WorldWideScience

Sample records for included papers mow

  1. Deconstructing The Current Construction Of Mow: 'Meaning Of Work ...

    African Journals Online (AJOL)

    ‟. It is argued that MOW could be ... This paper calls for debate on the ontological (the nature) and teleological (the purpose) base of the concept „work‟, its meaning in society and application in work psychology. Such debate would inform the ...

  2. Microwave sensors for detection of wild animals during pasture mowing

    Directory of Open Access Journals (Sweden)

    A. Patrovsky

    2005-01-01

    Full Text Available More than 400000 wild animals are killed or severely injured every year during spring time pasture mowing. Conventional methods for detection and removal or expulsion of animals before mowing are either inefficient or very time-consuming. The first really working method is based on a pyro-detector which senses the temperature contrast between the animals body and the surrounding pasture. Unfortunately, the detection reliability of this sensor decreases with increasing ambient temperature and strong sunlight, i.e. for typical weather conditions, when pasture is mowed, especially around noon. In this paper, a detector is presented that exhibits complementary behaviour. It works best during dry conditions (i.e. around noon, but has a tendency to false alarms when dew is present (i.e. morning and evening. The sensor is based on a commercial, low-cost Doppler module at 24GHz. It senses the difference of radar cross section between the animals body (high water content, specular reflection and the pasture (low water content, diffuse reflection. The signal is analysed by means of a non-linear Wigner time-frequency transformation. Experimental results are presented for a laboratory setup as well as for measurement in actual spring-time pasture. The results prove that a microwave sensor is capable of reliably detecting animals of the size of a fawn even if it is covered by a layer of pasture.

  3. To mow or to mow less: Lawn mowing frequency affects bee abundance and diversity in suburban yards

    Science.gov (United States)

    Susannah B. Lerman; Alexandra R. Contosta; Joan Milam; Christofer Bang

    2018-01-01

    Green spaces embedded within the urban matrix, particularly residential yards, could mitigate negative aspects of urban development and provide pollinator habitat. Lawns represent a dominant green space, and their management consists of frequent mowing to inhibit the growth of ostensibly “weedy” species (e.g., dandelions and clover). Since widespread population...

  4. Does delaying the first mowing date benefit biodiversity in meadowland?

    Directory of Open Access Journals (Sweden)

    Humbert Jean-Yves

    2012-07-01

    Full Text Available Abstract Background Meadows are regularly mown in order to provide fodder or litter for livestock and to prevent vegetation succession. However, the time of year at which meadows should be first mown in order to maximize biological diversity remains controversial and may vary with respect to context and focal taxa. We carried out a systematic review and meta-analysis on the effects of delaying the first mowing date upon plants and invertebrates in European meadowlands. Methods Following a CEE protocol, ISI Web of Science, Science Direct, JSTOR, Google and Google Scholar were searched. We recorded all studies that compared the species richness of plants, or the species richness or abundance of invertebrates, between grassland plots mown at a postponed date (treatment vs plots mown earlier (control. In order to be included in the meta-analysis, compared plots had to be similar in all management respects, except the date of the first cut that was (mostly experimentally manipulated. They were also to be located in the same meadow type. Meta-analyses applying Hedges’d statistic were performed. Results Plant species richness responded differently to the date to which mowing was postponed. Delaying mowing from spring to summer had a positive effect, while delaying either from spring to fall, or from early summer to later in the season had a negative effect. Invertebrates were expected to show a strong response to delayed mowing due to their dependence on sward structure, but only species richness showed a clearly significant positive response. Invertebrate abundance was positively influenced in only a few studies. Conclusions The present meta-analysis shows that in general delaying the first mowing date in European meadowlands has either positive or neutral effects on plant and invertebrate biodiversity (except for plant species richness when delaying from spring to fall or from early summer to later. Overall, there was also strong between

  5. 76 FR 2145 - International Paper Company, Franklin Pulp & Paper Mill, Including On-Site Leased Workers From...

    Science.gov (United States)

    2011-01-12

    ... Company, Franklin Pulp & Paper Mill, Including On-Site Leased Workers From Railserve, Franklin, VA..., applicable to workers and former workers of International Paper Company, Franklin Pulp & Paper Mill, Franklin... follows: All workers International Paper Company, Franklin Pulp & Paper Mill, including on-site leased...

  6. 78 FR 21151 - Boise White Paper, LLC, A Subsidiary of Boise Paper Holdings, LLC, Including On-Site Leased...

    Science.gov (United States)

    2013-04-09

    ... Paper, LLC, A Subsidiary of Boise Paper Holdings, LLC, Including On-Site Leased Workers From Guardsmark.... Helens, OR; Boise White Paper, LLC, A Subsidiary of Boise Paper Holdings, LLC, Vancouver, WA; Amended... workers and former workers of Boise White Paper, LLC, a subsidiary of Boise Paper Holdings, LLC, St...

  7. 75 FR 26794 - International Paper Company Franklin Pulp & Paper Mill Including On-Site Leased Workers From...

    Science.gov (United States)

    2010-05-12

    ... Company Franklin Pulp & Paper Mill Including On-Site Leased Workers From Railserve, Franklin, VA; Amended... workers of International Paper Company, Franklin Pulp & Paper Mill, Franklin, Virginia. The notice was... Pulp & Paper Mill. The Department has determined that these workers were sufficiently under the control...

  8. 29 CFR 780.206 - Planting and lawn mowing.

    Science.gov (United States)

    2010-07-01

    ... plant fruit trees and berry stock not raised by their employer would be considered as engaged in... mowing. (a) The planting of trees and bushes is within the scope of agriculture where it constitutes a... of such trees or bushes). Thus, employees of the nurseryman who raised such nursery stock are doing...

  9. Effect of mowing and grazing on ramet emergence of Leymus ...

    African Journals Online (AJOL)

    user

    2011-03-21

    Mar 21, 2011 ... experiment was conducted in the spring of 2004 to investigate the effects on the surface soil temperature caused by mowing, grazing and grazing exclusion, and the influence of these factors on the ramets emergence characteristics. The primary effect of the treatments was significant changes in.

  10. Does delaying the first mowing date benefit biodiversity in meadowland?

    OpenAIRE

    Humbert J.Y. J. Pellet P. Buri & R. Arlettaz

    2012-01-01

    Background: Meadows are regularly mown in order to provide fodder or litter for livestock and to prevent vegetation succession. However the time of year at which meadows should be first mown in order to maximize biological diversity remains controversial and may vary with respect to context and focal taxa. We carried out a systematic review and meta analysis on the effects of delaying the first mowing date upon plants and invertebrates in European meadowlands. Methods: Following a CEE protoco...

  11. Determination of thermodynamical coefficients for Mo-W alloys according to short-range order parameters

    International Nuclear Information System (INIS)

    Erokhin, L.N.; Mokrov, A.P.; Shivrin, O.N.; Khanina, N.I.

    1986-01-01

    A method is proposed for determining thermodynamical coefficients according to short-range order parameters. The method approbation for Mo-W alloys has shown a good agreement between the thermodynamical and diffusion data. The Mo-W system in the concentration range under study is close to the ideal one. The calculated relative error of determination of interdiffusion coefficients in alloys of the Mo-W system does not exceed 16%

  12. Effect of different mowing regimes on butterflies and diurnal moths on road verges

    Directory of Open Access Journals (Sweden)

    Valtonen, A.

    2006-12-01

    Full Text Available In northern and central Europe road verges offer alternative habitats for declining plant and invertebrate species of semi-natural grasslands. The quality of road verges as habitats depends on several factors, of which the mowing regime is one of the easiest to modify. In this study we compared the Lepidoptera communities on road verges that underwent three different mowing regimes regarding the timing and intensity of mowing; mowing in mid-summer, mowing in late summer, and partial mowing (a narrow strip next to the road. A total of 12,174 individuals and 107 species of Lepidoptera were recorded. The mid-summer mown verges had lower species richness and abundance of butterflies and lower species richness and diversity of diurnal moths compared to the late summer and partially mown verges. By delaying the annual mowing until late summer or promoting mosaic-like mowing regimes, such as partial mowing, the quality of road verges as habitats for butterflies and diurnal moths can be improved.

  13. Characterization of aerosol particles from grass mowing by joint deployment of ToF-AMS and ATOFMS instruments

    Science.gov (United States)

    Drewnick, Frank; Dall'Osto, Manuel; Harrison, Roy

    During a measurement campaign at a semi-urban/industrial site a grass-cutting event was observed, when the lawn in the immediate surrounding of the measurement site was mowed. Using a wide variety of state-of-the-art aerosol measurement technology allowed a broad characterization of the aerosol generated by the lawn mowing. The instrumentation included two on-line aerosol mass spectrometers: an Aerodyne Time-of-Flight Aerosol Mass Spectrometer (ToF-AMS) and a TSI Aerosol Time-of-Flight Mass Spectrometer (ATOFMS); in addition, a selection of on-line aerosol concentration and size distribution instruments (OPC, APS, SMPS, CPC, FDMS-TEOM, MAAP) was deployed. From comparison of background aerosol measurements during most of the day with the aerosol measured during the lawn mowing, the grass cutting was found to generate mainly two different types of aerosol particles: an intense ultrafine particle mode (1 h average: 4 μg m -3) of almost pure hydrocarbon-like organics and a distinct particle mode in the upper sub-micrometer size range containing particles with potassium and nitrogen-organic compounds. The ultrafine particles are probably lubricating oil particles from the lawn mower exhaust; the larger particles are swirled-up plant debris particles from the mowing process. While these particle types were identified in the data from the two mass spectrometers, the on-line aerosol concentration and size distribution data support these findings. The results presented here show that the combination of quantitative aerosol particle ensemble mass spectrometry (ToF-AMS) and single particle mass spectrometry (ATOFMS) provides much deeper insights into the nature of the aerosol properties than each of the instruments could do alone. Therefore a combined deployment of both types of instruments is strongly recommended.

  14. Deinking of different furnishes of recycled MOW, ONP, and OMG pulps in silicate-free conditions using organic complex of PHASS

    Directory of Open Access Journals (Sweden)

    Iman Akbarpour

    2013-02-01

    Full Text Available Sodium silicate causes problems in papermaking such as deposit formation, decreased retention, and lower sheet strength. Due to these problems, chemical deinking of different recycled papers furnishes including 100% ONP, 80% ONP, and 20% OMG, and a combination of 70% ONP/ 20% OMG/ 10% MOW was accomplished using an organic complexing agent which included poly-hydroxyl acrylic acid and sodium salt (PHAAS in silicate-free conditions. PHAAS was utilized at four levels of 0.3, 0.5, 0.7, and 1% (based on oven-dry weight of recycled paper rather than sodium silicate. The optical and physical properties of deinked pulp were compared to control pulp (conventional deinking containing 2% sodium silicate. The results showed that the paper brightness was improved and the yellowness, dirt count, and dirt area were decreased significantly by increasing PHAAS charge up to 0.9%. Also, in different recycled paper furnishes above mentioned, using different charges of PHAAS had different effects on paper opacity. Using different charges of PHAAS (especially 0.7 to 0.9% decreased paper caliper, increased paper air resistance, increased freeness, and gave similar or slightly better paper tear indices. Differences of tear indices were not significant at confidence level of 99%. Based on the present research, the use of 0.7 to 0.9% PHAAS in place of sodium silicate is advisable because of the better quality of final papers compared to conventional deinking process.

  15. Time of mowing and burning veld: short term effects on production ...

    African Journals Online (AJOL)

    In a comparison of mowing and burning as removal treatments in the Natal Tall Grassveld, mowing proved to be superior to burning in terms of sward productivity in the season following the removal treatment, but burning was responsible for a sward of higher protein content, at least during the early part of the season.

  16. Position paper on the impact of including methane number in natural gas regulation

    International Nuclear Information System (INIS)

    2014-01-01

    GIIGNL has developed a position paper to describe methane number and the possible impact on the LNG market of a future regulation/specification for this parameter which is linked to natural gas quality. Currently, there are several standards describing calculation methods of natural gas methane number, but there are doubts about their reliability and the results differ from each other. No official regulation which states a minimum value for methane number of natural gas has been identified. A methane number of 80, as recommended by some organisations in Europe, would endanger the LNG supply to the market, limiting acceptable LNG sources, or would require expensive gas treatment. In the long term, if there is a market for high methane number natural gas, this may be an opportunity for LNG terminals able to adjust or manage supplies to the desired methane number

  17. Electromagnetic Radiation : Variational Methods, Waveguides and Accelerators Including seminal papers of Julian Schwinger

    CERN Document Server

    Milton, Kimball A

    2006-01-01

    This is a graduate level textbook on the theory of electromagnetic radiation and its application to waveguides, transmission lines, accelerator physics and synchrotron radiation. It has grown out of lectures and manuscripts by Julian Schwinger prepared during the war at MIT's Radiation Laboratory, updated with material developed by Schwinger at UCLA in the 1970s and 1980s, and by Milton at the University of Oklahoma since 1994. The book includes a great number of straightforward and challenging exercises and problems. It is addressed to students in physics, electrical engineering, and applied mathematics seeking a thorough introduction to electromagnetism with emphasis on radiation theory and its applications.

  18. Influence of Mowing Artemisia tridentata ssp. wyomingensis on Winter Habitat for Wildlife

    Science.gov (United States)

    Davies, Kirk W.; Bates, Jonathan D.; Johnson, Dustin D.; Nafus, Aleta M.

    2009-07-01

    Mowing is commonly implemented to Artemisia tridentata ssp. wyomingensis (Beetle & A. Young) S.L. Welsh (Wyoming big sagebrush) plant communities to improve wildlife habitat, increase forage production for livestock, and create fuel breaks for fire suppression. However, information detailing the influence of mowing on winter habitat for wildlife is lacking. This information is crucial because many wildlife species depended on A. tridentata spp. wyomingensis plant communities for winter habitat and consume significant quantities of Artemisia during this time . Furthermore, information is generally limited describing the recovery of A. tridentata spp. wyomingensis to mowing and the impacts of mowing on stand structure. Stand characteristics and Artemisia leaf tissue crude protein (CP), acid detergent fiber (ADF), and neutral detergent fiber (NDF) concentrations were measured in midwinter on 0-, 2-, 4-, and 6-year-old fall-applied mechanical (mowed at 20 cm height) treatments and compared to adjacent untreated (control) areas. Mowing compared to the control decreased Artemisia cover, density, canopy volume, canopy elliptical area, and height ( P < 0.05), but all characteristics were recovering ( P < 0.05). Mowing A. tridentata spp. wyomingensis plant communities slightly increases the nutritional quality of Artemisia leaves ( P < 0.05), but it simultaneously results in up to 20 years of decrease in Artemisia structural characteristics. Because of the large reduction in A. tridentata spp. wyomingensis for potentially 20 years following mowing, mowing should not be applied in Artemisia facultative and obligate wildlife winter habitat. Considering the decline in A. tridentata spp. wyomingensis-dominated landscapes, we caution against mowing these communities.

  19. Papers

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    The chapters in this Volume 7 of a series of PAPERS are based on papers published in the period 2004 - 2008 authored/co-authored by Palle Thoft-Christensen......The chapters in this Volume 7 of a series of PAPERS are based on papers published in the period 2004 - 2008 authored/co-authored by Palle Thoft-Christensen...

  20. 77 FR 70477 - Verso Paper Corporation, Sartell Mill Division, Including On-Site Leased Workers From Securitas...

    Science.gov (United States)

    2012-11-26

    ..., Sartell Mill Division, Including On-Site Leased Workers From Securitas Security Services, Manpower, Inc..., applicable to workers and former workers of Verso Paper Corporation, Sartell Mill Division, Sartell... to TA-W-81,210 is hereby issued as follows: All workers of Verso Paper Corporation, Sartell Mill...

  1. Comparison of multi-enzyme and thermophilic bacteria on the hydrolysis of mariculture organic waste (MOW).

    Science.gov (United States)

    Guo, Liang; Sun, Mei; Zong, Yan; Zhao, Yangguo; Gao, Mengchun; She, Zonglian

    2016-01-01

    Mariculture organic waste (MOW) is rich in organic matter, which is a potential energy resource for anaerobic digestion. In order to enhance the anaerobic fermentation, the MOW was hydrolyzed by multi-enzyme and thermophilic bacteria. It was advantageous for soluble chemical oxygen demand (SCOD) release at MOW concentrations of 6 and 10 g/L with multi-enzyme and thermophilic bacteria pretreatments. For multi-enzyme, the hydrolysis was not obvious at substrate concentrations of 1 and 3 g/L, and the protein and carbohydrate increased with hydrolysis time at substrate concentrations of 6 and 10 g/L. For thermophilic bacteria, the carbohydrate was first released at 2-4 h and then consumed, and the protein increased with hydrolysis time. The optimal enzyme hydrolysis for MOW was determined by measuring the changes of SCOD, protein, carbohydrate, ammonia and total phosphorus, and comparing with acid and alkaline pretreatments.

  2. Attempting to restore herbaceous understories in Wyoming big sagebrush communities with mowing and seeding

    Science.gov (United States)

    Shrub steppe communities with depleted perennial herbaceous understories need to be restored to increase resilience, provide quality wildlife habitat, and improve ecosystem function. Mowing has been applied to Wyoming big sagebrush (Artemisia tridentata Nutt. ssp. wyomingensis Beetle &Young) steppe...

  3. Does the different mowing regime affect soil biological activity and floristic composition of thermophilous Pieniny meadow?

    Science.gov (United States)

    Józefowska, Agnieszka; Zaleski, Tomasz; Zarzycki, Jan

    2016-04-01

    The study area was located in the Pieniny National Park in the Carpathian Mountain (Southern Poland). About 30% of Park's area is covered by meadows. The climax stage of this area is forest. Therefore extensive use is indispensable action to keep semi-natural grassland such as termophilous Pieniny meadows, which are characterized by a very high biodiversity. The purpose of this research was to answer the question, how the different way of mowing: traditional scything (H), and mechanical mowing (M) or abandonment of mowing (N) effect on the biological activity of soil. Soil biological activity has been expressed by microbial and soil fauna activity. Microbial activity was described directly by count of microorganisms and indirectly by enzymatic activity (dehydrogenase - DHA) and the microbial biomass carbon content (MBC). Enchytraeidae and Lumbricidae were chosen as representatives of soil fauna. Density and species diversity of this Oligochaeta was determined. Samples were collected twice in June (before mowing) and in September (after mowing). Basic soil properties, such as pH value, organic carbon and nitrogen content, moisture and temperature, were determined. Mean count of vegetative bacteria forms, fungi and Actinobacteria was higher in H than M and N. Amount of bacteria connected with nitrification and denitrification process and Clostridium pasteurianum was the highest in soil where mowing was discontinued 11 years ago. The microbial activity measured indirectly by MBC and DHA indicated that the M had the highest activity. The soil biological activity in second term of sampling had generally higher activity than soil collected in June. That was probably connected with highest organic carbon content in soil resulting from mowing and the end of growing season. Higher earthworm density was in mowing soil (220 and 208 individuals m-2 in H and M respectively) compare to non-mowing one (77 ind. m-2). The density of Enchytraeidae was inversely, the higher density

  4. Mowing exacerbates the loss of ecosystem stability under nitrogen enrichment in a temperate grassland.

    Science.gov (United States)

    Zhang, Yunhai; Loreau, Michel; He, Nianpeng; Zhang, Guangming; Han, Xingguo

    2017-08-04

    1. Global reactive nitrogen (N) is projected to further increase in the coming years. Previous studies have demonstrated that N enrichment weakens the temporal stability of the ecosystem and the primary productivity through decreased biodiversity and species asynchrony. Mowing is a globally common practise in grasslands; and infrequent mowing can maintain or increase plant diversity under N enrichment conditions. However, it is unclear how infrequent mowing affects ecosystem stability in the face of N enrichment. 2. By independently manipulating the frequency (twice vs. monthly additions per year) and rate (i.e. 0, 1, 2, 3, 5, 10, 15, 20, and 50 g N m -2 year -1 ) of NH 4 NO 3 inputs and mowing (unmown vs. mown) over 3 years (2011-2013) in a temperate grassland of northern China, we aimed to examine the interactive effects of N enrichment and mowing on ecosystem stability. 3. The results show that mowing maintained a positive relationship between species richness and ecosystem stability despite N addition, but that it exacerbated the negative effects of N addition on ecosystem stability. Mowing increased mean primary productivity and plant species richness, but it also increased the synchrony of population fluctuations and the variability of primary productivity under N enrichment, thereby contributing to a decline in the ecosystem stability. 4. Thus, our study reveals that infrequent mowing can buffer the negative effects of N enrichment on biodiversity to some extent and further increase the primary productivity, but it exacerbates the loss of ecosystem stability with N enrichment, thereby threatening local and/or semiarid regional food security.

  5. Mowing Submerged Macrophytes in Shallow Lakes with Alternative Stable States: Battling the Good Guys?

    Science.gov (United States)

    Kuiper, Jan J.; Verhofstad, Michiel J. J. M.; Louwers, Evelien L. M.; Bakker, Elisabeth S.; Brederveld, Robert J.; van Gerven, Luuk P. A.; Janssen, Annette B. G.; de Klein, Jeroen J. M.; Mooij, Wolf M.

    2017-04-01

    Submerged macrophytes play an important role in maintaining good water quality in shallow lakes. Yet extensive stands easily interfere with various services provided by these lakes, and harvesting is increasingly applied as a management measure. Because shallow lakes may possess alternative stable states over a wide range of environmental conditions, designing a successful mowing strategy is challenging, given the important role of macrophytes in stabilizing the clear water state. In this study, the integrated ecosystem model PCLake is used to explore the consequences of mowing, in terms of reducing nuisance and ecosystem stability, for a wide range of external nutrient loadings, mowing intensities and timings. Elodea is used as a model species. Additionally, we use PCLake to estimate how much phosphorus is removed with the harvested biomass, and evaluate the long-term effect of harvesting. Our model indicates that mowing can temporarily reduce nuisance caused by submerged plants in the first weeks after cutting, particularly when external nutrient loading is fairly low. The risk of instigating a regime shift can be tempered by mowing halfway the growing season when the resilience of the system is highest, as our model showed. Up to half of the phosphorus entering the system can potentially be removed along with the harvested biomass. As a result, prolonged mowing can prevent an oligo—to mesotrophic lake from becoming eutrophic to a certain extent, as our model shows that the critical nutrient loading, where the lake shifts to the turbid phytoplankton-dominated state, can be slightly increased.

  6. Analysis of scientific papers included in the sciences citation index expanded written by South korean plastic surgeons: 2001-2010.

    Science.gov (United States)

    Go, Ju Young; Mun, Goo-Hyun; Jeon, Byung-Joon; Lim, So-Young; Pyon, Jai-Kyong; Bang, Sa-Ik; Oh, Kap Sung; Shin, Myoung-Soo

    2012-01-01

    The purpose of our study was to analyze scientific papers published by South Korean plastic surgeons in journals included in the Science Citation Index Expanded (SCIE), and to evaluate the publication and research activities of Korean plastic surgeon. We conducted a survey of SCIE papers in the field of plastic surgery published by South Korean authors between 2001 and 2010 using Web of Science software. We further analyzed these results according to the number of publications per year, journals, institution, and type of papers. We also compared the total number of citations to published scientific papers. We analyzed the rank of South Korea among other countries in representative journals. Overall, 667 papers were published by South Korean authors between 2001 and 2010. The number of publications increased dramatically from 2003 (n=31) to 2010 (n=139). Subsequently, the ten most productive Korean medical colleges were identified. All published papers received 2,311 citations and the citation to paper ratio was 3.49. The rank of Korea among other countries in terms of the number of published papers remained in the top 10 during the recent 10 years. Publication output of Korean plastic surgeon over the last 10 years showed a remarkable growth in terms of quantity and quality. Currently, Korea is among the top six countries in representative plastic surgery journals. Korean plastic surgeons have played a central role in this progress, and it is anticipated that they will continue to do so in the future.

  7. Combining glyphosate with burning or mowing improves control of Yellow Bluestem (Bothriochloa ischaemum)

    Science.gov (United States)

    Robertson, S.; Hickman, Karen R.; Harmoney, Keith R.; Leslie,, David M.

    2013-01-01

    The invasive yellow bluestem (Bothriochloa ischaemum [L.] Keng) threatens native biodiversity, and its control is of interest to land managers involved in restoration of invaded grasslands. We used single, double, and triple applications of glyphosate (2.125 kg ai.ha-1.application-1) over the course of one growing season in combinations at different timings (early, middle, late season) with and without a mechanical treatment of mowing or burning to determine the most effective control method. One year after treatment, burning and mowing prior to a mid-season single or double early, middle, and/or late season herbicide application resulted in a similar level of control of yellow bluestem relative to a triple herbicide application, all of which had greater control relative to herbicide treatment alone. Reproductive tiller density and visual obstruction increased 2 yr after treatment with two herbicide treatments applied either early and middle season or early and late season, but it was prevented with burning and mowing prior to herbicide application. With the exception of three herbicide applications, combining burning or mowing with herbicide applications provided more effective control of yellow bluestem than any individual herbicide applications. Burning or mowing likely improves glyphosate effectiveness by altering the invasive grass structure so that plants are clear of standing dead and have shorter, active regrowth to enhance herbicide effectiveness. During restoration projects requiring control of invasive yellow bluestem, an effective management option is a combination of mechanical and chemical control.

  8. 75 FR 71427 - Domtar Paper Company, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

    Science.gov (United States)

    2010-11-23

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER11-2020-000] Domtar Paper... proceeding, of Domtar Paper Company, LLC's application for market-based rate authority, with an accompanying... of protests and interventions in lieu of paper, using the FERC Online links at http://www.ferc.gov...

  9. Effects of mowing cessation and hydrology on plant trait distribution in natural fen meadows

    NARCIS (Netherlands)

    Opdekamp, W.; Beauchard, O.; Backx, H.; Franken, F.; Cox, T.J.S.; Van Diggelen, R.; Meire, P.

    2012-01-01

    Traditional grasslands are often of high conservation value, but depend on non-intensive management like mowing for their preservation. During the 20th century, traditional agricultural usage was either heavily intensified or abandoned due to socio-economic reasons. In Eastern Europe, land

  10. Do Children Understand the Basic Relationship Between Speech and Writing? The Mow-Motorcycle Test.

    Science.gov (United States)

    Rozin, Paul; And Others

    School children (N=218) who have not yet attained moderate reading fluency were tested for their awareness of a fundamental relationship between our writing system and speech: that the sounds of speech are represented in writing. Children were shown a long and short word written on a card (e.g., mow and motorcycle), and asked which word…

  11. The effect of winter burning and mowing on seasonal herbage yield ...

    African Journals Online (AJOL)

    The response of Eragrostis curvula cv. Ermelo to three levels of fertilizer (no nitrogen or phosphorus; 53 kg nitrogen + 16 kg phosphorus per ha; and 106 kg nitrogen + 32 kg phosphorus per ha), three times of removing unutilized herbage (July, August and September) and three methods of herbage removal (annual mowing ...

  12. Effects of vegetation management by mowing on ground-dwelling arthropods

    NARCIS (Netherlands)

    Noordijk, J.; Schaffers, A.P.; Sykora, K.V.

    2010-01-01

    Species-rich grasslands are rare in the Netherlands and need consistent vegetation management to retain their characteristic biodiversity. Roadside verges are important refuges for grassland plants since the mowing management no longer aims at traffic safety only but also strives for botanical

  13. Effect of repeated mowing to reduce graminoid plant cover on the moss carpet at a Sphagnum farm in North America

    Directory of Open Access Journals (Sweden)

    M. Guêné-Nanchen

    2017-09-01

    Full Text Available Sphagnum farming is defined as the sustainable production of non-decomposed Sphagnum biomass on a cyclical and renewable basis. In this article, the influence and necessity of mowing graminoid plants to optimise Sphagnum growth in Sphagnum farming basins are examined. Repeated mowing was applied to reduce graminoid plant cover at two different stages of the production cycle (one-year-old and seven-year-old Sphagnum moss carpet at the beginning of the experiment at an experimental Sphagnum farm in eastern Canada. Sphagnum growth (cover, biomass, moss layer thickness was measured after three years of mowing. In addition, a greenhouse experiment was carried out to determine whether there is a threshold for graminoid plant cover beyond which mowing becomes necessary. Sphagnum cover and biomass were not affected by repeated mowing, even if mowing reduced the cover of graminoid plants. Thus, it appears that mowing is unnecessary if the dominant vascular species is a graminoid plant such as Eriophorum angustifolium, which accumulates minimal amounts of litter. Furthermore, high cover of Eriophorum angustifolium (up to 85 % did not affect Sphagnum cover in a density-controlled greenhouse experiment. When the specific goal is Sphagnum fibre production, decisions about control of graminoid plants should be made after considering the cover, life form and litter accumulation potentials of the dominant graminoid species involved.

  14. A two-dimensional model of the pressing section of a paper machine including dynamic capillary effects

    KAUST Repository

    Iliev, Oleg P.

    2013-05-15

    Paper production is a problem with significant importance for society; it is also a challenging topic for scientific investigation. This study is concerned with the simulation of the pressing section of a paper machine. A two-dimensional model is developed to account for the water flow within the pressing zone. A Richards-type equation is used to describe the flow in the unsaturated zone. The dynamic capillary pressure-saturation relation is adopted for the paper production process. The mathematical model accounts for the coexistence of saturated and unsaturated zones in a multilayer computational domain. The discretization is performed by the MPFA-O method. Numerical experiments are carried out for parameters that are typical of the production process. The static and dynamic capillary pressure-saturation relations are tested to evaluate the influence of the dynamic capillary effect. © 2013 Springer Science+Business Media Dordrecht.

  15. A two-dimensional model of the pressing section of a paper machine including dynamic capillary effects

    KAUST Repository

    Iliev, Oleg P.; Printsypar, Galina; Rief, Stefan

    2013-01-01

    is developed to account for the water flow within the pressing zone. A Richards-type equation is used to describe the flow in the unsaturated zone. The dynamic capillary pressure-saturation relation is adopted for the paper production process. The mathematical

  16. Terminology - glossary including acronyms and quotations in use for the conservative spinal deformities treatment: 8th SOSORT consensus paper

    Directory of Open Access Journals (Sweden)

    Pizzetti Paolo

    2010-11-01

    Full Text Available Abstract Background This report is the SOSORT Consensus Paper on Terminology for use in the treatment of conservative spinal deformities. Figures are provided and relevant literature is cited where appropriate. Methods The Delphi method was used to reach a preliminary consensus before the meeting, where the terms that still needed further clarification were discussed. Results A final agreement was found for all the terms, which now constitute the base of this glossary. New terms will be added after being discussed and accepted. Discussion When only one set of terms is used for communication in a place or among a group of people, then everyone can clearly and efficiently communicate. This principle applies for any professional group. Until now, no common set of terms was available in the field of the conservative treatment of scoliosis and spinal deformities. This glossary gives a common base language to draw from to discuss data, findings and treatment.

  17. Terminology - glossary including acronyms and quotations in use for the conservative spinal deformities treatment: 8th SOSORT consensus paper.

    Science.gov (United States)

    Grivas, Theodoros B; de Mauroy, Jean Claude; Négrini, Stefano; Kotwicki, Tomasz; Zaina, Fabio; Wynne, James H; Stokes, Ian A; Knott, Patrick; Pizzetti, Paolo; Rigo, Manuel; Villagrasa, Monica; Weiss, Hans Rudolf; Maruyama, Toru

    2010-11-02

    This report is the SOSORT Consensus Paper on Terminology for use in the treatment of conservative spinal deformities. Figures are provided and relevant literature is cited where appropriate. The Delphi method was used to reach a preliminary consensus before the meeting, where the terms that still needed further clarification were discussed. A final agreement was found for all the terms, which now constitute the base of this glossary. New terms will be added after being discussed and accepted. When only one set of terms is used for communication in a place or among a group of people, then everyone can clearly and efficiently communicate. This principle applies for any professional group. Until now, no common set of terms was available in the field of the conservative treatment of scoliosis and spinal deformities. This glossary gives a common base language to draw from to discuss data, findings and treatment.

  18. Effect of mowing and grazing on ramet emergence of Leymus ...

    African Journals Online (AJOL)

    user

    2011-03-21

    Mar 21, 2011 ... the ramets emergence characteristics. The primary effect of the treatments was significant changes in .... calcicorthic aridisol (US soil taxonomy classification system). .... tative growth and the geographical distribution of plants. This paper shows .... Spatial pattern changes in aboveground plant biomass in a ...

  19. Mowing mitigates bioactivity of neonicotinoid insecticides in nectar of flowering lawn weeds and turfgrass guttation.

    Science.gov (United States)

    Larson, Jonathan L; Redmond, Carl T; Potter, Daniel A

    2015-01-01

    Systemic neonicotinoid insecticides are used to control turfgrass insect pests. The authors tested their transference into nectar of flowering lawn weeds or grass guttation droplets, which, if high enough, could be hazardous to bees or other insects that feed on such exudates. The authors applied imidacloprid or clothianidin to turf with white clover, followed by irrigation, and used liquid chromatography-tandem mass spectrometry (LC-MS/MS) to analyze residues in clover blooms that were directly sprayed during application or that formed after the first mowing. Imidacloprid residues in guttation fluid from field-grown creeping bentgrass were assessed similarly. The authors used Orius insidiosus, a small anthrocorid bug that is sensitive to dietary neonicotinoids, as a bioindicator of the exudates' toxicity. Nectar from directly sprayed clover blooms contained 5493 ng/g to 6588 ng/g imidacloprid or 2882 ng/g to 2992 ng/g clothianidin and was acutely toxic to Orius. Residues were 99.4% to 99.8% lower in nectar of blooms formed after mowing, and nontoxic to Orius. Imidacloprid residues in turfgrass guttation averaged 88 ng/g at 1 wk after treatment, causing some intoxication of Orius, but declined to 23 ng/g within 3 wk. Systemic transference of neonicotinoids into white clover nectar and creeping bentgrass guttation appears relatively low and transitory. The hazard to nontarget insects via nectar of flowering weeds in treated lawns can be mitigated by adhering to label precautions and mowing to remove blooms if they are inadvertently sprayed. © 2014 SETAC.

  20. Automatic detection of animals in mowing operations using thermal cameras.

    Science.gov (United States)

    Steen, Kim Arild; Villa-Henriksen, Andrés; Therkildsen, Ole Roland; Green, Ole

    2012-01-01

    During the last decades, high-efficiency farming equipment has been developed in the agricultural sector. This has also included efficiency improvement of moving techniques, which include increased working speeds and widths. Therefore, the risk of wild animals being accidentally injured or killed during routine farming operations has increased dramatically over the years. In particular, the nests of ground nesting bird species like grey partridge (Perdix perdix) or pheasant (Phasianus colchicus) are vulnerable to farming operations in their breeding habitat, whereas in mammals, the natural instinct of e.g., leverets of brown hare (Lepus europaeus) and fawns of roe deer (Capreolus capreolus) to lay low and still in the vegetation to avoid predators increase their risk of being killed or injured in farming operations. Various methods and approaches have been used to reduce wildlife mortality resulting from farming operations. However, since wildlife-friendly farming often results in lower efficiency, attempts have been made to develop automatic systems capable of detecting wild animals in the crop. Here we assessed the suitability of thermal imaging in combination with digital image processing to automatically detect a chicken (Gallus domesticus) and a rabbit (Oryctolagus cuniculus) in a grassland habitat. Throughout the different test scenarios, our study animals were detected with a high precision, although the most dense grass cover reduced the detection rate. We conclude that thermal imaging and digital imaging processing may be an important tool for the improvement of wildlife-friendly farming practices in the future.

  1. Automatic Detection of Animals in Mowing Operations Using Thermal Cameras

    Directory of Open Access Journals (Sweden)

    Ole Green

    2012-06-01

    Full Text Available During the last decades, high-efficiency farming equipment has been developed in the agricultural sector. This has also included efficiency improvement of moving techniques, which include increased working speeds and widths. Therefore, the risk of wild animals being accidentally injured or killed during routine farming operations has increased dramatically over the years. In particular, the nests of ground nesting bird species like grey partridge (Perdix perdix or pheasant (Phasianus colchicus are vulnerable to farming operations in their breeding habitat, whereas in mammals, the natural instinct of e.g., leverets of brown hare (Lepus europaeus and fawns of roe deer (Capreolus capreolus to lay low and still in the vegetation to avoid predators increase their risk of being killed or injured in farming operations. Various methods and approaches have been used to reduce wildlife mortality resulting from farming operations. However, since wildlife-friendly farming often results in lower efficiency, attempts have been made to develop automatic systems capable of detecting wild animals in the crop. Here we assessed the suitability of thermal imaging in combination with digital image processing to automatically detect a chicken (Gallus domesticus and a rabbit (Oryctolagus cuniculus in a grassland habitat. Throughout the different test scenarios, our study animals were detected with a high precision, although the most dense grass cover reduced the detection rate. We conclude that thermal imaging and digital imaging processing may be an important tool for the improvement of wildlife-friendly farming practices in the future.

  2. Diversification of mowing regime increases arthropods diversity in species-poor cultural hay meadows

    Czech Academy of Sciences Publication Activity Database

    Čížek, O.; Zámečník, J.; Tropek, Robert; Kočárek, P.; Konvička, Martin

    2012-01-01

    Roč. 16, č. 2 (2012), s. 215-226 ISSN 1366-638X R&D Projects: GA MŠk LC06073; GA ČR GD206/08/H044; GA MŽP SP/2D3/62/08 Grant - others:Czech Agency for Nature Conservation(CZ) PPK-35a/62/06 Institutional research plan: CEZ:AV0Z50070508 Keywords : hay meadows * arthropods conservation * mowing regimes Subject RIV: EH - Ecology, Behaviour Impact factor: 1.801, year: 2012 http://www.muzeumhk.cz/files/jaroslav_zamecnik/2012_cizek_zamecnik.pdf

  3. Comparative study of NiW, NiMo and MoW prepared by mechanical alloying

    International Nuclear Information System (INIS)

    Gonzalez, G.; Sagarzazu, A.; Villalba, R.; Ochoa, J.

    2007-01-01

    The present work concern the amorphisation process induced by mechanical alloying in the NiW, NiMo and MoW systems. The alloys chosen combine a group of transition elements varying from very similar atomic radius and electronic valences (MoW) to different ones (NiW and NiMo). The three systems achieved an amorphous state after 50 h of milling. The mechanism of amorphisation proposed for NiW and NiMo was the combined effect of an excess concentration of the solute atoms entering into the structure of one of the elements and a critical concentration of defects. Continuous formation of an amorphous phase at the interface of the crystalline phase was observed during the process. MoW seems to amorphize by continuous reduction of grain size down to a critical value where the amorphisation takes place

  4. Analysis of scientific papers in the field of radiology and medical imaging included in Science Citation Index expanded and published by Turkish authors.

    Science.gov (United States)

    Akpinar, Erhan; Karçaaltincaba, Muşturay

    2010-09-01

    We aimed to analyze scientific papers published by Turkish authors in "radiology, nuclear medicine and medical imaging" journals included in the Science Citation Index Expanded and compared the number of published scientific papers from Turkey and other countries. We retrospectively searched all papers published by Turkish authors between 1945 and 2008 by using Web of Science software. We performed the analysis by typing "Turkey" in the address section and all radiology and medical imaging journals in the source title section using the general search function of the software. We further analyzed these results by using "analyze" function of the software according to the number of publications per year, journals, institution and type of papers. We also calculated total number of citations to published scientific papers using citation report function. We analyzed the rank of Turkey among other countries in terms of the number of published papers. Overall, 4,532 papers were published between 1945 and 2008. The first paper was published in 1976. Number of publications increased dramatically from 1976 (n = 1) to 2008 (n = 383). The top 5 journals publishing papers from Turkish authors were European Journal of Nuclear Medicine and Molecular Imaging (n = 328), Clinical Nuclear Medicine (n = 296), European Journal of Radiology (n = 289), European Radiology (n = 207) and Journal of Clinical Ultrasound (n = 186). All published papers received 18,419 citations and citation to paper ratio was 4.06. The rank of Turkey among other countries in terms of published papers improved during the last 25 years. Number of papers from Turkey published in radiology and medical imaging journals has increased at the start of the new millennium. Currently, Turkey is among the top 12 countries when the number of scientific papers published in radiology journals is taken into consideration.

  5. The Effect of Artificial Mowing on the Competition of Phragmites australis and Spartina alterniflora in the Yangtze Estuary

    Directory of Open Access Journals (Sweden)

    Yue Yuan

    2017-01-01

    Full Text Available Spartina alterniflora Loisel. is one of the most invasive species in the world. However, little is known about the role of artificial mowing in its invasiveness and competiveness. In this work, we studied the effect of mowing on its interspecific interactions with native species Phragmites australis (Cav. Trin ex Steud of the Yangtze Estuary, China. We calculated their relative neighbor effect (RNE index, effect of relative crowding (Dr index, and interaction strength (I index. The results showed that the RNE of Phragmites australis and Spartina alterniflora was 0.354 and 0.619, respectively, and they have competitive interactions. The mowing treatments can significantly influence the RNE of Phragmites australis and Spartina alterniflora on each other. Concretely, the RNE of Spartina alterniflora in the removal treatments was significantly higher than the value in the controls. But the RNE of Phragmites australis in the removal treatments was significantly lower than the value in the controls. Meanwhile, Dr of the two species on the targets was higher in the removal treatments than that in the controls, and the opposite was for I. We concluded that artificial mowing could promote the invasion of Spartina alterniflora by increasing its competitive performance compared with native species.

  6. Mathematically modelling the power requirement for a vertical shaft mowing machine

    Directory of Open Access Journals (Sweden)

    Jorge Simón Pérez de Corcho Fuentes

    2008-09-01

    Full Text Available This work describes a mathematical model for determining the power demand for a vertical shaft mowing machine, particularly taking into account the influence of speed on cutting power, which is different from that of other models of mowers. The influence of the apparatus’ rotation and translation speeds was simulated in determining power demand. The results showed that no chan-ges in cutting power were produced by varying the knives’ angular speed (if translation speed was constant, while cutting power became increased if translation speed was increased. Variations in angular speed, however, influenced other parameters deter-mining total power demand. Determining this vertical shaft mower’s cutting pattern led to obtaining good crop stubble quality at the mower’s lower rotation speed, hence reducing total energy requirements.

  7. Development of a Motorized Afifia Mowing Machine Design for Controlling Environmental Conservation and Menace for Home Use

    Directory of Open Access Journals (Sweden)

    Gbasouzor Austin Ikechukwu

    2017-01-01

    Full Text Available Technology has become more affordable and penetrates every aspect of daily life, even in developing country like Nigeria. However many of the users in developing countries are still finding difficulty in using the technologies due to lack of experience as they undergo a technology leap. The aim of this research work explores the approach in designing, development of a motorized Afifia (grass mowing machine. This research was considered because of the unhygienic environmental conservation and its menace. An estimate of 20N was adopted as the required force to cut lawns and based on this design force of 70N was chosen. This design force was the basis of characterizing the selection of materials use, as a result it was found that the machine is 85% efficient based on the area mowed per hour which is 390.6m2.

  8. Allelopathic cover crop prior to seeding is more important than subsequent grazing/mowing in grassland establishment

    Science.gov (United States)

    Milchunas, Daniel G.; Vandever, Mark W.; Ball, Leonard O.; Hyberg, Skip

    2011-01-01

    The effects of grazing, mowing, and type of cover crop were evaluated in a previous winter wheat–fallow cropland seeded to grassland under the Conservation Reserve Program in eastern Colorado. Prior to seeding, the fallow strips were planted to forage sorghum or wheat in alternating strips (cover crops), with no grazing, moderate to heavy grazing, and mowing (grazing treatments) superimposed 4 yr after planting and studied for 3 yr. Plots previously in wheat had more annual and exotic species than sorghum plots. Concomitantly, there were much greater abundances of perennial native grass and all native species in sorghum than wheat cropped areas. The competitive advantage gained by seeded species in sorghum plots resulted in large increases in rhizomatous western wheatgrass. Sorghum is known to be allelopathic and is used in crop agriculture rotations to suppress weeds and increase crop yields, consistent with the responses of weed and desired native species in this study. Grazing treatment had relatively minor effects on basal and canopy cover composition of annual or exotic species versus perennial native grass or native species. Although grazing treatment never was a significant main effect, it occasionally modified cover crop or year effects. Opportunistic grazing reduced exotic cheatgrass by year 3 but also decreased the native palatable western wheatgrass. Mowing was a less effective weed control practice than grazing. Vegetative basal cover and aboveground primary production varied primarily with year. Common management practices for revegetation/restoration currently use herbicides and mowing as weed control practices and restrict grazing in all stages of development. Results suggest that allelopathic cover crop selection and opportunistic grazing can be effective alternative grass establishment and weed control practices. Susceptibility, resistance, and interactions of weed and seeded species to allelopathic cover species/cultivars may be a fruitful area

  9. A novel Mo-W interlayer approach for CVD diamond deposition on steel

    Energy Technology Data Exchange (ETDEWEB)

    Kundrát, Vojtěch; Sullivan, John; Ye, Haitao, E-mail: h.ye@aston.ac.uk [School of Engineering and Applied Science, Aston University, Birmingham, B4 7ET (United Kingdom); Zhang, Xiaoling; Cooke, Kevin; Sun, Hailin [Miba Coating Group: Teer Coatings Ltd, West-Stone-House, West-Stone, Berry-Hill-Industrial-Estate, WR9 9AS, Droitwich (United Kingdom)

    2015-04-15

    Steel is the most widely used material in engineering for its cost/performance ratio and coatings are routinely applied on its surface to further improve its properties. Diamond coated steel parts are an option for many demanding industrial applications through prolonging the lifetime of steel parts, enhancement of tool performance as well as the reduction of wear rates. Direct deposition of diamond on steel using conventional chemical vapour deposition (CVD) processes is known to give poor results due to the preferential formation of amorphous carbon on iron, nickel and other elements as well as stresses induced from the significant difference in the thermal expansion coefficients of those materials. This article reports a novel approach of deposition of nanocrystalline diamond coatings on high-speed steel (M42) substrates using a multi-structured molybdenum (Mo) – tungsten (W) interlayer to form steel/Mo/Mo-W/W/diamond sandwich structures which overcome the adhesion problem related to direct magnetron sputtering deposition of pure tungsten. Surface, interface and tribology properties were evaluated to understand the role of such an interlayer structure. The multi-structured Mo-W interlayer has been proven to improve the adhesion between diamond films and steel substrates by acting as an effective diffusion barrier during the CVD diamond deposition.

