Radiation and nuclear safety included in the environmental health programme

International Nuclear Information System (INIS)

Salomaa, S.

1996-01-01

Finland is currently preparing a national environmental health programme, the objective of which is to chart the main environmental health problems in Finland, to identify means for securing a healthy environment, and to draw up a practical action programme for preventing and rectifying problems pertaining to environmental health. Radiation and nuclear safety form an essential part of preventive health care. The action programme is based on decisions and programmes approved at the WHO Conference on the Environment and Health, held in Helsinki in June 1994. In addition to the state of the Finnish environment and the health of the Finnish population, the programme addresses the relevant international issues, in particular in areas adjacent to Finland. The Committee on Environmental Health is expected to complete its work by the end of the year. A wide range of representatives from various branches of administration have contributed to the preparation of the programme. Besides physical, biological and chemical factors, the environmental factors affecting health also include the physical environment and the psychological, social and aesthetic features of the environment. Similarly, environmental factors that have an impact on the health of present or future generations, on the essential preconditions of life and on the quality of life are investigated. The serious risk to nature caused by human actions is also considered as a potential risk to human health. (orig.)

Exergetic and environmental analysis of a pulverized coal power plant

International Nuclear Information System (INIS)

Restrepo, Álvaro; Miyake, Raphael; Kleveston, Fábio; Bazzo, Edson

2012-01-01

This paper presents the results of exergetic and environmental analysis of a typical pulverized coal power plant located in Brazil. The goal was to quantify both the exergy destruction and the environmental impact associated with a thermal power plant. The problem boundary consists of the entire coal delivery route, including mining and beneficiation, transport, pre-burning processes and the power plant. The used data were obtained mainly from field measurements taken in all system processes, from mining to the power plant. The study focused only on the operation period. Previous works have shown that the construction and decommissioning periods contribute less than 1% of the environmental impact. The exergetic analysis was based on the second law of thermodynamics while the environmental analysis was based on life cycle assessment (LCA) using SimaPro 7.2, focussing on the climate change and acidification impact categories. The CO 2 -eq emission was 1300 kg per MWh. The highest degree of environmental impact occurred during the combustion process. The exergetic and environmental analysis provides a tool to evaluate irreversibilities and the environmental impact, identifying the most significant stages and equipment of the entire power generation process. -- Highlights: ► Exergetic and environmental analysis of a typical Brazilian PC power plant. ► Environmental impact associated with the mining, transport and thermal power plant. ► Life cycle assessment used for environmental analysis. ► Acidification impact category evaluated using Eco-indicator 99. ► Climate change impact evaluation using (Global Warming Potential) GWP 100a.

Application of Environmental Input-Output Analysis for Corporate and Product Environmental Footprints—Learnings from Three Cases

Directory of Open Access Journals (Sweden)

Louise Laumann Kjaer

2015-08-01

Full Text Available An increasing number of companies are expanding their environmental impact reduction targets and strategies to include their supply chains or whole product life cycles. In this paper, we demonstrate and evaluate an approach, where we used a hybrid Environmental Input-Output (EIO database as a basis for corporate and product environmental footprint accounts, including the entire supply chain. We present three cases, where this approach was applied. Case study 1 describes the creation of total corporate carbon footprint accounts for three Danish regional healthcare organisations. In case study 2, the approach was used as basis for an Environmental Profit and Loss account for the healthcare company, Novo Nordisk A/S. Case study 3 used the approach for life cycle assessment of a tanker ship. We conclude that EIO-based analyses offer a holistic view of environmental performance, provide a foundation for decision-making within reasonable time and cost, and for companies with a large upstream environmental footprint, the analysis supports advancing their sustainability agenda to include supply chain impacts. However, there are implications when going from screening to implementing the results, including how to measure and monitor the effect of the different actions. Thus, future research should include more detailed models to support decision-making.

Environmental analysis report : Becancour cogeneration power station by TransCanada Energy Ltd

International Nuclear Information System (INIS)

Gagnon, D.; Theberge, M.C.

2004-01-01

This report presents an environmental analysis of TransCanada Energy's proposed project to construct the Becancour cogeneration power station fuelled by natural gas. The realization of this project requires the delivery of a certificate of authorization by the Quebec government. One requirement to obtain this certificate is the completion of an environmental impact study. This report first presents the purpose and general description of the project. It includes an environmental analysis of the issues and impacts associated with the project including environmental problems associated with greenhouse gas emissions. The conclusion and the recommendations for the conditions of the project are presented thereafter. The report concludes that the environmental impacts resulting from the realization of the power station are very few and include atmospheric emissions, vapors, noise, rejections liquid and technological risks. Suitable abatement measures and selected technology make it possible to control these impacts. 8 refs., 2 figs., 3 appendices

Environmental cost/benefit analysis for fusion power plants

International Nuclear Information System (INIS)

Young, J.R.

1976-11-01

This document presents a cost/benefit analysis of use of fusion power plants early in the 21st century. The first section describes the general formulation of the analysis. Included are the selection of the alternatives to the fusion reactor, selection of the power system cases to be compared, and a general comparison of the environmental effects of the selected alternatives. The second section compares the cumulative environmental effects from 2010 to 2040 for the primary cases of the power system with and without fusion reactors. The third section briefly illustrates the potential economic benefits if fusion reactors produce electricity at a lower unit cost than LMFBRs can. The fourth section summarizes the cost/benefit analysis

Integrating indicators in a national accounting matrix including environmental accounts (NAMEA)

International Nuclear Information System (INIS)

De Haan, M.; Keuning, S.J.; Bosch, P.R.

1993-01-01

Five environmental indicators are conceptually and numerically integrated into a National Accounting Matrix including Environmental Accounts (NAMEA) for 1989. As a consequence, these estimates are directly comparable with outcomes of major macro-economic aggregates in the conventional accounts. In the NAMEA, emissions of all kinds of polluting agents are recorded by industry and by consumption purpose. Subsequently, these agents are grouped into five environmental themes: greenhouse effect, ozone layer depletion, acidification, eutrophication and waste accumulation. The contributions of agents to certain themes are expressed in theme-related environmental stress equivalents. Per theme, these stress equivalents are confronted with policy norms set by the Netherlands government for the year 2000. This results in a statistical framework at a meso-level from which integrated economic and environmental indicators are derived. The NAMEA may also serve as a data base and analytical device for modelling interactions between the national economy and changes in the environment. 13 tabs., 2 app., 32 refs

Qualitative environmental health research: an analysis of the literature, 1991-2008.

Science.gov (United States)

Scammell, Madeleine Kangsen

2011-10-01

Qualitative research uses nonnumeric data to understand people's opinions, motives, understanding, and beliefs about events or phenomena. In this analysis, I report the use of qualitative methods and data in the study of the relationship between environmental exposures and human health. A primary search for peer-reviewed journal articles dated from 1991 through 2008 included the following three terms: qualitative, environ*, and health. Searches resulted in 3,155 records. Data were extracted and findings of articles analyzed to determine where and by whom qualitative environmental health research is conducted and published, the types of methods and analyses used in qualitative studies of environmental health, and the types of information qualitative data contribute to environmental health. The results highlight a diversity of disciplines and techniques among researchers who used qualitative methods to study environmental health. Nearly all of the studies identified increased scientific understanding of lay perceptions of environmental health exposures. This analysis demonstrates the potential of qualitative data to improve understanding of complex exposure pathways, including the influence of social factors on environmental health, and health outcomes.

Applying AI tools to operational space environmental analysis

Science.gov (United States)

Krajnak, Mike; Jesse, Lisa; Mucks, John

1995-01-01

The U.S. Air Force and National Oceanic Atmospheric Agency (NOAA) space environmental operations centers are facing increasingly complex challenges meeting the needs of their growing user community. These centers provide current space environmental information and short term forecasts of geomagnetic activity. Recent advances in modeling and data access have provided sophisticated tools for making accurate and timely forecasts, but have introduced new problems associated with handling and analyzing large quantities of complex data. AI (Artificial Intelligence) techniques have been considered as potential solutions to some of these problems. Fielding AI systems has proven more difficult than expected, in part because of operational constraints. Using systems which have been demonstrated successfully in the operational environment will provide a basis for a useful data fusion and analysis capability. Our approach uses a general purpose AI system already in operational use within the military intelligence community, called the Temporal Analysis System (TAS). TAS is an operational suite of tools supporting data processing, data visualization, historical analysis, situation assessment and predictive analysis. TAS includes expert system tools to analyze incoming events for indications of particular situations and predicts future activity. The expert system operates on a knowledge base of temporal patterns encoded using a knowledge representation called Temporal Transition Models (TTM's) and an event database maintained by the other TAS tools. The system also includes a robust knowledge acquisition and maintenance tool for creating TTM's using a graphical specification language. The ability to manipulate TTM's in a graphical format gives non-computer specialists an intuitive way of accessing and editing the knowledge base. To support space environmental analyses, we used TAS's ability to define domain specific event analysis abstractions. The prototype system defines

Environmental analysis of higher brominated diphenyl ethers and decabromodiphenyl ethane.

Science.gov (United States)

Kierkegaard, Amelie; Sellström, Ulla; McLachlan, Michael S

2009-01-16

Methods for environmental analysis of higher brominated diphenyl ethers (PBDEs), in particular decabromodiphenyl ether (BDE209), and the recently discovered environmental contaminant decabromodiphenyl ethane (deBDethane) are reviewed. The extensive literature on analysis of BDE209 has identified several critical issues, including contamination of the sample, degradation of the analyte during sample preparation and GC analysis, and the selection of appropriate detection methods and surrogate standards. The limited experience with the analysis of deBDethane suggests that there are many commonalities with BDE209. The experience garnered from the analysis of BDE209 over the last 15 years will greatly facilitate progress in the analysis of deBDethane.

Environmental risk analysis

International Nuclear Information System (INIS)

Lima-e-Silva, Pedro Paulo de

1996-01-01

The conventional Risk Analysis (RA) relates usually a certain undesired event frequency with its consequences. Such technique is used nowadays in Brazil to analyze accidents and their consequences strictly under the human approach, valuing loss of human equipment, human structures and human lives, without considering the damage caused to natural resources that keep life possible on Earth. This paradigm was developed primarily because of the Homo sapiens' lack of perception upon the natural web needed to sustain his own life. In reality, the Brazilian professionals responsible today for licensing, auditing and inspecting environmental aspects of human activities face huge difficulties in making technical specifications and procedures leading to acceptable levels of impact, furthermore considering the intrinsic difficulties to define those levels. Therefore, in Brazil the RA technique is a weak tool for licensing for many reasons, and of them are its short scope (only accident considerations) and wrong a paradigm (only human direct damages). A paper from the author about the former was already proposed to the 7th International Conference on Environmetrics, past July'96, USP-SP. This one discusses the extension of the risk analysis concept to take into account environmental consequences, transforming the conventional analysis into a broader methodology named here as Environmental Risk Analysis. (author)

Environmental assessment of passenger transportation should include infrastructure and supply chains

International Nuclear Information System (INIS)

Chester, Mikhail V; Horvath, Arpad

2009-01-01

To appropriately mitigate environmental impacts from transportation, it is necessary for decision makers to consider the life-cycle energy use and emissions. Most current decision-making relies on analysis at the tailpipe, ignoring vehicle production, infrastructure provision, and fuel production required for support. We present results of a comprehensive life-cycle energy, greenhouse gas emissions, and selected criteria air pollutant emissions inventory for automobiles, buses, trains, and airplanes in the US, including vehicles, infrastructure, fuel production, and supply chains. We find that total life-cycle energy inputs and greenhouse gas emissions contribute an additional 63% for onroad, 155% for rail, and 31% for air systems over vehicle tailpipe operation. Inventorying criteria air pollutants shows that vehicle non-operational components often dominate total emissions. Life-cycle criteria air pollutant emissions are between 1.1 and 800 times larger than vehicle operation. Ranges in passenger occupancy can easily change the relative performance of modes.

Environmental pressures from European consumption and production. A study in integrated environmental and economic analysis

Energy Technology Data Exchange (ETDEWEB)

Watson, D. [Copenhagen Resource Institute, Copenhagen (Denmark); Fernandez, J.A.; Wittmer, D. [Wuppertal Institute, Wuppertal (Germany); Gravgaerd Pedersen, O. [Statistics Denmark, Copenhagen (Denmark); European Topic Centre on Sustainable Consumption and Production, Copenhagen (Denmark)

2013-03-15

Environmental pressures from European consumption and production shows how economic and environmental data can be integrated to analyse environmental performance and material efficiency of whole economies as well as their individual elements. The analyses presented in the report provide policy makers with a tool to target economic incentives and information campaigns, encouraging a shift to more sustainable production and consumption patterns in order to reduce Europe's global footprint. The report discusses two analytical approaches. The production-based method considers direct environmental pressures caused by European industries and service providers - for example, the extraction of material resources by the mining and quarrying sector, air pollutants from power stations, greenhouse gas emissions from agriculture and so on. The consumption-based method focuses on the indirect environmental pressures caused by European consumers. In this approach, the direct production-related pressures are attributed to broad groups of products and services, also taking into account pressures that are embodied in goods imported into the EU. Using Environmentally Extended Input Output Analysis (EE-IOA) it is possible to estimate the environmental pressures ultimately generated by individual product groups and also by European consumption as a whole. Four types of environmental pressures are considered by the report: raw material use, greenhouse gas emissions, acidifying air emissions, and air pollutants leading to harmful ground-level ozone. However, the method has the potential to assess many other types of environmental pressure including land use, water use, waste generation and energy use. Thanks to the conceptual consistency between the system of national economic accounts and environmental accounts, data on environmental pressures is directly comparable to economic expenditure. Policy makers can thus see which sectors have been most successful in decoupling

A study on the environmental impacts analysis with life cycle analysis of NPPs

International Nuclear Information System (INIS)

Jeong, H. S.; Moon, K. H.; Youn, S. W.

2003-01-01

This Life Cycle Analysis (LCA) work was accomplished based on the ISO-14040 framework goal and scope definition, including life cycle inventory analysis, and life cycle impact assessment. For the selection of impact categories, resource use, global affairs, local affairs, and nuclear specific affair were considered. It was unexpected that environmental burdens are generally heavier in an electricity generation process than in upper stream and fabrication processes, except ODP and ETPs. It has been normally thought that environmental burden in upper steam would be heavier than those in other processes. This misconception could have originated from the ambiguous thought for end-of-pipe emissions and life cycle inventories

Environmental management strategy: four forces analysis.

Science.gov (United States)

Doyle, Martin W; Von Windheim, Jesko

2015-01-01

We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

Environmental Management Strategy: Four Forces Analysis

Science.gov (United States)

Doyle, Martin W.; Von Windheim, Jesko

2015-01-01

We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

A fatigue analysis including environmental effects for a pipe system in a Swedish BWR

International Nuclear Information System (INIS)

Steingrimsdottir, Kristin; Dahlberg, Magnus

2011-10-01

A BWR feed water piping system (austenitic steel) has been analyzed with two different fatigue curves and environmental factors. Original fatigue curve from ASME is compared to a new fatigue curve; ANL. The influence of environmental correction factors (Fen) is studied further for the piping system. It is noted that the results apply for this particular system, and general conclusions should be cautiously drawn. Typical for this system is that all dominant loads are within the low-cycle regime. This implies that the change of fatigue curve only leads to limited increases in usage factors. Larger changes can occur if larger number of cycles is within the high-cycle regime

New trends in sample preparation techniques for environmental analysis.

Science.gov (United States)

Ribeiro, Cláudia; Ribeiro, Ana Rita; Maia, Alexandra S; Gonçalves, Virgínia M F; Tiritan, Maria Elizabeth

2014-01-01

Environmental samples include a wide variety of complex matrices, with low concentrations of analytes and presence of several interferences. Sample preparation is a critical step and the main source of uncertainties in the analysis of environmental samples, and it is usually laborious, high cost, time consuming, and polluting. In this context, there is increasing interest in developing faster, cost-effective, and environmentally friendly sample preparation techniques. Recently, new methods have been developed and optimized in order to miniaturize extraction steps, to reduce solvent consumption or become solventless, and to automate systems. This review attempts to present an overview of the fundamentals, procedure, and application of the most recently developed sample preparation techniques for the extraction, cleanup, and concentration of organic pollutants from environmental samples. These techniques include: solid phase microextraction, on-line solid phase extraction, microextraction by packed sorbent, dispersive liquid-liquid microextraction, and QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe).

Environmental Performance in Countries Worldwide: Determinant Factors and Multivariate Analysis

Directory of Open Access Journals (Sweden)

Isabel Gallego-Alvarez

2014-11-01

Full Text Available The aim of this study is to analyze the environmental performance of countries and the variables that can influence it. At the same time, we performed a multivariate analysis using the HJ-biplot, an exploratory method that looks for hidden patterns in the data, obtained from the usual singular value decomposition (SVD of the data matrix, to contextualize the countries grouped by geographical areas and the variables relating to environmental indicators included in the environmental performance index. The sample used comprises 149 countries of different geographic areas. The findings obtained from the empirical analysis emphasize that socioeconomic factors, such as economic wealth and education, as well as institutional factors represented by the style of public administration, in particular control of corruption, are determinant factors of environmental performance in the countries analyzed. In contrast, no effect on environmental performance was found for factors relating to the internal characteristics of a country or political factors.

Occupational and environmental scleroderma. Systematic review and meta-analysis.

Science.gov (United States)

Rubio-Rivas, Manuel; Moreno, Rafael; Corbella, Xavier

2017-03-01

The etiology of systemic sclerosis (SSc) remains unknown; however, several occupational and environmental factors have been implicated. Our objective was to perform a meta-analysis of all studies published on SSc associated with occupational and environmental exposure. The review was undertaken by means of MEDLINE and SCOPUS from 1960 to 2014 and using the terms: "systemic," "scleroderma," or "systemic sclerosis/chemically induced" [MesH]. The Newcastle-Ottawa Scale was used for the qualifying assessment. The inverse variance-weighted method was performed. The meta-analysis of silica exposure included 15 case-control studies [overall OR 2.81 (95%CI 1.86-4.23; p < 0.001)] and 4 cohort studies [overall RR 17.52 (95%CI 5.98-51.37; p < 0.001)]; the meta-analysis of solvents exposure included 13 case-control studies (overall OR 2.00 [95%CI 1.32-3.02; p = 0.001); the meta-analysis of breast implants exposure included 4 case-control studies (overall OR 1.68 (95%CI 1.65-1.71; p < 0.001)) and 6 cohort studies (overall RR 2.13 (95%CI 0.86-5.27; p = 0.10)); the meta-analysis of epoxy resins exposure included 4 case-control studies (overall OR 2.97 (95%CI 2.31-3.83; p < 0.001)), the meta-analysis of pesticides exposure included 3 case-control studies (overall OR 1.02 (95%CI 0.78-1.32; p = 0.90)) and, finally, the meta-analysis of welding fumes exposure included 4 studies (overall OR 1.29 (95%CI 0.44-3.74; p = 0.64)). Not enough studies citing risks related to hair dyes have been published to perform an accurate meta-analysis. Silica and solvents were the two most likely substances related to the pathogenesis of SSc. While silica is involved in particular jobs, solvents are widespread and more people are at risk of having incidental contact with them.

NASA's Agency-Wide Strategy for Environmental Regulatory Risk Analysis and Communication

Science.gov (United States)

Scroggins, Sharon; Duda, Kristen

2008-01-01

This viewgraph presentation gives an overview of NASA's risk analysis communication programs associated with changing environmental policies. The topics include: 1) NASA Program Transition; 2) Principal Center for Regulatory Risk Analysis and Communication (RRAC PC); and 3) Regulatory Tracking and Communication Process.

Risk analysis and priority setting for environmental policy

International Nuclear Information System (INIS)

Travis, C.C.

1991-01-01

There is a growing realization that the demand for funding to correct our nation's environmental problems will soon outstrip available resources. In the hazardous waste area alone, the estimated cost of remediating Superfund sites ranges from $32 billion to $80 billion. Numerous other areas of competing for these same financial resources. These include ozone depletion, global warming, the protection of endangered species and wetlands, toxic air pollution, carcinogenic pesticides, and urban smog. In response to this imbalance in the supply and demand for national funds, several political constituencies are calling for the use of risk assessment as a tool in the prioritization of research and budget needs. Comparative risk analysis offers a logical framework in which to organize information about complex environmental problems. Risk analysis allows policy analysts to make resource allocation decisions on the basis of scientific judgement rather than political expediency

Full spectrum analysis in environmental monitoring

International Nuclear Information System (INIS)

Reinhardt, Sascha; Hartmann, Soeren; Pimpl, Richard

2015-01-01

In the environmental monitoring spectroscopic gamma detectors are frequently used. The motivation to use spectroscopic gamma detectors is the higher sensitivity and specific spectral information. For the analysis often the photo peaks of the gamma spectrum are used to identify the nuclide. These methods are very reliable, robust and well developed but using only the photo peak means also to use only a fraction of the available information. Doing a full spectrum analysis based on principle components obtained from NASVD for description of the radiation background and adjustment calculations are a possible analysis method which may provide advantages compared to a peak based analysis when used for a continuous environmental monitoring. An analysis example is shown and discussed with a measured time series of gamma spectra obtained from a spectroscopic gamma detector SARA IGS710 with a NaI(Tl) scintillator as it is used in the environmental monitoring.

Full spectrum analysis in environmental monitoring

International Nuclear Information System (INIS)

Reinahrdt, S.; Hartmann, S.; Pimpl, R.

2014-01-01

In the environmental monitoring spectroscopic gamma detectors are frequently used. The motivation to use spectroscopic gamma detectors is the higher sensitivity and specific spectral information. For the analysis often the photo peaks of the gamma spectrum are used to identify the nuclide. These methods are very reliable, robust and well developed but using only the photo peak means also to use only a fraction of the available information. Doing a full spectrum analysis based on principal components obtained from NASVD for description of the radiation background and adjustment calculations are a possible analysis method, which may provide advantages compared to a peak based analysis when used for a continuous environmental monitoring. An analysis example is shown and discussed with a measured time series of gamma spectra obtained from a spectroscopic gamma detector SARA IGS710 with a NaI(Tl) scintillator as it is used in the environmental monitoring. (authors)

Qualitative environmental health research: an analysis of the literature, 1991-2008.

Science.gov (United States)

Scammell, Madeleine Kangsen

2010-08-01

Recent articles have advocated for the use of qualitative methods in environmental health research. Qualitative research uses nonnumeric data to understand people's opinions, motives, understanding, and beliefs about events or phenomena. In this analysis of the literature, I report the use of qualitative methods and data in the study of the relationship between environmental exposures and human health. A primary search on ISI Web of Knowledge/Web of Science for peer-reviewed journal articles dated from 1991 through 2008 included the following three terms: qualitative, environ*, and health. Inclusion and exclusion criteria are described. Searches resulted in 3,155 records. Data were extracted and findings of articles analyzed to determine where and by whom qualitative environmental health research is conducted and published, the types of methods and analyses used in qualitative studies of environmental health, and the types of information qualitative data contribute to environmental health. Ninety-one articles met inclusion criteria. These articles were published in 58 different journals, with a maximum of eight for a single journal. The results highlight a diversity of disciplines and techniques among researchers who used qualitative methods to study environmental health, with most studies relying on one-on-one interviews. Details of the analyses were absent from a large number of studies. Nearly all of the studies identified increased scientific understanding of lay perceptions of environmental health exposures. Qualitative data are published in traditionally quantitative environmental health studies to a limited extent. However, this analysis demonstrates the potential of qualitative data to improve understanding of complex exposure pathways, including the influence of social factors on environmental health, and health outcomes.

BALANCED SCORECARDS EVALUATION MODEL THAT INCLUDES ELEMENTS OF ENVIRONMENTAL MANAGEMENT SYSTEM USING AHP MODEL

Directory of Open Access Journals (Sweden)

Jelena Jovanović

2010-03-01

Full Text Available The research is oriented on improvement of environmental management system (EMS using BSC (Balanced Scorecard model that presents strategic model of measurem ents and improvement of organisational performance. The research will present approach of objectives and environmental management me trics involvement (proposed by literature review in conventional BSC in "Ad Barska plovi dba" organisation. Further we will test creation of ECO-BSC model based on business activities of non-profit organisations in order to improve envir onmental management system in parallel with other systems of management. Using this approach we may obtain 4 models of BSC that includ es elements of environmen tal management system for AD "Barska plovidba". Taking into acc ount that implementation and evaluation need long period of time in AD "Barska plovidba", the final choice will be based on 14598 (Information technology - Software product evaluation and ISO 9126 (Software engineering - Product quality using AHP method. Those standards are usually used for evaluation of quality software product and computer programs that serve in organisation as support and factors for development. So, AHP model will be bas ed on evolution criteria based on suggestion of ISO 9126 standards and types of evaluation from two evaluation teams. Members of team & will be experts in BSC and environmental management system that are not em ployed in AD "Barska Plovidba" organisation. The members of team 2 will be managers of AD "Barska Plovidba" organisation (including manage rs from environmental department. Merging results based on previously cr eated two AHP models, one can obtain the most appropriate BSC that includes elements of environmental management system. The chosen model will present at the same time suggestion for approach choice including ecological metrics in conventional BSC model for firm that has at least one ECO strategic orientation.

Conditional Probability Analysis: A Statistical Tool for Environmental Analysis.

Science.gov (United States)

The use and application of environmental conditional probability analysis (CPA) is relatively recent. The first presentation using CPA was made in 2002 at the New England Association of Environmental Biologists Annual Meeting in Newport. Rhode Island. CPA has been used since the...

Analysis of DOE international environmental management activities

Energy Technology Data Exchange (ETDEWEB)

Ragaini, R.C.

1995-09-01

The Department of Energy`s (DOE) Strategic Plan (April 1994) states that DOE`s long-term vision includes world leadership in environmental restoration and waste management activities. The activities of the DOE Office of Environmental Management (EM) can play a key role in DOE`s goals of maintaining U.S. global competitiveness and ensuring the continuation of a world class science and technology community. DOE`s interest in attaining these goals stems partly from its participation in organizations like the Trade Policy Coordinating Committee (TPCC), with its National Environmental Export Promotion Strategy, which seeks to strengthen U.S. competitiveness and the building of public-private partnerships as part of U.S. industrial policy. The International Interactions Field Office task will build a communication network which will facilitate the efficient and effective communication between DOE Headquarters, Field Offices, and contractors. Under this network, Headquarters will provide the Field Offices with information on the Administration`s policies and activities (such as the DOE Strategic Plan), interagency activities, as well as relevant information from other field offices. Lawrence Livermore National Laboratory (LLNL) will, in turn, provide Headquarters with information on various international activities which, when appropriate, will be included in reports to groups like the TPCC and the EM Focus Areas. This task provides for the collection, review, and analysis of information on the more significant international environmental restoration and waste management initiatives and activities which have been used or are being considered at LLNL. Information gathering will focus on efforts and accomplishments in meeting the challenges of providing timely and cost effective cleanup of its environmentally damaged sites and facilities, especially through international technical exchanges and/or the implementation of foreign-development technologies.

Development of an environmental radiation analysis research capability in the UAE

International Nuclear Information System (INIS)

Kim, Sung-yeop; Kim, Chankyu; Lee, Kun Jai; Chang, Soon Heung; Elmasri, Hasna; Beeley, Philip A.

2013-01-01

The UAE has started a nuclear energy program with the aim of having its first four units on-line between 2017 and 2020 and it is important that the country has an environmental radiation analysis capability to support this program. Khalifa University is therefore implementing a research laboratory to support both experimental analysis and radionuclide transport modeling in the aquatic and terrestrial environment. This paper outlines the development of this capability as well as the work in progress and planned for the future. - Highlights: • New university environmental radiation laboratory established in UAE. • Facilities included for alpha, beta and gamma radiometrics. • Transport modeling capability is being established. • Laboratory also used for education and training. • Robotic methods for sampling and analysis are under development

Nuclear analysis techniques and environmental sciences

International Nuclear Information System (INIS)

1997-10-01

31 theses are collected in this book. It introduced molecular activation analysis micro-PIXE and micro-probe analysis, x-ray fluorescence analysis and accelerator mass spectrometry. The applications about these nuclear analysis techniques are presented and reviewed for environmental sciences

Managing the environmental impacts of land transport: integrating environmental analysis with urban planning

International Nuclear Information System (INIS)

Irving, Paul; Moncrieff, Ian

2004-01-01

Ecological systems have limits or thresholds that vary by pollutant type, emissions sources and the sensitivity of a given location. Human health can also indicate sensitivity. Good environmental management requires any problem to be defined to obtain efficient and effective solutions. Cities are where transport activities, effects and resource management decisions are often most focussed. The New Zealand Ministry of Transport has developed two environmental management tools. The Vehicle Fleet Model (VFM) is a predictive database of the environmental performance of the New Zealand traffic fleet (and rail fleet). It calculates indices of local air quality, stormwater, and greenhouse gases emissions. The second is an analytical process based on Environmental Capacity Analysis (ECA). Information on local traffic is combined with environmental performance data from the Vehicle Fleet Model. This can be integrated within a live, geo-spatially defined analysis of the overall environmental effects within a defined local area. Variations in urban form and activity (traffic and other) that contribute to environmental effects can be tracked. This enables analysis of a range of mitigation strategies that may contribute, now or in the future, to maintaining environmental thresholds or meeting targets. A case study of the application of this approach was conducted within Waitakere City. The focus was on improving the understanding of the relative significance of stormwater contaminants derived from land transport

The use of 'macro' legal analysis in the development of global environmental governance

OpenAIRE

Turner, Stephen

2016-01-01

This talk will discuss the challenges that are faced by lawyers in assessing the constituent elements of global environmental governance. It takes into account the different and sometimes disparate approaches that have been taken to the subject and the different interpretations of the term ‘global environmental governance’ itself. It suggests that in the face of such challenges an approach which includes ‘macro’ legal analysis should be developed to ensure that all relevant factors are includ...

Environmental analysis of Ribeiro wine from a timeline perspective: harvest year matters when reporting environmental impacts.

Science.gov (United States)

Vázquez-Rowe, Ian; Villanueva-Rey, Pedro; Moreira, Ma Teresa; Feijoo, Gumersindo

2012-05-15

A series of Galician (NW Spain) wines, such as Rías Baixas and Ribeiro have acquired international renown in the past few years. In this particular study, viticulture, vinification and bottling and packaging in a winery of the Ribeiro appellation were studied from a life cycle assessment perspective, with the main objective of identifying the largest environmental impacts for four different years of production (2007-2010). The selected functional unit was a 750 mL bottle of Ribeiro white wine, packaged for distribution. Inventory data was gathered mainly through direct communication using questionnaires. Results showed considerable annual variability in environmental performance, stressing the importance of including timeline analysis in the wine sector. Therefore, environmental scaling was proposed for the assessed wine based on the individual environmental impacts for each harvest year. Furthermore, the main hot spots identified were compost and pesticide production and emissions, in the agricultural phase and bottle production and electricity consumption, in the subsequent stages of wine production, in most of the selected impact categories. Suggested improvement opportunities included shifts in the compost transportation policy, recovery of natural resources for vineyard infrastructure, the introduction of new packaging formats in the bottling process and the use of pesticides with lower toxicity potential. Copyright © 2012 Elsevier Ltd. All rights reserved.

Qualitative and quantitative analysis of environmental samples by laser-induced breakdown spectrometry

International Nuclear Information System (INIS)

Zorov, N B; Popov, A M; Zaytsev, S M; Labutin, T A

2015-01-01

The key achievements in the determination of trace amounts of components in environmental samples (soils, ores, natural waters, etc.) by laser-induced breakdown spectrometry are considered. Unique capabilities of this method make it suitable for rapid analysis of metals and alloys, glasses, polymers, objects of cultural heritage, archaeological and various environmental samples. The key advantages of the method that account for its high efficiency are demonstrated, in particular, a small amount of analyzed material, the absence of sample preparation, the possibility of local and remote analysis of either one or several elements. The use of chemometrics in laser-induced breakdown spectrometry for qualitative sample classification is described in detail. Various approaches to improving the figures of merit of quantitative analysis of environmental samples are discussed. The achieved limits of detection for most elements in geochemical samples are critically evaluated. The bibliography includes 302 references

Idaho National Engineering Laboratory (INEL) Environmental Restoration Program (ERP), Baseline Safety Analysis File (BSAF). Revision 1

Energy Technology Data Exchange (ETDEWEB)

1994-06-20

This document was prepared to take the place of a Safety Evaluation Report since the Baseline Safety Analysis File (BSAF)and associated Baseline Technical Safety Requirements (TSR) File do not meet the requirements of a complete safety analysis documentation. Its purpose is to present in summary form the background of how the BSAF and Baseline TSR originated and a description of the process by which it was produced and approved for use in the Environmental Restoration Program.The BSAF is a facility safety reference document for INEL environmental restoration activities including environmental remediation of inactive waste sites and decontamination and decommissioning (D&D) of surplus facilities. The BSAF contains safety bases common to environmental restoration activities and guidelines for performing and documenting safety analysis. The common safety bases can be incorporated by reference into the safety analysis documentation prepared for individual environmental restoration activities with justification and any necessary revisions. The safety analysis guidelines in BSAF provide an accepted method for hazard analysis; analysis of normal, abnormal, and accident conditions; human factors analysis; and derivation of TSRS. The BSAF safety bases and guidelines are graded for environmental restoration activities.

Idaho National Engineering Laboratory (INEL) Environmental Restoration Program (ERP), Baseline Safety Analysis File (BSAF). Revision 1

International Nuclear Information System (INIS)

1994-01-01

This document was prepared to take the place of a Safety Evaluation Report since the Baseline Safety Analysis File (BSAF)and associated Baseline Technical Safety Requirements (TSR) File do not meet the requirements of a complete safety analysis documentation. Its purpose is to present in summary form the background of how the BSAF and Baseline TSR originated and a description of the process by which it was produced and approved for use in the Environmental Restoration Program.The BSAF is a facility safety reference document for INEL environmental restoration activities including environmental remediation of inactive waste sites and decontamination and decommissioning (D ampersand D) of surplus facilities. The BSAF contains safety bases common to environmental restoration activities and guidelines for performing and documenting safety analysis. The common safety bases can be incorporated by reference into the safety analysis documentation prepared for individual environmental restoration activities with justification and any necessary revisions. The safety analysis guidelines in BSAF provide an accepted method for hazard analysis; analysis of normal, abnormal, and accident conditions; human factors analysis; and derivation of TSRS. The BSAF safety bases and guidelines are graded for environmental restoration activities

Environmental Sustainability Analysis of Biodiesel Production

DEFF Research Database (Denmark)

Herrmann, Ivan Tengbjerg; Hauschild, Michael Michael Zwicky; Birkved, Morten

Due to their generally positive carbon dioxide balance, biofuels are seen as one of the energy carriers in a more sustainable future transportation energy system, but how good is their environmental sustainability, and where lie the main potentials for improvement of their sustainability? Questions...... like these require a life cycle perspective on the biofuel - from the cradle (production of the agricultural feedstock) to the grave (use as fuel). An environmental life cycle assessment is performed on biodiesel to compare different production schemes including chemical and enzymatic esterification...... with the use of methanol or ethanol. The life cycle assessment includes all processes needed for the production, distribution and use of the biodiesel (the product system), and it includes all relevant environmental impacts from the product system, ranging from global impacts like climate change and loss...

23 CFR 710.305 - Environmental analysis.

Science.gov (United States)

2010-04-01

... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RIGHT-OF-WAY AND ENVIRONMENT RIGHT-OF-WAY AND REAL ESTATE Project Development § 710.305 Environmental analysis. The National Environmental Policy Act... agreement for acquisition of right-of-way. Where applicable, a State also must complete Clean Air Act (42 U...

42 CFR 137.329 - What environmental considerations must be included in the construction project agreement?

Science.gov (United States)

2010-10-01

... must be included in the construction project agreement? The construction project agreement must include..., and (d) An assurance that no action will be taken on the construction phase of the project that would... 42 Public Health 1 2010-10-01 2010-10-01 false What environmental considerations must be included...

Method for environmental risk analysis (MIRA) revision 2007; Metode for miljoerettet risikoanalyse (MIRA) revisjon 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-04-15

OLF's instruction manual for carrying out environmental risk analyses provides a united approach and a common framework for environmental risk assessments. This is based on the best information available. The manual implies standardizations of a series of parameters, input data and partial analyses that are included in the environmental risk analysis. Environmental risk analyses carried out according to the MIRA method will thus be comparable between fields and between companies. In this revision an update of the text in accordance with today's practice for environmental risk analyses and prevailing regulations is emphasized. Moreover, method adjustments for especially protected beach habitats have been introduced, as well as a general method for estimating environmental risk concerning fish. Emphasis has also been put on improving environmental risk analysis' possibilities to contribute to a better management of environmental risk in the companies (ml)

Environmental impact analysis (EIA) concerning lodgepole pine forestry in Sweden

International Nuclear Information System (INIS)

Andersson, Bengt; Rosvall, Ola; Engelmark, Ola; Sjoeberg, Kjell

1999-01-01

This report presents an analysis of the ecological consequences of forestry with Canadian lodgepole pine introduced into Sweden. The report includes a compilation of present knowledge in the area, research priorities, and proposed measures for dealing with the negative environmental consequences that could arise. The point of departure of the analysis is a description of the properties of lodgepole pine, including species-specific characteristics of the tree, and changes in stand environment and silvicultural management practices that can be expected. The report describes the dispersal capacity of lodgepole pine in its new Swedish environment and the effects of host-parasite interactions. Thereafter, ecological effects on the capacity of the soil for sustainable production and on biological diversity at various scales (tree, stand, landscape) are analysed. Lodgepole pine forestry is also considered in relation to current laws and regulations as well as national and international environmental goals. At the end of the report, a strategy is proposed for handling the inevitable uncertainties associated with the introduction of exotic species 111 refs, 14 figs

Environmental impact analysis (EIA) concerning lodgepole-pine forestry in Sweden

Energy Technology Data Exchange (ETDEWEB)

Andersson, Bengt; Rosvall, O. [Forestry Research Inst. of Sweden, Uppsala (Sweden); Engelmark, O. [Umeaa Univ. (Sweden). Dept. of Ecological Botany; Sjoeberg, K. [Swedish Univ. of Agricultural Sciences, Umeaa (Sweden). Dept. of Animal Ecology

1999-07-01

This report presents an analysis of the ecological consequences of forestry with Canadian lodgepole pine introduced into Sweden. The report includes a compilation of present knowledge in the area, research priorities, and proposed measures for dealing with the negative environmental consequences that could arise. The point of departure of the analysis is a description of the properties of lodgepole pine, including species-specific characteristics of the tree, and changes in stand environment and silvicultural management practices that can be expected. The report describes the dispersal capacity of lodgepole pine in its new Swedish environment and the effects of host-parasite interactions. Thereafter, ecological effects on the capacity of the soil for sustainable production and on biological diversity at various scales (tree, stand, landscape) are analysed. Lodgepole pine forestry is also considered in relation to current laws and regulations as well as national and international environmental goals. At the end of the report, a strategy is proposed for handling the inevitable uncertainties associated with the introduction of exotic species.

Technical support document: Energy efficiency standards for consumer products: Refrigerators, refrigerator-freezers, and freezers including draft environmental assessment, regulatory impact analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

The Energy Policy and Conservation Act (P.L. 94-163), as amended by the National Appliance Energy Conservation Act of 1987 (P.L. 100-12) and by the National Appliance Energy Conservation Amendments of 1988 (P.L. 100-357), and by the Energy Policy Act of 1992 (P.L. 102-486), provides energy conservation standards for 12 of the 13 types of consumer products` covered by the Act, and authorizes the Secretary of Energy to prescribe amended or new energy standards for each type (or class) of covered product. The assessment of the proposed standards for refrigerators, refrigerator-freezers, and freezers presented in this document is designed to evaluate their economic impacts according to the criteria in the Act. It includes an engineering analysis of the cost and performance of design options to improve the efficiency of the products; forecasts of the number and average efficiency of products sold, the amount of energy the products will consume, and their prices and operating expenses; a determination of change in investment, revenues, and costs to manufacturers of the products; a calculation of the costs and benefits to consumers, electric utilities, and the nation as a whole; and an assessment of the environmental impacts of the proposed standards.

Economic/Environmental power dispatch for power systems including wind farms

Directory of Open Access Journals (Sweden)

Imen BEN JAOUED

2015-05-01

Full Text Available This paper presents the problem of the Economic/Environmental power Dispatching (EED of hybrid power system including wind energies. The power flow model for a stall regulated fixed speed wind generator (SR-FSWG system is discussed to assess the steady-state condition of power systems with wind farms. Modified Newton-Raphson algorithm including SR-FSWG is used to solve the load flow equations in which the state variables of the wind generators are combined with the nodal voltage magnitudes and angles of the entire network. The EED problem is a nonlinear constrained multi-objective optimization problem, two competing fuel cost and pollutant emission objectives should be minimized simultaneously while satisfying certain system constraints. In this paper, the resolution is done by the algorithm multi-objective particle swarm optimization (MOPSO. The effectiveness of the proposed method has been verified on IEEE 6-generator 30-bus test system and using MATLAB software package.

Environmental analysis in small and medium enterprises

International Nuclear Information System (INIS)

Luciani, R.; Andriola, L.; Di Franco, N.

2001-01-01

An environmental analysis is considered to be one of the primary goals for an enterprise environmental management. Nevertheless the complexity of the environmental problems and of its regulations prevents the small enterprises the possibility to perform an environmental policy (EMAS, ISO 14001). One of the most correct evaluation instrument for creating a datum-point standard could be the filling up a questionnaire, built up in according to the industrial enterprises need. It has the function of creating a primary step for a subsequent environmental management [it

Comparing Distributions of Environmental Outcomes for Regulatory Environmental Justice Analysis

Directory of Open Access Journals (Sweden)

Glenn Sheriff

2011-05-01

Full Text Available Economists have long been interested in measuring distributional impacts of policy interventions. As environmental justice (EJ emerged as an ethical issue in the 1970s, the academic literature has provided statistical analyses of the incidence and causes of various environmental outcomes as they relate to race, income, and other demographic variables. In the context of regulatory impacts, however, there is a lack of consensus regarding what information is relevant for EJ analysis, and how best to present it. This paper helps frame the discussion by suggesting a set of questions fundamental to regulatory EJ analysis, reviewing past approaches to quantifying distributional equity, and discussing the potential for adapting existing tools to the regulatory context.

Data management for environmental research

International Nuclear Information System (INIS)

Strand, R.H.

1976-01-01

The objective of managing environmental research data is to develop a resource sufficient for the study and potential solution of environmental problems. Consequently, environmnetal data management must include a broad spectrum of activities ranging from statistical analysis and modeling, through data set archiving to computer hardware procurement. This paper briefly summarizes the data management requirements for environmental research and the techniques and automated procedures which are currently used by the Environmental Sciences Division at Oak Ridge National Laboratory. Included in these requirements are readily retrievable data, data indexed by categories for retrieval and application, data documentation (including collection methods), design and error bounds, easily used analysis and display programs, and file manipulation routines. The statistical analysis system (SAS) and other systems provide the automated procedures and techniques for analysis and management of environmental research data

Nepal - Country Environmental Analysis : Strengthening Institutions and Management Systems for Enhanced Environmental Governance

OpenAIRE

World Bank

2007-01-01

The main objective of the Country Environmental Analysis (CEA) in Nepal is to identify opportunities for enhancing the overall performance of select environmental management systems through improvements in the effectiveness of institutions, policies, and processes. CEA has been built upon the following three primary study components: (a) an examination of the environmental issues associate...

Analysis of environmental impact assessment for large-scale X-ray medical equipments

International Nuclear Information System (INIS)

Fu Jin; Pei Chengkai

2011-01-01

Based on an Environmental Impact Assessment (EIA) project, this paper elaborates the basic analysis essentials of EIA for the sales project of large-scale X-ray medical equipment, and provides the analysis procedure of environmental impact and dose estimation method under normal and accident conditions. The key points of EIA for the sales project of large-scale X-ray medical equipment include the determination of pollution factor and management limit value according to the project's actual situation, the utilization of various methods of assessment and prediction such as analogy, actual measurement and calculation to analyze, monitor, calculate and predict the pollution during normal and accident condition. (authors)

Application of effective discharge analysis to environmental flow decision-making

Science.gov (United States)

McKay, S. Kyle; Freeman, Mary C.; Covich, A.P.

2016-01-01

Well-informed river management decisions rely on an explicit statement of objectives, repeatable analyses, and a transparent system for assessing trade-offs. These components may then be applied to compare alternative operational regimes for water resource infrastructure (e.g., diversions, locks, and dams). Intra- and inter-annual hydrologic variability further complicates these already complex environmental flow decisions. Effective discharge analysis (developed in studies of geomorphology) is a powerful tool for integrating temporal variability of flow magnitude and associated ecological consequences. Here, we adapt the effectiveness framework to include multiple elements of the natural flow regime (i.e., timing, duration, and rate-of-change) as well as two flow variables. We demonstrate this analytical approach using a case study of environmental flow management based on long-term (60 years) daily discharge records in the Middle Oconee River near Athens, GA, USA. Specifically, we apply an existing model for estimating young-of-year fish recruitment based on flow-dependent metrics to an effective discharge analysis that incorporates hydrologic variability and multiple focal taxa. We then compare three alternative methods of environmental flow provision. Percentage-based withdrawal schemes outcompete other environmental flow methods across all levels of water withdrawal and ecological outcomes.

Water resources and environmental input-output analysis and its key study issues: a review

Science.gov (United States)

YANG, Z.; Xu, X.

2013-12-01

inland water resources IOA. Recent internal study references related to environmental input-output table, pollution discharge analysis and environmental impact assessment had taken the leading position. Pollution discharge analysis mainly aiming at CO2 discharge had been regard as a new hotspot of environmental IOA. Environmental impact assessment was an important direction of inland environmental IOA in recent years. Key study issues including Domestic Technology Assumption(DTA) and Sectoral Aggregation(SA) had been mentioned remarkably. It was pointed out that multiply multi-region input-output analysis(MIOA) may be helpful to solve DTA. Because there was little study using effective analysis tools to quantify the bias of SA and the exploration of the appropriate sectoral aggregation degree was scarce, research dedicating to explore and solve these two key issues was deemed to be urgently needed. According to the study status, several points of outlook were proposed in the end.

Speciation analysis of ¹²⁹I and its applications in environmental research

DEFF Research Database (Denmark)

Zhang, Luyuan; Hou, Xiaolin

2013-01-01

129I, a long-lived radionuclide, is important in view of geological repository of nuclear waste, and environmental tracing applications related to diverse natural processes of iodine. The environmental behaviors and bioavailability of 129I are highly related to its species. A number of methods have...... been reported for speciation analysis of 129I in a variety of environmental samples. These methods have been applied in many researches, including conversion processes of iodine species in marine and terrestrial systems, migration and retention of iodine in soil and sediment, geochemical cycling...

Use of activation analysis of hair in environmental protection

International Nuclear Information System (INIS)

Obrusnik, I.

1982-01-01

Human hair is very suitable for use in environmental control monitoring because trace elements concentrate in it at higher levels than in most other organs. Unlike in other biological materials, the trace element contents in hair can be determined by instrumental neutron activation analysis (INAA), as the interference by 24 Na can be eliminated by appropriate washing of hair, e.g., using the procedure recommended by IAEA. The methods of sampling, washing and sample analysis using INAA and neutron activation analysis with radiochemical separation are described including the recommended way of the presentation of results. The results are presented of analyses for trace elements in hair from both little and highly polluted areas. (Ha)

Including environmental concerns in energy policies

International Nuclear Information System (INIS)

Potier, Michel

2014-05-01

In this article, the author comments the different impacts on the environment and risks related to energy, provided that all energies have an impact on the environment (renewable energies are generally cleaner than fossil energies) and these impacts can be on human health, ecosystems, buildings, crops, landscapes, and climate change. He comments the efforts made in the search for a higher energetic efficiency, and proposes an overview of the various available tools implemented by environmental policies in the energy sector: regulatory instruments, economic instruments, negotiated agreements, and informational instruments. He comments the implementation of an energetic taxing aimed at developing a greater respect of the environment

Undergraduate Research and Training in Ion-Beam Analysis of Environmental Materials

Science.gov (United States)

Vineyard, Michael F.; Chalise, Sajju; Clark, Morgan L.; LaBrake, Scott M.; McCalmont, Andrew M.; McGuire, Brendan C.; Mendez, Iseinie I.; Watson, Heather C.; Yoskowitz, Joshua T.

