Genetic structure of Rajaka caste and affinities with other caste populations of Andhra Pradesh, India.

Science.gov (United States)

Parvatheesam, C; Babu, B V; Babu, M C

1997-01-01

The present study gives an account of the genetic structure in terms of distribution of a few genetic markers, viz., A1A2B0, Rh(D), G6PD deficiency and haemoglobin among the Rajaka caste population of Andhra Pradesh, India. The genetic relationships of the Rajaka caste with other Andhra caste populations were investigated in terms of genetic distance, i.e., Sq B (mn) of Balakrishnan and Sanghvi. Relatively lesser distance was established between the Rajaka and two Panchama castes. Also, the pattern of genetic distance corroborates the hierarchical order of the Hindu varna system.

Evaluation of arch width variations among different skeletal patterns in South Indian population.

Science.gov (United States)

Prasad, Mandava; Kannampallil, Senny Thomas; Talapaneni, Ashok Kumar; George, Suja Ani; Shetty, Sharath Kumar

2013-01-01

Anterior cranial base can be taken as a reference line (SN) to determine the steepness of mandibular plane. Subjects with high mandibular plane angle tend to have a long face and one with low MP-SN angle has a shorter face. This study was done to investigate if dental arch widths correlated with vertical facial types and if there are any differences in arch widths between untreated male and female adults in South Indian population. Lateral cephalogram and dental casts were obtained from 180 untreated South Indian adults (90 males and 90 females) above 18 year old with no cross bite, minimal crowding and spacing. The angle between the anterior cranial base and the mandibular plane was measured on lateral cephalogram of each patient. Dental casts were used to obtain comprehensive dental measurements including maxillary and mandibular inter canine, inter premolar and inter molar widths, as well as amount of crowding or spacing. The results showed that male arch widths were significantly larger than those of females (P population. The results obtained in our study when compared with studies done in other population groups showed that there is difference in inter arch widths according to ethnicity and race. It was concluded that the dental arch width is associated with gender, race and vertical facial morphology. Thus using individualized arch wires according to each patient's pre treatment arch form and width is suggested during orthodontic treatment.

Y-chromosomal insights into the genetic impact of the caste system in India.

Science.gov (United States)

Zerjal, Tatiana; Pandya, Arpita; Thangaraj, Kumarasamy; Ling, Edmund Y S; Kearley, Jennifer; Bertoneri, Stefania; Paracchini, Silvia; Singh, Lalji; Tyler-Smith, Chris

2007-03-01

The caste system has persisted in Indian Hindu society for around 3,500 years. Like the Y chromosome, caste is defined at birth, and males cannot change their caste. In order to investigate the genetic consequences of this system, we have analysed male-lineage variation in a sample of 227 Indian men of known caste, 141 from the Jaunpur district of Uttar Pradesh and 86 from the rest of India. We typed 131 Y-chromosomal binary markers and 16 microsatellites. We find striking evidence for male substructure: in particular, Brahmins and Kshatriyas (but not other castes) from Jaunpur each show low diversity and the predominance of a single distinct cluster of haplotypes. These findings confirm the genetic isolation and drift within the Jaunpur upper castes, which are likely to result from founder effects and social factors. In the other castes, there may be either larger effective population sizes, or less strict isolation, or both.

An anthropometric analysis of facial height, arch length, and palatal rugae in the Indian and Nepalese population.

Science.gov (United States)

Kallianpur, Shreenivas; Desai, Ami; Kasetty, Sowmya; Sudheendra, Us; Joshi, Prathamesh

2011-01-01

A country such as India abounds with diverse population groups with distinct anthropometric characteristics. Among these, numerous Nepalese population groups are present in different states of India comprising one of the most common immigrant races. The aim of the study is to compare two distinct races, Indians and Nepalese on the basis of facial height proportions, arch length and palatal rugae patterns and assess their significance in racial identification. A total of 120 subjects comprising of 60 Indians and 60 Nepalese were selected, with each group including 30 males and 30 females. Facial heights were measured using sliding digital calipers, arch lengths with the help of a brass wire and rugae patterns were traced on dental casts obtained with alginate impressions. Facial height measurements did not give significant results for racial or gender identification of given races. Differences between arch length parameters were found to be significant between the two population groups. Secondary and fragmentary palatal rugae forms were found to be more common in Nepalese than Indians. The Indian and Nepalese have similar anthropometric characteristics with regard to facial height. However, arch length and palatal rugae characteristics vary between the two races.

Dalit women in India: at the crossroads of gender, class, and caste

OpenAIRE

Sabharwal, Nidhi Sadana; Sonalkar, Wandana

2015-01-01

As the lowest in the caste hierarchy, Dalits in Indian society have historically suffered caste-based social exclusion from economic, civil, cultural, and political rights. Women from this community suffer from not only discrimination based on their gender but also caste identity and consequent economic deprivation. Dalit women constituted about 16.60 percent of India’s female population in 2011. Dalit women’s problems encompass not only gender and economic deprivation but also discrimination...

Patterns of genetic diversity at the nine forensically approved STR loci in the Indian populations.

Science.gov (United States)

Dutta, Ranjan; Reddy, B Mohan; Chattopadhyay, P; Kashyap, V K; Sun, Guangyun; Deka, Ranjan

2002-02-01

Genetic diversity at the nine short tandem repeat (STR) loci, which are universally approved and widely used for forensic investigations, has been studied among nine Indian populations with diverse ethnic, linguistic, and geographic backgrounds. The nine STR loci were profiled on 902 individuals using fluorescent detection methods on an ABI377 System, with the aid of an Amp-F1 Profiler Plus Kit. The studied populations include two upper castes, Brahmin and Kayastha; a tribe, Garo, from West Bengal; a Hindu caste, Meitei, with historical links to Bengal Brahmins; a migrant group of Muslims; three tribal groups, Naga, Kuki and Hmar, from Manipur in northeast India; and a middle-ranking caste, Golla, who are seminomadic herders from Andhra Pradesh. Gene diversity analysis suggests that the average heterozygosity is uniformly high (>0.8) in the studied populations, with the coefficient of gene differentiation at 0.050 +/- 0.0054. Both neighbor-joining (NJ) and unweighted pair group method with arithmetic mean (UPGMA) trees based on DA distances bring out distinct clusters that are consistent with ethnic, linguistic, and/or geographic backgrounds of the populations. The fit of the Harpending and Ward model of regression of average heterozygosity on the gene frequency centroid is found to be good, and the observed outliers are consistent with the population structure and history of the studied populations. Our study suggests that the nine STR loci, used so far mostly for forensic investigations, can be used fruitfully for microevolutionary studies as well, and for reconstructing the phylogenetic history of human populations, at least at the local level.

Genetic affinities between endogamous and inbreeding populations of Uttar Pradesh.

Science.gov (United States)

Khan, Faisal; Pandey, Atul Kumar; Tripathi, Manorma; Talwar, Sudha; Bisen, Prakash S; Borkar, Minal; Agrawal, Suraksha

2007-04-07

India has experienced several waves of migration since the Middle Paleolithic. It is believed that the initial demic movement into India was from Africa along the southern coastal route, approximately 60,000-85,000 years before present (ybp). It has also been reported that there were two other major colonization which included eastward diffusion of Neolithic farmers (Elamo Dravidians) from Middle East sometime between 10,000 and 7,000 ybp and a southern dispersal of Indo Europeans from Central Asia 3,000 ybp. Mongol entry during the thirteenth century A.D. as well as some possible minor incursions from South China 50,000 to 60,000 ybp may have also contributed to cultural, linguistic and genetic diversity in India. Therefore, the genetic affinity and relationship of Indians with other world populations and also within India are often contested. In the present study, we have attempted to offer a fresh and immaculate interpretation on the genetic relationships of different North Indian populations with other Indian and world populations. We have first genotyped 20 tetra-nucleotide STR markers among 1800 north Indian samples of nine endogamous populations belonging to three different socio-cultural strata. Genetic distances (Nei's DA and Reynold's Fst) were calculated among the nine studied populations, Caucasians and East Asians. This analysis was based upon the allelic profile of 20 STR markers to assess the genetic similarity and differences of the north Indian populations. North Indians showed a stronger genetic relationship with the Europeans (DA 0.0341 and Fst 0.0119) as compared to the Asians (DA 0.1694 and Fst - 0.0718). The upper caste Brahmins and Muslims were closest to Caucasians while middle caste populations were closer to Asians. Finally, three phylogenetic assessments based on two different NJ and ML phylogenetic methods and PC plot analysis were carried out using the same panel of 20 STR markers and 20 geo-ethnic populations. The three phylogenetic

Genetic affinities between endogamous and inbreeding populations of Uttar Pradesh

Directory of Open Access Journals (Sweden)

Borkar Minal

2007-04-01

Full Text Available Abstract Background India has experienced several waves of migration since the Middle Paleolithic. It is believed that the initial demic movement into India was from Africa along the southern coastal route, approximately 60,000–85,000 years before present (ybp. It has also been reported that there were two other major colonization which included eastward diffusion of Neolithic farmers (Elamo Dravidians from Middle East sometime between 10,000 and 7,000 ybp and a southern dispersal of Indo Europeans from Central Asia 3,000 ybp. Mongol entry during the thirteenth century A.D. as well as some possible minor incursions from South China 50,000 to 60,000 ybp may have also contributed to cultural, linguistic and genetic diversity in India. Therefore, the genetic affinity and relationship of Indians with other world populations and also within India are often contested. In the present study, we have attempted to offer a fresh and immaculate interpretation on the genetic relationships of different North Indian populations with other Indian and world populations. Results We have first genotyped 20 tetra-nucleotide STR markers among 1800 north Indian samples of nine endogamous populations belonging to three different socio-cultural strata. Genetic distances (Nei's DA and Reynold's Fst were calculated among the nine studied populations, Caucasians and East Asians. This analysis was based upon the allelic profile of 20 STR markers to assess the genetic similarity and differences of the north Indian populations. North Indians showed a stronger genetic relationship with the Europeans (DA 0.0341 and Fst 0.0119 as compared to the Asians (DA 0.1694 and Fst – 0.0718. The upper caste Brahmins and Muslims were closest to Caucasians while middle caste populations were closer to Asians. Finally, three phylogenetic assessments based on two different NJ and ML phylogenetic methods and PC plot analysis were carried out using the same panel of 20 STR markers and 20

25 CFR 217.6 - Method of casting votes.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Method of casting votes. 217.6 Section 217.6 Indians.... § 217.6 Method of casting votes. Within 30 days after an issue and any analysis provided for in §§ 217.4... superintendent in writing of the number of votes cast for and against the proposed or alternative solutions. If...

Caste and power

DEFF Research Database (Denmark)

Roy, Dayabati

2011-01-01

This paper explores the institution of caste and its operation in a micro-level village setting of West Bengal, an Indian state, where state politics at grass roots level is vibrant with functioning local self-government and entrenched political parties. This ethnographic study reveals that caste...... relations and caste identities have overarching dimensions in the day-to-day politics of the study villages. Though caste almost ceases to operate in relation to strict religious strictures, under economic compulsion the division of labour largely coincides with caste division. In the cultural......–ideological field, the concept of caste-hierarchy seems to continue as an influencing factor, even in the operation of leftist politics....

The paternal ancestry of Uttarakhand does not imitate the classical caste system of India.

Science.gov (United States)

Negi, Neetu; Tamang, Rakesh; Pande, Veena; Sharma, Amrita; Shah, Anish; Reddy, Alla G; Vishnupriya, Satti; Singh, Lalji; Chaubey, Gyaneshwer; Thangaraj, Kumarasamy

2016-02-01

Although, there have been rigorous research on the Indian caste system by several disciplines, it is still one of the most controversial socioscientific topic. Previous genetic studies on the subcontinent have supported a classical hierarchal sharing of genetic component by various castes of India. In the present study, we have used high-resolution mtDNA and Y chromosomal markers to characterize the genetic structuring of the Uttarakhand populations in the context of neighboring regions. Furthermore, we have tested whether the genetic structuring of caste populations at different social levels of this region, follow the classical chaturvarna system. Interestingly, we found that this region showed a high level of variation for East Eurasian ancestry in both maternal and paternal lines of descent. Moreover, the intrapopulation comparison showed a high level of heterogeneity, likely because of different caste hierarchy, interpolated on asymmetric admixture of populations inhabiting on both sides of the Himalayas.

Genetic variations in the Dravidian population of South West coast of India: Implications in designing case-control studies.

Science.gov (United States)

D'Cunha, Anitha; Pandit, Lekha; Malli, Chaithra

2017-06-01

Indian data have been largely missing from genome-wide databases that provide information on genetic variations in different populations. This hinders association studies for complex disorders in India. This study was aimed to determine whether the complex genetic structure and endogamy among Indians could potentially influence the design of case-control studies for autoimmune disorders in the south Indian population. A total of 12 single nucleotide variations (SNVs) related to genes associated with autoimmune disorders were genotyped in 370 healthy individuals belonging to six different caste groups in southern India. Allele frequencies were estimated; genetic divergence and phylogenetic relationship within the various caste groups and other HapMap populations were ascertained. Allele frequencies for all genotyped SNVs did not vary significantly among the different groups studied. Wright's FSTwas 0.001 per cent among study population and 0.38 per cent when compared with Gujarati in Houston (GIH) population on HapMap data. The analysis of molecular variance results showed a 97 per cent variation attributable to differences within the study population and variation due to differences between castes. Phylogenetic analysis showed a separation of Dravidian population from other HapMap populations and particularly from GIH population. Despite the complex genetic origins of the Indian population, our study indicated a low level of genetic differentiation among Dravidian language-speaking people of south India. Case-control studies of association among Dravidians of south India may not require stratification based on language and caste.

Do attitudes toward societal structure predict beliefs about free will and achievement? Evidence from the Indian caste system.

Science.gov (United States)

Srinivasan, Mahesh; Dunham, Yarrow; Hicks, Catherine M; Barner, David

2016-01-01

Intuitive theories about the malleability of intellectual ability affect our motivation and achievement in life. But how are such theories shaped by the culture in which an individual is raised? We addressed this question by exploring how Indian children's and adults' attitudes toward the Hindu caste system--and its deterministic worldview--are related to differences in their intuitive theories. Strikingly, we found that, beginning at least in middle school and continuing into adulthood, individuals who placed more importance on caste were more likely to adopt deterministic intuitive theories. We also found a developmental change in the scope of this relationship, such that in children, caste attitudes were linked only to abstract beliefs about personal freedom, but that by adulthood, caste attitudes were also linked to beliefs about the potential achievement of members of different castes, personal intellectual ability, and personality attributes. These results are the first to directly relate the societal structure in which a person is raised to the specific intuitive theories they adopt. © 2015 John Wiley & Sons Ltd.

Genetic affinities of north and northeastern populations of India: inference from HLA-based study.

Science.gov (United States)

Agrawal, S; Srivastava, S K; Borkar, M; Chaudhuri, T K

2008-08-01

India is like a microcosm of the world in terms of its diversity; religion, climate and ethnicity which leads to genetic variations in the populations. As a highly polymorphic marker, the human leukocyte antigen (HLA) system plays an important role in the genetic differentiation studies. To assess the genetic diversity of HLA class II loci, we studied a total of 1336 individuals from north India using DNA-based techniques. The study included four endogamous castes (Kayastha, Mathurs, Rastogies and Vaishyas), two inbreeding Muslim populations (Shias and Sunnis) from north India and three northeast Indian populations (Lachung, Mech and Rajbanshi). A total of 36 alleles were observed at DRB1 locus in both Hindu castes and Muslims from north, while 21 alleles were seen in northeast Indians. At the DQA1 locus, the number of alleles ranged from 11 to 17 in the studied populations. The total number of alleles at DQB1 was 19, 12 and 20 in the studied castes, Muslims and northeastern populations, respectively. The most frequent haplotypes observed in all the studied populations were DRB1*0701-DQA1*0201-DQB1*0201 and DRB1*1501-DQA1*0103-DQB1*0601. Upon comparing our results with other world populations, we observed the presence of Caucasoid element in north Indian population. However, differential admixturing among Sunnis and Shias with the other north Indians was evident. Northeastern populations showed genetic affinity with Mongoloids from southeast Asia. When genetic distances were calculated, we found the north Indians and northeastern populations to be markedly unrelated.

Temperature profile data from EBT casts in the Indian Ocean from 13 February 1986 to 01 January 1989 (NODC Accession 0000210)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile data were collected using EBT casts in the Indian Ocean from the MYS OSTROVSKOGO, IGNAT PAVLYUCHENKOV, ZVEZDA AZOVA, and KARA-DAG from February...

Clinical applications and implications of common and founder mutations in Indian subpopulations.

Science.gov (United States)

Ankala, Arunkanth; Tamhankar, Parag M; Valencia, C Alexander; Rayam, Krishna K; Kumar, Manisha M; Hegde, Madhuri R

2015-01-01

South Asian Indians represent a sixth of the world's population and are a racially, geographically, and genetically diverse people. Their unique anthropological structure, prevailing caste system, and ancient religious practices have all impacted the genetic composition of most of the current-day Indian population. With the evolving socio-religious and economic activities of the subsects and castes, endogamous and consanguineous marriages became a commonplace. Consequently, the frequency of founder mutations and the burden of heritable genetic disorders rose significantly. Specifically, the incidence of certain autosomal-recessive disorders is relatively high in select Indian subpopulations and communities that share common recent ancestry. Although today clinical genetics and molecular diagnostic services are making inroads in India, the high costs associated with the technology and the tests often keep patients from an exact molecular diagnosis, making more customized and tailored tests, such as those interrogating the most common and founder mutations or those that cater to select sects within the population, highly attractive. These tests offer a quick first-hand affordable diagnostic and carrier screening tool. Here, we provide a comprehensive catalog of known common mutations and founder mutations in the Indian population and discuss them from a molecular, clinical, and historical perspective. © 2014 WILEY PERIODICALS, INC.

Zooplankton species identities collected from zooplankton net casts in Indian Ocean from 17 February 1960 to 23 July 1962 (NODC Accession 9400059)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Zooplankton species identities and other data were collected using zooplankton net casts in the Indian Ocean. Data were collected from 17 February 1960 to 23 July...

Temperature, salinity, and other data from CTD casts in the Indian Ocean and other locations from 19890901 to 19910831 (NODC Accession 9700263)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, salinity, and other data were collected from CTD casts in the Mediterranean Sea, Indian Ocean, and other locations from 01 September 1989 to 31 August...

Directional migration in the Hindu castes: inferences from mitochondrial, autosomal and Y-chromosomal data.

Science.gov (United States)

Wooding, Stephen; Ostler, Christopher; Prasad, B V Ravi; Watkins, W Scott; Sung, Sandy; Bamshad, Mike; Jorde, Lynn B

2004-08-01

Genetic, ethnographic, and historical evidence suggests that the Hindu castes have been highly endogamous for several thousand years and that, when movement between castes does occur, it typically consists of females joining castes of higher social status. However, little is known about migration rates in these populations or the extent to which migration occurs between caste groups of low, middle, and high social status. To investigate these aspects of migration, we analyzed the largest collection of genetic markers collected to date in Hindu caste populations. These data included 45 newly typed autosomal short tandem repeat polymorphisms (STRPs), 411 bp of mitochondrial DNA sequence, and 43 Y-chromosomal single-nucleotide polymorphisms that were assayed in more than 200 individuals of known caste status sampled in Andrah Pradesh, in South India. Application of recently developed likelihood-based analyses to this dataset enabled us to obtain genetically derived estimates of intercaste migration rates. STRPs indicated migration rates of 1-2% per generation between high-, middle-, and low-status caste groups. We also found support for the hypothesis that rates of gene flow differ between maternally and paternally inherited genes. Migration rates were substantially higher in maternally than in paternally inherited markers. In addition, while prevailing patterns of migration involved movement between castes of similar rank, paternally inherited markers in the low-status castes were most likely to move into high-status castes. Our findings support earlier evidence that the caste system has been a significant, long-term source of population structuring in South Indian Hindu populations, and that patterns of migration differ between males and females. Copyright 2004 Springer-Verlag

Prevalence rates of ADIPOQ polymorphisms in Indian population and a comparison with other populations

Directory of Open Access Journals (Sweden)

Sandhya Kiran Pemmasani

2018-01-01

Full Text Available Introduction: The adiponectin gene, ADIPOQ, encodes an adipocytokine, known as adiponectin hormone. This hormone is known to be associated with insulin sensitization, fat metabolism, immunity, and inflammatory response. Polymorphisms in ADIPOQ gene lower the adiponectin levels, increasing the risk for diabetes and cardiovascular diseases. Aims: The study aimed to calculate the prevalence rates of ADIPOQ polymorphisms in Indian population and to compare those prevalence rates with that of other populations. Subjects and Methods: Microarray-based genotypic data of 14 ADIPOQ polymorphisms from 703 individuals of Indian origin were used. Statistical Analysis Used: Frequency estimation, identity-by-descent, Hardy–Weinberg equilibrium, Chi-square test of significance were used for statistical analysis. Results: Allelic and genotypic frequencies of ADIPOQ polymorphisms, Chi-square tests of significance for allelic and genotypic frequencies across various populations. Conclusions: East Asians are very different from Indians in terms of allelic and genotypic frequencies of ADIPOQ polymorphisms. Europeans have similar genotypic and allelic patterns with Indians. Admixture Americans and Africans also showed significant differences with polymorphisms of the Indian population.

INDIAN CASTE SYSTEM: HISTORICAL AND PSYCHOANALYTIC VIEWS.

Science.gov (United States)

Vallabhaneni, Madhusudana Rao

2015-12-01

This paper elucidates the historical origins and transformations of India's caste system. Surveying the complex developments over many centuries, it points out that three positions have been taken in this regard. One suggests that the caste one is born into can be transcended within one's lifetime by performing good deeds. The other declares caste to be immutable forever. And, the third says that one can be reborn into a higher caste if one lives a virtuous life. Moving on to the sociopolitical realm, the paper notes how these positions have been used and exploited. The paper then attempts to anchor the existence and purpose of the Hindu caste system in Freud's ideas about group psychology and Klein's proposals of splitting and projective identification. The paper also deploys the large group psychology concepts of Volkan and the culturally nuanced psychoanalytic anthropology of Roland and Kakar. It concludes with delineating some ameliorative strategies for this tragic problem in the otherwise robust democratic society of India.

Identification of the Rare, Four Repeat Allele of IL-4 Intron-3 VNTR Polymorphism in Indian Populations.

Science.gov (United States)

Verma, Henu Kumar; Jha, Aditya Nath; Khodiar, Prafulla Kumar; Patra, Pradeep Kumar; Bhaskar, Lakkakula Venkata Kameswara Subrahmanya

2016-06-01

Cytokines are cell signaling molecules which upon release by cells facilitate the recruitment of immune-modulatory cells towards the sites of inflammation. Genetic variations in cytokine genes are shown to regulate their production and affect the risk of infectious as well as autoimmune diseases. Intron-3 of interleukin-4 gene (IL-4) harbors 70-bp variable number of tandem repeats (VNTR) that may alter the expression level of IL-4 gene. To determine the distribution of IL-4 70-bp VNTR polymorphism in seven genetically heterogeneous populations of Chhattisgarh, India and their comparison with the finding of other Indian and world populations. A total of 371 healthy unrelated individuals from 5 caste and 2 tribal populations were included in the present study. The IL-4 70-bp VNTR genotyping was carried out using PCR and electrophoresis. Overall, 3 alleles of IL-4 70-bp VNTR (a2, a3 and a4) were detected. The results demonstrated the variability of the IL-4 70-bp VNTR polymorphism in Chhattisgarh populations. Allele a3 was the most common allele at the 70-bp VNTR locus in all populations followed by a2 allele. This study reports the presence four repeat allele a4 at a low frequency in the majority of the Chhattisgarh populations studied. Further, the frequency of the minor allele (a2) in Chhattisgarh populations showed similarity with the frequencies of European populations but not with the East Asian populations where the a2 allele is a major allele. Our study provides a baseline for future research into the role of the IL-4 locus in diseases linked to inflammation in Indian populations.

Ideological Support for the Indian Caste System: Social Dominance Orientation, Right-Wing Authoritarianism and Karma

Directory of Open Access Journals (Sweden)

Sarah Cotterill

2014-06-01

Full Text Available This paper extends the social dominance perspective to the Indian context by examining the role of belief in Karma (sanchita in the justification of the Indian caste system. Using social dominance theory (Sidanius & Pratto, 1999 and the dual process model (Duckitt, 2001 as guiding theoretical frameworks, we tested four related hypotheses within a sample of 385 Indian university students. In particular we expected that social dominance orientation (SDO and right-wing authoritarianism (RWA would both make relatively strong and independent contributions to participants’ endorsement of Karma (H1, as well as their support for antiegalitarian social policies and conventions (H2. We also predicted that endorsement of Karma, itself, would be strongly related to support for these policies, net of the influence of SDO, RWA, as well as generalized prejudice (H3. Finally, and consistent with the notion that Karma functions as a legitimizing ideology, we hypothesized that it would at least partially mediate, net of generalized prejudice, the relationships between SDO and RWA, on the one hand, and antiegalitarian and conventional social policies, on the other (H4. Results of latent variable structural equation modeling provided support for all four hypotheses. The theoretical implications of these findings are discussed.

Breast density in screening mammography in Indian population - Is it different from western population?

Science.gov (United States)

Singh, Tulika; Khandelwal, Niranjan; Singla, Veenu; Kumar, Dileep; Gupta, Madhu; Singh, Gurpreet; Bal, Amanjit

2018-05-01

Mammography is the only method presently considered appropriate for mass screening of breast cancer. However, higher breast density was strongly associated with lower mammographic sensitivity. Breast density is also identified as independent and strongest risk factors for breast cancer. Studies have shown women with high breast density have four to six times increased risk of breast cancer as compare to women with fatty breast. It varies between different age group it generally decreases with increasing age in postmenopausal women and it can be different in different ethnic groups and people from different geographical areas. This study evaluates the breast density in Indian population and its relationship with the age. We reviewed of all screening mammography examinations performed from May 2012 to January 2015 at our institute PGIMER, Chandigarh, INDIA. Descriptive analyses were used to examine the association between age and breast density. A total of 6132 screening mammograms were performed. Each subgroup categorized by decade of age. There was a significant inverse relationship between age and breast density (P density in Indian and Western population with more Indians having ACR Grade 1 and 2 and Western population having 2 and 3. We found an inverse relationship between patient age and mammographic breast density. However, there were a large proportion of young women who had lower grades of mammographic density which could potentially benefit from the use of routine screening mammography in this subgroup of patients. Moreover, the breast density of Indian population is less when compared to the Western population. This might suggest that mammography is a good modality of choice for screening Indian population. © 2017 Wiley Periodicals, Inc.

Understanding the Persistence of Caste: A Commentary on Cotterill, Sidanius, Bhardwaj and Kumar (2014

Directory of Open Access Journals (Sweden)

Yashpal A. Jogdand

2016-08-01

Full Text Available We contextualise Cotterill, Sidanius, Bhardwaj, and Kumar’s (2014 paper within a broader literature on caste and collective mobilisation. Cotterill and colleagues’ paper represents a fresh and timely attempt to make sense of the persistence of caste from the perspective of Social Dominance Theory. Cotterill and colleagues, however, do not examine caste differences in the endorsement of karma, and take behavioural asymmetry among lower castes for granted. Cotterill and colleagues also adhere to a Varna model of the caste system that arguably is simplistic and benefits the upper castes of Indian society. We caution that emphasising behavioural asymmetry and endorsing the Varna model might further stigmatise lower castes, especially Dalits, and feed into a conformity bias already predominant in caste-related psychological research. We argue that the conceptualisation and operationalisation of Right-Wing Authoritarianism, Social Dominance Orientation and legitimising myths in the Indian context needs to take into account the particular meaning and functions of these constructs in specific intergroup contexts, and for identity positions salient within these contexts. We contend that any examination aimed at better understanding the nature of social hierarchy and oppression within the caste system and Indian society in general remains inconclusive without including a focus on the construction and contestation of social categories and social identities.

Complex genetic origin of Indian populations and its implications

Indian Academy of Sciences (India)

2012-10-15

Oct 15, 2012 ... statistical analyses, we predicted that the present-day. Indian populations .... of type 2 diabetes only amongst Indians (Metspalu et al. 2011). Our other ... A new variety of spondyloepi(meta)physeal dysplasia of the autosomal ...

Caste in India, Past and Present

Science.gov (United States)

Bishop, Donald H.

1971-01-01

Traced is the sociocultural framework for the system in Indian culture which emphasized duty and obligations rather than individual freedom and rights. Also discussed are contemporary changes in the caste system. (DB)

Anthropometric analysis of the hip joint in South Indian population using computed tomography

Directory of Open Access Journals (Sweden)

Vetrivel Chezian Sengodan

2017-01-01

Conclusion: This study indicates that there are significant differences in anthropometric parameters of proximal femur among the South Indian population compared with Western population. Even within the Indian population, the anthropometric parameters vary region to region.

Physical, nutrients, and other data from CTD, MBT, XBT, and bottle casts from the Indian Ocean from 01 January 1976 to 31 December 1996 (NODC Accession 0000462)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical, nutrients, and other data were collected from CTD, MBT, XBT, and bottle casts from the Indian Ocean. Data were collected from 01 January 1976 to 31...

Diversity of palatal rugae patterns and their reliability in sex discrimination in a South Indian population

Directory of Open Access Journals (Sweden)

Sai Madhavi Nallamilli

2015-01-01

Full Text Available Introduction and Aims: Array of palatal rugae in the realm of forensic odontology has been constantly explored owing to their individual uniqueness and resistance to postmortem procedures, while their scope in sex determination and racial profiling remains understated. In this context, the present study aimed to record the diversity of palatal rugae patterns in a South Indian population. Materials and Methods: A descriptive cross-sectional study was conducted among people who reported to the outpatient department of a dental institution. Sample comprised a total of 200 subjects divided into two groups of 100 each, based upon gender. Impressions of anterior maxilla were made of all the study subjects and casts obtained subsequently. Outline of palatal rugae pattern was traced on these models and the data computed. Z test and unpaired t-test were used for statistical analysis and the probability value calculated. In addition, logistic regression analysis was performed to estimate the accuracy of sex allocation. Results: The shape of rugae exhibited highly significant sex difference in the curved type, which was found to be higher in males, and in the wavy type which was higher in females, enabling sex differentiation using palatal rugae patterns. Logistic regression analysis predicted high power of sex allocation for males rather than females in the study population. Conclusion: This study highlighted the uniqueness and greater sex discrimination potential of curved shape of palatal rugae in categorizing males of South Indian population, substantiating their use in the identification of deceased, by relating the antemortem and postmortem dental records.

Temperature profile data collected using CTD casts from NOAA Ship RESEARCHER in the TOGA area - Indian from 1979-04-15 to 1979-06-02 (NODC Accession 8200199)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and other data were collected using CTD casts from NOAA Ship RESEARCHER in the TOGA Area - Indian from 15 April 1979 to 02 June 1979. Data were...

DISTRIBUTION OF CCR2-64I GENE AMONG THE TRIBES AND CASTE POPULATION OF VIDARBHA, INDIA.

Directory of Open Access Journals (Sweden)

Arvind B Chavhan

2013-08-01

Results: The genotyping for the CCR2-64I mutation among the selected tribe and a caste reveal that all of the tribes and a caste was found to be heterozygous for the CCR2-64I mutation. Among the tribes Gonds showed highest genotype frequency (29.28% and (11.76% for heterozygous (CCR2/64I and Homozygous (64I/64I respectively, having an allelic frequency (0.233. A pooled allelic frequencies of the wild-type allele CCR2 and CCR2 64I the variant were found to be 0.854 and 0.146, respectively. No significant deviations from the HWE were observed for tribes and a caste population for the CCR2- 64I mutant χ2=2.76. The study reports the presence of mutant CCR2- 64I gene in tribes and caste population from Vidarbha region.

Evaluation of the nasolabial angle in the Indian population

Science.gov (United States)

Dua, Vinay; Gupta, Shilpa; Singh, Chanjyot

2010-01-01

Nasolabial angle has become the angle depicting the esthetics so has attained the prime importance in the treatment planning. Dr Jay P. Fitzgerland and Dr. Ram S. Nanda. In 1992 gave norms for Caucasian population. A radiographic cephalometric study was undertaken with 45 subjects of Indian origin to evaluate and compare with their result. The method of evaluation was according to the criteria given by Dr. Jay P Fitzergerald in AJODO 1992; 102:328-34. Significant decrease in nasolabial angle values was found in case of Indian population as compared to white adults. PMID:22114388

Do scheduled caste and scheduled tribe women legislators mean lower gender-caste gaps in primary schooling in India?

Science.gov (United States)

Halim, Nafisa; Yount, Kathryn M; Cunningham, Solveig

2016-07-01

Despite India's substantial investments in primary schooling, gaps in schooling persist across gender and caste-with scheduled caste and scheduled tribe (SC/ST) girls being particularly disadvantaged. The representation of SC/ST women in state legislatures may help to mitigate this disadvantage. Specifically, because of her intersecting gender and caste/tribe identities, a SC/ST woman legislator might maintain a strong sense of solidarity especially with SC/ST girls and women, and support legislative policies benefitting SC/ST girls. Consequently, for this reason, we expect that living in a district where SC/ST women represent in state legislatures in a higher proportion may increase SC/ST girls' primary school completion, progression and performance. We tested this hypothesis using district-level data between 2000 and 2004 from the Indian Election Commission, the 2004/5 India Human Development Survey, and the Indian Census of 2001. As expected, the representation of SC/ST women in state legislatures was positively associated with SC/ST girls' grade completion and age-appropriate grade progression but was apparent not SC/ST girls' primary-school performance. SC/ST women's representation in state legislatures may reduce gender-caste gaps in primary-school attainment in India. Copyright © 2016. Published by Elsevier Inc.

Population Genetic Status of the Western Indian Ocean

African Journals Online (AJOL)

Abstract—Population genetics offers a useful technique for studying the population structure of marine organisms and has relevance to both systematics and the conservation of biodiversity. The Western Indian Ocean (WIO) is faced with increasing evidence of degradation and effective management initiatives are needed to ...

Nutritional status of the Indian population

Indian Academy of Sciences (India)

In addition, the Indian population is passing through a nutritional transition and is expected to witness higher prevalences of adult non-communicable diseases such as diabetes, hypertension and coronary heart disease according to the theory of `fetal origin of adult disease'. Clearly, there is a need for examining several ...

Arnett′s soft-tissue cephalometric analysis norms for the North Indian population: A cephalometric study

Directory of Open Access Journals (Sweden)

Tripti Tikku

2014-01-01

Conclusion: Statistically significant differences in certain parameters were found between North Indian population and Caucasian population and also between males and females of North Indian population.

Evaluation of the nasolabial angle in the Indian population

Directory of Open Access Journals (Sweden)

Vinay Dua

2010-01-01

Full Text Available Nasolabial angle has become the angle depicting the esthetics so has attained the prime importance in the treatment planning. Dr Jay P. Fitzgerland and Dr. Ram S. Nanda. In 1992 gave norms for Caucasian population. A radiographic cephalometric study was undertaken with 45 subjects of Indian origin to evaluate and compare with their result. The method of evaluation was according to the criteria given by Dr. Jay P Fitzergerald in AJODO 1992; 102:328-34. Significant decrease in nasolabial angle values was found in case of Indian population as compared to white adults.

IL10 Variant g.5311A Is Associated with Visceral Leishmaniasis in Indian Population.

Directory of Open Access Journals (Sweden)

Anshuman Mishra

Full Text Available Visceral leishmaniasis (VL is a multifactorial disease, where the host genetics play a significant role in determining the disease outcome. The immunological role of anti-inflammatory cytokine, Interleukin 10 (IL10, has been well-documented in parasite infections and considered as a key regulatory cytokine for VL. Although VL patients in India display high level of IL10 in blood serum, no genetic study has been conducted to assess the VL susceptibility / resistance. Therefore, the aim of this study is to investigate the role of IL10 variations in Indian VL; and to estimate the distribution of disease associated allele in diverse Indian populations.All the exons and exon-intron boundaries of IL10 were sequenced in 184 VL patients along with 172 ethnically matched controls from VL endemic region of India.Our analysis revealed four variations; rs1518111 (2195 A>G, intron, rs1554286 (2607 C>T, intron, rs3024496 (4976 T>C, 3' UTR and rs3024498 (5311 A>G, 3' UTR. Of these, a variant g.5311A is significantly associated with VL (χ2=18.87; p =0.00001. In silico approaches have shown that a putative micro RNA binding site (miR-4321 is lost in rs3024498 mRNA. Further, analysis of the above four variations in 1138 individuals from 34 ethnic populations, representing different social and linguistic groups who are inhabited in different geographical regions of India, showed variable frequency. Interestingly, we have found, majority of the tribal populations have low frequency of VL ('A' of rs3024498; and high frequency of leprosy ('T' of rs1554286, and Behcet's ('A' of rs1518111 associated alleles, whereas these were vice versa in castes. Our findings suggest that majority of tribal populations of India carry the protected / less severe allele against VL, while risk / more severe allele for leprosy and Behcet's disease. This study has potential implications in counseling and management of VL and other infectious diseases.

Temperature profile data collected from XBT casts in the Indian Ocean from the HMAS MELBOURNE and other vessels from 01 January 1991 to 31 December 2001 (NODC Accession 0000714)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from XBT casts from the HMAS MELBOURNE and other vessels in the Indian Ocean from 01 January 1991 to 31 December 2001. Data were...

Probability of causation for radiogenic cancer in Indian population

International Nuclear Information System (INIS)

Bhatia, D.P.; Murthy, M.S.S.

1992-01-01

The National Institute of Health (NIH), USA has generated tables for probability of causation (PC) for various radiogenic cancers for the population of United States, (NIH 1985). These are based on cancer incidence rates derived from data on the Japanese survivors of atomic bomb, followed up to 1977 and T65D dosimetry system. In 1987, Radiation Effects Research Foundation (RERF), a cooperative Japan-United States research organisation published radiation induced risk estimates (absolute and relative) using revised system of dosimetry DS86 and extended follow up of 35 years (Yukiko et al., 1988). In this paper PC has been calculated for the Indian population: i) using absolute risk estimates of RERF and NIH methodology, and ii) using the constant relative risk coefficients (CRR) of RERF. Calculations with new risk coefficients have been extended to the American population and results compared with Indian population. (author). 3 refs., 2 figs

Ethnic Association of Cusp of Carabelli Trait and Shoveling Trait in an Indian Population

Science.gov (United States)

Manju, M; Praveen, R; Umesh, W

2016-01-01

Introduction Variations in the structure of teeth have always been of great interest to the dentist from the scientific as well as practical point of view. Additionally, ever since decades inter trait relationships have been a useful means to categorize populations to which an individual belongs. Aim To determine the association between Cusp of Carabelli and Shoveling Trait in a selected Indian population native of Bangalore city, Karnataka, India. Materials and Methods A cross-sectional study was carried out in 1885 children aged between 7-10 years. Casts of the study subjects were made to study the presence of Cusp of Carabelli of right maxillary permanent molar and shoveling trait of right maxillary permanent central incisor using the Dahlberg’s classification and Hrdliucka’s classification respectively. Linear regression was used to assess the association of cusp of carabelli trait with the tooth dimensions and logistic regression was used to evaluate the association of the carabelli trait with gender and presence/absence of shoveling. Results A 40.5% of subjects had Cusp of Carabelli on first molar and 68.2% had shoveling on upper central incisor. The study revealed positive association between the two traits studied in the population. A significant difference was also found with presence of Cusp of Carabelli and the buccolingual tooth dimension of the maxillary molar (pshoveling trait in the present study population, and this will be valuable in the determination of ethnic origin of an individual. PMID:27135008

FastStats: Health of American Indian or Alaska Native Population

Science.gov (United States)

... Home Health of American Indian or Alaska Native Population Recommend on Facebook Tweet Share Compartir Data are ... Source: Summary Health Statistics Tables for the U.S. Population: National Health Interview Survey, 2015, Table P-1c [ ...

Can genetics help us understand Indian social history?

Science.gov (United States)

Thapar, Romila

2014-06-26

Attempts have been made recently to determine the identity of the so-called "Aryans" as components of the Indian population by using DNA analysis. This is largely to ascertain whether they were indigenous to India or were foreign arrivals. Similar attempts have been made to trace the origins of caste groups on the basis of varna identities and record their distribution. The results so far have been contradictory and, therefore, not of much help to social historians. There are problems in the defining of categories and the techniques of analysis. Aryan is a linguistic and cultural category and not a biological one. Caste groups have no well-defined and invariable boundaries despite marriage codes. Various other categories have been assimilated into particular castes as part of the evolution of social history on the subcontinent. A few examples of these are discussed. The problems with using DNA analysis are also touched on. Copyright © 2014 Cold Spring Harbor Laboratory Press; all rights reserved.

Patellar instability in Indian population: relevance of tibial tuberosity and trochlear groove distance

Directory of Open Access Journals (Sweden)

Kulkarni Sourabh

2016-01-01

Full Text Available Introduction: The tibial tuberosity to trochlear groove (TTTG distance in the western population is extensively studied through various modalities such as X-rays, computerised tomography and magnetic resonance imaging. However, to our knowledge there is very little or no literature support to indicate that TTTG distance has been studied in the Indian population. Methods: We therefore undertook a study to measure the TTTG distance in 100 MRI scans of normal Indian knees. Patients with the following co-morbidities were excluded from the study; ligamentous laxity, patellofemoral instability, mal-alignment and osteoarthritis. We measured TTTG distance on the axial MRI slices using OsiriX software. Results: The mean value for females was found to be 14.07 mm and that for male was found to be 13.34 mm. Our study indicates that the TTTG distance, using MRI scans as measurement modality, in the Indian population is significantly different when compared to the published western data. Discussion: We believe that this study can form the basis for future studies on the relationship between TTTG distance and patellar instability in Indian population.

Genetic spectrum of low density lipoprotein receptor gene variations in South Indian population.

Science.gov (United States)

ArulJothi, K N; Suruthi Abirami, B; Devi, Arikketh

2018-03-01

Low density lipoprotein receptor (LDLR) is a membrane bound receptor maintaining cholesterol homeostasis along with Apolipoprotein B (APOB), Proprotein Convertase Subtilisin/Kexin type 9 (PCSK9) and other genes of lipid metabolism. Any pathogenic variation in these genes alters the function of the receptor and leads to Familial Hypercholesterolemia (FH) and other cardiovascular diseases. This study was aimed at screening the LDLR, APOB and PCSK9 genes in Hypercholesterolemic patients to define the genetic spectrum of FH in Indian population. Familial Hypercholesterolemia patients (n=78) of South Indian Tamil population with LDL cholesterol and Total cholesterol levels above 4.9mmol/l and 7.5mmol/l with family history of Myocardial infarction were involved. DNA was isolated by organic extraction method from blood samples and LDLR, APOB and PCSK9 gene exons were amplified using primers that cover exon-intron boundaries. The amplicons were screened using High Resolution Melt (HRM) Analysis and the screened samples were sequenced after purification. This study reports 20 variations in South Indian population for the first time. In this set of variations 9 are novel variations which are reported for the first time, 11 were reported in other studies also. The in silico analysis for all the variations detected in this study were done to predict the probabilistic effect in pathogenicity of FH. This study adds 9 novel variations and 11 recurrent variations to the spectrum of LDLR gene mutations in Indian population. All these variations are reported for the first time in Indian population. This spectrum of variations was different from the variations of previous Indian reports. Copyright © 2017 Elsevier B.V. All rights reserved.

Biochemical, chemical, physical, and other data collected from the OSYOTR using bottle casts in the East China Sea and Indian Ocean from 11 November 1984 to 04 September 1985 (NODC Accession 0000239)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Biochemistry, physical, chemical, and other data were collected using bottle casts in the East China Sea and Indian Ocean from the OSYOTR from November 11, 1984 to...

Temperature profile and other data collected from XBT casts in Indian Ocean and N / S Pacific Ocean from ICEBIRD and other platforms from 02 January 1993 to 01 January 1994 (NODC Accession 9400207)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and other data were collected using XBT casts from ICEBIRD and other platforms in Indian Ocean and North / South Pacific Ocean. Data were...

Genetic variation among the Golla pastoral caste subdivisions of Andhra Pradesh, India, according to the HLA system.

Science.gov (United States)

Crawford, M H; Reddy, B M; Martinez-Laso, J; Mack, S J; Erlich, H A

2001-09-01

The HLA allele frequency distributions have been characterized for the HLA class I and class II loci of the Golla pastoral caste, from Southeast India, subdivided into the subcastes (Puja, Punugu, Kurava, Pokanati, Karnam, and Doddi). Genetic distances, neighbor-joining, correspondence, and haplotype analyses all indicate that the subcastes exhibit a high haplotype variability and that their genetic substratum may be the result of European-Middle East/Asian admixture with the autochthonous populations. The Karnam subcaste seems to be the one that has undergone a higher degree of admixture, when compared with the other subcastes. The Golla speak an old Indian Dravidian language and should theoretically represent the basic Indian substratum that existed before the postulated "Aryan" invasion.

The Grandest Genetic Experiment Ever Performed on Man? - A Y-Chromosomal Perspective on Genetic Variation in India.

Science.gov (United States)

Carvalho-Silva, Denise R; Tyler-Smith, Chris

2008-05-01

We have analysed Y-chromosomal data from Indian caste, Indian tribal and East Asian populations in order to investigate the impact of the caste system on male genetic variation. We find that variation within populations is lower in India than in East Asia, while variation between populations is overall higher. This observation can be explained by greater subdivision within the Indian population, leading to more genetic drift. However, the effect is most marked in the tribal populations, and the level of variation between caste populations is similar to the level between Chinese populations. The caste system has therefore had a detectable impact on Y-chromosomal variation, but this has been less strong than the influence of the tribal system, perhaps because of larger population sizes in the castes, more gene flow or a shorter period of time.

Temperature profile and water depth data collected from USS MERRILL using BT and XBT casts in the Indian Ocean and other seas from 17 May 1988 to 01 June 1988 (NODC Accession 8800181)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and water depth data were collected using BT and XBT casts from the USS MERRILL in Arabian Sea, Indian Ocean, Gulf of Oman, Laccadive Sea, and...

Prevalence of α(+)-Thalassemia in the Scheduled Tribe and Scheduled Caste Populations of Damoh District in Madhya Pradesh, Central India.

Science.gov (United States)

Singh, Mendi P S S; Gupta, Rasik B; Yadav, Rajiv; Sharma, Ravendra K; Shanmugam, Rajasubramaniam

2016-08-01

This study was carried out to ascertain the allelic frequency of α(+)-thalassemia (α(+)-thal) in Scheduled caste and scheduled tribe populations of the Damoh district of Madhya Pradesh, India. Random blood samples of Scheduled tribe (267) and Scheduled caste (168), considering the family as a sampling unit, were analyzed for the presence of the -α(3.7) (rightward) (NG_000006.1: g.34164_37967del3804) and -α(4.2) (leftward) (AF221717) deletions. α(+)-Thal was significantly higher in the Scheduled tribals (77.9%) as compared to the scheduled caste population (9.0%). About 58.0% scheduled tribals carried at least one chromosome with the -α(3.7) deletion and 20.0% scheduled tribals carried the -α(4.2) deletion. Frequency for the -α(3.7) allele was 0.487 in the scheduled tribal populations in comparison to 0.021 in scheduled castes. Allelic frequency for -α(4.2) was 0.103 and 0.024, respectively, in the above communities. No Hardy-Weinberg equilibrium for α-thal gene (p population, indicating the presence of selection pressures in favor of α-thal mutation and adaptation.

Temperature profile and water depth data collected from USS BARBEY using BT and XBT casts in the Indian ocean and other seas from 07 January 1989 to 31 January 1989 (NODC Accession 8900034)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and water depth data were collected using BT and XBT casts from the USS BARBEY in the Indian Ocean, South China Sea, Burma Sea, and Malacca of...

Temperature profile and water depth data collected from USS Merrill using BT and XBT casts in the Indian Ocean and other seas from 1988-03-01 to 1988-03-29 (NODC Accession 8800110)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and water depth data were collected using BT and XBT casts from the USS MERRILL in the Arabian Sea, Gulf of Oman, and Indian Ocean. Data were...

Temperature profile and water depth data collected from USS MERRILL using BT and XBT casts in the Indian Ocean and other seas from 05 April 1988 to 11 April 1988 (NODC Accession 8800140)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and water depth data were collected using BT and XBT casts from the USS MERRILL in the Indian Ocean, Arabian Sea, and Gulf of Oman. Data were...

SULT1A1 copy number variation: ethnic distribution analysis in an Indian population.

Science.gov (United States)

Almal, Suhani; Padh, Harish

2017-11-01

Cytosolic sulfotransferases (SULTs) are phase II detoxification enzymes involved in metabolism of numerous xenobiotics, drugs and endogenous compounds. Interindividual variation in sulfonation capacity is important for determining an individual's response to xenobiotics. SNPs in SULTs, mainly SULT1A1 have been associated with cancer risk and also with response to therapeutic agents. Copy number variation (CNVs) in SULT1A1 is found to be correlated with altered enzyme activity. This short report primarily focuses on CNV in SULT1A1 and its distribution among different ethnic populations around the globe. Frequency distribution of SULT1A1 copy number (CN) in 157 healthy Indian individuals was assessed using florescent-based quantitative PCR assay. A range of 1 to >4 copies, with a frequency of SULT1A1 CN =2 (64.9%) the highest, was observed in our (Indian) population. Upon comparative analysis of frequency distribution of SULT1A1 CN among diverse population groups, a statistically significant difference was observed between Indians (our data) and African-American (AA) (p = 0.0001) and South African (Tswana) (p populations. Distribution of CNV in the Indian population was found to be similar to that in European-derived populations of American and Japanese. CNV of SULT1A1 varies significantly among world populations and may be one of the determinants of health and diseases.

Prevalence and distribution of selected developmental dental anomalies in an Indian population.

