WorldWideScience

Sample records for included multiple components

  1. Stages of Plasma Cell Neoplasms (Including Multiple Myeloma)

    Science.gov (United States)

    ... Treatment Health Professional Plasma Cell Neoplasms Treatment Research Plasma Cell Neoplasms (Including Multiple Myeloma) Treatment (PDQ®)–Patient Version General Information About Plasma Cell Neoplasms Go to Health Professional Version Key ...

  2. Multiple Spectral Components in Large-Scale Jets

    Science.gov (United States)

    Meyer, Eileen; Georganopoulos, Markos; Petropoulou, Maria; Breiding, Peter

    2018-01-01

    One of the most striking discoveries of the Chandra X-ray Observatory is the population of bright X-ray emitting jets hosted by powerful quasars. Most of these jets show hard X-ray spectra which requires a separate spectral component compared with the radio-optical synchrotron emission, which usually peaks at or before the infrared. Though the origin of this high-energy spectral component has been a matter of debate for nearly two decades, it is still not understood, with major implications for our understanding of particle acceleration in jets, as well as the total energy carried by them. Until recently the prevailing interpretation for the second component has been inverse-Compont upscattering of the CMB by a still highly relativistic jet at kpc scales. I will briefly describe the recent work calling the IC/CMB model into serious question (including X-ray variability, UV polarization, gamma-ray upper limits, and proper motions), and present new results, based on new ALMA, HST, and Chandra observations, which suggest that more than two distinct spectral components may be present in some large-scale jets, and that these multiple components appear to arise in jets across the full range in jet power, and not just in the most powerful sources. These results are very difficult to reconcile with simple models of jet emission, and I will discuss these failures and some possible directions for the future, including hadronic models.

  3. Classification of independent components of EEG into multiple artifact classes

    DEFF Research Database (Denmark)

    Frølich, Laura; Andersen, Tobias; Mørup, Morten

    2015-01-01

    In this study, we aim to automatically identify multiple artifact types in EEG. We used multinomial regression to classify independent components of EEG data, selecting from 65 spatial, spectral, and temporal features of independent components using forward selection. The classifier identified...... neural and five nonneural types of components. Between subjects within studies, high classification performances were obtained. Between studies, however, classification was more difficult. For neural versus nonneural classifications, performance was on par with previous results obtained by others. We...

  4. 76 FR 76436 - Certain Communication Equipment, Components Thereof, and Products Containing the Same, Including...

    Science.gov (United States)

    2011-12-07

    ..., Components Thereof, and Products Containing the Same, Including Power Over Ethernet Telephones, Switches... products containing the same, including power over ethernet telephones, switches, wireless access points... certain communication equipment, components thereof, and products containing the same, including power...

  5. 77 FR 36291 - Certain Communication Equipment, Components Thereof, and Products Containing the Same, Including...

    Science.gov (United States)

    2012-06-18

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-817] Certain Communication Equipment, Components Thereof, and Products Containing the Same, Including Power Over Ethernet Telephones, Switches... communication equipment, components thereof, and products containing the same, including power over ethernet...

  6. Multiple outflows, spatial components, and nonlinearities in age theory

    Science.gov (United States)

    Calabrese, Salvatore; Porporato, Amilcare

    2017-01-01

    Water age has become an important variable for the characterization of hydrologic systems. The goal of this paper is to analyze the role of multiple outflows, spatial components, and nonlinearities in age theory. We first extend the theory to linear systems with multiple outflows, including the relationship between age distribution at death and survival time distribution at birth. We further show that for each outflow there is a survival time distribution at birth, which normalized corresponds to the impulse-response function for the specific outflow. We also analyze how the impulse-response function affects both the amplitude gain and time delay of the outflow and the long-term average partitioning. With regard to linear spatially extended systems, we link the impulse-response function to the Green's function. This allows us to easily compute the loss function and the age distribution for the system. Finally, we focus on nonlinear systems to analyze the effects of storage-dependent and age distribution-dependent loss functions. By considering the Burgers' equation, we show how the relationships between spatial dynamics and the age distribution are complicated by nonlinearities.

  7. 77 FR 6463 - Revisions to Labeling Requirements for Blood and Blood Components, Including Source Plasma...

    Science.gov (United States)

    2012-02-08

    ... Blood Components, Including Source Plasma; Correction AGENCY: Food and Drug Administration, HHS. ACTION..., Including Source Plasma,'' which provided incorrect publication information regarding a 60-day notice that...

  8. Multiple isoforms of the human pentraxin serum amyloid P component

    DEFF Research Database (Denmark)

    Sørensen, Inge Juul; Andersen, Ove; Nielsen, EH

    1995-01-01

    Human serum amyloid P component (SAP) isolated from 20 healthy individuals was analyzed by anion exchange chromatography and isoelectric focusing (IEF) in order to investigate the existence of multiple forms of SAP and interindividual structural differences. Anion exchange chromatography showed one...

  9. Multiple isoforms of the human pentraxin serum amyloid P component

    DEFF Research Database (Denmark)

    Sørensen, Inge Juul; Andersen, Ove; Nielsen, EH

    1995-01-01

    Human serum amyloid P component (SAP) isolated from 20 healthy individuals was analyzed by anion exchange chromatography and isoelectric focusing (IEF) in order to investigate the existence of multiple forms of SAP and interindividual structural differences. Anion exchange chromatography showed one...... the number of bands in IEF to two indicating the existence of two types of polypeptide chains....

  10. Multiple imaging procedures including MRI for the bladder cancer

    International Nuclear Information System (INIS)

    Mikata, Noriharu; Suzuki, Makoto; Takeuchi, Takumi; Kunisawa, Yositaka; Fukutani, Keiko; Kawabe, Kazuki

    1986-01-01

    Endoscopic photography, double contrast cystography, transurethral echography, X-ray CT scan, and MRI (magnetic resonance imaging) were utilized for the staging diagnosis of the four patients with carcinoma of the bladder. In the first case, a 70-year-old man, since all of the five imaging procedures suggested a superficial and pedunculated tumor, his bladder cancer was considered T1. The classification of stage T3 carcinoma was made for the second 86-year-old male. Because all of his imaging examinations showed a tumor infiltrating deep muscle and penetrating the bladder wall. The third case was a 36-year-old male. His clinical stage was diagnosed as T2 or T3a by cystophotography, double contrast cystogram, ultrasonography, and X-ray CT scan. However, MRI showed only thickened bladder wall and the infiltrating tumor could not be distinguished from the hypertrophic wall. The last patient, a 85-year-old female, had a smaller Ta cancer. Her double contrast cystography revealed the small tumor at the lateral bladder wall. But, the tumor could not be detected by transaxial, sagittal and coronal scans. Multiple imaging procedures combining MRI and staging diagnosis of the bladder carcinoma were discussed. (author)

  11. Solution of neutron slowing down equation including multiple inelastic scattering

    International Nuclear Information System (INIS)

    El-Wakil, S.A.; Saad, A.E.

    1977-01-01

    The present work is devoted the presentation of an analytical method for the calculation of elastically and inelastically slowed down neutrons in an infinite non absorbing homogeneous medium. On the basis of the Central limit theory (CLT) and the integral transform technique the slowing down equation including inelastic scattering in terms of the Green function of elastic scattering is solved. The Green function is decomposed according to the number of collisions. A formula for the flux at any lethargy O (u) after any number of collisions is derived. An equation for the asymptotic flux is also obtained

  12. Modeling microstructural evolution of multiple texture components during recrystallization

    DEFF Research Database (Denmark)

    Vandermeer, R.A.; Juul Jensen, D.

    1994-01-01

    Models were formulated in an effort to characterize recrystallization in materials with multiple texture components. The models are based on a microstructural path methodology (MPM). Experimentally the microstructural evolution of conmmercial aluminum during recrystallization was characterized...... using stereological point and lineal measurements of microstructural properties in combination with EBSP analysis for orientation determinations. The potential of the models to describe the observed recrystallization behavior of heavily cold-rolled commercial aluminum was demonstrated. A successful MPM...

  13. High gliding fluid power generation system with fluid component separation and multiple condensers

    Science.gov (United States)

    Mahmoud, Ahmad M; Lee, Jaeseon; Radcliff, Thomas D

    2014-10-14

    An example power generation system includes a vapor generator, a turbine, a separator and a pump. In the separator, the multiple components of the working fluid are separated from each other and sent to separate condensers. Each of the separate condensers is configured for condensing a single component of the working fluid. Once each of the components condense back into a liquid form they are recombined and exhausted to a pump that in turn drives the working fluid back to the vapor generator.

  14. 78 FR 34132 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-06-06

    ... INTERNATIONAL TRADE COMMISSION [Docket No 2958] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Correction to Notice of Receipt of Complaint; Solicitation... of complaint entitled Certain Portable Electronic Communications Devices, Including Mobile Phones and...

  15. 77 FR 53234 - Certain Communication Equipment, Components Thereof, and Products Containing the Same, Including...

    Science.gov (United States)

    2012-08-31

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-817] Certain Communication Equipment, Components Thereof, and Products Containing the Same, Including Power Over Ethernet Telephones, Switches... products containing the same, including power over ethernet telephones, switches, wireless access points...

  16. Multiple isoforms of the human pentraxin serum amyloid P component

    DEFF Research Database (Denmark)

    Sørensen, Inge Juul; Andersen, Ove; Nielsen, EH

    1995-01-01

    Human serum amyloid P component (SAP) isolated from 20 healthy individuals was analyzed by anion exchange chromatography and isoelectric focusing (IEF) in order to investigate the existence of multiple forms of SAP and interindividual structural differences. Anion exchange chromatography showed one...... major and several minor subpopulations of SAP. IEF of all SAP isolates showed a previously unreported degree of heterogeneity with six isoelectric forms (pKi range 5.5-6.1) and with minor interindividual differences in respect of isoelectric points. Total enzymatic deglycosylation of SAP reduced...

  17. Turbomachine combustor nozzle including a monolithic nozzle component and method of forming the same

    Science.gov (United States)

    Stoia, Lucas John; Melton, Patrick Benedict; Johnson, Thomas Edward; Stevenson, Christian Xavier; Vanselow, John Drake; Westmoreland, James Harold

    2016-02-23

    A turbomachine combustor nozzle includes a monolithic nozzle component having a plate element and a plurality of nozzle elements. Each of the plurality of nozzle elements includes a first end extending from the plate element to a second end. The plate element and plurality of nozzle elements are formed as a unitary component. A plate member is joined with the nozzle component. The plate member includes an outer edge that defines first and second surfaces and a plurality of openings extending between the first and second surfaces. The plurality of openings are configured and disposed to register with and receive the second end of corresponding ones of the plurality of nozzle elements.

  18. 78 FR 56737 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-09-13

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-885] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Commission Determination Not To Review an Initial Determination Granting Complainant's Motion To Amend the Complaint and Notice of Investigation...

  19. 77 FR 45375 - Certain Liquid Crystal Display Devices, Including Monitors, Televisions, Modules, and Components...

    Science.gov (United States)

    2012-07-31

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Liquid Crystal Display Devices, Including Monitors, Televisions, Modules, and Components Thereof; Commission Determination Not To Review an Initial Determination Terminating the Investigation as...

  20. Selection Component Analysis of Natural Polymorphisms using Population Samples Including Mother-Offspring Combinations, II

    DEFF Research Database (Denmark)

    Jarmer, Hanne Østergaard; Christiansen, Freddy Bugge

    1981-01-01

    Population samples including mother-offspring combinations provide information on the selection components: zygotic selection, sexual selection, gametic seletion and fecundity selection, on the mating pattern, and on the deviation from linkage equilibrium among the loci studied. The theory...

  1. 78 FR 49764 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-08-15

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-885] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Commission Determination Not To Review n Initial Determination Granting Google, Inc.'s Unopposed Motion To Intervene AGENCY: U.S. International...

  2. 78 FR 72712 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-12-03

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-885] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Commission Determination Not To Review an Initial Determination Granting Google, Inc.'s Motion To Intervene AGENCY: U.S. International Trade...

  3. A review of the reliability analysis of LPRS including the components repairs

    International Nuclear Information System (INIS)

    Oliveira, L.F.S. de; Fleming, P.V.; Frutuoso e Melo, P.F.F.; Tayt-Sohn, L.C.

    1983-01-01

    The reliability analysis of low pressure recirculation system in its long-term recicurlation phase before 24hs is presented. The possibility of repairing the components out of the containment is included. A general revision of analysis of the short-term recirculation phase is done. (author) [pt

  4. 78 FR 63492 - Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof...

    Science.gov (United States)

    2013-10-24

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-847] Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof; Notice of Request for Statements on the Public Interest AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is...

  5. Measuring multiple residual-stress components using the contour method and multiple cuts

    Energy Technology Data Exchange (ETDEWEB)

    Prime, Michael B [Los Alamos National Laboratory; Swenson, Hunter [Los Alamos National Laboratory; Pagliaro, Pierluigi [U. PALERMO; Zuccarello, Bernardo [U. PALERMO

    2009-01-01

    The conventional contour method determines one component of stress over the cross section of a part. The part is cut into two, the contour of the exposed surface is measured, and Bueckner's superposition principle is analytically applied to calculate stresses. In this paper, the contour method is extended to the measurement of multiple stress components by making multiple cuts with subsequent applications of superposition. The theory and limitations are described. The theory is experimentally tested on a 316L stainless steel disk with residual stresses induced by plastically indenting the central portion of the disk. The stress results are validated against independent measurements using neutron diffraction. The theory has implications beyond just multiple cuts. The contour method measurements and calculations for the first cut reveal how the residual stresses have changed throughout the part. Subsequent measurements of partially relaxed stresses by other techniques, such as laboratory x-rays, hole drilling, or neutron or synchrotron diffraction, can be superimposed back to the original state of the body.

  6. Multiple-input multiple-output visible light communication system based on disorder dispersion components

    Science.gov (United States)

    Yang, Tao; Zhang, Qi; Hao, Yue; Zhou, Xin-hui; Yi, Ming-dong; Wei, Wei; Huang, Wei; Li, Xing-ao

    2017-10-01

    A multiple-input multiple-output visible light communication (VLC) system based on disorder dispersion components is presented. Instead of monochromatic sources and large size photodetectors used in the traditional VLC systems, broadband sources with different spectra act as the transmitters and a compact imaging chip sensor accompanied by a disorder dispersion component and a calculating component serve as the receivers in the proposed system. This system has the merits of small size, more channels, simple structure, easy integration, and low cost. Simultaneously, the broadband sources are suitable to act as illumination sources for their white color. A regularized procedure is designed to solve a matrix equation for decoding the signals at the receivers. A proof-of-concept experiment using on-off keying modulation has been done to prove the feasibility of the design. The experimental results show that the signals decoded by the receivers fit well with those generated from the transmitters, but the bit error ratio is increased with the number of the signal channels. The experimental results can be further improved using a high-speed charge-coupled device, decreasing noises, and increasing the distance between the transmitters and the receivers.

  7. A curved multi-component aerosol hygroscopicity model framework: 2 Including organics

    Science.gov (United States)

    Topping, D. O.; McFiggans, G. B.; Coe, H.

    2004-12-01

    This paper describes the inclusion of organic particulate material within the Aerosol Diameter Dependent Equilibrium Model (ADDEM) framework described in the companion paper applied to inorganic aerosol components. The performance of ADDEM is analysed in terms of its capability to reproduce the behaviour of various organic and mixed inorganic/organic systems using recently published bulk data. Within the modelling architecture already described two separate thermodynamic models are coupled in an additive approach and combined with a method for solving the Köhler equation in order to develop a tool for predicting the water content associated with an aerosol of known inorganic/organic composition and dry size. For development of the organic module, the widely used group contribution method UNIFAC is employed to explicitly deal with the non-ideality in solution. The UNIFAC predictions for components of atmospheric importance were improved considerably by using revised interaction parameters derived from electro-dynamic balance studies. Using such parameters, the model was found to adequately describe mixed systems including 5-6 dicarboxylic acids, down to low relative humidity conditions. The additive approach for modelling mixed inorganic/organic systems worked well for a variety of mixtures. As expected, deviations between predicted and measured data increase with increasing concentration. Available surface tension models, used in evaluating the Kelvin term, were found to reproduce measured data with varying success. Deviations from experimental data increased with increased organic compound complexity. For components only slightly soluble in water, significant deviations from measured surface tension depression behaviour were predicted with both model formalisms tested. A Sensitivity analysis showed that such variation is likely to lead to predicted growth factors within the measurement uncertainty for growth factor taken in the sub-saturated regime. Greater

  8. A curved multi-component aerosol hygroscopicity model framework: Part 2 – Including organic compounds

    Directory of Open Access Journals (Sweden)

    D. O. Topping

    2005-01-01

    Full Text Available This paper describes the inclusion of organic particulate material within the Aerosol Diameter Dependent Equilibrium Model (ADDEM framework described in the companion paper applied to inorganic aerosol components. The performance of ADDEM is analysed in terms of its capability to reproduce the behaviour of various organic and mixed inorganic/organic systems using recently published bulk data. Within the modelling architecture already described two separate thermodynamic models are coupled in an additive approach and combined with a method for solving the Kohler equation in order to develop a tool for predicting the water content associated with an aerosol of known inorganic/organic composition and dry size. For development of the organic module, the widely used group contribution method UNIFAC is employed to explicitly deal with the non-ideality in solution. The UNIFAC predictions for components of atmospheric importance were improved considerably by using revised interaction parameters derived from electro-dynamic balance studies. Using such parameters, the model was found to adequately describe mixed systems including 5–6 dicarboxylic acids, down to low relative humidity conditions. By comparison with electrodynamic balance data, it was also found that the model was capable of capturing the behaviour of aqueous aerosols containing Suwannee River Fulvic acid, a structure previously used to represent the functionality of complex oxidised macromolecules often found in atmospheric aerosols. The additive approach for modelling mixed inorganic/organic systems worked well for a variety of mixtures. As expected, deviations between model predictions and measurements increase with increasing concentration. Available surface tension models, used in evaluating the Kelvin term, were found to reproduce measured data with varying success. Deviations from experimental data increased with increased organic compound complexity. For components only slightly

  9. A curved multi-component aerosol hygroscopicity model framework: Part 2 Including organic compounds

    Science.gov (United States)

    Topping, D. O.; McFiggans, G. B.; Coe, H.

    2005-05-01

    This paper describes the inclusion of organic particulate material within the Aerosol Diameter Dependent Equilibrium Model (ADDEM) framework described in the companion paper applied to inorganic aerosol components. The performance of ADDEM is analysed in terms of its capability to reproduce the behaviour of various organic and mixed inorganic/organic systems using recently published bulk data. Within the modelling architecture already described two separate thermodynamic models are coupled in an additive approach and combined with a method for solving the Kohler equation in order to develop a tool for predicting the water content associated with an aerosol of known inorganic/organic composition and dry size. For development of the organic module, the widely used group contribution method UNIFAC is employed to explicitly deal with the non-ideality in solution. The UNIFAC predictions for components of atmospheric importance were improved considerably by using revised interaction parameters derived from electro-dynamic balance studies. Using such parameters, the model was found to adequately describe mixed systems including 5-6 dicarboxylic acids, down to low relative humidity conditions. By comparison with electrodynamic balance data, it was also found that the model was capable of capturing the behaviour of aqueous aerosols containing Suwannee River Fulvic acid, a structure previously used to represent the functionality of complex oxidised macromolecules often found in atmospheric aerosols. The additive approach for modelling mixed inorganic/organic systems worked well for a variety of mixtures. As expected, deviations between model predictions and measurements increase with increasing concentration. Available surface tension models, used in evaluating the Kelvin term, were found to reproduce measured data with varying success. Deviations from experimental data increased with increased organic compound complexity. For components only slightly soluble in water

  10. TOUGH2 simulations of the TEVES Project including the behavior of a single-component NAPL

    Energy Technology Data Exchange (ETDEWEB)

    Webb, S.W. [Sandia National Labs., Albuquerque, NM (United States). Geohydrology Dept.

    1996-05-01

    The TEVES (Thermal Enhanced Vapor Extraction System) Project is a demonstration of a process designed to extract solvents and chemicals contained in the Chemical Waste Landfill at Sandia National Laboratories. In this process, the ground is electrically heated, and borehole(s) within the heated zone are maintained at a vacuum to draw air and evaporated contaminants into the borehole and a subsequent treatment facility. TOUGH2 simulations have been performed to evaluate the fluid flow and heat transfer behavior of the system. The TOUGH2 version used in this study includes air, water, and a single-component non-aqueous phase liquid (NAPL). In the present simulations, an initial o-xylene inventory is assumed in the heated zone for illustration purposes. Variation in borehole (vapor extraction) vacuum, borehole location, and soil permeability were investigated. Simulations indicate that the temperatures in the soil are relatively insensitive to the magnitude of the borehole vacuum or the borehole locations. In contrast, however, the NAPL and liquid water saturation distributions are sensitive to these borehole parameters. As the borehole vacuum and air flow rate through the soil decrease, the possibility of contaminant (NAPL) migration from the heated zone into the surrounding unheated soil increases. The borehole location can also affect the likelihood of contaminant movement into the unheated soil.

  11. Functional Components of Cognitive Impairment in Multiple Sclerosis: A Cross-Sectional Investigation.

    Science.gov (United States)

    Matias-Guiu, Jordi A; Cortés-Martínez, Ana; Valles-Salgado, María; Oreja-Guevara, Celia; Pytel, Vanesa; Montero, Paloma; Moreno-Ramos, Teresa; Matias-Guiu, Jorge

    2017-01-01

    Cognitive impairment is frequent and disabling in multiple sclerosis (MS). Changes in information processing speed constitute the most important cognitive deficit in MS. However, given the clinical and topographical variability of the disease, cognitive impairment may vary greatly and appear in other forms in addition to slower information processing speed. Our aim was to determine the frequency of cognitive impairment, the principal cognitive domains, and components involved in MS and to identify factors associated with presence of cognitive impairment in these patients in a large series of patients. Cross-sectional study of 311 patients with MS [236 with relapsing-remitting MS (RRMS), 52 with secondary progressive MS (SPMS), and 23 with primary progressive MS (PPMS)]. Patients' cognitive function was assessed with a comprehensive neuropsychological assessment protocol. Patients displaying deficits in 2 or more cognitive domains were considered to have cognitive impairment associated with MS. We conducted a principal component analysis to detect different cognitive patterns by identifying clusters of tests highly correlated to one another. Cognitive impairment was detected in 41.5% of the sample, and it was more frequent in patients with SPMS and PPMS ( P  = 0.002). Expanded Disability Status Scale scores and education were independent predictors of cognitive impairment. Principal component analysis identified seven clusters: attention and basic executive function (including information processing speed), planning and high-level executive function, verbal memory and language, executive and visuospatial performance time, fatigue-depression, visuospatial function, and basic attention and verbal/visual working memory. Mean scoring of components 2 (high-order executive functioning) and 3 (verbal memory-language) was higher in patients with RRMS than in those with PPMS (component 2) and SPMS (component 3). MS is linked to multiple cognitive profiles and

  12. Functional Components of Cognitive Impairment in Multiple Sclerosis: A Cross-Sectional Investigation

    Directory of Open Access Journals (Sweden)

    Jordi A. Matias-Guiu

    2017-11-01

    Full Text Available BackgroundCognitive impairment is frequent and disabling in multiple sclerosis (MS. Changes in information processing speed constitute the most important cognitive deficit in MS. However, given the clinical and topographical variability of the disease, cognitive impairment may vary greatly and appear in other forms in addition to slower information processing speed. Our aim was to determine the frequency of cognitive impairment, the principal cognitive domains, and components involved in MS and to identify factors associated with presence of cognitive impairment in these patients in a large series of patients.MethodsCross-sectional study of 311 patients with MS [236 with relapsing-remitting MS (RRMS, 52 with secondary progressive MS (SPMS, and 23 with primary progressive MS (PPMS]. Patients’ cognitive function was assessed with a comprehensive neuropsychological assessment protocol. Patients displaying deficits in 2 or more cognitive domains were considered to have cognitive impairment associated with MS. We conducted a principal component analysis to detect different cognitive patterns by identifying clusters of tests highly correlated to one another.ResultsCognitive impairment was detected in 41.5% of the sample, and it was more frequent in patients with SPMS and PPMS (P = 0.002. Expanded Disability Status Scale scores and education were independent predictors of cognitive impairment. Principal component analysis identified seven clusters: attention and basic executive function (including information processing speed, planning and high-level executive function, verbal memory and language, executive and visuospatial performance time, fatigue-depression, visuospatial function, and basic attention and verbal/visual working memory. Mean scoring of components 2 (high-order executive functioning and 3 (verbal memory-language was higher in patients with RRMS than in those with PPMS (component 2 and SPMS (component 3.ConclusionMS is linked to

  13. Humans' Relationship to Flowers as an Example of the Multiple Components of Embodied Aesthetics.

    Science.gov (United States)

    Huss, Ephrat; Bar Yosef, Kfir; Zaccai, Michele

    2018-03-01

    This paper phenomenologically and qualitatively explores the relationship between humans and flowers as a relationship that throws light on the synergetic dynamics of embodied aesthetics. Its methods include qualitative description and thematic analyses of preferred flower types, as well as concept maps of the general term 'flower' by 120 students in Israel. The results revealed the interactive perceptual-compositional elements, as well as embodied, relational, and socially embedded elements of the aesthetic pleasure associated with flowers. Implications of this case study are generalized to understand the multiple and interactive components of embodied aesthetic experiences as a deep source of pleasure through interactive stimulation by and connection to the natural world.

  14. Multiple corrosion protection systems for reinforced concrete bridge components.

    Science.gov (United States)

    2007-07-01

    Eleven systems combining epoxy-coated reinforcement with another corrosion protection system are evaluated using : the rapid macrocell, Southern Exposure, cracked beam, and linear polarization resistance tests. The systems include : bars that are pre...

  15. 76 FR 29797 - International Automotive Components, North America, Including On-Site Leased Workers From At-Work...

    Science.gov (United States)

    2011-05-23

    ... Employment and Training Administration International Automotive Components, North America, Including On- Site Leased Workers From At-Work Personnel and CJR Solutions, d/b/a Harvard Resources Solutions, Lebanon, VA..., applicable to workers of International Automotive Components, North America, including on-site leased workers...

  16. Voltage-Mode All-Pass Filters Including Minimum Component Count Circuits

    Directory of Open Access Journals (Sweden)

    Sudhanshu Maheshwari

    2007-01-01

    Full Text Available This paper presents two new first-order voltage-mode all-pass filters using a single-current differencing buffered amplifier and four passive components. Each circuit is compatible to a current-controlled current differencing buffered amplifier with only two passive elements, thus resulting in two more circuits, which employ a capacitor, a resistor, and an active element, thus using a minimum of active and passive component counts. The proposed circuits possess low output impedance, and hence can be easily cascaded for voltage-mode systems. PSPICE simulation results are given to confirm the theory.

  17. Connected Classroom Technology Facilitates Multiple Components of Formative Assessment Practice

    Science.gov (United States)

    Shirley, Melissa L.; Irving, Karen E.

    2015-02-01

    Formative assessment has been demonstrated to result in increased student achievement across a variety of educational contexts. When using formative assessment strategies, teachers engage students in instructional tasks that allow the teacher to uncover levels of student understanding so that the teacher may change instruction accordingly. Tools that support the implementation of formative assessment strategies are therefore likely to enhance student achievement. Connected classroom technologies (CCTs) include a family of devices that show promise in facilitating formative assessment. By promoting the use of interactive student tasks and providing both teachers and students with rapid and accurate data on student learning, CCT can provide teachers with necessary evidence for making instructional decisions about subsequent lessons. In this study, the experiences of four middle and high school science teachers in their first year of implementing the TI-Navigator™ system, a specific type of CCT, are used to characterize the ways in which CCT supports the goals of effective formative assessment. We present excerpts of participant interviews to demonstrate the alignment of CCT with several main phases of the formative assessment process. CCT was found to support implementation of a variety of instructional tasks that generate evidence of student learning for the teacher. The rapid aggregation and display of student learning evidence provided teachers with robust data on which to base subsequent instructional decisions.

  18. Pancreatic-type Acinar Cell Carcinoma of the Stomach Included in Multiple Primary Carcinomas.

    Science.gov (United States)

    Yonenaga, Yoshikuni; Kurosawa, Manabu; Mise, Masahiro; Yamagishi, Miki; Higashide, Shunichi

    2016-06-01

    Pancreatic-type acinar cell carcinoma (ACC) in the stomach is extraordinarily rare. We pathologically examined two cases with multiple primary carcinomas, including gastric tumors. Gastric cancer specimens were examined by immunostaining and electron microscopy. Both cases had cancer cells with acinar patterns, resembling pancreatic ACC. The cancer cells in the first case were positive for exocrine markers, including chymotrypsin, lipase and alpha-1 antichymotrypsin (ACT), as well as neuroendocrine markers, including chromogranin A and synaptophysin. The cancer cells in the second case were positive for chymotrypsin and alpha-1 ACT, while being slightly positive for chromogranin A and synaptophysin. Ultrastructurally, cancer cells contained zymogen granules in both cases. The final diagnosis was pancreatic mixed acinar-neuroendocrine carcinoma and pure pancreatic ACC, respectively. We confirmed two cases with gastric pancreatic-type ACC included in multiple primary carcinomas. This type of double cancer has not been reported previously. Copyright© 2016 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  19. Induced Systemic Tolerance to Multiple Stresses Including Biotic and Abiotic Factors by Rhizobacteria

    Directory of Open Access Journals (Sweden)

    Sung-Je Yoo

    2017-06-01

    Full Text Available Recently, global warming and drastic climate change are the greatest threat to the world. The climate change can affect plant productivity by reducing plant adaptation to diverse environments including frequent high temperature; worsen drought condition and increased pathogen transmission and infection. Plants have to survive in this condition with a variety of biotic (pathogen/pest attack and abiotic stress (salt, high/low temperature, drought. Plants can interact with beneficial microbes including plant growth-promoting rhizobacteria, which help plant mitigate biotic and abiotic stress. This overview presents that rhizobacteria plays an important role in induced systemic resistance (ISR to biotic stress or induced systemic tolerance (IST to abiotic stress condition; bacterial determinants related to ISR and/or IST. In addition, we describe effects of rhizobacteria on defense/tolerance related signal pathway in plants. We also review recent information including plant resistance or tolerance against multiple stresses (bioticabiotic. We desire that this review contribute to expand understanding and knowledge on the microbial application in a constantly varying agroecosystem, and suggest beneficial microbes as one of alternative environment-friendly application to alleviate multiple stresses.

  20. The Vertebrate GLFG Nucleoporin, Nup98, Is an Essential Component of Multiple RNA Export Pathways

    Science.gov (United States)

    Powers, Maureen A.; Forbes, Douglass J.; Dahlberg, James E.; Lund, Elsebet

    1997-01-01

    The 97-kD O-linked glycoprotein, Nup98, is a component of the Xenopus laevis nuclear pore complex and the only vertebrate GLFG nucleoporin identified (Powers, M.A., C. Macauley, F. Masiarz, and D.J. Forbes. 1995. J. Cell Biol. 128:721–736). We have investigated possible roles of xNup98 in the nucleocytoplasmic transport of proteins and RNAs by analyzing the consequences of injecting monospecific polyclonal antibodies to xNup98 into X. laevis oocytes. We show here that nuclear injection of anti-xNup98 inhibited the export of multiple classes of RNAs, including snRNAs, 5S RNA, large ribosomal RNAs, and mRNA. In contrast, the export of tRNA was unaffected. Injection of antixNup98 into the oocyte cytoplasm had no effect on export of any of the RNAs. Significantly, nuclear injection of anti-xNup98 antibodies did not inhibit import of either karyophilic proteins or snRNPs. This latter result is in agreement with our previous finding that Nup98 is not an essential element of the protein import pathway. Thus, Nup98 plays a role specifically in RNA export from the nucleus, and it appears to be an essential component of multiple RNA export pathways. PMID:9015297

  1. 15 CFR 921.33 - Boundary changes, amendments to the management plan, and addition of multiple-site components.

    Science.gov (United States)

    2010-01-01

    ... management plan, and addition of multiple-site components. (a) Changes in the boundary of a Reserve and major changes to the final management plan, including state laws or regulations promulgated specifically for the... management plan change. Changes in the boundary of a Reserve involving the acquisition of properties not...

  2. A Novel Algorithm for Efficient Downlink Packet Scheduling for Multiple-Component-Carrier Cellular Systems

    Directory of Open Access Journals (Sweden)

    Yao-Liang Chung

    2016-11-01

    Full Text Available The simultaneous aggregation of multiple component carriers (CCs for use by a base station constitutes one of the more promising strategies for providing substantially enhanced bandwidths for packet transmissions in 4th and 5th generation cellular systems. To the best of our knowledge, however, few previous studies have undertaken a thorough investigation of various performance aspects of the use of a simple yet effective packet scheduling algorithm in which multiple CCs are aggregated for transmission in such systems. Consequently, the present study presents an efficient packet scheduling algorithm designed on the basis of the proportional fair criterion for use in multiple-CC systems for downlink transmission. The proposed algorithm includes a focus on providing simultaneous transmission support for both real-time (RT and non-RT traffic. This algorithm can, when applied with sufficiently efficient designs, provide adequate utilization of spectrum resources for the purposes of transmissions, while also improving energy efficiency to some extent. According to simulation results, the performance of the proposed algorithm in terms of system throughput, mean delay, and fairness constitute substantial improvements over those of an algorithm in which the CCs are used independently instead of being aggregated.

  3. 77 FR 34063 - Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof...

    Science.gov (United States)

    2012-06-08

    ... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-847] Certain Electronic Devices, Including Mobile.... International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that a complaint was filed with the U.S. International Trade Commission on May 2, 2012, under section 337 of the Tariff Act of 1930...

  4. 77 FR 27078 - Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof...

    Science.gov (United States)

    2012-05-08

    ... INTERNATIONAL TRADE COMMISSION [Docket No. 2896] Certain Electronic Devices, Including Mobile... Comments Relating to the Public Interest AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that the U.S. International Trade Commission has received a complaint...

  5. The Research of Multiple Attenuation Based on Feedback Iteration and Independent Component Analysis

    Science.gov (United States)

    Xu, X.; Tong, S.; Wang, L.

    2017-12-01

    How to solve the problem of multiple suppression is a difficult problem in seismic data processing. The traditional technology for multiple attenuation is based on the principle of the minimum output energy of the seismic signal, this criterion is based on the second order statistics, and it can't achieve the multiple attenuation when the primaries and multiples are non-orthogonal. In order to solve the above problems, we combine the feedback iteration method based on the wave equation and the improved independent component analysis (ICA) based on high order statistics to suppress the multiple waves. We first use iterative feedback method to predict the free surface multiples of each order. Then, in order to predict multiples from real multiple in amplitude and phase, we design an expanded pseudo multi-channel matching filtering method to get a more accurate matching multiple result. Finally, we present the improved fast ICA algorithm which is based on the maximum non-Gauss criterion of output signal to the matching multiples and get better separation results of the primaries and the multiples. The advantage of our method is that we don't need any priori information to the prediction of the multiples, and can have a better separation result. The method has been applied to several synthetic data generated by finite-difference model technique and the Sigsbee2B model multiple data, the primaries and multiples are non-orthogonal in these models. The experiments show that after three to four iterations, we can get the perfect multiple results. Using our matching method and Fast ICA adaptive multiple subtraction, we can not only effectively preserve the effective wave energy in seismic records, but also can effectively suppress the free surface multiples, especially the multiples related to the middle and deep areas.

  6. System and method for detecting components of a mixture including a valving scheme for competition assays

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Chung-Yan; Piccini, Matthew E.; Singh, Anup K.

    2017-07-11

    Examples are described including measurement systems for conducting competition assays. A first chamber of an assay device may be loaded with a sample containing a target antigen. The target antigen in the sample may be allowed to bind to antibody-coated beads in the first chamber. A control layer separating the first chamber from a second chamber may then be opened to allow a labeling agent loaded in a first portion of the second chamber to bind to any unoccupied sites on the antibodies. A centrifugal force may then be applied to transport the beads through a density media to a detection region for measurement by a detection unit.

  7. System and method for detecting components of a mixture including a valving scheme for competition assays

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Chung-Yan; Piccini, Matthew E.; Singh, Anup K.

    2017-09-19

    Examples are described including measurement systems for conducting competition assays. A first chamber of an assay device may be loaded with a sample containing a target antigen. The target antigen in the sample may be allowed to bind to antibody-coated beads in the first chamber. A control layer separating the first chamber from a second chamber may then be opened to allow a labeling agent loaded in a first portion of the second chamber to bind to any unoccupied sites on the antibodies. A centrifugal force may then be applied to transport the beads through a density media to a detection region for measurement by a detection unit.

  8. Effects of chlorpromazine on appetitive and aversive components of a multiple schedule.

    Science.gov (United States)

    WALLER, M B; WALLER, P F

    1962-04-01

    A multiple schedule having both an appetitive and an avoidance component was maintained in two dogs to create a complex behavioral base line for observing the effects of chlorpromazine. Both soluble and "Spansule" chlorpromazine generated similar functions relating drug dose to measures of behavioral output. Although the dose ranges and the drugging procedures differed markedly for the different preparations of CPZ, the functions generated were comparable. There was no evidence that chlorpromazine had a differential depressing effect as a function of type of reinforcement. At low doses, rates of responding on the food-reinforced components increased slightly, whereas rates on the avoidance components remained relatively unchanged. At higher doses, both components showed an approximately equal depression of responding. These results are discussed with reference to some of the logical and experimental difficulties inherent in making comparisons across components of a multiple schedule and across schedules in general.

  9. Pauli Exclusion Principle and the Law of Included Multiple-Middle

    Directory of Open Access Journals (Sweden)

    Fu Yuhua

    2014-12-01

    Full Text Available It has been found that bosons are not subject to the Pauli Exclusion Principle. This paper argues that in some cases the exclusion principle is also invalid for fermions. According to the Law of Included MultipleMiddle and the like, the 4 neutralities between Pauli Exclusion Principle's validity and invalidity are as follows: first, according to Neutrosophy, any proposition has three situations of truth, falsehood and indeterminacy respectively; second, some scholars have pointed out that the exclusion principle may be broken in highenergy state; third, due to the existance of man created law (man-made law, the broken exclusion principle and the man-made (instantaneous magnetic monopole can be artificially created; fourth, the exclusion principle is not compatible with law of conservation of energy, and in physics the principles that are not compatible with law of conservation of energy will be invalid in some cases,

  10. The Multiple-component Binary Hyad, vA 351 - a Progress Report

    Science.gov (United States)

    Benedict, George Fritz; Franz, Otto G.; Wasserman, Lawrence H.

    2017-06-01

    We extend results first announced by Franz et al. (1998) in the abstract, http://adsabs.harvard.edu/abs/1998AAS...19310207F ,that identified vA 351 = H346 in the Hyades as a multiple star system containing a white dwarf. With HST/FGS fringe tracking and scanning, spanning four years, we establish a parallax, relative orbit, and mass fraction for the A-B components, with a period, P~5.47y. With ground-based radial velocities from the McDonald Observatory Struve 2.1m telescope and Sandiford Spectrograph, spanning 14 years, we find that component B consists of BC, two M dwarf stars orbiting with a very short period (P(BC)~0.75 days), having a mass ratio C/B~0.94. We confirm that the total mass of the system can only be reconciled with the distance and component photometry by including a fainter, higher mass component, proposed to be a ~0.8Msun white dwarf. Thus, the quadruple system consists of three M dwarfs (A,B,C) and one white dwarf (D). The M dwarf masses and absolute magnitudes are consistent with the Benedict et al. (2016, http://adsabs.harvard.edu/abs/2016AJ....152..141B) lower Main Sequence Mass-Luminosity Relation. The radial velocity signal has so far yielded a signature only for the short-period BC orbital motion. Velocities from H-α and He I emission lines confirm the BC period from absorption lines, with similar (He I) and higher (H-α) velocity amplitudes.

  11. Multiple causes of apnea in 1p36 deletion syndrome include seizures.

    Science.gov (United States)

    Kanabar, Gorande; Boyd, Stewart; Schugal, Anna; Bhate, Sanjay

    2012-06-01

    Apneic episodes have not previously been described in children with 1p36 deletion syndrome with seizures. Having encountered one such patient, we reviewed our experience of breathing difficulties in this syndrome, with particular attention to evidence of ictal apnea. We describe four children with 1p36 deletion syndrome, seizures and apneic episodes. Retrospective analysis of clinical features, seizure semiology and video-EEG data. All patients showed characteristic craniofacial features, mental retardation, and diffuse hypotonia and apnea. Seizure semiology included focal motor, ± secondary generalized tonic clonic and tonic events. All had histories of status epilepticus; three showed clustering of their habitual seizures. Assessment of apnea was complicated by the presence of multiple other potential causes including obesity, reflux, respiratory, and cardiac problems Epileptic apneas were confirmed in one child by video-telemetry. In three other children, an epileptic basis for apneas was inferred from their clinical histories and treatment response supported by EEG findings. In three children, epileptiform discharges occurred over fronto-centro-temporal regions. Epileptic apnea is a feature of 1p36 deletion syndrome, though episodic apnea is multifactorial in these children, and may need repeated re-appraisal. Copyright © 2012 British Epilepsy Association. Published by Elsevier Ltd. All rights reserved.

  12. AIRE recruits multiple transcriptional components to specific genomic regions through tethering to nuclear matrix.

    Science.gov (United States)

    Tao, Yunxia; Kupfer, Rene; Stewart, Benjamin J; Williams-Skipp, Cheryll; Crowell, Christopher K; Patel, Dhavalkumar D; Sain, Steven; Scheinman, Robert I

    2006-02-01

    Thymic selection requires that diverse self antigens be presented to developing thymocytes by stromal cells. Consistent with this function, medullary thymic epithelial cells have been shown to express a large number of genes, many of which are tissue restricted. Autoimmune regulator (AIRE) is a nuclear protein, which has recently been identified as a regulator of this process, however, the mechanism by which AIRE functions is not well understood. Here we use a transrepression assay to demonstrate that AIRE interacts with multiple components of the transcription complex including a novel interaction with the UBA domain protein, GBDR1. When AIRE is expressed in cultured human thymic epithelial cells, it tightly associates with nuclear matrix, suggesting that AIRE responsive genes may be localized to specific regions. Using a mathematical approach we have re-analyzed an Affymetrix dataset identifying AIRE responsive genes and show that they tend to localize to specific regions of the genome. Together, these data suggest that AIRE regulates gene expression by recruiting components of the transcription complex to specific regions of the genome via interactions with nuclear matrix.

  13. Cerebellar abnormalities contribute to disability including cognitive impairment in multiple sclerosis.

    Directory of Open Access Journals (Sweden)

    Katrin Weier

    Full Text Available The cerebellum is known to be involved not only in motor but also cognitive and affective processes. Structural changes in the cerebellum in relation to cognitive dysfunction are an emerging topic in the field of neuro-psychiatric disorders. In Multiple Sclerosis (MS cerebellar motor and cognitive dysfunction occur in parallel, early in the onset of the disease, and the cerebellum is one of the predilection sites of atrophy. This study is aimed at determining the relationship between cerebellar volumes, clinical cerebellar signs, cognitive functioning and fatigue in MS. Cerebellar volumetry was conducted using T1-weighted MPRAGE magnetic resonance imaging of 172 MS patients. All patients underwent a clinical and brief neuropsychological assessment (information processing speed, working memory, including fatigue testing. Patients with and without cerebellar signs differed significantly regarding normalized cerebellar total volume (nTCV, normalized brain volume (nBV and whole brain T2 lesion volume (LV. Patients with cerebellar dysfunction likewise performed worse in cognitive tests. A regression analysis indicated that age and nTCV explained 26.3% of the variance in SDMT (symbol digit modalities test performance. However, only age, T2 LV and nBV remained predictors in the full model (r(2 = 0.36. The full model for the prediction of PASAT (Paced Auditory Serial Addition Test scores (r(2 = 0.23 included age, cerebellar and T2 LV. In the case of fatigue, only age and nBV (r(2 = 0.17 emerged as significant predictors. These data support the view that cerebellar abnormalities contribute to disability, including cognitive impairment in MS. However, this contribution does not seem to be independent of, and may even be dominated by wider spread MS pathology as reflected by nBV and T2 LV.

  14. Thymoquinone causes multiple effects, including cell death, on dividing plant cells.

    Science.gov (United States)

    Hassanien, Sameh E; Ramadan, Ahmed M; Azeiz, Ahmed Z Abdel; Mohammed, Rasha A; Hassan, Sabah M; Shokry, Ahmed M; Atef, Ahmed; Kamal, Khalid B H; Rabah, Samar; Sabir, Jamal S M; Abuzinadah, Osama A; El-Domyati, Fotouh M; Martin, Gregory B; Bahieldin, Ahmed

    2013-01-01

    Thymoquinone (TQ) is a major constituent of Nigella sativa oil with reported anti-oxidative activity and anti-inflammatory activity in animal cells. It also inhibits proliferation and induces programmed cell death (apoptosis) in human skin cancer cells. The present study sought to detect the influence of TQ on dividing cells of three plant systems and on expression of Bcl2-associated athanogene-like (BAG-like) genes that might be involved during the process of cell death. BAG genes are known for the regulation of diverse physiological processes in animals, including apoptosis, tumorigenesis, stress responses, and cell division. Synthetic TQ at 0.1mg/mL greatly reduced wheat seed germination rate, whereas 0.2mg/mL completely inhibited germination. An Evans blue assay revealed moderate cell death in the meristematic zone of Glycine max roots after 1h of TQ treatment (0.2mg/mL), with severe cell death occurring in this zone after 2h of treatment. Light microscopy of TQ-treated (0.2mg/mL) onion hairy root tips for 1h revealed anti-mitotic activity and also cell death-associated changes, including nuclear membrane disruption and nuclear fragmentation. Transmission electron microscopy of TQ-treated cells (0.2mg/mL) for 1h revealed shrinkage of the plasma membrane, leakage of cell lysate, degradation of cell walls, enlargement of vacuoles and condensation of nuclei. Expression of one BAG-like gene, previously associated with cell death, was induced 20 min after TQ treatment in Glycine max root tip cells. Thus, TQ has multiple effects, including cell death, on dividing plant cells and plants may serve as a useful system to further investigate the mechanisms underlying the response of eukaryotic cells to TQ. © 2013. Published by Elsevier SAS.

  15. A method for integrating multiple components in a decision support system

    Science.gov (United States)

    Donald Nute; Walter D. Potter; Zhiyuan Cheng; Mayukh Dass; Astrid Glende; Frederick Maierv; Cy Routh; Hajime Uchiyama; Jin Wang; Sarah Witzig; Mark Twery; Peter Knopp; Scott Thomasma; H. Michael Rauscher

    2005-01-01

    We present a flexible, extensible method for integrating multiple tools into a single large decision support system (DSS) using a forest ecosystem management DSS (NED-2) as an example. In our approach, a rich ontology for the target domain is developed and implemented in the internal data model for the DSS. Semi-autonomous agents control external components and...

  16. Components of Leadership Giftedness and Multiple Intelligences among Chinese Gifted Students in Hong Kong

    Science.gov (United States)

    Chan, David W.

    2007-01-01

    This study examined the relationships between components of leadership giftedness and multiple intelligences among 510 Chinese gifted students in Hong Kong. These students perceived their strengths in intrapersonal, interpersonal and verbal-linguistic intelligences, and their weaknesses in bodily-kinesthetic and naturalist intelligences. They also…

  17. Thermoelectric material including a multiple transition metal-doped type I clathrate crystal structure

    Science.gov (United States)

    Yang, Jihui [Lakeshore, CA; Shi, Xun [Troy, MI; Bai, Shengqiang [Shanghai, CN; Zhang, Wenqing [Shanghai, CN; Chen, Lidong [Shanghai, CN; Yang, Jiong [Shanghai, CN

    2012-01-17

    A thermoelectric material includes a multiple transition metal-doped type I clathrate crystal structure having the formula A.sub.8TM.sub.y.sub.1.sup.1TM.sub.y.sub.2.sup.2 . . . TM.sub.y.sub.n.sup.nM.sub.zX.sub.46-y.sub.1.sub.-y.sub.2.sub.- . . . -y.sub.n.sub.-z. In the formula, A is selected from the group consisting of barium, strontium, and europium; X is selected from the group consisting of silicon, germanium, and tin; M is selected from the group consisting of aluminum, gallium, and indium; TM.sup.1, TM.sup.2, and TM.sup.n are independently selected from the group consisting of 3d, 4d, and 5d transition metals; and y.sub.1, y.sub.2, y.sub.n and Z are actual compositions of TM.sup.1, TM.sup.2, TM.sup.n, and M, respectively. The actual compositions are based upon nominal compositions derived from the following equation: z=8q.sub.A-|.DELTA.q.sub.1|y.sub.1-|.DELTA.q.sub.2|y.sub.2- . . . -|.DELTA.q.sub.n|y.sub.n, wherein q.sub.A is a charge state of A, and wherein .DELTA.q.sub.1, .DELTA.q.sub.2, .DELTA.q.sub.n are, respectively, the nominal charge state of the first, second, and n-th TM.

  18. Classification of Hypertrophy of Labia Minora: Consideration of a Multiple Component Approach.

    Science.gov (United States)

    González, Pablo I

    2015-11-01

    Labia minora hypertrophy of unknown and under-reported incidence in the general population is considered a variant of normal anatomy. Its origin is multi-factorial including genetic, hormonal, and infectious factors, and voluntary elongation of the labiae minorae in some cultures. Consults with patients bothered by this condition have been increasing with patients complaining of poor aesthetics and symptoms such as difficulty with vaginal secretions, vulvovaginitis, chronic irritation, and superficial dyspareunia, all of which can have a negative effect on these patients' sexuality and self esteem. Surgical management of labial hypertrophy is an option for women with these physical complaints or aesthetic issues. Labia minora hypertrophy can consist of multiple components, including the clitoral hood, lateral prepuce, frenulum, and the body of the labia minora. To date, there is not a consensus in the literature with respect to the classification and definition of varying grades of hypertrophy, aside from measurement of the length in centimeters. In order to offer patients the most appropriate surgical technique, an objective and understandable classification that can be used as part of the preoperative evaluation is necessary. Such a classification should have the aim of offering patients the best cosmetic and functional results with the fewest complications.

  19. Computation of binding energies including their enthalpy and entropy components for protein-ligand complexes using support vector machines.

    Science.gov (United States)

    Koppisetty, Chaitanya A K; Frank, Martin; Kemp, Graham J L; Nyholm, Per-Georg

    2013-10-28

    Computing binding energies of protein-ligand complexes including their enthalpy and entropy terms by means of computational methods is an appealing approach for selecting initial hits and for further optimization in early stages of drug discovery. Despite the importance, computational predictions of thermodynamic components have evaded attention and reasonable solutions. In this study, support vector machines are used for developing scoring functions to compute binding energies and their enthalpy and entropy components of protein-ligand complexes. The binding energies computed from our newly derived scoring functions have better Pearson's correlation coefficients with experimental data than previously reported scoring functions in benchmarks for protein-ligand complexes from the PDBBind database. The protein-ligand complexes with binding energies dominated by enthalpy or entropy term could be qualitatively classified by the newly derived scoring functions with high accuracy. Furthermore, it is found that the inclusion of comprehensive descriptors based on ligand properties in the scoring functions improved the accuracy of classification as well as the prediction of binding energies including their thermodynamic components. The prediction of binding energies including the enthalpy and entropy components using the support vector machine based scoring functions should be of value in the drug discovery process.

  20. A Unified Approach to Functional Principal Component Analysis and Functional Multiple-Set Canonical Correlation.

    Science.gov (United States)

    Choi, Ji Yeh; Hwang, Heungsun; Yamamoto, Michio; Jung, Kwanghee; Woodward, Todd S

    2017-06-01

    Functional principal component analysis (FPCA) and functional multiple-set canonical correlation analysis (FMCCA) are data reduction techniques for functional data that are collected in the form of smooth curves or functions over a continuum such as time or space. In FPCA, low-dimensional components are extracted from a single functional dataset such that they explain the most variance of the dataset, whereas in FMCCA, low-dimensional components are obtained from each of multiple functional datasets in such a way that the associations among the components are maximized across the different sets. In this paper, we propose a unified approach to FPCA and FMCCA. The proposed approach subsumes both techniques as special cases. Furthermore, it permits a compromise between the techniques, such that components are obtained from each set of functional data to maximize their associations across different datasets, while accounting for the variance of the data well. We propose a single optimization criterion for the proposed approach, and develop an alternating regularized least squares algorithm to minimize the criterion in combination with basis function approximations to functions. We conduct a simulation study to investigate the performance of the proposed approach based on synthetic data. We also apply the approach for the analysis of multiple-subject functional magnetic resonance imaging data to obtain low-dimensional components of blood-oxygen level-dependent signal changes of the brain over time, which are highly correlated across the subjects as well as representative of the data. The extracted components are used to identify networks of neural activity that are commonly activated across the subjects while carrying out a working memory task.

  1. A novel GMO biosensor for rapid ultrasensitive and simultaneous detection of multiple DNA components in GMO products.

    Science.gov (United States)

    Huang, Lin; Zheng, Lei; Chen, Yinji; Xue, Feng; Cheng, Lin; Adeloju, Samuel B; Chen, Wei

    2015-04-15

    Since the introduction of genetically modified organisms (GMOs), there has been on-going and continuous concern and debates on the commercialization of products derived from GMOs. There is an urgent need for development of highly efficient analytical methods for rapid and high throughput screening of GMOs components, as required for appropriate labeling of GMO-derived foods, as well as for on-site inspection and import/export quarantine. In this study, we describe, for the first time, a multi-labeling based electrochemical biosensor for simultaneous detection of multiple DNA components of GMO products on the same sensing interface. Two-round signal amplification was applied by using both an exonuclease enzyme catalytic reaction and gold nanoparticle-based bio-barcode related strategies, respectively. Simultaneous multiple detections of different DNA components of GMOs were successfully achieved with satisfied sensitivity using this electrochemical biosensor. Furthermore, the robustness and effectiveness of the proposed approach was successfully demonstrated by application to various GMO products, including locally obtained and confirmed commercial GMO seeds and transgenetic plants. The proposed electrochemical biosensor demonstrated unique merits that promise to gain more interest in its use for rapid and on-site simultaneous multiple screening of different components of GMO products. Copyright © 2014 Elsevier B.V. All rights reserved.

  2. The effect of fatigability on expanded disability status scale components in multiple sclerosis

    Directory of Open Access Journals (Sweden)

    Dujmović Irena

    2016-01-01

    Full Text Available Introduction. The Expanded Disability Status Scale (EDSS is the most widely used disability measure in multiple sclerosis (MS. The effect of fatigability on EDSS components has been underreported to date. Objective We investigated daytime variability in EDSS score and EDSS components - functional scores (FS and walking distance (WD up to 500 m, in MS patients who underwent a standardized fatiguing exercise. Methods. Twenty-four patients with relapsing-remitting MS (n = 7, secondary-progressive MS (n = 8 and primary-progressive MS (n = 9 were included. Exclusion criteria were as follows: current MS relapse, infection/fever/flu-like symptoms, conditions prohibiting safe exercise testing, current medication affecting fatigue. One trained examiner performed baseline (BL and follow-up (FU assessments (FU1 after a standardized fatiguing exercise, FU2 after rest over a single day. EDSS score change of ≥1 point if BL EDSS score was <5.5 or of ≥0.5 point if BL EDSS score was ≥5.5 were considered clinically meaningful. Results. In progressive MS subtypes, WD decreased at FU1, but recovered at FU2, more so in secondaryprogressive MS subgroup with the highest BL EDSS score. Although BL EDSS scores (median, 5.0; range 4.0-6.5 and FS remained relatively stable over repeated assessments in the total group, a clinically meaningful transitory post-exercise EDSS score increase was observed in three patients with progressive MS. Conclusion. WD seems to be more influenced by fatigability than the total EDSS score, more so in patients with progressive MS and higher disability. WD should be assessed after rest and this strategy should be implemented into protocols of clinical trials recruiting patients with progressive MS phenotypes.

  3. DIFFERENTIAL EMISSION MEASURE ANALYSIS OF MULTIPLE STRUCTURAL COMPONENTS OF CORONAL MASS EJECTIONS IN THE INNER CORONA

    International Nuclear Information System (INIS)

    Cheng, X.; Ding, M. D.; Zhang, J.; Saar, S. H.

    2012-01-01

    In this paper, we study the temperature and density properties of multiple structural components of coronal mass ejections (CMEs) using differential emission measure (DEM) analysis. The DEM analysis is based on the six-passband EUV observations of solar corona from the Atmospheric Imaging Assembly on board the Solar Dynamic Observatory. The structural components studied include the hot channel in the core region (presumably the magnetic flux rope of the CME), the bright loop-like leading front (LF), and coronal dimming in the wake of the CME. We find that the presumed flux rope has the highest average temperature (>8 MK) and density (∼1.0 × 10 9 cm –3 ), resulting in an enhanced emission measure over a broad temperature range (3 ≤ T(MK) ≤ 20). On the other hand, the CME LF has a relatively cool temperature (∼2 MK) and a narrow temperature distribution similar to the pre-eruption coronal temperature (1 ≤ T(MK) ≤ 3). The density in the LF, however, is increased by 2%-32% compared with that of the pre-eruption corona, depending on the event and location. In coronal dimmings, the temperature is more broadly distributed (1 ≤ T(MK) ≤ 4), but the density decreases by ∼35%-∼40%. These observational results show that: (1) CME core regions are significantly heated, presumably through magnetic reconnection; (2) CME LFs are a consequence of compression of ambient plasma caused by the expansion of the CME core region; and (3) the dimmings are largely caused by the plasma rarefaction associated with the eruption.

  4. Mixture Statistical Distribution Based Multiple Component Model for Target Detection in High Resolution SAR Imagery

    Directory of Open Access Journals (Sweden)

    Chu He

    2017-11-01

    Full Text Available This paper proposes an innovative Mixture Statistical Distribution Based Multiple Component (MSDMC model for target detection in high spatial resolution Synthetic Aperture Radar (SAR images. Traditional detection algorithms usually ignore the spatial relationship among the target’s components. In the presented method, however, both the structural information and the statistical distribution are considered to better recognize the target. Firstly, the method based on compressed sensing reconstruction is used to recover the SAR image. Then, the multiple component model composed of a root filter and some corresponding part filters is applied to describe the structural information of the target. In the following step, mixture statistical distributions are utilised to discriminate the target from the background, and the Method of Logarithmic Cumulants (MoLC based Expectation Maximization (EM approach is adopted to estimate the parameters of the mixture statistical distribution model, which will be finally merged into the proposed MSDMC framework together with the multiple component model. In the experiment, the aeroplanes and the electrical power towers in TerraSAR-X SAR images are detected at three spatial resolutions. The results indicate that the presented MSDMC Model has potential for improving the detection performance compared with the state-of-the-art SAR target detection methods.

  5. Characterizing functional connectivity during rest in multiple sclerosis patients versus healthy volunteers using independent component analysis

    Energy Technology Data Exchange (ETDEWEB)

    Palacio Garcia, L.; Andrzejak, R.; Prchkovska, V.; Rodrigues, P.

    2016-07-01

    It is commonly thought that our brain is not active when it does not receive any external input. However, during rest, there are still certain distant regions of the brain that are functionally correlated between them: the so-called resting-state networks. This functional connectivity of the brain is disrupted in many neurological diseases. In particular, it has been shown that one of the most studied resting-state networks (the default-mode network) is affected in multiple sclerosis, which is the most common disabling neurological condition affecting the central nervous system of young adults. In this work, I focus on the study of the differences in the resting-state networks between multiple sclerosis patients and healthy volunteers. In order to study the effects of multiple sclerosis on the functional connectivity of the brain, a numerical method known as independent component analysis (ICA) is applied. This technique divides the resting-state fMRI data into independent components. Nonetheless, noise, which could be due to head motion or physiological artifacts, may corrupt the data by indicating a false activation. Therefore, I create a web user interface that allows the user to manually classify all the independent components for a given subject. Eventually, the components classified as noise should be removed from the functional data in order to prevent them from taking part in any further analysis. (Author)

  6. Plasma Cell Neoplasms (Including Multiple Myeloma) Treatment (PDQ®)—Patient Version

    Science.gov (United States)

    Plasma cell neoplasms occur when abnormal plasma cells or myeloma cells form tumors in the bones or soft tissues of the body. Multiple myeloma, plasmacytoma, lymphoplasmacytic lymphoma, and monoclonal gammopathy of undetermined significance (MGUS) are different types of plasma cell neoplasms. Find out about risk factors, symptoms, diagnostic tests, prognosis, and treatment for these diseases.

  7. Evaluation of multiple small-angle neutron scattering including magnetic interactions

    Czech Academy of Sciences Publication Activity Database

    Šaroun, Jan

    2007-01-01

    Roč. 40, s1 (2007), s701-s705 ISSN 0021-8898. [XIII International Conference on Small - Angle Scattering . Kyoto, 09.07.2006-13.07.2006] Institutional research plan: CEZ:AV0Z10480505 Keywords : multiple small - angle scattering * neutron scattering * ferromagnets Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.629, year: 2007

  8. A Case Study of Tack Tiles[R] Literacy Instruction for a Student with Multiple Disabilities Including Congenital Blindness

    Science.gov (United States)

    Klenk, Jessicia A.; Pufpaff, Lisa A.