We have an active undergraduate research program at the Union College Ion-Beam Analysis Laboratory (UCIBAL) focused on the study of environmental materials. Accelerator-based ion-beam analysis (IBA) is a powerful tool for the study of environmental pollution because it can provide information on a broad range of elements with high sensitivity and low detection limits, is non-destructive, and requires little or no sample preparation. It also provides excellent training for the next generation of environmental scientists. Beams of protons and alpha particles with energies of a few MeV from the 1.1-MV tandem Pelletron accelerator (NEC Model 3SDH) in the UCIBAL are used to characterize environmental samples using IBA techniques such as proton-induced X-ray emission, Rutherford back-scattering, and proton-induced gamma-ray emission. Recent projects include the characterization of atmospheric aerosols in the Adirondack Mountains of upstate New York, the study of heavy metal pollutants in river sediment, measurements of Pb diffusion in sulfide minerals to help constrain the determination of the age of iron meteorites, and the search for heavy metals and toxins in artificial turf.

A hyperspectral image analysis workbench for environmental science applications

Energy Technology Data Exchange (ETDEWEB)

Christiansen, J.H.; Zawada, D.G.; Simunich, K.L.; Slater, J.C.

1992-10-01

A significant challenge to the information sciences is to provide more powerful and accessible means to exploit the enormous wealth of data available from high-resolution imaging spectrometry, or ``hyperspectral`` imagery, for analysis, for mapping purposes, and for input to environmental modeling applications. As an initial response to this challenge, Argonne`s Advanced Computer Applications Center has developed a workstation-based prototype software workbench which employs Al techniques and other advanced approaches to deduce surface characteristics and extract features from the hyperspectral images. Among its current capabilities, the prototype system can classify pixels by abstract surface type. The classification process employs neural network analysis of inputs which include pixel spectra and a variety of processed image metrics, including image ``texture spectra`` derived from fractal signatures computed for subimage tiles at each wavelength.

The utility of environmental exergy analysis for decision making in energy

International Nuclear Information System (INIS)

Simpson, Adam P.; Edwards, Chris F.

2013-01-01

The analysis framework discussed and employed in this paper utilizes the recent recognition that exergy is a form of environmental free energy to provide a fundamental basis for valuing environmental interactions independent from their secondary impacts. The framework is comprised of two separate components: (1) environmental exergy analysis and (2) anthropocentric sensitivity analysis. Environmental exergy analysis is based on fundamental thermodynamic principles and analysis techniques. It extends the principles of technical exergy analysis to the environment in order to quantify the location, magnitudes, and types of environmental impact—state change, alteration of natural transfers, and destruction change. Anthropocentric sensitivity analysis is based on the concepts of anthropocentric value and anthropocentric sensitivity. It enables the results of environmental exergy analysis to be interpreted for decision making, but at the expense of introducing some subjectivity into the framework. A key attribute of the framework is its ability to evaluate the environmental performance of energy systems on a level playing field, regardless of the specifics of the systems—i.e., resources consumed, products and by-products produced, or system size and time scale. The utility of the analysis framework for decision making is demonstrated in this paper through application to three example energy systems. - Highlights: ► Utilizes the recognition that exergy is a form of environmental free energy. ► Combines environmental exergy analysis and anthropocentric sensitivity analysis. ► Evaluates/compares environmental performance of systems on a level playing field. ► Independence from the system specifics—resources, by-products, sizes, time scales. ► Utility for decision making is demonstrated using real and notional energy systems

Environmental determinants of cardiovascular diseases risk factors: a qualitative directed content analysis.

Science.gov (United States)

Sabzmakan, Leila; Mohammadi, Eesa; Morowatisharifabad, Mohammad Ali; Afaghi, Ahmad; Naseri, Mohammad Hassan; Mirzaei, Masoud

2014-05-01

Cardiovascular diseases (CVDs) are the number one cause of death in the world. In most analyses of health problems, environment plays a significant and modifiable role in causing the problem either directly or indirectly through behavior. This study aims to understand the patients and healthcare providers' experiences about the environmental determinants of CVD risk factors based on the Precede Model. This qualitative study conducted over six months in 2012 at Diabetes Units of Health Centers associated with Alborz University of Medical Sciences and Health Services which is located in Karaj, Iran. The data were collected based on individual semi-structured interviews with 50 patients and 12 healthcare providers. Data analysis was performed simultaneous with data collection using the content analysis directed method. Lack of behaviors like stress control, healthy eating and physical activity were the roots of the risk factors for CVD. The environmental factor is one of the barriers for conducting these behaviors. The environmental barriers included of structural environment including "availability and accessibility of health resources", "new skills", and "law and policies" which are located in enabling category and social environment including "social support", "motivation to comply" and "consequences of behavior" which are located in reinforcing category. The most barriers to performing health behaviors were often structural. The environmental factors were barriers for doing healthy behaviors. These factors need to be considered to design health promotion interventions. Policymakers should not only focus on patients' education but also should provide specific facilities to enhance economic, social and cultural status.

An optimum analysis sequence for environmental gamma-ray spectrometry

International Nuclear Information System (INIS)

De la Torre, F.; Rios M, C.; Ruvalcaba A, M. G.; Mireles G, F.; Saucedo A, S.; Davila R, I.; Pinedo, J. L.

2010-10-01

This work aims to obtain an optimum analysis sequence for environmental gamma-ray spectroscopy by means of Genie 2000 (Canberra). Twenty different analysis sequences were customized using different peak area percentages and different algorithms for: 1) peak finding, and 2) peak area determination, and with or without the use of a library -based on evaluated nuclear data- of common gamma-ray emitters in environmental samples. The use of an optimum analysis sequence with certified nuclear information avoids the problems originated by the significant variations in out-of-date nuclear parameters of commercial software libraries. Interference-free gamma ray energies with absolute emission probabilities greater than 3.75% were included in the customized library. The gamma-ray spectroscopy system (based on a Ge Re-3522 Canberra detector) was calibrated both in energy and shape by means of the IAEA-2002 reference spectra for software intercomparison. To test the performance of the analysis sequences, the IAEA-2002 reference spectrum was used. The z-score and the reduced χ 2 criteria were used to determine the optimum analysis sequence. The results show an appreciable variation in the peak area determinations and their corresponding uncertainties. Particularly, the combination of second derivative peak locate with simple peak area integration algorithms provides the greater accuracy. Lower accuracy comes from the combination of library directed peak locate algorithm and Genie's Gamma-M peak area determination. (Author)

Environmental Modeling and Bayesian Analysis for Assessing Human Health Impacts from Radioactive Waste Disposal

Science.gov (United States)

Stockton, T.; Black, P.; Tauxe, J.; Catlett, K.

2004-12-01

Bayesian decision analysis provides a unified framework for coherent decision-making. Two key components of Bayesian decision analysis are probability distributions and utility functions. Calculating posterior distributions and performing decision analysis can be computationally challenging, especially for complex environmental models. In addition, probability distributions and utility functions for environmental models must be specified through expert elicitation, stakeholder consensus, or data collection, all of which have their own set of technical and political challenges. Nevertheless, a grand appeal of the Bayesian approach for environmental decision- making is the explicit treatment of uncertainty, including expert judgment. The impact of expert judgment on the environmental decision process, though integral, goes largely unassessed. Regulations and orders of the Environmental Protection Agency, Department Of Energy, and Nuclear Regulatory Agency orders require assessing the impact on human health of radioactive waste contamination over periods of up to ten thousand years. Towards this end complex environmental simulation models are used to assess "risk" to human and ecological health from migration of radioactive waste. As the computational burden of environmental modeling is continually reduced probabilistic process modeling using Monte Carlo simulation is becoming routinely used to propagate uncertainty from model inputs through model predictions. The utility of a Bayesian approach to environmental decision-making is discussed within the context of a buried radioactive waste example. This example highlights the desirability and difficulties of merging the cost of monitoring, the cost of the decision analysis, the cost and viability of clean up, and the probability of human health impacts within a rigorous decision framework.

The Environmental Scenario Generator (ESG: a distributed environmental data archive analysis tool

Directory of Open Access Journals (Sweden)

E A Kihn

2006-01-01

Full Text Available The Environmental Scenario Generator (ESG is a network distributed software system designed to allow a user to interact with archives of environmental data for the purpose of scenario extraction, data analysis and integration with existing models that require environmental input. The ESG uses fuzzy-logic based search tools to allow a user to look for specific environmental scenarios in vast archives by specifying the search in human linguistic terms. For example, the user can specify a scenario such as a "cloud free week" or "high winds and low pressure" and then search relevant archives available across the network to get a list of matching events. The ESG hooks to existing archives of data by providing a simple communication framework and an efficient data model for exchanging data. Once data has been delivered by the distributed archives in the ESG data model, it can easily be accessed by the visualization, integration and analysis components to meet specific user requests. The ESG implementation provides a framework which can be taken as a pattern applicable to other distributed archive systems.

Bioenergy production and use: Comparative analysis of the economic and environmental effects

International Nuclear Information System (INIS)

Hennig, Christiane; Gawor, Marek

2012-01-01

Highlights: ► Study of 12 bioenergy generation pathways as to environmental and economic aspects. ► LCA focused on the GWP, acidification, eutrophication, cumulative energy demand. ► Economic analysis determined electricity production costs based on annuity method. ► Wood-based plants have the best characteristics from environmental point of view. ► Wood-based plants have lowest electricity production costs, biogas plants make gain. - Abstract: This study analyses the use of liquid, solid and gaseous biomass for power generation in Germany with respect to the Renewable Energy Sources Act (EEG), a significant policy instrument for promoting electricity generation based on renewable energy sources. The aim is the identification of bioenergy conversion pathways that have a low environmental impact and are cost-effective. To achieve this objective several research steps were undertaken, including a life-cycle analysis (LCA), economic analysis and the determination of the CO 2 abatement costs. Besides, the authors show and discuss how a simplification of the environmental assessment by considering only the impact category greenhouse gases or the application of different calculation methodologies (i.e. allocation rules between electricity and heat produced) can affect the results. Overall the results show that the use of solid (wood) and gaseous biomass pathways causes both the lowest environmental impacts and electricity production costs when used for electricity generation. The choice of the modelling and calculation methodology may significantly influence the outcome (i.e. application of an exergetic allocation increases the environmental burden related to electricity generation). The lowest CO 2 -abatement costs were determined for the biodegradable waste pathway.

Proposal for elicitation and analysis of environmental requirements into the construction design process: a case study

Directory of Open Access Journals (Sweden)

Camila Pegoraro

2010-05-01

Full Text Available Proposal: As new demands from sustainable development, environmental requirements arise as another challenge to design process management. It is already known that companies which design buildings are usually exposed to many managerial difficulties. Faced to the environmental demands, these companies require new facilities to align environmental requirements to the business goals and to include them properly in design process. This paper is based on a case study in a construction company, which was developed through interviews and document analysis. It is intended to present a procedure for the project environmental requirements elicitation, organization and analysis, which is based on the requirements engineering (ER concepts. As results it was concluded that the ER concepts are useful for the environmental requirements integration into the design process and that strategic planning should give directions for the effective environmental requirements adherence. Moreover, a procedure for environmental requirements modeling is proposed. Key-words: Design process, Requirements management, Environmental requirements, Construction

A hyperspectral image analysis workbench for environmental science applications

Energy Technology Data Exchange (ETDEWEB)

Christiansen, J.H.; Zawada, D.G.; Simunich, K.L.; Slater, J.C.

1992-01-01

A significant challenge to the information sciences is to provide more powerful and accessible means to exploit the enormous wealth of data available from high-resolution imaging spectrometry, or hyperspectral'' imagery, for analysis, for mapping purposes, and for input to environmental modeling applications. As an initial response to this challenge, Argonne's Advanced Computer Applications Center has developed a workstation-based prototype software workbench which employs Al techniques and other advanced approaches to deduce surface characteristics and extract features from the hyperspectral images. Among its current capabilities, the prototype system can classify pixels by abstract surface type. The classification process employs neural network analysis of inputs which include pixel spectra and a variety of processed image metrics, including image texture spectra'' derived from fractal signatures computed for subimage tiles at each wavelength.

WATERSHED SELECTION FOR ENVIRONMENTAL REHABILITATION USING MULTICRITERIA ANALYSIS

Directory of Open Access Journals (Sweden)

Carlos Eduardo da Silva Francisco

2009-10-01

Full Text Available The Anhumas creek watershed, in the region of Campinas, São Paulo State, Brazil, is degraded also as a result of unplanned land use of its riparian zones, considered Permanent Preservation Areas (APP. Therefore, river flow is unstable, promoting frequent flood damages, besides the lack of several environmental functions of its APPs. Environmental recovery of a degraded area requires a comprehensive effort, often multidisciplinary. Multicriterial analysis is a tool which allows gathering a diversity of attributes of the studied subject, weighing and valuating them, helping in the decision making effort. This work aims to apply two methods of multicriteria analysis to optimize the selection of a watershed for an environmental recovery study of APPs in the Anhumas watershed. The Anhumas watershed was divided in 7 sub-basins aiming the selection of one of those to implement an environmental planning study and to establish and rank areas that should be prioritized for recovery. Thirteen environmental criteria were selected for application of multicriteria analysis using the methods of Compromise Programming (PC and Cooperative Game Theory (CGT. Relevance of each criterion to the analysis was given by a questionnaire answered by specialists. Basin selection results showed no difference neither between PC and CGT nor between mean or mode used to standardize weights given by specialists. Multicriteria analysis was effective, but allowed enough flexibility for the decision maker (DM to adjust undesired analysis distortions. After DM adjustments, the priority basins were ranked as basins 4 > 7 > 5 > 6 > 2 > 3 > 1. Important procedures when carrying out such an analysis were to avoid conceptual overlapping among different criteria, to implement appropriate value judgment for each criterion and to use decision maker expertise to supplement weights obtained with specialists.

Environmental risk analysis of hazardous material rail transportation

Energy Technology Data Exchange (ETDEWEB)

Saat, Mohd Rapik, E-mail: mohdsaat@illinois.edu [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States); Werth, Charles J.; Schaeffer, David [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States); Yoon, Hongkyu [Sandia National Laboratories, Albuquerque, NM 87123 (United States); Barkan, Christopher P.L. [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States)

2014-01-15

Highlights: • Comprehensive, nationwide risk assessment of hazardous material rail transportation. • Application of a novel environmental (i.e. soil and groundwater) consequence model. • Cleanup cost and total shipment distance are the most significant risk factors. • Annual risk varies from $20,000 to $560,000 for different products. • Provides information on the risk cost associated with specific product shipments. -- Abstract: An important aspect of railroad environmental risk management involves tank car transportation of hazardous materials. This paper describes a quantitative, environmental risk analysis of rail transportation of a group of light, non-aqueous-phase liquid (LNAPL) chemicals commonly transported by rail in North America. The Hazardous Materials Transportation Environmental Consequence Model (HMTECM) was used in conjunction with a geographic information system (GIS) analysis of environmental characteristics to develop probabilistic estimates of exposure to different spill scenarios along the North American rail network. The risk analysis incorporated the estimated clean-up cost developed using the HMTECM, route-specific probability distributions of soil type and depth to groundwater, annual traffic volume, railcar accident rate, and tank car safety features, to estimate the nationwide annual risk of transporting each product. The annual risk per car-mile (car-km) and per ton-mile (ton-km) was also calculated to enable comparison between chemicals and to provide information on the risk cost associated with shipments of these products. The analysis and the methodology provide a quantitative approach that will enable more effective management of the environmental risk of transporting hazardous materials.

Environmental risk analysis of hazardous material rail transportation

International Nuclear Information System (INIS)

Saat, Mohd Rapik; Werth, Charles J.; Schaeffer, David; Yoon, Hongkyu; Barkan, Christopher P.L.

2014-01-01

Highlights: • Comprehensive, nationwide risk assessment of hazardous material rail transportation. • Application of a novel environmental (i.e. soil and groundwater) consequence model. • Cleanup cost and total shipment distance are the most significant risk factors. • Annual risk varies from $20,000 to $560,000 for different products. • Provides information on the risk cost associated with specific product shipments. -- Abstract: An important aspect of railroad environmental risk management involves tank car transportation of hazardous materials. This paper describes a quantitative, environmental risk analysis of rail transportation of a group of light, non-aqueous-phase liquid (LNAPL) chemicals commonly transported by rail in North America. The Hazardous Materials Transportation Environmental Consequence Model (HMTECM) was used in conjunction with a geographic information system (GIS) analysis of environmental characteristics to develop probabilistic estimates of exposure to different spill scenarios along the North American rail network. The risk analysis incorporated the estimated clean-up cost developed using the HMTECM, route-specific probability distributions of soil type and depth to groundwater, annual traffic volume, railcar accident rate, and tank car safety features, to estimate the nationwide annual risk of transporting each product. The annual risk per car-mile (car-km) and per ton-mile (ton-km) was also calculated to enable comparison between chemicals and to provide information on the risk cost associated with shipments of these products. The analysis and the methodology provide a quantitative approach that will enable more effective management of the environmental risk of transporting hazardous materials

Initial Northwest Power Act Power Sales Contracts : Final Environmental Impact Statement. Volume 1, Environmental Analysis.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1992-01-01

This is volume 1 of the final environmental impact statement of the Bonneville Power Administration Information is included on the following: Purpose of and need for action; alternatives including the proposed action; affected environment; and environmental consequences.

Environmental Analysis

Science.gov (United States)

1980-01-01

Burns & McDonnell Engineering's environmental control study is assisted by NASA's Computer Software Management and Information Center's programs in environmental analyses. Company is engaged primarily in design of such facilities as electrical utilities, industrial plants, wastewater treatment systems, dams and reservoirs and aviation installations. Company also conducts environmental engineering analyses and advises clients as to the environmental considerations of a particular construction project. Company makes use of many COSMIC computer programs which have allowed substantial savings.

Use of the environmental resource management and analysis system at the Fernald Environmental Management Project

International Nuclear Information System (INIS)

Erjavec, J.L.

1992-01-01

In the past, hazardous waste site characterization and remediation using computer-based technologies has been a difficult and time-consuming process because of the need to analyze data using non-interfaced computer and software environments. The Environmental Resource Management and Analysis System (ERMA) was developed as an innovative approach to the management, analyses and depiction of data collected during a hazardous site remediation. A modular, multi-disciplined software package, ERMA integrates an environmental database management system with variety of Geographic Information System technologies. ERMA capabilities include spatial analysis, three-dimensional subsurface geologic interpretation and modeling, terrain modeling, and groundwater flow and contaminant transport modeling. ERMA's data management is provided through a set of user-modifiable, graphic interface tools that permit complex data queries, data modification and reporting. An ERMA prototype has been implemented at the Fernald Environmental Management Project (a Department of Energy cleanup site) using groundwater monitoring and elevation data collected over the last few years. ERMA has enabled the precision posting of data from the 853 groundwater monitoring wells at the site. Data from these wells have ben used to define the piezometric surface of the Great Miami Aquifer and correlate it with the uranium concentration contours of an identified groundwater plume. Using spatial query capabilities, radioactive sampling results from monitoring wells have been compared to contour maps defining the extent of the plume to determine the validity of those maps and the need for additional well locations

Environmental sampling for trace analysis

International Nuclear Information System (INIS)

Markert, B.

1994-01-01

Often too little attention is given to the sampling before and after actual instrumental measurement. This leads to errors, despite increasingly sensitive analytical systems. This is one of the first books to pay proper attention to representative sampling. It offers an overview of the most common techniques used today for taking environmental samples. The techniques are clearly presented, yield accurate and reproducible results and can be used to sample -air - water - soil and sediments - plants and animals. A comprehensive handbook, this volume provides an excellent starting point for researchers in the rapidly expanding field of environmental analysis. (orig.)

An optimum analysis sequence for environmental gamma-ray spectrometry

Energy Technology Data Exchange (ETDEWEB)

De la Torre, F.; Rios M, C.; Ruvalcaba A, M. G.; Mireles G, F.; Saucedo A, S.; Davila R, I.; Pinedo, J. L., E-mail: fta777@hotmail.co [Universidad Autonoma de Zacatecas, Centro Regional de Estudis Nucleares, Calle Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

2010-10-15

This work aims to obtain an optimum analysis sequence for environmental gamma-ray spectroscopy by means of Genie 2000 (Canberra). Twenty different analysis sequences were customized using different peak area percentages and different algorithms for: 1) peak finding, and 2) peak area determination, and with or without the use of a library -based on evaluated nuclear data- of common gamma-ray emitters in environmental samples. The use of an optimum analysis sequence with certified nuclear information avoids the problems originated by the significant variations in out-of-date nuclear parameters of commercial software libraries. Interference-free gamma ray energies with absolute emission probabilities greater than 3.75% were included in the customized library. The gamma-ray spectroscopy system (based on a Ge Re-3522 Canberra detector) was calibrated both in energy and shape by means of the IAEA-2002 reference spectra for software intercomparison. To test the performance of the analysis sequences, the IAEA-2002 reference spectrum was used. The z-score and the reduced {chi}{sup 2} criteria were used to determine the optimum analysis sequence. The results show an appreciable variation in the peak area determinations and their corresponding uncertainties. Particularly, the combination of second derivative peak locate with simple peak area integration algorithms provides the greater accuracy. Lower accuracy comes from the combination of library directed peak locate algorithm and Genie's Gamma-M peak area determination. (Author)

Screening Analysis for the Environmental Risk Evaluation System Fiscal Year 2011 Report Environmental Effects of Offshore Wind Energy

Energy Technology Data Exchange (ETDEWEB)

Copping, Andrea E.; Hanna, Luke A.

2011-11-01

Potential environmental effects of offshore wind (OSW) energy development are not well understood, and yet regulatory agencies are required to make decisions in spite of substantial uncertainty about environmental impacts and their long-term consequences. An understanding of risks associated with interactions between OSW installations and avian and aquatic receptors, including animals, habitats, and ecosystems, can help define key uncertainties and focus regulatory actions and scientific studies on interactions of most concern. During FY 2011, Pacific Northwest National Laboratory (PNNL) scientists adapted and applied the Environmental Risk Evaluation System (ERES), first developed to examine the effects of marine and hydrokinetic energy devices on aquatic environments, to offshore wind development. PNNL scientists conducted a risk screening analysis on two initial OSW cases: a wind project in Lake Erie and a wind project off the Atlantic coast of the United States near Atlantic City, New Jersey. The screening analysis revealed that top-tier stressors in the two OSW cases were the dynamic effects of the device (e.g., strike), accidents/disasters, and effects of the static physical presence of the device, such as alterations in bottom habitats. Receptor interactions with these stressors at the highest tiers of risk were dominated by threatened and endangered animals. Risk to the physical environment from changes in flow regime also ranked high. Peer review of this process and results will be conducted during FY 2012. The ERES screening analysis provides an assessment of the vulnerability of environmental receptors to stressors associated with OSW installations; a probability analysis is needed to determine specific risk levels to receptors. As more data become available that document effects of offshore wind farms on specific receptors in U.S. coastal and Great Lakes waters, probability analyses will be performed.

Risk analysis within environmental impact assessment of proposed construction activity

Energy Technology Data Exchange (ETDEWEB)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-15

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

Risk analysis within environmental impact assessment of proposed construction activity

International Nuclear Information System (INIS)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-01

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

Environmental management in public hospitals: Environmental management in Colombia

Directory of Open Access Journals (Sweden)

Juan Pablo Rodríguez-Miranda

2016-10-01

Conclusions: Hospitals can apply broader environmental management instruments, including life cycle analysis of their products and services and monitoring of the carbon footprint; they may also take into account the different areas of environmental impact of their operation.

Time perspective and environmental engagement: a meta-analysis.

Science.gov (United States)

Milfont, Taciano L; Wilson, Jessie; Diniz, Pollyane

2012-01-01

Environmental issues entail both a social conflict (private vs. public interests) and a temporal conflict (short- vs. long-term interests). This paper focuses on the role temporal concerns play in influencing environmental engagement by quantitatively integrating results of studies that assessed the associations between time perspective and proenvironmental attitudes and behaviors. The meta-analysis included a total of 19 independent samples and 6,301 participants from seven countries (Australia, Brazil, Germany, Mexico, New Zealand, Norway, and the United States). Results showed that the associations between time perspective and proenvironmental behaviors were higher than those for proenvironmental attitudes. Supporting predictions, the associations between future time perspective and proenvironmental behaviors were strong and nontrivial compared to those for the combined past-present time perspective. The findings indicate that future time perspective seems to play an important role in influencing individuals' attitudes and behaviors towards the environment. Implications of the findings for theory and practice are discussed.

Social Cost Benefit Analysis for Environmental Policy-Making

International Nuclear Information System (INIS)

De Zeeuw, A.; In t Veld, R.; Van Soest, D.; Meuleman, L.; Hoogewoning, P.

2008-01-01

Review of the theoretical literature and the current debate on the valuation of environmental goods and services, on the discounting of future benefits and costs, and on how social cost benefit analysis (SCBAs) can be integrated in the policy and decision making process. It is concluded that SCBA can be a good decision support method in environmental policy-making if it is transparent and if all impacts are taken into account. Furthermore, the SCBA process should be participative, and politicians must be prepared to take responsibility for the assumptions behind the SCBA, including the assumptions on valuation and on the discount rate. Such a political role makes each SCBA a unique product of a politically responsible actor, and makes it possible for other stakeholders to have calculated an alternative SCBA based on their own assumptions. This Background Study also contains the proceedings of the international SCBA conference organised by RMNO on 16-17 January 2008

VKTA Rossendorf: Laboratory for Environmental and Radionuclide Analysis

International Nuclear Information System (INIS)

Koehler, M.; Knappik, R.; Fiola, K.

2015-01-01

The VKTA (Nuclear Engineering and Analytics Inc.) is charged by the Free State of Saxony with the decommissioning and waste management of the nuclear installations at the research site Dresden-Rossendorf. This task includes the safe management and disposal of fissile material and radioactive wastes. The acquired expertise and our solution-oriented way of working are the basis for a varied range of services especially the environmental and radionuclide analyzes. The Laboratory for Environmental and Radionuclide Analysis is accredited according to DIN EN ISO/IEC 17025 and provides a sound range of analytical and metrological services including their coordination and management. The personnel and the rooms, measuring and technical equipment are particularly designed for our special field, the measuring of radioactivity. We are focussed on measuring artificial and natural radionuclides in a wide range of activity and in different sample matrices (e.g., urine, faeces, metals, soil, concrete, food, liquids). With the flexible accreditation of the radionuclide analytics the Laboratory is able to react shortly to changing requirements in decommissioning, environmental monitoring and radiation protection. Essential chemical and radiochemical methods are e.g.: · Alpha particle spectrometry, · Liquid scintillation counting, · gamma ray spectrometry, including Ultra-Low-Level, · High-resolution ICP-MS, · Chromatographic methods such as ion chromatography, gas chromatography, HPLC, · Electrochemical measuring methods such as potentiometry, voltammetry. The Laboratory offers analytical services to the research site Dresden-Rossendorf and national and international customers adapting its analytical procedures to the special needs of customers. The presentation demonstrates on the basis of examples the work of Laboratory within the scope of decommissioning of nuclear facilities, especially at a research site, from radiological preliminary investigation to declaration of

Applications of short-lived activation products in neutron activation analysis of bio-environmental specimens

International Nuclear Information System (INIS)

1987-03-01

This report discusses the advantages and disadvantages, special techniques, and actual and potential applications of neutron activation analysis (NAA) utilizing short-lived neutron-induced products, with special reference to the analysis of samples of biological and environmental origin. Attention is devoted mainly to products having half-lives in roughly the range of 10 milliseconds to 60 seconds, but with some discussion of the usefulness of even shorter-lived species, and ones with half-lives as long as a few minutes. Important aspects of the analytical methodology include sample preparation, irradiation/transfer systems, activity measurements, data processing and analytical quality assurance. It is concluded that several trace elements can be determined in bio-environmental samples (as well as in samples of industrial, geochemical and other origin). In particular, this method provides analytical possibilities for several elements (e.g. B, F, Li and V) that are difficult to determine in some matrices at trace levels by any other technique. These conclusions are illustrated in an annex by results of calculations in which the applicability of the techniques to the analysis of several biological and environmental reference materials is evaluated by means of an advance computer prediction program. The report concludes with an annotated bibliography of relevant publications (including abstracts, where available) taken from the INIS database. (author)

Data management and statistical analysis for environmental assessment

International Nuclear Information System (INIS)

Wendelberger, J.R.; McVittie, T.I.

1995-01-01

Data management and statistical analysis for environmental assessment are important issues on the interface of computer science and statistics. Data collection for environmental decision making can generate large quantities of various types of data. A database/GIS system developed is described which provides efficient data storage as well as visualization tools which may be integrated into the data analysis process. FIMAD is a living database and GIS system. The system has changed and developed over time to meet the needs of the Los Alamos National Laboratory Restoration Program. The system provides a repository for data which may be accessed by different individuals for different purposes. The database structure is driven by the large amount and varied types of data required for environmental assessment. The integration of the database with the GIS system provides the foundation for powerful visualization and analysis capabilities

Uncertainty analysis of environmental models

International Nuclear Information System (INIS)

Monte, L.

1990-01-01

In the present paper an evaluation of the output uncertainty of an environmental model for assessing the transfer of 137 Cs and 131 I in the human food chain are carried out on the basis of a statistical analysis of data reported by the literature. The uncertainty analysis offers the oppotunity of obtaining some remarkable information about the uncertainty of models predicting the migration of non radioactive substances in the environment mainly in relation to the dry and wet deposition

Environmental analysis for pipeline gas demonstration plants

Energy Technology Data Exchange (ETDEWEB)

Stinton, L.H.

1978-09-01

The Department of Energy (DOE) has implemented programs for encouraging the development and commercialization of coal-related technologies, which include coal gasification demonstration-scale activities. In support of commercialization activities the Environmental Analysis for Pipeline Gas Demonstration Plants has been prepared as a reference document to be used in evaluating potential environmental and socioeconomic effects from construction and operation of site- and process-specific projects. Effluents and associated impacts are identified for six coal gasification processes at three contrasting settings. In general, impacts from construction of a high-Btu gas demonstration plant are similar to those caused by the construction of any chemical plant of similar size. The operation of a high-Btu gas demonstration plant, however, has several unique aspects that differentiate it from other chemical plants. Offsite development (surface mining) and disposal of large quantities of waste solids constitute important sources of potential impact. In addition, air emissions require monitoring for trace metals, polycyclic aromatic hydrocarbons, phenols, and other emissions. Potential biological impacts from long-term exposure to these emissions are unknown, and additional research and data analysis may be necessary to determine such effects. Possible effects of pollutants on vegetation and human populations are discussed. The occurrence of chemical contaminants in liquid effluents and the bioaccumulation of these contaminants in aquatic organisms may lead to adverse ecological impact. Socioeconomic impacts are similar to those from a chemical plant of equivalent size and are summarized and contrasted for the three surrogate sites.

A surplus production model including environmental effects: Application to the Senegalese white shrimp stocks

Science.gov (United States)

Thiaw, Modou; Gascuel, Didier; Jouffre, Didier; Thiaw, Omar Thiom

2009-12-01

In Senegal, two stocks of white shrimp ( Penaeusnotialis) are intensively exploited, one in the north and another in the south. We used surplus production models including environmental effects to analyse their changes in abundance over the past 10 years and to estimate their Maximum Sustainable Yield (MSY) and the related fishing effort ( EMSY). First, yearly abundance indices were estimated from commercial statistics using GLM techniques. Then, two environmental indices were alternatively tested in the model: the coastal upwelling intensity from wind speeds provided by the SeaWifs database and the primary production derived from satellite infrared images of chlorophyll a. Models were fitted, with or without the environmental effect, to the 1996-2005 time series. They express stock abundance and catches as functions of the fishing effort and the environmental index (when considered). For the northern stock, fishing effort and abundance fluctuate over the period without any clear trends. The model based on the upwelling index explains 64.9% of the year-to-year variability. It shows that the stock was slightly overexploited in 2002-2003 and is now close to full exploitation. Stock abundance strongly depends on environmental conditions; consequently, the MSY estimate varies from 300 to 900 tons according to the upwelling intensity. For the southern stock, fishing effort has strongly increased over the past 10 years, while abundance has been reduced 4-fold. The environment has a significant effect on abundance but only explains a small part of the year-to-year variability. The best fit is obtained using the primary production index ( R2 = 0.75), and the stock is now significantly overfished regardless of environmental conditions. MSY varies from 1200 to 1800 tons according to environmental conditions. Finally, in northern Senegal, the upwelling is highly variable from year to year and constitutes the major factor determining productivity. In the south, hydrodynamic

Collection and analysis of environmental radiation data using a desktop computer

International Nuclear Information System (INIS)

Gogolak, C.V.

1982-04-01

A portable instrumentation sytem using a Hewlett-Packard HP-9825 desktop computer for the collection and analysis of environmental radiation data is described. Procedures for the transmission of data between the HP-9825 and various nuclear counters are given together with a description of the necessary hardware and software. Complete programs for the analysis of Ge(Li) and NaI(Tl) gamma-ray spectra, high pressure ionization chamber monitor data, 86 Kr monitor data and air filter sample alpha particle activity measurements are presented. Some utility programs, intended to increase system flexibility, are included

The environmental footprint of a membrane bioreactor treatment process through Life Cycle Analysis

International Nuclear Information System (INIS)

Ioannou-Ttofa, L.; Foteinis, S.; Chatzisymeon, E.; Fatta-Kassinos, D.

2016-01-01

This study includes an environmental analysis of a membrane bioreactor (MBR), the objective being to quantitatively define the inventory of the resources consumed and estimate the emissions produced during its construction, operation and end-of-life deconstruction. The environmental analysis was done by the life cycle assessment (LCA) methodology, in order to establish with a broad perspective and in a rigorous and objective way the environmental footprint and the main environmental hotspots of the examined technology. Raw materials, equipment, transportation, energy use, as well as air- and waterborne emissions were quantified using as a functional unit, 1 m"3 of urban wastewater. SimaPro 8.0.3.14 was used as the LCA analysis tool, and two impact assessment methods, i.e. IPCC 2013 version 1.00 and ReCiPe version 1.10, were employed. The main environmental hotspots of the MBR pilot unit were identified to be the following: (i) the energy demand, which is by far the most crucial parameter that affects the sustainability of the whole process, and (ii) the material of the membrane units. Overall, the MBR technology was found to be a sustainable solution for urban wastewater treatment, with the construction phase having a minimal environmental impact, compared to the operational phase. Moreover, several alternative scenarios and areas of potential improvement, such as the diversification of the electricity mix and the material of the membrane units, were examined, in order to minimize as much as possible the overall environmental footprint of this MBR system. It was shown that the energy mix can significantly affect the overall sustainability of the MBR pilot unit (i.e. up to 95% reduction of the total greenhouse gas emissions was achieved with the use of an environmentally friendly energy mix), and the contribution of the construction and operational phase to the overall environmental footprint of the system. - Highlights: • The environmental sustainability of an

Environmental benefit analysis of strategies for potable water savings in residential buildings.

Science.gov (United States)

Marinoski, Ana Kelly; Rupp, Ricardo Forgiarini; Ghisi, Enedir

2018-01-15

The objective of this study is to assess the environmental benefit of using rainwater, greywater, water-efficient appliances and their combinations in low-income houses. The study was conducted surveying twenty households located in southern Brazil, which resulted in water end-uses estimation. Then, embodied energy, potential for potable water savings and sewage reduction when using the different strategies were estimated. The environmental benefit analysis of these strategies was performed using an indicator that includes embodied energy, potable water savings, reduction of sewage and energy consumption in the water utility, and sewage production during the life cycle of the system. The results indicated that the strategy with the greatest environmental benefit is the use of water-efficient appliances, which resulted in substantial water savings and reduction of sewage, causing low environmental impact due to lower embodied energy over the life cycle. Copyright © 2017 Elsevier Ltd. All rights reserved.

Statistical Analysis of Environmental Tritium around Wolsong Site

Energy Technology Data Exchange (ETDEWEB)

Kim, Ju Youl [FNC Technology Co., Yongin (Korea, Republic of)

2010-04-15

To find the relationship among airborne tritium, tritium in rainwater, TFWT (Tissue Free Water Tritium) and TBT (Tissue Bound Tritium), statistical analysis is conducted based on tritium data measured at KHNP employees' house around Wolsong nuclear power plants during 10 years from 1999 to 2008. The results show that tritium in such media exhibits a strong seasonal and annual periodicity. Tritium concentration in rainwater is observed to be highly correlated with TFWT and directly transmitted to TFWT without delay. The response of environmental radioactivity of tritium around Wolsong site is analyzed using time-series technique and non-parametric trend analysis. Tritium in the atmosphere and rainwater is strongly auto-correlated by seasonal and annual periodicity. TFWT concentration in pine needle is proven to be more sensitive to rainfall phenomenon than other weather variables. Non-parametric trend analysis of TFWT concentration within pine needle shows a increasing slope in terms of confidence level of 95%. This study demonstrates a usefulness of time-series and trend analysis for the interpretation of environmental radioactivity relationship with various environmental media.

77 FR 46516 - Notice of Availability of the Final Environmental Impact Statement, Including a Programmatic...

Science.gov (United States)

2012-08-03

... Impact Statement, Including a Programmatic Agreement, for the Clark, Lincoln, and White Pine Counties...) has prepared a Final Environmental Impact Statement (EIS) and a Programmatic Agreement (PA), which is.... 100 N., Nephi Beaver Library, 55 W. Center St., Beaver FOR FURTHER INFORMATION CONTACT: Penny Woods...

76 FR 34097 - Notice of Availability of the Draft Environmental Impact Statement, Including a Draft...

Science.gov (United States)

2011-06-10

... Impact Statement, Including a Draft Programmatic Agreement, for the Clark, Lincoln, and White Pine...) has prepared a Draft Environmental Impact Statement (EIS) and a Draft Programmatic Agreement (PA.... 100 N., Nephi Beaver Library, 55 W. Center St., Beaver. The Draft EIS describes and analyzes SNWA's...

MetaComp: comprehensive analysis software for comparative meta-omics including comparative metagenomics.

Science.gov (United States)

Zhai, Peng; Yang, Longshu; Guo, Xiao; Wang, Zhe; Guo, Jiangtao; Wang, Xiaoqi; Zhu, Huaiqiu

2017-10-02

During the past decade, the development of high throughput nucleic sequencing and mass spectrometry analysis techniques have enabled the characterization of microbial communities through metagenomics, metatranscriptomics, metaproteomics and metabolomics data. To reveal the diversity of microbial communities and interactions between living conditions and microbes, it is necessary to introduce comparative analysis based upon integration of all four types of data mentioned above. Comparative meta-omics, especially comparative metageomics, has been established as a routine process to highlight the significant differences in taxon composition and functional gene abundance among microbiota samples. Meanwhile, biologists are increasingly concerning about the correlations between meta-omics features and environmental factors, which may further decipher the adaptation strategy of a microbial community. We developed a graphical comprehensive analysis software named MetaComp comprising a series of statistical analysis approaches with visualized results for metagenomics and other meta-omics data comparison. This software is capable to read files generated by a variety of upstream programs. After data loading, analyses such as multivariate statistics, hypothesis testing of two-sample, multi-sample as well as two-group sample and a novel function-regression analysis of environmental factors are offered. Here, regression analysis regards meta-omic features as independent variable and environmental factors as dependent variables. Moreover, MetaComp is capable to automatically choose an appropriate two-group sample test based upon the traits of input abundance profiles. We further evaluate the performance of its choice, and exhibit applications for metagenomics, metaproteomics and metabolomics samples. MetaComp, an integrative software capable for applying to all meta-omics data, originally distills the influence of living environment on microbial community by regression analysis

Review comments on Environmental Analysis Cost Reduction Proposals (WIPP-DOE-136), July 1982

International Nuclear Information System (INIS)

Channell, J.K.

1982-11-01

The cost reduction proposals have the laudable goal of significantly reducing the total capital And operating cost connected with WIPP. Furthermore, since the proposed changes would reduce the size and operating rate of the project, they would be expected to have decreased environmental And socioeconomic impacts. However, some of these cost reduction proposals do decrease factors of safety in various components of the project or trade off one type of environmental detriment for another. The report does not contain sufficient detail to justify all of the conclusions reached; more discussion and quantitative information (including costs) is necessary in some cases. Also, there are places where the report is unclear or contradictory. Without a more detailed evaluation, EEG is unable to conclude that each of these cost reduction proposals either has a net environmental/health and safety benefit or a cost savings that justifies a net detriment. A revised Environmental Analysis (EA) should either include additional information or specifically reference backup documents where these conclusions have been justified. In addition, the EA needs to be revised to include the effect of the recently announced (11/18/82) decision by DOE to relocate the underground waste storage areas of the repository to the south

Environmental analysis by electrochemical sensors and biosensors fundamentals

CERN Document Server

Moretto, Ligia Maria

2014-01-01

This book presents an exhaustive overview of electrochemical sensors and biosensors for the analysis and monitoring of the most important analytes in the environmental field, in industry, in treatment plants and in environmental research. The chapters give the reader a comprehensive, state-of-the-art picture of the field of electrochemical sensors suitable to environmental analytes, from the theoretical principles of their design to their implementation, realization and application. The first three chapters discuss fundamentals, and the last three chapters cover the main groups of analytes of environmental interest.

Metal speciation: survey of environmental methods of analysis

Energy Technology Data Exchange (ETDEWEB)

Mach, M.H.; Nott, B.; Scott, J.W.; Maddalone, R.F.; Whiddon, N.T. [TRW, Redondo Beach, CA (United States). Chemistry Technology Dept.

1996-07-01

As part of a recent task under the EPRI Analytical Methods Qualification Program (RP 1851), TRW has surveyed the methods available for monitoring metal species in typical utility aqueous discharge streams. Methods for determining the individual species of these metals can become important in a regulatory sense as the EPA transitions to assessment of environmental risk based on bioavailability. For example, EPA considers methyl mercury and Cr(VI) much more toxic to the aquatic environment than inorganic mercury or Cr(III). The species of a given element can also differ in their transport and bioaccumulation. Methods for speciation generally include a selective separation step followed by standard metals analysis. Speciation, therefore, is mainly derived from the separation step and not from the method of final quantisation. Examples of separation/analysis include: selective extraction followed by graphite furnace atomic absorption or ICP-MS; separation by GC followed by metals detection; chelation and/or direct separation by LC followed by UV measurement or metals detection; and ion chromatography with conductivity, UV, or metals detection. There are a number of sampling issues associated with metal species such as stabilization (maintaining oxidation state), absorption, and filtration that need to be addressed in order to obtain and maintain a representative sample for analysis. 45 refs., 1 tab.

Analysis of Environmental Carrying Capacity with Emergy Perspective of Jeju Island

Directory of Open Access Journals (Sweden)

Chanhoon Jung

2018-05-01

Full Text Available Jeju Island experienced an approximately 42% increase in energy consumption from 2006 to 2015 and the demand for energy consumption is expected to continue to increase. Thus, Jeju Island is planning a project entitled “Carbon Free Island by 2030” to promote sustainable development and is required to estimate the environmental carrying capacity for future energy demand changes. The purpose of this study was to calculate the emergy inherent in Jeju Island’s energy, materials, and information in 2015 using the emergy analysis method and local characteristics. In addition, this study aimed to estimate the emergy indices to evaluate the environmental carrying capacity for sustainable development in 2005, 2015, and 2030 considering the future energy demand. This study’s outputs provide the environmental carrying capacity with emergy indices, such as the percent renewable (%Renew, emergy yield ratio (EYR, environmental loading ratio (ELR, sustainability index (SI, and carrying capacity of the population (CCP for social and economic activities on Jeju Island, which are expected to be saturated. These findings show regions with heavy tourism require development strategies, including the concept of environmental carrying capacity.

Multi-element analysis for environmental characterization and its future trends

International Nuclear Information System (INIS)

Sansoni, B.

1987-04-01

Before starting to characterize the environment by its elemental composition, it may be useful to ask about the objective of these efforts. This includes questions about the scope of environmental protection, the definition of the environment and the limitations of its characterization by elemental composition alone. In the second part of this lecture, examples are given of the elemental composition of well analysed samples from the atmosphere, hydrosphere, lithosphere and biosphere. The third part introduces the principle of multi-element analysis and the fourth part gives examples. Finally, future aspects of modern chemical analysis are outlined with respect to the multi-element principle. (orig.)

32 CFR 989.12 - AF Form 813, Request for Environmental Impact Analysis.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false AF Form 813, Request for Environmental Impact... FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.12 AF Form 813, Request for Environmental Impact Analysis. The Air Force uses AF Form 813 to document the need for...

Analysis of the environmental and economic indicators of the industrial enterprise

Science.gov (United States)

Mikhailov, V. G.; Kiseleva, T. V.

2018-05-01

In the paper the features of the analysis of the environmental and economic indicators of the industrial enterprise are considered. The purpose of the study is to improve the system of environmental and economic analysis at the enterprise for more accurate forecasting of its main environmental and economic indicators. The study of the main approaches to the implementation of environmental and economic analysis based on the corresponding systems of indicators with identification of the most significant factors was carried out. The main result of the study is the choice of a system for analyzing the environmental and economic indicators, maximally oriented to a specific enterprise, taking into account its production specific features. The practical significance of the study consists in the selection of an adequate system of indicators at enterprises to improve the effectiveness from preparation of an environmentally safe management decision.

Evaluating the reproducibility of environmental radioactivity monitoring data through replicate sample analysis

International Nuclear Information System (INIS)

Lindeken, C.L.; White, J.H.; Silver, W.J.

1978-01-01

At the Lawrence Livermore Laboratory, about 10% of the sampling effort in the environmental monitoring program represents replicate sample collection. Replication of field samples was initiated as part of the quality assurance program for environmental monitoring to determine the reproducibility of environmental measurements. In the laboratory these replicates are processed along with routine samples. As all components of variance are included in analysis of such field samples, comparison of the analytical data from replicate analyses provides a basis for estimating the overall reproducibility of the measurements. The replication study indicates that the reproducibility of environmental radioactivity monitoring data is subject to considerably more variability than is indicated by the accompanying counting errors. The data are also compared with analyses of duplicate aliquots from a well mixed sample or with duplicate aliquots of samples with known radionuclide content. These comparisons show that most of the variability is associated with the collection and preparation of the sample rather than with the analytical procedures

Integrating health and environmental impact analysis

DEFF Research Database (Denmark)

Reis, S; Morris, G.; Fleming, L. E.

2015-01-01

which addresses human activity in all its social, economic and cultural complexity. The new approach must be integral to, and interactive, with the natural environment. We see the continuing failure to truly integrate human health and environmental impact analysis as deeply damaging, and we propose...... while equally emphasizing the health of the environment, and the growing calls for 'ecological public health' as a response to global environmental concerns now suffusing the discourse in public health. More revolution than evolution, ecological public health will demand new perspectives regarding...... the interconnections among society, the economy, the environment and our health and well-being. Success must be built on collaborations between the disparate scientific communities of the environmental sciences and public health as well as interactions with social scientists, economists and the legal profession...

Environmental context-dependent memory: a review and meta-analysis.