  10. A novel Mo-W interlayer approach for CVD diamond deposition on steel

    Science.gov (United States)

    Kundrát, Vojtěch; Zhang, Xiaoling; Cooke, Kevin; Sun, Hailin; Sullivan, John; Ye, Haitao

    2015-04-01

    Steel is the most widely used material in engineering for its cost/performance ratio and coatings are routinely applied on its surface to further improve its properties. Diamond coated steel parts are an option for many demanding industrial applications through prolonging the lifetime of steel parts, enhancement of tool performance as well as the reduction of wear rates. Direct deposition of diamond on steel using conventional chemical vapour deposition (CVD) processes is known to give poor results due to the preferential formation of amorphous carbon on iron, nickel and other elements as well as stresses induced from the significant difference in the thermal expansion coefficients of those materials. This article reports a novel approach of deposition of nanocrystalline diamond coatings on high-speed steel (M42) substrates using a multi-structured molybdenum (Mo) - tungsten (W) interlayer to form steel/Mo/Mo-W/W/diamond sandwich structures which overcome the adhesion problem related to direct magnetron sputtering deposition of pure tungsten. Surface, interface and tribology properties were evaluated to understand the role of such an interlayer structure. The multi-structured Mo-W interlayer has been proven to improve the adhesion between diamond films and steel substrates by acting as an effective diffusion barrier during the CVD diamond deposition.

  11. Recent progress on RE2O3-Mo/W emission materials.

    Science.gov (United States)

    Wang, Jinshu; Zhang, Xizhu; Liu, Wei; Cui, Yuntao; Wang, Yiman; Zhou, Meiling

    2012-08-01

    RE2O3-Mo/W cathodes were prepared by powder metallurgy method. La2O3-Y2O3-Mo cermet cathodes prepared by traditional sintering method and spark plasma sintering (SPS) exhibit different secondary emission properties. The La2O3-Y2O3-Mo cermet cathode prepared by SPS method has smaller grain size and exhibits better secondary emission performance. Monte carlo calculation results indicate that the secondary electron emission way of the cathode correlates with the grain size. Decreasing the grain size can decrease the positive charging effect of RE2O3 and thus is favorable for the escaping of secondary electrons to vacuum. The Scandia doped tungsten matrix dispenser cathode with a sub-micrometer microstructure of matrix with uniformly distributed nanometer-particles of Scandia has good thermionic emission property. Over 100 A/cm2 full space charge limited current density can be obtained at 950Cb. The cathode surface is covered by a Ba-Sc-O active surface layer with nano-particles distributing mainly on growth steps of W grains, leads to the conspicuous emission property of the cathode.

  12. A novel Mo-W interlayer approach for CVD diamond deposition on steel

    Directory of Open Access Journals (Sweden)

    Vojtěch Kundrát

    2015-04-01

    Full Text Available Steel is the most widely used material in engineering for its cost/performance ratio and coatings are routinely applied on its surface to further improve its properties. Diamond coated steel parts are an option for many demanding industrial applications through prolonging the lifetime of steel parts, enhancement of tool performance as well as the reduction of wear rates. Direct deposition of diamond on steel using conventional chemical vapour deposition (CVD processes is known to give poor results due to the preferential formation of amorphous carbon on iron, nickel and other elements as well as stresses induced from the significant difference in the thermal expansion coefficients of those materials. This article reports a novel approach of deposition of nanocrystalline diamond coatings on high-speed steel (M42 substrates using a multi-structured molybdenum (Mo – tungsten (W interlayer to form steel/Mo/Mo-W/W/diamond sandwich structures which overcome the adhesion problem related to direct magnetron sputtering deposition of pure tungsten. Surface, interface and tribology properties were evaluated to understand the role of such an interlayer structure. The multi-structured Mo-W interlayer has been proven to improve the adhesion between diamond films and steel substrates by acting as an effective diffusion barrier during the CVD diamond deposition.

  13. Estimated Mortality of Selected Migratory Bird Species from Mowing and Other Mechanical Operations in Canadian Agriculture

    Directory of Open Access Journals (Sweden)

    Joerg Tews

    2013-12-01

    Full Text Available Mechanical operations such as mowing, tilling, seeding, and harvesting are well-known sources of direct avian mortality in agricultural fields. However, there are currently no mortality rate estimates available for any species group or larger jurisdiction. Even reviews of sources of mortality in birds have failed to address mechanical disturbance in farm fields. To overcome this information gap we provide estimates of total mortality rates by mechanical operations for five selected species across Canada. In our step-by-step modeling approach we (i quantified the amount of various types of agricultural land in each Bird Conservation Region (BCR in Canada, (ii estimated population densities by region and agricultural habitat type for each selected species, (iii estimated the average timing of mechanical agricultural activities, egg laying, and fledging, (iv and used these values and additional demographical parameters to derive estimates of total mortality by species within each BCR. Based on our calculations the total annual estimated incidental take of young ranged from ~138,000 for Horned Lark (Eremophila alpestris to as much as ~941,000 for Savannah Sparrow (Passerculus sandwichensis. Net losses to the fall flight of birds, i.e., those birds that would have fledged successfully in the absence of mechanical disturbance, were, for example ~321,000 for Bobolink (Dolichonyx oryzivorus and ~483,000 for Savannah Sparrow. Although our estimates are subject to an unknown degree of uncertainty, this assessment is a very important first step because it provides a broad estimate of incidental take for a set of species that may be particularly vulnerable to mechanical operations and a starting point for future refinements of model parameters if and when they become available.

  14. Isothermal and dynamic oxidation behaviour of Mo-W doped carbon-based coating

    Science.gov (United States)

    Mandal, Paranjayee; Ehiasarian, Arutiun P.; Hovsepian, Papken Eh.

    2015-10-01

    The oxidation behaviour of Mo-W doped carbon-based coating (Mo-W-C) is investigated in elevated temperature (400-1000 °C). Strong metallurgical bond between Mo-W-C coating and substrate prevents any sort of delamination during heat-treatment. Isothermal oxidation tests show initial growth of metal oxides at 500 °C, however graphitic nature of the as-deposited coating is preserved. The oxidation progresses with further rise in temperature and the substrate is eventually exposed at 700 °C. The performance of Mo-W-C coating is compared with a state-of-the-art DLC(Cr/Cr-WC/W:C-H/a:C-H) coating, which shows preliminary oxidation at 400 °C and local delamination of the coating at 500 °C leading to substrate exposure. The graphitisation starts at 400 °C and the diamond-like structure is completely converted into the graphite-like structure at 500 °C. Dynamic oxidation behaviour of both the coatings is investigated using Thermo-gravimetric analysis carried out with a slow heating rate of 1 °C/min from ambient temperature to 1000 °C. Mo-W-C coating resists oxidation up to ˜800 °C whereas delamination of DLC(Cr/Cr-WC/W:C-H/a:C-H) coating is observed beyond ˜380 °C. In summary, Mo-W-C coating provides improved oxidation resistance at elevated temperature compared to DLC(Cr/Cr-WC/W:C-H/a:C-H) coating.

  15. Preliminary analysis on mowing and harvesting grass along riverbanks for the supply of anaerobic digestion plants in north-eastern Italy

    Directory of Open Access Journals (Sweden)

    Davide Boscaro

    2015-10-01

    Full Text Available The increasing demand of vegetal biomass for biogas production is causing competition with food production. To reduce this problem and to provide new opportunities it is necessary to take into consideration different kinds of vegetable biomass that are more sustainable. Grass from the maintenance of non-cultivated areas such as riverbanks has not yet been fully studied as a potential biomass for biogas production. Although grass has lower methane potential, it could be interesting because it does not compete with food production. However, there is a lack of appropriate technologies and working system adapted to these areas. In this paper, different systems that could be available for the mowing and harvesting of grass along riverbanks have been preliminarily assessed through the evaluation of the field capacity, labour requirement, economic and energy aspects. The splitting of the cutting and harvesting phases into operations with different machinery seems to be the best system for handling this biomass. However, these solutions have to take into consideration the presence of obstacles or accessibility problems in the harvesting areas that could limit the operational feasibility and subsequent correct sizing.

  16. The interplay of stress and mowing disturbance for the intensity and importance of plant interactions in dry calcareous grasslands.

    Science.gov (United States)

    Maalouf, Jean-Paul; Le Bagousse-Pinguet, Yoann; Marchand, Lilian; Touzard, Blaise; Michalet, Richard

    2012-09-01

    There is still debate regarding the direction and strength of plant interactions under intermediate to high levels of stress. Furthermore, little is known on how disturbance may interact with physical stress in unproductive environments, although recent theory and models have shown that this interplay may induce a collapse of plant interactions and diversity. The few studies assessing such questions have considered the intensity of biotic interactions but not their importance, although this latter concept has been shown to be very useful for understanding the role of interactions in plant communities. The objective of this study was to assess the interplay between stress and disturbance for plant interactions in dry calcareous grasslands. A field experiment was set up in the Dordogne, southern France, where the importance and intensity of biotic interactions undergone by four species were measured along a water stress gradient, and with and without mowing disturbance. The importance and intensity of interactions varied in a very similar way along treatments. Under undisturbed conditions, plant interactions switched from competition to neutral with increasing water stress for three of the four species, whereas the fourth species was not subject to any significant biotic interaction along the gradient. Responses to disturbance were more species-specific; for two species, competition disappeared with mowing in the wettest conditions, whereas for the two other species, competition switched to facilitation with mowing. Finally, there were no significant interactions for any species in the disturbed and driest conditions. At very high levels of stress, plant performances become too weak to allow either competition or facilitation and disturbance may accelerate the collapse of interactions in dry conditions. The results suggest that the importance and direction of interactions are more likely to be positively related in stressful environments.

  17. The British research evidence for recovery, papers published between 2006 and 2009 (inclusive). Part two: a review of the grey literature including book chapters and policy documents.

    Science.gov (United States)

    Stickley, T; Wright, N

    2011-05-01

    This paper is the second in a series of two which reviews the current UK evidence base for recovery in mental health. As outlined in the previous paper, over the last 4 years a vast amount has written about recovery in mental health (approximately 60% of all articles). Whereas the first review focused on the peer-reviewed evidence; this paper specifically focuses on the grey/non-peer-reviewed literature. In total, our search strategy yielded the following: 3 books, a further 11 book chapters, 12 papers, 6 policy documents and 3 publications from voluntary sector organizations. Each group of publications was analysed for content, and they are discursively presented by publication group. The findings are then presented as themes in the discussion section. The themes are: social, historical and political critique; philosophy of hope for the individual; individual identity and narrative; models and guidance for mental health practice. We conclude that there is a need for both empirical research into recovery and a clearer theoretical exposition of the concept. © 2010 Blackwell Publishing.

  18. Determination on Whether Specialty Minerals Inc. Must be Included in the Simpson Paper Company Shasta Mill Application for a Title V Operating Permit as a Support Facility.

    Science.gov (United States)

    This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  19. The nutritional status and energy and protein intakes of MOW clients and the need for further targeted strategies to enhance intakes.

    Science.gov (United States)

    Walton, Karen; Charlton, Karen E; Manning, Fiona; McMahon, Anne T; Galea, Sarah; Evans, Kaitlyn

    2015-12-01

    There is a paucity of literature about the nutritional status and energy and protein intakes of Meals on Wheels (MOW) clients. The current study aimed to determine the nutritional status and the adequacy of energy and protein intakes of MOW clients. Forty-two clients were recruited from two MOW services in the Illawarra region of Australia for assessment of their nutritional status, using the Mini Nutritional Assessment (MNA(®)). Estimated energy and protein intakes for a MOW day were compared to a non-MOW day and average daily energy and protein intakes were assessed against estimated daily requirements. A single dietitian performed all assessments and home based interviews to explore the client's perception of the service. Mean daily energy intake (7593 (±2012) kJ) was not significantly different to estimated requirements (7720 (±975) kJ) (P = 0.480), while mean daily protein intake was higher (78.7 (±23.4) g) than calculated requirements (68.4 (±10.8) g; P = 0.009). However 16 clients were identified as at risk of malnutrition and 2 were malnourished; consuming 2072 kJ (P = 0.000) less energy and 20.4 g less protein (P = 0.004) per day compared to well-nourished clients. MOW clients are at risk of being poorly nourished and meals delivered by the service provide an important contribution to overall intakes. These findings support the need for regular nutrition screening and dietary monitoring in this high risk group, to identify those for whom additional strategies may be indicated. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. ESCo for mutual benefit and free energy saving. White paper 1. Including five cases and tips from experts; ESCo voor wederzijds voordeel en gratis energiebesparing. White paper 1. Inclusief vijf cases en experttips

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-01-15

    This white paper provides insight into the operation, options and restrictions of ESCo's (Energy Service Companies). The different variants of a relatively simple ESCo-product to an advanced ESCo-project are described and illustrated with examples from practice. Tips from experts can help with the assessment whether entering into a partnership with an ESCo is attractive enough [Dutch] Deze whitepaper geeft inzicht in de werking, mogelijkheden en beperkingen van ESCo's (Energy Service Companies). De verschillende varianten, van een relatief eenvoudige product-ESCo tot een geavanceerde project-ESCo worden beschreven en geillustreerd aan de hand van praktijkvoorbeelden. Tips van expert helpen met de inschatting of het aangaan van een samenwerkingsverband met een ESCo aantrekkelijk is.

  1. Exploring Paper.

    Science.gov (United States)

    Brand, Judith, Ed.

    1999-01-01

    Exploratorium Magazine communicates ideas that exhibits cannot easily demonstrate, extending the museum beyond its physical walls. This issue takes an in-depth look at the science and history of paper. Topics include: (1) Fascinating Facts about Paper; (2) A Closer Look at the Paper in This Magazine; (3) Handmade Paper; (4) Paper Airplanes; (5)…

  2. Promoting Pollinating Insects in Intensive Agricultural Matrices: Field-Scale Experimental Manipulation of Hay-Meadow Mowing Regimes and Its Effects on Bees

    Science.gov (United States)

    Buri, Pierrick; Humbert, Jean-Yves; Arlettaz, Raphaël

    2014-01-01

    Bees are a key component of biodiversity as they ensure a crucial ecosystem service: pollination. This ecosystem service is nowadays threatened, because bees suffer from agricultural intensification. Yet, bees rarely benefit from the measures established to promote biodiversity in farmland, such as agri-environment schemes (AES). We experimentally tested if the spatio-temporal modification of mowing regimes within extensively managed hay meadows, a widespread AES, can promote bees. We applied a randomized block design, replicated 12 times across the Swiss lowlands, that consisted of three different mowing treatments: 1) first cut not before 15 June (conventional regime for meadows within Swiss AES); 2) first cut not before 15 June, as treatment 1 but with 15% of area left uncut serving as a refuge; 3) first cut not before 15 July. Bees were collected with pan traps, twice during the vegetation season (before and after mowing). Wild bee abundance and species richness significantly increased in meadows where uncut refuges were left, in comparison to meadows without refuges: there was both an immediate (within year) and cumulative (from one year to the following) positive effect of the uncut refuge treatment. An immediate positive effect of delayed mowing was also evidenced in both wild bees and honey bees. Conventional AES could easily accommodate such a simple management prescription that promotes farmland biodiversity and is likely to enhance pollination services. PMID:24416434

  3. Promoting pollinating insects in intensive agricultural matrices: field-scale experimental manipulation of hay-meadow mowing regimes and its effects on bees.

    Science.gov (United States)

    Buri, Pierrick; Humbert, Jean-Yves; Arlettaz, Raphaël

    2014-01-01

    Bees are a key component of biodiversity as they ensure a crucial ecosystem service: pollination. This ecosystem service is nowadays threatened, because bees suffer from agricultural intensification. Yet, bees rarely benefit from the measures established to promote biodiversity in farmland, such as agri-environment schemes (AES). We experimentally tested if the spatio-temporal modification of mowing regimes within extensively managed hay meadows, a widespread AES, can promote bees. We applied a randomized block design, replicated 12 times across the Swiss lowlands, that consisted of three different mowing treatments: 1) first cut not before 15 June (conventional regime for meadows within Swiss AES); 2) first cut not before 15 June, as treatment 1 but with 15% of area left uncut serving as a refuge; 3) first cut not before 15 July. Bees were collected with pan traps, twice during the vegetation season (before and after mowing). Wild bee abundance and species richness significantly increased in meadows where uncut refuges were left, in comparison to meadows without refuges: there was both an immediate (within year) and cumulative (from one year to the following) positive effect of the uncut refuge treatment. An immediate positive effect of delayed mowing was also evidenced in both wild bees and honey bees. Conventional AES could easily accommodate such a simple management prescription that promotes farmland biodiversity and is likely to enhance pollination services.

  4. Promoting pollinating insects in intensive agricultural matrices: field-scale experimental manipulation of hay-meadow mowing regimes and its effects on bees.

    Directory of Open Access Journals (Sweden)

    Pierrick Buri

    Full Text Available Bees are a key component of biodiversity as they ensure a crucial ecosystem service: pollination. This ecosystem service is nowadays threatened, because bees suffer from agricultural intensification. Yet, bees rarely benefit from the measures established to promote biodiversity in farmland, such as agri-environment schemes (AES. We experimentally tested if the spatio-temporal modification of mowing regimes within extensively managed hay meadows, a widespread AES, can promote bees. We applied a randomized block design, replicated 12 times across the Swiss lowlands, that consisted of three different mowing treatments: 1 first cut not before 15 June (conventional regime for meadows within Swiss AES; 2 first cut not before 15 June, as treatment 1 but with 15% of area left uncut serving as a refuge; 3 first cut not before 15 July. Bees were collected with pan traps, twice during the vegetation season (before and after mowing. Wild bee abundance and species richness significantly increased in meadows where uncut refuges were left, in comparison to meadows without refuges: there was both an immediate (within year and cumulative (from one year to the following positive effect of the uncut refuge treatment. An immediate positive effect of delayed mowing was also evidenced in both wild bees and honey bees. Conventional AES could easily accommodate such a simple management prescription that promotes farmland biodiversity and is likely to enhance pollination services.

  5. PAPER ON MISCELLANEOUS ISSUES, INCLUDING WORKPLACE PRIVACY

    OpenAIRE

    Richards, G. W.

    2014-01-01

    EU directives give member states a certain period – say 2 or 3 years – to implement rules at national level. In fact the DPA 1998 replaces earlier UK legislation, the Data Protection Act 1984, so it does more than simply reproduce the directive. Other examples of subjects covered by directives are redundancy information/ consultation, equal treatment, insolvency protection, pregnancy protection, European and domestic works councils and agency work

  6. Linking Above- and Belowground Responses to 16 Years of Fertilization, Mowing, and Removal of the Dominant Species in a Temperate Grassland

    Czech Academy of Sciences Publication Activity Database

    Kotas, Petr; Chroma, M.; Šantrůčková, H.; Lepš, Jan; Tříska, Jan; Kaštovská, E.

    2017-01-01

    Roč. 20, č. 2 (2017), s. 354-367 ISSN 1432-9840 R&D Projects: GA ČR GA13-17118S Institutional support: RVO:67179843 ; RVO:60077344 Keywords : dominant removal * fertilization * grassland * microbial community structure * mowing * pH * PLFA Subject RIV: EH - Ecology, Behaviour; EG - Zoology (ENTU-I) OBOR OECD: Environmental sciences (social aspects to be 5.7); Entomology (ENTU-I) Impact factor: 4.198, year: 2016

  7. Challenges of establishing big sgebrush (Artemisia tridentata) in rangeland restoration: effects of herbicide, mowing, whole-community seeding, and sagebrush seed sources

    Science.gov (United States)

    Brabec, Martha M.; Germino, Matthew J.; Shinneman, Douglas J.; Pilliod, David S.; McIlroy, Susan K.; Arkle, Robert S.

    2015-01-01

    The loss of big sagebrush (Artemisia tridentata Nutt.) on sites disturbed by fire has motivated restoration seeding and planting efforts. However, the resulting sagebrush establishment is often lower than desired, especially in dry areas. Sagebrush establishment may be increased by addressing factors such as seed source and condition or management of the plant community. We assessed initial establishment of seeded sagebrush and four populations of small outplants (from different geographies, climates, and cytotypes) and small sagebrush outplants in an early seral community where mowing, herbicide, and seeding of other native plants had been experimentally applied. No emergence of seeded sagebrush was detected. Mowing the site before planting seedlings led to greater initial survival probabilities for sagebrush outplants, except where seeding also occurred, and these effects were related to corresponding changes in bare soil exposure. Initial survival probabilities were > 30% greater for the local population of big sagebrush relative to populations imported to the site from typical seed transfer distances of ~320–800 km. Overcoming the high first-year mortality of outplanted or seeded sagebrush is one of the most challenging aspects of postfire restoration and rehabilitation, and further evaluation of the impacts of herb treatments and sagebrush seed sources across different site types and years is needed.

  8. [Population dynamics of ground carabid beetles and spiders in a wheat field along the wheat-alfalfa interface and their response to alfalfa mowing].

    Science.gov (United States)

    Liu, Wen-Hui; Hu, Yi-Jun; Hu, Wen-Chao; Hong, Bo; Guan, Xiao-Qing; Ma, Shi-Yu; He, Da-Han

    2014-09-01

    Taking the wheat-alfalfa and wheat-wheat interfaces as model systems, sampling points were set by the method of pitfall trapping in the wheat field at the distances of 3 m, 6 m, 9 m, 12 m, 15 m, 18 m, 21 m, 24 m, and 27 m from the interface. The species composition and abundance of ground carabid beetles and spiders captured in pitfalls were investigated. The results showed that, to some extent there was an edge effect on species diversity and abundance of ground carabid beetles and spiders along the two interfaces. A marked edge effect was observed between 15 m and 18 m along the alfalfa-wheat interface, while no edge effect was found at a distance over 20 m. The edge effect along the wheat-wheat interface was weaker in comparison to the alfalfa-wheat interface. Alfalfa mowing resulted in the migration of a large number of ground carabid beetles and spiders to the adjacent wheat filed. During ten days since mowing, both species and abundance of ground carabid beetles and spiders increased in wheat filed within the distance of 20 m along the alfalfa-wheat interface. The spatial distribution of species diversity of ground beetles and spiders, together with the population abundance of the dominant Chlaenius pallipes and Pardosa astrigera, were depicted, which could directly indicate the migrating process of natural enemy from alfalfa to wheat field.

  9. Including Ideology

    Science.gov (United States)

    Allan, Julie

    2013-01-01

    Ellen Brantlinger's paper, "Using ideology: cases of non-recognition of the politics of research and practice in special education" (Brantlinger, E. 1997. "Using ideology: Cases of nonrecognition of the politics of research and practice in special education." "Review of Educational Research" 67, no. 4: 425-59),…

  10. The Spatial Pattern and Interactions of Woody Plants on the Temperate Savanna of Inner Mongolia, China: The Effects of Alternating Seasonal Grazing-Mowing Regimes.

    Directory of Open Access Journals (Sweden)

    Xiao Wang

    Full Text Available Ulmus pumila tree-dominated temperate savanna, which is distributed widely throughout the forest-steppe ecotone on the Mongolian Plateau, is a relatively stable woody-herbaceous complex ecosystem in northern China. Relatively more attention has been paid to the degradation of typical steppe areas, whereas less focus has been placed on the succession of this typical temperate savanna under the present management regime. In this study, we established 3 sample plots 100 m×100 m in size along a gradient of fixed distances from one herder's stationary site and then surveyed all the woody plants in these plots. A spatial point pattern analysis was employed to clarify the spatial distribution and interaction of these woody plants. The results indicated that old U. pumila trees (DBH ≥ 20 cm showed a random distribution and that medium U. pumila trees (5 cm ≤ DBH < 20 cm showed an aggregated distribution at a smaller scale and a random distribution at a larger scale; few or no juvenile trees (DBH < 5 cm were present, and seedlings (without DBH formed aggregations in all 3 plots. These findings can be explained by an alternate seasonal grazing-mowing regime (exclosure in summer, mowing in autumn and grazing in winter and spring; the shrubs in all 3 plots exist along a grazing gradient that harbors xerophytic and mesophytic shrubs. Of these shrubs, xerophytic shrubs show significant aggregation at a smaller scale (0-5.5 m, whereas mesophytic shrubs show significant aggregation at a larger scale (0-25 m, which may be the result of the dual effects of grazing pressure and climate change. Medium trees and seedlings significantly facilitate the distributions of xerophytic shrubs and compete significantly with mesophytic shrubs due to differences in water use strategies. We conclude that the implementation of an alternative grazing-mowing regime results in xerophytic shrub encroachment or existence, breaking the chain of normal succession in a U. pumila

  11. Redox dependent behaviour of molybdenum during magmatic processes in the terrestrial and lunar mantle: Implications for the Mo/W of the bulk silicate Moon

    Science.gov (United States)

    Leitzke, F. P.; Fonseca, R. O. C.; Sprung, P.; Mallmann, G.; Lagos, M.; Michely, L. T.; Münker, C.

    2017-09-01

    We present results of high-temperature olivine-melt, pyroxene-melt and plagioclase-melt partitioning experiments aimed at investigating the redox transition of Mo in silicate systems. Data for a series of other minor and trace elements (Sc, Ba, Sr, Cr, REE, Y, HFSE, U, Th and W) were also acquired to constrain the incorporation of Mo in silicate minerals. All experiments were carried out in vertical tube furnaces at 1 bar and temperatures ranging from ca. 1220 to 1300 °C. Oxygen fugacity was controlled via CO-CO2 gas mixtures and varied systematically from 5.5 log units below to 1.9 log units above the fayalite-magnetite-quartz (FMQ) redox buffer thereby covering the range in oxygen fugacities of terrestrial and lunar basalt genesis. Molybdenum is shown to be volatile at oxygen fugacities above FMQ and that its compatibility in pyroxene and olivine increases three orders of magnitude towards the more reducing conditions covered in this study. The partitioning results show that Mo is dominantly tetravalent at redox conditions below FMQ-4 and dominantly hexavalent at redox conditions above FMQ. Given the differences in oxidation states of the terrestrial (oxidized) and lunar (reduced) mantles, molybdenum will behave significantly differently during basalt genesis in the Earth (i.e. highly incompatible; average DMoperidotite/melt ∼ 0.008) and Moon (i.e. moderately incompatible/compatible; average DMoperidotite/melt ∼ 0.6). Thus, it is expected that Mo will strongly fractionate from W during partial melting in the lunar mantle, given that W is broadly incompatible at FMQ-5. Moreover, the depletion of Mo and the Mo/W range in lunar samples can be reproduced by simply assuming a primitive Earth-like Mo/W for the bulk silicate Moon. Such a lunar composition is in striking agreement with the Moon being derived from the primitive terrestrial mantle after core formation on Earth.

  12. Audio Papers

    DEFF Research Database (Denmark)

    Groth, Sanne Krogh; Samson, Kristine

    2016-01-01

    With this special issue of Seismograf we are happy to present a new format of articles: Audio Papers. Audio papers resemble the regular essay or the academic text in that they deal with a certain topic of interest, but presented in the form of an audio production. The audio paper is an extension...

  13. Paper electronics.

    Science.gov (United States)

    Tobjörk, Daniel; Österbacka, Ronald

    2011-05-03

    Paper is ubiquitous in everyday life and a truly low-cost substrate. The use of paper substrates could be extended even further, if electronic applications would be applied next to or below the printed graphics. However, applying electronics on paper is challenging. The paper surface is not only very rough compared to plastics, but is also porous. While this is detrimental for most electronic devices manufactured directly onto paper substrates, there are also approaches that are compatible with the rough and absorptive paper surface. In this review, recent advances and possibilities of these approaches are evaluated and the limitations of paper electronics are discussed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Conference Papers

    International Nuclear Information System (INIS)

    2003-01-01

    A total of 18 papers were presented at the 2003 Annual Executive Conference of the Canadian Gas Association held at St. Andrews, NB, from June 25th to June 28th. Titles of the presentations were as follows: (1) 'Positioning natural gas in a transforming world' by Pierre Marcel Desjardins; (2) 'Positioning natural gas in a transforming world' by Jean-Paul Theoret; (3) 'Perceptions of natural gas' by Noel Sampson; (4) 'Energy efficiency as an opportunity for the natural gas industry' by Peter Love; (5) 'Natural gas R and D - NRCan perspective' by Graham R. Campbell; (6) 'Impact of earned media on corporate perceptions in the gas industry' by Michael Coates; (7) 'Moving forward with an initiative for natural gas technology innovation' by Emmanuel Morin; (8) 'Natural gas R and D - No more dodging the issue' by Chuck Szmurlo; (9) 'Meeting the technology needs of the gas industry and the gas consumer' by Stanley S. Borys; (10) 'Market signals' by John Wellard; (11) 'Future sources of Canadian natural gas' by Rick Hyndman; (12) 'The state of supply: Northeast U.S. perspective' by Tom Kiley; (13) 'AGA's priorities and perspectives' by Dick Reiten; (14) 'Global energy issues: Recent development in policy and business' by Gerald Doucet; (15) 'Keeping the distribution cart behind the horse: Why finding more offshore gas is much more important than completing the natural gas grid, including for New Brunswick' by Brian Lee Crowley; (16) 'Environmental opportunities and challenges for the gas industry' by Manfred Klein; (17) 'The potential for natural gas demand destruction' by Timothy Partridge; and (18) 'Pushing the envelope on gas supply' by Roland R. George. In most instances only speaking notes and view graphs are available

  15. Paper Cuts.

    Science.gov (United States)

    Greene, Lisa A.

    1990-01-01

    Describes how to create paper cuts and suggests the most appropriate materials for young children that give good quality results. Describes the methods the author, a professional artist, uses to assemble her own paper cuts and how these can be adopted by older students. (KM)

  16. Summary of papers included within this commemorative issue

    Czech Academy of Sciences Publication Activity Database

    Roček, Zbyněk

    2016-01-01

    Roč. 72, 1/2 (2016), s. 15-16 ISSN 2533-4050 Institutional support: RVO:67985831 Keywords : paleontology * summmary Subject RIV: DB - Geology ; Mineralogy http://www.nm.cz/publikace/archiv-en.php?id=4&rok=72&kcislu=1-2&f_=Show

  17. Panama Papers

    DEFF Research Database (Denmark)

    Harrington, Brooke

    2016-01-01

    Mossack Fonseca kept its clients largely on the right side of the law. Indeed, that’s entirely the point. This article for The Atlantic draws on my wealth management research to explain why most of what is revealed in the Panama Papers leak will not result in criminal prosecution for anyone...

  18. Philosophical Papers

    African Journals Online (AJOL)

    In this paper, however, I argue for a different kind of approach, one which holds that there is a useful distinction to be drawn between the metaphysical and epistemological aspects of singular terms. This approach not only avoids the problems faced by alternative accounts but also coheres well with how ordinary speakers ...

  19. Philosophical Papers

    African Journals Online (AJOL)

    Philosophical Papers is a generalist journal of philosophy edited in the Department of Philosophy at Rhodes University. The journal appears three times a year; the November issue of every year is topic-based and guest-edited. The journal is published by Routledge (Taylor & Francis). Information regarding submissions ...

  20. Philosophical Papers

    African Journals Online (AJOL)

    The other minds skeptic supposes there may be no minds other than his. The external world skeptic thinks there could be no world external to him. Some philosophers think a person can refute the skeptic and prove that his world is not the solitary scenario the skeptic supposes his could be. In this paper I examine one ...

  1. Sizewell papers

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    A collection of papers, previously published in the New Scientist between September 1980 and January 1983, dealing with the pressurised water reactor and in particular the proposal by CEGB to build a PWR at Sizewell, Suffolk, is presented. The individual papers are entitled: American reactors are wrong for Britain; Britain's first pressurised-water reactor; a test bed for nuclear safety; the pressure on nuclear safety; Suffolk - a soft touch for PWRs; why Britain needs a PWR; critical time for Sizewell's reactor; why Britain does not need a PWR; a reactor designed for Sizewell; a case not proven; lessons from Three Mile Island; how France went nuclear; an environmentalist's case for the Sizewell PWR. (U.K.)

  2. Research Paper

    African Journals Online (AJOL)

    Prof. Adewunmi

    (India). A total of 150 healthcare-associated (HA) sources (doctors mobiles ... including endocarditis, osteomyelitis, toxic-shock syndrome, pneumonia, ... These infections can occur in wounds or skin, burns and IV or other sites where tubes.

  3. Thermopressure hydrolysis. Paper; Thermodruckhydrolyse. Paper

    Energy Technology Data Exchange (ETDEWEB)

    Stahl, R. [Scheuchl GmbH, Ortenburg (Germany); Prechtl, S. [Applikations- und Technikzentrum fuer Energieverfahrens-, Umwelt- und Stroemungstechnik (ATZ-EVUS), Sulzbach-Rosenberg (Germany)

    2000-12-01

    This paper presents a processing method which consists in thermal hydrolysis and subsequent anaerobic fermentation and is especially well suited for wet, low-structure organic wastes. [German] Das vorgestellte Verwertungsverfahren bestehend aus thermischer Hydrolyse und anschliessender anaerober Vergaerung eignet sich besonders fuer nasse, strukturarme organische Abfaelle. (orig.)

  4. Synthesis and characterization of carboxymethyl cellulose from office waste paper: A greener approach towards waste management

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, Gyanesh, E-mail: joshig@icfre.org [Cellulose and Paper Division, Forest Research Institute, Dehradun 248006 (India); Naithani, Sanjay [Chemistry of Forest Products Division, Institute of Wood Science & Technology, Bangalore 560003 (India); Varshney, V.K. [Chemistry Division, Forest Research Institute, Dehradun 248006 (India); Bisht, Surendra S. [Chemistry of Forest Products Division, Institute of Wood Science & Technology, Bangalore 560003 (India); Rana, Vikas; Gupta, P.K. [Cellulose and Paper Division, Forest Research Institute, Dehradun 248006 (India)

    2015-04-15

    Highlights: • Carboxymethyl cellulose (CMC) was successfully prepared from waste paper. • CMC had maximum degree of substitution (DS) 1.07. • Rheological studies of CMC (DS, 1.07) showed non-Newtonian pseudoplastic behavior. • Characterization of CMC was done by FT-IR and NMR techniques. • Morphology of prepared CMC was studied by SEM. - Abstract: In the present study, functionalization of mixed office waste (MOW) paper has been carried out to synthesize carboxymethyl cellulose, a most widely used product for various applications. MOW was pulped and deinked prior to carboxymethylation. The deinked pulp yield was 80.62 ± 2.0% with 72.30 ± 1.50% deinkability factor. The deinked pulp was converted to CMC by alkalization followed by etherification using NaOH and ClCH{sub 2}COONa respectively, in an alcoholic medium. Maximum degree of substitution (DS) (1.07) of prepared CMC was achieved at 50 °C with 0.094 M and 0.108 M concentrations of NaOH and ClCH{sub 2}COONa respectively for 3 h reaction time. The rheological characteristics of 1–3% aqueous solution of optimized CMC product showed the non-Newtonian pseudoplastic behavior. Fourier transform infra red (FTIR), nuclear magnetic resonance (NMR) and scanning electron microscope (SEM) study were used to characterize the CMC product.

  5. Synthesis and characterization of carboxymethyl cellulose from office waste paper: A greener approach towards waste management

    International Nuclear Information System (INIS)

    Joshi, Gyanesh; Naithani, Sanjay; Varshney, V.K.; Bisht, Surendra S.; Rana, Vikas; Gupta, P.K.

    2015-01-01

    Highlights: • Carboxymethyl cellulose (CMC) was successfully prepared from waste paper. • CMC had maximum degree of substitution (DS) 1.07. • Rheological studies of CMC (DS, 1.07) showed non-Newtonian pseudoplastic behavior. • Characterization of CMC was done by FT-IR and NMR techniques. • Morphology of prepared CMC was studied by SEM. - Abstract: In the present study, functionalization of mixed office waste (MOW) paper has been carried out to synthesize carboxymethyl cellulose, a most widely used product for various applications. MOW was pulped and deinked prior to carboxymethylation. The deinked pulp yield was 80.62 ± 2.0% with 72.30 ± 1.50% deinkability factor. The deinked pulp was converted to CMC by alkalization followed by etherification using NaOH and ClCH 2 COONa respectively, in an alcoholic medium. Maximum degree of substitution (DS) (1.07) of prepared CMC was achieved at 50 °C with 0.094 M and 0.108 M concentrations of NaOH and ClCH 2 COONa respectively for 3 h reaction time. The rheological characteristics of 1–3% aqueous solution of optimized CMC product showed the non-Newtonian pseudoplastic behavior. Fourier transform infra red (FTIR), nuclear magnetic resonance (NMR) and scanning electron microscope (SEM) study were used to characterize the CMC product

  6. Selected papers

    CERN Document Server

    Elgot, Calvin C

    1982-01-01

    Cal Elgot was a very serious and thoughtful researcher, who with great determi­ nation attempted to find basic explanations for certain mathematical phenomena­ as the selection of papers in this volume well illustrate. His approach was, for the most part, rather finitist and constructivist, and he was inevitably drawn to studies of the process of computation. It seems to me that his early work on decision problems relating automata and logic, starting with his thesis under Roger Lyndon and continuing with joint work with Biichi, Wright, Copi, Rutledge, Mezei, and then later with Rabin, set the stage for his attack on the theory of computation through the abstract treatment of the notion of a machine. This is also apparent in his joint work with A. Robinson reproduced here and in his joint papers with John Shepherdson. Of course in the light of subsequent work on decision problems by Biichi, Rabin, Shelah, and many, many others, the subject has been placed on a completely different plane from what it was whe...

  7. Synthesis and characterization of carboxymethyl cellulose from office waste paper: a greener approach towards waste management.

    Science.gov (United States)

    Joshi, Gyanesh; Naithani, Sanjay; Varshney, V K; Bisht, Surendra S; Rana, Vikas; Gupta, P K

    2015-04-01

    In the present study, functionalization of mixed office waste (MOW) paper has been carried out to synthesize carboxymethyl cellulose, a most widely used product for various applications. MOW was pulped and deinked prior to carboxymethylation. The deinked pulp yield was 80.62 ± 2.0% with 72.30 ± 1.50% deinkability factor. The deinked pulp was converted to CMC by alkalization followed by etherification using NaOH and ClCH2COONa respectively, in an alcoholic medium. Maximum degree of substitution (DS) (1.07) of prepared CMC was achieved at 50 °C with 0.094 M and 0.108 M concentrations of NaOH and ClCH2COONa respectively for 3h reaction time. The rheological characteristics of 1-3% aqueous solution of optimized CMC product showed the non-Newtonian pseudoplastic behavior. Fourier transform infra red (FTIR), nuclear magnetic resonance (NMR) and scanning electron microscope (SEM) study were used to characterize the CMC product. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. MowA®: A simple and economic way of monitoring chronic wounds outcome with your mobile devices.

    Science.gov (United States)

    Ciancio, Francesco; Portincasa, Aurelio; Parisi, Domenico; Innocenti, Alessandro

    2017-01-01

    suspicion of infection, bleeding and the depth of the lesion. The application also offers a treatment algorithm based in the data entered and follows the EPUAP and NPUAP guidelines 7. Once the assessment of chronic skin lesion takes place, it is possible to produce a PDF or JPEG file with photography and the characteristics of the wound.The producted files can be shared via email. The use of this simple application is of interest to those surgeons who want a quick way to evaluate in size and percentage skin ulcers. The ability to store and search Ptients data in a fast and practice way is the strongest point of this application. Through this application you can monitor and compare both size and outcome of chronic wound over time, When using the applicatiom, if you want, there is need to include any sensitive information relates to the patients, No author has economic interest and financed by the the advertising of this application.

  9. Wood and Paper Manufacturing Sectors

    Science.gov (United States)

    Find EPA regulatory information for the wood product and paper manufacturing sectors, including paper, pulp and lumber. Information includes NESHAPs and effluent guidelines for pulp and paper rulemaking, and compliance guidelines

  10. Original Research Paper

    OpenAIRE

    Allahverdi, Novruz

    2014-01-01

    This paper is the survey of studies that include design processes of some fuzzy expert systems for applications in some medical area. Recent studies of us that include fuzzy expert systems that make use of fuzzy logic method were described. Some of fuzzy expert systems mentioned in this paper have been developed as first time. Followings were investigated; the risk of prostate cancer, risk of coronary heart disease, degree of child anemia, determination the level of iron deficiency anemia, di...

  11. Paper based electronics platform

    KAUST Repository

    Nassar, Joanna Mohammad

    2017-07-20

    A flexible and non-functionalized low cost paper-based electronic system platform fabricated from common paper, such as paper based sensors, and methods of producing paper based sensors, and methods of sensing using the paper based sensors are provided. A method of producing a paper based sensor can include the steps of: a) providing a conventional paper product to serve as a substrate for the sensor or as an active material for the sensor or both, the paper product not further treated or functionalized; and b) applying a sensing element to the paper substrate, the sensing element selected from the group consisting of a conductive material, the conductive material providing contacts and interconnects, sensitive material film that exhibits sensitivity to pH levels, a compressible and/or porous material disposed between a pair of opposed conductive elements, or a combination of two of more said sensing elements. The method of sensing can further include measuring, using the sensing element, a change in resistance, a change in voltage, a change in current, a change in capacitance, or a combination of any two or more thereof.

  12. Radiation effects and tritium technology for fusion reactors. Volume I. Proceedings of the international conference, Gatlinburg, Tennessee, October 1--3, 1975

    Energy Technology Data Exchange (ETDEWEB)

    Watson, J.S.; Wiffen, F.W.; Bishop, J.L.; Breeden, B.K. (eds.)

    1976-03-01

    Separate abstracts were prepared for the 29 included papers in Vol. I. The topics covered in this volume include swelling and microstructures in thermonuclear reactor materials. Some papers on modeling and damage analysis are included. (MOW)

  13. Other relevant biological papers

    International Nuclear Information System (INIS)

    Shimizu, M.

    1989-01-01

    A considerable number of CRESP-relevant papers concerning deep-sea biology and radioecology have been published. It is the purpose of this study to call attention to them. They fall into three general categories. The first is papers of general interest. They are mentioned only briefly, and include text references to the global bibliography at the end of the volume. The second are papers that are not only mentioned and referenced, but for various reasons are described in abstract form. The last is a list of papers compiled by H.S.J. Roe specifically for this volume. They are listed in bibliographic form, and are also included in the global bibliography at the end of the volume

  14. Deformable paper origami optoelectronic devices

    KAUST Repository

    He, Jr-Hau; Lin, Chun-Ho

    2017-01-01

    Deformable optoelectronic devices are provided, including photodetectors, photodiodes, and photovoltaic cells. The devices can be made on a variety of paper substrates, and can include a plurality of fold segments in the paper substrate creating a

  15. Ultrathin metallized PBI paper

    Science.gov (United States)

    Chenevey, E. C.

    1978-01-01

    A study to determine the feasibility of preparing ultrathin papers with a target weight of 3.5 g/m squared from polybenzimidazole (PBI) fibrids was undertaken. Small hand sheets of target weight were fabricated. They were light brown, low density materials with sufficient strength to be readily handleable. Characterization of these sheets included strength, fold endurance, thermal gravimetric analysis in air and nitrogen and photomicrographs. Two different batches of PBI fibrids were studied and differences in fabrication performance were noted. In neither case could target weight papers be prepared using conventional paper making techniques.

  16. Proceedings of the international conference on radiation test facilities for the CTR surface and materials program, Argonne, Illinois, July 15--18, 1975

    Energy Technology Data Exchange (ETDEWEB)

    1975-01-01

    Separate abstracts were prepared for the 42 included papers. Abstracts for all 42 papers appear in Nuclear Science Abstracts while abstracts for 32 of the papers appear in ERDA Research Abstracts. (MOW)

  17. Philosophical Papers: Submissions

    African Journals Online (AJOL)

    Articles should be relevant to the analytic tradition in philosophy, understood broadly and including critiques of that tradition. All submissions are independently refereed. In most cases, decisions are based on reports from at least two referees. Final editorial decisions are made by the Editorial Board of Philosophical Papers.

  18. Regional Activities Division. Papers.

    Science.gov (United States)

    International Federation of Library Associations, The Hague (Netherlands).

    Papers on library network activities in Canada, the Third World, Japan, Malaysia, Brazil, and Sweden which were presented at the 1982 International Federation of Library Associations (IFLA) conference include: (1) "Canada: A Voluntary and Flexible Network," a review by Guy Sylvestre of the political, social, and economic structures…

  19. 1982 Australian coal conference papers

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    This third Australian coal conference included papers discussing the market for coal, finance and investment, use of computers, mining, coal research, coal preparation and waste disposal, marketing and trade, and the transport of coal. All papers have been individually abstracted.

  20. Grays Harbor Paper

    Energy Technology Data Exchange (ETDEWEB)

    Quigg, B. [Grays Harbor Paper, Hoquiam, WA (United States)

    2009-07-01

    Wood waste biomass boilers are used at Grays Harbor Paper in Hoquiam, Washington. This presentation showed that large volumes of biomass are left after a traditional clearcut. The opportunities and challenges of collecting branches, tops and stumps from this wet coastal climate were outlined. The paper described some of the low-tech methods for picking up branches, stumps and woody debris. It included several photographs of custom logging machines for timber harvest, including a brush grapple slasher, a shearer shovel, chippers, grinders, slicesaws, trucks, trailers and caterpillar log loaders for handling slash. The slash recovery program relies on innovative harvesting machines that convert scattered logging slash into bundles that can be easily collected, transported, and stored for use in existing facilities that utilize wood fiber for fuel. figs.

