WorldWideScience

Sample records for incipient impregnation procedure

  1. Radiation hardenable impregnating agents for the consolidating conservation of wooden objects

    International Nuclear Information System (INIS)

    Schaudy, R.

    1985-01-01

    Radiation hardenable impregnating agents offer some advantages over the conventional agents. At the author's institution objects up to 110 cm length can be impregnated for conservation. More than 200 monomers and resins have been investigated. The procedure of impregnation is outlined and some kinds of wooden objects conserved in this way listed. (G.W.)

  2. Development of a Rapid Thermoplastic Impregnation Device

    NARCIS (Netherlands)

    Weustink, A.P.D.

    2007-01-01

    A melt impregnation device for rapid thermoplastic impregnation of fiber bundles has been developed through modeling and experiments. The basic principles behind the thermoplastic impregnation process are investigated and the properties needed for a successful thermoplastic impregnation device are

  3. Incipient plasticity in metallic thin films

    NARCIS (Netherlands)

    Soer, W. A.; De Hosson, J. Th. M.; Minor, A. M.; Shan, Z.; Asif, S. A. Syed; Warren, O. L.

    2007-01-01

    The authors have compared the incipient plastic behaviors of Al and Al-Mg thin films during indentation under load control and displacement control. In Al-Mg, solute pinning limits the ability of dislocations to propagate into the crystal and thus substantially affects the appearance of plastic

  4. Incipient motion of gravel and coal beds

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    2Department of Civil Engineering, S R K R Engineering College, Bhimavaram. 534202, India e-mail: sdey@civil.iitkgp.ernet.in. MS received 15 January 2002. Abstract. An experimental study on incipient motion of gravel and coal beds under unidirectional steady-uniform flow is presented. Experiments were carried out in a ...

  5. Novel Cathodes Prepared by Impregnation Procedures

    Energy Technology Data Exchange (ETDEWEB)

    Eduardo Paz

    2006-09-30

    (1) We showed that similar results were obtained when using various LSM precursors to produce LSM-YSZ cathodes. (2) We showed that enhanced performance could be achieved by adding LSCo to LSMYSZ cathodes. (3) We have preliminary results showing that there is a slow deactivation with LSFYSZ cathodes.

  6. Bioactivity and laundering resistance of five commercially available, factory-treated permethrin-impregnated fabrics for the prevention of mosquito-borne diseases: the need for a standardized testing and licensing procedure.

    Science.gov (United States)

    Faulde, Michael K; Pages, Frederic; Uedelhoven, Waltraud

    2016-04-01

    Personal protective measures against hematophagous vectors constitute the first line of defense against arthropod-borne diseases. In this regard, a major advance has been the development of residual insecticides that can be impregnated into clothing. Currently, however, information on specific treatment procedures, initial insecticide concentrations, arthropod toxicity, residual activity, and laundering resistance is either fragmentary or non-existent, and no World Health Organization Pesticides Evaluation Scheme or other guidelines exist for the standardized testing and licensing of insecticide-treated clothing. The aim of this study was to analyze the insecticide content, contact toxicity, laundering resistance, and residual activity of five commercially available and commonly used permethrin-treated fabrics-Insect Shield, ExOfficio, Sol's Monarch T-shirts, battle dress uniforms (BDUs), and Labonal socks-against vector-competent Aedes aegypti, Anopheles stephensi, and Culex pipiens mosquitoes under laboratory conditions. Prior to laundering, permethrin concentrations ranged from 4300 to 870 mg/m(2) whereas, after 100 defined machine launderings, the remaining permethrin content fell to between 1800 and 20 mg/m(2), a percentage permethrin loss of 58.1 to 98.5 %. The highest 99 % knockdown (KD99) efficacy of permethrin was detected in Ae. aegypti, followed by An. stephensi and Cx. pipiens demonstrating that Ae. aegypti is the most sensitive species and Cx. pipiens the least sensitive. After 100 launderings, the remaining biocidal efficacy differed markedly among the five brands, with KD99 times varying from 38.8 ± 2.9 to >360 min for Ae. aegypti, from 44 ± 3.5 to >360 min for An. stephensi, and from 98 ± 10.6 to >360 min for Cx. pipiens. Overall, the ranking of the residual biocidal efficacies within the five brands tested was as follows: BDU ≈ Labonal > Sol's Monarch > ExOfficio > Insect Shield. When applying German Armed Forces

  7. Platinum incorporation in the Na Y zeolite through impregnation method, and characterization by XRD, FTIR and nitrogen adsorption

    International Nuclear Information System (INIS)

    Araujo, A.S.; Sousa, B.V.; Andrade, A.C.C.; Rodrigues, M.G.F.; Rangel, M.C.

    2007-01-01

    Supported metal catalysts are widely used in petroleum refining, chemical and petroleum industries. These catalysts are important in ammonia synthesis, conversion of hydrocarbons with water vapor to synthesis gas, reforming, hydrocracking, ... Platinum has long been used in cracking, hydrogenation and dehydrogenation processes. The aim of this project is the Na Y zeolitic sample preparation through impregnation for incipient humidity, with 0,5% concentration of platinum, aiming its use as a catalyst in the steam reforming reaction. The characterization techniques used were: X Rays Diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR) and Nitrogen Adsorption (BET Method). From the obtained results through the techniques mentioned previously it is possible to evidence that the platinum impregnation process did not change the Na Y zeolite structure. Through the superficial specific area (BET) it was possible to observe that the platinum impregnation process caused a decrease in the specific area due to the reduction to the accessibility to the micropores of the zeolitic structure. (author)

  8. Characteristics of scandate-impregnated cathodes with sub-micron scandia-doped matrices

    International Nuclear Information System (INIS)

    Yuan Haiqing; Gu Xin; Pan Kexin; Wang Yiman; Liu Wei; Zhang Ke; Wang Jinshu; Zhou Meiling; Li Ji

    2005-01-01

    We describe in this paper scandate-impregnated cathodes with sub-micron scandia-doped tungsten matrices having an improved uniformity of the Sc distribution. The scandia-doped tungsten powders were made by both liquid-solid doping and liquid-liquid doping methods on the basis of previous research. By improving pressing, sintering and impregnating procedures, we have obtained scandate-impregnated cathodes with a good uniformity of the Sc 2 O 3 - distribution. The porosity of the sub-micron structure matrix and content of impregnants inside the matrix are similar to those of conventionally impregnated cathodes. Space charge limited current densities of more than 30 A/cm 2 at 850 deg. C b have been obtained in a reproducible way. The current density continuously increases during the first 2000 h life test at 950 deg. C b with a dc load of 2 A/cm 2 and are stable for at least 3000 h

  9. The link between Movability Number and Incipient Motion in river ...

    African Journals Online (AJOL)

    This allowed for a firmer definition of Incipient Motion as well as a new bedload transportation equation. Additional laboratory experimentation for Particle Reynolds number over the range 0.12-486 facilitated the improved prediction of Incipient Motion from a plot of the critical Movability Number vs. Particle Reynolds number ...

  10. The course of incipient diabetic nephropathy

    DEFF Research Database (Denmark)

    Christensen, Cramer; Mogensen, C E

    1985-01-01

    (incipient diabetic nephropathy) were studied. For comparison 18 normals, 23 diabetics with normal albumin excretion and 10 patients with overt nephropathy were also examined. Diastolic blood pressure (DBP) was elevated to 88 +/- 9 mmHg (mean +/- S.D.) compared to patients with normal urinary albumin...... excretion: 80 +/- 7 (S.D.) (2p = 0.13%) but was below pressures in patients with overt diabetic nephropathy 109 +/- 15 (2p = 0.002%). Glomerular filtration rate (GFR) was elevated to 142 +/- 21 ml/min (mean +/- S.D.) compared to 132 +/- 9 in patients with normal urinary albumin excretion (2p = 4.3%). Renal......With the aim of defining the transitional phase from normal or near normal albumin excretion to overt diabetic nephropathy, 23 male diabetics of more than 7 years' duration, below 40 years of age and a baseline urinary albumin excretion above 15 micrograms/min but without clinical proteinuria...

  11. Oil-Impregnated Polyethylene Films

    Science.gov (United States)

    Mukherjee, Ranit; Habibi, Mohammad; Rashed, Ziad; Berbert, Otacilio; Shi, Shawn; Boreyko, Jonathan

    2017-11-01

    Slippery liquid-infused porous surfaces (SLIPS) minimize the contact angle hysteresis of a wide range of liquids and aqueous food products. Although hydrophobic polymers are often used as the porous substrate for SLIPS, the choice of polymer has been limited to silicone-based or fluorine-based materials. Hydrocarbon-based polymers, such as polyethylene, are cost effective and widely used in food packaging applications where SLIPS would be highly desirable. However, to date there have been no reports on using polyethylene as a SLIPS substrate, as it is considered highly impermeable. Here, we show that thin films of low-density polyethylene can be stably impregnated with carbon-based oils without requiring any surface modification. Wicking tests reveal that oils with sufficient chemical compatibility follow Washburn's equation. The nanometric effective pore size of the polyethylene does result in a very low wicking speed, but by using micro-thin films and a drawdown coater, impregnation can still be completed in under one second. The oil-impregnated polyethylene films promoted ultra-slippery behavior for water, ketchup, and yogurt while remaining durable even after being submerged in ketchup for over one month. This work was supported by Bemis North America (AT-23981).

  12. Polymer-filled microcontainers for oral delivery loaded using supercritical impregnation

    DEFF Research Database (Denmark)

    Marizza, Paolo; Keller, Stephan Sylvest; Müllertz, Anette

    2014-01-01

    procedures. This work proposes an effective loading technique for a poorly soluble model drug in microcontainers, by combining inkjet printing and supercritical fluid impregnation. Well defined quantities of poly(vinyl pyrrolidone) (PVP) solutions are dispensed into microcontainers by inkjet printing...... with a quasi-no-waste performance. Then ketoprofen is impregnated in the polymer matrix by using supercritical carbon dioxide (scCO2) as loading medium. The amount of polymer is controlled by the volume and the number of droplets of dispensed polymer and drug loading is tuned by varying the impregnation...

  13. Flexible Phenolic Impregnated Felt, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — During this program Fiber Materials, Inc. (FMI) will develop innovative yet practical methods for preparing Phenolic Impregnated Felt (PIF) materials for thermal...

  14. Preparation of Palladium-Impregnated Ceria by Metal Complex Decomposition for Methane Steam Reforming Catalysis

    Directory of Open Access Journals (Sweden)

    Worawat Wattanathana

    2017-01-01

    Full Text Available Palladium-impregnated ceria materials were successfully prepared via an integrated procedure between a metal complex decomposition method and a microwave-assisted wetness impregnation. Firstly, ceria (CeO2 powders were synthesized by thermal decomposition of cerium(III complexes prepared by using cerium(III nitrate or cerium(III chloride as a metal source to form a metal complex precursor with triethanolamine or benzoxazine dimer as an organic ligand. Palladium(II nitrate was consequently introduced to the preformed ceria materials using wetness impregnation while applying microwave irradiation to assist dispersion of the dopant. The palladium-impregnated ceria materials were obtained by calcination under reduced atmosphere of 10% H2 in He stream at 700°C for 2 h. Characterization of the palladium-impregnated ceria materials reveals the influences of the metal complex precursors on the properties of the obtained materials. Interestingly, the palladium-impregnated ceria prepared from the cerium(III-benzoxazine dimer complex revealed significantly higher BET specific surface area and higher content of the more active Pdδ+ (δ > 2 species than the materials prepared from cerium(III-triethanolamine complexes. Consequently, it exhibited the most efficient catalytic activity in the methane steam reforming reaction. By optimization of the metal complex precursors, characteristics of the obtained palladium-impregnated ceria catalysts can be modified and hence influence the catalytic activity.

  15. Preparation of iron-impregnated granular activated carbon for arsenic removal from drinking water

    International Nuclear Information System (INIS)

    Chang Qigang; Lin Wei; Ying Weichi

    2010-01-01

    Granular activated carbon (GAC) was impregnated with iron through a new multi-step procedure using ferrous chloride as the precursor for removing arsenic from drinking water. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) analysis demonstrated that the impregnated iron was distributed evenly on the internal surface of the GAC. Impregnated iron formed nano-size particles, and existed in both crystalline (akaganeite) and amorphous iron forms. Iron-impregnated GACs (Fe-GACs) were treated with sodium hydroxide to stabilize iron in GAC and impregnated iron was found very stable at the common pH range in water treatments. Synthetic arsenate-contaminated drinking water was used in isotherm tests to evaluate arsenic adsorption capacities and iron use efficiencies of Fe-GACs with iron contents ranging from 1.64% to 12.13% (by weight). Nonlinear regression was used to obtain unbiased estimates of Langmuir model parameters. The arsenic adsorption capacity of Fe-GAC increased significantly with impregnated iron up to 4.22% and then decreased with more impregnated iron. Fe-GACs synthesized in this study exhibited higher affinity for arsenate as compared with references in literature and shows great potential for real implementations.

  16. Current Signature Analysis as Diagnosis Media for Incipient Fault Detection

    Directory of Open Access Journals (Sweden)

    MIHET-POPA, L.

    2007-11-01

    Full Text Available This paper focuses on the experimental investigation for incipient fault detection and fault detection methods existing in the literature, using Wound Rotor Induction Machine (WRIM. Three main experiments (one for stator phase unbalance, one for rotor phase unbalance and one for turn-to-turn faults have been performed to study the electrical behavior of the WRIM. The article aims to provide further documentation for an advanced condition monitoring system, in order to avoid undesirable operating conditions and to detect and diagnose incipient electrical faults. A description of the measurement system and experimental investigation are presented and stator and rotor currents spectrum of the WRIM are analyzed.

  17. The link between Movability Number and Incipient Motion in river ...

    African Journals Online (AJOL)

    2009-06-05

    Jun 5, 2009 ... The concept of incipient motion has been of continuing interest to researchers and engineers working with sediment move- ...... pipe laws. J. Inst. Civ. Eng. 11 133-156. EINSTEIN HA (1942) Formulas for the transportation of bed load. Trans. ASCE 107 575-577. EINSTEIN HA (1950) The Bed Load Function ...

  18. Three feasible strategies to minimize kidney injury in 'incipient AKI'.

    Science.gov (United States)

    Perazella, Mark A; Coca, Steven G

    2013-08-01

    Acute kidney injury (AKI) is common and increasing in hospitalized patients. The earlier recognition of renal injury, at a stage described as 'incipient AKI', may allow renoprotective strategies to be initiated at a time when more kidney tissue is salvageable. 'Incipient AKI' represents renal injury as manifested by new-onset proteinuria, cellular activity on urine microscopy, or elevated novel biomarkers of kidney injury in the absence of clinical data that meet current diagnostic criteria for AKI. We propose three strategies to preserve kidney function and minimize further kidney injury in patients with 'incipient AKI'. These include--when appropriate for the prevailing cause of 'incipient AKI'--use of low-chloride-containing intravenous solutions, continued use of renin-angiotensin system antagonists, and use of diuretics to achieve adequate control of intravascular volume. The combined approach of the early diagnosis of AKI and early employment of feasible therapeutic strategies may slow the growth of clinical AKI, AKI requiring renal replacement therapy and chronic kidney disease, and might reduce AKI-associated mortality.

  19. Developing countries and incipient industrialization: a case study of ...

    African Journals Online (AJOL)

    Botswana's small and large towns offer good examples of incipient industrialization and enterprise clustering in a developing economy. Using data from Lobatse, a small industrial centre in Botswana, this brief paper shows that clustering in developing countries does not necessarily induce high inter-firm relationships as is ...

  20. Incipient sexual isolation in the nasuta-albomicans complex of ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Biosciences; Volume 26; Issue 3. Incipient sexual isolation in the nasuta-albomicans complex of Drosophila: mating preference in male-, female– and multiple-choice mating experiments. M T Tanuja N B Ramachandra H A Ranganath. Articles Volume 26 Issue 3 September 2001 pp 365-371 ...

  1. Removal of bromide from surface waters using silver impregnated activated carbon.

    Science.gov (United States)

    Chen, Chen; Apul, Onur Guven; Karanfil, Tanju

    2017-04-15

    The main objectives of this study were to develop an understanding of silver impregnated activated carbon (SIAC) preparation for enhanced bromide (Br - ) removal from water, and to investigate the impact of aqueous background composition on the Br - removal. Several SIACs were produced using various combinations of oxidation and silver impregnation procedures and powdered activated carbons (ACs). Regardless of the preparation procedure, SIACs showed significantly Br - uptakes than the virgin ACs. The Br - removal efficiency was affected by (i) the background water composition (e.g. Cl - and NOM competition reduced the Br - uptake), (ii) silver impregnation process (e.g. silver content, pre-oxidation of virgin AC; silver impregnation largely increased the Br - removal, and the pre-oxidation of AC prior to silver impregnation was found to be important), and (iii) AC characteristics (e.g. surface area, oxygen content; SIACs with higher silver contents and larger surface areas exhibited higher degrees of Br - removal). The Br - removal by SIAC reduced the formation of brominated THMs. Jar test results showed that coagulation did not have an impact on Br - removal by SIAC. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Impregnation of Composite Materials: a Numerical Study

    Science.gov (United States)

    Baché, Elliott; Dupleix-Couderc, Chloé; Arquis, Eric; Berdoyes, Isabelle

    2017-12-01

    Oxide ceramic matrix composites are currently being developed for aerospace applications such as the exhaust, where the parts are subject to moderately high temperatures (≈ 700 ∘C) and oxidation. These composite materials are normally formed by, among other steps, impregnating a ceramic fabric with a slurry of ceramic particles. This impregnation process can be complex, with voids possibly forming in the fabric depending on the process parameters and material properties. Unwanted voids or macroporosity within the fabric can decrease the mechanical properties of the parts. In order to design an efficient manufacturing process able to impregnate the fabric well, numerical simulations may be used to design the process as well as the slurry. In this context, a tool is created for modeling different processes. Thétis, which solves the Navier-Stokes-Darcy-Brinkman equation using finite volumes, is expanded to take into account capillary pressures on the mesoscale. This formulation allows for more representativity than for Darcy's law (homogeneous preform) simulations while avoiding the prohibitive simulation times of a full discretization for the composing fibers at the representative elementary volume scale. The resulting tool is first used to investigate the effect of varying the slurry parameters on impregnation evolution. Two different processes, open bath impregnation and wet lay-up, are then studied with emphasis on varying their input parameters (e.g. inlet velocity).

  3. Impregnation of leather during "freeze-drying"

    DEFF Research Database (Denmark)

    Storch, Mikkel; Vestergaard Poulsen Sommer, Dorte; Hovmand, Ida

    2016-01-01

    Freeze-drying is a recognized method for the preservation of waterlogged objects. Naturally, freeze-drying has also been used for waterlogged archaeological leather often after treatment with Na2.EDTA and impregnation with PEG; but the treated leather sometimes suffers from “excessive drying......” becoming too stiff and brittle. The aim of this study was to examine the effect of a conventional freeze-drying method against an alternative freeze-drying method that preserves the natural moisture content of the leather. Both new and archaeological waterlogged leather were included in the study...... suggest that the process which takes place within the leather during the freeze-drying in not actual freeze-drying, but rather a sophisticated way of distributing the impregnating agent. The pure ice phase freezes out, but the impregnating agent remains liquid as the temperature does not become low enough...

  4. Fiber-reinforced ceramics for thermostructural applications, produced by polymer impregnation pyrolysis

    OpenAIRE

    Mingazzini, Claudio

    2014-01-01

    Several CFCC (Continuous Fiber Composite Ceramics) production processes were tested, concluding that PIP (Polymer Impregnation, or Infiltration, Pyrolysis) and CBC (Chemically Bonded Ceramics) based procedures have interesting potential applications in the construction and transportation fields, thanks to low costs to get potentially useful thermomechanical performances. Among the different processes considered during the Doctorate (from the synthesis of new preceramic polymers, to the PIP...

  5. Drug smuggling using clothing impregnated with cocaine.

    Science.gov (United States)

    McDermott, Seán D; Power, John D

    2005-11-01

    A case study is presented where a woman travelling from South America to the Republic of Ireland was detained at Dublin Airport and articles of clothing she had in her luggage were found to be impregnated with cocaine. The study shows that the amount of powder recovered from the garments was approximately 14% of the total weight of the garments. The cocaine was in the form of cocaine hydrochloride and the purity was approximately 80%. An examination of the garments under filtered light highlighted the areas exposed to cocaine and indicated that the method of impregnation was by pouring liquid containing cocaine onto the clothing.

  6. Incipient Movement : designing the seamless and the scaleless

    DEFF Research Database (Denmark)

    Brabrand, Helle

    2012-01-01

    -space-presentations, confronting the actual time-space-depth of a viewer/player with virtual time-space-depth of transformation and deformation of drawing. Architectonic space limits and orients body movement. Conversely, architecture has the potential of setting free and expanding kinesthetic feeling-out in space. This twist......My project Incipient Movement relates seamless and scaleless parameters directly to the drawing of body-space. The project operates with a kind of topological sensing and taking form, by setting up series of relations between simple tectonic forces and forces of movement. The work twists body...... between oriented movement and movement in its incipiency is a basic dimension of architectural experience and related to dimensions in dance. Nevertheless these twists of movement-forces are rather neglected as architectonic design parameters....

  7. Software System for Finding the Incipient Faults in Power Transformers

    Directory of Open Access Journals (Sweden)

    Nikolina Petkova

    2015-05-01

    Full Text Available In this paper a new software system for finding of incipient faultsis presented.An experiment is made with real measurement of partial discharge(PD that appeared in power transformer. The software system usesacquisition data to define the real state of this transformer. One of the most important criteria for the power transformer’s state is the presence of partial discharges. The wave propagation caused by partial discharge depends on scheme of the winding and construction of the power equipment. In all cases, the PD source had a specific position so the wave measured from the PD –coupling device had a specific waveform. The waveform is different when PDcoupling device is put on a specific place. The waveform and the time of propagation are criteria for the localization of the source of incipient faults in the volume of power transformer.

  8. Combustion properties of wood impregnated with commercial ...

    African Journals Online (AJOL)

    The objective of this study was to determine some combustion properties of Calabrian pine (Pinus brutia Ten.) wood specimens impregnated with aqueous solutions of commercial fertilizers. Ammonium sulphate (AS) and diammonium phosphate (DAP) were used as commercial fertilizers. Diammonium phosphate and ...

  9. Titanium impregnated borosilicate zeolites for epoxidation catalysis

    Czech Academy of Sciences Publication Activity Database

    Přech, Jan; Vitvarová, Dana; Lupínková, Lenka; Kubů, Martin; Čejka, Jiří

    2015-01-01

    Roč. 212, AUG 2015 (2015), s. 28-34 ISSN 1387-1811 R&D Projects: GA ČR GAP106/11/0819 Institutional support: RVO:61388955 Keywords : borosilicate * titanium impregnation * epoxidation Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.349, year: 2015

  10. Incipient fault detection and power system protection for spaceborne systems

    Science.gov (United States)

    Russell, B. Don; Hackler, Irene M.

    1987-01-01

    A program was initiated to study the feasibility of using advanced terrestrial power system protection techniques for spacecraft power systems. It was designed to enhance and automate spacecraft power distribution systems in the areas of safety, reliability and maintenance. The proposed power management/distribution system is described as well as security assessment and control, incipient and low current fault detection, and the proposed spaceborne protection system. It is noted that the intelligent remote power controller permits the implementation of digital relaying algorithms with both adaptive and programmable characteristics.

  11. Incipient cognition solves the spatial reciprocity conundrum of cooperation.

    Directory of Open Access Journals (Sweden)

    Jeromos Vukov

    Full Text Available BACKGROUND: From the simplest living organisms to human societies, cooperation among individuals emerges as a paradox difficult to explain and describe mathematically, although very often observed in reality. Evolutionary game theory offers an excellent toolbar to investigate this issue. Spatial structure has been one of the first mechanisms promoting cooperation; however, alone it only opens a narrow window of viability. METHODOLOGY/PRINCIPAL FINDINGS: Here we equip individuals with incipient cognitive abilities, and investigate the evolution of cooperation in a spatial world where retaliation, forgiveness, treason and mutualism may coexist, as individuals engage in Prisoner's Dilemma games. In the model, individuals are able to distinguish their partners and act towards them based on previous interactions. We show how the simplest level of cognition, alone, can lead to the emergence of cooperation. CONCLUSIONS/SIGNIFICANCE: Despite the incipient nature of the individuals' cognitive abilities, cooperation emerges for unprecedented values of the temptation to cheat, being also robust to invasion by cheaters, errors in decision making and inaccuracy of imitation, features akin to many species, including humans.

  12. Controlling incipient oxidation of pyrite for improved rejection. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, R.H.; Richardson, P.E.; Tao, D.P.

    1996-04-01

    It is well known that superficial oxidation of pyrite produces a hydrophobic sulfur-rich surface and creates problems in separating the mineral from coal using surface-based processes such as flotation and agglomeration. Numerous studies of pyrite oxidation have been conducted but most of them were concerned with the advanced stages of oxidation, and as a result it was not possible to establish a relationship between oxidation and flotation behavior. A better understanding of the mechanisms and kinetics of the incipient oxidation reactions, which may vary with the origin, morphology, texture, and solid state properties of pyrite, can lead to the development of new processes that can improve pyrite rejection from coal. This project is aimed at better understanding of the mechanisms involved during the initial stages of pyrite oxidation to foster the development of advanced coal cleaning technologies. Studies were conducted by fracturing pyrite electrodes in-situ in an electrochemical cell to create virgin surfaces. Electrochemical and photoelectrochemical techniques were employed to characterize the incipient oxidation of pyrite in aqueous solutions. Microflotation tests were conducted to obtain information on the hydrophobicity of pyrite under controlled E{sub h} and pH conditions, and the results were correlated with electrochemical studies.

  13. Study on Leaching of Copper Nanoparticles in Combined Impregnation- Densification Treatments of wood after Accelerated Aging

    Directory of Open Access Journals (Sweden)

    Aisona Talaei

    2015-05-01

    Full Text Available This study was performed to evaluate the leaching rate of copper nanoparticles in combined impregnation-densification treated poplar and spruce wood after accelerated aging. Specimens were prepared by impregnation with 200 and 400 ppm nano-copper suspensions, followed by pre-steam treatment and densification. Impregnation was done in a sealed vessel with 4 bar pressure in 20 minutes. Half of the specimens were oven-dried and steamed at 150°C for 2 hours and immediately densified under the hot press at 170°C for 3 hours to reach to the 33% compression rate. All specimens were exposed to the 6 steps accelerated aging procedure according to ASTM D-1037. Leaching test was performed according to EN84 standard (1997 for a period of 14 days. The leached residues were investigated in the Mineral Exploration and Geological Center by atomic absorption method. Results showed that nano-copper particles in impregnated specimens had no leaching; but the pre-steaming and densification treatments led to leaching the nano-copper particles from the treated wood.

  14. Impregnated charcoal for removing radioactive molecules from gases

    International Nuclear Information System (INIS)

    Underhill, D.W.; Laskie, J.R.

    1984-01-01

    This invention employs charcoal as an adsorbent material to remove radioactive molecules from gas. The charcoal is impregnated with a substituted 1,3-diazabicyclo[2.2.2]octane, wherein the substitutents cause the substituted compound to be a liquid at atmospheric pressure and room temperatures. One preferred impregnant is 2-methyl-1,4-diazabicyclo[2.2.2]octane, which also can be called methyl-triethylene diamine. A preferred way to apply impregnate to charcoal is by spraying the impregnate with a nebulizer using air presssure. The amount of impregnate employed for any given application can vary. In general, amounts between about one percent and about ten percent by weight are considered suitable. Once the impregnated charcoal is loaded into an adsorbent bed, the bed is installed within a gas handling system between a source of radioactive gas and an outlet to the atmosphere

  15. Multilayer Impregnated Fibrous Thermal Insulation Tiles

    Science.gov (United States)

    Tran, Huy K.; Rasky, Daniel J.; Szalai, Christine e.; Hsu, Ming-ta; Carroll, Joseph A.

    2007-01-01

    The term "secondary polymer layered impregnated tile" ("SPLIT") denotes a type of ablative composite-material thermal- insulation tiles having engineered, spatially non-uniform compositions. The term "secondary" refers to the fact that each tile contains at least two polymer layers wherein endothermic reactions absorb considerable amounts of heat, thereby helping to prevent overheating of an underlying structure. These tiles were invented to afford lighter-weight alternatives to the reusable thermal-insulation materials heretofore variously used or considered for use in protecting the space shuttles and other spacecraft from intense atmospheric-entry heating.

  16. Wood construction and magnetic characteristics of impregnated type magnetic wood

    International Nuclear Information System (INIS)

    Oka, Hideo; Hojo, Atsushi; Seki, Kyoushiro; Takashiba, Toshio

    2002-01-01

    The results of experiments involving the AC and DC magnetic characteristics of impregnated type magnetic wood were studied by taking into consideration the wood construction and fiber direction. The experimental results show that the sufficient amount of impregnated magnetic fluid varies depending on the fiber direction and length, and the grain face of the wood material. The impregnated type magnetic wood sample that is fully impregnated by magnetic fluid has a 60% saturation magnetization compared to the saturation magnetization of magnetic fluid. Samples for which the wood fiber direction was the same as the direction of the magnetic path had a higher magnetization intensity and permeability

  17. Comparison of the compressive strength of impregnated and nonimpregnated eucalyptus subjected to two different pressures and impregnation times

    Directory of Open Access Journals (Sweden)

    Waldemir Rodrigues

    2004-06-01

    Full Text Available The durability of wood is affected by several factors. For this reason, much research has been done on a variety of chemical compounds for impregnating wood, aimed at preserving it while simultaneously improving its properties. Recent studies of the properties of impregnated wood have demonstrated the possibility of substantially improving its mechanical characteristics. Thus, the purpose of this work was to compare the strength to parallel compression of wooden fibers (Eucalyptus grandis, both nonimpregnated and impregnated with a monocomponent resin, from the standpoint of pressure and impregnation time, aiming at its structural utilization. The results demonstrate that the compressive strength of impregnated test specimens is greater than that of nonimpregnated ones, indicating that monocomponent polyurethane resin can be considered suitable for impregnating wood, since it increases the compressive strength of eucalyptus.

  18. Pre-accident weathering of impregnated carbons for iodine removal

    International Nuclear Information System (INIS)

    Deitz, V.R.

    1981-01-01

    The atmospheric degradation of carbons, measured by increased penetration of methyl iodide-131, is an important factor in the operation and replacement of carbon filters. The commercial carbons are distinguished by three types of impregnations: (1) KI + xI 2 , (2) KI and a tertiary amine, and (3) the tertiary amine alone. A degradation of these carbons has been observed in continuous flows of outdoor air and this degradation has been found to decrease in the sequence (1) to (2) to (3) over exposure times of up to one year. It is concluded that the choice of impregnation formulation in nuclear-grade carbons is an important factor towards high efficiency and long service life. The pattern of air contaminants observed in the above weathering at several locations was subject to considerable fluctuation. The atmospheric conditions, particularly relative humidity and dew point, are important factors when these are in a range in which the relative humidity is above 50%. The seasonal effect has been observed for monthly exposures of KI/sub x/ carbons. Weathering under laboratory conditions suggests that the expected life (24 to 30 months) of the carbon might be realized if only the normal contaminants of the air alone were present. In air flows above 50% RH, and when accidental solvent spills occur, the combined effect with the contaminants accelerates the degradation of the carbons. A determination of iodine-131 penetration is obviously the decisive factor in safety performance. The test results provide a valid indication of the condition of the carbon at the time of the test and if the carbon proves to be unacceptable, the filter system has already operated for a period of time with degraded carbon. It is recommended that some on-line measurement be made that would anticipate a drastic drop in trapping efficiency. A routine in-line chromatographic test procedure with methyl iodide-127 may be one possibility

  19. A measurement-based technique for incipient anomaly detection

    KAUST Repository

    Harrou, Fouzi

    2016-06-13

    Fault detection is essential for safe operation of various engineering systems. Principal component analysis (PCA) has been widely used in monitoring highly correlated process variables. Conventional PCA-based methods, nevertheless, often fail to detect small or incipient faults. In this paper, we develop new PCA-based monitoring charts, combining PCA with multivariate memory control charts, such as the multivariate cumulative sum (MCUSUM) and multivariate exponentially weighted moving average (MEWMA) monitoring schemes. The multivariate control charts with memory are sensitive to small and moderate faults in the process mean, which significantly improves the performance of PCA methods and widen their applicability in practice. Using simulated data, we demonstrate that the proposed PCA-based MEWMA and MCUSUM control charts are more effective in detecting small shifts in the mean of the multivariate process variables, and outperform the conventional PCA-based monitoring charts. © 2015 IEEE.

  20. Impact of impregnation with boron compounds on combustion ...

    African Journals Online (AJOL)

    user

    2011-04-11

    Apr 11, 2011 ... (Feist, 1988). High doses of boron compounds are the preferred method today. Keskin (2007) stated that, considering the interaction of combustion type and impregnation materials, the lowest thermal degradation values were obtained in samples impregnated with Bx and imersol-aqua solutions, containing ...

  1. Synthesis of silver impregnated carbon nanotubes and cyclodextrin ...

    African Journals Online (AJOL)

    Synthesis of silver impregnated carbon nanotubes and cyclodextrin polyurethanes for the disinfection of water. L.P Lukhele, R Krause, B Mamba, M Momba. Abstract. Silver impregnated carbon nanotubes and cyclodextrin polymers were synthesised by first functionalising carbon nanotubes in a mixture of nitric and ...

  2. Effects of impregnation with boron compounds on the surface ...

    African Journals Online (AJOL)

    Liebl.) which met the requirements of ASTM D 358 were impregnated according to ASTM D 1413 with boric acid (Ba) and borax (Bx) by vacuum technique. After impregnation, surfaces were coated with cellulosic, synthetic, polyurathane, water-based, acrylic and acid hardening varnishes in accordance with ASTM D 3023 ...

  3. Impact of impregnation with boron compounds on combustion ...

    African Journals Online (AJOL)

    This study examined the impacts of varnishing after impregnation with boron compounds on combustion properties of oriental beech. The test samples prepared from oriental beech (Fagus orientalis Lipsky) wood were impregnated according to ASTM D 1413–76–99 with boric acid (Ba) or borax (Bx) using a vacuum ...

  4. Resin impregnation of cellulose nanofibril films facilitated by water swelling

    Science.gov (United States)

    Yan Qing; Ronald Sabo; Zhiyong Cai; Yiqiang Wu

    2013-01-01

    Flexible composite films were produced by impregnating aqueous phenol formaldehyde (PF) resin into water-swollen cellulose nanofibril (CNF) films. CNF films were prepared using a pressurized filtration method in combination with freeze drying. The freeze-dried films were swollen with water then impregnated with PF resin by soaking in aqueous resin solutions of varying...

  5. Arsenic Removal using Silver-Impregnated Prosopis spicigera L ...

    African Journals Online (AJOL)

    ADOWIE PERE

    2017-12-02

    Dec 2, 2017 ... ABSTRACT: Silver-impregnated carbon (SIC) and its precursor (un-impregnated) derived from an easily available low cost plant material Prosopis spicigera L. wood (PSLW) carbon was investigated for their ability to remove arsenic from aqueous solutions in batch and column experiments. Arsenic uptake ...

  6. Studies of properties of rubber wood with impregnation of polymer

    Indian Academy of Sciences (India)

    Properties such as dimensional stability, water absorption, hardness, tensile strength, flexural strength, etc of the impregnated wood have been checked and found to be improved by incorporation of GMA as the crosslinker with styrene. The polymer-impregnated wood has also been characterized by FTIR spectroscopy and ...

  7. Impregnation of Ibuprofen into Polycaprolactone using supercritical carbon dioxide

    International Nuclear Information System (INIS)

    Yoganathan, Roshan; Mammucari, Raffaella; Foster, Neil R

    2010-01-01

    Polycaprolactone (PCL) is a Food and Drug Administration (FDA) approved biodegradable polyester used in tissue engineering applications. Ibuprofen is an anti-inflammatory drug which has good solubility in supercritical CO 2 (SCCO 2 ). The solubility of CO 2 in PCL allows for the impregnation of CO 2 -soluble therapeutic agents into the polymer via a supercritical fluid (SCF) process. Polymers impregnated with bio-active compounds are highly desired for medical implants and controlled drug delivery. In this study, the use of CO 2 to impregnate PCL with ibuprofen was investigated. The effect of operating conditions on the impregnation of ibuprofen into PCL was investigated over two pressure and two temperature levels, 150bar and 200bar, 35 0 C and 40 0 C, respectively. Polycaprolactone with drug-loadings as high as 27% w/w were obtained. Impregnated samples exhibited controlled drug release profiles over several days.

  8. Impregnation of Ibuprofen into Polycaprolactone using supercritical carbon dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Yoganathan, Roshan; Mammucari, Raffaella; Foster, Neil R, E-mail: n.foster@unsw.edu.a [Supercritical Fluids Research Group, School of Chemical Sciences and Engineering, University of New South Wales, NSW 2052 (Australia)

    2010-03-01

    Polycaprolactone (PCL) is a Food and Drug Administration (FDA) approved biodegradable polyester used in tissue engineering applications. Ibuprofen is an anti-inflammatory drug which has good solubility in supercritical CO{sub 2} (SCCO{sub 2}). The solubility of CO{sub 2} in PCL allows for the impregnation of CO{sub 2}-soluble therapeutic agents into the polymer via a supercritical fluid (SCF) process. Polymers impregnated with bio-active compounds are highly desired for medical implants and controlled drug delivery. In this study, the use of CO{sub 2} to impregnate PCL with ibuprofen was investigated. The effect of operating conditions on the impregnation of ibuprofen into PCL was investigated over two pressure and two temperature levels, 150bar and 200bar, 35{sup 0}C and 40 {sup 0}C, respectively. Polycaprolactone with drug-loadings as high as 27% w/w were obtained. Impregnated samples exhibited controlled drug release profiles over several days.

  9. Composition of nonflowing impregnating cable mixture

    Energy Technology Data Exchange (ETDEWEB)

    Dimitrov, D.M.; Andreyev, V.G.; Koralski, G.I.; Petkova, N.; Velikova, D.G.

    1979-08-10

    A composition of a nonflowing electrical insulation cable mixture is patented which is based on petroleum oil, colophony, polyolefinic wax, polyethylene and ceresine containing 1-20 percent per mixture of butadiene-styrol latex. Example (parts by weight). Cable impregnating oil has the following composition: colophony 5, petroleum oil 7.7, butadiene-styrol latex 5.0, polyolefin wax 10, low pressure polyethylene 3. In order to obtain a mixture latex is added to petroleum oil heated to 80 degrees, the mixture is heated to 110 degrees, and then to 130 degrees and the other components are added as it is vigorously mixed. The oil obtained features the following properties: drop point 110 degrees, penetration at 25 degrees 142, specific volumetric resistance at 80 degrees 1.485 x 10 13, angle of dielectric losses 0.0049, dielectric strength at 20 degrees 240 kW/cm.

  10. Brazilian and Mexican experiences in the study of incipient domestication.

    Science.gov (United States)

    Lins Neto, Ernani Machado de Freitas; Peroni, Nivaldo; Casas, Alejandro; Parra, Fabiola; Aguirre, Xitlali; Guillén, Susana; Albuquerque, Ulysses Paulino

    2014-04-02

    diverse cultural and ecological contexts for a better understanding of evolution under incipient processes of domestication. Higher research effort is particularly required in Brazil, where studies on this topic are scarcer than in Mexico but where diversity of human cultures managing their also high plant resources diversity offer high potential for documenting the diversity of mechanisms of artificial selection and evolutionary trends. Comparisons and evaluations of incipient domestication in the regions studied as well as the Andean area would significantly contribute to understanding origins and diffusion of the experience of managing and domesticating plants.

  11. Some properties of castor oil affecting its performance as a capacitor impregnant and their significance to future impregnant research

    International Nuclear Information System (INIS)

    Boicourt, G.P.

    1975-01-01

    For a considerable time castor oil and polychlorinated biphenyl (PCB) have been the principal impregnants used in energy-storage capacitors. Castor oil has proven to be better than PCB for pulsed applications. PCB's have come under attack as an environmental hazard, while castor oil is a vegetable product and its supply and quality are subject to fluctuation. These two facts make the development of new impregnants desirable. The properties of PCB as a capacitor impregnant are well known. This paper first compares a number of properties of castor oil and PCB's. A comparison is made between the lives of castor oil capacitors and comparable PCB energy-storage capacitors. Some of the physical and chemical properties of castor oil which make it a good pulse capacitor impregnant are examined. These properties can be used as a guide for future research on new pulse capacitor impregnants

  12. Genomics of Rapid Incipient Speciation in Sympatric Threespine Stickleback.

    Directory of Open Access Journals (Sweden)

    David A Marques

    2016-02-01

    Full Text Available Ecological speciation is the process by which reproductively isolated populations emerge as a consequence of divergent natural or ecologically-mediated sexual selection. Most genomic studies of ecological speciation have investigated allopatric populations, making it difficult to infer reproductive isolation. The few studies on sympatric ecotypes have focused on advanced stages of the speciation process after thousands of generations of divergence. As a consequence, we still do not know what genomic signatures of the early onset of ecological speciation look like. Here, we examined genomic differentiation among migratory lake and resident stream ecotypes of threespine stickleback reproducing in sympatry in one stream, and in parapatry in another stream. Importantly, these ecotypes started diverging less than 150 years ago. We obtained 34,756 SNPs with restriction-site associated DNA sequencing and identified genomic islands of differentiation using a Hidden Markov Model approach. Consistent with incipient ecological speciation, we found significant genomic differentiation between ecotypes both in sympatry and parapatry. Of 19 islands of differentiation resisting gene flow in sympatry, all were also differentiated in parapatry and were thus likely driven by divergent selection among habitats. These islands clustered in quantitative trait loci controlling divergent traits among the ecotypes, many of them concentrated in one region with low to intermediate recombination. Our findings suggest that adaptive genomic differentiation at many genetic loci can arise and persist in sympatry at the very early stage of ecotype divergence, and that the genomic architecture of adaptation may facilitate this.

  13. Robust Fault Diagnosis Design for Linear Multiagent Systems with Incipient Faults

    Directory of Open Access Journals (Sweden)

    Jingping Xia

    2015-01-01

    Full Text Available The design of a robust fault estimation observer is studied for linear multiagent systems subject to incipient faults. By considering the fact that incipient faults are in low-frequency domain, the fault estimation of such faults is proposed for discrete-time multiagent systems based on finite-frequency technique. Moreover, using the decomposition design, an equivalent conclusion is given. Simulation results of a numerical example are presented to demonstrate the effectiveness of the proposed techniques.

  14. An innovative process for the impregnation of magnet coils and other structures

    International Nuclear Information System (INIS)

    Evans, D.; Morgan, J.T.

    1992-01-01

    The need to bond and encapsulate the conductor in many types of superconductive magnet is well understood. The choice of materials for bonding may influence the performance of the coil and the technique used for its application. This paper considers the merits of three types of close-quote bonding close-quote procedure and presents details of an innovative method for the vacuum impregnation of coils. The process has been developed and evaluated in an attempt to remove some of the uncertainties of the vacuum impregnation process that traditionally may be eliminated only with the use of sealed mould tools and high quality vacuum chambers. For large magnets or for mass production, this process may lead to a reduction in tooling and plant costs, together with reduced resin consumption and improved health and safety factors. The process has been developed in conjunction with a resin system that has been designed to exhibit excellent thermal shock characteristics and to minimise preparation time and post impregnation cleaning requirements

  15. Evidence of Incipient Forest Transition in Southern Mexico

    Science.gov (United States)

    Vaca, Raúl Abel; Golicher, Duncan John; Cayuela, Luis; Hewson, Jenny; Steininger, Marc

    2012-01-01

    Case studies of land use change have suggested that deforestation across Southern Mexico is accelerating. However, forest transition theory predicts that trajectories of change can be modified by economic factors, leading to spatial and temporal heterogeneity in rates of change that may take the form of the Environmental Kuznets Curve (EKC). This study aimed to assess the evidence regarding potential forest transition in Southern Mexico by classifying regional forest cover change using Landsat imagery from 1990 through to 2006. Patterns of forest cover change were found to be complex and non-linear. When rates of forest loss were averaged over 342 municipalities using mixed-effects modelling the results showed a significant (p<0.001) overall reduction of the mean rate of forest loss from 0.85% per year in the 1990–2000 period to 0.67% in the 2000–2006 period. The overall regional annual rate of deforestation has fallen from 0.33% to 0.28% from the 1990s to 2000s. A high proportion of the spatial variability in forest cover change cannot be explained statistically. However analysis using spline based general additive models detected underlying relationships between forest cover and income or population density of a form consistent with the EKC. The incipient forest transition has not, as yet, resulted in widespread reforestation. Forest recovery remains below 0.20% per year. Reforestation is mostly the result of passive processes associated with reductions in the intensity of land use. Deforestation continues to occur at high rates in some focal areas. A transition could be accelerated if there were a broader recognition among policy makers that the regional rate of forest loss has now begun to fall. The changing trajectory provides an opportunity to actively restore forest cover through stimulating afforestation and stimulating more sustainable land use practices. The results have clear implications for policy aimed at carbon sequestration through reducing

  16. Evidence of incipient forest transition in Southern Mexico.

    Directory of Open Access Journals (Sweden)

    Raúl Abel Vaca

    Full Text Available Case studies of land use change have suggested that deforestation across Southern Mexico is accelerating. However, forest transition theory predicts that trajectories of change can be modified by economic factors, leading to spatial and temporal heterogeneity in rates of change that may take the form of the Environmental Kuznets Curve (EKC. This study aimed to assess the evidence regarding potential forest transition in Southern Mexico by classifying regional forest cover change using Landsat imagery from 1990 through to 2006. Patterns of forest cover change were found to be complex and non-linear. When rates of forest loss were averaged over 342 municipalities using mixed-effects modelling the results showed a significant (p<0.001 overall reduction of the mean rate of forest loss from 0.85% per year in the 1990-2000 period to 0.67% in the 2000-2006 period. The overall regional annual rate of deforestation has fallen from 0.33% to 0.28% from the 1990s to 2000s. A high proportion of the spatial variability in forest cover change cannot be explained statistically. However analysis using spline based general additive models detected underlying relationships between forest cover and income or population density of a form consistent with the EKC. The incipient forest transition has not, as yet, resulted in widespread reforestation. Forest recovery remains below 0.20% per year. Reforestation is mostly the result of passive processes associated with reductions in the intensity of land use. Deforestation continues to occur at high rates in some focal areas. A transition could be accelerated if there were a broader recognition among policy makers that the regional rate of forest loss has now begun to fall. The changing trajectory provides an opportunity to actively restore forest cover through stimulating afforestation and stimulating more sustainable land use practices. The results have clear implications for policy aimed at carbon sequestration through

  17. Impregnation alternatives for Fe-based coal liquefaction catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R.K.; Armstong, B.T.; Givens, E.N. [Univ. of Kentucky, Lexington, KY (United States)

    1994-12-31

    Because of the cost effective and environmentally compatible nature of Fe, attention has been directed towards improving the utilization of this metal in direct coal liquefaction. Among the several factors thought to affect catalyst activity, much of this work has focused on dispersion. Weller and Pelipetz reported the importance of catalyst dispersion, based on experiments with a wide variety of catalysts in solvent-free liquefaction studies. And in the presence of solvent, other studies have demonstrated the advantages of adding the precursor by impregnation over its addition in the form of particulates. In general, a high surface/volume ratio, along with intimate contact between the active catalyst and coal, are thought to be the controlling factors. Dispersion, as normally inferred from changes in catalyst activity, may be affected by the mode of addition, the presence of solvent, and the initial composition of the precursor (e.g., soluble organometallics); and for coal-impregnated catalyst precursors, the choice of impregnation solvent and impregnation conditions. A variety of innovative strategies have been developed to introduce catalyst precursors to the liquefaction reaction while seeking to maintain particle size and distribution. These have included the use of emulsions and colloids, direct addition of ultra-fine particles to the slurry`s addition of oil soluble organometallics and carbonyls, ion exchange and impregnating the coal. This paper describes the results of liquefaction experiments carried out with the impregnation of subbituminous coal with iron.

  18. Tetracycline-impregnated enamel and dentin: duration of antimicrobial capacity.

    Science.gov (United States)

    Bjorvatn, K; Skaug, N; Selvig, K A

    1985-06-01

    The present study was done in order to examine the durability of the tetracycline-induced antimicrobial capacity, and also to assess the reproducibility of the bacterial growth-inhibitory assay used. Standardized enamel and dentin specimens were impregnated in aqueous solutions of tetracycline HCl, oxytetracycline HCl or doxycycline HCl, rinsed in water, and stored dry for 200 days. Another series of specimens was impregnated in solutions of doxycycline HCl and then rinsed in tap water for varying periods up to 35 days. In addition, drug-impregnated specimens were used for reproducibility tests without storage or prolonged rinsing. Impregnated specimens were tested for antimicrobial capacity on agar plates seeded with S. sanguis. After 24 h aerobic incubation in 10% CO2 atmosphere, the plates were inspected and the diameter of the bacterial growth inhibition zones measured. The drug-impregnated enamel and dentin specimens consistently demonstrated growth-inhibitory capacity. The results of the reproducibility tests showed moderate intrasample and day-to-day variation. Two hundred days of dry storage or 35 days soaking in water reduced, but did not eliminate, the bacterial growth-inhibitory capacity of the impregnated dental specimens. The results show that a short-term exposure of dental hard tissues to tetracyclines may result in a long-lasting antibacterial capacity.

  19. Fracture Resistance of Composite Fixed Partial Dentures Reinforced with Pre-impregnated and Non-impregnated Fibers

    Directory of Open Access Journals (Sweden)

    Ramin Mosharraf

    2012-02-01

    Full Text Available Background and aims. The mechanical properties of fiber-reinforced composite fixed partial dentures (FPDs are affected by fiber impregnation. The aim of this in vitro study was to compare the fracture resistance of composite fixed partial dentures reinforced with pre-impregnated and non-impregnated fibers. Materials and methods. Groups (n=5 of three-unit fiber-reinforced composite FPDs (23 mm in length from maxillary second premolar to maxillary second molar were fabricated on two abutments with pontic width of 12 mm. One group was fabricated as the control group with composite (Gradia and the other two groups were fabricated with composite (Gradia reinforced with pre-impregnated fiber (Fibrex ribbon and non-impregnated fiber (Fiber braid, respectively. The specimens were stored in distilled water for one week at 37°C and then tested in a universal testing machine by means of a three-point bending test. Statistical analysis consisted of one-way ANOVA and a post hoc Scheffé’s test for the test groups (α=0.05. Results. Fracture resistance (N differed significantly between the control group and the other two groups (P<0.001, but there were no statistically significant differences between the pre-impregnated and non-impregnated groups (P=0.565. The degree of deflection measured (mm did not differ significantly between the three groups (P=0.397, yet the mean deflection measured in pre-impregnated group was twice as that in the other two groups. Conclusion. Reinforcement of composite with fiber might considerably increase the fracture resistance of FPDs; however, the type of the fiber used resulted in no significant difference in fracture resistance of FPD specimens.

  20. Permanent antibiotic impregnated intramedullary nail in diabetic limb salvage: a case report and literature review

    Directory of Open Access Journals (Sweden)

    Jason B. Woods

    2012-02-01

    Full Text Available Managing complications after attempted hind foot and ankle arthrodesis with intramedullary nail fixation is a challenge. This situation becomes more problematic in the patient with diabetes mellitus and multiple comorbidities. Infection and subsequent osteomyelitis can be a devastating, limb threatening complication associated with these procedures. The surgeon must manage both the infectious process and the skeletal instability concurrently. This article provides a literature review and detailed management strategies for a modified technique of employing antibiotic impregnated polymethylmethacrylate-coated intramedullary nailing.

  1. Leaching and antimicrobial properties of silver nanoparticles loaded onto natural zeolite clinoptilolite by ion exchange and wet impregnation.

    Science.gov (United States)

    Missengue, Roland N M; Musyoka, Nicholas M; Madzivire, Godfrey; Babajide, Omotola; Fatoba, Ojo O; Tuffin, Marla; Petrik, Leslie F

    2016-01-28

    This study aimed to compare the leaching and antimicrobial properties of silver that was loaded onto the natural zeolite clinoptilolite by ion exchange and wet impregnation. Silver ions were reduced using sodium borohydride (NaBH 4 ). The leaching of silver from the prepared silver-clinoptilolite (Ag-EHC) nanocomposite samples and their antimicrobial activity on Escherichia coli Epi 300 were investigated. It was observed that the percentage of silver loaded onto EHC depended on the loading procedure and the concentration of silver precursor used. Up to 87% of silver was loaded onto EHC by wet impregnation. The size of synthesized silver nanoparticles varied between 8.71-72.67 nm and 7.93-73.91 nm when silver was loaded by ion exchange and wet impregnation, respectively. The antimicrobial activity of the prepared nanocomposite samples was related to the concentration of silver precursor used, the leaching rate and the size of silver nanoparticles obtained after reduction. However, only in the case of the nanocomposite sample (Ag-WEHC) obtained after loading 43.80 ± 1.90 µg of Ag per gram zeolite through wet impregnation was the leaching rate lower than 0.1 mg L -1 limit recommended by WHO, with an acceptable microbial killing effect.

  2. Clinical Experience With the Use of Negative Pressure Wound Therapy Combined With a Silver-impregnated Dressing in Mixed Wounds: A Retrospective Study of 50 Cases.

    Science.gov (United States)

    Bukovcan, Peter; Koller, Jan; Hajská, Marianna; Záhorec, Peter

    2016-08-01

    Although negative pressure wound therapy (NPWT) has been used for more than 20 years, as far as the authors are aware, there is little research aimed at the evaluation of the combination of NPWT with a silver-impregnated dressing. The aim of this study was to examine the effect, efficacy, and safety of NPWT in conjunction with a silver-impregnated dressing. The authors used a retrospective study of 54 acute and chronic wounds treated in 50 patients over a 2-year period. Demographic data, wound characterizations, wound cultures before and after NPWT, the duration of NPWT and number of sponge changes for each patient, the types of surgical procedures used for wound closure following NPWT, and the healing time and length of hospital stays were recorded. In 26 wounds, deep structures (ie, bones and tendons) were exposed. The mean NPWT duration was 9.2 days. Mean healing time was 16 days. There was a statistically significant decrease in the pathogenic microbial strains after NPWT treatment combined with the silver-impregnated dressing (paired t test; P = 0.0038). The shift from complicated to easier surgical wound-closure procedures was observed. According to all results obtained, described, and discussed, the authors consider the use of a nonadherent silver-impregnated dressing in conjunction with NPWT to be beneficial and efficacious. No adverse events or reactions related to the silver-impregnated contact layer used during NPWT have been observed in the patients, which confirmed the safety of this method.

  3. Degradation Free Vacuum Epoxy Impregnated short REBCO Undulator Magnets

    Science.gov (United States)

    Kesgin, I.; Hasse, Q.; Ivanyushenkov, Y.; Welp, U.

    2017-12-01

    The source of high–brilliance, hard x-ray radiation in light sources and free electron lasers are undulator insertion devices. Recently, REBCO-based superconductors have been demonstrated to be a potential candidate to enhance the performance of the undulator insertion devices. Epoxy impregnation remained as one of the steps which is crucial to fully realize this technology. Epoxy impregnation of magnets is required because it prevents the motion of the wire and provides conduction cooling to the winding layers. Up until now, most of the impregnated REBCO coils/magnets showed some degree of degradation after cold cycles. We developed a vacuum impregnation technique that does not degrade the performance of the short REBCO prototype undulator magnets after cold cycles. The results showed that in order to prevent degradation, a bumper layer between the magnet winding stacks and the epoxy/powder mixture is required. Microstructure images of vacuum impregnated coil packs showed homogenously-spaced REBCO winding layers and very thin epoxy fillings between the layers, which is important for the overall performance of the device.

  4. Degradation free epoxy impregnation of REBCO coils and cables

    International Nuclear Information System (INIS)

    Barth, C; Bagrets, N; Weiss, K-P; Bayer, C M; Bast, T

    2013-01-01

    In applications utilizing high-temperature superconductors (HTS) under high mechanical loads as high-field magnets or rotors of generators and motors, the rare-earth–barium–copper-oxide (REBCO) tapes have to be stabilized mechanically. This is achieved using support structures of structural materials and filling the voids in the support through the impregnation of the tapes. The impregnation prevents movement of the tapes and distributes mechanical loads evenly. With high mechanical strengths and low sensitivities to rapid temperature changes, epoxy resins are desired materials for the impregnation of superconductor tapes. However, a strong decrease of the current-carrying capabilities was observed in previous epoxy-impregnated REBCO coils. In this work the thermal expansion mismatches between epoxy resins and REBCO tapes are identified as the cause of these degradations. Fillers are used to reduce the thermal expansions of glues and resins. Mixtures with varying filler contents are analyzed systematically. Their thermal expansions and the corresponding degradations of short REBCO tape samples are measured. A mixture of epoxy resin and filler is found which allows degradation-free impregnation of REBCO tapes. This mixture is validated on a 1.2 m long 15 × 5 Roebel-assembled-coated-conductor (RACC) cable from Industrial Research Limited (IRL). (paper)

  5. Impregnated Fibrous Materials. Report of a Study Group on Impregnated Fibrous Materials

    International Nuclear Information System (INIS)

    1968-01-01

    There has recently been renewed interest in the use of radiation from radioisotopes or particle accelerators to initiate and sustain chemical reactions. Particular attention is being paid to the production of wood-plastic composites, a process which is now a commercial reality with radiation competing against chemical methods to enhance the properties of wood. It has been reported that water repellancy, hardness, weathering, insect and chemical resistance, compressive, bending and shear strength can be significantly improved by the process, but so far there has been a limited commercial outlet for the product. Papers on this subject were presented at the International Atomic Energy Agency's Symposium on Industrial Uses of Large Radiation Sources, Salzburg, May 1963, and since then the Agency has been aware of the interest of developing countries in conducting research on wood and other fibrous materials as a means of further exploiting natural resources. It was felt that some attempt should be made to co-ordinate, on a regional basis, the work being done in this field and at the same time review the world status, including the associated technology in such areas as monomer-polymer chemistry and impregnation techniques where they are directly related to this work. Because of the wide range of fibrous materials being studied there, Asia and the Far East was chosen as the most representative area and 39 participants from 13 countries, and from international organizations, met in Bangkok from 20 to 24 November 1967 to assess the potential of impregnated fibrous materials. This report is a record of the meeting and is based not only on work performed both inside and outside the region but also on details of the resources and industries in the area

  6. Non-radioactive determination of the penetration of methyl iodide through impregnated charcoals during dosing and purging

    International Nuclear Information System (INIS)

    Romans, J.B.; Deitz, V.R.

    1979-01-01

    A laboratory procedure is described using methyl iodide-127 which had the same linear flow of air (12.2 m/min) and contact time (0.25 sec.) as the RDT M16 Test Procedure. Only one-fourth of the charcoal was used (in a bed 2.54 cm diameter and 5.08 cm high) and the required dose of methyl iodide-127 was reduced from 5.25 to 1.31 mg. The inlet concentrations were determined with a gas chromatograph and the effluent concentrations with a modified microcoulombmeter. Two calibration procedures were used: (1) known vapor pressure of iodine crystals, and (2) quantitative pyrolysis of the methyl iodide-127 delivered from certified permeation tubes. Five charcoals and three impregnations were used in this study. Typical behaviors are given in 90% RH air with the charcoals either prehumidified for 16 hours at 90% RH or without the prehumidification. The breakthrough curves, concentration versus time, rose very slowly for the first 120 minutes and then more rapidly for an additional time. The lack of a dependence on the magnitude of the dose is compatible with a catalytic trapping mechanism. In the case of KI/sub x/ impregnations, there was excess emission of iodine during purging over that introduced as methyl iodide-127 which must have originated in the reservoir of iodine contained in the impregnation

  7. Localization of incipient tip vortex cavitation using ray based matched field inversion method

    Science.gov (United States)

    Kim, Dongho; Seong, Woojae; Choo, Youngmin; Lee, Jeunghoon

    2015-10-01

    Cavitation of marine propeller is one of the main contributing factors of broadband radiated ship noise. In this research, an algorithm for the source localization of incipient vortex cavitation is suggested. Incipient cavitation is modeled as monopole type source and matched-field inversion method is applied to find the source position by comparing the spatial correlation between measured and replicated pressure fields at the receiver array. The accuracy of source localization is improved by broadband matched-field inversion technique that enhances correlation by incoherently averaging correlations of individual frequencies. Suggested localization algorithm is verified through known virtual source and model test conducted in Samsung ship model basin cavitation tunnel. It is found that suggested localization algorithm enables efficient localization of incipient tip vortex cavitation using a few pressure data measured on the outer hull above the propeller and practically applicable to the typically performed model scale experiment in a cavitation tunnel at the early design stage.

  8. Fault prediction for nonlinear stochastic system with incipient faults based on particle filter and nonlinear regression.

    Science.gov (United States)

    Ding, Bo; Fang, Huajing

    2017-05-01

    This paper is concerned with the fault prediction for the nonlinear stochastic system with incipient faults. Based on the particle filter and the reasonable assumption about the incipient faults, the modified fault estimation algorithm is proposed, and the system state is estimated simultaneously. According to the modified fault estimation, an intuitive fault detection strategy is introduced. Once each of the incipient fault is detected, the parameters of which are identified by a nonlinear regression method. Then, based on the estimated parameters, the future fault signal can be predicted. Finally, the effectiveness of the proposed method is verified by the simulations of the Three-tank system. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  9. Fog-harvesting potential of lubricant-impregnated electrospun nanomats.

    Science.gov (United States)

    Lalia, Boor Singh; Anand, Sushant; Varanasi, Kripa K; Hashaikeh, Raed

    2013-10-22

    Hydrophobic PVDF-HFP nanowebs were fabricated by a facile electrospinning method and proposed for harvesting fog from the atmosphere. A strong adhesive force between the surface and a water droplet has been observed, which resists the water being shed from the surface. The water droplets on the inhomogeneous nanomats showed high contact angle hysteresis. The impregnation of nanomats with lubricants (total quartz oil and Krytox 1506) decreased the contact angle hysteresis and hence improved the roll off of water droplets on the nanomat surface. It was found that water droplets of 5 μL size (diameter = 2.1 mm) and larger roll down on an oil-impregnated surface, held vertically, compared to 38 μL (diameter = 4.2 mm) on a plain nanoweb. The contact angle hysteresis decreased from ~95 to ~23° with the Krytox 1506 impregnation.

  10. Resin impregnation process for producing a resin-fiber composite

    Science.gov (United States)

    Palmer, Raymond J. (Inventor); Moore, William E. (Inventor)

    1994-01-01

    Process for vacuum impregnation of a dry fiber reinforcement with a curable resin to produce a resin-fiber composite, by drawing a vacuum to permit flow of curable liquid resin into and through a fiber reinforcement to impregnate same and curing the resin-impregnated fiber reinforcement at a sufficient temperature and pressure to effect final curing. Both vacuum and positive pressure, e.g. autoclave pressure, are applied to the dry fiber reinforcement prior to application of heat and prior to any resin flow to compact the dry fiber reinforcement, and produce a resin-fiber composite of reduced weight, thickness and resin content, and improved mechanical properties. Preferably both a vacuum and positive pressure, e.g. autoclave pressure, are also applied during final curing.

  11. Physical and chemical durability of cement impregnated epoxy resin

    International Nuclear Information System (INIS)

    Suryantoro

    1997-01-01

    Immobilization of simulation radioactive waste contains Cs and Sr with cement impregnated epoxy resin has been done. Low level liquid waste in 30% weight mixed cement homogeneously and then set in its curing time about 28 days. Waste from was impregnated with epoxy resin (Bisphenol-A-diglycidylether) and use Triethylenteramin as catalyst. the sample of cement impregnated epoxy resin 2.5 cm x 2.5 cm in diameter and length was tested by Paul Weber. The compressive strength was obtained of 4.08 kN.cm - 2. The sochxlet apparatus was run on flow rate of 300 ml/hour at 100 o C and during 24 hours. The leaching rate of Cs was round on 5.5 x 10 - 4 g.cm - 2.d - 1 and Sr was 6.1 x 10 - 4 g.cm - 2.d - 1 (author)

  12. Supercritical CO2 impregnation of polyethylene components for medical purposes

    Directory of Open Access Journals (Sweden)

    Gamse Thomas

    2007-01-01

    Full Text Available Modem hip and knee endoprosthesis are produced in titanium and to reduce the friction at the contact area polymer parts, mainly ultra-high molecular weight polyethylene (UHMW-PE, are installed. The polyethylene is impregnated with a-tocopherol (vitamin E before processing for remarkable decrease of oxidative degradation. Cross linked UHMW-PE offers much higher stability, but a-tocopherol cannot be added before processing, because a-tocopherol hinders the cross linking process accompanied by a heavy degradation of the vitamin. The impregnation of UHMW-PE with a-tocopherol has to be performed after the cross linking process and an accurate concentration has to be achieved over the cross section of the whole material. In the first tests UHMW-PE-cubes were stored in pure a-tocopherol under inert atmosphere at temperatures from 100 to 150 °C resulting in a high mass fraction of a-tocopherol in the edge zones and no constant concentration over the cross section. For better distribution and for regulating the mass fraction of a-tocopherol in the cross linked UHMW-PE material supercritical CO2 impregnation tests were investigated. Again UHMW-PE-cubes were impregnated in an autoclave with a-tocopherol dissolved in supercritical CO2 at different pressures and temperatures with variable impregnation times and vitamin E concentrations. Based on the excellent results of supercritical CO2 impregnation standard hip and knee cups were stabilized nearly homogeneously with varying mass fraction of a-tocopherol.

  13. Incipient Stator Insulation Fault Detection of Permanent Magnet Synchronous Wind Generators Based on Hilbert–Huang Transformation

    DEFF Research Database (Denmark)

    Wang, Chao; Liu, Xiao; Chen, Zhe

    2014-01-01

    Incipient stator winding fault in permanent magnet synchronous wind generators (PMSWGs) is very difficult to be detected as the fault generated variations in terminal electrical parameters are very weak and chaotic. This paper simulates the incipient stator winding faults at different degree...

  14. Correlation between laser fluorescence readings and volume of tooth preparation in incipient occlusal caries in vitro.

    Science.gov (United States)

    Ghaname, Eduardo S; Ritter, André V; Heymann, Harald O; Vann, William F; Shugars, Daniel A; Bader, James D

    2010-02-01

    This study evaluated the correlation between laser fluorescence readings and the extent of incipient occlusal caries as measured by the volume of tooth preparation in vitro. One hundred and three permanent molars and premolars containing incipient occlusal pit-and-fissure caries and sound occlusal surfaces (1/4 of the sample, control) were selected. DIAGNOdent (KaVo Dental Corporation, Lake Zurich, IL, USA) readings were obtained according to manufacturer instructions. Caries was removed with 1/4 round burs in high speed. The volume of tooth preparation was measured using a surrogate measure based on the amount of composite needed to fill the preparations. Sensitivity and specificity using different cutoff values were calculated for lesions/preparations extending into dentin. The results were analyzed statistically. The Pearson correlation for preparation volume and DIAGNOdent reading measurements was low (r = 0.285). Sensitivity and specificity of DIAGNOdent for detection of dentinal lesions were 0.83 and 0.60, and 0.66 and 0.73 for the cutoff values of 20 and 30, respectively. Within the limitations of this study, laser fluorescence measured with DIAGNOdent does not correlate well with extent of carious tooth structure in incipient occlusal caries. Clinicians should not rely only on DIAGNOdent readings to determine the extension of incipient occlusal caries.

  15. Incipient merger of Cls 11 and 5 in Xhosa? | Gowlett | South African ...

    African Journals Online (AJOL)

    In Xhosa, there appears to be an incipient merger between Noun Classes 5 and 11, as revealed by frequent mismatches between Cl. 11 nouns and various concordial elements, and even the replacement of the Cl. 11 noun prefix by that of Cl. 5. In this article we explore possible reasons for this putative merger, and present ...

  16. Transformer Incipient Fault Prediction Using Combined Artificial Neural Network and Various Particle Swarm Optimisation Techniques.

    Directory of Open Access Journals (Sweden)

    Hazlee Azil Illias

    Full Text Available It is important to predict the incipient fault in transformer oil accurately so that the maintenance of transformer oil can be performed correctly, reducing the cost of maintenance and minimise the error. Dissolved gas analysis (DGA has been widely used to predict the incipient fault in power transformers. However, sometimes the existing DGA methods yield inaccurate prediction of the incipient fault in transformer oil because each method is only suitable for certain conditions. Many previous works have reported on the use of intelligence methods to predict the transformer faults. However, it is believed that the accuracy of the previously proposed methods can still be improved. Since artificial neural network (ANN and particle swarm optimisation (PSO techniques have never been used in the previously reported work, this work proposes a combination of ANN and various PSO techniques to predict the transformer incipient fault. The advantages of PSO are simplicity and easy implementation. The effectiveness of various PSO techniques in combination with ANN is validated by comparison with the results from the actual fault diagnosis, an existing diagnosis method and ANN alone. Comparison of the results from the proposed methods with the previously reported work was also performed to show the improvement of the proposed methods. It was found that the proposed ANN-Evolutionary PSO method yields the highest percentage of correct identification for transformer fault type than the existing diagnosis method and previously reported works.

  17. Incipient ovarian failure and premature ovarian failure show the same immunological profile

    NARCIS (Netherlands)

    van Kasteren, YM; von Blomberg, M; Hoek, A; de Koning, C; Lambalk, N; van Montfrans, J; Kuik, J

    PROBLEM: Incipient ovarian failure (IOF) is characterized by regular menstrual cycles, infertility and a raised early-follicular FSH in women under 40. IOF might be a precursor or a mitigated form of premature ovarian failure (POF). Disturbances in the immune system may play a role in ovarian

  18. Abnormal albuminuria and blood pressure rise in incipient diabetic nephropathy induced by exercise

    DEFF Research Database (Denmark)

    Christensen, Cramer

    1984-01-01

    The aim of the study was to evaluate the influence of light to moderate dynamic work (450 kpm/min followed by 600 kpm/min during 20 min each) on the blood pressure and renal protein handling in insulin-dependent diabetic patients with incipient nephropathy (D3) (elevated baseline albumin excretio...

