Criticality incident detection assessment methodology

International Nuclear Information System (INIS)

Haley, Richard M.; Warburton, Simon J.; Bowden, Russell L.

2003-01-01

In the United Kingdom, all nuclear facilities that handle, treat or store fissile material require a Criticality Incident Detection and Alarm System (CIDAS) to be installed, unless a case is made for the omission of such a system. Where it is concluded that a CIDAS is required, the primary objective is the reliable detection of criticality and the initiation of prompt evacuation of plant workers from the vicinity of the incident. This paper will examine and compare various methods that can be used to demonstrate that a CIDAS will satisfy the detection criterion. The paper will focus on fit-for-purpose and cost-effective methods for the assessment of gamma-based systems. In the experience of the authors this is particularly useful in demonstrating the efficacy of existing systems in operational plant. (author)

Information System Design Methodology Based on PERT/CPM Networking and Optimization Techniques.

Science.gov (United States)

Bose, Anindya

The dissertation attempts to demonstrate that the program evaluation and review technique (PERT)/Critical Path Method (CPM) or some modified version thereof can be developed into an information system design methodology. The methodology utilizes PERT/CPM which isolates the basic functional units of a system and sets them in a dynamic time/cost…

Development and testing of incident detection algorithms. Vol. 2, research methodology and detailed results.

Science.gov (United States)

1976-04-01

The development and testing of incident detection algorithms was based on Los Angeles and Minneapolis freeway surveillance data. Algorithms considered were based on times series and pattern recognition techniques. Attention was given to the effects o...

Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio-Inspired Optimization Techniques

Science.gov (United States)

2017-11-01

on Bio -Inspired Optimization Techniques by Canh Ly, Nghia Tran, and Ozlem Kilic Approved for public release; distribution is...Research Laboratory Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio -Inspired Optimization Techniques by...SUBTITLE Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio -Inspired Optimization Techniques 5a. CONTRACT NUMBER

Sandia software guidelines: Volume 5, Tools, techniques, and methodologies

Energy Technology Data Exchange (ETDEWEB)

1989-07-01

This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. This volume describes software tools and methodologies available to Sandia personnel for the development of software, and outlines techniques that have proven useful within the Laboratories and elsewhere. References and evaluations by Sandia personnel are included. 6 figs.

METHODOLOGY OF TECHNIQUE PREPARATION FOR LOW VISION JAVELIN THROWERS

Directory of Open Access Journals (Sweden)

Milan Matić

2013-07-01

Full Text Available Javelin throwing discipline for disabled people has been expanding couple of years back. In addition, world’s records have been improving year after year. The esential part in preparation of low vision javelin throwers is mastering the technique elements, crucial for acquiring better results. Method of theoretical analysis, decriptive and comparative methods of survey were applied. Relevant knowledge in the area of low vision javelin throwers was analyzed and systematized, and then interpretated theoretically and applied on the top javelin thrower, which served as a base for the inovative apporoach in methodology and praxis with disabled people. Due to visual impairment, the coordination and balance are challenged. This limitation practically makes the difference in methodology, explained in this article. Apart from the goals focused on improving the condition and results on competitions, more specialized goals should be considered, e.g. improving of orientation, balance and socialization process for the people who have low vision. Special approach used in the technique preparation brought the significant improvement in techique of our famous Paralympian Grlica Miloš. In addition to the technique improvement he acquired better results on the big competitions and a few worldwide valuable prizes were won. The area of ’sport for disabled people’ is not enough present in the praxis of sport’s workers. More articles and scientific surveys on this topic are needed for further work and results improvement with these kind of sportsmen.

Methodology to evaluate the impact of the erosion in cultivated floors applying the technique of the 137CS

International Nuclear Information System (INIS)

Gil Castillo, R.; Peralta Vital, J.L.; Carrazana, J.; Riverol, M.; Penn, F.; Cabrera, E.

2004-01-01

The present paper shows the results obtained in the framework of 2 Nuclear Projects, in the topic of application of nuclear techniques to evaluate the erosion rates in cultivated soils. Taking into account the investigations with the 137 CS technique, carried out in the Province of Pinar del Rio, was obtained and validated (first time) a methodology to evaluate the erosion impact in a cropland. The obtained methodology includes all relevant stages for the adequate application of the 137 CS technique, from the initial step of area selection, the soil sampling process, selection of the models and finally, the results evaluation step. During the methodology validation process in soils of the Municipality of San Juan y Martinez, the erosion rates estimated by the methodology and the obtained values by watershed segment measures (traditional technique) were compared in a successful manner. The methodology is a technical guide, for the adequate application of the 137 CS technique to estimate the soil redistribution rates in cultivated soils

A dynamic systems engineering methodology research study. Phase 2: Evaluating methodologies, tools, and techniques for applicability to NASA's systems projects

Science.gov (United States)

Paul, Arthur S.; Gill, Tepper L.; Maclin, Arlene P.

1989-01-01

A study of NASA's Systems Management Policy (SMP) concluded that the primary methodology being used by the Mission Operations and Data Systems Directorate and its subordinate, the Networks Division, is very effective. Still some unmet needs were identified. This study involved evaluating methodologies, tools, and techniques with the potential for resolving the previously identified deficiencies. Six preselected methodologies being used by other organizations with similar development problems were studied. The study revealed a wide range of significant differences in structure. Each system had some strengths but none will satisfy all of the needs of the Networks Division. Areas for improvement of the methodology being used by the Networks Division are listed with recommendations for specific action.

The Development of a Differential Deposition Technique for Figure Correction in Grazing Incidence Optics

Data.gov (United States)

National Aeronautics and Space Administration — We propose the development of a physical-vapor-deposition coating technique to correct residual figure errors in grazing-incidence optics. The process involves...

Methodology for attainment of density and effective atomic number through dual energy technique using microtomographic images

International Nuclear Information System (INIS)

Alves, H.; Lima, I.; Lopes, R.T.

2014-01-01

Dual energy technique for computerized microtomography shows itself as a promising method for identification of mineralogy on geological samples of heterogeneous composition. It can also assist with differentiating very similar objects regarding the attenuation coefficient, which are usually not separable during image processing and analysis of microtomographic data. Therefore, the development of a feasible and applicable methodology of dual energy in the analysis of microtomographic images was sought. - Highlights: • Dual energy technique is promising for identification of distribution of minerals. • A feasible methodology of dual energy in analysis of tomographic images was sought. • The dual energy technique is efficient for density and atomic number identification. • Simulation showed that the proposed methodology agrees with theoretical data. • Nondestructive characterization of distribution of density and chemical composition

The critical incident technique in dental research: A review

Directory of Open Access Journals (Sweden)

Binu Santha

2016-01-01

Full Text Available Research is a scientific quest to find answers to certain questions. It makes us think with curiosity and wonderment about how to make something better. Research contributes in a major way to the development and maintenance of health and health care systems. Qualitative research is concerned with qualitative phenomena and includes subjective assessment of attitudes, opinions, and behavior. It is especially important in the behavioral sciences where the aim is to discover the underlying motives of human behavior. The critical incident technique (CIT is a well-established qualitative research tool used in many areas of health sciences including nursing, medicine, dentistry, and their respective education systems. This technique is described as consisting of “a set of procedures for collecting direct observations of human behavior in such a way as to facilitate their potential usefulness in solving practical problems.” This review gives a gist of CIT and its application in different aspects of dental research.

Conditional predictive inference for online surveillance of spatial disease incidence

Science.gov (United States)

Corberán-Vallet, Ana; Lawson, Andrew B.

2012-01-01

This paper deals with the development of statistical methodology for timely detection of incident disease clusters in space and time. The increasing availability of data on both the time and the location of events enables the construction of multivariate surveillance techniques, which may enhance the ability to detect localized clusters of disease relative to the surveillance of the overall count of disease cases across the entire study region. We introduce the surveillance conditional predictive ordinate as a general Bayesian model-based surveillance technique that allows us to detect small areas of increased disease incidence when spatial data are available. To address the problem of multiple comparisons, we incorporate a common probability that each small area signals an alarm when no change in the risk pattern of disease takes place into the analysis. We investigate the performance of the proposed surveillance technique within the framework of Bayesian hierarchical Poisson models using a simulation study. Finally, we present a case study of salmonellosis in South Carolina. PMID:21898522

Gadamerian philosophical hermeneutics as a useful methodological framework for the Delphi technique

Directory of Open Access Journals (Sweden)

Diana Guzys

2015-05-01

Full Text Available In this article we aim to demonstrate how Gadamerian philosophical hermeneutics may provide a sound methodological framework for researchers using the Delphi Technique (Delphi in studies exploring health and well-being. Reporting of the use of Delphi in health and well-being research is increasing, but less attention has been given to covering its methodological underpinnings. In Delphi, a structured anonymous conversation between participants is facilitated, via an iterative survey process. Participants are specifically selected for their knowledge and experience with the topic of interest. The purpose of structuring conversation in this manner is to cultivate collective opinion and highlight areas of disagreement, using a process that minimizes the influence of group dynamics. The underlying premise is that the opinion of a collective is more useful than that of an individual. In designing our study into health literacy, Delphi aligned well with our research focus and would enable us to capture collective views. However, we were interested in the methodology that would inform our study. As researchers, we believe that methodology provides the framework and principles for a study and is integral to research integrity. In assessing the suitability of Delphi for our research purpose, we found little information about underpinning methodology. The absence of a universally recognized or consistent methodology associated with Delphi was highlighted through a scoping review we undertook to assist us in our methodological thinking. This led us to consider alternative methodologies, which might be congruent with the key principles of Delphi. We identified Gadamerian philosophical hermeneutics as a methodology that could provide a supportive framework and principles. We suggest that this methodology may be useful in health and well-being studies utilizing the Delphi method.

Gadamerian philosophical hermeneutics as a useful methodological framework for the Delphi technique.

Science.gov (United States)

Guzys, Diana; Dickson-Swift, Virginia; Kenny, Amanda; Threlkeld, Guinever

2015-01-01

In this article we aim to demonstrate how Gadamerian philosophical hermeneutics may provide a sound methodological framework for researchers using the Delphi Technique (Delphi) in studies exploring health and well-being. Reporting of the use of Delphi in health and well-being research is increasing, but less attention has been given to covering its methodological underpinnings. In Delphi, a structured anonymous conversation between participants is facilitated, via an iterative survey process. Participants are specifically selected for their knowledge and experience with the topic of interest. The purpose of structuring conversation in this manner is to cultivate collective opinion and highlight areas of disagreement, using a process that minimizes the influence of group dynamics. The underlying premise is that the opinion of a collective is more useful than that of an individual. In designing our study into health literacy, Delphi aligned well with our research focus and would enable us to capture collective views. However, we were interested in the methodology that would inform our study. As researchers, we believe that methodology provides the framework and principles for a study and is integral to research integrity. In assessing the suitability of Delphi for our research purpose, we found little information about underpinning methodology. The absence of a universally recognized or consistent methodology associated with Delphi was highlighted through a scoping review we undertook to assist us in our methodological thinking. This led us to consider alternative methodologies, which might be congruent with the key principles of Delphi. We identified Gadamerian philosophical hermeneutics as a methodology that could provide a supportive framework and principles. We suggest that this methodology may be useful in health and well-being studies utilizing the Delphi method.

Keyboarding Instruction at NABTE Institutions: Are We Teaching Techniques to Reduce CTD Incidence?

Science.gov (United States)

Blaszczynski, Carol; Joyce, Marguerite Shane

1996-01-01

Responses from 157 of 193 business teachers who teach keyboarding indicated that 78.7% were aware of cumulative trauma disorder and 22% had experienced it. Only 13% of classrooms were equipped with wrist rests. About 53% teach techniques to reduce incidence, but 20% did not know whether they taught preventive measures. (SK)

Improvement in the incident reporting and investigation procedures using process excellence (DMAI2C) methodology

International Nuclear Information System (INIS)

Miles, Elizabeth N.

2006-01-01

In 1996, Health and Safety introduced an incident investigation process called Learning to Look ( C) to Johnson and Johnson. This process provides a systematic way of analyzing work-related injuries and illness, uncovers root cause that leads to system defects, and points to viable solutions. The process analyzed involves three steps: investigation and reporting of the incident, determination of root cause, and development and implementation of a corrective action plan. The process requires the investigators to provide an initial communication for work-related serious injuries and illness as well as lost workday cases to Corporate Headquarters within 72h of the incident with a full investigative report to follow within 10 days. A full investigation requires a written report, a cause-result logic diagram (CRLD), a corrective action plan (CAP) and a report of incident costs (SafeCost) all due to be filed electronically. It is incumbent on the principal investigator and his or her investigative teams to assemble the various parts of the investigation and to follow up with the relevant parties to ensure corrective actions are implemented, and a full report submitted to Corporate executives. Initial review of the system revealed that the process was not working as designed. A number of reports were late, not signed by the business leaders, and in some instances, all cause were not identified. Process excellence was the process used to study the issue. The team used six sigma DMAI 2 C methodologies to identify and implement system improvements. The project examined the breakdown of the critical aspects of the reporting and investigation process that lead to system errors. This report will discuss the study findings, recommended improvements, and methods used to monitor the new improved process

Dosimetric methodology for extremities of individuals occupationally exposed to beta radiation using the optically stimulated luminescence technique

International Nuclear Information System (INIS)

Pinto, Teresa Cristina Nathan Outeiro

2010-01-01

A dosimetric methodology was established for the determination of extremity doses of individuals occupationally exposed to beta radiation, using Al 2 O 3 :C detectors and the optically stimulated luminescence (OSL) reader system microStar, Landauer. The main parts of the work were: characterization of the dosimetric material Al 2 O 3 :C using the OSL technique; establishment of the dose evaluation methodology; dose rate determination of beta radiation sources; application of the established method in a practical test with individuals occupationally exposed to beta radiation during a calibration simulation of clinical applicators; validation of the methodology by the comparison between the dose results of the practical test using the OSL and the thermoluminescence (TL) techniques. The results show that both the OSL Al-2O 3 :C detectors and the technique may be utilized for individual monitoring of extremities and beta radiation. (author)

Global trends in the incidence and prevalence of type 2 diabetes in children and adolescents : a systematic review and evaluation of methodological approaches

NARCIS (Netherlands)

Fazeli Farsani, S; van der Aa, M P; van der Vorst, M M J; Knibbe, C A J; de Boer, A

AIMS/HYPOTHESIS: This study aimed to systematically review what has been reported on the incidence and prevalence of type 2 diabetes in children and adolescents, to scrutinise the methodological issues observed in the included studies and to prepare recommendations for future research and

Analysis of environmental contamination resulting from catastrophic incidents: part 2. Building laboratory capability by selecting and developing analytical methodologies.

Science.gov (United States)

Magnuson, Matthew; Campisano, Romy; Griggs, John; Fitz-James, Schatzi; Hall, Kathy; Mapp, Latisha; Mullins, Marissa; Nichols, Tonya; Shah, Sanjiv; Silvestri, Erin; Smith, Terry; Willison, Stuart; Ernst, Hiba

2014-11-01

. However, the same techniques discussed could also have application to catastrophes resulting from other incidents, such as natural disasters or industrial accidents. Further, the high sample throughput enabled by the techniques discussed could be employed for conventional environmental studies and compliance monitoring, potentially decreasing costs and/or increasing the quantity of data available to decision-makers. Published by Elsevier Ltd.

A methodology for automated CPA extraction using liver biopsy image analysis and machine learning techniques.

Science.gov (United States)

Tsipouras, Markos G; Giannakeas, Nikolaos; Tzallas, Alexandros T; Tsianou, Zoe E; Manousou, Pinelopi; Hall, Andrew; Tsoulos, Ioannis; Tsianos, Epameinondas

2017-03-01

Collagen proportional area (CPA) extraction in liver biopsy images provides the degree of fibrosis expansion in liver tissue, which is the most characteristic histological alteration in hepatitis C virus (HCV). Assessment of the fibrotic tissue is currently based on semiquantitative staging scores such as Ishak and Metavir. Since its introduction as a fibrotic tissue assessment technique, CPA calculation based on image analysis techniques has proven to be more accurate than semiquantitative scores. However, CPA has yet to reach everyday clinical practice, since the lack of standardized and robust methods for computerized image analysis for CPA assessment have proven to be a major limitation. The current work introduces a three-stage fully automated methodology for CPA extraction based on machine learning techniques. Specifically, clustering algorithms have been employed for background-tissue separation, as well as for fibrosis detection in liver tissue regions, in the first and the third stage of the methodology, respectively. Due to the existence of several types of tissue regions in the image (such as blood clots, muscle tissue, structural collagen, etc.), classification algorithms have been employed to identify liver tissue regions and exclude all other non-liver tissue regions from CPA computation. For the evaluation of the methodology, 79 liver biopsy images have been employed, obtaining 1.31% mean absolute CPA error, with 0.923 concordance correlation coefficient. The proposed methodology is designed to (i) avoid manual threshold-based and region selection processes, widely used in similar approaches presented in the literature, and (ii) minimize CPA calculation time. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Using the critical incident technique in community-based participatory research: a case study.

Science.gov (United States)

Belkora, Jeffrey; Stupar, Lauren; O'Donnell, Sara

2011-01-01

Successful community-based participatory research involves the community partner in every step of the research process. The primary study for this paper took place in rural, Northern California. Collaborative partners included an academic researcher and two community based resource centers that provide supportive services to people diagnosed with cancer. This paper describes our use of the Critical Incident Technique (CIT) to conduct Community-based Participatory Research. We ask: Did the CIT facilitate or impede the active engagement of the community in all steps of the study process? We identified factors about the Critical Incident Technique that were either barriers or facilitators to involving the community partner in every step of the research process. Facilitators included the CIT's ability to accommodate involvement from a large spectrum of the community, its flexible design, and its personal approach. Barriers to community engagement included training required to conduct interviews, depth of interview probes, and time required. Overall, our academic-community partners felt that our use of the CIT facilitated community involvement in our Community-Based Participatory Research Project, where we used it to formally document the forces promoting and inhibiting successful achievement of community aims.