  1. Nanotechnology in paper electronics

    Science.gov (United States)

    Demming, Anna; Österbacka, Professor Ronald; Han, Jin-Woo, Dr

    2014-03-01

    The ability to put cutting edge technology on paper—not in words but in a working physical form—has been attracting an increasing number of researchers over the past decade. Paper has many advantages that make it attractive for flexible electronics: it is relatively environmentally benign; it is renewable; it can be recycled; it is light weight; production processes for paper are well advanced; and it is inexpensive. This special issue, with guest editors Ronald Österbacka from Åbo Akademi University in Finland and Jin-Woo Han from the NASA AMES Research Center, features some of the latest in paper electronics research, including developments towards applications in displays, sensing and alternative energy sources, as well as fundamental studies to further our understanding of how paper can be most effectively used in electronics. As Andrew Steckl and colleagues in the US point out, 'Cellulose-based paper substrates were implemented as an electronic substrate as early as 1969, with most advancement occurring in the past decade largely due to technology improvements in thin film deposition and organic materials' [1, 2]. They report a detailed comparison between paper, standard liquid crystal display rigid glass and flexible glass for hosting pentacene organic thin film transistors, and obtain promising results for future paper-based devices. As most meaningful electronic devices rely on transistors to function, transistors feature quite prominently in this special issue. Rodrigo Martins and colleagues in France and Portugal study the effect of fibre type, structure and dimension on paper-based transistors and reveal further insights into how paper properties affect device performance [3]. Qing Wan and colleagues in China bring the state of the art in transistor technology to paper substrates [4], fabricating indium-zinc-oxide (IZO)-based protonic/electronic hybrid thin film transistors on paper and showing that they can be used as artificial synapses. Like the

  2. Paper based electronics platform

    KAUST Repository

    Nassar, Joanna Mohammad; Sevilla, Galo Andres Torres; Hussain, Muhammad Mustafa

    2017-01-01

    A flexible and non-functionalized low cost paper-based electronic system platform fabricated from common paper, such as paper based sensors, and methods of producing paper based sensors, and methods of sensing using the paper based sensors

  3. Asian-Pacific Papers. Occasional Papers Number 10.

    Science.gov (United States)

    McCarthy, Brian, Ed.

    Sixteen papers are presented. Topics covered include language teaching, discourse analysis, code switching, phonetics, language and cultural identity, and descriptive and comparative studies. All presenters were from the Asia-Pacific area of the world. Papers include: "The Baba Malay Lexicon: Hokkien Loanwords in Baba Malay" (Anne…

  4. ILC Higgs White Paper

    CERN Document Server

    Asner, D.M.; Calancha, C.; Fujii, K.; Graf, N.; Haber, H.E.; Ishikawa, A.; Kanemura, S.; Kawada, S.; Kurata, M.; Miyamoto, A.; Neal, H.; Ono, H.; Potter, C.; Strube, J.; Suehara, T.; Tanabe, T.; Tian, J.; Tsumura, J.; Watanuki, S.; Weiglein, G.; Yagyu, K.; Yokoya, H.

    2013-01-01

    The ILC Higgs White Paper is a review of Higgs Boson theory and experiment at the International Linear Collider (ILC). Theory topics include the Standard Model Higgs, the two-Higgs doublet model, alternative approaches to electroweak symmetry breaking, and precision goals for Higgs boson experiments. Experimental topics include the measurement of the Higgs cross section times branching ratio for various Higgs decay modes at ILC center of mass energies of 250, 500, and 1000 GeV, and the extraction of Higgs couplings and the total Higgs width from these measurements. Luminosity scenarios based on the ILC TDR machine design are used throughout. The gamma-gamma collider option at the ILC is also discussed.

  5. New seismograph includes filters

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-02

    The new Nimbus ES-1210 multichannel signal enhancement seismograph from EG and G geometrics has recently been redesigned to include multimode signal fillers on each amplifier. The ES-1210F is a shallow exploration seismograph for near subsurface exploration such as in depth-to-bedrock, geological hazard location, mineral exploration, and landslide investigations.

  6. Analytic device including nanostructures

    KAUST Repository

    Di Fabrizio, Enzo M.; Fratalocchi, Andrea; Totero Gongora, Juan Sebastian; Coluccio, Maria Laura; Candeloro, Patrizio; Cuda, Gianni

    2015-01-01

    A device for detecting an analyte in a sample comprising: an array including a plurality of pixels, each pixel including a nanochain comprising: a first nanostructure, a second nanostructure, and a third nanostructure, wherein size of the first nanostructure is larger than that of the second nanostructure, and size of the second nanostructure is larger than that of the third nanostructure, and wherein the first nanostructure, the second nanostructure, and the third nanostructure are positioned on a substrate such that when the nanochain is excited by an energy, an optical field between the second nanostructure and the third nanostructure is stronger than an optical field between the first nanostructure and the second nanostructure, wherein the array is configured to receive a sample; and a detector arranged to collect spectral data from a plurality of pixels of the array.

  7. Saskatchewan resources. [including uranium

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    The production of chemicals and minerals for the chemical industry in Saskatchewan are featured, with some discussion of resource taxation. The commodities mentioned include potash, fatty amines, uranium, heavy oil, sodium sulfate, chlorine, sodium hydroxide, sodium chlorate and bentonite. Following the successful outcome of the Cluff Lake inquiry, the uranium industry is booming. Some developments and production figures for Gulf Minerals, Amok, Cenex and Eldorado are mentioned.

  8. INTRODUCTION Summary of Papers Summary of Papers

    Science.gov (United States)

    Gauthier, Serge; Abarzhi, Snezhana I.; Sreenivasan, Katepalli R.

    2010-12-01

    review various aspects of Turbulent Mixing that were discussed at the Second International Conference and Advanced School 'Turbulent Mixing and Beyond', TMB-2009, held in summer 2009 at the Abdus Salam International Centre for Theoretical Physics (ICTP), Trieste, Italy. The papers are arranged by TMB themes and within each theme they are ordered alphabetically by the last name of the first author, with tutorials following research contributions. Canonical turbulence and turbulent mixing. The theme of canonical turbulence and turbulent mixing is considered by several authors. Casciola et al investigate the dynamics of inertial particles dispersed in a turbulent jet and compare their numerical modeling results with the classical similarity theory of the jet far-field. Remarkable agreement is found between the theory and the direct numerical simulations (DNS), including decay of Stokes numbers with the distance from the origin, self-similarity of the mean axial particle velocity profile, etc. Nagata considers complex turbulent flows, which are known to exhibit no linear critical point for the laminar states, and which are linearly stable at finite Reynolds numbers. Square duct flow and sliding Couette flow in an annulus are considered and nonlinear traveling-wave states are found for the flows with the use of the homotopy approach developed by the author. These states may constitute a skeleton around which a time-dependent trajectory in the phase space is organized. Teitelbaum and Mininni study a decaying 3D incompressible turbulence, which mimicks turbulent mixing in geophysical flows, with rotation rendering the flow anisotropic at large scales. The authors analyze three DNS results (without and with rotation, and with helicity), observe a decoupling of the modes normal to the rotation axis, and show that the helicity decreases the decay rate of turbulence. Wang and Peters investigate the structure of turbulence by studying strain rates of various scalars, including a

  9. List of working papers

    International Nuclear Information System (INIS)

    2001-01-01

    The following working papers are included in this report. The other papers, or the memos of which they consist, are available from the IAEA Nuclear Data Section. WP2001-2 Inventory of TRANS files exchanged since the last meeting; WP2001-4 Data headings and units for wavelength and kT; WP2001-6 Proposed Polarization Quantities; WP2001-7 Correlation / Angular correlation: Clarifications and dictionary cleanup; WP2001-8 Proposed quantity PAR/M-,DA,G; WP2001-14 Units N/PART/SR etc. for Dict. 25; WP2001-15 Coding of differential neutron multiplicity distributions; WP2001-16 Headings E-LVL-INI, E-LVL-FIN as 'additional information'; WP2001-17 Dictionary sorting flags and wildcards; WP2001-18 IAEA/NDS priorities in the EXFOR compilation; WP2001-21 CSISRS Library Statistics (NNDC); WP2001-23 CINDA-2001 Manual (24 May 2001); WP2001-24 Correspondence of quantity codes for CINDA-2001; WP2001-25 EXFOR as a multi-platform relational database: current status of development; WP2001-26 Compilation and Evaluation of Alpha-Induced Nuclear Reaction Cross Sections for Astrophysics; WP2001-28 Journal coverage for CINDA

  10. List of working papers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The following working papers are included in this report. The other papers, or the memos of which they consist, are available from the IAEA Nuclear Data Section. WP2001-2 Inventory of TRANS files exchanged since the last meeting; WP2001-4 Data headings and units for wavelength and kT; WP2001-6 Proposed Polarization Quantities; WP2001-7 Correlation / Angular correlation: Clarifications and dictionary cleanup; WP2001-8 Proposed quantity PAR/M-,DA,G; WP2001-14 Units N/PART/SR etc. for Dict. 25; WP2001-15 Coding of differential neutron multiplicity distributions; WP2001-16 Headings E-LVL-INI, E-LVL-FIN as 'additional information'; WP2001-17 Dictionary sorting flags and wildcards; WP2001-18 IAEA/NDS priorities in the EXFOR compilation; WP2001-21 CSISRS Library Statistics (NNDC); WP2001-23 CINDA-2001 Manual (24 May 2001); WP2001-24 Correspondence of quantity codes for CINDA-2001; WP2001-25 EXFOR as a multi-platform relational database: current status of development; WP2001-26 Compilation and Evaluation of Alpha-Induced Nuclear Reaction Cross Sections for Astrophysics; WP2001-28 Journal coverage for CINDA.

  11. Being Included and Excluded

    DEFF Research Database (Denmark)

    Korzenevica, Marina

    2016-01-01

    Following the civil war of 1996–2006, there was a dramatic increase in the labor mobility of young men and the inclusion of young women in formal education, which led to the transformation of the political landscape of rural Nepal. Mobility and schooling represent a level of prestige that rural...... politics. It analyzes how formal education and mobility either challenge or reinforce traditional gendered norms which dictate a lowly position for young married women in the household and their absence from community politics. The article concludes that women are simultaneously excluded and included from...... community politics. On the one hand, their mobility and decision-making powers decrease with the increase in the labor mobility of men and their newly gained education is politically devalued when compared to the informal education that men gain through mobility, but on the other hand, schooling strengthens...

  12. Paper on Designing Costless THz Paper Optics

    Directory of Open Access Journals (Sweden)

    A. Siemion

    2016-01-01

    Full Text Available Designing diffractive optical elements is crucial for efficient development of THz techniques. Here, we consider paper structures and we analyze their advantages and disadvantages in fast prototyping. The discussion about using material parameters like refractive index and absorption coefficient in designing diffractive optical elements is shown. We analyze the influence of phase step mismatch, of attenuation of real structure, and of nonuniform illumination on the efficiency of the structure. All these features result in worsening of the diffraction efficiency but they do not seem to have such significant influence as shadow effect introduced by fast varying zones. Diffractive elements can be designed with very good accordance with experimental results which makes them ideal for possible applications. Paper optics scan be used more for fast prototyping; nevertheless its performance can be increased by placing it inside water protecting foil.

  13. Corrosion/96 conference papers

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    Topics covered by this conference include: cathodic protection in natural waters; cleaning and repassivation of building HVAC systems; worldwide opportunities in flue gas desulfurization; advancements in materials technology for use in oil and gas service; fossil fuel combustion and conversion; technology of corrosion inhibitors; computers in corrosion control--modeling and information processing; recent experiences and advances of austenitic alloys; managing corrosion with plastics; corrosion measurement technology; corrosion inhibitors for concrete; refining industry; advances in corrosion control for rail and tank trailer equipment; CO 2 corrosion--mechanisms and control; microbiologically influenced corrosion; corrosion in nuclear systems; role of corrosion in boiler failures; effects of water reuse on monitoring and control technology in cooling water applications; methods and mechanisms of scale and deposit control; corrosion detection in petroleum production lines; underground corrosion control; environmental cracking--relating laboratory results and field behavior; corrosion control in reinforced concrete structures; corrosion and its control in aerospace and military hardware; injection and process addition facilities; progress reports on the results of reinspection of deaerators inspected or repaired per RP0590 criteria; near 100% volume solids coating technology and application methods; materials performance in high temperature environments containing halides; impact of toxicity studies on use of corrosion/scale inhibitors; mineral scale deposit control in oilfield related operations; corrosion in gas treating; marine corrosion; cold climate corrosion; corrosion in the pulp and paper industry; gaseous chlorine alternatives in cooling water systems; practical applications of ozone in recirculating cooling water systems; and water reuse in industry. Over 400 papers from this conference have been processed separately for inclusion on the data base

  14. CEM 2009. Conference papers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Papers are presented under the following session headings: emission factors and inventories; certifications and accreditation; PM10/2.5; advanced techniques; and QA/QC. Some of the papers are only the overheads/viewgraphs of the presentation.

  15. Radioactivity in fine papers

    International Nuclear Information System (INIS)

    Taylor, H.W.; Singh, B.

    1993-01-01

    The radioactivity of fine papers has been studied through γ-ray spectroscopy with an intrinsic Ge detector. Samples of paper from European and North American sources were found to contain very different amounts of 226 Ra and 232 Th. The processes which introduce radionuclides into paper are discussed. The radioactivity from fine papers makes only a small contribution to an individual's annual radiation dose; nevertheless it is easily detectable and perhaps, avoidable. (Author)

  16. Data quality white paper.

    Science.gov (United States)

    2008-06-01

    This paper looks at the issue of data quality within the context of transportation operations and management. The objective of this paper is to investigate data quality measures and how they are applied in existing systems. This paper explores the re...

  17. Fuel ethanol discussion paper

    International Nuclear Information System (INIS)

    1992-01-01

    In recognition of the potential benefits of ethanol and the merits of encouraging value-added agricultural development, a committee was formed to develop options for the role of the Ontario Ministry of Agriculture and Food in the further development of the ethanol industry in Ontario. A consultation with interested parties produced a discussion paper which begins with an outline of the role of ethanol as an alternative fuel. Ethanol issues which require industry consideration are presented, including the function of ethanol as a gasoline oxygenate or octane enhancer, environmental impacts, energy impacts, agricultural impacts, trade and fiscal implications, and regulation. The ethanol industry and distribution systems in Ontario are then described. The current industry consists of one ethanol plant and over 30 retail stations. The key issue for expanding the industry is the economics of producing ethanol. At present, production of ethanol in the short term depends on tax incentives amounting to 23.2 cents/l. In the longer term, a significant reduction in feedstock costs and a significant improvement in processing technology, or equally significant gasoline price increases, will be needed to create a sustainable ethanol industry that does not need incentives. Possible roles for the Ministry are identified, such as support for ethanol research and development, financial support for construction of ethanol plants, and active encouragement of market demand for ethanol-blended gasolines

  18. ICNIRP Initiatives (invited paper)

    International Nuclear Information System (INIS)

    Bernhardt, J.H.

    1999-01-01

    The International Commission on Non-Ionizing Radiation Protection (ICNIRP) is the independent, non-governmental, scientific organisation, comprising all essential scientific disciplines, which, together with the WHO, is qualified to assess health effects of exposure to electromagnetic fields. ICNIRP uses the results of this assessment of draft health based exposure guidelines. The development of exposure guidelines requires a critical, in depth evaluation of the established scientific literature. The paper describes some criteria used for health risk assessment. Dosimetry is one of the most critical components of any scientific study assessing effects of electromagnetic fields on biological systems. Induced electric fields or current densities and specific absorption rate (SAR) are the fundamental and widely accepted dosimetric parameters. Significant recent dosimetric developments include the introduction of anatomically derived voxel-based electromagnetic models of the human body of various resolutions as well as varieties of effective numerical schemes. Due to these developments it is possible to analyse systematically the relationship between various exposure parameters and the fundamental dosimetric parameters. An appropriate metric for EMF epidemiology should be sufficiently comprehensive to allow the determination of the basic dosimetric quantities, their amplitudes and distribution in the human body. (author)

  19. The physics of paper

    International Nuclear Information System (INIS)

    Alava, Mikko; Niskanen, Kaarlo

    2006-01-01

    Paper is a material known to everybody. It has a network structure consisting of wood fibres that can be mimicked by cooking a portion of spaghetti and pouring it on a plate, to form a planar assembly of fibres that lie roughly horizontal. Real paper also contains other constituents added for technical purposes. This review has two main lines of thought. First, in the introductory part, we consider the physics that one encounters when 'using' paper, an everyday material that exhibits the presence of disorder. Questions arise, for instance, as to why some papers are opaque and others translucent, some are sturdy and others sloppy, some readily absorb drops of liquid while others resist the penetration of water. The mechanical and rheological properties of paper and paperboard are also interesting. They are inherently dependent on moisture content. In humid conditions paper is ductile and soft, in dry conditions brittle and hard. In the second part we explain in more detail research problems concerned with paper. We start with paper structure. Paper is made by dewatering a suspension of fibres starting from very low content of solids. The processes of aggregation, sedimentation and clustering are familiar from statistical mechanics. Statistical growth models or packing models can simulate paper formation well and teach a lot about its structure. The second research area that we consider is the elastic and viscoelastic properties and fracture of paper and paperboard. This has traditionally been the strongest area of paper physics. There are many similarities to, but also important differences from, composite materials. Paper has proved to be convenient test material for new theories in statistical fracture mechanics. Polymer physics and memory effects are encountered when studying creep and stress relaxation in paper. Water is a 'softener' of paper. In humid conditions, the creep rate of paper is much higher than in dry conditions. The third among our topics is the

  20. Malaysia; Background Paper

    OpenAIRE

    International Monetary Fund

    1996-01-01

    This Background Paper on Malaysia examines developments and trends in the labor market since the mid-1980s. The paper describes the changes in the employment structure and the labor force. It reviews wages and productivity trends and their effects on unit labor cost. The paper highlights that Malaysia’s rapid growth, sustained since 1987, has had a major impact on the labor market. The paper outlines the major policy measures to address the labor constraints. It also analyzes Malaysia’s recen...

  1. Stellenbosch Papers in Linguistics

    African Journals Online (AJOL)

    Stellenbosch Papers in Linguistics (SPiL) is an annual/biannual open access, peer-reviewed international journal, published by the Department of General Linguistics, Stellenbosch University. The papers published in SPiL are ... Poetry in South African Sign Language: What is different? EMAIL FREE FULL TEXT EMAIL ...

  2. Crepe Paper Colorimetry.

    Science.gov (United States)

    Pringle, David L.; And Others

    1995-01-01

    Uses crepe paper for the introduction of spectrophotometric concepts. Dyes used in the manufacturing of the crepe paper dissolve rapidly in water to produce solutions of colors. The variety of colors provides spectra in the visible spectrum that allow students to grasp concepts of absorption and transmission. (AIM)

  3. Archives: Philosophical Papers

    African Journals Online (AJOL)

    Items 1 - 26 of 26 ... Archives: Philosophical Papers. Journal Home > Archives: Philosophical Papers. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 26 of 26 Items. 2008. Vol 37 ...

  4. The Mock Research Paper

    Science.gov (United States)

    Clark, Carlton

    2008-01-01

    The mock research paper combines creative writing with academic writing and, in the process, breaks down that binary. This article describes a writing assignment that offers an introduction to the college research paper genre. This assignment helps students focus on crafting an argument and learning genre conventions while postponing until the…

  5. Paper microzone plates.

    Science.gov (United States)

    Carrilho, Emanuel; Phillips, Scott T; Vella, Sarah J; Martinez, Andres W; Whitesides, George M

    2009-08-01

    This paper describes 96- and 384-microzone plates fabricated in paper as alternatives to conventional multiwell plates fabricated in molded polymers. Paper-based plates are functionally related to plastic well plates, but they offer new capabilities. For example, paper-microzone plates are thin (approximately 180 microm), require small volumes of sample (5 microL per zone), and can be manufactured from inexpensive materials ($0.05 per plate). The paper-based plates are fabricated by patterning sheets of paper, using photolithography, into hydrophilic zones surrounded by hydrophobic polymeric barriers. This photolithography used an inexpensive formulation photoresist that allows rapid (approximately 15 min) prototyping of paper-based plates. These plates are compatible with conventional microplate readers for quantitative absorbance and fluorescence measurements. The limit of detection per zone loaded for fluorescence was 125 fmol for fluorescein isothiocyanate-labeled bovine serum albumin, and this level corresponds to 0.02 the quantity of analyte per well used to achieve comparable signal-to-noise in a 96-well plastic plate (using a solution of 25 nM labeled protein). The limits of detection for absorbance on paper was approximately 50 pmol per zone for both Coomassie Brilliant Blue and Amaranth dyes; these values were 0.4 that required for the plastic plate. Demonstration of quantitative colorimetric correlations using a scanner or camera to image the zones and to measure the intensity of color, makes it possible to conduct assays without a microplate reader.

  6. Paper Punch Tape

    CERN Multimedia

    Physicists coded and recorded their programs through series of holes on punch paper tape or on punched cards. It was popular in the 1970s due to its high throughput speed and low cost, paper tape was one of the original data storage methods for computers. Information was encoded in the distinct pattern of holes punched in the paper; the paper itself was oiled to facilitate being run through the reading mechanism and to prevent tears due to brittleness. Though the paper was cheap, it had low storage capacity (only a few dozen kilobytes per roll) and the machinery involved in punching the holes was quite expensive. Higher capacity alternatives, such as magnetic tape, has get developped.

  7. Selected working papers

    International Nuclear Information System (INIS)

    2002-01-01

    The following working papers are included in this report: WP 2002-2, Dictionary Restructuring; WP-2002-4, Page numbers for REFERENCE (CP-C/285); WP-2002-5, Correlation quantities; WP 2002-8, Proposed data heading EN-CM-TOT (memo CP-A/121); WP 2002-9, Proposed high energy quantities (memo CP-A/123); WP 2002-11, Use of nuclide codes in SF 7 (memo CP-C/302); WP 2002-12, Redundant coding, new data heading PART-OUT; WP 2002-16, Zeros in error field (CP-C/306); WP 2002-17, Multiple appearance of the first Reference in EXFOR; WP 2002-18 + Add., EXFOR master file comparisons; WP 2002-19, Measures of Security at the NDS Open Area for EXFOR; WP 2002-20, New and revised entries received at NDS; WP 2002-21, EXFOR transmissions (NNDC); WP 2002-22, CINDA statistics (NNDC); WP 2002-24, CINDA batch exchange information (NDS); WP 2002-25, Journal coverage for CINDA; WP 2002-26, EXFOR-relational as multi-platform database (V. Zerkin); WP 2002-27, Completeness of EXFOR compil. as indexed by CINDA; WP 2002-28, Future NRDC Cooperation on CINDA: see Appendix 9; WP 2002-31, Development of Web Editor for Charged-Particle Nuclear Reaction Data (N. Otuka, H. Noto, A. Ohnishi, K. Kato). The following other papers, or the memos of which they consist, are available from the IAEA Nuclear Data Section: WP 2002-1, Actions of previous meetings (2002, 2001) see INDC(NDS)-427, pp.20-26, and INDC(NDS)-418, pp.26-31; WP 2002-3, Units for particle and product yields: see memos CP-C/294, 286; WP 2002-6, 4-momentum transfer and mom.distr.data: see memos CP-C/295 and CP-D/330; WP 2002-7, Several 'straightforward' new quantities: see memos CP-/C-291, 298 and CP-A/118; WP 2002-10, Quantities proposed by JCPRG (see memos DP-D/337, CP-E/004, 003); WP 2002-13, Clarifications on Product Yields and Thick Target Yields (see memo CP-D/332); WP 2002-14, Clarifications on Polarization quantities (see memo CP-D/320); WP 2002-15, New Legendre polynomial modifier proposed (see CP-C/305); WP 2002-23, see memo 4C-4

  8. Deformable paper origami optoelectronic devices

    KAUST Repository

    He, Jr-Hau

    2017-01-19

    Deformable optoelectronic devices are provided, including photodetectors, photodiodes, and photovoltaic cells. The devices can be made on a variety of paper substrates, and can include a plurality of fold segments in the paper substrate creating a deformable pattern. Thin electrode layers and semiconductor nanowire layers can be attached to the substrate, creating the optoelectronic device. The devices can be highly deformable, e.g. capable of undergoing strains of 500% or more, bending angles of 25° or more, and/or twist angles of 270° or more. Methods of making the deformable optoelectronic devices and methods of using, e.g. as a photodetector, are also provided.

  9. Radiography using photographic paper

    International Nuclear Information System (INIS)

    Gromov, Yu.V.; Kapustin, V.I.; Volkova, T.G.

    1982-01-01

    The possibility of radiographic control with application of ''Fototelegrafnaya BS'' photographic paper in conjunction with the ''Standart'' image intensifier as an X-ray image converter is studied. Investigations were made using steel samples 5 to 45 mm thick, X-ray radiation energy varied from 80 to 240 keV. Specifications of the image intensifier of the ''Standart type and photographic paper are given. It is shown, that the photographic paper improves the sensitivity of the method to the detection of small defects. The method provides standard and panoramic radioscopy, conservation of objective documentation, enables one to mechanize and automatize the process of photodevelopment. The application of the photographic paper is beneficial, its cost being six times as low as that of X-ray film

  10. Link to paper

    Data.gov (United States)

    U.S. Environmental Protection Agency — Link to the paper. This dataset is associated with the following publication: Naile, J., A.W. Garrison, J. Avants, and J. Washington. Isomers/enantiomers of...

  11. ESCO White Paper

    Science.gov (United States)

    EPA developed this white paper to explore energy performance contracting with Energy Service Companies (ESCOs) and its potential to be a best practice for installing solar thermal water heating systems in the commercial and industrial sector.

  12. A SEMINAR PAPER

    African Journals Online (AJOL)

    SIRIUS

    on this major objective, the paper among other specific objectives, examines the role of ... discovering facts and principles needed for the solution of identified problems ... The question often raised here, is, have these laudable objectives of.

  13. Paper, Profile, Petrarch

    DEFF Research Database (Denmark)

    Foote, Jonathan

    2018-01-01

    , the antique lexicon). By working them out together on the same sheet, the boundaries erode between whittling lines of poetry and carving blocks of stone. Unlike previous attempts to connect Michelangelo's architecture and poetry, this paper focuses on the materiality of the paper as a meeting point between...... the question of what might be discovered by looking closer at these three paper modani (Corpus 536, 538, 539). The verses on the modani are merely fragments and revisions, part of a lineage of multiple and incomplete sources. At the same time, as 1:1 scaled templates, the modani empowered in a unique way...... Michelangelo's well-known propensity toward the fragmentation and re-assembly of the profile line. What emerges is how the paper enabled parallel processes of iteration, cutting and substitution, each operating within rather strict formal boundaries (for the poem, the Petrarchan sonnet; for the architecture...

  14. Quantum interaction. Selected papers

    Energy Technology Data Exchange (ETDEWEB)

    Atmanspacher, Harald [Eidgenoessische Technische Hochschule, Zurich (Switzerland); Haven, Emmanuel [Leicester Univ. (United Kingdom). School of Management; Kitto, Kirsty [Queensland Univ. of Technology, Brisbane, QLD (Australia); Raine, Derek (ed.) [Leicester Univ. (United Kingdom). Centre for Interdisciplinary Science

    2014-07-01

    This book constitutes the refereed proceedings of the 7th International Conference on Quantum Interaction, QI 2013, held in Leicester, UK, in July 2013. The 31 papers presented in this book were carefully selected from numerous submissions. The papers cover various topics on quantum interaction and revolve around four themes: information processing/retrieval/semantic representation and logic; cognition and decision making; finance/economics and social structures and biological systems.

  15. Abstracts of contributed papers

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This volume contains 571 abstracts of contributed papers to be presented during the Twelfth US National Congress of Applied Mechanics. Abstracts are arranged in the order in which they fall in the program -- the main sessions are listed chronologically in the Table of Contents. The Author Index is in alphabetical order and lists each paper number (matching the schedule in the Final Program) with its corresponding page number in the book.

  16. Paper From Rocks

    Institute of Scientific and Technical Information of China (English)

    TANG YUANKAI

    2010-01-01

    @@ Papermaking techniques are undergoing a great revolution and a new paper made from stone is lining up to take the place of the conventional type. At this year's National People's Congress of China and the Chinese People's Political Consultative Conference that is to start on March 3, all the file bags and scratchpads will be made from a new type of low-carbon paper which is environmentally friendly.

  17. Quantum interaction. Selected papers

    International Nuclear Information System (INIS)

    Atmanspacher, Harald; Haven, Emmanuel; Raine, Derek

    2014-01-01

    This book constitutes the refereed proceedings of the 7th International Conference on Quantum Interaction, QI 2013, held in Leicester, UK, in July 2013. The 31 papers presented in this book were carefully selected from numerous submissions. The papers cover various topics on quantum interaction and revolve around four themes: information processing/retrieval/semantic representation and logic; cognition and decision making; finance/economics and social structures and biological systems.

  18. PaperBLAST: Text Mining Papers for Information about Homologs.

    Science.gov (United States)

    Price, Morgan N; Arkin, Adam P

    2017-01-01

    Large-scale genome sequencing has identified millions of protein-coding genes whose function is unknown. Many of these proteins are similar to characterized proteins from other organisms, but much of this information is missing from annotation databases and is hidden in the scientific literature. To make this information accessible, PaperBLAST uses EuropePMC to search the full text of scientific articles for references to genes. PaperBLAST also takes advantage of curated resources (Swiss-Prot, GeneRIF, and EcoCyc) that link protein sequences to scientific articles. PaperBLAST's database includes over 700,000 scientific articles that mention over 400,000 different proteins. Given a protein of interest, PaperBLAST quickly finds similar proteins that are discussed in the literature and presents snippets of text from relevant articles or from the curators. PaperBLAST is available at http://papers.genomics.lbl.gov/. IMPORTANCE With the recent explosion of genome sequencing data, there are now millions of uncharacterized proteins. If a scientist becomes interested in one of these proteins, it can be very difficult to find information as to its likely function. Often a protein whose sequence is similar, and which is likely to have a similar function, has been studied already, but this information is not available in any database. To help find articles about similar proteins, PaperBLAST searches the full text of scientific articles for protein identifiers or gene identifiers, and it links these articles to protein sequences. Then, given a protein of interest, it can quickly find similar proteins in its database by using standard software (BLAST), and it can show snippets of text from relevant papers. We hope that PaperBLAST will make it easier for biologists to predict proteins' functions.

  19. All-printed paper memory

    KAUST Repository

    He, Jr-Hau

    2016-08-11

    All-printed paper-based substrate memory devices are described. In an embodiment, a paper-based memory device is prepared by coating one or more areas of a paper substrate with a conductor material such as a carbon paste, to form a first electrode of a memory, depositing a layer of insulator material, such as titanium dioxide, over one or more areas of the conductor material, and depositing a layer of metal over one or more areas of the insulator material to form a second electrode of the memory. In an embodiment, the device can further include diodes printed between the insulator material and the second electrode, and the first electrode and the second electrodes can be formed as a crossbar structure to provide a WORM memory. The various layers and the diodes can be printed onto the paper substrate by, for example, an ink jet printer.

  20. Charcoal from paper sludge

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, M

    1980-03-06

    Paper sludge containing less than or equal to 50% water is mixed with coffee shells and greater than or equal to 1 almond shells, orange skin, walnut shells, or bean jam waste, compacted, and dry distilled at 300-600 degrees to prepare charcoal. Thus, 1 ton of paper sludge was mixed with 100 kg each of coffee shells, almond shells, orange skin, and walnut shells; compacted and dry distilled 24 hours at approximately 450 degrees. The calorific value of the charcoal produced was approximately 7300 kcal/kg.

  1. Static, Lightweight Includes Resolution for PHP

    NARCIS (Netherlands)

    M.A. Hills (Mark); P. Klint (Paul); J.J. Vinju (Jurgen)

    2014-01-01

    htmlabstractDynamic languages include a number of features that are challenging to model properly in static analysis tools. In PHP, one of these features is the include expression, where an arbitrary expression provides the path of the file to include at runtime. In this paper we present two

  2. IDEA papers no 6

    International Nuclear Information System (INIS)

    Garrigues, Ph.

    2003-01-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA paper no. 6 is presents the association and the results of the ordinary general assembly of the 28 June 2003. (A.L.B.)

  3. IDEA papers no 10

    International Nuclear Information System (INIS)

    Ricard, M.

    2004-01-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA paper no.10 is devoted to the sustainable development education. Examples of actions in agriculture schools and colleges are presented. (A.L.B.)

  4. Overall review paper

    International Nuclear Information System (INIS)

    Curran, S.

    1981-01-01

    A review is given of the papers presented at the European Symposium on Fast Breeder Reactors in the context of the early history of nuclear energy, the concept of breeding, the safety of the breeder, terrorism and other hazards, the need for more energy, human factors and safety. (U.K.)

  5. Eleven papers in analysis

    CERN Document Server

    Shabalin, P L; Yakubenko, A A; Pokhilevich, VA; Krein, M G

    1986-01-01

    This collection of eleven papers covers a broad spectrum of topics in analysis, from the study of certain classes of analytic functions to the solvability of singular problems for differential and integral equations to computational schemes for the partial differential equations and singular integral equations.

  6. Commentary on the Papers

    Science.gov (United States)

    Howe, Christine; Mercer, Neil

    2017-01-01

    This commentary discusses the four papers that comprise the special issue on dialogic teaching and learning, while making general observations that apply across the field as a whole. Similarities and differences are identified over the concepts of "dialogue" and "dialogic pedagogy". The possibility is raised that some aspects…

  7. IDEA papers no. 1

    International Nuclear Information System (INIS)

    Garrigues, P.

    2002-04-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA paper no. 1 provides information such as, meeting, Internet addresses and programs, for the month of April 2002. (A.L.B.)

  8. Paper relief architecture

    NARCIS (Netherlands)

    Latka, J.F.

    2014-01-01

    The article presents two contemporary projects of paper structures relief architecture designed and built by Shigeru Ban Architects and Voluntary Architect Network. Author of the article took part in design and construction process of one of the projects. The project of Yaan Nursery School, which

  9. Taming the paper tiger

    International Nuclear Information System (INIS)

    Hooper, W.

    1994-01-01

    The mountain of paper and digital records which the nuclear industry accumulates creates a huge management problem, one that must be dealt with rigorously to avoid serious safety and financial risks. Recent developments in the technology of ''engineering document management'', together with advances in management understanding, have led to systems to control the problem, offering companies various strategic advantages as well. (author)

  10. Abstracts of submitted papers

    International Nuclear Information System (INIS)

    1987-01-01

    The conference proceedings contain 152 abstracts of presented papers relating to various aspects of personnel dosimetry, the dosimetry of the working and living environment, various types of dosemeters and spectrometers, the use of radionuclides in various industrial fields, the migration of radionuclides on Czechoslovak territory after the Chernobyl accident, theoretical studies of some parameters of ionizing radiation detectors, and their calibration. (M.D.)

  11. Papers in auction theory

    NARCIS (Netherlands)

    Onderstal, A.M.

    2002-01-01

    This thesis is a collection of six papers in auction theory, with several economic applications, both to real life auctions and to other economic phenomena. In the introduction to the thesis, Onderstal argues why auction theory is an important branch of economic theory, and discusses several

  12. IDEA papers no 3

    International Nuclear Information System (INIS)

    Lacour, C.

    2002-12-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA paper no. 3 is devoted to the part of the environment observation in the sustainable development implementation. (A.L.B.)

  13. From Paper to PDA

    DEFF Research Database (Denmark)

    Kanstrup, Anne Marie; Stage, Jan

    2009-01-01

    Mobile devices with small screens and minimal facilities for interaction are increasingly being used in complex human activities for accessing and processing information, while the user is moving. This paper presents a case study of the design and evaluation of a mobile system, which involved...

  14. Welfare's Children. Discussion Paper.

    Science.gov (United States)

    Wiseman, Michael

    States with family cap public assistance policies deny or reduce additional welfare benefits to mothers who conceive and give birth to additional children while they are receiving aid. By 1999, 22 states had family cap policies in place. This paper reports estimates of the number and cost implications of infants conceived by mothers receiving…

  15. Two three pages papers

    NARCIS (Netherlands)

    Apt, K.R.; Constable, R.L.; Silva, A.

    2012-01-01

    Dexter was my manager during the first 8 months or so of my one year stay at the IBM Research Center at Yorktown Heights in the mid eighties. Our interaction in terms of scientific output was very slim — it consisted of just a single paper, titled "Limits for automatic verification of finite-state

  16. Characterization of Paper Heterogeneity

    Science.gov (United States)

    John M. Considine

    2014-01-01

    Paper and paperboard are the most widely-used green materials in the world because they are renewable, recyclable, reusable, and compostable. Continued and expanded use of these materials and their potential use in new products requires a comprehensive understanding of the variability of their mechanical properties.

  17. One minute paper

    African Journals Online (AJOL)

    Arun Kumar Agnihotri

    One-Minute Paper: A thinking centered assessment tool. Ashakiran ... achievement of objectives and learning ability of the students, to analyze the questioning pattern of ... factual information, rote memory and critical thinking. The aim of every teacher while teaching ... question prompts another higher order cognitive skill ...

  18. ENRM Working Paper Template

    International Development Research Centre (IDRC) Digital Library (Canada)

    evidence based policy making. Canada's ... not subject to peer review, nor reviewed or edited for style and content. The views ... This paper develops a simple model to disentangle the effect of education on incomes by .... with prior belief, returns to education were low in agriculture, and resulted from lacking learning ...

  19. Quantum Entanglements: Selected Papers

    International Nuclear Information System (INIS)

    Giannetto, E

    2005-01-01

    This book is a sort of tribute to Rob Clifton (1964-2002), Associate Professor of Philosophy and Associate Director of the Center for Philosophy of Science at the University of Pittsburgh, philosopher of physics and editor of the journal Studies in the History and Philosophy of Modern Physics, who tragically died of cancer. It contains fourteen papers by Clifton, for the most part written in collaboration with other authors (Jeffrey Bub (2), Sheldon Goldstein, Michael Dickson, Hans Halvorson (6), Adrian Kent (2)), published between 1995 and 2002. The choice of papers made by the editors is very impressive. They concern the foundations of quantum mechanics and quantum field theory. Among the issues discussed are the modal interpretations of quantum mechanics, the problems of hidden variables theories, non-locality, Bell's inequality, the Einstein-Podolsky-Rosen paradox, Lorentz invariance, de-coherence, non-contextuality, complementarity, entanglement and quantum information. A consequence of such investigations is that non-separability is a more complex issue than violation of Bell's inequality. Apart from the perspective one can follow-whether one agrees or not with Clifton-these papers are effective contributions to an understanding of the problems involved in the foundations of quantum mechanics. The most interesting parts, in my opinion, are related to the extension of the discussion of foundational problems to quantum field theory: on the algebraic approach, and on the twin concepts of particle and vacuum. Non-locality appears to be 'worse' in relativistic quantum field theory than in non-relativistic quantum mechanics. All the papers deal with relevant epistemological and even historical aspects of quantum mechanics interpretations, but all the issues are discussed from a technical, logical and mathematical approach. A complete bibliography of Clifton's papers is given at the end of the volume. (book review)

  20. Review paper. Terminal lucidity

    Directory of Open Access Journals (Sweden)

    Chiriboga-Oleszczak Boris Alejandro

    2017-03-01

    Full Text Available Terminal lucidity is a term used in the medical literature to determine the improvement of mental functioning shortly before death, even among patients with serious and long-term disorders. In 19th century, cases of mind clarity recovery shortly before death, were often recognized by doctors and interpreted as a sign of an impending death. In 20th century, the interest in this phenomenon decreased and then, virtually disappear. In recent years, on the wave of publications concerning near death experiences and related events such as the end of life experiences, papers about the improvement of mental functioning shortly before death, exponentially grew and got a new name, terminal lucidity. In this paper, an overview of the available literature is presented to outline the historical, phenomenological and clinical picture of this phenomenon and its possible implications for medical care and future studies.

  1. Pencil and paper

    DEFF Research Database (Denmark)

    Wong, Bang; Kjærgaard, Rikke Schmidt

    2012-01-01

    Creating pictures is integral to scientific thinking. In the visualization process, putting pencil to paper is an essential act of inward reflec- tion and outward expression. It is a constructive activity that makes our thinking specific and explicit. Compared to other constructive approaches...... such as writing or verbal explanations, visual representa- tion places distinct demands on our reasoning skills by forcing us to contextualize our understanding spatially....

  2. IDEA papers no 8

    International Nuclear Information System (INIS)

    Gillet, M.

    2004-01-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA paper no 8 presents the regional energy observatories and some news on the wood energy experience, the thermal and energetic improvement of buildings and the green certificates in Aquitaine. (A.L.B.)

  3. IDEA papers no 2

    International Nuclear Information System (INIS)

    Cassou, O.

    2002-09-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA paper no. 2 is devoted to the IDEA missions and their cooperation with ''Alliance pour la qualite et la performance''. This association groups actors for the development and the promotion of the quality. (A.L.B.)

  4. Spatial Search, Position Papers

    OpenAIRE

    Center for Spatial Studies, UCSB

    2014-01-01

    The Spatial Search specialist meeting in Santa Barbara (December 2014) brought together 35 academic and industry representatives from computational, geospatial, and cognitive sciences with interest in focused discussions on the development of an interdisciplinary research agenda to advance spatial search from scientific and engineering viewpoints. The position papers from participants represent the shared expertise that guided discussions and the formulation of research questions about proces...

  5. IDEA papers no 11

    International Nuclear Information System (INIS)

    Bocquet, R.

    2004-01-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA paper no.11 is devoted to the wastes management in Aquitaine. Data on wastes volume, type and recycling are presented and examples of enterprises actions are provided. (A.L.B.)

  6. IDEA papers no 7

    International Nuclear Information System (INIS)

    Ducout, P.

    2003-01-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA paper no. 7 is devoted to the water quality and management in Gironde. The european framework directive on water and the humid zones are discussed. (A.L.B.)

  7. Recycling waste-paper

    Science.gov (United States)

    Widener, Edward L.

    1990-01-01

    Perhaps 80 percent of papermaking energy is expended in chemical pulping of vegetable cellulose, a natural polymer. Commercial supplies of wood, bagasse, cotton and flax are valued as renewable resources and bio-mass assets; however, few enterprises will salvage waste-paper and cardboard from their trash. A basic experiment in the Materials Lab uses simple equipment to make crude handsheets. Students learn to classify secondary fibers, identify contraries, and estimate earnings.

  8. IDEA papers no. 9

    International Nuclear Information System (INIS)

    Saint-Paul, J.C

    2004-01-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA paper no. 9 is devoted to the air quality: atmospheric pollution effects on health, nitrogen oxide pollution, air quality monitoring in buildings, the regulations and the atmospheric pollution, emissions land registry objectives and the greenhouse gases. (A.L.B.)

  9. Corrosion/94 conference papers

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    The approximately 500 papers from this conference are divided into the following sections: Rail transit systems--stray current corrosion problems and control; Total quality in the coatings industry; Deterioration mechanisms of alloys at high temperatures--prevention and remediation; Research needs and new developments in oxygen scavengers; Computers in corrosion control--knowledge based system; Corrosion and corrosivity sensors; Corrosion and corrosion control of steel reinforced concrete structures; Microbiologically influenced corrosion; Practical applications in mitigating CO 2 corrosion; Mineral scale deposit control in oilfield-related operations; Corrosion of materials in nuclear systems; Testing nonmetallics for life prediction; Refinery industry corrosion; Underground corrosion control; Mechanisms and applications of deposit and scale control additives; Corrosion in power transmission and distribution systems; Corrosion inhibitor testing and field application in oil and gas systems; Decontamination technology; Ozone in cooling water applications, testing, and mechanisms; Corrosion of water and sewage treatment, collection, and distribution systems; Environmental cracking of materials; Metallurgy of oil and gas field equipment; Corrosion measurement technology; Duplex stainless steels in the chemical process industries; Corrosion in the pulp and paper industry; Advances in cooling water treatment; Marine corrosion; Performance of materials in environments applicable to fossil energy systems; Environmental degradation of and methods of protection for military and aerospace materials; Rail equipment corrosion; Cathodic protection in natural waters; Characterization of air pollution control system environments; and Deposit-related problems in industrial boilers. Papers have been processed separately for inclusion on the data base

  10. Hygroscopic behavior of paper and books

    NARCIS (Netherlands)

    Derluyn, H.; Janssen, H.; Diepens, J.F.L.; Derome, D.; Carmeliet, J.

    2007-01-01

    This study presents experimental analysis and numerical modeling of hygroscopic moisture buffering by paper and books. First, a literature review of moisture transport properties of paper is presented. Experimental work on two paper types includes SEM analysis of the paper structure, determination

  11. Immunolabeling of fingermarks left on forensic relevant surfaces, including thermal paper

    NARCIS (Netherlands)

    van Dam, Annemieke; van Nes, Kirsten A.; Aalders, Maurice C. G.; van Leeuwen, Ton G.; Lambrechts, Saskia A. G.