  19. CSF biomarkers and incipient Alzheimer disease in patients with mild cognitive impairment.

    NARCIS (Netherlands)

    Mattsson, N.; Zetterberg, H.; Hansson, O.; Andreasen, N.; Parnetti, L.; Jonsson, M.; Herukka, S.K.; Flier, W.M. van der; Blankenstein, M.A.; Ewers, M.; Rich, K.; Kaiser, E.; Verbeek, M.M.; Tsolaki, M.; Mulugeta, E.; Rosen, E.; Aarsland, D.; Visser, P.J.; Schroder, J.; Marcusson, J.; Leon, M.; Hampel, H.; Scheltens, P.; Pirttilä, T.; Wallin, A.; Jonhagen, M.E.; Minthon, L.; Winblad, B.; Blennow, K.

    2009-01-01

    CONTEXT: Small single-center studies have shown that cerebrospinal fluid (CSF) biomarkers may be useful to identify incipient Alzheimer disease (AD) in patients with mild cognitive impairment (MCI), but large-scale multicenter studies have not been conducted. OBJECTIVE: To determine the diagnostic

  20. Incipient ferroelectric properties of NaTaO.sub.3./sub

    Czech Academy of Sciences Publication Activity Database

    Kamba, Stanislav; Goian, Veronica; Bovtun, Viktor; Nuzhnyy, Dmitry; Kempa, Martin; Spreitzer, M.; König, J.; Suvorov, D.

    2012-01-01

    Roč. 426, SI (2012), s. 206-214 ISSN 0015-0193 R&D Projects: GA ČR(CZ) GA202/09/0682 Institutional research plan: CEZ:AV0Z10100520 Keywords : incipient ferroelectricity * infrared and THz spectroscopy * phonons * microwave ceramics Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.415, year: 2012

  1. Influence of decelerating flow on incipient motion of a gravel-bed ...

    Indian Academy of Sciences (India)

    Influence of decelerating flow on incipient motion of a gravel-bed stream. HOSSEIN AFZALIMHR. ∗,1. , SUBHASISH DEY. 2 and. POONEH RASOULIANFAR. 1. 1Department of Water Engineering, Isfahan University of Technology, Isfahan, Iran. 2Department of Civil Engineering, Indian Institute of Technology,. Kharagpur ...

  2. Transformer Incipient Fault Prediction Using Combined Artificial Neural Network and Various Particle Swarm Optimisation Techniques

    Science.gov (United States)

    2015-01-01

    It is important to predict the incipient fault in transformer oil accurately so that the maintenance of transformer oil can be performed correctly, reducing the cost of maintenance and minimise the error. Dissolved gas analysis (DGA) has been widely used to predict the incipient fault in power transformers. However, sometimes the existing DGA methods yield inaccurate prediction of the incipient fault in transformer oil because each method is only suitable for certain conditions. Many previous works have reported on the use of intelligence methods to predict the transformer faults. However, it is believed that the accuracy of the previously proposed methods can still be improved. Since artificial neural network (ANN) and particle swarm optimisation (PSO) techniques have never been used in the previously reported work, this work proposes a combination of ANN and various PSO techniques to predict the transformer incipient fault. The advantages of PSO are simplicity and easy implementation. The effectiveness of various PSO techniques in combination with ANN is validated by comparison with the results from the actual fault diagnosis, an existing diagnosis method and ANN alone. Comparison of the results from the proposed methods with the previously reported work was also performed to show the improvement of the proposed methods. It was found that the proposed ANN-Evolutionary PSO method yields the highest percentage of correct identification for transformer fault type than the existing diagnosis method and previously reported works. PMID:26103634

  3. Arsenic removal using silver-impregnated Prosopis spicigera L ...

    African Journals Online (AJOL)

    Arsenic removal using silver-impregnated Prosopis spicigera L. wood (PSLW) activated carbon: batch and column studies. ... Arsenic uptake has no regular trend with increasing pH; contains two adsorption maxima, the first adsorption maximum at pH 4.0 and a second adsorption maximum at pH 10.0. The extent of As (III) ...

  4. Properties of carbonisation products obtained from impregnated coal

    Czech Academy of Sciences Publication Activity Database

    Plevová, Eva; Šugárková, Věra; Kaloč, M.; Vaculíková, Lenka

    -, - (2008), s. 52-61. ISBN 978-80-248-1939-6 Grant - others:GA CŘ(CZ) GA105/00/1698 Institutional research plan: CEZ:AV0Z30860518 Keywords : chlorides * impregnation * coal Subject RIV: CC - Organic Chemistry

  5. Determination of atmospheric nitrogen dioxide by sampling with impregnated filters

    International Nuclear Information System (INIS)

    Galiano, J.A.; Palomares, F.

    1978-01-01

    The performance of filters impregnated with triethanolamine for the collection and subsequent determination of atmospheric nitrogen dioxide is studied taking into account the influence of several parameters: storage of filters, reagents, elapsed time, sampling efficiency, etc. The results obtained for sampling times of 24 hours are satisfactory. (author) [es

  6. Leaching of Silver from Silver-Impregnated Food Storage Containers

    Science.gov (United States)

    Hauri, James F.; Niece, Brian K.

    2011-01-01

    The use of silver in commercial products has proliferated in recent years owing to its antibacterial properties. Food containers impregnated with micro-sized silver promise long food life, but there is some concern because silver can leach out of the plastic and into the stored food. This laboratory experiment gives students the opportunity to…

  7. Studies of properties of rubber wood with impregnation of polymer

    Indian Academy of Sciences (India)

    Unknown

    checked and found to be improved by incorporation of GMA as the crosslinker with styrene. The polymer- impregnated wood has also been characterized by FTIR spectroscopy and DSC. Keywords. Wood; composite; crosslinker; polymers; styrene–glycidyl methacrylate. 1. Introduction. Wood, a renewable resource and ...

  8. Textile impregnation with thermoplastic resin - models and application

    NARCIS (Netherlands)

    Loendersloot, Richard; Grouve, Wouter Johannes Bernardus; Lamers, E.A.D.; Wijskamp, Sebastiaan; Kelly, P.A.; Bickerton, S.; Lescher, P.; Govignon, Q.

    2012-01-01

    One of the key issues of the development of cost-effective thermoplastic composites for the aerospace industry is the process quality control. A complete, void free impregnation of the textile reinforcement by the thermoplastic resin is an important measure of the quality of composites. The

  9. Chiral separation of amino-alcohols using extractant impregnated resins

    NARCIS (Netherlands)

    Babic, K.; Driessen, G.H.M.; van der Ham, Aloysius G.J.; de Haan, A.B.

    2007-01-01

    The performance of extractant impregnated resin (EIR) technology for chiral separation of amino-alcohols has been investigated. Phenylglycinol was selected as an archetype model enantiomer and azophenolic crown ether was used as a versatile enantioselective extractant. 1-Phenyloctane was selected as

  10. Forecasting the condition of petroleum impregnated load bearing ...

    African Journals Online (AJOL)

    Petroleum products (PP) used in industrial processes systematically fall on the load-bearing CRC structures and gradually impregnate therein. Currently, available guidelines for the assessment of technical condition and reliability of load-bearing CRC structures do not fully take into account the effect of viscosity of PP that ...

  11. Immobilization of tritiated aqueous waste in polymer impregnated concrete

    International Nuclear Information System (INIS)

    Neilson, R.M. Jr.; Colombo, P.; Becker, W.

    1977-01-01

    Techniques have been developed at Brookhaven National Laboratory for the immobilization of high-level tritiated aqueous waste in polymer impregnated concrete (PIC). These techniques are discussed and the rates of tritium release from PIC waste forms for both static leaching in distilled water and burial in test lysimeters at the Savannah River Plant (SRP) are reported

  12. Study Adsorption Desorption of Manganese(ii) Using Impregnated Chitin-cellulose as Adsorbent

    OpenAIRE

    Lesbani, Aldes; Turnip, Ema Veronika; Mohadi, Risfidian; Hidayati, Nurlisa

    2015-01-01

    - Study adsorption desorption of manganese(II) using impregnated chitin-cellulose as adsorbent has been carried out. Chitin was extracted from snail shell and cellulose isolated from rice straw. Chitin and cellulose were impregnated using thiourea as impregnant agent. Characterization of chitin and cellulose was performed using FTIR spectroscopy, determination of water content, and ash content, while impregnated chitin-cellulose was characterized using FTIR spectrophotometer and X-Ray diffrac...

  13. Determination and microscopic study of incipient defects in irradiated power reactor fuel rods. Final report

    International Nuclear Information System (INIS)

    Pasupathi, V.; Perrin, J.S.; Roberts, E.

    1978-05-01

    This report presents the results of nondestructive and destructive examinations carried out on the Point Beach-1 (PWR) and Dresden-3 (BWR) candidate fuel rods selected for the study of pellet-clad interaction (PCI) induced incipient defects. In addition, the report includes results of examination of sections from Oskarshamn-1 (BWR) fuel rods. Eddy current examination of Point Beach-1 rods showed indications of possible incipient defects in the fuel rods. The profilometry and the gamma scan data also indicated that the source of the eddy current indications may be incipient defects. No failed rods or rods with incipient failure were found in the sample from Point Beach-1. Despite the lack of success in finding incipient defects and filed rods, the mechanism for fuel rod failures in Point Beach-1 is postulated to be PCI-related, with high startup rates and fuel handling being the key elements. Nine out of the 10 candidate fuel rods from Dresden-3 (BWR) were failed, and all the failed rods had leaked water so that the initial mechanism was observed. Examination of clad inner surfaces of the specimens from failed and unfailed rods showed fuel deposits of widely varying appearance. The deposits were found to contain uranium, cesium, and tellurium. Transmission electron microscopy of clad specimens showed evidence of microscopic strain. Metallographic examination of fuel pellets from the peak transient power location showed extensive grain boundary separation and axial movement of the fuel indicative of rapid release of fission products. Examination of Oskarshamn clad specimens did not show any stress corrosion crack (SCC) type defects. The defects found in the examinations appear to be related to secondary hydriding. The clad inner surface of the Oskarshamn specimens also showed uranium-rich deposits of varying features

  14. Incipient cytotoxicity: A time-independent measure of cytotoxic potency in vitro.

    Science.gov (United States)

    Gülden, Michael; Kähler, Daria; Seibert, Hasso

    2015-09-01

    Time is an important determinant of toxicity but largely ignored in in vitro toxicity assays where exposure times chosen are rather arbitrary. To investigate the impact of time on the cytotoxic potency of chemicals in vitro, the concentration dependent cytotoxic action of selected chemicals (surfactants, metals, oxidative stressors, a mitochondrial poison) was determined after various exposure times (1-72 h) in cultures of Balb/c 3T3 cells. Time affected the cytotoxic potency as well as the cytotoxic efficacy. The median cytotoxic concentrations, EC50, decreased and in most cases approached an "incipient" value, EC50,∞, within 72 h. Cytotoxicity due to mitochondrial insult occurred after a threshold time which was dependent on the medium glucose concentration. Within the chemicals studied the extent of potency change with time ranged from 3- to >1000-fold and the "time to incipient cytotoxicity", tic, from 4 to >72 h. Hence, also the relative cytotoxic potencies depend on exposure time. Ignoring this may lead to severe bias in toxicological hazard and risk assessment. Therefore it is recommended to determine the incipient cytotoxic potency of chemical compounds, represented by, e.g., the incipient median effect (EC50,∞), no effect (NEC∞) or lowest effect concentrations (LEC∞) instead of measures obtained after arbitrary exposure times. If this is not possible, the 72 h-potency measurements appear to be useful surrogates. These time-independent incipient potency values can be reasonably compared between substances, endpoints, cells and biological test systems and may serve to define points of departure for quantitative in vitro-in vivo extrapolations. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  15. The edible cocktail: the effect of sugar and alcohol impregnation on the crunchiness of fruit

    NARCIS (Netherlands)

    Scholten, E.; Peters, M.M.J.P.

    2012-01-01

    Vacuum impregnation is seen as a valuable technique for flavor pairing in the catering industry. One of the applications of this technique is the creation of edible cocktails by impregnating of fruits with liquors, leading to an interplay of different flavors. However, the effect of the impregnation

  16. Impregnation quality of shredded semipreg after compression moulding

    Science.gov (United States)

    Vincent, G.; Balakrishnan, V.; de Bruijn, T. A.; Wijskamp, S.; Abdul Rasheed, M. I.

    2017-10-01

    Manufacturing of thermoplastic composites (TPC) inherently generates scrap, mainly in the form of offcuts or rejected parts. The growth of TPC over recent decades has now reached a point where developing specific recycling solutions for TPC waste has become crucial. While looking at the various steps during which scrap is produced, the nesting of semipreg or prepreg appears to be critical. This work aims to develop a route for recycling semipreg offcuts, comprising shredding and compression moulding. This article focuses on an experimental study of the compression moulding step of carbon fibres reinforced PPS (C/PPS) to investigate the uniformity and impregnation quality of plates. These plates were realised in a picture frame while varying both the fibre volume content between 30% and 50% and the processing parameters. Visual inspection and cross-sectional microscopy were performed to assess the quality of each plate. As a first step, the influence of the type of added matrix (film, powder, pellets) and the type of pre-impregnation (film, powder) was studied. Stacking of polymer powder with shredded powder-coated semipreg gave the best impregnation quality. It was also shown that longer dwell time at melt leads to better consolidation quality. However, the difficulty in obtaining good impregnation comes from the disentangled shredded material, which is composed of three forms: semipreg flakes, dry bundles and pieces of matrix. When dry bundles reach the mould surfaces during the filling of the mould or when they are packed together, the consolidation cycle hardly impregnates them and they remain dry afterwards. Furthermore, large local variations of fibre fraction were noticed, resulting from a random mould filling. Therefore, the recycling solution for shredded semipreg is feasible when the fibre fraction is reduced but improvements on the part variability still have to be made.

  17. On the effect of cross sectional shape on incipient motion and deposition of sediments in fixed bed channels

    Directory of Open Access Journals (Sweden)

    Safari Mir-Jafar-Sadegh

    2014-03-01

    Full Text Available The condition of incipient motion and deposition are of the essential issues for the study of sediment transport. This phenomenon is of great importance to hydraulic engineers for designing sewers, drainage, as well as other rigid boundary channels. This is a study carried out with the objectives of describing the effect of cross-sectional shape on incipient motion and deposition of particles in rigid boundary channels. In this research work, the experimental data given by Loveless (1992 and Mohammadi (2005 are used. On the basis of the critical velocity approach, a new incipient motion equation for a V-shaped bottom channel and incipient deposition of sediment particles equations for rigid boundary channels having circular, rectangular, and U-shaped cross sections are obtained. New equations were compared to the other incipient motion equations. The result shows that the cross-sectional shape is an important factor for defining the minimum velocity for no-deposit particles. This study also distinguishes incipient motion of particles from incipient deposition for particles. The results may be useful for designing fixed bed channels with a limited deposition condition.

  18. Study of formation mechanism of incipient melting in thixo-cast Al–Si–Cu–Mg alloys

    Energy Technology Data Exchange (ETDEWEB)

    Du, Kang, E-mail: du126kang@126.com; Zhu, Qiang, E-mail: zhu.qiang@grinm.com; Li, Daquan, E-mail: lidaquan@grinm.com; Zhang, Fan, E-mail: sk_zf@163.com

    2015-08-15

    Mechanical properties of thixo-cast Al–Si–Cu–Mg alloys can be enhanced by T61 heat treatment. Copper and magnesium atoms in aluminum matrix can form homogeneously distributed precipitations after solution and aging treatment which harden the alloys. However, microsegregation of these alloying elements could form numerous tiny multi-compound phases during solidification. These phases could cause incipient melting defects in subsequent heat treatment process and degrade the macro-mechanical properties of productions. This study is to present heterogeneous distribution of Cu, Si, and Mg elements and formation of incipient melting defects (pores). In this study, incipient melting pores that occurred during solution treatment at various temperatures, even lower than common melting points of various intermetallic phases, were identified, in terms of a method of investigating the same surface area in the samples before and after solution treatment in a vacuum environment. The results also show that the incipient melting mostly originates at the clusters with fine intermetallic particles while also some at the edge of block-like Al{sub 2}Cu. The fine particles were determined being Al{sub 2}Cu, Al{sub 5}Cu{sub 2}Mg{sub 8}Si{sub 6} and Al{sub 8}Mg{sub 3}FeSi{sub 2}. Tendency of the incipient melting decreases with decreases of the width of the clusters. The formation mechanism of incipient melting pores in solution treatment process was discussed using both the Fick law and the LSW theory. Finally, a criterion of solution treatment to avoid incipient melting pores for the thixo-cast alloys is proposed. - Highlights: • In-situ comparison technique was used to analysis the change of eutectic phases. • The ralationship between eutectic phase size and incipient melting was studied. • Teat treatment criterion for higher incipient melting resistance was proposed.

  19. Investigation of barium-calcium aluminate process to manufacture and characterize impregnated thermionic cathode for power microwave devices

    International Nuclear Information System (INIS)

    Higashi, Cristiane

    2006-01-01

    In the present work it is described the barium calcium aluminate manufacture processes employed to produce impregnated cathodes to be used in a traveling-wave tube (TWT). The cathodes were developed using a tungsten body impregnated with barium and calcium aluminate with a 5:3:2 proportion (molar). Three different processes were investigated to obtain this material: solid-state reaction, precipitation and crystallization. Thermal analysis, thermogravimetry specifically, supported to determine an adequate preparation procedure (taking into account temperature, time and pyrolysis atmosphere). It was verified that the crystallization showed a better result when compared to those investigated (solid-state reaction and precipitation techniques - formation temperature is about 1000 deg C in hydrogen atmosphere), whereas it presented the lower formation temperature (800 deg C) in oxidizing atmosphere (O 2 ). It was used the practical work function distribution theory (PWFD) of Miram to characterize thermionic impregnated cathode. The PWFD curves were used to characterize the barium-calcium aluminate cathode. PWFD curves shown that the aluminate cathode work function is about 2,00 eV. (author)

  20. Heavy metal ion adsorption onto polypyrrole-impregnated porous carbon.

    Science.gov (United States)

    Choi, Moonjung; Jang, Jyongsik

    2008-09-01

    Polypyrrole-impregnated porous carbon was readily synthesized using vapor infiltration polymerization of pyrrole monomers. The results show that the functionalized polymer layer was successfully coated onto the pore surface of carbon without collapse of mesoporous structure. The modified porous carbon exhibited an improved complexation affinity for heavy metal ions such as mercury, lead, and silver ions due to the amine group of polypyrrole. The introduced polypyrrole layer could provide the surface modification to be applied for heavy metal ion adsorbents. Especially, polymer-impregnated porous carbon has an enhanced heavy metal ion uptake, which is 20 times higher than that of adsorbents with amine functional groups. Furthermore, the relationship between the coated polymer amount and surface area was also investigated in regard to adsorption capacity.

  1. Sensitivity of gap symmetry to an incipient band: Application to iron based superconductors

    Science.gov (United States)

    Mishra, Vivek; Scalapino, Douglas; Maier, Thomas

    Observation of high temperature superconductivity in iron-based superconductors with a submerged hole band has attracted wide interest. A spin fluctuation mediated pairing mechanism has been proposed as a possible explanation for the high transition temperatures observed in these systems. Here we discuss the importance of the submerged band in the context of the gap symmetry. We show that the incipient band can lead to an attractive pairing interaction and thus have significant effects on the pairing symmetry. We propose a framework to include the effect of the incipient band in the standard multi-orbital spin-fluctuation theories which are widely used for studying various iron-based superconductors. Research sponsored by the Laboratory Directed Research and Development Program of Oak Ridge National Laboratory, managed by UT-Battelle, LLC, for the U. S. Department of Energy.

  2. A New MLP Approach for the Detection of the Incipient Bearing Damage

    Directory of Open Access Journals (Sweden)

    SEKER, S.

    2010-08-01

    Full Text Available In this study, it is aimed to track the aging trend of the incipient bearing damage in an induction motor which is subjected to an accelerated aging process. For this purpose, a new Multilayer perceptron (MLP neural network approach is introduced. The input signals are extracted from power spectral densities (PSD of the vibration signals taken from a 5-HP induction motor. Principal component analysis (PCA has been applied to select the best possible feature vectors as a dimensionality reduction purpose. Variance and entropy values are used as the targets of the MLP network. The healthy motor condition was modelled by the MLP network considering all load conditions. The results showed that the incipient bearing damage was clearly extracted by the oscillations of the MLP output error.

  3. Are Guidelines Needed for the Diagnosis and Management of Incipient Alzheimer's Disease and Mild Cognitive Impairment?

    Directory of Open Access Journals (Sweden)

    Katie Palmer

    2010-01-01

    Full Text Available Current research is aiming to push the boundaries of the point at which a diagnosis of Alzheimer Disease (AD can be made. Clinical syndromes such as Mild Cognitive Impairment (MCI and various clinical and biological markers of AD may help to identify people in the early stage of AD, before a full dementia syndrome is present. In the first part of this paper, we discuss whether MCI represents incipient AD, and examine some of the methods currently used in research to identify AD patients in the preclinical phase. In the second part, we discuss whether specific guidelines are needed for the diagnosis and management of MCI and incipient AD, and consider the potential impact of this on clinical practice and public health from the perspective of patients, caregivers, and healthcare providers.

  4. Early diagnosis of incipient caries based on non-invasive lasers

    Science.gov (United States)

    Velescu, A.; Todea, C.; Vitez, B.

    2016-03-01

    AIM: The aim of this study is to detect incipient caries and enamel demineralization using laser fluorescence.This serves only as an auxilary aid to identify and to monitor the development of these lesions. MATERIALS AND METHODS: 6 patients were involved in this study, three females and three male. Each patient underwent a professional cleaning, visual examination of the oral cavity, and then direct inspection using DiagnoCam and DIAGNOdent. After data recording each patient was submitted to retro-alveolar X-ray on teeth that were detected with enamel lesions. All data was collected and analyzed statistically. RESULTS: Of 36 areas considered in clinically healthy, 24 carious surfaces were found using laser fluorescence, a totally non-invasive method for detecting incipient carious lesions compared with the radiographic examination. CONCLUSIONS: This method has good applicability for patients because it improves treatment plan by early detection of caries and involves less fear for anxious patients and children.

  5. Silver impregnation in situ: an aid to radiographic interpretation

    International Nuclear Information System (INIS)

    Boyd, J.; Rantanen, N.W.

    1984-01-01

    In evaluating radiographs of the limb joints and head, students encounter difficulty where superimposition occurs. By replacing calcium with silver salts in the bone, enhanced radiopacity can be produced. In this study, silver impregnation was used to increase the radiopacity of individual carpal and tarsal bones, selected bones of the skull and the sinuses, and guttural pouch of the horse. This provides an interpretation aid for teaching radiographic anatomy of these regions

  6. Economical and technical aspects of producing of diamond impregnated tools

    OpenAIRE

    Borowiecka-Jamrozek, Joanna; Lachowski, Jan

    2013-01-01

    In the paper the analysis of dynamics of mining, production and prices of industrial diamonds and cobalt was performed during 1900-2011 years. Cobalt is using as a based material used for matrix of diamond impregnated tools for cutting of natural stones. Until the early 1950s the developments in diamond tools were relatively slow. In that period only mined diamond crystals were available. Much faster developments in the tool manufacturing technology was caused by development the production...

  7. Survey of the current state of knowledge of incipient boiling superheat in sodium

    International Nuclear Information System (INIS)

    Greer, B.

    1979-01-01

    Superheat data obtained by various investigators indicate that many parameters affect this phenomenon. Controlling parameters appear to be inert gas concentration, oxide concentration, system pressure, pressure-temperature history, rate of temperature rise, heat flux, flow rate, operating time on the system, surface conditions, and radiation. Of these, the two believed most influential in controlling incipient boiling superheat are the inert gas concentration and oxide concentration. Experimental results for the heat flux and rate of temperature rise appear to be the most inconsistent

  8. Near-infrared hyperspectral imaging of water evaporation dynamics for early detection of incipient caries.

    Science.gov (United States)

    Usenik, Peter; Bürmen, Miran; Fidler, Aleš; Pernuš, Franjo; Likar, Boštjan

    2014-10-01

    Incipient caries is characterized as demineralization of the tooth enamel reflecting in increased porosity of enamel structure. As a result, the demineralized enamel may contain increased amount of water, and exhibit different water evaporation dynamics than the sound enamel. The objective of this paper is to assess the applicability of water evaporation dynamics of sound and demineralized enamel for detection and quantification of incipient caries using near-infrared hyperspectral imaging. The time lapse of water evaporation from enamel samples with artificial and natural caries lesions of different stages was imaged by a near-infrared hyperspectral imaging system. Partial least squares regression was used to predict the water content from the acquired spectra. The water evaporation dynamics was characterized by a first order logarithmic drying model. The calculated time constants of the logarithmic drying model were used as the discriminative feature. The conducted measurements showed that demineralized enamel contains more water and exhibits significantly faster water evaporation than the sound enamel. By appropriate modelling of the water evaporation process from the enamel surface, the contrast between the sound and demineralized enamel observed in the individual near infrared spectral images can be substantially enhanced. The presented results indicate that near-infrared based prediction of water content combined with an appropriate drying model presents a strong foundation for development of novel diagnostic tools for incipient caries detection. The results of the study enhance the understanding of the water evaporation process from the sound and demineralized enamel and have significant implications for the detection of incipient caries by near-infrared hyperspectral imaging. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Study on quality improvement of palm trunk by thermoplastic impregnation

    Science.gov (United States)

    Rosli, F.; Ghazali, C. M. R.; Abdullah, M. M. A. B.; Hussin, K.

    2017-09-01

    Due to abundance of palm trunk waste, palm trunk can be used as alternative raw material of wood composites to replace future timber. However, the morphological of palm trunk is not truly woody material, so the quality improvement was studied by thermoplastic impregnation at different soaking time. The effect of thermoplastic resin impregnation on the morphological, physical and mechanical was investigated in this study. It was found that the amount of resin uptake to the palm trunk ranged from 3.85% to 6.25%. The density, thickness swelling and water absorption of treated palm trunk significantly improved. While, the modulus of rupture (MOR) and modulus of elasticity (MOE) of treated palm trunk was greater than untreated. This findings in this study indicated that thermoplastic resin would be considered alternative to formaldehyde-based resin to improved properties of palm trunk. At the request of all authors and with the approval of the proceedings editor, article 020268 titled, "Study on Quality Improvement of Palm Trunk by Thermoplastic Impregnation," is being retracted from the public record due to the fact that it is a duplication of article 020153 published in the same volume.

  10. Iodine-impregnated incision drape and bacterial recolonization in simulated total knee arthroplasty

    DEFF Research Database (Denmark)

    Milandt, Nikolaj; Nymark, Tine; Jørn Kolmos, Hans

    2016-01-01

    Background and purpose - Iodine-impregnated incision drapes (IIIDs) are used to prevent surgical site infection (SSI). However, there is some evidence to suggest a potential increase in SSI risk as a result of IIID use, possibly from promotion of skin recolonization. A greater number of viable...... bacteria in the surgical field of an arthroplasty, and surgery in general, may increase the infection risk. We investigated whether IIID use increases bacterial recolonization compared to no drape use under conditions of simulated total knee arthroplasty (TKA). Methods - 20 patients scheduled for TKA were...... recruited. Each patient had 1 knee randomized for draping with IIID, while the contralateral knee was left bare. The patients thus served as their own control. The operating room conditions and perioperative procedures of a TKA were simulated. Cylinder samples were collected from the skin of each knee prior...

  11. Acoustic Emission Monitoring of Incipient in Journal Bearings - Part I : Detectability and measurement for bearing damages

    International Nuclear Information System (INIS)

    Yoon, Dong Jin; Kwon, Oh Yang; Chung, Min Hwa; Kim, Kyung Woong

    1994-01-01

    In contrast to the machinery using rolling element bearings, systems with journal bearings generally operate in large scale and under severe loading condition such as steam generator turbines and internal combustion engines. Failure of the bearings in these machinery can result in the system breakdown. To avoid the time consuming repair and considerable economic loss, the detection of incipient failure in journal bearings becomes very important. In this experimental approach, acoustic emission monitoring is applied to the detection of incipient failure caused by several types of abnormal operating condition most probable in the journal bearing systems. It has been known that the intervention of foreign materials, insufficient lubrication and misassembly etc. are principal factors to cause bearing failure and distress. The experiment was conducted under such designed conditions as hard particles in the lubrication layer, insufficient lubrication, and metallic contact in the simulated journal bearing system. The results showed that acoustic emission could be an effective tool to detect the incipient failure in journal bearings

  12. Incipient multiple fault diagnosis in real time with applications to large-scale systems

    International Nuclear Information System (INIS)

    Chung, H.Y.; Bien, Z.; Park, J.H.; Seon, P.H.

    1994-01-01

    By using a modified signed directed graph (SDG) together with the distributed artificial neutral networks and a knowledge-based system, a method of incipient multi-fault diagnosis is presented for large-scale physical systems with complex pipes and instrumentations such as valves, actuators, sensors, and controllers. The proposed method is designed so as to (1) make a real-time incipient fault diagnosis possible for large-scale systems, (2) perform the fault diagnosis not only in the steady-state case but also in the transient case as well by using a concept of fault propagation time, which is newly adopted in the SDG model, (3) provide with highly reliable diagnosis results and explanation capability of faults diagnosed as in an expert system, and (4) diagnose the pipe damage such as leaking, break, or throttling. This method is applied for diagnosis of a pressurizer in the Kori Nuclear Power Plant (NPP) unit 2 in Korea under a transient condition, and its result is reported to show satisfactory performance of the method for the incipient multi-fault diagnosis of such a large-scale system in a real-time manner

  13. Incipient toxicity of lithium to freshwater organisms representing a salmonid habitat

    International Nuclear Information System (INIS)

    Emery, R.; Klopfer, D.C.; Skalski, J.R.

    1981-07-01

    Because the eventual development of fusion power reactors could increase the mining, use and disposal of lithium five-fold by the year 2000, potential effects from unusual amounts of lithium in aquatic environments were investigated. Freshwater oganisms representing a Pacific Northwest salmonid habitat were exposed to elevated conentrations of lithium. Nine parameters were used to determine the incipient toxicity of lithium to rainbow trout (Salmo gairdneri), insect larvae (Chironomus sp.), and Columbia River periphyton. All three groups of biota were incipiently sensitive to lithium at concentrations ranging between 0.1 and 1 mg/L. These results correspond with the incipient toxicity of beryllium, a chemically similar component of fusion reactor cores. A maximum lithium concentration of 0.01 mg/L occurs naturally in most freshwater environments (beryllium is rarer). Therefore, a concentration range of 0.01 to 0.1 mg/L may be regarded as approaching toxic concentrations when assessing the hazards of lithium in freshwaters

  14. Incipient toxicity of lithium to freshwater organisms representing a salmonid habitat

    Energy Technology Data Exchange (ETDEWEB)

    Emery, R.; Klopfer, D.C.; Skalski, J.R.

    1981-07-01

    Because the eventual development of fusion power reactors could increase the mining, use and disposal of lithium five-fold by the year 2000, potential effects from unusual amounts of lithium in aquatic environments were investigated. Freshwater oganisms representing a Pacific Northwest salmonid habitat were exposed to elevated conentrations of lithium. Nine parameters were used to determine the incipient toxicity of lithium to rainbow trout (Salmo gairdneri), insect larvae (Chironomus sp.), and Columbia River periphyton. All three groups of biota were incipiently sensitive to lithium at concentrations ranging between 0.1 and 1 mg/L. These results correspond with the incipient toxicity of beryllium, a chemically similar component of fusion reactor cores. A maximum lithium concentration of 0.01 mg/L occurs naturally in most freshwater environments (beryllium is rarer). Therefore, a concentration range of 0.01 to 0.1 mg/L may be regarded as approaching toxic concentrations when assessing the hazards of lithium in freshwaters.

  15. [Preventive and remineralization effect over incipient lesions of caries decay by phosphopeptide-amorphous calcium phosphate].

    Science.gov (United States)

    Juárez-López, María Lilia Adriana; Hernández-Palacios, Rosa Diana; Hernández-Guerrero, Juan Carlos; Jiménez-Farfán, Dolores; Molina-Frechero, Nelly

    2014-01-01

    INTRODUCTION. Dental caries continues to affect a large percentage of Mexican children and currently advises that if diagnosed at an early stage can be reversed with minimally invasive treatments. The casein phosphopeptide amorphous calcium phosphate known as CPP-ACP is a phosphoprotein capable of releasing calcium and phosphate ions in the oral environment promoting remineralization. OBJECTIVE. To evaluate the effect of CPP-ACP with fluoride added in a scholar preventive program. MATERIAL AND METHODS. A cuasi- experimental study was conducted in 104 schools of six years old. The children were classified into three groups and received six months biweekly applications of different treatments: casein phosphopeptide amorphous calcium phosphate added fluoride (CPP-ACPF), sodium fluoride (NaF) and a control group. Clinical evaluation was performed with the laser fluorescence technique (Diagnodent model 2095). 1340 teeth were included: 294 teeth with incipient lesions and 1,046 healthy teeth. Statistical tests of χ2 y Mc Nemar were used. RESULTS. In the group that received the application of CPP-ACPF, 38% of incipient carious lesions were remineralizing compared with 21% in the group receiving the NaF (p application biweekly for six months of CPP-ACPF showed a protective and remineralizing effect on incipient carious lesions. His action was better than the application of NaF. However, to reduce the impact from dental caries in schoolchildren is important to have a comprehensive preventive approach that includes promoting self-care, as well as the application of sealants.

  16. Multiple incipient sensor faults diagnosis with application to high-speed railway traction devices.

    Science.gov (United States)

    Wu, Yunkai; Jiang, Bin; Lu, Ningyun; Yang, Hao; Zhou, Yang

    2017-03-01

    This paper deals with the problem of incipient fault diagnosis for a class of Lipschitz nonlinear systems with sensor biases and explores further results of total measurable fault information residual (ToMFIR). Firstly, state and output transformations are introduced to transform the original system into two subsystems. The first subsystem is subject to system disturbances and free from sensor faults, while the second subsystem contains sensor faults but without any system disturbances. Sensor faults in the second subsystem are then formed as actuator faults by using a pseudo-actuator based approach. Since the effects of system disturbances on the residual are completely decoupled, multiple incipient sensor faults can be detected by constructing ToMFIR, and the fault detectability condition is then derived for discriminating the detectable incipient sensor faults. Further, a sliding-mode observers (SMOs) based fault isolation scheme is designed to guarantee accurate isolation of multiple sensor faults. Finally, simulation results conducted on a CRH2 high-speed railway traction device are given to demonstrate the effectiveness of the proposed approach. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

  17. 2D/3D quench simulation using ANSYS for epoxy impregnated Nb3Sn high field magnets

    Energy Technology Data Exchange (ETDEWEB)

    Ryuji Yamada et al.

    2002-09-19

    A quench program using ANSYS is developed for the high field collider magnet for three-dimensional analysis. Its computational procedure is explained. The quench program is applied to a one meter Nb{sub 3}Sn high field model magnet, which is epoxy impregnated. The quench simulation program is used to estimate the temperature and mechanical stress inside the coil as well as over the whole magnet. It is concluded that for the one meter magnet with the presented cross section and configuration, the thermal effects due to the quench is tolerable. But we need much more quench study and improvements in the design for longer magnets.

  18. Granular activated carbon with grafted nanoporous polymer enhances nanoscale zero-valent iron impregnation and water contaminant removal

    DEFF Research Database (Denmark)

    Mines, Paul D.; Uthuppu, Basil; Thirion, Damien

    2018-01-01

    Granular activated carbon was customized with a chemical grafting procedure of a nanoporous polymeric network for the purpose of nanoscale zero-valent iron impregnation and subsequent water contaminant remediation. Characterization of the prepared composite material revealed that not only...... water contaminants, nitrobenzene and nitrate, the composite material exploited the qualities of both the activated carbon and the polymeric network to work together in a synergistic manner. In that the increased protection from oxidation allowed for increased reactivity of the nanoscale zero-valent iron...

  19. Effect of autohydrolysis on the wettability, absorbility and further alkali impregnation of poplar wood chips.

    Science.gov (United States)

    Xu, Ningpan; Liu, Wei; Hou, Qingxi; Wang, Peiyun; Yao, Zhirong

    2016-09-01

    Autohydrolysis with different severity factors was performed on poplar wood chips prior to pulping, and the wettability, absorbility and the following impregnation of NaOH solution for the poplar wood chips were then investigated. The results showed that after autohydrolysis pretreatment the porosity, shrinkage and fiber saturation point (FSP) of the poplar wood chips were increased, while the surface contact angle decreased as the severity factor was increased. The autohydrolyzed chips absorbed more NaOH in impregnation that resulted in a low NaOH concentration in the bulk impregnation liquor (i.e., the impregnation liquor outside wood chips), while the concentration in the entrapped liquor (i.e., the impregnation liquor inside wood chips) was increased. Autohydrolysis substantially improved the effectiveness of alkali impregnation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Porous solid backbone impregnation for electrochemical energy conversion systems

    KAUST Repository

    Boulfrad, Samir

    2013-09-19

    An apparatus and method for impregnating a porous solid backbone. The apparatus may include a platform for holding a porous solid backbone, an ink jet nozzle configured to dispense a liquid solution onto the porous solid backbone, a positioning mechanism configured to position the ink jet nozzle proximate to a plurality of locations of the porous solid backbone, and a control unit configured to control the positioning mechanism to position the ink jet nozzle proximate to the plurality of locations and cause the ink jet nozzle to dispense the liquid solution onto the porous solid backbone.

  1. Evaluation of level of impregnation monomers in hydrotalcite

    International Nuclear Information System (INIS)

    Carmo, Danieli M. do; Machado, Jacson S.C.; Oliveira, Marcelo F.L.; Oliveira, Marcia G.; Soares, Bluma G.

    2011-01-01

    To evaluate the impregnation degree of 1,6-hexamethylene diisocyanate and 1,4-butanediol monomers in hydrotalcite clays it was prepared dispersions with mixing ratio 1:100 (clay/monomer), using the Ultraturrax and Ultrasound. Subsequently the samples were characterized by Fourier Transform Infrared Spectroscopy and X-ray Diffraction. Swelling tests and Tyndall effect were used to illustrate the different dispersions. The results indicated a strong interaction between the hydrotalcite with 1,6-hexamethylene diisocyanate, favoring the formation of intercalated structures. (author)

  2. Differences and commonalities impregnation of dry and wet sand

    Directory of Open Access Journals (Sweden)

    Maujuda МUZAFFAROVA

    2014-09-01

    Full Text Available The article is devoted to research new methods of physic-chemical methods of preventing deflation to protect railways and highways from such phenomena as exogenous sand drifts. In particular, first studied the possibility of using binders in sand wet state. Results can significantly extend the scope of the method, and identified with particular impregnation maintaining stability requirements protective cover reduces both the concentration previously recommended binders, and their costs, thereby securing implementation in practice of shifting sands resource-saving technology.

  3. Phenolic Impregnated Carbon Ablator (PICA) Gap Filler for Heat Shield Assemblies, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — During this program Fiber Materials, Inc. (FMIREG) will develop practical methods for preparing Phenolic Impregnated Carbon Ablator (PICA) materials for joining...

  4. Optical study of planar waveguides based on oxidized porous silicon impregnated with laser dyes

    Energy Technology Data Exchange (ETDEWEB)

    Chouket, A. [Unite de recherche de Spectroscopie Raman, Departement de Physique, Faculte des Sciences de Tunis, Elmanar 2092, Tunis (Tunisia); Charrier, J. [Laboratoire d' Optronique CNRS-UMR FOTON 6082, Universite de Rennes 1, ENSSAT-6 rue de Kerampont, BP 80518, 22305 Lannion Cedex (France); Elhouichet, H. [Unite de recherche de Spectroscopie Raman, Departement de Physique, Faculte des Sciences de Tunis, Elmanar 2092, Tunis (Tunisia)], E-mail: habib.elhouichet@fst.rnu.tn; Oueslati, M. [Unite de recherche de Spectroscopie Raman, Departement de Physique, Faculte des Sciences de Tunis, Elmanar 2092, Tunis (Tunisia)

    2009-05-15

    Oxidized porous silicon optical planar waveguides were elaborated and impregnated with rhodamine B and rhodamine 6G. The waveguiding, absorption, and photoluminescence properties of these impregnated waveguides were studied. Successful impregnation of the structure with laser dyes is shown from photoluminescence and reflectivity measurements. Furthermore, the reflectivity spectra prove the homogenous incorporation of both dye molecules inside the pores of the matrices. The refractive indices of waveguide layers were determined before and after dye impregnation to indicate the conservation of guiding conditions. The optical losses in the visible wavelengths are studied as a function of dye concentration. The dye absorption is the main reason for these losses.

  5. Phenolic Impregnated Carbon Ablator (PICA) Gap Filler for Heat Shield Assemblies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — During this program, Fiber Materials, Inc. (FMI) will develop practical methods for preparing Phenolic Impregnated Carbon Ablator (PICA) materials for joining...

  6. The effect of type and mixture of resin on the properties of impregnated paper

    Directory of Open Access Journals (Sweden)

    hossein Kermanian

    2017-05-01

    Full Text Available This study was carried out in order to investigate the effects of different types of resins and also their mixtures on the impregnated paper properties. In this regard, pure urea resin (100%, mixture of melamine and urea resins with various combinations (60/40 and 70/30 and 50/50, mixture of nano-fiber cellulose ratios of 1, 2 and 3 percent with urea resin and pure PVA (100% were used to impregnate of newsprint basic paper of Mazandaran wood and paper industries. Immersion of samples in the impregnation step were done in two time of 5 and 10 seconds. Next, melamine resin was used for surface coating and then absorption of resin in the impregnation and coating process measured. Results showed that in the impregnation step with pure urea (100%, in the respect of absorption rate and surface properties of melamine paper, the best time of impregnation was obtained 10 seconds. In the combined treatment, adding up to 30% melamine to urea resin, as impregnation step resin, offers better properties in terms of stain resistance, cigarette resistance, resistance to cracking and resistance to hot water steam for impregnatedmade paper. By adding nanocellulose up to 1% in impregnation resin, better properties is obtained for melamine paper. Also, PVA as impregnation resin, can be offer similar quality to pure urea in the resulting melamine papers.

  7. Defining Incipient Subduction by Detecting Serpentenised Mantle in the Regional Magnetic Field

    Science.gov (United States)

    Pires, Rui; Clark, Stuart; Reis, Rui

    2017-04-01

    Keywords: Subduction initiation, Incipient Subduction, Active Margins, Southeast Asia, Mantle wedge The mechanisms of subduction initiation are poorly understood. One idea is to look for incipient subduction zones in the present day and see what features are common in these zones. However, incipient subduction zones are very difficult to detect and debate surrounds particular cases as to whether they qualify as incipient or not. In the analysis conducted in this work, we use the signal of the presence of a mantle wedge in the magnetic anomaly field as an indicator of incipient subduction. Each subduction zone exhibits variations in the particular responses of the system, such as slab-dip angle, maximum earthquake depths and volcanism to various parameters. So far, attempts to reduce the system to a dominate controlling parameter have failed, probably as a result of the limited number of cases and the large variety of controlling parameters. Parameters such as down-going and overriding plate morphology and velocity, mantle flow, the presence of plumes or not, sediment transport into the trench are a few of the parameters that have been studied in the literature. However, one of the characteristics associated with a subduction zones is the presence of a mantelic wedge as a result of the partial melt of the subducting plate and the development of a mantle wedge between the subducting plate and the overriding plate. The wedge is characterised by the presence of water (coming from sediments in the down-going plate) as well as lower temperatures (because the wedge is between two relatively cold lithospheres). As a results a serpentinized mantle wedge is formed that contains hydrous minerals, of which magnetite is an example, that alter the composition and properties of this region. According to Blakely et.al. (2005), this region exhibits both higher magnetic susceptibility and lower densities than the surrounding medium. We analysed five active margin boundaries located

  8. Development of a custom-made "smart-sphere" to assess incipient entrainment by rolling

    Science.gov (United States)

    Valyrakis, Manousos; Kitsikoudis, Vasileios; Alexakis, Athanasios; Trinder, Jon

    2017-04-01

    The most widely applied criterion for sediment incipient motion in engineering applications is the time- and space-averaged approach of critical Shields shear stress. Nonetheless, in the recent years published research has highlighted the importance of turbulence fluctuations in sediment incipient motion and its stochastic character. The present experimental study investigates statistically the link of the response of a "smart-pebble" to hydrodynamics in near-critical flow conditions and discusses how such a device can be utilized in engineering design. A set of specifically designed fluvial experiments monitoring the entrainment conditions for a "smart-pebble", were carried out in a tilting, recirculating flume in turbulent flow conditions while three-dimensional flow measurements were obtained with an acoustic Doppler velocimeter. The "smart-pebble" employed herein is a custom-made instrumented sphere with 7 cm diameter, which has a number of sensors embedded within its waterproof 3D-printed plastic shell. Specifically, the "smart-pebble" is equipped with miniaturized, off the shelf, low-cost, three-dimensional acceleration, orientation and angular displacement sensors. A 3D-printed local micro topography of known geometry was installed in the flume's test section and the "smart-pebble" was placed there in order to facilitate the analysis. Every time the "smart-sphere" is displaced by the flow a downstream located pin blocks its full entrainment. This allows for continuous recording of the entrainment events due to the passage of energetic events, after which the "smart-pebble" returns to its resting pocket. The "smart-pebble" device under such a configuration allows the recording of normally indiscernible (with the naked eye) vibrations, twitching motions, and full entrainments for the studied particle, allowing its analysis from a Langrangian framework. During the incipient motion experiments the retrieved data are stored in an internal memory unit or

  9. Micro-topography controls on incipient motion in very steep, ephemeral streams

    Science.gov (United States)

    Scheingross, J. S.; Winchell, E. W.; Lamb, M. P.; Dietrich, W. E.

    2010-12-01

    Much of the drainage network in hilly and mountainous areas is composed of small, steep streams, and predicting incipient sediment motion in these streams is critical to modeling bedload transport, bedrock incision, and landscape evolution. While the conditions for incipient motion in low lying rivers have been well established, field measurements on initial motion in steep, mountainous streams remain sparse, and existing models remain relatively untested. To fill this knowledge gap, we monitored initial motion of sediment in six small (drainage areas of 0.05 - 2 km2) and steep (slopes of 3.5 - 35%) tributaries of the South Fork Eel River, CA. Sites were monitored for three winters from 2007 - 2010 using automated field cameras, water stage height recorders, and painted sediment. We calculated critical shear stress for grain entrainment using a number of methods including a 1D non-uniform hydraulic model (HEC-RAS), a normal flow model (i.e. τ = ρghS), and a form-drag-corrected model that accounts for immobile grains (i.e. Yager et al, 2007). In all cases, the available empirical and theoretical predictions do not adequately describe the observed transport. Furthermore, the data itself is highly scattered suggesting that the traditional non-dimensional framework used to describe incipient motion in low slope rivers (e.g. Shields number and relative grain roughness) may not adequately capture the physics of sediment transport in small, steep streams. We hypothesize that this discrepancy is due to centimeter-scale topographic variations and grain-size patchiness that appear to play an important role in controlling variations in sediment transport in these streams, especially at low-stage. Small steps and depressions within the channel bed create low-stage chutes and pools that result in highly variable flow velocities and basal shear stresses even within a single channel cross section. By changing shear stress distributions, these micro-topographic variations

  10. Antibacterial Carbon Nanotubes by Impregnation with Copper Nanostructures

    Science.gov (United States)

    Palza, Humberto; Saldias, Natalia; Arriagada, Paulo; Palma, Patricia; Sanchez, Jorge

    2017-08-01

    The addition of metal-based nanoparticles on carbon nanotubes (CNT) is a relevant method producing multifunctional materials. In this context, CNT were dispersed in an ethanol/water solution containing copper acetate for their impregnation with different copper nanostructures by either a non-thermal or a thermal post-synthesis treatment. Our simple method is based on pure CNT in an air atmosphere without any other reagents. Particles without thermal treatment were present as a well-dispersed layered copper hydroxide acetate nanostructures on CNT, as confirmed by scanning and transmission (TEM) electron microscopies, and showing a characteristic x-ray diffraction peak at 6.6°. On the other hand, by thermal post-synthesis treatment at 300°C, these layered nanostructures became Cu2O nanoparticles of around 20 nm supported on CNT, as confirmed by TEM images and x-ray diffraction peaks. These copper nanostructures present on the CNT surface rendered antibacterial behavior to the resulting hybrid materials against both Staphylococcus aureus and Escherichia coli. These findings present for the first time a simple method for producing antibacterial CNT by direct impregnation of copper nanostructures.

  11. Zinc impregnated cellulose nanocomposites: Synthesis, characterization and applications

    Science.gov (United States)

    Ali, Attarad; Ambreen, Sidra; Maqbool, Qaisar; Naz, Sania; Shams, Muhammad Fahad; Ahmad, Madiha; Phull, Abdul Rehman; Zia, Muhammad

    2016-11-01

    Nanocomposite materials have broad applicability due to synergistic effect of combined components. In present investigation, cellulose isolated from citrus peel waste is used as a supporting material; impregnation of zinc oxide nanoparticles via co-precipitation method. The characterization of nano composite is carried out through Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and Thermo-gravimetric analysis (TGA) resulting less than 10 μm cellulose fiber and approx. 50 nm ZnO NPs. Zinc oxide impregnated cellulose (ZnO-Cel) exhibited significant bacterial devastation property when compared to ZnO NPs or Cellulose via disc diffusion and colony forming unit methods. In addition, the ZnO-Cel exhibited significant total antioxidant, and minor DPPH free radical scavenging and total reducing power activities. The nano composite also showed time dependent increase in photocatalytic by effectively degrading methylene blue dye up to 69.5% under sunlight irradiation within 90 min. The results suggest effective utilization of cellulose obtained from citrus waste and synthesis of pharmacologically important nano-composites that can be exploited in wound dressing; defence against microbial attack and healing due to antioxidative property, furthermore can also be used for waste water treatment.

  12. Detecting incipient schizophrenia: a validation of the Azima battery in first episode psychosis.

    Science.gov (United States)

    Zafran, Hiba; Mazer, Barbara; Tallant, Beverlea; Chilingaryan, Gevorg; Gelinas, Isabelle

    2017-09-01

    Early psychosis intervention aims to accurately detect adolescents and young adults at risk for major mental disorders, particularly schizophrenia, yet early biomedical diagnostic accuracy remains poor. However, phenomenological approaches focusing on eliciting and understanding the subjective experience of help-seeking youth better detect incipient schizophrenia. The Azima Battery is an occupational therapy projective assessment that uses expressive media in a standard setup, in order to phenomenologically elicit and describe the activity performance and narratives of individuals at risk of, or on, the psychotic-spectrum.The purpose of this study was to estimate the predictive validity of the Azima Battery with youth seeking help for a first episode of psychosis, and identify patterns of performance distinctive of a diagnosis of schizophrenia 1-year later. A mixed methods phenomenological approach was used to calculate the predictive validity of the Azima Battery in detecting incipient schizophrenia, and to qualitatively identify patterns of performance. Study results demonstrate that the diagnostic accuracy of the Azima Battery is greater than psychiatric interviewing for a future diagnosis of schizophrenia (N = 62: 88.7 % vs 42 %). Performance elements and patterns statistically distinctive of schizophrenia are described, and relate to the structure of the created objects. Therefore, the Azima Battery is a valid measure for clinical use by occupational therapists working in early intervention for psychosis as a complement to traditional psychiatric interviewing.

  13. Evaluation of CO2 laser irradiation effect on enamel microhardness after incipient caries creation

    Directory of Open Access Journals (Sweden)

    Loghman Rezaei-Soufi

    2016-12-01

    Full Text Available Objective: The important mission in modern science of caries prevention is identification and providing the necessary actions for caries prevention to patients with an elevated risk of caries. The aim of this study was evaluation of CO2 laser irradiation effect on enamel microhardness after incipient caries creation. Material and methods: In this in vitro-experimental study, for evaluation of enamel microhardness 30 teeth after disinfection process were divided randomly into three groups A, B, C [n=10]: A] Control [normal saline] B] Immersed in cariogenic solution for 1 month C] Immersed in cariogenic solution for 1 month + CO2 laser [10.6µm, 10Hz, 0.5W, 20s, beam diameter 0.2 mm]. Data analyzing was used by 16 SPSS software. Parametric one-way ANOVA and Tukey were used for surface microhardness at 0.05% significance level. Results: According to one-way ANOVA parametric test, there was a significant difference between three groups [p=0.047]. In the following, results of Tukey test showed that there was a significant statistical difference between the microhardness of control and other groups [P=0.038]. On the other hand, there wasn’t statistical difference between A, C and B, C group means [P>0.05]. Conclusion: These study findings showed that CO2 laser irradiation on enamel surface with incipient caries had no significant effect on surface microhardness enhancement.

  14. Velocity-based analysis of sediment incipient deposition in rigid boundary open channels.

    Science.gov (United States)

    Aksoy, Hafzullah; Safari, Mir Jafar Sadegh; Unal, Necati Erdem; Mohammadi, Mirali

    2017-11-01

    Drainage systems must be designed in a way to minimize undesired problems such as decrease in hydraulic capacity of the channel, blockage and transport of pollutants due to deposition of sediment. Channel design considering self-cleansing criteria are used to solve the sedimentation problem. Incipient deposition is one of the non-deposition self-cleansing design criteria that can be used as a conservative method for channel design. Experimental studies have been carried out in five different cross-section channels, namely trapezoidal, rectangular, circular, U-shape and V-bottom. Experiments were performed in a tilting flume using four different sizes of sands as sediment in nine different channel bed slopes. Two well-known methods, namely the Novak & Nalluri and Yang methods are considered for the analysis of sediment motion. Equations developed using experimental data are found to be in agreement with the literature. It is concluded that the design velocity depends on the shape of the channel cross-section. Rectangular and V-bottom channels need lower and higher incipient deposition velocities, respectively, in comparison with other channels.

  15. Evaluation of diagnostic ability of CCD digital radiography in the detection of incipient dental caries

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Wan; Lee, Byung Do [Wonkwang University College of Medicine, Iksan (Korea, Republic of)

    2003-03-15

    The purpose of this experiment was to evaluate the diagnostic ability of a CCD-based digital system (CDX-2000HQ) in the detection of incipient dental caries. 93 extracted human teeth with sound proximal surfaces and interproximal artificial cavities were radiographed using 4 imaging methods. Automatically processed No.2 Insight film (Eastman Kodak Co., U.S.A.) was used for conventional radiography, scanned images of conventional radiograms for indirect digital radiography were used. For the direct digital radiography, the CDX-2000HQ CCD system (Biomedisys Co. Korea) was used. The subtraction images were made from two direct digital images by Sunny program in the CDX-2000HQ system. Two radiologists and three endodontists examined the presence of lesions using a five-point confidence scale and compared the diagnostic ability by ROC (Receiver Operating Characteristic) analysis and one way ANOVA test. The mean ROC areas of conventional radiography, indirect digital radiography, direct digital radiography, and digital subtraction radiography were 0.9093, 0.9102, 0.9184, and 0.9056, respectively. The diagnostic ability of direct digital radiography was better than the other imaging modalities, but there were no statistical differences among these imaging modalities (p>0.05). These results indicate that new CCD-based digital systems (CDX-2000HQ) have the potential to serve as an alternative to conventional radiography in the detection of incipient dental caries.

  16. Adaptive divergence with gene flow in incipient speciation of Miscanthus floridulus / sinensis complex (Poaceae)

    KAUST Repository

    Huang, Chao-Li

    2014-11-11

    Young incipient species provide ideal materials for untangling the process of ecological speciation in the presence of gene flow. The Miscanthus floridulus/sinensis complex exhibits diverse phenotypic and ecological differences despite recent divergence (approximately 1.59million years ago). To elucidate the process of genetic differentiation during early stages of ecological speciation, we analyzed genomic divergence in the Miscanthus complex using 72 randomly selected genes from a newly assembled transcriptome. In this study, rampant gene flow was detected between species, estimated as M=3.36x10(-9) to 1.20x10(-6), resulting in contradicting phylogenies across loci. Nevertheless, beast analyses revealed the species identity and the effects of extrinsic cohesive forces that counteracted the non-stop introgression. As expected, early in speciation with gene flow, only 3-13 loci were highly diverged; two to five outliers (approximately 2.78-6.94% of the genome) were characterized by strong linkage disequilibrium, and asymmetrically distributed among ecotypes, indicating footprints of diversifying selection. In conclusion, ecological speciation of incipient species of Miscanthus probably followed the parapatric model, whereas allopatric speciation cannot be completely ruled out, especially between the geographically isolated northern and southern M.sinensis, for which no significant gene flow across oceanic barriers was detected. Divergence between local ecotypes in early-stage speciation began at a few genomic regions under the influence of natural selection and divergence hitchhiking that overcame gene flow.

  17. Evaluation of diagnostic ability of CCD digital radiography in the detection of incipient dental caries

    International Nuclear Information System (INIS)

    Lee, Wan; Lee, Byung Do

    2003-01-01

    The purpose of this experiment was to evaluate the diagnostic ability of a CCD-based digital system (CDX-2000HQ) in the detection of incipient dental caries. 93 extracted human teeth with sound proximal surfaces and interproximal artificial cavities were radiographed using 4 imaging methods. Automatically processed No.2 Insight film (Eastman Kodak Co., U.S.A.) was used for conventional radiography, scanned images of conventional radiograms for indirect digital radiography were used. For the direct digital radiography, the CDX-2000HQ CCD system (Biomedisys Co. Korea) was used. The subtraction images were made from two direct digital images by Sunny program in the CDX-2000HQ system. Two radiologists and three endodontists examined the presence of lesions using a five-point confidence scale and compared the diagnostic ability by ROC (Receiver Operating Characteristic) analysis and one way ANOVA test. The mean ROC areas of conventional radiography, indirect digital radiography, direct digital radiography, and digital subtraction radiography were 0.9093, 0.9102, 0.9184, and 0.9056, respectively. The diagnostic ability of direct digital radiography was better than the other imaging modalities, but there were no statistical differences among these imaging modalities (p>0.05). These results indicate that new CCD-based digital systems (CDX-2000HQ) have the potential to serve as an alternative to conventional radiography in the detection of incipient dental caries.

  18. Ecosystem Composition Controls the Fate of Rare Earth Elements during Incipient Soil Genesis

    Science.gov (United States)

    Zaharescu, Dragos G.; Burghelea, Carmen I.; Dontsova, Katerina; Presler, Jennifer K.; Maier, Raina M.; Huxman, Travis; Domanik, Kenneth J.; Hunt, Edward A.; Amistadi, Mary K.; Gaddis, Emily E.; Palacios-Menendez, Maria A.; Vaquera-Ibarra, Maria O.; Chorover, Jon

    2017-02-01

    The rare earth elements (REE) are increasingly important in a variety of science and economic fields, including (bio)geosciences, paleoecology, astrobiology, and mining. However, REE distribution in early rock-microbe-plant systems has remained elusive. We tested the hypothesis that REE mass-partitioning during incipient weathering of basalt, rhyolite, granite and schist depends on the activity of microbes, vascular plants (Buffalo grass), and arbuscular mycorrhiza. Pore-water element abundances revealed a rapid transition from abiotic to biotic signatures of weathering, the latter associated with smaller aqueous loss and larger plant uptake. Abiotic dissolution was 39% of total denudation in plant-microbes-mycorrhiza treatment. Microbes incremented denudation, particularly in rhyolite, and this resulted in decreased bioavailable solid pools in this rock. Total mobilization (aqueous + uptake) was ten times greater in planted compared to abiotic treatments, REE masses in plant generally exceeding those in water. Larger plants increased bioavailable solid pools, consistent with enhanced soil genesis. Mycorrhiza generally had a positive effect on total mobilization. The main mechanism behind incipient REE weathering was carbonation enhanced by biotic respiration, the denudation patterns being largely dictated by mineralogy. A consistent biotic signature was observed in La:phosphate and mobilization: solid pool ratios, and in the pattern of denudation and uptake.

  19. Apple snack enriched with L-arginine using vacuum impregnation/ohmic heating technology.

    Science.gov (United States)

    Moreno, Jorge; Echeverria, Julian; Silva, Andrea; Escudero, Andrea; Petzold, Guillermo; Mella, Karla; Escudero, Carlos

    2017-07-01

    Modern life has created a high demand for functional food, and in this context, emerging technologies such as vacuum impregnation and ohmic heating have been applied to generate functional foods. The aim of this research was to enrich the content of the semi-essential amino acid L-arginine in apple cubes using vacuum impregnation, conventional heating, and ohmic heating. Additionally, combined vacuum impregnation/conventional heating and vacuum impregnation/ohmic heating treatments were evaluated. The above treatments were applied at 30, 40 and 50  ℃ and combined with air-drying at 40 ℃ in order to obtain an apple snack rich in L-arginine. Both the impregnation kinetics of L-arginine and sample color were evaluated. The impregnated samples created using vacuum impregnation/ohmic heating at 50 ℃ presented a high content of L-arginine, an effect attributed primarily to electropermeabilization. Overall, vacuum impregnation/ohmic heating treatment at 50 ℃, followed by drying at 40 ℃, was the best process for obtaining an apple snack rich in L-arginine.

  20. Impacts of impregnation with boric acid and borax on the red colour ...

    African Journals Online (AJOL)

    Impacts of impregnation with boric acid and borax on the red colour tone of some hardwoods and varnishes. H Keskin, M Atar, A Ketizmen. Abstract. This study was performed to determine the impacts of impregnation with boric acid and borax on the red colour tone of some hardwoods and varnishes. For this purpose, the ...

  1. The edible cocktail: the effect of sugar and alcohol impregnation on the crunchiness of fruit

    Directory of Open Access Journals (Sweden)

    Scholten Elke

    2012-06-01

    Full Text Available Abstract Background Vacuum impregnation is seen as a valuable technique for flavor pairing in the catering industry. One of the applications of this technique is the creation of edible cocktails by impregnating fruits with liquors, leading to an interplay of different flavors. However, the effect of the impregnation of sugar and alcohol into the fruit will affect the texture of the fruit and therefore its crunchiness. Thus, the positive effect of flavor pairing might be inhibited by a negative effect in texture changes. Results This investigation focused on the change in crunchiness as a result of the impregnation of different sugar and alcohol containing solutions. When hypotonic solutions were used, the impregnation resulted in the rupture of the cells, thereby leading to a decrease in crunchiness. When hypertonic solutions were used, the cells shrunk, which also resulted in a decrease in crunchiness. Isotonic solutions resulted in crunchiness comparable to its fresh version. When alcohol was used, the crunchiness decreased at all concentrations investigated. Conclusions Crunchiness of fruit can only be maintained when impregnated with isotonic sugar solutions. When the sugar or alcohol content deviates from that in the fruit, impregnation of these liquids will lead to a decrease in crunchiness. This has consequences for the creation of edible cocktails: for an optimal crunchiness, the sugar content of the impregnation liquid has to be equal to the sugar content of the fruit or vegetable.

  2. Conservation experiments applying radiation-curable impregnating agents to intact and artifically decayed wood samples

    International Nuclear Information System (INIS)

    Schaudy, R.; Slais, E.

    1983-02-01

    Conservation experiments have been performed applying 10 selected impregnating agents to intact and chemically as well as biologically decayed wood samples. The quality of the radiation-curable impregnating agents could be valued by determination of the monomer uptake, the alteration of dimensions and volume and the deformation of the samples. The results are to be discussed. (Author) [de

  3. Biomonitoring in wearers of permethrin impregnated battle dress uniforms in Afghanistan and Germany.

    Science.gov (United States)

    Kegel, Peter; Letzel, Stephan; Rossbach, Bernd

    2014-02-01

    To analyse differences in uptake of the insecticide permethrin in wearers of non-impregnated and permethrin impregnated battle dress uniforms (BDU) in Afghanistan and Germany. In two separate studies, in April 2003-January 2004 (study I, n=549) and in February-April 2005 (study II, n=195), healthy female and male members of the German Federal Armed Forces were equipped with permethrin impregnated BDU (two sub-cohorts in Germany and one in Afghanistan) while members equipped with non-impregnated uniforms served as a control group. Human biomonitoring was conducted before, during and after wearing the uniforms by measuring permethrin metabolites in urine samples via GC-MS. Subjects of the Afghan and German control groups had permethrin levels in the range of the German general population. In contrast, subjects wearing impregnated BDU had about 200-fold higher exposure levels. Within this group, subjects located in Afghanistan and smokers had significantly higher exposure levels. Internal exposure decreased with increasing duration of use of impregnated BDU. There is no evidence for a higher background permethrin contamination in military bases located in Afghanistan compared to Germany. Daily use of permethrin impregnated BDU is associated with significantly higher permethrin uptake compared to the general population. Hand-mouth contact by smoking can increase uptake which also seems to be influenced by the duration of use of impregnated BDU.

  4. An in vitro Method for Predicting Inhalation Toxicity of Impregnation Spray Products

    DEFF Research Database (Denmark)

    Sørli, Jorid B.; Hansen, Jitka S.; Nørgaard, Asger Wisti

    2015-01-01

    Impregnation spray products are used for making surfaces water and dirt repellent. The products are composed of one or more active film-forming components dissolved or suspended in an appropriate solvent mixture. Exposure to impregnation spray products may cause respiratory distress and new cases...

  5. Characterization of impregnated GDC nano structures and their functionality in LSM based cathodes

    DEFF Research Database (Denmark)

    Klemensø, Trine; Chatzichristodoulou, Christodoulos; Nielsen, Jimmi

    2012-01-01

    Porous composite cathodes of LSM–YSZ (lanthanum strontium manganite and yttria stabilized zirconia) were impregnated with GDC (gadolinia doped ceria) nano particles. The impregnation process was varied using none or different surfactants (Triton X-45, Triton X-100, P123), and the quantity...

  6. Impregnated Metal-Organic Frameworks for the Removal of Toxic Industrial Chemicals

    Science.gov (United States)

    2008-11-01

    enhance reactivity towards toxic chemicals. Typical impregnations of current materials, such as ASZM-TEDA, are done in an aqueous and/or ammoniacal ...ammonium hydroxide/ammonium carbonate/water solution (referred to as ammoniacal solution). Clearly, this solution would not be suitable for impregnation

  7. Impregnation of a glass fibre roving with a polypropylene melt in a pin assisted process

    NARCIS (Netherlands)

    Gaymans, R.J.; Wevers, E.

    1998-01-01

    The impregnation of a glass fibre bundle with a polypropylene (PP) melt is studied with a pin assisted process. A fibre is pulled over a pin, which is positioned in a chamber filled with a melt. The melt is at atmospheric pressure. The impregnation rate is studied as a function of size of the pin,

  8. Acute and long-term effect of antihypertensive treatment on exercise-induced albuminuria in incipient diabetic nephropathy

    DEFF Research Database (Denmark)

    Christensen, Cramer; Mogensen, C E

    1986-01-01

    . In the acute study, using placebo/metoprolol 10 mg i.v. in patients with normal UAE, the maximal SBP at 600 kpm/min was reduced by 17 mmHg +/- 10 (SD) (2p less than 1.0%) and the maximal SBP at 600 kpm/min in the patients with incipient nephropathy was reduced by 15 mmHg +/- 11 (SD) (2p less than 1.......0%). However, no difference was observed in UAE, in patients with normal UAE or those with incipient nephropathy. Five of the patients with incipient nephropathy were followed with repeated exercise tests before and during 2.6 years of antihypertensive treatment, using metoprolol 200 mg/24 h and subsequently...

  9. Adsorption isotherms for cesium ions in seawater of insoluble cobalt and nickel ferrocyanide-impregnated fibers

    International Nuclear Information System (INIS)

    Amakai, Wataru; Sugiyama, Mai; Fujiwara, Kunio; Umeno, Daisuke; Saito, Kyoichi; Sugo, Takanobu

    2014-01-01

    Cobalt or nickel ferrocyanide was impregnated into an anion-exchange polymer chain grafted onto a commercially available 6-nylon fiber. First, ferrocyanide ions (Fe(CN) 6 4- ) were bound to the anion-exchange fiber. Second, the fiber was made to reach with cobalt or nickel ions to form insoluble cobalt or nickel ferrocyanide via precipitation. For comparison, a commercially available anion-exchange bead was used as a support for the impregnation of insoluble cobalt or nickel ferrocyanide. The contents of metal ferrocyanides impregnated onto the fiber were approximately half those impregnated onto the bead. Adsorption isotherms of insoluble cobalt or nickel ferro-cyanide-impregnated fiber and bead for cesium ions in seawater correlated well with a Langmuir-type isotherm. The saturation capacity for cesium ions in seawater per gram of insoluble metal ferrocyanides was almost identical between the fiber and the bead. (author)

  10. STUDY ADSORPTION DESORPTION OF MANGANESE(II USING IMPREGNATED CHITIN-CELLULOSE AS ADSORBENT

    Directory of Open Access Journals (Sweden)

    Aldes Lesbani

    2015-03-01

    Full Text Available Abstract- Study adsorption desorption of manganese(II using impregnated chitin-cellulose as adsorbent has been carried out. Chitin was extracted from snail shell and cellulose isolated from rice straw. Chitin and cellulose were impregnated using thiourea as impregnant agent. Characterization of chitin and cellulose was performed using FTIR spectroscopy, determination of water content, and ash content, while impregnated chitin-cellulose was characterized using FTIR spectrophotometer and X-Ray diffractometer. The adsorption of Mn(II on impregnated chitin-cellulose was studied through determination of adsorption time and the influence of Mn(II concentration, while desorption was carried out sequentially using various reagents. The results shown that chitin and cellulose from extraction processes are has similar FTIR spectrum compared to chitin and cellulose standard. The FTIR spectrum of impregnated chitin-cellulose shows both vibration of chitin and cellulose appeared and indicated successfully impregnate. These results were also equal to XRD pattern analysis. The water and ash contents of chitin are 0.038% and 0.043 while for cellulose are 0.184% and 0.165%, respectively. The adsorption of Mn(II on chitin and cellulose are quite similar kinetically, while adsorption of Mn(II on impregnated chitin-cellulose is higher at the same time with chitin and cellulose. In the low concentration of Mn(II, adsorption phenomena are similar on chitin, cellulose, and impregnated chitin-cellulose. Desorption process of Mn(II on the adsorbents shows sodium etilenediamine tetra acetate able to desorp Mn(II up to 68% higher than other reagents. Keywords: Manganese(II, Chitin, Cellulose, Impregnated Chitin-Cellulose

  11. Review of candidate methods for detecting incipient defects due to aging of installed cables in nuclear power plants

    International Nuclear Information System (INIS)

    Martzloff, F.D.

