Thermo-hydrodynamic and inductive modelling of a glass melt elaborated in cold inductive crucible

International Nuclear Information System (INIS)

Sauvage, E.

2009-11-01

Within the context of a search for a new vitrification process for nuclear wastes with a replacement of the presently used metallic pot by an inductive cold crucible, this research thesis deals with the numerical modelling of this technology. After having recalled the interest of nuclear waste vitrification, this report presents the new process based on the use of a cold crucible, describing principles and objectives of this method, and the characteristic physical phenomena associated with the flow and the thermodynamics of the glassy melt in such a crucible. It also recalls and comments the existing works on modelling. The main objective of this research is then to demonstrate the feasibility of 3D thermo-hydraulic and inductive simulations. He describes and analyses the glass physical properties (electrical properties, viscosity, thermal properties), the electromagnetic, hydrodynamic and thermal phenomena. He presents in detail the bubbling mixing modelling, reports 3D induction and fluid mechanical coupling calculations, and specific thermal investigations (radiating transfers, thermal limit conditions)

Skull Bone Defects Reconstruction with Custom-Made Titanium Graft shaped with Electron Beam Melting Technology: Preliminary Experience in a Series of Ten Patients.

Science.gov (United States)

Francaviglia, Natale; Maugeri, Rosario; Odierna Contino, Antonino; Meli, Francesco; Fiorenza, Vito; Costantino, Gabriele; Giammalva, Roberto Giuseppe; Iacopino, Domenico Gerardo

2017-01-01

Cranioplasty represents a challenge in neurosurgery. Its goal is not only plastic reconstruction of the skull but also to restore and preserve cranial function, to improve cerebral hemodynamics, and to provide mechanical protection of the neural structures. The ideal material for the reconstructive procedures and the surgical timing are still controversial. Many alloplastic materials are available for performing cranioplasty and among these, titanium still represents a widely proven and accepted choice. The aim of our study was to present our preliminary experience with a "custom-made" cranioplasty, using electron beam melting (EBM) technology, in a series of ten patients. EBM is a new sintering method for shaping titanium powder directly in three-dimensional (3D) implants. To the best of our knowledge this is the first report of a skull reconstruction performed by this technique. In a 1-year follow-up no postoperative complications have been observed and good clinical and esthetic outcomes were achieved. Costs higher than those for other types of titanium mesh, a longer production process, and the greater expertise needed for this technique are compensated by the achievement of most complex skull reconstructions with a shorter operative time.

Effect Of Turbulence Modelling In Numerical Analysis Of Melting Process In An Induction Furnace

Directory of Open Access Journals (Sweden)

Buliński P.

2015-09-01

Full Text Available In this paper, the velocity field and turbulence effects that occur inside a crucible of a typical induction furnace were investigated. In the first part of this work, a free surface shape of the liquid metal was measured in a ceramic crucible. Then a numerical model of aluminium melting process was developed. It took into account coupling of electromagnetic and thermofluid fields that was performed using commercial codes. In the next step, the sensitivity analysis of turbulence modelling in the liquid domain was performed. The obtained numerical results were compared with the measurement data. The performed analysis can be treated as a preliminary approach for more complex mathematical modelling for the melting process optimisation in crucible induction furnaces of different types.

Radiation dose and cancer risk to children undergoing skull radiography

International Nuclear Information System (INIS)

Mazonakis, Michael; Damilakis, John; Raissaki, Maria; Gourtsoyiannis, Nicholas

2004-01-01

Background: Limited data exist in the literature concerning the patient-effective dose from paediatric skull radiography. No information has been provided regarding organ doses, patient dose during PA skull projection, risk of cancer induction and dose to comforters, i.e. individuals supporting children during exposure. Objective: To estimate patient-effective dose, organ doses, lifetime cancer mortality risk to children and radiation dose to comforters associated with skull radiography. Materials and methods: Data were collected from 136 paediatric examinations, including AP, PA and lateral skull radiographs. Entrance-surface dose (ESD) and dose to comforters were measured using thermoluminescent dosimeters. Patients were divided into the following age groups: 0.5-2, 3-7, 8-12 and 13-18 years. The patient-effective dose and corresponding organ doses were calculated using data from the NRPB and Monte Carlo techniques. The risk for fatal cancer induction was assessed using appropriate risk coefficients. Results: For AP, PA and lateral skull radiography, effective dose ranges were 8.8-25.4, 8.2-27.3 and 8.4-22.7 μSv respectively, depending upon the age of the child. For each skull projection, the organs receiving doses above 10 μGy are presented. The number of fatal cancers was found to be less than or equal to 2 per 1 million children undergoing a skull radiograph. The mean radiation dose absorbed by the hands of comforters was 13.4 μGy. Conclusions: The current study provides detailed tabular and graphical data on ESD, effective dose, organ doses and lifetime cancer mortality risk to children associated with AP, PA and lateral skull projections at all patient ages. (orig.)

Compilation of information on modeling of inductively heated cold crucible melters

International Nuclear Information System (INIS)

Lessor, D.L.

1996-03-01

The objective of this communication, Phase B of a two-part report, is to present information on modeling capabilities for inductively heated cold crucible melters, a concept applicable to waste immobilization. Inductively heated melters are those in which heat is generated using coils around, rather than electrodes within, the material to be heated. Cold crucible or skull melters are those in which the melted material is confined within unmelted material of the same composition. This phase of the report complements and supplements Phase A by Loren Eyler, specifically by giving additional information on modeling capabilities for the inductively heated melter concept. Eyler discussed electrically heated melter modeling capabilities, emphasizing heating by electrodes within the melt or on crucible walls. Eyler also discussed requirements and resources for the computational fluid dynamics, heat flow, radiation effects, and boundary conditions in melter modeling; the reader is referred to Eyler's discussion of these. This report is intended for use in the High Level Waste (HLW) melter program at Hanford. We sought any modeling capabilities useful to the HLW program, whether through contracted research, code license for operation by Department of Energy laboratories, or existing codes and modeling expertise within DOE

Crucible and coil monitoring during melting operation in induction crucible furnaces; Tiegel- und Spulenueberwachung beim Schmelzbetrieb von Induktionstiegeloefen

Energy Technology Data Exchange (ETDEWEB)

Doetsch, Erwin; Forsthoevel, Christoph; Rische, Marco [ABP Induction Systems GmbH, Dortmund (Germany)

2013-03-15

The immediate proximity of the metal melt, with a temperature of up to above, 1600 C, to the induction coil in inductive melting necessitates highly reliable monitoring systems, in order to prevent dangerous contact between the melt and the cooling-water-conducting copper section. Ground-fault monitoring, in which the electrical resistance between the melt and the coil is continuously measured, is a standard solution for this function. Everyday use of this long-established system has been made more dependable by automating a number of functions, and the system has also been adapted to modern plant technology, including synchronous tandem operation of two crucible furnaces from a common converter power supply, for example. Measurement of frequency and effective power, as a function of wall thickness, is a supplementary monitoring strategy. Processing of the measured data in the melt processor, in combination with visual assessment, permits appraisal of the integral crucible state and reliable estimation of the remaining service-life of the current crucible. (orig.)

Anisotropic composite human skull model and skull fracture validation against temporo-parietal skull fracture.

Science.gov (United States)

Sahoo, Debasis; Deck, Caroline; Yoganandan, Narayan; Willinger, Rémy

2013-12-01

A composite material model for skull, taking into account damage is implemented in the Strasbourg University finite element head model (SUFEHM) in order to enhance the existing skull mechanical constitutive law. The skull behavior is validated in terms of fracture patterns and contact forces by reconstructing 15 experimental cases. The new SUFEHM skull model is capable of reproducing skull fracture precisely. The composite skull model is validated not only for maximum forces, but also for lateral impact against actual force time curves from PMHS for the first time. Skull strain energy is found to be a pertinent parameter to predict the skull fracture and based on statistical (binary logistical regression) analysis it is observed that 50% risk of skull fracture occurred at skull strain energy of 544.0mJ. © 2013 Elsevier Ltd. All rights reserved.

The effects of vacuum induction melting and electron beam melting techniques on the purity of NiTi shape memory alloys

Energy Technology Data Exchange (ETDEWEB)

Otubo, J. [Instituto Tecnologico de Aeronautica (ITA), 12228-900 S.J. Campos, SP (Brazil) and DEMA-FEM-UNICAMP, 13083-000 Campinas, SP (Brazil)]. E-mail: jotubo@ita.br; Rigo, O.D. [DEMA-FEM-UNICAMP, 13083-000 Campinas, SP (Brazil); Neto, C. Moura [Instituto Tecnologico de Aeronautica (ITA), 12228-900 S.J. Campos, SP (Brazil); Mei, P.R. [DEMA-FEM-UNICAMP, 13083-000 Campinas, SP (Brazil)

2006-11-25

The usual process to produce NiTi shape memory alloys is by vacuum induction melting (VIM) using graphite crucible that contaminates the bath with carbon. The contamination by oxygen comes from residual oxygen inside the melting chamber. A new alternative process to produce NiTi alloys is by electron beam melting (EBM) using water-cooled copper crucible that eliminates the carbon contamination and the oxygen contamination would be minimized due to operation in high vacuum. This work compares the two processes and shows that the carbon contamination is four to ten times lower for EBM compared to VIM products and that the final oxygen content is much more dependent on the starting raw materials. The purity of the final product should be very important mainly in terms of biomedical applications and the contaminations by carbon and oxygen affect the direct and reverse martensitic transformation temperatures.

Melting method for miscellaneous radioactive solid waste and melting furnace

International Nuclear Information System (INIS)

Osaki, Toru; Furukawa, Hirofumi; Uda, Nobuyoshi; Katsurai, Kiyomichi

1998-01-01

A vessel containing miscellaneous solid wastes is inserted in a crucible having a releasable material on the inner surface, they are induction-heated from the outside of the crucible by way of low temperature heating coils to melt low melting point materials in the miscellaneous wastes within a temperature range at which the vessel does not melt. Then, they are induction-heated by way of high temperature heating coils to melt the vessel and not yet melted materials, those molten materials are cooled, solidified molten material and the releasable material are taken out, and then the crucible is used again. Then, the crucible can be used again, so that it can be applied to a large scaled melting furnace which treats wastes by a unit of drum. In addition, since the cleaning of the used crucible and the application of the releasable material can be conducted without interrupting the operation of the melting furnace, the operation cycle of the melting furnace can be shortened. (N.H.)

Kinetics of the melting front movement in process of centrifugal induction surfacing of powder material with nanoscale modificaters

Science.gov (United States)

Sasnouski, I.; Kurylionak, A.

2018-03-01

For solving the problem of improving the powder coatings modified by nanostructure components obtained by induction surfacing method tribological characteristics it is necessary to study the kinetics of the powdered layer melting and define the minimum time of melting. For powdered layer predetermined temperature maintenance at sintering mode stage it is required to determine the temperature difference through blank thickness of the for one hundred-day of the define the warm-up swing on of the stocking up by solving the thermal conductivity stationary problem for quill (hollow) cylinder with internal heat source. Herewith, since in practice thickness of the cylinder wall is much less then its diameter and the temperature difference is comparatively small, the thermal conductivity dependence upon the temperature can be treated as negligible. As it was shown by our previous studies, in the induction heating process under powdered material centrifugal surfacing (i.e. before achieving the melting temperature) the temperature distribution in powdered layer thickness may be considered even. Hereinafter, considering the blank part induction heating process quasi-stationarity under Fo big values, it is possible to consider its internal surface heating as developing with constant velocity. As a result of development the melting front movement mathematical model in a powdered material with nanostructure modifiers the minimum surfacing time is defined. It allows to minimize negative impact of thermal influence on formation of applied coating structure, to raise productivity of the process, to lower power inputs and to ensure saving of nonferrous and high alloys by reducing the allowance for machining. The difference of developed mathematical model of melting front movement from previously known is that the surface temperature from which the heat transfer occures is a variable and varies with a time after the linear law.

Crystallization of nuclear glass under a thermal gradient: application to the self-crucible produced in the skull melting process

International Nuclear Information System (INIS)

Delattre, O.

2013-01-01

In the context of the vitrification of high level nuclear waste, a new industrial process has been launched in 2010 at the La Hague factory: The skull melting process. This setup applies thermal gradients to the melt, which leads to the formation of a solid layer of glass: the 'self-crucible'. The question would be to know whether these thermal gradients have an impact or not on the crystallization behaviour of the considered glasses in the self crucible. In order to answer that question, the crystallization of two glass compositions of nuclear interest has been investigated with an image analysis based method in isothermal and thermal gradient heat treatments conditions. The isothermal experiments allow for the quantification (growth speed, nucleation, crystallized fraction) of the crystallization of apatites (660 C-900 C) and powellites (630 C-900 C). The comparison of the results obtained through these two types of experimentations allows us to conclude that there is no impact of the thermal gradient on the crystallization of the studied glass compositions. In order to complete the image analysis study (based on surfaces), in and ex situ microtomography experiments have been performed at ESRF (Grenoble) on the ID19 beamline. This study allowed us to follow the crystallization of apatites in a simplified glass and to confirm the reliability of the image analysis method based on the analysis of surfaces. (author) [fr

Development of MHI's induction melting system for low level radio active solid waste treatment

International Nuclear Information System (INIS)

Murakami, Tadashi; Hashiba, Kenji; Fukui, Hiroshi; Sato, Akio; Minemoto, Masaki

1999-01-01

Mitsubishi Heavy Industries, Ltd., (MHI) has developed melting facilities that reduce radioactive waste volume. The system uses a high-frequency induction to separately melt nonmetallic waste in SUS containers and metallic waste. Use of system extends refractory life. To validate system feasibility, major components were tested with the following results: (1) Two 200-liter drum cans of molten solid waste are produced per work day, (2) Radioactivity in molten solid was homogeneous with a coefficient of variation ≤10%, clarifying residue properties, (3) The radioactive decontamination factor of off-gas facilities --DF=Activity to system/Activity at the system exit --exceeded 10 7 . We confirmed system to fill the requirements for molten solid waste and have the merit of high volume-reduction and long-life refractory. (author)

High quality vacuum induction melting of small quantities of NiTi shape memory alloys in graphite crucibles

International Nuclear Information System (INIS)

Frenzel, J.; Zhang, Z.; Neuking, K.; Eggeler, G.

2004-01-01

Binary NiTi based shape memory alloys can be produced starting from the pure elements (Ni-pellets, Ti-rods) by using vacuum induction melting (VIM). VIM ingot metallurgy is known to produce materials with a good chemical homogeneity; it, moreover, is cheaper than vacuum arc melting (VAM) when small quantities of laboratory materials are needed. In a VIM procedure, graphite crucibles are attractive because they have appropriate electrical properties. For NiTi melting, graphite crucibles are interesting because they are reasonably priced and they show a good resistance against thermal cracking. On the other hand, it is well known that melting of Ti alloys in graphite crucibles is associated with a vigorous interface reaction. And the carbon concentration of NiTi alloys needs to be kept below a certain minimum in order to assure that the functional properties of the alloys meet the required targets. Therefore, it is important to minimize the carbon pick up of the melt. The present work presents experimental results and discusses thermodynamic and kinetic aspects of the reaction of NiTi melts with graphite crucibles; a method is suggested to keep the carbon dissolution into the melt at a minimum

Melt-processing method for radioactive solid wastes

International Nuclear Information System (INIS)

Kobayashi, Hiroaki

1998-01-01

Radioactive solid wastes are charged into a water-cooled type cold crucible induction melting furnace disposed in high frequency coils, and high frequency currents are supplied to high frequency coils which surround the melting furnace to melt the solid wastes by induction-heating. In this case, heat plasmas are jetted from above the solid wastes to the solid wastes to conduct initial heating to melt a portion of the solid wastes. Then, high frequency currents are supplied to the high frequency coils to conduct induction heating. According to this method, even when waste components of various kinds of materials are mixed, a portion of the solid wastes in the induction melting furnace can be melted by the initial heating by jetting heat plasmas irrespective of the kinds and the electroconductivity of the materials of the solid wastes. With such procedures, entire solid wastes in the furnace can be formed into a molten state uniformly and rapidly. (T.M.)

Skull Radiography

Science.gov (United States)

What you need to know about… Skull Radiography X-ray images of the skull are taken when it is necessary to see the cranium, facial bones or jaw bones. ... Among other things, x-ray exams of the skull can show fractures. Patient Preparation Before the examination, ...

Skull Practice.

Science.gov (United States)

Slesnick, Irwin L.

1988-01-01

Disguises a lesson about skulls with some fun to cause less fear among students. Outlines strategies, questions, and answers for use. Includes a skull mask which can be photocopied and distributed to students as a learning tool and a fun Halloween treat. Also shown is a picture of skull parts. (RT)

Comparative microstructural and corrosion development of VCrNiCoFeCu equiatomic multicomponent alloy produced by induction melting and spark plasma sintering

Science.gov (United States)

Fazakas, É.; Heczel, A.; Molnár, D.; Varga, B.; Zadorozhnyy, V.; Vida, Á.

2018-03-01

The present study focuses on the corrosion behavior of a single-phase FCC high entropy alloy (VCrNiCoFeCu) casted by two different methods: induction melting and spark plasma sintering. The corrosion resistance has been evaluated using immersion tests in 3.5% NaCl solution, the potentiodynamic polarization measurements and the results are compared how is dependent the corrosion rate as a function of the production methods. Our results show that induction melted sample is stable in salty environment. On the other hand, based on the changes of polarization curves, there must be an evolution of oxide films on the SPSed sample until reaching the stable oxide layer.

Skull repair materials applied in cranioplasty: History and progress

Institute of Scientific and Technical Information of China (English)

Qingsheng Yu; Lin Chen; Zhiye Qiu; Yuqi Zhang; Tianxi Song; Fuzhai Cui

2017-01-01

The skull provides protection and mechanical support, and acts as a container for the brain and its accessory organs. Some defects in the skull can fatally threaten human life. Many efforts have been taken to repair defects in the skull, among which cranioplasty is the most prominent technique. To repair the injury, numerous natural and artificial materials have been adopted by neurosurgeons. Many cranioprostheses have been tried in the past decades, from autoplast to bioceramics. Neurosurgeons have been evaluating their advantages andshortages through clinical practice. Among those prostheses, surgeons gradually prefer bionic ones due to their marvelous osteoconductivity, osteoinductivity, biocompatibility,and biodegradability. Autogeneic bone has been widely recognized as the"gold standard" for renovating large-sized bone defects. However, the access to this technique is restricted by limited availability and complications associated with its use. Many metal and polymeric materials with mechanical characteristics analogous to natural bones were consequently applied to cranioplasty. But most of them were unsatisfactory concerning osteoconductiion and biodegradability owe to their intrinsic properties. With the microstructures almost identical to natural bones, mineralized collagen hasbiological performance nearly identical to autogeneic bone, such as osteoconduction. Implants made of mineralized collagen can integrate themselves into the newly formed bones through a process called"creeping substitution". In this review, the authors retrospect the evolution of skull repair material applied in cranioplasty. The ultimate skull repair material should have microstructure and bioactive qualities that enable osteogenesis induction and intramembranous ossification.

Skull base tumours

Energy Technology Data Exchange (ETDEWEB)

Borges, Alexandra [Instituto Portugues de Oncologia Francisco Gentil, Servico de Radiologia, Rua Professor Lima Basto, 1093 Lisboa Codex (Portugal)], E-mail: borgesalexandra@clix.pt

2008-06-15

With the advances of cross-sectional imaging radiologists gained an increasing responsibility in the management of patients with skull base pathology. As this anatomic area is hidden to clinical exam, surgeons and radiation oncologists have to rely on imaging studies to plan the most adequate treatment. To fulfil these endeavour radiologists need to be knowledgeable about skull base anatomy, about the main treatment options available, their indications and contra-indications and needs to be aware of the wide gamut of pathologies seen in this anatomic region. This article will provide a radiologists' friendly approach to the central skull base and will review the most common central skull base tumours and tumours intrinsic to the bony skull base.

Skull base tumours

International Nuclear Information System (INIS)

Borges, Alexandra

2008-01-01

With the advances of cross-sectional imaging radiologists gained an increasing responsibility in the management of patients with skull base pathology. As this anatomic area is hidden to clinical exam, surgeons and radiation oncologists have to rely on imaging studies to plan the most adequate treatment. To fulfil these endeavour radiologists need to be knowledgeable about skull base anatomy, about the main treatment options available, their indications and contra-indications and needs to be aware of the wide gamut of pathologies seen in this anatomic region. This article will provide a radiologists' friendly approach to the central skull base and will review the most common central skull base tumours and tumours intrinsic to the bony skull base

Melting of contaminated metallic waste

International Nuclear Information System (INIS)

Lee, Y.-S.; Cheng, S.-Y.; Kung, H.-T.; Lin, L.-F.

2004-01-01

Approximately 100 tons of contaminated metallic wastes were produced each year due to maintenance for each TPC's nuclear power reactor and it was roughly estimated that there will be 10,000 tons of metallic scraps resulted from decommissioning of each reactor in the future. One means of handling the contaminated metal is to melt it. Melting process owns not only volume reduction which saves the high cost of final disposal but also resource conservation and recycling benefits. Melting contaminated copper and aluminum scraps in the laboratory scale have been conducted at INER. A total of 546 kg copper condenser tubes with a specific activity of about 2.7 Bq/g was melted in a vacuum induction melting facility. Three types of products, ingot, slag and dust were derived from the melting process, with average activities of 0.10 Bq/g, 2.33 Bq/g and 84.3 Bq/g respectively. After the laboratory melting stage, a pilot plant with a 500 kg induction furnace is being designed to melt the increasingly produced contaminated metallic scraps from nuclear facilities and to investigate the behavior of different radionuclides during melting. (author)

FEASIBILITY EVALUATION AND RETROFIT PLAN FOR COLD CRUCIBLE INDUCTION MELTER DEPLOYMENT IN THE DEFENSE WASTE PROCESSING FACILITY AT SAVANNAH RIVER SITE 8118

International Nuclear Information System (INIS)

Barnes, A; Dan Iverson, D; Brannen Adkins, B

2008-01-01

Cold crucible induction melters (CCIM) have been proposed as an alternative technology for waste glass melting at the Defense Waste Processing Facility (DWPF) at Savannah River Site (SRS) as well as for other waste vitrification facilities. Proponents of this technology cite high temperature operation, high tolerance for noble metals and aluminum, high waste loading, high throughput capacity, and low equipment cost as the advantages over existing Joule Heated Melter (JHM) technology. The CCIM uses induction heating to maintain molten glass at high temperature. A water-cooled helical induction coil is connected to an AC current supply, typically operating at frequencies from 100 KHz to 5 MHz. The oscillating magnetic field generated by the oscillating current flow through the coil induces eddy currents in conductive materials within the coil. Those oscillating eddy currents, in turn, generate heat in the material. In the CCIM, the induction coil surrounds a 'Cold Crucible' which is formed by metal tubes, typically copper or stainless steel. The tubes are constructed such that the magnetic field does not couple with the crucible. Therefore, the field generated by the induction coil couples primarily with the conductive medium (hot glass) within. The crucible tubes are water cooled to maintain their temperature between 100 C to 200 C so that a protective layer of molten glass and/or batch material, referred to as a 'skull', forms between them and the hot, corrosive melt. Because the protective skull is the only material directly in contact with the molten glass, the CCIM doesn't have the temperature limitations of traditional refractory lined JHM. It can be operated at melt temperatures in excess of 2000 C, allowing processing of high waste loading batches and difficult-to-melt compounds. The CCIM is poured through a bottom drain, typically through a water-cooled slide valve that starts and stops the pour stream. To promote uniform temperature distribution and

Skull (image)

Science.gov (United States)

The skull is anterior to the spinal column and is the bony structure that encases the brain. Its purpose ... the facial muscles. The two regions of the skull are the cranial and facial region. The cranial ...

Melting method for radioactive solid wastes and device therefor

Energy Technology Data Exchange (ETDEWEB)

Komatsu, Masahiko; Abe, Takashi; Nakayama, Junpei; Kusamichi, Tatsuhiko; Sakamoto, Koichi

1998-11-17

Upon melting radioactive solid wastes mixed with radioactive metal wastes and non metal materials such as concrete by cold crucible high frequency induction heating, induction coils are wound around the outer circumference of a copper crucible having a water cooling structure to which radioactive solid wastes are charged. A heating sleeve formed by a material which generates heat by an induction heating function of graphite is disposed to the inside of the crucible at a height not in contact with molten metals in the crucible vertically movably. Radioactive solid wastes are melted collectively by the induction heat of the induction coils and thermal radiation and heat conduction of the heating sleeve heated by the induction heat. With such procedures, non metal materials such as concrete and radioactive metal wastes in a mixed state can be melt collectively continuously highly economically. (T.M.)

Skull Thickness Morphing for an Age and Sex Specific FE Model of the Skull.

Science.gov (United States)

Jones, Derek A; Urban, Jillian E; Lillie, Elizabeth M; Stitzel, Joel D

2015-01-01

Skull deformation is believed to be a contributing factor in traumatic brain injury (TBI). Furthermore, skull thickness is thought to be an important factor governing deformation of the skull and its susceptibility to fracture. Although many studies have been done to understand the mechanisms of brain injury and skull fracture, the majority of the cadaveric and finite element (FE) modeling efforts are comprised of older males and 50th percentile male skulls, respectively, which do not accurately represent the population as a whole. This study employed a set of skull table thickness regressions defined at homologous landmarks on the skull which were calculated from 123 pre-existing head CT scans (ages 20-100) using a cortical density-based algorithm. A method was developed to morph the Global Human Body Models Consortium (GHBMC) 50th percentile male skull model to age and gender specific geometries based on the full thickness regressions using a Thin Plate Spline algorithm. A quantitative measure of morphing error was devised and measured using the morphed and desired full thickness values at the homologous landmark locations. This methodology can be used to create gender and age-specific FE models of the skull and will ultimately be used to understand the relationship between cortical thickness, skull deformation, and head injury.

Infant skull fracture (image)

Science.gov (United States)

Skull fractures may occur with head injuries. Although the skull is both tough and resilient and provides excellent ... or blow can result in fracture of the skull and may be accompanied by injury to the ...

Processing and characterization of Al–Cu–Li alloy AA2195 undergoing scale up production through the vacuum induction melting technique

Energy Technology Data Exchange (ETDEWEB)

Nayan, Niraj, E-mail: metnayan@gmail.com [Materials and Mechanical Entity, Vikram Sarabhai Space Centre, Trivandrum 695022 (India); Murty, S.V.S. Narayana; Jha, Abhay K.; Pant, Bhanu; Sharma, S.C.; George, Koshy M. [Materials and Mechanical Entity, Vikram Sarabhai Space Centre, Trivandrum 695022 (India); Sastry, G.V.S. [Department of Metallurgical Engineering, Institute of Technology, Banaras Hindu University, Varanasi (India)

2013-08-01

The inherent properties of lithium, such as high reactivity and toxicity, relatively low density, low melting point, along with its high cost requires a special technological approach to cast Al–Cu–Li alloy AA2195 as compared to the conventional Direct Chill (DC) casting of aluminum alloys. This paper describes the processing requirements for melting and casting of 200 kg of Al–Cu–Li alloy in a Vacuum Induction Melting (VIM) furnace under dynamic inert atmosphere. The as-cast billets have been homogenized to remove microsegregation as well as to avoid incipient melting, and subsequently subjected for secondary metal processing operations viz., forging and rolling. The product in the form of 4 mm thick sheets was subjected to various heat treatments in T8 (Solution Treatment+WQ+CW+Aging) condition. Mechanical properties were evaluated at room temperature and were correlated with microstructures of the sheets processed under different conditions using transmission electron microscopy (TEM)

Processing and characterization of Al–Cu–Li alloy AA2195 undergoing scale up production through the vacuum induction melting technique

International Nuclear Information System (INIS)

Nayan, Niraj; Murty, S.V.S. Narayana; Jha, Abhay K.; Pant, Bhanu; Sharma, S.C.; George, Koshy M.; Sastry, G.V.S.

2013-01-01

The inherent properties of lithium, such as high reactivity and toxicity, relatively low density, low melting point, along with its high cost requires a special technological approach to cast Al–Cu–Li alloy AA2195 as compared to the conventional Direct Chill (DC) casting of aluminum alloys. This paper describes the processing requirements for melting and casting of 200 kg of Al–Cu–Li alloy in a Vacuum Induction Melting (VIM) furnace under dynamic inert atmosphere. The as-cast billets have been homogenized to remove microsegregation as well as to avoid incipient melting, and subsequently subjected for secondary metal processing operations viz., forging and rolling. The product in the form of 4 mm thick sheets was subjected to various heat treatments in T8 (Solution Treatment+WQ+CW+Aging) condition. Mechanical properties were evaluated at room temperature and were correlated with microstructures of the sheets processed under different conditions using transmission electron microscopy (TEM)

Micrometeorite Impacts in Beringian Mammoth Tusks and a Bison Skull

Energy Technology Data Exchange (ETDEWEB)

Hagstrum, Jonathon T.; Firestone, Richard B; West, Allen; Stefanka, Zsolt; Revay, Zsolt

2010-02-03

We have discovered what appear to be micrometeorites imbedded in seven late Pleistocene Alaskan mammoth tusks and a Siberian bison skull. The micrometeorites apparently shattered on impact leaving 2 to 5 mm hemispherical debris patterns surrounded by carbonized rings. Multiple impacts are observed on only one side of the tusks and skull consistent with the micrometeorites having come from a single direction. The impact sites are strongly magnetic indicating significant iron content. We analyzed several imbedded micrometeorite fragments from both tusks and skull with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and X-ray fluorescence (XRF). These analyses confirm the high iron content and indicate compositions highly enriched in nickel and depleted in titanium, unlike any natural terrestrial sources. In addition, electron microprobe (EMP) analyses of a Fe-Ni sulfide grain (tusk 2) show it contains between 3 and 20 weight percent Ni. Prompt gamma-ray activation analysis (PGAA) of a particle extracted from the bison skull indicates ~;;0.4 mg of iron, in agreement with a micrometeorite ~;;1 mm in diameter. In addition, scanning electron microscope (SEM) images and XRF analyses of the skull show possible entry channels containing Fe-rich material. The majority of tusks (5/7) have a calibrated weighted mean 14C age of 32.9 +- 1.8 ka BP, which coincides with the onset of significant declines<36 ka ago in Beringian bison, horse, brown bear, and mammoth populations, as well as in mammoth genetic diversity. It appears likely that the impacts and population declines are related events, although their precise nature remains to be determined.

Promising technology for the melting and decontamination of dismantled metal by an induction cold crucible

International Nuclear Information System (INIS)

Suzuki, M.; Tsurumaki, K.; Akiyama, T.; Fukumura, N.; Tanaka, T.; Yoshida, M.; Ikenaga, Y.

1998-01-01

An induction cold crucible melting is one of the most promising technology for the reuse and decontamination of the radioactively contaminated metallic materials generated during the dismantling of nuclear facilities, because the crucible ensures a long life operation without generating the secondary wastes. Based on the knowledge obtained through the fundamental study using the crucible of 45 mm in diameter, the MERC(Melting and Recycling of Metals by -Cold Crucible) process was designed, manufactured and scaled up to 100-140 mm in diameter. Not only cylindrical sectional crucibles but also rectangular slab sectional crucibles were developed. The maximum power of the high frequency generator is 150 kW and the frequency is 25 kHz. In the MERC, either fragments of stainless steel or tubing and pipings with small section, which were the surrogates of contaminated metallic materials, were continuously supplied together with the flux for the decontamination, followed by melting in the crucible and pulling down by the precise withdrawal system ensuring the melt dome to be kept at a suitable level for the melting. The maximal withdrawal velocity employed was 12 mm/min. The Ingot and slab were cut in every 300 mm length by the mechanical saw. They were automatically transported to the outlet of the equipment by the conveying system. Heat efficiency of the MERC was more than 26%. The ingot surface was smooth and crack free, facilitating the removal of radioactive elements concentrated in a slag stuck on the ingot surface. There was no macro segregation inside. Tracer elements of Sr and Hf transferred to the slag, Cs and Zn to the dust. Co and Mn mostly remained in the ingot. However, up to 10% of Co could transfer to the slag. This work was done under the sponsorship of Science and Technology Agency of Japan. (author)

Skull base tumours part I: Imaging technique, anatomy and anterior skull base tumours

Energy Technology Data Exchange (ETDEWEB)

Borges, Alexandra [Instituto Portugues de Oncologia Francisco Gentil, Centro de Lisboa, Servico de Radiologia, Rua Professor Lima Basto, 1093 Lisboa Codex (Portugal)], E-mail: borgesalexandra@clix.pt

2008-06-15

Advances in cross-sectional imaging, surgical technique and adjuvant treatment have largely contributed to ameliorate the prognosis, lessen the morbidity and mortality of patients with skull base tumours and to the growing medical investment in the management of these patients. Because clinical assessment of the skull base is limited, cross-sectional imaging became indispensable in the diagnosis, treatment planning and follow-up of patients with suspected skull base pathology and the radiologist is increasingly responsible for the fate of these patients. This review will focus on the advances in imaging technique; contribution to patient's management and on the imaging features of the most common tumours affecting the anterior skull base. Emphasis is given to a systematic approach to skull base pathology based upon an anatomic division taking into account the major tissue constituents in each skull base compartment. The most relevant information that should be conveyed to surgeons and radiation oncologists involved in patient's management will be discussed.

Skull base tumours part I: Imaging technique, anatomy and anterior skull base tumours

International Nuclear Information System (INIS)

Borges, Alexandra

2008-01-01

Advances in cross-sectional imaging, surgical technique and adjuvant treatment have largely contributed to ameliorate the prognosis, lessen the morbidity and mortality of patients with skull base tumours and to the growing medical investment in the management of these patients. Because clinical assessment of the skull base is limited, cross-sectional imaging became indispensable in the diagnosis, treatment planning and follow-up of patients with suspected skull base pathology and the radiologist is increasingly responsible for the fate of these patients. This review will focus on the advances in imaging technique; contribution to patient's management and on the imaging features of the most common tumours affecting the anterior skull base. Emphasis is given to a systematic approach to skull base pathology based upon an anatomic division taking into account the major tissue constituents in each skull base compartment. The most relevant information that should be conveyed to surgeons and radiation oncologists involved in patient's management will be discussed

Imaging in tuberculosis of the skull and skull-base: case report

International Nuclear Information System (INIS)

Sencer, S.; Aydin, K.; Poyanli, A.; Minareci, O.; Sencer, A.; Hepguel, K.

2003-01-01

We report a 19-year-old girl, who presented with headache and tonic/clonic seizures. Imaging revealed a lytic parietal skull lesion with an adjacent epidural mass, masses in the right parietal lobe and a posterior skull-base mass. The diagnosis of tuberculosis was made after resection of the extradural mass and later verified with culture of Mycobacterium tuberculosis. The parenchymal and skull-base lesions resolved following antituberculous treatment. We present CT, scintigraphic, angiographic and MRI findings. (orig.)

Skull x-ray

Science.gov (United States)

X-ray - head; X-ray - skull; Skull radiography; Head x-ray ... There is low radiation exposure. X-rays are monitored and regulated to provide the minimum amount of radiation exposure needed to produce the image. Most ...

Skull anatomy (image)

Science.gov (United States)

The skull is anterior to the spinal column and is the bony structure that encases the brain. Its purpose ... the facial muscles. The two regions of the skull are the cranial and facial region. The cranial ...

Chemically durable iron phosphate glasses for vitrifying sodium bearing waste (SBW) using conventional and cold crucible induction melting (CCIM) techniques

Energy Technology Data Exchange (ETDEWEB)

Kim, C.W. E-mail: cheol@umr.edu; Ray, C.S.; Zhu, D.; Day, D.E.; Gombert, D.; Aloy, A.; Mogus-Milankovic, A.; Karabulut, M

2003-11-01

A simulated sodium bearing waste (SBW) was successfully vitrified in iron phosphate glasses (IPG) at a maximum waste loading of 40 wt% using conventional and cold crucible induction melting (CCIM) techniques. No sulfate segregation or crystalline phases were detectable in the IPG when examined by SEM and XRD. The IPG wasteforms containing 40 wt% SBW satisfy current DOE requirements for aqueous chemical durability as evaluated from their bulk dissolution rate (D{sub R}), product consistency test, and vapor hydration test. The fluid IPG wasteforms can be melted at a relatively low temperature (1000 deg. C) and for short times (<6 h). These properties combined with a significantly higher waste loading, and the feasibility of CCIM melting offer considerable savings in time, energy, and cost for vitrifying the SBW stored at the Idaho National Engineering and Environmental Laboratory in iron phosphate glasses.

The induction furnace as a melting facility in steel production. Pt. 1. Features of induction furnaces used in steel production; Der Induktionsofen als Schmelzaggregat fuer die Stahlerzeugung. T. 1. Merkmale von Induktionsoefen in der Stahlerzeugung

Energy Technology Data Exchange (ETDEWEB)

Chaabet, Mohamed; Doetsch, Erwin [ABP Induction Systems GmbH, Dortmund (Germany)

2011-12-15

Global steel output has now been growing extremely rapidly for a prolonged time; in the past ten years alone, annual production has risen from 851 million t/a (in 2001) to 1417 million t/a (2010), as a result, primarily, of growth in China. Electric steel production using the electric arc furnace as the classical melting facility is around 45 % world-wide, with a rising trend (but excluding the special case of China, where oxygen-route steel holds a 90 % share of production). Following the development of induction technology and inverter outputs of over 40 MW for crucible furnaces with capacities of above 65 t, the induction furnace is now available as an alternative electrical melting installation for use in smaller mini steel mills. The benefits of this technology can be found in high feed-material efficiencies and low environmental and workplace burdens, in addition to the absence of electrode costs and the only modest demands made on the power-supply grid. These features of the induction furnace and their special significance for steel production are examined in Part 1 of this article. The second part of the article then focuses on examples of the use of induction furnaces in the steelmaking plant. (orig.)

Development of high-frequency induction melting system for radioactive solid wastes

International Nuclear Information System (INIS)

Kawaguchi, Ichiro; Yamazaki, Seichiro; Takahashi, Noriaki; Kugai, Katsutoshi; Yokozawa, Minoru

2004-01-01

Kawasaki Heavy Industries, Ltd. developed an active insulation (AI) method radiofrequency melting system as a new melting treatment system of radioactive solid wastes and proved production of waste satisfied the treatment performances and burying by repeating many practical melting tests. The melting vessel uses a low-priced ceramic canister with nonelectrical conductivity, which is able to treat wastes with large amount of inorganic substances. The wastes melted in the canister is taken out the canister itself from radiofrequency melting reactor and solidified after cooling. The cool canister is stored in 2001 metal drum filling up a gap with mortal for laying underground. New radiofrequency melting reactor, 1/3 scale melting test, estimation of scale effects, melting tests for practical use and the total system are explained. (S.Y.)

Diseases of the skull

International Nuclear Information System (INIS)

Koval', G.Yu.

1984-01-01

Different forms of skull diseases viz. inflammatory diseases, skull tumors, primary and secondary bone tumors, are considered. Roentgenograms in some above-mentioned diseases are presented and analysed

Effect of electric arc, gas oxygen torch and induction melting techniques on the marginal accuracy of cast base-metal and noble metal-ceramic crowns.

Science.gov (United States)

Gómez-Cogolludo, Pablo; Castillo-Oyagüe, Raquel; Lynch, Christopher D; Suárez-García, María-Jesús

2013-09-01

The aim of this study was to identify the most appropriate alloy composition and melting technique by evaluating the marginal accuracy of cast metal-ceramic crowns. Seventy standardised stainless-steel abutments were prepared to receive metal-ceramic crowns and were randomly divided into four alloy groups: Group 1: palladium-gold (Pd-Au), Group 2: nickel-chromium-titanium (Ni-Cr-Ti), Group 3: nickel-chromium (Ni-Cr) and Group 4: titanium (Ti). Groups 1, 2 and 3 were in turn subdivided to be melted and cast using: (a) gas oxygen torch and centrifugal casting machine (TC) or (b) induction and centrifugal casting machine (IC). Group 4 was melted and cast using electric arc and vacuum/pressure machine (EV). All of the metal-ceramic crowns were luted with glass-ionomer cement. The marginal fit was measured under an optical microscope before and after cementation using image analysis software. All data was subjected to two-way analysis of variance (ANOVA). Duncan's multiple range test was run for post-hoc comparisons. The Student's t-test was used to investigate the influence of cementation (α=0.05). Uncemented Pd-Au/TC samples achieved the best marginal adaptation, while the worst fit corresponded to the luted Ti/EV crowns. Pd-Au/TC, Ni-Cr and Ti restorations demonstrated significantly increased misfit after cementation. The Ni-Cr-Ti alloy was the most predictable in terms of differences in misfit when either torch or induction was applied before or after cementation. Cemented titanium crowns exceeded the clinically acceptable limit of 120μm. The combination of alloy composition, melting technique, casting method and luting process influences the vertical seal of cast metal-ceramic crowns. An accurate use of the gas oxygen torch may overcome the results attained with the induction system concerning the marginal adaptation of fixed dental prostheses. Copyright © 2013 Elsevier Ltd. All rights reserved.

Functional relationship between skull form and feeding mechanics in Sphenodon, and implications for diapsid skull development.

Directory of Open Access Journals (Sweden)

Neil Curtis

Full Text Available The vertebrate skull evolved to protect the brain and sense organs, but with the appearance of jaws and associated forces there was a remarkable structural diversification. This suggests that the evolution of skull form may be linked to these forces, but an important area of debate is whether bone in the skull is minimised with respect to these forces, or whether skulls are mechanically "over-designed" and constrained by phylogeny and development. Mechanical analysis of diapsid reptile skulls could shed light on this longstanding debate. Compared to those of mammals, the skulls of many extant and extinct diapsids comprise an open framework of fenestrae (window-like openings separated by bony struts (e.g., lizards, tuatara, dinosaurs and crocodiles, a cranial form thought to be strongly linked to feeding forces. We investigated this link by utilising the powerful engineering approach of multibody dynamics analysis to predict the physiological forces acting on the skull of the diapsid reptile Sphenodon. We then ran a series of structural finite element analyses to assess the correlation between bone strain and skull form. With comprehensive loading we found that the distribution of peak von Mises strains was particularly uniform throughout the skull, although specific regions were dominated by tensile strains while others were dominated by compressive strains. Our analyses suggest that the frame-like skulls of diapsid reptiles are probably optimally formed (mechanically ideal: sufficient strength with the minimal amount of bone with respect to functional forces; they are efficient in terms of having minimal bone volume, minimal weight, and also minimal energy demands in maintenance.

Functional Relationship between Skull Form and Feeding Mechanics in Sphenodon, and Implications for Diapsid Skull Development

Science.gov (United States)

Curtis, Neil; Jones, Marc E. H.; Shi, Junfen; O'Higgins, Paul; Evans, Susan E.; Fagan, Michael J.

2011-01-01

The vertebrate skull evolved to protect the brain and sense organs, but with the appearance of jaws and associated forces there was a remarkable structural diversification. This suggests that the evolution of skull form may be linked to these forces, but an important area of debate is whether bone in the skull is minimised with respect to these forces, or whether skulls are mechanically “over-designed” and constrained by phylogeny and development. Mechanical analysis of diapsid reptile skulls could shed light on this longstanding debate. Compared to those of mammals, the skulls of many extant and extinct diapsids comprise an open framework of fenestrae (window-like openings) separated by bony struts (e.g., lizards, tuatara, dinosaurs and crocodiles), a cranial form thought to be strongly linked to feeding forces. We investigated this link by utilising the powerful engineering approach of multibody dynamics analysis to predict the physiological forces acting on the skull of the diapsid reptile Sphenodon. We then ran a series of structural finite element analyses to assess the correlation between bone strain and skull form. With comprehensive loading we found that the distribution of peak von Mises strains was particularly uniform throughout the skull, although specific regions were dominated by tensile strains while others were dominated by compressive strains. Our analyses suggest that the frame-like skulls of diapsid reptiles are probably optimally formed (mechanically ideal: sufficient strength with the minimal amount of bone) with respect to functional forces; they are efficient in terms of having minimal bone volume, minimal weight, and also minimal energy demands in maintenance. PMID:22216358

Observation of skull-guided acoustic waves in a water-immersed murine skull using optoacoustic excitation

Science.gov (United States)

Estrada, Héctor; Rebling, Johannes; Razansky, Daniel

2017-02-01

The skull bone, a curved solid multilayered plate protecting the brain, constitutes a big challenge for the use of ultrasound-mediated techniques in neuroscience. Ultrasound waves incident from water or soft biological tissue are mostly reflected when impinging on the skull. To this end, skull properties have been characterized for both high-intensity focused ultrasound (HIFU) operating in the narrowband far-field regime and optoacoustic imaging applications. Yet, no study has been conducted to characterize the near-field of water immersed skulls. We used the thermoelastic effect with a 532 nm pulsed laser to trigger a wide range of broad-band ultrasound modes in a mouse skull. In order to capture the waves propagating in the near-field, a thin hydrophone was scanned in close proximity to the skull's surface. While Leaky pseudo-Lamb waves and grazing-angle bulk water waves are clearly visible in the spatio-temporal data, we were only able to identify skull-guided acoustic waves after dispersion analysis in the wavenumber-frequency space. The experimental data was found to be in a reasonable agreement with a flat multilayered plate model.

21 CFR 882.4750 - Skull punch.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Skull punch. 882.4750 Section 882.4750 Food and... NEUROLOGICAL DEVICES Neurological Surgical Devices § 882.4750 Skull punch. (a) Identification. A skull punch is a device used to punch holes through a patient's skull to allow fixation of cranioplasty plates or...

Cranioplasty Enhanced by Three-Dimensional Printing: Custom-Made Three-Dimensional-Printed Titanium Implants for Skull Defects.

Science.gov (United States)

Park, Eun-Kyung; Lim, Jun-Young; Yun, In-Sik; Kim, Ju-Seong; Woo, Su-Heon; Kim, Dong-Seok; Shim, Kyu-Won

2016-06-01

The authors studied to demonstrate the efficacy of custom-made three-dimensional (3D)-printed titanium implants for reconstructing skull defects. From 2013 to 2015, 21 patients (8-62 years old, mean = 28.6-year old; 11 females and 10 males) with skull defects were treated. Total disease duration ranged from 6 to 168 months (mean = 33.6 months). The size of skull defects ranged from 84 × 104 to 154 × 193 mm. Custom-made implants were manufactured by Medyssey Co, Ltd (Jecheon, South Korea) using 3D computed tomography data, Mimics software, and an electron beam melting machine. The team reviewed several different designs and simulated surgery using a 3D skull model. During the operation, the implant was fit to the defect without dead space. Operation times ranged from 85 to 180 minutes (mean = 115.7 minutes). Operative sites healed without any complications except for 1 patient who had red swelling with exudation at the skin defect, which was a skin infection and defect at the center of the scalp flap reoccurring since the initial head injury. This patient underwent reoperation for skin defect revision and replacement of the implant. Twenty-one patients were followed for 6 to 24 months (mean = 14.1 months). The patients were satisfied and had no recurrent wound problems. Head computed tomography after operation showed good fixation of titanium implants and satisfactory skull-shape symmetry. For the reconstruction of skull defects, the use of autologous bone grafts has been the treatment of choice. However, bone use depends on availability, defect size, and donor morbidity. As 3D printing techniques are further advanced, it is becoming possible to manufacture custom-made 3D titanium implants for skull reconstruction.

The skull in renal osteodystrophy

International Nuclear Information System (INIS)

Orzincolo, C.; Tamarozzi, R.; Bedani, P.L.

1987-01-01

Skull X-ray of 60 patients with chronic renal failure were examined. Alterations included diminished or increased bone density, radiolucent areas, pepper pot skull and the disappearance of vascular grooves and sutures. It is suggested that the radiological aspect of the skull is of very little diagnostic use in the assessment of uremic osteopathy since specific alterations are rare and tardive and show no correlation with clinical and laboratory findings. Skull X-ray can be usefull in assessing the effects of treatment (vitamin D derivaties, parathyroidectomy) and for the identification of focal lesions (brown tumors)

Imaging of skull base: Pictorial essay

International Nuclear Information System (INIS)

Raut, Abhijit A; Naphade, Prashant S; Chawla, Ashish

2012-01-01

The skull base anatomy is complex. Numerous vital neurovascular structures pass through multiple channels and foramina located in the base skull. With the advent of computerized tomography (CT) and magnetic resonance imaging (MRI), accurate preoperative lesion localization and evaluation of its relationship with adjacent neurovascular structures is possible. It is imperative that the radiologist and skull base surgeons are familiar with this complex anatomy for localizing the skull base lesion, reaching appropriate differential diagnosis, and deciding the optimal surgical approach. CT and MRI are complementary to each other and are often used together for the demonstration of the full disease extent. This article focuses on the radiological anatomy of the skull base and discusses few of the common pathologies affecting the skull base

Does hearing in response to soft-tissue stimulation involve skull vibrations? A within-subject comparison between skull vibration magnitudes and hearing thresholds.

Science.gov (United States)

Chordekar, Shai; Perez, Ronen; Adelman, Cahtia; Sohmer, Haim; Kishon-Rabin, Liat

2018-04-03

Hearing can be elicited in response to bone as well as soft-tissue stimulation. However, the underlying mechanism of soft-tissue stimulation is under debate. It has been hypothesized that if skull vibrations were the underlying mechanism of hearing in response to soft-tissue stimulation, then skull vibrations would be associated with hearing thresholds. However, if skull vibrations were not associated with hearing thresholds, an alternative mechanism is involved. In the present study, both skull vibrations and hearing thresholds were assessed in the same participants in response to bone (mastoid) and soft-tissue (neck) stimulation. The experimental group included five hearing-impaired adults in whom a bone-anchored hearing aid was implanted due to conductive or mixed hearing loss. Because the implant is exposed above the skin and has become an integral part of the temporal bone, vibration of the implant represented skull vibrations. To ensure that middle-ear pathologies of the experimental group did not affect overall results, hearing thresholds were also obtained in 10 participants with normal hearing in response to stimulation at the same sites. We found that the magnitude of the bone vibrations initiated by the stimulation at the two sites (neck and mastoid) detected by the laser Doppler vibrometer on the bone-anchored implant were linearly related to stimulus intensity. It was therefore possible to extrapolate the vibration magnitudes at low-intensity stimulation, where poor signal-to-noise ratio limited actual recordings. It was found that the vibration magnitude differences (between soft-tissue and bone stimulation) were not different than the hearing threshold differences at the tested frequencies. Results of the present study suggest that bone vibration magnitude differences can adequately explain hearing threshold differences and are likely to be responsible for the hearing sensation. Thus, the present results support the idea that bone and soft

Melt cooling by bottom flooding: The experiment CometPC-H3. Ex-vessel core melt stabilization research

International Nuclear Information System (INIS)

Alsmeyer, H.; Cron, T.; Merkel, G.; Schmidt-Stiefel, S.; Tromm, W.; Wenz, T.

2003-03-01

The CometPC-H3 experiment was performed to investigate melt cooling by water addition to the bottom of the melt. The experiment was performed with a melt mass of 800 kg, 50% metal and 50% oxide, and 300 kW typical decay heat were simulated in the melt. As this was the first experiment after repair of the induction coil, attention was given to avoid overload of the induction coil and to keep the inductor voltage below critical values. Therefore, the height of the sacrificial concrete layer was reduced to 5 cm only, and the height of the porous concrete layers was also minimized to have a small distance and good coupling between heated melt and induction coil. After quite homogeneous erosion of the upper sacrificial concrete layer, passive bottom flooding started from the porous concrete after 220 s with 1.3 liter water/s. The melt was safely stopped, arrested and cooled. The porous, water filled concrete was only slightly attacked by the hot melt in the upper 25 mm of one sector of the coolant device. The peak cooling rate in the early contact phase of coolant water and melt was 4 MW/m 2 , and exceeded the decay heat by one order of magnitude. The cooling rate remarkably dropped, when the melt was covered by the penetrating water and a surface crust was formed. Volcanic eruptions from the melt during the solidification process were observed from 360 - 510 s and created a volcanic dome some 25 cm high, but had only minor effect on the generation of a porous structure, as the expelled melt solidified mostly with low porosity. Unfortunately, decay heat simulation in the melt was interrupted at 720 s by an incorrect safety signal, which excluded further investigation of the long term cooling processes. At that time, the melt was massively flooded by a layer of water, about 80 cm thick, and coolant water inflow was still 1 l/s. The melt had reached a stable situation: Downward erosion was stopped by the cooling process from the water filled, porous concrete layer. Top

Effect of inter-tissue inductive coupling on multi-frequency imaging of intracranial hemorrhage by magnetic induction tomography

Science.gov (United States)

Xiao, Zhili; Tan, Chao; Dong, Feng

2017-08-01

Magnetic induction tomography (MIT) is a promising technique for continuous monitoring of intracranial hemorrhage due to its contactless nature, low cost and capacity to penetrate the high-resistivity skull. The inter-tissue inductive coupling increases with frequency, which may lead to errors in multi-frequency imaging at high frequency. The effect of inter-tissue inductive coupling was investigated to improve the multi-frequency imaging of hemorrhage. An analytical model of inter-tissue inductive coupling based on the equivalent circuit was established. A set of new multi-frequency decomposition equations separating the phase shift of hemorrhage from other brain tissues was derived by employing the coupling information to improve the multi-frequency imaging of intracranial hemorrhage. The decomposition error and imaging error are both decreased after considering the inter-tissue inductive coupling information. The study reveals that the introduction of inter-tissue inductive coupling can reduce the errors of multi-frequency imaging, promoting the development of intracranial hemorrhage monitoring by multi-frequency MIT.

21 CFR 882.4030 - Skull plate anvil.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Skull plate anvil. 882.4030 Section 882.4030 Food... DEVICES NEUROLOGICAL DEVICES Neurological Surgical Devices § 882.4030 Skull plate anvil. (a) Identification. A skull plate anvil is a device used to form alterable skull plates in the proper shape to fit...

The contribution of high-resolution multiplanar reformats of the skull base to the detection of skull-base fractures

International Nuclear Information System (INIS)

Connor, S.E.J.; Flis, C.

2005-01-01

AIM: To investigate the contribution of routine review of submillimetric multiplanar reformats to the diagnosis of skull-base fractures. METHODS: A prospective analysis was performed of 407 cases referred over a 6-month period for CT of the skull following cranial trauma. The reformatted 5-mm axial sections and subsequently the high-resolution multiplanar reformats (HRMPRs) were viewed on an ADW 4.1 workstation using bone windows and algorithm. All skull-base fractures and related features, recorded by the consensus of two radiologists, were classified as anatomically significant or non-significant on the basis of eight criteria. The clinical features of skull-base injury and any subsequent treatment were noted in all cases of skull-base fracture. RESULTS: HRMPRs detected 80 separate skull-base fractures in 36/407 cases. Of these 80 fractures, 57 were visible on 5-mm axial sections. In 8 of the 36 cases, the significant anatomical features were only evident on review of the HRMPRs. In 6 of the 36 cases, none of the skull-base fractures was visible on 5-mm sections, but these individuals had only minor associated clinical features and no therapeutic requirements. Review of HRMPRs could have been confined to patients with skull-base fractures, abnormal intracranial and extracranial air collections or opacified mastoid air cells revealed by 5-mm axial sections. This policy would have led to the detection of 79/80 (99%) of skull-base fractures and all significant anatomical features. CONCLUSION: The 5-mm axial sections demonstrated 71% of skull-base fractures and 78% of skull-base fractures with significant anatomical features, using HRMPRs as a gold standard. There were no significant clinical sequelae at short-term follow-up of those fractures only evident on HRMPRs

Magnetoencephalography signals are influenced by skull defects.

Science.gov (United States)

Lau, S; Flemming, L; Haueisen, J

2014-08-01

Magnetoencephalography (MEG) signals had previously been hypothesized to have negligible sensitivity to skull defects. The objective is to experimentally investigate the influence of conducting skull defects on MEG and EEG signals. A miniaturized electric dipole was implanted in vivo into rabbit brains. Simultaneous recording using 64-channel EEG and 16-channel MEG was conducted, first above the intact skull and then above a skull defect. Skull defects were filled with agar gels, which had been formulated to have tissue-like homogeneous conductivities. The dipole was moved beneath the skull defects, and measurements were taken at regularly spaced points. The EEG signal amplitude increased 2-10 times, whereas the MEG signal amplitude reduced by as much as 20%. The EEG signal amplitude deviated more when the source was under the edge of the defect, whereas the MEG signal amplitude deviated more when the source was central under the defect. The change in MEG field-map topography (relative difference measure, RDM(∗)=0.15) was geometrically related to the skull defect edge. MEG and EEG signals can be substantially affected by skull defects. MEG source modeling requires realistic volume conductor head models that incorporate skull defects. Copyright © 2013 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

CT atlas of the skull base

International Nuclear Information System (INIS)

Inoue, Hiroshi; Kawafuchi, Jun-ichi; Takahashi, Kazukuni

1980-01-01

Although CT is generally used for lesions of the face, the orbit, the nasal and paranasal cavity, and the skull base, a CT atlas of these regions has not been reported. Furthermore, the skull base, that lies nearly tangential to the conventional axial plane of CT, can not be precisely evaluated on ordinary horizontal pictures. For the purpose of a clear demonstration of the skull-base structures by CT, a model human skull was investigated. The results and its clinical value have previously been reported. For the CT atlas of the skull base, three model human skulls (embedded in agar gel containing iodine in a manner previously reported) were also examined by EMI-CT1010 with a 5 mm thickness. The magnification and wide-window techniques were also used for demonstration. Ordinary-0 sections (scanning plane at 0 0 to Reid's base line), ordinary-25 sections (+25 0 to RBL), reverse-20 sections (-20 0 to RBL), reverse-80 sections (-80 0 to RBL; coronal sections), and sagittal sections were selected in order to illustrate the anatomical details of the skull base. Pictures of the inner aspect and the outer aspect of the skull base were also provided. Clinically it is very important to recognize osseous change and the relationship between the lesion and the skull base in three dimensions. In evaluating lesions of the skull base and those of the tentorial notch a two-plane CT examination (ordinary-25 sections and reverse-20 sections) is usually used. This method is useful in determining the surgical approach, for instance, to decide between a transsphenoidal approach or intracranial approach for a sellar lesion, or between a subtemporal approach, posterior fossa approach, or combined approach for a lesion of the tentorial notch. It is also helpful to make a map of the lesin on a plain craniogram using this two-plane method in some cases for radiotherapy and stereotactic brain biopsy. (author)

CT findings in patient with skull fractures

Energy Technology Data Exchange (ETDEWEB)

Jo, Han Gi; Suh, Won Hyuck [Korea University College of Medicine, Seoul (Korea, Republic of)

1988-12-15

CT scan has been inevitable method for patient with head trauma. CT scans of 94 cases, which were confirmed skull fracture by plain film, were reviewed for better and useful dealing of CT. The results were as follows: 1. Car accident was the most frequent cause of head injury. 2. No evidence of intracranial abnormality in CT scan of skull fractures on plane film was 45.7%, and alert mentality was 46.8% of skull fracture on skull fracture on simple film. 3. Detection rate on CT scan to skull fractures was 27.7%, but detection rate to depression fractures of skull fracture was 70.2%. 4. Mortality rate of patients with skull fracture was 10.6%. 5. Associated CT findings were pneumocephalus on CT scan 3.2%, contusion of edema 4.2%, epidural hematoma 16.0%, subdural hematoma 17.0%, subdural hygroma 2.1%, intracerebral hemorrhage 4.9%, and subarachnoid hemorrhage 2.0%.

Fission Product Release from Molten Pool: ceramic melt tests

Energy Technology Data Exchange (ETDEWEB)

Petrov, Yu.B.; Lopukh, D.B.; Petchenkov, A.Yu. [AO ' NP Sintez' , St. Petersburg (RU)] [and others

1999-07-01

Experimental results are presented on the volatilisation of UO{sub 2{+-}}{sub x}, SrO, BaO, CeO{sub 2} from corium melts. Corium melts were generated by high frequency induction melting in a cold crucible. The surface temperature of the melts was in the range from 1753 to 3023 K. Some results of the tests are discussed and a comparison with published data is made. (author)

Microstructure and magnetism of Co2FeAl Heusler alloy prepared by arc and induction melting compared with planar flow casting

Science.gov (United States)

Titov, A.; Jiraskova, Y.; Zivotsky, O.; Bursik, J.; Janickovic, D.

2018-04-01

This paper is devoted to investigations of the structural and magnetic properties of the Co2FeAl Heusler alloy produced by three technologies. The alloys prepared by arc and induction melting have resulted in coarse-grained samples in contrast to the fine-grained ribbon-type sample prepared by planar flow casting. Scanning electron microscopy completed by energy dispersive X-ray spectroscopy, X-ray diffraction, Mössbauer spectroscopy, and magnetic methods sensitive to both bulk and surface were applied. The chemical composition was slightly different from the nominal only for the ribbon sample. From the viewpoint of magnetic properties, the bulk coercivity and remnant magnetization have followed the structure influenced by the technology used. Saturation magnetization was practically the same for samples prepared by arc and induction melting, whereas the magnetization of ribbon is slightly lower due to a higher Al content at the expense of iron and cobalt. The surface magnetic properties were markedly influenced by anisotropy, grain size, and surface roughness of the samples. The surface roughness and brittleness of the ribbon-type sample did not make domain structure observation possible. The other two samples could be well polished and their highly smooth surface has enabled domain structure visualization by both magneto-optical Kerr microscopy and magnetic force microscopy.

Numerical study of particle filtration in an induction crucible furnace

International Nuclear Information System (INIS)

Asad, Amjad; Kratzsch, Christoph; Dudczig, Steffen; Aneziris, Christos G.; Schwarze, Rüdiger

2016-01-01

Highlights: • Removing particles from a melt in an induction furnace by using a filter is introduced. • The effect of filter and its permeability on the melt flow is shown. • The impact of filter permeability and particle diameter on filter efficiency is studied. • The filter efficiency depends on filter position and number of the used filter. - Abstract: The present paper deals with a numerical investigation of the turbulent melt flow driven by the electromagnetic force in an induction furnace. The main scope of the paper is to present a new principle to remove non-metallic particles from steel melt in an induction furnace by immersing a porous filter in the melt. The magnetic field acting on the melt is calculated by using the open source software MaxFEM"®, while the turbulent flow is simulated by means of the open source computational fluid dynamics library OpenFOAM"®. The validation of the numerical model is accomplished by using experimental results for the flow without the immersed filter. Here it is shown that the time-averaged flow, obtained numerically is in a good quantitive agreement with the experimental data. Then, the validated numerical model is employed to simulate the melt flow with the immersed filter in the induction furnace of a new type of real steel casting simulator investigated at Technische Universität Bergakademie Freiberg. The considerable effect of the filter on the flow pattern is indicated in the present work. Moreover, it is shown that the filter permeability and its position have a significant influence on the melt flow in the induction furnace. Additionally, particles are injected in the flow domain and tracked by using Lagrangian framework. In this case, the efficiency of the used filter is determined in the present investigation depending on its permeability, its position and the particles diameter.

If the skull fits: magnetic resonance imaging and microcomputed tomography for combined analysis of brain and skull phenotypes in the mouse

Science.gov (United States)

Blank, Marissa C.; Roman, Brian B.; Henkelman, R. Mark; Millen, Kathleen J.