Science.gov (United States)

Smith, S M; Vela, E

2001-06-01

To address questions about human memory's dependence on the coincidental environmental contexts in which events occur, we review studies of incidental environmental context-dependent memory in humans and report a meta-analysis. Our theoretical approach to the issue stems from Glenberg's (1997) contention that introspective thought (e.g., remembering, conceptualizing) requires cognitive resources normally used to represent the immediate environment. We propose that if tasks encourage processing of noncontextual information (i.e., introspective thought) at input and/or at test, then both learning and memory will be less dependent on the ambient environmental contexts in which those activities occur. The meta-analysis showed that across all studies, environmental context effects were reliable, and furthermore, that the use of noncontextual cues during learning (overshadowing) and at test (outshining), as well as mental reinstatement of appropriate context cues at test, all reduce the effect of environmental manipulations. We conclude that environmental context-dependent memory effects are less likely to occur under conditions in which the immediate environment is likely to be suppressed.

Fort Calhoun Station, Unit 1. Annual operation report: January-December 1977 (including environmental report)

International Nuclear Information System (INIS)

1978-02-01

Net electrical energy generated in 1977 was 2,922,683.7 MWH with the generator on line 6,959.8 hours. Information is presented concerning operations, power generation, shutdowns, maintenance, changes, tests, experiments, occupational personnel radiation exposures, and primary coolant chemistry. Data on radioactive effluent releases, meteorology, environmental monitoring, and potential radiation doses to individuals for July 7, 1977 to December 31, 1977 are also included

Environmental analysis of closure options for waste sites at the Savannah River Plant

International Nuclear Information System (INIS)

Gordon, D.E.; King, C.M.; Looney, B.B.; Stephenson, D.E.; Johnson, W.F.

1987-01-01

Previously acceptable waste management practices (e.g., the use of unlined seepage basins) for discarding of wastes from nuclear materials production has resulted in occasional cases of groundwater contamination beneath some disposal sites, mainly in water-table aquifers. Groundwater contaminants include volatile organic compounds, heavy metals, radionuclides, and other chemicals. The closure of active and inactive waste sites that have received hazardous and/or low-level radioactive materials at the Savannah River Plant (SRP) is planned as part of an overall program to protect groundwater quality. DOE developed and submitted to Congress a groundwater protection plan for SRP. This initial plan and subsequent revisions provide the basis for closure of SRP waste sites to comply with applicable groundwater protection requirements. An environmental analysis of the closure options for the criteria waste sites that have received hazardous and/or low-level radioactive wastes was conducted to provide technical support. The several parts of this environmental analysis include description of geohydrologic conditions; determination of waste inventories; definition of closure options; modeling of environmental pathways; assessment of risk; and analysis of project costs. Each of these components of the overall analysis is described in turn in the following paragraphs. Production operations at SRP have generated a variety of solid, hazardous, and low-level radioactive waste materials. Several locations onplant have been used as waste disposal sites for solid and liquid wastes. Seventy-six individual waste sites at 45 distinct geographical locations on SRP have received hazardous, low-level radioactive, or mixed wastes. These waste sites can be categorized into 26 groupings according to the function of the waste disposed. 15 refs., 6 figs., 5 tabs

Environmental analysis of the operation of Oak Ridge National Laboratory (X-10 site)

Energy Technology Data Exchange (ETDEWEB)

Boyle, J.W.; Blumberg, R.; Cotter, S.J.

1982-11-01

An environmental analysis of the operation of the Oak Ridge National Laboratory (ORNL) facilities in Bethel Valley and Melton Valley was conducted to present to the public information concerning the extent to which recognizable effects, or potential effects, on the environment may occur. The analysis addresses current operations of the ORNL X-10 site and completed operations that may continue to have residual effects. Solid wastes from ORNL operations at the Y-12 site which are transported to the X-10 site for burial (e.g., Biology Division animal wastes) are included as part of X-10 site operation. Socioeconomic effects are associated primarily with the communities where employees live and with the Knoxville Bureau of Economic Analysis economic area as a whole. Therefore, ORNL employees at both Y-12 and X-10 sites are included in the ORNL socioeconomic impact analysis. An extensive base of environmental data was accumulated for this report. Over 80 reports related to ORNL facilities and/or operations are cited as well as many open-literature citations. Environmental effects of the operation of ORNL result from operational discharges from the onsite facilities; construction and/or modification of facilities, transportation to and from the site of persons, goods and services; socioeconomic impacts to the local, regional, and general population; and accidental discharges if they should occur. Operational discharges to the environnment are constrained by federal, state, and local regulations and by criteria established by the US Department of Energy to minimize adverse impacts. It is the purpose of this document to evaluate the operation of the ORNL insofar as impacts beyond the site boundary may occur or have the potential for occurrence.

Environmental analysis of the operation of Oak Ridge National Laboratory (X-10 site)

International Nuclear Information System (INIS)

Boyle, J.W.; Blumberg, R.; Cotter, S.J.

1982-11-01

An environmental analysis of the operation of the Oak Ridge National Laboratory (ORNL) facilities in Bethel Valley and Melton Valley was conducted to present to the public information concerning the extent to which recognizable effects, or potential effects, on the environment may occur. The analysis addresses current operations of the ORNL X-10 site and completed operations that may continue to have residual effects. Solid wastes from ORNL operations at the Y-12 site which are transported to the X-10 site for burial (e.g., Biology Division animal wastes) are included as part of X-10 site operation. Socioeconomic effects are associated primarily with the communities where employees live and with the Knoxville Bureau of Economic Analysis economic area as a whole. Therefore, ORNL employees at both Y-12 and X-10 sites are included in the ORNL socioeconomic impact analysis. An extensive base of environmental data was accumulated for this report. Over 80 reports related to ORNL facilities and/or operations are cited as well as many open-literature citations. Environmental effects of the operation of ORNL result from operational discharges from the onsite facilities; construction and/or modification of facilities, transportation to and from the site of persons, goods and services; socioeconomic impacts to the local, regional, and general population; and accidental discharges if they should occur. Operational discharges to the environnment are constrained by federal, state, and local regulations and by criteria established by the US Department of Energy to minimize adverse impacts. It is the purpose of this document to evaluate the operation of the ORNL insofar as impacts beyond the site boundary may occur or have the potential for occurrence

Dynamic response of infrastructure to environmentally induced loads analysis, measurements, testing, and design

CERN Document Server

Manolis, George

2017-01-01

This book provides state of the art coverage of important current issues in the analysis, measurement, and monitoring of the dynamic response of infrastructure to environmental loads, including those induced by earthquake motion and differential soil settlement. The coverage is in five parts that address numerical methods in structural dynamics, soil–structure interaction analysis, instrumentation and structural health monitoring, hybrid experimental mechanics, and structural health monitoring for bridges. Examples that give an impression of the scope of the topics discussed include the seismic analysis of bridges, soft computing in earthquake engineering, use of hybrid methods for soil–structure interaction analysis, effects of local site conditions on the inelastic dynamic analysis of bridges, embedded models in wireless sensor networks for structural health monitoring, recent developments in seismic simulation methods, and seismic performance assessment and retrofit of structures. Throughout, the empha...

Applications of capillary electrophoresis with chemiluminescence detection in clinical, environmental and food analysis. A review

International Nuclear Information System (INIS)

Lara, Francisco J.; Airado-Rodríguez, Diego; Moreno-González, David; Huertas-Pérez, José F.; García-Campaña, Ana M.

2016-01-01

This paper reviews the latest developments and analytical applications of chemiluminescence detection coupled to capillary electrophoresis (CE-CL). Different sections considering the most common CL systems have been included, such as the tris(2,2′-bipyridine)ruthenium(II) system, the luminol and acridinium derivative reactions, the peroxyoxalate CL or direct oxidations. Improvements in instrumental designs, new strategies for improving both resolution and sensitivity, and applications in different fields such as clinical, pharmaceutical, environmental and food analysis have been included. This review covers the literature from 2010 to 2015. - Highlights: • An up-to-date critical review about the evolution of CE-CL is presented. • Tris(2,2′-bipyridine)ruthenium(II) and luminol as the most used CL systems. • Instrumental designs and strategies for improving resolution and sensitivity. • Applications in clinical, pharmaceutical, environmental and food analysis.

The environmental footprint of a membrane bioreactor treatment process through Life Cycle Analysis

Energy Technology Data Exchange (ETDEWEB)

Ioannou-Ttofa, L.; Foteinis, S. [Nireas-International Water Research Center, University of Cyprus, P.O. Box 20537, CY-1678 Nicosia (Cyprus); Chatzisymeon, E. [Institute for Infrastructure and Environment, School of Engineering, University of Edinburgh, Edinburgh EH9 3JL (United Kingdom); Fatta-Kassinos, D., E-mail: dfatta@ucy.ac.cy [Nireas-International Water Research Center, University of Cyprus, P.O. Box 20537, CY-1678 Nicosia (Cyprus); Department of Civil Engineering and Environmental Engineering, University of Cyprus, P.O. Box 20537, CY-1678 Nicosia (Cyprus)

2016-10-15

This study includes an environmental analysis of a membrane bioreactor (MBR), the objective being to quantitatively define the inventory of the resources consumed and estimate the emissions produced during its construction, operation and end-of-life deconstruction. The environmental analysis was done by the life cycle assessment (LCA) methodology, in order to establish with a broad perspective and in a rigorous and objective way the environmental footprint and the main environmental hotspots of the examined technology. Raw materials, equipment, transportation, energy use, as well as air- and waterborne emissions were quantified using as a functional unit, 1 m{sup 3} of urban wastewater. SimaPro 8.0.3.14 was used as the LCA analysis tool, and two impact assessment methods, i.e. IPCC 2013 version 1.00 and ReCiPe version 1.10, were employed. The main environmental hotspots of the MBR pilot unit were identified to be the following: (i) the energy demand, which is by far the most crucial parameter that affects the sustainability of the whole process, and (ii) the material of the membrane units. Overall, the MBR technology was found to be a sustainable solution for urban wastewater treatment, with the construction phase having a minimal environmental impact, compared to the operational phase. Moreover, several alternative scenarios and areas of potential improvement, such as the diversification of the electricity mix and the material of the membrane units, were examined, in order to minimize as much as possible the overall environmental footprint of this MBR system. It was shown that the energy mix can significantly affect the overall sustainability of the MBR pilot unit (i.e. up to 95% reduction of the total greenhouse gas emissions was achieved with the use of an environmentally friendly energy mix), and the contribution of the construction and operational phase to the overall environmental footprint of the system. - Highlights: • The environmental sustainability of

The reliability of mercury analysis in environmental materials

International Nuclear Information System (INIS)

Heinonen, J.; Suschny, O.

1973-01-01

Mercury occurs in nature in its native elemental as well as in different mineral forms. It has been mined for centuries and is used in many branches of industry, agriculture and medicine. Mercury is very toxic to man and reports of poisoning due to the presence of the element in fish and shellfish caught at Minamata and Niigata, Japan have led not only to local investigations but to multi-national research into the sources and the levels of mercury in the environment. The concentrations at which the element has to be determined in these studies are extremely small, usually of the order of a few parts in 10 9 parts of environmental material. Few analytical techniques provide the required sensitivity for analysis at such low concentrations, and only two are normally used for mercury: neutron activation analysis and atomic absorption photometry. They are also the most convenient end points of various separation schemes for different organic mercury compounds. Mercury analysis at the ppb-level is beset with many problems: volatility of the metal and its compounds, impurity of reagents, interference by other elements and many other analytical difficulties may influence the results. To be able to draw valid conclusions from the analyses it is necessary to know the reliability attached to the values obtained. To assist laboratories in the evaluation of their analytical performance, the International Atomic Energy Agency through its own laboratory at Seibersdorf already organised in 1967 an intercomparison of mercury analysis in flour. Based on the results obtained at that time, a whole series of intercomparisons of mercury determinations in nine different environmental materials was undertaken in 1971. The materials investigated included corn and wheat flour, spray-dried animal blood serum, fish solubles, milk powder, saw dust, cellulose, lacquer paint and coloric material

The reliability of mercury analysis in environmental materials

Energy Technology Data Exchange (ETDEWEB)

Heinonen, J.; Suschny, O

1973-01-01

Mercury occurs in nature in its native elemental as well as in different mineral forms. It has been mined for centuries and is used in many branches of industry, agriculture and medicine. Mercury is very toxic to man and reports of poisoning due to the presence of the element in fish and shellfish caught at Minamata and Niigata, Japan have led not only to local investigations but to multi-national research into the sources and the levels of mercury in the environment. The concentrations at which the element has to be determined in these studies are extremely small, usually of the order of a few parts in 10{sup 9} parts of environmental material. Few analytical techniques provide the required sensitivity for analysis at such low concentrations, and only two are normally used for mercury: neutron activation analysis and atomic absorption photometry. They are also the most convenient end points of various separation schemes for different organic mercury compounds. Mercury analysis at the ppb-level is beset with many problems: volatility of the metal and its compounds, impurity of reagents, interference by other elements and many other analytical difficulties may influence the results. To be able to draw valid conclusions from the analyses it is necessary to know the reliability attached to the values obtained. To assist laboratories in the evaluation of their analytical performance, the International Atomic Energy Agency through its own laboratory at Seibersdorf already organised in 1967 an intercomparison of mercury analysis in flour. Based on the results obtained at that time, a whole series of intercomparisons of mercury determinations in nine different environmental materials was undertaken in 1971. The materials investigated included corn and wheat flour, spray-dried animal blood serum, fish solubles, milk powder, saw dust, cellulose, lacquer paint and coloric material.

Environmental assessment of Swedish agriculture

International Nuclear Information System (INIS)

Engstroem, Rebecka; Finnveden, Goeran; Wadeskog, Anders

2007-01-01

This article describes an environmental assessment of Swedish agriculture, including upstream and downstream effects. The analysis is based on environmentally extended input-output analysis, but it is also supplemented with data from other sources. The analysis shows that direct effects by the Swedish agriculture are the most important, while indirect effects from other sources including mobile and impacts abroad are also considerable. The most important impacts from Swedish agriculture according to the analysis are eutrophication, global warming and resource use. The agricultural sector produces a large share of the Swedish emissions causing both global warming and eutrophication. In addition, current agricultural practice causes problems with loss of biodiversity. The most important actors in the sector are agriculture itself, but also all actors using fossil fuels: primarily the transport sector and the energy sector. In addition, consumers are important since they can influence the composition of agricultural production. The analysis shows the importance of including upstream and downstream effects when analysing the environmental impacts from a sector. (author)

Applications of neutron activation analysis in determination of natural and man-made radionuclides, including PA-231

Science.gov (United States)

Byrne, A. R.; Benedik, L.

1999-01-01

Neutron activation analysis (NAA), being essentially an isotopic and not an elemental method of analysis, is capable of determining a number of important radionuclides of radioecological interest by transformation into another, more easily quantifiable radionuclide. The nuclear characteristics which favour this technique may be summarized in an advantage factor relative to radiometric analysis of the original radioanalyte. Well known or hardly known examples include235U,238U,232Th,230Th,129I,99Tc,237Np and231Pa; a number of these are discussed and illustrated in analysis of real samples of environmental and biological origin. In particular, determination of231Pa by RNAA was performed using both postirradiation and preseparation methods. Application of INAA to enable the use of238U and232Th as endogenous (internal) radiotracers in alpha spectrometric analyses of uranium and thorium radioisotopes in radioecological studies is described, also allowing independent data sets to be obtained for quality control.

Transuranium analysis methodologies for biological and environmental samples

International Nuclear Information System (INIS)

Wessman, R.A.; Lee, K.D.; Curry, B.; Leventhal, L.

1978-01-01

Analytical procedures for the most abundant transuranium nuclides in the environment (i.e., plutonium and, to a lesser extent, americium) are available. There is a lack of procedures for doing sequential analysis for Np, Pu, Am, and Cm in environmental samples, primarily because of current emphasis on Pu and Am. Reprocessing requirements and waste disposal connected with the fuel cycle indicate that neptunium and curium must be considered in environmental radioactive assessments. Therefore it was necessary to develop procedures that determine all four of these radionuclides in the environment. The state of the art of transuranium analysis methodology as applied to environmental samples is discussed relative to different sample sources, such as soil, vegetation, air, water, and animals. Isotope-dilution analysis with 243 Am ( 239 Np) and 236 Pu or 242 Pu radionuclide tracers is used. Americium and curium are analyzed as a group, with 243 Am as the tracer. Sequential extraction procedures employing bis(2-ethyl-hexyl)orthophosphoric acid (HDEHP) were found to result in lower yields and higher Am--Cm fractionation than ion-exchange methods

Environmental analysis of geopressured-geothermal prospect areas, De Witt and Colorado counties, Texas. Final report, March 1 - August 31, 1979

Energy Technology Data Exchange (ETDEWEB)

Gustavson, T.C.; Reeder, F.S.; Badger, E.A.

1980-02-01

Information collected and analyzed for a preliminary environmental analysis of geopressured geothermal prospect areas in Colorado and DeWitt Counties, Texas is presented. Specific environmental concerns for each geopressured geothermal prospect area are identified and discussed. Approximately 218 km/sup 2/(85 mi/sup 2/) were studied in the vicinity of each prospect area to: (1) conduct an environmental analysis to identify more and less suited areas for geopressured test wells; and (2) provide an environmental data base for future development of geopressured geothermal energy resources. A series of maps and tables are included to illustrate environmental characteristics including: geology, water resources, soils, current land use, vegetation, wildlife, and meteorological characteristics, and additional relevant information on cultural resources, power- and pipelines, and regulatory agencies. A series of transparent overlays at the scale of the original mapping has also been produced for the purposes of identifying and ranking areas of potential conflict between geopressured geothermal development and environmental characteristics. The methodology for ranking suitability of areas within the two prospect areas is discussed in the appendix. (MHR)

Computer system for environmental sample analysis and data storage and analysis

International Nuclear Information System (INIS)

Brauer, F.P.; Fager, J.E.

1976-01-01

A mini-computer based environmental sample analysis and data storage system has been developed. The system is used for analytical data acquisition, computation, storage of analytical results, and tabulation of selected or derived results for data analysis, interpretation and reporting. This paper discussed the structure, performance and applications of the system

Analysis procedure for americium in environmental samples

International Nuclear Information System (INIS)

Holloway, R.W.; Hayes, D.W.

1982-01-01

Several methods for the analysis of 241 Am in environmental samples were evaluated and a preferred method was selected. This method was modified and used to determine the 241 Am content in sediments, biota, and water. The advantages and limitations of the method are discussed. The method is also suitable for 244 Cm analysis

Factor Analysis on the Factors that Influencing Rural Environmental Pollution in the Hilly Area of Sichuan Province,China

Institute of Scientific and Technical Information of China (English)

2011-01-01

By using factor analysis method and establishing analysis indicator system from four aspects including crop production,poultry farming,rural life and township enterprises,the difference,features,and types of factors influencing the rural environmental pollution in the hilly area in Sichuan Province,China.Results prove that the major factor influencing rural environmental pollution in the study area is livestock and poultry breeding,flowed by crop planting,rural life,and township enterprises.Hence future pollution prevention and control should set about from livestock and poultry breeding.Meanwhile,attention should be paid to the prevention and control of rural environmental pollution caused by rural life and township enterprise production.

Applied research of environmental monitoring using instrumental neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Chung, Young Sam; Moon, Jong Hwa; Chung, Young Ju

1997-08-01

This technical report is written as a guide book for applied research of environmental monitoring using Instrumental Neutron Activation Analysis. The contents are as followings; sampling and sample preparation as a airborne particulate matter, analytical methodologies, data evaluation and interpretation, basic statistical methods of data analysis applied in environmental pollution studies. (author). 23 refs., 7 tabs., 9 figs.

An analysis of students’ cognitive structures in relation to their environmental sensitivity

Directory of Open Access Journals (Sweden)

Gercek Cem

2017-01-01

Full Text Available One of the basic aims of environment-related subjects included in the biology curriculum is to raise environmental awareness. Yet, the fact that the concepts taught especially in the context of environmental issues are abstract influences meaningful learning. This, in turn, influences behaviours displayed. Exhibiting students’ cognitive structures in assuring effective and meaningful concept teaching increases the importance of studies conducted. Unavailability of studies in the literature analysing students’ cognitive structures in relation to their sensitivity to the environment demonstrates the importance of this current study. This study aims to analyse students’ cognitive structures in relation to their environmental sensitivity. The study employs survey model- one of the qualitative research designs. The study group was composed of 56 high school students in the 2016-2017 academic year. The study group was formed through purposeful sampling. Word Association Test (WAT was prepared in order to uncover students’ cognitive structures in relation to their environmental sensitivity. Having transcribed the data obtained, they were put to content analysis and were transferred to the medium of computer. The results showed that students’ cognitive structure concerning their environmental sensitivity was divided into categories.

Environmental chemistry. Seventh edition

Energy Technology Data Exchange (ETDEWEB)

Manahan, S.E. [Univ. of Missouri, Columbia, MO (United States)

1999-11-01

This book presents a basic understanding of environmental chemistry and its applications. In addition to providing updated materials in this field, the book emphasizes the major concepts essential to the practice of environmental chemistry. Topics of discussion include the following: toxicological chemistry; toxicological chemistry of chemical substances; chemical analysis of water and wastewater; chemical analysis of wastes and solids; air and gas analysis; chemical analysis of biological materials and xenobiotics; fundamentals of chemistry; and fundamentals of organic chemistry.

BENEFIT-COST ANALYSIS IN U.S. ENVIRONMENTAL REGULATORY DECISIONS

OpenAIRE

Easter, K. William; Archibald, Sandra O.

1998-01-01

As the number and cost of environmental regulations have increased over the last thirty years, the regulated community, taxpayers, and policy makers have begun to demand that the benefits of regulations justify their costs. The use of benefit-cost analysis as an integral part of developing new regulations is increasing and the demands and expectations being placed on the method have expanded. Although benefit-cost analysis is expected to play an even greater role in environmental decision mak...

ICP-MS applications for the analysis of geological materials and environmental samples

International Nuclear Information System (INIS)

Bendl, J.

1997-01-01

This work deals with applications of inductively coupled plasma - mass spectrometry applications for the analysis of geological materials and environmental samples. There are instrumentation, calibration, alternatives of sample introduction, interferences, trace elements analysis, rare earth elements and uranium and thorium, precious metals, isotopic analysis and environmental analysis discussed

o-TOF ICPMS analysis of environmental, food and biological samples

International Nuclear Information System (INIS)

Krejcova, A.; Cernohorsky, T.; Ludvikova, I.; Pouzar, M.; Capova, L.

2009-01-01

Full text: o-TOF ICPMS was used for inorganic analysis of environmental, food and biological samples. The method validity was proved by analysis of spiked samples, reference materials, by determination without/with internal standards and the standard addition technique. The technique was shown to be powerful, and reliable for analysis of the samples mentioned, and high sample throughput enables environmental or biological screening studies. Independent of the number of elements analyzed, complete analysis and whole mass spectra are gained from a small sample amount in a very short time. (author)

Towards a more efficient environmental policy. A socio-economic analysis of four persistent environmental problems

International Nuclear Information System (INIS)

2000-11-01

For the benefit of the National Environmental Policy Plan that will be published in 2001, the Netherlands Bureau for Economic Policy Analysis analysed four persistent environmental problems. These problems are the environmental effects of the manure surplus in the agricultural sector; the climate problem; the acidification by traffic and the air traffic noise around the airport Schiphol. This study not only looks ahead, but also looks back on 30 years of environmental policy. From a welfare economic perspective an analysis is made of the efficiency and effectiveness of that policy. Several questions are answered,e.g.: how could the manure problem of such a small sector as the livestock breeding persist for so many years?; how effective were the agreements with the industry and other sectors on energy efficiency improvement?; what made the acidification policy directed on traffic so successful?; why is the noise production of air traffic still a problem whereas the number of seriously bothered houses is decreased? The answers on these questions provide information which can be useful for the formulation of the future environmental policy. This information refers to the conditions for formulating adequate policy goals, the relation between those goals and policy instruments and the differences between direct versus indirect steering. This report also gives some points of interest for tackling complex international environmental problems. refs

Hydrazine reagents as derivatizing agents in environmental analysis--a critical review.

Science.gov (United States)

Vogel, M; Büldt, A; Karst, U

2000-04-01

Hydrazine reagents are a well-known group of derivatizing agents for the determination of aldehydes and ketones in liquid and gaseous samples. Within this article, the most important hydrazine reagents are critically summarized, and their major applications in different fields, including environmental analysis, food chemistry and industrial analysis are introduced. As 2,4-dinitrophenylhydrazine (DNPH) is the basic reagent for several international standard procedures, its properties are discussed in detail. Particular focus is directed on the chemistry of the hydrazine reagents, and chemical interferences are considered. Recent methods for the determination of various oxidants using hydrazine reagents are presented as well. Due to limited space, this review does not cover the related field of carbohydrate analysis, although many chemical aspects are similar.

Genotypic and phenotypic diversity of Ralstonia pickettii and Ralstonia insidiosa isolates from clinical and environmental sources including High-purity Water.

LENUS (Irish Health Repository)

Ryan, Michael P

2011-08-30

Abstract Background Ralstonia pickettii is a nosocomial infectious agent and a significant industrial contaminant. It has been found in many different environments including clinical situations, soil and industrial High Purity Water. This study compares the phenotypic and genotypic diversity of a selection of strains of Ralstonia collected from a variety of sources. Results Ralstonia isolates (fifty-nine) from clinical, industrial and environmental origins were compared genotypically using i) Species-specific-PCR, ii) PCR and sequencing of the 16S-23S rRNA Interspatial region (ISR) iii) the fliC gene genes, iv) RAPD and BOX-PCR and v) phenotypically using biochemical testing. The species specific-PCR identified fifteen out of fifty-nine designated R. pickettii isolates as actually being the closely related species R. insidiosa. PCR-ribotyping of the 16S-23S rRNA ISR indicated few major differences between the isolates. Analysis of all isolates demonstrated different banding patterns for both the RAPD and BOX primers however these were found not to vary significantly. Conclusions R. pickettii species isolated from wide geographic and environmental sources appear to be reasonably homogenous based on genotypic and phenotypic characteristics. R. insidiosa can at present only be distinguished from R. pickettii using species specific PCR. R. pickettii and R. insidiosa isolates do not differ significantly phenotypically or genotypically based on environmental or geographical origin.

OCEAN THERMAL ENERGY CONVERSION (OTEC) PROGRAMMATIC ENVIRONMENTAL ANALYSIS

Energy Technology Data Exchange (ETDEWEB)

Sands, M. D.

1980-01-01

This programmatic environmental analysis is an initial assessment of OTEC technology considering development, demonstration and commercialization; it is concluded that the OTEC development program should continue because the development, demonstration, and commercialization on a single-plant deployment basis should not present significant environmental impacts. However, several areas within the OTEC program require further investigation in order to assess the potential for environmental impacts from OTEC operation, particularly in large-scale deployments and in defining alternatives to closed-cycle biofouling control: (1) Larger-scale deployments of OTEC clusters or parks require further investigations in order to assess optimal platform siting distances necessary to minimize adverse environmental impacts. (2) The deployment and operation of the preoperational platform (OTEC-1) and future demonstration platforms must be carefully monitored to refine environmental assessment predictions, and to provide design modifications which may mitigate or reduce environmental impacts for larger-scale operations. These platforms will provide a valuable opportunity to fully evaluate the intake and discharge configurations, biofouling control methods, and both short-term and long-term environmental effects associated with platform operations. (3) Successful development of OTEC technology to use the maximal resource capabilities and to minimize environmental effects will require a concerted environmental management program, encompassing many different disciplines and environmental specialties.

Analysis in environmental radioactivity around Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Cho, Yong Woo; Han, Man Jung; Cho, Seong Won; Cho, Hong Jun; Oh, Hyeon Kyun; Lee, Jeong Min; Chang, Jae Sook [KORTIC, Taejon (Korea, Republic of)

2003-12-15

Twelve kinds of environmental samples such as soil, seawater, underground water, etc. around Nuclear Power Plants(NPPs) were collected. Tritium chemical analysis was tried for the samples of rain water, pine-needle, air, seawater, underground water, chinese cabbage, again of rice and milk sampled around NPPs, and surface seawater and rain water sampled over the country. Strontium in the soil that were sampled at 60 point of district in Korea were analyzed. Tritium were analyzed in 21 samples of surface seawater around the Korea peninsular that were supplied form KFRDI(National Fisheries Research and Development Institute). Sampling and chemical analysis environmental samples around Kori, Woolsung, Youngkwang, Wooljin NPPs and Taeduk science town for tritium and strontium analysis was managed according to plans. Succeed to KINS after all samples were tried.

Ash contents of foodstuff samples in environmental radioactivity analysis

International Nuclear Information System (INIS)

Oikawa, Shinji; Ohta, Hiroshi; Hayano, Kazuhiko; Nonaka, Nobuhiro

2004-01-01

Statistical data of the ash content in various environmental samples obtained from an environmental radioactivity survey project commissioned by the Japanese government of Science and Technology Agency (at present Ministry of Education, Culture, Sports, Sciences and Technology) during the past 10 years are expressed for establishing a standard of ash content in environmental samples based on radioactivity analysis. The ash content for some kinds of environmental samples such as dietary food, milk, Japanese radish, spinach, fish, green tea and potato was reviewed in the light of statistical and stochastic viewpoints. For all of the samples reviewed in this paper, the coefficient of variation varied from 4.7% for milk to 36.3% for cabbage. Dietary food and milk samples were reviewed more than 1900 and 1400 samples, respectively. Especially, ash content of dietary food depended mainly on the dietary culture reflected on the period. However it showed an almost invariant distribution within 18.7% of coefficient of variation during the past 10 years. Pretreatment of environmental samples especially ashing processes are important from the viewpoint on environmental radioactivity analysis, which is one of the especial fields in analytical chemistry. Statistical reviewed data obtained in this paper may be useful for sample preparation. (author)

Meta-analysis of scientific publications hei with brazilian environmental management system

Directory of Open Access Journals (Sweden)

Alexandre André Feil

2015-02-01

Full Text Available The Higher Education Institutions (HEIs are being pressured by changes towards sustainability and thus awakening to environmental management, they are considered as a leader in promoting sustainability through actions and environmental management practices. Following this logic, this study aims to identify the environmental management practices used in Brazilian HEIs and correlations exist that influence the implementation of Environmental Management Systems (EMS. The quantitative approach is applied through documentary research with secondary data published in proceedings, journals, books and portal Scientific Electronic Library (SciELO. The data analysis occurred through meta-analysis using descriptive statistics and Spearman correlation. The results of 34 scientific studies 23 IES referencing models and practices of waste management published from 2001 to 2012 were identified. The Spearman correlation analysis expressed that HEIs with programs in environmental education performed better ranking General Index of Courses. It is recommended that HEIs that have a waste management deployed, share your experience through scientific publications to disseminate their adaptation practices regarding the SGA.

Environmental analysis burial of offsite low-level waste at SRP

International Nuclear Information System (INIS)

Poe, W.L.; Moyer, R.A.

1980-12-01

The environmental effects of receipt and burial of low-level naval waste generated at Department of Energy Laboratories are assessed in this environmental analysis. Through 1979, this low-level DOE waste was sent to the NRC-licensed burial ground operated by Chem-Nuclear Systems, Inc., at Barnwell, South Carolina. DOE announced on October 26, 1979, that DOE-generated low-level waste would no longer be buried at commercial waste burial sites. SRP was selected to receive the naval waste described in this analysis. Receipt and burial of these wastes will have a negligible effect on SRP's environment and increase only slightly the environmental effects of the SRP operations discussed in the EIS on SRP waste management operations. The environmental effects of burial of this waste at Chem-Nuclear Burial Ground or at the SRP Burial Ground are described in this environmental analysis to permit assessment of incremental effects caused by the decision to bury this naval waste in the SRP Burial Ground rather than in the Barnwell Burial Ground. The radiological effects from burial of this waste in either the SRP or Chem-Nuclear Burial Ground are very small when compared to those from natural background radiation or to the annual population dose commitment from operation of SRP. The environmental effects of burial at SRP to dose commitments normally received by the population surrounding SRP are compared

Environmental impact analysis of electric and hybrid vehicle batteries. Final report

Energy Technology Data Exchange (ETDEWEB)

1977-12-16

This environmental impact analysis of electric and hybrid vehicle batteries is intended to identify principal environmental impacts resulting directly or indirectly from the development of electric vehicle batteries. Thus, the result of this study could be used to determine the appropriate following step in the U.S. DOE's EIA process. The environmental impacts considered in this document are the incremental impacts generated during the various phases in the battery life cycle. The processes investigated include mining, milling, smelting, and refining of metallic materials for electrode components; manufacturing processes of inorganic chemicals and other materials for electrolytes and other hardware components; battery assembly processes; operation and maintenance of batteries; and recycling and disposal of used batteries. The severity of the incremental impacts is quantified to the extent consistent with the state-of-knowledge. Many of the industrial processes involve proprietary or patent information; thus, in many cases, the associated environmental impacts could not be determined. In addition, most candidate battery systems are still in the development phase. Thus, the manufacturing and recycling processes for most battery systems either have not been developed by industry, or the information is not available. For these cases, the associated environmental impact evaluations could only be qualitative, and the need for further investigations is indicated. 26 figures, 27 tables. (RWR)

Environmental costs and reverse logistics: a systemic analysis

Directory of Open Access Journals (Sweden)

Paula de Souza

2013-08-01

Full Text Available This article aims to analyze the articles most relevant to the themes inherent environmental costs from the perspective of reverse logistics, identifying gaps for these two approaches through systemic analysis. In order to achieve the purpose of this article, the intervention instrument used was ProKnow-C (Knowledge Process Development - Constructivist. The application of this methodology resulted in gross bank of articles, comprising 1225 items obtained from four international databases: Science Direct, ISI Web of Science, Scopus and Wiley Online Library. The raw bank was filtered in relation to redundancy, the alignment of the title and the scientific relevance. The filtering had resulted in a set of 15 articles aligned with two axes of research. The analysis of the selected articles identified the most cited article and the author most cited, concluding that the issue environmental costs associated with reverse logistics is studied by several authors and universities. Moreover, it was found that the keyword most presented in the articles was reverse logistics. The analysis of 1117 references of the 15 articles has shown the most cited articles, as well as the most countrast journals and academic relevance of authors and their selected articles. A systemic analysis of the 15 selected articles showed that the two lines of research are related mainly to issues of environmental sustainability, competitiveness and business efficiency.

Environmental system analysis of tomato production in Ghana ...

African Journals Online (AJOL)

The aim of this study was to identify the most important sources of greenhouse gases, acidifying and eutrophying compounds associated with tomato production in Ghana and identify options to reduce the environmental impacts. Life Cycle Analysis (LCA) methodology was used in the analysis (Cradle to gate approach).

Analysis of Corporate Environmental Management: Methodological Aspects

DEFF Research Database (Denmark)

Madsen, Henning; Ulhøi, John Parm

2001-01-01

in business presents a challenge to management, however, since it implies a fundamental change in some of the ways of operating a company. This paper will briefly discuss how information on the actual extent of environmental management in Danish companies and the way it is applied has been collected based......Human activities cannot avoid influencing conditions in the natural environment one way or the other. This includes as well common activities in the business sector. But during the past few decades, environmental disasters in Seveso and Bhopal, and the Exxon Valdes oil spill in Alaska have...... contributed to an increasing awareness of the effect of business activities on the physical environment. To assist companies reduce, evaluate, monitor and control their environmental impact the concept of corporate environmental and resource management has been developed. Implementation of this concept...

47 CFR 1.1311 - Environmental information to be included in the environmental assessment (EA).

Science.gov (United States)

2010-10-01

... a residential area, the EA must also address the impact of this lighting upon the residents. (2) A... concerning the proposal's environmental impact, if any. The EA shall deal specifically with any feature of... land utilized (e.g., deforestation, water diversion, wetland fill, or other extensive change of surface...

Risk analysis of environmental hazards at the High Flux Beam Reactor

International Nuclear Information System (INIS)

Boccio, J.L.; Ho, V.S.; Johnson, D.H.

1994-01-01

In the late 1980s, a Level 1 internal event probabilistic risk assessment (PRA) was performed for the High-Flux Beam Reactor (HFBR), a US Department of Energy research reactor located at Brookhaven National Laboratory. Prior to the completion of that study, a level 1 PRA for external events was initiated, including environmental hazards such as fire, internal flooding, etc. Although this paper provides a brief summary of the risks from environmental hazards, emphasis will be placed on the methodology employed in utilizing industrial event databases for event frequency determination for the HFBR complex. Since the equipment in the HFBR is different from that of, say, a commercial nuclear power plant, the current approach is to categorize the industrial events according to the hazard initiators instead of categorizing by initiator location. But first a general overview of the analysis

The environmental survey manual

International Nuclear Information System (INIS)

1987-08-01

The purpose of this manual is to provide guidance to the Survey and Sampling and Analysis teams that conduct the one-time Environmental Survey of the major US Department of Energy (DOE) operating facilities. This manual includes a discussion of DOE's policy on environmental issues, a review of statutory guidance as it applies to the Survey, the procedures and protocols to be used by the Survey teams, criteria for the use of the Survey teams in evaluating existing environmental data for the Survey effort, generic technical checklists used in every Survey, health and safety guidelines for the personnel conducting the Survey, including the identification of potential hazards, prescribed protective equipment, and emergency procedures, the required formats for the Survey reports, guidance on identifying environmental problems that need immediate attention by the Operations Office responsible for the particular facility, and procedures and protocols for the conduct of sampling and analysis

78 FR 39284 - Technical Guidance for Assessing Environmental Justice in Regulatory Analysis

Science.gov (United States)

2013-07-01

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OA-2013-0320; FRL-9830-1] Technical Guidance for Assessing Environmental Justice in Regulatory Analysis AGENCY: Environmental Protection Agency (EPA). ACTION: Notice... Environmental Protection Agency (EPA) issued for public comment a document entitled, ``Technical Guidance for...

Statistical analysis of environmental data

International Nuclear Information System (INIS)

Beauchamp, J.J.; Bowman, K.O.; Miller, F.L. Jr.

1975-10-01

This report summarizes the analyses of data obtained by the Radiological Hygiene Branch of the Tennessee Valley Authority from samples taken around the Browns Ferry Nuclear Plant located in Northern Alabama. The data collection was begun in 1968 and a wide variety of types of samples have been gathered on a regular basis. The statistical analysis of environmental data involving very low-levels of radioactivity is discussed. Applications of computer calculations for data processing are described

[Materiality Analysis of Health Plans Based on Stakeholder Engagement and the Issues Included at ISO 26000:2010].

Science.gov (United States)

Moyano Santiago, Miguel Angel; Rivera Lirio, Juana María

2017-01-18

Health plans of the Spanish autonomous communities can incorporate sustainable development criteria in its development. There have been no analysis or proposals about development and indicators. The goal is to add a contribution to help build better health plans aimed at sustainable development and help to manage economic, social and environmental impacts of health systems criteria. We used a variation of the RAND/UCLA or modified Delphi technique method. The process consisted of a bibliographical and context matters and issues related to health and social responsibility analysis based on ISO 26000: 2010. A survey by deliberately to a selection of 70 expert members of the identified stakeholders was carried out and a discussion group was held to determine the consensus on the issues addressed in the survey sample. The research was conducted in 2015. From the literature review 33 health issues included in ISO 26000:2010 were obtained. 7 survey proved relevant high consensus, 8 relevance and average consensus and 18 with less relevance and high level of dissent. The expert group excluded 4 of the 18 subjects with less consensus. 29 issues included 33 at work, divided into 7 subjects contained in the guide ISO 26000 of social responsibility, were relevant stakeholders regarding possible inclusion in health plans. Considering the direct relationship published by ISO (International Organization for Standardization) among the issues ISO 26000 and the economic, social and environmental indicators in GRI (Global Reporting Initiative) in its G4 version, a panel with monitoring indicators related to relevant issues were elaborated.

Environmental risk analysis for offshore oil and gas activities

Energy Technology Data Exchange (ETDEWEB)

Brude, Odd Willy; Aspholm, Ole O.; Rudberg, Anders [Det Norske Veritas (Brazil)

2008-07-01

Offshore oil and gas activities always have a risk for environmental impact due to potential accidental releases of oil and gas. The environmental risk can be calculated as a combination of the frequency of such accidents to occur and their environmental consequences in terms of environmental damage to habitats or populations. A method for conducting environmental risk analysis has been in use in Norwegian offshore waters for a decade, with a continuously refinement of methodology over the past years. This paper outlines the principles in the MIRA method and gives examples and discussions regarding use in different environmental compartments. The risk assessment starts with identification of oil spill scenarios with frequencies of potential release rates and spill durations. The next step is to model the oil drift for each accidental oil spill scenario. Drift and fate of oil is modeled probabilistic. Based on the oil spill scenarios and their probability of oil pollution, the potential environmental damage is quantified for each scenario. The endpoint of environmental damage is reduction of a population and the resulting recovery time (in years) for various species and habitats. Environmental risk levels are then evaluated against the operating companies' environmental acceptance criteria. (author)

Cost-benefit analysis for design of environmentally conscious manufacturing

International Nuclear Information System (INIS)

Matysiak, L.M.

1993-01-01

In recent years, much attention has been focused on reducing the environmental impacts of products and manufacturing processes. Concerned about rising compliance costs and stringent regulatory requirements, companies are carefully evaluating the environmental impacts of their products. In response, designers, engineers, and managers are beginning to use life-cycle analysis, design for environment techniques, and environmentally conscious manufacturing (ECM) as tools to help them to not only do what is best for the environment, but also to do what is best for their company. These tools are also a useful aid in evaluating the trade-offs that may exist between different product and process alternatives. However, how does one choose the optimal solution from these various product and process alternatives? Cost versus benefit analysis is an effective tool that can be used to evaluate various manufacturing alternatives and to choose a solution that is both cost effective and environmentally compatible. Many companies are beginning to use cost benefit analyses as a means to justify product or process modifications that result in a benefit to the environment

Integrating health and environmental impact analysis.

Science.gov (United States)

Reis, S; Morris, G; Fleming, L E; Beck, S; Taylor, T; White, M; Depledge, M H; Steinle, S; Sabel, C E; Cowie, H; Hurley, F; Dick, J McP; Smith, R I; Austen, M

2015-10-01

Scientific investigations have progressively refined our understanding of the influence of the environment on human health, and the many adverse impacts that human activities exert on the environment, from the local to the planetary level. Nonetheless, throughout the modern public health era, health has been pursued as though our lives and lifestyles are disconnected from ecosystems and their component organisms. The inadequacy of the societal and public health response to obesity, health inequities, and especially global environmental and climate change now calls for an ecological approach which addresses human activity in all its social, economic and cultural complexity. The new approach must be integral to, and interactive, with the natural environment. We see the continuing failure to truly integrate human health and environmental impact analysis as deeply damaging, and we propose a new conceptual model, the ecosystems-enriched Drivers, Pressures, State, Exposure, Effects, Actions or 'eDPSEEA' model, to address this shortcoming. The model recognizes convergence between the concept of ecosystems services which provides a human health and well-being slant to the value of ecosystems while equally emphasizing the health of the environment, and the growing calls for 'ecological public health' as a response to global environmental concerns now suffusing the discourse in public health. More revolution than evolution, ecological public health will demand new perspectives regarding the interconnections among society, the economy, the environment and our health and well-being. Success must be built on collaborations between the disparate scientific communities of the environmental sciences and public health as well as interactions with social scientists, economists and the legal profession. It will require outreach to political and other stakeholders including a currently largely disengaged general public. The need for an effective and robust science-policy interface has

Environmental regulation and competitiveness. A meta-analysis of international trade studies

International Nuclear Information System (INIS)

Mulatu, A.; Florax, R.J.G.M.; Withagen, C.A.A.M.

2001-01-01

The potential relationship between domestic environmental regulation and international competitiveness has evoked various speculations. The common neoclassical train of thought is that strict environmental regulation is detrimental to the competitiveness of industry, and that it induces phenomena such as ecological dumping, ecological capital flight, and regulatory 'chill' in environmental standards. A different view is that strict environmental regulation triggers industry's innovation potential, and subsequently increases its competitiveness. The impact of environmental regulation on competitiveness has been analyzed in terms of international capital movements, new firm formation, and international trade. This paper focuses on a statistically rigorous analysis of international trade studies, using a technique that is known as meta-analysis. The paper presents a statistically supported evaluation of the literature, in order to assess what the main conclusions regarding the relationship between environmental regulation and competitiveness are when it comes to studies on international trade flows. The synthesis of the literature is subsequently used to present guidelines for future primary research in this area

Environmental condition assessment of US military installations using GIS based spatial multi-criteria decision analysis.

Science.gov (United States)

Singer, Steve; Wang, Guangxing; Howard, Heidi; Anderson, Alan

2012-08-01

Environment functions in various aspects including soil and water conservation, biodiversity and habitats, and landscape aesthetics. Comprehensive assessment of environmental condition is thus a great challenge. The issues include how to assess individual environmental components such as landscape aesthetics and integrate them into an indicator that can comprehensively quantify environmental condition. In this study, a geographic information systems based spatial multi-criteria decision analysis was used to integrate environmental variables and create the indicator. This approach was applied to Fort Riley Military installation in which land condition and its dynamics due to military training activities were assessed. The indicator was derived by integrating soil erosion, water quality, landscape fragmentation, landscape aesthetics, and noise based on the weights from the experts by assessing and ranking the environmental variables in terms of their importance. The results showed that landscape level indicator well quantified the overall environmental condition and its dynamics, while the indicator at level of patch that is defined as a homogeneous area that is different from its surroundings detailed the spatiotemporal variability of environmental condition. The environmental condition was mostly determined by soil erosion, then landscape fragmentation, water quality, landscape aesthetics, and noise. Overall, environmental condition at both landscape and patch levels greatly varied depending on the degree of ground and canopy disturbance and their spatial patterns due to military training activities and being related to slope. It was also determined the environment itself could be recovered quickly once military training was halt or reduced. Thus, this study provided an effective tool for the army land managers to monitor environmental dynamics and plan military training activities. Its limitation lies at that the obtained values of the indicator vary and are

An Analysis of Environmental Advertising Frames from 1990 to 2010

OpenAIRE

VanDyke, Matthew Steven

2012-01-01

Recent calls in environmental communication literature suggest researchers should understand the relationships between media message content, message construction, and audience effects. This thesis analyzed environmental advertising frames over time to inform strategic environmental communication research and practice. The study was a media content analysis guided by framing theory. Framing theory asserts the construction of media messages involves the selection and salience of particular mes...

Environmental impact analysis of the Nuclear Merchant Ship Program-addendum. Special study

International Nuclear Information System (INIS)

1977-06-01

This study represents a qualitative extension of an earlier Environmental Impact Analysis of the Nuclear Merchant Ship Program (MarAd, 1975) using an Ultra Large Crude Carrier (ULCC) as the reference ship, to other types of ships including a containership, dry-bulk cargo vessel, and an icebreaking oil tanker. This qualitative analysis shows that, for ships operating into coastal ports (containerships and possibly dry-bulk carriers), both ecological and radiological impacts would be somewhat greater than for the reference ULCC docking at an offshore terminal. These impacts can be kept within the guidelines established for land based nuclear power plants by implementation of appropriate operating procedures

40 CFR 262.105 - What must be included in the laboratory environmental management plan?

Science.gov (United States)

2010-07-01

... compliance, waste minimization, risk reduction and continual improvement of the environmental management... its compliance with the Environmental Management Plan and applicable federal and state hazardous waste... laboratory environmental management plan? 262.105 Section 262.105 Protection of Environment ENVIRONMENTAL...

78 FR 27235 - Technical Guidance for Assessing Environmental Justice in Regulatory Analysis

Science.gov (United States)

2013-05-09

... Justice in Regulatory Analysis.'' The purpose of this guidance is to provide EPA analysts with technical...-566-2363. Mail: Technical Guidance for Assessing Environmental Justice in Regulatory Analysis... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OA-2013-0320; FRL-9810-5] Technical Guidance for Assessing...