    1988-01-01

    Several types of test methods have been proposed for detecting incipient defects due to aging in cable insulation systems, none offering certainty of detecting all possible types of defects. Some methods apply direct detection of a defect in the cable; other methods detect changes in electrical or non-electrical parameters from which inference can be drawn on the integrity of the cable. The paper summarizes the first year of a program conducted at the National Bureau of Standards to assess the potential of success for in situ detection of incipient defects by the most promising of these methods

  12. Antimicrobial activity of silver nanoparticles impregnated wound dressing

    Science.gov (United States)

    Shinde, V. V.; Jadhav, P. R.; Patil, P. S.

    2013-06-01

    In this work, silver nanoparticles were synthesized by simple wet chemical reduction method. The silver nitrate was reduced by Sodium borohydride used as reducing agent and Poly (vinyl pyrrolidone) (PVP) as stabilizing agent. The formation of silver nanoparticles was evaluated by UV-visible spectroscope and transmission electron microscope (TEM). Absorption spectrum consist two plasmon peaks at 410 and 668 nm revels the formation of anisotropic nanoparticles confirmed by TEM. The formation of silver nanoparticles was also evidenced by dynamic light scattering (DLS) study. DLS showed polydisperse silver nanoparticles with hydrodynamic size 32 nm. Protecting mechanism of PVP was manifested by FT-Raman study. Silver nanoparticles were impregnated into wound dressing by sonochemical method. The Kirby-Bauer disc diffusion methods were used for antimicrobial susceptibility testing. The antimicrobial activity of the samples has been tested against gram-negative bacterium Escherichia coli and gram-positive bacterium Staphylococcus aureus.

  13. Impregnation of silver nanoparticles into polysaccharide substrates and their properties.

    Science.gov (United States)

    Hassabo, Ahmed G; Nada, Ahmed A; Ibrahim, Hassan M; Abou-Zeid, N Y

    2015-05-20

    A method to impregnate silver nanoparticles (AgNPs) into different polysaccharides substrates (cellulose powder (CP), microcrystalline cellulose (MCC), carboxymethyl cellulose (CMC) and chitosan (Chit)) by using glucose as reducing agent, is presented. X-ray diffraction analyses of polysaccharides coated with AgNPs showed the formation of silver particle sizes in the range of 3.7-5.6 nm and have almost spherical shape. The entire prepared composite shows antimicrobial effect. The antibacterial activity of polysaccharides loaded with silver nanoparticles was evaluated against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) bacteria. The results suggest excellent antibacterial activity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Antibiotic impregnated total femur spacers: a technical tip

    Directory of Open Access Journals (Sweden)

    Colin D. Canham, MD

    2018-03-01

    Full Text Available Simultaneous prosthetic joint infection of ipsilateral hip and knee arthroplasties is often accompanied by significant bone loss and presents a challenging reconstructive problem. Two-stage reconstruction is favored and requires the placement of a total femur spacer, which is not a commercially available device. We describe a surgical technique, reporting on 2 cases in which a customized total femur antibiotic impregnated spacer was created by combining an articulating knee spacer and an articulating hip spacer with a reinforced cement dowel construct connecting the 2 spacers. Custom total femoral spacers are useful in the management of infected femoral megaprostheses and cases with ipsilateral injected hip and knee arthroplasties and severe femoral bone loss. Keywords: total femur spacer, revision arthroplasty, total hip arthroplasty, total knee arthroplasty, prosthetic joint infection

  15. Preparation of Highly Conductive Yarns by an Optimized Impregnation Process

    Science.gov (United States)

    Amba Sankar, K. N.; Mohanta, Kallol

    2018-03-01

    We report the development of the electrical conductivity in textile yarns through impregnation and post-treatment of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The conductive polymer is deposited on fibers, which fills the gap space within the hierarchical structure of the yarns. Organic nonpolar solvents act as reducing agent to increase the density of PEDOT moieties on the yarns, galvanizing increment in conductivity values. Post-treatment by ethylene glycol transforms the resonance configuration of the conductive moieties of conjugated polymer, which helps in further enhancement of electrical conductivity of the yarns. We have optimized the method in terms of loading and conformal change of the polymer to have a lesser resistance of the coated conductive yarns. The minimum resistance achieved has a value of 77 Ωcm-1. This technique of developing conductivity in conventional yarns enables retaining the flexibility of yarns and feeling of softness which would find suitable␣applications for wearable electronics.

  16. Experimental Constraints on Fluid-Rock Reactions during Incipient Serpentinization of Harzburgite

    Science.gov (United States)

    Klein, F.; Grozeva, N. G.; Seewald, J.; McCollom, T. M.; Humphris, S. E.; Moskowitz, B. M.; Berquo, T. S.; Kahl, W. A.

    2014-12-01

    The exposure of mantle peridotite to water at crustal levels leads to a cascade of interconnected dissolution-precipitation and reduction-oxidation reactions - a process referred to as serpentinization. These reactions have major implications for microbial life through the provision of hydrogen (H2). To simulate incipient serpentinization and the release of H2 under well-constrained conditions, we reacted uncrushed harzburgite with chemically modified seawater at 300°C and 35 MPa for ca. 1.5 years (13441 hours), monitored changes in fluid chemistry over time, and examined the secondary mineralogy at the termination of the experiment. Approximately 4 mol % of the protolith underwent alteration forming serpentine, accessory magnetite, chlorite, and traces of calcite and heazlewoodite. Alteration textures bear remarkable similarities to those found in partially serpentinized abyssal peridotites. Neither brucite nor talc precipitated during the experiment. Given that the starting material contained ~3.8 times more olivine than orthopyroxene on a molar basis, mass balance requires that dissolution of orthopyroxene was significantly faster than dissolution of olivine. However, the H2 release rate was not uniform, slowing from ~2 nmol H2(aq) gperidotite-1 s-1 at the beginning of the experiment to ~0.2 nmol H2(aq) gperidotite-1 s-1 at its termination. Serpentinization consumed water but did not release significant amounts of dissolved species (other than H2) suggesting that incipient hydration reactions involved a volume increase of ~40%. The reduced access of water to olivine surfaces due to filling of fractures and coating of primary minerals with alteration products led to decreased rates of serpentinization and H2 release. While this concept might seem at odds with completely serpentinized seafloor peridotites, reaction-driven fracturing offers an intriguing solution to the seemingly self-limiting nature of serpentinization. Indeed, the reacted sample revealed a

  17. Resin screening for the removal of pyridine-derivatives from waste-water by solvent impregnated resin technology

    NARCIS (Netherlands)

    Bokhove, J.; Schuur, Boelo; de Haan, A.B.

    2013-01-01

    The selective removal of pyridine derivatives by solvent impregnated resins has been studied. A solvent impregnated resin consists of a macro-porous particle that is impregnated with a solvent. This technology allows the use liquid–liquid extraction in fixed-bed operation, and prevents problems like

  18. White coat hypertension in NIDDM patients with and without incipient and overt diabetic nephropathy

    DEFF Research Database (Denmark)

    Nielsen, F S; Gaede, P; Vedel, P

    1997-01-01

    OBJECTIVE: Early data have suggested a high prevalence of white coat hypertension (approximately 50%) in NIDDM patients. To study this phenomenon further, we determined the prevalence of white coat hypertension in NIDDM patients with normo- or microalbuminuria or with diabetic nephropathy. RESEARCH...... DESIGN AND METHODS: Three groups of hypertensive NIDDM patients (repeated clinic blood pressure > 140/90 mmHg or antihypertensive treatment) attending the Steno Diabetes Center were investigated in a cross-sectional study. Group 1 had normoalbuminuria (a urinary albumin excretion [UAE] rate ... in normoalbuminuric NIDDM patients resembles that observed in nondiabetic subjects with essential hypertension, whereas the prevalence is significantly lower in NIDDM patients with incipient or overt diabetic nephropathy, suggesting a difference between primary and secondary hypertension....

  19. Monitoring kidney function in type 2 diabetic patients with incipient and overt diabetic nephropathy

    DEFF Research Database (Denmark)

    Rossing, Peter; Rossing, Kasper; Gaede, Peter

    2006-01-01

    -EDTA. RESEARCH DESIGN AND METHODS: We followed a cohort of 156 microalbuminuric type 2 diabetic patients for 8 years with four measurements of GFR and another cohort of 227 type 2 diabetic patients with overt diabetic nephropathy for 6.5 (range 3-17) years with seven (3-22) measurements of GFR. RESULTS...... is also significantly underestimated with both equations. This makes GFR estimations based upon these equations unacceptable for monitoring kidney function in type 2 diabetic patients with incipient and overt diabetic nephropathy.......OBJECTIVE: The purpose of this study was to assess agreement between glomerular filtration rate (GFR) and the decline in GFR estimated with the Modification of Diet in Renal Disease (MDRD) Study Group equation or the Cockcroft-Gault formula and measured by the plasma clearance of 51Cr...

  20. Incipient ferroelectricity of water molecules confined to nano-channels of beryl

    Science.gov (United States)

    Gorshunov, B. P.; Torgashev, V. I.; Zhukova, E. S.; Thomas, V. G.; Belyanchikov, M. A.; Kadlec, C.; Kadlec, F.; Savinov, M.; Ostapchuk, T.; Petzelt, J.; Prokleška, J.; Tomas, P. V.; Pestrjakov, E. V.; Fursenko, D. A.; Shakurov, G. S.; Prokhorov, A. S.; Gorelik, V. S.; Kadyrov, L. S.; Uskov, V. V.; Kremer, R. K.; Dressel, M.

    2016-09-01

    Water is characterized by large molecular electric dipole moments and strong interactions between molecules; however, hydrogen bonds screen the dipole-dipole coupling and suppress the ferroelectric order. The situation changes drastically when water is confined: in this case ordering of the molecular dipoles has been predicted, but never unambiguously detected experimentally. In the present study we place separate H2O molecules in the structural channels of a beryl single crystal so that they are located far enough to prevent hydrogen bonding, but close enough to keep the dipole-dipole interaction, resulting in incipient ferroelectricity in the water molecular subsystem. We observe a ferroelectric soft mode that causes Curie-Weiss behaviour of the static permittivity, which saturates below 10 K due to quantum fluctuations. The ferroelectricity of water molecules may play a key role in the functioning of biological systems and find applications in fuel and memory cells, light emitters and other nanoscale electronic devices.

  1. White coat hypertension in NIDDM patients with and without incipient and overt diabetic nephropathy

    DEFF Research Database (Denmark)

    Nielsen, F S; Gaede, P; Vedel, P

    1997-01-01

    in normoalbuminuric NIDDM patients resembles that observed in nondiabetic subjects with essential hypertension, whereas the prevalence is significantly lower in NIDDM patients with incipient or overt diabetic nephropathy, suggesting a difference between primary and secondary hypertension.......OBJECTIVE: Early data have suggested a high prevalence of white coat hypertension (approximately 50%) in NIDDM patients. To study this phenomenon further, we determined the prevalence of white coat hypertension in NIDDM patients with normo- or microalbuminuria or with diabetic nephropathy. RESEARCH...... DESIGN AND METHODS: Three groups of hypertensive NIDDM patients (repeated clinic blood pressure > 140/90 mmHg or antihypertensive treatment) attending the Steno Diabetes Center were investigated in a cross-sectional study. Group 1 had normoalbuminuria (a urinary albumin excretion [UAE] rate

  2. Radiographic diagnosis of incipient proximal caries: an ex-vivo study.

    Science.gov (United States)

    da Silva Neto, José Moreira; dos Santos, Rosenês Lima; Sampaio, Maria Carmeli Correia; Sampaio, Fábio Correia; Passos, Isabela Albuquerque

    2008-01-01

    The aim of this ex vivo study was to compare visual clinical and radiographic examinations to the histological analysis for proximal caries diagnosis in extracted permanent molars and premolars. The relationship between clinical aspects and carious lesions was also evaluated. Eighty-eight proximal surfaces (44 freshly extracted teeth) were longitudinally sectioned with a 370-microm diamond disk, thinned with wet silicon carbide paper and observed with a stereomicroscope at x40 magnification. Sensitivity and specificity were 65.6% and 83.3% for clinical examination and 29.7% and 95.8% for radiographic examination, respectively. Kappa values ranged from 0.64 to 0.91. The white spots corresponded to lesions restricted to enamel, while the dark spots corresponded to lesions that reached the dentinoenamel junction. In most cases, cavitation corresponded to dentin lesions. It may be concluded that interproximal radiographic examination is not a reliable method for detection of incipient proximal carious lesions.

  3. Preparation and Properties of Moisture-absorbing Film Impregnated with Polyacrylic Acid Partial Sodium Salt Material

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Youn Suk; Park, Insik [Yonsei University, Wonju (Korea, Republic of); Choi, Hong Yeol [CJ Cheiljedang, Seoul (Korea, Republic of)

    2014-08-15

    Moisture is a major factor causing the deteriorative physical change, microbial growth, and chemical reaction of the products. In this study, the moisture absorbing composite films have been prepared with moisture absorbing material of polyacrylic acid partial sodium salt (PAPSS) impregnated on LLDPE polymer for the functional packaging applications. The results showed that PAPSS impregnated film illustrated uniformly dispersed PAPSS particles in the LLDPE polymer matrix. The transparency of the PAPSS impregnated film decreased slightly at higher PAPSS concentrations. An increase in the PAPSS content for moisture-absorbing films showed a similar decrease in tensile strength, percent elongation at break, and tear strength. Their values of films impregnated with PAPSS of 0.5, 1, and 2% showed no significant difference. Meanwhile, 4% PAPSS films significantly decreased the values of mechanical properties compared to the films impregnated with different PAPSS levels. Values of the oxygen permeability and water vapor permeability for PAPSS impregnated films decreased significantly with greater PAPSS. The results indicate that 4% PAPSS impregnated in LLDPE films had high affinity of moisture absorbencies compared to the other films. The mathematical equation that best described the moisture sorption isotherm of each film sample was the GAB equation at 25 .deg. C. The crystallization and melting temperatures of PAPSS films were influenced by the addition of PAPSS material, but showed good thermal stability.

  4. Preparation and Properties of Moisture-absorbing Film Impregnated with Polyacrylic Acid Partial Sodium Salt Material

    International Nuclear Information System (INIS)

    Lee, Youn Suk; Park, Insik; Choi, Hong Yeol

    2014-01-01

    Moisture is a major factor causing the deteriorative physical change, microbial growth, and chemical reaction of the products. In this study, the moisture absorbing composite films have been prepared with moisture absorbing material of polyacrylic acid partial sodium salt (PAPSS) impregnated on LLDPE polymer for the functional packaging applications. The results showed that PAPSS impregnated film illustrated uniformly dispersed PAPSS particles in the LLDPE polymer matrix. The transparency of the PAPSS impregnated film decreased slightly at higher PAPSS concentrations. An increase in the PAPSS content for moisture-absorbing films showed a similar decrease in tensile strength, percent elongation at break, and tear strength. Their values of films impregnated with PAPSS of 0.5, 1, and 2% showed no significant difference. Meanwhile, 4% PAPSS films significantly decreased the values of mechanical properties compared to the films impregnated with different PAPSS levels. Values of the oxygen permeability and water vapor permeability for PAPSS impregnated films decreased significantly with greater PAPSS. The results indicate that 4% PAPSS impregnated in LLDPE films had high affinity of moisture absorbencies compared to the other films. The mathematical equation that best described the moisture sorption isotherm of each film sample was the GAB equation at 25 .deg. C. The crystallization and melting temperatures of PAPSS films were influenced by the addition of PAPSS material, but showed good thermal stability

  5. Incipient Social Groups: An Analysis via In-Vivo Behavioral Tracking.

    Directory of Open Access Journals (Sweden)

    Jamin Halberstadt

    Full Text Available Social psychology is fundamentally the study of individuals in groups, yet there remain basic unanswered questions about group formation, structure, and change. We argue that the problem is methodological. Until recently, there was no way to track who was interacting with whom with anything approximating valid resolution and scale. In the current study we describe a new method that applies recent advances in image-based tracking to study incipient group formation and evolution with experimental precision and control. In this method, which we term "in vivo behavioral tracking," we track individuals' movements with a high definition video camera mounted atop a large field laboratory. We report results of an initial study that quantifies the composition, structure, and size of the incipient groups. We also apply in-vivo spatial tracking to study participants' tendency to cooperate as a function of their embeddedness in those crowds. We find that participants form groups of seven on average, are more likely to approach others of similar attractiveness and (to a lesser extent gender, and that participants' gender and attractiveness are both associated with their proximity to the spatial center of groups (such that women and attractive individuals are more likely than men and unattractive individuals to end up in the center of their groups. Furthermore, participants' proximity to others early in the study predicted the effort they exerted in a subsequent cooperative task, suggesting that submergence in a crowd may predict social loafing. We conclude that in vivo behavioral tracking is a uniquely powerful new tool for answering longstanding, fundamental questions about group dynamics.

  6. Incipient Social Groups: An Analysis via In-Vivo Behavioral Tracking.

    Science.gov (United States)

    Halberstadt, Jamin; Jackson, Joshua Conrad; Bilkey, David; Jong, Jonathan; Whitehouse, Harvey; McNaughton, Craig; Zollmann, Stefanie

    2016-01-01

    Social psychology is fundamentally the study of individuals in groups, yet there remain basic unanswered questions about group formation, structure, and change. We argue that the problem is methodological. Until recently, there was no way to track who was interacting with whom with anything approximating valid resolution and scale. In the current study we describe a new method that applies recent advances in image-based tracking to study incipient group formation and evolution with experimental precision and control. In this method, which we term "in vivo behavioral tracking," we track individuals' movements with a high definition video camera mounted atop a large field laboratory. We report results of an initial study that quantifies the composition, structure, and size of the incipient groups. We also apply in-vivo spatial tracking to study participants' tendency to cooperate as a function of their embeddedness in those crowds. We find that participants form groups of seven on average, are more likely to approach others of similar attractiveness and (to a lesser extent) gender, and that participants' gender and attractiveness are both associated with their proximity to the spatial center of groups (such that women and attractive individuals are more likely than men and unattractive individuals to end up in the center of their groups). Furthermore, participants' proximity to others early in the study predicted the effort they exerted in a subsequent cooperative task, suggesting that submergence in a crowd may predict social loafing. We conclude that in vivo behavioral tracking is a uniquely powerful new tool for answering longstanding, fundamental questions about group dynamics.

  7. Plucking in Mixed Alluvial-Bedrock Rivers: The Incipient Motion Problem

    Science.gov (United States)

    Hurst, A. A.; Furbish, D. J.

    2015-12-01

    Bedrock river channel erosion is an important factor in the evolution of landscapes, driving the relief of mountainous drainage basins and setting the lowest erosional positions of terrestrial landscapes. The mechanics behind erosional processes (predominantly plucking and abrasion) in these rivers are only recently being explored in depth. Plucking, the fracture and extraction of jointed blocks, is observationally an order of magnitude more efficient than abrasion, but if a river cannot provide the force necessary to move the plucked block, erosion by plucking cannot proceed. Therefore, incipient motion of blocks starting at rest on a solid surface is an important factor in erosion by plucking. Calculations of forces necessary for incipient motion require values of drag coefficients, which do not exist for bedrock contact geometry. We discovered from experiments on a flume that drag coefficients (CD) are inversely proportional to aspect ratios (RA), defined as the frontal block height to width. We used the relationship with field data from plucked blocks at a stream at Montgomery Bell State Park in Burns, TN, a mixed-alluvial bedrock channel with an actively incising knick zone, to support our theory and experimental data. Sizes of plucked blocks were compared to the velocities needed to move them, and then calculations done for bankfull velocities at the stream at Montgomery Bell to determine if it could attain these velocities. It was discovered that this stream has a bankfull depth-averaged velocity of 1.26 m s-1 and is capable of moving a large range of plucked block sizes. Therefore, erosion of this particular stream is plucking-limited, not transport-limited.

  8. In vivo assessment of antimicrobial efficacy of silver-impregnated contact lens storage cases.

    Science.gov (United States)

    Dantam, Jaya; Zhu, Hua; Willcox, Mark; Ozkan, Jerome; Naduvilath, Thomas; Thomas, Varghese; Stapleton, Fiona

    2012-03-26

    To evaluate microbial contamination in silver-impregnated contact lens (CL) storage cases while establishing the effect of "wet " and "dry " case maintenance and to determine its association with clinical signs, symptoms, and compliance. Two noncontemporaneous prospective studies were conducted. Regular storage cases in study 1 (n = 40) and silver-impregnated cases in study 2 (n = 41) were used in conjunction with CL solution and CLs (balafilcon A). Cases were replaced monthly and collected at 1, 3, and 4 (for silver-impregnated cases only) months. Regular cases and the fourth-month silver-impregnated cases were maintained dry, and the other cases were maintained wet between uses. At collection, storage cases were sampled and cultured for microbial identification and enumeration. Ocular clinical findings, subjective responses to CL wear, and compliance were recorded at each visit. The percentages of microbial contamination for silver-impregnated and regular cases were 71% and 82% respectively. There were significantly (P < 0.005) fewer organisms in silver-impregnated cases (1.7 log CFU per well) than in regular cases (4.1 log CFU per well). In particular, silver-impregnated cases showed lower levels of Gram-negative bacteria (P = 0.04), Gram-positive bacilli (P = 0.03), and fungi (P = 0.006). Maintaining the silver-impregnated cases wet resulted in a lower percentage of contamination (71%; P < 0.01) than maintaining them dry (94%). There was no association between any clinical signs, symptoms, or compliance and microbial contamination of storage cases. More than 70% of the storage cases used in daily wear CL care for a month was contaminated irrespective of the types of cases. However, silver-impregnated cases were colonized by reduced levels of Gram-negative bacteria.

  9. Improved detection of incipient anomalies via multivariate memory monitoring charts: Application to an air flow heating system

    KAUST Repository

    Harrou, Fouzi

    2016-08-11

    Detecting anomalies is important for reliable operation of several engineering systems. Multivariate statistical monitoring charts are an efficient tool for checking the quality of a process by identifying abnormalities. Principal component analysis (PCA) was shown effective in monitoring processes with highly correlated data. Traditional PCA-based methods, nevertheless, often are relatively inefficient at detecting incipient anomalies. Here, we propose a statistical approach that exploits the advantages of PCA and those of multivariate memory monitoring schemes, like the multivariate cumulative sum (MCUSUM) and multivariate exponentially weighted moving average (MEWMA) monitoring schemes to better detect incipient anomalies. Memory monitoring charts are sensitive to incipient anomalies in process mean, which significantly improve the performance of PCA method and enlarge its profitability, and to utilize these improvements in various applications. The performance of PCA-based MEWMA and MCUSUM control techniques are demonstrated and compared with traditional PCA-based monitoring methods. Using practical data gathered from a heating air-flow system, we demonstrate the greater sensitivity and efficiency of the developed method over the traditional PCA-based methods. Results indicate that the proposed techniques have potential for detecting incipient anomalies in multivariate data. © 2016 Elsevier Ltd

  10. Incipient-signature identification of mechanical anomalies in a ship-borne satellite antenna system using an ensemble multiwavelet

    International Nuclear Information System (INIS)

    He, Shuilong; Zi, Yanyang; Chen, Jinglong; Chen, Binqiang; He, Zhengjia; Zhao, Chenlu; Yuan, Jing

    2014-01-01

    The instrumented tracking and telemetry ship with a ship-borne satellite antenna (SSA) is the critical device to ensure high quality of space exploration work. To effectively detect mechanical anomalies that can lead to unexpected downtime of the SSA, an ensemble multiwavelet (EM) is presented for identifying the anomaly related incipient-signatures within the measured dynamic signals. Rather than using a predetermined basis as in a conventional multiwavelet, an EM optimizes the matching basis which satisfactorily adapts to the anomaly related incipient-signatures. The construction technique of an EM is based on the conjunction of a two-scale similarity transform (TST) and lifting scheme (LS). For the technique above, the TST improves the regularity by increasing the approximation order of multiscaling functions, while subsequently the LS enhances the smoothness and localizability via utilizing the vanishing moment of multiwavelet functions. Moreover, combining the Hilbert transform with EM decomposition, we identify the incipient-signatures induced by the mechanical anomalies from the measured dynamic signals. A numerical simulation and two successful applications of diagnosis cases (a planetary gearbox and a roller bearing) demonstrate that the proposed technique is capable of dealing with the challenging incipient-signature identification task even though spectral complexity, as well as the strong amplitude/frequency modulation effect, is present in the dynamic signals. (paper)

  11. IMPREGNATED FIBROUS CHEMOSORBENTS OF ACID GASES FOR RESPIRATORY PURPOSE

    Directory of Open Access Journals (Sweden)

    A. A. Ennan

    2017-11-01

    Full Text Available The present review is dedicated to the analysis of scientific works carried out in Physico- Chemical Institute of Environment and Human Protection (Odessa, Ukrainie and directed to the development of import-substituting sorption-filtering materials for respiratory purposes – impregnated fibrous chemisorbents (IFCS of acid gases, which are manufactured using standard equipment, as well as affordable and inexpensive chemical reagents and carriers of domestic origin. The process of chemisorption of sulphur dioxide by hexamethylenetetramine (HMTA modified nonwoven fibrous material resulted acid-catalyzed hydrolysis of HMTA to form aminomethanesulfonic acid and toxic formaldehyde. The IFCS with HMTA carried was recommended to use for air purification only from SiF4, HF, HCl and Cl2. Chemisorption of sulphur dioxide by fibrous materials impregnated by ethanolamines (monoethanolamine, diethanomamine, triethanomamine and N-methylethanolamine and polyethylenepolyamine (PEPA occurs only in the presence of “free” water with formation of “onium” sulphites, hydrosulphites and pyrosulphites. IFCS-PEPA (dynamic activity is 1,38 mmol(SO2/g are not inferior to the protective characteristics of IFCS with Na2CO3, HMTA, ethanolamines and the best foreign ionexchange fibrous chemisorbents brand VION and FIBAN (dynamic activity is 0,263 ÷0,422 mmol(SO2/g under conditions of respirators actual use (jAGM = 60 ÷ 90 %, TAGM = 297 K, VAGM = 2,0 sm/s, СSO2 = 20 ÷ 1000 mg/g3, QPEPA = 3,45 mmol/g. It is recommended to use the condensation products of primary alkylamines with formaldehyde (with large molar masses than the bases, complex compounds of amines with 3d-metals (Ni(II and Cu(II, salts of amine with aminoacids (glycine and polybasic acids (orthophosphoric acid (pKa1 = 2,12 and citric acid (pKa1 = 3,13 for manufacturing of IFCS of acid gases The IFCS with indication of dynamic absorptive capacity “wearing” (IVKS-I was developed.

  12. A comparative study of alumina-supported Ni catalysts prepared by photodeposition and impregnation methods on the catalytic ozonation of 2,4-dichlorophenoxyacetic acid

    Energy Technology Data Exchange (ETDEWEB)

    Rodríguez, Julia L., E-mail: ozliliana@yahoo.com.mx [Lab. Ing. Química Ambiental. ESIQIE–Instituto Politécnico Nacional (Mexico); Valenzuela, Miguel A. [Lab.Catálisis y Materiales. ESIQIE–Instituto Politécnico Nacional. Zacatenco (Mexico); Tiznado, Hugo [Centro de Nanociencias y Nanotecnología. CNyN Universidad Nacional Autónoma de México (Mexico); Poznyak, Tatiana [Lab. Ing. Química Ambiental. ESIQIE–Instituto Politécnico Nacional (Mexico); Chairez, Isaac [Departamento de Bioprocesos, UPIBI- Instituto Politécnico Nacional (Mexico); Magallanes, Diana [Lab. Ing. Química Ambiental. ESIQIE–Instituto Politécnico Nacional (Mexico)

    2017-02-15

    The heterogeneous catalytic ozonation on unsupported and supported oxides has been successfully tested for the removal of several refractory compounds in aqueous solution. In this work, alumina-supported nickel catalysts prepared by photodeposition and impregnation methods were compared in the catalytic ozonation of 2,4-dichlorophenoxyacetic acid (2,4-D). The catalysts were characterized by high-resolution electron microscopy and X-ray photoelectron spectroscopy. The photochemical decomposition of Ni acetylacetonate to produce Ni(OH){sub 2}, NiO, and traces of Ni° deposited on alumina was achieved in the presence of benzophenone as a sensitizer. A similar surface composition was found with the impregnated catalyst after its reduction with hydrogen at 500 °C and exposed to ambient air. Results indicated a higher initial activity and maleic acid (byproduct) concentration with the photodeposited catalyst (1 wt% Ni) compared to the impregnated catalyst (3 wt% Ni). These findings suggest the use of the photodeposition method as a simple and reliable procedure for the preparation of supported metal oxide/metal catalysts under mild operating conditions.

  13. A comparative study of alumina-supported Ni catalysts prepared by photodeposition and impregnation methods on the catalytic ozonation of 2,4-dichlorophenoxyacetic acid

    International Nuclear Information System (INIS)

    Rodríguez, Julia L.; Valenzuela, Miguel A.; Tiznado, Hugo; Poznyak, Tatiana; Chairez, Isaac; Magallanes, Diana

    2017-01-01

    The heterogeneous catalytic ozonation on unsupported and supported oxides has been successfully tested for the removal of several refractory compounds in aqueous solution. In this work, alumina-supported nickel catalysts prepared by photodeposition and impregnation methods were compared in the catalytic ozonation of 2,4-dichlorophenoxyacetic acid (2,4-D). The catalysts were characterized by high-resolution electron microscopy and X-ray photoelectron spectroscopy. The photochemical decomposition of Ni acetylacetonate to produce Ni(OH) 2 , NiO, and traces of Ni° deposited on alumina was achieved in the presence of benzophenone as a sensitizer. A similar surface composition was found with the impregnated catalyst after its reduction with hydrogen at 500 °C and exposed to ambient air. Results indicated a higher initial activity and maleic acid (byproduct) concentration with the photodeposited catalyst (1 wt% Ni) compared to the impregnated catalyst (3 wt% Ni). These findings suggest the use of the photodeposition method as a simple and reliable procedure for the preparation of supported metal oxide/metal catalysts under mild operating conditions.

  14. Automation of static and dynamic non-dispersive liquid phase microextraction. Part 2: Approaches based on impregnated membranes and porous supports.

    Science.gov (United States)

    Alexovič, Michal; Horstkotte, Burkhard; Solich, Petr; Sabo, Ján

    2016-02-11

    A critical overview on automation of modern liquid phase microextraction (LPME) approaches based on the liquid impregnation of porous sorbents and membranes is presented. It is the continuation of part 1, in which non-dispersive LPME techniques based on the use of the extraction phase (EP) in the form of drop, plug, film, or microflow have been surveyed. Compared to the approaches described in part 1, porous materials provide an improved support for the EP. Simultaneously they allow to enlarge its contact surface and to reduce the risk of loss by incident flow or by components of surrounding matrix. Solvent-impregnated membranes or hollow fibres are further ideally suited for analyte extraction with simultaneous or subsequent back-extraction. Their use can therefore improve the procedure robustness and reproducibility as well as it "opens the door" to the new operation modes and fields of application. However, additional work and time are required for membrane replacement and renewed impregnation. Automation of porous support-based and membrane-based approaches plays an important role in the achievement of better reliability, rapidness, and reproducibility compared to manual assays. Automated renewal of the extraction solvent and coupling of sample pretreatment with the detection instrumentation can be named as examples. The different LPME methodologies using impregnated membranes and porous supports for the extraction phase and the different strategies of their automation, and their analytical applications are comprehensively described and discussed in this part. Finally, an outlook on future demands and perspectives of LPME techniques from both parts as a promising area in the field of sample pretreatment is given. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Chiral separation of amino-alcohols using extractant impregnated resins.

    Science.gov (United States)

    Babić, Katarina; Driessen, G H M; van der Ham, A G J; de Haan, A B

    2007-02-16

    The performance of extractant impregnated resin (EIR) technology for chiral separation of amino-alcohols has been investigated. Phenylglycinol was selected as an archetype model enantiomer and azophenolic crown ether was used as a versatile enantioselective extractant. 1-Phenyloctane was selected as a suitable solvent for this application because of its very low solubility in water. The extraction system was first evaluated by liquid-liquid equilibrium experiments. It was shown that crown ether dissolved in 1-phenyloctane has an intrinsic selectivity of 11.5. However, due to very low solubility of phenylglycinol in 1-phenyloctane, the overall capacity of the crown ether solution in 1-phenyloctane is limited. The extractant solution was immobilized in macroporous polypropylene particles. Competitive sorption isotherms were obtained from batch experiments and successfully described with a predictive model based on the complexation constants and partitioning ratios, either obtained from literature or from independent experiments. The equilibrium selectivity of these EIRs approaches the intrinsic selectivity for low phenylglycinol concentrations. The dynamic behaviour and stability of the system were examined in column experiments. Breakthrough profiles as well as the elution curves of the R enantiomer are less sharp than those of the S enantiomer proving that the R enantiomer is strongly retained on the column. Separation of phenylglycinol enantiomers is favoured by using lower feed flow rates. The column was regenerated by water with only atmospheric carbon dioxide dissolved which proved to be sufficient. After several cycles the breakthrough profiles remain unchanged suggesting that these EIRs will be sufficiently stable.

  16. Permethrin-impregnated bednets reduce nuisance arthropods in Gambian houses.

    Science.gov (United States)

    Lindsay, S W; Snow, R W; Armstrong, J R; Greenwood, B M

    1989-10-01

    The prevalence of bedbugs (Cimex hemipterus L.), chicken ticks (Argas persicus Oken) and headlice (Pediculus capitis De Geer) was surveyed in a rural area of The Gambia. At the beginning of the study 37.5% of children's beds were infested with bedbugs and 3.9% with chicken ticks, whilst the prevalence rate of pediculosis in children under 10 years old was 28.8%. Both bedbugs and headlice were clustered within compounds. Headlice prevalence increased with hair length and they were more common on girls than boys. Following this cross-sectional survey all bednets in the sixteen hamlets were either dipped in permethrin or a placebo. About 4 months later it was found that bedbugs and chicken ticks had disappeared from homes in which the bednets had been impregnated with permethrin. There was no reduction in hamlets with placebo-treated bednets. The rate of acquiring headlice between the two surveys was reduced by 91.1% in children who slept under insecticide-treated bednets compared with children with placebo-treated bednets. There were also significantly fewer day-flying and crawling insects, except earwigs, in homes of children who slept under insecticide-treated bednets compared with those with placebo-treated nets. These additional benefits of permethrin-treated bednets should contribute to their widespread acceptance and utilization by the community for personal protection.

  17. A Mathematical Model of Repeated Impregnation of Porous Bodies with Solutions of Polymers

    Directory of Open Access Journals (Sweden)

    I. V. Glebov

    2015-01-01

    Full Text Available The paper describes basic methods of impregnating porous bodies with solutions of polymers and their use to manufacture prepregs. It also describes the existing methods of manufacturing multilayer prepregs to produce aerospace coating of the spacecraft "Soyuz". It is shown that these prepregs have to meet high requirements for the content of the polymer, as compared with other composite materials, about 35 - 40% of the mass. Methods used for their manufacturing are long-term and non-controllable. The assumption is made that using the vacuum impregnation technology of a woven material will allow to accelerate the manufacturing process of these prepregs and improve their quality.In reviewing the technical literature have been found works on modeling the processes of impregnation, but they are aimed only at studying the speed of the woven material impregnation by various fluids and determining the time of impregnation. There were no models found to define prepreg parameters during the process of multiple impregnations. The aim of this work is to develop the simple mathematical model, which enables us to predict the polymer content of volatile products in the prepreg after each cycle of multiple impregnation of woven material with a solution of the polymer.To consider the vacuum impregnation method are used the prepregs based on silica and silica-nylon stitch-bonding fabric and bakelite varnish LBS-4 containing 50 - 60% of phenol resin and the solvent with minor impurities of pure phenol and water, as an example. To describe the process of vacuum impregnation of the porous work-piece is developed a mathematical description of the process of filling the porous space of the material with a varnish. It is assumed that the varnish components fill the porous space of the material in the same proportion as they are contained in the varnish.It is shown that a single impregnation cannot ensure the content of phenol resin in the prepreg over 32%, which does

  18. Strength and durability of concrete modified by sulfur-based impregnating compounds

    Directory of Open Access Journals (Sweden)

    MASSALIMOV Ismail Alexandrovich

    2015-06-01

    Full Text Available The aim of the research was to determine how sulfur-containing compound impregnation influences on concrete compressive strength and the impact resistance of concrete tiles. The results of these studies indicate that impregnation of vibropressed concrete paving tiles and concrete samples of dif-ferent strength classes with aqueous solutions based on calcium polysulfide leads to a significant increase of compressive strength and impact resistance. These data show that the strength of the products can be controlled by varying duration and frequency of the impregnation and by using pre-vacuum method. Impregnation with a solution of calcium polysulfide density of 1,23 g/cm³ can be recommended to increase strength of concrete products that are exposed to intense hydration and mechanical stress.

  19. MOISTURE ISOTHERMS OF CASSAVA BAGASSE COMPOSITES IMPREGNATED WITH CASSAVA STARCH ACETATE SOLUTIONS

    Directory of Open Access Journals (Sweden)

    Kátia N. MATSUI

    2009-07-01

    Full Text Available

    The industrial processing of cassava to obtain starch generates a great variety of residues, with bagasse being the main solid residue produced. The improper disposal of this material represents an environmental problem and could be avoided by using this residue as a raw material to obtain biodegradable products. The bagasse produced during the process to obtain starch from cassava was used to prepare composites for disposable trays. Samples of the composites were impregnated with cassava starch acetate at atmospheric pressure and under vacuum condition. Moisture isotherms were determined and adjusted by GAB model. It was observed that the impregnation promoted an important decrease in sample higroscopicity, mainly at high relative humidities. These results suggest that starch acetate impregnation can be an alternative to water proofing biological materials like the composites obtained in this work. KEYWORDS: Cassava; bagasse; starch acetate; impregnation; isotherms.

  20. Oxidative dehydration of glycerol to acrylic acid over vanadium-impregnated zeolite beta

    Energy Technology Data Exchange (ETDEWEB)

    Pestana, Carolina F.M.; Guerra, Antonio C.O.; Turci, Cassia C. [Universidade Federal do Rio de Janeiro, RJ (Brazil). Inst. de Quimica; Ferreira, Glaucio B. [Universidade Federal Fluminense, Niteroi, RJ (Brazil). Inst. de Quimica; Mota, Claudio J.A., E-mail: cmota@iq.ufrj.br [INCT Energia e Ambiente, Universidade Federal do Rio de Janeiro, RJ (Brazil)

    2013-01-15

    The oxidative dehydration of glycerol to acrylic acid was studied over vanadium-impregnated zeolite Beta. Catalysts were prepared by wet impregnation of ammonium metavanadate over ammonium-exchanged zeolite Beta, followed by air calcination at 823 K. Impregnation reduced the specific surface area, but did not significantly affected the acidity (Bronsted and Lewis) of the zeolites. The catalytic evaluation was carried out in a fixed bed flow reactor using air as the carrier and injecting glycerol by means of a syringe pump. Acrolein was the main product, with acetaldehyde and hydroxy-acetone (acetol) being also formed. Acrylic acid was formed with approximately 25% selectivity at 548 K over the impregnated zeolites. The result can be explained by XPS (X-ray photoelectron spectroscopy) measurements, which indicated a good dispersion of the vanadium inside the pores. (author)

  1. Radiation-curable impregnants for the consolidation of wooden finds and art objects

    International Nuclear Information System (INIS)

    Schaudy, R.

    1990-01-01

    A large number of radiation-curable monomers and oligomers have been investigated in order to determine whether they are suitable for the impregnation and consolidation of porous materials, especially of old wooden objects like archaeological finds, farmer's tools, furniture or art objects. Criteria for suitability are mainly the viscosity of the impregnant, curing behaviour, shrinkage upon curing, hardness and elasticity of the cured product, compatibility with the wood matrix and ageing properties. Selected impregnants have been applied to standardized sound and artificially decayed wood, and the interaction has been studied. Apparently the properties of the consolidated wood can only to a limited extent be derived from the behaviour of the pure polymeric material. Predictions are therefore difficult. Some selected impregnants have been applied to archaeological and ethnological objects with good success. (author)

  2. Oxidative dehydration of glycerol to acrylic acid over vanadium-impregnated zeolite beta

    International Nuclear Information System (INIS)

    Pestana, Carolina F.M.; Guerra, Antonio C.O.; Turci, Cassia C.

    2013-01-01

    The oxidative dehydration of glycerol to acrylic acid was studied over vanadium-impregnated zeolite Beta. Catalysts were prepared by wet impregnation of ammonium metavanadate over ammonium-exchanged zeolite Beta, followed by air calcination at 823 K. Impregnation reduced the specific surface area, but did not significantly affected the acidity (Bronsted and Lewis) of the zeolites. The catalytic evaluation was carried out in a fixed bed flow reactor using air as the carrier and injecting glycerol by means of a syringe pump. Acrolein was the main product, with acetaldehyde and hydroxy-acetone (acetol) being also formed. Acrylic acid was formed with approximately 25% selectivity at 548 K over the impregnated zeolites. The result can be explained by XPS (X-ray photoelectron spectroscopy) measurements, which indicated a good dispersion of the vanadium inside the pores. (author)

  3. Advanced Examination Techniques Applied to the Assessment of Vacuum Pressure Impregnation (VPI) of ITER Correction Coils

    CERN Document Server

    Sgobba, Stefano; Samain, Valerie; Libeyre, Paul; Cecillon, Alexandre; Dawid, J

    2014-01-01

    The ITER Magnet System includes a set of 18 superconducting correction coils (CC) which are used to compensate the error field modes arising from geometrical deviations caused by manufacturing and assembly tolerances. The turn and ground insulation are electrically insulated with a multi-layer fiberglass polyimide interleaved composite, impregnated with epoxy resin using vacuum pressure impregnation (VPI). Adequate high voltage insulation (5 kV), mechanical strength and rigidity of the winding pack should be achieved after impregnation and curing of the insulation system. VPI is an effective process to avoid defects such dry spots and incomplete wet out. This insulation technology has also been developed since several years for application to large superconducting coils and more recently to ITER CC. It allows the coils to be impregnated without impacting on their functional characteristics. One of the critical challenges associated with the construction of the CC is the qualification of the VPI insulation. Se...

  4. Preliminary applicability of dye impregnated paper strips in gamma dose measurement

    International Nuclear Information System (INIS)

    Gamma radiations are known to bring about radiolysis of the compounds/dyes which is used as a measure of the energy of the radiation incident on the system. The use of various dye solutions for chemical dosimetry is reported. Similarly γ-dose quantification using paper/polymer impregnated with dyes has also been reported. In the present study, decolouration due to gamma radiation of Congo Red (CR) and Brilliant Yellow (BY) dye impregnated paper has been investigated

  5. Carbonization of heavy metal impregnated sewage sludge oriented towards potential co-disposal

    International Nuclear Information System (INIS)

    Dou, Xiaomin; Chen, Dezhen; Hu, Yuyan; Feng, Yuheng; Dai, Xiaohu

    2017-01-01

    Highlights: • The carbonization of SS with externally impregnated heavy metals was investigated. • Externally impregnated heavy metals can be immobilized in the SSC. • Higher carbonization temperature help produce non-hazardous SSC. • Incineration FA can be kneaded into SS for co-disposal through co-carbonization. - Abstract: Sewage sludge (SS) is adopted as a stabilizer to immobilize externally impregnated heavy metals through carbonization oriented towards the co-disposal of SS and some hazardous wastes. Firstly Cu and Pb were impregnated into SS to ascertain the impregnating capacity and leaching behaviours of heavy metals in the resulting sewage sludge char (SSC). Meanwhile, scanning electron microscopy (SEM) and X-ray diffraction (XRD) were employed to detect the heavy metal phase in the SSC. The results showed that within 400–800 °C and an impregnating concentration ≨0.5 wt%, more than 90% of the externally impregnated Cu and Pb were remained in the SSC and immobilized. And higher temperatures helped produce non-hazardous SSC. In addition, SEM and XRD analyses revealed that externally impregnated heavy metals could be converted into stable forms and evenly distributed throughout the SSC. In the second step municipal solid waste incineration fly ash (FA) was kneaded into SS and subjected to carbonization; it has been proved that the heavy metals in FA can be well immobilized in the resulting char when FA: SS mass ratio is 1:5. Those results show that sewage sludge can be co-carbonized with wastes contaminated with heavy metals to achieve co-disposal.

  6. Carbonization of heavy metal impregnated sewage sludge oriented towards potential co-disposal

    Energy Technology Data Exchange (ETDEWEB)

    Dou, Xiaomin [Thermal & Environmental Engineering Institute, Tongji University, Shanghai 201804 (China); Chen, Dezhen, E-mail: chendezhen@tongji.edu.cn [Thermal & Environmental Engineering Institute, Tongji University, Shanghai 201804 (China); Hu, Yuyan; Feng, Yuheng [Thermal & Environmental Engineering Institute, Tongji University, Shanghai 201804 (China); Dai, Xiaohu [National Engineering Research Centre for Urban Pollution Control, Tongji University, Shanghai 200092 (China); College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China)

    2017-01-05

    Highlights: • The carbonization of SS with externally impregnated heavy metals was investigated. • Externally impregnated heavy metals can be immobilized in the SSC. • Higher carbonization temperature help produce non-hazardous SSC. • Incineration FA can be kneaded into SS for co-disposal through co-carbonization. - Abstract: Sewage sludge (SS) is adopted as a stabilizer to immobilize externally impregnated heavy metals through carbonization oriented towards the co-disposal of SS and some hazardous wastes. Firstly Cu and Pb were impregnated into SS to ascertain the impregnating capacity and leaching behaviours of heavy metals in the resulting sewage sludge char (SSC). Meanwhile, scanning electron microscopy (SEM) and X-ray diffraction (XRD) were employed to detect the heavy metal phase in the SSC. The results showed that within 400–800 °C and an impregnating concentration ≨0.5 wt%, more than 90% of the externally impregnated Cu and Pb were remained in the SSC and immobilized. And higher temperatures helped produce non-hazardous SSC. In addition, SEM and XRD analyses revealed that externally impregnated heavy metals could be converted into stable forms and evenly distributed throughout the SSC. In the second step municipal solid waste incineration fly ash (FA) was kneaded into SS and subjected to carbonization; it has been proved that the heavy metals in FA can be well immobilized in the resulting char when FA: SS mass ratio is 1:5. Those results show that sewage sludge can be co-carbonized with wastes contaminated with heavy metals to achieve co-disposal.

  7. Study of Thermomechanical Properties of The Epoxy-Impregnated Cable Composite for a 15 T Nb3Sn Dipole Demonstrator

    Science.gov (United States)

    Li, Pei; Krave, Steve; Zlobin, Alexander

    2017-12-01

    The knowledge of the thermomechanical properties of the composite of cable/insulation/epoxy impregnation are important for the design, fabrication and operation of superconducting accelerator magnets. As a part of the 15 T dipole magnet development at Fermi National Accelerator Laboratory (FNAL), we studied the thermomechanical properties of cable stack that represents the cable composites in the 15 T dipole. The measurements include thermal contraction and strain-stress characterization under compressive load along the principal directions. The cable stack samples show hysteresis behaviour in loading-unloading cycles, which is found to be most dramatic along the azimuthal direction. Also, the choice of insulation material/procedure is found to strongly impact the bonding between cables and epoxy/cable layers. The cable stacks measured in this study use E-glass tape wrapping insulation and show weaker bonding to cables than similar cable stacks using S-2 glass sleeves insulation previously studied.

  8. Geochemical Consequence of Extraction of Incipient CO2-rich melts from Earth's Deep Upper Mantle

    Science.gov (United States)

    Dasgupta, R.; Withers, A. C.; McDonough, W. F.; Hirschmann, M. M.

    2007-12-01

    The initiation of partial melting beneath mid-oceanic ridges and ocean islands likely produces incipient carbonatitic melts. These highly mobile melts generated at great depth may not only affect geophysical properties of deep upper mantle but can also influence Earth's geochemical evolution by releasing incompatible parent and/or daughter elements, heat producing elements, and volatiles. But constraints on the fractionation of the key trace elements between the peridotitic residue and carbonatitic melts are lacking at conditions of initiation of partial melting beneath ridges.Experiments at 6.6-8.6 GPa and 1265-1470 °C on carbonated peridotite doped with a blend of trace elements produced cpx + garnet + magnesite ± opx ± olivine + carbonatitic melt (cbL) similar in composition to that expected at the solidus of carbonated peridotite (Ca# = 0.52 at 6.6 GPa and 0.45 at 8.6 GPa; Na2O = ~4 wt.% at 6.6 GPa and ~2.5 wt.% at 8.6 GPa). Compared to previous studies at lower pressures (2.0-4.6 GPa), Dcpx/cbL from the present study are smaller for elements substituting into the cpx M2 site, especially trivalent cations ( DLu = 0.17, DLa = 0.006). Dcpx/cbL for U (0.001) and Th (0.002) are also noticeably lower than the previous estimates. In contrast, Dgarnet/cbL values are higher for REEs ( DLu = 4.6, DLa = 0.039) and HFSEs, U (0.023) and Th (0.017).Our estimate of Dperidotite/cbL indicates that incipient carbonatite extraction from the deep upper mantle will produce a residue with a more depleted Rb/Sr, U/Pb, Th/U, and enriched Sm/Nd, which may evolve to produce the most common of the mantle end member components, PREMA. Metasomatic implantation of deep carbonatitic melt into the lithosphere can generate a high-μ (238U/204Pb) signature, whereas mixing of carbonatite with elevated Th/U can contribute to the observed 230Th-excesses in MORBs. However, carbonatites derived by incipient melting of depleted (DMM) mantle have limited trace element enrichments, ~10-100

  9. The Effect of Water Repellent Surface Impregnation on Durability of Cement-Based Materials

    Directory of Open Access Journals (Sweden)

    Peng Zhang

    2017-01-01

    Full Text Available In many cases, service life of reinforced concrete structures is severely limited by chloride penetration until the steel reinforcement or by carbonation of the covercrete. Water repellent treatment on the surfaces of cement-based materials has often been considered to protect concrete from these deteriorations. In this paper, three types of water repellent agents have been applied on the surface of concrete specimens. Penetration profiles of silicon resin in treated concrete have been determined by FT-IR spectroscopy. Water capillary suction, chloride penetration, carbonation, and reinforcement corrosion in both surface impregnated and untreated specimens have been measured. Results indicate that surface impregnation reduced the coefficient of capillary suction of concrete substantially. An efficient chloride barrier can be established by deep impregnation. Water repellent surface impregnation by silanes also can make the process of carbonation action slow. In addition, it also has been concluded that surface impregnation can provide effective corrosion protection to reinforcing steel in concrete with migrating chloride. The improvement of durability and extension of service life for reinforced concrete structures, therefore, can be expected through the applications of appropriate water repellent surface impregnation.

  10. Thermal and mechanical properties of advanced impregnation materials for HTS cables and coils

    International Nuclear Information System (INIS)

    Bagrets, N; Otten, S; Weiss, K-P; Kario, A; Goldacker, W

    2015-01-01

    In the growing field of high-temperature superconducting (HTS) applications, finding an appropriate impregnation material for cables and coils remains a challenging task. In HTS cables and coils, tapes have to be able to withstand mechanical loads during operation. Impregnation is playing a role as mechanical stabilization. However, material properties usually change significantly when going to low temperatures which can decrease performance of superconducting devices. For example, a large mismatch in thermal expansion between a conductor and impregnation material at low temperatures can lead to delamination and to degradation of the critical current. Impregnation materials can insulate tapes thermally which can lead to damage of the superconducting device in case of quench. Thus, thermal conductivity is an important property which is responsible for the temperature distribution in a superconducting cable or in a coil. Due to Lorentz forces acting on structural materials in a superconducting device, the mechanical properties of these materials should be investigated at operating temperatures of this device. Therefore, it is important to identify an advanced impregnation material meeting all specific requirements. In this paper, thermal and mechanical properties of impregnation material candidates with added fillers are presented in a temperature range from 300 K to 4 K. (paper)

  11. Effects of impregnation methods and drying conditions on quinoline hydrodenitrogenation over Ni-W based catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Fang; Qiu, Zegang; Zhao, Liangfu; Xiang, Hongwei [Institute of Coal Chemistry, Chinese Academy of Sciences (China); Guo, Shaoqing [Taiyuan University of Science and Technology (China)

    2014-04-15

    The effects of impregnation methods (co-impregnation and sequential impregnation) and drying conditions (air and vacuum) on the structure and catalytic behavior of MCM-41 supported Ni-W catalysts were investigated. The catalysts were characterized by powder X-ray diffraction (XRD) analysis, Fourier-transform infrared spectroscopy (FT-IR), diffuse reflectance UV-Vis absorbance spectroscopy (DRS), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and pyridine adsorbed infrared spectroscopy (Py-IR) techniques. They were tested for hydrodenitrogenation (HDN) of quinoline at temperatures of 300-400 deg C. The HDN results showed that the catalysts prepared by co-impregnation were more active than the catalysts prepared by sequential impregnation and the catalysts prepared by drying under vacuum were more active than the catalysts dried in air. Characterization revealed that the co-impregnation method and drying under vacuum promoted the dispersion of W, the formation of the active phases, and the formation of acidic sites on the catalysts. (author)

  12. Incipient mantle plume evolution: Constraints from ancient landscapes buried beneath the North Sea

    Science.gov (United States)

    Stucky de Quay, G.; Roberts, G. G.; Watson, J. S.; Jackson, C. A.-L.

    2017-03-01

    Geological observations that constrain the history of mantle convection are sparse despite its importance in determining vertical and horizontal plate motions, plate rheology, and magmatism. We use a suite of geological and geophysical observations from the northern North Sea to constrain evolution of the incipient Paleocene-Eocene Icelandic plume. Well data and a three-dimensional seismic survey are used to reconstruct a 58-55 Ma landscape now buried ˜1.5 km beneath the seabed in the Bressay region. Geochemical analyses of cuttings from wells that intersect the landscape indicate the presence of angiosperm debris. These observations, combined with presence of coarse clastic material, interpreted beach ridges, and a large dendritic drainage network, indicate that this landscape formed subaerially. Longitudinal profiles of paleo-rivers were extracted and inverted for an uplift rate history, indicating three distinct phases of uplift and total cumulative uplift of ˜350 m. Dinoflagellate cysts in the surrounding marine stratigraphy indicate that this terrestrial landscape formed in ˜150 km/Ma.

  13. Incipient microphase separation in short chain perfluoropolyether-block-poly(ethylene oxide) copolymers.

    Science.gov (United States)

    Chintapalli, Mahati; Timachova, Ksenia; Olson, Kevin R; Banaszak, Michał; Thelen, Jacob L; Mecham, Sue J; DeSimone, Joseph M; Balsara, Nitash P

    2017-06-07

    Incipient microphase separation is observed by wide angle X-ray scattering (WAXS) in short chain multiblock copolymers consisting of perfluoropolyether (PFPE) and poly(ethylene oxide) (PEO) segments. Two PFPE-PEO block copolymers were studied; one with dihydroxyl end groups and one with dimethyl carbonate end groups. Despite having a low degree of polymerization (N ∼ 10), these materials exhibited significant scattering intensity, due to disordered concentration fluctuations between their PFPE-rich and PEO-rich domains. The disordered scattering intensity was fit to a model based on a multicomponent random phase approximation to determine the value of the interaction parameter, χ, and the radius of gyration, R g . Over the temperature range 30-90 °C, the values of χ were determined to be very large (∼2-2.5), indicating a high degree of immiscibility between the PFPE and PEO blocks. In PFPE-PEO, due to the large electron density contrast between the fluorinated and non-fluorinated block and the high value of χ, disordered scattering was detected at intermediate scattering angles, (q ∼ 2 nm -1 ) for relatively small polymer chains. Our ability to detect concentration fluctuations was enabled by both a relatively large value of χ and significant scattering contrast.

  14. Transcriptome analysis of synaptoneurosomes identifies neuroplasticity genes overexpressed in incipient Alzheimer's disease.

    Directory of Open Access Journals (Sweden)

    Celia Williams

    Full Text Available In Alzheimer's disease (AD, early deficits in learning and memory are a consequence of synaptic modification induced by toxic beta-amyloid oligomers (oAbeta. To identify immediate molecular targets downstream of oAbeta binding, we prepared synaptoneurosomes from prefrontal cortex of control and incipient AD (IAD patients, and isolated mRNAs for comparison of gene expression. This novel approach concentrates synaptic mRNA, thereby increasing the ratio of synaptic to somal mRNA and allowing discrimination of expression changes in synaptically localized genes. In IAD patients, global measures of cognition declined with increasing levels of dimeric Abeta (dAbeta. These patients also showed increased expression of neuroplasticity related genes, many encoding 3'UTR consensus sequences that regulate translation in the synapse. An increase in mRNA encoding the GluR2 subunit of the alpha-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid receptor (AMPAR was paralleled by elevated expression of the corresponding protein in IAD. These results imply a functional impact on synaptic transmission as GluR2, if inserted, maintains the receptors in a low conductance state. Some overexpressed genes may induce early deficits in cognition and others compensatory mechanisms, providing targets for intervention to moderate the response to dAbeta.

  15. Evidence of incipient speciation in Astyanax scabripinnis species complex (Teleostei: Characidae

    Directory of Open Access Journals (Sweden)

    Jonathan P. Castro

    Full Text Available Two populations of the Astyanax scabripinniscomplex, isolated by a waterfall with over 100 meters depth and inhabiting different altitudes of the same river (1850 m a.s.l. and 662 m a.s.l. were compared in reproductive data, geometric morphometry, tooth morphology, anal-fin rays counts, and karyotype, in order to test the hypothesis of speciation between the two populations. The results in the geometric morphometry analysis showed differences between the populations. Discriminant function analysis (DFA and canonical variance analysis revealed sexual dimorphism. Secondary sexual characters, such as hooks in the anal fin rays of the males are absent in the lower altitude population. Both populations had the same macro karyotype structure, except for the absence of B chromosomes in the lower altitude population. The fluorescence in situ hybridization showed differences for both markers (18S rDNA and 5S rDNA, and reproductive data suggests pre-zygotic reproductive isolation among the two populations. The data showed the absence of gene flow, indicating that an incipient speciation process has occurred, which leads the two populations to follow independent evolutionary pathways.

  16. Threshold Criteria for Incipient Grain Motion with Turbulent Fluctuations on a Horizontal Bed

    International Nuclear Information System (INIS)

    Wan, M.W.H.M.

    2015-01-01

    The effect of turbulent fluctuations on the threshold criteria for incipient grain motion over a wide range of sediment size is investigated. In this work, attention is paid to the comparison of the critical Shields parameter θ c profile obtained when the near-bed fluid forces induced sediment motion are oscillating-grid turbulence and a single idealised eddy of vortex ring. For experimental work, near-spherical monodisperse sediments were used throughout with relative densities of 1.2 and 2.5 and mean diameters d ranging between 80 and 1087 μm. The measured values of θ c on a horizontal bed α = 0 (hence denoted as θ c0 ), were compared to the θ c0 profiles obtained by grid turbulence and vortex ring experiments. Although different in magnitude, the θ c0 profiles were comparable, that is the θ c0 were seen to increase monotonically for hydraulically smooth bed forms and to be approximately constant for hydraulically rough bed forms. However the limit of hydraulically smooth region was found to vary between the oscillating-grid turbulence experiments, where wider smooth region was found when the turbulent fluctuations used to calculate θ c0 is not the near-bed velocity. (author)

  17. Advanced power system protection and incipient fault detection and protection of spaceborne power systems

    Science.gov (United States)

    Russell, B. Don

    1989-01-01

    This research concentrated on the application of advanced signal processing, expert system, and digital technologies for the detection and control of low grade, incipient faults on spaceborne power systems. The researchers have considerable experience in the application of advanced digital technologies and the protection of terrestrial power systems. This experience was used in the current contracts to develop new approaches for protecting the electrical distribution system in spaceborne applications. The project was divided into three distinct areas: (1) investigate the applicability of fault detection algorithms developed for terrestrial power systems to the detection of faults in spaceborne systems; (2) investigate the digital hardware and architectures required to monitor and control spaceborne power systems with full capability to implement new detection and diagnostic algorithms; and (3) develop a real-time expert operating system for implementing diagnostic and protection algorithms. Significant progress has been made in each of the above areas. Several terrestrial fault detection algorithms were modified to better adapt to spaceborne power system environments. Several digital architectures were developed and evaluated in light of the fault detection algorithms.

  18. On the Shape of the Crest of Short Wavelength Water Waves at Incipient Breaking

    Science.gov (United States)

    Diorio, J. D.; Liu, X.; Duncan, J. H.

    2007-11-01

    Breaking waves with wavelengths ranging from about 0.1 to 1.2 m are studied experimentally in a wind wave tank that is 11.8 m long, 1.15 m wide and 1.8 m high (1.0 m of water). The tank includes a wind tunnel with speeds up to 10 m/s and a programmable wave maker that resides at the upwind end of the tank. The shortest waves are generated by wind with speeds ranging from about 4 to 7 m/s. The longest waves are generated mechanically from focused wave packets with average frequencies ranging from 1.15 to 1.42 Hz. Waves with intermediate lengths are formed either by wind or by a nonlinear wave train with unstable sidebands generated by the wave maker. At incipient breaking, all the waves have a capillary-ripple pattern at the crest rather than a plunging jet. It is found that in spite of the wide range of wavelengths and major differences in the generation methods, the shapes of the capillary-ripple pattern are remarkably similar. Various geometrical parameters including the length of the first capillary wave and the length and thickness of the bulge that forms at the crest are extracted from the data. The variation of these parameters with gravity wavelength and slope of the front face of the wave is examined.

  19. Abnormal albuminuria and blood pressure rise in incipient diabetic nephropathy induced by exercise

    DEFF Research Database (Denmark)

    Christensen, Cramer

    1984-01-01

    The aim of the study was to evaluate the influence of light to moderate dynamic work (450 kpm/min followed by 600 kpm/min during 20 min each) on the blood pressure and renal protein handling in insulin-dependent diabetic patients with incipient nephropathy (D3) (elevated baseline albumin excretion...... but without clinical proteinuria). Fifteen male diabetic patients (D3) with a mean age of 26.5 +/- 4.8 years (SD) and a diabetes duration of 15.6 +/- 3.4 years (SD), 11 comparable diabetic patients with normal urinary albumin excretion (D2), and ten non-diabetic subjects (C) were studied. In D3 baseline....../min in D3 (193.0 mm Hg +/- 23.0) compared to D2 (170.5 +/- 17.3, 2P = 1.2%) and C (157.5 mm Hg +/- 20.9, 2P = 0.07%). Baseline albumin excretion in D3 was 82.6 micrograms/min X/ divided by 2.5 (geometric mean X/ divided by tolerance factor) and during exercise the maximal albumin excretion rose to 195...

  20. Comparison of nano-hydroxyapatite and sodium fluoride mouthrinse for remineralization of incipient carious lesions.

    Directory of Open Access Journals (Sweden)

    Roza Haghgoo

    2014-08-01

    Full Text Available Dental caries is an infectious disease that can be prevented in several ways. The aim of this study was to compare the efficacy of sodium fluoride mouthrinse and nano- hydroxyapatite (nano-HA for the remineralization of incipient caries.After obtaining different concentrations of nano-HA (0-2-5-10%, 60 sound premolars fixed in acrylic blocks were coated with nail polish except for one surface. Ten teeth (control group were stored in distilled water and the remaining 50 samples were demineralized by immersion in 13 ml of 0.1 M lactic acid and 0.2% poly acrylic acid for 48 hours. Their microhardness was then measured and compared to that of the control group. Next, the 50 test teeth were randomly divided into 5 groups of group1 (negative, group 2 (2% nano-HA, group 3 (5% nano-HA, group 4(10% nano-HA and group 5 (0.2 NAF mouthrinse. The microhardness of the teeth was measured after 12 hours of immersion in the above-mentioned solutions. Data were analyzed using repeated measures analysis of variance (ANOVA.Microhardness of all samples decreased significantly after immersion in the demineralization solution and increased following immersion in nano-HA and NAF mouthrinses; however, this increase was not statistically significant (P=0.711.Nano-HA and NAF mouthrinses can greatly enhance remineralization and increase tooth microhardness.

  1. Incipient Fault Detection and Isolation of Field Devices in Nuclear Power Systems Using Principal Component Analysis

    International Nuclear Information System (INIS)

    Kaistha, Nitin; Upadhyaya, Belle R.

    2001-01-01

    An integrated method for the detection and isolation of incipient faults in common field devices, such as sensors and actuators, using plant operational data is presented. The approach is based on the premise that data for normal operation lie on a surface and abnormal situations lead to deviations from the surface in a particular way. Statistically significant deviations from the surface result in the detection of faults, and the characteristic directions of deviations are used for isolation of one or more faults from the set of typical faults. Principal component analysis (PCA), a multivariate data-driven technique, is used to capture the relationships in the data and fit a hyperplane to the data. The fault direction for each of the scenarios is obtained using the singular value decomposition on the state and control function prediction errors, and fault isolation is then accomplished from projections on the fault directions. This approach is demonstrated for a simulated pressurized water reactor steam generator system and for a laboratory process control system under single device fault conditions. Enhanced fault isolation capability is also illustrated by incorporating realistic nonlinear terms in the PCA data matrix

  2. Numerical analysis of the influence of the impregnation ratio on the microporous structure formation of activated carbons, prepared by chemical activation of waste biomass with phosphoric(V) acid

    Science.gov (United States)

    Kwiatkowski, Mirosław; Kalderis, Dimitrios; Diamadopoulos, Evan

    2017-06-01

    This paper presents the results of the application of new mathematical adsorption models with the unique numerical fast multivariate identification procedure as the tool for analysing the influence of the impregnation ratio i.e. activator to the raw material mass ratio on the microporous structure development of the activated carbons, obtained from sugarcane bagasse and rice husk by chemical activation with phosphoric(V) acid.

  3. Potassium Hydroxide Impregnated Alumina (KOH-Alumina) as a Recyclable Catalyst for the Solvent-Free Multicomponent Synthesis of Highly Functionalized Substituted Pyridazines and/or Substituted Pyridazin-3(2H)-ones under Microwave Irradiation.

    Science.gov (United States)

    Mecadon, Hormi; Myrboh, Bekington

    2011-01-01

    The work described herein employs potassium hydroxide impregnated alumina (KOH-alumina) as a mild, efficient, and recyclable catalyst for a one-pot solvent-free and environmentally safer synthesis of 3,4,6-triarylpyridazines and some substituted pyridazines from active methylene carbonyl species, 1,2-dicarbonyls, and hydrazine hydrate by microwave (MW) irradiation. The method offers highly convergent, inexpensive, and functionality-tolerable procedure for rapid access to important pyridazine compounds in good yields.

  4. Extractability of metals and ecotoxicity of soils from two old wood impregnation sites in Finland.

    Science.gov (United States)

    Schultz, Eija; Joutti, Anneli; Räisänen, Marja-Liisa; Lintinen, Petri; Martikainen, Esko; Lehto, Olli

    2004-06-29

    Four metal-contaminated soil samples were classified using physical methods, extracted by selective extraction procedures and analyzed for chemical concentrations. De-ionized water, 0.01 mol/l barium chloride, 1 mol/l ammonium acetate and concentrated nitric acid were used as extraction solutions. Ecotoxicity of water extracts and soil samples was analyzed in order to describe the bioavailability of the contaminants. Samples from old wood impregnation plants contained high amounts of As, Cu, Cr and Zn, which originated from chromated copper arsenate, ammoniacal copper-zinc arsenate, and ammoniacal copper quaternary compound. Total As concentrations of the heavily contaminated samples varied from 752 to 4340 mg/kg, Cu concentrations from 339 to 2330 mg/kg, Cr concentrations from 367 to 2,140 mg/kg and Zn concentrations from 79 to 966 mg/kg. The extractabilities of metals differed according to soil type, extractant and element. Cu and Zn were proposed to cause the highest toxicity in the water extracts of the soils. Ecotoxicity tests displayed rather high differences in sensitivity both for water extracts and for solid soil samples. Reproduction of Enchytraeus sp. was the most sensitive and seed germination of Lactuca sativa the least sensitive and the other tests were in decreasing order of sensitivity: Folsomia candida>reverse electron transport>MetPLATE>Toxichromotest>Allium cepa root growth>Lemna sp. growth. As a conclusion, polluted soils rich in sand retain heavy metals with less firm bindings, particularly in the case of Cu and Zn, than soils rich in clay, indicating that chemical methods for measuring the bioavailability of metals need to be optimized taking into account the soil type, acidity, redox state and the individual contaminants. Copryright 2003 Elsevier B.V.

  5. Enhanced antimicrobial effect of organic acid washing against foodborne pathogens on broccoli by vacuum impregnation.

    Science.gov (United States)

    Kang, Jun-Won; Kang, Dong-Hyun

    2016-01-18

    This study was undertaken to evaluate the effect of vacuum impregnation applied to the washing process for removal of Salmonella Typhimurium and Listeria monocytogenes from broccoli surfaces. Broccoli was inoculated with the two foodborne pathogens and treated with simple dipping washing or with vacuum impregnation in 2% malic acid for 5, 10, 20, or 30 min. There were two methods of vacuum impregnation: continuous and intermittent. After 30 min of 101.3 kPa (=14.7 psi, simple dipping), 61.3 kPa (=8.9 psi), and 21.3 kPa (=3.1 psi) of continuous vacuum impregnation treatment, there were 1.6, 2.0, and 2.4 log 10 CFU/g reductions of S. Typhimurium and 1.5, 1.7, and 2.3 log 10 CFU/g reductions of L. monocytogenes, respectively. After 30 min of 101.3, 61.3, and 21.3 kPa of intermittent vacuum impregnation treatment, there were 1.5, 2.3, and 3.7 log 10 CFU/g reductions of S. Typhimurium and 1.6, 2.1, and 3.2 log 10 CFU/g reductions of L. monocytogenes, respectively. Scanning electron photomicrographs showed that bacteria tend to attach to or become entrapped in protective sites after simple wash processing (dipping). However, most bacteria were washed out of protective sites after intermittent treatment. Direct treatment of cell suspensions with vacuum impregnation showed that it had no inactivation capacity in itself since there were no significant differences (P ≥ 0.05) between the reduction rates of non- and vacuum impregnation treatment. These results demonstrate that the increased antimicrobial effect of vacuum impregnation can be attributed to increased accessibility of sanitizer and an enhanced washing effect in protected sites on produce. Color, texture and titratable acidity values of broccoli treated with intermittent vacuum impregnation in 2% malic acid for 30 min were not significantly (P ≥ 0.05) different from those of untreated samples even though a storage interval was needed for titratable acidity values to be reduced to levels comparable to those of

  6. Molecular dimensions and surface diffusion assisted mechanically robust slippery perfluoropolyether impregnated mesoporous alumina interfaces

    Science.gov (United States)

    Rowthu, Sriharitha; Balic, Edin E.; Hoffmann, Patrik

    2017-12-01

    Accomplishing mechanically robust omniphobic surfaces is a long-existing challenge, and can potentially find applications in bioengineering, tribology and paint industries. Slippery liquid impregnated mesoporous α-Al2O3 interfaces are achieved with water, alkanes, water based and oil based high viscosity acrylic paints. Incredibly high abrasion-resistance (wear coefficients ≤10‑8 mm3 N‑1 m‑1) and ultra-low friction coefficients (≥0.025) are attained, attributing to the hard alumina matrix and continuous replenishment of perfluoropolyether aided by capillarity and surface diffusion processes. A variety of impregnating liquids employed suggest that large molecules, faster surface diffusion and lowest evaporation rate generate the rare combination of high wear-resistance and omniphobicity. It is noteworthy that these novel liquid impregnated Al2O3 composites exhibit outstanding load bearing capacity up to 350 MPa; three orders of magnitude higher than achievable by the state of the art omniphobic surfaces. Further, our developed thermodynamic calculations suggest that the relative thermodynamic stability of liquid impregnated composites is linearly proportional to the spreading coefficient (S) of the impregnating liquid with the matrix material and is an important tool for the selection of an appropriate matrix material for a given liquid.