A prospective study to select and evaluate anesthesiology residents: phase I, the critical incident technique.

Science.gov (United States)

Altmaier, E M; From, R P; Pearson, K S; Gorbatenko-Roth, K G; Ugolini, K A

1997-12-01

To develop categories of behavior that define an applicant's aptitude for anesthesia, and to attempt to determine the relative importance of these behaviors to successful residency performance. Prospective open study. Anesthesia residencies at three midwest university teaching hospitals. Using a structured interview format known as the critical incident technique, faculty anesthesiologists were asked to describe examples of effective and ineffective behaviors observed among anesthesia residents during the twelve months prior to the interview. Interviews initially held with 34 anesthesiologists generated 172 incidents. These incidents formed the basis for a categorization analysis performed by two anesthesiologists. Six categories were developed: preparedness, interpersonal skills, response to teaching, data monitoring, technical skills, and emergency situations. Validation of these categories was confirmed with three subsequent interviews, in which 92 anesthesiologists generated 475 incidents. Most incidents were found to conform to the previously defined categories using a reallocation index with a range of 0.70 to 0.80. The category "technical skills" fell below the defined range. Over 60 percent of the incidents involved noncognitive personal attributes: preparedness, interpersonal skills, and response to teaching. Effective behavior in six categories identifies an applicant's aptitude for anesthesia. Selection of residents may be enhanced by routinely assessing noncognitive characteristics.

Methodology of a population-based stroke and TIA incidence and outcomes study: the Auckland Regional Community Stroke Study (ARCOS IV) 2011-2012.

Science.gov (United States)

Krishnamurthi, Rita; Jones, Amy; Barber, P Alan; Barker-Collo, Suzanne; McPherson, Kathryn; Bennett, Derrick; Rush, Elaine; Suh, Flora; Starkey, Nicola; Theadom, Alice; Parag, Varsha; Rathnasabapathy, Yogini; Feigin, Valery L

2014-01-01

Stroke is a leading cause of death and disability worldwide. Stroke burden is immense as it leads to premature deaths, leaves survivors with ongoing disabilities, and has a major financial impact on the individual, their families, and the community. Reliable, high-quality evidence is needed on stroke risk factors, incidence, and outcomes to provide information on how best to reduce this burden. Population-based studies are regarded as the 'gold-standard' of measuring disease burden but are not common due to the logistical and financial challenges they present. The Auckland Regional Community Stroke Studies are among a few in the world that have been carried out at a population level and at regular intervals. The aim of the fourth Auckland Regional Community Stroke Studies IV is to examine the current measures of stroke incidence, prevalence, and outcomes as well the trends over four decades. This article describes the methodology of the Auckland Regional Community Stroke Studies IV with stroke and transient ischemic attacks cases registered over a 12-month period from March 1, 2011 to February 29, 2012. The methodology described may be used as a guide in order to design similar population-based stroke incidence and outcome studies in other countries and populations, thus facilitating the collection of most consistent and accurate stroke epidemiological data. © 2013 The Authors. International Journal of Stroke © 2013 World Stroke Organization.

Group techniques as a methodological strategy in acquiring teamwork abilities by college students

Directory of Open Access Journals (Sweden)

César Torres Martín

2013-02-01

Full Text Available From the frame of the European Higher Education Space an adaptation of teaching-learning process is being promoted by means of the pedagogical renewal, introducing into the class a major number of active or participative methodologies in order to provide students with a major autonomy in said process. This requires taking into account the incorporation of basic skills within university curriculum, especially “teamwork”. By means of group techniques students can acquire interpersonal and cognitive skills, as well as abilities that will enable them to face different group situations throughout their academic and professional career. These techniques are necessary not only as a methodological strategy in the classroom, but also as a reflection instrument for students to assess their behavior in group, with an aim to modify conduct strategies that make that relationship with others influences their learning process. Hence the importance of this ability to sensitize students positively for collective work. Thus using the research-action method in the academic classroom during one semester and making systematic intervention with different group techniques, we manage to present obtained results by means of an analysis of the qualitative data, where the selected instruments are group discussion and personal reflection.

[Patient satisfaction in hospital: critical incident technique or standardised questionnaire?].

Science.gov (United States)

Eckhardt-Abdulla, R; Bock, M; Bauer, M

2008-03-01

Questionnaires are usually used for the measurement of patient satisfaction, however, it is increasingly being recognized that the critical incident technique (CIT) also provides valuable insight. Questionnaires of the "Hamburger questionnaire on hospital stay" were distributed to 650 consecutive patients before discharge. Additionally 103 interviews were conducted in which the patients were asked to describe positive and negative incidents during their hospital stay. The results of both methods were then compared. A total of 369 patients returned the questionnaire and 103 patients participated in the interviews. The duration of a single interview was between 5 and 45 min with a mean of 12.7 min+/-10.1 min standard deviation (SD). Cronbach's alpha of the questionnaire was 0.9. A total of 424 incidents were reported, 301 of them were negative compared to 123 positive events. The questionnaires and interviews yielded partly similar and partly different results at category and subcategory levels concerning the areas of weaknesses and strengths in quality performance. The CIT was more concrete but did not give results for all aspects of quality. The CIT, but not the questionnaire, was able to detect 40/56 (71%) of the positive and 33/75 (44%) of the negative reports regarding medical performance and 25/42 (60%) of the positive and 15/51 (29.4%) of the negative reports of the performance of the nurses were revealed by the CIT and not by the questionnaires. The CIT gives valuable insights into the patient's perspective of strengths and weaknesses in hospital care, which might be overlooked by the questionnaire alone. However, the CIT is probably not suited for routine use because it is very time-consuming.

Incidence of vascular complications during lateral lumbar interbody fusion: an examination of the mini-open access technique.

Science.gov (United States)

Kueper, Janina; Fantini, Gary A; Walker, Brendon R; Aichmair, Alexander; Hughes, Alexander P

2015-04-01

This article examines the incidence and management of vascular injury during Lateral Lumbar Interbody Fusion (LLIF). The details of the mini-open access technique are presented. A total of 900 patients who underwent a LLIF at an average 1.94 levels (range: 1-5 levels) by one of six fellowship trained surgeons on 1,754 levels from 2006 to 2013 were identified. The incidence of intraoperative vascular injury was retrospectively determined from the Operative Records. The management of vascular injury was evaluated. The mini-open access adapted by our institution for LLIF is described. The incidence of major vascular complication in our series was 1/900. The incidence of minor vascular injury was 4/900. The overall incidence of vascular injury was calculated to be 0.056 % per case and 0.029 % per level. All minor vascular injuries were identified to be segmental vessel lacerations, which were readily ligated under direct visualization without further extension of the incision with no clinical sequelae. The laceration of the abdominal aorta, the major vascular complication of this series, was emergently repaired through an exploratory laparotomy. None of the patients suffered long-term sequelae from their intraoperative vascular injuries. The mini-open lateral access technique for LLIF provides for minimal risk of vascular injury to the lumbar spine. In the rare event of minor vascular injury, the mini-open access approach allows for immediate visualization, confirmation and repair of the vessel with no long-term sequelae.

The investigation of leukaemia incidence around sites of special interest

International Nuclear Information System (INIS)

Urquhart, J.

1991-01-01

The study of the incidence of leukaemia and non-Hodgkin's lymphoma around sites of special interest has created many methodological and philosophical problems. Not least of these is the construction of boundaries of space and time to delineate areas of study around a point source of interest. Studies such as those of the incidence of childhood leukaemia around Dounreay have made use of arbitrarily selected fixed geographic boundaries. The Poisson maximum method proposed by Stone and Bithell provides an alternative approach in which no prior selection of geographic boundaries is required. The application of an adaptation of this method to each of the Scottish nuclear sites confirmed the results found for Dounreay by other methods. No excess incidence was observed around the Hunterston Nuclear Installation and an observed excess incidence around Chapelcross was not statistically significant. The further development of statistical techniques which do not require the arbitrary selection of boundaries will facilitate the monitoring of the incidence of disease around sites of special interest and perhaps permit it to be carried out in a less combative climate than has hitherto been the case. (author)

Risk Prediction Models for Incident Heart Failure: A Systematic Review of Methodology and Model Performance.

Science.gov (United States)

Sahle, Berhe W; Owen, Alice J; Chin, Ken Lee; Reid, Christopher M

2017-09-01

Numerous models predicting the risk of incident heart failure (HF) have been developed; however, evidence of their methodological rigor and reporting remains unclear. This study critically appraises the methods underpinning incident HF risk prediction models. EMBASE and PubMed were searched for articles published between 1990 and June 2016 that reported at least 1 multivariable model for prediction of HF. Model development information, including study design, variable coding, missing data, and predictor selection, was extracted. Nineteen studies reporting 40 risk prediction models were included. Existing models have acceptable discriminative ability (C-statistics > 0.70), although only 6 models were externally validated. Candidate variable selection was based on statistical significance from a univariate screening in 11 models, whereas it was unclear in 12 models. Continuous predictors were retained in 16 models, whereas it was unclear how continuous variables were handled in 16 models. Missing values were excluded in 19 of 23 models that reported missing data, and the number of events per variable was models. Only 2 models presented recommended regression equations. There was significant heterogeneity in discriminative ability of models with respect to age (P prediction models that had sufficient discriminative ability, although few are externally validated. Methods not recommended for the conduct and reporting of risk prediction modeling were frequently used, and resulting algorithms should be applied with caution. Copyright © 2017 Elsevier Inc. All rights reserved.

Developing Flanagan's critical incident technique to elicit indicators of high and low quality nursing care from patients and their nurses.

Science.gov (United States)

Norman, I J; Redfern, S J; Tomalin, D A; Oliver, S

1992-05-01

This paper discusses a development of Flanagan's critical incident technique (CIT) to elicit indicators of high and low quality nursing from patients and their nurses on medical, surgical and elderly care wards. Stages in undertaking the CIT are identified and presuppositions held by most researchers about the nature of the technique are identified. The paper describes how the authors moved to a different set of presuppositions during the course of the study. Preliminary analysis of interview transcripts revealed that critical incidents need not always be demarcated scenes with a clear beginning and end, but may arise from respondents summarizing their overall experience within their description of one incident. Characteristically respondents were unable to give a detailed account of such incidents but validity may be established by the fact that respondents appear to recount what actually happened as they saw it, and what they said was clearly important to them. The researchers found that the most appropriate basic unit of analysis was not the incident itself but 'happenings' revealed by incidents that are 'critical' by virtue of being important to respondents with respect to the quality of nursing care. The importance of CIT researchers achieving an understanding of the 'meaning' of critical happenings to respondents is emphasized. Analysis of the interview transcripts is facilitated by the use of INGRES, a relational database computer program which should enable a 'personal theory' of quality nursing for each respondent, both patients and nurses, to be described. The study suggests that the CIT is a flexible technique which may be adapted to meet the demands of nursing research. If carefully applied, the CIT seems capable of capitalizing on respondents' own stories and avoids the loss of information which occurs when complex narratives are reduced to simple descriptive categories. Patients and nurses have unique perspectives on nursing and their views are of

Ion-induced nanopatterns on semiconductor surfaces investigated by grazing incidence x-ray scattering techniques

Energy Technology Data Exchange (ETDEWEB)

Carbone, D; Metzger, T H [ID01, ESRF, 6 rue Jules Horowitz, F-38043 Grenoble Cedex (France); Biermanns, A; Pietsch, U [Festkoerperphysik, Universitaet Siegen, D-57068 Siegen (Germany); Ziberi, B; Frost, F [Leibniz-Institut fuer Oberflaechenmodifizierung e.V., D-04318 Leipzig (Germany); Plantevin, O [Universite Paris-Sud, Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse, UMR 8609, F-91405 Orsay (France)], E-mail: gcarbone@esrf.fr

2009-06-03

In this review we cover and describe the application of grazing incidence x-ray scattering techniques to study and characterize nanopattern formation on semiconductor surfaces by ion beam erosion under various conditions. It is demonstrated that x-rays under grazing incidence are especially well suited to characterize (sub)surface structures on the nanoscale with high spatial and statistical accuracy. The corresponding theory and data evaluation is described in the distorted wave Born approximation. Both ex situ and in situ studies are presented, performed with the use of a specially designed sputtering chamber which allows us to follow the temporal evolution of the nanostructure formation. Corresponding results show a general stabilization of the ordering wavelength and the extension of the ordering as a function of the ion energy and fluence as predicted by theory. The in situ measurements are especially suited to study the early stages of pattern formation, which in some cases reveal a transition from dot to ripple formation. For the case of medium energy ions crystalline ripples are formed buried under a semi-amorphous thick layer with a ripple structure at the surface being conformal with the crystalline/amorphous interface. Here, the x-ray techniques are especially advantageous since they are non-destructive and bulk-sensitive by their very nature. In addition, the GI x-ray techniques described in this review are a unique tool to study the evolving strain, a topic which remains to be explored both experimentally and theoretically.

Critical incidents connected to nurses’ leadership in Intensive Care Units

Directory of Open Access Journals (Sweden)

Elaine Cantarella Lima

Full Text Available ABSTRACT Objective: The goal of this study is to analyze nurses’ leadership in intensive care units at hospitals in the state of São Paulo, Brazil, in the face of positive and negative critical incidents. Method: Exploratory, descriptive study, conducted with 24 nurses by using the Critical Incident Technique as a methodological benchmark. Results: Results were grouped into 61 critical incidents distributed into categories. Researchers came to the conclusion that leadership-related situations interfere with IC nurses’ behaviors. Among these situations they found: difficulty in the communication process; conflicts in the daily exercise of nurses’ activities; people management; and the setting of high quality care targets. Final considerations: Researchers identified a mixed leadership model, leading them to the conclusion that nurses’ knowledge and practice of contemporary leadership theories/styles are crucial because they facilitate the communication process, focusing on behavioral aspects and beliefs, in addition to valuing flexibility. This positively impacts the organization’s results.

Factors influencing patient compliance with therapeutic regimens in chronic heart failure: A critical incident technique analysis.

Science.gov (United States)

Strömberg, A; Broström, A; Dahlström, U; Fridlund, B

1999-01-01

The aim of this study was to identify factors influencing compliance with prescribed treatment in patients with chronic heart failure. A qualitative design with a critical incident technique was used. Incidents were collected through interviews with 25 patients with heart failure strategically selected from a primary health care clinic, a medical ward, and a specialist clinic. Two hundred sixty critical incidents were identified in the interviews and 2 main areas emerged in the analysis: inward factors and outward factors. The inward factors described how compliance was influenced by the personality of the patient, the disease, and the treatment. The outward factors described how compliance was influenced by social activities, social relationships, and health care professionals. By identifying the inward and outward factors influencing patients with chronic heart failure, health care professionals can assess whether intervention is needed to increase compliance.

An isodose shift technique for obliquely incident electron beams

International Nuclear Information System (INIS)

Ulin, K.; Sternick, E.S.

1989-01-01

It is well known that when an electron beam is incident obliquely on the surface of a phantom, the depth dose curve measured normal to the surface is shifted toward the surface. Based on geometrical arguments alone, the depth of the nth isodose line for an electron beam incident at an angle θ should be equal to the product of cos θ and the depth of the nth isodose line at normal incidence. This method, however, ignores the effects of scatter and can lead to significant errors in isodose placement for beams at large angles of incidence. A semi-empirical functional relationship and a table of isodose shift factors have been developed with which one may easily calculate the depth of any isodose line for beams at incident angles of 0 degree to 60 degree. The isodose shift factors are tabulated in terms of beam energy (6--22 MeV) and isodose line (10%--90%) and are shown to be relatively independent of beam size and incident angle for angles <60 degree. Extensive measurements have been made on a Varian Clinac 2500 linear accelerator with a parallel-plate chamber and polystyrene phantom. The dependence of the chamber response on beam angulation has been checked, and the scaling factor of the polystyrene phantom has been determined to be equal to 1.00

Multi-step polynomial regression method to model and forecast malaria incidence.

Directory of Open Access Journals (Sweden)

Chandrajit Chatterjee

Full Text Available Malaria is one of the most severe problems faced by the world even today. Understanding the causative factors such as age, sex, social factors, environmental variability etc. as well as underlying transmission dynamics of the disease is important for epidemiological research on malaria and its eradication. Thus, development of suitable modeling approach and methodology, based on the available data on the incidence of the disease and other related factors is of utmost importance. In this study, we developed a simple non-linear regression methodology in modeling and forecasting malaria incidence in Chennai city, India, and predicted future disease incidence with high confidence level. We considered three types of data to develop the regression methodology: a longer time series data of Slide Positivity Rates (SPR of malaria; a smaller time series data (deaths due to Plasmodium vivax of one year; and spatial data (zonal distribution of P. vivax deaths for the city along with the climatic factors, population and previous incidence of the disease. We performed variable selection by simple correlation study, identification of the initial relationship between variables through non-linear curve fitting and used multi-step methods for induction of variables in the non-linear regression analysis along with applied Gauss-Markov models, and ANOVA for testing the prediction, validity and constructing the confidence intervals. The results execute the applicability of our method for different types of data, the autoregressive nature of forecasting, and show high prediction power for both SPR and P. vivax deaths, where the one-lag SPR values plays an influential role and proves useful for better prediction. Different climatic factors are identified as playing crucial role on shaping the disease curve. Further, disease incidence at zonal level and the effect of causative factors on different zonal clusters indicate the pattern of malaria prevalence in the city

Reduction of Complications of Local Anaesthesia in Dental Healthcare Setups by Application of the Six Sigma Methodology: A Statistical Quality Improvement Technique.