Instruments for the promotion of environmental innovations. Stocktaking, evaluation and deficit analysis; Instrumente zur Foerderung von Umweltinnovationen. Bestandsaufnahme, Bewertung und Defizitanalyse

Energy Technology Data Exchange (ETDEWEB)

Rennings, Klaus; Rammer, Christian; Oberndorfer, Ulrich [Zentrum fuer Europaeische Wirtschaftsforschung (ZEW), GmbH, Mannheim (DE)] (and others)

2008-03-15

In the ecological report 2006 of the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (Berlin, Federal Republic of Germany) with the title ''Environment - Innovation - Occupation'', the Federal Ministry outlines the concept of an innovative oriented environmental policy. An innovative environmental policy contributes to the reduction of the environmental pollution and the ecological damages of industrial production. In this background, the question arises, how the environmental policy can support appropriate innovative activities. For this, the research project under consideration presents the following contributions: (a) Overview of the most important instruments for the promotion of environmental innovations in Germany; (b) Estimation of the effectiveness of the instruments including gap analysis and deficit analysis; (c) Presentation of foreign Best Practice Examples (instruments and environmental political beginnings); (d) Proposals for priority environmental political starting points to the advancement of the equipment and pointing out the further research need.

Development of environmental sample analysis techniques for safeguards

International Nuclear Information System (INIS)

Magara, Masaaki; Hanzawa, Yukiko; Esaka, Fumitaka

1999-01-01

JAERI has been developing environmental sample analysis techniques for safeguards and preparing a clean chemistry laboratory with clean rooms. Methods to be developed are a bulk analysis and a particle analysis. In the bulk analysis, Inductively-Coupled Plasma Mass Spectrometer or Thermal Ionization Mass Spectrometer are used to measure nuclear materials after chemical treatment of sample. In the particle analysis, Electron Probe Micro Analyzer and Secondary Ion Mass Spectrometer are used for elemental analysis and isotopic analysis, respectively. The design of the clean chemistry laboratory has been carried out and construction will be completed by the end of March, 2001. (author)

Sampling and chemical analysis in environmental samples around Nuclear Power Plants and some environmental samples

Energy Technology Data Exchange (ETDEWEB)

Cho, Yong Woo; Han, Man Jung; Cho, Seong Won; Cho, Hong Jun; Oh, Hyeon Kyun; Lee, Jeong Min; Chang, Jae Sook [KORTIC, Taejon (Korea, Republic of)

2002-12-15

Twelve kinds of environmental samples such as soil, seawater, underground water, etc. around Nuclear Power Plants(NPPs) were collected. Tritium chemical analysis was tried for the samples of rain water, pine-needle, air, seawater, underground water, chinese cabbage, a grain of rice and milk sampled around NPPs, and surface seawater and rain water sampled over the country. Strontium in the soil that sere sampled at 60 point of district in Korea were analyzed. Tritium were sampled at 60 point of district in Korea were analyzed. Tritium were analyzed in 21 samples of surface seawater around the Korea peninsular that were supplied from KFRDI(National Fisheries Research and Development Institute). Sampling and chemical analysis environmental samples around Kori, Woolsung, Youngkwang, Wooljin Npps and Taeduk science town for tritium and strontium analysis was managed according to plans. Succeed to KINS after all samples were tried.

Characteristics and trends on global environmental monitoring research: a bibliometric analysis based on Science Citation Index Expanded.

Science.gov (United States)

Zhang, Di; Fu, Hui-Zhen; Ho, Yuh-Shan

2017-11-01

A bibliometric analysis based on the Science Citation Index Expanded from Web of Science was carried out to provide insights into research activities and trends of the environmental monitoring from 1993 to 2012. Study emphases covered publication outputs, language, categories, journals, countries/territories, institutions, words, and hot issues. The results indicated that the annual output of environmental monitoring publications increased steadily. The environmental sciences and analytical chemistry were the two most common categories. Environmental Monitoring and Assessment published the most articles. The USA and the UK ranked in the top two in terms of all five indicators. The U.S. Environmental Protection Agency took the leading position of the institutions in terms of publication output. The synthesized analysis by words in title, author keywords, and KeyWords Plus provided important clues for hot issues. Researchers paid more attention on water environment monitoring than other environmental factors. The contaminants including organic contaminants, heavy metal, and radiation were most common research focuses, and the organic contaminants and heavy metal of the degree of concern were gradually rising. Sensor and biosensor played an important role in the field of environmental monitoring devices. In addition to conventional device detection method, the remote sensing, GIS, and wireless sensor networks were the mainstream environmental monitoring methods. The international organization, social awareness, and the countries' positive and effective political and policies promoted the published articles.

Environmental cost-effectiveness analysis in intertemporal natural resource policy: evaluation of selective fishing gear.

Science.gov (United States)

Kronbak, Lone Grønbæk; Vestergaard, Niels

2013-12-15

In most decision-making involving natural resources, the achievements of a given policy (e.g., improved ecosystem or biodiversity) are rather difficult to measure in monetary units. To address this problem, the current paper develops an environmental cost-effectiveness analysis (ECEA) to include intangible benefits in intertemporal natural resource problems. This approach can assist managers in prioritizing management actions as least cost solutions to achieve quantitative policy targets. The ECEA framework is applied to a selective gear policy case in Danish mixed trawl fisheries in Kattegat and Skagerrak. The empirical analysis demonstrates how a policy with large negative net benefits might be justified if the intangible benefits are included. Copyright © 2013 Elsevier Ltd. All rights reserved.

A GEOSPATIAL ANALYSIS OF THE RELATIONSHIP BETWEEN ENVIRONMENTAL DRIVERS AND VECTOR-BORNE DISEASES

Directory of Open Access Journals (Sweden)

MARIA IOANA VLAD-ȘANDRU

2015-10-01

Full Text Available A Geospatial Analysis of the Relationship between Environmental Drivers and Vector-Borne Diseases. Human health is profoundly affected by weather and climate. Environmental health is becoming a major preoccupation on a world-wide scale; there is a close correlation between a population’s state of health and the quality of its environment, considering many infectious diseases are at least partly dependent on environmental factors. When we talk about the environment, we realize that it includes and affects fields of action from our daily life. Earth observation from space, with validation from in situ observations, provide a greater understanding of the environment and enable us to monitor and predict key environmental phenomena and events that can affect our livelihoods and health. Even thought, the use of Earth observation is growing in usefulness for a wide variety of uses, it is extremely unlikely that Earth Observation will be able to detect infectious diseases directly. Instead, Earth observation can be used to detect high NDVI index (and possibly attribute the high surface chlorophyll concentration to a particular disease, and help predict the movement of the agents carrying vector-borne disease. Many diseases need certain temperature and moisture conditions to breed. The primary objective of analyzing environmental health risk and vulnerabilities is to support the Development Regions to strengthen their capacity to assess, visualize and analyze health risks and incorporate the results of this analysis in a health risk map for disaster risk reduction, emergency preparedness and response plans. At the same time, such an analysis applied in health, allows starting the collection and homogenization of baseline data, information and maps to help health authorities and decision makers to take informed decisions in times of crises. Informational Health Platform would be used for the integration of data coming from different sources in order to

A cross-sectional analysis of reported corporate environmental sustainability practices.

Science.gov (United States)

Cowan, Dallas M; Dopart, Pamela; Ferracini, Tyler; Sahmel, Jennifer; Merryman, Kimberly; Gaffney, Shannon; Paustenbach, Dennis J

2010-12-01

The concept of sustainability evolved throughout the 1970s and 1980s, but was formally described by the 27 principles of the Rio Declaration on Environment and Development in 1992. Despite the passage of nearly 20years, to date there are no uniform set of federal rules, regulations, or guidelines specifically governing the environmental aspects of sustainability practices or related requirements in the United States. In this benchmark analysis, we have collected information on the sustainability programs of the five largest US companies in each of the 26 industrial sectors [based on the Forbes Global 2000 through 2009 (n=130)]. For each company, we reviewed the most recent corporate sustainability, citizenship, or responsibility report, limiting our scope to environmental components, if available. Ten criteria were identified and analyzed, including leadership, reporting, external review, certification, and individual components of environmental sustainability programs. With respect to the prevalence of sustainability components between various business sectors, we found that the Drugs and Biotechnology (87%), Household and Personal Products (87%) and Oil and Gas Operations (87%) industries had the most comprehensive environmental sustainability programs. Using the nine components of environmental sustainability as a benchmark, we identified four key components as the characteristics of the most comprehensive environmental sustainability programs. These were (1) empowering leadership with a commitment to sustainability (80%), (2) standardized reporting (87%), (3) third-party evaluation of the sustainability programs (73%), and (4) obtaining ISO 14001 certification (73%). We found that many firms shaped their own definition of sustainability and developed their associated sustainability programs based on their sector, stakeholder interests, products or services, and business model. We noted an emerging area that we have called product sustainability - one in which

40 CFR 60.1125 - What must I include in my siting analysis?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false What must I include in my siting... § 60.1125 What must I include in my siting analysis? (a) Include an analysis of how your municipal...) Vegetation. (b) Include an analysis of alternatives for controlling air pollution that minimize potential...

Learning from environmental data: Methods for analysis of forest nutrition time series

Energy Technology Data Exchange (ETDEWEB)

Sulkava, M. (Helsinki Univ. of Technology, Espoo (Finland). Computer and Information Science)

2008-07-01

Data analysis methods play an important role in increasing our knowledge of the environment as the amount of data measured from the environment increases. This thesis fits under the scope of environmental informatics and environmental statistics. They are fields, in which data analysis methods are developed and applied for the analysis of environmental data. The environmental data studied in this thesis are time series of nutrient concentration measurements of pine and spruce needles. In addition, there are data of laboratory quality and related environmental factors, such as the weather and atmospheric depositions. The most important methods used for the analysis of the data are based on the self-organizing map and linear regression models. First, a new clustering algorithm of the self-organizing map is proposed. It is found to provide better results than two other methods for clustering of the self-organizing map. The algorithm is used to divide the nutrient concentration data into clusters, and the result is evaluated by environmental scientists. Based on the clustering, the temporal development of the forest nutrition is modeled and the effect of nitrogen and sulfur deposition on the foliar mineral composition is assessed. Second, regression models are used for studying how much environmental factors and properties of the needles affect the changes in the nutrient concentrations of the needles between their first and second year of existence. The aim is to build understandable models with good prediction capabilities. Sparse regression models are found to outperform more traditional regression models in this task. Third, fusion of laboratory quality data from different sources is performed to estimate the precisions of the analytical methods. Weighted regression models are used to quantify how much the precision of observations can affect the time needed to detect a trend in environmental time series. The results of power analysis show that improving the

Who benefits from environmental policy? An environmental justice analysis of air quality change in Britain, 2001-2011

Science.gov (United States)

Mitchell, Gordon; Norman, Paul; Mullin, Karen

2015-10-01

Air quality in Great Britain has improved in recent years, but not enough to prevent the European Commission (EC) taking legal action for non-compliance with limit values. Air quality is a national public health concern, with disease burden associated with current air quality estimated at 29 000 premature deaths per year due to fine particulates, with a further burden due to NO2. National small-area analyses showed that in 2001 poor air quality was much more prevalent in socio-economically deprived areas. We extend this social distribution of air quality analysis to consider how the distribution changed over the following decade (2001-2011), a period when significant efforts to meet EC air quality directive limits have been made, and air quality has improved. We find air quality improvement is greatest in the least deprived areas, whilst the most deprived areas bear a disproportionate and rising share of declining air quality including non-compliance with air quality standards. We discuss the implications for health inequalities, progress towards environmental justice, and compatibility of social justice and environmental sustainability objectives.

Economic factor environmental protection. Extending analysis according to environmental protection and innovation; Wirtschaftsfaktor Umweltschutz. Vertiefende Analyse zu Umweltschutz und Innovation

Energy Technology Data Exchange (ETDEWEB)

Edler, Dietmar [Deutsches Institut fuer Wirtschaftsforschung, Berlin (Germany); Blazejczak, Juergen [Deutsches Institut fuer Wirtschaftsforschung, Berlin (Germany); Fachhochschule Merseburg (Germany); Walz, Rainer [Fraunhofer Institut fuer Innovations- und Systemforschung (FhG ISI), Karlsruhe (DE)] (and others)

2007-06-15

Within the bounds of a research project, the authors of the contribution under consideration report on an extending analysis according to environmental protection and innovation. The stocktaking and evaluation of more important documents prove that despite the differences in the estimation of individual ranges an international consent insists according to central ecological challenges on global level. The consent covers the following target areas: Climate protection, preservation of the biological variety, water supply including waste water disposal and water protection, health protection. It is to be expected that in the next decades its validity will keep these ecological challenges although defusing or new environmental problems may result in single areas. It is to be expected that due to the world-wide economic development some emphasis of important ecological challenges will shift gradually to developing countries, in particular China and India.

32 CFR 989.16 - Environmental impact statement.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Environmental impact statement. 989.16 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.16 Environmental impact statement. (a) Certain classes of environmental impacts normally require preparation of an EIS (40 CFR 1501.4). These include...

Near-facility environmental monitoring

Energy Technology Data Exchange (ETDEWEB)

Schmidt, J.W.; Johnson, A.R.; Markes, B.M.; McKinney, S.M.; Perkins, C.J.

1995-06-01

This section of the 1994 Hanford Site Environmental Report summarizes the routine near-facility environmental monitoring programs which are presently being conducted at the Hanford Site. Several types of environmental media are sampled near nuclear facilities to monitor the effectiveness of waste management and restoration activities, and effluent treatment and control practices. These media include air, surface water and springs, surface contamination, soil and vegetation, investigative sampling (which can include wildlife), and external radiation. Sampling and analysis information and analytical results for 1994 for each of these media are summarized in this section. Additional data and more detailed information may be found in Westinghouse Hanford Company Operational Environmental Monitoring Annual Report, Calendar Year 1994.

Environmental regulation and competitiveness. A meta-analysis of international trade studies

Energy Technology Data Exchange (ETDEWEB)

Mulatu, A.; Florax, R.J.G.M. [Department of Spatial Economics, Master-point and Tinbergen Institute, Vrije Universiteit, Amsterdam (Netherlands); Withagen, C.A.A.M. [Department of Economics and CentER, Tilburg University, Tilburg (Netherlands)

2001-07-01

The potential relationship between domestic environmental regulation and international competitiveness has evoked various speculations. The common neoclassical train of thought is that strict environmental regulation is detrimental to the competitiveness of industry, and that it induces phenomena such as ecological dumping, ecological capital flight, and regulatory 'chill' in environmental standards. A different view is that strict environmental regulation triggers industry's innovation potential, and subsequently increases its competitiveness. The impact of environmental regulation on competitiveness has been analyzed in terms of international capital movements, new firm formation, and international trade. This paper focuses on a statistically rigorous analysis of international trade studies, using a technique that is known as meta-analysis. The paper presents a statistically supported evaluation of the literature, in order to assess what the main conclusions regarding the relationship between environmental regulation and competitiveness are when it comes to studies on international trade flows. The synthesis of the literature is subsequently used to present guidelines for future primary research in this area.

Small-scale wind power design, analysis, and environmental impacts

CERN Document Server

Abraham, John P

2014-01-01

In today's world, clean and robust energy sources are being sought to provide power to residences, commercial operations, and manufacturing enterprises. Among the most appealing energy sources is wind power-with its high reliability and low environmental impact. Wind power's rapid penetration into markets throughout the world has taken many forms, and this book discusses the types of wind power, as well as the appropriate decisions that need to be made regarding wind power design, testing, installation, and analysis. Inside, the authors detail the design of various small-wind systems including horizontal-axis wind turbines (HAWTs) and vertical-axis wind turbines (VAWTs). The design of wind turbines takes advantage of many avenues of investigation, all of which are included in the book. Analytical methods that have been developed over the past few decades are major methods used for design. Alternatively, experimentation (typically using scaled models in wind tunnels) and numerical simulation (using modern comp...

Moving your laboratories to the field – Advantages and limitations of the use of field portable instruments in environmental sample analysis

Energy Technology Data Exchange (ETDEWEB)

Gałuszka, Agnieszka, E-mail: Agnieszka.Galuszka@ujk.edu.pl [Geochemistry and the Environment Division, Institute of Chemistry, Jan Kochanowski University, 15G Świętokrzyska St., 25-406 Kielce (Poland); Migaszewski, Zdzisław M. [Geochemistry and the Environment Division, Institute of Chemistry, Jan Kochanowski University, 15G Świętokrzyska St., 25-406 Kielce (Poland); Namieśnik, Jacek [Department of Analytical Chemistry, Chemical Faculty, Gdańsk University of Technology (GUT), 11/12 G. Narutowicz St., 80-233 Gdańsk (Poland)

2015-07-15

The recent rapid progress in technology of field portable instruments has increased their applications in environmental sample analysis. These instruments offer a possibility of cost-effective, non-destructive, real-time, direct, on-site measurements of a wide range of both inorganic and organic analytes in gaseous, liquid and solid samples. Some of them do not require the use of reagents and do not produce any analytical waste. All these features contribute to the greenness of field portable techniques. Several stationary analytical instruments have their portable versions. The most popular ones include: gas chromatographs with different detectors (mass spectrometer (MS), flame ionization detector, photoionization detector), ultraviolet–visible and near-infrared spectrophotometers, X-ray fluorescence spectrometers, ion mobility spectrometers, electronic noses and electronic tongues. The use of portable instruments in environmental sample analysis gives a possibility of on-site screening and a subsequent selection of samples for routine laboratory analyses. They are also very useful in situations that require an emergency response and for process monitoring applications. However, quantification of results is still problematic in many cases. The other disadvantages include: higher detection limits and lower sensitivity than these obtained in laboratory conditions, a strong influence of environmental factors on the instrument performance and a high possibility of sample contamination in the field. This paper reviews recent applications of field portable instruments in environmental sample analysis and discusses their analytical capabilities. - Highlights: • Field portable instruments are widely used in environmental sample analysis. • Field portable instruments are indispensable for analysis in emergency response. • Miniaturization of field portable instruments reduces resource consumption. • In situ analysis is in agreement with green analytical chemistry

Moving your laboratories to the field – Advantages and limitations of the use of field portable instruments in environmental sample analysis

International Nuclear Information System (INIS)

Gałuszka, Agnieszka; Migaszewski, Zdzisław M.; Namieśnik, Jacek

2015-01-01

The recent rapid progress in technology of field portable instruments has increased their applications in environmental sample analysis. These instruments offer a possibility of cost-effective, non-destructive, real-time, direct, on-site measurements of a wide range of both inorganic and organic analytes in gaseous, liquid and solid samples. Some of them do not require the use of reagents and do not produce any analytical waste. All these features contribute to the greenness of field portable techniques. Several stationary analytical instruments have their portable versions. The most popular ones include: gas chromatographs with different detectors (mass spectrometer (MS), flame ionization detector, photoionization detector), ultraviolet–visible and near-infrared spectrophotometers, X-ray fluorescence spectrometers, ion mobility spectrometers, electronic noses and electronic tongues. The use of portable instruments in environmental sample analysis gives a possibility of on-site screening and a subsequent selection of samples for routine laboratory analyses. They are also very useful in situations that require an emergency response and for process monitoring applications. However, quantification of results is still problematic in many cases. The other disadvantages include: higher detection limits and lower sensitivity than these obtained in laboratory conditions, a strong influence of environmental factors on the instrument performance and a high possibility of sample contamination in the field. This paper reviews recent applications of field portable instruments in environmental sample analysis and discusses their analytical capabilities. - Highlights: • Field portable instruments are widely used in environmental sample analysis. • Field portable instruments are indispensable for analysis in emergency response. • Miniaturization of field portable instruments reduces resource consumption. • In situ analysis is in agreement with green analytical chemistry

Environmental Urbanization Assessment Using GIS and Multicriteria Decision Analysis: A Case Study for Denizli (Turkey Municipal Area

Directory of Open Access Journals (Sweden)

Erdal Akyol

2018-01-01

Full Text Available In recent years, life quality of the urban areas is a growing interest of civil engineering. Environmental quality is essential to display the position of sustainable development and asserts the corresponding countermeasures to the protection of environment. Urban environmental quality involves multidisciplinary parameters and difficulties to be analyzed. The problem is not only complex but also involves many uncertainties, and decision-making on these issues is a challenging problem which contains many parameters and alternatives inherently. Multicriteria decision analysis (MCDA is a very prepotent technique to solve that sort of problems, and it guides the users confidence by synthesizing that information. Environmental concerns frequently contain spatial information. Spatial multicriteria decision analysis (SMCDA that includes Geographic Information System (GIS is efficient to tackle that type of problems. This study has employed some geographic and urbanization parameters to assess the environmental urbanization quality used by those methods. The study area has been described in five categories: very favorable, favorable, moderate, unfavorable, and very unfavorable. The results are momentous to see the current situation, and they could help to mitigate the related concerns. The study proves that the SMCDA descriptions match the environmental quality perception in the city.

Sampling, storage and sample preparation procedures for X ray fluorescence analysis of environmental materials

International Nuclear Information System (INIS)

1997-06-01

X ray fluorescence (XRF) method is one of the most commonly used nuclear analytical technique because of its multielement and non-destructive character, speed, economy and ease of operation. From the point of view of quality assurance practices, sampling and sample preparation procedures are the most crucial steps in all analytical techniques, (including X ray fluorescence) applied for the analysis of heterogeneous materials. This technical document covers recent modes of the X ray fluorescence method and recent developments in sample preparation techniques for the analysis of environmental materials. Refs, figs, tabs

30 CFR 250.227 - What environmental impact analysis (EIA) information must accompany the EP?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What environmental impact analysis (EIA... and Information Contents of Exploration Plans (ep) § 250.227 What environmental impact analysis (EIA... requirements. Your EIA must: (1) Assess the potential environmental impacts of your proposed exploration...

Fatigue evaluation including environmental effects for primary circuit components in nuclear power plants

International Nuclear Information System (INIS)

Seichter, Johannes; Reese, Sven H.; Klucke, Dietmar

2013-01-01

The influence of LWR coolant environment to the lifetime of materials in Nuclear Power Plants is in discussion internationally. Environmental phenomena were investigated in laboratory tests and published in recent years. The discussion is mainly focused both on the transition from laboratory to real plant components and on numerical calculation procedures. Since publishing of the NUREG/CR-6909 report in 2007, formulae for calculating the Fen factors have been modified several times. Various calculation procedures like the so called 'Strain-integrated Method' and 'Simplified Approach' have been published while each approach yields to different results. The recent revision of the calculation procedure, proposed by ANL in 2012, is presented and discussed with regard to possible variations in the results depending on the assumptions made. In German KTA Rules the effect of environmentally assisted fatigue (EAF) is taken into account by means of so called attention thresholds. If the threshold value is exceeded, further measures like NDT, in-service inspections including fracture mechanical evaluations or detailed assessment procedures have to be performed. One way to handle those measures is to apply sophisticated procedures and to show that the calculated CUF is below the defined attention thresholds. On the basis of a practical example, methods and approaches will be discussed and recommendations in terms of avoiding over-conservatism and misinterpretation will be presented.

Fatigue evaluation including environmental effects for primary circuit components in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Seichter, Johannes [Siempelkamp Pruef- und Gutachter-Gesellschaft mbH, Dresden (Germany); Reese, Sven H.; Klucke, Dietmar [Component Technology Global Unit Generation, E.ON Kernkraft GmbH, Hannover (Germany)

2013-05-15

The influence of LWR coolant environment to the lifetime of materials in Nuclear Power Plants is in discussion internationally. Environmental phenomena were investigated in laboratory tests and published in recent years. The discussion is mainly focused both on the transition from laboratory to real plant components and on numerical calculation procedures. Since publishing of the NUREG/CR-6909 report in 2007, formulae for calculating the Fen factors have been modified several times. Various calculation procedures like the so called 'Strain-integrated Method' and 'Simplified Approach' have been published while each approach yields to different results. The recent revision of the calculation procedure, proposed by ANL in 2012, is presented and discussed with regard to possible variations in the results depending on the assumptions made. In German KTA Rules the effect of environmentally assisted fatigue (EAF) is taken into account by means of so called attention thresholds. If the threshold value is exceeded, further measures like NDT, in-service inspections including fracture mechanical evaluations or detailed assessment procedures have to be performed. One way to handle those measures is to apply sophisticated procedures and to show that the calculated CUF is below the defined attention thresholds. On the basis of a practical example, methods and approaches will be discussed and recommendations in terms of avoiding over-conservatism and misinterpretation will be presented.

Analysis of the environmental impact generated by nuclear activities

International Nuclear Information System (INIS)

Lazar, Roxana Elena; Dumitrescu, Maria

2000-01-01

Assessment of environmental impact represents one of the most formalized examples of interdisciplinary approach. After more then a century from the introduction of the concept of environmental impact assessment, this undertaking still represents an amalgamation of mini-studies based on pre-determined approaches rather than a genuine integrated document. This work presents the most important and adequate techniques of analysis of environmental impact generated by nuclear activities starting from identification of the events causing negative effects upon environment (by using checking list, the matrices and the cause-effect diagram) and radiation dose determination up to the decision making process. To preserve environment integrity the human factor should be re-evaluated as well as its active participation in formation and settling of an real environmental culture

Solid waste accident analysis in support of the Savannah River Waste Management Environmental Impact Statement

International Nuclear Information System (INIS)

Copeland, W.J.; Crumm, A.T.; Kearnaghan, D.P.; Rabin, M.S.; Rossi, D.E.

1994-07-01

The potential for facility accidents and the magnitude of their impacts are important factors in the evaluation of the solid waste management addressed in the Environmental Impact Statement. The purpose of this document is to address the potential solid waste management facility accidents for comparative use in support of the Environmental Impact Statement. This document must not be construed as an Authorization Basis document for any of the SRS waste management facilities. Because of the time constraints placed on preparing this accident impact analysis, all accident information was derived from existing safety documentation that has been prepared for SRS waste management facilities. A list of facilities to include in the accident impact analysis was provided as input by the Savannah River Technology Section. The accident impact analyses include existing SRS waste management facilities as well as proposed facilities. Safety documentation exists for all existing and many of the proposed facilities. Information was extracted from this existing documentation for this impact analysis. There are a few proposed facilities for which safety analyses have not been prepared. However, these facilities have similar processes to existing facilities and will treat, store, or dispose of the same type of material that is in existing facilities; therefore, the accidents can be expected to be similar

Variations analysis of the Society's preference structure regarding environmental issues

International Nuclear Information System (INIS)

Angel S, Enrique; Zambrano B, Ana Maria

2005-01-01

Society's preference structure regarding environmental issues is understood as the relative importance the society gives to various topics that collectively conform the environmental issues. Based on the hypothesis that this structure behavior and its definition vary with time, proposals are presented related to the concepts and a working plan allowing performing the structure's dynamic analysis. A method is described to gather information based on the systematic reading of a nation wide newspaper during a period time. A comparison is done between the resulting structure and several aspects as the environmental legislation, government plans and summits and environmental milestones

Environmental impact analysis; the example of the proposed Trans-Alaska Pipeline

Science.gov (United States)

Brew, David A.

1974-01-01

The environmental impact analysis made as required by the National Environmental Policy Act of 1969 for the proposed trans-Alaska pipeline included consideration of the (1) technologically complex and geographically extensive proposed project, (2) extremely different physical environments across Alaska along the proposed route and elsewhere in Alaska and in Canada along alternative routes, (3) socioeconomic environment of the State of Alaska, and (4) a wide variety of alternatives. The analysis was designed specifically to fit the project and environment that would be affected. The environment was divided into two general parts--natural physical systems and superposed socioeconomic systems--and those parts were further divided into discipline-oriented systems or components that were studied and analyzed by scientists of the appropriate discipline. Particular attention was given to potential feedback loops in the impact network and to linkages between the project's impacting effects and the environment. The results of the analysis as reported in the final environmental impact statement were that both unavoidable and threatened environmental impacts would result from construction, operation, and maintenance of the proposed pipeline system and the developments related to it. The principal unavoidable effects would be (1) disturbances of terrain, fish and wildlife habitat, and human environs, (2) the results of the discharge of effluent from the tanker-ballast-treatment facility into Port Valdez and of some indeterminate amount of oil released into the ocean from tank-cleaning operations at sea, and (3) the results associated with increased human pressures of all kinds on the environment. Other unavoidable effects would be those related to increase of State and Native Corporation revenues, accelerated cultural change of the Native population, and extraction of the oil and gas resource. The main threatened environmental effects would all be related to unintentional oil

United States experience in environmental cost-benefit analysis for nuclear power plants with implications for developing countries

International Nuclear Information System (INIS)

Spangler, M.B.

1980-08-01

Environmental cost-benefit analysis in the United States involves a comparison of diverse societal impacts of the proposed developments and its alternatives. Regarding nuclear power plant licensing actions, such analyses include the need for base-load electrical generating capacity versus the no-action alternative; alternative sources of energy; alternative sites for the proposed nuclear plants; and alternative technologies for mitigating environmental impacts. Many U.S. experiences and environmental assessment practices and comparative resource requirements presented in this report will not provide a wholly reliable reflection of the precise situation of each country. Nevertheless, the procedural and substantive issues encountered by the United States in nuclear power plant licensing may exhibit a number of important, if rough, parallelisms for other countries. Procedural issues dealt with include: the scoping of alternatives and impact issues; the problem of balancing incommensurable impacts; and treating uncertainty in measuring or forecasting certain kinds of environmental impacts. Although substantive environmental impact issues will vary appreciably among nations, it is to be expected that many of the substantive impact issues such as impacts on biota, community-related effects, and aesthetic impacts will also have some measure of universal interest to other countries

Space diffuses multiobjective analysis: A tool to locate lineal projects with a focus of environmental management

International Nuclear Information System (INIS)

Patricia Jaramillo A Liliana Vinasco T

2005-01-01

This paper presents a methodological proposal that is developed to identify corridors for lineal projects (highways, transmission lines, pipelines, etc), with environmental management criteria, when there is not complete information about the area of influence of the project, or some of the information is imprecise. Also a computational module is developed that allow the use of the methodological proposal. The proposal is based in the fuzzy multiobjective analysis concept, which takes elements of the diffuse logic and the traditional Multiobjective Analysis; the first one, it conserves its properties with imprecise information and of the second allows, the minimization of multiple objective correspond to the least environmental the physical, biological, cultural, economical and political dimensions of the environment uses the Geographic Information SIG this proposal is being constituted a complete tool for taking decisions in which space attributed is included. The FMA is a recent technique that is in development [S integration to GIS is stiller. The proposal is a contribution to the construction of a conceptual scheme for future applications in this aspects constitute a tool for the environmental planning which decreasing the risks, future cost analysis of natural resources and human group

Proof of fatigue strength of nuclear components part II: Numerical fatigue analysis for transient stratification loading considering environmental effects

International Nuclear Information System (INIS)

Krätschmer, D.; Roos, E.; Schuler, X.; Herter, K.-H.

2012-01-01

For the construction, design and operation of nuclear components and systems the appropriate technical codes and standards provide detailed analysis procedures which guarantee a reliable behaviour of the structural components throughout the specified lifetime. Especially for cyclic stress evaluation the different codes and standards provide different fatigue analyses procedures to be performed considering the various mechanical and thermal loading histories and geometric complexities of the components. To consider effects of light water reactor coolant environments, new design curves included in report NUREG/CR-6909 for austenitic stainless steels and for low alloy steels have been presented. For the usage of these new design curves an environmental fatigue correction factor for incorporating environmental effects has to be calculated and used. The application of this environmental correction factor to a fatigue analysis of a nozzle with transient stratification loads, derived by in-service monitoring, has been performed. The results are used to compare with calculated usage factors, based on design curves without taking environmental effects particularly into account. - Highlights: ► We model an nozzle for fatigue analysis und mechanical and thermal loading conditions. ► A simplified as well as a general elastic–plastic fatigue analysis considering environmental effects is performed. ► The influence of different factors calculating the environmental factor F en are shown. ► The presented numerical evaluation methodology allows the consideration of all relevant parameters to assess lifetime.

Analysis of changes in environmental radiation, and three types of environmental radiation detector performance comparisons

International Nuclear Information System (INIS)

Park, J.H; Seo, J.H; Park, S.M; Yu, B.N; Park, J.H; Joo, K.S

2013-06-01

High-pressure ion chamber (GE Reuter-Stokes, HPIC), accuracy is high but the high price and do not have the ability nuclide analysis is a disadvantage. NaI(Tl) and PMT scintillation detector of radioactive materials can be divided. Environmental radiation measurements using a semiconductor with SiPM detector PMT to replace the value of the results were compared. SiPM detector using radiation environment were measured in the field to verify the accuracy and energy resolution. SiPMs performance as environmental radiation measurement equipment and radioactive material distinction as a personal dosimeter based technology, using the above results were prepared. The interest on the environmental radiation due to the Fukushima power plant crisis in Japan has been growing concern about the radiation environment of the relatively close proximity Korea is a very heightened state. Could be confirmed in the radiation environment of nuclear power plants around the analysis and performance of the next generation of environmental radiation meter. Fukushima power plants accident after 2 years, the equipment installed by this analysis meets the performance as a radiation detector could be confirmed as follows. CANA Inc. developed by radionuclides classification of using man-made and natural radionuclides and man-made radionuclides separated, ensure the value of the results were analyzed. Could be and alternative to the conventional detector energy resolution ( 137 CS<15%) and linearity (<15%) to satisfy the performance requirements of the measurement result of environmental radiation detector is considered. SiPM radiation environment changes and HPIC and NaI(TI) scintillation detector installed in Korea of the Fukushima power plant after the accident, radiation environment using a small alternative was to verify the accuracy of the measuring equipment. A big difference in performance as invisible by comparison with the large detector Assay miniaturization rough as a personal

78 FR 56869 - Nuclear Infrastructure Programmatic Environmental Impact Statement Supplement Analysis...

Science.gov (United States)

2013-09-16

... DEPARTMENT OF ENERGY Nuclear Infrastructure Programmatic Environmental Impact Statement Supplement... of Energy (DOE) has completed the Supplement Analysis (SA) of the Programmatic Environmental Impact Statement for Accomplishing Expanded Civilian Nuclear Energy Research and Development and Isotope Production...

Emission and costs up to and including 2030 for the current environmental policy. Background information for the National Environmental Outlook 5

International Nuclear Information System (INIS)

Van Wee, G.P.; Kuijpers-Linde, M.A.J.; Van Gerwen, O.J.

2001-03-01

Every four years the Dutch National Institute of Public Health and the Environment (RIVM) publishes an Environmental Outlook in preparation for the National Environmental Policy Plan (NEPP). The fifth National Environmental Outlook (NEOS) describes developments in the quality of the environment in the Netherlands for 2000-2030 against a background of developments on the European and global scales. The two macro-economic scenarios of the Netherlands Bureau for Economic and Policy Analysis (CPB) used are the European Coordination (EC) scenario and the Global Competition scenario (GC). Consequences for public health, nature and the human physical environment are also indicated. 'Fixed policy' scenarios are used in the Environmental Outlook for the Netherlands. In 'fixed policy' scenarios it is assumed that all policy measures agreed on by the year 2000 will be implemented, but no new measures taken. In this way the Outlook offers baseline scenarios that can be compared with targets and objectives to facilitate the development of new policy. The Fifth National Environmental Outlook was realised with the assistance of many other Dutch research institutes. This background document to NEOS presents estimated levels of energy use, emissions and costs of environmental measures for the 1995-2020 period. The main conclusions are: The environmental problems most difficult to tackle are climate change and noise nuisance. These problems are highly related to energy use and transportation; The policy as presented in the 'Uitvoeringsnota Klimaatbeleid', a document describing the Dutch Kyoto-related climate policy, results in a reduction of greenhouse gases of 15 Mton CO2 equivalents (GS scenario) with respect to the pre-Kyoto policy in 2010. To meet the Kyoto agreements a further reduction of approximately 45 Mton CO2 equivalents is needed. If policies in the 'Uitvoeringsnota Klimaatbeleid' are further instrumentalised and made concrete, an extra reduction of 10 Mton is possible

Environmental management in sugar-energy sector: a comparative analysis

Directory of Open Access Journals (Sweden)

Andréia Marize Rodrigues

2014-11-01

Full Text Available With the rise of the environmental variable in the business environment, companies started to give greater attention to strategies and practices focused on the rational use of natural resources and minimize the environmental impacts of their business operations. Many productive sectors stood out in the reflections on production and the environment, as is the case of the sugar energy industry, which constitutes a sector with a highly demanding industrial activity of natural resources, whether as sources of inputs as depositories of waste production. Thus, the aim of this paper is a comparative analysis of environmental practices of two sugar energy plants, both from the point of view of their operational strategy and regarding the suitability of the disposal of waste generated by the industrial area. It was concluded that, although many practices adopted by businesses are analogous, one of the studied plants have distinctive environmental performance, because of the increased attention given to the implementation of environmental practices and especially the inclusion of the environmental variable in their strategies.

ANALYSIS OF ENVIRONMENTAL FRAGILITY USING MULTI-CRITERIA ANALYSIS (MCE FOR INTEGRATED LANDSCAPE ASSESSMENT

Directory of Open Access Journals (Sweden)

Abimael Cereda Junior

2014-01-01

Full Text Available The Geographic Information Systems brought greater possibilitie s to the representation and interpretation of the landscap e as well as the integrated a nalysis. However, this approach does not dispense technical and methodological substan tiation for achieving the computational universe. This work is grounded in ecodynamic s and empirical analysis of natural and anthr opogenic environmental Fragility a nd aims to propose and present an integrated paradigm of Multi-criteria Analysis and F uzzy Logic Model of Environmental Fragility, taking as a case study of the Basin of Monjolinho Stream in São Carlos-SP. The use of this methodology allowed for a reduct ion in the subjectivism influences of decision criteria, which factors might have its cartographic expression, respecting the complex integrated landscape.

An inquiry into the potential of scenario analysis for dealing with uncertainty in strategic environmental assessment in China

International Nuclear Information System (INIS)

Zhu Zhixi; Bai, Hongtao; Xu He; Zhu Tan

2011-01-01

Strategic environmental assessment (SEA) inherently needs to address greater levels of uncertainty in the formulation and implementation processes of strategic decisions, compared with project environmental impact assessment. The range of uncertainties includes internal and external factors of the complex system that is concerned in the strategy. Scenario analysis is increasingly being used to cope with uncertainty in SEA. Following a brief introduction of scenarios and scenario analysis, this paper examines the rationale for scenario analysis in SEA in the context of China. The state of the art associated with scenario analysis applied to SEA in China was reviewed through four SEA case analyses. Lessons learned from these cases indicated the word 'scenario' appears to be abused and the scenario-based methods appear to be misused due to the lack of understanding of an uncertain future and scenario analysis. However, good experiences were also drawn on, regarding how to integrate scenario analysis into the SEA process in China, how to cope with driving forces including uncertainties, how to combine qualitative scenario storylines with quantitative impact predictions, and how to conduct assessments and propose recommendations based on scenarios. Additionally, the ways to improve the application of this tool in SEA were suggested. We concluded by calling for further methodological research on this issue and more practices.

Ocean Thermal Energy Conversion (OTEC) Programmatic Environmental Analysis--Appendices

Energy Technology Data Exchange (ETDEWEB)

Authors, Various

1980-01-01

The programmatic environmental analysis is an initial assessment of Ocean Thermal Energy Conversion (OTEC) technology considering development, demonstration and commercialization. It is concluded that the OTEC development program should continue because the development, demonstration, and commercialization on a single-plant deployment basis should not present significant environmental impacts. However, several areas within the OTEC program require further investigation in order to assess the potential for environmental impacts from OTEC operation, particularly in large-scale deployments and in defining alternatives to closed-cycle biofouling control: (1) Larger-scale deployments of OTEC clusters or parks require further investigations in order to assess optimal platform siting distances necessary to minimize adverse environmental impacts. (2) The deployment and operation of the preoperational platform (OTEC-1) and future demonstration platforms must be carefully monitored to refine environmental assessment predictions, and to provide design modifications which may mitigate or reduce environmental impacts for larger-scale operations. These platforms will provide a valuable opportunity to fully evaluate the intake and discharge configurations, biofouling control methods, and both short-term and long-term environmental effects associated with platform operations. (3) Successful development of OTEC technology to use the maximal resource capabilities and to minimize environmental effects will require a concerted environmental management program, encompassing many different disciplines and environmental specialties. This volume contains these appendices: Appendix A -- Deployment Scenario; Appendix B -- OTEC Regional Characterization; and Appendix C -- Impact and Related Calculations.

High sensitivity neutron activation analysis of environmental and biological standard reference materials

International Nuclear Information System (INIS)

Greenberg, R.R.; Fleming, R.F.; Zeisler, R.

1984-01-01

Neutron activation analysis is a sensitive method with unique capabilities for the analysis of environmental and biological samples. Since it is based upon the nuclear properties of the elements, it does not suffer from many of the chemical effects that plague other methods of analysis. Analyses can be performed either with no chemical treatment of the sample (instrumentally), or with separations of the elements of interest after neutron irradiation (radiochemically). Typical examples of both types of analysis are discussed, and data obtained for a number of environmental and biological SRMs are presented. (author)

Selected industrial and environmental applications of neutron activation analysis

International Nuclear Information System (INIS)

Kucera, J.

1999-01-01

A review of the applications of Instrumental Neutron Activation Analysis (INAA) in the industrial and environmental fields is given. Detection limits for different applications are also given. (author)

The National Environmental Policy Act and DOE's programmatic environmental impact statement

International Nuclear Information System (INIS)

Wisenbaker, W.E.

1991-01-01

The National Environmental Policy Act (NEPA) of 1969 requires that all agencies of the federal government prepare a detailed statement on any action significantly affecting the quality of the human environment. Such a statement must include the environmental impact of the proposed action, any adverse environmental effects that cannot be avoided should the proposed action be implemented, and alternatives to the proposed action. In requiring environmental statements, NEPA encourages viewing related actions collectively and looking at cumulative impacts. A programmatic environmental impact statement (PEIS) is a broad environmental analysis of a program or policy prepared when actions are connected and may have cumulative environmental impacts. The PEIS benefits include providing input into an agency's planning and decision making, assessing potential environmental consequences of a wide range of alternatives before options have been foreclosed, and allowing consideration of systemwide impacts of various alternatives early in the decision-making process. The US Department of Energy (DOE) will prepare its PEIS on Environmental Restoration and Waste Management program. The PEIS will consider programmatic issues and integrated approaches to the program; address national, program-wide alternatives rather than site-specific actions; and provide for subsequent NEPA documents of narrower scope to be prepared to address site-specific or project-specific actions

Environmental analysis of a formerly utilized MED/AEC site: Site A and plot M, Palos Forest Preserve, Palos Park, Illinois

Energy Technology Data Exchange (ETDEWEB)

1979-09-01

This environmental analysis report describes the existing site environment and evaluates the environmental impacts of 8 options for remedial action, including allowing buried waste to remain undisturbed. Conformity or conflict with governmental statutes, regulations and standards was determined, especially with regard to compliance with contamination criteria and guidelines. The program of measurements, documentation, and control to demonstrate compliance with these criteria and guidelines was identified.

Environmental analysis of a formerly utilized MED/AEC site: Site A and plot M, Palos Forest Preserve, Palos Park, Illinois

International Nuclear Information System (INIS)

1979-09-01

This environmental analysis report describes the existing site environment and evaluates the environmental impacts of 8 options for remedial action, including allowing buried waste to remain undisturbed. Conformity or conflict with governmental statutes, regulations and standards was determined, especially with regard to compliance with contamination criteria and guidelines. The program of measurements, documentation, and control to demonstrate compliance with these criteria and guidelines was identified

Preliminary Screening Analysis for the Environmental Risk Evaluation System: Task 2.1.1: Evaluating Effects of Stressors – Fiscal Year 2010 Progress Report: Environmental Effects of Marine and Hydrokinetic Energy

Energy Technology Data Exchange (ETDEWEB)

Anderson, Richard M.; Copping, Andrea E.; Van Cleve, Frances B.

2010-11-15

Possible environmental effects of marine and hydrokinetic (MHK) energy development are not well understood, and yet regulatory agencies are required to make decisions in spite of substantial uncertainty about environmental impacts and their long-term effects. An understanding of risk associated with likely interactions between MHK installations and aquatic receptors, including animals, habitats, and ecosystems, can help reduce the level of uncertainty and focus regulatory actions and scientific studies on interactions of most concern. As a first step in developing the Pacific Northwest National Laboratory (PNNL) Environmental Risk Evaluation System (ERES), PNNL scientists conducted a preliminary risk screening analysis on three initial MHK cases - a tidal project in Puget Sound using Open Hydro turbines, a wave project off the coast of Oregon using Ocean Power Technologies point attenuator buoys, and a riverine current project in the Mississippi River using Free Flow turbines. Through an iterative process, the screening analysis revealed that top-tier stressors in all three cases were the effects of the dynamic physical presence of the device (e.g., strike), accidents, and effects of the static physical presence of the device (e.g., habitat alteration). Receptor interactions with these stressors at the four highest tiers of risk were dominated by marine mammals (cetaceans and pinnipeds) and birds (diving and non-diving); only the riverine case (Free Flow) included different receptors in the third tier (fish) and the fourth tier (benthic invertebrates). Although this screening analysis provides a preliminary analysis of vulnerability of environmental receptors to stressors associated with MHK installations, probability analysis, especially of risk associated with chemical toxicity and accidents such as oil spills or lost gear, will be necessary to further understand high-priority risks. Subject matter expert review of this process and results is required and is

Methodology and computational framework used for the US Department of Energy Environmental Restoration and Waste Management Programmatic Environmental Impact Statement accident analysis

International Nuclear Information System (INIS)

Mueller, C.; Roglans-Ribas, J.; Folga, S.; Huttenga, A.; Jackson, R.; TenBrook, W.; Russell, J.

1994-01-01

A methodology, computational framework, and integrated PC-based database have been developed to assess the risks of facility accidents in support of the US Department of Energy (DOE) Environmental Restoration and Waste Management Programmatic Environmental Impact Statement. The methodology includes the following interrelated elements: (1) screening of storage and treatment processes and related waste inventories to determine risk-dominant facilities across the DOE complex, (2) development and frequency estimation of the risk-dominant sequences of accidents, and (3) determination of the evolution of and final compositions of radiological or chemically hazardous source terms predicted to be released as a function of the storage inventory or treatment process throughput. The computational framework automates these elements to provide source term input for the second part of the analysis which includes (1) development or integration of existing site-specific demographics and meteorological data and calculation of attendant unit-risk factors and (2) assessment of the radiological or toxicological consequences of accident releases to the general public and to the occupational work force

Methods of I-129 analysis for environmental monitoring

International Nuclear Information System (INIS)

Nomura, T.; Katagiri, H.; Kitahara, Y.; Fukuda, S.

1980-01-01

Among the radioiodine isotopes discharged from nuclear facilities, I-129 has the longest half-life (1.7 x 10 7 years) and thus environmental monitoring of this nuclide is important. Methods of analysis of low level I-129 in environmental samples such as milk, crops, seaweeds and soils are described. The iodine is separated from the dried or pulverized samples by ignition at 1000 0 C in a quartz combustion apparatus with a stream of oxygen. Stable I-127 is simultaneously determined and the atom ratio of 129 I/ 127 I calculated in order to evaluate the thyroid dose by the specific activity method. Results of an analysis of typical food samples collected near the fuel reprocessing plant of Tokai Works showed no I-129 concentrations higher than the detection limit of the method (10 -2 pCi for 10 g. dry sample). (UK)

The Analysis of Sustainable Development Content in the Syllabus of Environmental Knowledge and Plants Ecology Lecture

Science.gov (United States)

Putra, A.; Rahmat, A.; Redjeki, S.

2017-09-01

This research aims to find out how much the content of sustainable development exist in the content of environmental knowledge and plant ecology courses. The focus indicators of sustainable development indicators is the environment. This research is a qualitative research type with qualitative descriptive approach. The analyzed variables are only 2 courses, which are environmental knowledge and plants ecology. The results showed that the syllabus contents analysis of environmental knowledge and plants ecology courses in private Lembaga Pendidikan Tenaga Kependidikan (LPTK) in the province of Nusa Tenggara Barat is already good enough and the sustainable development contents is very large, almost all syllabus contents has already prioritize the sustainable development load of both the subject of environmental knowledge and plants ecology, although there are still some syllabus contents that was not includes sustainable development load, but the percentage is quite small, especially in the course of Plant Ecology.