  7. Supercritical impregnation of cinnamaldehyde into polylactic acid as a route to develop antibacterial food packaging materials.

    Science.gov (United States)

    Villegas, Carolina; Torres, Alejandra; Rios, Mauricio; Rojas, Adrián; Romero, Julio; de Dicastillo, Carol López; Valenzuela, Ximena; Galotto, María José; Guarda, Abel

    2017-09-01

    Supercritical impregnation was used to incorporate a natural compound with antibacterial activity into biopolymer-based films to develop active food packaging materials. Impregnation tests were carried out under two pressure conditions (9 and 12MPa), and three depressurization rates (0.1, 1 and 10MPamin -1 ) in a high-pressure cell at a constant temperature equal to 40°C. Cinnamaldehyde (Ci), a natural compound with proven antimicrobial activity, was successfully incorporated into poly(lactic acid) films (PLA) using supercritical carbon dioxide (scCO 2 ), with impregnation yields ranging from 8 to 13% w/w. Higher pressure and slower depressurization rate seem to favor the Ci impregnation. The incorporation of Ci improved thermal, structural and mechanical properties of the PLA films. Impregnated films were more flexible, less brittle and more resistant materials than neat PLA films. The tested samples showed strong antibacterial activity against the selected microorganisms. In summary, this study provides an innovative route to the development of antibacterial biodegradable materials, which could be used in a wide range of applications of active food packaging. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Incorporation of Hyperbranched Supramolecules into Nafion Ionic Domains via Impregnation and In-Situ Photopolymerization

    Directory of Open Access Journals (Sweden)

    Hiruto Kudo

    2011-11-01

    Full Text Available Nafion membranes were impregnated with photocurable supramolecules, viz., hyperbranched polyester having pendant functional carboxylic acid groups (HBPEAc-COOH by swelling in methanol and subsequently photocured in-situ after drying. Structure-property relationships of the HBPEAc-COOH impregnated Nafion membranes were analyzed on the basis of Fourier transform infrared (FTIR spectroscopy, solid-state nuclear magnetic resonance (SSNMR and dynamic mechanical analysis (DMA. FTIR and SSNMR investigations revealed that about 7 wt % of HBPEAc-COOH was actually incorporated into the ionic domains of Nafion. The FTIR study suggests possible complexation via inter-species hydrogen bonding between the carboxylic groups of HBPEAc-COOH and the sulfonate groups of Nafion. The α-relaxation peak corresponding to the glass transition temperature of the ionic domains of the neat Nafion-acid form was found to increase from ~100 to ~130 °C upon impregnation with enhanced modulus afforded by the cured polyester network within the ionic domains. The AC impedance fuel cell measurement of the impregnated membrane exhibited an increasing trend of proton conductivity with increasing temperature, which eventually surpassed that of neat Nafion above 100 °C. Of particular importance is that the present paper is the first to successfully incorporate polymer molecules/networks into the Nafion ionic domains by means of impregnation with hyperbranched supramolecules followed by in-situ photopolymerization.

  9. Study of impregnating epoxy resins for high field NMR superconducting magnets

    International Nuclear Information System (INIS)

    Liang, G.; Luo, G.; Crowe, L.

    1996-01-01

    NMR magnet coils are usually quite long, thick, and tightly wound with thin superconducting wires. The successful vacuum/pressure impregnation of such kind of coils demands the use of epoxy resins with superior properties such as low viscosity, long pot life, and high cracking resistance etc. In order to find the most appropriate impregnating epoxy resin for the fabrication of high-field NMR magnet coils, the authors have studied several promising epoxy resins by viscosity, thermal shock, bonding/de-bonding measurements. The results of these measurements are presented. Model coils have been vacuum/pressure impregnated with selected epoxy resins and analyzed with scanning electronic microscope (SEM). It was found that among all of the studied epoxy resins the CTD-101K epoxy resin is most suitable for impregnation of coils. The test results of the model NbTi superconducting coil show that coils potted with CTD-101K do not quench until critical current of the superconductor is reached. This epoxy and the impregnation technique have been successfully applied to the first 400 MHz/89 mm actively shielded high resolution NMR magnet developed at Houston Advanced Research Center

  10. Stress intensity factor at the tip of cladding incipient crack in RIA-simulating experiments for high-burnup PWR fuels

    International Nuclear Information System (INIS)

    Udagawa, Yutaka; Suzuki, Motoe; Sugiyama, Tomoyuki; Fuketa, Toyoshi

    2009-01-01

    RIA-simulating experiments for high-burnup PWR fuels have been performed in the NSRR, and the stress intensity factor K 1 at the tip of cladding incipient crack has been evaluated in order to investigate its validity as a PCMI failure threshold under RIA conditions. An incipient crack depth was determined by observation of metallographs. The maximum hydride-rim thickness in the cladding of the test fuel rod was regarded as the incipient crack depth in each test case. Hoop stress in the cladding periphery during the pulse power transient was calculated by the RANNS code. K 1 was calculated based on crack depth and hoop stress. According to the RANNS calculation, PCMI failure cases can be divided into two groups: failure in the elastic phase and failure in the plastic phase. In the former case, elastic deformation was predominant around the incipient crack at failure time. K 1 is available only in this case. In the latter, plastic deformation was predominant around the incipient crack at failure time. Failure in the elastic phase never occurred when K 1 was less than 17 MPa m 1/2 . For failure in the plastic phase, the plastic hoop strain of the cladding periphery at failure time clearly showed a tendency to decrease with incipient crack depth. The combination of K 1 , for failure in the elastic phase, and plastic hoop strain at failure, for failure in the plastic phase, can be an effective index of PCMI failure under RIA conditions. (author)

  11. Kullback-Leibler distance-based enhanced detection of incipient anomalies

    KAUST Repository

    Harrou, Fouzi

    2016-09-09

    Accurate and effective anomaly detection and diagnosis of modern engineering systems by monitoring processes ensure reliability and safety of a product while maintaining desired quality. In this paper, an innovative method based on Kullback-Leibler divergence for detecting incipient anomalies in highly correlated multivariate data is presented. We use a partial least square (PLS) method as a modeling framework and a symmetrized Kullback-Leibler distance (KLD) as an anomaly indicator, where it is used to quantify the dissimilarity between current PLS-based residual and reference probability distributions obtained using fault-free data. Furthermore, this paper reports the development of two monitoring charts based on the KLD. The first approach is a KLD-Shewhart chart, where the Shewhart monitoring chart with a three sigma rule is used to monitor the KLD of the response variables residuals from the PLS model. The second approach integrates the KLD statistic into the exponentially weighted moving average monitoring chart. The performance of the PLS-based KLD anomaly-detection methods is illustrated and compared to that of conventional PLS-based anomaly detection methods. Using synthetic data and simulated distillation column data, we demonstrate the greater sensitivity and effectiveness of the developed method over the conventional PLS-based methods, especially when data are highly correlated and small anomalies are of interest. Results indicate that the proposed chart is a very promising KLD-based method because KLD-based charts are, in practice, designed to detect small shifts in process parameters. © 2016 Elsevier Ltd

  12. Incipiently drowned platform deposit in cyclic Ordovician shelf sequence: Lower Ordovician Chepultepec Formation, Virginia

    Energy Technology Data Exchange (ETDEWEB)

    Bova, J.A.; Read, J.F.

    1983-03-01

    The Chepultepec interval, 145 to 260 m (476 to 853 ft) thick, in Virginia contains the Lower Member up to 150 m (492 ft) thick, and the Upper Member, up to 85 m (279 ft) thick, of peritidal cyclic limestone and dolomite, and a Middle Member, up to 110 m (360 ft) thick, of subtidal limestone and bioherms, passing northwestward into cyclic facies. Calculated long term subsidence rates were 4 to 5 cm/1000 yr (mature passive margin rates), shelf gradients were 6 cm/km, and average duration of cycles was 140,00 years. Peritidal cyclic sequences are upward shallowing sequences of pellet-skeletal limestone, thrombolites, rippled calcisiltites and intraclast grainstone, and laminite caps. They formed by rapid transgression with apparent submergence increments averaging approximately 2 m (6.5 ft) in Lower Member and 3.5 m (11.4 ft), Upper Member. Deposition during Middle Member time was dominated by skeletal limestone-mudstone, calcisiltite with storm generated fining-upward sequences, and burrow-mixed units that were formed near fair-weather wave base, along with thrombolite bioherms. Locally, there are upward shallowing sequences, of basal wackestone/mudstone to calcisiltite to bioherm complexes (locally with erosional scalloped tops). Following each submergence, carbonate sedimentation was able to build to sea level prior to renewed submergence. Large submergence events caused tidal flats to be shifted far to the west, and they were unable to prograde out onto the open shelf because of insufficient time before subsidence was renewed, and because the open shelf setting inhibited tidal flat deposition. The Middle Member represents an incipiently drowned sequence that developed by repeated submergence events.

  13. Interactions of C+(2PJ) with rare gas atoms: incipient chemical interactions, potentials and transport coefficients

    Science.gov (United States)

    Tuttle, William D.; Thorington, Rebecca L.; Viehland, Larry A.; Breckenridge, W. H.; Wright, Timothy G.

    2018-03-01

    Accurate interatomic potentials were calculated for the interaction of a singly charged carbon cation, C+, with a single rare gas atom, RG (RG = Ne-Xe). The RCCSD(T) method and basis sets of quadruple-ζ and quintuple-ζ quality were employed; each interaction energy was counterpoise corrected and extrapolated to the basis set limit. The lowest C+(2P) electronic term of the carbon cation was considered, and the interatomic potentials calculated for the diatomic terms that arise from these: 2Π and 2Σ+. Additionally, the interatomic potentials for the respective spin-orbit levels were calculated, and the effect on the spectroscopic parameters was examined. In doing this, anomalously large spin-orbit splittings for RG = Ar-Xe were found, and this was investigated using multi-reference configuration interaction calculations. The latter indicated a small amount of RG → C+ electron transfer and this was used to rationalize the observations. This is taken as evidence of an incipient chemical interaction, which was also examined via contour plots, Birge-Sponer plots and various population analyses across the C+-RG series (RG = He-Xe), with the latter showing unexpected results. Trends in several spectroscopic parameters were examined as a function of the increasing atomic number of the RG atom. Finally, each set of RCCSD(T) potentials was employed, including spin-orbit coupling to calculate the transport coefficients for C+ in RG, and the results were compared with the limited available data. This article is part of the theme issue `Modern theoretical chemistry'.

  14. Incipient balancing selection through adaptive loss of aquaporins in natural Saccharomyces cerevisiae populations.

    Science.gov (United States)

    Will, Jessica L; Kim, Hyun Seok; Clarke, Jessica; Painter, John C; Fay, Justin C; Gasch, Audrey P

    2010-04-01

    A major goal in evolutionary biology is to understand how adaptive evolution has influenced natural variation, but identifying loci subject to positive selection has been a challenge. Here we present the adaptive loss of a pair of paralogous genes in specific Saccharomyces cerevisiae subpopulations. We mapped natural variation in freeze-thaw tolerance to two water transporters, AQY1 and AQY2, previously implicated in freeze-thaw survival. However, whereas freeze-thaw-tolerant strains harbor functional aquaporin genes, the set of sensitive strains lost aquaporin function at least 6 independent times. Several genomic signatures at AQY1 and/or AQY2 reveal low variation surrounding these loci within strains of the same haplotype, but high variation between strain groups. This is consistent with recent adaptive loss of aquaporins in subgroups of strains, leading to incipient balancing selection. We show that, although aquaporins are critical for surviving freeze-thaw stress, loss of both genes provides a major fitness advantage on high-sugar substrates common to many strains' natural niche. Strikingly, strains with non-functional alleles have also lost the ancestral requirement for aquaporins during spore formation. Thus, the antagonistic effect of aquaporin function-providing an advantage in freeze-thaw tolerance but a fitness defect for growth in high-sugar environments-contributes to the maintenance of both functional and nonfunctional alleles in S. cerevisiae. This work also shows that gene loss through multiple missense and nonsense mutations, hallmarks of pseudogenization presumed to emerge after loss of constraint, can arise through positive selection.

  15. Interactions of C+(2 PJ ) with rare gas atoms: incipient chemical interactions, potentials and transport coefficients.

    Science.gov (United States)

    Tuttle, William D; Thorington, Rebecca L; Viehland, Larry A; Breckenridge, W H; Wright, Timothy G

    2018-03-13

    Accurate interatomic potentials were calculated for the interaction of a singly charged carbon cation, C + , with a single rare gas atom, RG (RG = Ne-Xe). The RCCSD(T) method and basis sets of quadruple-ζ and quintuple-ζ quality were employed; each interaction energy was counterpoise corrected and extrapolated to the basis set limit. The lowest C + ( 2 P ) electronic term of the carbon cation was considered, and the interatomic potentials calculated for the diatomic terms that arise from these: 2 Π and 2 Σ + Additionally, the interatomic potentials for the respective spin-orbit levels were calculated, and the effect on the spectroscopic parameters was examined. In doing this, anomalously large spin-orbit splittings for RG = Ar-Xe were found, and this was investigated using multi-reference configuration interaction calculations. The latter indicated a small amount of RG → C + electron transfer and this was used to rationalize the observations. This is taken as evidence of an incipient chemical interaction, which was also examined via contour plots, Birge-Sponer plots and various population analyses across the C + -RG series (RG = He-Xe), with the latter showing unexpected results. Trends in several spectroscopic parameters were examined as a function of the increasing atomic number of the RG atom. Finally, each set of RCCSD(T) potentials was employed, including spin-orbit coupling to calculate the transport coefficients for C + in RG, and the results were compared with the limited available data.This article is part of the theme issue 'Modern theoretical chemistry'. © 2018 The Author(s).

  16. Persistently elevated right ventricular index of myocardial performance in preterm infants with incipient bronchopulmonary dysplasia.

    Directory of Open Access Journals (Sweden)

    Christoph Czernik

    Full Text Available OBJECTIVES: Elevated pulmonary vascular resistance occurs during the first days after birth in all newborn infants and persists in infants at risk for bronchopulmonary dysplasia (BPD. It is difficult to measure in a non-invasive fashion. We assessed the usefulness of the right ventricular index of myocardial performance (RIMP to estimate pulmonary vascular resistance in very low birth weight infants. STUDY DESIGN: Prospective echocardiography on day of life (DOL 2, 7, 14, and 28 in 121 preterm infants (median [quartiles] gestational age 28 [26]-[29] weeks, birth weight 998 [743-1225] g of whom 36 developed BPD (oxygen supplementation at 36 postmenstrual weeks. RESULTS: RIMP derived by conventional pulsed Doppler technique was unrelated to heart rate or mean blood pressure. RIMP on DOL 2 was similar in infants who subsequently did (0.39 [0.33-0.55] and did not develop BPD (0.39 [0.28-0.51], p = 0.467. RIMP declined steadily in non-BPD infants but not in BPD infants (DOL 7: 0.31[0.22-0.39] vs. 0.35[0.29-0.48], p = 0.014; DOL 14: 0.23[0.17-0.30] vs. 0.35[0.25-0.43], p<0.001; DOL 28: 0.21[0.15-0.28] vs. 0.31 [0.21-0.35], p = 0.015. CONCLUSIONS: In preterm infants, a decline in RIMP after birth was not observed in those with incipient BPD. The pattern of RIMP measured in preterm infants is commensurate with that of pulmonary vascular resistance.

  17. History of the incipient Icelandic plume: Observations from ancient buried landscapes

    Science.gov (United States)

    Stucky de Quay, Gaia; Roberts, Gareth G.; Watson, Jonathan S.; Jackson, Christopher A.-L.

    2017-04-01

    Ancient buried terrestrial landscapes contain records of vertical motions which can be used to probe histories of geodynamical processes. In the North Atlantic Ocean, sedimentary basins contain excellent evidence that the continental shelf experienced staged subaerial exposure. For example, now buried landscapes were uplifted, rapidly eroded, and drowned close to the Paleocene-Eocene boundary. We use commercial wells and three-dimensional seismic data to reconstruct a 57-55 Ma landscape now buried 1.5 km beneath the seabed in the Bressay area of the northern North Sea. Geochemical analyses of organic matter from core samples intersecting the erosional landscape indicate the presence of angiosperm (flowering plant) debris. Combined with the presence of coarse clastic material, mapped beach ridges, and dendritic drainage patterns, these observations indicate that this landscape was of terrestrial origin. Longitudinal profiles of ancient rivers were extracted and inverted for an uplift rate history. The best-fitting uplift rate history has three phases and total cumulative uplift of 350 m. Biostratigraphic data from surrounding marine stratigraphy indicate that this landscape formed within 1-1.5 Ma. This uplift history is similar to that of a slightly older buried landscape in the Faeroe-Shetland basin 400 km to the west. These records of vertical motion can explained by pulses of anomalously hot asthenosphere spreading out from the incipient Icelandic plume. Using simple isostatic calculations we estimate that the maximum thermal anomaly beneath Bressay was 50˚. Our observations suggest that a thermal anomaly departed the Icelandic plume as early as 58.5 Ma and had highest average temperatures at 55.6 Ma.

  18. Fluid flow and mud volcanism in the Eastern Mediterranean incipient collision zones

    Science.gov (United States)

    Zitter, T. A. C.; Woodside, J. M.; Mascle, J.

    2003-04-01

    Fluid venting activity, either coupled with mud volcanism or along deep active faults or both, has been investigated in the Eastern Mediterranean Sea, mainly in two areas associated with the incipient collision process between Africa and Eurasia. Mud volcanoes are abundant on the crestal part of the Mediterranean Ridge accretionary prism, in association with thrusts, back-thrusts and transcurrent features. They are also found in the Anaximander Mountains/Florence Rise area, to the west of Cyprus, where a wrench system accommodates the pre-collisional deformation. Combined swath multibeam bathymetry and imagery, seismic profiling (ANAXIPROBE survey, 1995 and PRISMED II survey, 1998) and O.R.E.Tech sidescan sonar data (MEDINETH survey, 1999) indicate the genetic relationship between mud volcanoes and tectonics, particularly potential influence of strike-slip faulting. The in situ observations of mud volcanoes (MEDINAUT survey, 1998) have revealed common characteristics at cold seeps, such as carbonate crust constructions and specific chemosynthetic-based fauna. Ground-truth of the sonar data shows that the geophysical signature of mud volcanoes may be related to spatial and temporal evolution of mud volcanism activity, because the seafloor characteristics (surface of the mud flows, distribution and nature of the crusts) and the degree of colonization by benthic fauna vary with the intensity and age of the fluid seepage. Moreover, clay mineralogy studies on the mud matrix samples give insights into the depositional environment, age, and depth of the lithological unit from which the mud breccia is extruded. The shallow signature of the mud reservoir tends to indicate that the overpressured fluids originate from deeper strata than the solid phase of the expelled material.

  19. Analysis of platinum content in biodegradable carboplatin-impregnated beads and retrospective assessment of tolerability for intralesional use of the beads in dogs following excision of subcutaneous sarcomas: 29 cases (2011-2014).

    Science.gov (United States)

    Hess, Theresa A; Drinkhouse, Macy E; Prey, Joshua D; Miller, Jonathan M; Fettig, Arthur A; Carberry, Carol A; Brenn, Stephen H; Bailey, Dennis B

    2018-02-15

    OBJECTIVE To evaluate platinum content in biodegradable carboplatin-impregnated beads and retrospectively assess tolerability and outcome data for dogs treated by intralesional placement of such beads following surgical excision of subcutaneous sarcomas. DESIGN Evaluation study and retrospective case series. SAMPLE 9 carboplatin-impregnated beads and 29 client-owned dogs. PROCEDURES Platinum content in 9 carboplatin-impregnated beads from 3 lots was measured by spectrophotometry, and calculated carboplatin content was compared with the labeled content. Medical records were searched to identify dogs with subcutaneous sarcomas for which treatment included placement of carboplatin-impregnated beads between 2011 and 2014. Signalment, tumor characteristics, surgical and histologic data, adverse events, and local recurrences were recorded. Associations between variables of interest and adverse events or local disease-free interval were analyzed. RESULTS In vitro analysis identified a mean ± SD platinum content of 5.38 ± 0.97 mg/bead. Calculated carboplatin content (10.24 ± 1.84 mg/bead) was significantly greater than the labeled amount (4.6 mg/bead). Bead weight and total platinum content differed significantly among lots, but platinum content per bead weight did not. Mild-to-moderate local adverse events were reported for 11 of 29 tumors; all resolved without additional surgery. No dogs had signs of systemic toxicosis. Overall local disease-free rates 1, 2, and 3 years after surgery were 70%, 70%, and 58%, respectively, as determined by Kaplan-Meier analysis. CONCLUSIONS AND CLINICAL RELEVANCE Carboplatin-impregnated beads were well tolerated; however, results of in vitro tests indicated that caution is needed because of manufacturing inconsistencies.

  20. Dielectric microwave absorbing material processed by impregnation of carbon fiber fabric with polyaniline

    Directory of Open Access Journals (Sweden)

    Luiza de Castro Folgueras

    2007-03-01

    Full Text Available It is a known fact that the adequate combination of components and experimental conditions may produce materials with specific requirements. This study presents the effect of carbon fiber fabric impregnation with polyaniline conducting polymer aiming at the radar absorbing material processing. The experiments consider the sample preparation with one and two impregnations. The prepared samples were evaluated by reflectivity measurements, in the frequency range of 8-12 GHz and scanning electron microscopy analyses. The correlation of the results shows that the quantity of impregnated material influences the performance of the processed microwave absorber. This study shows that the proposed experimental route provides flexible absorbers with absorption values of the incident radiation close to 87%.

  1. Pore structure, mechanical properties and polymer characteristics of porous materials impregnated with methylmethacrylate

    International Nuclear Information System (INIS)

    Hastrup, K.

    1976-05-01

    The pore structure of porous materials plays a decisive role with regard to many properties of the materials. One therefore expects property improvement due to impregnation to be mostly brought about as a result of pore structure modification. This supposition formed the basis for the project here presented, which had the main aim of investigating polymer impregnation in relation to pore structure. Objectives were: 1) to examine the pore structure of hardened cement paste, beech wood and porous glass before and after gas-phase impregnation with methyl-methacrylate monomer and in situ polymerization, 2) to investigate the influence of the pore structure on the molecular weight of the polymer, 3) to investigate the influence of the degree of pore filling on the elastic modulus, damping coefficient and bending strength. (author)

  2. In situ treatment of concrete surfaces by organic impregnation and polymerization

    International Nuclear Information System (INIS)

    Ursella, P.; Moretti, G.; Pellecchia, V.

    1990-01-01

    The impregnation by resins of concrete structures is a process well known at PIC (Polymer Impregnated Concrete). This process improves the physical-chemical features of concrete matrixes in order to extend their durability when severe environmental conditions may occur. The main objective of this research contract has been the verification of a proper impregnation 'in situ' of existing concrete surfaces, of any laying in the space, by means of a prototype machine, expressly designed and implemented, and verification of the increase of mechanical resistance, leach resistance, durability of treated material. In a nuclear facility this goal is very important in relation to the long term integrity of concrete structures during operating lifetime and, in particular, after final shutdown. (author)

  3. Controllable Impregnation Via Inkjet Printing for the Fabrication of Solid Oxide Cell Air Electrodes

    KAUST Repository

    Da'as, E. H.

    2013-10-07

    The impregnation method has been considered as one of the most successful techniques for the fabrication of highly efficient electrodes for solid oxide fuel and electrolysis cells (SOCs) at the lab scale. However, because the impregnation is usually performed manually, its irreproducibility remains a major problem that can be solved by using controllable techniques, such as inkjet printing. In this paper, lanthanum strontium manganite (LSM)/yttria stabilized zirconia (YSZ) air electrodes were prepared by infiltrating YSZ porous bodies with LSM precursor solution using inkjet printing, followed by annealing at 800°C for 2 hours. XRD analysis confirmed the formation of the LSM phase, which was in the form of nanoparticles with size in the 50-70 nm range on the YSZ walls, as revealed by FEG-SEM observations. The effect of printing parameters on the distribution of the impregnated phase was investigated and discussed.

  4. Solvent impregnated resin for isolation of U(VI) from industrial wastes

    International Nuclear Information System (INIS)

    Karve, M.; Rajgor, R.V.

    2008-01-01

    A solid-phase extraction method based upon impregnation of Cyanex 302 (bis(2,4,4- trimethylpentyl)mono-thio-phosphinic acid) on Amberlite XAD-2 resin is proposed for isolation of U(VI) from uranmicrolite ore tailing samples and industrial effluent samples. U(VI) was sorbed from nitric acid media on the solvent-impregnated resin (SIR) and was recovered completely with 1.0 M HCl. Based upon sorption behavior of U(VI) with Cyanex 302, it was quantitatively sorbed on the SIR in a dynamic method, while the other metal ions were not sorbed by the modified resin. The preparation of impregnated resin is simple, based upon physical interaction of the extractant and solid support, has good sorption capacity for U(VI), and is also reliable for detection of traces of U(VI). (authors)

  5. Impact of KCl impregnation on single particle combustion of wood and torrefied wood

    DEFF Research Database (Denmark)

    Lu, Zhimin; Jian, Jie; Jensen, Peter Arendt

    2017-01-01

    In this work, single particle combustion of raw and torrefied 4 mm wood particles with different potassium content obtained by KCl impregnation and washing was studied experimentally under a condition of 1225 °C, 3.1% O2 and 26.1% H2O. The ignition time and devolatilization time depended almost......, and unchanged by torrefaction. Compared to the raw wood particle, the char conversion time was increased by torrefaction, decreased by washing, and almost unchanged by KCl impregnation due to its promoting effect on both char yield and reactivity....

  6. Comment on the mechanism of operation of the impregnated tungsten cathode

    Science.gov (United States)

    Forman, R.

    1979-01-01

    Recent life-test measurements, over 20,000-30,000 h, on impregnated tungsten cathodes in tubes employing an open-type electron-gun structure, show emission current degradation with time. This is in contrast to those recently published by Rittner on B-type cathodes, run in close-spaced diodes, taken some years ago. These more recent life-test results are consistent with the model suggested by Forman and disputed by Rittner that the barium coverage on an impregnated cathode is less than a monolayer for most of its life and decreases with time.

  7. Physical and Mechanical Properties of Three Polystyrene Impregnated Indonesian Wood Species

    OpenAIRE

    Hadjib, Nurwati

    2005-01-01

    The disadvantage of  fast-growing species is  that they have inferior physical and mechanical properties. Polystyrene impregnation can be applied to improve physical and mechanical properties. Wood samples, which were dried  until 10% moisture content were put into impregnating tank and vacuum pressured  at 20-mm Hg  for  two hours. During  the gradual release of  vacuum, styrene monomers,  vinyl acetate  monomers  and  terburyl-peroxide catalyst was streamed  into  the tank. Afterwards, the ...

  8. Electrochemical in-situ impregnation of wood using a copper nail as source for copper

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Block, Thomas; Nymark, Morten

    2011-01-01

    A new method for copper impregnation of wood in structures was suggested and tested in laboratory scale with specimen of new pine sapwood. A copper nail and a steel screw were placed in the wood, and an electric direct current field was applied, so the copper nail was anode and the screw...... was cathode. At the anode, copper ions were generated. The copper ions were transported into the wood by electromigration (movement of ions in an applied electric field) towards the cathode, and a volume between the two electrodes was thereby impregnated. Copper also moved to a lesser degree in the opposite...

  9. Radiation-curable impregnating agents for the conservation of archaeologic wooden objects. Part 2

    International Nuclear Information System (INIS)

    Schaudy, R.; Wendrinsky, J.; Kalteis, H.; Grienauer, W.

    1982-12-01

    As a continuation of the work described in OEFZS Ber. No. 4165, impregnating agents curable by ionizing radiation, such as free radical polymerizable monomers or artificial resins, have been investigated. Specific weight and viscosity of the liquid mixtures have been as well determined as the specific weight and gel content of the gamma radiation-cured samples. Hardness and elastic behaviour have been estimated only. The shrinkage during hardening was found to be 5 to 12 % for low viscous mixtures (up to 600 mPa.s) and 3 to 8 % for higher viscous impregnating agents. The results are to be discussed. (Author) [de

  10. Out-of-Plane Self-Propulsion of Droplets on Heated Lubricant-Impregnated Surfaces

    Science.gov (United States)

    Dash, Susmita; de Ruiter, Jolet; Varanasi, Kripa

    2016-11-01

    In this work, we investigate droplet motion on lubricant-impregnated surfaces that are stable at high temperatures. Water droplets on such surfaces demonstrate in-plane hopping motion and out-of-plane self-propulsion at temperatures far below the typical Leidenfrost temperatures. While the in-plane motion of the droplet is on the order of 10 mm/s, the droplet is propelled vertically upwards at a velocity of approximately 200 mm/s. We present the mechanics underlying this behavior of droplets, which is specific to lubricant-impregnated surfaces.

  11. A Combined Electro-Thermal Breakdown Model for Oil-Impregnated Paper

    Directory of Open Access Journals (Sweden)

    Meng Huang

    2017-12-01

    Full Text Available The breakdown property of oil-impregnated paper is a key factor for converter transformer design and operation, but it is not well understood. In this paper, breakdown voltages of oil-impregnated paper were measured at different temperatures. The results showed that with the increase of temperature, electrical, electro-thermal and thermal breakdown occurred successively. An electro-thermal breakdown model was proposed based on the heat equilibrium and space charge transport, and negative differential mobility was introduced to the model. It was shown that carrier mobility determined whether it was electrical or thermal breakdown, and the model can effectively explain the temperature-dependent breakdown.

  12. Xe-133 recuperation by adsorption in active carbon impregnated with PF5

    International Nuclear Information System (INIS)

    Mondino, A.V.; Marques, R.O.

    1990-01-01

    Since the Mo-99 Fission Project has the aim to produce Xe-133 from gases generated in the alkaline dissolution of Al-U plates irradiated with thermal neutrons and, considering the importance of this radioisotope from the nuclear medicine point of view, studies to improve and optimize the Xe-133 recuperation were continued. Experiences were made on 'static' equilibrium employing high purity xenon and for the 'dynamic' case, Xe-133 mixed with a carrier and nitrogen as gas carrier; in this case, a 44% and a 34% increase in the capacity of xenon adsorption relaxed with activated carbon without being impregnated and impregnated with AgF, were respectively achieved. (Author) [es

  13. A Binder Viscosity Effect on the Wet-Wounded Composite Porosity in the Impregnating Bath

    Directory of Open Access Journals (Sweden)

    M. A. Komkov

    2014-01-01

    Full Text Available The aim of this work is to define experimentally an impregnation rate of VM-1 glass fibers and CBM aramid bundles with the epoxy binder EDB-10 using wet method of winding. During the impregnation process of the fibrous fillers by the liquid binder, air is displaced from the interfiber space of fiber and bundle. With the composite product winding a fiber impregnation process is short. That is why gas inclusions or pores are formed in the polymer-fiber compositeThe impregnation rate or porosity of wound material will depend directly on the binder viscosity. To reduce an epoxy binder viscosity temporarily is possible by two ways. The first is to heat a liquid epoxy composition EDB-10 to the maximum possible temperature during the winding process of the product. The second method is to dilute the binder by a solvent, such as acetone or alcohol. However, the solvent reduces its strength.The paper presents experimental data to show the volumetric content of pores in the wound composite affected only by the viscosity of the epoxy binder. Heating a binder allowed us to regulate a changing conditional viscosity of the binder in the impregnating bath for the normal conditions of impregnation. Other impacts on the impregnation and filament-winding processes, such as filler kinks, squeeze, vacuuming binder, highly tensioned winding, and others were not used.Experimentally obtained dependences of the porosity value of wound composite on the conditional viscosity of binder are nonlinear and can be used to design heaters for impregnating devices of winders. The research technique and results can be used in development of technological processes to manufacture composite structures by winding from the other reinforcing fibrous fillers and thermo-active binders.The results show that the volumetric content of pores can significantly vary within 8 - 14 % of material volume. Therefore, to reduce the number of pores in the wound composite to 1-2 %, auxiliary

  14. Influence of impregnation by inorganic substances on the yield of pyrolysis products

    Energy Technology Data Exchange (ETDEWEB)

    Shevkoplyas, V.N.; Saranchuk, V.I. [AN Ukrainskoj SSR, Donetsk (Ukraine). Inst. Fiziko-Organicheskoj Khimii i Uglekhimii

    1998-09-01

    In papers was shown that fossil coals impregnation by aqueous solution of inorganic substances with a subsequent pyrolysis leads to the rise of the rate and depth of its organic mass destruction into liquid and gaseous products. This is, apperently, conditioned by changes in coals structure already on the stage of treatment. But, there are few papers that study an activating effect of inorganic reactants upon natural coals structure and their behaviour at pyrolysis. One of the methods which allows to judge structural transformation in coals at their impregnation by inorganic substances is an X-ray analysis. (orig.)

  15. Population structure of guppies in north-eastern Venezuela, the area of putative incipient speciation.

    Science.gov (United States)

    Herdegen, Magdalena; Alexander, Heather J; Babik, Wiesław; Mavárez, Jesús; Breden, Felix; Radwan, Jacek

    2014-02-17

    Geographic barriers to gene flow and divergence among populations in sexual traits are two important causes of genetic isolation which may lead to speciation. Genetic isolation may be facilitated if these two mechanisms act synergistically. The guppy from the Cumaná region (within the Cariaco drainage) of eastern Venezuela has been previously described as a case of incipient speciation driven by sexual selection, significantly differentiated in sexual colouration and body shape from the common guppy, Poecilia reticulata. The latter occurs widely in northern Venezuela, including the south-eastern side of Cordillera de la Costa, where it inhabits streams belonging to the San Juan drainage. Here, we present molecular and morphological analyses of differentiation among guppy populations in the Cariaco and San Juan drainages. Our analyses are based on a 953 bp long mtDNA fragment, a set of 15 microsatellites (519 fish from 20 populations), and four phenotypic traits. Both microsatellite and mtDNA data showed that guppies inhabiting the two drainages are characterised by a significant genetic differentiation, but a higher proportion of the genetic variance was distributed among populations within regions. Most guppies in the Cariaco drainage had mtDNA from a distinct lineage, but we also found evidence for widespread introgression of mtDNA from the San Juan drainage into the Cariaco drainage. Phenotypically, populations in the two regions differed significantly only in the number of black crescents. Phenotypic clustering did not support existence of two distinct groupings, but indicated a degree of distinctiveness of Central Cumaná (CC) population. However, CC population showed little differentiation at the neutral markers from the proximate populations within the Cariaco drainage. Our findings are consistent with only partial genetic isolation between the two geographic regions and indicate that the geographic barrier of Cordillera de la Costa has not played an

  16. Selective recovery of a pyridine derivative from an aqueous waste stream containing acetic acid and succinonitrile with solvent impregnated resins

    NARCIS (Netherlands)

    Bokhove, J.; Visser, T.J.; Schuur, Boelo; de Haan, A.B.

    2015-01-01

    Solvent impregnated resins (SIRs) were evaluated for the recovery of pyridine derivatives from an aqueous waste-stream containing also acetic acid and succinonitrile. For this purpose, a new solvent was developed, synthesized and impregnated in Amberlite XAD4. Sorption studies were used to determine

  17. Ordered mesoporous silica to study the preparation of Ni/Si2 ex nitrate catalysts: impregnation, drying, and thermal treatments

    NARCIS (Netherlands)

    Sietsma, J.R.A.; Meeldijk, J.D.; Versluijs-Helder, M.; Broersma, A.; van Dillen, A.J.; de Jongh, P.E.; de Jong, K.P.

    2008-01-01

    In this contribution, we investigated the preparation of Ni/SiO2 catalysts with aqueous [Ni(OH2)6](NO3)2 solutions via the impregnation and drying method using ordered mesoporous silica SBA-15 (mesopore diameter of 9 nm) as model support to study each step in the preparation: impregnation, drying,

  18. Petrogenesis of incipient charnockite in the Ikalamavony sub-domain, south-central Madagascar: New insights from phase equilibrium modeling

    Science.gov (United States)

    Endo, Takahiro; Tsunogae, Toshiaki; Santosh, M.; Shaji, E.; Rambeloson, Roger A.

    2017-06-01

    Incipient charnockites representing granulite formation on a mesoscopic scale occur in the Ambodin Ifandana area of Ikalamavony sub-domain in south-central Madagascar. Here we report new petrological data from these rocks, and discuss the process of granulite formation on the basis of petrography, mineral equilibrium modeling, and fluid inclusion studies. The incipient charnockites occur as brownish patches, lenses, and layers characterized by an assemblage of biotite + orthopyroxene + K-feldspar + plagioclase + quartz + magnetite + ilmenite within host orthopyroxene-free biotite gneiss with an assemblage of biotite + K-feldspar + plagioclase + quartz + magnetite + ilmenite. Lenses and layers of calc-silicate rock (clinopyroxene + garnet + plagioclase + quartz + titanite + calcite) are typically associated with the charnockite. Coarse-grained charnockite occurs along the contact between the layered charnockite and calc-silicate rock. The application of mineral equilibrium modeling on the mineral assemblages in charnockite and biotite gneiss employing the NCKFMASHTO system as well as fluid inclusion study on coarse-grained charnockite defines a P-T range of 8.5-10.5 kbar and 880-900 °C, which is nearly consistent with the inferred P-T condition of the Ikalamavony sub-domain (8.0-10.5 kbar and 820-880 °C). The result of T versus H2O activity (a(H2O)) modeling demonstrates that orthopyroxene-bearing assemblage in charnockite is stable under relatively low a(H2O) condition of 0.42-0.43, which is consistent with the popular models of incipient-charnockite formation related to the lowering of water activity and stabilization of orthopyroxene through dehydration of biotite. The occurrence of calc-silicate rocks adjacent to the charnockite suggests that the CO2-bearing fluid that caused dehydration and incipient-charnockite formation might have been derived through decarbonation of calc-silicate rocks during the initial stage of decompression slightly after the peak

  19. Computational analysis of the interaction between impregnation, forming and curing in pultrusion

    NARCIS (Netherlands)

    Carlone, Pierpaolo; Baran, Ismet; Akkerman, Remko; Palazzo, Gaetano S.

    2015-01-01

    Numerical and analytical models dealing with different physics involved in pultrusion are combined in the optic of an integrated analysis of the process. The impregnation stage is simulated by means of a CFD multiphase model, evaluating the pressure and velocity field in the liquid resin. Composite

  20. Moisture effect on the dielectric response and space charge behaviour of mineral oil impregnated paper insulation

    International Nuclear Information System (INIS)

    Hao Jian; Liao Ruijin; Chen, George

    2011-01-01

    Dielectric response and space charge behaviour of oil-paper insulation sample with different moisture contents were investigated using the frequency dielectric spectroscopy (FDS) and the pulsed electroacoustic (PEA) technique, respectively. The influence of moisture on the dielectric response and space charge behaviour of oil impregnated paper insulation was analysed. Results show that the moisture has great effect on the FDS and space charge behaviour of oil impregnated paper insulation. In the frequency range of 10 -2 ∼10 6 Hz, the conductivity and the capacitance of oil impregnated paper increases with its moisture content. The space charge distribution of oil-paper sample with lower and higher moisture contents is very different from each other. The higher the moisture concentration of the oil impregnated paper, the easier the negative charge penetration into the insulation paper. There is a significant amount of positive charge accumulated at the paper-paper interface near to the cathode for oilpaper sample with lower moisture content. However, the positive charge appears in the middle layer paper for oil-paper sample with higher moisture content. Due to the high conductivity, the charge trapped in the oil-paper sample with higher moisture content disappears much faster than that in the oil-paper sample with lower moisture content after removing the voltage.

  1. Process for making 90 degree K. superconductors by impregnating cellulosic article with precursor solution

    International Nuclear Information System (INIS)

    Bolt, J.D.; Subramanian, M.A.

    1991-01-01

    This patent describes an improved process for preparing a shaped article of a superconducting composition having the formula MBa 2 Cu 3 O x wherein; M is selected from the group consisting of Y, Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb and Lu; x is from about 6.5 to about 7.0; the composition having a superconducting transition temperature of about 90 K. It comprises: forming in acetic acid a mixture of M(C 2 H 3 O 2 ) 3 , barium acetate and copper acetate in an atomic ratio of M:Ba:Cu of about 1:2:3; heating the resulting mixture to boiling, and adding sufficient formic acid to dissolve any undissolved starting material while continuing to boil the solution; contacting an article of cellulose material with the solution thereby impregnating the article with the solution, the article having the shape desired; removing excess solution from the resulting impregnated article of cellulose material and drying the impregnated article; heating the impregnated article of cellulose material to a temperature from about 850 degree C to about 925 degree C in an oxygen-containing atmosphere for a time sufficient to form MBa 2 Cu 3 O y , where y is from about 6.0 to about 6.5, the heating effecting carbonization of the cellulose material and oxidization of carbon without ignition; and maintaining the resulting article in an oxygen-containing atmosphere while cooling for a time sufficient to obtained the desired product

  2. Swelling kinetics and impregnation of PLA with thymol under supercritical CO2 conditions

    Directory of Open Access Journals (Sweden)

    Milovanović Stoja L.

    2016-01-01

    Full Text Available The present work was aimed to study swelling kinetics of polylactic acid (PLA and its impregnation with thymol in supercritical carbon dioxide (scCO2 medium. The influences of temperature and soaking time on the swelling kinetics and impregnation yield of PLA cylindrical disc and film were investigated. Swelling experiments were performed in a high pressure view cell at 10 MPa and temperatures of 40°C, 60°C and 75°C for 2 to 24 h. On the basis of swelling kinetics, pressure of 10 MPa and temperature of 40°C were chosen for supercritical solvent impregnation (SSI of the PLA samples during 2 to24 h. The highest swelling extent was observed for the PLA monolith after 24 h treatment with pure scCO2 (7.5% and scCO2 with thymol (118.3%. It was shown that sufficiently high amount of thymol can be loaded into both PLA monolith and film using SSI after only 2 h (10.0% and 6.6%, respectively. Monolith and film of PLA impregnated with thymol could be suitable for active food packaging and sterile medical disposables.

  3. Sorption kinetics for the removal of aldehydes from aqueous streams with extractant impregnated resins

    NARCIS (Netherlands)

    Babic, K.; van der Ham, Aloysius G.J.; de Haan, A.B.

    2008-01-01

    The sorption kinetics for the removal aldehydes from aqueous solutions with Amberlite XAD-16 and MPP particles impregnated with Primene JM-T was investigated. A model, accounting for the simultaneous mass transfer and chemical reaction, is developed to describe the process. It is based on the

  4. Impacts of impregnation with boric acid and borax on the red colour ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-08-18

    Aug 18, 2009 ... weights of the growing rings may also result in color dis- tinction. By the chemical degradation of extractive mate- ... dipping method (Atar et al., 2007). It was assessed that the impregnation of hardwoods ... sed a decrease of 8 - 12% in the red color tone of dif- ferent wood types (Ors et al., 2005). Scotch pine ...

  5. Ecological risks of an old wood impregnation mill: application of the triad approach.

    NARCIS (Netherlands)

    Karjalainen, A.-M.; Kilpi-Koski, J.; Väisänen, A.O.; Penttinen, S.; van Gestel, C.A.M.; Penttinen, O.-P.

    2009-01-01

    Although many studies deal with the distribution and mobility of chromated copper arsenate (CCA) metals in soil, the ecotoxicity of CCA-contaminated soils is rarely studied. The Triad approach was applied to determine the ecological risks posed by a CCA mixture at a decommissioned wood impregnation

  6. Anti-triatomine saliva immunoassays for the evaluation of impregnated netting trials against Chagas disease transmission

    Czech Academy of Sciences Publication Activity Database

    Schwarz, Alexandra; Juarez, J. A.; Richards, J.; Rath, B.; Machaca, V. Q.; Castro, Y. E.; Málaga, E. S.; Levy, K.; Gilman, R. H.; Bern, C.; Verastegui, M.; Levy, M. Z.

    2011-01-01

    Roč. 41, č. 6 (2011), s. 591-594 ISSN 0020-7519 R&D Projects: GA ČR GPP302/11/P798 Institutional research plan: CEZ:AV0Z60220518 Keywords : Triatoma infestans * Impregnated net * Sentinel guinea pig * Saliva * Antibody response Subject RIV: EC - Immunology Impact factor: 3.393, year: 2011

  7. Clinical evaluation of a PHMB-impregnated biocellulose dressing on paediatric lacerations

    NARCIS (Netherlands)

    Elzinga, G.; van Doorn, J.; Wiersema, A. M.; Klicks, R. J.; Andriessen, A.; Alblas, J. G.; Spits, H.; Post, A.; van Gent, M.

    2011-01-01

    Objective: To evaluate the clinical benefits, primarily tolerability and reduction in pain levels, associated with the use of a PHMB-impregnated biosynthetic cellulose dressing (Suprasorb X + PHMB) on paediatric heel lacerations. Method: These lacerations were caused when children, who were being

  8. Bacterial Adhesion Forces to Ag-Impregnated Contact Lens Cases and Transmission to Contact Lenses

    NARCIS (Netherlands)

    Qu, Wenwen; Busscher, Henk J.; van der Mei, Henny C.; Hooymans, Johanna M. M.

    Purpose: To measure adhesion forces of Pseudomonas aeruginosa, Staphylococcus aureus, and Serratia marcescens to a rigid contact lens (CL), standard polypropylene, and Ag-impregnated lens cases using atomic force microscopy and determine bacterial transmission from lens case to CL. Methods: Adhesion

  9. Use of Vancomycin-Impregnated Calcium Sulfate in the Treatment of Osteomyelitis of the Jaw.

    Science.gov (United States)

    Sun, Hai-Jiang; Xue, Lei; Wu, Chuan-Bin; Zhou, Qing

    2017-01-01

    The aim of this study was to describe the effect of vancomycin-impregnated calcium sulfate in the treatment of osteomyelitis of the jaw. Twelve patients who were diagnosed with osteomyelitis of the jaw underwent treatment with vancomycin-impregnated calcium sulfate since July 2014 at the Department of Oral and Maxillofacial Surgery, School of Stomatology, China Medical University (Shenyang, China). All patients underwent debridement of nonviable bone and implantation of vancomycin-impregnated calcium sulfate. The wounds were covered with an acellular dermal matrix and sutured. Ten patients had satisfactory wound healing. However, 2 cases of maxillary central osteomyelitis had delayed wound healing. The wounds healed after the surgical site was resutured under local anesthesia. At 3 months, the panoramic radiograph showed that most implants had been reabsorbed and replaced by new bone formation. All patients in this study had no recurrence of infection at 6 to 18 months (mean, 10.8 months) of follow-up. The use of vancomycin-impregnated calcium sulfate in the surgical debridement site for chronic osteomyelitis of the jaw has shown encouraging results. In addition, calcium sulfate can promote the formation of new bone to a certain extent. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  10. Mechanical and electric characteristics of vacuum impregnated no-insulation HTS coil

    International Nuclear Information System (INIS)

    Park, Heecheol; Kim, A-rong; Kim, Seokho; Park, Minwon; Kim, Kwangmin; Park, Taejun

    2014-01-01

    Highlights: • A single pancake no-insulation coil was fabricated with a brass lamination conductor. • Charging/discharging test was performed using liquid nitrogen and conduction-cooling. • Consistent contact resistance was verified after epoxy impregnation. • Equivalent circuit was used to estimate the heat generation during charging operation. • The HTS coil did not showed delamination problem for the conduction cooling. - Abstract: For the conduction cooling application, epoxy impregnation is inevitable to enhance the thermal conduction. However, there have been several research results on the delamination problem with coated conductor and the main cause of the delamination is related with the different thermal contraction between epoxy, the insulation layer and the weak conductor. To avoid this problem, the amount of epoxy and insulation layer between conductors should be minimized or removed. Therefore, no insulation (NI) winding method and impregnation after dry winding can be considered to solve the problem. The NI coil winding method is very attractive due to high mechanical/thermal stability for the special purpose of DC magnets by removing the insulation layer. In this paper, the NI coil winding method and vacuum impregnation are applied to a HTS coil to avoid the delamination problem and enhance the mechanical/thermal stability for the conduction cooling application. Through the charging/discharging operation, electric/thermal characteristics are investigated at 77 K and 30 K

  11. Weed Control and Seedling Performance Using Oust, Velpar, and Velpar+Oust Impregnated Diammonium Phosphate

    Science.gov (United States)

    J.L. Yeiser

    2002-01-01

    Technology that combines herbicide and fertilizer into one treatment thereby reducing application costs while enhancing growth is needed. Four clean and well-prepared sites in TX, MS, and AL were tested. Study objectives were to evaluate the effectiveness of diammonium phosphate (DAP) impregnated with Oust, Velpar, or Velpar+Oust for herbaceous weed control and newly...

  12. Iron oxide impregnated filter paper (Pi test): a review of its development and methodological research

    NARCIS (Netherlands)

    Chardon, W.J.; Menon, R.G.; Chien, S.H.

    1996-01-01

    Iron oxide impregnated filter paper (FeO paper) has been used to study the availability of phosphorus (P) to plants and algae, P desorption kinetics and P dynamics in the field. Since its initial development a number of differences in the method of preparation of the paper and its application have

  13. Impregnated membranes for direct methanol fuel cells at high methanol concentrations

    NARCIS (Netherlands)

    Yildirim, M.H.; Schwarz, Alexander; Stamatialis, Dimitrios; Wessling, Matthias

    2009-01-01

    Sulfonated poly(phthalazinone ether ketone) (SPPEK) impregnated Solupor® microporous film (SPPEK–PE) and pure SPPEK membranes with two different ion-exchange capacities (IECs) were prepared and characterized for use in DMFC applications. Swelling, proton conductivity, diffusion and DMFC experiments

  14. Anti-biofilm and cytotoxicity activity of impregnated dressings with silver nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Velázquez-Velázquez, Jorge Luis [Laboratorio de Microbiología, Facultad de Ciencias Químicas, UASLP (Mexico); Santos-Flores, Andrés; Araujo-Meléndez, Javier [Servicio de Epidemiología del Hospital Central “Dr. Ignacio Morones Prieto”, San Luis Potosí (Mexico); Sánchez-Sánchez, Roberto; Velasquillo, Cristina [Laboratorio de Biotecnología, Instituto Nacional de Rehabilitación (Mexico); González, Carmen [Laboratorio de Fisiología Celular, Facultad de Ciencias Químicas, UASLP (Mexico); Martínez-Castañon, Gabriel [Maestría en Ciencias Odontológicas Facultad de Estomatología, UASLP (Mexico); Martinez-Gutierrez, Fidel, E-mail: fidel@uaslp.mx [Laboratorio de Microbiología, Facultad de Ciencias Químicas, UASLP (Mexico)

    2015-04-01

    Infections arising from bacterial adhesion and colonization on chronic wounds are a significant healthcare problem. Silver nanoparticles (AgNPs) impregnated in dressing have attracted a great deal of attention as a potential solution. The goal of the present study was to evaluate the anti-biofilm activities of AgNPs impregnated in commercial dressings against Pseudomonas aeruginosa, bacteria isolated of chronic wounds from a hospital patient. The antimicrobial activity of AgNPs was tested within biofilms generated under slow fluid shear conditions using a standard bioreactor. A 2-log reduction in the number of colony-forming units of P. aeruginosa was recorded in the reactor on exposure to dressing impregnated with 250 ppm of AgNPs, diameter 9.3 ± 1.1 nm, and also showed compatibility to mammalian cells (human fibroblasts). Our study suggests that the use of dressings with AgNPs may either prevent or reduce microbial growth in the wound environment, and reducing wound bioburden may improve wound-healing outcomes. - Highlights: • Biological activities of silver nanoparticles for wound-healing purposes • Characterization of the silver nanoparticles impregnated in dressings • Reduction in the P. aeruginosa biofilm formation was statistically significant. • Compatibility to human dermal fibroblasts as the main cell type involved in the reparation • AgNPs covering the surfaces would provide great potential for prevention and treatment.

  15. Efficacy of dental floss impregnated with chlorhexidine on reduction of supragingival biofilm: a randomized controlled trial.

    Science.gov (United States)

    Muniz, F W M G; Sena, K S; de Oliveira, C C; Veríssimo, D M; Carvalho, R S; Martins, R S

    2015-05-01

    The use of a toothbrush has a limited ability to control the dental biofilm in interproximal areas. Therefore, specialized devices, such as dental floss, may be useful for these specific areas. This study aimed to investigate the efficacy of dental floss impregnated with 5% chlorhexidine gluconate on the reduction of the supragingival biofilm. This research was parallel, single-blind, controlled and randomized, and contained a sample of thirty dental students from the Faculty of Pharmacy, Dentistry and Nursing of the Federal University of Ceará, Brazil, who were divided equally into three groups. The negative control group (NC) did not utilize any kind of interproximal cleaning; the positive control group (PC) used waxed floss without impregnation twice a day; and the test group (T) used the same dental floss, which was impregnated with 5% chlorhexidine gluconate, twice a day. For all groups, this study lasted for 15 days. The presence of a biofilm was evaluated on four surfaces (mesiobuccal, distobuccal, mesiolingual and distolingual) by the Quigley-Hein Index, resulting in four scores for each tooth. Group T had the lowest plaque scores, showing a significant difference compared to group NC (P dental floss impregnated with 5% chlorhexidine gluconate resulted in additional reductions in the supragingival biofilm relative to the results achieved with conventional waxed floss on the anterior teeth of a well-motivated and well-instructed population. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. PHYSICAL AND MECHANICAL PROPERTIES OF THREE POLYSTYRENE IMPREGNATED INDONESIAN WOOD SPECIES

    Directory of Open Access Journals (Sweden)

    Nurwati Hadjib

    2005-07-01

    Full Text Available The disadvantage of  fast-growing species is  that they have inferior physical and mechanical properties. Polystyrene impregnation can be applied to improve physical and mechanical properties. Wood samples, which were dried  until 10% moisture content were put into impregnating tank and vacuum pressured  at 20-mm Hg  for  two hours. During  the gradual release of  vacuum, styrene monomers,  vinyl acetate  monomers  and  terburyl-peroxide catalyst was streamed  into  the tank. Afterwards, the pressure inside the tank was allowed to decrease to 500 mm Hg and kept for 60 minutes. Wood samples which had been impregnated were subsequently immersed in water, then wrapped in aluminum foils and put in the oven for 24 hours at 60°C. The samples were then tested for the polymer loading and their physical and mechanical properties. The results showed that the polymer loadings in wood plastics with the species  of origin (i.e. consecutively sengon, pine and rubber wood were 118%, 72% and 44%, respectively. Impregnation with polystyrene  (copolymer of styrene and vinyl acetate monomers could improve the physical and mechanical properties of wood plastics, i.e.  specific gravity, moisture content, water absorption,  shrinkage/ swelling, compression parallelto the wood grain, MOR and MOE. Greater  use of vinyl acetate decreased physical and mechanical properties.

  17. In situ development of nanosilver-impregnated bacterial cellulose for sustainable released antimicrobial wound dressing.

    Science.gov (United States)

    Mohite, Bhavana V; Patil, Satish V

    2016-04-06

    Bacterial cellulose (BC) is an interesting biomaterial found application in various fields due to its novel characteristics like purity, water holding capacity, degree of polymerization and mechanical strength. BC as wound dressing material has limitation because it has no antimicrobial activity. To circumvent this problem, the present study was carried out by impregnation of silver on bacterial cellulose surface. Bacterial cellulose was produced by Gluconoacetobacter hansenii (strain NCIM 2529) by shaking culture method. The sodium borohydride and classical Tollens reaction was used for silver nanoparticle synthesis. The effectiveness of sodium borohydride method compared with Tollens reaction was evaluated on the basis of silver nanoparticle formation and its impregnation on BC as evidenced by UV-Vis spectrum analysis, FE-SEM-EDS analysis and FT-IR spectrum. The potential of nano silver impregnated BC was determined for sustained release antimicrobial wound dressing material by swelling ratio, mechanical properties and antimicrobial activity against Staphylococcus aureus. Thus the nanosilver impregnated bacterial cellulose as promising antimicrobial wound dressing material was evidenced.

  18. Anti-biofilm and cytotoxicity activity of impregnated dressings with silver nanoparticles

    International Nuclear Information System (INIS)

    Velázquez-Velázquez, Jorge Luis; Santos-Flores, Andrés; Araujo-Meléndez, Javier; Sánchez-Sánchez, Roberto; Velasquillo, Cristina; González, Carmen; Martínez-Castañon, Gabriel; Martinez-Gutierrez, Fidel

    2015-01-01

    Infections arising from bacterial adhesion and colonization on chronic wounds are a significant healthcare problem. Silver nanoparticles (AgNPs) impregnated in dressing have attracted a great deal of attention as a potential solution. The goal of the present study was to evaluate the anti-biofilm activities of AgNPs impregnated in commercial dressings against Pseudomonas aeruginosa, bacteria isolated of chronic wounds from a hospital patient. The antimicrobial activity of AgNPs was tested within biofilms generated under slow fluid shear conditions using a standard bioreactor. A 2-log reduction in the number of colony-forming units of P. aeruginosa was recorded in the reactor on exposure to dressing impregnated with 250 ppm of AgNPs, diameter 9.3 ± 1.1 nm, and also showed compatibility to mammalian cells (human fibroblasts). Our study suggests that the use of dressings with AgNPs may either prevent or reduce microbial growth in the wound environment, and reducing wound bioburden may improve wound-healing outcomes. - Highlights: • Biological activities of silver nanoparticles for wound-healing purposes • Characterization of the silver nanoparticles impregnated in dressings • Reduction in the P. aeruginosa biofilm formation was statistically significant. • Compatibility to human dermal fibroblasts as the main cell type involved in the reparation • AgNPs covering the surfaces would provide great potential for prevention and treatment

  19. Phosphate adsorption on aluminum-impregnated mesoporous silicates : surface structure and behavior of adsorbents

    Science.gov (United States)

    Eun Woo Shin; James S. Han; Min Jang; Soo-Hong Min; Jae Kwang Park; Roger M. Rowell

    2004-01-01

    Phosphorus from excess fertilizers and detergents ends up washing into lakes, creeks, and rivers. This overabundance of phosphorus causes excessive aquatic plant and algae growth and depletes the dissolved oxygen supply in the water. In this study, aluminum-impregnated mesoporous adsorbents were tested for their ability to remove phosphate from water. The surface...

  20. Can antibiotic impregnated cement nail achieve both infection control and bony union in infected diaphyseal femoral non-unions?

    Science.gov (United States)

    Pradhan, Chetan; Patil, Atul; Puram, Chetan; Attarde, Dheeraj; Sancheti, Parag; Shyam, Ashok

    2017-08-01

    Infected non-union is complex and debilitating disorder affecting orthopaedic surgeon and patient in terms of cost and time. Many methods are described in the literature for treatment of infected non-union. Local high concentration of antibiotic and mechanical stability of antibiotic cement impregnated intramedullary nail (ACIIN) proves cost and time effective. Recently it was suggested that ACIIN can achieve both union and infection control in infected non-unions with bone gap less than 4cm. The aim of our study was to investigate this hypothesis and study the outcome of antibiotic cement impregnated intramedullary nail in term of both infection control and osseous union. We retrospectively studied 21 patients with infected diaphyseal femoral non-union. Inclusion criteria were bone gap less than 4cm after debridement and more than 1 year follow-up of the case. ACIIN prepared using K nail was used as primary procedure after adequate debridement. Infection control and osseous union was judged on the basis of clinical, radiological and haematological parameters. All patients were followed up with an average follow-up of 20.23±3.65 months (range 14-28 months). Infection control was achieved in all 21 patients at end of 12 months follow-up, out of which 16 patients had osseous union and infection control without any secondary procedure. Of the remaining 5 patients: two patients had good infection control but had broken ACCIN due to non-compliance to weight bearing protocol. One patient underwent exchange nailing and plate augmentation whilst the other underwent simple exchange nailing, One more patient who had infection control but had persistent non-union had to undergo exchange nailing and augmented plating to achieve union. One other patient required debridement and implant removal and attained union and fifth patient required two additional debridements to control infection after which the fracture united. Apart from above 5 cases there were two further

  1. Modeling boron separation from water by activated carbon, impregnated and unimpregnated

    Energy Technology Data Exchange (ETDEWEB)

    Ristic, M.; Grbavcic, Z. [Belgrade Univ., Belgrade (BA). Faculty of Technology and Metallurgy; Marinovic, V. [Belgrade Univ., Belgrade (BA). Ist. of Technical Science of the Serbian Academy of Science and Arts

    2000-10-01

    The sorption of boron from boric acid water solution by impregnated activated carbon has been studied. Barium, calcium, mannitol, tartaric acid and citric acid were used as chemical active materials. All processes were performed in a chromatographic continuous system at 22{sup 0} C. Experimental results show that activated carbon impregnated with mannitol is effective in removing boron from water. The separation of boron from the wastewater from a factory for producing enameled dishes by activated carbon impregnated with mannitol was also performed. Two models have been applied to describe published and new data on boron sorption by impregnated activated carbon. Both of them are based on the analysis of boron concentration response to the step input function. This led to a mathematical model that quite successfully described impregnation effects on adsorption capacities. [Italian] E' stato studiato l'assorbimento del boro, mediante carbone attivo impregnato, da soluzioni acquose di acido borico. Quali materiali chimici attivi sono stati utilizzati: bario, calcio, mannitolo, acido tartarico ed acido citrico. Tutti i processi sono stati condotti in un sistema cromatografico continuo a 22{sup 0}C. I risultati sperimentali mostrano che il carbone attivo impregnato con mannitolo e' efficace nella rimozione del boro dall'acqua. E' anche stata effettuata la separazione del boro da acque di scarico di un'industria per la produzione di piatti smaltati mediante carbone attivo impregnato con mannitolo. Sono stati applicati due modelli per descrivere i risultati, pubblicati e nuovi, dell'assorbimento del boro mediante carbone attivo impregnato. Entrambi sono basati sull'analisi della risposta alla concentrazione di boro successivamente incrementata a stadi. Cio' porta ad un modello matematico che descrive abbastanza soddisfacentemente gli effetti dell'impregnazione sulla capacita' di assorbimento.

  2. CHLORHEXIDINE-IMPREGNATED DRESSING FOR PREVENTION OF CATHETER-RELATED BLOODSTREAM INFECTION: A META-ANALYSIS

    Science.gov (United States)

    Safdar, Nasia; O’Horo, John C.; Ghufran, Aiman; Bearden, Allison; Didier, Maria Eugenia; Chateau, Dan; Maki, Dennis G.

    2014-01-01

    Background Catheter related bloodstream infections (CRBSI) are associated with significant morbidity and mortality and effective methods for their prevention are needed. Objective To assess the efficacy of a chlorhexidine-impregnated dressing for prevention of central venous catheter-related colonization and CRBSI using meta-analysis. Data Sources Multiple computerized database searches supplemented by manual searches including relevant conference proceedings. Study Selection Randomized controlled trials (RCT) evaluating the efficacy of a chlorhexidine-impregnated dressing compared with conventional dressings for prevention of catheter colonization and CRBSI. Data Extraction Data were extracted on patient and catheter characteristics and outcomes. Data Synthesis Pooled estimates of the relative risk (RR) and 95% confidence intervals (CI) were obtained using the DerSimonian and Laird random effects model and the Mantel-Haenszel fixed effects model. Heterogeneity was assessed using the Cochran Q statistic and I2. Subgroup analyses were used to explore heterogeneity. Results Nine RCTs met the inclusion criteria. Use of a chlorhexidine-impregnated dressing resulted in a reduced incidence of CRBSI (random effects RR 0.57, 95% CI 0.42–0.79, P=0.002). The incidence of catheter colonization was also markedly reduced in the chlorhexidine-impregnated dressing group (random effects RR 0.51, 95% CI 0.39–0.67, Pchlorhexidine-impregnated dressing is beneficial in preventing catheter colonization and, more importantly, CRBSI and warrants routine use in patients at high risk of CRBSI and CVC or arterial catheter colonization in ICUs. PMID:24674924

  3. Clinical evaluation of a silver impregnated foam dressing in paediatric partial-thickness burns.

    Science.gov (United States)

    Glat, P M; Zhang, S H; Burkey, B A; Davis, W J

    2015-04-01

    MepilexAg, a silver-impregnated foam dressing, was introduced to our institution in 2007 and our outcomes in the treatment of paediatric burns were observed to improve significantly. In order to confirm these observations, we wanted to evaluate the results of using the silver-impregnated foam dressing in partial-thickness paediatric burns.Method: In this retrospective, study, the St. Christopher's Hospital burn registry was used to identify subjects, who were otherwise in excellent health at baseline, over an 18-month period,. Outcomes included length of stay, intravenous narcotic use, and time to healing. No direct comparative studies were performed. This was followed by a non-comparative prospective study involving 22 paediatric patients, aged 1-4 years, with partial-thickness burns. This was a sub-study of a larger randomized controlled trial involving adults with partial-thickness burns, comparing the silver-impregnated foam dressing with Silvadene. In the retrospective part of the study, the silver-impregnated foam dressing was used successfully for the treatment of partial-thickness paediatric burns, with few complications and infections, allowing a shorter hospital stay, fewer dressings, and less pain medication than for historical controls. In the non-comparative prospective study, of 22 paediatric patients 50% healed completely within I week of treatment. The mean length of stay was 3.77 days and the mean number of dressings used was 1.64.Aithough narcotic usage was not assessed, patient surveys showed stinging or burning to be recorded as 'never' in 13 patients, 'rarely' in 8 patients, and 'sometimes' in I patient. The silver-impregnated foam dressing is effective and safe for use in partial-thickness paediatric burns, eliminating the need for daily dressings.

  4. Efficacy of 1.23% APF gel applications on incipient carious lesions: a double-blind randomized clinical trial

    Directory of Open Access Journals (Sweden)

    Maria Laura Menezes Bonow

    2013-06-01

    Full Text Available The aim of this double-blind randomized clinical trial was to evaluate the efficacy of 1.23% APF gel application on the arrest of active incipient carious lesions in children. Sixty 7- to 12-year-old children, with active incipient lesions were included in the study. Children were divided randomly into 2 groups: 1.23% APF gel and placebo gel applications. Each group received 8 weekly applications of treatment. The lesions were re-evaluated at the 4th and 8th appointments. Poisson regression analysis was used to estimate relative risks of the presence of active white spot lesions. Groups showed similar results (PR = 1.67; CI 95% 0.69–3.98. The persistence of at least 1 active lesion was associated with a higher number of lesions in the baseline (PR = 2.67; CI 95% 1.19–6.03, but not with sugar intake (PR = 1.06; CI 95% 0.56–2.86 and previous exposure to fluoride dentifrice (PR = 1.26; CI 95% 0.49–2.29. The trial demonstrates the equivalence of the treatments. The use of the APF gel showed no additional benefits in this sample of children exposed to fluoridated water and dentifrice. The professional dental plaque removal in both groups may also account for the resulting equivalence of the treatments.

  5. Limited oxygen index levels of impregnated Scots pine wood

    International Nuclear Information System (INIS)

    Tomak, Eylem Dizman; Cavdar, Ayfer Donmez

    2013-01-01

    Highlights: • Scots pine samples were treated with 4 wood preservatives with various concentrations. • Limited oxygen index level was evaluated both for leached and un-leached samples. • All treatments improved fire retardance of samples despite some chemicals leached out. • Samples treated with fireproof agent showed the best results. • LOI of samples treated with boron powder and silicon oil was not changed by leaching. - Abstract: In this study, effect of various concentrations of boron powder, mixture of boric acid and borax, fireproof agent based on liquid blend of limestone, and silicon oil on limited oxygen index levels (LOI) of S. pine wood was investigated. Wood samples were first vacuum treated with the preservatives, and then were subjected to leaching procedure. Samples treated with fireproof agent showed the best results for improving the fire retardancy of wood, furthermore, samples treated with 25%, 50% and 100% of the solution did not burn. Leaching did not considerably change the LOI of wood samples treated with boron powder and silicon oil; however, LOI levels of samples treated with the mixture of boric acid and borax and fireproof agent were affected by leaching procedure probably arising those preservatives did not chemically bond to main wood components. All treatments improved fire retardancy of samples despite some amount of preservatives leached out from wood

  6. Limited oxygen index levels of impregnated Scots pine wood

    Energy Technology Data Exchange (ETDEWEB)

    Tomak, Eylem Dizman, E-mail: eylemdizman@yahoo.com [Forest Industry Engineering Department, Faculty of Forestry, Bursa Technical University, 16200 Bursa (Turkey); Cavdar, Ayfer Donmez [Interior Architecture Department, Faculty of Architecture, Karadeniz Technical University, 61080 Trabzon (Turkey)

    2013-12-10

    Highlights: • Scots pine samples were treated with 4 wood preservatives with various concentrations. • Limited oxygen index level was evaluated both for leached and un-leached samples. • All treatments improved fire retardance of samples despite some chemicals leached out. • Samples treated with fireproof agent showed the best results. • LOI of samples treated with boron powder and silicon oil was not changed by leaching. - Abstract: In this study, effect of various concentrations of boron powder, mixture of boric acid and borax, fireproof agent based on liquid blend of limestone, and silicon oil on limited oxygen index levels (LOI) of S. pine wood was investigated. Wood samples were first vacuum treated with the preservatives, and then were subjected to leaching procedure. Samples treated with fireproof agent showed the best results for improving the fire retardancy of wood, furthermore, samples treated with 25%, 50% and 100% of the solution did not burn. Leaching did not considerably change the LOI of wood samples treated with boron powder and silicon oil; however, LOI levels of samples treated with the mixture of boric acid and borax and fireproof agent were affected by leaching procedure probably arising those preservatives did not chemically bond to main wood components. All treatments improved fire retardancy of samples despite some amount of preservatives leached out from wood.