    2014-01-01

    The chemical composition of a fingermark contains donor profiling information. Immunolabeling is a technique that can be used to retrieve this chemical information from fingermarks. Additionally, immunolabeling can be used to (re) develop fingermarks. To be of interest in the forensic field, the

  12. The future of industrial CHIP in Germany, including the tertiary sector. Papers

    Energy Technology Data Exchange (ETDEWEB)

    Radgen, P; Schmid, C; Mannsbart, W; Jochem, E

    2000-07-01

    In 1998 the electricity production in industrial installations in Germany was about 40 TWh. This accounts for 66% of the total electricity production with CHP plants in Germany. The presentation will analyse the developments for industrial CHP throughout the last 10 years and will try to explain the developments. The difficult situation for the industrial CHP shows up from the sharp decrease of the total installed capacity by about 2000 MW during 1996 and 1998, already in approach of the full liberalisation of the electricity market in Germany, which has resulted in further and even more plant shut downs. Based on a survey of the German Association of Industrial Autoproducers and Energy Consumers (VIK) plants with a total capacity of 500 MW were closed down in 1999, and about 60% of the industrial CHP installation are facing serious economic problems. The presentation will show some sample economic calculations for different types of plants (Coal fired steam turbines, gas turbines, IC-engines). These results will be compared to the actual energy cost structures for industrial customers. Based on large over capacity in power generation, the offered electricity prices for industrial customers tend to be in the range off the operating cost of the industrial CHP plants. One way out of this dilemma is sometimes the outsourcing and contracting of CHP installations, which has been and still is a growing business in Germany, and utilities regard these options as a possibility to keep their industrial customers. (orig.)

  13. PaperBLAST: Text Mining Papers for Information about Homologs

    International Nuclear Information System (INIS)

    Price, Morgan N.; Arkin, Adam P.

    2017-01-01

    Large-scale genome sequencing has identified millions of protein-coding genes whose function is unknown. Many of these proteins are similar to characterized proteins from other organisms, but much of this information is missing from annotation databases and is hidden in the scientific literature. To make this information accessible, PaperBLAST uses EuropePMC to search the full text of scientific articles for references to genes. PaperBLAST also takes advantage of curated resources (Swiss-Prot, GeneRIF, and EcoCyc) that link protein sequences to scientific articles. PaperBLAST’s database includes over 700,000 scientific articles that mention over 400,000 different proteins. Given a protein of interest, PaperBLAST quickly finds similar proteins that are discussed in the literature and presents snippets of text from relevant articles or from the curators. With the recent explosion of genome sequencing data, there are now millions of uncharacterized proteins. If a scientist becomes interested in one of these proteins, it can be very difficult to find information as to its likely function. Often a protein whose sequence is similar, and which is likely to have a similar function, has been studied already, but this information is not available in any database. To help find articles about similar proteins, PaperBLAST searches the full text of scientific articles for protein identifiers or gene identifiers, and it links these articles to protein sequences. Then, given a protein of interest, it can quickly find similar proteins in its database by using standard software (BLAST), and it can show snippets of text from relevant papers. We hope that PaperBLAST will make it easier for biologists to predict proteins’ functions.

  14. Outstanding Student Paper Awards

    Science.gov (United States)

    2004-04-01

    The following members in the Space Physics & Aeronomy Section received Outstanding Student Paper Awards at the 2003 AGU Fall Meeting in San Francisco, California. Arve Aksnes; Aroh Barjatya; Jacob Bortnik; Amir Caspi; Ruben Delgado; Galen Fowler; Paul G. Hanlon; Sid Henderson; Tara B. Hiebert; Chia-Lin Huang; Steven P. Joy; Eun-Hwa Kim; Colby Lemon; Yingjuan Ma; Elizabeth A. MacDonald; Jaco Minnie; Mitsuo Oka; Yoshitaka Okazaki; Erin J. Rigler; Ina P. Robertson; Patrick A. Roddy; Sang-Il Roh; Albert Y. Shih; Christopher Smithtro; Emma Spanswick; Maria Spasojevic; Hiroki Tanaka; Linghua Wang; Deirdre E. Wendel; Jichun Zhang>

  15. Corrosion/95 conference papers

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    The papers in this conference represent the latest technological advances in corrosion control and prevention. The following subject areas are covered: cathodic protection in natural waters; materials for fossil fuel combustion and conversion systems; modern problems in atmospheric corrosion; innovative ideas for controlling the decaying infrastructure; deposits and their effects on corrosion in industry; volatile high temperature and non aqueous corrosion inhibitors; corrosion of light-weight and precoated metals for automotive application; refining industry corrosion; corrosion in pulp and paper industry; arctic/cold weather corrosion; materials selection for waste incinerators and associated equipment; corrosion measurement technology; environmental cracking of materials; advancing technology in the coating industry; corrosion in gas treating; green inhibition; recent advances in corrosion control of rail equipment; velocity effects and erosion corrosion in oil and gas production; marine corrosion; corrosion of materials in nuclear systems; underground corrosion control; corrosion in potable and industrial water systems in buildings and its impact on environmental compliance; deposit related boiler tube failures; boiler systems monitoring and control; recent developments and experiences in reactive metals; microbiologically influenced corrosion; corrosion and corrosion control for steel reinforced concrete; international symposium on the use of 12 and 13 Cr stainless steels in oil and gas production environments; subsea corrosion /erosion monitoring in production facilities; fiberglass reinforced pipe and tubulars in oilfield service; corrosion control technology in power transmission and distribution; mechanisms and methods of scale and deposit control; closing the loop -- results oriented cooling system monitoring and control; and minimization of aqueous discharge

  16. Open Education. Introduction to selected papers

    Directory of Open Access Journals (Sweden)

    Inés Gil-Jaurena

    2017-06-01

    Full Text Available This issue of Open Praxis compiles selected papers presented at the Open Education Consortium Global Conference, held in Cape Town (South Africa on March 8-10, 2017. Additionaly, the Innovative Practice section includes three papers.

  17. Selected papers on analysis and differential equations

    CERN Document Server

    Nomizu, Katsumi

    2003-01-01

    This volume contains translations of papers that originally appeared in the Japanese journal, Sugaku. The papers range over a variety of topics, including nonlinear partial differential equations, C^*-algebras, and Schrödinger operators.

  18. Title for a paper:

    African Journals Online (AJOL)

    gpetros

    ratio (OR)=1.45, p-value <0.001). Multiple sexual partners are significantly more common among those that had early sexual .... ratio test, were included in the multivariate logistic regression .... when adjusting for other variables in the model.

  19. Bibliography of published papers, 1977

    International Nuclear Information System (INIS)

    1978-01-01

    Papers published by RERF (a cooperative Japan-U.S. research organization) personnel mainly in 1977 issues of journals are listed as bibliography giving the title, authors, etc. Mostly in both Japanese and English. The total of about 50 such cover areas as follows; Variety of diseases such as cancer and cardiovascular, dosimetry, genetics, pathology, radiation effects including such as diseases, and summary reports. (Mori, K.)

  20. Discussion on Papers 5 - 7

    International Nuclear Information System (INIS)

    Strongman, C.P.; Jones, R.; Moorhead, H.

    1992-01-01

    The topics raised in discussion included: the performance of the generator sets; the movement of sediments and the effect on beach levels; monitoring near-bed sediments; the erosion of barrage materials by suspended solids; sediment transport models; the accuracy of hydrographic and other surveys; the relative ornithological importance of the estuary with respect to others in the United Kingdom. Separate abstracts were prepared for each of the three papers under discussion. (UK)

  1. Position paper on mesotherapy.

    Science.gov (United States)

    Sarkar, Rashmi; Garg, Vijay Kumar; Mysore, Venkataram

    2011-01-01

    Mesotherapy is a controversial cosmetic procedure which has received publicity among the lay people, in the internet and in the media. It refers to minimally invasive techniques which consist of the use of intra- or subcutaneous injections containing liquid mixture of compounds (pharmaceutical and homeopathic medications, plant extracts, vitamins and other ingredients) to treat local medical and cosmetic conditions. This position paper has examined the available evidence and finds that acceptable scientific evidence for its effectiveness and safety is lacking. IADVL taskforce, therefore would like to state that the use of this technique remains controversial at present. Further research and well-designed controlled scientific studies are required to substantiate the claims of benefit of this mode of therapy.

  2. Position paper on mesotherapy

    Directory of Open Access Journals (Sweden)

    Rashmi Sarkar

    2011-01-01

    Full Text Available Mesotherapy is a controversial cosmetic procedure which has received publicity among the lay people, in the internet and in the media. It refers to minimally invasive techniques which consist of the use of intra- or subcutaneous injections containing liquid mixture of compounds (pharmaceutical and homeopathic medications, plant extracts, vitamins and other ingredients to treat local medical and cosmetic conditions. This position paper has examined the available evidence and finds that acceptable scientific evidence for its effectiveness and safety is lacking. IADVL taskforce, therefore would like to state that the use of this technique remains controversial at present. Further research and well-designed controlled scientific studies are required to substantiate the claims of benefit of this mode of therapy.

  3. Papers and originals.

    Science.gov (United States)

    Rogers, D; Tripp, J; Bentovim, A; Robinson, A; Berry, D; Goulding, R

    1976-04-03

    Six cases of persistent non-accidental poisoning of children by their parents are reported. Certain features may draw attention to the diagnosis, particularly bizarre symptoms and signs with no apparent pathological explanation, and toxicological analysis should be carried out to obtain rapid confirmation of the diagnosis. The underlying disorder may include marital conflict, overinvolvement between parent and child, or drug abuse in the parents. A suggested plan of action for managing this problem is outlined.

  4. 40 CFR 247.10 - Paper and paper products.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Paper and paper products. 247.10... COMPREHENSIVE PROCUREMENT GUIDELINE FOR PRODUCTS CONTAINING RECOVERED MATERIALS Item Designations § 247.10 Paper and paper products. Paper and paper products, excluding building and construction paper grades. ...

  5. Including spatial data in nutrient balance modelling on dairy farms

    Science.gov (United States)

    van Leeuwen, Maricke; van Middelaar, Corina; Stoof, Cathelijne; Oenema, Jouke; Stoorvogel, Jetse; de Boer, Imke

    2017-04-01

    at Dutch dairy farms. We selected two dairy farms located on cover sands in the Netherlands. One farm was located on relatively homogeneous soil type, and one on many different soil types within the sandy soils. A full year of data of N and P inputs and outputs on farm and field level were provided by the farmers, including field level yields, yield composition, manure composition, degree of grazing and degree of mowing. Soil heterogeneity was defined as the number of soil units within the farm corrected for surface area, and quantified from the Dutch 1:50.000 soil map. N and P balances at farm and field level were determined, as well as differences in nutrient use efficiency, leaching, and N emission. We will present the effect of the spatial scale on nutrient balance analysis and discuss to which degree any differences are caused by within-farm land management and soil variation. This study highlights to which extent within-farm land management and soil variation should be taken into account when modelling nutrient flows and nutrient use efficiencies at farm level, to contribute to field-based decision making for improved land management.

  6. Ultrathin (Nanocellulose Paper

    Science.gov (United States)

    Wu, Jingda; Lin, Lih Y.

    2017-03-01

    Conventional approaches to flexible optoelectronic devices typically require depositing the active materials on external substrates. This is mostly due to the weak bonding between individual molecules or nanocrystals in the active materials, which prevents sustaining a freestanding thin film. Herein we demonstrate an ultrathin freestanding ZnO quantum dot (QD) active layer with nanocellulose structuring, and its corresponding device fabrication method to achieve substrate-free flexible optoelectronic devices. The ultrathin ZnO QD-nanocellulose composite is obtained by hydrogel transfer printing and solvent-exchange processes to overcome the water capillary force which is detrimental to achieving freestanding thin films. We achieved an active nanocellulose paper with ~550 nm thickness, and >91% transparency in the visible wavelength range. The film retains the photoconductive and photoluminescent properties of ZnO QDs and is applied towards substrate-free Schottky photodetector applications. The device has an overall thickness of ~670 nm, which is the thinnest freestanding optoelectronic device to date, to the best of our knowledge, and functions as a self-powered visible-blind ultraviolet photodetector. This platform can be readily applied to other nano materials as well as other optoelectronic device applications.

  7. Classic papers in combinatorics

    CERN Document Server

    Rota, Gian-Carlo

    1987-01-01

    This volume surveys the development of combinatorics since 1930 by presenting in chronological order the fundamental results of the subject proved in over five decades of original papers by:.-T. van Aardenne-Ehrenfest.-R.L. Brooks.-N.G. de Bruijn.-G.F. Clements.-H.H. Crapo.-R.P. Dilworth.-J. Edmonds.-P.Erdös.-L.R. Ford, Jr.-D.R. Fulkerson.-D. Gale.-L. Geissinger.-I.J. Good.-R.L. Graham.-A.W. Hales.-P. Hall.-P.R. Halmos.-R.I. Jewett.-I. Kaplansky.-P.W. Kasteleyn.-G. Katona.-D.J. Kleitman.-K. Leeb.-B. Lindström.-L. Lovász.-D. Lubell.-C. St. J.A. Nash-Williams.-G. Pólya.-F.P. Ramsey.-G.C. Rota.-B.L. Rothschild.-H.J. Ryser.-C. Schensted.-M.P. Schützenberger.-R.P. Stanley.-G. Szekeres.-W.T. Tutte.-H.E. Vaughan.-H. Whitney.

  8. capital. A discussion paper

    Directory of Open Access Journals (Sweden)

    Ewa Chojnacka

    2015-04-01

    Full Text Available The purpose of this study is to confront certain propositions presented in Lesław Niemczyk’s publication Rachunkowość finansowa aktywów kompetencyjnych i kapitału intelektualnego. Nowy dział rachunkowości(Accounting for Competence Assets and Intellectual Capital. A New Area in Accounting with ideas published in other studies. The authors discuss issues concerning firm value, selected definitions of intellectual capital, as well as certain methods of intellectual capital measurement and valuation. Other problems analysed include accounting for and reporting of intellectual capital and similarities and differences between the way those issues are presented in Polish and in international studies as well as in existing legal regulations and standards.

  9. Position paper on standardization

    International Nuclear Information System (INIS)

    1991-04-01

    The ''NPOC Strategic Plan for Building New Nuclear Plants'' creates a framework within which new standardized nuclear plants may be built. The Strategic Plan is an expression of the nuclear energy industry's serious intent to create the necessary conditions for new plant construction and operation. One of the key elements of the Strategic Plan is a comprehensive industry commitment to standardization: through design certification, combined license, first-of-a-kind engineering, construction, operation and maintenance of nuclear power plants. The NPOC plan proposes four stages of standardization in advanced light water reactors (ALWRs). The first stage is established by the ALWR Utility Requirements Document which specifies owner/operator requirements at a functional level covering all elements of plant design and construction, and many aspects of operations and maintenance. The second stage of standardization is that achieved in the NRC design certification. This certification level includes requirements, design criteria and bases, functional descriptions and performance requirements for systems to assure plant safety. The third stage of standardization, commercial standardization, carries the design to a level of completion beyond that required for design certification to enable the industry to achieve potential increases in efficiency and economy. The final stage of standardization is enhanced standardization beyond design. A standardized approach is being developed in construction practices, operating, maintenance training, and procurement practices. This comprehensive standardization program enables the NRC to proceed with design certification with the confidence that standardization beyond the regulations will be achieved. This confidence should answer the question of design detail required for design certification, and demonstrate that the NRC should require no further regulatory review beyond that required by 10 CFR Part 52

  10. Paper (essay on seed

    Directory of Open Access Journals (Sweden)

    Mirić Mladen

    2013-01-01

    Full Text Available Based on detailed studies of the past of the agrarian thought of the world (evolution of agro-innovation, and within it, the relationship of man and seed, the author has selected key data for Table 1. In addition, more or less known folk sayings, proverbs, curses and allegories in which the seed is the key word have been collected. Then, religious books, folk art and literature works (sayings of prominent individuals and experts and observations of the author himself have been studied. According to the collected opus, it can be concluded that the vast importance of seed meaningfully entwined into all spheres of folk life and cultural heritage. Seed is directly tied to the following eight key (revolutionary milestones in the food and economic life of mankind: 1. the first and for the longest time, the seed used to be the main food of the people and the first food reserve; 2. Neolithic Revolution was simply caused by the sowing of seeds; 3. for the sake of sowing man began to develop more complex processing techniques; 4. everywhere and forever, especially since the late 15th century, the seed has been a carrier of (rescuing plants between Europe and the New World, that is, between continents; 5. seed was the first product that has been chemically treated since the mid-18th century; 6. standard operation procedures and quality are promoted on seed by which it became the first product to have prescribed (compulsory methods, but it also became a good whose quality has to be tested before sale; 7. hybrid seed is a 'perpetrator' of the green revolution in the mid-20th century and at last there is disputable seed of genetically modified organisms that are spreading with certain reactions. The author proposes that the United Nations Standard International Trade Classification includes a special section (division which would classify the seed for sowing, while beyond this Classification terms such as seed, plant seed should be replaced with non

  11. Partially ionized plasmas including the third symposium on uranium plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Krishnan, M. [ed.

    1976-09-01

    Separate abstracts are included for 28 papers on electrically generated plasmas, fission generated plasmas, nuclear pumped lasers, gaseous fuel reactor research, and applications. Five papers have been previously abstracted and included in ERA.

  12. Infrared thermography for examination of paper structure

    Science.gov (United States)

    Kiiskinen, Harri T.; Pakarinen, Pekka I.

    1998-03-01

    The paper industry has used IR cameras primarily for troubleshooting, where the most common examples include the examination of the condition of dryer fabrics and dryer cylinders and the analysis of moisture variations in a paper web. Another application extensively using IR thermography is non-destructive testing of composite materials. This paper presents some recently developed laboratory methods using an IR camera to examine paper structure. Specific areas include cockling, moisture content, thermal uniformity, mechanism of failure, and an analysis of the copying process.

  13. Infrared thermography examination of paper structure

    International Nuclear Information System (INIS)

    Kiiskinen, H.T.; Kukkonen, H.K.; Pakarinen, P.I.; Laine, A.J.

    1997-01-01

    The paper industry has used IR cameras primarily for troubleshooting, where the most common examples include the examination of the condition of dryer fabrics and dryer cylinders and the analysis of moisture variations in a paper web. Another application extensively using IR thermography is non-destructive testing of composite materials. This paper presents some recently developed laboratory methods using an IR camera to examine paper structure. Specific areas include cockling, moisture content, thermal uniformity, mechanism of failure, and an analysis of the copying process. (author)

  14. Recycling of Paper and Cardboard

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Damgaard, Anders

    2011-01-01

    waste. Recycling of paper and cardboard production waste and postconsumer waste has a long history in the pulp and paper industry. The recycled material now makes up more than half of the raw material used in European pulp and paper industry (ERPC, 2004). This chapter describes briefly how paper...... and cardboard are produced and how waste paper is recycled in the industry. Quality requirements and use of recycled products are discussed, as are the resource and environmental issues of paper recycling....

  15. Printability of Synthetic Papers by Electrophotography

    Directory of Open Access Journals (Sweden)

    Rozália Szentgyörgyvölgyi

    2010-04-01

    Full Text Available This paper deals with the printability of synthetic papers by the electrophotography technique. Prints of cmyk colour fields from 20% to 100% raster tone values were printed on three types of synthetic papers (one film synthetic paper and two fiber synthetic papers. The investigation of the appearance included densitometric measurement of the cmyk prints. The results have shown differences in the optical density and optical tone value between cmyk prints made on various synthetic papers. The highest optical density and the increase of the optical tone value were observed on the film synthetic paper, where cmyk prints were more saturated. The highest abrasion resistance of cmyk prints was obtained from the fibre synthetic paper.

  16. (including travel dates) Proposed itinerary

    Indian Academy of Sciences (India)

    Ashok

    31 July to 22 August 2012 (including travel dates). Proposed itinerary: Arrival in Bangalore on 1 August. 1-5 August: Bangalore, Karnataka. Suggested institutions: Indian Institute of Science, Bangalore. St Johns Medical College & Hospital, Bangalore. Jawaharlal Nehru Centre, Bangalore. 6-8 August: Chennai, TN.

  17. Waste paper as a biomass feedstock

    International Nuclear Information System (INIS)

    1993-09-01

    A study was undertaken to evaluate the availability and suitability of waste paper for conversion to biofuel in Canada and to examine the environmental impacts of waste paper processing. The total quantity of waste paper available in 1991 for each province and territory was determined and broken down into seven paper types. The total quantity across Canada was estimated at between 5.7 million and 7.6 million tonnes, of which old corrugated containers made up 23-26%. The variation in prices by waste paper type was also examined on a regional basis and a detailed analysis was made of the recent history of prices for several paper types. Waste paper prices have generally decreased, but since mid-1992, prices for certain types such as writing paper, computer output paper, and newsprint have increased steadily, partly due to increasing demand for recycled content in new paper. Utilization and disposal practices by region for waste paper generated in 1991, including recycling, conversion, and landfilling, were studied. National quantities of waste paper recycled, landfilled, and unavailable for recycling are estimated. The feasibility of using each type of waste paper as feedstock for each of three conversion processes (pyrolysis, incineration, fermentation) was examined. Scenarios were then developed for evaluating environmental impacts of each conversion technology. The environmental impacts of recycling, conversion, and landfilling practices are discussed qualitatively. 92 refs., 16 figs., 53 tabs

  18. Theory including future not excluded

    DEFF Research Database (Denmark)

    Nagao, K.; Nielsen, H.B.

    2013-01-01

    We study a complex action theory (CAT) whose path runs over not only past but also future. We show that, if we regard a matrix element defined in terms of the future state at time T and the past state at time TA as an expectation value in the CAT, then we are allowed to have the Heisenberg equation......, Ehrenfest's theorem, and the conserved probability current density. In addition,we showthat the expectation value at the present time t of a future-included theory for large T - t and large t - T corresponds to that of a future-not-included theory with a proper inner product for large t - T. Hence, the CAT...

  19. Selected papers on classical analysis

    CERN Document Server

    Nomizu, Katsumi

    2001-01-01

    This volume contains papers that originally appeared in Japanese in the journal Sūgaku. Ordinarily the papers would appear in the AMS translation of that journal, but to expedite publication, the Society has chosen to publish them as a volume of selected papers. The papers here are in the general area of mathematical analysis as it pertains to free probability theory.

  20. Consensus Paper: Cerebellum and Emotion.

    Science.gov (United States)

    Adamaszek, M; D'Agata, F; Ferrucci, R; Habas, C; Keulen, S; Kirkby, K C; Leggio, M; Mariën, P; Molinari, M; Moulton, E; Orsi, L; Van Overwalle, F; Papadelis, C; Priori, A; Sacchetti, B; Schutter, D J; Styliadis, C; Verhoeven, J

    2017-04-01

    Over the past three decades, insights into the role of the cerebellum in emotional processing have substantially increased. Indeed, methodological refinements in cerebellar lesion studies and major technological advancements in the field of neuroscience are in particular responsible to an exponential growth of knowledge on the topic. It is timely to review the available data and to critically evaluate the current status of the role of the cerebellum in emotion and related domains. The main aim of this article is to present an overview of current facts and ongoing debates relating to clinical, neuroimaging, and neurophysiological findings on the role of the cerebellum in key aspects of emotion. Experts in the field of cerebellar research discuss the range of cerebellar contributions to emotion in nine topics. Topics include the role of the cerebellum in perception and recognition, forwarding and encoding of emotional information, and the experience and regulation of emotional states in relation to motor, cognitive, and social behaviors. In addition, perspectives including cerebellar involvement in emotional learning, pain, emotional aspects of speech, and neuropsychiatric aspects of the cerebellum in mood disorders are briefly discussed. Results of this consensus paper illustrate how theory and empirical research have converged to produce a composite picture of brain topography, physiology, and function that establishes the role of the cerebellum in many aspects of emotional processing.

  1. Papers on vehicle size : cars and trucks

    Science.gov (United States)

    1988-06-01

    The four papers in this volume describe analyses of car size : trends and truck occupant injuries and fatalities. All four were : written between June 1985 and December 1987. The topics : addressed include where heavy truck accidents occur, injury an...

  2. Popullution: A Position Paper on Population.

    Science.gov (United States)

    Durner, Mary Beth

    This position paper presents an interdisciplinary approach to the study of population. Six main sections are included in the paper: Introduction, The Growth of the Human Population, The Psychological Effects of Population Growth, Overpopulated America, Myths Concerning Population Growth and Control, and Population Education. Section 1, an…

  3. Selected papers on analysis and related topics

    CERN Document Server

    2008-01-01

    This volume contains translations of papers that originally appeared in the Japanese journal Sūgaku. The papers range over a variety of topics, including operator algebras, analysis, and statistics. This volume is suitable for graduate students and research mathematicians interested in analysis and its applications.

  4. Resource Papers No. 4-12.

    Science.gov (United States)

    National Council for Resource Development, Washington, DC.

    This document compiles nine papers issued by the National Council for Resource Development. Papers include: (1) "How to Be Successful at Grantsmanship--Guidelines for Proposal Writing--Foundation Proposals"; (2) "A Federal Glossary" (acronyms); (3) "Special Projects" (a working model for an institutional development office); (4) "The Role of the…

  5. All-printed paper-based memory

    KAUST Repository

    He, Jr-Hau; Lin, Chun-Ho; Lien, Der-Hsien

    2016-01-01

    All-printed paper-based substrate memory devices are described which can be prepared by a process that includes coating, using a screen printer, one or more areas of a paper substrate (102) with a conductor material (104), such as a carbon paste

  6. Selected papers 1945-1980 - with commentary

    International Nuclear Information System (INIS)

    Chen Ning Yang.

    1983-01-01

    This volume consists of a collection of papers written by C. N. Yang and commentaries on them. Previously unpublished papers or those that appeared in journals which are not readily available are included. The commentaries are intended to trace his development as a scientist rather than evaluate the work

  7. Hygroscopic behaviour of paper and books

    DEFF Research Database (Denmark)

    Derluyn, Hannelore; Janssen, Hans; Diepens, Jan

    2007-01-01

    This study presents experimental analysis and numerical modeling of hygroscopic moisture buffering by paper and books. First, a literature review of moisture transport properties of paper is presented. Experimental work on two paper types includes SEM analysis of the paper structure, determination...... and not on the relative humidity. Books consist of several paper sheets with air layers between the sheets. To take the air layers into account, a parallel transport model is proposed to determine the effective moisture transport properties of books taking into account the air layers. The dynamic hygroscopic behavior...... of small book samples was measured. It is shown that, although the water vapor permeability of different paper types can be quite different, the effusivity of a book highly depends on the presence of the air layers and can therefore remain comparable for different paper types....

  8. Processing and Structure of Carbon Nanofiber Paper

    Directory of Open Access Journals (Sweden)

    Zhongfu Zhao

    2009-01-01

    Full Text Available A unique concept of making nanocomposites from carbon nanofiber paper was explored in this study. The essential element of this method was to design and manufacture carbon nanofiber paper with well-controlled and optimized network structure of carbon nanofibers. In this study, carbon nanofiber paper was prepared under various processing conditions, including different types of carbon nanofibers, solvents, dispersants, and acid treatment. The morphologies of carbon nanofibers within the nanofiber paper were characterized with scanning electron microscopy (SEM. In addition, the bulk densities of carbon nanofiber papers were measured. It was found that the densities and network structures of carbon nanofiber paper correlated to the dispersion quality of carbon nanofibers within the paper, which was significantly affected by papermaking process conditions.

  9. Evolution of the scientific paper

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E.

    1992-09-01

    The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper`s development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965-?).

  10. Device including a contact detector

    DEFF Research Database (Denmark)

    2011-01-01

    arms (12) may extend from the supporting body in co-planar relationship with the first surface. The plurality of cantilever arms (12) may extend substantially parallel to each other and each of the plurality of cantilever arms (12) may include an electrical conductive tip for contacting the area......The present invention relates to a probe for determining an electrical property of an area of a surface of a test sample, the probe is intended to be in a specific orientation relative to the test sample. The probe may comprise a supporting body defining a first surface. A plurality of cantilever...... of the test sample by movement of the probe relative to the surface of the test sample into the specific orientation.; The probe may further comprise a contact detector (14) extending from the supporting body arranged so as to contact the surface of the test sample prior to any one of the plurality...

  11. Neoclassical transport including collisional nonlinearity.

    Science.gov (United States)

    Candy, J; Belli, E A

    2011-06-10

    In the standard δf theory of neoclassical transport, the zeroth-order (Maxwellian) solution is obtained analytically via the solution of a nonlinear equation. The first-order correction δf is subsequently computed as the solution of a linear, inhomogeneous equation that includes the linearized Fokker-Planck collision operator. This equation admits analytic solutions only in extreme asymptotic limits (banana, plateau, Pfirsch-Schlüter), and so must be solved numerically for realistic plasma parameters. Recently, numerical codes have appeared which attempt to compute the total distribution f more accurately than in the standard ordering by retaining some nonlinear terms related to finite-orbit width, while simultaneously reusing some form of the linearized collision operator. In this work we show that higher-order corrections to the distribution function may be unphysical if collisional nonlinearities are ignored.

  12. Evolution of the scientific paper

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E.

    1992-01-01

    The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper's development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965- ).

  13. The Evolution of Paper Money

    OpenAIRE

    Levintal, Oren; Zeira, Joseph

    2009-01-01

    This paper tells the story of how paper money evolved as a result of lending by banks. While lending commodity money requires holding large reserves of commodity money to ensure liquidity, issuing convertible paper money reduces these costs significantly. The paper also examines the possibility of issuing inconvertible notes and shows that while they further reduce the cost of borrowing they also have adverse effects on the stability of the banking system. As a result, governments often inter...

  14. How to write scientific paper

    International Nuclear Information System (INIS)

    Kim, Si Jung

    1977-03-01

    This book introduces the essence of scientific paper, contents of paper, writing of manuscript, as well as research and analysis and arrangement of reference. It shows conditions of paper, kinds of paper, division and arrangement of content, title, author name, table of contents, abstracts, introduction, experimental materials and methods, results, consideration, conclusion, summary, acknowledgements, references. It also covers draft, quotation, footnotes and references, graphs and pictures, importance of literature research, how to find special literature, and analysis and arrangement of literature.

  15. Branding Malaysia in Research Papers

    International Nuclear Information System (INIS)

    Shaharum Ramli; Usang, M.D.

    2014-01-01

    Malaysian research results are world class and its research papers are read all over the world. With this visibility, some elements in the papers should be localized so that the readers know that this is the work of Malaysians. This paper discusses two elements for example statement of authors name and preparation of diagrams. (author)

  16. All-printed paper memory

    KAUST Repository

    He, Jr-Hau; Lin, Chun-Ho; Lien, Der-Hsien

    2016-01-01

    All-printed paper-based substrate memory devices are described. In an embodiment, a paper-based memory device is prepared by coating one or more areas of a paper substrate with a conductor material such as a carbon paste, to form a first electrode

  17. 47th ANZAAS Congress (abstracts) Vol. I, Sections 1-18

    Energy Technology Data Exchange (ETDEWEB)

    1976-01-01

    Abstracts are included for approximately 250 papers. The subject areas covered by the papers include the following: (1) physics, (2) chemistry, (3) geology, (4) architecture and town planning, (5) pharmaceutical sciences, (6) optometry, (7) zoology, (8) botany, (9) agriculture and forestry, (10) physiology, and (11) food science and nutrition. An author index is included. (MOW)

  18. Scientific projection paper for genetics

    International Nuclear Information System (INIS)

    Grahn, D.

    1980-01-01

    This Projection Paper is in two parts. The first is a general discussion of current knowledge and the present basis of radiation protection policy, the rather dismal prospects in the foreseeable future of getting realistic estimates of the human impact of radiation-induced mutation, and some general remarks about radiation standards and research strategy. The second part deals with specific research projects that might increase basic knowledge and narrow the gap between what is needed and what is known. We should emphasize at the outset that, of all environmental hazards, radiation is one whose genetic effects are best understood. There is good information on the dose-response curve, on the effects of dose rate and fractionation, and on the differential sensitivity of different ages, sexes and cell stages. This includes a great deal of knowledge of one organism closely related to man, the mouse. This information has been the basis for risk assessment and for safety standards that are widely accepted as solidly based

  19. Should Broca's area include Brodmann area 47?

    Science.gov (United States)

    Ardila, Alfredo; Bernal, Byron; Rosselli, Monica

    2017-02-01

    Understanding brain organization of speech production has been a principal goal of neuroscience. Historically, brain speech production has been associated with so-called Broca’s area (Brodmann area –BA- 44 and 45), however, modern neuroimaging developments suggest speech production is associated with networks rather than with areas. The purpose of this paper was to analyze the connectivity of BA47 ( pars orbitalis) in relation to language . A meta-analysis was conducted to assess the language network in which BA47 is involved. The Brainmap database was used. Twenty papers corresponding to 29 experimental conditions with a total of 373 subjects were included. Our results suggest that BA47 participates in a “frontal language production system” (or extended Broca’s system). The BA47  connectivity found is also concordant with a minor role in language semantics. BA47 plays a central role in the language production system.

  20. Paper Capillary Enables Effective Sampling for Microfluidic Paper Analytical Devices.

    Science.gov (United States)

    Shangguan, Jin-Wen; Liu, Yu; Wang, Sha; Hou, Yun-Xuan; Xu, Bi-Yi; Xu, Jing-Juan; Chen, Hong-Yuan

    2018-06-06

    Paper capillary is introduced to enable effective sampling on microfluidic paper analytical devices. By coupling mac-roscale capillary force of paper capillary and microscale capillary forces of native paper, fluid transport can be flexibly tailored with proper design. Subsequently, a hybrid-fluid-mode paper capillary device was proposed, which enables fast and reliable sampling in an arrayed form, with less surface adsorption and bias for different components. The resulting device thus well supports high throughput, quantitative, and repeatable assays all by hands operation. With all these merits, multiplex analysis of ions, proteins, and microbe have all been realized on this platform, which has paved the way to level-up analysis on μPADs.

  1. Nineteen papers on algebraic semigroups

    CERN Document Server

    Aizenshtat, A Ya; Podran, N E; Ponizovskii, IS; Shain, BM

    1988-01-01

    This volume contains papers selected by leading specialists in algebraic semigroups in the U.S., the United Kingdom, and Australia. Many of the papers strongly influenced the development of algebraic semigroups, but most were virtually unavailable outside the U.S.S.R. Written by some of the most prominent Soviet researchers in the field, the papers have a particular emphasis on semigroups of transformations. Boris Schein of the University of Arkansas is the translator.

  2. Vietnam; Poverty Reduction Strategy Paper

    OpenAIRE

    International Monetary Fund

    2004-01-01

    This paper assesses the Poverty Reduction Strategy Paper of Vietnam, known as the Comprehensive Poverty Reduction and Growth Strategy (CPRGS). It is an action program to achieve economic growth and poverty reduction objectives. This paper reviews the objectives and tasks of socio-economic development and poverty reduction. The government of Vietnam takes poverty reduction as a cutting-through objective in the process of country socio-economic development and declares its commitment to impleme...

  3. Results From PAPER/HERA

    Science.gov (United States)

    Pober, Jonathan C.

    2018-05-01

    The Precision Array for Probing the Epoch of Reionization (PAPER) was a first-generation 21 cm cosmology experiment with the specific goal of detecting the power spectrum of the 21 cm emission from the Epoch of Reionization. Analysis of PAPER data is still ongoing, but lessons learned from PAPER to date have played a critical role in designing the next-generation Hydrogen Epoch of Reionization Array (HERA) experiment. This article reviews five key design choices made by PAPER: use of a non-imaging configuration, redundancy, short baselines, small antenna elements, and a large instantaneous bandwidth. We describe the impact of these choices and the role they played in designing HERA.

  4. English for writing research papers

    National Research Council Canada - National Science Library

    Wallwork, Adrian

    2011-01-01

    ... points when you write more papers in the future. The useful phrases in Chap. 19 will help you to structure your paper and give you an indication of the typical coverage of each section. I have written many papers before. Will I still learn something from this book? If you have ever had a paper rejected due to poor English, poor structure or poor readability, then this book will certainly help you. What are the three most important things I will learn from this book? This book is based on three fund...

  5. Radiation treatment of waste papers

    International Nuclear Information System (INIS)

    Kumakura, Minoru; Kaetsu, Isao

    1982-01-01

    The effect of irradiation on enzymatic hydrolysis of waste papers was studied. The sugar yield increased with increasing irradiation dose. In irradiation of deligninized paper, no acceleration of enzymatic hydrolysis was observed. Degradation of cellulose molecules in paper by irradiation was examined by measurements of degree of polymerization and of potential reducing sugar. It was found in enzymatic hydrolysis that oligosaccharides such as celobiose were produced by irradiation. In irradiation of waste papers in catbon dioxide atmosphere, the glucose yield during enzymatic hydrolysis increased with increasing carbon dioxide gas pressure. (author)

  6. Flexible and foldable paper-substrate thermoelectric generator (teg)

    KAUST Repository

    Rojas, Jhonathan Prieto

    2017-08-24

    Flexible and foldable paper-substrate thermoelectric generators (TEGs) and methods for making the paper-substrate TEGs are disclosed. A method includes depositing a plurality of thermocouples in series on a paper substrate to create a paper-substrate TEG, wherein the plurality of thermocouples is deposited between two contact points of the paper-substrate TEG. The method may also include setting the power density and maximum achievable temperature gradient of the paper-substrate TEG by folding the paper-substrate TEG. A paper-substrate TEG apparatus may include a paper substrate and a plurality of thermocouples deposited in series on the paper substrate between two contact points of the paper-substrate TEG, wherein the power density and maximum achievable temperature gradient of the paper-substrate TEG is set by folding the paper-substrate TEG.

  7. Paper recycling and social policy. [United Kingdom

    Energy Technology Data Exchange (ETDEWEB)

    Turner, R K; Grace, R

    1976-12-01

    The most promising new source of paper for recycling is the household and small commercial business, whose waste papers can be processed if the paper and board industry is willing to invest capital to develop the facilities and the technology needed to upgrade indigenous fibers. Cost-benefit analyses in the United Kingdom indicate that support of this type of paper recycling has more merit than a buffer stock scheme. Efforts to conserve virgin materials by increasing the use of secondary materials could be further strengthened by taxes on the disposal of virgin materials. Paper recycling policies should include a range of sources, from discarded post-consumer waste paper and boxes to the release and use of energy by incineration, pyrolysis, and hydrolysis. Waste availability is influenced by product durability, replacement by other products (such as plastic wrap for paper), industry maturity, and social attitudes. Public acceptance of lower-quality paper products and improved technology to remove ink and color should combine to make recycling more feasible. Efforts to develop the household and commercial sector will result in lower import requirements for wood pulp and an improved balance of payments for the United Kingdom. Recycled fibers require less water and energy to process, but the process wastes introduce environmental pollutants. Short- and long-term forecasts show a growth rate trend that varies with paper grade and corresponds with general economic growth. (35 references) (DCK)

  8. Recent Advances in Paper-Based Sensors

    Directory of Open Access Journals (Sweden)

    Edith Chow

    2012-08-01

    Full Text Available Paper-based sensors are a new alternative technology for fabricating simple, low-cost, portable and disposable analytical devices for many application areas including clinical diagnosis, food quality control and environmental monitoring. The unique properties of paper which allow passive liquid transport and compatibility with chemicals/biochemicals are the main advantages of using paper as a sensing platform. Depending on the main goal to be achieved in paper-based sensors, the fabrication methods and the analysis techniques can be tuned to fulfill the needs of the end-user. Current paper-based sensors are focused on microfluidic delivery of solution to the detection site whereas more advanced designs involve complex 3-D geometries based on the same microfluidic principles. Although paper-based sensors are very promising, they still suffer from certain limitations such as accuracy and sensitivity. However, it is anticipated that in the future, with advances in fabrication and analytical techniques, that there will be more new and innovative developments in paper-based sensors. These sensors could better meet the current objectives of a viable low-cost and portable device in addition to offering high sensitivity and selectivity, and multiple analyte discrimination. This paper is a review of recent advances in paper-based sensors and covers the following topics: existing fabrication techniques, analytical methods and application areas. Finally, the present challenges and future outlooks are discussed.

  9. Working Paper on Social capital

    DEFF Research Database (Denmark)

    Lassen Hanan, Anne

    This paper outlines the major schools within social capital theory. Contemporary authors such as Coleman, Putnam and Bourdieu are elaborated on. The paper also presents a non-exhaustive review on studies of social capital. Furthermore, a criticial discussion on social capital is reviewed, before...

  10. Moral Cognitivism | Lillehammer | Philosophical Papers

    African Journals Online (AJOL)

    The paper explicates a set of criteria the joint satisfaction of which is taken to qualify moral judgements as cognitive. The paper examines evidence that some moral judgements meet these criteria, and relates the resulting conception of moral judgements to ongoing controversies about cognitivism in ethics. Philosophical ...

  11. Paper Airplanes: A Classroom Activity

    Science.gov (United States)

    Painter, Richard A.

    1976-01-01

    A learning experience is described for upper elementary or junior high students involving the manufacture, transportation, and marketing of a product for consumers. Steps are given and roles are assigned for students to convert raw material (paper) to a finished product (paper airplanes) and to sell it. (AV)

  12. Street Papers, Work, and Begging

    DEFF Research Database (Denmark)

    Cockburn, Patrick Joseph

    2014-01-01

    Street papers are publications produced specifically for sale by the homeless and other vulnerable people in many countries around the world. Their social status is, however, often conspicuously unstable: ‘Get a job!’ has been reported as a common insult addressed to vendors, and street paper...

  13. IDEA papers special number 1

    International Nuclear Information System (INIS)

    Mercadie, J.L.

    2003-06-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA papers provides information such as, meeting, Internet addresses and programs. This paper is specially devoted to the environment. (A.L.B.)

  14. Einstein's first paper on relativity

    International Nuclear Information System (INIS)

    Schwartz, H.M.

    1977-01-01

    Because of its exceptional significance in the history of great ideas in science, Einstein's first paper on relativity, especially its first part, deserves a more careful translation into English than presently exists. A new and annotated translation of this first part is presented here, together with a brief discussion of certain aspects of Einstein's paper

  15. Other relevant numerical modelling papers

    International Nuclear Information System (INIS)

    Chartier, M.

    1989-01-01

    The ocean modelling is a rapidly evolving science and a large number of results have been published. Several categories of papers are of particular interest for this review: the papers published by the international atomic institutions, such as the NEA (for the CRESP or Subseabed Programs), the IAEA (for example the Safety Series, the Technical Report Series or the TECDOC), and the ICRP, and the papers concerned by more fundamental research, which are published in specific scientific literature. This paper aims to list some of the most relevant publications for the CRESP purposes. It means by no way to be exhaustive, but informative on the incontestable progress recently achieved in that field. One should note that some of these papers are so recent that their final version has not yet been published

  16. Paper reutilization to manufacture plasterboard

    International Nuclear Information System (INIS)

    Calixto, M.K.; Medeiros, I.A.; Lima, R.C.; Araujo, Y.C.F.; Lima, E.M.C. de

    2016-01-01

    The changes in the planet have accelerated the discussion about environmental preservation and the pursuit for sustainable solutions aiming the human development. In the civil construction, the residue recovery, not only contribute to sustainability but also relieves the consumption of raw material and for all this the search for new products in this new twist is in the center of global technological research. The goal of this work is to obtain plasterboard incorporating discarded paper in the educational environment. In this study, the plaster was characterized initially by X-ray diffraction and thermals analysis (TG e DTA). It was prepared a paste of plaster and processed paper varying the paper amount in two proportions with 10% and 50% respectively, and was utilized the plaster/water factor equals to 0,7. The plaster - paper mixtures were characterized about the setting time and compressive strength. The results indicated that the increase in paper content led to the decreased resistance. (author)

  17. Introduction to the Paper Symposium

    Science.gov (United States)

    Carpenter, D. K.

    1996-05-01

    . For this system, they argued, the criterion deltaG Schomaker and Waser (1), or zero (or almost so), as argued by Tykodi (2)? This led to concerns by Noyes about how the pressure should be defined (3) and by Wood and Battino that it is not appropriate to utilize the Gibbs function in describing the Bates process (4). The various authors not only disagreed, sometimes sharply, on these matters but eventually carried the discussion into related but somewhat more distant areas including the following: The role of the container walls, which experience a change in the differential pressure on the inside and outside surfaces (5). The question of whether it is possible to define a Gibbs function for anisotropic solids (6) and if it is, how it should be done (5,7). The use of "Global" intensive properties (in particular pressure) of the surroundings to characterize a system in which such properties may not be uniform (5). The relationship of the variance (in the sense of the phase rule) of a system to its most appropriate thermodynamic function (4). A historical issue--exactly what did J. W. Gibbs say regarding the definition of a Gibbs function for systems in which the pressure was not uniform and/or there were anisotropic solids present (5-7)? When it finally became apparent that there was to be no resolution of the disputed points it was decided to publish the papers in the present form, which allows each contributor to make his positions as forcefully and clearly as possible, along with his assessment of the deficiencies of the other papers as seen from his own perspective. Bearing in mind that although the set of papers originally had as basis the "expansion of ether into a vacuum" problem, the set of questions and the interests eventually addressed by the various authors diverged somewhat as discussion proceeded. Here we merely point out some of the main issues addressed in the four papers in order to guide the reader to a quicker path to reading them in context. Some

  18. Quantum interaction. Revised selected papers

    Energy Technology Data Exchange (ETDEWEB)

    Song, Dawei; Zhang, Peng; Wang, Lei [Aberdeen Univ. (United Kingdom). School of Computing; Melucci, Massimo [Padua Univ., Padova (Italy). Dept. of Information Engineering; Frommholz, Ingo [Bedfordshire Univ. (United Kingdom); Arafat, Sachi (eds.) [Glasgow Univ. (United Kingdom). School of Computing Science

    2011-07-01

    This book constitutes the thoroughly refereed post-conference proceedings of the 5th International Symposium on Quantum Interaction, QI 2011, held in Aberdeen, UK, in June 2011. The 26 revised full papers and 6 revised poster papers, presented together with 1 tutorial and 1 invited talk were carefully reviewed and selected from numerous submissions during two rounds of reviewing and improvement. The papers show the cross-disciplinary nature of quantum interaction covering topics such as computation, cognition, mechanics, social interaction, semantic space and information representation and retrieval. (orig.)