Science.gov (United States)

Gupta, Saurabh K; Saxena, Payal; Jain, Sandhya; Jain, Deshraj

2011-06-01

The purpose of this study was to determine the prevalence of developmental dental anomalies in an Indian population and to statistically analyze the distribution of these anomalies. The study was based on clinical examination, evaluation of dental casts, and panoramic radiographs of 1123 Indian subjects (572 males, 551 females), who visited the outpatient clinic at Government Dental College, Indore between November 2009 and September 2010, after obtaining their informed consent. These patients were examined for the following developmental dental anomalies: shape anomalies (microdontia, talon cusp, dens evaginatus, fusion, taurodontism), number anomalies (hypodontia, oligodontia, anodontia), structural anomalies (amelogenesis imperfecta, dentinogenesis imperfecta) and positional anomalies (ectopic eruption, rotation, impaction). The percentages of these anomalies were assessed for the whole group and compared using statistical analysis. Among the 1123 subjects, a total of 385 individuals (34.28%) presented with the selected developmental dental anomalies. The distribution by sex was 197 males (34.44%), and 188 females (34.06%). Out of the total 1123 individuals, 351 (31.26%) exhibited at least one anomaly, 28 (2.49 %) showed two anomalies and 6 (0.53%) displayed more than two anomalies. P values indicated that the dental anomalies were statistically independent of sex. On intergroup comparison, positional anomalies were significantly most prevalent (P dental anomaly was rotation (10.24%), followed by ectopic eruption (7.93%). The next common group was number anomalies. The most common number anomaly was hypodontia (4.19%), which had a higher frequency than hyperdontia (2.40%). Analyzing the next prevalent group of shape anomalies, microdontia (2.58%) was found to be the most common, followed by taurodontism (2.49%), dens evaginatus (2.40%) and talon cusp (0.97%). Dentinogenesis imperfecta (0.09%) was the rarest, followed by amelogenesis imperfecta (0.27%) and fusion

Temperature profile and water depth data collected from USS BARBEY using BT and XBT casts in the Indian Ocean and other seas from 02 December 1988 to 28 December 1988 (NODC Accession 8900015)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and water depth data were collected using BT and XBT casts from the USS BARBEY in the Indian Ocean, Arabian Sea, Gulf of Oman, Gulf of Iran, and...

Correlates of the desired family size among Indian communities.

Science.gov (United States)

Joshi, N V; Gadgil, M; Patil, S

1996-06-25

The People of India database of the Anthropological Survey of India documents 631 cultural, ecological, and economic traits of the 4635 communities to which the entire Indian population is assigned. Focusing on 1342 communities of South India, we looked for correlates of low (1 or 2 children) and high (4 or more children) desired family size (DFS) reported as the norm for any given community by key informants. We found 10 cultural and 18 economic traits to be significantly correlated to high DFS and 21 cultural and 9 economic traits to low DFS. The economic traits so identified are compatible with high family size being desired by parents who have little capability of investing in quality of offspring, but whose children contribute economically from an early age. In contrast, communities desiring low family size are part of the modern intensive agriculture/organized industry/services sector and invest heavily in educating their children. A composite index based on 27 economic traits (CEI) has a high predictive value with respect to the DFS for the entire set of 4635 Indian communities. The 31 cultural traits highly correlated to high or low DFS constitute 5 clusters that can be identified as characterizing scheduled tribes, scheduled castes, rural and landless lower castes, urban upper castes, and Moslems. Whereas economic traits have similar influence on DFS within each of these ethnic categories, Moslems demonstrate a significantly higher DFS for lower values of CEI.

Consanguineous marriages and matrimonial distance: a study among three South Indian caste groups.

Science.gov (United States)

Reddy, P G

1988-12-01

Reddy studies consanguineous marriages and matrimonial distance in 3 castes of Nellore district, Andhra Pradesh, South India. The castes include the well-to-do agricultural caste, the Desuri Kapu; the 2nd, artisan caste in the middle of the hierarchy, the Devanga; and the third caste at the bottom of the social ladder, the Mala. During field work conducted in 1978-1979, prominent elders of the villages were approached; information on the consanguinity of marriage and matrimonial distance was gathered through intensive interviews of both men and women from all the households of the 3 castes. Among the total of 979 marriages, 28.9% occurred within the village, the proportion of intra-village marriages being significantly higher in Nellore taluk than in Sullurpet. The 3 castes overall show little difference in the incidence of intra-village marriages, but there is some within caste regional variation in the incidence of intra-village marriages, the Devanga showing a significantly higher incidence in Nellore than in Sullurpet. Intra-village marriages are more common among consanguineous couples (41.5%) than among non-consanguineous (18.3%), a highly significant excess in each of the caste groups. In short, Reddy concludes that intra-village marriages are more common among consanguineous couples than non-consanguineous, and mean matrimonial distance is also lower.

MACF1 gene variant rs2296172 is associated with type 2 diabetes susceptibility in the Bania population group of Punjab - India

Directory of Open Access Journals (Sweden)

Varun Sharma

2017-10-01

Full Text Available Microtubule Actin Cross linking Factor 1 (MACF1 gene variant rs2296172 has been associated with Type 2 Diabetes (T2D. However, this variant has never been evaluated as such in Indian populations. We replicated this variant in pooled population of Northwest India and specifically in an endogamous caste group, Bania  of Punjab, India. We genotyped variant rs2296172 by Taqman allele discrimination assay in 651 T2D patients and in 568 healthy controls from Northwest India. The association of the SNP with T2D was evaluated by case - control association study design. The SNP rs2296172 of MACF1 was found to be significantly associated with T2D with p value = 0.009 in Northwest Indian population but allelic distribution was observed to be deviated from Hardy-Weinberg equilibrium (HWE. Assuming population stratification the most plausible cause, we further evaluated the samples belonging to Bania caste group from Punjab, India. We observed significant association of this SNP with T2D with OR = 1.71 (1.03-2.83 at 95%CI, (p =0.03 and sample set following HWE. MACF1 variant rs2296172 was found to be associated with T2D in endogamous ethnic population group (Bania of Punjab, India. Deviation from Hardy-Weinberg equilibrium in the pooled population group from Northwest India, underlines that Indian population sub structure exists and may have implications in association studies. Thus, ideal case - control association study design in Indian populations is to evaluate endogamous population groups rather than the conventional practice of pooling samples based on geography or linguistic affinities only.

Genetic diversity in India and the inference of Eurasian population expansion.

Science.gov (United States)

Xing, Jinchuan; Watkins, W Scott; Hu, Ya; Huff, Chad D; Sabo, Aniko; Muzny, Donna M; Bamshad, Michael J; Gibbs, Richard A; Jorde, Lynn B; Yu, Fuli

2010-01-01

Genetic studies of populations from the Indian subcontinent are of great interest because of India's large population size, complex demographic history, and unique social structure. Despite recent large-scale efforts in discovering human genetic variation, India's vast reservoir of genetic diversity remains largely unexplored. To analyze an unbiased sample of genetic diversity in India and to investigate human migration history in Eurasia, we resequenced one 100-kb ENCODE region in 92 samples collected from three castes and one tribal group from the state of Andhra Pradesh in south India. Analyses of the four Indian populations, along with eight HapMap populations (692 samples), showed that 30% of all SNPs in the south Indian populations are not seen in HapMap populations. Several Indian populations, such as the Yadava, Mala/Madiga, and Irula, have nucleotide diversity levels as high as those of HapMap African populations. Using unbiased allele-frequency spectra, we investigated the expansion of human populations into Eurasia. The divergence time estimates among the major population groups suggest that Eurasian populations in this study diverged from Africans during the same time frame (approximately 90 to 110 thousand years ago). The divergence among different Eurasian populations occurred more than 40,000 years after their divergence with Africans. Our results show that Indian populations harbor large amounts of genetic variation that have not been surveyed adequately by public SNP discovery efforts. Our data also support a delayed expansion hypothesis in which an ancestral Eurasian founding population remained isolated long after the out-of-Africa diaspora, before expanding throughout Eurasia. © 2010 Xing et al.; licensee BioMed Central Ltd.

Leading Indian Business-Groups

Directory of Open Access Journals (Sweden)

Maria Alexandrovna Vorobyeva

2016-01-01

Full Text Available The goal of this paper is to investigate the evolution of the leading Indian business-groups under the conditions of economical liberalization. It is shown that the role of modern business-groups in the Indian economy is determined by their high rate in the gross domestic product (GDP, huge overall actives, substantial pert in the e[port of goods and services, as well as by their activities in modern branch structure formatting, and developing labor-intensive and high-tech branches. They strongly influence upon economical national strategies, they became a locomotive of internationalization and of transnationalization of India, the basis of the external economy factor system, the promoters of Indian "economical miracle" on the world scene, and the dynamical segment of economical and social development of modern India. The tendencies of the development of the leading Indian business groups are: gradual concentration of production in few clue sectors, "horizontal" structure, incorporation of the enterprises into joint-stock structure, attraction of hired top-managers and transnationaliziation. But against this background the leading Indian business-groups keep main traditional peculiarities: they mostly still belong to the families of their founders, even today they observe caste or communal relations which are the basis of their non-formal backbone tides, they still remain highly diversificated structures with weak interrelations. Specific national ambivalence and combination of traditions and innovations of the leading Indian business-groups provide their high vitality and stability in the controversial, multiform, overloaded with caste and confessional remains Indian reality. We conclude that in contrast to the dominant opinion transformation of these groups into multisectoral corporations of the western type is far from completion, and in the nearest perspective they will still possess all their peculiarities and incident social and economical

Hippocampal volumetry: Normative data in the Indian population.

Science.gov (United States)

Mohandas, Aravind Narayan; Bharath, Rose Dawn; Prathyusha, Parthipulli Vasuki; Gupta, Arun K

2014-07-01

Mesial temporal sclerosis (MTS) is the most common cause of temporal lobe epilepsy. Quantitative analysis of the hippocampus using volumetry is commonly being used in the diagnosis of MTS and is being used as a marker in prognostication of seizure control. Although normative data for hippocampal volume (HV) is available for the western population, no such data is available for the Indian population. The aim of the study was to establish normative data for HV for the Indian population, which can aid in the accurate diagnosis of MTS. Magnetic resonance imaging (MRI) scans of 200 healthy volunteers were acquired using a 3 Tesla (3T) MRI scanner. Manual segmentation and volumetry was done using Siemens Syngo software. The data was analyzed using two tailed t-test to detect associations between HV and age, gender, and education. The data so obtained was also correlated with the data available from the rest of the world. A mean HV of 2.411 cm(3) (standard deviation -0.299) was found in the study, which was significantly smaller when compared to the data from the western population. The right hippocampus was larger than the left, with a mean volume of 2.424 cm(3) and 2.398 cm(3), respectively. HV was detected to be significantly higher in males. No association was found between HV and age and education. The values obtained in this study may be adopted as a standard in the evaluation of patients with intractable epilepsy.

Unraveling Brazilian Indian population prostate good health: clinical, anthropometric and genetic features

Directory of Open Access Journals (Sweden)

Mario M. de Lima Junior

2015-04-01

Full Text Available Purpose To compare dietary, lifestyle, clinical, anthropometric, genetic and prostatic features of Brazilian Indians and non-Indians (Amazon. Methods 315 men, 228 Indians and 89 non-Indians, ≥40 years old were submitted to digital rectal examination, serum prostate specific antigen (PSA, testosterone, TP53 and GSTP1 genotyping, anthropometric, lifestyle, dietary, personal and familial medical history. Prostatic symptoms were evaluated with the International Prostate Symptom Score (IPSS. Results Macuxis and Yanomamis represented 43.6% and 14.5% of Indians respectively who spontaneously referred no prostate symptoms. Mean IPSS was 7, range 3-19, with only 15% of moderate symptoms (score 8-19; Mean age was 54.7 years, waist circumference 86.6 cm, BMI 23.9 kg/m2. Yanomamis presented both lower BMI (21.4 versus 24.8 and 23.3, p=0,001 and prostate volume than Macuxis and “other ethnic groups” (15 versus 20, p=0.001. Testosterone (414 versus 502 and 512, p=0.207 and PSA (0.48 versus 0.6 and 0.41, p=0.349 were similar with progressive PSA increase with aging. Val/Val correlated with lower PSA (p=0.0361. Indians compared to control population presented: - TP53 super representation of Arg/Arg haplotype, 74.5% versus 42.5%, p<0.0001. -GSTP1 Ile/Ile 35.3% versus 60.9%; Ile/Val 45.9% versus 28.7%; Val/Val 18.8% versus 10.3%; p=0.0003. Conclusions Observed specific dietary, lifestyle, anthropometric and genetic profile for TP53 and GSTP1 may contribute to Brazilian Indian population prostate good health.

Unraveling Brazilian Indian population prostate good health: clinical, anthropometric and genetic features

Science.gov (United States)

de Lima, Mario M.; Reis, Leonardo O.; Ferreira, Ubirajara; Cardoso, Ulieme Oliveira; Barbieri, Raquel Bueno; de Mendonça, Gustavo B.; Ward, Laura S.

2015-01-01

Purpose To compare dietary, lifestyle, clinical, anthropometric, genetic and prostatic features of Brazilian Indians and non-Indians (Amazon). Methods 315 men, 228 Indians and 89 non-Indians, ≥40 years old were submitted to digital rectal examination, serum prostate specific antigen (PSA), testosterone, TP53 and GSTP1 genotyping, anthropometric, lifestyle, dietary, personal and familial medical history. Prostatic symptoms were evaluated with the International Prostate Symptom Score (IPSS). Results Macuxis and Yanomamis represented 43.6% and 14.5% of Indians respectively who spontaneously referred no prostate symptoms. Mean IPSS was 7, range 3-19, with only 15% of moderate symptoms (score 8-19); Mean age was 54.7 years, waist circumference 86.6 cm, BMI 23.9 kg/m2. Yanomamis presented both lower BMI (21.4 versus 24.8 and 23.3, p=0,001) and prostate volume than Macuxis and “other ethnic groups” (15 versus 20, p=0.001). Testosterone (414 versus 502 and 512, p=0.207) and PSA (0.48 versus 0.6 and 0.41, p=0.349) were similar with progressive PSA increase with aging. Val/Val correlated with lower PSA (p=0.0361). Indians compared to control population presented: - TP53 super representation of Arg/Arg haplotype, 74.5% versus 42.5%, p<0.0001. -GSTP1 Ile/Ile 35.3% versus 60.9%; Ile/Val 45.9% versus 28.7%; Val/Val 18.8% versus 10.3%; p=0.0003. Conclusions Observed specific dietary, lifestyle, anthropometric and genetic profile for TP53 and GSTP1 may contribute to Brazilian Indian population prostate good health. PMID:26005978

Temperature profile and water depth data collected from USS HENRY B. WILSON using BT and XBT casts in the Indian Ocean and other seas from 22 October 1986 to 26 November 1986 (NODC Accession 8800183)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and water depth data were collected using BT and XBT casts from the USS HENRY B. WILSON in the Indian Ocean, Gulf of Oman, Gulf of Iran, and...

Clinical cavitation and radiographic lesion depth in proximal surfaces in an Indian population

DEFF Research Database (Denmark)

Sansare, Kaustubh; Raghav, Mamta; Sontakke, Subodeh

2014-01-01

the developing world. Materials and methods. Relationship between clinical cavitation and radiographic caries lesion depth in proximal surfaces in an Indian population was assessed. Proximal surfaces (n = 126) without restorations were examined on bitewing radiographs in patients with suspected caries and lesion......Abstract Objectives. To assess the relationship between clinical cavitation and radiographic caries lesion depth in proximal surfaces of permanent posterior teeth in an Indian population. This study also assessed the clinical feasibility of applying 'western guidelines' to this population from...... to the radiographic findings of lesion depth, 80-100% of the lesions observed in outer dentine would lead to a false (non-operative) treatment decision. Conclusions. Radiographic shallow carious lesions were often cavitated in this population. The threshold for cavitation in this study population is suggested...

Temperature and salinity profile data collected from CTD casts by the National Institute of Oceanography (NIO), India, in the Bay of Bengal and Indian Ocean from October 01, 1983 to August 05, 1996 (NODC Accession 0055417)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical data were collected from CTD casts from the Bay of Bengal and Indian Ocean. Data were collected from October 1983 to August 1996. Data were collected and...

Why, and how, is India protecting the caste system at the national and international arena?

OpenAIRE

Gravaas, Gunnhild

2015-01-01

Caste is a hierarchical system, distinguishing people’s status by determining one’s purity and pollution. Indian structure of society has been formed by a Hindu conviction through generations, institutionalised through culture and religious structures. This makes caste difficult to change. The problem statement in this study is: why, and how, is India protecting the caste system at the national and international arena? The problem statement is studied from both a national and internatio...

Incidence and etiology of unplanned cast changes for fractures in the pediatric population.

Science.gov (United States)

DiPaola, Matthew J; Abzug, Joshua M; Pizzutillo, Peter D; Herman, Martin J

2014-09-01

The majority of pediatric fractures are treated in casts due to the child's ability to heal rapidly and remodel. Unplanned cast changes are a time and economic burden with potentially adverse effects on fracture management. The purpose of this study is to document the incidence, etiology, and complications related to unplanned cast changes. A prospective study was conducted over a 6-month period to determine the incidence of unplanned cast changes. All casts applied were nonwaterproof. Data collected include the reason for cast placement, type of cast placed, duration of wear before the unplanned change, reason for the unplanned change, experience level of the original cast applicator, and cast-related complications. A total of 1135 casts were placed with 58% placed by a resident, 38% by a cast technician, 2% by a physician's assistant, and 2% by an attending physician. Sixty casts (5.3%) required an unplanned change including 19 short-arm casts, 18 short-leg casts, 17 long-arm casts, 4 thumb spica casts, and 2 long-leg casts. The average duration from cast application until the unplanned change was 13 days. Twenty-eight (47%) were changed for wetness, 20 (33%) for wear/breakage, 2 (3%) for skin irritation, and 10 (17%) for other reasons including objects in the cast and patient self-removal. Two patients had superficial skin infections requiring oral antibiotics. No fracture reductions were lost secondary to an unplanned cast change. The need for an unplanned cast change did not correlate with the level of experience of the applicator. Most unplanned cast changes were the result of patient nonadherence to instructions and not related to cast application technique. Improved patient and family education regarding cast care may reduce the frequency of unplanned cast changes, thus reducing an economic and time burden on the health care system. Level II--prognostic study.

“De-Casteing” India: How Dalit Women’s Rights Civil Society Organizations Tackle Caste Based Socio-Political & Religio-Cultural Challenges

OpenAIRE

Boateng, Godwin Festival; Matadamas, Erika; Sharma, Reesha; Winkler, Caroline

2014-01-01

Untouchability practices and caste based discrimination and injustices are under yet another siege after Ambedkar. In the past 50 years, India has seen tremendous mobilization by the lower caste members, specifically, vibrant women’s movements challenging the Indian caste society with the view of securing social change and abating caste based discrimination, violence and mistreatments. However, just like the era of Ambedkar, the anti-caste movements of today have the socio-political and relig...

Aldehyde dehydrogenase polymorphism in North American, South American, and Mexican Indian populations.

Science.gov (United States)

Goedde, H W; Agarwal, D P; Harada, S; Rothhammer, F; Whittaker, J O; Lisker, R

1986-01-01

While about 40% of the South American Indian populations (Atacameños, Mapuche, Shuara) were found to be deficient in aldehyde dehydrogenase isozyme I (ALDH2 or E2), preliminary investigations showed very low incidence of isozyme deficiency among North American natives (Sioux, Navajo) and Mexican Indians (mestizo). Possible implications of such trait differences on cross-cultural behavioral response to alcohol drinking are discussed. PMID:3953578

Prevalence of dental anomalies in Indian population

OpenAIRE

Santosh, Patil; Bharati, Doni; Sumita, Kaswan; Farzan, Rahman

2013-01-01

Objectives: Developmental anomalies of the dentition are not infrequently observed by the dental practitioner. The aim of the present study was to determine the prevalence of dental anomalies in the Indian population. Study Design: A retrospective study of 4133 panoramic radiographs of patients, who attended the Department of Oral Medicine and Radiology, Jodhpur Dental College General Hospital between September 2008 to December 2012 was done. The ages of the patients ranged from 13 to 38 year...

Drug‑induced Stevens–Johnson Syndrome in Indian Population: A ...

African Journals Online (AJOL)

2017-09-14

Sep 14, 2017 ... Drug-induced Stevens–Johnson syndrome in Indian population: A multicentric retrospective analysis. Niger J Clin Pract 2017;20:978-83. This is an open access article distributed under the terms of the Creative Commons. Attribution-Non Commercial-Share Alike 3.0 License, which allows others to remix,.

Temperature profile and water depth data collected from SEDCO / BP 471 using BT and XBT casts in the East Indian Archipelago and TOGA Area - Pacific Ocean from 14 November 1988 to 20 December 1988 (NODC Accession 8900043)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and water depth data were collected using BT and XBT casts from the SEDCO / BP 471 in the East Indian Archipelago. and TOGA Area - Pacific Ocean....

Temperature profile data from STD/CTD casts from the MELVILLE from the Indian Ocean for the International Decade of Ocean Exploration / Geochemical Ocean Section Study (IDOE/GEOSECS) project, 06 December 1977 to 21 April 1978 (NODC Accession 8200055)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity profile data were collected using STD/CTD casts from MELVILLE from the Indian Ocean from December 6, 1977 to April 21, 1978. Data were...

Extensive copy number variations in admixed Indian population of African ancestry: potential involvement in adaptation.

Science.gov (United States)

Narang, Ankita; Jha, Pankaj; Kumar, Dhirendra; Kutum, Rintu; Mondal, Anupam Kumar; Dash, Debasis; Mukerji, Mitali

2014-11-13

Admixture mapping has been enormously resourceful in identifying genetic variations linked to phenotypes, adaptation, and diseases. In this study through analysis of copy number variable regions (CNVRs), we report extensive restructuring in the genomes of the recently admixed African-Indian population (OG-W-IP) that inhabits a highly saline environment in Western India. The study included subjects from OG-W-IP (OG), five different Indian and three HapMap populations that were genotyped using Affymetrix version 6.0 arrays. Copy number variations (CNVs) detected using Birdsuite were used to define CNVRs. Population structure with respect to CNVRs was delineated using random forest approach. OG genomes have a surprising excess of CNVs in comparison to other studied populations. Individual ancestry proportions computed using STRUCTURE also reveals a unique genetic component in OGs. Population structure analysis with CNV genotypes indicates OG to be distant from both the African and Indian ancestral populations. Interestingly, it shows genetic proximity with respect to CNVs to only one Indian population IE-W-LP4, which also happens to reside in the same geographical region. We also observe a significant enrichment of molecular processes related to ion binding and receptor activity in genes encompassing OG-specific CNVRs. Our results suggest that retention of CNVRs from ancestral natives and de novo acquisition of CNVRs could accelerate the process of adaptation especially in an extreme environment. Additionally, this population would be enormously useful for dissecting genes and delineating the involvement of CNVs in salt adaptation. © The Author(s) 2014. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

Impact of classical risk factors of type 2 diabetes among Asian Indian, Chinese and Japanese populations.

Science.gov (United States)

He, L; Tuomilehto, J; Qiao, Q; Söderberg, S; Daimon, M; Chambers, J; Pitkäniemi, J

2015-11-01

This review investigated the population impact of major modifiable type 2 diabetes (T2D) risk factors, with special focus on native Asian Indians, to estimate population attributable risks (PARs) and compare them with estimates from Chinese and Japanese populations. Information was obtained on risk factors in 21,041 Asian Indian, 17,774 Chinese and 17,986 Japanese populations from multiple, large, cross-sectional studies (the DECODA project) of T2D. Crude and adjusted PARs were estimated for the major T2D risk factors. Age had the highest crude and adjusted PARs among Asian Indians and Chinese in contrast to waist-hip ratio among Japanese. After adjusting for age, the PAR for body mass index (BMI) in Asian Indians (41.4% [95% CI: 37.2%; 45.4%]) was second only to triglycerides (46.4% [95% CI: 39.5%; 52.8%]) compared with 35.8% [95% CI: 29.9%; 41.4%] in Japanese and 38.4% [95% CI: 33.5%; 43.2%] in Chinese people. The PAR for BMI adjusted for age, LDL and triglycerides (39.7% [95% CI: 31.6%; 47.2%]) was higher than for any other factor in Asian Indians, and was much higher than in the Chinese (16.8% [95% CI: 3.0%; 30.9%]) and Japanese (30.4% [95% CI: 17.5%; 42.2%]) populations. This review provides estimates of the association between major risk factors and prevalences of T2D among Asian populations by examining their PARs from large population-based samples. From a public-health point of view, the importance of BMI in Asian Indians is especially highlighted in comparison to the other Asian populations. Given these results and other recent findings on the causality link between BMI and T2D, it can be postulated that obesity may be involved in the aetiology of T2D through interaction with ethnic-specific genetic factors, although ethnicity itself is not a direct risk factor for T2D as people of all ethnic backgrounds develop diabetes. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Prevalence of dental anomalies in Indian population.

Science.gov (United States)

Patil, Santosh; Doni, Bharati; Kaswan, Sumita; Rahman, Farzan

2013-10-01

Developmental anomalies of the dentition are not infrequently observed by the dental practitioner. The aim of the present study was to determine the prevalence of dental anomalies in the Indian population. A retrospective study of 4133 panoramic radiographs of patients, who attended the Department of Oral Medicine and Radiology, Jodhpur Dental College General Hospital between September 2008 to December 2012 was done. The ages of the patients ranged from 13 to 38 years with a mean age of 21.8 years. The orthopantomographs (OPGs) and dental records were examined for any unusual finding such as congenitally missing teeth, impactions, ectopic eruption, supernumerary teeth, odontoma, dilacerations, taurodontism, dens in dente, germination and fusion, among others. 1519 (36.7%) patients had at least one dental anomaly. The congenitally missing teeth 673 (16.3%) had the highest prevalence, followed by impacted teeth 641 (15.5%), supernumerary teeth 51 (1.2%) and microdontia 41 (1.0%). Other anomalies were found at lower prevalence ranging from transposition 7 (0.1%) to ectopic eruption 30 (0.7%). The most prevalent anomaly in the Indian population was congenitally missing teeth (16.3%), and the second frequent anomaly was impacted teeth (15.5%), whereas, macrodontia, odontoma and transposition were the least frequent anomalies, with a prevalence of 0.2%, 0.2% and 0.1% respectively. While the overall prevalence of these anomalies may be low, the early diagnosis is imperative for the patient management and treatment planning. Key words:Dental anomaly, prevalence, panoramic radiography.

Genetic study of Dravidian castes of Tamil Nadu

Indian Academy of Sciences (India)

Table 1a. Dravidian caste populations, locations of sampling, population sample size (N) and anthropological information. Caste (code). Location of sampling. N. Anthropological information. Kongu Vellala Gounder (KG) Karur, Erode. 50. Middle class: agriculture and business. Kallar (KL). Thanjavur, Madurai. 54.

Studies of the anatomical, physiological and metabolic characteristics of the Indian population for setting up a Reference Man

International Nuclear Information System (INIS)

Dang, H.S.; Jaiswal, D.D. Parameswaran, M.; Krishnamony, S.

1998-01-01

This paper presents Indian data on various human characteristics such as physical, anatomical, physiological and metabolic parameters. The knowledge of these parameters is required for dosimetric purposes and for developing, secondary radiation standards for occupational workers and the general public. The data reported are for the adult population, as well as for the younger population at the ages newborn, and 1, 5, 10 and 15 years. On the basis of the collection, collation and generation of the above data, the characteristics of the Reference Indian Man are proposed. The comparison of Indian data with that for ICRP Reference Man (representing the Caucasian population) shows that most of the physical, physiological and anatomical characteristics of the Indian population are smaller. The weights of a few smaller organs such as thyroid, testes, etc. are comparable and the daily intake of drinking water, the sweat rate and urine excretion rate etc. are higher than those for ICRP Reference man. (author)

Ecological organization of Indian society.

Science.gov (United States)

Gadgil, M

1991-01-01

Some of the factors involved in securing the well being of an Indian rural population in a sustainable and environmentally sound fashion are discussed. Population pressure on the land and declining productivity threaten the balance between man and nature. The options are to provide outside technological inputs and/or to empower the rural population who may be able to provide an intimate knowledge of the local environment and must be organized and motivated to value and protect their resource base. Attention in paid to the Indian caste system, resource use diversification, group size and range, group dynamics, elites and the ecosystem, the drain on rural resources, the iron triangle of beneficiaries of subsidies, of administrators of subsidies, and of politicians, and the growing strife. The Indian caste system is differentiated by its subgroups which maintain communication within the subgroup, and resource access is determined by an individual's affiliation with the subgroup. It is not a smooth continuum between subgroups. Inequalities in resource access can create social tensions and/or partitioning of resources. The example is given of the subgroups Gavlis and Kunbis, in the Western Ghats in Pune district of Maharashtra, where exchanges are made for livestock or surplus grain, and the multicaste system of 40 subgroups in Uttara Kannada, with occupations specific to each subgroup. In order to function effectively as a subgroup the numbers must be limited or splinter groups develop. Several estimates of possible ranges are given, i.e., an upper limit of 10,000 or the equivalent of a subcaste and 10-20 endogenous groups/larger village with an area of 1000 km. Mergers and group splits are described among the Gavlis in Western Ghat and Tirumal Nadivallas and settlers of the Andaman Islands. Historically, communities were self-sufficient and surrounded elite communities; they had their own self-government and organized local resources for sustainable use, even though

Time Trends in Breast Cancer Among Indian Women Population: An Analysis of Population Based Cancer Registry Data.

Science.gov (United States)

Chaturvedi, Meesha; Vaitheeswaran, K; Satishkumar, K; Das, Priyanka; Stephen, S; Nandakumar, A

2015-12-01

The trends observed in cancer breast among Indian women are an indication of effect of changing lifestyle in population. To draw an appropriate inference regarding the trends of a particular type of cancer in a country, it is imperative to glance at the reliable data collected by Population Based Cancer Registries over a period of time. To give an insight of changing trends of breast cancer which have taken place over a period of time among women in Cancer Registries of India. Breast Cancer trends for invasive breast cancer in women in Indian Registries have varied during the selected period. Occurrence of breast cancers has also shown geographical variation in India. This data was collected by means of a 'Standard Core Proforma' designed by NCRP conforming to the data fields as suggested by International norms. The Proforma was filled by trained Registry workers based on interview/ hospital medical records/ supplementing data by inputs from treating surgeons/radiation oncologists/involved physicians/pathologists. The contents of the Proforma are entered into specifically created software and transmitted electronically to the coordinating center at Bangalore. The registries contributing to more number of years of data are called as older registries, while other recently established registries are called newer registries. While there has been an increase recorded in breast cancer in most of the registries, some of them have recorded an insignificant increase. Comparison of Age Adjusted Rates (AARs) among Indian Registries has been carried out after which trends observed in populations covered by Indian Registries are depicted. A variation in broad age groups of females and the proneness of females developing breast cancer over the period 1982 to 2010 has been shown. Comparisons of Indian registries with International counterparts have also been carried out. There are marked changes in incidence rates of cancer breast which have occurred in respective registries in a

Mitochondrial DNA history of Sri Lankan ethnic people: their relations within the island and with the Indian subcontinental populations.

Science.gov (United States)

Ranaweera, Lanka; Kaewsutthi, Supannee; Win Tun, Aung; Boonyarit, Hathaichanoke; Poolsuwan, Samerchai; Lertrit, Patcharee

2014-01-01

Located only a short distance off the southernmost shore of the Greater Indian subcontinent, the island of Sri Lanka has long been inhabited by various ethnic populations. Mainly comprising the Vedda, Sinhalese (Up- and Low-country) and Tamil (Sri Lankan and Indian); their history of settlements on the island and the biological relationships among them have remained obscure. It has been hypothesized that the Vedda was probably the earliest inhabitants of the area, followed by Sinhalese and Tamil from the Indian mainland. This study, in which 271 individuals, representing the Sri Lankan ethnic populations mentioned, were typed for their mitochondrial DNA (mtDNA) hypervariable segment 1 (HVS-1) and part of hypervariable segment 2 (HVS-2), provides implications for their settlement history on the island. From the phylogenetic, principal coordinate and analysis of molecular variance results, the Vedda occupied a position separated from all other ethnic people of the island, who formed relatively close affiliations among themselves, suggesting a separate origin of the former. The haplotypes and analysis of molecular variance revealed that Vedda people's mitochondrial sequences are more related to the Sinhalese and Sri Lankan Tamils' than the Indian Tamils' sequences. MtDNA haplogroup analysis revealed that several West Eurasian haplogroups as well as Indian-specific mtDNA clades were found amongst the Sri Lankan populations. Through a comparison with the mtDNA HVS-1 and part of HVS-2 of Indian database, both Tamils and Sinhalese clusters were affiliated with Indian subcontinent populations than Vedda people who are believed to be the native population of the island of Sri Lanka.

Are the Motivational Effects of Autonomy-Supportive Conditions Universal? Contrasting Results Among Indians and Americans.

Science.gov (United States)

Tripathi, Ritu; Cervone, Daniel; Savani, Krishna

2018-04-01

In Western theories of motivation, autonomy is conceived as a universal motivator of human action; enhancing autonomy is expected to increase motivation panculturally. Using a novel online experimental paradigm that afforded a behavioral measure of motivation, we found that, contrary to this prevailing view, autonomy cues affect motivation differently among American and Indian corporate professionals. Autonomy-supportive instructions increased motivation among Americans but decreased motivation among Indians. The motivational Cue × Culture interaction was extraordinarily large; the populations exhibited little statistical overlap. A second study suggested that this interaction reflects culturally specific norms that are widely understood by members of the given culture. When evaluating messages to motivate workers, Indians, far more than Americans, preferred a message invoking obligations to one invoking autonomous personal choice norms. Results cast doubt on the claim, made regularly in both basic and applied psychology, that enhancing autonomy is a universally preferred method for boosting motivation.

Eruption age of permanent mandibular first molars and central incisors in the south Indian population

Directory of Open Access Journals (Sweden)

Gupta Rakhi

2007-01-01

Full Text Available Objective: The existing eruption schedules for permanent and deciduous dentition are based on studies in the Western population. Since Indians differ from Westerners racially, genetically, and environmentally, these studies fail to provide relevant guidance on the eruption schedule in the Indian population. This study aims at determining the eruption pattern of permanent mandibular molars and central incisors in the south Indian population. Materials and Methods: 10,156 apparently healthy Indian children in the age-group of 6-9 years were examined with mouth mirror and probe under adequate illumination for the status of the eruption of the permanent mandibular first molar and permanent mandibular central incisor. Pearson′s Chi-square test with Yates′ continuity correction was used to calculate the P -value for comparison of proportion between girls and boys. The values obtained in our study were compared with the standard values. The Z-test with continuity correction was used to calculate the P -value. Results: As per our study, the permanent mandibular first molars and central incisors erupted one to two years later compared to the values reported in Westerners. The earlier eruption of the permanent mandibular first molars compared to the permanent mandibular central incisors, as well as the earlier eruption of both the teeth in girls compared to boys, were in accordance with the existing literature. Conclusion: The eruption age reported by us may form a standard reference for eruption age in Indians.

Golden proportion assessment between maxillary and mandibular teeth on Indian population

Science.gov (United States)

Kumar, Vaikunth Vijay; Rangarajan, Vedantham

2012-01-01

PURPOSE This study evaluated the existence of golden proportion between the widths of the maxillary and mandibular anterior teeth in Indian population. MATERIALS AND METHODS The clinical tooth width measurements were recorded with the digital vernier calipers on 576 patients of both sexes in the age group of 21 - 30 years. Flexible ruler was used to determine the width of maxillary and mandibular anterior teeth on the patients by the same operator. The data obtained was statistically analyzed using paired student t-test (α=.05). RESULTS The golden proportion was not found between the width of the right central and lateral incisors in 53% of women and 47% of men. The results revealed the golden percentage was rather inconstant in terms of relative tooth width. CONCLUSION The golden proportion is an inappropriate method to relate the successive widths of the maxillary anterior teeth in Indian population. PMID:22737310

Population Genetic Status of the Western Indian Ocean: What do we ...

African Journals Online (AJOL)

The Western Indian Ocean (WIO) is faced with increasing evidence of degradation and effective management initiatives are needed to curtail the environmental decline. The management of the WIO region can therefore benefit from the information that population genetics can provide. Extensive literature searches revealed ...

Radiographic study of the hip joint to determine anthropometric parameters for Indian population

International Nuclear Information System (INIS)

Bagaria, Vaibhav; Deshpande, Shirish; Kuthe, Abhay; Rasalkar, Darshana D.; Paunipagar, Bhawan K.; Madhugiri, Tanushree Subhash

2012-01-01

Hip replacement surgeries are on the rise in India. However, for these surgeries, most of the implants used are imported and manufactured entirely to suit the geometrical considerations of the western population. Studies in the past have shown that there are anatomical variations in the hip joint for different ethnic backgrounds and geographical locations. There is paucity of anthropometric hip joint data related to Indian population and anthropometric variations in skeletal geometry between Asian and Western counterparts have not yet been thoroughly reviewed and considered for implant manufacturing. The purpose of this anthropometric study is to determine any anatomical variations in the normal hip joint among the Indian population and to statistically compare the mean values with the existing data on western population. 422 Hip radiographs of 211 individuals (141 males and 70 females) with normal and healthy hip joints were evaluated to obtain the horizontal offset, vertical offset and neck shaft angle. For males, mean neck shaft angle was 127.68° (SD = 3.94), horizontal offset was 34.60 mm (SD = 6.55) and vertical offset was 39.17 mm (SD = 5.86). For females, mean neck shaft angle was 125.92° (SD = 4.75), horizontal offset was 32.96 mm (SD = 7.04) and vertical offset was 36.38 mm (SD = 6.28). When these parameters were compared to the data available from western world, there were significant anatomical variations and it was evident that there is a need to evaluate existing implants in relation to this data and possibly design the implants suited and relevant to Indian population.

Physical, currents, nutrients, and other data from bottle and GEK casts from the FUJI and SHIRASE in the Indian Ocean, North Pacific Ocean, South Pacific Ocean, and Southern Oceans (> 60 degrees South) from 06 December 1965 to 10 January 1994 (NODC Accession 0000039)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical, currents, nutrients, and other data were collected from bottle and GEK casts from the FUJI and SHIRASE in the Indian Ocean and other locations from 06...

Assessment of genetic diversity, population structure and relationships in Indian and non-Indian genotypes of finger millet (Eleusine coracana (L.) Gaertn) using genomic SSR markers.

Science.gov (United States)

Ramakrishnan, M; Antony Ceasar, S; Duraipandiyan, V; Al-Dhabi, N A; Ignacimuthu, S

2016-01-01

We evaluated the genetic variation and population structure in Indian and non-Indian genotypes of finger millet using 87 genomic SSR primers. The 128 finger millet genotypes were collected and genomic DNA was isolated. Eighty-seven genomic SSR primers with 60-70 % GC contents were used for PCR analysis of 128 finger millet genotypes. The PCR products were separated and visualized on a 6 % polyacrylamide gel followed by silver staining. The data were used to estimate major allele frequency using Power Marker v3.0. Dendrograms were constructed based on the Jaccard's similarity coefficient. Statistical fitness and population structure analyses were performed to find the genetic diversity. The mean major allele frequency was 0.92; the means of polymorphic alleles were 2.13 per primer and 1.45 per genotype; the average polymorphism was 59.94 % per primer and average PIC value was 0.44 per primer. Indian genotypes produced an additional 0.21 allele than non-Indian genotypes. Gene diversity was in the range from 0.02 to 0.35. The average heterozygosity was 0.11, close to 100 % homozygosity. The highest inbreeding coefficient was observed with SSR marker UGEP67. The Jaccard's similarity coefficient value ranged from 0.011 to 0.836. The highest similarity value was 0.836 between genotypes DPI009-04 and GPU-45. Indian genotypes were placed in Eleusine coracana major cluster (EcMC) 1 along with 6 non-Indian genotypes. AMOVA showed that molecular variance in genotypes from various geographical regions was 4 %; among populations it was 3 % and within populations it was 93 %. PCA scatter plot analysis showed that GPU-28, GPU-45 and DPI009-04 were closely dispersed in first component axis. In structural analysis, the genotypes were divided into three subpopulations (SP1, SP2 and SP3). All the three subpopulations had an admixture of alleles and no pure line was observed. These analyses confirmed that all the genotypes were genetically diverse and had been grouped based on

Articulated dental cast analysis of asymptomatic and symptomatic populations

Science.gov (United States)

Cordray, Frank E

2016-01-01

Dental instrumentation has long provided insight into the mechanism of musculo-skeletal function of the gnathic system. While large population studies associate dental arch displacement (DAD), especially laterally, with symptoms, mandibular condyle displacement (CD) resulting from DAD has not been targeted as possibly etiologic in the production of common muscle contraction headache (CMCH) and temporo-mandibular dysfunction (TMD). The objective was to evaluate the three-dimensional nature of DAD and CD between the seated condylar position (SCP) and the intercuspal position (ICP) and to compare results derived from large deprogrammed asymptomatic and symptomatic populations. A total of 1 192 sets of dental casts collected from asymptomatic and symptomatic populations were articulated in the SCP. The initial occlusal contact, DAD, and condylar displacement were evaluated for frequency, direction, and magnitude of displacement between the SCP and ICP. The data revealed significant displacement between the SCP and ICP of the condyles (displaced most frequently inferior (down) and posterior (distal)) and substantially increased frequency and magnitude of displacement of the dental arches (with posterior premature occlusal contacts, increased overjet, decreased overbite, midline differences, and occlusal classification changes) in symptomatic subjects. These discrepancies were statistically significant and clinically significant. The data support the concept of increased DAD and CD with dysfunction. Transverse condylar displacement, commonly presenting with dental cross bite, may be associated with CMCH and TMD. Displacement of the mandibular condyle may be an etiologic factor in CMCH and dysfunction of the temporo-mandibular joint. PMID:27357324

Indian parliamentarians meet to discuss population and food security.

Science.gov (United States)

1996-01-01

96 parliamentarians and state legislators attended a seminar on November 8 on food security, population, and development. The one-day meeting was held at the Parliament House Annex in New Delhi and organized by the Indian Association of Parliamentarians on Population and Development as part of a regional campaign to highlight the relationship between population and food security. The first session of the day focused upon the impact of population on food security and nutrition, the second session was on the strategy for food security through poverty alleviation, and the third session discussed food security through trade and self-sufficiency. The participants believe that population size is growing faster than food production. Furthermore, it is important to view both food production and the capacity of people to buy food. Poverty is rooted in unemployment and unemployment is the result of overpopulation. As such, overpopulation causes unemployment which results in the inability of the poor to buy food. A declaration was adopted at the seminar.

Molecular genotyping of ABO blood groups in some population groups from India.

Science.gov (United States)

Ray, Sabita; Gorakshakar, Ajit C; Vasantha, K; Nadkarni, Anita; Italia, Yazdi; Ghosh, Kanjaksha

2014-01-01

Indian population is characterized by the presence of various castes and tribal groups. Various genetic polymorphisms have been used to differentiate among these groups. Amongst these, the ABO blood group system has been extensively studied. There is no information on molecular genotyping of ABO blood groups from India. Therefore, the main objective of this study was to characterize the common A, B and O alleles by molecular analysis in some Indian population groups. One hundred samples from the mixed population from Mumbai, 101 samples from the Dhodia tribe and 100 samples from the Parsi community were included in this study. Initially, the samples were phenotyped by standard serologic techniques. PCR followed by single strand conformational polymorphsim (SSCP) was used for molecular ABO genotyping. Samples showing atypical SSCP patterns were further analysed by DNA sequencing to characterize rare alleles. Seven common ABO alleles with 19 different genotypes were found in the mixed population. The Dhodias showed 12 different ABO genotypes and the Parsis revealed 15 different ABO genotypes with six common ABO alleles identified in each of them. Two rare alleles were also identified. This study reports the distribution of molecular genotypes of ABO alleles among some population groups from India. Considering the extremely heterogeneous nature of the Indian population, in terms of various genotype markers like blood groups, red cell enzymes, etc., many more ABO alleles are likely to be encountered.

Establishment of reference CD4+ T cell values for adult Indian population

Directory of Open Access Journals (Sweden)

Ray Krishnangshu

2011-10-01

Full Text Available Abstract Background CD4+ T lymphocyte counts are the most important indicator of disease progression and success of antiretroviral treatment in HIV infection in resource limited settings. The nationwide reference range of CD4+ T lymphocytes was not available in India. This study was conducted to determine reference values of absolute CD4+ T cell counts and percentages for adult Indian population. Methods A multicentric study was conducted involving eight sites across the country. A total of 1206 (approximately 150 per/centre healthy participants were enrolled in the study. The ratio of male (N = 645 to female (N = 561 of 1.14:1. The healthy status of the participants was assessed by a pre-decided questionnaire. At all centers the CD4+ T cell count, percentages and absolute CD3+ T cell count and percentages were estimated using a single platform strategy and lyse no wash technique. The data was analyzed using the Statistical Package for the Social Scientist (SPSS, version 15 and Prism software version 5. Results The absolute CD4+ T cell counts and percentages in female participants were significantly higher than the values obtained in male participants indicating the true difference in the CD4+ T cell subsets. The reference range for absolute CD4 count for Indian male population was 381-1565 cells/μL and for female population was 447-1846 cells/μL. The reference range for CD4% was 25-49% for male and 27-54% for female population. The reference values for CD3 counts were 776-2785 cells/μL for Indian male population and 826-2997 cells/μL for female population. Conclusion The study used stringent procedures for controlling the technical variation in the CD4 counts across the sites and thus could establish the robust national reference ranges for CD4 counts and percentages. These ranges will be helpful in staging the disease progression and monitoring antiretroviral therapy in HIV infection in India.

Population Growth and Sprawl on the Pine Ridge Indian Reservation, South Dakota

Science.gov (United States)

Campbell, R. L.

2006-05-01

The most important impact on global land cover is human use and development. With the recent population growth occurring on the reservations in South Dakota, especially Pine Ridge Indian Reservation, the towns and agricultural areas of the reservation are undergoing a change. Although urban sprawl certainly is not a consideration on the reservations, the population explosion currently underway has seen a subsequent increase in rural sprawl. In this case, rural sprawl is defined as exponential population growth and geographic expansion of remote reservation communities. Using satellite imagery and software to render these images is a cost effective way to investigate this growth. Also, using remotely sensed data and a GIS (geographic information system) package can address different issues that concern people and communities in and around the Pine Ridge area. The objective of my project is to observe land use change on the Pine Ridge Indian reservation using Geographic Information Systems such as; ARCGis 9, ENVI, and Multispec, along with Landsat 4, 5, and 7 imagery over the past 20 years.

Social stratification in the Sikh population of Punjab (India) has a genetic basis: evidence from serological and biochemical markers.

Science.gov (United States)

Chahal, Sukh Mohinder Singh; Virk, Rupinder Kaur; Kaur, Sukhvir; Bansal, Rupinder

2011-01-01

The present study was planned to assess whether social stratification in the Sikh population inhabiting the northwest border Indian state of Punjab has any genetic basis. Blood samples were collected randomly from a total of 2851 unrelated subjects belonging to 21 groups of two low-ranking Sikh scheduled caste populations, viz. Mazhabi and Ramdasi, and a high-ranking Jat Sikh caste population of Punjab. The genetic profile of Sikh groups was investigated using a total of nine serobiochemical genetic markers, comprising two blood groups (ABO, RH(D)) and a battery of seven red cell enzyme polymorphisms (ADA, AK1, ESD, PGM1, GLO1, ACP1, GPI), following standard serological and biochemical laboratory protocols. Genetic structure was studied using original allele frequency data and statistical measures of heterozygosity, genic differentiation, genetic distance, and genetic admixture. Great heterogeneity was observed between Sikh scheduled caste and Jat Sikh populations, especially in the RH(D) blood group system, and distribution of ESD, ACP1, and PGM1 enzyme markers was also found to be significantly different between many of their groups. Genetic distance trees demonstrated little or no genetic affinities between Sikh scheduled caste and Jat Sikh populations; the Mazhabi and Ramdasi also showed little genetic relationship. Genetic admixture analysis suggested a higher element of autochthonous tribal extraction in the Ramdasi. The present study revealed much genetic heterogeneity in differently ranking Sikh caste populations of Punjab, mainly attributable to their different ethnic backgrounds, and provided a genetic basis to social stratification present in this religious community of Punjab, India.

Venous Thrombosis Risk after Cast Immobilization of the Lower Extremity: Derivation and Validation of a Clinical Prediction Score, L-TRiP(cast), in Three Population-Based Case-Control Studies.

Science.gov (United States)

Nemeth, Banne; van Adrichem, Raymond A; van Hylckama Vlieg, Astrid; Bucciarelli, Paolo; Martinelli, Ida; Baglin, Trevor; Rosendaal, Frits R; le Cessie, Saskia; Cannegieter, Suzanne C

2015-11-01

Guidelines and clinical practice vary considerably with respect to thrombosis prophylaxis during plaster cast immobilization of the lower extremity. Identifying patients at high risk for the development of venous thromboembolism (VTE) would provide a basis for considering individual thromboprophylaxis use and planning treatment studies. The aims of this study were (1) to investigate the predictive value of genetic and environmental risk factors, levels of coagulation factors, and other biomarkers for the occurrence of VTE after cast immobilization of the lower extremity and (2) to develop a clinical prediction tool for the prediction of VTE in plaster cast patients. We used data from a large population-based case-control study (MEGA study, 4,446 cases with VTE, 6,118 controls without) designed to identify risk factors for a first VTE. Cases were recruited from six anticoagulation clinics in the Netherlands between 1999 and 2004; controls were their partners or individuals identified via random digit dialing. Identification of predictor variables to be included in the model was based on reported associations in the literature or on a relative risk (odds ratio) > 1.2 and p ≤ 0.25 in the univariate analysis of all participants. Using multivariate logistic regression, a full prediction model was created. In addition to the full model (all variables), a restricted model (minimum number of predictors with a maximum predictive value) and a clinical model (environmental risk factors only, no blood draw or assays required) were created. To determine the discriminatory power in patients with cast immobilization (n = 230), the area under the curve (AUC) was calculated by means of a receiver operating characteristic. Validation was performed in two other case-control studies of the etiology of VTE: (1) the THE-VTE study, a two-center, population-based case-control study (conducted in Leiden, the Netherlands, and Cambridge, United Kingdom) with 784 cases and 523 controls

Computed Tomography-Based Occipital Condyle Morphometry in an Indian Population to Assess the Feasibility of Condylar Screws for Occipitocervical Fusion.

Science.gov (United States)

Srivastava, Abhishek; Nanda, Geetanjali; Mahajan, Rajat; Nanda, Ankur; Mishra, Nirajana; Karmaran, Srinivasa; Batra, Sahil; Chhabra, Harvinder Singh

2017-12-01

A retrospective computed tomography (CT)-based morphometric study of 82 occipital condyles in the Indian population, focusing on critical morphometric dimensions with relation to placing condylar screws. This study focused on determining the feasibility of placing occipital condylar screws in an Indian population using CT anatomical morphometric data. The occipital condylar screw is a novel technique being explored as one of the options in occipitocervical stabilization. Sex and ethnic variations in anatomical structures may restrict the feasibility of this technique in some populations. To the best of our knowledge, there are no CT-based data on an Indian population that assess the feasibility of occipital condylar screws. We measured the dimensions of 82 occipital condyles in 41 adults on coronal, sagittal, and axial reconstructed CT images. The differences were noted between the right and left sides and also between males and females. Statistical analysis was performed using the t -test, with a p -value of occipital condyle shows that condylar screws are anatomically feasible in a large portion of the Indian population. However, because a small number of population may not be suitable for this technique, meticulous study of preoperative anatomy using detailed CT data is advised.

