. This design was based on two air heaters: one a high temperature slagging Radiative Air Heater (RAH) and a lower temperature, dry ash Convective Air Heater (CAH). The specific details of the air heaters are arrived at by an iterative sequence in the following order:-Starting from the overall Cycle requirements which set the limits for the combustion and heat transfer analysis-The available enthalpy determined the range of materials, ceramics or alloys, which could tolerate the temperatures-Structural Analysis of the designs proved to be the major limitation-Finally the commercialization

  11. The strategic management of sudden changes in the competitive environment: The case of the French dairy industry

    Directory of Open Access Journals (Sweden)

    Paulette Robic

    2003-01-01

    Full Text Available The thesis defended is that sudden changes in the competitive environment constitutes more an opportunity than a constraint for pro-active companies. A neo-institutional framework is chosen to analyse the strategic management of such sudden changes. We focus on the sudden change in regulation the dairy industry experienced in 1984 (i.e. the restriction of raw materials by the fixing of milk quotas in 1984. The longitudinal study of a family dairy business – the Laconie society- complemented by a sectorial analysis has allowed us to analyse the effects of milk quotas on the strategy of these businesses. A phenomenon of coercive isomorphism is noted, as all the dairy firms launched into diversification. Simultaneously, we notice an obvious interaction between quotas (coercive institution- and abilities and organizational identity (cognitive institution. Confronted to sudden changes in the competitive environment the firms have, of course, been forced to evolve. However, the firms which had based their preceding development on their ability to anticipate, innovate, and change their organizational identity have been able, in a later stage, to transform these constraints into opportunities. The interaction between the environment and the strategic policy of the firms is obvious. It originates, in particular, from the permanent involvement of the firm in the social and economic sphere, as well as its organizational identity and the manager’s family. The concepts of involvement, isomorphism and interaction between the environment and strategic policy are called upon to conduct this research.

  12. Modelo de Negócio: As Operações de uma Distribuidora de Combustíveis no Complexo Industrial Portuário de Suape/PE

    Directory of Open Access Journals (Sweden)

    Davi Lucas Arruda de Araújo

    2017-04-01

    Full Text Available O objetivo principal desta pesquisa consiste em identificar as dimensões do modelo de negócios utilizando o Canvas Business Model, da empresa ALFA Combustíveis no Complexo Industrial Portuário de Suape/PE. O estudo é de natureza exploratória e foi desenvolvido mediante uma pesquisa de campo qualitativa. A coleta de dados ocorreu por meio de entrevistas semiestruturadas considerando como sujeitos de pesquisa profissionais desta distribuidora que atuam na base de operações do complexo de Suape/PE. E no tratamento, interpretação e análise dos resultados acerca dos dados coletados foi utilizada a técnica de categorização baseado em (Flores, 1994. Os resultados revelam que a empresa, no que diz respeito a oferta de valor, desenvolve ações para melhoria da eficiência na prestação do serviço. No que tange a infraestrutura, pessoas com expertise, atividades bem alinhadas e política de custos bem definidas são necessárias para o desenvolvimento deste tipo de negócio. E, no que se refere aos clientes, a segmentação em postos revendedores, o desenvolvimento de softwares que auxiliam no relacionamento com os clientes, projetos de entrega de produtos em tempo hábil e delimitação das fontes de receitas em função das atividades que são executadas na base configuram o modelo de negócio de uma distribuidora de combustíveis.

  13. Radioactivity of combustion residues from coal-fired power stations

    International Nuclear Information System (INIS)

    Vom Berg, W.; Puch, K.H.

    1996-01-01

    Each year in Germany, about 18 mill. t of combustion residues are produced from the combustion of bituminous coal and lignite. They are utilized to a great extent in the construction industry and in mining. During the combustion of coal, the radio-nuclides remain predominantly in the ash. The radionuclide concentration in lignite ash is within the range of that in natural soil. The combustion residues of bituminous coal contain radio-nuclides of a similar order of magnitude as also can occur in natural rock. The utilization of combustion residues in construction materials makes a negligible contribution to radiation exposure through retention in buildings. (orig.) [de

  14. Conversion of by-products from the vegetable oil industry into biodiesel and its use in internal combustion engines: a review

    Directory of Open Access Journals (Sweden)

    R. Piloto-Rodríguez

    2014-06-01

    Full Text Available Biodiesel produced from by-products and waste materials can be an economical way of reducing traditional oil consumption and environmental problems. The by-products from the vegetable oil refining industry such as soapstock, acid oil and fatty acid distillates are suitable for producing biodiesel. The present work is a survey related to the use of these by-products to obtain biodiesel, covering not only the traditional and most widely used acid/base catalysis, but also solid and enzymatic catalysis. Details of the techniques are presented and compared. The advantages and drawbacks of the different approaches are mentioned and analyzed. The synthesis and use of by-products from the vegetable oil refining industry are covered in this work. The use of the obtained biodiesel in diesel engines is also included, demonstrating the disparity between the number of papers related to biodiesel production and engine performance assessment.

  15. Reduced NOX combustion method

    International Nuclear Information System (INIS)

    Delano, M.A.

    1991-01-01

    This patent describes a method for combusting fuel and oxidant to achieve reduced formation of nitrogen oxides. It comprises: It comprises: heating a combustion zone to a temperature at least equal to 1500 degrees F.; injecting into the heated combustion zone a stream of oxidant at a velocity within the range of from 200 to 1070 feet per second; injecting into the combustion zone, spaced from the oxidant stream, a fuel stream at a velocity such that the ratio of oxidant stream velocity to fuel stream velocity does not exceed 20; aspirating combustion gases into the oxidant stream and thereafter intermixing the aspirated oxidant stream and fuel stream to form a combustible mixture; combusting the combustible mixture to produce combustion gases for the aspiration; and maintaining the fuel stream substantially free from contact with oxidant prior to the intermixture with aspirated oxidant

  16. Coal combustion technology in China

    International Nuclear Information System (INIS)

    Huang, Z.X.

    1994-01-01

    Coal is the most important energy source in China, the environmental pollution problem derived from coal burning is rather serious in China. The present author discusses coal burning technologies both in boilers and industrial furnaces and their relations with environmental protection problems in China. The technological situations of Circulating Fluidized Bed Coal Combustor, Pulverized Coal Combustor with Aerodynamic Flame Holder and Coal Water Slurry Combustion have been discussed here as some of the interesting problems in China only. (author). 3 refs

  17. Crustal layering, simplicity, and the oil industry: The alteration of an epistemic paradigm by a commercial environment

    Science.gov (United States)

    Anduaga, Aitor

    This paper proposes that the gradual alteration of the predominant epistemic paradigm in crustal seismology in the interwar period-namely, simplicity-came about because of the strong influence of a particular commercial environment, i.e. the oil industry. I begin by demonstrating the interwar predominance of Jeffreys' 'simplicity postulate' and his probabilistic epistemology, highlighting the espousal by several seismologists (Bullen, Stoneley, Byerly), whose crustal models drew on mathematical idealisations. Next, I demonstrate that the renunciation of simplicity in the 1930s came about too quickly, and, above all, too heterodoxically to have been the result of new geological evidence. Rather, I argue, the paradigm shift among seismologists was a result of the significant rise in seismic exploration generated by the oil industry. Driven by market demands, American petroleum companies pioneered new technologies, organised research initiatives, and trained young geophysicists who, through the fusion of experimentalism and field experience, brought about fundamental progress in earthquake seismology. Remarkably, historians of science have almost entirely failed to recognise the interwar primacy of the simplicity paradigm as well as its subsequent renunciation. More importantly, they have failed to acknowledge the role the oil industry played in contributing to this renunciation and to the development of new paradigms in seismology.

  18. Monitoring for Pb and Cd pollution using feral pigeons in rural, urban, and industrial environments of Korea

    International Nuclear Information System (INIS)

    Nam, Dong-Ha; Lee, Doo-Pyo

    2006-01-01

    This study was aimed at evaluating the lead (Pb) and cadmium (Cd) contamination status using resident pigeons from rural (island), central urban (Seoul), and four industrial complex areas in Korea with varying traffic density as well as atmospheric metal pollution records. We also discussed the results with respect to metal exposure trends in urban area after introduction of lead-free gasoline in Korea. Mean concentrations of Pb and Cd in bone and kidney of pigeons from Seoul were comparable to those from industrial complex areas and were about 15-20 times those at the reference site. This suggests that exposure to metals in the urban environment is as high as in the industrial areas. Lead and Cd concentrations in lungs of pigeons from Seoul were significantly higher by more than three times in 2000 than in 1991 (p < 0.01), whereas the residues in liver, kidney, and bone remained at a similar level, despite the introduction of unleaded gasoline in 1993. The Pb and Cd concentrations in tissues of pigeons did not decrease as atmospheric metal levels decreased. Ingestion may be more important than inhalation in exposing pigeons to Pb and Cd in this study

  19. Monitoring for Pb and Cd pollution using feral pigeons in rural, urban, and industrial environments of Korea

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Dong-Ha [Laboratory for Animal Ecology, School of Environment and Applied Chemistry, Kyunghee University (Korea, Republic of); Lee, Doo-Pyo [Science of Biology, Department of Biological Science, Honam University (Korea, Republic of)]. E-mail: dplee@honam.ac.kr

    2006-03-15

    This study was aimed at evaluating the lead (Pb) and cadmium (Cd) contamination status using resident pigeons from rural (island), central urban (Seoul), and four industrial complex areas in Korea with varying traffic density as well as atmospheric metal pollution records. We also discussed the results with respect to metal exposure trends in urban area after introduction of lead-free gasoline in Korea. Mean concentrations of Pb and Cd in bone and kidney of pigeons from Seoul were comparable to those from industrial complex areas and were about 15-20 times those at the reference site. This suggests that exposure to metals in the urban environment is as high as in the industrial areas. Lead and Cd concentrations in lungs of pigeons from Seoul were significantly higher by more than three times in 2000 than in 1991 (p < 0.01), whereas the residues in liver, kidney, and bone remained at a similar level, despite the introduction of unleaded gasoline in 1993. The Pb and Cd concentrations in tissues of pigeons did not decrease as atmospheric metal levels decreased. Ingestion may be more important than inhalation in exposing pigeons to Pb and Cd in this study.

  20. Impact of urban and industrial effluents on the coastal marine environment in Oran, Algeria.

    Science.gov (United States)

    Tayeb, A; Chellali, M R; Hamou, A; Debbah, S

    2015-09-15

    In Algeria most of the urban waste water is dumped without treatment into the Sea. It is tremendously important to assess the consequences of organic matter rich sewage on marine ecosystem. In this study we investigated the effects of industrial and urban sewage on the dissolved oxygen (O2), chemical oxygen demand (COD), biochemical oxygen demands (BOD5), pH, salinity, electrical conductivity (EC), Metal element (Hg, Pb, Cu, Ni, Cr, Cd), petroleum hydrocarbons (HC), oil and grease (OG) in Bay of Oran, Algeria. A ten-year follow-up research showed that the concentrations of oil and grease released into the bionetwork are of higher ecological impact and this needs to be given the desired consideration. Information on bathing water quality revealed that the most beaches in Oran are under the national environmental standard limit. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Renewable sea energies - The industrial Meccano is underway. Environment: in the jungle of stationary energy storage

    International Nuclear Information System (INIS)

    Lescuyer, Thibault

    2015-01-01

    A first article proposes an overview of the current developments in the field of renewable sea energies where floating wing turbines, wave energy, sea current energy, or sea thermal energy seem to be promising solutions but are still at a pre-industrial stage of development. The article presents different projects and comments their successes and failures. Some innovating and important actors are briefly presented: STX France, DCNS, IDEOL, Nenuphar and EOLR. A second article comments the situation of the energy stationary storage sector which still requires viable economic models and more innovations. Different technologies and projects and the involved actors are evoked: plants of energy transfer by pumping (STEP), hydrogen-based electrochemical storage, and lithium-ion batteries

  2. Industry and the environment: Chief executive officer attitudes, 1976 and 1986

    Science.gov (United States)

    Bowman, James S.; Davis, Charles

    1989-03-01

    This research considers the question of changing environmental values within the leadership of firms responsible for the management of pollution as an unwanted byproduct. Information was obtained from a pair of surveys mailed to the chief executive officers (CEOs) of the 50 largest firms listed within the mining and manufacturing directories of Colorado, Montana, Utah, and Wyoming in 1976 and again in 1986. The authors found that industry CEOs were more supportive of environmental concerns in 1986 than 1976, suggesting that ecological values have become institutionalized to some extent. Yet, there is little indication that this attitudinal shift in environmental concern among CEOs has been accompanied by a willingness to spend a larger proportion of the company budget on pollution control or to improve working relationships with federal regulatory officials.