2012-01-01

The mammalian brain and skull develop concurrently in a coordinated manner, consistently producing a brain and skull that fit tightly together. It is common that abnormalities in one are associated with related abnormalities in the other. However, this is not always the case. A complete characterization of the relationship between brain and skull phenotypes is necessary to understand the mechanisms that cause them to be coordinated or divergent and to provide perspective on the potential diagnostic or prognostic significance of brain and skull phenotypes. We demonstrate the combined use of magnetic resonance imaging and microcomputed tomography for analysis of brain and skull phenotypes in the mouse. Co-registration of brain and skull images allows comparison of the relationship between phenotypes in the brain and those in the skull. We observe a close fit between the brain and skull of two genetic mouse models that both show abnormal brain and skull phenotypes. Application of these three-dimensional image analyses in a broader range of mouse mutants will provide a map of the relationships between brain and skull phenotypes generally and allow characterization of patterns of similarities and differences. PMID:22947655

Cloverleaf skull with generalised bone dysplasia

International Nuclear Information System (INIS)

Kozlowski, K.; Warren, P.S.; Fisher, C.C.; Royal Hospital for Women, Camperdown

1985-01-01

A case of cloverleaf skull with generalised bone dysplasia is reported. The authors believe that bone dysplasia associated with cloverleaf is neither identical with thanatophoric dysplasia nor achondroplasia. Until identity of thanatophoric dysplasia and cloverleaf skull with generalised bone dysplasia is proved the diseases should be looked upon as separate entities and the wording ''thanatophoric dysplasia with cloverleaf skull'' should be abolished. (orig.)

Remote Handling Devices for Disposition of Enriched Uranium Reactor Fuel Using Melt-Dilute Process

International Nuclear Information System (INIS)

Heckendorn, F.M.

2001-01-01

Remote handling equipment is required to achieve the processing of highly radioactive, post reactor, fuel for the melt-dilute process, which will convert high enrichment uranium fuel elements into lower enrichment forms for subsequent disposal. The melt-dilute process combines highly radioactive enriched uranium fuel elements with deleted uranium and aluminum for inductive melting and inductive stirring steps that produce a stable aluminum/uranium ingot of low enrichment

About Eddy Currents in Induction Melting Processes

Directory of Open Access Journals (Sweden)

Gafiţa Nicolae-Bogdan

2008-05-01

Full Text Available In this paper we present a method forcomputing the eddy currents in induction meltingprocesses for non-ferrous alloys. We take intoconsideration the situation when only the crucible ismoving, inside the coils. This fact makes differentialcomputation methods to be hard to apply, because isnecessary to generate a new mesh and a new systemmatrix for every for every new position of the cruciblerelated to the coils. Integral methods cancel thisdrawback because the mesh is generated only for thedomains with eddy currents. For integral methods, themesh and the inductance matrix remain unchangedduring the movement of the crucible; only the free termsof the equation system will change.

Cloverleaf skull with generalised bone dysplasia

Energy Technology Data Exchange (ETDEWEB)

Kozlowski, K.; Warren, P.S.; Fisher, C.C.

1985-09-01

A case of cloverleaf skull with generalised bone dysplasia is reported. The authors believe that bone dysplasia associated with cloverleaf is neither identical with thanatophoric dysplasia nor achondroplasia. Until identity of thanatophoric dysplasia and cloverleaf skull with generalised bone dysplasia is proved the diseases should be looked upon as separate entities and the wording ''thanatophoric dysplasia with cloverleaf skull'' should be abolished.

Glass manufacturing through induction

International Nuclear Information System (INIS)

Boen, R.; Paya, B.; Roscini, M.; Fautrelle, Y.; Tuaz, F.; Delage, D.

1991-01-01

Oxides and glasses are electrical and thermal insulators, but show the characteristic of being weakly conductors of electricity when they are melt. It is then possible to heat them through HF induction. This interesting property allows the development of a melting process in cold crucible induction furnace. The process is being studied and developed by a consortium made up of CFEI, CEA Marcoule, ELECTRICITE DE FRANCE and MADYLAM laboratory. The studies include 2 parts: a) One experimental part to develop the technology and research for satisfying configurations, through a small size platform (10 to 30 kg/h). The long run continuous pouring melting tests made on different kinds of glass allow to go-on with industrial range units. b) One theoretical part to understand the magneto-thermo-hydraulic phenomenon hardly in relation with the heavy dependence of the physical characteristics (electrical and heat conductivities, viscosity) according to temperature. 6 refs., 4 figs [fr

Earliest directly-dated human skull-cups.

Directory of Open Access Journals (Sweden)

Silvia M Bello

Full Text Available BACKGROUND: The use of human braincases as drinking cups and containers has extensive historic and ethnographic documentation, but archaeological examples are extremely rare. In the Upper Palaeolithic of western Europe, cut-marked and broken human bones are widespread in the Magdalenian (∼15 to 12,000 years BP and skull-cup preparation is an element of this tradition. PRINCIPAL FINDINGS: Here we describe the post-mortem processing of human heads at the Upper Palaeolithic site of Gough's Cave (Somerset, England and identify a range of modifications associated with the production of skull-cups. New analyses of human remains from Gough's Cave demonstrate the skilled post-mortem manipulation of human bodies. Results of the research suggest the processing of cadavers for the consumption of body tissues (bone marrow, accompanied by meticulous shaping of cranial vaults. The distribution of cut-marks and percussion features indicates that the skulls were scrupulously 'cleaned' of any soft tissues, and subsequently modified by controlled removal of the facial region and breakage of the cranial base along a sub-horizontal plane. The vaults were also 'retouched', possibly to make the broken edges more regular. This manipulation suggests the shaping of skulls to produce skull-cups. CONCLUSIONS: Three skull-cups have been identified amongst the human bones from Gough's Cave. New ultrafiltered radiocarbon determinations provide direct dates of about 14,700 cal BP, making these the oldest directly dated skull-cups and the only examples known from the British Isles.

The conductivity of neonatal piglet skulls

International Nuclear Information System (INIS)

Pant, Shilpa; Te, Tang; Tucker, Aaron; Sadleir, Rosalind J

2011-01-01

We report the first measured values of conductivities for neonatal mammalian skull samples. We measured the average radial (normal to the skull surface) conductivity of fresh neonatal piglet skull samples at 1 kHz and found it to be around 30 mS m −1 at ambient room temperatures of about 23 °C. Measurements were made on samples of either frontal or parietal cranial bone, using a saline-filled cell technique. The conductivity value we observed was approximately twice the values reported for adult skulls (Oostendorp et al 2000 IEEE Trans. Biomed. Eng. 47 1487–92) using a similar technique, but at a frequency of around 5 Hz. Further, we found that the conductivity of skull fragments increased linearly with thickness. We found evidence that this was related to differences in composition between the frontal and parietal bone samples tested, which we believe is because frontal bones contained a larger fraction of higher conductivity cancellous bone material

Skull development in the muscular dystrophic mouse

DEFF Research Database (Denmark)

Vilmann, H; Kirkeby, S; Moss, M L

1989-01-01

Roentgencephalometric tracings of skulls of 7-week-old normal and muscular dystrophic mice were compared. A marked size reduction of the dystrophic skulls relative to the normal ones was observed. However, the visceral parts of the dystrophic skull were more reduced in size than the neural parts....

Analysis of six Vietnamese trophy skulls.

Science.gov (United States)

Sledzik, P S; Ousley, S

1991-03-01

This report presents morphologic, metric, and contextual information on six documented trophy skull specimens confiscated from U.S. servicemen during the Vietnam War. Additional information on the history and occurrence of trophy skull collecting is provided. This sample, consisting mostly of young Vietnamese males, exhibits graffiti, painting, and other evidence of postmortem decorative modification. Identification of trophy skulls is important to medicolegal and anthropological researchers in distinguishing trophy remains from archaeological and forensic specimens.

Broadband acoustic properties of a murine skull.

Science.gov (United States)

Estrada, Héctor; Rebling, Johannes; Turner, Jake; Razansky, Daniel

2016-03-07

It has been well recognized that the presence of a skull imposes harsh restrictions on the use of ultrasound and optoacoustic techniques in the study, treatment and modulation of the brain function. We propose a rigorous modeling and experimental methodology for estimating the insertion loss and the elastic constants of the skull over a wide range of frequencies and incidence angles. A point-source-like excitation of ultrawideband acoustic radiation was induced via the absorption of nanosecond duration laser pulses by a 20 μm diameter microsphere. The acoustic waves transmitted through the skull are recorded by a broadband, spherically focused ultrasound transducer. A coregistered pulse-echo ultrasound scan is subsequently performed to provide accurate skull geometry to be fed into an acoustic transmission model represented in an angular spectrum domain. The modeling predictions were validated by measurements taken from a glass cover-slip and ex vivo adult mouse skulls. The flexible semi-analytical formulation of the model allows for seamless extension to other transducer geometries and diverse experimental scenarios involving broadband acoustic transmission through locally flat solid structures. It is anticipated that accurate quantification and modeling of the skull transmission effects would ultimately allow for skull aberration correction in a broad variety of applications employing transcranial detection or transmission of high frequency ultrasound.

Skull penetrating wound

International Nuclear Information System (INIS)

Gonzalez Orlandi, Yvei; Junco Martin, Reinel; Rojas Manresa, Jorge; Duboy Limonta, Victor; Matos Herrera, Omar; Saez Corvo, Yunet

2011-01-01

The cranioencephalic trauma is common in the emergence centers to care for patients with multiple traumata and it becames in a health problem in many countries. Skull penetrating trauma is located in a special place due to its low frequency. In present paper a case of male patient aged 52 severely skull-injured with penetrating wound caused by a cold steel that remained introduced into the left frontotemporal region. After an imaging study the emergence surgical treatment was applied and patient evolves adequately after 25 days of hospitalization. Nowadays, she is under rehabilitation treatment due to a residual right hemiparesis.(author)

Computerized tomographic diagnosis of basal skull fracture

International Nuclear Information System (INIS)

Tanaka, Tokutaro; Shimoyama, Ichiro; Endoh, Mitsutoshi; Ninchoji, Toshiaki; Uemura, Kenichi.

1984-01-01

The diagnosis of basal skull fractures used to be difficult, particularly on the basis of routine skull roentgenography alone. We have now examined the diagnostic value of conventional computerized tomography in basal skull fractures. We studied 82 cases clinically diagnosed as basal skull fractures. We examined them based on at least one of the following computerized tomographic criteria for basal skull fractures: 1) fracture line(s), 2) intracranial air, 3) fluid in the paranasal sinuses, and 4) fluid in the middle ear, including the mastoid air cells. The signs of the fracture line and of the intracranial air are definite indications of basal skull fracture, but the signs of fluid in the paranasal sinuses and/or in the middle ear are not definite. When combined, however, with such other clinical signs as black eye, Battle's sign, CSF leakage, CSF findings, and profuse nasal or ear bleeding, the diagnosis is more reliable. Seventy cases (85.4%) in this series had basal skull fractures according to our computerized tomographic criteria. Among them , 26 cases (31.7%) were diagnosed with fracture lines, 17 cases (20.7%) with intracranial air, 16 cases (19.5%) with fluid in the paranasal sinuses, 10 cases (12.2%) with fluid in the middle ear, and one case (1.2%) with fluid in both. Twelve cases (14.6%) of the 82 cases clinically diagnosed as basal skull fractures could not have been diagnosed on our computerized tomographic criteria alone. We diagnosed them because of CSF leakage, CSF findings, surgical findings, etc. (author)

Hydrogen effect on different melts of steel 03Cr10Ni10Mo2(Ti,Al)

International Nuclear Information System (INIS)

Hruby, J.; Novosad, P.; Axamit, R.

1984-01-01

The effect of hydrogen on martensitic 03Cr10Ni10Mo2(Ti,Al) steel was studied following vacuum induction melting and electroslag remelting with and without the effect of radiation. Under the influence of hydrogen and under the same parameters of catodic hydrogen charging of steel after vacuum induction melting shows a 20 - 30% reduction in total ductility. Steels after electroslag remelting show a higher reduction in total ductility - within the range of 26 - 33%, i.e., 33 - 43% for different melts, and contraction Z shows a reduction of 23 - 59%. Electroslag remelted steels show a greater reduction in plasticity owing to hydrogen than steels melted in vacuum induction furnaces. The reduction of the yield point and the breaking strength owing to hydrogen are more explicit than in steel after vacuum melting. In non-irradiated hydrogenated samples a higher yield point was evident. (B.S.)

'Do not touch' lesions of the skull base

International Nuclear Information System (INIS)

Dobre, Mircea C.; Fischbein, Nancy

2014-01-01

Imaging of the skull base presents many challenges due to its anatomical complexity, numerous normal variants and lack of familiarity to many radiologists. As the skull base is a region which is not amenable to physical examination and as lesions of the skull base are generally difficult to biopsy and even more difficult to operate on, the radiologist plays a major role in directing patient management via accurate image interpretation. Knowledge of the skull base should not be limited to neuroradiologists and head and neck radiologists, however, as the central skull base is routinely included in the field of view when imaging the brain, cervical spine, or head and neck with computed tomography or magnetic resonance imaging, and hence, its nuances should be familiar to general radiologists as well. We herein review the imaging findings of a subcategory of lesions of the central skull base, the 'do not touch' lesions.

21 CFR 882.4460 - Neurosurgical head holder (skull clamp).

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Neurosurgical head holder (skull clamp). 882.4460... holder (skull clamp). (a) Identification. A neurosurgical head holder (skull clamp) is a device used to clamp the patient's skull to hold head and neck in a particular position during surgical procedures. (b...

Growth of the skull in young children in Baotou, China.

Science.gov (United States)

Hou, Hai-dong; Liu, Ming; Gong, Ke-rui; Shao, Guo; Zhang, Chun-Yang

2014-09-01

There are some controversies about the optimal time to perform skull repair in very young Chinese children because of the rapid skull growth in this stage of life. The purpose of this current study is to describe the characteristics of skull growth and to discuss the optimal time for skull repair in young Chinese children with skull defects. A total of 112 children born in the First Affiliated Hospital of Baotou Medical College were measured for six consecutive years starting in 2006. Cranial length (CL, linear distance between the eyebrows to the pillow tuberosity), cranial width (CW, double-sided linear distance of connection of external auditory canal), ear over the top line (EOTL), the eyebrows-the posterior tuberosity line (EPTL), and head circumference (HC) were measured to describe the skull growth. The most rapid period of skull growth occurs during the first year of life. The second and third most rapid periods are the second and third years, respectively. Then, the skull growth slowed and the values of the skull growth index of 6-year-old children were close to those of adults. Children 0-1 years old should not receive skull repair due to their rapid skull growth. The indexes of children 3 years old or older were close to those of the adult; therefore, 3 years old or older may receive skull repair.

The Development of Skull Prosthesis Through Active Contour Model.

Science.gov (United States)

Chen, Yi-Wen; Shih, Cheng-Ting; Cheng, Chen-Yang; Lin, Yu-Cheng

2017-09-09

Skull defects result in brain infection and inadequate brain protection and pose a general danger to patient health. To avoid these situations and prevent re-injury, a prosthesis must be constructed and grafted onto the deficient region. With the development of rapid customization through additive manufacturing and 3D printing technology, skull prostheses can be fabricated accurately and efficiently prior to cranioplasty. However, an unfitted skull prosthesis made with a metal implant can cause repeated infection, potentially necessitating secondary surgery. This paper presents a method of creating suitably geometric graphics of skull defects to be applied in skull repair through active contour models. These models can be adjusted in each computed tomography slice according to the graphic features, and the curves representing the skull defect can be modeled. The generated graphics can adequately mimic the natural curvature of the complete skull. This method will enable clinical surgeons to rapidly implant customized prostheses, which is of particular importance in emergency surgery. The findings of this research can help surgeons provide patients with skull defects with treatment of the highest quality.

Modeling skull's acoustic attenuation and dispersion on photoacoustic signal

Science.gov (United States)

Mohammadi, L.; Behnam, H.; Nasiriavanaki, M. R.

2017-03-01

Despite the great promising results of a recent new transcranial photoacoustic brain imaging technology, it has been shown that the presence of the skull severely affects the performance of this imaging modality. In this paper, we investigate the effect of skull on generated photoacoustic signals with a mathematical model. The developed model takes into account the frequency dependence attenuation and acoustic dispersion effects occur with the wave reflection and refraction at the skull surface. Numerical simulations based on the developed model are performed for calculating the propagation of photoacoustic waves through the skull. From the simulation results, it was found that the skull-induced distortion becomes very important and the reconstructed image would be strongly distorted without correcting these effects. In this regard, it is anticipated that an accurate quantification and modeling of the skull transmission effects would ultimately allow for skull aberration correction in transcranial photoacoustic brain imaging.

21 CFR 882.5960 - Skull tongs for traction.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Skull tongs for traction. 882.5960 Section 882...) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Therapeutic Devices § 882.5960 Skull tongs for traction. (a) Identification. Skull tongs for traction is an instrument used to immobilize a patient with a...

Skull thickness in patients with clefts

DEFF Research Database (Denmark)

Arntsen, T; Kjaer, I; Sonnesen, L

2010-01-01

The purpose was to analyze skull thickness in incomplete cleft lip (CL), cleft palate (CP), and combined cleft lip and palate (UCLP).......The purpose was to analyze skull thickness in incomplete cleft lip (CL), cleft palate (CP), and combined cleft lip and palate (UCLP)....

Implant-retained skull prosthesis to cover a large defect of the hairy skull resulting from treatment of a basal cell carcinoma: A clinical report.

Science.gov (United States)

Hoekstra, Jitske; Vissink, Arjan; Raghoebar, Gerry M; Visser, Anita

2017-05-01

Skin carcinoma, particularly basal cell carcinoma, and its treatment can result in large defects of the hairy skull. A 53-year-old man is described who was surgically treated for a large basal cell carcinoma invading the skin and underlying tissue at the top of the hairy skull. Treatment consisted of resecting the tumor and external part of the skull bone. To protect the brain and to cover the defect of the hairy skull, an acrylic resin skull prosthesis with hair was designed to mask the defect. The skull prosthesis was retained on 8 extraoral implants placed at the margins of the defect in the skull bone. The patient was satisfied with the treatment outcome. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Skull defect reconstruction based on a new hybrid level set.

Science.gov (United States)

Zhang, Ziqun; Zhang, Ran; Song, Zhijian

2014-01-01

Skull defect reconstruction is an important aspect of surgical repair. Historically, a skull defect prosthesis was created by the mirroring technique, surface fitting, or formed templates. These methods are not based on the anatomy of the individual patient's skull, and therefore, the prosthesis cannot precisely correct the defect. This study presented a new hybrid level set model, taking into account both the global optimization region information and the local accuracy edge information, while avoiding re-initialization during the evolution of the level set function. Based on the new method, a skull defect was reconstructed, and the skull prosthesis was produced by rapid prototyping technology. This resulted in a skull defect prosthesis that well matched the skull defect with excellent individual adaptation.

CT findings of skull tumors forming subcutaneous masses

International Nuclear Information System (INIS)

Niida, Hirohito; Takeda, Norio; Onda, Kiyoshi; Tanaka, Ryuichi

1991-01-01

Some characteristics of CT findings in 27 patients with skull tumors forming subcutaneous tumors were studied. There were sixteen metastatic skull tumors, six primary skull tumors, and five meningiomas. A CT scan was found to be helpful in the diagnosis of the lesions. Especially, bone-window CT images proved very sensitive in the detection of destructive and permeative lesions of the skull. In 19 of the 27 cases, some lytic lesions were observed. In all cases with skull metastasis from carcinomas, a complete osteolytic change of the skull was observed. Furthermore, all of the metastatic tumors from thyroid carcinoma showed well circumscribed and homogeneously enhanced lesions, in contrast with the other metastatic carcinomas, which usually showed heterogeneously enhanced lesions with irregular margins. Osteoblastic changes were characteristically observed in all cases of meningiomas, osteosarcoma, and chondrosarcoma. Meningiomas were located mainly in the intracranial region and extended extracranially. In one case of malignant lymphoma, one of a neuroblastoma, and one of leukemia, there was little or no gross cortical bone change, despite a large mass. (author)

Skulls and Human Evolution: The Use of Casts of Anthropoid Skulls in Teaching Concepts of Human Evolution.

Science.gov (United States)

Gipps, John

1991-01-01

Proposes the use of a series of 11 casts of fossil skulls as a method of teaching about the theory of human evolution. Students explore the questions of which skulls are "human" and which came first in Homo Sapien development, large brain or upright stance. (MDH)

Craniometric Indices of Nigeria Skulls

OpenAIRE

Orish CN; Ibeachu PC

2016-01-01

Introduction: Craniometric indices show the percentage relationship between different dimensions. It is an important parameter for classification of race and sex of individuals of unknown identity. This study was undertaken to determine the craniometric indices of gnathic, palatal, orbital, cranial and nasal indices of Nigerian skulls. Materials and Methods: One hundred adult dry skulls, (78 males, and 22 females) free from damage and deformities from eleven Departments of Anatomy in Nige...

Skull's acoustic attenuation and dispersion modeling on photoacoustic signal

Science.gov (United States)

Mohammadi, Leila; Behnam, Hamid; Tavakkoli, Jahan; Nasiriavanaki, Mohammadreza

2018-02-01

Despite the promising results of the recent novel transcranial photoacoustic (PA) brain imaging technology, it has been demonstrated that the presence of the skull severely affects the performance of this imaging modality. We theoretically investigate the effects of acoustic heterogeneity induced by skull on the PA signals generated from single particles, with firstly developing a mathematical model for this phenomenon and then explore experimental validation of the results. The model takes into account the frequency dependent attenuation and dispersion effects occur with wave reflection, refraction and mode conversion at the skull surfaces. Numerical simulations based on the developed model are performed for calculating the propagation of photoacoustic waves through the skull. The results show a strong agreement between simulation and ex-vivo study. The findings are as follow: The thickness of the skull is the most PA signal deteriorating factor that affects both its amplitude (attenuation) and phase (distortion). Also we demonstrated that, when the depth of target region is low and it is comparable to the skull thickness, however, the skull-induced distortion becomes increasingly severe and the reconstructed image would be strongly distorted without correcting these effects. It is anticipated that an accurate quantification and modeling of the skull transmission effects would ultimately allow for aberration correction in transcranial PA brain imaging.

Quality criteria in diagnostic radiology of the skull

International Nuclear Information System (INIS)

Friedmann, G.

1985-01-01

Diagnostic survey radiology of the skull relies on pictures to be taken if indicated and to meet all conceivable requirements. Those radiograph directions and projections were selected out of the profusion of known and described ones which allow both as small a number of pictures and as comprehensive a demonstration of all skull sections and1structures as possible. With this in mind, quality criteria for plain radiographs of the skull taken laterally and sagittably, for partial radiographs of the visceral cranium including orbit and of the base of the skull including petrons bone are described. (orig./MG) [de

Introduction: surgical management of skull base meningiomas.

Science.gov (United States)

Zada, Gabriel; Başkaya, Mustafa K; Shah, Mitesh V

2017-10-01

Meningiomas represent the most common primary intracranial neoplasm treated by neurosurgeons. Although multimodal treatment of meningiomas includes surgery, radiation-based treatments, and occasionally medical therapy, surgery remains the mainstay of treatment for most symptomatic meningiomas. Because of the intricate relationship of the dura mater and arachnoid mater with the central nervous system and cranial nerves, meningiomas can arise anywhere along the skull base or convexities, and occasionally even within the ventricular system, thereby mandating a catalog of surgical approaches that neurosurgeons may employ to individualize treatment for patients. Skull base meningiomas represent some of the most challenging pathology encountered by neurosurgeons, on account of their depth, invasion, vascularity, texture/consistency, and their relationship to bony anatomy, cranial nerves, and blood vessels. Resection of complex skull base meningiomas often mandates adequate bony removal to achieve sufficient exposure of the tumor and surrounding region, in order to minimize brain retraction and optimally identify, protect, control, and manipulate sensitive neurovascular structures. A variety of traditional skull base approaches has evolved to address complex skull base tumors, of which meningiomas are considered the paragon in terms of both complexity and frequency. In this supplemental video issue of Neurosurgical Focus, contributing authors from around the world provide instructional narratives demonstrating resection of a variety of skull base meningiomas arising from traditionally challenging origins, including the clinoid processes, tuberculum sellae, dorsum sellae, petroclival region, falco-tentorial region, cerebellopontine angle, and foramen magnum. In addition, two cases of extended endoscopic endonasal approaches for tuberculum sellae and dorsum sellae meningiomas are presented, representing the latest evolution in accessing the skull base for selected tumors

A large, switchable optical clearing skull window for cerebrovascular imaging

Science.gov (United States)

Zhang, Chao; Feng, Wei; Zhao, Yanjie; Yu, Tingting; Li, Pengcheng; Xu, Tonghui; Luo, Qingming; Zhu, Dan

2018-01-01

Rationale: Intravital optical imaging is a significant method for investigating cerebrovascular structure and function. However, its imaging contrast and depth are limited by the turbid skull. Tissue optical clearing has a great potential for solving this problem. Our goal was to develop a transparent skull window, without performing a craniotomy, for use in assessing cerebrovascular structure and function. Methods: Skull optical clearing agents were topically applied to the skulls of mice to create a transparent window within 15 min. The clearing efficacy, repeatability, and safety of the skull window were then investigated. Results: Imaging through the optical clearing skull window enhanced both the contrast and the depth of intravital imaging. The skull window could be used on 2-8-month-old mice and could be expanded from regional to bi-hemispheric. In addition, the window could be repeatedly established without inducing observable inflammation and metabolic toxicity. Conclusion: We successfully developed an easy-to-handle, large, switchable, and safe optical clearing skull window. Combined with various optical imaging techniques, cerebrovascular structure and function can be observed through this optical clearing skull window. Thus, it has the potential for use in basic research on the physiopathologic processes of cortical vessels. PMID:29774069

Trans-skull ultrasonic Doppler system aided by fuzzy logic

Science.gov (United States)

Hata, Yutaka; Nakamura, Masato; Yagi, Naomi; Ishikawa, Tomomoto

2012-06-01

This paper describes a trans-skull ultrasonic Doppler system for measuring the blood flow direction in brain under skull. In this system, we use an ultrasonic array probe with the center frequency of 1.0 MHz. The system determines the fuzzy degree of blood flow by Doppler Effect, thereby it locates blood vessel. This Doppler Effect is examined by the center of gravity shift of the frequency magnitudes. In in-vitro experiment, a cow bone was employed as the skull, and three silicon tubes were done as blood vessels, and bubble in water as blood. We received the ultrasonic waves through a protein, the skull and silicon tubes in order. In the system, fuzzy degrees are determined with respect to the Doppler shift, amplitude of the waves and attenuation of the tissues. The fuzzy degrees of bone and blood direction are calculated by them. The experimental results showed that the system successfully visualized the skull and flow direction, compared with the location and flow direction of the phantom. Thus, it detected the flow direction by Doppler Effect under skull, and automatically extracted the region of skull and blood vessel.

Water boiling on the corium melt surface under VVER severe accident conditions

International Nuclear Information System (INIS)

Bechta, S.V.; Vitol, S.A.; Krushinov, E.V.; Granovsky, V.S.; Sulatsky, A.A.; Khabensky, V.B.; Lopukh, D.B.; Petrov, Y.B.; Pechenkov, A.Y.

2000-01-01

Experimental results are presented on the interaction of corium melt with water supplied on its surface. The tests were conducted in the 'Rasplav-2' experimental facility. Corium melt was generated by induction melting in the cold crucible. The following data were obtained: heat transfer at boiling water-melt surface interaction, gas and aerosol release, post-interaction solidified corium structure. The corium melt charge had the following composition, mass%: 60% UO 2+x -16% ZrO 2 -15% Fe 2 O 3 -6% Cr 2 O 3 -3% Ni 2 O 3 . The melt surface temperature ranged within 1920-1970 K. (orig.)

Water boiling on the corium melt surface under VVER severe accident conditions

International Nuclear Information System (INIS)

Bechta, S.V.; Vitol, S.A.; Krushinov, E.V.

1999-01-01

Experimental results are presented on the interaction between corium melt and water supplied onto its surface. The tests were conducted on the Rasplav-2' experimental facility. Induction melting in a cold crucible was used to produce the melt. The following data have been obtained: heat transfer at water boiling on the melt surface, aerosol release, structure of the post-interaction solidified corium. The corium melt had the following composition, mass %: 60%UO 2 - 16%ZrO 2 - 15%Fe 2 O 3 - 6%Cr 2 O 3 -3%Ni 2 O 3 . The melt surface temperature was 1650-1700degC. (author)

The Genetics of Canine Skull Shape Variation

Science.gov (United States)

Schoenebeck, Jeffrey J.; Ostrander, Elaine A.

2013-01-01

A dog’s craniofacial diversity is the result of continual human intervention in natural selection, a process that began tens of thousands of years ago. To date, we know little of the genetic underpinnings and developmental mechanisms that make dog skulls so morphologically plastic. In this Perspectives, we discuss the origins of dog skull shapes in terms of history and biology and highlight recent advances in understanding the genetics of canine skull shapes. Of particular interest are those molecular genetic changes that are associated with the development of distinct breeds. PMID:23396475

Sagittal synostosis: I. Preoperative morphology of the skull

DEFF Research Database (Denmark)

Guimaraes-Ferreira, J.; Gewalli, F.; David, L.

2006-01-01

The aim of this study was to characterise the preoperative morphology of the skull in sagittal synostosis in an objective and quantified way. The shapes of the skulls of 105 patients with isolated premature synostosis of the sagittal suture ( SS group) were studied and compared with those......, skull base, and orbit ( 42 in the lateral and 46 in the frontal projections), the production of plots of mean shape for each group, and the intergroup comparison of a series of 81 variables ( linear distance between selected landmarks, and angles defined by groups of three landmarks). Data from...... skull width. Comparison of the mean values of an SS subgroup to age-matched normative data showed a longer (p differ significantly...

Morphological convergence in ‘river dolphin’ skulls

Directory of Open Access Journals (Sweden)

Charlotte E. Page

2017-11-01

Full Text Available Convergent evolution can provide insights into the predictability of, and constraints on, the evolution of biodiversity. One striking example of convergence is seen in the ‘river dolphins’. The four dolphin genera that make up the ‘river dolphins’ (Inia geoffrensis, Pontoporia blainvillei, Platanista gangetica and Lipotes vexillifer do not represent a single monophyletic group, despite being very similar in morphology. This has led many to using the ‘river dolphins’ as an example of convergent evolution. We investigate whether the skulls of the four ‘river dolphin’ genera are convergent when compared to other toothed dolphin taxa in addition to identifying convergent cranial and mandibular features. We use geometric morphometrics to uncover shape variation in the skulls of the ‘river dolphins’ and then apply a number of phylogenetic techniques to test for convergence. We find significant convergence in the skull morphology of the ‘river dolphins’. The four genera seem to have evolved similar skull shapes, leading to a convergent morphotype characterised by elongation of skull features. The cause of this morphological convergence remains unclear. However, the features we uncover as convergent, in particular elongation of the rostrum, support hypotheses of shared feeding mode or diet and thus provide the foundation for future work into convergence within the Odontoceti.

The MDP skull uptake test: A new diagnostic tool

International Nuclear Information System (INIS)

Ell, P.J.; Jarritt, P.H.; Cullum, I.; Lui, D.

1984-01-01

An original approach to the measurement of bone turnover is presented. With SPECT, the authors have measured in pgr/ml, the uptake of MDP by the skull in man. The Cleon 710 scanner, ring phantoms and bone biopsies were used for ultimate in vivo/in vitro count recovery correlation and calibration. A normal range for 24 patients was found: 8.5 to 19.5 pgr/ml with a mean of 14. For patients with bony metastases (12), the values were: 22.5 to 50, mean of 30. For 5 patients with osteomalacia, the values were 46 to 68, mean of 62: for 12 patients with hyperparathyroidism, the values were 37 to 48.5, mean of 43. In 3 patients with Pagets disease, the values were 58.5 to 75, with a mean of 65. In 76 patients with metastatic disease to bone, the conventional wholebody bone scan was investigated against the following: 24h wholebody retention of MDP (WBR), skull uptake as described and GFR by Cr-51-DTPA. There is a correlation between GFR and WBR - r=0.67. There is a lesser correlation between GFR and skull uptake - r=0.3. There is no correlation between skull uptake and WBR - r=0.1. The comparison of skull uptake data with normal whole body bone scans leads to a significant proportion of cancer patients with positive skull uptake data. Monostotic disease (especially if metabolic in nature) expresses itself by abnormal skull uptake even if the clinical site of abnormality lies outside the skull. This new technique is ideal as a tool to investigate phosphonate concentration in bone. With it, the authors have shown the effect of specific activity of label on skull uptake, which increases as the specific activity of labelled MDP decreases

[Skull cult. Trophy heads and tzantzas in pre-Columbian America].

Science.gov (United States)

Carod-Artal, F J

2012-07-16

The skull cult is a cultural tradition that dates back to at least Neolithic times. Its main manifestations are trophy heads, skull masks, moulded skulls and shrunken heads. The article reviews the skull cult in both pre-Columbian America and the ethnographic present from a neuro-anthropological perspective. The tradition of shaping and painting the skulls of ancestors goes back to the Indo-European Neolithic period (Natufian culture and Gobekli Tepe). In Mesoamerica, post-mortem decapitation was the first step of a mortuary treatment that resulted in a trophy head, a skull for the tzompantli or a skull mask. The lithic technology utilised by the Mesoamerican cultures meant that disarticulation had to be performed in several stages. Tzompantli is a term that refers both to a construction where the heads of victims were kept and to the actual skulls themselves. Skull masks are skulls that have been artificially modified in order to separate and decorate the facial part; they have been found in the Templo Mayor of Tenochtitlan. The existence of trophy heads is well documented by means of iconographic representations on ceramic ware and textiles belonging to the Paraca, Nazca and Huari cultures of Peru. The Mundurucu Indians of Brazil and the Shuar or Jivaroan peoples of Amazonian Ecuador have maintained this custom down to the present day. The Shuar also shrink heads (tzantzas) in a ritual process. Spanish chroniclers such as Fray Toribio de Benavente 'Motolinia' and Gaspar de Carvajal spoke of these practices. In pre-Columbian America, the tradition of decapitating warriors in order to obtain trophy heads was a wide-spread and highly developed practice.

Water boiling on the corium melt surface under VVER severe accident conditions

Energy Technology Data Exchange (ETDEWEB)

Bechta, S.V.; Vitol, S.A.; Krushinov, E.V.; Granovsky, V.S.; Sulatsky, A.A.; Khabensky, V.B. [Sci. Res. Technol. Inst., Leningrad (Russian Federation); Lopukh, D.B.; Petrov, Y.B.; Pechenkov, A.Y. [St. Petersburg Electrotechnical University (SPbEU), Prof. Popov st 5/3, St. Petersburg (Russian Federation)

2000-01-01

Experimental results are presented on the interaction of corium melt with water supplied on its surface. The tests were conducted in the 'Rasplav-2' experimental facility. Corium melt was generated by induction melting in the cold crucible. The following data were obtained: heat transfer at boiling water-melt surface interaction, gas and aerosol release, post-interaction solidified corium structure. The corium melt charge had the following composition, mass%: 60% UO{sub 2+x}-16% ZrO{sub 2}-15% Fe{sub 2}O{sub 3}-6% Cr{sub 2}O{sub 3}-3% Ni{sub 2}O{sub 3}. The melt surface temperature ranged within 1920-1970 K. (orig.)

Water boiling on the corium melt surface under VVER severe accident conditions

Energy Technology Data Exchange (ETDEWEB)

Bechta, S.V.; Vitol, S.A.; Krushinov, E.V. [Research Institute of Technology, Sosnovy Bor (NITI) (RU)] [and others

1999-07-01

Experimental results are presented on the interaction between corium melt and water supplied onto its surface. The tests were conducted on the Rasplav-2' experimental facility. Induction melting in a cold crucible was used to produce the melt. The following data have been obtained: heat transfer at water boiling on the melt surface, aerosol release, structure of the post-interaction solidified corium. The corium melt had the following composition, mass %: 60%UO{sub 2}- 16%ZrO{sub 2}- 15%Fe{sub 2}O{sub 3} - 6%Cr{sub 2}O{sub 3}-3%Ni{sub 2}O{sub 3}. The melt surface temperature was 1650-1700degC. (author)

Paraperesis: A rare complication after depressed skull fracture ...

African Journals Online (AJOL)

Paraperesis: A rare complication after depressed skull fracture. ... presentations, but midline depressed skull fracture presenting as motor weakness of both lower ... Patient was managed conservatively, made remarkable recovery and was ...

Skull base tumors: a kaleidoscope of challenge.

Science.gov (United States)

Khanna, J N; Natrajan, Srivalli; Galinde, Jyotsna

2014-08-01

Resection of skull base lesions has always been riddled with problems like inadequate access, proximity to major vessels, dural tears, cranial nerve damage, and infection. Understanding the modular concept of the facial skeleton has led to the development of transfacial swing osteotomies that facilitates resection in a difficult area with minimal morbidity and excellent cosmetic results. In spite of the current trend toward endonasal endoscopic management of skull base tumors, our series presents nine cases of diverse extensive skull base lesions, 33% of which were recurrent. These cases were approached through different transfacial swing osteotomies through the mandible, a midfacial swing, or a zygomaticotemporal osteotomy as dictated by the three-dimensional spatial location of the lesion, and its extent and proximity to vital structures. Access osteotomies ensured complete removal and good results through the most direct and safe route and good vascular control. This reiterated the fact that transfacial approaches still hold a special place in the management of extensive skull base lesions.

The Skull of Phyllomedusa sauvagii (Anura, Hylidae).

Science.gov (United States)

Ruiz-Monachesi, Mario R; Lavilla, Esteban O; Montero, Ricardo

2016-05-01

The hylid genus Phyllomedusa comprises charismatic frogs commonly known as monkey, leaf or green frogs, and is the most diverse genus of the subfamily Phyllomedusinae, including about 31 species. Although there is some information about the anatomy of these frogs, little is known about the osteology. Here the adult skull of Phyllomedusa sauvagii, both articulated and disarticulated, is described and the intraspecific variation is reported. Additionally, cartilage associated with the adult skull, such as the nasal capsules, auditory apparatus, and hyobranchial apparatus, are included in the analysis. Further examination of disarticulated bones reveals their remarkable complexity, specifically in the sphenethmoid and of the oocipital region. The description of disarticulated bones is useful for the identification of fossil remains as well as providing morphological characteristics that are phylogenetically informative. When comparing the skull morphology with the available information of other species of the genus, Phyllomesusa sauvagii skull resembles more that of P. vaillantii and P. venusta than P. atelopoides. © 2016 Wiley Periodicals, Inc.

Analysis of skull asymmetry in different historical periods using radiological examinations

International Nuclear Information System (INIS)

Gawlikowska, A.; Czerwinski, F.; Dzieciolowska, E.; Miklaszewska, D.; Adamiec, E.; Szczurowski, J.

2007-01-01

Asymmetry is a very common phenomenon in nature. Occurrence of asymmetry and knowledge of correct structure, especially a range of variability which is not a pathology but only an individual variation, are the basis for interpretation of results of radiological examination of the skulls both in research work and in diagnostic examinations, which are widely performed in modern medicine. There are many methods of estimation of the asymmetry. The aim of this study was to estimate the symmetry of skulls from selected historic populations. The studied material consisted of two skull populations - contemporary consisting of 82 skulls and medieval - 77 skulls from Grodek. X-rays in P-A and skull-base projections were performed. The images were scanned and calibrated by means of MicroStation 95 Academic Edition software. Using tools for measurement of vector elements, distances between selected bilateral points of the skull were taken. All data were analyzed statistically. Asymmetry was observed in the skulls of both populations. Some diameters were higher on the left side, some on the right side. High levels of asymmetry index in the superior facial part and in the posterior part of the skull base were observed. The levels of the asymmetry indexes in both groups were similar. Radiological pictures in two projections should be taken for correct analysis of the skull asymmetry. The examination of the asymmetry of the landmarks should be based on the analysis of diameters from two different points of reference. The human skull does not demonstrate a clear domination of one side. The largest variations were observed in the shape and localization of the foramina of the skull . It is associated with the differences of the position of the neurovascular elements which pass through these foramina. (author)

Diffusely increased uptake in the skull in normal bone scans

International Nuclear Information System (INIS)

Suematsu, Toru; Yoshida, Shoji; Motohara, Tomofumi; Fujiwara, Hirofumi; Nishii, Hironori; Komiyama, Toyozo; Yanase, Masakazu; Mizutani, Masahiro

1992-01-01

Diffusely increased skull uptake (a hot skull) is often seen in patients with bone metastases and metabolic disease. This finding is also, however, noticed in normal bone scans of aged women. To determine whether the hot skull could be considered a normal variant in elderly women and is associated to menopause, we studied 282 normal bone scans (166 women and 116 men without metabolic and hormonal disease; age range 11 to 84 yr). We divided the patients into eight age groups--ages 10-19, 20-29, 30-39, 40-49, 50-59, 60-69, 70-79, and 80-89 yrs. Measurements of skull uptake were obtained from anterior total body views using contrast-to-noise ratio (CNR). CNR for the skull was calculated using an equation. The sex dependent difference in skull uptake began to develop in the age group 30-39 yrs (p<0.05). The skull showed greater activity in women than in men for age groups from 30-39 to 80-89 yrs. In the age groups 50-59 and 60-69, the difference was particularly large (p<0.001). For women, the 50-59 yr age group had a significantly higher CNR than the 40-49 yr (p<0.01), 30-39 yr (p<0.05), and 20-29 yr age group (p<0.05). On the other hand, there was no significant difference between the 20-29 yr, 30-39 yr and 40-49 yr age groups. For men, the skull uptake was virtually unchanged with age. Our data strongly suggested that the hot skull in normal bone scan is related to menopausal estrogen deficiency. One should not necessarily regard it abnormal that elderly women suffer hot skull. (J.P.N.)

Management of osteomyelitis of the skull base

International Nuclear Information System (INIS)

Benecke, J.E. Jr.

1989-01-01

Osteomyelitis of the skull base is the most severe form of malignant otitis externa. As a result of having treated 13 patients with skull base osteomyelitis over a 4-year period, we have developed a method of staging and monitoring this malady using gallium and technetium scanning techniques. Stage I is localized to soft tissues, stage II is limited osteomyelitis, and stage III represents extensive skull base osteomyelitis. All stages are treated with appropriate antipseudomonal antibiotics. The duration of therapy depends upon the clearing of inflammation as shown on the gallium scan. Each case must be looked at independently and not subjected to an arbitrary treatment protocol

Patterns of integration in the canine skull: an inside view into the relationship of the skull modules of domestic dogs and wolves.

Science.gov (United States)

Curth, Stefan; Fischer, Martin S; Kupczik, Kornelius

2017-12-01

The skull shape variation in domestic dogs exceeds that of grey wolves by far. The artificial selection of dogs has even led to breeds with mismatching upper and lower jaws and maloccluded teeth. For that reason, it has been advocated that their skulls (including the teeth) can be divided into more or less independent modules on the basis of genetics, development or function. In this study, we investigated whether the large diversity of dog skulls and the frequent occurrence of orofacial disproportions can be explained by a lower integration strength between the modules of the skull and by deviations in their covariation pattern when compared to wolves. For that purpose, we employed geometric morphometric methods on the basis of 99 3D-landmarks representing the cranium (subdivided into rostrum and braincase), the mandible (subdivided into ramus and corpus), and the upper and lower tooth rows. These were taken from CT images of 196 dog and wolf skulls. First, we calculated the shape disparity of the mandible and the cranium in dogs and wolves. Then we tested whether the integration strength (measured by RV coefficient) and the covariation pattern (as analysed by partial least squares analysis) of the modules subordinate to the cranium and the mandible can explain differing disparity results. We show, contrary to our expectations, that the higher skull shape diversity in dogs is not explained by less integrated skull modules. Also, the pattern of their covariation in the dog skull can be traced back to similar patterns in the wolf. This shows that existing differences between wolves and dogs are at the utmost a matter of degree and not absolute. Copyright © 2017 Elsevier GmbH. All rights reserved.

The evolutionary significance of the Wajak skulls

NARCIS (Netherlands)

Storm, P.

1995-01-01

Ever since their description by Dubois (1920, 1922) the Wajak skulls Java) have played an important role in the discussions on the evolution of modern humans in Australasia. Because of the robust morphology of the skull, Wajak Man was seen as a link between Pleistocene hominids from Java (Solo) and

Skull base, orbits, temporal bone, and cranial nerves: anatomy on MR imaging.

Science.gov (United States)

Morani, Ajaykumar C; Ramani, Nisha S; Wesolowski, Jeffrey R

2011-08-01

Accurate delineation, diagnosis, and treatment planning of skull base lesions require knowledge of the complex anatomy of the skull base. Because the skull base cannot be directly evaluated, imaging is critical for the diagnosis and management of skull base diseases. Although computed tomography (CT) is excellent for outlining the bony detail, magnetic resonance (MR) imaging provides better soft tissue detail and is helpful for evaluating the adjacent meninges, brain parenchyma, and bone marrow of the skull base. Thus, CT and MR imaging are often used together for evaluating skull base lesions. This article focuses on the radiologic anatomy of the skull base pertinent to MR imaging evaluation. Copyright © 2011 Elsevier Inc. All rights reserved.

Positional skull deformation in infants: heading towards evidence-based practice

NARCIS (Netherlands)

van Wijk, Renske

2014-01-01

The shape of a young infant’s skull can deform as a result of prolonged external forces. The prevalence of positional skull deformation increased dramatically during the last decades. The primary aim of this dissertation was to provide a stronger evidence base for the treatment of skull deformation.

[The Base of the Skull. Rudolf Virchow between Pathology and Anthropology].

Science.gov (United States)

Seemann, Sophie

2016-01-01

Throughout his scientific career, the pathologist and anthropologist Rudolf Virchow (1821-1902) examined countless skulls, gradually changing his perspective on this object of research. Initially, he was mainly concerned with pathologically deformed skulls. From the 1850s onwards, he gradually developed a more anthropological approach, and anthropology increasingly came to dominate his scientific interest. This article shows how different influences became central for the establishment of his specific and dynamic model of the human skull development and its successful application in anthropology. Crucial for this process were Virchow's collaboration with his teacher Robert Froriep (1804-1861) in the department of pathology of the Charité, his research on cretinism and rickets, as well as his description of the base of the skull as the center of skull development. His research work was attended by and showed a reciprocal interaction with the buildup of large skull collections. This article uses Virchow's original publications on skull pathology as well as his still preserved skull specimens from the collection of the Berlin Museum of Medical History at the Charité for an integrated text and object based analysis.

Normal Brain-Skull Development with Hybrid Deformable VR Models Simulation.

Science.gov (United States)

Jin, Jing; De Ribaupierre, Sandrine; Eagleson, Roy

2016-01-01

This paper describes a simulation framework for a clinical application involving skull-brain co-development in infants, leading to a platform for craniosynostosis modeling. Craniosynostosis occurs when one or more sutures are fused early in life, resulting in an abnormal skull shape. Surgery is required to reopen the suture and reduce intracranial pressure, but is difficult without any predictive model to assist surgical planning. We aim to study normal brain-skull growth by computer simulation, which requires a head model and appropriate mathematical methods for brain and skull growth respectively. On the basis of our previous model, we further specified suture model into fibrous and cartilaginous sutures and develop algorithm for skull extension. We evaluate the resulting simulation by comparison with datasets of cases and normal growth.

A critical inventory of preoperative skull replicas.

Science.gov (United States)

Fasel, J H D; Beinemann, J; Schaller, K; Gailloud, P

2013-09-01

Physical replicas of organs are used increasingly for preoperative planning. The quality of these models is generally accepted by surgeons. In view of the strong trend towards minimally invasive and personalised surgery, however, the aim of this investigation was to assess qualitatively the accuracy of such replicas, using skull models as an example. Skull imaging was acquired for three cadavers by computed tomography using clinical routine parameters. After digital three-dimensional (3D) reconstruction, physical replicas were produced by 3D printing. The facsimilia were analysed systematically and compared with the best gold standard possible: the macerated skull itself. The skull models were far from anatomically accurate. Non-conforming rendering was observed in particular for foramina, sutures, notches, fissures, grooves, channels, tuberosities, thin-walled structures, sharp peaks and crests, and teeth. Surgeons should be aware that preoperative models may not yet render the exact anatomy of the patient under consideration and are advised to continue relying, in specific conditions, on their own analysis of the native computed tomography or magnetic resonance imaging.

Peculiarities of skull roentgenological picture during hyperparathyroid osteodystrophia

International Nuclear Information System (INIS)

Spuzyak, M.I.

1985-01-01

Results of the analysis of skull roentgenological pictures of 61 patients wih primary hyperparathyroidism are presented. All the patients were operated. Diagnosis is confirmed during the operation and histological examination. Alterations of skull are disclosed in 90% of patients

Changes of the skull in general body diseases

International Nuclear Information System (INIS)

Koval', G.Yu.; Perepust, L.A.; Novikova, Eh.Z.

1984-01-01

Changes of the skull in the following body disease are considered. Diseases: endocrine diseases, fibrous osteodystrophy, reticulohistocytoses and noninfectious granulomas, the blood system diseases, disturbance of vitamin balance. Skull roentgenograms in some above-mentioned diseases are presented and analysed

Pulse induction heating

Energy Technology Data Exchange (ETDEWEB)

Vasiliev, A S; Kachanov, B Y; Kogan, B V

1993-12-31

Induction heating and three types of pulse processes were studied. It was found that in pulse processes the frequency and pulse duration of heat treatments do not remain constant. High frequency pulse heat treatments can be used on sprayed coatings; such treatments will result in stronger surfaces with no cracks. For induction hardening, the rate of specific power was 1 to 1.5 kW/sq.cm, for forging it was 0.2 to 0.3 kW/sq.cm and for melting it was 0.05 to 0.1 kW/sq.cm. The application of pulse heating will result in higher rates of specific power.

Noble metal (NM) behavior during simulated HLLW vitrification in induction melter with cold crucible

International Nuclear Information System (INIS)

Demin, A.V.; Matyunin, Y.I.; Fedorova, M.I.

1995-01-01

The investigation of noble metal (Ru, Rh, Pd) properties in, glass melts are connected with their specific behaviors during HLLW vitrification. Ruthenium, rhodium and palladium volatilities and heterogeneous platinoid phases forming on melts are investigated in reasonable details conformably to Joule's heating ceramic melters. The vitrification conditions in melters with induction heating of melts are differ from the vitrification ones in ceramic melters on some numbers of parameters (the availability of significant temperature gradients and convection flows in melts, short time of molten mass updating in melter and probability of definite interaction between high-frequency field and melt inhomogeneities). The results of simulated HLLW solidification modelling of the vitrification process in induction melter with cold crucible to produce phosphate and boron-silicate materials are presented. The properties of received glasses and behavior of platinoids are shown to have analogies and distinctions in comparison with compounds, synthesized in ceramic melter. The structures of dispersed particles of NM heterogeneous phases forming in glass melts prepared in induction melter with cold crucible are identified. The results of investigations show, that the marked distinctions between two processes can influence (in definite degree) as on property of synthesized materials, as on behavior of platinoid during vitrifications

Leonardo da Vinci's "A Skull Sectioned" : Skull and dental formula revisited

NARCIS (Netherlands)

Gerrits, Peter O.; Veening, Jan G.

What can be learned from historical anatomical drawings and how to incorporate these drawings into anatomical teaching? The drawing A skull sectioned (RL 19058v) by Leonardo da Vinci (14521519), hides more detailed information than reported earlier. A well-chosen section cut explores sectioned

Leonardo da Vinci's "A Skull Sectioned": Skull and dental formula revisited

NARCIS (Netherlands)

Gerrits, P.O.; Veening, J.G.

2013-01-01

What can be learned from historical anatomical drawings and how to incorporate these drawings into anatomical teaching? The drawing "A skull sectioned" (RL 19058v) by Leonardo da Vinci (1452-1519), hides more detailed information than reported earlier. A well-chosen section cut explores sectioned

Skull Defects in Finite Element Head Models for Source Reconstruction from Magnetoencephalography Signals

Science.gov (United States)

Lau, Stephan; Güllmar, Daniel; Flemming, Lars; Grayden, David B.; Cook, Mark J.; Wolters, Carsten H.; Haueisen, Jens

2016-01-01

Magnetoencephalography (MEG) signals are influenced by skull defects. However, there is a lack of evidence of this influence during source reconstruction. Our objectives are to characterize errors in source reconstruction from MEG signals due to ignoring skull defects and to assess the ability of an exact finite element head model to eliminate such errors. A detailed finite element model of the head of a rabbit used in a physical experiment was constructed from magnetic resonance and co-registered computer tomography imaging that differentiated nine tissue types. Sources of the MEG measurements above intact skull and above skull defects respectively were reconstructed using a finite element model with the intact skull and one incorporating the skull defects. The forward simulation of the MEG signals reproduced the experimentally observed characteristic magnitude and topography changes due to skull defects. Sources reconstructed from measured MEG signals above intact skull matched the known physical locations and orientations. Ignoring skull defects in the head model during reconstruction displaced sources under a skull defect away from that defect. Sources next to a defect were reoriented. When skull defects, with their physical conductivity, were incorporated in the head model, the location and orientation errors were mostly eliminated. The conductivity of the skull defect material non-uniformly modulated the influence on MEG signals. We propose concrete guidelines for taking into account conducting skull defects during MEG coil placement and modeling. Exact finite element head models can improve localization of brain function, specifically after surgery. PMID:27092044

New insights into the skull of Istiodactylus latidens (Ornithocheiroidea, Pterodactyloidea.

Directory of Open Access Journals (Sweden)

Mark P Witton

Full Text Available The skull of the Cretaceous pterosaur Istiodactylus latidens, a historically important species best known for its broad muzzle of interlocking, lancet-shaped teeth, is almost completely known from the broken remains of several individuals, but the length of its jaws remains elusive. Estimates of I. latidens jaw length have been exclusively based on the incomplete skull of NHMUK R3877 and, perhaps erroneously, reconstructed by assuming continuation of its broken skull pieces as preserved in situ. Here, an overlooked jaw fragment of NHMUK R3877 is redescribed and used to revise the skull reconstruction of I. latidens. The new reconstruction suggests a much shorter skull than previously supposed, along with a relatively tall orbital region and proportionally slender maxilla, a feature documented in the early 20(th century but ignored by all skull reconstructions of this species. These features indicate that the skull of I. latidens is particularly distinctive amongst istiodactylids and suggests greater disparity between I. latidens and I. sinensis than previously appreciated. A cladistic analysis of istiodactylid pterosaurs incorporating new predicted I. latidens skull metrics suggests Istiodactylidae is constrained to five species (Liaoxipterus brachyognathus, Lonchengpterus zhoai, Nurhachius ignaciobritoi, Istiodactylus latidens and Istiodactylus sinensis defined by their distinctive dentition, but excludes the putative istiodactylids Haopterus gracilis and Hongshanopterus lacustris. Istiodactylus latidens, I. sinensis and Li. brachyognathus form an unresolved clade of derived istiodactylids, and the similarity of comparable remains of I. sinensis and Li. brachyognathus suggest further work into their taxonomy and classification is required. The new skull model of I. latidens agrees with the scavenging habits proposed for these pterosaurs, with much of their cranial anatomy converging on that of habitually scavenging birds.

New Insights into the Skull of Istiodactylus latidens (Ornithocheiroidea, Pterodactyloidea)

Science.gov (United States)

Witton, Mark P.

2012-01-01

The skull of the Cretaceous pterosaur Istiodactylus latidens, a historically important species best known for its broad muzzle of interlocking, lancet-shaped teeth, is almost completely known from the broken remains of several individuals, but the length of its jaws remains elusive. Estimates of I. latidens jaw length have been exclusively based on the incomplete skull of NHMUK R3877 and, perhaps erroneously, reconstructed by assuming continuation of its broken skull pieces as preserved in situ. Here, an overlooked jaw fragment of NHMUK R3877 is redescribed and used to revise the skull reconstruction of I. latidens. The new reconstruction suggests a much shorter skull than previously supposed, along with a relatively tall orbital region and proportionally slender maxilla, a feature documented in the early 20th century but ignored by all skull reconstructions of this species. These features indicate that the skull of I. latidens is particularly distinctive amongst istiodactylids and suggests greater disparity between I. latidens and I. sinensis than previously appreciated. A cladistic analysis of istiodactylid pterosaurs incorporating new predicted I. latidens skull metrics suggests Istiodactylidae is constrained to five species (Liaoxipterus brachyognathus, Lonchengpterus zhoai, Nurhachius ignaciobritoi, Istiodactylus latidens and Istiodactylus sinensis) defined by their distinctive dentition, but excludes the putative istiodactylids Haopterus gracilis and Hongshanopterus lacustris. Istiodactylus latidens, I. sinensis and Li. brachyognathus form an unresolved clade of derived istiodactylids, and the similarity of comparable remains of I. sinensis and Li. brachyognathus suggest further work into their taxonomy and classification is required. The new skull model of I. latidens agrees with the scavenging habits proposed for these pterosaurs, with much of their cranial anatomy converging on that of habitually scavenging birds. PMID:22470442

Prediction and near-field observation of skull-guided acoustic waves.

Science.gov (United States)

Estrada, Héctor; Rebling, Johannes; Razansky, Daniel

2017-06-21

Ultrasound waves propagating in water or soft biological tissue are strongly reflected when encountering the skull, which limits the use of ultrasound-based techniques in transcranial imaging and therapeutic applications. Current knowledge on the acoustic properties of the cranial bone is restricted to far-field observations, leaving its near-field unexplored. We report on the existence of skull-guided acoustic waves, which was herein confirmed by near-field measurements of optoacoustically-induced responses in ex-vivo murine skulls immersed in water. Dispersion of the guided waves was found to reasonably agree with the prediction of a multilayered flat plate model. We observed a skull-guided wave propagation over a lateral distance of at least 3 mm, with a half-decay length in the direction perpendicular to the skull ranging from 35 to 300 μm at 6 and 0.5 MHz, respectively. Propagation losses are mostly attributed to the heterogenous acoustic properties of the skull. It is generally anticipated that our findings may facilitate and broaden the application of ultrasound-mediated techniques in brain diagnostics and therapy.

Prediction and near-field observation of skull-guided acoustic waves

Science.gov (United States)

Estrada, Héctor; Rebling, Johannes; Razansky, Daniel

2017-06-01

Ultrasound waves propagating in water or soft biological tissue are strongly reflected when encountering the skull, which limits the use of ultrasound-based techniques in transcranial imaging and therapeutic applications. Current knowledge on the acoustic properties of the cranial bone is restricted to far-field observations, leaving its near-field unexplored. We report on the existence of skull-guided acoustic waves, which was herein confirmed by near-field measurements of optoacoustically-induced responses in ex-vivo murine skulls immersed in water. Dispersion of the guided waves was found to reasonably agree with the prediction of a multilayered flat plate model. We observed a skull-guided wave propagation over a lateral distance of at least 3 mm, with a half-decay length in the direction perpendicular to the skull ranging from 35 to 300 μm at 6 and 0.5 MHz, respectively. Propagation losses are mostly attributed to the heterogenous acoustic properties of the skull. It is generally anticipated that our findings may facilitate and broaden the application of ultrasound-mediated techniques in brain diagnostics and therapy.

Study of mastoid canals and grooves in north karnataka human skulls.

Science.gov (United States)

Hadimani, Gavishiddappa Andanappa; Bagoji, Ishwar Basavantappa

2013-08-01

This study was undertaken to observe the frequency of mastoid canals and grooves in north Karnataka dry human skulls. 100 dry human skulls of unknown age and sex from the department of Anatomy were selected and observed for the present study. The mastoid regions of dry skulls were observed for the presence of mastoid canals and grooves, if any. A metallic wire was passed through the canal for its confirmation and then the length was measured. The Mastoid canals were present in 53% of the total 100 skulls observed either bilaterally or unilaterally. Mastoid grooves were present in 18% of the total skulls (100) observed. Double mastoid canal was found in 01% of total skull studied and both Mastoid canals & Mastoid grooves together were present in 02% of the total skulls (100) observed. The knowledge of mastoid canals and grooves is very important for otolaryngologists and neurosurgeons. Because they contain an arterial branch of occipital artery with its accompanying vein which is liable to injury resulting into severe bleeding.

Chordoma of skull base presenting as nasopharyngeal mass

Directory of Open Access Journals (Sweden)

Sant Prakash Kataria

2013-01-01

Full Text Available While the nasopharynx is most commonly regarded by the otolaryngologist as a primary site of neoplastic involvement, it is also an avenue of spread of base-of-the-skull tumors presenting as bulging nasopharyngeal masses. Chordoma is a relatively rare tumor of the skull base and sacrum thought to originate from embryonic remnants of the notochord. Chordomas arising from the skull base/clivus are typically locally aggressive with lytic bone destruction. The optimal treatment may be photon/proton radiotherapy alone or combined with a gross total resection, when feasible. We report a case of intracranial chordoma presenting as nasopharyngeal mass.

Open Approaches to the Anterior Skull Base in Children: Review of the Literature.

Science.gov (United States)

Wasserzug, Oshri; DeRowe, Ari; Ringel, Barak; Fishman, Gadi; Fliss, Dan M

2018-02-01

Introduction  Skull base lesions in children and adolescents are rare, and comprise only 5.6% of all skull base surgery. Anterior skull base lesions dominate, averaging slightly more than 50% of the cases. Until recently, surgery of the anterior skull base was dominated by open procedures and endoscopic skull base surgery was reserved for benign pathologies. Endoscopic skull base surgery is gradually gaining popularity. In spite of that, open skull base surgery is still considered the "gold standard" for the treatment of anterior skull base lesions, and it is the preferred approach in selected cases. Objective  This article reviews current concepts and open approaches to the anterior skull base in children in the era of endoscopic surgery. Materials and Methods  Comprehensive literature review. Results  Extensive intracranial-intradural invasion, extensive orbital invasion, encasement of the optic nerve or the internal carotid artery, lateral supraorbital dural involvement and involvement of the anterior table of the frontal sinus or lateral portion of the frontal sinus precludes endoscopic surgery, and mandates open skull base surgery. The open approaches which are used most frequently for surgical resection of anterior skull base tumors are the transfacial/transmaxillary, subcranial, and subfrontal approaches. Reconstruction of anterior skull base defects is discussed in a separate article in this supplement. Discussion  Although endoscopic skull base surgery in children is gaining popularity in developed countries, in many cases open surgery is still required. In addition, in developing countries, which accounts for more than 80% of the world's population, limited access to expensive equipment precludes the use of endoscopic surgery. Several open surgical approaches are still employed to resect anterior skull base lesions in the pediatric population. With this large armamentarium of surgical approaches, tailoring the most suitable approach to a

Basilar skull fracture in a Thoroughbred colt: Radiography or computed tomography?

Directory of Open Access Journals (Sweden)

Chee Kin Lim

2013-04-01

Full Text Available A two-year-old Thoroughbred colt was presented to the Equine Clinic, Onderstepoort Veterinary Academic Hospital for head trauma after rearing and falling backwards, hitting his head on the ground. Following medical therapy for acute onset neurological impairment secondary to a suspected basilar skull fracture, the horse was anaesthetised and computed tomography of the skull was performed. A diagnosis of a comminuted basilar skull fracture was made and skull radiographs were taken for comparison. The horse was subsequently euthanased owing to the poor prognosis; necropsy findings were compatible with imaging findings. The value and limitation of computed tomography versus radiography for the diagnosis of basilar skull fracture are discussed in this report. Introduction

Basilar skull fracture in a Thoroughbred colt: Radiography or computed tomography?

Directory of Open Access Journals (Sweden)

Chee Kin Lim

2013-04-01

Full Text Available A two-year-old Thoroughbred colt was presented to the Equine Clinic, Onderstepoort Veterinary Academic Hospital for head trauma after rearing and falling backwards, hitting his head on the ground. Following medical therapy for acute onset neurological impairment secondary to a suspected basilar skull fracture, the horse was anaesthetised and computed tomography of the skull was performed. A diagnosis of a comminuted basilar skull fracture was made and skull radiographs were taken for comparison. The horse was subsequently euthanased owing to the poor prognosis; necropsy findings were compatible with imaging findings. The value and limitation of computed tomography versus radiography for the diagnosis of basilar skull fracture are discussed in this report.