The accident analysis of mobile mine machinery in Indian opencast coal mines.

Science.gov (United States)

Kumar, R; Ghosh, A K

2014-01-01

This paper presents the analysis of large mining machinery related accidents in Indian opencast coal mines. The trends of coal production, share of mining methods in production, machinery deployment in open cast mines, size and population of machinery, accidents due to machinery, types and causes of accidents have been analysed from the year 1995 to 2008. The scrutiny of accidents during this period reveals that most of the responsible factors are machine reversal, haul road design, human fault, operator's fault, machine fault, visibility and dump design. Considering the types of machines, namely, dumpers, excavators, dozers and loaders together the maximum number of fatal accidents has been caused by operator's faults and human faults jointly during the period from 1995 to 2008. The novel finding of this analysis is that large machines with state-of-the-art safety system did not reduce the fatal accidents in Indian opencast coal mines.

Gorlin-Goltz syndrome: A case series of 5 patients in North Indian population with comparative analysis of literature.

Science.gov (United States)

Lata, Jeevan; Verma, Nitin; Kaur, Amandeep

2015-09-01

In Indian scenario, Gorlin-Goltz syndrome (nevoid basal cell carcinoma syndrome [NBCCS]) has been rarely reported. The clinical, radiological, and histopathological findings and major and minor criteria in five cases of NBCCS in North Indian population have been presented along with a discussion of the role of gene mutation analysis in early diagnosis of syndrome. The diagnostic findings of Gorlin-Goltz syndrome in 5 patients were compared with other reports in Indian population and with reports of this syndrome in other parts of the world. The most common features seen were keratocystic odontogenic tumors (100%), calcifications of falx cerebri (60%), palmar-plantar pits (80%), rib anomalies (80%), macroencephaly (60%), ocular hypertelorism (80%), and frontal bossing (60%) in our series. Retained deciduous teeth seen in 80% patients whose association has not been previously reported has been presented. None of our patients had basal cell carcinoma, syndactyly or polydactyly, pectus deformity, bridging of sella turcica, pigmented nevi, or family history of this syndrome in contrast to such findings in other Indian patients. Medulloblastoma has not been reported in any Indian patient so far compared to this finding in other studies conducted worldwide. Combining the features of 48 patients in 38 cases of NBCCS being published in Indian literature with five cases of our series and on comparison with other studies in the world, a wide disparity in different ethnic groups and a wide variation in presentation of syndrome within the same population is suggested.

Gene diversity in some Muslim populations of North India.

Science.gov (United States)

Aarzoo, S Shabana; Afzal, Mohammad

2005-06-01

North Indian Muslim populations have historical, linguistic, and socioreligious significance to the Indian subcontinent. Although sociocultural and political dimensions of their demography are well documented, no detailed genetic structure of the populations is available. We have undertaken a survey of the gene frequencies of the ABO, Rh, PTC taste ability, sickling, and G6PD systems for different endogamous groups: Sheikh, Syed, Pathan, Ansari, Saifi, and Hindu Bania. All the groups at most loci showed statistically nonsignificant differences, except for ABO and PTC traits, for which interpopulational differences were seen. Heterozygosity ranged from 0.048 to 0.617 among the Sheikh, 0.149 to 0.599 among the Pathan, 0.105 to 0.585 among the Ansari, 0.25 to 0.869 among the Syed, 0.107 to 0.565 among the Saifi, and 0.100 to 0.492 among the Hindu Bania. The average D(ST) and G(ST) values for the five marker loci were 0.0625 +/- 0.098 and 0.1072 +/- 0.041, respectively. A dendrogram was constructed using the UPGMA clustering method. Our results revealed that the Pathan and the Sheikh form one cluster, the Syed and the Hindu Bania form another cluster, and the two clusters join together (the so-called higher caste); also, the Saifi and the Ansari form a separate cluster (lower caste). The results of the genetic distance analysis are useful for understanding the pattern of genetic relationships between different endogamous groups of Muslims.

HLA polymorphism in a Guarani-Indian population from Paraguay and its usefulness for the Hispano-Indian admixture study in Paraguay.

Science.gov (United States)

Benitez, O; Busson, M; Charron, D; Loiseau, P

2011-02-01

In this study we investigated the human leucocyte antigen-A (HLA-A), -B and DRB1 polymorphism of Native American population of Paraguay, the Guarani Indians. We found that the HLA variability consisted of 5 HLA-A, 7 HLA-B and 6 HLA-DRB1 groups of alleles and of several specific alleles (B*1504, B*3505, B*3912, B*4004, B*5104, DRB1*0411, DRB1*1413) common in other Native American populations. The comparison of the HLA polymorphism of the Guaranis from Paraguay with the «Mestizos» of Paraguay and the Spaniards showed that the «Mestizos» of Paraguay are genetically very distant from the Guarani Indians of Paraguay but much more close to the Spaniards. This can be explained, at least in part, by the history of the country. Our results are of importance in transplantation, in particular in the search for an unrelated donor for a Paraguayan patient requiring hematopoietic stem cell transplantation. © 2010 Blackwell Publishing Ltd.

Prevalence of Catalase (-21 A/T Gene Variant in South Indian (Tamil Population

Directory of Open Access Journals (Sweden)

A. Lourdhu Mary

2014-01-01

Full Text Available Catalase, an endogenous antioxidant enzyme, is responsible for regulating reactive species levels. Several epidemiologic studies have suggested that single nucleotide polymorphism in catalase gene may be associated with many diseases. The genotype of CAT (-21 A/T point mutation in promoter region of catalase gene was determined by polymerase chain based restriction fragment length polymorphism analysis in the DNA of 100 healthy volunteers. The frequency of CAT (-21 A/T gene polymorphism AA, AT, and TT genotypes was found to be 7, 23, and 70 percent, respectively. The mutant “T” allele frequency was found to be 0.82 among the south Indian (Tamil population. Chi square analysis showed that the study population lies within the Hardy-Weinberg equilibrium. The wild type genotype (AA was found to be very low (7% and the mutant genotype (AT/TT was found to be more prevalent (93% among the south Indian population. This suggests that the high prevalence of mutant genotype may increase the susceptibility to oxidative stress associated diseases.

Gorlin–Goltz syndrome: A case series of 5 patients in North Indian population with comparative analysis of literature

Science.gov (United States)

Lata, Jeevan; Verma, Nitin; Kaur, Amandeep

2015-01-01

Objective: In Indian scenario, Gorlin–Goltz syndrome (nevoid basal cell carcinoma syndrome [NBCCS]) has been rarely reported. The clinical, radiological, and histopathological findings and major and minor criteria in five cases of NBCCS in North Indian population have been presented along with a discussion of the role of gene mutation analysis in early diagnosis of syndrome. Materials and Methods: The diagnostic findings of Gorlin–Goltz syndrome in 5 patients were compared with other reports in Indian population and with reports of this syndrome in other parts of the world. Results: The most common features seen were keratocystic odontogenic tumors (100%), calcifications of falx cerebri (60%), palmar-plantar pits (80%), rib anomalies (80%), macroencephaly (60%), ocular hypertelorism (80%), and frontal bossing (60%) in our series. Retained deciduous teeth seen in 80% patients whose association has not been previously reported has been presented. None of our patients had basal cell carcinoma, syndactyly or polydactyly, pectus deformity, bridging of sella turcica, pigmented nevi, or family history of this syndrome in contrast to such findings in other Indian patients. Medulloblastoma has not been reported in any Indian patient so far compared to this finding in other studies conducted worldwide. Conclusions: Combining the features of 48 patients in 38 cases of NBCCS being published in Indian literature with five cases of our series and on comparison with other studies in the world, a wide disparity in different ethnic groups and a wide variation in presentation of syndrome within the same population is suggested. PMID:26604574

Gorlin–Goltz syndrome: A case series of 5 patients in North Indian population with comparative analysis of literature

Directory of Open Access Journals (Sweden)

Jeevan Lata

2015-01-01

Full Text Available Objective: In Indian scenario, Gorlin–Goltz syndrome (nevoid basal cell carcinoma syndrome [NBCCS] has been rarely reported. The clinical, radiological, and histopathological findings and major and minor criteria in five cases of NBCCS in North Indian population have been presented along with a discussion of the role of gene mutation analysis in early diagnosis of syndrome. Materials and Methods: The diagnostic findings of Gorlin–Goltz syndrome in 5 patients were compared with other reports in Indian population and with reports of this syndrome in other parts of the world. Results: The most common features seen were keratocystic odontogenic tumors (100%, calcifications of falx cerebri (60%, palmar-plantar pits (80%, rib anomalies (80%, macroencephaly (60%, ocular hypertelorism (80%, and frontal bossing (60% in our series. Retained deciduous teeth seen in 80% patients whose association has not been previously reported has been presented. None of our patients had basal cell carcinoma, syndactyly or polydactyly, pectus deformity, bridging of sella turcica, pigmented nevi, or family history of this syndrome in contrast to such findings in other Indian patients. Medulloblastoma has not been reported in any Indian patient so far compared to this finding in other studies conducted worldwide. Conclusions: Combining the features of 48 patients in 38 cases of NBCCS being published in Indian literature with five cases of our series and on comparison with other studies in the world, a wide disparity in different ethnic groups and a wide variation in presentation of syndrome within the same population is suggested.

77 FR 61780 - Preparation of the 2013 American Indian Population and Labor Force Report

Science.gov (United States)

2012-10-11

... poverty line; and (5) the numbers employed in private sector positions and in public sector positions. The... population, by gender, eligible for the services which the Secretary provides to Indian people. The report...

Population differences in brain morphology and microstructure among Chinese, Malay, and Indian neonates.

Science.gov (United States)

Bai, Jordan; Abdul-Rahman, Muhammad Farid; Rifkin-Graboi, Anne; Chong, Yap-Seng; Kwek, Kenneth; Saw, Seang-Mei; Godfrey, Keith M; Gluckman, Peter D; Fortier, Marielle V; Meaney, Michael J; Qiu, Anqi

2012-01-01

We studied a sample of 75 Chinese, 73 Malay, and 29 Indian healthy neonates taking part in a cohort study to examine potential differences in neonatal brain morphology and white matter microstructure as a function of ethnicity using both structural T2-weighted magnetic resonance imaging (MRI) and diffusion tensor imaging (DTI). We first examined the differences in global size and morphology of the brain among the three groups. We then constructed the T2-weighted MRI and DTI atlases and employed voxel-based analysis to investigate ethnic differences in morphological shape of the brain from the T2-weighted MRI, and white matter microstructure measured by fractional anisotropy derived from DTI. Compared with Malay neonates, the brains of Indian neonates' tended to be more elongated in anterior and posterior axis relative to the superior-inferior axis of the brain even though the total brain volume was similar among the three groups. Although most anatomical regions of the brain were similar among Chinese, Malay, and Indian neonates, there were anatomical variations in the spinal-cerebellar and cortical-striatal-thalamic neural circuits among the three populations. The population-related brain regions highlighted in our study are key anatomical substrates associated with sensorimotor functions.

Gender Inequity in Education and Employment in the Scheduled Castes and Tribes of India.

Science.gov (United States)

Dunn, Dana

1993-01-01

Using ethnographic and statistical data, this paper presents a descriptive profile of scheduled caste and tribe women's status in Indian society. Findings indicate that relative to men, women in these groups have far more limited access to both educational and employment resources. (Contains 73 references.) (MDH)

The earliest settlers' antiquity and evolutionary history of Indian populations: evidence from M2 mtDNA lineage

Directory of Open Access Journals (Sweden)

Kotal M

2008-08-01

Full Text Available Abstract Background The "out of Africa" model postulating single "southern route" dispersal posits arrival of "Anatomically Modern Human" to Indian subcontinent around 66–70 thousand years before present (kyBP. However the contributions and legacy of these earliest settlers in contemporary Indian populations, owing to the complex past population dynamics and later migrations has been an issue of controversy. The high frequency of mitochondrial lineage "M2" consistent with its greater age and distribution suggests that it may represent the phylogenetic signature of earliest settlers. Accordingly, we attempted to re-evaluate the impact and contribution of earliest settlers in shaping the genetic diversity and structure of contemporary Indian populations; using our newly sequenced 72 and 4 published complete mitochondrial genomes of this lineage. Results The M2 lineage, harbouring two deep rooting subclades M2a and M2b encompasses approximately one tenth of the mtDNA pool of studied tribes. The phylogeographic spread and diversity indices of M2 and its subclades among the tribes of different geographic regions and linguistic phyla were investigated in detail. Further the reconstructed demographic history of M2 lineage as a surrogate of earliest settlers' component revealed that the demographic events with pronounced regional variations had played pivotal role in shaping the complex net of populations phylogenetic relationship in Indian subcontinent. Conclusion Our results suggest that tribes of southern and eastern region along with Dravidian and Austro-Asiatic speakers of central India are the modern representatives of earliest settlers of subcontinent. The Last Glacial Maximum aridity and post LGM population growth mechanised some sort of homogeneity and redistribution of earliest settlers' component in India. The demic diffusion of agriculture and associated technologies around 3 kyBP, which might have marginalized hunter-gatherer, is

Association of common genetic variants with human skin color variation in Indian populations.

Science.gov (United States)

Sarkar, Anujit; Nandineni, Madhusudan R

2018-01-01

Human skin color is one of the most conspicuously variable physical traits that has attracted the attention of physical anthropologists, social scientists and human geneticists. Although several studies have established the underlying genes and their variants affecting human skin color, they were mostly confined to Europeans and Africans and similar studies in Indian populations have been scanty. Studying the association between candidate genetic variants and skin color will help to validate previous findings and to better understand the molecular mechanism of skin color variation. In this study, 22 candidate SNPs from 12 genes were tested for association with skin color in 299 unrelated samples sourced from nine geographical locations in India. Our study establishes the association of 9 SNPs with the phenotype in Indian populations and could explain ∼31% of the variance in skin color. Haplotype analysis of chromosome 15 revealed a significant association of alleles G, A and C of SNPs rs1426654, rs11070627, and rs12913316, respectively, to the phenotype, and accounted for 17% of the variance. Latitude of the sampling location was also a significant factor, contributing to ∼19% of the variation observed in the samples. These observations support the findings that rs1426654 and rs4775730 located in SLC24A5, and rs11070627 and rs12913316 located in MYEF2 and CTXN2 genes respectively, are major contributors toward skin pigmentation and would aid in further unraveling the genotype-phenotype association in Indian populations. These findings can be utilized in forensic DNA applications for criminal investigations. © 2017 Wiley Periodicals, Inc.

ANTERIOR KNEE PAIN AND LOWER EXTREMITY FUNCTIONS IN INDIAN ADOLESCENT POPULATION

Directory of Open Access Journals (Sweden)

Riddhi Shroff

2016-01-01

Full Text Available Background & Purpose - Anterior knee pain is one of the most common musculoskeletal complain seen in Indian adolescent population with high incidence among those who are active in sports and recreation. The purpose of this study was to investigate the age of onset of anterior knee pain, to find its effect on sports participation and also to find the activities which are maximally affected due to anterior knee pain in Indian population. Method- A questionnaire based survey was conducted among 50 subjects using three outcome measures namely self made demographic questionnaire, anterior knee pain scale and lower extremity functional scale. Result- Maximally affected activities are running, jumping & squatting and maximally affected functions are squatting, running on uneven ground, making sharp turns while running and hopping with increase incidence of anterior knee pain among those who participate daily in sports. Conclusion- The study concluded, that in adolescent age group of 11-17 years, anterior knee pain is more prevalent in adolescent girls with the age of onset being around 13 years for girls & 14.5 years in boys and it also showed moderate positive correlation between anterior knee pain and lower extremity functions.

Influence of socio-economic status on access to different components of SCI management across Indian population.

Science.gov (United States)

Chhabra, H S; Bhalla, A M

2015-11-01

To assess the influence of financial constraints on access to different components of spinal cord injury (SCI) management in various socio-economic strata of the Indian population. Indian Spinal Injuries Centre (ISIC). One hundred fifty SCI individuals who came for follow-up at ISIC between March 2009 and March 2013 with at least 1 year of community exposure after discharge were included in the study. Socio-economic classification was carried out according to the Kuppuswamy scale, a standard scale for the Indian population. A self-designed questionnaire was administered. No sample was available from the lower group. There was a statistically significant difference (PSCI management. Aided upper lower group was dependent on welfare schemes for in-hospital treatment but could not access other components of management once discharged. Unaided upper lower group either faced severe difficulty or could not access management. Majority of lower middle group faced severe difficulty. Upper middle group was equally divided into facing severe, moderate or no difficulty. Most patients in the upper group faced no difficulty, whereas some faced moderate and a small number of severe difficulty. Financial constraints affected all components of SCI management in all except the upper group. The results of the survey suggest that a very large percentage of the Indian population would find it difficult to access comprehensive SCI management and advocate extension of essential medical coverage to unaided upper lower, lower middle and upper middle groups.

Prevalence of Weak D Antigen In Western Indian Population

Directory of Open Access Journals (Sweden)

Tanvi Sadaria

2015-12-01

Full Text Available Introduction: Discovery of Rh antigens in 1939 by Landsteiner and Weiner was the revolutionary stage in blood banking. Of these antigens, D, which decides Rh positivity or negativity, is the most antigenic. A problem is encountered when an individual has a weakened expression of D (Du, i.e., fewer numbers of D antigens on red cell membrane. Aims and Objectives: To know the prevalence of weak D in Indian population because incidence varies in different population. To determine the risk of alloimmunization among Rh D negative patients who receives the blood of weak D positive donors. Material and Methods: Rh grouping of 38,962 donors who came to The Department of Immunohematology and Blood Transfusion of Civil Hospital, Ahmedabad from 1st January 2013 to 30th September 2014 was done using the DIAGAST (Automated Grouping. The samples that tested negative for D antigen were further analysed for weak D (Du by indirect antiglobulin test using blend of Ig G and Ig M Anti D. This was done using Column agglutination method in ID card (gel card. Results: The total number of donors studied was 38,962. Out of these 3360(8.6% were tested Rh D negative. All Rh D negative donors were tested for weak D (Du. 22 (0.056% of total donors and 0.65% of Rh negative donors turned out to be weak D (Du positive. Conclusion: The prevalence of weak D (Du in Western Indian population is 0.056 %, So the risk of alloimmunization in our setting due to weak D (Du antigen is marginal. But, testing of weak D antigen is necessary in blood bank because weak D antigen is immunogenic and can produce alloimmunization if transfused to Rh D negative subjects.

Increasing incidence of Rocky Mountain spotted fever among the American Indian population in the United States.

Science.gov (United States)

Holman, Robert C; McQuiston, Jennifer H; Haberling, Dana L; Cheek, James E

2009-04-01

To examine trends of Rocky Mountain spotted fever (RMSF) incidence among American Indians compared with other race groups, a retrospective analysis of national RMSF surveillance data reported to the National Electronic Telecommunications System for Surveillance and the Tickborne Rickettsial Disease Case Report Forms system were used. The RMSF incidence for American Indians, which was comparable to those for other race groups during 1990-2000, increased at a disproportionate rate during 2001-2005. The average annual incidence of RMSF reported among American Indians for 2001-2005 was 16.8 per 1,000,000 persons compared with 4.2, 2.6, and 0.5 for white, black, and Asian/Pacific Islander persons, respectively. Most cases in American Indians were reported from Oklahoma (113.1 cases per 1,000,000), North Carolina (60.0), and Arizona (17.2). The incidence of RMSF increased dramatically among American Indians disproportionately to trends for other race groups. Education about tick-borne disease and prevention measures should be addressed for high-risk American Indian populations.

77 FR 31637 - Revision of Agency Information Collection for the American Indian and Alaska Native Population...

Science.gov (United States)

2012-05-29

... the population by gender, age, availability for work, and employment. The survey instrument is being... Act of 1995. The Indian Employment, Training and Related Services Demonstration Act of 1992, as... of standard measures of population and employment, as defined in the Federal Statistical System, to...

Caste- and ethnicity-based inequalities in HIV/AIDS-related knowledge gap: a case of Nepal.

Science.gov (United States)

Atteraya, Madhu; Kimm, HeeJin; Song, In Han

2015-05-01

Caste- and ethnicity-based inequalities are major obstacles to achieving health equity. The authors investigated whether there is any association between caste- and ethnicity-based inequalities and HIV-related knowledge within caste and ethnic populations. They used the 2011 Nepal Demographic and Health Survey, a nationally represented cross-sectional study data set. The study sample consisted of 11,273 women between 15 and 49 years of age. Univariate and logistic regression models were used to examine the relationship between caste- and ethnicity-based inequalities and HIV-related knowledge. The study sample was divided into high Hindu caste (47.9 percent), "untouchable" caste (18.4 percent), and indigenous populations (33.7 percent). Within the study sample, the high-caste population was found to have the greatest knowledge of the means by which HIV is prevented and transmitted. After controlling for socioeconomic and demographic characteristics, untouchables were the least knowledgeable. The odds ratio for incomplete knowledge about transmission among indigenous populations was 1.27 times higher than that for high Hindu castes, but there was no significant difference in knowledge of preventive measures. The findings suggest the existence of a prevailing HIV knowledge gap. This in turn suggests that appropriate steps need to be implemented to convey complete knowledge to underprivileged populations.

Genetic species identification and population structure of Halophila (Hydrocharitaceae) from the Western Pacific to the Eastern Indian Ocean.

Science.gov (United States)

Nguyen, Vy X; Detcharoen, Matsapume; Tuntiprapas, Piyalap; Soe-Htun, U; Sidik, Japar B; Harah, Muta Z; Prathep, Anchana; Papenbrock, Jutta

2014-04-30

The Indo-Pacific region has the largest number of seagrass species worldwide and this region is considered as the origin of the Hydrocharitaceae. Halophila ovalis and its closely-related species belonging to the Hydrocharitaceae are well-known as a complex taxonomic challenge mainly due to their high morphological plasticity. The relationship of genetic differentiation and geographic barriers of H. ovalis radiation was not much studied in this region. Are there misidentifications between H. ovalis and its closely related species? Does any taxonomic uncertainty among different populations of H. ovalis persist? Is there any genetic differentiation among populations in the Western Pacific and the Eastern Indian Ocean, which are separated by the Thai-Malay peninsula? Genetic markers can be used to characterize and identify individuals or species and will be used to answer these questions. Phylogenetic analyses of the nuclear ribosomal internal transcribed spacer region based on materials collected from 17 populations in the Western Pacific and the Eastern Indian Ocean showed that some specimens identified as H. ovalis belonged to the H. major clade, also supported by morphological data. Evolutionary divergence between the two clades is between 0.033 and 0.038, much higher than the evolutionary divergence among H. ovalis populations. Eight haplotypes were found; none of the haplotypes from the Western Pacific is found in India and vice versa. Analysis of genetic diversity based on microsatellite analysis revealed that the genetic diversity in the Western Pacific is higher than in the Eastern Indian Ocean. The unrooted neighbor-joining tree among 14 populations from the Western Pacific and the Eastern Indian Ocean showed six groups. The Mantel test results revealed a significant correlation between genetic and geographic distances among populations. Results from band-based and allele frequency-based approaches from Amplified Fragment Length Polymorphism showed that all

Changes in the Food Habits of Asian Indians in the United States: A Case Study

Science.gov (United States)

Gupta, Santosh P.

1975-01-01

This exploratory study focused on acculturation in the food habits of first generation Asian Indian immigrants in the United States. It was hypothesized that: 1) food habits of Asian Indians are changing toward the American pattern; and 2) these changes are directly related to the subject's sex, caste, age, marital status, and duration of exposure…

Growth of the human lens in the Indian adult population: Preliminary observations

Directory of Open Access Journals (Sweden)

Ashik Mohamed

2012-01-01

Full Text Available Context: The eye lens grows throughout life by the addition of new cells inside the surrounding capsule. How this growth affects the properties of the lens is essential for understanding disorders such as cataract and presbyopia. Aims: To examine growth of the human lens in the Indian population and compare this with the growth in Western populations by measuring in vitro dimensions together with wet and dry weights. Settings and Design: The study was conducted at the research wing of a tertiary eye care center in South India and the study design was prospective. Materials and Methods: Lenses were removed from eye bank eyes and their dimensions measured with a digital caliper. They were then carefully blotted dry and weighed before being placed in 5% buffered formalin. After 1 week fixation, the lenses were dried at 80 °C until constant weight was achieved. The constant weight was noted as the dry weight of the lens. Statistical Analysis Used: Lens parameters were analyzed as a function of age using linear and logarithmic regression methods. Results: Data were obtained for 251 lenses, aged 16-93 years, within a median postmortem time of 22 h. Both wet and dry weights increased linearly at 1.24 and 0.44 mg/year, respectively, throughout adult life. The dimensions also increased continuously throughout this time. Conclusions: Over the age range examined, lens growth in the Indian population is very similar to that in Western populations.

Nodular cast iron and casting monitoring

Directory of Open Access Journals (Sweden)

S. Pietrowski

2008-10-01

Full Text Available In this paper quality monitoring of nodular cast iron and casting made of it is presented. A control system of initial liquid cast iron to spheroidization, after spheroidization and inoculation with using of TDA method was shown. An application of an ultrasonic method to assessment of the graphite form and the metal matrix microstructure of castings was investigated.

The labor/land ratio and India's caste system

OpenAIRE

Duleep, Harriet

2012-01-01

This paper proposes that India’s caste system and involuntary labor were joint responses by a nonworking landowning class to a low labor/land ratio in which the rules of the caste system supported the institution of involuntary labor. The hypothesis is tested in two ways: longitudinally, with data from ancient religious texts, and cross-sectionally, with twentieth-century statistics on regional population/land ratios linked to anthropological measures of caste-system rigidity. Both the longit...

Prevalence of radix entomolaris in mandibular permanent first molars: a study in a South Indian population.

Science.gov (United States)

Chandra, Saurabh S; Chandra, Supriya; Shankar, Padmanabhan; Indira, Rajamani

2011-09-01

Anatomical racial variations are an acknowledged characteristic in permanent molars. Generally, mandibular first molars have 2 roots; however, the presence of a third root, radix entomolaris (RE), is a major anatomic variant among many population groups. This study evaluated the prevalence of permanent mandibular first molars featuring a distolingual root in a South Indian population. Five hundred patients of South Indian origin possessing bilateral mandibular first molars were selected. The radiographs of these patients were evaluated under optimal conditions. A total of 1000 mandibular first molars were screened and the incidence of 3-rooted mandibular first molars and the correlation between left and right side occurrence and between either gender was recorded. The prevalence of 3-rooted mandibular first molars was 18.6% of the patients examined and 13.3% of the teeth examined. There was no statistically significant difference between genders or side of occurrence (P > .05). The bilateral incidence of a symmetric distribution was 43.01%. RE is considered an Asiatic trait. The occurrence of this macrostructure in the South Indian population was 13.3%, which was lower than that of other patients of Mongoloid origin. The clinician must thoroughly examine the radiograph before initiation of endodontic therapy. Copyright © 2011 Mosby, Inc. All rights reserved.

Traces of sub-Saharan and Middle Eastern lineages in Indian Muslim populations

Science.gov (United States)

Eaaswarkhanth, Muthukrishnan; Haque, Ikramul; Ravesh, Zeinab; Romero, Irene Gallego; Meganathan, Poorlin Ramakodi; Dubey, Bhawna; Khan, Faizan Ahmed; Chaubey, Gyaneshwer; Kivisild, Toomas; Tyler-Smith, Chris; Singh, Lalji; Thangaraj, Kumarasamy

2010-01-01

Islam is the second most practiced religion in India, next to Hinduism. It is still unclear whether the spread of Islam in India has been only a cultural transformation or is associated with detectable levels of gene flow. To estimate the contribution of West Asian and Arabian admixture to Indian Muslims, we assessed genetic variation in mtDNA, Y-chromosomal and LCT/MCM6 markers in 472, 431 and 476 samples, respectively, representing six Muslim communities from different geographical regions of India. We found that most of the Indian Muslim populations received their major genetic input from geographically close non-Muslim populations. However, low levels of likely sub-Saharan African, Arabian and West Asian admixture were also observed among Indian Muslims in the form of L0a2a2 mtDNA and E1b1b1a and J*(xJ2) Y-chromosomal lineages. The distinction between Iranian and Arabian sources was difficult to make with mtDNA and the Y chromosome, as the estimates were highly correlated because of similar gene pool compositions in the sources. In contrast, the LCT/MCM6 locus, which shows a clear distinction between the two sources, enabled us to rule out significant gene flow from Arabia. Overall, our results support a model according to which the spread of Islam in India was predominantly cultural conversion associated with minor but still detectable levels of gene flow from outside, primarily from Iran and Central Asia, rather than directly from the Arabian Peninsula. PMID:19809480

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Role of PET in improving wear properties of PP in dry sliding condition ... Material characterization of ancient Indian copper ... Influence of degree of deformation in rolling on anneal hardening effect of a cast copper alloy .... Modified technique of using conventional slider boat for liquid phase epitaxy of silicon for solar cell ...

Smile characterization by U.S. white, U.S. Asian Indian, and Indian populations.

Science.gov (United States)

Sharma, Neeru; Rosenstiel, Stephen F; Fields, Henry W; Beck, F Mike

2012-05-01

With growing demand for high esthetic standards, dentists must understand patient perception and incorporate their preferences into treatment. However, little is known about how cultural and ethnic differences influence esthetic perception. The purpose of this study was to determine whether differences in ethnic background, including the possibility of assimilation, affected a layperson's perception of esthetic and smile characteristics. A survey was developed containing images that were digitally manipulated into a series of barely perceptible steps, changing 1 smile parameter to form a strip of images that displayed that parameter over a wide range. Data were collected with a customized program which randomly displayed a single image and allowed the subject to use the mouse to adjust an on-screen slider according to displayed instructions, that is, "Please move the slider to select the image you find to be most ideal"; or "Please move the slider to select the first image that you find unattractive." A convenience sample (n=288) comprised of U.S. whites, U.S. Asian Indians, and Indians living in India was surveyed. This sample provided a power of .86 to detect a difference of ±1.5 mm. Subjects evaluated images showing the smile arc, buccal corridor, gingival display, vertical overlap, lateral incisal step, maxillary midline to midface, and maxillary to mandibular midline. Rater reliability was assessed with the Fleiss-Cohen weighted Kappa (Kw) statistic and corresponding 95% confidence interval after each question was repeated in a random sequence. Choice differences due to ethnicity were assessed with a multiple randomization test and the adjusted P value with the step-down Bonferrroni method of Holm (α=.05). The Kw for the 17 variables in all 3 groups ranged from 0.11 for ideal vertical overlap to 0.64 for ideal buccal corridor space. Overall reliability was fair to moderate. Differences attributed to ethnicity were demonstrated between the Asian Indians and U

Restricted genetic variation in populations of Achatina (Lissachatina) fulica outside of East Africa and the Indian Ocean Islands points to the Indian Ocean Islands as the earliest known common source.

Science.gov (United States)

Fontanilla, Ian Kendrich C; Sta Maria, Inna Mikaella P; Garcia, James Rainier M; Ghate, Hemant; Naggs, Fred; Wade, Christopher M

2014-01-01

The Giant African Land Snail, Achatina ( =  Lissachatina) fulica Bowdich, 1822, is a tropical crop pest species with a widespread distribution across East Africa, the Indian subcontinent, Southeast Asia, the Pacific, the Caribbean, and North and South America. Its current distribution is attributed primarily to the introduction of the snail to new areas by Man within the last 200 years. This study determined the extent of genetic diversity in global A. fulica populations using the mitochondrial 16S ribosomal RNA gene. A total of 560 individuals were evaluated from 39 global populations obtained from 26 territories. Results reveal 18 distinct A. fulica haplotypes; 14 are found in East Africa and the Indian Ocean islands, but only two haplotypes from the Indian Ocean islands emerged from this region, the C haplotype, now distributed across the tropics, and the D haplotype in Ecuador and Bolivia. Haplotype E from the Philippines, F from New Caledonia and Barbados, O from India and Q from Ecuador are variants of the emergent C haplotype. For the non-native populations, the lack of genetic variation points to founder effects due to the lack of multiple introductions from the native range. Our current data could only point with certainty to the Indian Ocean islands as the earliest known common source of A. fulica across the globe, which necessitates further sampling in East Africa to determine the source populations of the emergent haplotypes.

Restricted genetic variation in populations of Achatina (Lissachatina fulica outside of East Africa and the Indian Ocean Islands points to the Indian Ocean Islands as the earliest known common source.

Directory of Open Access Journals (Sweden)

Ian Kendrich C Fontanilla

Full Text Available The Giant African Land Snail, Achatina ( =  Lissachatina fulica Bowdich, 1822, is a tropical crop pest species with a widespread distribution across East Africa, the Indian subcontinent, Southeast Asia, the Pacific, the Caribbean, and North and South America. Its current distribution is attributed primarily to the introduction of the snail to new areas by Man within the last 200 years. This study determined the extent of genetic diversity in global A. fulica populations using the mitochondrial 16S ribosomal RNA gene. A total of 560 individuals were evaluated from 39 global populations obtained from 26 territories. Results reveal 18 distinct A. fulica haplotypes; 14 are found in East Africa and the Indian Ocean islands, but only two haplotypes from the Indian Ocean islands emerged from this region, the C haplotype, now distributed across the tropics, and the D haplotype in Ecuador and Bolivia. Haplotype E from the Philippines, F from New Caledonia and Barbados, O from India and Q from Ecuador are variants of the emergent C haplotype. For the non-native populations, the lack of genetic variation points to founder effects due to the lack of multiple introductions from the native range. Our current data could only point with certainty to the Indian Ocean islands as the earliest known common source of A. fulica across the globe, which necessitates further sampling in East Africa to determine the source populations of the emergent haplotypes.

Casting Technology.

Science.gov (United States)

Wright, Michael D.; And Others

1992-01-01

Three articles discuss (1) casting technology as it relates to industry, with comparisons of shell casting, shell molding, and die casting; (2) evaporative pattern casting for metals; and (3) high technological casting with silicone rubber. (JOW)

Genomic view on the peopling of India.

Science.gov (United States)

Tamang, Rakesh; Thangaraj, Kumarasamy

2012-10-01

India is known for its vast human diversity, consisting of more than four and a half thousand anthropologically well-defined populations. Each population differs in terms of language, culture, physical features and, most importantly, genetic architecture. The size of populations varies from a few hundred to millions. Based on the social structure, Indians are classified into various caste, tribe and religious groups. These social classifications are very rigid and have remained undisturbed by emerging urbanisation and cultural changes. The variable social customs, strict endogamy marriage practices, long-term isolation and evolutionary forces have added immensely to the diversification of the Indian populations. These factors have also led to these populations acquiring a set of Indian-specific genetic variations responsible for various diseases in India. Interestingly, most of these variations are absent outside the Indian subcontinent. Thus, this review is focused on the peopling of India, the caste system, marriage practice and the resulting health and forensic implications.

Length of urethra in the Indian adult male population

Directory of Open Access Journals (Sweden)

Venkatesh Krishnamoorthy

2012-01-01

Full Text Available Objective: The urethral length has not been measured in the Indian population. Even the international literature in this arena is very sparse. This paper is an attempt to develop a simple anatomical database for urethral length. Materials and Methods: Between January 2010 and April 2011, the urethral lengths of 422 adult male patients who required catheterization as part of regular treatment at our hospital, were recorded after obtaining consent from the patients and from the scientific and ethics review boards of the institution. Patients with history of prostatic or urethral abnormalities were excluded. The balloon of a sterile Foley′s catheter was inflated using 10 cc of saline. The length from the junction of the balloon to the ′Y′ junction of the Foley was measured. The catheter was then passed into the bladder and re-inflated to same volume. The penis was gently straightened and the length of the catheter outside the penis was measured till the premarked point at the ′Y′ junction. Subtracting this from the original length gave the length of the urethra. Results: The mean length of the urethra was 17.55 + 1.42 cm with a range between 14 and 22.5 cm. Conclusions: Literature in which the length of the normal adult male urethra is recorded for a significant sample size is very scarce. Our data adds to basic anatomic information of the male urethra specific to the Indian population. Statistical Methods: Descriptive statistical analysis was performed. The non-linear regression analysis was employed to find the normative values of urethral length according to age class.

Allele and Genotype Distributions of DNA Repair Gene Polymorphisms in South Indian Healthy Population

Directory of Open Access Journals (Sweden)

Katiboina Srinivasa Rao

2014-01-01

Full Text Available Various DNA repair pathways protect the structural and chemical integrity of the human genome from environmental and endogenous threats. Polymorphisms of genes encoding the proteins involved in DNA repair have been found to be associated with cancer risk and chemotherapeutic response. In this study, we aim to establish the normative frequencies of DNA repair genes in South Indian healthy population and compare with HapMap populations. Genotyping was done on 128 healthy volunteers from South India, and the allele and genotype distributions were established. The minor allele frequency of Xeroderma pigmentosum group A ( XPA G23A, Excision repair cross-complementing 2 ( ERCC2 /Xeroderma pigmentosum group D ( XPD Lys751Gln, Xeroderma pigmentosum group G ( XPG His46His, XPG Asp1104His, and X-ray repair cross-complementing group 1 ( XRCC1 Arg399Gln polymorphisms were 49.2%, 36.3%, 48.0%, 23.0%, and 34.0% respectively. Ethnic variations were observed in the frequency distribution of these polymorphisms between the South Indians and other HapMap populations. The present work forms the groundwork for cancer association studies and biomarker identification for treatment response and prognosis.

Brief communication: Population variation in human maxillary premolar accessory ridges (MxPAR).

Science.gov (United States)

Burnett, Scott E; Hawkey, Diane E; Turner, Christy G

2010-02-01

The purpose of this brief communication is to report the results of an analysis of maxillary premolar accessory ridges (MxPAR), a common but understudied accessory ridge that may occur both mesial and distal to the central ridge of the buccal cusp of upper premolars. We developed a new five-grade scoring plaque to better categorize MxPAR variation. Subsequently, we conducted a population analysis of MxPAR frequency in 749 dental casts of South African Indian, American Chinese, Alaskan Eskimo, Tohono O'odham (Papago), Akimel O'odham (Pima), Solomon Islander, South African Bantu, and both American and South African Whites. Northeast Asian and Asian-derived populations exhibited the highest MxPAR frequencies while Indo-European samples (South African Indians, American and South African Whites) exhibited relatively low frequencies. The Solomon Islanders and South African Bantu samples exhibited intermediate frequencies. Our analysis indicates that statistically significant differences in MxPAR frequency exist between major geographic populations. As a result, the MxPAR plaque has now been added to the Arizona State University Dental Anthropology System, an important contribution as maxillary premolar traits are underrepresented in analyses of dental morphology. 2009 Wiley-Liss, Inc.

Are marginalized women being left behind? A population-based study of institutional deliveries in Karnataka, India

Directory of Open Access Journals (Sweden)

Adamson Paul C

2012-01-01

Full Text Available Abstract Background While India has made significant progress in reducing maternal mortality, attaining further declines will require increased skilled birth attendance and institutional delivery among marginalized and difficult to reach populations. Methods A population-based survey was carried out among 16 randomly selected rural villages in rural Mysore District in Karnataka, India between August and September 2008. All households in selected villages were enumerated and women with children 6 years of age or younger underwent an interviewer-administered questionnaire on antenatal care and institutional delivery. Results Institutional deliveries in rural areas of Mysore District increased from 51% to 70% between 2002 and 2008. While increasing numbers of women were accessing antenatal care and delivering in hospitals, large disparities were found in uptake of these services among different castes. Mothers belonging to general castes were almost twice as likely to have an institutional birth as compared to scheduled castes and tribes. Mothers belonging to other backward caste or general castes had 1.8 times higher odds (95% CI: 1.21, 2.89 of having an institutional delivery as compared to scheduled castes and tribes. In multivariable analysis, which adjusted for inter- and intra-village variance, Below Poverty Line status, caste, and receiving antenatal care were all associated with institutional delivery. Conclusion The results of the study suggest that while the Indian Government has made significant progress in increasing antenatal care and institutional deliveries among rural populations, further success in lowering maternal mortality will likely hinge on the success of NRHM programs focused on serving marginalized groups. Health interventions which target SC/ST may also have to address both perceived and actual stigma and discrimination, in addition to providing needed services. Strategies for overcoming these barriers may include

Solidification and casting

CERN Document Server

Cantor, Brian

2002-01-01

INDUSTRIAL PERSPECTIVEDirect chillcasting of aluminium alloysContinuous casting of aluminium alloysContinuous casting of steelsCastings in the automotive industryCast aluminium-silicon piston alloysMODELLING AND SIMULATIONModelling direct chill castingMold filling simulation of die castingThe ten casting rulesGrain selection in single crystal superalloy castingsDefects in aluminium shape castingPattern formation during solidificationPeritectic solidificationSTRUCTURE AND DEFECTSHetergeneous nucleation in aluminium alloysCo

Bainite obtaining in cast iron with carbides castings

Directory of Open Access Journals (Sweden)

S. Pietrowski

2010-01-01

Full Text Available In these paper the possibility of upper and lower bainite obtaining in cast iron with carbides castings are presented. Conditions, when in cast iron with carbides castings during continuous free air cooling austenite transformation to upper bainite or its mixture with lower bainte proceeds, have been given. A mechanism of this transformation has been given, Si, Ni, Mn and Mo distribution in the eutectic cell has been tested and hardness of tested castings has been determined.

Fine-scale population structure and the era of next-generation sequencing.

Science.gov (United States)

Henn, Brenna M; Gravel, Simon; Moreno-Estrada, Andres; Acevedo-Acevedo, Suehelay; Bustamante, Carlos D

2010-10-15

Fine-scale population structure characterizes most continents and is especially pronounced in non-cosmopolitan populations. Roughly half of the world's population remains non-cosmopolitan and even populations within cities often assort along ethnic and linguistic categories. Barriers to random mating can be ecologically extreme, such as the Sahara Desert, or cultural, such as the Indian caste system. In either case, subpopulations accumulate genetic differences if the barrier is maintained over multiple generations. Genome-wide polymorphism data, initially with only a few hundred autosomal microsatellites, have clearly established differences in allele frequency not only among continental regions, but also within continents and within countries. We review recent evidence from the analysis of genome-wide polymorphism data for genetic boundaries delineating human population structure and the main demographic and genomic processes shaping variation, and discuss the implications of population structure for the distribution and discovery of disease-causing genetic variants, in the light of the imminent availability of sequencing data for a multitude of diverse human genomes.

Comparison of marginal accuracy of castings fabricated by conventional casting technique and accelerated casting technique: an in vitro study.

Science.gov (United States)

Reddy, S Srikanth; Revathi, Kakkirala; Reddy, S Kranthikumar

2013-01-01

Conventional casting technique is time consuming when compared to accelerated casting technique. In this study, marginal accuracy of castings fabricated using accelerated and conventional casting technique was compared. 20 wax patterns were fabricated and the marginal discrepancy between the die and patterns were measured using Optical stereomicroscope. Ten wax patterns were used for Conventional casting and the rest for Accelerated casting. A Nickel-Chromium alloy was used for the casting. The castings were measured for marginal discrepancies and compared. Castings fabricated using Conventional casting technique showed less vertical marginal discrepancy than the castings fabricated by Accelerated casting technique. The values were statistically highly significant. Conventional casting technique produced better marginal accuracy when compared to Accelerated casting. The vertical marginal discrepancy produced by the Accelerated casting technique was well within the maximum clinical tolerance limits. Accelerated casting technique can be used to save lab time to fabricate clinical crowns with acceptable vertical marginal discrepancy.

Melting and casting of FeAl-based cast alloy

Energy Technology Data Exchange (ETDEWEB)

Sikka, V.K. [Oak Ridge National Lab., TN (United States); Wilkening, D. [Columbia Falls Aluminum Co., Columbia Falls, MT (United States); Liebetrau, J.; Mackey, B. [AFFCO, L.L.C., Anaconda, MT (United States)

1998-11-01

The FeAl-based intermetallic alloys are of great interest because of their low density, low raw material cost, and excellent resistance to high-temperature oxidation, sulfidation, carburization, and molten salts. The applications based on these unique properties of FeAl require methods to melt and cast these alloys into complex-shaped castings and centrifugal cast tubes. This paper addresses the melting-related issues and the effect of chemistry on the microstructure and hardness of castings. It is concluded that the use of the Exo-Melt{trademark} process for melting and the proper selection of the aluminum melt stock can result in porosity-free castings. The FeAl alloys can be melted and cast from the virgin and revert stock. A large variation in carbon content of the alloys is possible before the precipitation of graphite flakes occurs. Titanium is a very potent addition to refine the grain size of castings. A range of complex sand castings and two different sizes of centrifugal cast tubes of the alloy have already been cast.

A prospective observational study of skin to subarachnoid space depth in the Indian population

Directory of Open Access Journals (Sweden)

Smita Prakash

2014-01-01

Full Text Available Background and Aims: A pre-puncture estimate of skin to subarachnoid space depth (SSD may guide spinal needle placement and reduce complications associated with lumbar puncture. Our aim was to determine (1 The SSD in Indian males, females, parturients and the overall population; (2 To derive formulae for predicting SSD and (3 To determine which previously suggested formula best suited our population. Methods: In this prospective, observational study, 800 adult Indian patients undergoing surgery under spinal anaesthesia were divided into three groups: Males (Group M, females (Group F and parturients (Group PF. SSD was measured after lumbar puncture. The relationship between SSD and patient characteristics was studied and statistical models were used to derive formula for predicting SSD. Statistical analysis included One-way ANOVA with post hoc analysis, forward stepwise multivariate regression analysis and paired t-tests. Results: Mean SSD was 4.71 ± 0.70 cm in the overall population. SSD in adult males (4.81 ± 0.68 cm was significantly longer than that observed in females (4.55 ± 0.66 cm but was comparable with SSD in parturients (4.73 ± 0.73 cm. Formula for predicting SSD in the overall population was 2.71 + 0.09 × Body Mass Index (BMI. Stocker′s formula when applied correlated best with the observed SSD. Formulae were derived for the three groups. Conclusions: We found gender-based differences in SSD, with SSD in males being significantly greater than that observed in the female population. SSD correlated with BMI in the parturient and the overall population. Amongst the previously proposed formulae, Stocker′s formula was most accurate in predicting SSD in our population.

Genetic differentiation and population structure of five ethnic groups of Punjab (North-West India).

Science.gov (United States)

Singh, Gagandeep; Talwar, Indu; Sharma, Rubina; Matharoo, Kawaljit; Bhanwer, A J S

2016-12-01

The state of Punjab in the North-West part of India has acted as the main passage for all the major human invasions into the Indian subcontinent. It has resulted in the mixing of foreign gene pool into the local populations, which led to an extensive range of genetic diversity and has influenced the genetic structure of populations in Punjab, North-West India. The present study was conducted to examine the genetic structure, relationships, and extent of genetic differentiation in five Indo-European speaking ethnic groups of Punjab. A total of 1021 unrelated samples belonging to Banias, Brahmins, Jat Sikhs, Khatris, and Scheduled castes were analyzed for four human-specific Ins/Del polymorphic loci (ACE, APO, PLAT, and D1) and three restriction fragment length polymorphisms ESR (PvuII), LPL (PvuII), and T2 (MspI) using Polymerase chain reaction (PCR). All the loci were found to be polymorphic among the studied populations. The frequency of the Alu insertion at APO locus was observed to exhibit the highest value (82.6-96.3 %), whereas D1 exhibited the lowest (26.5-45.6 %) among all the ethnic groups. The average heterozygosity among the studied populations ranged from 0.3816 in Banias to 0.4163 in Khatris. The F ST values ranged from 0.0418 to 0.0033 for the PLAT and LPL loci, respectively, with an average value being 0.0166. Phylogenetic analysis revealed that Banias and Khatris are genetically closest to each other. The Jat Sikhs are genetically close to Brahmins and are distant from the Banias. The Jat Sikhs, Banias, Brahmins, and Khatris are genetically very distant from the Scheduled castes. Overall, Uniform allele frequency distribution patterns, high average heterozygosity values, and a small degree of genetic differentiation in this study suggest a genetic proximity among the selected populations. A low level of genetic differentiation was observed in the studied population groups indicating that genetic drift might have been small or negligible in shaping

Social exclusion, caste & health: a review based on the social determinants framework.

Science.gov (United States)

Nayar, K R

2007-10-01

Poverty and social exclusion are important socio-economic variables which are often taken for granted while considering ill-health effects. Social exclusion mainly refers to the inability of our society to keep all groups and individuals within reach of what we expect as society to realize their full potential. Marginalization of certain groups or classes occurs in most societies including developed countries and perhaps it is more pronounced in underdeveloped countries. In the Indian context, caste may be considered broadly as a proxy for socio-economic status and poverty. In the identification of the poor, scheduled caste and scheduled tribes and in some cases the other backward castes are considered as socially disadvantaged groups and such groups have a higher probability of living under adverse conditions and poverty. The health status and utilization patterns of such groups give an indication of their social exclusion as well as an idea of the linkages between poverty and health. In this review, we examined broad linkages between caste and some select health/health utilization indicators. We examined data on prevalence of anaemia, treatment of diarrhoea, infant mortality rate, utilization of maternal health care and childhood vaccinations among different caste groups in India. The data based on the National Family Health Survey II (NFHS II) highlight considerable caste differentials in health. The linkages between caste and some health indicators show that poverty is a complex issue which needs to be addressed with a multi-dimensional paradigm. Minimizing the suffering from poverty and ill-health necessitates recognizing the complexity and adopting a perspective such as holistic epidemiology which can challenge pure technocentric approaches to achieve health status.

Anthropometric Evidence of Indian Welfare and Inequality in the 20th Century

OpenAIRE

Guntupalli, Aravinda Meera

2007-01-01

The major aim of this research is to contribute new ideas and insights regarding Indian welfare and inequality from 1900 to 2000. Using mean heights and coefficients of variation in height of various groups – defined by region, caste and religion - welfare and inequality were investigated. Moreover, to study contemporary welfare, the body mass index was used in the final chapter. The overall welfare of Indians did not change considerably from 1914-74. There was no significant improvement in I...