  3. Current and historic mercury deposition to New Haven Harbor (CT, USA): Implications for industrial coastal environments

    International Nuclear Information System (INIS)

    Clark, Heather F.; Benoit, Gaboury

    2009-01-01

    This study quantifies historic and current mercury contamination in New Haven Harbor (New Haven, Connecticut, USA) through the analysis of sediment cores. The mercury concentration measured in surface sediment ranged from 320 to 1640 μg kg -1 with an average of 530 μg kg -1 . The harbor is relatively small in area (6.6 km 2 ) but displays a large range in concentrations, illustrating the important methodological issue that a large number of samples may be necessary to capture the variability in even a small area. Depth profiles of mercury reflect sedimentation over a range of 20 to 200 years and indicate a complex history of contamination. Mercury depth profiles were compared with lead, copper, cadmium, and silver concentrations and the metals generally covary. This trend indicates that the sources of mercury and heavy metals are linked and that regionally specific sources dominate the historic input of metals rather than large-scale atmospheric deposition patterns. Results also show there are large differences in absolute concentrations of metals among sites in the harbor. Differences in the abundance of Fe-rich, fine-grained sediment likely control the level of metals in various parts of the harbor. Proximity to current sources and the long, diverse industrial history of the harbor also influence the distribution pattern. All of the cores can be modeled as mixing between pre-industrial sediments and either one or two pollution endmembers. This study demonstrates the importance of riverine sources in the mass balance of mercury delivered to coastal areas and of watershed management to preserve coastal ecosystems.

  4. Development of a Premixed Combustion Capability for Scramjet Combustion Experiments

    Science.gov (United States)

    Rockwell, Robert D.; Goyne, Christopher P.; Rice, Brian E.; Chelliah, Harsha; McDaniel, James C.; Edwards, Jack R.; Cantu, Luca M. L.; Gallo, Emanuela C. A.; Cutler, Andrew D.; Danehy, Paul M.

    2015-01-01

    Hypersonic air-breathing engines rely on scramjet combustion processes, which involve high speed, compressible, and highly turbulent flows. The combustion environment and the turbulent flames at the heart of these engines are difficult to simulate and study in the laboratory under well controlled conditions. Typically, wind-tunnel testing is performed that more closely approximates engine testing rather than a careful investigation of the underlying physics that drives the combustion process. The experiments described in this paper, along with companion data sets being developed separately, aim to isolate the chemical kinetic effects from the fuel-air mixing process in a dual-mode scramjet combustion environment. A unique fuel injection approach is taken that produces a nearly uniform fuel-air mixture at the entrance to the combustor. This approach relies on the precombustion shock train upstream of the dual-mode scramjet combustor. A stable ethylene flame anchored on a cavity flameholder with a uniformly mixed combustor inflow has been achieved in these experiments allowing numerous companion studies involving coherent anti-Stokes Raman scattering (CARS), particle image velocimetry (PIV), and planar laser induced fluorescence (PLIF) to be performed.

  5. Proceedings of the international symposium on coal - science, technology, industry, business, environment

    Energy Technology Data Exchange (ETDEWEB)

    Narasimhan, K.S.; Sen, S. [eds.

    1996-12-31

    Papers were presented which covered the areas of coal science, advanced coal preparation, coal utilization, coal chemicals and the environment. These included carbon aromaticity, mineral studies, utilization of low rank coals, bioconversion of methane, swelling of coals, photocatalytic activity, flotation and effects of oxidation, microbial desulfurization, deashing, briquetting, commercial scale conversion of coal to fuels and chemicals, role of coal in iron and steel making, coal-water mixtures, dyes and chemical products, nitrogen oxides emissions and pollution control. 45 papers have been abstracted separately for the IEA Coal Research CD-ROM.

  6. Electricity conflicts. Self-conception and strategic action of the electricity industry between politics, industry, the environment and the public (1970-1989); Stromkonflikte. Selbstverstaendnis und strategisches Handeln der Stromwirtschaft zwischen Politik, Industrie, Umwelt und Oeffentlichkeit (1970-1989)

    Energy Technology Data Exchange (ETDEWEB)

    Erhardt, Hendrik

    2017-07-01

    The energy industry has undergone a fundamental transformation process over the past 50 years. The author examines in this study the beginnings and challenges of this process since the 1970s on the basis of previously unevaluated corporate and association sources. For the areas of energy demand, industry and the environment and the public, the author analyzes the behavior of the electricity industry, which since the 1970s has been moving between persistence and change pressure. What leeway did the companies have in these three areas? How did the energy suppliers' actions shape the German energy system? And how did their actions change their image in public? These questions the changes in the energy industry have so far neither been scientifically adequately investigated nor adequately reflected by the actors themselves. The results of the work thus make an important contribution to the analysis of the beginnings the energy transition. [German] Die Energiewirtschaft hat in den vergangenen knapp 50 Jahren einen fundamentalen Transformationsprozess durchlaufen. Hendrik Ehrhardt untersucht in dieser Studie die Anfaenge und Herausforderungen dieses Prozesses seit den 1970er Jahren anhand bisher nicht ausgewerteter Unternehmens- und Verbandsquellen. Fuer die Bereiche Energiebedarf, Industrie sowie Umwelt und Oeffentlichkeit analysiert er das Handeln der Stromwirtschaft, das sich seit den 1970er Jahren zwischen Beharrungsvermoegen und Veraenderungsdruck bewegte. Welche Entscheidungsspielraeume hatten die Unternehmen in diesen drei Bereichen? Wie formte das Handeln der Energieversorger das deutsche Energiesystem? Und wie veraenderte deren Handeln ihr Bild in der Oeffentlichkeit? Diese Fragen nach dem Wandel in der Energiewirtschaft wurden bisher weder wissenschaftlich hinreichend untersucht, noch von den Akteuren selbst ausreichend reflektiert. Die Ergebnisse der Arbeit leisten damit einen wichtigen Beitrag zur Analyse der Anfaenge der Energiewende.

  7. 40 CFR 60.1015 - What is a new municipal waste combustion unit?

    Science.gov (United States)

    2010-07-01

    ... combustion unit? 60.1015 Section 60.1015 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... for Small Municipal Waste Combustion Units for Which Construction is Commenced After August 30, 1999... What is a new municipal waste combustion unit? (a) A new municipal waste combustion unit is a municipal...

  8. The John Zink Hamworthy combustion handbook, v.1 fundamentals

    CERN Document Server

    Baukal, Charles E

    2012-01-01

    Despite the length of time it has been around, its importance, and vast amounts of research, combustion is still far from being completely understood. Environmental, cost, and fuel consumption issues add further complexity, particularly in the process and power generation industries. Dedicated to advancing the art and science of industrial combustion, The John Zink Hamworthy Combustion Handbook, Second Edition: Volume One - Fundamentals gives you a strong understanding of the basic concepts and theory. Under the leadership of Charles E. Baukal, Jr., top combustion engineers and technologists f

  9. Combustion instability modeling and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Santoro, R.J.; Yang, V.; Santavicca, D.A. [Pennsylvania State Univ., University Park, PA (United States); Sheppard, E.J. [Tuskeggee Univ., Tuskegee, AL (United States). Dept. of Aerospace Engineering

    1995-12-31

    It is well known that the two key elements for achieving low emissions and high performance in a gas turbine combustor are to simultaneously establish (1) a lean combustion zone for maintaining low NO{sub x} emissions and (2) rapid mixing for good ignition and flame stability. However, these requirements, when coupled with the short combustor lengths used to limit the residence time for NO formation typical of advanced gas turbine combustors, can lead to problems regarding unburned hydrocarbons (UHC) and carbon monoxide (CO) emissions, as well as the occurrence of combustion instabilities. The concurrent development of suitable analytical and numerical models that are validated with experimental studies is important for achieving this objective. A major benefit of the present research will be to provide for the first time an experimentally verified model of emissions and performance of gas turbine combustors. The present study represents a coordinated effort between industry, government and academia to investigate gas turbine combustion dynamics. Specific study areas include development of advanced diagnostics, definition of controlling phenomena, advancement of analytical and numerical modeling capabilities, and assessment of the current status of our ability to apply these tools to practical gas turbine combustors. The present work involves four tasks which address, respectively, (1) the development of a fiber-optic probe for fuel-air ratio measurements, (2) the study of combustion instability using laser-based diagnostics in a high pressure, high temperature flow reactor, (3) the development of analytical and numerical modeling capabilities for describing combustion instability which will be validated against experimental data, and (4) the preparation of a literature survey and establishment of a data base on practical experience with combustion instability.

  10. Coal combustion waste management study

    International Nuclear Information System (INIS)

    1993-02-01

    Coal-fired generation accounted for almost 55 percent of the production of electricity in the United States in 1990. Coal combustion generates high volumes of ash and flue gas desulfurization (FGD) wastes, estimated at almost 90 million tons. The amount of ash and flue gas desulfurization wastes generated by coal-fired power plants is expected to increase as a result of future demand growth, and as more plants comply with Title IV of the 1990 Clean Air Act Amendments. Nationwide, on average, over 30 percent of coal combustion wastes is currently recycled for use in various applications; the remaining percentage is ultimately disposed in waste management units. There are a significant number of on-site and off-site waste management units that are utilized by the electric utility industry to store or dispose of coal combustion waste. Table ES-1 summarizes the number of disposal units and estimates of waste contained at these unites by disposal unit operating status (i.e, operating or retired). Further, ICF Resources estimates that up to 120 new or replacement units may need to be constructed to service existing and new coal capacity by the year 2000. The two primary types of waste management units used by the industry are landfills and surface impoundments. Utility wastes have been exempted by Congress from RCRA Subtitle C hazardous waste regulation since 1980. As a result of this exemption, coal combustion wastes are currently being regulated under Subtitle D of RCRA. As provided under Subtitle D, wastes not classified as hazardous under Subtitle C are subject to State regulation. At the same time Congress developed this exemption, also known as the ''Bevill Exclusion,'' it directed EPA to prepare a report on coal combustion wastes and make recommendations on how they should be managed

  11. Development and testing of industrial scale, coal fired combustion system, Phase 3. Eighteenth quarterly technical progress report, April 1, 1996--June 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Zauderer, B.

    1996-08-18

    In the second quarter of calendar year 1996, 16 days of combust- boiler tests were performed, including 2 days of tests on a parallel DOE sponsored project on sulfur retention in a slagging combustor. Between tests, modifications and improvements that were indicated by these tests were implemented. This brings the total number of test days to the end of June in the task 5 effort to 28, increased to 36 as of the date of this Report, 8/18/96. This compares with a total of 63 test days needed to complete the task 5 test effort. It is important to note that the only major modification to the Williamsport combustor has been the addition of a new downstream section, which lengthens the combustor and improves the combustor-boiler interface. The original combustor section, which includes the fuel, air, and cooling water delivery systems remained basically unchanged. Only the refractory liner was completely replaced, a task which occurs on an annual basis in all commercial slagging utility combustors. Therefore, this combustor has been operated since 1988 without replacement. The tests in the present reporting period are of major significance in that beginning with the first test on March 31st, for the first time slagging opening conditions were achieved in the upgraded combustor. The first results showed that the present 20 MMBtu/hr combustor design is far superior to the previous one tested since 1988 in Williamsport, PA. The most important change is that over 95% of the slag was drained from the slag tap in the combustor. This compares with an range of one-third to one-half in Williamsport. In the latter, the balance of the slag flowed out of the exit nozzle into the boiler floor. In addition, the overall system performance, including the combustor, boiler, and stack equipment, ranged from good to excellent. Those areas requiring improvement were of a nature that could be corrected with some work. but in no case were the problems encountered of a barrier type.