    2011-01-01

    Research on literacy instruction for students with multiple disabilities is limited. Empirical research on braille instruction for students with multiple disabilities that include congenital blindness is virtually nonexistent. This case study offers initial insight into possible methods of early braille literacy instruction for a student with…

  9. Virtual reality and claustrophobia: multiple components therapy involving game editor virtual environments exposure.

    Science.gov (United States)

    Malbos, E; Mestre, D R; Note, I D; Gellato, C

    2008-12-01

    The effectiveness of a multiple components therapy regarding claustrophobia and involving virtual reality (VR) will be demonstrated through a trial which immersed six claustrophobic patients in multiple context-graded enclosed virtual environments (VE) using affordable VR apparatus and software. The results of the questionnaires and behavior tests exhibited a significant reduction in fear towards the enclosed space and quality of life improvement. Such gains were maintained at 6-month follow-up. Presence score indicated the patients felt immersed and present inside the game editor VE.

  10. Clinical problems of multiple primary cancers including head and neck cancers. From the viewpoint of radiotherapy

    International Nuclear Information System (INIS)

    Nishio, Masamichi; Myojin, Miyako; Nishiyama, Noriaki; Taguchi, Hiroshi; Takagi, Masaru; Tanaka, Katsuhiko

    2003-01-01

    A total of 2144 head and neck cancers were treated by radiotherapy at the National Sapporo Hospital between 1974 and 2001. Of these, 313 (14.6%) were found to have other primary cancers besides head and neck cancer, in which double cancers were 79% and triple or more cancers were 21%. Frequency according to primary site of the first head and neck cancer was oral cavity: 107/603 (17.7%), epipharynx cancer: 7/117 (6.0%), oropharyngeal cancer: 63/257 (24.5%), hypopharyngeal cancer: 65/200 (32.5%), laryngeal cancer: 114/558 (20.4%), and nose/paranasal sinus: 4.9% respectively. Esophageal cancer, head and neck cancer, lung cancer and gastric cancer were very frequent as other primary sites combined with the head and neck. The first onset region was the head and neck in 233 out of 313 cases with multiple primary cancers. The five-year survival rate from the onset of head and neck cancers is 52%, 10-year: 30%, and 5-year cause-specific survival rate 82%, and 10-year: 78%, respectively. The treatment possibilities in multiple primary cancers tend to be limited because the treatment areas are sometimes overlapped. New approaches to the treatment of multiple primary cancers should be considered in the future. (author)

  11. Multiple Crack Growth Prediction in AA2024-T3 Friction Stir Welded Joints, Including Manufacturing Effects

    DEFF Research Database (Denmark)

    Carlone, Pierpaolo; Citarella, Roberto; Sonne, Mads Rostgaard

    2016-01-01

    A great deal of attention is currently paid by several industries toward the friction stir welding process to realize lightweight structures. Within this aim, the realistic prediction of fatigue behavior of welded assemblies is a key factor. In this work an integrated finite element method - dual...... boundary element method (FEM-DBEM) procedure, coupling the welding process simulation to the subsequent crack growth assessment, is proposed and applied to simulate multiple crack propagation, with allowance for manufacturing effects. The friction stir butt welding process of the precipitation hardened AA...

  12. Multiple sound source localization using gammatone auditory filtering and direct sound componence detection

    Science.gov (United States)

    Chen, Huaiyu; Cao, Li

    2017-06-01

    In order to research multiple sound source localization with room reverberation and background noise, we analyze the shortcomings of traditional broadband MUSIC and ordinary auditory filtering based broadband MUSIC method, then a new broadband MUSIC algorithm with gammatone auditory filtering of frequency component selection control and detection of ascending segment of direct sound componence is proposed. The proposed algorithm controls frequency component within the interested frequency band in multichannel bandpass filter stage. Detecting the direct sound componence of the sound source for suppressing room reverberation interference is also proposed, whose merits are fast calculation and avoiding using more complex de-reverberation processing algorithm. Besides, the pseudo-spectrum of different frequency channels is weighted by their maximum amplitude for every speech frame. Through the simulation and real room reverberation environment experiments, the proposed method has good performance. Dynamic multiple sound source localization experimental results indicate that the average absolute error of azimuth estimated by the proposed algorithm is less and the histogram result has higher angle resolution.

  13. Nonparametric predictive inference for reliability of a k-out-of-m:G system with multiple component types

    International Nuclear Information System (INIS)

    Aboalkhair, Ahmad M.; Coolen, Frank P.A.; MacPhee, Iain M.

    2014-01-01

    Nonparametric predictive inference for system reliability has recently been presented, with specific focus on k-out-of-m:G systems. The reliability of systems is quantified by lower and upper probabilities of system functioning, given binary test results on components, taking uncertainty about component functioning and indeterminacy due to limited test information explicitly into account. Thus far, systems considered were series configurations of subsystems, with each subsystem i a k i -out-of-m i :G system which consisted of only one type of components. Key results are briefly summarized in this paper, and as an important generalization new results are presented for a single k-out-of-m:G system consisting of components of multiple types. The important aspects of redundancy and diversity for such systems are discussed. - Highlights: • New results on nonparametric predictive inference for system reliability. • Prediction of system reliability based on test data for components. • New insights on system redundancy optimization and diversity. • Components that appear inferior in tests may be included to enhance redundancy

  14. Multiple shooting applied to robust reservoir control optimization including output constraints on coherent risk measures

    DEFF Research Database (Denmark)

    Codas, Andrés; Hanssen, Kristian G.; Foss, Bjarne

    2017-01-01

    . In this work, we propose a new formulation for robust optimization of reservoir well controls. It is inspired by the multiple shooting (MS) method which permits a broad range of parallelization opportunities and output constraint handling. This formulation exploits coherent risk measures, a concept...... traditionally used in finance, to bound the risk on constraint violation. We propose a reduced sequential quadratic programming (rSQP) algorithm to solve the underlying optimization problem. This algorithm exploits the structure of the coherent risk measures, thus a large set of constraints are solved within...... sub-problems. Moreover, a variable elimination procedure allows solving the optimization problem in a reduced space and an iterative active-set method helps to handle a large set of inequality constraints. Finally, we demonstrate the application of constraints to bound the risk of water production...

  15. Multiple Crack Growth Prediction in AA2024-T3 Friction Stir Welded Joints, Including Manufacturing Effects

    DEFF Research Database (Denmark)

    Carlone, Pierpaolo; Citarella, Roberto; Sonne, Mads Rostgaard

    2016-01-01

    boundary element method (FEM-DBEM) procedure, coupling the welding process simulation to the subsequent crack growth assessment, is proposed and applied to simulate multiple crack propagation, with allowance for manufacturing effects. The friction stir butt welding process of the precipitation hardened AA......2024-T3 alloy was simulated using a thermo-mechanical FEM model to predict the process induced residual stress field and material softening. The computed stress field was transferred to a DBEM environment and superimposed to the stress field produced by a remote fatigue traction load applied...... on a notched specimen. The whole procedure was finally tested comparing simulation outcomes with experimental data. The good agreement obtained highlights the predictive capability of the method. The influence of the residual stress distribution on crack growth and the mutual interaction between propagating...

  16. Time-correlated single-photon counting study of multiple photoluminescence lifetime components of silicon nanoclusters

    Energy Technology Data Exchange (ETDEWEB)

    Diamare, D., E-mail: d.diamare@ee.ucl.ac.uk [Department of Electronic and Electrical Engineering, University College London, Torrington Place, London, WC1E 7JE (United Kingdom); Wojdak, M. [Department of Electronic and Electrical Engineering, University College London, Torrington Place, London, WC1E 7JE (United Kingdom); Lettieri, S. [Institute for Superconductors and Innovative Materials, National Council of Research (CNR-SPIN), Via Cintia 80126, Naples (Italy); Department of Physical Sciences, University of Naples “Federico II”, Via Cintia 80126, Naples (Italy); Kenyon, A.J. [Department of Electronic and Electrical Engineering, University College London, Torrington Place, London, WC1E 7JE (United Kingdom)

    2013-04-15

    We report time-resolved photoluminescence measurements of thin films of silica containing silicon nanoclusters (Si NCs), produced by PECVD and annealed at temperatures between 700 °C and 1150 °C. While the near infrared emission of Si NCs has long been studied, visible light emission has only recently attracted interest due to its very short decay times and its recently-reported redshift with decreasing NCs size. We analyse the PL decay dynamics in the range 450–700 nm with picosecond time resolution using Time Correlated Single Photon Counting. In the resultant multi-exponential decays two dominant components can clearly be distinguished: a very short component, in the range of hundreds of picoseconds, and a nanosecond component. In this wavelength range we do not detect the microsecond component generally associated with excitonic recombination. We associate the nanosecond component to defect relaxation: it decreases in intensity in the sample annealed at higher temperature, suggesting that the contribution from defects decreases with increasing temperature. The origin of the very fast PL component (ps time region) is also discussed. We show that it is consistent with the Auger recombination times of multiple excitons. Further work needs to be done in order to assess the contribution of the Auger-controlled recombinations to the defect-assisted mechanism of photoluminescence. -- Highlights: ► We report time-resolved PL measurements of Si-Ncs embedded in SiO{sub 2} matrix. ► Net decrease of PL with increasing the annealing temperature has been observed. ► Lifetime distribution analysis revealed a multiexponential decay with ns and ps components. ► Ps components are consistent with the lifetime range of the Auger recombination times. ► No evidence for a fast direct transition at the Brillouin zone centre.

  17. Human alveolar macrophage responses to air pollution particulates are associated with insoluble components of coarse material, including particulate endotoxin.

    Science.gov (United States)

    Soukup, J M; Becker, S

    2001-02-15

    Inhalation of particulate matter in the ambient air has been shown to cause pulmonary morbidity and exacerbate asthma. Alveolar macrophage (AM) are essential for effective removal of inhaled particles and microbes in the lower airways. While some particles minimally effect AM function others inhibit antimicrobial activity or cause cytokine and growth factor production leading to inflammation and tissue remodeling. This study has investigated the effects of water soluble (s) and insoluble (is) components of Chapel Hill, North Carolina ambient particulate matter in the size ranges 0.1-2.5 microm (PM2.5) and 2.5-10 microm (PM10) diameter, on human AM IL-6, TNFalpha, and MCP-1 cytokine production and host defense mechanisms including phagocytosis and oxidant production. Cytokines were found to be induced by isPM10 to a much higher extent (>50-fold) than sPM10, which in turn stimulated production better than isPM2.5, while sPM2.5 was inactive. Previous studies have indicated that endotoxin (ETOX) is a component of sPM10 responsible for cytokine production. Here, it is shown that inhibition of isPM10-induced cytokine production was partially achieved with polymyxin B and LPS-binding protein (LBP), but not with a metal chelator, implicating ETOX as a cytokine-inducing moiety also in isPM10. In addition to inducing cytokines, exposure to isPM10, but not the other PM fractions, also inhibited phagocytosis and oxidant generation in response to yeast. This inhibition was ETOX independent. The decrease in host defenses may be the result of apoptosis in the AM population, which was also found to be specifically caused by isPM10. These results show that the functional capacity of AM is selectively modulated by insoluble components of coarse PM, including the biocontaminant ETOX.

  18. Multiple amino acid sequence alignment nitrogenase component 1: insights into phylogenetics and structure-function relationships.

    Directory of Open Access Journals (Sweden)

    James B Howard

    Full Text Available Amino acid residues critical for a protein's structure-function are retained by natural selection and these residues are identified by the level of variance in co-aligned homologous protein sequences. The relevant residues in the nitrogen fixation Component 1 α- and β-subunits were identified by the alignment of 95 protein sequences. Proteins were included from species encompassing multiple microbial phyla and diverse ecological niches as well as the nitrogen fixation genotypes, anf, nif, and vnf, which encode proteins associated with cofactors differing at one metal site. After adjusting for differences in sequence length, insertions, and deletions, the remaining >85% of the sequence co-aligned the subunits from the three genotypes. Six Groups, designated Anf, Vnf , and Nif I-IV, were assigned based upon genetic origin, sequence adjustments, and conserved residues. Both subunits subdivided into the same groups. Invariant and single variant residues were identified and were defined as "core" for nitrogenase function. Three species in Group Nif-III, Candidatus Desulforudis audaxviator, Desulfotomaculum kuznetsovii, and Thermodesulfatator indicus, were found to have a seleno-cysteine that replaces one cysteinyl ligand of the 8Fe:7S, P-cluster. Subsets of invariant residues, limited to individual groups, were identified; these unique residues help identify the gene of origin (anf, nif, or vnf yet should not be considered diagnostic of the metal content of associated cofactors. Fourteen of the 19 residues that compose the cofactor pocket are invariant or single variant; the other five residues are highly variable but do not correlate with the putative metal content of the cofactor. The variable residues are clustered on one side of the cofactor, away from other functional centers in the three dimensional structure. Many of the invariant and single variant residues were not previously recognized as potentially critical and their identification

  19. The dyad palindromic glutathione transferase P enhancer binds multiple factors including AP1.

    Science.gov (United States)

    Diccianni, M B; Imagawa, M; Muramatsu, M

    1992-10-11

    Glutathione Transferase P (GST-P) gene expression is dominantly regulated by an upstream enhancer (GPEI) consisting of a dyad of palindromically oriented imperfect TPA (12-O-tetradecanoyl-phorbol-13-acetate)-responsive elements (TRE). GPEI is active in AP1-lacking F9 cells as well in AP1-containing HeLa cells. Despite GPEI's similarity to a TRE, c-jun co-transfection has only a minimal effect on transactivation. Antisense c-jun and c-fos co-transfection experiments further demonstrate the lack of a role for AP1 in GPEI mediated trans-activation in F9 cells, although endogenously present AP1 can influence GPEI in HeLa cells. Co-transfection of delta fosB with c-jun, which forms an inactive c-Jun/delta FosB heterodimer that binds TRE sequences, inhibits GPEI-mediated transcription in AP1-lacking F9 cells as well as AP1-containing HeLa cells. These data suggest novel factor(s) other than AP1 are influencing GPEI. Binding studies reveal multiple nucleoproteins bind to GPEI. These factors are likely responsible for the high level of GPEI-mediated transcription observed in the absence of AP1 and during hepatocarcinogenesis.

  20. Using Photovoice to Include People with Profound and Multiple Learning Disabilities in Inclusive Research

    Science.gov (United States)

    Cluley, Victoria

    2017-01-01

    Background: It is now expected that projects addressing the lives of people with learning disabilities include people with learning disabilities in the research process. In the past, such research often excluded people with learning disabilities, favouring the opinions of family members, carers and professionals. The inclusion of the voices of…

  1. Prospective evaluation of dermatologic surgery complications including patients on multiple antiplatelet and anticoagulant medications.

    Science.gov (United States)

    Bordeaux, Jeremy S; Martires, Kathryn J; Goldberg, Dori; Pattee, Sean F; Fu, Pingfu; Maloney, Mary E

    2011-09-01

    Few prospective studies have evaluated the safety of dermatologic surgery. We sought to determine rates of bleeding, infection, flap and graft necrosis, and dehiscence in outpatient dermatologic surgery, and to examine their relationship to type of repair, anatomic location of repair, antibiotic use, antiplatelet use, or anticoagulant use. Patients presenting to University of Massachusetts Medical School Dermatology Clinic for surgery during a 15-month period were prospectively entered. Medications, procedures, and complications were recorded. Of the 1911 patients, 38% were on one anticoagulant or antiplatelet medication, and 8.0% were on two or more. Risk of hemorrhage was 0.89%. Complex repair (odds ratio [OR] = 5.80), graft repair (OR = 7.58), flap repair (OR = 11.93), and partial repair (OR = 43.13) were more likely to result in bleeding than intermediate repair. Patients on both clopidogrel and warfarin were 40 times more likely to have bleeding complications than all others (P = .03). Risk of infection was 1.3%, but was greater than 3% on the genitalia, scalp, back, and leg. Partial flap necrosis occurred in 1.7% of flaps, and partial graft necrosis occurred in 8.6% of grafts. Partial graft necrosis occurred in 20% of grafts on the scalp and 10% of grafts on the nose. All complications resolved without sequelae. The study was limited to one academic dermatology practice. The rate of complications in dermatologic surgery is low, even when multiple oral anticoagulant and antiplatelet medications are continued, and prophylactic antibiotics are not used. Closure type and use of warfarin or clopidogrel increase bleeding risk. However, these medications should be continued to avoid adverse thrombotic events. Copyright © 2011 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  2. Identification of Multiple Novel Viruses, Including a Parvovirus and a Hepevirus, in Feces of Red Foxes

    Science.gov (United States)

    van der Giessen, Joke; Haagmans, Bart L.; Osterhaus, Albert D. M. E.; Smits, Saskia L.

    2013-01-01

    Red foxes (Vulpes vulpes) are the most widespread members of the order of Carnivora. Since they often live in (peri)urban areas, they are a potential reservoir of viruses that transmit from wildlife to humans or domestic animals. Here we evaluated the fecal viral microbiome of 13 red foxes by random PCR in combination with next-generation sequencing. Various novel viruses, including a parvovirus, bocavirus, adeno-associated virus, hepevirus, astroviruses, and picobirnaviruses, were identified. PMID:23616657

  3. Morning surge in blood pressure using a random-effects multiple-component cosinor model.

    Science.gov (United States)

    Madden, J M; Browne, L D; Li, X; Kearney, P M; Fitzgerald, A P

    2018-01-29

    Blood pressure (BP) fluctuates throughout the day. The pattern it follows represents one of the most important circadian rhythms in the human body. For example, morning BP surge has been suggested as a potential risk factor for cardiovascular events occurring in the morning, but the accurate quantification of this phenomenon remains a challenge. Here, we outline a novel method to quantify morning surge. We demonstrate how the most commonly used method to model 24-hour BP, the single cosinor approach, can be extended to a multiple-component cosinor random-effects model. We outline how this model can be used to obtain a measure of morning BP surge by obtaining derivatives of the model fit. The model is compared with a functional principal component analysis that determines the main components of variability in the data. Data from the Mitchelstown Study, a population-based study of Irish adults (n = 2047), were used where a subsample (1207) underwent 24-hour ambulatory blood pressure monitoring. We demonstrate that our 2-component model provided a significant improvement in fit compared with a single model and a similar fit to a more complex model captured by b-splines using functional principal component analysis. The estimate of the average maximum slope was 2.857 mmHg/30 min (bootstrap estimates; 95% CI: 2.855-2.858 mmHg/30 min). Simulation results allowed us to quantify the between-individual SD in maximum slopes, which was 1.02 mmHg/30 min. By obtaining derivatives we have demonstrated a novel approach to quantify morning BP surge and its variation between individuals. This is the first demonstration of cosinor approach to obtain a measure of morning surge. Copyright © 2018 John Wiley & Sons, Ltd.

  4. Phenotypic Suppression of Streptomycin Resistance by Mutations in Multiple Components of the Translation Apparatus

    OpenAIRE

    Carr, Jennifer F.; Lee, Hannah J.; Jaspers, Joshua B.; Dahlberg, Albert E.; Jogl, Gerwald; Gregory, Steven T.

    2015-01-01

    The bacterial ribosome and its associated translation factors are frequent targets of antibiotics, and antibiotic resistance mutations have been found in a number of these components. Such mutations can potentially interact with one another in unpredictable ways, including the phenotypic suppression of one mutation by another. These phenotypic interactions can provide evidence of long-range functional interactions throughout the ribosome and its functional complexes and potentially give insig...

  5. A global mismatch in the protection of multiple marine biodiversity components and ecosystem services

    DEFF Research Database (Denmark)

    Lindegren, Martin; Holt, Ben G.; MacKenzie, Brian R.

    2018-01-01

    The global loss of biodiversity threatens unique biota and the functioning and services of ecosystems essential for human wellbeing. To safeguard biodiversity and ecosystem services, designating protected areas is crucial; yet the extent to which the existing placement of protection is aligned...... to meet these conservation priorities is questionable, especially in the oceans. Here we investigate and compare global patterns of multiple biodiversity components (taxonomic, phylogenetic and functional), ecosystem services and human impacts, with the coverage of marine protected areas across a nested...... that global patterns of biodiversity, ecosystem services and human impacts are poorly correlated, hence complicating the identification of generally applicable spatial prioritization schemes. However, a hypothetical "consensus approach" would have been able to address all these conservation priorities far...

  6. A Novel Power-Saving Transmission Scheme for Multiple-Component-Carrier Cellular Systems

    Directory of Open Access Journals (Sweden)

    Yao-Liang Chung

    2016-04-01

    Full Text Available As mobile data traffic levels have increased exponentially, resulting in rising energy costs in recent years, the demand for and development of green communication technologies has resulted in various energy-saving designs for cellular systems. At the same time, recent technological advances have allowed multiple component carriers (CCs to be simultaneously utilized in a base station (BS, a development that has made the energy consumption of BSs a matter of increasing concern. To help address this concern, herein we propose a novel scheme aimed at efficiently minimizing the power consumption of BS transceivers during transmission, while still ensuring good service quality and fairness for users. Specifically, the scheme utilizes the dynamic activation/deactivation of CCs during data transmission to increase power usage efficiency. To test its effectiveness, the proposed scheme was applied to a model consisting of a BS with orthogonal frequency division multiple access-based CCs in a downlink transmission environment. The results indicated that, given periods of relatively light traffic loads, the total power consumption of the proposed scheme is significantly lower than that of schemes in which all the CCs of a BS are constantly activated, suggesting the scheme’s potential for reducing both energy costs and carbon dioxide emissions.

  7. A weighted information criterion for multiple minor components and its adaptive extraction algorithms.

    Science.gov (United States)

    Gao, Yingbin; Kong, Xiangyu; Zhang, Huihui; Hou, Li'an

    2017-05-01

    Minor component (MC) plays an important role in signal processing and data analysis, so it is a valuable work to develop MC extraction algorithms. Based on the concepts of weighted subspace and optimum theory, a weighted information criterion is proposed for searching the optimum solution of a linear neural network. This information criterion exhibits a unique global minimum attained if and only if the state matrix is composed of the desired MCs of an autocorrelation matrix of an input signal. By using gradient ascent method and recursive least square (RLS) method, two algorithms are developed for multiple MCs extraction. The global convergences of the proposed algorithms are also analyzed by the Lyapunov method. The proposed algorithms can extract the multiple MCs in parallel and has advantage in dealing with high dimension matrices. Since the weighted matrix does not require an accurate value, it facilitates the system design of the proposed algorithms for practical applications. The speed and computation advantages of the proposed algorithms are verified through simulations. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Multiple component system of sugars and polyols in the overwintering spruce bark beetle, Ips typographus.

    Science.gov (United States)

    Kostál, V; Zahradnícková, H; Simek, P; Zelený, J

    2007-06-01

    Overwintering adults of the spruce bark beetle, Ips typographus (L.) showed an unusually complex sugar/polyol cryoprotectant system. The major components of the multiple system were: glucose (177.6 mmolL(-1), March); trehalose (175.0 mmolL(-1), December); sorbitol (147.9 mmolL(-1), January); mannitol (81.2 mmolL(-1), March); and erythritol (40.7mmolL(-1), March) (in the parentheses, the maximum concentrations are shown and the month when they were reached). Other minor components were glycerol, fructose, threitol, myo-inositol, arabinitol and ribitol. Distinct seasonal patterns of accumulation/depletion in various components were found. Glycerol, trehalose and glucose started to accumulate first, during early autumn, when the air temperatures fluctuated between 20 and 0 degrees C, and diapause beetles continued in feeding. Glycerol was depleted, glucose remained stable and trehalose continued in accumulation during late autumn when the temperatures oscillated around 0 degrees C. During early winter severe frosts reaching -20 degrees C came, the beetles terminated their diapause and trehalose was partially depleted, while mannitol, sorbitol, fructose, threitol and erythritol started to accumulate. Cold weather continued also during late winter when the beetles remained quiescent. During this period, trehalose was re-accumulated, threitol and erythritol continued to increase, mannitol remained stable and sorbitol, fructose decreased. All cryoprotectans were finally cleared in the beetles which were spontaneously leaving bark during early spring. The seasonal maximum of total concentration of all cryoprotectants (578.2 mOsmol L(-1)) was reached in March. Such a concentration results in colligative depression of melting point of body fluids down by 1.08 degrees C only. It suggests that the potential cryoprotective effect of accumulated sugars and polyols was related rather to their non-colligative functions.

  9. Accounting for multiple climate components when estimating climate change exposure and velocity

    Science.gov (United States)

    Nadeau, Christopher P.; Fuller, Angela K.

    2015-01-01

    The effect of anthropogenic climate change on organisms will likely be related to climate change exposure and velocity at local and regional scales. However, common methods to estimate climate change exposure and velocity ignore important components of climate that are known to affect the ecology and evolution of organisms.We develop a novel index of climate change (climate overlap) that simultaneously estimates changes in the means, variation and correlation between multiple weather variables. Specifically, we estimate the overlap between multivariate normal probability distributions representing historical and current or projected future climates. We provide methods for estimating the statistical significance of climate overlap values and methods to estimate velocity using climate overlap.We show that climates have changed significantly across 80% of the continental United States in the last 32 years and that much of this change is due to changes in the variation and correlation between weather variables (two statistics that are rarely incorporated into climate change studies). We also show that projected future temperatures are predicted to be locally novel (<1·5% overlap) across most of the global land surface and that exposure is likely to be highest in areas with low historical climate variation. Last, we show that accounting for changes in the variation and correlation between multiple weather variables can dramatically affect velocity estimates; mean velocity estimates in the continental United States were between 3·1 and 19·0 km yr−1when estimated using climate overlap compared to 1·4 km yr−1 when estimated using traditional methods.Our results suggest that accounting for changes in the means, variation and correlation between multiple weather variables can dramatically affect estimates of climate change exposure and velocity. These climate components are known to affect the ecology and evolution of organisms, but are ignored by most measures

  10. Multiple fault detection and diagnosis in a gas turbine using nonlinear principal component analysis and structured residuals

    OpenAIRE

    Rincon-Charris, Amilcar; Quevedo Casín, Joseba Jokin

    2013-01-01

    Multiple fault detection and diagnosis is a challenging problem because the number of candidates grows exponentially in the number of faults. In add ition, multiple faults in dynamic systems may be hard to detect, because they can mask or compensate each other’s effects. This paper presents the study of the detection and diagnosis of multiple faults in a SR-30 Gas Turbine using nonlinear principal component analys is as the detection method and structured residua...

  11. Divergent Immunomodulation Capacity of Individual Myelin Peptides—Components of Liposomal Therapeutic against Multiple Sclerosis

    Directory of Open Access Journals (Sweden)

    Vilena V. Ivanova

    2017-10-01

    Full Text Available Multiple sclerosis (MS is an autoimmune disease characterized by demyelination and consequent neuron injury. Although the pathogenesis of MS is largely unknown, a breach in immune self-tolerance to myelin followed by development of autoreactive encephalitogenic T cells is suggested to play the central role. The myelin basic protein (MBP is believed to be one of the main targets for autoreactive lymphocytes. Recently, immunodominant MBP peptides encapsulated into the mannosylated liposomes, referred as Xemys, were shown to suppress development of experimental autoimmune encephalomyelitis, a rodent model of MS, and furthermore passed the initial stage of clinical trials. Here, we investigated the role of individual polypeptide components [MBP peptides 46–62 (GH17, 124–139 (GK16, and 147–170 (QR24] of this liposomal peptide therapeutic in cytokine release and activation of immune cells from MS patients and healthy donors. The overall effects were assessed using peripheral blood mononuclear cells (PBMCs, whereas alterations in antigen-presenting capacities were studied utilizing plasmacytoid dendritic cells (pDCs. Among three MBP-immunodominant peptides, QR24 and GK16 activated leukocytes, while GH17 was characterized by an immunosuppressive effect. Peptides QR24 and GK16 upregulated CD4 over CD8 T cells and induced proliferation of CD25+ cells, whereas GH17 decreased the CD4/CD8 T cell ratio and had limited effects on CD25+ T cells. Accordingly, components of liposomal peptide therapeutic differed in upregulation of cytokines upon addition to PBMCs and pDCs. Peptide QR24 was evidently more effective in upregulation of pro-inflammatory cytokines, whereas GH17 significantly increased production of IL-10 through treated cells. Altogether, these data suggest a complexity of action of the liposomal peptide therapeutic that does not seem to involve simple helper T cells (Th-shift but rather the rebalancing of the immune system.

  12. Potential of the Galaxy from the Besançon galaxy model including non-axisymmetric components: Preliminary results

    Science.gov (United States)

    Fernández-Trincado, J. G.; Robin, A. C.; Bienaymé, O.; Reylé, C.; Valenzuela, O.; Pichardo, B.

    2014-07-01

    In this contributed poster we present a preliminary attempt to compute a non-axisymmetric potential together with previous axisymmetric potential of the Besançon galaxy model. The contribution by non-axisymmetric components are modeled by the superposition of inhomogeneous ellipsoids to approximate the triaxial bar and superposition of homogeneous oblate spheroids for a stellar halo, possibly triaxial. Finally, we have computed the potential and force field for these non-axisymmetric components in order to constraint the total mass of the Milky Way. We present preliminary results for the rotation curve and the contribution of the bar to it. This approach will allow future studies of dynamical constraints from comparisons of kinematical simulations with upcoming surveys such as RAVE, BRAVA, APOGEE, and GAIA in the near future. More details, are presented in https://gaia.ub.edu/Twiki/pub/GREATITNFC/ProgramFinalconference/Poster_JG.Fern%e1ndez.pdf.

  13. Reconstructive Approach to an Acquired Absence of Multiple Facial Components: A Case Report.

    Science.gov (United States)

    Oliver, Lauren N; Chaiyasate, Kongkrit

    2016-10-01

    The subject of our case report is a young girl who was attacked by a raccoon when she was 5 months old. She lost the majority of her nose, her entire right ear, and part of her upper lip. She had previous attempts at reconstructive surgery with poor results. Our collective goals were to provide lifelong reconstruction without the use of synthetic implants and to organize the steps in a way that provided psychological benefit early on while allowing her to continue education and childhood activities with minimal disruptions. We approached the patient's many problems in stages by starting with the most obvious deformity and progressing to the least severe deformity. A radial forearm free flap and a forehead flap with rib cartilage were used in stages for nasal reconstruction. An Abbé flap was utilized for lip reconstruction, and a prelaminated radial forearm free flap with a costal cartilage frame was selected to form a new ear. She had neither lasting complications nor any morbidity from her donor sites. She and her family report a drastic improvement in her self-confidence and in her interactions with her peers. A stepwise approach to reconstruction of acquired absence of multiple facial components achieves the benefit of early positive psychological results with necessary breaks from surgery to allow her normal childhood activities and education. Judicious utilization of free flaps negates the need of synthetic implants for lifelong reconstruction.

  14. Analysis of multiple components involved in the interaction between Cryptococcus neoformans and Acanthamoeba castellanii.

    Science.gov (United States)

    Rizzo, Juliana; Albuquerque, Priscila C; Wolf, Julie M; Nascimento, Renata; Pereira, Marcos D; Nosanchuk, Joshua D; Rodrigues, Marcio L

    Cryptococcus neoformans is an environmental fungus that can cause lethal meningoencephalitis in immunocompromised individuals. The mechanisms by which environmental microbes become pathogenic to mammals are still obscure, but different studies suggest that fungal virulence evolved from selection imposed by environmental predators. The soil-living Acanthamoeba castellanii is a well-known predator of C. neoformans. In this work, we evaluated the participation of C. neoformans virulence-associated structures in the interaction of fungal cells with A. castellanii. Fungal extracellular vesicles (EVs) and the polysaccharide glucuronoxylomannan (GXM) were internalized by A. castellanii with no impact on the viability of amoebal cells. EVs, but not free GXM, modulated antifungal properties of A. castellanii by inducing enhanced yeast survival. Phagocytosis of C. neoformans by amoebal cells and the pathogenic potential in a Galleria mellonella model were not affected by EVs, but previous interactions with A. castellanii rendered fungal cells more efficient in killing this invertebrate host. This observation was apparently associated with marked amoeba-induced changes in surface architecture and increased resistance to both oxygen- and nitrogen-derived molecular species. Our results indicate that multiple components with the potential to impact pathogenesis are involved in C. neoformans environmental interactions. Copyright © 2017 British Mycological Society. Published by Elsevier Ltd. All rights reserved.

  15. Multiple time-scale optimization scheduling for islanded microgrids including PV, wind turbine, diesel generator and batteries

    DEFF Research Database (Denmark)

    Xiao, Zhao xia; Nan, Jiakai; Guerrero, Josep M.

    2017-01-01

    the adjustment of the day-ahead scheduling and giving priority to the use of renewable energy. According to the forecast of the critical and noncritical load, the wind speed, and the solar irradiation, mixed integer linear programming (MILP) optimization method is used to solve the multi-objective optimization......A multiple time-scale optimization scheduling including day ahead and short time for an islanded microgrid is presented. In this paper, the microgrid under study includes photovoltaics (PV), wind turbine (WT), diesel generator (DG), batteries, and shiftable loads. The study considers the maximum...... efficiency operation area for the diesel engine and the cost of the battery charge/discharge cycle losses. The day-ahead generation scheduling takes into account the minimum operational cost and the maximum load satisfaction as the objective function. Short-term optimal dispatch is based on minimizing...

  16. An analysis of dietary fiber and fecal fiber components including pH in rural Africans with colorectal cancer.

    Science.gov (United States)

    Faruk, Mohammed; Ibrahim, Sani; Adamu, Ahmed; Rafindadi, Abdulmumini Hassan; Ukwenya, Yahaya; Iliyasu, Yawale; Adamu, Abdullahi; Aminu, Surajo Mohammed; Shehu, Mohammed Sani; Ameh, Danladi Amodu; Mohammed, Abdullahi; Ahmed, Saad Aliyu; Idoko, John; Ntekim, Atara; Suleiman, Aishatu Maude; Shah, Khalid Zahir; Adoke, Kasimu Umar

    2018-01-01

    Colorectal cancer (CRC) is now a major public health problem with heavy morbidity and mortality in rural Africans despite the lingering dietary fiber-rich foodstuffs consumption. Studies have shown that increased intake of dietary fiber which contribute to low fecal pH and also influences the activity of intestinal microbiota, is associated with a lowered risk for CRC. However, whether or not the apparent high dietary fiber consumption by Africans do not longer protects against CRC risk is unknown. This study evaluated dietary fiber intake, fecal fiber components and pH levels in CRC patients. Thirty-five subjects (CRC=21, control=14), mean age 45 years were recruited for the study. A truncated food frequency questionnaire and modified Goering and Van Soest procedures were used. We found that all subjects consumed variety of dietary fiber-rich foodstuffs. There is slight preponderance in consumption of dietary fiber by the control group than the CRC patients. We also found a significant difference in the mean fecal neutral detergent fiber, acid detergent fiber, hemicellulose, cellulose and lignin contents from the CRC patients compared to the controls ( P fiber components and stool pH levels between the 2 groups may relate to CRC incidence and mortality in rural Africans. There is crucial need for more hypothesis-driven research with adequate funding on the cumulative preventive role of dietary fiber-rich foodstuffs against colorectal cancer in rural Africans "today."

  17. Synthesis and Sintering Behavior of Cordierite Prepared from Multi-Component Materials Including Alkaline-Earth Minerals

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Suk-In; Kim, Nam-Il; Lee, Sang-Jin [Mokpo National University, Muan (Korea, Republic of)

    2016-10-15

    Cordierite was synthesized using multi-component materials based on a talc-alumina-clay system. The cordierite sintered at 1360 °C showed a high relative density of 98.8% and a low thermal expansion coefficient of 1.59×10{sup -}6/°C. To study the effect of adding alkaline-earth minerals on the cordierite properties, petalite, potash-feldspar, and dicalcium phosphate were added to the synthesized cordierite. In the case of 9 wt% petalite or potash-feldspar addition, the cordierite was more densified; however, the thermal expansion coefficient and the pyroplasticity index were increased. In particular, a 5 μm thick self-glazed coating was formed with the addition of 9 wt% potash-feldspar. In the case of adding dicalcium phosphate, a glass phase was formed at low temperature and gas bubbles formed at high temperature above 1320 ℃. The cordierite synthesized using multi-component materials is expected to be employed as a material for high thermal shock, dense-microstructure flameware.

  18. Vulnerability assessment including tangible and intangible components in the index composition: An Amazon case study of flooding and flash flooding.

    Science.gov (United States)

    Andrade, Milena Marília Nogueira de; Szlafsztein, Claudio Fabian

    2018-02-27

    The vulnerability of cities and communities in the Amazon to flooding and flash flooding is increasing. The effects of extreme events on populations vary across landscapes, causing vulnerability to differ spatially. Traditional vulnerability studies in Brazil and across the world have used the vulnerability index for the country and, more recently, municipality scales. The vulnerability dimensions are exposure, sensitivity, and adaptive capacity. For each of these dimensions, there is a group of indicators that constitutes a vulnerability index using quantitative data. Several vulnerability assessments have used sensitivity and exposure analyses and, recently, adaptive capacity has been considered. The Geographical Information Systems (GIS) analysis allows spatial regional modeling using quantitative vulnerability indicators. This paper presents a local-scale vulnerability assessment in an urban Amazonian area, Santarém City, using interdisciplinary methods. Data for exposure and sensitivity were gathered by remote sensing and census data, respectively. However, adaptive capacity refers to local capacities, whether infrastructural or not, and the latter were gathered by qualitative participatory methods. For the mixed data used to study adaptive capacity, we consider tangible components for countable infrastructure that can cope with hazards, and intangible components that reflect social activities based on risk perceptions and collective action. The results indicate that over 80% of the area is highly or moderately vulnerable to flooding and flash flooding. Exposure and adaptive capacity were determinants of the results. Lower values of adaptive capacity play a significant role in vulnerability enhancement. Copyright © 2018 Elsevier B.V. All rights reserved.

  19. An analysis of dietary fiber and fecal fiber components including pH in rural Africans with colorectal cancer

    Directory of Open Access Journals (Sweden)

    Mohammed Faruk

    2018-01-01

    Full Text Available Background/Aims: Colorectal cancer (CRC is now a major public health problem with heavy morbidity and mortality in rural Africans despite the lingering dietary fiber-rich foodstuffs consumption. Studies have shown that increased intake of dietary fiber which contribute to low fecal pH and also influences the activity of intestinal microbiota, is associated with a lowered risk for CRC. However, whether or not the apparent high dietary fiber consumption by Africans do not longer protects against CRC risk is unknown. This study evaluated dietary fiber intake, fecal fiber components and pH levels in CRC patients. Methods: Thirty-five subjects (CRC=21, control=14, mean age 45 years were recruited for the study. A truncated food frequency questionnaire and modified Goering and Van Soest procedures were used. Results: We found that all subjects consumed variety of dietary fiber-rich foodstuffs. There is slight preponderance in consumption of dietary fiber by the control group than the CRC patients. We also found a significant difference in the mean fecal neutral detergent fiber, acid detergent fiber, hemicellulose, cellulose and lignin contents from the CRC patients compared to the controls (P<0.05. The CRC patients had significantly more fecal pH level than the matched apparently healthy controls (P=0.017. Conclusions: The identified differences in the fecal fiber components and stool pH levels between the 2 groups may relate to CRC incidence and mortality in rural Africans. There is crucial need for more hypothesis-driven research with adequate funding on the cumulative preventive role of dietary fiber-rich foodstuffs against colorectal cancer in rural Africans “today.”

  20. Background, design and conceptual model of the cluster randomized multiple-component workplace study

    DEFF Research Database (Denmark)

    Christensen, Jeanette Reffstrup; Bredahl, Thomas Viskum Gjelstrup; Hadrévi, Jenny

    2016-01-01

    Occupational Muscle pain) WHP program among health care workers. A job group characterized by having high physical work demands, musculoskeletal disorders, high sickness presenteeism - and absenteeism. METHODS: FRIDOM aimed to reduce neck and shoulder pain. Secondary aims were to decrease sickness presenteeism......, sickness absenteeism and lifestyle-diseases such as other musculoskeletal disorders as well as metabolic-, and cardiovascular disorders - and to maintain participation to regular physical exercise training, after a one year intervention period. The entire concept was tailored to a population of female...... health care workers. This was done through a multi-component intervention including 1) intelligent physical exercise training (IPET), dietary advice and weight loss (DAW) and cognitive behavioural training (CBT). DISCUSSION: The FRIDOM program has the potential to provide evidence-based knowledge...

  1. A service component-based accounting and charging architecture to support interim mechanisms across multiple domains

    NARCIS (Netherlands)

    Le, M. van; Beijnum, B.J.F. van; Huitema, G.B.

    2004-01-01

    Today, telematics services are often compositions of different chargeable service components offered by different service providers. To enhance component-based accounting and charging, the service composition information is used to match with the corresponding charging structure of a service

  2. Compound K, a Ginsenoside Metabolite, Inhibits Colon Cancer Growth via Multiple Pathways Including p53-p21 Interactions

    Directory of Open Access Journals (Sweden)

    Eugene B. Chang

    2013-01-01

    Full Text Available Compound K (20-O-beta-D-glucopyranosyl-20(S-protopanaxadiol, CK, an intestinal bacterial metabolite of ginseng protopanaxadiol saponins, has been shown to inhibit cell growth in a variety of cancers. However, the mechanisms are not completely understood, especially in colorectal cancer (CRC. A xenograft tumor model was used first to examine the anti-CRC effect of CK in vivo. Then, multiple in vitro assays were applied to investigate the anticancer effects of CK including antiproliferation, apoptosis and cell cycle distribution. In addition, a qPCR array and western blot analysis were executed to screen and validate the molecules and pathways involved. We observed that CK significantly inhibited the growth of HCT-116 tumors in an athymic nude mouse xenograft model. CK significantly inhibited the proliferation of human CRC cell lines HCT-116, SW-480, and HT-29 in a dose- and time-dependent manner. We also observed that CK induced cell apoptosis and arrested the cell cycle in the G1 phase in HCT-116 cells. The processes were related to the upregulation of p53/p21, FoxO3a-p27/p15 and Smad3, and downregulation of cdc25A, CDK4/6 and cyclin D1/3. The major regulated targets of CK were cyclin dependent inhibitors, including p21, p27, and p15. These results indicate that CK inhibits transcriptional activation of multiple tumor-promoting pathways in CRC, suggesting that CK could be an active compound in the prevention or treatment of CRC.

  3. Experimental evaluation of an adaptive Joule-Thomson cooling system including silicon-microfabricated heat exchanger and microvalve components.

    Science.gov (United States)

    Zhu, Weibin; Park, Jong M; White, Michael J; Nellis, Gregory F; Gianchandani, Yogesh B

    2011-03-01

    This article reports the evaluation of a Joule-Thomson (JT) cooling system that combines two custom micromachined components-a Si/glass-stack recuperative heat exchanger and a piezoelectrically actuated expansion microvalve. With the microvalve controlling the flow rate, this system can modulate cooling to accommodate varying refrigeration loads. The perforated plate Si/glass heat exchanger is fabricated with a stack of alternating silicon plates and Pyrex glass spacers. The microvalve utilizes a lead zirconate titanate actuator to push a Si micromachined valve seat against a glass plate, thus modulating the flow passing through the gap between the valve seat and the glass plate. The fabricated heat exchanger has a footprint of 1 × 1 cm(2) and a length of 35 mm. The size of the micromachined piezoelectrically actuated valve is about 1 × 1 × 1 cm(3). In JT cooling tests, the temperature of the system was successfully controlled by adjusting the input voltage of the microvalve. When the valve was fully opened (at an input voltage of -30 V), the system cooled down to a temperature as low as 254.5 K at 430 kPa pressure difference between inlet and outlet at steady state and 234 K at 710 kPa in a transient state. The system provided cooling powers of 75 mW at 255 K and 150 mW at 258 K. Parasitic heat loads at 255 K are estimated at approximately 700 mW.

  4. Nonlinear flow model of multiple fractured horizontal wells with stimulated reservoir volume including the quadratic gradient term

    Science.gov (United States)

    Ren, Junjie; Guo, Ping

    2017-11-01

    The real fluid flow in porous media is consistent with the mass conservation which can be described by the nonlinear governing equation including the quadratic gradient term (QGT). However, most of the flow models have been established by ignoring the QGT and little work has been conducted to incorporate the QGT into the flow model of the multiple fractured horizontal (MFH) well with stimulated reservoir volume (SRV). This paper first establishes a semi-analytical model of an MFH well with SRV including the QGT. Introducing the transformed pressure and flow-rate function, the nonlinear model of a point source in a composite system including the QGT is linearized. Then the Laplace transform, principle of superposition, numerical discrete method, Gaussian elimination method and Stehfest numerical inversion are employed to establish and solve the seepage model of the MFH well with SRV. Type curves are plotted and the effects of relevant parameters are analyzed. It is found that the nonlinear effect caused by the QGT can increase the flow capacity of fluid flow and influence the transient pressure positively. The relevant parameters not only have an effect on the type curve but also affect the error in the pressure calculated by the conventional linear model. The proposed model, which is consistent with the mass conservation, reflects the nonlinear process of the real fluid flow, and thus it can be used to obtain more accurate transient pressure of an MFH well with SRV.

  5. Complete blood count risk score and its components, including RDW, are associated with mortality in the JUPITER trial.

    Science.gov (United States)

    Horne, Benjamin D; Anderson, Jeffrey L; Muhlestein, Joseph B; Ridker, Paul M; Paynter, Nina P

    2015-04-01

    Previously, we showed that sex-specific complete blood count (CBC) risk scores strongly predicted risk of all-cause mortality in multiple sets of general medical patients. This study evaluated the CBC risk score in an independent, well-studied international primary risk population of lower-risk individuals initially free from cardiovascular (CV) disease. Observational secondary analysis of a randomized trial population. The previously derived and validated CBC score was evaluated for association with all-cause mortality among CV disease-free females (n = 6568) and males (n = 10,629) enrolled for up to 5 years in the Justification for the Use of Statins in Prevention: an Intervention Trial Evaluating Rosuvastatin (JUPITER) trial. Associations of the CBC score with CV mortality and with major CV disease were also tested. The CBC score predicted all-cause mortality, with univariable hazard ratio (HR) 4.83 (95% CI 3.70-6.31) for the third CBC score tertile vs. the first tertile, and HR 2.31 (CI 1.75-3.05) for the second tertile (p trend JUPITER endpoint (p trend = 0.015). c-statistics for mortality were 0.729 among all, and 0.722 and 0.750 for females and males, respectively. The CBC risk score was strongly associated with all-cause mortality among JUPITER trial participants and had good discrimination. It also predicted CV-specific outcomes. This CBC score may be useful in identifying cardiac disease-free individuals at increased risk of mortality. © The European Society of Cardiology 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  6. Phenotypic Suppression of Streptomycin Resistance by Mutations in Multiple Components of the Translation Apparatus.

    Science.gov (United States)

    Carr, Jennifer F; Lee, Hannah J; Jaspers, Joshua B; Dahlberg, Albert E; Jogl, Gerwald; Gregory, Steven T

    2015-09-01

    The bacterial ribosome and its associated translation factors are frequent targets of antibiotics, and antibiotic resistance mutations have been found in a number of these components. Such mutations can potentially interact with one another in unpredictable ways, including the phenotypic suppression of one mutation by another. These phenotypic interactions can provide evidence of long-range functional interactions throughout the ribosome and its functional complexes and potentially give insights into antibiotic resistance mechanisms. In this study, we used genetics and experimental evolution of the thermophilic bacterium Thermus thermophilus to examine the ability of mutations in various components of the protein synthesis apparatus to suppress the streptomycin resistance phenotypes of mutations in ribosomal protein S12, specifically those located distant from the streptomycin binding site. With genetic selections and strain constructions, we identified suppressor mutations in EF-Tu or in ribosomal protein L11. Using experimental evolution, we identified amino acid substitutions in EF-Tu or in ribosomal proteins S4, S5, L14, or L19, some of which were found to also relieve streptomycin resistance. The wide dispersal of these mutations is consistent with long-range functional interactions among components of the translational machinery and indicates that streptomycin resistance can result from the modulation of long-range conformational signals. The thermophilic bacterium Thermus thermophilus has become a model system for high-resolution structural studies of macromolecular complexes, such as the ribosome, while its natural competence for transformation facilitates genetic approaches. Genetic studies of T. thermophilus ribosomes can take advantage of existing high-resolution crystallographic information to allow a structural interpretation of phenotypic interactions among mutations. Using a combination of genetic selections, strain constructions, and experimental

  7. THE COMPOSITION OF THE INTERIOR OF COMET 73P/SCHWASSMANN-WACHMANN 3: RESULTS FROM NARROWBAND PHOTOMETRY OF MULTIPLE COMPONENTS

    International Nuclear Information System (INIS)

    Schleicher, David G.; Bair, Allison N.

    2011-01-01

    We present analyses of and results for multiple components of Comet 73P/Schwassmann-Wachmann 3 at two apparitions. A total of eight nights of narrowband photometry were obtained during the comet's 2006 apparition from February 25 to September 24 at Lowell Observatory. The comet's very close passage of Earth and sporadic outbursts allowed us to successfully measure the primary body, 'C', as well as components 'B', 'G', and 'R'. We additionally include four nights of narrowband photometry from 1995, obtained at Perth Observatory between October 19 and November 21, one to two months after the initial fragmentation event and outburst. We determined production rates for OH, NH, CN, C 3 , and C 2 , along with a proxy for the dust production, A(θ)fρ, and our 2006 measurements show considerable variation in behavior among the components, and for the gas species as compared to the dust grains. The two components having the best temporal coverage, C and B, both exhibit evidence for strong seasonal effects with larger production rates prior to perihelion than after. Because C showed little or no evidence of outbursts, its derived active area (based on water production rates) appears to be dominated by ice vaporizing from the nucleus; the fractional active area of the total nucleus surface varied from 56% (2006 February) to 125% (May) and back down to 11% (September) following perihelion. Except for when Component B was in outburst, C always had higher production rates than B, implying a significantly larger effective active area on its nucleus' surface. Unlike the gas species, dust production showed large and varying trends with both aperture size and with time, implying a significant change in the properties of the dust grains during the 2006 apparition. Due to the fragmentation event in 1995, the majority of active surfaces on the various components observed in 2006 are freshly exposed from the interior of Schwassmann-Wachmann 3's nucleus, thus permitting us to directly

  8. Applicability of bioanalysis of multiple analytes in drug discovery and development: review of select case studies including assay development considerations.

    Science.gov (United States)

    Srinivas, Nuggehally R

    2006-05-01

    The development of sound bioanalytical method(s) is of paramount importance during the process of drug discovery and development culminating in a marketing approval. Although the bioanalytical procedure(s) originally developed during the discovery stage may not necessarily be fit to support the drug development scenario, they may be suitably modified and validated, as deemed necessary. Several reviews have appeared over the years describing analytical approaches including various techniques, detection systems, automation tools that are available for an effective separation, enhanced selectivity and sensitivity for quantitation of many analytes. The intention of this review is to cover various key areas where analytical method development becomes necessary during different stages of drug discovery research and development process. The key areas covered in this article with relevant case studies include: (a) simultaneous assay for parent compound and metabolites that are purported to display pharmacological activity; (b) bioanalytical procedures for determination of multiple drugs in combating a disease; (c) analytical measurement of chirality aspects in the pharmacokinetics, metabolism and biotransformation investigations; (d) drug monitoring for therapeutic benefits and/or occupational hazard; (e) analysis of drugs from complex and/or less frequently used matrices; (f) analytical determination during in vitro experiments (metabolism and permeability related) and in situ intestinal perfusion experiments; (g) determination of a major metabolite as a surrogate for the parent molecule; (h) analytical approaches for universal determination of CYP450 probe substrates and metabolites; (i) analytical applicability to prodrug evaluations-simultaneous determination of prodrug, parent and metabolites; (j) quantitative determination of parent compound and/or phase II metabolite(s) via direct or indirect approaches; (k) applicability in analysis of multiple compounds in select

  9. Estimation of Genetic Variance Components Including Mutation and Epistasis using Bayesian Approach in a Selection Experiment on Body Weight in Mice

    DEFF Research Database (Denmark)

    Widyas, Nuzul; Jensen, Just; Nielsen, Vivi Hunnicke

    selected downwards and three lines were kept as controls. Bayesian statistical methods are used to estimate the genetic variance components. Mixed model analysis is modified including mutation effect following the methods by Wray (1990). DIC was used to compare the model. Models including mutation effect...

  10. An Evaluation of a Three-Component Multiple Schedule to Indicate Attention Availability

    Science.gov (United States)

    Nava, Maria J.; Vargo, Kristina K.; Babino, Misti M.

    2016-01-01

    Students may engage in high rates of social approach responses at inappropriate times throughout the school day. One intervention that has been used to teach students appropriate and inappropriate times to access attention is a multiple schedule of reinforcement. In this study, we evaluated the efficacy of a multiple schedule that indicated when…

  11. A Service Component-based Accounting and Charging Architecture to Support Interim Mechanisms across Multiple Domains

    NARCIS (Netherlands)

    Le, V.M.; van Beijnum, Bernhard J.F.; Huitema, G.B.

    Today, telematics services are o Aen compositions of different chargeable service components offered by different service providers. To enhance component-based accounting and charging, the service composition information is used to match with the corresponding charging structure of a service

  12. Klotho: a humeral mediator in CSF and plasma that influences longevity and susceptibility to multiple complex disorders, including depression.

    Science.gov (United States)

    Pavlatou, M G; Remaley, A T; Gold, P W

    2016-08-30

    Klotho is a hormone secreted into human cerebrospinal fluid (CSF), plasma and urine that promotes longevity and influences the onset of several premature senescent phenotypes in mice and humans, including atherosclerosis, cardiovascular disease, stroke and osteoporosis. Preliminary studies also suggest that Klotho possesses tumor suppressor properties. Klotho's roles in these phenomena were first suggested by studies demonstrating that a defect in the Klotho gene in mice results in a significant decrease in lifespan. The Klotho-deficient mouse dies prematurely at 8-9 weeks of age. At 4-5 weeks of age, a syndrome resembling human ageing emerges consisting of atherosclerosis, osteoporosis, cognitive disturbances and alterations of hippocampal architecture. Several deficits in Klotho-deficient mice are likely to contribute to these phenomena. These include an inability to defend against oxidative stress in the central nervous system and periphery, decreased capacity to generate nitric oxide to sustain normal endothelial reactivity, defective Klotho-related mediation of glycosylation and ion channel regulation, increased insulin/insulin-like growth factor signaling and a disturbed calcium and phosphate homeostasis accompanied by altered vitamin D levels and ectopic calcification. Identifying the mechanisms by which Klotho influences multiple important pathways is an emerging field in human biology that will contribute significantly to understanding basic physiologic processes and targets for the treatment of complex diseases. Because many of the phenomena seen in Klotho-deficient mice occur in depressive illness, major depression and bipolar disorder represent illnesses potentially associated with Klotho dysregulation. Klotho's presence in CSF, blood and urine should facilitate its study in clinical populations.

  13. Robust Grape Cluster Detection in a Vineyard by Combining the AdaBoost Framework and Multiple Color Components

    Science.gov (United States)

    Luo, Lufeng; Tang, Yunchao; Zou, Xiangjun; Wang, Chenglin; Zhang, Po; Feng, Wenxian

    2016-01-01

    The automatic fruit detection and precision picking in unstructured environments was always a difficult and frontline problem in the harvesting robots field. To realize the accurate identification of grape clusters in a vineyard, an approach for the automatic detection of ripe grape by combining the AdaBoost framework and multiple color components was developed by using a simple vision sensor. This approach mainly included three steps: (1) the dataset of classifier training samples was obtained by capturing the images from grape planting scenes using a color digital camera, extracting the effective color components for grape clusters, and then constructing the corresponding linear classification models using the threshold method; (2) based on these linear models and the dataset, a strong classifier was constructed by using the AdaBoost framework; and (3) all the pixels of the captured images were classified by the strong classifier, the noise was eliminated by the region threshold method and morphological filtering, and the grape clusters were finally marked using the enclosing rectangle method. Nine hundred testing samples were used to verify the constructed strong classifier, and the classification accuracy reached up to 96.56%, higher than other linear classification models. Moreover, 200 images captured under three different illuminations in the vineyard were selected as the testing images on which the proposed approach was applied, and the average detection rate was as high as 93.74%. The experimental results show that the approach can partly restrain the influence of the complex background such as the weather condition, leaves and changing illumination. PMID:27973409

  14. Robust Grape Cluster Detection in a Vineyard by Combining the AdaBoost Framework and Multiple Color Components

    Directory of Open Access Journals (Sweden)

    Lufeng Luo

    2016-12-01

    Full Text Available The automatic fruit detection and precision picking in unstructured environments was always a difficult and frontline problem in the harvesting robots field. To realize the accurate identification of grape clusters in a vineyard, an approach for the automatic detection of ripe grape by combining the AdaBoost framework and multiple color components was developed by using a simple vision sensor. This approach mainly included three steps: (1 the dataset of classifier training samples was obtained by capturing the images from grape planting scenes using a color digital camera, extracting the effective color components for grape clusters, and then constructing the corresponding linear classification models using the threshold method; (2 based on these linear models and the dataset, a strong classifier was constructed by using the AdaBoost framework; and (3 all the pixels of the captured images were classified by the strong classifier, the noise was eliminated by the region threshold method and morphological filtering, and the grape clusters were finally marked using the enclosing rectangle method. Nine hundred testing samples were used to verify the constructed strong classifier, and the classification accuracy reached up to 96.56%, higher than other linear classification models. Moreover, 200 images captured under three different illuminations in the vineyard were selected as the testing images on which the proposed approach was applied, and the average detection rate was as high as 93.74%. The experimental results show that the approach can partly restrain the influence of the complex background such as the weather condition, leaves and changing illumination.

  15. Measuring kinetic rate constants of multiple-component reactions with optical biosensors.

    Science.gov (United States)

    Edwards, David A; Evans, Ryan M; Li, Wenbin

    2017-09-15

    One may measure the kinetic rate constants associated with biochemical reactions using an optical biosensor: an instrument in which ligand molecules are convected through a flow cell over a surface to which receptors are immobilized. If there are multiple reactants, one is faced with the problem of fitting multiple kinetic rate constants to one signal, since data from all of the reacting species is lumped together. Even in the presence of ambiguous data, one may use a series of experiments to accurately determine the rate constants. Moreover, the true set of rate constants may be identified by either postprocessing the signals or adjusting the ligand inflow concentrations. Published by Elsevier Inc.

  16. Multiple Criteria Evaluation of Quality and Optimisation of e-Learning System Components

    Science.gov (United States)

    Kurilovas, Eugenijus; Dagiene, Valentina

    2010-01-01

    The main research object of the paper is investigation and proposal of the comprehensive Learning Object Repositories (LORs) quality evaluation tool suitable for their multiple criteria decision analysis, evaluation and optimisation. Both LORs "internal quality" and "quality in use" evaluation (decision making) criteria are analysed in the paper.…

  17. 21 CFR 888.3030 - Single/multiple component metallic bone fixation appliances and accessories.

    Science.gov (United States)

    2010-04-01

    ...-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners... implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a... involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force...

  18. Auxiliary variables in multiple imputation in regression with missing X: a warning against including too many in small sample research

    Directory of Open Access Journals (Sweden)

    Hardt Jochen

    2012-12-01

    Full Text Available Abstract Background Multiple imputation is becoming increasingly popular. Theoretical considerations as well as simulation studies have shown that the inclusion of auxiliary variables is generally of benefit. Methods A simulation study of a linear regression with a response Y and two predictors X1 and X2 was performed on data with n = 50, 100 and 200 using complete cases or multiple imputation with 0, 10, 20, 40 and 80 auxiliary variables. Mechanisms of missingness were either 100% MCAR or 50% MAR + 50% MCAR. Auxiliary variables had low (r=.10 vs. moderate correlations (r=.50 with X’s and Y. Results The inclusion of auxiliary variables can improve a multiple imputation model. However, inclusion of too many variables leads to downward bias of regression coefficients and decreases precision. When the correlations are low, inclusion of auxiliary variables is not useful. Conclusion More research on auxiliary variables in multiple imputation should be performed. A preliminary rule of thumb could be that the ratio of variables to cases with complete data should not go below 1 : 3.

  19. iStimulation: Apple iPad Use with Children Who Are Visually Impaired, Including Those with Multiple Disabilities

    Science.gov (United States)

    Campaña, Laura V.; Ouimet, Donald A.

    2015-01-01

    Since its creation in the early 1980s, Light Box, a product developed by the American Printing House for the Blind (APH) that is designed for working on functional vision tasks with children who have visual impairments or multiple disabilities, has been an effective tool to help teach children with visual impairments to locate and track items…

  20. Simultaneous and rapid determination of multiple component concentrations in a Kraft liquor process stream

    Science.gov (United States)

    Li, Jian [Marietta, GA; Chai, Xin Sheng [Atlanta, GA; Zhu, Junyoung [Marietta, GA

    2008-06-24

    The present invention is a rapid method of determining the concentration of the major components in a chemical stream. The present invention is also a simple, low cost, device of determining the in-situ concentration of the major components in a chemical stream. In particular, the present invention provides a useful method for simultaneously determining the concentrations of sodium hydroxide, sodium sulfide and sodium carbonate in aqueous kraft pulping liquors through use of an attenuated total reflectance (ATR) tunnel flow cell or optical probe capable of producing a ultraviolet absorbency spectrum over a wavelength of 190 to 300 nm. In addition, the present invention eliminates the need for manual sampling and dilution previously required to generate analyzable samples. The inventive method can be used in Kraft pulping operations to control white liquor causticizing efficiency, sulfate reduction efficiency in green liquor, oxidation efficiency for oxidized white liquor and the active and effective alkali charge to kraft pulping operations.

  1. Broadly tunable mid-infrared VECSEL for multiple components hydrocarbon gas sensing

    Science.gov (United States)

    Rey, J. M.; Fill, M.; Felder, F.; Sigrist, M. W.