Genetic Isolation among the Northwestern, Southwestern and Central-Eastern Indian Ocean Populations of the Pronghorn Spiny Lobster Panulirus penicillatus

Directory of Open Access Journals (Sweden)

Muhamad Fadry Abdullah

2014-05-01

Full Text Available The pronghorn spiny lobster Panulirus penicillatus is a highly valuable species which is widely distributed in Indo-West Pacific and Eastern Pacific regions. Mitochondrial DNA control region sequences (566–571 bp were determined to investigate the population genetic structure of this species in the Indian Ocean. In total, 236 adult individuals of Panulirus penicillatus were collected from five locations in the Indian Ocean region. Almost all individuals had a unique haplotype. Intrapopulation haplotype (h and nucleotide (π diversities were high for each locality, ranging from h = 0.9986–1.0000 and π = 0.031593–0.043441. We observed distinct genetic isolation of population located at the northwestern and southwestern edge of the species range. Gene flow was found within localities in the central and eastern region of the Indian Ocean, probably resulting from an extended planktonic larval stage and prevailing ocean currents.

Temperature and salinity profiles from CTD casts from the KNORR and other platforms from the Indian Ocean and other locations as part of the International Decade of Ocean Exploration / International Ocean Studies / First Dynamic Response and Kinematics Experiment in the Drake Passage (IDOE/ISOS/FDRAKE) from 18 September 1978 to 15 October 1980 (NODC Accession 8700008)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity profiles were collected from CTD casts from the KNORR and other platforms in the Indian Ocean and other locations from 18 September 1978 to...

Spasmodic dysphonia: a seven-year audit of dose titration and demographics in the Indian population.

Science.gov (United States)

Nerurkar, N K; Banu, T P

2014-07-01

This study aimed to evaluate the demographics of spasmodic dysphonia in the Indian population and to analyse the optimum dose titration of botulinum toxin type A in this group. A comparative analysis with international studies was also performed. The study involved a retrospective analysis and audit of botulinum toxin type A dose titration in spasmodic dysphonia patients who visited our voice clinic between January 2005 and January 2012. The average total therapeutic dose required for patients with adductor spasmodic dysphonia was 4.2 U per patient per vocal fold (total 8.4 U per patient), and for patients with abductor spasmodic dysphonia, it was 4.6 U per patient. Our audit revealed that 80 per cent of the spasmodic dysphonia patients were male, which contrasts dramatically with international studies, wherein around 80 per cent of spasmodic dysphonia patients were female. Our study also revealed a higher dose titration of botulinum toxin for the Indian spasmodic dysphonia population in both adductor and abductor spasmodic dysphonia cases.

Asthma and American Indians/Alaska Natives

Science.gov (United States)

... Minority Population Profiles > American Indian/Alaska Native > Asthma Asthma and American Indians/Alaska Natives In 2015, 240, ... Native American adults reported that they currently have asthma. American Indian/Alaska Native children are 60% more ...

Cephalometric norms for the upper airway in a healthy North Indian population

Directory of Open Access Journals (Sweden)

Dipti Shastri

2015-01-01

Full Text Available Objective: The aim was to obtain normative data for cephalometric measurements of the upper airway in the North Indian population. Design: Observational study. Setting: University department and teaching hospital out-patient clinic. Subjects and Methods: A total of 180 healthy patients were included out of which 90 were males (age range, 8-16 years, and 90 were females (age range, 8-16 years, with normal skeletal facial profile, no history of snoring, sleep apnea, upper airway disease, tonsillectomy or adenoidectomy, obesity, or pathology in the pharynx. Twenty cephalometric airway measurements, including size of the tongue, soft palate, nasopharynx, oropharynx, hypopharynx, and relative position of the hyoid bone and valleculae were obtained. Landmarks on cephalometric radiographs were digitized and measurements were made using a specially designed computer program. Error analysis of measurements was performed and comparison of measurements according to sex was made. Results: Significant sex dimorphism was seen for the majority of measurements, with the exception of minimal depth of the airway, oropharyngeal depth of the airway, and the soft palate angle with the hard palate. Conclusion: A minimum sagittal dimension of the upper airway was evident despite differences in measurements between sexes. Findings from this study should be a useful reference for the assessment of sleep apnea in the North Indian population.

Executive compensation and firm performance: Evidence from Indian firms

Directory of Open Access Journals (Sweden)

Mehul Raithatha

2016-09-01

Full Text Available The study examines the relationship between executive compensation and firm performance among Indian firms. The evidence suggests that firm performance measured by accounting, as well as market-based measures, significantly affects executive compensation. We also test for the presence of persistence in executive compensation by employing the system-generalised methods of moments (GMM estimator. We find significant persistence in executive compensation among the sample firms. Further, we report the absence of pay–performance relationship among the smaller sample firms and business group affiliated firms. Thus, our findings cast doubts over the performance-based executive compensation practices of Indian business group affiliated firms.

Identification of fish populations with particular reference to the pelagic fish stocks of the Indian Ocean region

Digital Repository Service at National Institute of Oceanography (India)

Dwivedi, S.N.

The most essential step in any fishery management is the identification of discrete fish populations. This is particularly important for the development of Indian Ocean pelagic fisheries. The simple signal character analysis of meristic or metric...

Contextualised worship amongst the Nanticoke-Lenape American Indians

Directory of Open Access Journals (Sweden)

John R. Norwood

2017-10-01

Full Text Available The Christian history of the Nanticoke-Lenape people who live in three American Indian tribal communities of ‘first contact’ around the Delaware Bay (USA, is over three centuries old and continues in the contemporary tribal community congregations. The modern era of tribal cultural reprisal and rise of Pan-Indian neo-traditionalism has heightened an awareness of, and cast a critical eye on the absence of contextualisation in the regular worship of the tribal community churches. This article is a study in ethno-doxology and seeks to determine the need for contextualised worship, to analyse the challenges of contextualisation, and provide guidance for an approach to contextualisation of worship amongst the Nanticoke-Lenape Christian congregations.

Fibreglass Total Contact Casting, Removable Cast Walkers, and Irremovable Cast Walkers to Treat Diabetic Neuropathic Foot Ulcers: A Health Technology Assessment

Science.gov (United States)

Costa, Vania; Tu, Hong Anh; Wells, David; Weir, Mark; Holubowich, Corinne; Walter, Melissa

2017-01-01

Background Diabetic neuropathic foot ulcers are a risk factor for lower leg amputation. Many experts recommend offloading with fibreglass total contact casting, removable cast walkers, and irremovable cast walkers as a way to treat these ulcers. Methods We completed a health technology assessment, which included an evaluation of clinical benefits and harms, value for money, and patient preferences for offloading devices. We performed a systematic literature search on August 17, 2016, to identify randomized controlled trials that compared fibreglass total contact casting, removable cast walkers, and irremovable cast walkers with other treatments (offloading or non-offloading) in patients with diabetic neuropathic foot ulcers. We developed a decision-analytic model to assess the cost-effectiveness of fibreglass total contact casting, removable cast walkers, and irremovable cast walkers, and we conducted a 5-year budget impact analysis. Finally, we interviewed people with diabetes who had lived experience with foot ulcers, asking them about the different offloading devices and the factors that influenced their treatment choices. Results We identified 13 randomized controlled trials. The evidence suggests that total contact casting, removable cast walkers, and irremovable cast walkers are beneficial in the treatment of neuropathic, noninfected foot ulcers in patients with diabetes but without severe peripheral arterial disease. Compared to removable cast walkers, ulcer healing was improved with total contact casting (moderate quality evidence; risk difference 0.17 [95% confidence interval 0.00–0.33]) and irremovable cast walkers (low quality evidence; risk difference 0.21 [95% confidence interval 0.01–0.40]). We found no difference in ulcer healing between total contact casting and irremovable cast walkers (low quality evidence; risk difference 0.02 [95% confidence interval −0.11–0.14]). The economic analysis showed that total contact casting and irremovable

Analysis of human blood plasma proteome from ten healthy volunteers from Indian population.

Directory of Open Access Journals (Sweden)

Poonam Gautam

Full Text Available Analysis of any mammalian plasma proteome is a challenge, particularly by mass spectrometry, due to the presence of albumin and other abundant proteins which can mask the detection of low abundant proteins. As detection of human plasma proteins is valuable in diagnostics, exploring various workflows with minimal fractionation prior to mass spectral analysis, is required in order to study population diversity involving analysis in a large cohort of samples. Here, we used 'reference plasma sample', a pool of plasma from 10 healthy individuals from Indian population in the age group of 25-60 yrs including 5 males and 5 females. The 14 abundant proteins were immunodepleted from plasma and then evaluated by three different workflows for proteome analysis using a nanoflow reverse phase liquid chromatography system coupled to a LTQ Orbitrap Velos mass spectrometer. The analysis of reference plasma sample a without prefractionation, b after prefractionation at peptide level by strong cation exchange chromatography and c after prefractionation at protein level by sodium dodecyl sulfate polyacrylamide gel electrophoresis, led to the identification of 194, 251 and 342 proteins respectively. Together, a comprehensive dataset of 517 unique proteins was achieved from all the three workflows, including 271 proteins with high confidence identified by ≥ 2 unique peptides in any of the workflows or identified by single peptide in any of the two workflows. A total of 70 proteins were common in all the three workflows. Some of the proteins were unique to our study and could be specific to Indian population. The high-confidence dataset obtained from our study may be useful for studying the population diversity, in discovery and validation process for biomarker identification.

Genetic polymorphisms of multidrug and toxin extrusion proteins (MATE1 and MATE2 in South Indian population

Directory of Open Access Journals (Sweden)

Gerard Marshall Raj

2017-02-01

Conclusion: Thus, the allele and genotype distributions of SLC47A1 and SLC47A2 gene polymorphisms were established in South Indian population and were found to be different from the frequencies of other ethnicities.

The Repatriation, Readjustment, and second-term migration of Ex-Indentured Indian Laborers from British Guiana and Trinidad to India, 1838-1955

Directory of Open Access Journals (Sweden)

Lomarsh Roopnarine

2009-07-01

Full Text Available This article examines the readjustment and remigration of ex-indentured Indian laborers from India to the Caribbean. The author shows that there was a small but steady influx of ex-indentured Indian laborers or second-term Indian migrants to the Caribbean. The central question is why ex-indentured Indians returned to the Caribbean to again work under an abusive indenture system? The author contends that desperate conditions along with the restrictive caste structure in India as well their Caribbean experience forced ex-indentured Indian laborers to re-indenture themselves for a second and even third time.

Association of maternal risk factors with large for gestational age fetuses in Indian population

OpenAIRE

Shamim Khandaker; Shabana Munshi

2015-01-01

Objective: To estimate the risk of delivering large-for gestational age (LGA) fetuses associated with maternal obesity, excessive maternal weight gain, and gestational diabetes mellitus (GDM)- in Indian mothers. Design: Retrospective study. Settings: Fernandez Hospital Private Limited, Hyderabad, Andhra Pradesh, India; a tertiary perinatal centre. Populations: Pregnant singleton mothers with correct pregnancy dating. Methods: Estimated fetal weight (EFW) is determined using ultrasound variabl...

Indian values of tissue weighting factors for internal dosimetry

International Nuclear Information System (INIS)

Mehta, S.K.

1995-01-01

In the present work the induced cancer component of detriment by the relative risk (RR) as well as US National Institute of Health (NIH) models using Indian organ based baseline cancer data and the all-causes mortality of the Indian population has been estimated. The Indian values of tissue weighting factors (W T ) have been worked out by the ICRP-60 methodology. The Indian values of detriment from the exposure of principal organs stomach, lung, colon and bone marrow are factors of 1.5 to 2.5 lower than the corresponding ICRP values. The Indian values of W T differ significantly from the ICRP five population average values. A tissue weighting factor of 0.08 for breast, colon, lung and stomach for the Indian population is more appropriate than the ICRP assigned factors of 0.05, 0.12, 0.12 and 0.12 respectively for these organs. For gonads, the appropriate Indian factor is 0.29 instead of the ICRP value of 0.20. The use of appropriate Indian values of W T is advocated for the Indian population in special investigation cases requiring regulatory intervention. (author). 11 refs., 11 figs., 4 tabs

Using Electronic Health Records to Examine Disease Risk in Small Populations: Obesity Among American Indian Children, Wisconsin, 2007-2012.

Science.gov (United States)

Tomayko, Emily J; Weinert, Bethany A; Godfrey, Liz; Adams, Alexandra K; Hanrahan, Lawrence P

2016-02-25

Tribe-based or reservation-based data consistently show disproportionately high obesity rates among American Indian children, but little is known about the approximately 75% of American Indian children living off-reservation. We examined obesity among American Indian children seeking care off-reservation by using a database of de-identified electronic health records linked to community-level census variables. Data from electronic health records from American Indian children and a reference sample of non-Hispanic white children collected from 2007 through 2012 were abstracted to determine obesity prevalence. Related community-level and individual-level risk factors (eg, economic hardship, demographics) were examined using logistic regression. The obesity rate for American Indian children (n = 1,482) was double the rate among non-Hispanic white children (n = 81,042) (20.0% vs 10.6%, P American Indian children were less likely to have had a well-child visit (55.9% vs 67.1%, P American Indian records (18.3% vs 14.6%, P obesity risk among American Indian children (odds ratio, 1.8; 95% confidence interval, 1.6-2.1) independent of age, sex, economic hardship, insurance status, and geographic designation. An electronic health record data set demonstrated high obesity rates for nonreservation-based American Indian children, rates that had not been previously assessed. This low-cost method may be used for assessing health risk for other understudied populations and to plan and evaluate targeted interventions.

Prevalence of primary glaucoma in an urban South Indian population

Directory of Open Access Journals (Sweden)

Jacob Aby

1998-01-01

Full Text Available Glaucoma is fast emerging as a major cause of blindness in India. In order to estimate the prevalence of primary open angle glaucoma (POAG and primary angle closure glaucoma (PACG in an urban South Indian population, we examined 972 individuals aged 30-60 years, chosen using a cluster sampling technique from 12 census blocks of Vellore town. They underwent a complete ocular examination, including applanation tonometry and gonioscopy, at the Medical College Hospital. Characteristic field defects on automated perimetry was a diagnostic requisite for POAG. Prevalence (95% CI of POAG, PACG, and ocular hypertension were 4.1 (0.08-8.1, 43.2 (30.14-56.3, and 30.8 (19.8-41.9 per 1,000, respectively. All the PACG cases detected were of the chronic type. Hitherto unavailable community-based information on primary glaucoma in our study population indicates that PACG is about five times as common as POAG.

Diagnostic evaluation of rapid tests for scrub typhus in the Indian population is needed.

Science.gov (United States)

Shivalli, Siddharudha

2016-05-12

Owing to frequent outbreaks witnessed in different parts of the country in the recent past, scrub typhus is being described as a re-emerging infectious disease in India. Differentiating scrub typhus from other endemic diseases like malaria, leptospirosis, dengue fever, typhoid, etc. is difficult due to overlapping clinical features and a lower positivity for eschars in Asian populations. Hence, the diagnosis heavily relies on laboratory tests. Costs and the need of technical expertise limit the wide use of indirect immunoperoxidase or immunofluorescence assays, ELISA and PCR. The Weil-Felix test is the most commonly used and least expensive serological test, but lacks both sensitivity and specificity. Hence, the diagnosis of scrub typhus is often delayed or overlooked. With due consideration of the cost, rapidity, single test result and simplicity of interpretation, rapid diagnostic tests have come into vogue. However, evaluation of rapid diagnostic tests for scrub typhus in the Indian population is needed to justify or discourage their use. Research studies are needed to find the most suitable test in terms of the rapidity of the result, simplicity of the procedure, ease of interpretation and cost to be used in the Indian populace.

A case series of Nasopharyngeal Carcinoma among Indians, a low risk population, in Perak State, Malaysia.

Science.gov (United States)

Anusha, B; Philip, R; Norain, K; Harvinder, S; Gurdeep, S M

2012-12-01

Nasopharyngeal carcinoma (NPC) is rare among people of Indian ethnicity. A short retrospective case review of clinical records of Indian patients diagnosed with nasopharyngeal carcinoma in a period of 5 years was conducted. Their slides were further subjected to EBV encoded RNA (EBER) - In- situ Hybridization (ISH). The histologic subtype was nonkeratinizing carcinoma in all 4 patients. All were Epstein Barr Virus (EBV) positive. We believe that the crucial factor responsible for nasopharyngeal carcinoma is genetics; either a genetic susceptibility among high risk groups or genetic resistance/immunity in low risk groups. Further genetic studies are required to look for somatic or inherited chromosomal mutations among the various risk populations.

Control of cast iron and casts manufacturing by Inmold method

Directory of Open Access Journals (Sweden)

S. Pietrowski

2009-07-01

Full Text Available In this paper the usability of cast iron spheroidizing process in mould control by ATD method as well as by ultrasonic method were presented. Structure of instrumentation needed for control form performance of cast iron spheroidizing by Inmold method was illustrated. Author, pointed out that amount of magnesium master alloy should obtain 0,8 ÷ 1,0% of mass in form at all. Such quantity of preliminary alloy assure of obtain of nodular graphite in cast iron. In consequence of this, is reduce the cast iron liquidus temperature and decrease of recalescence temperature of graphite-eutectic crystallization in compare with initial cast iron. Control of casts can be carried out by ultrasonic method. In plain cast iron, ferritic-pearlitic microstructure is obtaining. Additives of 1,5% Cu ensure pearlitic structure.

Genetic Population Structure of the Coral Reef Sea Star Linckia laevigata in the Western Indian Ocean and Indo-West Pacific.

Science.gov (United States)

Otwoma, Levy Michael; Kochzius, Marc

2016-01-01

The coral reef sea star Linckia laevigata is common on shallow water coral reefs of the Indo-West Pacific. Its large geographic distribution and comprehensive data from previous studies makes it suitable to examine genetic differentiation and connectivity over large geographical scales. Based on partial sequences of the mitochondrial cytochrome oxidase I (COI) gene this study investigates the genetic population structure and connectivity of L. laevigata in the Western Indian Ocean (WIO) and compares it to previous studies in the Indo-Malay-Philippines Archipelago (IMPA). A total of 138 samples were collected from nine locations in the WIO. AMOVA revealed a low but significant ΦST-value of 0.024 for the WIO populations. In the hierarchical AMOVA, the following grouping rejected the hypothesis of panmixia: (1) Kenya (Watamu, Mombasa, Diani) and Tanzanian Island populations (Misali and Jambiani) and (2) the rest of the WIO sites (mainland Tanzania and Madagascar; ΦCT = 0.03). The genetic population structure was stronger and more significant (ΦST = 0.13) in the comparative analysis of WIO and IMPA populations. Three clades were identified in the haplotype network. The strong genetic differentiation (ΦCT = 0.199, P Indo-West Pacific populations of L. laevigata can be grouped into four biogeographic regions: (1) WIO (2) Eastern Indian Ocean (3) IMPA and (4) Western Pacific. The findings of this study support the existence of a genetic break in the Indo-West Pacific consistent with the effect of lowered sea level during the Pleistocene, which limited gene flow between the Pacific and Indian Ocean.

The casting of western sculpture during the XIXth century: sand casting versus lost wax casting

NARCIS (Netherlands)

Beentjes, T.P.C.

2014-01-01

This paper will discuss research into bronze casting techniques as practiced during the XIXth and early XXth century. Both natural sand casting (fonte au sable naturel) and lost wax casting (fonte à la cire perdue) were employed during this period and sometimes rivalled for commissions. Before the

Replication of type 2 diabetes candidate genes variations in three geographically unrelated Indian population groups.

Science.gov (United States)

Ali, Shafat; Chopra, Rupali; Manvati, Siddharth; Singh, Yoginder Pal; Kaul, Nabodita; Behura, Anita; Mahajan, Ankit; Sehajpal, Prabodh; Gupta, Subash; Dhar, Manoj K; Chainy, Gagan B N; Bhanwer, Amarjit S; Sharma, Swarkar; Bamezai, Rameshwar N K

2013-01-01

Type 2 diabetes (T2D) is a syndrome of multiple metabolic disorders and is genetically heterogeneous. India comprises one of the largest global populations with highest number of reported type 2 diabetes cases. However, limited information about T2D associated loci is available for Indian populations. It is, therefore, pertinent to evaluate the previously associated candidates as well as identify novel genetic variations in Indian populations to understand the extent of genetic heterogeneity. We chose to do a cost effective high-throughput mass-array genotyping and studied the candidate gene variations associated with T2D in literature. In this case-control candidate genes association study, 91 SNPs from 55 candidate genes have been analyzed in three geographically independent population groups from India. We report the genetic variants in five candidate genes: TCF7L2, HHEX, ENPP1, IDE and FTO, are significantly associated (after Bonferroni correction, ppopulation. Interestingly, SNP rs7903146 of the TCF7L2 gene passed the genome wide significance threshold (combined P value = 2.05E-08) in the studied populations. We also observed the association of rs7903146 with blood glucose (fasting and postprandial) levels, supporting the role of TCF7L2 gene in blood glucose homeostasis. Further, we noted that the moderate risk provided by the independently associated loci in combined population with Odds Ratio (OR)<1.38 increased to OR = 2.44, (95%CI = 1.67-3.59) when the risk providing genotypes of TCF7L2, HHEX, ENPP1 and FTO genes were combined, suggesting the importance of gene-gene interactions evaluation in complex disorders like T2D.

Skin hyperpigmentation in Indian population: Insights and best practice

Directory of Open Access Journals (Sweden)

Stephanie Nouveau

2016-01-01

Full Text Available Skin pigmentation is one of the most strikingly variable phenotypes in humans, therefore making cutaneous pigmentation disorders frequent symptoms manifesting in a multitude of forms. The most common among them include lentigines, postinflammatory hyperpigmentation, dark eye circles, and melasma. Variability of skin tones throughout the world is well-documented, some skin tones being reported as more susceptible to pigmentation disorders than others, especially in Asia and India. Furthermore, exposure to ultraviolet radiation is known to trigger or exacerbate pigmentation disorders. Preventive strategies for photoprotection and treatment modalities including topical and other medical approaches have been adopted by dermatologists to mitigate these disorders. This review article outlines the current knowledge on pigmentation disorders including pathophysiology, molecular profiling, and therapeutic options with a special focus on the Indian population.

Secular trends in menarcheal age in India-evidence from the Indian human development survey.

Directory of Open Access Journals (Sweden)

Praveen Kumar Pathak

Full Text Available Evidence from a number of countries in Europe and North America point towards the secular declining trend in menarcheal age with considerable spatial variations over the past two centuries. Similar trends were reported in several developing countries from Asia, Africa and Latin America. However, data corroborating any secular trend in the menarcheal age of the Indian population remained sparse and inadequately verified.We examined secular trends, regional heterogeneity and association of socioeconomic, anthropometric and contextual factors with menarcheal age among ever-married women (15-49 years in India. Using the pseudo cohort data approach, we fit multiple linear regression models to estimate secular trends in menarcheal age of 91394 ever-married women using the Indian Human Development Survey.The mean age at menarche among Indian women was 13.76 years (95 % CI: 13.75, 13.77 in 2005. It declined by three months from 13.83 years (95% CI: 13.81, 13.85 among women born prior to 1955-1964, to nearly 13.62 years (95% CI: 13.58, 13.67 among women born during late 1985-1989. However, these aggregate national figures mask extensive spatial heterogeneity as mean age at menarche varied from 15.0 years in Himachal Pradesh during 1955-1964 (95% CI: 14.89-15.11 to about 12.1 years in Assam (95% CI: 11.63-12.56 during 1985-1989.The regression analysis established a reduction of nearly one month per decade, suggesting a secular decline in age at menarche among Indian women. Notably, the menarcheal age was significantly associated with the area of residence, geographic region, linguistic groups, educational attainment, wealth status, caste and religious affiliations among Indian women.

Replication of type 2 diabetes candidate genes variations in three geographically unrelated Indian population groups.

Directory of Open Access Journals (Sweden)

Shafat Ali

Full Text Available Type 2 diabetes (T2D is a syndrome of multiple metabolic disorders and is genetically heterogeneous. India comprises one of the largest global populations with highest number of reported type 2 diabetes cases. However, limited information about T2D associated loci is available for Indian populations. It is, therefore, pertinent to evaluate the previously associated candidates as well as identify novel genetic variations in Indian populations to understand the extent of genetic heterogeneity. We chose to do a cost effective high-throughput mass-array genotyping and studied the candidate gene variations associated with T2D in literature. In this case-control candidate genes association study, 91 SNPs from 55 candidate genes have been analyzed in three geographically independent population groups from India. We report the genetic variants in five candidate genes: TCF7L2, HHEX, ENPP1, IDE and FTO, are significantly associated (after Bonferroni correction, p<5.5E-04 with T2D susceptibility in combined population. Interestingly, SNP rs7903146 of the TCF7L2 gene passed the genome wide significance threshold (combined P value = 2.05E-08 in the studied populations. We also observed the association of rs7903146 with blood glucose (fasting and postprandial levels, supporting the role of TCF7L2 gene in blood glucose homeostasis. Further, we noted that the moderate risk provided by the independently associated loci in combined population with Odds Ratio (OR<1.38 increased to OR = 2.44, (95%CI = 1.67-3.59 when the risk providing genotypes of TCF7L2, HHEX, ENPP1 and FTO genes were combined, suggesting the importance of gene-gene interactions evaluation in complex disorders like T2D.

Normative Data of Corpus Callosal Morphology in a North-West Indian Population- An autopsy and MRI study

Directory of Open Access Journals (Sweden)

Tulika Gupta

2009-01-01

The values of different CC parameters observed were almost similar to the values reported in the other two Indian studies. However, Indian values were found to be more than the Japanese values for length, height and most of the widths of CC. The length and width of CC were found to be less than those of Caucasian population. Generation of this data will help in comparing the CC structure of different sex and ages, to study variations from the normal and may help in surgical planning. Keywords:autopsy brains; corpus callosum; magnetic resonance imaging; morphometric data.

Establishment of sexual dimorphism in north indian population by odontometric study of permanent maxillary canine teeth

Directory of Open Access Journals (Sweden)

Shalini Gupta

2014-01-01

Full Text Available Aim: To investigate whether sexual dimorphism can be established by odontometric study of permanent maxillary canine teeth as well as inter-canine width in north Indian population. Study Design: The study was carried out at department of oral and maxillofacial pathology, King George′s Medical University, Lucknow, India on students and patients reporting at OPD. Out of total 180 subjects examined 90 subjects were female and 90 were male. Impressions of the upper arch were made using alginate and casts poured in dental stone. The mesiodistal diameter (MD of the crown of permanent maxillary canine both on right and left sides and inter-canine width were measured. From these measurements, maxillary canine index was calculated. The percentage of sexual dimorphism (SD was assessed for all the parameters. Results: In the present study, the MD of maxillary canine for both right (P = 0.001 and left side (P = 0.005 was significantly higher among male subjects than females, Similar observation was found for inter-canine width too (P = 0.0001. However, the maxillary canine index for right and left was almost similar (P > 0.05 for both male and female subjects. The SD in right and left MDs of maxillary canine was 4.2% and 3.6% respectively. For, inter-canine width it was maximum (13.7%. However, SD in right and left canine index showed negative values (−2.1% and -0.9% respectively. Conclusion: There was SD in MD and inter-canine width of permanent maxillary canine teeth. SD was more on right permanent maxillary canine teeth than left permanent maxillary canine.

Determining casting defects in near-net shape casting aluminum parts by computed tomography

Science.gov (United States)

Li, Jiehua; Oberdorfer, Bernd; Habe, Daniel; Schumacher, Peter

2018-03-01

Three types of near-net shape casting aluminum parts were investigated by computed tomography to determine casting defects and evaluate quality. The first, second, and third parts were produced by low-pressure die casting (Al-12Si-0.8Cu-0.5Fe-0.9Mg-0.7Ni-0.2Zn alloy), die casting (A356, Al-7Si-0.3Mg), and semi-solid casting (A356, Al-7Si-0.3Mg), respectively. Unlike die casting (second part), low-pressure die casting (first part) significantly reduced the formation of casting defects (i.e., porosity) due to its smooth filling and solidification under pressure. No significant casting defect was observed in the third part, and this absence of defects indicates that semi-solid casting could produce high-quality near-net shape casting aluminum parts. Moreover, casting defects were mostly distributed along the eutectic grain boundaries. This finding reveals that refinement of eutectic grains is necessary to optimize the distribution of casting defects and reduce their size. This investigation demonstrated that computed tomography is an efficient method to determine casting defects in near-net shape casting aluminum parts.

Gender variation in morphological patterns of lip prints among some north Indian populations.

Science.gov (United States)

Vats, Yogesh; Dhall, Jasmine Kaur; Kapoor, Ak

2012-01-01

Personal identification is an integral part of forensic investigations. For the same, DNA profiling and fingerprints are the most commonly used tools. But these evidences are not ubiquitous and may not necessarily be obtained from the crime scene. In such a scenario, other physical and trace evidences play a pivotal role and subsequently the branches employed are forensic osteology, odontology, biometrics, etc. A relatively recent field in the branch of forensic odontology is cheiloscopy or the study of lip prints. A comparison of lip prints from the crime scene and those obtained from the suspects may be useful in the identification or narrowing down the investigation. The purpose of the present study is to determine the gender and population variability in the morphological patterns of lip prints among brahmins, Jats, and scheduled castes of Delhi and Haryana, India. Samples were collected from Jats, brahmins, and scheduled castes of Delhi and Haryana. The total sample size consisted of 1399 individuals including 781 males and 618 females in the age group of 8-60 years. Care was taken not to collect samples from genetically related individuals. The technique was standardized by recording lip prints of 20 persons and analyzing them. Lip prints were collected by using a corporate's invisible tape and analyzed using a hand lens. The patterns were studied along the entire length and breadth of both the upper and the lower lip. The data were analyzed by SPSS statistical package version 17 to determine the frequencies and percentages of occurrence of the pattern types in each population group and a comparison between males and females among the groups was carried out by using the z test. The z-test comparison between patterns of males and females shows significant differences with respect to pattern types I', II, III, and IV among brahmins; I', II, III, IV, and Y among Jats; and I, I', II, III, and V among scheduled castes. Thus, it can be concluded that the

Spectrum of neurocognitive dysfunction in Indian population on FDG PET/CT imaging

International Nuclear Information System (INIS)

Sharma, Rajnish; Tripathi, Madhavi; D’Souza, Maria M; Jaimini, Abhinav; Varshney, Raunak; Panwar, Puja; Kaushik, Aruna; Saw, Sanjeev; Seher, Romana; Pandey, Santosh; Singh, Dinesh; Solanki, Yachna; Mishra, Anil K; Mondal, Anupam; Tripathi, RP

2011-01-01

A variety of neurodegenerative disorders produce significant abnormal brain function which can be detected using fluorodeoxyglucose positron emission tomography (FDG PET) scan even when structural changes are not detected on CT or MRI Scan. A study was undertaken at our institute to evaluate the FDG PET/CT findings in Indian population suffering from mild cognitive impairment (MCI), Alzheimer's disease (AD), fronto-temporal dementia (FTD), dementia with lewy body disease (DLBD) and other miscellaneous causes of dementia. 117 subjects having neurocognitive deficits and 36 normals were included in our study. All patients underwent a detailed history and clinical examination. This was followed by a mini mental state examination. Subsequently an FDG brain PET scan and an MRI were done. In the patient population included in our study group 36 were normal, 39 had MCI, 40 had AD, 14 had FTD, and 13 had DLBD and 11 dementia due to other miscellaneous causes. MCI patients showed primarily reduced tracer uptake in the mesio-temporal cortex. AD patients showed reduced tracer concentration in temporo-parietal lobes, while patients with advanced diseases showed frontal lobe disease additionally. In subjects of FTD, reduced radiotracer uptake in the fronto-temporal lobes was noted. In addition, FTD patients also showed basal ganglia defects. In contrast the DLBD patients showed globally reduced FDG uptake including severely affecting the occipital cortices. In the current study the F18-FDG PET scans have been shown to be highly useful in the diagnosis of various neurocognitive disorders of the brain. AD was found to be the most common dementia in the Indian population followed by MCI. Diffuse Lewy body disease, FTD and other miscellaneous categories of dementia had a near similar incidence

Serum PSA levels in the Indian population: Is it different?

Science.gov (United States)

Agrawal, Amit; Karan, Shailesh Chandra

2017-04-01

Serum prostate-specific antigen (PSA) is an important tumour, marker which is widely used to trigger trans-rectal ultrasound (TRUS)-guided prostate biopsy. However, the PSA levels vary with race and ethnicity. Therefore, there is a need to have an Indian reference range. All adult male patients meeting the inclusion and exclusion criteria were enrolled in this study. They were subjected to assessment of serum total PSA, digital rectal examination and trans-abdominal ultrasound. If any one or more of these were found abnormal, then a TRUS-guided 12-core prostate biopsy was done. Patients who were detected to have prostatic cancer were excluded from the final analysis. The data so obtained was grouped among the following three age groups: 40-49, 50-59 and 60-70 years, and the age-specific PSA values, prostatic volume and PSA density were found. A total of 1772 patients were analysed. The mean serum total PSA was 1.76 ng/ml with a standard deviation of 2.566 ng/ml. Group-wise age distribution of the mean serum total PSA was 1.22, 1.97 and 2.08 ng/ml in 40-49, 50-59 and 60-70 years age groups. The mean total PSA and the age-specific PSA range tend to be lower in the Indians than the Western population.

Assessing accuracy of genotype imputation in American Indians.

Directory of Open Access Journals (Sweden)

Alka Malhotra

Full Text Available Genotype imputation is commonly used in genetic association studies to test untyped variants using information on linkage disequilibrium (LD with typed markers. Imputing genotypes requires a suitable reference population in which the LD pattern is known, most often one selected from HapMap. However, some populations, such as American Indians, are not represented in HapMap. In the present study, we assessed accuracy of imputation using HapMap reference populations in a genome-wide association study in Pima Indians.Data from six randomly selected chromosomes were used. Genotypes in the study population were masked (either 1% or 20% of SNPs available for a given chromosome. The masked genotypes were then imputed using the software Markov Chain Haplotyping Algorithm. Using four HapMap reference populations, average genotype error rates ranged from 7.86% for Mexican Americans to 22.30% for Yoruba. In contrast, use of the original Pima Indian data as a reference resulted in an average error rate of 1.73%.Our results suggest that the use of HapMap reference populations results in substantial inaccuracy in the imputation of genotypes in American Indians. A possible solution would be to densely genotype or sequence a reference American Indian population.

Marginal Accuracy of Castings Fabricated with Ringless Casting Investment System and Metal Ring Casting Investment System: A Comparative Study.

Science.gov (United States)

Kalavathi, M; Sachin, Bhuvana; Prasanna, B G; Shreeharsha, T V; Praveen, B; Ragher, Mallikarjuna

2016-02-01

The thermal expansion of the investment can be restricted by the metal casting ring because the thermal expansion of the ring is less than that of the investment. The ringless casting procedure is in use in clinical dentistry, though there is little scientific data to support its use in fixed partial dentures. In this study, marginal discrepancy of castings produced with the ringless casting technique and the conventional technique using the metal rings were compared. A total of 30 wax patterns were fabricated directly on a metal die. Optical stereomicroscope was used to measure the marginal discrepancy between the metal die and wax patterns. A total of 15 castings were invested using Bellavest T phosphate-bonded investment with the ringless technique and 15 were invested with the same investment with a metal ring; 30 castings were produced using a nickel-chromium ceramo-metal alloy. The internal surface of the castings was not modified and seated with finger pressure. The vertical marginal discrepancy was measured using an optical stereomicroscope at a magnification of 100x. The data obtained were statistically analyzed using students t-test (paired t-test and unpaired t-test). The castings of the ringless technique provided less vertical marginal discrepancy (240.56 ± 45.81 μ) than the castings produced with the conventional metal ring technique (281.98± 53.05 μ). The difference was statistically significant. The ringless casting technique had produced better marginal accuracy compared with conventional casting technique. Ringless casting system can be used routinely for clinical purpose.

Genetic Population Structure of the Coral Reef Sea Star Linckia laevigata in the Western Indian Ocean and Indo-West Pacific.

Directory of Open Access Journals (Sweden)

Levy Michael Otwoma

Full Text Available The coral reef sea star Linckia laevigata is common on shallow water coral reefs of the Indo-West Pacific. Its large geographic distribution and comprehensive data from previous studies makes it suitable to examine genetic differentiation and connectivity over large geographical scales. Based on partial sequences of the mitochondrial cytochrome oxidase I (COI gene this study investigates the genetic population structure and connectivity of L. laevigata in the Western Indian Ocean (WIO and compares it to previous studies in the Indo-Malay-Philippines Archipelago (IMPA. A total of 138 samples were collected from nine locations in the WIO. AMOVA revealed a low but significant ΦST-value of 0.024 for the WIO populations. In the hierarchical AMOVA, the following grouping rejected the hypothesis of panmixia: (1 Kenya (Watamu, Mombasa, Diani and Tanzanian Island populations (Misali and Jambiani and (2 the rest of the WIO sites (mainland Tanzania and Madagascar; ΦCT = 0.03. The genetic population structure was stronger and more significant (ΦST = 0.13 in the comparative analysis of WIO and IMPA populations. Three clades were identified in the haplotype network. The strong genetic differentiation (ΦCT = 0.199, P < 0.001 suggests that Indo-West Pacific populations of L. laevigata can be grouped into four biogeographic regions: (1 WIO (2 Eastern Indian Ocean (3 IMPA and (4 Western Pacific. The findings of this study support the existence of a genetic break in the Indo-West Pacific consistent with the effect of lowered sea level during the Pleistocene, which limited gene flow between the Pacific and Indian Ocean.

Effect of geographical and ethnic variation on Dysphonia Severity Index: a study of Indian population.

Science.gov (United States)

Jayakumar, T; Savithri, S R

2012-01-01

Dysphonia Severity Index (DSI) is a widely used multiparametric approach to objectively quantify the voice quality. Few research groups have investigated the test-retest, interobserver variability, and influence of age and gender. They have also verified the application of DSI in various voice rehabilitation conditions. However, all these studies have been conducted on European population. There is a possibility of variation in the basic parameters of DSI across geographical and ethnic groups. Hence, the present study evaluated DSI in Indian population. One hundred twenty voluntary participants (60 males, 60 females) who had G(0) on the Grade, Roughness, Breathiness, Aesthenia, Strain (GRBAS) scale participated in the study (age range of 18-25 years, M=21.8, standard deviation=2.7). Maximum phonation time (MPT), frequency intensity, and jitter measurements were made using CSL 4500 (Kay Elemetrics, Pine Brook, NJ). Results showed noticeable difference between Indian and European population on MPT, Highest frequency (F(0)-High), and DSI values. Significant gender difference was also observed on MPT and F(0)-High. Test-retest reliability showed >95% for all the parameters. The MPT decrement lead to a reduction in the overall DSI value in both the genders. These results of the study caution voice professionals to reinvestigate and establish their own norms for their geographical and ethnic groups. Copyright © 2012 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

Genetic admixture studies on four in situ evolved, two migrant and twenty-one ethnic populations of Tamil Nadu, south India.

Science.gov (United States)

Suhasini, G; Sonaa, E; Shila, S; Srikumari, C R; Jayaraman, G; Ramesh, A

2011-08-01

We analysed the genetic structure of ≈ 1000 samples representing 27 ethnic groups settled in Tamil Nadu, south India, derived from two linguistic families (Dravidians and Indo-Europeans) representing four religious groups (Hinduism, Islam, Christianity and Jainism) using 11 mtDNA markers. Out of 27 ethnic groups, four are in situ populations (Anglo-Indian, Labbai Muslim, Nadar Christian and south Indian Jain) and two are migrants (Gypsy and north Indian Jain) from north India to Tamil Nadu, and 21 are native ethnic groups. Six of the markers we used were monomorphic (HaeIII663, HpaI3592, AluI5176, AluI7025, AluI13262, 9-bp deletion) and five markers were polymorphic (DdeI10394, AluI10397, HinfI12308, HincII13259 and HaeIII16517). Haplogroup frequencies, genetic affinities and admixture analysis are based on the genotype data of polymorphic markers observed in these populations. Haplogroup frequencies indicate that various ethnic groups entered Tamil Nadu during different time periods. Genetic affinities and admixture estimates revealed that the ethnic groups possessing advanced knowledge of farming cluster in a branch (C), and could be the late arrived settlers as agriculture, was introduced to this region at about 5 to 3 thousand years ago. In situ ethnic groups appear to have arisen at various times as a result of the prevailing dominant socio-cultural forces. Hierarchical Hindu caste system created many ethnic groups in the history of its existence; some of them became isolated for considerable period of time. Over all, among Tamil ethnic groups, in spite of caste systems' rigidity, built in flexibility in the system in the form of hypergamy and hypogamy had allowed maternal gene flow between them.

Travelling Through Caste

OpenAIRE

Kumar, Raj

2016-01-01

With its peculiar caste system, India is considered the most stratified of all known societies in human history. This system is ‘peculiar’ as it divides human beings into higher and lower castes and this division is backed by certain religious sanctions based on the sociological concepts of ‘purity’ and ‘pollution’. While the higher caste is associated with ‘purity’, the lower caste is associated with ‘pollution’. The people of the lower castes are not allowed to undertake religious journeys ...

A Systematic Evaluation of Ultrasound-based Fetal Weight Estimation Models on Indian Population

Directory of Open Access Journals (Sweden)

Sujitkumar S. Hiwale

2017-12-01

Conclusion: We found that the existing fetal weight estimation models have high systematic and random errors on Indian population, with a general tendency of overestimation of fetal weight in the LBW category and underestimation in the HBW category. We also observed that these models have a limited ability to predict babies at a risk of either low or high birth weight. It is recommended that the clinicians should consider all these factors, while interpreting estimated weight given by the existing models.

Peroxisome proliferator activated receptor gamma polymorphism Pro12Ala in polycystic ovary syndrome (PCOS of South Indian Population

Directory of Open Access Journals (Sweden)

Raichel Jacob

2016-05-01

Conclusion: PPARγ2 gene Pro12Ala polymorphism was supposed to be susceptible genes in PCOS. The present study demonstrated that there is a statistical difference between the distributions of PPAR gamma Pro12Ala polymorphism in South Indian Population.

Validation of a modified Hindi version of the Epworth Sleepiness Scale among a North Indian population

Directory of Open Access Journals (Sweden)

Geetika Bajpai

2016-01-01

Full Text Available Background: Since a majority of population in India does not drive automobiles, one item on the Epworth Sleepiness Scale (ESS requires modification and validation. In addition, data collected by us indicated that a majority of rural and urban Indians regularly spend time in prayer/spiritual activity. The main purpose of this study was to develop a cross-cultural adaptation of the ESS for a North Indian population, in Hindi language (ESS-I. The study also provides evidence of reliability and validity of the modified version. Methodology: The subjects included were normal volunteers aged 18-75 years (Group 1 (n = 70, compared with patients with complaints of excessive daytime sleepiness, who had undergone polysomnography (Group 2 (n = 22 and patients who had undergone multiple sleep latency test (Group 3 (n = 10. The study was carried out in four phases: Translation and retranslation of the original scale with modification of item 8 (mainly addition of option of question on "while offering prayers or in spiritual activity"; reliability (test-retest (n = 30; internal consistency (using Cronbach′s alpha index (n = 102; and sensitivity to change (n = 8. Results: Group 1 showed spiritual activity as a significantly more commonly practiced activity than driving. The Cronbach′s alpha for the modified version was 0.892 (excellent, and this was not improved by removing the modified item. The alpha value for Group 1 versus Groups 2 and 3 was 0.667 and 0.892, respectively. The scale was reliable over time (test-retest, and it was sensitive to sleepiness change in patients with obstructive sleep apnea during treatment. Conclusion: The ESS-I, is comparable to the original scale. It is reliable, valid, and change-sensitive. It is proposed that the modified version can be very useful for detecting sleepiness among Indian population, especially those who do not drive their own vehicles.

Technological Aspects of Low-Alloyed Cast Steel Massive Casting Manufacturing

Directory of Open Access Journals (Sweden)

Szajnara J.

2013-12-01

Full Text Available In the paper authors have undertaken the attempt of explaining the causes of cracks net occurrence on a massive 3-ton cast steel casting with complex geometry. Material used for casting manufacturing was the low-alloyed cast steel with increased wear resistance modified with vanadium and titanium. The studies included the primary and secondary crystallization analysis with use of TDA and the qualitative and quantitative analysis of non-metallic inclusions.

Reducing the Incidence of Cast-related Skin Complications in Children Treated With Cast Immobilization.

Science.gov (United States)

Difazio, Rachel L; Harris, Marie; Feldman, Lanna; Mahan, Susan T

2017-12-01

Cast immobilization remains the mainstay of pediatric orthopaedic care, yet little is known about the incidence of cast-related skin complications in children treated with cast immobilization. The purposes of this quality improvement project were to: (1) establish a baseline rate of cast-related skin complications in children treated with cast immobilization, (2) identify trends in children who experienced cast-related skin complications, (3) design an intervention aimed at decreasing the rate of cast-related skin complications, and (4) determine the effectiveness of the intervention. A prospective interrupted time-series design was used to determine the incidence of cast-related skin complications overtime and compare the rates of skin complications before and after an intervention designed to decrease the incidence of cast-related heel complications. All consecutive patients who were treated with cast immobilization from September 2012 to September 2014 were included. A cast-related skin complications data collection tool was used to capture all cast-related skin complications. A high rate of heel events was noted in our preliminary analysis and an intervention was designed to decrease the rate of cast-related skin complications, including the addition of padding during casting and respective provider education. The estimated cast-related skin events rate for all patients was 8.9 per 1000 casts applied. The rate for the total preintervention sample was 13.6 per 1000 casts which decreased to 6.6 in the postintervention sample. When examining the heel-only group, the rate was 17.1 per 1000 lower extremity casts applied in the preintervention group and 6.8 in the postintervention group. Incorporating padding to the heel of lower extremity cast was an effective intervention in decreasing the incidence of cast-related skin complications in patients treated with cast immobilization. Level II.

American Indian Studies, Multiculturalism, and the Academic Library

Science.gov (United States)

Alexander, David L.

2013-01-01

The current status of multicultural and diversity efforts suggests the need for incorporating into the discussion of librarianship an understanding of previously underrepresented populations such as the American Indian. American Indian Studies speaks from the American Indian perspective and addresses the contemporary condition of American Indians.…

Risk factors and epidemiological profile of hip fractures in Indian population: A case-control study

Directory of Open Access Journals (Sweden)

Kaustubh Ahuja

2017-09-01

Conclusions: Hip fractures in the elderly population are on a rising trend especially in the Indian subcontinent due to a number of factors both hereditary and acquired. Simple measures like routine usage of bedside railing, wall-side railings at an appropriate height, high friction tiles inside rooms and washrooms, and adequate lighting indoors can play a significant role in reducing falls and hip fractures among the elderly.

Tibia Shaft Fractures in Adolescents: How and When Can They be Managed Successfully With Cast Treatment?

Science.gov (United States)

Ho, Christine A

2016-06-01

Despite the increasing popularity of operative treatment in adolescent tibia fractures, casting remains a viable first-line treatment. Because the selection bias in published reports does not allow direct comparison between casting and flexible nail treatment of closed pediatric tibia fractures, it is unclear whether flexible nailing offers any advantages over casting. This overview discusses parameters of acceptable alignment, indications, techniques for successful reduction and casting, subsequent inpatient and outpatient management including wedging of casted tibia fractures, expected outcomes, and comparison of casting with flexible nailing. As with any orthopaedic procedure, careful attention to patient selection, indications, and detail facilitates successful cast treatment in this older pediatric population.

Facial soft tissue thickness in North Indian adult population

Directory of Open Access Journals (Sweden)

Tanushri Saxena

2012-01-01

Full Text Available Objectives: Forensic facial reconstruction is an attempt to reproduce a likeness of facial features of an individual, based on characteristics of the skull, for the purpose of individual identification - The aim of this study was to determine the soft tissue thickness values of individuals of Bareilly population, Uttar Pradesh, India and to evaluate whether these values can help in forensic identification. Study design: A total of 40 individuals (19 males, 21 females were evaluated using spiral computed tomographic (CT scan with 2 mm slice thickness in axial sections and soft tissue thicknesses were measured at seven midfacial anthropological facial landmarks. Results: It was found that facial soft tissue thickness values decreased with age. Soft tissue thickness values were less in females than in males, except at ramus region. Comparing the left and right values in individuals it was found to be not significant. Conclusion: Soft tissue thickness values are an important factor in facial reconstruction and also help in forensic identification of an individual. CT scan gives a good representation of these values and hence is considered an important tool in facial reconstruction- This study has been conducted in North Indian population and further studies with larger sample size can surely add to the data regarding soft tissue thicknesses.

REDUCING REJECTION/REWORK IN PRESSURE DIE CASTING PROCESS BY APPLICATION OF DMAIC METHODOLOGY OF SIX SIGMA

Directory of Open Access Journals (Sweden)

Javedhusen Malek

2015-12-01

Full Text Available In today's ever-changing customer driven market, industries are needed to improve their products and processes to satisfy customer requirements. The Six Sigma approach has set a new paradigm of business excellence. Six Sigma as a process driven improvement methodology has been adopted successfully by many industries. From the review of various literatures, it is revealed that Six Sigma is well adopted in large scale enterprise but having less evidence of adoption in Indian SMEs. This paper is focused on providing path to Indian SMEs for initiating Six Sigma approach in their industries. The paper discusses the real life case where Six Sigma has been successfully applied at one of the Indian small-scale unit to improve rejection/rework rate in manufacturing products by pressure die casting process. This paper describes phase wise application of all the phases of define-measure-analyse-improve-control (DMAIC which also shows impact of Six Sigma in quality improvement.

Determination of mercury and selenium in hair samples of Brazilian Indian populations living in the Amazonic region by NAA

International Nuclear Information System (INIS)

Vasconcellos, M.B.A.; Paletti, G.; Catharino, M.G.M.; Saiki, M.; Favaro, D.I.T.; Bode, P.; Ammerlaan, A.K.; Byrne, A.R.; Baruzzi, R.; Rodrigues, D.A.

2000-01-01

Biomonitoring of mercury contamination of Brazilian Indian population groups living in the Xingu Park, a reservation situated in the Amazonic region, has revealed very high levels of mercury in hair samples as compared to controls. Total mercury was determined by INAA in most of the tribes living in the Park and methylmercury was determined by CVAAS in samples with total mercury above 10 mg/kg. Due to the fact that selenium seems to protect animals against the toxic effects of methylmercury, it was considered also of interest to determine its concentrations in the hair samples with very high mercury levels. Selenium was determined by INAA via the short-lived radionuclide 77m Se (T 1/2 = 17.45 s). The correlations between selenium and mercury concentrations in Brazilian controls and in the Indian population groups are discussed. (author)

Effect of cast steel production metallurgy on the emergence of casting defects

Directory of Open Access Journals (Sweden)

L. Čamek

2016-10-01

Full Text Available The paper documents metallurgical possibilities of high alloy cast steel production in open induction medium frequency furnaces and an electric arc furnace in a gravity die casting foundry. The observation was focused on the emergence of gas defects in steel castings. The content of gases achieved during the metallurgical processes was evaluated for every unit of the production equipment and the casting ladle before casting into disposable sand moulds. The sand mould area was considered to be constant. The aim was to evaluate the current metallurgical possibilities of affecting the content of gases in high alloy cast steel in the current technical conditions of the foundry.