  12. Conference on researches and industrial outlooks on fuel cell and hydrogen; Recherches et perspectives industrielles sur la pile a combustible et l'hydrogene

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This conference aimed at presenting a panorama concerning the research and development of fuel cells and hydrogen and the associated regulation landscape. The first sessions concerned the industrial offer: the strategic advantages as a vehicle fuel, the equipment and the technology, the micro-cell. The second part of the conference concerned the society demand, the difficulties and the research and development programs: the parliamentary offer for the scientific and technological choices evaluation, the energy vector choice, the experiments in particular in Germany, the regulations. (A.L.B.)

  13. Benefits And Humanisation Of The Working Environment By Using Laser Inspection Systems In The Industry

    Science.gov (United States)

    Mueller, Peter; Pietzsch, Karl; Feige, Christian

    1989-02-01

    At a time of rapid development, introduction of new technologies, and increasing world-wide competition, the quality specifications for products and materials becoming even more demanding. This also applies with regard to the avoidance of defects in the surfaces of materials. Consequently there is a need for systems which allow 100% in-line testing of materials and surfaces during the production of, e.g. textiles, data storage media, papers, films and metals. Thanks to its optical and electronical precision, its unlimited applications - even under the most severe conditions-and its absolutely constant acuity, compared with visual inspection, the Sick-Scan-System is an excellent means for improving quality and profits in industrial manufacture, reducing rejects production and thus providing even more customer satisfaction. Here we describe briefly our laser scanner technology. It will set new standards in the area of automatic inspection, and the term laser tested will stablish itself as a mark of quality. In the last few years laser scanning inspection systems have been further developed in collaboration with a large number of materials manufacturers. These systems have been adopted in modern production lines and demonstrate their economy.

  14. Determination of Some Heavy Metals In The Environment of SADAT Industrial City

    International Nuclear Information System (INIS)

    Nassef, M.; EI-Tahawy, M.S.; Hannigan, R.; EL Sayed, K.A.

    2007-01-01

    The aim of this study was to assess the heavy metal concentration in the soil and the groundwater of Sadat City in Egypt and its relation to the highly developed industrial activities in that area. The levels of Pb, Cr, Cu, Cd, Zr, and V were determined in the groundwater samples (as drinking water supplies) and also the same elements in the soil samples. 10 soil samples and 18 groundwater samples were collected from the city. The soil and the groundwater samples were analysed using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The concentration of Pb, Cr, Cu, Cd, Zr, and V measured (in ppm) in the soil samples ranged from 0.48 to 11.3, 0.36 to 2.56, 43.7 to 304.0, 0.34 to 2.64, 0.209 to 21.7, and 0.10 to 17.0, respectively. The concentration of Pb, Cr, Cu, Cd, Zr, and V measured (in ppb) in the groundwater samples of all studied wells ranged from 0.11 to 41.32, 0.10 to 2.63, 0.14 to 5.76, 0.03 to 21.7, 11.4 to 134, and 0.08 to 5.08, respectively. The levels of Pb and Zr exceeded the threshold limits set by the WHO health-based guideline for drinking water in some studied groundwater wells

  15. Corrosion behavior of metals and alloys in marine-industrial environment

    Directory of Open Access Journals (Sweden)

    Mariappan Natesan, Subbiah Selvaraj, Tharmakkannu Manickam and Gopalachari Venkatachari

    2008-01-01

    Full Text Available This work deals with atmospheric corrosion to assess the degrading effects of air pollutants on ferrous and non-ferrous metals and alloys, which are mostly used as engineering materials. An exposure study was conducted in the Tuticorin port area located on the east coast of South India, in the Gulf of Mannar with Sri Lanka to the southeast. Common engineering materials, namely mild steel, galvanized iron, Zn, Al, Cu and Cu–Zn alloys (Cu–27Zn, Cu–30Zn and Cu–37Zn, were used in the investigation. The site was chosen where the metals are exposed to marine and industrial atmospheres. Seasonal 1 to 12 month corrosion losses of these metals and alloys were determined by a weight loss method. The weight losses showed strong corrosion of mild steel, galvanized iron, Cu and Zn and minor effect on Al and Cu–Zn alloys. Linear regression analysis was conducted to study the mechanism of corrosion. The composition of corrosion products formed on the metal surfaces was identified by x-ray diffraction and Fourier transform infrared spectroscopy.

  16. Pharmaceutical contamination in residential, industrial, and agricultural waste streams: risk to aqueous environments in Taiwan.

    Science.gov (United States)

    Lin, Angela Yu-Chen; Yu, Tsung-Hsien; Lin, Cheng-Fang

    2008-12-01

    This is a comprehensive study of the occurrence of antibiotics, hormones and other pharmaceuticals in water sites that have major potential for downstream environmental contamination. These include residential (hospitals, sewage treatment plants, and regional discharges), industrial (pharmaceutical production facilities), and agricultural (animal husbandries and aquacultures) waste streams. We assayed 23 Taiwanese water sites for 97 targeted compounds, of which a significant number were detected and quantified. The most frequently detected compounds were sulfamethoxazole, caffeine, acetaminophen, and ibuprofen, followed closely by cephalexin, ofloxacin, and diclofenac, which were detected in >91% of samples and found to have median (maximum) concentrations of 0.2 (5.8), 0.39 (24.0), 0.02 (100.4), 0.41 (14.5), 0.15 (31.4), 0.14 (13.6) and 0.083 (29.8) microg/L, respectively. Lincomycin and acetaminophen had high measured concentrations (>100 microg/L), and 35 other pharmaceuticals occurred at the microg/L level. These incidence and concentration results correlate well with published data for other worldwide locations, as well as with Taiwanese medication usage data, suggesting a human contamination source. Many pharmaceuticals also occurred at levels exceeding predicted no-effect concentrations (PNEC), warranting further investigation of their occurrence and fate in receiving waters, as well as the overall risks they pose for local ecosystems and human residents. The information provided here will also be useful for development of strategies for regulation and remediation.

  17. Relationships between work environment factors and workers' well-being in the maritime industry.

    Science.gov (United States)

    Nielsen, Morten Birkeland; Bergheim, Kjersti; Eid, Jarle

    2013-01-01

    The aim of this study was to determine whether physical and psychosocial work factors are related to the levels of job satisfaction and intentions to leave in the maritime industry, and to determine whether there exist cross-cultural differences in work factors, job satisfaction and intentions to leave between European and Filipino crew members. Using a cross-sectional survey design, the variables were assessed in a sample of 541 seafarers from 2 large Norwegian shipping companies. Work factors included safety perceptions,leadership, job demands, harassment, and team cohesion. The findings show that physical and psychosocial work factors are important correlates of both intentions to leave and job satisfaction, with safety perceptions, job demands, and team cohesion as the strongest and most consistent factors. As for cross-cultural differences, the findings show that European and Filipino respondents differ with regard to safety perceptions, laissez-faire leadership, authentic leadership,exposure to harassment, team cohesion, and intentions to leave. No differences were established with regard to overall job satisfaction. The findings support occupational stress models which emphasise the importance of situational factors in the understanding of well-being among workers. Shipping companies should therefore always take these factors into consideration when developing and implementing interventions aimed at improving employee well-being.

  18. Investigation of corrosion resistance of alloys with high mechanical characteristics in some environments of food industry

    International Nuclear Information System (INIS)

    Tremoureux, Yves

    1978-01-01

    This research thesis aimed at improving knowledge in the field of stress-free corrosion of alloys with high mechanical characteristics in aqueous environments, at highlighting some necessary aspects of their behaviour during cleaning or disinfection, and at selecting alloys which possess a good stress-free corrosion resistance in view of a later investigation of their stress corrosion resistance. After a presentation of the metallurgical characteristics of high mechanical strength alloys and the report of a bibliographical study on corrosion resistance of these alloys, the author presents and discusses the results obtained in the study of a possible migration of metallic ions in a milk product which is submitted to a centrifugation, and of the corrosion resistance of selected alloys with respect to the different media they will be in contact with during ultra-centrifugation. The following alloys have been used in this research: Marval 18, Marphynox, Marval X12, 17-4PH steel, Inconel 718 [fr

  19. Adaptive inventory management system of an industrial enterprise in the unsteady market environment

    Directory of Open Access Journals (Sweden)

    Dzenzelyuk N.

    2017-01-01

    Full Text Available The article examines the features and problems of methodology of formation of inventory management in a volatile market environment. Currently, there was a need to change the development paradigm of the scaling operations to the more efficient use of resources and capital. In this regard, the high importance of the newly received inventory control problem as an essential component of enterprise resources. The author sets out the basic methodological principles of inventory management systems. The article from the standpoint of the theory of systems and automatic control systems proposed structure adaptive inventory management system. As a criterion of the effectiveness of the joint action is considered the minimum criterion of total costs and expenses associated with the unmet demand. The simulation results confirm the efficiency of the developed model under unforeseen and significant fluctuations in the parameters of stochastic demand.

  20. Development of a coal-fired combustion system for industrial process heating applications. Phase 3 final report, November 1992--December 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-26

    A three phase research and development program has resulted in the development and commercialization of a Cyclone Melting System (CMS{trademark}), capable of being fueled by pulverized coal, natural gas, and other solid, gaseous, or liquid fuels, for the vitrification of industrial wastes. The Phase 3 research effort focused on the development of a process heater system to be used for producing value added glass products from the vitrification of boiler/incinerator ashes and industrial wastes. The primary objective of the Phase 3 project was to develop and integrate all the system components, from fuel through total system controls, and then test the complete system in order to evaluate its potential for successful commercialization. The demonstration test consisted of one test run with a duration of 105 hours, approximately one-half (46 hours) performed with coal as the primary fuel source (70% to 100%), the other half with natural gas. Approximately 50 hours of melting operation were performed vitrifying approximately 50,000 lbs of coal-fired utility boiler flyash/dolomite mixture, producing a fully-reacted vitrified product.

  1. Improving the Psychosocial Work Environment at Multi-Ethnic Workplaces: A Multi-Component Intervention Strategy in the Cleaning Industry

    Directory of Open Access Journals (Sweden)

    Mari-Ann Flyvholm

    2013-10-01

    Full Text Available Global labour migration has increased in recent years and immigrant workers are often recruited into low status and low paid jobs such as cleaning. Research in a Danish context shows that immigrants working in the cleaning industry often form social networks based on shared languages and backgrounds, and that conflict between different ethnic groups may occur. This paper evaluates the impact of a multi-component intervention on the psychosocial work environment at a multi-ethnic Danish workplace in the cleaning sector. The intervention included Danish lessons, vocational training courses, and activities to improve collaboration across different groups of cleaners. Interviews about the outcome of the intervention were conducted with the cleaners and their supervisor. The Copenhagen Psychosocial Questionnaire was used as a supplement to the interviews. The results suggest that the psychosocial work environment had improved after the intervention. According to the interviews with the cleaners, the intervention had led to improved communication, trust, and collaboration. These findings are supported by the questionnaire where social support from supervisor and colleagues, social community, trust, and teamwork seem to have improved together with meaning of work, rewards, and emotional demands. The design of the intervention may provide inspiration for future psychosocial work environment interventions at multi-ethnic work places.

  2. Improving the psychosocial work environment at multi-ethnic workplaces: a multi-component intervention strategy in the cleaning industry.

    Science.gov (United States)

    Smith, Louise Hardman; Hviid, Kirsten; Frydendall, Karen Bo; Flyvholm, Mari-Ann

    2013-10-14

    Global labour migration has increased in recent years and immigrant workers are often recruited into low status and low paid jobs such as cleaning. Research in a Danish context shows that immigrants working in the cleaning industry often form social networks based on shared languages and backgrounds, and that conflict between different ethnic groups may occur. This paper evaluates the impact of a multi-component intervention on the psychosocial work environment at a multi-ethnic Danish workplace in the cleaning sector. The intervention included Danish lessons, vocational training courses, and activities to improve collaboration across different groups of cleaners. Interviews about the outcome of the intervention were conducted with the cleaners and their supervisor. The Copenhagen Psychosocial Questionnaire was used as a supplement to the interviews. The results suggest that the psychosocial work environment had improved after the intervention. According to the interviews with the cleaners, the intervention had led to improved communication, trust, and collaboration. These findings are supported by the questionnaire where social support from supervisor and colleagues, social community, trust, and teamwork seem to have improved together with meaning of work, rewards, and emotional demands. The design of the intervention may provide inspiration for future psychosocial work environment interventions at multi-ethnic work places.