  19. Quantum interaction. Revised selected papers

    International Nuclear Information System (INIS)

    Song, Dawei; Zhang, Peng; Wang, Lei; Arafat, Sachi

    2011-01-01

    This book constitutes the thoroughly refereed post-conference proceedings of the 5th International Symposium on Quantum Interaction, QI 2011, held in Aberdeen, UK, in June 2011. The 26 revised full papers and 6 revised poster papers, presented together with 1 tutorial and 1 invited talk were carefully reviewed and selected from numerous submissions during two rounds of reviewing and improvement. The papers show the cross-disciplinary nature of quantum interaction covering topics such as computation, cognition, mechanics, social interaction, semantic space and information representation and retrieval. (orig.)

  20. Fundamental papers in wavelet theory

    CERN Document Server

    Walnut, David F

    2006-01-01

    This book traces the prehistory and initial development of wavelet theory, a discipline that has had a profound impact on mathematics, physics, and engineering. Interchanges between these fields during the last fifteen years have led to a number of advances in applications such as image compression, turbulence, machine vision, radar, and earthquake prediction. This book contains the seminal papers that presented the ideas from which wavelet theory evolved, as well as those major papers that developed the theory into its current form. These papers originated in a variety of journals from differ

  1. Electronic publishing of SPE papers

    International Nuclear Information System (INIS)

    Perdue, J.M.

    1992-01-01

    This paper reports that the SPE is creating an electronic index to over 25,000 technical papers and will produce a CD-ROM as an initial product. This SPE CD-ROM Masterdisc will be available at the SPE Annual Meeting in Washington, D.C. on October 4-7, 1992. The SPE Board has appointed an Ad Hoc Committee on Electronic Publishing to coordinate and oversee this project and to recommend authoring standards for submitting SPE papers electronically in the future

  2. Collected papers of P. L. Kapitza

    CERN Document Server

    Kapitsa, Petr Leonidovich

    Collected Papers of P. L. Kapitza, Volume I compiles the scientific papers written between 1916 and 1934 by Piotr Leonidovich Kapitza, a leading Soviet physicist and Nobel laureate. This book begins by introducing the life and career of P. L. Kapitza, which includes his studies and investigations of nuclear physics, strong magnetic fields, liquefaction, liquid helium, and high-power electronics. Other topics discussed include electron inertia in molecular ampere currents; Koch recording microphotometer; metallic conductivity and its change in a magnetic field; and methods of experimenting in s

  3. FY 1989 scientific and technical reports, articles, papers, and presentations

    Science.gov (United States)

    Turner, Joyce E. (Compiler)

    1989-01-01

    A compendium of bibliographic references to papers presented by Marshall Space Flight Center (MSFC) personnel and contractors during FY 1989 is provided. The papers include formal NASA technical reports, memoranda, papers which were published in technical journals, and presentations by MSFC personnel. The formal NASA technical reports and memoranda have abstracts included. Sources for obtaining these documents are also included.

  4. Stellenbosch Papers in Linguistics Plus

    African Journals Online (AJOL)

    Stellenbosch Papers in Linguistics Plus. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 42 (2013) >. Log in or Register to get access to full text downloads.

  5. Stellenbosch Papers in Linguistics Plus

    African Journals Online (AJOL)

    Stellenbosch Papers in Linguistics Plus. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 27 (1995) >. Log in or Register to get access to full text downloads.

  6. Genealogical Trees of Scientific Papers.

    Science.gov (United States)

    Waumans, Michaël Charles; Bersini, Hugues

    2016-01-01

    Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a "dying" paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing "offspring". Practically, this might be used to trace the successive published milestones of a research field.

  7. Industrial radiography on radiographic paper

    International Nuclear Information System (INIS)

    Domanus, J.C.

    1977-11-01

    An investigation was performed to compare the quality of radiographic paper with that of X-ray film, after a review had been made of the rather scarce literature on the subject. The equipment used throughout the investigation is described, and characteristic curves for Agfa-Gevaert and Kodak papers exposed with different intensifying screens in the low and intermediate voltage range are reproduced. The relative speed, contrast and exposure latitude were computed from these curves. The quality of the radiographic image was checked on U/Al blocks and plates, Al and Fe blocks, and fiber-reinforced composites. Exposure charts for Al and Fe were made for various paper and screen combinations. Both the sharpness of the radiographic image as well as the influence of processing on speed and contrast were checked. Examples are given of the practical application of the paper for radiography of castings, weldings, solderings, assemblies, etc. (author)

  8. The Blue Box White Paper

    OpenAIRE

    Tippett, Benjamin K; Tsang, David

    2013-01-01

    This white paper is an explanation of Ben and Dave's TARDIS time machine, written for laypeople who are interested in time travel, but have no technical knowledge of Einstein's Theory of General Relativity. The first part of this paper is an introduction to the pertinent ideas from Einstein's theory of curved spacetime, followed by a review of other popular time machine spacetimes. We begin with an introduction to curvature and lightcones. We then explain the Alcubierre Warp Drive, the Morris...

  9. All-printed paper memory

    KAUST Repository

    Lien, Derhsien

    2014-08-26

    We report the memory device on paper by means of an all-printing approach. Using a sequence of inkjet and screen-printing techniques, a simple metal-insulator-metal device structure is fabricated on paper as a resistive random access memory with a potential to reach gigabyte capacities on an A4 paper. The printed-paper-based memory devices (PPMDs) exhibit reproducible switching endurance, reliable retention, tunable memory window, and the capability to operate under extreme bending conditions. In addition, the PBMD can be labeled on electronics or living objects for multifunctional, wearable, on-skin, and biocompatible applications. The disposability and the high-security data storage of the paper-based memory are also demonstrated to show the ease of data handling, which are not achievable for regular silicon-based electronic devices. We envision that the PPMDs manufactured by this cost-effective and time-efficient all-printing approach would be a key electronic component to fully activate a paper-based circuit and can be directly implemented in medical biosensors, multifunctional devices, and self-powered systems. © 2014 American Chemical Society.

  10. Life cycle assessment of waste paper management

    DEFF Research Database (Denmark)

    Merrild, Hanna Kristina; Damgaard, Anders; Christensen, Thomas Højlund

    2008-01-01

    The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing oil global warming potentials. The consequence of choosing...... results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system...... a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate Was Studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved...

  11. Rabi N. Bhattacharya selected papers

    CERN Document Server

    Waymire, Edward

    2016-01-01

    This volume presents some of the most influential papers published by Rabi N. Bhattacharya, along with commentaries from international experts, demonstrating his knowledge, insight, and influence in the field of probability and its applications. For more than three decades, Bhattacharya has made significant contributions in areas ranging from theoretical statistics via analytical probability theory, Markov processes, and random dynamics to applied topics in statistics, economics, and geophysics. Selected reprints of Bhattacharya’s papers are divided into three sections: Modes of Approximation, Large Times for Markov Processes, and Stochastic Foundations in Applied Sciences. The accompanying articles by the contributing authors not only help to position his work in the context of other achievements, but also provide a unique assessment of the state of their individual fields, both historically and for the next generation of researchers. Rabi N. Bhattacharya: Selected Papers will be a valuable resource for yo...

  12. Adhoccery in Epistemology | Brogaard | Philosophical Papers

    African Journals Online (AJOL)

    The most serious difficulty is that of providing criteria for when a rival alternative to a claim is relevant. Without such criteria, the theory is ad hoc. I argue that most other externalist theories of knowledge, including Sosa's own, fall victim to this criticism. At the end of the paper I make a suggestion as to why Sosa's objection ...

  13. Twitter Conversation Patterns Related to Research Papers

    Science.gov (United States)

    Nelhans, Gustaf; Lorentzen, David Gunnarsson

    2016-01-01

    Introduction: This paper deals with what academic texts and datasets are referred to and discussed on Twitter. We used document object identifiers as references to these items. Method: We streamed tweets from the Twitter application programming interface including the strings "dx" and "doi" while simultaneously streaming tweets…

  14. The Fail-Safe Micro Research Paper.

    Science.gov (United States)

    Saunders, Mary Anne

    A key element in a research paper writing assignment modified for students of English as a second language to assure their success is teacher control over most of the process. A chronological plan for action for the micro research project includes these steps: creating an awareness of current events and controversial issues, practicing necessary…

  15. Review paper on wind turbine aerodynamics

    DEFF Research Database (Denmark)

    Hansen, Martin Otto Laver; Aagaard Madsen, Helge

    2011-01-01

    The paper describes the development and description of the aerodynamic models used to estimate the aerodynamic loads on wind turbine constructions. This includes a status of the capabilities of computation fluid dynamics and the need for reliable airfoil data for the simpler engineering models...

  16. Impact papers on aging in 2009

    DEFF Research Database (Denmark)

    Blagosklonny, Mikhail V; Campisi, Judy; Sinclair, David A

    2010-01-01

    The Editorial Board of Aging reviews research papers published in 2009, which they believe have or will have significant impact on aging research. Among many others, the topics include genes that accelerate aging or in contrast promote longevity in model organisms, DNA damage responses and telome...

  17. Paper-based plasma sanitizers.

    Science.gov (United States)

    Xie, Jingjin; Chen, Qiang; Suresh, Poornima; Roy, Subrata; White, James F; Mazzeo, Aaron D

    2017-05-16

    This work describes disposable plasma generators made from metallized paper. The fabricated plasma generators with layered and patterned sheets of paper provide a simple and flexible format for dielectric barrier discharge to create atmospheric plasma without an applied vacuum. The porosity of paper allows gas to permeate its bulk volume and fuel plasma, while plasma-induced forced convection cools the substrate. When electrically driven with oscillating peak-to-peak potentials of ±1 to ±10 kV, the paper-based devices produced both volume and surface plasmas capable of killing microbes. The plasma sanitizers deactivated greater than 99% of Saccharomyces cerevisiae and greater than 99.9% of Escherichia coli cells with 30 s of noncontact treatment. Characterization of plasma generated from the sanitizers revealed a detectable level of UV-C (1.9 nW⋅cm -2 ⋅nm -1 ), modest surface temperature (60 °C with 60 s of activation), and a high level of ozone (13 ppm with 60 s of activation). These results deliver insights into the mechanisms and suitability of paper-based substrates for active antimicrobial sanitization with scalable, flexible sheets. In addition, this work shows how paper-based generators are conformable to curved surfaces, appropriate for kirigami-like "stretchy" structures, compatible with user interfaces, and suitable for sanitization of microbes aerosolized onto a surface. In general, these disposable plasma generators represent progress toward biodegradable devices based on flexible renewable materials, which may impact the future design of protective garments, skin-like sensors for robots or prosthetics, and user interfaces in contaminated environments.

  18. Methane from waste containing paper

    Energy Technology Data Exchange (ETDEWEB)

    1981-12-24

    Waste solids containing paper are biologically treated in a system by: fermentation with lactobacilli, separation of the solids, ion exchange of the supernatant from the separation, anaerobic digestion of the ion-exchanged liquor, separation of a liquor from the fermentation, and digestion of the liquor. Thus, a municipal waste containing paper and water was inoculated with Aspergillus niger and lactobacilli for 2 days; the mixture was anaerobically treated and centrifuged; the clear liquor was ion exchanged; and the solid waste was filter pressed. The filter cake was treated with Trichoderma nigricaus and filtered. The filtrate and the ion-exchanged liquor were digested for CH/sub 4/ production.

  19. Spring 1991 Meeting outstanding papers

    Science.gov (United States)

    The Atmospheric Sciences Committee has presented Kaye Brubaker and Jichun Shi with Outstanding Student Paper awards for presentations given at the AGU 1991 Spring Meeting, held in Baltimore May 28-31.Brubaker's paper, “Precipitation Recycling Estimated from Atmospheric Data,” presented quantitative estimates of the contribution of locallyevaporated moisture to precipitation over several large continental regions. Recycled precipitation is defined as water that evaporates from the land surface of a specified region and falls again as precipitation within the region. Brubaker applied a control volume analysis based on a model proposed by Budyko.

  20. Science projection paper overview report

    International Nuclear Information System (INIS)

    Lasser, E.

    1980-01-01

    This paper is comprised of a large number of position papers that describe current research and potential areas for future research in the field of diagnostic procedures. There are few specific recommendations that can be made for research to identify biological effects below one rod in populations exposed to diagnostic radiological imaging. It is the conclusion of the author that if radiology is practiced according to the state-of-the-art, then it has been responsive to the implications of biological effects whether the effects adhere to the linear hypothesis or vary from it

  1. IAEA paper on institutional arrangements

    International Nuclear Information System (INIS)

    1979-01-01

    At its fifth series of meetings, Working Group 3 received a background paper prepared by the IAEA which had a threefold purpose: firstly, to provide an overview on institutional arrangements under consideration by the INFCE Working Groups; secondly, to explore potential relationships between the various institutional arrangements under consideration; and thirdly, to identify areas where further analysis might be desirable

  2. Scientific papers: A new paradigm

    Science.gov (United States)

    Reid, George C.

    The problem of how to organize and write a scientific paper is a very basic one for most of us. A scientific paper is, after all, the only tangible product of a research scientist and, like all products, will be a failure if not marketed properly to reach its potential buyers. I think that a lack of attention to this “marketing and sales” aspect of research is a serious fault in our community, by which I mean those of us who publish in AGU journals.The potential audience for a scientific paper can be divided roughly into three distinct categories. The first group is usually rather small in number, consisting of fellow scientists working in a very closely related field, and to whom the details of the work are of major importance. The second group is also fellow scientists, but their interest is less sharply focused, and they are concerned with the broad outlines of the work and essential results. The third group is the sponsors and the people who actually pay for the work, whose interest in the details is minimal and they, sadly enough, are often concerned only with the fact that a paper has been published rather than its content.

  3. The IDEA papers no 4

    International Nuclear Information System (INIS)

    Laurent, J.

    2003-01-01

    The Information network on the Economic Development in Aquitaine (IDEA) aims to collect and spread the environmental information concerning the Aquitaine, in order to implement an observatory of the regional environment and of the sustainable development. The IDEA paper no. 4 presents the point of view of some participants to the third national meeting of the environment observatories. (A.L.B.)

  4. Ethanol from mixed waste paper

    International Nuclear Information System (INIS)

    Kerstetter, J.D.; Lyons, J.K.

    1991-01-01

    The technology, markets, and economics for converting mixed waste paper to ethanol in Washington were assessed. The status of enzymatic and acid hydrolysis projects were reviewed. The market for ethanol blended fuels in Washington shows room for expansion. The economics for a hypothetical plant using enzymatic hydrolysis were shown to be profitable

  5. Stellenbosch Papers in Linguistics: Submissions

    African Journals Online (AJOL)

    Author Guidelines. Contributors are requested to submit their manuscripts as Word documents (.doc or .docx) in the following format: Paper size: A4. Top and bottom margins: 3 cm. Left-hand side and right-hand side margins: 2.5 cm. Line spacing: single (no additional space before or after paragraphs). Font: Times New ...

  6. Collected Papers of Srinivasa Ramanujan

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 18; Issue 9. Collected Papers of Srinivasa Ramanujan. J E Littlewood. Classics Volume 18 Issue 9 September 2013 pp 859-865. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/018/09/0859-0865 ...

  7. Believing Badly | Cox | Philosophical Papers

    African Journals Online (AJOL)

    This paper explores the grounds upon which moral judgment of a person's beliefs is properly made. The beliefs in question are non-moral beliefs and the objects of moral judgment are individual instances of believing. We argue that instances of believing may be morally wrong on any of three distinct grounds: (i) by ...

  8. All-printed paper memory

    KAUST Repository

    Lien, Derhsien; Kao, Zhenkai; Huang, Tenghan; Liao, Yingchih; Lee, Sichen; He, Jr-Hau

    2014-01-01

    . In addition, the PBMD can be labeled on electronics or living objects for multifunctional, wearable, on-skin, and biocompatible applications. The disposability and the high-security data storage of the paper-based memory are also demonstrated to show the ease

  9. Fifteen papers on functional analysis

    CERN Document Server

    Allakhverdiev, B P; Fainshtein, A S; Khelemskii, AYa; Klenina, LI

    1984-01-01

    The papers in this volume cover topics on functional analysis. They have been selected, translated, and edited from publications not otherwise translated into English under the auspices of the AMS-ASL-IMS Committee on Translations from Russian and Other Foreign Languages.

  10. Eleven papers on differential equations

    CERN Document Server

    Akhmedov, S A; Berezanskii, Yu M; Bazalii, B V; Berezanskii, Yu M

    1985-01-01

    The papers in this volume, like those in the previous one, have been selected, translated, and edited from publications not otherwise translated into English under the auspices of the AMS-ASL-IMS Committee on Translations from Russian and Other Foreign Languages.

  11. Educational Choice. A Background Paper.

    Science.gov (United States)

    Quality Education for Minorities Network, Washington, DC.

    This paper addresses school choice, one proposal to address parental involvement concerns, focusing on historical background, definitions, rationale for advocating choice, implementation strategies, and implications for minorities and low-income families. In the past, transfer payment programs such as tuition tax credits and vouchers were…

  12. Discussion on Papers 11 - 13

    International Nuclear Information System (INIS)

    Haws, E.; Matthews, M.E.; Wilson, E.M.; Charles-Jones, S.; Allen, R.F.; Young, R.M.; O'Connor, B.

    1992-01-01

    The discussion covered the following topics: the nature of boulder clay for foundations; navigation through the barrage; the construction of sluice caissons; government subsidies for construction costs; the effect of wave action on river banks; allowances for reflected energy in hydrodynamic models; water quality in impounded pools; sediment deposition. Separate abstracts have been prepared for the three papers under discussion. (UK)

  13. Paper mechanisms for sonic interaction

    DEFF Research Database (Denmark)

    Delle Monache, Stefano; Rocchesso, Davide; Qi, Ji

    2012-01-01

    Introducing continuous sonic interaction in augmented pop-up books enhances the expressive and performative qualities of movables, making the whole narrative experience more engaging and personal. The SaMPL Spring School on Sounding Popables explored the specific topic of paper-driven sonic...

  14. Shale Gas Technology. White Paper

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-09-15

    Shale gas is extracted using horizontal drilling and hydraulic fracturing or 'fracking'. None of which are particularly new technologies or shale gas specific. In this white paper attention is paid to Horizontal drilling; Hydraulic fracturing or 'frackin'; Other 'unconventionals'; and Costs.

  15. Topical papers on raw materials

    International Nuclear Information System (INIS)

    1978-01-01

    In the papers of this working group, the availability of uranium and the long-term supply situation for this raw material are discussed. A problem closely connected with uranium supply are the commercial contracts and their particularities. The points of view of the reporting countries of Great Britain, South Africa, Switzerland, Australia, Japan, and Korea are made clear

  16. Shale Gas Technology. White Paper

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-09-15

    Shale gas is extracted using horizontal drilling and hydraulic fracturing or 'fracking'. None of which are particularly new technologies or shale gas specific. In this white paper attention is paid to Horizontal drilling; Hydraulic fracturing or 'frackin'; Other 'unconventionals'; and Costs.

  17. Nerdfighters, "Paper Towns," and heterotopia

    Directory of Open Access Journals (Sweden)

    Lili Wilkinson

    2012-06-01

    Full Text Available Socially and politically controlled teenagers find emancipatory spaces in young adult (YA literature, spaces where institutions can be challenged and individuals can gain agency and empowerment. Drawing on Foucault's theory of heterotopia, I examine the literary spaces in John Green's YA novel Paper Towns and examine how Green's online social networking community Nerdfighters shares an ideological common ground with the novel.

  18. Overview paper on nuclear power

    International Nuclear Information System (INIS)

    Spiewak, I.; Cope, D.F.

    1980-09-01

    This paper was prepared as an input to ORNL's Strategic Planning Activity, ORNL National Energy Perspective (ONEP). It is intended to provide historical background on nuclear power, an analysis of the mission of nuclear power, a discussion of the issues, the technology choices, and the suggestion of a strategy for encouraging further growth of nuclear power

  19. Gas Mitigation in Paper Production

    Science.gov (United States)

    Santos, AS; Bittencourt, C.

    2017-07-01

    The Brazilian paper industry has competitive advantages offered by the favorable climate, which favors an increase in the yield of forest restoration, and consequently, in the productive process. On the other hand, following the greenhouse gases (GHG), we can see our constantly changing sun, causing the solar storms, allowing their prevention or mitigating measures. The objective of this work is to contribute to the construction of the understanding necessary for the reduction of GHG emission from a preliminary analysis of the pulp and paper sector. As a secondary objective, the text preliminarily analyzes a company’s behavior against the backdrop of the Paris Accord, which strengthens the global response to the threat of climate change and strengthens the capacity of countries to deal with the impacts of such changes. The identification of best practices in the pulp and paper industry is understood, focusing on environmental sustainability, such as the adoption of reforestation, obtaining significant results. In the case of the paper industry, the management of public forests for sustainable production, within the structure of the Ministry of the Environment, establishes the promotion of public awareness about the importance of conservation, recovery and sustainable management of forest resources.

  20. Bio-Based Coatings for Paper Applications

    Directory of Open Access Journals (Sweden)

    Vibhore Kumar Rastogi

    2015-11-01

    Full Text Available The barrier resistance and wettability of papers are commonly controlled by the application of petroleum-based derivatives such as polyethylene, waxes and/or fluor- derivatives as coating. While surface hydrophobicity is improved by employing these polymers, they have become disfavored due to limitations in fossil-oil resources, poor recyclability, and environmental concerns on generated waste with lack of biodegradation. Alternatively, biopolymers including polysaccharides, proteins, lipids and polyesters can be used to formulate new pathways for fully bio-based paper coatings. However, difficulties in processing of most biopolymers may arise due to hydrophilicity, crystallization behavior, brittleness or melt instabilities that hinder a full exploitation at industrial scale. Therefore, blending with other biopolymers, plasticizers and compatibilizers is advantageous to improve the coating performance. In this paper, an overview of barrier properties and processing of bio-based polymers and their composites as paper coating will be discussed. In particular, recent technical advances in nanotechnological routes for bio-based nano- composite coatings will be summarized, including the use of biopolymer nanoparticles, or nanofillers such as nanoclay and nanocellulose. The combination of biopolymers along with surface modification of nanofillers can be used to create hierarchical structures that enhance hydrophobicity, complete barrier protection and functionalities of coated papers.

  1. Aerosol simulation including chemical and nuclear reactions

    International Nuclear Information System (INIS)

    Marwil, E.S.; Lemmon, E.C.

    1985-01-01

    The numerical simulation of aerosol transport, including the effects of chemical and nuclear reactions presents a challenging dynamic accounting problem. Particles of different sizes agglomerate and settle out due to various mechanisms, such as diffusion, diffusiophoresis, thermophoresis, gravitational settling, turbulent acceleration, and centrifugal acceleration. Particles also change size, due to the condensation and evaporation of materials on the particle. Heterogeneous chemical reactions occur at the interface between a particle and the suspending medium, or a surface and the gas in the aerosol. Homogeneous chemical reactions occur within the aersol suspending medium, within a particle, and on a surface. These reactions may include a phase change. Nuclear reactions occur in all locations. These spontaneous transmutations from one element form to another occur at greatly varying rates and may result in phase or chemical changes which complicate the accounting process. This paper presents an approach for inclusion of these effects on the transport of aerosols. The accounting system is very complex and results in a large set of stiff ordinary differential equations (ODEs). The techniques for numerical solution of these ODEs require special attention to achieve their solution in an efficient and affordable manner. 4 refs

  2. Key papers in prostate cancer.

    Science.gov (United States)

    Rodney, Simon; Shah, Taimur Tariq; Patel, Hitendra R H; Arya, Manit

    2014-11-01

    Prostate cancer is the most common cancer and second leading cause of death in men. The evidence base for the diagnosis and treatment of prostate cancer is continually changing. We aim to review and discuss past and contemporary papers on these topics to provoke debate and highlight key dilemmas faced by the urological community. We review key papers on prostate-specific antigen screening, radical prostatectomy versus surveillance strategies, targeted therapies, timing of radiotherapy and alternative anti-androgen therapeutics. Previously, the majority of patients, irrespective of risk, underwent radical open surgical procedures associated with considerable morbidity and mortality. Evidence is emerging that not all prostate cancers are alike and that low-grade disease can be safely managed by surveillance strategies and localized treatment to the prostate. The question remains as to how to accurately stage the disease and ultimately choose which treatment pathway to follow.

  3. Conservation of resources. [16 papers

    Energy Technology Data Exchange (ETDEWEB)

    1976-01-01

    The book is a collection of 16 papers presented at the Annual Chemical Congress which give a very broad picture of the problems of conservation both in the United Kingdom and in the world as a whole. The papers consider energy requirements of different communities and the wide disparity between the demands of the industrialized and Third World countries; the need for economy and the importance in due course of finding renewable forms of energy; very substantial losses of energy that take place when oil and coal are converted into electricity or when sources of energy have to be transported. The problems of nuclear energy are discussed and, in a consideration of the involvement of the chemical industry in energy, proposals are made for reducing the input of energy in the manufacture of chemicals. (MCW)

  4. Discussion on Papers 14 - 16

    International Nuclear Information System (INIS)

    Charles-Jones, S.; Muirhead, S.; Wilson, E.A.; Jefferson, M.; Binnie, C.J.A.; O'Connor, B.A.; Rothwell, P.; Cowie, D.

    1992-01-01

    Further observations were made on the great potential for tidal power developments in NW Australia. Discussion on the Severn Barrage paper and environmental effects of tidal power plants centred mainly around the impact on bird populations. The topics covered were: the adaptability of birds to changes in their environment with particular reference to the importance of inter-tidal areas for wildfowl and wading birds in the United Kingdom; the creation of mudflats as replacement feeding areas for wading birds; whether there is a danger that pressure from the construction industry might result in a barrage being built before the uncertainties in the environmental impact assessment are removed. Separate abstracts have been prepared for the three papers under discussion. (UK)

  5. Scientific papers for health informatics.

    Science.gov (United States)

    Pereira, Samáris Ramiro; Duarte, Jacy Marcondes; Bandiera-Paiva, Paulo

    2013-01-01

    From the hypothesis that the development of scientific papers, mainly in interdisciplinary areas such as Health Informatics, may bring difficulties to the author, as had its communicative efficacy decreased or compromising their approval for publication; we aim to make considerations on the main items to good players making this kind of text. The scientific writing has peculiarities that must be taken into consideration when it writes: general characteristics, such as simplicity and objectivity, and characteristics of each area of knowledge, such as terminology, formatting and standardization. The research methodology adopted is bibliographical. The information was based on literature review and the authors' experience, teachers and assessors of scientific methodology in peer review publications in the area. As a result, we designed a checklist of items to be checked before submission of a paper to a scientific publication vehicle in order to contribute to the promotion of research, facilitating the publication and increase its capacity in this important area of knowledge.

  6. Line Creep in Paper Peeling

    Directory of Open Access Journals (Sweden)

    Rosti J.

    2010-06-01

    Full Text Available We have studied experimentally the dynamics of the separation of a sheet of paper into two halves in a peeling configuration. The experimental setup consists of a peeling device, where a fracture front is driven along the plane of the paper, with a constant force. The theoretical picture is how an elastic line interacts with a random landscape of fracture toughness. We compare the results with theoretical simulations in several aspects. One recent finding concerns the autocorrelation function of the average front position. The data from the experiments produces so-called cusps or singularities in the correlation function, as predicted by the functional renormalization group theory for elastic lines. Comparisons with simulations with either a short range or a long range elastic kernel demonstrate that the latter agrees with the experimental observations, as expected.

  7. Construction-Paper Puzzle Masterpieces

    Science.gov (United States)

    Vance, Shelly

    2010-01-01

    Creating an appreciation of art history in her junior-high students has always been one of the author's greatest challenges as an art teacher. In this article, the author describes how her eighth-grade students re-created a famous work of art--piece by piece, like a puzzle or a stained-glass window--out of construction paper. (Contains 1 resource.)

  8. White paper on future technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This book describes the role of technology and challenge of future like why we focus on future technologies and future, human being and technology, methodology on development for future technologies such as global monitoring system for investigation on environmental change, investigation of research front for paper and patent and COMPAS, and domestic and foreign organization for discover on future technologies. It also introduces KISTI selection future technologies 500 : healthy society, smart society, safety society, and future technologies 500.

  9. Position paper: Seismic design criteria

    International Nuclear Information System (INIS)

    Farnworth, S.K.

    1995-01-01

    The purpose of this paper is to document the seismic design criteria to be used on the Title 11 design of the underground double-shell waste storage tanks and appurtenant facilities of the Multi-Function Waste Tank Facility (MWTF) project, and to provide the history and methodologies for determining the recommended Design Basis Earthquake (DBE) Peak Ground Acceleration (PGA) anchors for site-specific seismic response spectra curves. Response spectra curves for use in design are provided in Appendix A

  10. Selected Papers from NAFEW 2009

    International Nuclear Information System (INIS)

    Sharik, T.L.; Kimmins, J.P.H.

    2010-01-01

    Our understanding of the ecology and management of North American forests is rapidly evolving as a result of novel approaches to their study, many of which are the results of emerging technologies. The biennial North American Forest Ecology Workshop series attempts to capture these approaches and highlight the ways in which they expand our understanding of forest systems. The ten papers appearing in this issue were drawn from the 7th and most recent workshop, held in June 2009, in which there were over 150 presentations. The first paper in this special issue attempts to provide an overview of emerging themes in the ecology and management of North American Forests based on all presentations and follow-up discussions at the workshop and concludes with future research needs. The second paper describes the carbon flux of down woody materials in forests of the North central U.S. using recent data from the USDA Forest Services Forest Inventory and Analysis (FIA) Program and exemplifies the utility of a network of permanent plots for monitoring change over large spatial scales and long time periods. The study described in the third paper is a nice sequel to the second in that it uses FIA data to demonstrate changes in the population levels of an understory tree in eastern North America threatened by an introduced pathogen, among other causes. The authors point out that such data can be used to validate the findings of multiple small-scale studies and to generate hypotheses for testing at smaller scales, thereby reinforcing a workshop-wide call for the study of forest ecosystems at multiple scales.

  11. PC-assisted translation of photogrammetric papers

    Science.gov (United States)

    Güthner, Karlheinz; Peipe, Jürgen

    A PC-based system for machine translation of photogrammetric papers from the English into the German language and vice versa is described. The computer-assisted translating process is not intended to create a perfect interpretation of a text but to produce a rough rendering of the content of a paper. Starting with the original text, a continuous data flow is effected into the translated version by means of hardware (scanner, personal computer, printer) and software (OCR, translation, word processing, DTP). An essential component of the system is a photogrammetric microdictionary which is being established at present. It is based on several sources, including e.g. the ISPRS Multilingual Dictionary.

  12. All-printed paper-based memory

    KAUST Repository

    He, Jr-Hau

    2016-06-16

    All-printed paper-based substrate memory devices are described which can be prepared by a process that includes coating, using a screen printer, one or more areas of a paper substrate (102) with a conductor material (104), such as a carbon paste, to form a first electrode, depositing, with an ink jet printer, a layer of resistance switching insulator material (106), such as titanium dioxide, over one or more areas of the conductor material, and depositing, with an ink jet printer, a layer of metal (108), such as silver, over one or more areas of the titanium dioxide to form a second electrode.

  13. Selected papers on harmonic analysis, groups, and invariants

    CERN Document Server

    Nomizu, Katsumi

    1997-01-01

    This volume contains papers that originally appeared in Japanese in the journal Sūgaku. Ordinarily the papers would appear in the AMS translation of that journal, but to expedite publication the Society has chosen to publish them as a volume of selected papers. The papers range over a variety of topics, including representation theory, differential geometry, invariant theory, and complex analysis.

  14. 7 CFR 97.402 - Service of papers.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Service of papers. 97.402 Section 97.402 Agriculture... Service of papers. (a) Every paper required to be served on opposing parties and filed in the Office in... § 97.403. (b) The requirement in certain sections that a specified paper shall be served includes a...

  15. Stochastic singular optics (Conference paper)

    CSIR Research Space (South Africa)

    Roux, FS

    2014-09-01

    Full Text Available The study of optical vortices in stochastic optical fields involves various quantities, including the vortex density and topological charge density, that are defined in terms of local expectation values of distributions of optical vortices...

  16. SUBMISSION OF PAPERS/POSTERS

    African Journals Online (AJOL)

    Serge Guiot

    2012-09-27

    Sep 27, 2012 ... organic loading rate; TCD, thermal conductivity detector; HRT, hydraulic retention ... external analysis to determine solids, proteins, poly- saccharides ... the other with Extendosphere™ (Figure 6A) (glass granules including an ...

  17. Background paper on aquaculture research

    OpenAIRE

    Wenblad, Axel; Jokumsen, Alfred; Eskelinen, Unto; Torrissen, Ole

    2013-01-01

    The Board of MISTRA established in 2012 a Working Group (WG) on Aquaculture to provide the Board with background information for its upcoming decision on whether the foundation should invest in aquaculture research. The WG included Senior Advisor Axel Wenblad, Sweden (Chairman), Professor Ole Torrissen, Norway, Senior Advisory Scientist Unto Eskelinen, Finland and Senior Advisory Scientist Alfred Jokumsen, Denmark. The WG performed an investigation of the Swedish aquaculture sector including ...

  18. 47th ANZAAS Congress (abstracts). Vol. II, Sections 21-33

    Energy Technology Data Exchange (ETDEWEB)

    1976-01-01

    Abstracts are included for approximately 200 papers in the following areas of research: (1) geographical sciences, (2) education, (3) psychology, (4) economics, (5) anthropology, archaeology, and linguistics, (6) history, (7) sociology, (8) criminology and forensic science, (9) student Anzaas, and (10) communication in science. An author index is included. (MOW)

  19. Discussion on Papers 8 - 10

    International Nuclear Information System (INIS)

    Walker, R.; Wilson, E.A.; Gibson, P.

    1992-01-01

    Questions raised in the discussion are reported. These concerned: the Treasury discount rate for the construction of such a project; the CO 2 benefits of tidal schemes in developing countries; the criteria for deciding the total installed capacity of the scheme; the Government review of the cost-benefit analysis; the benefit arising from the elimination of nitrogen and sulphur oxides; security of supply; carbon tax projections. The only response reported is on the question of criteria for deciding the total installed capacity. Separate abstracts have been prepared on the three papers under discussion. (UK)

  20. Waste characterization practices: summary paper

    International Nuclear Information System (INIS)

    Logan, J.A.

    1987-01-01

    Recent reviews of the records on disposal waste at several DOE sites have indicated that records still contain little information practical to waste management. Much of the disposed waste is identified by vague terms, i.e., general plant waste. Attached to this paper is a new waste characterization code devised by the Idaho National Engineering Laboratory to aid in waste volume reduction and stabilization. It is recommended that every facility involved in waste generation and disposal needs to be detailing its wastes to support upgrading of waste management practices. 1 table

  1. White Paper on Nuclear Astrophysics

    OpenAIRE

    Arcones, Almudena; Bardayan, Dan W.; Beers, Timothy C.; Berstein, Lee A.; Blackmon, Jeffrey C.; Messer, Bronson; Brown, B. Alex; Brown, Edward F.; Brune, Carl R.; Champagne, Art E.; Chieffi, Alessandro; Couture, Aaron J.; Danielewicz, Pawel; Diehl, Roland; El-Eid, Mounib

    2016-01-01

    This white paper informs the nuclear astrophysics community and funding agencies about the scientific directions and priorities of the field and provides input from this community for the 2015 Nuclear Science Long Range Plan. It summarizes the outcome of the nuclear astrophysics town meeting that was held on August 21-23, 2014 in College Station at the campus of Texas A&M University in preparation of the NSAC Nuclear Science Long Range Plan. It also reflects the outcome of an earlier town mee...

  2. FY 1986 scientific and technical reports, articles, papers and presentations

    Science.gov (United States)

    Turner, Joyce E. (Compiler)

    1986-01-01

    Formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel in FY-86 are presented. Also included are papers of MSFC contractors.

  3. Papers by the Decentralized Wastewater Management MOU Partnership

    Science.gov (United States)

    Four position papers for state, local, and tribal government officials and interested stakeholders. These papers include information on the uses and benefits of decentralized wastewater treatment and examples of its effective use.

  4. Collected software engineering papers, volume 9

    Science.gov (United States)

    1991-01-01

    This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from November 1990 through October 1991. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. This is the ninth such volume of technical papers produced by the SEL. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. For the convenience of this presentation, the eight papers contained here are grouped into three major categories: (1) software models studies; (2) software measurement studies; and (3) Ada technology studies. The first category presents studies on reuse models, including a software reuse model applied to maintenance and a model for an organization to support software reuse. The second category includes experimental research methods and software measurement techniques. The third category presents object-oriented approaches using Ada and object-oriented features proposed for Ada. The SEL is actively working to understand and improve the software development process at GSFC.

  5. Silica Coated Paper Substrate for Paper-Spray Analysis of Therapeutic Drugs in Dried Blood Spots

    Science.gov (United States)

    Zhang, Zhiping; Xu, Wei; Manicke, Nicholas E.; Cooks, R. Graham; Ouyang, Zheng

    2011-01-01

    Paper spray is a newly developed ambient ionization method that has been applied for direct qualitative and quantitative analysis of biological samples. The properties of the paper substrate and spray solution have a significant impact on the release of chemical compounds from complex sample matrices, the diffusion of the analytes through the substrate, and the formation of ions for mass spectrometry analysis. In this study, a commercially available silica-coated paper was explored in an attempt to improve the analysis of therapeutic drugs in dried blood spots (DBS). The dichloromethane/isopropanol solvent has been identified as an optimal spray solvent for the analysis. The comparison was made with paper spray using chromatography paper as substrate with methanol/water as solvent for the analysis of verapamil, citalopram, amitriptyline, lidocaine and sunitinib in dried blood spots. It has been demonstrated the efficiency of recovery of the analytes was notably improved with the silica coated paper and the limit of quantitation (LOQ) for the drug analysis was 0.1 ng mL−1 using a commercial triple quadrupole mass spectrometer. The use of silica paper substrate also resulted in a sensitivity improvement of 5-50 fold in comparison with chromatography papers, including the Whatmann ET31 paper used for blood card. Analysis using a handheld miniature mass spectrometer Mini 11 gave LOQs of 10~20 ng mL−1 for the tested drugs, which is sufficient to cover the therapeutic ranges of these drugs. PMID:22145627

  6. Zγ production at NNLO including anomalous couplings

    Science.gov (United States)

    Campbell, John M.; Neumann, Tobias; Williams, Ciaran

    2017-11-01

    In this paper we present a next-to-next-to-leading order (NNLO) QCD calculation of the processes pp → l + l -γ and pp\\to ν \\overline{ν}γ that we have implemented in MCFM. Our calculation includes QCD corrections at NNLO both for the Standard Model (SM) and additionally in the presence of Zγγ and ZZγ anomalous couplings. We compare our implementation, obtained using the jettiness slicing approach, with a previous SM calculation and find broad agreement. Focusing on the sensitivity of our results to the slicing parameter, we show that using our setup we are able to compute NNLO cross sections with numerical uncertainties of about 0.1%, which is small compared to residual scale uncertainties of a few percent. We study potential improvements using two different jettiness definitions and the inclusion of power corrections. At √{s}=13 TeV we present phenomenological results and consider Zγ as a background to H → Zγ production. We find that, with typical cuts, the inclusion of NNLO corrections represents a small effect and loosens the extraction of limits on anomalous couplings by about 10%.

  7. Alternating phase focussing including space charge

    International Nuclear Information System (INIS)

    Cheng, W.H.; Gluckstern, R.L.

    1992-01-01

    Longitudinal stability can be obtained in a non-relativistic drift tube accelerator by traversing each gap as the rf accelerating field rises. However, the rising accelerating field leads to a transverse defocusing force which is usually overcome by magnetic focussing inside the drift tubes. The radio frequency quadrupole is one way of providing simultaneous longitudinal and transverse focusing without the use of magnets. One can also avoid the use of magnets by traversing alternate gaps between drift tubes as the field is rising and falling, thus providing an alternation of focussing and defocusing forces in both the longitudinal and transverse directions. The stable longitudinal phase space area is quite small, but recent efforts suggest that alternating phase focussing (APF) may permit low velocity acceleration of currents in the 100-300 ma range. This paper presents a study of the parameter space and a test of crude analytic predictions by adapting the code PARMILA, which includes space charge, to APF. 6 refs., 3 figs

  8. Object technology: A white paper

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, S.R.; Arrowood, L.F.; Cain, W.D.; Stephens, W.M.; Vickers, B.D.

    1992-05-11

    Object-Oriented Technology (OOT), although not a new paradigm, has recently been prominently featured in the trade press and even general business publications. Indeed, the promises of object technology are alluring: the ability to handle complex design and engineering information through the full manufacturing production life cycle or to manipulate multimedia information, and the ability to improve programmer productivity in creating and maintaining high quality software. Groups at a number of the DOE facilities have been exploring the use of object technology for engineering, business, and other applications. In this white paper, the technology is explored thoroughly and compared with previous means of developing software and storing databases of information. Several specific projects within the DOE Complex are described, and the state of the commercial marketplace is indicated.

  9. COINCO Strategy 2025 - Discussion Paper

    DEFF Research Database (Denmark)

    Jespersen, Per Homann; Jensen, Anne; Stroschein, Christoph

     The regions and cities in the COINCO-corridor Oslo-Göteborg-Malmö-Copenhagen-Berlin have worked out a strategy proposal which is presented in this discussion paper. Behind the strategy is a political will to utilize mutual strengths and together become a leading player in a globalized world, based...... on matters essential to development - ‘hard' issues such as transport infrastructure and ‘soft' issues on improving cooperation within business, administration and knowledge production. The synergy of COINCO will have to come from collaboration among businesses. Supporting cooperation between existing...... to be institutionally supported. Therefore a number of knowledge institutions have to be formed organized around the ‘triple helix'-principle - a tight collaboration between business, administration and knowledge producers, especially universities. Also new ways of collaboration have to be explored - ‘network...

  10. Eurosafe-2011 - Papers and slides

    International Nuclear Information System (INIS)

    2012-01-01

    This document gathers some slides, papers and posters that were presented at the 2011 annual EUROSAFE forum. This forum focuses in its plenary part on 'Nuclear safety: new challenges, gained experience and public expectations' in the light of the Fukushima nuclear power station (NPS) accident. The topic will be considered from the point of view of Japanese safety authorities, of a regulator, of an international organisation, of a utility and of a Technical Safety Organisation (TSO). The first part of the second day will be devoted to presentations of the Fukushima NPS accident. The second part of this day will present the latest work carried out by ETSON (European Technical Safety Organizations Network) and EUROSAFE members and their partners worldwide through three seminars (nuclear safety research and safety assessment, radiation protection and environment, nuclear material and nuclear facilities security) and a workshop on operating experience feedback on nuclear fuel cycle facilities

  11. The NBER-Rensselaer Scientific Papers Database: Form, Nature, and Function. NBER Working Paper No. 14575

    Science.gov (United States)

    Adams, James D.; Clemmons, J. Roger

    2008-01-01

    This article is a guide to the NBER-Rensselaer Scientific Papers Database, which includes more than 2.5 million scientific publications and over 21 million citations to those papers. The data cover an important sample of 110 top U.S. universities and 200 top U.S.-based R&D-performing firms during the period 1981-1999. This article describes the…

  12. Laboratory plutonium: a paper tiger

    International Nuclear Information System (INIS)

    Wallis, L.R.

    1975-01-01

    To meet projected electrical energy consumption in 2070, the world will need nuclear power. Production of Pu and its use are discussed. Scare statements by nuclear energy critics are condemned. Experience in the safe handling of Pu at the GE Vallecitos Nuclear Center (VNC) is pointed out as showing that the Pu economy of the future can be approached with confidence. The health physics and safeguards program of VNC is included as an appendix. (U.S.)

  13. Hip implants - Paper VI - Ion concentrations

    Energy Technology Data Exchange (ETDEWEB)

    Sargeant, A. [Department of Biological Sciences, Ohio Northern University, Ada, OH 45810 (United States); Goswami, T. [Department of Mechanical Engineering, Ohio Northern University, Ada, OH 45810 (United States)]. E-mail: t-goswami@onu.edu

    2007-07-01

    Total hip-joint arthroplasty is performed in increasing numbers where it translates to about 0.16-0.2% of population per year in industrial countries. In most cases, an implant is a metallic component articulating with a metal, ceramic or poly-ethylene liner as seen in the case of hip, knee and spine. The metal implants release ions in vivo. Therefore, there is a need to study metallic implants and ions released as a result. Toxic concentrations of ions can lead to many adverse physiological effects, including cytotoxicity, genotoxicity, carcinogenicity, and metal sensitivity. There is a need to map ion concentrations establishing boundaries between normal and toxic levels; which however, does not exist. Reference levels of ion concentrations in body fluids and tissues determined by many studies are compiled, reviewed, and presented in this paper. The concentrations of ions released from different alloys, including cobalt, chromium, nickel, molybdenum titanium, aluminum, and vanadium, are presented in this paper. This paper reviews the literature pertaining to clinical data on metal ion concentrations in patients with metal joint prostheses, and laboratory data on the physiological effects of the metals.

  14. Geothermal hydrogen - a vision? Paper

    Energy Technology Data Exchange (ETDEWEB)

    Zittel, W.; Weindorf, W.; Wurster, R.; Bussmann, W.

    2001-07-01

    With the progresses in geothermal electricity production by means of the hot-dry-rock (HDR) method electricity might be produced at cost of between 0.07 - 0.09 ECU/kWh, depending on systems sizes of between 5 - 20 MW{sub e}. The electricity can be used to produce hydrogen from electrolysis and water. This method of electricity production offers high availability with operating hour of between 7,600 - 8,000 hours per year. The 40 GWh electricity production per year from one 5 MW{sub e} geothermal plant are sufficient to produce enough hydrogen for the operation of an average fueling station with about 400 refuelings per day at cost of about 20 - 30 percent higher than today's gasoline (including taxes). In this contribution some details of the analysis are presented as well as a general discussion of geothermal hydrogen production as a future energy vector. (orig.)