The relationship between skull asymmetry and CT findings

International Nuclear Information System (INIS)

Yamori, Yuriko; Yuge, Mariko; Kanda, Toyoko; Ashida, Hiromi; Fukase, Hiroshi

1987-01-01

In order to clarify the relationship between brain damage and skull asymmetry or supine head position preference, we classified CT findings of 330 cases with cerebral palsy or risk of motor disturbance into 6 groups according to skull shape. Those were severe (I, n = 37) and mild (II, n = 114) grades in the right occipital flatness, severe (III, n = 34) and mild (IV, n = 58) grades in the left occipital flatness, long skull with temporal flatness (V, n = 33) and symmetric round skull (control, n = 54). It was considered that the asymmetry of cortical atrophy in appearance was formed physicaly by skull asymmetry but that the asymmetric dilatation in appearance of lateral ventricle was related to the asymmetry of brain damage. The severity and the asymmetry of brain damage were tend to increase the grade of skull asymmetry. The incidence of cases with the right occipital flatness was 1.6 times more frequently than the left sided. The incidence of cases whose left (lateral) ventricle was larger than the right was 4.1 times more than the cases whose right ventricle was larger than the left. The cases with occipital flatness in the contralateral side of the larger lateral ventricle were found more than the cases with occipital flatness in the ipsilateral side of the larger ventricle, that is to say, the direction of supine head position preference during early infant was suspected to be the more severely disturbed side of body. These results suggest that the supine head position preference to the right in newborn babies and infants with scoliosis or cerebral palsy might be the result of transient or permanent asymmetric (left > right) brain dysfunction. (author)

Gender differences in D-aspartic acid content in skull bone.

Science.gov (United States)

Torikoshi-Hatano, Aiko; Namera, Akira; Shiraishi, Hiroaki; Arima, Yousuke; Toubou, Hirokazu; Ezaki, Jiro; Morikawa, Masami; Nagao, Masataka

2012-12-01

In forensic medicine, the personal identification of cadavers is one of the most important tasks. One method of estimating age at death relies on the high correlation between racemization rates in teeth and actual age, and this method has been applied successfully in forensic odontology for several years. In this study, we attempt to facilitate the analysis of racemized amino acids and examine the determination of age at death on the basis of the extent of aspartic acid (Asp) racemization in skull bones. The specimens were obtained from 61 human skull bones (19 females and 42 males) that underwent judicial autopsy from October 2010 to May 2012. The amount of D-Asp and L-Asp, total protein, osteocalcin, and collagen I in the skull bones was measured. Logistic regression analysis was performed for age, sex, and each measured protein. The amount of D-Asp in the female skull bones was significantly different from that in the male skull bones (p = 0.021), whereas the amount of L-Asp was similar. Thus, our study indicates that the amount of D-Asp in skull bones is different between the sexes.

Bone scintigraphy in lesions of the skull

International Nuclear Information System (INIS)

Fischer, M.; Wasilewski, A.; Deitmer, T.

1982-01-01

The value of 3-phase-scintigraphy in bone lesions of the skull with a new seeking agent 99mTc-2,3-dicarboxypropane-1,1-diphosphonic acid (DPD) is studied. A high soft tissue-bone-ratio of DPD is emphasized. For this reason DPD is used for bone scintigraphy of the skull, because the mass of soft tissue in relation to bone is high and a higher clearance improves the interpretation of the images of the first two phases. An increased tracer uptake is found for skeletal neoplasms (malignant and benign lesions) and for acute osteomyelitis. By contrast, the chronic inflammatory bone lesions showed normal tracer uptake. This new bone seeking agent allows to localize and differentiate tumorous or acute inflammatory lesions and chronic inflammatory bone lesions of the skull

Automatic Sex Determination of Skulls Based on a Statistical Shape Model

Directory of Open Access Journals (Sweden)

Li Luo

2013-01-01

Full Text Available Sex determination from skeletons is an important research subject in forensic medicine. Previous skeletal sex assessments are through subjective visual analysis by anthropologists or metric analysis of sexually dimorphic features. In this work, we present an automatic sex determination method for 3D digital skulls, in which a statistical shape model for skulls is constructed, which projects the high-dimensional skull data into a low-dimensional shape space, and Fisher discriminant analysis is used to classify skulls in the shape space. This method combines the advantages of metrical and morphological methods. It is easy to use without professional qualification and tedious manual measurement. With a group of Chinese skulls including 127 males and 81 females, we choose 92 males and 58 females to establish the discriminant model and validate the model with the other skulls. The correct rate is 95.7% and 91.4% for females and males, respectively. Leave-one-out test also shows that the method has a high accuracy.

Can skull form predict the shape of the temporomandibular joint? A study using geometric morphometrics on the skulls of wolves and domestic dogs.

Science.gov (United States)

Curth, Stefan; Fischer, Martin S; Kupczik, Kornelius

2017-11-01

The temporomandibular joint (TMJ) conducts and restrains masticatory movements between the mammalian cranium and the mandible. Through this functional integration, TMJ morphology in wild mammals is strongly correlated with diet, resulting in a wide range of TMJ variations. However, in artificially selected and closely related domestic dogs, dietary specialisations between breeds can be ruled out as a diversifying factor although they display an enormous variation in TMJ morphology. This raises the question of the origin of this variation. Here we hypothesise that, even in the face of reduced functional demands, TMJ shape in dogs can be predicted by skull form; i.e. that the TMJ is still highly integrated in the dog skull. If true, TMJ variation in the dog would be a plain by-product of the enormous cranial variation in dogs and its genetic causes. We addressed this hypothesis using geometric morphometry on a data set of 214 dog and 60 wolf skulls. We digitized 53 three-dimensional landmarks of the skull and the TMJ on CT-based segmentations and compared (1) the variation between domestic dog and wolf TMJs (via principal component analysis) and (2) the pattern of covariation of skull size, flexion and rostrum length with TMJ shape (via regression of centroid size on shape and partial least squares analyses). We show that the TMJ in domestic dogs is significantly more diverse than in wolves: its shape covaries significantly with skull size, flexion and rostrum proportions in patterns which resemble those observed in primates. Similar patterns in canids, which are carnivorous, and primates, which are mostly frugivorous imply the existence of basic TMJ integration patterns which are independent of dietary adaptations. However, only limited amounts of TMJ variation in dogs can be explained by simple covariation with overall skull geometry. This implies that the final TMJ shape is gained partially independently of the rest of the skull. Copyright © 2017 Elsevier Gmb

Hand in glove: brain and skull in development and dysmorphogenesis

Science.gov (United States)

Flaherty, Kevin

2013-01-01

The brain originates relatively early in development from differentiated ectoderm that forms a hollow tube and takes on an exceedingly complex shape with development. The skull is made up of individual bony elements that form from neural crest- and mesoderm-derived mesenchyme that unite to provide support and protection for soft tissues and spaces of the head. The meninges provide a protective and permeable membrane between brain and skull. Across evolutionary and developmental time, dynamic changes in brain and skull shape track one another so that their integration is evidenced in two structures that fit soundly regardless of changes in biomechanical and physiologic functions. Evidence for this tight correspondence is also seen in diseases of the craniofacial complex that are often classified as diseases of the skull (e.g., craniosynostosis) or diseases of the brain (e.g., holoprosencephaly) even when both tissues are affected. Our review suggests a model that links brain and skull morphogenesis through coordinated integration of signaling pathways (e.g., FGF, TGFβ, Wnt) via processes that are not currently understood, perhaps involving the meninges. Differences in the earliest signaling of biological structure establish divergent designs that will be enhanced during morphogenesis. Signaling systems that pattern the developing brain are also active in patterning required for growth and assembly of the skull and some members of these signaling families have been indicated as causal for craniofacial diseases. Because cells of early brain and skull are sensitive to similar signaling families, variation in the strength or timing of signals or shifts in patterning boundaries that affect one system (neural or skull) could also affect the other system and appropriate co-adjustments in development would be made. Interactions of these signaling systems and of the tissues that they pattern are fundamental to the consistent but labile functional and structural association

Flip-avoiding interpolating surface registration for skull reconstruction.

Science.gov (United States)

Xie, Shudong; Leow, Wee Kheng; Lee, Hanjing; Lim, Thiam Chye

2018-03-30

Skull reconstruction is an important and challenging task in craniofacial surgery planning, forensic investigation and anthropological studies. Existing methods typically reconstruct approximating surfaces that regard corresponding points on the target skull as soft constraints, thus incurring non-zero error even for non-defective parts and high overall reconstruction error. This paper proposes a novel geometric reconstruction method that non-rigidly registers an interpolating reference surface that regards corresponding target points as hard constraints, thus achieving low reconstruction error. To overcome the shortcoming of interpolating a surface, a flip-avoiding method is used to detect and exclude conflicting hard constraints that would otherwise cause surface patches to flip and self-intersect. Comprehensive test results show that our method is more accurate and robust than existing skull reconstruction methods. By incorporating symmetry constraints, it can produce more symmetric and normal results than other methods in reconstructing defective skulls with a large number of defects. It is robust against severe outliers such as radiation artifacts in computed tomography due to dental implants. In addition, test results also show that our method outperforms thin-plate spline for model resampling, which enables the active shape model to yield more accurate reconstruction results. As the reconstruction accuracy of defective parts varies with the use of different reference models, we also study the implication of reference model selection for skull reconstruction. Copyright © 2018 John Wiley & Sons, Ltd.

Segmentation, surface rendering, and surface simplification of 3-D skull images for the repair of a large skull defect

Science.gov (United States)

Wan, Weibing; Shi, Pengfei; Li, Shuguang

2009-10-01

Given the potential demonstrated by research into bone-tissue engineering, the use of medical image data for the rapid prototyping (RP) of scaffolds is a subject worthy of research. Computer-aided design and manufacture and medical imaging have created new possibilities for RP. Accurate and efficient design and fabrication of anatomic models is critical to these applications. We explore the application of RP computational methods to the repair of a pediatric skull defect. The focus of this study is the segmentation of the defect region seen in computerized tomography (CT) slice images of this patient's skull and the three-dimensional (3-D) surface rendering of the patient's CT-scan data. We see if our segmentation and surface rendering software can improve the generation of an implant model to fill a skull defect.

Does skull morphology constrain bone ornamentation? A morphometric analysis in the Crocodylia.

Science.gov (United States)

Clarac, F; Souter, T; Cubo, J; de Buffrénil, V; Brochu, C; Cornette, R

2016-08-01

Previous quantitative assessments of the crocodylians' dermal bone ornamentation (this ornamentation consists of pits and ridges) has shown that bone sculpture results in a gain in area that differs between anatomical regions: it tends to be higher on the skull table than on the snout. Therefore, a comparative phylogenetic analysis within 17 adult crocodylian specimens representative of the morphological diversity of the 24 extant species has been performed, in order to test if the gain in area due to ornamentation depends on the skull morphology, i.e. shape and size. Quantitative assessment of skull size and shape through geometric morphometrics, and of skull ornamentation through surface analyses, produced a dataset that was analyzed using phylogenetic least-squares regression. The analyses reveal that none of the variables that quantify ornamentation, be they on the snout or the skull table, is correlated with the size of the specimens. Conversely, there is more disparity in the relationships between skull conformations (longirostrine vs. brevirostrine) and ornamentation. Indeed, both parameters GApit (i.e. pit depth and shape) and OArelat (i.e. relative area of the pit set) are negatively correlated with snout elongation, whereas none of the values quantifying ornamentation on the skull table is correlated with skull conformation. It can be concluded that bone sculpture on the snout is influenced by different developmental constrains than on the skull table and is sensible to differences in the local growth 'context' (allometric processes) prevailing in distinct skull parts. Whatever the functional role of bone ornamentation on the skull, if any, it seems to be restricted to some anatomical regions at least for the longirostrine forms that tend to lose ornamentation on the snout. © 2016 Anatomical Society.

Case of pycnodysostosis. Observation of skull by CT scan

Energy Technology Data Exchange (ETDEWEB)

Anegawa, Shigetaka; Bekki, Yoshiaki; Furukawa, Yasuhiro; Yokota, Seishi; Torigoe, Ryuichiro

1987-07-01

A 13-year-old boy was presented to the Department of Neurosurgery, Saiseikai Fukuoka General Hospital for further examinations concerning abnormal findings in the skull radiogram taken when he struck his head. His physical features showed some characteristics the same as those of pycnodysostosis as follows - proportionate dwarfism, prominent forehead, short spoon-shaped fingers, bilateral exophthalmos. A skull radiogram revealed widely open cranial sutures with no healing of the fracture and craniotomy which was performed for an acute epidural hematoma 6 years ago. Furthermore, the mandible was hypoplastic with a virtural loss of mandibular angle. CT of the soft tissues showed somewhat dilated cortical sulci and ventricles without any structural abnormalities in the brain. CT of bone algorythum revealed specific characteristics of this disease. The paranasal sinuses were quite hypoplastic. Especially in the maxillary sinuses, frontal sinussus and mastoid air cells, none of developments of sinuses were noted, even though the middle and internal ear seemed to be normal. Moreover, the ethomoid and sphenoid sinuses were noted, although their developments were poor. The appearance of skull base was normal, including the inlets and outlets of cranial nerves or vessels and synchondroses. However, the density of the skull base, especially in the diploe, was higher than normal in Hansfield number. Furthermore, detailed measurements of skull base demonstrated that the skull base itself was also dwarfish. In our study, the development of sinuses in bones with intramembranous ossification are worse than that with endochondral ossification. Furthermore, sutures or synchondroses in the skull base were well-developed than those of the convex. So, it is considered that pycnodysostosis must be the neighboring entity of diseases such as achondroplastic dwarfism or cleidocranial dysplasia. (J.P.N.).

Robotic Anterior and Midline Skull Base Surgery: Preclinical Investigations

International Nuclear Information System (INIS)

O'Malley, Bert W.; Weinstein, Gregory S.

2007-01-01

Purpose: To develop a minimally invasive surgical technique to access the midline and anterior skull base using the optical and technical advantages of robotic surgical instrumentation. Methods and Materials: Ten experimental procedures focusing on approaches to the nasopharynx, clivus, sphenoid, pituitary sella, and suprasellar regions were performed on one cadaver and one live mongrel dog. Both the cadaver and canine procedures were performed in an approved training facility using the da Vinci Surgical Robot. For the canine experiments, a transoral robotic surgery (TORS) approach was used, and for the cadaver a newly developed combined cervical-transoral robotic surgery (C-TORS) approach was investigated and compared with standard TORS. The ability to access and dissect tissues within the various areas of the midline and anterior skull base were evaluated, and techniques to enhance visualization and instrumentation were developed. Results: Standard TORS approaches did not provide adequate access to the midline and anterior skull base; however, the newly developed C-TORS approach was successful in providing the surgical access to these regions of the skull base. Conclusion: Robotic surgery is an exciting minimally invasive approach to the skull base that warrants continued preclinical investigation and development

Imaging of the skull base anatomy; Schnittbildanatomie der Schaedelbasis

Energy Technology Data Exchange (ETDEWEB)

Wuest, Wolfgang; Uder, Michael; Lell, Michael [Erlangen-Nuernberg Univ., Universitaetsklinikum (Germany). Radiologisches Institut

2016-09-15

The skull base divides the extracranial from the intracranial compartment and contains a multiplicity of bony and soft tissue structures. For evaluating the skull base profound knowledge of the complex anatomy is mandatory. To limit the number of differential diagnosis it is important to be familiar with the contents of the different compartments. Due to the technical progress and the difficulty in assessing the skull base clinically imaging plays a significant role in diagnosis. For imaging both MRI and CT are used, which represent not competing but complementary methods.

The ontogenetic origins of skull shape disparity in the Triturus cristatus group.

Science.gov (United States)

Cvijanović, Milena; Ivanović, Ana; Kalezić, Miloš L; Zelditch, Miriam L

2014-09-01

Comparative studies of ontogenies of closely related species provide insights into the mechanisms responsible for morphological diversification. Using geometric morphometrics, we investigated the ontogenetic dynamics of postlarval skull shape and disparity in three closely related crested newt species. The skull shapes of juveniles just after metamorphosis (hereafter metamorphs) and adult individuals were sampled by landmark configurations that describe the shape of the dorsal and ventral side of the newt skull, and analyzed separately. The three species differ in skull size and shape in metamorphs and adults. The ontogenies of dorsal and ventral skull differ in the orientation but not lengths of the ontogenetic trajectories. The disparity of dorsal skull shape increases over ontogeny, but that of ventral skull shape does not. Thus, modifications of ontogenetic trajectories can, but need not, increase the disparity of shape. In species with biphasic life-cycles, when ontogenetic trajectories for one stage can be decoupled from those of another, increases and decreases in disparity are feasible, but our results show that they need not occur. © 2014 Wiley Periodicals, Inc.

A small skull from Flores dated to the 20th century

DEFF Research Database (Denmark)

Villa, Chiara; Persson, Liselott; Alexandersen, Verner

2012-01-01

A human skull with mandible from the Ngada District on the island of Flores, Indonesia, is described in order to contribute to the knowledge of variation in cranial architecture, which is important in interpretations of evolutionary cerebralisation. The skull was excavated in 1924 and sent...... to the National Museum in Copenhagen. The "Copenhagen Flores" (CF) male skull is radiocarbon-dated and of modern age. The cranium is small, but larger than e.g. Liang Bua skull (LB1) in every measurement. The (CT-scan based) cranial capacity of 1258 ml is normal for modern humans, but somewhat lower than values...

Modified three-dimensional skull base model with artificial dura mater, cranial nerves, and venous sinuses for training in skull base surgery: technical note.

Science.gov (United States)

Mori, Kentaro; Yamamoto, Takuji; Oyama, Kazutaka; Ueno, Hideaki; Nakao, Yasuaki; Honma, Keiichirou

2008-12-01

Experience with dissection of the cavernous sinus and the temporal bone is essential for training in skull base surgery, but the opportunities for cadaver dissection are very limited. A modification of a commercially available prototype three-dimensional (3D) skull base model, made by a selective laser sintering method and incorporating surface details and inner bony structures such as the inner ear structures and air cells, is proposed to include artificial dura mater, cranial nerves, venous sinuses, and the internal carotid artery for such surgical training. The transpetrosal approach and epidural cavernous sinus surgery (Dolenc's technique) were performed on this modified model using a high speed drill or ultrasonic bone curette under an operating microscope. The model could be dissected in almost the same way as a real cadaver. The modified 3D skull base model provides a good educational tool for training in skull base surgery.

Imaging diagnosis of Granulocytic Sarcoma in the skull base

International Nuclear Information System (INIS)

Zheng Shaoyan; Xie Jiming; Yang Zhiyun; Zhou Zhou; Li Shurong

2010-01-01

Objective: To improve the understanding and imaging diagnosis of granulocytic sarcoma in the skull base. Methods: Three cases of granulocytic sarcomas in the skull base are reported. The clinical features and imaging findings were analyzed. Results: The three cases occurred in children with acute myeloid leukemia. Two patients presented with oculomotor paralysis before the diagnosis of leukemia, the third patient with history of leukemia presented with headache. Diffuse infiltration of basal skull bone marrow and extracranial soft tissue masses were shown on MRI. The signal intensities of the masses were similar to that of gray matter on T 1 WI and T 2 WI with marked contrast enhancement. The soft tissue masses were located in the para-sellar region and surrounded the lateral wall of the maxillary sinus in one case. The soft tissue mass of the second case infiltrated the orbital cavity, cavernous sinus and oculomotor nerve. Tumor infiltrating the meninges, cranial nerves and paranasal sinuses was seen in the third patient. Conclusion: Cranial nerve paralysis can be the presenting symptom of basal skull granulocytic sarcoma in children. Granulocytic sarcoma should be considered in the different diagnosis when diffuse abnormal signal intensities in the basal skull bone marrow with solitary or multiple soft tissue masses are shown on MRI. (authors)

Contributions to the functional morphology of caudate skulls: kinetic and akinetic forms

Directory of Open Access Journals (Sweden)

Nikolay Natchev

2016-09-01

Full Text Available A strongly ossified and rigid skull roof, which prevents parietal kinesis, has been reported for the adults of all amphibian clades. Our μ-CT investigations revealed that the Buresch’s newt (Triturus ivanbureschi possess a peculiar cranial construction. In addition to the typical amphibian pleurokinetic articulation between skull roof and palatoquadrate associated structures, we found flexible connections between nasals and frontals (prokinesis, vomer and parasphenoid (palatokinesis, and between frontals and parietals (mesokinesis. This is the first description of mesokinesis in urodelans. The construction of the skull in the Buresch’s newts also indicates the presence of an articulation between parietals and the exocipitals, discussed as a possible kind of metakinesis. The specific combination of pleuro-, pro-, meso-, palato-, and metakinetic skull articulations indicate to a new kind of kinetic systems unknown for urodelans to this date. We discuss the possible neotenic origin of the skull kinesis and pose the hypothesis that the kinesis in T. ivanbureschi increases the efficiency of fast jaw closure. For that, we compared the construction of the skull in T. ivanbureschi to the akinetic skull of the Common fire salamander Salamandra salamandra. We hypothesize that the design of the skull in the purely terrestrial living salamander shows a similar degree of intracranial mobility. However, this mobility is permitted by elasticity of some bones and not by true articulation between them. We comment on the possible relation between the skull construction and the form of prey shaking mechanism that the species apply to immobilize their victims.

Single-layer skull approximations perform well in transcranial direct current stimulation modeling

NARCIS (Netherlands)

Rampersad, S.M.; Stegeman, D.F.; Oostendorp, T.F.

2013-01-01

In modeling the effect of transcranial direct current stimulation, the representation of the skull is an important factor. In a spherical model, we compared a realistic skull modeling approach, in which the skull consisted of three isotropic layers, to anisotropic and isotropic single-layer

Coexistence of Wormian Bones With Metopism, and Vice Versa, in Adult Skulls.

Science.gov (United States)

Cirpan, Sibel; Aksu, Funda; Mas, Nuket; Magden, Abdurrahman Orhan

2016-03-01

The aim of the study is to investigate coexistence of Wormian bones with metopism, and vice versa, in adult skulls. A total of 160 dry adult human skulls of unknown sex and ages were randomly selected from the Gross Anatomy Laboratory of Medical School of Dokuz Eylul University. The skulls were examined for presence of metopism, Wormian bones (WB), and coexistence of WBs with metopism and vice versa. Topographic distribution of the WBs was macroscopically evaluated within the skulls including metopism. The photographs were being taken with Canon 400B (55 mm objective). The frequency of metopism and WBs in 160 skulls is 7.50% (12/160) and 59.3% (95/160), respectively, P coexistence of WBs with metopism was found as 11 of 12 skulls (91.66%), whereas the incidence of coexistence of metopism with WBs was found as 11 of 95 skulls (11.58%), P coexistence of WBs with metopism (11/12, 91.66%) and coexistence of metopism with WBs (11/95, 11.58%). The factors leading to metopism may also lead to WBs, whereas that the factors leading to WBs may not lead to metopism.

The copper-beaten skull | Mahomed | SA Journal of Radiology

African Journals Online (AJOL)

The copper-beaten skull appearance is typically associated with craniosynostosis, where premature fusion of the cranial bone sutures results in the growing brain exerting pressure on the malleable cranium, producing a pattern known as the copper-beaten skull appearance. SA JOURNAL OF RADIOLOGY • February 2012 ...

Effects of the murine skull in optoacoustic brain microscopy.

Science.gov (United States)

Kneipp, Moritz; Turner, Jake; Estrada, Héctor; Rebling, Johannes; Shoham, Shy; Razansky, Daniel

2016-01-01

Despite the great promise behind the recent introduction of optoacoustic technology into the arsenal of small-animal neuroimaging methods, a variety of acoustic and light-related effects introduced by adult murine skull severely compromise the performance of optoacoustics in transcranial imaging. As a result, high-resolution noninvasive optoacoustic microscopy studies are still limited to a thin layer of pial microvasculature, which can be effectively resolved by tight focusing of the excitation light. We examined a range of distortions introduced by an adult murine skull in transcranial optoacoustic imaging under both acoustically- and optically-determined resolution scenarios. It is shown that strong low-pass filtering characteristics of the skull may significantly deteriorate the achievable spatial resolution in deep brain imaging where no light focusing is possible. While only brain vasculature with a diameter larger than 60 µm was effectively resolved via transcranial measurements with acoustic resolution, significant improvements are seen through cranial windows and thinned skull experiments. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A statistical skull geometry model for children 0-3 years old.

Directory of Open Access Journals (Sweden)

Zhigang Li

Full Text Available Head injury is the leading cause of fatality and long-term disability for children. Pediatric heads change rapidly in both size and shape during growth, especially for children under 3 years old (YO. To accurately assess the head injury risks for children, it is necessary to understand the geometry of the pediatric head and how morphologic features influence injury causation within the 0-3 YO population. In this study, head CT scans from fifty-six 0-3 YO children were used to develop a statistical model of pediatric skull geometry. Geometric features important for injury prediction, including skull size and shape, skull thickness and suture width, along with their variations among the sample population, were quantified through a series of image and statistical analyses. The size and shape of the pediatric skull change significantly with age and head circumference. The skull thickness and suture width vary with age, head circumference and location, which will have important effects on skull stiffness and injury prediction. The statistical geometry model developed in this study can provide a geometrical basis for future development of child anthropomorphic test devices and pediatric head finite element models.

A statistical skull geometry model for children 0-3 years old.

Science.gov (United States)

Li, Zhigang; Park, Byoung-Keon; Liu, Weiguo; Zhang, Jinhuan; Reed, Matthew P; Rupp, Jonathan D; Hoff, Carrie N; Hu, Jingwen

2015-01-01

Head injury is the leading cause of fatality and long-term disability for children. Pediatric heads change rapidly in both size and shape during growth, especially for children under 3 years old (YO). To accurately assess the head injury risks for children, it is necessary to understand the geometry of the pediatric head and how morphologic features influence injury causation within the 0-3 YO population. In this study, head CT scans from fifty-six 0-3 YO children were used to develop a statistical model of pediatric skull geometry. Geometric features important for injury prediction, including skull size and shape, skull thickness and suture width, along with their variations among the sample population, were quantified through a series of image and statistical analyses. The size and shape of the pediatric skull change significantly with age and head circumference. The skull thickness and suture width vary with age, head circumference and location, which will have important effects on skull stiffness and injury prediction. The statistical geometry model developed in this study can provide a geometrical basis for future development of child anthropomorphic test devices and pediatric head finite element models.

The skull of Chios: trepanation in Hippocratic medicine.

Science.gov (United States)

Tsermoulas, Georgios; Aidonis, Asterios; Flint, Graham

2014-08-01

Cranial trepanation is the oldest neurosurgical operation and its roots date back to prehistory. For many centuries, religion and mysticism were strongly linked to the cause of diseases, and trepanation was associated with superstitions such as releasing evil spirits from inside the skull. The Hippocratic treatise "On injuries of the head" was therefore a revolutionary work, as it presented a systematic approach to the management of cranial trauma, one that was devoid of spiritual elements. Unfortunately, there are only a limited number of skeletal findings that confirm that the practice of trepanation was performed as part of Hippocratic medicine. In this historical vignette, the authors present a trepanned skull that was found in Chios, Greece, as evidence of the procedure having been performed in accordance with the Hippocratic teaching. The skull bears a parietal bur hole in association with a linear fracture, and it is clear that the patient survived the procedure. In this analysis, the authors examine the application of the original Hippocratic teaching to the skull of Chios. The rationalization of trepanation was clearly a significant achievement in the evolution of neurosurgery.

Radiological skull diagnosing - questions of the neurosurgeon to the radiologist

International Nuclear Information System (INIS)

Fahlbusch, R.; Hamburger, C.; Ringel, K.

1982-01-01

A well-adjusted overall picture of the skull is very important to the neurosurgeon for diagnosis and therapy. Without an overall picture of the skull the neurosurgeon is hardly likely to begin a trepanation. There are, however, still same questions open in radiological diagnostics. A solution of the problem might be offered soon by computerized radiography which might even replace the conventional X-ray examination of the skull. The radiological CT-total skeletal examination of polytraumatised patients, which can be carried out in 30 seconds by modern CT equipment makes it possible to also obtain overall pictures of the skull and the upper cervical vertebral column. An advantage in addition to the fast information is the significant reduction of the radiation exposure in comparison to conventional methods. (orig./APR) [de

Treatment experience of surgical repair for long-term skull defect

Directory of Open Access Journals (Sweden)

Shou-cheng FAN

2015-12-01

Full Text Available Retrospective analysis was performed on 30 patients of skull defect who underwent surgical repair. Intraoperative and postoperative curative effect was evaluated on those patients, and the results showed that the incidence rate of intraoperative dura mater defect (P = 0.001, early postoperative complications [new epilepsy (P = 0.035 and effusion (P = 0.021] and late postoperative complications [foreign body sensation (P = 0.035 and dizziness and headache (P = 0.050] in long-term skull defect group were all higher than those in control group. In conclusion, surgical repair of long-term skull defect incurring high risk and various complications will not be an ideal management. Therefore, early surgical treatment for skull defect is suggested. DOI: 10.3969/j.issn.1672-6731.2015.12.016

Radiologic assessment of maxillofacial, mandibular, and skull base trauma

International Nuclear Information System (INIS)

Schuknecht, Bernhard; Graetz, Klaus

2005-01-01

Cranio-maxillofacial injuries affect a significant proportion of trauma patients either in isolation or concurring with other serious injuries. Contrary to maxillofacial injuries that result from a direct impact, central skull base and lateral skull base (petrous bone) fractures usually are caused by a lateral or sagittal directed force to the skull and therefore are indirect fractures. The traditional strong role of conventional images in patients with isolated trauma to the viscerocranium is decreasing. Spiral multislice CT is progressively replacing the panoramic radiograph, Waters view, and axial films for maxillofacial trauma, and is increasingly being performed in addition to conventional films to detail and classify trauma to the mandible as well. Imaging thus contributes to accurately categorizing mandibular fractures based on location, into alveolar, mandibular proper, and condylar fractures - the last are subdivided into intracapsular and extracapsular fractures. In the midface, CT facilitates attribution of trauma to the categories central, lateral, or combined centrolateral fractures. The last frequently encompass orbital trauma as well. CT is the imaging technique of choice to display the multiplicity of fragments, the degree of dislocation and rotation, or skull base involvement. Transsphenoid skull base fractures are classified into transverse and oblique types; lateral base (temporal bone) trauma is subdivided into longitudinal and transverse fractures. Supplementary MR examinations are required when a cranial nerve palsy occurs in order to recognize neural compression. Early and late complications of trauma related to the orbit, anterior cranial fossa, or lateral skull base due to infection, brain concussion, or herniation require CT to visualize the osseous prerequisites of complications, and MR to define the adjacent brain and soft tissue involvement. (orig.)

Epigenetic control of skull morphogenesis by histone deacetylase 8

Science.gov (United States)

Haberland, Michael; Mokalled, Mayssa H.; Montgomery, Rusty L.; Olson, Eric N.

2009-01-01

Histone deacetylases (Hdacs) are transcriptional repressors with crucial roles in mammalian development. Here we provide evidence that Hdac8 specifically controls patterning of the skull by repressing a subset of transcription factors in cranial neural crest cells. Global deletion of Hdac8 in mice leads to perinatal lethality due to skull instability, and this is phenocopied by conditional deletion of Hdac8 in cranial neural crest cells. Hdac8 specifically represses the aberrant expression of homeobox transcription factors such as Otx2 and Lhx1. These findings reveal how the identity and patterning of vertebrate-specific portions of the skull are epigenetically controlled by a histone deacetylase. PMID:19605684

Effects of slag composition and process variables on decontamination of metallic wastes by melt refining

International Nuclear Information System (INIS)

Heshmatpour, B.; Copeland, G.L.

1981-01-01

Melt refining has been suggested as an alternative for decontamination and volume reduction of low-level-contaminated metallic wastes. Knowledge of metallurgical and thermochemical aspects of the process is essential for effective treatment of various metals. Variables such as slag type and composition, melting technique, and refractory materials need to be identified for each metal or alloy. Samples of contaminated metals were melted with fluxes by resistance furnace or induction heating. The resulting ingots as well as the slags were analyzed for their nuclide contents, and the corresponding partition ratios were calculated. Compatibility of slags and refractories was also investigated, and proper refractory materials were identified. Resistance furnace melting appeared to be a better melting technique for nonferrous scrap, while induction melting was more suitable for ferrous metals. In general uranium contents of the metals, except for aluminum, could be reduced to as low as 0.01 to 0.1 ppM by melt refining. Aluminum could be decontaminated to about 1 to 2 ppM U when certain fluoride slags were used. The extent of decontamination was not very sensitive to slag type and composition. However, borosilicate and basic oxidizing slags were more effective on ferrous metals and Cu; NaNO 3 -NaCl-NaOH type fluxes were desirable for Zn, Pb, and Sn; and fluoride type slags were effective for decontamination of Al. Recrystallized alumina proved to be the most compatible refractory for melt refining both ferrous and nonferrous metals, while graphite was suitable for nonferrous metal processing. In conclusion, melt refining is an effective technique for volume reduction ad decontamination of contaminated metal scrap when proper slags, melting technique, and refractories are used

Bilaterally symmetric Fourier approximations of the skull outlines of ...

Indian Academy of Sciences (India)

Present work illustrates a scheme of quantitative description of the shape of the skull outlines of temnospondyl amphibians using bilaterally symmetric closed Fourier curves. Some special points have been identified on the Fourier fits of the skull outlines, which are the local maxima, or minima of the distances from the ...

Frequency of extradural haematoma in patients with linear skull fracture

International Nuclear Information System (INIS)

Aurangzeb, A.; Afridi, E.A.K.; Khan, S.A.

2015-01-01

Apparently normal looking patients after traumatic brain injury can have serious neurological deterioration, and one of the common causes of such deterioration is extradural haematomas. This study was conducted to determine the frequency of extradural hematoma and common types of trauma leading to it among patients presenting with skull fracture due to head injury. Methods: This cross-sectional study was conducted in the department of Neurosurgery Ayub Medical College, Abbottabad from June 2011 to June 2012. All patients who were suspected to have Skull fracture on X-ray skull, during the study period, were included in study after informed consent and later on CT-Scan brain was done to see for extradural hematoma. Findings were recorded on a predesigned proforma including demographic data, radiological findings and the type of head trauma. Results: Out of 114 patients 85 (74.5%) were males and 29 (225.4%) were females. Age ranged from 2 to 70 years (18.23 ± 16.5 years). Among these patients the most important cause of head injury was fall from height in 65(57%), followed by road traffic accidents in 39 (34.2%), and assault in 10 (8.8%) patients. The most common site of fracture was parietal in 49 (43%) of patients, followed by frontal bone in 28 (24.6%) of patients, occipital bone in 24 (21.1%) of patients, and temporal bone in 23 (20.2%) of patients. Frequency of extradural hematoma among linear skull fracture was in 34 (29.8%) patients. Extradural hematoma was most common with parietotemporal linear skull fractures (73.5%). Conclusion: Extradural haematoma occurs commonly with linear skull fractures, so patients with linear skull fracture should be properly evaluated with CT brain. (author)

A Three-Dimensional Statistical Average Skull: Application of Biometric Morphing in Generating Missing Anatomy.

Science.gov (United States)

Teshima, Tara Lynn; Patel, Vaibhav; Mainprize, James G; Edwards, Glenn; Antonyshyn, Oleh M

2015-07-01

The utilization of three-dimensional modeling technology in craniomaxillofacial surgery has grown exponentially during the last decade. Future development, however, is hindered by the lack of a normative three-dimensional anatomic dataset and a statistical mean three-dimensional virtual model. The purpose of this study is to develop and validate a protocol to generate a statistical three-dimensional virtual model based on a normative dataset of adult skulls. Two hundred adult skull CT images were reviewed. The average three-dimensional skull was computed by processing each CT image in the series using thin-plate spline geometric morphometric protocol. Our statistical average three-dimensional skull was validated by reconstructing patient-specific topography in cranial defects. The experiment was repeated 4 times. In each case, computer-generated cranioplasties were compared directly to the original intact skull. The errors describing the difference between the prediction and the original were calculated. A normative database of 33 adult human skulls was collected. Using 21 anthropometric landmark points, a protocol for three-dimensional skull landmarking and data reduction was developed and a statistical average three-dimensional skull was generated. Our results show the root mean square error (RMSE) for restoration of a known defect using the native best match skull, our statistical average skull, and worst match skull was 0.58, 0.74, and 4.4  mm, respectively. The ability to statistically average craniofacial surface topography will be a valuable instrument for deriving missing anatomy in complex craniofacial defects and deficiencies as well as in evaluating morphologic results of surgery.

Surgical outcomes after reoperation for recurrent skull base meningiomas.

Science.gov (United States)

Magill, Stephen T; Lee, David S; Yen, Adam J; Lucas, Calixto-Hope G; Raleigh, David R; Aghi, Manish K; Theodosopoulos, Philip V; McDermott, Michael W

2018-05-04

OBJECTIVE Skull base meningiomas are surgically challenging tumors due to the intricate skull base anatomy and the proximity of cranial nerves and critical cerebral vasculature. Many studies have reported outcomes after primary resection of skull base meningiomas; however, little is known about outcomes after reoperation for recurrent skull base meningiomas. Since reoperation is one treatment option for patients with recurrent meningioma, the authors sought to define the risk profile for reoperation of skull base meningiomas. METHODS A retrospective review of 2120 patients who underwent resection of meningiomas between 1985 and 2016 was conducted. Clinical information was extracted from the medical records, radiology data, and pathology data. All records of patients with recurrent skull base meningiomas were reviewed. Demographic data, presenting symptoms, surgical management, outcomes, and complications data were collected. Kaplan-Meier analysis was used to evaluate survival after reoperation. Logistic regression was used to evaluate for risk factors associated with complications. RESULTS Seventy-eight patients underwent 100 reoperations for recurrent skull base meningiomas. Seventeen patients had 2 reoperations, 3 had 3 reoperations, and 2 had 4 or more reoperations. The median age at diagnosis was 52 years, and 64% of patients were female. The median follow-up was 8.5 years. Presenting symptoms included cranial neuropathy, headache, seizure, proptosis, and weakness. The median time from initial resection to first reoperation was 4.4 years and 4.1 years from first to second reoperation. Seventy-two percent of tumors were WHO grade I, 22% were WHO grade II, and 6% were WHO grade III. The sphenoid wing was the most common location (31%), followed by cerebellopontine angle (14%), cavernous sinus (13%), olfactory groove (12%), tuberculum sellae (12%), and middle fossa floor (5%). Forty-four (54%) tumors were ≥ 3 cm in maximum diameter at the time of the first

The Radiological Diagnosis of Defects of the Skull Vault

African Journals Online (AJOL)

scalp and its inner relationship to meninges and brain. Brain lesions which produce skull defects usually present as brain lesions and scalp lesions which produce skull defects always present as scalp lesions. This leave" us with the same general principle, that, though there may be 40 more or less common diseases which ...

Glass-melting using an IGBT full-bridge resonant converter

International Nuclear Information System (INIS)

Pacheco S, J.O.; Gutierrez O, E.; Benitez R, J.S.; Martinez V, J.; Lopez C, R.

1999-01-01

This work describes the design implementation and application of a full-bridge IGBT resonant converter used to obtain glass melting. The design procedure is discussed and complete converter schematics are provided, including drivers and control circuits. A brief review of the glass properties is given, and some coupling parameters of the induction furnace are also described. A very special provision is made to the coupling charge transformer and the heat induced to the glass itself, first by conduction, followed by direct electromagnetic induction when the glass becomes a conductor. A brief analysis of electromagnetic fields, current density and power induced in the material is given. A very simple method is presented to calculate the power absorbed by the load and therefore the efficiency of the heating process. Several tests are carried out to verify the effectiveness of this method. Finally, this paper describes the design and construction of a 5 k W, 50 k Hz Full-Bridge Resonant Converter (FBRC), based on IGBT transistors and a transformer-capacitor coupled to a thermal load composed of a metal-glass cylinder. For glass makers, the benefits obtained by implementing the melting system with an IGBT-based FRBC resides on the relative simplicity of its design, the low-cost of the components, the energy transfer efficiency, and the robustness of its operation. With a proper scaling, this melting system can be used, for instance, to vitrify hazardous industrial wastes, nuclear waste, and fume ashes from melting plants or combustion systems. (Author)

Additive Manufacturing of NiTiHf High Temperature Shape Memory Alloy

Science.gov (United States)

Benafan, Othmane; Bigelow, Glen S.; Elahinia, Mohammad; Moghaddam, Narges Shayesteh; Amerinatanzi, Amirhesam; Saedi, Soheil; Toker, Guher Pelin; Karaca, Haluk

2017-01-01

Additive manufacturing of a NiTi-20Hf high temperature shape memory alloy (HTSMA) was investigated. A selective laser melting (SLM) process by Phenix3D Systems was used to develop components from NiTiHf powder (of approximately 25-75 m particle fractions), and the thermomechanical response was compared to the conventionally vacuum induction skull melted counterpart. Transformation temperatures of the SLM material were found to be slightly lower due to the additional oxygen pick up from the gas atomization and melting process. The shape memory response in compression was measured for stresses up to 500 MPa, and transformation strains were found to be very comparable (Up to 1.26 for the as-extruded; up to 1.52 for SLM).

Reappraisal of Pediatric Diastatic Skull Fractures in the 3-Dimensional CT Era: Clinical Characteristics and Comparison of Diagnostic Accuracy of Simple Skull X-Ray, 2-Dimensional CT, and 3-Dimensional CT.

Science.gov (United States)

Sim, Sook Young; Kim, Hyun Gi; Yoon, Soo Han; Choi, Jong Wook; Cho, Sung Min; Choi, Mi Sun

2017-12-01

Diastatic skull fractures (DSFs) in children are difficult to detect in skull radiographs before they develop into growing skull fractures; therefore, little information is available on this topic. However, recent advances in 3-dimensional (3D) computed tomography (CT) imaging technology have enabled more accurate diagnoses of almost all forms of skull fracture. The present study was undertaken to document the clinical characteristics of DSFs in children and to determine whether 3D CT enhances diagnostic accuracy. Two hundred and ninety-two children younger than 12 years with skull fractures underwent simple skull radiography, 2-dimensional (2D) CT, and 3DCT. Results were compared with respect to fracture type, location, associated lesions, and accuracy of diagnosis. DSFs were diagnosed in 44 (15.7%) of children with skull fractures. Twenty-two patients had DSFs only, and the other 22 had DSFs combined with compound or mixed skull fractures. The most common fracture locations were the occipitomastoid (25%) and lambdoid (15.9%). Accompanying lesions consisted of subgaleal hemorrhages (42/44), epidural hemorrhages (32/44), pneumocephalus (17/44), and subdural hemorrhages (3/44). A total of 17 surgical procedures were performed on 15 of the 44 patients. Fourteen and 19 patients were confirmed to have DSFs by skull radiography and 2D CT, respectively, but 3D CT detected DSFs in 43 of the 44 children (P skull radiography or 2D CT for detecting DSFs. This finding indicates that 3D CT should be used routinely rather than 2D CT for the assessment of pediatric head trauma. Copyright © 2017 Elsevier Inc. All rights reserved.

Developmental changes in the skull morphology of common minke whales Balaenoptera acutorostrata.

Science.gov (United States)

Nakamura, Gen; Kato, Hidehiro

2014-10-01

We investigated growth-related and sex-related morphological changes in the skulls of 144 North Pacific common minke whales Balaenoptera acutorostrata. Measurement was conducted at 39 points on the skull and mandible to extract individual allometric equations relating the length and zygomatic width of the skull. The results revealed no significant differences in skull morphology by sex except for width of occipital bone. The size relative to the skull of the anatomical parts involved in feeding, such as the rostrum and mandible, increased after birth. In contrast, the sensory organs and the anatomical regions involved in neurological function, such as the orbit, tympanic bullae, and foramen magnum, were fully developed at birth, and their relative size reduced over the course of development. This is the first study to investigate developmental changes in the skull morphology using more than 100 baleen whale specimens, and we believe the results of this study will contribute greatly to multiple areas of baleen whale research, including taxonomy and paleontology. © 2014 Wiley Periodicals, Inc.

A QI Initiative to Reduce Hospitalization for Children With Isolated Skull Fractures.

Science.gov (United States)

Lyons, Todd W; Stack, Anne M; Monuteaux, Michael C; Parver, Stephanie L; Gordon, Catherine R; Gordon, Caroline D; Proctor, Mark R; Nigrovic, Lise E

2016-06-01

Although children with isolated skull fractures rarely require acute interventions, most are hospitalized. Our aim was to safely decrease the hospitalization rate for children with isolated skull fractures. We designed and executed this multifaceted quality improvement (QI) initiative between January 2008 and July 2015 to reduce hospitalization rates for children ≤21 years old with isolated skull fractures at a single tertiary care pediatric institution. We defined an isolated skull fracture as a skull fracture without intracranial injury. The QI intervention consisted of 2 steps: (1) development and implementation of an evidence-based guideline, and (2) dissemination of a provider survey designed to reinforce guideline awareness and adherence. Our primary outcome was hospitalization rate and our balancing measure was hospital readmission within 72 hours. We used standard statistical process control methodology to assess change over time. To assess for secular trends, we examined admission rates for children with an isolated skull fracture in the Pediatric Health Information System administrative database. We identified 321 children with an isolated skull fracture with a median age of 11 months (interquartile range 5-16 months). The baseline admission rate was 71% (179/249, 95% confidence interval, 66%-77%) and decreased to 46% (34/72, 95% confidence interval, 35%-60%) after implementation of our QI initiative. No child was readmitted after discharge. The admission rate in our secular trend control group remained unchanged at 78%. We safely reduced the hospitalization rate for children with isolated skull fractures without an increase in the readmissions. Copyright © 2016 by the American Academy of Pediatrics.

Preformed titanium cranioplasty after resection of skull base meningiomas - a technical note.

Science.gov (United States)

Schebesch, Karl-Michael; Höhne, Julius; Gassner, Holger G; Brawanski, Alexander

2013-12-01

Meningiomas of the fronto-basal skull are difficult to manage as the treatment usually includes extensive resection of the lesion, consecutive reconstruction of the meninges and of the skull. Especially after removal of spheno-orbital and sphenoid-wing meningiomas, the cosmetic result is of utmost importance. In this technical note, we present our institutional approach in the treatment of skull base meningiomas, focussing on the reconstruction of the neurocranium with individually preformed titanium cranioplasty (CRANIOTOP(®), CL Instruments, Germany). Two female patients (40 years, 64 years) are presented. Both patients presented with skull base lesions suggestive of meningiomas. The preoperative thin-sliced CT scan was processed to generate a 3D-model of the skull. On it, the resection was mapped and following a simulated resection, the cranioplasty was manufactured. Intra-operatively, the titanium plate served as a template for the skull resection and was implanted after microsurgical tumour removal, consecutively. The cosmetic result was excellent. Immediate postoperative CT scan revealed accurate fitting and complete tumour removal. Control Magnetic Resonance Imaging (MRI) within 12 weeks was possible without any artifacts. The comprehensive approach described indicates only one surgical procedure for tumour removal and for reconstruction of the skull. The titanium plate served as an exact template for complete resection of the osseous parts of the tumour. Cosmetic outcome was excellent and control MRI was possible post operatively. CRANIOTOP(®) cranioplasty is a safe and practical tool for reconstruction of the skull after meningioma surgery. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Effect of Melting Techniques on Ductile Iron castings Properties

Directory of Open Access Journals (Sweden)

Bockus, S.

2006-01-01

Full Text Available The study was designed to investigate the effects of the charge, melting conditions, nodularizing and inoculation on the ductile iron castings properties. Results showed that the temperature and holding time of the melt in an induction furnace and the intensity of spheroidizing effect on the carbon and residual magnesium contents in the ductile iron castings. The same grade of ductile iron may be obtained using different chemical compositions. The castings of ductile iron will be ferritic as-cast only when large amount of pig iron in the charge and in addition some-steps inoculating treatment are used.

SPECT/CT in the Diagnosis of Skull Base Osteomyelitis

International Nuclear Information System (INIS)

Damle, Nishikant Avinash; Kumar, Rakesh; Kumar, Praveen; Jaganthan, Sriram; Patnecha, Manish; Bal, Chandrasekhar; Bandopadhyaya, Gurupad; Malhotra, Arun

2011-01-01

Skull base osteomyelitis is a potentially fatal disease. We demonstrate here the utility of SPECT/CT in diagnosing this entity, which was not obvious on a planar bone scan. A 99mT c MDP bone scan with SPECT/CT was carried out on a patient with clinically suspected skull base osteomyelitis. Findings were correlated with contrast enhanced CT (CECT) and MRI. Planar images were equivocal, but SPECT/CT showed intense uptake in the body of sphenoid and petrous temporal bone as well as the atlas corresponding to irregular bone destruction on CT and MRI. These findings indicate that SPECT/CT may have an additional role beyond planar imaging in the detection of skull base osteomyelitis.

The Incidence and Topographic Distribution of Sutures Including Wormian Bones in Human Skulls.

Science.gov (United States)

Cirpan, Sibel; Aksu, Funda; Mas, Nuket

2015-07-01

The Wormian Bones are accessory bones located within the cranial sutures and fontanelles. The present article examines the incidence of Wormian Bones and compares the number and topographic distribution between the sutures including Wormian Bones in skulls of West Anatolian Population. One hundred fifty crania were examined. The parameters evaluated in the present study were as follows: the rate of skulls including Wormian Bones; the topographic distribution and frequencies of the sutures including Wormian Bones; the number of these sutures for each skull; the name and number of sutures that were bilaterally and symmetrically located on the right and left side of skull (paired sutures) and which coincidentally had Wormian Bones for each skull; the differences of frequencies between the paired sutures including Wormian Bones. The rate of skulls including Wormian Bones was determined as 59.3%. The maximum and minimum numbers of sutures, including Wormian Bones, were 6 in 1 skull and 1 in each of 30 skulls, respectively. The maximum and minimum rates of sutures that had Wormian Bones were found in left lambdoid 40.7% and right occipitomastoid 1.3% sutures, respectively. There was only a significant difference between the rate of right and left squamous sutures (P = 0.04). Forty-five skulls were including 55 pairs of bilaterally and symmetrically located sutures that coincidentally had Wormian Bones in each pair. Each of 35 skulls had 1 pair of sutures including Wormian Bones and each of 10 skulls had 2 pairs. In the present study, the rate of Wormian Bones was determined as 59.3% in West Anatolian Population. This incidence rate is considerably lower than the other reports, and it may be as a result of racial variations. These divergent bones were more frequently found in left lambdoid sutures (40.7%) and less frequently in right occipitomastoid sutures (1.3%). This study may guide the investigators dealing with the neurosurgery, orthopedy, radiology, anatomy, and

Augmented reality-assisted skull base surgery.

Science.gov (United States)

Cabrilo, I; Sarrafzadeh, A; Bijlenga, P; Landis, B N; Schaller, K

2014-12-01

Neuronavigation is widely considered as a valuable tool during skull base surgery. Advances in neuronavigation technology, with the integration of augmented reality, present advantages over traditional point-based neuronavigation. However, this development has not yet made its way into routine surgical practice, possibly due to a lack of acquaintance with these systems. In this report, we illustrate the usefulness and easy application of augmented reality-based neuronavigation through a case example of a patient with a clivus chordoma. We also demonstrate how augmented reality can help throughout all phases of a skull base procedure, from the verification of neuronavigation accuracy to intraoperative image-guidance. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Inca - interparietal bones in neurocranium of human skulls in central India.

Science.gov (United States)

Marathe, Rr; Yogesh, As; Pandit, Sv; Joshi, M; Trivedi, Gn

2010-01-01

Inca bones are accessory bones found in neurocranium of human skulls. Occurrence of Inca bones is rare as compared to other inter sutural bones such as wormian bones. These Inca ossicles are regarded as variants of the normal. The reporting of such occurrences is inadequate from Central India. To find the incidence of Inca variants in Central India. In the present study, 380 dried adult human skulls were examined. All specimen samples were procured from various Medical colleges of Central India. They were analyzed for gross incidence, sexual dimorphism and number of fragments of Inca bones. Gross incidence of Inca bones was found to be 1.315 %. Incidence rate was higher in male skulls than female skulls (male: 1.428%; female: 1.176%). The Inca bones frequently occurred signally. Out of the five observed Inca ossicles, two were fragmented. This data gives idea regarding gross incidence, sexual dimorphism and number of fragments of Inca bones in neurocranium of human skulls from Central India. The knowledge of this variable is useful for neurosurgeons, anthropologists and radiologists.

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable

CERN Document Server

SAE Aerospace Standards. London

2012-01-01

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable

Chronic imaging through "transparent skull" in mice.

Directory of Open Access Journals (Sweden)

Anna Steinzeig

Full Text Available Growing interest in long-term visualization of cortical structure and function requires methods that allow observation of an intact cortex in longitudinal imaging studies. Here we describe a detailed protocol for the "transparent skull" (TS preparation based on skull clearing with cyanoacrylate, which is applicable for long-term imaging through the intact skull in mice. We characterized the properties of the TS in imaging of intrinsic optical signals and compared them with the more conventional cranial window preparation. Our results show that TS is less invasive, maintains stabile transparency for at least two months, and compares favorably to data obtained from the conventional cranial window. We applied this method to experiments showing that a four-week treatment with the antidepressant fluoxetine combined with one week of monocular deprivation induced a shift in ocular dominance in the mouse visual cortex, confirming that fluoxetine treatment restores critical-period-like plasticity. Our results demonstrate that the TS preparation could become a useful method for long-term visualization of the living mouse brain.

Skull morphometry and vault sutures of Myrmecophaga tridactyla and Tamandua tetradactyla

Directory of Open Access Journals (Sweden)

Camila M. de S. Hossotani

2017-10-01

Full Text Available ABSTRACT This study aimed to examine the relationship between skull size and the level of cranial vault suture closure. A total of 50 Myrmecophaga tridactyla Linnaeus, 1758 and 178 Tamandua tetradactyla Linnaeus, 1758 skulls were analyzed in relation to 18 skull dimensions. The skulls were grouped into three levels of suture closure: no sutures closed (level 0, one or all the fallowing sutures closed: interfrontalis, sagitalis and coronalis (level 1 and all sutures closed (level 2. The results indicated that among the 18 variables measured, 17 showed significant differences (p ≤ 0.01 between level 0 and level 1 skulls of T. tetradactyla; as well as between level 0 and level 1, and level 0 and level 2 skulls of M. tridactyla. M. tridactyla level 1 and level 2 had no significant difference among any of the 18 dimensions. The foramen magnum height in both species showed no significant difference (p > 0.05 among any suture categories. In principle, suture closure level and cranial dimensions are related. The specimens with larger cranial dimensions showed greater number of cranial vault sutures closed for both species of anteaters. Tamandua tetradactyla and M. tridactyla specimens with none of the cranial vault suture closed have a foramen magnum height similar to those with cranial vault suture closed.

Implant-retained skull prosthesis to cover a large defect of the hairy skull resulting from treatment of a basal cell carcinoma : A clinical report

NARCIS (Netherlands)

Hoekstra, Jitske; Vissink, Arjan; Raghoebar, Gerry M; Visser, Anita

Skin carcinoma, particularly basal cell carcinoma, and its treatment can result in large defects of the hairy skull. A 53-year-old man is described who was surgically treated for a large basal cell carcinoma invading the skin and underlying tissue at the top of the hairy skull. Treatment consisted

Relevance of Whitnall's tubercle and auditory meatus in diagnosing exclusions during skull-photo superimposition.

Science.gov (United States)

Jayaprakash, Paul T; Hashim, Natassha; Yusop, Ridzuan Abd Aziz Mohd

2015-08-01

Video vision mixer based skull-photo superimposition is a popular method for identifying skulls retrieved from unidentified human remains. A report on the reliability of the superimposition method suggested increased failure rates of 17.3 to 32% to exclude and 15 to 20% to include skulls while using related and unrelated face photographs. Such raise in failures prompted an analysis of the methods employed for the research. The protocols adopted for assessing the reliability are seen to vary from those suggested by the practitioners in the field. The former include overlaying the skull- and face-images on the basis of morphology by relying on anthropometric landmarks on the front plane of the face-images and evaluating the goodness of match depending on mix-mode images; the latter consist of orienting the skull considering landmarks on both the eye and ear planes of the face- and skull-images and evaluating the match utilizing images seen in wipe-mode in addition to those in mix-mode. Superimposition of a skull with face-images of five living individuals in two sets of experiments, one following the procedure described for the research on reliability and the other applying the methods suggested by the practitioners has shown that overlaying the images on the basis of morphology depending on the landmarks on the front plane alone and assessing the match in mix-mode fails to exclude the skull. However, orienting the skull relying on the relationship between the anatomical landmarks on the skull- and face-images such as Whitnall's tubercle and exocanthus in the front (eye) plane and the porion and tragus in the rear (ear) plane as well as assessing the match using wipe-mode images enables excluding that skull while superimposing with the same set of face-images. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Shape and mechanics in thalattosuchian (Crocodylomorpha) skulls: implications for feeding behaviour and niche partitioning

Science.gov (United States)

Pierce, S E; Angielczyk, K D; Rayfield, E J

2009-01-01

Variation in modern crocodilian and extinct thalattosuchian crocodylomorph skull morphology is only weakly correlated with phylogeny, implying that factors other than evolutionary proximity play important roles in determining crocodile skull shape. To further explore factors potentially influencing morphological differentiation within the Thalattosuchia, we examine teleosaurid and metriorhynchid skull shape variation within a mechanical and dietary context using a combination of finite element modelling and multivariate statistics. Patterns of stress distribution through the skull were found to be very similar in teleosaurid and metriorhynchid species, with stress peaking at the posterior constriction of the snout and around the enlarged supratemporal fenestrae. However, the magnitudes of stresses differ, with metriorhynchids having generally stronger skulls. As with modern crocodilians, a strong linear relationship between skull length and skull strength exists, with short-snouted morphotypes experiencing less stress through the skull than long-snouted morphotypes under equivalent loads. Selection on snout shape related to dietary preference was found to work in orthogonal directions in the two families: diet is associated with snout length in teleosaurids and with snout width in metriorhynchids, suggesting that teleosaurid skulls were adapted for speed of attack and metriorhynchid skulls for force production. Evidence also indicates that morphological and functional differentiation of the skull occurred as a result of dietary preference, allowing closely related sympatric species to exploit a limited environment. Comparisons of the mechanical performance of the thalattosuchian skull with extant crocodilians show that teleosaurids and long-snouted metriorhynchids exhibit stress magnitudes similar to or greater than those of long-snouted modern forms, whereas short-snouted metriorhynchids display stress magnitudes converging on those found in short-snouted modern

Technology and equipment based on induction melters with ''cold'' crucible for reprocessing active metal waste

International Nuclear Information System (INIS)

Pastushkov, V.G.; Molchanov, A.V.; Serebryakov, V.P.; Smelova, T.V.; Shestoperov, I.N.

2000-01-01

The operation and, particularly, the decommissioning of NPPs and radiochemical plants result in substantial arisings of radioactive metal waste (RAMW) having different activity levels (from 5 x 10 -4 to ∼ 40 Ci/kg). The paper reviews the specific features of the technology and equipment used to melt RAMW in electric arc and induction furnaces with ceramic or 'cold' crucibles. The experimentally determined and calculated data are given on the level to which RAMW is decontaminated from the main radionuclides as well as on the distribution of the latter in the products of melting (ingot, slag, gaseous phase). Special attention is focused on the process and the facility for the induction-slag melting of RAMW in furnaces equipped with 'cold' crucibles. The work is described that is under way at SSC RF VNIINM to master the technology of melting simulated high activity level Zr-alloy and stainless steel waste. (authors)

Convection-driven melting in an n-octane pool fire bounded by an ice wall

DEFF Research Database (Denmark)

Farahani, Hamed Farmahini; Alva, Wilson Ulises Rojas; Rangwala, Ali S.

2017-01-01

×3cm) placed on one side of the tray. The melting front velocity, as an indicator of the melting rate of the ice, increased from 0.04cm/min to 1cm/min. The measurement of the burning rates and flame heights showed two distinctive behaviors; an induction period from the initial self-sustained flame...... to the multi-roll location. The multi-roll structure could be the main reason for the transport of the heat received from the flame toward the ice wall which causes the melting....

Melt cooling by bottom flooding. The COMET core-catcher concept

International Nuclear Information System (INIS)

Foit, Jerzy Jan; Alsmeyer, Hans; Tromm, Walter; Buerger, Manfred; Journeau, Christophe

2009-01-01

The COMET concept has been developed to cool an ex-vessel corium melt in case of a hypothetical severe accident leading to vessel melt-through. After erosion of a sacrificial concrete layer the melt is passively flooded by bottom injection of coolant water. The open porosities and large surface that are generated during melt solidification form a porous permeable structure that is permanently filled with the evaporating water and thus allows an efficient short-term as well as long-term removal of the decay heat. The advantages of this concept are the fast cool-down and complete solidification of the melt within less than one hour typically. This stops further release of fission products from the corium. A drawback may be the fast release of steam during the quenching process. Several experimental series have been performed by FZK (Germany) to test and optimise the functionality of the different variants of the COMET concept. Thermite generated melts of iron and aluminium oxide were used. The large scale COMET-H test series with sustained inductive heating includes nine experiments performed with an array of water injection channels embedded in a sacrificial concrete layer. Variation of the water inlet pressure and melt height showed that melts up to 50 cm height can be safely cooled with an overpressure of the coolant water of 0.2 bar. The CometPC concept is based on cooling by flooding the melt from the bottom through layers of porous, water filled concrete. The third variant of the COMET design, CometPCA, uses a layer of porous, water filled concrete CometPCA from which flow channels protrude into the layer of sacrificial concrete. This modified concept combines the advantages of the original COMET concept with flow channels and the high resistance of a water-filled porous concrete layer against downward melt attack. Four large scale CometPCA experiments (FZK, Germany) have demonstrated an efficient cooling of melts up to 50 cm height using the recommended water

Immediate, but Not Delayed, Microsurgical Skull Reconstruction Exacerbates Brain Damage in Experimental Traumatic Brain Injury Model

Science.gov (United States)

Lau, Tsz; Kaneko, Yuji; van Loveren, Harry; Borlongan, Cesario V.

2012-01-01

Moderate to severe traumatic brain injury (TBI) often results in malformations to the skull. Aesthetic surgical maneuvers may offer normalized skull structure, but inconsistent surgical closure of the skull area accompanies TBI. We examined whether wound closure by replacement of skull flap and bone wax would allow aesthetic reconstruction of the TBI-induced skull damage without causing any detrimental effects to the cortical tissue. Adult male Sprague-Dawley rats were subjected to TBI using the controlled cortical impact (CCI) injury model. Immediately after the TBI surgery, animals were randomly assigned to skull flap replacement with or without bone wax or no bone reconstruction, then were euthanized at five days post-TBI for pathological analyses. The skull reconstruction provided normalized gross bone architecture, but 2,3,5-triphenyltetrazolium chloride and hematoxylin and eosin staining results revealed larger cortical damage in these animals compared to those that underwent no surgical maneuver at all. Brain swelling accompanied TBI, especially the severe model, that could have relieved the intracranial pressure in those animals with no skull reconstruction. In contrast, the immediate skull reconstruction produced an upregulation of the edema marker aquaporin-4 staining, which likely prevented the therapeutic benefits of brain swelling and resulted in larger cortical infarcts. Interestingly, TBI animals introduced to a delay in skull reconstruction (i.e., 2 days post-TBI) showed significantly reduced edema and infarcts compared to those exposed to immediate skull reconstruction. That immediate, but not delayed, skull reconstruction may exacerbate TBI-induced cortical tissue damage warrants a careful consideration of aesthetic repair of the skull in TBI. PMID:22438975

Automated human skull landmarking with 2D Gabor wavelets

Science.gov (United States)

de Jong, Markus A.; Gül, Atilla; de Gijt, Jan Pieter; Koudstaal, Maarten J.; Kayser, Manfred; Wolvius, Eppo B.; Böhringer, Stefan

2018-05-01

Landmarking of CT scans is an important step in the alignment of skulls that is key in surgery planning, pre-/post-surgery comparisons, and morphometric studies. We present a novel method for automatically locating anatomical landmarks on the surface of cone beam CT-based image models of human skulls using 2D Gabor wavelets and ensemble learning. The algorithm is validated via human inter- and intra-rater comparisons on a set of 39 scans and a skull superimposition experiment with an established surgery planning software (Maxilim). Automatic landmarking results in an accuracy of 1–2 mm for a subset of landmarks around the nose area as compared to a gold standard derived from human raters. These landmarks are located in eye sockets and lower jaw, which is competitive with or surpasses inter-rater variability. The well-performing landmark subsets allow for the automation of skull superimposition in clinical applications. Our approach delivers accurate results, has modest training requirements (training set size of 30–40 items) and is generic, so that landmark sets can be easily expanded or modified to accommodate shifting landmark interests, which are important requirements for the landmarking of larger cohorts.