  7. The effect of silanated and impregnated fiber on the tensile strength of E-glass fiber reinforced composite retainer

    Directory of Open Access Journals (Sweden)

    Niswati Fathmah Rosyida

    2015-12-01

    Full Text Available Background: Fiber reinforced composite (FRC is can be used in dentistry as an orthodontic retainer. FRC  still has a limitations because of to  a weak bonding between fibers and matrix. Purpose: This research was aimed to evaluate the effect of silane as coupling agent and fiber impregnation on the tensile strength of E-glass FRC. Methods: The samples of this research were classified into two groups each of which consisted of three subgroups, namely the impregnated fiber group (original, 1x addition of silane, 2x addition of silane and the non-impregnated fiber group (original, 1x addition of silane, 2x addition of silane. The tensile strength was measured by a universal testing machine. The averages of the tensile strength in all groups then were compared by using Kruskal Wallis and Mann Whitney post hoc tests. Results: The averages of the tensile strength (MPa in the impregnated fiber group can be known as follow; original impregnated fiber (26.60±0.51, 1x addition of silane (43.38±4.42, and 2x addition of silane (36.22±7.23. The averages of tensile strength (MPa in the non-impregnated fiber group can also be known as follow; original non-impregnated fiber (29.38±1.08, 1x addition of silane (29.38±1.08, 2x addition of silane (12.48±2.37. Kruskal Wallis test showed that there was a significant difference between the impregnated fiber group and the non-impregnated fiber group (p<0.05. Based on the results of post hoc test, it is also known that the addition of silane in the impregnated fiber group had a significant effect on the increasing of the tensile strength of E-glass FRC (p<0.05, while the addition of silane in the non-impregnated fiber group had a significant effect on the decreasing of the tensile strength of E-glass FRC. Conclusion: It can be concluded that the addition of silane in the non-silanated fiber group can increase the tensile strength of E-glass FRC, but the addition of silane in the silanated fiber group can

  8. Risk assessment of Bundeswehr (German Federal Armed Forces) permethrin-impregnated battle dress uniforms (BDU).

    Science.gov (United States)

    Appel, Klaus E; Gundert-Remy, Ursula; Fischer, Horst; Faulde, Michael; Mross, Klaus G; Letzel, Stephan; Rossbach, Bernd

    2008-03-01

    In an age when vector-borne diseases are emerging worldwide, personal protective measures are essential for shielding soldiers and other exposed persons from arthropod attack. The development of permethrin-impregnated clothing has been one recent advance in protecting persons at-risk. However, to date risk assessment has not been performed related to wearing permethrin-impregnated clothing over longer time periods. Therefore, this paper describes relevant toxicological aspects of permethrin and estimates the extent of dermal permethrin uptake by soldiers wearing impregnated uniforms by determining urine metabolites of permethrin. The exposure monitoring conducted in wearers of untreated uniforms did not show any signs of increased permethrin uptake and was similar to that of the general population in Germany. By contrast, studies involving the soldiers wearing permethrin-impregnated uniforms identified far higher internal exposure, the amounts of urine metabolites clearly above the reference value for the background exposure of the German population at large. Comparing the median excretion values, an approximately 200 times higher exposure can be assumed. The excretion levels of the subject with the maximum amount of metabolites correspond to an internal exposure of around 5-6microg/kg body weight and day thereby considering that biomonitoring could not take all urine metabolites and other elimination routes into account. Based on an oral absorption rate of 50%, the internal dose of 5-6microg/kg body weight and day would correspond to an oral uptake of permethrin which is around 20% of the ADI value of 50microg/kg body weight and day. In addition, based on these data and using a dermal absorption rate of 2% the permethrin dose reaching the skin was estimated to be 250microg/kg body weight and day. Considering a standard body weight and the area covered by the uniform, an exposure level of about 1.25microg permethrin/cm(2) skin and day can be calculated. Clinical

  9. The use of antibiotic-impregnated cement beads in the management of sternal osteomyelitis after treatment for malignant lymphoma

    International Nuclear Information System (INIS)

    Nakabayashi, Yohei; Kikuchi, Noriaki; Ogino, Toshihiko; Kim, Cholsu; Miyazaki, Ryouta; Sadahiro, Mitsuaki

    2010-01-01

    Currently, the majority of patients who develop Hodgkin's disease can be cured with radiotherapy and/or chemotherapy. A long follow up of cured patients has shown that the cumulative toxicity from treatment related complication rivals the mortality from Hodgkin's disease. We present a 38-year old male with Hodgkin's disease, treated with radiation and chemotherapy, who developed cardiac infarction and severe mediastinal fibrosis. After median sternotomy for cardiac bypass operation, he suffered from sternal osteitis and superior mediastinitis. A radical debridement must be avoided to protect the bypassed conduit embedded in the extended severe mediastinal fibrosis. Then after appropriate debridement and management of methicillin-resistant Staphylococcus aureus (MRSA) infection, latissimus dorsi myocutaneous flap transfer and use of vancomycin-impregnated cement beads achieved infection control. In this study we present our experience with bibliographical discussion. With the concept presented in this study, however, a consistent cure and prevention from subsequent infection-related morbidity and mortality were achieved even in the subset of the most severe, recalcitrant cases of sternal osteitis, and with an unacceptable rate of complications. This justifies the invasive nature of the procedure and suggests its application not only as a salvage operation for failures after previous interventions, but also as a primary approach for severe sternal osteomyelitis. (author)

  10. Solid phase extraction of metal ions in environmental samples on 1-(2-pyridylazo)-2-naphthol impregnated activated carbon cloth.

    Science.gov (United States)

    Alothman, Zeid A; Yilmaz, Erkan; Habila, Mohamed; Soylak, Mustafa

    2015-02-01

    1-(2-Pyridylazo)-2-naphthol impregnated activated carbon cloth (PAN-imp-ACC) was prepared as a solid phase sorbent and, for the first time, was used for the simultaneous separation and preconcentration of trace amounts of lead, cadmium and nickel in water, soil and sewage sludge samples prior to determination by flame atomic absorption spectrometry (FAAS). The parameters governing the efficiency of the method were optimized, including the pH, the eluent type and volume, the sample and eluent flow rates, diverse ions effects and the sample volume. A preconcentration factor of 100 was achieved for all the metal ions, with detection limits of 0.1-2.8 µg L(-1) and relative standard deviations below 6.3%. The adsorption capacity of the PAN-imp-ACC for Pb(II), Cd(II) and Ni(II) ions was found to be 45.0 mg g(-1), 45.0 mg g(-1) and 43.2 mg g(-1), respectively. The method was validated by the analysis of the certified reference materials TMDA-64.2 fortified Lake Ontario water and BCR-146R Sewage Sludge Amended Soil (Industrial Origin). The procedure was applied to determine the analytes content in real samples. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. The Lund University Checklist for Incipient Exhaustion: a prospective validation of the onset of sustained stress and exhaustion warnings

    Directory of Open Access Journals (Sweden)

    Kai Österberg

    2016-09-01

    Full Text Available Abstract Background The need for instruments that can assist in detecting the prodromal stages of stress-related exhaustion has been acknowledged. The aim of the present study was to evaluate whether the Lund University Checklist for Incipient Exhaustion (LUCIE could accurately and prospectively detect the onset of incipient exhaustion and to what extent work stressor exposure and private burdens were associated with increasing LUCIE scores. Methods Using surveys, 1355 employees were followed for 11 quarters. Participants with prospectively elevated LUCIE scores were targeted by three algorithms entailing 4 quarters: (1 abrupt onset to a sustained Stress Warning (n = 18, (2 gradual onset to a sustained Stress Warning (n = 42, and (3 sustained Exhaustion Warning (n = 36. The targeted participants’ survey reports on changes in work situation and private life during the fulfillment of any algorithm criteria were analyzed, together with the interview data. Participants untargeted by the algorithms constituted a control group (n = 745. Results Eighty-seven percent of participants fulfilling any LUCIE algorithm criteria (LUCIE indication cases rated a negative change in their work situation during the 4 quarters, compared to 48 % of controls. Ratings of negative changes in private life were also more common in the LUCIE indication groups than among controls (58 % vs. 29 %, but free-text commentaries revealed that almost half of the ratings in the LUCIE indication groups were due to work-to-family conflicts and health problems caused by excessive workload, assigned more properly to work-related negative changes. When excluding the themes related to work-stress-related private life compromises, negative private life changes in the LUCIE indication groups dropped from 58 to 32 %, while only a negligible drop from 29 to 26 % was observed among controls. In retrospective interviews, 79 % of the LUCIE indication participants

  12. The Lund University Checklist for Incipient Exhaustion: a prospective validation of the onset of sustained stress and exhaustion warnings.

    Science.gov (United States)

    Österberg, Kai; Persson, Roger; Viborg, Njördur; Jönsson, Peter; Tenenbaum, Artur

    2016-09-29

    The need for instruments that can assist in detecting the prodromal stages of stress-related exhaustion has been acknowledged. The aim of the present study was to evaluate whether the Lund University Checklist for Incipient Exhaustion (LUCIE) could accurately and prospectively detect the onset of incipient exhaustion and to what extent work stressor exposure and private burdens were associated with increasing LUCIE scores. Using surveys, 1355 employees were followed for 11 quarters. Participants with prospectively elevated LUCIE scores were targeted by three algorithms entailing 4 quarters: (1) abrupt onset to a sustained Stress Warning (n = 18), (2) gradual onset to a sustained Stress Warning (n = 42), and (3) sustained Exhaustion Warning (n = 36). The targeted participants' survey reports on changes in work situation and private life during the fulfillment of any algorithm criteria were analyzed, together with the interview data. Participants untargeted by the algorithms constituted a control group (n = 745). Eighty-seven percent of participants fulfilling any LUCIE algorithm criteria (LUCIE indication cases) rated a negative change in their work situation during the 4 quarters, compared to 48 % of controls. Ratings of negative changes in private life were also more common in the LUCIE indication groups than among controls (58 % vs. 29 %), but free-text commentaries revealed that almost half of the ratings in the LUCIE indication groups were due to work-to-family conflicts and health problems caused by excessive workload, assigned more properly to work-related negative changes. When excluding the themes related to work-stress-related private life compromises, negative private life changes in the LUCIE indication groups dropped from 58 to 32 %, while only a negligible drop from 29 to 26 % was observed among controls. In retrospective interviews, 79 % of the LUCIE indication participants confirmed exclusively/predominantly work stressors

  13. Silver-impregnated vacuum-assisted closure in the treatment of recalcitrant venous stasis ulcers.

    Science.gov (United States)

    Gerry, Ryan; Kwei, Stephanie; Bayer, Lauren; Breuing, Karl H

    2007-07-01

    Vacuum-assisted closure (VAC) has made a significant contribution to the treatment of acute and chronic wounds. Microdeformational forces from the VAC device accelerate granulation tissue formation when compared with moist saline dressing changes. We present 2 patients with multiple comorbid conditions and complex venous stasis ulcers that had persistent purulent drainage after conventional treatment modalities. Only after utilizing silver-impregnated VAC therapy (GranuFoam Silver), combining the antimicrobial benefits of silver with the advantages of VAC technology, were the wound beds adequately prepared for substantial split-thickness skin grafts. Based on these cases, the silver-impregnated VAC device may be a useful adjunct in wound bed preparation when standard therapies have failed to clear infected wounds. This may lead to improved healing rates and overall decreased wound burden in these complex patients.

  14. Strengthening of limestone by the impregnation - gamma irradiation method. Results of tests

    International Nuclear Information System (INIS)

    Ramiere, R.; Tassigny, C. de

    1975-04-01

    The method developed by the Centre d'Etudes Nucleaires de Grenoble (France) strengthens the stones by impregnation with a styrene resin/liquid polystyrene mixture followed by polymerization under gamma irradiation. This method is applicable to stones which can be taken into the laboratory for treatment. The increase in strength of 6 different species of French limestone has been quantitatively recorded. The following parameters were studied: possibility of water migration inside the stones, improvements of the mechanical properties of the impregnated stone, standing up to freeze-thaw conditions and artificial ageing of the stones which causes only minor changes in the appearance of the stone and a negligible decrease in weight [fr

  15. Separation of yttrium using carbon nanotube doped polymeric beads impregnated with D2EHPA

    International Nuclear Information System (INIS)

    Dasgupta, Kinshuk; Yadav, Kartikey K.; Singh, D.K.; Anitha, M.; Singh, H.

    2013-01-01

    Di-2-ethylhexyl phosphoric acid impregnated polyethersulfone based composite beads in combination with additives such as polyvinyl alcohol (PVA) and multiwalled carbon nanotube (MWCNT) has been prepared by non-solvent phase inversion method. The synthesized beads were characterized by scanning electron microscopy, thermogravimetry and infra-red spectroscopy. Effect of additives on bead morphology, solvent impregnation capacity, extractability and stability has been examined to compare their suitability for yttrium recovery from acidic medium. Microstructural investigation as well as experimental findings confirmed the role of additives in modifying the pore structures in beads, responsible for varied degree of yttrium extraction. Further the role of metal ion concentration in aqueous phase on its recovery by polymeric beads was also evaluated. Among the tested beads PES/D2EHPA/MWCNT/PVA beads were found to be superior for Y(Ill) extraction. (author)

  16. Development of activated charcoal impregnated air sampling filter media : their characteristics and use

    International Nuclear Information System (INIS)

    Khan, A.A.; Ramarathinam, K.; Gupta, S.K.; Deshingkar, D.S.; Kishore, A.G.

    1975-01-01

    Because of its low maximum permissible concentration in air, air-borne radioiodine must be accurately monitored in contaminated air streams, in the working environment and handling facilities, before release to the environment from the nuclear facilities. Activated charcoal impregnated air sampling filter media are found to be most suitable for monitoring airborne iodine-131. Because of its simplicity and reproducible nature in assessment of air-borne radioactive iodine, the work on the development of such media was undertaken in order to find a suitable substitute for imported activated charcoal impregnated air sampling filter media. Eight different media of such type were developed, evaluated and compared with two imported media. Best suitable medium is recommended for its use in air-borne iodine sampling which was found to be even better suited than imported media of such type. (author)

  17. Treatment of infectious arthritis of the radiocarpal joint of cattle with gentamicin-impregnated collagen sponges

    International Nuclear Information System (INIS)

    Hirsbrunner, G.; Steiner, A.

    1998-01-01

    Gentamicin-impregnated collagen sponges were used successfully in the treatment of chronic septic arthritis of the radiocarpal joint in two cattle. Both animals were moderately to severely lame and refractory to systemic antibiotics, and one of them was refractory to joint lavage and local antibiotics. The clinical diagnosis was confirmed by radiography and arthrocentesis. Arthroscopy was performed under general anaesthesia and, after debridement and lavage of the joint, gentamicin-impregnated collagen sponges were placed intra-articularly. Synovial fluid was sampled at 10 and 20 days after surgery and radiographs were taken three months (case 1) and two months (case 2) after surgery. The infection was eliminated from both animals and they recovered without residual lameness

  18. Boron removal from aqueous solutions by activated carbon impregnated with salicylic acid

    International Nuclear Information System (INIS)

    Celik, Z. Ceylan; Can, B.Z.; Kocakerim, M. Muhtar

    2008-01-01

    In this study, the removal of boric acid from aqueous solution by activated carbon impregnated with salicylic acid was studied in batch system. pH, adsorbent amount, initial boron concentration, temperature, shaking rate and salicylic acid film thickness were chosen as parameters. Boron removal efficiencies increased with increasing adsorbent amount, temperature and pH, decreasing initial boron concentration. As thickness of salicylic acid film on activated carbon becomes thin up to 0.088 nm, the efficiency increased, and then, the efficiency decreased with becoming thinner than 0.088 nm of salicylic acid film. Shaking rate was no effect on removal efficiency. In result, it was determined that the use of salicylic acid as an impregnant for activated carbon led to the increase of the amount of boron adsorbed. A lactone ring, being the most appropriate conformation, forms between boric acid and -COOH and -OH groups of salicylic acid

  19. Property-porosity relationships for polymer-impregnated superconducting ceramic composite

    International Nuclear Information System (INIS)

    Salib, S.; Vipulanandan, C.

    1990-01-01

    A thermoplastic polymer, poly(methyl methacrylate) (PMMA), was used to improve the flexural properties of the high-temperature superconducting ceramic (YBa 2 Cu 3 O 7-δ ). Ceramic specimens with different porosities were prepared by dry compacting 12.5-mm-diameter disk specimens at various uniaxial pressures. Density-pressure relationships have been developed for before- and after-sintering conditions. The PMMA polymer was impregnated into the porous ceramic at room temperature. The mechanical properties were evaluated by concentrically loading simply supported disk specimens. The load-displacement responses were analyzed using the finite-element method. Impregnation of PMMA polymer at room temperature increased the flexural strength and modulus of the superconducting ceramic without affecting its electrical properties. The flexural properties depended on the porosity of the ceramics, and, hence, linear and nonlinear property-porosity relationships have been used to characterize the behavior of superconducting ceramic with an without the polymer

  20. Lubricant-impregnated surfaces for electrochemical applications, and devices and systems using same

    Energy Technology Data Exchange (ETDEWEB)

    Solomon, Brian Richmond; Chen, Xinwei; Chiang, Yet-Ming; Varanasi, Kripa K.

    2018-04-17

    In certain embodiments, the invention relates to an electrochemical device having a liquid lubricant impregnated surface. At least a portion of the interior surface of the electrochemical device includes a portion that includes a plurality of solid features disposed therein. The plurality of solid features define a plurality of regions therebetween. A lubricant is disposed in the plurality of regions which retain the liquid lubricant in the plurality of regions during operation of the device. An electroactive phase comes in contact with at least the portion of the interior surface. The liquid lubricant impregnated surface introduces a slip at the surface when the electroactive phase flows along the surface. The electroactive phase may be a yield stress fluid.

  1. Feasibility and Manufacturing Considerations of Hemp Textile Fabric Utilized in Pre-Impregnated Composites

    Science.gov (United States)

    Osusky, Gregory

    This study investigates the fabrication and mechanical properties of semicontinuous, hemp fiber reinforced thermoset composites. This research determines if off-the-shelf refined woven hemp fabric is suitable as composite reinforcement using resin pre-impregnated method. Industrial hemp was chosen for its low cost, low resource input as a crop, supply chain from raw product to refined textile and biodegradability potential. Detail is placed on specimen fabrication considerations. Lab testing of tension and compression is conducted and optimization considerations are examined. The resulting composite is limited in mechanical properties as tested. This research shows it is possible to use woven hemp reinforcement in pre-impregnated processed composites, but optimization in mechanical properties is required to make the process commercially practical outside niche markets.

  2. Low-density resin impregnated ceramic article and method for making the same

    Science.gov (United States)

    Tran, Huy K. (Inventor); Henline, William D. (Inventor); Hsu, Ming-ta S. (Inventor); Rasky, Daniel J. (Inventor); Riccitiello, Salvatore R. (Inventor)

    1997-01-01

    A low-density resin impregnated ceramic article advantageously employed as a structural ceramic ablator comprising a matrix of ceramic fibers. The fibers of the ceramic matrix are coated with an organic resin film. The organic resin can be a thermoplastic resin or a cured thermosetting resin. In one embodiment, the resin is uniformly distributed within the ceramic article. In a second embodiment, the resin is distributed so as to provide a density gradient along at least one direction of the ceramic article. The resin impregnated ceramic article is prepared by providing a matrix of ceramic fibers; immersing the matrix of ceramic fibers in a solution of a solvent and an organic resin infiltrant; and removing the solvent to form a resin film on the ceramic fibers.

  3. Incipient crystallization of transition-metal tungstates under microwaves probed by Raman scattering and transmission electron microscopy

    International Nuclear Information System (INIS)

    Siqueira, Kisla P. F.; Dias, Anderson

    2011-01-01

    Microwave synthesis was used to produce nanosized transition-metal tungstates in environmentally friendly conditions not yet reported by the literature: 110 and 150 °C, for times of 10 and 20 min. X-ray diffraction evidenced incipient crystallized materials, while transmission electron microscopy indicates nanostructured regions of about 2–5 nm inside an amorphous matrix. Raman spectroscopy was used to probe short-range ordering in the achieved samples and also to obtain a reliable set of spectra containing all the Raman-active bands predicted by group-theory calculations. The vibrational spectra showed no extra feature, indicating that the microwave processing was able to produce short-range ordered materials without tetrahedral distortions. These distortions are frequently reported when commercially modified kitchen microwave units are employed. In this work, the syntheses were conducted in a commercial apparatus especially designed for fully controlled temperature–time–pressure conditions.

  4. Incipient colonisation of Lutzomyia longipalpis in the city of Resistencia, province of Chaco, Argentina (2010-2012).

    Science.gov (United States)

    Szelag, Enrique Alejandro; Parras, Matías Ariel; Fabiani, Mariela; Rosa, Juan Ramón; Salomón, Oscar Daniel

    2014-07-01

    Lutzomyia longipalpis was recorded for the first time in Argentina in 2004, in the province of Formosa. In the following years, the vector spread to the south and west in the country and was recorded in the province of Chaco in 2010. From November 2010-May 2012, captures of Phlebotominae were made in the city of Resistencia and its surroundings, to monitor the spread and possible colonisation of Lu. longipalpis in the province of Chaco. In this monitoring, Lu. longipalpis was absent in urban sampling sites and its presence was restricted to Barrio de los Pescadores. This suggests that the incipient colonisation observed in 2010 was not followed by continuous installation of vector populations and expansion of their spatial distribution as in other urban centres of Argentina.

  5. Advances in understanding of osmotic dehydration and vacuum impregnation of fruits

    OpenAIRE

    Tylewicz, Urszula

    2011-01-01

    Osmotic Dehydration and Vacuum Impregnation are interesting operations in the food industry with applications in minimal fruit processing and/or freezing, allowing to develop new products with specific innovative characteristics. Osmotic dehydration is widely used for the partial removal of water from cellular tissue by immersion in hypertonic (osmotic) solution. The driving force for the diffusion of water from the tissue is provided by the differences in water chemical potential between ...

  6. Process for impregnating a concrete or cement body with a polymeric material

    Science.gov (United States)

    Mattus, Alfred J.; Spence, Roger D.

    1989-01-01

    A process for impregnating cementitious solids with polymeric materials by blending polymeric materials in a grout, allowing the grout to cure, and contacting the resulting solidified grout containing the polymeric materials with an organic mixture containing a monomer, a cross-linking agent and a catalyst. The mixture dissolves the polymerized particles and forms a channel for distributing the monomer throughout the network formed by the polymeric particles. The organic components are then cured to form a substantially water-impermeable mass.

  7. Fast, versatile x-ray fluorescence method for measuring tin in impregnated wood

    DEFF Research Database (Denmark)

    Drabæk, I.; Christensen, Leif Højslet

    1985-01-01

    The present paper describes an energy-dispersive x-ray fluorescence method for measuring tin in bis(tri-n-butyl)tin-oxide impregnated wood. The proposed method is of the backscatter/fundamental parameter type. Its versatility, precision, and accuracy is demonstrated by analyses of eleven samples...... of sapwood of Baltic Redwood. The results obtained are compared with those from neutron activation analysis....

  8. Preparation and characterization of manganese dioxide impregnated resin for radionuclide pre-concentration

    Energy Technology Data Exchange (ETDEWEB)

    Varga, Zsolt [Radiation Safety Department, Institute of Isotopes, Hungarian Academy of Sciences, Konkoly-Thege utca 29-33, H-1121, Budapest (Hungary)], E-mail: varga@iki.kfki.hu

    2007-10-15

    An easy and reproducible preparation of manganese dioxide impregnated resin of homogeneous particles has been described. The characteristics of radium, thorium, uranium and plutonium uptake (pH dependency, kinetic studies and matrix dependency) have been determined in batch mode. The resin due to its high efficiency for radium, uranium and thorium at neutral pH values can be an effective tool for radionuclide pre-concentration from liquid samples even with high dissolved solid content.

  9. Salts of the iodine oxyacids in the impregnation of adsorbent charcoal for trapping radioactive methyliodide

    International Nuclear Information System (INIS)

    Deitz, V.R.; Blachly, C.H.

    1977-01-01

    Radioactive iodine and radioactive methyliodide can be more than 99.7 percent removed from the air stream of a nuclear reactor by passing the air stream through a 2-inch thick filter which is made up of impregnated charcoal prepared by contacting the charcoal with a solution containing KOH, iodine or an iodide, and an oxyacid, followed by contacting with a solution containing a tertiary amine. 3 claims

  10. Electron radiation curing of particle boards and fiber building boards impregnated with artificial resins

    Energy Technology Data Exchange (ETDEWEB)

    Schaudy, R.; Proksch, E. (Oesterreichisches Forschungszentrum Seibersdorf GmbH Inst. fuer Chemie)

    1980-06-01

    The hardening of wood particle boards and fiber building boards impregnated with artificial resins using a technical electron accelerator was examined. Suitable resin-monomer mixtures were selected by in-vitro-tests. A styrene-free unsaturated polyester resin and acrylic-modified melamine resins turned out be suitable, whereas other unsaturated polyesters and activators used for curing by gamma irradiation did not fit. The hardened boards showed markedly inceased hardness and reduced swelling, but only moderate weather resistance.

  11. Improvement of the process for electrochemical impregnation of nickel hydroxide electrodes

    Science.gov (United States)

    Comtat, M.; Lafage, B.; Leonardi, J.

    1986-01-01

    Nickel hydroxide electrodes containing 11g/dsqm hydroxide, with capacities of 3.6 to 3.8 Ah/dsqm were prepared at 353 K by electrochemical impregnation. The reproducibility of the results is obtained by readjusting the pH before each preparation. The control of each electrode is done during two cycles of charge and discharge following the manufacture by a potential relaxation method.

  12. Layer impregnation method : a new process to fabricate catalyst layers for fuel cells

    OpenAIRE

    Batzer, Martin

    2012-01-01

    Diese Arbeit beschreibt die”layer impregnation method“, ein neuartiges Verfahren zur Herstellung von Katalysatorschichten für Brennstoffzellen. Bei dieser Methode wird zunächst eine Elektrodenschicht aus einem Katalysatorträger erzeugt, welche dann mit einer katalysatorprecursorhaltigen Lösung imprägniert wird. Durch anschließende chemische Abscheidung bilden sich direkt in der Elektrodenschicht Katalysatorpartikel aus, die auf dem Katalysatorträger anhaften - so entsteht die einsatzbereite K...

  13. Negative plates for dry-charged lead storage batteries. [higher charging capacity when impregnated with tannin solution

    Energy Technology Data Exchange (ETDEWEB)

    Fiedler, V.; Malikova, V.; Weber, H.

    1970-09-15

    Impregnation of negative plates with acid solutions of sulfomethylated tannins was found to improve the charging properties at low temperatures. Methods for synthesizing tannins are described. Charging capacity at 0/sup 0/ was 7.3A. (RWR)

  14. Effects of tanalith-e impregnation substance on bending strengths and modulus of elasticity in bending of some wood types

    Directory of Open Access Journals (Sweden)

    Hakan Keskin

    2016-04-01

    Full Text Available The aim of this study was to investigate the effects of impregnation with Tanalith-E on the bending strengths and modulus of elasticity in bending of some wood types. The test samples prepared from beech, oak, walnut, poplar, ash and pine wood materials - that are of common use in the forest products industry of TURKEY - according to TS 345, were treated with according to ASTM D 1413-76 substantially. Un-impregnated samples according to impregnated wood materials, the bending strengths in beech to 6.83%, 5.12% in ash, 5.93% in pine, the elasticity module values to 7.15% in oak and ash, at a rate of 6.58% in the higher were found. The highest values of bending strengths and modulus of elasticity in bending were obtained in beech and ash woods impregnated with Tanalith-E, whereas the lowest values were obtained in the poplar wood.

  15. Effect Of Reaction Environments On The Reactivity Of PCB (2-Chlorobiphenyl) Over Activated Carbon Impregnated With Palladized Iron

    Science.gov (United States)

    Reactive activated carbon (RAC) impregnated with palladized iron nanoparticles has been developed to treat polychlorinated biphenyls (PCBs). In this study, we evaluated the effects of various reaction environments on the adsorption-mediated dechlorination of 2-chlorobiphenyl (2-...

  16. Steam pretreatment of Saccharum officinarum L. bagasse by adding of impregnating agents for advanced bioethanol production.

    Science.gov (United States)

    Verardi, A; Blasi, A; De Bari, I; Calabrò, V

    2016-12-01

    The main byproduct of the sugarcane industry, Saccharum officinarum L. bagasse (sugarcane bagasse, SCB), is widely used as lignocellulose biomass for bio-ethanol (EtOH) production. In this research study, SCB was pretreated by steam explosion (SE) method using two different impregnating agents: sulfur dioxide (SD) and hydrogen peroxide (HP). As matter of fact, the use of impregnating agents improves the performance of SE method, increasing the concentrations of fermentable sugars after enzymatic saccharification, and decreasing the inhibitor compounds produced during the steam pretreatment step. The aim of this study was to investigate and compare the use of the two impregnating agents in various SE-conditions in order to optimize pretreatment parameters. For every pretreatment condition, it has been evaluated: concentration of fermentable sugars, glucose and xylose yields, and the effects of the inhibitor compounds on enzymatic hydrolysis step. The obtained results allow to improve the efficiency of the whole process of bio-EtOH synthesis enhancing the amount of fermentable sugars produced and the eco-sustainability of the whole process. Indeed, the optimization of steam pretreatment leads to a reduction of energy requirements and to a lower environmental impact. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Development of silver impregnated alumina for iodine separation from off-gas streams

    Energy Technology Data Exchange (ETDEWEB)

    Funabashi, Kiyomi; Fukasawa, Tetsuo; Kikuchi, Makoto [Energy Research Laboratory, Hitachi (Japan)] [and others

    1995-02-01

    An inorganic iodine adsorbent, silver impregnated alumina (AgA), has been developed to separate iodine effectively from off-gas streams of nuclear facilities and to decrease the volume of waste (spent adsorbent). Iodine removal efficiency was improved at relatively high humidity by using alumina carrier with two different pore diameters. Waste volume reduction was achieved by impregnating relatively large amounts of silver into the alumina pores. The developed adsorbent was tested first with simulated off-gas streams under various experimental conditions and finally with actual off-gas streams of the Karlsruhe reprocessing plant. The decontamination factor (DF) was about 100 with the AgA bed depth of 2cm at 70% relative humidity, which was a DF one order higher than that when AgA with one pore size was used. Iodine adsorption capacity was checked by passing excess iodine into the AgA bed. Values were about 0.12 and 0.35 g-I/cm`-AgA bed for 10 and 24wt% silver impregnated AgA, respectively. The results obtained in this study demonstrated the applicability of the developed AgA to the off-gas treatment system of nuclear facilities.

  18. [Preparation and characterization of activated carbon-silver composite with antibacterial behavior via vacuum impregnation method].

    Science.gov (United States)

    Wang, Zi-Qiang; Liu, Shou-Xin

    2011-01-01

    Activated carbon-silver composite (Ag/AC) for antibacterial performance by controlling silver release was prepared by silver acetate vacuum impregnation method. The antibacterial activity towards E. coil and resistance of water erosion was investigated through distilled water. Surface area and porosity analyzer, Scanning electron spectroscopy (SEM) and X-ray diffraction (XRD) were used to characterize the surface morphology and pore properties. The results show that Ag0 was deposited on AC symmetrically. The content of silver supported and particle size were increased by the increasing of the concentration of CH3 COOAg, while specific surface area, total pore volume and average pore size were decreased. Ag/AC prepared with silver content of 0.97% which killed 10(7) CFU/mL concentration of E. coil in 120 min exhibited the similar antibacterial activity for E. coil with that prepared by traditional impregnation method. However, the silver loss of the Ag/AC prepared with silver content of 0.97% was 37.6%, showing much higher resistance to water erosion. High antibacterial activity and control silver release can be simultaneously realized by the silver acetate vacuum impregnation method.

  19. Novel Aluminum Oxide-Impregnated Carbon Nanotube Membrane for the Removal of Cadmium from Aqueous Solution

    Directory of Open Access Journals (Sweden)

    Ihsanullah

    2017-09-01

    Full Text Available An aluminum oxide-impregnated carbon nanotube (CNT-Al2O3 membrane was developed via a novel approach and used in the removal of toxic metal cadmium ions, Cd(II. The membrane did not require any binder to hold the carbon nanotubes (CNTs together. Instead, the Al2O3 particles impregnated on the surface of the CNTs were sintered together during heating at 1400 °C. Impregnated CNTs were characterized using XRD, while the CNT-Al2O3 membrane was characterized using scanning electron microscopy (SEM. Water flux, contact angle, and porosity measurements were performed on the membrane prior to the Cd(II ion removal experiment, which was conducted in a specially devised continuous filtration system. The results demonstrated the extreme hydrophilic behavior of the developed membrane, which yielded a high water flux through the membrane. The filtration system removed 84% of the Cd(II ions at pH 7 using CNT membrane with 10% Al2O3 loading. A maximum adsorption capacity of 54 mg/g was predicted by the Langmuir isotherm model for the CNT membrane with 10% Al2O3 loading. This high adsorption capacity indicated that adsorption was the main mechanism involved in the removal of Cd(II ions.

  20. Augmentation of tendon healing with butyric acid-impregnated sutures: biomechanical evaluation in a rabbit model.

    Science.gov (United States)

    Leek, Bryan T; Tasto, James P; Tibor, Lisa M; Healey, Robert M; Freemont, Anthony; Linn, Michael S; Chase, Derek E; Amiel, David

    2012-08-01

    Butyric acid (BA) has been shown to be angiogenic and to enhance transcriptional activity in tissue. These properties of BA have the potential to augment biological healing of a repaired tendon. To evaluate this possibility both biomechanically and histologically in an animal tendon repair model. Controlled laboratory study. A rabbit Achilles tendon healing model was used to evaluate the biomechanical strength and histological properties at 6 and 12 weeks after repair. Unilateral tendon defects were created in the middle bundle of the Achilles tendon of each rabbit, which were repaired equivalently with either Ultrabraid BA-impregnated sutures or control Ultrabraid sutures. After 6 weeks, BA-impregnated suture repairs had a significantly increased (P Tendons repaired with BA-impregnated sutures demonstrated improved biomechanical properties at 6 weeks relative to control sutures, suggesting a neoangiogenic mechanism of enhanced healing through an increased myofibroblast presence. These findings demonstrate that a relatively simple alteration of suture material may augment early tendon healing to create a stronger repair construct during this time.

  1. Synthesis of carbon nanofibers on impregnated powdered activated carbon as cheap substrate

    Directory of Open Access Journals (Sweden)

    A.A. Mamun

    2016-07-01

    Full Text Available The catalysis and characterization of carbon nanofibers (CNFs composite are reported in this work. Carbon nanofibers were produced on oil palm shell powdered activated carbon (PAC, which was impregnated with nickel. Chemical Vapor Deposition (CVD of C2H2 was used in the presence of hydrogen at ∼650 °C. The flow rates of carbon source and hydrogen were fixed. The CNFs formed directly on the surface of the impregnated PAC. Variable weight percentages (1%, 3%, 5%, 7% and 9% of the catalyst salt (Ni+2 were used for the impregnation. However, the best catalysis was observed on the substrate with 3% Ni+2. The product displayed a relatively high surface area, essentially constituted by the external surface. New functional groups also appeared compared to those in the PAC. Field Emission Scanning Microscopy (FESEM, Transmission Electron Microscopy (TEM, Fourier Transform Infrared (FTIR, BET surface area analysis and energy dispersive X-ray (EDX were used for the characterization of the new carbon nano product, which was produced through a clean novel process.

  2. Impregnation of glass fibres with polymethylmethacrylate using a powder-coating method

    Science.gov (United States)

    Vallittu, Pekka K.

    1995-01-01

    The aim of this study was to evaluate the usefulness of a powder-coating method to impregnate glass fibres with polymethylmethacrylate (PMMA) for dental purposes. The continuous unidirectional E-glass fibres, the surface of which had been treated with precured silane, were powder-coated with spherical PMMA particles. Before the powder-coated prepregs were used, the incorporated PMMA powder was dissolved with methylmethacrylate monomer. The degree of impregnation of the polymerized composite was determined with a scanning electron microscope. The results revealed that the mean degree of impregnation varied from 0.87 to 0.92, being lower in the heat-cured PMMA group (which simulated fabrication of a new denture), and higher in the autopolymerizing group (which simulated the repair of a fractured denture). The means between the two groups did not, however, differ significantly ( p=0.249). The results suggest that, even though the method has some shortcomings in terms of dental laboratory technology, the powder-coating method can be used to fabricate or repair acrylic resin-based dentures.

  3. Theoretical impact of insecticide-impregnated school uniforms on dengue incidence in Thai children.

    Science.gov (United States)

    Massad, Eduardo; Amaku, Marcos; Coutinho, Francisco Antonio Bezerra; Kittayapong, Pattamaporn; Wilder-Smith, Annelies

    2013-03-28

    Children carry the main burden of morbidity and mortality caused by dengue. Children spend a considerable amount of their day at school; hence strategies that reduce human-mosquito contact to protect against the day-biting habits of Aedes mosquitoes at schools, such as insecticide-impregnated uniforms, could be an effective prevention strategy. We used mathematical models to calculate the risk of dengue infection based on force of infection taking into account the estimated proportion of mosquito bites that occur in school and the proportion of school time that children wear the impregnated uniforms. The use of insecticide-impregnated uniforms has efficacy varying from around 6% in the most pessimistic estimations, to 55% in the most optimistic scenarios simulated. Reducing contact between mosquito bites and human hosts via insecticide-treated uniforms during school time is theoretically effective in reducing dengue incidence and may be a valuable additional tool for dengue control in school-aged children. The efficacy of this strategy, however, is dependent on the compliance of the target population in terms of proper and consistent wearing of uniforms and, perhaps more importantly, the proportion of bites inflicted by the Aedes population during school time.

  4. Theoretical impact of insecticide-impregnated school uniforms on dengue incidence in Thai children

    Directory of Open Access Journals (Sweden)

    Eduardo Massad

    2013-03-01

    Full Text Available Background: Children carry the main burden of morbidity and mortality caused by dengue. Children spend a considerable amount of their day at school; hence strategies that reduce human–mosquito contact to protect against the day-biting habits of Aedes mosquitoes at schools, such as insecticide-impregnated uniforms, could be an effective prevention strategy. Methodology: We used mathematical models to calculate the risk of dengue infection based on force of infection taking into account the estimated proportion of mosquito bites that occur in school and the proportion of school time that children wear the impregnated uniforms. Principal findings: The use of insecticide-impregnated uniforms has efficacy varying from around 6% in the most pessimistic estimations, to 55% in the most optimistic scenarios simulated. Conclusions: Reducing contact between mosquito bites and human hosts via insecticide-treated uniforms during school time is theoretically effective in reducing dengue incidence and may be a valuable additional tool for dengue control in school-aged children. The efficacy of this strategy, however, is dependent on the compliance of the target population in terms of proper and consistent wearing of uniforms and, perhaps more importantly, the proportion of bites inflicted by the Aedes population during school time.

  5. Effect of preceramic and Zr coating on impregnation behaviors of SiC ceramic composite

    Science.gov (United States)

    Jung, Yang-Il; Kim, Sun-Han; Kim, Hyun-Gil; Park, Jeong-Yong; Koo, Yang-Hyun

    2015-01-01

    SiC fiber-reinforced ceramic composites were fabricated using a polymer impregnation and pyrolysis process. To develop the low temperature process, the pyrolysis was conducted at 600 °C in air. Both a microstructural observation and a mechanical test were utilized for the evaluation of the impregnation. For the impregnation, two kinds of polycarbosilane having a different degree of cross-linking were used. The level of cross-linking affected the ceramic yield of the composites. The cross-linking under oxygen containing atmosphere resulted in a dense matrix and high density of filling. However, tight bonding between the matrix and fibers in the fully dense composite samples, which was obtained using a cross-linking agent of divinylbenzene, turned out to be deteriorative on the mechanical properties. The physical isolation of fibers from matrix phase in the composites was very important to attain a mechanical ductility. The brittle fracture was alleviated by introducing an interphase coating with metallic Zr. The combination of forming the dense matrix and interphase coating should be a necessary condition for the SiCf/SiC fiber-reinforce composite, and it is practicable by controlling the process parameters.

  6. Effects of heat treatment on sound absorption coefficients in nanosilver-impregnated and normal solid woods.

    Science.gov (United States)

    Esmailpour, Ayoub; Taghiyari, Hamid Reza; Zolfaghari, Habib

    2017-06-01

    Effects of impregnation with silver nano-suspension as well as heat-treatment on sound absorption coefficients (AC) were studied in tangential direction of five different solid woods based on their importance. AC was measured at two frequencies of 250 and 500 Hz. A 400 ppm nanosuspension was used for the impregnation; silver nanoparticles had a size range of 30-80 nm. Based on the obtained results, the species reacted significantly different in absorbing sound at the two frequencies. Impregnation with nano-suspension substantially decreased AC at the lower frequency of 250 Hz; it did not show any particular trend when AC was measured at the frequency of 500 Hz. Heat treatment significantly increased AC at the frequency of 250 Hz. ACs of mulberry tended to be similar at the two frequencies; in the other four species though, ACs were significantly different. High significant correlations were found in the hardwoods between the ACs measured at the two frequencies.

  7. Adhesion enhancement of sol-gel coating on polycarbonate by heated impregnation treatment

    International Nuclear Information System (INIS)

    Wu, Linda Y.L.; Boon, L.; Chen, Z.; Zeng, X.T.

    2009-01-01

    The main limitation in using coated plastics for optical components, electronic applications and display systems is the softness of the substrate surfaces, which is responsible for the low impact and abrasion resistance and weak adhesion between the coating and the substrate. In this paper, we report a new strategy for surface pre-treatment of plastics using heated vacuum equipment and sol-gel materials to provide both chemical bonds and penetrated hard layer into the plastic surface to increase the overall performance of the coated plastic components. The heated vacuum treatment process involves: (1) surface cleaning and pore opening by heating and vacuum conditions, (2) impregnation of hydrolyzed hybrid precursor into polymer substrate under pressure and elevated temperature, (3) aminolysis of diffused precursor with surface to form chemical bonds and hardened surface layer, (4) formation of chemical bonds at treated surface with sol-gel hard coating. An impregnation depth of 1.5 μm was detected. Water contact angle dropped to below 40 o and roughness increased after treatment. These provided better adhesion by increased wettability and contact area. Much increased nanoindentation hardness and Young's modulus after impregnation provided a gradient in mechanical properties between soft substrate and hard sol-gel coating. The hardened substrate delays the plastic deformation in substrate during pencil scratch test, thereby preventing early gouge failure. Both the better adhesion and the delayed gouge failure contributed to the increased scratch resistance from 6B to 8H after sol-gel coating.

  8. Drug-polymer filled micro-containers for oral delivery loaded using supercritical CO2 aided-impregnation

    DEFF Research Database (Denmark)

    Marizza, Paolo; Keller, Stephan Sylvest; Rades, T.

    2013-01-01

    In this work we present an effective loading technique of micro-containers for oral drug delivery of a poorly water soluble drug in a solid dispersion with polymer. By combining inkjet printing and supercritical CO2 impregnation we load ketoprofen in a solid dispersion with poly......(vinylpyrrolidone) (PVP) into cylindrical micro-containers providing unidirectional release. Both the printing and the impregnation step can be tuned in order to control drug loading with accuracy in the range of micro-grams....

  9. Interaction of the wood surface with metal ions. Part 3: The effects of light on chromium impregnated wood surface

    International Nuclear Information System (INIS)

    Stipta, J.; Németh, K.; Molnárné Hamvas, L.

    2004-01-01

    UV-light changes of untreated and chromium impregnated wood surface were investigated by absorption spectrophotometric methods. The properties of indifferent silicagel and celulose layers were to the behaviour of poplar and black locust surface. Chromic-ion-impregnation had no significant effect on the absorption spectra of these layers. On the other hand, hexavalent chromium was reduced and UV-light caused irreversible wood degradation. Surface treatment caused considerable modification in black locust

  10. Fabrication of a form- and size-variable microcellular-polymer-stabilized metal nanocomposite using supercritical foaming and impregnation for catalytic hydrogenation

    Science.gov (United States)

    2012-01-01

    This article presents the fabrication of size-controllable and shape-flexible microcellular high-density polyethylene-stabilized palladium nanoparticles (Pd/m-HDPE) using supercritical foaming, followed by supercritical impregnation. These nanomaterials are investigated for use as heterogeneous hydrogenation catalysts of biphenyls in supercritical carbon dioxide with no significant surface and inner mass transfer resistance. The morphology of the Pd/m-HDPE is examined using scanning electron microscopy images of the pores inside Pd/m-HDPE catalysts and transmission electron microscopy images of the Pd particles confined in an HDPE structure. This nanocomposite simplifies industrial design and operation. These Pd/m-HDPE catalysts can be recycled easily and reused without complex recovery and cleaning procedures. PMID:22651135

  11. Investigation of the metabolic consequences of impregnating spinach leaves with trehalose and applying a pulsed electric field.

    Science.gov (United States)

    Dymek, Katarzyna; Panarese, Valentina; Herremans, Els; Cantre, Dennis; Schoo, Rick; Toraño, Javier Sastre; Schluepmann, Henriette; Wadso, Lars; Verboven, Pieter; Nicolai, Bart M; Dejmek, Petr; Gómez Galindo, Federico

    2016-12-01

    The impregnation of leafy vegetables with cryoprotectants using a combination of vacuum impregnation (VI) and pulsed electric fields (PEF) has been proposed by our research group as a method of improving their freezing tolerance and consequently their general quality after thawing. In this study, we have investigated the metabolic consequences of the combination of these unit operations on spinach. The vacuum impregnated spinach leaves showed a drastic decrease in the porosity of the extracellular space. However, at maximum weight gain, randomly located air pockets remained, which may account for oxygen-consuming pathways in the cells being active after VI. The metabolic activity of the impregnated leaves showed a drastic increase that was further enhanced by the application of PEF to the impregnated tissue. Impregnating the leaves with trehalose by VI led to a significant accumulation of trehalose-6-phosphate (T6P), however, this was not further enhanced by PEF. It is suggested that the accumulation of T6P in the leaves may increase metabolic activity, and increase tissue resistance to abiotic stress. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. [Influence on Strychni Semen's Analgesic Effect and Toxicity of Milk-Impregnated- Processing-Technology of Traditional Uighur Medicine].

    Science.gov (United States)

    Tursun, D; Shi, Yu-zhu; Yang, Qiao-li; Liu, Yan; Xue, Wen-cai; Abas, A; Yang, Wei-jun

    2015-02-01

    To investigate the effects of different processing methods on analgesic effect and toxicity of Strychni Semen, and to provide the scientific basis of milk-impregnated-processing-technology of traditional Uighur medicine for toxic medicines. Three different methods, frying with sand of traditional Chinese medicine (1), cooled milk-impregnated-processing-technology of traditional Uighur medicine (2), and heated milk-impregnated-processing-technology of traditional Uighur medicine (3) were used to process raw Strychni Semen and the processed products were compared with those in the raw drug (4). Karber method was used to caculate the LD50. The LD50 of (4), (1), (2) and (3)were 273.0, 289.3, 289.3 and 339.2 mg/kg,successively. Low dose group of heated milk-impregnated-processing-technology, low and high dose groups of cooled milk-impregnated-processing-technology had significant inhibition on the acetic acid-induced writhing reaction in mice (P effect in mice while improving the LD50 of mouse, which illustrates milk-impregnated-processing- technology's pharmacological mechanism on efficacy enhancing and toxicity reducing of Strychni Semen.

  13. Fe-Impregnated Mineral Colloids for Peroxide Activation: Effects of Mineral Substrate and Fe Precursor.

    Science.gov (United States)

    Li, Yue; Machala, Libor; Yan, Weile

    2016-02-02

    Heterogeneous iron species at the mineral/water interface are important catalysts for the generation of reactive oxygen species at circumneutral pH. One significant pathway leading to the formation of such species arises from deposition of dissolved iron onto mineral colloids due to changes in redox conditions. This study investigates the catalytic properties of Fe impregnated on silica, alumina, and titania nanoparticles (as prototypical mineral colloids). Fe impregnation was carried out by immersing the mineral nanoparticles in dilute Fe(II) or Fe(III) solutions at pH 6 and 3, respectively, in an aerobic environment. The uptake of iron per unit surface area follows the order of nTiO2 > nAl2O3 > nSiO2 for both types of Fe precursors. Impregnation of mineral particles in Fe(II) solutions results in predominantly Fe(III) species due to efficient surface-mediated oxidation. The catalytic activity of the impregnated solids to produce hydroxyl radical (·OH) from H2O2 decomposition was evaluated using benzoic acid as a probe compound under dark conditions. Invariably, the rates of benzoic acid oxidation with different Fe-laden particles increase with the surface density of Fe until a critical density above which the catalytic activity approaches a plateau, suggesting active Fe species are formed predominantly at low surface loadings. The critical surface density of Fe varies with the mineral substrate as well as the aqueous Fe precursor. Fe impregnated on TiO2 exhibits markedly higher activity than its Al2O3 and SiO2 counterparts. The speciation of interfacial Fe is analyzed with diffuse reflectance UV-vis analysis and interpretation of the data in the context of benzoic oxidation rates suggests that the surface activity of the solids for ·OH generation correlates strongly with the isolated (i.e., mononuclear) Fe species. Therefore, iron dispersed on mineral colloids is a significant form of reactive iron surfaces in the aquatic environment.

  14. Inkjet Impregnation for Tailoring Air Electrode Microstructure to Improve Solid Oxide Cells Performance

    KAUST Repository

    Da’as, Eman H.

    2015-09-30

    The urge to lower the operating temperature of solid oxide cells (SOCs) to the intermediate ranges between 500-700°C motivated the research into impregnation processes, which offer highly efficient SOC air electrodes at low operating temperatures. Lack of controllability and reproducibility of this technique in the conventional way is still considered as an inadequacy for industrialization since it is performed manually. Therefore, inkjet-printing technology was proposed as an adequate approach to perform scalable and controllable impregnation for SOC air electrodes, which in turn leads to low operating temperatures. Composite LSM-ionic conductive air electrodes of weight ratio 1:2 were fabricated by inkjet impregnation of lanthanum strontium manganite (La0.8Sr0.2MnO3) precursor nitrates onto a porous ionic conductive backbone structure. First, porous yttria stabilized zirconia (8YSZ) substrates prepared by tape casting were used to study the influence of the printing parameters on the lateral dispersion and penetration of LSM ink inside the pores. XRD analysis confirmed the formation of LSM phase after calcination at 800°C for 2 h, while SEM revealed the formation of LSM nanostructures. It has been found by optical microscope observations that the spacing between the drops and the substrate temperature have a significant role in controlling the printing process. Next, the optimized printing parameters were applied in the inkjet impregnation of the LSM ink into porous YSZ electrodes that were spin coated on both sides of dense YSZ layers. LSM-YSZ composite air electrodes achieved an area specific resistance (ASR) of around 0.29 Ω.cm2 at 700°C. The performance of LSM-YSZ composite electrodes was influenced by the microstructure and the thickness, and by the electrode/electrolyte interface characteristics. As a result, the enhancement in LSM-YSZ composite electrode performance was observed due to the better percolation in LSM, YSZ and oxygen diffusion. Finally

  15. Quantization Procedures

    International Nuclear Information System (INIS)

    Cabrera, J. A.; Martin, R.

    1976-01-01

    We present in this work a review of the conventional quantization procedure, the proposed by I.E. Segal and a new quantization procedure similar to this one for use in non linear problems. We apply this quantization procedures to different potentials and we obtain the appropriate equations of motion. It is shown that for the linear case the three procedures exposed are equivalent but for the non linear cases we obtain different equations of motion and different energy spectra. (Author) 16 refs

  16. Mycobacterium tuberculosis thymidylate kinase antigen assays for designating incipient, high-risk latent M.tb infection.

    Science.gov (United States)

    Wayengera, Misaki; Kateete, David P; Asiimwe, Benon; Joloba, Moses L

    2018-03-16

    Precise designation of high risk forms of latent Mycobacterium tuberculosis-M.tb infections (LTBI) is impossible. Delineation of high-risk LTBI can, however, allow for chemoprophylaxis and curtail majority cases of active tuberculosis (ATB). There is epidemiological evidence to support the view that LTBI in context of HIV-1 co-infection is high-risk for progression to ATB relative to LTBI among HIV-ve persons. We recently showed that assays of M.tb thymidylate kinase (TMKmt) antigen and host specific IgG can differentiate ATB from LTBI and or no TB (NTB, or healthy controls). In this study, we aimed to expose the differential levels of TMKmt Ag among HIV+ve co-infected LTBI relative to HIV-ve LTBI as a strategy to advance these assays for designating incipient LTBI. TMKmt host specific IgM and IgG detection Enzyme Immuno-Assays (EIA) were conducted on 40 TB exposed house-hold contacts (22 LTBI vs. 18 no TB (NTB) by QunatiFERON-TB GOLD®); and TMKmt Ag detection EIA done on 82 LTBI (46 HIV+ve vs 36 HIV-ve) and 9 NTB (American donors). Purified recombinant TMKmt protein was used as positive control for the Ag assays. IgM levels were found to be equally low across QuantiFERON-TB GOLD® prequalified NTB and TB exposed house-hold contacts. Higher TMKmt host specific IgG trends were found among TB house-hold contacts relative to NTB controls. TMKmt Ag levels among HIV+ve LTBI were 0.2676 ± 0.0197 (95% CI: 0.2279 to 0.3073) relative to 0.1069 ± 0.01628 (95% CI: 0.07385 to 0.14) for HIV-ve LTBI (supporting incipient nature of LTBI in context of HIV-1 co-infection). NTB had TMKmt Ag levels of 0.1013 ± 0.02505 (5% CI: 0.0421 to 0.1606) (intimating that some were indeed LTBI). TMKmt Ag levels represent a novel surrogate biomarker for high-risk LTBI, while host-specific IgG can be used to designate NTB from LTBI.

  17. The interaction of a vortex ring with a sloped sediment layer: Critical criteria for incipient grain motion

    Science.gov (United States)

    Munro, R. J.

    2012-02-01

    Experiments were performed to analyse the interaction between a vortex ring and a sloped sediment layer. Attention focussed on interactions under "critical" conditions, in which sediment motion was only just induced by the ring's flow field. Both hydraulically smooth and hydraulically rough bedforms were analysed, using near-spherical monodisperse sediments with relative densities of 1.2 and 2.5 and mean diameters (dp) ranging between 80 and 1087 μm. Measurements of the vortex-ring flow field were obtained, during the interaction, using two-dimensional particle imaging velocimetry. The threshold conditions for incipient sediment motion were analysed in terms of the critical Shields parameter (Nc), defined in terms of the peak tangential velocity measured adjacent to the bed surface. Bed-slope effects were investigated by tilting the sediment layer at various angles between the horizontal and the repose limit for the sediment. In all cases, the propagation axis of the vortex ring was aligned normal to the bed surface. The measured values of Nc were compared with a force-balance model based on the conditions for incipient grain motion on a sloping bed. For hydraulically smooth bedforms, where the bed roughness is small compared to the boundary-layer depth, the model was derived to account for how viscous stresses affect the drag and lift forces acting on the near surface sediment. For hydraulically rough bedforms, where this viscous-damping effect is not present, the model assumes the drag and lift forces scale with the square of the near-bed (inviscid) velocity scale. In both cases, the model predicts that bedforms become more mobile as the bed slope is increased. However, the damping effect of the viscous sublayer acts as a stabilizing influence for hydraulically smooth bedforms, to reduce the rate at which the bed mobility increases with bed slope. The measured values of Nc were in agreement with the trends predicted by this model, and exhibit a transition in

  18. Mitochondrial DNA evidences reflect an incipient population structure in Atlantic goliath grouper (Epinephelus itajara, Epinephelidae in Brazil

    Directory of Open Access Journals (Sweden)

    Júnio S. Damasceno

    2015-12-01

    Full Text Available The Atlantic goliath grouper is a critically endangered species that inhabits estuarine and reef environments and is threatened primarily by fishing activities and habitat destruction. Despite the urgent need for protection, its genetic conservation status remains unknown. The aim of the present study was to evaluate the gene flow among the populations of the species along the coast of Brazil based on the control region of the mitochondrial DNA. The results indicate low haplotype diversity (0.40-0.86 and very low nucleotide diversity (0.1-0.5%. They also show that the genetic diversity of the species varies considerably along the coast and that this finding may be especially important for the identification of priority areas for its conservation. The population analyses indicate a low but significant degree of genetic structuring (ΦST =0.111, probably due to the occurrence of rare haplotypes at some locations, although the genetic differentiation between sites was not correlated with geographic distance (r=0.0501; p=0.7719, and the shared haplotypes indicate that gene flow occurs among all locations along the Brazilian coast. The results of the pairwise FST indicate a high degree of genetic differentiation between locations. The incipient population structuring detected in the present study is not related systematically to the geological or physical features of the Brazilian coast. The complex interaction of fluctuations in sea level, marine currents, and the reproductive characteristics of the species hampers the identification of the specific role of each of these processes in the gene flow dynamics of the population units of the Atlantic goliath grouper. The low overall levels of genetic diversity, the pairwise FST values and the significant population structuring among groups (ΦCT identified in the present study all reinforce the critically endangered status of the species and are inconsistent with the presence of a single, panmictic

  19. Rationale for one stage exchange of infected hip replacement using uncemented implants and antibiotic impregnated bone graft.

    Science.gov (United States)

    Winkler, Heinz

    2009-09-04

    biomechanical properties. Efficient cementing techniques will result in tight bonding with the underlying bone, making eventual removal time consuming and possibly associated with further damage to the osseous structures. All these issues are likely to make uncemented revisions more desirable. Allograft bone may be impregnated with high loads of antibiotics using special incubation techniques. The storage capacities and pharmacological kinetics of the resulting antibiotic bone compound (ABC) are more advantageous than the ones of antibiotic loaded cement. ABC provides local concentrations exceeding those of cement by more than a 100fold and efficient release is prolonged for several weeks. The same time they are likely to restore bone stock, which usually is compromised after removal of an infected endoprosthesis. ABC may be combined with uncemented implants for improved long term results and easy removal in case of a failure. Specifications of appropriate designs are outlined. Based on these considerations new protocols for one stage exchange of infected TJR have been established. Bone voids surrounding the implants may be filled with antibiotic impregnated bone graft; uncemented implants may be fixed in original bone. Recent studies indicate an overall success rate of more than 90% without any adverse side effects. Incorporation of allografts appears as after grafting with unimpregnated bone grafts. Antibiotic loaded bone graft seems to provide sufficient local antibiosis for protection against colonisation of uncemented implants, the eluted amounts of antibiotics are likely to eliminate biofilm remnants, dead space management is more complete and defects may be reconstructed efficiently. Uncemented implants provide improved long term results in case of success and facilitated re-revision in case of failure. One stage revision using ABC together with uncemented implants such should be at least comparably save as multiple stage procedures, taking advantage of the obvious

  20. Fixation of aqueous tritiated waste in polymer impregnated concrete and in polyacetylene

    International Nuclear Information System (INIS)

    Colombo, P.; Neilson, R. Jr.; Steinberg, M.

    1975-01-01

    Tritiated aqueous waste can be used to hydrate hydraulic cement producing a concrete that contains a network of interconnected porosity. Such a product is subject to water intrusion and subsequent tritium loss by leaching and exchange. Techniques have been developed to impregnate this porosity with styrene monomer which is then polymerized in situ, resulting in a concrete that is essentially impermeable while its strength, durability, and resistance to chemical attack are significantly improved. Tritium bulk leach rates as low as 1.68 x 10 -4 g/(cm 2 -day) have been measured for polymer-impregnated concrete in water. An adsorbent additive can be incorporated to increase the specific tritiated waste loading of the concrete. Depending upon the formulations, these composites incorporate 5.8 to 8.3 liters HTO per cubic foot. Tritiated aqueous waste can also be fixed in polymeric form as polyacetylene through reaction with calcium carbide to form tritiated acetylene which is subsequently polymerized. Acetylene polymerization is accomplished by either 60 Co gamma irradiation or thermal catalysis over cupric oxide. The tritiated polyacetylene produced can contain up to 50 atomic percent tritium and is essentially non-leachable, insoluble, thermally stable to 325 0 C, and chemically inert. The bulk leach rate of tritiated polyacetylene was determined to be of the order of 1.8 x 10 -8 g/(cm 2 -day). Radiolysis by 60 Co gamma irradiation results in a G value for hydrogen production of 0.15 molecules/100 eV. Tritiated polyacetylene can be incorporated as an aggregate in concrete, polymer concrete, or polymer impregnated concrete to form a monolithic solid

  1. Factors affecting the retention of methyl iodide by iodide-impregnated carbon

    International Nuclear Information System (INIS)

    Hyder, M.L.; Malstrom, R.A.

    1991-01-01

    This paper comprises two sets of studies of methyl iodide retention by iodide-impregnated carbon. In the first of these, the retention of the methyl iodide on the carbon surface and its subsequent evolution were observed directly by a technique of combustion and phosphorescence. In the second, the methyl iodide retention in a standard test was compared with surface area measurements and the concentration of unreacted iodine. A correlation among these parameters was identified and characterized. Carbon quality was varied through the selection of used material with differing service histories. Air from the Savannah River Site reactor buildings is vented through carbon beds for control of radioiodine before release to the atmosphere. The carbon used is North American Carbon Co. type GX-176 coconut shell carbon impregnated with 1% triethylenedimaine (TEDA) and 2% potassium iodide by weight. Replacement intervals for the carbon have been as long as thirty months. Analysis of samples withdrawn at much shorter times has shown that the TEDA is lost after a few months, and the performance of the carbon for methyl iodide retention is dependent on the iodide impregnant. Efficient methyl iodide retention is not a requirement for carbon in this service; however, methyl iodide retention as measured by the ASTM Test D3803 (method B) has been found to correlate well with other desirable properties of the carbon such as radiation stability. The studies undertaken here were intended to shed light on the changes taking place in this carbon during long-term service and to provide a basis for simpler measurements of carbon quality

  2. Fabrication and Characterization of Polycarbonate Polyurethane (PCPU) Nanofibers Impregnated with Nanofillers

    Science.gov (United States)

    Katakam, Hruday chand

    Polycarbonate polyurethane (PCPU) has been studied as a novel polymer impregnated with nanoparticles for improved mechanical, thermal and adhesion properties. This study investigates the synthesis of polycarbonate polyurethane (PCPU) polymeric nanofiber membranes by the process of electrospinning. This study further examines all the parameters associated with electrospinning a novel PCPU polymeric solution impregnated with nanofillers, such as nanoparticles, to produce fiber membranes. Tetrahydrofuran (THF) and N, N dimethylformamide (DMF) are used as solvents to dissolve PCPU polymer. One percent (1%) of nanofillers like silver and silica nanoparticles are added to PCPU polymer solution to investigate the impact on polymer solution properties, which in turn affects the fiber formation. Process parameters are studied by evaluating the impact each parameter has on the fiber formation. PCPU polymer concentrations of three polymer solutions (PCPU, PCPU + 1% silver and PCPU + 1% silica) with the appropriate solvent mixture ratio are achieved to produce polymeric fiber membranes with minimal bead formation. Polymeric nanofiber membranes of PCPU, PCPU + 1% silver and PCPU + 1% silica are produced using THF/DMF: 70/30 (V/V) solvent mixture. The polymeric nanofiber membranes obtained are characterized by using a scanning electron microscopy, rotational viscometer, tensiometer, contact angle measurement device, fourier transform infrared spectroscopy (FTIR). A comparative life cycle assessment (LCA) is performed to evaluate environmental impacts associated with solvents in the process of producing PCPU polymeric nanofiber membranes. The LCA is completed to gauge the potential impacts PCPU nanofiber membranes may have when utilized for various applications. This study discusses the successful production and characterization of good quality (no beading) polymeric nanofiber membranes of PCPU and novel composites of PCPU + 1% silver and PCPU + 1% silica. This two dimensional

  3. Microwave application on air drying of apple (var. Granny Smith). The influence of vacuum impregnation pretreatment

    Science.gov (United States)

    Martin Esparza, Maria Eugenia

    Combined hot air-microwave drying has been studied on apple (var. Granny Smith), with and without vacuum impregnation (VI) pretreatment with isotonic solution, respect to kinetics, microstructural and final quality items. In order to reach this objective, a drier has been designed and built, that allows to control and to register all the variables which take place during the drying process. Thermal and dielectric properties, that are very important characteristics when studying heat and mass transfer phenomena that occur during the combined drying process, have been related to temperature and/or moisture content throughout empirical equations. It could be observed that all these properties decreased with product moisture content. Respect to dielectric properties, a relationship among water binding forms to food structure and water molecules relaxation frequency has been found. On the other hand, the effect of drying treatment conditions (air rate, drying temperature, sample thickness and incident microwave power) on the drying rate, from an empirical model based on diffusional mechanisms with two kinetic parameters (k1 and k2), both function of the incident microwave power, has been studied. Microwave application to air drying implied a notable decrease on drying time, the higher the applied power the higher the reduction. Microstructural study by Cryo-Sem revealed fast water vaporization taking place when microwaves are applied. Vacuum impregnation did not implied an additional advantage for combined drying as drying rate was similar to that of NIV samples. Finally, it has been studied the influence of process conditions on the color and mechanical properties of the dried product (IV and NIV). Vacuum impregnation implied an increase on the fracture resistance and less purity and tone angle. Microwave application induced product browning with respect to air drying (tone decreased and purity increased).

  4. Influence of Nutrient Impregnated into Zeolite Addition on Anaerobic Digestion of Palm Oil Mill Effluent (POME)

    Science.gov (United States)

    Mellyanawaty, M.; Chusna, F. M. A.; Sudibyo, H.; Nurjanah, N.; Budhijanto, W.

    2018-03-01

    Palm oil mill effluent (POME) was wastewater generated from palm oil milling activities which was brownish liquid, acidic with pH 3-4, and contained soluble materials which were hazardous to the environment. It was characterized by high organic loading (COD 40,000–60,000 mg/L). According to its characteristics, POME was identified as a potential source to generate renewable energy through anaerobic digestion. In other words, a combination of wastewater treatment and renewable energy production would be an additional advantage to the palm oil industries. Methanogenesis was the rate limiting step in anaerobic digestion. In the conventional anaerobic digester, it required large reactors and long retention time. The addition of microbial immobilization media was to improve anaerobic reactor performance in term of higher organic removal and methane production. Additionally, better performance could lead to reduction of reactor volume and shorter retention time in high rate anaerobic digester. The loading of essential microorganism nutrient into the media might increase the affinity of bacteria to attach and grow on the media surface. Activating or inhibition effects of natural and modified zeolite addition in anaerobic digestion of POME was studied in batch reactors using erlenmeyer of 1,000 mL at COD concentrations of about 8,000 mg/L. Zeolite was impregnated with nickel and magnesium at concentrations of 0.0561 mg Ni/g zeolite and 0.0108 mg Mg/g zeolite. The effect of the different zeolite addition was determined by the measurement of soluble COD (sCOD), Volatile Fatty Acids (VFAs) and biogas production. Greater effect of modified zeolite was observed in zeolite impregnated with nickel with a 54% increase of biogas production. Meanwhile, the modified zeolite impregnated with magnesium had no positive impact to the methanogenic bacteria activities.

  5. Renal failure after placement of an articulating, antibiotic impregnated polymethylmethacrlyate hip spacer

    Directory of Open Access Journals (Sweden)

    Robert P. Runner, MD

    2018-03-01

    Full Text Available A 58-year-old male presented with native joint septic arthritis of the hip and osteomyelitis. After treatment with an articulating antibiotic spacer, he developed acute renal failure requiring dialysis. He continued to have elevated serum tobramycin levels exclusively from the antibiotic spacer elution as no intravenous tobramycin was used. Subsequent explantation was required to correct his renal failure. Although renal failure after antibiotic impregnated cement placement is rare, the risk of this potential complication should be considered preoperatively and in the postoperative management of these patients.