    2014-12-01

    A new sensing platform to simultaneously identify and quantify volatile C1 to C4 alkanes in multi-component gas mixtures is presented. This setup is based on an optically pumped, broadly tunable mid-infrared vertical-external-cavity surface-emitting laser (VECSEL) developed for gas detection. The lead-chalcogenide VECSEL is the key component of the presented optical sensor. The potential of the proposed sensing setup is illustrated by experimental absorption spectra obtained from various mixtures of volatile hydrocarbons and water vapor. The sensor has a sub-ppm limit of detection for each targeted alkane in a hydrocarbon gas mixture even in the presence of a high water vapor content.

  2. Quantifying components of the hydrologic cycle in Virginia using chemical hydrograph separation and multiple regression analysis

    Science.gov (United States)

    Sanford, Ward E.; Nelms, David L.; Pope, Jason P.; Selnick, David L.

    2012-01-01

    This study by the U.S. Geological Survey, prepared in cooperation with the Virginia Department of Environmental Quality, quantifies the components of the hydrologic cycle across the Commonwealth of Virginia. Long-term, mean fluxes were calculated for precipitation, surface runoff, infiltration, total evapotranspiration (ET), riparian ET, recharge, base flow (or groundwater discharge) and net total outflow. Fluxes of these components were first estimated on a number of real-time-gaged watersheds across Virginia. Specific conductance was used to distinguish and separate surface runoff from base flow. Specific-conductance data were collected every 15 minutes at 75 real-time gages for approximately 18 months between March 2007 and August 2008. Precipitation was estimated for 1971–2000 using PRISM climate data. Precipitation and temperature from the PRISM data were used to develop a regression-based relation to estimate total ET. The proportion of watershed precipitation that becomes surface runoff was related to physiographic province and rock type in a runoff regression equation. Component flux estimates from the watersheds were transferred to flux estimates for counties and independent cities using the ET and runoff regression equations. Only 48 of the 75 watersheds yielded sufficient data, and data from these 48 were used in the final runoff regression equation. The base-flow proportion for the 48 watersheds averaged 72 percent using specific conductance, a value that was substantially higher than the 61 percent average calculated using a graphical-separation technique (the USGS program PART). Final results for the study are presented as component flux estimates for all counties and independent cities in Virginia.

  3. Effects of multiple inhibitory components on anaerobic treatment processes in municipal solid waste incineration leachate.

    Science.gov (United States)

    Lei, Yuqing; Dang, Yan; Lan, Zhangheng; Sun, Dezhi

    2016-06-01

    This study served to investigate the comparative and combined effects of calcium, ammonia nitrogen, and aquatic humic substances (AHS) on specific methanogenic activity (SMA) in municipal solid waste leachate at mesophilic conditions. Using orthogonal experiments, anaerobic granular sludge was cultured with different concentrations combinations of the three added components for 13 days. The combination of 6000 mg/L calcium, 400 mg/L ammonia nitrogen, and 4000 mg/L AHS was the most inhibitory combination on the SMA of granular sludge, with a calculated 4.49 mL (standard temperature and atmospheric pressure) (STP) CH4/(gVSS·d) of SMA. The SMA with the addition of the inhibitory components was much lower than the control group's (1000 mg/L calcium, 200 mg/L ammonia nitrogen and 2000 mg/L AHS) with a calculated 12.97 mL (STP) CH4/(gVSS·d) of SMA. Calcium was the major inhibitor among the three components followed by AHS. High concentrations of calcium significantly inhibited the utilization of propionate and butyrate in the substrate and further affected the methanogenic process.

  4. Nontypeable pneumococci can be divided into multiple cps types, including one type expressing the novel gene pspK.

    Science.gov (United States)

    Park, In Ho; Kim, Kyung-Hyo; Andrade, Ana Lucia; Briles, David E; McDaniel, Larry S; Nahm, Moon H

    2012-01-01

    Although virulence of Streptococcus pneumoniae is associated with its capsule, some pathogenic S. pneumoniae isolates lack capsules and are serologically nontypeable (NT). We obtained 64 isolates that were identified as NT "pneumococci" (i.e., bacteria satisfying the conventional definition but without the multilocus sequence typing [MLST]-based definition of S. pneumoniae) by the traditional criteria. All 64 were optochin sensitive and had lytA, and 63 had ply. Twelve isolates had cpsA, suggesting the presence of a conventional but defective capsular polysaccharide synthesis (cps) locus. The 52 cpsA-negative isolates could be divided into three null capsule clades (NCC) based on aliC (aliB-like ORF1), aliD (aliB-like ORF2), and our newly discovered gene, pspK, in their cps loci. pspK encodes a protein with a long alpha-helical region containing an LPxTG motif and a YPT motif known to bind human pIgR. There were nine isolates in NCC1 (pspK(+) but negative for aliC and aliD), 32 isolates in NCC2 (aliC(+) aliD(+) but negative for pspK), and 11 in NCC3 (aliD(+) but negative for aliC and pspK). Among 52 cpsA-negative isolates, 41 were identified as S. pneumoniae by MLST analysis. All NCC1 and most NCC2 isolates were S. pneumoniae, whereas all nine NCC3 and two NCC2 isolates were not S. pneumoniae. Several NCC1 and NCC2 isolates from multiple individuals had identical MLST and cps regions, showing that unencapsulated S. pneumoniae can be infectious among humans. Furthermore, NCC1 and NCC2 S. pneumoniae isolates could colonize mice as well as encapsulated S. pneumoniae, although S. pneumoniae with an artificially disrupted cps locus did not. Moreover, an NCC1 isolate with pspK deletion did not colonize mice, suggesting that pspK is critical for colonization. Thus, PspK may provide pneumococci a means of surviving in the nasopharynx without capsule. IMPORTANCE The presence of a capsule is critical for many pathogenic bacteria, including pneumococci. Reflecting the

  5. Multiple schwannomas, including a plexiform variant, in a patient in the absence of neurofibromatosis I or II

    Directory of Open Access Journals (Sweden)

    Snehlata R Hingway

    2015-01-01

    Full Text Available Multiple schwannomatosis, is defined as two or more, pathologically proven schwannomas, without radiographic evidence of vestibular nerve tumor, below 18 years, or absence of VIII nerve dysfunction beyond 30 years with absence of stigmata of neurofibromatosis 2 (NF2. The plexiform schwannoma (PS is a rare tumor. The gross appearance is an important diagnostic criterion for diagnosis of PSs. It is associated with NF2, which was ruled out in this case. Here we present a 50 year female patient with two nonintradermal schwannomas, in the supraclavicular and infraauricular deep soft tissues. One was plexiform, diagnosed on cytology and confirmed by histopathology. She also had multiple pulmonary and pleural lesions. Fine needle aspiration cytology smears from both supraclavicular and infraauricular lesions as well as the lung lesion sampled, showed spindle cells in a myxoid background, having wavy nuclei with pointed ends. Verocay body - like palisading of nuclei was noted.

  6. Non-pharmacological self-management for people living with migraine or tension-type headache: a systematic review including analysis of intervention components

    Science.gov (United States)

    Bowers, Hannah; Mistry, Dipesh; Caldwell, Fiona; Underwood, Martin; Patel, Shilpa; Sandhu, Harbinder Kaur; Matharu, Manjit; Pincus, Tamar

    2017-01-01

    Objectives To assess the effect of non-pharmacological self-management interventions against usual care, and to explore different components and delivery methods within those interventions Participants People living with migraine and/or tension-type headache Interventions Non-pharmacological educational or psychological self-management interventions; excluding biofeedback and physical therapy. We assessed the overall effectiveness against usual care on headache frequency, pain intensity, mood, headache-related disability, quality of life and medication consumption in meta-analysis. We also provide preliminary evidence on the effectiveness of intervention components and delivery methods. Results We found a small overall effect for the superiority of self-management interventions over usual care, with a standardised mean difference (SMD) of −0.36 (−0.45 to −0.26) for pain intensity; −0.32 (−0.42 to −0.22) for headache-related disability, 0.32 (0.20 to 0.45) for quality of life and a moderate effect on mood (SMD=0.53 (−0.66 to −0.40)). We did not find an effect on headache frequency (SMD=−0.07 (−0.22 to 0.08)). Assessment of components and characteristics suggests a larger effect on pain intensity in interventions that included explicit educational components (−0.51 (−0.68 to −0.34) vs −0.28 (−0.40 to −0.16)); mindfulness components (−0.50 (−0.82 to −0.18) vs 0.34 (−0.44 to −0.24)) and in interventions delivered in groups vs one-to-one delivery (0.56 (−0.72 to −0.40) vs −0.39 (−0.52 to −0.27)) and larger effects on mood in interventions including a cognitive–behavioural therapy (CBT) component with an SMD of −0.72 (−0.93 to −0.51) compared with those without CBT −0.41 (−0.58 to −0.24). Conclusion Overall we found that self-management interventions for migraine and tension-type headache are more effective than usual care in reducing pain intensity, mood and headache-related disability, but have no

  7. Exposure to multiple components of a garden-based intervention for middle school students increases fruit and vegetable consumption.

    Science.gov (United States)

    Evans, Alexandra; Ranjit, Nalini; Rutledge, Ronda; Medina, Jose; Jennings, Rose; Smiley, Andrew; Stigler, Melissa; Hoelscher, Deanna

    2012-09-01

    (1) To measure the effects of different levels of exposure to a multiple-component garden-based intervention on middle school students' fruit and vegetable (F&V) consumption and related variables and (2) to determine the separate effects of each of the intervention components on F&V consumption. Unequal treatment-control posttest only. Five middle schools in ethnically diverse communities. Two hundred and forty-six adolescents (59% Hispanic; 70% low-income). Intervention. The Sprouting Healthy Kids intervention consists of six components: (1) in-class lessons, (2) after-school gardening program, (3) farm-to-school, (4) farmers' visits to schools, (5) taste testing, (6) field trips to farms. F&V consumption; motivation for eating F&V; self-efficacy for eating F&V; F&V preference; preference for unhealthy foods; knowledge. Linear regression models controlling for gender, ethnicity/race, and income. Compared with students who were exposed to less than two intervention components, students who were exposed to two or more components scored significantly higher on F&V intake, self-efficacy, and knowledge and lower on preference for unhealthy foods (p school and taste testing.

  8. Distributed cerebellar plasticity implements generalized multiple-scale memory components in real-robot sensorimotor tasks

    Directory of Open Access Journals (Sweden)

    Claudia eCasellato

    2015-02-01

    Full Text Available The cerebellum plays a crucial role in motor learning and it acts as a predictive controller. Modeling it and embedding it into sensorimotor tasks allows us to create functional links between plasticity mechanisms, neural circuits and behavioral learning. Moreover, if applied to real-time control of a neurorobot, the cerebellar model has to deal with a real noisy and changing environment, thus showing its robustness and effectiveness in learning. A biologically inspired cerebellar model with distributed plasticity, both at cortical and nuclear sites, has been used. Two cerebellum-mediated paradigms have been designed: an associative Pavlovian task and a vestibulo-ocular reflex, with multiple sessions of acquisition and extinction and with different stimuli and perturbation patterns. The cerebellar controller succeeded to generate conditioned responses and finely tuned eye movement compensation, thus reproducing human-like behaviors. Through a productive plasticity transfer from cortical to nuclear sites, the distributed cerebellar controller showed in both tasks the capability to optimize learning on multiple time-scales, to store motor memory and to effectively adapt to dynamic ranges of stimuli.

  9. A dynamic multiple reaction monitoring method for the multiple components quantification of complex traditional Chinese medicine preparations: Niuhuang Shangqing pill as an example.

    Science.gov (United States)

    Liang, Jian; Wu, Wan-ying; Sun, Guo-xiang; Wang, Dan-dan; Hou, Jin-jun; Yang, Wen-zhi; Jiang, Bao-hong; Liu, Xuan; Guo, De-an

    2013-06-14

    It is a challenging task to simultaneously and quantitatively analyze multiple components in DFF [Da-Fu-Fang, namely, complex traditional Chinese medicine (TCM) preparations containing more than ten TCMs] due to their numerous and extreme complex chemical compositions possessing a wide variety of chemical and physical features, and their very low content. Rather than using a conventional mass spectrometry (MS) method with multiple reaction monitoring (MRM), in the current study, this challenge was addressed by using dynamic multiple reaction monitoring (DMRM). Using a DFF, Niuhuang Shangqing pill, which is composed of 19 TCMs, as a model, a rapid (one run in 20min), sensitive [lower limit of detection (LOD) and limit of quantitation (LOQ) were achieved comparable with MRM] and accessible (a standard HPLC/MS/MS instrumentation was employed) MS method was successfully developed for the simultaneous quantification of 41 bioactive components which represented 15 of the 19 medicinal plants. A comparison of LOD and LOQ using MRM and DMRM was made to quantitatively reveal that the latter demonstrated advantages over the former. Meanwhile, a standard operating procedure concerning the development of a new DMRM method was recommended. The MS data were obtained in the positive ion mode with electrospray ionization as the ion source, acetonitrile and water as mobile phase and a Kinetex C18 core-shell column (100mm×2.10mm, 2.6μm, Phenomenex Inc.) as the analytical column. This method was then applied to 32 batches of samples. It transpired, through principal component analysis and orthogonal partial least squares discriminant analysis, that the consistency of the products was relatively good within one company, but poor among different companies among the 32 samples; one failed to qualify in terms of the Chinese Pharmacopeia. This work illustrated that the proposed DMRM method was particularly suitable for quantifying the trace components in DFF and capable of ensuring the

  10. Purification of Peptide Components including Melittin from Bee Venom using gel filtration chromatography and propionic acid/urea polyacrylamide gel electrophoresis

    Directory of Open Access Journals (Sweden)

    Young Chon Choi

    2006-06-01

    Full Text Available Objectives : This study was conducted to carry out Purification of Melittin and other peptide components from Bee Venom using gel filtration chromatography and propionic acid/urea polyacrylamide gel electrophoresis Methods : Melittin and other peptide components were separated from bee venom by using gel filtration chromatography on Sephadex G-50 column in 0.05M ammonium acetate buffer. Results : Melittin and other peptide components were separated from bee venom by using gel filtration chromatography on Sephadex G-50 column in 0.05M ammonium acetate buffer. The fractions obtained from gel filtration chromatography was analyzed by using SDS-PAGE and propionic acid/urea polyacrylamide gel electrophoresis. The melittin obtained from the gel filtration contained residual amount of phospholipase A2 and a protein with molecular weight of 6,000. The contaminating proteins were removed by the second gel filtration chromatography. Conclusion : Gel filtration chromatography and propionic acid/urea polyacrylamide gel electrophoresis are useful to separate peptide components including melittin from bee venom.

  11. Quantification of Multiple Components of Complex Aluminum-Based Adjuvant Mixtures by Using Fourier Transform Infrared Spectroscopy and Partial Least Squares Modeling.

    Science.gov (United States)

    Dowling, Quinton M; Kramer, Ryan M

    2017-01-01

    Fourier transform infrared (FTIR) spectroscopy is widely used in the pharmaceutical industry for process monitoring, compositional quantification, and characterization of critical quality attributes in complex mixtures. Advantages over other spectroscopic measurements include ease of sample preparation, quantification of multiple components from a single measurement, and the ability to quantify optically opaque samples. This method describes the use of a multivariate model for quantifying a TLR4 agonist (GLA) adsorbed onto aluminum oxyhydroxide (Alhydrogel ® ) using FTIR spectroscopy that may be adapted to quantify other complex aluminum based adjuvant mixtures.

  12. Classification of Polarimetric SAR Image Based on Support Vector Machine Using Multiple-Component Scattering Model and Texture Features

    Directory of Open Access Journals (Sweden)

    Lamei Zhang

    2010-01-01

    Full Text Available The classification of polarimetric SAR image based on Multiple-Component Scattering Model (MCSM and Support Vector Machine (SVM is presented in this paper. MCSM is a potential decomposition method for a general condition. SVM is a popular tool for machine learning tasks involving classification, recognition, or detection. The scattering powers of single-bounce, double-bounce, volume, helix, and wire scattering components are extracted from fully polarimetric SAR images. Combining with the scattering powers of MCSM and the selected texture features from Gray-level cooccurrence matrix (GCM, SVM is used for the classification of polarimetric SAR image. We generate a validity test for the proposed method using Danish EMISAR L-band fully polarimetric data of Foulum Area (DK, Denmark. The preliminary result indicates that this method can classify most of the areas correctly.

  13. Ca analysis: An Excel based program for the analysis of intracellular calcium transients including multiple, simultaneous regression analysis☆

    Science.gov (United States)

    Greensmith, David J.

    2014-01-01

    Here I present an Excel based program for the analysis of intracellular Ca transients recorded using fluorescent indicators. The program can perform all the necessary steps which convert recorded raw voltage changes into meaningful physiological information. The program performs two fundamental processes. (1) It can prepare the raw signal by several methods. (2) It can then be used to analyze the prepared data to provide information such as absolute intracellular Ca levels. Also, the rates of change of Ca can be measured using multiple, simultaneous regression analysis. I demonstrate that this program performs equally well as commercially available software, but has numerous advantages, namely creating a simplified, self-contained analysis workflow. PMID:24125908

  14. Ca analysis: an Excel based program for the analysis of intracellular calcium transients including multiple, simultaneous regression analysis.

    Science.gov (United States)

    Greensmith, David J

    2014-01-01

    Here I present an Excel based program for the analysis of intracellular Ca transients recorded using fluorescent indicators. The program can perform all the necessary steps which convert recorded raw voltage changes into meaningful physiological information. The program performs two fundamental processes. (1) It can prepare the raw signal by several methods. (2) It can then be used to analyze the prepared data to provide information such as absolute intracellular Ca levels. Also, the rates of change of Ca can be measured using multiple, simultaneous regression analysis. I demonstrate that this program performs equally well as commercially available software, but has numerous advantages, namely creating a simplified, self-contained analysis workflow. Copyright © 2013 The Author. Published by Elsevier Ireland Ltd.. All rights reserved.

  15. Stepped-wedge cluster randomised controlled trials: a generic framework including parallel and multiple-level designs.

    Science.gov (United States)

    Hemming, Karla; Lilford, Richard; Girling, Alan J

    2015-01-30

    Stepped-wedge cluster randomised trials (SW-CRTs) are being used with increasing frequency in health service evaluation. Conventionally, these studies are cross-sectional in design with equally spaced steps, with an equal number of clusters randomised at each step and data collected at each and every step. Here we introduce several variations on this design and consider implications for power. One modification we consider is the incomplete cross-sectional SW-CRT, where the number of clusters varies at each step or where at some steps, for example, implementation or transition periods, data are not collected. We show that the parallel CRT with staggered but balanced randomisation can be considered a special case of the incomplete SW-CRT. As too can the parallel CRT with baseline measures. And we extend these designs to allow for multiple layers of clustering, for example, wards within a hospital. Building on results for complete designs, power and detectable difference are derived using a Wald test and obtaining the variance-covariance matrix of the treatment effect assuming a generalised linear mixed model. These variations are illustrated by several real examples. We recommend that whilst the impact of transition periods on power is likely to be small, where they are a feature of the design they should be incorporated. We also show examples in which the power of a SW-CRT increases as the intra-cluster correlation (ICC) increases and demonstrate that the impact of the ICC is likely to be smaller in a SW-CRT compared with a parallel CRT, especially where there are multiple levels of clustering. Finally, through this unified framework, the efficiency of the SW-CRT and the parallel CRT can be compared. © 2014 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.

  16. Multiple components and induction mechanism of the chitinolytic system of the hyperthermophilic archaeon Thermococcus chitonophagus.

    Science.gov (United States)

    Andronopoulou, Evi; Vorgias, Constantinos E

    2004-11-01

    Thermococcus chitonophagus produces several, cellular and extracellular chitinolytic enzymes following induction with various types of chitin and chitin oligomers, as well as cellulose. Factors affecting the anaerobic culture of this archaeon, such as optimal temperature, agitation speed and type of chitin, were investigated. A series of chitinases, co-isolated with the major, cell membrane-associated endochitinase (Chi70), and a periplasmic chitobiase (Chi90) were subsequently isolated. In addition, a distinct chitinolytic activity was detected in the culture supernatant and partially purified. This enzyme exhibited an apparent molecular mass of 50 kDa (Chi50) and was optimally active at 80 degrees C and pH 6.0. Chi50 was classified as an exochitinase based on its ability to release chitobiose as the exclusive hydrolysis product of colloidal chitin. A multi-component enzymatic apparatus, consisting of an extracellular exochitinase (Chi50), a periplasmic chitobiase (Chi90) and at least one cell-membrane-anchored endochitinase (Chi70), seems to be sufficient for effective synergistic in vivo degradation of chitin. Induction with chitin stimulates the coordinated expression of a combination of chitinolytic enzymes exhibiting different specificities for polymeric chitin and its degradation products. Among all investigated potential inducers and nutrient substrates, colloidal chitin was the strongest inducer of chitinase synthesis, whereas the highest growth rate was obtained following the addition of yeast extract and/or peptone to the minimal, mineralic culture medium in the absence of chitin. In rich medium, chitin monomer acted as a repressor of total chitinolytic activity, indicating the presence of a negative feedback regulatory mechanism. Despite the undisputable fact that the multi-component chitinolytic system of this archaeon is strongly induced by chitin, it is clear that, even in the absence of any chitinous substrates, there is low-level, basal

  17. Cumulative organic anion transporter-mediated drug-drug interaction potential of multiple components in salvia miltiorrhiza (danshen) preparations.

    Science.gov (United States)

    Wang, Li; Venitz, Jürgen; Sweet, Douglas H

    2014-12-01

    To evaluate organic anion transporter-mediated drug-drug interaction (DDI) potential for individual active components of Danshen (Salvia miltiorrhiza) vs. combinations using in vitro and in silico approaches. Inhibition profiles for single Danshen components and combinations were generated in stably-expressing human (h)OAT1 and hOAT3 cells. Plasma concentration-time profiles for compounds were estimated from in vivo human data using an i.v. two-compartment model (with first-order elimination). The cumulative DDI index was proposed as an indicator of DDI potential for combination products. This index was used to evaluate the DDI potential for Danshen injectables from 16 different manufacturers and 14 different lots from a single manufacturer. The cumulative DDI index predicted in vivo inhibition potentials, 82% (hOAT1) and 74% (hOAT3), comparable with those observed in vitro, 72 ± 7% (hOAT1) and 81 ± 10% (hOAT3), for Danshen component combinations. Using simulated unbound Cmax values, a wide range in cumulative DDI index between manufacturers, and between lots, was predicted. Many products exhibited a cumulative DDI index > 1 (50% inhibition). Danshen injectables will likely exhibit strong potential to inhibit hOAT1 and hOAT3 function in vivo. The proposed cumulative DDI index might improve prediction of DDI potential of herbal medicines or pharmaceutical preparations containing multiple components.

  18. Hierarchical, parallel computing strategies using component object model for process modelling responses of forest plantations to interacting multiple stresses

    Science.gov (United States)

    J. G. Isebrands; G. E. Host; K. Lenz; G. Wu; H. W. Stech

    2000-01-01

    Process models are powerful research tools for assessing the effects of multiple environmental stresses on forest plantations. These models are driven by interacting environmental variables and often include genetic factors necessary for assessing forest plantation growth over a range of different site, climate, and silvicultural conditions. However, process models are...

  19. The prediction of parental self-efficacy and hyper-anxiety symptoms based on the components of mindfulness in women with multiple sclerosis

    Directory of Open Access Journals (Sweden)

    Mohammad Mohammadi Pour

    2017-08-01

    Full Text Available Introduction: The present study aimed to predict parental self-efficacy and hyper-anxiety symptoms based on the components of mindfulness in women with multiple sclerosis (MS. Materials and Methods: The statistical population of this descriptive-correlational study included all women with MS in Mashhad during March-Jun 2016 who referred for treatment to clinics, neurologists and psychological centers. The statistical sample consisted of 105 women with MS who were selected using convenient sampling method. In order to collect data, Parental Self-Efficacy Questionnaire, Beck Anxiety Inventory (BIA and Mindfulness Questionnaire were used. Data were analyzed using multivariate regression method. Results: The results revealed that the components of mindfulness, judgment and non-reactivity can reduce anxiety significantly in women with MS. In addition, action with awareness, judgment and non-reactivity can increase parental self-efficacy (P

  20. Improvement in genetic evaluation of female fertility in dairy cattle using multiple-trait models including milk production traits

    DEFF Research Database (Denmark)

    Sun, C; Madsen, P; Lund, M S

    2010-01-01

    This study investigated the improvement in genetic evaluation of fertility traits by using production traits as secondary traits (MILK = 305-d milk yield, FAT = 305-d fat yield, and PROT = 305-d protein yield). Data including 471,742 records from first lactations of Denmark Holstein cows, covering...... (DATAC1, which only contained the first crop daughters) for proven bulls. In addition, the superiority of the models was evaluated by expected reliability of EBV, calculated from the prediction error variance of EBV. Based on these criteria, the models combining milk production traits showed better model...... stability and predictive ability than single-trait models for all the fertility traits, except for nonreturn rate within 56 d after first service. The stability and predictive ability for the model including MILK or PROT were similar to the model including all 3 milk production traits and better than...

  1. Study Modules for Calculus-Based General Physics. [Includes Modules 3-5: Planar Motion; Newton's Laws; and Vector Multiplication].

    Science.gov (United States)

    Fuller, Robert G., Ed.; And Others

    This is part of a series of 42 Calculus Based Physics (CBP) modules totaling about 1,000 pages. The modules include study guides, practice tests, and mastery tests for a full-year individualized course in calculus-based physics based on the Personalized System of Instruction (PSI). The units are not intended to be used without outside materials;…

  2. Latent introduction to the Netherlands of multiple antibiotic resistance including NDM-1 after hospitalisation in Egypt, August 2013

    NARCIS (Netherlands)

    Bathoorn, E.; Friedrich, A W; Zhou, K; Arends, J P; Borst, D M; Grundmann, H; Rossen, J W

    2013-01-01

    We describe the introduction of various multi-drug resistant bacterial strains, including an NDM-1-producing Klebsiella pneumoniae, through a traveller returning from Egypt, where they had been admitted to a private hospital. All family members of the patient were colonised with one or more

  3. Outcomes of an aquatic exercise program including aerobic capacity, lactate threshold, and fatigue in two individuals with multiple sclerosis.

    Science.gov (United States)

    Pariser, Gina; Madras, Diane; Weiss, Elizabeth

    2006-06-01

    Fatigue in individuals with multiple sclerosis (MS) may be exacerbated by poor cardiovascular fitness. Although aqua aerobic exercise is often recommended, little research has been conducted on the efficacy of aqua aerobic exercise in improving cardiovascular fitness in patients with MS. The purpose of this case report is to describe changes in cardiovascular fitness and fatigue for 2 people with MS following an aqua aerobics class. The participants were 2 females, both with MS for over 10 years and mild disability. Participant A (40 years old and EDSS = 2.5/10) reported fatigue, numbness in her hands and feet, and occasional blurred vision. Participant B (51 years old and EDSS = 3.0/10) reported the same problems as Participant A plus stiffness in her right lower extremity. The participants performed aqua aerobics at an intensity equivalent to their lactate threshold twice a week for 8 weeks. Lactate threshold is the exercise intensity just prior to the accumulation of blood lactate during graded exercise. A graded exercise test (with measurements of gas exchange) and a test of fatigue were administered before and after the intervention. Initially, both participants had poor cardiovascular fitness as demonstrated by their low peak oxygen consumption (VO2peak) and low lactate threshold (LT). After the intervention, both participants achieved a higher peak workload (their VO2peak increased) and they could sustain a higher submaximal workload without accumulation of acid substances causing fatigue (their LT increased). Changes in fatigue following the intervention were equivocal with Participant A reporting decreased fatigue and Participant B reporting no change. This report describes the use of exercise testing to guide clinical decision making for dosing of an aqua aerobic fitness intervention and illustrates positive effects of the intervention on cardiovascular fitness in 2 people with MS.

  4. Klotho: a humeral mediator in CSF and plasma that influences longevity and susceptibility to multiple complex disorders, including depression

    OpenAIRE

    Pavlatou, M G; Remaley, A T; Gold, P W

    2016-01-01

    Klotho is a hormone secreted into human cerebrospinal fluid (CSF), plasma and urine that promotes longevity and influences the onset of several premature senescent phenotypes in mice and humans, including atherosclerosis, cardiovascular disease, stroke and osteoporosis. Preliminary studies also suggest that Klotho possesses tumor suppressor properties. Klotho's roles in these phenomena were first suggested by studies demonstrating that a defect in the Klotho gene in mice results in a signific...

  5. Multiple Scattering Principal Component-based Radiative Transfer Model (PCRTM) from Far IR to UV-Vis

    Science.gov (United States)

    Liu, X.; Wu, W.; Yang, Q.

    2017-12-01

    Modern satellite hyperspectral satellite remote sensors such as AIRS, CrIS, IASI, CLARREO all require accurate and fast radiative transfer models that can deal with multiple scattering of clouds and aerosols to explore the information contents. However, performing full radiative transfer calculations using multiple stream methods such as discrete ordinate (DISORT), doubling and adding (AD), successive order of scattering order of scattering (SOS) are very time consuming. We have developed a principal component-based radiative transfer model (PCRTM) to reduce the computational burden by orders of magnitudes while maintain high accuracy. By exploring spectral correlations, the PCRTM reduce the number of radiative transfer calculations in frequency domain. It further uses a hybrid stream method to decrease the number of calls to the computational expensive multiple scattering calculations with high stream numbers. Other fast parameterizations have been used in the infrared spectral region reduce the computational time to milliseconds for an AIRS forward simulation (2378 spectral channels). The PCRTM has been development to cover spectral range from far IR to UV-Vis. The PCRTM model have been be used for satellite data inversions, proxy data generation, inter-satellite calibrations, spectral fingerprinting, and climate OSSE. We will show examples of applying the PCRTM to single field of view cloudy retrievals of atmospheric temperature, moisture, traces gases, clouds, and surface parameters. We will also show how the PCRTM are used for the NASA CLARREO project.

  6. Multiple Beneficial Lipids Including Lecithin Detected in the Edible Invasive Mollusk Crepidula fornicata from the French Northeastern Atlantic Coast

    Directory of Open Access Journals (Sweden)

    Flore Dagorn

    2014-12-01

    Full Text Available The invasive mollusk Crepidula fornicata, occurring in large amounts in bays along the French Northeastern Atlantic coasts, may have huge environmental effects in highly productive ecosystems where shellfish are exploited. The present study aims at determining the potential economic value of this marine species in terms of exploitable substances with high added value. Lipid content and phospholipid (PL composition of this mollusk collected on the Bourgneuf Bay were studied through four seasons. Winter specimens contained the highest lipid levels (5.3% dry weight, including 69% of PLs. Phosphatidylcholine (PC was the major PL class all year, accounting for 63.9% to 88.9% of total PLs. Consequently, the winter specimens were then investigated for PL fatty acids (FAs, and free sterols. Dimethylacetals (DMAs were present (10.7% of PL FA + DMA mixture revealing the occurrence of plasmalogens. More than forty FAs were identified, including 20:5n-3 (9.4% and 22:6n-3 (7.3% acids. Fourteen free sterols were present, including cholesterol at 31.3% of the sterol mixture and about 40% of phytosterols. These data on lipids of C. fornicata demonstrate their positive attributes for human nutrition and health. The PL mixture, rich in PC and polyunsaturated FAs, offers an interesting alternative source of high value-added marine lecithin.

  7. Bioavailability of multiple components following acute ingestion of a polyphenol-rich juice drink.

    Science.gov (United States)

    Borges, Gina; Mullen, William; Mullan, Adam; Lean, Michael E J; Roberts, Susan A; Crozier, Alan

    2010-07-01

    A healthy diet involves eating fruit and vegetables on a daily basis, the benefits of which are in part linked to the ingestion of bioactive compounds including polyphenols. As a convenient means of delivering additional polyphenols to the diet, a polyphenol-rich (P-R) juice drink was prepared and the bioavailability of its diverse spectrum of constituents investigated. Ten human volunteers followed a low-flavonoid diet for 2 days before drinking 350 mL of the P-R beverage. Plasma and urine were collected for 24 h and analyzed by HPLC-PDA-MS. The plasma pharmacokinetics and recoveries of urinary metabolites of flavan-3-ols, flavanones, dihydrochalcones and 5-O-caffeoylquinic acid, both in terms of their identity and quantity, were, in most instances, not markedly different to those reported in other feeding studies with green tea, orange juice, apple cider and coffee. This indicates that the combination of polyphenolic compounds in the P-R beverage are absorbed and excreted to a similar extent whether fed individually or together in a single beverage. It is concluded that the P-R beverage can deliver the intended blend of bioavailable polyphenols, which would normally require consumption of several different plant-derived foods.

  8. Multiple hemorrhages in brain after spine surgery supra- and infra-tentorial components together

    Directory of Open Access Journals (Sweden)

    Baran Yilmaz

    2015-01-01

    Full Text Available Remote cerebellar hemorrhage after cranial and spinal surgeries is a well-documented entity, so far concomitant supra- and infra-tentorial hemorrhage after spine surgery has rarely been reported in the literature. A 57-year-old woman presented with intractable low back pain and severely impaired mobility. One year ago, she underwent lumbar laminectomy and fusion with posterior spinal instrumentation between L2 and S1. She developed adjacent segment disease at the upper level of the instrumented vertebra. She had a revision surgery and underwent posterior laminectomy and fusion with bilateral transpedicular instrumentation between T10 and S1. She had severe headache, somnolence, and left hemiparesia 48 h after the surgery. Her emergent head computed tomography depicted intra-parenchymal hemorrhage in the right parietal lobe accompanying with subarachnoid hemorrhage, bilateral symmetrical cerebellar hemorrhages and pneumocephalus. She was treated nonsurgically and she got better despite some residual deficits. Symptoms including constant headache, nausea, vomiting, impaired consciousness, new onset seizure, and focal neurological deficit after spine surgeries should raise suspicion for intracranial intra-parenchymal hemorrhage.

  9. Multiple component patient safety intervention in English hospitals: controlled evaluation of second phase.

    Science.gov (United States)

    Benning, Amirta; Dixon-Woods, Mary; Nwulu, Ugochi; Ghaleb, Maisoon; Dawson, Jeremy; Barber, Nick; Franklin, Bryony Dean; Girling, Alan; Hemming, Karla; Carmalt, Martin; Rudge, Gavin; Naicker, Thirumalai; Kotecha, Amit; Derrington, M Clare; Lilford, Richard

    2011-02-03

    = 0.002), but the difference in difference was not significant (2.1, 0.4 to 11.1; P = 0.236). There were no notable or significant changes in the pattern of prescribing errors, either over time or between control and SPI2 hospitals. Two items of medical history taking (exercise tolerance and occupation) showed significant improvement over time, across both control and SPI2 hospitals, but no additional SPI2 effect. The holistic review showed no significant changes in error rates either over time or between control and SPI2 hospitals. The explicit case note review of perioperative care showed that adherence rates for two of the four perioperative standards targeted by SPI2 were already good at baseline, exceeding 94% for antibiotic prophylaxis and 98% for deep vein thrombosis prophylaxis. Intraoperative monitoring of temperature improved over time in both groups, but this was not significant (1.8, 0.4 to 7.6; P = 0.279), and there were no additional effects of SPI2. A dramatic rise in consumption of soap and alcohol hand rub was similar in control and SPI2 hospitals (P = 0.760 and P = 0.889, respectively), as was the corresponding decrease in rates of Clostridium difficile and meticillin resistant Staphylococcus aureus infection (P = 0.652 and P = 0.693, respectively). Mortality rates of medical patients included in the case note reviews in control hospitals increased from 17.3% (42/243) to 21.4% (24/112), while in SPI2 hospitals they fell from 10.3% (24/233) to 6.1% (7/114) (P = 0.043). Fewer than 8% of deaths were classed as avoidable; changes in proportions could not explain the divergence of overall death rates between control and SPI2 hospitals. There was no significant difference in the rate of change in mortality in intensive care. Patients' satisfaction improved in both control and SPI2 hospitals on all dimensions, but again there were no significant changes between the two groups of hospitals. Many aspects of care are already good or improving across the NHS in

  10. Using 'component multiplication' in MONK to reduce pessimism in the dose rate assessment for water-filled (ullaged) transport packages

    International Nuclear Information System (INIS)

    Dean, M.H.

    2002-01-01

    The external dose rates from spent fuel packages consist of gamma ray and neutron components. The source of gamma rays is from fission products and actinides in the spent fuel and from activation products in structural components of the fuel element. Neutrons originate from spontaneous fission in actinides (for example from curium isotopes) within the spent fuel and from (alpha, n) reactions in oxide fuel. However, a significant number of neutrons are produced due to further fission within the fuel. This is known as neutron enhancement or multiplication (M). To treat the effects of enhancement, the neutron source may be scaled within the dose rate calculation. In a wet package, it has been customary to determine k effective (k eff ) for a completely water-filled package or a package with a defined water level (for the horizontal transport condition). The irradiation of the fuel is normally taken into account in calculating k eff for this purpose. The neutron enhancement is then obtained by calculating M=1/(1-k eff ), which is then applied as a source scaling factor throughout each fuel assembly. In a wet package, there is normally an ullage volume above the water level, the package only being partially flooded. The ullage volume is designed to accommodate pressure build-up within the package. Typically the top row of fuel assemblies may be partially covered and partially uncovered by water. When the above value of M is used for fuel within the dry part of the package, dose rates above the package tend to be overestimated and can limit the carrying capability of the package. (Also, a single value of M will tend to over-predict dose rate contributions from all assemblies around the periphery). Use of component multiplication (a new feature available in the MONK computer code) enables two separate values of 'k eff ' to be determined for the wet and dry parts of the package. These typically differ by a factor of three, leading to differences in the enhancement, M. Use

  11. Identifying relevant components to include in a parenting intervention for homeless families in transitional housing: Using parent input to inform adaptation efforts.

    Science.gov (United States)

    Holtrop, Kendal; Chaviano, Casey L; Scott, Jenna C; McNeil Smith, Shardé

    2015-11-01

    Homeless families in transitional housing face a number of distinct challenges, yet there is little research seeking to guide prevention and intervention work with homeless parents. Informed by the tenets of community-based participatory research, the purpose of this study was to identify relevant components to include in a parenting intervention for this population. Data were gathered from 40 homeless parents through semistructured individual interviews and were analyzed using qualitative content analysis. The resulting 15 categories suggest several topics, approach considerations, and activities that can inform parenting intervention work with homeless families in transitional housing. Study findings are discussed within the context of intervention fidelity versus adaptation, and implications for practice, research, and policy are suggested. This study provides important insights for informing parenting intervention adaptation and implementation efforts with homeless families in transitional housing. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

  12. Influenza A Virus Hemagglutinin is Required for the Assembly of Viral Components Including Bundled vRNPs at the Lipid Raft

    Directory of Open Access Journals (Sweden)

    Naoki Takizawa

    2016-09-01

    Full Text Available The influenza glycoproteins, hemagglutinin (HA and neuraminidase (NA, which are associated with the lipid raft, have the potential to initiate virion budding. However, the role of these viral proteins in infectious virion assembly is still unclear. In addition, it is not known how the viral ribonucleoprotein complex (vRNP is tethered to the budding site. Here, we show that HA is necessary for the efficient progeny virion production and vRNP packaging in the virion. We also found that the level of HA does not affect the bundling of the eight vRNP segments, despite reduced virion production. Detergent solubilization and a subsequent membrane flotation analysis indicated that the accumulation of nucleoprotein, viral polymerases, NA, and matrix protein 1 (M1 in the lipid raft fraction was delayed without HA. Based on our results, we inferred that HA plays a role in the accumulation of viral components, including bundled vRNPs, at the lipid raft.

  13. The effect of weight management interventions that include a diet component on weight-related outcomes in pregnant and postpartum women: a systematic review protocol.

    Science.gov (United States)

    Spencer, Lisa; Rollo, Megan; Hauck, Yvonne; MacDonald-Wicks, Lesley; Wood, Lisa; Hutchesson, Melinda; Giglia, Roslyn; Smith, Roger; Collins, Clare

    2015-01-01

    What are the effects of weight management interventions that include a diet component on weight-related outcomes in pregnant and postpartum women?The primary objective of this systematic review is to evaluate the effectiveness of weight management interventions which include a diet component and are aimed at limiting gestational weight gain and postpartum weight retention in women.The second objective of this systematic review is to investigate included intervention components with respect to effect on weight-related outcomes. This may include, but is not limited to: length of intervention, use of face-to-face counselling, group or individual consultations, use of other interventions components including exercise, use of goals and use of support tools like food diaries, coaching, including email or text message support. Around half of all women of reproductive age are either overweight or obese, with women aged 25-34 years having a greater risk of substantial weight gain compared with men of all ages. Excessive gestational weight gain (GWG) and postpartum weight retention (PPWR) may play a significant role in long term obesity. Having one child doubles the five- and 10-year obesity incidence for women, with many women who gain excessive weight during pregnancy remaining obese permanently. Excessive GWG and/or PPWR can also significantly contribute to short- and long-term adverse health outcomes for mother, baby and future pregnancies.Maternal obesity increases the risk of pregnancy related complications such as pre-eclampsia, gestational diabetes mellitus, stillbirth and the rate of caesarean section. Childhood obesity is a further long term complication of maternal obesity for offspring, which may persist in to adulthood. Excess GWG is also a risk factor for PPWR both in the short and long-term. Nehring et al. conducted a meta-analysis with over 65,000 women showing that, compared to women who gained weight within recommendations during pregnancy, women with GWG

  14. Performance optimization of Sparse Matrix-Vector Multiplication for multi-component PDE-based applications using GPUs

    KAUST Repository

    Abdelfattah, Ahmad

    2016-05-23

    Simulations of many multi-component PDE-based applications, such as petroleum reservoirs or reacting flows, are dominated by the solution, on each time step and within each Newton step, of large sparse linear systems. The standard solver is a preconditioned Krylov method. Along with application of the preconditioner, memory-bound Sparse Matrix-Vector Multiplication (SpMV) is the most time-consuming operation in such solvers. Multi-species models produce Jacobians with a dense block structure, where the block size can be as large as a few dozen. Failing to exploit this dense block structure vastly underutilizes hardware capable of delivering high performance on dense BLAS operations. This paper presents a GPU-accelerated SpMV kernel for block-sparse matrices. Dense matrix-vector multiplications within the sparse-block structure leverage optimization techniques from the KBLAS library, a high performance library for dense BLAS kernels. The design ideas of KBLAS can be applied to block-sparse matrices. Furthermore, a technique is proposed to balance the workload among thread blocks when there are large variations in the lengths of nonzero rows. Multi-GPU performance is highlighted. The proposed SpMV kernel outperforms existing state-of-the-art implementations using matrices with real structures from different applications. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  15. Global analysis of multiple gas chromatography-mass spectrometry (GC/MS) data sets: A method for resolution of co-eluting components with comparison to MCR-ALS

    NARCIS (Netherlands)

    van Stokkum, I.H.M.; Mullen, K.M.; Mihaleva, V.V.

    2009-01-01

    Global analysis has been applied to resolve components in multiple gas chromatography-mass spectrometry (GC/MS) data sets. Global analysis methodology is based upon a parametrized model of the observed data, including random (and possibly also systematic) errors. Each elution profile is described as

  16. More Than Just Accuracy: A Novel Method to Incorporate Multiple Test Attributes in Evaluating Diagnostic Tests Including Point of Care Tests.

    Science.gov (United States)

    Thompson, Matthew; Weigl, Bernhard; Fitzpatrick, Annette; Ide, Nicole

    2016-01-01

    Current frameworks for evaluating diagnostic tests are constrained by a focus on diagnostic accuracy, and assume that all aspects of the testing process and test attributes are discrete and equally important. Determining the balance between the benefits and harms associated with new or existing tests has been overlooked. Yet, this is critically important information for stakeholders involved in developing, testing, and implementing tests. This is particularly important for point of care tests (POCTs) where tradeoffs exist between numerous aspects of the testing process and test attributes. We developed a new model that multiple stakeholders (e.g., clinicians, patients, researchers, test developers, industry, regulators, and health care funders) can use to visualize the multiple attributes of tests, the interactions that occur between these attributes, and their impacts on health outcomes. We use multiple examples to illustrate interactions between test attributes (test availability, test experience, and test results) and outcomes, including several POCTs. The model could be used to prioritize research and development efforts, and inform regulatory submissions for new diagnostics. It could potentially provide a way to incorporate the relative weights that various subgroups or clinical settings might place on different test attributes. Our model provides a novel way that multiple stakeholders can use to visualize test attributes, their interactions, and impacts on individual and population outcomes. We anticipate that this will facilitate more informed decision making around diagnostic tests.

  17. Multiple Legionella pneumophila Type II secretion substrates, including a novel protein, contribute to differential infection of the amoebae Acanthamoeba castellanii, Hartmannella vermiformis, and Naegleria lovaniensis.

    Science.gov (United States)

    Tyson, Jessica Y; Pearce, Meghan M; Vargas, Paloma; Bagchi, Sreya; Mulhern, Brendan J; Cianciotto, Nicholas P

    2013-05-01

    Type II protein secretion (T2S) by Legionella pneumophila is required for intracellular infection of host cells, including macrophages and the amoebae Acanthamoeba castellanii and Hartmannella vermiformis. Previous proteomic analysis revealed that T2S by L. pneumophila 130b mediates the export of >25 proteins, including several that appeared to be novel. Following confirmation that they are unlike known proteins, T2S substrates NttA, NttB, and LegP were targeted for mutation. nttA mutants were impaired for intracellular multiplication in A. castellanii but not H. vermiformis or macrophages, suggesting that novel exoproteins which are specific to Legionella are especially important for infection. Because the importance of NttA was host cell dependent, we examined a panel of T2S substrate mutants that had not been tested before in more than one amoeba. As a result, RNase SrnA, acyltransferase PlaC, and metalloprotease ProA all proved to be required for optimal intracellular multiplication in H. vermiformis but not A. castellanii. Further examination of an lspF mutant lacking the T2S apparatus documented that T2S is also critical for infection of the amoeba Naegleria lovaniensis. Mutants lacking SrnA, PlaC, or ProA, but not those deficient for NttA, were defective in N. lovaniensis. Based upon analysis of a double mutant lacking PlaC and ProA, the role of ProA in H. vermiformis was connected to its ability to activate PlaC, whereas in N. lovaniensis, ProA appeared to have multiple functions. Together, these data document that the T2S system exports multiple effectors, including a novel one, which contribute in different ways to the broad host range of L. pneumophila.

  18. A principal-component and least-squares method for allocating polycyclic aromatic hydrocarbons in sediment to multiple sources

    International Nuclear Information System (INIS)

    Burns, W.A.; Mankiewicz, P.J.; Bence, A.E.; Page, D.S.; Parker, K.R.

    1997-01-01

    A method was developed to allocate polycyclic aromatic hydrocarbons (PAHs) in sediment samples to the PAH sources from which they came. The method uses principal-component analysis to identify possible sources and a least-squares model to find the source mix that gives the best fit of 36 PAH analytes in each sample. The method identified 18 possible PAH sources in a large set of field data collected in Prince William Sound, Alaska, USA, after the 1989 Exxon Valdez oil spill, including diesel oil, diesel soot, spilled crude oil in various weathering states, natural background, creosote, and combustion products from human activities and forest fires. Spill oil was generally found to be a small increment of the natural background in subtidal sediments, whereas combustion products were often the predominant sources for subtidal PAHs near sites of past or present human activity. The method appears to be applicable to other situations, including other spills

  19. Intensity inhomogeneity compensation and tissue segmentation for magnetic resonance imaging with noise-suppressed multiplicative intrinsic component optimization

    Science.gov (United States)

    Dong, Huaipeng; Zhang, Qi; Shi, Jun

    2017-12-01

    Magnetic resonance (MR) images suffer from intensity inhomogeneity. Segmentation-based approaches can simultaneously achieve both intensity inhomogeneity compensation (IIC) and tissue segmentation for MR images with little noise, but they often fail for images polluted by severe noise. Here, we propose a noise-robust algorithm named noise-suppressed multiplicative intrinsic component optimization (NSMICO) for simultaneous IIC and tissue segmentation. Considering the spatial characteristics in an image, an adaptive nonlocal means filtering term is incorporated into the objective function of NSMICO to decrease image deterioration due to noise. Then, a fuzzy local factor term utilizing the spatial and gray-level relationship among local pixels is embedded into the objective function to reach a balance between noise suppression and detail preservation. Experimental results on synthetic natural and MR images with various levels of intensity inhomogeneity and noise, as well as in vivo clinical MR images, have demonstrated the effectiveness of the NSMICO and its superiority to three competing approaches. The NSMICO could be potentially valuable for MR image IIC and tissue segmentation.

  20. Improving Regional Dynamic Downscaling with Multiple Linear Regression Model Using Components Principal Analysis: Precipitation over Amazon and Northeast Brazil

    Directory of Open Access Journals (Sweden)

    Aline Gomes da Silva

    2014-01-01

    Full Text Available In the current context of climate change discussions, predictions of future scenarios of weather and climate are crucial for the generation of information of interest to the global community. Due to the atmosphere being a chaotic system, errors in predictions of future scenarios are systematically observed. Therefore, numerous techniques have been tested in order to generate more reliable predictions, and two techniques have excelled in science: dynamic downscaling, through regional models, and ensemble prediction, combining different outputs of climate models through the arithmetic average, in other words, a postprocessing of the output data species. Thus, this paper proposes a method of postprocessing outputs of regional climate models. This method consists in using the statistical tool multiple linear regression by principal components for combining different simulations obtained by dynamic downscaling with the regional climate model (RegCM4. Tests for the Amazon and Northeast region of Brazil (South America showed that the method provided a more realistic prediction in terms of average daily rainfall for the analyzed period prescribed, after comparing with the prediction made by set through the arithmetic averages of the simulations. This method photographed the extreme events (outlier that the prediction by averaging failed. Data from the Tropical Rainfall Measuring Mission (TRMM were used to evaluate the method.

  1. Synthesis and evaluation of the potential deleterious effects of ZnO nanomaterials (nanoneedles and nanoflowers) on blood components, including albumin, erythrocytes and human isolated primary neutrophils

    Energy Technology Data Exchange (ETDEWEB)

    Pastrello, Bruna [São Paulo State University (UNESP), Department of Chemistry, Faculty of Sciences (Brazil); Paracatu, Luana Chiquetto [São Paulo State University (UNESP), Department of Clinical Analysis, School of Pharmaceutical Sciences (Brazil); Carvalho Bertozo, Luiza de [São Paulo State University (UNESP), Department of Chemistry, Faculty of Sciences (Brazil); Paino, Iêda Maria Martinez [University of São Paulo (USP), Nanomedicine and Nanotoxicology Group, Physics Institute of São Carlos (IFSC) (Brazil); Lisboa-Filho, Paulo Noronha [São Paulo State University (UNESP), Department of Physics, Faculty of Sciences (Brazil); Ximenes, Valdecir Farias, E-mail: vfximenes@fc.unesp.br [São Paulo State University (UNESP), Department of Chemistry, Faculty of Sciences (Brazil)

    2016-07-15

    The application of zinc oxide (ZnO) nanoparticles in biomaterials has increased significantly in the recent years. Here, we aimed to study the potential deleterious effects of ZnO on blood components, including human serum albumin (HSA), erythrocytes and human isolated primary neutrophils. To test the influence of the morphology of the nanomaterials, ZnO nanoneedles (ZnO-nn) and nanoflowers (ZnO-nf) were synthesized. The zeta potential and mean size of ZnO-nf and ZnO-nn suspensions in phosphate-buffered saline were −10.73 mV and 3.81 nm and −5.27 mV and 18.26 nm, respectively. The incubation of ZnO with HSA did not cause its denaturation as verified by the absence of significant alterations in the intrinsic and extrinsic fluorescence and in the circular dichroism spectrum of the protein. The capacity of HSA as a drug carrier was not affected as verified by employing site I and II fluorescent markers. Neither type of ZnO was able to provoke the activation of neutrophils, as verified by lucigenin- and luminol-dependent chemiluminescence and by the extracellular release of hydrogen peroxide. ZnO-nf, but not ZnO-nn, induced the haemolysis of erythrocytes. In conclusion, our results reinforce the concept that ZnO nanomaterials are relatively safe for usage in biomaterials. A potential exception is the capacity of ZnO-nf to promote the lysis of erythrocytes, a discovery that shows the importance of the morphology in the toxicity of nanoparticles.

  2. Multiplicity

    Science.gov (United States)

    1991-04-01

    Virginia, 388 U.S. 1 (1967)(criminal statute prohibiting interracial marriages held unconstitutional violation of the Equal Protection and Due Process...such sentences does not violate the Constitution."°2 7 In effect , the double jeopardy protection from multiple punishments is coextensive with...unaware of what it accomplished . . . . In effect , the Blockburger test establishes a presumption of legislative intent: if each of two statutes

  3. Enriching an intraspecific genetic map and identifying QTL for fiber quality and yield component traits across multiple environments in Upland cotton (Gossypium hirsutum L.).

    Science.gov (United States)

    Liu, Xueying; Teng, Zhonghua; Wang, Jinxia; Wu, Tiantian; Zhang, Zhiqin; Deng, Xianping; Fang, Xiaomei; Tan, Zhaoyun; Ali, Iftikhar; Liu, Dexin; Zhang, Jian; Liu, Dajun; Liu, Fang; Zhang, Zhengsheng

    2017-12-01

    Cotton is a significant commercial crop that plays an indispensable role in many domains. Constructing high-density genetic maps and identifying stable quantitative trait locus (QTL) controlling agronomic traits are necessary prerequisites for marker-assisted selection (MAS). A total of 14,899 SSR primer pairs designed from the genome sequence of G. raimondii were screened for polymorphic markers between mapping parents CCRI 35 and Yumian 1, and 712 SSR markers showing polymorphism were used to genotype 180 lines from a (CCRI 35 × Yumian 1) recombinant inbred line (RIL) population. Genetic linkage analysis was conducted on 726 loci obtained from the 712 polymorphic SSR markers, along with 1379 SSR loci obtained in our previous study, and a high-density genetic map with 2051 loci was constructed, which spanned 3508.29 cM with an average distance of 1.71 cM between adjacent markers. Marker orders on the linkage map are highly consistent with the corresponding physical orders on a G. hirsutum genome sequence. Based on fiber quality and yield component trait data collected from six environments, 113 QTLs were identified through two analytical methods. Among these 113 QTLs, 50 were considered stable (detected in multiple environments or for which phenotypic variance explained by additive effect was greater than environment effect), and 18 of these 50 were identified with stability by both methods. These 18 QTLs, including eleven for fiber quality and seven for yield component traits, could be priorities for MAS.

  4. Comparing Multiple Evapotranspiration-calculating Methods, Including Eddy Covariance and Surface Renewal, Using Empirical Measurements from Alfalfa Fields in the Sacramento-San Joaquin River Delta

    Science.gov (United States)

    Clay, J.; Kent, E. R.; Leinfelder-Miles, M.; Lambert, J. J.; Little, C.; Paw U, K. T.; Snyder, R. L.

    2016-12-01

    Eddy covariance and surface renewal measurements were used to estimate evapotranspiration (ET) over a variety of crop fields in the Sacramento-San Joaquin River Delta during the 2016 growing season. However, comparing and evaluating multiple measurement systems and methods for determining ET was focused upon at a single alfalfa site. The eddy covariance systems included two systems for direct measurement of latent heat flux: one using a separate sonic anemometer and an open path infrared gas analyzer and another using a combined system (Campbell Scientific IRGASON). For these methods, eddy covariance was used with measurements from the Campbell Scientific CSAT3, the LI-COR 7500a, the Campbell Scientific IRGASON, and an additional R.M. Young sonic anemometer. In addition to those direct measures, the surface renewal approach included several energy balance residual methods in which net radiation, ground heat flux, and sensible heat flux (H) were measured. H was measured using several systems and different methods, including using multiple fast-response thermocouple measurements and using the temperatures measured by the sonic anemometers. The energy available for ET was then calculated as the residual of the surface energy balance equation. Differences in ET values were analyzed between the eddy covariance and surface renewal methods, using the IRGASON-derived values of ET as the standard for accuracy.

  5. A coupled electro-thermo-mechanical FEM code for large scale problems including multi-domain and multiple time-step aspects

    OpenAIRE

    Menanteau, Laurent; Pantalé, Olivier; Caperaa, Serge

    2005-01-01

    This work concerns the development of a virtual prototyping tool for large scale electro-thermo-mechanical simulation of power converters used in railway transport including multi-domain and multiple time-steps aspects. For this purpose, Domain Decomposition Method (DDM) is used to give on one hand the ability to treat large scale problems and on the other hand, for transient analysis, the ability to use different time-steps in different parts of the numerical model. An Object-Oriented progra...

  6. Prediction of preterm birth in multiple pregnancies: development of a multivariable model including cervical length measurement at 16 to 21 weeks' gestation.

    Science.gov (United States)

    van de Mheen, Lidewij; Schuit, Ewoud; Lim, Arianne C; Porath, Martina M; Papatsonis, Dimitri; Erwich, Jan J; van Eyck, Jim; van Oirschot, Charlotte M; Hummel, Piet; Duvekot, Johannes J; Hasaart, Tom H M; Groenwold, Rolf H H; Moons, Karl G M; de Groot, Christianne J M; Bruinse, Hein W; van Pampus, Maria G; Mol, Ben W J

    2014-04-01

    To develop a multivariable prognostic model for the risk of preterm delivery in women with multiple pregnancy that includes cervical length measurement at 16 to 21 weeks' gestation and other variables. We used data from a previous randomized trial. We assessed the association between maternal and pregnancy characteristics including cervical length measurement at 16 to 21 weeks' gestation and time to delivery using multivariable Cox regression modelling. Performance of the final model was assessed for the outcomes of preterm and very preterm delivery using calibration and discrimination measures. We studied 507 women, of whom 270 (53%) delivered models for preterm and very preterm delivery had a c-index of 0.68 (95% CI 0.63 to 0.72) and 0.68 (95% CI 0.62 to 0.75), respectively, and showed good calibration. In women with a multiple pregnancy, the risk of preterm delivery can be assessed with a multivariable model incorporating cervical length and other predictors.

  7. Fumigant Toxicity of Oriental Sweetgum (Liquidambar orientalis) and Valerian (Valeriana wallichii) Essential Oils and Their Components, Including Their Acetylcholinesterase Inhibitory Activity, against Japanese Termites (Reticulitermes speratus)

    OpenAIRE

    Park, Il-Kwon

    2014-01-01

    This study investigated the fumigant toxicity of oriental sweetgum (Liquidambar orientalis) and valerian (Valeriana wallichii) essential oils and their components against the Japanese termite (Reticulitermes speratus). The fumigant toxicity of oriental sweetgum and valerian oil differed significantly according to exposure time. Oriental sweetgum showed toxicity at short exposure times (2 days), and the toxicity of valerian oil was high 7 days after treatment. The main constituents of oriental...

  8. Design and Implementation of a Unified Command and Control Architecture for Multiple Cooperative Unmanned Vehicles Utilizing Commercial Off the Shelf Components

    Science.gov (United States)

    2015-12-24

    2 COTS Commercial Off the Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 UAV Unmanned...DESIGN AND IMPLEMENTATION OF A UNIFIED COMMAND AND CONTROL ARCHITECTURE FOR MULTIPLE COOPERATIVE UNMANNED VEHICLES UTILIZING COMMERCIAL OFF THE SHELF... COMMERCIAL OFF THE SHELF COMPONENTS THESIS Presented to the Faculty Department of Systems Engineering and Management Graduate School of Engineering and

  9. Long-term efficacy of standardised specific subcutaneous immunotherapy in children with persistent allergic rhinitis due to multiple allergens including house dust mites.

    Science.gov (United States)

    Song, Y; Long, J; Wang, T; Xie, J; Wang, M; Tan, G

    2018-03-01

    To observe the five-year efficacy of standardised specific subcutaneous immunotherapy for house dust mite allergy in monosensitised and polysensitised children with persistent allergic rhinitis. From January 2007 to August 2009, 236 children with persistent allergic rhinitis were divided into 2 groups: 1 group received standardised specific subcutaneous immunotherapy using house dust mite extract; the other received pharmacotherapy with intranasal corticosteroids and oral antihistamines. A total of 193 patients (106 in the immunotherapy group and 87 in the pharmacotherapy group) completed treatment. Scores for symptoms, total medication and quality of life were evaluated. The subcutaneous immunotherapy group demonstrated a significant reduction in visual analogue scale scores, Rhinoconjunctivitis Quality of Life Questionnaire scores and total medication scores (p 0.05). No serious adverse events occurred. Standardised subcutaneous immunotherapy has long-term efficacy for children with persistent allergic rhinitis. Single-allergen subcutaneous immunotherapy was appropriate for allergic rhinitis caused by multiple allergens, including house dust mites, in the paediatric population.

  10. The main component of an alarm pheromone of kissing bugs plays multiple roles in the cognitive modulation of the escape response

    Directory of Open Access Journals (Sweden)

    Sebastián eMinoli

    2013-07-01

    Full Text Available Innate responses in animals can be modulated by experience. Disturbed adults of the triatomine bug Triatoma infestans release an alarm pheromone (AP that elicits an escape response in conspecific larvae. The main component of this AP, the isobutyric acid (IsoAc, alone has already shown to generate an escape response in this species. However, not much is known about the modulation of this behavior by non-associative and associative cognitive processes. We present here evidences of the cognitive capacities of T. infestans larvae in an escape context under different conditioning paradigms, including IsoAc in different roles. We show that: 1 the duration of a pre-exposure to IsoAc plays a main role in determining the type of non-associative learning expressed: short time pre-exposures elicit a sensitization while a longer pre-exposure time triggers a switch from repellence to attractiveness; 2 a simple pre-exposure event is enough to modulate the escape response of larvae to the AP and to its main component: IsoAc; 3 IsoAc and the AP are perceived as different chemical entities; 4 an association between IsoAc and an aversive stimulus can be created under a classical conditioning paradigm; 5 an association between IsoAc and a self-action can be generated under an operant conditioning. These results evince that IsoAc can attain multiple and different cognitive roles in the modulation of the escape response of triatomines and show how cognitive processes can modulate a key behavior for surviving, as it is the escaping response in presence of a potential danger in insects.