Role of skull radiography in the initial evaluation of minor head injury: a retrospective study

International Nuclear Information System (INIS)

Murshid, W.R.

1994-01-01

The use of skull radiography in the initial evaluation of minor head injured patients is controversial. In an attempt to evaluate its benefits, a retrospective study of 566 cases subjected to skull radiography following close minor head trauma (Glasgow Coma Scale 13-15), is presented. A skull fracture (linear vault, depressed or base of skull) was present in 64 (11%) cases. Only three (5%) who were found to have a skull fracture on skull radiography developed an intracranial injury which required surgery. Intracranial injuries developed in 19 (3%) cases and were followed by surgery in six (32%). All, except for one case, had a decreased level of consciousness and a Glasgow Coma Scale less than 15, few had focal neurological deficits. Management had not been altered by the results of skull radiography in any of the cases. We concluded that skull radiographs are unnecessary for the decision process in closed minor head injury because management decisions are based primarily on a careful neurological examination. When intracranial injuries are a concern, a CT scan should be obtained. (author)

Skull deformations in craniosynostosis and endocrine disorders: morphological and tomographic analysis of the skull from the crypt of the Silesian Piasts in Brzeg (16th-17th century), Poland.

Science.gov (United States)

Kozłowski, T; Cybulska, M; Błaszczyk, B; Krajewska, M; Jeśman, C

2014-10-01

of morphological and tomographic (CT) studies of the skull that was found in the crypt of the Silesian Piasts in the St. Jadwiga church in Brzeg (Silesia, Poland) are presented and discussed here. The established date of burial of probably a 20-30 years old male was 16th-17th century. The analyzed skull showed premature obliteration of the major skull sutures. It resulted in the braincase deformation, similar to the forms found in oxycephaly and microcephaly. Tomographic analysis revealed gross pathology. Signs of increased intracranial pressure, basilar invagination and hypoplasia of the occipital bone were observed. Those results suggested the occurrence of the very rare Arnold-Chiari syndrome. Lesions found in the sella turcica indicated the development of pituitary macroadenoma, which resulted in the occurrence of discreet features of acromegaly in the facial bones. The studied skull was characterized by a significantly smaller size of the neurocranium (horizontal circumference 471 mm, cranial capacity ∼ 1080 ml) and strongly expressed brachycephaly (cranial index=86.3), while its height remained within the range for non-deformed skulls. A narrow face, high eye-sockets and prognathism were also observed. Signs of alveolar process hypertrophy with rotation and displacement of the teeth were noted. The skull showed significant morphological differences compared to both normal and other pathological skulls such as those with pituitary gigantism, scaphocephaly and microcephaly. Copyright © 2014 Elsevier GmbH. All rights reserved.

Corium melt researches at VESTA test facility

Directory of Open Access Journals (Sweden)

Hwan Yeol Kim

2017-10-01

Full Text Available VESTA (Verification of Ex-vessel corium STAbilization and VESTA-S (-small test facilities were constructed at the Korea Atomic Energy Research Institute in 2010 to perform various corium melt experiments. Since then, several tests have been performed for the verification of an ex-vessel core catcher design for the EU-APR1400. Ablation tests of an impinging ZrO2 melt jet on a sacrificial material were performed to investigate the ablation characteristics. ZrO2 melt in an amount of 65–70 kg was discharged onto a sacrificial material through a well-designed nozzle, after which the ablation depths were measured. Interaction tests between the metallic melt and sacrificial material were performed to investigate the interaction kinetics of the sacrificial material. Two types of melt were used: one is a metallic corium melt with Fe 46%, U 31%, Zr 16%, and Cr 7% (maximum possible content of U and Zr for C-40, and the other is a stainless steel (SUS304 melt. Metallic melt in an amount of 1.5–2.0 kg was delivered onto the sacrificial material, and the ablation depths were measured. Penetration tube failure tests were performed for an APR1400 equipped with 61 in-core instrumentation penetration nozzles and extended tubes at the reactor lower vessel. ZrO2 melt was generated in a melting crucible and delivered down into an interaction crucible where the test specimen is installed. To evaluate the tube ejection mechanism, temperature distributions of the reactor bottom head and in-core instrumentation penetration were measured by a series of thermocouples embedded along the specimen. In addition, lower vessel failure tests for the Fukushima Daiichi nuclear power plant are being performed. As a first step, the configuration of the molten core in the plant was investigated by a melting and solidification experiment. Approximately 5 kg of a mixture, whose composition in terms of weight is UO2 60%, Zr 10%, ZrO2 15%, SUS304 14%, and B4C 1%, was melted in a

Trepanation and enlarged parietal foramen on skulls from the Loyalty Islands (Melanesia).

Science.gov (United States)

Vasilyev, Sergey V; Sviridov, Alexey A

2017-06-01

The goal of this study is a comprehensive examination of openings discovered on two skulls in the collection of skeletal remains from the Loyalty Islands (Melanesia). The skull No. 1524 displayed an evidence of successful trepanation, and the skull No. 7985 revealed openings that were reminiscent of a trepanation, however, we are inclined to believe that in the latter case we are dealing with a rare genetic anomaly - enlarged parietal foramen.

Numerical evaluation of the skull for human neuromodulation with transcranial focused ultrasound

Science.gov (United States)

Mueller, Jerel K.; Ai, Leo; Bansal, Priya; Legon, Wynn

2017-12-01

Objective. Transcranial focused ultrasound is an emerging field for human non-invasive neuromodulation, but its dosing in humans is difficult to know due to the skull. The objective of the present study was to establish modeling methods based on medical images to assess skull differences between individuals on the wave propagation of ultrasound. Approach. Computational models of transcranial focused ultrasound were constructed using CT and MR scans to solve for intracranial pressure. We explored the effect of including the skull base in models, different transducer placements on the head, and differences between 250 kHz or 500 kHz acoustic frequency for both female and male models. We further tested these features using linear, nonlinear, and elastic simulations. To better understand inter-subject skull thickness and composition effects we evaluated the intracranial pressure maps between twelve individuals at two different skull sites. Main results. Nonlinear acoustic simulations resulted in virtually identical intracranial pressure maps with linear acoustic simulations. Elastic simulations showed a difference in max pressures and full width half maximum volumes of 15% at most. Ultrasound at an acoustic frequency of 250 kHz resulted in the creation of more prominent intracranial standing waves compared to 500 kHz. Finally, across twelve model human skulls, a significant linear relationship to characterize intracranial pressure maps was not found. Significance. Despite its appeal, an inherent problem with the use of a noninvasive transcranial ultrasound method is the difficulty of knowing intracranial effects because of the skull. Here we develop detailed computational models derived from medical images of individuals to simulate the propagation of neuromodulatory ultrasound across the skull and solve for intracranial pressure maps. These methods allow for a much better understanding of the intracranial effects of ultrasound for an individual in order to

CHONDROID SKULL BASE TUMORS (A REVIEW OF LITERATURE

Directory of Open Access Journals (Sweden)

T. G. Gasparyan

2012-01-01

Full Text Available Chondroid skull base tumors are a rare and little studied pathology; many problems of their classification, diagnosis and treatment remain to be solved. This group of neoplasms is referred to as bone tumors arising from the cartilaginous tissue of the skull base bones, particularly from the bones formed during chondral osteogenesis. The paper details the clinical picture, X-ray and morphological diagnosis of chondroid tumors. Particular attention is given to surgery and radiotherapy for this category of tumors.

Imaging of the central skull base.

Science.gov (United States)

Borges, Alexandra

2009-11-01

The central skull base (CSB) constitutes a frontier between the extracranial head and neck and the middle cranial fossa. The anatomy of this region is complex, containing most of the bony foramina and canals of the skull base traversed by several neurovascular structures that can act as routes of spread for pathologic processes. Lesions affecting the CSB can be intrinsic to its bony-cartilaginous components; can arise from above, within the intracranial compartment; or can arise from below, within the extracranial head and neck. Crosssectional imaging is indispensable in the diagnosis, treatment planning, and follow-up of patients with CSB lesions. This review focuses on a systematic approach to this region based on an anatomic division that takes into account the major tissue constituents of the CSB.

Dehydration and melting experiments constrain the fate of subducted sediments

Science.gov (United States)

Johnson, Marie C.; Plank, Terry

2000-12-01

Geochemical tracers demonstrate that elements are cycled from subducted sediments into the arc melting regime at subduction zones, although the transfer mechanism is poorly understood. Are key elements (Th, Be, Rb) lost during sediment dehydration or is sediment melting required? To investigate this question, we conducted phase equilibria and trace element partitioning experiments on a pelagic red clay for conditions appropriate to the slab beneath arc volcanoes (2-4 GPa, 600°-1000°C). Using both piston cylinders and multianvils, we determined the solidus, phase stabilities, and major element compositions of coexisting phases. The solidus (H2O + Cl fluid-saturated) was located at 775 ± 25°C at 2 GPa, 810 ± 15°C at 3 GPa, and 1025 ± 25°C at 4 GPa with noevidence for complete miscibility between melt and fluid. This sediment composition produces a profusion of phases both above and below the solidus: garnet, jadeitic pyroxene, alkali-rich amphibole, phengite, biotite, magnetite, coesite, kyanite, apatite, zircon, Cl-rich fluids, and peraluminous to peralkaline granitic melts. At 2 GPa the phengite dehydration solidus is at 800°-825°C, while biotite breaks down between 850° and 900°C. To explore trace element partitioning across the solidus at 2 GPa, we used diamonds to trap fluids and melts. Both the bulk sediment residues and diamond traps were analyzed postexperiment by inductively coupled plasma-mass spectrometry (ICP-MS) and inductively coupled plasma-atomic emission spectrometry (ICP-AES) for 40 elements for which we calculated bulk partition coefficients (D = Csolid/Cfluid). Below the solidus, Rb, Sr, Ba, and Pb showed the greatest mobility (D ˜ 0.5-1.0), while at the solidus, Th and Be became notably partitioned into the melt (D values changing from >2.0 to oceanic crust dehydration) may provide new constraints on the next generation of thermal/geodynamical models of subduction zones.

Inca - interparietal bones in neurocranium of human skulls in central India

Directory of Open Access Journals (Sweden)

R R Marathe

2010-01-01

Full Text Available Inca bones are accessory bones found in neurocranium of human skulls. Occurrence of Inca bones is rare as compared to other inter sutural bones such as wormian bones. These Inca ossicles are regarded as variants of the normal. The reporting of such occurrences is inadequate from Central India. Objectives: To find the incidence of Inca variants in Central India. Materials and Methods: In the present study, 380 dried adult human skulls were examined. All specimen samples were procured from various Medical colleges of Central India. They were analyzed for gross incidence, sexual dimorphism and number of fragments of Inca bones. Results: Gross incidence of Inca bones was found to be 1.315 %. Incidence rate was higher in male skulls than female skulls (male: 1.428%; female: 1.176%. The Inca bones frequently occurred signally. Out of the five observed Inca ossicles, two were fragmented. Conclusions: This data gives idea regarding gross incidence, sexual dimorphism and number of fragments of Inca bones in neurocranium of human skulls from Central India. The knowledge of this variable is useful for neurosurgeons, anthropologists and radiologists.

Independent instances of "souvenir" Asian skulls from the Tampa Bay area.

Science.gov (United States)

Wienker, C W; Wood, J E; Diggs, C A

1990-05-01

In the summer of 1984, police in Pinellas County, Florida, confiscated six identically colored imported Asian skulls (in a shipping case) from a private citizen. In May 1988, in nearby Hillsborough County, police confiscated a very similar skull from another private citizen, who allegedly had found it in an abandoned house. Aside from slight color differences between the six found in Pinellas County and the one found in Hillsborough County, the skulls are virtually identical in their osteological characteristics and condition and in the vital statistics derived from each. Each skull is as clean and dry as those typically sold by commercial scientific supply outlets in the United States. Each is edentulous (primarily premortem), between approximately 20 and 60 years of age at death, and morphologically Asian. Five of the seven are morphologically male, one is morphologically female, and one is a mosaic with respect to gender-related features. Police, medical examiners, coroners, and forensic anthropologists should be aware of such "souvenir" specimens, in the event that they encounter similar skulls. Discriminant function analyses for race and sex yield considerably conflicting results, which underscores the need for using extreme caution when interpreting forensic science estimates based on such techniques.

The effect of Ti and Nb on nitrogen dissolution reaction in stainless steel melt

International Nuclear Information System (INIS)

Jang, Min Whan; Hong, In Kook; Pak, Jong Jin; Song, Hyo Seok; Lee, Yong Deuk

2002-01-01

A kinetic study of nitrogen dissolution in STS304 stainless steel melt containing Ti and Nb has been carried out at 1500 degree C using an induction furnace and a levitation melting furnace. At low O and S levels, the nitrogen dissolution rate showed the first-order kinetics being controlled by the mass transfer of nitrogen in the melt. Ti addition to STS304 stainless melt significantly retarded the nitrogen dissolution rate by the formation of solid Ti oxide layer adhered on the melt surface. Nb did not affect the rate of nitrogen dissolution. In the levitation melting experiment where the oxide layer was removed from the melt surface, Ti did not retard the nitrogen dissolution rate. Simultaneous addition of Ti and Al increased the dissolution rate by the formation of non-wetting Al 2 O 3 on the melt surface. A small addition of CaO-Al 2 O 3 synthetic flux to Ti containing melt was very effective to remove the oxide layer, hence to increase the nitrogen dissolution rate

The effect of Ti and Nb on nitrogen dissolution reaction in stainless steel melt

Energy Technology Data Exchange (ETDEWEB)

Jang, Min Whan; Hong, In Kook; Pak, Jong Jin [Hanyang Univ., Ansan (Korea, Republic of); Song, Hyo Seok; Lee, Yong Deuk [POSCO, Pohang (Korea, Republic of)

2002-03-01

A kinetic study of nitrogen dissolution in STS304 stainless steel melt containing Ti and Nb has been carried out at 1500 degree C using an induction furnace and a levitation melting furnace. At low O and S levels, the nitrogen dissolution rate showed the first-order kinetics being controlled by the mass transfer of nitrogen in the melt. Ti addition to STS304 stainless melt significantly retarded the nitrogen dissolution rate by the formation of solid Ti oxide layer adhered on the melt surface. Nb did not affect the rate of nitrogen dissolution. In the levitation melting experiment where the oxide layer was removed from the melt surface, Ti did not retard the nitrogen dissolution rate. Simultaneous addition of Ti and Al increased the dissolution rate by the formation of non-wetting Al{sub 2}O{sub 3} on the melt surface. A small addition of CaO-Al{sub 2}O{sub 3} synthetic flux to Ti containing melt was very effective to remove the oxide layer, hence to increase the nitrogen dissolution rate.

Segmentation of human skull in MRI using statistical shape information from CT data.

Science.gov (United States)

Wang, Defeng; Shi, Lin; Chu, Winnie C W; Cheng, Jack C Y; Heng, Pheng Ann

2009-09-01

To automatically segment the skull from the MRI data using a model-based three-dimensional segmentation scheme. This study exploited the statistical anatomy extracted from the CT data of a group of subjects by means of constructing an active shape model of the skull surfaces. To construct a reliable shape model, a novel approach was proposed to optimize the automatic landmarking on the coupled surfaces (i.e., the skull vault) by minimizing the description length that incorporated local thickness information. This model was then used to locate the skull shape in MRI of a different group of patients. Compared with performing landmarking separately on the coupled surfaces, the proposed landmarking method constructed models that had better generalization ability and specificity. The segmentation accuracies were measured by the Dice coefficient and the set difference, and compared with the method based on mathematical morphology operations. The proposed approach using the active shape model based on the statistical skull anatomy presented in the head CT data contributes to more reliable segmentation of the skull from MRI data.

Chemical decontamination and melt densification

International Nuclear Information System (INIS)

Dillon, R.L.; Griggs, B.; Kemper, R.S.; Nelson, R.G.

1976-01-01

Preliminary studies on the chemical decontamination and densification of Zircaloy, stainless steel, and Inconel undissolved residues remaining after dissolution of the UO 2 --PuO 2 spent fuel material from sheared fuel bundles are reported. The studies were made on cold or very small samples to demonstrate the feasibility of the processes developed before proceeding to hot cell demonstrations with kg level of the sources. A promising aqueous decontamination method for Zr alloy cladding was developed in which oxidized surfaces are conditioned with HF prior to leaching with ammonium oxalate, ammonium citrate, ammonium fluoride, and hydrogen peroxide. Feasibility of molten salt decontamination of oxidized Zircaloy was demonstrated. A low melting alloy of Zircaloy, stainless steel, and Inconel was obtained in induction heated graphite crucibles. Segregated Zircaloy cladding sections were directly melted by the inductoslag process to yield a metal ingot suitable for storage. Both Zircaloy and Zircaloy--stainless steel--Inconel alloys proved to be highly satisfactory getters and sinks for recovered tritium

Accurate 3-D Profile Extraction of Skull Bone Using an Ultrasound Matrix Array.

Science.gov (United States)

Hajian, Mehdi; Gaspar, Robert; Maev, Roman Gr

2017-12-01

The present study investigates the feasibility, accuracy, and precision of 3-D profile extraction of the human skull bone using a custom-designed ultrasound matrix transducer in Pulse-Echo. Due to the attenuative scattering properties of the skull, the backscattered echoes from the inner surface of the skull are severely degraded, attenuated, and at some points overlapped. Furthermore, the speed of sound (SOS) in the skull varies significantly in different zones and also from case to case; if considered constant, it introduces significant error to the profile measurement. A new method for simultaneous estimation of the skull profiles and the sound speed value is presented. The proposed method is a two-folded procedure: first, the arrival times of the backscattered echoes from the skull bone are estimated using multi-lag phase delay (MLPD) and modified space alternating generalized expectation maximization (SAGE) algorithms. Next, these arrival times are fed into an adaptive sound speed estimation algorithm to compute the optimal SOS value and subsequently, the skull bone thickness. For quantitative evaluation, the estimated bone phantom thicknesses were compared with the mechanical measurements. The accuracies of the bone thickness measurements using MLPD and modified SAGE algorithms combined with the adaptive SOS estimation were 7.93% and 4.21%, respectively. These values were 14.44% and 10.75% for the autocorrelation and cross-correlation methods. Additionally, the Bland-Altman plots showed the modified SAGE outperformed the other methods with -0.35 and 0.44 mm limits of agreement. No systematic error that could be related to the skull bone thickness was observed for this method.

Difficulties of clinical radiodiagnosis of concomitant injuries of fornix and base of the skull

International Nuclear Information System (INIS)

Krutitskij, A.G.; Semisalov, S.Ya.

1987-01-01

Clinical radiological semiotics in 234 patients with injuries of fornix and base of the skull is studied. Among skull injuries the most critical are those of fornix and base of anterior parts of the skull. Severity of state doesn't exclude, but requires an obligatory X-ray examination, at least - review radiographs of the skull. When choosing the volume of surgical intervention the data on X-ray examination along with clinical pattern should be taken account of

Skull metastases detecting on arterial spin labeling perfusion: Three case reports and review of literature.

Science.gov (United States)

Ryu, Kyeong H; Baek, Hye J; Cho, Soo B; Moon, Jin I; Choi, Bo H; Park, Sung E; An, Hyo J

2017-11-01

Detection of skull metastases is as important as detection of brain metastases because early diagnosis of skull metastases is a crucial determinant of treatment. However, the skull can be a blind spot for assessing metastases on routine brain magnetic resonance imaging (MRI). To the best of our knowledge, the finding of skull metastases on arterial spin labeling (ASL) has not been reported. ASL is a specific MRI sequence for evaluating cerebral blood flow using magnetized endogenous inflow blood. This study uses ASL as a routine sequence of brain MRI protocol and describes 3 clinical cases of skull metastases identified by ASL. The study also highlights the clinical usefulness of ASL in detecting skull metastases. Three patients with known malignancy underwent brain MRI to evaluate for brain metastases. All of the skull metastases were conspicuously depicted on routine ASL images, and the lesions correlated well with other MRI sequences. Three patients received palliative chemotherapy. Three patients are being followed up regularly at the outpatient department. The routine use of ASL may help to detect lesions in blind spots, such as skull metastases, and to facilitate the evaluation of intracranial pathologies without the use of contrast materials in exceptional situations.

Study of Mastoid Canals and Grooves in North Karnataka Human Skulls

OpenAIRE

Hadimani, Gavishiddappa Andanappa; Bagoji, Ishwar Basavantappa

2013-01-01

Introduction: This study was undertaken to observe the frequency of mastoid canals and grooves in north Karnataka dry human skulls. 100 dry human skulls of unknown age and sex from the department of Anatomy were selected and observed for the present study.

Morphological and Radiographic Studies on the Skull of Indian Blackbuck (Antilope cervicapra)

OpenAIRE

Choudhary, Om Prakash; Singh, Ishwer

2016-01-01

The phenotypic appearance of the head of animal species depends strongly on the shape of the skull. The present study has been carried out on morphological and radiographic characteristics of skull of the Indian Blackbuck. The skull comprised of cranial and facial bones. The cranial bones included occipital, sphenoid, ethmoid, interparietal, parietal, frontal and temporal. The occipital was a single bone surrounding the foramen magnum. The sphenoid was a single bone and situated between the o...

Congenital muscle dystrophy and diet consistency affect mouse skull shape differently.

Science.gov (United States)

Spassov, Alexander; Toro-Ibacache, Viviana; Krautwald, Mirjam; Brinkmeier, Heinrich; Kupczik, Kornelius

2017-11-01

The bones of the mammalian skull respond plastically to changes in masticatory function. However, the extent to which muscle function affects the growth and development of the skull, whose regions have different maturity patterns, remains unclear. Using muscle dissection and 3D landmark-based geometric morphometrics we investigated the effect of changes in muscle function established either before or after weaning, on skull shape and muscle mass in adult mice. We compared temporalis and masseter mass and skull shape in mice with a congenital muscle dystrophy (mdx) and wild type (wt) mice fed on either a hard or a soft diet. We found that dystrophy and diet have distinct effects on the morphology of the skull and the masticatory muscles. Mdx mice show a flattened neurocranium with a more dorsally displaced foramen magnum and an anteriorly placed mandibular condyle compared with wt mice. Compared with hard diet mice, soft diet mice had lower masseter mass and a face with more gracile features as well as labially inclined incisors, suggesting reduced bite strength. Thus, while the early-maturing neurocranium and the posterior portion of the mandible are affected by the congenital dystrophy, the late-maturing face including the anterior part of the mandible responds to dietary differences irrespective of the mdx mutation. Our study confirms a hierarchical, tripartite organisation of the skull (comprising neurocranium, face and mandible) with a modular division based on development and function. Moreover, we provide further experimental evidence that masticatory loading is one of the main environmental stimuli that generate craniofacial variation. © 2017 Anatomical Society.

Application of CUSA Excel ultrasonic aspiration system in resection of skull base meningiomas.

Science.gov (United States)

Tang, Hailiang; Zhang, Haishi; Xie, Qing; Gong, Ye; Zheng, Mingzhe; Wang, Daijun; Zhu, Hongda; Chen, Xiancheng; Zhou, Liangfu

2014-12-01

Here, we introduced our short experience on the application of a new CUSA Excel ultrasonic aspiration system, which was provided by Integra Lifesciences corporation, in skull base meningiomas resection. Ten patients with anterior, middle skull base and sphenoid ridge meningioma were operated using the CUSA Excel ultrasonic aspiration system at the Neurosurgery Department of Shanghai Huashan Hospital from August 2014 to October 2014. There were six male and four female patients, aged from 38 to 61 years old (the mean age was 48.5 years old). Five cases with tumor located at anterior skull base, three cases with tumor on middle skull base, and two cases with tumor on sphenoid ridge. All the patents received total resection of meningiomas with the help of this new tool, and the critical brain vessels and nerves were preserved during operations. All the patients recovered well after operation. This new CUSA Excel ultrasonic aspiration system has the advantage of preserving vital brain arteries and cranial nerves during skull base meningioma resection, which is very important for skull base tumor operations. This key step would ensure a well prognosis for patients. We hope the neurosurgeons would benefit from this kind of technique.

Epigenetic control of skull morphogenesis by histone deacetylase 8

OpenAIRE

Haberland, Michael; Mokalled, Mayssa H.; Montgomery, Rusty L.; Olson, Eric N.

2009-01-01

Histone deacetylases (Hdacs) are transcriptional repressors with crucial roles in mammalian development. Here we provide evidence that Hdac8 specifically controls patterning of the skull by repressing a subset of transcription factors in cranial neural crest cells. Global deletion of Hdac8 in mice leads to perinatal lethality due to skull instability, and this is phenocopied by conditional deletion of Hdac8 in cranial neural crest cells. Hdac8 specifically represses the aberrant expression of...

The remarkable convergence of skull shape in crocodilians and toothed whales.

Science.gov (United States)

McCurry, Matthew R; Evans, Alistair R; Fitzgerald, Erich M G; Adams, Justin W; Clausen, Philip D; McHenry, Colin R

2017-03-15

The striking resemblance of long-snouted aquatic mammals and reptiles has long been considered an example of morphological convergence, yet the true cause of this similarity remains untested. We addressed this deficit through three-dimensional morphometric analysis of the full diversity of crocodilian and toothed whale (Odontoceti) skull shapes. Our focus on biomechanically important aspects of shape allowed us to overcome difficulties involved in comparing mammals and reptiles, which have fundamental differences in the number and position of skull bones. We examined whether diet, habitat and prey size correlated with skull shape using phylogenetically informed statistical procedures. Crocodilians and toothed whales have a similar range of skull shapes, varying from extremely short and broad to extremely elongate. This spectrum of shapes represented more of the total variation in our dataset than between phylogenetic groups. The most elongate species (river dolphins and gharials) are extremely convergent in skull shape, clustering outside of the range of the other taxa. Our results suggest the remarkable convergence between long-snouted river dolphins and gharials is driven by diet rather than physical factors intrinsic to riverine environments. Despite diverging approximately 288 million years ago, crocodilians and odontocetes have evolved a remarkably similar morphological solution to feeding on similar prey. © 2017 The Author(s).

Surveillance for work-related skull fractures in Michigan.

Science.gov (United States)

Kica, Joanna; Rosenman, Kenneth D

2014-12-01

The objective was to develop a multisource surveillance system for work-related skull fractures. Records on work-related skull fractures were obtained from Michigan's 134 hospitals, Michigan's Workers' Compensation Agency and death certificates. Cases from the three sources were matched to eliminate duplicates from more than one source. Workplaces where the most severe injuries occurred were referred to OSHA for an enforcement inspection. There were 318 work related skull fractures, not including facial fractures, between 2010 and 2012. In 2012, after the inclusion of facial fractures, 316 fractures were identified of which 218 (69%) were facial fractures. The Bureau of Labor Statistic's (BLS) 2012 estimate of skull fractures in Michigan, which includes facial fractures, was 170, which was 53.8% of those identified from our review of medical records. The inclusion of facial fractures in the surveillance system increased the percentage of women identified from 15.4% to 31.2%, decreased severity (hospitalization went from 48.7% to 10.6% and loss of consciousness went from 56.5% to 17.8%), decreased falls from 48.2% to 27.6%, and increased assaults from 5.0% to 20.2%, shifted the most common industry from construction (13.3%) to health care and social assistance (15.0%) and the highest incidence rate from males 65+ (6.8 per 100,000) to young men, 20-24 years (9.6 per 100,000). Workplace inspections resulted in 45 violations and $62,750 in penalties. The Michigan multisource surveillance system of workplace injuries had two major advantages over the existing national system: (a) workplace investigations were initiated hazards identified and safety changes implemented at the facilities where the injuries occurred; and (b) a more accurate count was derived, with 86% more work-related skull fractures identified than BLS's employer based estimate. A more comprehensive system to identify and target interventions for workplace injuries was implemented using hospital and

Numerical modelling of the tilt casting processes of titanium alumindes

OpenAIRE

Wang, Hong

2008-01-01

This research has investigated the modelling and optimisation of the tilt casting process of Titanium Aluminides (TiAl). This study is carried out in parallel with the experimental research undertaken in IRC at the University of Birmingham. They propose to use tilt casting inside a vacuum chamber and attempt to combine this tilt casting process with Induction Skull Melting (ISM). A totally novel process is developing for investment casting, which is suitable for casting gamma TiAl.\\ud \\ud As ...

Creation of a High-fidelity, Low-cost Pediatric Skull Fracture Ultrasound Phantom.

Science.gov (United States)

Soucy, Zachary P; Mills, Lisa; Rose, John S; Kelley, Kenneth; Ramirez, Francisco; Kuppermann, Nathan

2015-08-01

Over the past decade, point-of-care ultrasound has become a common tool used for both procedures and diagnosis. Developing high-fidelity phantoms is critical for training in new and novel point-of-care ultrasound applications. Detecting skull fractures on ultrasound imaging in the younger-than-2-year-old patient is an emerging area of point-of-care ultrasound research. Identifying a skull fracture on ultrasound imaging in this age group requires knowledge of the appearance and location of sutures to distinguish them from fractures. There are currently no commercially available pediatric skull fracture models. We outline a novel approach to building a cost-effective, simple, high-fidelity pediatric skull fracture phantom to meet a unique training requirement. © 2015 by the American Institute of Ultrasound in Medicine.

Juvenile nasopharyngeal angiofibroma with skull base invasion : intratumoral direct puncture embolization

Energy Technology Data Exchange (ETDEWEB)

Shin, Hye Young; Kim, Sun Yong; Suh, Jung Ho; Park, Kee Hyun [Ajou Univ., Suwon (Korea, Republic of). Coll. of Medicine

1998-04-01

The purpose of this study is to demonstrate the utility and efficacy of percutaneous direct glue embolization for juvenile nasopharyngeal angiofibromas with skull base invasion. In nine cases of juvenile nasopharyngeal angiofibromas with invasion of the skull base, embolization under general anethesia was performed. Using an 18G spinal needle, direct puncture were made via the transnasal or mandibular sciatic notch. A glue-lipiodol mixture (1:1 -1:3) was injected slowly for 15 to 30 seconds under fluoroscopic control; the number of post-embolization angiography and the distribution of embolic materials was assessed on CT within 1-3 days. The mass was surgically removed 3 to 7 days after embolization. Direct glue embolization of juvenile angiofibroma with skull base invasion appears to be a simple and safe procedure. The technique could be used for other hypervascular lesions in the base of the skull or parapharyngeal space. (author). 19 refs., 1 tab., 2 figs.

Juvenile nasopharyngeal angiofibroma with skull base invasion : intratumoral direct puncture embolization

International Nuclear Information System (INIS)

Shin, Hye Young; Kim, Sun Yong; Suh, Jung Ho; Park, Kee Hyun

1998-01-01

The purpose of this study is to demonstrate the utility and efficacy of percutaneous direct glue embolization for juvenile nasopharyngeal angiofibromas with skull base invasion. In nine cases of juvenile nasopharyngeal angiofibromas with invasion of the skull base, embolization under general anethesia was performed. Using an 18G spinal needle, direct puncture were made via the transnasal or mandibular sciatic notch. A glue-lipiodol mixture (1:1 -1:3) was injected slowly for 15 to 30 seconds under fluoroscopic control; the number of post-embolization angiography and the distribution of embolic materials was assessed on CT within 1-3 days. The mass was surgically removed 3 to 7 days after embolization. Direct glue embolization of juvenile angiofibroma with skull base invasion appears to be a simple and safe procedure. The technique could be used for other hypervascular lesions in the base of the skull or parapharyngeal space. (author). 19 refs., 1 tab., 2 figs

Anatomical and radiographic study of the white-eared opossum (Didelphis albiventris skull1

Directory of Open Access Journals (Sweden)

Bruno C. Schimming

Full Text Available ABSTRACT: This study was made to investigate the anatomical features of the white-eared opossum skull, by osteology and radiographic anatomy. For this, five animals were used without sexual distinction. The skull was examined by radiographic and macroscopic characteristics. The skulls were then subjected to maceration. The skull was described macroscopically according to standard views, i.e. dorsal and caudal, lateral, ventral, and midsagittal. The skull can be divided into facial (viscerocranium and cranial (neurocranium regions. The facial region was elongated and more developed than neurocranium. The supraorbital foramen was absent. The tympanic bulla is not well developed. The zygomatic arch was formed by zygomatic process of the temporal bone, zygomatic process of the maxilla, and temporal process of the zygomatic bone. There was no significant difference between bones found in this study when compared with those described for others mammals. These findings may contribute to the better understanding of the anatomy and biology of the white-eared opossum.

Clinicopathological and Molecular Histochemical Review of Skull Base Metastasis from Differentiated Thyroid Carcinoma

International Nuclear Information System (INIS)

Matsuno, Akira; Murakami, Mineko; Hoya, Katsumi; Yamada, Shoko M.; Miyamoto, Shinya; Yamada, So; Son, Jae-Hyun; Nishido, Hajime; Ide, Fuyuaki; Nagashima, Hiroshi; Sugaya, Mutsumi; Hirohata, Toshio; Mizutani, Akiko; Okinaga, Hiroko; Ishii, Yudo; Tahara, Shigeyuki; Teramoto, Akira; Osamura, R. Yoshiyuki; Yamazaki, Kazuto; Ishida, Yasuo

2013-01-01

Skull base metastasis from differentiated thyroid carcinoma including follicular thyroid carcinoma (FTC) and papillary thyroid carcinoma (PTC) is a rare clinical entity. Eighteen FTC cases and 10 PTC cases showing skull base metastasis have been reported. The most common symptom of skull base metastasis from FTC and PTC is cranial nerve dysfunction. Bone destruction and local invasion to the surrounding soft tissues are common on radiological imaging. Skull base metastases can be the initial clinical presentation of FTC and PTC in the presence of silent primary sites. The possibility of skull base metastasis from FTC and PTC should be considered in patients with the clinical symptoms of cranial nerve dysfunction and radiological findings of bone destruction. A variety of genetic alterations in thyroid tumors have been identified to have a fundamental role in their tumorigenesis. Molecular histochemical studies are useful for elucidating the histopathological features of thyroid carcinoma. Recent molecular findings may provide novel molecular-based treatment strategies for thyroid carcinoma

[Extensive tumor of the skull base: sphenoid sinus adenocarcinoma].

Science.gov (United States)

Kallel, Souha; Sellami, Moncef

2017-01-01

We report a rare case of adenocarcinoma of the sphenoid sinus manifesting as extended skull base tumor. The patient included in the study was a 42-year old woman presenting with unilateral right symptomatology consisting of nasal obstruction, diplopia and hemifacial neuralgias. Clinical examination showed paralysis of the cranial nerve pairs V and VI. Brain scanner showed voluminous heterogeneous sphenoid and clival mass reaching the right cavernous sinus, with a peripheral tissue component at the level of the sphenoid sinus. Biopsy was performed under general anesthesia, through endonasal sphenoidotomy approach. Histological examination showed non-intestinal adenocarcinoma. The patient died due to impaired general condition occurred during examinations. Skull base adenocarcinomas mainly occur in the ethmoid bone. Sphenoid origin is exceptional. Radiological appearance is not specific and suggests malignancy. Diagnosis should be suspected in patients with aggressive tumor, even when it occurs in the midline skull base.

Properties and architecture of the sperm whale skull amphitheatre.

Science.gov (United States)

Alam, Parvez; Amini, Shahrouz; Tadayon, Maryam; Miserez, Ali; Chinsamy, Anusuya

2016-02-01

The sperm whale skull amphitheatre cradles an enormous two-tonne spermaceti organ. The amphitheatre separates this organ from the cranium and the cervical vertebrae that lie in close proximity to the base of the skull. Here, we elucidate that this skull amphitheatre is an elastic, flexible, triple-layered structure with mechanical properties that are conjointly guided by bone histology and the characteristics of pore space. We contend that the amphitheatre will flex elastically to equilibrate forces transmitted via the spermaceti organ that arise through diving. We find that collisions from sperm whale aggression do not cause the amphitheatre to bend, but rather localise stress to the base of the amphitheatre on its anterior face. We consider, therefore, that the uniquely thin and extended construction of the amphitheatre, has relevance as an energy absorptive structure in diving. Copyright © 2015 Elsevier GmbH. All rights reserved.

[A case of pycnodysostosis--observation of the skull by CT scan].

Science.gov (United States)

Anegawa, S; Bekki, Y; Furukawa, Y; Yokota, S; Torigoe, R

1987-07-01

A 13-year-old boy was presented to the Department of Neurosurgery, Saiseikai Fukuoka General Hospital for further examinations concerning abnormal findings in the skull radiogram taken when he struck his head. His physical features showed some characteristics the same as those of pycnodysostosis as follows--proportionate dwarfism, prominent forehead, short spoon-shaped fingers, bilateral exophthalmos. A skull radiogram revealed widely open cranial sutures with no healing of the fracture and craniotomy which was performed for an acute epidural hematoma 6 years ago. Furthermore, the mandible was hypoplastic with a virtual loss of mandibular angle. CT of the soft tissues showed somewhat dilated cortical sulci and ventricles without any structural abnormalities in the brain. CT of bone algorithm revealed specific characteristics of this disease. The paranasal sinuses were quite hypoplastic. Especially in the maxillary sinuses, frontal sinuses and mastoid air cells, none of developments of sinuses were noted, even though the middle and internal ear seemed to be normal. Moreover, the ethmoid and sphenoid sinuses were noted, although their developments were poor. The appearance of skull base was normal, including the inlets and outlets of cranial nerves or vessels and synchondroses. However, the density of the skull base, especially in the diploe, was higher than normal in Hansfield number. Furthermore, detailed measurements of skull base demonstrated that the skull base itself was also dwarfism. Pycnodysostosis is a generalized skeletal disease whose cardinal features are moderate generalized osteosclerosis and dwarfism. However, the detailed observation on the cranium by CT has not been reported. In our study, the development of sinuses in bones with intramembranous ossification are worse than that with endochondral ossification.(ABSTRACT TRUNCATED AT 250 WORDS)

Application of Thinned-Skull Cranial Window to Mouse Cerebral Blood Flow Imaging Using Optical Microangiography

Science.gov (United States)

Wang, Ruikang K.

2014-01-01

In vivo imaging of mouse brain vasculature typically requires applying skull window opening techniques: open-skull cranial window or thinned-skull cranial window. We report non-invasive 3D in vivo cerebral blood flow imaging of C57/BL mouse by the use of ultra-high sensitive optical microangiography (UHS-OMAG) and Doppler optical microangiography (DOMAG) techniques to evaluate two cranial window types based on their procedures and ability to visualize surface pial vessel dynamics. Application of the thinned-skull technique is found to be effective in achieving high quality images for pial vessels for short-term imaging, and has advantages over the open-skull technique in available imaging area, surgical efficiency, and cerebral environment preservation. In summary, thinned-skull cranial window serves as a promising tool in studying hemodynamics in pial microvasculature using OMAG or other OCT blood flow imaging modalities. PMID:25426632

Radiation-induced osteosarcoma of the jaw treated with skull base surgery

International Nuclear Information System (INIS)

Yamamoto, Misaki; Asato, Ryo; Torii, Hiroko; Kanda, Tomoko; Tamura, Yoshihiro; Hirano, Shigeru; Ito, Juichi; Tanaka, Shinzou

2009-01-01

Head and neck osteosarcomas are rare. A 33-year-old woman received radiation therapy for lymphoepithelioma of the epipharynx in her childhood. After twenty-two years, she presented with a swelling of the right cheek. We did a work up, and diagnosed her radiation-induced osteosarcoma of the jaw. We treated her with neoadjuvant chemotherapy, surgery including skull base resection, and adjuvant chemo-therapy. A small skin recurrence developed after one year, but it was resected under local anesthesia, and there have been no recurrences since. We think that skull base surgery with a combined approach is a useful method in therapy for osteosarcomas in the skull base region. (author)

[Development of a Striatal and Skull Phantom for Quantitative 123I-FP-CIT SPECT].

Science.gov (United States)

Ishiguro, Masanobu; Uno, Masaki; Miyazaki, Takuma; Kataoka, Yumi; Toyama, Hiroshi; Ichihara, Takashi

123 Iodine-labelled N-(3-fluoropropyl) -2β-carbomethoxy-3β-(4-iodophenyl) nortropane ( 123 I-FP-CIT) single photon emission computerized tomography (SPECT) images are used for differential diagnosis such as Parkinson's disease (PD). Specific binding ratio (SBR) is affected by scattering and attenuation in SPECT imaging, because gender and age lead to changes in skull density. It is necessary to clarify and correct the influence of the phantom simulating the the skull. The purpose of this study was to develop phantoms that can evaluate scattering and attenuation correction. Skull phantoms were prepared based on the measuring the results of the average computed tomography (CT) value, average skull thickness of 12 males and 16 females. 123 I-FP-CIT SPECT imaging of striatal phantom was performed with these skull phantoms, which reproduced normal and PD. SPECT images, were reconstructed with scattering and attenuation correction. SBR with partial volume effect corrected (SBR act ) and conventional SBR (SBR Bolt ) were measured and compared. The striatum and the skull phantoms along with 123 I-FP-CIT were able to reproduce the normal accumulation and disease state of PD and further those reproduced the influence of skull density on SPECT imaging. The error rate with the true SBR, SBR act was much smaller than SBR Bolt . The effect on SBR could be corrected by scattering and attenuation correction even if the skull density changes with 123 I-FP-CIT on SPECT imaging. The combination of triple energy window method and CT-attenuation correction method would be the best correction method for SBR act .

Evaluation of radiation dose received in skull radiographic examination

International Nuclear Information System (INIS)

Omer, Noora Elshiekh

2014-12-01

Diagnostic X-ray examination play an important role in the health care of the population. These examinations may involve significant irradiation of the patient and probably represent the largest mam-made source of radiation exposure for the population. This study was performed in Khartoum Teaching Hospital in period of January to June 2014. This study was performed to assess the effective dose (ED) received in skull radiographic examination and to analyze effective dose distributions among radiological department under study. The study was performed in Khartoum Teaching Hospital, covering two x-ray units and a sample of 50 patients. The following parameters were recorded: age, weight, height, body mass index (BMI) derived from weight (kg) and (height (m)) and exposure factors. The dose was measured for skull x-ray examinations. For effective dose calculation, the entrance surface dose (ESD) values were estimated from the x-ray tube output parameters for skull AP and lateral examinations. The ED values were then calculated from the obtained ESD values using IAEA calculation methods. Effective doses were calculated from energy imparted using ED conversion factors proposed were within the normal range of exposure. The mean ED values calculated were 3.03±0.08 and 4.23±0.61 for skull AP and lateral examination, respectively. Further studies are recommended with more number of patients and using more than two modalities for comparison. (Author)

Radiological and acetomorphine analysis of the symmetry and direction of evolution of skulls from some historic populations

International Nuclear Information System (INIS)

Gawlikowska-Sroka, A.

2006-01-01

Introduction: Asymmetry is a common phenomenon in nature. It is typical for the human body and for the skull as its part. Knowledge of asymmetry and normal anatomy, especially of variability which does not represent pathology but distinguishes individuals is the basis for correct interpretation of radiological findings concerning the skull both in research and diagnostic examinations widely performed in surgery, neurology, neurosurgery, internal medicine, or pediatrics. Analysis of fluctuating asymmetry reveals the influence of stress factors on human development and the ability of the organism to defend itself against stress.The aim of this work was to analyse the asymmetry of skulls from some historic populations and to describe changes in their anatomy over the ages. Material and methods: The material consisted of three skull groups: one contemporary with 82 skulls and two mediaeval (52 skulls from Cedynia and 77 skulls from Grodek on Bug). Direct measurements were done and the skull was X-rayed in the Posterior-Anterior and skull-base projections. Images were scanned and calibrated with MicroStation 95 Academic Edition software. Helmert's transformation with first-order polynomial was done to attain a suitable geometry. Vectorisation of axes and areas was performed on reference material. Using tools for measurement of vector elements, the distance between bilateral points of both sides of the skull were obtained. Data were analysed statistically. Results: The results of measurements were used to study the directional and fluctuating asymmetry. It was found that asymmetry of the skull was present in both historic populations. The following conclusions were drawn: changes in the distribution of directional and fluctuating asymmetry for individual dimensions have taken place over the ages. A high level of directional asymmetry in the facial part and fluctuating asymmetry in the calvaria is typical for contemporary skulls. The reverse is true for relations in the

Experimental Determination of Spinel/Melt, Olivine/Melt, and Pyroxene/Melt Partition Coefficients for Re, Ru, Pd, Au, and Pt

Science.gov (United States)

Righter, K.; Campbell, A. J.; Humayun, M.

2003-01-01

Experimental studies have identified spinels as important hosts phases for many of the highly siderophile elements (HSE). Yet experimental studies involving chromite or Cr-rich spinel have been lacking. Experimental studies of partitioning of HSEs between silicate, oxides and silicate melt are plagued by low solubilities and the presence of small metallic nuggets at oxygen fugacities relevant to magmas, which interfere with analysis of the phases of interest. We have circumvented these problems in two ways: 1) performing experiments at oxidized conditions, which are still relevant to natural systems but in which nuggets are not observed, and 2) analysis of run products with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), allowing a combination of high sensitivity and good spatial resolution.

Computed tomography of Paget disease of the skull versus fibrous dysplasia

International Nuclear Information System (INIS)

Tehranzadeh, J.; Anavim, A.; Pribram, H.W.; Fung Ying; Donohue, M.

1998-01-01

Objective. Radiologists are often challenged to review CT examinations of the skull without pertinent clinical information or plain radiographs. Skull lesions of fibrous dysplasia (FD) may often be confused with Paget disease (PD). The purpose of this article is to evaluate radiographic similarities and to find the signs that can differentiate PD from FD of the skull on head CT and to describe the CT imaging features of PD and FD. Design and patients. CT scans of the skull in eight cases of PD, 18 cases of FD (13 cases of skull and facial bones, five cases of only facial bones) and 10 normals were studied retrospectively. Results. Ten features were found to be similar in PD and FD and 10 other features were found to be dissimilar. The frequency of the 10 differentiating features was evaluated to determine their reliability in distinguishing one disorder from the other. The differentiating features in order of significance include: (1) ''groundglass'' appearance, (2) symmetry, (3) involvement of the paranasal sinuses, (4) thickness of the cranial cortices, (5) involvement of the sphenoid bone, (6) orbital involvement, (7) nasal cavity involvement, (8) presence of a soft tissue mass, (9) maxillary involvement, and (10) the presence of cyst-like changes. Conclusion. These 10 signs improve the radiologist's skill in differentiating FD and PD. (orig.)

Skull-base invasion of nasopharyngeal carcinoma: magnetic resonance imaging findings and therapeutic implications

International Nuclear Information System (INIS)

Nishioka, Takeshi; Shirato, Hiroki; Kagei, Kenji; Abe, Satoru; Hashimoto, Seiko; Ohmori, Keiichi; Yamazaki, Akira; Fukuda, Satoshi; Miyasaka, Kazuo

2000-01-01

Purpose: To evaluate the value of skull-base abnormality on MRI for predicting local recurrence in nasopharyngeal carcinoma. Materials and Methods: Between November 1988 and February 1997, 48 patients with NPC were examined with both MRI (1.5 T) and CT prior to radiation therapy. T classification (1987 UICC) based on physical examination and CT findings were T1 in 3 cases, T2 in 22, T3 in 9, and T4 in 14. On MRI, low-intensity tissue with Gd enhancement in the marrow of the skull was considered to be a suspicious finding of skull-base invasion. CT simulation was performed in all patients. The total dose to the primary tumor was 60-75 Gy (mean, 67 Gy). The mean follow-up period was 42 months. Results: All 14 T4 patients had abnormal tissue in the marrow of the skull base on MRI. Thirty-eight percent (13 of 34) of T1-3 patients were suspected to have skull-base invasion based on MRI (0% for T1, 27% [6 of 22] for T2, and 78% [7 of 9] for T3). The 5-year local control rate was significantly different between T1-3 and T4 tumors (97% vs. 69%, p < 0.025) but was not different by the presence of the MRI abnormality in the skull base. Conclusion: Skull-base invasion suspected solely by MRI does not relate to local recurrence provided that careful treatment planning is performed with the aid of MRI and CT simulator

Computer vision and soft computing for automatic skull-face overlay in craniofacial superimposition.

Science.gov (United States)

Campomanes-Álvarez, B Rosario; Ibáñez, O; Navarro, F; Alemán, I; Botella, M; Damas, S; Cordón, O

2014-12-01

Craniofacial superimposition can provide evidence to support that some human skeletal remains belong or not to a missing person. It involves the process of overlaying a skull with a number of ante mortem images of an individual and the analysis of their morphological correspondence. Within the craniofacial superimposition process, the skull-face overlay stage just focuses on achieving the best possible overlay of the skull and a single ante mortem image of the suspect. Although craniofacial superimposition has been in use for over a century, skull-face overlay is still applied by means of a trial-and-error approach without an automatic method. Practitioners finish the process once they consider that a good enough overlay has been attained. Hence, skull-face overlay is a very challenging, subjective, error prone, and time consuming part of the whole process. Though the numerical assessment of the method quality has not been achieved yet, computer vision and soft computing arise as powerful tools to automate it, dramatically reducing the time taken by the expert and obtaining an unbiased overlay result. In this manuscript, we justify and analyze the use of these techniques to properly model the skull-face overlay problem. We also present the automatic technical procedure we have developed using these computational methods and show the four overlays obtained in two craniofacial superimposition cases. This automatic procedure can be thus considered as a tool to aid forensic anthropologists to develop the skull-face overlay, automating and avoiding subjectivity of the most tedious task within craniofacial superimposition. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

A study on the particle melting by plasma spraying

International Nuclear Information System (INIS)

Jung, In Ha; Ji, C. G.; Bae, S. O.; Yoon, J. H.; Kwon, H. I.

2001-12-01

As a preliminary study for fabricating a thick and dense free standing type deposit, powder melting studies were carried out. Various morphologies and sizes of powder having the same chemical compositions were applied in particle melting experiments with varying systematic parameters. Through the study of powder melting by inductively coupled plasma, we can conclude as followings: Argon-hydrogen plasma gas with a higher plasma power gave good quality of splats and shown a higher density with a higher build-up rate. Reproducibility of the experiments appeared in the range of 99%. Degree of particle melting and its density just before impinging played a predominant role in the density of a deposit. Chamber pressure has an effect on degree of deformation of the splats, i.e. on the particle momentum. Completely melted particle showed a high deformation appearance. Build-up rate had a relation with a fraction of the fully melted particle, and this also closely associates with productivity and economical efficiency. For increasing the fraction of the fully melted particle, either increasing the power or limiting the particle size was recommended. Mean pore size and its distribution of a deposit seemed to have a relation with a viscosity of the melted powder, i.e. particle temperature, and also with a chamber pressure and spraying distances. Particle temperature may be governed by a plasma power, plasma gas property, probe position, and spraying distance in the present experimental range. Some results might be appeared with mutual interactions of the effects, for example, particle residence time and momentum with chamber pressure, particle temperature with chamber pressure, spraying distance and its size

A study on the particle melting by plasma spraying

Energy Technology Data Exchange (ETDEWEB)

Jung, In Ha; Ji, C. G.; Bae, S. O.; Yoon, J. H.; Kwon, H. I

2001-12-01

As a preliminary study for fabricating a thick and dense free standing type deposit, powder melting studies were carried out. Various morphologies and sizes of powder having the same chemical compositions were applied in particle melting experiments with varying systematic parameters. Through the study of powder melting by inductively coupled plasma, we can conclude as followings: Argon-hydrogen plasma gas with a higher plasma power gave good quality of splats and shown a higher density with a higher build-up rate. Reproducibility of the experiments appeared in the range of 99%. Degree of particle melting and its density just before impinging played a predominant role in the density of a deposit. Chamber pressure has an effect on degree of deformation of the splats, i.e. on the particle momentum. Completely melted particle showed a high deformation appearance. Build-up rate had a relation with a fraction of the fully melted particle, and this also closely associates with productivity and economical efficiency. For increasing the fraction of the fully melted particle, either increasing the power or limiting the particle size was recommended. Mean pore size and its distribution of a deposit seemed to have a relation with a viscosity of the melted powder, i.e. particle temperature, and also with a chamber pressure and spraying distances. Particle temperature may be governed by a plasma power, plasma gas property, probe position, and spraying distance in the present experimental range. Some results might be appeared with mutual interactions of the effects, for example, particle residence time and momentum with chamber pressure, particle temperature with chamber pressure, spraying distance and its size.

Leonardo da Vinci's "A skull sectioned": skull and dental formula revisited.

Science.gov (United States)

Gerrits, Peter O; Veening, Jan G

2013-05-01

What can be learned from historical anatomical drawings and how to incorporate these drawings into anatomical teaching? The drawing "A skull sectioned" (RL 19058v) by Leonardo da Vinci (1452-1519), hides more detailed information than reported earlier. A well-chosen section cut explores sectioned paranasal sinuses and ductus nasolacrimalis. A dissected lateral wall of the maxilla is also present. Furthermore, at the level of the foramen mentale, the drawing displays compact and spongious bony components, together with a cross-section through the foramen mentale and its connection with the canalis mandibulae. Leonardo was the first to describe a correct dental formula (6424) and made efforts to place this formula above the related dental elements. However, taking into account, the morphological features of the individual elements of the maxilla, it can be suggested that Leonardo sketched a "peculiar dental element" on the position of the right maxillary premolar in the dental sketch. The fact that the author did not make any comment on that special element is remarkable. Leonardo could have had sufficient knowledge of the precise morphology of maxillary and mandibular premolars, since the author depicted these elements in the dissected skull. The fact that the author also had access to premolars in situ corroborates our suggestion that "something went wrong" in this part of the drawing. The present study shows that historical anatomical drawings are very useful for interactive learning of detailed anatomy for students in medicine and dentistry. Copyright © 2012 Wiley Periodicals, Inc.

Skull base development and craniosynostosis

Energy Technology Data Exchange (ETDEWEB)

Blaser, Susan I. [The Hospital for Sick Children and University of Toronto, Department of Diagnostic Imaging, Division of Neuroradiology, Toronto (Canada); University of Toronto, Department of Otolaryngology - Head and Neck Surgery, Toronto (Canada); Padfield, Nancy [The Hospital for Sick Children and University of Toronto, Department of Diagnostic Imaging, Division of Neuroradiology, Toronto (Canada); Chitayat, David [The Hospital for Sick Children and University of Toronto, Division of Clinical and Metabolic Genetics, Toronto (Canada); Mount Sinai Hospital and University of Toronto, Prenatal Diagnosis and Medical Genetics Program, Toronto (Canada); Forrest, Christopher R. [The Hospital for Sick Children and University of Toronto, Centre for Craniofacial Care and Research, Division of Plastic and Reconstructive Surgery, Toronto (Canada)

2015-09-15

Abnormal skull shape resulting in craniofacial deformity is a relatively common clinical finding, with deformity either positional (positional plagiocephaly) or related to premature ossification and fusion of the skull sutures (craniosynostosis). Growth restriction occurring at a stenosed suture is associated with exaggerated growth at the open sutures, resulting in fairly predictable craniofacial phenotypes in single-suture non-syndromic pathologies. Multi-suture syndromic subtypes are not so easy to understand without imaging. Imaging is performed to define the site and extent of craniosynostosis, to determine the presence or absence of underlying brain anomalies, and to evaluate both pre- and postoperative complications of craniosynostosis. Evidence for intracranial hypertension may be seen both pre- and postoperatively, associated with jugular foraminal stenosis, sinovenous occlusion, hydrocephalus and Chiari 1 malformations. Following clinical assessment, imaging evaluation may include radiographs, high-frequency US of the involved sutures, low-dose (20-30 mAs) CT with three-dimensional reformatted images, MRI and nuclear medicine brain imaging. Anomalous or vigorous collateral venous drainage may be mapped preoperatively with CT or MR venography or catheter angiography. (orig.)

Repairing skull defects in children with nano-hap/collagen composites：A clinical report of thirteen cases

Institute of Scientific and Technical Information of China (English)

Tuoyu Chen; Fuzhai Cui; Yuqi Zhang; Huancong Zuo; Yapeng Zhao; Chaoqiang Xue; Bin Luo; Qinglin Zhang; Jin Zhu; Xiumei Wang

2016-01-01

Objective: To evaluate the clinical results of repairing skull defects with biomimetic bone (nano-hap/collagen composites, NHACs) in children. Methods:Thirteen children with skull defects were treated with NHACs in our hospital. The NHACs molded with the help of a 3D printer were used in the operations. Results: All 13 operations were successful, and patients recovered without infection. Only one patient suffered from subcutaneous hydrops post-operation. The implanted NHACs remained fixed well after 1 year, and their CT HU values raised gradually. Skull shapes of children developed normally. Recovery of neurological and cognitive function was significant. Conclusions:NHAC, chosen to repair skull defects in children, can coexist with normal skull and reduce the negative effects on growth and development. NHAC could be a good choice for children with skull defects.

Sex estimation in forensic anthropology: skull versus postcranial elements.

Science.gov (United States)

Spradley, M Katherine; Jantz, Richard L

2011-03-01

When the pelvis is unavailable, the skull is widely considered the second best indicator of sex. The goals of this research are to provide an objective hierarchy of sexing effectiveness of cranial and postcranial elements and to test the widespread notion that the skull is superior to postcranial bones. We constructed both univariate and multivariate discriminant models using data from the Forensic Anthropology Data Bank. Discriminating effectiveness was assessed by cross-validated classification, and in the case of multivariate models, Mahalanobis D(2). The results clearly indicate that most postcranial elements outperform the skull in estimating sex. It is possible to correctly sex 88-90% of individuals with joint size, up to 94% with multivariate models of the postcranial bones. The best models for the cranium do not exceed 90%. We conclude that postcranial elements are to be preferred to the cranium for estimating sex when the pelvis is unavailable. © 2011 American Academy of Forensic Sciences.

Skull base osteomyelitis: role of three phase and hybrid SPECT/CT bone scintigraphy

International Nuclear Information System (INIS)

Chakraborty, D.; Bhattacharaya, A.; Kamaleshwaran, K.K.; Mittal, B.R.; Aggarwal, K.; Singh, B.; Bhoil, A.

2010-01-01

Full text: Skull base osteomyelitis is the infection that has spread to the skull base, beyond the external auditory canal and seen in advanced stage of malignant otitis externa. Early diagnosis of this condition includes the use of bone scintigraphy since clinical assessment alone cannot differentiate the skull base osteomyelitis from the severe type of otitis externa in which there is no extension to the adjacent bone. Objective: To determine the role of three phase bone scintigraphy and delayed SPECT/CT in detection of skull base osteomyelitis in patients with malignant otitis externa. Material and Methods: Clinical records of 20 patients (14 Males and 6 Females; mean age 72 yrs) of otitis externa with suspected skull base involvement referred for bone scintigraphies were analyzed retrospectively. Three phase bone scintigraphy was acquired under dual detector gamma camera after intravenous injection of 20 mCi (740 MBq) 99m Tc-MDP followed by SPECT/CT of the skull. Scintigraphic findings were compared with clinical symptoms, signs and diagnostic CT scan findings. Results: All the patients except one were diabetic and having elevated ESR. 18 patients presented with bilateral symptoms and rest unilateral. Cranial nerves were involved in 8 patients (40%). Ear discharge culture sensitivity report was found in three patients; it was positive for Pseudomonas aeruginosa for two patients and in Diptheroids for one. In 9 patients (45%) increased flow of tracer and 10 patients (50%) increased blood pool phase in the temporal region was found. Delayed phase images showed increased uptake in skull bone in 19 patients (95%). Hybrid SPECT/CT of the skull localized areas of increased tracer uptake to the mastoid part in 15 patients (75%), petrous part in 11 patients (55%), sphenoid in 3 patients (15%) and zygomatic bone in one patient (5%) with CT showing destructive changes in 5 patients (25%) which were corroborated with diagnostic CT findings. SPECT/CT along with three phase

An historical skull collection and its use in forensic odontology and anthropology

DEFF Research Database (Denmark)

Sejrsen, B; Lynnerup, N; Hejmadi, M

2005-01-01

The Institute of Forensic Medicine, Copenhagen, houses a collection of historical skulls of unclear origin, marked with a general geographic or "racial descriptor". Would these historical skulls be of any value for the forensic odontologist and anthropologist concerned with teaching and casework?...

Cladding hull decontamination and densification process. Part 2. Densification by inductoslag melting

International Nuclear Information System (INIS)

Nelson, R.G.; Montgomery, D.R.

1980-04-01

The Inductoslag melting process was developed to densify Zircaloy-4 cladding hulls. It is a cold crucible process that uses induction heating, a segmented water-cooled copper crucible, and a calcium fluoride flux. Metal and flux are fed into the furnace through the crucible, located at the top of the furnace, and the finished ingot is withdrawn from the bottom of the furnace. Melting rates of 40 to 50 kg/h are achieved, using 100 to 110 kW at an average energy use of 2.5 kWh/kg. The quality of ingots produced from factory supplied cladding tubing is sufficient to satisfy nuclear grade standards. An ingot of Zircaloy-4, made from melted cladding tubing that had been autoclaved to near reactor exposure and then descaled by the hydrogen fluoride decontamination process prior to Inductoslag melting, did not meet nuclear grade standards because the hydrogen, nitrogen, and hardness levels were too high. Melting development work is described that could possibly be used to test the capability of the Inductoslag process to satisfactorily melt a variety and mix of materials from LWR reprocessing, decontamination, and storage options. Results of experiments are also presented that could be used to improve remote operation of the melting process

Cerebral Venous Air Embolism due to a Hidden Skull Fracture Secondary to Head Trauma

Directory of Open Access Journals (Sweden)

Ai Hosaka

2015-01-01

Full Text Available Cerebral venous air embolism is sometimes caused by head trauma. One of the paths of air entry is considered a skull fracture. We report a case of cerebral venous air embolism following head trauma. The patient was a 55-year-old man who fell and hit his head. A head computed tomography (CT scan showed the air in the superior sagittal sinus; however, no skull fractures were detected. Follow-up CT revealed a fracture line in the right temporal bone. Cerebral venous air embolism following head trauma might have occult skull fractures even if CT could not show the skull fractures.

Endoscopic skull base training using 3D printed models with pre-existing pathology.