  3. Development of Analytical methods for the evaluation of the impact of phosphate fertilizer industry on marine environment

    International Nuclear Information System (INIS)

    Aoun, M.

    2014-01-01

    Phosphate industries are considered an important potential source of natural radionuclides and heavy metals contamination in the environment. The objective of this work was to assess the marine environmental metallic and radiological pollution and the toxicological impact caused by a large production plant of phosphate fertilizer located on the eastern coast of the Mediterranean Sea, 40 km north of the capital of Lebanon: Beirut. Since 1957 this industry has been producing a large set of phosphate based fertilizers. Phosphogypsum, by-product resulting in the industrial procedure, is released directly in the marine environment. Natural radionuclides (238U, 235U, 226Ra, 232Th, 210Po, 210Pb, and 40K) and anthropogenic 137Cs were measured by alpha and gamma spectrometry in seawater, sediment, coastal sediment and biota. An alpha spectrometer with a passive ion implanted silicon detector was used for the determination of 238U, 234Uin sea water and 210Poin biota samples. 238U, 235U, 232Th, 226Ra,210Pb,137Cs and 40Kin biota and sediments were analyzed by a gamma spectrometer from Canberra, equipped with an extended range low-level coaxial high purity germanium detector with beryllium window.In addition, the radiation exposure of the population surrounding the industrial plant and the internal exposure and potential risks to human due to 210Poand 210Pbassociated with the consumption of fish have been estimated. The internal exposure due to the consumption of fish is important from the radioecology and radioprotection perspectives, and the data for most species studied, are reported for the first time in Lebanon. A multi-elemental method for simultaneous determination of trace elements in seaweeds based on the use of the new approach of collision reaction interface for the ICP-MS determination was optimized. The performance characteristics including linearity, limits of detection and quantification, repeatability, accuracy and truenesswere evaluated. Investigations on the

  4. Release of alpha emitters into the environment by Nuclear Industries of Brazil in Resende, RJ

    International Nuclear Information System (INIS)

    Pereira, Wagner S.; Kelecom, Alphonse; Santos, Rodney; Santos, Maisa F.M.; Torres, Vinicius R.M.; Rodrigues, Jéssica J.S.; Universidade Veiga de Almeida; Universidade Federal Fluminense

    2017-01-01

    The Nuclear Industries of Brazil operates in the field of nuclear energy and has a monopoly on mining and manufacturing the nuclear fuel element in Brazil. The Nuclear Fuel Factory is also responsible for the reconversion process, the manufacture of the pellets and the assembly of the fuel element. Once there is a possibility of particulate material generation during the reconversion processes and the manufacture of pellets, a method of collective protection of the worker was established, which includes a system of air exhaustion of the factory area, with the capacity to renew the indoor air six times per hour. As a control measure, there is a system of automatic detection of the release of radionuclides in the chimney that monitors and calculates the released values. Through the dose calculation model established by the National Commission for Nuclear Energy the release limit is fixed at 1.2∙ 10"7Bq.y"-"1 of alpha emitters by FCN. The present work aims to evaluate the alpha radionuclides released by FCN, in terms of total release (Bq) and Activity Concentration (AC, mBq∙m"-"3). In 2016 it was released 4.14∙10"6Bq.y"-"1, which means an average of 3.45∙10"5Bq.month"-"1. The largest mean for AC was 4.03 mBq∙m"-"3. The release data was almost an order of magnitude lower than the annual release limit, proving the suitability of the atmospheric effluents to the licensing requirements. The largest magnitudes of the two variables (AC and release) were observed in August while the smallest ones, in January. (author)

  5. Problems of Recreational Industry in European Russia: Changes in Infrastructure, Environment, and Climate

    Science.gov (United States)

    Yakovleva, M.; Lyaskovskiy, S. I.

    2011-12-01

    Forest and forest-steppe zones of European Russia have a great potential for recreation, including its active form, tourism. Soft peaceful landscapes and moderate summer climate provide pleasant conditions for family vacations. Numerous lakes and rivers provide places for swimming, boating, and fishing. These pleasant environmental conditions are complemented with abundant recreational choices such as historical places, old cities, towns, and monasteries filled with museums that deliver detailed information about the millennium-long Russian history. There are the vibrant cities, Moscow and St. Petersburg; cities along the Volga River; and the oldest cities in northwestern Russia, Novgorod and Pskov provide numerous options for cultural and entertaining programs for the most demanding travelers. The country has a broad range of private tour operators that cater to national and international travelers. Still there are problems which should be taken into account by travelers who chose to spend their precious vacation time in Russia. Infrastructure problems include a deficit of three-star hotels that are the mainstream of contemporary tourist business. Their number is growing exponentially in the past decade and at present remains insufficient, but the capacity building is progressing favorably. Climatic and environmental changes became a new and unexpected factor affecting the tourist industry in European Russia. Stable and strongly sustainable climate has been interrupted by extreme events that may cause additional discomfort for some people. Tour operators and hotel hosts both need to invest more to confront incremental weather (first of all investments in air conditioning are needed) and/or have substitute travel variants that are of equivalent quality. One of the unresolved issues remains the air quality problem in Moscow due to intense traffic and the possibility of peat fires in the neighboring Shatura region southeast of the city. This increases risks that must

  6. Release of alpha emitters into the environment by Nuclear Industries of Brazil in Resende, RJ

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Wagner S.; Kelecom, Alphonse; Santos, Rodney; Santos, Maisa F.M.; Torres, Vinicius R.M.; Rodrigues, Jéssica J.S., E-mail: comap@inb.gov.br, E-mail: pereiraws@gmail.com, E-mail: lararapls@hotmail.com [Indústrias Nucleares do Brasil (COMAP.N/FCN/INB), Resende RJ (Brazil). Fábrica de Combustível Nuclear. Coordenação de Meio Ambiente e Proteção Radiológica Ambiental; Universidade Veiga de Almeida (UVA), Rio de Janeiro, RJ (Brazil); Universidade Federal Fluminense (LARARA-PLS/UFF), Niterói, RJ (Brazil). Laboratório de Radiobiologia e Radiometria

    2017-07-01

    The Nuclear Industries of Brazil operates in the field of nuclear energy and has a monopoly on mining and manufacturing the nuclear fuel element in Brazil. The Nuclear Fuel Factory is also responsible for the reconversion process, the manufacture of the pellets and the assembly of the fuel element. Once there is a possibility of particulate material generation during the reconversion processes and the manufacture of pellets, a method of collective protection of the worker was established, which includes a system of air exhaustion of the factory area, with the capacity to renew the indoor air six times per hour. As a control measure, there is a system of automatic detection of the release of radionuclides in the chimney that monitors and calculates the released values. Through the dose calculation model established by the National Commission for Nuclear Energy the release limit is fixed at 1.2∙ 10{sup 7}Bq.y{sup -1} of alpha emitters by FCN. The present work aims to evaluate the alpha radionuclides released by FCN, in terms of total release (Bq) and Activity Concentration (AC, mBq∙m{sup -3}). In 2016 it was released 4.14∙10{sup 6}Bq.y{sup -1}, which means an average of 3.45∙10{sup 5}Bq.month{sup -1}. The largest mean for AC was 4.03 mBq∙m{sup -3}. The release data was almost an order of magnitude lower than the annual release limit, proving the suitability of the atmospheric effluents to the licensing requirements. The largest magnitudes of the two variables (AC and release) were observed in August while the smallest ones, in January. (author)

  7. Hybrid environment for software sensors design applied to the petrochemical industry problems; Ambiente hibrido para a concepcao de sensores de software aplicados aos problemas da industria petroquimica

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Bruno X.; Ramalho, Leonardo S.G.; Rodrigues, Igor O.; Martins, Daniel L.; Doria Neto, Adriao D.; Melo, Jorge D.; Oliveira, Luiz A.H.G.G. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    This article will show a hybrid environment for the conception of software sensors in Foundation Fieldbus (FF) industrial network. These sensors are focused on the measurement and control problems in the petroleum industry, more specifically in oil and gas refining, contributing for the efficiency increase and operation costs decrease of a refining process. The software sensors are based on intelligent algorithms, as neural networks, fuzzy logic and genetic algorithms. These algorithms need input data, in this case the historical variables data associated to industrial petrochemical plant. One option allowed by the environment is the data acquisition from a simulated process by the FF network. Then, the environment presents a hybrid feature, since it is composed by a real (the industrial network) and a simulated (the process) part, with the use of real control and measurements signals. The environment is flexible, allowing typical dynamics of industrial process reproduction without necessity of the physical network amendment and enabling the creation of several situations from a real industrial environment. (author)

  8. Combustion Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — For more than 30 years The Combustion Research Facility (CRF) has served as a national and international leader in combustion science and technology. The need for a...

  9. Alcohol combustion chemistry

    KAUST Repository

    Sarathy, Mani; Oß wald, Patrick; Hansen, Nils; Kohse-Hö inghaus, Katharina

    2014-01-01

    . While biofuel production and its use (especially ethanol and biodiesel) in internal combustion engines have been the focus of several recent reviews, a dedicated overview and summary of research on alcohol combustion chemistry is still lacking. Besides

  10. Costs of fuel cycle industrial facilities: an international review; Couts des installations industrielles du cycle du combustible point a l'international

    Energy Technology Data Exchange (ETDEWEB)

    Macias, R.M

    2004-07-01

    This document presents, comments, and compares economic and financial data for industrial facilities concerning different aspects of the nuclear fuel cycle. It first comments the present situation and the short term trends for the natural uranium market, the conversion market, the enrichment market, the reprocessing market, the storage market. It gives an assessment of the elementary costs of the existing facilities for the different stages and processes: reprocessing, spent fuel warehousing (example of the CLAB in Sweden and comparison with other available data), warehousing of all types of wastes (examples of Habog in Netherlands, Zwilag in Switzerland), spent fuel storage (example of Yucca Mountain in the USA, Onkalo in Finland, projects and studies in Sweden), storage of vitrified wastes in Belgium, storing of transuranic wastes in the USA, storage of low and intermediate level and short life wastes in Sweden.

  11. Maximal combustion temperature estimation

    International Nuclear Information System (INIS)

    Golodova, E; Shchepakina, E

    2006-01-01

    This work is concerned with the phenomenon of delayed loss of stability and the estimation of the maximal temperature of safe combustion. Using the qualitative theory of singular perturbations and canard techniques we determine the maximal temperature on the trajectories located in the transition region between the slow combustion regime and the explosive one. This approach is used to estimate the maximal temperature of safe combustion in multi-phase combustion models

  12. Internal and surface phenomena in metal combustion

    Science.gov (United States)

    Dreizin, Edward L.; Molodetsky, Irina E.; Law, Chung K.