  11. MiR-7 triggers cell cycle arrest at the G1/S transition by targeting multiple genes including Skp2 and Psme3.

    Directory of Open Access Journals (Sweden)

    Noelia Sanchez

    Full Text Available MiR-7 acts as a tumour suppressor in many cancers and abrogates proliferation of CHO cells in culture. In this study we demonstrate that miR-7 targets key regulators of the G1 to S phase transition, including Skp2 and Psme3, to promote increased levels of p27(KIP and temporary growth arrest of CHO cells in the G1 phase. Simultaneously, the down-regulation of DNA repair-specific proteins via miR-7 including Rad54L, and pro-apoptotic regulators such as p53, combined with the up-regulation of anti-apoptotic factors like p-Akt, promoted cell survival while arrested in G1. Thus miR-7 can co-ordinate the levels of multiple genes and proteins to influence G1 to S phase transition and the apoptotic response in order to maintain cellular homeostasis. This work provides further mechanistic insight into the role of miR-7 as a regulator of cell growth in times of cellular stress.

  12. Identification of More Feasible MicroRNA-mRNA Interactions within Multiple Cancers Using Principal Component Analysis Based Unsupervised Feature Extraction.

    Science.gov (United States)

    Taguchi, Y-H

    2016-05-10

    MicroRNA(miRNA)-mRNA interactions are important for understanding many biological processes, including development, differentiation and disease progression, but their identification is highly context-dependent. When computationally derived from sequence information alone, the identification should be verified by integrated analyses of mRNA and miRNA expression. The drawback of this strategy is the vast number of identified interactions, which prevents an experimental or detailed investigation of each pair. In this paper, we overcome this difficulty by the recently proposed principal component analysis (PCA)-based unsupervised feature extraction (FE), which reduces the number of identified miRNA-mRNA interactions that properly discriminate between patients and healthy controls without losing biological feasibility. The approach is applied to six cancers: hepatocellular carcinoma, non-small cell lung cancer, esophageal squamous cell carcinoma, prostate cancer, colorectal/colon cancer and breast cancer. In PCA-based unsupervised FE, the significance does not depend on the number of samples (as in the standard case) but on the number of features, which approximates the number of miRNAs/mRNAs. To our knowledge, we have newly identified miRNA-mRNA interactions in multiple cancers based on a single common (universal) criterion. Moreover, the number of identified interactions was sufficiently small to be sequentially curated by literature searches.

  13. Fumigant toxicity of Oriental sweetgum (Liquidambar orientalis) and valerian (Valeriana wallichii) essential oils and their components, including their acetylcholinesterase inhibitory activity, against Japanese termites (Reticulitermes speratus).

    Science.gov (United States)

    Park, Il-Kwon

    2014-08-19

    This study investigated the fumigant toxicity of oriental sweetgum (Liquidambar orientalis) and valerian (Valeriana wallichii) essential oils and their components against the Japanese termite (Reticulitermes speratus). The fumigant toxicity of oriental sweetgum and valerian oil differed significantly according to exposure time. Oriental sweetgum showed toxicity at short exposure times (2 days), and the toxicity of valerian oil was high 7 days after treatment. The main constituents of oriental sweetgum and valerian oils were tested individually for their fumigant toxicity against Japanese termites. Among the test compounds, benzyl alcohol, acetophenone, 1-phenyl-1-ethanol, hydrocinnamyl alcohol, trans-cinnamyl aldehyde, trans-cinnamyl alcohol, cis-asarone, styrene, and cis-ocimene showed toxicity against Japanese termites 7 days after treatment. Hydrocinnamyl alcohol and trans-cinnamyl alcohol were found to be the major contributors to the fumigant antitermitic toxicity of oriental sweetgum oil. The acetylcholinesterase (AChE) inhibition activity of two oils and their constituents was tested to determine their mode of action. Only cis-ocimene showed strong AChE inhibition activity with an IC50 value of 0.131 mg/mL. Further studies are warranted to determine the potential of these essential oils and their constituents as fumigants for termite control.

  14. Fumigant Toxicity of Oriental Sweetgum (Liquidambar orientalis and Valerian (Valeriana wallichii Essential Oils and Their Components, Including Their Acetylcholinesterase Inhibitory Activity, against Japanese Termites (Reticulitermes speratus

    Directory of Open Access Journals (Sweden)

    Il-Kwon Park

    2014-08-01

    Full Text Available This study investigated the fumigant toxicity of oriental sweetgum (Liquidambar orientalis and valerian (Valeriana wallichii essential oils and their components against the Japanese termite (Reticulitermes speratus. The fumigant toxicity of oriental sweetgum and valerian oil differed significantly according to exposure time. Oriental sweetgum showed toxicity at short exposure times (2 days, and the toxicity of valerian oil was high 7 days after treatment. The main constituents of oriental sweetgum and valerian oils were tested individually for their fumigant toxicity against Japanese termites. Among the test compounds, benzyl alcohol, acetophenone, 1-phenyl-1-ethanol, hydrocinnamyl alcohol, trans-cinnamyl aldehyde, trans-cinnamyl alcohol, cis-asarone, styrene, and cis-ocimene showed toxicity against Japanese termites 7 days after treatment. Hydrocinnamyl alcohol and trans-cinnamyl alcohol were found to be the major contributors to the fumigant antitermitic toxicity of oriental sweetgum oil. The acetylcholinesterase (AChE inhibition activity of two oils and their constituents was tested to determine their mode of action. Only cis-ocimene showed strong AChE inhibition activity with an IC50 value of 0.131 mg/mL. Further studies are warranted to determine the potential of these essential oils and their constituents as fumigants for termite control.

  15. Changes in the physicochemical characteristics, including flavour components and Maillard reaction products, of non-centrifugal cane brown sugar during storage.

    Science.gov (United States)

    Asikin, Yonathan; Kamiya, Asahiro; Mizu, Masami; Takara, Kensaku; Tamaki, Hajime; Wada, Koji

    2014-04-15

    Changes in the quality attributes of non-centrifugal cane brown sugar represented by physicochemical characteristics as well as flavour components and Maillard reaction products (MRPs) were monitored every 3 months over 1 year of storage. Stored cane brown sugar became darker, and its moisture content and water activity (a(w)) increased during storage. Fructose and glucose levels decreased as non-enzymatic browning via the Maillard reaction occurred in the stored sample, and a similar trend was also discovered in aconitic and acetic acids. Stored cane brown sugar lost its acidic and sulfuric odours (58.70-39.35% and 1.85-0.08%, respectively); subsequently, the nutty and roasted aroma increased from 26.52% to 38.59% due to the volatile MRPs. The browning rate of stored cane brown sugar was positively associated with the development of volatile MRPs (Pearson's coefficient = 0.860), whereas the amount of 3-deoxyglucosone, an intermediate product of the Maillard reaction, had a lower association with the brown colour due to its relatively slow degradation rate. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Cytogenetic analyses of eight species in the genus Leptodactylus Fitzinger, 1843 (Amphibia, Anura, Leptodactylidae), including a new diploid number and a karyotype with multiple translocations

    Science.gov (United States)

    2012-01-01

    Background The karyotypes of Leptodactylus species usually consist of 22 bi-armed chromosomes, but morphological variations in some chromosomes and even differences in the 2n have been reported. To better understand the mechanisms responsible for these differences, eight species were analysed using classical and molecular cytogenetic techniques, including replication banding with BrdU incorporation. Results Distinct chromosome numbers were found: 2n = 22 in Leptodactylus chaquensis, L. labyrinthicus, L. pentadactylus, L. petersii, L. podicipinus, and L. rhodomystax; 2n = 20 in Leptodactylus sp. (aff. podicipinus); and 2n = 24 in L. marmoratus. Among the species with 2n = 22, only three had the same basic karyotype. Leptodactylus pentadactylus presented multiple translocations, L. petersii displayed chromosome morphological discrepancy, and L. podicipinus had four pairs of telocentric chromosomes. Replication banding was crucial for characterising this variability and for explaining the reduced 2n in Leptodactylus sp. (aff. podicipinus). Leptodactylus marmoratus had few chromosomes with a similar banding patterns to the 2n = 22 karyotypes. The majority of the species presented a single NOR-bearing pair, which was confirmed using Ag-impregnation and FISH with an rDNA probe. In general, the NOR-bearing chromosomes corresponded to chromosome 8, but NORs were found on chromosome 3 or 4 in some species. Leptodactylus marmoratus had NORs on chromosome pairs 6 and 8. The data from C-banding, fluorochrome staining, and FISH using the telomeric probe helped in characterising the repetitive sequences. Even though hybridisation did occur on the chromosome ends, telomere-like repetitive sequences outside of the telomere region were identified. Metaphase I cells from L. pentadactylus confirmed its complex karyotype constitution because 12 chromosomes appeared as ring-shaped chain in addition to five bivalents. Conclusions Species of Leptodactylus exhibited both major and minor

  17. Complex adaptive responses during antagonistic coevolution between Tribolium castaneum and its natural parasite Nosema whitei revealed by multiple fitness components

    Directory of Open Access Journals (Sweden)

    Bérénos Camillo

    2012-01-01

    Full Text Available Abstract Background Host-parasite coevolution can lead to local adaptation of either parasite or host if there is specificity (GxG interactions and asymmetric evolutionary potential between host and parasite. This has been demonstrated both experimentally and in field studies, but a substantial proportion of studies fail to detect such clear-cut patterns. One explanation for this is that adaptation can be masked by counter-adaptation by the antagonist. Additionally, genetic architecture underlying the interaction is often highly complex thus preventing specific adaptive responses. Here, we have employed a reciprocal cross-infection experiment to unravel the adaptive responses of two components of fitness affecting both parties with different complexities of the underlying genetic architecture (i.e. mortality and spore load. Furthermore, our experimental coevolution of hosts (Tribolium castaneum and parasites (Nosema whitei included paired replicates of naive hosts from identical genetic backgrounds to allow separation between host- and parasite-specific responses. Results In hosts, coevolution led to higher resistance and altered resistance profiles compared to paired control lines. Host genotype × parasite genotype interactions (GH × GP were observed for spore load (the trait of lower genetic complexity, but not for mortality. Overall parasite performance correlated with resistance of its matching host coevolution background reflecting a directional and unspecific response to strength of selection during coevolution. Despite high selective pressures exerted by the obligatory killing parasite, and host- and parasite-specific mortality profiles, no general pattern of local adaptation was observed, but one case of parasite maladaptation was consistently observed on both coevolved and control host populations. In addition, the use of replicate control host populations in the assay revealed one case of host maladaptation and one case of parasite

  18. Effects of Students' Multiple Intelligences on Participation Rate of Course Components in a Blended Secondary Family and Consumer Sciences Course

    Science.gov (United States)

    Devlin, Breanne M.

    2010-01-01

    This study investigated students' learning style participation rate within a blended Family and Consumer Sciences Exploring Childhood constructivist secondary course using an exploratory quantitative approach with descriptive analysis, ANOVA testing, and contingency tables. Howard Gardner's multiple intelligence inventory was used to determine…

  19. Polyploidy as a chromosomal component of stochastic noise: variable scalar multiples of the diploid chromosome complement in the invertebrate species Girardia schubarti from Brazil

    Directory of Open Access Journals (Sweden)

    E. G. F. Benya

    2017-06-01

    Full Text Available Abstract Chromosome stoichiometry, a form of genetic plasticity, specifically refers to variation in the standard diploid genomic composition of an individual or species. In the present work, freshwater planarians (Girardia schubarti were analyzed to recognize variations in chromosomal stoichiometry especially of complete ploidal change between specimens, within specimens and between cells within specimens and any relations they might have with selected components of phenotypic plasticity. Homoploid polyploids for the group reached rational scalar multiples (e.g. tetraploids or irrational scalar multiples (e.g. triploids. Karyotypic mosaics emerged where individual cells presented polyploid multiples in arithmetic and geometric progressions. Ploidal multiplicity, a chromosomal component of stochastic noise, had positive phenotypic effects (increased dimensions on morphologic criteria of body length, body width and dorsal surface reflecting a significant genotypic plasticity (GP and robust phenotypic plasticity (PP. Variable but significant association of genotypic plasticity with robust phenotypic variance suggests kinetics of phenotypic homeostasis that is species-specific permitting phenotypic adaptability to environmental variables by means of GP. That association is diminished, deactivated or lost in more advanced and more complex organisms.

  20. Improved long-term expression from helper virus-free HSV-1 vectors packaged using combinations of mutated HSV-1 proteins that include the UL13 protein kinase and specific components of the VP16 transcriptional complex

    Directory of Open Access Journals (Sweden)

    Geller Alfred I

    2009-06-01

    Full Text Available Abstract Background Herpes Simplex Virus (HSV-1 gene expression is thought to shut off recombinant gene expression from HSV-1 vectors; however, in a helper virus-free HSV-1 vector system, a number of promoters support only short-term expression. These results raise the paradox that recombinant gene expression remains short-term even in the absence of almost all (~99% of the HSV-1 genome, HSV-1 genes, and HSV-1 gene expression. To resolve this paradox, we hypothesized that specific proteins in the HSV-1 virus particle shut off recombinant gene expression. In two earlier studies, we examined the effects on recombinant gene expression of packaging vectors using specific mutated HSV-1 proteins. We found that vectors packaged using mutated UL13 (a protein kinase, or VP16, or UL46 and/or UL47 (components of the VP16 transcriptional complex supported improved long-term expression, and vectors packaged using mutated UL46 and/or UL47 also supported improved gene transfer (numbers of cells at 4 days. These results suggested the hypothesis that specific proteins in the HSV-1 particle act by multiple pathways to reduce recombinant gene expression. To test this hypothesis, we examined combinations of mutated proteins that included both UL13 and specific components of the VP16 transcriptional complex. Results A HSV-1 vector containing a neuronal-specific promoter was packaged using specific combinations of mutated proteins, and the resulting vector stocks were tested in the rat striatum. For supporting long-term expression, the preferred combination of mutated HSV-1 proteins was mutated UL13, UL46, and UL47. Vectors packaged using this combination of mutated proteins supported a higher efficiency of gene transfer and high levels expression for 3 months, the longest time examined. Conclusion Vector particles containing this combination of mutated HSV-1 proteins improve recombinant gene expression. Implications of these results for strategies to further improve

  1. Improved long-term expression from helper virus-free HSV-1 vectors packaged using combinations of mutated HSV-1 proteins that include the UL13 protein kinase and specific components of the VP16 transcriptional complex.

    Science.gov (United States)

    Liu, Meng; Wang, Xiaodan; Geller, Alfred I

    2009-06-16

    Herpes Simplex Virus (HSV-1) gene expression is thought to shut off recombinant gene expression from HSV-1 vectors; however, in a helper virus-free HSV-1 vector system, a number of promoters support only short-term expression. These results raise the paradox that recombinant gene expression remains short-term even in the absence of almost all (approximately 99%) of the HSV-1 genome, HSV-1 genes, and HSV-1 gene expression. To resolve this paradox, we hypothesized that specific proteins in the HSV-1 virus particle shut off recombinant gene expression. In two earlier studies, we examined the effects on recombinant gene expression of packaging vectors using specific mutated HSV-1 proteins. We found that vectors packaged using mutated UL13 (a protein kinase), or VP16, or UL46 and/or UL47 (components of the VP16 transcriptional complex) supported improved long-term expression, and vectors packaged using mutated UL46 and/or UL47 also supported improved gene transfer (numbers of cells at 4 days). These results suggested the hypothesis that specific proteins in the HSV-1 particle act by multiple pathways to reduce recombinant gene expression. To test this hypothesis, we examined combinations of mutated proteins that included both UL13 and specific components of the VP16 transcriptional complex. A HSV-1 vector containing a neuronal-specific promoter was packaged using specific combinations of mutated proteins, and the resulting vector stocks were tested in the rat striatum. For supporting long-term expression, the preferred combination of mutated HSV-1 proteins was mutated UL13, UL46, and UL47. Vectors packaged using this combination of mutated proteins supported a higher efficiency of gene transfer and high levels expression for 3 months, the longest time examined. Vector particles containing this combination of mutated HSV-1 proteins improve recombinant gene expression. Implications of these results for strategies to further improve long-term expression are discussed

  2. Distinguishing active from passive components of ankle plantar flexor stiffness in stroke, spinal cord injury and multiple sclerosis

    DEFF Research Database (Denmark)

    Lorentzen, Jakob; Grey, Michael James; Crone, Clarissa

    2010-01-01

    to distinguish the contribution of active reflex mechanisms from passive muscle properties to ankle joint stiffness in 31 healthy, 10 stroke, 30 multiple sclerosis and 16 spinal cord injured participants. The results were compared to routine clinical evaluation of spasticity. METHODS: A computer......-controlled robotic device applied stretches to the ankle plantar flexor muscles at different velocities (8-200deg/s; amplitude 6 degrees ). The reflex threshold was determined by soleus EMG. Torque and EMG data were normalized to the maximal torque and EMG evoked by supramaximal stimulation of the tibial nerve...

  3. Plasticity of floral longevity and floral display in the self-compatible biennial Sabatia angularis (Gentianaceae): untangling the role of multiple components of pollination.

    Science.gov (United States)

    Spigler, Rachel B

    2017-01-01

    Plasticity of floral traits in response to pollination can enable plants to maximize opportunities for pollen import and export under poor pollination conditions, while minimizing costs under favourable ones. Both floral longevity and display are key traits influencing pollination. While pollination-induced flower wilting is widely documented, we lack an understanding of the multifactorial complexity of this response, including the influence of other pollination components, costs of extended longevity and subsequent impacts on floral display. Plasticity of floral longevity was experimentally evaluated in Sabatia angularis in response to multiple pollination factors: pollen addition, removal, and source (self, single-donor outcross, multiple-donor outcross) and timing of pollination. Effects of pollen quantity were further evaluated by exploiting variation in autonomous self-pollen deposition. Delayed pollination costs were tested comparing seed set from early versus late pollinations. Finally, I compared floral display metrics (peak floral display, time to peak flower, flowering duration, mean flowering rate) between experimentally pollinated and control plants. Floral longevity was highly plastic in response to pollen addition and its timing, and the response was dose-dependent but insensitive to pollen source. Pollen removal tended to extend floral longevity, but only insofar as it precluded pollination-induced wilting via autonomous self-pollination. Under delayed pollination, the wilting response was faster and no cost was detected. Pollination further led to reduced peak floral displays and condensed flowering periods. Floral longevity and display plasticity could optimize fitness in S. angularis, a species prone to pollen limitation and high inbreeding depression. Under pollinator scarcity, extended floral longevities offer greater opportunities for pollen receipt and export at no cost to seed set, reproductive assurance via autonomous self-pollination and

  4. Simultaneous Determination of Multiple Components in Guanjiekang in Rat Plasma via the UPLC–MS/MS Method and Its Application in Pharmacokinetic Study

    Directory of Open Access Journals (Sweden)

    Jian Wu

    2016-12-01

    Full Text Available Guanjiekang (GJK that is formed by five medicinal herbs including Astragali Radix, Aconiti Lateralis Radix Praeparaia, Glycyrrhizae Radix et Rhizoma, Corydalis Rhizoma and Paeoniae Radix Alba was used for the treatment of rheumatoid arthritis (RA. However, the pharmacokinetic (PK profile of active components in GJK remains unclear. This study aims to evaluate the pharmacokinetic behavior of seven representative active constituents in GJK (i.e., benzoylhypaconine, benzoylmesaconine, paeoniflorin, tetrahydropalmatine, calycosin-7-glucoside, formononetin and isoliquiritigenin after oral administration of GJK in rats. A rapid, sensitive and reliable ultra-performance liquid chromatography-tandem mass spectrometer (UPLC–MS/MS method has been successfully developed for the simultaneous determination of these seven constituents in rat plasma. Chromatographic separation was achieved on a C18 column with a gradient elution program that consists of acetonitrile and water (containing 0.1% formic acid at a flow rate of 0.35 mL/min. Detection was performed under the multiple reaction monitoring (MRM in the positive electrospray ionization (ESI mode. The calibration curves exhibited good linearity (R2 > 0.99 over a wide concentration range for all constituents. The accuracies ranged from 92.9% to 107.8%, and the intra-day and inter-day precisions at three different levels were below 15%. Our PK results showed that these seven compounds were quickly absorbed after the administration of the GJK product, and Tmax ranged from 30 min to 189 min. The in vivo concentrations of paeoniflorin and isoliquiritigenin were significantly higher than the reported in vitro effective doses, indicating that they could partly contribute to the therapeutic effect of GJK. Therefore, we conclude that pharmacokinetic studies of representative bioactive chemicals after administration of complex herbal products are not only necessary but also feasible. Moreover, these seven

  5. The Multivariate Regression Statistics Strategy to Investigate Content-Effect Correlation of Multiple Components in Traditional Chinese Medicine Based on a Partial Least Squares Method.

    Science.gov (United States)

    Peng, Ying; Li, Su-Ning; Pei, Xuexue; Hao, Kun

    2018-03-01

    Amultivariate regression statisticstrategy was developed to clarify multi-components content-effect correlation ofpanaxginseng saponins extract and predict the pharmacological effect by components content. In example 1, firstly, we compared pharmacological effects between panax ginseng saponins extract and individual saponin combinations. Secondly, we examined the anti-platelet aggregation effect in seven different saponin combinations of ginsenoside Rb1, Rg1, Rh, Rd, Ra3 and notoginsenoside R1. Finally, the correlation between anti-platelet aggregation and the content of multiple components was analyzed by a partial least squares algorithm. In example 2, firstly, 18 common peaks were identified in ten different batches of panax ginseng saponins extracts from different origins. Then, we investigated the anti-myocardial ischemia reperfusion injury effects of the ten different panax ginseng saponins extracts. Finally, the correlation between the fingerprints and the cardioprotective effects was analyzed by a partial least squares algorithm. Both in example 1 and 2, the relationship between the components content and pharmacological effect was modeled well by the partial least squares regression equations. Importantly, the predicted effect curve was close to the observed data of dot marked on the partial least squares regression model. This study has given evidences that themulti-component content is a promising information for predicting the pharmacological effects of traditional Chinese medicine.

  6. The Multivariate Regression Statistics Strategy to Investigate Content-Effect Correlation of Multiple Components in Traditional Chinese Medicine Based on a Partial Least Squares Method

    Directory of Open Access Journals (Sweden)

    Ying Peng

    2018-03-01

    Full Text Available Amultivariate regression statisticstrategy was developed to clarify multi-components content-effect correlation ofpanaxginseng saponins extract and predict the pharmacological effect by components content. In example 1, firstly, we compared pharmacological effects between panax ginseng saponins extract and individual saponin combinations. Secondly, we examined the anti-platelet aggregation effect in seven different saponin combinations of ginsenoside Rb1, Rg1, Rh, Rd, Ra3 and notoginsenoside R1. Finally, the correlation between anti-platelet aggregation and the content of multiple components was analyzed by a partial least squares algorithm. In example 2, firstly, 18 common peaks were identified in ten different batches of panax ginseng saponins extracts from different origins. Then, we investigated the anti-myocardial ischemia reperfusion injury effects of the ten different panax ginseng saponins extracts. Finally, the correlation between the fingerprints and the cardioprotective effects was analyzed by a partial least squares algorithm. Both in example 1 and 2, the relationship between the components content and pharmacological effect was modeled well by the partial least squares regression equations. Importantly, the predicted effect curve was close to the observed data of dot marked on the partial least squares regression model. This study has given evidences that themulti-component content is a promising information for predicting the pharmacological effects of traditional Chinese medicine.

  7. Membrane and core periplasmic Agrobacterium tumefaciens virulence Type IV secretion system components localize to multiple sites around the bacterial perimeter during lateral attachment to plant cells.

    Science.gov (United States)

    Aguilar, Julieta; Cameron, Todd A; Zupan, John; Zambryski, Patricia

    2011-01-01

    Type IV secretion systems (T4SS) transfer DNA and/or proteins into recipient cells. Here we performed immunofluorescence deconvolution microscopy to localize the assembled T4SS by detection of its native components VirB1, VirB2, VirB4, VirB5, VirB7, VirB8, VirB9, VirB10, and VirB11 in the C58 nopaline strain of Agrobacterium tumefaciens, following induction of virulence (vir) gene expression. These different proteins represent T4SS components spanning the inner membrane, periplasm, or outer membrane. Native VirB2, VirB5, VirB7, and VirB8 were also localized in the A. tumefaciens octopine strain A348. Quantitative analyses of the localization of all the above Vir proteins in nopaline and octopine strains revealed multiple foci in single optical sections in over 80% and 70% of the bacterial cells, respectively. Green fluorescent protein (GFP)-VirB8 expression following vir induction was used to monitor bacterial binding to live host plant cells; bacteria bind predominantly along their lengths, with few bacteria binding via their poles or subpoles. vir-induced attachment-defective bacteria or bacteria without the Ti plasmid do not bind to plant cells. These data support a model where multiple vir-T4SS around the perimeter of the bacterium maximize effective contact with the host to facilitate efficient transfer of DNA and protein substrates. Transfer of DNA and/or proteins to host cells through multiprotein type IV secretion system (T4SS) complexes that span the bacterial cell envelope is critical to bacterial pathogenesis. Early reports suggested that T4SS components localized at the cell poles. Now, higher-resolution deconvolution fluorescence microscopy reveals that all structural components of the Agrobacterium tumefaciens vir-T4SS, as well as its transported protein substrates, localize to multiple foci around the cell perimeter. These results lead to a new model of A. tumefaciens attachment to a plant cell, where A. tumefaciens takes advantage of the multiple

  8. Study of laser-induced damage on the exit surface of silica components in the nanosecond regime in a multiple wavelengths configuration

    International Nuclear Information System (INIS)

    Chambonneau, Maxime

    2014-01-01

    In this thesis, laser-induced damage phenomenon on the surface of fused silica components is investigated in the nanosecond regime. This phenomenon consists in an irreversible modification of the material. In the nanosecond regime, laser damage is tightly correlated to the presence of non-detectable precursor defects which are a consequence of the synthesis and the polishing of the components. In this thesis, we investigate laser damage in a multiple wavelengths configuration. In order to better understand this phenomenon in these conditions of irradiation, three studies are conducted. The first one focuses on damage initiation. The results obtained in the single wavelength configurations highlight a coupling in the multiple wavelengths one. A comparison between the experiments and a model developed during this thesis enables us to improve the knowledge of the fundamental processes involved during this damage phase. Then, we show that post mortem characterizations of damage morphology coupled to an accurate metrology allow us to understand both the nature and also the chronology of the physical mechanisms involved during damage formation. The proposed theoretical scenario is confirmed through various experiments. Finally, we study damage growth in both the single and the multiple wavelengths cases. Once again, this last configuration highlights a coupling between the wavelengths. We show the necessity to account for the spatial characteristics of the laser beams during a growth session. (author) [fr

  9. Urbanization-induced habitat fragmentation erodes multiple components of temporal diversity in a Southern California native bee assemblage.

    Science.gov (United States)

    Hung, Keng-Lou James; Ascher, John S; Holway, David A

    2017-01-01

    Despite a large number of ecological studies that document diversity loss resulting from anthropogenic disturbance, surprisingly few consider how disturbance affects temporal patterns of diversity that result from seasonal turnover of species. Temporal dynamics can play an important role in the structure and function of biological assemblages. Here, we investigate the temporal diversity patterns of bee faunas in Southern California coastal sage scrub ecosystems that have been extensively fragmented by urbanization. Using a two-year dataset of 235 bee species (n = 12,036 specimens), we compared 1-ha plots in scrub fragments and scrub reserves with respect to three components of temporal diversity: overall plot-level diversity pooled over time (temporal gamma diversity), diversity at discrete points in time (temporal alpha diversity), and seasonal turnover in assemblage composition (temporal beta diversity). Compared to reserves, fragments harbored bee assemblages with lower species richness and assemblage evenness both when summed across temporal samples (i.e., lower temporal gamma diversity) and at single points in time (i.e., lower temporal alpha diversity). Bee assemblages in fragments also exhibited reduced seasonal turnover (i.e., lower temporal beta diversity). While fragments and reserves did not differ in overall bee abundance, bee abundance in fragments peaked later in the season compared to that in reserves. Our results argue for an increased awareness of temporal diversity patterns, as information about the distinct components of temporal diversity is essential both for characterizing the assemblage dynamics of seasonal organisms and for identifying potential impacts of anthropogenic disturbance on ecosystem function through its effects on assemblage dynamics.

  10. An Earth Observation Land Data Assimilation System for Data from Multiple Wavelength Domains: Water and Energy Balance Components

    Science.gov (United States)

    Quaife, T. L.; Davenport, I. J.; Lines, E.; Styles, J.; Lewis, P.; Gurney, R. J.

    2012-12-01

    Satellite observations offer a spatially and temporally synoptic data source for constraining models of land surface processes, but exploitation of these data for such purposes has been largely ad-hoc to date. In part this is because traditional land surface models, and hence most land surface data assimilation schemes, have tended to focus on a specific component of the land surface problem; typically either surface fluxes of water and energy or biogeochemical cycles such as carbon and nitrogen. Furthermore the assimilation of satellite data into such models tends to be restricted to a single wavelength domain, for example passive microwave, thermal or optical, depending on the problem at hand. The next generation of land surface schemes, such as the Joint UK Land Environment Simulator (JULES) and the US Community Land Model (CLM) represent a broader range of processes but at the expense of increasing overall model complexity and in some cases reducing the level of detail in specific processes to accommodate this. Typically, the level of physical detail used to represent the interaction of electromagnetic radiation with the surface is not sufficient to enable prediction of intrinsic satellite observations (reflectance, brightness temperature and so on) and consequently these are not assimilated directly into the models. A seemingly attractive alternative is to assimilate high-level products derived from satellite observations but these are often only superficially related to the corresponding variables in land surface models due to conflicting assumptions between the two. This poster describes the water and energy balance modeling components of a project funded by the European Space Agency to develop a data assimilation scheme for the land surface and observation operators to translate between models and the intrinsic observations acquired by satellite missions. The rationale behind the design of the underlying process model is to represent the physics of the

  11. Extraction of chemical information of suspensions using radiative transfer theory to remove multiple scattering effects: application to a model two-component system.

    Science.gov (United States)

    Steponavicius, Raimundas; Thennadil, Suresh N

    2009-09-15

    An approach for removing multiple light scattering effects using the radiative transfer theory (RTE) in order to improve the performance of multivariate calibration models is proposed. This approach is then applied to the problem of building calibration models for predicting the concentration of a scattering (particulate) component. Application of this approach to a simulated four component system showed that it will lead to calibration models which perform appreciably better than when empirically scatter corrected measurements of diffuse transmittance (T(d)) or reflectance (R(d)) are used. The validity of the method was also tested experimentally using a two-component (polystyrene-water) system. While the proposed method led to a model that performed better than the one built using R(d), its performance was worse compared to when T(d) measurements were used. Analysis indicates that this is because the model built using T(d) benefits from the strong secondary correlation between particle concentration and path length traveled by the photons which occurs due to the system containing only two components. On the other hand, the model arising from the proposed methodology uses essentially only the chemical (polystyrene) signal. Thus, this approach can be expected to work better in multicomponent systems where the path length correlation would not exist.

  12. Factorial structure of the 'ToM Storybooks': A test evaluating multiple components of Theory of Mind.

    Science.gov (United States)

    Bulgarelli, Daniela; Testa, Silvia; Molina, Paola

    2015-06-01

    This study examined the factorial structure of the Theory of Mind (ToM) Storybooks, a comprehensive 93-item instrument tapping the five components in Wellman's model of ToM (emotion recognition, understanding of desire and beliefs, ability to distinguish between physical and mental entities, and awareness of the link between perception and knowledge). A sample of 681 three- to eight-year-old Italian children was divided into three age groups to assess whether factorial structure varied across different age ranges. Partial credit model analysis was applied to the data, leading to the empirical identification of 23 composite variables aggregating the ToM Storybooks items. Confirmatory factor analysis was then conducted on the composite variables, providing support for the theoretical model. There were partial differences in the specific composite variables making up the dimensions for each of the three age groups. A single test evaluating distinct dimensions of ToM is a valuable resource for clinical practice which may be used to define differential profiles for specific populations. © 2014 The British Psychological Society.

  13. Bowen emission from Aquila X-1: evidence for multiple components and constraint on the accretion disc vertical structure

    Science.gov (United States)

    Jiménez-Ibarra, F.; Muñoz-Darias, T.; Wang, L.; Casares, J.; Mata Sánchez, D.; Steeghs, D.; Armas Padilla, M.; Charles, P. A.

    2018-03-01

    We present a detailed spectroscopic study of the optical counterpart of the neutron star X-ray transient Aquila X-1 during its 2011, 2013 and 2016 outbursts. We use 65 intermediate resolution GTC-10.4 m spectra with the aim of detecting irradiation-induced Bowen blend emission from the donor star. While Gaussian fitting does not yield conclusive results, our full phase coverage allows us to exploit Doppler mapping techniques to independently constrain the donor star radial velocity. By using the component N III 4640.64/4641.84 Å, we measure Kem = 102 ± 6 km s-1. This highly significant detection (≳13σ) is fully compatible with the true companion star radial velocity obtained from near-infrared spectroscopy during quiescence. Combining these two velocities we determine, for the first time, the accretion disc opening angle and its associated error from direct spectroscopic measurements and detailed modelling, obtaining α = 15.5 ^{+ 2.5}_{-5} deg. This value is consistent with theoretical work if significant X-ray irradiation is taken into account and is important in the light of recent observations of GX339-4, where discrepant results were obtained between the donor's intrinsic radial velocity and the Bowen-inferred value. We also discuss the limitations of the Bowen technique when complete phase coverage is not available.

  14. Identification of a Novel Androgen Receptor Mutation in a Family With Multiple Components Compatible With the Testicular Dysgenesis Syndrome

    DEFF Research Database (Denmark)

    Lottrup, Grete; Jørgensen, Anne; Nielsen, John E.

    2013-01-01

    showed features consistent with insufficient testis development and TDS.Conclusion: The presence of all hallmarks of TDS, including germ cell cancer, in a family with a novel AR mutation causing a partial decrease in AR function is in line with the concept that reduced androgen signaling may contribute......Context: Androgen signaling via the androgen receptor (AR) is essential for normal testis development and male reproductive functions. We describe a rare family with 3 males affected by a mild disorder of sex determination compatible with testicular dysgenesis syndrome (TDS), including subfertility.......Participants: The proband, his first cousin, and a nephew underwent a detailed clinical investigation including genetic tests, whereas four female members of the family were tested for the specific AR mutation.Results: A novel AR mutation, c.2214T>G;p.Ile738Met, was identified in the affected family members. Functional...

  15. Purified Cannabidiol, the main non-psychotropic component of Cannabis sativa, alone, counteracts neuronal apoptosis in experimental multiple sclerosis.

    Science.gov (United States)

    Giacoppo, S; Soundara Rajan, T; Galuppo, M; Pollastro, F; Grassi, G; Bramanti, P; Mazzon, E

    2015-12-01

    Multiple Sclerosis (MS) is a global concern disease leading to a progressive, chronic and demyelinating condition, affecting the central nervous system (CNS). The pathology has an inflammatory/autoimmune origin; nevertheless, neuronal cell death mechanisms are not to be underestimated. The present study was designed to test the effects of intraperitoneal administration of cannabidiol (CBD), the main non-psychotropic cannabinoid of Cannabis sativa (CS), in an experimental model of MS. The aim is to evaluate the capability of CBD administration to thwart the cascade of mediators involved in MS-induced apoptosis. Experimental Autoimmune Encephalomyelitis (EAE) was induced by immunization with myelin oligodendroglial glycoprotein (MOG)35-55 peptide in mice. After immunization, mice were observed daily for signs of EAE and weight loss. Disease signs were evaluated using a standardized scoring system. Immunohistochemical and Western blot assessments of key apoptotic markers reveal that CBD treatment is able to avoid Fas pathway activation, phospho-ERK p42/44 and cleaved caspase-3 triggering as well as alterations in mitochondrial permeability due to Bax/Bcl-2 unbalance. Moreover, CBD interferes with p53-p21 axis activation. As results, the absence of tissue apobody formation in spinal cord tissues of EAE-mice treated with CBD was established. Most of therapeutic properties of CS are currently ascribed to the psychotropic effects of phenylterpenoid delta-9 tetrahydrocannabinol. We have demonstrated that, alone, purified CBD possesses an anti-apoptotic power against the neurodegenerative processes underlying MS development. This represents an interesting new profile of CBD that could lead to its introduction in the clinical management of MS.

  16. Assessment of multiple barrier system components for waste isolation in near surface disposal facilities. Appendix 9: India

    International Nuclear Information System (INIS)

    Bansal, N.K.; Wattal, P.K.; Satya, B.; Gabriel, J.; Surendranath, M.V.

    2001-01-01

    Naturally occurring backfill materials studied and characterised included vermiculite, bentonite, attapulgite and clayey soils from different sources within India. Apart from physico-chemical characterization, studies included radionuclide sorption behaviour of the backfill materials and their desorption in groundwater. While adequacy of Ordinary Portland Cement (OPC) for immobilisation of low level waste is well established, several new cement blends were specially formulated and tested to be compatible for intermediate level waste. These wastes are highly alkaline and had higher salt loading especially nitrates and nitrites. Screening of these formulations was carried out to select the most promising formulations which were further subjected to detailed investigations with respect to physico-chemical characteristics and long term leach behaviour. At the time of the CRP, various methods were under study for the top sealing/closure of trenches after disposal of waste. These included natural soils, reinforced cement concrete slabs in combination with cement mortar and brick-bat-coba, crevice sealing materials like bitumen, polymer, cement grouts etc

  17. Report of Increasing Overdose Deaths that include Acetyl Fentanyl in Multiple Counties of the Southwestern Region of the Commonwealth of Pennsylvania in 2015-2016.

    Science.gov (United States)

    Dwyer, Jessica B; Janssen, Jennifer; Luckasevic, Todd M; Williams, Karl E

    2018-01-01

    Acetyl fentanyl is a Schedule I controlled synthetic opioid that is becoming an increasingly detected "designer drug." Routine drug screening procedures in local forensic toxicology laboratories identified a total of 41 overdose deaths associated with acetyl fentanyl within multiple counties of the southwestern region of the state of Pennsylvania. The range, median, mean, and standard deviation of blood acetyl fentanyl concentrations for these 41 cases were 0.13-2100 ng/mL, 11 ng/mL, 169.3 ng/mL, and 405.3 ng/mL, respectively. Thirty-six individuals (88%) had a confirmed history of substance abuse, and all but one case (96%) were ruled multiple drug toxicities. This report characterizes this localized trend of overdose deaths associated with acetyl fentanyl and provides further evidence supporting an alarmingly concentrated opiate and opioid epidemic of both traditional and novel drugs within this region of the United States. © 2017 American Academy of Forensic Sciences.

  18. Principal Component Analysis in Grey Based Taguchi Method for Optimization of Multiple Surface Quality Characteristics of 6061-T4 Aluminum in CNC End Milling

    Science.gov (United States)

    Datta, Saurav; Routara, Bharat Chandra; Bandyopadhyay, Asish; Mahapatra, Siba Sankar

    2011-01-01

    The present study highlights a multi-objective optimization problem by applying Principal Component Analysis (PCA) coupled with grey based Taguchi method through a case study in CNC end milling of 6061-T4 Aluminum. The study aimed at evaluating the best process environment which could simultaneously satisfy multiple requirements of surface quality. In view of the fact, that traditional Taguchi method cannot solve a multi-objective optimization problem; to overcome this limitation, grey relation theory has been coupled with Taguchi method. Furthermore, to follow the basic assumption of Taguchi method i.e. quality attributes should be uncorrelated or independent; which is not always satisfied in practical situation. To overcome this shortcoming the study applied Principal Component analysis to eliminate response correlation and to evaluate independent or uncorrelated quality indices called Principal Components which were aggregated to compute an overall quality index denoted as overall grey relational grade which was optimized (minimized) finally. The study combined PCA and grey based Taguchi method for predicting optimal setting. Optimal result was verified through confirmatory test.

  19. Other components

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This chapter includes descriptions of electronic and mechanical components which do not merit a chapter to themselves. Other hardware requires mention because of particularly high tolerance or intolerance of exposure to radiation. A more systematic analysis of radiation responses of structures which are definable by material was given in section 3.8. The components discussed here are field effect transistors, transducers, temperature sensors, magnetic components, superconductors, mechanical sensors, and miscellaneous electronic components

  20. Improving anxiety regulation in patients with breast cancer at the beginning of the survivorship period: a randomized clinical trial comparing the benefits of single-component and multiple-component group interventions.

    Science.gov (United States)

    Merckaert, Isabelle; Lewis, Florence; Delevallez, France; Herman, Sophie; Caillier, Marie; Delvaux, Nicole; Libert, Yves; Liénard, Aurore; Nogaret, Jean-Marie; Ogez, David; Scalliet, Pierre; Slachmuylder, Jean-Louis; Van Houtte, Paul; Razavi, Darius

    2017-08-01

    To compare in a multicenter randomized controlled trial the benefits in terms of anxiety regulation of a 15-session single-component group intervention (SGI) based on support with those of a 15-session multiple-component structured manualized group intervention (MGI) combining support with cognitive-behavioral and hypnosis components. Patients with nonmetastatic breast cancer were randomly assigned at the beginning of the survivorship period to the SGI (n = 83) or MGI (n = 87). Anxiety regulation was assessed, before and after group interventions, through an anxiety regulation task designed to assess their ability to regulate anxiety psychologically (anxiety levels) and physiologically (heart rates). Questionnaires were used to assess psychological distress, everyday anxiety regulation, and fear of recurrence. Group allocation was computer generated and concealed till baseline completion. Compared with patients in the SGI group (n = 77), patients attending the MGI group (n = 82) showed significantly reduced anxiety after a self-relaxation exercise (P = .006) and after exposure to anxiety triggers (P = .013) and reduced heart rates at different time points throughout the task (P = .001 to P = .047). The MGI participants also reported better everyday anxiety regulation (P = .005), greater use of fear of recurrence-related coping strategies (P = .022), and greater reduction in fear of recurrence-related psychological distress (P = .017) compared with the SGI group. This study shows that an MGI combining support with cognitive-behavioral techniques and hypnosis is more effective than an SGI based only on support in improving anxiety regulation in patients with breast cancer. Copyright © 2016 John Wiley & Sons, Ltd.

  1. A structured review of chronic care model components supporting transition between healthcare service delivery types for older people with multiple chronic diseases.

    Science.gov (United States)

    Sendall, Marguerite; McCosker, Laura; Crossley, Kristie; Bonner, Ann

    2017-05-01

    Older people with chronic diseases often have complex and interacting needs and require treatment and care from a wide range of professionals and services concurrently. This structured review will identify the components of the chronic care model (CCM) required to support healthcare that transitions seamlessly between hospital and ambulatory settings for people over 65 years of age who have two or more chronic diseases. A structured review was conducted by searching six electronic databases combining the terms 'hospital', 'ambulatory', 'elderly', 'chronic disease' and 'integration/seamless'. Four articles meeting the inclusion criteria were included in the review. Study setting, objectives, design, population, intervention, CCM components, outcomes and results were extracted and a process of descriptive synthesis applied. All four studies reported only using a few components of the CCM - such as clinical information sharing, community linkages and supported self-management - to create an integrated health system. The implementation of these components in a health service seemed to improve the seamless transition between hospital and ambulatory settings, health outcomes and patient experiences. Further research is required to explore the effect of implementing all CCM components to support transition of care between hospital and ambulatory services.

  2. Fitting and Phenomenology in Type IA Supernova Cosmology: Generalized Likelihood Analyses for Multiple Evolving Populations and Observations of Near-Infrared Lightcurves Including Host Galaxy Properties

    Science.gov (United States)

    Ponder, Kara A.

    In the late 1990s, Type Ia supernovae (SNeIa) led to the discovery that the Universe is expanding at an accelerating rate due to dark energy. Since then, many different tracers of acceleration have been used to characterize dark energy, but the source of cosmic acceleration has remained a mystery. To better understand dark energy, future surveys such as the ground-based Large Synoptic Survey Telescope and the space-based Wide-Field Infrared Survey Telescope will collect thousands of SNeIa to use as a primary dark energy probe. These large surveys will be systematics limited, which makes it imperative for our insight regarding systematics to dramatically increase over the next decade for SNeIa to continue to contribute to precision cosmology. I approach this problem by improving statistical methods in the likelihood analysis and collecting near infrared (NIR) SNeIa with their host galaxies to improve the nearby data set and search for additional systematics. Using more statistically robust methods to account for systematics within the likelihood function can increase accuracy in cosmological parameters with a minimal precision loss. Though a sample of at least 10,000 SNeIa is necessary to confirm multiple populations of SNeIa, the bias in cosmology is ˜ 2 sigma with only 2,500 SNeIa. This work focused on an example systematic (host galaxy correlations), but it can be generalized for any systematic that can be represented by a distribution of multiple Gaussians. The SweetSpot survey gathered 114 low-redshift, NIR SNeIa that will act as a crucial anchor sample for the future high redshift surveys. NIR observations are not as affected by dust contamination, which may lead to increased understanding of systematics seen in optical wavelengths. We obtained spatially resolved spectra for 32 SweetSpot host galaxies to test for local host galaxy correlations. For the first time, we probe global host galaxy correlations with NIR brightnesses from the current literature

  3. EPR spectroscopy of MRI-related Gd(III) complexes: simultaneous analysis of multiple frequency and temperature spectra, including static and transient crystal field effects.

    Science.gov (United States)

    Rast, S; Borel, A; Helm, L; Belorizky, E; Fries, P H; Merbach, A E

    2001-03-21

    For the first time, a very general theoretical method is proposed to interpret the full electron paramagnetic resonance (EPR) spectra at multiple temperatures and frequencies in the important case of S-state metal ions complexed in liquid solution. This method is illustrated by a careful analysis of the measured spectra of two Gd3+ (S = 7/2) complexes. It is shown that the electronic relaxation mechanisms at the origin of the EPR line shape arise from the combined effects of the modulation of the static crystal field by the random Brownian rotation of the complex and of the transient zero-field splitting. A detailed study of the static crystal field mechanism shows that, contrarily to the usual global models involving only second-order terms, the fourth and sixth order terms can play a non-negligible role. The obtained parameters are well interpreted in the framework of the physics of the various underlying relaxation processes. A better understanding of these mechanisms is highly valuable since they partly control the efficiency of paramagnetic metal ions in contrast agents for medical magnetic resonance imaging (MRI).

  4. Mycobacterial UvrD1 is a Ku-dependent DNA helicase that plays a role in multiple DNA repair events, including double-strand break repair.

    Science.gov (United States)

    Sinha, Krishna Murari; Stephanou, Nicolas C; Gao, Feng; Glickman, Michael S; Shuman, Stewart

    2007-05-18

    Mycobacterium tuberculosis and other bacterial pathogens have a Ku-dependent nonhomologous end joining pathway of DNA double-strand break repair. Here we identify mycobacterial UvrD1 as a novel interaction partner for Ku in a genome-wide yeast two-hybrid screen. UvrD1 per se is a vigorous DNA-dependent ATPase but a feeble DNA helicase. Ku stimulates UvrD1 to catalyze ATP-dependent unwinding of 3'-tailed DNAs. UvrD1, Ku, and DNA form a stable ternary complex in the absence of ATP. The Ku binding determinants are located in the distinctive C-terminal segment of UvrD1. A second mycobacterial paralog, UvrD2, is a vigorous Ku-independent DNA helicase. Ablation of UvrD1 sensitizes Mycobacterium smegmatis to killing by ultraviolet and ionizing radiation and to a single chromosomal break generated by I-SceI endonuclease. The physical and functional interactions of bacterial Ku and UvrD1 highlight the potential for cross-talk between components of nonhomologous end joining and nucleotide excision repair pathways.

  5. Characterization of nicotine binding to the rat brain P2 preparation: the identification of multiple binding sites which include specific up-regulatory site(s)

    International Nuclear Information System (INIS)

    Sloan, J.W.

    1984-01-01

    These studies show that nicotine binds to the rat brain P 2 preparation by saturable and reversible processes. Multiple binding sites were revealed by the configuration of saturation, kinetic and Scatchard plots. A least squares best fit of Scatchard data using nonlinear curve fitting programs confirmed the presence of a very high affinity site, an up-regulatory site, a high affinity site and one or two low affinity sites. Stereospecificity was demonstrated for the up-regulatory site where (+)-nicotine was more effective and for the high affinity site where (-)-nicotine had a higher affinity. Drugs which selectively up-regulate nicotine binding site(s) have been identified. Further, separate very high and high affinity sites were identified for (-)- and (+)-[ 3 H]nicotine, based on evidence that the site density for the (-)-isomer is 10 times greater than that for the (+)-isomer at these sites. Enhanced nicotine binding has been shown to be a statistically significant phenomenon which appears to be a consequence of drugs binding to specific site(s) which up-regulate binding at other site(s). Although Scatchard and Hill plots indicate positive cooperatively, up-regulation more adequately describes the function of these site(s). A separate up-regulatory site is suggested by the following: (1) Drugs vary markedly in their ability to up-regulate binding. (2) Both the affinity and the degree of up-regulation can be altered by structural changes in ligands. (3) Drugs with specificity for up-regulation have been identified. (4) Some drugs enhance binding in a dose-related manner. (5) Competition studies employing cold (-)- and (+)-nicotine against (-)- and (+)-[ 3 H]nicotine show that the isomers bind to separate sites which up-regulate binding at the (-)- and (+)-nicotine high affinity sites and in this regard (+)-nicotine is more specific and efficacious than (-)-nicotine

  6. Transcriptional regulation of PP2A-A alpha is mediated by multiple factors including AP-2alpha, CREB, ETS-1, and SP-1.

    Directory of Open Access Journals (Sweden)

    He-Ge Chen

    2009-09-01

    Full Text Available Protein phosphatases-2A (PP-2A is a major serine/threonine phosphatase and accounts for more than 50% serine/threonine phosphatase activity in eukaryotes. The holoenzyme of PP-2A consists of the scaffold A subunit, the catalytic C subunit and the regulatory B subunit. The scaffold subunits, PP2A-A alpha/beta, provide a platform for both C and B subunits to bind, thus playing a crucial role in providing specific PP-2A activity. Mutation of the two genes encoding PP2A-A alpha/beta leads to carcinogenesis and likely other human diseases. Regulation of these genes by various factors, both extracellular and intracellular, remains largely unknown. In the present study, we have conducted functional dissection of the promoter of the mouse PP2A-A alpha gene. Our results demonstrate that the proximal promoter of the mouse PP2A-A alpha gene contains numerous cis-elements for the binding of CREB, ETS-1, AP-2 alpha, SP-1 besides the putative TFIIB binding site (BRE and the downstream promoter element (DPE. Gel mobility shifting assays revealed that CREB, ETS-1, AP-2 alpha, and SP-1 all bind to PP2A-A alpha gene promoter. In vitro mutagenesis and reporter gene activity assays reveal that while SP-1 displays negative regulation, CREB, ETS-1 and AP-2A alpha all positively regulate the promoter of the PP2A-A alpha gene. ChIP assays further confirm that all the above transcription factors participate the regulation of PP2A-A alpha gene promoter. Together, our results reveal that multiple transcription factors regulate the PP2A-A alpha gene.

  7. Distribution of maternal age and birth order groups in cases with unclassified multiple congenital abnormalities according to the number of component abnormalities: a national population-based case-control study.

    Science.gov (United States)

    Csermely, Gyula; Czeizel, Andrew E; Veszprémi, Béla

    2015-02-01

    Multiple congenital abnormalities are caused by chromosomal aberrations, mutant major genes and teratogens. A minor proportion of these patients are identified as syndromes but the major part belonging to the group of unclassified multiple CAs (UMCAs). The main objective of this study was to evaluate the maternal age and birth order in pregnant women who had offspring affected with UMCA. The strong association between numerical chromosomal aberrations, e.g., Down syndrome and advanced maternal age is well-known and tested here. The Hungarian Case-Control Surveillance of Congenital Abnormalities, 1980 to 1996, yielded a large population-based national data set with 22,843 malformed newborns or fetuses ("informative cases") included 1349 UMCA cases with their 2407 matched controls. Case-control comparison of maternal age and birth order was made for cases with UMCA, stratified by component numbers and their controls. In addition, 834 cases with Down syndrome were compared to 1432 matched controls. The well-known advanced maternal age with the higher risk for Down syndrome was confirmed. The findings of the study suggest that the young age of mothers associates with the higher risk of UMCA, in addition birth order 4 or more associates with the higher risk for UMCA with 2 and 3 component CAs. This study was the first to analyze the possible maternal and birth order effect for cases with UMCA, and the young age and higher birth order associated with a higher risk for UMCA. © 2014 Wiley Periodicals, Inc.

  8. Novel interstitial deletion of 10q24.3-25.1 associated with multiple congenital anomalies including lobar holoprosencephaly, cleft lip and palate, and hypoplastic kidneys.

    Science.gov (United States)

    Peltekova, Iskra T; Hurteau-Millar, Julie; Armour, Christine M

    2014-12-01

    Chromosome 10q deletions are rare and phenotypically diverse. Such deletions differ in length and occur in numerous regions on the long arm of chromosome 10, accounting for the wide clinical variability. Commonly reported findings include dysmorphic facial features, microcephaly, developmental delay, and genitourinary abnormalities. Here, we report on a female patient with a novel interstitial 5.54 Mb deletion at 10q24.31-q25.1. This patient had findings in common with a previously reported patient with an overlapping deletion, including renal anomalies and an orofacial cleft, but also demonstrated lobar holoprosencephaly and a Dandy-Walker malformation, features which have not been previously reported with 10q deletions. An analysis of the region deleted in our patient showed numerous genes, such as KAZALD1, PAX2, SEMA4G, ACTRA1, INA, and FGF8, whose putative functions may have played a role in the phenotype seen in our patient. © 2014 Wiley Periodicals, Inc.

  9. Relativistic calculation of nuclear magnetic shielding tensor using the regular approximation to the normalized elimination of the small component. III. Introduction of gauge-including atomic orbitals and a finite-size nuclear model.

    Science.gov (United States)

    Hamaya, S; Maeda, H; Funaki, M; Fukui, H

    2008-12-14

    The relativistic calculation of nuclear magnetic shielding tensors in hydrogen halides is performed using the second-order regular approximation to the normalized elimination of the small component (SORA-NESC) method with the inclusion of the perturbation terms from the metric operator. This computational scheme is denoted as SORA-Met. The SORA-Met calculation yields anisotropies, Delta sigma = sigma(parallel) - sigma(perpendicular), for the halogen nuclei in hydrogen halides that are too small. In the NESC theory, the small component of the spinor is combined to the large component via the operator sigma x piU/2c, in which pi = p + A, U is a nonunitary transformation operator, and c approximately = 137.036 a.u. is the velocity of light. The operator U depends on the vector potential A (i.e., the magnetic perturbations in the system) with the leading order c(-2) and the magnetic perturbation terms of U contribute to the Hamiltonian and metric operators of the system in the leading order c(-4). It is shown that the small Delta sigma for halogen nuclei found in our previous studies is related to the neglect of the U(0,1) perturbation operator of U, which is independent of the external magnetic field and of the first order with respect to the nuclear magnetic dipole moment. Introduction of gauge-including atomic orbitals and a finite-size nuclear model is also discussed.

  10. Multiple Geophysical Observations by a newly developed multi-component borehole instrument at the Continental Deep Drilling Site of the CCSD, Donghai, China

    Science.gov (United States)

    Xu, J.; Zhao, Z.; Ishii, H.; Yamauchi, T.

    2004-12-01

    Multiple Geophysical Observations by a newly developed multi-component borehole instrument at the Continental Deep Drilling Site of the CCSD, Donghai, China Jiren Xu1 (+86-10-68992879; xujiren@ccsd.org.cn) Zhixin Zhao1 (+86-10-68999734; zhaozhixin@ccsd.org.cn) Hiroshi Ishii2 (+81-0572-67-3105; ishii@tries.gr.jp Tsuneo Yamauchi3 (+81-052-789-3045; yamauchi@seis.nagoya-u.ac.jp) 1 Institute of Geology, Chinese Academy of Geological Sciences, China 2 Tono Research Institute of Earthquake Science (TRIES), Japan 3 Graduate School of Environmental Studies, Nagoya University, Japan The Chinese Continental Scientific Drilling (CCSD) site is located in the Donghai area of the Dabie-Sulu belt, which is the largest UHPM belt in the world. The drilling of the main borehole with 5000m will finish in next year. Three satellite boreholes, PP1, PP2 and PP3 were drilled and various surveys have been performed in the Donghai area about 6 years ago. We are going to install a newly developed Multi-component Instrument for borehole observations in main hole near the large Tanlu fault, and establish a long-term underground observation laboratory, which is the first noiseless one in China. The seismic activity and various geophysical fields, viz. strain, geomagnetism, geothermy, tilt, pore pressure etc. will be investigated. Data from the underground laboratory will be open to scientific, engineering and public services. We will measure the initial stress in various depths of the borehole by overcoring method using a new developed wireless intelligent type strainmeter of in-situ stress. Establishing a long-term noiseless underground observation laboratory at deep borehole and investigating crustal movement in East China are important for observing the physical conditions of the earth¡_s interior and solving many social problems, such as resources, disasters and environment. Multiple geophysical observations and the study in deep borehole will speed up and develop the study on tectonics

  11. Clinical application of RapidArc volumetric modulated arc therapy as a component in whole brain radiation therapy for poor prognostic, four or more multiple brain metastases

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Heon; Lee, Kyu Chan; Choi, Jin Ho; Kim, Hye Young; Lee, Seok Ho; Sung, Ki Hoon; Kim, Yun Mi [Gachon University Gil Hospital, Incheon (Korea, Republic of)

    2012-06-15

    To determine feasibility of RapidArc in sequential or simultaneous integrated tumor boost in whole brain radiation therapy (WBRT) for poor prognostic patients with four or more brain metastases. Nine patients with multiple ({>=}4) brain metastases were analyzed. Three patients were classified as class II in recursive partitioning analysis and 6 were class III. The class III patients presented with hemiparesis, cognitive deficit, or apraxia. The ratio of tumor to whole brain volume was 0.8-7.9%. Six patients received 2-dimensional bilateral WBRT, (30 Gy/10- 12 fractions), followed by sequential RapidArc tumor boost (15-30 Gy/4-10 fractions). Three patients received RapidArc WBRT with simultaneous integrated boost to tumors (48-50 Gy) in 10-20 fractions. The median biologically effective dose to metastatic tumors was 68.1 Gy10 and 67.2 Gy10 and the median brain volume irradiated more than 100 Gy3 were 1.9% (24 cm3) and 0.8% (13 cm3) for each group. With less than 3 minutes of treatment time, RapidArc was easily applied to the patients with poor performance status. The follow-up period was 0.3-16.5 months. Tumor responses among the 6 patients who underwent follow-up magnetic resonance imaging were partial and stable in 3 and 3, respectively. Overall survival at 6 and 12 months were 66.7% and 41.7%, respectively. The local progression-free survival at 6 and 12 months were 100% and 62.5%, respectively. RapidArc as a component in whole brain radiation therapy for poor prognostic, multiple brain metastases is an effective and safe modality with easy application.

  12. Application study of the components Activity and Participation of the ICF Checklist used in people with Multiple Sclerosis and its relation to the Core Sets

    Directory of Open Access Journals (Sweden)

    Rosé Colom Toldrá

    2016-10-01

    Full Text Available Introduction: The Core Set is a group of typical and significant functionality categories of the International Classification of Functioning, Disability and Health – ICF used for certain health conditions. Objective: The study reviewed the application of the component categories Activities and Participation based on the ICF Checklist for multiple sclerosis (MS and its relationship with the comprehensive and validated Core Sets by occupational therapists. Method: Descriptive quantitative research from collection and organization of data questionnaire based on the components Activities and Participation of the ICF Checklist - Version 2.1ª. Clinical form for the ICF containing 25 categories belonging to 6 domains and analysis of its relationship with the Core Sets. Participated 115 people with relapsing-remitting MS without disability to moderate disability, treated at the Central Institute of Hospital Clinics of the Faculty of Medicine University of São Paulo. We created database in Excel and made descriptive analysis of frequencies. Results: Most participants were women (85, mean age 32 years and 1 month (± 7.4. Study broadens the evidence of the applicability of the Comprehensive Core Set with 88% (22 and Core Set validated by occupational therapists with 72% (18 compared evaluated categories. More significant difficulties were encountered in the categories d640 Doing housework, d430 Lifting and carrying objects and d850 Remunerative employment, which reflected on the performance of various activities and social participation. Conclusion: Studies on application of the Core Set validated by occupational therapists are recommended to extend the evidence of professional clinical practice and inclusion of categories depending on the context.

  13. Applying Least Absolute Shrinkage Selection Operator and Akaike Information Criterion Analysis to Find the Best Multiple Linear Regression Models between Climate Indices and Components of Cow's Milk.