Science.gov (United States)

Narayanan, Vairavan; Narayanan, Prepageran; Rajagopalan, Raman; Karuppiah, Ravindran; Rahman, Zainal Ariff Abdul; Wormald, Peter-John; Van Hasselt, Charles Andrew; Waran, Vicknes

2015-03-01

Endoscopic base of skull surgery has been growing in acceptance in the recent past due to improvements in visualisation and micro instrumentation as well as the surgical maturing of early endoscopic skull base practitioners. Unfortunately, these demanding procedures have a steep learning curve. A physical simulation that is able to reproduce the complex anatomy of the anterior skull base provides very useful means of learning the necessary skills in a safe and effective environment. This paper aims to assess the ease of learning endoscopic skull base exposure and drilling techniques using an anatomically accurate physical model with a pre-existing pathology (i.e., basilar invagination) created from actual patient data. Five models of a patient with platy-basia and basilar invagination were created from the original MRI and CT imaging data of a patient. The models were used as part of a training workshop for ENT surgeons with varying degrees of experience in endoscopic base of skull surgery, from trainees to experienced consultants. The surgeons were given a list of key steps to achieve in exposing and drilling the skull base using the simulation model. They were then asked to list the level of difficulty of learning these steps using the model. The participants found the models suitable for learning registration, navigation and skull base drilling techniques. All participants also found the deep structures to be accurately represented spatially as confirmed by the navigation system. These models allow structured simulation to be conducted in a workshop environment where surgeons and trainees can practice to perform complex procedures in a controlled fashion under the supervision of experts.

Osteomas of the skull. Comparison of magnetic resonance imaging and histological findings

Energy Technology Data Exchange (ETDEWEB)

Shibata, Yasushi; Matsumura, Akira; Yoshii, Yoshihiko; Nose, Tadao [Tsukuba Univ., Ibaraki (Japan). Inst. of Clinical Medicine

1995-01-01

Magnetic resonance (MR) images of five patients with osteomas of the skull and six patients with other primary skull tumors were reviewed. All osteomas appeared as low-intensity areas on T{sub 1}-weighted images. T{sub 2}-weighted images showed homogeneous low-intensity areas in two dense osteomas, a high-intensity area in one spongy osteoma, and mixed intensity areas in two mixed spongy and dense osteomas, respectively. The signal intensities of osteomas on T{sub 2}-weighted MR images correlated well with the histological findings. Other skull tumors showed no specific MR imaging appearance. (author).

Vacuum extraction as a treatment modality of neonatal skull depression in twin infant

International Nuclear Information System (INIS)

Amin, Adnan M.; Al-Zeky, Alaauddin M.; El-Azm, M.

2007-01-01

The management of depressed skull fractures in the newborn infant can be controversial. In this article, we report a case of twin pregnancy wherein one of the fetuses had depressed skull fractures that was not associated with any known trauma during the pregnancy or at delivery. This p ing-pong skull depression was treated by elevation with an obstetrical vacuum extractor. No complications occurred. The possible etiologies and treatment modalities for neonatal depressed fractures, being conservative or operative, are discussed. (author)

The Making of a Skull Base Team and the Value of Multidisciplinary Approach in the Management of Sinonasal and Ventral Skull Base Malignancies.

Science.gov (United States)

Snyderman, Carl H; Wang, Eric W; Fernandez-Miranda, Juan C; Gardner, Paul A

2017-04-01

The management of sinonasal and ventral skull base malignancies is best performed by a team. Although the composition of the team may vary, it is important to have multidisciplinary representation. There are multiple obstacles, both individual and institutional, that must be overcome to develop a highly functioning team. Adequate training is an important part of team-building and can be fostered with surgical telementoring. A quality improvement program should be incorporated into the activities of a skull base team. Copyright © 2016 Elsevier Inc. All rights reserved.

Radiological assessment of skull base changes in children with syndromic craniosynostosis: role of ''minor'' sutures

International Nuclear Information System (INIS)

Calandrelli, Rosalinda; D'Apolito, Gabriella; Gaudino, Simona; Stefanetti, Mariangela; Colosimo, Cesare; Massimi, Luca; Di Rocco, Concezio

2014-01-01

This study aims to identify the premature synostosis of ''major'' and ''minor'' sutures of the four ''sutural arches'' of the skull and to perform a morphometric analysis in children with syndromic craniosynostosis in order to evaluate changes in the skull base linked with premature suture synostosis. We reviewed multiplanar high-resolution CT images, implemented with 3D reconstructions, from 18 patients with complex syndromic craniosynostosis and compared them with 18 age-matched healthy subjects. We assessed the calvarial sutures and their extension to the skull base, and then we correlated specific types of synostosis with the size, shape and symmetry of the cranial fossae. We found a marked asymmetry of the skull base growth in all patients. The synostotic involvement around the coronal ring caused a reduction in the growth of the anterior and middle fossae. The size of the posterior cranial fossa was related not only to ''major'' but also to ''minor'' suture synostosis of the lambdoid and parieto-squamosal arches. Changes in the skull base and craniofacial axis symmetry are due to structural and functional relationships between ''major'' and ''minor'' skull sutures, suggesting a structural and functional relationship between the neurocranium and basicranium. The early recognition of prematurely closed skull base sutures may help clinicians and neurosurgeons to establish correct therapeutic approaches. (orig.)

Skull base tumor model.

Science.gov (United States)

Gragnaniello, Cristian; Nader, Remi; van Doormaal, Tristan; Kamel, Mahmoud; Voormolen, Eduard H J; Lasio, Giovanni; Aboud, Emad; Regli, Luca; Tulleken, Cornelius A F; Al-Mefty, Ossama

2010-11-01

Resident duty-hours restrictions have now been instituted in many countries worldwide. Shortened training times and increased public scrutiny of surgical competency have led to a move away from the traditional apprenticeship model of training. The development of educational models for brain anatomy is a fascinating innovation allowing neurosurgeons to train without the need to practice on real patients and it may be a solution to achieve competency within a shortened training period. The authors describe the use of Stratathane resin ST-504 polymer (SRSP), which is inserted at different intracranial locations to closely mimic meningiomas and other pathological entities of the skull base, in a cadaveric model, for use in neurosurgical training. Silicone-injected and pressurized cadaveric heads were used for studying the SRSP model. The SRSP presents unique intrinsic metamorphic characteristics: liquid at first, it expands and foams when injected into the desired area of the brain, forming a solid tumorlike structure. The authors injected SRSP via different passages that did not influence routes used for the surgical approach for resection of the simulated lesion. For example, SRSP injection routes included endonasal transsphenoidal or transoral approaches if lesions were to be removed through standard skull base approach, or, alternatively, SRSP was injected via a cranial approach if the removal was planned to be via the transsphenoidal or transoral route. The model was set in place in 3 countries (US, Italy, and The Netherlands), and a pool of 13 physicians from 4 different institutions (all surgeons and surgeons in training) participated in evaluating it and provided feedback. All 13 evaluating physicians had overall positive impressions of the model. The overall score on 9 components evaluated--including comparison between the tumor model and real tumor cases, perioperative requirements, general impression, and applicability--was 88% (100% being the best possible

Alignment of CT images of skull dysmorphology using anatomy-based perpendicular axes

International Nuclear Information System (INIS)

Yoo, Sun K; Kim, Yong O; Kim, Hee-Joung; Kim, Nam H; Jang, Young Beom; Kim, Kee-Deog; Lee, Hye-Yeon

2003-01-01

Rigid body registration of 3D CT scans, based on manual identification of homologous landmarks, is useful for the visual analysis of skull dysmorphology. In this paper, a robust and simple alignment method was proposed to allow for the comparison of skull morphologies, within and between individuals with craniofacial anomalies, based on 3D CT scans, and the minimum number of anatomical landmarks, under rigidity and uniqueness constraints. Three perpendicular axes, extracted from anatomical landmarks, define the absolute coordinate system, through a rigid body transformation, to align multiple CT images for different patients and acquisition times. The accuracy of the alignment method depends on the accuracy of the localized landmarks and target points. The numerical simulation generalizes the accuracy requirements of the alignment method. Experiments using a human dried skull specimen, and ten sets of skull CT images (the pre- and post-operative CT scans of four plagiocephaly, and one fibrous dysplasia patients), demonstrated the feasibility of the technique in clinical practice

A Comparative Taphonomic Analysis of 24 Trophy Skulls from Modern Forensic Cases.

Science.gov (United States)

Yucha, Josephine M; Pokines, James T; Bartelink, Eric J

2017-09-01

Cranial remains retained from fallen enemies are commonly referred to as "trophy skulls," and many such crania were acquired as souvenirs by U.S. servicemembers during WWII and the Vietnam conflict. These remains increasingly have become the subject of forensic anthropological analysis as their possessors, typically veterans or their relatives, try to discard or repatriate them. The present research uses a qualitative analytical approach to review 24 cases of reported trophy skulls (14 previously unpublished cases and 10 from the literature) to determine which perimortem and postmortem characteristics are most useful for generating a taphonomic profile. Overall, the taphonomic signature of trophy remains includes traits relating to acquisition and preparation, ornamental display, and subsequent curation. Contextual evidence and the biological profile also are considered when determining the possible origin of human cranial remains as a trophy skull. Thorough taphonomic analysis will aid in identifying these types of remains as trophy skulls. © 2017 American Academy of Forensic Sciences.

One Stage Reconstruction of Skull Exposed by Burn Injury Using a Tissue Expansion Technique

Directory of Open Access Journals (Sweden)

Jae Young Cho

2012-03-01

Full Text Available BackgroundAn area of the skull exposed by burn injury has been covered by various methods including local flap, skin graft, or free flap surgery. Each method has disadvantages, such as postoperative alopecia or donor site morbidities. Due to the risk of osteomyelitis in the injured skull during the expansion period, tissue expansion was excluded from primary reconstruction. However, successful primary reconstruction was possible in burned skull by tissue expansion.MethodsFrom January 2000 to 2011, tissue expansion surgery was performed on 10 patients who had sustained electrical burn injuries. In the 3 initial cases, removal of the injured part of the skull and a bone graft was performed. In the latter 7 cases, the injured skull tissue was preserved and covered with a scalp flap directly to obtain natural bone healing and bone remodeling.ResultsThe mean age of patients was 49.9±12.2 years, with 8 male and 2 female. The size of the burn wound was an average of 119.6±36.7 cm2. The mean expansion duration was 65.5±5.6 days, and the inflation volume was an average of 615±197.6 mL. Mean defect size was 122.2±34.9 cm2. The complications including infection, hematoma, and the exposure of the expander were observed in 4 cases. Nonetheless, only 1 case required revision.ConclusionsSuccessful coverage was performed by tissue expansion surgery in burned skull primarily and no secondary reconstruction was needed. Although the risks of osteomyelitis during the expansion period were present, constant coverage of the injured skull and active wound treatment helped successful primary reconstruction of burned skull by tissue expansion.

Avian skull morphological evolution: exploring exo- and endocranial covariation with two-block partial least squares.

Science.gov (United States)

Marugán-Lobón, Jesús; Buscalioni, Angela D

2006-01-01

While rostral variation has been the subject of detailed avian evolutionary research, avian skull organization, characterized by a flexed or extended appearance of the skull, has eventually become neglected by mainstream evolutionary inquiries. This study aims to recapture its significance, evaluating possible functional, phylogenetic and developmental factors that may be underlying it. In order to estimate which, and how, elements of the skull intervene in patterning the skull we tested the statistical interplay between a series of old mid-sagittal angular measurements (mostly endocranial) in combination with newly obtained skull metrics based on landmark superimposition methods (exclusively exocranial shape), by means of the statistic-morphometric technique of two-block partial least squares. As classic literature anticipated, we found that the external appearance of the skull corresponds to the way in which the plane of the caudal cranial base is oriented, in connection with the orientations of the plane of the foramen magnum and of the lateral semicircular canal. The pattern of covariation found between metrics conveys flexed or extended appearances of the skull implicitly within a single and statistically significant dimension of covariation. Marked shape changes with which angles covary concentrate at the supraoccipital bone, the cranial base and the antorbital window, whereas the plane measuring the orientation of the anterior portion of the rostrum does not intervene. Statistical covariance between elements of the caudal cranial base and the occiput inplies that morphological integration underlies avian skull macroevolutionary organization as a by-product of the regional concordance of such correlated elements within the early embryonic chordal domain of mesodermic origin.

Osteometrical and CT examination of the Japanese wolf [Canis hodophilax] skull

International Nuclear Information System (INIS)

Endo, H.; Obara, I.; Yoshida, T.; Kurohmaru, M.; Hayshi, Y.; Suzuki, N.

1997-01-01

The skulls of Japanese wolf (Canis hodophilax) were osteometrically examined and compared with those of Akita-Inu. The skull total length was not statistically different between two species. However, significant differences were demonstrated between two species in some ratios concerning the frontal bone. CT examination was carried out in the Japanese wolf skull. The data indicated that the frontal sinus is not be largely developed and compressed in the dorso-ventral direction in parasagittal area. The narrow frontal sinus fitted to external shape of the frontal bone. The cribriform plate had a well-developed complicated structure in a caudal part of the ethmoid bone. These data will be useful to examine the respiratory function and the olfactory sense in the Japanese wolf

STUDY ON NORTHERN AND SOUTHERN INDIA VARIATIONS OF HUMAN SKULL- A SECONDARY RESEARCH

Directory of Open Access Journals (Sweden)

Jameskutty Baby Jacob Kaithackal

2016-12-01

Full Text Available BACKGROUND Identity of a human being with regard to sex, race, age etc. can be revealed if the skull is suitably examined. The general concept of ethnic and geographic variations being reflected in the body as variations in size, shape, etc. can be checked for in the case of skeleton also. This article is formed out of a term paper study submitted by myself in 2016 to the Yenepoya University, Mangalore, Karnataka, as part of the postgraduate diploma course in Forensic Anthropology. The research was based on a question whether there is a significant difference between human skulls from North and South India. The aims/objectives were bi-fold: to analyse the difference in male and female skull from North Indian and South Indian regions from review of scholarly literature and to explore the possibility identification of individuals from cranial features unique to North and South India. MATERIALS AND METHODS The original articles available on this type of work were extensively reviewed to recognise any traits that differentiated the skulls with regard to their regional variation. RESULTS At the end of the scrutiny of such papers, a summary of the features that distinguished skulls as belonging to northern or southern parts of India was tried. The Indian cranial series, though varied widely in shape, the absence of any statistically significant difference between them made it unreliable to predict skull as male or female by morphometric estimation. The studies by different scholars did not propose for a uniform distinctiveness between north and south Indian skulls. CONCLUSION It was concluded that analysing a single specimen to be of a distinct geographic origin should be done more cautiously when compared to a setting of series analysis where variability might be there of course.

Estimation of skull table thickness with clinical CT and validation with microCT.

Science.gov (United States)

Lillie, Elizabeth M; Urban, Jillian E; Weaver, Ashley A; Powers, Alexander K; Stitzel, Joel D

2015-01-01

Brain injuries resulting from motor vehicle crashes (MVC) are extremely common yet the details of the mechanism of injury remain to be well characterized. Skull deformation is believed to be a contributing factor to some types of traumatic brain injury (TBI). Understanding biomechanical contributors to skull deformation would provide further insight into the mechanism of head injury resulting from blunt trauma. In particular, skull thickness is thought be a very important factor governing deformation of the skull and its propensity for fracture. Current computed tomography (CT) technology is limited in its ability to accurately measure cortical thickness using standard techniques. A method to evaluate cortical thickness using cortical density measured from CT data has been developed previously. This effort validates this technique for measurement of skull table thickness in clinical head CT scans using two postmortem human specimens. Bone samples were harvested from the skulls of two cadavers and scanned with microCT to evaluate the accuracy of the estimated cortical thickness measured from clinical CT. Clinical scans were collected at 0.488 and 0.625 mm in plane resolution with 0.625 mm thickness. The overall cortical thickness error was determined to be 0.078 ± 0.58 mm for cortical samples thinner than 4 mm. It was determined that 91.3% of these differences fell within the scanner resolution. Color maps of clinical CT thickness estimations are comparable to color maps of microCT thickness measurements, indicating good quantitative agreement. These data confirm that the cortical density algorithm successfully estimates skull table thickness from clinical CT scans. The application of this technique to clinical CT scans enables evaluation of cortical thickness in population-based studies. © 2014 Anatomical Society.

Three-dimensional stereotactic atlas of the adult human skull correlated with the brain, cranial nerves, and intracranial vasculature.

Science.gov (United States)

Nowinski, Wieslaw L; Thaung, Thant Shoon Let; Chua, Beng Choon; Yi, Su Hnin Wut; Ngai, Vincent; Yang, Yili; Chrzan, Robert; Urbanik, Andrzej

2015-05-15

Although the adult human skull is a complex and multifunctional structure, its 3D, complete, realistic, and stereotactic atlas has not yet been created. This work addresses the construction of a 3D interactive atlas of the adult human skull spatially correlated with the brain, cranial nerves, and intracranial vasculature. The process of atlas construction included computed tomography (CT) high-resolution scan acquisition, skull extraction, skull parcellation, 3D disarticulated bone surface modeling, 3D model simplification, brain-skull registration, 3D surface editing, 3D surface naming and color-coding, integration of the CT-derived 3D bony models with the existing brain atlas, and validation. The virtual skull model created is complete with all 29 bones, including the auditory ossicles (being among the smallest bones). It contains all typical bony features and landmarks. The created skull model is superior to the existing skull models in terms of completeness, realism, and integration with the brain along with blood vessels and cranial nerves. This skull atlas is valuable for medical students and residents to easily get familiarized with the skull and surrounding anatomy with a few clicks. The atlas is also useful for educators to prepare teaching materials. It may potentially serve as a reference aid in the reading and operating rooms. Copyright © 2015 Elsevier B.V. All rights reserved.

Dog behavior co-varies with height, bodyweight and skull shape.

Science.gov (United States)

McGreevy, Paul D; Georgevsky, Dana; Carrasco, Johanna; Valenzuela, Michael; Duffy, Deborah L; Serpell, James A

2013-01-01

Dogs offer unique opportunities to study correlations between morphology and behavior because skull shapes and body shape are so diverse among breeds. Several studies have shown relationships between canine cephalic index (CI: the ratio of skull width to skull length) and neural architecture. Data on the CI of adult, show-quality dogs (six males and six females) were sourced in Australia along with existing data on the breeds' height, bodyweight and related to data on 36 behavioral traits of companion dogs (n = 8,301) of various common breeds (n = 49) collected internationally using the Canine Behavioral Assessment and Research Questionnaire (C-BARQ). Stepwise backward elimination regressions revealed that, across the breeds, 33 behavioral traits all but one of which are undesirable in companion animals correlated with either height alone (n = 14), bodyweight alone (n = 5), CI alone (n = 3), bodyweight-and-skull shape combined (n = 2), height-and-skull shape combined (n = 3) or height-and-bodyweight combined (n = 6). For example, breed average height showed strongly significant inverse relationships (psensitivity, urination when left alone, dog-directed fear, separation-related problems, non-social fear, defecation when left alone, owner-directed aggression, begging for food, urine marking and attachment/attention-seeking, while bodyweight showed strongly significant inverse relationships (p<0.001) with excitability and being reported as hyperactive. Apart from trainability, all regression coefficients with height were negative indicating that, across the breeds, behavior becomes more problematic as height decreases. Allogrooming increased strongly (p<0.001) with CI and inversely with height. CI alone showed a strong significant positive relationship with self-grooming (p<0.001) but a negative relationship with chasing (p = 0.020). The current study demonstrates how aspects of CI (and therefore brain shape), bodyweight and height co-vary with behavior. The

Evolutionary morphology of the rabbit skull

Directory of Open Access Journals (Sweden)

Brian Kraatz

2016-09-01

Full Text Available The skull of leporids (rabbits and hares is highly transformed, typified by pronounced arching of the dorsal skull and ventral flexion of the facial region (i.e., facial tilt. Previous studies show that locomotor behavior influences aspects of cranial shape in leporids, and here we use an extensive 3D geometric morphometrics dataset to further explore what influences leporid cranial diversity. Facial tilt angle, a trait that strongly correlates with locomotor mode, significantly predicts the cranial shape variation captured by the primary axis of cranial shape space, and describes a small proportion (13.2% of overall cranial shape variation in the clade. However, locomotor mode does not correlate with overall cranial shape variation in the clade, because there are two district morphologies of generalist species, and saltators and cursorial species have similar morphologies. Cranial shape changes due to phyletic size change (evolutionary allometry also describes a small proportion (12.5% of cranial shape variation in the clade, but this is largely driven by the smallest living leporid, the pygmy rabbit (Brachylagus idahoensis. By integrating phylogenetic history with our geometric morphometric data, we show that the leporid cranium exhibits weak phylogenetic signal and substantial homoplasy. Though these results make it difficult to reconstruct what the ‘ancestral’ leporid skull looked like, the fossil records suggest that dorsal arching and facial tilt could have occurred before the origin of the crown group. Lastly, our study highlights the diversity of cranial variation in crown leporids, and highlights a need for additional phylogenetic work that includes stem (fossil leporids and includes morphological data that captures the transformed morphology of rabbits and hares.

Reconstruction for Skull Base Defect Using Fat-Containing Perifascial Areolar Tissue.

Science.gov (United States)

Choi, Woo Young; Sung, Ki Wook; Kim, Young Seok; Hong, Jong Won; Roh, Tai Suk; Lew, Dae Hyun; Chang, Jong Hee; Lee, Kyu Sung

2017-06-01

Skull base reconstruction is a challenging task. The method depends on the anatomical complexity and size of the defect. We obtained tissue by harvesting fat-containing perifascial areolar tissue (PAT) for reconstruction of limited skull base defects and volume augmentation. We demonstrated the effective option for reconstruction of limited skull base defects and volume augmentation. From October 2013 to November 2015, 5 patients underwent operations using fat-containing PAT to fill the defect in skull base and/or perform volume replacement in the forehead. Perifascial areolar tissue with 5- to 10-mm fat thickness was harvested from the inguinal region. The fat-containing PAT was grafted to the defect contacting the vascularized wound bed. Patients were followed up in terms of their clinical symptoms and postoperative magnetic resonance imaging findings. Four patients were treated using fat-containing PAT after tumor resection. One patient was treated for a posttraumatic forehead depression deformity. The fat-containing PAT included 5- to 9-mm fat thickness in all cases. The mean size of grafted PAT was 65.6 cm (28-140 cm). The mean follow-up period was 18.6 months (12-31 months). There was no notable complication. There was no donor site morbidity. We can harvest PAT with fat easily and obtain the sufficient volume to treat the defect. It also could be used with other reconstructive method, such as a free flap or a regional flap to fill the left dead space. Therefore, fat-containing PAT could be additional options to reconstruction of skull base defect.

Petrological Geodynamics of Mantle Melting II. AlphaMELTS + Multiphase Flow: Dynamic Fractional Melting

Science.gov (United States)

Tirone, Massimiliano

2018-03-01

In this second installment of a series that aims to investigate the dynamic interaction between the composition and abundance of the solid mantle and its melt products, the classic interpretation of fractional melting is extended to account for the dynamic nature of the process. A multiphase numerical flow model is coupled with the program AlphaMELTS, which provides at the moment possibly the most accurate petrological description of melting based on thermodynamic principles. The conceptual idea of this study is based on a description of the melting process taking place along a 1-D vertical ideal column where chemical equilibrium is assumed to apply in two local sub-systems separately on some spatial and temporal scale. The solid mantle belongs to a local sub-system (ss1) that does not interact chemically with the melt reservoir which forms a second sub-system (ss2). The local melt products are transferred in the melt sub-system ss2 where the melt phase eventually can also crystallize into a different solid assemblage and will evolve dynamically. The main difference with the usual interpretation of fractional melting is that melt is not arbitrarily and instantaneously extracted from the mantle, but instead remains a dynamic component of the model, hence the process is named dynamic fractional melting (DFM). Some of the conditions that may affect the DFM model are investigated in this study, in particular the effect of temperature, mantle velocity at the boundary of the mantle column. A comparison is made with the dynamic equilibrium melting (DEM) model discussed in the first installment. The implications of assuming passive flow or active flow are also considered to some extent. Complete data files of most of the DFM simulations, four animations and two new DEM simulations (passive/active flow) are available following the instructions in the supplementary material.

An Anatomic Morphological Study of Occipital Spurs in Human Skulls.

Science.gov (United States)

Srivastava, Monika; Asghar, Adil; Srivastava, Nitya Nand; Gupta, Nandkishore; Jain, Anuj; Verma, Jayant

2018-01-01

Occipital spurs are quite common; however, they are also the source of frequent discomfort to the patients. Their role has been implicated in causation of pain at the base of skull, which may extend to shoulder limiting the movement of the shoulder and neck. The present was carried out to find out the prevalence of occipital spur in human skull and to find out the anatomic morphological characteristics of occipital spur. A total of 30 cadaveric skulls were examined in the Department of Anatomy, Uttar Pradesh University of Medical Sciences, for the presence of occipital spur. These skulls were the part of boneset obtained as a part of undergraduate training in the department. All the measurements were taken using a digital Vernier Caliper after taking all necessary precaution to avoid any damage to these spurs. The prevalence of occipital spur in the present study was 10%. The mean width recorded in the present study was 13.40 mm (±6.7) and the mean length recorded was 13.45 mm (±1.05). Similarly, mean thickness noted was 2.43 mm (±0.43). Thus, the present study concludes that occipital spurs are the frequent source of discomfort to patients. The knowledge of this tubercle is of paramount importance to neurosurgeons, sports physicians, and radiologists for the diagnosis of such discomfort.

Fungal Infection of the Sinus and Anterior Skull Base

Directory of Open Access Journals (Sweden)

Morteza Javadi

2008-11-01

Full Text Available   Abstract   Background: Invasive fungal infection is an opportunistic infection caused commonly   by mucoraccae and aspergillus. It mostly occurs in patients with underlying disease.   Since it has a high mortality and morbidity rate, considering a treatment strategy seems   necessary.   Objective: Since there has not been a clear protocol for treating these patients, we decided   to establish a protocol for fungal infection of sinus and anterior skull base management.   Methods: This retrospective and descriptive case study series included 30 patients.   After confirming the pathogen, the authors came to a proper protocol for treatment which   is mentioned later.   Results: The site involvement included nose and orbital cavity (53.3%, anterior skull   base and brain in conjunction with sinonasal (36.6% and simple nasal cavity involvement   (10%. 86.6% of the patients had underlying diseases. 56.6% of patients had diabetes   as a single underlying disease, while 13.3% had both diabetes and renal failure in   combination. Acute lymphocytic leukemia was present in 6.6%, renal failure in 3.3%, lupus   in 3.3% and chronic lymphocytic leukemia in 3.3% of patients. Mortality rate was   40%. We categorized the patients into 3 groups: only sinonasal, sinonasal and orbit, and   associated anterior skull base and brain involvement.   Conclusion: Early diagnosis is an important factor in improving survival. Anterior   skull base and brain involvement has a very poor prognosis.  

Development of a Post-Processing Algorithm for Accurate Human Skull Profile Extraction via Ultrasonic Phased Arrays

Science.gov (United States)

Al-Ansary, Mariam Luay Y.

Ultrasound Imaging has been favored by clinicians for its safety, affordability, accessibility, and speed compared to other imaging modalities. However, the trade-offs to these benefits are a relatively lower image quality and interpretability, which can be addressed by, for example, post-processing methods. One particularly difficult imaging case is associated with the presence of a barrier, such as a human skull, with significantly different acoustical properties than the brain tissue as the target medium. Some methods were proposed in the literature to account for this structure if the skull's geometry is known. Measuring the skull's geometry is therefore an important task that requires attention. In this work, a new edge detection method for accurate human skull profile extraction via post-processing of ultrasonic A-Scans is introduced. This method, referred to as the Selective Echo Extraction algorithm, SEE, processes each A-Scan separately and determines the outermost and innermost boundaries of the skull by means of adaptive filtering. The method can also be used to determine the average attenuation coefficient of the skull. When applied to simulated B-Mode images of the skull profile, promising results were obtained. The profiles obtained from the proposed process in simulations were found to be within 0.15lambda +/- 0.11lambda or 0.09 +/- 0.07mm from the actual profiles. Experiments were also performed to test SEE on skull mimicking phantoms with major acoustical properties similar to those of the actual human skull. With experimental data, the profiles obtained with the proposed process were within 0.32lambda +/- 0.25lambda or 0.19 +/- 0.15mm from the actual profile.

CT and magnetic resonance imaging finding of lipomatous hemanioperisytoma of skull base: A case report

Energy Technology Data Exchange (ETDEWEB)

Park, Hee Girl; Yu, In Kyu; Kim, Han Kyu; Kim, Seung Min; Kang, Dong Wook [Eulji University Hospital, Daejeon (Korea, Republic of)

2013-07-15

Lipomatous hemangiopericytoma (LHPC) is recently recognized as a rare hemangiopericytoma variant. To our knowledge, imaging features of LHPC involving skull base have not yet been reported. We present the imaging features of LHPC of skull base in a 44-year-old female, along with a literature review CT and magnetic resonance imagings showed well-enhanced fatty issues containing temporal skull base masses, with pressure bony erosions.

The Maturation of Skulls in Postnatal Risso’s Dolphins (Grampus griseus from Taiwanese Waters

Directory of Open Access Journals (Sweden)

Ing Chen

2011-09-01

Full Text Available The degree of fusion between bones is a useful indicator of skeletal and sexual maturity for cetacean specimens preserved in museum collections. The aim of this study was twofold: first, to examine the degree of fusion between bony elements in skulls of Risso’s dolphins (Grampus griseus Cuvier, 1812 from Taiwanese waters; and second, to analyze the relationship between skull maturity, body length, sexual maturity, and estimated age, with the aim of determining a useful skull predictor for maturity in Risso’s dolphins. The stage of fusion of 20 superficial sutures or joints between selected skull bones was examined on 33 clean, dry skulls, which were salvaged from stranded or bycaught dead Risso’s dolphins in Taiwanese waters during the years of 1994 – 2001. The bones of the caudoventral braincase fused early in development (basioccipital-exoccipital synchondrosis, supraoccipital- exoccipital suture, whereas fusion along the nuchal crest (fronto-interparietal and fronto-parietal sutures occurred later. Some sutures remained open in some adult specimens (lacrimal/maxilla-frontal, squamosal-parietal, squamosal-exoccipital sutures, and the intermandibular symphysis. Bilateral asymmetry of the fusion process was not detected. Advanced fusion occurred in the fronto-interparietal suture along the medial aspect of the nuchal crest, and in the rostral nasal-frontal and distal maxilla-incisive sutures at total body length > 250 cm, and may be useful skull indicators of sexual maturity.

The ecological origins of snakes as revealed by skull evolution.

Science.gov (United States)

Da Silva, Filipe O; Fabre, Anne-Claire; Savriama, Yoland; Ollonen, Joni; Mahlow, Kristin; Herrel, Anthony; Müller, Johannes; Di-Poï, Nicolas

2018-01-25

The ecological origin of snakes remains amongst the most controversial topics in evolution, with three competing hypotheses: fossorial; marine; or terrestrial. Here we use a geometric morphometric approach integrating ecological, phylogenetic, paleontological, and developmental data for building models of skull shape and size evolution and developmental rate changes in squamates. Our large-scale data reveal that whereas the most recent common ancestor of crown snakes had a small skull with a shape undeniably adapted for fossoriality, all snakes plus their sister group derive from a surface-terrestrial form with non-fossorial behavior, thus redirecting the debate toward an underexplored evolutionary scenario. Our comprehensive heterochrony analyses further indicate that snakes later evolved novel craniofacial specializations through global acceleration of skull development. These results highlight the importance of the interplay between natural selection and developmental processes in snake origin and diversification, leading first to invasion of a new habitat and then to subsequent ecological radiations.

Performance of computed tomography of the head to evaluate for skull fractures in infants with suspected non-accidental trauma

Energy Technology Data Exchange (ETDEWEB)

Culotta, Paige A.; Tran, Quynh-Anh; Donaruma-Kwoh, Marcella [Texas Children' s Hospital, Section of Public Health Pediatrics, Baylor College of Medicine, Houston, TX (United States); Crowe, James E.; Jones, Jeremy Y.; Mehollin-Ray, Amy R.; Tran, H.B.; Dodge, Cristina T. [Texas Children' s Hospital, The Edward B. Singleton, MD, Department of Pediatric Radiology, Baylor College of Medicine, Houston, TX (United States); Camp, Elizabeth A. [Texas Children' s Hospital, Emergency Medicine, Department of Pediatrics, Baylor College of Medicine, Houston, TX (United States); Cruz, Andrea T. [Texas Children' s Hospital, Emergency Medicine, Department of Pediatrics, Baylor College of Medicine, Houston, TX (United States); Texas Children' s Hospital, Infectious Diseases, Department of Pediatrics, Baylor College of Medicine, Houston, TX (United States)

2017-01-15

Young children with suspected abusive head trauma often receive skull radiographs to evaluate for fractures as well as computed tomography (CT) of the head to assess for intracranial injury. Using a CT as the primary modality to evaluate both fracture and intracranial injury could reduce exposure to radiation without sacrificing performance. To evaluate the sensitivity of CT head with (3-D) reconstruction compared to skull radiographs to identify skull fractures in children with suspected abusive head trauma. This was a retrospective (2013-2014) cross-sectional study of infants evaluated for abusive head trauma via both skull radiographs and CT with 3-D reconstruction. The reference standard was skull radiography. All studies were read by pediatric radiologists and neuroradiologists, with ten percent read by a second radiologist to evaluate for interobserver reliability. One hundred seventy-seven children (47% female; mean/median age: 5 months) were included. Sixty-two (35%) had skull fractures by radiography. CT with 3-D reconstruction was 97% sensitive (95% confidence interval [CI]: 89-100%) and 94% specific (CI: 87-97%) for skull fracture. There was no significant difference between plain radiographs and 3-D CT scan results (P-value = 0.18). Kappa was 1 (P-value <0.001) between radiologist readings of CTs and 0.77 (P = 0.001) for skull radiographs. CT with 3-D reconstruction is equivalent to skull radiographs in identifying skull fractures. When a head CT is indicated, skull radiographs add little diagnostic value. (orig.)

Experimental study of transmission of a pulsed focused beam through a skull phantom in nonlinear regime

International Nuclear Information System (INIS)

Tsysar, S. A.; Nikolaeva, A. V.; Khokhlova, V. A.; Yuldashev, P. V.; Svet, V. D.; Sapozhnikov, O. A.

2015-01-01

In the paper the use of receiving and radiating system, which allows to determine the parameters of bone by nonlinear pulse-echo technique and to image of brain structures through the skull bones, was proposed. Accuracy of the skull bone characterization is due to higher measured harmonic and is significantly better than in linear case. In the experimental part focused piezoelectric transducer with diameter 100 mm, focal distance 100 mm, the frequency of 1.092 MHz was used. It was shown that skull bone profiling can be performed with the use of 3rd harmonic since 1st harmonic can be used for visualization of the underlying objects. The use of wideband systems for both skull profiling and brain visualization is restricted by skull attenuation and resulting low effective sensitivity

Experimental study of transmission of a pulsed focused beam through a skull phantom in nonlinear regime

Energy Technology Data Exchange (ETDEWEB)

Tsysar, S. A., E-mail: sergey@acs366.phys.msu.ru; Nikolaeva, A. V.; Khokhlova, V. A.; Yuldashev, P. V. [Physics Faculty, Moscow State University, Leninskie Gory, Moscow 119991 (Russian Federation); Svet, V. D. [Andreyev Acoustics Institute, 4, Shvernik Street, Moscow 117036 (Russian Federation); Sapozhnikov, O. A. [Physics Faculty, Moscow State University, Leninskie Gory, Moscow 119991 (Russian Federation); Center for Industrial and Medical Ultrasound, Applied Physics Laboratory, University of Washington, 1013 NE 40th Street, Seattle, WA 98105 (United States)

2015-10-28

In the paper the use of receiving and radiating system, which allows to determine the parameters of bone by nonlinear pulse-echo technique and to image of brain structures through the skull bones, was proposed. Accuracy of the skull bone characterization is due to higher measured harmonic and is significantly better than in linear case. In the experimental part focused piezoelectric transducer with diameter 100 mm, focal distance 100 mm, the frequency of 1.092 MHz was used. It was shown that skull bone profiling can be performed with the use of 3rd harmonic since 1st harmonic can be used for visualization of the underlying objects. The use of wideband systems for both skull profiling and brain visualization is restricted by skull attenuation and resulting low effective sensitivity.

[The anatomy of a reduced skull model--visualisation of Leonardo da Vinci's anthropology].

Science.gov (United States)

Ahner, E

2008-04-02

The article focuses on a rare example of a miniature skull of unknown origin. The profoundness of the anatomical details, conjoint with outstanding virtuosity, reminds of Leonardo da Vinci's anatomical skull studies and asks for additional interpretation beside the emblematic "memento mori"-character. Following the miscellaneous topics of his skull studies an anatomical-anthropological interpretation is proposed. For such a project the mergence of anthropology, history of medicine and history of art was mandatory. Concerning some discrepancies within the anatomical realism, the depiction of a pathology is discussed and beyond the visualisation of a historic concept of brain function.

Skull lichens: a curious chapter in the history of phytotherapy.

Science.gov (United States)

Modenesi, P

2009-04-01

Lichens growing on skulls were known in late medieval times as usnea or moss of a dead man's skull and were recommended as highly beneficial in various diseases. They were, in addition, the main ingredient of Unguentum armariun, a liniment used in a curious medical practice: the magnetic cure of wounds. We can place this chapter of the history of phytotherapy within the wider cultural context of the period, which saw the definition of nature become increasingly more fluid and open to a variety of novel interpretations.

Non-human primate skull effects on the cavitation detection threshold of FUS-induced blood-brain barrier opening

Science.gov (United States)

Wu, Shih-Ying; Tung, Yao-Sheng; Marquet, Fabrice; Chen, Cherry C.; Konofagou, Elisa E.

2012-11-01

Microbubble (MB)-assisted focused ultrasound is a promising technique for delivering drugs to the brain by noninvasively and transiently opening the blood-brain barrier (BBB), and monitoring BBB opening using passive cavitation detection (PCD) is critical in detecting its occurrence, extent as well as assessing its mechanism. One of the main obstacles in achieving those objectives in large animals is the transcranial attenuation. To study the effects, the cavitation response through the in-vitro non-human primate (NHP) skull was investigated. In-house manufactured lipid-shelled MB (medium diameter: 4-5 um) were injected into a 4-mm channel of a phantom below a degassed monkey skull. A hydrophone confocally aligned with the FUS transducer served as PCD during sonication (frequency: 0.50 MHz, peak rarefactional pressures: 0.05-0.60 MPa, pulse length: 100 cycles, PRF: 10 Hz, duration: 2 s) for four cases: water without skull, water with skull, MB without skull and MB with skull. A 5.1-MHz linear-array transducer was also used to monitor the MB disruption. The frequency spectra, spectrograms, stable cavitation dose (SCD) and inertial cavitation dose (ICD) were quantified. Results showed that the onset of stable cavitation and inertial cavitation in the experiments occurred at 50 kPa, and was detectable throught the NHP skull since the both the detection thresholds for stable cavitation and inertial cavitation remained unchanged compared to the non-skull case, and the SCD and ICD acquired transcranially may not adequately represent the true extent of stable and inertial cavitation due to the skull attenuation.

Scalp and skull influence on near infrared photon propagation in the Colin27 brain template.

Science.gov (United States)

Strangman, Gary E; Zhang, Quan; Li, Zhi

2014-01-15

Near-infrared neuromonitoring (NIN) is based on near-infrared spectroscopy (NIRS) measurements performed through the intact scalp and skull. Despite the important effects of overlying tissue layers on the measurement of brain hemodynamics, the influence of scalp and skull on NIN sensitivity are not well characterized. Using 3555 Monte Carlo simulations, we estimated the sensitivity of individual continuous-wave NIRS measurements to brain activity over the entire adult human head by introducing a small absorption perturbation to brain gray matter and quantifying the influence of scalp and skull thickness on this sensitivity. After segmenting the Colin27 template into five tissue types (scalp, skull, cerebrospinal fluid, gray matter and white matter), the average scalp thickness was 6.9 ± 3.6 mm (range: 3.6-11.2mm), while the average skull thickness was 6.0 ± 1.9 mm (range: 2.5-10.5mm). Mean NIN sensitivity - defined as the partial path length through gray matter divided by the total photon path length - ranged from 0.06 (i.e., 6% of total path length) at a 20mm source-detector separation, to over 0.19 at 50mm separations. NIN sensitivity varied substantially around the head, with occipital pole exhibiting the highest NIRS sensitivity to gray matter, whereas inferior frontal regions had the lowest sensitivity. Increased scalp and skull thickness were strongly associated with decreased sensitivity to brain tissue. Scalp thickness always exhibited a slightly larger effect on sensitivity than skull thickness, but the effect of both varied with SD separation. We quantitatively characterize sensitivity around the head as well as the effects of scalp and skull, which can be used to interpret NIN brain activation studies as well as guide the design, development and optimization of NIRS devices and sensors. Copyright © 2013 Elsevier Inc. All rights reserved.

GLASS MELTING PHENOMENA, THEIR ORDERING AND MELTING SPACE UTILISATION

Directory of Open Access Journals (Sweden)

Němec L.

2013-12-01

Full Text Available Four aspects of effective glass melting have been defined – namely the fast kinetics of partial melting phenomena, a consideration of the melting phenomena ordering, high utilisation of the melting space, and effective utilisation of the supplied energy. The relations were defined for the specific melting performance and specific energy consumption of the glass melting process which involve the four mentioned aspects of the process and indicate the potentials of effective melting. The quantity “space utilisation” has been treated in more detail as an aspect not considered in practice till this time. The space utilisation was quantitatively defined and its values have been determined for the industrial melting facility by mathematical modelling. The definitions of the specific melting performance and specific energy consumption have been used for assessment of the potential impact of a controlled melt flow and high space utilisation on the melting process efficiency on the industrial scale. The results have shown that even the partial control of the melt flow, leading to the partial increase of the space utilisation, may considerably increase the melting performance, whereas a decrease of the specific energy consumption was determined to be between 10 - 15 %.

Functional Imaging of Human Vestibular Cortex Activity Elicited by Skull Tap and Auditory Tone Burst

Science.gov (United States)

Noohi, Fatemeh; Kinnaird, Catherine; Wood, Scott; Bloomberg, Jacob; Mulavara, Ajitkumar; Seidler, Rachael

2014-01-01

The aim of the current study was to characterize the brain activation in response to two modes of vestibular stimulation: skull tap and auditory tone burst. The auditory tone burst has been used in previous studies to elicit saccular Vestibular Evoked Myogenic Potentials (VEMP) (Colebatch & Halmagyi 1992; Colebatch et al. 1994). Some researchers have reported that airconducted skull tap elicits both saccular and utricle VEMPs, while being faster and less irritating for the subjects (Curthoys et al. 2009, Wackym et al., 2012). However, it is not clear whether the skull tap and auditory tone burst elicit the same pattern of cortical activity. Both forms of stimulation target the otolith response, which provides a measurement of vestibular function independent from semicircular canals. This is of high importance for studying the vestibular disorders related to otolith deficits. Previous imaging studies have documented activity in the anterior and posterior insula, superior temporal gyrus, inferior parietal lobule, pre and post central gyri, inferior frontal gyrus, and the anterior cingulate cortex in response to different modes of vestibular stimulation (Bottini et al., 1994; Dieterich et al., 2003; Emri et al., 2003; Schlindwein et al., 2008; Janzen et al., 2008). Here we hypothesized that the skull tap elicits the similar pattern of cortical activity as the auditory tone burst. Subjects put on a set of MR compatible skull tappers and headphones inside the 3T GE scanner, while lying in supine position, with eyes closed. All subjects received both forms of the stimulation, however, the order of stimulation with auditory tone burst and air-conducted skull tap was counterbalanced across subjects. Pneumatically powered skull tappers were placed bilaterally on the cheekbones. The vibration of the cheekbone was transmitted to the vestibular cortex, resulting in vestibular response (Halmagyi et al., 1995). Auditory tone bursts were also delivered for comparison. To validate

Proton therapy for tumors of the skull base

Energy Technology Data Exchange (ETDEWEB)

Munzenrider, J.E.; Liebsch, N.J. [Dept. of Radiation Oncology, Harvard Univ. Medical School, Boston, MA (United States)

1999-06-01

Charged particle beams are ideal for treating skull base and cervical spine tumors: dose can be focused in the target, while achieving significant sparing of the brain, brain stem, cervical cord, and optic nerves and chiasm. For skull base tumors, 10-year local control rates with combined proton-photon therapy are highest for chondrosarcomas, intermediate for male chordomas, and lowest for female chordomas (94%, 65%, and 42%, respectively). For cervical spine tumors, 10-year local control rates are not significantly different for chordomas and chondrosarcomas (54% and 48%, respectively), nor is there any difference in local control between males and females. Observed treatment-related morbidity has been judged acceptable, in view of the major morbidity and mortality which accompany uncontrolled tumor growth. (orig.)

Proton therapy for tumors of the skull base

International Nuclear Information System (INIS)

Munzenrider, J.E.; Liebsch, N.J.

1999-01-01

Charged particle beams are ideal for treating skull base and cervical spine tumors: dose can be focused in the target, while achieving significant sparing of the brain, brain stem, cervical cord, and optic nerves and chiasm. For skull base tumors, 10-year local control rates with combined proton-photon therapy are highest for chondrosarcomas, intermediate for male chordomas, and lowest for female chordomas (94%, 65%, and 42%, respectively). For cervical spine tumors, 10-year local control rates are not significantly different for chordomas and chondrosarcomas (54% and 48%, respectively), nor is there any difference in local control between males and females. Observed treatment-related morbidity has been judged acceptable, in view of the major morbidity and mortality which accompany uncontrolled tumor growth. (orig.)

Cooling systems for efficient operation of induction heating installations; Kuehlsysteme fuer den effizienten Betrieb von Induktionsschmelzanlagen

Energy Technology Data Exchange (ETDEWEB)

Doetsch, Erwin; Schmidt, Juergen [ABP Induction Systems GmbH, Dortmund (Germany)

2009-12-15

Electrical and thermal losses in the system components of induction melting systems are mainly carried off by the cooling water. The design and maintenance of the corresponding cooling systems play a decisive role in the operating reliability of induction installations. Due to the differing requirements made on water quality, cooling of the furnace and the electrical components is generally accomplished by means of two independent cooling circuits, which are described below. The article also examines utilization of waste-heat, which has a particular significance for energy-efficiency, since more than a fourth of the furnace power, in the case of melting of ferrous materials, and more than half, in the case of non-ferrous materials, is lost. (orig.)

Evolutionary origin of the turtle skull.

Science.gov (United States)

Bever, G S; Lyson, Tyler R; Field, Daniel J; Bhullar, Bhart-Anjan S

2015-09-10

Transitional fossils informing the origin of turtles are among the most sought-after discoveries in palaeontology. Despite strong genomic evidence indicating that turtles evolved from within the diapsid radiation (which includes all other living reptiles), evidence of the inferred transformation between an ancestral turtle with an open, diapsid skull to the closed, anapsid condition of modern turtles remains elusive. Here we use high-resolution computed tomography and a novel character/taxon matrix to study the skull of Eunotosaurus africanus, a 260-million-year-old fossil reptile from the Karoo Basin of South Africa, whose distinctive postcranial skeleton shares many unique features with the shelled body plan of turtles. Scepticism regarding the status of Eunotosaurus as the earliest stem turtle arises from the possibility that these shell-related features are the products of evolutionary convergence. Our phylogenetic analyses indicate strong cranial support for Eunotosaurus as a critical transitional form in turtle evolution, thus fortifying a 40-million-year extension to the turtle stem and moving the ecological context of its origin back onto land. Furthermore, we find unexpected evidence that Eunotosaurus is a diapsid reptile in the process of becoming secondarily anapsid. This is important because categorizing the skull based on the number of openings in the complex of dermal bone covering the adductor chamber has long held sway in amniote systematics, and still represents a common organizational scheme for teaching the evolutionary history of the group. These discoveries allow us to articulate a detailed and testable hypothesis of fenestral closure along the turtle stem. Our results suggest that Eunotosaurus represents a crucially important link in a chain that will eventually lead to consilience in reptile systematics, paving the way for synthetic studies of amniote evolution and development.

Melting of fuel element racks and their recycling as granulate

International Nuclear Information System (INIS)

Quade, U.; Kluth, T.; Kreh, R.

1998-01-01

In order to increase the storage capacity for spent fuel elements in the Spanish NPPs of Almaraz and Asco, the existing racks were replaced by compact one in 1991/1993. The 28 racks from Almaraz NPP were cut on site, packed in 200-I-drums and taken to intermediate storage. For the remaining 28 racks of Asco NPP, ENRESA preferred the melting alternative. To demonstrate the recycling path melting in Germany, a test campaign with six racks was performed in 1997. As a result of this test melt, the limits for Carla melting plant were modified to 200 Bq/g total, α, β, γ 100 Bq/g nuclear fuels, max. 3g/100 kg 2,000 Bq/g total Fe55, H 3 , C-14 and Ni63. After the test melt campaign, the German authorities licensed the import and treatment of the remaining 22 racks on the condition that the waste resulting from the melting process as well as the granules produced were taken back to Spain. The shipment from Asco via France to Germany has been carried out in F 20-ft-IPII containers in accordance with ADR. Size reduction to chargeable dimensions was carried out by a plasma burner and hydraulic shears. For melting, a 3.2 Mg medium frequency induction furnace, operated in a separate housing, was used. For granules production outside this housing, the liquid iron was cast into a 5Mg ladle and then, through a water jet, into the granulating basin. The total mass of 287,659 Kg of 28 fuel elements racks and components of the storage basin yielded 297,914 kg of iron granulate. Secondary waste from melting amounted to 9,920 kg, corresponding to 3.45% of the input mass. The granulating process produced 6,589 kg, corresponding to 2.28% of the total mass to be melted. Radiological analysis of samples taken from the melt and different waste components confirmed the main nuclides Co60, Cs134 and Cs137. Fe55 was highly overestimated by the preliminary analysis. (Author) 2 refs

Effects of the freezing and thawing process on biomechanical properties of the human skull.

Science.gov (United States)

Torimitsu, Suguru; Nishida, Yoshifumi; Takano, Tachio; Koizumi, Yoshinori; Hayakawa, Mutsumi; Yajima, Daisuke; Inokuchi, Go; Makino, Yohsuke; Motomura, Ayumi; Chiba, Fumiko; Iwase, Hirotaro

2014-03-01

The aim of this study was to determine if biomechanical investigations of skull samples are reliable after skulls have been subjected to a freezing and thawing process. The skulls were obtained from 105 Japanese cadavers (66 males, 39 females) of known age that were autopsied in our department between October 2012 and June 2013. We obtained bone specimens from eight sites (four bilaterally symmetrical pairs) of each skull and measured the mass of each specimen. They were then classified into three groups (A, B, C) based on the duration of freezing of the experimental samples. The left-side samples were subjected to frozen storage (experimental group). The corresponding right-side samples were their controls. Bending tests were performed on the controls immediately after they were obtained. The experimental samples were preserved by refrigeration at -20 °C for 1 day (group A), 1 month (group B), or 3 months (group C). Following refrigeration, these samples were placed at 37 °C to thaw for 1 h and then were subjected to bending tests using a three-point-bending apparatus attached to a Handy force gauge. The device recorded the fracture load automatically when the specimen fractured. Statistical analyses revealed that there were no significant differences in sample fracture loads between the frozen preserved/thawed samples and the unfrozen controls for each of the cryopreservation intervals. We eliminated any possible sample mass bias by using controls from the same skull in each case. The results suggest that the freezing/thawing process has little effect on the mechanical properties of human skulls. Thus, frozen storage for up to 3 months is a good method for preserving human skulls. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

The relationship between skull morphology, masticatory muscle force and cranial skeletal deformation during biting.

Science.gov (United States)

Toro-Ibacache, Viviana; Zapata Muñoz, Víctor; O'Higgins, Paul

2016-01-01

The human skull is gracile when compared to many Middle Pleistocene hominins. It has been argued that it is less able to generate and withstand high masticatory forces, and that the morphology of the lower portion of the modern human face correlates most strongly with dietary characteristics. This study uses geometric morphometrics and finite element analysis (FEA) to assess the relationship between skull morphology, muscle force and cranial deformations arising from biting, which is relevant in understanding how skull morphology relates to mastication. The three-dimensional skull anatomies of 20 individuals were reconstructed from medical computed tomograms. Maximal contractile muscle forces were estimated from muscular anatomical cross-sectional areas (CSAs). Fifty-nine landmarks were used to represent skull morphology. A partial least squares analysis was performed to assess the association between skull shape and muscle force, and FEA was used to compare the deformation (strains) generated during incisor and molar bites in two individuals representing extremes of morphological variation in the sample. The results showed that only the proportion of total muscle CSA accounted for by the temporalis appears associated with skull morphology, albeit weekly. However, individuals with a large temporalis tend to possess a relatively wider face, a narrower, more vertically oriented maxilla and a lower positioning of the coronoid process. The FEAs showed that, despite differences in morphology, biting results in similar modes of deformation for both crania, but with localised lower magnitudes of strains arising in the individual with the narrowest, most vertically oriented maxilla. Our results suggest that the morphology of the maxilla modulates the transmission of forces generated during mastication to the rest of the cranium by deforming less in individuals with the ability to generate proportionately larger temporalis muscle forces. Copyright © 2015 Elsevier GmbH. All

Interspecific variation of ontogeny and skull shape among porpoises (Phocoenidae)

DEFF Research Database (Denmark)

Galatius-Jørgensen, Anders; Berta, Annalisa; Frandsen, Marie Michele Schou

2011-01-01

. dioptrica, for which large series were available, were further compared in terms of ontogeny of cranial shape by three-dimensional geometric morphometrics. Ph. dalli and P. dioptrica generally showed further development of cranial sutures than the other species. Postnatal skull shape development was similar...... was detected; in species with pelagic preference the position and orientation of the foramen magnum aligned the skull with the vertebral column; the rostrum showed less ventral inclination, and the facial region was larger and more concave in lateral aspect. J. Morphol., 2011. © 2010 Wiley-Liss, Inc....

The Growing-Skull Fracture of Childhood

African Journals Online (AJOL)

A Black female, aged 2 months, was brought to the hospital on 20 January 1973, after being dropped from a ... A Black male, aged 16 months, was referred from. Butterworth in the Transkei, because his mother had ... Alajouanine and Thurel,' that at least some of the holes found in ancient skulls, long cited by archaeologists ...

Development of incineration and incineration-melting system for radioactive incombustible wastes

International Nuclear Information System (INIS)

Karita, Y.; Kanagawa, Y.; Teshima, T.

2000-01-01

Radioactive combustible solid wastes produced by nuclear power plants are generally incinerated for the purpose of volume reduction and stabilization. However incombustible wastes, such as PVC and rubber wastes are not incinerated and are still being stored since the off-gas treatment problems of a large amount of soot and harmful HCl and SO x gas need to be resolved. The authors have developed a new types of incineration system which consists of a water-cooling jacket type incinerator, ceramic filter, HEPA and wet scrubber. And as an application of its incinerator, the hybrid incineration-melting furnace, which is a unification of the incinerator and induction melting furnace, is being tested. Furthermore, the new type of dry absorber for removing HCl and SO x is also being tested. This report mainly describes an outline and the test results of the above incineration system, and secondly, the possibility of the incineration-melting system and dry absorber. (author)

Three-dimensional reconstruction used in the diagnosis and treatment of depressed fracture of skull

International Nuclear Information System (INIS)

Li Liang; Luo Zhikun; Lin Xiaohui; Liu Shuyi; Chen Xu; Liu Chenghui

2005-01-01

Objective: To evaluate three-dimensional reconstruction used in the diagnosis and management of depressed fracture of skull. Methods: The images of CT scan and three-dimensional reconstruction in 23 patients with depressed fracture of skull were studied. The clinical treatment was guided by the images. Results: The fracture site and depth in all 23 cases were well demonstrated in the imaging of three-dimensional reconstruction, which successfully guided the clinical management in every case. Conclusion: Three-dimensional reconstruction is a valuable modality for the diagnosis and management of depressed fracture of skull. (authors)

Dog behavior co-varies with height, bodyweight and skull shape.

Directory of Open Access Journals (Sweden)

Paul D McGreevy

Full Text Available Dogs offer unique opportunities to study correlations between morphology and behavior because skull shapes and body shape are so diverse among breeds. Several studies have shown relationships between canine cephalic index (CI: the ratio of skull width to skull length and neural architecture. Data on the CI of adult, show-quality dogs (six males and six females were sourced in Australia along with existing data on the breeds' height, bodyweight and related to data on 36 behavioral traits of companion dogs (n = 8,301 of various common breeds (n = 49 collected internationally using the Canine Behavioral Assessment and Research Questionnaire (C-BARQ. Stepwise backward elimination regressions revealed that, across the breeds, 33 behavioral traits all but one of which are undesirable in companion animals correlated with either height alone (n = 14, bodyweight alone (n = 5, CI alone (n = 3, bodyweight-and-skull shape combined (n = 2, height-and-skull shape combined (n = 3 or height-and-bodyweight combined (n = 6. For example, breed average height showed strongly significant inverse relationships (p<0.001 with mounting persons or objects, touch sensitivity, urination when left alone, dog-directed fear, separation-related problems, non-social fear, defecation when left alone, owner-directed aggression, begging for food, urine marking and attachment/attention-seeking, while bodyweight showed strongly significant inverse relationships (p<0.001 with excitability and being reported as hyperactive. Apart from trainability, all regression coefficients with height were negative indicating that, across the breeds, behavior becomes more problematic as height decreases. Allogrooming increased strongly (p<0.001 with CI and inversely with height. CI alone showed a strong significant positive relationship with self-grooming (p<0.001 but a negative relationship with chasing (p = 0.020. The current study demonstrates how aspects of CI (and therefore brain shape

Petrological Geodynamics of Mantle Melting I. AlphaMELTS + Multiphase Flow: Dynamic Equilibrium Melting, Method and Results

Directory of Open Access Journals (Sweden)

Massimiliano Tirone

2017-10-01

Full Text Available The complex process of melting in the Earth's interior is studied by combining a multiphase numerical flow model with the program AlphaMELTS which provides a petrological description based on thermodynamic principles. The objective is to address the fundamental question of the effect of the mantle and melt dynamics on the composition and abundance of the melt and the residual solid. The conceptual idea is based on a 1-D description of the melting process that develops along an ideal vertical column where local chemical equilibrium is assumed to apply at some level in space and time. By coupling together the transport model and the chemical thermodynamic model, the evolution of the melting process can be described in terms of melt distribution, temperature, pressure and solid and melt velocities but also variation of melt and residual solid composition and mineralogical abundance at any depth over time. In this first installment of a series of three contributions, a two-phase flow model (melt and solid assemblage is developed under the assumption of complete local equilibrium between melt and a peridotitic mantle (dynamic equilibrium melting, DEM. The solid mantle is also assumed to be completely dry. The present study addresses some but not all the potential factors affecting the melting process. The influence of permeability and viscosity of the solid matrix are considered in some detail. The essential features of the dynamic model and how it is interfaced with AlphaMELTS are clearly outlined. A detailed and explicit description of the numerical procedure should make this type of numerical models less obscure. The general observation that can be made from the outcome of several simulations carried out for this work is that the melt composition varies with depth, however the melt abundance not necessarily always increases moving upwards. When a quasi-steady state condition is achieved, that is when melt abundance does not varies significantly

Multi-atlas and label fusion approach for patient-specific MRI based skull estimation.

Science.gov (United States)

Torrado-Carvajal, Angel; Herraiz, Joaquin L; Hernandez-Tamames, Juan A; San Jose-Estepar, Raul; Eryaman, Yigitcan; Rozenholc, Yves; Adalsteinsson, Elfar; Wald, Lawrence L; Malpica, Norberto

2016-04-01

MRI-based skull segmentation is a useful procedure for many imaging applications. This study describes a methodology for automatic segmentation of the complete skull from a single T1-weighted volume. The skull is estimated using a multi-atlas segmentation approach. Using a whole head computed tomography (CT) scan database, the skull in a new MRI volume is detected by nonrigid image registration of the volume to every CT, and combination of the individual segmentations by label-fusion. We have compared Majority Voting, Simultaneous Truth and Performance Level Estimation (STAPLE), Shape Based Averaging (SBA), and the Selective and Iterative Method for Performance Level Estimation (SIMPLE) algorithms. The pipeline has been evaluated quantitatively using images from the Retrospective Image Registration Evaluation database (reaching an overlap of 72.46 ± 6.99%), a clinical CT-MR dataset (maximum overlap of 78.31 ± 6.97%), and a whole head CT-MRI pair (maximum overlap 78.68%). A qualitative evaluation has also been performed on MRI acquisition of volunteers. It is possible to automatically segment the complete skull from MRI data using a multi-atlas and label fusion approach. This will allow the creation of complete MRI-based tissue models that can be used in electromagnetic dosimetry applications and attenuation correction in PET/MR. © 2015 Wiley Periodicals, Inc.

Temporalis muscle hypertrophy and reduced skull eccentricity in Duchenne muscular dystrophy.

Science.gov (United States)

Straathof, C S M; Doorenweerd, N; Wokke, B H A; Dumas, E M; van den Bergen, J C; van Buchem, M A; Hendriksen, J G M; Verschuuren, J J G M; Kan, H E

2014-10-01

Muscle hypertrophy and muscle weakness are well known in Duchenne muscular dystrophy. Decreased muscle force can have secondary effects on skeletal growth and development such as facial and dental morphology changes. In this study, we quantified temporal muscle thickness, circumference, and eccentricity of the skull and the head on T1-weighted magnetic resonance imaging (MRI) scans of the head of 15 Duchenne muscular dystrophy patients and 15 controls. Average temporal muscle thickness was significantly increased in patients (12.9 ± 5.2 mm) compared to controls (6.8 ± 1.4 mm) (P muscle thickness and skull eccentricity were significantly negatively correlated in patients, and positively in controls. Hypertrophy of the temporal muscles and changes in skull eccentricity appear to occur early in the course of Duchenne muscular dystrophy. Further studies in younger patients are needed to confirm a causal relationship. © The Author(s) 2014.

Teamwork in skull base surgery: An avenue for improvement in patient care.

Science.gov (United States)

McLaughlin, Nancy; Carrau, Ricardo L; Kelly, Daniel F; Prevedello, Daniel M; Kassam, Amin B

2013-01-01

During the past several decades, numerous centers have acquired significant expertise in the treatment of skull base pathologies. Favorable outcomes are not only due to meticulous surgical planning and execution, but they are also related to the collaborative efforts of multiple disciplines. We review the impact of teamwork on patient care, elaborate on the key processes for successful teamwork, and discuss its challenges. Pubmed and Medline databases were searched for publications from 1970 to 2012 using the following keywords: "teamwork", "multidisciplinary", "interdisciplinary", "surgery", "skull base", "neurosurgery", "tumor", and "outcome". Current literature testifies to the complexity of establishing and maintaining teamwork. To date, few reports on the impact of teamwork in the management of skull base pathologies have been published. This lack of literature is somewhat surprising given that most patients with skull base pathology receive care from multiple specialists. Common factors for success include a cohesive and well-integrated team structure with well-defined procedural organization. Although a multidisciplinary work force has clear advantages for improving today's quality of care and propelling research efforts for tomorrow's cure, teamwork is not intuitive and requires training, guidance, and executive support. Teamwork is recommended to improve quality over the full cycle of care and consequently patient outcomes. Increased recognition of the value of an integrated team approach for skull base pathologies will hopefully encourage centers, physicians, allied health caregivers, and scientists devoted to treating these patients and advancing the field of knowledge to invest the time, effort, and resources to optimize and organize their collective expertise.

3D shape recovery of a newborn skull using thin-plate splines.