Science.gov (United States)

Akifuddin, Syed; Khatoon, Farheen

2015-12-01

Health care faces challenges due to complications, inefficiencies and other concerns that threaten the safety of patients. The purpose of his study was to identify causes of complications encountered after administration of local anaesthesia for dental and oral surgical procedures and to reduce the incidence of complications by introduction of six sigma methodology. DMAIC (Define, Measure, Analyse, Improve and Control) process of Six Sigma was taken into consideration to reduce the incidence of complications encountered after administration of local anaesthesia injections for dental and oral surgical procedures using failure mode and effect analysis. Pareto analysis was taken into consideration to analyse the most recurring complications. Paired z-sample test using Minitab Statistical Inference and Fisher's exact test was used to statistically analyse the obtained data. The p-value six sigma improvement methodology in healthcare tends to deliver consistently better results to the patients as well as hospitals and results in better patient compliance as well as satisfaction.

Damage detection methodology under variable load conditions based on strain field pattern recognition using FBGs, nonlinear principal component analysis, and clustering techniques

Science.gov (United States)

Sierra-Pérez, Julián; Torres-Arredondo, M.-A.; Alvarez-Montoya, Joham

2018-01-01

Structural health monitoring consists of using sensors integrated within structures together with algorithms to perform load monitoring, damage detection, damage location, damage size and severity, and prognosis. One possibility is to use strain sensors to infer structural integrity by comparing patterns in the strain field between the pristine and damaged conditions. In previous works, the authors have demonstrated that it is possible to detect small defects based on strain field pattern recognition by using robust machine learning techniques. They have focused on methodologies based on principal component analysis (PCA) and on the development of several unfolding and standardization techniques, which allow dealing with multiple load conditions. However, before a real implementation of this approach in engineering structures, changes in the strain field due to conditions different from damage occurrence need to be isolated. Since load conditions may vary in most engineering structures and promote significant changes in the strain field, it is necessary to implement novel techniques for uncoupling such changes from those produced by damage occurrence. A damage detection methodology based on optimal baseline selection (OBS) by means of clustering techniques is presented. The methodology includes the use of hierarchical nonlinear PCA as a nonlinear modeling technique in conjunction with Q and nonlinear-T 2 damage indices. The methodology is experimentally validated using strain measurements obtained by 32 fiber Bragg grating sensors bonded to an aluminum beam under dynamic bending loads and simultaneously submitted to variations in its pitch angle. The results demonstrated the capability of the methodology for clustering data according to 13 different load conditions (pitch angles), performing the OBS and detecting six different damages induced in a cumulative way. The proposed methodology showed a true positive rate of 100% and a false positive rate of 1.28% for a

Application of Bow-tie methodology to improve patient safety.

Science.gov (United States)

Abdi, Zhaleh; Ravaghi, Hamid; Abbasi, Mohsen; Delgoshaei, Bahram; Esfandiari, Somayeh

2016-05-09

Purpose - The purpose of this paper is to apply Bow-tie methodology, a proactive risk assessment technique based on systemic approach, for prospective analysis of the risks threatening patient safety in intensive care unit (ICU). Design/methodology/approach - Bow-tie methodology was used to manage clinical risks threatening patient safety by a multidisciplinary team in the ICU. The Bow-tie analysis was conducted on incidents related to high-alert medications, ventilator associated pneumonia, catheter-related blood stream infection, urinary tract infection, and unwanted extubation. Findings - In total, 48 potential adverse events were analysed. The causal factors were identified and classified into relevant categories. The number and effectiveness of existing preventive and protective barriers were examined for each potential adverse event. The adverse events were evaluated according to the risk criteria and a set of interventions were proposed with the aim of improving the existing barriers or implementing new barriers. A number of recommendations were implemented in the ICU, while considering their feasibility. Originality/value - The application of Bow-tie methodology led to practical recommendations to eliminate or control the hazards identified. It also contributed to better understanding of hazard prevention and protection required for safe operations in clinical settings.

Tissue printing technique in nitrocelullose membranes: a rapid detection technique for estimating incidence of PVX, PVY, PVS and PLRV viruses infecting potato (Solanum spp.

Directory of Open Access Journals (Sweden)

Mónica Guzmán

2002-07-01

Full Text Available The ELISA serological technique has been used since the 1970s as a quantative technique for the detection of many groups of virus which infect plants. The immune-impression (IMI in nitrocelullose membrane qualitative technique has been implemented more recently for the detection of different viral groups. In this work, the IMI technique has been adapted for the detection of PVX, PVY PVS and PLRV viruses which attack different species and varieties of potato crop (Solanum spp., such as Egg yolk, Capiro, Morita, Pastusa, Monserrate, Tuquerreña, ICA Puracé and ICA Nariño, all from the Nariño department. The four viruses mentioned above can cause 30% and 60% losses in production, be they acting alone or synergistically. This means that they can easily reduce the economic benefits of a country like Colombia, characterised as being a great potato producer (i.e. more than 2.8 million tons per year. The IMI technique was compared with the ELISA technique (Enzymne Linked Immunosorbent Assay using the same samples, leading to confirmation of the test's sensitivity for detecting the virus. From a total of 800 samples analyzed by IMI from different areas in the Nariño department, 72% incidence for PVY, 38.7% for PVX, 85.6% for PVS and 91.1% for PLRV was found; these estimates were similar or greater than those obtained using ELISA. These results are new for Colombia in terms of imple-menting the easy and sensitive IMI technique for detecting these four viral groups infecting the potato as well as estimating their incidence in Nariño, one of Colombia's most important potato-producing departments. The opportune and flexible detection of virus leads to an effective response to eradicating contaminated material, both material in the field as well as that from in vitro culture. Results lead to it being suggested that implementing IMI could bringing wide benefits for potato seed certification programmes, as they maintain sensitivity and specificity, they

Development of methodology for certification of Type B shipping containers using analytical and testing techniques

International Nuclear Information System (INIS)

Sharp, R.R.; Varley, D.T.

1992-01-01

The Analysis and Testing Group (WX-11) of the Design Engineering Division at Los Alamos National Laboratory (LANL) is developing methodology for designing and providing a basis for certification of Type B shipping containers. This methodology will include design, analysis, testing, fabrication, procurement, and obtaining certification of the Type B containers, allowing usage in support of the United States Department of Energy programs. While all aspects of the packaging development are included in this methodology, this paper focuses on the use of analysis and testing techniques for enhancing the design and providing a basis for certification. This methodology is based on concurrent engineering principles. Multidisciplinary teams within LANL are responsible for the design and certification of specific Type B Radioactive Material Shipping Containers. These teams include personnel with the various backgrounds and areas of expertise required to support the design, testing, analysis and certification tasks. To demonstrate that a package can pass all the performance requirements, the design needs to be characterized as completely as possible. Understanding package responses to the various environments and how these responses influence the effectiveness of the packaging requires expertise in several disciplines. In addition to characterizing the shipping container designs, these multidisciplinary teams should be able to provide insight into improving new package designs

Methodological integrative review of the work sampling technique used in nursing workload research.

Science.gov (United States)

Blay, Nicole; Duffield, Christine M; Gallagher, Robyn; Roche, Michael

2014-11-01

To critically review the work sampling technique used in nursing workload research. Work sampling is a technique frequently used by researchers and managers to explore and measure nursing activities. However, work sampling methods used are diverse making comparisons of results between studies difficult. Methodological integrative review. Four electronic databases were systematically searched for peer-reviewed articles published between 2002-2012. Manual scanning of reference lists and Rich Site Summary feeds from contemporary nursing journals were other sources of data. Articles published in the English language between 2002-2012 reporting on research which used work sampling to examine nursing workload. Eighteen articles were reviewed. The review identified that the work sampling technique lacks a standardized approach, which may have an impact on the sharing or comparison of results. Specific areas needing a shared understanding included the training of observers and subjects who self-report, standardization of the techniques used to assess observer inter-rater reliability, sampling methods and reporting of outcomes. Work sampling is a technique that can be used to explore the many facets of nursing work. Standardized reporting measures would enable greater comparison between studies and contribute to knowledge more effectively. Author suggestions for the reporting of results may act as guidelines for researchers considering work sampling as a research method. © 2014 John Wiley & Sons Ltd.

Evaluating and improving incident management using historical incident data : case studies at Texas transportation management centers.

Science.gov (United States)

2009-08-01

The companion guidebook (0-5485-P2) developed as part of this study provides the procedures and : methodologies for effective use of historical incident data at Texas Transportation Management Centers : (TMCs). This research report documents the resu...

RTL validation methodology on high complexity wireless microcontroller using OVM technique for fast time to market

Science.gov (United States)

Zhafirah Muhammad, Nurul; Harun, A.; Hambali, N. A. M. A.; Murad, S. A. Z.; Mohyar, S. N.; Isa, M. N.; Jambek, AB

2017-11-01

Increased demand in internet of thing (IOT) application based has inadvertently forced the move towards higher complexity of integrated circuit supporting SoC. Such spontaneous increased in complexity poses unequivocal complicated validation strategies. Hence, the complexity allows researchers to come out with various exceptional methodologies in order to overcome this problem. This in essence brings about the discovery of dynamic verification, formal verification and hybrid techniques. In reserve, it is very important to discover bugs at infancy of verification process in (SoC) in order to reduce time consuming and fast time to market for the system. Ergo, in this paper we are focusing on the methodology of verification that can be done at Register Transfer Level of SoC based on the AMBA bus design. On top of that, the discovery of others verification method called Open Verification Methodology (OVM) brings out an easier way in RTL validation methodology neither as the replacement for the traditional method yet as an effort for fast time to market for the system. Thus, the method called OVM is proposed in this paper as the verification method for larger design to avert the disclosure of the bottleneck in validation platform.

Effective classroom teaching methods: a critical incident technique from millennial nursing students' perspective.

Science.gov (United States)

Robb, Meigan

2014-01-11

Engaging nursing students in the classroom environment positively influences their ability to learn and apply course content to clinical practice. Students are motivated to engage in learning if their learning preferences are being met. The methods nurse educators have used with previous students in the classroom may not address the educational needs of Millennials. This manuscript presents the findings of a pilot study that used the Critical Incident Technique. The purpose of this study was to gain insight into the teaching methods that help the Millennial generation of nursing students feel engaged in the learning process. Students' perceptions of effective instructional approaches are presented in three themes. Implications for nurse educators are discussed.

Assessment of proliferation resistances of aqueous reprocessing techniques using the TOPS methodology

International Nuclear Information System (INIS)

Åberg Lindell, M.; Grape, S.; Håkansson, A.; Jacobsson Svärd, S.

2013-01-01

Highlights: • Proliferation resistances of three possible LFR fuel cycles are assessed. • The TOPS methodology has been chosen for the PR assessment. • Reactor operation, reprocessing and fuel fabrication are examined. • Purex, Ganex, and a combination of Purex, Diamex and Sanex, are compared. • The safeguards analysis speaks in favor of Ganex as opposed to the Purex process. - Abstract: The aim of this study is to assess and compare the proliferation resistances (PR) of three possible Generation IV lead-cooled fast reactor fuel cycles, involving the reprocessing techniques Purex, Ganex and a combination of Purex, Diamex and Sanex, respectively. The examined fuel cycle stages are reactor operation, reprocessing and fuel fabrication. The TOPS methodology has been chosen for the PR assessment, and the only threat studied is the case where a technically advanced state diverts nuclear material covertly. According to the TOPS methodology, the facilities have been divided into segments, here roughly representing the different forms of nuclear material occurring in each examined fuel cycle stage. For each segment, various proliferation barriers have been assessed. The results make it possible to pinpoint where the facilities can be improved. The results show that the proliferation resistance of a fuel cycle involving recycling of minor actinides is higher than for the traditional Purex reprocessing cycle. Furthermore, for the purpose of nuclear safeguards, group actinide extraction should be preferred over reprocessing options where pure plutonium streams occur. This is due to the fact that a solution containing minor actinides is less attractive to a proliferator than a pure Pu solution. Thus, the safeguards analysis speaks in favor of Ganex as opposed to the Purex process

Alcohol consumption and prostate cancer incidence and progression

DEFF Research Database (Denmark)

Brunner, Clair; Davies, Neil M; Martin, Richard M

2017-01-01

Prostate cancer is the most common cancer in men in developed countries, and is a target for risk reduction strategies. The effects of alcohol consumption on prostate cancer incidence and survival remain unclear, potentially due to methodological limitations of observational studies. In this stud...... consumption is unlikely to affect prostate cancer incidence, but it may influence disease progression....

Methodology for qualitative content analysis with the technique of mind maps using Nvivo and FreeMind softwares

Directory of Open Access Journals (Sweden)

José Leonardo Oliveira Lima

2016-12-01

Full Text Available Introduction: In a survey it is not enough choosing tools, resources and procedures. It is important to understand the method beyond the technics and their relationship with philosophy, epistemology and methodology. Objective: To discuss theoretical and methodological concerns on Qualitative Research in Information Science and the process of Qualitative Content Analysis (QCA at User Studies field and to show a followed path of QCA integrated with Mind Maps technic for developing categories and indicators, by using Qualitative Data Analysis Software (QDAS and Mind Maps designing tools. Methodology: The research was descriptive, methodological, bibliographical and fieldwork conducted with open interviews that were processed using the QCA method with the support of QDAS Nvivo and FreeMind Software for Mind Map design. Results: It is shown the theory of qualitative research and QCA and a methodological path of QCA by using techniques and software mentioned above. Conclusions: When it comes to qualitative researches, the theoretical framework suggests the need of more dialogue among Information Science and other disciplines. The process of QCA evidenced: a viable path that might help further related investigations using the QDAS; the contribution of Mind Maps and their design softwares to develop the indicators and categories of QCA.

RTL validation methodology on high complexity wireless microcontroller using OVM technique for fast time to market

Directory of Open Access Journals (Sweden)

Muhammad Nurul Zhafirah

2017-01-01

Full Text Available Increased demand in internet of thing (IOT application based has inadvertently forced the move towards higher complexity of integrated circuit supporting SoC. Such spontaneous increased in complexity poses unequivocal complicated validation strategies. Hence, the complexity allows researchers to come out with various exceptional methodologies in order to overcome this problem. This in essence brings about the discovery of dynamic verification, formal verification and hybrid techniques. In reserve, it is very important to discover bugs at infancy of verification process in (SoC in order to reduce time consuming and fast time to market for the system. Ergo, in this paper we are focusing on the methodology of verification that can be done at Register Transfer Level of SoC based on the AMBA bus design. On top of that, the discovery of others verification method called Open Verification Methodology (OVM brings out an easier way in RTL validation methodology neither as the replacement for the traditional method yet as an effort for fast time to market for the system. Thus, the method called OVM is proposed in this paper as the verification method for larger design to avert the disclosure of the bottleneck in validation platform.

How Organisations Learn from Safety Incidents: A Multifaceted Problem

Science.gov (United States)

Lukic, Dane; Margaryan, Anoush; Littlejohn, Allison

2010-01-01

Purpose: This paper seeks to review current approaches to learning from health and safety incidents in the workplace. The aim of the paper is to identify the diversity of approaches and analyse them in terms of learning aspects. Design/methodology/approach: A literature review was conducted searching for terms incident/accident/near…

Ionospheric Oblique Incidence Soundings by Satellites

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The oblique incidence sweep-frequency ionospheric sounding technique uses the same principle of operation as the vertical incidence sounder. The primary difference...

Accelerated Testing Methodology in Constant Stress-Rate Testing for Advanced Structural Ceramics: A Preloading Technique

Science.gov (United States)

Choi, Sung R.; Gyekenyesi, John P.; Huebert, Dean; Bartlett, Allen; Choi, Han-Ho

2001-01-01

Preloading technique was used as a means of an accelerated testing methodology in constant stress-rate (dynamic fatigue) testing for two different brittle materials. The theory developed previously for fatigue strength as a function of preload was further verified through extensive constant stress-rate testing for glass-ceramic and CRT glass in room temperature distilled water. The preloading technique was also used in this study to identify the prevailing failure mechanisms at elevated temperatures, particularly at lower test rates in which a series of mechanisms would be associated simultaneously with material failure, resulting in significant strength increase or decrease. Two different advanced ceramics including SiC whisker-reinforced composite silicon nitride and 96 wt% alumina were used at elevated temperatures. It was found that the preloading technique can be used as an additional tool to pinpoint the dominant failure mechanism that is associated with such a phenomenon of considerable strength increase or decrease.

Incident Investigation in SMS and FRMS

NARCIS (Netherlands)

Stewart, S.; Koornneef, F.; Akselsson, R.; Kingston, J.; Stewart, D.

2009-01-01

Chapter 4: Incident Investigation in SMS and FRMS The European Commission HILAS project (Human Integration into the Lifecycle of Aviation Systems - a project supported by the European Commission’s 6th Framework between 2005-2009) was focused on using human factors knowledge and methodology to

Thresholding: A Pixel-Level Image Processing Methodology Preprocessing Technique for an OCR System for the Brahmi Script

Directory of Open Access Journals (Sweden)

H. K. Anasuya Devi

2006-12-01

Full Text Available In this paper we study the methodology employed for preprocessing the archaeological images. We present the various algorithms used in the low-level processing stage of image analysis for Optical Character Recognition System for Brahmi Script. The image preprocessing technique covered in this paper is thresholding. We also try to analyze the results obtained by the pixel-level processing algorithms.

Towards the methodological optimization of the moss bag technique in terms of contaminants concentrations and replicability values

Science.gov (United States)

Ares, A.; Fernández, J. A.; Carballeira, A.; Aboal, J. R.