SPRAY CASTING

OpenAIRE

SALAMCI, Elmas

2010-01-01

ABSTRACT This paper is designed to provide a basic review of spray casting. A brief overview of the historical development of spray  casting and the description of plant and equipment have been given. Following metallurgical characteristics of spray formed alloys, process parameters and solidification mechanism of spray deposition have been discussed in detail. Finally, microstructure and mechanical properties of the selected spray cast Al-Zn-Mg-Cu alloys have been presented and comp...

Thromboprophylaxis after Knee Arthroscopy and Lower-Leg Casting.

Science.gov (United States)

van Adrichem, Raymond A; Nemeth, Banne; Algra, Ale; le Cessie, Saskia; Rosendaal, Frits R; Schipper, Inger B; Nelissen, Rob G H H; Cannegieter, Suzanne C

2017-02-09

The use of thromboprophylaxis to prevent clinically apparent venous thromboembolism after knee arthroscopy or casting of the lower leg is disputed. We compared the incidence of symptomatic venous thromboembolism after these procedures between patients who received anticoagulant therapy and those who received no anticoagulant therapy. We conducted two parallel, pragmatic, multicenter, randomized, controlled, open-label trials with blinded outcome evaluation: the POT-KAST trial, which included patients undergoing knee arthroscopy, and the POT-CAST trial, which included patients treated with casting of the lower leg. Patients were assigned to receive either a prophylactic dose of low-molecular-weight heparin (for the 8 days after arthroscopy in the POT-KAST trial or during the full period of immobilization due to casting in the POT-CAST trial) or no anticoagulant therapy. The primary outcomes were the cumulative incidences of symptomatic venous thromboembolism and major bleeding within 3 months after the procedure. In the POT-KAST trial, 1543 patients underwent randomization, of whom 1451 were included in the intention-to-treat population. Venous thromboembolism occurred in 5 of the 731 patients (0.7%) in the treatment group and in 3 of the 720 patients (0.4%) in the control group (relative risk, 1.6; 95% confidence interval [CI], 0.4 to 6.8; absolute difference in risk, 0.3 percentage points; 95% CI, -0.6 to 1.2). Major bleeding occurred in 1 patient (0.1%) in the treatment group and in 1 (0.1%) in the control group (absolute difference in risk, 0 percentage points; 95% CI, -0.6 to 0.7). In the POT-CAST trial, 1519 patients underwent randomization, of whom 1435 were included in the intention-to-treat population. Venous thromboembolism occurred in 10 of the 719 patients (1.4%) in the treatment group and in 13 of the 716 patients (1.8%) in the control group (relative risk, 0.8; 95% CI, 0.3 to 1.7; absolute difference in risk, -0.4 percentage points; 95% CI, -1.8 to 1

TECHNOLOGICAL PARAMETERS OF SLUGS CASTING OF GREY CAST IRON BY FROSTING

Directory of Open Access Journals (Sweden)

E. I. Marukovich

2009-01-01

Full Text Available The relation of geometrical parametres of casting with technological ones is shown. The monogram for definition of basic technological parametres of obtaining of castings by the method of continuously-cyclic iterative casting by freezing-up is presented.

Colour Metallography of Cast Iron - Chapter 3: Spheroidal Graphite Cast Iron (Ⅳ

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2010-11-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron. Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron, uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditional materials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Colour Metallography of Cast Iron - Chapter 3: Spheroidal Graphite Cast Iron (Ⅰ

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2010-02-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron. Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron, uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditional materials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Colour Metallography of Cast Iron - Chapter 4: Vermicular Graphite Cast Iron (Ⅱ

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2011-05-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron. Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron, uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditional materials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Frequency of developmental dental anomalies in the Indian population.

Science.gov (United States)

Guttal, Kruthika S; Naikmasur, Venkatesh G; Bhargava, Puneet; Bathi, Renuka J

2010-07-01

To evaluate the frequency of developmental dental anomalies in the Indian population. This prospective study was conducted over a period of 1 year and comprised both clinical and radiographic examinations in oral medicine and radiology outpatient department. Adult patients were screened for the presence of dental anomalies with appropriate radiographs. A comprehensive clinical examination was performed to detect hyperdontia, talon cusp, fused teeth, gemination, concrescence, hypodontia, dens invaginatus, dens evaginatus, macro- and microdontia and taurodontism. Patients with syndromes were not included in the study. Of the 20,182 patients screened, 350 had dental anomalies. Of these, 57.43% of anomalies occurred in male patients and 42.57% occurred in females. Hyperdontia, root dilaceration, peg-shaped laterals (microdontia), and hypodontia were more frequent compared to other dental anomalies of size and shape. Dental anomalies are clinically evident abnormalities. They may be the cause of various dental problems. Careful observation and appropriate investigations are required to diagnose the condition and institute treatment.

The structure of abrasion-resisting castings made of chromium cast iron

Directory of Open Access Journals (Sweden)

D. Kopyciński

2011-01-01

Full Text Available In this study presents the analyse of chrome iron cast structure (as-cast condition which are used in rugged conditions abrasion-percussive and high temperature. While producing the casts of chrome iron major influence has been preserve the structure of technologi cal process parameters. The addition to Fe-C-Cr alloy Ni, Mo or Cu and then proper heat treatment leads to the improvement of functional and mechanical cast qualities. Then it is possible to develop high mechanical properties which are recommended by PN-EN12513. As can it be seen from the above research silicon is an adverse chemical element in this kind of alloy cast iron. However, the reason of cracksappearing in chrome iron casts are phosphorus eutectic microareas. When the compound of Si and P reach the critical point, described inPN-88/H-83144 outdated standard, the microareas might appear.

The deformation of wax patterns and castings in investment casting technology

Directory of Open Access Journals (Sweden)

A. Herman

2012-01-01

Full Text Available The dimensional accuracy of the final casting of Inconel alloy 738 LC is affected by many aspects. One of them is the choice of method and time of cooling wax model for precision investment casting. The main objective was to study the initial deformation of the complex shape of the casting of the rotor blades. Various approaches have been tested for cooling wax pattern. When wax models are cooling on the air, without clamping in jig for cooling, deviations from the ideal shape of the casting are very noticeable (up to 8 mm and most are in extreme positions of the model. When blade is cooled in fixing jig in water environment, the resulting deviations compared with cooling in air are significantly larger, sometimes up to 10 mm. This itself does not mean that the final shape of the casting is dimensionally more accurate with usage of wax models, which have deviations from the ideal position smaller. Another deformation occurs when shell mould is produced around wax pattern and furthermore deformations emerge while casting of blade is cooling. This paper demonstrates first steps in describing complex process of deformations of Inconel alloy blades produced with investment casting technology by comparing results from thermal imagery, simulations in foundry simulation software ProCAST 2010 and measurements from CNC scanning system Carl Zeiss MC 850. Conclusions are so far not groundbreaking, but it seems deformations of wax pattern and deformations of castings do in some cases cancel each other by having opposite directions. Describing entirely whole process of deformations will help increase precision of blade castings so that models at the beginning and blades in the end are the same.

Indian Diaspora In The UK

Directory of Open Access Journals (Sweden)

L. V. Kulik

2017-01-01

Full Text Available The author traces the history of formation of the Indian diaspora in the UK, evaluates the key trends that characterize the current state of diaspora. The article highlights the level of involvement and participation of diaspora in the evolution of the bilateral relations, as well as the influence of diaspora over home and foreign policy in the UK and India. The diaspora today is not just a unique vibrant connection between the two countries, it has also become a factor of influence over domestic, social and economic affairs in both the UK and India. There is a growing number of Indians among British statesmen and politicians. Indians occupy significant posts in various sectors in Britain, including business and finance. This contributes to strengthening of economic ties between the two countries, particularly important considering Britain’s forthcoming exit from the EU. As to internal political matters, though potential issues exist (those include, for instance, the possible transfer from India into Britain of problematic inter-caste relations, India’s criticism over unbalanced approach to teaching colonial history in British schools, the Indian diaspora due to its’ inherent tolerance and moderation generally plays a stabilizing role in the UK, especially on the background of radicalization of other ethnic communities. For the new India the diaspora today is not just an important source of financing, competences and know-how, it is also a significant lobbying and soft-power instrument. This article is part of a broader research, related to the contemporary relations between the United Kingdom and India. Indian diaspora in the UK is an integral part of the unique centuries-long history that connects the two countries. It is poised to remain a strong factor contributing to interdependence and cooperation between Britain and India in the XXI century.

Morphometric Evaluation of Occipital Condyles: Defining Optimal Trajectories and Safe Screw Lengths for Occipital Condyle-Based Occipitocervical Fixation in Indian Population.

Science.gov (United States)

Bosco, Aju; Venugopal, Prakash; Shetty, Ajoy Prasad; Shanmuganathan, Rajasekaran; Kanna, Rishi Mugesh

2018-04-01

Computed tomographic (CT) morphometric analysis. To assess the feasibility and safety of occipital condyle (OC)-based occipitocervical fixation (OCF) in Indians and to define anatomical zones and screw lengths for safe screw placement. Limitations of occipital squama-based OCF has led to development of two novel OC-based OCF techniques. Morphometric analysis was performed on the OCs of 70 Indian adults. The feasibility of placing a 3.5-mm-diameter screw into OCs was investigated. Safe trajectories and screw lengths for OC screws and C0-C1 transarticular screws without hypoglossal canal or atlantooccipital joint compromise were estimated. The average screw length and safe sagittal and medial angulations for OC screws were 19.9±2.3 mm, ≤6.4°±2.4° cranially, and 31.1°±3° medially, respectively. An OC screw could not be accommodated by 27% of the population. The safe sagittal angles and screw lengths for C0-C1 transarticular screw insertion (48.9°±5.7° cranial, 26.7±2.9 mm for junctional entry technique; 36.7°±4.6° cranial, 31.6±2.7 mm for caudal C1 arch entry technique, respectively) were significantly different than those in other populations. The risk of vertebral artery injury was high for the caudal C1 arch entry technique. Screw placement was uncertain in 48% of Indians due to the presence of aberrant anatomy. There were significant differences in the metrics of OC-based OCF between Indian and other populations. Because of the smaller occipital squama dimensions in Indians, OC-based OCF techniques may have a higher application rate and could be a viable alternative/salvage option in selected cases. Preoperative CT, including three-dimensional-CT-angiography (to delineate vertebral artery course), is imperative to avoid complications resulting from aberrant bony and vascular anatomy. Our data can serve as a valuable reference guide in placing these screws safely under fluoroscopic guidance.

Physical profile data from XTD and XCTD casts in the Southern Ocean from the R/V XUE LONG from 28 December 2001 to 11 March 2002 (NODC Accession 0000734)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical profile data were collected from XTD and XCTD casts in the Southeast Indian Ocean and Weddell Gyre from the R/V XUE LONG. Data were collected by...

Direct Cast U-6Nb – 2017 Progress on Cylindrical Castings

Energy Technology Data Exchange (ETDEWEB)

Aikin, Jr., Robert M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-10-04

This report describes work to further develop a sound technical basis and best practices for mold design and process parameters for the Direct Casting of U-6wt%Nb components. One major challenge to the production of U-6Nb components is the propensity for niobium segregation during casting and solidification. This is especially true for cylindrical castings where the vertical side walls allow flotation of Nb resulting in severe inverse macrosegregation. In this work, a small (120 mm diameter by 180 mm tall) and large cylinder (250 mm diameter by 310 mm tall) are examined with a focus on reducing, or eliminating, niobium segregation. It is demonstrated that counter gravity casting (top-to-bottom solidification) can be used to minimize segregation in the small cylinder. Attempts to counter gravity cast the large cylinder were unsuccessful, in large part due to size limitations of the current furnace. A path forward for casting of the large cylinders is discussed.

Prevalence and risk factors for refractive errors in the South Indian adult population: The Andhra Pradesh Eye disease study

Directory of Open Access Journals (Sweden)

Sannapaneni Krishnaiah

2008-12-01

Full Text Available Sannapaneni Krishnaiah1,2,3, Marmamula Srinivas1,2,3, Rohit C Khanna1,2, Gullapalli N Rao1,2,31L V Prasad Eye Institute, Banjara Hills, Hyderabad, India; 2International Center for Advancement of Rural Eye Care, L V Prasad Eye Institute, Banjara Hills, Hyderabad, India; 3Vision CRC, University of New South Wales, Sydney, NSW, AustraliaAim: To report the prevalence, risk factors and associated population attributable risk percentage (PAR for refractive errors in the South Indian adult population.Methods: A population-based cross-sectional epidemiologic study was conducted in the Indian state of Andhra Pradesh. A multistage cluster, systematic, stratified random sampling method was used to obtain participants (n = 10293 for this study.Results: The age-gender-area-adjusted prevalence rates in those ≥40 years of age were determined for myopia (spherical equivalent [SE] < −0.5 D 34.6% (95% confidence interval [CI]: 33.1–36.1, high-myopia (SE < −5.0 D 4.5% (95% CI: 3.8–5.2, hyperopia (SE > +0.5 D 18.4% (95% CI: 17.1–19.7, astigmatism (cylinder < −0.5 D 37.6% (95% CI: 36–39.2, and anisometropia (SE difference between right and left eyes >0.5 D 13.0% (95% CI: 11.9–14.1. The prevalence of myopia, astigmatism, high-myopia, and anisometropia significantly increased with increasing age (all p < 0.0001. There was no gender difference in prevalence rates in any type of refractive error, though women had a significantly higher rate of hyperopia than men (p < 0.0001. Hyperopia was significantly higher among those with a higher educational level (odds ratio [OR] 2.49; 95% CI: 1.51–3.95 and significantly higher among the hypertensive group (OR 1.24; 95% CI: 1.03–1.49. The severity of lens nuclear opacity was positively associated with myopia and negatively associated with hyperopia.Conclusions: The prevalence of myopia in this adult Indian population is much higher than in similarly aged white populations. These results confirm the previously

Anodization of cast aluminium alloys produced by different casting methods

Directory of Open Access Journals (Sweden)

K. Labisz

2008-08-01

Full Text Available In this paper the usability of two casting methods, of sand and high pressure cast for the anodization of AlSi12 and AlSi9Cu3 aluminium cast alloys was investigated. With defined anodization parameters like electrolyte composition and temperature, current type and value a anodic alumina surface layer was produced. The quality, size and properties of the anodic layer was investigated after the anodization of the chosen aluminium cast alloys. The Alumina layer was observed used light microscope, also the mechanical properties were measured as well the abrasive wear test was made with using ABR-8251 equipment. The researches included analyze of the influence of chemical composition, geometry and roughness of anodic layer obtained on aluminum casts. Conducted investigations shows the areas of later researches, especially in the direction of the possible, next optimization anodization process of aluminum casting alloys, for example in the range of raising resistance on corrosion to achieve a suitable anodic surface layer on elements for increasing applications in the aggressive environment for example as materials on working building constructions, elements in electronics and construction parts in air and automotive industry.

Spectrum of MTHFR gene SNPs C677T and A1298C: a study among 23 population groups of India.

Science.gov (United States)

Saraswathy, Kallur Nava; Asghar, Mohammad; Samtani, Ratika; Murry, Benrithung; Mondal, Prakash Ranjan; Ghosh, Pradeep Kumar; Sachdeva, Mohinder Pal

2012-04-01

Elevated homocysteine is a risk factor for many complex disorders. The role of methylenetetrahydrofolate reductase (MTHFR) gene in methylation of homocysteine makes it one of the most important candidate genes for these disorders. Considering the heterogeneity in its distribution in world populations, we screened MTHFR C677T and A1298C single nucleotide polymorphisms in a total of 23 Indian caste, tribal and religious population groups from five geographical regions of India and belonging to four major linguistic groups. The frequencies of MTHFR 677T and 1298C alleles were found to be 10.08 and 20.66%, respectively. MTHFR homozygous genotype 677TT was absent in eight population groups and homozygous 1298CC was absent in two population groups. 677T allele was found to be highest among north Indian populations with Indo-European tongue and 1298C was high among Dravidian-speaking tribes of east India and south India. The less common mutant haplotype 677T-1298C was observed among seven population groups and overall the frequency of this haplotype was 0.008, which is similar to that of African populations. cis configuration of 677T and 1298C was 0.94%. However, we could not find any individual with four mutant alleles which supports the earlier observation that presence of more than two mutant alleles may decrease the viability of foetus and possibly be a selective disadvantage in the population.

Cast iron - a predictable material

Directory of Open Access Journals (Sweden)

Jorg C. Sturm

2011-02-01

Full Text Available High strength compacted graphite iron (CGI or alloyed cast iron components are substituting previously used non-ferrous castings in automotive power train applications. The mechanical engineering industry has recognized the value in substituting forged or welded structures with stiff and light-weight cast iron castings. New products such as wind turbines have opened new markets for an entire suite of highly reliable ductile iron cast components. During the last 20 years, casting process simulation has developed from predicting hot spots and solidification to an integral assessment tool for foundries for the entire manufacturing route of castings. The support of the feeding related layout of the casting is still one of the most important duties for casting process simulation. Depending on the alloy poured, different feeding behaviors and self-feeding capabilities need to be considered to provide a defect free casting. Therefore, it is not enough to base the prediction of shrinkage defects solely on hot spots derived from temperature fields. To be able to quantitatively predict these defects, solidification simulation had to be combined with density and mass transport calculations, in order to evaluate the impact of the solidification morphology on the feeding behavior as well as to consider alloy dependent feeding ranges. For cast iron foundries, the use of casting process simulation has become an important instrument to predict the robustness and reliability of their processes, especially since the influence of alloying elements, melting practice and metallurgy need to be considered to quantify the special shrinkage and solidification behavior of cast iron. This allows the prediction of local structures, phases and ultimately the local mechanical properties of cast irons, to asses casting quality in the foundry but also to make use of this quantitative information during design of the casting. Casting quality issues related to thermally driven

Hepatic steatosis is associated with cardiometabolic risk in a rural Indian population: A prospective cohort study.

Science.gov (United States)

Barik, Anamitra; Shah, Ravi V; Spahillari, Aferdita; Murthy, Venkatesh L; Ambale-Venkatesh, Bharath; Rai, Rajesh Kumar; Das, Kaushik; Santra, Amal; Hembram, Jaba Ranjan; Bhattacharya, Dilip; Freedman, Jane E; Lima, Joao; Das, Ranendra; Bhattacharyya, Pinakpani; Das, Saumya; Chowdhury, Abhijit

2016-12-15

While adiposity and hepatic steatosis are linked to cardiovascular risk in developed countries, their prevalence and impact in low-income countries are poorly understood. We investigated the association of anthropomorphic variables and hepatic steatosis with cardiometabolic risk profiles and subclinical cardiovascular disease (CVD) in a large rural Indian cohort. In 4691 individuals in the Birbhum Population Project in West Bengal, India, we performed liver ultrasonography, carotid ultrasound and biochemical and clinical profiling. We assessed the association of hepatic steatosis and anthropomorphic indices (BMI, waist circumference) with CVD risk factors (dysglycemia, dyslipidemia, hypertension) and subclinical CVD (by carotid intimal-medial thickness). Rural Indians exhibited a higher visceral adiposity index and pro-atherogenic dyslipidemia at a lower BMI than Americans. Individuals with any degree of hepatic steatosis by ultrasound had a greater probability of dysglycemia (adjusted odds ratio, OR=1.67, 95% CI 1.31-2.12, P<0.0001) and pro-atherogenic dyslipidemia (OR=1.33, 95% CI 1.07-1.63, P=0.009). We observed a positive association between liver fat, adiposity and carotid intimal-medial thickness (CIMT) in an unadjusted model (β=0.02, P=0.0001); the former was extinguished after adjustment for cardiometabolic risk factors. In a large population of rural Indians, hepatic steatosis and waist circumference were associated with prevalent cardiometabolic risk and subclinical CVD at lower BMI relative to multi-ethnic Americans, though the association of the former with subclinical CVD was extinguished after adjustment. These results underscore the emerging relevance of hepatic steatosis and adiposity in the developing world, and suggest efforts to target these accessible phenotypes for cardiometabolic risk prevention. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Temporary Efficacy of Pyrimethamine in Juvenile-Onset Tay-Sachs Disease Caused by 2 Unreported HEXA Mutations in the Indian Population.

Science.gov (United States)

Udwadia-Hegde, Anaita; Hajirnis, Omkar

2017-01-01

Juvenile Tay-Sachs disease is rarer than other forms of Tay-Sachs disease and is usually seen in children between the age of 2 and 10 years. Pyrimethamine as a pharmacological chaperone was used to increase β-hexosaminidase A activity in this patient. We describe a patient with Tay-Sachs disease from the Indian population, a juvenile case who presented with developmental regression starting at the age of three, initially with motor followed by language regression. She is currently incapacitated with severe behavioral issues. This brief communication gives an insight into the efficacy of pharmacological chaperones. It also describes two unreported mutations in hexosaminidase A gene from the Indian population. After commencing Pyrimethamine, though initial benefits with increase in levels corresponded with briefly halting the motor regression, the observed increase was only transient and not associated with discernible beneficial neurological or psychiatric effects.

Dimensional control of die castings

Science.gov (United States)

Karve, Aniruddha Ajit

The demand for net shape die castings, which require little or no machining, is steadily increasing. Stringent customer requirements are forcing die casters to deliver high quality castings in increasingly short lead times. Dimensional conformance to customer specifications is an inherent part of die casting quality. The dimensional attributes of a die casting are essentially dependent upon many factors--the quality of the die and the degree of control over the process variables being the two major sources of dimensional error in die castings. This study focused on investigating the nature and the causes of dimensional error in die castings. The two major components of dimensional error i.e., dimensional variability and die allowance were studied. The major effort of this study was to qualitatively and quantitatively study the effects of casting geometry and process variables on die casting dimensional variability and die allowance. This was accomplished by detailed dimensional data collection at production die casting sites. Robust feature characterization schemes were developed to describe complex casting geometry in quantitative terms. Empirical modeling was utilized to quantify the effects of the casting variables on dimensional variability and die allowance for die casting features. A number of casting geometry and process variables were found to affect dimensional variability in die castings. The dimensional variability was evaluated by comparisons with current published dimensional tolerance standards. The casting geometry was found to play a significant role in influencing the die allowance of the features measured. The predictive models developed for dimensional variability and die allowance were evaluated to test their effectiveness. Finally, the relative impact of all the components of dimensional error in die castings was put into perspective, and general guidelines for effective dimensional control in the die casting plant were laid out. The results of

Utilizing linkage disequilibrium information from Indian Genome ...

Indian Academy of Sciences (India)

Using LD information derived from Indian Genome Variation database (IGVdb) on populations .... Line diagram represents the SNPs selected in Indian (upper panel) and CEPH .... out procedure for extracting DNA from human nucleated cells.

Population genetics and conservation strategies for the West Indian manatee (Trichechus manatus Linnaeaus,1758) in Brazil

OpenAIRE

Luna, Fábia de Oliveira

2013-01-01

The West Indian manatee (Trichechus manatus) and the Amazonian manatee (Trichechus inunguis) belong to the mammalian Order Sirenia, classified respectively as critically endangered and as vulnerable in Brazil. Both species have been hunted commercially since the sixteenth century, resulting in a drastic reduction or elimination of manatees in some places. This hunting pressure may have caused isolation of the populations resulting in geographic genetic isolation, with a reduction of their gen...

Demography, genetic diversity, and population relationships among Argentinean Mapuche Indians

Directory of Open Access Journals (Sweden)

Alicia S. Goicoechea

2000-09-01

Full Text Available Fertility, mortality and migration data from four Mapuche Indian communities located along a 215-km NE-SW linear area in the Province of Río Negro, Argentina, were collated with genetic information furnished by nine blood group systems and by mtDNA haplogroups. The demographic and genetic data indicated a clear dichotomy, which split the four populations into two groups of two. Differing degrees of non-Indian exchanges was probably the main determining factor for this separation. Total genetic variability was very similar in all groups, and the interpopulational variability accounted for only 10% of the total variability. A low prevalence of the Diego(a antigen among the Mapuche was confirmed. The fact that significant genetic heterogeneity and population clusters were found in such a small territorial region attests to the sensitivity of demographic and genetic approaches in unraveling human history.Dados relativos a fertilidade, mortalidade e migração de quatro comunidades de índios Mapuche localizadas em uma área linear na direção nordeste-sudoeste com 215 km de extensão na Província de Rio Negro, Argentina, foram associados com a informação genética fornecida por nove sistemas de grupos sangüíneos e os haplogrupos do DNA mitocondrial. Ambos os tipos de informação apontam claramente para uma dicotomia, as quatro populações sendo divididas em grupos de duas. O principal fator responsável por esta separação é provavelmente graus diferentes de mistura com não-índios. A variabilidade genética total foi muito similar em todos os grupos, aquela entre populações sendo de apenas 10% deste valor. Foi confirmada a baixa prevalência do antígeno Diego(a entre os Mapuche. O fato de que heterogeneidade genética significativa e conjuntos populacionais diversos foram observados em uma região territorial tão pequena demonstra a sensibilidade dos enfoques demográfico e genético no esclarecimento da história humana.

Morphology of Sigmoid Colon in South Indian Population: A Cadaveric Study.

Science.gov (United States)

Michael, Stelin Agnes; Rabi, Suganthy

2015-08-01

Sigmoid volvulus is a common etiological factor in acute large bowel obstruction. The increased length of sigmoid colon is attributed as one of the causes of sigmoid volvulus. The aim of this study was to find the morphology of sigmoid colon in South Indian population using cadavers. The present study was performed with 31 cadavers used for teaching purpose. The sigmoid colon was classified into classical, long-narrow and long- broad types by their disposition in the abdominal cavity. The sigmoid loop's relation to pelvic brim was also observed and grouped as pelvic and suprapelvic in position. The length of sigmoid colon along the mesenteric and antimesenteric border, height and width of sigmoid mesocolon in relation to the pelvic brim and the root of mesentery were measured in the study. The study showed that the majority of the sigmoid colons fell into the classical type (47.6%). The sigmoid colon in pelvic position was significantly more prevalent. The mean length of sigmoid colon was 15.2 ± 4.4cm and 19.2 ± 6cm considering the pelvic brim and root of mesentery as reference points of measurement respectively. The mean length along antimesenteric border was 22.3 ± 7.9cm and 25 ± 8.7cm along the same reference points. The mean length of mesocolon height was 6.5 ± 3cm with reference to pelvic brim and 7.3 ± 3cm with reference to root of Sigmoid mesocolon respectively. The mean width of mesocolon was 7.4 ± 3cm (pelvic brim) and 8 ± 2cm (root of Sigmoid mesocolon) There was a positive correlation of sigmoid colon length with the height of the mesocolon. The gender analysis showed that males had statistically significant longer sigmoid colon and mesocolon. This study documents that the South Indian population has a more classical type of sigmoid colon and that the anatomical dimensions of sigmoid colon and its mesocolon is significantly longer in males.

Compound cast product and method for producing a compound cast product

Science.gov (United States)

Meyer, Thomas N.; Viswanathan, Srinath

2002-09-17

A compound cast product is formed in a casting mold (14) having a mold cavity (16) sized and shaped to form the cast product. A plurality of injectors (24) is supported from a bottom side (26) of the casting mold (14). The injectors (24) are in fluid communication with the mold cavity (16) through the bottom side (26) of the casting mold (14). A molten material holder furnace (12) is located beneath the casting mold (14). The holder furnace (12) defines molten material receiving chambers (36) configured to separately contain supplies of two different molten materials (37, 38). The holder furnace (12) is positioned such that the injectors (24) extend downward into the receiving chamber (36). The receiving chamber (36) is separated into at least two different flow circuits (51, 52). A first molten material (37) is received in a first flow circuit (51), and a second molten material (38) is received into a second flow circuit (52). The first and second molten materials (37, 38) are injected into the mold cavity (16) by the injectors (24) acting against the force of gravity. The injectors (24) are positioned such that the first and second molten materials (37, 38) are injected into different areas of the mold cavity (16). The molten materials (37, 38) are allowed to solidify and the resulting compound cast product is removed from the mold cavity (16).

Multi-layers castings

Directory of Open Access Journals (Sweden)

J. Szajnar

2010-01-01

Full Text Available In paper is presented the possibility of making of multi-layers cast steel castings in result of connection of casting and welding coating technologies. First layer was composite surface layer on the basis of Fe-Cr-C alloy, which was put directly in founding process of cast carbon steel 200–450 with use of preparation of mould cavity method. Second layer were padding welds, which were put with use of TIG – Tungsten Inert Gas surfacing by welding technology with filler on Ni matrix, Ni and Co matrix with wolfram carbides WC and on the basis on Fe-Cr-C alloy, which has the same chemical composition with alloy, which was used for making of composite surface layer. Usability for industrial applications of surface layers of castings were estimated by criterion of hardness and abrasive wear resistance of type metal-mineral.

Temporary Efficacy of Pyrimethamine in Juvenile-Onset Tay-Sachs Disease Caused by 2 Unreported HEXA Mutations in the Indian Population

Directory of Open Access Journals (Sweden)

Anaita Udwadia-Hegde MD, DCH, MRCPCH

2017-01-01

Full Text Available Background: Juvenile Tay-Sachs disease is rarer than other forms of Tay-Sachs disease and is usually seen in children between the age of 2 and 10 years. Pyrimethamine as a pharmacological chaperone was used to increase β-hexosaminidase A activity in this patient. Patient: We describe a patient with Tay-Sachs disease from the Indian population, a juvenile case who presented with developmental regression starting at the age of three, initially with motor followed by language regression. She is currently incapacitated with severe behavioral issues. Conclusion: This brief communication gives an insight into the efficacy of pharmacological chaperones. It also describes two unreported mutations in hexosaminidase A gene from the Indian population. After commencing Pyrimethamine, though initial benefits with increase in levels corresponded with briefly halting the motor regression, the observed increase was only transient and not associated with discernible beneficial neurological or psychiatric effects.

Indian Ocean Near Real-Time Temperature Profile Data from the GTSPP project from 01 January 2001 to 31 December 2001 (NODC Accession 0000738)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical data were collected from XBT casts from the Indian Ocean. Data were collected from 01 January 2001 to 31 December 2001. Data were submitted by the...

Indian Ocean Near Real-Time Temperature Profile Data from the GTSPP project from 01 January 2000 to 31 December 2000 (NODC Accession 0000584)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical data were collected from XBT casts from the Indian Ocean. Data were collected from 01 January 2000 to 31 December 2000. Data were submitted by the...

Indian Ocean Near Real-Time Temperature Profile Data from the GTSPP project from 31 December 1993 to 07 January 1994 (NODC Accession 0000750)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical data were collected from XBT casts from the Indian Ocean. Data were collected from 31 December 1993 to 07 January 1994. Data were submitted by the...

Indian Ocean Near Real-Time Temperature Profile Data from the GTSPP project from 01 January 2002 to 31 December 2002 (NODC Accession 0000869)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical data were collected from XBT casts from the Indian Ocean. Data were collected from 01 January 2002 to 31 December 2002. Data were submitted by the...

Significance of the new ICRP dose limits in the Indian context

International Nuclear Information System (INIS)

Mehta, S.K.

1993-01-01

The ICRP estimates the risk quantities using the primary risk coefficients from the results of Japanese survivor studies (with DDREF of 2) along with the all-causes mortality and survival probabilities of the Swedish population. In the present work, risk quantities have been computed using the ICRP estimates of the attributable conditional cancer death probability rates for different exposure levels along with the survival probabilities of the Indian population from the official Indian life tables. For this purpose the parameters of the latest Indian life tables are extrapolated beyond the highest tabulated age of 70 years by 'logit transformation' using the parameters of the complete Indian life table to age 100 years for the period 1951-60 as standard. The results of the present work show that the Indian and the Swedish-ICRP risk quantity estimates are consistent as a function of the life expectancies of the populations and that the Swedish-ICRP risk quantity estimates contain safety factors of about 2 in the Indian context. (author)

Replication of 13 obesity loci among Singaporean Chinese, Malay and Asian-Indian populations.

Science.gov (United States)

Dorajoo, R; Blakemore, A I F; Sim, X; Ong, R T-H; Ng, D P K; Seielstad, M; Wong, T-Y; Saw, S-M; Froguel, P; Liu, J; Tai, E-S

2012-01-01

Recent genome-wide association studies (GWAS) have identified 38 obesity-associated loci among European populations. However, their contribution to obesity in other ethnicities is largely unknown. We utilised five GWAS (N=10 482) from Chinese (three cohorts, including one with type 2 diabetes and another one of children), Malay and Indian ethnic groups from Singapore. Data sets were analysed individually and subsequently in combined meta-analysis for Z-score body-mass index (BMI) associations. Variants at the FTO locus showed the strongest associations with BMI Z-score after meta-analysis (P-values 1.16 × 10(-7)-7.95 × 10(-7)). We further detected associations with nine other index obesity variants close to the MC4R, GNPDA2, TMEM18, QPCTL/GIPR, BDNF, ETV5, MAP2K5/SKOR1, SEC16B and TNKS/MSRA loci (meta-analysis P-values ranging from 3.58 × 10(-4)-1.44 × 10(-2)). Three other single-nucleotide polymorphisms (SNPs) from CADM2, PTBP2 and FAIM2 were associated with BMI (P-value ≤ 0.0418) in at least one dataset. The neurotrophin/TRK pathway (P-value=0.029) was highlighted by pathway-based analysis of loci that had statistically significant associations among Singaporean populations. Our data confirm the role of FTO in obesity predisposition among Chinese, Malays and Indians, the three major Asian ethnic groups. We additionally detected associations for 12 obesity-associated SNPs among Singaporeans. Thus, it is likely that Europeans and Asians share some of the genetic predisposition to obesity. Furthermore, the neurotrophin/TRK signalling may have a central role for common obesity among Asians.

Oceanographic profile temperature, salinity, oxygen, and nutrients measurements collected using bottle from the Iselin Columbus in the Indian Ocean (Somalia Coast) (NODC Accession 0002225)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and nutrients data were collected using bottle casts from the COLUMBUS ISELIN in the Indian Ocean. Data were collected from 26 February 1979 to...

Accuracy of single-abutment digital cast obtained using intraoral and cast scanners.

Science.gov (United States)

Lee, Jae-Jun; Jeong, Ii-Do; Park, Jin-Young; Jeon, Jin-Hun; Kim, Ji-Hwan; Kim, Woong-Chul

2017-02-01

Scanners are frequently used in the fabrication of dental prostheses. However, the accuracy of these scanners is variable, and little information is available. The purpose of this in vitro study was to compare the accuracy of cast scanners with that of intraoral scanners by using different image impression techniques. A poly(methyl methacrylate) master model was fabricated to replicate a maxillary first molar single-abutment tooth model. The master model was scanned with an accurate engineering scanner to obtain a true value (n=1) and with 2 intraoral scanners (CEREC Bluecam and CEREC Omnicam; n=6 each). The cast scanner scanned the master model and duplicated the dental stone cast from the master model (n=6). The trueness and precision of the data were measured using a 3-dimensional analysis program. The Kruskal-Wallis test was used to compare the different sets of scanning data, followed by a post hoc Mann-Whitney U test with a significance level modified by Bonferroni correction (α/6=.0083). The type 1 error level (α) was set at .05. The trueness value (root mean square: mean ±standard deviation) was 17.5 ±1.8 μm for the Bluecam, 13.8 ±1.4 μm for the Omnicam, 17.4 ±1.7 μm for cast scanner 1, and 12.3 ±0.1 μm for cast scanner 2. The differences between the Bluecam and the cast scanner 1 and between the Omnicam and the cast scanner 2 were not statistically significant (P>.0083), but a statistically significant difference was found between all the other pairs (POmnicam, 9.2 ±1.2 μm for cast scanner 1, and 6.9 ±2.6 μm for cast scanner 2. The differences between Bluecam and Omnicam and between Omnicam and cast scanner 1 were not statistically significant (P>.0083), but there was a statistically significant difference between all the other pairs (POmnicam in video image impression had better trueness than a cast scanner but with a similar level of precision. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by

Indian Ocean Near Real-Time Temperature Profile Data from the GTSPP project from 31 July 1991 to 20 August 1991 (NODC Accession 0000749)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical data were collected from XBT casts from the Indian Ocean. Data were collected from 31 July 1991 to 20 August 1991. Data were submitted by the Commonwealth...

Indian Ocean Near Real-Time Temperature Profile Data from the GTSPP project from 31 December 1989 to 31 July 1990 (NODC Accession 0000748)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical data were collected from XBT casts from the Indian Ocean. Data were collected from 31 December 1989 to 31 July 1990. Data were submitted by the Commonwealth...

Indian Ocean Near Real-Time Temperature Profile Data from the GTSPP project from 28 September 1998 to 02 October 1998 (NODC Accession 0000583)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical data were collected from XBT casts from the Indian Ocean. Data were collected from 28 September 1998 to 02 October 1998. Data were submitted by the Atlantic...

Phylogeography of mtDNA haplogroup R7 in the Indian peninsula

Directory of Open Access Journals (Sweden)

Shukla Parul

2008-08-01

Full Text Available Abstract Background Human genetic diversity observed in Indian subcontinent is second only to that of Africa. This implies an early settlement and demographic growth soon after the first 'Out-of-Africa' dispersal of anatomically modern humans in Late Pleistocene. In contrast to this perspective, linguistic diversity in India has been thought to derive from more recent population movements and episodes of contact. With the exception of Dravidian, which origin and relatedness to other language phyla is obscure, all the language families in India can be linked to language families spoken in different regions of Eurasia. Mitochondrial DNA and Y chromosome evidence has supported largely local evolution of the genetic lineages of the majority of Dravidian and Indo-European speaking populations, but there is no consensus yet on the question of whether the Munda (Austro-Asiatic speaking populations originated in India or derive from a relatively recent migration from further East. Results Here, we report the analysis of 35 novel complete mtDNA sequences from India which refine the structure of Indian-specific varieties of haplogroup R. Detailed analysis of haplogroup R7, coupled with a survey of ~12,000 mtDNAs from caste and tribal groups over the entire Indian subcontinent, reveals that one of its more recently derived branches (R7a1, is particularly frequent among Munda-speaking tribal groups. This branch is nested within diverse R7 lineages found among Dravidian and Indo-European speakers of India. We have inferred from this that a subset of Munda-speaking groups have acquired R7 relatively recently. Furthermore, we find that the distribution of R7a1 within the Munda-speakers is largely restricted to one of the sub-branches (Kherwari of northern Munda languages. This evidence does not support the hypothesis that the Austro-Asiatic speakers are the primary source of the R7 variation. Statistical analyses suggest a significant correlation between

Functional anatomy of the footpad vasculature of dogs: scanning electron microscopy of vascular corrosion casts.

Science.gov (United States)

Ninomiya, Hiroyoshi; Akiyama, Emi; Simazaki, Kanae; Oguri, Atsuko; Jitsumoto, Momoko; Fukuyama, Takaaki

2011-12-01

Dogs are well adapted to cold climates and they can stand, walk and run on snow and ice for long periods of time. In contrast to the body trunk, which has, dense fur, the paws are more exposed to the cold due to the lack of fur insulation. The extremities have a high surface area-to-volume ratio, so they lose heat very easily. We offer anatomical evidence for a heat-conserving structure associated with dog footpad vasculature. Methylmethacrylate vascular corrosion casts for scanning electron microscopy, Indian ink-injected whole-mount and histological specimens were each prepared, in a series of 16 limbs from four adult dogs. Vascular casts and Indian ink studies showed that abundant venules were arranged around the arteries supplying the pad surface and formed a vein-artery-vein triad, with the peri-arterial venous network intimately related to the arteries. In addition, numerous arteriovenous anastomoses and well-developed venous plexuses were found throughout the dermal vasculature. The triad forms a counter-current heat exchanger. When the footpad is exposed to a cold environment, the counter-current heat exchanger serves to prevent heat loss by recirculating heat back to the body core. Furthermore, the arteriovenous anastomoses shift blood flow, draining blood to the skin surface, and the venous plexuses retain warm blood in the pad surface. Hence, the appropriate temperature for the footpad can be maintained in cold environments. © 2011 The Authors. Veterinary Dermatology. © 2011 ESVD and ACVD.

Asian population frequencies and haplotype distribution of killer cell immunoglobulin-like receptor (KIR) genes among Chinese, Malay, and Indian in Singapore.

Science.gov (United States)

Lee, Yi Chuan; Chan, Soh Ha; Ren, Ee Chee

2008-11-01

Killer cell immunoglobulin-like receptors (KIR) gene frequencies have been shown to be distinctly different between populations and contribute to functional variation in the immune response. We have investigated KIR gene frequencies in 370 individuals representing three Asian populations in Singapore and report here the distribution of 14 KIR genes (2DL1, 2DL2, 2DL3, 2DL4, 2DL5, 2DS1, 2DS2, 2DS3, 2DS4, 2DS5, 3DL1, 3DL2, 3DL3, 3DS1) with two pseudogenes (2DP1, 3DP1) among Singapore Chinese (n = 210); Singapore Malay (n = 80), and Singapore Indian (n = 80). Four framework genes (KIR3DL3, 3DP1, 2DL4, 3DL2) and a nonframework pseudogene 2DP1 were detected in all samples while KIR2DS2, 2DL2, 2DL5, and 2DS5 had the greatest significant variation across the three populations. Fifteen significant linkage patterns, consistent with associations between genes of A and B haplotypes, were observed. Eighty-four distinct KIR profiles were determined in our populations, 38 of which had not been described in other populations. KIR haplotype studies were performed using nine Singapore Chinese families comprising 34 individuals. All genotypes could be resolved into corresponding pairs of existing haplotypes with eight distinct KIR genotypes and eight different haplotypes. The haplotype A2 with frequency of 63.9% was dominant in Singapore Chinese, comparable to that reported in Korean and Chinese Han. The A haplotypes predominate in Singapore Chinese, with ratio of A to B haplotypes of approximately 3:1. Comparison with KIR frequencies in other populations showed that Singapore Chinese shared similar distributions with Chinese Han, Japanese, and Korean; Singapore Indian was found to be comparable with North Indian Hindus while Singapore Malay resembled the Thai.

Clean Metal Casting

Energy Technology Data Exchange (ETDEWEB)

Makhlouf M. Makhlouf; Diran Apelian

2002-02-05

The objective of this project is to develop a technology for clean metal processing that is capable of consistently providing a metal cleanliness level that is fit for a given application. The program has five tasks: Development of melt cleanliness assessment technology, development of melt contamination avoidance technology, development of high temperature phase separation technology, establishment of a correlation between the level of melt cleanliness and as cast mechanical properties, and transfer of technology to the industrial sector. Within the context of the first task, WPI has developed a standardized Reduced Pressure Test that has been endorsed by AFS as a recommended practice. In addition, within the context of task1, WPI has developed a melt cleanliness sensor based on the principles of electromagnetic separation. An industrial partner is commercializing the sensor. Within the context of the second task, WPI has developed environmentally friendly fluxes that do not contain fluorine. Within the context of the third task, WPI modeled the process of rotary degassing and verified the model predictions with experimental data. This model may be used to optimize the performance of industrial rotary degassers. Within the context of the fourth task, WPI has correlated the level of melt cleanliness at various foundries, including a sand casting foundry, a permanent mold casting foundry, and a die casting foundry, to the casting process and the resultant mechanical properties. This is useful in tailoring the melt cleansing operations at foundries to the particular casting process and the desired properties of cast components.

Caste System

OpenAIRE

Hoff, Karla

2016-01-01

In standard economics, individuals are rational actors and economic forces undermine institutions that impose large inefficiencies. The persistence of the caste system is evidence of the need for psychologically more realistic models of decision-making in economics. The caste system divides South Asian society into hereditary groups whose lowest ranks are represented as innately polluted. ...

SLIP CASTING METHOD

Science.gov (United States)

Allison, A.G.

1959-09-01

S>A process is described for preparing a magnesium oxide slip casting slurry which when used in conjunction with standard casting techniques results in a very strong "green" slip casting and a fired piece of very close dimensional tolerance. The process involves aging an aqueous magnestum oxide slurry, having a basic pH value, until it attains a specified critical viscosity at which time a deflocculating agent is added without upsetting the basic pH value.

Gating Systems for Sizeable Castings from Al Alloys Cast into Ceramic Moulds

Directory of Open Access Journals (Sweden)

I. Stachovec

2012-04-01

Full Text Available In contrast to casting to conventional non-reusable “sand” moulds, for which calculating technique for an optimum design of the gating system is comparatively well-developed, a trial-and-error method is applied mostly for casting to ceramic shell moulds made by the investment casting technology. A technologist selects from gating systems of several types (that are standardized by the foundry mostly on the basis of experience. However, this approach is not sustainable with ever growing demands on quality of castings and also the economy of their fabrication as well as with new types of complex sizeable castings introduced to the production gradually (by new customers from the aircraft industry above all any more. The simulation software may be used as a possible tool for making the process of optimising gating systems more effective.

Diffusion of C and Cr During Creation of Surface Layer on Cast Steel Casting

Directory of Open Access Journals (Sweden)

Szajnar J.

2014-10-01

Full Text Available In paper a method of improvement in utility properties of unalloyed cast steel casting in result of diffusion of C and Cr in process of creation of surface layer is presented. The aim of paper was determination of diffusion range of basic elements of alloyed surface layer. Moreover a quantitative analysis of carbides phase strengthens alloyed surface layer of casting was carried out. The results of studies shown that important factors of surface layer creation are maximal temperature Tmax on granular insert – cast steel boundary dependent of pouring temperature, granularity Zw of Fe-Cr-C alloy insert and thickness of casting wall gśo. On the basis of obtained results was affirmed that with increase of thickness of casting wall increases range of diffusion in solid state in Fe-Cr-C grains and in liquid state. Moreover the range of Tmax = 13001500oC favours creation of the proper alloyed surface layers on cast steel.

Field populations of native Indian honey bees from pesticide intensive agricultural landscape show signs of impaired olfaction

OpenAIRE

Priyadarshini Chakrabarti; Santanu Rana; Sreejata Bandopadhyay; Dattatraya G. Naik; Sagartirtha Sarkar; Parthiba Basu

2015-01-01

Little information is available regarding the adverse effects of pesticides on natural honey bee populations. This study highlights the detrimental effects of pesticides on honey bee olfaction through behavioural studies, scanning electron microscopic imaging of antennal sensillae and confocal microscopic studies of honey bee brains for calcium ions on Apis cerana, a native Indian honey bee species. There was a significant decrease in proboscis extension response and biologically active free ...

Blood thiamin status and determinants in the population of Seychelles (Indian Ocean).

Science.gov (United States)

Bovet, P; Larue, D; Fayol, V; Paccaud, F

1998-04-01

Micronutrient deficiencies have become rare in industrialised countries as availability of fresh food, supplementation, and fortification have improved but a less favourable situation may still prevail in many developing countries. Blood thiamin status and determinants were therefore investigated in the Seychelles in view of the high incidence of dilated cardiomyopathy and as the staple diet is polished rice that is deficient in thiamin. This was a cross sectional population study using an age and sex stratified random sample. Seychelles Islands (Indian Ocean). A subsample of 206 subjects aged 25-64 years from the population of Seychelles. Measurement of total thiamin concentration in whole blood using high performance liquid chromatography. Dietary variables measured using a face to face semi-quantitative food questionnaire. Mean (SD) whole blood thiamin concentration was 77.9 (22.4) nmol/l and low concentration (< 70 nmol/l) was found in 37% of the subjects (95% CI: 31%, 44%). Blood thiamin was significantly related to education and diet but not to age, sex, smoking, and body mass index. Blood thiamin was associated positively with meat, vegetable, salad, and tea intake and negatively with alcohol and fish intake. However, no combination of the examined variables could explain more than 15% of the observed variance in blood thiamin values. These data suggest that the distribution of blood thiamin in the sampled population is shifted to lower values compared with that generally accepted as normal in European populations. Further research should establish the significance of such lower values in this specific population to facilitate clinical and public health action as necessary.

Genome-wide analysis in Brazilian Xavante Indians reveals low degree of admixture.

Science.gov (United States)

Kuhn, Patricia C; Horimoto, Andréa R V Russo; Sanches, José Maurício; Vieira Filho, João Paulo B; Franco, Luciana; Fabbro, Amaury Dal; Franco, Laercio Joel; Pereira, Alexandre C; Moises, Regina S

2012-01-01

Characterization of population genetic variation and structure can be used as tools for research in human genetics and population isolates are of great interest. The aim of the present study was to characterize the genetic structure of Xavante Indians and compare it with other populations. The Xavante, an indigenous population living in Brazilian Central Plateau, is one of the largest native groups in Brazil. A subset of 53 unrelated subjects was selected from the initial sample of 300 Xavante Indians. Using 86,197 markers, Xavante were compared with all populations of HapMap Phase III and HGDP-CEPH projects and with a Southeast Brazilian population sample to establish its population structure. Principal Components Analysis showed that the Xavante Indians are concentrated in the Amerindian axis near other populations of known Amerindian ancestry such as Karitiana, Pima, Surui and Maya and a low degree of genetic admixture was observed. This is consistent with the historical records of bottlenecks experience and cultural isolation. By calculating pair-wise F(st) statistics we characterized the genetic differentiation between Xavante Indians and representative populations of the HapMap and from HGDP-CEPH project. We found that the genetic differentiation between Xavante Indians and populations of Ameridian, Asian, European, and African ancestry increased progressively. Our results indicate that the Xavante is a population that remained genetically isolated over the past decades and can offer advantages for genome-wide mapping studies of inherited disorders.

Indian Academy of Sciences Conference Series | Indian Academy of ...

Indian Academy of Sciences (India)

Home; Journals; Indian Academy of Sciences Conference Series; Volume 1; Issue 1. Missing cycles: Effect of climate change on population dynamics. JANAKI BALAKRISHNAN SUDHARSANA V IYENGAR JÜRGEN KURTHS. Proceedings of the Conference on Perspectives in Nonlinear Dynamics - 2016 Volume 1 Issue 1 ...