Science.gov (United States)

Lapeer, R J; Prager, R W

2000-01-01

The objective of this paper is to construct a mesh-model of a newborn skull for finite element analysis to study its deformation when subjected to the forces present during labour. The current state of medical imaging technology has reached a level which allows accurate visualisation and shape recovery of biological organs and body-parts. However, a sufficiently large set of medical images cannot always be obtained, often because of practical or ethical reasons, and the requirement to recover the shape of the biological object of interest has to be met by other means. Such is the case for a newborn skull. A method to recover the three-dimensional (3D) shape from (minimum) two orthogonal atlas images of the object of interest and a homologous object is described. This method is based on matching landmarks and curves on the orthogonal images of the object of interest with corresponding landmarks and curves on the homologous or 'master'-object which is fully defined in 3D space. On the basis of this set of corresponding landmarks, a thin-plate spline function can be derived to warp from the 'master'-object space to the 'slave'-object space. This method is applied to recover the 3D shape of a newborn skull. Images from orthogonal view-planes are obtained from an atlas. The homologous object is an adult skull, obtained from CT-images made available by the Visible Human Project. After shape recovery, a mesh-model of the newborn skull is generated.

How We Got Here: Evolutionary Changes in Skull Shape in Humans & Their Ancestors

Science.gov (United States)

Price, Rebecca M.

2012-01-01

This activity uses inquiry to investigate how large changes in shape can evolve from small changes in the timing of development. Students measure skull shape in fetal, infant, juvenile, and adult chimpanzees and compare them to adult skulls of "Homo sapiens," "Homo erectus," and "Australopithecus afarensis." They conclude by re-interpreting their…

Conceptual transitions in methods of skull-photo superimposition that impact the reliability of identification: a review.

Science.gov (United States)

Jayaprakash, Paul T

2015-01-01

Establishing identification during skull-photo superimposition relies on correlating the salient morphological features of an unidentified skull with those of a face-image of a suspected dead individual using image overlay processes. Technical progression in the process of overlay has included the incorporation of video cameras, image-mixing devices and software that enables real-time vision-mixing. Conceptual transitions occur in the superimposition methods that involve 'life-size' images, that achieve orientation of the skull to the posture of the face in the photograph and that assess the extent of match. A recent report on the reliability of identification using the superimposition method adopted the currently prevalent methods and suggested an increased rate of failures when skulls were compared with related and unrelated face images. The reported reduction in the reliability of the superimposition method prompted a review of the transition in the concepts that are involved in skull-photo superimposition. The prevalent popular methods for visualizing the superimposed images at less than 'life-size', overlaying skull-face images by relying on the cranial and facial landmarks in the frontal plane when orienting the skull for matching and evaluating the match on a morphological basis by relying on mix-mode alone are the major departures in the methodology that may have reduced the identification reliability. The need to reassess the reliability of the method that incorporates the concepts which have been considered appropriate by the practitioners is stressed. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Skull Base Osteomyelitis from Otitis Media Presenting as the Collet-Sicard Syndrome

Directory of Open Access Journals (Sweden)

Wong-Kein Low

2018-01-01

Full Text Available Skull base osteomyelitis can involve the jugular foramen and its associated cranial nerves resulting in specific clinical syndromes. The Collet-Sicard syndrome describes the clinical manifestations of palsies involving cranial nerves IX, X, XI, and XII. We present a rare atypical case of skull base osteomyelitis originating from infection of the middle ear and causing the Collet-Sicard syndrome. Caused by Pseudomonas aeruginosa and Klebsiella pneumoniae, this occurred in an elderly diabetic man subsequent to retention of a cotton swab in an ear with chronic suppurative otitis media. This case report illustrates the possibility of retained cotton swabs contributing to the development of otitis media, skull base osteomyelitis, and ultimately the Collet-Sicard syndrome in the ears of immune-compromised patients with chronically perforated eardrums.

Comparison of SPECT and CT in detecting skull base invasion in nasopharyngeal carcinoma

International Nuclear Information System (INIS)

Zhang Li; Wang Jinchuan; Pu Nuo; Song Wenzhong; Chen Mingxi

2002-01-01

Objective: To investigate the detecting ability of single photon emission computed tomography (SPECT) and CT in skull base invasion in nasopharyngeal carcinoma. Methods: Sixty-three patients with nasopharyngeal carcinoma were examined by whole body and skull base SPECT and CT of nasopharynx and skull base before radiotherapy. The results were double-blind compared and evaluated. Results: The overall positive rates of skull base invasion detected by SPECT and CT were 63.5% and 25.4%. In patients with headache, cranial nerve palsy and both, they were 87.9%, 93.3%, 92.3% and 42.4%, 46.7%, 46.2%. In patients with T 1 + T 2 and T 3 + T 4 lesions, they were 37.5%, 90.3% and 0.0%, 51.6%. In patients with N 0 + N 1 and N 2 + N 3 lesions, they were 63.9%, 63.0% and 19.4%, 33.3%. The positive rates of SPECT were higher than those of CT (McNemar Test, P < 0.05). The conformation rate between SPECT and CT was 61.9% and the dissimilitude rate was 38.1%. Binary Logistic regression analysis showed that headache and T stages were risk factors of positive SPECT rate (ORheadache = 3.864, ORTstage= 6.422) while Tstage and Nstage were the risk factors for positive CT rate (ORTstage = 48.932, ORNstage = 2.860). Conclusions: The detection sensitivity of SPECT in skull base invasion in nasopharyngeal carcinoma is superior to that of CT. But its specificity is inferior to that of CT. The detecting results in SPECT are better related to symptoms, signs and stage. Combining headache and cranial nerve palsy with T and N stage, the authors may much improve the results of SPECT and CT in the detection of skull base invasion in nasopharyngeal carcinoma. Further study is warranted

Poetic devices as part of the trauma narrative in Country of My Skull ...

African Journals Online (AJOL)

This article investigates the role of poetic devices in a trauma narrative like Country of My Skull. The nature and characteristics of a trauma narrative are described with reference to Country of My Skull and Antjie Krog's style as poet and journalist. The theory and role of figurative language in trauma narratives suggest an ...

From mains frequency to converter power supply in foundry melting operations; Von der Netzfrequenz- zur Umrichter-Stromversorgung im Schmelzbetrieb der Eisengiesserei

Energy Technology Data Exchange (ETDEWEB)

Doetsch, Erwin; Yildir, Yilmaz [ABP Induction Systems GmbH, Dortmund (Germany); Koch, Frank [Gusstec Weiherhammer GmbH, Weiherhammer (Germany)

2010-06-15

As is well known, converter-based power feed has now largely superseded line-frequency technology as state-of-the-art in supply of induction melting facilities. Replacement of LF power supply systems with converters is therefore the main priority in the context of projects for modernization of existing induction installations. The objective is generally to leave the crucible furnace and its peripherals effectively as they are, and match the output and frequency of the converter to their needs. The following article states the criteria that need to be taken into account in this context and examines a specific modernization project, using the example of Gusstec Weiherhammer GmbH's iron melting installation. (orig.)

Variations in leopard cat (Prionailurus bengalensis skull morphology and body size: sexual and geographic influences

Directory of Open Access Journals (Sweden)

Fernando L. Sicuro

2015-10-01

Full Text Available The leopard cat, Prionailurus bengalensis (Kerr, 1792, is one of the most widespread Asian cats, occurring in continental eastern and southeastern Asia. Since 1929, several studies have focused on the morphology, ecology, and taxonomy of leopard cats. Nevertheless, hitherto there has been no agreement on basic aspects of leopard cat biology, such as the presence or absence of sexual dimorphism, morphological skull and body differences between the eleven recognized subspecies, and the biogeography of the different morphotypes. Twenty measurements on 25 adult leopard cat skulls from different Asian localities were analyzed through univariate and multivariate statistical approaches. Skull and external body measurements from studies over the last 77 years were assembled and organized in two categories: full data and summary data. Most of this database comprises small samples, which have never been statistically tested and compared with each other. Full data sets were tested with univariate and multivariate statistical analyses; summary data sets (i.e., means, SDs, and ranges were analyzed through suitable univariate approaches. The independent analyses of the data from these works confirmed our original results and improved the overview of sexual dimorphism and geographical morphological variation among subspecies. Continental leopard cats have larger skulls and body dimensions. Skulls of Indochinese morphotypes have broader and higher features than those of continental morphotypes, while individuals from the Sunda Islands have skulls with comparatively narrow and low profiles. Cranial sexual dimorphism is present in different degrees among subspecies. Most display subtle sex-related variations in a few skull features. However, in some cases, sexual dimorphism in skull morphology is absent, such as in P. b. sumatranus and P. b. borneoensis. External body measurement comparisons also indicate the low degree of sexual dimorphism. Apart from the gonads

Functional Imaging of Human Vestibular Cortex Activity Elicited by Skull Tap and Auditory Tone Burst

Science.gov (United States)

Noohi, F.; Kinnaird, C.; Wood, S.; Bloomberg, J.; Mulavara, A.; Seidler, R.

2016-01-01

The current study characterizes brain activation in response to two modes of vestibular stimulation: skull tap and auditory tone burst. The auditory tone burst has been used in previous studies to elicit either the vestibulo-spinal reflex (saccular-mediated colic Vestibular Evoked Myogenic Potentials (cVEMP)), or the ocular muscle response (utricle-mediated ocular VEMP (oVEMP)). Some researchers have reported that air-conducted skull tap elicits both saccular and utricle-mediated VEMPs, while being faster and less irritating for the subjects. However, it is not clear whether the skull tap and auditory tone burst elicit the same pattern of cortical activity. Both forms of stimulation target the otolith response, which provides a measurement of vestibular function independent from semicircular canals. This is of high importance for studying otolith-specific deficits, including gait and balance problems that astronauts experience upon returning to earth. Previous imaging studies have documented activity in the anterior and posterior insula, superior temporal gyrus, inferior parietal lobule, inferior frontal gyrus, and the anterior cingulate cortex in response to different modes of vestibular stimulation. Here we hypothesized that skull taps elicit similar patterns of cortical activity as the auditory tone bursts, and previous vestibular imaging studies. Subjects wore bilateral MR compatible skull tappers and headphones inside the 3T GE scanner, while lying in the supine position, with eyes closed. Subjects received both forms of the stimulation in a counterbalanced fashion. Pneumatically powered skull tappers were placed bilaterally on the cheekbones. The vibration of the cheekbone was transmitted to the vestibular system, resulting in the vestibular cortical response. Auditory tone bursts were also delivered for comparison. To validate our stimulation method, we measured the ocular VEMP outside of the scanner. This measurement showed that both skull tap and auditory

Numerical modeling of magnetic induction and heating in injection molding tools

DEFF Research Database (Denmark)

Guerrier, Patrick; Hattel, Jesper Henri

2013-01-01

the temperatures as close as possible to the cavity surface, by means of an integrated induction heating system in the injection molding tool, to improve the fluidity of the polymer melt hereby ensuring that the polymer melt will continue to flow until the mold cavity is completely filled. The presented work uses......Injection molding of parts with special requirements or features such as micro- or nanostructures on the surface, a good surface finish, or long and thin features results in the need of a specialized technique to ensure proper filling and acceptable cycle time. The aim of this study is to increase...

Process for titanium powders spheroidization by RF induction plasma

International Nuclear Information System (INIS)

Gu Zhongtao; Ye Gaoying; Liu Chuandong; Tong Honghui

2010-01-01

Spherical titanium (Ti) particles were obtained by the process of heating irregularly shaped Ti powders under the radio frequency induction plasma (RF induction plasma) condition. The effect of feed rate, various dispersion methods and Ti particle size on the spheroidization efficiency was studied. The efficiency of the spheroidization is evaluated through the measurements of the percentage of powder spheroidized based on the electron microscopic observations and the tap density measurement of the processed powder. During the short flight of the particles in the plasma flow, of the order of a few milliseconds, the individual titanium particles of the powder are heated and melt, forming a spherical liquid droplet which upon freezing gives rise to the formation of a perfectly dense spherical solid particle. So RF induction plasma is a promising method for the preparation of spherical titanium powders with high flow ability. (authors)

Micro-mechanical properties of different sites on woodpecker's skull.

Science.gov (United States)

Ni, Yikun; Wang, Lizhen; Liu, Xiaoyu; Zhang, Hongquan; Lin, Chia-Ying; Fan, Yubo

2017-11-01

The uneven distributed microstructure featured with plate-like spongy bone in woodpecker's skull has been found to further help reduce the impact during woodpecker's pecking behavior. Therefore, this work was to investigate the micro-mechanical properties and composition on different sites of Great Spotted woodpecker's (GSW) skull. Different sites were selected on forehead, tempus and occiput, which were also compared with those of Eurasian Hoopoe (EH) and Lark birds (LB). Micro structural parameters assessed from micro computed tomography (μCT) occurred significantly difference between GSW, EH and LB. The micro finite element (micro-FE) models were developed and the simulation was performed as a compression process. The maximal stresses of GSW's micro-FE models were all lower than those of EH and LB respectively and few concentrated stresses were noticed on GSW's trabecular bone. Fourier transform infrared mapping suggesting a greater organic content in the occiput of GSW's cranial bone compared with others. The nano-hardness of the GSW's occiput was decreasing from forehead to occiput. The mechanical properties, site-dependent hardness distribution and special material composition of GSW's skull bone are newly found in this study. These factors may lead to a new design of bulk material mimicking these characteristics.

Interference of scalp and skull with dynamic isotope studies of brain

International Nuclear Information System (INIS)

Oldendorf, W.H.

1972-01-01

The overlying scalp and skull create artifacts in external brain counting measurements in which isotope appears in these tissues. It is much less of a problem in dynamic studies since high levels of superficial isotope are not found in the first few seconds after introduction into the blood by any anatomic route. Diffusible tracers concentrate somewhat less in the scalp and skull than in the brain immediately after injection by any route. Nondiffusible tracers of low molecular weight attain a much higher concentration in the scalp than the brain only after about the first minute because of passage from plasma to scalp extracellular fluid. This equilibration does not occur in brain because of the blood-brain barrier. Scalp and skull thus create much less of a problem with brief dynamic studies than with chronic long-term studies. Some physical considerations of external collimation are discussed, and means are suggested to minimize superficial isotope contributions to brain counts. (U.S.)

Evaluation of entrance skin dose to the skull in diagnostic radiology

International Nuclear Information System (INIS)

Mohamed, Anas Ali Elbushari

2015-12-01

Diagnostic x-ray radiology is a common diagnostic practice.Despite of its increasing hazard to human beings, imaging procedures should be achieved with less radiation dose and sufficient image quality. The aim of this study was to estimate the entrance skin dose(ESD) for patients undergoing selected diagnostic x-ray examinations in four hospitals.The study included the examinations of the skull; posterior- anterior(PA) and lateral projections. Fifty patients were enrolled in this study. ESDs were estimated from patients specific exposure parameters using established relation between output (μGy/mAs) and tube voltage(kVp). The estimated ESDs ranged from 0.0097-0.1846 mGy for skull (PA), 0.0097-0.1399 mGy for skull (LAT). These values were acceptable as compared with the international reference dose levels. This study provides additional data that can help the regulatory authority to establish reference dose levels for diagnostic radiology in Sudan.(Author)

Anatomical and Radiographic Study on the Skull and Mandible of the Common Opossum (Didelphis Marsupialis Linnaeus, 1758 in the Caribbean

Directory of Open Access Journals (Sweden)

Reda Mohamed

2018-04-01

Full Text Available Common opossums (Didelphis marsupialis are found throughout the Caribbean island of Trinidad and Tobago. The present work was conducted on 10 skulls and mandibles of the common opossum to describe the osteology and foramina of these skulls and mandibles grossly and radiographically. The information that is garnered can be used to detect, diagnose, and treat head affections, as well as for comparative studies with the skulls and mandibles of other similar species. The skulls and mandibles were prepared and cleaned using standard method. All of the characteristic features of various standards views of the skulls bones, including dorsal, lateral, caudal and midsagittal, and the lateral and caudal views of the mandibles as well as the foramina of the skulls and mandibles were described and discussed. Each skull was divided into long facial and short cranial regions. No supraorbital foramen was observed in the skulls. The tympanic bulla was absent while there was the tympanic process of the alisphenoid. The temporal process of the zygomatic bone, zygomatic process of maxilla, and zygomatic process of the squamosal bone formed the zygomatic arch. The dental formula was confirmed. The bones and foramina of the skull and mandible were similar to other marsupial species and were homologue to that of other mammals.

Chemical characteristics and antithrombotic effect of chondroitin sulfates from sturgeon skull and sturgeon backbone.

Science.gov (United States)

Gui, Meng; Song, Juyi; Zhang, Lu; Wang, Shun; Wu, Ruiyun; Ma, Changwei; Li, Pinglan

2015-06-05

Chondroitin sulfates (CSs) were extracted from sturgeon skull and backbone, and their chemical composition, anticoagulant, anti-platelet and thrombolysis activities were evaluated. The average molecular weights of CS from sturgeon skull and backbone were 38.5kDa and 49.2kDa, respectively. Disaccharide analysis indicated that the sturgeon backbone CS was primarily composed of disaccharide monosulfated in position four of the GalNAc (37.8%) and disaccharide monosulfated in position six of the GalNAc (59.6%) while sturgeon skull CS was primarily composed of nonsulfated disaccharide (74.2%). Sturgeon backbone CS showed stronger antithrombotic effect than sturgeon skull CS. Sturgeon backbone CS could significantly prolong activated partial thromboplastin time (APTT) and thrombin time (TT), inhibited ADP-induced platelet aggregation and dissolved platelet plasma clots in vitro. The results suggested that sturgeon backbone CS can be explored as a functional food with antithrombotic function. Copyright © 2015 Elsevier Ltd. All rights reserved.

Emerging melt quality control solution technologies for aluminium melt

Directory of Open Access Journals (Sweden)

Arturo Pascual, Jr

2009-11-01

Full Text Available The newly developed “MTS 1500” Melt Treatment System is performing the specifi cally required melt treatment operations like degassing, cleaning, modification and/or grain refinement by an automated process in one step and at the same location. This linked process is saving time, energy and metal losses allowing - by automated dosage of the melt treatment agents - the production of a consistent melt quality batch after batch. By linking the MTS Metal Treatment System with sensors operating on-line in the melt, i.e., with a hydrogen sensor “Alspek H”, a fully automated control of parts of the process chain like degassing is possible. This technology does guarantee a pre-specifi ed and documented melt quality in each melt treatment batch. Furthermore, to ensure that castings are consistent and predictable there is a growing realization that critical parameters such as metal cleanliness must be measured prior to casting. There exists accepted methods for measuring the cleanliness of an aluminum melt but these can be both slow and costly. A simple, rapid and meaningful method of measuring and bench marking the cleanliness of an aluminum melt has been developed to offer the foundry a practical method of measuring melt cleanliness. This paper shows the structure and performance of the integrated MTS melt treatment process and documents achieved melt quality standards after degassing, cleaning, modifi cation and grain refi nement operations under real foundry conditions. It also provides an insight on a melt cleanliness measuring device “Alspek MQ” to provide foundry men better tools in meeting the increasing quality and tighter specifi cation demand from the industry.

Skull trepanation in the Bismarck archipelago.

Science.gov (United States)

Watters, David A K

2007-01-01

Skull trepanation is an ancient art and has been recognized in many, if not most, primitive societies. Papua New Guinea came into contact with Europeans in the late 1800s and therefore it was possible for the art to be documented at a time when cranial surgery in Europe was still in its infancy. A reviewof published articles and accounts of those who observed skull trepanation or spoke to those who had. Review of a video of trepanation as practised today in Lihir. Richard Parkinson was a trader turned amateur anthropologist who was able to observe the surgical procedure being practised in Blanche Bay (New Britain). Trepanation was also witnessed by Rev. J.A. Crump in the Duke of Yorks. In New Britain the operation was performed for trauma but in New Ireland it was also employed on conscious patients for epilepsy or severe headache, particularly in the first five years of life. There was, however, a tendency to operate on frontal depressed and open fractures, rather than temporoparietal ones. Once the decision to operate was made the wound was irrigated in coconut juice and this was also used to wash the hands of the surgeon. Anaesthesia was not required as the traumatized patient was unconscious. The procedure is described and the tools included local materials such as obsidian, shark's tooth, a sharpened shell, rattan, coconut shell and bamboo. Of particular interest is the observation of brain pulsations and their relationship to a successful outcome. The outcomes were good, in that 70% of patients were thought to survive, contrasting with a 75% mortality for cranial surgery in London in the 1870s. There is supporting evidence in that many trepanned skulls show evidence of healing and life long after the procedure was completed. Other societies have reported similar survival rates. The good outcomes may have been due to wise case selection as well as a high level of surgical skill following sound principles of wound debridement without necessarily being able to

Skull base tumors: a comprehensive review of transfacial swing osteotomy approaches.

Science.gov (United States)

Moreira-Gonzalez, Andrea; Pieper, Daniel R; Cambra, Jorge Balaguer; Simman, Richard; Jackson, Ian T

2005-03-01

Numerous techniques have been proposed for the resection of skull base tumors, each one unique with regard to the region exposed and degree of technical complexity. This study describes the use of transfacial swing osteotomies in accessing lesions located at various levels of the cranial base. Eight patients who underwent transfacial swings for exposure and resection of cranial base lesions between 1996 and 2002 were studied. The mandible was the choice when wide exposure of nasopharyngeal and midline skull base tumors was necessary, especially when they involved the infratemporal fossa. The midfacial swing osteotomy was an option when access to the entire clivus was necessary. An orbital swing approach was used to access large orbital tumors lying inferior to the optic nerve and posterior to the globe, a region that is often difficult to visualize. Gross total tumor excision was possible in all patients. Six patients achieved disease control and two had recurrences. The complications of cerebrospinal fluid leak, infection, hematoma, or cranial nerve damage did not occur. After surgery, some patients experienced temporary symptoms caused by local swelling. The aesthetic result was considered good. Transfacial swing osteotomies provide a wide exposure to tumors that occur in the central skull base area. Excellent knowledge of the detailed anatomy of this region is paramount to the success of this surgery. The team concept is essential; it is built around the craniofacial surgeon and an experienced skull base neurosurgeon.

Postnatal brain and skull growth in an Apert syndrome mouse model

Science.gov (United States)

Hill, Cheryl A.; Martínez-Abadías, Neus; Motch, Susan M.; Austin, Jordan R.; Wang, Yingli; Jabs, Ethylin Wang; Richtsmeier, Joan T.; Aldridge, Kristina

2012-01-01

Craniofacial and neural tissues develop in concert throughout pre- and postnatal growth. FGFR-related craniosynostosis syndromes, such as Apert syndrome (AS), are associated with specific phenotypes involving both the skull and the brain. We analyzed the effects of the FGFR P253R mutation for Apert syndrome using the Fgfr2+/P253R mouse to evaluate the effects of this mutation on these two tissues over the course of development from day of birth (P0) to postnatal day 2 (P2). Three-dimensional magnetic resonance microscopy and computed tomography images were acquired from Fgfr2+/P253R mice and unaffected littermates at P0 (N=28) and P2 (N=23). 3D coordinate data for 23 skull and 15 brain landmarks were statistically compared between groups. Results demonstrate that the Fgfr2+/P253R mice show reduced growth in the facial skeleton and the cerebrum, while the height and width of the neurocranium and caudal regions of the brain show increased growth relative to unaffected littermates. This localized correspondence of differential growth patterns in skull and brain point to their continued interaction through development and suggest that both tissues display divergent postnatal growth patterns relative to unaffected littermates. However, the change in the skull-brain relationship from P0 to P2 implies that each tissue affected by the mutation retains a degree of independence, rather than one tissue directing the development of the other. PMID:23495236

The oldest anatomical handmade skull of the world c. 1508: 'the ugliness of growing old' attributed to Leonardo da Vinci.

Science.gov (United States)

Missinne, Stefaan J

2014-06-01

The author discusses a previously unknown early sixteenth-century renaissance handmade anatomical miniature skull. The small, naturalistic skull made from an agate (calcedonia) stone mixture (mistioni) shows remarkable osteologic details. Dr. Saban was the first to link the skull to Leonardo. The three-dimensional perspective of and the search for the senso comune are discussed. Anatomical errors both in the drawings of Leonardo and this skull are presented. The article ends with the issue of physiognomy, his grotesque faces, the Perspective Communis and his experimenting c. 1508 with the stone mixture and the human skull. Evidence, including the Italian scale based on Crazie and Braccia, chemical analysis leading to a mine in Volterra and Leonardo's search for the soul in the skull are presented. Written references in the inventory of Salai (1524), the inventory of the Villa Riposo (Raffaello Borghini 1584) and Don Ambrogio Mazenta (1635) are reviewed. The author attributes the skull c. 1508 to Leonardo da Vinci.

Size and shape variability in the skull of Myotis nigricans (Schinz, 1821 (Chiroptera: Vespertilionidae from two geographic areas in Brazil

Directory of Open Access Journals (Sweden)

R. Bornholdt

Full Text Available We present a quantitative analysis of sexual dimorphism and geographic variation in the skull of Myotis nigricans (Schinz, 1821 assessed by geometric morphometrics. Differences in size and shape of skulls were investigated using 30 landmarks plotted on two-dimensional images of lateral and ventral views. Results of geometric morphometrics revealed sexual dimorphism in the centroid size of the skull in both views. Females were larger than males. Nevertheless, there was no sexual dimorphism in skull shape of M. nigricans. Geographic variation was detected in size and shape of the skull. South Brazilian specimens were significantly larger than Ceará specimens only in the lateral view. Differences in skull shape were statistically significant in both views: specimens from South Brazil were brevirostri and presented a more expanded skull in the posterior region while Ceará specimens were longirostri and do not present any expansion in the brain case. Ecological factors for these phenomena are discussed in the text.

Clinical results of proton beam therapy for skull base chordoma

International Nuclear Information System (INIS)

Igaki, Hiroshi; Tokuuye, Koichi; Okumura, Toshiyuki; Sugahara, Shinji; Kagei, Kenji; Hata, Masaharu; Ohara, Kiyoshi; Hashimoto, Takayuki; Tsuboi, Koji; Takano, Shingo; Matsumura, Akira; Akine, Yasuyuki

2004-01-01

Purpose: To evaluate clinical results of proton beam therapy for patients with skull base chordoma. Methods and materials: Thirteen patients with skull base chordoma who were treated with proton beams with or without X-rays at the University of Tsukuba between 1989 and 2000 were retrospectively reviewed. A median total tumor dose of 72.0 Gy (range, 63.0-95.0 Gy) was delivered. The patients were followed for a median period of 69.3 months (range, 14.6-123.4 months). Results: The 5-year local control rate was 46.0%. Cause-specific, overall, and disease-free survival rates at 5 years were 72.2%, 66.7%, and 42.2%, respectively. The local control rate was higher, without statistical significance, for those with preoperative tumors <30 mL. Partial or subtotal tumor removal did not yield better local control rates than for patients who underwent biopsy only as the latest surgery. Conclusion: Proton beam therapy is effective for patients with skull base chordoma, especially for those with small tumors. For a patient with a tumor of <30 mL with no prior treatment, biopsy without tumor removal seems to be appropriate before proton beam therapy

Shape similarities and differences in the skulls of scavenging raptors.

Science.gov (United States)

Guangdi, S I; Dong, Yiyi; Ma, Yujun; Zhang, Zihui

2015-04-01

Feeding adaptations are a conspicuous feature of avian evolution. Bill and cranial shape as well as the jaw muscles are closely related to diet choice and feeding behaviors. Diurnal raptors of Falconiformes exhibit a wide range of foraging behaviors and prey preferences, and are assigned to seven dietary groups in this study. Skulls of 156 species are compared from the dorsal, lateral and ventral views, by using geometric morphometric techniques with those landmarks capturing as much information as possible on the overall shape of cranium, bill, orbits, nostrils and attachment area for different jaw muscles. The morphometric data showed that the skull shape of scavengers differ significantly from other raptors, primarily because of different feeding adaptations. As a result of convergent evolution, different scavengers share generalized common morphology, possessing relatively slender and lower skulls, longer bills, smaller and more sideward orbits, and more caudally positioned quadrates. Significant phylogenetic signals suggested that phylogeny also played important role in shape variation within scavengers. New World vultures can be distinguished by their large nostrils, narrow crania and small orbits; Caracaras typically show large palatines, crania and orbits, as well as short, deep and sharp bill.

Evaluation of Three Cases Using a Novel Titanium Mesh System-Skull-Fit with Orbital Wall (Skull-Fit WOW)-For Cranial Base Reconstructions.

Science.gov (United States)

Hattori, Noriko; Nakajima, Hideo; Tamada, Ikkei; Sakamoto, Yoshiaki; Ohira, Takayuki; Yoshida, Kazunari; Kawase, Takeshi; Kishi, Kazuo

2011-09-01

Cranial base reconstructions associated with tumor resections around the orbital wall often require that both the upper and lateral orbital walls be reconstructed during a single procedure. Previously, we used titanium mesh plates that were preoperatively fabricated based on three-dimensional models. Although these plates are precise and do not increase the probability of infection, we still had to use autologous bones to reconstruct the orbital walls. Recently, we developed a new titanium mesh plate-called Skull-Fit(®)-with orbital wall (Skull-Fit WOW(®)), enabling us to reconstruct the cranial base and orbital walls without bone grafts. Here, we report on three reconstruction cases in which the novel titanium mesh-orbital wall system was used. In all three cases, the customized titanium mesh system performed satisfactorily with little, if any, complications.

Can endocranial volume be estimated accurately from external skull measurements in great-tailed grackles (Quiscalus mexicanus?

Directory of Open Access Journals (Sweden)

Corina J. Logan

2015-06-01

Full Text Available There is an increasing need to validate and collect data approximating brain size on individuals in the field to understand what evolutionary factors drive brain size variation within and across species. We investigated whether we could accurately estimate endocranial volume (a proxy for brain size, as measured by computerized tomography (CT scans, using external skull measurements and/or by filling skulls with beads and pouring them out into a graduated cylinder for male and female great-tailed grackles. We found that while females had higher correlations than males, estimations of endocranial volume from external skull measurements or beads did not tightly correlate with CT volumes. We found no accuracy in the ability of external skull measures to predict CT volumes because the prediction intervals for most data points overlapped extensively. We conclude that we are unable to detect individual differences in endocranial volume using external skull measurements. These results emphasize the importance of validating and explicitly quantifying the predictive accuracy of brain size proxies for each species and each sex.

Chondroblastoma with secondary aneurysmal bone cyst in the anterior skull base

Directory of Open Access Journals (Sweden)

Ming Jie Wang, MD, PhD

2016-06-01

Full Text Available Chondroblastoma with secondary aneurysmal bone cyst (ABC, especially in the anterior skull base, is an extremely rare condition. A 5-year-old boy presented with a large space-occupying lesion in the anterior skull base along with a left sided-epistaxis, proptosis and decreased vision. Radical excision of the lesion was performed by an endoscopic transnasal and transethmoidal approach. The patient recovered without any recurrence during a follow-up period of up to 28 months. Here, we review this rare case and discuss the clinical presentation and surgical treatment.

An Experimental Investigation on APR1400 Penetration Weld Failure by Metallic Melt

International Nuclear Information System (INIS)

An, Sang Mo; Ha, Kwang Soon; Kim, Hwan Yeol

2014-01-01

The penetrations are considered as the most vulnerable parts with respect to the reactor vessel failure when a core melt severe accident occurs and the corium reaches the lower head. Penetration tube failure modes can be divided into two categories; tube ejection out of the vessel lower head and rupture of the penetration tube outside the vessel. Tube ejection begins with degrading the penetration tube weld strength to zero as the weld is exposed to temperatures as high as the weld melting temperature, which is called weld failure, and then overcoming any binding force in the hole in the vessel wall that results from differential thermal expansion of the tube and vessel wall. Tube rupture assumes that the debris bed has melted the instrument tube inside the reactor and melt migrates down into the tube to a location outside the vessel wall where a pressure rupture can occur, thus breaching the pressure boundary. In the present paper, we have a focus on the tube ejection failure mode, specifically on the APR1400 weld failure by direct contact with a metallic melt. The objective is to investigate experimentally the ablation kinetics of an APR1400 penetration weld during the interactions with a metallic melt and to suggest the modification of the existing weld failure model. This paper involves the interaction experiments of two different metallic melts (metallic corium and stainless steel melts) with a weld specimen, and rough estimation of weld failure time. The interaction experiments between the metallic melts and an APR1400 penetration weld were performed to investigate the ablation kinetics of the penetration weld. Metallic corium and stainless steel melts were generated using an induction heating technique and interacted with a penetration weld specimen. The ablation rate of the weld specimen showed a range from 0.109 to 0..244 mm/s and thus the APR1400 penetration weld was estimated to be failed at hundreds of times after the interaction with the melt

Evo-Devo insights from pathological networks: exploring craniosynostosis as a developmental mechanism for modularity and complexity in the human skull.

Science.gov (United States)

Esteve-Altava, Borja; Rasskin-Gutman, Diego

2015-07-20

Bone fusion has occurred repeatedly during skull evolution in all tetrapod lineages, leading to a reduction in the number of bones and an increase in their morphological complexity. The ontogeny of the human skull includes also bone fusions as part of its normal developmental process. However, several disruptions might cause premature closure of cranial sutures (craniosynostosis), reducing the number of bones and producing new skull growth patterns that causes shape changes. Here, we compare skull network models of a normal newborn with different craniosynostosis conditions, the normal adult stage, and phylogenetically reconstructed forms of a primitive tetrapod, a synapsid, and a placental mammal. Changes in morphological complexity of newborn-to-synostosed skulls are two to three times less than in newborn-to-adult; and even smaller when we compare them to the increases among the reconstructed ancestors in the evolutionary transitions. In addition, normal, synostosed, and adult human skulls show the same connectivity modules: facial and cranial. Differences arise in the internal structure of these modules. In the adult skull the facial module has an internal hierarchical organization, whereas the cranial module has a regular network organization. However, all newborn forms, normal and synostosed, do not reach such kind of internal organization. We conclude that the subtle changes in skull complexity at the developmental scale can change the modular substructure of the newborn skull to more integrated modules in the adult skull, but is not enough to generate radical changes as it occurs at a macroevolutionary scale. The timing of closure of craniofacial sutures, together with the conserved patterns of morphological modularity, highlights a potential relation between the premature fusion of bones and the evolution of the shape of the skull in hominids.

Geometric and mechanical evaluation of 3D-printing materials for skull base anatomical education and endoscopic surgery simulation - A first step to create reliable customized simulators.

Science.gov (United States)

Favier, Valentin; Zemiti, Nabil; Caravaca Mora, Oscar; Subsol, Gérard; Captier, Guillaume; Lebrun, Renaud; Crampette, Louis; Mondain, Michel; Gilles, Benjamin

2017-01-01

Endoscopic skull base surgery allows minimal invasive therapy through the nostrils to treat infectious or tumorous diseases. Surgical and anatomical education in this field is limited by the lack of validated training models in terms of geometric and mechanical accuracy. We choose to evaluate several consumer-grade materials to create a patient-specific 3D-printed skull base model for anatomical learning and surgical training. Four 3D-printed consumer-grade materials were compared to human cadaver bone: calcium sulfate hemihydrate (named Multicolor), polyamide, resin and polycarbonate. We compared the geometric accuracy, forces required to break thin walls of materials and forces required during drilling. All materials had an acceptable global geometric accuracy (from 0.083mm to 0.203mm of global error). Local accuracy was better in polycarbonate (0.09mm) and polyamide (0.15mm) than in Multicolor (0.90mm) and resin (0.86mm). Resin and polyamide thin walls were not broken at 200N. Forces needed to break Multicolor thin walls were 1.6-3.5 times higher than in bone. For polycarbonate, forces applied were 1.6-2.5 times higher. Polycarbonate had a mode of fracture similar to the cadaver bone. Forces applied on materials during drilling followed a normal distribution except for the polyamide which was melted. Energy spent during drilling was respectively 1.6 and 2.6 times higher on bone than on PC and Multicolor. Polycarbonate is a good substitute of human cadaver bone for skull base surgery simulation. Thanks to short lead times and reasonable production costs, patient-specific 3D printed models can be used in clinical practice for pre-operative training, improving patient safety.

Benign and malignant skull-involved lesions: discriminative value of conventional CT and MRI combined with diffusion-weighted MRI.

Science.gov (United States)

Tu, Zhanhai; Xiao, Zebin; Zheng, Yingyan; Huang, Hongjie; Yang, Libin; Cao, Dairong

2018-01-01

Background Little is known about the value of computed tomography (CT) and magnetic resonance imaging (MRI) combined with diffusion-weighted imaging (DWI) in distinguishing malignant from benign skull-involved lesions. Purpose To evaluate the discriminative value of DWI combined with conventional CT and MRI for differentiating between benign and malignant skull-involved lesions. Material and Methods CT and MRI findings of 58 patients with pathologically proven skull-involved lesions (43 benign and 15 malignant) were retrospectively reviewed. Conventional CT and MRI characteristics and apparent diffusion coefficient (ADC) value of the two groups were evaluated and compared. Multivariate logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the differential performance of each parameter separately and together. Results The presence of cortical defects or break-through and ill-defined margins were associated with malignant skull-involved lesions (both P benign and malignant skull-involved lesions. Conclusion The combination of CT, MRI, and DWI can help to differentiate malignant from benign skull-involved lesions. CT + MRI + DWI offers optimal sensitivity, while DWI offers optimal specificity.

Cartilaginous metaplasia and overgrowth of neurocranium skull after X-irradiation in utero.

Science.gov (United States)

Schmahl, W; Meyer, I; Kriegel, H; Tempel, K H

1979-01-01

Prenatal X-irradiation of mice in the late organogenesis stage either with a fractionated or a single exposure dose (3 X 160 R or 200 R) leads to remarkable, previously undescribed malformations of the skull. These malformations range from mild hyperostotic nodule formation in about 90% of the offspring to excessive formation of desmal bony tissues, which extend deep into the forebrain and are thus only detectable in histological sections. Metaplastic and hyperplastic formation of cartilage in all the neurocranial regions is observed in about 10% of the offspring. The pathogenesis of these overgrowth phenomena is presumably related to a growth disturbance of both the mesenchymal skull primordium and the brain. While malformation of the latter leads to a decrease of intracranial pressure and consequently to altered growth activity of the skull sutures, the reparative and proliferative capacities of the mesenchyme are also stimulated, in a hyperplastic direction, by X-irradiation.

[Anatomy of the skull base and the cranial nerves in slice imaging].

Science.gov (United States)

Bink, A; Berkefeld, J; Zanella, F

2009-07-01

Computed tomography (CT) and magnetic resonance imaging (MRI) are suitable methods for examination of the skull base. Whereas CT is used to evaluate mainly bone destruction e.g. for planning surgical therapy, MRI is used to show pathologies in the soft tissue and bone invasion. High resolution and thin slice thickness are indispensible for both modalities of skull base imaging. Detailed anatomical knowledge is necessary even for correct planning of the examination procedures. This knowledge is a requirement to be able to recognize and interpret pathologies. MRI is the method of choice for examining the cranial nerves. The total path of a cranial nerve can be visualized by choosing different sequences taking into account the tissue surrounding this cranial nerve. This article summarizes examination methods of the skull base in CT and MRI, gives a detailed description of the anatomy and illustrates it with image examples.

Anatomy of the skull base and the cranial nerves in slice imaging

International Nuclear Information System (INIS)

Bink, A.; Berkefeld, J.; Zanella, F.

2009-01-01

Computed tomography (CT) and magnetic resonance imaging (MRI) are suitable methods for examination of the skull base. Whereas CT is used to evaluate mainly bone destruction e.g. for planning surgical therapy, MRI is used to show pathologies in the soft tissue and bone invasion. High resolution and thin slice thickness are indispensible for both modalities of skull base imaging. Detailed anatomical knowledge is necessary even for correct planning of the examination procedures. This knowledge is a requirement to be able to recognize and interpret pathologies. MRI is the method of choice for examining the cranial nerves. The total path of a cranial nerve can be visualized by choosing different sequences taking into account the tissue surrounding this cranial nerve. This article summarizes examination methods of the skull base in CT and MRI, gives a detailed description of the anatomy and illustrates it with image examples. (orig.) [de

Complex single step skull reconstruction in Gorham's disease - a technical report and review of the literature.

Science.gov (United States)

Ohla, Victoria; Bayoumi, Ahmed B; Hefty, Markus; Anderson, Matthew; Kasper, Ekkehard M

2015-03-11

Gorham's disease is a rare osteolytic disorder characterized by progressive resorption of bone and replacement of osseous matrix by a proliferative non-neoplastic vascular or lymphatic tissue. A standardized treatment protocol has not yet been defined due to the unpredictable natural history of the disease and variable clinical presentations. No single treatment has proven to be superior in arresting the course of the disease. Trials have included surgery, radiation and medical therapies using drugs such as calcium salts, vitamin D supplements and hormones. We report on our advantageous experience in the management of this osteolyic disorder in a case when it affected only the skull vault. A brief review of pertinent literature about Gorham's disease with skull involvement is provided. A 25-year-old Caucasian male presented with a skull depression over the left fronto-temporal region. He noticed progressive enlargement of the skull defect associated with local pain and mild headache. Physical examination revealed a tender palpable depression of the fronto-temporal convexity. Conventional X-ray of the skull showed widespread loss of bone substance. Subsequent CT scans showed features of patchy erosions indicative of an underlying osteolysis. MRI also revealed marginal enhancement at the site of the defect. The patient was in need of a pathological diagnosis as well as complex reconstruction of the afflicted area. A density graded CT scan was done to determine the variable degrees of osteolysis and a custom made allograft was designed for cranioplasty preoperatively to allow for a single step excisional craniectomy with synchronous skull repair. Gorham's disease was diagnosed based on histopathological examination. No neurological deficit or wound complications were reported postoperatively. Over a two-year follow up period, the patient had no evidence of local recurrence or other systemic involvement. A single step excisional craniectomy and cranioplasty can be an

Factors associated with successful magnetic resonance-guided focused ultrasound treatment: efficiency of acoustic energy delivery through the skull.

Science.gov (United States)

Chang, Won Seok; Jung, Hyun Ho; Zadicario, Eyal; Rachmilevitch, Itay; Tlusty, Tal; Vitek, Shuki; Chang, Jin Woo

2016-02-01

Magnetic resonance-guided focused ultrasound surgery (MRgFUS) was recently introduced as treatment for movement disorders such as essential tremor and advanced Parkinson's disease (PD). Although deep brain target lesions are successfully generated in most patients, the target area temperature fails to increase in some cases. The skull is one of the greatest barriers to ultrasonic energy transmission. The authors analyzed the skull-related factors that may have prevented an increase in target area temperatures in patients who underwent MRgFUS. The authors retrospectively reviewed data from clinical trials that involved MRgFUS for essential tremor, idiopathic PD, and obsessive-compulsive disorder. Data from 25 patients were included. The relationships between the maximal temperature during treatment and other factors, including sex, age, skull area of the sonication field, number of elements used, skull volume of the sonication field, and skull density ratio (SDR), were determined. Among the various factors, skull volume and SDR exhibited relationships with the maximum temperature. Skull volume was negatively correlated with maximal temperature (p = 0.023, r(2) = 0.206, y = 64.156 - 0.028x, whereas SDR was positively correlated with maximal temperature (p = 0.009, r(2) = 0.263, y = 49.643 + 11.832x). The other factors correlate with the maximal temperature, although some factors showed a tendency to correlate. Some skull-related factors correlated with the maximal target area temperature. Although the number of patients in the present study was relatively small, the results offer information that could guide the selection of MRgFUS candidates.

Volatile diffusion in silicate melts and its effects on melt inclusions

Directory of Open Access Journals (Sweden)

P. Scarlato

2005-06-01

Full Text Available A compendium of diffusion measurements and their Arrhenius equations for water, carbon dioxide, sulfur, fluorine, and chlorine in silicate melts similar in composition to natural igneous rocks is presented. Water diffusion in silicic melts is well studied and understood, however little data exists for melts of intermediate to basic compositions. The data demonstrate that both the water concentration and the anhydrous melt composition affect the diffusion coefficient of water. Carbon dioxide diffusion appears only weakly dependent, at most, on the volatilefree melt composition and no effect of carbon dioxide concentration has been observed, although few experiments have been performed. Based upon one study, the addition of water to rhyolitic melts increases carbon dioxide diffusion by orders of magnitude to values similar to that of 6 wt% water. Sulfur diffusion in intermediate to silicic melts depends upon the anhydrous melt composition and the water concentration. In water-bearing silicic melts sulfur diffuses 2 to 3 orders of magnitude slower than water. Chlorine diffusion is affected by both water concentration and anhydrous melt composition; its values are typically between those of water and sulfur. Information on fluorine diffusion is rare, but the volatile-free melt composition exerts a strong control on its diffusion. At the present time the diffusion of water, carbon dioxide, sulfur and chlorine can be estimated in silicic melts at magmatic temperatures. The diffusion of water and carbon dioxide in basic to intermediate melts is only known at a limited set of temperatures and compositions. The diffusion data for rhyolitic melts at 800°C together with a standard model for the enrichment of incompatible elements in front of growing crystals demonstrate that rapid crystal growth, greater than 10-10 ms-1, can significantly increase the volatile concentrations at the crystal-melt interface and that any of that melt trapped

Chordomas of the Skull Base, Mobile Spine, and Sacrum: An Epidemiologic Investigation of Presentation, Treatment, and Survival.

Science.gov (United States)

Zuckerman, Scott L; Bilsky, Mark H; Laufer, Ilya

2018-05-01

Chordomas are rare primary bone tumors that arise from the axial skeleton. Our objective was to analyze trends in radiation and surgery over time and determine location-based survival predictors for chordomas of the skull base, mobile spine, and sacrum. A retrospective cohort study of the SEER (Surveillance Epidemiology and End Results) database from 1973 to 2013 was conducted. All patients had histologically confirmed chordomas. The principal outcome measure was overall survival (OS). The cohort included 1616 patients: skull base (664), mobile spine (444), and sacrum (508). Skull base tumors presented earliest in life (47.4 years) and sacral tumors presented latest (62.7 years). Rates of radiation remained stable for skull base and mobile spine tumors but declined for sacral tumors (P = 0.006). Rates of surgical resection remained stable for skull base and sacral tumors but declined for mobile spine tumors (P = 0.046). Skull base chordomas had the longest median survival (162 months) compared with mobile spine (94 months) and sacral tumors (87 months). Being married was independently associated with improved OS for skull base tumors (hazard ratio, 0.73; 95% confidence interval, 0.53-0.99; P = 0.044). Surgical resection was independently associated with improved OS for sacral chordomas (hazard ratio, 0.48; 95% confidence interval, 0.34-0.69; P mobile spine chordomas and radiation for sacral chordomas decreased over time. Patients with skull base tumors survived longer than did patients with mobile spine and sacral chordomas, and surgical resection was associated with improved survival in sacral chordomas only. Understanding the behavior of these tumors can help cranial and spinal surgeons improve treatment in this patient population. Copyright © 2018 Elsevier Inc. All rights reserved.

Material properties of the F82H melted in an electric arc furnace

Energy Technology Data Exchange (ETDEWEB)

Sakasegawa, Hideo, E-mail: sakasegawa.hideo@jaea.go.jp [Japan Atomic Energy Agency, Rokkasho, Aomori (Japan); Tanigawa, Hiroyasu [Japan Atomic Energy Agency, Rokkasho, Aomori (Japan); Kano, Sho; Abe, Hiroaki [Institute for Materials Research, Tohoku university, Sendai, Miyagi (Japan)

2015-10-15

Highlights: • We studied material properties of reduced activation ferritic/martensitic steel. • We melted F82H using a 20 tons electric arc furnace for the first time. • Mass effect likely affected material properties. • MX (M: Metal, C: Carbon and/or Nitrogen) precipitates mainly formed on grain and sub grain boundaries. - Abstract: Fusion DEMO reactor requires over 11,000 tons of reduced activation ferritic/martensitic steel. It is necessary to develop the manufacturing technology for fabricating such large-scale steel with appropriate mechanical properties. In this work, we focused fundamental mechanical properties and microstructures of F82H-BA12 heat which was melted using a 20 tons electric arc furnace followed by electroslag remelting process. Its raw material of iron was blast furnace iron, because the production volume of electrolytic iron which has been used in former heats, is limited. After melting and forging, this F82H-BA12 heat was heat-treated in four different conditions to consider their fluctuations and to optimize them, and tensile and Charpy impact tests were then performed. The result of these mechanical properties were comparable to those of former F82H heats less than 5 tons which were melted applying vacuum induction melting.

Adenoidal size in lateral roentgenogram of skull

International Nuclear Information System (INIS)

Won, H. S.; Byun, Y. S.; Hahm, C. K.; Kim, J. J.

1983-01-01

Adenoid is a kind of tonsil located in the posterior wall of the nasopharynx. Enlargement of the adenoid can produce obstruction of the nasopharynx and eustachian tube. Disturbance in discharge of nasal and paranasal secretions can be a cause of chronic rhinitis, sinusitis and otitis media. The diagnosis of enlarged adenoid by inspection is difficult due to its location. In the lateral roentgenogram of the skull the anterior wall of the adenoid is sharply delineated by air in the nasopharynx. The authors measured the sizes of adenoid and nasopharynx and calculated the adenoid-nasopharyngeal ratio (AN ratio) from 1,000 simple skull lateral roentgenograms of the children between the age of 0 to 16 years. Adenoid size is gradually increasing in the children up to 9 years of age but almost uncharged in the older age group. The AN ratio is highest in the age group of 8-9 years. In the age groups above 9 years of age the AN ratio is gradually decreased due to atrophic changes of the adenoid

Adenoidal size in lateral roentgenogram of skull

Energy Technology Data Exchange (ETDEWEB)

Won, H. S.; Byun, Y. S.; Hahm, C. K.; Kim, J. J. [College of Medicine, Hanyang University, Seoul (Korea, Republic of)

1983-03-15

Adenoid is a kind of tonsil located in the posterior wall of the nasopharynx. Enlargement of the adenoid can produce obstruction of the nasopharynx and eustachian tube. Disturbance in discharge of nasal and paranasal secretions can be a cause of chronic rhinitis, sinusitis and otitis media. The diagnosis of enlarged adenoid by inspection is difficult due to its location. In the lateral roentgenogram of the skull the anterior wall of the adenoid is sharply delineated by air in the nasopharynx. The authors measured the sizes of adenoid and nasopharynx and calculated the adenoid-nasopharyngeal ratio (AN ratio) from 1,000 simple skull lateral roentgenograms of the children between the age of 0 to 16 years. Adenoid size is gradually increasing in the children up to 9 years of age but almost uncharged in the older age group. The AN ratio is highest in the age group of 8-9 years. In the age groups above 9 years of age the AN ratio is gradually decreased due to atrophic changes of the adenoid.

Skull base osteomyelitis: current microbiology and management.

Science.gov (United States)

Spielmann, P M; Yu, R; Neeff, M

2013-01-01

Skull base osteomyelitis typically presents in an immunocompromised patient with severe otalgia and otorrhoea. Pseudomonas aeruginosa is the commonest pathogenic micro-organism, and reports of resistance to fluoroquinolones are now emerging, complicating management. We reviewed our experience of this condition, and of the local pathogenic organisms. A retrospective review from 2004 to 2011 was performed. Patients were identified by their admission diagnostic code, and computerised records examined. Twenty patients were identified. A facial palsy was present in 12 patients (60 per cent). Blood cultures were uniformly negative, and culture of ear canal granulations was non-diagnostic in 71 per cent of cases. Pseudomonas aeruginosa was isolated in only 10 (50 per cent) cases; one strain was resistant to ciprofloxacin but all were sensitive to ceftazidime. Two cases of fungal skull base osteomyelitis were identified. The mortality rate was 15 per cent. The patients' treatment algorithm is presented. Our treatment algorithm reflects the need for multidisciplinary input, early microbial culture of specimens, appropriate imaging, and prolonged and systemic antimicrobial treatment. Resolution of infection must be confirmed by close follow up and imaging.

Morphologic and osteometric analysis of the skull of markhoz goat (Iranian angora).

Science.gov (United States)

Goodarzi, Nader; Shah Hoseini, Toraj

2014-01-01

This study provides some comprehensive osteometric and morphologic descriptions of the skull region of the Markhoz goat. Totally, 17 osteometric parameters of eight skulls of Markhoz goat were measured and expressed as mean ± SD. A skull length of 18.67 ± 0.66, a cranial length of 11.1 ± 0.38, a facial length of 10.23 ± 0.76, a skull index of 47.77 ± 1.96, a cranial index of 54.04 ± 2.29, a facial index of 100.77 ± 6.85 and a foramen magnum index of 89.32 ± 14.1 were recorded. Morphologically frontal bone did not constitute the caudal extent of frontal surface; rather it was formed by the parietal bone. There were two supraorbital foramina in both sides. The prominent facial tuberosity lies dorsally to the 3rd cheek tooth. The infraorbital foramen was single on either side which was located directly dorsally to the junction of the first and second upper premolar. The orbits were round and complete and located on a frontolateral oblique plane. The basilar part of the occipital bone was surrounded by two pairs of muscular tubercles with similar size. The temporal line was continuous of the temporal crest and ran over the parietal bone. In conclusion, the morphologic and osteometric data of Markhoz goat are comparable to other ruminants.

Morphologic and Osteometric Analysis of the Skull of Markhoz Goat (Iranian Angora

Directory of Open Access Journals (Sweden)

Nader Goodarzi

2014-01-01

Full Text Available This study provides some comprehensive osteometric and morphologic descriptions of the skull region of the Markhoz goat. Totally, 17 osteometric parameters of eight skulls of Markhoz goat were measured and expressed as mean ± SD. A skull length of 18.67 ± 0.66, a cranial length of 11.1±0.38, a facial length of 10.23±0.76, a skull index of 47.77±1.96, a cranial index of 54.04±2.29, a facial index of 100.77±6.85 and a foramen magnum index of 89.32±14.1 were recorded. Morphologically frontal bone did not constitute the caudal extent of frontal surface; rather it was formed by the parietal bone. There were two supraorbital foramina in both sides. The prominent facial tuberosity lies dorsally to the 3rd cheek tooth. The infraorbital foramen was single on either side which was located directly dorsally to the junction of the first and second upper premolar. The orbits were round and complete and located on a frontolateral oblique plane. The basilar part of the occipital bone was surrounded by two pairs of muscular tubercles with similar size. The temporal line was continuous of the temporal crest and ran over the parietal bone. In conclusion, the morphologic and osteometric data of Markhoz goat are comparable to other ruminants.

Patients cured of acromegaly do not experience improvement of their skull deformities.

Science.gov (United States)

Rick, Jonathan W; Jahangiri, Arman; Flanigan, Patrick M; Aghi, Manish K

2017-04-01

Acromegaly is a rare disease that is associated with many co-morbidities. This condition also causes progressive deformity of the skull which includes frontal bossing and cranial thickening. Surgical and/or medical management can cure this condition in many patients, but it is not understood if patients cured of acromegaly experience regression of their skull deformities. We performed a retrospective analysis on patients treated at our dedicated pituitary center from 2009 to 2014. We looked at all MRI images taken during the treatment of these patients and recorded measurements on eight skull dimensions. We then analyzed these measurements for changes over time. 29 patients underwent curative treatment for acromegaly within our timeframe. The mean age for this population was 45.0 years old (range 19-70) and 55.2 % (n = 16) were female. All of these patients were treated with a transsphenoidal resection for a somatotropic pituitary adenoma. 9 (31.1%) of these patients required further medical therapy to be cured. We found statically significant variation in the coronal width of the sella turcica after therapy, which is likely attributable to changes from transsphenoidal surgery. None of the other dimensions had significant variation over time after cure. Patients cured of acromegaly should not expect natural regression of their skull deformities. Our study suggests that both frontal bossing and cranial thickening do not return to normal after cure.

Management of Anterior Skull Base Defect Depending on Its Size and Location

Science.gov (United States)

Bernal-Sprekelsen, Manuel; Rioja, Elena; Enseñat, Joaquim; Enriquez, Karla; Viscovich, Liza; Agredo-Lemos, Freddy Enrique; Alobid, Isam

2014-01-01

Introduction. We present our experience in the reconstruction of these leaks depending on their size and location. Material and Methods. Fifty-four patients who underwent advanced skull base surgery (large defects, >20 mm) and 62 patients with CSF leaks of different origin (small, 2–10 mm, and midsize, 11–20 mm, defects) were included in the retrospective study. Large defects were reconstructed with a nasoseptal pedicled flap positioned on fat and fascia lata. In small and midsized leaks. Fascia lata in an underlay position was used for its reconstruction covered with mucoperiosteum of either the middle or the inferior turbinate. Results. The most frequent etiology for small and midsized defects was spontaneous (48.4%), followed by trauma (24.2%), iatrogenic (5%). The success rate after the first surgical reconstruction was 91% and 98% in large skull base defects and small/midsized, respectively. Rescue surgery achieved 100%. Conclusions. Endoscopic surgery for any type of skull base defect is the gold standard. The size of the defects does not seem to play a significant role in the success rate. Fascia lata and mucoperiosteum of the turbinate allow a two-layer reconstruction of small and midsized defects. For larger skull base defects, a combination of fat, fascia lata, and nasoseptal pedicled flaps provides a successful reconstruction. PMID:24895567

Topographic analysis of the skull vibration-induced nystagmus test with piezoelectric accelerometers and force sensors.

Science.gov (United States)

Dumas, Georges; Lion, Alexis; Perrin, Philippe; Ouedraogo, Evariste; Schmerber, Sébastien

2016-03-23

Vibration-induced nystagmus is elicited by skull or posterior cervical muscle stimulations in patients with vestibular diseases. Skull vibrations delivered by the skull vibration-induced nystagmus test are known to stimulate the inner ear structures directly. This study aimed to measure the vibration transfer at different cranium locations and posterior cervical regions to contribute toward stimulus topographic optimization (experiment 1) and to determine the force applied on the skull with a hand-held vibrator to study the test reproducibility and provide recommendations for good clinical practices (experiment 2). In experiment 1, a 100 Hz hand-held vibrator was applied on the skull (vertex, mastoids) and posterior cervical muscles in 11 healthy participants. Vibration transfer was measured by piezoelectric sensors. In experiment 2, the vibrator was applied 30 times by two experimenters with dominant and nondominant hands on a mannequin equipped to measure the force. Experiment 1 showed that after unilateral mastoid vibratory stimulation, the signal transfer was higher when recorded on the contralateral mastoid than on the vertex or posterior cervical muscles (Pskull vibration-induced nystagmus test in patients with unilateral vestibular lesions and enables a stronger stimulation of the healthy side. In clinical practice, the vibrator should be placed on the mastoid and should be held by the clinician's dominant hand.

Skull wounds linked with blunt trauma (hammer example). A report of two depressed skull fractures--elements of biomechanical explanation.

Science.gov (United States)

Delannoy, Yann; Becart, Anne; Colard, Thomas; Delille, Rémi; Tournel, Gilles; Hedouin, Valéry; Gosset, Didier

2012-09-01

The lesions of the skull following perforating traumas can create complex fractures. The blunt traumas can, according to the swiftness and the shape of the object used, create a depressed fracture. The authors describe through two clinical cases the lesional characteristic of the blunt traumas, perforating the skull using a hammer. In both cases the cranial lesions were very typical: they were geometrical, square shaped, of the same size than the tool (head and tip of the hammer). On the outer table of the skull, the edges of the wounds were sharp and regular. On the inner table, the edges of the wounds were beveled and irregular. The bony penetration in the depressed fracture results from a rupture of the outer table of the bone under tension, in periphery, by the bend of the bone to the impact (outbending) and then, from the inner table with comminuted bony fragmentation. Breeding on the fractures of the size and the shape of the blunt objects used is inconstant and differs, that it is the objects of flat surface or wide in opposition to those of small surface area. Fractures morphologies depend on one hand on these extrinsic factors and on the other hand, of intrinsic factors (structure of the bone). To identify them, we had previously conducted experimental work on cranial bone samples. The bone was submitted to a device for three-point bending. This work had shown properties of thickness and stiffness of the various areas of the vault. Our cases are consistent with these results and illustrate the variability of bone lesions according to region and mode of use of blunt weapons. Many studies have identified criteria for identification of the weapons and the assistance of digital and biomechanical models will be an invaluable contribution with this aim in the future. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Skull shapes of the Lissodelphininae: radiation, adaptation and asymmetry.

Science.gov (United States)

Galatius, Anders; Goodall, R Natalie P

2016-06-01

Within Delphinidae, the sub-family Lissodelphininae consists of 8 Southern Ocean species and 2 North Pacific species. Lissodelphininae is a result of recent phylogenetic revisions based on molecular methods. Thus, morphological radiation within the taxon has not been investigated previously. The sub-family consists of ecologically diverse groups such as (1) the Cephalorhynchus genus of 4 small species inhabiting coastal and shelf waters, (2) the robust species in the Lagenorhynchus genus with the coastal La. australis, the offshore La. cruciger, the pelagic species La. obscurus and La. obliquidens, and (3) the morphologically aberrant genus Lissodelphis. Here, the shapes of 164 skulls from adults of all 10 species were compared using 3-dimensional geometric morphometrics. The Lissodelphininae skulls were supplemented by samples of Lagenorhynchus albirostris and Delphinus delphis to obtain a context for the variation found within the subfamily. Principal components analysis was used to map the most important components of shape variation on phylogeny. The first component of shape variation described an elongation of the rostrum, lateral and dorsoventral compression of the neurocranium and smaller temporal fossa. The two Lissodelphis species were on the high extreme of this spectrum, while Lagenorhynchus australis, La. cruciger and Cephalorhynchus heavisidii were at the low extreme. Along the second component, La. cruciger was isolated from the other species by its expanded neurocranium and concave facial profile. Shape variation supports the gross phylogenetic relationships proposed by recent molecular studies. However, despite the great diversity of ecology and external morphology within the subfamily, shape variation of the feeding apparatus was modest, indicating a similar mode of feeding across the subfamily. All 10 species were similar in their pattern of skull asymmetry, but interestingly, two species using narrowband high frequency clicks (La. cruciger and C

Encephalocele and associated skull defects | Komolafe | West ...

African Journals Online (AJOL)

The case notes of the patients with encephalocele managed over a 5 year period were reviewed and the relevant data obtained. Seventy-six percent of the patients had occipital encephalocele. The average diameter of the skull defect was 1.8cm. Only 2(9.5%) of the patients had cranioplasty. Cosmesis was acceptable to all ...

Double melting in polytetrafluoroethylene γ-irradiated above its melting point

International Nuclear Information System (INIS)

Serov, S.A.; Khatipov, S.A.; Sadovskaya, N.V.; Tereshenkov, A.V.; Chukov, N.A.

2012-01-01

Highlights: ► PTFE irradiation leads to formation of double melting peaks in DSC curves. ► This is connected to dual crystalline morphology typical for PTFE. ► Two crystalline types exist in the PTFE irradiated in the melt. - Abstract: PTFE irradiation above its melting point leads to formation of double melting and crystallization peaks in DSC curves. Splitting of melting peaks is connected to dual crystalline morphology typical for PTFE irradiated in the melt. According to electron microscopy, two crystalline types with different size and packing density exist in the irradiated PTFE.

Streamlined, Inexpensive 3D Printing of the Brain and Skull.