  6. Improvement of operational properties of shell limestone building materials by polysulfide solution impregnation

    Directory of Open Access Journals (Sweden)

    MASSALIMOV Ismail Alexandrovich

    2017-06-01

    Full Text Available The data of studies on the effectiveness of impregnation with polysulfide solutions of shell limestone used as facing and wall material, as well as for the manufacture of road products are presented. Modification of the limestone with the impregnating composition «Akvastat» created by the authors which is sulfur-containing water-based solution of calcium polysulfide containing alcohols and surfactants, can significantly reduce water absorption and increase durability of limestone. Impregnating composition on the basis of calcium polysulfide possesses density of 1.22–1.24 g/cm3, the infiltrant penetrates into the pore structure of limestone to a depth of 4 cm or more, depending on the density and structure of the sample. While the material is drying, sulfur nanoparticles are crystallized from the polysulfide solution in its pores. They partially fill pore space and form protective durable insoluble hydrophobic coating that impedes the penetration of water into the pores of the limestone, but preserves its vapor permeability, which is important for wall and decoration materials. The evaluation of protective coatings was performed with laser particle size analyzer, scanning probe microscope and a diffractometer. It showed that the average size of the particles forming the protective coating is in the range of 20–25 nm, the particles shape is spherical, the particles are elemental sulfur with orthorhombic structure of the crystal lattice. The processing of shell limestone with calcium polysulphide solution provides formation of coating based on nanosized sulfur on the surface of stone pores. The coating partially fills the pore space and, as it is hydrophobic, reduces the water absorption of the samples by a factor of 5–8, increases their average density by 22–27%, strength in 1,2–1,3 times, the softening factor by 6–19%, that makes possible to predict the increase of the durability of building materials based on shell limestone to 1

  7. Salts of the iodine oxyacids in the impregnation of adsorbent charcoal for trapping radioactive methyliodide

    International Nuclear Information System (INIS)

    1980-01-01

    A method of removing methyliodide 131 gas from the effluent of a reactor, comprises passing the effluent gas through a charcoal sorbent formed by first contacting charcoal with a liquid containing a hypoiodite obtained when an aqueous mixture of a first component comprising a salt of an iodine oxyacid selected from periodate, iodate and hypoiodite and a second component selected from iodine and/or an iodide salt is adjusted to a pH of about 10 by the addition of an inorganic base, and then contacting the resulting impregnated charcoal with a tertiary amine. (author)

  8. Chromatographic separations on pyridinium tungstoarsenate-impregnated ion-exchange papers

    International Nuclear Information System (INIS)

    Ion-exchange papers were prepared by impregnating chromatographic Whatman No.3 paper with pyridinium tungstoarsenate exchanger. The composition of the material loaded on the paper shows that the compound has the formula (C 5 H 5 NH) 3 W 12 AsO 40 . Rsub(f) values of 30 metal ions were determined on these ion-exchange papers by developing with ascending technique in solvents containing mixtures of n-propanol and hydrochloric or nitric acid. Several binary, ternary and some quaternary separations were also achieved on these papers. Studies were also made on plain papers for comparison. (author)

  9. Tuberculous Aortic Pseudoaneurysm Treated with In Situ Silver-impregnated Vascular Inlay Graft

    Directory of Open Access Journals (Sweden)

    Hanif Hussein

    2008-04-01

    Full Text Available A 62-year-old man presented with continuous, persistent backache shortly after completion of anti-tuberculosis medication for tuberculosis (TB of the spine. Computed tomography scan revealed a pseudoaneurysm involving the infrarenal aorta. He was restarted on anti-TB medication and underwent repair of the pseudoaneurysm with an in situ silver-coated bifurcated Dacron graft. His postoperative recovery was uneventful and he remained well up to 12 months of follow up. To our knowledge, this is the first case in the literature where an in situ silver-impregnated vascular graft has been successfully used in treating a tuberculous pseudoaneurysm.

  10. Kinetic roughening and pinning of coupled precursor and impregnation fronts in porous media

    International Nuclear Information System (INIS)

    Balankin, Alexander S.; Garcia Paredes, Rafael; Marquez Gonsalez, Jesus; Susarrey Huerta, Orlando; Morales Matamoros, Daniel; Castrejon Vacio, Fernando

    2006-01-01

    In the paper wetting experiments at low evaporation rate, after a short Washburn regime the film flow of filtered water overtakes the main impregnation front. Accordingly, we study the kinetic roughening dynamics and pinning of two strongly coupled fronts moving in different papers. We find that the kinetic roughening dynamics of precursor and main fronts belongs to different universality classes, nevertheless, at the final stage the distance between the fronts decrease until both fronts are pinned in the same configuration z P (x,y), the scaling properties of which are determined by the long-range correlations in the pore network

  11. Elaboration of nickel-impregnated over hexagonal mesoporous materials and their catalytic application

    Directory of Open Access Journals (Sweden)

    M. Laribi

    2016-11-01

    Full Text Available Hexagonal mesoporous silicas with different nickel contents have been synthesized and characterized by several techniques such as N2 physical adsorption, elemental analysis, XRD, TEM and temperature programmed reduction (TPR. In fact, the nickel-impregnated over hexagonal mesoporous silicas showed both high activity and high selectivity for Friedel–Crafts alkylations of benzene with benzyl chloride. The kinetics of the reaction over these catalysts have been investigated and the reaction has been extended to other substrates like toluene, p-xylene, anisole, naphthalene and methylnaphthalene.

  12. Quantitative electrochromatography of uranium and platinum on papers impregnated with thorium and antimony based cation exchanger

    International Nuclear Information System (INIS)

    Misra, A.K.

    1992-01-01

    Electrochromatography of 32 metal ions have been studied on papers impregnated with thorium antimonate cation exchanger in aq. organic acids, aq. nitric acid as well as in EDTA buffers. On the basis of differential migration which depends on the ion exchange properties of thorium antimonate and nature of complexes formed with the electrolytes, some useful qualitative and quantitative separations of synthetic mixtures of metal ions have been achieved. The effect of some other physical parameter has also been discussed. Quantitative separation of platinum and uranium has been developed. (author). 13 refs., 2 figs., 5 tabs

  13. Extraction chromatographic studies of Ti(IV) with Cyanex 301 as impregnant - recovery from red mud

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, B.; Deep, A.; Malik, P.; Rajput, S. [Dept. of Chemistry, Univ. of Roorkee, Roorkee, Uttranchal (India)

    2002-02-01

    A silica gel column impregnated with bis-(2,4,4-trimethylpentyl)dithiophosphinic acid has been studied for the uptake of Ti(IV). Its chemical stability has been examined and its regeneration power checked. The stoichiometry of the extracted species is proposed and the loading capacity of the column material for Ti(IV) assessed. Some important binary separations of Ti(IV) from commonly associated metal ions have been achieved and the column has been used to recover high-purity titanium from red mud, a secondary sector material. (orig.)

  14. Cluster Classification of Partial Discharges in Oil-impregnated Paper Insulation

    Directory of Open Access Journals (Sweden)

    SURESH, S. D. R.

    2010-02-01

    Full Text Available Recognition of multiple partial discharge (PD sources in high voltage equipment has been a challenging task until now. The work reported here, aims to recognize multiple PD sources in oil-impregnated paper using Cluster Analysis (CA and Fuzzy Logic (FL. The typical sources of PD in transformer are identified and the corresponding single source PD defect laboratory models are fabricated. From the measured PD signals, the necessary statistical parameters are extracted by applying CA for classification. A Fuzzy based algorithm has been developed to recognize single source PDs. The developed algorithm has also been applied to recognize multiple PD sources.

  15. Effect of Dipping and Vacuum Impregnation Coating Techniques with Alginate Based Coating on Physical Quality Parameters of Cantaloupe Melon.

    Science.gov (United States)

    Senturk Parreidt, Tugce; Schmid, Markus; Müller, Kajetan

    2018-03-10

    Edible coating based on sodium alginate solution was applied to fresh-cut cantaloupe melon by dipping and vacuum impregnation coating methods. One aim of this work is to produce more technical information concerning these conventional and novel coating processes. For this purpose, the effect of various coating parameters (dipping time, draining time, time length of the vacuum period, vacuum pressure, atmospheric restoration time) with several levels on physical quality parameters (percentage of weight gain, color, and texture) of noncoated and coated samples were determined in order to define adequate coating process parameters to achieve a successful coating application. Additionally, the effects of dipping and vacuum impregnation processes were compared. Both processes improved the firmness of the melon pieces. However, vacuum impregnation application had higher firmness and weight gain results, and had significant effect (P coating technique and the parameters used significantly affect the physical quality characteristics of coated food products. The work presented produced more technical information concerning dipping and vacuum impregnation coating techniques, along with evaluating the effects of various coating parameters with several levels. The results revealed that vacuum impregnation technique is a successful coating method; however the effects should be carefully assessed for each product. © 2018 Institute of Food Technologists®.

  16. Evaluation of Alternative Atomistic Models for the Incipient Growth of ZnO by Atomic Layer Deposition

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Manh-Hung; Tian, Liang; Chaker, Ahmad; Skopin, Evgenii; Cantelli, Valentina; Ouled, Toufik; Boichot, Raphaël; Crisci, Alexandre; Lay, Sabine; Richard, Marie-Ingrid; Thomas, Olivier; Deschanvres, Jean-Luc; Renevier, Hubert; Fong, Dillon; Ciatto, Gianluca

    2017-03-20

    ZnO thin films are interesting for applications in several technological fields, including optoelectronics and renewable energies. Nanodevice applications require controlled synthesis of ZnO structures at nanometer scale, which can be achieved via atomic layer deposition (ALD). However, the mechanisms governing the initial stages of ALD had not been addressed until very recently. Investigations into the initial nucleation and growth as well as the atomic structure of the heterointerface are crucial to optimize the ALD process and understand the structure-property relationships for ZnO. We have used a complementary suite of in situ synchrotron x-ray techniques to investigate both the structural and chemical evolution during ZnO growth by ALD on two different substrates, i.e., SiO2 and Al2O3, which led us to formulate an atomistic model of the incipient growth of ZnO. The model relies on the formation of nanoscale islands of different size and aspect ratio and consequent disorder induced in the Zn neighbors' distribution. However, endorsement of our model requires testing and discussion of possible alternative models which could account for the experimental results. In this work, we review, test, and rule out several alternative models; the results confirm our view of the atomistic mechanisms at play, which influence the overall microstructure and resulting properties of the final thin film.

  17. Civil Procedure.

    Science.gov (United States)

    Byer, Robert

    1997-01-01

    Briefly reviews the historical development of civil procedure (the rules that dictate how a civil case can proceed through the courts) and identifies some of its main components. Discusses procedures such as subject matter jurisdiction, personal jurisdiction, venue, discovery, motions practice, pleadings, pretrial conference, and trials. (MJP)

  18. Evaluation of the mechanical, physical properties and decay resistance of particleboard made from particles impregnated with Pinus brutia bark extractives.

    Science.gov (United States)

    Nemli, Gökay; Gezer, E Derya; Yildiz, Sibel; Temiz, Ali; Aydin, Aytaç

    2006-11-01

    The mechanical, physical properties and decay resistances of particleboard made from particles impregnated with Pinus brutia bark extractives were examined. Properties included were modulus of rupture, modulus of elasticity, internal bond, thickness swelling, and weight loss according to European standards. The results showed that particleboards made from particles impregnated with bark extractives had significantly lower mechanical values than those made from unimpregnated particles. Impregnating wood particles with bark extractives improved the decay resistance and thickness swelling of particleboard. Increasing concentration of the extractives decreased the mechanical properties and improved the thickness swelling and decay resistance of the panels. Particleboards made from 1% P. brutia bark extractives met the specifications for modulus of rupture and internal bond strength for general purposes.

  19. Applicability of Vacuum Impregnation to Modify Physico-Chemical, Sensory and Nutritive Characteristics of Plant Origin Products—A Review

    Science.gov (United States)

    Radziejewska-Kubzdela, Elżbieta; Biegańska-Marecik, Róża; Kidoń, Marcin

    2014-01-01

    Vacuum impregnation is a non-destructive method of introducing a solution with a specific composition to the porous matrices of fruit and vegetables. Mass transfer in this process is a result of mechanically induced differences in pressure. Vacuum impregnation makes it possible to fill large volumes of intercellular spaces in tissues of fruit and vegetables, thus modifying physico-chemical properties and sensory attributes of products. This method may be used, e.g., to reduce pH and water activity of the product, change its thermal properties, improve texture, color, taste and aroma. Additionally, bioactive compounds may be introduced together with impregnating solutions, thus improving health-promoting properties of the product or facilitating production of functional food. PMID:25244012

  20. Synthesis of K2O/Zeolite catalysts by KOH impregnation for biodiesel production from waste frying oil

    Science.gov (United States)

    Fitriana, N.; Husin, H.; Yanti, D.; Pontas, K.; Alam, P. N.; Ridho, M.; Iskandar

    2018-03-01

    K2O/Zeolite compounds were successfully synthesized using KOH as starting material and natural zeolite as support. The catalysts were calcined at 500°C for 3 h and then characterized by X-Ray Diffractometer (XRD) and Scanning Electron Microscopy (SEM). The SEM images reveal that the zeolite and K2O/zeolite particles are irregular in shape (100 to 400 nm). The independent variables were impregnated amounts of KOH (15 - 25%), catalyst to oil ratios of 1.0 - 6.0 wt.%, and reaction time of 2 h. The highest biodiesel yield of 95% was produced from the reaction with 2.1 wt.% catalyst of 25% KOH impregnated. The properties of produced biodiesel complied with SNI. The catalytic stability test showed that the 25% KOH impregnated catalyst was stable.

  1. Analysis on the thermal and electrical characteristics of impregnating materials for the bifilar winding-type superconducting fault current limiter

    Science.gov (United States)

    Yang, Seong Eun; Bae, Duck Kweon; Yoon, Kyung Yong; Yoon, Yong Soo; Ko, Tae Kuk; Kim, Sang-Hyun

    2006-05-01

    The resistive type high temperature superconducting fault current limiter (HTSFCL) limits the fault current with the resistance that generated by fault current. The generated resistance by fault current makes large pulse power which makes the operation of HTSFCL unstable. So, the cryogenic cooling system of the resistive type HTSFCL must diffuse and eliminate the pulse energy very quickly. Although the best way is to make wide direct contact area between HTS winding and coolant as much as possible, HTS winding also need the impregnation layer which fixes and protects it from electromagnetic force. This paper deals with thermal conductivity and dielectric strength of some epoxy compounds for the impregnation of high temperature superconducting (HTS) winding at 77 K. The measured data can be used in the optimal design of impregnation for HTS winding. Aluminar filling increased the thermal conductivity of epoxy compounds. Hardener also affected the thermal conductivity and the dielectric strength of epoxy compounds.

  2. Carbon dioxide adsorption on polyacrylamide-impregnated silica gel and breakthrough modeling

    Science.gov (United States)

    Zhao, Yi; Shen, Yanmei; Bai, Lu; Ni, Shiqing

    2012-11-01

    Polyacrylamide-impregnated silica gel was prepared to capture CO2 from flue gas. The polymerization of acrylamide was carried out in AN solvent using AIBN as initiator and EGDMA as crosslinker. The adsorbents were characterized by N2 adsorption, FTIR analysis, SEM analysis, and thermal gravimetric analysis. The results showed that the polymer was not only occupying the porosity of the silica, but necessarily surrounding silica particles, and the amide groups was successfully loaded on the support silica. The impregnated silica displayed good thermal-stability at 250 °C. The CO2 adsorption isotherms were measured to examine CO2 adsorption on adsorbents, and the results showed that the capacity was increased significantly after modification. The CO2 isosteric adsorption heats calculated from the isotherms showed that the adsorption interaction of CO2 with the functionalized material may be mainly an intermolecular force or hydrogen bond. Fixed-bed breakthrough model of CO2 adsorption on functionalized silica was successfully developed to describe the breakthrough curves under different adsorption temperature, CO2 concentration, and gas flow rate. The mass transfer coefficients of CO2 were calculated from the breakthrough model, the results showed that adsorption rate could be promoted by increasing temperature, flow rate and CO2 concentration, among which the effect of gas flow rate is the most obvious.

  3. Carbon Dioxide Capture by Deep Eutectic Solvent Impregnated Sea Mango Activated Carbon

    Science.gov (United States)

    Zulkurnai, N. Z.; Ali, U. F. Md.; Ibrahim, N.; Manan, N. S. Abdul

    2018-03-01

    The increment amount of the CO2 emission by years has become a major concern worldwide due to the global warming issue. However, the influence modification of activated carbon (AC) has given a huge revolution in CO2 adsorption capture compare to the unmodified AC. In the present study, the Deep Eutectic Solvent (DES) modified surface AC was used for Carbon Dioxide (CO2) capture in the fixed-bed column. The AC underwent pre-carbonization and carbonization processes at 519.8 °C, respectively, with flowing of CO2 gas and then followed by impregnation with 53.75% phosphoric acid (H3PO4) at 1:2 precursor-to-activant ratios. The prepared AC known as sea mango activated carbon (SMAC) was impregnated with DES at 1:2 solid-to-liquid ratio. The DES is composing of choline chloride and urea with ratio 1:2 choline chloride to urea. The optimum adsorption capacity of SMAC was 33.46 mgco2/gsol and 39.40 mgco2/gsol for DES modified AC (DESAC).

  4. Fixation of aqueous tritiated waste in polymer impregnated concrete and in polyacetylene

    International Nuclear Information System (INIS)

    Colombo, P.; Neilson, R. Jr.; Steinberg, M.

    1976-01-01

    Tritiated aqueous waste can be used to hydrate hydraulic cement producing a concrete that contains a network of interconnected porosity and as such is subject to water intrusion and subsequent tritium loss by leaching and exchange. Techniques have been developed to impregnate this porosity with styrene monomer, which is then polymerized in situ, resulting in a concrete that is essentially impermeable while its strength, durability, and resistance to chemical attack are significantly improved. An adsorbent additive can be incorporated to increase the tritiated waste loading of the concrete. Tritiated aqueous waste can also be fixed in polymeric form through reaction with calcium carbide to form tritiated acetylene and calcium hydroxide. Polymerization of the acetylene is accomplished by either 60 Co γ-irradiation or thermal catalysis over cupric oxide. The tritiated polyacetylene produced can contain up to 50 at.% tritium and is essentially nonleachable, insoluble, thermally stable up to 325 0 C, and chemically inert. Tritiated polyacetylene can be incorporated as an aggregate in concrete, polymer concrete (PC), or polymer impregnated concrete (PIC) to form a monolithic solid. The tritiated calcium hydroxide formed in the calcium carbide-water reaction may be calcined, with the recovered tritiated water recycled, or incorporated directly into PC or PIC to impede tritium release

  5. Antibiotic-Impregnated Central Venous Catheters Do Not Change Antibiotic Resistance Patterns.

    Science.gov (United States)

    Turnbull, Isaiah R; Buckman, Sara A; Horn, Christopher B; Bochicchio, Grant V; Mazuski, John E

    2018-01-01

    Antibiotic-impregnated central venous catheters (CVCs) decrease the incidence of infection in high-risk patients. However, use of these catheters carries the hypothetical risk of inducing antibiotic resistance. We hypothesized that routine use of minocycline and rifampin-impregnated catheters (MR-CVC) in a single intensive care unit (ICU) would change the resistance profile for Staphylococcus aureus. We reviewed antibiotic susceptibilities of S. aureus isolates obtained from blood cultures in a large urban teaching hospital from 2002-2015. Resistance patterns were compared before and after implementation of MR-CVC use in the surgical ICU (SICU) in August 2006. We also compared resistance patterns of S. aureus obtained in other ICUs and in non-ICU patients, in whom MR-CVCs were not used. Data for rifampin, oxacillin, and clindamycin were available for 9,703 cultures; tetracycline resistance data were available for 4,627 cultures. After implementation of MR-CVC use in the SICU, rifampin resistance remained unchanged, with rates the same as in other ICU and non-ICU populations (3%). After six years of use of MR-CVCs in the SICU, the rate of tetracycline resistance was unchanged in all facilities (1%-3%). The use of MR-CVCs was not associated with any change in S. aureus oxacillin-resistance rates in the SICU (66% vs. 60%). However, there was a significant decrease in S. aureus clindamycin resistance (59% vs. 34%; p resistance of S. aureus isolates to rifampin or tetracyclines.

  6. Preparation, characterization and antimicrobial study of a hydrogel (soft contact lens) material impregnated with silver nanoparticles.

    Science.gov (United States)

    Fazly Bazzaz, Bibi Sedigheh; Khameneh, Bahman; Jalili-Behabadi, Mohammad-mehdi; Malaekeh-Nikouei, Bizhan; Mohajeri, Seyed Ahmad

    2014-06-01

    Contact lenses that incorporate antimicrobial properties may reduce the risk for microbial-associated adverse events for lens wearers. The aim of this study was to assess the antimicrobial effects of silver nanoparticles (NP) when impregnated in a hydrogel material. Hydrogel disks, used as a proxy for soft contact lenses, were prepared with silver NPs to add an antimicrobial effect to the polymer. Six groups of disks were created, each with a different concentration of silver NPs. The antimicrobial effect of the hydrogels against Pseudomonas aeruginosa (ATCC15442) and Staphylococcus aureus (ATCC6538) was evaluated at 6, 24, 48 and 72 h. Silver NP concentrations ranged from 20.71 to 98.06 μg/disk. All groups demonstrated excellent antibacterial effects against P. aeruginosa at each time point. After 6h all disks didn't exhibit desirable antibacterial activity against S. aureus; whereas except those with 20.71 μg silver NPs showed antibacterial activity at 24h and only the disks with 57.13 and 98.06 μg silver NPs showed antimicrobial activity at 48 and 72 h. The development of contact lenses made of a silver NP-impregnated hydrogel material may bring antimicrobial effects sufficient to decrease the risk of microbial-related adverse events for lens wearers. Copyright © 2013 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  7. Electron microscopy studies of natural and synthetic zeolites impregnated with uranyl dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Acosta, Dwight R.; T-Olguin, Maria; Solache, Marcos; Bosch, Pedro; Bulbulian, Silvia [Universidad Nacional Autonoma de Mexico, Mexico City (Mexico). Inst. de Fisica; Asomoza, Max [Instituto Nacional de Investigaciones Nucleares, Mexico City (Mexico). Dept. de Quimica Nuclear

    1995-09-01

    Full text. The use of Y zeolite and erionite to remove uranyl dioxide ions from aqueous solution is focussed on catalysis and energy transfer problems but it can be oriented to recovery uranyl dioxide ions, among other radioactive compounds. The samples impregnated with uranyl dioxide at several concentrations and contact times were studied using conventional, high resolution and scanning electron microscopy in order to detect changes as consequence of contact with a radioactive material and to verify mechanical stability of zeolites. Also X ray diffraction, thermal analysis, neutron activation were used to characterize the samples at several steps of treatment. The crystallinity of zeolites was maintained only when using dilute uranyl nitrate solution (up to 0.0100 N for y zeolite and 0.0300 N for erionite). The samples impregnated with highest nitrate concentrations partially lost their crystallinity. From selected area electron diffraction pattern, lattice parameter variations were detected and from high resolution electron microscopy localization of uranyl ions in and on zeolite structure was determined. Surface modification in zeolites was observed by scanning electron microscopy just for samples with long contact time with radioactive solutions. (author)

  8. Study of building materials impregnation processes by quasi-real-time neutron radiography

    Science.gov (United States)

    Nemec, T.; Rant, J.; Apih, V.; Glumac, B.

    1999-11-01

    Neutron radiography (NR) is a useful non-destructive method for determination of hydrogen content in various building and technical materials. Monitoring of transport processes of moisture and hydrogenous liquids in porous building materials is enabled by fast, quasi-real-time NR methods based on novel imaging plate neutron detectors (IP-NDs). Hydrogen content in the samples is determined by quantitative analysis of measured profiles of neutron attenuation in the samples. Detailed description of quantitative NR method is presented by the authors in another accompanying contribution at this conference. Deterioration of building materials is originated by different processes that all require presence of water therefore it is essential to limit or prevent the transport of water through the porous material. In this presentation, results of a study of clay brick impregnation by silicone based hydrophobic agents will be presented. Quantitative results obtained by NR imaging successfully explained the processes that occur during the impregnation of porous materials. Efficiency of hydrophobic treatment was quantitatively evaluated.

  9. Separation of Technetium in Nitric Acid Solution With an Extractant Impregnated Resin

    International Nuclear Information System (INIS)

    Jei Kwon Moon; Eil Hee Lee; Chong-Hun Jung; Byung Chul Lee

    2006-01-01

    An extractant impregnated resin (EIR) was prepared by impregnation of Aliquat 336 into Amberlite XAD-4 for separation of technetium from rhodium in nitric acid solution. The prepared EIR showed high preference for rhenium (chemical analogue of technetium) over rhodium. The adsorption isotherms for rhenium were described well by Langmuir equation in both the single and multi-component systems. Maximum adsorption capacities obtained by modelling the isotherms of rhenium were 2.01 meq g -1 and 1.97 meq g -1 for the single and the multi-component systems, respectively. Column tests were also performed to confirm the separation efficiency of rhenium using a jacketed glass column (diam. 11 x L 150). The EIR column showed successful separation of rhenium with the breakthrough volume of about 122 BV for the breakthrough concentration of 0.08. Also the breakthrough data were modelled successfully by assuming a homogeneous diffusion model in the particle phase. The diffusivities obtained from the modelling were in the order of 10 -7 cm 2 min -1 for a rhenium. The rhenium adsorbed on the bed could be eluted with a high purity by using a nitric acid solution. (authors)

  10. Laboratory investigations of insecticide impregnated materials for the control of New World screwworm flies

    International Nuclear Information System (INIS)

    Harris, E.G.; Brown, M.; Smith, S.

    1992-01-01

    In laboratory tests, New World screwworm flies were found to be at least three orders of magnitude less susceptible to the insecticides deltamethrin, alphacypermethrin and cyfluthrin than are tsetse flies. Deltamethrin was the most toxic of the three insecticides to screwworm flies. For topical application, the LD50s for deltamethrin 20% suspension concentrate were 33 ng and 25 ng for male and female screwworm flies respectively, compared with 0.04 ng for tsetse, G.m. morsitans. In various tests simulating contact of screwworm flies with cloth or netting targets impregnated with insecticide, 100% kill was only achieved with 3.2% deltamethrin and contact times of at least 10 sec, although 100% knockdown for up to 24 hours was obtained with lower concentrations. No repellent effect was observed at the higher concentrations. Cloth targets impregnated with a high dose of insecticide and baited with an attractant could be effective against NWS flies, especially if after ''knockdown'' flies are removed by predators. 1 fig., 9 tabs

  11. Antimicrobial properties of acrylic resins for dentures impregnated with silver nanoparticles

    Directory of Open Access Journals (Sweden)

    Gligorijević Nikola

    2017-01-01

    Full Text Available Introduction. Porosity and surface adherence of acrylates make them collectors of infectious content from the mouth. This applies particularly to cold-curable acrylates, whose structure is less compact. The aim of this study was to investigate the antimicrobial effects of cold polymerized dental acrylics after impregnation with silver nanoparticles. Material and Methods. Different concentrations (2%, 5% and 10% of silver nanoparticles were added to the polymer components (powder of cold polymerizing acrylate, after which disk-shaped samples, 10 mm, in diameter, were made. A disk of silver nanoparticles was used as a control for our study. Antimicrobial activity was investigated using the disc diffusion method on the two most common oral cavity infecting agents - Gram positive bacterium, Staphylococcus aureus ATCC 25923, and fungus Candida albicans ATCC 2091. The results have shown that the control sample as well as the samples of silver impregnated acrylics resins exhibit antibacterial activity. The growth zone inhibition of Staphylococcus aureus in the culture medium is proportional to the concentration of silver nanoparticles in the cold curing acrylic resin. On the other hand, the test samples did not inhibit the growth of Candida albicans in the medium. Conclusion. Silver nanoparticles in cold curing acrylic resin demonstrated antibacterial activity. Expanding their antimicrobial spectrum of activity and their potential clinical application will be the subject of the future research.

  12. High-efficiency technology for lithium isotope separation using an ionic-liquid impregnated organic membrane

    International Nuclear Information System (INIS)

    Hoshino, Tsuyoshi; Terai, Takayuki

    2011-01-01

    The tritium needed as a fuel for fusion reactors is produced by the neutron capture reaction of lithium-6 ( 6 Li) in tritium breeding materials. New lithium isotope separation technique using ionic-liquid impregnated organic membranes (Ionic-Liquid-i-OMs) have been developed. Lithium ions are able to move by electrodialysis through certain Ionic-Liquid-i-OMs between the cathode and the anode in lithium solutions. In this report, the effects of protection cover and membrane thickness on the durability of membrane and the efficiency of isotope separation were evaluated. In order to improve the durability of the Ionic-Liquid-i-OM, we developed highly-durable Ionic-Liquid-i-OM. Both surfaces of the Ionic-Liquid-i-OM were covered by a nafion 324 overcoat or a cation exchange membrane (SELEMION TM CMD) to prevent the outflow of the ionic liquid. It was observed that the durability of the Ionic-Liquid-i-OM was improved by a nafion 324 overcoat. On the other hand, the organic membrane selected was 1, 2 or 3 mm highly-porous Teflon film, in order to efficiently impregnate the ionic liquid. The 6 Li isotope separation factor by electrodialysis using highly-porous Teflon film of 3 mm thickness was larger than using that of 1 or 2 mm thickness.

  13. Perfluoropolyether-Impregnated Mesoporous Alumina Composites Overcome the Dewetting-Tribological Properties Trade-Off.

    Science.gov (United States)

    Rowthu, Sriharitha; Hoffmann, Patrik

    2018-03-28

    Conventional omniphobic surfaces suffer from wear-sensitivity due to soft apolar coatings or substrates and protruding surface features that are eroded even for mild abrasion treatments, leading to the loss of dewetting properties after wear. Evidently, there was a trade-off between dewetting and tribological properties. Here, we show the establishment of self-healing slippery properties post severe abrasion by utilizing perfluoropolyether-impregnated mesoporous Al 2 O 3 (MPA) composites. The hard polar alumina matrix provides the optimal tribological properties, and the liquid lubricant in the porous network contributes to both tribological and self-healing dewetting properties. These composites sustained normal pressures up to 350 MPa during reciprocating sliding contacts. The severely abraded surfaces are capable of self-replenishing in ambient environment, driven by capillarity and surface diffusion processes, and regained their slippery properties toward water and hexadecane after 15 h of self-healing. Eventually, a dewetting-tribology diagram has been introduced to show different regimes, namely-optimal slippery properties, optimal tribological properties, and a mixed regime). We found out that the microstructural expression [Formula: see text] is a robust guiding tool to predict the regime of interest. This dewetting-tribological diagram may be marked as an inception to designing abrasion-resistant slippery liquid impregnated composites for overcoming the dewetting tribological properties trade-off. Such surfaces may potentially find applications in paint industries and as anti-icing surfaces.

  14. Mechanical properties of composites made of hybrid fabric impregnated with silica nanoparticles and epoxy resin

    Science.gov (United States)

    Kordani, N.; Alizadeh, M.; Lohrasby, F.; Khajavi, R.; Baharvandi, H. R.; Rezanejad, M.; Ahmadzadeh, M.

    2017-09-01

    In this study, the mechanical properties of composites will be examined which were made from Kenaf and hybrid fabric with a simple structure that was coated with epoxy resin and nano silica particles. This fabric cotton has a different situation in terms of yarn score and the type of fiber that is used in textiles. Nano silica particles of 200 nm, polyethylene glycol with 200 molecular weights and ethanol with mechanical weight molecular with ratio of 6:1 will be mixed. Suspension of 60% was chosen according to the silica particles. The D6264 standard test for concentrated force was carried out through the cone edge to determine the strength of each of the samples. Increasing of resistance against penetration in the Kenaf samples from the raw until impregnated with the shear thickening fluid is less than the hybrid samples. Slippage of the fibers with the change of round edge indenter to cone edge indenter has changed. Penetration by cone edge to the cloth is done with lower force and it shows the effect of slippage of fibers on the resistance of the penetration. Samples impregnated with the shear thickening fluid in comparison with epoxy resin have lower resistance. Slippage of natural fibers in comparison with synthetic fibers is lower and on the other hand the average of friction between fibers in the natural fibers is more than synthetic fibers.

  15. Inhibition of bacterial growth by tetracycline-impregnated enamel and dentin.

    Science.gov (United States)

    Bjorvatn, K; Skaug, N; Selvig, K A

    1984-12-01

    Tetracyclines can react with enamel and dentin to form relatively insoluble fluorescent compounds. The purpose of this study was to evaluate the possible antimicrobial effect of these reaction products on various microorganisms associated with human dental plaque and periodontal disease. Slabs of native dentin and enamel as well as demineralized dentin were immersed in aqueous solutions of tetracycline HCl, oxytetracycline HCl and doxycycline HCl for periods of 1 h or 24 h. Unimpregnated enamel and dentin slabs sterilized by gamma irradiation and specimens impregnated with phenoxymethylpenicillin calcium were used as controls. Test and control specimens were placed on agar plates seeded with B. cereus, C. ochraceus, S. sanguis, F. nucleatum, B. melaninogenicus or A. viscosus and were subsequently incubated aerobically or anaerobically at 37 degrees C. With the exception of enamel impregnated for 1 h in a 0.01 mg/ml tetracycline solution, all test specimens caused growth inhibition zones, varying in size according to concentration of the drug, immersion period and bacterial species. The results indicate that tetracyclines react with enamel and dentin to form slightly soluble compounds with a pronounced antibacterial effect. In comparison, the antimicrobial effect of dentin treated with penicillin was small.

  16. Effects of a stannous fluoride-impregnated dental floss on in vivo salivary fluoride levels.

    Science.gov (United States)

    Flatt, Casey C; Warren-Morris, Donna; Turner, Steward D; Chan, Jarvis T

    2008-01-01

    The aim of this in vivo pilot study was to determine the concentration of fluoride retained intra-orally in saliva after flossing with dental floss impregnated with stannous fluoride (SnF(2)). Participants flossed their teeth ad libitum with 2 premeasured lengths of fluoridated dental floss. Expectorated saliva samples were collected in vials before flossing (PF), immediately postflossing(IPF), at 30 minutes (30), and 1 hour (60) after flossing for analysis with a fluoride-specific electrode and an Orion millivoltmeter. Postflossing samples were compared to the preflossing samples using ANOVA and Tukey's HSD. Differences between the PF and IPF group means were found to be statistically significant at pflossing (PF). It can be concluded that fluoride can be released from flossing with the tested SnF(2)-impregnated dental floss elevating salivary fluoride levels for at least 30 minutes. Use of this fluoride-containing dental floss offers an option for delivery of fluoride to individuals at risk for dental caries.

  17. Rapid measurement of radiocesium in water using a Prussian blue impregnated nonwoven fabric

    International Nuclear Information System (INIS)

    Yasutaka, Tetsuo; Kawamoto, Tohru; Kawabe, Yoshishige; Komai, Takeshi; Sato, Toshio; Sato, Mutsuto; Suzuki, Yasukazu; Nakamura, Kimihito

    2013-01-01

    We developed a rapid method for concentrating and measuring radiocesium ( 134 Cs and 137 Cs) dissolved in fresh water using nonwoven fabric impregnated with Prussian blue (PB) as a radiocesium absorber in combination with gamma-ray spectrometry using a germanium (Ge) detector. Utilizing this method, dissolved radiocesium in a 20-100 L freshwater sample could be concentrated within a period of 20-60 min by passing the sample through 10-12 columns, connected in series, that had been fitted with nonwoven fabric disks impregnated with PB. Laboratory tests using water samples containing known amounts of radiocesium confirmed that the overall recovery rate of the isotope was 100%-108%, and that the first six columns recovered 84%-97% of the isotope. The detection limit of this method was determined to be 0.002 Bq/L with a sample of 100 L and measurement time of 43,200 s. In comparison with traditional methods using ion-exchange resin, co-precipitation with ammonium phosphomolybdate, etc., our method has the advantages of reduced cost and a significantly shorter concentration time. Since water samples can be treated in short periods of time, it is now possible to conduct radiocesium pre-concentration in situ, thus eliminating the need to transport large-volume water samples to laboratories. (author)

  18. Temperature Distribution in Fibre-glass Composite Impregnated with Epoxy-Cyanate ester Blend

    Directory of Open Access Journals (Sweden)

    Priyanka Brahmbhatt

    2014-01-01

    Full Text Available Cyanate ester and epoxy blends have been identified as an attractive insulating material for fusion grade magnet winding packs. An insulation system comprising of fibre glass composites and cyanate ester and blend has been analyzed during its vacuum pressure impregnation and curing. The transient one dimensional distribution of temperature and extent of cure has been evaluated both analytically and experimentally in this paper. The one dimensional transient (1-D heat transfer characteristics evaluation has been carried out on 60:40 (epoxy : cyanate which has been optimally prescribed blend for fusion grade winding process. The analytical formulation solves the heat transfer differential equations incorporating internal heat generation resulting from the exothermic chemical reaction in both chemical and diffusional kinetic regimes. In support to the analytical formulation, carefully designed experiments have been carried out on such samples. On comparing the results obtained from analytical formulism and those measured during experiments have been found to be matching well. These results have the potential to design the vacuum pressure impregnation of large size fusion relevant winding packs.

  19. Photodigitizing procedures

    Science.gov (United States)

    Kilgore, P. D.; Gottbrath, J. H.

    1984-02-01

    This report documents procedures and programs for efficiently running the Photo Digitizing System at the Naval Biodynamics Laboratory. Procedures have been tested and have been found to be effective. Any future acquisitions of programs or changes to current programs should be incorporated in these procedures. On-going research programs use high speed instrumentation cameras to record the motion of test subjects during biodynamic experiments. The films are digitized and the 3-dimensional motion is reconstructed and analyzed. Experimental research is performed to determine the effects of aircraft crashes, ship motion, vibration, aircraft ejection and parachute opening forces on the health and performance of Navy personnel.

  20. Oculoplastic procedures

    Science.gov (United States)

    ... procedures may be done on the: Eyelids Eye sockets Eyebrows Cheeks Tear ducts Face or forehead These ... eyes. These lenses help protect your eyes and shield them from the bright lights of the surgical ...

  1. Hypertension and hyperglycemia synergize to cause incipient renal tubular alterations resulting in increased NGAL urinary excretion in rats.

    Directory of Open Access Journals (Sweden)

    Ana M Blázquez-Medela

    Full Text Available Hypertension and diabetes are the two leading causes of chronic kidney disease (CKD eventually leading to end stage renal disease (ESRD and the need of renal replacement therapy. Mortality among CKD and ESRD patients is high, mostly due to cardiovascular events. New early markers of risk are necessary to better anticipate the course of the disease, to detect the renal affection of additive risk factors, and to appropriately handle patients in a pre-emptive and personalized manner.Renal function and NGAL urinary excretion was monitored in rats with spontaneous (SHR or L-NAME induced hypertension rendered hyperglycemic (or not as controls.Combination of hypertension and hyperglycemia (but not each of these factors independently causes an increased urinary excretion of neutrophil gelatinase-associated lipocalin (NGAL in the rat, in the absence of signs of renal damage. Increased NGAL excretion is observed in diabetic animals with two independent models of hypertension. Elevated urinary NGAL results from a specific alteration in its tubular handling, rather than from an increase in its renal expression. In fact, when kidneys of hyperglycaemic-hypertensive rats are perfused in situ with Krebs-dextran solution containing exogenous NGAL, they excrete more NGAL in the urine than hypertensive rats. We also show that albuminuria is not capable of detecting the additive effect posed by the coexistence of these two risk factors.Our results suggest that accumulation of hypertension and hyperglycemia induces an incipient and quite specific alteration in the tubular handling of NGAL resulting in its increased urinary excretion.

  2. In situ measurement of soil moisture and pore-water pressures in an 'incipient' landslide: Lake Tutira, New Zealand.

    Science.gov (United States)

    Hawke, Richard; McConchie, Jack

    2011-02-01

    The immediate cost of shallow regolith landslides in New Zealand has been estimated to exceed US$33M annually. Since the majority of these landslides occur during prolonged wet conditions, or intense rainstorms, moisture conditions are a critical control. The nature, dynamics, and character of soil moisture conditions, and the piezometric response to rainfall, have been recorded within an 'incipient' landslide for more than 5 years. The study site, on pastoral hill country within the Lake Tutira catchment in northern Hawkes Bay, is typical of large areas of New Zealand episodically affected by extensive landsliding. Detailed continuous measurements show that both the soil moisture and piezometric response within the regolith are highly storm- and site-specific. The development of positive pore pressures is infrequent; they form only during intense rainstorms, and persist for a short time. The hydraulic response of the soil is primarily a function of storm characteristics, but this response can be modified by antecedent moisture conditions, topographic position, and heterogeneity of soil properties. Stability analysis shows that most slopes in the study area are significantly steeper than can be explained by the frictional strength of the regolith. Measured hydraulic conditions also show that positive pore-water pressures alone do not trigger slope instability. A recent slope failure followed a period of extremely high antecedent moisture conditions, and occurred when maximum soil moisture conditions, though not pore-water pressures, were recorded. Increased moisture content of the regolith reduces matric tension, and therefore effective cohesion of the soil. This cohesion is critical to maintaining stability of the regolith on these slopes. Copyright © 2009 Elsevier Ltd. All rights reserved.

  3. Fault Growth and Propagation and its Effect on Surficial Processes within the Incipient Okavango Rift Zone, Northwest Botswana, Africa (Invited)

    Science.gov (United States)

    Atekwana, E. A.

    2010-12-01

    The Okavango Rift Zone (ORZ) is suggested to be a zone of incipient continental rifting occuring at the distal end of the southwestern branch of the East African Rift System (EARS), therefore providing a unique opportunity to investigate neotectonic processes during the early stages of rifting. We used geophysical (aeromagnetic, magnetotelluric), Shuttle Radar Tomography Mission, Digital Elevation Model (SRTM-DEM), and sedimentological data to characterize the growth and propagation of faults associated with continental extension in the ORZ, and to elucidate the interplay between neotectonics and surficial processes. The results suggest that: (1) fault growth occurs by along axis linkage of fault segments, (2) an immature border fault is developing through the process of “Fault Piracy” by fault-linkages between major fault systems, (3) significant discrepancies exits between the height of fault scarps and the throws across the faults compared to their lengths in the basement, (4) utilization of preexisting zones of weakness allowed the development of very long faults (> 25-100 km) at a very early stage of continental rifting, explaining the apparent paradox between the fault length versus throw for this young rift, (5) active faults are characterized by conductive anomalies resulting from fluids, whereas, inactive faults show no conductivity anomaly; and 6) sedimentlogical data reveal a major perturbation in lake sedimentation between 41 ka and 27 ka. The sedimentation perturbation is attributed to faulting associated with the rifting and may have resulted in the alteration of hydrology forming the modern day Okavango delta. We infer that this time period may represent the age of the latest rift reactivation and fault growth and propagation within the ORZ.

  4. Incipient Domestication Processes in Multicultural Contexts: A Case Study of Urban Parks in San Carlos de Bariloche (Argentina

    Directory of Open Access Journals (Sweden)

    Romina Betancurt

    2017-12-01

    urban parks are constructed cultural niches which, as in an agroforestry system, are scenarios which reveal processes of incipient domestication that reflect different cosmovisions and drivers typical of multicultural contexts.

  5. An underdamped stochastic resonance method with stable-state matching for incipient fault diagnosis of rolling element bearings

    Science.gov (United States)

    Lei, Yaguo; Qiao, Zijian; Xu, Xuefang; Lin, Jing; Niu, Shantao

    2017-09-01

    Most traditional overdamped monostable, bistable and even tristable stochastic resonance (SR) methods have three shortcomings in weak characteristic extraction: (1) their potential structures characterized by single stable-state type are insufficient to match with the complicated and diverse mechanical vibration signals; (2) they vulnerably suffer the interference from multiscale noise and largely depend on the help of highpass filters whose parameters are selected subjectively, probably resulting in false detection; and (3) their rescaling factors are fixed as constants generally, thereby ignoring the synergistic effect among vibration signals, potential structures and rescaling factors. These three shortcomings have limited the enhancement ability of SR. To explore the SR potential, this paper initially investigates the SR in a multistable system by calculating its output spectral amplification, further analyzes its output frequency response numerically, then examines the effect of both damping and rescaling factors on output responses and finally presents a promising underdamped SR method with stable-state matching for incipient bearing fault diagnosis. This method has three advantages: (1) the diversity of stable-state types in a multistable potential makes it easy to match with various vibration signals; (2) the underdamped multistable SR, equivalent to a moving nonlinear bandpass filter that is dependent on the rescaling factors, is able to suppress the multiscale noise; and (3) the synergistic effect among vibration signals, potential structures and rescaling and damping factors is achieved using quantum genetic algorithms whose fitness functions are new weighted signal-to-noise ratio (WSNR) instead of SNR. Therefore, the proposed method is expected to possess good enhancement ability. Simulated and experimental data of rolling element bearings demonstrate its effectiveness. The comparison results show that the proposed method is able to obtain higher

  6. Pattern of genetic differentiation of an incipient speciation process: The case of the high Andean killifish Orestias.

    Science.gov (United States)

    Guerrero-Jiménez, Claudia Jimena; Peña, Fabiola; Morales, Pamela; Méndez, Marco; Sallaberry, Michel; Vila, Irma; Poulin, Elie

    2017-01-01

    During the Pleistocene and Holocene, the southwest Andean Altiplano (17°-22°S) was affected by repeated fluctuations in water levels, high volcanic activity and major tectonic movements. In the early Holocene the humid Tauca phase shifted to the arid conditions that have lasted until the present, producing endorheic rivers, lakes, lagoons and wetlands. The endemic fish Orestias (Cyprinodontidae) represents a good model to observe the genetic differentiation that characterizes an incipient speciation process in allopatry since the morphospecies described inhabit a restricted geographic area, with present habitat fragmentation. The genetic diversity and population structure of four endemic morphospecies of Orestias (Cyprinodontidae) found in the Lauca National Park (LNP) analyzed with mitochondrial markers (Control Region) and eight microsatellites, revealed the existence of genetic groups that matches the fragmentation of these systems. High values of genetic and phylogeographic differentiation indices were observed between Chungará Lake and Piacota lagoon. The group composed of the Lauca River, Copapujo and Chuviri wetlands sampling sites showed a clear signal of expansion, with a star-like haplotype network. Levels of genetic differentiation were lower than in Chungará and Piacota, suggesting that these localities would have differentiated after the bottlenecks linked to the collapse of Parinacota volcano. The Parinacota sample showed a population signal that differed from the other localities revealing greater genetic diversity and a disperse network, presenting haplotypes shared with other LNP localities. A mixing pattern of the different genetic groups was evident using the microsatellite markers. The chronology of the vicariance events in LNP may indicate that the partition process of the Orestias populations was gradual. Considering this, and in view of the genetic results, we may conclude that the morphospecies from LNP are populations in ongoing

  7. Thermal hydraulic conditions inducing incipient cracking in the 900 MWe unit 93 D reactor coolant pump shafts

    International Nuclear Information System (INIS)

    Bore, C.

    1995-01-01

    From 1987, 900 MWe plant operating feedback revealed cracking in the lower part of the reactor coolant pump shafts, beneath the thermal ring. Metallurgical examinations established that this was due to a thermal fatigue phenomenon known as thermal crazing, occurring after a large number of cycles. Analysis of thermal hydraulic conditions initiating the cracks does not allow exact quantification of the thermal load inducing cracking. Only qualitative analyses are thus possible, the first of which, undertaken by the pump manufacturer, Jeumont Industrie, showed that the cracks could not be due to the major transients (stop-start, injection cut-off), which were too few in number. Another explanation was then put forward: the thermal ring, shrunk onto the shaft it is required to protect against thermal shocks, loosens to allow an alternating downflow of cold water from the shaft seals and an upflow of hot water from the primary system. However, approximate calculations showed that the flow involved would be too slight to initiate the cracking observed. A more stringent analysis undertaken with the 2D flow analysis code MELODIE subsequently refuted the possibility of alternating flows beneath the ring establishing that only a hot water upflow occurred due to a 'viscosity pump' phenomenon. Crack initiation was finally considered to be due to flowrate variations beneath the ring, with the associated temperature fluctuations. This flowrate fluctuation could be due to an unidentified transient phenomenon or to a variation in pump operating conditions. This analysis of the hydraulic conditions initiating the cracks disregards shaft surface residual stresses. These are tensile stresses and show that loads less penalizing than those initially retained could cause incipient cracking. Thermal ring modifications to reduce these risks were proposed and implemented. In addition, final metallurgical treatment of the shafts was altered and implemented. In addition, final metallurgical

  8. Experimental-theoretical approach to carbon monoxide density calculation at the incipient stage of the fire indoors

    Science.gov (United States)

    Puzach, S. V.; Suleykin, E. V.; Akperov, R. G.; Nguyen, T. D.

    2017-11-01

    A new experimental-theoretical approach to the toxic gases concentrations assessment in case of fire indoors is offered. The analytical formulas for calculation of CO average volume density are received. These formulas do not contain the geometrical sizes of the room and surfaces dimensions of combustible materials and, therefore, are valid under conditions of as a small-scale fire as a large-scale fire. A small-scale experimental installation for modeling fire thermal and gas dynamics in the closed or open thermodynamic system has been designed. The results of the experiments on determining dependencies of CO average volume density from average volume temperature and oxygen average volume density as well as dependencies of specific coefficients of CO emission and specific mass rates of the combustible material gasification from the time of tests during the burning of wood, transformer oil and PVC cables shield are presented. The results of numerical experiments on CO density calculation in small and large scale rooms using the proposed analytical solutions, integral, zone and field models for calculation of fire thermal and gas dynamics are presented. The comparison with the experimental data obtained by the authors and given in the literature has been performed. It is shown that CO density calculation in the full-scale room at the incipient stage of the fire can be carried out taking into account only the experimental dependences of CO from temperature or O2 density, that have been obtained from small-scale experiments. Therefore the solution of the equation of carbon monoxide mass conservation law is not necessary.

  9. Comparison between RVG UI sensor and Kodak InSight film for detection of incipient proximal caries

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Yukiko; Hanazawa, Tomomi; Seki, Kenji; Araki, Kazuyuki; Okano, Tomohiro [Showa Univ., Tokyo (Japan). School of Dentistry

    2002-12-01

    The purpose of this study was to compare the efficacy of the four combination modes of Trophy Radio Visio Graphy (RVG) UI sensor (Trex-Trophy Radiology Inc., Marne-la-Valee, France) and Kodak InSight film (Eastman Kodak Co., Rochester, NY) for detecting proximal dental caries. Thirty extracted human upper premolars were selected. Of 60 surfaces, 25 had carious lesions in the form of small cavities, and the rest showed no evidence of caries as verified by a micro computed tomogram (micro CT; XCT Research SA+, Stratec Medizintechnik GmbH, Pforzheim, Germany). All teeth were radiographed with the paralleling technique (60 kV, 40 cm focus-to-sensor distance). Four combination modes (high-resolution caries mode-HRC; high-sensitivity caries mode-HSC; high-resolution periodontal mode-HRP; and high-resolution endo mode-HRE) were used. Exposure was set at 0.12 sec for HRC, 0.08 sec for HSC, 0.16 sec for HRP, 0.12 sec for HRE, and 0.16 sec for the Kodak InSight film. The resulting images were evaluated by three oral radiologists. The same three observers evaluated the digital images, and were allowed to use the contrast and brightness controls in doing so. Possible differences in receiver operating characteristic (ROC) curve areas among image modalities were assessed by the Friedman test. The mean ROC curve areas were 0.66{+-}0.11 for HRC, 0.78{+-}0.02 for HSC, 0.76{+-}0.04 for HRE, 0.77{+-}0.04 for HRP, and 0.71{+-}0.09 for the Kodak InSight film. There were no statistically significant differences between HRC, HSC, HRE, HRP and the Kodak InSight film in terms of proximal caries detection. The four modes of RVG UI system are each a viable alternative to intraoral film for the detection of incipient dental caries. (author)

  10. Pattern of genetic differentiation of an incipient speciation process: The case of the high Andean killifish Orestias

    Science.gov (United States)

    Guerrero-Jiménez, Claudia Jimena; Peña, Fabiola; Morales, Pamela; Méndez, Marco; Sallaberry, Michel; Vila, Irma; Poulin, Elie

    2017-01-01

    During the Pleistocene and Holocene, the southwest Andean Altiplano (17°-22°S) was affected by repeated fluctuations in water levels, high volcanic activity and major tectonic movements. In the early Holocene the humid Tauca phase shifted to the arid conditions that have lasted until the present, producing endorheic rivers, lakes, lagoons and wetlands. The endemic fish Orestias (Cyprinodontidae) represents a good model to observe the genetic differentiation that characterizes an incipient speciation process in allopatry since the morphospecies described inhabit a restricted geographic area, with present habitat fragmentation. The genetic diversity and population structure of four endemic morphospecies of Orestias (Cyprinodontidae) found in the Lauca National Park (LNP) analyzed with mitochondrial markers (Control Region) and eight microsatellites, revealed the existence of genetic groups that matches the fragmentation of these systems. High values of genetic and phylogeographic differentiation indices were observed between Chungará Lake and Piacota lagoon. The group composed of the Lauca River, Copapujo and Chuviri wetlands sampling sites showed a clear signal of expansion, with a star-like haplotype network. Levels of genetic differentiation were lower than in Chungará and Piacota, suggesting that these localities would have differentiated after the bottlenecks linked to the collapse of Parinacota volcano. The Parinacota sample showed a population signal that differed from the other localities revealing greater genetic diversity and a disperse network, presenting haplotypes shared with other LNP localities. A mixing pattern of the different genetic groups was evident using the microsatellite markers. The chronology of the vicariance events in LNP may indicate that the partition process of the Orestias populations was gradual. Considering this, and in view of the genetic results, we may conclude that the morphospecies from LNP are populations in ongoing

  11. Entre signo e significante: a esquizofrenia incipiente segundo Conrad Between sign and signifier: the incipient schizophrenia according to Conrad

    Directory of Open Access Journals (Sweden)

    Antônio Teixeira

    2006-06-01

    Full Text Available Ao tratar da pesquisa empreendida por J. Conrad sobre a esquizofrenia incipiente, esse artigo demonstra a atualidade desse estudo: destaca-se a abordagem estrutural do desencadeamento psicótico ali inaugurada antes mesmo de Lacan estender a perspectiva estruturalista à fenomenologia da clínica. Enfatiza-se a estratégia utilizada por Conrad, que propõe pensar o desencadeamento psicótico nos termos da estrutura formal da percepção delirante. Demonstra-se em que sentido a perspectiva de Conrad resgata a inteligibilidade do fenômeno psicótico, opondo-se à estratégia da fenomenologia compreensiva fundada por Jaspers, a qual relegava ao plano somático da causalidade física os fenômenos mentais destituídos de compreensão.By dealing with Conrad's research on incipient schizophrenia, this article demonstrates the actual relevance of the study: it highlights the structural approach of psychotic crisis inaugurated by him, even before Lacan expands the structuralist perspective to the clinic's phenomenology. The author emphasizes the strategy employed by Conrad, who proposes to discuss the origins of psychotic crisis in terms of the formal structure of the delirious perception. He shows therefore the way Conrad's perspective is able to recover the intelligibility of the psychotic phenomenon, in opposition to the strategy of comprehensive phenomenology founded by Jaspers, which relegates to the somatic plan of physical causality the mental occurrences deprived of comprehension.

  12. Cavitation as a Precursor to Breakdown of Mass-Impregnated HVDC Cables

    Energy Technology Data Exchange (ETDEWEB)

    Evenset, Gunnar

    1999-09-01

    Thermal cycling has proven to be a critical test for mass-impregnated HVDC cables. The dielectric strength of the insulation is significantly reduced during the first part of the cooling. This decrease of the dielectric strength limits the development of mass-impregnated cables for higher operating voltages and higher power transfer capacities. The decrease of the dielectric strength during cooling has been assumed to be caused by formation of cavities in the mass because the thermal contraction of the mass is larger than that of the paper. Cavities have previously been observed in thermally cycled cables, but their actual formation and growth have not been studied. The fact that breakdown usually occurs a few hours into the cooling period indicates that the dynamics of the growth is important. This work studies the dynamic phenomena occurring in mass-impregnated cables during thermal cycling. In experiments on a system of mass and insulating paper, cavities were observed near the paper surface, probably caused by heterogeneous nucleation. Knowing the tensile stress at cavity formation is important because it controls the size of the cavities and the distance between independently formed cavities in a cable insulation. A test cell was designed to investigate cavitation in models of lapped insulation. The formation, growth and collapse of the cavities could be visually observed while the insulation was electrically stressed and partial discharges were measured. The first cavity generally formed in one of the butt gaps and grew both along the butt gap and into the mass layers between the papers towards adjacent butt gaps. When the cavity between the papers grew into an adjacent butt gap, the gas/vapour filled channel connecting the butt gaps was closed. In this way, one cavity grew into several butt gaps. The extent of cavities between the papers was observed to depend on the interfacial pressure. Considerable less tension is required to suck the menisci of a cavity

  13. Solid Phase Extraction of Trace Elements in Waterand Tissue Samples on a Mini Column with Diphenylcarbazone Impregnated Nano-TiO2 and Their Determination by Inductively Coupled Plasma Optical Emission Spectrometry

    Science.gov (United States)

    Baytak, Sıtkı; Arslan, Zikri

    2015-01-01

    This study presents a simple, robust and environmentally friendly solid phase preconcentration procedure for multielement determination by inductively coupled plasma optical emission spectrometry (ICP-OES) using diphenylcarbazone (DPC) impregnated TiO2 nanopowder (n-TiO2). DPC was successfully impregnated onto n-TiO2 in colloidal solution. A number of elements, including Co(II), Cr(III), Cu(II), Fe(III), Mn(II) and Zn(II) were quantitatively preconcentrated from aqueous solutions between pH 8 and 8.5 at a flow rate of 2 mL min−1, and then eluted with 2 mL of 5% (v/v) HNO3. A mini-column packed with 0.12 g DPC impregnated n-TiO2 retained all elements quantitatively from up to 250 mL multielement solution (2.5 μg per analyte) affording an enrichment factor of 125. The limits of detection (LOD) for preconcentration of 50 mL blank solutions (n = 12) were 0.28, 0.15, 0.25, 0.22, 0.12, and 0.10 μg L−1 for Co, Cr, Cu, Fe, Mn, and Zn, respectively. The relative standard deviation (RSD) for five replicate determinations was 0.8, 3.4, 2.6, 2.2, 1.2 and 3.3% for Co, Cr, Cu, Fe, Mn and Zn, respectively, at 5 μg L−1 level. The method was validated with analysis of Freshwater (SRM 1643e) and Lobster hepatopancreas (TORT-2) certified reference materials, and then applied to the determination of the elements from tap water and lake water samples by ICP-OES. PMID:26236403

  14. THE PROCEDURE REGARDING THE ADMISSION OF GUILT

    Directory of Open Access Journals (Sweden)

    ANDREI ZARAFIU

    2012-05-01

    Full Text Available Considering the present normative framework, even if in criminal matters the transactions between the judicial organs, which exercise the procedural function of indictment, and the defendant are not permitted, the admission of guilt appears as an incipient form of negotiation of penalty. In anticipation of a future special procedure regarding the accord of admission of guilt, the present institution has generated a great amount of controversy which has, inevitably, caused a matchlessly practice to appear. The purpose of this study is to identify the primary consequences of the norms which now regulate the judgment regarding the admission of guilt and to offer concrete and punctual solutions to the grave problems generated by a defective normative framework. The article has as basic study a documentary material which is comprised not only of normative guidelines, but also of a judicial practice generated by the application of these norms for almost a year. Last, but not least, the actual dimension of the admission of guilt procedure is also underlined by the dealing of the legal issues introduced by the Constitutional Court’s recently handed down decisions in these matters.

  15. Color stability of bulk-fill and incremental-fill resin-based composites polished with aluminum-oxide impregnated disks

    Directory of Open Access Journals (Sweden)

    Uzay Koc-Vural

    2017-05-01

    Full Text Available Objectives This study aimed to evaluate the color stability of bulk-fill and nanohybrid resin-based composites polished with 3 different, multistep, aluminum-oxide impregnated finishing and polishing disks. Materials and Methods Disk-shaped specimens (8 mm in diameter and 4 mm in thickness were light-cured between two glass slabs using one nanohybid bulk-fill (Tetric EvoCeram, Ivoclar Vivadent, one micro-hybrid bulk-fill (Quixfil, Dentsply, and two nanohybrid incremental-fill (Filtek Ultimate, 3M ESPE; Herculite XRV Ultra, Kerr resin-based composites, and aged by thermocycling (between 5 - 55℃, 3,000 cycles. Then, they were divided into subgroups according to the polishing procedure as SwissFlex (Coltène/Whaledent, Optidisc (Kerr, and Praxis TDV (TDV Dental (n = 12 per subgroup. One surface of each specimen was left unpolished. All specimens were immersed in coffee solution at 37℃. The color differences (ΔE were measured after 1 and 7 days of storage using a colorimeter based on CIE Lab system. The data were analyzed by univariate ANOVA, Mann-Whitney U test, and Friedmann tests (α = 0.05. Results Univariate ANOVA detected significant interactions between polishing procedure and composite resin and polishing procedure and storage time (p 0.05. Polishing reduced the discoloration resistance of Tetric EvoCeram/SwissFlex, Tetric EvoCeram/Praxis TDV, Quixfil-SwissFlex, and all Herculite XRV Ultra groups after 7 days storage (p < 0.05. Conclusions Discoloration resistance of bulk-fill resin-based composites can be significantly affected by the polishing procedures.

  16. Color stability of bulk-fill and incremental-fill resin-based composites polished with aluminum-oxide impregnated disks.

    Science.gov (United States)

    Koc-Vural, Uzay; Baltacioglu, Ismail; Altinci, Pinar

    2017-05-01

    This study aimed to evaluate the color stability of bulk-fill and nanohybrid resin-based composites polished with 3 different, multistep, aluminum-oxide impregnated finishing and polishing disks. Disk-shaped specimens (8 mm in diameter and 4 mm in thickness) were light-cured between two glass slabs using one nanohybid bulk-fill (Tetric EvoCeram, Ivoclar Vivadent), one micro-hybrid bulk-fill (Quixfil, Dentsply), and two nanohybrid incremental-fill (Filtek Ultimate, 3M ESPE; Herculite XRV Ultra, Kerr) resin-based composites, and aged by thermocycling (between 5 - 55℃, 3,000 cycles). Then, they were divided into subgroups according to the polishing procedure as SwissFlex (Coltène/Whaledent), Optidisc (Kerr), and Praxis TDV (TDV Dental) ( n = 12 per subgroup). One surface of each specimen was left unpolished. All specimens were immersed in coffee solution at 37℃. The color differences (ΔE) were measured after 1 and 7 days of storage using a colorimeter based on CIE Lab system. The data were analyzed by univariate ANOVA, Mann-Whitney U test, and Friedmann tests (α = 0.05). Univariate ANOVA detected significant interactions between polishing procedure and composite resin and polishing procedure and storage time ( p color changes were detected after 1 day storage in coffee solution ( p color-stable after 7 days ( p > 0.05). Polishing reduced the discoloration resistance of Tetric EvoCeram/SwissFlex, Tetric EvoCeram/Praxis TDV, Quixfil-SwissFlex, and all Herculite XRV Ultra groups after 7 days storage ( p bulk-fill resin-based composites can be significantly affected by the polishing procedures.

  17. Crystal deposition patterns from evaporating sessile drops on superhydrophobic and liquid impregnated surfaces

    Science.gov (United States)

    McBride, Samantha; Dash, Susmita; Varanasi, Kripa; Varanasi Group Team

    2016-11-01

    Accelerated corrosion and scale buildup near oceans is partially due to deposition of salty sea mist onto ships, cars, and building structures. Many corrosion preventative measures are expensive, time intensive, and/or have negative impacts on the environment. One solution is the use of specific surfaces that are engineered for scale resistance. In this work, we show that we can delay crystallization and reduce scale adhesion on specifically engineered liquid impregnated surfaces (LIS). The low contact angle hysteresis of the LIS results in a sliding contact line of the saline droplet during evaporation, and the elevated energy barrier of the smooth liquid interface delays crystallization. Experiments conducted on surfaces with different wettability also demonstrate the corresponding influence in controlling salt crystal polymorphism.

  18. Lubricant-impregnated surfaces for drag reduction in viscous laminar flow

    Science.gov (United States)

    Solomon, Brian; Khalil, Karim; Varanasi, Kripa; MIT Team

    2013-11-01

    For the first time, we explore the potential of lubricant impregnated surfaces (LIS) in reducing drag. LIS, inspired by the surface of the Nepenthes pitcher plant, have been introduced as a novel way of functionalizing a surface. LIS are characterized by extremely low contact angle hysteresis and have been show to effectively repel various liquids including water, oils, ketchup and blood. Motivated by the slippery nature of such surfaces, we explore the potential of LIS to reduce drag in internal flows. We observe a reduction in drag for LIS surfaces in a viscous laminar drag flow and model the impact of relevant system parameters (lubricant viscosity, working fluid viscosity, solid fraction, depth of texture, etc.).

  19. Distribution of hippocampal mossy fibers in the rat. An experimental study with silver impregnation methods

    DEFF Research Database (Denmark)

    Blackstad, T W; Brink, K; Hem, J

    1970-01-01

    The paper deals with the distribution of the axons that arise in the fascia dentata and go to the hippocampus proper. lesions were placed in the fascia dentata and degenerating mossy fibers were mapped by silver impregnation, mostly according to the method of Fink and Heimer ('67). The fascia....... Mossy fibers do not enter the fimbria at any point. Degenerating fibers can be traced to the limit between regio superior (CA 1) and regio inferior. This dentato‐hippocampal connection displays a pattern of precise localization, each level of fascia dentata projecting onto a restricted level of regio...... inferior. The bands of degenerated mossy fibers produced by lesions in the fascia dentata were largely oriented in the transverse direction (slightly in a temporal direction) and were somewhat wider distally than at the origin from the hilus. Very narrow bands were seen in a few animals with particularly...

  20. Osmium-191/iridium-191m generator based on silica gel impregnated with tridodecylmethylammonium chloride

    International Nuclear Information System (INIS)

    Issachar, D.; Abrashkin, S.; Weininger, J.; Zemach, D.; Lubin, E.; Hellman, C.; Trumper, J.

    1989-01-01

    A new separation system for an 191 Os/ 191m Ir generator is described. The system is composed of two columns in a series: a main column, packed with silica gel impregnated with tridodecylmethylammonium chloride (loaded with high activity 191 Os as an osmyl chloride); and a scavenger column, packed with activated charcoal. Iridium-191m is eluted from the generator by pH 1 saline. For clinical use the eluate is buffered by succinate solution before injection. This new system is characterized by high performance (approximately 25% 191mIr recovery with 5 X 10(-4)% 191 Os breakthrough) and long shelf-life (3 wk). The buffered eluate is sterile, pyrogen-free, and nontoxic, and contains no 192 Ir. It is suitable for first-pass radionuclide angiocardiography with a very low radiation dose to the patient

  1. Osmium-191/iridium-191m generator based on silica gel impregnated with tridodecylmethylammonium chloride

    Energy Technology Data Exchange (ETDEWEB)

    Issachar, D.; Abrashkin, S.; Weininger, J.; Zemach, D.; Lubin, E.; Hellman, C.; Trumper, J.

    1989-04-01

    A new separation system for an /sup 191/Os//sup 191m/Ir generator is described. The system is composed of two columns in a series: a main column, packed with silica gel impregnated with tridodecylmethylammonium chloride (loaded with high activity /sup 191/Os as an osmyl chloride); and a scavenger column, packed with activated charcoal. Iridium-191m is eluted from the generator by pH 1 saline. For clinical use the eluate is buffered by succinate solution before injection. This new system is characterized by high performance (approximately 25% 191mIr recovery with 5 X 10(-4)% /sup 191/Os breakthrough) and long shelf-life (3 wk). The buffered eluate is sterile, pyrogen-free, and nontoxic, and contains no /sup 192/Ir. It is suitable for first-pass radionuclide angiocardiography with a very low radiation dose to the patient.

  2. Standard test method for abrasiveness of ink-impregnated fabric printer ribbons and other web materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This test method covers the determination of the abrasiveness of ink-impregnated fabric printer ribbons and other web materials by means of a sliding wear test. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  3. Visible-light-induced surface graft polymerization via camphorquinone impregnation technique.

    Science.gov (United States)

    Ziani-Cherif, Houcine; Abe, Yusuke; Imachi, Kou; Matsuda, Takehisa

    2002-02-01

    A surface modification method that is particularly applicable to complexly shaped fabricated devices has long been awaited. In this article, we describe the visible-light-induced surface photograft polymerization technique by which an inner surface of the device is modified by visible-light irradiation through the external surface. Comphorquione, as a photoradical initiator, was impregnated on a segmented polyurethane surface by solvent soaking, followed by visible-light irradiation in the presence of monomers such as acrylamide and poly(ethylene glycol) methacrylate. The resultant surfaces were highly wettable with water, and surface chemical compositional analysis by X-ray photoelectron spectroscopy revealed that the surface was graft-polymerized with these monomers. The simple and widespread applicability of this surface modification technique to biomedical devices is discussed. Copyright 2001 John Wiley & Sons, Inc. J Biomed Mater Res 59: 386-389, 2002

  4. Sorption of cesium and strontium on Savannah River soils impregnated with colloidal silica

    International Nuclear Information System (INIS)

    Hakem, N.; Al Mahamid, I.; Apps, J.; Moridis, G.

    1997-01-01

    Colloidal silica (CS) is being considered as an injectable low viscosity fluid for creation of impermeable barrier containment of low level radioactive waste at the Savannah River Site (SRS), South Carolina. The sorption behavior of cesium and strontium on Savannah River Site Soils impregnated with Colloidal Silica was studied using a batch experimental method. The samples were prepared by addition of CS and an aqueous solution of CaCl 2 to the soil materials. Sorption studies were conducted after the gelation of the CS samples had occurred. The variation of the sorption ratio, R, as a function of cesium or strontium concentration was examined. The Freundlich isotherm was used to fit the data and very good results were obtained

  5. Synthesis and characterization of chitosan impregnated calcium alginate beads for removal of uranium from aquatic stream

    International Nuclear Information System (INIS)

    Singhal, R.K.; Basu, H.; Manisha, V.; Reddy, A.V.R.; Sawant, Manjiri; Kamane, Suman

    2015-01-01

    The present study was conducted to study the feasibility of chitosan impregnated calcium alginate beads (Cal-Alg-Chi) to sorb the excess uranium from the aquatic stream. Chitosan is a linear polysaccharide composed of randomly distributed β-(1-4)-linked D glucosamine (deacetylated unit) and N-acetyl-D-glucosamine (acetylated unit). The optimal composition of calcium alginate chitosan beads is 4 % (wt/vol) alginate gel having 5% loading of chitosan. The nature and morphology of pure and uranium sorbed calcium alginate chitosan beads were characterized by scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS), and attenuated total reflectance Fourier transform infrared spectroscopy (ATRFTIR). The results of batch sorption experiments suggest that Cal-Alg-Chi beads are very effective for removal of uranium in the pH range of 2.0-5.0 and sorption is more than 80 % in the concentration range of 1-100 mgL -1

  6. Plasma-assisted reduction of silver ions impregnated into a natural zeolite framework

    Science.gov (United States)

    Osonio, Airah P.; Vasquez, Magdaleno R.

    2018-02-01

    A green, dry, and energy-efficient method for the fabrication of silver-zeolite (AgZ) composite via 13.56 MHz radio-frequency plasma reduction is demonstrated. Impregnation by soaking and ion-exchange deposition were performed to load the silver ions (Ag+) into the sodium-zeolite samples. Characterization was performed by optical emission spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller analyses. Results indicate the successful reduction of Ag+ to its metallic state on the surface of the zeolite with a mean diameter of 165 nm. This plasma-induced reduction technique opens possibilities in several areas including catalysis, adsorption, water treatment, and medicine.