  15. An Integrated Biochemistry Laboratory, Including Molecular Modeling

    Science.gov (United States)

    Hall, Adele J. Wolfson Mona L.; Branham, Thomas R.

    1996-11-01

    ) experience with methods of protein purification; (iii) incorporation of appropriate controls into experiments; (iv) use of basic statistics in data analysis; (v) writing papers and grant proposals in accepted scientific style; (vi) peer review; (vii) oral presentation of results and proposals; and (viii) introduction to molecular modeling. Figure 1 illustrates the modular nature of the lab curriculum. Elements from each of the exercises can be separated and treated as stand-alone exercises, or combined into short or long projects. We have been able to offer the opportunity to use sophisticated molecular modeling in the final module through funding from an NSF-ILI grant. However, many of the benefits of the research proposal can be achieved with other computer programs, or even by literature survey alone. Figure 1.Design of project-based biochemistry laboratory. Modules (projects, or portions of projects) are indicated as boxes. Each of these can be treated independently, or used as part of a larger project. Solid lines indicate some suggested paths from one module to the next. The skills and knowledge required for protein purification and design are developed in three units: (i) an introduction to critical assays needed to monitor degree of purification, including an evaluation of assay parameters; (ii) partial purification by ion-exchange techniques; and (iii) preparation of a grant proposal on protein design by mutagenesis. Brief descriptions of each of these units follow, with experimental details of each project at the end of this paper. Assays for Lysozyme Activity and Protein Concentration (4 weeks) The assays mastered during the first unit are a necessary tool for determining the purity of the enzyme during the second unit on purification by ion exchange. These assays allow an introduction to the concept of specific activity (units of enzyme activity per milligram of total protein) as a measure of purity. In this first sequence, students learn a turbidimetric assay

  16. Slides with no attached paper

    International Nuclear Information System (INIS)

    Warin, Dominique; Wallenius, Janne; Ouzounian, Gerald; Wikberg, Peter; Todd, Terry A.; Kormilitsyn, Mikhael V.; Osipenko, Alexander G.; Mayorshin, A.A.; McLachlan, Fiona; Nash, Ken L.; Nilsson, M.; Grimes, T.; Braley, J.C.; TAKESHITA, Kenji; Babain, Vasiliy A.; Spendlikova, I.; Distler, P.; John, J.; Sebesta, F.; VU, Trong-Hung; SIMONIN, Jean-Pierre; PAULENOVA, Alena; PRECEK, Martin; HARTIG, Kyle; KNAPP, Nathan; Vidick, Geoffrey; Bouslimani, Nouri; Desreux, Jean F.; Lewis, F.W.; Hudson, M.J.; Harwood, L.M.; Nunez, Ana; Nagarajan, K.; Vasudeva Rao, P.R.; Raj, Baldev; Ignatiev, Victor; Surenkov, Alexander; Pouchon, Manuel A.; Skarnemark, Gunnar; Allard, Stefan; Ekberg, Christian; Retegan, Teodora; Nordlund, Anders; John, Jan; Maershin, Alexander; Zakirov, R.; Panov, A.; Toropov, Andrey

    2010-01-01

    This document brings together the different presentations (slides) given at the workshop but with no attached paper. These slides refer to the following presentations: - Presentation of ITN (Instituto Tecnologico e Nuclear); - Minor Actinide Partitioning (Dominique Warin); - Transmutation (Janne Wallenius); - Radioactive Waste Management, IGD-TP (Gerald Ouzounian); - Present status of the Swedish nuclear waste management programme (Peter Wikberg); - The U.S. Fuel Cycle Research and Development Program - Separations Research and Development (Terry Todd); - Strategies and national programs of closed fuel cycles - Russian Expert Vision (Mikhael Kormilitsyn) - Extraction Studies Of Potential Solvent Formulations For The GANEX Process (Fiona MacLachlan); - Investigations of The Fundamental Chemistry of the TALSPEAK Process (Ken Nash); - Extraction Separation of Trivalent Minor Actinides and Lanthanides by Hexa-dentate Nitrogen-donor Extractant, TPEN, and its Analogs (Kenji Takeshita); - Fluorinated Diluents for HLW Processing - technological point of view (Vasiliy Babain); - Extraction properties of some new pyridine molecules and search for better diluents (Irena Spendlikova); - Kinetics of extraction of Eu 3+ ion by TODGA and CyMe 4 -BTBP studied using the RMC technique (Trong Hung Vu); - Redox Chemistry of Neptunium in Solutions of Nitric Acid (Alena Paulenova); - NMR applied to actinide ions and their complexes. In search of covalency effects (Geoffrey Vidick); - Towards 'Stability Rules' for Radiolysis of bis-DGA compounds (Ana Nunez); - Pyroprocess Research Activities at IGCAR, Kalpakkam, India (K. Nagarajan); - Critical issues of nuclear energy systems employing molten salt fluorides: from ISTC No. 1606 to No. 3749 (1. year of project activity) and MARS/EVOL cooperation (Victor Ignatiev); - Conversion processes: Internal Gelation and the Sphere-pac concept (Manuel Pouchon); - A Combined Nuclear Technology and Nuclear Chemistry Master. A Unique

  17. Collected software engineering papers, volume 7

    Science.gov (United States)

    1989-01-01

    A collection is presented of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) during the period Dec. 1988 to Oct. 1989. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. For the convenience of this presentation, the seven papers contained here are grouped into three major categories: (1) Software Measurement and Technology Studies; (2) Measurement Environment Studies; and (3) Ada Technology Studies. The first category presents experimental research and evaluation of software measurement and technology; the second presents studies on software environments pertaining to measurement. The last category represents Ada technology and includes research, development, and measurement studies.

  18. Collected software engineering papers, volume 6

    Science.gov (United States)

    1988-01-01

    A collection is presented of technical papers produced by participants in the Software Engineering Laboratory (SEL) during the period 1 Jun. 1987 to 1 Jan. 1989. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. For the convenience of this presentation, the twelve papers contained here are grouped into three major categories: (1) Software Measurement and Technology Studies; (2) Measurement Environment Studies; and (3) Ada Technology Studies. The first category presents experimental research and evaluation of software measurement and technology; the second presents studies on software environments pertaining to measurement. The last category represents Ada technology and includes research, development, and measurement studies.

  19. White paper on atomic energy in 2003

    International Nuclear Information System (INIS)

    2003-12-01

    This white paper explains the state of nuclear energy from June 19, 1998, to September, 2003. It consists of text and material. The text contains two chapters, of which the first chapter includes nuclear power plant, recovery of reliance, nuclear fuel cycle, development of research, international trend and evaluation of policy, and the second chapter nuclear energy administration of Japan, consensus of citizen and nuclear energy, nuclear power plant and nuclear fuel cycle, various kinds of development of nuclear energy technologies, radiation use for national life, consensus of international society and nuclear energy and propulsive basis of research, development and use of nuclear energy. Material collects determination of committee, budget on nuclear energy and chronological tables. This paper contains only the fundamental items related to the nuclear energy policy except nuclear energy safety. (S.Y.)

  20. A student's guide to Einstein's major papers

    CERN Document Server

    Kennedy, Robert E

    2012-01-01

    Our understanding of the physical universe underwent a revolution in the early twentieth century - evolving from the classical physics of Newton, Galileo, and Maxwell to the modern physics of relativity and quantum mechanics. The dominant figure in this revolutionary change was Albert Einstein. In a single year, 1905, Einstein produced breakthrough works in three areas of physics: on the size and the effects of atoms; on the quantization of the electromagnetic field; and on the special theory of relativity. In 1916 he produced a fourth breakthrough work, the general theory of relativity. A Student's Guide to Einstein's Major Papers focuses on Einstein's contributions, setting his major works into their historical context, and then takes the reader through the details of each paper, including the mathematics. This book helps the reader appreciate the simplicity and insightfulness of Einstein's ideas and how revolutionary his work was, and locate it in the evolution of scientific thought begun by the ancient...

  1. Transparent and conductive paper from nanocellulose fibers

    KAUST Repository

    Hu, Liangbing

    2013-01-01

    Here we report on a novel substrate, nanopaper, made of cellulose nanofibrils, an earth abundant material. Compared with regular paper substrates, nanopaper shows superior optical properties. We have carried out the first study on the optical properties of nanopaper substrates. Since the size of the nanofibrils is much less than the wavelength of visible light, nanopaper is highly transparent with large light scattering in the forward direction. Successful depositions of transparent and conductive materials including tin-doped indium oxide, carbon nanotubes and silver nanowires have been achieved on nanopaper substrates, opening up a wide range of applications in optoelectronics such as displays, touch screens and interactive paper. We have also successfully demonstrated an organic solar cell on the novel substrate. © The Royal Society of Chemistry 2013.

  2. The rock-paper-scissors game

    Science.gov (United States)

    Zhou, Hai-Jun

    2016-04-01

    Rock-Paper-Scissors (RPS), a game of cyclic dominance, is not merely a popular children's game but also a basic model system for studying decision-making in non-cooperative strategic interactions. Aimed at students of physics with no background in game theory, this paper introduces the concepts of Nash equilibrium and evolutionarily stable strategy, and reviews some recent theoretical and empirical efforts on the non-equilibrium properties of the iterated RPS, including collective cycling, conditional response patterns and microscopic mechanisms that facilitate cooperation. We also introduce several dynamical processes to illustrate the applications of RPS as a simplified model of species competition in ecological systems and price cycling in economic markets.

  3. 29 CFR 570.63 - Occupations involved in the operation of paper-products machines, scrap paper balers, and paper...

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Occupations involved in the operation of paper-products machines, scrap paper balers, and paper box compactors (Order 12). 570.63 Section 570.63 Labor Regulations... involved in the operation of paper-products machines, scrap paper balers, and paper box compactors (Order...

  4. Demand Response Valuation Frameworks Paper

    Energy Technology Data Exchange (ETDEWEB)

    Heffner, Grayson

    2009-02-01

    While there is general agreement that demand response (DR) is a valued component in a utility resource plan, there is a lack of consensus regarding how to value DR. Establishing the value of DR is a prerequisite to determining how much and what types of DR should be implemented, to which customers DR should be targeted, and a key determinant that drives the development of economically viable DR consumer technology. Most approaches for quantifying the value of DR focus on changes in utility system revenue requirements based on resource plans with and without DR. This ''utility centric'' approach does not assign any value to DR impacts that lower energy and capacity prices, improve reliability, lower system and network operating costs, produce better air quality, and provide improved customer choice and control. Proper valuation of these benefits requires a different basis for monetization. The review concludes that no single methodology today adequately captures the wide range of benefits and value potentially attributed to DR. To provide a more comprehensive valuation approach, current methods such as the Standard Practice Method (SPM) will most likely have to be supplemented with one or more alternative benefit-valuation approaches. This report provides an updated perspective on the DR valuation framework. It includes an introduction and four chapters that address the key elements of demand response valuation, a comprehensive literature review, and specific research recommendations.

  5. Estonian white paper on energy

    International Nuclear Information System (INIS)

    Hamburg, Arvi

    1997-01-01

    Energy policy, environmental protection and economy form a triangle of tightly linked sectors, and any solution of some energy problem can be solved only in the light of all the above mentioned factors. There are several energy master plans for Estonia, the first of them dating back to the years of the Soviet Union and ending the list with the plan to cover the years up to 2000. By now the basic principles of the Estonian energy policy have been prepared and Estonian Energy Concept is being worked out. The main goal of Estonian energy policy is ensure an effective and environmentally benign energy supply for the country. It means safety in energy supply, effective production and supply together with sufficient environmental protection. Energy Council in the role of an advisory voluntary organization for inspection of the energy system and finding measures to improve its efficiency is established with parliament members included. The Estonian Energy Research Institute and the Oil--Shale Research Institute serve as a scientific advisory board for the government in energy policy. It's important to emphasise that privatisation is no panacea, solving all the problems, and therefore we are facing hard to move in the right direction, satisfying all the consumers of energy

  6. Emission trading: A discussion paper

    International Nuclear Information System (INIS)

    1992-05-01

    Emission trading is a market-based incentive program designed to control air emissions in which a cap is placed on the total quantity of pollutants allowed to be emitted in an airshed. Appropriate shares of this amount are allocated among participating emission sources, and participants can buy or sell their shares. Advantages of emission trading include its potential to achieve air emission targets at a lower cost than the traditional command and control approach, and its ability to accommodate economic growth without compromising environmental quality. A study was conducted to evaluate the potential use of emission trading programs to achieve emission reduction goals set for nitrogen oxides, volatile organic compounds (VOC), and sulfur oxides. Emission trading programs in the USA are reviewed and a set of factors important for the success of emission trading are identified. Key policy and design issues related to an emission trading program are identified, explained, and discussed. Administrative issues are then analyzed, such as legislative authority, monitoring and enforcement requirements, and trading between jurisdictions. A preliminary assessment of emission trading for control of NOx and VOC in the Lower Fraser Valley indicates that emission trading would be feasible, but legislative authority to implement such a program would have to be introduced

  7. Papers on Morphology. The Ohio State University Working Papers in Linguistics #29.

    Science.gov (United States)

    Zwicky, Arnold M., Ed.; Wallace, Rex E., Ed.

    A collection of papers on morphology in relation to other grammar components and on the morphology-syntax interface includes: "Locative Plural Forms in Classical Sanskrit" (Belinda Brodie); "On Explaining Morpheme Structure" (Donald G. Churma); "Lexical Relatedness, Head of a Word and the Misanalysis of Latin" (Brian D. Joseph and Rex E. Wallace);…

  8. HALT Selected Papers, 1993 with Language Teaching Ideas from Paradise.

    Science.gov (United States)

    Chandler, Paul, Ed.; Hodnett, Edda, Ed.

    In section I, papers presented at the Hawaii Association of Language Teachers (HALT) in 1993 are presented. Section II includes a number of projects received from a call for papers simultaneous to the call for the HALT papers. Section 1 contains: "This is Like a Foreign Language to Me: Keynote Address" (Bill VanPatten); "From Discussion Questions…

  9. Superhydrophobic paper in the development of disposable labware and lab-on-paper devices.

    Science.gov (United States)

    Sousa, Maria Peixoto; Mano, João Filipe

    2013-05-01

    Traditionally in superhydrophobic surfaces history, the focus has frequently settled on the use of complex processing methodologies using nonbiodegradable and costly materials. In light of recent events on lab-on-paper emergence, there are now some efforts for the production of superhydrophobic paper but still with little development and confined to the fabrication of flat devices. This work gives a new look at the range of possible applications of bioinspired superhydrophobic paper-based substrates, obtained using a straightforward surface modification with poly(hydroxybutyrate). As an end-of-proof of the possibility to create lab-on-chip portable devices, the patterning of superhydrophobic paper with different wettable shapes is shown with low-cost approaches. Furthermore, we suggest the use of superhydrophobic paper as an extremely low-cost material to design essential nonplanar lab apparatus, including reservoirs for liquid storage and manipulation, funnels, tips for pipettes, or accordion-shaped substrates for liquid transport or mixing. Such devices take the advantage of the self-cleaning and extremely water resistance properties of the surfaces as well as the actions that may be done with paper such as cut, glue, write, fold, warp, or burn. The obtained substrates showed lower propensity to adsorb proteins than the original paper, kept superhydrophobic character upon ethylene oxide sterilization and are disposable, suggesting that the developing devices could be especially adequate for use in contact with biological and hazardous materials.

  10. Healthcare Engineering Defined: A White Paper.

    Science.gov (United States)

    Chyu, Ming-Chien; Austin, Tony; Calisir, Fethi; Chanjaplammootil, Samuel; Davis, Mark J; Favela, Jesus; Gan, Heng; Gefen, Amit; Haddas, Ram; Hahn-Goldberg, Shoshana; Hornero, Roberto; Huang, Yu-Li; Jensen, Øystein; Jiang, Zhongwei; Katsanis, J S; Lee, Jeong-A; Lewis, Gladius; Lovell, Nigel H; Luebbers, Heinz-Theo; Morales, George G; Matis, Timothy; Matthews, Judith T; Mazur, Lukasz; Ng, Eddie Yin-Kwee; Oommen, K J; Ormand, Kevin; Rohde, Tarald; Sánchez-Morillo, Daniel; Sanz-Calcedo, Justo García; Sawan, Mohamad; Shen, Chwan-Li; Shieh, Jiann-Shing; Su, Chao-Ton; Sun, Lilly; Sun, Mingui; Sun, Yi; Tewolde, Senay N; Williams, Eric A; Yan, Chongjun; Zhang, Jiajie; Zhang, Yuan-Ting

    2015-01-01

    Engineering has been playing an important role in serving and advancing healthcare. The term "Healthcare Engineering" has been used by professional societies, universities, scientific authors, and the healthcare industry for decades. However, the definition of "Healthcare Engineering" remains ambiguous. The purpose of this position paper is to present a definition of Healthcare Engineering as an academic discipline, an area of research, a field of specialty, and a profession. Healthcare Engineering is defined in terms of what it is, who performs it, where it is performed, and how it is performed, including its purpose, scope, topics, synergy, education/training, contributions, and prospects.

  11. Healthcare Engineering Defined: A White Paper

    Directory of Open Access Journals (Sweden)

    Ming-Chien Chyu

    2015-01-01

    Full Text Available Engineering has been playing an important role in serving and advancing healthcare. The term “Healthcare Engineering” has been used by professional societies, universities, scientific authors, and the healthcare industry for decades. However, the definition of “Healthcare Engineering” remains ambiguous. The purpose of this position paper is to present a definition of Healthcare Engineering as an academic discipline, an area of research, a field of specialty, and a profession. Healthcare Engineering is defined in terms of what it is, who performs it, where it is performed, and how it is performed, including its purpose, scope, topics, synergy, education/training, contributions, and prospects.

  12. Learning to Mow Grass: IDF Adaptations to Hybrid Threats

    Science.gov (United States)

    2017-05-25

    April 2006. The language of SOD, however, was a mixed bag from “post-modern French philosophy, literary theory, architecture and psychology.”44 It...ground forces OCL soon proved this assessment. Near the end of 2008, Hamas had broken the Egyptian -brokered truce between it and Israel. Having...turned to southern Gaza to destroy more of Hamas tunnel network near the Egyptian border.176

  13. Peripheral mowing blade. Final report ending 08/24/00

    Energy Technology Data Exchange (ETDEWEB)

    Darden, John A.

    2000-08-24

    The first prototype built for the peripheral mower blade was the nineteen foot batwing mower. It features twelve-inch blades, three-sixteenth thick. The configuration of the mower is three individual rotor gangs housed in separate housing all mounted to a centrally located housing. Each outer gang is driven by power being diverted through the center rotor. The power is supplied to each wing through means of a disconnect mechanism which allows the outer gangs to stop in the event that particular housing is raised by hydraulic power. This unit has given us unlimited information in the drive and power applications needed to drive the peripheral blade gangs. The nineteen foot unit has not changed much from the beginning, but information received from its performance has been applied to the building of a preproduction unit that is now in progress. Another prototype unit we have work with is the seven foot mounted mower. This unit consisted of a standard ASAE category I three-point hitch. The hitch was made by using an "A" frame which formed the attaching points for the mower and two back straps that gives support to the hitch assembly. The deck allowed for one-inch blade clearance at the top and featured a slanted deck extension at both the front and rear. The extension were formed by means of two breaks that run parallel to the blade gang and angled down at one hundred thirty degrees at the front and one hundred fifteen degrees at the rear. A roller is mounted across the back of the deck. This roller offers support to the deck while on the ground and is adjustable for height of cut control. This unit was made with a small roller, and too lighter hitch. After only a few hours of test proved that both items would have to be beefed up. The rear roller was increased to a four-inch diameter. The hitch was changed to a two-sided solid metal hitch three-eighths of an inch thick on the next machines.

  14. Annotated Bibliography; Freedom of Information Center Reports and Summary Papers.

    Science.gov (United States)

    Freedom of Information Center, Columbia, MO.

    This bibliography lists and annotates almost 400 information reports, opinion papers, and summary papers dealing with freedom of information. Topics covered include the nature of press freedom and increased press efforts toward more open access to information; the press situation in many foreign countries, including France, Sweden, Communist…

  15. Coyote Papers: The University of Arizona Working Papers in Linguistics, Volume 11. Special Volume on Native American Languages.

    Science.gov (United States)

    Weinberg, Jessica P., Ed.; O'Bryan, Erin L., Ed.; Moll, Laura A., Ed.; Haugan, Jason D., Ed.

    The five papers included in this volume approach the study of American Indian languages from a diverse array of methodological and theoretical approaches to linguistics. Two papers focus on approaches that come from the applied linguistics tradition, emphasizing ethnolinguistics and discourse analysis: Sonya Bird's paper "A Cross Cultural…

  16. 42 CFR 410.100 - Included services.

    Science.gov (United States)

    2010-10-01

    ... service; however, maintenance therapy itself is not covered as part of these services. (c) Occupational... increase respiratory function, such as graded activity services; these services include physiologic... rehabilitation plan of treatment, including physical therapy services, occupational therapy services, speech...

  17. Preparing Scientific Papers, Posters, and Slides.

    Science.gov (United States)

    Lefor, Alan Kawarai; Maeno, Misato

    2016-01-01

    Publications and presentations are important in academic medicine. The ability to present information in a standard fashion is critically important. Papers, posters, and slides must be prepared appropriately to maximize their chance of being accepted. The first step is to use word processing software correctly. English language usage must conform to standard scientific English usage. Abbreviations should be avoided as much as possible. Numerical data must be presented with the appropriate number of significant figures. The first step in preparing a paper is to decide the target journal. Papers should always be written in 12 point Times New Roman font, while slides and posters should be in Arial or Helvetica. The Results section must contain actual data with appropriate statistical analysis. Take great care to prepare figures and tables according to the journal's instructions. Posters must be prepared to allow easy reading at a distance of 2m. Use a white background and dark letters. The majority of the area of your poster should be Results, and there is no need to include the abstract or references on a poster. Slide presentations should be limited to about one slide for each minute of the talk. Avoid the use of animations and excessive use of color. Do not use abbreviations on slides. Following these simple guidelines will meet the requirements of most journals and allow your audience to appreciate the data on your posters and slides. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  18. Guatemalan women's paper making co-op.

    Science.gov (United States)

    Stewart, B M

    1999-01-01

    Founded in 1992, is an independent grassroots organization whose goal is to assist community development, health, education, clean water and income generation. The Q'eqchi' Maya Indians constitute the fourth largest indigenous group located on the banks of Rio Dulce, in the eastern rainforest of Guatemala. Project Ak'Tenamit helped the Q'eqchi' people revive their ancient art of paper making as a viable and self-sustainable source of income. As the material used by the ancient Maya--cork husk and banana stalks--are still abundant, it was decided that this art could be successfully re-introduced. With papermaking, the Q'eqchi women were able to earn money from their own production without even compromising their respective households. Ak'Tenamit was responsible for the distribution of paper making products in stores throughout Guatemala. Although there are still many obstacles confronting these women, the paper making cooperative provides employment opportunities and is indeed a great help to them. They produce a total of 15 different products including bowls, cards, and bookmarks.

  19. Article Including Environmental Barrier Coating System

    Science.gov (United States)

    Lee, Kang N. (Inventor)

    2015-01-01

    An enhanced environmental barrier coating for a silicon containing substrate. The enhanced barrier coating may include a bond coat doped with at least one of an alkali metal oxide and an alkali earth metal oxide. The enhanced barrier coating may include a composite mullite bond coat including BSAS and another distinct second phase oxide applied over said surface.

  20. Rare thoracic cancers, including peritoneum mesothelioma

    NARCIS (Netherlands)

    Siesling, Sabine; van der Zwan, Jan Maarten; Izarzugaza, Isabel; Jaal, Jana; Treasure, Tom; Foschi, Roberto; Ricardi, Umberto; Groen, Harry; Tavilla, Andrea; Ardanaz, Eva

    Rare thoracic cancers include those of the trachea, thymus and mesothelioma (including peritoneum mesothelioma). The aim of this study was to describe the incidence, prevalence and survival of rare thoracic tumours using a large database, which includes cancer patients diagnosed from 1978 to 2002,

  1. Rare thoracic cancers, including peritoneum mesothelioma

    NARCIS (Netherlands)

    Siesling, Sabine; Zwan, J.M.V.D.; Izarzugaza, I.; Jaal, J.; Treasure, T.; Foschi, R.; Ricardi, U.; Groen, H.; Tavilla, A.; Ardanaz, E.

    2012-01-01

    Rare thoracic cancers include those of the trachea, thymus and mesothelioma (including peritoneum mesothelioma). The aim of this study was to describe the incidence, prevalence and survival of rare thoracic tumours using a large database, which includes cancer patients diagnosed from 1978 to 2002,

  2. Thin-layer and paper chromatography

    International Nuclear Information System (INIS)

    Sherma, J.

    1986-01-01

    This selective review covers the literature of thin-layer chromatography (TLC) and paper chromatography (PC) cited in Chemical Abstracts from December 5, 1983, through November 25, 1985, and Analytical Abstracts from November 1983 to November 1985. Also researched directly were the following important journals publishing papers on TLC and PC: the Journal of Chromatography (including its bibliography issues), Journal of High Resolution Chromatography and Chromatography Communications, Journal of Chromatographic Science, Chromatographia, Analytical Chemistry, JAOAC, and the special TLC issues of the Journal of Liquid Chromatography. Many of the inherent advantages of TLC that are obvious to workers familiar with high performance, quantitative theory and practice still are not appreciated adequately by the majority of people using chromatography. These include unrestricted access to the separation process; introducing magnetic, thermal, electrical, and other physical forces to improve resolution; high sample throughput; truly multidimensional separations; and the use of controlled multiple gradients. Many advantages of TLC relative to column chromatography were discussed in the Introductions to our 1982 and 1984 reviews of TLC in this Journal. No complete commercial robotics system specifically for TLC has been developed, but all necessary modules are available for such a system. The combination of robotics, with the continued development of theory, practice, and instrumentation will lead eventually to TLC systems that are unrivaled for speed, versatility, accuracy, precision, and sensitivity. 573 references

  3. Paper-based biodetection using luminescent nanoparticles.

    Science.gov (United States)

    Ju, Qiang; Noor, M Omair; Krull, Ulrich J

    2016-05-10

    Point-of-care and in-field technologies for rapid, sensitive and selective detection of molecular biomarkers have attracted much interest. Rugged bioassay technology capable of fast detection of markers for pathogens and genetic diseases would in particular impact the quality of health care in the developing world, but would also make possible more extensive screening in developed countries to tackle problems such as those associated with water and food quality, and tracking of infectious organisms in hospitals and clinics. Literature trends indicate an increasing interest in the use of nanomaterials, and in particular luminescent nanoparticles, for assay development. These materials may offer attributes for development of assays and sensors that could achieve improvements in analytical figures of merit, and provide practical advantages in sensitivity and stability. There is opportunity for cost-efficiency and technical simplicity by implementation of luminescent nanomaterials as the basis for transduction technology, when combined with the use of paper substrates, and the ubiquitous availability of cell phone cameras and associated infrastructure for optical detection and transmission of results. Luminescent nanoparticles have been described for a broad range of bioanalytical targets including small molecules, oligonucleotides, peptides, proteins, saccharides and whole cells (e.g., cancer diagnostics). The luminescent nanomaterials that are described herein for paper-based bioassays include metal nanoparticles, quantum dots and lanthanide-doped nanocrystals. These nanomaterials often have broad and strong absorption and narrow emission bands that improve opportunity for multiplexed analysis, and can be designed to provide emission at wavelengths that are efficiently processed by conventional digital cameras. Luminescent nanoparticles can be embedded in paper substrates that are designed to direct fluid flow, and the resulting combination of technologies can offer

  4. How to write English scientific paper easily

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeong Sun

    2010-07-15

    This book covers definition of paper, how to write paper, as well as proofreading of paper and process of publication. It explains necessity and kinds of paper, organizations and form of paper, evaluation of paper, titles, abstracts, introductions, method of study, results, considerations, conclusions, acknowledgement and epilogue, reference, writers, pictures and tables, tense and analysis of sentences, submission of paper and ethics of publication, plagiarism, confirmation of items before writing paper, matters to be attended to drafting, and criteria and assessment of the examination of paper.

  5. How to write English scientific paper easily

    International Nuclear Information System (INIS)

    Kim, Hyeong Sun

    2010-07-01

    This book covers definition of paper, how to write paper, as well as proofreading of paper and process of publication. It explains necessity and kinds of paper, organizations and form of paper, evaluation of paper, titles, abstracts, introductions, method of study, results, considerations, conclusions, acknowledgement and epilogue, reference, writers, pictures and tables, tense and analysis of sentences, submission of paper and ethics of publication, plagiarism, confirmation of items before writing paper, matters to be attended to drafting, and criteria and assessment of the examination of paper.

  6. Enhanced battery model including temperature effects

    NARCIS (Netherlands)

    Rosca, B.; Wilkins, S.

    2013-01-01

    Within electric and hybrid vehicles, batteries are used to provide/buffer the energy required for driving. However, battery performance varies throughout the temperature range specific to automotive applications, and as such, models that describe this behaviour are required. This paper presents a

  7. Topology Optimization including Inequality Buoyancy Constraints

    NARCIS (Netherlands)

    Picelli, R.; Van Dijk, R.; Vicente, W.M.; Pavanello, R.; Langelaar, M.; Van Keuen, A.

    2014-01-01

    This paper presents an evolutionary topology optimization method for applications in design of completely submerged buoyant devices with design-dependent fluid pressure loading. This type of structures aid rig installations and pipeline transportation in all water depths in offshore structural

  8. Including estimates of the future in today's financial statements

    OpenAIRE

    Mary Barth

    2006-01-01

    This paper explains why the question is how, not if, today's financial statements should include estimates of the future. Including such estimates is not new, but their use is increasing. This increase results primarily because standard setters believe asset and liability measures that reflect current economic conditions and up-to-date expectations of the future will result in more useful information for making economic decisions, which is the objective of financial reporting. This is why sta...

  9. Water Integration Project Science Strategies White Paper

    International Nuclear Information System (INIS)

    Alan K. Yonk

    2003-01-01

    This white paper has been prepared to document the approach to develop strategies to address Idaho National Engineering and Environmental Laboratory (INEEL) science and technology needs/uncertainties to support completion of INEEL Idaho Completion Project (Environmental Management [EM]) projects against the 2012 plan. Important Idaho Completion Project remediation and clean-up projects include the 2008 OU 10-08 Record of Decision, completion of EM by 2012, Idaho Nuclear Technology and Engineering Center Tanks, INEEL CERCLA Disposal Facility, and the Radioactive Waste Management Complex. The objective of this effort was to develop prioritized operational needs and uncertainties that would assist Operations in remediation and clean-up efforts at the INEEL and develop a proposed path forward for the development of science strategies to address these prioritized needs. Fifteen needs/uncertainties were selected to develop an initial approach to science strategies. For each of the 15 needs/uncertainties, a detailed definition was developed. This included extracting information from the past interviews with Operations personnel to provide a detailed description of the need/uncertainty. For each of the 15 prioritized research and development needs, a search was performed to identify the state of the associated knowledge. The knowledge search was performed primarily evaluating ongoing research. The ongoing research reviewed included Environmental Systems Research Analysis, Environmental Management Science Program, Laboratory Directed Research and Development, Inland Northwest Research Alliance, United States Geological Survey, and ongoing Operations supported projects. Results of the knowledge search are documented as part of this document

  10. Policy paper no. 1 : Pedestrians and cycling

    Energy Technology Data Exchange (ETDEWEB)

    Zbogar, H. [City of Brampton, ON (Canada)

    2004-06-01

    The City of Brampton's Transportation and Transit Master Plan includes a workable plan to promote walking and cycling facilities in the area. This paper reviewed existing policies, programs and practices in the City of Brampton that pertain to cycling and walking. Walking and cycling issues and trends were also reviewed with reference to the principles that improve the pedestrian and cycling environment, such as safety, security, convenience, continuity, comfort, coherence and attractiveness. The recreation, health and fitness benefits of walking and cycling were also outlined along with transportation, environmental, and economic benefits. The official plan for the city was included with reference to walking and cycling sections in the city. It was noted that effective pathways should be customer driven and respond to the needs of residents. They should also accommodate all uses, including walking, jogging, cycling and in-line skating. Experience of other jurisdictions in Ontario in providing walking and cycling facilities were also reviewed. It was noted that walking and cycling are significant elements of an intermodal transportation system and have a strong bearing on a city's vision for urban street design. 11 refs., 2 tabs., 3 figs.

  11. Water Integration Project Science Strategies White Paper

    Energy Technology Data Exchange (ETDEWEB)

    Alan K. Yonk

    2003-09-01

    This white paper has been prepared to document the approach to develop strategies to address Idaho National Engineering and Environmental Laboratory (INEEL) science and technology needs/uncertainties to support completion of INEEL Idaho Completion Project (Environmental Management [EM]) projects against the 2012 plan. Important Idaho Completion Project remediation and clean-up projects include the 2008 OU 10-08 Record of Decision, completion of EM by 2012, Idaho Nuclear Technology and Engineering Center Tanks, INEEL CERCLA Disposal Facility, and the Radioactive Waste Management Complex. The objective of this effort was to develop prioritized operational needs and uncertainties that would assist Operations in remediation and clean-up efforts at the INEEL and develop a proposed path forward for the development of science strategies to address these prioritized needs. Fifteen needs/uncertainties were selected to develop an initial approach to science strategies. For each of the 15 needs/uncertainties, a detailed definition was developed. This included extracting information from the past interviews with Operations personnel to provide a detailed description of the need/uncertainty. For each of the 15 prioritized research and development needs, a search was performed to identify the state of the associated knowledge. The knowledge search was performed primarily evaluating ongoing research. The ongoing research reviewed included Environmental Systems Research Analysis, Environmental Management Science Program, Laboratory Directed Research and Development, Inland Northwest Research Alliance, United States Geological Survey, and ongoing Operations supported projects. Results of the knowledge search are documented as part of this document.

  12. Modelling a linear PM motor including magnetic saturation

    NARCIS (Netherlands)

    Polinder, H.; Slootweg, J.G.; Compter, J.C.; Hoeijmakers, M.J.

    2002-01-01

    The use of linear permanent-magnet (PM) actuators increases in a wide variety of applications because of the high force density, robustness and accuracy. The paper describes the modelling of a linear PM motor applied in, for example, wafer steppers, including magnetic saturation. This is important

  13. LTRACK: Beam-transport calculation including wakefield effects

    International Nuclear Information System (INIS)

    Chan, K.C.D.; Cooper, R.K.

    1988-01-01

    LTRACK is a first-order beam-transport code that includes wakefield effects up to quadrupole modes. This paper will introduce the readers to this computer code by describing the history, the method of calculations, and a brief summary of the input/output information. Future plans for the code will also be described

  14. Including patients’ perspectives in patient information leaflets: A polyocular approach

    DEFF Research Database (Denmark)

    Fage-Butler, Antoinette Mary

    2013-01-01

    Existing research reveals that patients’ perspectives are missing from mandatory patient information leaflets (PILs). At the same time, there is overwhelming consensus that they should be included in this genre, and a corresponding need for potential approaches to tackle this problem. This paper ...

  15. Unsteady panel method for complex configurations including wake modeling

    CSIR Research Space (South Africa)

    Van Zyl, Lourens H

    2008-01-01

    Full Text Available implementations of the DLM are however not very versatile in terms of geometries that can be modeled. The ZONA6 code offers a versatile surface panel body model including a separated wake model, but uses a pressure panel method for lifting surfaces. This paper...

  16. Including Students with Severe Disabilities in General Education Settings.

    Science.gov (United States)

    Wisniewski, Lech; Alper, Sandra

    1994-01-01

    This paper presents five systematic phases for bringing about successful regular education inclusion of students with severe disabilities. Phases include develop networks within the community, assess school and community resources, review strategies for integration, install strategies that lead to integration, and develop a system of feedback and…

  17. Using renewable sources in the pulp and paper mills

    International Nuclear Information System (INIS)

    Hazi, Aneta; Hazi, Gheorghe

    2007-01-01

    The pulp and paper industry is a major consumer of natural sources (wood) and energy (fossil fuels, electricity) and a significant contributor of pollutant discharges to the environment. In this paper there are presented pulp and paper making process and steam and power generation using renewable sources. This paper includes also an exergy analysis of the steam and power generation process for a pulp and paper mill. Based on the analysis, two sustainability indicators were calculated: the exergetic efficiency and the exergy renewability. (authors)

  18. Nonlinear Progressive Collapse Analysis Including Distributed Plasticity

    Directory of Open Access Journals (Sweden)

    Mohamed Osama Ahmed

    2016-01-01

    Full Text Available This paper demonstrates the effect of incorporating distributed plasticity in nonlinear analytical models used to assess the potential for progressive collapse of steel framed regular building structures. Emphasis on this paper is on the deformation response under the notionally removed column, in a typical Alternate Path (AP method. The AP method employed in this paper is based on the provisions of the Unified Facilities Criteria – Design of Buildings to Resist Progressive Collapse, developed and updated by the U.S. Department of Defense [1]. The AP method is often used for to assess the potential for progressive collapse of building structures that fall under Occupancy Category III or IV. A case study steel building is used to examine the effect of incorporating distributed plasticity, where moment frames were used on perimeter as well as the interior of the three dimensional structural system. It is concluded that the use of moment resisting frames within the structural system will enhance resistance to progressive collapse through ductile deformation response and that it is conserative to ignore the effects of distributed plasticity in determining peak displacement response under the notionally removed column.

  19. Briefing paper -- Remedial Action Assessment System

    International Nuclear Information System (INIS)

    Buelt, J.L.

    1990-04-01

    Congress has mandated a more comprehensive management of hazardous wastes with the Resource Conservation and Recovery Act (RCRA), the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA or ''Superfund'') and the Superfund Amendment and Reauthorization Act (SARA). This mandate includes restoration of disposal sites contaminated through past disposal practices. This mandate applies to facilities operated for and by the Department of Energy (DOE), just as it does to industrial and other institutions. To help implement the CERCLA/SARA remedial investigation and feasibility study (RI/FS) process in a consistent, timely, and cost-effective manner, a methodology needs to be developed that will allow definition, sorting, and screening of remediation technologies for each operable unit (waste site). This need is stated specifically in Section 2.2.2.1 of the October 1989 Applied Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) Plan of the DOE. This Briefing Paper is prepared to respond to this need. 1 fig

  20. Cap and trade offsets regulation - consultation paper

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Due to increasing concerns about the environment, British Columbia has committed to reducing its 2007 greenhouse gas emissions levels by 33% in 2020 and 80% in 2050. To reach those objectives, emissions trading and offset regulations are being developed by the Climate Action Secretariat. The aim of this document is to present a first draft of the regulations to the various stakeholders, including First Nations and the general public, together with the proposed offset eligibility criteria and related process, and to get their feedback. This document is itself part of the 5-phase process of developing the regulations. Following the 45 days during which comments on the proposed regulation were sought, the climate action secretariat will complete legal drafting of the regulations, drawing on help from this stakeholder input, and the regulation will subsequently be implemented. An accompanying response form was attached to this consultation paper.

  1. White paper on atomic energy in 2004

    International Nuclear Information System (INIS)

    2005-03-01

    Since the publication of its last White Paper on Nuclear Energy in 2003, the Atomic Energy Commission of Japan (AEC) summarized trends covering all aspects of nuclear energy over the period up to December 2004. This paper is comprised of a main document and supplementary materials. The first chapter of the main document summarizes the current activities toward national and international understanding and trust promotion of nuclear energy divided along the topics of 'Restoring trust', 'Structuring trust toward new enterprise implementation', 'Establishment of understanding and trust of international society', 'AEC's activities toward creation of new Long-Term Program', and 'Establishment of future understanding and trust. 'The second chapter summarized recent trends of national and private activities based on the Long-Term Program created in November 2000, covering the topics 'Nuclear Energy Policy in Japan', 'Harmony between People, Society and Nuclear Energy', 'Nuclear Power Generation and the Nuclear Fuel Cycle', 'Diversified Development of Nuclear Science and Technology', 'Utilization of Radiation Contributing to People's Lives', 'Harmony between International Society and Nuclear Energy', and 'Foundation to Promote Research, Development and Utilization of Nuclear Energy'. The supplementary materials include lists of AEC decisions, nuclear energy budgets, year-by-year data tables, and other such similar materials. (T. Tanaka)

  2. White paper on atomic energy in 2005

    International Nuclear Information System (INIS)

    2006-03-01

    Since the publication of its last White Paper on Atomic Energy in 2004, the Atomic Energy Commission of Japan (AEC) summarized trends covering all aspects of nuclear energy over the period up to December 2005. This paper is comprised of a main document and supplementary materials. In the first chapter of the main document, the first section summarized the changes on research, development and utilization of nuclear energy in 50 years from establishment of the Atomic Energy Basic Law. The second section summarized that nuclear energy utilization (energy utilization and radiation utilization) for contributing to the welfare of humanity and the improvement of the standard of living of the people, and the appropriate direction in the future and the recognitions to become its background of nuclear policies that indicated in 'Framework for Nuclear Energy Policy' (AEC decided at October 2005), concerning fundamental activities, R and D activities and international activities that essential for the realization of nuclear energy utilization. The second chapter summarized recent trends of national and private activities on research, development and utilization of nuclear energy, covering the topics 'Nuclear Energy Policy in Japan', 'Strengthening Fundamental Activities on Research, Development and Utilization of Nuclear Energy', 'Steady Promotion of Nuclear Energy Utilization', Promotion of Nuclear Energy Research and Development', Promotion of International Activity', 'Various Evaluation on Research, Development and Utilization of Nuclear Energy'. The supplementary materials include lists of AEC decisions, nuclear energy budgets, year-by-year data tables, and other such similar materials. (J.P.N.)

  3. Paper-based synthetic gene networks.

    Science.gov (United States)

    Pardee, Keith; Green, Alexander A; Ferrante, Tom; Cameron, D Ewen; DaleyKeyser, Ajay; Yin, Peng; Collins, James J

    2014-11-06

    Synthetic gene networks have wide-ranging uses in reprogramming and rewiring organisms. To date, there has not been a way to harness the vast potential of these networks beyond the constraints of a laboratory or in vivo environment. Here, we present an in vitro paper-based platform that provides an alternate, versatile venue for synthetic biologists to operate and a much-needed medium for the safe deployment of engineered gene circuits beyond the lab. Commercially available cell-free systems are freeze dried onto paper, enabling the inexpensive, sterile, and abiotic distribution of synthetic-biology-based technologies for the clinic, global health, industry, research, and education. For field use, we create circuits with colorimetric outputs for detection by eye and fabricate a low-cost, electronic optical interface. We demonstrate this technology with small-molecule and RNA actuation of genetic switches, rapid prototyping of complex gene circuits, and programmable in vitro diagnostics, including glucose sensors and strain-specific Ebola virus sensors.

  4. Paper-based Synthetic Gene Networks

    Science.gov (United States)

    Pardee, Keith; Green, Alexander A.; Ferrante, Tom; Cameron, D. Ewen; DaleyKeyser, Ajay; Yin, Peng; Collins, James J.

    2014-01-01

    Synthetic gene networks have wide-ranging uses in reprogramming and rewiring organisms. To date, there has not been a way to harness the vast potential of these networks beyond the constraints of a laboratory or in vivo environment. Here, we present an in vitro paper-based platform that provides a new venue for synthetic biologists to operate, and a much-needed medium for the safe deployment of engineered gene circuits beyond the lab. Commercially available cell-free systems are freeze-dried onto paper, enabling the inexpensive, sterile and abiotic distribution of synthetic biology-based technologies for the clinic, global health, industry, research and education. For field use, we create circuits with colorimetric outputs for detection by eye, and fabricate a low-cost, electronic optical interface. We demonstrate this technology with small molecule and RNA actuation of genetic switches, rapid prototyping of complex gene circuits, and programmable in vitro diagnostics, including glucose sensors and strain-specific Ebola virus sensors. PMID:25417167

  5. Births and deaths including fetal deaths

    Data.gov (United States)

    U.S. Department of Health & Human Services — Access to a variety of United States birth and death files including fetal deaths: Birth Files, 1968-2009; 1995-2005; Fetal death file, 1982-2005; Mortality files,...

  6. Including Indigenous Minorities in Decision-Making

    DEFF Research Database (Denmark)

    Pristed Nielsen, Helene

    Based on theories of public sphere participation and deliberative democracy, this book presents empirical results from a study of experiences with including Aboriginal and Maori groups in political decision-making in respectively Western Australia and New Zealand......Based on theories of public sphere participation and deliberative democracy, this book presents empirical results from a study of experiences with including Aboriginal and Maori groups in political decision-making in respectively Western Australia and New Zealand...

  7. Gas storage materials, including hydrogen storage materials

    Science.gov (United States)

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  8. Academic Primer Series: Eight Key Papers about Education Theory.

    Science.gov (United States)

    Gottlieb, Michael; Boysen-Osborn, Megan; Chan, Teresa M; Krzyzaniak, Sara M; Pineda, Nicolas; Spector, Jordan; Sherbino, Jonathan

    2017-02-01

    Many teachers adopt instructional methods based on assumptions of best practices without attention to or knowledge of supporting education theory. Familiarity with a variety of theories informs education that is efficient, strategic, and evidence-based. As part of the Academic Life in Emergency Medicine Faculty Incubator Program, a list of key education theories for junior faculty was developed. A list of key papers on theories relevant to medical education was generated using an expert panel, a virtual community of practice synthetic discussion, and a social media call for resources. A three-round, Delphi-informed voting methodology including novice and expert educators produced a rank order of the top papers. These educators identified 34 unique papers. Eleven papers described the general use of education theory, while 23 papers focused on a specific theory. The top three papers on general education theories and top five papers on specific education theory were selected and summarized. The relevance of each paper for junior faculty and faculty developers is also presented. This paper presents a reading list of key papers for junior faculty in medical education roles. Three papers about general education theories and five papers about specific educational theories are identified and annotated. These papers may help provide foundational knowledge in education theory to inform junior faculty teaching practice.