2014-09-01

The moss bag technique is a simple and economical environmental monitoring tool used to monitor air quality. However, routine use of the method is not possible because the protocols involved have not yet been standardized. Some of the most variable methodological aspects include (i) selection of moss species, (ii) ratio of moss weight to surface area of the bag, (iii) duration of exposure, and (iv) height of exposure. In the present study, the best option for each of these aspects was selected on the basis of the mean concentrations and data replicability of Cd, Cu, Hg, Pb and Zn measured during at least two exposure periods in environments affected by different degrees of contamination. The optimal choices for the studied aspects were the following: (i) Sphagnum denticulatum, (ii) 5.68 mg of moss tissue for each cm-2 of bag surface, (iii) 8 weeks of exposure, and (iv) 4 m height of exposure. Duration of exposure and height of exposure accounted for most of the variability in the data. The aim of this methodological study was to provide data to help establish a standardized protocol that will enable use of the moss bag technique by public authorities.

Detecting Terrorism Incidence Type from News Summary

DEFF Research Database (Denmark)

Nizamani, Sarwat; Memon, Nasrullah

2012-01-01

The paper presents the experiments to detect terrorism incidence type from news summary data. We have applied classification techniques on news summary data to analyze the incidence and detect the type of incidence. A number of experiments are conducted using various classification algorithms...... and results show that a simple decision tree classifier can learn incidence type with satisfactory results from news data....

Use of casual tree method for investigation of incidents and accidents involving radioactive materials

International Nuclear Information System (INIS)

Vasconcelos, Vanderley de; Senne Junior, Murillo; Marques, Raissa Oliveira

2013-01-01

There are many methodologies used for investigation of accidents to facilitate the search of the factors that cause these events in different areas of industry. These can be called proactive methods, if they are used before the occurrence of the events, or reactive methods that are applied after the occurrence of the incident or accident, and are used as a basis of information to prevent further events. One of these methods is the Causal Tree Method (CTM). The basic idea of this technique is that incidents and accidents result from variations in usual processes. These variations can be related to the individual, the task, the material or the environment. The tree starts with the end event (incident or accident) and works backwards. The facts relating to the end event are used in the construction of the causal tree. The end event is the starting point and only the facts that contributed to the incident or accident should be selected. The analyst has to identify and list the variations and then display them in the analytic tree, showing causal relations. The objective of this paper is to test the application of the CTM method in investigation of incidents and accidents involving radioactive materials, in order to evaluate its efficiency on finding the typical factors causing these events. (author)

Cancer incidence in south-east Nigeria: a report from Nnewi Cancer ...

African Journals Online (AJOL)

Background: This study is the first population based cancer incidence report from a cancer registry in south-east Nigeria. Objective: To evaluate the incidence of some invasive cancers in southeast Nigeria. Methodology: We collected all new cases of invasive cancers between 1st January and 31st December, 2013.

Amniotic fluid embolism incidence, risk factors and outcomes: a review and recommendations

Directory of Open Access Journals (Sweden)

Knight Marian

2012-02-01

Full Text Available Abstract Background Amniotic fluid embolism (AFE is a rare but severe complication of pregnancy. A recent systematic review highlighted apparent differences in the incidence, with studies estimating the incidence of AFE to be more than three times higher in North America than Europe. The aim of this study was to examine population-based regional or national data from five high-resource countries in order to investigate incidence, risk factors and outcomes of AFE and to investigate whether any variation identified could be ascribed to methodological differences between the studies. Methods We reviewed available data sources on the incidence of AFE in Australia, Canada, the Netherlands, the United Kingdom and the USA. Where information was available, the risk factors and outcomes of AFE were examined. Results The reported incidence of AFE ranged from 1.9 cases per 100 000 maternities (UK to 6.1 per 100 000 maternities (Australia. There was a clear distinction between rates estimated using different methodologies. The lowest estimated incidence rates were obtained through validated case identification (range 1.9-2.5 cases per 100 000 maternities; rates obtained from retrospective analysis of population discharge databases were significantly higher (range 5.5-6.1 per 100 000 admissions with delivery diagnosis. Older maternal age and induction of labour were consistently associated with AFE. Conclusions Recommendation 1: Comparisons of AFE incidence estimates should be restricted to studies using similar methodology. The recommended approaches would be either population-based database studies using additional criteria to exclude false positive cases, or tailored data collection using existing specific population-based systems. Recommendation 2: Comparisons of AFE incidence between and within countries would be facilitated by development of an agreed case definition and an agreed set of criteria to minimise inclusion of false positive cases for

Factors affecting fire suppression costs as identified by incident management teams

Science.gov (United States)

Janie Canton-Thompson; Brooke Thompson; Krista Gebert; David Calkin; Geoff Donovan; Greg Jones

2006-01-01

This study uses qualitative sociological methodology to discover information and insights about the role of Incident Management Teams in wildland fire suppression costs. We interviewed 48 command and general staff members of Incident Management Teams throughout the United States. Interviewees were asked about team structure, functioning, and decision making as a...

Students' perceptions of effective learning experiences in dental school: a qualitative study using a critical incident technique.

Science.gov (United States)

Victoroff, Kristin Zakariasen; Hogan, Sarah

2006-02-01

Students' views of their educational experience can be an important source of information for curriculum assessment. Although quantitative methods, particularly surveys, are frequently used to gather such data, fewer studies have employed qualitative methods to examine students' dental education experiences. The purpose of this study is to explore characteristics of effective learning experiences in dental school using a qualitative method. All third-year (seventy) and fourth-year (seventy) dental students enrolled in one midwestern dental school were invited to participate. Fifty-three dental students (thirty-five male and eighteen female; thirty-two third-year and twenty-one fourth-year) were interviewed using a critical incident interview technique. Each student was asked to describe a specific, particularly effective learning incident that he or she had experienced in dental school and a specific, particularly ineffective learning incident, for comparison. Each interview was audiotaped. Students were assured that only the interviewer and one additional researcher would have access to the tapes. Data analysis resulted in identification of key themes in the data describing characteristics of effective learning experiences. The following characteristics of effective learning experiences were identified: 1) instructor characteristics (personal qualities, "checking-in" with students, and an interactive style); 2) characteristics of the learning process (focus on the "big picture," modeling and demonstrations, opportunities to apply new knowledge, high-quality feedback, focus, specificity and relevance, and peer interactions); and 3) learning environment (culture of the learning environment, technology). Common themes emerged across a wide variety of learning incidents. Although additional research is needed, the characteristics of effective learning experiences identified in this study may have implications for individual course design and for the dental school

Methodology for ranking restoration options

DEFF Research Database (Denmark)

Jensen, Per Hedemann

1999-01-01

techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps:-characterisation of relevant contaminated sites -identication and characterisation of relevant restoration...... techniques -assessment of the radiological impact -development and application of a selection methodology for restoration options -formulation ofgeneric conclusions and development of a manual The project is intended to apply to situations in which sites with nuclear installations have been contaminated...

Incident Management in Academic Information System using ITIL Framework

Science.gov (United States)

Palilingan, V. R.; Batmetan, J. R.

2018-02-01

Incident management is very important in order to ensure the continuity of a system. Information systems require incident management to ensure information systems can provide maximum service according to the service provided. Many of the problems that arise in academic information systems come from incidents that are not properly handled. The objective of this study aims to find the appropriate way of incident management. The incident can be managed so it will not be a big problem. This research uses the ITIL framework to solve incident problems. The technique used in this study is a technique adopted and developed from the service operations section of the ITIL framework. The results of this research found that 84.5% of incidents appearing in academic information systems can be handled quickly and appropriately. 15.5% incidents can be escalated so as to not cause any new problems. The model of incident management applied to make academic information system can run quickly in providing academic service in a good and efficient. The incident management model implemented in this research is able to manage resources appropriately so as to quickly and easily manage incidents.

Estimated HIV incidence in the United States, 2006-2009.

Directory of Open Access Journals (Sweden)

Joseph Prejean

Full Text Available BACKGROUND: The estimated number of new HIV infections in the United States reflects the leading edge of the epidemic. Previously, CDC estimated HIV incidence in the United States in 2006 as 56,300 (95% CI: 48,200-64,500. We updated the 2006 estimate and calculated incidence for 2007-2009 using improved methodology. METHODOLOGY: We estimated incidence using incidence surveillance data from 16 states and 2 cities and a modification of our previously described stratified extrapolation method based on a sample survey approach with multiple imputation, stratification, and extrapolation to account for missing data and heterogeneity of HIV testing behavior among population groups. PRINCIPAL FINDINGS: Estimated HIV incidence among persons aged 13 years and older was 48,600 (95% CI: 42,400-54,700 in 2006, 56,000 (95% CI: 49,100-62,900 in 2007, 47,800 (95% CI: 41,800-53,800 in 2008 and 48,100 (95% CI: 42,200-54,000 in 2009. From 2006 to 2009 incidence did not change significantly overall or among specific race/ethnicity or risk groups. However, there was a 21% (95% CI:1.9%-39.8%; p = 0.017 increase in incidence for people aged 13-29 years, driven by a 34% (95% CI: 8.4%-60.4% increase in young men who have sex with men (MSM. There was a 48% increase among young black/African American MSM (12.3%-83.0%; p<0.001. Among people aged 13-29, only MSM experienced significant increases in incidence, and among 13-29 year-old MSM, incidence increased significantly among young, black/African American MSM. In 2009, MSM accounted for 61% of new infections, heterosexual contact 27%, injection drug use (IDU 9%, and MSM/IDU 3%. CONCLUSIONS/SIGNIFICANCE: Overall, HIV incidence in the United States was relatively stable 2006-2009; however, among young MSM, particularly black/African American MSM, incidence increased. HIV continues to be a major public health burden, disproportionately affecting several populations in the United States, especially MSM and racial and

Bow tie methodology: a tool to enhance the visibility and understanding of nuclear safety cases

International Nuclear Information System (INIS)

Vannerem, Marc

2013-01-01

There is much common ground between the nuclear industry and other major hazard industries such as those subject to the Seveso II regulations, e.g. oil, gas and chemicals. They are all subject to legal requirements to identify and control hazards, and to demonstrate that all necessary measures have been taken to minimise risks posed by the site with regard to people and the environment. This places a requirement on the Operators of major hazard installations, whether nuclear or conventional, to understand and identify the hazards of their operations, the initiating events, the consequences, the prevention and mitigation measures. However, in the UK, nuclear and 'Seveso' type facilities seem to adopt a different approach to the presentation of their safety cases. Given the magnitude of the hazards, safety cases developed for nuclear fuel cycle facilities are rigorous, detailed and complex, which can have the effect of reducing the visibility of the key hazards and corresponding protective measures. In contrast, on installations in the oil and gas and chemical industries, a real attempt has been made over recent years to improve the visibility and accessibility of the safety case to all operating personnel, through the use of visual aids / diagrams. In particular, many Operators are choosing to use 'bow tie methodology', in which very simple overview diagrams are produced to illustrate, in a form understandable by all: - what the key hazards are; - the initiating events; - the consequences of an incident; - the barriers or 'Layers of Protection' which prevent an initiating event from developing into an incident; - the barriers or 'Layers of Defence' which mitigate the consequences of an incident, i.e. which prevent the incident from escalating into major consequences. The bow tie method is one of a number of methodologies that can be used to make safety cases more accessible. It is used in this paper to illustrate ways to

EAP-based critical incident stress management: utilization of a practice-based assessment of incident severity level in responding to workplace trauma.

Science.gov (United States)

DeFraia, Gary S

2013-01-01

Central to the field of trauma psychology is assessment of the impact of critical incidents on individuals, as measured by individual symptoms of stress. Accordingly, the trauma literature reflects a proliferation of clinical impact of event scales. Workplace incidents however, affect not only individual employees, but also work organizations, requiring a multi-level response. Critical incident stress management (CISM) is the most prevalent multi-level incident response strategy utilized by organizations, often through specialized CISM units operating within their employee assistance programs (EAPs). While EAP-based CISM units seeks to support both individuals and organizations, studies focused on individual stress dominate the literature, mirroring assessment scales that tend to emphasize clinical as opposed to organizational practice. This research contributes to less-prevalent studies exploring incident characteristics as disruptive to organizations, rather than clinical symptoms as disruptive to individuals. To measure incident disruption, an EAP-based CISM unit developed a critical incident severity scale. By analyzing this unit's extensive practice database, this exploratory study examines how critical incident severity level varies among various types of incidents. Employing the methodology of clinical data mining, this practice-based research generates evidence-informed practice recommendations in the areas of EAP-based CISM intake assessment, organizational consultation and incident response planning.

Unplanned extubations in an intensive care unit: Findings from a critical incident technique.

Science.gov (United States)

Danielis, Matteo; Chiaruttini, Simona; Palese, Alvisa

2018-05-15

Patients on mechanical ventilation are at risk of experiencing a potentially life-threatening unplanned extubation in the intensive care unit, which can lead to arrhythmias, bronchial aspiration, difficulty in reintubation or even sudden cardiac arrest. Although incidence and outcomes of the phenomenon have been documented in several quantitative studies, no studies have investigated the antecedents as experienced by critical care nurses. To gain a greater understanding of the antecedents of unplanned extubations. A qualitative study design involving the critical-incident technique. A total of 10 registered nurses who reported one or more episodes of unplanned extubations were involved in an in-depth interview. According to the nurses' experience, episodes of unplanned extubations are determined by predisposing, precipitating and mediating factors. The predisposing factors have been recognised in the (a) weaning programme (expected/unexpected decreased sedation) and in the (b) patient factors (increased needs due to discomfort, restlessness and desire to communicate). The precipitating factors have been divided into (a) organisational (failures in multi-professional communication), (b) environmental (excessive environmental chaos and barriers preventing direct surveillance) and (c) nursing care factors (ensuring privacy by creating barriers, avoiding disturbing other patients and poor nurse-to-patient ratio). Among the mediating factors, which are affected by the precipitating factors, decreased surveillance and mechanical restraints' use have been identified. Identifying risk factors of unplanned extubation, specifically those that are modifiable, such as increasing interprofessional communication, reducing excessive environment chaos, implementing strategies aimed at overcoming barriers threatening direct surveillance and ensuring appropriate nurse-to-patient ratio, can prevent the occurrence of these events. Copyright © 2018 Elsevier Ltd. All rights reserved.

Poster - 27: Incident Learning Practices in Ontario

Energy Technology Data Exchange (ETDEWEB)

Angers, Crystal; Medlam, Gaylene; Liszewski, Brian; Simniceanu, Carina [The Ottawa Hospital Cancer Centre, Mississauga Halton/Central West Regional Cancer Center, Odette Cancer Centre, Cancer Care Ontario (Canada)

2016-08-15

Purpose: The Radiation Incident and Safety Committee (RISC), established and supported by Cancer Care Ontario (CCO), is responsible for advising the Provincial Head of the Radiation Treatment program on matters relating to provincial reporting of radiation incidents with the goal of improved risk mitigation. Methods: The committee is made up of Radiation Incident Leads (RILs) with representation from each of the 14 radiation medicine programs in the province. RISC routinely meets to review recent critical incidents and to discuss provincial reporting processes and future directions of the committee. Regular face to face meetings have provided an excellent venue for sharing incident learning practices. A summary of the incident learning practices across Ontario has been compiled. Results: Almost all programs in Ontario employ an incident learning committee to review incidents and identify corrective actions or process improvements. Tools used for incident reporting include: paper based reporting, a number of different commercial products and software solutions developed in-house. A wide range of classification schema (data taxonomies) are employed, although most have been influenced by national guidance documents. The majority of clinics perform root cause analyses but utilized methodologies vary significantly. Conclusions: Most programs in Ontario employ a committee approach to incident learning. However, the reporting tools and taxonomies in use vary greatly which represents a significant challenge to provincial reporting. RISC is preparing to adopt the National System for Incident Reporting – Radiation Therapy (NSIR-RT) which will standardize incident reporting and facilitate data analyses aimed at identifying targeted improvement initiatives.

Poster - 27: Incident Learning Practices in Ontario

International Nuclear Information System (INIS)

Angers, Crystal; Medlam, Gaylene; Liszewski, Brian; Simniceanu, Carina

2016-01-01

Purpose: The Radiation Incident and Safety Committee (RISC), established and supported by Cancer Care Ontario (CCO), is responsible for advising the Provincial Head of the Radiation Treatment program on matters relating to provincial reporting of radiation incidents with the goal of improved risk mitigation. Methods: The committee is made up of Radiation Incident Leads (RILs) with representation from each of the 14 radiation medicine programs in the province. RISC routinely meets to review recent critical incidents and to discuss provincial reporting processes and future directions of the committee. Regular face to face meetings have provided an excellent venue for sharing incident learning practices. A summary of the incident learning practices across Ontario has been compiled. Results: Almost all programs in Ontario employ an incident learning committee to review incidents and identify corrective actions or process improvements. Tools used for incident reporting include: paper based reporting, a number of different commercial products and software solutions developed in-house. A wide range of classification schema (data taxonomies) are employed, although most have been influenced by national guidance documents. The majority of clinics perform root cause analyses but utilized methodologies vary significantly. Conclusions: Most programs in Ontario employ a committee approach to incident learning. However, the reporting tools and taxonomies in use vary greatly which represents a significant challenge to provincial reporting. RISC is preparing to adopt the National System for Incident Reporting – Radiation Therapy (NSIR-RT) which will standardize incident reporting and facilitate data analyses aimed at identifying targeted improvement initiatives.

Real-Time, Label-Free Detection of Biomolecular Interactions in Sandwich Assays by the Oblique-Incidence Reflectivity Difference Technique

Directory of Open Access Journals (Sweden)

Yung-Shin Sun

2014-12-01

Full Text Available One of the most important goals in proteomics is to detect the real-time kinetics of diverse biomolecular interactions. Fluorescence, which requires extrinsic tags, is a commonly and widely used method because of its high convenience and sensitivity. However, in order to maintain the conformational and functional integrality of biomolecules, label-free detection methods are highly under demand. We have developed the oblique-incidence reflectivity difference (OI-RD technique for label-free, kinetic measurements of protein-biomolecule interactions. Incorporating the total internal refection geometry into the OI-RD technique, we are able to detect as low as 0.1% of a protein monolayer, and this sensitivity is comparable with other label-free techniques such as surface plasmon resonance (SPR. The unique advantage of OI-RD over SPR is no need for dielectric layers. Moreover, using a photodiode array as the detector enables multi-channel detection and also eliminates the over-time signal drift. In this paper, we demonstrate the applicability and feasibility of the OI-RD technique by measuring the kinetics of protein-protein and protein-small molecule interactions in sandwich assays.