Estuarine fish biodiversity of Socotra Island (N.W. Indian Ocean): from the fish community to the functioning of Terapon jarbua populations

OpenAIRE

Lavergne, Edouard

2012-01-01

Understanding connectivity between estuarine nurseries and marine habitats is fundamental to explore fish population dynamics and to the design of effective conservation and fisheries management strategies. The aim of this work was to provide the first faunistic and ecological baseline of Socotra Island (North-Western Indian Ocean) estuaries and lagoon fishes for governmental coastal managers and decision makers, with a particular focus on the population functioning of a sentinel species: Ter...

Multiscale modeling for the prediction of casting defects in investment cast aluminum alloys

International Nuclear Information System (INIS)

Hamilton, R.W.; See, D.; Butler, S.; Lee, P.D.

2003-01-01

Macroscopic modeling of heat transfer and fluid flow is now routinely used for the prediction of macroscopic defects in castings, while microscopic models are used to investigate the effects of alloy changes on typical microstructures. By combining these two levels of modeling it is possible to simulate the casting process over a wider range of spatial and temporal scales. This paper presents a multiscale model where micromodels for dendrite arm spacing and microporosity are incorporated into a macromodel of heat transfer and in order to predict the as cast microstructure and prevalence of microscopic defects, specifically porosity. The approach is applied to aluminum alloy (L169) investment castings. The models are compared with results obtained by optical image analysis of prepared slices, and X-ray tomography of volume samples from the experiments. Multiscale modeling is shown to provide the designer with a useful tool to improve the properties of the final casting by testing how altering the casting process affects the final microstructure including porosity

[The surface roughness analysis of the titanium casting founding by a new titanium casting investment material].

Science.gov (United States)

Liang, Qin-ye; Wu, Xia-yi; Lin, Xue-feng

2012-04-01

To investigate the surface roughness property of the titanium castings cast in a new investment for titanium casting. Six wax patterns (20 mm × 20 mm × 0.5 mm) were invested using two investments: three in a new titanium investment material and three in the control material (Rematitan Plus). Six titanium specimens were obtained by conventional casting. After casting, surface roughness of the specimens were evaluated with a surface profilometer. The surface roughness of the specimens cast in new titanium investment material was (1.72 ± 0.08) µm, which was much smaller than that from Rematitan Plus [(1.91 ± 0.15) µm, P cast using these two investment materials are both smooth enough to fulfill the demand of the titanium precision-casting for prosthodontic clinical use.

The mortality divide in India: the differential contributions of gender, caste, and standard of living across the life course.

Science.gov (United States)

Subramanian, S V; Nandy, Shailen; Irving, Michelle; Gordon, Dave; Lambert, Helen; Davey Smith, George

2006-05-01

We investigated the contributions of gender, caste, and standard of living to inequalities in mortality across the life course in India. We conducted a multilevel cross-sectional analysis of individual mortality, using the 1998-1999 Indian National Family Health Survey data for 529321 individuals from 26 states. Substantial mortality differentials were observed between the lowest and highest standard-of-living quintiles across all age groups, ranging from an odds ratio (OR) of 4.61 (95% confidence interval [CI]=2.98, 7.13) in the age group 2 to 5 years to an OR of 1.97 (95% CI=1.68, 2.32) in the age group 45 to 64 years. Excess mortality for girls was evident only for the age group 2 to 5 years (OR=1.33, 95% CI=1.13, 1.58). Substantial caste differentials were observed at the beginning and end stages of life. Area variation in mortality is partially a result of the compositional effects of household standard of living and caste. The mortality burden, across the life course in India, falls disproportionately on economically disadvantaged and lower-caste groups. Residual state-level variation in mortality suggests an underlying ecology to the mortality divide in India.

Examination and Elimination of Defects in Cone Casting Made of Ductile Cast Iron

Directory of Open Access Journals (Sweden)

Guzik E.

2013-12-01

Full Text Available In the scope of existing cooperation with the Foundry of Cast Iron ZM “WSK Rzeszów” Ltd. there was carried out research work of microstructure and mechanical properties in the walls of a cone casting made of ductile cast iron. The particular attention was being put to the search of the potential brittle phases which have deleterious effect on ductility and dynamic properties of highly strained use of the casting prone to the potential risk of cracks during the highly strained use.

Effects of the status of women on the first-birth interval in Indian urban society.

Science.gov (United States)

Nath, D C; Land, K C; Goswami, G

1999-01-01

The status of women, which is relative and multidimensional, has an important bearing on any long-term reduction in fertility. In Indian society, where cohabitation and childbearing are socially sanctioned only after marriage, the length of the first-birth interval affects the completed family size by influencing the spacing and childbearing pattern of a family. This study examines the influence of certain aspects of the status of married women--education, employment, role in family decision making, and age at marriage--along with three socioeconomic variables--per capita income of the family, social position of the household, and the caste system--on the duration of the first-birth interval in an urban Hindu society of the north-east Indian state of Assam. The data were analysed by applying life table and hazard regression techniques. The results indicate that a female's age at marriage, education, current age, role in decision making, and the per capita income of the household are the main covariates that strongly influence the length of the first-birth interval of Hindu females of urban Assam. Of all the covariates studied, a female's education appears to be a key mediating factor, through its influence on her probability of employment outside the home and thereby an earned income and on her role in family decision making. Unlike other Indian communities, the effect of the caste system does not have a significant effect on first-birth timing in this urban Hindu society.

Association of paraoxonase-1 gene polymorphisms with insulin resistance in South Indian population.

Science.gov (United States)

Gomathi, Panneerselvam; Iyer, Anandi Chandramouli; Murugan, Ponniah Senthil; Sasikumar, Sundaresan; Raj, Nancy Bright Arul Joseph; Ganesan, Divya; Nallaperumal, Sivagnanam; Murugan, Maruthamuthu; Selvam, Govindan Sadasivam

2018-04-15

Insulin resistance plays a crucial role in the pathogenesis of type 2 diabetes and cardiovascular diseases. Recently, paraoxonase-1(PON1) is reported to have an ability to reduce insulin resistance by promoting glucose transporter-4 (GLUT-4) expression in vitro. Single nucleotide polymorphism (SNP) in PON1 is associated with variability in enzyme activity and concentration. Based on this we aimed to investigate the association of PON1 (Q192R and L55M) polymorphisms with the risk of developing insulin resistance in adult South Indian population. Two hundred and eighty seven (287) Type 2 diabetes patients and 293 healthy controls were enrolled in this study. All the study subjects were genotyped for PON1 (Q192R and L55M) missense polymorphisms using polymerase chain reaction-restriction fragment length polymorphism (PCRRFLP) method. Fasting serum insulin level was measured by ELISA. The distribution of QR/RR and LM/MM genotypes were significantly higher in type 2 diabetes patients compared with healthy controls. Moreover, the R and M alleles were significantly associated with type 2 diabetes with an Odds Ratio of 1.68 (P  R genotypes were found to be significantly associated with higher BMI, cholesterol, triglycerides, LDL, fasting serum insulin and HOMA-IR. Further, the mutant allele or genotypes of PON1 L55M were associated with higher BMI, triglycerides, VLDL, fasting serum insulin and HOMA-IR among adult type 2 diabetes patients. PON1 (Q192R and L55M) polymorphisms may play a crucial role in pathogenesis and susceptibility of insulin resistance thus leads to the development of type 2 diabetes in South Indian population. Copyright © 2018 Elsevier B.V. All rights reserved.

A Comparative Rugoscopic Study of the Dentate and Edentulous Individuals in the South Indian Population

Directory of Open Access Journals (Sweden)

Jagdish Prasad Rajguru

2014-01-01

Full Text Available This study analyzes the rugae pattern in dentulous and edentulous patients and also evaluates the association of rugae pattern between males and females. Aims and Objectives. This study aims to investigate rugae patterns in dentulous and edentulous patients of both sexes in South Indian population and to find whether palatoscopy is a useful tool in human identification. Materials and Methods. Four hundred outpatients from Sree Balaji Dental College and Hospital, Chennai, were included in the study. The study group was equally divided between the sexes, which was further categorized into 100 dentulous and edentulous patients, respectively. Results. The edentulous male showed the highest mean of wavy pattern and total absence of circular pattern while the edentulous female group showed the highest mean of curved pattern and total absence of nonspecific pattern, while dentate population showed similar value as that of the overall population such as straight, wavy, and curved patterns. Conclusion. The present study concludes that there is similar rugae pattern of distribution between male and female dentate population while there is varied pattern between the sexes of edentulous population. However, the most predominant patterns were straight, wavy, and circular patterns.

Colour Metallography of Cast Iron

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2009-05-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron.Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron , uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditionalmaterials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Genetic epidemiology of pharmacogenetic variations in CYP2C9, CYP4F2 and VKORC1 genes associated with warfarin dosage in the Indian population.

Science.gov (United States)

Giri, Anil K; Khan, Nazir M; Grover, Sandeep; Kaur, Ismeet; Basu, Analabha; Tandon, Nikhil; Scaria, Vinod; Kukreti, Ritushree; Brahmachari, Samir K; Bharadwaj, Dwaipayan

2014-07-01

Warfarin, a widely used anticoagulant, exhibits large interindividual variability in dose requirements. CYP2C9 and VKORC1 polymorphisms in various ethnic groups have been extensively studied as genetic markers associated with variable drug response. However, allele frequencies of these variants have not been assessed in major ethnic groups in the Indian population. To study the functional variants known to affect warfarin dosing, we reanalyzed genotype microarray datasets generated as a part of genome-wide association studies as well as data from the Indian Genome Variation database. We examined data from 2680 individuals across 24 ethnically diverse Indian subpopulations. Allelic distribution of VKORC1 (-1639G>A) showed a greater degree of variation across Indian subpopulations, with frequencies as low as 6.5% in an out-group subpopulation to >70% in Tibeto-Burmans. Risk allele frequency of CYP4F2*3 (V433M) was higher in north Indians (0.30-0.44), as compared with other world populations, such as African-American (0.12), Caucasian (0.34) and Hispanic (0.23). TheVKORC1 variant (-1639A) was shown to be prevalent amongst Tibeto-Burmans, whereas CYP2C9 (R144C, I359L) and CYP4F2 (V433M) variants were observed in considerable variability amongst Indo-Europeans. The frequency of CYP2C9*3 (I359L) in north Indians was found to be higher than in most Asian populations. Furthermore, geographical distribution patterns of these variants in north India showed an increased trend of warfarin extensive metabolizers from the Himalayan to Gangetic region. Combined allele frequency (CYP2C9*3 and CYP4F2*3) data suggest that poor metabolizers varied in the range of 0.38-1.85% in Indo-Europeans. Based on genotypic distribution, the majority of the Indian subpopulation might require higher doses for stable anticoagulation, whereas careful assessment is required for Tibeto-Burmans who are expected to have intermediate dose requirement. This is the largest global genetic epidemiological

Temperature profile and water depth data collected from USS BARBEY using BT and XBT casts in the TOGA Area - Pacific Ocean and other areas from 03 November 1988 to 01 December 1988 (NODC Accession 8800327)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile and water depth data were collected using BT and XBT casts from the USS BARBEY in the TOGA Area - Pacific Ocean, Bay of Bengal, Indian Ocean,...

Casting characteristics of Al-Mg alloy 535 cast in permanent moulds

International Nuclear Information System (INIS)

Fasoyinu, F.A.; Thomson, J.; Cousineau, D.; Castles, T.; Sahoo, M.

2002-01-01

Aluminum alloy 535 could be used for automotive and marine applications because of its good corrosion resistance against mild alkaline and salt spray exposure. The majority of components from this alloy are usually produced by sand casting because it is prone to hot shortness and has poor fluidity when poured in permanent moulds. In an attempt to improve its castability in permanent moulds, casting characteristics such as casting fluidity and hot tear resistance have been studied. In addition, the effectiveness of titanium, boron, scandium, zirconium and a combination of selected elements from this group as grain refiners were evaluated. It s shown that alloy 535 exhibits good casting fluidity when poured with adequate metal superheat and that there is significant improvement in hot tear resistance following grain refinement. (author)

No land in sight : impact of caste on slum communities' access to land in Bangalore, India

OpenAIRE

Narayana, Rakesh

2012-01-01

This study examines the impact of caste on slum communities’ access to urban land in Bangalore, India. Historically, pattern of land ownership in India was inextricably melded together with caste wherein the dominant castes owned land and excluded Dalits from land access. Slums can be seen as primarily an urban land access issue. A majority of slum residents in Bangalore are Dalits though they form a minority in the overall population. The study adopts a Social Exclusion paradigm to understan...

Applying RP-FDM Technology to Produce Prototype Castings Using the Investment Casting Method

Directory of Open Access Journals (Sweden)

M. Macků

2012-09-01

Full Text Available The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to theproduction of the casting itself. The FDM method was applied for the production of the 3D pattern. Its main objective was to find out whatdimensional changes happened during individual production stages, starting from the 3D pattern printing through a silicon mouldproduction, wax patterns casting, making shells, melting out wax from shells and drying, up to the production of the final casting itself.Five measurements of determined dimensions were made during the production, which were processed and evaluated mathematically.A determination of shrinkage and a proposal of measures to maintain the dimensional stability of the final casting so as to meetrequirements specified by a customer were the results.

Casting of microstructured shark skin surfaces and possible applications on aluminum casting parts

Directory of Open Access Journals (Sweden)

Todor Ivanov

2011-02-01

Full Text Available Within the project Functional Surfaces via Micro- and Nanoscaled Structures?which is part of the Cluster of Excellence 揑ntegrative Production Technology?established and financed by the German Research Foundation (DFG, an investment casting process to produce 3-dimensional functional surfaces down to a structural size of 1 μm on near-net-shape-casting parts has been developed. The common way to realize functional microstructures on metallic surfaces is to use laser ablation, electro discharge machining or micro milling. The handicap of these processes is their limited productivity. The approach of this project to raise the efficiency is to use the investment casting process to replicate microstructured surfaces by moulding from a laser-microstructured grand master pattern. The main research objective deals with the investigation of the single process steps of the investment casting process with regard to the moulding accuracy. Actual results concerning making of the wax pattern, suitability of ceramic mould and core materials for casting of an AlSi7Mg0.3 alloy as well as the knock-out behavior of the shells are presented. By using of the example of an intake manifold of a gasoline race car engine, a technical shark skin surface has been realized to reduce the drag of the intake air. The intake manifold consists of an air-restrictor with a defined inner diameter which is microstructured with technical shark skin riblets. For this reason the inner diameter cannot be drilled after casting and demands a very high accuracy of the casting part. A technology for the fabrication and demoulding of accurate microstructured castings are shown. Shrinkage factors of different moulding steps of the macroscopic casting part as well as the microscopic riblet structure have been examined as well.

Premature mortality patterns among American Indians in South Dakota, 2000-2010.

Science.gov (United States)

Christensen, Mathew; Kightlinger, Lon

2013-05-01

American Indians in South Dakota have the highest mortality rates in the nation compared to other racial and ethnic groups and American Indians in other states. Cause-related and age-specific mortality patterns among American Indians in South Dakota are identified to guide prevention planning and policy efforts designed to reduce mortality within this population, in both South Dakota and other parts of the U.S. Death certificate data from South Dakota (2000-2010), on 5738 American Indians and 70,580 whites, were used to calculate age-specific mortality rates and rate ratios. These values were examined in order to identify patterns among the leading causes of death. Analyses were completed in 2011 and 2012. Within the South Dakota population, 70% of American Indians died before reaching age 70 years, compared to 25% of whites. Fatal injuries and chronic diseases were the leading causes of premature mortality. Nine leading causes of death showed consistent patterns of mortality disparity between American Indians and whites, with American Indians having significantly higher rates of mortality at lower ages. Premature mortality among American Indians in South Dakota is a serious public health problem. Unified efforts at the federal, tribal, state, and local levels are needed to reduce premature death within this population. Copyright © 2013 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Mutation analysis of β-thalassemia in East-Western Indian population: a recent molecular approach

Science.gov (United States)

Shah, Parth S; Shah, Nidhi D; Ray, Hari Shankar P; Khatri, Nikunj B; Vaghasia, Ketan K; Raval, Rutvik J; Shah, Sandip C; Rao, Mandava V

2017-01-01

Background β-Thalassemia is the most prevalent genetic disorder in India. Its traits and coinheritance vary from mild to severe conditions, resulting in thalassemia minor, intermediate, and major, depending upon many factors. Purpose The objective of this study was to identify the incidence of β-thalassemia traits, their coinheritance, and mutations, as well as to support the patients already diagnosed with β-thalassemia in East-Western Indian population for better management. Patients and methods Seventy-five referral cases for β-thalassemia were analyzed for various β-thalassemia traits, heterozygosity, and homozygosity conditions. Blood phenotypic parameters using cell counter and capillary electrophoresis were investigated. Analyses of eight common mutations of thalassemia in India were carried out using polymerase chain reaction-amplification refractory mutation system, end point polymerase chain reaction, and DNA sequencing methods. Results Of these (75) referral cases from East-Western Indian region, 68 were positive for β-thalassemia (90.67%). The majority of case types were of β-thalassemia minor (49, 65.33%), followed by HbE traits (6, 8.0%) and β-thalassemia major, including heterozygous and homozygous (5, 6.66%; 4, 5.33%) types and then HbE homozygous (2, 2.66%), as well as one each of the HbE/β-thalassemia and HbD/β-thalassemia (1, 1.34%) combination. Mutation analysis also revealed that the highest frequency of mutation was c.92+5G>C (41, 60.29%) followed by deletion 619bp (9, 13.23%) and c.79G>A (8, 11.76%) in our study group. Five cases (nos. 24, 27, 33, 58, and 71) exhibited coinheritance between β0/β+ (2), β0/β D (1), and c.124_127delTTCT/β+ or β0(2) affecting the Rajasthani and Gujarati populations in our study of the Western region of India. Conclusion We strongly recommend these Western populations for genetic screening before adopting reproductive technologies and interracial marital relations. PMID:28546763

Aluminium Foam and Magnesium Compound Casting Produced by High-Pressure Die Casting

Directory of Open Access Journals (Sweden)

Iban Vicario

2016-01-01

Full Text Available Nowadays, fuel consumption and carbon dioxide emissions are two of the main focal points in vehicle design, promoting the reduction in the weight of vehicles by using lighter materials. The aim of the work is to evaluate the influence of different aluminium foams and injection parameters in order to obtain compound castings with a compromise between the obtained properties and weight by high-pressure die cast (HPDC using aluminium foams as cores into a magnesium cast part. To evaluate the influence of the different aluminium foams and injection parameters on the final casting products quality, the type and density of the aluminium foam, metal temperature, plunger speed, and multiplication pressure have been varied within a range of suitable values. The obtained compound HPDC castings have been studied by performing visual and RX inspections, obtaining sound composite castings with aluminium foam cores. The presence of an external continuous layer on the foam surface and the correct placement of the foam to support injection conditions permit obtaining good quality parts. A HPDC processed magnesium-aluminium foam composite has been developed for a bicycle application obtaining a suitable combination of mechanical properties and, especially, a reduced weight in the demonstration part.

Clinical profile and neuroimaging in pediatric optic neuritis in Indian population: A case series

Directory of Open Access Journals (Sweden)

Rutika Khadse

2017-01-01

Full Text Available Purpose of the study: The purpose of this study was to report clinical features, neuroimaging, and visual outcome in pediatric optic neuritis (ON in Indian population. Materials and Methods: This is a retrospective study of children up to the age of 16 years, diagnosed with ON, that presented at pediatric and neuroophthalmology clinic of a tertiary eye care center, in South India, within the period of 2010–2015. Results: We identified 62 eyes of 40 children diagnosed as ON within the study period. The mean age was 11.15 ± 3.24 years (1–15 years with mean follow-up of 13 months. In this series, there was female preponderance (67%. Mean logarithm of the minimum angle of resolution visual acuity at presentation was 1.14 ± 0.93, which after treatment recovered to 0.10 ± 0.26 at final visit (P < 0.001. Involvement was bilateral in 22 children (55% and recurrent in 3 eyes of 3 children. Preceding febrile illness was reported in seven cases (18%. Four (10% cases were diagnosed as multiple sclerosis (MS, one with neuromyelitis optica , and one with acute disseminated encephalomyelitis. One case was associated with tuberculous meningitis, 1 with septicemia, and 1 with bilateral maxillary sinusitis. Neuroimaging studies of optic nerve in 14 children demonstrated isolated optic nerve enhancement. Magnetic resonance imaging brain revealed white matter T2 hyperintense lesions separate from optic nerve in ten cases, of which four cases were diagnosed as MS. Conclusions: Bilateral presentation was common, association with MS was low. Papillitis was more frequent than retrobulbar neuritis and prognosis was good in pediatric ON in Indian population.

Modification of the Fitzpatrick system of skin phototype classification for the Indian population, and its correlation with narrowband diffuse reflectance spectrophotometry.

Science.gov (United States)

Sharma, V K; Gupta, V; Jangid, B L; Pathak, M

2018-04-01

The Fitzpatrick classification for skin phototyping is widely used, but its usefulness in dark-skinned populations has been questioned by some researchers. Recently, skin colour measurement has been proposed for phototyping skin colour objectively. To modify the Fitzpatrick system of skin phototyping for the Indian population and to study its correlation with skin colour using narrowband diffuse reflectance spectrophotometry METHODS: Answer choices for three items (eye colour, hair colour, colour of unexposed skin) out of 10 in the original Fitzpatrick questionnaire were modified, followed by self-administration of the original and the modified Fitzpatrick questionnaire by 70 healthy Indian volunteers. Skin colour (melanin and erythema indices) was measured from two photoexposed and two photoprotected sites using a narrowband reflectance spectrophotometer. The mean ± SD scores for the original and modified Fitzpatrick questionnaires were 25.40 ± 4.49 and 23.89 ± 4.82, respectively (r = 0.97, P Spectrophotometry can be a useful objective tool for skin phototyping. © 2018 British Association of Dermatologists.

Applying RP-FDM Technology to Produce Prototype Castings Using the Investment Casting Method

Directory of Open Access Journals (Sweden)

Macků M.

2012-09-01

Full Text Available The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to the production of the casting itself. The FDM method was applied for the production of the 3D pattern. Its main objective was to find out what dimensional changes happened during individual production stages, starting from the 3D pattern printing through a silicon mould production, wax patterns casting, making shells, melting out wax from shells and drying, up to the production of the final casting itself. Five measurements of determined dimensions were made during the production, which were processed and evaluated mathematically. A determination of shrinkage and a proposal of measures to maintain the dimensional stability of the final casting so as to meet requirements specified by a customer were the results.

Casting AISI 316 steel by gel cast

International Nuclear Information System (INIS)

Ozols, A; Thern, G; Rozenberg, S; Barreiro, M; Marajofsky, A

2004-01-01

The feasibility of producing AISI 316 steel components from their powders and avoiding their compaction is analyzed. A casting technique is tested that is similar to gel casting, used for ceramic materials. In the initial stage, the process consists of the formulation of a concentrated barbotine of powdered metal in a solution of water soluble organic monomers, which is cast in a mold and polymerized in situ to form a raw piece in the shape of the cavity. The process can be performed under controlled conditions using barbotines with a high monomer content from the acrylimide family. Then, the molded piece is slowly heated until the polymer is eliminated, and it is sintered at temperatures of 1160 o C to 1300 o C under a dry hydrogen atmosphere, until the desired densities are attained. The density and micro structure of the materials obtained are compared with those for the materials compacted and synthesized by the conventional processes. The preliminary results show the feasibility of the process for the production of certain kinds of structural components (CW)

Population dynamics of the yellowstripe scad (Selaroides leptolepis Cuvier, 1833) and Indian mackerel (Rastrelliger kanagurta Cuvier, 1816) in the Wondama Bay Water, Indonesia

Science.gov (United States)

Sala, R.; Bawole, R.; Runtuboi, F.; Mudjirahayu; Wopi, I. A.; Budisetiawan, J.; Irwanto

2018-03-01

The Wondama Bay water is located within the Cendrawasih Bay National Park and is potential for fishery resources, including pelagic fish such as yellowstripe scad (Selaroides leptolepis Cuvier, 1833) and Indian mackerel (Rastrelliger kanagurta Cuvier, 1816). Yet, information about the population dynamics of these species in the region is unknown until today. Meanwhile, the fishing activities have been quite intensive and include the dominant catches over the last ten years by traditional fishermen fishing using liftnets. Therefore, this study aims to determine some of specific characteristics of the population dynamics and fish utilization status of scad and mackerel in the waters of the Wondama Bay. Data used in this study were taken from direct observation of catch of liftnet fishery. The data then were analysed by using FISAT II to estimate the growth parameters, mortality rates, and yield per recruitment. The results showed that yellowstripe scad has the positive allometric growth, while Indian mackerel followed isometric growth. Models of fish growth were L(t) = 22 (1-e-3.0(t-0.05)) for yellowstripe scad and L(t) = 27.8 (1-e-4.0(t-0.04)) for Indian mackerel. The natural mortality (M) of 4.19 year-1, fishing mortality (F) of 5.01 year-1, and total mortality (Z) of 9.20 year-1 were for yellowstripe scad, and M of 4.74 year-1, F of 2.52 year-1 and Z of 7.26 year-1 were for Indian mackerel. Based on the mortality rates, estimated exploitation rate for the yellowatripe scad was 54 % and the Indian mackerel was 35 %. To increase the production of catch without increasing fishing effort (fishing mortality) can be done by increasing the size of fish caught or the Lc/L∞ should be greater than 0.5.

Association of specific haplotype of TNFα with Helicobacter pylori ...

Indian Academy of Sciences (India)

pylori-mediated duodenal ulcer in eastern Indian population. MEENAKSHI ... IL6 and IL8 revealed no association with H. pylori-mediated duodenal ulcer at the .... cation, belonging to the same caste/ethnic (Bengali–Hindu) background.

Indian Institute of Science, Bangalore

Indian Academy of Sciences (India)

user

2015-07-04

Jul 4, 2015 ... About 18% of Indian population speak Dravidian language. Linguistic ... Military conquests by Arabs and Turks. British colonization. Among several ... 132 individuals. 25 populations. 15 states. All the language families. 560,123 SNPs. HGDP & HapMap. PCA - EIGENSOFT. Autosomal SNPs. Affymetrix 6.0 ...

Symptomatic stent cast.

LENUS (Irish Health Repository)

Keohane, John

2012-02-03

Biliary stent occlusion is a major complication of endoscopic stent insertion and results in repeat procedures. Various theories as to the etiology have been proposed, the most frequently studied is the attachment of gram negative bacteria within the stent. Several studies have shown prolongation of stent patency with antibiotic prophylaxis. We report the case of stent occlusion from a cast of a previously inserted straight biliary stent; a "stent cast" in an 86-year-old woman with obstructive jaundice. This was retrieved with the lithotrypter and she made an uneventful recovery. This is the first reported case of a biliary stent cast.

Fracture Mechanisms in Steel Castings

Directory of Open Access Journals (Sweden)

Stradomski Z.

2013-09-01

Full Text Available The investigations were inspired with the problem of cracking of steel castings during the production process. A single mechanism of decohesion - the intergranular one - occurs in the case of hot cracking, while a variety of structural factors is decisive for hot cracking initiation, depending on chemical composition of the cast steel. The low-carbon and low-alloyed steel castings crack due to the presence of the type II sulphides, the cause of cracking of the high-carbon tool cast steels is the net of secondary cementite and/or ledeburite precipitated along the boundaries of solidified grains. Also the brittle phosphor and carbide eutectics precipitated in the final stage solidification are responsible for cracking of castings made of Hadfield steel. The examination of mechanical properties at 1050°C revealed low or very low strength of high-carbon cast steels.

Modelling the Cast Component Weight in Hot Chamber Die Casting using Combined Taguchi and Buckingham's π Approach

Science.gov (United States)

Singh, Rupinder

2018-02-01

Hot chamber (HC) die casting process is one of the most widely used commercial processes for the casting of low temperature metals and alloys. This process gives near-net shape product with high dimensional accuracy. However in actual field environment the best settings of input parameters is often conflicting as the shape and size of the casting changes and one have to trade off among various output parameters like hardness, dimensional accuracy, casting defects, microstructure etc. So for online inspection of the cast components properties (without affecting the production line) the weight measurement has been established as one of the cost effective method (as the difference in weight of sound and unsound casting reflects the possible casting defects) in field environment. In the present work at first stage the effect of three input process parameters (namely: pressure at 2nd phase in HC die casting; metal pouring temperature and die opening time) has been studied for optimizing the cast component weight `W' as output parameter in form of macro model based upon Taguchi L9 OA. After this Buckingham's π approach has been applied on Taguchi based macro model for the development of micro model. This study highlights the Taguchi-Buckingham based combined approach as a case study (for conversion of macro model into micro model) by identification of optimum levels of input parameters (based on Taguchi approach) and development of mathematical model (based on Buckingham's π approach). Finally developed mathematical model can be used for predicting W in HC die casting process with more flexibility. The results of study highlights second degree polynomial equation for predicting cast component weight in HC die casting and suggest that pressure at 2nd stage is one of the most contributing factors for controlling the casting defect/weight of casting.

Sleep deprivation predisposes Gujarati Indian adolescents to obesity

Directory of Open Access Journals (Sweden)

Shaikh Wasim

2009-01-01

Full Text Available Background and Aim: Recent studies on various populations indicate that lack of sleep is one of the potential risk factors predisposing the youth to obesity. Since there is a significant rise in obesity among Indian youth and because research indicating the role of sleep in development of obesity among Indian population is scant, the current study was undertaken to assess the effect of sleep duration on adiposity among Gujarati Indian adolescents. Materials and Methods: A randomized cross-sectional study was done on 489 voluntarily participating Indian adolescents in the age group of 16-19 years. Participants were grouped into two categories 1. Adequate Sleep Duration at Night (more than seven hours, ASDN and 2 Inadequate Sleep Duration at Night (less than seven hours, IASDN as reported by the participants. The participants were later assessed for adiposity in terms of BMI, BF % , FM, FMI and waist circumference, meal frequency per day and physical activity status. Results: In both boys as well as girls, the BMI, BF%, FM and FMI were significantly lower in the ASDN group than the IASDN group. However, there was an insignificant difference in the meal frequency and physical activity status between the ASDN and IASDN group. Conclusion : Inadequate sleep duration increases adiposity among Gujarati Indian adolescents but further studies are required to find out the mechanisms through which sleep affects adiposity in this population.

Estimating the effect of native Indian population on county alcohol consumption: the example of Ontario.

Science.gov (United States)

Adrian, M; Layne, N; Williams, R T

Multiple regression analysis of cross-sectional 1985-1986 Ontario county data indicated that the presence of Native Indians on reserves is a significant factor in explaining differences in county alcohol consumption levels. Consumption in counties with reserves was higher than in those without reserves by roughly 1.48 liters of absolute alcohol per adult; consumption increased as the Native reserve population increased (p less than 0.05). When income, employment, household crowding, type of industrial activity, northern isolation, and tourism were included, we could account for over 60% of the variation in alcohol consumption between Ontario counties (p less than 0.01). Every extra $1,000 in income per tax return was associated with a 0.297-liter reduction in absolute alcohol consumption. Efforts to reduce alcohol consumption in the Native population would have their greatest impact when associated with improved economic conditions.

Mechanism and application of a newly developed pressure casting process: horizontal squeeze casting

Directory of Open Access Journals (Sweden)

Li Peijie

2014-07-01

Full Text Available Compared to traditional high-pressure die casting (HPDC, horizontal squeeze casting (HSC is a more promising way to fabricate high-integrity castings, owing to a reduced number of gas and shrinkage porosities produced in the casting. In this paper, the differences between HSC and HPDC are assessed, through which it is shown that the cavity filling velocity and the size of the gating system to be the most notable differences. Equipment development and related applications are also reviewed. Furthermore, numerical simulation is used to analyze the three fundamental characteristics of HSC: slow cavity filling, squeeze feeding and slow sleeve filling. From this, a selection principle is given based on the three related critical casting parameters: cavity filling velocity, gate size and sleeve filling velocity. Finally, two specific applications of HSC are introduced, and the future direction of HSC development is discussed.

Significant association of the dupA gene of Helicobacter pylori with duodenal ulcer development in a South-east Indian population

OpenAIRE

Alam, Jawed; Maiti, Sankar; Ghosh, Prachetash; De, Ronita; Chowdhury, Abhijit; Das, Suryasnata; Macaden, Ragini; Devarbhavi, Harshad; Ramamurthy, T.; Mukhopadhyay, Asish K.

2012-01-01

A novel virulence factor, duodenal ulcer-promoting gene A (dupA), in Helicobacter pylori has been found to be associated with disease in certain populations but not in others. This study analysed a South-east Indian population as part of the debate about the relevance of dupA for the prediction of clinical outcomes. A total of 140 H. pylori strains isolated from duodenal ulcer (DU) (n=83) and non-ulcer dyspepsia (NUD) patients (n=57) were screened by PCR and dot-blot hybridization to determin...

The average Indian female nose.

Science.gov (United States)

Patil, Surendra B; Kale, Satish M; Jaiswal, Sumeet; Khare, Nishant; Math, Mahantesh

2011-12-01

This study aimed to delineate the anthropometric measurements of the noses of young women of an Indian population and to compare them with the published ideals and average measurements for white women. This anthropometric survey included a volunteer sample of 100 young Indian women ages 18 to 35 years with Indian parents and no history of previous surgery or trauma to the nose. Standardized frontal, lateral, oblique, and basal photographs of the subjects' noses were taken, and 12 standard anthropometric measurements of the nose were determined. The results were compared with published standards for North American white women. In addition, nine nasal indices were calculated and compared with the standards for North American white women. The nose of Indian women differs significantly from the white nose. All the nasal measurements for the Indian women were found to be significantly different from those for North American white women. Seven of the nine nasal indices also differed significantly. Anthropometric analysis suggests differences between the Indian female nose and the North American white nose. Thus, a single aesthetic ideal is inadequate. Noses of Indian women are smaller and wider, with a less projected and rounded tip than the noses of white women. This study established the nasal anthropometric norms for nasal parameters, which will serve as a guide for cosmetic and reconstructive surgery in Indian women.

NUMERICAL MODELING OF HARDENING OF UNINTERRUPTEDLY-CASTED BRONZE CASTING

Directory of Open Access Journals (Sweden)

E. I. Marukovich

2009-01-01

Full Text Available The three-dimensional numerical model for calculation of thermal fields during solidification of continuously casted bronze casting is developed. Coefficients of heat transfer on borders of calculation areas on the basis of the solution of inverse heat transfer conduction problem are determined. The analysis of thermal fields, depending on loop variables of drawing and the sizes of not cooled zone of crystallizer is curried out.

A review of the key genetic tools to assist imperiled species conservation: analyzing West Indian manatee populations

Science.gov (United States)

Bonde, Robert K.; McGuire, Peter M.; Hunter, Margaret E.

2012-01-01

Managers faced with decisions on threatened and endangered wildlife populations often are lacking detailed information about the species of concern. Integration of genetic applications will provide management teams with a better ability to assess and monitor recovery efforts on imperiled species. The field of molecular biology continues to progress rapidly and many tools are currently available. Presently, little guidance is available to assist researchers and managers with the appropriate selection of genetic tools to study the status of wild manatee populations. We discuss several genetic tools currently employed in the application of conservation genetics, and address the utility of using these tools to determine population status to aid in conservation efforts. As an example, special emphasis is focused on the endangered West Indian manatee (Order Sirenia). All four extant species of sirenians are imperiled throughout their range, predominately due to anthropogenic sources; therefore, the need for genetic information on their population status is direly needed.

Casting thermal simulation

International Nuclear Information System (INIS)

Shamsuddin bin Sulaiman

1994-01-01

The whole of this study is concerned with process simulation in casting processes. This study describes the application of the finite element method as an aid to simulating the thermal design of a high pressure die casting die by analysing the cooling transients in the casting cycle. Two types of investigation were carried out to model the linear and non-linear cooling behavior with consideration of a thermal interface effect. The simulated cooling for different stages were presented in temperature contour form. These illustrate the successful application of the Finite Element Method to model the process and they illustrate the significance of the thermal interface at low pressure

Clean Metal Casting; FINAL

International Nuclear Information System (INIS)

Makhlouf M. Makhlouf; Diran Apelian

2002-01-01

The objective of this project is to develop a technology for clean metal processing that is capable of consistently providing a metal cleanliness level that is fit for a given application. The program has five tasks: Development of melt cleanliness assessment technology, development of melt contamination avoidance technology, development of high temperature phase separation technology, establishment of a correlation between the level of melt cleanliness and as cast mechanical properties, and transfer of technology to the industrial sector. Within the context of the first task, WPI has developed a standardized Reduced Pressure Test that has been endorsed by AFS as a recommended practice. In addition, within the context of task1, WPI has developed a melt cleanliness sensor based on the principles of electromagnetic separation. An industrial partner is commercializing the sensor. Within the context of the second task, WPI has developed environmentally friendly fluxes that do not contain fluorine. Within the context of the third task, WPI modeled the process of rotary degassing and verified the model predictions with experimental data. This model may be used to optimize the performance of industrial rotary degassers. Within the context of the fourth task, WPI has correlated the level of melt cleanliness at various foundries, including a sand casting foundry, a permanent mold casting foundry, and a die casting foundry, to the casting process and the resultant mechanical properties. This is useful in tailoring the melt cleansing operations at foundries to the particular casting process and the desired properties of cast components

Original Research Article Body Mass Index and Blood Pressure

African Journals Online (AJOL)

Erah

forum for the communication and evaluation of data, methods and findings in health sciences and related disciplines. ... study population and was commoner in males (5.9%) than in females (0.89%). ..... in the Indian Social Class and Heart Survey. J Hum ... homogenous caste population of Andra Pradesh. Am J Human Biol.

A Canadian Indian Health Status Index.

Science.gov (United States)

Connop, P J

1983-01-01

Health care services for registered "band" Indians in Ontario are provided primarily by the Canadian Federal Government. Complex management methods preclude the direct involvement of Indian people in the decisions for their health resource allocation. Health indicators, need, and health status indexes are reviewed. The biostatistics of mortality and demography of the Indian and reference populations are aggregated with hospitalization/morbidity experience as the Chen G'1 Index, as an indicator of normative and comparative need. This is weighted by linear measurements of perceived need for preventive medicine programs, as ranked and scaled values of priorities, Zj. These were determined by community survey on 11 Indian reserves using a non-probabilistic psychometric method of "pair comparisons," based upon "Thurstone's Law of Comparative Judgement.," The calculation of the aggregate single unit Indian Health Status Index [Log.G'1].Zj and its potential application in a "zero-base" budget is described.

14 CFR 23.621 - Casting factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Casting factors. 23.621 Section 23.621... Casting factors. (a) General. The factors, tests, and inspections specified in paragraphs (b) through (d... structural castings except castings that are pressure tested as parts of hydraulic or other fluid systems and...

Hair casts

OpenAIRE

Sweta S Parmar; Kirti S Parmar; Bela J Shah

2014-01-01

Hair casts or pseudonits are circumferential concretions, which cover the hair shaft in such a way that, it could be easily removed. They are thin, cylindrical, and elongated in length. We present an unusual case of an 8-year-old girl presenting with hair casts. Occurrence of these is unusual, and they may have varied associations. This patient was suffering from developmental delay. It is commonly misdiagnosed as and very important to differentiate from pediculosis capitis.

Age dependent physical and anatomical Indian data for application in internal dosimetry

International Nuclear Information System (INIS)

Dang, H.S.; Jaiswal, D.D.; Parameswaran, M.; Krishnamony, S.

1996-01-01

The data on physical, anatomical, physiological and metabolic human characteristics of the Indian population in various age groups were obtained for application in internal dosimetry. Only the physical and anatomical characteristics of the Indian population in age groups 0, 1, 5, 10, 15 y and adult are considered here. A comparison of the adult Indian data with that of ICRP Reference Man, clearly showed that with the exception of a few smaller organs, the body size as well as the organ weights of Indian subjects are, in general, smaller. With the exception of brain, a statistically significant linear correlation (p < 0.01) was observed between the body weights and the corresponding organ weights of Indian subjects in different age groups. (author)

HFIR Fuel Casting Support

Energy Technology Data Exchange (ETDEWEB)

Imhoff, Seth D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gibbs, Paul Jacob [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Solis, Eunice Martinez [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-28

Process exploration for fuel production for the High Flux Isotope Reactor (HFIR) using cast LEU-10wt.%Mo as an initial processing step has just begun. This project represents the first trials concerned with casting design and quality. The studies carried out over the course of this year and information contained in this report address the initial mold development to be used as a starting point for future operations. In broad terms, the final billet design is that of a solid rolling blank with an irregular octagonal cross section. The work covered here is a comprehensive view of the initial attempts to produce a sound casting. This report covers the efforts to simulate, predict, cast, inspect, and revise the initial mold design.

Sixty Years of Casting Research

Science.gov (United States)

Campbell, John

2015-11-01

The 60 years of solidification research since the publication of Chalmer's constitutional undercooling in 1953 has been a dramatic advance of understanding which has and continues to be an inspiration. In contrast, 60 years of casting research has seen mixed fortunes. One of its success stories relates to improvements in inoculation of gray irons, and another to the discovery of spheroidal graphite iron, although both of these can be classified as metallurgical rather than casting advances. It is suggested that true casting advances have dated from the author's lab in 1992 when a critical surface turbulence condition was defined for the first time. These last 20 years have seen the surface entrainment issues of castings developed to a sufficient sophistication to revolutionize the performance of light alloy and steel foundries. However, there is still a long way to go, with large sections of the steel and Ni-base casting industries still in denial that casting defects are important or even exist. The result has been that special ingots are still cast poorly, and shaped casting operations have suffered massive losses. For secondary melted and cast materials, electro-slag remelting has the potential to be much superior to expensive vacuum arc remelting, which has cost our aerospace and defense industries dearly over the years. This failure to address and upgrade our processing of liquid metals is a serious concern, since the principle entrainment defect, the bifilm, is seen as the principle initiator of cracks in metals; in general, bifilms are the Griffith cracks that initiate failures by cracking. A new generation of crack resistant metals and engineering structures can now be envisaged.

Engineering design of centrifugal casting machine

Science.gov (United States)

Kusnowo, Roni; Gunara, Sophiadi

2017-06-01

Centrifugal casting is a metal casting process in which metal liquid is poured into a rotating mold at a specific temperature. Given round will generate a centrifugal force that will affect the outcome of the casting. Casting method is suitable in the manufacture of the casting cylinder to obtain better results. This research was performed to design a prototype machine by using the concept of centrifugal casting. The design method was a step-by-step systematic approach in the process of thinking to achieve the desired goal of realizing the idea and build bridges between idea and the product. Design process was commenced by the conceptual design phase and followed by the embodiment design stage and detailed design stage. With an engineering design process based on the method developed by G. E. Dieter, draft prototype of centrifugal casting machine with dimension of 550×450×400 mm, ¼ HP motor power, pulley and belt mechanism, diameter of 120-150mm, simultaneously with the characteristics of simple casting product, easy manufacture and maintenance, and relatively inexpensive, was generated.

Clean Cast Steel Technology, Phase IV

Energy Technology Data Exchange (ETDEWEB)

Charles E. Bates

2003-02-24

The objective of the Clean Cast Steel Technology Program was to improve casting product quality by removing or minimizing oxide defects and to allow the production of higher integrity castings for high speed machining lines. Previous research has concentrated on macro-inclusions that break, chip, or crack machine tool cutters and drills and cause immediate shutdown of the machining lines. The overall goal of the project is to reduce the amount of surface macro-inclusions and improve the machinability of steel castings. Macro-inclusions and improve the machinability of steel castings. Macro-inclusions have been identified by industrial sponsors as a major barrier to improving the quality and marketability of steel castings.

Temperature and salinity profile data collected from XBT, CTD, MBT and Bottle casts from multiple platforms by the National Institute of Oceanography (NIO), India, in the Bay of Bengal from August 28, 1976 to January 07, 2009 (NODC Accession 0055418)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Physical data were collected from Bottle, MBT, XBT, and CTD casts from the Andaman and Burma Seas, Bay of Bengal, Malacca Straits, and the Indian Ocean. Data were...

Impact of as-cast structure on structure and properties of twin-roll cast AA8006 alloy

Energy Technology Data Exchange (ETDEWEB)

Slamova, M.; Ocenasek, V. [Vyzkumny Ustav Kovu, Panenske Brezany (Czechoslovakia); Juricek, Z.

2000-07-01

Sheet production by twin-roll casting (TRC) process is a well established practice in the aluminium industry because it offers several advantages in comparison with DC casting and hot rolling, esp. lower production and investment costs. Thin strips exhibiting a combination of good strength and high ductility are required for various applications and for this reason alloys with higher Fe and Mn content such as AA 8006 displace AA 1xxx or AA 8011 alloys. However, TRC of AA 8006 strips involves several problems, e.g. casting conditions and subsequent treatment procedures need fine tuning. The results of an investigation of the effect of casting conditions on structure and properties of AA 8006 strips are presented. The influence of casting speed, grain refiner addition, molten metal level in the tundish, tip setback and roll separating force was investigated. The impact of imperfect as-cast structure on structure and properties of thin strips in H22 and O tempers was evaluated and compared with strips from good as-cast material. (orig.)

Lower respiratory tract infection hospitalizations among American Indian/Alaska Native children and the general United States child population

Directory of Open Access Journals (Sweden)

Eric M. Foote

2015-11-01

Full Text Available Background: The lower respiratory tract infection (LRTI-associated hospitalization rate in American Indian and Alaska Native (AI/AN children aged <5 years declined during 1998–2008, yet remained 1.6 times higher than the general US child population in 2006–2008. Purpose: Describe the change in LRTI-associated hospitalization rates for AI/AN children and for the general US child population aged <5 years. Methods: A retrospective analysis of hospitalizations with discharge ICD-9-CM codes for LRTI for AI/AN children and for the general US child population <5 years during 2009–2011 was conducted using Indian Health Service direct and contract care inpatient data and the Nationwide Inpatient Sample, respectively. We calculated hospitalization rates and made comparisons to previously published 1998–1999 rates prior to pneumococcal conjugate vaccine introduction. Results: The average annual LRTI-associated hospitalization rate declined from 1998–1999 to 2009–2011 in AI/AN (35%, p<0.01 and the general US child population (19%, SE: 4.5%, p<0.01. The 2009–2011 AI/AN child average annual LRTI-associated hospitalization rate was 20.7 per 1,000, 1.5 times higher than the US child rate (13.7 95% CI: 12.6–14.8. The Alaska (38.9 and Southwest regions (27.3 had the highest rates. The disparity was greatest for infant (<1 year pneumonia-associated and 2009–2010 H1N1 influenza-associated hospitalizations. Conclusions: Although the LRTI-associated hospitalization rate declined, the 2009–2011 AI/AN child rate remained higher than the US child rate, especially in the Alaska and Southwest regions. The residual disparity is likely multi-factorial and partly related to household crowding, indoor smoke exposure, lack of piped water and poverty. Implementation of interventions proven to reduce LRTI is needed among AI/AN children.

Relationship between casting modulus and grain size in cast A356 aluminium alloys

International Nuclear Information System (INIS)

Niklas, A; Abaunza, U; Fernández-Calvo, A I; Lacaze, J

2012-01-01

Microstructure of Al-Si alloy castings depends most generally on melt preparation and on the cooling rate imposed by the thermal modulus of the component. In the case of Al-Si alloys, emphasis is put during melt preparation on refinement of pro-eutectic (Al) grains and on modification of the Al-Si eutectic. Thermal analysis has been used since long to check melt preparation before casting, i.e. by analysis of the cooling curve during solidification of a sample cast in an instrumented cup. The conclusions drawn from such analysis are however valid for the particular cooling conditions of the cups. It thus appeared of interest to investigate how these conclusions could extrapolate to predict microstructure in complicated cast parts showing local changes in the solidification conditions. For that purpose, thermal analysis cups and instrumented sand and die castings with different thermal moduli and thus cooling rates have been made, and the whole set of cooling curves thus recorded has been analysed. A statistical analysis of the characteristic features of the cooling curves related to grain refinement in sand and die castings allowed determining the most significant parameters and expressing the cube of grain size as a polynomial of these parameters. After introduction of a further parameter quantifying melt refining an excellent correlation, with a R 2 factor of 0.99 was obtained.

Mapping of PARK2 and PACRG overlapping regulatory region reveals LD structure and functional variants in association with leprosy in unrelated indian population groups.

Science.gov (United States)

Chopra, Rupali; Ali, Shafat; Srivastava, Amit K; Aggarwal, Shweta; Kumar, Bhupender; Manvati, Siddharth; Kalaiarasan, Ponnusamy; Jena, Mamta; Garg, Vijay K; Bhattacharya, Sambit N; Bamezai, Rameshwar N K

2013-01-01

Leprosy is a chronic infectious disease caused by Mycobacterium Leprae, where the host genetic background plays an important role toward the disease pathogenesis. Various studies have identified a number of human genes in association with leprosy or its clinical forms. However, non-replication of results has hinted at the heterogeneity among associations between different population groups, which could be due to differently evolved LD structures and differential frequencies of SNPs within the studied regions of the genome. A need for systematic and saturated mapping of the associated regions with the disease is warranted to unravel the observed heterogeneity in different populations. Mapping of the PARK2 and PACRG gene regulatory region with 96 SNPs, with a resolution of 1 SNP per 1 Kb for PARK2 gene regulatory region in a North Indian population, showed an involvement of 11 SNPs in determining the susceptibility towards leprosy. The association was replicated in a geographically distinct and unrelated population from Orissa in eastern India. In vitro reporter assays revealed that the two significantly associated SNPs, located 63.8 kb upstream of PARK2 gene and represented in a single BIN of 8 SNPs, influenced the gene expression. A comparison of BINs between Indian and Vietnamese populations revealed differences in the BIN structures, explaining the heterogeneity and also the reason for non-replication of the associated genomic region in different populations.

A genetic chronology for the Indian Subcontinent points to heavily sex-biased dispersals.