    Science.gov (United States)

    Marami Milani, Mohammad Reza; Hense, Andreas; Rahmani, Elham; Ploeger, Angelika

    2016-07-23

    This study focuses on multiple linear regression models relating six climate indices (temperature humidity THI, environmental stress ESI, equivalent temperature index ETI, heat load HLI, modified HLI (HLI new ), and respiratory rate predictor RRP) with three main components of cow's milk (yield, fat, and protein) for cows in Iran. The least absolute shrinkage selection operator (LASSO) and the Akaike information criterion (AIC) techniques are applied to select the best model for milk predictands with the smallest number of climate predictors. Uncertainty estimation is employed by applying bootstrapping through resampling. Cross validation is used to avoid over-fitting. Climatic parameters are calculated from the NASA-MERRA global atmospheric reanalysis. Milk data for the months from April to September, 2002 to 2010 are used. The best linear regression models are found in spring between milk yield as the predictand and THI, ESI, ETI, HLI, and RRP as predictors with p -value < 0.001 and R ² (0.50, 0.49) respectively. In summer, milk yield with independent variables of THI, ETI, and ESI show the highest relation ( p -value < 0.001) with R ² (0.69). For fat and protein the results are only marginal. This method is suggested for the impact studies of climate variability/change on agriculture and food science fields when short-time series or data with large uncertainty are available.

  14. Background, design and conceptual model of the cluster randomized multiple-component workplace study: FRamed Intervention to Decrease Occupational Muscle pain - "FRIDOM"

    Directory of Open Access Journals (Sweden)

    Jeanette Reffstrup Christensen

    2016-10-01

    Full Text Available Abstract Background Several RCT studies have aimed to reduce either musculoskeletal disorders, sickness presenteeism, sickness absenteeism or a combination of these among females with high physical work demands. These studies have provided evidence that workplace health promotion (WHP interventions are effective, but long-term effects are still uncertain. These studies either lack to succeed in maintaining intervention effects or lack to document if effects are maintained past a one-year period. This paper describes the background, design and conceptual model of the FRIDOM (FRamed Intervention to Decrease Occupational Muscle pain WHP program among health care workers. A job group characterized by having high physical work demands, musculoskeletal disorders, high sickness presenteeism - and absenteeism. Methods FRIDOM aimed to reduce neck and shoulder pain. Secondary aims were to decrease sickness presenteeism, sickness absenteeism and lifestyle-diseases such as other musculoskeletal disorders as well as metabolic-, and cardiovascular disorders – and to maintain participation to regular physical exercise training, after a one year intervention period. The entire concept was tailored to a population of female health care workers. This was done through a multi-component intervention including 1 intelligent physical exercise training (IPET, dietary advice and weight loss (DAW and cognitive behavioural training (CBT. Discussion The FRIDOM program has the potential to provide evidence-based knowledge of the pain reducing effect of a multi component WHP among a female group of employees with a high prevalence of musculoskeletal disorders and in a long term perspective evaluate the effects on sickness presenteeism and absenteeism as well as risk of life-style diseases. Trial registration NCT02843269 , 06.27.2016 - retrospectively registered.

  15. Background, design and conceptual model of the cluster randomized multiple-component workplace study: FRamed Intervention to Decrease Occupational Muscle pain - "FRIDOM".

    Science.gov (United States)

    Christensen, Jeanette Reffstrup; Bredahl, Thomas Viskum Gjelstrup; Hadrévi, Jenny; Sjøgaard, Gisela; Søgaard, Karen

    2016-10-24

    Several RCT studies have aimed to reduce either musculoskeletal disorders, sickness presenteeism, sickness absenteeism or a combination of these among females with high physical work demands. These studies have provided evidence that workplace health promotion (WHP) interventions are effective, but long-term effects are still uncertain. These studies either lack to succeed in maintaining intervention effects or lack to document if effects are maintained past a one-year period. This paper describes the background, design and conceptual model of the FRIDOM (FRamed Intervention to Decrease Occupational Muscle pain) WHP program among health care workers. A job group characterized by having high physical work demands, musculoskeletal disorders, high sickness presenteeism - and absenteeism. FRIDOM aimed to reduce neck and shoulder pain. Secondary aims were to decrease sickness presenteeism, sickness absenteeism and lifestyle-diseases such as other musculoskeletal disorders as well as metabolic-, and cardiovascular disorders - and to maintain participation to regular physical exercise training, after a one year intervention period. The entire concept was tailored to a population of female health care workers. This was done through a multi-component intervention including 1) intelligent physical exercise training (IPET), dietary advice and weight loss (DAW) and cognitive behavioural training (CBT). The FRIDOM program has the potential to provide evidence-based knowledge of the pain reducing effect of a multi component WHP among a female group of employees with a high prevalence of musculoskeletal disorders and in a long term perspective evaluate the effects on sickness presenteeism and absenteeism as well as risk of life-style diseases. NCT02843269 , 06.27.2016 - retrospectively registered.

  16. Summary from working group on multiple beams and funneling

    International Nuclear Information System (INIS)

    Wangler, T.P.

    1985-01-01

    The working group on Multiple Beams and Funneling discussed various topics related to multiple beams and funneling, including (1) design considerations for multiple-beam accelerators; (2) scaling of current, emittance, and brightness for multiple-beam systems; (3) funneling lines using either discrete components or a radiofrequency quadrupole (RFQ) funneling structure; and (4) alternatives to funneling

  17. Effects of non-exciton components excited by broadband pulses on quantum beats in a GaAs/AlAs multiple quantum well

    Science.gov (United States)

    Kojima, Osamu; Iwasaki, Yuki; Kita, Takashi; Akahane, Kouichi

    2017-01-01

    In this study, we report the effect of the excitation of non-exciton components caused by broadband pulses on quantum beat oscillation. Using a spectrally controlled pump pulse, a long-lived oscillation is clearly observed, and the pump-power dependence shows the suppression of the dephasing rate of the oscillation. Our results from incoherent carrier generation using a continuous wave laser demonstrate that the non-exciton components behaving as free carriers increase the oscillation dephasing rate.

  18. The nebular spectra of the transitional Type Ia Supernovae 2007on and 2011iv: broad, multiple components indicate aspherical explosion cores

    Science.gov (United States)

    Mazzali, P. A.; Ashall, C.; Pian, E.; Stritzinger, M. D.; Gall, C.; Phillips, M. M.; Höflich, P.; Hsiao, E.

    2018-02-01

    The nebular-epoch spectrum of the rapidly declining, "transitional" type Ia supernova (SN) 2007on showed double emission peaks, which have been interpreted as indicating that the SN was the result of the direct collision of two white dwarfs. The spectrum can be reproduced using two distinct emission components, one red-shifted and one blue-shifted. These components are similar in mass but have slightly different degrees of ionization. They recede from one another at a line-of-sight speed larger than the sum of the combined expansion velocities of their emitting cores, thereby acting as two independent nebulae. While this configuration appears to be consistent with the scenario of two white dwarfs colliding, it may also indicate an off-centre delayed detonation explosion of a near Chandrasekhar-mass white dwarf. In either case, broad emission line widths and a rapidly evolving light curve can be expected for the bolometric luminosity of the SN. This is the case for both SNe 2007on and 2011iv, also a transitional SN Ia which exploded in the same elliptical galaxy, NGC 1404. Although SN 2011iv does not show double-peaked emission line profiles, the width of its emission lines is such that a two-component model yields somewhat better results than a single-component model. Most of the mass ejected is in one component, however, which suggests that SN 2011iv was the result of the off-centre ignition of a Chandrasekhar-mass white dwarf.

  19. The nebular spectra of the transitional Type Ia Supernovae 2007on and 2011iv: broad, multiple components indicate aspherical explosion cores

    Science.gov (United States)

    Mazzali, P. A.; Ashall, C.; Pian, E.; Stritzinger, M. D.; Gall, C.; Phillips, M. M.; Höflich, P.; Hsiao, E.

    2018-05-01

    The nebular-epoch spectrum of the rapidly declining, `transitional' Type Ia supernova (SN) 2007on showed double emission peaks, which have been interpreted as indicating that the SN was the result of the direct collision of two white dwarfs. The spectrum can be reproduced using two distinct emission components, one redshifted and one blueshifted. These components are similar in mass but have slightly different degrees of ionization. They recede from one another at a line-of-sight speed larger than the sum of the combined expansion velocities of their emitting cores, thereby acting as two independent nebulae. While this configuration appears to be consistent with the scenario of two white dwarfs colliding, it may also indicate an off-centre delayed detonation explosion of a near-Chandrasekhar-mass white dwarf. In either case, broad emission line widths and a rapidly evolving light curve can be expected for the bolometric luminosity of the SN. This is the case for both SNe 2007on and 2011iv, also a transitional SN Ia that exploded in the same elliptical galaxy, NGC 1404. Although SN 2011iv does not show double-peaked emission line profiles, the width of its emission lines is such that a two-component model yields somewhat better results than a single-component model. Most of the mass ejected is in one component, however, which suggests that SN 2011iv was the result of the off-centre ignition of a Chandrasekhar-mass white dwarf.

  20. Structural features of the two-component system LisR/LisK suggests multiple responses for the adaptation and survival of Listeria monocytogenes

    Directory of Open Access Journals (Sweden)

    Nelson Enrique Arenas Suarez

    2013-08-01

    Full Text Available Here, we characterized the structure of the two-component regulatory system, LisR/LisK, in Listeria monocytogenes. To predict the structure of both proteins and the relationship between them, we employed several bioinformatic tools and databases. Based on our results, LisK protein is embedded in the cell membrane and its modular composition (HAMP, histidine kinase and ATPase domains is associated with its autophosphorylation (His-266. A stimulus-response likely determines the sequential signal propagation from the bacterial cell surface to its cytoplasmic components. According to our results, LisR is a cytoplasmic protein with a receptor domain (homologous to CheY that comprises a phosphoacceptor residue (Asp-52 and a DNA-binding domain, which may allow the transmission of a specific transcriptional response. LisR/LisK has been experimentally characterized both biochemically andfunctionally in other Bacilli pathophysiology; our structure-function approach may facilitate the design of suitable inhibitors.

  1. Non-destructive evaluation of chlorophyll content in quinoa and amaranth leaves by simple and multiple regression analysis of RGB image components

    DEFF Research Database (Denmark)

    Riccardi, M.; Mele, G.; Pulvento, C.

    2014-01-01

    Leaf chlorophyll content provides valuable information about physiological status of plants; it is directly linked to photosynthetic potential and primary production. In vitro assessment by wet chemical extraction is the standard method for leaf chlorophyll determination. This measurement is expe...... of foliar chlorophyll content and had a lower amount of noise in the whole range of chlorophyll studied compared with SPAD and other leaf image processing based models when applied to quinoa and amaranth....... components analysis of digital images acquired with a standard SLR camera. Digital images of leaves from different genotypes of quinoa and amaranth were acquired directly in the field. Mean values of each RGB component were evaluated via image analysis software and correlated to leaf chlorophyll provided...

  2. Hyperfrequency components

    Science.gov (United States)

    1994-09-01

    The document has a collection of 19 papers (11 on technologies, 8 on applications) by 26 authors and coauthors. Technological topics include: evolution from conventional HEMT's double heterojunction and planar types of pseudomorphic HEMT's; MMIC R&D and production aspects for very-low-noise, low-power, and very-low-noise, high-power applications; hyperfrequency CAD tools; parametric measurements of hyperfrequency components on plug-in cards for design and in-process testing uses; design of Class B power amplifiers and millimetric-wave, bigrid-transistor mixers, exemplifying combined use of three major types of physical simulation in electrical modeling of microwave components; FET's for power amplification at up to 110 GHz; production, characterization, and nonlinear applications of resonant tunnel diodes. Applications topics include: development of active modules for major European programs; tubes versus solid-state components in hyperfrequency applications; status and potentialities of national and international cooperative R&D on MMIC's and CAD of hyperfrequency circuitry; attainable performance levels in multifunction MMIC applications; state of the art relative of MESFET power amplifiers (Bands S, C, X, Ku); creating a hyperfrequency functions library, of parametrizable reference cells or macrocells; and design of a single-stage, low-noise, band-W amplifier toward development of a three-stage amplifier.

  3. MULTIPLE OBJECTS

    Directory of Open Access Journals (Sweden)

    A. A. Bosov

    2015-04-01

    Full Text Available Purpose. The development of complicated techniques of production and management processes, information systems, computer science, applied objects of systems theory and others requires improvement of mathematical methods, new approaches for researches of application systems. And the variety and diversity of subject systems makes necessary the development of a model that generalizes the classical sets and their development – sets of sets. Multiple objects unlike sets are constructed by multiple structures and represented by the structure and content. The aim of the work is the analysis of multiple structures, generating multiple objects, the further development of operations on these objects in application systems. Methodology. To achieve the objectives of the researches, the structure of multiple objects represents as constructive trio, consisting of media, signatures and axiomatic. Multiple object is determined by the structure and content, as well as represented by hybrid superposition, composed of sets, multi-sets, ordered sets (lists and heterogeneous sets (sequences, corteges. Findings. In this paper we study the properties and characteristics of the components of hybrid multiple objects of complex systems, proposed assessments of their complexity, shown the rules of internal and external operations on objects of implementation. We introduce the relation of arbitrary order over multiple objects, we define the description of functions and display on objects of multiple structures. Originality.In this paper we consider the development of multiple structures, generating multiple objects.Practical value. The transition from the abstract to the subject of multiple structures requires the transformation of the system and multiple objects. Transformation involves three successive stages: specification (binding to the domain, interpretation (multiple sites and particularization (goals. The proposed describe systems approach based on hybrid sets

  4. Multiple sclerosis among service members of the active and reserve components of the U.S. Armed Forces and among other beneficiaries of the Military Health System, 2007-2016.

    Science.gov (United States)

    Williams, Valerie F; Stahlman, Shauna; Ying, Saixia

    2017-08-01

    During 2007-2016, a total of 2,031 active component service members received incident diagnoses of multiple sclerosis (MS), for an overall unadjusted incidence rate of 14.9 cases per 100,000 p-yrs. The average overall unadjusted rate among reserve/guard members during this surveillance period was 6.9 cases per 100,000 persons. In both components, women had a higher overall incidence of MS than men across all race/ethnicity groups. Overall rates of MS were highest among non-Hispanic black service members. Crude annual incidence rates among active component members decreased slightly during 2007-2016, while rates among reserve/guard members were relatively stable. Among active component members, the annual female-to-male incidence ratios decreased during the 10-year period (3.7:1 in 2007 to 2.5:1 in 2016). Annual numbers of incident cases of MS decreased among non-service member Military Health System beneficiaries during this period. The median age at MS case-defining diagnosis was 32 years among active component members, 37 years among reserve/guard members, and 48 years among non-service member beneficiaries. The median time intervals between initial presentation and case-defining MS-related encounter ranged from 15 days among reserve/guard component members to 20 days among active component service members. This study makes a useful contribution to the literature on temporal changes in the incidence of MS by sex and race/ethnicity.

  5. A de novo 1.58 Mb deletion, including MAP2K6 and mapping 1.28 Mb upstream to SOX9, identified in a patient with Pierre Robin sequence and osteopenia with multiple fractures.

    Science.gov (United States)

    Smyk, Marta; Roeder, Elizabeth; Cheung, Sau Wai; Szafranski, Przemyslaw; Stankiewicz, Paweł

    2015-08-01

    Defects of long-range regulatory elements of dosage-sensitive genes represent an under-recognized mechanism underlying genetic diseases. Haploinsufficiency of SOX9, the gene essential for development of testes and differentiation of chondrocytes, results in campomelic dysplasia, a skeletal malformation syndrome often associated with sex reversal. Chromosomal rearrangements with breakpoints mapping up to 1.6 Mb up- and downstream to SOX9, and disrupting its distant cis-regulatory elements, have been described in patients with milder forms of campomelic dysplasia, Pierre Robin sequence, and sex reversal. We present an ∼1.58 Mb deletion mapping ∼1.28 Mb upstream to SOX9 that encompasses its putative long-range cis-regulatory element(s) and MAP2K6 in a patient with Pierre Robin sequence and osteopenia with multiple fractures. Low bone mass panel testing using massively parallel sequencing of 23 nuclear genes, including COL1A1 and COL1A2 was negative. Based on the previous mouse model of Map2k6, suggesting that Sox9 is likely a downstream target of the p38 MAPK pathway, and our previous chromosome conformation capture-on-chip (4C) data showing potential interactions between SOX9 promoter and MAP2K6, we hypothesize that deletion of MAP2K6 might have affected SOX9 expression and contributed to our patient's phenotype. © 2015 Wiley Periodicals, Inc.

  6. Development and clinical evaluation of multiple investigational monovalent DENV vaccines to identify components for inclusion in a live attenuated tetravalent DENV vaccine

    Science.gov (United States)

    Durbin, Anna P.; Kirkpatrick, Beth D.; Pierce, Kristen K.; Schmidt, Alexander C.; Whitehead, Stephen S.

    2011-01-01

    The Laboratory of Infectious Diseases at the National Institute of Allergy and Infectious Diseases, National Institutes of Health has been engaged in an effort to develop a safe, efficacious, and affordable live attenuated tetravalent dengue vaccine (LATV) for more than ten years. Numerous recombinant monovalent DENV vaccine candidates have been evaluated in the SCID-HuH-7 mouse and in rhesus macaques to identify those candidates with a suitable attenuation phenotype. In addition, the ability of these candidates to infect and disseminate in Aedes mosquitoes had also been determined. Those candidates that were suitably attenuated in SCID-HuH-7 mice, rhesus macaques, and mosquitoes were selected for further evaluation in humans. This review will describe the generation of multiple candidate vaccines directed against each DENV serotype, the preclinical and clinical evaluation of these candidates, and the process of selecting suitable candidates for inclusion in a LATV dengue vaccine. PMID:21781997

  7. Problemas multiplicativos envolvendo combinatória: estratégias de resolução empregadas por alunos do Ensino Fundamental público Multiplicative problems including combinatorics: solving strategies adopted by Public Elementary School students

    Directory of Open Access Journals (Sweden)

    Leny R. M. Teixeira

    2011-01-01

    was better in problems with two variables and factors with low values. There was no alteration in the performance among the 6th and 9th graders. In general, the difficulties found were related to: 1 intuitive models students have when dealing with multiplication (especially the one including repeated addition; 2 the semantic structure of the problem; 3 numerical preferences regarding the quantity of numerical digits, ways of representing the problem and interpretation of verbal problem statements. Because multiplication is a very complex operation involving abstract cognitive processes in its solution, we believe that the teacher needs to know them to facilitate students' learning.

  8. Detection of Quiescent Infections with Multiple Elephant Endotheliotropic Herpesviruses (EEHVs), Including EEHV2, EEHV3, EEHV6, and EEHV7, within Lymphoid Lung Nodules or Lung and Spleen Tissue Samples from Five Asymptomatic Adult African Elephants.

    Science.gov (United States)

    Zong, Jian-Chao; Heaggans, Sarah Y; Long, Simon Y; Latimer, Erin M; Nofs, Sally A; Bronson, Ellen; Casares, Miguel; Fouraker, Michael D; Pearson, Virginia R; Richman, Laura K; Hayward, Gary S

    2015-12-30

    More than 80 cases of lethal hemorrhagic disease associated with elephant endotheliotropic herpesviruses (EEHVs) have been identified in young Asian elephants worldwide. Diagnostic PCR tests detected six types of EEHV in blood of elephants with acute disease, although EEHV1A is the predominant pathogenic type. Previously, the presence of herpesvirus virions within benign lung and skin nodules from healthy African elephants led to suggestions that African elephants may be the source of EEHV disease in Asian elephants. Here, we used direct PCR-based DNA sequencing to detect EEHV genomes in necropsy tissue from five healthy adult African elephants. Two large lung nodules collected from culled wild South African elephants contained high levels of either EEHV3 alone or both EEHV2 and EEHV3. Similarly, a euthanized U.S. elephant proved to harbor multiple EEHV types distributed nonuniformly across four small lung nodules, including high levels of EEHV6, lower levels of EEHV3 and EEHV2, and a new GC-rich branch type, EEHV7. Several of the same EEHV types were also detected in random lung and spleen samples from two other elephants. Sanger PCR DNA sequence data comprising 100 kb were obtained from a total of 15 different strains identified, with (except for a few hypervariable genes) the EEHV2, EEHV3, and EEHV6 strains all being closely related to known genotypes from cases of acute disease, whereas the seven loci (4.0 kb) obtained from EEHV7 averaged 18% divergence from their nearest relative, EEHV3. Overall, we conclude that these four EEHV species, but probably not EEHV1, occur commonly as quiescent infections in African elephants. Acute hemorrhagic disease characterized by high-level viremia due to infection by members of the Proboscivirus genus threatens the future breeding success of endangered Asian elephants worldwide. Although the genomes of six EEHV types from acute cases have been partially or fully characterized, lethal disease predominantly involves a variety

  9. Simultaneous determination of components released from dental composite resins in human saliva by liquid chromatography/multiple-stage ion trap mass spectrometry.

    Science.gov (United States)

    Hsu, Wei-Yi; Wang, Ven-Shing; Lai, Chien-Chen; Tsai, Fuu-Jen

    2012-02-01

    Dental composite resins are widely used for fixing teeth; however, the monomers used in dental composite resins have been found to be cytotoxic and genotoxic, namely triethylene glycol dimethacrylate (TEGDMA), urethane dimethacrylate (UDMA), and bisphenol A glycol dimethacrylate (Bis-GMA). In this study, we incubated dental composite resins with human saliva for demonstrating the released monomers and biodegradation products. A simple saliva sample dilution method without purification or derivatization was used for quantification. We found that liquid chromatography coupled with multiple-stage ion trap mass spectrometry (LC-MS(n) ) operated in selected reaction monitoring (SRM) mode was able to separate the three monomers within 10 min. The calibration curves were linear (R² >0.996) over a wide range for each monomer in saliva: TEGDMA, 5-500 ppb; UDMA, 5-100 ppb, and Bis-GMA, 5-700 ppb. Furthermore, several biodegradation products were discovered with data-dependent MS/MS scan techniques. Although TEGMA degradation products have previously been reported, we identified two previously unknown UDMA degradation products. The LC-MS/MS method developed in this study was able to successfully quantify monomers and their principal biodegradation products from dental composite resins in human saliva. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Comparison of serum free light chain and urine electrophoresis for the detection of the light chain component of monoclonal immunoglobulins in light chain and intact immunoglobulin multiple myeloma.

    Science.gov (United States)

    Dejoie, Thomas; Attal, Michel; Moreau, Philippe; Harousseau, Jean-Luc; Avet-Loiseau, Herve

    2016-03-01

    Response criteria for multiple myeloma are based upon changes in monoclonal protein levels quantified using serum and/or urine protein electrophoresis. The latter lacks sensitivity at low monoclonal protein levels and since 2001, the serum free light chain test has been available and its clinical utility proven, yet guidelines have not recommended it as a replacement for urine assessment. Herein we evaluated responses using serum free light chain measurements and serum and urine electrophoresis after 2 and 4 cycles of therapy and after stem cell transplantation in 25 light chain and 157 intact immunoglobulin myeloma patients enrolled in the IFM 2007-02 MM trial. All 25 light chain patients had measurable disease by serum free light chain and urine methods at presentation. By contrast 98 out of 157 intact immunoglobulin patients had measurable disease by serum free light chain compared to 55 out of 157 by urine electrophoresis. In all patients there was substantial agreement between predicate (serum/urine protein electrophoresis) and test (serum protein electrophoresis and serum free light chain) methods for response assessment (Weighted Kappa=0.83). Urine immunofixation became negative in 47% light chain and 43% intact immunoglobulin patients after 2 cycles of therapy. At this time the serum free light chain ratio normalised in only 11% and 27% patients, respectively. In summary we found good agreement between methods for response assessment, but the serum free light chain test provided greater sensitivity than urine electrophoresis for monitoring. To our knowledge this is the first report comparing both methods for response assignment based on the International Myeloma Working Group guidelines. (Clinical Trials Register.eu identifier: 2007-005204-40). Copyright© Ferrata Storti Foundation.

  11. Hot gas path component

    Science.gov (United States)

    Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Porter, Christopher Donald; Schick, David Edward

    2017-09-12

    Various embodiments of the disclosure include a turbomachine component. and methods of forming such a component. Some embodiments include a turbomachine component including: a first portion including at least one of a stainless steel or an alloy steel; and a second portion joined with the first portion, the second portion including a nickel alloy including an arced cooling feature extending therethrough, the second portion having a thermal expansion coefficient substantially similar to a thermal expansion coefficient of the first portion, wherein the arced cooling feature is located within the second portion to direct a portion of a coolant to a leakage area of the turbomachine component.

  12. Colorectal laterally spreading tumors show characteristic expression of cell polarity factors, including atypical protein kinase C λ/ι, E-cadherin, β-catenin and basement membrane component.

    Science.gov (United States)

    Ichikawa, Yasushi; Nagashima, Yoji; Morioka, Kaori; Akimoto, Kazunori; Kojima, Yasuyuki; Ishikawa, Takashi; Goto, Ayumu; Kobayashi, Noritoshi; Watanabe, Kazuteru; Ota, Mitsuyoshi; Fujii, Shoichi; Kawamata, Mayumi; Takagawa, Ryo; Kunizaki, Chikara; Takahashi, Hirokazu; Nakajima, Atsushi; Maeda, Shin; Shimada, Hiroshi; Inayama, Yoshiaki; Ohno, Shigeo; Endo, Itaru

    2014-09-01

    Colorectal flat-type tumors include laterally spreading tumors (LSTs) and flat depressed-type tumors. The former of which shows a predominant lateral spreading growth rather than an invasive growth. The present study examined the morphological characteristics of LSTs, in comparison with polypoid- or flat depressed-type tumors, along with the expression of atypical protein kinase C (aPKC) λ/ι, a pivotal cell polarity regulator, and the hallmarks of cell polarity, as well as with type IV collagen, β-catenin and E-cadherin. In total, 37 flat-type (24 LSTs and 13 flat depressed-type tumors) and 20 polypoid-type colorectal tumors were examined. The LSTs were classified as 15 LST adenoma (LST-A) and nine LST cancer in adenoma (LST-CA). An immunohistochemical examination was performed on aPKC λ/ι, type IV collagen, β-catenin and E-cadherin. The LST-A and -CA showed a superficial replacing growth pattern, with expression of β-catenin and E-cadherin in the basolateral membrane and type IV collagen along the basement membrane. In addition, 86.6% of LST-A and 55.6% of LST-CA showed aPKC λ/ι expression of 1+ (weak to normal intensity staining in the cytoplasm compared with the normal epithelium). Furthermore, ~45% of the polypoid-type adenomas showed 2+ (moderate intensity staining in the cytoplasm and/or nucleus) and 66.7% of the polypoid-type cancer in adenoma were 3+ (strong intensity staining in the cytoplasm and nucleus). A statistically significant positive correlation was observed between the expression of aPKC λ/ι and β-catenin (r=0.842; P<0.001), or type IV collagen (r=0.823; P<0.001). The LSTs showed a unique growth pattern, different from the expanding growth pattern presented by a polypoid tumor and invasive cancer. The growth characteristics of LST appear to be caused by adequate coexpression of β-catenin, type IV collagen and aPKC λ/ι.

  13. Different accumulation profiles of multiple components between pericarp and seed of Alpinia oxyphylla capsular fruit as determined by UFLC-MS/MS.

    Science.gov (United States)

    Chen, Feng; Li, Hai-Long; Tan, Yin-Feng; Guan, Wei-Wei; Zhang, Jun-Qing; Li, Yong-Hui; Zhao, Yuan-Sheng; Qin, Zhen-Miao

    2014-04-10

    Plant secondary metabolites are known to not only play a key role in the adaptation of plants to their environment, but also represent an important source of active pharmaceuticals. Alpinia oxyphylla capsular fruits, made up of seeds and pericarps, are commonly used in traditional East Asian medicines. In clinical utilization of these capsular fruits, inconsistent processing approaches (i.e., hulling pericarps or not) are employed, with the potential of leading to differential pharmacological effects. Therefore, an important question arises whether the content levels of pharmacologically active chemicals between the seeds and pericarps of A. oxyphylla are comparable. Nine secondary metabolites present in A. oxyphylla capsular fruits, including flavonoids (e.g., tectochrysin, izalpinin, chrysin, apigenin-4',7-dimethylether and kaempferide), diarylheptanoids (e.g., yakuchinone A and B and oxyphyllacinol) and sesquiterpenes (e.g., nootkatone), were regarded as representative constituents with putative pharmacological activities. This work aimed to investigate the abundance of the nine constituents in the seeds and pericarps of A. oxyphylla. Thirteen batches of A. oxyphylla capsular fruits were gathered from different production regions. Accordingly, an ultra-fast high performance liquid chromatography/quadrupole tandem mass spectrometry (UFLC-MS/MS) method was developed and validated. We found that: (1) the nine secondary metabolites were differentially concentrated in seeds and fruit capsules; (2) nootkatone is predominantly distributed in the seeds; in contrast, the flavonoids and diarylheptanoids are mainly deposited in the capsules; and (3) the content levels of the nine secondary metabolites occurring in the capsules varied greatly among different production regions, although the nootkatone levels in the seeds were comparable among production regions. These results are helpful to evaluating and elucidating pharmacological activities of A. oxyphylla capsular

  14. Different Accumulation Profiles of Multiple Components Between Pericarp and Seed of Alpinia oxyphylla Capsular Fruit as Determined by UFLC-MS/MS

    Directory of Open Access Journals (Sweden)

    Feng Chen

    2014-04-01

    Full Text Available Plant secondary metabolites are known to not only play a key role in the adaptation of plants to their environment, but also represent an important source of active pharmaceuticals. Alpinia oxyphylla capsular fruits, made up of seeds and pericarps, are commonly used in traditional East Asian medicines. In clinical utilization of these capsular fruits, inconsistent processing approaches (i.e., hulling pericarps or not are employed, with the potential of leading to differential pharmacological effects. Therefore, an important question arises whether the content levels of pharmacologically active chemicals between the seeds and pericarps of A. oxyphylla are comparable. Nine secondary metabolites present in A. oxyphylla capsular fruits, including flavonoids (e.g., tectochrysin, izalpinin, chrysin, apigenin-4',7-dimethylether and kaempferide, diarylheptanoids (e.g., yakuchinone A and B and oxyphyllacinol and sesquiterpenes (e.g., nootkatone, were regarded as representative constituents with putative pharmacological activities. This work aimed to investigate the abundance of the nine constituents in the seeds and pericarps of A. oxyphylla. Thirteen batches of A. oxyphylla capsular fruits were gathered from different production regions. Accordingly, an ultra-fast high performance liquid chromatography/quadrupole tandem mass spectrometry (UFLC-MS/MS method was developed and validated. We found that: (1 the nine secondary metabolites were differentially concentrated in seeds and fruit capsules; (2 nootkatone is predominantly distributed in the seeds; in contrast, the flavonoids and diarylheptanoids are mainly deposited in the capsules; and (3 the content levels of the nine secondary metabolites occurring in the capsules varied greatly among different production regions, although the nootkatone levels in the seeds were comparable among production regions. These results are helpful to evaluating and elucidating pharmacological activities of A. oxyphylla

  15. [Multiple apheresis].

    Science.gov (United States)

    Coffe, C

    2007-05-01

    Multiple apheresis makes it possible to obtain at least two labile blood components from a single donor using a cell separator. It can be either multicomponent apheresis leading to the preparation of at least two different blood component types or red blood cell apheresis providing two identical red blood cell concentrates. These techniques available in addition to whole blood donation, are modifying collection strategies in many Etablissements Français du Sang and will contribute to improve stock logistics in the future. In areas with insufficient stock, these procedures will help achieve blood component self-sufficiency. The author first describes the principle underlying different--current or future--techniques as well as their advantages and drawbacks. He finally addresses the potential impact of these processes on the evolution of blood collection and the advantages to be gained.

  16. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  17. Component testing

    International Nuclear Information System (INIS)

    Hutchings, M.T.; Schofield, Peter; Seymour, W.A.J.

    1986-01-01

    A method for non-destructive testing of an industrial component to ascertain if it is a single crystal, and to find the crystal orientations of those parts of the component which are single crystals, involves irradiating the component with a monochromatic collimated neutron beam. Diffracted neutron beams are observed live by means of LiF/ZnS composite screen, an image intensifier and a television camera and screen. (author)

  18. Qualitative and quantitative analysis of multiple components for quality control of Deng-Zhan-Sheng-Mai capsules by ultra high performance liquid chromatography tandem mass spectrometry method coupled with chemometrics.

    Science.gov (United States)

    Jiang, Pin; Lu, Yan; Chen, Daofeng

    2017-02-01

    Deng-Zhan-Sheng-Mai capsules are a well-known traditional Chinese patent medicine that was developed in China for the treatment of ischemic stroke. Its quality control focuses on Erigerontis Herba but ignores the contributions of Ginseng Radix et Rhizoma, Schisandrae Chinensis Fructus, and Ophiopogonis Radix. To improve the quality standards for this medicine, this work reports the application of a systematic ultra high performance liquid chromatography tandem mass spectrometric method coupled with chemometrics. Three qualitative and quantitative parameters are established for the evaluation of quality: chemical profiling, the relationship between the contents of 18 compounds and the antioxidant activity, and chemometric analysis. A total of 55 compounds, including 20 phenolic acids, 10 flavonoids, 15 saponins, and 10 lignans, were identified. The method for the quantitative determination of the aforementioned 18 compounds was validated. The limit of quantification ranged from 0.13 to 9.60 ng/mL. The overall recoveries ranged from 95.31 to 103.54%. Hierarchical cluster analysis and principal component analysis were applied to the data of 18 components in ten batches of samples. Nine compounds, including scutellarin, 3,5-O-dicaffeoylquinic acid, 4,5-O-dicaffeoylquinic acid, ginsenoside Rb1, ginsenoside Re, ginsenoside Rg1, ophiopogonin D, schisandrin, and schisandrol B, are suggested as chemical markers for evaluating the quality. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Multiple Sclerosis.

    Science.gov (United States)

    Plummer, Nancy; Michael, Nancy, Ed.

    This module on multiple sclerosis is intended for use in inservice or continuing education programs for persons who administer medications in long-term care facilities. Instructor information, including teaching suggestions, and a listing of recommended audiovisual materials and their sources appear first. The module goal and objectives are then…

  20. Multiple Pregnancy

    Science.gov (United States)

    ... Education & Events Advocacy For Patients About ACOG Multiple Pregnancy Home For Patients Search FAQs Multiple Pregnancy Page ... Multiple Pregnancy FAQ188, July 2015 PDF Format Multiple Pregnancy Pregnancy How does multiple pregnancy occur? What are ...

  1. Outbreak epidemiologically linked with a composite product of beef, mechanically separated chicken and textured vegetable protein contaminated with multiple serotypes of Salmonella enterica including multidrug-resistant Infantis, California 2016.

    Science.gov (United States)

    Hutchinson, J A; Wheeler, C; Mohle-Boetani, J C

    2018-03-01

    A salmonellosis outbreak occurred at a California prison in April and May 2016. In a cohort study of 371 inmates, persons who consumed dishes from the prison kitchen made from ground meat had a higher attack rate (15%) than those who did not (4%) (risk ratio 3.4, 95% CI 1.1-10.6). The ground meat product was composed exclusively of beef, mechanically separated chicken (MSC) and textured vegetable protein; eight of eight lots of the product collected from the prison and processing facility were contaminated with Salmonella enterica of eight serotypes and 17 distinct PFGE patterns, including multidrug-resistant S. Infantis. Either the MSC or the beef could have been the source of the particular strains of S. enterica isolated from patients or the product. The microbiological evidence is most consistent with MSC as the source of the high levels of S. enterica in the epidemiologically linked meat product. Our findings contribute to the growing body of evidence about the hazard posed by the use of products containing raw mechanically separated poultry in kitchens in institutions.

  2. Multiple sclerosis; Multiple Sklerose

    Energy Technology Data Exchange (ETDEWEB)

    Grunwald, I.Q.; Kuehn, A.L.; Backens, M.; Papanagiotou, P. [Universitaet des Saarlandes, Abteilung fuer Diagnostische und Interventionelle Neuroradiologie, Radiologische Klinik, Homburg/Saar (Germany); Shariat, K. [Universitaet des Saarlandes, Klinik fuer Neurochirurgie, Homburg/Saar (Germany); Kostopoulos, P. [Universitaet des Saarlandes, Klinik fuer Neurologie, Homburg/Saar (Germany)

    2008-06-15

    Multiple sclerosis is the most common chronic inflammatory disease of myelin with interspersed lesions in the white matter of the central nervous system. Magnetic resonance imaging (MRI) plays a key role in the diagnosis and monitoring of white matter diseases. This article focuses on key findings in multiple sclerosis as detected by MRI. (orig.) [German] Die Multiple Sklerose (MS) ist die haeufigste chronisch-entzuendliche Erkrankung des Myelins mit eingesprengten Laesionen im Bereich der weissen Substanz des zentralen Nervensystems. Die Magnetresonanztomographie (MRT) hat bei der Diagnosestellung und Verlaufskontrolle eine Schluesselrolle. Dieser Artikel befasst sich mit Hauptcharakteristika der MR-Bildbebung. (orig.)

  3. Component Rhinoplasty

    OpenAIRE

    Mohmand, Muhammad Humayun; Ahmad, Muhammad

    2014-01-01

    BACKGROUND According to statistics of American Society of Plastic Surgeons, cosmetic rhinoplasty was the second most frequently performed cosmetic surgery. This study shares the experiences with component rhinoplasty. METHODS From 2004 to 2010, all patients underwent aesthetic nasal surgery were enrolled. The patients requiring only correction of septal deviation and those presenting with cleft lip nasal deformity were excluded. All procedures were performed under general anaesthesia with ope...

  4. Multiple factor analysis by example using R

    CERN Document Server

    Pagès, Jérôme

    2014-01-01

    Multiple factor analysis (MFA) enables users to analyze tables of individuals and variables in which the variables are structured into quantitative, qualitative, or mixed groups. Written by the co-developer of this methodology, Multiple Factor Analysis by Example Using R brings together the theoretical and methodological aspects of MFA. It also includes examples of applications and details of how to implement MFA using an R package (FactoMineR).The first two chapters cover the basic factorial analysis methods of principal component analysis (PCA) and multiple correspondence analysis (MCA). The

  5. Refined Probability of Differential Characteristics Including Dependency Between Multiple Rounds

    NARCIS (Netherlands)

    A. Canteaut (Anne); E. Lambooij (Eran); S. Neves (Samuel); S. Rasoolzadeh (Shahram); Y. Sasaki (Yu); M.M.J. Stevens (Marc)

    2017-01-01

    textabstractThe current paper studies the probability of differential characteristics for an unkeyed (or with a fixed key) construction. Most notably, it focuses on the gap between two probabilities of differential characteristics: probability with independent S-box assumption, p_ind, and exact

  6. Treatment Option Overview (Plasma Cell Neoplasms Including Multiple Myeloma)

    Science.gov (United States)

    ... blood cells) are removed from the blood or bone marrow of the patient ( autologous transplant) or a donor ( allogeneic transplant) and are ... the patient's stem cells from the blood or bone marrow are used; or two autologous stem cell transplants followed by an autologous or ...

  7. Treatment Options for Plasma Cell Neoplasms (Including Multiple Myeloma)

    Science.gov (United States)

    ... blood cells) are removed from the blood or bone marrow of the patient ( autologous transplant) or a donor ( allogeneic transplant) and are ... the patient's stem cells from the blood or bone marrow are used; or two autologous stem cell transplants followed by an autologous or ...

  8. Variance Components

    CERN Document Server

    Searle, Shayle R; McCulloch, Charles E

    1992-01-01

    WILEY-INTERSCIENCE PAPERBACK SERIES. The Wiley-Interscience Paperback Series consists of selected books that have been made more accessible to consumers in an effort to increase global appeal and general circulation. With these new unabridged softcover volumes, Wiley hopes to extend the lives of these works by making them available to future generations of statisticians, mathematicians, and scientists. ". . .Variance Components is an excellent book. It is organized and well written, and provides many references to a variety of topics. I recommend it to anyone with interest in linear models.".

  9. Pump apparatus including deconsolidator

    Energy Technology Data Exchange (ETDEWEB)

    Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

    2014-10-07

    A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

  10. Optical modulator including grapene

    Science.gov (United States)

    Liu, Ming; Yin, Xiaobo; Zhang, Xiang

    2016-06-07

    The present invention provides for a one or more layer graphene optical modulator. In a first exemplary embodiment the optical modulator includes an optical waveguide, a nanoscale oxide spacer adjacent to a working region of the waveguide, and a monolayer graphene sheet adjacent to the spacer. In a second exemplary embodiment, the optical modulator includes at least one pair of active media, where the pair includes an oxide spacer, a first monolayer graphene sheet adjacent to a first side of the spacer, and a second monolayer graphene sheet adjacent to a second side of the spacer, and at least one optical waveguide adjacent to the pair.

  11. Multiple System Atrophy (MSA)

    Science.gov (United States)

    Multiple system atrophy (MSA) Overview Multiple system atrophy (MSA) is a rare, degenerative neurological disorder affecting your body's involuntary (autonomic) functions, including blood pressure, breathing, bladder function and muscle ...

  12. Blends of pheromones, with and without host plant volatiles, can attract multiple species of Cerambycid beetles simultaneously

    Science.gov (United States)

    L.M. Hanks; J.A. Mongold-Diers; T.H. Atkinson; M.K. Fierke; M.D. Ginzel; E.E. Graham; T.M. Poland; A.B. Richards; M.L. Richardson; J.G.. Millar

    2018-01-01

    Pheromone components of cerambycid beetles are often conserved, with a given compound serving as a pheromone component for multiple related species, including species native to different continents. Consequently, a single synthesized compound may attract multiple species to a trap simultaneously. Furthermore, our previous research in east-central Illinois had...

  13. Generalized internal multiple imaging

    KAUST Repository

    Zuberi, Mohammad Akbar Hosain

    2014-12-04

    Various examples are provided for generalized internal multiple imaging (GIMI). In one example, among others, a method includes generating a higher order internal multiple image using a background Green\\'s function and rendering the higher order internal multiple image for presentation. In another example, a system includes a computing device and a generalized internal multiple imaging (GIMI) application executable in the computing device. The GIMI application includes logic that generates a higher order internal multiple image using a background Green\\'s function and logic that renders the higher order internal multiple image for display on a display device. In another example, a non-transitory computer readable medium has a program executable by processing circuitry that generates a higher order internal multiple image using a background Green\\'s function and renders the higher order internal multiple image for display on a display device.

  14. Electrochemical components

    CERN Document Server

    Pera, Marie-Cécile; Gualous, Hamid; Turpin, Christophe

    2013-01-01

    Marie-Cécile Péra is Full Professor at the University of Franche-Comte in France and Deputy Director of the FEMTO-ST Institute (CNRS). Her research activities include modeling, control and diagnosis of electrical power generation systems (fuel cells - PEMFC and SOFC, supercapacities, batteries) for transportation and stationary applications. Daniel Hissel is Full Professor at the University of Franche-Comte in France and Director of the Fuel Cell Lab Research Federation (CNRS). He also leads a research team devoted to hybrid electrical systems in the FEMTO-ST Institute (CNRS). Hamid Gualo

  15. Multiple sclerosis.

    Science.gov (United States)

    Thompson, Alan J; Baranzini, Sergio E; Geurts, Jeroen; Hemmer, Bernhard; Ciccarelli, Olga

    2018-03-22

    Multiple sclerosis continues to be a challenging and disabling condition but there is now greater understanding of the underlying genetic and environmental factors that drive the condition, including low vitamin D levels, cigarette smoking, and obesity. Early and accurate diagnosis is crucial and is supported by diagnostic criteria, incorporating imaging and spinal fluid abnormalities for those presenting with a clinically isolated syndrome. Importantly, there is an extensive therapeutic armamentarium, both oral and by infusion, for those with the relapsing remitting form of the disease. Careful consideration is required when choosing the correct treatment, balancing the side-effect profile with efficacy and escalating as clinically appropriate. This move towards more personalised medicine is supported by a clinical guideline published in 2018. Finally, a comprehensive management programme is strongly recommended for all patients with multiple sclerosis, enhancing health-related quality of life through advocating wellness, addressing aggravating factors, and managing comorbidities. The greatest remaining challenge for multiple sclerosis is the development of treatments incorporating neuroprotection and remyelination to treat and ultimately prevent the disabling, progressive forms of the condition. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Parenting Multiples

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Parenting Multiples KidsHealth / For Parents / Parenting Multiples What's in ... your ability to take care of your babies. Parenting Issues With Multiples It may be difficult to ...

  17. SBA Network Components & Software Inventory

    Data.gov (United States)

    Small Business Administration — SBA’s Network Components & Software Inventory contains a complete inventory of all devices connected to SBA’s network including workstations, servers, routers,...

  18. Multiview Bayesian Correlated Component Analysis

    DEFF Research Database (Denmark)

    Kamronn, Simon Due; Poulsen, Andreas Trier; Hansen, Lars Kai

    2015-01-01

    are identical. Here we propose a hierarchical probabilistic model that can infer the level of universality in such multiview data, from completely unrelated representations, corresponding to canonical correlation analysis, to identical representations as in correlated component analysis. This new model, which...... we denote Bayesian correlated component analysis, evaluates favorably against three relevant algorithms in simulated data. A well-established benchmark EEG data set is used to further validate the new model and infer the variability of spatial representations across multiple subjects....

  19. Fabricating nuclear components

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Activities of the Nuclear Engineering Division of Vickers Ltd., particularly fabrication of long slim tubular components for power reactors and the construction of irradiation loops and rigs, are outlined. The processes include hydraulic forming for fabrication of various types of tubes and outer cases of fuel transfer buckets, various specialised welding operations including some applications of the TIG process, and induction brazing of specialised assemblies. (U.K.)

  20. Solid state lighting component

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Thomas; Keller, Bernd; Tarsa, Eric; Ibbetson, James; Morgan, Frederick; Dowling, Kevin; Lys, Ihor

    2017-10-17

    An LED component according to the present invention comprising an array of LED chips mounted on a submount with the LED chips capable of emitting light in response to an electrical signal. The array can comprise LED chips emitting at two colors of light wherein the LED component emits light comprising the combination of the two colors of light. A single lens is included over the array of LED chips. The LED chip array can emit light of greater than 800 lumens with a drive current of less than 150 milli-Amps. The LED chip component can also operate at temperatures less than 3000 degrees K. In one embodiment, the LED array is in a substantially circular pattern on the submount.

  1. Encyclopedia of Software Components

    Science.gov (United States)

    Warren, Lloyd V. (Inventor); Beckman, Brian C. (Inventor)

    1997-01-01

    Intelligent browsing through a collection of reusable software components is facilitated with a computer having a video monitor and a user input interface such as a keyboard or a mouse for transmitting user selections, by presenting a picture of encyclopedia volumes with respective visible labels referring to types of software, in accordance with a metaphor in which each volume includes a page having a list of general topics under the software type of the volume and pages having lists of software components for each one of the generic topics, altering the picture to open one of the volumes in response to an initial user selection specifying the one volume to display on the monitor a picture of the page thereof having the list of general topics and altering the picture to display the page thereof having a list of software components under one of the general topics in response to a next user selection specifying the one general topic, and then presenting a picture of a set of different informative plates depicting different types of information about one of the software components in response to a further user selection specifying the one component.

  2. Multiple Sclerosis

    Science.gov (United States)

    Multiple sclerosis (MS) is a nervous system disease that affects your brain and spinal cord. It damages the ... attacks healthy cells in your body by mistake. Multiple sclerosis affects women more than men. It often begins ...

  3. Moly99 Production Facility: Report on Beamline Components, Requirements, Costs

    Energy Technology Data Exchange (ETDEWEB)

    Bishofberger, Kip A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-23

    In FY14 we completed the design of the beam line for the linear accelerator production design concept. This design included a set of three bending magnets, quadrupole focusing magnets, and octopoles to flatten the beam on target. This design was generic and applicable to multiple different accelerators if necessary. In FY15 we built on that work to create specifications for the individual beam optic elements, including power supply requirements. This report captures the specification of beam line components with initial cost estimates for the NorthStar production facility.This report is organized as follows: The motivation of the beamline design is introduced briefly, along with renderings of the design. After that, a specific list is provided, which accounts for each beamline component, including part numbers and costs, to construct the beamline. After that, this report details the important sections of the beamline and individual components. A final summary and list of follow-on activities completes this report.

  4. Multiple Endpoints

    OpenAIRE

    Parys, Dariusz

    2007-01-01

    In ANOVA we are mainly based on inter-treatment comparisons. Another common problems arising in biometric studies (especially in biomedical studies) is that of comparing two groups of patients (treatment and a control group) based on multiple response (called multiple endpoints). In this paper we present the continuos and discrete approaches to multiple endpoints. In the case of continuous multiple endpoints we have common assumption in that the covariance matrices in group ...

  5. Artefactual multiplicity

    DEFF Research Database (Denmark)

    Bjørn, Pernille; Hertzum, Morten

    2011-01-01

    Whiteboards are highly important to the work in emergency departments (EDs). As a collaborative technology ED whiteboards are usually placed in the dynamic centre of the ED, and all ED staff will approach the whiteboard regularly to organize their individual yet interdependent work. Currently, di...... this characteristic of heterogeneous artefacts; namely artefactual multiplicity. Artefactual multiplicity identifies not only the multiple functions of heterogeneous artefacts but also the intricate relations between these multiple functionalities....

  6. Finger Multiplication

    Science.gov (United States)

    Simanihuruk, Mudin

    2011-01-01

    Multiplication facts are difficult to teach. Therefore many researchers have put a great deal of effort into finding multiplication strategies. Sherin and Fuson (2005) provided a good survey paper on the multiplication strategies research area. Kolpas (2002), Rendtorff (1908), Dabell (2001), Musser (1966) and Markarian (2009) proposed the finger…

  7. General presentation including new structure

    Science.gov (United States)

    Soons, A.

    2002-12-01

    Electrical, electronic and electro-mechanical components play an essential role in the functional performance, quality, life cycle and costs of space systems. Their standardisation, product specification, development, evaluation, qualification and procurement must be based on a coherent and efficient approach, paying due attention to present and prospective European space policies and must be commensurate with user needs, market developments and technology trends. The European Space Components Coordination (ESCC) is established with the objective of harmonising the efforts concerning the various aspects of EEE space components by ESA. European national and international public space organisations, the component manufacturers and the user industries. The goal of the ESCC is to improve the availability of strategic EEE space components with the required performance and at affordable costs for institutional and commercial space programmes. It is the objective of ESCC to achieve this goal by harmonising the resources and development efforts for space components in the ESA Member States and by providing a single and unified system for the standardisation, product specification, evaluation, qualification and procurement of European EEE space components and for the certification of components and component manufacturers.

  8. Multiplicity Counting

    Energy Technology Data Exchange (ETDEWEB)

    Geist, William H. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-01

    This set of slides begins by giving background and a review of neutron counting; three attributes of a verification item are discussed: 240Pueff mass; α, the ratio of (α,n) neutrons to spontaneous fission neutrons; and leakage multiplication. It then takes up neutron detector systems – theory & concepts (coincidence counting, moderation, die-away time); detector systems – some important details (deadtime, corrections); introduction to multiplicity counting; multiplicity electronics and example distributions; singles, doubles, and triples from measured multiplicity distributions; and the point model: multiplicity mathematics.

  9. Component Control System for a Vehicle

    Science.gov (United States)

    Fraser-Chanpong, Nathan (Inventor); Spain, Ivan (Inventor); Dawson, Andrew D. (Inventor); Bluethmann, William J. (Inventor); Lee, Chunhao J. (Inventor); Vitale, Robert L. (Inventor); Guo, Raymond (Inventor); Waligora, Thomas M. (Inventor); Akinyode, Akinjide Akinniyi (Inventor); Reed, Ryan M. (Inventor)

    2016-01-01

    A vehicle includes a chassis, a modular component, and a central operating system. The modular component is supported by the chassis. The central operating system includes a component control system, a primary master controller, and a secondary master controller. The component control system is configured for controlling the modular component. The primary and secondary master controllers are in operative communication with the component control system. The primary and secondary master controllers are configured to simultaneously transmit commands to the component control system. The component control system is configured to accept commands from the secondary master controller only when a fault occurs in the primary master controller.

  10. ITER plasma facing components

    International Nuclear Information System (INIS)

    Kuroda, T.; Vieider, G.; Akiba, M.

    1991-01-01

    This document summarizes results of the Conceptual Design Activities (1988-1990) for the International Thermonuclear Experimental Reactor (ITER) project, namely those that pertain to the plasma facing components of the reactor vessel, of which the main components are the first wall and the divertor plates. After an introduction and an executive summary, the principal functions of the plasma-facing components are delineated, i.e., (i) define the low-impurity region within which the plasma is produced, (ii) absorb the electromagnetic radiation and charged-particle flux from the plasma, and (iii) protect the blanket/shield components from the plasma. A list of critical design issues for the divertor plates and the first wall is given, followed by discussions of the divertor plate design (including the issues of material selection, erosion lifetime, design concepts, thermal and mechanical analysis, operating limits and overall lifetime, tritium inventory, baking and conditioning, safety analysis, manufacture and testing, and advanced divertor concepts) and the first wall design (armor material and design, erosion lifetime, overall design concepts, thermal and mechanical analysis, lifetime and operating limits, tritium inventory, baking and conditioning, safety analysis, manufacture and testing, an alternative first wall design, and the limiters used instead of the divertor plates during start-up). Refs, figs and tabs

  11. Induction of a chronic disease state in patients with smoldering or indolent multiple myeloma by targeting interleukin 1{beta}-induced interleukin 6 production and the myeloma proliferative component.

    Science.gov (United States)

    Lust, John A; Lacy, Martha Q; Zeldenrust, Steven R; Dispenzieri, Angela; Gertz, Morie A; Witzig, Thomas E; Kumar, Shaji; Hayman, Suzanne R; Russell, Stephen J; Buadi, Francis K; Geyer, Susan M; Campbell, Megan E; Kyle, Robert A; Rajkumar, S Vincent; Greipp, Philip R; Kline, Michael P; Xiong, Yuning; Moon-Tasson, Laurie L; Donovan, Kathleen A

    2009-02-01

    To conduct in vitro studies as well as a phase 2 clinical trial in patients with smoldering or indolent multiple myeloma to determine if interleukin 1 (IL-1) inhibitors can delay or prevent active myeloma. Stromal cells were cocultured with IL-1beta-expressing myeloma cells in the presence of dexamethasone, IL-1 receptor antagonist (IL-1Ra), or both. Levels of interleukin 6 (IL-6) and of apoptosis were also quantified. Between November 19, 2002, and May 24, 2007, 47 patients were enrolled in the study and subsequently treated with IL-1Ra. In 25 (53%) of the 47 study patients, low-dose dexamethasone (20 mg/wk) was added. The primary end point was progression-free survival (PFS). In vitro, IL-1Ra was superior to dexamethasone at inhibiting IL-6 production; maximal IL-6 inhibition and apoptosis induction were achieved by addition of both IL-1Ra and dexamethasone. In the clinical trial, 3 patients achieved a minor response to IL-1Ra alone; 5 patients achieved a partial response and 4 patients a minor response after addition of dexamethasone. Seven patients showed a decrease in the plasma cell labeling index that paralleled a decrease in high-sensitivity C-reactive protein (hs-CRP) levels. The median overall PFS was 37.5 months. The median PFS for patients without (n=12) or with (n=35) a greater than 15% decrease in 6-month vs baseline hs-CRP levels was 6 months and more than 3 years, respectively (P=.002). Disease stability was maintained in 8 patients who received therapy for more than 4 years. In patients with smoldering or indolent multiple myeloma who were at risk of progression to active myeloma, treatment with IL-1 inhibitors decreased the myeloma proliferative rate and hs-CRP levels in those who responded, leading to a chronic disease state and an improved PFS. clinicaltrials.gov identifier: NCT00635154.

  12. Secure coupling of hardware components

    NARCIS (Netherlands)

    Hoepman, J.H.; Joosten, H.J.M.; Knobbe, J.W.

    2011-01-01

    A method and a system for securing communication between at least a first and a second hardware components of a mobile device is described. The method includes establishing a first shared secret between the first and the second hardware components during an initialization of the mobile device and,

  13. Developing a Model Component

    Science.gov (United States)

    Fields, Christina M.

    2013-01-01

    The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

  14. Musculoskeletal ultrasound including definitions for ultrasonographic pathology

    DEFF Research Database (Denmark)

    Wakefield, RJ; Balint, PV; Szkudlarek, Marcin

    2005-01-01

    Ultrasound (US) has great potential as an outcome in rheumatoid arthritis trials for detecting bone erosions, synovitis, tendon disease, and enthesopathy. It has a number of distinct advantages over magnetic resonance imaging, including good patient tolerability and ability to scan multiple joint...

  15. Cooled electronic system with liquid-cooled cold plate and thermal spreader coupled to electronic component

    Energy Technology Data Exchange (ETDEWEB)

    Chainer, Timothy J.; Graybill, David P.; Iyengar, Madhusudan K.; Kamath, Vinod; Kochuparambil, Bejoy J.; Schmidt, Roger R.; Steinke, Mark E.

    2018-03-27

    Apparatus and method are provided for facilitating cooling of an electronic component. The apparatus includes a liquid-cooled cold plate and a thermal spreader associated with the cold plate. The cold plate includes multiple coolant-carrying channel sections extending within the cold plate, and a thermal conduction surface with a larger surface area than a surface area of the component to be cooled. The thermal spreader includes one or more heat pipes including multiple heat pipe sections. One or more heat pipe sections are partially aligned to a first region of the cold plate, that is, where aligned to the surface to be cooled, and partially aligned to a second region of the cold plate, which is outside the first region. The one or more heat pipes facilitate distribution of heat from the electronic component to coolant-carrying channel sections of the cold plate located in the second region of the cold plate.

  16. Multiple sclerosis

    International Nuclear Information System (INIS)

    Grunwald, I.Q.; Kuehn, A.L.; Backens, M.; Papanagiotou, P.; Shariat, K.; Kostopoulos, P.

    2008-01-01

    Multiple sclerosis is the most common chronic inflammatory disease of myelin with interspersed lesions in the white matter of the central nervous system. Magnetic resonance imaging (MRI) plays a key role in the diagnosis and monitoring of white matter diseases. This article focuses on key findings in multiple sclerosis as detected by MRI. (orig.) [de

  17. Optical communication components

    Science.gov (United States)

    Eldada, Louay

    2004-03-01

    We review and contrast key technologies developed to address the optical components market for communication applications. We first review the component requirements from a network perspective. We then look at different material systems, compare their properties, and describe the functions achieved to date in each of them. The material systems reviewed include silica fiber, silica on silicon, silicon on insulator, silicon oxynitride, sol-gels, polymers, thin-film dielectrics, lithium niobate, indium phosphide, gallium arsenide, magneto-optic materials, and birefringent crystals. We then describe the most commonly used classes of optical device technology and present their pros and cons as well as the functions achieved to date in each of them. The technologies reviewed include passive, actuation, and active technologies. The passive technologies described include fused fibers, dispersion-compensating fiber, beam steering, Bragg gratings, diffraction gratings, holographic elements, thin-film filters, photonic crystals, microrings, and birefringent elements. The actuation technologies include thermo-optics, electro-optics, acousto-optics, magneto-optics, electroabsorption, liquid crystals, total internal reflection technologies, and mechanical actuation. The active technologies include heterostructures, quantum wells, rare-earth doping, dye doping, Raman amplification, and semiconductor amplification. We also investigate the use of different material systems and device technologies to achieve building-block functions, including lasers, amplifiers, detectors, modulators, polarization controllers, couplers, filters, switches, attenuators, isolators, circulators, wavelength converters, chromatic dispersion compensators, and polarization mode dispersion compensators. Some of the technologies presented are well established in the industry and in some cases have reached the commodity stage, others have recently become ready for commercial introduction, while some others

  18. Pinatubo Emulation in Multiple Models (POEMs): co-ordinated experiments in the ISA-MIP model intercomparison activity component of the SPARC Stratospheric Sulphur and it's Role in Climate initiative (SSiRC)

    Science.gov (United States)

    Lee, Lindsay; Mann, Graham; Carslaw, Ken; Toohey, Matthew; Aquila, Valentina

    2016-04-01

    The World Climate Research Program's SPARC initiative has a new international activity "Stratospheric Sulphur and its Role in Climate" (SSiRC) to better understand changes in stratospheric aerosol and precursor gaseous sulphur species. One component of SSiRC involves an intercomparison "ISA-MIP" of composition-climate models that simulate the stratospheric aerosol layer interactively. Within PoEMS each modelling group will run a "perturbed physics ensemble" (PPE) of interactive stratospheric aerosol (ISA) simulations of the Pinatubo eruption, varying several uncertain parameters associated with the eruption's SO2 emissions and model processes. A powerful new technique to quantify and attribute sources of uncertainty in complex global models is described by Lee et al. (2011, ACP). The analysis uses Gaussian emulation to derive a probability density function (pdf) of predicted quantities, essentially interpolating the PPE results in multi-dimensional parameter space. Once trained on the ensemble, a Monte Carlo simulation with the fast Gaussian emulator enabling a full variance-based sensitivity analysis. The approach has already been used effectively by Carslaw et al., (2013, Nature) to quantify the uncertainty in the cloud albedo effect forcing from a 3D global aerosol-microphysics model allowing to compare the sensitivy of different predicted quantities to uncertainties in natural and anthropogenic emissions types, and structural parameters in the models. Within ISA-MIP, each group will carry out a PPE of runs, with the subsequent analysis with the emulator assessing the uncertainty in the volcanic forcings predicted by each model. In this poster presentation we will give an outline of the "PoEMS" analysis, describing the uncertain parameters to be varied and the relevance to further understanding differences identified in previous international stratospheric aerosol assessments.