Evaluation of the impact of disease prevention measures: a methodological note on defining incidence rates

Directory of Open Access Journals (Sweden)

Yin-Bun Cheung

2017-04-01

Full Text Available Abstract Background In studies of recurrent events, it is common to consider a person who has suffered a disease episode and received curative treatment to be not at risk of suffering a new episode for a duration of time. It is a common practice to deduct this duration from the person’s observation time in the statistical analysis of the incidence data. Methods We examined the concepts of incidence and protective efficacy from a real life point of view. We developed simple formulae to show the relationship between the incidence rate and protective efficacy between analyses with and without deducting the curative treatment time from the observation time. We used a malaria chemoprevention and a malaria vaccine study, both previously published, to illustrate the differences. Results Applying the formulae we derived to a range of disease incidence that covered the two case studies, we demonstrated the divergence of the two sets of estimates when incidence rate is approximately 1 per person-year or higher. In the malaria chemoprevention study, incidence was 5.40 per person-year after the deduction of curative treatment time from observation time but 4.48 per person-year without the deduction. The chemoprevention offered 56.6 and 50.7% protection calculated with and without the deduction, respectively. In the malaria vaccine study, where disease incidence was much lower than one, the results between the two ways of analysis were similar. For answering real life questions about disease burden in the population in a calendar year and the reduction that may be achieved if an intervention is implemented, the definition without deduction of curative treatment time should be used. Conclusions The practice of deducting curative treatment time from observation time is not wrong, but it is not always the best approach. Investigators should consider the appropriateness of the two analytic procedures in relation to the specific research aims and the intended

Methodology for national risk analysis and prioritization of toxic industrial chemicals.

Science.gov (United States)

Taxell, Piia; Engström, Kerstin; Tuovila, Juha; Söderström, Martin; Kiljunen, Harri; Vanninen, Paula; Santonen, Tiina

2013-01-01

The identification of chemicals that pose the greatest threat to human health from incidental releases is a cornerstone in public health preparedness for chemical threats. The present study developed and applied a methodology for the risk analysis and prioritization of industrial chemicals to identify the most significant chemicals that pose a threat to public health in Finland. The prioritization criteria included acute and chronic health hazards, physicochemical and environmental hazards, national production and use quantities, the physicochemical properties of the substances, and the history of substance-related incidents. The presented methodology enabled a systematic review and prioritization of industrial chemicals for the purpose of national public health preparedness for chemical incidents.

Palliative care nurses' recognition and assessment of patients with delirium symptoms: a qualitative study using critical incident technique.

Science.gov (United States)

Hosie, Annmarie; Agar, Meera; Lobb, Elizabeth; Davidson, Patricia M; Phillips, Jane

2014-10-01

Delirium is prevalent in palliative care inpatient settings and management is often challenging. Despite nurses' integral patient care role, little is known about palliative care nurses' capacity to recognise, assess and respond to patients' delirium symptoms. To explore the experiences, views and practices of inpatient palliative care nurses in delirium recognition and assessment. 30 nurses from nine Australian specialist palliative care inpatient services. Critical incident technique (CIT) guided a series of semi-structured interviews. Prior to interviews participants were given a vignette of a palliative care inpatient with an unrecognised hypoactive delirium, to prompt their recollection and recounting of a similar clinical incident. Clearly recalled and described incidents were analysed using thematic content analysis. 20 of 30 participants recalled and described 28 relevant delirium incidents. Two themes and six sub-themes provide a general description of participants' experiences, views and practice in delirium recognition and assessment. Participants experience distress related to caring for patients with delirium and express compassion and empathy for delirious patients. Enhancing their delirium knowledge, strengthening collaborative multidisciplinary team relationships and better communication are important supports. Some participants, usually those in advance practice roles, describe more comprehensive assessment capabilities that incorporate clinical expertise with whole person awareness, yet systematic and structured delirium screening and assessment processes and application of the delirium diagnosis criteria are largely missing. Use of ambiguous terminology to describe delirium symptoms contributes to ineffective practice. The findings of this study expands our understanding of how palliative care nurses' capacity to recognise and assess patients' delirium symptoms in the inpatient setting could be strengthened. Copyright © 2014 Elsevier Ltd. All

Applicability of contact angle techniques used in the analysis of contact lenses, part 1: comparative methodologies.

Science.gov (United States)

Campbell, Darren; Carnell, Sarah Maria; Eden, Russell John

2013-05-01

Contact angle, as a representative measure of surface wettability, is often employed to interpret contact lens surface properties. The literature is often contradictory and can lead to confusion. This literature review is part of a series regarding the analysis of hydrogel contact lenses using contact angle techniques. Here we present an overview of contact angle terminology, methodology, and analysis. Having discussed this background material, subsequent parts of the series will discuss the analysis of contact lens contact angles and evaluate differences in published laboratory results. The concepts of contact angle, wettability and wetting are presented as an introduction. Contact angle hysteresis is outlined and highlights the advantages in using dynamic analytical techniques over static methods. The surface free energy of a material illustrates how contact angle analysis is capable of providing supplementary surface characterization. Although single values are able to distinguish individual material differences, surface free energy and dynamic methods provide an improved understanding of material behavior. The frequently used sessile drop, captive bubble, and Wilhelmy plate techniques are discussed. Their use as both dynamic and static methods, along with the advantages and disadvantages of each technique, is explained. No single contact angle technique fully characterizes the wettability of a material surface, and the application of complimenting methods allows increased characterization. At present, there is not an ISO standard method designed for soft materials. It is important that each contact angle technique has a standard protocol, as small protocol differences between laboratories often contribute to a variety of published data that are not easily comparable.

Evaluation of undergraduate clinical learning experiences in the subject of pediatric dentistry using critical incident technique.

Science.gov (United States)

Vyawahare, S; Banda, N R; Choubey, S; Parvekar, P; Barodiya, A; Dutta, S

2013-01-01

In pediatric dentistry, the experiences of dental students may help dental educators better prepare graduates to treat the children. Research suggests that student's perceptions should be considered in any discussion of their education, but there has been no systematic examination of India's undergraduate dental students learning experiences. This qualitative investigation aimed to gather and analyze information about experiences in pediatric dentistry from the students' viewpoint using critical incident technique (CIT). The sample group for this investigation came from all 240 3rd and 4th year dental students from all the four dental colleges in Indore. Using CIT, participants were asked to describe at least one positive and one negative experience in detail. They described 308 positive and 359 negative experiences related to the pediatric dentistry clinic. Analysis of the data resulted in the identification of four key factors related to their experiences: 1) The instructor; 2) the patient; 3) the learning process; and 4) the learning environment. The CIT is a useful data collection and analysis technique that provides rich, useful data and has many potential uses in dental education.

Opening up openness: a theoretical sort following critical incidents methodology and a meta-analytic investigation of the trait family measures.

Science.gov (United States)

Connelly, Brian S; Ones, Deniz S; Davies, Stacy E; Birkland, Adib

2014-01-01

Existing taxonomies of Openness's facet structure have produced widely divergent results, and there is limited comprehensive empirical evidence about how Openness-related scales on existing personality inventories align within the 5-factor framework. In Study 1, we used a critical incidents sorting methodology to identify 11 categories of Openness measures; in Study 2, we meta-analyzed the relationships of these categories with global markers of the Big Five traits (utilizing data from 106 samples with a total sample size of N = 35,886). Our results identified 4 true facets of Openness: aestheticism, openness to sensations, nontraditionalism, and introspection. Measures of these facets were unadulterated by variance from other Big Five traits. Many traits frequently conceptualized as facets of Openness (e.g., innovation/creativity, variety-seeking, and tolerance) emerged as trait compounds that, although related to Openness, are also dependent on other Big Five traits. We discuss how Openness should be conceptualized, measured, and studied in light of the empirically based, refined taxonomy emerging from this research.

Linux Incident Response Volatile Data Analysis Framework

Science.gov (United States)

McFadden, Matthew

2013-01-01

Cyber incident response is an emphasized subject area in cybersecurity in information technology with increased need for the protection of data. Due to ongoing threats, cybersecurity imposes many challenges and requires new investigative response techniques. In this study a Linux Incident Response Framework is designed for collecting volatile data…

Failure modes induced by natural radiation environments on DRAM memories: study, test methodology and mitigation technique

International Nuclear Information System (INIS)

Bougerol, A.

2011-05-01

DRAMs are frequently used in space and aeronautic systems. Their sensitivity to cosmic radiations have to be known in order to satisfy reliability requirements for critical applications. These evaluations are traditionally done with particle accelerators. However, devices become more complex with technology integration. Therefore new effects appear, inducing longer and more expensive tests. There is a complementary solution: the pulsed laser, which triggers similar effects as particles. Thanks to these two test tools, main DRAM radiation failure modes were studied: SEUs (Single Event Upset) in memory blocks, and SEFIs (Single Event Functional Interrupt) in peripheral circuits. This work demonstrates the influence of test patterns on SEU and SEFI sensitivities depending on technology used. In addition, this study identifies the origin of the most frequent type of SEFIs. Moreover, laser techniques were developed to quantify sensitive surfaces of the different effects. This work led to a new test methodology for industry, in order to optimize test cost and efficiency using both pulsed laser beams and particle accelerators. Finally, a new fault tolerant technique is proposed: based on DRAM cell radiation immunity when discharged, this technique allows to correct all bits of a logic word. (author)

Joint application of AI techniques, PRA and disturbance analysis methodology to problems in the maintenance and design of nuclear power plants

International Nuclear Information System (INIS)

Okrent, D.

1989-01-01

This final report summarizes the accomplishments of a two year research project entitled ''Joint Application of Artificial Intelligence Techniques, Probabilistic Risk Analysis, and Disturbance Analysis Methodology to Problems in the Maintenance and Design of Nuclear Power Plants. The objective of this project is to develop and apply appropriate combinations of techniques from artificial intelligence, (AI), reliability and risk analysis and disturbance analysis to well-defined programmatic problems of nuclear power plants. Reactor operations issues were added to those of design and maintenance as the project progressed

Joint application of AI techniques, PRA and disturbance analysis methodology to problems in the maintenance and design of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Okrent, D.

1989-03-01

This final report summarizes the accomplishments of a two year research project entitled Joint Application of Artificial Intelligence Techniques, Probabilistic Risk Analysis, and Disturbance Analysis Methodology to Problems in the Maintenance and Design of Nuclear Power Plants. The objective of this project is to develop and apply appropriate combinations of techniques from artificial intelligence, (AI), reliability and risk analysis and disturbance analysis to well-defined programmatic problems of nuclear power plants. Reactor operations issues were added to those of design and maintenance as the project progressed.

Epidemiology of intestinal parasitosis in Italy between 2005 and 2008: diagnostic techniques and methodologies

Directory of Open Access Journals (Sweden)

Daniele Crotti

2013-04-01

Full Text Available Aim of the study was to keep a real and actual photo relating to 2005-2008 regarding to diagnostic techniques and methodologies for intestinal parasites; so it would be possible to know specific epidemiology and suggest more rational and efficacious guide-lines. All members of AMCLI were involved in the proposal of a retrospective study regarding bowel parasites, helminths and protozoa.To engaged laboratories we asked how O&P was performed, if a specifical research for E. vermicularis and S. stercoralis was performed, if for the identification of D. fragilis, Entamoeba histolytica/dispar and Cryptosporidum spp were performed recommended specific permanent stains. 23 laboratories gave assent; but for an inferior number was possible to use the data for analysis and evaluation. Relating O&P only some laboratories performed permanent stains: Giemsa for D. fragilis, antigen and/or Trichrome stain for E. histolytica/dispar, antigen and/or acid fast stain for Cryptosporidium spp.Not all laboratories research specifically S. stercoralis. So the epidemiology is differentiated and related more to adequate or not adequate techniques than cohorts of examined populations. The overall positivity for parasites ranged from 0% to18.7%,for protozoa (pathogens or not were from 0% to 14.7%; for nematodes from 0% to 3.7%; for cestodes from 0% to 1.0%; for trematodes from 0% to 1.0%.Among helminths, E. vermicularis, followed by S. stercoralis, also in O&P, is the most frequent.The specific research of S. stercoralis gave a positivity from 0% to 33.3%; the cellophane tape test was positive for E. vermicularis from 0% fo 21.9% of cases.Among pathogen protozoa, D. fragilis, when permanent stain were applied, prevailed from 0% to 16.6%; G. duodenalis from 0.8% to 4.3%; E. histolytica/dispar, using a permanent stain or research of antigen, was identified from 0% to 20.6%. Coccidia were very rare, with Cryptosporidium spp observed from 0% to 5.2%. These are our conclusions

A methodology to measure the degre of managerial innovation

OpenAIRE

Ayhan, Mustafa Batuhan; Oztemel, Ercan

2014-01-01

Purpose: The main objective of this study is to introduce the concept of managerial innovation and to propose a quantitative methodology to measure the degree of managerial innovation capability by analyzing the evolution of the techniques used for management functions.Design/methodology/approach: The methodology mainly focuses on the different techniques used for each management functions namely; Planning, Organizing, Leading, Controlling and Coordinating. These functions are studied and the...

Incidence of Postoperative Residual Paralysis in a Nigerian ...

African Journals Online (AJOL)

2018-01-30

Jan 30, 2018 ... Aim: The aim of this study was to determine the incidence of PORP, associated factors related with its occurrence and critical respiratory events in the postanesthesia recovery room (PAR) at our institution. Methodology: Forty‑one adult patients were scheduled for elective surgeries requiring GA with the use ...

Distance learning methodology and technique in scientific and vocational communication (on the example of the master’s distance course in linguistics

Directory of Open Access Journals (Sweden)

S. S. Khromov

2016-01-01

Full Text Available The article is devoted to the elaboration of methodology and technique of the master’s distance course in linguistics for Russian students. The research novelty lies in the fact that the course presents the results methodic and scientific work of the teachers’ and students’ stuff. Within the course framework we plan to transfer the communicative activity concept to the distance forms of education and modeling a new type of the educational product.The purposes of the research are: 1 to develop the distance learning methodology and technique for a linguistic master’s course; 2 to elaborate an internal structure of the project; 3 to demonstrate which vocational, language and speech competencies are to appear as tge result of the project; 4 to describe the algorithm of the full-time lecture course in linguistics in a distance format; 5 to conduct a pedagogical experiment realizing the distance learning education in master’s linguistic course; 6 to prove the innovation and the productivity of the elaborated master’s course in linguistics.The research is based on 1 the paper variant of the full-time lecture course 2 the curriculum of the lecture course 3 the concept of the master’s course in linguistics 4 the concept of the distance course in linguistics 5 students’ interviews 6 virtual tools The research methods are 1 descriptive 2 project 3 comparative 4 statistic methodsConclusion. The novelty and the productivity of the course have been proved and they are manifested in the following 1 in the ability to develop vocational, language and speech competences of the students 2 in developing individual trajectories of the students 3 in expanding sociocultural potential of the students 4 in developing sociocultural potential of the students 5 in intensifying education process. As a result of the experiment we can state that 1 the methodology and technique of distance tools in projecting master’s course in linguistics are described 2 the

Development of a systematic methodology to select hazard analysis techniques for nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Vasconcelos, Vanderley de; Reis, Sergio Carneiro dos; Costa, Antonio Carlos Lopes da [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)]. E-mails: vasconv@cdtn.br; reissc@cdtn.br; aclc@cdtn.br; Jordao, Elizabete [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Quimica]. E-mail: bete@feq.unicamp.br

2008-07-01

In order to comply with licensing requirements of regulatory bodies risk assessments of nuclear facilities should be carried out. In Brazil, such assessments are part of the Safety Analysis Reports, required by CNEN (Brazilian Nuclear Energy Commission), and of the Risk Analysis Studies, required by the competent environmental bodies. A risk assessment generally includes the identification of the hazards and accident sequences that can occur, as well as the estimation of the frequencies and effects of these unwanted events on the plant, people, and environment. The hazard identification and analysis are also particularly important when implementing an Integrated Safety, Health, and Environment Management System following ISO 14001, BS 8800 and OHSAS 18001 standards. Among the myriad of tools that help the process of hazard analysis can be highlighted: CCA (Cause- Consequence Analysis); CL (Checklist Analysis); ETA (Event Tree Analysis); FMEA (Failure Mode and Effects Analysis); FMECA (Failure Mode, Effects and Criticality Analysis); FTA (Fault Tree Analysis); HAZOP (Hazard and Operability Study); HRA (Human Reliability Analysis); Pareto Analysis; PHA (Preliminary Hazard Analysis); RR (Relative Ranking); SR (Safety Review); WI (What-If); and WI/CL (What-If/Checklist Analysis). The choice of a particular technique or a combination of techniques depends on many factors like motivation of the analysis, available data, complexity of the process being analyzed, expertise available on hazard analysis, and initial perception of the involved risks. This paper presents a systematic methodology to select the most suitable set of tools to conduct the hazard analysis, taking into account the mentioned involved factors. Considering that non-reactor nuclear facilities are, to a large extent, chemical processing plants, the developed approach can also be applied to analysis of chemical and petrochemical plants. The selected hazard analysis techniques can support cost

Development of a systematic methodology to select hazard analysis techniques for nuclear facilities

International Nuclear Information System (INIS)

Vasconcelos, Vanderley de; Reis, Sergio Carneiro dos; Costa, Antonio Carlos Lopes da; Jordao, Elizabete

2008-01-01

In order to comply with licensing requirements of regulatory bodies risk assessments of nuclear facilities should be carried out. In Brazil, such assessments are part of the Safety Analysis Reports, required by CNEN (Brazilian Nuclear Energy Commission), and of the Risk Analysis Studies, required by the competent environmental bodies. A risk assessment generally includes the identification of the hazards and accident sequences that can occur, as well as the estimation of the frequencies and effects of these unwanted events on the plant, people, and environment. The hazard identification and analysis are also particularly important when implementing an Integrated Safety, Health, and Environment Management System following ISO 14001, BS 8800 and OHSAS 18001 standards. Among the myriad of tools that help the process of hazard analysis can be highlighted: CCA (Cause- Consequence Analysis); CL (Checklist Analysis); ETA (Event Tree Analysis); FMEA (Failure Mode and Effects Analysis); FMECA (Failure Mode, Effects and Criticality Analysis); FTA (Fault Tree Analysis); HAZOP (Hazard and Operability Study); HRA (Human Reliability Analysis); Pareto Analysis; PHA (Preliminary Hazard Analysis); RR (Relative Ranking); SR (Safety Review); WI (What-If); and WI/CL (What-If/Checklist Analysis). The choice of a particular technique or a combination of techniques depends on many factors like motivation of the analysis, available data, complexity of the process being analyzed, expertise available on hazard analysis, and initial perception of the involved risks. This paper presents a systematic methodology to select the most suitable set of tools to conduct the hazard analysis, taking into account the mentioned involved factors. Considering that non-reactor nuclear facilities are, to a large extent, chemical processing plants, the developed approach can also be applied to analysis of chemical and petrochemical plants. The selected hazard analysis techniques can support cost

PREDICTIVE MODELS FOR SUPPORT OF INCIDENT MANAGEMENT PROCESS IN IT SERVICE MANAGEMENT

Directory of Open Access Journals (Sweden)

Martin SARNOVSKY

2018-03-01

Full Text Available ABSTRACT The work presented in this paper is focused on creating of predictive models that help in the process of incident resolution and implementation of IT infrastructure changes to increase the overall support of IT management. Our main objective was to build the predictive models using machine learning algorithms and CRISP-DM methodology. We used the incident and related changes database obtained from the IT environment of the Rabobank Group company, which contained information about the processing of the incidents during the incident management process. We decided to investigate the dependencies between the incident observation on particular infrastructure component and the actual source of the incident as well as the dependency between the incidents and related changes in the infrastructure. We used Random Forests and Gradient Boosting Machine classifiers in the process of identification of incident source as well as in the prediction of possible impact of the observed incident. Both types of models were tested on testing set and evaluated using defined metrics.