Science.gov (United States)

Naftulin, Jason S; Kimchi, Eyal Y; Cash, Sydney S

2015-01-01

Neuroimaging technologies such as Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) collect three-dimensional data (3D) that is typically viewed on two-dimensional (2D) screens. Actual 3D models, however, allow interaction with real objects such as implantable electrode grids, potentially improving patient specific neurosurgical planning and personalized clinical education. Desktop 3D printers can now produce relatively inexpensive, good quality prints. We describe our process for reliably generating life-sized 3D brain prints from MRIs and 3D skull prints from CTs. We have integrated a standardized, primarily open-source process for 3D printing brains and skulls. We describe how to convert clinical neuroimaging Digital Imaging and Communications in Medicine (DICOM) images to stereolithography (STL) files, a common 3D object file format that can be sent to 3D printing services. We additionally share how to convert these STL files to machine instruction gcode files, for reliable in-house printing on desktop, open-source 3D printers. We have successfully printed over 19 patient brain hemispheres from 7 patients on two different open-source desktop 3D printers. Each brain hemisphere costs approximately $3-4 in consumable plastic filament as described, and the total process takes 14-17 hours, almost all of which is unsupervised (preprocessing = 4-6 hr; printing = 9-11 hr, post-processing = Printing a matching portion of a skull costs $1-5 in consumable plastic filament and takes less than 14 hr, in total. We have developed a streamlined, cost-effective process for 3D printing brain and skull models. We surveyed healthcare providers and patients who confirmed that rapid-prototype patient specific 3D models may help interdisciplinary surgical planning and patient education. The methods we describe can be applied for other clinical, research, and educational purposes.

Streamlined, Inexpensive 3D Printing of the Brain and Skull.

Directory of Open Access Journals (Sweden)

Jason S Naftulin

Full Text Available Neuroimaging technologies such as Magnetic Resonance Imaging (MRI and Computed Tomography (CT collect three-dimensional data (3D that is typically viewed on two-dimensional (2D screens. Actual 3D models, however, allow interaction with real objects such as implantable electrode grids, potentially improving patient specific neurosurgical planning and personalized clinical education. Desktop 3D printers can now produce relatively inexpensive, good quality prints. We describe our process for reliably generating life-sized 3D brain prints from MRIs and 3D skull prints from CTs. We have integrated a standardized, primarily open-source process for 3D printing brains and skulls. We describe how to convert clinical neuroimaging Digital Imaging and Communications in Medicine (DICOM images to stereolithography (STL files, a common 3D object file format that can be sent to 3D printing services. We additionally share how to convert these STL files to machine instruction gcode files, for reliable in-house printing on desktop, open-source 3D printers. We have successfully printed over 19 patient brain hemispheres from 7 patients on two different open-source desktop 3D printers. Each brain hemisphere costs approximately $3-4 in consumable plastic filament as described, and the total process takes 14-17 hours, almost all of which is unsupervised (preprocessing = 4-6 hr; printing = 9-11 hr, post-processing = <30 min. Printing a matching portion of a skull costs $1-5 in consumable plastic filament and takes less than 14 hr, in total. We have developed a streamlined, cost-effective process for 3D printing brain and skull models. We surveyed healthcare providers and patients who confirmed that rapid-prototype patient specific 3D models may help interdisciplinary surgical planning and patient education. The methods we describe can be applied for other clinical, research, and educational purposes.

Streamlined, Inexpensive 3D Printing of the Brain and Skull

Science.gov (United States)

Cash, Sydney S.

2015-01-01

Neuroimaging technologies such as Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) collect three-dimensional data (3D) that is typically viewed on two-dimensional (2D) screens. Actual 3D models, however, allow interaction with real objects such as implantable electrode grids, potentially improving patient specific neurosurgical planning and personalized clinical education. Desktop 3D printers can now produce relatively inexpensive, good quality prints. We describe our process for reliably generating life-sized 3D brain prints from MRIs and 3D skull prints from CTs. We have integrated a standardized, primarily open-source process for 3D printing brains and skulls. We describe how to convert clinical neuroimaging Digital Imaging and Communications in Medicine (DICOM) images to stereolithography (STL) files, a common 3D object file format that can be sent to 3D printing services. We additionally share how to convert these STL files to machine instruction gcode files, for reliable in-house printing on desktop, open-source 3D printers. We have successfully printed over 19 patient brain hemispheres from 7 patients on two different open-source desktop 3D printers. Each brain hemisphere costs approximately $3–4 in consumable plastic filament as described, and the total process takes 14–17 hours, almost all of which is unsupervised (preprocessing = 4–6 hr; printing = 9–11 hr, post-processing = Printing a matching portion of a skull costs $1–5 in consumable plastic filament and takes less than 14 hr, in total. We have developed a streamlined, cost-effective process for 3D printing brain and skull models. We surveyed healthcare providers and patients who confirmed that rapid-prototype patient specific 3D models may help interdisciplinary surgical planning and patient education. The methods we describe can be applied for other clinical, research, and educational purposes. PMID:26295459

Clinicopathological significance of p16, cyclin D1, Rb and MIB-1 levels in skull base chordoma and chondrosarcoma

Directory of Open Access Journals (Sweden)

Jun-qi Liu

2015-09-01

Full Text Available Objective: To investigate the expression of p16, cyclin D1, retinoblastoma tumor suppressor protein (Rb and MIB-1 in skull base chordoma and chondrosarcoma tissues, and to determine the clinicopathological significance of the above indexes in these diseases. Methods: A total of 100 skull base chordoma, 30 chondrosarcoma, and 20 normal cartilage tissue samples were analyzed by immunohistochemistry. The expression levels of p16, cyclinD1, Rb and MIB-1 proteins were assessed for potential correlation with the clinicopathological features. Results: As compared to normal cartilage specimen (control, there was decreased expression of p16, and increased expression of cyclin D1, Rb and MIB-1 proteins, in both skull base chordoma and chondrosarcoma specimens. MIB-1 LI levels were significantly increased in skull base chordoma specimens with negative expression of p16, and positive expression of cyclin D1 and Rb (P  0.05. However, p16 and MIB-1 levels correlated with the intradural invasion, and expression of p16, Rb and MIB-1 correlated with the number of tumor foci (P < 0.05. Further, the expression of p16 and MIB-1 appeared to correlate with the prognosis of patients with skull base chordoma. Conclusions: The abnormal expression of p16, cyclin D1 and Rb proteins might be associated with the tumorigenesis of skull base chordoma and chondrosarcoma. Keywords: p16, Cyclin D1, Rb, MIB-1, Skull base chordoma, Skull base chondrosarcoma

Accuracy and reliability of linear cephalometric measurements from cone-beam computed tomography scans of a dry human skull.

Science.gov (United States)

Berco, Mauricio; Rigali, Paul H; Miner, R Matthew; DeLuca, Stephelynn; Anderson, Nina K; Will, Leslie A

2009-07-01

The purpose of this study was to determine the accuracy and reliability of 3-dimensional craniofacial measurements obtained from cone-beam computed tomography (CBCT) scans of a dry human skull. Seventeen landmarks were identified on the skull. CBCT scans were then obtained, with 2 skull orientations during scanning. Twenty-nine interlandmark linear measurements were made directly on the skull and compared with the same measurements made on the CBCT scans. All measurements were made by 2 operators on 4 separate occasions. The method errors were 0.19, 0.21, and 0.19 mm in the x-, y- and z-axes, respectively. Repeated measures analysis of variance (ANOVA) showed no significant intraoperator or interoperator differences. The mean measurement error was -0.01 mm (SD, 0.129 mm). Five measurement errors were found to be statistically significantly different; however, all measurement errors were below the known voxel size and clinically insignificant. No differences were found in the measurements from the 2 CBCT scan orientations of the skull. CBCT allows for clinically accurate and reliable 3-dimensional linear measurements of the craniofacial complex. Moreover, skull orientation during CBCT scanning does not affect the accuracy or the reliability of these measurements.

Efficacy of navigation in skull base surgery using composite computer graphics of magnetic resonance and computed tomography images

International Nuclear Information System (INIS)

Hayashi, Nakamasa; Kurimoto, Masanori; Hirashima, Yutaka; Ikeda, Hiroaki; Shibata, Takashi; Tomita, Takahiro; Endo, Shunro

2001-01-01

The efficacy of a neurosurgical navigation system using three-dimensional composite computer graphics (CGs) of magnetic resonance (MR) and computed tomography (CT) images was evaluated in skull base surgery. Three-point transformation was used for integration of MR and CT images. MR and CT image data were obtained with three skin markers placed on the patient's scalp. Volume-rendering manipulations of the data produced three-dimensional CGs of the scalp, brain, and lesions from the MR images, and the scalp and skull from the CT. Composite CGs of the scalp, skull, brain, and lesion were created by registering the three markers on the three-dimensional rendered scalp images obtained from MR imaging and CT in the system. This system was used for 14 patients with skull base lesions. Three-point transformation using three-dimensional CGs was easily performed for multimodal registration. Simulation of surgical procedures on composite CGs aided in comprehension of the skull base anatomy and selection of the optimal approaches. Intraoperative navigation aided in determination of actual spatial position in the skull base and the optimal trajectory to the tumor during surgical procedures. (author)

Periorbital skull fractures in five horses

International Nuclear Information System (INIS)

Caron, J.P.; Barber, S.M.; Bailey, J.V.; Fretz, P.B.; Pharr, J.W.

1986-01-01

Periorbital skull fractures were diagnosed in 5 horses, and were associated with ophthalmic complications including corneal ulceration, uveitis, and entrapment of the eye by retrobulbar bone fragments. Physical examination was of greater diagnostic use than radiography. Surgical repair was performed on all horses and was associated with a more favorable postoperative appearance in horses treated acutely; however, the cosmetic results were considered acceptable in all horses. Major postoperative complications were not observed

Does nasal echolocation influence the modularity of the mammal skull?

Science.gov (United States)

Santana, S E; Lofgren, S E

2013-11-01

In vertebrates, changes in cranial modularity can evolve rapidly in response to selection. However, mammals have apparently maintained their pattern of cranial integration throughout their evolutionary history and across tremendous morphological and ecological diversity. Here, we use phylogenetic, geometric morphometric and comparative analyses to test the hypothesis that the modularity of the mammalian skull has been remodelled in rhinolophid bats due to the novel and critical function of the nasal cavity in echolocation. We predicted that nasal echolocation has resulted in the evolution of a third cranial module, the 'nasal dome', in addition to the braincase and rostrum modules, which are conserved across mammals. We also test for similarities in the evolution of skull shape in relation to habitat across rhinolophids. We find that, despite broad variation in the shape of the nasal dome, the integration of the rhinolophid skull is highly consistent with conserved patterns of modularity found in other mammals. Across their broad geographical distribution, cranial shape in rhinolophids follows two major divisions that could reflect adaptations to dietary and environmental differences in African versus South Asian distributions. Our results highlight the potential of a relatively simple modular template to generate broad morphological and functional variation in mammals. © 2013 The Authors. Journal of Evolutionary Biology © 2013 European Society For Evolutionary Biology.

[Establishment of a 3D finite element model of human skull using MSCT images and mimics software].

Science.gov (United States)

Huang, Ping; Li, Zheng-dong; Shao, Yu; Zou, Dong-hua; Liu, Ning-guo; Li, Li; Chen, Yuan-yuan; Wan, Lei; Chen, Yi-jiu

2011-02-01

To establish a human 3D finite element skull model, and to explore its value in biomechanics analysis. The cadaveric head was scanned and then 3D skull model was created using Mimics software based on 2D CT axial images. The 3D skull model was optimized by preprocessor along with creation of the surface and volume meshes. The stress changes, after the head was struck by an object or the head hit the ground directly, were analyzed using ANSYS software. The original 3D skull model showed a large number of triangles with a poor quality and high similarity with the real head, while the optimized model showed high quality surface and volume meshes with a small number of triangles comparatively. The model could show the local and global stress changes effectively. The human 3D skull model can be established using MSCT and Mimics software and provides a good finite element model for biomechanics analysis. This model may also provide a base for the study of head stress changes following different forces.

A Review of Stereotactic Radiosurgery Practice in the Management of Skull Base Meningiomas

OpenAIRE

Vera, Elena; Iorgulescu, J. Bryan; Raper, Daniel M.S.; Madhavan, Karthik; Lally, Brian E.; Morcos, Jacques; Elhammady, Samy; Sherman, Jonathan; Komotar, Ricardo J.

2014-01-01

Gross total resection of skull base meningiomas poses a surgical challenge due to their proximity to neurovascular structures. Once the gold standard therapy for skull base meningiomas, microsurgery has been gradually replaced by or used in combination with stereotactic radiosurgery (SRS). This review surveys the safety and efficacy of SRS in the treatment of cranial base meningiomas including 36 articles from 1991 to 2010. SRS produces excellent tumor control with low morbidity rates compare...

Thin-section CT of the skull base

International Nuclear Information System (INIS)

Beyer-Enke, S.A.; Goerich, J.; Gamroth, A.; Tiedemann, K.

1987-01-01

High-resolution CT-images of the skull base are depicted and anatomical structures are described. A large variety of osseous and soft tissue structures can be differentiated in the temporal bone, nasopharynx and orbita. Knowledge of the anatomical structures is essential for the recognition of pathological changes and also plays an essential role for the diagnostically involved radiologist. (orig.) [de

Anatomical Network Analysis Shows Decoupling of Modular Lability and Complexity in the Evolution of the Primate Skull

Science.gov (United States)

Esteve-Altava, Borja; Boughner, Julia C.; Diogo, Rui; Villmoare, Brian A.; Rasskin-Gutman, Diego

2015-01-01

Modularity and complexity go hand in hand in the evolution of the skull of primates. Because analyses of these two parameters often use different approaches, we do not know yet how modularity evolves within, or as a consequence of, an also-evolving complex organization. Here we use a novel network theory-based approach (Anatomical Network Analysis) to assess how the organization of skull bones constrains the co-evolution of modularity and complexity among primates. We used the pattern of bone contacts modeled as networks to identify connectivity modules and quantify morphological complexity. We analyzed whether modularity and complexity evolved coordinately in the skull of primates. Specifically, we tested Herbert Simon’s general theory of near-decomposability, which states that modularity promotes the evolution of complexity. We found that the skulls of extant primates divide into one conserved cranial module and up to three labile facial modules, whose composition varies among primates. Despite changes in modularity, statistical analyses reject a positive feedback between modularity and complexity. Our results suggest a decoupling of complexity and modularity that translates to varying levels of constraint on the morphological evolvability of the primate skull. This study has methodological and conceptual implications for grasping the constraints that underlie the developmental and functional integration of the skull of humans and other primates. PMID:25992690

Comparison of SPECT/CT, MRI and CT in diagnosis of skull base bone invasion in nasopharyngeal carcinoma.

Science.gov (United States)

Zhang, Shu-xu; Han, Peng-hui; Zhang, Guo-qian; Wang, Rui-hao; Ge, Yong-bin; Ren, Zhi-gang; Li, Jian-sheng; Fu, Wen-hai

2014-01-01

Early detection of skull base invasion in nasopharyngeal carcinoma (NPC) is crucial for correct staging, assessing treatment response and contouring the tumor target in radiotherapy planning, as well as improving the patient's prognosis. To compare the diagnostic efficacy of single photon emission computed tomography/computed tomography (SPECT/CT) imaging, magnetic resonance imaging (MRI) and computed tomography (CT) for the detection of skull base invasion in NPC. Sixty untreated patients with histologically proven NPC underwent SPECT/CT imaging, contrast-enhanced MRI and CT. Of the 60 patients, 30 had skull base invasion confirmed by the final results of contrast-enhanced MRI, CT and six-month follow-up imaging (MRI and CT). The diagnostic efficacy of the three imaging modalities in detecting skull base invasion was evaluated. The rates of positive findings of skull base invasion for SPECT/CT, MRI and CT were 53.3%, 48.3% and 33.3%, respectively. The sensitivity, specificity and accuracy were 93.3%, 86.7% and 90.0% for SPECT/CT fusion imaging, 96.7%, 100.0% and 98.3% for contrast-enhanced MRI, and 66.7%, 100.0% and 83.3% for contrast-enhanced CT. MRI showed the best performance for the diagnosis of skull base invasion in nasopharyngeal carcinoma, followed closely by SPECT/CT. SPECT/CT had poorer specificity than that of both MRI and CT, while CT had the lowest sensitivity.

Endoscopic endonasal double flap technique for reconstruction of large anterior skull base defects: technical note.

Science.gov (United States)

Dolci, Ricardo Landini Lutaif; Todeschini, Alexandre Bossi; Santos, Américo Rubens Leite Dos; Lazarini, Paulo Roberto

2018-04-19

One of the main concerns in endoscopic endonasal approaches to the skull base has been the high incidence and morbidity associated with cerebrospinal fluid leaks. The introduction and routine use of vascularized flaps allowed a marked decrease in this complication followed by a great expansion in the indications and techniques used in endoscopic endonasal approaches, extending to defects from huge tumours and previously inaccessible areas of the skull base. Describe the technique of performing endoscopic double flap multi-layered reconstruction of the anterior skull base without craniotomy. Step by step description of the endoscopic double flap technique (nasoseptal and pericranial vascularized flaps and fascia lata free graft) as used and illustrated in two patients with an olfactory groove meningioma who underwent an endoscopic approach. Both patients achieved a gross total resection: subsequent reconstruction of the anterior skull base was performed with the nasoseptal and pericranial flaps onlay and a fascia lata free graft inlay. Both patients showed an excellent recovery, no signs of cerebrospinal fluid leak, meningitis, flap necrosis, chronic meningeal or sinonasal inflammation or cerebral herniation having developed. This endoscopic double flap technique we have described is a viable, versatile and safe option for anterior skull base reconstructions, decreasing the incidence of complications in endoscopic endonasal approaches. Copyright © 2018 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

Bilaterally symmetric Fourier approximations of the skull outlines of ...

Indian Academy of Sciences (India)

Unknown

These points denotes break in curvature of the outline and their positions can be compared to .... temnospondyl skull outlines by their shape variations. 2. .... their dentition are related to the feeding habits. Future ... pondyl families is not easy.

Do Muscles Constrain Skull Shape Evolution in Strepsirrhines?

Science.gov (United States)

Fabre, Anne-Claire; Perry, Jonathan M G; Hartstone-Rose, Adam; Lowie, AuróLien; Boens, Andy; Dumont, MaÏtena

2018-02-01

Despite great interest and decades of research, the musculoskeletal relationships of the masticatory system in primates are still not fully understood. However, without a clear understanding of the interplay between muscles and bones it remains difficult to understand the functional significance of morphological traits of the skeleton. Here, we aim to study the impacts of the masticatory muscles on the shape of the cranium and the mandible as well as their co-variation in strepsirrhine primates. To do so, we use 3D geometric morphometric approaches to assess the shape of each bone of the skull of 20 species for which muscle data are available in the literature. Impacts of the masticatory muscles on the skull shape were assessed using non-phylogenetic regressions and phylogenetic regressions whereas co-variations were assessed using two-blocks partial least square (2B-PLS) and phylogenetic 2B-PLS. Our results show that there is a phylogenetic signal for skull shape and masticatory muscles. They also show that there is a significant impact of the masticatory muscles on cranial shape but not as much as on the mandible. The co-variations are also stronger between the masticatory muscles and cranial shape even when taking into account phylogeny. Interestingly, the results of co-variation between the masticatory muscles and mandibular shape show a more complex pattern in two different directions to get strong muscles associated with mandibular shape: a folivore way (with the bamboo lemurs and sifakas) and a hard-object eater one (with the aye-aye). Anat Rec, 301:291-310, 2018. © 2018 Wiley Periodicals, Inc. © 2018 Wiley Periodicals, Inc.

Intraoperative biopsy of the major cranial nerves in the surgical strategy for adenoid cystic carcinoma close to the skull base.

Science.gov (United States)

Tarsitano, Achille; Pizzigallo, Angelo; Gessaroli, Manlio; Sturiale, Carmelo; Marchetti, Claudio

2012-02-01

Adenoid cystic carcinoma of the salivary glands has a propensity for perineural invasion, which could favor spread along the major cranial nerves, sometimes to the skull base and through the foramina to the brain parenchyma. This study evaluated the relationship between neural spread and relapse in the skull base. During surgery, we performed multiple biopsies with extemporaneous examination of the major nerves close to the tumor to guide the surgical resection. The percentage of actuarial local control at 5 years for patients with a positive named nerve and skull base infiltration was 12.5%, compared with 90.0% in patients who were named nerve-negative and without infiltration of the skull base (P = .001). Our study shows that local control of disease for patients who are named nerve-positive with skull base infiltration is significantly more complex compared with patients who are named nerve-negative without infiltration of the skull base. Copyright © 2012. Published by Mosby, Inc.

Fractionated external beam radiotherapy of skull base metastases with cranial nerve involvement

Energy Technology Data Exchange (ETDEWEB)

Droege, L.H.; Hinsche, T.; Hess, C.F.; Wolff, H.A. [University Hospital of Goettingen, Department of Radiotherapy and Radiation Oncology, Goettingen (Germany); Canis, M. [University of Goettingen, Department of Otorhinolaryngology, Head and Neck Surgery, Goettingen (Germany); Alt-Epping, B. [University of Goettingen, Department of Palliative Medicine, Goettingen (Germany)

2014-02-15

Skull base metastases frequently appear in a late stage of various tumor entities and cause pain and neurological disorders which strongly impair patient quality of life. This study retrospectively analyzed fractionated external beam radiotherapy (EBRT) as a palliative treatment approach with special respect to neurological outcome, feasibility and acute toxicity. A total of 30 patients with skull base metastases and cranial nerve disorders underwent EBRT with a mean total dose of 31.6 Gy. Neurological status was assessed before radiotherapy, during radiotherapy and 2 weeks afterwards categorizing orbital, parasellar, middle fossa, jugular foramen and occipital condyle involvement and associated clinical syndromes. Neurological outcome was scored as persistence of symptoms, partial response, good response and complete remission. Treatment-related toxicity and overall survival were assessed. Before EBRT 37 skull base involvement syndromes were determined with 4 patients showing more than 1 syndrome. Of the patients 81.1 % responded to radiotherapy with 10.8 % in complete remission, 48.6 % with good response and 21.6 % with partial response. Grade 1 toxicity of the skin occurred in two patients and grade 1 hematological toxicity in 1 patient under concurrent chemoradiotherapy. Median overall survival was 3.9 months with a median follow-up of 45 months. The use of EBRT for skull base metastases with symptomatic involvement of cranial nerves is marked by good therapeutic success in terms of neurological outcome, high feasibility and low toxicity rates. These findings underline EBRT as the standard therapeutic approach in the palliative setting. (orig.)

The application of finite element analysis in the skull biomechanics and dentistry.

Science.gov (United States)

Prado, Felippe Bevilacqua; Rossi, Ana Cláudia; Freire, Alexandre Rodrigues; Ferreira Caria, Paulo Henrique

2014-01-01

Empirical concepts describe the direction of the masticatory stress dissipation in the skull. The scientific evidence of the trajectories and the magnitude of stress dissipation can help in the diagnosis of the masticatory alterations and the planning of oral rehabilitation in the different areas of Dentistry. The Finite Element Analysis (FEA) is a tool that may reproduce complex structures with irregular geometries of natural and artificial tissues of the human body because it uses mathematical functions that enable the understanding of the craniofacial biomechanics. The aim of this study was to review the literature on the advantages and limitations of FEA in the skull biomechanics and Dentistry study. The keywords of the selected original research articles were: Finite element analysis, biomechanics, skull, Dentistry, teeth, and implant. The literature review was performed in the databases, PUBMED, MEDLINE and SCOPUS. The selected books and articles were between the years 1928 and 2010. The FEA is an assessment tool whose application in different areas of the Dentistry has gradually increased over the past 10 years, but its application in the analysis of the skull biomechanics is scarce. The main advantages of the FEA are the realistic mode of approach and the possibility of results being based on analysis of only one model. On the other hand, the main limitation of the FEA studies is the lack of anatomical details in the modeling phase of the craniofacial structures and the lack of information about the material properties.

Fractionated external beam radiotherapy of skull base metastases with cranial nerve involvement

International Nuclear Information System (INIS)

Droege, L.H.; Hinsche, T.; Hess, C.F.; Wolff, H.A.; Canis, M.; Alt-Epping, B.

2014-01-01

Skull base metastases frequently appear in a late stage of various tumor entities and cause pain and neurological disorders which strongly impair patient quality of life. This study retrospectively analyzed fractionated external beam radiotherapy (EBRT) as a palliative treatment approach with special respect to neurological outcome, feasibility and acute toxicity. A total of 30 patients with skull base metastases and cranial nerve disorders underwent EBRT with a mean total dose of 31.6 Gy. Neurological status was assessed before radiotherapy, during radiotherapy and 2 weeks afterwards categorizing orbital, parasellar, middle fossa, jugular foramen and occipital condyle involvement and associated clinical syndromes. Neurological outcome was scored as persistence of symptoms, partial response, good response and complete remission. Treatment-related toxicity and overall survival were assessed. Before EBRT 37 skull base involvement syndromes were determined with 4 patients showing more than 1 syndrome. Of the patients 81.1 % responded to radiotherapy with 10.8 % in complete remission, 48.6 % with good response and 21.6 % with partial response. Grade 1 toxicity of the skin occurred in two patients and grade 1 hematological toxicity in 1 patient under concurrent chemoradiotherapy. Median overall survival was 3.9 months with a median follow-up of 45 months. The use of EBRT for skull base metastases with symptomatic involvement of cranial nerves is marked by good therapeutic success in terms of neurological outcome, high feasibility and low toxicity rates. These findings underline EBRT as the standard therapeutic approach in the palliative setting. (orig.)

COMPARATIVE ANALYSIS OF ELECTRICAL AND THERMAL CONTROL OF THE LINING STATE OF INDUCTION APPARATUS OF COPPER WIRE MANUFACTURE

Directory of Open Access Journals (Sweden)

V. M. Zolotaryov

2018-02-01

Full Text Available Aim. This article is intended to develop a technique for monitoring the lining state of induction channel furnaces for melting oxygen-free copper by monitoring changes in the distribution of thermal fields in their lining and carrying out a comparative analysis of the developed technique with the existing one that controls the electrical resistance of the melting channel of the furnaces. Technique. For carrying out the research, the theories of electromagnetic field, thermodynamics, mathematical physics, mathematical modeling based on the finite element method were used. Results. A technique for diagnosing the lining state of the induction channel furnaces for melting oxygen-free copper has been developed, which makes it possible to determine the dislocation and the size of the liquid metal leaks by analyzing the temperature distribution over the body surface both the inductor and the furnace. Scientific novelty. The connection between the temperature field distribution on the surface of the furnace body and the dislocation and dimensions of the liquid metal leaks in its lining is determined for the first time. Practical significance. Using the proposed technique will allow to conduct more accurate diagnostics of the lining conditions of the induction channel furnaces, as well as to determine the location and size of the liquid metal leaks, creating the basis for predicting the working life of the furnace.

Surgical resection of a huge cemento-ossifying fibroma in skull base by intraoral approach.

Science.gov (United States)

Cheng, Xiao-Bing; Li, Yun-Peng; Lei, De-Lin; Li, Xiao-Dong; Tian, Lei

2011-03-01

Cemento-ossifying fibroma, also known as ossifying fibroma, usually occurs in the mandible and less commonly in the maxilla. The huge example in the skull base is even rare. We present a case of a huge cemento-ossifying fibroma arising below the skull base of a 30-year-old woman patient. Radiologic investigations showed a giant, lobulated, heterogeneous calcified hard tissue mass, which is well circumscribed and is a mixture of radiolucent and radiopaque, situated at the rear of the right maxilla to the middle skull base. The tumor expands into the right maxillary sinus and the orbital cavity, fusing with the right maxilla at the maxillary tuberosity and blocking the bilateral choanas, which caused marked proptosis and blurred vision. The tumor was resected successfully by intraoral approach, and pathologic examination confirmed the lesion to be a cemento-ossifying fibroma. This case demonstrates that cemento-ossifying fibroma in the maxilla, not like in the mandible, may appear more aggressive because the extensive growth is unimpeded by anatomic obstacles and that the intraoral approach can be used to excise the tumor in the skull base.

A fiducial skull marker for precise MRI-based stereotaxic surgery in large animal models.

Science.gov (United States)

Glud, Andreas Nørgaard; Bech, Johannes; Tvilling, Laura; Zaer, Hamed; Orlowski, Dariusz; Fitting, Lise Moberg; Ziedler, Dora; Geneser, Michael; Sangill, Ryan; Alstrup, Aage Kristian Olsen; Bjarkam, Carsten Reidies; Sørensen, Jens Christian Hedemann

2017-06-15

Stereotaxic neurosurgery in large animals is used widely in different sophisticated models, where precision is becoming more crucial as desired anatomical target regions are becoming smaller. Individually calculated coordinates are necessary in large animal models with cortical and subcortical anatomical differences. We present a convenient method to make an MRI-visible skull fiducial for 3D MRI-based stereotaxic procedures in larger experimental animals. Plastic screws were filled with either copper-sulfate solution or MRI-visible paste from a commercially available cranial head marker. The screw fiducials were inserted in the animal skulls and T1 weighted MRI was performed allowing identification of the inserted skull marker. Both types of fiducial markers were clearly visible on the MRÍs. This allows high precision in the stereotaxic space. The use of skull bone based fiducial markers gives high precision for both targeting and evaluation of stereotaxic systems. There are no metal artifacts and the fiducial is easily removed after surgery. The fiducial marker can be used as a very precise reference point, either for direct targeting or in evaluation of other stereotaxic systems. Copyright © 2017 Elsevier B.V. All rights reserved.

Imaging basilar skull fractures in the horse: a review

International Nuclear Information System (INIS)

Ramirez, O. III; Jorgensen, J.S.; Thrall, D.E.

1998-01-01

Due to the complex nature of the anatomy of the equine head, superimposition of numerous structures, and poor soft tissue differentiation, radiography may be of limited value in the diagnosis of basilar skull fractures. However, in many horses radiographic changes such as soft tissue opacification of the guttural pouch region, irregular bone margination at the sphenooccipital line, attenuation of the nasopharynx, ventral displacement of the dorsal pharyngeal wall and the presence of irregularly shaped bone fragments in the region of the guttural pouches are suggestive of a fracture of the skull base. These findings in conjunction with physical examination findings and historical information may lead to a presumptive diagnosis of a fracture. When available and when the patient will accommodate the equipment, computed tomography may give a definitive diagnosis owing to its superior resolution and differentiation of soft tissue structures

Characterization of Ceramic Material Produced From a Cold Crucible Induction Melter Test

Energy Technology Data Exchange (ETDEWEB)

Amoroso, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Marra, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2015-04-30

This report summarizes the results from characterization of samples from a melt processed surrogate ceramic waste form. Completed in October of 2014, the first scaled proof of principle cold crucible induction melter (CCIM) test was conducted to process a Fe-hollandite-rich titanate ceramic for treatment of high level nuclear waste. X-ray diffraction, electron microscopy, inductively coupled plasma-atomic emission spectroscopy (and inductively coupled plasma-mass spectroscopy for Cs), and product consistency tests were used to characterize the CCIM material produced. Core samples at various radial locations from the center of the CCIM were taken. These samples were also sectioned and analyzed vertically. Together, the various samples were intended to provide an indication of the homogeneity throughout the CCIM with respect to phase assemblage, chemical composition, and chemical durability. Characterization analyses confirmed that a crystalline ceramic with desirable phase assemblage was produced from a melt using a CCIM. Hollandite and zirconolite were identified in addition to possible highly-substituted pyrochlore and perovskite. Minor phases rich in Fe, Al, or Cs were also identified. Remarkably only minor differences were observed vertically or radially in the CCIM material with respect to chemical composition, phase assemblage, and durability. This recent CCIM test and the resulting characterization in conjunction with demonstrated compositional improvements support continuation of CCIM testing with an improved feed composition and improved melter system.

Geometric and mechanical evaluation of 3D-printing materials for skull base anatomical education and endoscopic surgery simulation - A first step to create reliable customized simulators.

Directory of Open Access Journals (Sweden)

Valentin Favier

Full Text Available Endoscopic skull base surgery allows minimal invasive therapy through the nostrils to treat infectious or tumorous diseases. Surgical and anatomical education in this field is limited by the lack of validated training models in terms of geometric and mechanical accuracy. We choose to evaluate several consumer-grade materials to create a patient-specific 3D-printed skull base model for anatomical learning and surgical training.Four 3D-printed consumer-grade materials were compared to human cadaver bone: calcium sulfate hemihydrate (named Multicolor, polyamide, resin and polycarbonate. We compared the geometric accuracy, forces required to break thin walls of materials and forces required during drilling.All materials had an acceptable global geometric accuracy (from 0.083mm to 0.203mm of global error. Local accuracy was better in polycarbonate (0.09mm and polyamide (0.15mm than in Multicolor (0.90mm and resin (0.86mm. Resin and polyamide thin walls were not broken at 200N. Forces needed to break Multicolor thin walls were 1.6-3.5 times higher than in bone. For polycarbonate, forces applied were 1.6-2.5 times higher. Polycarbonate had a mode of fracture similar to the cadaver bone. Forces applied on materials during drilling followed a normal distribution except for the polyamide which was melted. Energy spent during drilling was respectively 1.6 and 2.6 times higher on bone than on PC and Multicolor.Polycarbonate is a good substitute of human cadaver bone for skull base surgery simulation. Thanks to short lead times and reasonable production costs, patient-specific 3D printed models can be used in clinical practice for pre-operative training, improving patient safety.

Tin in granitic melts: The role of melting temperature and protolith composition

Science.gov (United States)

Wolf, Mathias; Romer, Rolf L.; Franz, Leander; López-Moro, Francisco Javier

2018-06-01

Granite bound tin mineralization typically is seen as the result of extreme magmatic fractionation and late exsolution of magmatic fluids. Mineralization, however, also could be obtained at considerably less fractionation if initial melts already had enhanced Sn contents. We present chemical data and results from phase diagram modeling that illustrate the dominant roles of protolith composition, melting conditions, and melt extraction/evolution for the distribution of Sn between melt and restite and, thus, the Sn content of melts. We compare the element partitioning between leucosome and restite of low-temperature and high-temperature migmatites. During low-temperature melting, trace elements partition preferentially into the restite with the possible exception of Sr, Cd, Bi, and Pb, that may be enriched in the melt. In high-temperature melts, Ga, Y, Cd, Sn, REE, Pb, Bi, and U partition preferentially into the melt whereas Sc, V, Cr, Co, Ni, Mo, and Ba stay in the restite. This contrasting behavior is attributed to the stability of trace element sequestering minerals during melt generation. In particular muscovite, biotite, titanite, and rutile act as host phases for Sn and, therefore prevent Sn enrichment in the melt as long as they are stable phases in the restite. As protolith composition controls both the mineral assemblage and modal contents of the various minerals, protolith composition eventually also controls the fertility of a rock during anatexis, restite mineralogy, and partitioning behavior of trace metals. If a particular trace element is sequestered in a phase that is stable during partial melting, the resulting melt is depleted in this element whereas the restite becomes enriched. Melt generation at high temperature may release Sn when Sn-hosts become unstable. If melt has not been lost before the breakdown of Sn-hosts, Sn contents in the melt will increase but never will be high. In contrast, if melt has been lost before the decomposition of Sn

Persistent Neutrophilic Meningitis in an Immunocompetent Patient after Basilar Skull Fracture: Case Report

Directory of Open Access Journals (Sweden)

Uslan Daniel Z

2011-05-01

Full Text Available Abstract Background Persistent neutrophilic meningitis is an unusual form of chronic meningitis that is defined as clinical meningitis with a neutrophilic pleocytosis that persists for greater than 7 days despite empiric antimicrobial therapy. Although numerous disease processes can cause this syndrome, the majority of cases are due to opportunistic pathogens infecting immunocompromised hosts. Case Presentation A 47 year-old female presented after basilar skull fracture with persistent neutrophilic meningitis unresponsive to empiric broad-spectrum antibiotics. After more than weeks of intensive therapy, 4 hospitalizations and 3 relapses, Nocardia cyriacigeorgica was identified from cerebral spinal fluid. Induction therapy was begun with Ceftriaxone and trimethoprim-sulfamethoxazole (TMP-SMX for 6 weeks followed by therapy with TMP-SMX and doxycycline for one year. The patient made a complete recovery without sequelae. Conclusions Due to the difficulty in obtaining a microbiologic diagnosis, appropriate treatment in cases of persistent neutrophilic meningitis is often delayed leading to morbidity, This case highlights a number of the unique features of Nocardia meningitis and the importance of considering Nocardia infection as a cause of persistent neutrophilic meningitis even in immunocompetent patients.

A new head phantom with realistic shape and spatially varying skull resistivity distribution.

Science.gov (United States)

Li, Jian-Bo; Tang, Chi; Dai, Meng; Liu, Geng; Shi, Xue-Tao; Yang, Bin; Xu, Can-Hua; Fu, Feng; You, Fu-Sheng; Tang, Meng-Xing; Dong, Xiu-Zhen

2014-02-01

Brain electrical impedance tomography (EIT) is an emerging method for monitoring brain injuries. To effectively evaluate brain EIT systems and reconstruction algorithms, we have developed a novel head phantom that features realistic anatomy and spatially varying skull resistivity. The head phantom was created with three layers, representing scalp, skull, and brain tissues. The fabrication process entailed 3-D printing of the anatomical geometry for mold creation followed by casting to ensure high geometrical precision and accuracy of the resistivity distribution. We evaluated the accuracy and stability of the phantom. Results showed that the head phantom achieved high geometric accuracy, accurate skull resistivity values, and good stability over time and in the frequency domain. Experimental impedance reconstructions performed using the head phantom and computer simulations were found to be consistent for the same perturbation object. In conclusion, this new phantom could provide a more accurate test platform for brain EIT research.

Postnatal development of the anterior skull base and nasal septum: CT study

International Nuclear Information System (INIS)

Kim, Kwan Soo; Kim, Hyung Jin; Lee, Kyung Hee; Roh, Hong Gee; Lim, Myung Kwan

2002-01-01

To know the normal CT appearance of the anterior skull base and nasal septum after birth. Coronal CT scans with a helical mode were performed from the nasal bone to the sphenoid sinus in 99 children whose ages ranged from 27 days to 14 years. We investigated the CT appearance of the developing anterior skull base and nasal septum with particular attention to the anteroposterior length of the anterior skull base and the ossification patterns of the cribriform plate, perpendicular plate, crista galli, and vomer. The anteroposterior length of the anterior skull base statistically significantly increased with age. The cribriform plate showed partial or complete ossification in at least one segment at more than 3 months of age and in all three segments at more than 6 months of age. Ossification of the cribriform plate occurred earlier in the middle segment than in the anterior and posterior segments. It began exclusively in the region of the lateral mass of the ethmoid and proceeded medially toward the crista galli. Partial ossification of the perpendicular plate was noted as early as 9 months of age, and complete ossification as early as 13 months of age. All children at 18 months and older showed at least partial ossification of the perpendicular plate. Partial ossification of the crista galli was noted as early as 27 days of age, and complete ossification as early as 3 months of age. CT showed complete ossification of the crista galli in all but two children at 6 months and older. The superior aspect of the vomer exhibited a V- or Y-shape on all CT scans in 66%(65/99) of children at any age. It appeared as an undivided single lump anteriorly and a V or Y posteriorly in 34%(34/99). Knowledge of the normal developing patterns of ossification of the anterior skull base and nasal septum could help prevent errors in interpreting CT scans in this region, especially in infants and young children

Comparative Study on Two Melting Simulation Methods: Melting Curve of Gold

International Nuclear Information System (INIS)

Liu Zhong-Li; Li Rui; Sun Jun-Sheng; Zhang Xiu-Lu; Cai Ling-Cang

2016-01-01

Melting simulation methods are of crucial importance to determining melting temperature of materials efficiently. A high-efficiency melting simulation method saves much simulation time and computational resources. To compare the efficiency of our newly developed shock melting (SM) method with that of the well-established two-phase (TP) method, we calculate the high-pressure melting curve of Au using the two methods based on the optimally selected interatomic potentials. Although we only use 640 atoms to determine the melting temperature of Au in the SM method, the resulting melting curve accords very well with the results from the TP method using much more atoms. Thus, this shows that a much smaller system size in SM method can still achieve a fully converged melting curve compared with the TP method, implying the robustness and efficiency of the SM method. (paper)

Evaluation of Three Cases Using a Novel Titanium Mesh System—Skull-Fit® with Orbital Wall (Skull-Fit WOW®)—For Cranial Base Reconstructions

Science.gov (United States)

Hattori, Noriko; Nakajima, Hideo; Tamada, Ikkei; Sakamoto, Yoshiaki; Ohira, Takayuki; Yoshida, Kazunari; Kawase, Takeshi; Kishi, Kazuo

2011-01-01

Cranial base reconstructions associated with tumor resections around the orbital wall often require that both the upper and lateral orbital walls be reconstructed during a single procedure. Previously, we used titanium mesh plates that were preoperatively fabricated based on three-dimensional models. Although these plates are precise and do not increase the probability of infection, we still had to use autologous bones to reconstruct the orbital walls. Recently, we developed a new titanium mesh plate—called Skull-Fit®—with orbital wall (Skull-Fit WOW®), enabling us to reconstruct the cranial base and orbital walls without bone grafts. Here, we report on three reconstruction cases in which the novel titanium mesh-orbital wall system was used. In all three cases, the customized titanium mesh system performed satisfactorily with little, if any, complications. PMID:22451827

An Account of the Inaugural Tessier Skull Exhibition at the University of Paris Descartes.

Science.gov (United States)

Dusseldorp, Joseph Richard; Firmin, Françoise

2015-10-01

Paul Tessier is widely regarded as the father of modern craniofacial surgery. Upon his passing in 2008, his private collection of human skulls was purchased by the French Association of Facial Surgeons to ensure the collection would remain in France. The first public exhibition of the skulls was held in the medical museum of the University of Paris Descartes in April 2014. From this collection of skulls and the imagination of Tessier an entirely new specialty was created. Modern craniofacial surgery, now is an integral part of any pediatric plastic surgery department. Cranial and facial osteotomies have also become commonplace in both traumatic and aesthetic surgery. The goals for craniofacial deformity are now a return to completely normal appearance and function, as Tessier always believed they should be.

Aspergillus Osteomyelitis of the Skull.

Science.gov (United States)

Nicholson, Simon; King, Richard; Chumas, Paul; Russell, John; Liddington, Mark

2016-07-01

Osteomyelitis of the craniofacial skeleton is rare, with fungal pathogens least commonly implicated. The authors present 2 patients of osteomyelitis of the skull caused by Aspergillus spp. and discuss the diagnosis, clinicopathological course, and management strategies.Late recurrence seen in this type of infection warrants long-term follow-up and a high index of suspicion for the clinical signs associated with recurrence.Such patients would benefit from their surgical debridement being planned and managed via a specialist craniofacial unit, so as to utilize the most aesthetically sensitive approach and the experience of specialists from several surgical disciplines.

The role of stereotactic radiosurgery in the treatment of malignant skull base tumors

International Nuclear Information System (INIS)

Miller, Robert C.; Foote, Robert L.; Coffey, Robert J.; Gorman, Deborah A.; Earle, John D.; Schomberg, Paula J.; Kline, Robert W.

1997-01-01

Purpose: To determine the efficacy and toxicity of stereotactic radiosurgery in the treatment of malignant skull base tumors. Methods and Materials: Thirty-two patients with 35 newly diagnosed or recurrent malignant skull base tumors ≤33.5 cm 3 were treated using the Leksell Gamma unit. Tumor histologies included: adenoid cystic carcinoma, basal cell carcinoma, chondrosarcoma, chordoma, nasopharyngeal carcinoma, osteogenic sarcoma, and squamous cell carcinoma. Results: After a median follow-up of 2.3 years, 83% ± 15% (±95% confidence interval) of patients experienced a symptomatic response to treatment. Local control at the skull base was 95 ± 9% at 2 years and 78 ± 23% at 3 years. Local-regional control above the clavicles was 75 ± 15% at 1 year and 51 ± 20% at 2 years. Overall and cause specific survival were identical, 82 ± 13% at 1 year, 76 ± 14% at 2 years, and 72 ± 16% at 3 years. One patient developed a radiation-induced optic neuropathy 12 months after radiosurgery. Conclusion: Stereotactic radiosurgery using the Leksell Gamma Unit can provide durable tumor control and symptomatic relief with acceptable toxicity in the majority of patients with malignant tumors 4 cm or less in size involving the skull base. Further evaluation of more patients with longer follow-up is warranted

Cranial Suture Closure in Domestic Dog Breeds and Its Relationships to Skull Morphology.

Science.gov (United States)

Geiger, Madeleine; Haussman, Sinah

2016-04-01

Bulldog-type brachycephalic domestic dog breeds are characterized by a relatively short and broad skull with a dorsally rotated rostrum (airorhynchy). Not much is known about the association between a bulldog-type skull conformation and peculiar patterns of suture and synchondrosis closure in domestic dogs. In this study, we aim to explore breed-specific patterns of cranial suture and synchondrosis closure in relation to the prebasial angle (proxy for airorhynchy and thus bulldog-type skull conformation) in domestic dogs. For this purpose, we coded closure of 18 sutures and synchondroses in 26 wolves, that is, the wild ancestor of all domestic dogs, and 134 domestic dogs comprising 11 breeds. Comparisons of the relative amount of closing and closed sutures and synchondroses (closure scores) in adult individuals showed that bulldog-type breeds have significantly higher closure scores than non-bulldog-type breeds and that domestic dogs have significantly higher closure scores than the wolf. We further found that the prebasial angle is significantly positively correlated with the amount of closure of the basispheno-presphenoid synchondrosis and sutures of the nose (premaxillo-nasal and maxillo-nasal) and the palate (premaxillo-maxillary and interpalatine). Our results show that there is a correlation between patterns of suture and synchondrosis closure and skull shape in domestic dogs, although the causal relationships remain elusive. © 2016 Wiley Periodicals, Inc.

Normal Development of Sutures and synchondroses in the central skull base : CT study

International Nuclear Information System (INIS)

Roh, Hong Gee; Kim, Hyung Jin; Kang, Jee Hee; Lee, Kyung Hee; Lim, Myung Kwan; Cho, Young Kuk; Ok, Cheol Su; Suh, Chang Hae

2000-01-01

To evaluate the developmental patterns of the sutures and synchondroses in the central skull base. We evaluated the CT scans of 109 children (age range 29 days to 15 years) with no skull base abnormality who had undergone axial CT of the skull base with 1-mm collimation. Using a five-tier scheme, we analyzed the developmental patterns of the 18 sutures and synchondroses related to the sphenoid and occipital bones. Fusion of the sutures and synchondroses related to the sphenoid bone progressed rapidly during the first two years. Thereafter, changes in the sphenoid bone were dominated by pneumatization of the sphenoid sinus. Fusion of the synchondroses within the sphenoid body, including intersphenoidal, intrapresphenoidal, intrapostsphenoidal synchondrosis occurred early and in most cases was graded ≥3D4. Fusion of the sphenosquamosal, sphenoethmoidal, and frontosphenoidal sutures was delayed, and residual sclerosis was a common finding. Except for Kerckring-supraoccipital synchondrosis, fusion of the six sutures and synchondroses related to the occipital bone occurred more gradually than that of those related to the sphenoid bone. Among these, fusion of the occipitomastoidal suture and petro-occipital synchondrosis was the last to occur. A knowledge of the developmental patterns of sutures and synchondroses can help differentiate normal conditions from those such as fracture, osseous dysplasia, or congenital malformation, which are abnormal. Our results provide certain basic information about skull base maturity in children. (author)

Sonographic Analysis of Changes in Skull Shape After Cranial Molding Helmet Therapy in Infants With Deformational Plagiocephaly.

Science.gov (United States)

Kwon, Dong Rak

2016-04-01

-The purpose of this study was to investigate the changes in skull shape on sonography after cranial molding helmet therapy in infants with deformational plagiocephaly. -Twenty-six infants who were treated with cranial molding helmet therapy were recruited. Caliper and sonographic measurements were performed. The lateral length of the affected and unaffected sides of the skull and cranial vault asymmetry index were measured with calipers. The occipital angle, defined as the angle between lines projected along the lambdoid sutures of the skull, was calculated by sonography. The occipital angle difference and occipital angle ratio were also measured. All caliper and sonographic measurements were performed in each infant twice before and twice after treatment. -The study group included 12 male and 14 female infants with a mean age ± SD of 6.2 ± 3.5 months. The mean treatment duration was 6.0 ± 2.5 months. The difference in lateral length before and after helmet therapy was significantly greater on the affected skull than the unaffected skull (16.7 ± 12.7 versus 9.0 ± 13.4 mm; P skull than the unaffected skull (-5.7° ± 7.3° versus 4.2° ± 7.9°; P < .01). The cranial vault asymmetry index and occipital angle ratio were significantly reduced after helmet therapy (cranial vault asymmetry index, 9.3% ± 2.3% versus 3.5% ± 3.0%; occipital angle ratio, 1.07 ± 0.05 versus 1.01 ± 0.01; P < .05). -These results suggest that occipital angle measurements using sonography, combined with cephalometry, could provide a better understanding of the therapeutic effects of cranial molding helmet therapy in infants with deformational plagiocephaly. © 2016 by the American Institute of Ultrasound in Medicine.

Prediction of skull fracture risk for children 0-9 months old through validated parametric finite element model and cadaver test reconstruction.

Science.gov (United States)

Li, Zhigang; Liu, Weiguo; Zhang, Jinhuan; Hu, Jingwen

2015-09-01

Skull fracture is one of the most common pediatric traumas. However, injury assessment tools for predicting pediatric skull fracture risk is not well established mainly due to the lack of cadaver tests. Weber conducted 50 pediatric cadaver drop tests for forensic research on child abuse in the mid-1980s (Experimental studies of skull fractures in infants, Z Rechtsmed. 92: 87-94, 1984; Biomechanical fragility of the infant skull, Z Rechtsmed. 94: 93-101, 1985). To our knowledge, these studies contained the largest sample size among pediatric cadaver tests in the literature. However, the lack of injury measurements limited their direct application in investigating pediatric skull fracture risks. In this study, 50 pediatric cadaver tests from Weber's studies were reconstructed using a parametric pediatric head finite element (FE) model which were morphed into subjects with ages, head sizes/shapes, and skull thickness values that reported in the tests. The skull fracture risk curves for infants from 0 to 9 months old were developed based on the model-predicted head injury measures through logistic regression analysis. It was found that the model-predicted stress responses in the skull (maximal von Mises stress, maximal shear stress, and maximal first principal stress) were better predictors than global kinematic-based injury measures (peak head acceleration and head injury criterion (HIC)) in predicting pediatric skull fracture. This study demonstrated the feasibility of using age- and size/shape-appropriate head FE models to predict pediatric head injuries. Such models can account for the morphological variations among the subjects, which cannot be considered by a single FE human model.

Measurement and Finite Element Model Validation of Immature Porcine Brain-Skull Displacement during Rapid Sagittal Head Rotations.

Science.gov (United States)

Pasquesi, Stephanie A; Margulies, Susan S

2018-01-01

Computational models are valuable tools for studying tissue-level mechanisms of traumatic brain injury, but to produce more accurate estimates of tissue deformation, these models must be validated against experimental data. In this study, we present in situ measurements of brain-skull displacement in the neonatal piglet head ( n  = 3) at the sagittal midline during six rapid non-impact rotations (two rotations per specimen) with peak angular velocities averaging 51.7 ± 1.4 rad/s. Marks on the sagittally cut brain and skull/rigid potting surfaces were tracked, and peak values of relative brain-skull displacement were extracted and found to be significantly less than values extracted from a previous axial plane model. In a finite element model of the sagittally transected neonatal porcine head, the brain-skull boundary condition was matched to the measured physical experiment data. Despite smaller sagittal plane displacements at the brain-skull boundary, the corresponding finite element boundary condition optimized for sagittal plane rotations is far less stiff than its axial counterpart, likely due to the prominent role of the boundary geometry in restricting interface movement. Finally, bridging veins were included in the finite element model. Varying the bridging vein mechanical behavior over a previously reported range had no influence on the brain-skull boundary displacements. This direction-specific sagittal plane boundary condition can be employed in finite element models of rapid sagittal head rotations.

Measurement and Finite Element Model Validation of Immature Porcine Brain–Skull Displacement during Rapid Sagittal Head Rotations

Science.gov (United States)

Pasquesi, Stephanie A.; Margulies, Susan S.

2018-01-01

Computational models are valuable tools for studying tissue-level mechanisms of traumatic brain injury, but to produce more accurate estimates of tissue deformation, these models must be validated against experimental data. In this study, we present in situ measurements of brain–skull displacement in the neonatal piglet head (n = 3) at the sagittal midline during six rapid non-impact rotations (two rotations per specimen) with peak angular velocities averaging 51.7 ± 1.4 rad/s. Marks on the sagittally cut brain and skull/rigid potting surfaces were tracked, and peak values of relative brain–skull displacement were extracted and found to be significantly less than values extracted from a previous axial plane model. In a finite element model of the sagittally transected neonatal porcine head, the brain–skull boundary condition was matched to the measured physical experiment data. Despite smaller sagittal plane displacements at the brain–skull boundary, the corresponding finite element boundary condition optimized for sagittal plane rotations is far less stiff than its axial counterpart, likely due to the prominent role of the boundary geometry in restricting interface movement. Finally, bridging veins were included in the finite element model. Varying the bridging vein mechanical behavior over a previously reported range had no influence on the brain–skull boundary displacements. This direction-specific sagittal plane boundary condition can be employed in finite element models of rapid sagittal head rotations. PMID:29515995

Experimental demonstration of passive acoustic imaging in the human skull cavity using CT-based aberration corrections.

Science.gov (United States)

Jones, Ryan M; O'Reilly, Meaghan A; Hynynen, Kullervo

2015-07-01

Experimentally verify a previously described technique for performing passive acoustic imaging through an intact human skull using noninvasive, computed tomography (CT)-based aberration corrections Jones et al. [Phys. Med. Biol. 58, 4981-5005 (2013)]. A sparse hemispherical receiver array (30 cm diameter) consisting of 128 piezoceramic discs (2.5 mm diameter, 612 kHz center frequency) was used to passively listen through ex vivo human skullcaps (n = 4) to acoustic emissions from a narrow-band fixed source (1 mm diameter, 516 kHz center frequency) and from ultrasound-stimulated (5 cycle bursts, 1 Hz pulse repetition frequency, estimated in situ peak negative pressure 0.11-0.33 MPa, 306 kHz driving frequency) Definity™ microbubbles flowing through a thin-walled tube phantom. Initial in vivo feasibility testing of the method was performed. The performance of the method was assessed through comparisons to images generated without skull corrections, with invasive source-based corrections, and with water-path control images. For source locations at least 25 mm from the inner skull surface, the modified reconstruction algorithm successfully restored a single focus within the skull cavity at a location within 1.25 mm from the true position of the narrow-band source. The results obtained from imaging single bubbles are in good agreement with numerical simulations of point source emitters and the authors' previous experimental measurements using source-based skull corrections O'Reilly et al. [IEEE Trans. Biomed. Eng. 61, 1285-1294 (2014)]. In a rat model, microbubble activity was mapped through an intact human skull at pressure levels below and above the threshold for focused ultrasound-induced blood-brain barrier opening. During bursts that led to coherent bubble activity, the location of maximum intensity in images generated with CT-based skull corrections was found to deviate by less than 1 mm, on average, from the position obtained using source-based corrections. Taken

Electrochemical behavior of Th(IV) and its electrodeposition from ThF_4-LiCl-KCl melt

International Nuclear Information System (INIS)

Wang, Xianbin; Huang, Wei; Gong, Yu; Jiang, Feng; Zheng, Haiyang; Zhu, Tiejian; Long, Dewu; Li, Qingnuan

2016-01-01

The electrochemical behavior of Th(IV) ion on molybdenum (Mo) electrode was studied by cyclic voltammetry (CV) and square wave voltammetry (SWV) technologies at 773 K in ThF_4-LiCl-KCl melt. The reduction of Th(IV) to metal Th at −1.67 V (vs. Ag/AgCl) is a four-electron exchange process, which is quasi-reversible and diffusion-controlled. The diffusion coefficient (D) and activation energy of diffusion process for Th(IV) were determined to be 3.77 × 10"−"5 cm"2 s"−"1 and 59.2 kJ mol"−"1. The pulse potential electrolysis of ThF_4-LiCl-KCl melt revealed that 86.8% of Th(IV) can be separated from the melt based on the inductively coupled plasma atomic emission spectrometer (ICP-AES) results.

Human skulls with turquoise inlays: pre hispanic origin or replicas?

International Nuclear Information System (INIS)

Silva V, Y.; Castillo M, M.T.; Bautista M, J.P.; Arenas A, J.

2006-01-01

The lack of archaeological context determining if the manufacture of two human skulls adorned with turquoise inlays have pre-Columbian origin or not (replicas), led to perform other studies. Under these conditions, besides orthodox methodology commonly used to assign chronology and cultural aspects as form, style, decoration, iconography, etc., it was necessary to obtain more results based on the use of characterization techniques. The techniques employed were Scanning Electron Microscopy (SEM), X-Ray Energy Dispersive Spectroscopy (EDS), Transmission Electron Microscopy (TEM) and Fourier Transform Infrared Spectroscopy (FTIR), in order to determine the manufacture techniques and chemical composition of the materials used for the cementant. SEM analysis showed the presence of zones composed by Ca, O, C and Al. In some cases Mg, Cl, Fe and Pb were identified. High concentration of Cu was present in all samples, due to residues of turquoise inlays (CuAI 6 (PO 4 ) 4 (OH) 8 (H 2 O) 4 ) with which the skulls were decorated. In the cementant was identified the Ca as base element of the cementant, as well as particles < 100 nm with irregular morphology and other amorphous zones. FTIR spectrums indicated the presence of organic substances that could be used as agglutinating in the cementant. The current work shows a progress identifying involved techniques in the manufacturing of two human skulls with turquoise inlays. (Author)

Viscoelastic finite-element analysis of human skull - dura mater ...

African Journals Online (AJOL)

SERVER

2008-03-18

Mar 18, 2008 ... The elastic-viscous mechanical characteristics must be used for the skull. The viscous strains .... different actions for fresh human dura mater (L0 = 23 mm, θ = 370). f. Creep compliance .... 3180±300. 4026±372. *. 1. 0. E. E.

Osteochondroma of the skull base: MRI and histological correlation

International Nuclear Information System (INIS)

Sato, K.; Kodera, T.; Kitai, R.; Kubota, T.

1996-01-01

A skull base osteochondroma (benign exostosis) in a 38-year-old man is reported. MRI was not only very useful for determining the extent of the tumour, but also showed its far content and, on contrast-enhanced fat-suppressed images, its vascularity. (orig.)

Creating a normative database of age-specific 3D geometrical data, bone density, and bone thickness of the developing skull: a pilot study.

Science.gov (United States)

Delye, Hans; Clijmans, Tim; Mommaerts, Maurice Yves; Sloten, Jos Vnder; Goffin, Jan

2015-12-01

Finite element models (FEMs) of the head are used to study the biomechanics of traumatic brain injury and depend heavily on the use of accurate material properties and head geometry. Any FEM aimed at investigating traumatic head injury in children should therefore use age-specific dimensions of the head, as well as age-specific material properties of the different tissues. In this study, the authors built a database of age-corrected skull geometry, skull thickness, and bone density of the developing skull to aid in the development of an age-specific FEM of a child's head. Such a database, containing age-corrected normative skull geometry data, can also be used for preoperative surgical planning and postoperative long-term follow-up of craniosynostosis surgery results. Computed tomography data were processed for 187 patients (age range 0-20 years old). A 3D surface model was calculated from segmented skull surfaces. Skull models, reference points, and sutures were processed into a MATLAB-supported database. This process included automatic calculation of 2D measurements as well as 3D measurements: length of the coronal suture, length of the lambdoid suture, and the 3D anterior-posterior length, defined as the sum of the metopic and sagittal suture. Skull thickness and skull bone density calculations were included. Cephalic length, cephalic width, intercoronal distance, lateral orbital distance, intertemporal distance, and 3D measurements were obtained, confirming the well-established general growth pattern of the skull. Skull thickness increases rapidly in the first year of life, slowing down during the second year of life, while skull density increases with a fast but steady pace during the first 3 years of life. Both skull thickness and density continue to increase up to adulthood. This is the first report of normative data on 2D and 3D measurements, skull bone thickness, and skull bone density for children aged 0-20 years. This database can help build an age

Olivine/melt transition metal partitioning, melt composition, and melt structure—Melt polymerization and Qn-speciation in alkaline earth silicate systems

Science.gov (United States)

Mysen, Bjorn O.

2008-10-01

The two most abundant network-modifying cations in magmatic liquids are Ca 2+ and Mg 2+. To evaluate the influence of melt structure on exchange of Ca 2+ and Mg 2+ with other geochemically important divalent cations ( m-cations) between coexisting minerals and melts, high-temperature (1470-1650 °C), ambient-pressure (0.1 MPa) forsterite/melt partitioning experiments were carried out in the system Mg 2SiO 4-CaMgSi 2O 6-SiO 2 with ⩽1 wt% m-cations (Mn 2+, Co 2+, and Ni 2+) substituting for Ca 2+ and Mg 2+. The bulk melt NBO/Si-range ( NBO/Si: nonbridging oxygen per silicon) of melt in equilibrium with forsterite was between 1.89 and 2.74. In this NBO/Si-range, the NBO/Si(Ca) (fraction of nonbridging oxygens, NBO, that form bonds with Ca 2+, Ca 2+- NBO) is linearly related to NBO/Si, whereas fraction of Mg 2+- NBO bonds is essentially independent of NBO/Si. For individual m-cations, rate of change of KD( m-Mg) with NBO/Si(Ca) for the exchange equilibrium, mmelt + Mg olivine ⇌ molivine + Mg melt, is linear. KD( m-Mg) decreases as an exponential function of increasing ionic potential, Z/ r2 ( Z: formal electrical charge, r: ionic radius—here calculated with oxygen in sixfold coordination around the divalent cations) of the m-cation. The enthalpy change of the exchange equilibrium, Δ H, decreases linearly with increasing Z/ r2 [Δ H = 261(9)-81(3)· Z/ r2 (Å -2)]. From existing information on (Ca,Mg)O-SiO 2 melt structure at ambient pressure, these relationships are understood by considering the exchange of divalent cations that form bonds with nonbridging oxygen in individual Qn-species in the melts. The negative ∂ KD( m-Mg) /∂( Z/ r2) and ∂(Δ H)/∂( Z/ r2) is because increasing Z/ r2 is because the cations forming bonds with nonbridging oxygen in increasingly depolymerized Qn-species where steric hindrance is decreasingly important. In other words, principles of ionic size/site mismatch commonly observed for trace and minor elements in crystals, also

Radiological assessment of skull base changes in children with syndromic craniosynostosis: role of ''minor'' sutures

Energy Technology Data Exchange (ETDEWEB)

Calandrelli, Rosalinda; D' Apolito, Gabriella; Gaudino, Simona; Stefanetti, Mariangela; Colosimo, Cesare [Universita Cattolica Sacro Cuore, Institute of Radiology, Rome (Italy); Massimi, Luca; Di Rocco, Concezio [Universita Cattolica Sacro Cuore, Institute of Neurosurgery, Rome (Italy)

2014-10-15

This study aims to identify the premature synostosis of ''major'' and ''minor'' sutures of the four ''sutural arches'' of the skull and to perform a morphometric analysis in children with syndromic craniosynostosis in order to evaluate changes in the skull base linked with premature suture synostosis. We reviewed multiplanar high-resolution CT images, implemented with 3D reconstructions, from 18 patients with complex syndromic craniosynostosis and compared them with 18 age-matched healthy subjects. We assessed the calvarial sutures and their extension to the skull base, and then we correlated specific types of synostosis with the size, shape and symmetry of the cranial fossae. We found a marked asymmetry of the skull base growth in all patients. The synostotic involvement around the coronal ring caused a reduction in the growth of the anterior and middle fossae. The size of the posterior cranial fossa was related not only to ''major'' but also to ''minor'' suture synostosis of the lambdoid and parieto-squamosal arches. Changes in the skull base and craniofacial axis symmetry are due to structural and functional relationships between ''major'' and ''minor'' skull sutures, suggesting a structural and functional relationship between the neurocranium and basicranium. The early recognition of prematurely closed skull base sutures may help clinicians and neurosurgeons to establish correct therapeutic approaches. (orig.)