  19. Analysis of Sheng-Mai-San, a Ginseng-Containing Multiple Components Traditional Chinese Herbal Medicine Using Liquid Chromatography Tandem Mass Spectrometry and Physical Examination by Electron and Light Microscopies.

    Science.gov (United States)

    Cheng, Yung-Yi; Tsai, Tung-Hu

    2016-09-01

    Sheng-Mai-San is a multi-component traditional Chinese herbal preparation. Due to the fact granulated additives, such as starch, carboxymethyl cellulose, lactose and raw herbal powder may alter the content of the bioactive markers in the herbal products, a developed ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) method was used to measure the herbal biomarkers of ginsenoside Rb₁, Rb₂, Rc, Rd, Re, Rg₁, Rh₁, compound K, ophiopogonin D and schizandrin from the Sheng-Mai-San herbal formulation. Besides, scanning electron microscopy (SEM) was used to observe the morphology of the herbal granular powders. Light microscopy with Congo red and iodine-KI reagent staining was used to identify the cellulose fiber and cornstarch added to pharmaceutical herbal products. The swelling power (SP), water solubility index (WSI), and crude fiber analysis were used to determine the contents of cellulose fiber and cornstarch in pharmaceutical herbal products. In this study, we developed a novel skill to assess the quantification of appended cornstarch in pharmaceutical herbal products using Aperio ImageScope software. Compared with the traditional cornstarch analysis, our analysis method is a rapid, simple and conversion process which could be applied to detect the percentage of added cornstarch in unknown powder products. The various range of the herbal content for the five pharmaceutical manufacturers varied by up to several hundreds-fold. The physical examination reveals that the morphology of the herbal pharmaceutical products is rough and irregular with sharp layers. This study provides a reference standard operating procedure guide for the quality control of the Chinese herbal pharmaceutical products of Sheng-Mai-San.

  20. Multiple myeloma.

    LENUS (Irish Health Repository)

    Collins, Conor D

    2012-02-01

    Advances in the imaging and treatment of multiple myeloma have occurred over the past decade. This article summarises the current status and highlights how an understanding of both is necessary for optimum management.

  1. Multiple Sclerosis

    Science.gov (United States)

    ... read or download the National Academies/Institute of Medicine report, go to: " Multiple Sclerosis: Current Status and Strategies for the Future ." Information from the National Library of Medicine’s MedlinePlus ...

  2. Mitigating component performance variation

    Science.gov (United States)

    Gara, Alan G.; Sylvester, Steve S.; Eastep, Jonathan M.; Nagappan, Ramkumar; Cantalupo, Christopher M.

    2018-01-09

    Apparatus and methods may provide for characterizing a plurality of similar components of a distributed computing system based on a maximum safe operation level associated with each component and storing characterization data in a database and allocating non-uniform power to each similar component based at least in part on the characterization data in the database to substantially equalize performance of the components.

  3. Variability and component composition

    NARCIS (Netherlands)

    T. van der Storm (Tijs)

    2004-01-01

    textabstractIn component-based product populations, feature models have to be described at the component level to be able to benefit from a product family approach. As a consequence, composition of components becomes very complex. We describe how component-level variability can be managed in the

  4. Design of microstrip components by computer

    Science.gov (United States)

    Cisco, T. C.

    1972-01-01

    Development of computer programs for component analysis and design aids used in production of microstrip components is discussed. System includes designs for couplers, filters, circulators, transformers, power splitters, diode switches, and attenuators.

  5. Additive Manufacturing of Aerospace Propulsion Components

    Science.gov (United States)

    Misra, Ajay K.; Grady, Joseph E.; Carter, Robert

    2015-01-01

    The presentation will provide an overview of ongoing activities on additive manufacturing of aerospace propulsion components, which included rocket propulsion and gas turbine engines. Future opportunities on additive manufacturing of hybrid electric propulsion components will be discussed.

  6. Ageing of zirconium alloy components

    Science.gov (United States)

    Chatterjee, S.; Shah, Priti Kotak; Dubey, J. S.

    2008-12-01

    India has two types (pressurized heavy water reactors (PHWRs) and boiling water reactors (BWRs)) of commercial nuclear reactors in operation, in addition to research reactors. Many of the life limiting critical components in these reactors are fabricated from zirconium alloys. The progressive degradation of these components caused by the cumulative exposure of high energy neutron irradiation with increasing period of reactor operation was monitored to assess the degree of ageing. The components/specimens examined included fuel element claddings removed from BWRs, pressure tubes and garter springs removed from PHWRs and calandria tube specimens used in PHWRs. The tests included tension test (for cladding, garter spring), fracture toughness test (for pressure tube), crush test (for garter spring), and measurement of irradiation induced growth (for calandria tube). Results of various tests conducted are presented and applications of the test results are elaborated for residual life estimation/life extension of the components.

  7. Understanding symmetrical components for power system modeling

    CERN Document Server

    Das, J C

    2017-01-01

    This book utilizes symmetrical components for analyzing unbalanced three-phase electrical systems, by applying single-phase analysis tools. The author covers two approaches for studying symmetrical components; the physical approach, avoiding many mathematical matrix algebra equations, and a mathematical approach, using matrix theory. Divided into seven sections, topics include: symmetrical components using matrix methods, fundamental concepts of symmetrical components, symmetrical components –transmission lines and cables, sequence components of rotating equipment and static load, three-phase models of transformers and conductors, unsymmetrical fault calculations, and some limitations of symmetrical components.

  8. Prospective Evaluation of Magnetic Resonance Imaging and [18F]Fluorodeoxyglucose Positron Emission Tomography-Computed Tomography at Diagnosis and Before Maintenance Therapy in Symptomatic Patients With Multiple Myeloma Included in the IFM/DFCI 2009 Trial: Results of the IMAJEM Study.

    Science.gov (United States)

    Moreau, Philippe; Attal, Michel; Caillot, Denis; Macro, Margaret; Karlin, Lionel; Garderet, Laurent; Facon, Thierry; Benboubker, Lotfi; Escoffre-Barbe, Martine; Stoppa, Anne-Marie; Laribi, Kamel; Hulin, Cyrille; Perrot, Aurore; Marit, Gerald; Eveillard, Jean-Richard; Caillon, Florence; Bodet-Milin, Caroline; Pegourie, Brigitte; Dorvaux, Veronique; Chaleteix, Carine; Anderson, Kenneth; Richardson, Paul; Munshi, Nikhil C; Avet-Loiseau, Herve; Gaultier, Aurelie; Nguyen, Jean-Michel; Dupas, Benoit; Frampas, Eric; Kraeber-Bodere, Françoise

    2017-09-01

    Purpose Magnetic resonance imaging (MRI) and positron emission tomography-computed tomography (PET-CT) are important imaging techniques in multiple myeloma (MM). We conducted a prospective trial in patients with MM aimed at comparing MRI and PET-CT with respect to the detection of bone lesions at diagnosis and the prognostic value of the techniques. Patients and Methods One hundred thirty-four patients received a combination of lenalidomide, bortezomib, and dexamethasone (RVD) with or without autologous stem-cell transplantation, followed by lenalidomide maintenance. PET-CT and MRI were performed at diagnosis, after three cycles of RVD, and before maintenance therapy. The primary end point was the detection of bone lesions at diagnosis by MRI versus PET-CT. Secondary end points included the prognostic impact of MRI and PET-CT regarding progression-free (PFS) and overall survival (OS). Results At diagnosis, MRI results were positive in 127 of 134 patients (95%), and PET-CT results were positive in 122 of 134 patients (91%; P = .33). Normalization of MRI after three cycles of RVD and before maintenance was not predictive of PFS or OS. PET-CT became normal after three cycles of RVD in 32% of the patients with a positive evaluation at baseline, and PFS was improved in this group (30-month PFS, 78.7% v 56.8%, respectively). PET-CT normalization before maintenance was described in 62% of the patients who were positive at baseline. This was associated with better PFS and OS. Extramedullary disease at diagnosis was an independent prognostic factor for PFS and OS, whereas PET-CT normalization before maintenance was an independent prognostic factor for PFS. Conclusion There is no difference in the detection of bone lesions at diagnosis when comparing PET-CT and MRI. PET-CT is a powerful tool to evaluate the prognosis of de novo myeloma.

  9. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, Egon; Stenager, E N; Knudsen, Lone

    1994-01-01

    In a cross-sectional study of 117 randomly selected patients (52 men, 65 women) with definite multiple sclerosis, it was found that 76 percent were married or cohabitant, 8 percent divorced. Social contacts remained unchanged for 70 percent, but outgoing social contacts were reduced for 45 percent......, need for structural changes in home and need for pension became greater with increasing physical handicap. No significant differences between gender were found. It is concluded that patients and relatives are under increased social strain, when multiple sclerosis progresses to a moderate handicap...

  10. De-chlorination and solidification of radioactive LiCl waste salt by using SiO{sub 2}-Al{sub 2}O{sub 3}-P{sub 2}O{sub 5} (SAP) inorganic composite including B{sub 2}O{sub 3} component

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ki Rak; Park, Hwan-Seo; Cho, In-Hak; Choi, Jung-Hoon; Eun, Hee-Chul; Lee, Tae-Kyo; Han, Seung Youb; Ahn, Do-Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2017-09-15

    SAP (SiO{sub 2}-Al{sub 2}O{sub 3}-P{sub 2}O{sub 5}) composite has been recently studied in KAERI to deal with the immobilization of radioactive salt waste, one of the most problematic wastes in the pyro-chemical process. Highly unstable salt waste was successfully converted into stable compounds by the dechlorination process with SAPs, and then a durable waste form with a high waste loading was produced when adding glassy materials to dechlorination product. In the present study, U-SAP composite which is SAP bearing glassy component (Boron) was synthesized to remove the adding and mixing steps of glassy materials for a monolithic wasteform. With U-SAPs prepared by a sol-gel process, a series of wasteforms were fabricated to identify a proper reaction condition. Physical and chemical properties of dechlorination products and U-SAP wasteforms were characterized by XRD, DSC, SEM, TGA and PCT-A. A U-SAP wasteform showed suitable properties as a radioactive wasteform such as dense surface morphology, high waste loading, and high durability at the optimized U-SAP/salt ratio 2.

  11. Components selection for ageing management

    International Nuclear Information System (INIS)

    Mingiuc, C.; Vidican, D.

    2002-01-01

    Full text: The paper presents a synthesis of methods and activities realized for the selection of critical components to assure plant safety and availability (as electricity supplier). There are presented main criteria for selection, screening process. For the resulted categories of components shall be applied different category of maintenance (condition oriented, scheduled or corrective), function of the importance and financial effort necessary to fulfil the task. 1. Systems and components screening for plant safety assurance For the systems selection, from Safety point of view, was necessary first, to define systems which are dangerous in case of failure (mainly by rupture/ release of radioactivity) and the safety systems which have to mitigate the effects. This is realized based on accident analysis (from Safety Report). Also where taken in to account the 4 basic Safety Principles: 'Reactor shut down; Residual heat removal; Radioactivity products confinement; NPP status monitoring in normal and accident conditions'. Following step is to establish safety support systems, which have to action to assure main safety systems operation. This could be realized based on engineering judgement, or on PSA Level I analysis. Finally shall be realized chains of the support systems, which have to work, till primary systems. For the critical components selection, was realized a Failure Mode and Effect Analysis (FMEA), considering the components effects of failures, on system safety function. 2. Systems and components screening for plant availability assurance The work was realized in two steps: Systems screening; Components screening The systems screening, included: General, analyze of the plant systems list and the definition of those which clearly have to run continue to assure the nominal power; Realization of a complex diagram to define interdependence between the systems (e.g. PHT and auxiliaries, moderator and auxiliaries, plant electrical diagram); Fill of special

  12. Smoldering Multiple Myeloma

    OpenAIRE

    Gao, Minjie; Yang, Guang; Kong, Yuanyuan; Wu, Xiaosong; Shi, Jumei

    2015-01-01

    Smoldering multiple myeloma (SMM) is an asymptomatic precursor stage of multiple myeloma (MM) characterized by clonal bone marrow plasma cells (BMPC) ≥ 10% and/or M protein level ≥ 30 g/L in the absence of end organ damage. It represents an intermediate stage between monoclonal gammopathy of undetermined significance (MGUS) and symptomatic MM. The risk of progression to symptomatic MM is not uniform, and several parameters have been reported to predict the risk of progression. These include t...

  13. Smoldering multiple myeloma

    OpenAIRE

    Rajkumar, S. Vincent; Landgren, Ola; Mateos, María-Victoria

    2015-01-01

    Smoldering multiple myeloma (SMM) is an asymptomatic clonal plasma cell disorder. SMM is distinguished from monoclonal gammopathy of undetermined significance by a much higher risk of progression to multiple myeloma (MM). There have been major advances in the diagnosis, prognosis, and management of SMM in the last few years. These include a revised disease definition, identification of several new prognostic factors, a classification based on underlying cytogenetic changes, and...

  14. A flexible framework for sparse simultaneous component based data integration

    Directory of Open Access Journals (Sweden)

    Van Deun Katrijn

    2011-11-01

    Full Text Available Abstract 1 Background High throughput data are complex and methods that reveal structure underlying the data are most useful. Principal component analysis, frequently implemented as a singular value decomposition, is a popular technique in this respect. Nowadays often the challenge is to reveal structure in several sources of information (e.g., transcriptomics, proteomics that are available for the same biological entities under study. Simultaneous component methods are most promising in this respect. However, the interpretation of the principal and simultaneous components is often daunting because contributions of each of the biomolecules (transcripts, proteins have to be taken into account. 2 Results We propose a sparse simultaneous component method that makes many of the parameters redundant by shrinking them to zero. It includes principal component analysis, sparse principal component analysis, and ordinary simultaneous component analysis as special cases. Several penalties can be tuned that account in different ways for the block structure present in the integrated data. This yields known sparse approaches as the lasso, the ridge penalty, the elastic net, the group lasso, sparse group lasso, and elitist lasso. In addition, the algorithmic results can be easily transposed to the context of regression. Metabolomics data obtained with two measurement platforms for the same set of Escherichia coli samples are used to illustrate the proposed methodology and the properties of different penalties with respect to sparseness across and within data blocks. 3 Conclusion Sparse simultaneous component analysis is a useful method for data integration: First, simultaneous analyses of multiple blocks offer advantages over sequential and separate analyses and second, interpretation of the results is highly facilitated by their sparseness. The approach offered is flexible and allows to take the block structure in different ways into account. As such

  15. A flexible framework for sparse simultaneous component based data integration.

    Science.gov (United States)

    Van Deun, Katrijn; Wilderjans, Tom F; van den Berg, Robert A; Antoniadis, Anestis; Van Mechelen, Iven

    2011-11-15

    High throughput data are complex and methods that reveal structure underlying the data are most useful. Principal component analysis, frequently implemented as a singular value decomposition, is a popular technique in this respect. Nowadays often the challenge is to reveal structure in several sources of information (e.g., transcriptomics, proteomics) that are available for the same biological entities under study. Simultaneous component methods are most promising in this respect. However, the interpretation of the principal and simultaneous components is often daunting because contributions of each of the biomolecules (transcripts, proteins) have to be taken into account. We propose a sparse simultaneous component method that makes many of the parameters redundant by shrinking them to zero. It includes principal component analysis, sparse principal component analysis, and ordinary simultaneous component analysis as special cases. Several penalties can be tuned that account in different ways for the block structure present in the integrated data. This yields known sparse approaches as the lasso, the ridge penalty, the elastic net, the group lasso, sparse group lasso, and elitist lasso. In addition, the algorithmic results can be easily transposed to the context of regression. Metabolomics data obtained with two measurement platforms for the same set of Escherichia coli samples are used to illustrate the proposed methodology and the properties of different penalties with respect to sparseness across and within data blocks. Sparse simultaneous component analysis is a useful method for data integration: First, simultaneous analyses of multiple blocks offer advantages over sequential and separate analyses and second, interpretation of the results is highly facilitated by their sparseness. The approach offered is flexible and allows to take the block structure in different ways into account. As such, structures can be found that are exclusively tied to one data platform

  16. A flexible framework for sparse simultaneous component based data integration

    Science.gov (United States)

    2011-01-01

    1 Background High throughput data are complex and methods that reveal structure underlying the data are most useful. Principal component analysis, frequently implemented as a singular value decomposition, is a popular technique in this respect. Nowadays often the challenge is to reveal structure in several sources of information (e.g., transcriptomics, proteomics) that are available for the same biological entities under study. Simultaneous component methods are most promising in this respect. However, the interpretation of the principal and simultaneous components is often daunting because contributions of each of the biomolecules (transcripts, proteins) have to be taken into account. 2 Results We propose a sparse simultaneous component method that makes many of the parameters redundant by shrinking them to zero. It includes principal component analysis, sparse principal component analysis, and ordinary simultaneous component analysis as special cases. Several penalties can be tuned that account in different ways for the block structure present in the integrated data. This yields known sparse approaches as the lasso, the ridge penalty, the elastic net, the group lasso, sparse group lasso, and elitist lasso. In addition, the algorithmic results can be easily transposed to the context of regression. Metabolomics data obtained with two measurement platforms for the same set of Escherichia coli samples are used to illustrate the proposed methodology and the properties of different penalties with respect to sparseness across and within data blocks. 3 Conclusion Sparse simultaneous component analysis is a useful method for data integration: First, simultaneous analyses of multiple blocks offer advantages over sequential and separate analyses and second, interpretation of the results is highly facilitated by their sparseness. The approach offered is flexible and allows to take the block structure in different ways into account. As such, structures can be found that are

  17. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E; Knudsen, L; Jensen, K

    1991-01-01

    In a cross-sectional investigation of 116 patients with multiple sclerosis, the social and sparetime activities of the patient were assessed by both patient and his/her family. The assessments were correlated to physical disability which showed that particularly those who were moderately disabled...

  18. Multiple Myeloma

    African Journals Online (AJOL)

    The results of the use of melphalan in 52 patients with multiple myeloma have been analysed. The median survival of the whole group of patients was 30 months, and of those w:th renal insufficiency only 12,5 months. Bence-lones proteinuria was also a poor prognostic finding,. but only because of its association with renal ...

  19. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E; Jensen, K

    1988-01-01

    Forty-two (12%) of a total of 366 patients with multiple sclerosis (MS) had psychiatric admissions. Of these, 34 (81%) had their first psychiatric admission in conjunction with or after the onset of MS. Classification by psychiatric diagnosis showed that there was a significant positive correlati...

  20. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E; Jensen, K

    1990-01-01

    An investigation on the correlation between ability to read TV subtitles and the duration of visual evoked potential (VEP) latency in 14 patients with definite multiple sclerosis (MS), indicated that VEP latency in patients unable to read the TV subtitles was significantly delayed in comparison...

  1. Component failure data handbook

    International Nuclear Information System (INIS)

    Gentillon, C.D.

    1991-04-01

    This report presents generic component failure rates that are used in reliability and risk studies of commercial nuclear power plants. The rates are computed using plant-specific data from published probabilistic risk assessments supplemented by selected other sources. Each data source is described. For rates with four or more separate estimates among the sources, plots show the data that are combined. The method for combining data from different sources is presented. The resulting aggregated rates are listed with upper bounds that reflect the variability observed in each rate across the nuclear power plant industry. Thus, the rates are generic. Both per hour and per demand rates are included. They may be used for screening in risk assessments or for forming distributions to be updated with plant-specific data

  2. Solar bowl component efficiencies

    International Nuclear Information System (INIS)

    O'Hair, E.A.; Green, B.L.

    1992-01-01

    Battelle Pacific Northwest Laboratory has published two volumes on the economic evaluation of various proposed configurations and plant sizes for the four solar thermal technologies. These are the latest in a series of publications sponsored by the Department of Energy (DOE) on plant and operational costs and are more complete in that they include calculations of electrical output. These latest Battelle volumes use the 1976 solar data from Barstow, Calif., and by calculating or estimating the energy conversion efficiency of each element in the process from sun to electricity predict the output and cost of electricity from different plant sizes for each of the four technologies. In this paper a comparison is presented of the component efficiencies developed by Battelle and those of the solar bowl at Crosbyton, Tex

  3. Progress Report on SIMULINK Modelling of RF Cavity Control for SPL Extension to LINAC4 Theory and Analysis behind Simulation Results of SPL Model Using I/Q Components in SIMULINK to Date, Including Lorentz Force Effects and Multiple Cavities Driven by Single Feedback Loop

    CERN Document Server

    Hernandez, M

    2011-01-01

    In the context of a luminosity upgrade for the LHC within the coming years, works have started on LINAC4 to provide an infrastructure for updating the LHC supplier chain. In order to achieve energy levels and particles per bunch necessary for the expected rate of events at LHC detectors and related experiments, a project proposal is underway for an appended Superconducting Proton LINAC (SPL) that will run from the normal conducting LINAC4 and LP-SPL onto the LHC supplier chain. Thus, the SPL will have two main functions: Firstly, to provide H- beam for injection into the PS2 which is compatible with LHC luminosity. For this purpose the SPL will accelerate the output beam of LINAC4 from 1GeV to 4GeV,removing, at the same time, the necessity for PSB operation in the LHC supply chain. Secondly, it will provide an infrastructure upgradeable to meet the needs of all potential high-power proton users at CERN (EURISOL) and possibly neutrino production facilities. For high-power applications of this nature the SPL wi...

  4. Chondrites and their Components

    Science.gov (United States)

    Scott, E. R. D.; Krot, A. N.

    2003-12-01

    What are Chondrites?Chondrites are meteorites that provide the best% clues to the origin of the solar system. They are the oldest known rocks - their components formed during the birth of the solar system ca. 4,567 Ma - and their abundances of nonvolatile elements are close to those in the solar photosphere. Chondrites are broadly ultramafic in composition, consisting largely of iron, magnesium, silicon, and oxygen. The most abundant constituents of chondrites are chondrules, which are igneous particles that crystallized rapidly in minutes to hours. They are composed largely of olivine and pyroxene, commonly contain metallic Fe,Ni and are 0.01-10 mm in size. Some chondrules are rounded as they were once entirely molten but many are irregular in shape because they were only partly melted or because they accreted other particles as they solidified. Chondrites themselves were never molten. The definition of a chondrite has expanded recently with the discovery in Antarctica and the Sahara Desert of extraordinary meteorites with chondrules 10-100 μm in size, and chondrites so rich in metallic Fe,Ni that they were initially classified as iron meteorites with silicate inclusions. Thus, in meteoritics, as in other fields of planetary science, new discoveries sometimes require definitions to be modified.Chondrites are so diverse in their mineralogical and textural characteristics that it is not possible to describe a typical chondrite. We show one with diversely textured chondrules including prominent, aesthetically pleasing, rounded chondrules (Figure 1(a)), and another with more uniformly textured chondrules (Figure 1(b)). Owing to the high abundance of rounded or droplet chondrules in the abundant, so-called "ordinary" chondrites ( Figure 1(a)), studies of the origin of chondrules have commonly been based on these chondrites. (7K)Figure 1. Maps showing magnesium concentrations in two chondrites: (a) PCA91082, a CR2 carbonaceous chondrite, and (b) Tieschitz, an H/L3

  5. Reusable Component Services

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Reusable Component Services (RCS) is a super-catalog of components, services, solutions and technologies that facilitates search, discovery and collaboration in...

  6. Software component quality evaluation

    Science.gov (United States)

    Clough, A. J.

    1991-01-01

    The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

  7. Dissecting Early-type Dwarf Galaxies into Their Multiple Components

    NARCIS (Netherlands)

    Janz, J.; Laurikainen, E.; Lisker, T.; Salo, H.; Peletier, R. F.; Niemi, S. -M.; den Brok, M.; Toloba, E.; Falcon-Barroso, J.; Boselli, A.; Hensler, G.

    2012-01-01

    Early-type dwarf galaxies, once believed to be simple systems, have recently been shown to exhibit an intriguing diversity in structure and stellar content. To analyze this further, we started the SMAKCED project (Stellar content, MAss and Kinematics of Cluster Early-type Dwarfs,

  8. Reactor component automatic grapple

    International Nuclear Information System (INIS)

    Greenaway, P.R.

    1982-01-01

    A grapple for handling nuclear reactor components in a medium such as liquid sodium which, upon proper seating and alignment of the grapple with the component as sensed by a mechanical logic integral to the grapple, automatically seizes the component. The mechanical logic system also precludes seizure in the absence of proper seating and alignment. (author)

  9. Principal component analysis

    NARCIS (Netherlands)

    Bro, R.; Smilde, A.K.

    2014-01-01

    Principal component analysis is one of the most important and powerful methods in chemometrics as well as in a wealth of other areas. This paper provides a description of how to understand, use, and interpret principal component analysis. The paper focuses on the use of principal component analysis

  10. Multiple Parenting

    OpenAIRE

    Dias, Paulo Cezar; Gramstrup, Erik Frederico

    2016-01-01

    With the modification of the family concept in human history, now considered the site of important value, aimed at personal fulfillment of its members, in line with the Federal Constitution of 1988 was enshrined in the principles of human dignity, affection, equal affiliations and plurality of family entities, recognizing the socio-affective parenting, founded in the state of emotional child, and biological, originally from consanguinity ties, arises multiple parenting in response to the full...

  11. Multiple sclerosis

    International Nuclear Information System (INIS)

    Sadashima, Hiromichi; Kusaka, Hirofumi; Imai, Terukuni; Takahashi, Ryosuke; Matsumoto, Sadayuki; Yamamoto, Toru; Yamasaki, Masahiro; Maya, Kiyomi

    1986-01-01

    Eleven patients with a definite diagnosis of multiple sclerosis were examined in terms of correlations between the clinical features and the results of cranial computed tomography (CT), and magnetic resonance imaging (MRI). Results: In 5 of the 11 patients, both CT and MRI demonstrated lesions consistent with a finding of multiple sclerosis. In 3 patients, only MRI demonstrated lesions. In the remaining 3 patients, neither CT nor MRI revealed any lesion in the brain. All 5 patients who showed abnormal findings on both CT and MRI had clinical signs either of cerebral or brainstem - cerebellar lesions. On the other hand, two of the 3 patients with normal CT and MRI findings had optic-nerve and spinal-cord signs. Therefore, our results suggested relatively good correlations between the clinical features, CT, and MRI. MRI revealed cerebral lesions in two of the four patients with clinical signs of only optic-nerve and spinal-cord lesions. MRI demonstrated sclerotic lesions in 3 of the 6 patients whose plaques were not detected by CT. In conclusion, MRI proved to be more helpful in the demonstration of lesions attributable to chronic multiple sclerosis. (author)

  12. Control component structure

    International Nuclear Information System (INIS)

    Walton, L.A.

    1982-01-01

    This invention provides a control component structure comprising: a spider having a plurality of arms, at least one spider bore formed in said plurality of arms, said spider bore including an enlarged recess and a small recess with an upright truncated conical section forming a transition from the enlarged recess to the small recess, and a burnable poison rod including a tube terminating in transverse end, a plug with a chamfered end that leads into a cylindrical portion, said cylindrical portion of the plug snugly fitting within the tube and terminating in a radially protruding shoulder which engages the transverse end of the tube to which it is welded, and a stem protruding in the longitudinal direction from the central portion of the shoulder having a longitudinal stem bore extending through about half of the length of the stem, at least part of the stem which defines the stem bore being fixed within the truncated conical section, the enlarged recess and the small recess of the spider by outward deformation of that part of the stem in order to releasably attach the rod to the spider, said stem being adapted to substantially reshape itself by movement of the rod in a longitudinal direction with respect to the spider bore, while maintaining the structural integrity of the poison rod and maintaining the structural integrity of the spider

  13. Component Fragility Research Program: Phase 1 component prioritization

    International Nuclear Information System (INIS)

    Holman, G.S.; Chou, C.K.

    1987-06-01

    Current probabilistic risk assessment (PRA) methods for nuclear power plants utilize seismic ''fragilities'' - probabilities of failure conditioned on the severity of seismic input motion - that are based largely on limited test data and on engineering judgment. Under the NRC Component Fragility Research Program (CFRP), the Lawrence Livermore National Laboratory (LLNL) has developed and demonstrated procedures for using test data to derive probabilistic fragility descriptions for mechanical and electrical components. As part of its CFRP activities, LLNL systematically identified and categorized components influencing plant safety in order to identify ''candidate'' components for future NRC testing. Plant systems relevant to safety were first identified; within each system components were then ranked according to their importance to overall system function and their anticipated seismic capacity. Highest priority for future testing was assigned to those ''very important'' components having ''low'' seismic capacity. This report describes the LLNL prioritization effort, which also included application of ''high-level'' qualification data as an alternate means of developing probabilistic fragility descriptions for PRA applications

  14. Rehabilitation and multiple sclerosis

    DEFF Research Database (Denmark)

    Dalgas, Ulrik

    2011-01-01

    of their lives, emphasising the importance of rehabilitation in order to maintain quality of life. An important aspect of multiple sclerosis rehabilitation is the preservation of physical functioning. Hot topics in the rehabilitation of physical function include (1) exercise therapy, (2) robot-assisted training......, a paradigm shift is taking place and it is now increasingly acknowledged that exercise therapy is both safe and beneficial. Robot-assisted training is also attracting attention in multiple sclerosis rehabilitation. Several sophisticated commercial robots exist, but so far the number of scientific studies......In a chronic and disabling disease like multiple sclerosis, rehabilitation becomes of major importance in the preservation of physical, psychological and social functioning. Approximately 80% of patients have multiple sclerosis for more than 35 years and most will develop disability at some point...

  15. Multiple constant multiplication optimizations for field programmable gate arrays

    CERN Document Server

    Kumm, Martin

    2016-01-01

    This work covers field programmable gate array (FPGA)-specific optimizations of circuits computing the multiplication of a variable by several constants, commonly denoted as multiple constant multiplication (MCM). These optimizations focus on low resource usage but high performance. They comprise the use of fast carry-chains in adder-based constant multiplications including ternary (3-input) adders as well as the integration of look-up table-based constant multipliers and embedded multipliers to get the optimal mapping to modern FPGAs. The proposed methods can be used for the efficient implementation of digital filters, discrete transforms and many other circuits in the domain of digital signal processing, communication and image processing. Contents Heuristic and ILP-Based Optimal Solutions for the Pipelined Multiple Constant Multiplication Problem Methods to Integrate Embedded Multipliers, LUT-Based Constant Multipliers and Ternary (3-Input) Adders An Optimized Multiple Constant Multiplication Architecture ...

  16. A prediction method based on wavelet transform and multiple models fusion for chaotic time series

    International Nuclear Information System (INIS)

    Zhongda, Tian; Shujiang, Li; Yanhong, Wang; Yi, Sha

    2017-01-01

    In order to improve the prediction accuracy of chaotic time series, a prediction method based on wavelet transform and multiple models fusion is proposed. The chaotic time series is decomposed and reconstructed by wavelet transform, and approximate components and detail components are obtained. According to different characteristics of each component, least squares support vector machine (LSSVM) is used as predictive model for approximation components. At the same time, an improved free search algorithm is utilized for predictive model parameters optimization. Auto regressive integrated moving average model (ARIMA) is used as predictive model for detail components. The multiple prediction model predictive values are fusion by Gauss–Markov algorithm, the error variance of predicted results after fusion is less than the single model, the prediction accuracy is improved. The simulation results are compared through two typical chaotic time series include Lorenz time series and Mackey–Glass time series. The simulation results show that the prediction method in this paper has a better prediction.

  17. Two component systems: physiological effect of a third component.

    Directory of Open Access Journals (Sweden)

    Baldiri Salvado

    Full Text Available Signal transduction systems mediate the response and adaptation of organisms to environmental changes. In prokaryotes, this signal transduction is often done through Two Component Systems (TCS. These TCS are phosphotransfer protein cascades, and in their prototypical form they are composed by a kinase that senses the environmental signals (SK and by a response regulator (RR that regulates the cellular response. This basic motif can be modified by the addition of a third protein that interacts either with the SK or the RR in a way that could change the dynamic response of the TCS module. In this work we aim at understanding the effect of such an additional protein (which we call "third component" on the functional properties of a prototypical TCS. To do so we build mathematical models of TCS with alternative designs for their interaction with that third component. These mathematical models are analyzed in order to identify the differences in dynamic behavior inherent to each design, with respect to functionally relevant properties such as sensitivity to changes in either the parameter values or the molecular concentrations, temporal responsiveness, possibility of multiple steady states, or stochastic fluctuations in the system. The differences are then correlated to the physiological requirements that impinge on the functioning of the TCS. This analysis sheds light on both, the dynamic behavior of synthetically designed TCS, and the conditions under which natural selection might favor each of the designs. We find that a third component that modulates SK activity increases the parameter space where a bistable response of the TCS module to signals is possible, if SK is monofunctional, but decreases it when the SK is bifunctional. The presence of a third component that modulates RR activity decreases the parameter space where a bistable response of the TCS module to signals is possible.

  18. Multiple Sclerosis

    Science.gov (United States)

    ... include: Vision problems, including double vision, blurriness, partial color blindness, eye pain, partial or complete loss of vision in one eye Thinking and memory problems Fatigue Muscle weakness, dizziness or tremor Numbness ...

  19. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, Egon; Stenager, E N; Knudsen, Lone

    1994-01-01

    In a cross-sectional study of 117 randomly selected patients (52 men, 65 women) with definite multiple sclerosis, it was found that 76 percent were married or cohabitant, 8 percent divorced. Social contacts remained unchanged for 70 percent, but outgoing social contacts were reduced for 45 percent....... Ninety-five percent lived in own house or flat and 70 percent received disablement pension. More than half of the patients (56.4 percent) were dependent on help from close relatives, most frequently spouse. The need for help, the risk of divorce, loss of contact with relatives, difficulty in going out...

  20. [Multiple myeloma].

    Science.gov (United States)

    Abe, Masahiro; Miki, Hirokazu; Nakamura, Shingen

    2016-03-01

    Owing to the positive clinical benefits obtained with new agents, complete remission (CR) can be used as a surrogate for overall survival, and should be achieved. Although multiple myeloma is a heterogeneous disease in terms of myeloma cell- and patient-related risk factors, patients should receive the most effective combination therapy based on proteasome inhibitors and/or immunomodulatory drugs (IMiDs) as backbone medication irrespective of the risks encountered in the setting of induction therapy ("one-size-fits-all" therapy), followed by consolidation/maintenance therapy to achieve CR with the ultimate goal of extended survival. Myeloma-defining biomarkers have been established to identify high-risk smoldering myeloma requiring treatment. The development of salvage treatments yielding better outcomes for relapsed/refractory myeloma is urgently needed. Upcoming novel molecular targeting agents with different modes of action and immunotherapeutic agents will be integrated into myeloma treatment regimens with a great therapeutic impact, and further evolution of the treatment paradigm for multiple myeloma is eagerly anticipated.

  1. Multiple inflation

    International Nuclear Information System (INIS)

    Murphy, P.J.

    1987-01-01

    The Theory of Inflation, namely, that at some point the entropy content of the universe was greatly increased, has much promise. It may solve the puzzles of homogeneity and the creation of structure. However, no particle physics model has yet been found that can successfully drive inflation. The difficulty in satisfying the constraint that the isotropy of the microwave background places on the effective potential of prospective models is immense. In this work we have codified the requirements of such models in a most general form. We have carefully calculated the amounts of inflation the various problems of the Standard Model need for their solution. We have derived a completely model independent upper bond on the inflationary Hubble parameter. We have developed a general notation with which to probe the possibilities of Multiple Inflation. We have shown that only in very unlikely circumstances will any evidence of an earlier inflation, survive the de Sitter period of its successor. In particular, it is demonstrated that it is most unlikely that two bouts of inflation will yield high amplitudes of density perturbations on small scales and low amplitudes on large. We conclude that, while multiple inflation will be of great theoretical interest, it is unlikely to have any observational impact

  2. Supply chain components

    Directory of Open Access Journals (Sweden)

    Vieraşu, T.

    2011-01-01

    Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  3. Supply chain components

    OpenAIRE

    Vieraşu, T.; Bălăşescu, M.

    2011-01-01

    In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  4. (including travel dates) Proposed itinerary

    Indian Academy of Sciences (India)

    Ashok

    31 July to 22 August 2012 (including travel dates). Proposed itinerary: Arrival in Bangalore on 1 August. 1-5 August: Bangalore, Karnataka. Suggested institutions: Indian Institute of Science, Bangalore. St Johns Medical College & Hospital, Bangalore. Jawaharlal Nehru Centre, Bangalore. 6-8 August: Chennai, TN.

  5. CORE COMPONENT POT

    Energy Technology Data Exchange (ETDEWEB)

    MARTIN RL; OMBERG RP

    1975-12-19

    The core component pot is an open top vessel used to hold both new and irradiated core components for storage in the IDS and for holding the components submerged in sodium while being trasported inside CLEM. The top of the CCP is equipped with a grapple lip which is engaged by the hoisting grapples. Heat for maintaining the preheat of new components and dissipation of decay heat of irradiated fuel assemblies is conducted between the wall of the pot and the surrounding environment by thermal radiation and convection.

  6. Strategies for replacement of obsolete equipment, including reverse engineering

    International Nuclear Information System (INIS)

    Irish, C.S.

    2003-01-01

    The presentation shall detail the challenges facing nuclear power plants with the replacement of obsolete equipment and the strategies used to overcome those challenges. The presentation will outline the common equipment types which are either obsolete or are becoming obsolete, with a focus on safety related components. The four options of the obsolete equipment replacement philosophy will be presented with replacement examples from each of the options shown for discussion purposes. Detailed examples from each of the four obsolete equipment replacement options of, (1) commercially available equivalent component, (2) modification of a commercial available component, (3) reverse engineering of the original component and finally (4) design changes using a new component, shall be presented to evaluate the advantages and disadvantages of each option. The presentation will include the technical challenges, cost and schedule concerns for each of the four options. Emphasis will be placed on the technological challenges associated with replacing old and obsolete equipment. The following is a bullet list of the challenges which will be discussed: 1) Missing, misleading or no information on the original component. 2) Acquiring information from the original equipment manufacturer and the plant. 3) Using a sample component for the replacement evaluation and or reverse engineering. 4) Reverse engineering old equipment with newly available discrete components. The presentation will include the equivalency documentation using the EPRI guidelines when replacing an original component with a different yet form, fit and functional equivalent component. The presentation will conclude with a discussion of the advantages and disadvantages of the replacement of the obsolete component with a form, fit and functional equivalent component vs. the replacement of the original component with a new component with today's technology. (author)

  7. Strategies for replacement of obsolete equipment - including reverse engineering

    International Nuclear Information System (INIS)

    Irish, C.S.

    2000-01-01

    The presentation shall detail the challenges facing nuclear power plants with the replacement of obsolete equipment and the strategies used to overcome those challenges. The presentation will outline the common equipment types which are either obsolete or are becoming obsolete, with a focus on safety related components. The four options of the obsolete equipment replacement philosophy will be presented with replacement examples from each of the options shown for discussion purposes. Detailed examples from each of the four obsolete equipment replacement options of: commercially available equivalent component; modification of a commercial available component; reverse engineering of the original component; and finally, design changes using a new component, shall be presented to evaluate the advantages and disadvantages of each option. The presentation will include the technical challenges, cost and schedule concerns for each of the four options. Emphasis will be placed on the technological challenges associated with replacing old and obsolete equipment. The following is a bullet list of the challenges which will be discussed: Missing, misleading or no information on the original component; Acquiring information from the original equipment manufacturer and the plant; Using a sample component for the replacement evaluation and or reverse engineering; and Reverse engineering old equipment with newly available discrete components. The presentation will include the equivalency documentation using the EPRI guidelines when replacing an original component with a different yet form, fit and functional equivalent component. The presentation will conclude with a discussion of the advantages and disadvantages of the replacement of the obsolete component with a form, fit and functional equivalent component vs. the replacement of the original component with a new component with today's technology. (author)

  8. Multiple sex partner

    African Journals Online (AJOL)

    User

    performance, knowledge, and attitude toward sex were risk factors for students having sex. However, risk factors for multiple sex partners included working in a places of .... education. Premarital sex and commercial sex were considered unacceptable by 89 vs. 94% of females and 79% vs 88% of male students respectively.

  9. Malignant lymphomas (including myeloproliferative disorders)

    International Nuclear Information System (INIS)

    Todd, I.D.H.

    1985-01-01

    This chapter deals with the radiotherapy and cytotoxic chemotherapy of the malignant lymphomas. Included within this group are Hodgkin's disease, non-Hodgkin's lymphoma, mycosis fungoides, and chronic lymphatic leukaemia. A further section deals with the myeloproliferative disorders, including granulocytic leukaemia, polycythaemia vera, and primary thrombocythaemia. Excluded are myeloma and reticulum cell sarcoma of bone and acute leukaemia. With regard to Hodgkin's disease, the past 25 years have seen general recognition of the curative potential of radiotherapy, at least in the local stages, and, more recently, awareness of the ability to achieve long-term survival after combination chemotherapy in generalised or in recurrent disease. At the same time the importance of staging has become appreciated and the introduction of procedures such as lymphography, staging laparotomy, and computer tomography (CT) has enormously increased its reliability. Advances have not been so dramatic in the complex group of non-Hodgkins's lymphomas, but are still very real

  10. Thermally activated, single component epoxy systems

    KAUST Repository

    Unruh, David A.

    2011-08-23

    A single component epoxy system in which the resin and hardener components found in many two-component epoxies are combined onto the same molecule is described. The single molecule precursor to the epoxy resin contains both multiple epoxide moieties and a diamine held latent by thermally degradable carbamate linkages. These bis-carbamate "single molecule epoxies" have an essentially infinite shelf life and access a significant range in curing temperatures related to the structure of the carbamate linkages used. © 2011 American Chemical Society.

  11. Generalized internal multiple imaging

    KAUST Repository

    Zuberi, M. A. H.

    2014-08-05

    Internal multiples deteriorate the image when the imaging procedure assumes only single scattering, especially if the velocity model does not have sharp contrasts to reproduce such scattering in the Green’s function through forward modeling. If properly imaged, internal multiples (internally scattered energy) can enhance the seismic image. Conventionally, to image internal multiples, accurate, sharp contrasts in the velocity model are required to construct a Green’s function with all the scattered energy. As an alternative, we have developed a generalized internal multiple imaging procedure that images any order internal scattering using the background Green’s function (from the surface to each image point), constructed from a smooth velocity model, usually used for conventional imaging. For the first-order internal multiples, the approach consisted of three steps, in which we first back propagated the recorded surface seismic data using the background Green’s function, then crosscorrelated the back-propagated data with the recorded data, and finally crosscorrelated the result with the original background Green’s function. This procedure images the contribution of the recorded first-order internal multiples, and it is almost free of the single-scattering recorded energy. The cost includes one additional crosscorrelation over the conventional single-scattering imaging application. We generalized this method to image internal multiples of any order separately. The resulting images can be added to the conventional single-scattering image, obtained, e.g., from Kirchhoff or reverse-time migration, to enhance the image. Application to synthetic data with reflectors illuminated by multiple scattering (double scattering) demonstrated the effectiveness of the approach.

  12. Multiple sclerosis

    DEFF Research Database (Denmark)

    Stenager, E; Knudsen, L; Jensen, K

    1994-01-01

    a significant correlation between results of an attention and perceptual motor speed test i.e. Symbol Digit Modalities test and the ability to read TV-subtitles, but no correlation was found with another attention and perceptual motor speed test, or verbal or visual memory. No correlation between the use......In a cross-sectional study of 94 patients (42 males, 52 females) with definite multiple sclerosis (MS) in the age range 25-55 years, the correlation of neuropsychological tests with the ability to read TV-subtitles and with the use of sedatives is examined. A logistic regression analysis reveals...... of sedatives and results on neuropsychological tests was found. Anxiety was not correlated with the ability to read TV-subtitles. It is concluded that visual deficits but not the use of sedatives may be a confounding factor in neuropsychological testing in MS....

  13. Towards Cognitive Component Analysis

    DEFF Research Database (Denmark)

    Hansen, Lars Kai; Ahrendt, Peter; Larsen, Jan

    2005-01-01

    Cognitive component analysis (COCA) is here defined as the process of unsupervised grouping of data such that the ensuing group structure is well-aligned with that resulting from human cognitive activity. We have earlier demonstrated that independent components analysis is relevant for representi...

  14. Repair process and a repaired component

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, III, Herbert Chidsey; Simpson, Stanley F.

    2018-02-20

    Matrix composite component repair processes are disclosed. The matrix composite repair process includes applying a repair material to a matrix composite component, securing the repair material to the matrix composite component with an external securing mechanism and curing the repair material to bond the repair material to the matrix composite component during the securing by the external securing mechanism. The matrix composite component is selected from the group consisting of a ceramic matrix composite, a polymer matrix composite, and a metal matrix composite. In another embodiment, the repair process includes applying a partially-cured repair material to a matrix composite component, and curing the repair material to bond the repair material to the matrix composite component, an external securing mechanism securing the repair material throughout a curing period, In another embodiment, the external securing mechanism is consumed or decomposed during the repair process.

  15. Improving weather predictability by including land-surface model parameter uncertainty

    Science.gov (United States)

    Orth, Rene; Dutra, Emanuel; Pappenberger, Florian

    2016-04-01

    The land surface forms an important component of Earth system models and interacts nonlinearly with other parts such as ocean and atmosphere. To capture the complex and heterogenous hydrology of the land surface, land surface models include a large number of parameters impacting the coupling to other components of the Earth system model. Focusing on ECMWF's land-surface model HTESSEL we present in this study a comprehensive parameter sensitivity evaluation using multiple observational datasets in Europe. We select 6 poorly constrained effective parameters (surface runoff effective depth, skin conductivity, minimum stomatal resistance, maximum interception, soil moisture stress function shape, total soil depth) and explore their sensitivity to model outputs such as soil moisture, evapotranspiration and runoff using uncoupled simulations and coupled seasonal forecasts. Additionally we investigate the possibility to construct ensembles from the multiple land surface parameters. In the uncoupled runs we find that minimum stomatal resistance and total soil depth have the most influence on model performance. Forecast skill scores are moreover sensitive to the same parameters as HTESSEL performance in the uncoupled analysis. We demonstrate the robustness of our findings by comparing multiple best performing parameter sets and multiple randomly chosen parameter sets. We find better temperature and precipitation forecast skill with the best-performing parameter perturbations demonstrating representativeness of model performance across uncoupled (and hence less computationally demanding) and coupled settings. Finally, we construct ensemble forecasts from ensemble members derived with different best-performing parameterizations of HTESSEL. This incorporation of parameter uncertainty in the ensemble generation yields an increase in forecast skill, even beyond the skill of the default system. Orth, R., E. Dutra, and F. Pappenberger, 2016: Improving weather predictability by

  16. Mechanical design of machine components

    CERN Document Server

    Ugural, Ansel C

    2015-01-01

    Mechanical Design of Machine Components, Second Edition strikes a balance between theory and application, and prepares students for more advanced study or professional practice. It outlines the basic concepts in the design and analysis of machine elements using traditional methods, based on the principles of mechanics of materials. The text combines the theory needed to gain insight into mechanics with numerical methods in design. It presents real-world engineering applications, and reveals the link between basic mechanics and the specific design of machine components and machines. Divided into three parts, this revised text presents basic background topics, deals with failure prevention in a variety of machine elements and covers applications in design of machine components as well as entire machines. Optional sections treating special and advanced topics are also included.Key Features of the Second Edition:Incorporates material that has been completely updated with new chapters, problems, practical examples...

  17. 76 FR 68785 - Certain Communications Equipment, Components Thereof, and Products Containing the Same, Including...

    Science.gov (United States)

    2011-11-07

    ... and Extreme Networks, Inc. of Santa Clara, CA. The complainant, proposed respondents, other interested... production of like or directly competitive articles in the United States, or United States consumers. In particular, the Commission is interested in comments that: (i) Explain how the articles potentially subject...

  18. 77 FR 37067 - Certain Liquid Crystal Display Devices, Including Monitors, Televisions, Modules, and Components...

    Science.gov (United States)

    2012-06-20

    ... view of the ViewFrame II+2 prior art. FOR FURTHER INFORMATION CONTACT: Jia Chen, Office of the General Counsel, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436, telephone (202) 708... Secretary, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436, telephone (202) 205...

  19. 78 FR 32689 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-05-31

    ... INTERNATIONAL TRADE COMMISSION [Docket No 2958] Certain Portable Electronic Communications Devices... Relating to the Public Interest AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that the U.S. International Trade Commission has received a complaint entitled...

  20. 78 FR 38361 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-06-26

    ... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-885] Certain Portable Electronic Communications... States Code AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that a complaint was filed with the U.S. International Trade Commission on May 23, 2013, under section...

  1. Physical characterization of component particles included in dry powder inhalers. I. Strategy review and static characteristics.

    Science.gov (United States)

    Hickey, Anthony J; Mansour, Heidi M; Telko, Martin J; Xu, Zhen; Smyth, Hugh D C; Mulder, Tako; McLean, Richard; Langridge, John; Papadopoulos, Dimitris

    2007-05-01

    The performance of dry powder aerosols for the delivery of drugs to the lungs has been studied extensively in the last decade. The focus for different research groups has been on aspects of the powder formulation, which relate to solid state, surface and interfacial chemistry, bulk properties (static and dynamic) and measures of performance. The nature of studies in this field, tend to be complex and correlations between specific properties and performance seem to be rare. Consequently, the adoption of formulation approaches that on a predictive basis lead to desirable performance has been an elusive goal but one that many agree is worth striving towards. The purpose of this paper is to initiate a discussion of the use of a variety of techniques to elucidate dry particle behavior that might guide the data collection process. If the many researchers in this field can agree on this, or an alternative, guide then a database can be constructed that would allow predictive models to be developed. This is the first of two papers that discuss static and dynamic methods of characterizing dry powder inhaler formulations. (c) 2007 Wiley-Liss, Inc. and the American Pharmacists Association.

  2. 77 FR 7 - Revisions to Labeling Requirements for Blood and Blood Components, Including Source Plasma

    Science.gov (United States)

    2012-01-03

    ... the labeling requirements. To make it easier to identify comments and our responses, the word ``Comment,'' in parentheses, will appear before the description of comments, and the word ``Response,'' in... the circular of information would also address concerns regarding the shipment of positive units for...

  3. 77 FR 20048 - Certain Liquid Crystal Display Devices, Including Monitors, Televisions, Modules, and Components...

    Science.gov (United States)

    2012-04-03

    ... Corporation of Irvine, California (collectively, ``Qisda''); BenQ Corporation of Taipei, Taiwan, BenQ America... evidence of the ViewFrame II+2 LCD Panel; and (16) economic prong of the domestic industry requirement. The...

  4. Integrated shaping and finishing of polymer components

    NARCIS (Netherlands)

    Bolt, P.J.; Winands, G.J.J.; Theelen, M.J.; Hovestad, A.

    2010-01-01

    Integration of multiple functions in single components is pursued in order to manufacture at less cost smaller and smarter polymer micro devices. A method to achieve this is surface activation, i.e. fully or patterned changing of the surface properties. Examples are moulded interconnect devices with

  5. Characterization of shrubland ecosystem components as continuous fields in the northwest United States

    Science.gov (United States)

    Xian, George Z.; Homer, Collin G.; Rigge, Matthew B.; Shi, Hua; Meyer, Debbie

    2015-01-01

    Accurate and consistent estimates of shrubland ecosystem components are crucial to a better understanding of ecosystem conditions in arid and semiarid lands. An innovative approach was developed by integrating multiple sources of information to quantify shrubland components as continuous field products within the National Land Cover Database (NLCD). The approach consists of several procedures including field sample collections, high-resolution mapping of shrubland components using WorldView-2 imagery and regression tree models, Landsat 8 radiometric balancing and phenological mosaicking, medium resolution estimates of shrubland components following different climate zones using Landsat 8 phenological mosaics and regression tree models, and product validation. Fractional covers of nine shrubland components were estimated: annual herbaceous, bare ground, big sagebrush, herbaceous, litter, sagebrush, shrub, sagebrush height, and shrub height. Our study area included the footprint of six Landsat 8 scenes in the northwestern United States. Results show that most components have relatively significant correlations with validation data, have small normalized root mean square errors, and correspond well with expected ecological gradients. While some uncertainties remain with height estimates, the model formulated in this study provides a cross-validated, unbiased, and cost effective approach to quantify shrubland components at a regional scale and advances knowledge of horizontal and vertical variability of these components.

  6. Device including a contact detector

    DEFF Research Database (Denmark)

    2011-01-01

    The present invention relates to a probe for determining an electrical property of an area of a surface of a test sample, the probe is intended to be in a specific orientation relative to the test sample. The probe may comprise a supporting body defining a first surface. A plurality of cantilever...... of cantilever arms (12) contacting the surface of the test sample when performing the movement....... arms (12) may extend from the supporting body in co-planar relationship with the first surface. The plurality of cantilever arms (12) may extend substantially parallel to each other and each of the plurality of cantilever arms (12) may include an electrical conductive tip for contacting the area...

  7. Principal component regression analysis with SPSS.

    Science.gov (United States)

    Liu, R X; Kuang, J; Gong, Q; Hou, X L

    2003-06-01

    The paper introduces all indices of multicollinearity diagnoses, the basic principle of principal component regression and determination of 'best' equation method. The paper uses an example to describe how to do principal component regression analysis with SPSS 10.0: including all calculating processes of the principal component regression and all operations of linear regression, factor analysis, descriptives, compute variable and bivariate correlations procedures in SPSS 10.0. The principal component regression analysis can be used to overcome disturbance of the multicollinearity. The simplified, speeded up and accurate statistical effect is reached through the principal component regression analysis with SPSS.

  8. Multiple sclerosis and herpesvirus interaction

    Directory of Open Access Journals (Sweden)

    Guilherme Sciascia do Olival

    2013-09-01

    Full Text Available Multiple sclerosis is the most common autoimmune inflammatory demyelinating disease of the central nervous system, and its etiology is believed to have both genetic and environmental components. Several viruses have already been implicated as triggers and there are several studies that implicate members of the Herpesviridae family in the pathogenesis of MS. The most important characteristic of these viruses is that they have periods of latency and exacerbations within their biological sanctuary, the central nervous system. The Epstein-Barr, cytomegalovirus, human herpesvirus 6 and human herpesvirus 7 viruses are the members that are most studied as being possible triggers of multiple sclerosis. According to evidence in the literature, the herpesvirus family is strongly involved in the pathogenesis of this disease, but it is unlikely that they are the only component responsible for its development. There are probably multiple triggers and more studies are necessary to investigate and define these interactions.

  9. Principal component regression for crop yield estimation

    CERN Document Server

    Suryanarayana, T M V

    2016-01-01

    This book highlights the estimation of crop yield in Central Gujarat, especially with regard to the development of Multiple Regression Models and Principal Component Regression (PCR) models using climatological parameters as independent variables and crop yield as a dependent variable. It subsequently compares the multiple linear regression (MLR) and PCR results, and discusses the significance of PCR for crop yield estimation. In this context, the book also covers Principal Component Analysis (PCA), a statistical procedure used to reduce a number of correlated variables into a smaller number of uncorrelated variables called principal components (PC). This book will be helpful to the students and researchers, starting their works on climate and agriculture, mainly focussing on estimation models. The flow of chapters takes the readers in a smooth path, in understanding climate and weather and impact of climate change, and gradually proceeds towards downscaling techniques and then finally towards development of ...

  10. Explosive Components Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The 98,000 square foot Explosive Components Facility (ECF) is a state-of-the-art facility that provides a full-range of chemical, material, and performance analysis...

  11. ANTHROPOLOGICAL COMPONENT OF DESCARTES’ ONTOLOGY

    Directory of Open Access Journals (Sweden)

    Anatolii M. Malivskyi

    2014-06-01

    Full Text Available The purpose of the article is to outline and comprehend the Descartes’ theory about anthropological component of ontology as the most important part of his philosophy. The accomplishment of this purpose covers the successive solution of the following tasks: 1 review of the research literature concerning the problem of human’s presence and the individual nature of truth; 2 emphasize the ambivalence of the basic intention of his legacy; 3 justify the thesis about constitutivity of human’s presence and comprehend passions as the form of disclosure of ontology’s anthropological component. Methodology. The use of the euristic potential of phenomenology, postpositivism and postmodernism makes it possible to emphasize the multiple-layer and multiple-meaning classical philosophy works, to comprehend the limitation and scarcity of the naïve-enlightening vision of human nature and to look for a new reception of European classics that provides the overcoming of established nihilism and pessimism concerning the interpretation of human nature. Scientific novelty. It is the first time that anthropological component of Descartes’ ontology became an object of particular attention. It previously lacked attention because of following main reasons: 1 traditional underestimating of the fact of Descartes’ legacy incompleteness as an unrealized anthropological project and 2 lack of proper attention to the individual nature of truth. The premise for its constructive overcoming is the attention to ambivalence of the basic intention and the significance of ethics in the philosopher’s legacy. His texts and research literature allow confirming the constitutive nature of human’s presence and passions as the key form of disclosure of the ontology anthropological component. Conclusions. The established tradition of interpretation the Descartes’ philosophizing nature as the filiation process of impersonal knowledge loses its cogency these days. The

  12. Anthropological Component of Descartes’ Ontology

    Directory of Open Access Journals (Sweden)

    Anatolii M. Malivskyi

    2014-06-01

    Full Text Available The purpose of the article is to outline and comprehend the Descartes’ theory about anthropological component of ontology as the most important part of his philosophy. The accomplishment of this purpose covers the successive solution of the following tasks: 1 review of the research literature concerning the problem of human’s presence and the individual nature of truth; 2 emphasize the ambivalence of the basic intention of his legacy; 3 justify the thesis about constitutivity of human’s presence and comprehend passions as the form of disclosure of ontology’s anthropological component. Methodology. The use of the euristic potential of phenomenology, postpositivism and postmodernism makes it possible to emphasize the multiple-layer and multiple-meaning classical philosophy works, to comprehend the limitation and scarcity of the naïve-enlightening vision of human nature and to look for a new reception of European classics that provides the overcoming of established nihilism and pessimism concerning the interpretation of human nature. Scientific novelty. It is the first time that anthropological component of Descartes’ ontology became an object of particular attention. It previously lacked attention because of following main reasons: 1 traditional underestimating of the fact of Descartes’ legacy incompleteness as an unrealized anthropological project and 2 lack of proper attention to the individual nature of truth. The premise for its constructive overcoming is the attention to ambivalence of the basic intention and the significance of ethics in the philosopher’s legacy. His texts and research literature allow confirming the constitutive nature of human’s presence and passions as the key form of disclosure of the ontology anthropological component. Conclusions. The established tradition of interpretation the Descartes’ philosophizing nature as the filiation process of impersonal knowledge loses its cogency these days. The

  13. Multiple purpose electrical profit; Emprendimiento electrico de prestacion multiple

    Energy Technology Data Exchange (ETDEWEB)

    Assennato, H. [Electrica de Azul Ltda., Buenos Aires (Argentina)

    1986-12-31

    This paper shows the multiple purpose aspects of electrification projects in rural and isolated areas. The multiple aspects involved in the electrification process may include, over electric power supply: improvement of life quality, irrigation and rural mechanization. 4 figs., 6 tabs., 4 refs.

  14. Applications of Fast Truncated Multiplication in Cryptography

    Directory of Open Access Journals (Sweden)

    Laszlo Hars

    2006-12-01

    Full Text Available Truncated multiplications compute truncated products, contiguous subsequences of the digits of integer products. For an n-digit multiplication algorithm of time complexity O(nα, with 1<α≤2, there is a truncated multiplication algorithm, which is constant times faster when computing a short enough truncated product. Applying these fast truncated multiplications, several cryptographic long integer arithmetic algorithms are improved, including integer reciprocals, divisions, Barrett and Montgomery multiplications, 2n-digit modular multiplication on hardware for n-digit half products. For example, Montgomery multiplication is performed in 2.6 Karatsuba multiplication time.

  15. Space laser components reliability

    OpenAIRE

    Riede, Wolfgang; Schroeder, Helmut

    2015-01-01

    Space environment presents unique challenges for operation of optics and optical coatings as part of laser systems. Besides testing components and sub-systems on the component qualification level, the extended testing of complete laser systems like flight modules under acceptance level conditions is an effective way to determine the reliability and long term stability, mitigating the mission risk. Hence, optics as part of high power space laser systems have to be extensively tested in view...

  16. Refractory alloy component fabrication

    International Nuclear Information System (INIS)

    Young, W.R.

    1984-01-01

    Purpose of this report is to describe joining procedures, primarily welding techniques, which were developed to construct reliable refractory alloy components and systems for advanced space power systems. Two systems, the Nb-1Zr Brayton Cycle Heat Receiver and the T-111 Alloy Potassium Boiler Development Program, are used to illustrate typical systems and components. Particular emphasis is given to specific problems which were eliminated during the development efforts. Finally, some thoughts on application of more recent joining technology are presented. 78 figures

  17. Component fragility research program

    International Nuclear Information System (INIS)

    Tsai, N.C.; Mochizuki, G.L.; Holman, G.S.

    1989-11-01

    To demonstrate how ''high-level'' qualification test data can be used to estimate the ultimate seismic capacity of nuclear power plant equipment, we assessed in detail various electrical components tested by the Pacific Gas ampersand Electric Company for its Diablo Canyon plant. As part of our Phase I Component Fragility Research Program, we evaluated seismic fragility for five Diablo Canyon components: medium-voltage (4kV) switchgear; safeguard relay board; emergency light battery pack; potential transformer; and station battery and racks. This report discusses our Phase II fragility evaluation of a single Westinghouse Type W motor control center column, a fan cooler motor controller, and three local starters at the Diablo Canyon nuclear power plant. These components were seismically qualified by means of biaxial random motion tests on a shaker table, and the test response spectra formed the basis for the estimate of the seismic capacity of the components. The seismic capacity of each component is referenced to the zero period acceleration (ZPA) and, in our Phase II study only, to the average spectral acceleration (ASA) of the motion at its base. For the motor control center, the seismic capacity was compared to the capacity of a Westinghouse Five-Star MCC subjected to actual fragility tests by LLNL during the Phase I Component Fragility Research Program, and to generic capacities developed by the Brookhaven National Laboratory for motor control center. Except for the medium-voltage switchgear, all of the components considered in both our Phase I and Phase II evaluations were qualified in their standard commercial configurations or with only relatively minor modifications such as top bracing of cabinets. 8 refs., 67 figs., 7 tabs

  18. Impact test of components

    International Nuclear Information System (INIS)

    Borsoi, L.; Buland, P.; Labbe, P.