Science.gov (United States)

Silva, Marina; Oliveira, Marisa; Vieira, Daniel; Brandão, Andreia; Rito, Teresa; Pereira, Joana B; Fraser, Ross M; Hudson, Bob; Gandini, Francesca; Edwards, Ceiridwen; Pala, Maria; Koch, John; Wilson, James F; Pereira, Luísa; Richards, Martin B; Soares, Pedro

2017-03-23

India is a patchwork of tribal and non-tribal populations that speak many different languages from various language families. Indo-European, spoken across northern and central India, and also in Pakistan and Bangladesh, has been frequently connected to the so-called "Indo-Aryan invasions" from Central Asia ~3.5 ka and the establishment of the caste system, but the extent of immigration at this time remains extremely controversial. South India, on the other hand, is dominated by Dravidian languages. India displays a high level of endogamy due to its strict social boundaries, and high genetic drift as a result of long-term isolation which, together with a very complex history, makes the genetic study of Indian populations challenging. We have combined a detailed, high-resolution mitogenome analysis with summaries of autosomal data and Y-chromosome lineages to establish a settlement chronology for the Indian Subcontinent. Maternal lineages document the earliest settlement ~55-65 ka (thousand years ago), and major population shifts in the later Pleistocene that explain previous dating discrepancies and neutrality violation. Whilst current genome-wide analyses conflate all dispersals from Southwest and Central Asia, we were able to tease out from the mitogenome data distinct dispersal episodes dating from between the Last Glacial Maximum to the Bronze Age. Moreover, we found an extremely marked sex bias by comparing the different genetic systems. Maternal lineages primarily reflect earlier, pre-Holocene processes, and paternal lineages predominantly episodes within the last 10 ka. In particular, genetic influx from Central Asia in the Bronze Age was strongly male-driven, consistent with the patriarchal, patrilocal and patrilineal social structure attributed to the inferred pastoralist early Indo-European society. This was part of a much wider process of Indo-European expansion, with an ultimate source in the Pontic-Caspian region, which carried closely related Y

Comparison of residual stresses in sand- and chill casting of ductile cast iron wind turbine main shafts

International Nuclear Information System (INIS)

Sonne, M R; Hattel, J H; Frandsen, J O

2015-01-01

In this work, simulations of pouring, solidification and cooling, and residual stress evolution of sand and chill cast wind turbine main shafts is performed. The models are made in the commercial software MAGMAsoft. As expected, the cooling rate of the sand casting is shown to be much lower than for the chill casting, resulting in a very course microstructure. From the simulations the nodule count is found to be 17 nodules per mm 2 and 159 nodules per mm 2 for the sand and chill casting, respectively, in the critical region of the main bearing seat. This is verified from nodule counts performed on the real cast main shafts. Residual stress evaluations show an overall increase of the maximum principal stress field for the chill casting, which is expected. However, the stresses are found to be in compression on the surface of the chill cast main shaft, which is unforeseen. (paper)

Comparison of residual stresses in sand- and chill casting of ductile cast iron wind turbine main shafts

DEFF Research Database (Denmark)

Sonne, Mads Rostgaard; Frandsen, J. O.; Hattel, Jesper Henri

2015-01-01

In this work, simulations of pouring, solidification and cooling, and residual stress evolution of sand and chill cast wind turbine main shafts is performed. The models are made in the commercial software MAGMAsoft. As expected, the cooling rate of the sand casting is shown to be much lower than...... for the chill casting, resulting in a very course microstructure.From the simulations the nodule count is found to be 17 nodules per mm2 and 159 nodules permm2 for the sand and chill casting, respectively, in the critical region of the main bearing seat.This is verified from nodule counts performed on the real...... cast main shafts. Residual stressevaluations show an overall increase of the maximum principal stress field for the chill casting,which is expected. However, the stresses are found to be in compression on the surface of thechill cast main shaft, which is unforeseen....

Optimizing the Gating System for Steel Castings

Directory of Open Access Journals (Sweden)

Jan Jezierski

2018-04-01

Full Text Available The article presents the attempt to optimize a gating system to produce cast steel castings. It is based on John Campbell’s theory and presents the original results of computer modelling of typical and optimized gating systems for cast steel castings. The current state-of-the-art in cast steel casting foundry was compared with several proposals of optimization. The aim was to find a compromise between the best, theoretically proven gating system version, and a version that would be affordable in industrial conditions. The results show that it is possible to achieve a uniform and slow pouring process even for heavy castings to preserve their internal quality.

Wear resistance of cast iron

Directory of Open Access Journals (Sweden)

S. Pietrowski

2008-10-01

Full Text Available In this paper investigations of abrasive and adhesive wear resistance of different cast iron grades have been presented. Examinations showed, that the most advantageous pair of materials is the cast iron – the hardened steel with low-tempered martensite. It was found, that martensitic nodular cast iron with carbides is the most resistant material.

National Metal Casting Research Institute final report. Volume 2, Die casting research

Energy Technology Data Exchange (ETDEWEB)

Jensen, D. [University of Northern Iowa, Cedar Falls, IA (United States). Dept. of Industrial Technology] [comp.

1994-06-01

Four subprojects were completed: development and evaluation of die coatings, accelerated die life characterization of die materials, evaluation of fluid flow and solidification modeling programs, selection and characterization of Al-based die casting alloys, and influence of die materials and coatings on die casting quality.

Are Indian patients with juvenile-onset ankylosing spondylitis taller than reference population ?

Directory of Open Access Journals (Sweden)

Pulukool Sandhya

2015-01-01

Full Text Available Background & objectives: Paucity of growth retardation has been observed by us in patients with juvenile-onset ankylosing spondylitis (JAS in a tertiary care health centre in south India. We, therefore, undertook this pilot study to assess and compare anthropometry of patients with JAS who were 15 yr and older with that of adult onset ankylosing spondylitis (AAS and matching Indian reference population. Methods: Consecutive male patients (December 2009- October 2012 with JAS and AAS fulfilling Modified New York Criteria were selected after applying inclusion and exclusion criteria. Demography and anthropometry were noted. Height of both patient groups as well as their parents and siblings were compared with that of the reference population. Mid-parental height and delta height were derived. Those with delta height of >8.5 cm were compared with the remaining. Multivariate logistic regression was done for variables that were found to be significant by chi-square in bivariate analysis. Similar analysis was done for BMI also. Results: There was no significant difference in anthropometric variables between JAS and AAS groups. Twenty eight of the 30 (93.33% JAS patients were taller as compared to the reference population. Twenty six (86.67% AAS patients were taller than the reference population. The mean heights of JAS (170.67 ± 6.94 cm and AAS (168.2 ± 5.94 cm patients were significantly higher than the reference value of 163.11 cm; both p0 <0.001. Logistic regression revealed that tallness in JAS was associated positively with hypermobility (OR=23.46,95%CI 1.2-447.2, p0 =0.036. No significant association was detected for height in AAS and for BMI in both JAS and AAS groups. Interpretation & conclusions: No growth retardation was seen in patients with JAS in our study. Majority of patients with JAS and AAS were taller than reference population. The difference between mean height of JAS and AAS was not significant. Larger studies involving different

Building bridges in American Indian bereavement research.

Science.gov (United States)

Walker, Andrea C

2009-01-01

Due to the severity of the risks involved in violation of ethical principles with research of American Indian populations, more attention in literature is needed on the topic. This article reviews discussions of ethical and methodological issues, uses Muscogee Creeks' responses from the author's prior study (Walker, 2008; Walker & Balk, 2007) as an example and application, and specifically focuses on the research of death and bereavement. The article provides ethical reflection and recommendations for designing death and bereavement research as an outsider to the culture, as well as for building trust with participants in American Indian populations.

Sex determination from hand and foot dimensions in a North Indian population.

Science.gov (United States)

Krishan, Kewal; Kanchan, Tanuj; Sharma, Abhilasha

2011-03-01

Hands and feet are often recovered from the site of natural as well as man-made disasters because of bomb blasts, train accidents, plane crashes, or mass homicides. This study is intended to establish standards for determination of sex from the dimensions of hands and feet in a North Indian population. The data for this study comprise 123 men and 123 women aged between 17 and 20 years from the "Rajput" population of Himachal Pradesh in North India. Four anthropometric measurements viz. hand length, hand breadth, foot length, and foot breadth have been taken on both sides of each subject following international anthropometric standards. The hand index (hand breadth/hand length × 100) and the foot index (foot breadth/foot length × 100) were calculated. Sectioning points and regression models are derived for the hand and foot dimensions and the derived indices. The hand and foot dimensions show a higher accuracy in sex determination by sectioning point analysis when compared to hand and foot index. Of the hand and the foot dimensions, hand breadth and foot breadth showed better accuracy in sex determination. Hand index and foot index remain poor sex discriminators in the study. © 2011 American Academy of Forensic Sciences.

The Yanomami indians in the INTERSALT study

Directory of Open Access Journals (Sweden)

Mancilha-Carvalho Jairo de Jesus

2003-01-01

Full Text Available OBJECTIVE: To study the distribution and inter-relationship among constitutional and biochemical variables with blood pressure (BP in an population of Yanomami indians. To compare these findings with those of other populations. METHODS: The Yanomami indians were part of the INTERSALT, a study comprising 10,079 males and females, aged from 20 to 59 years, belonging to 52 populations in 32 countries in Africa, the Americas, Asia, and Europe. Each of the 52 centers was required to accrue 200 individuals, 25 participants in each age group. The variables analyzed were as follows: age, sex, arterial BP, urinary sodium and potassium excretion (24-hour urine, body mass index, and alcohol ingestion. RESULTS: The findings in the Yanomami population were as follows: a very low urinary sodium excretion (0.9 mmol/24h; mean systolic and diastolic BP levels of 95.4 mmHg and 61.4 mmHg, respectively; no cases of hypertension or obesity; and they have no knowledge of alcoholic beverages. Their BP levels do not elevate with age. The urinary sodium excretion relates positively and the urinary potassium excretion relates negatively to systolic BP. This correlation was maintained even when controlled for age and body mass index. CONCLUSION: A positive relation between salt intake and blood pressure was detected in the analysis of a set of diverse populations participating in the INTERSALT Study, including populations such as the Yanomami Indians. The qualitative observation of their lifestyle provided additional information.

The Yanomami Indians in the INTERSALT Study.

Science.gov (United States)

Mancilha-Carvalho, Jairo de Jesus; Souza e Silva, Nelson Albuquerque

2003-03-01

To study the distribution and interrelationship among constitutional and biochemical variables with blood pressure (BP) in an population of Yanomami indians. To compare these findings with those of other populations. The Yanomami indians were part of the INTERSALT, a study comprising 10,079 males and females, aged from 20 to 59 years, belonging to 52 populations in 32 countries in Africa, the Americas, Asia, and Europe. Each of the 52 centers was required to accrue 200 individuals, 25 participants in each age group. The variables analyzed were as follows: age, sex, arterial BP, urinary sodium and potassium excretion (24-hour urine), body mass index, and alcohol ingestion. The findings in the Yanomami population were as follows: a very low urinary sodium excretion (0.9 mmol/24 h); mean systolic and diastolic BP levels of 95.4 mmHg and 61.4 mmHg, respectively; no cases of hypertension or obesity; and they have no knowledge of alcoholic beverages. Their BP levels do not elevate with age. The urinary sodium excretion relates positively and the urinary potassium excretion relates negatively to systolic BP. This correlation was maintained even when controlled for age and body mass index. A positive relation between salt intake and blood pressure was detected in the analysis of a set of diverse populations participating in the INTERSALT Study, including populations such as the Yanomami Indians. The qualitative observation of their lifestyle provided additional information.

Prevalence of Rh, Duffy, Kell, Kidd & MNSs blood group antigens in the Indian blood donor population.

Science.gov (United States)

Makroo, R N; Bhatia, Aakanksha; Gupta, Richa; Phillip, Jessy

2013-03-01

Little data are available regarding the frequencies of the blood group antigens other than ABO and RhD in the Indian population. Knowledge of the antigen frequencies is important to assess risk of antibody formation and to guide the probability of finding antigen-negative donor blood, which is especially useful when blood is required for a patient who has multiple red cell alloantibodies. This study was carried out to determine the frequencies of the D, C, c, E, e, K, k, Fy(a), Fy(b), Jk(a), Jk(b), M, N, S and s antigens in over 3,000 blood donors. Samples from randomly selected blood donors from Delhi and nearby areas (both voluntary and replacement) were collected for extended antigen typing during the period January 2009 to January 2010. Antigens were typed via automated testing on the Galileo instrument using commercial antisera. A total of 3073 blood samples from donors were phenotyped. The prevalence of these antigens was found to be as follows in %: D: 93.6, C: 87, c: 58, E: 20, e: 98, K: 3.5, k: 99.97, F(a) : 87.4, Fy(b) : 57.6, Jk(a) : 81.5, Jk(b) : 67.4, M: 88.7, N: 65.4, S: 54.8 and s: 88.7. This study found the prevalence of the typed antigens among Indian blood donors to be statistically different to those in the Caucasian, Black and Chinese populations, but more similar to Caucasians than to the other racial groups.

Fellowship | Indian Academy of Sciences

Indian Academy of Sciences (India)

.D. (Bangalore), FNASc. Date of birth: 4 May 1968. Specialization: Astrosat Mission & UV Studies, Stellar Population, Nearby Galaxies, Star Clusters, Stellar Evolution, Galactic Dynamics Address: Indian Institute of Astrophysics, Sarjapur Road, ...

The evaluation of working casts prepared from digital impressions.

Science.gov (United States)

Hwang, Y C; Park, Y S; Kim, H K; Hong, Y S; Ahn, J S; Ryu, J J

2013-01-01

The aim of this study is to evaluate the reproducibility of working casts of a digital impression system by comparing them with the original, virtual, and rapid prototyping casts. A total of 54 cast sets in clinically stable occlusion were used. They were scanned by an iTero intraoral scanner and converted into STL format virtual casts. Rapid prototyping casts and polyurethane casts were fabricated from the iTero milling system based on the virtual casts. Several horizontal and vertical measurements were performed from the four types of casts, that is, original stone casts, virtual casts, rapid prototyping casts, and polyurethane casts of iTero. Measurement error, intraclass correlation coefficient (ICC), and differences among the casts were calculated and compared. Casts from iTero milling machines exhibited greater dimensional differences and lower ICC values than did other casts. In addition, many of the measurements of the iTero working casts showed statistically significant differences in comparison to the three other types of casts. In contrast, there were no statistically significant differences between the virtual and original casts. Virtual casts made by the iTero intraoral scanner exhibited excellent reproducibility. However, the casts from the iTero milling machine showed greater dimensional differences and lower reproducibility compared to other types of casts.

Temperature and microstructure characteristics of silumin casting AlSi9 made with investment casting method

Directory of Open Access Journals (Sweden)

S. Pietrowski

2011-07-01

Full Text Available This work presents the research result of the temperature distribution and the microstructure in certain parts of the field-glass body frame casting made from silumin AlSi9 using the investment casting method in the ceramic mould. It was proved that the highest temperature of the silumin appears in the sprue in which the silumin is in the liquid-solid state, though the process of silumin crystallization in the casting is finished. It was stated that in certain elements of the casting the side opposite to the runner crystallizes and cools fastest. The differences in the rate of crystalline growth and cooling of certain casting elements cause differ- ent microstructure in them which can also influence the mechanic properties.It is necessary to state that the temperature of the initial heating of the ceramic mold equal to 60oC guarantees obtaining of the castings without defects and of little porosity. Incomplete modification of the silumin with strontium causes silica precipitation to appear close to the spherical ones.

Asian Indians in America: The influence of values and culture on mental health.

Science.gov (United States)

Chandra, Rohit M; Arora, Lily; Mehta, Urvakhsh M; Asnaani, Anu; Radhakrishnan, Rajiv

2016-08-01

Asian Indians represent a significant portion of the largest growing race of Asians in the past decade in the United States. This selective review examines major cultural themes related to first- and second-generation Asian Indians living in the United States as they impact psychological and psychiatric dysfunction in this population. Specifically, we review the impact of Asian Indian culture on mental health, discuss the impact of acculturation and ethnic identity development on the mental health of Indian-Americans, and focus on typical mental health problems of Asian Indian adolescents, women and elderly in America. Finally, we provide a brief overview of empirically-supported treatment approaches and cultural considerations for additional treatments relevant to this population. This review is intended to provide an important foundation for more systematic empirically-driven investigation into better understanding how Asian Indian cultural themes impact mental health for Indian-Americans, and how to develop effective treatments for these issues in this cultural group. Copyright © 2015 Elsevier B.V. All rights reserved.

Segregation in cast products

Indian Academy of Sciences (India)

Unknown

The agreement with experimental data is mostly qualitative. The paper also ... For example, a high degree of positive segregation in the central region .... solute in a cast product, important ones being: size of casting, rate of solidification, mode.

An epidemic of tuberculosis with a high rate of tuberculin anergy among a population previously unexposed to tuberculosis, the Yanomami Indians of the Brazilian Amazon

Science.gov (United States)

Sousa, Alexandra O.; Salem, Julia I.; Lee, Francis K.; Verçosa, Maria C.; Cruaud, Philippe; Bloom, Barry R.; Lagrange, Philippe H.; David, Hugo L.

1997-01-01

A survey of an emerging tuberculosis epidemic among the Yanomami Indians of the Amazonian rain forest provided a unique opportunity to study the impact of tuberculosis on a population isolated from contact with the tubercle bacillus for millennia until the mid-1960s. Within the Yanomami population, an extraordinary high prevalence of active tuberculosis (6.4% of 625 individuals clinically examined) was observed, indicating a high susceptibility to disease, even among bacille Calmette–Guérin-vaccinated individuals. Observational studies on cell-mediated and humoral immune responses of the Yanomami Indians compared with contemporary residents of the region suggest profound differences in immunological responsiveness to Mycobacterium tuberculosis infection. Among the Yanomami, a very high prevalence of tuberculin skin test anergy was found. Of patients with active tuberculosis, 46% had purified protein derivative of tuberculosis reactions Yanomami also had higher titers of antibodies against M. tuberculosis glycolipid antigens (>70%) than the control subjects comprised of Brazilians of European descent (14%). The antibodies were mostly of the IgM isotype. Among the tuberculosis patients who also produced IgG antibodies, the titers of IgG4 were significantly higher among the Yanomami than in the control population. Although it was not possible to analyze T-cell responses or patterns of lymphokine production in vitro because of the remoteness of the villages from laboratory facilities, the results suggest that the first encounter of the Yanomami Indian population with tuberculosis engenders a diminished cell-mediated immune response and an increased production antibody responses, relative to other populations with extensive previous contact with the pathogen. These findings suggest that tuberculosis may represent a powerful selective pressure on human evolution that over centuries has shaped the nature of human immune responses to infection. PMID:9371828

An epidemic of tuberculosis with a high rate of tuberculin anergy among a population previously unexposed to tuberculosis, the Yanomami Indians of the Brazilian Amazon.

Science.gov (United States)

Sousa, A O; Salem, J I; Lee, F K; Verçosa, M C; Cruaud, P; Bloom, B R; Lagrange, P H; David, H L

1997-11-25

A survey of an emerging tuberculosis epidemic among the Yanomami Indians of the Amazonian rain forest provided a unique opportunity to study the impact of tuberculosis on a population isolated from contact with the tubercle bacillus for millennia until the mid-1960s. Within the Yanomami population, an extraordinary high prevalence of active tuberculosis (6.4% of 625 individuals clinically examined) was observed, indicating a high susceptibility to disease, even among bacille Calmette-Guérin-vaccinated individuals. Observational studies on cell-mediated and humoral immune responses of the Yanomami Indians compared with contemporary residents of the region suggest profound differences in immunological responsiveness to Mycobacterium tuberculosis infection. Among the Yanomami, a very high prevalence of tuberculin skin test anergy was found. Of patients with active tuberculosis, 46% had purified protein derivative of tuberculosis reactions Yanomami also had higher titers of antibodies against M. tuberculosis glycolipid antigens (>70%) than the control subjects comprised of Brazilians of European descent (14%). The antibodies were mostly of the IgM isotype. Among the tuberculosis patients who also produced IgG antibodies, the titers of IgG4 were significantly higher among the Yanomami than in the control population. Although it was not possible to analyze T-cell responses or patterns of lymphokine production in vitro because of the remoteness of the villages from laboratory facilities, the results suggest that the first encounter of the Yanomami Indian population with tuberculosis engenders a diminished cell-mediated immune response and an increased production antibody responses, relative to other populations with extensive previous contact with the pathogen. These findings suggest that tuberculosis may represent a powerful selective pressure on human evolution that over centuries has shaped the nature of human immune responses to infection.

Age and gender might influence big five factors of personality: a preliminary report in Indian population.

Science.gov (United States)

Magan, Dipti; Mehta, Manju; Sarvottam, Kumar; Yadav, Raj Kumar; Pandey, R M

2014-01-01

Age and gender are two important physiological variables which might influence the personality of an individual. The influence of age and gender on big five personality domains in Indian population was assessed in this cross-sectional study that included 155 subjects (female = 76, male = 79) aged from 16-75 years. Big five personality factors were evaluated using 60-item NEO-Five Factor Inventory (NEO-FFI) at a single point in time. Among the big five factors of personality, Conscientiousness was positively correlated (r = 0.195; P personality traits might change with age, and is gender-dependent.

Polydactyly in the American Indian.

Science.gov (United States)

Bingle, G J; Niswander, J D

1975-01-01

Polydactyly has an incidence in the American Indian twice that of Caucasians. A minimum estimate of this incidence is 2.40 per 1,000 live births. Preaxial type 1 has an incidence three to four times that reported for Caucasians or Negroes. The overall sex ratio in Indians is distorted with more males affected than females. The preaxial type 1 anomaly has a strong predilection for the hands and always is unilateral in contrast to postaxial type B where more than one-half are bilateral. The evidence to date, consisting of varying incidences of specific types of polydactyly among American whites, Negroes, and Indians in varying enviroments, suggests different gene-frequencies for polydactyly in each population. The incidence in Indians with 50% Caucasian admixture suggests that the factors controlling polydactyly are in large part genetically determined. Family studies and twin studies reported elsewhere offer no clear-cut genetic model which explains the highly variable gene frequencies.

Canadian Indian mortality during the 1980s.

Science.gov (United States)

Trovato, F

2000-01-01

This study concerns itself with an investigation of general and cause-specific mortality differentials between Canadian Registered Indians (a subset of all aboriginals) and the larger Canadian population over two points in time, 1981 and 1991. Multivariate analyses are executed separately across four segments of the life cycle: adulthood, infancy, early childhood and late childhood. With respect to adults, Indians share relatively high rates of suicide, homicide and accidental causes of death; over time, their conditional risks of death due to cancer and circulatory afflictions have gone up significantly. Mortality disadvantages for the Indians are also pronounced in infancy, early childhood (ages 1-4) and late childhood (ages 5-14). Suicide, accidents, and violence constitute serious problems among 5-14 year olds, while infectious/parasitic, respiratory and circulatory complications, plus accidents and violence, are principle killers in infancy. For children aged 1-4, respiratory problems and accidents/violence are prime causes of premature death. This less-than-optimal mortality profile is reflective of persistent problems associated with prolonged socioeconomic marginalization. The temporal pattern of change in chronic/degenerative disease mortality among adult Indians suggests a movement of this population toward a mature stage of epidemiological transition.

White cast iron with a nano-eutectic microstructure and high tensile strength and considerable ductility prepared by an aluminothermic reaction casting

International Nuclear Information System (INIS)

La, Peiqing; Wei, Fuan; Hu, Sulei; Li, Cuiling; Wei, Yupeng

2013-01-01

A white cast iron with nano-eutectic microstructure was prepared by an aluminothermic reaction casting. Microstructures of the cast iron were investigated by optical microscope (OM), electron probe micro-analyzer (EPMA), scanning electron microscope (SEM) and X-ray diffraction (XRD). Mechanical properties of the cast iron were tested. The results showed that the cast iron consisted of pearlite and cementite phases. Lamellar spacing of the pearlite phase was in a range of 110–275 nm and much smaller than that of the Ni-Hard 2 cast iron. Hardness of the cast iron was 552 Hv, tensile strength was 383 MPa, total elongation was 3% and compressive strength was 2224 MPa. Tensile strength and hardness of the cast iron was same to Ni-Hard 2 cast iron, besides the ductility was much better than that of the Ni-Hard 2 cast iron which is much expensive than the cast iron.

Method for casting thin metal objects

Science.gov (United States)

Pehrson, Brandon P; Moore, Alan F

2015-04-14

Provided herein are various embodiments of systems for casting thin metal plates and sheets. Typical embodiments include layers of mold cavities that are oriented vertically for casting the metal plates. In some embodiments, the mold cavities include a beveled edge such that the plates that are cast have a beveled edge. In some embodiments, the mold cavities are filled with a molten metal through an open horizontal edge of the cavity. In some embodiments, the mold cavities are filled through one or more vertical feed orifices. Further disclosed are methods for forming a thin cast metal plate or sheet where the thickness of the cast part is in a range from 0.005 inches to 0.2 inches, and the surface area of the cast part is in a range from 16 square inches to 144 square inches.

Changes in human gut flora with age: an Indian familial study.

Science.gov (United States)

Marathe, Nachiket; Shetty, Sudarshan; Lanjekar, Vikram; Ranade, Dilip; Shouche, Yogesh

2012-09-26

The gut micro flora plays vital role in health status of the host. The majority of microbes residing in the gut have a profound influence on human physiology and nutrition. Different human ethnic groups vary in genetic makeup as well as the environmental conditions they live in. The gut flora changes with genetic makeup and environmental factors and hence it is necessary to understand the composition of gut flora of different ethnic groups. Indian population is different in physiology from western population (YY paradox) and thus the gut flora in Indian population is likely to differ from the extensively studied gut flora in western population. In this study we have investigated the gut flora of two Indian families, each with three individuals belonging to successive generations and living under the same roof. Denaturation gradient gel electrophoresis analysis showed age-dependant variation in gut microflora amongst the individuals within a family. Different bacterial genera were dominant in the individual of varying age in clone library analysis. Obligate anaerobes isolated from individuals within a family showed age related differences in isolation pattern, with 27% (6 out of 22) of the isolates being potential novel species based on 16S rRNA gene sequence. In qPCR a consistent decrease in Firmicutes number and increase in Bacteroidetes number with increasing age was observed in our subjects, this pattern of change in Firmicutes / Bacteroidetes ratio with age is different than previously reported in European population. There is change in gut flora with age amongst the individuals within a family. The isolation of high percent of novel bacterial species and the pattern of change in Firmicutes /Bacteroidetes ratio with age suggests that the composition of gut flora in Indian individuals may be different than the western population. Thus, further extensive study is needed to define the gut flora in Indian population.

Indian populations

CERN Multimedia

Spahni,J

1974-01-01

Le Prof. J.C. Spahni qui a parcouru les Andes, Vénezuela etc. parle de ses expériences et connaissances qu'il a vécu au cours des 14 ans parmi les populations indiennes de la Cordillière des Andes. Il a ramené des objets artisanals indiens lesquels l'auditoire peut acquérir. L'introduction-conférence est suivi d'un film, commenté par lui-même; après l'entracte il y un débat-dialogue avec le public.

Social Network Analysis of the Caste-Based Reservation System in India

OpenAIRE

Iyengar, S. R. S.; Parasuram, Aishwarya; Saini, Jaspal Singh

2015-01-01

It has been argued that the reservation system in India, which has existed since the time of Indian Independence (1947), has caused more havoc and degradation than progress. This being a popular public opinion, these notions have not been based on any rigorous scientific study or research. In this paper, we revisit the cultural divide among the Indian population from a purely social networks based approach. We study the reservation system in detail, starting from its past and observing its ef...

The Variations in Calcaneal Articular Facets In North Indian Population and its Clinical Implication

Directory of Open Access Journals (Sweden)

Seema

2012-01-01

Full Text Available Aims and Objectives- To know the most common type of calcanei in North Indian population and itsclinical importance. There are three articular facets on superior surface of calcaneus- anterior, middle andposterior. Three types of calcanei are noted according to number and arrangement of the articular facets-type A, B and C. Methodology - The present studywas done on 300 dry adult human calcanei of unknownsex taken from Department of Anatomy Sri Guru Ram Das Institute of Medical Sciences and ResearchVallah (Amritsar. Results- In our study Type B was found as the most common type. Type A is the nextmost common. Interpretation- The talocalcaneal joint is important in arthritis and coalition, flat foot, valgus deformity, congenital anomalies and intra articular fractures.

Prospective Evaluation of Psychosocial Impact after One Year of Orthodontic Treatment Using PIDAQ Adapted for Indian Population.

Science.gov (United States)

Garg, Kanika; Tripathi, Tulika; Rai, Priyank; Sharma, Nandini; Kanase, Anup

2017-08-01

The impact of dental appearance, malocclusion and treatment for the same on psychological and functional well-being has drawn increasing attention over the past decade. Various psychometric instruments alongside normative indices have been used to predict orthodontic concerns. Evaluating the patients' experience during the orthodontic treatment can help us understand the true benefits and advantages of orthodontic therapy. The aim of the present study was to evaluate the change in the psychosocial impact of malocclusion using the Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) adapted for the Indian population after one year of fixed orthodontic treatment. This interventional study was conducted on 93 patients requiring fixed orthodontic treatment. Brazilian, Chinese, Spanish, Nepali and Moroccan versions of the PIDAQ have been published but the questionnaire is not available in Hindi. In the present study, the original PIDAQ was translated into Hindi language to adapt it for the Indian population and was validated by back translation and pretest. All the subjects answered the Hindi version of the questionnaire at pretreatment (T1) and at one year of orthodontic treatment (T2). Additionally, the Index of Orthodontic Treatment Need (IOTN) was applied to measure the severity and self-perception of malocclusion. The data were analysed using paired t-test, Wilcoxon signed rank test and Kruskal-Wallis test. Significant reduction was found in the total PIDAQ score and each factor's score (porthodontic treatment. There was a positive association of the psychosocial impact of malocclusion with the IOTN-AC (IOTN-Aesthetic Component). Adolescent females were found to be most concerned with their dentofacial appearance. Results showed significant improvement in the psychosocial impact of malocclusion with a reduction in the self-perceived needs of patients with orthodontic treatment. The psychometric instrument used may be recommended as an Oral Health Related

Modelling of flow phenomena during DC casting

NARCIS (Netherlands)

Zuidema, J.

2005-01-01

Modelling of Flow Phenomena during DC Casting Jan Zuidema The production of aluminium ingots, by semi-continuous casting, is a complex process. DC Casting stands for direct chill casting. During this process liquid aluminium transforms to solid aluminium while cooling down. This is not an

Mechanical properties of as-cast microalloyed steels produced via investment casting

International Nuclear Information System (INIS)

Najafi, H.; Rassizadehghani, J.; Norouzi, S.

2011-01-01

Tensile and room temperature Charpy V-notch impact tests were used to evaluate the variations in the as-cast mechanical properties of a low-carbon steel produced via shell mould investment casting and containing combinations of vanadium, niobium and titanium. Tensile results indicate that the yield strength and ultimate tensile strength (UTS) have increased up to respectively 615 MPa and 770 MPa due to the fine-scale microalloy precipitates in the microalloyed samples. Room temperature impact test results show that while addition of vanadium individually has not changed the impact energy, Nb has decreased it considerably. However, examination of fracture surfaces reveals that all microalloyed samples have failed by transgranular cleavage. Based on the transmission electron microscope (TEM) studies, it seems that carbonitrides being greater than 50 nm in size and formed along prior austenite grain boundaries before γ transformation are responsible for the observed reduction in impact energies and brittle fracture. In comparison to sand mould casting, the yield and UTS obtained from investment casting are superior. Furthermore, although the impact energies of Nb-containing alloys are approximately the same as those obtained from sand moulds, the impact energy of the alloy containing only vanadium has improved considerably.

Correlation of chronological, skeletal, and dental age in North Indian population

Directory of Open Access Journals (Sweden)

Madhurima Nanda

2017-01-01

Full Text Available Aim and Objectives: The aim of the study was to find out the correlation between chronological, dental, and skeletal age. Materials and Methods: Lateral cephalograms and orthopantomograms of 100 subjects of age ranging 9–14 years were obtained for the estimation of skeletal and dental age. Dental age was assessed using Demirjian's method; skeletal age was assessed using the new improved version of the cervical vertebral maturation method given by Baccetti, Franchi, and McNamara. Statistical analysis was carried out. Student's t-test and Spearman's coefficient correlation were used to assess the relation between chronological, skeletal, and dental age. Results: The Spearman's correlation coefficient was 0.777 (P < 0.001 between chronological and dental age, 0.516 (P < 0.001 between chronological and skeletal age, and 0.563 (P < 0.001 between dental and skeletal age. Conclusion: There is a good correlation between chronological and dental age in North Indian population which was higher for males as compared to females. A moderate correlation was found between chronological and skeletal age as well as between dental and skeletal age.

Morphometric study of tensor of vastus intermedius in South Indian population.

Science.gov (United States)

Veeramani, Raveendranath; Gnanasekaran, Dhivyalakshmi

2017-03-01

Tensor of vastus intermedius is a newly discovered muscle located between vastus lateralis and vastus intermedius. The purpose of this study was to investigate the detailed morphology of tensor of vastus intermedius, specifically to provide data pertaining to the attachments, innervations, variation in the types and its morphometry in South Indian population. The tensor of vastus intermedius was studied in thirty six cadaveric lower limbs using macrodissection techniques. The origin of the muscle was from upper part of intertrochanteric line and anterior part of greater trochanter of femur inserted to medial aspect of upper border of patella. The muscle was classified into four types based on the origin and also the aponeurosis course with independent type (type 1) being common. The mean and standard deviation of the length of tensor of vastus intermedius and aponeurosis were 145.40±37.55 mm and 193.55±42.32 mm, respectively. The results of the study suggest that tensor of vastus intermedius is variable and the information provided regarding the attachments, types and quantitative data will contribute to the existing knowledge of the muscle.

Spatial Bimetallic Castings Manufactured from Iron Alloys

Directory of Open Access Journals (Sweden)

M. Cholewa

2007-07-01

Full Text Available In this paper a conception for manufacturing method of skeleton castings with composite features was shown. Main application of such castings are the working organs of machines subjected to intensive abrasive and erosive wear. Skeleton geometry was based on three-dimensional cubic net consisting of circular connectors and nodes joining 6 connectors according to Cartesian co-ordinate system. Dimension of an elementary cell was equal to 10 mm and diameter of single connector was equal to 5 mm. For bimetallic castings preparation two Fe based alloys were used: L25SHMN cast steel for skeleton substrate and ZlCr15NiMo cast iron for working part of the casting. In presented work obtained structure was analyzed with indication of characteristic regions. Authors described phenomena occurring at the alloys interface and phases in transition zone. A thesis was formulated concerning localization of transition zone at the cast iron matrix – cast steel reinforcement interface. Direction of further studies were indicated.

Modelling of Filling, Microstructure Formation, Local Mechanical Properties and Stress – Strain Development in High-Pressure Die Cast Aluminium Castings

DEFF Research Database (Denmark)

Kotas, Petr; Hattel, Jesper Henri; Thorborg, Jesper

2009-01-01

.e. whether the casting is based on cast iron- or aluminium-alloys. The distribution of local properties in a casting might vary substantially which makes it complex to optimize the casting with good accuracy. Often, mechanical simulations of the load situation are based on the assumption that the cast...... in an aluminium alloy is considered including simulation of the entire casting process with emphasis on microstructure formation related to mechanical properties such as elastic modulus, yield stress, ultimate strength and elongation as well as residual stresses. Subsequently, the casting is subjected to service...... loads and the results of this analysis are discussed in relation to the predicted local properties as well as the residual stresses originating from the casting simulation....

Health and Quality of Life in Northern Plains Indians

Science.gov (United States)

Quality of life and standard of living are consistently depicted as indigent among American Indian and Alaska Native (AI/AN) populations. American Indians (AI) are among the most heterogeneous and impoverished ethnic groups in the U.S.,have the highest per capita suicide rate at 247% of the national...

Prevalence of primary open-angle glaucoma in an urban south Indian population and comparison with a rural population. The Chennai Glaucoma Study.

Science.gov (United States)

Vijaya, Lingam; George, Ronnie; Baskaran, M; Arvind, Hemamalini; Raju, Prema; Ramesh, S Ve; Kumaramanickavel, Govindasamy; McCarty, Catherine

2008-04-01

To estimate the prevalence and risk factors of primary open-angle glaucoma (POAG) in an urban population and compare the same with that of our published rural population data in southern India. Population-based cross-sectional study. Four thousand eight hundred subjects 40 years or older were selected using a multistage random cluster sampling procedure in Chennai city. Three thousand eight hundred fifty (80.2%) subjects underwent a complete ophthalmic examination, including applanation tonometry, gonioscopy, pachymetry, optic disc photography, and automated perimetry. Glaucoma was diagnosed using the International Society of Geographical and Epidemiological Ophthalmology Classification. The distribution of intraocular pressure (IOP) and vertical cup-to-disc ratio (VCDR) was obtained from the right eye of the 2532 subjects with normal suprathreshold visual fields. Mean IOP was 16.17+/-3.74 mmHg (97.5th and 99.5th percentiles, 24 mmHg and 30 mmHg). The mean VCDR was 0.43+/-0.17 (97.5th and 99.5th percentiles, 0.7 and 0.8). One hundred thirty-five (64 men, 71 women) subjects had POAG (3.51%; 95% confidence interval [CI], 3.04-4.0). Primary open-angle glaucoma subjects (58.4+/-11.3 years) were older (P or =40-year-old south Indian urban population was 3.51%, higher than that of the rural population. The prevalence increased with age, and >90% were not aware of the disease.

Global Population Density Grid Time Series Estimates

Data.gov (United States)

National Aeronautics and Space Administration — Global Population Density Grid Time Series Estimates provide a back-cast time series of population density grids based on the year 2000 population grid from SEDAC's...

Risk factors for choledocholithiasis in a south Indian population: a case-control study.

Science.gov (United States)

Chandran, Alexander Palapatti; Sivarajan, Ramya Ramakrishnan; Srinivas, Melpakkam; Srinivasan, Vijaya; Venkataraman, Jayanthi

2013-11-01

To identify risk factors for common bile duct (CBD) stones in a south Indian population. Demographic characteristics and diet details were obtained from patients with isolated CBD stones (Gp I) and those with combined CBD and gallstones (Gp II) and age- and sex-matched controls. The risk factors were compared between the two groups. The demographic characteristics were similar between the two groups and matched controls. The significant risk factors for Gp I were infrequent consumption of green vegetable (odds ratio (OR), 2.3; p 3 times per week) of spices (OR, 2.8; p oil (p oil intake (251 + 105 vs. 292 + 89 mL; p CBD stones in both groups were associated with reduced intake of sugar and green vegetables. Our findings need to be validated in larger studies.

Cast dielectric composite linear accelerator

Science.gov (United States)

Sanders, David M [Livermore, CA; Sampayan, Stephen [Manteca, CA; Slenes, Kirk [Albuquerque, NM; Stoller, H M [Albuquerque, NM

2009-11-10

A linear accelerator having cast dielectric composite layers integrally formed with conductor electrodes in a solventless fabrication process, with the cast dielectric composite preferably having a nanoparticle filler in an organic polymer such as a thermosetting resin. By incorporating this cast dielectric composite the dielectric constant of critical insulating layers of the transmission lines of the accelerator are increased while simultaneously maintaining high dielectric strengths for the accelerator.

Evaluation of porosity in Al alloy die castings

Directory of Open Access Journals (Sweden)

M. Říhová

2012-01-01

Full Text Available Mechanical properties of an Al-alloy die casting depend significantly on its structural properties. Porosity in Al-alloy castings is one of the most frequent causes of waste castings. Gas pores are responsible for impaired mechanical-technological properties of cast materials. On the basis of a complex evaluation of experiments conducted on AlSi9Cu3 alloy samples taken from the upper engine block which was die- cast with and without local squeeze casting it can be said that castings manufactured without squeeze casting exhibit maximum porosity in the longitudinal section. The area without local squeeze casting exhibits a certain reduction in mechanical properties and porosity increased to as much as 5%. However, this still meets the norms set by SKODA AUTO a.s.

Some Theoretical Considerations on Caste

Directory of Open Access Journals (Sweden)

Madhusudan Subedi

2014-05-01

Full Text Available Caste as a system of social stratification was an encompassing system in the past. There was reciprocal system of exchange goods and services. With time, occupation and mode of generation of livelihood of various caste groups changed, and the traditional form of jajmani system fizzled out. This paper provides an account of changing perspectives of caste relations in social science writing and political discourse. The discourse of caste has been shifted from ritual hierarchy and social discrimination to an instrument to mobilize people for economic and political gain. DOI: http://dx.doi.org/10.3126/dsaj.v7i0.10437 Dhaulagiri Journal of Sociology and Anthropology Vol. 7, 2013; 51-86

Association of tinnitus and hearing loss in otological disorders: a decade-long epidemiological study in a South Indian population

Directory of Open Access Journals (Sweden)

Santoshi Kumari Manche

Full Text Available Abstract Introduction: Tinnitus is a common disorder that occurs frequently across all strata of population and has an important health concern. Tinnitus is often associated with different forms of hearing loss of varying severity. Objective: The present study aimed to identify the association of tinnitus with hearing loss in various otological disorders of a South Indian population. Methods: A total of 3255 subjects referred to the MAA ENT Hospital, Hyderabad, from 2004 to 2014, affected with various otological diseases have been included in the present cross-sectional study. Diagnosis of the diseases was confirmed by an ear, nose, and throat (ENT specialist using detailed medical and clinical examination. Statistical analysis was performed using the χ 2 test and binary logistic regression. Results: Tinnitus was observed in 29.3% (956 of the total study subjects that showed an increased prevalence in greater than 40 years of age. There was a significant increase in risk of tinnitus with middle (OR = 1.79, 95% CI = 1.02-3.16 and inner (OR = 3.00, 95% CI = 1.65-5.45 inner ear diseases. It was noted that 96.9% (n = 927 of the tinnitus subjects was associated with hearing loss. Otitis media (60.9%, presbycusis (16.6% and otosclerosis (14.3% are the very common otological disorders leading to tinnitus. Tinnitus was significantly associated with higher degree of hearing loss in chronic suppurative otitis media (CSOM subjects. Conclusion: The present study could identify the most prevalent otological risk factors leading to development of tinnitus with hearing loss in a South Indian population.

Role of the APOB Gene Polymorphism (c.12669G>A, p. Gln4154Lys) in Coronary Artery Disease in the Indian Punjabi Population.

Science.gov (United States)

Sharma, R; Mahajan, M; Singh, B; Singh, G; Singh, P

2011-12-01

High concentration of apolipoprotein B (apoB) is a risk factor for coronary artery disease (CAD). The association of the APOB gene polymorphism c.12669G>A, p.Gln4154Lys with the risk of CAD varies considerably in different populations. The present study represents the first investigation regarding the role of this APOB gene polymorphism with CAD in the Indian Punjabi population. We have studied the APOB gene polymorphism c.12669G>A, p.Gln4154Lys and its relationship with lipid, apoB, low-density lipoprotein (LDL) heterogeneity and oxidation in subjects suffering from CAD. The study was conducted on 87 patients with CAD; 75 healthy subjects served as controls. Polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) was used to determine the DNA polymorphism in the APOB gene. Frequency of R- (mutant) allele was significantly high (p 0.05). However, serum apoB levels were significantly raised (p Punjabi population. Overall, it may be concluded that the R- allele might be associated with increased susceptibility towards CAD development in the Indian Punjabi population, and one of the linking factor is the elevation in serum apoB levels. However, this association needs further evaluation in a larger population. Secondly, the robust mechanism behind the positive association of the R- allele with raised serum apoB levels needs to be explored, which might be helpful in the strengthening the observed results.

Population structure of Helicobacter pylori among ethnic groups in Malaysia: recent acquisition of the bacterium by the Malay population.

Science.gov (United States)

Tay, Chin Yen; Mitchell, Hazel; Dong, Quanjiang; Goh, Khean-Lee; Dawes, Ian W; Lan, Ruiting

2009-06-19

Helicobacter pylori is a major gastric bacterial pathogen. This pathogen has been shown to follow the routes of human migration by their geographical origin and currently the global H. pylori population has been divided into six ancestral populations, three from Africa, two from Asia and one from Europe. Malaysia is made up of three major ethnic populations, Malay, Chinese and Indian, providing a good population for studying recent H. pylori migration and admixture. Seventy eight H. pylori isolates, including 27 Chinese, 35 Indian and 16 Malay isolates from Malaysia were analysed by multilocus sequence typing (MLST) of seven housekeeping genes and compared with the global MLST data. STRUCTURE analysis assigned the isolates to previously identified H. pylori ancestral populations, hpEastAsia, hpAsia2 and hpEurope, and revealed a new subpopulation, hspIndia, within hpAsia2. Statistical analysis allowed us to identify population segregation sites that divide the H. pylori populations and the subpopulations. The majority of Malay isolates were found to be grouped together with Indian isolates. The majority of the Malay and Indian H. pylori isolates share the same origin while the Malaysian Chinese H. pylori is distinctive. The Malay population, known to have a low infection rate of H. pylori, was likely to be initially H. pylori free and gained the pathogen only recently from cross infection from other populations.

Fabrication of sacrificial anode cathodic protection through casting method

International Nuclear Information System (INIS)

Mohd Sharif Sattar; Muhamad Daud; Siti Radiah Mohd Kamarudin; Azali Muhamad; Zaiton Selamat; Rusni Rejab

2007-01-01

Aluminum is one of the few metals that can be cast by all of the processes used in casting metals. These processes consist of die casting, permanent mold casting, sand casting (green sand and dry sand), plaster casting, investment casting, and continuous casting. Other processes such as lost foam, squeeze casting, and hot isostatic pressing are also used. Permanent mold casting method was selected in which used for fabricating of sacrificial anode cathodic protection. This product was ground for surface finished and fabricated in the cylindrical form and reinforced with carbon steel at a center of the anode. (Author)

Association between methylenetetrahydrofolate reductase (MTHFR C677T gene polymorphism and risk of ischemic stroke in North Indian population: A hospital based case–control study

Directory of Open Access Journals (Sweden)

Amit Kumar

2016-10-01

Conclusion: Findings of the present study suggest that MTHFR C677T gene polymorphism might be a risk factor of IS mainly for SVD subtypes of IS in North Indian population. Further large prospective studies are required to confirm these findings.

14 CFR 29.621 - Casting factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Casting factors. 29.621 Section 29.621... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.621 Casting factors. (a... approved specifications. Paragraphs (c) and (d) of this section apply to structural castings except...

Cast erosion from the cleaning of debris after the use of a cast trimmer.

Science.gov (United States)

Hansen, Paul A; Beatty, Mark W

2017-02-01

Whether using tap water to rinse off debris will make a clinical difference to the surface detail of a gypsum cast is unknown. In addition, how best to remove debris from the cast is unknown. The purpose of this in vitro study was to evaluate the efficiency of different methods of cleaning a gypsum cast after trimming and the effect of short-term exposure to tap water on the surface quality of the cast. A die fitting American National Standards Institute/American Dental Association specification 25 (International Standards Organization specification 6873) for dental gypsum products was embedded in a Dentoform with the machined lines positioned at the same level as the occlusal surface of the posterior teeth. A flat plate was used to ensure that the plane of occlusion for the die was at the same position as the posterior teeth. Forty polyvinyl siloxane impressions of the Dentoform were made and poured with vacuum-mixed improved Type IV dental stone. Each cast was inspected for the accurate reproduction of the lines. The base of the 2-stage pour was trimmed with a cast trimmer with water, and surface debris was removed by rinsing by hand under tap water for 10 seconds, by brushing the cast with a soft toothbrush for 10 seconds, or by resoaking the cast and using a soft camel hair brush in slurry water for 10 seconds. The amount of debris was evaluated on a scale of 1 to 4, and the quality of the 20-μm line was evaluated on a scale of 1 to 4 under ×15 magnification. The nonparametric Kruskal-Wallis ranks test was used to identify significant differences among the different cleaning methods (α=.05). Results of the Kruskal-Wallis and Kruskal-Wallis Z-value tests demonstrated that all cleaning methods produced cleaner casts than were observed for uncleansed controls (P<.001), but no differences in debris removal were found among the different cleaning methods (.065≤P≤.901). The ability to see the quality of a 20-μm line (P=.974) was not statistically different

The temperature gradient on section of casting in process of primary crystallization of chromium cast iron

Directory of Open Access Journals (Sweden)

A. Studnicki

2008-08-01

Full Text Available The methodology of defining in article was introduced the temperature gradient in process of primary crystallization during cooling the casting from chromium cast iron on basis of measurements of thermal field in test DTA-K3. Insert also the preliminary results of investigations of influence temperature gradient on structure of studied wear resistance chromium cast iron.

Casting Footprints for Eternity

Science.gov (United States)

1999-01-01

Apollo 11 Astronaut Buzz Aldrin has his footprints casted during the dedication ceremony of the rocket fountain at Building 4200 at Marshall Space Flight Center. The casts of Aldrin's footprints will be placed in the newly constructed Von Braun courtyard representing the accomplishments of the Apollo 11 lunar landing.

Casting fine grained, fully dense, strong inorganic materials

Science.gov (United States)

Brown, Sam W.; Spencer, Larry S.; Phillips, Michael R.

2015-11-24

Methods and apparatuses for casting inorganic materials are provided. The inorganic materials include metals, metal alloys, metal hydrides and other materials. Thermal control zones may be established to control the propagation of a freeze front through the casting. Agitation from a mechanical blade or ultrasonic energy may be used to reduce porosity and shrinkage in the casting. After solidification of the casting, the casting apparatus may be used to anneal the cast part.

14 CFR 25.621 - Casting factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Casting factors. 25.621 Section 25.621... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction General § 25.621 Casting factors. (a... meet approved specifications. Paragraphs (c) and (d) of this section apply to any structural castings...

14 CFR 27.621 - Casting factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Casting factors. 27.621 Section 27.621... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.621 Casting factors. (a) General... approved specifications. Paragraphs (c) and (d) of this section apply to structural castings except...

Abrasion Resistance of as-Cast High-Chromium Cast Iron

Directory of Open Access Journals (Sweden)

Pokusová Marcela

2014-12-01

Full Text Available High chromium cast irons are widely used as abrasion resistant materials. Their properties and wear resistance depend on carbides and on the nature of the matrix supporting these carbides. The paper presents test results of irons which contain (in wt.% 18-22 Cr and 2-5 C, and is alloyed by 1.7 Mo + 5 Ni + 2 Mn to improve the toughness. Tests showed as-cast irons with mostly austenitic matrix achieved hardness 36-53 HRC but their relative abrasion-resistance was higher than the tool steel STN 19436 heat treated on hardness 60 HRC.