    1995-01-01

    Combustion of metals has been widely studied in the past, primarily because of their high oxidation enthalpies. A general understanding of metal combustion has been developed based on the recognition of the existence of both vapor-phase and surface reactions and involvement of the reaction products in the ensuing heterogeneous combustion. However, distinct features often observed in metal particle combustion, such as brightness oscillations and jumps (spearpoints), disruptive burning, and non-symmetric flames are not currently understood. Recent metal combustion experiments using uniform high-temperature metal droplets produced by a novel micro-arc technique have indicated that oxygen dissolves in the interior of burning particles of certain metals and that the subsequent transformations of the metal-oxygen solutions into stoichiometric oxides are accompanied with sufficient heat release to cause observed brightness and temperature jumps. Similar oxygen dissolution has been observed in recent experiments on bulk iron combustion but has not been associated with such dramatic effects. This research addresses heterogeneous metal droplet combustion, specifically focusing on oxygen penetration into the burning metal droplets, and its influence on the metal combustion rate, temperature history, and disruptive burning. A unique feature of the experimental approach is the combination of the microgravity environment with a novel micro-arc Generator of Monodispersed Metal Droplets (GEMMED), ensuring repeatable formation and ignition of uniform metal droplets with controllable initial temperature and velocity. The droplet initial temperatures can be adjusted within a wide range from just above the metal melting point, which provides means to ignite droplets instantly upon entering an oxygen containing environment. Initial droplet velocity will be set equal to zero allowing one to organize metal combustion microgravity experiments in a fashion similar to usual microgravity

  13. Production of nanocrystalline metal powders via combustion reaction synthesis

    Science.gov (United States)

    Frye, John G.; Weil, Kenneth Scott; Lavender, Curt A.; Kim, Jin Yong

    2017-10-31

    Nanocrystalline metal powders comprising tungsten, molybdenum, rhenium and/or niobium can be synthesized using a combustion reaction. Methods for synthesizing the nanocrystalline metal powders are characterized by forming a combustion synthesis solution by dissolving in water an oxidizer, a fuel, and a base-soluble, ammonium precursor of tungsten, molybdenum, rhenium, or niobium in amounts that yield a stoichiometric burn when combusted. The combustion synthesis solution is then heated to a temperature sufficient to substantially remove water and to initiate a self-sustaining combustion reaction. The resulting powder can be subsequently reduced to metal form by heating in a reducing gas environment.

  14. Social and environmental changes: universal peace possible solely through creating of job opportunities in environment industries

    International Nuclear Information System (INIS)

    Dip Ing Mohamad Sani

    2006-01-01

    Until recent there was a speed gap in the traffic branches between the track bound wheel-on-rail systems and aircraft. But this gap is now closing by the super high speed MagLev train on the base of track bound Magnetic Levitation technology. This one may now become one of the key technologies for the 21st century, as it combines essential environmental and economic advantage: i] Its propulsion energy is electricity - which means that Renewable Energies may be applied without reservation, 2] Its ecological advance vice versa aircraft is huge - pollution of the higher atmosphere e.g. differs by a factor 40 per person x kilometer, 3] At a speed of more than 200 km per hour, energy consumption is lower than and maintenance costs range at ca. 3 of which have to be calculated for high speed wheel-on-rail systems, 4] Short distance flights which stress as well the budgets of the airlines as exceptionally the environment, become obsolete where MagLev relations exist. A MagLev connection can be regarded as the quickest relation for passengers at distances of less than ca. 1000 km, 5] Intermodal traffic network as well as airport connections, which enlarge their focus according to the radio telescope system well-known from astronomy, are supported by the super high speed MagLev with a velocity up to 550 km per hour, 6] Zones of excellence and high performance management may be created at MagLev terminals - with global market access provided. By these factors, social development and environmental advance may be well-combined on the base of Renewable Energy use in a modern traffic, distribution and logistic system network

  15. ARK-2: a mobile robot that navigates autonomously in an industrial environment

    International Nuclear Information System (INIS)

    Bains, N.; Nickerson, S.; Wilkes, D.

    1995-01-01

    ARK-2 is a robot that uses a vision system based on a camera and spot laser rangefinder mounted on a pan and tilt unit for navigation. This vision system recognizes known landmarks and computes its position relative to them, thus bounding the error in its position. The vision system is also used to find known gauges, given their approximate locations, and takes readings from them. 'Approximate' in this context means the same sort of accuracy that a human would need: 'down aisle 3 on the right' suffices. ARK-2 is also equipped with the FAD (Floor Anomaly Detector) which is based on the NRC (National Research Council of Canada) BIRIS (Bi-IRIS) sensor, and keeps ARK-2 from failing into open drains or trying to negotiate large cables or pipes on the floor. ARK-2 has also been equipped with a variety of application sensors for security and safety patrol applications. Radiation sensors are used to produce contour maps of radiation levels. In order to detect fires, environmental changes and intruders, ARK-2 is equipped with smoke, temperature, humidity and gas sensors, scanning ultraviolet and infrared detectors and a microwave motion detector. In order to support autonomous, untethered operation for hours at a time, ARK-2 also has onboard systems for power, sonar-based obstacle detection, computation and communications. The project uses a UNIX environment for software development, with the onboard SPARC processor appearing as just another workstation on the LAN. Software modules include the hardware drivers, path planning, navigation, emergency stop, obstacle mapping and status monitoring. ARK-2 may also be controlled from a ROBCAD simulation. (author)

  16. Industrial Fuel Gas Demonstration-Plant Program. Volume II. The environment (Deliverable No. 27). [Baseline environmental data

    Energy Technology Data Exchange (ETDEWEB)

    1979-08-01

    The proposed site of the Industrial Fuel Gas Demonstration Plant (IFGDP) is located on a small peninsula extending eastward into Lake McKeller from the south shore. The peninsula is located west-southwest of the City of Memphis near the confluence of Lake McKeller and the Mississippi River. The environmental setting of this site and the region around this site is reported in terms of physical, biological, and human descriptions. Within the physical description, this report divides the environmental setting into sections on physiography, geology, hydrology, water quality, climatology, air quality, and ambient noise. The biological description is divided into sections on aquatic and terrestrial ecology. Finally, the human environment description is reported in sections on land use, demography, socioeconomics, culture, and visual features. This section concludes with a discussion of physical environmental constraints.

  17. Ventilation and health in non-industrial indoor environments: report from a European Multidisciplinary Scientific Consensus Meeting (EUROVEN)

    DEFF Research Database (Denmark)

    Wargocki, Pawel; Sundell, Jan; Bischof, W.

    2002-01-01

    Scientific literature on the effects of ventilation on health, comfort, and productivity in non-industrial indoor environments (offices, schools, homes, etc.) has been reviewed by a multidisciplinary group of European scientists, called EUROVEN, with expertise in medicine, epidemiology, toxicology......, and engineering. The group reviewed 105 papers published in peer-reviewed scientific journals and judged 30 as conclusive, providing sufficient information on ventilation, health effects, data processing, and reporting, 14 as providing relevant background information on the issue, 43 as relevant but non......-informative or inconclusive, and 18 as irrelevant for the issue discussed. Based on the data in papers judged conclusive, the group agreed that ventilation is strongly associated with comfort (perceived air quality) and health (Sick Building Syndrome (SBS) symptoms, inflammation, infections, asthma, allergy, short-term sick...

  18. Multiple daytime nucleation events in semi-clean savannah and industrial environments in South Africa: analysis based on observations

    Directory of Open Access Journals (Sweden)

    A. Hirsikko

    2013-06-01

    Full Text Available Recent studies have shown very high frequencies of atmospheric new particle formation in different environments in South Africa. Our aim here was to investigate the causes for two or three consecutive daytime nucleation events, followed by subsequent particle growth during the same day. We analysed 108 and 31 such days observed in a polluted industrial and moderately polluted rural environments, respectively, in South Africa. The analysis was based on two years of measurements at each site. After rejecting the days having notable changes in the air mass origin or local wind direction, i.e. two major reasons for observed multiple nucleation events, we were able to investigate other factors causing this phenomenon. Clouds were present during, or in between most of the analysed multiple particle formation events. Therefore, some of these events may have been single events, interrupted somehow by the presence of clouds. From further analysis, we propose that the first nucleation and growth event of the day was often associated with the mixing of a residual air layer rich in SO2 (oxidized to sulphuric acid into the shallow surface-coupled layer. The second nucleation and growth event of the day usually started before midday and was sometimes associated with renewed SO2 emissions from industrial origin. However, it was also evident that vapours other than sulphuric acid were required for the particle growth during both events. This was especially the case when two simultaneously growing particle modes were observed. Based on our analysis, we conclude that the relative contributions of estimated H2SO4 and other vapours on the first and second nucleation and growth events of the day varied from day to day, depending on anthropogenic and natural emissions, as well as atmospheric conditions.

  19. Impact of oil on the marine environment: policy of the Paris Commission on operational discharges from the offshore industry

    International Nuclear Information System (INIS)

    Nihoul, C.; Ducrotoy, J.-P.

    1994-01-01

    The input of oil to the North Sea due to the offshore industry has been estimated at 29% of the total input of oil. The operational discharges consist of production water and drilling cuttings. An overview of statistics collected over the last 10 years shows that although the amount of oil discharged via production water is increasing as platforms are getting older, cuttings still account for 75% of the oil entering the sea as a result of normal operations. Spills represent a relatively small source of oil. The effects on the marine environment of discharges of production water and of discarded oily cuttings have been extensively studied, by national authorities as well as by the industry. Although it has not always been possible to reach consensus about the significance of the observed effects, a number of 'agreed facts' have led to the establishment of regulations in the framework of the Paris Commission. The 'decisions' and 'recommendations' adopted by the Commission are regularly reviewed in the light of new developments. (author)

  20. Uncertainties in hydrogen combustion

    International Nuclear Information System (INIS)

    Stamps, D.W.; Wong, C.C.; Nelson, L.S.

    1988-01-01

    Three important areas of hydrogen combustion with uncertainties are identified: high-temperature combustion, flame acceleration and deflagration-to-detonation transition, and aerosol resuspension during hydrogen combustion. The uncertainties associated with high-temperature combustion may affect at least three different accident scenarios: the in-cavity oxidation of combustible gases produced by core-concrete interactions, the direct containment heating hydrogen problem, and the possibility of local detonations. How these uncertainties may affect the sequence of various accident scenarios is discussed and recommendations are made to reduce these uncertainties. 40 references

  1. Does the Effect of Person-Environment Fit on Work Attitudes Vary with Generations? Insights from the Tourism Industry

    Directory of Open Access Journals (Sweden)

    Bednarska Marlena A.

    2017-03-01

    Full Text Available There is an intrinsic link between the success of service firms and the availability of high-quality human resources, making employee attitudes and behaviors a critical concern for service organizations. This paper examines the role of generational differences in the relationship between person-environment fit, job satisfaction and work engagement in the tourism industry. The study was based on a group of 981 tourism employees in 15 localities in Poland. Data were collected through self-administered paper-based questionnaires. The hypothesized relationships were tested using a hierarchical regression analysis. This research revealed that Generation Y employees experienced lower job satisfaction, lower work engagement, and a lower degree of needs being met in the workplace than did their predecessors. It was also found that person-group fit was a stronger predictor of work attitudes for Millennials. The paper contributes to the ongoing debate on generational diversity in the workplace and its implication for human resources management. Specifically, in the service context, it adds a generational perspective of the person-environment fit influence on work-related attitudes.

  2. Impacts of the manufacturing process using fiberglass reinforced plastic composite on the environment and occupational health: the automotive industry case

    Directory of Open Access Journals (Sweden)

    Cíntia Madureira Orth

    2012-06-01

    Full Text Available The production of fiberglass reinforced plastic composite parts may cause serious damages to the health of workers and/or the environment, especially due to the generation of process trimmings, noise level and gas emission.  In view of that, this essay aims at assessing the main impacts of the Molding and Finish processes of an automotive plant on the environment and occupational health. It was observed that the open molding method adopted by the studied plant is the main cause of the generation of residues and that the waste of raw materials as trimmings may reach up to 30%. The final destination of those trimmings, which represent 45% of all the residues generated by the factory, is the industrial landfill. It was also observed that, due to the use of open molds, the levels of styrene and fiber dust were above the tolerance limits, presenting risks to the health of the workers.  Therefore, the studied company should consider the possibility of adopting less aggressive technologies, such as that used in closed molds. The reduction of the negative impacts of the productive processes in their source should be part of the company’s policy. Furthermore, the prevention must be continuous and improved every day.

  3. New class of combustion processes

    International Nuclear Information System (INIS)

    Merzhanov, A.G.; Borovinskaya, I.P.