    1987-01-01

    Stops with gaps are currently used to support components and piping: it is simple, low cost, efficient and permits free thermal expansion. In order to keep the nonlinear nature of stops, such design is often modeled by beam elements (for the component) and nonlinear springs (for the stops). This paper deals with the validity and the limits of these models through the comparison of computational and experimental results. The experimental results come from impact laboratory tests on a simplified mockup. (orig.)

  19. Musculoskeletal ultrasound including definitions for ultrasonographic pathology

    DEFF Research Database (Denmark)

    Wakefield, RJ; Balint, PV; Szkudlarek, Marcin

    2005-01-01

    Ultrasound (US) has great potential as an outcome in rheumatoid arthritis trials for detecting bone erosions, synovitis, tendon disease, and enthesopathy. It has a number of distinct advantages over magnetic resonance imaging, including good patient tolerability and ability to scan multiple joints...... in a short period of time. However, there are scarce data regarding its validity, reproducibility, and responsiveness to change, making interpretation and comparison of studies difficult. In particular, there are limited data describing standardized scanning methodology and standardized definitions of US...... pathologies. This article presents the first report from the OMERACT ultrasound special interest group, which has compared US against the criteria of the OMERACT filter. Also proposed for the first time are consensus US definitions for common pathological lesions seen in patients with inflammatory arthritis....

  20. Component Commonality and Its Cost Implications - Increasing the Commonality of the Right Components

    DEFF Research Database (Denmark)

    Lyly-Yrjänäinen, Jouni; Suomala, Petri; Israelsen, Poul

    Component commonality (Labro 2004, Zhou & Gruppström 2004) can be defined as the use of the same version of a component across multiple products. It is usually seen as a means to manage costs without sacrificing product variety. However, when managing costs with component commonality, the managers...... should be able to identify rather rapidly which group of components would enable the most significant cost reductions. Unfortunately, the existing literature lacks profound discussion of how to identify the right components for increased component commonality. The objective of the paper is to discuss how...... constructions was identified as the most important bottleneck for the delivery process causing many indirect costs, especially with respect to project-management-related activities. Interestingly, by eliminating the need for mechanical engineering, the context starts to approach assembly-to-order context, also...

  1. Multiple sclerosis and organic solvents

    DEFF Research Database (Denmark)

    Mortensen, J T; Brønnum-Hansen, Henrik; Rasmussen, K

    1998-01-01

    We investigated a possible causal relation between exposure to organic solvents in Danish workers (housepainters, typographers/printers, carpenters/cabinetmakers) and onset of multiple sclerosis. Data on men included in the Danish Multiple Sclerosis Register (3,241 men) were linked with data from...

  2. Component framework support for developing device drivers

    OpenAIRE

    Michiels, Sam; Kenens, Peter; Matthijs, Frank; Walravens, Dirk; Berbers, Yolande; Verbaeten, Pierre

    2000-01-01

    In this paper, we advocate the use of component framework technology for developing state-of-the-art system software. Relevant contributions of DiPS (Distrinet Protocol Stack), a component framework, include its anonymous interaction model, connectors for handling non-functional issues such as the concurrency model, and builder support. DiPS has effectively been used in industrial protocol stacks. This paper shows how we are using the DiPS component framework to build and support flexib...

  3. Multiscale principal component analysis

    International Nuclear Information System (INIS)

    Akinduko, A A; Gorban, A N

    2014-01-01

    Principal component analysis (PCA) is an important tool in exploring data. The conventional approach to PCA leads to a solution which favours the structures with large variances. This is sensitive to outliers and could obfuscate interesting underlying structures. One of the equivalent definitions of PCA is that it seeks the subspaces that maximize the sum of squared pairwise distances between data projections. This definition opens up more flexibility in the analysis of principal components which is useful in enhancing PCA. In this paper we introduce scales into PCA by maximizing only the sum of pairwise distances between projections for pairs of datapoints with distances within a chosen interval of values [l,u]. The resulting principal component decompositions in Multiscale PCA depend on point (l,u) on the plane and for each point we define projectors onto principal components. Cluster analysis of these projectors reveals the structures in the data at various scales. Each structure is described by the eigenvectors at the medoid point of the cluster which represent the structure. We also use the distortion of projections as a criterion for choosing an appropriate scale especially for data with outliers. This method was tested on both artificial distribution of data and real data. For data with multiscale structures, the method was able to reveal the different structures of the data and also to reduce the effect of outliers in the principal component analysis

  4. Vaccination of stage III/IV melanoma patients with long NY-ESO-1 peptide and CpG-B elicits robust CD8+and CD4+T-cell responses with multiple specificities including a novel DR7-restricted epitope.

    Science.gov (United States)

    Baumgaertner, P; Costa Nunes, C; Cachot, A; Maby-El Hajjami, H; Cagnon, L; Braun, M; Derré, L; Rivals, J-P; Rimoldi, D; Gnjatic, S; Abed Maillard, S; Marcos Mondéjar, P; Protti, M P; Romano, E; Michielin, O; Romero, P; Speiser, D E; Jandus, C

    2016-01-01

    Long synthetic peptides and CpG-containing oligodeoxynucleotides are promising components for cancer vaccines. In this phase I trial, 19 patients received a mean of 8 (range 1-12) monthly vaccines s.c. composed of the long synthetic NY-ESO-1 79-108 peptide and CpG-B (PF-3512676), emulsified in Montanide ISA-51. In 18/18 evaluable patients, vaccination induced antigen-specific CD8 + and CD4 + T-cell and antibody responses, starting early after initiation of immunotherapy and lasting at least one year. The T-cells responded antigen-specifically, with strong secretion of IFNγ and TNFα, irrespective of patients' HLAs. The most immunogenic regions of the vaccine peptide were NY-ESO-1 89-102 for CD8 + and NY-ESO-1 83-99 for CD4 + T-cells. We discovered a novel and highly immunogenic epitope (HLA-DR7/NY-ESO-1 87-99 ); 7/7 HLA-DR7 + patients generated strong CD4 + T-cell responses, as detected directly ex vivo with fluorescent multimers. Thus, vaccination with the long synthetic NY-ESO-1 79-108 peptide combined with the strong immune adjuvant CpG-B induced integrated, robust and functional CD8 + and CD4 + T-cell responses in melanoma patients, supporting the further development of this immunotherapeutic approach.

  5. Fabrication of plastic microfluidic components

    Science.gov (United States)

    Martin, Peter M.; Matson, Dean W.; Bennett, Wendy D.; Hammerstrom, D. J.

    1998-09-01

    Plastic components have many advantages, including ease of fabrication, low cost, chemical inertness, lightweight, and disposability. We report on the fabrication of three plastics-based microfluidic components: a motherboard, a dialysis unit, and a metal sensor. Microchannels, headers, and interconnects were produced in thin sheets (>=50 microns) of polyimide, PMMA, polyethylene, and polycarbonate using a direct-write excimer laser micromachining system. Machined sheets were laminated by thermal and adhesive bonding to form leak-tight microfluidic components. The microfluidic motherboard borrowed the `functionality on a chip' concept from the electronics industry and was the heart of a complex microfluidic analytical device. The motherboard platform was designed to be tightly integrated and self-contained (i.e., liquid flows are all confined within machined microchannels), reducing the need for tubing with fluid distribution and connectivity. This concept greatly facilitated system integration and miniaturization. As fabricated, the motherboard consisted of three fluid reservoirs connected to micropumps by microchannels. The fluids could either be pumped independently or mixed in microchannels prior to being directed to exterior analytical components via outlet ports. The microdialysis device was intended to separate electrolytic solutes from low volume samples prior to mass spectrometric analysis. The device consisted of a dialysis membrane laminated between opposed serpentine microchannels containing the sample fluid and a buffer solution. The laminated metal sensor consisted of fluid reservoirs, micro-flow channels, micropumps, mixing channels, reaction channels, and detector circuitry.

  6. Fuzzy-like multiple objective multistage decision making

    CERN Document Server

    Xu, Jiuping

    2014-01-01

    Decision has inspired reflection of many thinkers since the ancient times. With the rapid development of science and society, appropriate dynamic decision making has been playing an increasingly important role in many areas of human activity including engineering, management, economy and others. In most real-world problems, decision makers usually have to make decisions sequentially at different points in time and space, at different levels for a component or a system, while facing multiple and conflicting objectives and a hybrid uncertain environment where fuzziness and randomness co-exist in a decision making process. This leads to the development of fuzzy-like multiple objective multistage decision making. This book provides a thorough understanding of the concepts of dynamic optimization from a modern perspective and presents the state-of-the-art methodology for modeling, analyzing and solving the most typical multiple objective multistage decision making practical application problems under fuzzy-like un...

  7. Cognitive Component Analysis

    DEFF Research Database (Denmark)

    Feng, Ling

    2008-01-01

    of audio contexts along with pattern recognition methods to map components to known contexts. It also involves looking for the right representations for auditory inputs, i.e. the data analytic processing pipelines invoked by human brains. The main ideas refer to Cognitive Component Analysis, defined......This dissertation concerns the investigation of the consistency of statistical regularities in a signaling ecology and human cognition, while inferring appropriate actions for a speech-based perceptual task. It is based on unsupervised Independent Component Analysis providing a rich spectrum...... as the process of unsupervised grouping of generic data such that the ensuing group structure is well-aligned with that resulting from human cognitive activity. Its hypothesis runs ecologically: features which are essentially independent in a context defined ensemble, can be efficiently coded as sparse...

  8. A novel approach to analyzing fMRI and SNP data via parallel independent component analysis

    Science.gov (United States)

    Liu, Jingyu; Pearlson, Godfrey; Calhoun, Vince; Windemuth, Andreas

    2007-03-01

    There is current interest in understanding genetic influences on brain function in both the healthy and the disordered brain. Parallel independent component analysis, a new method for analyzing multimodal data, is proposed in this paper and applied to functional magnetic resonance imaging (fMRI) and a single nucleotide polymorphism (SNP) array. The method aims to identify the independent components of each modality and the relationship between the two modalities. We analyzed 92 participants, including 29 schizophrenia (SZ) patients, 13 unaffected SZ relatives, and 50 healthy controls. We found a correlation of 0.79 between one fMRI component and one SNP component. The fMRI component consists of activations in cingulate gyrus, multiple frontal gyri, and superior temporal gyrus. The related SNP component is contributed to significantly by 9 SNPs located in sets of genes, including those coding for apolipoprotein A-I, and C-III, malate dehydrogenase 1 and the gamma-aminobutyric acid alpha-2 receptor. A significant difference in the presences of this SNP component is found between the SZ group (SZ patients and their relatives) and the control group. In summary, we constructed a framework to identify the interactions between brain functional and genetic information; our findings provide new insight into understanding genetic influences on brain function in a common mental disorder.

  9. Guided Multiple Launch Rocket System/Guided Multiple Launch Rocket System Alternative Warhead (GMLRS/GMLRS AW)

    Science.gov (United States)

    2015-12-01

    Launch Rocket System/Guided Multiple Launch Rocket System Alternative... Launch Rocket System/Guided Multiple Launch Rocket System Alternative Warhead (GMLRS/GMLRS AW) DoD Component Army Responsible Office References SAR...UNCLASSIFIED 5 Mission and Description The mission of the Guided Multiple Launch Rocket System/Guided Multiple Launch Rocket System Alternative

  10. Processing and storage of blood components: strategies to improve patient safety

    Directory of Open Access Journals (Sweden)

    Pietersz RNI

    2015-08-01

    Full Text Available Ruby NI Pietersz, Pieter F van der Meer Department of Product and Process Development, Sanquin Blood Bank, Amsterdam, the Netherlands Abstract: This review focuses on safety improvements of blood processing of various blood components and their respective storage. A solid quality system to ensure safe and effective blood components that are traceable from a donor to the patient is the foundation of a safe blood supply. To stimulate and guide this process, National Health Authorities should develop guidelines for blood transfusion, including establishment of a quality system. Blood component therapy enabled treatment of patients with blood constituents that were missing, only thus preventing reactions to unnecessarily transfused elements. Leukoreduction prevents many adverse reactions and also improves the quality of the blood components during storage. The safety of red cells and platelets is improved by replacement of plasma with preservative solutions, which results in the reduction of isoantibodies and plasma proteins. Automation of blood collection, separation of whole blood into components, and consecutive processing steps, such as preparation of platelet concentrate from multiple donations, improves the consistent composition of blood components. Physicians can better prescribe the number of transfusions and therewith reduce donor exposure and/or the risk of pathogen transmission. Pathogen reduction in cellular blood components is the latest development in improving the safety of blood transfusions for patients. Keywords: blood components, red cell concentrates, platelet concentrates, plasma, transfusion, safety 

  11. Aging memories: differential decay of episodic memory components.

    Science.gov (United States)

    Talamini, Lucia M; Gorree, Eva

    2012-05-17

    Some memories about events can persist for decades, even a lifetime. However, recent memories incorporate rich sensory information, including knowledge on the spatial and temporal ordering of event features, while old memories typically lack this "filmic" quality. We suggest that this apparent change in the nature of memories may reflect a preferential loss of hippocampus-dependent, configurational information over more cortically based memory components, including memory for individual objects. The current study systematically tests this hypothesis, using a new paradigm that allows the contemporaneous assessment of memory for objects, object pairings, and object-position conjunctions. Retention of each memory component was tested, at multiple intervals, up to 3 mo following encoding. The three memory subtasks adopted the same retrieval paradigm and were matched for initial difficulty. Results show differential decay of the tested episodic memory components, whereby memory for configurational aspects of a scene (objects' co-occurrence and object position) decays faster than memory for featured objects. Interestingly, memory requiring a visually detailed object representation decays at a similar rate as global object recognition, arguing against interpretations based on task difficulty and against the notion that (visual) detail is forgotten preferentially. These findings show that memories undergo qualitative changes as they age. More specifically, event memories become less configurational over time, preferentially losing some of the higher order associations that are dependent on the hippocampus for initial fast encoding. Implications for theories of long-term memory are discussed.

  12. Electronic components and systems

    CERN Document Server

    Dennis, W H

    2013-01-01

    Electronic Components and Systems focuses on the principles and processes in the field of electronics and the integrated circuit. Covered in the book are basic aspects and physical fundamentals; different types of materials involved in the field; and passive and active electronic components such as capacitors, inductors, diodes, and transistors. Also covered in the book are topics such as the fabrication of semiconductors and integrated circuits; analog circuitry; digital logic technology; and microprocessors. The monograph is recommended for beginning electrical engineers who would like to kn

  13. Component Reengineering Workshops

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Christensen, Henrik Bærbak

    2004-01-01

    In mature domains, a number of competing product lines may emerge, and from the point of view of customers of such product lines, reengineering and reuse of assets across product lines from different vendors becomes important. To address this issue we present a low-cost approach, component...... reengineering workshops, for assessing reengineering costs of reusing components between different product lines. The approach works on the level of software architectures, and relies critically on input from various (technical) stakeholders. It has been validated through case studies that are also presented...

  14. Flexible optical network components based on densely integrated microring resonators

    NARCIS (Netherlands)

    Geuzebroek, D.H.

    2005-01-01

    This thesis addresses the design, realization and characterization of reconfigurable optical network components based on multiple microring resonators. Since thermally tunable microring resonators can be used as wavelength selective space switches, very compact devices with high complexity and

  15. A modified principal component analysis-based utility theory ...

    African Journals Online (AJOL)

    traditional machining processes having multiple performance characteristics, some of which are usually correlated. So, ideally, use of principal component analysis (PCA)-based approaches that take into account the possible correlations ...

  16. Trends in chassis and automobile electronics components

    Energy Technology Data Exchange (ETDEWEB)

    Hackenberg, Ulrich [Volkswagen AG, Wolfsburg (Germany)

    2008-07-01

    The rapidly-growing importance of electronics in automobile construction is in part determined by the debate on sustainability and the clear trend towards electric power trains. Another factor, however, is the decisive impact of electronics on the further development of components, e.g. for chassis. Apart from environmental protection, key motivators for component development include comfort, safety, infotainment and driver assistance. (orig.)

  17. Optimisation of multiple isocentre stereotactic radiosurgery planning

    International Nuclear Information System (INIS)

    Roxby, Paul; Ungureanu, Elena; Haworth, Annette; Gavriliouk, Olena

    2011-01-01

    Full text: Finding a good treatment plan for multiple isocentre stereotactic radiosurgery (SRS) is challenging. Trial and error is too slow even for a computer when more than three isocentres are used. We present a new method which includes an optimization component and works for irregular volumes. The unequal sphere packing problem (USPP) is a well defined mathematical problem with published solutions (algorithms) for filling a convex volume with spheres of variable size. We present an algorithm for non-convex volumes, such as typical SRS targets, using mixed integer programming and linearization of constraints. Available collimator sizes are represented as spheres whose radius equals their 90% isodose. Non-overlapping spheres must lie within the target volume. One formulation maximises the fraction of the target volume covered by the spheres for a given number of isocentres (USPPmax). An alternative formulation minimises the number of isocentres required to achieve a certain packing density (USPPmin). The method was applied retrospectively to 18 recent clinical cases. Results Using USPPmin a solution was achieved in a few seconds in 14 of 18 random clinical cases. Two of the remaining four cases could be computed in under 4 min when a limit of five spheres was introduced. Low values of packing density with the maximum realistic number of isocentres indicated that a multiple isocentre approach was infeasible. Conclusions The algorithm gives the location of each isocentre and the collimator diameter to achieve an optimal multiple isocentre treatment plan. It provides a useful tool for plan design and evaluation.

  18. MPACT Fast Neutron Multiplicity System Prototype Development

    Energy Technology Data Exchange (ETDEWEB)

    D.L. Chichester; S.A. Pozzi; J.L. Dolan; M.T. Kinlaw; S.J. Thompson; A.C. Kaplan; M. Flaska; A. Enqvist; J.T. Johnson; S.M. Watson

    2013-09-01

    This document serves as both an FY2103 End-of-Year and End-of-Project report on efforts that resulted in the design of a prototype fast neutron multiplicity counter leveraged upon the findings of previous project efforts. The prototype design includes 32 liquid scintillator detectors with cubic volumes 7.62 cm in dimension configured into 4 stacked rings of 8 detectors. Detector signal collection for the system is handled with a pair of Struck Innovative Systeme 16-channel digitizers controlled by in-house developed software with built-in multiplicity analysis algorithms. Initial testing and familiarization of the currently obtained prototype components is underway, however full prototype construction is required for further optimization. Monte Carlo models of the prototype system were performed to estimate die-away and efficiency values. Analysis of these models resulted in the development of a software package capable of determining the effects of nearest-neighbor rejection methods for elimination of detector cross talk. A parameter study was performed using previously developed analytical methods for the estimation of assay mass variance for use as a figure-of-merit for system performance. A software package was developed to automate these calculations and ensure accuracy. The results of the parameter study show that the prototype fast neutron multiplicity counter design is very nearly optimized under the restraints of the parameter space.

  19. Thalidomide in patients with advanced multiple myeloma.

    Science.gov (United States)

    Yakoub-Agha, I; Moreau, P; Leyvraz, S; Berthou, C; Payen, C; Dumontet, C; Grosbois, B; Beris, P; Duguet, C; Attal, M; Harousseau, J L; Facon, T

    2000-01-01

    Recently, a report has suggested the efficacy and safety of thalidomide in refractory multiple myeloma. In an attempt to assess the efficacy and tolerance of thalidomide in advanced multiple myeloma (on behalf of the Intergroupe Franchophone dy Myelome (IFM)), we report the preliminary experience of the IFM with this drug. Patients with advanced multiple myeloma (n=27) were treated with an oral dose of thalidomide (median 400 mg/day). At the start of treatment, all patients had active disease and 20 patients had received at least one autologous transplantation. Median follow-up was 105 days from the first administration. The serum and/or urine levels of the M-component were reduced by at least 75% in four patients including one patient with a >90% reduction, by at least 50% in five patients and by at least 25% in three patients, giving a total response rate of 45% (12 out of 27 patients). Nine patients had stable disease and six patients had progressed disease. Short-term side-effects of thalidomide were generally moderate. This study confirms that thalidomide is an effective agent in patients with advanced myeloma.

  20. Hearing disorders in multiple sclerosis.

    Science.gov (United States)

    Furst, Miriam; Levine, Robert A

    2015-01-01

    Multiple sclerosis (MS) is a disease that is both a focal inflammatory and a chronic neurodegenerative disease. The focal inflammatory component is characterized by destruction of central nervous system myelin, including the spinal cord; as such it can impair any central neural system, including the auditory system. While on the one hand auditory complaints in MS patients are rare compared to other senses, such as vision and proprioception, on the other hand auditory tests of precise neural timing are never "silent." Whenever focal MS lesions are detected involving the pontine auditory pathway, auditory tests requiring precise neural timing are always abnormal, while auditory functions not requiring such precise timing are often normal. Azimuth sound localization is accomplished by comparing the timing and loudness of the sound at the two ears. Hence tests of azimuth sound localization must obligatorily involve the central nervous system and particularly the brainstem. Whenever a focal lesion was localized to the pontine auditory pathway, timing tests were always abnormal, but loudness tests were not. Moreover, a timing test that included only high-frequency sounds was very often abnormal, even when there was no detectable focal MS lesion involving the pontine auditory pathway. This test may be a marker for the chronic neurodegenerative aspect of MS, and, as such could be used to complement the magnetic resonance imaging scan in monitoring the neurodegenerative aspect of MS. Studies of MS brainstem lesion location and auditory function have led to advances in understanding how the human brain processes sound. The brain processes binaural sounds independently for time and level in a two-stage process. The first stage is at the level of the superior olivary complex (SOC) and the second at a level rostral to the SOC. © 2015 Elsevier B.V. All rights reserved.

  1. Vaccines in Multiple Sclerosis.

    Science.gov (United States)

    Williamson, Eric M L; Chahin, Salim; Berger, Joseph R

    2016-04-01

    Vaccinations help prevent communicable disease. To be valuable, a vaccine's ability to prevent disease must exceed the risk of adverse effects from administration. Many vaccines present no risk of infection as they are comprised of killed or non-infectious components while other vaccines consist of live attenuated microorganisms which carry a potential risk of infection-particularly, in patients with compromised immunity. There are several unique considerations with respect to vaccination in the multiple sclerosis (MS) population. First, there has been concern that vaccination may trigger or aggravate the disease. Second, disease-modifying therapies (DMTs) employed in the treatment of MS may increase the risk of infectious complications from vaccines or alter their efficacy. Lastly, in some cases, vaccination strategies may be part of the treatment paradigm in attempts to avoid complications of therapy.

  2. [Delivery in multiple pregnancies].

    Science.gov (United States)

    Colla, F; D'Addato, F; Grio, R

    2001-04-01

    A knowledge of clinical physiognomy in pathologies related to multiple births is indispensable for improving maternal and feto-neonatal prognosis. This study is a contribution to the solution of this problem. A meta-analysis of data for multiple births at Department B of the Gynecology and Obstetrics Clinic at the University of Turi during the decade 1989-1998 was carried out, focusing on the arrangement and presentation of fetuses, the various types of birth, the gestational age at which birth occurred, the weight of neonates, neonatal mortality and maternal morbidity. Out of 11,523 births, there were a total of 194 (1.68%) multiple births, including 190 sets of twins and 4 triplets. 154 (79.38%) premature births were reported; 20 occurred 1500 g). The perinatal mortality rate was 3.82%. Maternal complications mainly occurred during the placental state, in the immediate postpartum and in puerperio. The authors feel that a more careful medical and social assistance, preventive hospitalisation, early recognition of the risk, constant monitoring for the optimal timing of birth, and lastly, qualified medical assistance during labour (expert gynecologist, trained obstetric staff) with other medical personnel (anesthetist, neonatal specialist) represent winning strategies to solve the problems arising during multiple pregnancies.

  3. Spain's nuclear components industry

    International Nuclear Information System (INIS)

    Kaibel, E.

    1985-01-01

    Spanish industrial participation in supply of components for nuclear power plants has grown steadily over the last fifteen years. The share of Spanish companies in work for the five second generation nuclear power plants increased to 50% of total capital investments. The necessity to maintain Spanish technology and production in the nuclear field is emphasized

  4. Component-oriented programming

    NARCIS (Netherlands)

    Bosch, J; Szyperski, C; Weck, W; Buschmann, F; Buchmann, AP; Cilia, MA

    2003-01-01

    This report covers the eighth Workshop on Component-Oriented Programming (WCOP). WCOP has been affiliated with ECOOP since its inception in 1996. The report summarizes the contributions made by authors of accepted position papers as well as those made by all attendees of the workshop sessions.

  5. Grey component analysis

    NARCIS (Netherlands)

    Westerhuis, J.A.; Derks, E.P.P.A.; Hoefsloot, H.C.J.; Smilde, A.K.

    2007-01-01

    The interpretation of principal component analysis (PCA) models of complex biological or chemical data can be cumbersome because in PCA the decomposition is performed without any knowledge of the system at hand. Prior information of the system is not used to improve the interpretation. In this paper

  6. Molecular Models Candy Components

    Science.gov (United States)

    Coleman, William F.

    2007-01-01

    An explanation of various principles of chemistry in a paper by Fanny Ennever by the use of candy is described. The paper explains components of sucrose and the invert sugar that results from the hydrolysis of sucrose and will help students in determining whether the products are indeed hydrates of carbon.

  7. Component lifetime modelling

    NARCIS (Netherlands)

    Verweij, J.F.; Verweij, J.F.; Brombacher, A.C.; Brombacher, A.C.; Lunenborg, M.M.; Lunenborg, M.M.

    1994-01-01

    There are two approaches to component lifetime modelling. The first one uses a reliability prediction method as described in the (military) handbooks with the appropriate models and parameters. The advantages are: (a) It takes into account all possible failure mechanisms. (b) It is easy to use. The

  8. Euler principal component analysis

    NARCIS (Netherlands)

    Liwicki, Stephan; Tzimiropoulos, Georgios; Zafeiriou, Stefanos; Pantic, Maja

    Principal Component Analysis (PCA) is perhaps the most prominent learning tool for dimensionality reduction in pattern recognition and computer vision. However, the ℓ 2-norm employed by standard PCA is not robust to outliers. In this paper, we propose a kernel PCA method for fast and robust PCA,

  9. Validating Timed Component Contracts

    DEFF Research Database (Denmark)

    Le Guilly, Thibaut; Liu, Shaoying; Olsen, Petur

    2015-01-01

    This paper presents a technique for testing software components with contracts that specify functional behavior, synchronization, as well as timing behavior. The approach combines elements from unit testing with model-based testing techniques for timed automata. The technique is implemented...... in an online testing tool, and we demonstrate its use on a concrete use case....

  10. Source / component separation with NMF and scarlet

    Science.gov (United States)

    Melchior, Peter; Moolekamp, Fred; LSST Data Management, WFIRST Preparatory Science

    2018-01-01

    Astronomical data are often superpositions of multiple source signals. I will introduce the open-source analysis framework scarlet, based on the Non-negative Matrix Factorization (NMF), that achieves efficient source separation and enables flexible constraints or priors on the shape of the signals and/or the signal amplitude across multiple observations.I will demonstrate scarlet's capabilities of separating multi-component photo-z distributions, AGN jets from host galaxies, and more generally: crowded extragalactic fields in the HSC survey. I will also discuss extensions for joint pixel-level deblending with images from LSST and WFIRST, and for hyperspectral or grism data.

  11. Utility of Independent Component Analysis for Interpretation of Intracranial EEG

    Directory of Open Access Journals (Sweden)

    Diane eWhitmer

    2010-11-01

    Full Text Available Electrode arrays are sometimes implanted in the brains of patients with intractable epilepsy to better localize seizure foci before epilepsy surgery. Analysis of intracranial EEG (iEEG recordings is typically performed in the electrode channel domain without explicit separation of the sources that generate the signals. However, intracranial EEG signals, like scalp EEG signals, could be linear mixtures of local activity and volume conducted activity arising in multiple source areas. Independent component analysis (ICA has recently been applied to scalp EEG data, and shown to separate the signal mixtures into independently generated brain and non-brain source signals. Here, we applied ICA to un-mix source signals from intracranial EEG recordings from four epilepsy patients during a visually cued finger movement task in the presence of background pathological brain activity. This ICA decomposition demonstrated that the iEEG recordings were not maximally independent, but rather are linear mixtures of activity from multiple sources. Many of the independent component (IC projections to the iEEG recording grid were consistent with sources from single brain regions, including components exhibiting classic movement-related dynamics. Notably, the largest IC projection to each channel accounted for no more than 20%-80% of the channel signal variance, implying that in general intracranial recordings cannot be accurately interpreted as recordings of independent brain sources. These results suggest that ICA can be used to identify and monitor major field sources of local and distributed functional networks generating iEEG data. ICA decomposition methods are useful for improving the fidelity of source signals of interest, likely including distinguishing the sources of pathological brain activity.

  12. Nuclear power plant component protection

    International Nuclear Information System (INIS)

    Michel, E.; Ruf, R.; Dorner, H.

    1976-01-01

    Described is a nuclear power plant installation which includes a concrete biological shield forming a pit in which a reactor pressure vessel is positioned. A steam generator on the outside of the shield is connected with the pressure vessel via coolant pipe lines which extend through the shield, the coolant circulation being provided by a coolant pump which is also on the outside of the shield. To protect these components on the outside of the shield and which are of mainly or substantially cylindrical shape, semicylindrical concrete segments are interfitted around them to form complete outer cylinders which are retained against outward separation radially from the components, by rings of high tensile steel which may be interspaced so closely that they provide, in effect, an outer steel cylinder. The invention is particularly applicable to pressurized-water coolant reactor installations

  13. Cylinder components properties, applications, materials

    CERN Document Server

    2016-01-01

    Owing to the ever-increasing requirements to be met by gasoline and diesel engines in terms of CO2 reduction, emission behavior, weight, and service life, a comprehensive understanding of combustion engine components is essential today. It is no longer possible for professionals in automotive engineering to manage without the corresponding expertise, whether they work in the field of design, development, testing, or maintenance. This technical book provides in-depth answers to questions about design, production, and machining of cylinder components. In this second edition, every section has been revised and expanded to include the latest developments in the combustion engine. Content Piston rings Piston pins and piston pin circlips Bearings Connecting rods Crankcase and cylinder liners Target audience Engineers in the field of engine development and maintenanceLecturers and students in the areas of mechanical engineering, engine technology, and vehicle constructionAnyone interested in technology Publisher MAH...

  14. Joining porous components to solid metal structures

    Science.gov (United States)

    Fortini, A.; Tulisiak, G.

    1972-01-01

    Process for joining porous metal material to solid metal structure without cracking or blockage of porous component is described. Procedures of electron beam welding and electroforming are discussed. Illustration of microstructure resulting from process is included.

  15. Generalized principal component analysis

    CERN Document Server

    Vidal, René; Sastry, S S

    2016-01-01

    This book provides a comprehensive introduction to the latest advances in the mathematical theory and computational tools for modeling high-dimensional data drawn from one or multiple low-dimensional subspaces (or manifolds) and potentially corrupted by noise, gross errors, or outliers. This challenging task requires the development of new algebraic, geometric, statistical, and computational methods for efficient and robust estimation and segmentation of one or multiple subspaces. The book also presents interesting real-world applications of these new methods in image processing, image and video segmentation, face recognition and clustering, and hybrid system identification etc. This book is intended to serve as a textbook for graduate students and beginning researchers in data science, machine learning, computer vision, image and signal processing, and systems theory. It contains ample illustrations, examples, and exercises and is made largely self-contained with three Appendices which survey basic concepts ...

  16. Estimation of symmetrical components and their orthogonal components under unknown frequencies and unknown biases

    Science.gov (United States)

    Chu, Zhaobi; Zhang, Rui; Chen, Bo; Li, Hua

    2017-07-01

    An algorithm to estimate symmetrical components, orthogonal components and amplitudes of each sinusoidal component in three-phase power system signal under unknown frequencies and unknown biases is presented. The algorithm consists of a signal transformation, a biased adaptive orthogonal decomposition (BAOD) and a symmetrical component estimation. The BAOD can be regarded as a combination of a low pass filter and a number of three-phase frequency estimators in parallel. The symmetrical component estimation employs addition and multiplication rather than operations of trigonometry, division and phase shift. The decomposition property and the convergence property were investigated by Lyapunov theorem, integral manifold of slow adaptation and average method. Two design parameters, bandwidth parameter and frequency adaptive gains, give different effects on the convergence property of frequency adaptation and amplitude estimation independently. Simulation results demonstrate the performance of the method.

  17. Hot gas path component cooling system

    Science.gov (United States)

    Lacy, Benjamin Paul; Bunker, Ronald Scott; Itzel, Gary Michael

    2014-02-18

    A cooling system for a hot gas path component is disclosed. The cooling system may include a component layer and a cover layer. The component layer may include a first inner surface and a second outer surface. The second outer surface may define a plurality of channels. The component layer may further define a plurality of passages extending generally between the first inner surface and the second outer surface. Each of the plurality of channels may be fluidly connected to at least one of the plurality of passages. The cover layer may be situated adjacent the second outer surface of the component layer. The plurality of passages may be configured to flow a cooling medium to the plurality of channels and provide impingement cooling to the cover layer. The plurality of channels may be configured to flow cooling medium therethrough, cooling the cover layer.

  18. Bayesian Independent Component Analysis

    DEFF Research Database (Denmark)

    Winther, Ole; Petersen, Kaare Brandt

    2007-01-01

    In this paper we present an empirical Bayesian framework for independent component analysis. The framework provides estimates of the sources, the mixing matrix and the noise parameters, and is flexible with respect to choice of source prior and the number of sources and sensors. Inside the engine...... in a Matlab toolbox, is demonstrated for non-negative decompositions and compared with non-negative matrix factorization.......In this paper we present an empirical Bayesian framework for independent component analysis. The framework provides estimates of the sources, the mixing matrix and the noise parameters, and is flexible with respect to choice of source prior and the number of sources and sensors. Inside the engine...

  19. Adaptable component frameworks

    DEFF Research Database (Denmark)

    Katajainen, Jyrki; Simonsen, Bo

    2009-01-01

    for vector, which is undoubtedly the most used container of the C++ standard library. In particular, we specify the details of a vector implementation that is safe with respect to referential integrity and strong exception safety. Additionally, we report the experiences and lessons learnt from......The CPH STL is a special edition of the STL, the containers and algorithms part of the C++ standard library. The specification of the generic components of the STL is given in the C++ standard. Any implementation of the STL, e.g. the one that ships with your standard-compliant C++ compiler, should...... the development of component frameworks which we hope to be of benefit to persons engaged in the design and implementation of generic software libraries....

  20. Bacterial Cell Wall Components

    Science.gov (United States)

    Ginsberg, Cynthia; Brown, Stephanie; Walker, Suzanne

    Bacterial cell-surface polysaccharides cells are surrounded by a variety of cell-surface structures that allow them to thrive in extreme environments. Components of the cell envelope and extracellular matrix are responsible for providing the cells with structural support, mediating intercellular communication, allowing the cells to move or to adhere to surfaces, protecting the cells from attack by antibiotics or the immune system, and facilitating the uptake of nutrients. Some of the most important cell wall components are polysaccharide structures. This review discusses the occurrence, structure, function, and biosynthesis of the most prevalent bacterial cell surface polysaccharides: peptidoglycan, lipopolysaccharide, arabinogalactan, and lipoarabinomannan, and capsular and extracellular polysaccharides. The roles of these polysaccharides in medicine, both as drug targets and as therapeutic agents, are also described.

  1. Portable multiplicity counter

    Science.gov (United States)

    Newell, Matthew R [Los Alamos, NM; Jones, David Carl [Los Alamos, NM

    2009-09-01

    A portable multiplicity counter has signal input circuitry, processing circuitry and a user/computer interface disposed in a housing. The processing circuitry, which can comprise a microcontroller integrated circuit operably coupled to shift register circuitry implemented in a field programmable gate array, is configured to be operable via the user/computer interface to count input signal pluses receivable at said signal input circuitry and record time correlations thereof in a total counting mode, coincidence counting mode and/or a multiplicity counting mode. The user/computer interface can be for example an LCD display/keypad and/or a USB interface. The counter can include a battery pack for powering the counter and low/high voltage power supplies for biasing external detectors so that the counter can be configured as a hand-held device for counting neutron events.

  2. Multiple time scale dynamics

    CERN Document Server

    Kuehn, Christian

    2015-01-01

    This book provides an introduction to dynamical systems with multiple time scales. The approach it takes is to provide an overview of key areas, particularly topics that are less available in the introductory form.  The broad range of topics included makes it accessible for students and researchers new to the field to gain a quick and thorough overview. The first of its kind, this book merges a wide variety of different mathematical techniques into a more unified framework. The book is highly illustrated with many examples and exercises and an extensive bibliography. The target audience of this  book are senior undergraduates, graduate students as well as researchers interested in using the multiple time scale dynamics theory in nonlinear science, either from a theoretical or a mathematical modeling perspective. 

  3. Components of the environment

    International Nuclear Information System (INIS)

    Klinda, J.; Lieskovska, Z.

    1998-01-01

    This report of the Ministry of the Environment of the Slovak Republic deals with the components of the environment. The results of monitoring of air (emission situation), ambient air quality, atmospheric precipitation, tropospheric ozone, water (surface water, groundwater resources, waste water and drinking water), geological factors (geothermal energy, fuel deposits, ore deposits, non-metallic ore deposits), soil (area statistics, soil contamination. soil reaction and active extractable aluminium, soil erosion), flora and fauna (national strategy of biodiversity protection) are presented

  4. Surface mount component jig

    Science.gov (United States)

    Kronberg, James W.

    1990-08-07

    A device for bending and trimming the pins of a dual-inline-package component and the like for surface mounting rather than through mounting to a circuit board comprises, in a first part, in pin cutter astride a holder having a recess for holding the component, a first spring therebetween, and, in a second part, two flat members pivotally interconnected by a hinge and urged to an upward peaked position from a downward peaked position by a second spring. As a downward force is applied to the pin cutter it urges the holder downward, assisted by the first spring and a pair of ridges riding on shoulders of the holder, to carry the component against the upward peaked flat members which guide the pins outwardly. As the holder continues downwardly, the flat members pivot to the downward peaked position bending the pins upwardly against the sides of the holder. When the downward movement is met with sufficient resistance, the ridges of the pin cutter ride over the holder's shoulders to continue downward to cut any excess length of pin.

  5. Inkjet deposited circuit components

    Science.gov (United States)

    Bidoki, S. M.; Nouri, J.; Heidari, A. A.

    2010-05-01

    All-printed electronics as a means of achieving ultra-low-cost electronic circuits has attracted great interest in recent years. Inkjet printing is one of the most promising techniques by which the circuit components can be ultimately drawn (i.e. printed) onto the substrate in one step. Here, the inkjet printing technique was used to chemically deposit silver nanoparticles (10-200 nm) simply by ejection of silver nitrate and reducing solutions onto different substrates such as paper, PET plastic film and textile fabrics. The silver patterns were tested for their functionality to work as circuit components like conductor, resistor, capacitor and inductor. Different levels of conductivity were achieved simply by changing the printing sequence, inks ratio and concentration. The highest level of conductivity achieved by an office thermal inkjet printer (300 dpi) was 5.54 × 105 S m-1 on paper. Inkjet deposited capacitors could exhibit a capacitance of more than 1.5 nF (parallel plate 45 × 45 mm2) and induction coils displayed an inductance of around 400 µH (planar coil 10 cm in diameter). Comparison of electronic performance of inkjet deposited components to the performance of conventionally etched items makes the technique highly promising for fabricating different printed electronic devices.

  6. Multiple Input - Multiple Output (MIMO) SAR

    Data.gov (United States)

    National Aeronautics and Space Administration — This effort will research and implement advanced Multiple-Input Multiple-Output (MIMO) Synthetic Aperture Radar (SAR) techniques which have the potential to improve...

  7. The determination of contribution of emotional intelligence and parenting styles components to predicts positive psychological components

    Directory of Open Access Journals (Sweden)

    hosein Ebrahimi moghadam

    2015-05-01

    Full Text Available Background: Since the essential of positive psychological components, as compliment of deficiency oriented approaches, has begun in recent days,we decided to take into account this new branch of psychology which scientifically considers studying forces of human, as well as because of the importance of this branch of psychology, we also tried to search the contribution of emotional intelligence and parenting styles components to predict positive psychological components. Materials and Methods:In this cross sectional study 200 psychological students of Azad university (Rudehen branch selected using cluster sampling method. Then they were estimated by Bradbery and Grivers emotional intelligence questionnaire , Bamrind parenting styles and Rajayi et al positive psychological components questionnaire. Research data was analyzed using descriptive statistics (mean and standard deviation, inferential statistics (multiple regression and Pierson correlation coefficient and SPSS software. Results:Among the components of emotional intelligence, the component of emotional self consciousness (β=0.464 had the greatest predictable , and reaction leadership showed no predictability in this research between parenting styles , authority parenting styles had positive significance relationship with positive psychological components. And no significant relationship was found between despot parenting styles and positive psychological components. Conclusion: Regarding the results of this research and importance of positive psychological components, it is suggested to treat the emotional intelligence from childhood and to learn it to parents and remind them the parenting way to decrease the satisfaction of individuals which leads to promotion of society mental health.

  8. Description of the RDCDS Meteorological Component

    Energy Technology Data Exchange (ETDEWEB)

    Pekour, Mikhail S.; Berg, Larry K.

    2007-10-01

    This report provides a detailed description of the Rapidly Deployable Chemical Defense System (RDCDS) Meteorological Component. The Meteorological Component includes four surface meteorological stations, miniSODAR, laptop computers, and communications equipment. This report describes the equipment that is used, explains the operation of the network, and gives instructions for setting up the Component and replacing defective parts. A detailed description of operation and use of the individual sensors, including the data loggers is not covered in the current document, and the interested reader should refer to the manufacturer’s documentation.

  9. Defining Components of Team Leadership and Membership in Prehospital Emergency Medical Services.

    Science.gov (United States)

    Crowe, Remle P; Wagoner, Robert L; Rodriguez, Severo A; Bentley, Melissa A; Page, David

    2017-01-01

    Teamwork is critical for patient and provider safety in high-stakes environments, including the setting of prehospital emergency medical services (EMS). We sought to describe the components of team leadership and team membership on a single patient call where multiple EMS providers are present. We conducted a two-day focus group with nine subject matter experts in crew resource management (CRM) and EMS using a structured nominal group technique (NGT). The specific question posed to the group was, "What are the specific components of team leadership and team membership on a single patient call where multiple EMS providers are present?" After round-robin submission of ideas and in-depth discussion of the meaning of each component, participants voted on the most important components of team leadership and team membership. Through the NGT process, we identified eight components of team leadership: a) creates an action plan; b) communicates; c) receives, processes, verifies, and prioritizes information; d) reconciles incongruent information; e) demonstrates confidence, compassion, maturity, command presence, and trustworthiness; f) takes charge; g) is accountable for team actions and outcomes; and h) assesses the situation and resources and modifies the plan. The eight essential components of team membership identified included: a) demonstrates followership, b) maintains situational awareness, c) demonstrates appreciative inquiry, d) does not freelance, e) is an active listener, f) accurately performs tasks in a timely manner, g) is safety conscious and advocates for safety at all times, and h) leaves ego and rank at the door. This study used a highly structured qualitative technique and subject matter experts to identify components of teamwork essential for prehospital EMS providers. These findings and may be used to help inform the development of future EMS training and assessment initiatives.

  10. Concurrent conditional clustering of multiple networks: COCONETS.

    Directory of Open Access Journals (Sweden)

    Sabrina Kleessen

    Full Text Available The accumulation of high-throughput data from different experiments has facilitated the extraction of condition-specific networks over the same set of biological entities. Comparing and contrasting of such multiple biological networks is in the center of differential network biology, aiming at determining general and condition-specific responses captured in the network structure (i.e., included associations between the network components. We provide a novel way for comparison of multiple networks based on determining network clustering (i.e., partition into communities which is optimal across the set of networks with respect to a given cluster quality measure. To this end, we formulate the optimization-based problem of concurrent conditional clustering of multiple networks, termed COCONETS, based on the modularity. The solution to this problem is a clustering which depends on all considered networks and pinpoints their preserved substructures. We present theoretical results for special classes of networks to demonstrate the implications of conditionality captured by the COCONETS formulation. As the problem can be shown to be intractable, we extend an existing efficient greedy heuristic and applied it to determine concurrent conditional clusters on coexpression networks extracted from publically available time-resolved transcriptomics data of Escherichia coli under five stresses as well as on metabolite correlation networks from metabolomics data set from Arabidopsis thaliana exposed to eight environmental conditions. We demonstrate that the investigation of the differences between the clustering based on all networks with that obtained from a subset of networks can be used to quantify the specificity of biological responses. While a comparison of the Escherichia coli coexpression networks based on seminal properties does not pinpoint biologically relevant differences, the common network substructures extracted by COCONETS are supported by

  11. Solid State Lighting Reliability Components to Systems

    CERN Document Server

    Fan, XJ

    2013-01-01

    Solid State Lighting Reliability: Components to Systems begins with an explanation of the major benefits of solid state lighting (SSL) when compared to conventional lighting systems including but not limited to long useful lifetimes of 50,000 (or more) hours and high efficacy. When designing effective devices that take advantage of SSL capabilities the reliability of internal components (optics, drive electronics, controls, thermal design) take on critical importance. As such a detailed discussion of reliability from performance at the device level to sub components is included as well as the integrated systems of SSL modules, lamps and luminaires including various failure modes, reliability testing and reliability performance. This book also: Covers the essential reliability theories and practices for current and future development of Solid State Lighting components and systems Provides a systematic overview for not only the state-of-the-art, but also future roadmap and perspectives of Solid State Lighting r...

  12. Dynamic characterization of satellite components through non-invasive methods

    Energy Technology Data Exchange (ETDEWEB)

    Mullens, Joshua G [Los Alamos National Laboratory; Wiest, Heather K [Los Alamos National Laboratory; Mascarenas, David D [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory

    2011-01-24

    The rapid deployment of satellites is hindered by the need to flight-qualify their components and the resulting mechanical assembly. Conventional methods for qualification testing of satellite components are costly and time consuming. Furthermore, full-scale vehicles must be subjected to launch loads during testing. The harsh testing environment increases the risk of component damage during qualification. The focus of this research effort was to assess the performance of Structural Health Monitoring (SHM) techniques as replacement for traditional vibration testing. SHM techniques were applied on a small-scale structure representative of a responsive satellite. The test structure consisted of an extruded aluminum space-frame covered with aluminum shear plates, which was assembled using bolted joints. Multiple piezoelectric patches were bonded to the test structure and acted as combined actuators and sensors. Various methods of SHM were explored including impedance-based health monitoring, wave propagation, and conventional frequency response functions. Using these methods in conjunction with finite element modeling, the dynamic properties of the test structure were established and areas of potential damage were identified and localized. The adequacy of the results from each SHM method was validated by comparison to results from conventional vibration testing.

  13. Dynamic characterization of satellite components through non-invasive methods

    Energy Technology Data Exchange (ETDEWEB)

    Mullins, Joshua G [Los Alamos National Laboratory; Wiest, Heather K [Los Alamos National Laboratory; Mascarenas, David D. L. [Los Alamos National Laboratory; Macknelly, David [INST-OFF/AWE; Park, Gyuhae [Los Alamos National Laboratory

    2010-10-21

    The rapid deployment of satellites is hindered by the need to flight-qualify their components and the resulting mechanical assembly. Conventional methods for qualification testing of satellite components are costly and time consuming. Furthermore, full-scale vehicles must be subjected to launch loads during testing. This harsh testing environment increases the risk of component damage during qualification. The focus of this research effort was to assess the performance of Structural Health Monitoring (SHM) techniques as a replacement for traditional vibration testing. SHM techniques were applied on a small-scale structure representative of a responsive satellite. The test structure consisted of an extruded aluminum space-frame covered with aluminum shear plates, which was assembled using bolted joints. Multiple piezoelectric patches were bonded to the test structure and acted as combined actuators and sensors. Various methods of SHM were explored including impedance-based health monitoring, wave propagation, and conventional frequency response functions. Using these methods in conjunction with finite element modelling, the dynamic properties of the test structure were established and areas of potential damage were identified and localized. The adequacy of the results from each SHM method was validated by comparison to results from conventional vibration testing.

  14. Distributed Autonomous Control of Multiple Spacecraft During Close Proximity Operations

    National Research Council Canada - National Science Library

    McCamish, Shawn B

    2007-01-01

    This research contributes to multiple spacecraft control by developing an autonomous distributed control algorithm for close proximity operations of multiple spacecraft systems, including rendezvous...

  15. Exciton multiplication from first principles.

    Science.gov (United States)

    Jaeger, Heather M; Hyeon-Deuk, Kim; Prezhdo, Oleg V

    2013-06-18

    Third-generation photovolatics require demanding cost and power conversion efficiency standards, which may be achieved through efficient exciton multiplication. Therefore, generating more than one electron-hole pair from the absorption of a single photon has vast ramifications on solar power conversion technology. Unlike their bulk counterparts, irradiated semiconductor quantum dots exhibit efficient exciton multiplication, due to confinement-enhanced Coulomb interactions and slower nonradiative losses. The exact characterization of the complicated photoexcited processes within quantum-dot photovoltaics is a work in progress. In this Account, we focus on the photophysics of nanocrystals and investigate three constituent processes of exciton multiplication, including photoexcitation, phonon-induced dephasing, and impact ionization. We quantify the role of each process in exciton multiplication through ab initio computation and analysis of many-electron wave functions. The probability of observing a multiple exciton in a photoexcited state is proportional to the magnitude of electron correlation, where correlated electrons can be simultaneously promoted across the band gap. Energies of multiple excitons are determined directly from the excited state wave functions, defining the threshold for multiple exciton generation. This threshold is strongly perturbed in the presence of surface defects, dopants, and ionization. Within a few femtoseconds following photoexcitation, the quantum state loses coherence through interactions with the vibrating atomic lattice. The phase relationship between single excitons and multiple excitons dissipates first, followed by multiple exciton fission. Single excitons are coupled to multiple excitons through Coulomb and electron-phonon interactions, and as a consequence, single excitons convert to multiple excitons and vice versa. Here, exciton multiplication depends on the initial energy and coupling magnitude and competes with electron

  16. Multiple-port valve

    International Nuclear Information System (INIS)

    Doody, T.J.

    1978-01-01

    A multiple-port valve assembly is designed to direct flow from a primary conduit into any one of a plurality of secondary conduits as well as to direct a reverse flow. The valve includes two mating hemispherical sockets that rotatably receive a spherical valve plug. The valve plug is attached to the primary conduit and includes diverging passageways from that conduit to a plurality of ports. Each of the ports is alignable with one or more of a plurality of secondary conduits fitting into one of the hemispherical sockets. The other hemispherical socket includes a slot for the primary conduit such that the conduit's motion along that slot with rotation of the spherical plug about various axes will position the valve-plug ports in respect to the secondary conduits

  17. Analysis Components Investigation Report

    Science.gov (United States)

    2014-10-01

    ssification a the marg ford and h ures such ge of this l s integratio PREVIOUS WRI ities. For in annotating ame meanin ck by valid rest. These ansion...ent to rder. order. rder el has d to the val, and learning , which ibrary is oo! and feature ovides a Analys 4 4 1 is Component THIS DOCU... learn m tor Machin sed to give to re-rank be execut he model w s the follow ed by any the trainin ciated with ation of the the docume all terms

  18. Impedance of accelerator components

    International Nuclear Information System (INIS)

    Corlett, J.N.

    1996-05-01

    As demands for high luminosity and low emittance particle beams increase, an understanding of the electromagnetic interaction of these beams with their vacuum chamber environment becomes more important in order to maintain the quality of the beam. This interaction is described in terms of the wake field in time domain, and the beam impedance in frequency domain. These concepts are introduced, and related quantities such as the loss factor are presented. The broadband Q = 1 resonator impedance model is discussed. Perturbation and coaxial wire methods of measurement of real components are reviewed

  19. Automotive component failures

    CSIR Research Space (South Africa)

    Heyes, AM

    1998-06-01

    Full Text Available [ However\\ in the presence of a stress concentration the ultimate tensile stress can be exceeded before the ultimate shear stress is reached\\ resulting in a tensile failure 0 [ 2[6[ Metallo`raphy and Ener`y Dispersive Spectroscopy "EDS# A microspecimen...\\ Vol[ 4\\ No[ 1\\ pp[ 018 030\\ 0887 0887 Elsevier Science Ltd[ All rights reserved\\ Pergamon Printed in Great Britain 0249 5296:87 ,08[99 9[99 PII] S0249 5296"87#99909 6 AUTOMOTIVE COMPONENT FAILURES A[ M[ HEYES Advanced Engineering and Testing...

  20. Food Components and Supplements

    DEFF Research Database (Denmark)

    Parlesak, Alexandr

    2012-01-01

    .g., secondary plant metabolites such as flavonoids), or as contaminants that enter the food chain at different stages or during the food production process. For these components, a wide spectrum of biological effects was observed that ranges from health-threatening impacts (e.g., polycyclic aromatic amines...... acting as carcinogens) to health-protective effects (e.g., flavonoids ameliorating detrimental effects of mitochondrial oxidative stress). In particular, secondary plant metabolites along with vitamins, specific types of macronutrients and live bacteria (probiotics) as well as substances promoting...

  1. Mesh Retrieval by Components

    Science.gov (United States)

    Tal, Ayellet; Zuckerberger, Emanuel

    This paper examines the application of the human vision theories of Marr and Biederman to the retrieval of three-dimensional objects. The key idea is to represent an object by an attributed graph that consists of the object's meaningful components as nodes, where each node is fit to a basic shape. A system that realizes this approach was built and tested on a database of about 400 objects and achieves promising results. It is shown that this representation of 3D objects is very compact. Moreover, it gives rise to a retrieval algorithm that is invariant to non-rigid transformations and does not require normalization.

  2. Trade-offs among forest value components in community forests of southwestern Amazonia

    Directory of Open Access Journals (Sweden)

    Christopher Baraloto

    2014-12-01

    Full Text Available Contemporary conservation interventions must balance potential trade-offs between multiple ecosystem services. In tropical forests, much attention has focused on the extent to which carbon-based conservation provided by REDD+ policies can also mitigate biodiversity conservation. In the nearly one-third of tropical forests that are community owned or managed, conservation strategies must also balance the multiple uses of forest products that support local livelihoods. Although much discussion has focused on policy options, little empirical evidence exists to evaluate the potential for trade-offs among different tropical forest value components. We assessed multiple components of forest value, including tree diversity, carbon stocks, and both timber and nontimber forest product resources, in forest communities across the trinational frontier of Brazil, Peru, and Bolivia. We installed 69 0.5-ha vegetation plots in local communities, and we characterized 15 components of forest value for each plot. Principal components analyses revealed two major axes of forest value, the first of which defined a trade-off between diversity of woody plant communities (taxonomic and functional versus aboveground biomass and standing timber volume. The second axis described abundance of commercial species, with strong positive loadings for density of timber and nontimber forest products, including Brazil nut (Bertholletia excelsa and copaiba oil (Copaifera spp.. The observed trade-off between different components of forest value suggests a potential for management conflicts prioritizing biodiversity conservation versus carbon stocks in the region. We discuss the potential for integrative indices of forest value for tropical forest conservation.

  3. Investigation of black and brown carbon multiple-wavelength-dependent light absorption from biomass and fossil fuel combustion source emissions

    Science.gov (United States)

    Michael R. Olson; Mercedes Victoria Garcia; Michael A. Robinson; Paul Van Rooy; Mark A. Dietenberger; Michael Bergin; James Jay Schauer

    2015-01-01

    Quantification of the black carbon (BC) and brown carbon (BrC) components of source emissions is critical to understanding the impact combustion aerosols have on atmospheric light absorption. Multiple-wavelength absorption was measured from fuels including wood, agricultural biomass, coals, plant matter, and petroleum distillates in controlled combustion settings....

  4. Vaccines and multiple sclerosis

    DEFF Research Database (Denmark)

    Frederiksen, J. L.; Topsøe Mailand, M.

    2017-01-01

    An association between certain vaccinations and onset or relapse of multiple sclerosis (MS) has been debated. Based on PubMed, we made a thorough literature review and included all relevant studies, 51 on MS and 15 on optic neuritis (ON). Case studies were excluded. With the exception of a live...... vaccine against yellow fever, vaccinations appear safe in untreated patients with MS and ON. However, most studies were underpowered, and small risks cannot be excluded. One study of BCG vaccination after the first demyelinating event showed even a reduced risk of developing MS. Further studies are needed...

  5. Prognostics for Microgrid Components

    Science.gov (United States)

    Saxena, Abhinav

    2012-01-01

    Prognostics is the science of predicting future performance and potential failures based on targeted condition monitoring. Moving away from the traditional reliability centric view, prognostics aims at detecting and quantifying the time to impending failures. This advance warning provides the opportunity to take actions that can preserve uptime, reduce cost of damage, or extend the life of the component. The talk will focus on the concepts and basics of prognostics from the viewpoint of condition-based systems health management. Differences with other techniques used in systems health management and philosophies of prognostics used in other domains will be shown. Examples relevant to micro grid systems and subsystems will be used to illustrate various types of prediction scenarios and the resources it take to set up a desired prognostic system. Specifically, the implementation results for power storage and power semiconductor components will demonstrate specific solution approaches of prognostics. The role of constituent elements of prognostics, such as model, prediction algorithms, failure threshold, run-to-failure data, requirements and specifications, and post-prognostic reasoning will be explained. A discussion on performance evaluation and performance metrics will conclude the technical discussion followed by general comments on open research problems and challenges in prognostics.

  6. Interactions between photodegradation components

    Directory of Open Access Journals (Sweden)

    Abdollahi Yadollah

    2012-09-01

    Full Text Available Abstract Background The interactions of p-cresol photocatalytic degradation components were studied by response surface methodology. The study was designed by central composite design using the irradiation time, pH, the amount of photocatalyst and the p-cresol concentration as variables. The design was performed to obtain photodegradation % as actual responses. The actual responses were fitted with linear, two factor interactions, cubic and quadratic model to select an appropriate model. The selected model was validated by analysis of variance which provided evidences such as high F-value (845.09, very low P-value (2 = 0.999, adjusted R-squared (Radj2 = 0.998, predicted R-squared (Rpred2 = 0.994 and the adequate precision (95.94. Results From the validated model demonstrated that the component had interaction with irradiation time under 180 min of the time while the interaction with pH was above pH 9. Moreover, photocatalyst and p-cresol had interaction at minimal amount of photocatalyst (p-cresol. Conclusion These variables are interdependent and should be simultaneously considered during the photodegradation process, which is one of the advantages of the response surface methodology over the traditional laboratory method.

  7. Automatic plankton image classification combining multiple view features via multiple kernel learning.

    Science.gov (United States)

    Zheng, Haiyong; Wang, Ruchen; Yu, Zhibin; Wang, Nan; Gu, Zhaorui; Zheng, Bing

    2017-12-28

    Plankton, including phytoplankton and zooplankton, are the main source of food for organisms in the ocean and form the base of marine food chain. As the fundamental components of marine ecosystems, plankton is very sensitive to environment changes, and the study of plankton abundance and distribution is crucial, in order to understand environment changes and protect marine ecosystems. This study was carried out to develop an extensive applicable plankton classification system with high accuracy for the increasing number of various imaging devices. Literature shows that most plankton image classification systems were limited to only one specific imaging device and a relatively narrow taxonomic scope. The real practical system for automatic plankton classification is even non-existent and this study is partly to fill this gap. Inspired by the analysis of literature and development of technology, we focused on the requirements of practical application and proposed an automatic system for plankton image classification combining multiple view features via multiple kernel learning (MKL). For one thing, in order to describe the biomorphic characteristics of plankton more completely and comprehensively, we combined general features with robust features, especially by adding features like Inner-Distance Shape Context for morphological representation. For another, we divided all the features into different types from multiple views and feed them to multiple classifiers instead of only one by combining different kernel matrices computed from different types of features optimally via multiple kernel learning. Moreover, we also applied feature selection method to choose the optimal feature subsets from redundant features for satisfying different datasets from different imaging devices. We implemented our proposed classification system on three different datasets across more than 20 categories from phytoplankton to zooplankton. The experimental results validated that our system

  8. IT Infrastructure Components for Biobanking

    Science.gov (United States)

    Prokosch, H.U.; Beck, A.; Ganslandt, T.; Hummel, M.; Kiehntopf, M.; Sax, U.; Ückert, F.; Semler, S.