Distribution, incidence and severity of yam (Dioscorea spp

African Journals Online (AJOL)

toualy

2014-01-15

Jan 15, 2014 ... incidence, severity of viral diseases, and viruses associated with the infected plants. Incidence and severity of the viral diseases were estimated based on symptoms. Enzyme-linked immunosorbent assay. (ELISA) and polymerase chain reaction (PCR)-based techniques were used for the detection of Yam.

Evaluation of undergraduate clinical learning experiences in the subject of pediatric dentistry using critical incident technique

Directory of Open Access Journals (Sweden)

S Vyawahare

2013-01-01

Full Text Available Introduction: In pediatric dentistry, the experiences of dental students may help dental educators better prepare graduates to treat the children. Research suggests that student′s perceptions should be considered in any discussion of their education, but there has been no systematic examination of India′s undergraduate dental students learning experiences. Aim: This qualitative investigation aimed to gather and analyze information about experiences in pediatric dentistry from the students′ viewpoint using critical incident technique (CIT. Study Design: The sample group for this investigation came from all 240 3 rd and 4 th year dental students from all the four dental colleges in Indore. Using CIT, participants were asked to describe at least one positive and one negative experience in detail. Results: They described 308 positive and 359 negative experiences related to the pediatric dentistry clinic. Analysis of the data resulted in the identification of four key factors related to their experiences: 1 The instructor; 2 the patient; 3 the learning process; and 4 the learning environment. Conclusion: The CIT is a useful data collection and analysis technique that provides rich, useful data and has many potential uses in dental education.

The equivalent incidence angle for porous absorbers backed by a hard surface

DEFF Research Database (Denmark)

Jeong, Cheol-Ho; Brunskog, Jonas

2013-01-01

experiment using a free-field absorption measurement technique with a source at the equivalent angle. This study investigates the equivalent angle for locally and extendedly reacting porous media mainly by a numerical approach: Numerical minimizations of a cost function that is the difference between...... coefficients by free-field techniques, a broad incidence angle range can be suggested: 20 hi65 for extended reaction and hi65 for locally reacting porous absorbers, if an average difference of 0.05 is allowed.......An equivalent incidence angle is defined as the incidence angle at which the oblique incidence absorption coefficient best approximates the random incidence absorption coefficient. Once the equivalent angle is known, the random incidence absorption coefficient can be estimated by a single...

Responding to Terrorist Incidents in Your Community: Flammable-Liquid Fire Fighting Techniques for Municipal and Rural Firefighters

Energy Technology Data Exchange (ETDEWEB)

Denise Baclawski

2010-03-08

The University of Nevada, Reno Fire Science Academy (FSA) applied for grant funding to develop and deliver programs for municipal, rural, and volunteer firefighters. The FSA specializes in preparing responders for a variety of emergency events, including flammable liquid fires resulting from accidents, intentional acts, or natural disasters. Live fire training on full scale burnable props is the hallmark of FSA training, allowing responders to practice critical skills in a realistic, yet safe environment. Unfortunately, flammable liquid live fire training is often not accessible to municipal, rural, or volunteer firefighters due to limited department training budgets, even though most department personnel will be exposed to flammable liquid fire incidents during the course of their careers. In response to this training need, the FSA developed a course during the first year of the grant (Year One), Responding to Terrorist Incidents in Your Community: Flammable-Liquid Fire Fighting Techniques for Municipal and Rural Firefighters. During the three years of the grant, a total of 2,029 emergency responders received this training. In Year Three, two new courses, a train-the-trainer for Responding to Terrorist Incidents in Your Community and Management of Large-Scale Disasters for Public Officials were developed and pilot tested during the Real-World Disaster Management Conference held at the FSA in June of 2007. Two research projects were conducted during Years Two and Three. The first, conducted over a two year period, evaluated student surveys regarding the value of the flammable liquids training received. The second was a needs assessment conducted for rural Nevada. Both projects provided important feedback and a basis for curricula development and improvements.

Methodological aspects and development of techniques for neutron activation analysis of microcomponents in materials of geologic origin

International Nuclear Information System (INIS)

Cohen, I.M.

1982-01-01

Some aspects of the activation analysis methodology applied to geological samples activated in nuclear reactors were studied, and techniques were developed for the determination of various elements in different types of matrixes, using gamma spectrometry for the measurement of the products. The consideration of the methodological aspects includes the study of the working conditions, the preparation of samples and standards, irradiations, treatment of the irradiated material, radiochemical separation and measurement. Experiments were carried out on reproducibility and errors in relation to the behaviour of the measurement equipment and that of the methods of area calculation (total area, Covell and Wasson), as well as on the effects of geometry variations on the results of the measurements, the RA-3 reactors's flux variations, and the homogeneity of the samples and standards. Also studied were: the selection of the conditions of determination, including the irradiation and decay times; the irradiation with thermal and epithermal neutrons; the measurement with the use of absorbers, and the resolution of complex peaks. Both non-destructive and radiochemical separation techniques were developed for the analysis of 5 types of geological materials. These methods were applied to the following determinations: a) In, Cd, Mn, Ga and Co in blende; b) La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu in fluorites; c) La, Ca, Eu, Tb, Yb, Se and Th in barites and celestites; d) Cu and Zn in soils. The spectral interferences or those due to nuclear reactions were studied and evaluated by mathematical calculation. (M.E.L.) [es

The Critical Incident Interview and Ethnoracial Identity.

Science.gov (United States)

Montalvo, Frank F.

1999-01-01

Describes the critical-incident interview, a cross-cultural training technique that helps social work students assess clients' ethnic- and racial-identity development. Uses examples from student interviews to present the steps involved in teaching the technique. Includes guidelines for selecting and interviewing informants, and gives three scales…

Measurements of diamond-turned copper mirrors at glancing incidence

International Nuclear Information System (INIS)

Kimura, W.D.; Saito, T.T.

1987-01-01

The results of glancing incidence absorptance measurements performed on diamond-turned copper mirrors are presented. A photoacoustic calorimetry technique is used in which the output from a low power, chopped cw Nd:YAG laser (1.06 μm) is incident upon the mirror at angles of incidence from 0 to 87 0 , for both s and p-polarizations. Measurements are obtained as a function of the diamond turning groove orientation with respect to the plane of incidence. Minimum absorptance, at high angles of incidence, is achieved with s-polarized light and with the grooves aligned parallel to the plane of incidence. The affects on the absorptance of a large scratch at glancing incidence are also described

Measurements of diamond turned copper mirrors at glancing incidence

International Nuclear Information System (INIS)

Kimura, W.D.; Saito, T.T.

1987-01-01

The results of glancing incidence absorptance measurements performed on diamond turned copper mirrors are presented. A photoacoustic calorimetry technique is used in which the output from a low power, chopped cw Nd:YAG laser (1.06 μm) is incident upon the mirror at angles of incidence from 0 to 87 0 , for both s and p-polarizations. Measurements are obtained as a function of the diamond turning groove orientation with respect to the plane of incidence. Minimum absorptance at high angles of incidence is achieved with s-polarized light and with the grooves aligned parallel to the plane of incidence. The effects on the absorptance of a large scratch at glancing incidence are also described

A methodology to measure the degre of managerial innovation

Directory of Open Access Journals (Sweden)

Mustafa Batuhan Ayhan

2014-01-01

Full Text Available Purpose: The main objective of this study is to introduce the concept of managerial innovation and to propose a quantitative methodology to measure the degree of managerial innovation capability by analyzing the evolution of the techniques used for management functions.Design/methodology/approach: The methodology mainly focuses on the different techniques used for each management functions namely; Planning, Organizing, Leading, Controlling and Coordinating. These functions are studied and the different techniques used for them are listed. Since the techniques used for these management functions evolve in time due to technological and social changes, a methodology is required to measure the degree of managerial innovation capability. This competency is measured through an analysis performed to point out which techniques used for each of these functions.Findings: To check the validity and applicability of this methodology, it is implemented to a manufacturing company. Depending on the results of the implementation, enhancements are suggested to the company for each function to survive in the changing managerial conditionsResearch limitations/implications: The primary limitation of this study is the implementation area. Although the study is implemented in just a single manufacturing company, it is welcomed to apply the same methodology to measure the managerial innovation capabilities of other manufacturing companies. Moreover, the model is ready to be adapted to different sectors although it is mainly prepared for manufacturing sector.Originality/value: Although innovation management is widely studied, managerial innovation is a new concept and introduced to measure the capability to challenge the changes occur in managerial functions. As a brief this methodology aims to be a pioneer in the field of managerial innovation regarding the evolution of management functions. Therefore it is expected to lead more studies to inspect the progress of

Breast Cancer-Related Arm Lymphedema: Incidence Rates, Diagnostic Techniques, Optimal Management and Risk Reduction Strategies

Energy Technology Data Exchange (ETDEWEB)

Shah, Chirag [Department of Radiation Oncology, William Beaumont Hospital, Royal Oak, MI (United States); Vicini, Frank A., E-mail: fvicini@beaumont.edu [Department of Radiation Oncology, William Beaumont Hospital, Royal Oak, MI (United States)

2011-11-15

As more women survive breast cancer, long-term toxicities affecting their quality of life, such as lymphedema (LE) of the arm, gain importance. Although numerous studies have attempted to determine incidence rates, identify optimal diagnostic tests, enumerate efficacious treatment strategies and outline risk reduction guidelines for breast cancer-related lymphedema (BCRL), few groups have consistently agreed on any of these issues. As a result, standardized recommendations are still lacking. This review will summarize the latest data addressing all of these concerns in order to provide patients and health care providers with optimal, contemporary recommendations. Published incidence rates for BCRL vary substantially with a range of 2-65% based on surgical technique, axillary sampling method, radiation therapy fields treated, and the use of chemotherapy. Newer clinical assessment tools can potentially identify BCRL in patients with subclinical disease with prospective data suggesting that early diagnosis and management with noninvasive therapy can lead to excellent outcomes. Multiple therapies exist with treatments defined by the severity of BCRL present. Currently, the standard of care for BCRL in patients with significant LE is complex decongestive physiotherapy (CDP). Contemporary data also suggest that a multidisciplinary approach to the management of BCRL should begin prior to definitive treatment for breast cancer employing patient-specific surgical, radiation therapy, and chemotherapy paradigms that limit risks. Further, prospective clinical assessments before and after treatment should be employed to diagnose subclinical disease. In those patients who require aggressive locoregional management, prophylactic therapies and the use of CDP can help reduce the long-term sequelae of BCRL.

Breast Cancer-Related Arm Lymphedema: Incidence Rates, Diagnostic Techniques, Optimal Management and Risk Reduction Strategies

International Nuclear Information System (INIS)

Shah, Chirag; Vicini, Frank A.

2011-01-01

As more women survive breast cancer, long-term toxicities affecting their quality of life, such as lymphedema (LE) of the arm, gain importance. Although numerous studies have attempted to determine incidence rates, identify optimal diagnostic tests, enumerate efficacious treatment strategies and outline risk reduction guidelines for breast cancer–related lymphedema (BCRL), few groups have consistently agreed on any of these issues. As a result, standardized recommendations are still lacking. This review will summarize the latest data addressing all of these concerns in order to provide patients and health care providers with optimal, contemporary recommendations. Published incidence rates for BCRL vary substantially with a range of 2–65% based on surgical technique, axillary sampling method, radiation therapy fields treated, and the use of chemotherapy. Newer clinical assessment tools can potentially identify BCRL in patients with subclinical disease with prospective data suggesting that early diagnosis and management with noninvasive therapy can lead to excellent outcomes. Multiple therapies exist with treatments defined by the severity of BCRL present. Currently, the standard of care for BCRL in patients with significant LE is complex decongestive physiotherapy (CDP). Contemporary data also suggest that a multidisciplinary approach to the management of BCRL should begin prior to definitive treatment for breast cancer employing patient-specific surgical, radiation therapy, and chemotherapy paradigms that limit risks. Further, prospective clinical assessments before and after treatment should be employed to diagnose subclinical disease. In those patients who require aggressive locoregional management, prophylactic therapies and the use of CDP can help reduce the long-term sequelae of BCRL.

Economically motivated adulteration (EMA) of food: common characteristics of EMA incidents.

Science.gov (United States)

Everstine, Karen; Spink, John; Kennedy, Shaun

2013-04-01

Economically motivated adulteration (EMA) of food, also known as food fraud, is the intentional adulteration of food for financial advantage. A common form of EMA, undeclared substitution with alternative ingredients, is usually a health concern because of allergen labeling requirements. As demonstrated by the nearly 300,000 illnesses in China from melamine adulteration of infant formula, EMA also has the potential to result in serious public health consequences. Furthermore, EMA incidents reveal gaps in quality assurance testing methodologies that could be exploited for intentional harm. In contrast to foodborne disease outbreaks, EMA incidents present a particular challenge to the food industry and regulators because they are deliberate acts that are intended to evade detection. Large-scale EMA incidents have been described in the scientific literature, but smaller incidents have been documented only in media sources. We reviewed journal articles and media reports of EMA since 1980. We identified 137 unique incidents in 11 food categories: fish and seafood (24 incidents), dairy products (15), fruit juices (12), oils and fats (12), grain products (11), honey and other natural sweeteners (10), spices and extracts (8), wine and other alcoholic beverages (7), infant formula (5), plant-based proteins (5), and other food products (28). We identified common characteristics among the incidents that may help us better evaluate and reduce the risk of EMA. These characteristics reflect the ways in which existing regulatory systems or testing methodologies were inadequate for detecting EMA and how novel detection methods and other deterrence strategies can be deployed. Prevention and detection of EMA cannot depend on traditional food safety strategies. Comprehensive food protection, as outlined by the Food Safety Modernization Act, will require innovative methods for detecting EMA and for targeting crucial resources toward the riskiest food products.

Patients' experiences and actions when describing pain after surgery--a critical incident technique analysis.

Science.gov (United States)

Eriksson, Kerstin; Wikström, Lotta; Fridlund, Bengt; Årestedt, Kristofer; Broström, Anders

2016-04-01

Postoperative pain assessment remains a significant problem in clinical care despite patients wanting to describe their pain and be treated as unique individuals. Deeper knowledge about variations in patients' experiences and actions could help healthcare professionals to improve pain management and could increase patients' participation in pain assessments. The aim of this study was, through an examination of critical incidents, to describe patients' experiences and actions when needing to describe pain after surgery. An explorative design involving the critical incident technique was used. Patients from one university and three county hospitals in both urban and rural areas were included. To ensure variation of patients a strategic sampling was made according to age, gender, education and surgery. A total of 25 patients who had undergone orthopaedic or general surgery was asked to participate in an interview, of whom three declined. Pain experiences were described according to two main areas: "Patients' resources when in need of pain assessment" and "Ward resources for performing pain assessments". Patients were affected by their expectations and tolerance for pain. Ability to describe pain could be limited by a fear of coming into conflict with healthcare professionals or being perceived as whining. Furthermore, attitudes from healthcare professionals and their lack of adherence to procedures affected patients' ability to describe pain. Two main areas regarding actions emerged: "Patients used active strategies when needing to describe pain" and "Patients used passive strategies when needing to describe pain". Patients informed healthcare professionals about their pain and asked questions in order to make decisions about their pain situation. Selfcare was performed by distraction and avoiding pain or treating pain by themselves, while others were passive and endured pain or refrained from contact with healthcare professionals due to healthcare professionals

Soft Systems Methodology

Science.gov (United States)

Checkland, Peter; Poulter, John

Soft systems methodology (SSM) is an approach for tackling problematical, messy situations of all kinds. It is an action-oriented process of inquiry into problematic situations in which users learn their way from finding out about the situation, to taking action to improve it. The learning emerges via an organised process in which the situation is explored using a set of models of purposeful action (each built to encapsulate a single worldview) as intellectual devices, or tools, to inform and structure discussion about a situation and how it might be improved. This paper, written by the original developer Peter Checkland and practitioner John Poulter, gives a clear and concise account of the approach that covers SSM's specific techniques, the learning cycle process of the methodology and the craft skills which practitioners develop. This concise but theoretically robust account nevertheless includes the fundamental concepts, techniques, core tenets described through a wide range of settings.