  7. System and method for preventing stator permanent magnet demagnetization during vacuum pressure impregnation

    Science.gov (United States)

    Raminosoa, Tsarafidy; Alexander, James Pellegrino; EL-Refaie, Ayman Mohamed Fawzi

    2017-06-06

    A permanent magnet electrical machine includes a stator having conductive windings wound thereon and one or more permanent magnets embedded in the stator. A magnetic keeper element is positioned on the stator so as to form a magnetic flux path with the permanent magnets, with the magnetic keeper element closing the magnetic flux path of the permanent magnets by providing a low reluctance flux path to magnetic flux generated by the permanent magnets. A vacuum pressure impregnation (VPI) process is performed on the stator to increase a thermal conductivity of the windings, with the VPI process including a curing step that is performed at a selected temperature. The magnetic keeper element sets an operating point of the permanent magnets to an internal flux density level above a demagnetization threshold associated with the selected temperature at which the curing step is performed.

  8. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation

    Science.gov (United States)

    Matsuzaki, Ryosuke; Ueda, Masahito; Namiki, Masaki; Jeong, Tae-Kun; Asahara, Hirosuke; Horiguchi, Keisuke; Nakamura, Taishi; Todoroki, Akira; Hirano, Yoshiyasu

    2016-03-01

    We have developed a method for the three-dimensional (3D) printing of continuous fiber-reinforced thermoplastics based on fused-deposition modeling. The technique enables direct 3D fabrication without the use of molds and may become the standard next-generation composite fabrication methodology. A thermoplastic filament and continuous fibers were separately supplied to the 3D printer and the fibers were impregnated with the filament within the heated nozzle of the printer immediately before printing. Polylactic acid was used as the matrix while carbon fibers, or twisted yarns of natural jute fibers, were used as the reinforcements. The thermoplastics reinforced with unidirectional jute fibers were examples of plant-sourced composites; those reinforced with unidirectional carbon fiber showed mechanical properties superior to those of both the jute-reinforced and unreinforced thermoplastics. Continuous fiber reinforcement improved the tensile strength of the printed composites relative to the values shown by conventional 3D-printed polymer-based composites.

  9. Adsorption of arsenic, phosphorus and chromium by bismuth impregnated biochar: Adsorption mechanism and depleted adsorbent utilization.

    Science.gov (United States)

    Zhu, Ningyuan; Yan, Tingmei; Qiao, Jun; Cao, Honglei

    2016-12-01

    Bismuth impregnated biochar were synthesized to deal with wastewater pollution. Nitrogen adsorption-desorption isotherms, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were used to determine the characteristics of adsorbents and explore the main adsorption mechanism. Results showed that bismuth particle was carried successfully within the biochar matrix, making contributions to creating micropore and boost specific surface area. The loaded bismuth, served as the adsorption site, rather than the specific surface area played an important role in arsenic and phosphorus adsorption. Batch adsorption experiments demonstrated a fit Langmuir model for arsenic (As) and phosphorus (P) and a suitable Freundlich model for chromium (Cr). Thermodynamic parameters depicted the endothermic nature and the spontaneous process for phosphate and arsenic adsorption. Besides, this contaminant-loaded carbon adsorbent was further applied for the removal of methylene blue from aqueous solution. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Development of separation process of Dy, Y, Tm and Yb from heavier rare earth residue by solvent impregnated resin

    International Nuclear Information System (INIS)

    Shibata, J.; Matsumoto, S.

    1998-01-01

    Full text: Heavier rare earth which is contained in a small amount in ores such as bastnesite and monazite has been accumulated as heavier rare earth residue without doing separation and purification due to lack of suitable methods. The heavier rare earth residue includes seven rare earth elements such as Tb, Dy, Ho, Y, Er, Tm and Yb. Separation and recovery process of Dy, Y, Tm and Yb from leached solution of the heavier rare earth residue was investigated by using a column method with a solvent impregnated resin. The solvent impregnated resin was prepared by impregnation of organophosphorous extractant whose trade name is PC-88A into a macro porous resin, Amberlite XAD-7. It was almost impossible to separate them in simple adsorption and elution steps. However, we attained to individually separate Dy, Y, Tm and Yb from the leached solution first by changing eluent concentration gradually from pH 2 to 2mol/ l HCl in the elution step, and secondly by using a development column and changing eluent concentration in the elution step. The separation process flow was proposed for heavier rare earth residue by using the solvent impregnated resin method

  11. Effect of PF impregnation and surface densification on the mechanical properties of small-scale wood laminated poles

    Science.gov (United States)

    Huaqiang Yu; Chung Y. Hse; Zehui Jiang

    2009-01-01

    The wood poles in the United States are from high-valued trees that are becoming more expensive and less available. Wood laminated composite poles (LCP) are a kind of alternative to solid poles. Considerable interest has developed in last century in the resin impregnation and wood surface densification to improve its physical and mechanical properties. In this...

  12. Influence of vacuum impregnation and pulsed electric field on the freezing temperature and ice propagation rates of spinach leaves

    Science.gov (United States)

    Efforts are currently directed towards improving the quality of sensitive tissues of fruits and vegetables after freezing and thawing. One of the methods under investigation is the combination of vacuum impregnation (VI) with cryoprotectants and pulsed electric field (PEF) applied to the plant tiss...

  13. Effect of impregnation pressure and time on the porosity, structure and properties of polyacrylonitrile-fiber based carbon composites

    International Nuclear Information System (INIS)

    Venugopalan, Ramani; Roy, Mainak; Thomas, Susy; Patra, A.K.; Sathiyamoorthy, D.; Tyagi, A.K.

    2013-01-01

    Carbon–carbon composites may find applications in critical parts of advanced nuclear reactors. A series of carbon–carbon composites were prepared using polyacrylonitrile (PAN) based carbon fibers. The materials were densified by impregnating two-dimensional (2D) preforms with liquid phenol formaldehyde resin at different pressures and for different periods of time and then carbonizing those by slowly heating at 1000 °C. Effects of the processing parameters on the structure of the composites were extensively studied. The study showed conclusively that open porosity decreased with increasing impregnation pressure, whereas impregnation time had lesser effect. Matrix–resin bonding also improved at higher pressure. d 002 spacing decreased and ordering along c-axis increased with concomitant increase in sp 2 -carbon fraction at higher impregnation pressures. The fiber reinforced composites exhibited short range ordering of carbon atoms and satisfied structural conditions (d 002 values) of amorphous carbon according to the turbostratic model for non-graphitic carbon materials. The composites had pellet-density of ∼85% of the theoretical value, low thermal expansion and negligible neutron-poisoning. They maintained structural integrity and retained disordered nature even on heat-treatment at ca. 1800 °C

  14. Application of encapsulated lightweight aggregate impregnated with sodium monofluorophosphate as a self-healing agent in blast furnace slag mortar

    NARCIS (Netherlands)

    Sisomphon, K.; Copuroglu, O.; Fraaij, A.

    2011-01-01

    This paper studies the potential of using expanded clay lightweight aggregate impregnated with sodium monofluorophosphate (Na2FPO3) solution which is eventually encapsulated by a cement paste layer to produce a self-healing system in blast furnace slag cement mortars. It was found that the technique

  15. Effect of impregnation pressure and time on the porosity, structure and properties of polyacrylonitrile-fiber based carbon composites

    Science.gov (United States)

    Venugopalan, Ramani; Roy, Mainak; Thomas, Susy; Patra, A. K.; Sathiyamoorthy, D.; Tyagi, A. K.

    2013-02-01

    Carbon-carbon composites may find applications in critical parts of advanced nuclear reactors. A series of carbon-carbon composites were prepared using polyacrylonitrile (PAN) based carbon fibers. The materials were densified by impregnating two-dimensional (2D) preforms with liquid phenol formaldehyde resin at different pressures and for different periods of time and then carbonizing those by slowly heating at 1000 °C. Effects of the processing parameters on the structure of the composites were extensively studied. The study showed conclusively that open porosity decreased with increasing impregnation pressure, whereas impregnation time had lesser effect. Matrix-resin bonding also improved at higher pressure. d002 spacing decreased and ordering along c-axis increased with concomitant increase in sp2-carbon fraction at higher impregnation pressures. The fiber reinforced composites exhibited short range ordering of carbon atoms and satisfied structural conditions (d002 values) of amorphous carbon according to the turbostratic model for non-graphitic carbon materials. The composites had pellet-density of ˜85% of the theoretical value, low thermal expansion and negligible neutron-poisoning. They maintained structural integrity and retained disordered nature even on heat-treatment at ca. 1800 °C.

  16. High-activity MgO-supported CoMo Hydrodesulfurization Catalysts Prepared by Non-aqueous Impregnation

    Czech Academy of Sciences Publication Activity Database

    Kaluža, Luděk; Gulková, Daniela; Vít, Zdeněk; Zdražil, Miroslav

    2015-01-01

    Roč. 162, JAN 2015 (2015), s. 430-436 ISSN 0926-3373 R&D Projects: GA ČR GAP106/11/0902 Institutional support: RVO:67985858 Keywords : CoMo/MgO * benzothiophene hydrodesulfurization * non-aqueous impregnation Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 8.328, year: 2015

  17. Mechanical and Magnetic Properties of YBCO Superconductor with Bi/CNT Composite and Resin/CNT Impregnation

    Energy Technology Data Exchange (ETDEWEB)

    Oh, W. S.; Jang, G. E. [Dept. of Advaned Materials Enginnering, Chungbuk National Uniersity, Cheongju (Korea, Republic of); Han, Y. H.; Sung, T. H. [Korea Electric Power Research Institute, Daejeon (Korea, Republic of)

    2007-10-15

    Bi/CNT composite and resin/CNT were chosen to improve the mechanical properties of YBa{sub 2}Cu{sub 3}O{sub 7}(YBCO) superconductor. In order to elucidate the effects of Bi/CNT composite and resin/CNT in YBCO superconductors, melt texture superconductor were impregnated by mixed compound of Bi and CNT into the artificial holes parallel to the c-axis, which were drilled on the YBCO superconductor. Various amount of Bi/CNT and resin/CNT were impregnated to YBCO superconductor with different holes diameters. Typical artificial holes diameters were 0.5, 0.7, and 1.0 mm respectively. Result of three-point bending test measurement, the bending strength with resin/CNT impregnation was improved up to 59.64 MPa as compared with 50.79 MPa of resin/CNT free bulk. Resin/CNT impregnation has been found to be one of the effective ways in improving the mechanical properties of bulk superconductor.

  18. A methodology based on insecticide impregnated filter paper for monitoring resistance to deltamethrin in Triatoma infestans field populations.

    Science.gov (United States)

    Remón, C; Lobbia, P; Zerba, E; Mougabure-Cueto, G

    2017-12-01

    The domiciliary presence of Triatoma infestans (Klug) (Hemiptera: Reduviidae) after control interventions was reported in recent years. Toxicological studies showed high levels of resistance to pyrethroids suggesting resistance as one of the main causes of deficient control. The aim of the present study was to develop a protocol to test resistance to deltamethrin in T. infestans collected from the field by discriminate concentration. To evaluate field insects, the effect of age (early vs. later) and nutritional state (starved vs. fed) on the deltamethrin susceptibility of each developmental stage was studied. Topical and insecticide impregnated paper bioassays were used. Using the impregnated paper, the susceptibility to deltamethrin was not affected by the age of the stadium and the nutritional states, and varied with the post-exposure time and with the different developmental stages. A discriminant concentration of deltamethrin (0.36% w/v) impregnated in filter paper was established for all developmental stages. Finally, the methodology and the discriminant concentration were evaluated in the laboratory showing high sensitivity in the discrimination of resistance. The present study developed a methodology of exposure to insecticide impregnated papers and proposes a protocol to test T. infestans in field populations with the aim to detect early evolution of resistance to deltamethrin. © 2017 The Royal Entomological Society.

  19. Tachykinin-Immunoreactive Neurons in Developing Feline Neostriatum: Somatodendritic Morphogenesis Demonstrated by Combined Immunohistochemistry/Golgi Impregnation-Gold Toning

    OpenAIRE

    Fisher, Robin; Boylan, Marea

    2011-01-01

    This investigation was designed to survey and characterize the development of a key link between chemically mediated neurotransmission and neuronal cytoarchitecture in mammalian basal ganglia. Peroxidase immunohistochemical and Golgi impregnation/gold toning methods were combined to doubly label the tachykinin neuromodulator signature and somatodendritic structure of neostriatal neurons in late fetal, postnatal and adult cats. The results supported 3 conclusions of considerable significance. ...

  20. O2 electrocatalysis in acid media on iron naphthalocyanine impregnations. Effect of nitric acid treatment on different carbon black supports

    NARCIS (Netherlands)

    Coowar, F.; Contamin, O.; Savy, M.; Scarbeck, G.; van den Ham, D.; Riga, J.; Verbist, J.J.

    1991-01-01

    O2 electrocatalysis on (2,3)FeNPc impregnations on different carbon blacks was investigated in H2SO4 medium. The effect of nitric acid treatment on the carbon black support is to enhance both the activity and stability of the catalyst. Moreover, as seen by XPS, the dissolution of iron is impeded by

  1. Improvement of LSM15-CGO10 electrodes for electrochemical removal of NOx by KNO3 and MnOx impregnation

    DEFF Research Database (Denmark)

    Traulsen, Marie Lund; Kammer Hansen, Kent

    2011-01-01

    in 1000 ppm NO, 10% O2 and 1000 ppm NO + 10% O2 in the temperature range 300-500 °C and the electrodes were investigated by scanning electron microscopy before and after testing. At 400-450 °C a NOx-storage process was observed on the KNO3-impregnated electrodes, this process appeared to be dependent...

  2. Leaching and antimicrobial properties of silver nanoparticles loaded onto natural zeolite clinoptilolite by ion exchange and wet impregnation

    CSIR Research Space (South Africa)

    Missengue, RNM

    2015-11-01

    Full Text Available This study aimed to compare the leaching and antimicrobial properties of silver that was loaded onto the natural zeolite clinoptilolite by ion exchange and wet impregnation. Silver ions were reduced using sodium borohydride (NaBH(sub4...

  3. Multi-podant diglycolamides and room temperature ionic liquid impregnated resins: an excellent combination for extraction chromatography of actinides

    NARCIS (Netherlands)

    Gujar, R.B.; Ansari, S.A.; Verboom, Willem; Mohapatra, P.K.

    2016-01-01

    Extraction chromatography resins, prepared by impregnating two multi-podant diglycolamide ligands, viz. diglycolamide-functionalized calix[4]arene (C4DGA) and tripodal diglycolamide (T-DGA) dissolved in the room temperature ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide

  4. Bacterial transmission from lens storage cases to contact lenses - Effects of lens care solutions and silver impregnation of cases

    NARCIS (Netherlands)

    Vermeltfoort, Pit B. J.; Hooymans, Johanna M. M.; Busscher, Henk J.; van der Mei, Henny C.

    2008-01-01

    The killing efficacies of multipurpose lens care solutions on planktonic and biofilm bacteria grown in polypropylene contact lens storage cases with and without silver impregnation and effects on bacterial transmission from storage cases to silicone hydrogel contact lenses were investigated. For

  5. Eucalyptus oil nanoemulsion-impregnated chitosan film: antibacterial effects against a clinical pathogen, Staphylococcus aureus, in vitro

    Directory of Open Access Journals (Sweden)

    Sugumar S

    2015-10-01

    Full Text Available Saranya Sugumar, Amitava Mukherjee, Natarajan Chandrasekaran Centre for Nanobiotechnology, VIT University, Vellore, India Abstract: Eucalyptus oil (Eucalyptus globulus nanoemulsion was formulated using low- and high-energy emulsification methods. Development of nanoemulsion was optimized for system parameters such as emulsifier type, emulsifier concentration, and emulsification methods to obtain a lower droplet size with greater stability. The minimized droplet diameter was achieved using the high-energy method of ultrasonication. Tween 80 was more effective in reducing droplet size and emulsion appearance when compared to Tween 20. Stable nanoemulsion was formulated with Tween 80 as a surfactant, and the particle size was found to be 9.4 nm (1:2 v/v. The eucalyptus oil nanoemulsion was impregnated into chitosan (1% as a biopolymer in varying concentrations. Further, the film was characterized by moisture content, microscopic study, X-ray diffraction, and Fourier transform infrared spectroscopy. Also, the film with and without nanoemulsion was evaluated against Staphylococcus aureus. The nanoemulsion-impregnated chitosan film showed higher antibacterial activity than chitosan film. These results support the inclusion of nanoemulsion-impregnated chitosan film in wound management studies. Keywords: essential oil, emulsion, biopolymer, impregnation, thin film, wound isolate

  6. Detection of antibodies to human immunodeficiency virus (HIV) in eluates from whole blood impregnated filter paper discs

    DEFF Research Database (Denmark)

    Lindhardt, B O; Bygbjerg, Ib Christian; Ulrich, K

    1987-01-01

    A method for elution of HIV antibodies from whole blood or serum impregnated filter paper discs was developed. The results from testing of 73 eluates in an enzyme linked immunosorbent assay and the immunoblotting test agreed with the results obtained by ordinary serum testing. Significant loss...

  7. Preparation of MoO3/Al2O3 Catalysts with Sharp Eggshell Mo Distribution by Slurry Impregnation

    Czech Academy of Sciences Publication Activity Database

    Kaluža, Luděk; Zdražil, Miroslav

    2002-01-01

    Roč. 78, 1-4 (2002), s. 313-318 ISSN 1011-372X R&D Projects: GA ČR GA104/01/0544 Keywords : MoO3/Al2O3 catalyst * eggshell Mo catalyst * slurry impregnation Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 1.559, year: 2002

  8. Effects of dry ice on gas permeability of nano-silver-impregnated Populus nigra and Fagus orientalis.

    Science.gov (United States)

    Taghiyari, H R; Layeghi, M; Aminzadeh Liyafooee, F

    2012-06-01

    Effects of dry-ice treatment (frozen CO(2) at -78.5°C) on gas permeability of untreated and nano-silver-impregnated poplar and beech specimens were studied here on the basis of their biological structure and woody mass as well as their vessel element types. A 200 ppm aqueous dispersion of silver nano-particles was used for impregnation; the size range of silver nano-particles was 20-80 nm. Dry-ice treatment increased gas permeability by 87 and 45% in poplar and beech, respectively. Nano-silver impregnation also increased gas permeability by 190 and 89% in poplar and beech, respectively. Dry-ice treatment on nano-silver-impregnated specimens increased gas permeability even more (31% increase in poplar but only 0.96% in beech). It may be concluded that dry-ice treatment on solid woods may be used as a practical method to increase permeability in species that because of their biological structures are impermeable; since this method alters the biological structure slightly and consequently decreases mechanical strength of solid woods insignificantly, it may substitute methods such as incising to increase permeability.

  9. Mechanical properties of porous β-tricalcium phosphate composites prepared by ice-templating and poly(ε-caprolactone) impregnation.

    Science.gov (United States)

    Flauder, Stefan; Sajzew, Roman; Müller, Frank A

    2015-01-14

    In this study ceramic scaffolds of the bioresorbable and osteoconductive bioceramic β-tricalcium phosphate (β-TCP) were impregnated with the bioresorbable and ductile polymer poly(ε-caprolactone) (PCL) to investigate the influence of the impregnation on the mechanical properties of the porous composites. The initial β-TCP scaffolds were fabricated by the ice-templating method and exhibit the typical morphology of aligned, open, and lamellar pores. This pore morphology seems to be appropriate for applications as bone replacement material. The macroporosity of the scaffolds is mostly preserved during the solution-mediated PCL impregnation as the polymer was added only in small amounts so that only the micropores of β-TCP lamellae were infiltrated and the surface of the lamellae were coated with a thin film. Composite scaffolds show a failure behavior with brittle and plastic contributions, which increase their damage tolerance, in contrast to the absolutely brittle behavior of pure β-TCP scaffolds. The energy consumption during bending and compression load was increased in the impregnated scaffolds by (a) elastic and plastic deformation of the introduced polymer, (b) drawing and formation of PCL fibrils which bridge micro- and macrocracks, and (c) friction of ceramic debris still glued together by PCL. PCL addition also increased the compressive and flexural strength of the scaffolds. An explanatory model for this strength enhancement was proposed that implicates the stiffening of cold-drawn PCL present in surface flaws and micropores.

  10. Mass transfer accompanied by reversible chemical reactions in an inert porous sphere impregnated with a stagnant liquid

    NARCIS (Netherlands)

    Hogendoorn, Kees; Versteeg, Geert; van Swaaij, Willibrordus Petrus Maria

    1993-01-01

    The absorption of gaseous components in porous particles impregnated with a reactive liquid phase has been studied theoretically. A model that describes this absorption process has been developed in which it is assumed that the porous particles act as a liquid support and are chemically inert. The

  11. Kinetics of adsorptive removal of DEClP and GB on impregnated Al2O3 nanoparticles.

    Science.gov (United States)

    Saxena, Amit; Srivastava, Avanish K; Singh, Beer; Gupta, Arvind K; Suryanarayana, Malladi V S; Pandey, Pratibha

    2010-03-15

    Nanoparticles of AP-Al(2)O(3) (aero-gel produced alumina) have been produced by an alkoxide based synthesis involving aluminum powder, methanol, toluene and water. Thus produced alumina nanoparticles were characterized and the data indicated the formation of nanoparticles of alumina in the size range of 2-30 nm with high surface area (375 m(2)/g). Thereafter, these nanoparticles were impregnated with reactive chemicals. Adsorptive removal kinetics for DEClP (diethylchlorophosphate) and GB (isopropylmethylphosphonofluoridate, sarin) was monitored by GC-FID (gas chromatograph coupled with flame ionization detector) technique and found to be following pseudo first order reaction kinetics. Among impregnated AP-Al(2)O(3) nanoparticles based sorbent systems AP-Al(2)O(3) impregnated with 9-molybdo-3-vanadophosphoric acid (10%, w/w) was found to be the most reactive with least half-life values of 7 and 30 min for the removal of DEClP and GB, respectively, whereas unimpregnated AP-Al(2)O(3) nanoparticles showed the best adsorption potential among all studied systems. In addition to this, hydrolysis reaction {identified using GC/MS (gas chromatograph coupled with mass spectrometer) technique} was found to be the route of degradation of DEClP and GB on impregnated alumina nanoparticles. (c) 2009 Elsevier B.V. All rights reserved.

  12. Cementation of the solid radioactive waste with polymer-cement solutions using the method of impregnation

    International Nuclear Information System (INIS)

    Gorbunova, O.

    2015-01-01

    Cementation of solid radioactive waste (SRW), i.e. inclusion of solid radioactive waste into cement matrix without cavities - is one of the main technological processes used for conditioning low and intermediate level radioactive waste. At FSUE 'Radon' the industrialized method of impregnation has been developed and since 2003 has been using for cementation of solid radioactive waste. The technology is that the polymer-cement solution, having high penetrating properties, is supplied under pressure through a tube to the bottom of the container in which solid radioactive waste has preliminarily been placed. The polymer-cement solution is evenly moving upwards through the channels between the particles of solid radioactive waste, fills the voids in the bulk volume of the waste and hardens, forming a cement compound, the amount of which is equal to the original volume. The aim of the investigation was a selection of a cement solution suitable for SRW impregnation (including fine particles) without solution depletion and bottom layers stuffing. It has been chosen a polymer: PHMG (polyhexamethylene-guanidine), which is a stabilizing and water-retaining component of the cement solution. The experiments confirm that the polymer increases the permeability of the cement solution by a 2-2.5 factor, the viscosity by a 1.2 factor, the stability of the consistency by a 1.5-1.7 factor, and extends the operating range of the W/C ratio to 0.5-1.1. So it is possible to penetrate a volume of SRW bigger by a 1.5-2.0 factor. It has been proved, that PHMG polymer increases strength and frost-resistance of the final compounds by a 1.8-2.7 factor, and contributes to fast strength development at the beginning of hardening and it decreases Cs-137 leashing rate by a 1.5-2 factor

  13. Catalytic flash pyrolysis of oil-impregnated-wood and jatropha cake using sodium based catalysts

    KAUST Repository

    Imran, Ali

    2015-11-24

    Catalytic pyrolysis of wood with impregnated vegetable oil was investigated and compared with catalytic pyrolysis of jatropha cake making use of sodium based catalysts to produce a high quality bio-oil. The catalytic pyrolysis was carried out in two modes: in-situ catalytic pyrolysis and post treatment of the pyrolysis vapors. The in-situ catalytic pyrolysis was carried out in an entrained flow reactor system using a premixed feedstock of Na2CO3 and biomass and post treatment of biomass pyrolysis vapor was conducted in a downstream fixed bed reactor of Na2CO3/γ-Al2O3. Results have shown that both Na2CO3 and Na2CO3/γ-Al2O3 can be used for the production of a high quality bio-oil from catalytic pyrolysis of oil-impregnated-wood and jatropha cake. The catalytic bio-oil had very low oxygen content, water content as low as 1wt.%, a neutral pH, and a high calorific value upto 41.8MJ/kg. The bio-oil consisted of high value chemical compounds mainly hydrocarbons and undesired compounds in the bio-oil were either completely removed or considerably reduced. Increasing the triglycerides content (vegetable oil) in the wood enhanced the formation of hydrocarbons in the bio-oil. Post treatment of the pyrolysis vapor over a fixed bed of Na2CO3/γ-Al2O3 produced superior quality bio-oil compared to in-situ catalytic pyrolysis with Na2CO3. This high quality bio-oil may be used as a precursor in a fractionating process for the production of alternative fuels. © 2015 Elsevier B.V.

  14. Acceptability of impregnated school uniforms for dengue control in Thailand: a mixed methods approach

    Directory of Open Access Journals (Sweden)

    Natasha Murray

    2014-09-01

    Full Text Available Background: As current dengue control strategies have been shown to be largely ineffective in reducing dengue in school-aged children, novel approaches towards dengue control need to be studied. Insecticide-impregnated school uniforms represent an innovative approach with the theoretical potential to reduce dengue infections in school children. Objectives: This study took place in the context of a randomised control trial (RCT to test the effectiveness of permethrin-impregnated school uniforms (ISUs for dengue prevention in Chachoengsao Province, Thailand. The objective was to assess the acceptability of ISUs among parents, teachers, and principals of school children involved in the trial. Methodology: Quantitative and qualitative tools were used in a mixed methods approach. Class-clustered randomised samples of school children enrolled in the RCT were selected and their parents completed 321 self-administered questionnaires. Descriptive statistics and logistic regression were used to analyse the quantitative data. Focus group discussions and individual semi-structured interviews were conducted with parents, teachers, and principals. Qualitative data analysis involved content analysis with coding and thematic development. Results: The knowledge and experience of dengue was substantial. The acceptability of ISUs was high. Parents (87.3%; 95% CI 82.9–90.8 would allow their child to wear an ISU and 59.9% (95% CI 53.7–65.9 of parents would incur additional costs for an ISU over a normal uniform. This was significantly associated with the total monthly income of a household and the educational level of the respondent. Parents (62.5%; 95% CI 56.6–68.1 indicated they would be willing to recommend ISUs to other parents. Conclusions: Acceptability of the novel tool of ISUs was high as defined by the lack of concern along with the willingness to pay and recommend. Considering issues of effectiveness and scalability, assessing acceptability of ISUs

  15. Acceptability of impregnated school uniforms for dengue control in Thailand: a mixed methods approach.

    Science.gov (United States)

    Murray, Natasha; Jansarikij, Suphachai; Olanratmanee, Phanthip; Maskhao, Pongsri; Souares, Aurélia; Wilder-Smith, Annelies; Kittayapong, Pattamaporn; Louis, Valérie R

    2014-01-01

    As current dengue control strategies have been shown to be largely ineffective in reducing dengue in school-aged children, novel approaches towards dengue control need to be studied. Insecticide-impregnated school uniforms represent an innovative approach with the theoretical potential to reduce dengue infections in school children. This study took place in the context of a randomised control trial (RCT) to test the effectiveness of permethrin-impregnated school uniforms (ISUs) for dengue prevention in Chachoengsao Province, Thailand. The objective was to assess the acceptability of ISUs among parents, teachers, and principals of school children involved in the trial. Quantitative and qualitative tools were used in a mixed methods approach. Class-clustered randomised samples of school children enrolled in the RCT were selected and their parents completed 321 self-administered questionnaires. Descriptive statistics and logistic regression were used to analyse the quantitative data. Focus group discussions and individual semi-structured interviews were conducted with parents, teachers, and principals. Qualitative data analysis involved content analysis with coding and thematic development. The knowledge and experience of dengue was substantial. The acceptability of ISUs was high. Parents (87.3%; 95% CI 82.9-90.8) would allow their child to wear an ISU and 59.9% (95% CI 53.7-65.9) of parents would incur additional costs for an ISU over a normal uniform. This was significantly associated with the total monthly income of a household and the educational level of the respondent. Parents (62.5%; 95% CI 56.6-68.1) indicated they would be willing to recommend ISUs to other parents. Acceptability of the novel tool of ISUs was high as defined by the lack of concern along with the willingness to pay and recommend. Considering issues of effectiveness and scalability, assessing acceptability of ISUs over time is recommended.

  16. HZSM-5 Catalyst for Cracking Palm Oil to Gasoline: A Comparative Study with and without Impregnation

    Directory of Open Access Journals (Sweden)

    Achmad Roesyadi

    2013-03-01

    Full Text Available It is important to develop a renewable source of energy to overcome a limited source fossil energy. Palm oil is a potential alternative and environmental friendly energy resource in Indonesia due to high production capacity of this vegetable oil. The research studied effect of catalyst to selectivity of biofuel product from cracking of palm oil. The catalyst consisted of HZSM-5 catalyst with or without impregnation. The research was conducted in two steps, namely catalyst synthesized and catalytic cracking process. HZSM-5 was synthesized using Plank methods. The characterization of the synthesized catalysts used AAS (Atomic Absorption Spectroscopy and BET (Brunaueur Emmet Teller. The cracking was carried out in a fixed bed microreactor with diameter of 1 cm and length of 16 cm which was filled with 0.6 gram catalyst. The Zn/HZSM-5 catalyst was recommended for cracking palm oil for the high selectivity to gasoline. © 2013 BCREC UNDIP. All rights reserved.(Selected Paper from International Conference on Chemical and Material Engineering (ICCME 2012Received: 28th September 2012; Revised: 19th November 2012; Accepted: 20th December 2012[How to Cite: A. Roesyadi, D. Hariprajitno, N. Nurjannah, S.D. Savitri, (2013. HZSM-5 Catalyst for Cracking Palm Oil to Gasoline: A Comparative Study with and without Impregnation. Bulletin of Chemical Reaction Engineering & Catalysis, 7 (3: 185-190.(doi:10.9767/bcrec.7.3.4045.185-190][Permalink/DOI: http://dx.doi.org/10.9767/bcrec.7.3.4045.185-190 ] View in  |

  17. Silver-Impregnated Occlusive Dressing Reduces Rates of Acute Periprosthetic Joint Infection After Total Joint Arthroplasty.

    Science.gov (United States)

    Grosso, Matthew J; Berg, Ari; LaRussa, Samuel; Murtaugh, Taylor; Trofa, David P; Geller, Jeffrey A

    2017-03-01

    Commercial silver-impregnated occlusive dressings (such as Aquacel Ag Surgical wound dressing) have been touted as antimicrobial dressings to be used following total joint arthroplasty. Given the increased cost of an Aquacel dressing over a standard dressing for total joint arthroplasty, the objective of this study was to determine whether Aquacel surgical dressing is effective in reducing the rates of acute periprosthetic joint infection (PJI) compared to standard sterile dressing. We retrospectively reviewed the charts of 1173 consecutive patients who underwent a total knee or total hip arthroplasty between 2007 and 2015 by 1 surgeon. The surgeon switched from using a standard xeroform/gauze dressing to an Aquacel dressing in June 2011, with no other major changes in antimicrobial management. Charts were reviewed for evidence of acute PJI (within 3 months of surgery). There were a total of 11 cases of acute PJI in this patient cohort (0.94%). The incidence of acute PJI for patients managed with a sterile xeroform dressing was 1.58% (9 of 568 patients), compared to 0.33% (2 of 605 patients) with the use of Aquacel dressing. Univariate analysis showed this to be statistically significant (P = .03), and a multiple logistic regression model supported Aquacel surgical dressing as a protective factor with an odds ratio of 0.092 (95% confidence interval, 0.017-0.490; P = .005). This 4-fold decrease in acute PJI with the use of Aquacel dressing supports the use of silver-impregnated occlusive dressings for the reduction of acute PJI. Copyright © 2016 Elsevier Inc. All rights reserved.

  18. A study of the mechanism of fluoride adsorption from aqueous solutions onto Fe-impregnated chitosan.

    Science.gov (United States)

    Zhang, Jing; Chen, Nan; Tang, Zheng; Yu, Yang; Hu, Qili; Feng, Chuanping

    2015-05-14

    The adsorption of fluoride from aqueous solutions onto an Fe-impregnated chitosan (Fe-CTS) granular adsorbent was studied, and the adsorption capacity was determined to be 1.9736 mg g(-1) at an initial fluoride concentration of 10 mg L(-1). The effects of the initial fluoride concentration, dosage, and temperature were investigated using factorial design and analysis. The results indicated that high initial fluoride concentrations, low dosages, and low temperatures could enhance the fluoride adsorption capacity. In addition, Fe-CTS exhibited high selectivity for fluoride removal in the presence of high levels of several coexisting anions (nitrate, chloride, bicarbonate, and phosphate), except carbonate and sulfate. The adsorption process followed the Langmuir model at low fluoride concentrations and the Freundlich model at high initial fluoride concentrations. The data also fit the pseudo-second-order model. Scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, and extended X-ray absorption fine-structure (EXAFS) spectroscopy were used to elucidate the adsorption mechanism. The FTIR and EXAFS analyses revealed that Fe was chelated with -NH2 and -OH groups on the CTS, and fluoride adsorption on the Fe-CTS occurred due to ion exchange between chloride and fluoride. a granular Fe-impregnated chitosan (Fe-CTS) adsorbent was synthesized via chelation of Fe ions to -OH and -NH2 groups of CTS. The Fe-CTS granular adsorbent exhibited high performance for the adsorption of fluoride. The mechanism of fluoride adsorption on Fe-CTS was elucidated using EXAFS and FTIR analyses. Fluoride adsorption on Fe-CTS occurred via ion exchange between chloride and fluoride.

  19. Distribution of isodose curves in urological surgical procedures

    International Nuclear Information System (INIS)

    Lanfredi, M.P.; Dias, J.H.; Ravazio, R.C.; Anés, M.; Bacelar, A.; Lykawka, R.

    2017-01-01

    During urological surgical procedures with fluoroscopy, the doses of the care team may be significant. However, the knowledge of the occupational exposure of these professionals is still very incipient in the national surgical centers. The objective of the study is to determine the isodose curves of the urological surgical procedures, in order to estimate the exposure of the personnel involved. The equipment used was a Arco-C BV Philips Bracelet. Patients with thicknesses of 20 and 28 cm were simulated using acrylic plates. The dose rates were measured with RaySafe i2 Unfors dosimeters positioned in a 50 x 50 cm mesh at three different heights of the floor: 95, 125 and 165 centimeters respectively corresponding to the gonadal, thoracic and crystalline regions of a typical adult . The isodose curves applied to the distribution of the surgical team suggest that the exposures are in the following descending order of intensity: primary physician, auxiliary physician, scrub nurse, anesthetist and nurse

  20. Environmental procedures

    International Nuclear Information System (INIS)

    1992-01-01

    The European Bank has pledged in its Agreement to place environmental management at the forefront of its operations to promote sustainable economic development in central and eastern Europe. The Bank's environmental policy is set out in the document titled, Environmental Management: The Bank's Policy Approach. This document, Environmental Procedures, presents the procedures which the European Bank has adopted to implement this policy approach with respect to its operations. The environmental procedures aim to: ensure that throughout the project approval process, those in positions of responsibility for approving projects are aware of the environmental implications of the project, and can take these into account when making decisions; avoid potential liabilities that could undermine the success of a project for its sponsors and the Bank; ensure that environmental costs are estimated along with other costs and liabilities; and identify opportunities for environmental enhancement associated with projects. The review of environmental aspects of projects is conducted by many Bank staff members throughout the project's life. This document defines the responsibilities of the people and groups involved in implementing the environmental procedures. Annexes contain Environmental Management: The Bank's Policy Approach, examples of environmental documentation for the project file and other ancillary information

  1. Can Monitoring Fetal Intestinal Inflammation Using Heart Rate Variability Analysis Signal Incipient Necrotizing Enterocolitis of the Neonate?

    Science.gov (United States)

    Liu, Hai Lun; Garzoni, Luca; Herry, Christophe; Durosier, Lucien Daniel; Cao, Mingju; Burns, Patrick; Fecteau, Gilles; Desrochers, André; Patey, Natalie; Seely, Andrew J E; Faure, Christophe; Frasch, Martin G

    2016-04-01

    Necrotizing enterocolitis of the neonate is an acute inflammatory intestinal disease that can cause necrosis and sepsis. Chorioamnionitis is a risk factor of necrotizing enterocolitis. The gut represents the biggest vagus-innervated organ. Vagal activity can be measured via fetal heart rate variability. We hypothesized that fetal heart rate variability can detect fetuses with incipient gut inflammation. Prospective animal study. University research laboratory. Chronically instrumented near-term fetal sheep (n = 21). Animals were surgically instrumented with vascular catheters and electrocardiogram to allow manipulation and recording from nonanesthetized animals. In 14 fetal sheep, inflammation was induced with lipopolysaccharide (IV) to mimic chorioamnionitis. Fetal arterial blood samples were drawn at selected time points over 54 hours post lipopolysaccharide for blood gas and cytokines (interleukin-6 and tumor necrosis factor-α enzymelinked immunosorbent assay). Fetal heart rateV was quantified throughout the experiment. The time-matched fetal heart rate variability measures were correlated to the levels of interleukin-6 and tumor necrosis factor-α. Upon necropsy, ionized calcium binding adaptor molecule 1+ (Iba1+), CD11c+ (M1), CD206+ (M2 macrophages), and occludin (leakiness marker) immunofluorescence in the terminal ileum was quantified along with regional Iba1+ signal in the brain (microglia). Interleukin-6 peaked at 3 hours post lipopolysaccharide accompanied by mild cardiovascular signs of sepsis. At 54 hours, we identified an increase in Iba1+ and, specifically, M1 macrophages in the ileum accompanied by increased leakiness, with no change in Iba1 signal in the brain. Preceding this change on tissue level, at 24 hours, a subset of nine fetal heart rate variability measures correlated exclusively to the Iba+ markers of ileal, but not brain, inflammation. An additional fetal heart rate variability measure, mean of the differences of R-R intervals

  2. Comparison between RVG UI sensor and Kodak InSight film for detection of incipient proximal caries

    International Nuclear Information System (INIS)

    Matsuda, Yukiko; Hanazawa, Tomomi; Seki, Kenji; Araki, Kazuyuki; Okano, Tomohiro

    2002-01-01

    The purpose of this study was to compare the efficacy of the four combination modes of Trophy Radio Visio Graphy (RVG) UI sensor (Trex-Trophy Radiology Inc., Marne-la-Valee, France) and Kodak InSight film (Eastman Kodak Co., Rochester, NY) for detecting proximal dental caries. Thirty extracted human upper premolars were selected. Of 60 surfaces, 25 had carious lesions in the form of small cavities, and the rest showed no evidence of caries as verified by a micro computed tomogram (micro CT; XCT Research SA+, Stratec Medizintechnik GmbH, Pforzheim, Germany). All teeth were radiographed with the paralleling technique (60 kV, 40 cm focus-to-sensor distance). Four combination modes (high-resolution caries mode-HRC; high-sensitivity caries mode-HSC; high-resolution periodontal mode-HRP; and high-resolution endo mode-HRE) were used. Exposure was set at 0.12 sec for HRC, 0.08 sec for HSC, 0.16 sec for HRP, 0.12 sec for HRE, and 0.16 sec for the Kodak InSight film. The resulting images were evaluated by three oral radiologists. The same three observers evaluated the digital images, and were allowed to use the contrast and brightness controls in doing so. Possible differences in receiver operating characteristic (ROC) curve areas among image modalities were assessed by the Friedman test. The mean ROC curve areas were 0.66±0.11 for HRC, 0.78±0.02 for HSC, 0.76±0.04 for HRE, 0.77±0.04 for HRP, and 0.71±0.09 for the Kodak InSight film. There were no statistically significant differences between HRC, HSC, HRE, HRP and the Kodak InSight film in terms of proximal caries detection. The four modes of RVG UI system are each a viable alternative to intraoral film for the detection of incipient dental caries. (author)

  3. Individual-Based Modeling Approach to Assessment of the Impacts of Landscape Complexity and Climate on Dispersion, Detectability and Fate of Incipient Medfly Populations

    Directory of Open Access Journals (Sweden)

    Slawomir A. Lux

    2018-01-01

    Full Text Available The objective of the presented study was to demonstrate the potential of a bottom-up “ethological” approach and individual-based model of Markov-like stochastic processes, employed to gain insights into the factors driving behavior and fate of the invasive propagule, which determine the initial stages of pest invasion and “cryptic” existence of the localized, ultra-low density incipient pest populations. The applied model, PESTonFARM, is driven by the parameters derived directly from the behavior and biology of the target insect species, and spatiotemporal traits of the local terrain and climate. The model projections are actively generated by behavior of the primary causative actors of the invasion processes—individual “virtual” insects—members of the initial propagules or incipient populations. Algorithms of the model were adjusted to reflect behavior and ecology of the Mediterranean fruit fly, Ceratitis capitata, used as a case-example in the presented study. The model was parametrized based on compiled published experimental information about C. capitata behavior and development, and validated using published data from dispersion and trapping studies. The model reliably simulated behavior, development and dispersion of individual members of an invasive cohort, and allowed to quantify pest establishment and detection chances in landscapes of varying spatiotemporal complexity, host availability and climates. The results support the common view that, under optimal conditions (farmland with continuous fruit availability and suitable climate, even a single propagule of medium size (100 females usually results in pest establishment and detection within the first year post-invasion. The results demonstrate, however, that under specific sub-optimal conditions determined by the local climate, weather fluctuations and landscape topography (e.g., sub-urban, the incipient cryptic populations may occasionally continue for several

  4. Prevalencia de lesiones incipientes de caries dental en niños escolares Prevalence of incipient lesions of dental caries in school children

    Directory of Open Access Journals (Sweden)

    Nayda Nasco Hidalgo

    2008-06-01

    Full Text Available OBJETIVOS: determinar la prevalencia de lesiones incipientes de caries dental en los niños de 6-11 años de la escuela primaria "José A Echeverría," municipio Plaza de la Revolución en el período de enero a diciembre del 2006, identificar en el grupo estudiado, la frecuencia de niños según número de lesiones incipientes y la frecuencia de lesiones incipientes por ubicación del diente en la arcada y por superficie dentaria. MÉTODOS: se realizó un estudio observacional descriptivo de corte transversal, el universo estuvo integrado por todos los niños que estuvieran en esas edades y que cumplieran con los criterios de inclusión, para un total de 236, los cuales fueron examinados al aire libre y con luz natural, utilizando el método visual- táctil suave. Los dientes se limpiaron con algodón y se secaron con peras de aire para detectar la presencia de lesiones incipientes de caries, las cuales fueron señalizadas en un modelo de dentigrama, en el lugar correspondiente a la superficie afectada. RESULTADOS: se halló que el 22,5 % de los escolares examinados presentaba estas lesiones, de ellos el 60,1 % correspondió al sexo femenino; el 19,5 % del total de niños presentó una lesión y sólo el 3% tenia dos lesiones incipientes de caries dental; el 79,2 % de las mismas se encontraron en los dientes posteriores, fueron las superficies lisas las más afectadas con un 45,3 %. CONCLUSIONES: Alrededor de la cuarta parte de los niños estudiados presentaron lesiones incipientes de caries, siendo el sexo femenino el más afectado. Del total de niños que poseían lesiones incipientes, la mayor cifra correspondió a los que presentaban una lesión. Los dientes posteriores fueron los más afectados por lesiones incipientes. Las superficies lisas mostraron más lesiones incipientes que las oclusales y proximalesOBJECTIVES: to determine the prevalence of incipient lesions of dental caries in children aged 6-11 of "José A Echeverría" Primary

  5. A high sensibility technique to detect the incipient defects in high tension bushings; Una tecnica de alta sensibilidad para detectar defectos incipientes en boquillas de alta tension

    Energy Technology Data Exchange (ETDEWEB)

    Robles Pimentel, Edgar; Mestizo Rivera, Antolin; Romero Camberos, Ramon [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    In this article a testing technique to locate incipient faults in transformer bushings is reported, specifically the one related to the internal disconnection of the capacitive tap, which is exemplified with a device having a problem of this kind. [Espanol] En el presente articulo se reporta una tecnica de prueba para localizar fallas incipientes en las boquillas de los transformadores, especificamente la relacionada con la desconexion interna del tap capacitivo, lo cual se ejemplifica con un dispositivo que padece un problema de ese tipo.

  6. A rapid impregnation method for loading desired amounts of extractant on prepacked reversed-phase columns for high performance liquid chromatographic separation of metal ions.

    Science.gov (United States)

    Ramzan, Muhammad; Kifle, Dejene; Wibetoe, Grethe

    2017-06-02

    A time-efficient impregnation method for loading extractant onto reversed-phase columns was developed, using di-(2-ethylhexyl) phosphoric acid (HDEHP) as a model extractant. The optimal loading conditions for the impregnation process of a standard analytical scale column was achieved by dissolving an appropriate amount of HDEHP (per void volume) in n-pentane, flushing the column with two void volumes (5mL) of impregnation solution and heating the column for a short time to remove the solvent. The process takes about one hour, a significant time reduction compared to commonly used impregnation methods (17-23h). The chromatographic traits for separation of the lighter lanthanides (La-Gd) using columns impregnated under different conditions were evaluated; heating for short period of time gave improved column performance most likely due to the presence of n-pentane in the pores of the support material. A linear relation was found (R 2 =0.9934) for the amount of HDEHP loaded as a function of HDEHP concentration in the impregnation solution. The coated amounts of HDEHP were in the range of 0.29-2.25mmol per column by flushing with 5mL of impregnation solution containing 0.3-5.0mmol of HDEHP per void volume. This 'flush-evaporate' impregnation method allowed for loading a pre-determined amount of extractant and produces very small amounts of organic waste. An overview of the various impregnation approaches previously used for extractant coating on prepacked columns and bulk support materials is also presented. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Radiochemical procedures

    International Nuclear Information System (INIS)

    Lyon, W.S.

    1982-01-01

    The modern counting instrumentation has largely obviated the need for separation processes in the radiochemical analysis but problems in low-level radioactivity measurement, environmental-type analyses, and special situations caused in the last years a renaissance of the need for separation techniques. Most of the radiochemical procedures, based on the classic works of the Manhattan Project chemists of the 1940's, were published in the National Nuclear Energy Series (NNES). Improvements such as new solvent extraction and ion exchange separations have been added to these methods throughout the years. Recently the Los Alamos Group have reissued their collected Radiochemical Procedures containing a short summary and review of basic inorganic chemistry - 'Chemistry of the Elements on the Basis of Electronic Configuration'. (A.L.)

  8. Application of linear and non-linear methods for modeling removal efficiency of textile dyes from aqueous solutions using magnetic Fe3O4 impregnated onto walnut shell

    Science.gov (United States)

    Ashrafi, Motahare; Arab Chamjangali, Mansour; Bagherian, Ghadamali; Goudarzi, Nasser

    2017-01-01

    The performance of the Nano-magnetite Fe3O4 impregnated onto walnut shell (Fe3O4-WNS), which possessed the adsorption features of walnut shell and the magnetic property of Fe3O4, was investigated for the elimination of the methyl violet and Rhodamine 6G from contaminated aqueous solutions. The effects of different experimental variables on the removal efficiency of the cited dyes were examined. Then these variables were used as the inputs to generate linear and non-linear models such as the multiple linear regression, random forest, and artificial neural network to predict the removal efficiency of these dye species at different experimental conditions. The validation studies of these models were performed using the test set, which was not present in the modeling procedure. It was found that ANN had a higher ability to predict the adsorption process under different experimental conditions, and could be applied for the development of an automated dye wastewater removal plant. Also the maximum adsorption capacity (qmax) indicated that the qmax value for Fe3O4-WNS for removal of cationic dyes was comparable or better than that for some reported adsorbents. Also it should be cited that exhausted Fe3O4-WNS was regenerated using dishwashing liquid, and reused for removal of the cited dye species from aqueous solutions.

  9. Impregnated multiwalled carbon nanotubes as efficient sorbent for the solid phase extraction of trace amounts of heavy metal ions in food and water samples.

    Science.gov (United States)

    Gouda, Ayman A; Al Ghannam, Sheikha M

    2016-07-01

    A new, sensitive and simple solid phase extraction (SPE), separation and preconcentration method of some heavy metal ions, Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II) at trace levels using multiwalled carbon nanotubes (MWCNTs) impregnated with 2-(2-benzothiazolylazo)orcinol (BTAO) from food and water samples were investigated. The effect of analytical parameters was examined. The metals retained on the nanotubes at pH 7.0 were eluted by 5.0mL HNO3 (2.0molL(-1)). The influence of matrix ions on the proposed method was evaluated. The preconcentration factor was calculated and found to be 100. The detection limits (LODs) for Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II) were found at 0.70, 1.2, 0.80, 2.6 and 2.2μgL(-1), respectively. The relative standard deviation (RSD) and the recoveries of the standard addition method were lower than 5.0% and 95-102%, respectively. The new procedure was successfully applied to the determination of trace amounts of the studied metal ions in various food and water samples and validated using certified reference materials SRM 1570A (spinach leaves) with satisfactory and compatible results. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Investigation of barium-calcium aluminate process to manufacture and characterize impregnated thermionic cathode for power microwave devices; Investigacao do processo de obtencao de aluminatos de bario e calcio para construcao e caracterizacao de catodos termionicos impregnados para aplicacao em dispositivos de microondas de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Higashi, Cristiane

    2006-07-01

    In the present work it is described the barium calcium aluminate manufacture processes employed to produce impregnated cathodes to be used in a traveling-wave tube (TWT). The cathodes were developed using a tungsten body impregnated with barium and calcium aluminate with a 5:3:2 proportion (molar). Three different processes were investigated to obtain this material: solid-state reaction, precipitation and crystallization. Thermal analysis, thermogravimetry specifically, supported to determine an adequate preparation procedure (taking into account temperature, time and pyrolysis atmosphere). It was verified that the crystallization showed a better result when compared to those investigated (solid-state reaction and precipitation techniques - formation temperature is about 1000 deg C in hydrogen atmosphere), whereas it presented the lower formation temperature (800 deg C) in oxidizing atmosphere (O{sub 2}). It was used the practical work function distribution theory (PWFD) of Miram to characterize thermionic impregnated cathode. The PWFD curves were used to characterize the barium-calcium aluminate cathode. PWFD curves shown that the aluminate cathode work function is about 2,00 eV. (author)

  11. The effect of impregnation by resin and CNT compound on the mechanical and magnetic properties of YBCO superconductor

    Science.gov (United States)

    Jang, G. E.; Oh, W. S.; Kim, C. J.; Han, Y. H.; Jung, S. Y.; Sung, T. H.

    2008-09-01

    Bulk YBCO superconductor was manufactured with the top-seeded melt grown method. The artificial hole with 0.5 mm and 0.7 mm parallel to the c-axis was mechanically drilled. The YBCO bulks containing artificial holes were impregnated by the mixture of resin and CNT (carbon nano tube), respectively. In order to estimate the influence of the hole and impregnation by CNT and resin, the magnetic and mechanical properties were measured and compared with before and after reinforcement. It was confirmed that the maximum magnetic flux density of the sample without any holes was 0.243 T, while the maximum magnetic flux density of sample with 0.5 mm and 0.7 mm holes in diameter was around 0.244 T and 0.208 T, respectively. As compared with the results before and after reinforcement, the trapped field value taken on the perforated YBCO is somewhat higher than the ones after reinforcement.

  12. Wood-polymer composite: physical and mechanical properties of some wood species impregnated with styrene and methyl methacrylate

    Directory of Open Access Journals (Sweden)

    Denise Ortigosa Stolf

    2004-12-01

    Full Text Available This study aimed to demonstrate the feasibility of obtaining wood-polymer composites (WPC displaying a performance superior to that of untreated wood from reforested genera. To this end, wood samples of Pine (Pinus caribaea and Eucalyptus (Eucalyptus grandis, whose density is compatible with this process, were impregnated with the polymeric monomers styrene and methyl methacrylate, using benzoyl peroxide to initiate the polymerization process forming free radicals. The vacuum-pressure method was used to impregnate the samples with monomer-initiator solution. The results indicated a significant improvement of all the properties investigated, including dimensional stability, for the Pine-WPC, while Eucalyptus-WPC, owing to the wood's low permeability, showed only increased values of hardness parallel and perpendicular to grain.

  13. Resin-impregnated bulk RE-Ba-Cu-O current leads for the superconducting magnet on maglev train

    Science.gov (United States)

    Tomita, M.; Nagashima, K.; Herai, T.; Murakami, M.

    2002-08-01

    Bulk RE-Ba-Cu-O (RE: rare earth elements) superconductors exhibit high critical current density ( Jc) and low thermal conductivity, that are the characteristics desired for the current lead applications. In this study, we studied whether the resin-impregnated Y-Ba-Cu-O rods can be used as the current lead for the superconducting magnet on a magnetically levitated train. The fatigue test showed that the mechanical properties of resin-impregnated Y-Ba-Cu-O rods are sufficiently good for maglev applications. We could also pass the electric currents of 500 A without heat generation. This was further confirmed by field distribution measurements, which showed that the superconducting state of the current lead was well maintained when the currents of 500 A were passed.

  14. Achieving Amphibious Superprotonic Conductivity in a CuI Metal-Organic Framework by Strategic Pyrazinium Salt Impregnation.

    Science.gov (United States)

    Khatua, Sajal; Bar, Arun Kumar; Sheikh, Javeed Ahmad; Clearfield, Abraham; Konar, Sanjit

    2018-01-19

    Treatment of a pyrazine (pz)-impregnated Cu I metal-organic framework (MOF) ([1⊃pz]) with HCl vapor renders an interstitial pyrazinium chloride salt-hybridized MOF ([1⊃pz⋅6 HCl]) that exhibits proton conductivity over 10 -2  S cm -1 both in anhydrous and under humid conditions. Framework [1⊃pz⋅6 HCl] features the highest anhydrous proton conductivity among the lesser-known examples of MOF-based materials exhibiting proton conductivity under both anhydrous and humid conditions. Moreover, [1⊃pz] and corresponding pyrazinium sulfate- and pyrazinium phosphate-hybridized MOFs also exhibit superprotonic conductivity over 10 -2  S cm -1 under humid conditions. The impregnated pyrazinium ions play a crucial role in protonic conductivity, which occurs through a Grotthuss mechanism. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Impregnation of cotton fabric with silver nanoparticles synthesized by dextran isolated from bacterial species Leuconostoc mesenteroides T3.

    Science.gov (United States)

    Davidović, Slađana; Miljković, Miona; Lazić, Vesna; Jović, Danica; Jokić, Bojan; Dimitrijević, Suzana; Radetić, Maja

    2015-10-20

    This study was aimed to highlight the possibility of cotton fabric impregnation with silver nanoparticles synthesized by dextran isolated from Leuconostoc mesenteroides T3 in order to obtain antimicrobial properties. The fabrication of dextran was proved by FTIR spectroscopy. Particle sizes of synthesized dextran and silver nanoparticles were measured by dynamic light scattering method. The presence of silver nanoparticles on the surface of cotton fabric was confirmed by scanning electron microscopy, X-ray diffraction measurements and reflectance spectrophotometry. Antimicrobial activity of cotton fabric impregnated with silver nanoparticles was tested against bacteria Escherichia coli and Staphylococcus aureus, and fungus Candida albicans. The results indicated that synthesized silver nanoparticles can provide satisfactory antimicrobial activity. However, maximum reduction (99.9%) of all tested microorganisms can be obtained only when 1.0mmolL(-1) colloid consisting of silver nanoparticles is applied. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Supercritical impregnation of polymer matrices spatially confined in microcontainers for oral drug delivery: Effect of temperature, pressure and time

    DEFF Research Database (Denmark)

    Marizza, Paolo; Pontoni, L.; Rindzevicius, Tomas

    2016-01-01

    The present study is aimed to enhance the oral bioavailability of ketoprofen by inserting it into the matrixof poly(vinylpyrrolidone) (PVP) K10 spatially confined into microcontainers, by means of supercriticalCO2-aided impregnation. Microcontainers are cylindrical reservoirs, with typical sizes...... sol-ubility in water. In a previous study we introduced a novel technique for drug loading of microcontainers,based on inkjet printing and supercritical impregnation (SCI). We showed that SCI produces accurate andreproducible drug loading for large arrays of microcontainers. In the attempt...... parameters(temperature, pressure, time, drug concentration in the supercritical phase) was elucidated with respectto the loading capacity. The microcontainer filling was observed by means of optical macroimaging, X-ray microtomography and scanning electron microscopy. The physical state of the drug...

  17. Air-Impregnated Nanoporous Anodic Aluminum Oxide Layers for Enhancing the Corrosion Resistance of Aluminum.

    Science.gov (United States)

    Jeong, Chanyoung; Lee, Junghoon; Sheppard, Keith; Choi, Chang-Hwan

    2015-10-13

    Nanoporous anodic aluminum oxide layers were fabricated on aluminum substrates with systematically varied pore diameters (20-80 nm) and oxide thicknesses (150-500 nm) by controlling the anodizing voltage and time and subsequent pore-widening process conditions. The porous nanostructures were then coated with a thin (only a couple of nanometers thick) Teflon film to make the surface hydrophobic and trap air in the pores. The corrosion resistance of the aluminum substrate was evaluated by a potentiodynamic polarization measurement in 3.5 wt % NaCl solution (saltwater). Results showed that the hydrophobic nanoporous anodic aluminum oxide layer significantly enhanced the corrosion resistance of the aluminum substrate compared to a hydrophilic oxide layer of the same nanostructures, to bare (nonanodized) aluminum with only a natural oxide layer on top, and to the latter coated with a thin Teflon film. The hydrophobic nanoporous anodic aluminum oxide layer with the largest pore diameter and the thickest oxide layer (i.e., the maximized air fraction) resulted in the best corrosion resistance with a corrosion inhibition efficiency of up to 99% for up to 7 days. The results demonstrate that the air impregnating the hydrophobic nanopores can effectively inhibit the penetration of corrosive media into the pores, leading to a significant improvement in corrosion resistance.

  18. Photo-decolorization and detoxification of toxic dyes using titanium dioxide impregnated chitosan beads.

    Science.gov (United States)

    Farzana, M Hasmath; Meenakshi, Sankaran

    2014-09-01

    The removal of three different dyes namely Reactive Red 2 (RR), Methylene Blue (MB) and Rhodamine B (RB) using titanium dioxide impregnated chitosan beads (TCB) by photocatalytic method has been studied. The TCB was characterized by Fourier transform Infrared (FTIR) Spectral studies and Scanning Electron Microscope (SEM), Energy Dispersive Analysis of X-ray (EDAX). The photocatalytic activity of TCB for the decolorization of the three dyes is much higher than that of bare titanium dioxide, which can be attributed to the synergistic effect of TiO2 and chitosan. The chitosan adsorbs dye molecule which continuously supplies, dye molecule for degradation by TiO2 thereby preventing the electron-hole recombination. The photocatalytic experiment was carried out by varying different parameters such as irradiation time, dosage, pH, substrate concentration and co-ions. The kinetics of decolorization of dyes are explained on the basis of Langmuir-Hinshelwood mechanism. The mineralization of dyes has also been confirmed by COD measurements. Copyright © 2014. Published by Elsevier B.V.

  19. Antibacterial and Antimycotic Activity of Cotton Fabrics, Impregnated with Silver and Binary Silver/Copper Nanoparticles

    Science.gov (United States)

    Eremenko, A. M.; Petrik, I. S.; Smirnova, N. P.; Rudenko, A. V.; Marikvas, Y. S.

    2016-01-01

    Effective method of obtaining of the bactericidal bandage materials by impregnation of cotton fabric by aqueous solutions of silver and copper salts followed by a certain regime of heat treatment is developed. The study of obtained materials by methods of optical spectroscopy, electron microscopy, and X-ray phase analysis showed the formation of crystalline silver nanoparticles (NPs) and bimetallic Ag/Cu composites with the corresponding surface plasmon resonance (SPR) bands in the absorption spectra. High antimicrobial and antimycotic properties of tissues with low concentrations of Ag and Ag/Cu nanoparticles (Ag/Cu NPs) (in the range 0.06-0.25 weight percent (wt%) for Ag and 0.015-0.13 wt% for Ag/Cu) is confirmed in experiments with a wide range of multidrug-resistant bacteria and fungi: Escherichia coli, Enterobacter aerogenes, Proteus mirabilis, Klebsiella pneumoniae, Candida albicans yeasts, and micromycetes . Textile materials with Ag NPs demonstrate high antibacterial activity, while fabrics doped with bimetallic composite Ag/Cu have pronounced antimycotic properties. Bactericidal and antifungal properties of the obtained materials do not change after a washing. Production of such materials is extremely fast, convenient, and cost-effective.

  20. Preparation of Sr adsorptive fiber by impregnating with crown ether derivative for 90Sr measurement

    International Nuclear Information System (INIS)

    Horita, Takuma; Asai, Shiho; Hanzawa, Yukiko; Kitatsuji, Yoshihiro; Konda, Miki; Saito, Kyoichi; Fujiwara, Kunio; Sugo, Takanobu

    2017-01-01

    A Sr adsorption fiber was prepared for rapid analysis of 90 Sr content in the fiber using radiation-induced emulsion graft polymerization and subsequent chemical modification. A polyethylene fiber with a diameter of 13 μm was first immersed in a methanol solution of an epoxy-group-containing vinyl monomer, glycidyl methacrylate (GMA), and polyoxyethylene sorbitol ester (Tween20) as a surfactant for the graft-polymerization of GMA. Octadecylamine was then bound to a polymer chain extending from the fiber surface, providing hydrophobicity to the polymer chain. Dicyclohexano-18-crown-6 (DCH18C6) was finally impregnated onto the polymer chain via a hydrophobic interaction between the octadecyl moiety of the polymer chain and the cyclohexyl moiety of DCH18C6. The fiber surface structure, characterized by DCH18C6 molecules loosely entangled with polymer chains, allowed for the rapid adsorption of Sr ions at an adsorption rate of approximately 100-times higher than that of a commercially available Sr-selective resin (Sr Resin ® ). (author)

  1. Measurement and simulation of partial discharge in oil impregnated pressboard with an electrical aging process

    International Nuclear Information System (INIS)

    Li, Junhao; Si, Wenrong; Yao, Xiu; Li, Yanming

    2009-01-01

    The continuous test on oil impregnated pressboard insulation with internal void defect was developed and the phase resolved partial discharge (PRPD) pattern of partial discharge (PD) signals during the electrical aging process was measured. Two different void structures which have different void volume were used in this experiment. It shows that the PD pattern could be classified into five stages and a great diversity in the first four stages is observed. The larger void volume leads to larger PD magnitude. The computer numerical simulation model which is based on a physical discharge process was used and the causes of PD pattern change were interpreted by comparison with computer numerical simulation results. The initial values and change tendency of gas pressure and surface conductivity were determined through experiment. The model parameters in different stages have been studied as well as the insight into the physical changes in the void during electrical aging. The results provide rules for the identification of the electrical aging stage through the partial discharge measurements

  2. Behavioral Responses of the Bed Bug to Permethrin-Impregnated ActiveGuard™ Fabric

    Directory of Open Access Journals (Sweden)

    Scott A. Harrison

    2013-06-01

    Full Text Available ActiveGuard™ Mattress Liners have been used to control house dust mites, and they also are commercially available as an integrated pest management tool for use against bed bugs (Cimex lectularius. The aim of our study was to evaluate responses of numerous populations of the bed bug to the permethrin-impregnated fabric, with particular regard to contact toxicity, repellency, and feeding inhibition. Continuous exposure to ActiveGuard fabric resulted in rapid intoxication for three of four populations, with 87 to 100% of moderately pyrethroid-resistant and susceptible bed bugs succumbing by 1 d. In comparison, a highly resistant population reached 22% mortality at 10 d. Video data revealed that bed bugs readily traversed ActiveGuard fabric and spent a considerable amount of time moving about and resting on it during a 12-h period. ActiveGuard fabric was non-repellent to bed bugs from five tested populations. Furthermore, significantly fewer bed bugs successfully fed to repletion through ActiveGuard fabric than through blank fabric for the five populations. With just 30 min of feeding exposure, mortality ranged from 4% to 83%, depending upon the bed bug strain. These laboratory studies indicate that ActiveGuard liners adversely affected bed bugs from diverse populations.

  3. Removal of fluoride from water using a novel sorbent lanthanum-impregnated bauxite.

    Science.gov (United States)

    Vivek Vardhan, C M; Srimurali, M

    2016-01-01

    A novel sorbent, Lanthanum-Impregnated Bauxite (LIB), was prepared to remove fluoride from water. To understand the surface chemical composition and morphology, LIB was characterized using X-ray diffraction and scanning electron microscopy techniques. Experiments were performed to evaluate the sorption potential, dose of sorbent, kinetics, equilibrium sorption capacity, pH and influence of anions for defluoridation by LIB. Equilibrium isothermal studies were conducted to model the sorption and regeneration studies were carried out to evaluate the reusability of LIB. The results showed that LIB, at a dose of 2 g/L could remove 99 % of fluoride from an initial concentration of 20 mgF/L. Kinetic studies revealed the best fit of pseudo second order model. The sorption followed Langmuir isotherm model and the maximum sorption capacity of LIB for removal of fluoride was found to be 18.18 mg/g. Naturally occurring pH of water was found to be favorable for sorption. Usually occurring anions in water except nitrates influenced sorption of fluoride by LIB.

  4. Mobility of Yield-Stress Fluids on Lubricant-Impregnated Surface

    Science.gov (United States)

    Rapoport, Leonid; Solomon, Brian; Varanasi, Kripa; Varanasi Research Group Team

    2017-11-01

    Assuring the flow of yield-stress fluids is an essential problem for various industries such as consumer products, health care, and energy. Elimination of wall-induced pinning forces can potentially save power and cleaning costs as well as enable the flow of yield-stress fluids in channels previously considered too narrow. Lubricant-Impregnated Surfaces (LIS) have been demonstrated to change the dynamic behavior of yield-stress fluids and enable them to move as bulk without shearing at all. However, despite the wide applicability of this technology and its general appeal, the fundamental principles governing the performance of yield stress fluids on LIS have not yet been fully explained. In this work, we explore the mobility of yield stress fluids on a wide range of LIS, and explain the connection between macroscale behavior and the microscale properties of the LIS. Specifically, we show a striking difference in mobility between an LIS that contains a lubricant which fully spreads on the rough micro-features of the surface, and an LIS that contains a lubricant which only imbibes these features but does spread over them

  5. The study of cellulosic fabrics impregnated with porphyrin compounds for use as photo-bactericidal polymers

    Energy Technology Data Exchange (ETDEWEB)

    Rahimi, Rahmatollah, E-mail: rahimi_rah@iust.ac.ir [Bioinorganic Chemistry Laboratory, Department of Chemistry, Iran University of Science and Technology, Tehran 16846-13114 (Iran, Islamic Republic of); Fayyaz, Fatemeh [Bioinorganic Chemistry Laboratory, Department of Chemistry, Iran University of Science and Technology, Tehran 16846-13114 (Iran, Islamic Republic of); Rassa, Mehdi [Department of Biology, Faculty of Science, University of Guilan, Rasht (Iran, Islamic Republic of)

    2016-02-01

    In the present work, we report on the preparation of cellulosic fabrics bearing two types of photo-sensitizers in order to prepare efficient polymeric materials for antimicrobial applications. The obtained porphyrin-grafted cellulosic fabrics were characterized by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, diffuse reflectance UV–Vis (DRUV) spectroscopy, thermo-gravimetric analysis (TG) and scanning electron microscopy (SEM). Antimicrobial activity of the prepared porphyrin-cellulose was tested under visible light irradiation against Staphylococcus aureus, Pseudomunas aeroginosa and Escherichia coli. In addition, the effect of two parameters on photo-bactericidal activity of treated fibers was studied: illumination time and concentration of photosensitizers (PS). - Highlights: • Cellulosic fabrics were impregnated with various concentrations of porphyrins (TAPP and its zinc ion complex). • The products were characterized by ATR-FTIR, DRUV, SEM and TG. • The photo-antibacterial activity of products was determined against S. aureus, P. aeroginosa and E. coli. • The effect of two parameters were studied on photoinactivation of treated fibers: illumination time and concentration of PS.

  6. Resin-Impregnated Carbon Ablator: A New Ablative Material for Hyperbolic Entry Speeds

    Science.gov (United States)

    Esper, Jaime; Lengowski, Michael

    2012-01-01

    Ablative materials are required to protect a space vehicle from the extreme temperatures encountered during the most demanding (hyperbolic) atmospheric entry velocities, either for probes launched toward other celestial bodies, or coming back to Earth from deep space missions. To that effect, the resin-impregnated carbon ablator (RICA) is a high-temperature carbon/phenolic ablative thermal protection system (TPS) material designed to use modern and commercially viable components in its manufacture. Heritage carbon/phenolic ablators intended for this use rely on materials that are no longer in production (i.e., Galileo, Pioneer Venus); hence the development of alternatives such as RICA is necessary for future NASA planetary entry and Earth re-entry missions. RICA s capabilities were initially measured in air for Earth re-entry applications, where it was exposed to a heat flux of 14 MW/sq m for 22 seconds. Methane tests were also carried out for potential application in Saturn s moon Titan, with a nominal heat flux of 1.4 MW/sq m for up to 478 seconds. Three slightly different material formulations were manufactured and subsequently tested at the Plasma Wind Tunnel of the University of Stuttgart in Germany (PWK1) in the summer and fall of 2010. The TPS integrity was well preserved in most cases, and results show great promise.