  9. 27 CFR 40.351 - Cigarette papers.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Cigarette papers. 40.351... OF THE TREASURY (CONTINUED) TOBACCO MANUFACTURE OF TOBACCO PRODUCTS, CIGARETTE PAPERS AND TUBES, AND PROCESSED TOBACCO Manufacture of Cigarette Papers and Tubes Taxes § 40.351 Cigarette papers. Cigarette...

  10. 27 CFR 41.34 - Cigarette papers.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Cigarette papers. 41.34... OF THE TREASURY (CONTINUED) TOBACCO IMPORTATION OF TOBACCO PRODUCTS, CIGARETTE PAPERS AND TUBES, AND PROCESSED TOBACCO Taxes Tax Rates § 41.34 Cigarette papers. Cigarette papers are taxed at the following...

  11. Fabrication of paper based microfluidic devices

    CSIR Research Space (South Africa)

    Govindasamy, K

    2012-07-01

    Full Text Available of the paper which is then melted to allow the wax to penetrate the depth of the paper. This results in hydrophobic barriers capable of guiding fluid movement through the paper. The paper provides a detailed study of process parameters critical...

  12. Continuous jute fibre reinforced laminated paper composite

    Indian Academy of Sciences (India)

    Jute fibre; laminated paper composite; plastic bag pollution. Abstract. Plastic bags create a serious environmental problem. The proposed jute fibre reinforced laminated paper composite and reinforcement-fibre free paper laminate may help to combat the war against this pollutant to certain extent. The paper laminate ...

  13. Wind Speed Measurement by Paper Anemometer

    Science.gov (United States)

    Zhong, Juhua; Cheng, Zhongqi; Guan, Wenchuan

    2011-01-01

    A simple wind speed measurement device, a paper anemometer, is fabricated based on the theory of standing waves. In providing the working profile of the paper anemometer, an experimental device is established, which consists of an anemometer sensor, a sound sensor, a microphone, paper strips, a paper cup, and sonic acquisition software. It shows…

  14. 21 CFR 872.6140 - Articulation paper.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Articulation paper. 872.6140 Section 872.6140 Food... DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6140 Articulation paper. (a) Identification. Articulation paper is a device composed of paper coated with an ink dye intended to be placed between the...

  15. Magnet options for sensors for the pulp and paper industry

    International Nuclear Information System (INIS)

    Green, M.A.; Barale, P.J.; Fong, C.G.; Luft, P.A.; Reimer, J.A.; Yahnke, M.S.

    2001-01-01

    The Lawrence Berkeley National Laboratory (LBNL) has been developing sensors for the pulp and paper industry that uses a magnetic field. The applications for magnetic sensors that have studied include (1) sensors for the measurement of the water and ice content of wood chips entering the pulping mill, (2) sensors for measuring the water content and other constituents of the black liquor leaving the paper digester, and (3) sensors for measuring paper thickness and water content as the paper is being processed. These tasks can be done using nuclear magnetic resonance (NMR). The magnetic field used for doing the NMR can come from either permanent magnets or superconducting magnets. The choice of the magnet is dependent on a number of factors, which include the size of the sample and field strength needed to do the sensing task at hand. This paper describes some superconducting magnet options that can be used in the pulp and paper industry.

  16. Inline CBET Model Including SRS Backscatter

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, David S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-06-26

    Cross-beam energy transfer (CBET) has been used as a tool on the National Ignition Facility (NIF) since the first energetics experiments in 2009 to control the energy deposition in ignition hohlraums and tune the implosion symmetry. As large amounts of power are transferred between laser beams at the entrance holes of NIF hohlraums, the presence of many overlapping beat waves can lead to stochastic ion heating in the regions where laser beams overlap [P. Michel et al., Phys. Rev. Lett. 109, 195004 (2012)]. Using the CBET gains derived in this paper, we show how to implement these equations in a ray-based laser source for a rad-hydro code.

  17. Selected papers for global `95 concerning plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Sutcliffe, W.G. [ed.

    1996-06-14

    This report contains selected papers from the Global `95 Conference ``Evaluation of Emerging Nuclear Fuel Cycle Systems,`` held in Versailles, Sept. 11-14, 1995. The 11 papers in Part I are from ``Benefits and Risks of Reprocessing`` sessions. The 7 papers in Part II are some of the more interesting poster papers that relate to the use of Pu for power generation. Finally, the 3 papers are on the topic of management and disposition of Pu from retired nuclear weapons.

  18. Selected papers for global '95 concerning plutonium

    International Nuclear Information System (INIS)

    Sutcliffe, W.G.

    1996-01-01

    This report contains selected papers from the Global '95 Conference ''Evaluation of Emerging Nuclear Fuel Cycle Systems,'' held in Versailles, Sept. 11-14, 1995. The 11 papers in Part I are from ''Benefits and Risks of Reprocessing'' sessions. The 7 papers in Part II are some of the more interesting poster papers that relate to the use of Pu for power generation. Finally, the 3 papers are on the topic of management and disposition of Pu from retired nuclear weapons

  19. Other relevant papers in physical oceanography

    International Nuclear Information System (INIS)

    Nyffeler, F.

    1989-01-01

    During the past few years, significant progress has occurred in the field of physical oceanography partly as a consequence of developing cooperation and international participation in well-coordinated ocean research programmes. Although these programs were not designed specifically to address CRESP problems, many have proved to be directly relevant to CRESP objectives. For example, MODE, POLYMODE, and Tourbillon were intensive site-specific experiments that included studies of dispersion processes throughout the water column. NOAMP and GME were also site specific, involved the entire water column, and even stressed near-bottom and suspended-sediment processes. Others, (e.g., WOCE) are larger in scope and include extensive observations of the general circulation of entire ocean basins. As a whole, they contribute immensely to improving the data base for exchange and transport processes and thereby for the verification and validation of both regional-scale and general-circulation ocean models. That, in turn, is directly relevant to radiological assessments. Selected papers deriving from experiments such as these are discussed and referenced below

  20. Electric Power Monthly, August 1990. [Glossary included

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-29

    The Electric Power Monthly (EPM) presents monthly summaries of electric utility statistics at the national, Census division, and State level. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. Data includes generation by energy source (coal, oil, gas, hydroelectric, and nuclear); generation by region; consumption of fossil fuels for power generation; sales of electric power, cost data; and unusual occurrences. A glossary is included.

  1. Electrochemical cell structure including an ionomeric barrier

    Science.gov (United States)

    Lambert, Timothy N.; Hibbs, Michael

    2017-06-20

    An apparatus includes an electrochemical half-cell comprising: an electrolyte, an anode; and an ionomeric barrier positioned between the electrolyte and the anode. The anode may comprise a multi-electron vanadium phosphorous alloy, such as VP.sub.x, wherein x is 1-5. The electrochemical half-cell is configured to oxidize the vanadium and phosphorous alloy to release electrons. A method of mitigating corrosion in an electrochemical cell includes disposing an ionomeric barrier in a path of electrolyte or ion flow to an anode and mitigating anion accumulation on the surface of the anode.

  2. Isolators Including Main Spring Linear Guide Systems

    Science.gov (United States)

    Goold, Ryan (Inventor); Buchele, Paul (Inventor); Hindle, Timothy (Inventor); Ruebsamen, Dale Thomas (Inventor)

    2017-01-01

    Embodiments of isolators, such as three parameter isolators, including a main spring linear guide system are provided. In one embodiment, the isolator includes first and second opposing end portions, a main spring mechanically coupled between the first and second end portions, and a linear guide system extending from the first end portion, across the main spring, and toward the second end portion. The linear guide system expands and contracts in conjunction with deflection of the main spring along the working axis, while restricting displacement and rotation of the main spring along first and second axes orthogonal to the working axis.

  3. Translation of selected papers published in Nuclear Constants 4, 1986

    International Nuclear Information System (INIS)

    1989-08-01

    The document includes the English translation of 7 papers published in the Russian journal Nuclear Constants 4, 1986 and dealing with neutron data evaluations for actinide nuclei and iron. Refs, figs and tab

  4. Pulp and paper production from Spruce wood with kraft and ...

    African Journals Online (AJOL)

    STORAGESEVER

    2010-03-15

    Mar 15, 2010 ... optical properties of resultant paper were included to determine the properties of these pulp samples. ... pulping compounds in the kraft method are Na2S and .... Scanning electron microscope (SEM) measurement of pulp.

  5. Energy and environmental nanotechnology in conductive paper and textiles

    KAUST Repository

    Hu, Liangbing; Cui, Yi

    2012-01-01

    for emerging energy and environmental applications. The motivations and challenges of using paper and textiles for device applications will be discussed. Various types of energy and environmental devices have been demonstrated including supercapacitors, Li

  6. Title of the paper goes here second line

    Indian Academy of Sciences (India)

    %%Please download if these packages are not included %%in your local TeX distribution %%txfonts,balance,textcase,float %% \\begin{document} %%paper title %%For line breaks, \\\\ can be used within title \\title{Title of the paper goes here\\\\ second line} %%author names are separated by comma (,) %%use \\and before ...

  7. College Government. Coombe Lodge Report, Collection of Papers.

    Science.gov (United States)

    Further Education Staff Coll., Blagdon (England).

    Five papers examine various facets of the new administrative structures of continuing education in England since 1970. Papers include: the chief administrative officer as college secretary (R.J. Stephens); the chief administrative officer and the academic board (A.M. Davis); the department head and the academic board (H.D. Law); decisionmaking and…

  8. FY 2005 Scientific and Technical Reports, Articles, Papers, and Presentations

    Science.gov (United States)

    Narmore, K. A. (Compiler)

    2007-01-01

    This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel in FY 2005. It also includes papers of MSFC contractors. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

  9. FY 1994 scientific and technical reports, articles, papers, and presentations

    Science.gov (United States)

    Turner, Joyce E. (Compiler)

    1994-01-01

    This document presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center personnel in FY94. It also includes papers of MSFC contractors and author indexes. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

  10. FY 1985 scientific and technical reports, articles, papers and presentations

    Science.gov (United States)

    Turner, Joyce E. (Compiler)

    1985-01-01

    This document presents formal NASA technical reports, papers published in technical journals, and presentations by Marshal Space Flight Center (MSFC) personnel in FY 85. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Va. 22161.

  11. FY 1991 scientific and technical reports, articles, papers, and presentations

    Science.gov (United States)

    Turner, Joyce E. (Compiler)

    1991-01-01

    Formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 1991 are presented. Papers of MSFC contractors are also included. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

  12. FY 2002 Scientific and Technical Reports, Articles, Papers, and Presentations

    Science.gov (United States)

    Fowler, B. A. (Compiler)

    2003-01-01

    This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 2002. It also includes papers of MSFC contractors. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

  13. The Conditions for Educational Equality. CED Supplementary Paper, Number 34.

    Science.gov (United States)

    McMurrin, Sterling M., Ed.

    The contents of this Supplementary Paper are an attempt to refine the meaning of the common concept of equality of opportunity. The following papers are included: "The Meanings of Equality," James L. Jarrett; "Poverty and Childhood," Jerome S. Bruner; "The Crucible of the Urban Classroom," Staten W. Webster; "Increasing Educational Opportunity:…

  14. Rheology and extrusion of low-grade paper and sludge

    Science.gov (United States)

    C. Tim Scott; Stefan Zauscher; Daniel J. Klingenberg

    1999-01-01

    This paper discusses efforts to characterize the rheological properties of pulps that include low-grade wastepapers and papermill sludges to determine their potential for extrusion and conversion into useful products. We investigated apparent changes in viscosity associated with the addition of typical inorganic paper fillers (calcium carbonate, kaolin clay, and...

  15. 28 CFR 20.32 - Includable offenses.

    Science.gov (United States)

    2010-07-01

    ... Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record... vehicular manslaughter, driving under the influence of drugs or liquor, and hit and run), when unaccompanied by a § 20.32(a) offense. These exclusions may not be applicable to criminal history records...

  16. Including Students with Visual Impairments: Softball

    Science.gov (United States)

    Brian, Ali; Haegele, Justin A.

    2014-01-01

    Research has shown that while students with visual impairments are likely to be included in general physical education programs, they may not be as active as their typically developing peers. This article provides ideas for equipment modifications and game-like progressions for one popular physical education unit, softball. The purpose of these…

  17. Extending flood damage assessment methodology to include ...

    African Journals Online (AJOL)

    Optimal and sustainable flood plain management, including flood control, can only be achieved when the impacts of flood control measures are considered for both the man-made and natural environments, and the sociological aspects are fully considered. Until now, methods/models developed to determine the influences ...

  18. BIOLOGIC AND ECONOMIC EFFECTS OF INCLUDING DIFFERENT ...

    African Journals Online (AJOL)

    The biologic and economic effects of including three agro-industrial by-products as ingredients in turkey poult diets were investigated using 48 turkey poults in a completely randomised design experiment. Diets were formulated to contain the three by-products – wheat offal, rice husk and palm kernel meal, each at 20% level ...

  19. Including Children Dependent on Ventilators in School.

    Science.gov (United States)

    Levine, Jack M.

    1996-01-01

    Guidelines for including ventilator-dependent children in school are offered, based on experience with six such students at a New York State school. Guidelines stress adherence to the medical management plan, the school-family partnership, roles of the social worker and psychologist, orientation, transportation, classroom issues, and steps toward…

  20. Vibration of Piezoelectric Nanowires Including Surface Effects

    Directory of Open Access Journals (Sweden)

    R. Ansari

    2014-04-01

    Full Text Available In this paper, surface and piezoelectric effects on the vibration behavior of nanowires (NWs are investigated by using a Timoshenko beam model. The electric field equations and the governing equations of motion for the piezoelectric NWs are derived with the consideration of surface effects. By the exact solution of the governing equations, an expression for the natural frequencies of NWs with simply-supported boundary conditions is obtained. The effects of piezoelectricity and surface effects on the vibrational behavior of Timoshenko NWs are graphically illustrated. A comparison is also made between the predictions of Timoshenko beam model and those of its Euler-Bernoulli counterpart. Additionally, the present results are validated through comparison with the available data in the literature.

  1. Photoactive devices including porphyrinoids with coordinating additives

    Science.gov (United States)

    Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

    2015-05-12

    Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

  2. Electric power monthly, September 1990. [Glossary included

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-17

    The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

  3. Nuclear reactor shield including magnesium oxide

    International Nuclear Information System (INIS)

    Rouse, C.A.; Simnad, M.T.

    1981-01-01

    An improvement is described for nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux. The reactor shielding includes means providing structural support, neutron moderator material, neutron absorber material and other components, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron

  4. Model for safety reports including descriptive examples

    International Nuclear Information System (INIS)

    1995-12-01

    Several safety reports will be produced in the process of planning and constructing the system for disposal of high-level radioactive waste in Sweden. The present report gives a model, with detailed examples, of how these reports should be organized and what steps they should include. In the near future safety reports will deal with the encapsulation plant and the repository. Later reports will treat operation of the handling systems and the repository

  5. Jet-calculus approach including coherence effects

    International Nuclear Information System (INIS)

    Jones, L.M.; Migneron, R.; Narayanan, K.S.S.

    1987-01-01

    We show how integrodifferential equations typical of jet calculus can be combined with an averaging procedure to obtain jet-calculus-based results including the Mueller interference graphs. Results in longitudinal-momentum fraction x for physical quantities are higher at intermediate x and lower at large x than with the conventional ''incoherent'' jet calculus. These results resemble those of Marchesini and Webber, who used a Monte Carlo approach based on the same dynamics

  6. Call for Papers: Photonics in Switching

    Science.gov (United States)

    Wosinska, Lena; Glick, Madeleine

    2006-04-01

    Call for Papers: Photonics in Switching Guest Editors: Lena Wosinska, Royal Institute of Technology (KTH) / ICT Sweden Madeleine Glick, Intel Research, Cambridge, UK Technologies based on DWDM systems allow data transmission with bit rates of Tbit/s on a single fiber. To facilitate this enormous transmission volume, high-capacity and high-speed network nodes become inevitable in the optical network. Wideband switching, WDM switching, optical burst switching (OBS), and optical packet switching (OPS) are promising technologies for harnessing the bandwidth of WDM optical fiber networks in a highly flexible and efficient manner. As a number of key optical component technologies approach maturity, photonics in switching is becoming an increasingly attractive and practical solution for the next-generation of optical networks. The scope of this special issue is focused on the technology and architecture of optical switching nodes, including the architectural and algorithmic aspects of high-speed optical networks. Scope of Submission The scope of the papers includes, but is not limited to, the following topics: WDM node architectures Novel device technologies enabling photonics in switching, such as optical switch fabrics, optical memory, and wavelength conversion Routing protocols WDM switching and routing Quality of service Performance measurement and evaluation Next-generation optical networks: architecture, signaling, and control Traffic measurement and field trials Optical burst and packet switching OBS/OPS node architectures Burst/Packet scheduling and routing algorithms Contention resolution/avoidance strategies Services and applications for OBS/OPS (e.g., grid networks, storage-area networks, etc.) Burst assembly and ingress traffic shaping Hybrid OBS/TDM or OBS/wavelength routing Manuscript Submission To submit to this special issue, follow the normal procedure for submission to JON and select ``Photonics in Switching' in the features indicator of the online

  7. Remote Sensing Best Paper Award 2013

    OpenAIRE

    Prasad Thenkabail

    2013-01-01

    Remote Sensing has started to institute a “Best Paper” award to recognize the most outstanding papers in the area of remote sensing techniques, design and applications published in Remote Sensing. We are pleased to announce the first “Remote Sensing Best Paper Award” for 2013. Nominations were selected by the Editor-in-Chief and selected editorial board members from among all the papers published in 2009. Reviews and research papers were evaluated separately.

  8. Righting writing: strategies for improving nursing student papers.

    Science.gov (United States)

    Bickes, Joan T; Schim, Stephanie M

    2010-01-01

    The ability to clearly express complex ideas in writing is necessary for nurses in professional practice at all levels from novice to expert. The community health nursing course is specially designated as writing intensive to provide students with the experience of preparing a major scholarly paper. To address issues of poor paper quality and grade inflation we implemented a program including a writing workshop for faculty, a revision of the grading rubric, and a system of blind review for grading student papers. Changes resulted in a major shift in paper grades which more closely reflects the actual quality of the work.

  9. Computers & Chemical Engineering: Best paper of 2009

    DEFF Research Database (Denmark)

    Venkatasubramanian, Venkat; Gani, Rafiqul

    2011-01-01

    The Editorial Advisory Board of the Journal has assessed the papers published in Volume 33 by means of a three stage process of nomination and balloting. We are pleased to announce that the 2009 Best Paper of the Year Award goes to J.M. Harrold and R.S. Parker for their paper entitled “Clinically...

  10. Selected papers on analysis and differential equations

    CERN Document Server

    Society, American Mathematical

    2010-01-01

    This volume contains translations of papers that originally appeared in the Japanese journal Sūgaku. These papers range over a variety of topics in ordinary and partial differential equations, and in analysis. Many of them are survey papers presenting new results obtained in the last few years. This volume is suitable for graduate students and research mathematicians interested in analysis and differential equations.

  11. 49 CFR 176.24 - Shipping papers.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 176.24 Section 176.24... Requirements § 176.24 Shipping papers. (a) A person may not accept a hazardous material for transportation or transport a hazardous material by vessel unless that person has received a shipping paper prepared in...

  12. 49 CFR 177.817 - Shipping papers.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 177.817 Section 177.817... Information and Regulations § 177.817 Shipping papers. (a) General requirements. A person may not accept a... received a shipping paper prepared in accordance with part 172 of this subchapter or the material is...

  13. CCAA Working papers | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Working papers are published by CCAA staff, consultants, advisers, or interns, and are not part of partner-funded research activities. Each paper is peer reviewed by CCAA staff. They are published and distributed primarily in electronic format via the CCAA site, though hardcopies are available upon request. Working papers ...

  14. 49 CFR 174.24 - Shipping papers.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 174.24 Section 174.24... Requirements § 174.24 Shipping papers. (a) A person may not accept a hazardous material for transportation or transport a hazardous material by rail unless that person receives a shipping paper prepared in accordance...

  15. Demonstrating Fluorescence with Neon Paper and Plastic

    Science.gov (United States)

    Birriel, Jennifer J.; Roe, Clarissa

    2015-01-01

    Several papers in this journal have dealt with the fluorescence in orange neon plastic, olive oil, and soda. In each case, the fluorescent emission was excited by either green or violet-blue laser light. In this paper, we examine the fluorescent emission spectra of so-called neon colored papers and plastic clipboards available in department and…

  16. Accountability: Papers from master theses 2009

    NARCIS (Netherlands)

    C.D. Knoops (Chris); J. Noeverman (Jan)

    2010-01-01

    textabstractLast year, we presented the book “Accountability 2008: papers from master theses”. The book contained eleven papers. Each paper was based on a thesis in the field of Accounting, Auditing and Control, on which these students received a Master’s degree in Economics & Business from the

  17. 12 CFR 541.5 - Commercial paper.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Commercial paper. 541.5 Section 541.5 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY DEFINITIONS FOR REGULATIONS AFFECTING FEDERAL SAVINGS ASSOCIATIONS § 541.5 Commercial paper. The term commercial paper means any note, draft, or...

  18. 7 CFR 51.1240 - Paper ends.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Paper ends. 51.1240 Section 51.1240 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Cleaned Virginia Type Peanuts in the Shell Definitions § 51.1240 Paper ends. Paper ends means...

  19. [Renal patient's diet: Can fish be included?].

    Science.gov (United States)

    Castro González, M I; Maafs Rodríguez, A G; Galindo Gómez, C

    2012-01-01

    Medical and nutritional treatment for renal disease, now a major public health issue, is highly complicated. Nutritional therapy must seek to retard renal dysfunction, maintain an optimal nutritional status and prevent the development of underlying pathologies. To analyze ten fish species to identify those that, because of their low phosphorus content, high biological value protein and elevated n-3 fatty acids EPA and DHA, could be included in renal patient's diet. The following fish species (Litte tunny, Red drum, Spotted eagleray, Escolar, Swordfish, Big-scale pomfret, Cortez flounder, Largemouth blackbass, Periche mojarra, Florida Pompano) were analyzed according to the AOAC and Keller techniques to determine their protein, phosphorus, sodium, potassium, cholesterol, vitamins D(3) and E, and n-3 EPA+DHA content. These results were used to calculate relations between nutrients. The protein in the analyzed species ranged from 16.5 g/100 g of fillet (Largemouth black bass) to 27.2 g/100 g (Red drum); the lowest phosphorus value was 28.6 mg/100 g (Periche mojarra) and the highest 216.3 mg/100 g (Spotted eagle ray). 80% of the fish presented > 100 mg EPA + DHA in 100 g of fillet. By its Phosphorus/gProtein ratio, Escolar and Swordfish could not be included in the renal diet; Little tunny, Escolar, Big-scale pomfret, Largemouth black-bass, Periche mojarra and Florida Pompano presented a lower Phosphorus/EPA + DHA ratio. Florida pompano is the most recommended specie for renal patients, due to its optimal nutrient relations. However, all analyzed species, except Escolar and Swordfish, could be included in renal diets.

  20. Including subjectivity in the teaching of Psychopathology

    Directory of Open Access Journals (Sweden)

    Octavio Domont de Serpa Junior

    2007-01-01

    Full Text Available Current psychopathology studies have often been presented in their descriptive dimension. This perspective is important for teaching because it helps the students to recognize and identify the symptomatology of each psychopathology case. However, subjectivity, the experience of suffering and interpersonal aspects are all lost in this perspective. Coming from another psychopathology tradition - existential anthropology - this paper presents practical psychopathology teaching experience which considers such dimensions as being relevant to the understanding of mental suffering. The features and limitations of such traditions are briefly reviewed to support this teaching experience. Two new modalities of practical teaching, used in the discipline of "Special Psychopathology I" offered by the Department of Psychiatry and Forensic Medicine at the medical school of the Federal University of Rio de Janeiro for students of psychology, will be presented according to descriptive case study methodology. With these activities we also expect to change the practice of teaching. Traditionally, interviewing of in-patients by a large group of students who observe passively what is happening is the center of this kind of education. We intend to develop a model of teaching which is closer to the proposal of the Brazilian Psychiatric Reform which views mental illness as a complex phenomenon, always involving the relationship that the subject establishes with the world.

  1. MOS modeling hierarchy including radiation effects

    International Nuclear Information System (INIS)

    Alexander, D.R.; Turfler, R.M.

    1975-01-01

    A hierarchy of modeling procedures has been developed for MOS transistors, circuit blocks, and integrated circuits which include the effects of total dose radiation and photocurrent response. The models were developed for use with the SCEPTRE circuit analysis program, but the techniques are suitable for other modern computer aided analysis programs. The modeling hierarchy permits the designer or analyst to select the level of modeling complexity consistent with circuit size, parametric information, and accuracy requirements. Improvements have been made in the implementation of important second order effects in the transistor MOS model, in the definition of MOS building block models, and in the development of composite terminal models for MOS integrated circuits

  2. Drug delivery device including electrolytic pump

    KAUST Repository

    Foulds, Ian G.; Buttner, Ulrich; Yi, Ying

    2016-01-01

    Systems and methods are provided for a drug delivery device and use of the device for drug delivery. In various aspects, the drug delivery device combines a “solid drug in reservoir” (SDR) system with an electrolytic pump. In various aspects an improved electrolytic pump is provided including, in particular, an improved electrolytic pump for use with a drug delivery device, for example an implantable drug delivery device. A catalytic reformer can be incorporated in a periodically pulsed electrolytic pump to provide stable pumping performance and reduced actuation cycle.

  3. Drug delivery device including electrolytic pump

    KAUST Repository

    Foulds, Ian G.

    2016-03-31

    Systems and methods are provided for a drug delivery device and use of the device for drug delivery. In various aspects, the drug delivery device combines a “solid drug in reservoir” (SDR) system with an electrolytic pump. In various aspects an improved electrolytic pump is provided including, in particular, an improved electrolytic pump for use with a drug delivery device, for example an implantable drug delivery device. A catalytic reformer can be incorporated in a periodically pulsed electrolytic pump to provide stable pumping performance and reduced actuation cycle.

  4. Recent papers from DX-1, detonation science and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    Over the past year members of DX-1 have participated in several conferences where presentations were made and papers prepared for proceedings. There have also been several papers published in or submitted to refereed journals for publication. Rather that attach all these papers to the DX-1 Quarterly Report, we decided to put them in a Los Alamos report that could be distributed to those who get the quarterly, as well as others that have an interest in the work being done in DX-1 both inside and outside the Laboratory. This compilation does not represent all the work reported during the year because some people have chosen not to include their work here. In particular, there were a number of papers relating to deflagration-to-detonation modeling that were not included. However, this group of papers does present a good picture of much of the unclassified work being done in DX-1. Several of the papers include coauthors from other groups or divisions at the Laboratory, providing an indication of the collaborations in which people in DX-1 are involved. Discussed topics of submitted papers include: shock compression of condensed matter, pyrotechnics, shock waves, molecular spectroscopy, sound speed measurements in PBX-9501, chemical dimerization, and micromechanics of spall and damage in tantalum.

  5. Energy principle with included boundary conditions

    International Nuclear Information System (INIS)

    Lehnert, B.

    1994-01-01

    Earlier comments by the author on the limitations of the classical form of the extended energy principle are supported by a complementary analysis on the potential energy change arising from free-boundary displacements of a magnetically confined plasma. In the final formulation of the extended principle, restricted displacements, satisfying pressure continuity by means of plasma volume currents in a thin boundary layer, are replaced by unrestricted (arbitrary) displacements which can give rise to induced surface currents. It is found that these currents contribute to the change in potential energy, and that their contribution is not taken into account by such a formulation. A general expression is further given for surface currents induced by arbitrary displacements. The expression is used to reformulate the energy principle for the class of displacements which satisfy all necessary boundary conditions, including that of the pressure balance. This makes a minimization procedure of the potential energy possible, for the class of all physically relevant test functions which include the constraints imposed by the boundary conditions. Such a procedure is also consistent with a corresponding variational calculus. (Author)

  6. Addressing Stillbirth in India Must Include Men.

    Science.gov (United States)

    Roberts, Lisa; Montgomery, Susanne; Ganesh, Gayatri; Kaur, Harinder Pal; Singh, Ratan

    2017-07-01

    Millennium Development Goal 4, to reduce child mortality, can only be achieved by reducing stillbirths globally. A confluence of medical and sociocultural factors contribute to the high stillbirth rates in India. The psychosocial aftermath of stillbirth is a well-documented public health problem, though less is known of the experience for men, particularly outside of the Western context. Therefore, men's perceptions and knowledge regarding reproductive health, as well as maternal-child health are important. Key informant interviews (n = 5) were analyzed and 28 structured interviews were conducted using a survey based on qualitative themes. Qualitative themes included men's dual burden and right to medical and reproductive decision making power. Wives were discouraged from expressing grief and pushed to conceive again. If not successful, particularly if a son was not conceived, a second wife was considered a solution. Quantitative data revealed that men with a history of stillbirths had greater anxiety and depression, perceived less social support, but had more egalitarian views towards women than men without stillbirth experience. At the same time fathers of stillbirths were more likely to be emotionally or physically abusive. Predictors of mental health, attitudes towards women, and perceived support are discussed. Patriarchal societal values, son preference, deficient women's autonomy, and sex-selective abortion perpetuate the risk for future poor infant outcomes, including stillbirth, and compounds the already higher risk of stillbirth for males. Grief interventions should explore and take into account men's perceptions, attitudes, and behaviors towards reproductive decision making.

  7. Production, control and utilization of radioisotopes including radiopharmaceuticals

    International Nuclear Information System (INIS)

    Muenze, R.

    1985-05-01

    From April 29th to May 5th, 1984 27 participants from 21 developing countries stayed within an IAEA Study Tour ('Production, Control and Utilization of Radioisotopes including Radiopharmaceuticals') in the GDR. In the CINR, Rossendorf the reactor, the cyclotron, the technological centre as well as the animal test laboratory were visited. The participants were made familiar by 10 papers with the development, production and control of radiopharmaceuticals in the CINR, Rossendorf. (author)

  8. Pen-and-Paper User Interfaces

    CERN Document Server

    Steimle, Jurgen

    2012-01-01

    Even at the beginning of the 21st century, we are far from becoming paperless. Pen and paper is still the only truly ubiquitous information processing technology. Pen-and-paper user interfaces bridge the gap between paper and the digital world. Rather than replacing paper with electronic media, they seamlessly integrate both worlds in a hybrid user interface. Classical paper documents become interactive. This opens up a huge field of novel computer applications at our workplaces and in our homes. This book provides readers with a broad and extensive overview of the field, so as to provide a fu

  9. Including gauge corrections to thermal leptogenesis

    Energy Technology Data Exchange (ETDEWEB)

    Huetig, Janine

    2013-05-17

    This thesis provides the first approach of a systematic inclusion of gauge corrections to leading order to the ansatz of thermal leptogenesis. We have derived a complete expression for the integrated lepton number matrix including all resummations needed. For this purpose, a new class of diagram has been invented, namely the cylindrical diagram, which allows diverse investigations into the topic of leptogenesis such as the case of resonant leptogenesis. After a brief introduction of the topic of the baryon asymmetry in the universe and a discussion of its most promising solutions as well as their advantages and disadvantages, we have presented our framework of thermal leptogenesis. An effective model was described as well as the associated Feynman rules. The basis for using nonequilibrium quantum field theory has been built in chapter 3. At first, the main definitions have been presented for equilibrium thermal field theory, afterwards we have discussed the Kadanoff-Baym equations for systems out of equilibrium using the example of the Majorana neutrino. The equations have also been solved in the context of leptogenesis in chapter 4. Since gauge corrections play a crucial role throughout this thesis, we have also repeated the naive ansatz by replacing the free equilibrium propagator by propagators including thermal damping rates due to the Standard Model damping widths for lepton and Higgs fields. It is shown that this leads to a comparable result to the solutions of the Boltzmann equations for thermal leptogenesis. Thus it becomes obvious that Standard Model corrections are not negligible for thermal leptogenesis and therefore need to be included systematically from first principles. In order to achieve this we have started discussing the calculation of ladder rung diagrams for Majorana neutrinos using the HTL and the CTL approach in chapter 5. All gauge corrections are included in this framework and thus it has become the basis for the following considerations

  10. Including gauge corrections to thermal leptogenesis

    International Nuclear Information System (INIS)

    Huetig, Janine

    2013-01-01

    This thesis provides the first approach of a systematic inclusion of gauge corrections to leading order to the ansatz of thermal leptogenesis. We have derived a complete expression for the integrated lepton number matrix including all resummations needed. For this purpose, a new class of diagram has been invented, namely the cylindrical diagram, which allows diverse investigations into the topic of leptogenesis such as the case of resonant leptogenesis. After a brief introduction of the topic of the baryon asymmetry in the universe and a discussion of its most promising solutions as well as their advantages and disadvantages, we have presented our framework of thermal leptogenesis. An effective model was described as well as the associated Feynman rules. The basis for using nonequilibrium quantum field theory has been built in chapter 3. At first, the main definitions have been presented for equilibrium thermal field theory, afterwards we have discussed the Kadanoff-Baym equations for systems out of equilibrium using the example of the Majorana neutrino. The equations have also been solved in the context of leptogenesis in chapter 4. Since gauge corrections play a crucial role throughout this thesis, we have also repeated the naive ansatz by replacing the free equilibrium propagator by propagators including thermal damping rates due to the Standard Model damping widths for lepton and Higgs fields. It is shown that this leads to a comparable result to the solutions of the Boltzmann equations for thermal leptogenesis. Thus it becomes obvious that Standard Model corrections are not negligible for thermal leptogenesis and therefore need to be included systematically from first principles. In order to achieve this we have started discussing the calculation of ladder rung diagrams for Majorana neutrinos using the HTL and the CTL approach in chapter 5. All gauge corrections are included in this framework and thus it has become the basis for the following considerations

  11. Two-fluid turbulence including electron inertia

    Energy Technology Data Exchange (ETDEWEB)

    Andrés, Nahuel, E-mail: nandres@iafe.uba.ar; Gómez, Daniel [Instituto de Astronomía y Física del Espacio, CC. 67, suc. 28, 1428 Buenos Aires (Argentina); Departamento de Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Pabellón I, 1428 Buenos Aires (Argentina); Gonzalez, Carlos; Martin, Luis; Dmitruk, Pablo [Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires and IFIBA, CONICET, 1428 Buenos Aires (Argentina)

    2014-12-15

    We present a full two-fluid magnetohydrodynamic (MHD) description for a completely ionized hydrogen plasma, retaining the effects of the Hall current, electron pressure, and electron inertia. According to this description, each plasma species introduces a new spatial scale: the ion inertial length λ{sub i} and the electron inertial length λ{sub e}, which are not present in the traditional MHD description. In the present paper, we seek for possible changes in the energy power spectrum in fully developed turbulent regimes, using numerical simulations of the two-fluid equations in two-and-a-half dimensions. We have been able to reproduce different scaling laws in different spectral ranges, as it has been observed in the solar wind for the magnetic energy spectrum. At the smallest wavenumbers where plain MHD is valid, we obtain an inertial range following a Kolmogorov k{sup −5∕3} law. For intermediate wavenumbers such that λ{sub i}{sup −1}≪k≪λ{sub e}{sup −1}, the spectrum is modified to a k{sup −7∕3} power-law, as has also been obtained for Hall-MHD neglecting electron inertia terms. When electron inertia is retained, a new spectral region given by k>λ{sub e}{sup −1} arises. The power spectrum for magnetic energy in this region is given by a k{sup −11∕3} power law. Finally, when the terms of electron inertia are retained, we study the self-consistent electric field. Our results are discussed and compared with those obtained in the solar wind observations and previous simulations.

  12. Neutrino radiation hazards: A paper tiger

    International Nuclear Information System (INIS)

    Cossairt, J.D.; Grossman, N.L.; Marshall, E.T.

    1996-09-01

    Neutrinos are present in the natural environment due to terrestrial, solar, and cosmic sources and are also produced at accelerators both incidentally and intentionally as part of physics research programs. Progress in fundamental physics research has led to the creation of beams of neutrinos of ever-increasing intensity and/or energy. The large size and cost associated with these beams attracts, and indeed requires, public interest, support, and some understanding of the 'exotic' particles produced, including the neutrinos. Furthermore, the very word neutrino ('little neutral one', as coined by Enrico Fermi) can lead to public concern due to confusion with 'neutron', a word widely associated with radiological hazards. Adding to such possible concerns is a recent assertion, widely publicized, that neutrinos from astronomical events may have led to the extinction of some biological species. Presented here are methods for conservatively estimating the dose equivalent due to neutrinos as well as an assessment of the possible role of neutrinos in biological extinction processes. It is found that neutrinos produced by the sun and modern particle accelerators produce inconsequential dose equivalent rates. Examining recent calculations concerning neutrinos incident upon the earth due to stellar collapse, it is concluded that it is highly unlikely that these neutrinos caused the mass extinctions of species found in the paleontological record. Neutrino radiation hazards are, then, truly a 'paper tiger'. 14 refs., 1 fig., 1 tab

  13. Editorial highlighting and highly cited papers

    Science.gov (United States)

    Antonoyiannakis, Manolis

    Editorial highlighting-the process whereby journal editors select, at the time of publication, a small subset of papers that are ostensibly of higher quality, importance or interest-is by now a widespread practice among major scientific journal publishers. Depending on the venue, and the extent to which editorial resources are invested in the process, highlighted papers appear as News & Views, Research Highlights, Perspectives, Editors' Choice, IOP Select, Editors' Summary, Spotlight on Optics, Editors' Picks, Viewpoints, Synopses, Editors' Suggestions, etc. Here, we look at the relation between highlighted papers and highly influential papers, which we define at two levels: having received enough citations to be among the (i) top few percent of their journal, and (ii) top 1% of all physics papers. Using multiple linear regression and multilevel regression modeling we examine the parameters associated with highly influential papers. We briefly comment on cause and effect relationships between citedness and highlighting of papers.

  14. Design and analysis of sustainable paper bicycle

    Science.gov (United States)

    Roni Sahroni, Taufik; Nasution, Januar

    2017-12-01

    This paper presents the design of sustainable paper bicycle which describes the stage by stage in the production of paper bicycle. The objective of this project is to design a sustainable paper bicycles to be used for children under five years old. The design analysis emphasizes in screening method to ensure the design fulfil the safety purposes. The evaluation concept is presented in designing a sustainable paper bicycle to determine highest rating. Project methodology is proposed for developing a sustainable paper bicycle. Design analysis of pedal, front and rear wheel, seat, and handle were presented using AutoCAD software. The design optimization was performed to fulfil the safety factors by modifying the material size and dimension. Based on the design analysis results, it is found that the optimization results met the factor safety. As a result, a sustainable paper bicycle was proposed for children under five years old.

  15. The surgery of peripheral nerves (including tumors)

    DEFF Research Database (Denmark)

    Fugleholm, Kåre

    2013-01-01

    Surgical pathology of the peripheral nervous system includes traumatic injury, entrapment syndromes, and tumors. The recent significant advances in the understanding of the pathophysiology and cellular biology of peripheral nerve degeneration and regeneration has yet to be translated into improved...... surgical techniques and better outcome after peripheral nerve injury. Decision making in peripheral nerve surgery continues to be a complex challenge, where the mechanism of injury, repeated clinical evaluation, neuroradiological and neurophysiological examination, and detailed knowledge of the peripheral...... nervous system response to injury are prerequisite to obtain the best possible outcome. Surgery continues to be the primary treatment modality for peripheral nerve tumors and advances in adjuvant oncological treatment has improved outcome after malignant peripheral nerve tumors. The present chapter...

  16. AMS at the ANU including biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Fifield, L K; Allan, G L; Cresswell, R G; Ophel, T R [Australian National Univ., Canberra, ACT (Australia); King, S J; Day, J P [Manchester Univ. (United Kingdom). Dept. of Chemistry

    1994-12-31

    An extensive accelerator mass spectrometry program has been conducted on the 14UD accelerator at the Australian National University since 1986. In the two years since the previous conference, the research program has expanded significantly to include biomedical applications of {sup 26}Al and studies of landform evolution using isotopes produced in situ in surface rocks by cosmic ray bombardment. The system is now used for the measurement of {sup 10}Be, {sup 14}C, {sup 26}Al, {sup 36}Cl, {sup 59}Ni and {sup 129}I, and research is being undertaken in hydrology, environmental geochemistry, archaeology and biomedicine. On the technical side, a new test system has permitted the successful off-line development of a high-intensity ion source. A new injection line to the 14UD has been established and the new source is now in position and providing beams to the accelerator. 4 refs.

  17. AMS at the ANU including biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Fifield, L.K.; Allan, G.L.; Cresswell, R.G.; Ophel, T.R. [Australian National Univ., Canberra, ACT (Australia); King, S.J.; Day, J.P. [Manchester Univ. (United Kingdom). Dept. of Chemistry

    1993-12-31

    An extensive accelerator mass spectrometry program has been conducted on the 14UD accelerator at the Australian National University since 1986. In the two years since the previous conference, the research program has expanded significantly to include biomedical applications of {sup 26}Al and studies of landform evolution using isotopes produced in situ in surface rocks by cosmic ray bombardment. The system is now used for the measurement of {sup 10}Be, {sup 14}C, {sup 26}Al, {sup 36}Cl, {sup 59}Ni and {sup 129}I, and research is being undertaken in hydrology, environmental geochemistry, archaeology and biomedicine. On the technical side, a new test system has permitted the successful off-line development of a high-intensity ion source. A new injection line to the 14UD has been established and the new source is now in position and providing beams to the accelerator. 4 refs.

  18. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of the "LabView Basic I" and "LabView Intermediate II" courses have recently been changed to include, respectively, an introduction to and expert training in the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to developing expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course pr...

  19. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of the "LabView Basic I" and "LabView Intermediate II" courses have recently been changed to include, respectively, an introduction to and expert training in the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to developing expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course prepares participants to develop test and measurement, da...

  20. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of "LabView Basic I" and "LabView Intermediate II" trainings have been recently changed to include, respectively, an introduction and an expert training on the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to develop expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course prepare...

  1. Critical point anomalies include expansion shock waves

    Energy Technology Data Exchange (ETDEWEB)

    Nannan, N. R., E-mail: ryan.nannan@uvs.edu [Mechanical Engineering Discipline, Anton de Kom University of Suriname, Leysweg 86, PO Box 9212, Paramaribo, Suriname and Process and Energy Department, Delft University of Technology, Leeghwaterstraat 44, 2628 CA Delft (Netherlands); Guardone, A., E-mail: alberto.guardone@polimi.it [Department of Aerospace Science and Technology, Politecnico di Milano, Via La Masa 34, 20156 Milano (Italy); Colonna, P., E-mail: p.colonna@tudelft.nl [Propulsion and Power, Delft University of Technology, Kluyverweg 1, 2629 HS Delft (Netherlands)

    2014-02-15

    From first-principle fluid dynamics, complemented by a rigorous state equation accounting for critical anomalies, we discovered that expansion shock waves may occur in the vicinity of the liquid-vapor critical point in the two-phase region. Due to universality of near-critical thermodynamics, the result is valid for any common pure fluid in which molecular interactions are only short-range, namely, for so-called 3-dimensional Ising-like systems, and under the assumption of thermodynamic equilibrium. In addition to rarefaction shock waves, diverse non-classical effects are admissible, including composite compressive shock-fan-shock waves, due to the change of sign of the fundamental derivative of gasdynamics.

  2. CLIC expands to include the Southern Hemisphere

    CERN Multimedia

    Roberto Cantoni

    2010-01-01

    Australia has recently joined the CLIC collaboration: the enlargement will bring new expertise and resources to the project, and is especially welcome in the wake of CERN budget redistributions following the recent adoption of the Medium Term Plan.   The countries involved in CLIC collaboration With the signing of a Memorandum of Understanding on 26 August 2010, the ACAS network (Australian Collaboration for Accelerator Science) became the 40th member of in the multilateral CLIC collaboration making Australia the 22nd country to join the collaboration. “The new MoU was signed by the ACAS network, which includes the Australian Synchrotron and the University of Melbourne”, explains Jean-Pierre Delahaye, CLIC Study Leader. “Thanks to their expertise, the Australian institutes will contribute greatly to the CLIC damping rings and the two-beam test modules." Institutes from any country wishing to join the CLIC collaboration are invited to assume responsibility o...

  3. Musculoskeletal ultrasound including definitions for ultrasonographic pathology

    DEFF Research Database (Denmark)

    Wakefield, RJ; Balint, PV; Szkudlarek, Marcin

    2005-01-01

    Ultrasound (US) has great potential as an outcome in rheumatoid arthritis trials for detecting bone erosions, synovitis, tendon disease, and enthesopathy. It has a number of distinct advantages over magnetic resonance imaging, including good patient tolerability and ability to scan multiple joints...... in a short period of time. However, there are scarce data regarding its validity, reproducibility, and responsiveness to change, making interpretation and comparison of studies difficult. In particular, there are limited data describing standardized scanning methodology and standardized definitions of US...... pathologies. This article presents the first report from the OMERACT ultrasound special interest group, which has compared US against the criteria of the OMERACT filter. Also proposed for the first time are consensus US definitions for common pathological lesions seen in patients with inflammatory arthritis....