GENESIS OF METHODOLOGY OF MANAGEMENT BY DEVELOPMENT OF ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Z.N. Varlamova

2007-06-01

Full Text Available In clause the genesis of methodology of management of development of organizations as sets of the used methodological approaches and methods is investigated. The results of the comparative analysis of the methodological approaches to management of organizational development are submitted. The traditional methodological approaches are complemented strategic experiment and methodology case studies. The approaches to formation of new methodology and technique of research of sources of competitive advantages of organization are considered.

A comparison of results of empirical studies of supplementary search techniques and recommendations in review methodology handbooks: a methodological review.

Science.gov (United States)

Cooper, Chris; Booth, Andrew; Britten, Nicky; Garside, Ruth

2017-11-28

The purpose and contribution of supplementary search methods in systematic reviews is increasingly acknowledged. Numerous studies have demonstrated their potential in identifying studies or study data that would have been missed by bibliographic database searching alone. What is less certain is how supplementary search methods actually work, how they are applied, and the consequent advantages, disadvantages and resource implications of each search method. The aim of this study is to compare current practice in using supplementary search methods with methodological guidance. Four methodological handbooks in informing systematic review practice in the UK were read and audited to establish current methodological guidance. Studies evaluating the use of supplementary search methods were identified by searching five bibliographic databases. Studies were included if they (1) reported practical application of a supplementary search method (descriptive) or (2) examined the utility of a supplementary search method (analytical) or (3) identified/explored factors that impact on the utility of a supplementary method, when applied in practice. Thirty-five studies were included in this review in addition to the four methodological handbooks. Studies were published between 1989 and 2016, and dates of publication of the handbooks ranged from 1994 to 2014. Five supplementary search methods were reviewed: contacting study authors, citation chasing, handsearching, searching trial registers and web searching. There is reasonable consistency between recommended best practice (handbooks) and current practice (methodological studies) as it relates to the application of supplementary search methods. The methodological studies provide useful information on the effectiveness of the supplementary search methods, often seeking to evaluate aspects of the method to improve effectiveness or efficiency. In this way, the studies advance the understanding of the supplementary search methods. Further

Methodology for Calculating Latency of GPS Probe Data

Energy Technology Data Exchange (ETDEWEB)

Young, Stanley E [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wang, Zhongxiang [University of Maryland; Hamedi, Masoud [University of Maryland

2017-10-01

Crowdsourced GPS probe data, such as travel time on changeable-message signs and incident detection, have been gaining popularity in recent years as a source for real-time traffic information to driver operations and transportation systems management and operations. Efforts have been made to evaluate the quality of such data from different perspectives. Although such crowdsourced data are already in widespread use in many states, particularly the high traffic areas on the Eastern seaboard, concerns about latency - the time between traffic being perturbed as a result of an incident and reflection of the disturbance in the outsourced data feed - have escalated in importance. Latency is critical for the accuracy of real-time operations, emergency response, and traveler information systems. This paper offers a methodology for measuring probe data latency regarding a selected reference source. Although Bluetooth reidentification data are used as the reference source, the methodology can be applied to any other ground truth data source of choice. The core of the methodology is an algorithm for maximum pattern matching that works with three fitness objectives. To test the methodology, sample field reference data were collected on multiple freeway segments for a 2-week period by using portable Bluetooth sensors as ground truth. Equivalent GPS probe data were obtained from a private vendor, and their latency was evaluated. Latency at different times of the day, impact of road segmentation scheme on latency, and sensitivity of the latency to both speed-slowdown and recovery-from-slowdown episodes are also discussed.

Revolutionary introduction of RIA/IRMA methodology in medical diagnostics: a study employing the technique for hyperprolactinemia and its correlation with hypothyroidism

International Nuclear Information System (INIS)

Tasneem, A.

2011-01-01

The aim of the study was to determine the incidence of hyperprolactinemia, its underlying causes and consequences, and to study its correlation with hypothyroidism. The study was carried out on 1365 male and female subjects referred to Centre for Nuclear Medicine Lahore for hormonal estimation. Serum Prolactin and thyroid stimulating hormone (TSH) levels were measured using IRMA kits. Prevalence of hyperprolactinemia turned out to be 4.90%. Menstrual irregularity appeared as a major consequence. The incidence rate was the highest in the age range of 21-27 years. Hypothyroidism in hyperprolactinemic subjects was observed to be 22.7%. i) Immunoradiometric assay is a micro analytical technique which can measure very minute amount of the antigens in the serum. II) Prevalence of hypothyroidism in hyperprolactinemic subjects in our population is promising enough to estimate thyroid hormone levels in hyperprolactinemic patients. (author)

Joint application of AI techniques, PRA and disturbance analysis methodology to problems in the maintenance and design of nuclear power plants. Final report

Energy Technology Data Exchange (ETDEWEB)

Okrent, D.

1989-03-01

This final report summarizes the accomplishments of a two year research project entitled ``Joint Application of Artificial Intelligence Techniques, Probabilistic Risk Analysis, and Disturbance Analysis Methodology to Problems in the Maintenance and Design of Nuclear Power Plants. The objective of this project is to develop and apply appropriate combinations of techniques from artificial intelligence, (AI), reliability and risk analysis and disturbance analysis to well-defined programmatic problems of nuclear power plants. Reactor operations issues were added to those of design and maintenance as the project progressed.

Towards the Development of a Defensive Cyber Damage and Mission Impact Methodology

National Research Council Canada - National Science Library

Fortson, Jr, Larry W

2007-01-01

The purpose of this research is to establish a conceptual methodological framework that will facilitate effective cyber damage and mission impact assessment and reporting following a cyber-based information incidents...

The NLstart2run study: Incidence and risk factors of running-related injuries in novice runners

NARCIS (Netherlands)

Kluitenberg, B.; van Middelkoop, M.; Smits, D.W.; Verhagen, E.A.L.M.; Hartgens, F.; Diercks, R.; van der Worp, H.

2015-01-01

Running is a popular form of physical activity, despite of the high incidence of running-related injuries (RRIs). Because of methodological issues, the etiology of RRIs remains unclear. Therefore, the purposes of the study were to assess the incidence of RRIs and to identify risk factors for RRIs in

The NLstart2run study : Incidence and risk factors of running-related injuries in novice runners

NARCIS (Netherlands)

Kluitenberg, B; van Middelkoop, M; Smits, D W; Verhagen, E; Hartgens, F; Diercks, R; van der Worp, H

2015-01-01

Running is a popular form of physical activity, despite of the high incidence of running-related injuries (RRIs). Because of methodological issues, the etiology of RRIs remains unclear. Therefore, the purposes of the study were to assess the incidence of RRIs and to identify risk factors for RRIs in

Critical incident monitoring in anaesthesia.

Science.gov (United States)

Choy, Y C

2006-12-01

Critical incident monitoring in anaesthesia is an important tool for quality improvement and maintenance of high safety standards in anaesthetic services. It is now widely accepted as a useful quality improvement technique for reducing morbidity and mortality in anaesthesia and has become part of the many quality assurance programmes of many general hospitals under the Ministry of Health. Despite wide-spread reservations about its value, critical incident monitoring is a classical qualitative research technique which is particularly useful where problems are complex, contextual and influenced by the interaction of physical, psychological and social factors. Thus, it is well suited to be used in probing the complex factors behind human error and system failure. Human error has significant contributions to morbidities and mortalities in anaesthesia. Understanding the relationships between, errors, incidents and accidents is important for prevention and risk management to reduce harm to patients. Cardiac arrests in the operating theatre (OT) and prolonged stay in recovery, constituted the bulk of reported incidents. Cardiac arrests in OT resulted in significant mortality and involved mostly de-compensated patients and those with unstable cardiovascular functions, presenting for emergency operations. Prolonged-stay in the recovery extended period of observation for ill patients. Prolonged stay in recovery was justifiable in some cases, as these patients needed a longer period of post-operative observation until they were stable enough to return to the ward. The advantages of the relatively low cost, and the ability to provide a comprehensive body of detailed qualitative information, which can be used to develop strategies to prevent and manage existing problems and to plan further initiatives for patient safety makes critical incident monitoring a valuable tool in ensuring patient safety. The contribution of critical incident reporting to the issue of patient safety is

Congestive heart failure, spouses' support and the couple's sleep situation: a critical incident technique analysis.

Science.gov (United States)

Broström, Anders; Strömberg, Anna; Dahlström, Ulf; Fridlund, Bengt

2003-03-01

Sleep related breathing disorders are common as well as a poor prognostic sign associated with higher mortality in patients with congestive heart failure (CHF). These patients often have a shorter total duration of sleep, disturbed sleep structure and increased daytime sleepiness, which can negatively affect all dimensions of the life situation. The spouse has an important role in supporting the patient in relation to sleep disorders, but this role may be adversely affected by the sleep situation of the couple. The aim of this study was to describe decisive situations that influence spouses' support to patients with CHF in relation to the couple's sleep situation. A qualitative descriptive design using critical incident technique was employed. Incidents were collected by means of interviews with 25 spouses of patients with CHF, strategically selected from two hospital-based specialist clinics in southern Sweden. Two main areas emerged in the analysis: support stimulating situations and support inhibiting situations. Support stimulating situations described how spouses' support was positively affected by their own adaptation in psychosocial or practical situations, and receiving help from others. Support inhibiting situations described how the spouses' support was negatively affected by sleep disturbances as a result of the patient's symptoms, anxiety in relation to the disease, limitations as a result of the sleeping habits, dissatisfaction with care related to the sleep situation, and being left to cope alone with the problems. An increased understanding of the stimulating and inhibiting situations influencing spouses' support for patients with CHF can guide health care personnel in deciding if an intervention is needed to improve the sleep situation for patient and spouse.

A fractal analysis of skin pigmented lesions using the novel tool of the variogram technique

Energy Technology Data Exchange (ETDEWEB)

Mastrolonardo, Mario [Department of Medical and Occupational Sciences, Unit of Dermatology, Azienda Ospedaliero-Universitaria ' Ospedali Riuniti' di Foggia (Italy)]. E-mail: mariomastrolonardo@libero.it; Conte, Elio [Department of Medical and Occupational Sciences, Unit of Dermatology, Azienda Ospedaliero-Universitaria ' Ospedali Riuniti' di Foggia (Italy); Department of Pharmacology and Human Physiology, TIRES-Center for Innovative Technology for Signal Detection and Processing, Bari University, 70100 Bari (Italy); Zbilut, Joseph P. [Department of Molecular Biophysics and Physiology, Rush University, Chicago, IL 60612 (United States)

2006-06-15

The incidence of the cutaneous malignant melanoma is increasing rapidly in the world [Ferlay J, Bray F, Pisani P, et al. GLOBOCAN 2000: Cancer incidence, mortality and prevalence worldwide, Version 1.0 IARC Cancer Base no. 5. Lyon: IARC Press, 2001]. The therapeutic address requires a method having high sensitivity and capability to diagnose such disease at an early stage. We introduce a new diagnostic method based on non-linear methodologies. In detail we suggest that fractal as well as noise and chaos dynamics are the most important components responsible for genetic instability of melanocytes. As consequence we introduce the new technique of the variogram and of fractal analysis extended to the whole regions of interest of skin in order to obtain parameters able to identify the malignant lesion. In a preliminary analysis, satisfactory results are reached.

Proposal of methodology of tsunami accident sequence analysis induced by earthquake using DQFM methodology

International Nuclear Information System (INIS)

Muta, Hitoshi; Muramatsu, Ken

2017-01-01

Since the Fukushima-Daiichi nuclear power station accident, the Japanese regulatory body has improved and upgraded the regulation of nuclear power plants, and continuous effort is required to enhance risk management in the mid- to long term. Earthquakes and tsunamis are considered as the most important risks, and the establishment of probabilistic risk assessment (PRA) methodologies for these events is a major issue of current PRA. The Nuclear Regulation Authority (NRA) addressed the PRA methodology for tsunamis induced by earthquakes, which is one of the methodologies that should be enhanced step by step for the improvement and maturity of PRA techniques. The AESJ standard for the procedure of seismic PRA for nuclear power plants in 2015 provides the basic concept of the methodology; however, details of the application to the actual plant PRA model have not been sufficiently provided. This study proposes a detailed PRA methodology for tsunamis induced by earthquakes using the DQFM methodology, which contributes to improving the safety of nuclear power plants. Furthermore, this study also states the issues which need more research. (author)

Ethical Dilemmas of Turkish Counsellors: A Critical Incidents Study

Science.gov (United States)

Sivis-Cetinkaya, Rahsan

2015-01-01

Ethical dilemmas from a national purposive sample of Turkish counsellors (N = 172) were collected using critical incidents technique. Content analysis was performed with open coding guided by the classification of American Counseling Association code of ethics. Incidents regarding confidentiality and privacy (56.4%), with 37.1% involving incidents…

Pursuit of new methodology on risk communication - Research assistance program by open application

International Nuclear Information System (INIS)

Konoa, N.; Takeshima, K.

2004-01-01

In the latter half of 1990s a series of incidents occurred in Japan such as MOX fuel inspection data falsification, Monju fast breeder reactor sodium leakage accident, Tokai nuclear fuel plant (JCO) criticality accident and so on. It is thought that existing measures based on nuclear technology are not well cope with those incidents and another countermeasure utilizing new methodology of cultural and social sciences was keenly felt by both administration agencies and nuclear industries. Above all, the technique such as risk communication to inform the influence of trouble correctly and convincingly to the residents and mass media and to prevent the harm due to rumor is obviously inevitable. Based on these circumstances, Japanese NISA (The Nuclear and Industrial Safety Agency) initiated in 2002FY new project by open application in the field of cultural and social sciences, and risk communication was one of the principal subject of study. Up to now, 6 risk communication studies are currently in progress. The project was taken over from NISA to JNES (Incorporated Administrative Agency Japan Nuclear Energy Safety Organization) since 2004FY. This paper shows the overall structure of the project and the outline of the running studies. (author)

Defining Incident Management Processes for CSIRTs: A Work in Progress

Science.gov (United States)

2004-10-01

royalty -free government-purpose license to use, duplicate, or disclose the work, in whole or in part and in any manner, and to have or permit others to...Methodology of Incident Handling.” InfoSecurity 2001 Conference Program. Malaysian National Computer Confederation, 2001. 22 CMU/SEI-2004-TR-015

The role of histological techniques for preparation of bone in studies of pl

International Nuclear Information System (INIS)

Alati, T.

1982-01-01

Techniques and methodologies for histological preparation of bone samples from plutonium-contaminated laboratory mice are described in the present report. These techniques have been set up within a research program on Pu-239 toxicity at low and very low activities. Pu-239 is a well-known alpha emitter with high relative biological effectiveness; when incorporated in mammalian organism it is also taken up by bone surfaces where osteosarcomas may be induced. This effect is very probably associated to the particular spatial relationships between the incorporated radionuclide and the target cells at risk. The research program actually in progress includes both the studies of late pathological effects, mainly in terms of bone tumor incidence and rate, and the quantitative description of the spatial relationships mentioned above. Whithin this framework, the techniques to described refer to the preparation of histological samples of demineralized bones for traditional histopathological analyses and of mineralized bones for studies of Pu-239 microdistributions by means of fission track analyses

Practical implementation of a methodology for digital images authentication using forensics techniques

OpenAIRE

Francisco Rodríguez-Santos; Guillermo Delgado-Gutierréz; Leonardo Palacios-Luengas; Rubén Vázquez Medina

2015-01-01

This work presents a forensics analysis methodology implemented to detect modifications in JPEG digital images by analyzing the image’s metadata, thumbnail, camera traces and compression signatures. Best practices related with digital evidence and forensics analysis are considered to determine if the technical attributes and the qualities of an image are consistent with each other. This methodology is defined according to the recommendations of the Good Practice Guide for Computer-Based Elect...

Simulation analysis of route diversion strategies for freeway incident management : final report.

Science.gov (United States)

1995-02-01

The purpose of this project was to investigate whether simulation models could : be used as decision aids for defining traffic diversion strategies for effective : incident management. A methodology was developed for using such a model to : determine...

A methodology for semiautomatic taxonomy of concepts extraction from nuclear scientific documents using text mining techniques

International Nuclear Information System (INIS)

Braga, Fabiane dos Reis

2013-01-01

This thesis presents a text mining method for semi-automatic extraction of taxonomy of concepts, from a textual corpus composed of scientific papers related to nuclear area. The text classification is a natural human practice and a crucial task for work with large repositories. The document clustering technique provides a logical and understandable framework that facilitates the organization, browsing and searching. Most clustering algorithms using the bag of words model to represent the content of a document. This model generates a high dimensionality of the data, ignores the fact that different words can have the same meaning and does not consider the relationship between them, assuming that words are independent of each other. The methodology presents a combination of a model for document representation by concepts with a hierarchical document clustering method using frequency of co-occurrence concepts and a technique for clusters labeling more representatives, with the objective of producing a taxonomy of concepts which may reflect a structure of the knowledge domain. It is hoped that this work will contribute to the conceptual mapping of scientific production of nuclear area and thus support the management of research activities in this area. (author)

Biotechnology-assisted breeding techniques implementation for rice improvement in Uruguay

International Nuclear Information System (INIS)

Blanco, P.; Capdevielle, F.; Avila, S.; Perez, F.; Branda, A.; Castillo, A.; Stoll, M.