  7. Exceptional Anti-Icing Performance of Self-Impregnating Slippery Surfaces.

    Science.gov (United States)

    Stamatopoulos, Christos; Hemrle, Jaroslav; Wang, Danhong; Poulikakos, Dimos

    2017-03-22

    A heat exchange interface at subzero temperature in a water vapor environment exhibits high probability of frost formation due to freezing condensation, a factor that markedly decreases the heat transfer efficacy due to the considerable thermal resistance of ice. Here we report a novel strategy to delay ice nucleation on these types of solid-water vapor interfaces. With a process-driven mechanism, a self-generated liquid intervening layer immiscible to water is deposited on a textured superhydrophobic surface and acts as a barrier between the water vapor and the solid substrate. This liquid layer imparts remarkable slippery conditions resulting in high mobility of condensing water droplets. A large increase of the ensuing ice coverage time is shown compared to the cases of standard smooth hydrophilic or textured superhydrophobic surfaces. During deicing of these self-impregnating surfaces we show an impressive tendency of ice fragments to skate expediting defrosting. Robustness of such surfaces is also demonstrated by operating them under subcooling for at least 490 h without a marked degradation. This is attributed to the presence of the liquid intervening layer, which protects the substrate from hydrolyzation, enhancing longevity and sustaining heat transfer efficiency.

  8. Antibacterial property of Ag nanoparticle-impregnated N-doped titania films under visible light

    Science.gov (United States)

    Wong, Ming-Show; Chen, Chun-Wei; Hsieh, Chia-Chun; Hung, Shih-Che; Sun, Der-Shan; Chang, Hsin-Hou

    2015-07-01

    Photocatalysts produce free radicals upon receiving light energy; thus, they possess antibacterial properties. Silver (Ag) is an antibacterial material that disrupts bacterial physiology. Our previous study reported that the high antibacterial property of silver nanoparticles on the surfaces of visible light-responsive nitrogen-doped TiO2 photocatalysts [TiO2(N)] could be further enhanced by visible light illumination. However, the major limitation of this Ag-TiO2 composite material is its durability; the antibacterial property decreased markedly after repeated use. To overcome this limitation, we developed TiO2(N)/Ag/TiO2(N) sandwich films in which the silver is embedded between two TiO2(N) layers. Various characteristics, including silver and nitrogen amounts, were examined in the composite materials. Various analyses, including electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and ultraviolet-visible absorption spectrum and methylene blue degradation rate analyses, were performed. The antibacterial properties of the composite materials were investigated. Here we revealed that the antibacterial durability of these thin films is substantially improved in both the dark and visible light, by which bacteria, such as Escherichia coli, Streptococcus pyogenes, Staphylococcus aureus, and Acinetobacter baumannii, could be efficiently eliminated. This study demonstrated a feasible approach to improve the visible-light responsiveness and durability of antibacterial materials that contain silver nanoparticles impregnated in TiO2(N) films.

  9. Mechanical and dielectric characterization of hemp fibre reinforced polypropylene (HFRPP by dry impregnation process

    Directory of Open Access Journals (Sweden)

    2010-03-01

    Full Text Available Natural fibres such as jute, coir, sisal, bamboo and pineapple are known to have high specific strength and can be effectively used in composites in various applications. The use of hemp fibres to reinforce the polymer aroused great interest and expectations amongst scientists and materials engineers. In this paper, composites with isotactic polypropylene (iPP matrix and hemp fibres were studied. These materials were manufactured via the patented FIBROLINE process based on the principle of the dry impregnation of a fibre assembly with a thermoplastic powder (iPP, using an alternating electric field. The aim of this paper is to show the influence of fibre/matrix interfaces on dielectric properties coupled with mechanical behaviours. Fibres or more probably the fibre/matrix interfaces allow the diffusion of electric charges and delocalise the polarisation energy. In this way, damages are limited during mechanical loading and the mechanical properties of the composites increase. The structure of composite samples was investigated by X-ray and FTIR analysis. The mechanical properties were analysed by quasistatic and dynamic tests. The dielectric investigations were carried out using the SEMME (Scanning Electron Microscope Mirror Effect method coupled with the measurement of the induced current (ICM.

  10. Antimicrobial effect of silver-impregnated cellulose: potential for antimicrobial therapy

    Directory of Open Access Journals (Sweden)

    Ostler Erik

    2009-12-01

    Full Text Available Abstract Background Silver has long been known to have antimicrobial activity. To incorporate this property into multiple applications, a silver-impregnated cellulose (SIC with low cytotoxicity to human cells was developed. SIC differs from other silver treatment methods in that the leaching of silver particles is non-existent and the release of ionic silver is highly controlled. Results Candida albicans, Micrococcus luteu, Pseudomonas putida, and Escherichia coli were used for antimicrobial testing. No microbial cells were able to grow in the presence of SIC at concentrations above 0.0035 Ag w/v %. Even at a concentration of 0.00035 Ag w/v %, P. putida and M. luteu failed to grow, and C. albicans and E. coli exhibited diminished growth. To determine the cytotoxic effect of silver on human cells, five different concentrations of SIC were tested on human fibroblasts. In SIC concentrations of 0.035 Ag w/v % and below, no cytotoxicity was observed. Conclusion The optimal concentration of SIC for a broad range of anti-microbial activity and low or negligible cytotoxicity was 0.0035 Ag w/v %. Although the highly controlled releasing characteristics of SIC would prove a substantial improvement over current technologies, further investigation for genotoxicity and other biocompatibility test will be required.

  11. Antibacterial and UV protective properties of polyamide fabric impregnated with TiO2/Ag nanoparticles

    Directory of Open Access Journals (Sweden)

    Milošević Milica

    2015-01-01

    Full Text Available The possibility of in situ photoreduction of Ag+ ions using colloidal TiO2 nanoparticles deposited on the surface of polyamide fabric in the presence of amino acid alanine and methyl alcohol is discussed. The presence of TiO2/Ag nanoparticles on the polyamide fabric was confirmed by FESEM and ICP analyses. Antibacterial activity of the fabric was tested against Gram-negative bacterium Escherichia coli and Gram-positive bacterium Staphylococcus aureus. Fabricated TiO2/Ag nanoparticles on the surface of polyamide fabric provided maximum bacterial reduction and thus, excellent antibacterial activity. In spite of silver leaching from the fabric during washing, impregnated polyamide fabric preserved maximum reduction of Escherichia coli colonies. Antibacterial activity against Staphylococcus aureus slightly decreased after ten washing cycles, but still antibacterial activity can be considered as satisfactory. In addition, the presence of TiO2/Ag nanoparticles ensured better UV protection efficiency which belongs to very good UV protection category. [Projekat Ministarstva nauke Republike Srbije, br. 45020 i br. 172056

  12. Antimicrobial effect of silver-impregnated cellulose: potential for antimicrobial therapy.

    Science.gov (United States)

    Kim, Juyoung; Kwon, Soonjo; Ostler, Erik

    2009-12-04

    Silver has long been known to have antimicrobial activity. To incorporate this property into multiple applications, a silver-impregnated cellulose (SIC) with low cytotoxicity to human cells was developed. SIC differs from other silver treatment methods in that the leaching of silver particles is non-existent and the release of ionic silver is highly controlled. Candida albicans, Micrococcus luteu, Pseudomonas putida, and Escherichia coli were used for antimicrobial testing. No microbial cells were able to grow in the presence of SIC at concentrations above 0.0035 Ag w/v %. Even at a concentration of 0.00035 Ag w/v %, P. putida and M. luteu failed to grow, and C. albicans and E. coli exhibited diminished growth. To determine the cytotoxic effect of silver on human cells, five different concentrations of SIC were tested on human fibroblasts. In SIC concentrations of 0.035 Ag w/v % and below, no cytotoxicity was observed. The optimal concentration of SIC for a broad range of anti-microbial activity and low or negligible cytotoxicity was 0.0035 Ag w/v %. Although the highly controlled releasing characteristics of SIC would prove a substantial improvement over current technologies, further investigation for genotoxicity and other biocompatibility test will be required.

  13. Photocatalytic Degradation of Methylene Blue Using TiO2 Impregnated Diatomite

    Directory of Open Access Journals (Sweden)

    Ranfang Zuo

    2014-01-01

    Full Text Available Nano-TiO2 showed a good catalytic activity, but it is easy to agglomerate, resulting in the reduction or even complete loss of photocatalytic activity. The dispersion of TiO2 particles on porous materials was a potential solution to this problem. Diatomite has high specific surface and absorbability because of its particular shell structure. Thus, TiO2/diatomite composite, prepared by loading TiO2 on the surface of diatomite, was a good photocatalyst, through absorbing organic compounds with diatomite and degrading them with TiO2. Scanning electron microscopy (SEM, energy dispersive spectrum (EDS, X-ray diffraction (XRD, chemical analysis, and Fourier transform infrared spectrometry (FTIR indicated that TiO2 was impregnated well on the surface of diatomite. Furthermore, TiO2/diatomite was more active than nano-TiO2 for the degradation of methylene blue (MB in solution. MB at concentrations of 15 and 35 ppm can be completely degraded in 20 and 40 min, respectively.

  14. Antibacterial effects of the povidone-iodine vacuum impregnation technique in expanded polytetrafluoroethylene augmentation rhinoplasty.

    Science.gov (United States)

    Lee, Jung Min; Lee, Joong Seob; Kim, Dong-Kyu; Lee, Jun Ho; Park, Hae Sang; Lee, Ho Jun; Bae, Sung Hee; Jang, Ji Su; Lee, Jae Jun; Park, Chan Hum

    2016-06-01

    Expanded polytetrafluoroethylene (e-PTFE) is a popular graft material for augmentation rhinoplasty. Gore-Tex and Surgiform are two types of e-PTFE; Surgiform has thicker fibrils and is more compact than Gore-Tex. We conducted an ex vivo study to evaluate the ability of povidone-iodine (PVP-I) vacuum pretreatment to prevent infection with these two types of e-PTFE. Gore-Tex and Surgiform specimens were cut into 2-mm(3) pieces, which were separated into two groups. One group for each e-PTFE was disinfected with vacuum PVP-I impregnation and the other group was not disinfected. Using the pieces of implant material, swabs were obtained from the nasal cavities of 20 healthy adults, and the specimens were incubated on agar plates and viewed by scanning electron microscopy (SEM). We found that PVP-I treatment significantly reduced the bacterial colony counts in both the Gore-Tex and Surgiform groups. In the SEM images, bacterial colonies were observed both inside and outside the untreated Gore-Tex; on the untreated Surgiform, they were found primarily on the surface. Few bacteria were detected in the PVP-I-treated Gore-Tex and Surgiform groups. Our findings suggest that PVP-I pretreatment can reduce the risk of infection associated with e-PTFE.

  15. Phenolic Impregnated Carbon Ablators (PICA) as Thermal Protection Systems for Discovery Missions

    Science.gov (United States)

    Tran, Huy K.; Johnson, Christine E.; Rasky, Daniel J.; Hui, Frank C. L.; Hsu, Ming-Ta; Chen, Timothy; Chen, Y. K.; Paragas, Daniel; Kobayashi, Loreen

    1997-01-01

    This paper presents the development of the light weight Phenolic Impregnated Carbon Ablators (PICA) and its thermal performance in a simulated heating environment for planetary entry vehicles. The PICA material was developed as a member of the Light Weight Ceramic Ablators (LCA's), and the manufacturing process of this material has since been significantly improved. The density of PICA material ranges from 14 to 20 lbm/ft(exp 3), having uniform resin distribution with and without a densified top surface. The thermal performance of PICA was evaluated in the Ames arc-jet facility at cold wall heat fluxes from 375 to 2,960 BtU/ft(exp 2)-s and surface pressures of 0.1 to 0.43 atm. Heat loads used in these tests varied from 5,500 to 29,600 BtU/ft(exp 2) and are representative of the entry conditions of the proposed Discovery Class Missions. Surface and in-depth temperatures were measured using optical pyrometers and thermocouples. Surface recession was also measured by using a template and a height gage. The ablation characteristics and efficiency of PICA are quantified by using the effective heat of ablation, and the thermal penetration response is evaluated from the thermal soak data. In addition, a comparison of thermal performance of standard and surface densified PICA is also discussed.

  16. Development of a Tool Condition Monitoring System for Impregnated Diamond Bits in Rock Drilling Applications

    Science.gov (United States)

    Perez, Santiago; Karakus, Murat; Pellet, Frederic

    2017-05-01

    The great success and widespread use of impregnated diamond (ID) bits are due to their self-sharpening mechanism, which consists of a constant renewal of diamonds acting at the cutting face as the bit wears out. It is therefore important to keep this mechanism acting throughout the lifespan of the bit. Nonetheless, such a mechanism can be altered by the blunting of the bit that ultimately leads to a less than optimal drilling performance. For this reason, this paper aims at investigating the applicability of artificial intelligence-based techniques in order to monitor tool condition of ID bits, i.e. sharp or blunt, under laboratory conditions. Accordingly, topologically invariant tests are carried out with sharp and blunt bits conditions while recording acoustic emissions (AE) and measuring-while-drilling variables. The combined output of acoustic emission root-mean-square value (AErms), depth of cut ( d), torque (tob) and weight-on-bit (wob) is then utilized to create two approaches in order to predict the wear state condition of the bits. One approach is based on the combination of the aforementioned variables and another on the specific energy of drilling. The two different approaches are assessed for classification performance with various pattern recognition algorithms, such as simple trees, support vector machines, k-nearest neighbour, boosted trees and artificial neural networks. In general, Acceptable pattern recognition rates were obtained, although the subset composed by AErms and tob excels due to the high classification performances rates and fewer input variables.

  17. Mechanical, dielectric, and physicochemical properties of impregnating resin based on unsaturated polyesterimides

    Science.gov (United States)

    Fetouhi, Louiza; Petitgas, Benoit; Dantras, Eric; Martinez-Vega, Juan

    2017-10-01

    This work aims to characterize the dielectric and the mechanical properties of a resin based on an unsaturated polyesterimide diluted in methacrylate reactive diluents used in the impregnation of rotating machines. The broadband dielectric spectrometry and the dynamic mechanical analysis were used to quantify the changes in dielectric and mechanical properties of the network PEI resin, as a function of temperature and frequency. The network characterizations highlight the presence of two main relaxations, α and α', confirmed by the differential scanning calorimetry analysis, showing the complexity of the chemical composition of this resin. The dielectric spectroscopy shows a significant increase in the dielectric values due to an increase of the material conductivity, while the mechanical spectroscopy shows an important decrease of the polymer rigidity and viscosity expressed by an important decrease in the storage modulus. The PEI resin shows a high reactivity when it is submitted in successive heating ramps, which involves in a post-cross-linking reaction. Contribution to the topical issue "Electrical Engineering Symposium (SGE 2016)", edited by Adel Razek

  18. Effect of drying conditions on the physical properties of impregnated orange peel

    Directory of Open Access Journals (Sweden)

    K. Manjarres-Pinzon

    2013-09-01

    Full Text Available Orange peel represents approximately 30-40 g/100g of the fresh fruit weight and could be used to develop value-added products. Hence, this study aims to evaluate the effects of drying conditions on the physical properties of orange peel impregnated with sucrose solution. The response surface method (RSM was used to optimize two parameters: drying temperature (35-55 ºC and air flow rate (2-3 m/s. The measured responses used to determine the effect of dying process conditions were: moisture content. drying time. total soluble solids. color and hardness. The dried orange peels from the optimal process were subjected to a sensory test by 60 consumers. The optimum conditions for the drying of orange peels were determined to obtain minimum hardness, moisture content and drying time for a w values below 0.6. The optimum conditions were found to be a dying temperature of 52.3 ºC and air flow rate of 2.0 m/s. At this point, drying time, hardness and moisture content were found to be 20 h, 78.4 N and 7.6%, respectively. The sensory results showed that consumers aged over 30 years old accepted well the dried orange peel.

  19. Isothermal relaxation current and microstructure changes of thermally aged polyester films impregnated by epoxy resin

    Science.gov (United States)

    Jiang, Xiongwei; Sun, Potao; Peng, Qingjun; Sima, Wenxia

    2018-01-01

    In this study, to understand the effect of thermal aging on polymer films degradation, specimens of polyester films impregnated by epoxy resin with different thermal aging temperatures (80 and 130 °C) and aging times (500, 1600, 2400 and 3000 h) are prepared, then charge de-trapping properties of specimens are investigated via the isothermal relaxation current (IRC) measurement, the distributions of trap level and its corresponding density are obtained based on the modified IRC model. It is found that the deep trap density increases remarkably at the beginning of thermal aging (before 1600 h), but it decreases obviously as the aging degree increases. At elevated aging temperature and, in particular considering the presence of air gap between two-layer insulation, the peak densities of deep traps decrease more significant in the late period of aging. It can be concluded that it is the released energy from de-trapping process leads to the fast degradation of insulation. Moreover, after thermal aging, the microstructure changes of crystallinity and molecular structures are analyzed via the x-ray diffraction experiment and Fourier transform infrared spectrometer. The results indicate that the variation of the deep trap density is closely linked with the changes of microstructure, a larger interface of crystalline/amorphous phase, more defects and broken chains caused by thermal aging form higher deep trap density stored in the samples.

  20. Mechanical and Thermal Properties of Epoxy Composites Containing Zirconium Oxide Impregnated Halloysite Nanotubes

    Directory of Open Access Journals (Sweden)

    Moon il Kim

    2017-12-01

    Full Text Available Liquid epoxy resins have received much attention from both academia and the chemical industry as eco-friendly volatile organic compound (VOC-free alternatives for applications in coatings and adhesives, especially in those used in households. Epoxy resins show high chemical resistance and high creep resistance. However, due to their brittleness and lack of thermal stability, additional fillers are needed for improving the mechanical and thermal properties. Halloysite nanotubes (HNTs are naturally abundant, inexpensive, and eco-friendly clay minerals that are known to improve the mechanical and thermal properties of epoxy composites after suitable surface modification. Zirconium is well known for its high resistance to heat and wear. In this work, zirconium oxide-impregnated HNTs (Zr/HNTs were added to epoxy resins to obtain epoxy composites with improved mechanical and thermal properties. Zr/HNTs were characterized by field-emission transmission electron microscopy, transmission electron microscopy with energy-dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Changes in the thermal properties of the epoxy composites were characterized by thermo mechanical analysis and differential scanning calorimetry. Furthermore, flexural properties of the composites were analyzed using a universal testing machine.

  1. Wood-polymer composite: physical and mechanical properties of some wood species impregnated with styrene and methyl methacrylate

    OpenAIRE

    Stolf,Denise Ortigosa; Lahr,Francisco Antonio Rocco

    2004-01-01

    This study aimed to demonstrate the feasibility of obtaining wood-polymer composites (WPC) displaying a performance superior to that of untreated wood from reforested genera. To this end, wood samples of Pine (Pinus caribaea) and Eucalyptus (Eucalyptus grandis), whose density is compatible with this process, were impregnated with the polymeric monomers styrene and methyl methacrylate, using benzoyl peroxide to initiate the polymerization process forming free radicals. The vacuum-pressure meth...

  2. Silver Toxicity With the Use of Silver-Impregnated Dressing and Wound Vacuum-Assisted Closure in an Immunocompromised Patient

    OpenAIRE

    LaRiviere, Cabrini A.; Goldin, Adam B.; Avansino, Jeffrey

    2011-01-01

    Silver-containing topical agents are used to help prevent infectious complications in wound therapy. Toxicity from topical silver agent exposure was initially reported in 1975 and was clinically characterized by granulocytopenia. Currently, the data regarding potential toxicity associated with silver-impregnated devices are limited. A 23-year-old patient receiving chemotherapy for acute lymphoblastic leukemia presented with necrotizing fasciitis of the abdominal wall and scrotum from a Crohn ...

  3. Electrochemical Removal of NOx-Gasses by Use of LSM-Cathodes Impregnated with a NOx Storage Compound

    DEFF Research Database (Denmark)

    Traulsen, Marie Lund; Kammer Hansen, Kent

    2010-01-01

    Electrochemical decomposition of NO on La0.85Sr0.15MnO3-- Ce0.90Gd0.10O1.95electrodes with and without KNO3 impregnation is investigated. The KNO3 is added as this compound is expected to work as a NOx-storage compound. Measurements are made in the temperature range 300-400 degree C and in three...

  4. HZSM-5 CATALYST FOR CRACKING PALM OIL TO BIODIESEL: A COMPARATIVE STUDY WITH AND WITHOUT PT AND PD IMPREGNATION

    OpenAIRE

    Agus Budianto; Danawati Hari Prajitno; Achmad Roesyadi; Kusno Budhikarjono

    2014-01-01

    The Needs of healthy environment and green energy poses a great demand for alternative energy. Biofuel is one of the alternative energy products that are environmentally friendly. Biofuel can be made from plant oils, especially palm oil. Cracking of palm oil into biofuel is constrained by the availability of catalysts. Moreover the available catalyst still gives a low yield. This research aims to study the effect of Pt and Pd impregnation into HZSM-5 catalyst on the catalytic properties. Anot...

  5. IMPREGNATION OF 2-MERCAPTOBENZOTHIAZOLE ON DIATOMACEOUS EARTH AND ITS APPLICATION AS MERCURY(II) ADSORBEN IN AQUEOUS MEDIUM

    OpenAIRE

    Purwanto, Agung; Narsito, Narsito

    2010-01-01

    An adsorbent was prepared by impregnating 2-mercaptobenzo-thiazole onto polystirene treated diatomaceous earth support. This adsorbent was then applied to adsorb mercury(II) in aqueous medium. The mercury(II) adsorption characteristics of the adsorbent was studied by the use of the original diatomaceous earth as reference. Interaction of mercury(II) and both of diatomaceous earth as well as MBT-diatomaceous were performed in a aqueous batch system to include the following parameters: (a)...

  6. Frequency of change of chlorhexidine-impregnated gel dressings for central venous catheters in critically ill patients

    OpenAIRE

    Dolci, Mariana Ehmke; Margatho, Amanda Salles; Silveira, Renata Cristina de Campos Pereira

    2017-01-01

    Abstract Objectives: To identify the frequency of change of chlorhexidine-impregnated gel dressings applied in central venous catheter insertion sites, describe reasons for dressing changes, and identify the amount of dressings used per adult patients admitted to an intensive care unit. Methods: Descriptive study consisting of daily record of occurrence evaluation, reason for dressing change and quantity used per patient, between April and December 2014. Descriptive statistical analysis was...

  7. Reduction of Bromate by Cobalt-Impregnated Biochar Fabricated via Pyrolysis of Lignin Using CO2 as a Reaction Medium.

    Science.gov (United States)

    Cho, Dong-Wan; Kwon, Gihoon; Ok, Yong Sik; Kwon, Eilhann E; Song, Hocheol

    2017-04-19

    In this study, pyrolysis of lignin impregnated with cobalt (Co) was conducted to fabricate a Co-biochar (i.e., Co/lignin biochar) for use as a catalyst for bromate (BrO 3 - ) reduction. Carbon dioxide (CO 2 ) was employed as a reaction medium in the pyrolysis to induce desired effects associated with CO 2 ; (1) the enhanced thermal cracking of volatile organic compounds (VOCs) evolved from the thermal degradation of biomass, and (2) the direct reaction between CO 2 and VOCs, which resulted in the enhanced generation of syngas (i.e., H 2 and CO). This study placed main emphases on three parts: (1) the role of impregnated Co in pyrolysis of lignin in the presence of CO 2 , (2) the characterization of Co/lignin biochar, and (3) evaluation of catalytic capability of Co-lignin biochar in BrO 3 - reduction. The findings from the pyrolysis experiments strongly evidenced that the desired CO 2 effects were strengthened due to catalytic effect of impregnated Co in lignin. For example, the enhanced generation of syngas from pyrolysis of Coimpregnated lignin in CO 2 was more significant than the case without Co impregnation. Moreover, pyrolysis of Coimpregnated lignin in CO 2 led to production of biochar of which surface area (599 m 2 g -1 ) is nearly 100 times greater than the biochar produced in N 2 (6.6 m 2 g -1 ). Co/lignin biochar produced in CO 2 also showed a great performance in catalyzing BrO 3 - reduction as compared to the biochar produced in N 2 .

  8. The effect of thyme oil low-density polyethylene impregnated pellets in polylactic acid sachets on storage quality of ready-to-eat avocado

    CSIR Research Space (South Africa)

    Bill, M

    2018-01-01

    Full Text Available After earlier promising results for the control of anthracnose in avocado fruit by thyme vapours, our studies were extended to commercial use in tray packs. The effect of thyme oil low-density polyethylene impregnated pellets (TO...

  9. Study of the efficacy of a Wheaton coated bottle with permethrin and deltamethrin in laboratory conditions and a WHO impregnated paper with bendiocarb in field conditions

    Directory of Open Access Journals (Sweden)

    Nazaire Aïzoun

    2014-06-01

    Conclusions: The day storage and the number of times that a WHO impregnated paper and a CDC coated bottle maintained their efficacy are useful in the assessment of insecticide vectors susceptibility tests.

  10. Managing Coil Epoxy Vacuum Impregnation Systems at the Manufacturing Floor Level To Achieve Ultimate Properties in State-of-the-Art Magnet Assemblies

    CERN Document Server

    Hubrig, Jeffrey G

    2005-01-01

    Liquid epoxy resin impregnation systems remain a state-of-the-art polymer material for vacuum and vacuum/pressure impregnation applications in the manufacture of both advanced and conventional coil winding configurations. Epoxy resins inherent latitude in processing parameters accounts for their continued popularity in engineering applications, but also for the tendency to overlook or misinterpret the requisite processing parameters on the manufacturing floor. Resin system impregnation must be managed in detail in order to achieve device life cycle reliability. This closer look reveals how manufacturing floor level management of material acceptance, handling and storage, pre- and post- impregnation processing and cure can be built into a manufacturing plan to increase manufacturing yield, lower unit cost and ensure optimum life cycle performance of the coil.

  11. TiO2-Impregnated Porous Silica Tube and Its Application for Compact Air- and Water-Purification Units

    Directory of Open Access Journals (Sweden)

    Tsuyoshi Ochiai

    2015-09-01

    Full Text Available A simple, convenient, reusable, and inexpensive air- and water-purification unit including a one-end sealed porous amorphous-silica (a-silica tube coated with TiO2 photocatalyst layers has been developed. The porous a-silica layers were formed through outside vapor deposition (OVD. TiO2 photocatalyst layers were formed through impregnation and calcination onto a-silica layers. The resulting porous TiO2-impregnated a-silica tubes were evaluated for air-purification capacity using an acetaldehyde gas decomposition test. The tube (8.5 mm e.d. × 150 mm demonstrated a 93% removal rate for high concentrations (ca. 300 ppm of acetaldehyde gas at a single-pass condition with a 250 mL/min flow rate under UV irradiation. The tube also demonstrated a water purification capacity at a rate 2.0 times higher than a-silica tube without TiO2 impregnation. Therefore, the tubes have a great potential for developing compact and in-line VOC removal and water-purification units.

  12. Silver toxicity with the use of silver-impregnated dressing and wound vacuum-assisted closure in an immunocompromised patient.

    Science.gov (United States)

    Lariviere, Cabrini A; Goldin, Adam B; Avansino, Jeffrey

    2011-03-01

    Silver-containing topical agents are used to help prevent infectious complications in wound therapy. Toxicity from topical silver agent exposure was initially reported in 1975 and was clinically characterized by granulocytopenia. Currently, the data regarding potential toxicity associated with silver-impregnated devices are limited. A 23-year-old patient receiving chemotherapy for acute lymphoblastic leukemia presented with necrotizing fasciitis of the abdominal wall and scrotum from a Crohn disease-related psoas-enteric fistula. Surgical debridement of the soft-tissue and abdominal musculature was performed to the peritoneum. Silver-containing foam sponges and wound vacuum-assisted closure were applied directly to the peritoneum 2 weeks after initial debridement. Subsequently, the patient developed leukopenia, and workup revealed the serum silver level was 4 times normal level. Silver-impregnated sponges were discontinued and silver-free sponges and wound vacuum-assisted closure therapy resumed, followed by leukopenia resolution. Silver toxicity associated with routine application of silver-impregnated sponges has not been previously reported.

  13. Textural and chemical characterizations of adsorbent prepared from palm shell by potassium hydroxide impregnation at different stages.

    Science.gov (United States)

    Guo, Jia; Lua, Aik Chong

    2002-10-15

    Preparation and characterization of activated carbon from palm shell, a carbonaceous agricultural solid waste, by potassium hydroxide treatment at different stages were studied. The effects of activation temperature and chemical to sample ratio on the characteristics of the activated carbon were investigated. Fixed-bed adsorption of sulfur dioxide (SO(2)) gas was carried out to evaluate the adsorptive capacity of the samples. Desorption tests were conducted to verify the occurrence of chemisorption due to some surface functional groups or of chemical reaction between SO(2) and KOH. It was found that pre-impregnation of raw palm shell was involved in replacement of some hydrogen ions with potassium ions to form cross-linked complexes, which retarded the tar formation during carbonization, resulting in a relatively high yield. Moreover, these potassium ions accelerated the reaction as catalysts during gasification of chars by carbon dioxide. For chars with mid-impregnation, potassium hydroxide acted in two ways: (i) formation of metallic potassium by dehydration and (ii) conversion into potassium carbonate. Metallic potassium intercalated to the carbon matrix accounted for pore development and potassium carbonate layer prevented the sample from over burn-off. Post-impregnation of final products modified the textural characteristics of the sample as some pore entrances were blocked by chemicals. However, potassium hydroxide enhanced the amount of SO(2) uptaken via formation of potassium sulfite.

  14. Selection of scheme for impregnation of sodium titanate onto ion-exchange fibers for radioactive strontium removal from seawater

    International Nuclear Information System (INIS)

    Umino, Satoshi; Kono, Michitaka; Kawai-Noma, Shigeko; Umeno, Daisuke; Saito, Kyoichi; Fujiwara, Kunio; Sugo, Takanobu

    2014-01-01

    For the removal of radioactive strontium dissolved in seawater in the harbor near the Fukushima Daiichi Nuclear Power Plant, two kinds of sodium-titanate (ST) -impregnated fiber were prepared by means of radiation-induced graft polymerization and subsequent chemical modifications: one was ST-impregnated fiber, or SSS-ST fiber, originating from cation-exchange fiber that was prepared by grafting sodium styrene sulfonate (SSS) onto a 6-nylon fiber, and the other was DMAEMA-ST fiber originating from anion-exchange fiber prepared by grafting dimethylaminoethyl methacrylate (DMAEMA) onto 6-nylon fiber. In a batch adsorption mode, these ST-impregnated fibers exhibited a higher removal rate of strontium in seawater than commercially available ST adsorbent (SrTreat) in a granulosus form. At a mass ratio of seawater to fiber of 100, the percentages for the removal of strontium were 86% and 83% for the SSS-ST and DMAEMA fibers, respectively. From the viewpoint of endurance against alkaline conditions in the preparation scheme, the SSS-ST fiber was judged to be feasible for practical use. (author)

  15. High activity PtRu/C catalysts synthesized by a modified impregnation method for methanol electro-oxidation

    International Nuclear Information System (INIS)

    Ma Liang; Liu Changpeng; Liao Jianhui; Lu Tianhong; Xing Wei; Zhang Jiujun

    2009-01-01

    A modified impregnation method was used to prepare highly dispersive carbon-supported PtRu catalyst (PtRu/C). Two modifications to the conventional impregnation method were performed: one was to precipitate the precursors ((NH 4 ) 2 PtCl 6 and Ru(OH) 3 ) on the carbon support before metal reduction; the other was to add a buffer into the synthetic solution to stabilize the pH. The prepared catalyst showed a much higher activity for methanol electro-oxidation than a catalyst prepared by the conventional impregnation method, even higher than that of current commercially available, state-of-the-art catalysts. The morphology of the prepared catalyst was characterized using TEM and XRD measurements to determine particle sizes, alloying degree, and lattice parameters. Electrochemical methods were also used to ascertain the electrochemical active surface area and the specific activity of the catalyst. Based on XPS measurements, the high activity of this catalyst was found to originate from both metallic Ru (Ru 0 ) and hydrous ruthenium oxides (RuO x H y ) species on the catalyst surface. However, RuO x H y was found to be more active than metallic Ru. In addition, the anhydrous ruthenium oxide (RuO 2 ) species on the catalyst surface was found to be less active.

  16. Impregnated-electrode-type liquid metal ion source (IV): Extraction of Si, Ge, Sb by using eutectic alloy

    International Nuclear Information System (INIS)

    Chen, G.; Gotoh, Y.; Tsuji, H.; Ishikawa, J.; Takagi, T.

    1985-01-01

    An impregnated-electrode-type liquid metal ion source has been developed in which a sintered porous tungsten tip is used. There has been an increasing interest in liquid metal ion source to obtain focused ion beams. The focused ion beam can perform three useful process steps: direct-write ion implantation to semiconductor, ion sputtering to make thin films and ion exposure to define resist. It is necessary to extract various ions for this purpose. It is possible to extract ions of Ga, Au, and Ag with impregnated-electrode-type liquid metal ion source. For micro-electronic application, ions of Si, Ge and Sb are desirable for doping, but their high melting points or high vapour pressures prohibit their use in elemental form. The purpose of the present investigation is to fabricate eutectic alloys which can be used in impregnated-electrode-type liquid metal ion source. The authors have been successful to obtain ions of Si, Ge and Sb, and revealed relevant basic ion source parameters such as current-voltage characteristics, mass spectra and life time

  17. Ionic-liquid-impregnated resin for the microwave-assisted solid-liquid extraction of triazine herbicides in honey.

    Science.gov (United States)

    Wu, Lijie; Song, Ying; Hu, Mingzhu; Yu, Cui; Zhang, Hanqi; Yu, Aimin; Ma, Qiang; Wang, Ziming

    2015-09-01

    Microwave-assisted ionic-liquid-impregnated resin solid-liquid extraction was developed for the extraction of triazine herbicides, including cyanazine, metribuzin, desmetryn, secbumeton, terbumeton, terbuthylazine, dimethametryn, and dipropetryn in honey samples. The ionic-liquid-impregnated resin was prepared by immobilizing 1-hexyl-3-methylimidazolium hexafluorophosphate in the microspores of resin. The resin was used as the extraction adsorbent. The extraction and enrichment of analytes were performed in a single step. The extraction time can be shortened greatly with the help of microwave. The effects of experimental parameters including type of resin, type of ionic liquid, mass ratio of resin to ionic liquid, extraction time, amount of the impregnated resin, extraction temperature, salt concentration, and desorption conditions on the extraction efficiency, were investigated. A Box-Behnken design was applied to the selection of the experimental parameters. The recoveries were in the range of 80.1 to 103.4% and the relative standard deviations were lower than 6.8%. The present method was applied to the analysis of honey samples. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Hydrotalcite Catalyst for Hydrocracking Calophyllum inophyllum Oil to Biofuel: A Comparative Study with and without Nickel Impregnation

    Directory of Open Access Journals (Sweden)

    Hafshah Hafshah

    2017-05-01

    Full Text Available This research aims to study the effect of nickel impregnation into hydrotalcite catalyst that use to convert Calophyllum inophyllum oil into biofuel through hydrocracking process. Hydrocracking process was carried out under mild condition (350 °C and 20 bar for two hours in a slurry batch reactor. The adding nickel affected the reaction conversion, yield, and selectivity of gasoil. The process of oxygen removal from the compounds in the oil was characterized by Fourier Transform Infrared Spectroscopy (FTIR, and the compositions of the products were determined by Gas Chromatography-Mass Spectrometry (GC-MS. The results of the study successfully proved that nickel impregnated into hydrotalcite catalyst increased the conversion, yield, and selectivity of gasoil up to 98.57 %, 54.15 %, and 81.31 %, respectively. Copyright © 2017 BCREC Group. All rights reserved Received: 15th November 2016; Revised: 22nd February 2017; Accepted: 22nd February 2017 How to Cite: Hafshah, H., Prajitno, D.H., Roesyadi, A. (2017. Hydrotalcite Catalyst for Hydrocracking Calophyllum inophyllum Oil to Biofuel: A Comparative Study with and without Nickel Impregnation. Bulletin of Chemical Reaction Engineering & Catalysis, 12 (2: 273-280 (doi:10.9767/bcrec.12.2.776.273-280 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.12.2.776.273-280

  19. Effectiveness of dog collars impregnated with 4% deltamethrin in controlling visceral leishmaniasis in Lutzomyia longipalpis (Diptera: Psychodidade: Phlebotominae) populations.

    Science.gov (United States)

    Silva, Rafaella Albuquerque E; Andrade, Andrey José de; Quint, Bruno Beust; Raffoul, Gabriel Elias Salmen; Werneck, Guilherme Loureiro; Rangel, Elizabeth Ferreira; Romero, Gustavo Adolfo Sierra

    2018-03-26

    There is little information on the effect of using deltamethrin-impregnated dog collars for the control of canine visceral leishmaniasis. The objective of this study was to evaluate the effectiveness of the use of 4% deltamethrin-impregnated collars (Scalibor®) in controlling visceral leishmaniasis in Lutzomyia longipalpis by comparing populations in intervention and non-intervention areas. Phlebotomine flies were captured over 30 months in four neighbourhoods with intense visceral leishmaniasis transmission in Fortaleza and Montes Claros. We calculated the rates of domicile infestation, relative abundance of Lu. longipalpis, and Lu. longipalpis distribution in each site, capture location (intra- and peridomestic locations) and area (intervention and non-intervention areas). In the control area in Fortaleza, the relative abundance of Lu. longipalpis was 415 specimens at each capture site, whereas in the intervention area it was 159.25; in Montes Claros, the relative abundance was 5,660 specimens per capture site in the control area, whereas in the intervention area it was 2,499.4. The use of dog collars was associated with a reduction in captured insects of 15% (p = 0.004) and 60% (p < 0.001) in Montes Claros and Fortaleza, respectively. We observed a lower vector abundance in the intervention areas, suggesting an effect of the insecticide-impregnated collars.

  20. Efficacy of an unwaxed dental floss impregnated with 2% chlorhexidine on control of supragingival biofilm: A randomized, clinical trial.

    Science.gov (United States)

    Muniz, Francisco Wilker Mustafa Gomes; da Silva Lima, Heitor; Rösing, Cassiano Kuchenbecker; Martins, Ricardo Souza; Moreira, Maria Mônica Studart Mendes; Carvalho, Rosimary de Sousa

    2018-02-01

    In the present study, we evaluated the antiplaque and antigingivitis efficacy of a dental floss impregnated with 2% chlorhexidine digluconate. Thirty dental students were randomly divided into three groups (n=10): (a) negative control (NC) group, in which no interproximal cleaning was performed; (b) the positive control (PC) group, which used a standard unwaxed dental floss twice daily; and (c) and the test group, which used a unwaxed dental floss impregnated with 2% chlorhexidine twice daily. Six surfaces per tooth were evaluated by the Quigley-Hein plaque index (Turesky modification) at the last appointment (day 15), and testing for the presence of marginal bleeding was performed using the marginal bleeding index (MBI) at both the baseline and last appointments. At day 15, the test group had the lowest mean plaque index (1.04±0.67), showing a statistically-significant difference compared to the NC group (1.40±0.65, Pdental floss impregnated with 2% chlorhexidine showed additional reductions in supragingival interproximal biofilm compared with a conventional unwaxed dental floss, without additional improvement in marginal bleeding. © 2017 John Wiley & Sons Australia, Ltd.

  1. Analysis by non-linear irreversible thermodynamics of compositional and structural changes occurred during air drying of vacuum impregnated apple (cv. Granny smith). Calcium and trehalose effects

    OpenAIRE

    Betoret Valls, María Ester; Betoret Valls, Noelia; CASTAGNINI, JUAN MANUEL; Rocculi, Pietro; DALLA ROSA, MARCO; Fito Maupoey, Pedro

    2015-01-01

    [EN] Apple discs were impregnated with isotonic solutions of sucrose and trehalose with and without calcium addition and after air dried. In the vacuum impregnation experiments, the calcium and the replacement of sucrose by trehalose did not have significant effect on the final volumetric deformation of the samples. During air drying two stages of changes were considered. The first one lasted until the saturation of the intracellular liquid phase, and the second one from the satur...

  2. High Rate of qacA- and qacB-Positive Methicillin-Resistant Staphylococcus aureus Isolates from Chlorhexidine-Impregnated Catheter-Related Bloodstream Infections

    OpenAIRE

    Ho, Cheng-Mao; Li, Chi-Yuan; Ho, Mao-Wang; Lin, Chien-Yu; Liu, Shu-Hui; Lu, Jang-Jih

    2012-01-01

    Chlorhexidine has been widely used for infection control. Although the use of chlorhexidine-impregnated catheters has reduced catheter-related infections, chlorhexidine-resistant Staphylococcus aureus has emerged. The correlation between the existence of the chlorhexidine-resistant genes qacA and qacB (qacA/B) in methicillin-resistant Staphylococcus aureus (MRSA) isolates and the effectiveness of chlorhexidine-impregnated catheters in the prevention of MRSA infections is unknown. Sixty methic...

  3. Evaluation of the plaque removal efficacy of xylitol-impregnated single-use toothbrush in vivo in 10-11-year-old children

    Directory of Open Access Journals (Sweden)

    Tezer Ulusu

    2017-01-01

    Full Text Available Objective: Xylitol is non-fermentable by oral bacteria and it inhibits the growth, metabolism and polysaccharide production of mutans streptococci, resulting in less bacterial plaque accumulation on teeth. This study aimed to compare the plaque removal efficacy on the teeth of children of xylitol-impregnated or non-impregnated single-use toothbrushes identical in shape and manufactured by the same company. Materials and Method: Thirty children aged 10-11 years were randomly separated into two groups of 15 children each. First group used a xylitol-impregnated toothbrush and the second group used a non-impregnated toothbrush for brushing. Dental plaque on upper central incisors was photographed intra-orally before and after brushing under standardized conditions. These photographs were stored in a computer and the amount of dental plaque was scored by using Turensky Modified Quinley Hein Plaque Index by a researcher blinded to the groups. Results: While both xylitol-impregnated and non-impregnated groups had significantly higher plaque index in before-brushing photographs than after-brushing photographs (p0.05. Conclusion: The results of the study emphasized that toothbrushing itself, regardless of xylitol content within the toothbrush, is essential for removing the dental plaque.

  4. High temperature in-situ synchrotron-based XRD study on the crystal structure evolution of C/C composite impregnated by FLiNaK molten salt.

    Science.gov (United States)

    Feng, Shanglei; Yang, Yingguo; Li, Li; Zhang, Dongsheng; Yang, Xinmei; Xia, Huihao; Yan, Long; Tsang, Derek K L; Huai, Ping; Zhou, Xingtai

    2017-09-06

    An in-situ real-time synchrotron-based grazing incidence X-ray diffraction was systematically used to investigate the crystal structural evolution of carbon fiber reinforced carbon matrix (C/C) composite impregnated with FLiNaK molten salt during the heat-treatment process. It was found that the crystallographic thermal expansion and contraction rate of interlayer spacing d 002 in C/C composite with FLiNaK salt impregnation is smaller than that in the virgin sample, indicating the suppression on interlayer spacing from FLiNaK salt impregnated. Meanwhile the crystallite size L C002 of C/C composite with FLiNaK salt impregnation is larger than the virgin one after whole heat treatment process, indicating that FLiNaK salt impregnation could facilitate the crystallization of C/C composite after heat treatment process. This improved crystallization in C/C composite with FLiNaK salt impregnation suggests the synthetic action of the salt squeeze effect on crooked carbon layer and the release of internal residual stress after heating-cooling process. Thus, the present study not only contribute to reveal the interaction mechanism between C/C composite and FLiNaK salt in high temperature environment, but also promote the design of safer and more reliable C/C composite materials for the next generation molten salt reactor.

  5. Mitigating Diseases Transmitted by Aedes Mosquitoes: A Cluster-Randomised Trial of Permethrin-Impregnated School Uniforms.

    Science.gov (United States)

    Kittayapong, Pattamaporn; Olanratmanee, Phanthip; Maskhao, Pongsri; Byass, Peter; Logan, James; Tozan, Yesim; Louis, Valérie; Gubler, Duane J; Wilder-Smith, Annelies

    2017-01-01

    Viral diseases transmitted via Aedes mosquitoes are on the rise, such as Zika, dengue, and chikungunya. Novel tools to mitigate Aedes mosquitoes-transmitted diseases are urgently needed. We tested whether commercially insecticide-impregnated school uniforms can reduce dengue incidence in school children. We designed a cluster-randomised controlled trial in Thailand. The primary endpoint was laboratory-confirmed dengue infections. Secondary endpoints were school absenteeism; and impregnated uniforms' 1-hour knock-down and 24 hour mosquito mortality as measured by standardised WHOPES bioassay cone tests at baseline and after repeated washing. Furthermore, entomological assessments inside classrooms and in outside areas of schools were conducted. We enrolled 1,811 pupils aged 6-17 from 5 intervention and 5 control schools. Paired serum samples were obtained from 1,655 pupils. In the control schools, 24/641 (3.7%) and in the intervention schools 33/1,014 (3.3%) students had evidence of new dengue infections during one school term (5 months). There was no significant difference in proportions of students having incident dengue infections between the intervention and control schools, with adjustment for clustering by school. WHOPES cone tests showed a 100% knock down and mortality of Aedes aegypti mosquitoes exposed to impregnated clothing at baseline and up to 4 washes, but this efficacy rapidly declined to below 20% after 20 washes, corresponding to a weekly reduction in knock-down and mosquito mortality by 4.7% and 4.4% respectively. Results of the entomological assessments showed that the mean number of Aedes aegypti mosquitoes caught inside the classrooms of the intervention schools was significantly reduced in the month following the introduction of the impregnated uniforms, compared to those collected in classrooms of the control schools (p = 0.04). Entomological assessments showed that the intervention had some impact on the number of Aedes mosquitoes inside

  6. Mitigating Diseases Transmitted by Aedes Mosquitoes: A Cluster-Randomised Trial of Permethrin-Impregnated School Uniforms.

    Directory of Open Access Journals (Sweden)

    Pattamaporn Kittayapong

    2017-01-01

    Full Text Available Viral diseases transmitted via Aedes mosquitoes are on the rise, such as Zika, dengue, and chikungunya. Novel tools to mitigate Aedes mosquitoes-transmitted diseases are urgently needed. We tested whether commercially insecticide-impregnated school uniforms can reduce dengue incidence in school children.We designed a cluster-randomised controlled trial in Thailand. The primary endpoint was laboratory-confirmed dengue infections. Secondary endpoints were school absenteeism; and impregnated uniforms' 1-hour knock-down and 24 hour mosquito mortality as measured by standardised WHOPES bioassay cone tests at baseline and after repeated washing. Furthermore, entomological assessments inside classrooms and in outside areas of schools were conducted.We enrolled 1,811 pupils aged 6-17 from 5 intervention and 5 control schools. Paired serum samples were obtained from 1,655 pupils. In the control schools, 24/641 (3.7% and in the intervention schools 33/1,014 (3.3% students had evidence of new dengue infections during one school term (5 months. There was no significant difference in proportions of students having incident dengue infections between the intervention and control schools, with adjustment for clustering by school. WHOPES cone tests showed a 100% knock down and mortality of Aedes aegypti mosquitoes exposed to impregnated clothing at baseline and up to 4 washes, but this efficacy rapidly declined to below 20% after 20 washes, corresponding to a weekly reduction in knock-down and mosquito mortality by 4.7% and 4.4% respectively. Results of the entomological assessments showed that the mean number of Aedes aegypti mosquitoes caught inside the classrooms of the intervention schools was significantly reduced in the month following the introduction of the impregnated uniforms, compared to those collected in classrooms of the control schools (p = 0.04.Entomological assessments showed that the intervention had some impact on the number of Aedes

  7. Study of the variables which influence the impregnation of globules, compressed tablets and tablet triturates used in homeopathy

    Directory of Open Access Journals (Sweden)

    Fernanda Santos de Souza

    2012-09-01

    Full Text Available Globules, compressed tablets and tablet triturates are solid dosage forms used in homeopathy. Divergences can be noted between the preparation techniques described in official compendiums as well as those applied in homeopathic pharmacies. The difficulty associated with standardization of the impregnation of these dosage forms occurs due to the lack of detail provided for the techniques in the literature, leaving it up to each pharmacy to decide on the exact method of preparation. The objective was to optimize the impregnation technique, through investigating the variables that influence the impregnation of globules, compressed tablets and tablet triturates, applying the statistical tool of factorial design. The independent variables were the dosage form, percentage and type of impregnation and drying temperature, and the dependent variables were the mass gain, disintegration time, friability and hardness. For the globules, the greatest mass gain was for 10% impregnation and drying at 20 ºC. For the tablet triturates and compressed tablets the greatest mass gain was for 15% impregnation and there was no difference between the results obtained using simple and triple impregnation or different drying temperatures. The results can contribute to improving the final product quality, besides aiding in the establishment of standardized techniques for the official compendiums.Glóbulos, comprimidos e tabletes são formas farmacêuticas sólidas utilizadas em homeopatia. Constatam-se divergências entre técnicas de preparação descritas nos compêndios oficiais, bem como em farmácias homeopáticas. A dificuldade de padronização na impregnação destas formas farmacêuticas também ocorre devido à falta de detalhamento das técnicas na literatura existente, deixando para cada farmácia a escolha de como executá-las. O objetivo foi otimizar a técnica de impregnação, através do estudo de variáveis que interferem na impregnação de gl

  8. Concept for Hydrogen-Impregnated Nanofiber/Photovoltaic Cargo Stowage System

    Science.gov (United States)

    Kennedy, Kriss J.; Toups, Larry David; Howard, Robert L.; Poffenberger, Jaso Eric

    2012-01-01

    A stowage system was conceived that consists of collapsible, reconfigurable stowage bags, rigid polyethylene or metal inserts, stainless-steel hooks, flexible photovoltaic materials, and webbing curtains that provide power generation, thermal stabilization, impact resistance, work/sleeping surfaces, and radiation protection to spaceflight hardware and crew members. Providing materials to the Lunar surface is costly from both a mass and a volume standpoint. Most of the materials that will be transferred to other planets or celestial bodies will not be returned to the Earth. In developing a plan to reconfigure pressurized logistics modules, it was determined that there was a requirement to be able to utilize the interior volume of these modules and transform them from Logistics Modules to Storage/Living Quarters. Logistics-to-living must re-utilize stowage bags and the structures that support them to construct living spaces, partitions, furniture, protective shelters from solar particle events, galactic cosmic radiation, and workspaces. In addition to reusing these logistics items for development of the interior living spaces, these items could also be reused outside the habitable volumes to build berms that protect assets from secondary blast ejecta, to define pathways, to stabilize high traffic areas, to protect against dust contamination, to secure assets to mobility elements, to provide thermal protection, and to create other types of protective shelters for surface experiments. Unique features of this innovation include hydrogen-impregnated nano fibers encapsulated in a polyethelyne coating that act as radiation shielding, flexible solar collection cells that can be connected together with cells from other bags via the webbing walls to create a solar array, and the ability to reconfigure each bag to satisfy multiple needs.

  9. Removal of As(V) using iron oxide impregnated carbon prepared from Tamarind hull.

    Science.gov (United States)

    Maiti, Abhijit; Agarwal, Vaibhav; De, Sirshendu; Basu, Jayanta K

    2010-08-01

    Iron oxide impregnated tamarind hull carbon (IOITHC) was developed for use as an adsorbent for the removal of As(V) from water. Tamarind hull was used as the source of carbonaceous material, which was first treated with ferric chloride and ammonium hydroxide solutions with successive calcination at 873-974 K in a muffle furnace for 1 h to prepare an arsenic adsorbent. The B.E.T surface area of IOITHC was found to be 304.6 m(2) g(-1) and the average iron content in the adsorbent was found to be 7 wt%. The point of zero charge (pH(zpc)) of IOITHC was found to be 6.9. As(V) and arsenic (as total) adsorption on IOITHC were investigated in batch mode using As(V) spiked distilled water and real contaminated groundwater (CGW). The effects of speed of agitation, adsorbent particle size, temperature, pH of the solution, and concentration of the adsorbate on the adsorption process were investigated. The maximum adsorption capacity of about 1.2 mg g(-1) As(V) was achieved. The removal of As(V) on IOITHC was compared with the untreated tamarind hull carbon as well as with the activated commercial carbon and IOITHC was found to be better adsorbent. Arsenic adsorption from arsenic contaminated groundwater (CGW) on IOITHC in batch mode indicates that 98% removal was achieved for adsorbent loading of 3.0 g L(-1) with initial arsenic concentration of 264 microg L(-1). Desorption study of arsenic from As(V)-loaded IOITHC was performed using aqueous solution in the pH range of 3 to 12.

  10. An evaluation of MRI safety and compatibility of a silver-impregnated antimicrobial wound dressing.

    Science.gov (United States)

    Nyenhuis, John; Duan, Lian

    2009-07-01

    Wound infections can slow healing, increase pain, and have negative effects on a patient's quality of life. The recent emergence of antibiotic-resistant bacterial strains has led wound care specialists to revisit alternative topical agents such as silver to control wound bioburden. Aquacel Ag is an ionic silver-containing barrier dressing that is able to absorb large amounts of wound exudate. The aim of this study was to assess the magnetic resonance (MR) safety and compatibility of this dressing, according to the standard requirements of the American Society for Testing and Materials (ASTM). Radiofrequency-induced temperature changes associated with the test dressing were assessed using an ASTM phantom at 123 and 64 MHz. Whether the dressing caused any image distortion or magnetic deflection or if the electric resistance of the hydrated dressing differed significantly from that of tissue was also investigated. Similar radiofrequency-induced temperature changes were observed during 123 MHz (nominal 3 T) MR imaging of the phantom material alone (1.3 degrees C) and when the dressing was added (1.8 degrees C-2.0 degrees C). Similar increases in temperature were also observed at 64 MHz (1.5 T) in the phantom material alone (1.4 degrees C-1.9 degrees C) and with the dressing (1.6 degrees C-1.7 degrees C). The test dressing did not cause any discernible image distortion or magnetic deflection and had similar electric resistance to human body tissues. The wound dressing impregnated with ionic silver evaluated in this study has similar magnetic and electric characteristics to human tissues and is MR safe as defined in ASTM standard F2503-05. Therefore, the dressings can be left in place when a patient is undergoing MR imaging.

  11. Magnesium oxide-impregnated tuff soil-derived ceramic: a novel cadmium(II) adsorbing media

    Science.gov (United States)

    Salim, Md; Bhakta, Jatindra N.; Maneesh, Namburath; Munekage, Yukihiro; Motomura, Kevin

    2017-07-01

    The contamination of cadmium (Cd) in the aquatic environment is one of the serious environmental and human health's risks. The present study attempted to develop the potential magnesium oxide (MgO)-impregnated tuff soil-derived ceramic (MITDC)-based novel adsorbent media for adsorbing higher rate of cadmium [Cd(II)] from water phase. A potential MITDC adsorbent media was developed using volcanic raw tuff soil and its Cd(II) adsorption capacity from water phase was evaluated comparing with the raw tuff soil. A series of studies were carried out in an agitated batch method at 20 ± 2 °C to characterize the adsorption capacity of MITDC under different conditions of factors, such as contact time (0-360 min), initial pH (3-11) of solution, dose of MITDC (2, 5, 7.5 and 10 g/L), and initial concentration of Cd(II) (5, 10, 20, 30, and 40 mg/L), influencing the adsorption mechanism. MITDC exhibited the equilibrium state of maximum Cd(II) adsorption at the contact time 120 min and pH 4.7 (removed 98.2 % Cd) when initial Cd(II) concentration was 10 mg/L in the present study. The dose of 7.5 g MITDC/L showed maximum removal of Cd(II) from water. Experimental data were described by the Freundlich and the Langmuir isotherms and equilibrium data fitted well with the Langmuir model ( R 2 = 0.996). The Cd(II) adsorption capacity of MITDC was 31.25 mg/g. The high Cd(II) adsorption capacity indicated that novel MITDC could be used as a potential ceramic adsorbent media to remove high rate of Cd(II) from aqueous phase.

  12. Procedures for declaring pest free status

    International Nuclear Information System (INIS)

    Barclay, H.J.; Hargrove, J.W.; Clift, A.; Meats, A.

    2005-01-01

    Procedures are presented for declaring an area to be 'pest free' following an area-wide eradication programme against a population of an insect pest. These involve two probability models to deal with null trapping results, and a growth model to help verify that pests were no longer present when control actions were stopped. The two probability models are presented for a situation in which trapping for an insect pest is ongoing, and for which the trapping results are all negative. The models calculate the probability of such negative results if in fact insects were present. If this probability is sufficiently low, then the hypothesis that insects are present is rejected. The models depend on knowledge of the efficiency of the traps, and also the area of attractiveness of the traps. The possibility of a rebound of an incipient but non-detectable population, that remains after control measures are discontinued, is considered. Using a growth model, the rate of increase, of an insect population that starts from one or two insects, is examined. An example is given for tsetse flies - both means and confidence limits are calculated for a period of 24 reproductive periods after control has been terminated. If insects are disease vectors, it is also suggested that the progress of the disease be monitored to detect continuing transmission. This should be done in conjunction with a disease transmission model. (author)

  13. A 33,000-year-old incipient dog from the Altai Mountains of Siberia: evidence of the earliest domestication disrupted by the Last Glacial Maximum.

    Directory of Open Access Journals (Sweden)

    Nikolai D Ovodov

    Full Text Available BACKGROUND: Virtually all well-documented remains of early domestic dog (Canis familiaris come from the late Glacial and early Holocene periods (ca. 14,000-9000 calendar years ago, cal BP, with few putative dogs found prior to the Last Glacial Maximum (LGM, ca. 26,500-19,000 cal BP. The dearth of pre-LGM dog-like canids and incomplete state of their preservation has until now prevented an understanding of the morphological features of transitional forms between wild wolves and domesticated dogs in temporal perspective. METHODOLOGY/PRINCIPAL FINDING: We describe the well-preserved remains of a dog-like canid from the Razboinichya Cave (Altai Mountains of southern Siberia. Because of the extraordinary preservation of the material, including skull, mandibles (both sides and teeth, it was possible to conduct a complete morphological description and comparison with representative examples of pre-LGM wild wolves, modern wolves, prehistoric domesticated dogs, and early dog-like canids, using morphological criteria to distinguish between wolves and dogs. It was found that the Razboinichya Cave individual is most similar to fully domesticated dogs from Greenland (about 1000 years old, and unlike ancient and modern wolves, and putative dogs from Eliseevichi I site in central Russia. Direct AMS radiocarbon dating of the skull and mandible of the Razboinichya canid conducted in three independent laboratories resulted in highly compatible ages, with average value of ca. 33,000 cal BP. CONCLUSIONS/SIGNIFICANCE: The Razboinichya Cave specimen appears to be an incipient dog that did not give rise to late Glacial-early Holocene lineages and probably represents wolf domestication disrupted by the climatic and cultural changes associated with the LGM. The two earliest incipient dogs from Western Europe (Goyet, Belguim and Siberia (Razboinichya, separated by thousands of kilometers, show that dog domestication was multiregional, and thus had no single place of

  14. High- and low-Cr chromitite and dunite in a Tibetan ophiolite: evolution from mature subduction system to incipient forearc in the Neo-Tethyan Ocean

    Science.gov (United States)

    Xiong, Qing; Henry, Hadrien; Griffin, William L.; Zheng, Jian-Ping; Satsukawa, Takako; Pearson, Norman J.; O'Reilly, Suzanne Y.

    2017-06-01

    The microstructures, major- and trace-element compositions of minerals and electron backscattered diffraction (EBSD) maps of high- and low-Cr# [spinel Cr# = Cr3+/(Cr3+ + Al3+)] chromitites and dunites from the Zedang ophiolite in the Yarlung Zangbo Suture (South Tibet) have been used to reveal their genesis and the related geodynamic processes in the Neo-Tethyan Ocean. The high-Cr# (0.77-0.80) chromitites (with or without diopside exsolution) have chromite compositions consistent with initial crystallization by interaction between boninitic magmas, harzburgite and reaction-produced magmas in a shallow, mature mantle wedge. Some high-Cr# chromitites show crystal-plastic deformation and grain growth on previous chromite relics that have exsolved needles of diopside. These features are similar to those of the Luobusa high-Cr# chromitites, possibly recycled from the deep upper mantle in a mature subduction system. In contrast, mineralogical, chemical and EBSD features of the Zedang low-Cr# (0.49-0.67) chromitites and dunites and the silicate inclusions in chromite indicate that they formed by rapid interaction between forearc basaltic magmas (MORB-like but with rare subduction input) and the Zedang harzburgites in a dynamically extended, incipient forearc lithosphere. The evidence implies that the high-Cr# chromitites were produced or emplaced in an earlier mature arc (possibly Jurassic), while the low-Cr# associations formed in an incipient forearc during the initiation of a new episode of Neo-Tethyan subduction at 130-120 Ma. This two-episode subduction model can provide a new explanation for the coexistence of high- and low-Cr# chromitites in the same volume of ophiolitic mantle.

  15. Soft-mode behavior and incipient ferroelectricity in Na.sub.1/2./sub.Bi.sub.1/2./sub.Cu.sub.3./sub.Ti.sub.4./sub.O.sub.12./sub..

    Czech Academy of Sciences Publication Activity Database

    Ferrarelli, M.C.; Nuzhnyy, Dmitry; Sinclair, D.C.; Kamba, Stanislav

    2010-01-01

    Roč. 81, č. 22 (2010), 224112/1-224112/7 ISSN 1098-0121 R&D Projects: GA ČR(CZ) GA202/09/0682 Institutional research plan: CEZ:AV0Z10100520 Keywords : infrared and terahertz spectroscopy * soft mode * incipient ferroelectrics Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.772, year: 2010

  16. Impregnation of 12-tungstophosphoric acid on silica - part I: determination of impregnation parameters, characterization and evaluation of catalytic activity; Impregnacao do acido 12-fosfotungstico em silica - parte I: determinacao de parametros de impregnacao, caracterizacao e avaliacao da atividade catalitica

    Energy Technology Data Exchange (ETDEWEB)

    Scroccaro, Karine Isabel; Tanobe, Valcineide Oliveira de Andrade; Cocco, Lilian Cristina; Yamamoto, Carlos Itsuo, E-mail: karineisabel@yahoo.com.br [Universidade Federal do Parana, Curitiba, PR (Brazil). Centro Politecnico. Dept. de Engenharia Quimica; Wypych, Fernando [Universidade Federal do Parana, Curitiba, PR (Brazil). Centro Politecnico. Dept. de Quimica

    2012-07-01

    Catalyst based on Kegging-type heteropolyacids (H{sub 3}PW{sub 12}O{sub 40} - HPA), supported on SiO{sub 2} (H{sub 3}PW), were prepared by the impregnation method under different thermal treatment conditions. The materials were characterized by different instrumental techniques and used as catalysts in the methyl esterification reactions of stearic acid. Using the catalyst with 15% of HPA, conversions higher than 60% were obtained after 2 h of reaction at 65 deg C. Recovery studies using hot-filtration with ethanol at 75 deg C showed satisfactory activity for two additional reaction cycles. (author)

  17. Use of insecticide-impregnated mosquito nets and other impregnated materials for malaria control in the Americas Uso de mosquiteros y otros materiales impregnados para el control de la malaria en las Américas

    Directory of Open Access Journals (Sweden)

    R. H. Zimmerman

    1997-07-01

    Full Text Available This article reviews the current status of the use of insecticide-impregnated mosquito nets and other impregnated materials in the Americas. Studies from Brazil, Colombia, Ecuador, Guatemala, Peru, Suriname, and Venezuela are examined. It is concluded that most studies have suffered from experimental design errors, short duration problems, and/or inadequate measurement of health indicators. The review brings out the great difficulty of conducting scientific studies that attempt to measure the impact of insecticide-treated materials on malaria incidence. In particular, the low incidence of malaria in the Americas, the high prevalences of P. vivax and relapsing cases, and the relationship between human activity patterns and the crepuscular biting patterns of certain malaria vectors stand in the way of easy experimental design and execution. The utilization of impregnated mosquito nets or other impregnated materials as a major component of an integrated malaria control program would be premature at this time. However, it is recommended that well-conceived large-scale trials and interventions be considered when they are based on a thorough understanding of the dynamics of malaria transmission in the area of study.En este artículo se revisa el uso actual en las Américas de mosquiteros y otros materiales impregnados con insecticida. Se examinan diversos estudios efectuados en el Brasil, Colombia, Ecuador, Guatemala, Perú, Suriname y Venezuela y se llega a la conclusión de que en su mayor parte estos estudios adolecen de graves deficiencias de diseño, problemas de excesiva brevedad, o de una medición inadecuada de los indicadores de salud. La revisión resalta la gran dificultad de llevar a cabo estudios que buscan medir el impacto de los materiales tratados con insecticidas sobre la incidencia de malaria. En particular, la baja incidencia de malaria en las Américas, las altas prevalencias de Plasmodium vivax y de casos recurrentes y la relaci

  18. Poor Outcomes of Irrigation and Debridement in Acute Periprosthetic Joint Infection With Antibiotic-Impregnated Calcium Sulfate Beads.

    Science.gov (United States)

    Flierl, Michael A; Culp, Brian M; Okroj, Kamil T; Springer, Bryan D; Levine, Brett R; Della Valle, Craig J

    2017-08-01

    One proposed strategy to increase the success of irrigation and debridement with implant retention for the treatment of acute periprosthetic joint infection (PJI) is the use of dissolvable antibiotic-impregnated calcium sulfate beads to provide a local depot of antibiotics. The purpose of this study was to evaluate the outcome of such an approach. Thirty-two patients with acute hematogenous (18 patients; 1 bilateral) or acute postoperative (14 patients) PJIs who underwent irrigation and debridement with implant retention and addition of antibiotic-impregnated calcium sulfate beads were retrospectively reviewed. PJI followed 27 total knee arthroplasties and 6 total hip arthroplasties. The most common infecting organisms were methicillin-sensitive Staphylococcus aureus (13 of 33) and Streptococcus (9 of 33). The primary outcome parameter was recurrence of infection according to the Musculoskeletal Infection Society criteria. Patients were followed up for a minimum of 3 months or until failure. At a mean of 12.7 months (range, 3-30 months), 16 of the 33 patients failed (48%). Acute hematogenous and acute postoperative PJI had similar failure rates at 47% and 50%, respectively (P = .88). Seven failures required a 2-stage exchange, while 8 patients were treated with chronic antibiotic suppression, being unwilling or unable to undergo further surgical intervention. The addition of antibiotic-impregnated calcium sulfate beads does not appear to improve outcomes of irrigation and debridement with implant retention in the setting of acute hematogenous or acute postoperative PJI. Given the short follow-up in this report, this represents a best-case scenario and the overall failure rate may be higher with further follow-up. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Silver-impregnated hydrofiber dressing followed by delayed surgical closure for management of infants born with giant omphaloceles.

    Science.gov (United States)

    Oquendo, Marcial; Agrawal, Vaidehi; Reyna, Roxana; Patel, Haroon I; Emran, Mohammad A; Almond, P Stephen

    2015-10-01

    We successfully employed silver-impregnated hydrofiber dressing for management of giant omphaloceles (GO) followed by delayed surgical closure. Between 2005 and 2008, eight consecutive GO infants were cared for at Driscoll Children's Hospital. Four patients had additional congenital anomalies including Beckwith-Wiedemann (n = 1), tetralogy of Fallot (n = 1), pulmonary hypoplasia (n = 1), and ruptured omphalocele (n=1). Infants underwent amnion epithelization using a silver-impregnated hydrofiber dressing over the course of several months followed by delayed surgical closure. Mean ± SD of parameters including maternal age, gestational age, infant weight, size of GO, preoperative intubation, preoperative hospitalization, time to epithelization, days to surgical closure, postoperative hospitalization, postoperative intubation and months of follow-up were studied. Five patients underwent successful closure, 2 were lost to follow-up and 1 was lost because of withdrawal of support. The maternal age, gestation age and weight of infant were 28 ± 5.3 years, 34 ± 4 weeks and 2.5 ± 0.62 kg, respectively. The GO size was 11 cm in length and 11 cm in width, respectively. Preoperative hospitalization days were 78 ± 74 days. Preoperative intubation was 3.5 ± 3.1 days with 2 neonates requiring tracheostomy and home ventilation owing to additional congenital abnormalities. Time to epithelization was 2.9 ± 0.9 months. Days to surgical closure and postoperative hospitalization were 331 ± 119 days and 5 ± 3.4 days, respectively. Average follow-up was 37 ± 27 months. No treatment associated morbidities are noted. Silver-impregnated hydrofiber mediated epithelization of GO followed by delayed surgical closure is safe for management of infants. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Antibacterial Efficacy of Silver-Impregnated Polyelectrolyte Multilayers Immobilized on a Biological Dressing in a Murine Wound Infection Model

    Science.gov (United States)

    Guthrie, Kathleen M.; Agarwal, Ankit; Tackes, Dana S.; Johnson, Kevin W.; Abbott, Nicholas L.; Murphy, Christopher J.; Czuprynski, Charles J.; Kierski, Patricia R.; Schurr, Michael J.; McAnulty, Jonathan F.

    2012-01-01

    Objective To investigate the antibacterial effect of augmenting a biological dressing with polymer films containing silver nanoparticles. Background Biological dressings, such as Biobrane, are commonly used for treating partial-thickness wounds and burn injuries. Biological dressings have several advantages over traditional wound dressings. However, as many as 19% of wounds treated with Biobrane become infected, and, once infected, the Biobrane must be removed and a traditional dressing approach should be employed. Silver is a commonly used antimicrobial in wound care products, but current technology uses cytotoxic concentrations of silver in these dressings. We have developed a novel and facile technology that allows immobilization of bioactive molecules on the surfaces of soft materials, demonstrated here by augmentation of Biobrane with nanoparticulate silver. Surfaces modified with nanometer-thick polyelectrolyte multilayers (PEMs) impregnated with silver nanoparticles have been shown previously to result in in vitro antibacterial activity against Staphylococcus epidermidis at loadings of silver that are noncytotoxic. Methods We demonstrated that silver-impregnated PEMs can be nondestructively immobilized onto the surface of Biobrane (Biobrane-Ag) and determined the in vitro antibacterial activity of Biobrane-Ag with Staphylococcus aureus. In this study, we used an in vivo wound infection model in mice induced by topical inoculation of S aureus onto full-thickness 6-mm diameter wounds. After 72 hours, bacterial quantification was performed. Results Wounds treated with Biobrane-Ag had significantly (P silver-impregnated PEMs on the wound-contact surface of Biobrane significantly reduces bacterial bioburden in full-thickness murine skin wounds. Further research will investigate whether this construct can be considered for human use. PMID:22609841