Prevalence of risk factors for coronary artery disease in an urban Indian population

Science.gov (United States)

Sekhri, T; Kanwar, R S; Wilfred, R; Chugh, P; Chhillar, M; Aggarwal, R; Sharma, Y K; Sethi, J; Sundriyal, J; Bhadra, K; Singh, S; Rautela, N; Chand, Tek; Singh, M; Singh, S K

2014-01-01

Objective The objective of this study was to assess the prevalence of risk factors for coronary artery disease (CAD) in government employees across India. Methods The study population consisted of government employees in different parts of India ({n=10 642 men and n=1966 women; age 20–60 years}) and comprised various ethnic groups living in different environmental conditions. Recruitment was carried out in 20 cities across 14 states, and in one union territory. All selected individuals were subjected to a detailed questionnaire, medical examinations and anthropometric measurements. Blood samples were collected for blood glucose and serum lipid profile estimation, and resting ECG was recorded. Results were analysed using appropriate statistical tools. Results The study revealed that 4.6% of the study population had a family history of premature CAD. The overall prevalence of diabetes was 16% (5.6% diagnosed during the study and the remaining 10.4% already on medication). Hypertension was present in 21% of subjects. The prevalence of dyslipidemia was significantly high, with 45.6% of study subjects having a high total cholesterol/high density lipoprotein ratio. Overall, 78.6% subjects had two or more risk factors for CAD. Conclusions The present study demonstrates a high prevalence of CAD risk factors in the Indian urban population. Therefore, there is an immediate need to initiate measures to raise awareness of these risk factors so that individuals at high risk for future CAD can be managed. PMID:25488095

Population differentiation or species formation across the Indian and the Pacific Oceans? An example from the brooding marine hydrozoan Macrorhynchia phoenicea.

Science.gov (United States)

Postaire, Bautisse; Gélin, Pauline; Bruggemann, J Henrich; Pratlong, Marine; Magalon, Hélène

2017-10-01

Assessing population connectivity is necessary to construct effective marine protected areas. This connectivity depends, among other parameters, inherently on species dispersal capacities. Isolation by distance (IBD) is one of the main modes of differentiation in marine species, above all in species presenting low dispersal abilities. This study reports the genetic structuring in the tropical hydrozoan Macrorhynchia phoenicea α ( sensu Postaire et al ., 2016a), a brooding species, from 30 sampling sites in the Western Indian Ocean and the Tropical Southwestern Pacific, using 15 microsatellite loci. At the local scale, genet dispersal relied on asexual propagation at short distance, which was not found at larger scales. Considering one representative per clone, significant positive F IS values (from -0.327*** to 0.411***) were found within almost all sites. Gene flow was extremely low at all spatial scales, among sites within islands (11,000 km distance), with significant pairwise F ST values (from 0.035*** to 0.645***). A general pattern of IBD was found at the Indo-Pacific scale, but also within ecoregions in the Western Indian Ocean province. Clustering and network analyses identified each island as a potential independent population, while analysis of molecular variance indicated that population genetic differentiation was significant at small (within island) and intermediate (among islands within province) spatial scales. As shown by this species, a brooding life cycle might be corollary of the high population differentiation found in some coastal marine species, thwarting regular dispersal at distances more than a few kilometers and probably leading to high cryptic diversity, each island housing independent evolutionary lineages.

CASTING METHOD AND APPARATUS

Science.gov (United States)

Gray, C.F.; Thompson, R.H.

1958-10-01

An improved apparatus for the melting and casting of uranium is described. A vacuum chamber is positioned over the casting mold and connected thereto, and a rod to pierce the oxide skin of the molten uranium is fitted into the bottom of the melting chamber. The entire apparatus is surrounded by a jacket, and operations are conducted under a vacuum. The improvement in this apparatus lies in the fact that the top of the melting chamber is fitted with a plunger which allows squeezing of the oxide skin to force out any molten uranium remaining after the skin has been broken and the molten charge has been cast.

Comparison of Corneal Biomechanical Properties between Indian and Chinese Adults.

Science.gov (United States)

Chua, Jacqueline; Nongpiur, Monisha E; Zhao, Wanting; Tham, Yih Chung; Gupta, Preeti; Sabanayagam, Charumathi; Aung, Tin; Wong, Tien Yin; Cheng, Ching-Yu

2017-09-01

To investigate the difference in corneal hysteresis (CH) and corneal resistance factor (CRF) between Indian and Chinese populations. Population-based cross-sectional study. Three hundred eighty-two Singaporean Indian persons and 764 Singaporean Chinese 50 years of age or older were included from the Singapore Indian Eye Study and Singapore Chinese Eye Study, respectively. Participants underwent standardized systemic and ocular examinations and interviewer-administered questionnaires for risk factor assessment. The CH and CRF were measured with the Ocular Response Analyzer (Reichert Ophthalmic Instruments, Buffalo, NY). Information on genetic ancestry was derived using principal component analysis. Linear regression models were used to investigate the association of CH and CRF with potential risk factors. Corneal hysteresis and CRF. After excluding participants with a history of intraocular surgery, a diagnosis of glaucoma suspect or glaucoma, refractive surgery, or presence of corneal abnormalities, CH and CRF readings were available for 382 Indian persons. For each Indian participant, 2 Chinese participants were selected and matched for age and gender (n = 764). There were no differences in the clinical measurements of CH (10.6±1.6 mmHg; P = 0.670) or CRF (10.3±1.7 mmHg; P = 0.103) between the ethnic groups. However, after adjusting for covariates, Indian persons had, on average, 0.18-mmHg higher CH levels than in Chinese (95% confidence interval [CI], 0.02-0.38; P = 0.031). Consistently, CH level was correlated significantly with genetic ancestry in the Southeast Asian population. Corneal resistance factor level was not associated independently with self-reported ethnicity (95% CI, -0.10 to 0.29; P = 0.335). Chinese have lower CH than Indian persons, and this disparity may reflect biomechanical differences of the cornea. Copyright © 2017 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

Pressure distribution in centrifugal dental casting.

Science.gov (United States)

Nielsen, J P

1978-02-01

Equations are developed for liquid metal pressure in centrifugal dental casting, given the instantaneous rotational velocity, density, and certain dimensions of the casting machine and casting pattern. A "reference parabola" is introduced making the fluid pressure concept more understandable. A specially designed specimen demonstrates experimentally the reference parabola at freezing.

Cultural Difference as the Basis for Creative Education at the Institute of American Indian Arts.

Science.gov (United States)

Institute of American Indian Arts, Santa Fe, NM.

The task of setting up and administering educational programs for the American Indian has been fraught with seemingly insurmountable problems and inbuilt frustrations for both the Indian population and the Federal Government. Many programs are now under way to increase Indian control of Indian affairs, including their own educational institutions.…

SOD1 Gene +35A/C (exon3/intron3 Polymorphism in Type 2 Diabetes Mellitus among South Indian Population

Directory of Open Access Journals (Sweden)

K. Nithya

2016-01-01

Full Text Available Superoxide dismutase is an antioxidant enzyme that is involved in defence mechanisms against oxidative stress. Cu/Zn SOD is a variant that is located in exon3/intron3 boundary. The aim of the present study was to investigate whether the Cu/Zn SOD (+35A/C gene polymorphism is associated with the susceptibility to type 2 diabetes mellitus among south Indian population. The study included patients with type 2 diabetes mellitus (n=100 and healthy controls (n=75. DNA was isolated from the blood and genotyping of Cu/Zn SOD gene polymorphism was done by polymerase chain reaction based restriction fragment length polymorphism method. Occurrence of different genotypes and normal (A and mutant (C allele frequencies were determined. The frequency of the three genotypes of the total subjects was as follows: homozygous wild-type A/A (95%, heterozygous genotype A/C (3%, and homozygous mutant C/C (2%. The mutant (C allele and the mutant genotypes (AC/CC were found to be completely absent among the patients with type 2 diabetes mellitus. Absence of mutant genotype (CC shows that the Cu/Zn SOD gene polymorphism may not be associated with the susceptibility to type 2 diabetes mellitus among south Indian population.

Field populations of native Indian honey bees from pesticide intensive agricultural landscape show signs of impaired olfaction

Science.gov (United States)

Chakrabarti, Priyadarshini; Rana, Santanu; Bandopadhyay, Sreejata; Naik, Dattatraya G.; Sarkar, Sagartirtha; Basu, Parthiba

2015-07-01

Little information is available regarding the adverse effects of pesticides on natural honey bee populations. This study highlights the detrimental effects of pesticides on honey bee olfaction through behavioural studies, scanning electron microscopic imaging of antennal sensillae and confocal microscopic studies of honey bee brains for calcium ions on Apis cerana, a native Indian honey bee species. There was a significant decrease in proboscis extension response and biologically active free calcium ions and adverse changes in antennal sensillae in pesticide exposed field honey bee populations compared to morphometrically similar honey bees sampled from low/no pesticide sites. Controlled laboratory experiments corroborated these findings. This study reports for the first time the changes in antennal sensillae, expression of Calpain 1(an important calcium binding protein) and resting state free calcium in brains of honey bees exposed to pesticide stress.

Clinical Spectrum, Risk Factors, and Behavioral Abnormalities among Dementia Subtypes in a North Indian Population: A Hospital-Based Study

Directory of Open Access Journals (Sweden)

Suman Kushwaha

2017-07-01

Full Text Available Background: As variability in the clinical profile of dementia subtypes had been reported with regional differences across the world, we conducted a retrospective hospital-based study in a North Indian population. Methods: We retrieved patient records from 2007 to 2014 for details of clinical evaluation, diagnosis, neuroimaging, biochemical investigations, and follow-up of 1,876 patients with dementia (PwD, and the data were analyzed using descriptive statistics. Results: Of the total PwD, Alzheimer disease (AD accounted for 30% followed by vascular dementia (VaD 26%, mixed dementia (MD 21%, Parkinson-related dementia 11%, frontotemporal dementia (FTD 7%, and infective dementia 5%. Of all PwD excluding the infective group (n = 1,777, 63% were men, 39% were from rural areas, 87% had behavioral abnormalities along with cognitive deficits, and 73% had impaired ADLs. Among dementia subtypes, a positive family history, cardiovascular and metabolic risk factors, and behavioral abnormalities were found to be distributed. However, there existed a predominance of specific behavioral pattern in each subtype. The mean duration of follow-up varied from 2.9 ± 2.3 (VaD to 3.6 ± 2.1 (AD and greater than 30% were found to be stable on treatment (except in dementia with Lewy body. Conclusions: This large hospital-based study provides a distribution pattern and clinical spectrum of dementia subtypes in a North Indian population.

Phylogeography of the crown-of-thorns starfish in the Indian Ocean.

Directory of Open Access Journals (Sweden)

Catherine Vogler

Full Text Available Understanding the limits and population dynamics of closely related sibling species in the marine realm is particularly relevant in organisms that require management. The crown-of-thorns starfish Acanthaster planci, recently shown to be a species complex of at least four closely related species, is a coral predator infamous for its outbreaks that have devastated reefs throughout much of its Indo-Pacific distribution.In this first Indian Ocean-wide genetic study of a marine organism we investigated the genetic structure and inferred the paleohistory of the two Indian Ocean sister-species of Acanthaster planci using mitochondrial DNA sequence analyses. We suggest that the first of two main diversification events led to the formation of a Southern and Northern Indian Ocean sister-species in the late Pliocene-early Pleistocene. The second led to the formation of two internal clades within each species around the onset of the last interglacial. The subsequent demographic history of the two lineages strongly differed, the Southern Indian Ocean sister-species showing a signature of recent population expansion and hardly any regional structure, whereas the Northern Indian Ocean sister-species apparently maintained a constant size with highly differentiated regional groupings that were asymmetrically connected by gene flow.Past and present surface circulation patterns in conjunction with ocean primary productivity were identified as the processes most likely to have shaped the genetic structure between and within the two Indian Ocean lineages. This knowledge will help to understand the biological or ecological differences of the two sibling species and therefore aid in developing strategies to manage population outbreaks of this coral predator in the Indian Ocean.

Study on Compatibility between Converters and Casting Machines for Daily Steelmaking and Continuous Casting Scheduling

Institute of Scientific and Technical Information of China (English)

MA Feng-cai; ZHANG Qun

2009-01-01

In this paper, daily production scheduling is studied based on the Third Steelmaking Plant of Wuhan Iron and steel corporation (WISCO). To make sure the daily production plan is feasible, method of casting gToup is established, and the compatibility between two converters and three continuous casting devices in the Third Steelmaking Plant of WISCO is analyzed. The process flow chart of daily production scheduling is given in this paper. Then, algorithms and procedures for the simulation of daily production plan is developed. Using the actual data from the Third Steelmaking Plant, the feasible daily steelmaking plan and cast plan are given. The plan contains 7 groups of cast plan, figured out 54 converters, and a- bout 13,500 tons steel.

Ponseti casting: a new soft option.

Science.gov (United States)

Brewster, M B S; Gupta, M; Pattison, G T R; Dunn-van der Ploeg, I D

2008-11-01

We have modified the Ponseti casting technique by using a below-knee Softcast instead of an above-knee plaster of Paris cast. Treatment was initiated as soon as possible after birth and the Pirani score was recorded at each visit. Following the manipulation techniques of Ponseti, a below-knee Softcast was applied directly over a stockinette for a snug fit and particular attention was paid to creating a deep groove above the heel to prevent slippage. If necessary, a percutaneous Achilles tenotomy was performed and casting continued until the child was fitted with Denis Browne abduction boots. Between April 2003 and May 2007 we treated 51 consecutive babies with 80 idiopathic club feet with a mean age at presentation of 4.5 weeks (4 days to 62 weeks). The initial mean Pirani score was 5.5 (3 to 6). It took a mean of 8.5 weeks (4 to 53) of weekly manipulation and casting to reach the stage of percutaneous Achilles tenotomy. A total of 20 feet (25%) did not require a tenotomy and for the 60 that did, the mean Pirani score at time of operation was 2.5 (0.5 to 3). Denis Browne boots were applied at a mean of 10 weeks (4 to 56) after presentation. The mean time from tenotomy to boots was 3.3 weeks (2 to 10). We experienced one case of cast-slippage during a period of non-attendance, which prolonged the casting process. One case of prolonged casting required repeated tenotomy, and three feet required repeated tenotomy and casting after relapsing while in Denis Browne boots. We believe the use of a below-knee Softcast in conjunction with Ponseti manipulation techniques shows promising initial results which are comparable to those using above-knee plaster of Paris casts.

Improved Casting Furnace Conceptual Design

Energy Technology Data Exchange (ETDEWEB)

Fielding, Randall Sidney [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tolman, David Donald [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-02-01

In an attempt to ensure more consistent casting results and remove some schedule variance associated with casting, an improved casting furnace concept has been developed. The improved furnace uses the existing arc melter hardware and glovebox utilities. The furnace concept was designed around physical and operational requirements such as; a charge sized of less than 30 grams, high heating rates and minimal additional footprint. The conceptual model is shown in the report as well as a summary of how the requirements were met.

Prevalence and Determinants of Premature Menopause among Indian Women: Issues and Challenges Ahead.

Science.gov (United States)

Jungari, Suresh Banayya; Chauhan, Bal Govind

2017-05-01

Premature menopause refers to the occurrence of menopause in women less than 40 years of age. This heterogeneous disorder affects 1 percent and 0.1 percent of women less than 40 and 30 years of age, respectively. The study reported in this article attempts to understand the prevalence and determinants of premature menopause among Indian women by studying the effects of various socioeconomic indicators, such as age, education, wealth index, rural-urban settlement, work status, religion, and caste, on women. The study analyzed the National Family Health Survey-3, which is equivalent to the Demographic Health Survey in India. Bivariate and logistic regression analyses were performed to tease out the determinants of premature menopause. Results indicate that the percentage of premature menopause is very high (5.5 percent) among Indian women. Among Indian states, Andhra Pradesh women have the highest percentage of premature menopause (14.6 percent). Smoking and the nutritional status of women are strongly associated with early menopause. Furthermore, women living in rural areas and using tobacco are at a greater risk of premature menopause. © 2017 National Association of Social Workers.

Casting defects and mechanical properties of high pressure die cast Mg-Zn-Al-RE alloys

Energy Technology Data Exchange (ETDEWEB)

Xiao, Wenlong; Easton, Mark A.; Zhu, Suming; Nie, Jianfeng [CAST Cooperative Research Centre, Department of Materials Engineering Monash University, Melbourne, VIC (Australia); Dargusch, Matthew S. [School of Mechanical and Mining Engineering, University of Queensland, Brisbane, QLD (Australia); Gibson, Mark A. [CSIRO Process Science and Engineering, Melbourne, VIC (Australia); Jia, Shusheng [Key Laboratory of Automobile Materials, Ministry of Education, Department of Materials Science and Engineering Jilin University, Changchun (China)

2012-02-15

The die casting defects and tensile properties of high pressure die cast (HPDC) Mg-Zn-Al-RE alloys with various combinations of Zn and Al were studied. The results show that die casting defects in Mg-Zn-Al-RE alloys are affected by the percentage of Zn and Al contents. The hot tearing susceptibility (HTS) of Mg-Zn-Al-RE alloys tends to increase with increasing Zn content up to 6 wt%, while a further increase of Al and/or Zn content reduces the HTS. In tensile tests, the yield strength (YS) is generally improved by increasing Zn or Al content, whereas the tensile strength (TS) and ductility appear to depend largely on the presence of casting defects. Compared with Mg-Zn-Al alloys, the mechanical properties of the Mg-Zn-Al-RE alloy are significantly improved. The Mg-4Zn-4Al-4RE alloy is found to have few casting defects and the optimal tensile properties. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Low Loss Advanced Metallic Fuel Casting Evaluation

International Nuclear Information System (INIS)

Kim, Kihwan; Ko, Youngmo; Kim, Jonghwan; Song, Hoon; Lee Chanbock

2014-01-01

The fabrication process for SFR fuel is composed of fuel slug casting, loading and fabrication of the fuel rods, and the fabrication of the final fuel assemblies. Fuel slug casting is the dominant source of fuel losses and recycles streams in the fabrication process. Recycle streams include fuel slug reworks, returned scraps, and fuel casting heels, which are a special concern in the counter gravity injection casting process because of the large masses involved. Large recycle and waste streams result in lowering the productivity and the economic efficiency of fuel production. To increase efficiency the fuel losses in the furnace chamber, crucible, and the mold, after casting a considerable amount of fuel alloy in the casting furnace, will be quantitatively evaluated. After evaluation the losses will be identified and minimized. It is expected that this study will contribute to the minimization of fuel losses and the wastes streams in the fabrication process of the fuel slugs. Also through this study the technical readiness level of the metallic fuel fabrication process will be further enhanced. In this study, U-Zr alloy system fuel slugs were fabricated by a gravity casting method. Metallic fuel slugs were successfully fabricated with 19 slugs/batch with diameter of 5mm and length of 300mm. Fuel losses was quantitatively evaluated in casting process for the fuel slugs. Fuel losses of the fuel slugs were so low, 0.1∼1.0%. Injection casting experiments have been performed to reduce the fuel loss and improve the casting method. U-Zr fuel slug having φ5.4-L250mm was soundly fabricated with 0.1% in fuel loss. The fuel losses could be minimized to 0.1%, which showed that casting technology of fuel slugs can be a feasible approach to reach the goal of the fuel losses of 0.1% or less in commercial scale

Population structure of Helicobacter pylori among ethnic groups in Malaysia: recent acquisition of the bacterium by the Malay population

Directory of Open Access Journals (Sweden)

Dawes Ian W

2009-06-01

Full Text Available Abstract Background Helicobacter pylori is a major gastric bacterial pathogen. This pathogen has been shown to follow the routes of human migration by their geographical origin and currently the global H. pylori population has been divided into six ancestral populations, three from Africa, two from Asia and one from Europe. Malaysia is made up of three major ethnic populations, Malay, Chinese and Indian, providing a good population for studying recent H. pylori migration and admixture. Results Seventy eight H. pylori isolates, including 27 Chinese, 35 Indian and 16 Malay isolates from Malaysia were analysed by multilocus sequence typing (MLST of seven housekeeping genes and compared with the global MLST data. STRUCTURE analysis assigned the isolates to previously identified H. pylori ancestral populations, hpEastAsia, hpAsia2 and hpEurope, and revealed a new subpopulation, hspIndia, within hpAsia2. Statistical analysis allowed us to identify population segregation sites that divide the H. pylori populations and the subpopulations. The majority of Malay isolates were found to be grouped together with Indian isolates. Conclusion The majority of the Malay and Indian H. pylori isolates share the same origin while the Malaysian Chinese H. pylori is distinctive. The Malay population, known to have a low infection rate of H. pylori, was likely to be initially H. pylori free and gained the pathogen only recently from cross infection from other populations.

Prevalence of cataract surgery and visual outcomes in Indian immigrants in Singapore: the Singapore Indian eye study.

Science.gov (United States)

Gupta, Preeti; Zheng, Yingfeng; Ting, Tay Wan; Lamoureux, Ecosse L; Cheng, Ching-Yu; Wong, Tien-Yin

2013-01-01

To determine the prevalence of cataract surgery and factors associated with post-surgical visual outcomes in migrant Indians living in Singapore. We conducted a population-based study in 3,400 Indian immigrants residing in Singapore-the Singapore Indian Eye Study (SINDI). All participants underwent comprehensive medical eye examination and a standardized interview. Post-operative visual impairment (VI) was defined as best-corrected or presenting visual acuity (BCVA or PVA) of 20/60 or worse. The age- and gender-standardized prevalence of cataract surgery was 9.7% (95% confidence interval [CI]: 8.9%, 10.7%) in Singapore resident Indians. Post-operative VI defined by BCVA occurred in 10.9% eyes (87/795). The main causes of post-operative VI were diabetic retinopathy (20.7%), posterior capsular opacification (18.4%), and age-related macular degeneration (12.6%). Undercorrected refractive error doubled the prevalence of post-operative VI when PVA was used. The rate of cataract surgery is about 10% in Indian residents in Singapore. Socioeconomic variables and migration had no significant impact on the prevalence of cataract surgery. Diabetic retinopathy was a major cause of post-operative VI in migrant Indians living in Singapore. Uncorrected postoperative refractive error remains an efficient way to improve vision.

The effect of cast-to-cast variations on the quality of thin section nickel alloy welded joints

International Nuclear Information System (INIS)

Lambert, J.A.

1989-02-01

The welding behaviour of 26 commercial casts of Alloy 800 has been quantified for mechanised, autogenous, full penetration, bead-on-strip tungsten inert gas welding tests. Weld front and back widths have been measured and correlated with minor element variations. Casts with similar welding responses have been sorted into groups. The behaviour of the weld pool, surface slags and arc have been compared and a convection controlled model has been used to account for differences between the groups of casts. The main factors governing laboratory process control variability have been identified and a statistical method has been used to identify all the components of weld variance. An optimum size of welding test matrix has been proposed to determine typical cast-to-cast variations at high significance levels. (author)

Influence of microscopic casting defects on fatigue endurance of ductile cast iron

Directory of Open Access Journals (Sweden)

Nový František

2018-01-01

Full Text Available In this work, there are published results about fatigue endurance of ductile cast iron obtained at high-frequency sinusoidal cyclic push-pull loading in the ultra-high cycle fatigue region. The main attention was focused on the fatigue lifetime data scatter caused by the influence of microscopic casting defects (microshrinkages, microbubbles, microcracks, non-metallic inclusions and local clusters of big graphitic nodules.

Caste in Itself, Caste and Class, or Caste in Class

OpenAIRE

Ramkrishna Mukherjee

2015-01-01

After the British conquered Bengal and eventually the whole of India,they set out to administer the colony. In this context they encountered two phenomena with which they were not familiar: (1) the relation of people to land for production (and not for revenue receiving, household living, etc.), and (2) the caste system of India, viz. the jati strati?cation of society.

Development and standardization of Indian aphasia battery

Directory of Open Access Journals (Sweden)

Harsimarpreet Kaur

2017-01-01

Full Text Available Background: Aphasia is a language disorder which may disrupt an individual's functioning. To plan a mode of therapeutic/rehabilitative work, it is important to assess problems from a neuropsychological perspective focused on remediation of the impaired processes or compensation through the intact processes or both. Aim: Due to the paucity of tests available for the assessment of aphasia in the Indian population with specific colloquial expression, the aim of the present study was to develop an aphasia test for Hindi-speaking population and to provide evidence with its reliability and validity. Methods: The conception of the test took place in two phases: Phase 1 was the development of Indian Aphasia Battery (IAB and Phase 2 was its standardization. IAB was administered along the Hindi adaptation of the Western Aphasia Battery (WAB-H on participants with aphasia, probable aphasia, and healthy volunteers. Outcomes and Results: Based on the results of this study, IAB has a high concurrent validity and test–retest reliability in comparison to WAB-H. The subtests are sensitive enough to contribute to global aphasia quotient as a functional measure of aphasia in Indian brain-damaged patients. Conclusion: IAB is a quick and easy to administer measure for assessment of aphasia in Hindi-speaking population with high reliability and validity.

"Starting Stories" among Older Northern Plains American Indian Smokers

Science.gov (United States)

Hodge, Christopher E.

2009-01-01

American Indian adults have the highest smoking rate of any racial group in the nation. By the turn of the 21st century, smoking rates for the general adult population were reported to be 24%. Among adolescents in the United States, 34.8% of high school students reported they currently smoked in 1999. In comparison, American Indian adults report…

Effect of parameters of high-pressure die casting on occurrence of casting nonconformities in sleeves of silumin alloy EN AB 47100

Directory of Open Access Journals (Sweden)

Pałyga Ł.

2017-03-01

Full Text Available The paper presents a research on the effect of extreme - for the technology of the considered silumin EN AB 47100 - parameters of high-pressure die casting on occurrence of casting nonconformities. Considered was influence of the way of assembling the mould cooled-down to 140-160°C, non-standard for the selected casting, and pouring temperature in the range of 705 to 720°C (higher than the recommended of non-refined alloy. The castings were prepared with use of a high-pressure casting machine made by Kirov with mould closing force of 2500 kN. Occurrence of nonconformities was evaluated on properly prepared specimens taken from the castings manufactured with various parameters of the injection piston and various multiplication pressures. The results were subjected to quantitative and qualitative analyses of casting nonconformities and distribution of major alloying elements. It was found that proper selection of working parameters of the casting machine, in spite of disadvantageous pouring conditions, makes it possible to reduce occurrence of some casting defects, like shrinkage cavities and porosity, to improve tightness of castings even when the alloy refining process is omitted.

Developing technological process of obtaining giality casts

Directory of Open Access Journals (Sweden)

A. Issagulov

2014-10-01

Full Text Available The article considers the process of manufacturing castings using sand-resin forms and alloying furnace. Were the optimal technological parameters of manufacturing shell molds for the manufacture of castings of heating equipment. Using the same upon receipt of castings by casting in shell molds furnace alloying and deoxidation of the metal will provide consumers with quality products and have a positive impact on the economy in general engineering.

Simulation of the injection casting of metallic fuels

International Nuclear Information System (INIS)

Nakagawa, Tomokazu; Ogata, Takanari; Tokiwai, Moriyasu.

1989-01-01

For the fabrication of metallic fuel pins, injection casting is a preferable process because the simplicity of the process is suitable for remote operation. In this process, the molten metal in the crucible is injected into evacuated molds (suspended above the crucible) by pressurizing the casting furnace. Argonne National Laboratory has already adopted this process in the Integral Fast Reactor program. To obtain fuel pins with good quality, the casting parameters, such as the molten metal temperature, the magnitude of the pressure applied, the pressurizing rate, the cooling time, etc., must be optimized. Otherwise, bad-quality castings (short castings, rough surfaces, shrinkage cavities, mold fracture) may result. Therefore, it is very important in designing the casting equipment and optimizing the operation conditions to be able to predict the fluid and thermal behavior of the castings. This paper describes methods to simulate the heat and mass transfer in the molds and molten metallic fuel during injection casting. The results obtained by simulation are compared with experimental ones. Also, appropriate casting conditions for the uranium-plutonium-zirconium alloy are discussed based on the simulated results

Genetic Evidence for Recent Population Mixture in India

OpenAIRE

Moorjani, Priya; Thangaraj, Kumarasamy; Patterson, Nick; Lipson, Mark; Loh, Po-Ru; Govindaraj, Periyasamy; Berger, Bonnie; Reich, David; Singh, Lalji

2013-01-01

Most Indian groups descend from a mixture of two genetically divergent populations: Ancestral North Indians (ANI) related to Central Asians, Middle Easterners, Caucasians, and Europeans; and Ancestral South Indians (ASI) not closely related to groups outside the subcontinent. The date of mixture is unknown but has implications for understanding Indian history. We report genome-wide data from 73 groups from the Indian subcontinent and analyze linkage disequilibrium to estimate ANI-ASI mixture ...

Development of vacuum continuous casting technology for uranium

International Nuclear Information System (INIS)

Lee, Y.S.; Kim, C. K.; Kim, K. H.; Lee, D. B.; Kim, J. D.; Jang, S. J.; Ahn, H. S.; Shin, Y. J.

2001-02-01

The spent fuel disposal process of new dry storage concept has been developed in KAERI, in which the uranium metal abstracted by Li-reduction of spent fuel will be formed to long rods and then the rods will be arranged uniformly in canister. The objective of this study is to review the feasibility of applying the continuous casting method to cast a long rod with modifying the vacuum high-frequency induction furnace to vacuum continuous casting system, which was normally used to cast the uranium. The results are as follows. With the nozzle size of 3mm and the withdrawal speed of 3.5 mm/sec, the length of 160mm, diameter of 30 mm continuous casting uranium bar was successfully cast. This result shows there might be a possibility of continuous casting of uranium and helps the design and fabrication of new continuous casting equipment

The effects of casting speed on steel continuous casting process

Energy Technology Data Exchange (ETDEWEB)

Sadat, Mohammad; Honarvar Gheysari, Ali; Sadat, Saeid [Islamic Azad University, Department of Mechanics, Mashhad Branch, Mashhad (Iran, Islamic Republic of)

2011-12-15

A three dimensional simulation of molten steel flow, heat transfer and solidification in mold and ''secondary cooling zone'' of Continuous Casting machine was performed with consideration of standard k-{epsilon} model. For this purpose, computational fluid dynamics software, FLUENT was utilized. From the simulation standpoint, the main distinction between this work and preceding ones is that, the phase change process (solidification) and flow (turbulent in mold section and laminar in secondary cooling zone) have been coupled and solved jointly instead of dividing it into ''transient heat conduction'' and ''steady fluid flow'' that can lead to more realistic simulation. Determining the appropriate boundary conditions in secondary cooling zone is very complicated because of various forms of heat transfer involved, including natural and forced convection and simultaneous radiation heat transfer. The main objective of this work is to have better understanding of heat transfer and solidification in the continuous casting process. Also, effects of casting speed on heat flux and shell thickness and role of radiation in total heat transfer is discussed. (orig.)

Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method

International Nuclear Information System (INIS)

Senthil, P.; Amirthagadeswaran, K. S.

2012-01-01

This paper reports a research in which an attempt was made to prepare AC2A aluminium alloy castings of a non symmetrical component through squeeze casting process. The primary objective was to investigate the influence of process parameters on mechanical properties of the castings. Experiments were conducted based on orthogonal array suggested in Taguchi's offline quality control concept. The experimental results showed that squeeze pressure, die preheating temperature and compression holding time were the parameters making significant improvement in mechanical properties. The optimal squeeze casting condition was found and mathematical models were also developed for the process

Tape casting fluorinated YBC123

International Nuclear Information System (INIS)

Taylor, J.A.T.; Luke, D.M.; Whiteley, B.A.

1991-01-01

Tape casting the superconducting Ba-Y-Cu oxide was accomplished by several laboratories and show promise for being a versatile forming technique. The major problem is low current density, probably due to lack of grain alignment and grain boundary related weak links. The latter problem may be due to formation of carbonates and hydroxides during binder burnout. Preliminary work done at Alfred shows that a bimodal powder size distribution displays significant alignment after tape casting and that F treated powder is resistant to attack by steam at 100C. Such corrosion resistant powder cast as form tape should survive the binder burnout without the detrimental grain boundary phases that develop from reaction of the superconducting phase, steam and carbon dioxide. This paper presents the results of an investigation of tape casting fluorinated powder with a bimodal size distribution

Seal welded cast iron nuclear waste container

International Nuclear Information System (INIS)

Filippi, A.M.; Sprecace, R.P.

1987-01-01

An article of manufacture is described comprising a cast iron container having an opening at one end and a cast iron plug; a first nickel-carbon alloy fusion weldable insert surrounding the opening and metallurgically bonded to the cast iron container at the one end of the container; a second nickel-carbon alloy insert metallurgically bonded to the cast iron plug located within the opening and surrounded by the first insert the inserts being jointed by a fusion bond in the opening without heating the cast iron container to an austenite formation temperature thereby sealing the interior of the container from the exterior ambient outside the opening; the nickel-carbon alloy containing about 2 to 5 w% carbon; and both the nickel-carbon alloy insert and the cast iron container have a microstructure containing a graphite phase

Centrifugal Casting Features/Metallurgical Characterization of Aluminum Alloys

International Nuclear Information System (INIS)

Chirita, G.; Soares, D.; Cruz, D.; Silva, F. S.; Stefanescu, I.

2008-01-01

This paper deals with the study of centrifugal effects on aluminium castings under high G values. Most of the studies in this domain (FGMs obtained by centrifugal casting) deal with functionally graded composites reinforced with a solid phase such as silicon particles or others. However, in this study it will be shown that unreinforced aluminium alloys may be significantly influenced by the centrifugal effect and that functionally graded castings are also obtained. It has been observed that the centrifugal effect may increase in some alloys, depending on the relative position in the castings, the rupture strength by approx. 50%, and rupture strain by about 300%, as compared to the gravity casting technique. The Young's modulus may also increase by about 20%. It has also been reported that in vertical centrifugal castings there are mainly three aspects that affect the components thus obtained, namely: fluid dynamics; vibration (inherent to the system); and centrifugal force. These features have a different effect on the castings depending on the aluminium alloy. In this paper, an analysis of the most important effects of the centrifugal casting process on metallurgical features is conducted. A solidification characterization at several points along the mould will be made in order to have an accurate idea of both the fluid dynamics inside the mould during the casting and the solidification behavior in different parts of the component. These two analyses will be related to the metallurgical properties (phase distribution; SDAS; eutectic silicon content and shape, pores density and shape) along the component and mainly along the direction of the centrifugal pressure. A comparison between castings obtained by both centrifugal casting technique and gravity casting technique is made for reference (gravity casting)

Journal of Genetics | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Journal of Genetics; Volume 87; Issue 2. Genetic study of scheduled caste populations of Tamil Nadu. M. Vijaya S. Kanthimathi A. Ramesh. Research Note Volume 87 Issue 2 August 2008 pp 171-174. Fulltext. Click here to view fulltext PDF. Permanent link:

Novel technologies for the lost foam casting process

Science.gov (United States)

Jiang, Wenming; Fan, Zitian

2018-03-01

Lost foam casting (LFC) is a green precision casting process categorized as a near net forming technology. Yet, despite its popularity, it still suffers from some technological problems, such as poor filling ability of the castings, coarse and non-dense microstructure, low mechanical properties for the Al and Mg LFC processes, and defective carburization for the low carbon steel LFC process. These drawbacks restrict the development and widespread application of the LFC process. To solve these problems, the present study developed several novel LFC technologies, namely, LFC technologies under vacuum and low pressure, vibration solidification, and pressure solidification conditions; expendable shell casting technology; and preparation technology of bimetallic castings based on the LFC process. The results showed that the LFC under vacuum and low pressure evidently improved the filling ability and solved the oxidization problem of the alloys, which is suitable for producing complex and thinwall castings. The vibration and pressure solidifications increased the compactness of the castings and refined the microstructure, significantly improving the mechanical properties of the castings. The expendable shell casting technology could solve the pore, carburization, and inclusion defects of the traditional LFC method, obtaining castings with acceptable surface quality. Moreover, the Al/Mg and Al/Al bimetallic castings with acceptable metallurgical bonding were successfully fabricated using the LFC process. These proposed novel LFC technologies can solve the current technological issues and promote the technological progress of the LFC process.

Cardiovascular cast model fabrication and casting effectiveness evaluation in fetus with severe congenital heart disease or normal heart.

Science.gov (United States)

Wang, Yu; Cao, Hai-yan; Xie, Ming-xing; He, Lin; Han, Wei; Hong, Liu; Peng, Yuan; Hu, Yun-fei; Song, Ben-cai; Wang, Jing; Wang, Bin; Deng, Cheng

2016-04-01

To investigate the application and effectiveness of vascular corrosion technique in preparing fetal cardiovascular cast models, 10 normal fetal heart specimens with other congenital disease (control group) and 18 specimens with severe congenital heart disease (case group) from induced abortions were enrolled in this study from March 2013 to June 2015 in our hospital. Cast models were prepared by injecting casting material into vascular lumen to demonstrate real geometries of fetal cardiovascular system. Casting effectiveness was analyzed in terms of local anatomic structures and different anatomical levels (including overall level, atrioventricular and great vascular system, left-sided and right-sided heart), as well as different trimesters of pregnancy. In our study, all specimens were successfully casted. Casting effectiveness analysis of local anatomic structures showed a mean score from 1.90±1.45 to 3.60±0.52, without significant differences between case and control groups in most local anatomic structures except left ventricle, which had a higher score in control group (P=0.027). Inter-group comparison of casting effectiveness in different anatomical levels showed no significant differences between the two groups. Intra-group comparison also revealed undifferentiated casting effectiveness between atrioventricular and great vascular system, or left-sided and right-sided heart in corresponding group. Third-trimester group had a significantly higher perfusion score in great vascular system than second-trimester group (P=0.046), while the other anatomical levels displayed no such difference. Vascular corrosion technique can be successfully used in fabrication of fetal cardiovascular cast model. It is also a reliable method to demonstrate three-dimensional anatomy of severe congenital heart disease and normal heart in fetus.

Caste in Itself, Caste and Class, or Caste in Class

Directory of Open Access Journals (Sweden)

Ramkrishna Mukherjee

2015-08-01

Full Text Available After the British conquered Bengal and eventually the whole of India,they set out to administer the colony. In this context they encountered two phenomena with which they were not familiar: (1 the relation of people to land for production (and not for revenue receiving, household living, etc., and (2 the caste system of India, viz. the jati strati?cation of society.

Solidification of cast iron - A study on the effect of microalloy elements on cast iron

DEFF Research Database (Denmark)

Moumeni, Elham

The present thesis deals with the heat transfer and solidification of ductile and microalloyed grey cast iron. Heterogeneous nucleation of nodular graphite at inclusions in ductile iron during eutectic solidification has been investigated. A series of ductile iron samples with two different...... of the austenite, in the last region to solidify. The superfine graphite which forms in this type of irons is short (10-20µm) and stubby. The microstructure of this kind of graphite flakes in titanium alloyed cast iron is studied using electron microscopy techniques. The methods to prepare samples of cast iron...... for comprehensive transmission electron microscopy of graphite and the surrounding iron matrix have been developed and explained. Dual beam microscopes are used for sample preparation. A TEM study has been carried out on graphite flakes in grey cast iron using selected area electron diffraction (SAED). Based...

Reliability and validity analysis of modified Nursing Stress Scale for Indian population.

Science.gov (United States)

Pathak, Vasundhara; Chakraborty, Tania; Mukhopadhyay, Suman

2013-01-01

The original Nursing Stress Scale (NSS) was structurally modified according to results of factorial analysis and a new scale was named as modified nursing stress scale (MNSS). This is the first study to modify and validate NSS for Indian nursing population. Factorial analysis showed different factor loading for two subscales and items were shifted according to their loading to provide a more meaningful structure. After relocation of Items 13, 14, and 15 into first factor, this factor was renamed as "emotional and painful conditions of patients" to provide a more appropriate name to the first factor. Items 24, 25, 26, 27, 28, and 29 were found to be distributed under two different factors; one of these two was renamed as "unpredictable changes" and another retained its original name (i.e., workload). This distribution was also supported by rational analysis. All other items were distributed under factors as in the original scale. Rest of the validity assessment was done with the modified scale. Thus, with minor changes in structure, the scale was found to have better content validity.

Analysis of prostaglandin-endoperoxide synthase-2 gene polymorphisms and risk of cervical cancer in an East Indian population: A case–control study

Directory of Open Access Journals (Sweden)

Dipanshu Sur

2017-01-01

Conclusions: PTGS-2 genotype rs689466:—1195A/G gene polymorphism demonstrated strongly associated with cervical cancer disease. However, exon1-+837T > C polymorphism was not associated with cancer risk in East Indian women. Further studies evaluating the role of PTGS-2 gene polymorphisms in ethnically diverse populations and a larger cohort may help in understanding the etiopathogenesis of cervical cancer in women worldwide.

Genealogy construction in a historically isolated population: application to genetic studies of rheumatoid arthritis in the Pima Indian.

Science.gov (United States)

Lin, J P; Hirsch, R; Jacobsson, L T; Scott, W W; Ma, L D; Pillemer, S R; Knowler, W C; Kastner, D L; Bale, S J

1999-01-01

Due to the characteristics of complex traits, many traits may not be amenable to traditional epidemiologic methods. We illustrate an approach that defines an isolated population as the "unit" for carrying out studies of complex disease. We provide an example using the Pima Indians, a relatively isolated population, in which the incidence and prevalence of Type 2 diabetes, gallbladder disease, and rheumatoid arthritis (RA) are significantly increased compared with the general U.S. population. A previous study of RA in the Pima utilizing traditional methods failed to detect a genetic effect on the occurrence of the disease. Our approach involved constructing a genealogy for this population and using a genealogic index to investigate familial aggregation. We developed an algorithm to identify biological relationships among 88 RA cases versus 4,000 subsamples of age-matched individuals from the same population. Kinship coefficients were calculated for all possible pairs of RA cases, and similarly for the subsamples. The sum of the kinship coefficient among all combination of RA pairs, 5.92, was significantly higher than the average of the 4,000 subsamples, 1.99 (p genealogy can be anticipated to provide valuable information for the genetic study of diseases other than RA. Defining an isolated population as the "unit" in which to assess familial aggregation may be advantageous, especially if there are a limited number of cases in the study population.

The role of water in slip casting

Science.gov (United States)

Mccauley, R. A.; Phelps, G. W.

1984-01-01

Slips and casting are considered in terms of physical and colloidal chemistry. Casting slips are polydisperse suspensions of lyophobic particles in water, whose degree of coagulation is controlled by interaction of flocculating and deflocculating agents. Slip casting rate and viscosity are functions of temperature. Slip rheology and response to deflocculating agents varies significantly as the kinds and amounts of colloid modifiers change. Water is considered as a raw material. Various concepts of water/clay interactions and structures are discussed. Casting is a de-watering operation in which water moves from slip to cast to mold in response to a potential energy termed moisture stress. Drying is an evaporative process from a free water surface.

The CAST Time Projection Chamber

CERN Document Server

Autiero, D.; Carmona, J.M.; Cebrian, S.; Chesi, E.; Davenport, M.; Delattre, M.; Di Lella, L.; Formenti, F.; Irastorza, I.G.; Gomez, H.; Hasinoff, M.; Lakic, B.; Luzon, G.; Morales, J.; Musa, L.; Ortiz, A.; Placci, A.; Rodriguez, A.; Ruz, J.; Villar, J.A.; Zioutas, K.

2007-01-01

One of the three X-ray detectors of the CAST experiment searching for solar axions is a Time Projection Chamber (TPC) with a multi-wire proportional counter (MWPC) as a readout structure. Its design has been optimized to provide high sensitivity to the detection of the low intensity X-ray signal expected in the CAST experiment. A low hardware threshold of 0.8 keV is safely set during normal data taking periods, and the overall efficiency for the detection of photons coming from conversion of solar axions is 62 %. Shielding has been installed around the detector, lowering the background level to 4.10 x 10^-5 counts/cm^2/s/keV between 1 and 10 keV. During phase I of the CAST experiment the TPC has provided robust and stable operation, thus contributing with a competitive result to the overall CAST limit on axion-photon coupling and mass.

Microsatellite and HLA class II oligonucleotide typing in a population of Yanomami Indians.

Science.gov (United States)

Roewer, L; Nagy, M; Schmidt, P; Epplen, J T; Herzog-Schröder, G

1993-01-01

We have used three different microsatellites (on chromosome 12 and Y) together with HLA class II oligonucleotide typing (DQA and DQB) to analyze families of Yanomami indians settling in villages in Southern Venezuela. There exist complex networks of biological relationship between villages as a result of wife exchange, village fissioning and changing patterns of alliances associated with inter-village warfare. Social status in this society is largely determined by the kinship system. Polygyny is common, especially among headmen, with additional wives, frequently being chosen among the sisters of the first wife. Our preliminary results mainly obtained from inhabitants of the village HAP show the expected allele distribution in populations with a high degree of consanguinity: (i) deficiency of observed heterozygotes at the autosomal loci and (ii) almost all men carry the same Y chromosomal allele. Nevertheless in the Yanomami village two thirds of the described autosomal microsatellite alleles were identified. Several paternities were clarified.

Honoring the Ways of American Indian Women: A Group Therapy Intervention

Science.gov (United States)

McWhirter, Paula T.; Robbins, Rockey; Vaughn, Karen; Youngbull, Natalie; Burks, Derek; Willmon-Haque, Sadie; Schuetz, Suzan; Brandes, Joyce A.; Nael, Andrea Zainab Omidy

2010-01-01

A culturally grounded group intervention for a typically underserved population of urban American Indian women is described. The intervention is designed to increase interpersonal connection, improve inter-tribal acceptance and trust, and enhance psychological well being of marginalized urban American Indian women. Topics used to structure the…

Improvement of Artistic Cast Production System

Directory of Open Access Journals (Sweden)

Władysiak R.

2017-09-01

Full Text Available The paper presents the technology and organization of the artistic cast production. On the basis of the actual cast production system, the manufacturing process was shown, in particular sand–piece moulding, which is a very important process and a time-consuming part of the entire manufacture of the casts. The current state of the production process as well as the organization of the work and production technology were analysed with the use of methods and techniques of production improvement, the Lean Manufacturing concept and computer systems. The results of the analysis and studies were shown with use of schemes and graphs of the layout of the production resources, a flow chart of the production process, value stream mapping, and a costs table for the production and modernization of the moulding stage. The work has shown that there are possibilities to improve the artistic cast production system. This improvement leads to increased productivity, lower production costs of artistic casts and increased competitiveness of the foundry.

The X-ray Telescope of CAST

CERN Document Server

Kuster, M.; Cebrian, S.; Davenport, M.; Elefteriadis, C.; Englhauser, J.; Fischer, H.; Franz, J.; Friedrich, P.; Hartmann, R.; Heinsius, F.H.; Hoffmann, D.H.H.; Hoffmeister, G.; Joux, J.N.; Kang, D.; Konigsmann, Kay; Kotthaus, R.; Papaevangelou, T.; Lasseur, C.; Lippitsch, A.; Lutz, G.; Morales, J.; Rodriguez, A.; Struder, L.; Vogel, J.; Zioutas, K.

2007-01-01

The Cern Axion Solar Telescope (CAST) is in operation and taking data since 2003. The main objective of the CAST experiment is to search for a hypothetical pseudoscalar boson, the axion, which might be produced in the core of the sun. The basic physics process CAST is based on is the time inverted Primakoff effect, by which an axion can be converted into a detectable photon in an external electromagnetic field. The resulting X-ray photons are expected to be thermally distributed between 1 and 7 keV. The most sensitive detector system of CAST is a pn-CCD detector combined with a Wolter I type X-ray mirror system. With the X-ray telescope of CAST a background reduction of more than 2 orders off magnitude is achieved, such that for the first time the axion photon coupling constant g_agg can be probed beyond the best astrophysical constraints g_agg < 1 x 10^-10 GeV^-1.

CASTing light on dark matter particles

CERN Multimedia

2005-01-01

CERN's CAST collaboration recently released first results from its search for solar axions, a candidate dark matter particle. Though they haven't found any axions yet, they have done much to narrow the hunt. The CAST experiment. Physicists think the universe is permeated with dark matter, particles that don't emit or absorb radiation and so are invisible to traditional telescopes. So far no one has found direct signs of dark matter. A different breed of telescope, however, may be able to see such particles. CERN's Axion Solar Telescope (CAST), currently the world's only working axion helioscope, is a superconducting test magnet from the Large Hadron Collider (LHC) that has been refurbished and outfitted with X-ray detectors, plus a focusing mirror system for X-rays that was recovered from the German space program. CAST stares into the sun in search of particles called axions, one of the leading candidates for dark matter. On 9 November, the CAST collaboration released the results of their first experimen...

A clinical study to evaluate the correlation between maxillary central incisor tooth form and face form in an Indian population.

Science.gov (United States)

Koralakunte, Pavankumar R; Budihal, Dhanyakumar H

2012-09-01

A study was performed to examine the correlation between maxillary central incisor tooth form and face form in males and females in an Indian population. The selection of prosthetic teeth for edentulous patients is a primary issue in denture esthetics, especially in the case of maxillary central incisors, which are the most prominent teeth in the arch. Two hundred dental students of Indian origin comprising 79 males and 121 females aged 18-28 years studying at Bapuji Dental College and Hospital were randomly selected as the study subjects. A standardized photographic procedure was used to obtain images of the face and the maxillary central incisors. The outline forms of the face and the maxillary right central incisor tooth were determined using a standardized method. The outline forms obtained were used to classify both face form and tooth form on the basis of visual and William's methods. The means were considered after evaluation by five prosthodontists, and the results were tabulated. Statistical analysis was performed using the chi-squared test for association and Z-test for equality of proportions. A correlation greater than 50% was observed between tooth form and face form by the visual method, compared with one of 31.5% by William's method. There was no highly defined correlation between maxillary central incisor tooth form and face form among the male and female Indian subjects studied.

Kinematic Gait Changes Following Serial Casting and Bracing to Treat Toe Walking in a Child With Autism.

Science.gov (United States)

Barkocy, Marybeth; Dexter, James; Petranovich, Colleen

2017-07-01

To evaluate the effectiveness of serial casting in a child with autism spectrum disorder (ASD) exhibiting a toe-walking gait pattern with equinus contractures. Although many children with ASD toe walk, little research on physical therapy interventions exists for this population. Serial casting has been validated for use in idiopathic toe walking to increase passive dorsiflexion and improve gait, but not for toe walking in children with ASD. Serial casting followed by ankle-foot orthosis use was implemented to treat a child with ASD who had an obligatory equinus gait pattern. Gait analysis supported improvements in kinematic, spatial, and temporal parameters of gait, and the child maintained a consistent heel-toe gait at 2-year follow-up. STATEMENT OF CONCLUSION AND RECOMMENDATIONS FOR CLINICAL PRACTICE:: Serial casting followed by ankle-foot orthosis use is a viable treatment option for toe walking in children with ASD.

New progresses of Chinese art casting

Directory of Open Access Journals (Sweden)

Tan Derui

2007-05-01

Full Text Available The Chinese art casting with 5 000 years history has been rapidly developed in recent ten years. This benefits from the great development of Chinese economy, the large-scale urban construction and transformation, the increasing demands for the cultural work of art, the loose religious environment and the expanding international market. The Art Casting Technical Committee of China Foundry Association has been established for 10 years. Almost 90 art casting enterprises joined in the organization, not including nearly thousand enterprises of foreign capital and massive domestic workshop type. It is estimated that the scale and the output of art castings in mainland China have situated the world front row.