    1975-01-01

    A short review is given of the results of work carried out since 1967 on studying the combustion processes caused by the interaction of chemical elements in the condensed phase and leading to the formation of refractory compounds. New phenomena and processes are described which are revealed when investigating the combustion of the systems of this class, viz solid-phase combustion, fast combustion in the condensed phase, filtering combustion, combustion in liquid nitrogen, spinning combustion, self-oscillating combustion, and repeated combustion. A new direction in employment of combustion processes is discussed, viz. a self-propagating high-temperature synthesis of refractory nitrides, carbides, borides, silicides and other compounds

  4. Combustion of environmentally altered molybdenum trioxide nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Kevin; Pantoya, Michelle L. [Mechanical Engineering Department, Texas Tech University, 2500 Broadway, Lubbock, TX 79409 (United States)

    2006-06-15

    Nanocomposite thermite mixtures are currently under development for many primer applications due to their high energy densities, high ignition sensitivity, and low release of toxins into the environment. However, variability and inconsistencies in combustion performance have not been sufficiently investigated. Environmental interactions with the reactants are thought to be a contributing factor to these variabilities. Combustion velocity experiments were conducted on aluminum (Al) and molybdenum trioxide (MoO{sub 3}) mixtures to investigate the role of environmental interactions such as light exposure and humidity. While the Al particles were maintained in an ambient, constant environment, the MoO{sub 3} particles were exposed to UV or fluorescent light, and highly humid environments. Results show that UV and fluorescent lighting over a period of days does not significantly contribute to performance deterioration. However, a humid environment severely decreases combustion performance if the oxidizer particles are not heat-treated. Heat treatment of the MoO{sub 3} greatly increases the material's ability to resist water absorption, yielding more repeatable combustion performance. This work further quantifies the role of the environment in the decrease of combustion performance of nanocomposites over time. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  5. Regulations and standardization relative to the biomass combustion

    International Nuclear Information System (INIS)

    Autret, E.

    2009-01-01

    It does not exist regulations on pollutants emissions on domestic wood burning furnaces, however, these appliances are submitted to the European and french standardization concerning the safety rules, the use rules and the tests methods. Since 2007, these wood burning appliances on the market must have the European Community label. The green flame label was elaborated by the environment and energy control Agency (A.D.E.M.E.), and manufacturers of domestic appliances to promote the use of competitive wood burning appliances. concerning the collective and industrial heating, the installations of more 2 MW are framed by different categories of the installations classified for environment protection (I.C.P.E.) regulation according their fuel and power. The combustion installations of less than 2 MW are a particular case, they are framed by a sanitary department regulation and are controlled by the department directions of sanitary and social affairs. the limit values of emissions are summarized in tables. (N.C.)

  6. A 700 year record of combustion-derived pollution in northern Spain: Tools to identify the Holocene/Anthropocene transition in coastal environments

    International Nuclear Information System (INIS)

    Leorri, Eduardo; Mitra, Siddhartha; Irabien, María Jesús; Zimmerman, Andrew R.; Blake, William H.; Cearreta, Alejandro

    2014-01-01

    There is an uneven geographical distribution of historic records of atmospheric pollutants from SW Europe and those that exist are very limited in temporal extent. Alternative data source is required to understand temporal trends in human impacts on atmospheric pollution. Polycyclic aromatic hydrocarbons (PAHs), heavy metal content and stable Pb isotopic ratios in a sediment core from a salt marsh in northern Spain were used to reconstruct the regional history of contaminant inputs over the last 700 years. Pre-1800s concentrations of Pb and PAHs represented baseline concentrations, i.e. pre-Industrial, conditions. During the initial stages of the Industrial Revolution, 1800s to 1860s, PAH concentrations increased by a factor of about two above baseline levels in the sediment column. By the 1930s, PAH levels reached ca. 10 times pre-Industrial levels and, along with Pb, reached a peak at ca. 1975 CE. Since then, sedimentary PAH and Pb concentrations decreased significantly. A combination of PAH isomer and Pb stable isotope ratios suggests that the contaminant sources are regional, likely derived partially from wood, but mainly coal used by the metallurgic industry in the Basque country since the 1800s and until the 1970s when leaded petrol saw increased use. This chronology of regional atmosphere-derived pollution expands current southwest Europe emission records and shows coastal salt marsh sediments to be useful in reconstructing the Anthropocene. - Highlights: • Historic records of atmospheric pollutant emissions in SW Europe are needed. • PAH and Pb concentrations and ratios from a north Spain salt marsh core were used. • Atmosphere emissions mainly from regional coal burning increased in the early 1800s. • Emissions associated with leaded gasoline peaked in 1975 CE. • The results suggest 1800 CE as the Holocene/Anthropocene transition

  7. A 700 year record of combustion-derived pollution in northern Spain: Tools to identify the Holocene/Anthropocene transition in coastal environments

    Energy Technology Data Exchange (ETDEWEB)

    Leorri, Eduardo, E-mail: leorrie@ecu.edu [Department of Geological Sciences, East Carolina University, Graham Building 103B, Greenville, NC 27858 (United States); Mitra, Siddhartha, E-mail: mitras@ecu.edu [Department of Geological Sciences, East Carolina University, Graham Building 103B, Greenville, NC 27858 (United States); Irabien, María Jesús, E-mail: mariajesus.irabien@ehu.es [Departamento de Mineralogía y Petrología, Facultad de Ciencia y Tecnología, Universidad del País Vasco UPV/EHU, Apartado 644, 48080 Bilbao (Spain); Zimmerman, Andrew R., E-mail: azimmer@ufl.edu [Department of Geological Sciences, University of Florida, 241 Williamson Hall, P.O. Box 112120, Gainesville, FL 32611 (United States); Blake, William H., E-mail: william.blake@plymouth.ac.uk [Consolidated Radioisotope Facility, University of Plymouth, Plymouth (United Kingdom); Cearreta, Alejandro, E-mail: alejandro.cearreta@ehu.es [Departamento de Estratigrafía y Paleontología, Facultad de Ciencia y Tecnología, Universidad del País Vasco UPV/EHU, Apartado 644, 48080 Bilbao (Spain)

    2014-02-01

    There is an uneven geographical distribution of historic records of atmospheric pollutants from SW Europe and those that exist are very limited in temporal extent. Alternative data source is required to understand temporal trends in human impacts on atmospheric pollution. Polycyclic aromatic hydrocarbons (PAHs), heavy metal content and stable Pb isotopic ratios in a sediment core from a salt marsh in northern Spain were used to reconstruct the regional history of contaminant inputs over the last 700 years. Pre-1800s concentrations of Pb and PAHs represented baseline concentrations, i.e. pre-Industrial, conditions. During the initial stages of the Industrial Revolution, 1800s to 1860s, PAH concentrations increased by a factor of about two above baseline levels in the sediment column. By the 1930s, PAH levels reached ca. 10 times pre-Industrial levels and, along with Pb, reached a peak at ca. 1975 CE. Since then, sedimentary PAH and Pb concentrations decreased significantly. A combination of PAH isomer and Pb stable isotope ratios suggests that the contaminant sources are regional, likely derived partially from wood, but mainly coal used by the metallurgic industry in the Basque country since the 1800s and until the 1970s when leaded petrol saw increased use. This chronology of regional atmosphere-derived pollution expands current southwest Europe emission records and shows coastal salt marsh sediments to be useful in reconstructing the Anthropocene. - Highlights: • Historic records of atmospheric pollutant emissions in SW Europe are needed. • PAH and Pb concentrations and ratios from a north Spain salt marsh core were used. • Atmosphere emissions mainly from regional coal burning increased in the early 1800s. • Emissions associated with leaded gasoline peaked in 1975 CE. • The results suggest 1800 CE as the Holocene/Anthropocene transition.

  8. Enhancement of exergy efficiency in combustion systems using flameless mode

    International Nuclear Information System (INIS)

    Hosseini, Seyed Ehsan; Wahid, Mazlan Abdul

    2014-01-01

    Highlights: • Exergy efficiency in flameless combustion mode is 13% more than conventional combustion. • The maximum exergy efficiency in flameless combustion mode is achieved when oxidizer contains 10% oxygen. • Exergy destruction of flameless combustion is maximized when CO 2 is used for dilution of oxidizer. - Abstract: An exergitic-based analysis of methane (CH 4 ) conventional and flameless combustion in a lab-scale furnace is performed to determine the rate of pollutant formation and the effective potential of a given amount of fuel in the various combustion modes. The effects of inlet air temperature on exergy efficiency and pollutant formation of conventional combustion in various equivalence ratios are analyzed. The rate of exergy destruction in different conditions of flameless combustion (various equivalence ratios, oxygen concentration in the oxidizer and the effects of diluent) are computed using three-dimensional (3D) computational fluid dynamic (CFD). Fuel consumption reduction and exergy efficiency augmentation are the main positive consequences of using preheated air temperature in conventional combustion, however pollutants especially NO x formation increases dramatically. Low and moderate temperature inside the chamber conducts the flameless combustion system to low level pollutant formation. Fuel consumption and exergy destruction reduce drastically in flameless mode in comparison with conventional combustion. Exergy efficiency of conventional and flameless mode is 75% and 88% respectively in stoichiometric combustion. When CO 2 is used for dilution of oxidizer, chemical exergy increases due to high CO 2 concentration in the combustion products and exergy efficiency reduces around 2% compared to dilution with nitrogen (N 2 ). Since the rate of irreversibilities in combustion systems is very high in combined heat and power (CHP) generation and other industries, application of flameless combustion could be effective in terms of pollutant

  9. Application of coal combustion residues to the stabilization/solidification of industrial wastes (IRIS); Desarrollo de un Proceso, a Escala Piloto de Inertizacion de Residuos Industriales con Cenizas Volantes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    Stabilization/solidification (S/S) processes, also called inertization processes, are a group of techniques which employ additives to reduce the mobility of the hazardous components from the waste and make possible for the residue to be accepted for its disposal in a safe way. These processes, mainly applied to wastes that contain heavy metals (such as lead, zinc, cadminum, mercury, copper, nickel, titanium, chromium-III, chromium-VI, arsenic,....) change the waste into a solid-like material in which the metals are trapped (nets and matrix) by physical or chemical links. The IRIS Project, carried out by AICIA through the ECSC Coal Programme with the participation of two industrial partners (Sevillana de Electricidad and EGMASA, a public-owned company for waste treatment), has developed, at pilot scale, a new S/S process for inorganic industrial wastes that uses great quantities of fly ash in the place of other more commonly used and expansive reagents. A pilot plant for 200 kg/h has been designed, built and operated. This facility has allowed to add improvements and scientific foundations to existing S/S technology. It has also allowed to obtain industrial scale parameters for fixed and portable plants. Experiencie have been mainly carried out using fly ash from high quality coals, but types of ash have been tested coming from coals with a greater calcium content, from fluidised bed combustion boilers and from desulphurisation processes, giving very suitable characteristics for their application to S/S processes. The addition of fly ash (up to 30%) in the IRIS process improves the results in comparison with the S/S processes that use only cement, because the final pH obtained (8-11) does not allow amphoteric metallic ions to escape in the leachate. The same as other S/S processes, IRIS can be applied also to wastes that contain certain metals (chromium-VI, arsenic, for example) with specific pre-treatments (redox, for example). The efficiency of the IRIS treatment

  10. PSO 7171 - Oxyfuel Combustion for below zero CO2 emissions

    DEFF Research Database (Denmark)

    Toftegaard, Maja Bøg; Brix, Jacob; Hansen, Brian Brun

    for the continuous utilisation of the existing energy producing system in the transformation period. Oxyfuel combustion is one of the possible CCS technologies which show promising perspectives for implementation in industrial scale within a relatively short period of time. Oxyfuel combustion deviates from...

  11. The interaction of combustion pressure oscillations and liner vibrations

    NARCIS (Netherlands)

    Pozarlik, Artur Krzysztof; Kok, Jacobus B.W.

    2006-01-01

    Gas turbine combustors have at industrial scale a thermal power released by combustion of 1 to 400 MW. As the flames in these combustors are very turbulent, the combustion generates high levels of thermo acoustic noise. Of crucial importance for the operation of the engine is not the noise emitted,

  12. A Descriptive Study of Perceived Impact of Gender on Employment Status, Type of Work, Industry Relationships, Working Environment & Job Satisfaction in Livestock Industry Magazines.

    Science.gov (United States)

    Jeffers, Dennis W.