Application of the neutron activation analysis to environmental study

International Nuclear Information System (INIS)

Fu Bozhi.

1995-01-01

Neutron activation analysis is a nuclear analysis technology. It has been developed in recent times. By this means, the paper analyzes the element contents of leaves, soil and atmospheric dust-fall from the eastern and the western suburbs of Chengdu, then makes a comparison between the two areas and approaches some problems on environmental pollution

Trace-element analysis in environmental sciences

International Nuclear Information System (INIS)

Valkovic, V.; Moschini, G.

1988-01-01

The use of charged-particle accelerators in trace-element analysis in the field of environmental sciences is described in this article. Nuclear reactions, charged-particle-induced X-ray emission as well as other nuclear and atomic processes can be used individually, or combined, in developing adequate analytical systems. In addition to concentration levels, concentration levels, concentration profiles can be measured, resulting in unique information. Some examples of experiments performed are described together with the suggestions for future measurements [pt

Environmental Management Accounting (EMA: Reflection of Environmental Factors in the Accounting Processes through the Identification of the Environmental Costs Attached to Products, Processes and Services

Directory of Open Access Journals (Sweden)

Cleopatra Sendroiu

2006-10-01

Full Text Available EMA can be defined as the identification, collection, estimation, analysis, internal reporting, and use of materials and energy flow information, environmental cost information, and other cost information for both conventional and environmental decision-making within an organization. Thus EMA incorporates and integrates two of the three building blocks of sustainable development – environment and economics – as they relate to an organization’s internal decision-making. EMA is a relatively new tool in environmental management. Decades ago environmental costs were very low, so it seemed wise to include them in the overhead account for simplicity and convenience. Recently there has been a steep rise in all environmental costs, including energy and water prices as well as liabilities.

Environmental Management Accounting (EMA: Reflection of Environmental Factors in the Accounting Processes through the Identification of the Environmental Costs Attached to Products, Processes and Services

Directory of Open Access Journals (Sweden)

Costantin Roman

2006-12-01

Full Text Available EMA can be defined as the identification, collection, estimation, analysis, internal reporting, and use of materials and energy flow information, environmental cost information, and other cost information for both conventional and environmental decision-making within an organization. Thus EMA incorporates and integrates two of the three building blocks of sustainable development – environment and economics – as they relate to an organization’s internal decision-making. EMA is a relatively new tool in environmental management. Decades ago environmental costs were very low, so it seemed wise to include them in the overhead account for simplicity and convenience. Recently there has been a steep rise in all environmental costs, including energy and water prices as well as liabilities.

American and Canadian environmental federalism: A game-theoretic analysis

Energy Technology Data Exchange (ETDEWEB)

Gillroy, J.M.

1999-07-01

To understand why environmental federalism is different in Canada and the United States, one might begin with the initial strategic realities that faced the Fathers of Canadian Confederation and the Framers of the Constitution of the US. This essay examined federalism from a game theoretic point of view, to integrate and expose the rational properties of the decision to federate and the logical entailments of that choice for environmental policy within two specific strategic contexts. Specifically, the author suggests that American environmental federalism has arisen in response to the strategic reality of a prisoner's dilemma, while Canadian environmental federalism can be analyzed as an effort to regulate confrontations within a game of chicken. In addition to the analysis of each federated structure, evidence from five case studies demonstrates the usefulness of games to the study of comparative federalism.

Geostatistical Analysis Methods for Estimation of Environmental Data Homogeneity

Directory of Open Access Journals (Sweden)

Aleksandr Danilov

2018-01-01

Full Text Available The methodology for assessing the spatial homogeneity of ecosystems with the possibility of subsequent zoning of territories in terms of the degree of disturbance of the environment is considered in the study. The degree of pollution of the water body was reconstructed on the basis of hydrochemical monitoring data and information on the level of the technogenic load in one year. As a result, the greatest environmental stress zones were isolated and correct zoning using geostatistical analysis techniques was proved. Mathematical algorithm computing system was implemented in an object-oriented programming C #. A software application has been obtained that allows quickly assessing the scale and spatial localization of pollution during the initial analysis of the environmental situation.

Results of special radiation measurements resulting from the Chernobyl accident and regional analysis of environmental radioactivity

International Nuclear Information System (INIS)

1986-07-01

This report of the SCPRI exposes an interpretation of the results concerning the monitoring of the environmental radioactivity in France following Chernobyl accident. Atmospheric dusts, milk and milk products, vegetables, water and various beverages are analyzed. More than 1500 additional food samples are presented. Regional analysis of radioactivity and human gamma-spectrometric investigations are included [fr

Identifying significant environmental features using feature recognition.

Science.gov (United States)

2015-10-01

The Department of Environmental Analysis at the Kentucky Transportation Cabinet has expressed an interest in feature-recognition capability because it may help analysts identify environmentally sensitive features in the landscape, : including those r...

Guidebook in using Cost Benefit Analysis and strategic environmental assessment for environmental planning in China

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

Environmental planning in China may benefit from greater use of Cost Benefit Analysis (CBA) and Strategic Environmental Assessment (SEA) methodologies. We provide guidance on using these methodologies. Part I and II show the principles behind the methodologies as well as their theoretical structure. Part III demonstrates the methodologies in action in a range of different good practice examples. The case studies and theoretical expositions are intended to teach by way of example as well as by understanding the principles, and to help planners use the methodologies as correctly as possible.(auth)

Environmental accounting of eco-innovations through environmental input-output analysis : The case of hydrogen and fuel cells buses

NARCIS (Netherlands)

Cantono, Simona; Heijungs, Reinout; Kleijn, Réne

The introduction of environmentally friendly innovations in both transport and energy sectors are included in the list of priorities of the European Union political agenda. This paper investigates the environmental consequences of the introduction of hydrogen and fuel cells technology in the

International Journal of Occupational Medicine and Environmental Health in world documentation services: the SCOPUS based analysis of citation.

Science.gov (United States)

Przyłuska, Jolanta

2006-01-01

A high classification of scientific journals in the ranking of international transfer of knowledge is reflected by other researchers' citations. The International Journal of Occupational Medicine and Environmental Health (IJOMEH) is an international professional quarterly focused on such areas as occupational medicine, toxicology and environmental health edited in Poland. IJOMEH, published in English, is indexed in numerous world information services (MEDLINE, EMBASE, EBSCO, SCOPUS). This paper presents the contribution of IJOMEH publications to the world circulation of scientific information based on the citation analysis. The analysis, grounded on the SCOPUS database, assessed the frequency of citations in the years 1996-2005. Journals in which they have been cited were retrieved and their list is also included.

Dual discounting in cost-benefit analysis for environmental impacts

International Nuclear Information System (INIS)

Kula, Erhun; Evans, David

2011-01-01

Discounting has been a long-established intertemporal efficiency tool in cost-benefit analysis which focuses on project selection at communal level with a view to maximising the social welfare. However, with the relentless growth in environmental stress that, in good parts, stems from investment projects the established criterion in discounting appears to be inadequate especially when environmental issues are taken into consideration. This paper looks at how dual focus on efficiency and sustainability can be achieved by using dual discounting, i.e. discounting environmental benefits separately and differently from other costs and benefits and applies this alternative criterion to an afforestation scheme in the United Kingdom which contains carbon sequestration in addition to timber benefits.

Integrated environmental policy: A review of economic analysis.

Science.gov (United States)

Wiesmeth, Hans; Häckl, Dennis

2017-04-01

Holistic environmental policies, which emerged from a mere combination of technical activities in waste management some 40 years ago, constitute the most advanced level of environmental policies. These approaches to environmental policy, among them the policies in integrated waste management, attempt to guide economic agents to an environment-friendly behaviour. Nevertheless, current holistic policies in waste management, including policies on one-way drinks containers and waste electrical and electronic equipment, and implementations of extended producer responsibility with further applications to waste electrical and electronic equipment, reveal more or less severe deficiencies - despite some positive examples. This article relates these policy failures, which are not necessarily the result of an insufficient compliance with the regulations, to missing constitutive elements of what is going to be called an 'integrated environmental policy'. This article therefore investigates - mostly from a practical point of view - constitutive elements, which are necessary for a holistic policy to serve as a well-functioning allocation mechanism. As these constitutive elements result from a careful 'integration' of the environmental commodities into the economic allocation problems, we refer to these policies as 'integrated environmental policies'. The article also discusses and illustrates the main steps of designing such a policy - for waste electrical and electronic equipment and a (possible) ban of Glyphosat in agriculture. As these policies are dependent on economic and political stability with environmental awareness sufficiently developed, the article addresses mostly waste management policies in highly industrialised countries.

Environmental problem analysis of the proposed Sage Creek Coal Project in the Flathead Valley of British Columbia

Energy Technology Data Exchange (ETDEWEB)

1981-01-01

The proposed Sage Creek Coal Project is analysed with respect to environmental impacts, international concerns and public concerns. Although information available to date is insufficient to pursue an analysis enabling a determination of the full social and environmental cost of the project, basic concerns and issues have been elucidated. Emphasis is given to the potential adverse effects on existing fish species and on wildlife species, particularly grizzly bear, moose and mountain goat. Because the area affected by the project includes both Canadian and U.S. territory, environmental objectives of the U.S. government for the Upper Flathead Valley ecosystem must also be considered in any future B.C. government decisions. Public opposition to the project from an environmental standpoint is documented. The report concludes the preferred option for a Ministry of Environment position is to recommend the project not proceed.

GIS and correlation analysis of geo-environmental variables ...

African Journals Online (AJOL)

GIS and correlation analysis of geo-environmental variables influencing malaria prevalence in the Saboba district of Northern Ghana. ... The study also applied spline interpolation technique to map malaria prevalence in the district using standardised malaria incidence. The result indicates that distance to marshy areas is ...

Sensitivity analysis of a low-level waste environmental transport code

International Nuclear Information System (INIS)

Hiromoto, G.

1989-01-01

Results are presented from a sensivity analysis of a computer code designed to simulate the environmental transport of radionuclides buried at shallow land waste repositories. A sensitivity analysis methodology, based on the surface response replacement and statistic sensitivity estimators, was developed to address the relative importance of the input parameters on the model output. Response surface replacement for the model was constructed by stepwise regression, after sampling input vectors from range and distribution of the input variables, and running the code to generate the associated output data. Sensitivity estimators were compute using the partial rank correlation coefficients and the standardized rank regression coefficients. The results showed that the tecniques employed in this work provides a feasible means to perform a sensitivity analysis of a general not-linear environmental radionuclides transport models. (author) [pt

Specialists meeting on properties of primary circuit structural materials including environmental effects

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-07-01

The Specialists Meeting on Properties of Primary Circuit Structural Materials of LMFBRs covered the following topics: overview of materials program in different countries; mechanical properties of materials in air; fracture mechanics studies - component related activities; impact of environmental influences on mechanical properties; relationship of material properties and design methods. The purpose of the meeting was to provide a forum for exchange of information on structural materials behaviour in primary circuit of fast breeder reactors. Special emphasis was placed on environmental effects such as influence of sodium and irradiation on mechanical properties of reactor materials.

Specialists meeting on properties of primary circuit structural materials including environmental effects

International Nuclear Information System (INIS)

1977-01-01

The Specialists Meeting on Properties of Primary Circuit Structural Materials of LMFBRs covered the following topics: overview of materials program in different countries; mechanical properties of materials in air; fracture mechanics studies - component related activities; impact of environmental influences on mechanical properties; relationship of material properties and design methods. The purpose of the meeting was to provide a forum for exchange of information on structural materials behaviour in primary circuit of fast breeder reactors. Special emphasis was placed on environmental effects such as influence of sodium and irradiation on mechanical properties of reactor materials

Modern Trends in Neutron Activation Analysis. Applications to some African Environmental Samples

International Nuclear Information System (INIS)

Hassan, A.M.

2009-01-01

This review covers the results of several published articles which deal with the modern trends in neutron activation analysis techniques using some of African research reactors for some environmental samples. The samples used have been collected from different areas in Egypt, South Africa, Ghana, Morocco, Nigeria, and Algeria. The neutron irradiation facilities and the advanced detection systems in each country are outlined. The prompt and delayed gamma-rays emitted due to neutron capture have been applied for investigation of the elemental constituents of such samples. Covered applications include exploration, mining, industrial environment, pollution of air, foodstuffs, soils and irrigation water samples. Some of the developed software programmes as well as the modern methods of data analysis are presented. The thermal and epithermal neutron activation analysis techniques have been applied for estimation of major, minor and trace elements in each material. Some of these data are presented with several comments.

Environmental systems analysis of biogas systems-Part II: The environmental impact of replacing various reference systems

International Nuclear Information System (INIS)

Boerjesson, Pal; Berglund, Maria

2007-01-01

This paper analyses the overall environmental impact when biogas systems are introduced and replace various reference systems for energy generation, waste management and agricultural production. The analyses are based on Swedish conditions using a life-cycle perspective. The biogas systems included are based on different combinations of raw materials and final use of the biogas produced (heat, power and transportation fuel). A general conclusion is that biogas systems normally lead to environmental improvements, which in some cases are considerable. This is often due to indirect environmental benefits of changed land use and handling of organic waste products (e.g. reduced nitrogen leaching, emissions of ammonia and methane), which often exceed the direct environmental benefits achieved when fossil fuels are replaced by biogas (e.g. reduced emissions of carbon dioxide and air pollutants). Such indirect benefits are seldom considered when biogas is evaluated from an environmental point of view. The environmental impact from different biogas systems can, however, vary significantly due to factors such as the raw materials utilised, energy service provided and reference system replaced

Environmental risk analysis for nanomaterials: Review and evaluation of frameworks

DEFF Research Database (Denmark)

Grieger, Khara Deanne; Linkov, Igor; Hansen, Steffen Foss

2012-01-01

to occupational settings with minor environmental considerations, and most have not been thoroughly tested on a wide range of NM. Care should also be taken when selecting the most appropriate risk analysis strategy for a given risk context. Given this, we recommend a multi-faceted approach to assess...... the environmental risks of NM as well as increased applications and testing of the proposed frameworks for different NM....

Improvement on a science curriculum including experimental demonstration of environmental radioactivity for secondary school students

International Nuclear Information System (INIS)

Watanabe, Kenji; Matsubara, Shizuo; Aiba, Yoshio; Eriguchi, Hiroshi; Kiyota, Saburo; Takeyama, Tetsuji.

1988-01-01

A science curriculum previously prepared for teaching environmental radioactivity was modified on the basis of the results of trial instructions in secondary schools. The main subject of the revised curriculum is an understanding of the natural radioactivity through the experimental demonstration about air-borne β and γ ray emitters. The other subjects included are the radioactive decay, the biological effects of radiation, the concept of risk-benefit balance (acceptable level) and the peaceful uses of nuclear energy and radiation. The work sheets and reference data prepared as learning materials are in two levels corresponding to the ability of students for this curriculum. (author)

Politics and the Environmental Agenda.

Science.gov (United States)

Rogers, Adam

1992-01-01

Discusses the role of environmental protection in the 1992 presidential election. Includes an analysis of the positions taken by George Bush and Dan Quayle, Bill Clinton and Al Gore. Presents George Bush's "environmental" record during his tenure as President of the United States as well as those of Quayle, Gore, and Clinton. (MCO)

Relating the environmental impact of consumption to household expenditures. An input-output analysis

International Nuclear Information System (INIS)

Kerkhof, Annemarie C.; Nonhebel, Sanderine; Moll, Henri C.

2009-01-01

In this paper we evaluate the relationships between household expenditures and the environmental impact categories climate change, acidification, eutrophication and smog formation, by combining household expenditures with environmentally extended input-output analysis. Expenditure elasticities are examined with regression analysis, and are compared and interpreted on the basis of insight at the product level. With data from the Netherlands in the year 2000, we find that environmental impact increases with increasing household expenditures, although the degree to which the environmental impact increases differs per impact category. Climate change and eutrophication increase less than proportionally with increasing expenditures. Acidification increases nearly proportionally with increasing expenditures, whereas smog formation increases more than proportionally. It appears that the mix of necessities and luxuries to which an environmental impact is related is essential in explaining the relationship. (author)

Development of environmental education system using online element analysis

International Nuclear Information System (INIS)

Niizeki, T.; Yoshihara, T.; Tsuchiya, K.; Kawasaki, K.; Komiya, K.

2007-01-01

We have constructed a network system which enables one to access and analyze environmental data obtained at different and distant laboratories. As a preliminary feasibility test of the system, we studied the elements in the water of the Tesio River using PIXE and ion chromatography. Students used the data online to carry out analysis via internet. We found two factors with different features in calcium from the factor analysis. The comparison of the specific result and relevant geology information has revealed a remarkable presence of Ca 2+ which might come from dissolution of limestone in the upper Tesio River. PIXE data gave crucial information to draw such a conclusion. The present system has been found useful in environmental education in universities, online sharing of PIXE data in particular. (author)

Neutron activation analysis for environmental sample in Thailand

International Nuclear Information System (INIS)

Busamongkol, Arporn; Nouchpramool, Sunun; Bunprapob, Supamatthree; Sumitra, Tatchai

2003-01-01

Neutron Activation Analysis has been applied for the trace elements analysis in environmental samples. Thirty three samples of airborne particulate were collected every week at Ongkharak Nuclear Research Center (ONRC) during the period of June 1998 to March 1999. The Ti, I, Mg, Na, V, K, Cl, Al, Mn, Ca, As, Sm, Sb, Br, La, Ce, Th, Cr, Cs, Sc, Rb, Fe, Zn and Co were analyzed by Neutron Activation Analysis utilizing 2 MW TRIGA MARK III research reactor. The certified reference materials 1632a and 1633a from National Bureau of Standard were select as standard. (author)

Construction of a scattering chamber for ion-beam analysis of environmental materials in undergraduate physics research

Energy Technology Data Exchange (ETDEWEB)

LaBrake, Scott M.; Vineyard, Michael F.; Turley, Colin F.; Moore, Robert D.; Johnson, Christopher [Department of Physics and Astronomy Union College, Schenectady, NY 12308 (United States)

2013-04-19

We have developed a new scattering chamber for ion-beam analysis of environmental materials with the 1.1-MV Pelletron accelerator at the Union College Ion-Beam Analysis Laboratory. The chamber was constructed from a ten-inch, Conflat, multi-port cross and includes a three-axis target manipulator and target ladder assembly, an eight-inch turbo pump, an Amptek X-ray detector, and multiple charged particle detectors. Recent projects performed by our undergraduate research team include proton induced X-ray emission (PIXE) and Rutherford backscattering (RBS) analyses of atmospheric aerosols collected with a nine-stage cascade impactor in Upstate New York. We will describe the construction of the chamber and discuss the results of some commissioning experiments.

Techno-economic and environmental analysis of low carbon energy technologies: Indian perspective

Energy Technology Data Exchange (ETDEWEB)

Saha, Vijay Prakash; Kumar, Rahul; Kumar, Manish; Deswal, Surinder; Chandna, Pankaj

2010-09-15

In this paper, techno-economic and an environmental investigation and analysis of Low Carbon Technologies (LCTs) has been presented, with special emphasis on India. The paper identify, analyze and recommend, on the basis of available and collected / collated information and data, the promising and potential low carbon energy technology options suited to Indian conditions for grid connected power generation. The evaluation criteria adopted include - emission reduction potential, technological feasibility, and economic viability; and on its basis recommend a detailed action plan and strategy for guiding future research and development with a more focused approach considering current Indian policy framework.

Environmental Chemical Analysis (by B. B. Kebbekus and S. Mitra)

Science.gov (United States)

Bower, Reviewed By Nathan W.

1999-11-01

package overall, although I might personally prefer a chapter on environmental chemometrics as well. Most of the major instrumental methods actively employed in environmental analysis are treated either in the theoretical chapters or in the later application chapters. These include introductions to UV­vis, FTIR, SFC, HPLC, IC (but not CE), GC, GC­MS, ISEs, anodic stripping, FAA, GFAA, XRF, ICP, ICP­MS, and even two pages on the basics of immunoassays. Although this text provides an update of the earlier book, its greatest failing is a particular strength of the first text: it fails to provide any detailed references within the text, relying on an average of five generic "suggested readings" at the end of each chapter. Even tables such as "Some US drinking water quality standards" give no references, setting a bad example for students who have to write research papers of their own. As it also does not provide the detailed procedures or fine-quality figures that were available in the earlier text, it is not worth as much as a reference book or for library acquisitions. In the first book the detailed procedures served as a "lab manual within the text" and this increased its pedagogic value tremendously. Still, this text does make use of generalized procedures to step through many of the standard methods encountered by practicing environmental scientists, and the tables are in most cases superior to those in similar texts, lacking only the references to make them as useful as they might be. A second weakness of note comes from the organization. Having two different parts of the book covering material that relates to each of the instrumental methods means that it is not always clear where the reader should go to find information that relates to a particular method. For example, specifics on sampling equipment for water and soils appear in the chapter on sampling, but for air they appear in the applications section. Similarly, the sample preparation chapter would make more

Environmental performance evaluation of Beijing's energy use planning

International Nuclear Information System (INIS)

Wang Lei; Xu Linyu; Song Huimin

2011-01-01

In line with rapid economic development, urban energy consumption is increasing rapidly, resulting in environmental problems. After considering several methods to evaluate the environmental performance of energy use, including: energy ecological footprint, input-output analysis, emergy-exergy analysis, and multi-criteria decision-making, an environmental performance evaluation model is proposed, which combines the analytical hierarchy process, fuzzy extent analysis, and membership degree analysis. In the model, 18 sub-indicators of environmental performance from energy use planning are classified into four categories: structure of energy use and industry, technology and efficiency of energy use, environmental impacts caused by energy use, and the socio-economic benefits of energy use. Membership degree analysis is applied to each indicator. Three energy use scenarios which are, respectively, environment-friendly, technology-led, and economic policy-led are evaluated. The results show that the technology-led energy use planning is best. The sustainable energy use policies are proposed from three aspects, including optimizing the energy use and industrial structure, encouraging development of energy-saving and air pollution control technologies, and enhancing legislation on energy use management. The policies are helpful to optimize the trade-offs between economic growth and environmental protection in Beijing. - Highlights: → Our paper establishes a system of indicators according to the structure of urban energy use planning. → We have created a comprehensive environmental performance evaluation model in the research. → The model and results can serve as an important basis for decision-making to guide local government.

Automated analysis of off-line measured gamma-spectra using UniSampo gamma-ray spectrum analysis software including criterias for alarming systems

International Nuclear Information System (INIS)

Nikkinen, M.T.

2005-01-01

In many laboratories the number of measured routine gamma-spectra can be significant and the labour work to review all the data is time consuming and expensive task. In many cases the routine sample does not normally contain radiation above a detectable level, and still the review of the spectra has to be performed. By introducing simple rules for emerging conditions, the review work can be significantly reduced. In one case the need to review the environmental measurement spectra was reduced to less than 1% compared to the original need, which in turn made the review personnel available for more useful functions. Using the UniSampo analysis system, the analysis results of spectra that are causing alarming conditions can be transmitted via e-mail to any address. Some systems are even equipped with the capability to forward these results to hand-portable telephones or pagers. This is a very practical solution for automated environmental monitoring, when the sample spectra are collected automatically and transmitted to central computer for further analysis. Set up of an automatic analysis system, rules for the emerging conditions, technical solutions for an automated alarming system and a generic hypothesis test for the alarming system developed for UniSampo analysis software are described. (author)

Technical- and environmental-efficiency analysis of irrigated cotton-cropping systems in Punjab, Pakistan using data envelopment analysis.

Science.gov (United States)

Ullah, Asmat; Perret, Sylvain R

2014-08-01

Cotton cropping in Pakistan uses substantial quantities of resources and adversely affects the environment with pollutants from the inputs, particularly pesticides. A question remains regarding to what extent the reduction of such environmental impact is possible without compromising the farmers' income. This paper investigates the environmental, technical, and economic performances of selected irrigated cotton-cropping systems in Punjab to quantify the sustainability of cotton farming and reveal options for improvement. Using mostly primary data, our study quantifies the technical, cost, and environmental efficiencies of different farm sizes. A set of indicators has been computed to reflect these three domains of efficiency using the data envelopment analysis technique. The results indicate that farmers are broadly environmentally inefficient; which primarily results from poor technical inefficiency. Based on an improved input mix, the average potential environmental impact reduction for small, medium, and large farms is 9, 13, and 11 %, respectively, without compromising the economic return. Moreover, the differences in technical, cost, and environmental efficiencies between small and medium and small and large farm sizes were statistically significant. The second-stage regression analysis identifies that the entire farm size significantly affects the efficiencies, whereas exposure to extension and training has positive effects, and the sowing methods significantly affect the technical and environmental efficiencies. Paradoxically, the formal education level is determined to affect the efficiencies negatively. This paper discusses policy interventions that can improve the technical efficiency to ultimately increase the environmental efficiency and reduce the farmers' operating costs.

Is nuclear power just another environmental issue. an analysis of california voters

International Nuclear Information System (INIS)

Webber, D.J.

1982-01-01

An analysis of 1976 California primary voters who voted on the nuclear power proposition indicates that both nuclear power opinion and general environmental attitude have similar patterns of demographic and political correlates, as earlier environmental opinion research has reported. Nuclear power attitudes, however, are characterized by a much larger partisan and ideological component than is the general environmental attitude. In explaining the 35% of respondents with ''inconsistent'' nuclear and environmental attitudes, only education and income are significantly linked to consistency

Dynamic Analysis and Research on Environmental Pollution in China from 1992 to 2014

Science.gov (United States)

Sun, Fei; Yuan, Peng; Li, Huiting; Zhang, Moli

2018-01-01

The regular pattern of development of the environmental pollution events was analyzed from the perspective of statistical analysis of pollution events in recent years. The Moran, s I and spatial center-of-gravity shift curve of China, s environmental emergencies were calculated by ARCGIS software. And the method is global spatial analysis and spatial center of gravity shift. The results showed that the trend of China, s environmental pollution events from 1992 to 2014 was the first dynamic growth and then gradually reduced. Environmental pollution events showed spatial aggregation distribution in 1992-1994, 2001-2006, 2008-2014, and the rest of year was a random distribution of space. There were two stages in China, s environmental pollution events: The transition to the southwest from 1992 to 2006 and the transition to the northeast from the year of 2006 to 2014.

Exploring the existence of Kuznets curve in countries' environmental efficiency using DEA window analysis

International Nuclear Information System (INIS)

Halkos, George Emm.; Tzeremes, Nickolaos G.

2009-01-01

This paper, using data envelopment (DEA) window analysis and generalized method of moments (GMM) estimators, examines the existence of a Kuznets type relationship between countries' environmental efficiency and national income. Specifically, it measures the environmental efficiency of 17 OECD countries by constructing environmental efficiency ratios for the time period 1980-2002. The analysis with the application of dynamic panel data reveals that there isn't a Kuznets type relationship between environmental efficiency and income. Allowing for dynamic effects we find that the adjustment to the target ratio is instantaneous. We also find that increased economic activity does not always ensure environmental protection and thus the path of growth is important in addition to the growth itself. (author)

Visualizing data for environmental analysis

International Nuclear Information System (INIS)

Benson, J.

1997-01-01

The Environmental Restoration Project at Los Alamos National Laboratory (LANL) has over 11,000 sampling locations in a 44 square mile area. The sample analyses contain raw analytical chemistry values for over 2,300 analytes and compounds used to define and remediate contaminated areas at LANL. The data consist of 2.5 million records in an oracle database. Maps are often used to visualize the data. Problems arise when a client specifies a particular kind of map without fully understanding the limitations of the data or the map. The ability of maps to convey information is dependent on many factors, though all maps are data dependent. The quantity, spatial distribution, and numerical range of the data can limit use with certain kinds of maps. To address these issues and educate the clients, several types of statistical maps (e.g., choropleth, isarithm, and graduated symbol such as bubble and spike) used for environmental analysis were chosen to show the advantages, disadvantages, and data limitations of each. By examining both the complexity of the analytical data and the limitations of the map type, it is possible to consider how reality has been transformed through the map, and if that transformation accurately conveys the information present

Visualizing data for environmental analysis

Energy Technology Data Exchange (ETDEWEB)

Benson, J.

1997-04-01

The Environmental Restoration Project at Los Alamos National Laboratory (LANL) has over 11,000 sampling locations in a 44 square mile area. The sample analyses contain raw analytical chemistry values for over 2,300 analytes and compounds used to define and remediate contaminated areas at LANL. The data consist of 2.5 million records in an oracle database. Maps are often used to visualize the data. Problems arise when a client specifies a particular kind of map without fully understanding the limitations of the data or the map. The ability of maps to convey information is dependent on many factors, though all maps are data dependent. The quantity, spatial distribution, and numerical range of the data can limit use with certain kinds of maps. To address these issues and educate the clients, several types of statistical maps (e.g., choropleth, isarithm, and graduated symbol such as bubble and spike) used for environmental analysis were chosen to show the advantages, disadvantages, and data limitations of each. By examining both the complexity of the analytical data and the limitations of the map type, it is possible to consider how reality has been transformed through the map, and if that transformation accurately conveys the information present.

A Sensitivity Analysis Approach to Identify Key Environmental Performance Factors

Directory of Open Access Journals (Sweden)

Xi Yu

2014-01-01

Full Text Available Life cycle assessment (LCA is widely used in design phase to reduce the product’s environmental impacts through the whole product life cycle (PLC during the last two decades. The traditional LCA is restricted to assessing the environmental impacts of a product and the results cannot reflect the effects of changes within the life cycle. In order to improve the quality of ecodesign, it is a growing need to develop an approach which can reflect the changes between the design parameters and product’s environmental impacts. A sensitivity analysis approach based on LCA and ecodesign is proposed in this paper. The key environmental performance factors which have significant influence on the products’ environmental impacts can be identified by analyzing the relationship between environmental impacts and the design parameters. Users without much environmental knowledge can use this approach to determine which design parameter should be first considered when (redesigning a product. A printed circuit board (PCB case study is conducted; eight design parameters are chosen to be analyzed by our approach. The result shows that the carbon dioxide emission during the PCB manufacture is highly sensitive to the area of PCB panel.

Idaho National Engineering Laboratory (INEL) Environmental Restoration (ER) Program Baseline Safety Analysis File (BSAF)

International Nuclear Information System (INIS)

1995-09-01

The Baseline Safety Analysis File (BSAF) is a facility safety reference document for the Idaho National Engineering Laboratory (INEL) environmental restoration activities. The BSAF contains information and guidance for safety analysis documentation required by the U.S. Department of Energy (DOE) for environmental restoration (ER) activities, including: Characterization of potentially contaminated sites. Remedial investigations to identify and remedial actions to clean up existing and potential releases from inactive waste sites Decontamination and dismantlement of surplus facilities. The information is INEL-specific and is in the format required by DOE-EM-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports. An author of safety analysis documentation need only write information concerning that activity and refer to BSAF for further information or copy applicable chapters and sections. The information and guidance provided are suitable for: sm-bullet Nuclear facilities (DOE Order 5480-23, Nuclear Safety Analysis Reports) with hazards that meet the Category 3 threshold (DOE-STD-1027-92, Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports) sm-bullet Radiological facilities (DOE-EM-STD-5502-94, Hazard Baseline Documentation) Nonnuclear facilities (DOE-EM-STD-5502-94) that are classified as open-quotes lowclose quotes hazard facilities (DOE Order 5481.1B, Safety Analysis and Review System). Additionally, the BSAF could be used as an information source for Health and Safety Plans and for Safety Analysis Reports (SARs) for nuclear facilities with hazards equal to or greater than the Category 2 thresholds, or for nonnuclear facilities with open-quotes moderateclose quotes or open-quotes highclose quotes hazard classifications

Idaho National Engineering Laboratory (INEL) Environmental Restoration (ER) Program Baseline Safety Analysis File (BSAF)

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

The Baseline Safety Analysis File (BSAF) is a facility safety reference document for the Idaho National Engineering Laboratory (INEL) environmental restoration activities. The BSAF contains information and guidance for safety analysis documentation required by the U.S. Department of Energy (DOE) for environmental restoration (ER) activities, including: Characterization of potentially contaminated sites. Remedial investigations to identify and remedial actions to clean up existing and potential releases from inactive waste sites Decontamination and dismantlement of surplus facilities. The information is INEL-specific and is in the format required by DOE-EM-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports. An author of safety analysis documentation need only write information concerning that activity and refer to BSAF for further information or copy applicable chapters and sections. The information and guidance provided are suitable for: {sm_bullet} Nuclear facilities (DOE Order 5480-23, Nuclear Safety Analysis Reports) with hazards that meet the Category 3 threshold (DOE-STD-1027-92, Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports) {sm_bullet} Radiological facilities (DOE-EM-STD-5502-94, Hazard Baseline Documentation) Nonnuclear facilities (DOE-EM-STD-5502-94) that are classified as {open_quotes}low{close_quotes} hazard facilities (DOE Order 5481.1B, Safety Analysis and Review System). Additionally, the BSAF could be used as an information source for Health and Safety Plans and for Safety Analysis Reports (SARs) for nuclear facilities with hazards equal to or greater than the Category 2 thresholds, or for nonnuclear facilities with {open_quotes}moderate{close_quotes} or {open_quotes}high{close_quotes} hazard classifications.

Socioeconomic Drivers of Environmental Pollution in China: A Spatial Econometric Analysis

Directory of Open Access Journals (Sweden)

Jianmin Liu

2017-01-01

Full Text Available This paper studies the environmental pollution and its impacts in China using prefecture-level cities and municipalities data. Moran’s I, the widely used spatial autocorrelation index, provides a fairly strong pattern of spatial clustering of environmental pollution and suggests a fairly high stability of the positive spatial correlation. To investigate the driving forces of environmental pollution and explore the relationship between fiscal decentralization, economic growth, and environmental pollution, spatial Durbin model is used for this analysis. The result shows that fiscal decentralization of local unit plays a significant role in promoting the environmental pollution and the feedback effect of fiscal decentralization on environmental pollution is also positive, though it is not significant. The relationship of GDP per capita and environmental pollution shows inverted U-shaped curve. Due to the scale effect of secondary industry, the higher the level of secondary industry development in a unit is, the easier it is to attract the secondary industry in adjacent units, which mitigates the environmental pollution in adjacent units. Densely populated areas tend to deteriorate local environment, but environmental regulation in densely populated areas is often tighter than other areas, which reduces environmental pollution to a certain extent.

Practical Ranges of Loudness Levels of Various Types of Environmental Noise, Including Traffic Noise, Aircraft Noise, and Industrial Noise

Directory of Open Access Journals (Sweden)

Sabine A. Janssen

2011-05-01

Full Text Available In environmental noise control one commonly employs the A-weighted sound level as an approximate measure of the effect of noise on people. A measure that is more closely related to direct human perception of noise is the loudness level. At constant A-weighted sound level, the loudness level of a noise signal varies considerably with the shape of the frequency spectrum of the noise signal. In particular the bandwidth of the spectrum has a large effect on the loudness level, due to the effect of critical bands in the human hearing system. The low-frequency content of the spectrum also has an effect on the loudness level. In this note the relation between loudness level and A-weighted sound level is analyzed for various environmental noise spectra, including spectra of traffic noise, aircraft noise, and industrial noise. From loudness levels calculated for these environmental noise spectra, diagrams are constructed that show the relation between loudness level, A‑weighted sound level, and shape of the spectrum. The diagrams show that the upper limits of the loudness level for broadband environmental noise spectra are about 20 to 40 phon higher than the lower limits for narrowband spectra, which correspond to the loudness levels of pure tones. The diagrams are useful for assessing limitations and potential improvements of environmental noise control methods and policy based on A-weighted sound levels.

Analysis of the Environmental Impact on Remanufacturing Wind Turbines

Science.gov (United States)

Sosa Skrainka, Manuel R.

To deliver clean energy the use of wind turbines is essential. In June 2011 there was an installed wind capacity equivalent to 211,000MW world-wide (WWEA, 2011). By the end of the year 2009 the U.S. had 35,100MW of wind energy installed capacity to generate electricity (AWEA, 2010). This industry has grown in recent years and is expected to grow even more in the future. The environmental impacts that will arise from the increased number of wind turbines and their end-of-life should be addressed, as large amounts of resources will be required to satisfy the current and future market demands for wind turbines. Since future 10MW wind turbines are expected to be as heavy as 1000 tons each, the study of the environmental response of profitable retirement strategies, such as remanufacturing for these machines, must be considered. Because of the increased number of wind turbines and the materials used, this study provides a comparison between the environmental impacts from remanufacturing the components installed inside the nacelle of multi-megawatt wind turbines and wind turbines manufactured using new components. The study methodology is the following: • Describe the life-cycle and the materials and processes employed for the manufacture and remanufacturing for components inside the nacelle. • Identify remanufacturing alternatives for the components inside the nacelle at the end of the expected life-time service of wind turbines. • Evaluate the environmental impacts from the remanufactured components and compare the results with the impacts of the manufacturing of new components using SimaPro. • Conduct sensitivity analysis over the critical parameters of the life cycle assessment • Propose the most environmentally friendly options for the retirement of each major component of wind turbines. After an analysis of the scenarios the goal of the study is to evaluate remanufacturing as an end-of-life option from an environmental perspective for commercial multi

Evaluation of conservatisms and environmental effects in ASME Code, Section III, Class 1 fatigue analysis

International Nuclear Information System (INIS)

Deardorff, A.F.; Smith, J.K.

1994-08-01

This report documents the results of a study regarding the conservatisms in ASME Code Section 3, Class 1 component fatigue evaluations and the effects of Light Water Reactor (LWR) water environments on fatigue margins. After review of numerous Class 1 stress reports, it is apparent that there is a substantial amount of conservatism present in many existing component fatigue evaluations. With little effort, existing evaluations could be modified to reduce the overall predicted fatigue usage. Areas of conservatism include design transients considerably more severe than those experienced during service, conservative grouping of transients, conservatisms that have been removed in later editions of Section 3, bounding heat transfer and stress analysis, and use of the ''elastic-plastic penalty factor'' (K 3 ). Environmental effects were evaluated for two typical components that experience severe transient thermal cycling during service, based on both design transients and actual plant data. For all reasonable values of actual operating parameters, environmental effects reduced predicted margins, but fatigue usage was still bounded by the ASME Section 3 fatigue design curves. It was concluded that the potential increase in predicted fatigue usage due to environmental effects should be more than offset by decreases in predicted fatigue usage if re-analysis were conducted to reduce the conservatisms that are present in existing component fatigue evaluations

Use of county level data in health, energy, demographic, environmental, and economic analysis

Energy Technology Data Exchange (ETDEWEB)

Morris, S.C.; Novak, K.M.; Calef, C.E. (eds.)

1979-04-01

This document is an edited record of the conversation, dialogues, and topical discussions of the participants of a computer conference sponsored by the Biomedical and Environmental Assessment Division of Brookhaven National Laboratory during the period March 4-28, 1977. The main objective of the conference was to bring together a number of individual specialists from a wide and diverse range of both academic and professional disciplines to address the usage of county level data in health, energy, demographic, environmental, and economic analysis. A secondary aim of the conference was to test the feasibility and viability of using a computer conference as a means of accomplishing our primary objective. A preface, a list of participants, and the transcript of the main conference and subsession proceedings are included. Also included are information provided by participants on the identification of intercensal county equivalent areas and additional reports and documents relevant to the conference topic. The overall aims and objectives of the conference were successfully accomplished; some of the problems encountered using the computer as a conference vehicle were noted; recommendations were made to continue both formal and informal lines of communication on the subject of county level data.

Reporter gene bioassays in environmental analysis.

Science.gov (United States)

Köhler, S; Belkin, S; Schmid, R D

2000-01-01

In parallel to the continuous development of increasingly more sophisticated physical and chemical analytical technologies for the detection of environmental pollutants, there is a progressively more urgent need also for bioassays which report not only on the presence of a chemical but also on its bioavailability and its biological effects. As a partial fulfillment of that need, there has been a rapid development of biosensors based on genetically engineered bacteria. Such microorganisms typically combine a promoter-operator, which acts as the sensing element, with reporter gene(s) coding for easily detectable proteins. These sensors have the ability to detect global parameters such as stress conditions, toxicity or DNA-damaging agents as well as specific organic and inorganic compounds. The systems described in this review, designed to detect different groups of target chemicals, vary greatly in their detection limits, specificity, response times and more. These variations reflect on their potential applicability which, for most of the constructs described, is presently rather limited. Nevertheless, present trends promise that additional improvements will make microbial biosensors an important tool for future environmental analysis.

Comparative analysis of environmental impacts of agricultural production systems, agricultural input efficiency, and food choice

Science.gov (United States)

Clark, Michael; Tilman, David

2017-06-01

Global agricultural feeds over 7 billion people, but is also a leading cause of environmental degradation. Understanding how alternative agricultural production systems, agricultural input efficiency, and food choice drive environmental degradation is necessary for reducing agriculture’s environmental impacts. A meta-analysis of life cycle assessments that includes 742 agricultural systems and over 90 unique foods produced primarily in high-input systems shows that, per unit of food, organic systems require more land, cause more eutrophication, use less energy, but emit similar greenhouse gas emissions (GHGs) as conventional systems; that grass-fed beef requires more land and emits similar GHG emissions as grain-feed beef; and that low-input aquaculture and non-trawling fisheries have much lower GHG emissions than trawling fisheries. In addition, our analyses show that increasing agricultural input efficiency (the amount of food produced per input of fertilizer or feed) would have environmental benefits for both crop and livestock systems. Further, for all environmental indicators and nutritional units examined, plant-based foods have the lowest environmental impacts; eggs, dairy, pork, poultry, non-trawling fisheries, and non-recirculating aquaculture have intermediate impacts; and ruminant meat has impacts ∼100 times those of plant-based foods. Our analyses show that dietary shifts towards low-impact foods and increases in agricultural input use efficiency would offer larger environmental benefits than would switches from conventional agricultural systems to alternatives such as organic agriculture or grass-fed beef.

Socio-Environmental Health Analysis in Nogales, Sonora, Mexico.

Science.gov (United States)

Norman, Laura M; Caldeira, Felipe; Callegary, James; Gray, Floyd; O' Rourke, Mary Kay; Meranza, Veronica; Van Rijn, Saskia

2012-06-01

In Nogales, Sonora, Mexico, some neighborhoods, or colonias, have intermittent delivery of water through pipes from the city of Nogales's municipal water-delivery system while other areas lack piped water and rely on water delivered by truck or pipas. This research examined how lifestyles, water quality, and potential disease response, such as diarrhea, differs seasonally from a colonia with access to piped water as opposed to one using alternative water-delivery systems. Water samples were collected from taps or spigots at homes in two Nogales colonias. One colonia reflected high socio-environmental conditions where residents are supplied with municipal piped water (Colonia Lomas de Fatima); the second colonia reflected low socio-environmental conditions, lacking access to piped water and served by pipas (Colonia Luis Donaldo Colosio). A survey was developed and implemented to characterize perceptions of water quality, health impacts, and quality of life. Water samples were analyzed for microbial and inorganic water-quality parameters known to impact human health including, Escherichia coli (E. coli), total coliform bacteria, arsenic, and lead. A total of 21 households agreed to participate in the study (14 in Colosio and 7 in Fatima). In both colonias metal concentrations from water samples were all well below the United States Environmental Protection Agency's (US EPA's) maximum contaminant levels. E. coli concentrations exceeded the US EPA's drinking-water standard in Colosio but not Fatima. Total coliform bacteria were present in over 50 % of households in both colonias. Microbial contamination was significantly higher in the summer than in the winter in both colonias. Resulting analysis suggests that residents in colonias without piped water are at a greater risk of gastrointestinal illness from consumption of compromised drinking water. Our survey corroborated reports of gastrointestinal illness in the summer months but not in the winter. Chloride was found

Upgraded safety analysis document including operations policies, operational safety limits and policy changes. Revision 2

International Nuclear Information System (INIS)

Batchelor, K.

1996-03-01

The National Synchrotron Light Source Safety Analysis Reports (1), (2), (3), BNL reports number-sign 51584, number-sign 52205 and number-sign 52205 (addendum) describe the basic Environmental Safety and Health issues associated with the department's operations. They include the operating envelope for the Storage Rings and also the rest of the facility. These documents contain the operational limits as perceived prior or during construction of the facility, much of which still are appropriate for current operations. However, as the machine has matured, the experimental program has grown in size, requiring more supervision in that area. Also, machine studies have either verified or modified knowledge of beam loss modes and/or radiation loss patterns around the facility. This document is written to allow for these changes in procedure or standards resulting from their current mode of operation and shall be used in conjunction with the above reports. These changes have been reviewed by NSLS and BNL ES and H committee and approved by BNL management

Nuclear techniques for analysis of environmental samples

International Nuclear Information System (INIS)

1986-12-01

The main purposes of this meeting were to establish the state-of-the-art in the field, to identify new research and development that is required to provide an adequate framework for analysis of environmental samples and to assess needs and possibilities for international cooperation in problem areas. This technical report was prepared on the subject based on the contributions made by the participants. A separate abstract was prepared for each of the 9 papers

Multi-criteria decision analysis in environmental sciences: ten years of applications and trends.

Science.gov (United States)

Huang, Ivy B; Keisler, Jeffrey; Linkov, Igor

2011-09-01

Decision-making in environmental projects requires consideration of trade-offs between socio-political, environmental, and economic impacts and is often complicated by various stakeholder views. Multi-criteria decision analysis (MCDA) emerged as a formal methodology to face available technical information and stakeholder values to support decisions in many fields and can be especially valuable in environmental decision making. This study reviews environmental applications of MCDA. Over 300 papers published between 2000 and 2009 reporting MCDA applications in the environmental field were identified through a series of queries in the Web of Science database. The papers were classified by their environmental application area, decision or intervention type. In addition, the papers were also classified by the MCDA methods used in the analysis (analytic hierarchy process, multi-attribute utility theory, and outranking). The results suggest that there is a significant growth in environmental applications of MCDA over the last decade across all environmental application areas. Multiple MCDA tools have been successfully used for environmental applications. Even though the use of the specific methods and tools varies in different application areas and geographic regions, our review of a few papers where several methods were used in parallel with the same problem indicates that recommended course of action does not vary significantly with the method applied. Published by Elsevier B.V.

Instrumental neutron activation analysis in environmental research

International Nuclear Information System (INIS)

Bruin, M. de.

1985-01-01

The main characteristics of instrumental neutron activation analysis (INAA),relevant for environmental research and monitoring, was reviewed and discussed-sensitivity, suitable for detection of many toxic elements, the low risks of contamination of element loss, lack of matrix effects, lack of light element interference except for 24 Na, capability for multi-element determination, comparatively low costs. A detailed description of the IRI analysis system for routine INAA is given. The system is based on the single comparator method of standartization to take full advantage of multi-element without preparation and use the trace element standards. Zinc was used as mono element standard, the element concentrations are calculated on the basis of 65 Zn and 69m Zn-activities. The irradiations were carried out in a thermal neutron flux of 1.10 13 n/cm 2 .s. The gamma spectra is converted into element concentrations using a set of dedicated software, performing the following functions: spectrum analysis and interpretation, comparison and combination of the intermediate results from different decay times, generation of the final report, bookkeeping of the results obtained. The main applications of the INAA system mentioned are: identification of sources of heavy metal air pollution using air filters or biological indicators such as mosses, lichens, toe-nails, bird feathers, molusks and waterplants; and study of the uptake and translocation of heavy element in plants. Special attention was paid to mathematical techniques for a reliable interpretation of the element concentration patterns observed in sets of lichen samples. Future developments in INAA in environmental science are briefly mentioned

Precision of neutron activation analysis for environmental biological materials

International Nuclear Information System (INIS)

Hamaguchi, Hiroshi; Iwata, Shiro; Koyama, Mutsuo; Sasajima, Kazuhisa; Numata, Yuichi.