    2010-01-01

    Objective Within translational research projects in the recent years large biobanks have been established, mostly supported by homegrown, proprietary software solutions. No general requirements for biobanking IT infrastructures have been published yet. This paper presents an exemplary biobanking IT architecture, a requirements specification for a biorepository management tool and exemplary illustrations of three major types of requirements. Methods We have pursued a comprehensive literature review for biobanking IT solutions and established an interdisciplinary expert panel for creating the requirements specification. The exemplary illustrations were derived from a requirements analysis within two university hospitals. Results The requirements specification comprises a catalog with more than 130 detailed requirements grouped into 3 major categories and 20 subcategories. Special attention is given to multitenancy capabilities in order to support the project-specific definition of varying research and bio-banking contexts, the definition of workflows to track sample processing, sample transportation and sample storage and the automated integration of preanalytic handling and storage robots. Conclusion IT support for biobanking projects can be based on a federated architectural framework comprising primary data sources for clinical annotations, a pseudonymization service, a clinical data warehouse with a flexible and user-friendly query interface and a biorepository management system. Flexibility and scalability of all such components are vital since large medical facilities such as university hospitals will have to support biobanking for varying monocentric and multicentric research scenarios and multiple medical clients. PMID:23616851

  9. Physiotherapy in multiple sclerosis

    Directory of Open Access Journals (Sweden)

    Anna Łuszczyńska

    2015-10-01

    Full Text Available Introduction: Multiple sclerosis (MS is a chronic, progressive, demyelinating disease of the central nervous system. 2.5 million people are affected by MS worldwide; in Poland, the number of patients is approximately 40,000. Patients with multiple sclerosis suffer from a number of symptoms associated with this disease. Aim of the research: To assess the effectiveness of physiotherapy in MS. Material and methods : The study enrolled 25 MS patients aged 27–72 years (including 16 females and 9 males, undergoing 6-week rehabilitation. They were examined twice: before and after rehabilitation. The study used two questionnaires created by the author. Evaluation of the clinical status and disease severity was based on the Kurtzke Expanded Disability Status Scales (EDSS, the Lawton Instrumental Activities of Daily Living (IADL Scale, and the Multiple Sclerosis Impact Scale (MSIS-29. The results were analysed with Student’s t-test and the chi-square (χ 2 test. Results : Statistical analysis showed significant (the level of significance was 0.05 progress in the functional status of the patients after physiotherapy, as evidenced by improved results with respect to the motor efficiency in the Kurtzke Expanded Disability Status Scale (EDSS, the functional assessment in the Lawton Instrumental Activities of Daily Living (IADL Scale, and the influence of MS on patients’ daily life in the Multiple Sclerosis Impact Scale (MSIS-29 seen in the majority of the patients, which confirms a positive impact of the therapy. Conclusions: In the study group, comprehensive rehabilitation had a beneficial influence on the improvement of functional status and the level of motor ability. Physiotherapy turned out to be an extremely effective form of symptomatic treatment of MS patients.

  10. SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE

    International Nuclear Information System (INIS)

    C. Tsang

    2004-01-01

    The purpose of this report is to document the predictions and analyses performed using the seepage model for performance assessment (SMPA) for both the Topopah Spring middle nonlithophysal (Tptpmn) and lower lithophysal (Tptpll) lithostratigraphic units at Yucca Mountain, Nevada. Look-up tables of seepage flow rates into a drift (and their uncertainty) are generated by performing numerical simulations with the seepage model for many combinations of the three most important seepage-relevant parameters: the fracture permeability, the capillary-strength parameter 1/a, and the percolation flux. The percolation flux values chosen take into account flow focusing effects, which are evaluated based on a flow-focusing model. Moreover, multiple realizations of the underlying stochastic permeability field are conducted. Selected sensitivity studies are performed, including the effects of an alternative drift geometry representing a partially collapsed drift from an independent drift-degradation analysis (BSC 2004 [DIRS 166107]). The intended purpose of the seepage model is to provide results of drift-scale seepage rates under a series of parameters and scenarios in support of the Total System Performance Assessment for License Application (TSPA-LA). The SMPA is intended for the evaluation of drift-scale seepage rates under the full range of parameter values for three parameters found to be key (fracture permeability, the van Genuchten 1/a parameter, and percolation flux) and drift degradation shape scenarios in support of the TSPA-LA during the period of compliance for postclosure performance [Technical Work Plan for: Performance Assessment Unsaturated Zone (BSC 2002 [DIRS 160819], Section I-4-2-1)]. The flow-focusing model in the Topopah Spring welded (TSw) unit is intended to provide an estimate of flow focusing factors (FFFs) that (1) bridge the gap between the mountain-scale and drift-scale models, and (2) account for variability in local percolation flux due to

  11. COPD phenotype description using principal components analysis

    DEFF Research Database (Denmark)

    Roy, Kay; Smith, Jacky; Kolsum, Umme

    2009-01-01

    BACKGROUND: Airway inflammation in COPD can be measured using biomarkers such as induced sputum and Fe(NO). This study set out to explore the heterogeneity of COPD using biomarkers of airway and systemic inflammation and pulmonary function by principal components analysis (PCA). SUBJECTS...... AND METHODS: In 127 COPD patients (mean FEV1 61%), pulmonary function, Fe(NO), plasma CRP and TNF-alpha, sputum differential cell counts and sputum IL8 (pg/ml) were measured. Principal components analysis as well as multivariate analysis was performed. RESULTS: PCA identified four main components (% variance...... associations between the variables within components 1 and 2. CONCLUSION: COPD is a multi dimensional disease. Unrelated components of disease were identified, including neutrophilic airway inflammation which was associated with systemic inflammation, and sputum eosinophils which were related to increased Fe...

  12. Component Based Testing with ioco

    NARCIS (Netherlands)

    van der Bijl, H.M.; Rensink, Arend; Tretmans, G.J.

    Component based testing concerns the integration of components which have already been tested separately. We show that, with certain restrictions, the ioco-test theory for conformance testing is suitable for component based testing, in the sense that the integration of fully conformant components is

  13. Component Composition Using Feature Models

    DEFF Research Database (Denmark)

    Eichberg, Michael; Klose, Karl; Mitschke, Ralf

    2010-01-01

    In general, components provide and require services and two components are bound if the first component provides a service required by the second component. However, certain variability in services - w.r.t. how and which functionality is provided or required - cannot be described using standard i...

  14. Electrosprayed core-shell polymer-lipid nanoparticles for active component delivery

    Science.gov (United States)

    Eltayeb, Megdi; Stride, Eleanor; Edirisinghe, Mohan

    2013-11-01

    A key challenge in the production of multicomponent nanoparticles for healthcare applications is obtaining reproducible monodisperse nanoparticles with the minimum number of preparation steps. This paper focus on the use of electrohydrodynamic (EHD) techniques to produce core-shell polymer-lipid structures with a narrow size distribution in a single step process. These nanoparticles are composed of a hydrophilic core for active component encapsulation and a lipid shell. It was found that core-shell nanoparticles with a tunable size range between 30 and 90 nm and a narrow size distribution could be reproducibly manufactured. The results indicate that the lipid component (stearic acid) stabilizes the nanoparticles against collapse and aggregation and improves entrapment of active components, in this case vanillin, ethylmaltol and maltol. The overall structure of the nanoparticles produced was examined by multiple methods, including transmission electron microscopy and differential scanning calorimetry, to confirm that they were of core-shell form.

  15. Electrosprayed core–shell polymer–lipid nanoparticles for active component delivery

    International Nuclear Information System (INIS)

    Eltayeb, Megdi; Edirisinghe, Mohan; Stride, Eleanor

    2013-01-01

    A key challenge in the production of multicomponent nanoparticles for healthcare applications is obtaining reproducible monodisperse nanoparticles with the minimum number of preparation steps. This paper focus on the use of electrohydrodynamic (EHD) techniques to produce core–shell polymer–lipid structures with a narrow size distribution in a single step process. These nanoparticles are composed of a hydrophilic core for active component encapsulation and a lipid shell. It was found that core–shell nanoparticles with a tunable size range between 30 and 90 nm and a narrow size distribution could be reproducibly manufactured. The results indicate that the lipid component (stearic acid) stabilizes the nanoparticles against collapse and aggregation and improves entrapment of active components, in this case vanillin, ethylmaltol and maltol. The overall structure of the nanoparticles produced was examined by multiple methods, including transmission electron microscopy and differential scanning calorimetry, to confirm that they were of core–shell form. (paper)

  16. [Contracts including performance and management of uncertainty].

    Science.gov (United States)

    Duru, G; Garassus, P; Auray, J-P

    2013-09-01

    Since many decades in France, the most important part of ambulatory health care expenditure is represented by drug consumption. By the fact, French patient is indeed the greatest world consumer of pharmaceuticals treatments. Therefore, the regulation authorities by successive strategies, attempt to limit or even restrict market access for new drugs in the health care sector secured by public social insurance coverage. Common objectives are to assess the reimbursement to scientific studies and to fix the price of therapeutics at an acceptable level for both industries and government. New trends try then to determine recently the drug price in a dual approach, as a component of global and effective contract, including performance and outcome. The first diffusion authorization is diffusion concerned, but this concept takes into account the eventual success of new produces in long-term survey. Signed for a fixed period as reciprocal partnership between regulation authorities and pharmaceutics industries, the contract integrates two dimensions of incertitude. The first one is represented by the strategy of new treatments development according to efficacy and adapted price, and the second one is linked to the result of diffusion and determines adapted rules if eventual non-respects of the previous engagement are registered. This paper discusses problems related to this new dimension of incertitude affected by conditional drug prices in market access strategy and the adapted follow-up of new treatment diffusion fixed by "outcome" contract between French regulation administration and pharmaceutics industries in our recent economic context. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  17. Impedance and component heating

    CERN Document Server

    Métral, E; Mounet, N; Pieloni, T; Salvant, B

    2015-01-01

    The impedance is a complex function of frequency, which represents, for the plane under consideration (longitudinal, horizontal or vertical), the force integrated over the length of an element, from a “source” to a “test” wave, normalized by their charges. In general, the impedance in a given plane is a nonlinear function of the test and source transverse coordinates, but it is most of the time sufficient to consider only the first few linear terms. Impedances can influence the motion of trailing particles, in the longitudinal and in one or both transverse directions, leading to energy loss, beam instabilities, or producing undesirable secondary effects such as excessive heating of sensitive components at or near the chamber wall, called beam-induced RF heating. The LHC performance limitations linked to impedances encountered during the 2010-2012 run are reviewed and the currently expected situation during the HL-LHC era is discussed.

  18. Food Components and Supplements

    DEFF Research Database (Denmark)

    Parlesak, Alexandr

    2012-01-01

    The major part of food consists of chemical compounds that can be used for energy production, biological synthesis, or maintenance of metabolic processes by the host. These components are defined as nutrients, and can be categorized into macronutrients (proteins, carbohydrates, triglycerides......, and alcohol), minerals, and micronutrients. The latter category comprises 13 vitamins and a hand full of trace elements. Many micronutrients are used as food supplements and are ingested at doses exceeding the amounts that can be consumed along with food by a factor of 10–100. Both macro- and micronutrients...... can interact with enzyme systems related to xenobiotic metabolism either by regulation of their expression or direct interference with their enzymatic activity. During food consumption, we consume a wide range of xenobiotics along with the consumable food, either as an original part of the food (e...

  19. High thermal load component

    International Nuclear Information System (INIS)

    Fuse, Toshiaki; Tachikawa, Nobuo.

    1996-01-01

    A cooling tube made of a pure copper is connected to the inner portion of an armour (heat resistant member) made of an anisotropic carbon/carbon composite (CFC) material. The CFC material has a high heat conductivity in longitudinal direction of fibers and has low conductivity in perpendicular thereto. Fibers extending in the armour from a heat receiving surface just above the cooling tube are directly connected to the cooling tube. A portion of the fibers extending from a heat receiving surface other than portions not just above the cooling tube is directly bonded to the cooling tube. Remaining fibers are disposed so as to surround the cooling tube. The armour and the cooling tube are soldered using an active metal flux. With such procedures, high thermal load components for use in a thermonuclear reactor are formed, which are excellent in a heat removing characteristic and hardly causes defects such as crackings and peeling. (I.N.)

  20. Autonomous component carrier selection

    DEFF Research Database (Denmark)

    Garcia, Luis Guilherme Uzeda; Pedersen, Klaus; Mogensen, Preben

    2009-01-01

    management and efficient system operation. Due to the expected large number of user-deployed cells, centralized network planning becomes unpractical and new scalable alternatives must be sought. In this article, we propose a fully distributed and scalable solution to the interference management problem......Low-power base stations such as e.g. Femto-cells are one of the candidates for high data rate provisioning in local areas, such as residences, apartment complexes, business offices and outdoor hotspot scenarios. Unfortunately, the benefits are not without new challenges in terms of interference...... in local areas, basing our study case on LTE-Advanced. We present extensive network simulation results to demonstrate that a simple and robust interference management scheme, called autonomous component carrier selection allows each cell to select the most attractive frequency configuration; improving...

  1. Requirements for containment system components in CANDU nuclear power plants

    International Nuclear Information System (INIS)

    1988-02-01

    This Standard specifies the requirements and establishes the rules for design, fabrication, and installation of pressure-retaining containment system components. In this Standard the term 'components' includes non registered items

  2. An integrated computable general equilibrium model including multiple types and uses of water

    OpenAIRE

    Luckmann, Jonas Jens

    2015-01-01

    Water is a scarce resource in many regions of the world and competition for water is an increasing problem. To countervail this trend policies are needed regulating supply and demand for water. As water is used in many economic activities, water related management decisions usually have complex implications. Economic simulation models have been proven useful to ex-ante assess the consequences of policy changes. Specifically, Computable General Equilibrium (CGE) models are very suitable to ana...

  3. The dyad palindromic glutathione transferase P enhancer binds multiple factors including AP1.

    OpenAIRE

    Diccianni, M B; Imagawa, M; Muramatsu, M

    1992-01-01

    Glutathione Transferase P (GST-P) gene expression is dominantly regulated by an upstream enhancer (GPEI) consisting of a dyad of palindromically oriented imperfect TPA (12-O-tetradecanoyl-phorbol-13-acetate)-responsive elements (TRE). GPEI is active in AP1-lacking F9 cells as well in AP1-containing HeLa cells. Despite GPEI's similarity to a TRE, c-jun co-transfection has only a minimal effect on transactivation. Antisense c-jun and c-fos co-transfection experiments further demonstrate the lac...

  4. Body Awareness and Movement for Students with Multiple Disabilities Including Visual Impairments

    Science.gov (United States)

    DePountis, Vicki; Cady, Deborah; Hallak, Tracy

    2013-01-01

    This conference presentation examines concept development for congenitally blind students. It presents current research on best-practice for teaching this population. Examples of strategies to reinforce understanding of body concepts, spatial awareness, and positional language, while promoting mirroring, self regulation, and purposeful movement to…

  5. Multiple Pathogens Including Potential New Species in Tick Vectors in Côte d'Ivoire.

    Directory of Open Access Journals (Sweden)

    Cyrille Bilé Ehounoud

    2016-01-01

    Full Text Available Our study aimed to assess the presence of different pathogens in ticks collected in two regions in Côte d'Ivoire.Real-time PCR and standard PCR assays coupled to sequencing were used. Three hundred and seventy eight (378 ticks (170 Amblyomma variegatum, 161 Rhipicepalus microplus, 3 Rhipicephalus senegalensis, 27 Hyalomma truncatum, 16 Hyalomma marginatum rufipes, and 1 Hyalomma impressum were identified and analyzed. We identified as pathogenic bacteria, Rickettsia africae in Am. variegatum (90%, Rh. microplus (10% and Hyalomma spp. (9%, Rickettsia aeschlimannii in Hyalomma spp. (23%, Rickettsia massiliae in Rh. senegalensis (33% as well as Coxiella burnetii in 0.2%, Borrelia sp. in 0.2%, Anaplasma centrale in 0.2%, Anaplasma marginale in 0.5%, and Ehrlichia ruminantium in 0.5% of all ticks. Potential new species of Borrelia, Anaplasma, and Wolbachia were detected. Candidatus Borrelia africana and Candidatus Borrelia ivorensis (detected in three ticks are phylogenetically distant from both the relapsing fever group and Lyme disease group borreliae; both were detected in Am. variegatum. Four new genotypes of bacteria from the Anaplasmataceae family were identified, namely Candidatus Anaplasma ivorensis (detected in three ticks, Candidatus Ehrlichia urmitei (in nine ticks, Candidatus Ehrlichia rustica (in four ticks, and Candidatus Wolbachia ivorensis (in one tick.For the first time, we demonstrate the presence of different pathogens such as R. aeschlimannii, C. burnetii, Borrelia sp., A. centrale, A. marginale, and E. ruminantium in ticks in Côte d'Ivoire as well as potential new species of unknown pathogenicity.

  6. Multiple Pathogens Including Potential New Species in Tick Vectors in Côte d'Ivoire.

    Science.gov (United States)

    Ehounoud, Cyrille Bilé; Yao, Kouassi Patrick; Dahmani, Mustapha; Achi, Yaba Louise; Amanzougaghene, Nadia; Kacou N'Douba, Adèle; N'Guessan, Jean David; Raoult, Didier; Fenollar, Florence; Mediannikov, Oleg

    2016-01-01

    Our study aimed to assess the presence of different pathogens in ticks collected in two regions in Côte d'Ivoire. Real-time PCR and standard PCR assays coupled to sequencing were used. Three hundred and seventy eight (378) ticks (170 Amblyomma variegatum, 161 Rhipicepalus microplus, 3 Rhipicephalus senegalensis, 27 Hyalomma truncatum, 16 Hyalomma marginatum rufipes, and 1 Hyalomma impressum) were identified and analyzed. We identified as pathogenic bacteria, Rickettsia africae in Am. variegatum (90%), Rh. microplus (10%) and Hyalomma spp. (9%), Rickettsia aeschlimannii in Hyalomma spp. (23%), Rickettsia massiliae in Rh. senegalensis (33%) as well as Coxiella burnetii in 0.2%, Borrelia sp. in 0.2%, Anaplasma centrale in 0.2%, Anaplasma marginale in 0.5%, and Ehrlichia ruminantium in 0.5% of all ticks. Potential new species of Borrelia, Anaplasma, and Wolbachia were detected. Candidatus Borrelia africana and Candidatus Borrelia ivorensis (detected in three ticks) are phylogenetically distant from both the relapsing fever group and Lyme disease group borreliae; both were detected in Am. variegatum. Four new genotypes of bacteria from the Anaplasmataceae family were identified, namely Candidatus Anaplasma ivorensis (detected in three ticks), Candidatus Ehrlichia urmitei (in nine ticks), Candidatus Ehrlichia rustica (in four ticks), and Candidatus Wolbachia ivorensis (in one tick). For the first time, we demonstrate the presence of different pathogens such as R. aeschlimannii, C. burnetii, Borrelia sp., A. centrale, A. marginale, and E. ruminantium in ticks in Côte d'Ivoire as well as potential new species of unknown pathogenicity.

  7. Digital Components in Swedish NPP Power Systems

    International Nuclear Information System (INIS)

    Karlsson, Mattias; Eriksson, Tage

    2015-01-01

    Swedish nuclear power plants have over the last 20 years of operation modernised or exchanged several systems and components of the electrical power system. Within these works, new components based on digital technology have been employed in order to realize functionality that was previously achieved by using electro-mechanical or analogue technology. Components and systems such as relay protection, rectifiers, inverters, variable speed drives and diesel-generator sets are today equipped with digital components. Several of the systems and components fulfil functions with a safety-role in the NPP. Recently, however, a number of incidents have occurred which highlight deficiencies in the design or HMI of the equipment, which warrants questions whether there are generic problems with some applications of digital components that needs to be addressed. The use of digital components has presented cost effective solutions, or even the only available solution on the market enabling a modernisation. The vast majority of systems using digital components have been operating without problems and often contribute to improved safety but the challenge of non-detectable, or non-identifiable, failure modes remain. In this paper, the extent to which digital components are used in Swedish NPP power systems will be presented including a description of typical applications. Based on data from maintenance records and fault reports, as well as interviews with designers and maintenance personnel, the main areas where problems have been encountered and where possible risks have been identified will be described. The paper intends to investigate any 'tell-tales' that could give signals of unwanted behaviour. Furthermore, particular benefits experienced by using digital components will be highlighted. The paper will also discuss the safety relevance of these findings and suggest measures to improve safety in the application of digital components in power systems. (authors)

  8. Smoldering multiple myeloma.

    Science.gov (United States)

    Rajkumar, S Vincent; Landgren, Ola; Mateos, María-Victoria

    2015-05-14

    Smoldering multiple myeloma (SMM) is an asymptomatic clonal plasma cell disorder. SMM is distinguished from monoclonal gammopathy of undetermined significance by a much higher risk of progression to multiple myeloma (MM). There have been major advances in the diagnosis, prognosis, and management of SMM in the last few years. These include a revised disease definition, identification of several new prognostic factors, a classification based on underlying cytogenetic changes, and new treatment options. Importantly, a subset of patients previously considered SMM is now reclassified as MM on the basis of biomarkers identifying patients with an ≥80% risk of progression within 2 years. SMM has assumed greater significance on the basis of recent trials showing that early therapy can be potentially beneficial to patients. As a result, there is a need to accurately diagnose and risk-stratify patients with SMM, including routine incorporation of modern imaging and laboratory techniques. In this review, we outline current concepts in diagnosis and risk stratification of SMM, and provide specific recommendations on the management of SMM. © 2015 by The American Society of Hematology.

  9. Modular core component support for nuclear reactor

    International Nuclear Information System (INIS)

    Finch, L.M.; Anthony, A.J.

    1975-01-01

    The core of a nuclear reactor is made up of a plurality of support modules for containing components such as fuel elements, reflectors and control rods. Each module includes a component support portion located above a grid plate in a low-pressure coolant zone and a coolant inlet portion disposed within a module receptacle which depends from the grid plate into a zone of high-pressure coolant. Coolant enters the module through aligned openings within the receptacle and module inlet portion and flows upward into contact with the core components. The modules are hydraulically balanced within the receptacles to prevent expulsion by the upward coolant forces. (U.S.)

  10. Measurements for stresses in machine components

    CERN Document Server

    Yakovlev, V F

    1964-01-01

    Measurements for Stresses in Machine Components focuses on the state of stress and strain of components and members, which determines the service life and strength of machines and structures. This book is divided into four chapters. Chapter I describes the physical basis of several methods of measuring strains, which includes strain gauges, photoelasticity, X-ray diffraction, brittle coatings, and dividing grids. The basic concepts of the electric strain gauge method for measuring stresses inside machine components are covered in Chapter II. Chapter III elaborates on the results of experim

  11. Sandia_HighTemperatureComponentEvaluation_2015

    Energy Technology Data Exchange (ETDEWEB)

    Cashion, Avery T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    The objective of this project is to perform independent evaluation of high temperature components to determine their suitability for use in high temperature geothermal tools. Development of high temperature components has been increasing rapidly due to demand from the high temperature oil and gas exploration and aerospace industries. Many of these new components are at the late prototype or first production stage of development and could benefit from third party evaluation of functionality and lifetime at elevated temperatures. In addition to independent testing of new components, this project recognizes that there is a paucity of commercial-off-the-shelf COTS components rated for geothermal temperatures. As such, high-temperature circuit designers often must dedicate considerable time and resources to determine if a component exists that they may be able to knead performance out of to meet their requirements. This project aids tool developers by characterization of select COTS component performances beyond published temperature specifications. The process for selecting components includes public announcements of project intent (e.g., FedBizOps), direct discussions with candidate manufacturers,and coordination with other DOE funded programs.

  12. Catalog of components for electric and hybrid vehicle propulsion systems

    Science.gov (United States)

    Eissler, H. C.

    1981-01-01

    This catalog of commercially available electric and hybrid vehicle propulsion system components is intended for designers and builders of these vehicles and contains 50 categories of components. These categories include those components used between the battery terminals and the output axle hub, as well as some auxiliary equipment. An index of the components and a listing of the suppliers and their addresses and phone numbers are included.

  13. Iterative Mixture Component Pruning Algorithm for Gaussian Mixture PHD Filter

    Directory of Open Access Journals (Sweden)

    Xiaoxi Yan

    2014-01-01

    Full Text Available As far as the increasing number of mixture components in the Gaussian mixture PHD filter is concerned, an iterative mixture component pruning algorithm is proposed. The pruning algorithm is based on maximizing the posterior probability density of the mixture weights. The entropy distribution of the mixture weights is adopted as the prior distribution of mixture component parameters. The iterative update formulations of the mixture weights are derived by Lagrange multiplier and Lambert W function. Mixture components, whose weights become negative during iterative procedure, are pruned by setting corresponding mixture weights to zeros. In addition, multiple mixture components with similar parameters describing the same PHD peak can be merged into one mixture component in the algorithm. Simulation results show that the proposed iterative mixture component pruning algorithm is superior to the typical pruning algorithm based on thresholds.

  14. Multiple network alignment on quantum computers

    Science.gov (United States)

    Daskin, Anmer; Grama, Ananth; Kais, Sabre

    2014-12-01

    Comparative analyses of graph-structured datasets underly diverse problems. Examples of these problems include identification of conserved functional components (biochemical interactions) across species, structural similarity of large biomolecules, and recurring patterns of interactions in social networks. A large class of such analyses methods quantify the topological similarity of nodes across networks. The resulting correspondence of nodes across networks, also called node alignment, can be used to identify invariant subgraphs across the input graphs. Given graphs as input, alignment algorithms use topological information to assign a similarity score to each -tuple of nodes, with elements (nodes) drawn from each of the input graphs. Nodes are considered similar if their neighbors are also similar. An alternate, equivalent view of these network alignment algorithms is to consider the Kronecker product of the input graphs and to identify high-ranked nodes in the Kronecker product graph. Conventional methods such as PageRank and HITS (Hypertext-Induced Topic Selection) can be used for this purpose. These methods typically require computation of the principal eigenvector of a suitably modified Kronecker product matrix of the input graphs. We adopt this alternate view of the problem to address the problem of multiple network alignment. Using the phase estimation algorithm, we show that the multiple network alignment problem can be efficiently solved on quantum computers. We characterize the accuracy and performance of our method and show that it can deliver exponential speedups over conventional (non-quantum) methods.

  15. Universal multi-component prevention programs for alcohol misuse in young people.

    Science.gov (United States)

    Foxcroft, David R; Tsertsvadze, Alexander

    2011-09-07

    Alcohol misuse in young people is a cause of concern for health services, policy makers, prevention workers, and criminal justice system, youth workers, teachers, and parents. To systematically review evidence on the effectiveness of universal multi-component prevention programs in preventing alcohol misuse in school-aged children up to 18 years of age. To update a part of a previously published Cochrane systematic review. Relevant evidence (up to 2002) was selected from the previous Cochrane review. Later studies, to July 2010, were identified from MEDLINE, Cochrane Central Register of Controlled Trials, EMBASE, Project CORK, and PsycINFO. Randomized trials evaluating universal multi-component prevention programs (intervention delivered in more than one setting) and reporting outcomes for alcohol use in students 18 years of age or younger were included. Two reviewers screened titles/abstracts and full text of identified records. Two reviewers extracted relevant data independently using an a priori defined extraction form. Risk of bias was assessed. 20 parallel-group trials were included. The reporting quality of trials was poor, only 25% and 5% of them reporting adequate method of randomisation and program allocation concealment, respectively. Incomplete data was adequately addressed in about half of the trials and this information was unclear for about 20% of the trials. Due to extensive heterogeneity across interventions, populations, and outcomes, the results were summarized only qualitatively.12 of the 20 trials showed some evidence of effectiveness compared to a control or other intervention group, with persistence of effects ranging from 3 months to 3 years. Of the remaining 8 trials, one trial reported significant effects using one-tailed tests and 7 trials reported no significant effects of the multi-component interventions for reducing alcohol misuse.Assessment of the additional benefit of multiple versus single component interventions was possible in 7

  16. Bioactive Components in Fish Venoms

    Science.gov (United States)

    Ziegman, Rebekah; Alewood, Paul

    2015-01-01

    Animal venoms are widely recognized excellent resources for the discovery of novel drug leads and physiological tools. Most are comprised of a large number of components, of which the enzymes, small peptides, and proteins are studied for their important bioactivities. However, in spite of there being over 2000 venomous fish species, piscine venoms have been relatively underrepresented in the literature thus far. Most studies have explored whole or partially fractioned venom, revealing broad pharmacology, which includes cardiovascular, neuromuscular, cytotoxic, inflammatory, and nociceptive activities. Several large proteinaceous toxins, such as stonustoxin, verrucotoxin, and Sp-CTx, have been isolated from scorpaenoid fish. These form pores in cell membranes, resulting in cell death and creating a cascade of reactions that result in many, but not all, of the physiological symptoms observed from envenomation. Additionally, Natterins, a novel family of toxins possessing kininogenase activity have been found in toadfish venom. A variety of smaller protein toxins, as well as a small number of peptides, enzymes, and non-proteinaceous molecules have also been isolated from a range of fish venoms, but most remain poorly characterized. Many other bioactive fish venom components remain to be discovered and investigated. These represent an untapped treasure of potentially useful molecules. PMID:25941767

  17. Radiation damage in components

    International Nuclear Information System (INIS)

    Takano, Tomehachi

    1977-01-01

    The performance change of typical capacitors and resistors in electronic components by Co-60 γ-irradiation from the 1320 Ci source was examined in the range of 10 5 to 10 8 R. Specifically, the characteristic change during irradiation and the recovery after irradiation were continuously observed. The capacity change is +2.4% at maximum in ceramic and metallized paper capacitors, and -2.4% at maximum in mylar and paper capacitors. It is also +-0.4% at maximum in mica and polystyrene capacitors. Some of these capacitors showed the recovery of the capacity change, but the others did not. Dielectric loss varied by 15% at larger dose in some capacitors, and the recovery was not observed. While, the insulation resistance of the resistors of 10 15 Ω or more lowered to 10 13 Ω or less after 10 to 30 sec. irradiation, but recovered soon nearly to the initial values after irradiation was interrupted. The resistance change of carbon film resistors is about 0.2 to 2%, and recovered to the initial values in 100 hours after irradiation. The resistance change of composition resistors is large over the range of -13 to +35%, besides, no sign of recovery was seen. In carbon film resistors, the surface insulated type indicated far better results which are assumed to be caused by the selection of element materials and the forming of coating materials. (Wakatsuki, Y.)

  18. Magnesium for Crashworthy Components

    Science.gov (United States)

    Abbott, T.; Easton, M.; Schmidt, R.

    Most applications of magnesium in automobiles are for nonstructural components. However, the light weight properties of magnesium make it attractive in structural applications where energy absorption in a crash is critical. Because most deformation in a crash occurs as bending rather than simple tension or compression, the advantages of magnesium are greater than anticipated simply from tensile strength to weight ratios. The increased thickness possible with magnesium strongly influences bending behavior and theoretical calculations suggest almost an order of magnitude greater energy absorption with magnesium compared to the same weight of steel. The strain rate sensitivity of steel is of concern for energy absorption. Mild steels exhibit a distinct yield point which increases with strain rate. At strain rates typical of vehicle impact, this can result in strain localization and poor energy absorption. Magnesium alloys with relatively low aluminum contents exhibit strain rate sensitivity, however, this is manifest as an increase in work hardening and tensile / yield ratio. This behavior suggests that the performance of magnesium alloys in terms of energy absorption actually improves at high strain rates.

  19. The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

    International Nuclear Information System (INIS)

    Salmela, Olli

    2005-01-01

    In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered

  20. The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

    Energy Technology Data Exchange (ETDEWEB)

    Salmela, Olli [Nokia Networks, P.O. Box 301, 00045 Nokia Group (Finland)]. E-mail: olli.salmela@nokia.com

    2005-08-01

    In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered.

  1. Evaluation of relationship between metacognition components and dysfunctional attitudes in outpatients with bipolar mood disorder II

    Directory of Open Access Journals (Sweden)

    H Kazemi

    2012-05-01

    Full Text Available Introduction: The aim of this study was to evaluate the relationship between metacognitive components and dysfunctional attitudes in outpatients with bipolar mood disorder II. Methods: Thirty-six young adult outpatients with current diagnoses of BMD II(20 females and 16 males were recruited from Esfahan Counseling Center. Diagnoses were based on the Structured Clinical Interview for DSM-IV Axis I Disorder-Clinical Version(SCID-CV. A battery of questionnaires including Metacognition Questionnaire and Dysfunctional Attitude Scale(DAS were self-assessed by patients before medical therapy. Results: Pearson's correlation analysis showed that the components of metacognition and its relationship with dysfunctional attitudes is positive and significant(r= 28/0, p<0/05. Multiple regression analysis showed that two of the metacognitive components emerged as potentially useful in prediction of dysfunctional attitudes(negative beliefs about uncontrollability, danger and thoughts control. Also, results indicated that those two components have a significant positive relationship with vulnerability, perfectionism and effectivenessR²= 0/29, 0/35; p<0/05. Components of positive beliefs about worry and beliefs about cognitive self-consciousness related to cognitive confidence in predicting the criterion variable and its components showed no significant contribution. Conclusion: Study findings suggest that DSM-IV BMD II outpatients with metacognitive distortions have shown higher levels of dysfunctional attitudes.

  2. Transcriptome analysis of all two-component regulatory system mutants of Escherichia coli K-12.

    Science.gov (United States)

    Oshima, Taku; Aiba, Hirofumi; Masuda, Yasushi; Kanaya, Shigehiko; Sugiura, Masahito; Wanner, Barry L; Mori, Hirotada; Mizuno, Takeshi

    2002-10-01

    We have systematically examined the mRNA profiles of 36 two-component deletion mutants, which include all two-component regulatory systems of Escherichia coli, under a single growth condition. DNA microarray results revealed that the mutants belong to one of three groups based on their gene expression profiles in Luria-Bertani broth under aerobic conditions: (i) those with no or little change; (ii) those with significant changes; and (iii) those with drastic changes. Under these conditions, the anaeroresponsive ArcB/ArcA system, the osmoresponsive EnvZ/OmpR system and the response regulator UvrY showed the most drastic changes. Cellular functions such as flagellar synthesis and expression of the RpoS regulon were affected by multiple two-component systems. A high correlation coefficient of expression profile was found between several two-component mutants. Together, these results support the view that a network of functional interactions, such as cross-regulation, exists between different two-component systems. The compiled data are avail-able at our website (http://ecoli.aist-nara.ac.jp/xp_analysis/ 2_components).

  3. The Updated Multiple Star Catalog

    Science.gov (United States)

    Tokovinin, Andrei

    2018-03-01

    The catalog of hierarchical stellar systems with three or more components is an update of the original 1997 version. For 2000 hierarchies, the new Multiple Star Catalog (MSC) provides distances, component masses and periods, and supplementary information (astrometry, photometry, identifiers, orbits, notes). The MSC content and format are explained, and its incompleteness and strong observational selection are stressed. Nevertheless, the MSC can be used for statistical studies and is a valuable source for planning observations of multiple stars. Rare classes of stellar hierarchies found in the MSC (with six or seven components, extremely eccentric orbits, planar and possibly resonant orbits, hosting planets) are briefly presented. High-order hierarchies have smaller velocity dispersion compared to triples and are often associated with moving groups. The paper concludes with an analysis of the ratio of periods and separations between inner and outer subsystems. In wide hierarchies, the ratio of semimajor axes, estimated statistically, is distributed between 3 and 300, with no evidence of dynamically unstable systems.

  4. In Australia: Multiple Intelligences in Multiple Settings.

    Science.gov (United States)

    Vialle, Wilma

    1997-01-01

    In Australia, Gardner's multiple-intelligences theory has strongly influenced primary, preschool, and special education. A survey of 30 schools revealed that teachers use two basic approaches: teaching to, and teaching through, multiple intelligences. The first approach might develop children's music skills via playing an instrument. The second…

  5. Incremental Tensor Principal Component Analysis for Handwritten Digit Recognition

    Directory of Open Access Journals (Sweden)

    Chang Liu

    2014-01-01

    Full Text Available To overcome the shortcomings of traditional dimensionality reduction algorithms, incremental tensor principal component analysis (ITPCA based on updated-SVD technique algorithm is proposed in this paper. This paper proves the relationship between PCA, 2DPCA, MPCA, and the graph embedding framework theoretically and derives the incremental learning procedure to add single sample and multiple samples in detail. The experiments on handwritten digit recognition have demonstrated that ITPCA has achieved better recognition performance than that of vector-based principal component analysis (PCA, incremental principal component analysis (IPCA, and multilinear principal component analysis (MPCA algorithms. At the same time, ITPCA also has lower time and space complexity.

  6. [Current development of rapid high-throughout determination technology for total components of traditional Chinese medicines and formula and synthetic immunity chip method].

    Science.gov (United States)

    He, Fu-Yuan; Deng, Kai-Wen; Zeng, Jiao-Li; Dai, Ru-Wen; Dai, Ru-Wen; Xia, Zan-Shao; Liu, Weng-Long; Shi, Ji-Lian

    2012-10-01

    The qualitative and quantitative analysis on traditional Chinese medicine and formula components can be made by chemical and instrumental analysis methods. Of both, the instrumental analysis methods play a dominant role, including HPLC, HPLC-MS, HPLC-NMR, GC, GC-MS, biochemical and biological effect. But because traditional Chinese medicines and formula have complicated components, chemical methods are so unspecific that they shall be used less or with caution. While instrumental analysis methods are so specific that they are appropriate for analyzing complicated single component. The analysis techniques for multiple components of traditional Chinese medicines and formula focus on fingerprints, but all of these analysis techniques are limited by the pre-requisite of separation and the lack of general-purpose detectors and therefore being hard to realize the determination of all components of traditional Chinese medicines and formula. In the natural world, however, organisms identify native and alien components through specificity and non-specificity of clusters decided by antigens and antibodies. For example, components of traditional Chinese medicines are directly or indirectly synthesized into antigens and injected into animals, in order to generate specific antibodies and then collect cross reaction information of these components to specific antibodies. As for components without cross reaction, their contents shall be directly read out on the basis of the inhibition rate curve of competitive reaction for specificity of antigens and antibodies. Besides, a cross inhibition rate matrix shall be established first, and them a multiple regression linear equation between cross component concentration or concentration logarithm and inhibition rate by labeling the immunity competitive reaction between antibodies and haptens of traditional Chinese medicine and compound components, and then solved to obtain concentration of each component. The two results are combined to

  7. Systematic imaging review: Multiple Sclerosis

    Directory of Open Access Journals (Sweden)

    Aparna Katdare

    2015-01-01

    Full Text Available Multiple sclerosis (MS is a chronic, inflammatory disease of the central nervous system characterised by immune-mediated demyelination, and is a leading cause of neurological disability worldwide. It has a wide spectrum of clinical presentations which overlap with other neurological conditions many times. Further, the radiological array of findings in MS can also be confused for multiple other conditions, leading to the need to look for the more typical findings, and interpret these in close conjunction with the clinical picture including temporal evolution. This review aims to revisit the MRI findings in MS, including recent innovations in imaging, and to help distinguish MS from its mimics.

  8. Multiple myeloma: Looking beyond standards

    Directory of Open Access Journals (Sweden)

    Esha Kaul

    2016-01-01

    Full Text Available Multiple myeloma has been regarded as an incurable disease with frequent relapses. The diagnostic criteria have been revised multiple times to include early stage of the disease where treatment can be effective and can prolong the survival. Newer diagnostic criteria for myeloma have incorporated ≥60% plasma cells in the bone marrow and serum free light chain ratio (involved to uninvolved free light chains of ≥100. The role of positron emission tomography-computed tomography scans has been recognized, and it has been increasingly utilized upfront in the management of multiple myeloma. Role of minimal residual disease monitoring has been studied in multiple trials and will in near future guide the treatment. Autologous stem cell transplant is still the preferred consolidation therapy after initial three or four drug induction. With the use of novel drugs combinations and with emerging treatment options the standard of care of myeloma patients will change.

  9. Multiple sclerosis and organic solvents

    DEFF Research Database (Denmark)

    Mortensen, J T; Brønnum-Hansen, Henrik; Rasmussen, K

    1998-01-01

    We investigated a possible causal relation between exposure to organic solvents in Danish workers (housepainters, typographers/printers, carpenters/cabinetmakers) and onset of multiple sclerosis. Data on men included in the Danish Multiple Sclerosis Register (3,241 men) were linked with data from......, and butchers. Over a follow-up period of 20 years, we observed no increase in the incidence of multiple sclerosis among men presumed to be exposed to organic solvents. It was not possible to obtain data on potential confounders, and the study design has some potential for selection bias. Nevertheless......, the study does not support existing hypotheses regarding an association between occupational exposure to organic solvents and multiple sclerosis....

  10. Multiple scattering in the nuclear rearrangement reactions at medium energy

    International Nuclear Information System (INIS)

    Tekou, A.

    1980-09-01

    It is shown that the multiple scattering mechanism is very important in the transfer of the large momenta involved in the nuclear rearrangement reactions at medium energy. In contrast to the usual belief, the reaction cross-section is not very sensitive to the high momenta components of the nuclear wave function. The multiple scattering mechanism is especially important in 4 He(p,d) 3 He reaction around 800 MeV. Here the collisions involving two nucleons of the target nucleus are dominant. The triple collisions contribution is also important. The four collision contribution is negligible in the forward direction and sizeable at large angles. Thus, using the K.M.T. approach in DWBA calculations, the second order term of the optical potential must be included. So, is it not well established that the second term of the K.M.T. optical potential is important for the proton elastic scattering on light nuclei. (author)

  11. School Library Website Components

    Science.gov (United States)

    Jurkowski, Odin

    2004-01-01

    School library websites are a necessity. The earliest adopters have now had almost 10 years for development and redesign. Many sites have gone through numerous iterations with major improvements each time. Issues of cost, time, technology and training have made the discussion more a matter of deciding what to include and how to structure the sites…

  12. Including gauge corrections to thermal leptogenesis

    International Nuclear Information System (INIS)

    Huetig, Janine

    2013-01-01

    This thesis provides the first approach of a systematic inclusion of gauge corrections to leading order to the ansatz of thermal leptogenesis. We have derived a complete expression for the integrated lepton number matrix including all resummations needed. For this purpose, a new class of diagram has been invented, namely the cylindrical diagram, which allows diverse investigations into the topic of leptogenesis such as the case of resonant leptogenesis. After a brief introduction of the topic of the baryon asymmetry in the universe and a discussion of its most promising solutions as well as their advantages and disadvantages, we have presented our framework of thermal leptogenesis. An effective model was described as well as the associated Feynman rules. The basis for using nonequilibrium quantum field theory has been built in chapter 3. At first, the main definitions have been presented for equilibrium thermal field theory, afterwards we have discussed the Kadanoff-Baym equations for systems out of equilibrium using the example of the Majorana neutrino. The equations have also been solved in the context of leptogenesis in chapter 4. Since gauge corrections play a crucial role throughout this thesis, we have also repeated the naive ansatz by replacing the free equilibrium propagator by propagators including thermal damping rates due to the Standard Model damping widths for lepton and Higgs fields. It is shown that this leads to a comparable result to the solutions of the Boltzmann equations for thermal leptogenesis. Thus it becomes obvious that Standard Model corrections are not negligible for thermal leptogenesis and therefore need to be included systematically from first principles. In order to achieve this we have started discussing the calculation of ladder rung diagrams for Majorana neutrinos using the HTL and the CTL approach in chapter 5. All gauge corrections are included in this framework and thus it has become the basis for the following considerations

  13. MSAViewer: interactive JavaScript visualization of multiple sequence alignments.

    Science.gov (United States)

    Yachdav, Guy; Wilzbach, Sebastian; Rauscher, Benedikt; Sheridan, Robert; Sillitoe, Ian; Procter, James; Lewis, Suzanna E; Rost, Burkhard; Goldberg, Tatyana

    2016-11-15

    The MSAViewer is a quick and easy visualization and analysis JavaScript component for Multiple Sequence Alignment data of any size. Core features include interactive navigation through the alignment, application of popular color schemes, sorting, selecting and filtering. The MSAViewer is 'web ready': written entirely in JavaScript, compatible with modern web browsers and does not require any specialized software. The MSAViewer is part of the BioJS collection of components. The MSAViewer is released as open source software under the Boost Software License 1.0. Documentation, source code and the viewer are available at http://msa.biojs.net/Supplementary information: Supplementary data are available at Bioinformatics online. msa@bio.sh. © The Author 2016. Published by Oxford University Press.

  14. Towards Prognostics for Electronics Components

    Data.gov (United States)

    National Aeronautics and Space Administration — Electronics components have an increasingly critical role in avionics systems and in the development of future aircraft systems. Prognostics of such components is...

  15. Software Components for Web Services

    OpenAIRE

    Ramachandran, Muthu; Nair, T. R. Gopalakrsihnan; Selvarani, R.

    2010-01-01

    Service-oriented computing has emerged as the new area to address software as a service. This paper proposes a model for component based development for service-oriented systems and have created best practice guidelines on software component design.

  16. Smoldering Multiple Myeloma

    Directory of Open Access Journals (Sweden)

    Minjie Gao

    2015-01-01

    Full Text Available Smoldering multiple myeloma (SMM is an asymptomatic precursor stage of multiple myeloma (MM characterized by clonal bone marrow plasma cells (BMPC ≥ 10% and/or M protein level ≥ 30 g/L in the absence of end organ damage. It represents an intermediate stage between monoclonal gammopathy of undetermined significance (MGUS and symptomatic MM. The risk of progression to symptomatic MM is not uniform, and several parameters have been reported to predict the risk of progression. These include the level of M protein and the percentage of BMPC, the proportion of immunophenotypically aberrant plasma cells, and the presence of immunoparesis, free light-chain (FLC ratio, peripheral blood plasma cells (PBPC, pattern of serum M protein evolution, abnormal magnetic resonance imaging (MRI, cytogenetic abnormalities, IgA isotype, and Bence Jones proteinuria. So far treatment is still not recommended for SMM, because several trials suggested that patients with SMM do not benefit from early treatment. However, the Mateos et al. trial showed a survival benefit after early treatment with lenalidomide plus dexamethasone in patients with high-risk SMM. This trial has prompted a reevaluation of early treatment in an asymptomatic patient population.

  17. [Biomarkers in multiple sclerosis].

    Science.gov (United States)

    Fernández, Óscar; Arroyo-González, Rafael; Rodríguez-Antigüedad, Alfredo; García-Merino, Juan A; Comabella, Manuel; Villar, Luisa M; Izquierdo, Guillermo; Tintoré, Mar; Oreja-Guevara, Celia; Álvarez-Cermeño, José C; Meca-Lallana, José E; Prieto, José M; Ramió-Torrentà, Lluís; Martínez-Yélamos, Sergio; Montalban, Xavier

    2013-04-01

    Multiple sclerosis is the most frequent disabling neurological disease in young adults. Its development includes independent processes of inflammation, demyelination, neurodegeneration, gliosis and repair, which are responsible for the heterogeneity and individual variability in the expression of the disease, its prognosis and response to treatment. As part of personalised medicine, the progress made in the search for new biomarkers has identified promising candidates that may be useful for the early diagnosis of the disease, for detecting prognostic and developmental profiles of the disease, and for monitoring the response to treatment. Unfortunately, few of them have been validated adequately, which prevents them from being applied in clinical practice. In view of the latest findings, the experts recommend orienting research in another direction, not so much towards the discovery of new molecules or imaging techniques, but instead towards a clinical validation of these markers, with the aim of fostering translational research. This review offers an update on the information about the biomarkers in multiple sclerosis that have currently been validated and are thus potential candidates, as well as looking at their value in the diagnosis, prognosis, evaluation of the development of the disability caused by the disease and the response to therapy.

  18. Comparison of volatile components of flower, leaf, peel and juice of ...

    African Journals Online (AJOL)

    Then, they were all analyzed by GC-FID and GC-MS. 37 flower components, 53 leaf components, 54 peel components and 47 juice components including: aldehydes, alcohols, esters, ketones, monoterpenes, sesquiterpenes and other components were identified and quantified. The major flavor components were linalool, ...

  19. Passive neutron-multiplication measurements

    International Nuclear Information System (INIS)

    Zolnay, A.S.; Barnett, C.S.; Spracklen, H.P.

    1982-01-01

    We have developed an instrument to measure neutron multiplication by statistical analysis of the timing of neutrons emitted from fissionable material. This instrument is capable of repeated analysis of the same recorded data with selected algorithms, graphical displays showing statistical properties of the data, and preservation of raw data on disk for future comparisons. In our measurements we have made a comparison of the covariance to mean and Feynman variance to mean analysis algorithms to show that the covariance avoids a bias term and measures directly the effect due to the presence of neutron chains. A spherical assembly of enriched uranium shells and acrylic resin reflector/moderator components used for the measurements is described. Preliminary experimental results of the Feynman variance to mean measurements show the expected correlation with assembly multiplication

  20. Statistics of Shared Components in Complex Component Systems

    Science.gov (United States)

    Mazzolini, Andrea; Gherardi, Marco; Caselle, Michele; Cosentino Lagomarsino, Marco; Osella, Matteo

    2018-04-01

    Many complex systems are modular. Such systems can be represented as "component systems," i.e., sets of elementary components, such as LEGO bricks in LEGO sets. The bricks found in a LEGO set reflect a target architecture, which can be built following a set-specific list of instructions. In other component systems, instead, the underlying functional design and constraints are not obvious a priori, and their detection is often a challenge of both scientific and practical importance, requiring a clear understanding of component statistics. Importantly, some quantitative invariants appear to be common to many component systems, most notably a common broad distribution of component abundances, which often resembles the well-known Zipf's law. Such "laws" affect in a general and nontrivial way the component statistics, potentially hindering the identification of system-specific functional constraints or generative processes. Here, we specifically focus on the statistics of shared components, i.e., the distribution of the number of components shared by different system realizations, such as the common bricks found in different LEGO sets. To account for the effects of component heterogeneity, we consider a simple null model, which builds system realizations by random draws from a universe of possible components. Under general assumptions on abundance heterogeneity, we provide analytical estimates of component occurrence, which quantify exhaustively the statistics of shared components. Surprisingly, this simple null model can positively explain important features of empirical component-occurrence distributions obtained from large-scale data on bacterial genomes, LEGO sets, and book chapters. Specific architectural features and functional constraints can be detected from occurrence patterns as deviations from these null predictions, as we show for the illustrative case of the "core" genome in bacteria.

  1. Improved Joining of Metal Components to Composite Structures

    Science.gov (United States)

    Semmes, Edmund

    2009-01-01

    Systems requirements for complex spacecraft drive design requirements that lead to structures, components, and/or enclosures of a multi-material and multifunctional design. The varying physical properties of aluminum, tungsten, Invar, or other high-grade aerospace metals when utilized in conjunction with lightweight composites multiply system level solutions. These multi-material designs are largely dependent upon effective joining techAn improved method of joining metal components to matrix/fiber composite material structures has been invented. The method is particularly applicable to equipping such thin-wall polymer-matrix composite (PMC) structures as tanks with flanges, ceramic matrix composite (CMC) liners for high heat engine nozzles, and other metallic-to-composite attachments. The method is oriented toward new architectures and distributing mechanical loads as widely as possible in the vicinities of attachment locations to prevent excessive concentrations of stresses that could give rise to delaminations, debonds, leaks, and other failures. The method in its most basic form can be summarized as follows: A metal component is to be joined to a designated attachment area on a composite-material structure. In preparation for joining, the metal component is fabricated to include multiple studs projecting from the aforementioned face. Also in preparation for joining, holes just wide enough to accept the studs are molded into, drilled, or otherwise formed in the corresponding locations in the designated attachment area of the uncured ("wet') composite structure. The metal component is brought together with the uncured composite structure so that the studs become firmly seated in the holes, thereby causing the composite material to become intertwined with the metal component in the joining area. Alternately, it is proposed to utilize other mechanical attachment schemes whereby the uncured composite and metallic parts are joined with "z-direction" fasteners. The

  2. Components of Burden: Interventive Implications.

    Science.gov (United States)

    Kosberg, Jordan I.; And Others

    1990-01-01

    Studied 127 informal caregivers of Alzheimer's disease patients to determine correlates of 5 components of burden as measured by Cost of Care Index. Significant relationships between predictor variables and burden components suggest that global scores and measures of burden do not identify specific problem areas relative to various components of…

  3. Jet Stability and the Generation of Superluminal and Stationary Components

    Science.gov (United States)

    Agudo, Ivan; Gomez, Jose-Luis; Marti, Jose-Maria; Ibanez, Jose-Maria; Marscher, Alan P.; Alberdi, Antonio; Aloy, Miguel-Angel; Hardee, Philip E.

    2001-01-01

    We present a numerical simulation of the response of an expanding relativistic jet to the ejection of a superluminal component. The simulation has been performed with a relativistic time-dependent hydrodynamical code from which simulated radio maps are computed by integrating the transfer equations for synchrotron radiation. The interaction of the superluminal component with the underlying jet results in the formation of multiple conical shocks behind the main perturbation. These trailing components can be easily distinguished because they appear to be released from the primary superluminal component instead of being ejected from the core. Their oblique nature should also result in distinct polarization properties. Those appearing closer to the core show small apparent motions and a very slow secular decrease in brightness and could be identified as stationary components. Those appearing farther downstream are weaker and can reach superluminal apparent motions. The existence of these trailing components indicates that not all observed components necessarily represent major perturbations at the jet inlet; rather, multiple emission components can be generated by a single disturbance in the jet. While the superluminal component associated with the primary perturbation exhibits a rather stable pattern speed, trailing components have velocities that increase with distance from the core but move at less than the jet speed. The trailing components exhibit motion and structure consistent with the triggering of pinch modes by the superluminal component. The increase in velocity of the trailing components is an indirect consequence of the acceleration of the expanding fluid, which is assumed to be relativistically hot; if observed, such accelerations would therefore favor an electron-positron (as opposed to proton rest mass) dominated jet.

  4. INDIA: Photon multiplicity detector

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    Full text: The team of Indian scientists from Calcutta's Variable Energy Cyclotron Centre, Bhubaneswar Institute of Physics, Panjab (Chandigarh), Rajasthan (Jaipur) and Jammu in collaboration with GSI Darmstadt have contributed a large and highly granular preshower photon multiplicity detector (PMD) for the WA98 experiment at the CERN SPS proton synchrotron. This experiment studies high energy collisions of lead ions and will measure both charged particle and photon multiplicity in a large overlap region. The motivation for measuring photon multiplicity in ultra-relativistic heavy ion collisions stems from theoretical predictions of changes in the relative production of photons and charged particles in the phase transition of hadronic matter to quarkgluon plasma and its subsequent hadronization. The photon multiplicity detector consists of a matrix of scintillator pads placed in light-tight boxes and mounted behind the lead converter plates. The light from the scintillator pads is transported to the readout system using wavelength shifting (WLS) fibres. Developing on the team's earlier experience with a smaller version for the WA93 experiment (September 1991, page 16), several modifications were incorporated to improve light collection and transport. Use of improved WLS fibres, short WLS pieces to minimize self-absorption, and thermal splicing with long clear fibres were some of the important changes incorporated. Tests showed signficantly improved light collection. The scintillator pads were fabricated at all the five collaborating centres in India and the complicated assembly in the detector box modules carried out at the Variable Energy Cyclotron Centre, Calcutta. More than 400 lead converter plates were machined in Calcutta to rigorous tolerances of 0.2 mm. The assembled detector box modules and lead plates were shipped to CERN in spring 1994 for tests and installation. The WA98 PMD consists of over 50,000 scintillator pads of sizes varying from 15 to

  5. Multiple intratesticular cysts.

    Science.gov (United States)

    Kang, Sung Min; Hwang, Dae Sung; Lee, Jung Woo; Chon, Won Hee; Park, Nam Cheol; Park, Hyun Jun

    2013-04-01

    Intratesticular cysts, once thought to be a rarity, are now being reported with an increasing prevalence as a result of the wider use of scrotal ultrasound scanning. Despite greater understanding of intratesticular cysts, their management remains unclear. Treatment has included enucleation and even radical orchiectomy over fear of the possibility of an associated malignancy. A more conservative approach with serial ultrasound scanning has been advocated if a clear distinction can be made between neoplastic and non-neoplastic testicular cysts. However, in view of the benign nature of such cysts, even repeated ultrasound scanning may not be necessary and may be considered over-treatment. In this study we present clinical and morphological characteristics of multiple cysts in the right testicle in a 62-year-old patient, where a slightly nodular lesion in the right testicle was detected.

  6. GMES Space Component: Programme overview

    Science.gov (United States)

    Aschbacher, J.; Milagro-Perez, M. P.

    2012-04-01

    The European Union (EU) and the European Space Agency (ESA) have developed the Global Monitoring for Environment and Security (GMES) programme as Europe's answer to the vital need for joined-up data about our climate, environment and security. Through a unique combination of satellite, atmospheric and Earth-based monitoring systems, the initiative will provide new insight into the state of the land, sea and air, providing policymakers, scientists, businesses and the public with accurate and timely information. GMES capabilities include monitoring and forecasting of climatic change, flood risks, soil and coastal erosion, crop and fish resources, air pollution, greenhouse gases, iceberg distribution and snow cover, among others. To accomplish this, GMES has been divided into three main components: Space, In-situ and Services. The Space Component, led by ESA, comprises five types of new satellites called Sentinels that are being developed by ESA specifically to meet the needs of GMES, the first of which to be launched in 2013. These missions carry a range of technologies, such as radar and multi-spectral imaging instruments for land, ocean and atmospheric monitoring. In addition, access to data from the so-called Contributing Missions guarantees that European space infrastructure is fully used for GMES. An integrated Ground Segment ensures access to Sentinels and Contributing Missions data. The in-situ component, under the coordination of the European Environment Agency (EEA), is composed of atmospheric and Earth based monitoring systems, and based on established networks and programmes at European and international levels. The European Commission is in charge of implementing the services component of GMES and of leading GMES overall. GMES services, fed with data from the Space and In-situ components, will provide essential information in five main domains, atmosphere, ocean and land monitoring as well as emergency response and security. Climate change has been added

  7. Unblockable Compositions of Software Components

    DEFF Research Database (Denmark)

    Dong, Ruzhen; Faber, Johannes; Liu, Zhiming

    2012-01-01

    . To this end, we develop an algorithm to compute the unblockable interaction behavior, called the interface model of a component, from its execution model. Based on this model, we introduce composition operators for the components and prove important compositionality results, showing the conditions under which......We present a new automata-based interface model describing the interaction behavior of software components. Contrary to earlier component- or interface-based approaches, the interface model we propose specifies all the non-blockable interaction behaviors of a component with any environment...

  8. Shaking table qualification tests of mechanical and electrical components

    International Nuclear Information System (INIS)

    Jurukovski, D.

    1993-01-01

    This presentation covers the experience of the Institute of Earthquake Engineering and Engineering Seismology, Skopje, Republic of Macedonia in seismic qualification of mechanical components by shaking table testing. The characteristics of the biaxial seismic and single component shaking tables used at the Institute are given. Some examples of the experience from performed test for reactor components are included

  9. 21 CFR 890.3420 - External limb prosthetic component.

    Science.gov (United States)

    2010-04-01

    ... total prosthesis. Examples of external limb prosthetic components include the following: Ankle, foot, hip, knee, and socket components; mechanical or powered hand, hook, wrist unit, elbow joint, and shoulder joint components; and cable and prosthesis suction valves. (b) Classification. Class I (general...

  10. Dual phase magnetic material component and method of forming

    Science.gov (United States)

    Dial, Laura Cerully; DiDomizio, Richard; Johnson, Francis

    2017-04-25

    A magnetic component having intermixed first and second regions, and a method of preparing that magnetic component are disclosed. The first region includes a magnetic phase and the second region includes a non-magnetic phase. The method includes mechanically masking pre-selected sections of a surface portion of the component by using a nitrogen stop-off material and heat-treating the component in a nitrogen-rich atmosphere at a temperature greater than about 900.degree. C. Both the first and second regions are substantially free of carbon, or contain only limited amounts of carbon; and the second region includes greater than about 0.1 weight % of nitrogen.

  11. Domestic Violence - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Domestic Violence URL of this page: https://medlineplus.gov/languages/ ... V W XYZ List of All Topics All Domestic Violence - Multiple Languages To use the sharing features on ...

  12. ALICE Forward Multiplicity Detector

    CERN Multimedia

    Christensen, C

    2013-01-01

    The Forward Multiplicity Detector (FMD) extends the coverage for multiplicity of charge particles into the forward regions - giving ALICE the widest coverage of the 4 LHC experiments for these measurements.

  13. Health Literacy - Multiple Languages

    Science.gov (United States)

    ... Here: Home → Multiple Languages → All Health Topics → Health Literacy URL of this page: https://medlineplus.gov/languages/ ... W XYZ List of All Topics All Health Literacy - Multiple Languages To use the sharing features on ...

  14. Postpartum Depression - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Postpartum Depression URL of this page: https://medlineplus.gov/languages/ ... V W XYZ List of All Topics All Postpartum Depression - Multiple Languages To use the sharing features on ...

  15. Dual Diagnosis - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Dual Diagnosis URL of this page: https://medlineplus.gov/ ... V W XYZ List of All Topics All Dual Diagnosis - Multiple Languages To use the sharing features ...

  16. Zika Virus - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Zika Virus URL of this page: https://medlineplus.gov/languages/ ... V W XYZ List of All Topics All Zika Virus - Multiple Languages To use the sharing features on ...

  17. Cesarean Section - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Cesarean Section URL of this page: https://medlineplus.gov/languages/ ... V W XYZ List of All Topics All Cesarean Section - Multiple Languages To use the sharing features on ...

  18. Child Abuse - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Child Abuse URL of this page: https://medlineplus.gov/languages/ ... V W XYZ List of All Topics All Child Abuse - Multiple Languages To use the sharing features on ...

  19. Salmonella Infections - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Salmonella Infections URL of this page: https://medlineplus.gov/ ... V W XYZ List of All Topics All Salmonella Infections - Multiple Languages To use the sharing features ...

  20. Panic Disorder - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Panic Disorder URL of this page: https://medlineplus.gov/languages/ ... V W XYZ List of All Topics All Panic Disorder - Multiple Languages To use the sharing features on ...