    A two-part study examined the employment status, distribution, job satisfaction, and promotion opportunities of women working for livestock industry magazines. Livestock publications were chosen for this research because they are typical of industry-related magazines and are traditionally dominated by males. The mastheads of 59 magazines were…

  13. Direcionamentos da tecnologia industrial de células a combustível de óxidos sólidos Directions of the industrial development of the solid oxide fuel cells technology

    Directory of Open Access Journals (Sweden)

    Daniel Z. de Florio

    2007-10-01

    Full Text Available This manuscript shows an overview of the solid oxide fuel cell (SOFC technology based on industrial developments. The information presented has been collected mostly at conferences that the authors attended. It is observed that several companies have been pursuing the development of the SOFC technology. Significant advances in stability and power density have raised the economic interest in this technology recently. It is revealed that the SOFC materials are essentially the same ones that have been used in the past decades, and that the two most important designs of pre-commercial SOFC prototypes are the tubular and planar ones.

  14. Being a Child in an Industrial Contemporaneous Environment. Examples from the Mining Mountains of Cartagena-La Unión (Murcia

    Directory of Open Access Journals (Sweden)

    Óscar González Vergara

    2013-05-01

    Full Text Available This paper will discuss various aspects of childhood in an industrial environment, focusing particularly the phenomenon of child labor. We will draw examples from one of the most important industrial mining complex of contemporary Spain, the mining area in Cartagena-La Union, where child labor was widespread. We will complete this vision of childhood with the examples available in the mining songs, which reflect many aspects of childhood.

  15. Fiscal 1998 research report. R and D on advanced combustion technology under microgravity environment; 1998 nendo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research was made on explication of a combustion phenomenon by using a microgravity facility, and a combustor possible to realize advanced combustion technology. In the basic research composed of 5 themes by the international joint research with NASA, 52 drop experiments using JAMIC's facility and 100 drop experiments using NASA's 2.2s drop tower were carried out. The themes are composed of an interaction in droplet arrays combustion, combustion of binary fuel sprays, combustion characteristics of solid fuel, flame dynamics around a lean flammability limit, and mass transfer around a combustion field. In the experiment using the microgravity experiment facility and analysis evaluation of the experimental data, studies were made on combustion and evaporation of fuel droplets, combustion characteristics of dense fuel, flammability limit, formation mechanism of NO{sub x} and an advanced combustor. For applying a pre-evaporating/pre- mixing combustion system to a combustor for aircraft engines, studies were made on some issues such as improvement of a combustion stability, NO{sub x} discharge characteristics, and optimum fuel atomizing. (NEDO)

  16. Fiscal 1998 research report. R and D on advanced combustion technology under microgravity environment; 1998 nendo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research was made on explication of a combustion phenomenon by using a microgravity facility, and a combustor possible to realize advanced combustion technology. In the basic research composed of 5 themes by the international joint research with NASA, 52 drop experiments using JAMIC's facility and 100 drop experiments using NASA's 2.2s drop tower were carried out. The themes are composed of an interaction in droplet arrays combustion, combustion of binary fuel sprays, combustion characteristics of solid fuel, flame dynamics around a lean flammability limit, and mass transfer around a combustion field. In the experiment using the microgravity experiment facility and analysis evaluation of the experimental data, studies were made on combustion and evaporation of fuel droplets, combustion characteristics of dense fuel, flammability limit, formation mechanism of NO{sub x} and an advanced combustor. For applying a pre-evaporating/pre- mixing combustion system to a combustor for aircraft engines, studies were made on some issues such as improvement of a combustion stability, NO{sub x} discharge characteristics, and optimum fuel atomizing. (NEDO)

  17. Combustion modeling in internal combustion engines

    Science.gov (United States)

    Zeleznik, F. J.

    1976-01-01

    The fundamental assumptions of the Blizard and Keck combustion model for internal combustion engines are examined and a generalization of that model is derived. The most significant feature of the model is that it permits the occurrence of unburned hydrocarbons in the thermodynamic-kinetic modeling of exhaust gases. The general formulas are evaluated in two specific cases that are likely to be significant in the applications of the model.

  18. Boiler using combustible fluid

    Science.gov (United States)

    Baumgartner, H.; Meier, J.G.

    1974-07-03

    A fluid fuel boiler is described comprising a combustion chamber, a cover on the combustion chamber having an opening for introducing a combustion-supporting gaseous fluid through said openings, means to impart rotation to the gaseous fluid about an axis of the combustion chamber, a burner for introducing a fluid fuel into the chamber mixed with the gaseous fluid for combustion thereof, the cover having a generally frustro-conical configuration diverging from the opening toward the interior of the chamber at an angle of between 15/sup 0/ and 55/sup 0/; means defining said combustion chamber having means defining a plurality of axial hot gas flow paths from a downstream portion of the combustion chamber to flow hot gases into an upstream portion of the combustion chamber, and means for diverting some of the hot gas flow along paths in a direction circumferentially of the combustion chamber, with the latter paths being immersed in the water flow path thereby to improve heat transfer and terminating in a gas outlet, the combustion chamber comprising at least one modular element, joined axially to the frustro-conical cover and coaxial therewith. The modular element comprises an inner ring and means of defining the circumferential, radial, and spiral flow paths of the hot gases.

  19. Chemistry and radiation in oxy-fuel combustion

    DEFF Research Database (Denmark)

    Yin, Chungen; Rosendahl, Lasse; Kær, Søren Knudsen

    2011-01-01

    In order to investigate the role of combustion chemistry and radiation heat transfer in oxy-fuel combustion modeling, a computational fluid dynamics (CFD) modeling study has been performed for two different oxy-fuel furnaces. One is a lab-scale 0.8MW oxy-natural gas flame furnace whose detailed in....... Among the key issues in combustion modeling, e.g., mixing, radiation and chemistry, this paper derives useful guidelines on radiation and chemistry implementation for reliable CFD analyses of oxy-fuel combustion, particularly for industrial applications....

  20. Lump wood combustion process

    Science.gov (United States)

    Kubesa, Petr; Horák, Jiří; Branc, Michal; Krpec, Kamil; Hopan, František; Koloničný, Jan; Ochodek, Tadeáš; Drastichová, Vendula; Martiník, Lubomír; Malcho, Milan

    2014-08-01

    The article deals with the combustion process for lump wood in low-power fireplaces (units to dozens of kW). Such a combustion process is cyclical in its nature, and what combustion facility users are most interested in is the frequency, at which fuel needs to be stoked to the fireplace. The paper defines the basic terms such as burnout curve and burning rate curve, which are closely related to the stocking frequency. The fuel burning rate is directly dependent on the immediate thermal power of the fireplace. This is also related to the temperature achieved in the fireplace, magnitude of flue gas losses and the ability to generate conditions favouring the full burnout of the fuel's combustible component, which, at once ensures the minimum production of combustible pollutants. Another part of the paper describes experiments conducted in traditional fireplaces with a grate, at which well-dried lump wood was combusted.

  1. Impact of impregnation with boron compounds on combustion ...

    African Journals Online (AJOL)

    user

    2011-04-11

    Apr 11, 2011 ... 2Gazi University, Industrial Arts Education Faculty, Department of ... security. Key words: Combustion, flame retardance, coatings, boron compounds, varnish. ..... attack in wood deterioration and its prevention by preservative.

  2. Challenges faced by franchise entrepreneurs operating in a volatile business environment: a case of the fast food industry in Harare, Zimbabwe

    OpenAIRE

    Knowledge Shumba; Stanislous Zindiye; Gift Donga

    2017-01-01

    Franchising plays a pivotal role in sustainable economic development through employment creation, improving the standards of living and increasing the growth of entrepreneurship worldwide. However, the volatile business environment in Zimbabwe has a negative impact on the growth of franchising in the fast food industry. The aim of the study was to uncover the challenges of franchising in a volatile business environment in Zimbabwe. The study focused on an under studied area of franchising in ...

  3. Research and development achievement report for fiscal 1994 concerning the creation of advanced combustion technologies utilizing the microgravity environment; 1994 nendo bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The development committee concluded an agreement about on-site researches with NASA (National Aeronautics and Space Administration) for an international joint study, and the joint study was started at the underground microgravity center. Experiments were conducted at microgravity experimenting facilities and the data obtained were subjected to analysis and evaluation, which eventually contributed to the accumulation of useful data. In this fiscal year, microgravity experimenting facilities were utilized for experiments and tests for (1) the evaluation of the combustion and vaporization of fuel droplets and fuel droplet arrays, (2) analysis and evaluation of high-density fuel combustion characteristics, (3) evaluation of flammability limits, and (4) elucidation of the mechanism of the generation of NOx and the like. A total of 112 drop tests were conducted, and the acquired data were subjected to analysis and evaluation for the elucidation of the combustion mechanism, and findings were collected as mentioned below. Learned were the combustion behavior of fuel droplets such as ignition and flame propagation under item (1), combustion behavior such as ignition and combustion of high-density fuel under item (2), combustion behavior and combustion limits of premixed fuel under (3), and measurement of distribution of combustion products such as OH in the droplet fuel flaming zone under item (4). (NEDO)

  4. Study on a Preliminary Survey and Analysis of HLW Management Technology Suitable for Nuclear Industrial Environment in Korea

    International Nuclear Information System (INIS)

    Kim, Eun Ka; Suh, In Suk; Ro, Seong Gy; Yoo, Kun Joong; Yoo, Jae Hyung; Cho, Sung Soo

    2010-12-01

    The purpose of this study is to suggest development direction of related technologies to analyze patented technology filed as a leading technology and to identify the technology trend for developing HLW management technology suitable for atomic industrial environment in Korea. For patent analysis of HLW management technology, international patent data were collected. And international application number, patent share of applicant and nationality, annual number of applications, application trends of assignees and detail technology, and frequency of patent citations / citations-to were analyzed by statistical analysis. Technical level and competitiveness through quantitative analysis by indicators of patent analysis were confirmed. And technology developments of blank technology, similarity analysis, the point of the main patent and a range of patent rights were analyzed through in-depth analysis. Trends of the patented technology of our country and world patent technology in such results have been identified, and statistical data on patents were secured. Especially in HLW management technology, patent application in Korea compared ti United States, Japan and European Union was began much later for the '90s, and are showing the annual increase on trend of patent application. Patent trend in Korea corresponds to development generation, while declining in foreign patent. The result of this study will be usefully applied to setting a development direction and blank technology of patent technology to pursue future in Korea

  5. Combustion properties of kraft black liquors; Mustalipeaen koostumuksen vaikutus lipeaen poltto-ominaisuuksiin

    Energy Technology Data Exchange (ETDEWEB)

    Alen, R.; Siistonen, H.; Heikkinen, T.; Malkavaara, P. [Jyvaeskylae Univ. (Finland)

    1996-12-01

    The aim of this work is to study the combustion properties of kraft black liquors from modified cooking. Both the industrial and laboratory-made black liquors are included. In addition, changes in the combustion properties of the spent liquors obtained by mixing prior to combustion different chlorine-free bleach liquors with black liquor are studied. (author)

  6. Operational measurements in radioprotection in the industrial and medical environments; Mesures operationnelles en radioprotection dans les milieux industriel et medical

    Energy Technology Data Exchange (ETDEWEB)

    Rodde, S.; Vial, Th.; Truffert, H.; Kramar, R.; Batalla, A.; Roine, Ph.; Pin, A.; Lahaye, Th.; Rodde, S.; Bordy, J.M.; Paquet, F.; Veres, A.; Cadiou, A.; Branthonne, J.Y.; Noel, A.; Laloubere, L.; Moreau, St.; Gensdarmes, F.; Marques, S.; Lestang, M.; Valendru, N.; Tranchant, Ph.; Martel, P.; Bernhard, S.; Chareyre, P.; Gardin, I.; Casanova, Ph.; De Vita, A.; Tenailleau, L.; Masson, B.; Feret, B.; Guerin, M.; Guillot, L.; Gaultier, E.