1977-01-01

Between 1973 and 1974 a special committee ''Research on the application of neutron activation analysis to the environmental samples'' had been organized at the Research Reactor Institute, Kyoto University. Eleven research groups composed mainly of the committee members cooperated in the intercomparison programme of the reactor neutron activation analysis of NBS standard reference material, 1571 Orchard Leaves and 1577 Bovine Liver. Five different type of reactors were used for the neutron irradiation; i.e. KUR reactor of the Research Reactor Institute, Kyoto University, TRIGA MARK II reactor of the Institute for Atomic Energy, Rikkyo University, and JRR-2, JRR-3, JRR-4 reactor of Japan Atomic Energy Research Institute. Analyses were performed mainly by instrumental method. Precision of the analysis of 23 elements in Orchard Leaves and 13 elements in Bovine Liver presented by the different research groups was shown in table 4 and 5, respectively. The coefficient of variation for these elements was from several to -- 30 percent. Averages given to these elements agreed well with the NBS certified or reference values. Thus, from the practical point of view for the routine multielement analysis of environmental samples, the validity of the instrumental neutron activation technique for this purpose has been proved. (auth.)

Scenario analysis in environmental impact assessment: Improving explorations of the future

International Nuclear Information System (INIS)

Duinker, Peter N.; Greig, Lorne A.

2007-01-01

Scenarios and scenario analysis have become popular approaches in organizational planning and participatory exercises in pursuit of sustainable development. However, they are little used, at least in any formal way, in environmental impact assessment (EIA). This is puzzling because EIA is a process specifically dedicated to exploring options for more-sustainable (i.e., less environmentally damaging) futures. In this paper, we review the state of the art associated with scenarios and scenario analysis, and describe two areas where scenario analysis could be particularly helpful in EIA: (a) in defining future developments for cumulative effects assessment; and (b) in considering the influence of contextual change - e.g. climate change - on impact forecasts for specific projects. We conclude by encouraging EIA practitioners to learn about the promise of scenario-based analysis and implement scenario-based methods so that EIA can become more effective in fostering sustainable development

Response planning and environmental risk analysis, state of Alaska

International Nuclear Information System (INIS)

Gundlach, E.R.; Marben, G.M.

1993-01-01

Under the sponsorship of the Alaska Dept. of Environmental Conservation (ADEC), a multitasked study was undertaken to determine the relative risk of noncrude oil transport (including marine and freshwater), the status of spill response capability in the state, and the need and most appropriate locations for siting spill response deposits. The project used multidisciplinary transport and environmental data analyzed in a geographic information system (GIS) to enable various scenarios and data changes to be easily visualized. The evaluation concerned (a) designation of significant environmental risk areas, (b) environmentally sensitive areas and fish and wildlife likely to be affected, (c) the level of response capability appropriate for protecting the environment, (d) the adequacy of current capabilities for noncrude vessels, (e) the feasibility of establishing one or more response cooperatives for use by multiple carriers, and (f) other steps that could be taken to reduce the risk of a spill and facilitate control and cleanup

Promises and pitfalls in environmentally extended input–output analysis for China: A survey of the literature

International Nuclear Information System (INIS)

Hawkins, Jacob; Ma, Chunbo; Schilizzi, Steven; Zhang, Fan

2015-01-01

As the world's largest developing economy, China plays a key role in global climate change and other environmental impacts of international concern. Environmentally extended input–output analysis (EE-IOA) is an important and insightful tool seeing widespread use in studying large-scale environmental impacts in China: calculating and analyzing greenhouse gas emissions, carbon and water footprints, pollution, and embodied energy. This paper surveys the published articles regarding EE-IOA for China in peer-reviewed journals and provides a comprehensive and quantitative overview of the body of literature, examining the research impact, environmental issues addressed, and data utilized. The paper further includes a discussion of the shortcomings in official Chinese data and of the potential means to move beyond its inherent limitations. - Highlights: • Articles in 2012–2013 more than doubled that published between 1995 and 2011. • CO 2 and energy are the most common topics, frequently associated with trade. • Data from the National Bureau of Statistics is widely used but seen as flawed. • Climate change, water supply, and food security drive the future of the literature

Relating the environmental impact of consumption to household expenditures : An input-output analysis

NARCIS (Netherlands)

Kerkhof, Annemarie C.; Nonhebel, Sanderine; Moll, Henri C.

2009-01-01

In this paper we evaluate the relationships between household expenditures and the environmental impact categories climate change, acidification, eutrophication and smog formation, by combining household expenditures with environmentally extended input–output analysis. Expenditure elasticities are

Are Australians concerned about nanoparticles? A comparative analysis with established and emerging environmental health issues.

Science.gov (United States)

Capon, Adam; Rolfe, Margaret; Gillespie, James; Smith, Wayne

2015-02-01

Introducing new technologies into society raises considerable public concern. We determine the public concern about nanoparticles, and compare this concern to other environmental health issues such as wind farms and coal seam gas production. A repeat cross sectional survey examining views on environmental health issues, risk, chemicals and trust was undertaken in more than 1,300 Australian residents in 2000 and 2013. Logistic regression and principal component analysis was used to investigate predictors of nanoparticle concern and identify a component structure for environmental health issues that could explain a trend of future nanoparticle concern. Australians have a relatively low level of concern about the risks of nanoparticles to health when compared to their concerns about other environmental health issues. Items associated with concern included gender, a general wish to avoid chemicals and possibly trust in politicians. Concern over nanoparticles clustered with similar views on technological risks. Current public concern over the risks of nanoparticles is low. However, a reframing of the issue towards 'chemicals' is likely to have a negative effect on risk perceptions. This paper raises questions about appropriate channels for the effective communication of risk. © 2015 Public Health Association of Australia.

Environmental impact analysis (EIA) concerning lodgepole pine forestry in Sweden; Miljoekonsekvensbeskrivning (MKB) av skogsbruk med contortatall i Sverige

Energy Technology Data Exchange (ETDEWEB)

Andersson, Bengt; Rosvall, Ola [Forestry Research Inst. of Sweden, Uppsala (Sweden); Engelmark, Ola [Centrum foer ekologisk haallbarhet, Umeaa (Sweden); Sjoeberg, Kjell [Swedish Univ. of Agricultural Sciences, Umeaa (Sweden). Dept. of Animal Ecology

1999-07-01

This report presents an analysis of the ecological consequences of forestry with Canadian lodgepole pine introduced into Sweden. The report includes a compilation of present knowledge in the area, research priorities, and proposed measures for dealing with the negative environmental consequences that could arise. The point of departure of the analysis is a description of the properties of lodgepole pine, including species-specific characteristics of the tree, and changes in stand environment and silvicultural management practices that can be expected. The report describes the dispersal capacity of lodgepole pine in its new Swedish environment and the effects of host-parasite interactions. Thereafter, ecological effects on the capacity of the soil for sustainable production and on biological diversity at various scales (tree, stand, landscape) are analysed. Lodgepole pine forestry is also considered in relation to current laws and regulations as well as national and international environmental goals. At the end of the report, a strategy is proposed for handling the inevitable uncertainties associated with the introduction of exotic species 111 refs, 14 figs.

Environmental impact analysis (EIA) concerning lodgepole pine forestry in Sweden; Miljoekonsekvensbeskrivning (MKB) av skogsbruk med contortatall i Sverige

Energy Technology Data Exchange (ETDEWEB)

Andersson, Bengt; Rosvall, Ola [Forestry Research Inst. of Sweden, Uppsala (Sweden); Engelmark, Ola [Centrum foer ekologisk haallbarhet, Umeaa (Sweden); Sjoeberg, Kjell [Swedish Univ. of Agricultural Sciences, Umeaa (Sweden). Dept. of Animal Ecology

1999-08-01

This report presents an analysis of the ecological consequences of forestry with Canadian lodgepole pine introduced into Sweden. The report includes a compilation of present knowledge in the area, research priorities, and proposed measures for dealing with the negative environmental consequences that could arise. The point of departure of the analysis is a description of the properties of lodgepole pine, including species-specific characteristics of the tree, and changes in stand environment and silvicultural management practices that can be expected. The report describes the dispersal capacity of lodgepole pine in its new Swedish environment and the effects of host-parasite interactions. Thereafter, ecological effects on the capacity of the soil for sustainable production and on biological diversity at various scales (tree, stand, landscape) are analysed. Lodgepole pine forestry is also considered in relation to current laws and regulations as well as national and international environmental goals. At the end of the report, a strategy is proposed for handling the inevitable uncertainties associated with the introduction of exotic species 111 refs, 14 figs

Coherent Energy and Environmental System Analysis

DEFF Research Database (Denmark)

Hvelplund, Frede Kloster; Mathiesen, Brian Vad; Østergaard, Poul Alberg

This report presents a summary of results of the strategic research project “Coherent Energy and Environmental System Analysis” (CEESA) which was conducted in the period 2007-2011 and funded by the Danish Strategic Research Council together with the participating parties. The project...... was interdisciplinary and involved more than 20 researchers from 7 different university departments or research institutions in Denmark. Moreover, the project was supported by an international advisory panel. The results include further development and integration of existing tools and methodologies into coherent...

Environmental impacts of public transport. Why peak-period travellers cause a greater environmental burden than off-peak travellers

International Nuclear Information System (INIS)

Rietveld, P.

2002-01-01

Given the difference between peak and off-peak occupancy rates in public transport, emissions per traveller kilometre are lower in the peak than in the off-peak period, whereas the opposite pattern is observed for cars. It is argued that it is much more fruitful to analyse environmental effects in marginal terms. This calls for a careful analysis of capacity management policies of public transport suppliers that are facing increased demand during both peak and off-peak periods. A detailed analysis of capacity management by the Netherlands Railways (NS) revealed that off-peak capacity supply is mainly dictated by the demand levels during the peak period. The analysis included the effects of increased frequency and increased vehicle size on environmental impacts, while environmental economies of vehicle size were also taken into account. The main conclusion is that the marginal environmental burden during the peak hours is much higher than is usually thought, whereas it is almost zero during the off-peak period. This implies a pattern that is the precise opposite of the average environmental burden. Thus, an analysis of environmental effects of public transport based on average performance would yield misleading conclusions [nl

Environmental toxin acrolein alters levels of endogenous lipids, including TRP agonists: A potential mechanism for headache driven by TRPA1 activation

Directory of Open Access Journals (Sweden)

Emma Leishman

2017-01-01

Full Text Available Exposure to airborne toxins can trigger headaches, but the mechanisms are not well understood. Some environmental toxins, such as acrolein, activate transient receptor potential ankyrin 1 (TRPA1, a receptor involved in pain sensation that is highly expressed in the trigeminovascular system. It has been shown in rat models that repeated exposure to acrolein induces trigeminovascular sensitization to both TRPA1 and TRP vanilloid 1 (TRPV1 agonists, a phenomenon linked to headache. In this study, we test the hypothesis that the sensitization of trigeminovascular responses in rats after acrolein exposure via inhalation is associated with changes in levels of endogenous lipids, including TRPV1 agonists, in the trigeminal ganglia, trigeminal nucleus, and cerebellum. Lipidomics analysis of 80 lipids was performed on each tissue after acute acrolein, chronic acrolein, or room air control. Both acute and chronic acrolein exposure drove widespread alterations in lipid levels. After chronic acrolein exposure, levels of all 6 N-acyl ethanolamines in the screening library, including the endogenous cannabinoid and TRPV1 agonist, N-arachidonoyl ethanolamine, were elevated in trigeminal tissue and in the cerebellum. This increase in TRPV1 ligands by acrolein exposure may indicate further downstream signaling, in that we also show here that a combination of these TRPV1 endogenous agonists increases the potency of the individual ligands in TRPV1-HEK cells. In addition to these TRPV1 agonists, 3 TRPV3 antagonists, 4 TRPV4 agonists, and 25 orphan lipids were up and down regulated after acrolein exposure. These data support the hypothesis that lipid signaling may represent a mechanism by which repeated exposure to the TRPA1 agonist and environmental toxin, acrolein, drives trigeminovascular sensitization. Keywords: Lipidomics, Endogenous cannabinoid, TRPA1, TRPV1, Lipoamine, Acrolein, Migraine

Development and application of dynamic hybrid multi-region inventory analysis for macro-level environmental policy analysis: a case study on climate policy in Taiwan.

Science.gov (United States)

Chao, Chia-Wei; Heijungs, Reinout; Ma, Hwong-wen

2013-03-19

We develop a novel inventory method called Dynamic Hybrid Multi-Region Inventory analysis (DHMRI), which integrates the EEMRIOA and Integrated Hybrid LCA and applies time-dependent environmental intervention information for inventory analysis. Consequently, DHMRI is able to quantify the change in the environmental footprint caused by a specific policy while taking structural changes and technological dynamics into consideration. DHMRI is applied to assess the change in the total CO2 emissions associated with the total final demand caused by the climate policy in Taiwan to demonstrate the practicality of this novel method. The evaluation reveals that the implementation of mitigation measures included in the existing climate policy, such as an enhancement in energy efficiency, promotion of renewable energy, and limitation of the growth of energy-intensive industries, will lead to a 28% increase in the total CO2 emissions and that the main driver is the export-oriented electronics industry. Moreover, a major increase in the total emissions is predicted to occur in Southeast Asia and China. The observations from the case study reveal that DHMRI is capable of overcoming the limitations of existing assessment tools at macro-level evaluation of environmental policies.

Smartphones for distributed multimode sensing: biological and environmental sensing and analysis

Science.gov (United States)

Feitshans, Tyler; Williams, Robert

2013-05-01

Active and Agile Environmental and Biological sensing are becoming obligatory to generate prompt warnings for the troops and law enforcements conducting missions in hostile environments. The traditional static sensing mesh networks which provide a coarse-grained (far-field) measurement of the environmental conditions like air quality, radiation , CO2, etc … would not serve the dynamic and localized changes in the environment, which requires a fine-grained (near-field) sensing solutions. Further, sensing the biological conditions of (healthy and injured) personnel in a contaminated environment and providing a personalized analysis of the life-threatening conditions in real-time would greatly aid the success of the mission. In this vein, under SATE and YATE programs, the research team at AFRL Tec^Edge Discovery labs had demonstrated the feasibility of developing Smartphone applications , that employ a suite of external environmental and biological sensors, which provide fine-grained and customized sensing in real-time fashion. In its current state, these smartphone applications leverage a custom designed modular standalone embedded platform (with external sensors) that can be integrated seamlessly with Smartphones for sensing and further provides connectivity to a back-end data architecture for archiving, analysis and dissemination of real-time alerts. Additionally, the developed smartphone applications have been successfully tested in the field with varied environmental sensors to sense humidity, CO2/CO, wind, etc…, ; and with varied biological sensors to sense body temperature and pulse with apt real-time analysis

Environmental impact analysis of aquaculture in net cages in a ...

African Journals Online (AJOL)

Environmental impact analysis of aquaculture in net cages in a Brazilian water reservoir, based in zooplankton communities. Maria Cristina Crispim, Karla Patrícia Ponte Araújo, Hênio do Nascimento Melo Júnior ...

Environmental Quality and the U.S. Power Sector: Air Quality, Land Use and Environmental Justice

Energy Technology Data Exchange (ETDEWEB)

Massetti, Emanuele [Georgia Inst. of Technology, Atlanta, GA (United States); Brown, Marilyn Ann [Georgia Inst. of Technology, Atlanta, GA (United States); Lapsa, Melissa Voss [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sharma, Isha [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bradbury, James [U.S. Dept. of Energy, Washington, DC (United States); Cunliff, Colin [American Association for the Advancement of Science, Washington, DC (United States); Li, Yufei [Georgia Inst. of Technology, Atlanta, GA (United States)

2017-01-04

This baseline report summarizes key environmental quality issues associated with electricity generation, transmission, distribution, and end use in the United States. Its scope includes non-greenhouse gas air pollution (i.e., sulfur dioxide, nitrogen oxides, particulate matter and hazardous air pollutants), land use, water pollution, ecological impacts, human health, and environmental justice. The discussion characterizes both current impacts and recent trends, as well as assessments of key drivers of change. For example, the air emissions section includes a quantitative decomposition analysis of the drivers of change in sulfur dioxide emissions reductions from coal-fired power plants. The report is divided into four topical sections: air emissions, land use and ecology, water quality, and environmental justice.

43 CFR 46.310 - Contents of an environmental assessment.

Science.gov (United States)

2010-10-01

... implementation without the need for further analysis. Adaptive management includes a monitoring component... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Contents of an environmental assessment... OF THE NATIONAL ENVIRONMENTAL POLICY ACT OF 1969 Environmental Assessments § 46.310 Contents of an...

Analytical quality control in environmental analysis - Recent results and future trends of the IAEA's analytical quality control programme

Energy Technology Data Exchange (ETDEWEB)

Suschny, O; Heinonen, J

1973-12-01

The significance of analytical results depends critically on the degree of their reliability, an assessment of this reliability is indispensable if the results are to have any meaning at all. Environmental radionuclide analysis is a relatively new analytical field in which new methods are continuously being developed and into which many new laboratories have entered during the last ten to fifteen years. The scarcity of routine methods and the lack of experience of the new laboratories have made the need for the assessment of the reliability of results particularly urgent in this field. The IAEA, since 1962, has provided assistance to its member states by making available to their laboratories analytical quality control services in the form of standard samples, reference materials and the organization of analytical intercomparisons. The scope of this programme has increased over the years and now includes, in addition to environmental radionuclides, non-radioactive environmental contaminants which may be analysed by nuclear methods, materials for forensic neutron activation analysis, bioassay materials and nuclear fuel. The results obtained in recent intercomparisons demonstrate the continued need for these services. (author)

Exploring the existence of Kuznets curve in countries' environmental efficiency using DEA window analysis

Energy Technology Data Exchange (ETDEWEB)

Halkos, George Emm.; Tzeremes, Nickolaos G. [Department of Economics, University of Thessaly, Korai 43, 38333, Volos (Greece)

2009-05-15

This paper, using data envelopment (DEA) window analysis and generalized method of moments (GMM) estimators, examines the existence of a Kuznets type relationship between countries' environmental efficiency and national income. Specifically, it measures the environmental efficiency of 17 OECD countries by constructing environmental efficiency ratios for the time period 1980-2002. The analysis with the application of dynamic panel data reveals that there isn't a Kuznets type relationship between environmental efficiency and income. Allowing for dynamic effects we find that the adjustment to the target ratio is instantaneous. We also find that increased economic activity does not always ensure environmental protection and thus the path of growth is important in addition to the growth itself. (author)

Savannah River Site environmental data for 1993

Energy Technology Data Exchange (ETDEWEB)

Arnett, M.W. [ed.

1994-05-01

The figures and tables in this report represent a capsule view of the routine environmental monitoring and surveillance programs at the Savannah River Site. An attempt has been made to include all available data from environmental research programs. The first section of the book is a collection of maps of radiological and nonradiological sampling locations. Also included are general radiological and nonradiological sampling and analysis schedules; a list of the media sampled, along with sample sizes and representative aliquots; a list of the lower limits of detection for radiological detection instruments; the minimum detectable concentrations for gamma analysis of water and air samples; and the minimum detectable concentrations for gamma analysis of soil, food, fish and wildlife, and vegetation samples. Following the first section are data tables containing radiological and nonradiological effluent monitoring results, radiological and nonradiological environmental surveillance results, dose estimates, quality assurance activities, and results of nonroutine occurrences and special surveys.

75 FR 65620 - Inglis Hydropower, LLC; Notice of Application Ready for Environmental Analysis and Soliciting...

Science.gov (United States)

2010-10-26

... Hydropower, LLC; Notice of Application Ready for Environmental Analysis and Soliciting Comments...: Inglis Hydropower, LLC. e. Name of Project: Inglis Hydropower Project. f. Location: The project would be... ready for environmental analysis at this time. l. The proposed 2.0-megawatt Inglis Hydropower Project...

Current methods of handling less-than-detectable measurements and detection limits in statistical analysis of environmental data

International Nuclear Information System (INIS)

Hertzler, C.L.; Atwood, C.L.; Harris, G.A.

1989-09-01

A search was made of statistical literature that might be applicable in environmental assessment contexts, when some of the measured quantities are reported as less than detectable (LTD). Over 60 documents were reviewed, and the findings are described in this report. The methodological areas considered are parameter estimation (point estimates and confidence intervals), tolerance intervals and prediction intervals, regression, trend analysis, comparisons of populations (including two-sample comparisons and analysis of variance), and goodness of fit tests. The conclusions are summarized at the end of the report. 68 refs., 1 tab

Safety analysis of RA reactor operation, I-III, Part III - Environmental effect of the maximum credible accident

International Nuclear Information System (INIS)

Raisic, N.

1963-02-01

Maximum credible accident at the RA reactor would consider release of fission products into the environment. This would result from fuel elements failure or meltdown due to loss of coolant. The analysis presented in this report assumes that the reactor was operating at nominal power at the moment of maximum possible accident. The report includes calculations of fission products activity at the moment of accident, total activity release during the accident, concentration of radioactive material in the air in the reactor neighbourhood, and the analysis of accident environmental effects

Calculations of environmental benefits from using geothermal energy must include the rebound effect

DEFF Research Database (Denmark)

Atlason, Reynir Smari; Unnthorsson, Runar

2017-01-01

and energy production patterns are simulated using data from countries with similar environmental conditions but do not use geothermal or hydropower to the same extent as Iceland. Because of the rapid shift towards renewable energy and exclusion of external energy provision, the country is considered......When considering the environmental benefits from converting to renewable energy sources, the rebound effect is often omitted. In this study, the aim is to investigate greenhouse gas emission reduction inclusive of the rebound effect. We use Iceland as a case study where alternative consumption...

Environmental accounting in Spain: structured review process and theoretical analysis

Directory of Open Access Journals (Sweden)

Fabricia Silva da Rosa

2012-12-01

Full Text Available One way to perceive and understand the level of development of environmental accounting is to study the main features of its publications. Thus, the purpose of this paper is to identify and analyze the profile of Spanish publications in accounting journals. To this end, 15 journals were selected and analyzed 74 articles in the period 2001 to 2010. The results show that the peak years of publication are 2001, 2003 and 2006, and authors with more articles in the sample are Moneva Abadía, Larrinaga González, Fernández Cuesta and Archel Domench. In terms of methodology, the works of review, case studies and content analysis, addressing standardization issues, fundamentals of environmental accounting, environmental sustainability indicators and reporting.

Materials and Methods for Streamlined Laboratory Analysis of Environmental Samples, FY 2016 Report

Energy Technology Data Exchange (ETDEWEB)

Addleman, Raymond S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Naes, Benjamin E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McNamara, Bruce K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Olsen, Khris B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chouyyok, Wilaiwan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Willingham, David G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Spigner, Angel C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-11-30

evaluation). • Explored improvements to carbonate-peroxide rapid uranium extraction chemistry. • Evaluated new sampling materials and methods (in collaboration with ORNL). • Demonstrated successful ES extractions from standard and novel swipes for a wide range uranium compounds of interest including UO₂F₂ and UO₂(NO₃)₂, U₃O₈ and uranium ore concentrate. • Completed initial discussions with commercial suppliers of PTFE swipe materials. • Submitted one manuscript for publication. Two additional drafts are being prepared. Principal progress and accomplishments on Task 2, Optimize Materials and Methods for Direct SIMS Environmental Sample Analysis, are listed below. • Designed a SIMS swipe sample holder that retrofits into existing equipment and provides simple, effective, and rapid mounting of ES samples for direct assay while enabling automation and laboratory integration. • Identified preferred conductive sampling materials with better performance characteristics. • Ran samples on the new PNNL NWAL equivalent Cameca 1280 SIMS system. • Obtained excellent agreement between isotopic ratios for certified materials and direct SIMS assay of very low levels of LEU and HEU UO₂F₂ particles on carbon fiber sampling material. Sample activities range from 1 to 500 CPM (uranium mass on sample is dependent upon specific isotope ratio but is frequently in the subnanogram range). • Found that the presence of the UF molecular ions, as measured by SIMS, provides chemical information about the particle that is separate from the uranium isotopics and strongly suggests that those particles originated from an UF6 enrichment activity. • Submitted one manuscript for publication. Another manuscript is in preparation.

Trace element analysis of environmental samples by multiple prompt gamma-ray analysis method

International Nuclear Information System (INIS)

Oshima, Masumi; Matsuo, Motoyuki; Shozugawa, Katsumi

2011-01-01

The multiple γ-ray detection method has been proved to be a high-resolution and high-sensitivity method in application to nuclide quantification. The neutron prompt γ-ray analysis method is successfully extended by combining it with the γ-ray detection method, which is called Multiple prompt γ-ray analysis, MPGA. In this review we show the principle of this method and its characteristics. Several examples of its application to environmental samples, especially river sediments in the urban area and sea sediment samples are also described. (author)

Applied research on environmental pollution using INAA. A study on the environmental indicator analysis

Energy Technology Data Exchange (ETDEWEB)

Kim, Nak Bae; Lee, Gil Yong; Yoon, Yoon Yul; Chon, Sang Ki [Korea Institute of Geology Mining and Research, Taejon (Korea, Republic of)

1995-08-01

Among the many kinds of environmental indicator samples such as moss, lichen, pine needle, pine needle was selected as a bio-monitor and collected sample was divided two groups and one was washed with 1% hydrochloric acid to remove the elements deposited on surface. Trace elements in pine needle were analyzed by the decay time of each nuclide. Analytical accuracy was tested by analyzing NIST SRM 1575 pine needle. Results are follows: (1) Environmental indicator as a bio-monitor pine needle was selected. (2) The content difference of the trace elements between sampling period was monitored. And as content was varied with sampling time. (3) To monitor the influence of atmospheric deposition the surface of pine needle was washed with 1% hydrochloric acid. Therefore, As, Ce, La, Na, W, and Zn contents were decreased by washing. (4) Non-destructive INAA (Instrumental Neutron Activation Analysis) technique was developed for the determination of trace elements in environmental samples. (5) Analytical accuracy was tested by analyzing NIST SRM 1575 pine needle, and the accuracy was well agreed within 10% deviation. summarized. (author). 18 refs., 8 figs., 5 tabs.

How cutting-edge technologies impact the design of electrochemical (bio)sensors for environmental analysis. A review.

Science.gov (United States)

Arduini, Fabiana; Cinti, Stefano; Scognamiglio, Viviana; Moscone, Danila; Palleschi, Giuseppe

2017-03-22

Through the years, scientists have developed cutting-edge technologies to make (bio)sensors more convenient for environmental analytical purposes. Technological advancements in the fields of material science, rational design, microfluidics, and sensor printing, have radically shaped biosensor technology, which is even more evident in the continuous development of sensing systems for the monitoring of hazardous chemicals. These efforts will be crucial in solving some of the problems constraining biosensors to reach real environmental applications, such as continuous analyses in field by means of multi-analyte portable devices. This review (with 203 refs.) covers the progress between 2010 and 2015 in the field of technologies enabling biosensor applications in environmental analysis, including i) printing technology, ii) nanomaterial technology, iii) nanomotors, iv) biomimetic design, and (v) microfluidics. Next section describes futuristic cutting-edge technologies that are gaining momentum in recent years, which furnish highly innovative aspects to biosensing devices. Copyright © 2016 Elsevier B.V. All rights reserved.

Geo-hazard harmonised data a driven process to environmental analysis system

Science.gov (United States)

Cipolloni, Carlo; Iadanza, Carla; Pantaloni, Marco; Trigila, Alessandro

2015-04-01

In the last decade an increase of damage caused by natural disasters has been recorded in Italy. To support environmental safety and human protection, by reducing vulnerability of exposed elements as well as improving the resilience of the involved communities, it need to give access to harmonized and customized data that is one of several steps towards delivering adequate support to risk assessment, reduction and management. In this contest has been developed SEIS and Copernicus-GEMES as infrastructure based on web services for environmental analysis, to integrates in its own system specifications and results from INSPIRE. The two landslide risk scenarios developed in different European projects driven the harmonization process of data that represents the basic element to have interoperable web services in environmental analysis system. From two different perspective we have built a common methodology to analyse dataset and transform them into INSPIRE compliant format following the Data Specification on Geology and on Natural Risk Zone given by INSPIRE. To ensure the maximum results and re-usability of data we have also applied to the landslide and geological datasets a wider Data model standard like GeoSciML, that represents the natural extension of INSPIRE data model to provide more information. The aim of this work is to present the first results of two projects concerning the data harmonisation process, where an important role is played by the semantic harmonisation using the ontology service and/or the hierarchy vocabularies available as Link Data or Link Open Data by means of URI directly in the data spatial services. It will be presented how the harmonised web services can provide an add value in a risk scenario analysis system, showing the first results of the landslide environmental analysis developed by the eENVplus and LIFE+IMAGINE projects.

Hanford Site surface environmental surveillance

International Nuclear Information System (INIS)

Dirkes, R.L.

1998-01-01

Environmental surveillance of the Hanford Site and the surrounding region is conducted to demonstrate compliance with environmental regulations, confirm adherence to US Department of Energy (DOE) environmental protection policies, support DOE environmental management decisions, and provide information to the public. The Surface Environmental Surveillance Project (SESP) is a multimedia environmental monitoring program conducted to measure the concentrations of radionuclides and chemical contaminants in the environment and assess the integrated effects of these contaminants on the environment and the public. The monitoring program includes sampling air, surface water, sediments, soil, natural vegetation, agricultural products, fish, and wildlife. Functional elements inherent in the operation of the SESP include project management, quality assurance/control, training, records management, environmental sampling network design and implementation, sample collection, sample analysis, data management, data review and evaluation, exposure assessment, and reporting. The SESP focuses on those contaminant/media combinations calculated to have the highest potential for contributing to off-site exposure. Results of the SESP indicate that contaminant concentrations in the Hanford environs are very low, generally below environmental standards, at or below analytical detection levels, and indicative of environmental levels. However, areas of elevated contaminant concentrations have been identified at Hanford. The extent of these areas is generally limited to past operating areas and waste disposal sites

Monitoring and Analysis of Environmental Gamma Dose Rate around Serpong Nuclear Complex

Directory of Open Access Journals (Sweden)

I.P. Susila

2017-08-01

Full Text Available An environmental radiation monitoring system that continuously measures gamma dose rate around nuclear facilities is an important tool to present dose rate information to the public or authorities for radiological protection during both normal operation and radiological accidents. We have developed such a system that consists of six GM-based device for monitoring the environmental dose rate around Serpong Nuclear Complex. It has operated since 2010. In this study, a description of the system and analysis of measured data are presented. Analysis of the data for the last five years shows that the average dose rate levels were between 84-99 nSv/h which are still lower than terrestrial gamma radiation levels at several other locations in Indonesia. Time series analysis of the monitoring data demonstrates a good agreement between an increase in environmental gamma dose rate and the presence of iodine and argon in the air by in situ measurement. This result indicates that system is also effective for an early warning system in the case of radiological emergency.

A goal programming model for environmental policy analysis: Application to Spain

International Nuclear Information System (INIS)

San Cristóbal, José Ramón

2012-01-01

Sustainable development has become an important part of international and national approaches to integrate economic, environmental, social and ethical considerations so that a good quality of life can be enjoyed by current and future generations for as long as possible. However, nowadays sustainable development is threatened by industrial pollution emissions which cause serious environmental problems. Due to a lack of adequate quantitative models for environmental policy analysis, there is a strong need for analytical models in order to know the effects of environmental policies. In the present paper, a goal programming model, based on an environmental/input–output linear programming model, is developed and applied to the Spanish economy. The model combines relations between economic, energy, social and environmental effects, providing valuable information for policy-makers in order to define and examine the different goals that must be implemented to reach sustainability. - Highlights: ► In this paper a goal programming model is developed. ► The model considers environmental, energy, social and economic goals. ► The model shows the effects of a reduction in greenhouse gasses emission and energy requirements. ► The model is applied to the Spanish economy.

Partial analysis of the environmental costs generated by hotels in Hong Kong

Energy Technology Data Exchange (ETDEWEB)

Chan, W.W. [Hong Kong Polytechnic Univ., Hung Hom (China). School of Hotel and Tourism Management

2005-12-15

This paper investigates the environmental costs attributable to the various activities involved in operating a hotel such as energy usage, water consumption, and solid waste disposal. A control cost approach and a pro-rated model were used in environmental costing. A holistic analysis of the environmental costs was then made. It was found that, in the early 1990s, the environmental costs incurred in controlling air pollution was higher than for other types of pollution. However, the situation changed during the late 1990s as the government invested more in building large-scale sewage treatment systems and landfills. At present, the environmental costs attributable to water protection and solid waste management have been larger than the environmental costs of air pollution. This implies that hotel operators should place a greater focus on mitigating the pressure on the environment from the consumption of water and disposal of solid waste. Also based on the methodologies, recommendations on environmental accounting on three levels are made. (Author)

Environmental/Economic Analysis and Recycling of Wastes from Air ...

African Journals Online (AJOL)

Environmental and economic analysis was performed on the wastes from Air Liquid Nigeria Ltd. The company's waste water, spent oil, noise and air pollutants were examined. Results show no serious adverse impact on the ambient air quality. There was serious noise pollution problem around the factory hall and generator ...

Radiation and environmental data analysis computer (REDAC) hardware, software band analysis procedures

International Nuclear Information System (INIS)

Hendricks, T.J.

1985-01-01

The REDAC was conceived originally as a tape verifier for the Radiation and Environmental Data Acquisition Recorder (REDAR). From that simple beginning in 1971, the REDAC has evolved into a family of systems used for complete analysis of data obtained by the REDAR and other acquisition systems. Portable or mobile REDACs are deployed to support checkout and analysis tasks in the field. Laboratory systems are additionally used for software development, physics investigations, data base management and graphics. System configurations range from man-portable systems to a large laboratory-based system which supports time-shared analysis and development tasks. Custom operating software allows the analyst to process data either interactively or by batch procedures. Analysis packages are provided for numerous necessary functions. All these analysis procedures can be performed even on the smallest man-portable REDAC. Examples of the multi-isotope stripping and radiation isopleth mapping are presented. Techniques utilized for these operations are also presented

Current trends in green liquid chromatography for the analysis of pharmaceutically active compounds in the environmental water compartments.

Science.gov (United States)

Shaaban, Heba; Górecki, Tadeusz

2015-01-01

Green analytical chemistry is an aspect of green chemistry which introduced in the late nineties. The main objectives of green analytical chemistry are to obtain new analytical technologies or to modify an old method to incorporate procedures that use less hazardous chemicals. There are several approaches to achieve this goal such as using environmentally benign solvents and reagents, reducing the chromatographic separation times and miniaturization of analytical devices. Traditional methods used for the analysis of pharmaceutically active compounds require large volumes of organic solvents and generate large amounts of waste. Most of them are volatile and harmful to the environment. With the awareness about the environment, the development of green technologies has been receiving increasing attention aiming at eliminating or reducing the amount of organic solvents consumed everyday worldwide without loss in chromatographic performance. This review provides the state of the art of green analytical methodologies for environmental analysis of pharmaceutically active compounds in the aquatic environment with special emphasis on strategies for greening liquid chromatography (LC). The current trends of fast LC applied to environmental analysis, including elevated mobile phase temperature, as well as different column technologies such as monolithic columns, fully porous sub-2 μm and superficially porous particles are presented. In addition, green aspects of gas chromatography (GC) and supercritical fluid chromatography (SFC) will be discussed. We pay special attention to new green approaches such as automation, miniaturization, direct analysis and the possibility of locating the chromatograph on-line or at-line as a step forward in reducing the environmental impact of chromatographic analyses. Copyright © 2014 Elsevier B.V. All rights reserved.

Environmental behavior and analysis of agricultural sulfur.

Science.gov (United States)

Griffith, Corey M; Woodrow, James E; Seiber, James N

2015-11-01

Sulfur has been widely used for centuries as a staple for pest and disease management in agriculture. Presently, it is the largest-volume pesticide in use worldwide. This review describes the sources and recovery methods for sulfur, its allotropic forms and properties and its agricultural uses, including development and potential advantages of nanosulfur as a fungicide. Chemical and microbial reactivity, interactions in soil and water and analytical methods for determination in environmental samples and foodstuffs, including inexpensive analytical methods for sulfur residues in wine, beer and other food/beverage substrates, will be reviewed. The toxicology of sulfur towards humans and agriculturally important fungi is included, with some restrictions on use to promote safety. The review concludes with areas for which more research is warranted. © 2015 Society of Chemical Industry.

Environmental data qualification system

International Nuclear Information System (INIS)

Hester, O.V.; Groh, M.R.

1989-01-01

The Integrated Environmental Data Management System (IEDMS) is a PC-based system that can support environmental investigations from their design stage and throughout the duration of the study. The system integrates data originating from the Sampling and Analysis Plan, field data and analytical findings. The IEDMS automated features include sampling guidance forms, barcoded sample labels and tags, field and analytical forms reproduction, sample tracking, analytical data qualification, completeness reports, and results and QC data reporting. The IEDMS has extensive automated capabilities that support a systematic and comprehensive process for performing quality assessment of EPA-CLP chemical analyses data. One product of this process is a unique and extremely useful tabular presentation of the data. One table contains the complete set of results and QC data included on the CLP data forms while presenting the information consistent with the chronology in which the analysis was performed. 3 refs., 1 fig

Comparative Genomic Analysis of Clinical and Environmental Vibrio Vulnificus Isolates Revealed Biotype 3 Evolutionary Relationships

Directory of Open Access Journals (Sweden)

Yael eKotton

2015-01-01

Full Text Available In 1996 a common-source outbreak of severe soft tissue and bloodstream infections erupted among Israeli fish farmers and fish consumers due to changes in fish marketing policies. The causative pathogen was a new strain of Vibrio vulnificus, named biotype 3, which displayed a unique biochemical and genotypic profile. Initial observations suggested that the pathogen erupted as a result of genetic recombination between two distinct populations. We applied a whole genome shotgun sequencing approach using several V. vulnificus strains from Israel in order to study the pan genome of V. vulnificus and determine the phylogenetic relationship of biotype 3 with existing populations. The core genome of V. vulnificus based on 16 draft and complete genomes consisted of 3068 genes, representing between 59% and 78% of the whole genome of 16 strains. The accessory genome varied in size from 781 kbp to 2044 kbp. Phylogenetic analysis based on whole, core, and accessory genomes displayed similar clustering patterns with two main clusters, clinical (C and environmental (E, all biotype 3 strains formed a distinct group within the E cluster. Annotation of accessory genomic regions found in biotype 3 strains and absent from the core genome yielded 1732 genes, of which the vast majority encoded hypothetical proteins, phage-related proteins, and mobile element proteins. A total of 1916 proteins (including 713 hypothetical proteins were present in all human pathogenic strains (both biotype 3 and non-biotype 3 and absent from the environmental strains. Clustering analysis of the non-hypothetical proteins revealed 148 protein clusters shared by all human pathogenic strains; these included transcriptional regulators, arylsulfatases, methyl-accepting chemotaxis proteins, acetyltransferases, GGDEF family proteins, transposases, type IV secretory system (T4SS proteins, and integrases. Our study showed that V. vulnificus biotype 3 evolved from environmental populations and

Cost-consequence analysis of multimodal interventions with environmental components for pediatric asthma in the state of Maryland.

Science.gov (United States)

Jassal, Mandeep S; Diette, Gregory B; Dowdy, David W

2013-08-01

Applied environmental strategies for asthma control are often expensive, but may save longer-term healthcare costs. Whether these savings outweigh additional costs of implementing these strategies is uncertain. We conducted a systematic review to estimate the expenditures and savings of environmental interventions for asthma in the state of Maryland. Direct costs included hospitalizations, emergency room, and clinic visits. Indirect expenditures included costs of lost work productivity and travel incurred during the usage of healthcare services. We used decision analysis, assuming a hypothetical cohort of the approximated 49,290 pediatric individuals in Maryland with persistent asthma, to compare costs and benefits of environmental asthma interventions against the standard of care (no intervention) from the societal perspective. Three interventions among nine articles met the inclusion criteria for the systematic review: 1) environmental education using medical professionals; 2) education using non-medical personnel; and 3) multi-component strategy involving education with non-medical personnel, allergen-impermeable covers, and pest management. All interventions were found to be cost-saving relative to the standard of care. Home environmental education using non-medical professionals yielded the highest net savings of $14.1 million (95% simulation interval (SI): $-.283 million, $19.4 million), while the multi-component intervention resulted in the lowest net savings of $8.1 million (95% SI: $-4.9 million, $15.9 million). All strategies were most sensitive to the baseline number of hospitalizations in those not receiving targeted interventions for asthma. Limited environmental reduction strategies for asthma are likely to be cost-saving to the healthcare system in Maryland and should be considered for broader scale-up in other economically similar settings.

Environmental technology strongholds. A business analysis of cluster creation; Miljoeteknologiske styrkepositioner. En erhvervsanalyse af klyngedannelse

Energy Technology Data Exchange (ETDEWEB)

Rosted, J.; Andersen, Torsten; Degn Bertelsen, M. [FORA (Denmark)

2006-08-31

Global focus on environmental responsibility has increased interest in new environmental technology solutions, and environmental technologies will see impressive global growth rates in the coming decades. Environmental technologies make important contributions to solving global environmental challenges. But they are only part of the solution. The development of ground-braking environmental technology solutions should go hand in hand with political decisions on binding environmental goals, public environmental regulation and economic incentives that promote an appropriate behaviour among companies and consumers. The environmental technology market is a highly competitive market that focuses on utilising new and emerging technologies. A large number of Danish companies are active participants in the global competition. There are several examples of government institutions taking an active part in the competition. More and more, new environmental technologies are developed in a binding and strategic collaboration involving companies, universities, research laboratories and government authorities. The level of Danish government authority participation is a critical element. However, this is not the focus of this analysis. The purpose of the analysis is to identify environmental technology areas where Denmark potentially could create new strongholds, if strategic and binding collaboration involving companies, knowledge institutions and government authorities is carried out. The actual level of co-operation should be decided among the relevant stake holders. (au)

Sustainability evaluation of Sicily's lemon and orange production: an energy, economic and environmental analysis.

Science.gov (United States)

Pergola, M; D'Amico, M; Celano, G; Palese, A M; Scuderi, A; Di Vita, G; Pappalardo, G; Inglese, P

2013-10-15

The island of Sicily has a long standing tradition in citrus growing. We evaluated the sustainability of orange and lemon orchards, under organic and conventional farming, using an energy, environmental and economic analysis of the whole production cycle by using a life cycle assessment approach. These orchard systems differ only in terms of a few of the inputs used and the duration of the various agricultural operations. The quantity of energy consumption in the production cycle was calculated by multiplying the quantity of inputs used by the energy conversion factors drawn from the literature. The production costs were calculated considering all internal costs, including equipment, materials, wages, and costs of working capital. The performance of the two systems (organic and conventional), was compared over a period of fifty years. The results, based on unit surface area (ha) production, prove the stronger sustainability of the organic over the conventional system, both in terms of energy consumption and environmental impact, especially for lemons. The sustainability of organic systems is mainly due to the use of environmentally friendly crop inputs (fertilizers, not use of synthetic products, etc.). In terms of production costs, the conventional management systems were more expensive, and both systems were heavily influenced by wages. In terms of kg of final product, the organic production system showed better environmental and energy performances. Copyright © 2013 Elsevier Ltd. All rights reserved.

Applied Science Division annual report, Environmental Research Program FY 1983

International Nuclear Information System (INIS)

Cairns, E.J.; Novakov, T.

1984-05-01

The primary concern of the Environmental Research Program is the understanding of pollutant formation, transport, and transformation and the impacts of pollutants on the environment. These impacts include global, regional, and local effects on the atmosphere and hydrosphere, and on certain aspects of human health. This multidisciplinary research program includes fundamental and applied research in physics, chemistry, engineering, and biology, as well as research on the development of advanced methods of measurement and analysis. During FY 1983, research concentrated on atmospheric physics and chemistry, applied physics and laser spectroscopy, combustion theory and phenomena, environmental effects of oil shale processing, freshwater ecology and acid precipitation, trace element analysis for the investigation of present and historical environmental impacts, and a continuing survey of instrumentation for environmental monitoring

Assessing the influence of Environmental Impact Assessments on science and policy: an analysis of the Three Gorges Project.

Science.gov (United States)

Tullos, Desiree

2009-07-01

The need to understand and minimize negative environmental outcomes associated with large dams has both contributed to and benefited from the introduction and subsequent improvements in the Environmental Impact Assessment (EIA) process. However, several limitations in the EIA process remain, including those associated with the uncertainty and significance of impact projections. These limitations are directly related to the feedback between science and policy, with information gaps in scientific understanding discovered through the EIA process contributing valuable recommendations on critical focus areas for prioritizing and funding research within the fields of ecological conservation and river engineering. This paper presents an analysis of the EIA process for the Three Gorges Project (TGP) in China as a case study for evaluating this feedback between the EIA and science and policy. For one of the best-studied public development projects in the world, this paper presents an investigation into whether patterns exist between the scientific interest (via number of publications) in environmental impacts and (a) the identification of impacts as uncertain or priority by the EIA, (b) decisions or political events associated with the dam, and (c) impact type. This analysis includes the compilation of literature on TGP, characterization of ecosystem interactions and responses to TGP through a hierarchy of impacts, coding of EIA impacts as "uncertain" impacts that require additional study and "priority" impacts that have particularly high significance, mapping of an event chronology to relate policies, institutional changes, and decisions about TGP as "events" that could influence the focus and intensity of scientific investigation, and analysis of the number of publications by impact type and order within the impact hierarchy. From these analyses, it appears that the availability and consistency of scientific information limit the accuracy of environmental impact

Risk assessment and optimization (ALARA) analysis for the environmental remediation of Brookhaven National Laboratory's hazardous waste management facility

International Nuclear Information System (INIS)

Dionne, B.J.; Morris, S. III; Baum, J.W.

1998-03-01

The Department of Energy's (DOE) Office of Environment, Safety, and Health (EH) sought examples of risk-based approaches to environmental restoration to include in their guidance for DOE nuclear facilities. Extensive measurements of radiological contamination in soil and ground water have been made at Brookhaven National Laboratory's Hazardous Waste Management Facility (HWMF) as part of a Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) remediation process. This provided an ideal opportunity for a case study. This report provides a risk assessment and an open-quotes As Low as Reasonably Achievableclose quotes (ALARA) analysis for use at other DOE nuclear facilities as an example of a risk-based decision technique

Draft Waste Management Programmatic Environmental Impact Statement for managing treatment, storage, and disposal of radioactive and hazardous waste. Volume 3, Appendix A: Public response to revised NOI, Appendix B: Environmental restoration, Appendix C, Environmental impact analysis methods, Appendix D, Risk

International Nuclear Information System (INIS)

1995-08-01

Volume three contains appendices for the following: Public comments do DOE's proposed revisions to the scope of the waste management programmatic environmental impact statement; Environmental restoration sensitivity analysis; Environmental impacts analysis methods; and Waste management facility human health risk estimates

Draft Waste Management Programmatic Environmental Impact Statement for managing treatment, storage, and disposal of radioactive and hazardous waste. Volume 3, Appendix A: Public response to revised NOI, Appendix B: Environmental restoration, Appendix C, Environmental impact analysis methods, Appendix D, Risk

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

Volume three contains appendices for the following: Public comments do DOE`s proposed revisions to the scope of the waste management programmatic environmental impact statement; Environmental restoration sensitivity analysis; Environmental impacts analysis methods; and Waste management facility human health risk estimates.