  4. Grand unified models including extra Z bosons

    International Nuclear Information System (INIS)

    Li Tiezhong

    1989-01-01

    The grand unified theories (GUT) of the simple Lie groups including extra Z bosons are discussed. Under authors's hypothesis there are only SU 5+m SO 6+4n and E 6 groups. The general discussion of SU 5+m is given, then the SU 6 and SU 7 are considered. In SU 6 the 15+6 * +6 * fermion representations are used, which are not same as others in fermion content, Yukawa coupling and broken scales. A conception of clans of particles, which are not families, is suggested. These clans consist of extra Z bosons and the corresponding fermions of the scale. The all of fermions in the clans are down quarks except for the standard model which consists of Z bosons and 15 fermions, therefore, the spectrum of the hadrons which are composed of these down quarks are different from hadrons at present

  5. Including climate change in energy investment decisions

    International Nuclear Information System (INIS)

    Ybema, J.R.; Boonekamp, P.G.M.; Smit, J.T.J.

    1995-08-01

    To properly take climate change into account in the analysis of energy investment decisions, it is required to apply decision analysis methods that are capable of considering the specific characteristics of climate change (large uncertainties, long term horizon). Such decision analysis methods do exist. They can explicitly include evolving uncertainties, multi-stage decisions, cumulative effects and risk averse attitudes. Various methods are considered in this report and two of these methods have been selected: hedging calculations and sensitivity analysis. These methods are applied to illustrative examples, and its limitations are discussed. The examples are (1a) space heating and hot water for new houses from a private investor perspective and (1b) as example (1a) but from a government perspective, (2) electricity production with an integrated coal gasification combined cycle (ICGCC) with or without CO 2 removal, and (3) national energy strategy to hedge for climate change. 9 figs., 21 tabs., 42 refs., 1 appendix

  6. Education Program on Fossil Resources Including Coal

    Science.gov (United States)

    Usami, Masahiro

    Fossil fuels including coal play a key role as crucial energies in contributing to economic development in Asia. On the other hand, its limited quantity and the environmental problems causing from its usage have become a serious global issue and a countermeasure to solve such problems is very much demanded. Along with the pursuit of sustainable development, environmentally-friendly use of highly efficient fossil resources should be therefore, accompanied. Kyushu-university‧s sophisticated research through long years of accumulated experience on the fossil resources and environmental sectors together with the advanced large-scale commercial and empirical equipments will enable us to foster cooperative research and provide internship program for the future researchers. Then, this program is executed as a consignment business from the Ministry of Economy, Trade and Industry from 2007 fiscal year to 2009 fiscal year. The lecture that uses the textbooks developed by this program is scheduled to be started a course in fiscal year 2010.

  7. Analysis of Smart Composite Structures Including Debonding

    Science.gov (United States)

    Chattopadhyay, Aditi; Seeley, Charles E.

    1997-01-01

    Smart composite structures with distributed sensors and actuators have the capability to actively respond to a changing environment while offering significant weight savings and additional passive controllability through ply tailoring. Piezoelectric sensing and actuation of composite laminates is the most promising concept due to the static and dynamic control capabilities. Essential to the implementation of these smart composites are the development of accurate and efficient modeling techniques and experimental validation. This research addresses each of these important topics. A refined higher order theory is developed to model composite structures with surface bonded or embedded piezoelectric transducers. These transducers are used as both sensors and actuators for closed loop control. The theory accurately captures the transverse shear deformation through the thickness of the smart composite laminate while satisfying stress free boundary conditions on the free surfaces. The theory is extended to include the effect of debonding at the actuator-laminate interface. The developed analytical model is implemented using the finite element method utilizing an induced strain approach for computational efficiency. This allows general laminate geometries and boundary conditions to be analyzed. The state space control equations are developed to allow flexibility in the design of the control system. Circuit concepts are also discussed. Static and dynamic results of smart composite structures, obtained using the higher order theory, are correlated with available analytical data. Comparisons, including debonded laminates, are also made with a general purpose finite element code and available experimental data. Overall, very good agreement is observed. Convergence of the finite element implementation of the higher order theory is shown with exact solutions. Additional results demonstrate the utility of the developed theory to study piezoelectric actuation of composite

  8. Avoiding Plagiarism in Writing a Research Paper

    Directory of Open Access Journals (Sweden)

    Majid Wajdi

    2018-03-01

    Full Text Available This paper discusses how to avoid plagiarism in a research paper. Avoiding plagiarism is part of a scientific writing ethic that always stated in any publication. Every writer should pay attention to their papers submitted to a journal or a scientific forum that they are free from unethical conduct. Writing a research paper needs overall accuracy especially in avoiding plagiarism in the paper that is to be published in a journal or to be presented at a certain scientific meeting, seminar or symposium. It is based on writers’ experience as a paper writer as well as a journal reviewer. The first application that the writers use is ‘checker’, a Mac computer application, used to check spelling and grammar. It assists the writers to check how misspelling and an ungrammatical inaccuracy in the writers’ papers. The second free application is ‘plagiarism checker’. Checking originality of a paper is essential and it is not too difficult to do today. It is freely accessible that plagiarism checker can be used to check how original the paper is. By visiting “Google” then write down ‘plagiarism checker’, it will appear ‘smallseatools’ and then the writers could choose and check how original the paper is. This application is freely accessed and helps immensely to check how original a paper is and how far a paper is free from plagiarism. The unoriginal phrase will be underlined and marked red and finally will be shown how inimitable the paper is. Plagiarism scan report which consists of the date of the report, plagiarism status, total words and total characters can be downloaded.

  9. Probabilistic production simulation including CHP plants

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, H.V.; Palsson, H.; Ravn, H.F.

    1997-04-01

    A probabilistic production simulation method is presented for an energy system containing combined heat and power plants. The method permits incorporation of stochastic failures (forced outages) of the plants and is well suited for analysis of the dimensioning of the system, that is, for finding the appropriate types and capacities of production plants in relation to expansion planning. The method is in the tradition of similar approaches for the analysis of power systems, based on the load duration curve. The present method extends on this by considering a two-dimensional load duration curve where the two dimensions represent heat and power. The method permits the analysis of a combined heat and power system which includes all the basic relevant types of plants, viz., condensing plants, back pressure plants, extraction plants and heat plants. The focus of the method is on the situation where the heat side has priority. This implies that on the power side there may be imbalances between demand and production. The method permits quantification of the expected power overflow, the expected unserviced power demand, and the expected unserviced heat demand. It is shown that a discretization method as well as double Fourier series may be applied in algorithms based on the method. (au) 1 tab., 28 ills., 21 refs.

  10. Langevin simulations of QCD, including fermions

    International Nuclear Information System (INIS)

    Kronfeld, A.S.

    1986-02-01

    We encounter critical slow down in updating when xi/a -> infinite and in matrix inversion (needed to include fermions) when msub(q)a -> 0. A simulation that purports to solve QCD numerically will encounter these limits, so to face the challenge in the title of this workshop, we must cure the disease of critical slow down. Physically, this critical slow down is due to the reluctance of changes at short distances to propagate to large distances. Numerically, the stability of an algorithm at short wavelengths requires a (moderately) small step size; critical slow down occurs when the effective long wavelength step size becomes tiny. The remedy for this disease is an algorithm that propagates signals quickly throughout the system; i.e. one whose effective step size is not reduced for the long wavelength conponents of the fields. (Here the effective ''step size'' is essentially an inverse decorrelation time.) To do so one must resolve various wavelengths of the system and modify the dynamics (in CPU time) of the simulation so that all modes evolve at roughly the same rate. This can be achieved by introducing Fourier transforms. I show how to implement Fourier acceleration for Langevin updating and for conjugate gradient matrix inversion. The crucial feature of these algorithms that lends them to Fourier acceleration is that they update the lattice globally; hence the Fourier transforms are computed once per sweep rather than once per hit. (orig./HSI)

  11. WATER RESISTANCE OF RECYCLED PAPER PANEL

    Directory of Open Access Journals (Sweden)

    Alexander Rani Suryandono

    2017-06-01

    Alice Wisler (2015 Facts about Recycling Paper. http://greenliving.lovetoknow.com/Facts_About_Recycling_Paper. Accessed 2 April 2016 Clay Miller (2011 5 Benefits of Recycling Paper. http://www.ways2gogreenblog.com/2011/09/28/5-benefits-of-recycling-paper/. Accessed 10 May 2016 Hari Goyal (2015 Grades of Paper. http://www.paperonweb.com/grade.htm. Accessed 2 April 2016 Hari Goyal (2015 Properties of Paper. http://www.paperonweb.com/paperpro.htm. Accessed 2 April 2016 Kathryn Sukalich (2016 Everything You Need to Know about Paper Recycling. http://earth911.com/business-policy/business/paper-recycling-details-basics/. Accessed 15 July 2016 [U1] Larry West (2015 Why Recycle Paper. http://environment.about.com/od/recycling/a/The-Benefits-Of-Paper-Recycling-Why-Recycle-Paper.htm. Accesed 15 June 2016 Marie-Luise Blue (2008 The Advantages of Recycling Paper. http://education.seattlepi.com/advantages-recycling-paper-3440.html. Accessed 15 June 2016 Nina Spitzer (2009 http://www.sheknows.com/home-and-gardening/articles/810025/the-impact-of-disposable-coffee-cups-on-the-environment. Accessed 15 June 2016 Radio New Zealand (2010 Iwi not Giving Up Fight against Tasman Mill Discharges. http://www.radionz.co.nz/news/regional/64521/iwi-not-giving-up-fight-against-tasman-mill-discharges. Accessed 15 July 2016 Rick LeBlanc (2016 Paper Recycling Facts, Figures and Information Sources. https://www.thebalance.com/paper-recycling-facts-figures-and-information-sources-2877868?_ga=1.192832942.544061388.1477446686. Accesed 2 April 2016 Robinson Meyer (2016 Will More Newspapers Go Nonprofit? http://www.theatlantic.com/technology/archive/2016/01/newspapers-philadelphia-inquirer-daily-news-nonprofit-lol-taxes/423960/. Accessed 3 August 2016 School of Engineering at Darthmouth (2010 Forest and Paper Industry. http://engineering.dartmouth.edu/~d30345d/courses/engs171/Paper.pdf. Accessed 2 April 2016 T. Subramani, V. Angappan. (2015. Experimental Investigation of Papercrete Concrete

  12. Reinforced Conductive Polyaniline-Paper Composites

    Directory of Open Access Journals (Sweden)

    Jinhua Yan

    2015-05-01

    Full Text Available A method for direct aniline interfacial polymerization on polyamideamine-epichlorohydrin (PAE-reinforced paper substrate is introduced in this paper. Cellulose-based papers with and without reinforcement were considered. The polyaniline (PANI-paper composites had surface resistivity lower than 100 Ω/sq after more than 3 polymerizations. Their mechanical strength and thermal stability were analyzed by tensile tests and thermogravimetric analysis (TGA. Fourier transform infrared (FTIR results revealed that there was strong interaction between NH groups in aniline monomers and OH groups in fibers, which did not disappear until after 3 polymerizations. Scanning electron microscopy (SEM and field emission (FE SEM images showed morphological differences between composites using reinforced and untreated base papers. Conductive composites made with PAE-reinforced base paper had both good thermal stability and good mechanical strength, with high conductivity and a smaller PANI amount.

  13. SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE

    International Nuclear Information System (INIS)

    C. Tsang

    2004-01-01

    The purpose of this report is to document the predictions and analyses performed using the seepage model for performance assessment (SMPA) for both the Topopah Spring middle nonlithophysal (Tptpmn) and lower lithophysal (Tptpll) lithostratigraphic units at Yucca Mountain, Nevada. Look-up tables of seepage flow rates into a drift (and their uncertainty) are generated by performing numerical simulations with the seepage model for many combinations of the three most important seepage-relevant parameters: the fracture permeability, the capillary-strength parameter 1/a, and the percolation flux. The percolation flux values chosen take into account flow focusing effects, which are evaluated based on a flow-focusing model. Moreover, multiple realizations of the underlying stochastic permeability field are conducted. Selected sensitivity studies are performed, including the effects of an alternative drift geometry representing a partially collapsed drift from an independent drift-degradation analysis (BSC 2004 [DIRS 166107]). The intended purpose of the seepage model is to provide results of drift-scale seepage rates under a series of parameters and scenarios in support of the Total System Performance Assessment for License Application (TSPA-LA). The SMPA is intended for the evaluation of drift-scale seepage rates under the full range of parameter values for three parameters found to be key (fracture permeability, the van Genuchten 1/a parameter, and percolation flux) and drift degradation shape scenarios in support of the TSPA-LA during the period of compliance for postclosure performance [Technical Work Plan for: Performance Assessment Unsaturated Zone (BSC 2002 [DIRS 160819], Section I-4-2-1)]. The flow-focusing model in the Topopah Spring welded (TSw) unit is intended to provide an estimate of flow focusing factors (FFFs) that (1) bridge the gap between the mountain-scale and drift-scale models, and (2) account for variability in local percolation flux due to

  14. Establishing the irradiation dose for paper decontamination

    International Nuclear Information System (INIS)

    Moise, Ioan Valentin; Virgolici, Marian; Negut, Constantin Daniel; Manea, Mihaela; Alexandru, Mioara; Trandafir, Laura; Zorila, Florina Lucica; Talasman, Catalina Mihaela; Manea, Daniela; Nisipeanu, Steluta; Haiducu, Maria; Balan, Zamfir

    2012-01-01

    Museums, libraries and archives are preserving documents that are slowly degrading due to the inherent ageing of the cellulose substrate or to the technological errors of the past (acid paper, iron gall ink). Beside this, large quantities of paper are rapidly damaged by biological attacks following natural disasters and improper storage conditions. The treatment of paper documents with ionizing radiation can be used for mass decontamination of cultural heritage items but conservators and restaurators are still reserved because of the radiation induced degradation. We conducted a study for establishing the dose needed for the effective treatment of paper documents, taking into account the biological burden and the irradiation effects on paper structure. We used physical testing specific to paper industry and less destructive analytical methods (thermal analysis). Our results show that an effective treatment can be performed with doses lower than 10 kGy. Old paper appears to be less affected by gamma radiation than recent paper but the sampling is highly affected by the non-uniform degree of the initial degradation status. The extent of testing for degradation and the magnitude of acceptable degradation should take into account the biological threat and the expected life time of the paper documents. - RESEARCH HIGHLIGHTS: ► For doses <15 kGy, the measurement uncertainty of mechanical properties is higher than the radiation induced degradation. ► The statistics of measuring induced degradation may be improved by testing both mechanical properties and thermal decomposition of paper. ►Because of the large variability of paper samples, testing to only one irradiation dose has no or reduced relevance. ►It was choused for the irradiation of paper items from archives and collections a dose range of 5–7 kGy.

  15. Free radicals induced archive paper by irradiation

    International Nuclear Information System (INIS)

    Cutrubinis, M.; Moise, I.V.; Negut, C.D.; Georgescu, R.; Suvaila, R.; Virgolici, M.; Manea, M.M.

    2011-01-01

    Complete text of publication follows. Irradiation of archive paper (document archives of institutions, companies etc. and library or museum collections of books and documents) can solve the problems related to the bio-deterioration and bio-contamination of paper and sometimes save valuable cultural heritage paper items. For valuable paper items care should be taken to the degradation induced instantly by the ionising radiation to the cellulosic support and also to the long term post-irradiation effects. The free radicals formed due to the irradiation treatment could contribute to instant degradation of paper. Part of them are also trapped for months and years after irradiation and they could be related to the post-irradiation effects in paper items. In this study, different sorts of cellulosic support samples (soft wood and hard wood cellulose, contemporary paper, paper from archives and from collections etc.) have been irradiated with dosis up to 100 kGy and the radiation induced free radicals have been measured by ESR spectrometry. The ESR signals have shown the type and quantity of radiation induced free radicals. Their study can be used for a realistic estimation of the degradative effect of the ionising radiation treatment of archive paper.

  16. Scientific research attitude and paper writing

    International Nuclear Information System (INIS)

    Park, Yeon Ho; Shin, Dae Sun; Lee, Gyeong Ja

    1982-08-01

    This book introduces meanings and kinds of paper, structures and characteristics of paper, preparation of writing paper, writing paper, comments and footnotes, how to collect materials, and list of reference and appendix. It explains composition of chapters and paragraphs and development of contents, how to use library materials, writing draft, usage of quotations and comments, mathematical tables and charts, completing draft, basic principle of footnotes and how to fill up them, survey method, survey design, experimental methods, and real examples of comments and references.

  17. Parallel Architectures for Planetary Exploration Requirements (PAPER)

    Science.gov (United States)

    Cezzar, Ruknet

    1993-01-01

    The project's main contributions have been in the area of student support. Throughout the project, at least one, in some cases two, undergraduate students have been supported. By working with the project, these students gained valuable knowledge involving the scientific research project, including the not-so-pleasant reporting requirements to the funding agencies. The other important contribution was towards the establishment of a graduate program in computer science at Hampton University. Primarily, the PAPER project has served as the main research basis in seeking funds from other agencies, such as the National Science Foundation, for establishing a research infrastructure in the department. In technical areas, especially in the first phase, we believe the trip to Jet Propulsion Laboratory, and gathering together all the pertinent information involving experimental computer architectures aimed for planetary explorations was very helpful. Indeed, if this effort is to be revived in the future due to congressional funding for planetary explorations, say an unmanned mission to Mars, our interim report will be an important starting point. In other technical areas, our simulator has pinpointed and highlighted several important performance issues related to the design of operating system kernels for MIMD machines. In particular, the critical issue of how the kernel itself will run in parallel on a multiple-processor system has been addressed through the various ready list organization and access policies. In the area of neural computing, our main contribution was an introductory tutorial package to familiarize the researchers at NASA with this new and promising field zone axes (20). Finally, we have introduced the notion of reversibility in programming systems which may find applications in various areas of space research.

  18. Green paper on energy and climate change

    International Nuclear Information System (INIS)

    Peters, R.; Whitmore, J.; Shariff, N.

    2005-11-01

    This green paper was created by the Canadian Environmental Network to initiate a dialogue on climate change and energy issues. Recommendations for energy strategies for Canada beyond 2012 were presented. An overview of recent climate science was presented, as well as various stabilization scenarios needed to prevent further climate change. A review of global energy trends working for and against action to prevent climate change was also provided. It was suggested that the stabilization of greenhouse gas (GHG) concentrations can only be achieved when the United States and large developing economies such as China, India and Brazil transform themselves into renewable-energy based economies. Renewable energy and energy efficiency must play a central role in future climate change regimes. It was suggested that nuclear power cannot be considered as an option to reduce GHGs due to its high cost, and on-going public concerns over long-term waste disposal, fuel-cycle health and safety. A viable global framework for stabilizing GHG concentrations built on the current regimes of the United Nations Framework Convention on Climate Change and the Kyoto Protocol was recommended. It was suggested that richer industrialized nations must take the lead by pursuing absolute reductions and providing assistance to developing nations for mitigation and adaptation to climate change. It was recommended that developing nations should contribute to global mitigation efforts by pursuing low-carbon intensity development paths, and that effective climate change policies must address the economic barriers faced by developing nations. Other recommendations included a regulatory regime for major energy producers and users incorporating progressively lower GHG emission targets; the elimination of all subsidies for the fossil fuel and nuclear fuel-cycle and power industries; the adoption of a national renewable energy strategy; the implementation of a national energy conservation and efficiency

  19. Conceiving, Writing and Publishing a Scientific Paper

    Directory of Open Access Journals (Sweden)

    Marta Christina Suciu

    2018-02-01

    Full Text Available I consider that the second edition of the book “Conceiving, Writing and Publishing a Scientific Paper. An approach in the context of economic research” is a work of high scientific standing, excellently documented, addressed to knowledgeable readers but also to the new generations of PhD students and researchers interested in attaining the highest academic and scientific performances in the field of Economics. From my point of view, both editions of the book are highly useful for the academic environment. I especially appreciate the authors’ efforts to improve and expand the second edition. This fact is due to the changes occurred in the evolution of scientometric indicators, to the feedback received from readers, but also as the result of the desire to include multiple networks and platforms that take into account professional and institutional profiles, such as to facilitate the researchers’ dissemination of their results obtained in the scientific research activity. The authors benefit on an unanimous recognition and are highly appreciated., fact proven for example by the ten existing reviews of the book’s first edition, published in journals indexed in Web of Science, Scopus and other international databases. I am mostly impressed by the authors’ permanent concern to improve their book’s scientific content. The first edition was awarded the distinction “The Best Book in the Field of Economics” published in 2016 in Romania by the Association of Romanian Economic Faculties, but also by The Association of Cultural-Educational Cooperation from Suceava (ACCES prize in 2016

  20. How to Write Geography Teaching Paper

    Science.gov (United States)

    Liu, Hua; Li, Lu

    2011-01-01

    Geography teaching paper is the paper especially to describe geography teaching reform and research achievement, its main purpose is to find solution to handle questions encountered in teaching through personal teaching practice, constant trying and exploration, and to scientifically summarize the procedure and methods to deal with the problem,…

  1. Accountability: Papers from master theses 2008

    NARCIS (Netherlands)

    C.D. Knoops (Chris); J. Noeverman (Jan)

    2009-01-01

    textabstractWe are proud to be able to present this book, the first volume of what we intend to become an annual book series. This year’s edition contains eleven papers. Each paper is based on a thesis in the field of Accounting, Auditing and Control, on which these students received a Master’s

  2. Selected papers on probability and statistics

    CERN Document Server

    2009-01-01

    This volume contains translations of papers that originally appeared in the Japanese journal Sūgaku. The papers range over a variety of topics in probability theory, statistics, and applications. This volume is suitable for graduate students and research mathematicians interested in probability and statistics.

  3. Mathematical modelling of wet paper pressing

    NARCIS (Netherlands)

    Bežanovic, D.

    2005-01-01

    The aim of this project is to reduce energy costs in paper production by optimising the process in the press section of a paper machine. In this press section water is squeezed as it passes through the press nip. In a modern press section the moisture content of the sheet after three or four presses

  4. Papers from the International Conference on Comparative ...

    African Journals Online (AJOL)

    on different specific themes and four poster sessions gener- ally coordinated with each day's themes. The following nine papers are a representative sample of both plenary and review papers presented. Comparative animal physiology and biochemistry are areas of study largely concerned with the ways in which diverse.

  5. Mixed waste paper as a fuel

    International Nuclear Information System (INIS)

    Kersletter, J.D.; Lyons, J.K.

    1991-01-01

    A successful recycling program requires several components: education and promotion, convenient collection service, and most importantly, a market for collected materials. In Washington state, domestic markets currently have, or are building, the capacity to use most of the glass, newsprint, aluminum, tin cans, and corrugated materials that are collected. Unfortunately, markets for mixed waste paper (MWP), a major component of the state's solid waste stream, have been slow to develop and are unable to absorb the tremendous volumes of material generated. The American Paper Stock Institute classifies MWP as low grade paper such as magazines, books, scrap paper, non-corrugated cardboard (boxboard/chipboard), and construction paper. When viewed as part of a curbside collection program MWP consists primarily of catalogs, binder paper, magazines, brochures, junk mail, cereal boxes, and other household packaging items. A comprehensive analysis of Washington State's solid waste stream showed that during 1988, Washington citizens generated approximately 460,000 tons of mixed waste paper. No small amount, this is equivalent to more than 10% of the total solid waste generated in the state, and is expected to increase. Current projections of MWP generation rates indicated that Washington citizens could discard as much as 960,000 tons of MWP by the year 2010 making it one of the single largest components of the state's solid waste stream. This paper reports on the use of MWP as fuel source

  6. Countercurrent liquid-liquid extraction on paper

    NARCIS (Netherlands)

    Salentijn, Gert Ij; Grajewski, Maciej; Verpoorte, Elisabeth

    2017-01-01

    Proof-of-concept is shown for two-phase countercurrent flow on paper. The device consists of two paper layers, one of which has been modified with a sizing agent to be hydrophobic. The layers exhibit different wetting behavior for water and octanol. Both phases dominate wetting in one of the layers

  7. Review Papers are Important and Worth Writing

    Science.gov (United States)

    Reviews are papers that compile, summarize, critique and synthesize the available information on a topic. They are highly represented in Environmental Toxicology and Chemistry’s 100 most cited papers for a good and obvious reason. If you wish to provide citation to support your ...

  8. Vocational Assessment. Policy Paper Series: Document 6.

    Science.gov (United States)

    Stodden, Robert A., Ed.

    This collection of four policy papers on vocational assessment for the handicapped deals with personnel development, interagency coordination, current research and development, and providing individualized assessment services. Discussed in the initial paper on program improvement in vocational assessment for the handicapped are federal legislation…

  9. The Wage Gap: Briefing Paper #1.

    Science.gov (United States)

    National Committee on Pay Equity, Washington, DC.

    Women have made slow, steady progress in the labor market since 1979, but the wage gap has not narrowed significantly. This briefing paper updates a September 1987 paper based on "Male-Female Differences in Work Experience, Occupations, and Earnings: 1984" (Current Population Reports, Household Economic Studies, Series P-70, No. 10, issued in…

  10. Radioactivity in newspapers and information business papers

    International Nuclear Information System (INIS)

    Kobashi, Asaya

    1997-01-01

    The radioactivities of the naturally occurring radionuclides ( 226 Ra, 228 Ra, 228 Th and 40 K) and a fallout nuclide ( 137 Cs) in newspapers issued during 1990s in Japan and information business papers were determined by gamma-ray spectrometry to obtain information on radioactivity level of papers and the sources of radionuclides contained in papers. The concentrations of the naturally occurring radionuclides in the newspapers were low, whereas the 228 Ra and 228 Th contents of an information business paper were as high as 30 Bq kg -1 . Perhaps the thorium series nuclides contained in this information business paper was present in the kaolinite filler used in the paper. 137 Cs was detected in all the newspapers, while the radionuclide was not detected in the information business papers. The 137 Cs concentration in the newspaper ranged from 0.1 to 0.2 Bq kg -1 . Mechanical pulp was the main constituent of the newspapers, and 137 Cs in the newspapers was maybe brought with the mechanical pulp which kept a part of fallout 137 Cs contained in the material wood. The data obtained in this work may be useful to estimate radioactivity released from incinerators to the environment by burning waste paper. (author)

  11. Light Sterile Neutrinos: A White Paper

    DEFF Research Database (Denmark)

    Abazajian, K. N.; Acero, M. A.; Agarwalla, S. K.

    2012-01-01

    This white paper addresses the hypothesis of light sterile neutrinos based on recent anomalies observed in neutrino experiments and the latest astrophysical data.......This white paper addresses the hypothesis of light sterile neutrinos based on recent anomalies observed in neutrino experiments and the latest astrophysical data....

  12. Papers, Volume 1 1962-1985

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this Volume 1 of “Papers”, 20 papers published from 1962 to 1985 are presented. The papers are reproduced by using scanning techniques and retyping of equations. During this work, small modifications and corrections have been made. Unfortunately, new errors may have been introduced. This is my...

  13. Comment on two papers of chaotic synchronization

    International Nuclear Information System (INIS)

    Li Lixiang; Peng Haipeng; Wang Xiangdong; Yang Yixian

    2004-01-01

    This Letter comments on two papers of chaotic synchronization, namely [Phys. Rev. Lett. 76 (1996) 1232] and [Phys. Lett. A 321 (2004) 50]. We find that some statements in the two papers are incorrect by numerical simulations. The consequence of the incorrectness is analyzed as well

  14. Enhancing paper strength by optimizing defect configuration

    Science.gov (United States)

    J.M. Considine; W. Skye; W. Chen; D. Matthys; David W. Vahey; K. Turner; R. Rowlands

    2009-01-01

    Poor formation in paper, as denoted by large local variation of mass, tends to reduce maximum tensile strength but has not been well characterized. The effect of grammage variation on tensile strength was studied by introducing carefully placed holes in tensile specimens made of three different paper materials. Previous researchers demonstrated that the point-stress...

  15. Reading for Pleasure: The Research Paper Reconsidered.

    Science.gov (United States)

    Kotler, Janet

    1989-01-01

    Describes a research paper assignment in which students choose a controversial news event reported by six to eight newspapers and arrive at a thesis by comparing the accounts. Notes that students become truly engaged with the assignment and that engagement shows itself strongly in the intelligence and life of the papers. (RS)

  16. Photocatalytic paper using zinc oxide nanorods

    International Nuclear Information System (INIS)

    Baruah, Sunandan; Jaisai, Mayuree; Imani, Reza; Nazhad, Mousa M; Dutta, Joydeep

    2010-01-01

    Zinc oxide (ZnO) nanorods were grown on a paper support prepared from soft wood pulp. The photocatalytic activity of a sheet of paper with ZnO nanorods embedded in its porous matrix has been studied. ZnO nanorods were firmly attached to cellulose fibers and the photocatalytic paper samples were reused several times with nominal decrease in efficiency. Photodegradation of up to 93% was observed for methylene blue in the presence of paper filled with ZnO nanorods upon irradiation with visible light at 963 Wm -2 for 120 min. Under similar conditions, photodegradation of approximately 35% was observed for methyl orange. Antibacterial tests revealed that the photocatalytic paper inhibits the growth of Escherichia coli under room lighting conditions.

  17. Radiation effects on the integrity of paper

    International Nuclear Information System (INIS)

    Otero D'Almeida, Maria Luiza; Medeiros Barbosa, Patricia de Souza; Boaratti, Marcelo Fernando Guerra; Borrely, Sueli Ivone

    2009-01-01

    Books and documents attacked by fungi and insects have already been treated by radiation for disinfestations purposes. However, there is still need to investigate the influence of radiation on the cellulose paper structure. The aim of this research was to study the effects of radiation on paper properties, especially those related to strength and appearance. Paper sheets for this study were prepared in the laboratory, using bleached eucalyptus pulp as raw material. No additives were used to concentrate the attention only on the effects of irradiation on the pure cellulose matrix. The samples were irradiated at IPEN's 60 Co Gammacell irradiator with six radiation doses, from 3 to 15 kGy at the dose rate 0.817 Gy/s. The properties of paper sheets were tested after irradiation and compared with unirradiated samples according to ISO methods. No significant changes were detected in paper samples irradiated up to 15 kGy.

  18. Trends in Multi-authored Papers in Economics

    OpenAIRE

    John Hudson

    1996-01-01

    This paper looks at the growth of multiple-authored papers in eight leading economics journals. In 1950, multiple authorship was a relative rarity. By the 1990s, it had become commonplace. An empirical analysis suggests that this growth has not been even over time but appears to have been greatest in the mid-1960s and again since the mid-1970s. Possible reasons for this growth include developments in computer technology. Its implications for the economics profession are briefly discussed.

  19. Mathematical foundation of geodesy selected papers of Torben Krarup

    CERN Document Server

    Borre, K

    2006-01-01

    This volume contains selected papers by Torben Krarup, one of the most important geodesists of the 20th century. The collection includes the famous booklet "A Contribution to the Mathematical Foundation of Physical Geodesy" from 1969, the unpublished "Molodenskij letters" from 1973, the final version of "Integrated Geodesy" from 1978, "Foundation of a Theory of Elasticity for Geodetic Networks" from 1974, as well as trend-setting papers on the theory of adjustment.

  20. Abstracts and papers of the 1999 International RERTR Meeting

    International Nuclear Information System (INIS)

    1999-10-01

    The papers presented at the 22nd International RERTR Meeting dealt with the following topics: development and testing of new fuel elements (uranium-molybdenum alloys); research reactors core conversion studies (change from highly to moderately or slightly enriched uranium), including both measurements and calculations: spent fuel storage and transportation; production of 99 Mo from low enriched uranium. A number of papers were devoted to the status and future of national RERTR programs

  1. Conceptual Paper: Digital Preservation Strategies in Archival Institution

    OpenAIRE

    Ismail Adila; Bullah Affandy Habee

    2018-01-01

    In this paper, the overall overview of concept of preservation regardless if it is preservation of physical records/archives or digital records/archives is discussed. The concept of the preservation discussed includes preventive preservation, restorative preservation, and content preservation. Then the concept of digital preservation. Furthermore, this paper highlighted the strategies and methods used in implementing the preservation of digital records/archives. The issues those are involved ...

  2. FY 1990 scientific and technical reports, articles, papers, and presentations

    Science.gov (United States)

    Turner, Joyce E. (Compiler)

    1990-01-01

    Formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 90 are presented. Also included are papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from NTIS. The information may be of value to the scientific and engineering community in determining what information has been published and what is available.

  3. FY87 scientific and technical reports, articles, papers, and presentations

    Science.gov (United States)

    Turner, Joyce E. (Compiler)

    1987-01-01

    The document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY87. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, Va. 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

  4. FY 2004 Scientific and Technical Reports, Articles, Papers, and Presentations

    Science.gov (United States)

    Fowler, B. A. (Compiler)

    2006-01-01

    This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel FY 2004. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this TM maybe of value to the scientific and engineering community in determining what information has been published and what is available.

  5. FY 1998 Scientific and Technical Reports, Articles, Papers, and Presentations

    Science.gov (United States)

    Waits, J. E. Turner (Compiler)

    1999-01-01

    This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC (Marshall Space Flight Center) personnel in FY98. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

  6. Scientific and Technical Reports, Articles, Papers, and Presentations

    Science.gov (United States)

    Waits, J. E. Turner (Compiler)

    2001-01-01

    This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 2000. It also includes papers of MSFC contractors. After being announced in STAR, all the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

  7. FY 2001 Scientific and Technical Reports, Articles, Papers, and Presentations

    Science.gov (United States)

    Waits, J. E. Turner (Compiler)

    2002-01-01

    This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 2001. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

  8. FY 1999 Scientific and Technical Reports, Articles, Papers, and Presentations

    Science.gov (United States)

    Waits, J.oyce E.Turner

    2000-01-01

    This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY99. It also includes papers of MSFC contractors. All of the NASA series reports may be obtained from the NASA Center for AeroSpace Information (CASI), 7121 Standard Drive, Hanover, MD 21076-1320 The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

  9. FY 1988 scientific and technical reports, articles, papers and presentations

    Science.gov (United States)

    Turner, Joyce E. (Compiler)

    1988-01-01

    This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 88. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the NationaL Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

  10. Academic Primer Series: Key Papers About Peer Review.

    Science.gov (United States)

    Yarris, Lalena M; Gottlieb, Michael; Scott, Kevin; Sampson, Christopher; Rose, Emily; Chan, Teresa M; Ilgen, Jonathan

    2017-06-01

    Peer review, a cornerstone of academia, promotes rigor and relevance in scientific publishing. As educators are encouraged to adopt a more scholarly approach to medical education, peer review is becoming increasingly important. Junior educators both receive the reviews of their peers, and are also asked to participate as reviewers themselves. As such, it is imperative for junior clinician educators to be well-versed in the art of peer reviewing their colleagues' work. In this article, our goal was to identify and summarize key papers that may be helpful for faculty members interested in learning more about the peer-review process and how to improve their reviewing skills. The online discussions of the 2016-17 Academic Life in Emergency Medicine (ALiEM) Faculty Incubator program included a robust discussion about peer review, which highlighted a number of papers on that topic. We sought to augment this list with further suggestions by guest experts and by an open call on Twitter for other important papers. Via this process, we created a list of 24 total papers on the topic of peer review. After gathering these papers, our authorship group engaged in a consensus-building process incorporating Delphi methods to identify the papers that best described peer review, and also highlighted important tips for new reviewers. We found and reviewed 24 papers. In our results section, we present our authorship group's top five most highly rated papers on the topic of peer review. We also summarize these papers with respect to their relevance to junior faculty members and to faculty developers. We present five key papers on peer review that can be used for faculty development for novice writers and reviewers. These papers represent a mix of foundational and explanatory papers that may provide some basis from which junior faculty members might build upon as they both undergo the peer-review process and act as reviewers in turn.

  11. Paper in the Era of Digitisation

    Directory of Open Access Journals (Sweden)

    Klemen Možina

    2013-09-01

    Full Text Available EXTENDED ABSTRACT:The paper has always been and it remains to be the primary information carrier though only 0.1 % of the total information is recorded on this media. The paper production industry has a great impact on the environment which is mostly due to the use of raw materials (wood of conifers and deciduous trees, fillers (CaCO 3, additional materials (dyes, glue, binders, retentionaids, and chemicals (acids and bases. However, the greatest impact on the environmentis caused by the extensive water consumption. To produce 1 ton of paper up to 60 m3 of freshwater are necessary. The water is not the only resource needed in the production cycle. Besides, the consumption of electrical energy (approximately 10,000 MJ/t pap, waste paper (paper represents 35 % of waste, and air pollution (paper production and transport should be taken into consideration. In spite of the above mentioned environmental threats the paper still remains an important element of the everyday life and the use of modern information technology (personal computers, telefax, Internet has increased its demand and consumption. It is important that the paper is produced from natural materials which are later released into environment without significant environmental consequences. The technology of paper recycling and re-use is widely known and a must of any responsible and professional social environment. Digitisation has increased the consumption of electrical energy as a consequence of production, use and reprocessing of different devices. Unlike a written record, a digital record has no permanent value and the electromagnetic field has a negative effect on the digital records. Digital records have to be constantly updated and adjusted to the computer software and hardware. A book and its content represent a treasure and an invaluable part of the cultural heritage. To use a book it is necessary to learn the alphabet whereas to read digital records we need to be computer and

  12. Proceedings of condensed papers on alternate energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Veziroglu, T.N. (ed.)

    1979-01-01

    The conference covers the results of research and developments which have taken place during the last 2 years. It includes sessions on solar energy, ocean thermal energy, wind energy, hydro power, nuclear breeders and nuclear fusion, synthetic fuels from coal or waste, hydrogen production and uses. The volume of the Proceedings presents the papers and lectures in condensed format grouped by their subjects under 40 technical sessions. Condensed papers are presented for the 336 presentations; abstracts have previously appeared in the DOE Energy Data Base for 33 of the full-length papers.

  13. MXene-on-Paper Coplanar Microsupercapacitors

    KAUST Repository

    Kurra, Narendra

    2016-09-05

    A simple and scalable direct laser machining process to fabricate MXene-on-paper coplanar microsupercapacitors is reported. Commercially available printing paper is employed as a platform in order to coat either hydrofluoric acid-etched or clay-like 2D Ti3C2 MXene sheets, followed by laser machining to fabricate thick-film MXene coplanar electrodes over a large area. The size, morphology, and conductivity of the 2D MXene sheets are found to strongly affect the electrochemical performance due to the efficiency of the ion-electron kinetics within the layered MXene sheets. The areal performance metrics of Ti3C2 MXene-on-paper microsupercapacitors show very competitive power-energy densities, comparable to the reported state-of-the-art paper-based microsupercapacitors. Various device architectures are fabricated using the MXene-on-paper electrodes and successfully demonstrated as a micropower source for light emitting diodes. The MXene-on-paper electrodes show promise for flexible on-paper energy storage devices. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Antifungal Paper Based on a Polyborneolacrylate Coating

    Directory of Open Access Journals (Sweden)

    Jiangqi Xu

    2018-04-01

    Full Text Available Paper documents and products are very susceptible to microbial contamination and damage. Fungi are mainly responsible for those biodeterioration processes. Traditional microbicidal strategies constitute a serious health risk even when microbes are dead. Ideal methods should not be toxic to humans and should have no adverse effects on paper, but should own a broad spectrum, good chemical stability and low cost. In this work, we utilize an advanced antimicrobial strategy of surface stereochemistry by applying a coating of a shallow layer of polyborneolacrylate (PBA, resulting in the desired antifungal performance. The PBA-coated paper is challenged with the most common air-borne fungi growing on paper, Aspergillus niger and Penicillium sp. Ten percent by weight of the coating concentration or a 19-μm infiltration of PBA is sufficient to keep the paper spotless. The PBA coating also exhibits significant inhibition of spores’ germination. After PBA coating, both physicochemical properties (paper whiteness, pH, mechanical strength and inking performance display only slight changes, which are acceptable for general utilization. This PBA coating method is nontoxic, rapid and cost-effective, thus demonstrating great potential for applications in paper products.

  15. Rationalization of water consumption in paper industry

    Directory of Open Access Journals (Sweden)

    Žarković Darja

    2004-01-01

    Full Text Available The subject of this paper was to consider the possibilities of economical paper production with rationalization of water consumption. In accordance with the principles of viable development. The pulp & paper industry has had to face global market needs and strict regulation concerning the environment. The basic motive was to provide consistent and high product quality, which is competitive on the market. The pulp & paper industry is one of the largest consumers and pollutants of natural resources. In that light, the rationalization of raw material, water, energy and chemicals consumption with minimization of environmental impact is essential. The European directive on environmental protection obliges producers of pulp & paper to decrease the volume of wastewater and to increase the efficiency treatment. Pulp and paper industry in Serbia and Montenegro will also be faced with the demands for environmental protection. Numerous examples of water consumption rationalization and improvement of water quality in the pulp & paper industry could be found in different literature sources. It is necessary to increase water system closure and implement up-to-date treatment methods. The possibilities for water consumption rationalization, in a real system the paperboard mill UMKA, were examined.

  16. Paper recycling framework, the "Wheel of Fiber".

    Science.gov (United States)

    Ervasti, Ilpo; Miranda, Ruben; Kauranen, Ilkka

    2016-06-01

    At present, there is no reliable method in use that unequivocally describes paper industry material flows and makes it possible to compare geographical regions with each other. A functioning paper industry Material Flow Account (MFA) that uses uniform terminology and standard definitions for terms and structures is necessary. Many of the presently used general level MFAs, which are called frameworks in this article, stress the importance of input and output flows but do not provide a uniform picture of material recycling. Paper industry is an example of a field in which recycling plays a key role. Additionally, terms related to paper industry recycling, such as collection rate, recycling rate, and utilization rate, are not defined uniformly across regions and time. Thus, reliably comparing material recycling activity between geographical regions or calculating any regional summaries is difficult or even impossible. The objective of this study is to give a partial solution to the problem of not having a reliable method in use that unequivocally describes paper industry material flows. This is done by introducing a new material flow framework for paper industry in which the flow and stage structure supports the use of uniform definitions for terms related to paper recycling. This new framework is termed the Detailed Wheel of Fiber. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Electrochemical Detection in Stacked Paper Networks.

    Science.gov (United States)

    Liu, Xiyuan; Lillehoj, Peter B

    2015-08-01

    Paper-based electrochemical biosensors are a promising technology that enables rapid, quantitative measurements on an inexpensive platform. However, the control of liquids in paper networks is generally limited to a single sample delivery step. Here, we propose a simple method to automate the loading and delivery of liquid samples to sensing electrodes on paper networks by stacking multiple layers of paper. Using these stacked paper devices (SPDs), we demonstrate a unique strategy to fully immerse planar electrodes by aqueous liquids via capillary flow. Amperometric measurements of xanthine oxidase revealed that electrochemical sensors on four-layer SPDs generated detection signals up to 75% higher compared with those on single-layer paper devices. Furthermore, measurements could be performed with minimal user involvement and completed within 30 min. Due to its simplicity, enhanced automation, and capability for quantitative measurements, stacked paper electrochemical biosensors can be useful tools for point-of-care testing in resource-limited settings. © 2015 Society for Laboratory Automation and Screening.

  18. Mixed waste paper to ethanol fuel

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The objectives of this study were to evaluate the use of mixed waste paper for the production of ethanol fuels and to review the available conversion technologies, and assess developmental status, current and future cost of production and economics, and the market potential. This report is based on the results of literature reviews, telephone conversations, and interviews. Mixed waste paper samples from residential and commercial recycling programs and pulp mill sludge provided by Weyerhauser were analyzed to determine the potential ethanol yields. The markets for ethanol fuel and the economics of converting paper into ethanol were investigated.

  19. X-radiography using photographic papers

    International Nuclear Information System (INIS)

    Nitiyaporn, W.

    1986-01-01

    The objective of this research is to study the possibility of using photographic paper, available on the market, for x-ray radiography instead of x-ray film which is more expensive and more complicate to develop. This research concerned about (1) the method and the limitation of x-ray radiography by using 3 types of photographic paper, namely, F2, F3 and F4 distributed by the Kodak Company, as the screen with 3 different kinds of intensifying screens produced by the Phillips Company, Toshiba Company and Picker Company to increase photographic efficiency; (2) correction factor between these 3 types of photographic paper and intensifying screens; (3) the most suitable combination of photographic paper and intensifying screens used; (4) the result of using photographic paper and x-ray film in x-ray radiography regarding quality, cost and film developing. From the research, it was found that (1) the combination of intensifying screen from Picker Company and Kodak photographic paper No. F4 coating with silver bromide with a little mixture of silver iodide resulted in higher sensitivity and more contrast than other combination; (2) photographic papers had more limitation than x-ray film in the sense that it could be used with the iron test piece no thicker than 3 cm.with the x-ray energy of 220 k Vp; (3) photographic papers would give almost the same degree of contrast and sensitivity as x-ray film when used with thin test specimens. For instance the smallest wire No.12 of DIN 62 FE could be seen in the photographic paper at 220 k Vp while it could be seen in the x-ray film at 200 k Vp while it could be seen in the x-ray film at 200 k Vp. The exposure of photographic paper would be in vicinity of x-ray film when it was used with thin test specimens. Photographic paper would produce sharpness definition, density and contrast picture and also details of the picture closely to what given by x-ray film. It is concluded that if the test specimens are thin, photographic papers

  20. Responsibility for scientific misconduct in collaborative papers.

    Science.gov (United States)

    Helgesson, Gert; Eriksson, Stefan

    2017-12-08

    This paper concerns the responsibility of co-authors in cases of scientific misconduct. Arguments in research integrity guidelines and in the bioethics literature concerning authorship responsibilities are discussed. It is argued that it is unreasonable to claim that for every case where a research paper is found to be fraudulent, each author is morally responsible for all aspects of that paper, or that one particular author has such a responsibility. It is further argued that it is more constructive to specify what task responsibilities come with different roles in a project and describe what kinds of situations or events call for some kind of action, and what the appropriate actions might be.