    2009-07-01

    This document gathers the slides of the available presentations given during these conference days. Thirty presentations are assembled in the document and deal with: 1 - enforcement circular of the labor code dispositions relative to workers protection against ionizing radiation hazards (T. Lahaye); 2 - context and regulatory evolutions - public health code (S. Rodde); 3 - references and perspectives in external dosimetry (J.M. Bordy); 4 - CIPR's Committee 2 works (F. Paquet); 5 - from protection data to measurement data (A. Pin); 6 - dosimetric control in radiotherapy (A. Veres); 7 - calibration of irradiation measurement devices in industrial environment (A. Cadiou); 8 - calibration and verification of nuclear measurement devices (J.Y. Branthonne); 9 - calibration of measurement devices in medical environment (J.M. Bordy); 10 - quality control in radiotherapy (A. Batalla); 11 - in-vivo dosimetry in radiotherapy (A. Noel); 12 - calibration metrology of fixed post irradiation sensors (L. Laloubere); 13 - design requirements for the radiological zoning and the wastes cleanliness of Flamanville 3 EPR reactor (S. Moreau); 14 - efficiency of aerosol capture systems used in CNPE EDF (F. Gensdarmes); 15 - mobile surveillance means of the atmospheric contamination of CNPE EDF's reactor building (S. Marques and M. Lestang); 16 - experience feedback about the security gates at EDF's nuclear facilities (N. Valendru); 17 - metrology needs for radioprotection technical controls (P. Tranchant); 18 - technical evaluation of a flowmeter/dosemeter in the framework of the regulatory control of X-ray electric generators used in radio-diagnosis (P. Martel); 19 - reinforced natural radioactivity - the case of radon measurement (S. Bernhard); 20 - fires during radioactive materials transport (P. Chareyre); 21 - measurement in the framework of medical examinations: radiology service (A. Noel); 22 - operational measurements in nuclear medicine (I. Gardin); 23 - from the

  7. 15. round - possibilities and challenges. Environment - consequences to the fishery, rearing and coast-located industry in general

    International Nuclear Information System (INIS)

    Larsen, L.-H.

    1995-01-01

    The conference paper deals with environmental aspects connected to the 15. round of exploration on the Norwegian continental shelf. The consequences to fisheries, rearing industry and coast-located industry in general, are briefly discussed

  8. Flameless Combustion Workshop

    National Research Council Canada - National Science Library

    Gutmark, Ephraim

    2005-01-01

    .... "Flameless Combustion" is characterized by high stability levels with virtually no thermoacoustic instabilities, very low lean stability limits and therefore extremely low NOx production, efficient...

  9. Research Combustion Laboratory (RCL)

    Data.gov (United States)

    Federal Laboratory Consortium — The Research Combustion Laboratory (RCL) develops aerospace propulsion technology by performing tests on propulsion components and materials. Altitudes up to 137,000...

  10. Combustion Byproducts Recycling Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

    2008-08-31

    Ashlines: To promote and support the commercially viable and environmentally sound recycling of coal combustion byproducts for productive uses through scientific research, development, and field testing.

  11. Catalytic combustion in small wood burning appliances

    Energy Technology Data Exchange (ETDEWEB)

    Oravainen, H. [VTT Energy, Jyvaeskylae (Finland)

    1996-12-31

    There is over a million hand fired small heating appliances in Finland where about 5,4 million cubic meters of wood fuel is used. Combustion in such heating appliances is a batch-type process. In early stages of combustion when volatiles are burned, the formation of carbon monoxide (CO) and other combustible gases are difficult to avoid when using fuels that have high volatile matter content. Harmful emissions are formed mostly after each fuel adding but also during char burnout period. When the CO-content in flue gases is, say over 0.5 %, also other harmful emissions will be formed. Methane (CH{sub 4}) and other hydrocarbons are released and the amount of polycyclic aromatic hydrocarbons (PAH)-compounds can be remarkable. Some PAH-compounds are very carcinogenic. It has been estimated that in Finland even more than 90 % of hydrocarbon and PAH emissions are due to small scale wood combustion. Emissions from transportation is excluded from these figures. That is why wood combustion has a net effect on greenhouse gas phenomena. For example carbon monoxide emissions from small scale wood combustion are two fold compared to that of energy production in power plants. Methane emission is of the same order as emission from transportation and seven fold compared with those of energy production. Emissions from small heating appliances can be reduced by developing the combustion techniques, but also by using other means, for example catalytic converters. In certain stages of the batch combustion, temperature is not high enough, gas mixing is not good enough and residence time is too short for complete combustion. When placed to a suitable place inside a heating appliance, a catalytic converter can oxidize unburned gases in the flue gas into compounds that are not harmful to the environment. (3 refs.)

  12. Catalytic combustion in small wood burning appliances

    Energy Technology Data Exchange (ETDEWEB)

    Oravainen, H [VTT Energy, Jyvaeskylae (Finland)

    1997-12-31

    There is over a million hand fired small heating appliances in Finland where about 5,4 million cubic meters of wood fuel is used. Combustion in such heating appliances is a batch-type process. In early stages of combustion when volatiles are burned, the formation of carbon monoxide (CO) and other combustible gases are difficult to avoid when using fuels that have high volatile matter content. Harmful emissions are formed mostly after each fuel adding but also during char burnout period. When the CO-content in flue gases is, say over 0.5 %, also other harmful emissions will be formed. Methane (CH{sub 4}) and other hydrocarbons are released and the amount of polycyclic aromatic hydrocarbons (PAH)-compounds can be remarkable. Some PAH-compounds are very carcinogenic. It has been estimated that in Finland even more than 90 % of hydrocarbon and PAH emissions are due to small scale wood combustion. Emissions from transportation is excluded from these figures. That is why wood combustion has a net effect on greenhouse gas phenomena. For example carbon monoxide emissions from small scale wood combustion are two fold compared to that of energy production in power plants. Methane emission is of the same order as emission from transportation and seven fold compared with those of energy production. Emissions from small heating appliances can be reduced by developing the combustion techniques, but also by using other means, for example catalytic converters. In certain stages of the batch combustion, temperature is not high enough, gas mixing is not good enough and residence time is too short for complete combustion. When placed to a suitable place inside a heating appliance, a catalytic converter can oxidize unburned gases in the flue gas into compounds that are not harmful to the environment. (3 refs.)

  13. Combustion modeling in advanced gas turbine systems

    Energy Technology Data Exchange (ETDEWEB)

    Smoot, L.D.; Hedman, P.O.; Fletcher, T.H. [Brigham Young Univ., Provo, UT (United States)] [and others

    1995-10-01

    The goal of the U.S. Department of Energy`s Advanced Turbine Systems (ATS) program is to help develop and commercialize ultra-high efficiency, environmentally superior, and cost competitive gas turbine systems for base-load applications in the utility, independent power producer, and industrial markets. Combustion modeling, including emission characteristics, has been identified as a needed, high-priority technology by key professionals in the gas turbine industry.

  14. Combustion Stratification for Naphtha from CI Combustion to PPC

    KAUST Repository

    Vallinayagam, R.; Vedharaj, S.; An, Yanzhao; Dawood, Alaaeldin; Izadi Najafabadi, Mohammad; Somers, Bart; Johansson, Bengt

    2017-01-01

    This study demonstrates the combustion stratification from conventional compression ignition (CI) combustion to partially premixed combustion (PPC). Experiments are performed in an optical CI engine at a speed of 1200 rpm for diesel and naphtha (RON

  15. 40 CFR Table 1 to Subpart Kkkk of... - Nitrogen Oxide Emission Limits for New Stationary Combustion Turbines

    Science.gov (United States)

    2010-07-01

    ... Stationary Combustion Turbines 1 Table 1 to Subpart KKKK of Part 60 Protection of Environment ENVIRONMENTAL... Standards of Performance for Stationary Combustion Turbines Pt. 60, Subpt. KKKK, Table 1 Table 1 to Subpart KKKK of Part 60—Nitrogen Oxide Emission Limits for New Stationary Combustion Turbines Combustion...

  16. 40 CFR 60.1810 - How do I monitor the load of my municipal waste combustion unit?

    Science.gov (United States)

    2010-07-01

    ... municipal waste combustion unit? 60.1810 Section 60.1810 Protection of Environment ENVIRONMENTAL PROTECTION... Guidelines and Compliance Times for Small Municipal Waste Combustion Units Constructed on or Before August 30... combustion unit? (a) If your municipal waste combustion unit generates steam, you must install, calibrate...

  17. 40 CFR 62.15145 - What are the operating practice requirements for my municipal waste combustion unit?

    Science.gov (United States)

    2010-07-01

    ... requirements for my municipal waste combustion unit? 62.15145 Section 62.15145 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Good Combustion Practices: Operating Requirements § 62.15145 What are the operating practice requirements for my municipal waste combustion unit? (a) You...

  18. Low emission turbulent technology for fuel combustion

    International Nuclear Information System (INIS)

    Finker, F. Z.; Kubyshkin, I. B.; Zakharov, B. Yu.; Akhmedov, D. B.; Sobchuk, Ch.

    1997-01-01

    The company 'POLITEKHENERGO' in co-operation and the Russian-Poland firm 'EnergoVIR' have performed investigations for modernization of the current existing boilers. A low emission turbulent technology has been used for the modernization of 10 industrial boilers. The reduction of NO x emissions is based on the following processes: 1) multistage combustion assured by two counter-deviated fluxes; 2) Some of the combustion facilities have an abrupt slope and a reduced air supply which leads to an intense separation of the fuel in the bottom part and a creation of a low-temperature combustion zone where the active restoration of the NO x takes part; 3) The influence of the top high-temperature zone on the NO x formation is small. Thus the 'sandwich' consisting of 'cold' and'hot' combustion layers provides a full rate combustion. This technique permits to: decrease of the NO x and CO x down to the European standard values;increase of the efficiency in 1-2%; obtain a stable coal combustion up to 97-98%; assure the large loading range (30 -100%); modernize and use the old boilers

  19. Methodology for monitoring aquatic environment impacts derived from petrochemical and similar industries; Metodologia para monitoramento de impactos ambientais sobre o meio aquatico provenientes de industria petroquimica e afins

    Energy Technology Data Exchange (ETDEWEB)

    Sperling, Eduardo von [Minas Gerais Univ., Belo Horizonte, MG (Brazil)

    1994-12-31

    Methodological suggestions concerning the implementation of monitoring programs in aquatic environments subjected to impacts derived from petrochemical industries are presented. Some considerations are made about assessment criteria, with emphasis in the utilization hydro biological indicators, whose response capacity is far superior than that of the physicochemical parameters. (author). 1 ref.

  20. Prostate cancer surveillance by occupation and industry: the Canadian Census Health and Environment Cohort (CanCHEC).

    Science.gov (United States)

    Sritharan, Jeavana; MacLeod, Jill; Harris, Shelley; Cole, Donald C; Harris, Anne; Tjepkema, Michael; Peters, Paul A; Demers, Paul A

    2018-04-01

    As there are no well-established modifiable risk factors for prostate cancer, further evidence is needed on possible factors such as occupation. Our study uses one of the largest Canadian worker cohorts to examine occupation, industry, and prostate cancer and to assess patterns of prostate cancer rates. The Canadian Census Health and Environment Cohort (CanCHEC) was established by linking the 1991 Canadian Census Cohort to the Canadian Cancer Database (1969-2010), Canadian Mortality Database (1991-2011), and Tax Summary Files (1981-2011). A total of 37,695 prostate cancer cases were identified in men aged 25-74 based on age at diagnosis. Cox proportional hazards models were used to estimate hazards ratios and 95% confidence intervals. In men aged 25-74 years, elevated risks were observed in the following occupations: senior management (HR = 1.12, 95% CI: 1.04-1.20); office and administration (HR = 1.19, 95% CI: 1.11-1.27); finance services (HR = 1.09, 95% CI: 1.04-1.14); education (HR = 1.05, 95% CI: 1.00-1.11); agriculture and farm management (HR = 1.12, 95% CI: 1.06-1.17); farm work (HR = 1.11, 95% CI: 1.01-1.21); construction managers (HR = 1.07, 95% CI: 1.01-1.14); firefighting (HR = 1.17, 95% CI: 1.01-1.36); and police work (HR = 1.22, 95% CI: 1.09-1.36). Decreased risks were observed across other construction and transportation occupations. Results by industry were consistent with occupation results. Associations were identified for white-collar, agriculture, protective services, construction, and transportation occupations. These findings emphasize the need for further study of job-related exposures and the potential influence of nonoccupational factors such as screening practices. © 2018 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.