Socio-environmental health analysis in Nogales, Sonora, Mexico

Science.gov (United States)

Norman, Laura M.; Caldeira, Felipe; Callegary, James; Gray, Floyd; O’ Rourke, Mary Kay; Meranza, Veronica; Van Rijn, Saskia

2012-01-01

In Nogales, Sonora, Mexico, some neighborhoods, or colonias, have intermittent delivery of water through pipes from the city of Nogales’s municipal water-delivery system while other areas lack piped water and rely on water delivered by truck or pipas. This research examined how lifestyles, water quality, and potential disease response, such as diarrhea, differs seasonally from a colonia with access to piped water as opposed to one using alternative water-delivery systems. Water samples were collected from taps or spigots at homes in two Nogales colonias. One colonia reflected high socio-environmental conditions where residents are supplied with municipal piped water (Colonia Lomas de Fatima); the second colonia reflected low socio-environmental conditions, lacking access to piped water and served by pipas (Colonia Luis Donaldo Colosio). A survey was developed and implemented to characterize perceptions of water quality, health impacts, and quality of life. Water samples were analyzed for microbial and inorganic water-quality parameters known to impact human health including, Escherichia coli (E. coli), total coliform bacteria, arsenic, and lead. A total of 21 households agreed to participate in the study (14 in Colosio and 7 in Fatima). In both colonias metal concentrations from water samples were all well below the United States Environmental Protection Agency’s (US EPA’s) maximum contaminant levels. E. coli concentrations exceeded the US EPA’s drinking-water standard in Colosio but not Fatima. Total coliform bacteria were present in over 50 % of households in both colonias. Microbial contamination was significantly higher in the summer than in the winter in both colonias. Resulting analysis suggests that residents in colonias without piped water are at a greater risk of gastrointestinal illness from consumption of compromised drinking water. Our survey corroborated reports of gastrointestinal illness in the summer months but not in the winter. Chloride

Causes analysis on the failure of government environmental responsibility—Based on the perspective of law and economics

Science.gov (United States)

Fa, L. N.

2017-11-01

As the important Environmental Interests of Subjects, government behooves to undertake the corresponding responsibility of Pollution Control and Environmental Protection. The current situations in our country, however, appear as government environmental responsibility failure. Based on the analysis of law and economics, this article reaches the conclusion through game analysis, principle-agency relationship and utility theory that the prisoners dilemma of environmental interest game between government and enterprise, and the inherent defect of the principal-agency relationship between central government and local government are the inherent causes of government environmental responsibility failure. Many officials tends to graft and corrupt to maximum their own benefit, thus leading to the government failure among environmental pollution treatment and the environmental responsibility to undertake.

Materials, processes, and environmental engineering network

Science.gov (United States)

White, Margo M.

1993-01-01

The Materials, Processes, and Environmental Engineering Network (MPEEN) was developed as a central holding facility for materials testing information generated by the Materials and Processes Laboratory. It contains information from other NASA centers and outside agencies, and also includes the NASA Environmental Information System (NEIS) and Failure Analysis Information System (FAIS) data. Environmental replacement materials information is a newly developed focus of MPEEN. This database is the NASA Environmental Information System, NEIS, which is accessible through MPEEN. Environmental concerns are addressed regarding materials identified by the NASA Operational Environment Team, NOET, to be hazardous to the environment. An environmental replacement technology database is contained within NEIS. Environmental concerns about materials are identified by NOET, and control or replacement strategies are formed. This database also contains the usage and performance characteristics of these hazardous materials. In addition to addressing environmental concerns, MPEEN contains one of the largest materials databases in the world. Over 600 users access this network on a daily basis. There is information available on failure analysis, metals and nonmetals testing, materials properties, standard and commercial parts, foreign alloy cross-reference, Long Duration Exposure Facility (LDEF) data, and Materials and Processes Selection List data.

Development of Unified Code for Environmental Research by Neutron Activation Analysis

Energy Technology Data Exchange (ETDEWEB)

Cho, Seung Yeon; Kim, Young Sik; Lee, Sang Mi; Chung, Sang Uk; Lee, Kyu Sung; Kang, Sang Hun; Cheon, Ki Hong [Yonsei University, Seoul (Korea, Republic of)

1997-07-01

Three codes were developed to improve accuracy and precision of neutron activation analysis with the adoption of IAEA`s recommended `GANAAS` program which has the better peak identification and efficiency calibration algorithm than the currently using commercial program. Quantitative analytical ability of trace element was improved with the codes such that the number of detectable elements including environmentally important elements was increased. Small and over lapped peaks can be detected more efficiently with the good peak shape calibration(energy dependence on peak height, peak base width and FWHM). Several efficiency functions were added to determine the detector efficiency more accurately which was the main source of error in neutron activation analysis. Errors caused by nuclear data themselves were reduced with the introduction of ko method. New graphical program called `POWER NAA` was developed for the recent personal computer environment, Window 95, and for the data compatibility. It also reduced the error caused by operator`s mistake with the easy and comfortable operation of the code. 11 refs., 3 tabs., 9 figs. (author)

Neutron activation analysis as analytical tool of environmental issue

International Nuclear Information System (INIS)

Otoshi, Tsunehiko

2004-01-01

Neutron activation analysis (NAA) ia applicable to the sample of wide range of research fields, such as material science, biology, geochemistry and so on. However, respecting the advantages of NAA, a sample with small amounts or a precious sample is the most suitable samples for NAA, because NAA is capable of trace analysis and non-destructive determination. In this paper, among these fields, NAA of atmospheric particulate matter (PM) sample is discussed emphasizing on the use of obtained data as an analytical tool of environmental issue. Concentration of PM in air is usually very low, and it is not easy to get vast amount of sample even using a high volume air sampling devise. Therefore, high sensitive NAA is suitable to determine elements in PM samples. Main components of PM is crust oriented silicate, and so on in rural/remote area, and carbonic materials and heavy metals are concentrated in PM in urban area, because of automobile exhaust and other anthropogenic emission source. Elemental pattern of PM reflects a condition of air around the monitoring site. Trends of air pollution can be traced by periodical monitoring of PM by NAA method. Elemental concentrations in air change by season. For example, crustal elements increase in dry season, and sea salts components increase their concentration when wind direction from sea is dominant. Elements that emitted from anthropogenic sources are mainly contained in fine portion of PM, and increase their concentration during winter season, when emission from heating system is high and air is stable. For further analysis and understanding of environmental issues, indicator elements for various emission sources, and elemental concentration ratios of some environmental samples and source portion assignment techniques are useful. (author)

Gamma spectrum analysis including NAA with SAMPO for Windows

International Nuclear Information System (INIS)

Aarnio, P.A.; Nikkinen, M.T.; Routti, J.T.

1995-01-01

SAMPO for Windows is a high performance gamma spectrum analysis program. All the measurement, analysis and NAA phases can be done either under full interactive use control or user defined tasks can be used for automated measurement and analysis sequences including control of MCAs and sample changers. High resolution gamma-ray spectroscopy together with the possibility to resolve complex multiplets with high accuracy makes SAMPO very suitable for INAA. On the other hand, the possibility to automate analysis sequences allows it use effectively also in all routine NAA measurements. NAA in SAMPO is accomplished using comparative methods. Spectra of standards, flux monitors, controls and actual samples are analyzed normally to obtain the peak areas which are optionally corrected for decay. In the comparison the flux monitor results are used to correct for variations in the effective neutron flux. An optional irradiation position correction can also be applied. The controls are used to alarm for possible deviations in the results. The sophisticated spectrum analysis methods used together with the comparative NAA and monitors give accurate results limited by the systematic effects only. The Windows environment provides ease of use and further processing power is available through the interface to expert system identification of nuclides. (author) 19 refs.; 1 tab

An Analysis of the Problems of Developing Environmental Education in Brazilian Federal Protected Areas.

Science.gov (United States)

De Carvalho, Cristina A. R.; Filho, Walter Leal; Hale, William H. G.

1998-01-01

Describes the problems encountered in developing environmental education in federally protected areas in Brazil. Suggests that the development of environmental education in those protected areas has several limitations including financial resources, lack of training, material resources, and lack of policy on environmental education. (Author/CCM)

What are the determinants of investment in environmental R&D?

International Nuclear Information System (INIS)

Costa-Campi, M.T.; García-Quevedo, J.; Martínez-Ros, E.

2017-01-01

To face the challenges posed by climate change, environmental R&D and innovation are critical factors if we hope to cut emissions; yet, investment in environmental R&D remains below the social optimum. The aim of this paper is to analyse the determinants of investment in environmental innovation and to detect the differences, if any, with the determinants of investment in general innovation. In addition, this paper examines the relationship between environmental innovation R&D expenditure and a range of policy instruments, including environmental regulation and other policy measures including R&D subsidies and environmental taxes. The empirical analysis is carried out for 22 manufacturing sectors in Spain for the period 2008–2013. To overcome problems of data availability, we construct a comprehensive database from different surveys. The main implications from our results are (1). Managerial strategy appears as a relevant driver of environmental R&D investments. (2) The establishment of a policy mix between environmental, energy and technological regulatory measures is recommended. (3) The promotion of self-regulation through actions that encourage companies to follow a policy that affects their energy efficiency and is environmentally friendly. - Highlights: • Analysis of the environmental innovation investment. • Link between environmental innovation and policy instruments. • Use of a policy mix instruments enhances environmental innovation.

Design and development of computerized local and overall country's environmental data analysis network system

International Nuclear Information System (INIS)

Kim, Chang Gyu; Kang, Jong Gyu; Han, H.; Han, J. S.; Lee, Y. D.; Lee, S. R.; Kang, D. J.; Cho, Y. G.; Yun, S. H.

2001-03-01

In this development, we designed a integrated database for efficient data processing of radiation-environment data and developed the CLEAN (Computerized Local and overall country's Environmental data Analysis Network) system. The CLEAN system consists of local radiation-environment network, data analysis system, data open system. We developed the CLEAN system focused on building an integrated database, a data mart, and a CLEAN web site. It is expected that the developed system, which organizes the information related to environmental radiation data systematically, can be utilize for the accurate interpretation, analysis and evaluation

Nuclear spectrometry for environmental analysis and mapping

Energy Technology Data Exchange (ETDEWEB)

Simon, Aliz, E-mail: Aliz.Simon@iaea.org [International Atomic Energy Agency (IAEA), Division of Physical and Chemical Sciences, Vienna (Austria)

2013-07-01

visits, and provision of equipment. This talk gives an overview of the lAEA Physics Section activities with a special emphasis on the following activities: 1)Improving the analytical performance of PIXE and other IBA techniques; 2)Networking for environmental analysis; 3)Radioisotope environmental mapping; 4)Future perspectives for new IBA methods, especially Heavy lon PIXE combined with MeVSIMS. (author)

Nuclear spectrometry for environmental analysis and mapping

International Nuclear Information System (INIS)

Simon, Aliz

2013-01-01

visits, and provision of equipment. This talk gives an overview of the lAEA Physics Section activities with a special emphasis on the following activities: 1)Improving the analytical performance of PIXE and other IBA techniques; 2)Networking for environmental analysis; 3)Radioisotope environmental mapping; 4)Future perspectives for new IBA methods, especially Heavy lon PIXE combined with MeVSIMS. (author)

Causes analysis on the serious defect of enterprise environmental responsibility—Based on the perspective of law and economics

Science.gov (United States)

Fa, L. N.

2017-11-01

As the important Environmental Interests of Subjects, enterprises behoove to undertake the corresponding responsibility of Pollution Control and Environmental Protection. The current situations in our country, however, appear as the serious lack of enterprise environmental responsibility. Based on the analysis of law and economics, this article reaches the conclusion through game analysis and cost-benefit analysis that the prisoners dilemma of environmental interest game between enterprises is the inherent causes for the serious defect of enterprise environmental responsibility. Meanwhile, at the point of cost-benefit, the externality of environment illegal act results in the imbalanced cost-benefit, lacking of the motivation to control pollution and protect environment in an active way.

Trading away damage. Quantifying environmental leakage through consumption-based, life-cycle analysis

International Nuclear Information System (INIS)

Ghertner, D. Asher; Fripp, Matthias

2007-01-01

This research quantifies the extent to which the US has shifted the environmental impact associated with the goods it consumes to other countries through trade. To achieve this, we use a life-cycle, consumption-based approach to measure the environmental impacts embodied in US trade activities for global warming potential (GWP), energy, toxics, and the criteria air pollutants. We use these values to determine the amount of environmental impact 'leaked' from current, production-based approaches to analyzing national environmental trends for the years 1998-2004. We find that in 2004, with reasonable assumptions about the environmental intensity of imports and exports, this leakage exceeds 10% for all studied impacts, exceeds 20% for GWP, energy, and most criteria air pollutants, and exceeds 80% for lead emissions and toxics. By including the environmental impacts embodied in trade activities into national environmental accounts, we provide consumption-based, US per capita, environmental impacts, which we use to evaluate the relationship between income and environmental impact. We find evidence for rising per capita environmental impacts over time in the US, contra the Environmental Kuznets Curve. The paper concludes with a discussion of the implications for international environmental policy of increasing embodied emissions in trade. (author)

Trading away damage. Quantifying environmental leakage through consumption-based, life-cycle analysis

Energy Technology Data Exchange (ETDEWEB)

Ghertner, D. Asher; Fripp, Matthias [Energy and Resources Group University of California, Berkeley 310 Barrows Hall 3050 Berkeley, CA 94720-3050 (United States)

2007-08-01

This research quantifies the extent to which the US has shifted the environmental impact associated with the goods it consumes to other countries through trade. To achieve this, we use a life-cycle, consumption-based approach to measure the environmental impacts embodied in US trade activities for global warming potential (GWP), energy, toxics, and the criteria air pollutants. We use these values to determine the amount of environmental impact 'leaked' from current, production-based approaches to analyzing national environmental trends for the years 1998-2004. We find that in 2004, with reasonable assumptions about the environmental intensity of imports and exports, this leakage exceeds 10% for all studied impacts, exceeds 20% for GWP, energy, and most criteria air pollutants, and exceeds 80% for lead emissions and toxics. By including the environmental impacts embodied in trade activities into national environmental accounts, we provide consumption-based, US per capita, environmental impacts, which we use to evaluate the relationship between income and environmental impact. We find evidence for rising per capita environmental impacts over time in the US, contra the Environmental Kuznets Curve. The paper concludes with a discussion of the implications for international environmental policy of increasing embodied emissions in trade. (author)

Differentiation of Xylella fastidiosa strains via multilocus sequence analysis of environmentally mediated genes (MLSA-E).

Science.gov (United States)

Parker, Jennifer K; Havird, Justin C; De La Fuente, Leonardo

2012-03-01

Isolates of the plant pathogen Xylella fastidiosa are genetically very similar, but studies on their biological traits have indicated differences in virulence and infection symptomatology. Taxonomic analyses have identified several subspecies, and phylogenetic analyses of housekeeping genes have shown broad host-based genetic differences; however, results are still inconclusive for genetic differentiation of isolates within subspecies. This study employs multilocus sequence analysis of environmentally mediated genes (MLSA-E; genes influenced by environmental factors) to investigate X. fastidiosa relationships and differentiate isolates with low genetic variability. Potential environmentally mediated genes, including host colonization and survival genes related to infection establishment, were identified a priori. The ratio of the rate of nonsynonymous substitutions to the rate of synonymous substitutions (dN/dS) was calculated to select genes that may be under increased positive selection compared to previously studied housekeeping genes. Nine genes were sequenced from 54 X. fastidiosa isolates infecting different host plants across the United States. Results of maximum likelihood (ML) and Bayesian phylogenetic (BP) analyses are in agreement with known X. fastidiosa subspecies clades but show novel within-subspecies differentiation, including geographic differentiation, and provide additional information regarding host-based isolate variation and specificity. dN/dS ratios of environmentally mediated genes, though gene dN/dS ratios and correlate with increased sequence variability. MLSA-E can more precisely resolve relationships between closely related bacterial strains with low genetic variability, such as X. fastidiosa isolates. Discovering the genetic relationships between X. fastidiosa isolates will provide new insights into the epidemiology of populations of X. fastidiosa, allowing improved disease management in economically important crops.

Environmental systems analysis of biogas systems; Miljoeanalys av biogassystem

Energy Technology Data Exchange (ETDEWEB)

Boerjesson, Paal; Berglund, Maria

2003-05-01

The purpose of this study is to analyse various biogas systems from an environmental point of view. The analyses are based on a systems analysis approach and an energy perspective. Biogas systems included are based on various combinations of substrates and final use of the biogas (heat, power and transportation fuel). The overall aims are to calculate fuel cycle emissions, quantify indirect environmental effects when various reference systems are replaced (e.g. current systems for waste treatment, agricultural production and energy generation), and to present data, calculations and results in a clear and transparent way, making the study useful for other environmental systems analyses. A general conclusion is that the environmental impact from biogas systems can vary significantly due to such factors as which substrate, energy service and reference system are chosen, and if indirect environmental effects and the need of systems enlargement are considered. The introduction of biogas systems normally leads to a reduced contribution of greenhouse gases, with some exceptions such as when biogas is used for heat and the alternative is combustion of the biomass. Biogas from manure seems to result in particularly large reductions due to indirect benefits in the form of reduced leakage of methane compared with conventional methods for handling and storing manure. A prerequisite is, however, that the losses of methane are small or that methane is combusted and thus converted into carbon dioxide. This study shows that the losses of methane can be up to 8-26%, due to what kind of biogas system is studied, before the contribution of greenhouse gases exceeds the contribution from reference systems based on fossil fuels. The contribution of emissions that leads to eutrophication and acidification is almost always reduced when biogas systems are introduced. The indirect environmental benefits could be significant for biogas based on sugar beet tops when leaving the beet tops at

Environmental protection standards - from the point of view of systems analysis

Energy Technology Data Exchange (ETDEWEB)

Becker, K

1978-11-01

A project of the International Institute of Applied Systems Analysis (IIASA) in Laxenburg castle near Vienna is reviewed where standards for environmental protection are interpreted from the point of view of systems analysis. Some examples are given to show how results are influenced not only by technical and economic factors but also by psychological and political factors.

Environmental protection standards - from the point of view of systems analysis

International Nuclear Information System (INIS)

Becker, K.

1978-01-01

A project of the International Institute of Applied Systems Analysis (IIASA) in Laxenburg castle near Vienna is reviewed where standards for environmental protection are interpreted from the point of view of systems analysis. Some examples are given to show how results are influenced not only by technical and economic factors but also by psychological and political factors. (orig.) [de

Application of X-ray fluorescence analysis in environmental research

International Nuclear Information System (INIS)

Kliment, V.; Kliman, J.; Turzo, I.

1978-01-01

A description is presented of the X-ray fluorescence analysis principles and of its possibilities in the study of environmental pollution impact. Experiments with X-ray fluorescence analysis using 241-Am and a Ge(Li) semiconductor detector are discussed. The reproducibility of determinations in dependence on the sample preparation and the evaluation of peak surfaces of characteristic radiation is shown. The dependence of the peak surface on the elemental contents in the sample was linear. Detection limits of the investigated elements ranged in tenths of μg for 300 s measurement. (author)

Analysis of environmental impact assessment (EIA) system in Turkey.

Science.gov (United States)

Coşkun, Aynur Aydın; Turker, Ozhan

2011-04-01

The Environmental Impact Assessment (EIA) System, which embodies the "prevention principle" of the environmental law, is an important tool for environmental protection. This tool has a private importance for Turkey since it is a developing country, and it entered the Turkish law in 1983 with the Environmental Law. Besides, the EIA Regulation, which shows the application principles, became effective in 1993. Because Turkey is a candidate for European Union (EU), the EIA Regulation has been changed due to the EU compliance procedure, and its latest version became valid in 2008. This study aims to emphasize The EIA system in Turkey to supervise the efficiency of this procedure and point the success level. In the introduction part, general EIA concept, its importance, and some notations are mentioned. Following that, the legislation, which builds the EIA system, has been analyzed starting from the 1982 Turkish Constitution. Then, the legislation rules are explained due to the basic steps of the EIA procedure. In order to shed light upon the application, the EIA final decisions given until today, the results, and their distributions to the industries are assessed. In the final part of the study, a SWOT analysis is made to mention the weaknesses, strengths, opportunities, and threats of the EIA system in Turkey.

Analysis of Environmental Accounting and Reporting Practices of Listed Banking Companies in Bangladesh

Directory of Open Access Journals (Sweden)

Md. Abdul Kaium Masud

2017-09-01

Full Text Available “Bangladesh faces many ecological challenges, including air and water contamination, land degradation, and waste management”. Bangladesh faces many ecological challenges, including air and water contamination, land degradation, and waste management. This study was designed to investigate the extent and nature of environmental accounting and reporting of listed banks in Bangladesh in 12 major categories. Information was collected from the annual reports of 20 banks listed on the Dhaka Stock Exchange for the period 2010 to 2014. The results indicate that the banks examined significantly disclosed environmental information for the 12 categories. The study found that banks disclosed the most environmental information for green banking and renewable energy categories, whereas they disclosed the least for environmental recognition and waste management categories. Furthermore, yearly comparison reveals that disclosure of environmental information increased sharply from 16% in 2010 to 83% in 2014. In addition, Bangladesh Bank’s recent fruitful initiatives on environmental disclosures were reviewed, and the findings of the 12 categories have managerial implications for policy makers in corporations as well as the government. It is recommended that professional accounting bodies of Bangladesh, along with international and government policy makers develop a separate conceptual framework for environmental accounting and reporting for the financial and non-financial sectors of the country.

Economic versus environmental improvement potentials of Danish pig farms

DEFF Research Database (Denmark)

Asmild, Mette; Hougaard, Jens Leth

2006-01-01

This article demonstrates how economic and environmental improvement potentials of Danish pig farms can be estimated using Data envelopment analysis (DEA). To avoid some of the problems associated with the definition of undesirable outputs, environmental variables are included as nutrients applied...

Postindustrialization and Environmental Quality: An Empirical Analysis of the Environmental State

Science.gov (United States)

Fisher, Dana R.; Freudenburg, William R.

2004-01-01

Existing sociological analyses express differing expectations about state control over economic actors and the political feasibility of environmental regulation. Recent literature on the environmental state sees environmental protection as becoming a basic responsibility of postindustrial states, with economic actors no longer having the autonomy…

Environmental fiscal reforms

Directory of Open Access Journals (Sweden)

Ashish Chaturvedi

2014-09-01

Full Text Available The paper presents concepts and instruments of environmental fiscal reforms (EFR and their application in the Indian context. EFR can lead to environmental improvement more efficiently and cost effectively than traditional regulation. There is substantial experience of successful EFR implementation in the European Union. India has also adopted some EFR measures such as deregulation of petrol prices, coal cess, and subsidy for setting up common effluent treatment plants. The challenges of implementing EFR measures in India are also discussed, including inadequate analysis, policy framework and institutional capacity, as well as conflict with poverty reduction and building political support.

Commodities, energy and environmental finance

CERN Document Server

Ludkovski, Michael; Sircar, Ronnie

2015-01-01

This volume is a collection of chapters covering the latest developments in applications of financial mathematics and statistics to topics in energy, commodity financial markets and environmental economics. The research presented is based on the presentations and discussions that took place during the Fields Institute Focus Program on Commodities, Energy and Environmental Finance in August 2013. The authors include applied mathematicians, economists and industry practitioners, providing for a multi-disciplinary spectrum of perspectives on the subject. The volume consists of four sections: Electricity Markets; Real Options; Trading in Commodity Markets; and Oligopolistic Models for Energy Production. Taken together, the chapters give a comprehensive summary of the current state of the art in quantitative analysis of commodities and energy finance. The topics covered include structural models of electricity markets, financialization of commodities, valuation of commodity real options, game-theory analysis of ...

Screening Analysis for the Environmental Risk Evaluation System Task 2.1.1.2: Evaluating Effects of Stressors Fiscal Year 2011 Progress Report - Environmental Effects of Marine and Hydrokinetic Energy

Energy Technology Data Exchange (ETDEWEB)

Copping, Andrea E.; Blake, Kara M.; Anderson, Richard M.; Zdanski, Laura C.; Gill, Gary A.; Ward, Jeffrey A.

2011-09-01

Potential environmental effects of marine and hydrokinetic (MHK) energy development are not well understood, and yet regulatory agencies are required to make decisions in spite of substantial uncertainty about environmental impacts and their long-term consequences. An understanding of risks associated with interactions between MHK installations and aquatic receptors, including animals, habitats, and ecosystems, can help define key uncertainties and focus regulatory actions and scientific studies on interactions of most concern. As a first step in developing the Pacific Northwest National Laboratory (PNNL) Environmental Risk Evaluation System (ERES), PNNL scientists conducted a preliminary risk screening analysis on three initial MHK cases. During FY 2011, two additional cases were added: a tidal project in the Gulf of Maine using Ocean Renewable Power Company TidGenTM turbines and a wave project planned for the coast of Oregon using Aquamarine Oyster surge devices. Through an iterative process, the screening analysis revealed that top-tier stressors in the two FY 2011 cases were the dynamic effects of the device (e.g., strike), accidents/disasters, and effects of the static physical presence of the device (e.g., habitat alteration). Receptor interactions with these stressors at the highest tiers of risk were dominated by threatened and endangered animals. Risk to the physical environment from changes in flow regime also ranked high. Peer review of this process and results will be conducted in early FY 2012. The ERES screening analysis provides an analysis of vulnerability of environmental receptors to stressors associated with MHK installations, probability analysis is needed to determine specific risk levels to receptors. “Risk” has two components: (1) The likelihood, or “probability”, of the occurrence of a given interaction or event, and (2) the potential “consequence” if that interaction or event were to occur. During FY 2011, the ERES screening

Analysis of Environmental Law Enforcement Mechanism Based on Economic Principle

Science.gov (United States)

Cao, Hongjun; Shao, Haohao; Cai, Xuesen

2017-11-01

Strengthening and improving the environmental law enforcement mechanism is an important way to protect the ecological environment. This paper is based on economical principles, we did analysis of the marginal management costs by using Pigou means and the marginal transaction costs by using Coase means vary with the quantity growth of pollutant discharge Enterprises. We analyzed all this information, then we got the conclusion as follows. In the process of strengthening the environmental law enforcement mechanism, firstly, we should fully mobilize all aspects of environmental law enforcement, such as legislative bodies and law enforcement agencies, public welfare organizations, television, newspapers, enterprises, people and so on, they need to form a reasonable and organic structure system; then we should use various management means, such as government regulation, legal sanctions, fines, persuasion and denounce, they also need to form an organic structural system.

Interactions between toxic chemicals and natural environmental factors--a meta-analysis and case studies.

Science.gov (United States)

Laskowski, Ryszard; Bednarska, Agnieszka J; Kramarz, Paulina E; Loureiro, Susana; Scheil, Volker; Kudłek, Joanna; Holmstrup, Martin

2010-08-15

The paper addresses problems arising from effects of natural environmental factors on toxicity of pollutants to organisms. Most studies on interactions between toxicants and natural factors, including those completed in the EU project NoMiracle (Novel Methods for Integrated Risk Assessment of Cumulative Stressors in Europe) described herein, showed that effects of toxic chemicals on organisms can differ vastly depending purely on external conditions. We compiled data from 61 studies on effects of temperature, moisture and dissolved oxygen on toxicity of a range of chemicals representing pesticides, polycyclic aromatic hydrocarbons, plant protection products of bacterial origin and trace metals. In 62.3% cases significant interactions (pnatural factors and chemicals were found, reaching 100% for the effect of dissolved oxygen on toxicity of waterborne chemicals. The meta-analysis of the 61 studies showed that the null hypothesis assuming no interactions between toxic chemicals and natural environmental factors should be rejected at p=2.7 x 10(-82) (truncated product method probability). In a few cases of more complex experimental designs, also second-order interactions were found, indicating that natural factors can modify interactions among chemicals. Such data emphasize the necessity of including information on natural factors and their variation in time and across geographic regions in ecological risk assessment. This can be done only if appropriate ecotoxicological test designs are used, in which test organisms are exposed to toxicants at a range of environmental conditions. We advocate designing such tests for the second-tier ecological risk assessment procedures. Copyright 2010 Elsevier B.V. All rights reserved.

Environmental hazard analysis - contamination of nutrients, mercury and cesium-137 in natural waters

International Nuclear Information System (INIS)

Hakanson, L.

1990-01-01

Results from some ongoing Swedish research projects on different types of contamination of limnic as well as marine areas are summarized. A brief theoretical outline on the central concepts of the 'meso-scale-type' of environmental hazard analysis, utilizing examples on eutrophication of coastal waters is given. The concepts are further substantiated in two subsequent parts dealing with radioactive cesium and mercury. The idea is to illustrate that the basic concepts for ('real' world/'meso scale') environmental hazard analysis can be used for different substances and different aquatic environments. It is important to give clear, quantifiable definitions of the effect, dose and environmental sensitivity parameters, which should be valid for a defined area and for a defined span of time. All other parameters should be compatible and have the same area and time resolution. (author)

The design, results and future development of the National Energy Strategy Environmental Analysis Model (NESEAM)

International Nuclear Information System (INIS)

Fisher, R.E.; Boyd, G.A.; Breed, W.S.

1991-01-01

The National Energy Strategy Environmental Model (NESEAM) has been developed to project emissions for the National Energy Strategy (NES). Two scenarios were evaluated for the NES, a Current Policy Base Case and a NES Action Case. The results from the NES Actions Case project much lower emissions than the Current Policy Base Case. Future enhancements to NESEAM will focus on fuel cycle analysis, including future technologies and additional pollutants to model. NESEAM's flexibility will allow it to model other future legislative issues. 7 refs., 4 figs., 2 tabs

Linking Ecological, Environmental and Biogeochemical Data with Multi'omics Analysis

Science.gov (United States)

Hasler-Sheetal, H.; Castorani, M. C.; Fragner, L.; Zeng, Y.; Holmer, M.; Glud, R. N.; Weckwerth, W.; Canfield, D. E.

2016-02-01

The integrated analysis of multi'omics and environmental data provides a holistic understanding of biological processes and has been proven to be challenging. Here we present our research concept for conducting multi-omics experiments and linking them to environmental data. Hypoxia, reduced light availability and species interaction - all amplified by global warming - cause a global decline of seagrasses. Metabolic mechanisms for coping with these global threats are largely unknown and multi'omics approaches can be an important approach for generating this insight. We applied GC, LC-qTOF-MS and bioinformatics to investigate the effects of environmental pressure on metabolites present in seagrasses. In a first experiment we assessed the metabolomics response of the seagrass Zostera marina towards anoxia and showed that photosynthetically derived oxygen could satisfy the oxygen demand in the leaves. But accumulation of fermentation products in the roots showed that the rhizosphere was under anoxic stress. In contrast nocturnal anoxia caused a biphasic shift in the metabolome of roots and leaves. This nocturnal reprogramming of the metabolome under anoxia indicates a mitigation mechanism to avoid the toxic effects. A pathway enrichment analysis proposes the alanine shunt, the GABA shunt and the 2-oxoglutarate shunt as such mitigation mechanisms that alleviate pyruvate levels and lead to carbon and nitrogen storage during anoxia. In a second experiment, varying light exposure and species interaction of Z. marina with the blue mussel Mytilus edulis - a co-occurring species in seagrass systems - resulted in treatment specific metabolic fingerprints in seagrass. Light modified the metabolic fingerprint expressed in Z. marina to the presence of mussels, indicating varying physiological responses to mussels in normal and low light regimes. Multivariate data-analysis indicated light exposure as main driver (45%) and mussel presence as minor driver (13%) for the metabolic

41 CFR 102-80.105 - What information must be included in an equivalent level of safety analysis?

Science.gov (United States)

2010-07-01

... REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire Prevention Equivalent Level.... Each analysis should describe potential reasonable worst case fire scenarios and their impact on the... and location of fuel items, space layout, building construction, openings and ventilation, suppression...

Analysis of the environmental impact of China based on STIRPAT model

International Nuclear Information System (INIS)

Lin Shoufu; Zhao Dingtao; Marinova, Dora

2009-01-01

Assuming that energy consumption is the main source of GHG emissions in China, this paper analyses the effect of population, urbanisation level, GDP per capita, industrialisation level and energy intensity on the country's environmental impact using the STIRPAT model with data for 1978-2006. The analysis shows that population has the largest potential effect on environmental impact, followed by urbanisation level, industrialisation level, GDP per capita and energy intensity. Hence, China's One Child Policy, which restrains rapid population growth, has been an effective way of reducing the country's environmental impact. However, due to the difference in growth rates, GDP per capita had a higher effect on the environmental impact, contributing to 38% of its increase (while population's contribution was at 32%). The rapid decrease in energy intensity was the main factor restraining the increase in China's environmental impact but recently it has also been rising. Against this background, the future of the country looks bleak unless a change in human behaviour towards more ecologically sensitive economic choices occurs.

Meta-Analysis of Comparing Personal and Environmental Factors Effective in Addiction Relapse (Iran, 2004 -2012

Directory of Open Access Journals (Sweden)

s Safari

2014-12-01

Full Text Available Objective: This As a meta-analysis, this study aimed to integrate different studies and investigate the impact of individual and environmental factors on the reappearance of addiction in quitted people. Method: This study is a meta-analysis which uses Hunter and Schmidt approach. For this purpose, 28 out of 42 studies enjoying acceptable methodologies were selected, upon which the meta-analysis was conducted. A meta-analysis checklist was the research instrument. Using summary of the study results, the researcher manually calculated effect size and interpreted it based on the meta-analysis approach and Cohen’s table. Findings: Results revealed that the effect size of environmental factors on addiction relapse was 0.64 while it was obtained 0.41 for individual factors on addiction relapse. Conclusion: According to Cohen’s table, the effect sizes are evaluated as moderate and high for individual factors and environmental factors on addiction relapse, respectively.

Radioactive kryptonates in the analysis of environmental samples

International Nuclear Information System (INIS)

Tolgyessy, J.

1986-01-01

The term ''radioactive Kryptonates'' is used for substances into which atoms or ions of the radioactive nuclide 85 Kr are incorporated. The basis of the use of radioactive Kryptonates in analytical chemistry is that during a chemical reaction the crystalline lattice of the kryptonated carrier is destroyed, the carrier consumed, and the radioactive krypton released (radio-release method). Analysis can be made with a calibration curve or by comparison with a standard. Radio-release methods with the aid of radioactive Kryptonates as analytical reagents are very useful for the analysis of environmental samples, e.g. for the determination of air pollutants (ozone, sulphur dioxide, fluorine, hydrogen fluoride, mercury); and water pollutants (oxygen, dichromate, vanadium, hydrochloric acid, sulphur dioxide). (author)

Look@NanoSIMS--a tool for the analysis of nanoSIMS data in environmental microbiology.

Science.gov (United States)

Polerecky, Lubos; Adam, Birgit; Milucka, Jana; Musat, Niculina; Vagner, Tomas; Kuypers, Marcel M M

2012-04-01

We describe an open-source freeware programme for high throughput analysis of nanoSIMS (nanometre-scale secondary ion mass spectrometry) data. The programme implements basic data processing and analytical functions, including display and drift-corrected accumulation of scanned planes, interactive and semi-automated definition of regions of interest (ROIs), and export of the ROIs' elemental and isotopic composition in graphical and text-based formats. Additionally, the programme offers new functions that were custom-designed to address the needs of environmental microbiologists. Specifically, it allows manual and automated classification of ROIs based on the information that is derived either from the nanoSIMS dataset itself (e.g. from labelling achieved by halogen in situ hybridization) or is provided externally (e.g. as a fluorescence in situ hybridization image). Moreover, by implementing post-processing routines coupled to built-in statistical tools, the programme allows rapid synthesis and comparative analysis of results from many different datasets. After validation of the programme, we illustrate how these new processing and analytical functions increase flexibility, efficiency and depth of the nanoSIMS data analysis. Through its custom-made and open-source design, the programme provides an efficient, reliable and easily expandable tool that can help a growing community of environmental microbiologists and researchers from other disciplines process and analyse their nanoSIMS data. © 2012 Society for Applied Microbiology and Blackwell Publishing Ltd.

Analysis of environmental impact phase in the life cycle of a nuclear power plant

International Nuclear Information System (INIS)

Hernandez del M, C.

2015-01-01

The life-cycle analysis covers the environmental aspects of a product throughout its life cycle. The focus of this study was to apply a methodology of life-cycle analysis for the environmental impact assessment of a nuclear power plant by analyzing international standards ISO 14040 and 14044. The methodology of life-cycle analysis established by the ISO 14044 standard was analyzed, as well as the different impact assessment methodologies of life cycle in order to choose the most appropriate for a nuclear power plant; various tools for the life-cycle analysis were also evaluated, as is the use of software and the use of databases to feed the life cycle inventory. The functional unit chosen was 1 KWh of electricity, the scope of analysis ranging from the construction and maintenance, disposal of spent fuel to the decommissioning of the plant, the manufacturing steps of the fuel were excluded because in Mexico is not done this stage. For environmental impact assessment was chosen the Recipe methodology which evaluates up to 18 impact categories depending on the project. In the case of a nuclear power plant were considered only categories of depletion of the ozone layer, climate change, ionizing radiation and formation of particulate matter. The different tools for life-cycle analysis as the methodologies of impact assessment of life cycle, different databases or use of software have been taken according to the modeling of environmental sensitivities of different regions, because in Mexico the methodology for life-cycle analysis has not been studied and still do not have all the tools necessary for the evaluation, so the uncertainty of the data supplied and results could be higher. (Author)

Present status of neutron activation analysis in environmental research

International Nuclear Information System (INIS)

Steinnes, E.

1984-01-01

Neutron activation analysis, in spite of its many advantageous features, is less widely used than some alternative trace element techniques, and has been losing ground during the last decade. In the environmental field however there are still many problems which can be solved in a better way by the contribution of NAA. The combination of multi-element capability and high accuracy is of great importance in many studies related to atmospheric trace elements. Also in aquatic studies NAA still has a significant role to play. Applications to soils, sediments, and plant material have so far been limited, but there is a place for further development. The scope of NAA in environmental research may be extended by further use of pre-irradiation separations. NAA is particularly important in the certification of analytical reference materials in the environmental field. In future applications of NAA an appropriate combination with other analytical techniques will often be a requisite for success. The general future of NAA is dependent on the availability of nuclear reactors, radiochemical laboratoties and appropriate competence. 21 references

Impact of Environmental Regulation on Productivity: Case Studies of Three Industries in Japan

OpenAIRE

Chalermthanakom, Adisak; Ueta, Kazuhiro

2011-01-01

Although fi rms bear the cost of compliance, strict but fl exible environmental regulation may benefi t them by spurring the innovation process. However, the relationship between environmental regulation and productivity is unclear. We calculate productivity growth by using data envelopment analysis; we then conduct regression analysis, using panel data on productivity growth by environmental regulation stringency. A one-year lag of environmental regulation stringency is included in the model...

Environmental metabolomics: a SWOT analysis (strengths, weaknesses, opportunities, and threats).

Science.gov (United States)

Miller, Marion G

2007-02-01

Metabolomic approaches have the potential to make an exceptional contribution to understanding how chemicals and other environmental stressors can affect both human and environmental health. However, the application of metabolomics to environmental exposures, although getting underway, has not yet been extensively explored. This review will use a SWOT analysis model to discuss some of the strengths, weaknesses, opportunities, and threats that are apparent to an investigator venturing into this relatively new field. SWOT has been used extensively in business settings to uncover new outlooks and identify problems that would impede progress. The field of environmental metabolomics provides great opportunities for discovery, and this is recognized by a high level of interest in potential applications. However, understanding the biological consequence of environmental exposures can be confounded by inter- and intra-individual differences. Metabolomic profiles can yield a plethora of data, the interpretation of which is complex and still being evaluated and researched. The development of the field will depend on the availability of technologies for data handling and that permit ready access metabolomic databases. Understanding the relevance of metabolomic endpoints to organism health vs adaptation vs variation is an important step in understanding what constitutes a substantive environmental threat. Metabolomic applications in reproductive research are discussed. Overall, the development of a comprehensive mechanistic-based interpretation of metabolomic changes offers the possibility of providing information that will significantly contribute to the protection of human health and the environment.

Risk assessment and optimization (ALARA) analysis for the environmental remediation of Brookhaven National Laboratory's hazardous waste management facility

International Nuclear Information System (INIS)

Dionne, B.J.; Morris, S.C. III; Baum, J.W.

1998-01-01

The Department of Energy's (DOE) Office of Environment, Safety, and Health (EH) sought examples of risk-based approaches to environmental restoration to include in their guidance for DOE nuclear facilities. Extensive measurements of radiological contamination in soil and ground water have been made at Brookhaven National Laboratory's Hazardous Waste Management Facility (HWMF) as part of a Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) remediation process. This provided an ideal opportunity for a case study. This report provides a risk assessment and an open-quotes As Low as Reasonably Achievableclose quotes (ALARA) analysis for use at other DOE nuclear facilities as an example of a risk-based decision technique. This document contains the Appendices for the report

SIMS depth profile analysis of environmental microparticles

International Nuclear Information System (INIS)

Konarski, P.

2000-01-01

Environmental and technological research demands chemical characterization of aerosol particles so minute in size, that conventional methods for bulk analyses are simply not applicable. In this work novel application of secondary ion mass spectrometry (SIMS) for characterization of microparticles suspended in atmosphere of the working environment of glass plant Thomson Polkolor, Piaseczno and steelworks Huta Sendzimira, Cracow is presented. The new technique based on sample rotation in depth profile analysis of sub-micrometer particulate material was performed on SAJW-02 analyser equipped with Balzers 16 mm quadrupole spectrometer and sample rotation manipulator using 5 keV Ar + and O 2 + ion beams. The results were compared with the standard method used on ims-3f Cameca analyser 12 keV O 2 + ion beam. Grain size distributions of aerosol microparticles were estimated using eight-stage cascade impactor with particle size range of 0.2 μm to 15 μm. Elemental concentration and crystalline structure of the collected dust particles were performed using spark source mass spectrometry and X-ray diffraction methods. SIMS depth profile analysis shows that sub-micrometer particles do not have uniform morphology, The core-shell structure has been observed for particles collected in both factories. Presented models show that the steelworks particles consists mainly of iron and manganese cores. At the shells of these microparticles :lead, chlorine and fluorine are found. The cores of glass plant submicrometer particles consists mainly of lead-zirconium glass covered by a shell containing carbon and copper. Sample rotation technique applied SIMS appears to be an effective tool for environmental microparticle morphology studies. (author)

The dilemma in prioritizing chemicals for environmental analysis: known versus unknown hazards.

Science.gov (United States)

Anna, Sobek; Sofia, Bejgarn; Christina, Rudén; Magnus, Breitholtz

2016-08-10

A major challenge for society is to manage the risks posed by the many chemicals continuously emitted to the environment. All chemicals in production and use cannot be monitored and science-based strategies for prioritization are essential. In this study we review available data to investigate which substances are included in environmental monitoring programs and published research studies reporting analyses of chemicals in Baltic Sea fish between 2000 and 2012. Our aim is to contribute to the discussion of priority settings in environmental chemical monitoring and research, which is closely linked to chemical management. In total, 105 different substances or substance groups were analyzed in Baltic Sea fish. Polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) were the most studied substances or substance groups. The majority, 87%, of all analyses comprised 20% of the substances or substance groups, whereas 46 substance groups (44%) were analyzed only once. Almost three quarters of all analyses regarded a POP-substance (persistent organic pollutant). These results demonstrate that the majority of analyses on environmental contaminants in Baltic Sea fish concern a small number of already regulated chemicals. Legacy pollutants such as POPs pose a high risk to the Baltic Sea due to their hazardous properties. Yet, there may be a risk that prioritizations for chemical analyses are biased based on the knowns of the past. Such biases may lead to society failing in identifying risks posed by yet unknown hazardous chemicals. Alternative and complementary ways to identify priority chemicals are needed. More transparent communication between risk assessments performed as part of the risk assessment process within REACH and monitoring programs, and information on chemicals contained in consumer articles, would offer ways to identify chemicals for environmental analysis.

Environmental impact and cost analysis of coal versus nuclear power: The U.S. case

International Nuclear Information System (INIS)

Vujić, Jasmina; Antić, Dragoljub P.; Vukmirović, Zorka

2012-01-01

With all energy production systems there are environmental issues to be considered, risks to be assessed, and challenges to be addressed. It must be emphasized that an ideal energy source that is at the same time efficient, cost-effective, environment-friendly, and risk-free does not exist. There are always some necessary trade-offs to be made, in order to ensure optimal use of energy resources, while limiting environmental and health impacts. Nuclear energy is currently the only technology with a secure base-load electricity supply and no greenhouse gas emissions that has the potential to expand at a large scale. However, the spent fuel and safety issues must be addressed. Another base-load electricity source – the fossil-burning power plants – although affordable, emits various air pollutants (chemical and radioactive effluents, dust, ash, etc.), which are dispersed from a power source and transported through various pathways that could lead to the general population exposure. This paper summarizes current status and future trends in base-load electricity sources in the U.S., including environmental footprints, new regulatory requirements, and cost issues. It also presents an analysis of challenges that need to be overcome and opportunities that could us lead us closer to a sustainable energy future.

Genome-wide analysis of protein disorder in Arabidopsis thaliana: implications for plant environmental adaptation.

Science.gov (United States)

Pietrosemoli, Natalia; García-Martín, Juan A; Solano, Roberto; Pazos, Florencio

2013-01-01

Intrinsically disordered proteins/regions (IDPs/IDRs) are currently recognized as a widespread phenomenon having key cellular functions. Still, many aspects of the function of these proteins need to be unveiled. IDPs conformational flexibility allows them to recognize and interact with multiple partners, and confers them larger interaction surfaces that may increase interaction speed. For this reason, molecular interactions mediated by IDPs/IDRs are particularly abundant in certain types of protein interactions, such as those of signaling and cell cycle control. We present the first large-scale study of IDPs in Arabidopsis thaliana, the most widely used model organism in plant biology, in order to get insight into the biological roles of these proteins in plants. The work includes a comparative analysis with the human proteome to highlight the differential use of disorder in both species. Results show that while human proteins are in general more disordered, certain functional classes, mainly related to environmental response, are significantly more enriched in disorder in Arabidopsis. We propose that because plants cannot escape from environmental conditions as animals do, they use disorder as a simple and fast mechanism, independent of transcriptional control, for introducing versatility in the interaction networks underlying these biological processes so that they can quickly adapt and respond to challenging environmental conditions.

Dissertation Defense Computational Fluid Dynamics Uncertainty Analysis for Payload Fairing Spacecraft Environmental Control Systems

Science.gov (United States)

Groves, Curtis Edward

2014-01-01

Spacecraft thermal protection systems are at risk of being damaged due to airflow produced from Environmental Control Systems. There are inherent uncertainties and errors associated with using Computational Fluid Dynamics to predict the airflow field around a spacecraft from the Environmental Control System. This paper describes an approach to quantify the uncertainty in using Computational Fluid Dynamics to predict airflow speeds around an encapsulated spacecraft without the use of test data. Quantifying the uncertainty in analytical predictions is imperative to the success of any simulation-based product. The method could provide an alternative to traditional "validation by test only" mentality. This method could be extended to other disciplines and has potential to provide uncertainty for any numerical simulation, thus lowering the cost of performing these verifications while increasing the confidence in those predictions. Spacecraft requirements can include a maximum airflow speed to protect delicate instruments during ground processing. Computational Fluid Dynamics can be used to verify these requirements; however, the model must be validated by test data. This research includes the following three objectives and methods. Objective one is develop, model, and perform a Computational Fluid Dynamics analysis of three (3) generic, non-proprietary, environmental control systems and spacecraft configurations. Several commercially available and open source solvers have the capability to model the turbulent, highly three-dimensional, incompressible flow regime. The proposed method uses FLUENT, STARCCM+, and OPENFOAM. Objective two is to perform an uncertainty analysis of the Computational Fluid Dynamics model using the methodology found in "Comprehensive Approach to Verification and Validation of Computational Fluid Dynamics Simulations". This method requires three separate grids and solutions, which quantify the error bars around Computational Fluid Dynamics

Dissertation Defense: Computational Fluid Dynamics Uncertainty Analysis for Payload Fairing Spacecraft Environmental Control Systems

Science.gov (United States)

Groves, Curtis Edward

2014-01-01

Spacecraft thermal protection systems are at risk of being damaged due to airflow produced from Environmental Control Systems. There are inherent uncertainties and errors associated with using Computational Fluid Dynamics to predict the airflow field around a spacecraft from the Environmental Control System. This paper describes an approach to quantify the uncertainty in using Computational Fluid Dynamics to predict airflow speeds around an encapsulated spacecraft without the use of test data. Quantifying the uncertainty in analytical predictions is imperative to the success of any simulation-based product. The method could provide an alternative to traditional validation by test only mentality. This method could be extended to other disciplines and has potential to provide uncertainty for any numerical simulation, thus lowering the cost of performing these verifications while increasing the confidence in those predictions.Spacecraft requirements can include a maximum airflow speed to protect delicate instruments during ground processing. Computational Fluid Dynamics can be used to verify these requirements; however, the model must be validated by test data. This research includes the following three objectives and methods. Objective one is develop, model, and perform a Computational Fluid Dynamics analysis of three (3) generic, non-proprietary, environmental control systems and spacecraft configurations. Several commercially available and open source solvers have the capability to model the turbulent, highly three-dimensional, incompressible flow regime. The proposed method uses FLUENT, STARCCM+, and OPENFOAM. Objective two is to perform an uncertainty analysis of the Computational Fluid Dynamics model using the methodology found in Comprehensive Approach to Verification and Validation of Computational Fluid Dynamics Simulations. This method requires three separate grids and solutions, which quantify the error bars around Computational Fluid Dynamics predictions

The application of computer image analysis in life sciences and environmental engineering

Science.gov (United States)

Mazur, R.; Lewicki, A.; Przybył, K.; Zaborowicz, M.; Koszela, K.; Boniecki, P.; Mueller, W.; Raba, B.