Photographic Atlas and Three-Dimensional Reconstruction of the Holotype Skull of Euhelopus zdanskyi with Description of Additional Cranial Elements

Science.gov (United States)

Poropat, Stephen F.; Kear, Benjamin P.

2013-01-01

Background Euhelopus zdanskyi is one of relatively few sauropod taxa known from an almost complete skull and mandible. Recent phylogenetic analyses suggest that Euhelopus is a somphospondylan titanosauriform, and that it is a member of the clade (Euhelopodidae) which is the sister taxon to the hugely successful, dominantly Cretaceous sauropod group Titanosauria. Methodology/Principal Findings The skull elements of Euhelopus were CT scanned at Uppsala Akademiska Sjukhuset. Three-dimensional models of the elements were constructed from the DICOM data using Mimics 14.0, InVesalius 3.0, and GeoMagic Studio 2012, the skull was rearticulated in Rhinoceros 4.0, and the final version was rendered in GeoMagic Studio 2012. Conclusions/Significance The fact that relatively complete sauropod skulls are so rare in the fossil record, particularly among titanosauriforms, means that the skulls that are known should be as thoroughly described and well-illustrated as possible. This contribution supplements previous descriptions of the cranial elements of Euhelopus, one of the few euhelopodid taxa for which cranial material is known, by presenting a comprehensive photographic atlas of the skull elements to facilitate a better understanding of their morphology. We describe several elements which have been overlooked in past studies of Euhelopus, and also provide as accurate a reconstruction of the skull as possible (in the absence of the braincase), the most significant components of which are the articulations of the palate and the mandible. PMID:24278222

Fractionated external beam radiotherapy of skull base metastases with cranial nerve involvement.

Science.gov (United States)

Dröge, L H; Hinsche, T; Canis, M; Alt-Epping, B; Hess, C F; Wolff, H A

2014-02-01

Skull base metastases frequently appear in a late stage of various tumor entities and cause pain and neurological disorders which strongly impair patient quality of life. This study retrospectively analyzed fractionated external beam radiotherapy (EBRT) as a palliative treatment approach with special respect to neurological outcome, feasibility and acute toxicity. A total of 30 patients with skull base metastases and cranial nerve disorders underwent EBRT with a mean total dose of 31.6 Gy. Neurological status was assessed before radiotherapy, during radiotherapy and 2 weeks afterwards categorizing orbital, parasellar, middle fossa, jugular foramen and occipital condyle involvement and associated clinical syndromes. Neurological outcome was scored as persistence of symptoms, partial response, good response and complete remission. Treatment-related toxicity and overall survival were assessed. Before EBRT 37 skull base involvement syndromes were determined with 4 patients showing more than 1 syndrome. Of the patients 81.1 % responded to radiotherapy with 10.8 % in complete remission, 48.6 % with good response and 21.6 % with partial response. Grade 1 toxicity of the skin occurred in two patients and grade 1 hematological toxicity in 1 patient under concurrent chemoradiotherapy. Median overall survival was 3.9 months with a median follow-up of 45 months. The use of EBRT for skull base metastases with symptomatic involvement of cranial nerves is marked by good therapeutic success in terms of neurological outcome, high feasibility and low toxicity rates. These findings underline EBRT as the standard therapeutic approach in the palliative setting.

MRI-detected skull-base invasion. Prognostic value and therapeutic implication in intensity-modulated radiotherapy treatment for nasopharyngeal carcinoma

International Nuclear Information System (INIS)

Cheng, Yi-Kan; Jiang, Ning; Yue, Dan; Tang, Ling-Long; Zhang, Fan; Lin, Li; Liu, Xu; Chen, Lei; Ma, Jun; Liu, Li-Zhi

2014-01-01

With advances in imaging and radiotherapy, the prognostic value of skull-base invasion in nasopharyngeal carcinoma (NPC) needs to be reassessed. We aimed to define a classification system and evaluate the prognostic value of the classification of magnetic resonance imaging (MRI)-detected skull-base invasion in NPC treated with intensity-modulated radiotherapy (IMRT). We retrospectively reviewed 749 patients who underwent MRI and were subsequently histologically diagnosed with nondisseminated NPC and treated with IMRT. MRI-detected skull-base invasion was not found to be an independent prognostic factor for overall survival (OS), distant metastasis-free survival (DMFS), local relapse-free survival (LRFS), or disease-free survival (DFS; p > 0.05 for all). Skull-base invasion was classified according to the incidence of each site (type I sites inside pharyngobasilar fascia and clivus vs. type II sites outside pharyngobasilar fascia). The 5-year OS, DMFS, LRFS, and DFS rates in the classification of skull-base invasion in NPC were 83 vs. 67 %, 85 vs.75 %, 95 vs. 88 %, and 76 vs. 62 %, respectively (p [de

Endovascular treatment for arterial injuries of skull base

International Nuclear Information System (INIS)

Li Tianxiao; Bai Weixing; Zai Suiting; Wang Ziliang; Xue Jiangyu

2008-01-01

Objective: To explore the role of endovascular techniques in treatment for arterial injuries of skull base. Methods: A total of 53 consecutive cases suffered from skull base arterial injuries were enrolled in our hospital from Oct 2004 to May 2007, including 44 male and 9 female cases with average age of 23.3 years. Thirty-nine cases presented with pulsatile exophthalmos and intracranial vascular murmur, cerchnus and dysphagia in another 9, epistaxis in the remaining 5 cases. Diagnosis of 39 carotid cavernous fistulae (CCF)and 14 carotid pseudoaneurysm were performed by angiography (DSA). Alternative endovascular procedures were performed depending on lesions characteristics and follow-up was done by telephone and outpatient work up. Results: Procedures were performed involving 56 carotid arteries in all 53 cases including 34 CCF with embolization of detachable balloon(33 cases), 3 with balloon and coils, and 3 by stent-graft placement. 8 carotid pseudoaneurysms were cured by parent artery occlusion with balloon, 2 experienced endovascular isolation with balloon and coils, and 4 with stent-graft. Follow-up for mean 9.5 months (range from 2 to 25 months) revealed that the chief symptoms of 45 cases (85%) were relieved within 6 months after the procedure but ocular movement and visual disorder remained in 8 cases (15%)till 12 months. Six pseudoaneurysms and 3 residual leak were found in reexamination, of which 2 cases underwent intervention again 2 and 3 months later due to dural arterial-venous fistula in cavernous sinus, respectively. Conclusions: Endovascular treatment is safe and effective therapeutic option with minimal invasion for skull base arterial injuries. Detachable balloon embolization is the first choice for CCF and carotid pseudoaneurysm. Spring coil packing and stent-graft implantation should be in alternation as combination for special cases. (authors)

[Application of neuroendoscope in the treatment of skull base chordoma].

Science.gov (United States)

Zhang, Ya-Zhuo; Wang, Zong-Cheng; Zong, Xu-Yi; Wang, Xin-Sheng; Gui, Song-Bai; Zhao, Peng; Li, Chu-Zhong; He, Yue; Wang, Hong-Yun

2011-07-05

To further explore the application, approach, indication and prognosis of neuroendoscope treatment for skull base chordoma. A total of 101 patients of skull base chordoma were admitted at our hospital from May 2000 to April 2010. There were 59 males and 42 females. Their major clinical manifestations included headache, cranial nerve damage and dyspnea. They were classified according to the patterns of tumor growth: Type I (n = 13): tumor location at a single component of skull base, i. e. clivus or sphenoid sinus with intact cranial dura; Type II (n = 56): tumor involving more than two components of skull e. g clivus, sphenoid and nasal/oral cavity, etc. But there was no intracranial invasion; Type III (n = 32) : tumor extending widely and intradurally forming compression of brain stems and multiple cranial nerves. Based on the types of chordoma, different endoscopic approaches were employed, viz. transnasal, transoral, trans-subtemporal fossa and plus microsurgical craniotomy for staging in some complex cases. Among all patients, total resection was achieved (n = 19), subtotal (n = 58) and partial (n = 24). In partial resection cases, 16 cases were considered to be subtotal due to a second-stage operation. Most cases had conspicuous clinical improvements. Self-care recovery within one week post-operation accounted for 58.4%, two weeks 30.7%, one month 6.9% and more than one month 1.9%. Postoperative complications occurred in 13 cases (12.8%) and included CSF leakage (n = 4) cranial nerve palsy (n = 5), hemorrhagic nasal wounds (n = 3) and delayed intracranial hemorrhage (n = 1). All of these were cured or improved after an appropriate treatment. A follow-up of 6 - 60 months was conducted in 56 cases. Early detection and early treatment are crucial for achieving a better outcome in chordoma. Neuroendoscopic treatment plays an important role in managing those complicated cases. Precise endoscopic techniques plus different surgical approaches and staging procedures

Permeability and 3-D melt geometry in shear-induced high melt fraction conduits

Science.gov (United States)

Zhu, W.; Cordonnier, B.; Qi, C.; Kohlstedt, D. L.

2017-12-01

Observations of dunite channels in ophiolites and uranium-series disequilibria in mid-ocean ridge basalt suggest that melt transport in the upper mantle beneath mid-ocean ridges is strongly channelized. Formation of high melt fraction conduits could result from mechanical shear, pyroxene dissolution, and lithological partitioning. Deformation experiments (e.g. Holtzman et al., 2003) demonstrate that shear stress causes initially homogeneously distributed melt to segregate into an array of melt-rich bands, flanked by melt-depleted regions. At the same average melt fraction, the permeability of high melt fraction conduits could be orders of magnitude higher than that of their homogenous counterparts. However, it is difficult to determine the permeability of melt-rich bands. Using X-ray synchrotron microtomography, we obtained high-resolution images of 3-dimensional (3-D) melt distribution in a partially molten rock containing shear-induced high melt fraction conduits. Sample CQ0705, an olivine-alkali basalt aggregate with a nominal melt fraction of 4%, was deformed in torsion at a temperature of 1473 K and a confining pressure of 300 MPa to a shear strain of 13.3. A sub-volume of CQ0705 encompassing 3-4 melt-rich bands was imaged. Microtomography data were reduced to binary form so that solid olivine is distinguishable from basalt glass. At a spatial resolution of 160 nm, the 3-D images reveal the shape and connectedness of melt pockets in the melt-rich bands. Thin melt channels formed at grain edges are connected at large melt nodes at grain corners. Initial data analysis shows a clear preferred orientation of melt pockets alignment subparallel to the melt-rich band. We use the experimentally determined geometrical parameters of melt topology to create a digital rock with identical 3-D microstructures. Stokes flow simulations are conducted on the digital rock to obtain the permeability tensor. Using this digital rock physics approach, we determine how deformation

Chemical decontamination and melt densification of chop-leach fuel hulls

International Nuclear Information System (INIS)

Dillon, R.L.; Griggs, B.; Kemper, R.S.; Nelson, R.G.

1976-01-01

This paper reports on decontamination and densification studies of chop-leach fuel hull residues designed to minimize the transuranic element (TRU) contaminated waste stream. Decontamination requirements have been established from studies of TRU element distribution in the fuel hull residues. Effective surface decontamination of Zircaloy requires removal of zirconium oxide corrosion products. Good decontamination factors have been achieved with aqueous solutions following high temperature HF conditioning of oxide films. Molten fluoride salt mixtures are effective decontaminants, but pose problems in metal loss and salt dragout. Molten metal decontamination methods are highly preliminary, but may be required to reduce TRU originating from tramp uranium in Zircaloy. Low melting (1300 0 C) alloy of Zircaloy, stainless steel, and Inconel have been prepared in induction heated graphite crucibles. High quality ingots of Zircaloy-2 have been prepared directly from short sections of descaled fuel clad tubing using the Inductoslag process. This material is readily capable of refabrication. Inductoslag melts have also been prepared from heavily oxidized Zircaloy tubing demonstrating melt densification without prior decontamination is technically feasible. Hydrogen absorption kinetics have been demonstrated with cast Zircaloy-2 and cast Zircaloy-stainless steel-Inconel alloys. Metallic fuel hull residues have been proposed as a storage medium for tritium released from fuel during reprocessing. (author)

Skull-base Osteomyelitis: a Dreaded Complication after Trivial Fall and Inadequate Management

Directory of Open Access Journals (Sweden)

Kundan Mittal

2015-10-01

Full Text Available Introduction: Skull-based osteomyelitis is bony infection which generally originates from inadequately treated chronic infection, adjoining tissue infection or after trauma.Case: 11 month female child had a trivial fall while standing near a bucket. The child developed fracture of right clavicle and left orbital swelling which was inadequately treated. This resulted in in spread of infection to adjoining tissues, skull bones, sinuses and brain.Conclusion: Cranial base osteomyelitis is rare but dreaded condition which requires early diagnosis and prompt treatment to avoid mortality and morbidity in form of neurological deficits and permanent disability

A complete skull of an early cretaceous sauropod and the evolution of advanced titanosaurians.

Directory of Open Access Journals (Sweden)

Hussam Zaher

Full Text Available Advanced titanosaurian sauropods, such as nemegtosaurids and saltasaurids, were diverse and one of the most important groups of herbivores in the terrestrial biotas of the Late Cretaceous. However, little is known about their rise and diversification prior to the Late Cretaceous. Furthermore, the evolution of their highly-modified skull anatomy has been largely hindered by the scarcity of well-preserved cranial remains. A new sauropod dinosaur from the Early Cretaceous of Brazil represents the earliest advanced titanosaurian known to date, demonstrating that the initial diversification of advanced titanosaurians was well under way at least 30 million years before their known radiation in the latest Cretaceous. The new taxon also preserves the most complete skull among titanosaurians, further revealing that their low and elongated diplodocid-like skull morphology appeared much earlier than previously thought.

FGF/FGFR Signaling Coordinates Skull Development by Modulating Magnitude of Morphological Integration: Evidence from Apert Syndrome Mouse Models

Science.gov (United States)

Martínez-Abadías, Neus; Heuzé, Yann; Wang, Yingli; Jabs, Ethylin Wang; Aldridge, Kristina; Richtsmeier, Joan T.

2011-01-01

The fibroblast growth factor and receptor system (FGF/FGFR) mediates cell communication and pattern formation in many tissue types (e.g., osseous, nervous, vascular). In those craniosynostosis syndromes caused by FGFR1-3 mutations, alteration of signaling in the FGF/FGFR system leads to dysmorphology of the skull, brain and limbs, among other organs. Since this molecular pathway is widely expressed throughout head development, we explore whether and how two specific mutations on Fgfr2 causing Apert syndrome in humans affect the pattern and level of integration between the facial skeleton and the neurocranium using inbred Apert syndrome mouse models Fgfr2+/S252W and Fgfr2+/P253R and their non-mutant littermates at P0. Skull morphological integration (MI), which can reflect developmental interactions among traits by measuring the intensity of statistical associations among them, was assessed using data from microCT images of the skull of Apert syndrome mouse models and 3D geometric morphometric methods. Our results show that mutant Apert syndrome mice share the general pattern of MI with their non-mutant littermates, but the magnitude of integration between and within the facial skeleton and the neurocranium is increased, especially in Fgfr2+/S252W mice. This indicates that although Fgfr2 mutations do not disrupt skull MI, FGF/FGFR signaling is a covariance-generating process in skull development that acts as a global factor modulating the intensity of MI. As this pathway evolved early in vertebrate evolution, it may have played a significant role in establishing the patterns of skull MI and coordinating proper skull development. PMID:22053191

FGF/FGFR signaling coordinates skull development by modulating magnitude of morphological integration: evidence from Apert syndrome mouse models.

Directory of Open Access Journals (Sweden)

Neus Martínez-Abadías

Full Text Available The fibroblast growth factor and receptor system (FGF/FGFR mediates cell communication and pattern formation in many tissue types (e.g., osseous, nervous, vascular. In those craniosynostosis syndromes caused by FGFR1-3 mutations, alteration of signaling in the FGF/FGFR system leads to dysmorphology of the skull, brain and limbs, among other organs. Since this molecular pathway is widely expressed throughout head development, we explore whether and how two specific mutations on Fgfr2 causing Apert syndrome in humans affect the pattern and level of integration between the facial skeleton and the neurocranium using inbred Apert syndrome mouse models Fgfr2(+/S252W and Fgfr2(+/P253R and their non-mutant littermates at P0. Skull morphological integration (MI, which can reflect developmental interactions among traits by measuring the intensity of statistical associations among them, was assessed using data from microCT images of the skull of Apert syndrome mouse models and 3D geometric morphometric methods. Our results show that mutant Apert syndrome mice share the general pattern of MI with their non-mutant littermates, but the magnitude of integration between and within the facial skeleton and the neurocranium is increased, especially in Fgfr2(+/S252W mice. This indicates that although Fgfr2 mutations do not disrupt skull MI, FGF/FGFR signaling is a covariance-generating process in skull development that acts as a global factor modulating the intensity of MI. As this pathway evolved early in vertebrate evolution, it may have played a significant role in establishing the patterns of skull MI and coordinating proper skull development.

Repair of large frontal temporal parietal skull defect with digitally reconstructed titanium mesh: a report of 20 cases

Directory of Open Access Journals (Sweden)

Gang-ge CHENG

2013-09-01

Full Text Available Objective　To explore the clinical effect and surgical technique of the repair of large defect involving frontal, temporal, and parietal regions using digitally reconstructed titanium mesh. Methods　Twenty patients with large frontal, temporal, and parietal skull defect hospitalized in Air Force General Hospital from November 2006 to May 2012 were involved in this study. In these 20 patients, there were 13 males and 7 females, aged 18-58 years (mean 39 years, and the defect size measured from 7.0cm×9.0cm to 11.5cm×14.0cm (mean 8.5cm×12.0cm. Spiral CT head scan and digital three-dimensional reconstruction of skull were performed in all the patients. The shape and geometric size of skull defect was traced based on the symmetry principle, and then the data were transferred into digital precision lathe to reconstruct a titanium mesh slightly larger (1.0-1.5cm than the skull defect, and the finally the prosthesis was perfected after pruning the border. Cranioplasty was performed 6-12 months after craniotomy using the digitally reconstructed titanium mesh. Results　The digitally reconstructed titanium mesh was used in 20 patients with large frontal, temporal, parietal skull defect. The surgical technique was relatively simple, and the surgical duration was shorter than before. The titanium mesh fit to the defect of skull accurately with satisfactory molding effect, good appearance and symmetrical in shape. No related complication was found in all the patients. Conclusion　Repair of large frontal, temporal, parietal skull defect with digitally reconstructed titanium mesh is more advantageous than traditional manual reconstruction, and it can improve the life quality of patients.

Neonatal skull depression unassociated with birth trauma

International Nuclear Information System (INIS)

Eisenberg, D.; Kirchner, S.G.; Perrin, E.C.

1984-01-01

With few exceptions, a depression of the calvaria in a neonate is caused by birth trauma and often is associated with fracture. Localized depression of the skull without trauma is rare, and such a case is reported here. The cause, complications, and treatment of this condition are briefly discussed. Computed tomography (CT) was useful in clinical management. Although sizable, the depression was not associated with neurologic features and disappeared spontaneously

Subcranial approach in the surgical treatment of anterior skull base trauma.

Science.gov (United States)

Schaller, B

2005-04-01

Fractures of the anterior skull base, because of the region's anatomical relationships, are readily complicated by neurological damage to the brain or cranial nerves. This review highlights the use of a subcranial approach in the operative treatment of injuries of the anterior skull base and compares it to the more traditional neurosurgical transcranial approach. The extended anterior subcranial approach takes advantage of the specific features of injuries in this region and allows direct access to the central anterior cranial base in order to repair fractures, close CSF fistulae and relieve of optic nerve compression. It avoids extensive frontal lobe manipulation. The success of the approach in achieving the aims of surgery with low morbidity is reviewed.

Natural history of chondroid skull base lesions - case report and review

International Nuclear Information System (INIS)

Schmidinger, A.; Rosahl, S.K.; Vorkapic, P.; Samii, M.

2002-01-01

Long-term follow-up reports on chondroid lesions of the skull base are rarely presented in the literature. There are virtually no data on natural growth rates of these tumors based on MRI obtained over a period of 10 years or longer. We followed a patient who has had such a lesion for more than 12 years. A non-progressive, slight abducens palsy has been the only associated symptom so far. Even though the patient was operated on for an additional intracranial arterio-venous malformation, clinical features and chromosomal testing excluded Maffucci's syndrome. The MRI follow-up in this case provides an extraordinary perspective on the natural history of chondroid skull base tumors. (orig.)

Resolution of "salt and pepper" appearance of the skull with vitamin D therapy

Directory of Open Access Journals (Sweden)

Gursimran Kaur

2013-01-01

Full Text Available Chronic hypovitaminosis D leads to state of decreased mineralization and generalized osteomalacia. It also results in secondary hyperparathyroidism causing increased bone turn over and decreased bone mass, manifested radiologically as a "salt and pepper" appearance in skull, subperiosteal resorption, bone cysts and lytic lesions. In this case, a young male patient with hypovitaminosis D and secondary hyperparathyroidism, radiological features show resolution of "salt and pepper" appearance of the skull with vitamin D in 11 months and regression of other lytic lesions.

Panorama of Reconstruction of Skull Base Defects: From Traditional Open to Endonasal Endoscopic Approaches, from Free Grafts to Microvascular Flaps

Science.gov (United States)

Reyes, Camilo; Mason, Eric; Solares, C. Arturo

2014-01-01

Introduction A substantial body of literature has been devoted to the distinct characteristics and surgical options to repair the skull base. However, the skull base is an anatomically challenging location that requires a three-dimensional reconstruction approach. Furthermore, advances in endoscopic skull base surgery encompass a wide range of surgical pathology, from benign tumors to sinonasal cancer. This has resulted in the creation of wide defects that yield a new challenge in skull base reconstruction. Progress in technology and imaging has made this approach an internationally accepted method to repair these defects. Objectives Discuss historical developments and flaps available for skull base reconstruction. Data Synthesis Free grafts in skull base reconstruction are a viable option in small defects and low-flow leaks. Vascularized flaps pose a distinct advantage in large defects and high-flow leaks. When open techniques are used, free flap reconstruction techniques are often necessary to repair large entry wound defects. Conclusions Reconstruction of skull base defects requires a thorough knowledge of surgical anatomy, disease, and patient risk factors associated with high-flow cerebrospinal fluid leaks. Various reconstruction techniques are available, from free tissue grafting to vascularized flaps. Possible complications that can befall after these procedures need to be considered. Although endonasal techniques are being used with increasing frequency, open techniques are still necessary in selected cases. PMID:25992142

Computed tomography in neoplastic diseases of the skull base and adjacent areas using EMI scanner CT-1000

International Nuclear Information System (INIS)

Ono, Yoshimi; Ohtake, Eiji; Asakura, Koichi; Tanohata, Kazunori; Ito, Otomasa

1980-01-01

CT-findings of 145 patients with and without neoplastic diseases of the skull base were evaluated using EMI CT-1000. Analysis of 64 patients without any lesion at the skull base showed more artifacts compared with that of higher slices, so that good or fair images were obtained only in 64% of this groups of patients. The most important factor in producing artifacts are considered to be caused by patient's movement. We also evaluated the tumor extension to the skull base in 81 patients. They were 24 brain tumors, 21 pituitary adenomas, and 36 nasopharyngeal and paranasal cancers. Four out of 24 brain tumors showed extracranial extension, 12 pituitary adenomas infiltrating outside of the sella turcica, and 10 cases of nasopharyngeal cancers showed intracranial extension. It was concluded that CT presented an excellent information in evaluating the degree of extension of neoplasms which invading to the skull base. (author)

Powder processing and spheroidizing with thermal inductively coupled plasma

International Nuclear Information System (INIS)

Nutsch, G.; Linke, P.; Zakharian, S.; Dzur, B.; Weiss, K.-H.

2001-01-01

Processing of advanced powder materials for the spraying industry is one of the most promising applications of the thermal RF inductively coupled plasma. By selecting the feedstock carefully and adjusting the RF plasma parameters, unique materials with high quality can be achieved. Powders injected in the hot plasma core emerge with modified shapes, morphology, crystal structure and chemical composition. Ceramic oxide powders such as Al 2 O 3 , ZrO 2 , SiO 2 are spheroidized with a high spheroidization rate. By using the RF induction plasma spheroidizing process tungsten melt carbide powders are obtained with a high spheroidization rate at high feeding rates by densification of agglomerated powders consisting of di-tungsten carbide and monocarbide with a definite composition. This kind of ball-like powders is particularly suited for wear resistant applications. (author)

Neurotization of oculomotor, trochlear and abducent nerves in skull base surgery

Institute of Scientific and Technical Information of China (English)

李世亭; 潘庆刚; 刘宁涛; 刘忠; 沈峰

2003-01-01

Objective To anatomically reconstruct the oculomotor nerve, trochlear nerve, and abducent nerve by skull base surgery. Methods Seventeen cranial nerves (three oculomotor nerves, eight trochlear nerves and six abducent nerves) were injured and anatomically reconstructed in thirteen skull base operations during a period from 1994 to 2000. Repair techniques included end-to-end neurosuture or fibrin glue adhesion, graft neurosuture or fibrin glue adhesion. The relationships between repair techniques and functional recovery and the related factors were analyzed.Results Functional recovery began from 3 to 8 months after surgery. During a follow-up period of 4 months to 6 years, complete recovery of function was observed in 6 trochlear nerves (75%) and 4 abducent nerves (67%), while partial functional recovery was observed in the other cranial nerves including 2 trochlear nerves, 2 abducent nerves, and 3 oculomotor nerves.Conclusions Complete or partial functional recovery could be expected after anatomical neurotization of an injured oculomotor, trochlear or abducent nerve. Our study demonstrated that, in terms of functional recovery, trochlear and abducent nerves are more responsive than oculomotor nerves, and that end-to-end reconstruction is more efficient than graft reconstruction. These results encourage us to perform reconstruction for a separated cranial nerve as often as possible during skull base surgery.

In the Eye of the Beholder: Owner Preferences for Variations in Cats’ Appearances with Specific Focus on Skull Morphology

Science.gov (United States)

Packer, Rowena M. A.; Sordo, Lorena; Chen, Ruoning; Caney, Sarah M. A.

2018-01-01

Simple Summary Recently, there has been an increase in popularity of cats with different skull shapes, including shortened or lengthened muzzles. Skull shape, like other physical features, may affect human preferences; however, it is also more likely to have an impact on the welfare of the cat. We asked people to score their preference for 15 pictures of cats across two surveys. Extreme face shapes (those that were very short or very long) were least preferred. Short-faced cats were less popular amongst cat owners from animal related jobs as opposed to other people. Respondents that had a short or long-faced cat preferred cats with the same skull shape, but also had lower preferences for the opposite skull shape. Respondents from Asia, as compared to those from elsewhere, gave higher preference scores to both long and short-faced cats. Amongst the other features, green eyes, a ginger coat color and medium length coat were most preferred, although the ability to draw conclusions around these features is limited, given they are not necessarily independent of skull shape. This study provides the first evidence that preferences for cat breeds, and their associated skull morphologies, are driven by both culture and owner experience. This information may inform future research concerning the preferences of cat owners. Abstract Changes in the popularity of cat breeds are largely driven by human perceptions of, and selection for, phenotypic traits including skull morphology. The popularity of breeds with altered skull shapes appears to be increasing, and owner preferences are an important part of this dynamic. This study sought to establish how and why a range of phenotypic attributes, including skull shape, affect preferences shown by cat owners. Two questionnaires were distributed on-line to cat owners who were asked to rate preferences for pictures of cats on a 0–10 scale. Veterinarian consensus established the skull types of the cats pictured (i.e., level of

Influence of thickening of the inner skull table on intracranial volume measurement in older people.

Science.gov (United States)

Royle, N A; Hernández, M C Valdés; Maniega, S Muñoz; Arabisala, B S; Bastin, M E; Deary, I J; Wardlaw, J M

2013-07-01

It is generally assumed that intracranial volume (ICV) remains constant after peaking in early adulthood. Thus ICV is used as a 'proxy' for original brain size when trying to estimate brain atrophy in older people in neuroimaging studies. However, physiological changes in the skull, such as thickening of the frontal inner table, are relatively common in older age and will reduce ICV. The potential influence that inner table skull thickening may have on ICV measurement in old age has yet to be investigated. We selected 60 (31 males, 29 females) representative older adults aged 71.1-74.3years from a community-dwelling ageing cohort, the Lothian Birth Cohort 1936. A semi-automatically derived current ICV measurement obtained from high resolution T1-weighted volume scans was compared to the estimated original ICV by excluding inner skull table thickening using expert manual image processing. Inner table skull thickening reduced ICV from an estimated original 1480.0ml to a current 1409.1ml, a median decrease of 7.3% (Z=-6.334; pestimated original ICV is required for research into brain ageing. Copyright © 2013 Elsevier Inc. All rights reserved.

Robust skull stripping using multiple MR image contrasts insensitive to pathology.

Science.gov (United States)

Roy, Snehashis; Butman, John A; Pham, Dzung L

2017-02-01

Automatic skull-stripping or brain extraction of magnetic resonance (MR) images is often a fundamental step in many neuroimage processing pipelines. The accuracy of subsequent image processing relies on the accuracy of the skull-stripping. Although many automated stripping methods have been proposed in the past, it is still an active area of research particularly in the context of brain pathology. Most stripping methods are validated on T 1 -w MR images of normal brains, especially because high resolution T 1 -w sequences are widely acquired and ground truth manual brain mask segmentations are publicly available for normal brains. However, different MR acquisition protocols can provide complementary information about the brain tissues, which can be exploited for better distinction between brain, cerebrospinal fluid, and unwanted tissues such as skull, dura, marrow, or fat. This is especially true in the presence of pathology, where hemorrhages or other types of lesions can have similar intensities as skull in a T 1 -w image. In this paper, we propose a sparse patch based Multi-cONtrast brain STRipping method (MONSTR), 2 where non-local patch information from one or more atlases, which contain multiple MR sequences and reference delineations of brain masks, are combined to generate a target brain mask. We compared MONSTR with four state-of-the-art, publicly available methods: BEaST, SPECTRE, ROBEX, and OptiBET. We evaluated the performance of these methods on 6 datasets consisting of both healthy subjects and patients with various pathologies. Three datasets (ADNI, MRBrainS, NAMIC) are publicly available, consisting of 44 healthy volunteers and 10 patients with schizophrenia. Other three in-house datasets, comprising 87 subjects in total, consisted of patients with mild to severe traumatic brain injury, brain tumors, and various movement disorders. A combination of T 1 -w, T 2 -w were used to skull-strip these datasets. We show significant improvement in stripping

Cases of Trephination in Ancient Greek Skulls

Directory of Open Access Journals (Sweden)

Vasiliki Ζafiri

2012-01-01

Full Text Available Background: Trephination, or trepanning, is considered to be one of the most ancient surgical operations with an especially extensive geographical incidence, both in the New World and in the Old. In Europe, more than 200 finds of trephination have been found, from Scandinavia to the Balkans. The technique of trephination or trepanning covers overall the last 10,000 years and exhibits great versatility and adjustability in the knowledge, technical means, therapeutic needs, prejudices and social standards of each period and of each population group. Hippocrates was the one to classify for the first time the kinds of cranial fractures and define the conditions and circumstances for carrying out a trepanning.Aim: The present research aims to investigate the Greek cranial trephinations on sculls from the collection of the Anthropological Museum of the Medical School of Athens that come from archaeological excavations.Method: Skulls were examined by macroscopic observation with reflective light. Furthermore, radiographic representation of the skulls was used.Results: The anthropological researches and the studies of anthropological skeleton remains that came out during archaeological excavations from different eras and areas have given information about the medical practices in the very important geographic area of Greece and in particular, we referred to cases of Greek trephinations.

Potential effect of skull thickening on the associations between cognition and brain atrophy in ageing.

Science.gov (United States)

Aribisala, Benjamin Segun; Royle, Natalie A; Valdés Hernández, Maria C; Murray, Catherine; Penke, Lars; Gow, Alan; Maniega, Susana Muñoz; Starr, John M; Bastin, Mark; Deary, Ian; Wardlaw, Joanna

2014-09-01

intracranial volume (ICV) is commonly used as a marker of premorbid brain size in neuroimaging studies as it is thought to remain fixed throughout adulthood. However, inner skull table thickening would encroach on ICV and could mask actual brain atrophy. we investigated the effect that thickening might have on the associations between brain atrophy and cognition. the sample comprised 57 non-demented older adults who underwent structural brain MRI at mean age 72.7 ± 0.7 years and were assessed on cognitive ability at mean age 11 and 73 years. Principal component analysis was used to derive factors of general cognitive ability (g), information processing speed and memory from the recorded cognitive ability data. The total brain tissue volume and ICV with (estimated original ICV) and without (current ICV) adjusting for the effects of inner table skull thickening were measured. General linear modelling was used to test for associations. all cognitive ability variables were significantly (P skull thickening (g: η(2) = 0.177, speed: η(2) = 0.264 and memory: η(2) = 0.132). After accounting for skull thickening, only speed was significantly associated with percentage total brain volume in ICV (η(2) = 0.085, P = 0.034), not g or memory. not accounting for skull thickening when computing ICV can distort the association between brain atrophy and cognitive ability in old age. Larger samples are required to determine the true effect. © The Author 2014. Published by Oxford University Press on behalf of the British Geriatrics Society. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

X-ray screening of the artificially deformed skulls from the Middle Bronze Age of the Low Volga region (paleopathology aspect

Directory of Open Access Journals (Sweden)

Pererva Evgenii Vladimirovich

2013-11-01

Full Text Available The impact of the deforming structure on the human skull is one of the most challenging and debated questions in modern archeology and anthropology related to artificial deformation of the skull. This is precisely why the present study attempts to study the pathological artificially deformed skulls of representatives of the Catacomb culture originating from burial mound in the Lower Volga region. The analysis of the bone material was carried out with the use of X-ray method of the frontal and lateral views. Thirteen radiographs of skulls with traces of deliberate artificial deformation were examined. The skull shapes, structure of the skull calvarial bones, state of the cranial sutures, signs of intracranial hypertension, and symptoms of vascular and endocrine pathologies were explored and evaluated. The study discovered that Catacomb culture bearers used a variety of methods of skull deformation. Front occipital, occipital ring strain and conventional acrocephaly deformation modes were revealed. The viability and compatibility with normal human activity of artificial skull deformation was observed. In the childhood and newborn periods, individuals have applied constrictive and restrictive devices, trusses andother appliancesfor a few years, their impact couldresultin the intracranial hypertension syndrome, as well as in problems with cranial sutures obliteration. It is very much likely that the use of strain could stimulate the development of the internal frontal hyperostosis (Morgagni's disease which contributed to the emergence of endocrine abnormities in humans. The increased trauma rate of skeleton bones was observed in population of the Middle Bronze Age, as well as ear diseases which makes us once again address the issue of social and cultural phenomenon of intentional artificial deformation of the head tradition.

The Role of Skull Modeling in EEG Source Imaging for Patients with Refractory Temporal Lobe Epilepsy.

Science.gov (United States)

Montes-Restrepo, Victoria; Carrette, Evelien; Strobbe, Gregor; Gadeyne, Stefanie; Vandenberghe, Stefaan; Boon, Paul; Vonck, Kristl; Mierlo, Pieter van

2016-07-01

We investigated the influence of different skull modeling approaches on EEG source imaging (ESI), using data of six patients with refractory temporal lobe epilepsy who later underwent successful epilepsy surgery. Four realistic head models with different skull compartments, based on finite difference methods, were constructed for each patient: (i) Three models had skulls with compact and spongy bone compartments as well as air-filled cavities, segmented from either computed tomography (CT), magnetic resonance imaging (MRI) or a CT-template and (ii) one model included a MRI-based skull with a single compact bone compartment. In all patients we performed ESI of single and averaged spikes marked in the clinical 27-channel EEG by the epileptologist. To analyze at which time point the dipole estimations were closer to the resected zone, ESI was performed at two time instants: the half-rising phase and peak of the spike. The estimated sources for each model were validated against the resected area, as indicated by the postoperative MRI. Our results showed that single spike analysis was highly influenced by the signal-to-noise ratio (SNR), yielding estimations with smaller distances to the resected volume at the peak of the spike. Although averaging reduced the SNR effects, it did not always result in dipole estimations lying closer to the resection. The proposed skull modeling approaches did not lead to significant differences in the localization of the irritative zone from clinical EEG data with low spatial sampling density. Furthermore, we showed that a simple skull model (MRI-based) resulted in similar accuracy in dipole estimation compared to more complex head models (based on CT- or CT-template). Therefore, all the considered head models can be used in the presurgical evaluation of patients with temporal lobe epilepsy to localize the irritative zone from low-density clinical EEG recordings.

Aplasia cutis congenita, skull defect, brain heterotopia, and intestinal lymphangiectasia

NARCIS (Netherlands)

Bonioli, Eugenio; Hennekam, Raoul C.; Spena, Gianantonio; Morcaldi, Guido; Di Stefano, Antonio; Serra, Giovanni; Bellini, Carlo

2005-01-01

We describe a female infant with a previously unreported combination of manifestations characterized by aplasia cutis, skull defect, brain heterotopia, mild congenital lymphedema, and intestinal lymphangiectasia. The association of intestinal lymphangiectasia and aplasia cutis, and the association

Eosinophilic granuloma of the skull base: patient with unique clinical moreover, radiographic presentation.

Directory of Open Access Journals (Sweden)

Hosein Dalili

2015-01-01

Full Text Available This case report presents an eight-year-old girl having periauricular swelling and severe pain during mouth opening on the right-side temporomandibular joint (TMJ. CBCT showed extensive destruction of the base of the skull and the roof of the glenoid fossa on the right side. The findings based on CT and MRI images with and without contrast are discussed herein. This report highlights a skull base eosinophilic granuloma that mimics TMJ disorder and the importance of proper evaluation of CBCT images to make an early diagnosis.

The manufacturing of TiAl6V4 implants using selective laser melting technology

Science.gov (United States)

Lykov, P. A.; Baitimerov, R. M.; Panfilov, A. V.; Guz, A. O.

2017-10-01

In this article we study the technique for creating medical implants using additive technologies. A plastic skull model was made. The affected part of the skull was identified and removed. An implant was made of titanium alloy. The implant was installed in the model skull.

Primary Ewing's sarcoma of the skull: radical resection and immediate cranioplasty after chemotherapy. A technical note.

Science.gov (United States)

Castle, Maria; Rivero, Mónica; Marquez, Javier

2013-02-01

The current standard treatment of Ewing's sarcoma is chemotherapy followed by surgery, making an immediate cranial reconstruction in a one-step surgical procedure possible. We describe the technique used to repair a cranial defect after the resection of a primary Ewing's sarcoma of the skull in a one-step surgical procedure. Bone repair with a custom-made cranioplasty immediately after resection of a primary Ewing's sarcoma of the skull avoids deformities and late complications associated with reconstructive surgery after radiotherapy and not interfere with radiotherapy and neither with follow-up. A one-step surgical procedure after chemotherapy for primary Ewing's sarcoma of the skull could be safer, less aggressive and more radical; avoiding deformities and late complications.

Transcranial passive acoustic mapping with hemispherical sparse arrays using CT-based skull-specific aberration corrections: a simulation study

International Nuclear Information System (INIS)

Jones, Ryan M; O’Reilly, Meaghan A; Hynynen, Kullervo

2013-01-01

The feasibility of transcranial passive acoustic mapping with hemispherical sparse arrays (30 cm diameter, 16 to 1372 elements, 2.48 mm receiver diameter) using CT-based aberration corrections was investigated via numerical simulations. A multi-layered ray acoustic transcranial ultrasound propagation model based on CT-derived skull morphology was developed. By incorporating skull-specific aberration corrections into a conventional passive beamforming algorithm (Norton and Won 2000 IEEE Trans. Geosci. Remote Sens. 38 1337–43), simulated acoustic source fields representing the emissions from acoustically-stimulated microbubbles were spatially mapped through three digitized human skulls, with the transskull reconstructions closely matching the water-path control images. Image quality was quantified based on main lobe beamwidths, peak sidelobe ratio, and image signal-to-noise ratio. The effects on the resulting image quality of the source’s emission frequency and location within the skull cavity, the array sparsity and element configuration, the receiver element sensitivity, and the specific skull morphology were all investigated. The system’s resolution capabilities were also estimated for various degrees of array sparsity. Passive imaging of acoustic sources through an intact skull was shown possible with sparse hemispherical imaging arrays. This technique may be useful for the monitoring and control of transcranial focused ultrasound (FUS) treatments, particularly non-thermal, cavitation-mediated applications such as FUS-induced blood–brain barrier disruption or sonothrombolysis, for which no real-time monitoring techniques currently exist. (paper)

Transcranial passive acoustic mapping with hemispherical sparse arrays using CT-based skull-specific aberration corrections: a simulation study

Science.gov (United States)

Jones, Ryan M.; O’Reilly, Meaghan A.; Hynynen, Kullervo

2013-01-01

The feasibility of transcranial passive acoustic mapping with hemispherical sparse arrays (30 cm diameter, 16 to 1372 elements, 2.48 mm receiver diameter) using CT-based aberration corrections was investigated via numerical simulations. A multi-layered ray acoustic transcranial ultrasound propagation model based on CT-derived skull morphology was developed. By incorporating skull-specific aberration corrections into a conventional passive beamforming algorithm (Norton and Won 2000 IEEE Trans. Geosci. Remote Sens. 38 1337–43), simulated acoustic source fields representing the emissions from acoustically-stimulated microbubbles were spatially mapped through three digitized human skulls, with the transskull reconstructions closely matching the water-path control images. Image quality was quantified based on main lobe beamwidths, peak sidelobe ratio, and image signal-to-noise ratio. The effects on the resulting image quality of the source’s emission frequency and location within the skull cavity, the array sparsity and element configuration, the receiver element sensitivity, and the specific skull morphology were all investigated. The system’s resolution capabilities were also estimated for various degrees of array sparsity. Passive imaging of acoustic sources through an intact skull was shown possible with sparse hemispherical imaging arrays. This technique may be useful for the monitoring and control of transcranial focused ultrasound (FUS) treatments, particularly non-thermal, cavitation-mediated applications such as FUS-induced blood-brain barrier disruption or sonothrombolysis, for which no real-time monitoring technique currently exists. PMID:23807573

Anatomic study of the pterion in Nigerian dry human skulls.

Science.gov (United States)

Ukoha, U; Oranusi, C K; Okafor, J I; Udemezue, O O; Anyabolu, A E; Nwamarachi, T C

2013-01-01

The pterion is a point of sutural confluence seen in the norma lateralis of the skull. The site is an important landmark in surgical approaches to the anterior and middle cranial fossa. This study was designed to determine the frequency of pterion types and anatomic positions of the pterion in dry human skulls of Nigerians in the South Eastern Zone. Specific measurements were taken on both sides of 56 Nigerian human skulls of unknown sex, obtained from the Department of Anatomy, Nnamdi Azikiwe University, Nnewi Campus, Nnewi, Nigeria. All the four types of the pterion were present, i.e. sphenoparietal, frontotemporal, stellate, and epipteric. The study showed that the sphenoparietal type was 75% on the right side, 76% on the left side, the frontotemporal type was 19.6% on both sides, the stellate type was 1.8% on the right side and absent on the left side. The epipteric type was 3.6% on both sides. The distances from the centre of pterion to the frontozygomatic suture were 2.74 ± 0.07 cm on the right side and 2.74 ± 0.06 cm on the left side. The pterion was 4.02 ± 0.05 and 4.01 ± 0.03 cm above the midpoint of the zygomatic arch on the right and left sides, respectively. These findings are important for the surgeon as the pterion junction is a common extracranial landmark in neurosurgical and surgical approaches.

Descriptive anatomy and three-dimensional reconstruction of the skull of the early tetrapod Acanthostega gunnari Jarvik, 1952.

Science.gov (United States)

Porro, Laura B; Rayfield, Emily J; Clack, Jennifer A

2015-01-01

The early tetrapod Acanthostega gunnari is an iconic fossil taxon exhibiting skeletal morphology reflecting the transition of vertebrates from water onto land. Computed tomography data of two Acanthostega skulls was segmented using visualization software to digitally separate bone from matrix and individual bones of the skull from each other. A revised description of cranial and lower jaw anatomy in this taxon based on CT data includes new details of sutural morphology, the previously undescribed quadrate and articular bones, and the mandibular symphysis. Sutural morphology is used to infer loading regime in the skull during feeding, and suggests Acanthostega used its anterior jaws to initially seize prey while smaller posterior teeth were used to restrain struggling prey during ingestion. Novel methods were used to repair and retrodeform the skull, resulting in a three-dimensional digital reconstruction that features a longer postorbital region and more strongly hooked anterior lower jaw than previous attempts while supporting the presence of a midline gap between the nasals and median rostrals.

Descriptive Anatomy and Three-Dimensional Reconstruction of the Skull of the Early Tetrapod Acanthostega gunnari Jarvik, 1952

Science.gov (United States)

Porro, Laura B.; Rayfield, Emily J.; Clack, Jennifer A.

2015-01-01

The early tetrapod Acanthostega gunnari is an iconic fossil taxon exhibiting skeletal morphology reflecting the transition of vertebrates from water onto land. Computed tomography data of two Acanthostega skulls was segmented using visualization software to digitally separate bone from matrix and individual bones of the skull from each other. A revised description of cranial and lower jaw anatomy in this taxon based on CT data includes new details of sutural morphology, the previously undescribed quadrate and articular bones, and the mandibular symphysis. Sutural morphology is used to infer loading regime in the skull during feeding, and suggests Acanthostega used its anterior jaws to initially seize prey while smaller posterior teeth were used to restrain struggling prey during ingestion. Novel methods were used to repair and retrodeform the skull, resulting in a three-dimensional digital reconstruction that features a longer postorbital region and more strongly hooked anterior lower jaw than previous attempts while supporting the presence of a midline gap between the nasals and median rostrals. PMID:25760343

Congenital malformations of the skull and meninges.

Science.gov (United States)

Kanev, Paul M

2007-02-01

The surgery and management of children who have congenital malformations of the skull and meninges require multidisciplinary care and long-term follow-up by multiple specialists in birth defects. The high definition of three-dimensional CT and MRI allows precise surgery planning of reconstruction and management of associated malformations. The reconstruction of meningoencephaloceles and craniosynostosis are challenging procedures that transform the child's appearance. The embryology, clinical presentation, and surgical management of these malformations are reviewed.

Magnetic resonance (MR) imaging of chordoma and chondroma in the skull base

International Nuclear Information System (INIS)

Tashiro, Takahiko; Inoue, Yuichi; Nemoto, Yutaka

1992-01-01

Differential diagnosis of chordoma and chondroma in the skull base is sometimes difficult. We retrospectively reviewed the MR images of 14 patients with skull base tumors (nine chordomas, four chondromas and one chondrosarcoma). MR imaging was performed with a 0.5 Tesla system (Picker International). Inversion recovery (IR) (2500-2100/600-500/40), T1-weighted spin echo (SE) (800-600/40), and T2-weighted SE (2500-1800/120) images were obtained. On IR images, seven of eight chordomas showed heterogeneous low signal intensity, and one chordoma and all chondromas showed markedly low signal intensity similar to that of CSF. Calcified or ossified portions of the chondromas were demonstrated as areas of moderately low intensity on IR images. Chondrosarcoma showed moderately low intensity similar to that of chordoma. T1-weighted SE images of chordoma and chondroma showed no difference in signal intensity. On T2-weighted SE images, six of nine chordomas and all chondromas showed markedly high signal intensity. Three chordomas and one chondrosarcoma showed moderately high signal intensity. In the diagnosis of skull base tumors, the IR sequence seems to be useful for differentiating chondroma from chordoma. (author)

Comparative skull analysis suggests species-specific captivity-related malformation in lions (Panthera leo).

Science.gov (United States)

Saragusty, Joseph; Shavit-Meyrav, Anat; Yamaguchi, Nobuyuki; Nadler, Rona; Bdolah-Abram, Tali; Gibeon, Laura; Hildebrandt, Thomas B; Shamir, Merav H

2014-01-01

Lion (Panthera leo) populations have dramatically decreased worldwide with a surviving population estimated at 32,000 across the African savannah. Lions have been kept in captivity for centuries and, although they reproduce well, high rates of stillbirths as well as morbidity and mortality of neonate and young lions are reported. Many of these cases are associated with bone malformations, including foramen magnum (FM) stenosis and thickened tentorium cerebelli. The precise causes of these malformations and whether they are unique to captive lions remain unclear. To test whether captivity is associated with FM stenosis, we evaluated 575 lion skulls of wild (N = 512) and captive (N = 63) origin. Tiger skulls (N = 276; 56 captive, 220 wild) were measured for comparison. While no differences were found between males and females or between subadults and adults in FM height (FMH), FMH of captive lions (17.36±3.20 mm) was significantly smaller and with greater variability when compared to that in wild lions (19.77±2.11 mm). There was no difference between wild (18.47±1.26 mm) and captive (18.56±1.64 mm) tigers in FMH. Birth origin (wild vs. captive) as a factor for FMH remained significant in lions even after controlling for age and sex. Whereas only 20/473 wild lions (4.2%) had FMH equal to or smaller than the 5th percentile of the wild population (16.60 mm), this was evident in 40.4% (23/57) of captive lion skulls. Similar comparison for tigers found no differences between the captive and wild populations. Lions with FMH equal to or smaller than the 5th percentile had wider skulls with smaller cranial volume. Cranial volume remained smaller in both male and female captive lions when controlled for skull size. These findings suggest species- and captivity-related predisposition for the pathology in lions.

Comparative skull analysis suggests species-specific captivity-related malformation in lions (Panthera leo.

Directory of Open Access Journals (Sweden)

Joseph Saragusty

Full Text Available Lion (Panthera leo populations have dramatically decreased worldwide with a surviving population estimated at 32,000 across the African savannah. Lions have been kept in captivity for centuries and, although they reproduce well, high rates of stillbirths as well as morbidity and mortality of neonate and young lions are reported. Many of these cases are associated with bone malformations, including foramen magnum (FM stenosis and thickened tentorium cerebelli. The precise causes of these malformations and whether they are unique to captive lions remain unclear. To test whether captivity is associated with FM stenosis, we evaluated 575 lion skulls of wild (N = 512 and captive (N = 63 origin. Tiger skulls (N = 276; 56 captive, 220 wild were measured for comparison. While no differences were found between males and females or between subadults and adults in FM height (FMH, FMH of captive lions (17.36±3.20 mm was significantly smaller and with greater variability when compared to that in wild lions (19.77±2.11 mm. There was no difference between wild (18.47±1.26 mm and captive (18.56±1.64 mm tigers in FMH. Birth origin (wild vs. captive as a factor for FMH remained significant in lions even after controlling for age and sex. Whereas only 20/473 wild lions (4.2% had FMH equal to or smaller than the 5th percentile of the wild population (16.60 mm, this was evident in 40.4% (23/57 of captive lion skulls. Similar comparison for tigers found no differences between the captive and wild populations. Lions with FMH equal to or smaller than the 5th percentile had wider skulls with smaller cranial volume. Cranial volume remained smaller in both male and female captive lions when controlled for skull size. These findings suggest species- and captivity-related predisposition for the pathology in lions.

Early medical skull surgery for treatment of post-traumatic osteomyelitis 5,000 years ago.

Directory of Open Access Journals (Sweden)

Pierpaolo Petrone

Full Text Available Here we describe the findings of a unique example of the early techniques adopted in neurosurgery around 5000 years ago, consisting in a double well healed skull trephination associated with a post-cranial traumatic event occurring intra vitam to a young male from the Early Chalcolithic cemetery of Pontecagnano (South Italy, ca. 4,900 - 4,500 cal BP. Morphological, X-ray and 3D-CT scan skull-cap evaluation revealed that the main orifice was produced by scraping, obtained by clockwise rotary motion of a right-handed surgeon facing the patient, while the partial trephination was carried out by using a stone point as a drilling tool. In both cases, bone regrowth is indicative of the individual's prolonged postoperative survival and his near-complete recovery. The right femur shows a poorly healed mid-shaft fracture presumably induced by a high energy injury, and a resulting chronic osteomyelitis, affecting both femurs by hematogenous spread of the infection. Our observations on the visual and radiological features of skull and femur lesions, along with evidence on the timing of experimental bone regrowth vs. healing of lower limb fractures associated to long-term bone infections now suggest that this young man underwent a double skull trephination in order to alleviate his extremely painful condition induced by chronic osteomyelitis, which is thought to have been the cause of death.

Evaluation of Melt Behavior with initial Melt Velocity under SFR Severe Accidents

Energy Technology Data Exchange (ETDEWEB)

Heo, Hyo; Bang, In Cheol [UNIST, Ulsan (Korea, Republic of); Jerng, Dong Wook [Chung-Ang Univ, Seoul (Korea, Republic of)

2015-10-15

In the current Korean sodium-cooled fast reactor (SFR) program, early dispersion of the molten metallic fuel within a subchannel is suggested as one of the inherent safety strategies for the initiating phase of hypothetical core disruptive accident (HCDA). The safety strategy provides negative reactivity driven by the melt dispersal, so it could reduce the possibility of the recriticality event under a severe triple or more fault scenario for SFR. Since the behavior of the melt dispersion is unpredictable, it depends on the accident condition, particularly core region. While the voided coolant channel region is usually developed in the inner core, the unvoided coolant channel region is formed in the outer core. It is important to confirm the fuel dispersion with the core region, but there are not sufficient existing studies for them. From the existing studies, the coolant vapor pressure is considered as one of driving force to move the melt towards outside of the core. There is a complexity of the phenomena during intermixing of the melt with the coolant after the horizontal melt injections. It is too difficult to understand the several combined mechanisms related to the melt dispersion and the fragmentation. Thus, it could be worthwhile to study the horizontal melt injections at lower temperature as a preliminary study in order to identify the melt dispersion phenomena. For this reason, it is required to clarify whether the coolant vapor pressure is the driving force of the melt dispersion with the core region. The specific conditions to be well dispersed for the molten metallic fuel were discussed in the experiments with the simulant materials. The each melt behavior was compared to evaluate the melt dispersion under the coolant void condition and the boiling condition. As the results, the following results are remarked: 1. The upward melt dispersion did not occur for a given melt and coolant temperature in the nonboiling range. Over current range of conditions

Evaluation of Melt Behavior with initial Melt Velocity under SFR Severe Accidents

International Nuclear Information System (INIS)

Heo, Hyo; Bang, In Cheol; Jerng, Dong Wook

2015-01-01

In the current Korean sodium-cooled fast reactor (SFR) program, early dispersion of the molten metallic fuel within a subchannel is suggested as one of the inherent safety strategies for the initiating phase of hypothetical core disruptive accident (HCDA). The safety strategy provides negative reactivity driven by the melt dispersal, so it could reduce the possibility of the recriticality event under a severe triple or more fault scenario for SFR. Since the behavior of the melt dispersion is unpredictable, it depends on the accident condition, particularly core region. While the voided coolant channel region is usually developed in the inner core, the unvoided coolant channel region is formed in the outer core. It is important to confirm the fuel dispersion with the core region, but there are not sufficient existing studies for them. From the existing studies, the coolant vapor pressure is considered as one of driving force to move the melt towards outside of the core. There is a complexity of the phenomena during intermixing of the melt with the coolant after the horizontal melt injections. It is too difficult to understand the several combined mechanisms related to the melt dispersion and the fragmentation. Thus, it could be worthwhile to study the horizontal melt injections at lower temperature as a preliminary study in order to identify the melt dispersion phenomena. For this reason, it is required to clarify whether the coolant vapor pressure is the driving force of the melt dispersion with the core region. The specific conditions to be well dispersed for the molten metallic fuel were discussed in the experiments with the simulant materials. The each melt behavior was compared to evaluate the melt dispersion under the coolant void condition and the boiling condition. As the results, the following results are remarked: 1. The upward melt dispersion did not occur for a given melt and coolant temperature in the nonboiling range. Over current range of conditions

On the cost-effectiveness of Carbon ion radiation therapy for skull base chordoma

International Nuclear Information System (INIS)

Jaekel, Oliver; Land, Beate; Combs, Stephanie Elisabeth; Schulz-Ertner, Daniela; Debus, Juergen

2007-01-01

Aim: The cost-effectiveness of Carbon ion radiotherapy (RT) for patients with skull base chordoma is analyzed. Materials and Methods: Primary treatment costs and costs for recurrent tumors are estimated. The costs for treatment of recurrent tumors were estimated using a sample of 10 patients presenting with recurrent chordoma at the base of skull at DKFZ. Using various scenarios for the local control rate and reimbursements of Carbon ion therapy the cost-effectiveness of ion therapy for these tumors is analyzed. Results: If local control rate for skull base chordoma achieved with carbon ion therapy exceeds 70.3%, the overall treatment costs for carbon RT are lower than for conventional RTI. The cost-effectiveness ratio for carbon RT is 2539 Euro per 1% increase in survival, or 7692 Euro per additional life year. Conclusion: Current results support the thesis that Carbon ion RT, although more expensive, is at least as cost-effective as advanced photon therapies for these patients. Ion RT, however, offers substantial benefits for the patients such as improved control rates and less severe side effects

[Streptococcus milleri: An unusual cause of skull extensive osteomyelitis in an immunocompetent patient].

Science.gov (United States)

Duquenne, C; Dernis, E; Zehrouni, A; Bizon, A; Duquenne, M

2017-09-01

Streptococcus milleri (Streptococcus anginosus, intermedius and constellatus) are commensal organisms, which can become pathogenic and cause infection with frequent abscess formation, local or metastatic extension. Osteomyelitis of the skull has been rarely reported in this type of infection. Skull osteomyelitis due to Streptococcus milleri is reported in a 61-year-old immunocompetent man without any medical history, occurring 10 months after a head injury without any wound or complication at initial presentation. A progressive right parieto-occipital headache with worsening and increased acute phase reactants evoked a giant cell arteritis. After few days of corticosteroid therapy (0.5 mg/kg/day), diagnosis of subcutaneous abscess associated to an extensive osteomyelitis of the skull due to Streptococcus milleri was diagnosed. The outcome was favorable after drainage of one liter of pus, irrigation, debridement and antibiotherapy by amoxicillin for 8 weeks. It is necessary to discuss the differential diagnosis of giant cell arteritis particularly when symptoms are unusual. Even a short-term corticosteroid therapy may dramatically exacerbate an undetected infection. Copyright © 2017. Published by Elsevier SAS.

Role of preoperative 3-dimensional computed tomography reconstruction in depressed skull fractures treated with craniectomy: a case report of forensic interest.

Science.gov (United States)

Viel, Guido; Cecchetto, Giovanni; Manara, Renzo; Cecchetto, Attilio; Montisci, Massimo

2011-06-01

Patients affected by cranial trauma with depressed skull fractures and increased intracranial pressure generally undergo neurosurgical intervention. Because craniotomy and craniectomy remove skull fragments and generate new fracture lines, they complicate forensic examination and sometimes prevent a clear identification of skull fracture etiology. A 3-dimensional reconstruction based on preoperative computed tomography (CT) scans, giving a picture of the injuries before surgical intervention, can help the forensic examiner in identifying skull fracture origin and the means of production.We report the case of a 41-year-old-man presenting at the emergency department with a depressed skull fracture at the vertex and bilateral subdural hemorrhage. The patient underwent 2 neurosurgical interventions (craniotomy and craniectomy) but died after 40 days of hospitalization in an intensive care unit. At autopsy, the absence of various bone fragments did not allow us to establish if the skull had been stricken by a blunt object or had hit the ground with high kinetic energy. To analyze bone injuries before craniectomy, a 3-dimensional CT reconstruction based on preoperative scans was performed. A comparative analysis between autoptic and radiological data allowed us to differentiate surgical from traumatic injuries. Moreover, based on the shape and size of the depressed skull fracture (measured from the CT reformations), we inferred that the man had been stricken by a cylindric blunt object with a diameter of about 3 cm.

Skulls, brains, and memorial culture: on cerebral biographies of scientists in the nineteenth century.

Science.gov (United States)

Hagner, Michael

2003-06-01

In this paper, I will argue that the scientific investigation of skulls and brains of geniuses went hand in hand with hagiographical celebrations of scientists. My analysis starts with late-eighteenth century anatomists and anthropologists who highlighted quantitative parameters such as the size and weight of the brain in order to explain intellectual differences between women and men and Europeans and non-Europeans, geniuses and ordinary persons. After 1800 these parameters were modified by phrenological inspections of the skull and brain. As the phrenological examination of the skulls of Immanuel Kant, Wilhelm Heinse, Arthur Schopenhauer and others shows, the anthropometrical data was interpreted in light of biographical circumstances. The same pattern of interpretation can be found in non-phrenological contexts: Reports about extraordinary brains were part of biographical sketches, mainly delivered in celebratory obituaries. It was only in this context that moral reservations about dissecting the brains of geniuses could be overcome, which led to a more systematic investigation of brains of geniuses after 1860.

Intraoperative Neurophysiological Monitoring for Endoscopic Endonasal Approaches to the Skull Base: A Technical Guide

Directory of Open Access Journals (Sweden)

Harminder Singh

2016-01-01

Full Text Available Intraoperative neurophysiological monitoring during endoscopic, endonasal approaches to the skull base is both feasible and safe. Numerous reports have recently emerged from the literature evaluating the efficacy of different neuromonitoring tests during endonasal procedures, making them relatively well-studied. The authors report on a comprehensive, multimodality approach to monitoring the functional integrity of at risk nervous system structures, including the cerebral cortex, brainstem, cranial nerves, corticospinal tract, corticobulbar tract, and the thalamocortical somatosensory system during endonasal surgery of the skull base. The modalities employed include electroencephalography, somatosensory evoked potentials, free-running and electrically triggered electromyography, transcranial electric motor evoked potentials, and auditory evoked potentials. Methodological considerations as well as benefits and limitations are discussed. The authors argue that, while individual modalities have their limitations, multimodality neuromonitoring provides a real-time, comprehensive assessment of nervous system function and allows for safer, more aggressive management of skull base tumors via the endonasal route.

Rapakivi texture formation via disequilibrium melting in a contact partial melt zone, Antarctica

Science.gov (United States)

Currier, R. M.

2017-12-01

In the McMurdo Dry Valleys of Antarctica, a Jurassic aged dolerite sill induced partial melting of granite in the shallow crust. The melt zone can be traced in full, from high degrees of melting (>60%) along the dolerite contact, to no apparent signs of melting, 10s of meters above the contact. Within this melt zone, the well-known rapakivi texture is found, arrested in various stages of development. High above the contact, and at low degrees of melting, K-feldspar crystals are slightly rounded and unmantled. In the lower half of the melt zone, mantles of cellular textured plagioclase appear on K-feldspar, and thicken towards the contact heat source. At the highest degrees of melting, cellular-textured plagioclase completely replaces restitic K-feldspar. Because of the complete exposure and intact context, the leading models of rapakivi texture formation can be tested against this system. The previously proposed mechanisms of subisothermal decompression, magma-mixing, and hydrothermal exsolution all fail to adequately describe rapakivi generation in this melt zone. Preferred here is a closed system model that invokes the production of a heterogeneous, disequilibrium melt through rapid heating, followed by calcium and sodium rich melt reacting in a peritectic fashion with restitic K-feldspar crystals. This peritectic reaction results in the production of plagioclase of andesine-oligoclase composition—which is consistent with not just mantles in the melt zone, but globally as well. The thickness of the mantle is diffusion limited, and thus a measure of the diffusive length scale of sodium and calcium over the time scale of melting. Thermal modeling provides a time scale of melting that is consistent with the thickness of observed mantles. Lastly, the distribution of mantled feldspars is highly ordered in this melt zone, but if it were mobilized and homogenized—mixing together cellular plagioclase, mantled feldspars, and unmantled feldspars—the result would be