2014-04-01

The main aim of the article was to present research on the application of computer image analysis in Life Science and Environmental Engineering. The authors used different methods of computer image analysis in developing of an innovative biotest in modern biomonitoring of water quality. Created tools were based on live organisms such as bioindicators Lemna minor L. and Hydra vulgaris Pallas as well as computer image analysis method in the assessment of negatives reactions during the exposition of the organisms to selected water toxicants. All of these methods belong to acute toxicity tests and are particularly essential in ecotoxicological assessment of water pollutants. Developed bioassays can be used not only in scientific research but are also applicable in environmental engineering and agriculture in the study of adverse effects on water quality of various compounds used in agriculture and industry.

Isotope dilution and sampling factors of the quality assurance and TQM of environmental analysis

International Nuclear Information System (INIS)

Macasek, F.

1999-01-01

Sampling and preparatory treatment of environmental objects is discussed from the view of their information content, functional speciation of the pollutant, statistical distribution treatment and uncertainty assessment. During homogenization of large samples, a substantial information may be lost and validity of environmental information becomes vague. Isotope dilution analysis is discussed as the most valuable tool for both validity of analysis and evaluation of samples variance. Data collection for a non-parametric statistical treatment of series of 'non-representative' sub-samples, and physico-chemical speciation of analyte may actually better fulfill criteria of similarity and representativeness. Large samples are often required due to detection limits of analysis, but the representativeness of environmental samples should by understood not only by the mean analyte concentration, but also by its spatial and time variance. Hence, heuristic analytical scenarios and interpretation of results must be designed by cooperation of environmentalists and analytical chemists. (author)

Analysis of methods for evaluating environmental costs: a view from environmental accounting research. case: construction of highway, vía al mar Cartagena-Barranquilla section 1

Directory of Open Access Journals (Sweden)

José Julio Vergara Arrieta

2016-11-01

Full Text Available This document is the first breakthrough in the research project entitled “Measurement and assessment of social and environmental costs of Dual Carriageway Vía al Mar Cartagena- Barranquilla section 1 Barrio Crespo – Entrance Villages Tierra Baja and Puerto Rey” funded by the University of San Buenaventura Cartagena. In it the conclusions of the search and theoretical-critical analysis of the different methods, methodologies or techniques that address the issue of valuation of environmental quality in order to develop the first approaches to valuation exercise environmental costs are collected. The position for the present analysis is adopted from an investigative standpoint of accounting field, based on performing and / or environmental reality heterodox approaches.

Just fracking: a distributive environmental justice analysis of unconventional gas development in Pennsylvania, USA

Science.gov (United States)

Clough, Emily; Bell, Derek

2016-02-01

This letter presents a distributive environmental justice analysis of unconventional gas development in the area of Pennsylvania lying over the Marcellus Shale, the largest shale gas formation in play in the United States. The extraction of shale gas using unconventional wells, which are hydraulically fractured (fracking), has increased dramatically since 2005. As the number of wells has grown, so have concerns about the potential public health effects on nearby communities. These concerns make shale gas development an environmental justice issue. This letter examines whether the hazards associated with proximity to wells and the economic benefits of shale gas production are fairly distributed. We distinguish two types of distributive environmental justice: traditional and benefit sharing. We ask the traditional question: are there a disproportionate number of minority or low-income residents in areas near to unconventional wells in Pennsylvania? However, we extend this analysis in two ways: we examine income distribution and level of education; and we compare before and after shale gas development. This contributes to discussions of benefit sharing by showing how the income distribution of the population has changed. We use a binary dasymetric technique to remap the data from the 2000 US Census and the 2009-2013 American Communities Survey and combine that data with a buffer containment analysis of unconventional wells to compare the characteristics of the population living nearer to unconventional wells with those further away before and after shale gas development. Our analysis indicates that there is no evidence of traditional distributive environmental injustice: there is not a disproportionate number of minority or low-income residents in areas near to unconventional wells. However, our analysis is consistent with the claim that there is benefit sharing distributive environmental injustice: the income distribution of the population nearer to shale gas wells

Environmental impact report (draft)

Energy Technology Data Exchange (ETDEWEB)

1980-05-01

The three projects as proposed by Pacific Gas and Electric Company and the environmental analysis of the projects are discussed. Sections on the natural and social environments of the proposed projects and their surrounding areas consist of descriptions of the setting, discussions of the adverse and beneficial consequences of the project, and potential mitigation measures to reduce the effects of adverse impacts. The Environmental Impact Report includes discussions of unavoidable adverse effects, irreversible changes, long-term and cumulative impacts, growth-inducing effects, and feasible alternatives to the project. (MHR)

Stripping voltammetry in environmental and food analysis.

Science.gov (United States)

Brainina, K Z; Malakhova, N A; Stojko, N Y

2000-10-01

The review covers over 230 papers published mostly in the last 5 years. The goal of the review is to attract the attention of researchers and users to stripping voltammetry in particular, its application in environmental monitoring and analysis of foodstuffs. The sensors employed are impregnated graphite, carbon paste, thick film carbon/graphite and thin film metallic electrodes modified in-situ or beforehand. Hanging mercury drop electrodes and mercury coated glassy carbon electrodes are also mentioned. Strip and long-lived sensors for portable instruments and flow through systems are discussed as devices for future development and application of stripping voltammetry.

A consistent response spectrum analysis including the resonance range

International Nuclear Information System (INIS)

Schmitz, D.; Simmchen, A.

1983-01-01

The report provides a complete consistent Response Spectrum Analysis for any component. The effect of supports with different excitation is taken into consideration, at is the description of the resonance ranges. It includes information explaining how the contributions of the eigenforms with higher eigenfrequencies are to be considered. Stocking of floor response spectra is also possible using the method described here. However, modified floor response spectra must now be calculated for each building mode. Once these have been prepared, the calculation of the dynamic component values is practically no more complicated than with the conventional, non-consistent methods. The consistent Response Spectrum Analysis can supply smaller and larger values than the conventional theory, a fact which can be demonstrated using simple examples. The report contains a consistent Response Spectrum Analysis (RSA), which, as far as we know, has been formulated in this way for the first time. A consistent RSA is so important because today this method is preferentially applied as an important tool for the earthquake proof of components in nuclear power plants. (orig./HP)

Differences in environmental preferences towards cycling for transport among adults: a latent class analysis.

Science.gov (United States)

Mertens, Lieze; Van Cauwenberg, Jelle; Ghekiere, Ariane; De Bourdeaudhuij, Ilse; Deforche, Benedicte; Van de Weghe, Nico; Van Dyck, Delfien

2016-08-12

Increasing cycling for transport can contribute to improve public health among adults. Micro-environmental factors (i.e. small-scaled street-setting features) may play an important role in affecting the street's appeal to cycle for transport. Understanding about the interplay between individuals and their physical environment is important to establish tailored environmental interventions. Therefore, the current study aimed to examine whether specific subgroups exist based on similarities in micro-environmental preferences to cycle for transport. Responses of 1950 middle-aged adults (45-65 years) on a series of choice tasks depicting potential cycling routes with manipulated photographs yielded three subgroups with different micro-environmental preferences using latent class analysis. Although latent class analysis revealed three different subgroups in the middle-aged adult population based on their environmental preferences, results indicated that cycle path type (i.e. a good separated cycle path) is the most important environmental factor for all participants and certainly for individuals who did not cycle for transport. Furthermore, only negligible differences were found between the importances of the other micro-environmental factors (i.e. traffic density, evenness of the cycle path, maintenance, vegetation and speed limits) regarding the two at risk subgroups and that providing a speed bump obviously has the least impact on the street's appeal to cycle for transport. Results from the current study indicate that only negligible differences were found between the three subgroups. Therefore, it might be suggested that tailored environmental interventions are not required in this research context.

Atmospheric environment measurement 3. Environmental pollution monitoring system using PIXE analysis

International Nuclear Information System (INIS)

Ishii, Keizo

2009-01-01

The PIXE(Proton Induced X-ray Emission) method is used in various fields owing to its high sensitivity. This method can be used to analyze multiple elements in a short time and therefore is suitable for the analysis of large quantities of environmental samples. We researched the effect of removing footwear in a room on indoor aerosol pollution. The concentration of aerosol particles in the case that footwear was not removed was 5 times larger than in the case when footwear was removed. We were able to identify a source of air pollution using both the results of PIXE analysis and information on wind direction. We applied PIXE analysis to investigate airborne yellow sand, which originals from the Gobi desert. By analyzing each yellow sand particle, hazardous yellow sand could be detected. We also applied PIXE analysis to river water pollution. River water samples were collected at a number of points along a river. The dilution of metallic elements by the river water was observed. Thus, it was shown that monitoring systems using the PIXE method are very useful for monitoring environmental pollution. (author)

Essays on environmental policy analysis: Computable general equilibrium approaches applied to Sweden

International Nuclear Information System (INIS)

Hill, M.

2001-01-01

This thesis consists of three essays within the field of applied environmental economics, with the common basic aim of analyzing effects of Swedish environmental policy. Starting out from Swedish environmental goals, the thesis assesses a range of policy-related questions. The objective is to quantify policy outcomes by constructing and applying numerical models especially designed for environmental policy analysis. Static and dynamic multi-sectoral computable general equilibrium models are developed in order to analyze the following issues. The costs and benefits of a domestic carbon dioxide (CO 2 ) tax reform. Special attention is given to how these costs and benefits depend on the structure of the tax system and, furthermore, how they depend on policy-induced changes in 'secondary' pollutants. The effects of allowing for emission permit trading through time when the domestic long-term domestic environmental goal is specified in CO 2 stock terms. The effects on long-term projected economic growth and welfare that are due to damages from emission flow and accumulation of 'local' pollutants (nitrogen oxides and sulfur dioxide), as well as the outcome of environmental policy when costs and benefits are considered in an integrated environmental-economic framework

An analysis of environmental data transmission

Science.gov (United States)

Yuan, Lina; Chen, Huajun; Gong, Jing

2017-05-01

To comprehensively construct environmental automatic monitoring has become the urgent need of environmental management, is a major measure to implement the scientific outlook on development and build a harmonious socialist society, and is an inevitable choice of “building a resource-conserving and environment-friendly society”, which is of great importance and profound significance to adjust the economic structure and transform growth pattern. This article first introduces the importance of environmental data transmission, then expounds the characteristics, key technologies, transmitting mode, and design ideas of environmental data transmission process, and finally, summarizes the full text.

Meta-analysis of studies using suppression subtractive hybridization and microarrays to investigate the effects of environmental stress on gene transcription in oysters.

Science.gov (United States)

Anderson, Kelli; Taylor, Daisy A; Thompson, Emma L; Melwani, Aroon R; Nair, Sham V; Raftos, David A

2015-01-01

Many microarray and suppression subtractive hybridization (SSH) studies have analyzed the effects of environmental stress on gene transcription in marine species. However, there have been no unifying analyses of these data to identify common stress response pathways. To address this shortfall, we conducted a meta-analysis of 14 studies that investigated the effects of different environmental stressors on gene expression in oysters. The stressors tested included chemical contamination, hypoxia and infection, as well as extremes of temperature, pH and turbidity. We found that the expression of over 400 genes in a range of oyster species changed significantly after exposure to environmental stress. A repeating pattern was evident in these transcriptional responses, regardless of the type of stress applied. Many of the genes that responded to environmental stress encoded proteins involved in translation and protein processing (including molecular chaperones), the mitochondrial electron transport chain, anti-oxidant activity and the cytoskeleton. In light of these findings, we put forward a consensus model of sub-cellular stress responses in oysters.

Influence factors analysis of water environmental quality of main rivers in Tianjin

Science.gov (United States)

Li, Ran; Bao, Jingling; Zou, Di; Shi, Fang

2018-01-01

According to the evaluation results of the water environment quality of main rivers in Tianjin in 1986-2015, this paper analyzed the current situation of water environmental quality of main rivers in Tianjin retrospectively, established the index system and multiple factors analysis through selecting factors influencing the water environmental quality of main rivers from the economy, industry and nature aspects with the combination method of principal component analysis and linear regression. The results showed that water consumption, sewage discharge and water resources were the main factors influencing the pollution of main rivers. Therefore, optimizing the utilization of water resources, improving utilization efficiency and reducing effluent discharge are important measures to reduce the pollution of surface water environment.

GIS environmental information analysis of the Darro River basin as the key for the management and hydrological forest restoration.

Science.gov (United States)

Fernandez, Paz; Delgado, Expectación; Lopez-Alonso, Mónica; Poyatos, José Manuel

2018-02-01

This article presents analyses of soil and environmental information for the Darro River basin (Granada-Spain) preliminary to its hydrological and forestry restoration. These analyses were carried out using a geographical information system (GIS) and employing a new procedure that adapts hydrological forest-restoration methods. The complete analysis encompasses morphological conditions, soil and climate characteristics as well as vegetation and land use. The study investigates soil erosion in the basin by using Universal Soil Loss Equation (USLE) and by mapping erosion fragility units. The results are presented in a set of maps and their analysis, providing the starting point for river basin management and the hydrological and forestry-restoration project that was approved at the end of 2015. The presence of soft substrates (e.g. gravel and sand) indicates that the area is susceptible to erosion, particularly the areas that are dominated by human activity and have little soil protection. Finally, land use and vegetation cover were identified as key factors in the soil erosion in the basin. According to the results, river authorities have included several measures in the restoration project aimed at reducing the erosion and helping to recover the environmental value of this river basin and to include it in recreation possibilities for the community of Granada. The presented analytical approach, designed by the authors, would be useful as a tool for environmental restoration in other small Mediterranean river basins. Copyright © 2017 Elsevier B.V. All rights reserved.

Acceptable Risk Analysis for Abrupt Environmental Pollution Accidents in Zhangjiakou City, China.

Science.gov (United States)

Du, Xi; Zhang, Zhijiao; Dong, Lei; Liu, Jing; Borthwick, Alistair G L; Liu, Renzhi

2017-04-20

Abrupt environmental pollution accidents cause considerable damage worldwide to the ecological environment, human health, and property. The concept of acceptable risk aims to answer whether or not a given environmental pollution risk exceeds a societally determined criterion. This paper presents a case study on acceptable environmental pollution risk conducted through a questionnaire survey carried out between August and October 2014 in five representative districts and two counties of Zhangjiakou City, Hebei Province, China. Here, environmental risk primarily arises from accidental water pollution, accidental air pollution, and tailings dam failure. Based on 870 valid questionnaires, demographic and regional differences in public attitudes towards abrupt environmental pollution risks were analyzed, and risk acceptance impact factors determined. The results showed females, people between 21-40 years of age, people with higher levels of education, public servants, and people with higher income had lower risk tolerance. People with lower perceived risk, low-level risk knowledge, high-level familiarity and satisfaction with environmental management, and without experience of environmental accidents had higher risk tolerance. Multiple logistic regression analysis indicated that public satisfaction with environmental management was the most significant factor in risk acceptance, followed by perceived risk of abrupt air pollution, occupation, perceived risk of tailings dam failure, and sex. These findings should be helpful to local decision-makers concerned with environmental risk management (e.g., selecting target groups for effective risk communication) in the context of abrupt environmental accidents.

Integrated cost-effectiveness analysis of agri-environmental measures for water quality.

Science.gov (United States)

Balana, Bedru B; Jackson-Blake, Leah; Martin-Ortega, Julia; Dunn, Sarah

2015-09-15

This paper presents an application of integrated methodological approach for identifying cost-effective combinations of agri-environmental measures to achieve water quality targets. The methodological approach involves linking hydro-chemical modelling with economic costs of mitigation measures. The utility of the approach was explored for the River Dee catchment in North East Scotland, examining the cost-effectiveness of mitigation measures for nitrogen (N) and phosphorus (P) pollutants. In-stream nitrate concentration was modelled using the STREAM-N and phosphorus using INCA-P model. Both models were first run for baseline conditions and then their effectiveness for changes in land management was simulated. Costs were based on farm income foregone, capital and operational expenditures. The costs and effects data were integrated using 'Risk Solver Platform' optimization in excel to produce the most cost-effective combination of measures by which target nutrient reductions could be attained at a minimum economic cost. The analysis identified different combination of measures as most cost-effective for the two pollutants. An important aspect of this paper is integration of model-based effectiveness estimates with economic cost of measures for cost-effectiveness analysis of land and water management options. The methodological approach developed is not limited to the two pollutants and the selected agri-environmental measures considered in the paper; the approach can be adapted to the cost-effectiveness analysis of any catchment-scale environmental management options. Copyright © 2015 Elsevier Ltd. All rights reserved.

A review of the reliability analysis of LPRS including the components repairs

International Nuclear Information System (INIS)

Oliveira, L.F.S. de; Fleming, P.V.; Frutuoso e Melo, P.F.F.; Tayt-Sohn, L.C.

1983-01-01

The reliability analysis of low pressure recirculation system in its long-term recicurlation phase before 24hs is presented. The possibility of repairing the components out of the containment is included. A general revision of analysis of the short-term recirculation phase is done. (author) [pt

Strategic environmental assessment (SEA) as a means to include environmental knowledge in decision making in the case of an aluminium reduction plant in Greenland

DEFF Research Database (Denmark)

Hansen, Anne Merrild

2011-01-01

The purpose and means of strategic environmental assessment (SEA) can vary depending on the case investigated and interests of actors involved. Based on the objective for the SEA of a proposed aluminium reduction plant (ARP) in Greenland, this paper evaluates the SEA’s effectiveness in securing...... environmental knowledge in a decision-making process. It is concluded that the SEA secured inclusion of environmental knowledge in three out of four key decision arenas, which determined the direction and outcome of the process. The results from the SEA did not oppose the recommendations based on the economic...... assessments. As there was no conflict between economic and environmental recommendations, and hence no visible proof of SEA’s influence on the outcome of the decision, it is discussed whether environmental knowledge, in this decision making process, equals influence. The investigation was carried out...

Optimizing decentralized renewable energy production by combining potentials and integrated environmental impact analysis. A case study in the Hannover region

Energy Technology Data Exchange (ETDEWEB)

Palmas, Claudia; Siewert, Almut [Leibniz Univ. of Hannover (Germany). Dept. of Environmental Planning

2013-07-01

In Europe, the integration of decentralized renewable energy production in regional planning processes plays a crucial role. In particular, regions face a major challenge in order to set up renewable decentralized energy systems and incorporate them into the electricity grid. This paper presents a methodological concept and preliminary tests of applications in order to create an optimization model for an improved renewable energy development and planning practice: firstly, the energy potentials of micro renewable resources are estimated, and secondly the outcomes are combined with an estimation of resulting environmental impacts. Including these data into the spatial analysis, different scenarios can be developed in order to support decision making in landscape planning on the basis of environmental and landscape criteria as well as energy issues, including technical aspects and costs. The case study area is the Hannover region. First results show good energy potentials, which will be in a next step evaluated and combined with environmental impacts in order to improve energy efficiency by integrated renewable, decentralized power plants and energy mix. (orig.)

The market for environmental efficient technology; Markedet for miljoeeffektiv teknologi

Energy Technology Data Exchange (ETDEWEB)

Engbo Rasmussen, Peter; Madsen, Peter G. [COWI (Denmark)

2006-08-31

As part of governmental preparation of a Danish action plan for environmental efficient technology, COWI has made an analysis of the global market for technological solutions to important environmental challenges. The analysis focuses on technology for solving environmental challenges connected with climate changes, exploitation of water resources as well as pollution that poses a threat to health including air pollution and chemicals. The Analysis is based on reports made in Denmark, significant export countries, the European Union and different international organizations e.g. OECD and the International Energy Agency. This report presents results of the analysis. Due to the fact that the analysis was completed late in 2005 it is solely based on data and reports known at the time. (BA)

Environmental Behavior of Secondary Education Students: A Case Study at Central Greece

Directory of Open Access Journals (Sweden)

Stamatios Ntanos

2018-05-01

Full Text Available During the last three decades, human behavior has been becoming energy alarming towards environmental sustainability. One of the most influential initiatives towards environmental protection and increased environmental consciousness is the solidification of primary and secondary environmental education. The purpose of this paper is to investigate different environmental profiles amongst secondary education students, in light of a multi-parametric analysis that involved the contributive role of school and family towards environmental awareness and participation. By reviewing relevant studies, the benefits offered by environmental education are presented. Accordingly, a questionnaire survey was deployed using a sample of 270 secondary education students, from schools situated in the prefecture of Larissa, central Greece. The statistical methods included factor analysis and cluster analysis. Particularly, four groups of different environmental characteristics are identified and interviewed. Results suggest that most students are environmental affectionate, although there is a need for more solidified environmental education and motivation from out-of-school societal opportunities, such as in the contexts of family and public socialization. The deployed research method and analysis can be proven supportive in adopting and scheduling school environmental programs after an initial identification of the various environmental attitudes among the student population.

Gold nanoparticle-based optical microfluidic sensors for analysis of environmental pollutants

DEFF Research Database (Denmark)

Lafleur, Josiane P.; Senkbeil, Silja; Jensen, Thomas G.

2012-01-01

Conventional methods of environmental analysis can be significantly improved by the development of portable microscale technologies for direct in-field sensing at remote locations. This report demonstrates the vast potential of gold nanoparticle-based microfluidic sensors for the rapid, in......-field, detection of two important classes of environmental contaminants – heavy metals and pesticides. Using gold nanoparticle-based microfluidic sensors linked to a simple digital camera as the detector, detection limits as low as 0.6 μg L−1 and 16 μg L−1 could be obtained for the heavy metal mercury...... and the dithiocarbamate pesticide ziram, respectively. These results demonstrate that the attractive optical properties of gold nanoparticle probes combine synergistically with the inherent qualities of microfluidic platforms to offer simple, portable and sensitive sensors for environmental contaminants....

Trace element analysis of human hair by neutron activation technique. Part of a coordinated programme on health-related environmental research, using nuclear techniques

International Nuclear Information System (INIS)

Kim, N.B.

1982-10-01

Hair mineral analysis was performed to measure population exposure to a number of environmental elemental pollutants. A total of 44 scalp hair samples from young Korean army recruits living in Seoul were analysed by INAA for 26 elements, including such elements of environmental health interest as As, Cd, and Hg. The levels reported were comparable with those reported in open literature. These results indicated that there was no evidence of any harmful exposure of the individuals studied to the metal pollutants monitored

Economic and environmental impacts of dietary changes in Iran : an input-output analysis

NARCIS (Netherlands)

Rahmani, R.; Bakhshoodeh, M.; Zibaei, M.; Heijman, W.J.M.; Eftekhari, M.H.

2012-01-01

Iran's simple and environmentally extended commodity by commodity input-output (IO) model was used to determine the impacts of dietary changes on the Iranian economy and on the environmental load. The original model is based on the status-quo diet and was modified to include the World Health

Charting the trends in nuclear techniques for analysis of inorganic environmental pollutants

International Nuclear Information System (INIS)

Braun, T.

1986-01-01

Publications in Analytical Abstracts in the period 1975-1984 and papers presented at the Modern Trends in Activation Analysis international conferences series in the period 1961-1986 have been used as an empirical basis for assessing general trends in research and publication activity. Some ebbs and flows in the speciality of instrumental techniques for analysis of environmental trace pollutants are revealed by a statistical analysis of the publications. (author)

Contributions for the application of a phoswich detector on the analysis of environmental samples

International Nuclear Information System (INIS)

Dalaqua Junior, L.

1989-01-01

The characteristics of a phoswich detector and the parameters of the pulse shape descrimination system are evaluated aiming the application on environmental analysis by direct low level gamma ray spectrometry. The calibration curves and adjustments for the pulse discrimination, detector resolution and homogeneity measurements are presented. Background reduction and the 210 Pb detection eficiency on evaporated sources are evaluated. The results obtained demonstrates the application potentiality on the analysis of environmental samples due to a high detection eficiency and good geometry conditions to the measurements. (author) [pt

Environmental Systems Research FY-99 annual report

International Nuclear Information System (INIS)

Miller, D.L.

2000-01-01

The Environmental Systems Research (ESR) Program, a part of the Environmental Systems Research and Analysis (ESRA) Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Department of Energy's Office of Environmental Management (EM). The original portfolio of research activities was assembled after an analysis of the EM technology development and science needs as gathered by the Site Technology Coordination Groups (STCGs) complex-wide. Current EM investments in science and technology throughout the research community were also included in this analysis to avoid duplication of efforts. This is a progress report for the second year of the ESR Program (Fiscal Year 99). A report of activities is presented for the five ESR research investment areas: (a) Transport Aspects of Selective Mass Transport Agents, (b) Chemistry of Environmental Surfaces, (c) Materials Dynamics, (d) Characterization Science, and (e) Computational Simulation of Mechanical and Chemical Systems. In addition to the five technical areas, activities in the Science and Technology Foundations element of the program, e.g., interfaces between ESR and the EM Science Program (EMSP) and the EM Focus Areas, are described

Environmental Systems Research, FY-99 Annual Report

Energy Technology Data Exchange (ETDEWEB)

Miller, David Lynn

2000-01-01

The Environmental Systems Research (ESR) Program, a part of the Environmental Systems Research and Analysis (ESRA) Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Department of Energy's Office of Environmental Management (EM). The original portfolio of research activities was assembled after an analysis of the EM technology development and science needs as gathered by the Site Technology Coordination Groups (STCGs) complex-wide. Current EM investments in science and technology throughout the research community were also included in this analysis to avoid duplication of efforts. This is a progress report for the second year of the ESR Program (Fiscal Year 99). A report of activities is presented for the five ESR research investment areas: (a) Transport Aspects of Selective Mass Transport Agents, (b) Chemistry of Environmental Surfaces, (c) Materials Dynamics, (d) Characterization Science, and (e) Computational Simulation of Mechanical and Chemical Systems. In addition to the five technical areas, activities in the Science and Technology Foundations element of the program, e.g., interfaces between ESR and the EM Science Program (EMSP) and the EM Focus Areas, are described.

Environmental Systems Research FY-99 Annual Report

Energy Technology Data Exchange (ETDEWEB)

Miller, D.L.

2000-01-01

The Environmental Systems Research (ESR) Program, a part of the Environmental Systems Research and Analysis (ESRA) Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Department of Energy's Office of Environmental Management (EM). The original portfolio of research activities was assembled after an analysis of the EM technology development and science needs as gathered by the Site Technology Coordination Groups (STCGs) complex-wide. Current EM investments in science and technology throughout the research community were also included in this analysis to avoid duplication of efforts. This is a progress report for the second year of the ESR Program (Fiscal Year 99). A report of activities is presented for the five ESR research investment areas: (a) Transport Aspects of Selective Mass Transport Agents, (b) Chemistry of Environmental Surfaces, (c) Materials Dynamics, (d) Characterization Science, and (e) Computational Simulation of Mechanical and Chemical Systems. In addition to the five technical areas, activities in the Science and Technology Foundations element of the program, e.g., interfaces between ESR and the EM Science Program (EMSP) and the EM Focus Areas, are described.

Preconcentration of traces of radionuclides and elements with foamed polyurethane sorbents in the analysis of environmental samples

International Nuclear Information System (INIS)

Palagyi, S.; Braun, T.

1986-01-01

The importance of preconcentration and the permanent need of efficient preconcentrating agents in environmental analysis are pointed out. Foamed polyurethane sorbents draw attention as novel agents in separation chemistry. A survey is presented of recent applications of unloaded and reagent-loaded open-cell type resilient polyurethane foams in the separation and preconcentration of radionuclides from environmental samples, and of the latest uses of these foams in the preconcentration and detection of traces of some, mainly inorganic materials in environmental samples, using radioanalytical techniques. Possible future uses of polyurethane foams in trace element detection in environmental analysis are outlined. (author)

Differences in environmental preferences towards cycling for transport among adults: a latent class analysis

Directory of Open Access Journals (Sweden)

Lieze Mertens

2016-08-01

Full Text Available Abstract Background Increasing cycling for transport can contribute to improve public health among adults. Micro-environmental factors (i.e. small-scaled street-setting features may play an important role in affecting the street’s appeal to cycle for transport. Understanding about the interplay between individuals and their physical environment is important to establish tailored environmental interventions. Therefore, the current study aimed to examine whether specific subgroups exist based on similarities in micro-environmental preferences to cycle for transport. Methods Responses of 1950 middle-aged adults (45–65 years on a series of choice tasks depicting potential cycling routes with manipulated photographs yielded three subgroups with different micro-environmental preferences using latent class analysis. Results Although latent class analysis revealed three different subgroups in the middle-aged adult population based on their environmental preferences, results indicated that cycle path type (i.e. a good separated cycle path is the most important environmental factor for all participants and certainly for individuals who did not cycle for transport. Furthermore, only negligible differences were found between the importances of the other micro-environmental factors (i.e. traffic density, evenness of the cycle path, maintenance, vegetation and speed limits regarding the two at risk subgroups and that providing a speed bump obviously has the least impact on the street’s appeal to cycle for transport. Conclusions Results from the current study indicate that only negligible differences were found between the three subgroups. Therefore, it might be suggested that tailored environmental interventions are not required in this research context.

An analysis software of tritium distribution in food and environmental water in China

International Nuclear Information System (INIS)

Li Wenhong; Xu Cuihua; Ren Tianshan; Deng Guilong

2006-01-01

Objective: The purpose of developing this analysis-software of tritium distribution in food and environmental water is to collect tritium monitoring data, to analyze the data, both automatically, statistically and graphically, and to study and share the data. Methods: Based on the data obtained before, analysis-software is wrote by using VC++. NET as tool software. The software first transfers data from EXCEL into a database. It has additive function of data-append, so operators can embody new monitoring data easily. Results: After turning the monitoring data saved as EXCEL file by original researchers into a database, people can easily access them. The software provides a tool of distributing-analysis of tritium. Conclusion: This software is a first attempt of data-analysis about tritium level in food and environmental water in China. Data achieving, searching and analyzing become easily and directly with the software. (authors)

The complementary use of radioanalytical methods and trace analysis methods for the characterisation of environmental IAEA reference materials

International Nuclear Information System (INIS)

De Regge, P.; Burns, K.; Campbell, M.; Makarewicz, M.; Markowicz, A.; Mattiuzzi, M.; Tajani, A.; Toervenyi, A.; Zeiller, E.

2001-01-01

The IAEA laboratories have access to both nuclear analytical methods and conventional instrumental methods for trace analysis for the characterisation of its environmental and biological reference materials. A technical concept integrating the homogeneity data, the recommended test portion mass and the uncertainty on the trace element concentrations is explored using a combination of INAA, XRF, ICP-MS, ICP-AES, and AAS. The above approach is illustrated by selected examples of reference materials currently under evaluation for their trace element content. They include some or all of the following elements Al, As, Br, Ca, Cd, Co, Cr, Cs, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, Pb, Rb, Se, Sr, Th, U, Zn in environmental biomonitor organisms (lichen, algae) and air dust filters. (author)

Environmental Inequality in China: A “Pyramid Model” and Nationwide Pilot Analysis of Prefectures with Sources of Industrial Pollution

Directory of Open Access Journals (Sweden)

Qi He

2017-10-01

Full Text Available In China, environmental pollution generated via industrialization as well as profound changes in the social structure and the gradual maturation of the social hierarchy have jointly contributed to the Chinese people’s increased environmental consciousness and appeals for environmental justice (EJ. Because of the absence of an EJ theory and a lack of empirical research focused on China, this paper proposes a “Pyramid Model” for EJ research in China that includes the following three factors: basic demographic and socioeconomic characteristics, U.S.-based EJ principles, and Chinese characteristics. A nationwide pilot analysis of environmental inequality at the prefecture level is conducted by empirically examining the association between the demographic variables and socioeconomic status with sources of industrial pollution in China. The prefecture-based results are shown to be robust, and they indicate that areas inhabited by ethnic minorities and western regions of China carry disproportionate environmental burdens. However, a different picture for migrants is presented, revealing that Chinese migrants are not currently exposed to greater levels of industrial pollution. Relevant interpretations of these findings are provided. The results also show that environmental inequality associated with income level, which is observed in the U.S., does not occur in China.

Use of graphite layer open tubular (GLOT) in environmental analysis

International Nuclear Information System (INIS)

Bruner, F.; Lattanzi, L.; Borghesi, P.

1996-01-01

Recently it has been developed a series of new capillary columns characterised by the use of graphitized carbon black modified from different amount of liquid phase. The characteristics of these columns, called graphite layer open tubular (GLOT), are described together with their application to the environmental analysis. A specific application of GLOT columns is for the direct analysis of aqueous solutions avoiding solvent extraction procedure. A comparison between a GLOT column and a traditional capillary column, estimating their behaviour after repeated direct injections of aqueous solution sample is written. Some applications regarding the analysis of the atmosphere pollutants, as aliphatic and aromatic hydrocarbons, and their compounds are written too

Research characteristics and status on Environmental Psychology: a bibliometric and knowledge mapping analysis

Science.gov (United States)

Xu, Jun Hua; Zhu, Lei Ye; Wang, Hai Bin

2018-06-01

Environmental psychology is an interdisciplinary field that focuses on the interplay between individuals and their built and natural environments. Great progress has been made in the areas of environmental psychology by researchers form many countries. However, a thorough quantitative analysis to the emergent research trends and topics has not been found. To reveal the research characteristics and status on Environmental Psychology, 853 related papers from Web of Science core collection were analysed by CiteSpace II. The results show that: (1) the domain of Environmental Psychology was started in 1960s and showed a low growth over the past half century, which reaches a historical peak in 2017. Gifford, USA and the Journal of Environmental Psychology top the list of contributing authors, country and publication respectively. (2) "Environmental Psychology" is the most frequently keywords and has the longest span of the bursts. "ambient scent", "recycling", "children as outsiders" and "ambient temperature" are the top four largest clusters, which are the popular research topics in the domain of environmental psychology.

Analysis and assessment of environmental impacts of small hydro power plant in Slovakia

Science.gov (United States)

Zeleňáková, M.; Fijko, R.; Remeňáková, I.

2017-10-01

Environmental impact assessment (EIA) is an important process that, prior to approval of the investment plan, can provide a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to apply a specific methodology for the analysis and evaluation of the environmental impacts of selected constructions, namely, small hydro power plant, using matrix of impacts. This analysis method is intended not only to increase the clarity and precision of the evaluation process, but also to align it with the requirements of the environmental impact assessment system. This modification should improve the reliability of the environmental impact assessment, and could moreover also be applied to other infrastructure projects. Comparison of alternatives and designation of the optimal variant are implemented based on selected criteria that objectively describe the characteristic lines of the planned alternatives of activity and their impact on the environment. The use of proper EIA procedures can help the decision-makers to formulate proper activities based on qualified decisions. The designed project in Spišské Bystré, Slovakia is used as a case study to clarify and exemplify the methodology and techniques.

Environmental contaminants in food. Volume II-Part B: Working papers

International Nuclear Information System (INIS)

1980-01-01

This volume contains working papers written for Office of Technology Assessment (OTA) to assist in preparation of the report Environmental Contaminants in Food. The contents include: (1) Toxic substances in food information systems: design and management; (2) Assessment of carcinogenic risks from PCBs in food; (3) Economic analysis of alternative action levels in the regulation of environmental contaminants in food; (4) Analysis of foods for radioactivity; (5) Approaches to monitoring environmental contaminants in food; (6) Analytical systems for the determination of metals in food and water supplies; (7) Assessment of methods for regulating 'unavoidable' contaminants in the food supply; and (8) Consumer risk from environmental contaminants in food

Environmental analysis of geopressured-geothermal prospect areas, Brazoria and Kenedy Counties, Texas

Energy Technology Data Exchange (ETDEWEB)

White, W.A.; McGraw, M.; Gustavson, T.C.

1978-01-01

Preliminary environmental data, including current land use, substrate lithology, soils, natural hazards, water resources, biological assemblages, meteorological data, and regulatory considerations have been collected and analyzed for approximately 150 km/sup 2/ of land: (1) near Chocolate Bayou, Brazoria County, Texas, where a geopressured-geothermal test well was drilled in 1978, and (2) near the rural community of Armstrong, Kenedy County, Texas, where future geopressured-geothermal test well development may occur. The study was designed to establish an environmental data base and to determine, within spatial constraints set by subsurface reservoir conditions, environmentally suitable sites for geopressured-geothermal wells.

Risk assessment and optimization (ALARA) analysis for the environmental remediation of Brookhaven National Laboratory`s hazardous waste management facility

Energy Technology Data Exchange (ETDEWEB)

Dionne, B.J.; Morris, S. III; Baum, J.W. [and others

1998-03-01

The Department of Energy`s (DOE) Office of Environment, Safety, and Health (EH) sought examples of risk-based approaches to environmental restoration to include in their guidance for DOE nuclear facilities. Extensive measurements of radiological contamination in soil and ground water have been made at Brookhaven National Laboratory`s Hazardous Waste Management Facility (HWMF) as part of a Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) remediation process. This provided an ideal opportunity for a case study. This report provides a risk assessment and an {open_quotes}As Low as Reasonably Achievable{close_quotes} (ALARA) analysis for use at other DOE nuclear facilities as an example of a risk-based decision technique.

Remotely Sensed Data for High Resolution Agro-Environmental Policy Analysis

Science.gov (United States)

Welle, Paul

Policy analyses of agricultural and environmental systems are often limited due to data constraints. Measurement campaigns can be costly, especially when the area of interest includes oceans, forests, agricultural regions or other dispersed spatial domains. Satellite based remote sensing offers a way to increase the spatial and temporal resolution of policy analysis concerning these systems. However, there are key limitations to the implementation of satellite data. Uncertainty in data derived from remote-sensing can be significant, and traditional methods of policy analysis for managing uncertainty on large datasets can be computationally expensive. Moreover, while satellite data can increasingly offer estimates of some parameters such as weather or crop use, other information regarding demographic or economic data is unlikely to be estimated using these techniques. Managing these challenges in practical policy analysis remains a challenge. In this dissertation, I conduct five case studies which rely heavily on data sourced from orbital sensors. First, I assess the magnitude of climate and anthropogenic stress on coral reef ecosystems. Second, I conduct an impact assessment of soil salinity on California agriculture. Third, I measure the propensity of growers to adapt their cropping practices to soil salinization in agriculture. Fourth, I analyze whether small-scale desalination units could be applied on farms in California in order mitigate the effects of drought and salinization as well as prevent agricultural drainage from entering vulnerable ecosystems. And fifth, I assess the feasibility of satellite-based remote sensing for salinity measurement at global scale. Through these case studies, I confront both the challenges and benefits associated with implementing satellite based-remote sensing for improved policy analysis.

Performance Test of Alpha Spectrometry for Environmental Radioactivity Analysis

International Nuclear Information System (INIS)

Choi, Jung Youn; Yoon, Jong-Ho; Han, Ki-Tek; Ahn, Gil Hoon

2015-01-01

Environmental samples are analyzed by various methods such as, ICP-MS (inductively coupled plasma mass spectrometry), AMS (accelerator mass spectrometry) TIMS (thermal ionization mass spectrometry), HRGS (high resolution gamma spectrometry) and alpha /beta particle analysis. In this study, we will described the result of performance test using alpha spectrometry for analyzing environmental samples. Measurement data of the U activity using SRM based on extraction chromatography with UTEVA resin. It should be effective way to separate of uranium isotope for the measurement of alpha spectrometry. But, the result of this measurement data is higher than another recovery data. Also concentration of U data is lack of consistency. We leave out of consideration many effect of factors about influence in the experiment process. In the future work, we will try to reduce the step of experiment process and reflect the uncertainty factors

A Bottom-up Approach to Environmental Cost-Benefit Analysis

DEFF Research Database (Denmark)

Carolus, Johannes Friedrich; Hanley, Nick; Olsen, Søren Bøye

with the underlying environmental problem, and then assesses costs and benefits of various strategies and solutions suggested by local and directly affected stakeholders. For empirical case studies concerning two river catchments in Sweden and Latvia, the bottom-up CBA approach utilises local knowledge, assesses......Cost-Benefit Analysis is a method to assess the effects of policies and projects on social welfare. CBAs are usually applied in a top-down approach, in the sense that a decision-making body first decides on which policies or projects are to be considered, and then applies a set of uniform criteria...... plans which are not only developed for local conditions but are also likely to be more acceptable to local society, and sheds additional light on possible distributional effects. By not only benefitting from, but also supporting participative environmental planning, bottom-up CBA is in line...

Bibliometric analysis of global environmental assessment research in a 20-year period

Energy Technology Data Exchange (ETDEWEB)

Li, Wei, E-mail: weili@bnu.edu.cn; Zhao, Yang

2015-01-15

Based on the samples of 113,468 publications on environmental assessment (EA) from the past 20 years, we used a bibliometric analysis to study the literature in terms of trends of growth, subject categories and journals, international collaboration, geographic distribution of publications, and scientific research issues. By applying thresholds to network centralities, a core group of countries can be distinguished as part of the international collaboration network. A frequently used keywords analysis found that the priority in assessment would gradually change from project environmental impact assessment (EIA) to strategic environmental assessment (SEA). Decision-theoretic approaches (i.e., environmental indicator selection, life cycle assessment, etc.), along with new technologies and methods (i.e., the geographic information system and modeling) have been widely applied in the EA research field over the past 20 years. Hot spots such as “biodiversity” and “climate change” have been emphasized in current EA research, a trend that will likely continue in the future. The h-index has been used to evaluate the research quality among countries all over the world, while the improvement of developing countries' EA systems is becoming a popular research topic. Our study reveals patterns in scientific outputs and academic collaborations and serves as an alternative and innovative way of revealing global research trends in the EA research field.

Bibliometric analysis of global environmental assessment research in a 20-year period

International Nuclear Information System (INIS)

Li, Wei; Zhao, Yang

2015-01-01

Based on the samples of 113,468 publications on environmental assessment (EA) from the past 20 years, we used a bibliometric analysis to study the literature in terms of trends of growth, subject categories and journals, international collaboration, geographic distribution of publications, and scientific research issues. By applying thresholds to network centralities, a core group of countries can be distinguished as part of the international collaboration network. A frequently used keywords analysis found that the priority in assessment would gradually change from project environmental impact assessment (EIA) to strategic environmental assessment (SEA). Decision-theoretic approaches (i.e., environmental indicator selection, life cycle assessment, etc.), along with new technologies and methods (i.e., the geographic information system and modeling) have been widely applied in the EA research field over the past 20 years. Hot spots such as “biodiversity” and “climate change” have been emphasized in current EA research, a trend that will likely continue in the future. The h-index has been used to evaluate the research quality among countries all over the world, while the improvement of developing countries' EA systems is becoming a popular research topic. Our study reveals patterns in scientific outputs and academic collaborations and serves as an alternative and innovative way of revealing global research trends in the EA research field

Meta-analysis of institutional-economic factors explaining the environmental performance of payments for watershed services

NARCIS (Netherlands)

Brouwer, R.; Tesfaye, A.; Pauw, W.P.

2011-01-01

Payments for ecosystem services (PES) are a relatively new economic policy instrument, and the factors that drive and explain their environmental performance are poorly understood. Here a meta-analysis of causal relationships between the institutional design and environmental performance of 47

META-ANALYSIS OF THE LIFE STYLE FACTORS RELEVANT TO ENVIRONMENTAL HAZARDS FOR THE AGING POPULATION

Science.gov (United States)

The goal of this U.S. Environmental Protection Agency (EPA) study is to characterize activity patterns, physiological changes, and environmental exposures for the aging population. Meta analysis was performed on more than 2000 reviewed articles to evaluate the lifestyle factors ...

Environmental system analysis of waste management. Experiences from applications of the ORWARE model

Energy Technology Data Exchange (ETDEWEB)

Bjoerklund, Anna

2000-11-01

Waste management has gone through a history of shifting problems, demands, and strategies over the years. In contrast to the long prevailing view that the problem could be solved by hiding or moving it, waste is now viewed as a problem ranging from local to global concern, and as being an integral part of several sectors in society. Decisive for this view has been society's increasing complexity and thus the increasing complexity of waste, together with a general development of environmental consciousness, moving from local focus on point emission sources, to regional and global issues of more complex nature. This thesis is about the development and application ORWARE; a model for computer aided environmental systems analysis of municipal waste management. Its origin is the hypothesis that widened perspectives are needed in waste management decision-making to avoid severe sub-optimisation of environmental performance. With a strong foundation in life cycle assessment (LCA), ORWARE aims to cover the environmental impacts over the entire life cycle of waste management. It also performs substance flow analysis (SFA) calculations at a rather detailed level of the system. Applying ORWARE has confirmed the importance of applying systems perspective and of taking into account site specific differences in analysis and planning of waste management, rather than relying on overly simplified solutions. Some findings can be generalised and used as guidelines to reduce environmental impact of waste management. Recovery of material and energy resources from waste generally leads to net reductions in energy use and environmental impact, because of the savings this brings about in other sectors. Waste treatment with low rate of energy and materials recovery should therefore be avoided. The exact choice of technology however depends on what products can be recovered and how they are used. Despite the complexity of the model and a certain degree of user unfriendliness, involved

Hanford Environmental Information System (HEIS)

International Nuclear Information System (INIS)

1994-01-01

The purpose of the Biota subject area of the Hanford Environmental Information System (HEIS) is to manage the data collected from samples of plants and animals. This includes both samples taken from the plant or animal or samples related to the plant or animal. Related samples include animal feces and animal habitat. Data stored in the Biota subject area include data about the biota samples taken, analysis results counts from population studies, and species distribution maps

Energy analysis and environmental impacts of microalgal biodiesel in China

International Nuclear Information System (INIS)

Liao Yanfen; Huang Zehao; Ma Xiaoqian

2012-01-01

The entire life cycle of biodiesel produced by microalgal biomasses was evaluated using the method of life cycle assessment (LCA) to identify and quantify the fossil energy requirements and environmental impact loading of the system. The life cycle considers microalgae cultivation, harvesting, drying, oil extraction, anaerobic digestion, oil transportation, esterification, biodiesel transportation and biodiesel combustion. The investigation results show that the fossil energy requirement for the biodiesel production is 0.74 MJ/MJ biodiesel, indicating that 1 MJ of biodiesel requires an input of 0.74 MJ of fossil energy. Accordingly, biodiesel production is feasible as an energy producing process. The environmental impact loading of microalgal biodiesel is 3.69 PET 2010 (Person Equivalents, Targeted, in 2010) and the GWP is 0.16 kg CO 2-eq /MJ biodiesel. The effects of photochemical ozone formation were greatest among all calculated categorization impacts. The fossil energy requirement and GWP in this operation were found to be particularly sensitive to oil content, drying rate and esterification rate. Overall, the results presented herein indicate that the cultivation of microalgae has the potential to produce an environmentally sustainable feedstock for the production of biodiesel. - Highlights: ► Do energy analysis and environmental impacts of algal biodiesel in China. ► GWP and energy consumption are sensitive to lipid content and drying rate. ► Fossil energy consumption for algal biodiesel is 0.74 MJ/MJ. ► Microalgae are an environmentally sustainable feedstock for biodiesel production.