2001-01-01

Mutagenic treatment was highly effective in reducing plant height and growth duration in the parent variety EEA-404. Important variation was also observed in grain and leaf pubescence and in grain shape. Several M 4 lines with desirable plant type and grain shape were selected for yield testing. Aggregated sheath spot (ASS) - Rhizoctonia oryzae sativae - disease pressure on M 3 and M 4 lines from INIA Tacuari was not sufficient to allow selection for this character. However, important variability in resistance to the physiological disorder Straighthead was observed among the lines. The regeneration percentage obtained with the methodology of anther culture facilitated application of this technique in a larger number of crosses. Some of the doubled haploid (DH) lines from resistant/susceptible crosses showed good yield potential and milling quality, and low incidence of stem diseases. Sequential Bulked Typing may provide an alternative to individual typing for a large number of markers, improving DNA pooling techniques based on phenotypic evaluations of quantitative traits. (author)

GO methodology. Volume 1. Overview manual

International Nuclear Information System (INIS)

1983-06-01

The GO methodology is a success-oriented probabilistic system performance analysis technique. The methodology can be used to quantify system reliability and availability, identify and rank critical components and the contributors to system failure, construct event trees, and perform statistical uncertainty analysis. Additional capabilities of the method currently under development will enhance its use in evaluating the effects of external events and common cause failures on system performance. This Overview Manual provides a description of the GO Methodology, how it can be used, and benefits of using it in the analysis of complex systems

Methodology of shooting training using modern IT techniques

Science.gov (United States)

Gudzbeler, Grzegorz; Struniawski, Jarosław

2017-08-01

Mastering, improvement, shaping and preservation of skills of safe, efficient and effective use of the firearm requires the use of relevant methodology of conducting the shooting training. However reality of police trainings does not usually allow for intensive training shooting with the use of ammunition. An alternative solution is the use of modern training technologies. Example of this is the "Virtual system of improvement tactics of intervention services responsible for security and shooting training." Introduction of stimulator to police trainings will enable complete stuff preparation to achieve its tasks, creating potential of knowledge and experience in many areas, far exceeding the capabilities of conventional training.

Incidents/accidents classification and reporting in Statoil.

Science.gov (United States)

Berentsen, Rune; Holmboe, Rolf H

2004-07-26

quality for the more serious incidents (5% of the total number of incidents registered) has improved, the improved handling of incidents has contributed to more reliable and accurate HSE indicators at a corporate level, more user friendly codes in place for incident registration (based on MTO methodology), the revised matrix gives distinct criteria with respect to which investigation level to be initiated for a specific incident. All activities related to handling of undesirable incidents have been summarised and illustrated on a two-sided plastic form, incorporating both the categorisation matrix and the activity flowchart (see Figs. 1 and 4).

Using a hybrid methodology of dasyametric mapping and data ...

African Journals Online (AJOL)

Using a hybrid methodology of dasyametric mapping and data interpolation techniques ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... the value and accuracy of the developed methodology is that of the 2011 census ...

Effect of farming practices and farm history on incidence of coconut ...

African Journals Online (AJOL)

Management of coconut (Cocos nucifera) lethal yellowing disease (CLYD), which has killed about eight million coconut trees in Mozambique, has proved challenging. The objective of this study was to investigate the impact of farming practices and related history, on the CLYD incidence in Mozambique. The methodology ...

Evaluation and assessment of nuclear power plant seismic methodology

International Nuclear Information System (INIS)

Bernreuter, D.; Tokarz, F.; Wight, L.; Smith, P.; Wells, J.; Barlow, R.

1977-01-01

The major emphasis of this study is to develop a methodology that can be used to assess the current methods used for assuring the seismic safety of nuclear power plants. The proposed methodology makes use of system-analysis techniques and Monte Carlo schemes. Also, in this study, we evaluate previous assessments of the current seismic-design methodology

Evaluation and assessment of nuclear power plant seismic methodology

Energy Technology Data Exchange (ETDEWEB)

Bernreuter, D.; Tokarz, F.; Wight, L.; Smith, P.; Wells, J.; Barlow, R.

1977-03-01

The major emphasis of this study is to develop a methodology that can be used to assess the current methods used for assuring the seismic safety of nuclear power plants. The proposed methodology makes use of system-analysis techniques and Monte Carlo schemes. Also, in this study, we evaluate previous assessments of the current seismic-design methodology.

Resection methodology for PSP data processing: Recent ...

Indian Academy of Sciences (India)

M. Senthilkumar (Newgen Imaging) 1461 1996 Oct 15 13:05:22

Abstract. PSP data processing, which primarily involves image alignment and image analysis, is a crucial element in obtaining accurate PSP results. There are two broad approaches to image alignment: the algebraic transformation technique, often called image-warping technique, and resection methodology, which uses ...

Comparative study on software development methodologies

OpenAIRE

Mihai Liviu DESPA

2014-01-01

This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager han...

La Técnica del Incidente Crítico y sus implicaciones en el desarrollo de la investigación en enfermería The critical incident technique and its implications in the development of the nursing research

Directory of Open Access Journals (Sweden)

Ana Lucía Noreña Peña

2008-03-01

Full Text Available En este artículo pretende describir, a manera introductoria, la aplicabilidad que tiene la técnica del incidente crítico, como herramienta de investigación cualitativa. A su vez explora el valor que desde sus inicios diversas disciplinas le han atribuido a la técnica para recolectar y analizar datos cualitativos. Su reconocimiento actual está basado en que la técnica permite comprender algunos componentes que pueden estar siendo valorados como "críticos" dentro de una actividad determinada. Se ha considerado que la técnica posee a nivel metodológico propiedades tales como practicidad, flexibilidad, versatilidad y efectividad en su aplicación. En esta breve disertación sobre la técnica, se describen las características generales de la técnica, sus atributos, aplicaciones y los aportes potenciales y reales que su utilización tiene en la investigación científica y el conocimento disciplinar de enfermería.This article describes, in an introductory way, the applicability that the critical incident technique has, as a qualitative research tool. It also explores the value that has been attributed to the technique by diverse disciplines to recollect and analyze qualitative data. Its current acknowledgment is based on the fact that the technique allows to understand some components that can been valued as "critical" among a given activity. It’s been considered that the technique has in the methodological level properties such as practicability, flexibility, versatility, and effectiveness in its application. In this brief dissertation about the technique, it’s described the general characteristics of the technique, its attributes, applications, and the potential and real contributions that its use has in the scientific research and the disciplinary knowledge of nursery.

Error-Based Accidents and Security Incidents in Nuclear Materials Management

International Nuclear Information System (INIS)

Pond, Daniel J.; Greitzer, Frank L.

2005-01-01

Hazard and risk assessments, along with human error analysis and mitigation techniques, have long been mainstays of effective safety programs. These tools have revealed that worker errors contributing to or resulting in accidents are often the consequence of ineffective system conditions, process features, or individual employee characteristics. At Los Alamos National Laboratory (LANL), security, safety, human error, and organizational analysts determined that the system-induced human errors that make accidents more likely also are contributing to security incidents. A similar set of system conditions has been found to underlie deliberate, non-malevolent deviations from proper security practices - termed breaches - that also can result in a security incident. In fiscal-year (FY) 2002, LANL's Security Division therefore established the ESTHER (Enhanced Security Through Human Error Reduction) program to identify and reduce the influence of the factors that underlie employee errors and breaches and, in turn, security incidents. Recognizing the potential benefits of this program and approach, in FY2004 the Department of Energy (DOE) Office of Security Policy (DOE-SO) funded an expansion of ESTHER implementation to the causal assessment and reporting of security incidents at other DOE sites. This presentation will focus on three applications of error/breach assessment and mitigation techniques. One use is proactive, accomplished through the elimination of contributors to error, whereas two are reactive, implemented in response to accidents or security incidents as well as to near misses, to prevent recurrence. The human performance and safety bases of these techniques will be detailed. Associated tools - including computer-based assessment training and web-based incident reporting modules developed by Pacific Northwest National Laboratory - will be discussed

Reflective Methodology: The Beginning Teacher

Science.gov (United States)

Templeton, Ronald K.; Siefert, Thomas E.

1970-01-01

Offers a variety of specific techniques which will help the beginning teacher to implement reflective methodology and create an inquiry-centered classroom atmosphere, at the same time meeting the many more pressing demands of first-year teaching. (JES)

Probabilistic methodology for turbine missile risk analysis

International Nuclear Information System (INIS)

Twisdale, L.A.; Dunn, W.L.; Frank, R.A.

1984-01-01

A methodology has been developed for estimation of the probabilities of turbine-generated missile damage to nuclear power plant structures and systems. Mathematical models of the missile generation, transport, and impact events have been developed and sequenced to form an integrated turbine missile simulation methodology. Probabilistic Monte Carlo techniques are used to estimate the plant impact and damage probabilities. The methodology has been coded in the TURMIS computer code to facilitate numerical analysis and plant-specific turbine missile probability assessments. Sensitivity analyses have been performed on both the individual models and the integrated methodology, and probabilities have been estimated for a hypothetical nuclear power plant case study. (orig.)

Comparative study on software development methodologies

Directory of Open Access Journals (Sweden)

Mihai Liviu DESPA

2014-12-01

Full Text Available This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager handles challenges and risks that are predominantly encountered in business and research areas that involve state of the art technology. Conventional software development stages are defined and briefly described. Development stages are the building blocks of any software development methodology so it is important to properly research this aspect. Current software development methodologies are presented. Development stages are defined for every showcased methodology. For each methodology a graphic representation is illustrated in order to better individualize its structure. Software development methodologies are compared by highlighting strengths and weaknesses from the stakeholder's point of view. Conclusions are formulated and a research direction aimed at formalizing a software development methodology dedicated to innovation orientated IT projects is enunciated.

Robust Optimization in Simulation : Taguchi and Response Surface Methodology

NARCIS (Netherlands)

Dellino, G.; Kleijnen, J.P.C.; Meloni, C.

2008-01-01

Optimization of simulated systems is tackled by many methods, but most methods assume known environments. This article, however, develops a 'robust' methodology for uncertain environments. This methodology uses Taguchi's view of the uncertain world, but replaces his statistical techniques by

Selecting a software development methodology. [of digital flight control systems

Science.gov (United States)

Jones, R. E.

1981-01-01

The state of the art analytical techniques for the development and verification of digital flight control software is studied and a practical designer oriented development and verification methodology is produced. The effectiveness of the analytic techniques chosen for the development and verification methodology are assessed both technically and financially. Technical assessments analyze the error preventing and detecting capabilities of the chosen technique in all of the pertinent software development phases. Financial assessments describe the cost impact of using the techniques, specifically, the cost of implementing and applying the techniques as well as the relizable cost savings. Both the technical and financial assessment are quantitative where possible. In the case of techniques which cannot be quantitatively assessed, qualitative judgements are expressed about the effectiveness and cost of the techniques. The reasons why quantitative assessments are not possible will be documented.

Sequelae of Endoscopic Inguinal Hernia Repair : Incidence, evaluation and management

NARCIS (Netherlands)

Burgmans, J.P.J.

2015-01-01

The endoscopic preperitoneal technique (TEP) is an appealing inguinal hernia repair technique, theoretically superior to other approaches. In practice some problems remain unsolved. Real incidences of chronic postoperative inguinal pain (CPIP) and other important sequelae of endoscopic hernia repair

Diabetes incidence and projections from prevalence surveys in Fiji.

Science.gov (United States)

Morrell, Stephen; Lin, Sophia; Tukana, Isimeli; Linhart, Christine; Taylor, Richard; Vatucawaqa, Penina; Magliano, Dianna J; Zimmet, Paul

2016-11-25

Type 2 diabetes mellitus (T2DM) incidence is traditionally derived from cohort studies that are not always feasible, representative, or available. The present study estimates T2DM incidence in Fijian adults from T2DM prevalence estimates assembled from surveys of 25-64 year old adults conducted over 30 years (n = 14,288). T2DM prevalence by five-year age group from five population-based risk factor surveys conducted over 1980-2011 were variously adjusted for urban-rural residency, ethnicity, and sex to previous censuses (1976, 1986, 1996, 2009) to improve representativeness. Prevalence estimates were then used to calculate T2DM incidence based on birth cohorts from the age-period (Lexis) matrix following the Styblo technique, first used to estimate annual risk of tuberculosis infection (incidence) from sequential Mantoux population surveys. Poisson regression of year, age, sex, and ethnicity strata (n = 160) was used to develop projections of T2DM prevalence and incidence to 2020 based on various scenarios of population weight measured by body mass index (BMI) change. T2DM prevalence and annual incidence increased in Fiji over 1980-2011. Prevalence was higher in Indians and men than i-Taukei and women. Incidence was higher in Indians and women. From regression analyses, absolute reductions of 2.6 to 5.1% in T2DM prevalence (13-26% lower), and 0.5-0.9 per 1000 person-years in incidence (8-14% lower), could be expected in 2020 in adults if mean population weight could be reduced by 1-4 kg, compared to the current period trend in weight gain. This is the first application of the Styblo technique to calculate T2DM incidence from population-based prevalence surveys over time. Reductions in population BMI are predicted to reduce T2DM incidence and prevalence in Fiji among adults aged 25-64 years.

Incident factors in facility location: An application in the Colombian biofuel sector

Directory of Open Access Journals (Sweden)

Alexandra Eugenia Duarte

2013-09-01

Full Text Available Facility location concerns high impact strategic decision-making in supply chain design. One of the most important issues regarding such decision is a suitable selection of incident factors due to their effects on costs and customer service level. This paper was thus aimed at presenting a methodology for defining and hierarchising a group of factors which affect decision-making concerning facility location. The methodology was based on expert methods, incorporating a goal programming application extended to support weighting. Colombian biofuels sector results are presented.

Evaluation of safeguards procedures: a summary of a methodology

International Nuclear Information System (INIS)

Salisbury, J.D.; Savage, J.W.

1979-01-01

A methodology for the evaluation of safeguards procedures is described. As presently conceptualized, the methodology will consist of the following steps: (1) expansion of the general protection requirements that are contained in the NRC regulations into more detailed but still generic requirements for use at the working level; (2) development of techniques and formats for using the working-level requirements in an evaluation; (3) development of a technique for converting specific facility protection procedures into a format that will allow comparison with the working-level requirements; (4) development of an evaluation technique for comparing the facility protection procedures to determine if they meet the protection requirements

WE-B-BRC-02: Risk Analysis and Incident Learning

International Nuclear Information System (INIS)

Fraass, B.

2016-01-01

Prospective quality management techniques, long used by engineering and industry, have become a growing aspect of efforts to improve quality management and safety in healthcare. These techniques are of particular interest to medical physics as scope and complexity of clinical practice continue to grow, thus making the prescriptive methods we have used harder to apply and potentially less effective for our interconnected and highly complex healthcare enterprise, especially in imaging and radiation oncology. An essential part of most prospective methods is the need to assess the various risks associated with problems, failures, errors, and design flaws in our systems. We therefore begin with an overview of risk assessment methodologies used in healthcare and industry and discuss their strengths and weaknesses. The rationale for use of process mapping, failure modes and effects analysis (FMEA) and fault tree analysis (FTA) by TG-100 will be described, as well as suggestions for the way forward. This is followed by discussion of radiation oncology specific risk assessment strategies and issues, including the TG-100 effort to evaluate IMRT and other ways to think about risk in the context of radiotherapy. Incident learning systems, local as well as the ASTRO/AAPM ROILS system, can also be useful in the risk assessment process. Finally, risk in the context of medical imaging will be discussed. Radiation (and other) safety considerations, as well as lack of quality and certainty all contribute to the potential risks associated with suboptimal imaging. The goal of this session is to summarize a wide variety of risk analysis methods and issues to give the medical physicist access to tools which can better define risks (and their importance) which we work to mitigate with both prescriptive and prospective risk-based quality management methods. Learning Objectives: Description of risk assessment methodologies used in healthcare and industry Discussion of radiation oncology

WE-B-BRC-02: Risk Analysis and Incident Learning

Energy Technology Data Exchange (ETDEWEB)

Fraass, B. [Cedars Sinai Medical Center (United States)

2016-06-15

Prospective quality management techniques, long used by engineering and industry, have become a growing aspect of efforts to improve quality management and safety in healthcare. These techniques are of particular interest to medical physics as scope and complexity of clinical practice continue to grow, thus making the prescriptive methods we have used harder to apply and potentially less effective for our interconnected and highly complex healthcare enterprise, especially in imaging and radiation oncology. An essential part of most prospective methods is the need to assess the various risks associated with problems, failures, errors, and design flaws in our systems. We therefore begin with an overview of risk assessment methodologies used in healthcare and industry and discuss their strengths and weaknesses. The rationale for use of process mapping, failure modes and effects analysis (FMEA) and fault tree analysis (FTA) by TG-100 will be described, as well as suggestions for the way forward. This is followed by discussion of radiation oncology specific risk assessment strategies and issues, including the TG-100 effort to evaluate IMRT and other ways to think about risk in the context of radiotherapy. Incident learning systems, local as well as the ASTRO/AAPM ROILS system, can also be useful in the risk assessment process. Finally, risk in the context of medical imaging will be discussed. Radiation (and other) safety considerations, as well as lack of quality and certainty all contribute to the potential risks associated with suboptimal imaging. The goal of this session is to summarize a wide variety of risk analysis methods and issues to give the medical physicist access to tools which can better define risks (and their importance) which we work to mitigate with both prescriptive and prospective risk-based quality management methods. Learning Objectives: Description of risk assessment methodologies used in healthcare and industry Discussion of radiation oncology

Risk Insights Gained from Fire Incidents

International Nuclear Information System (INIS)

Kazarians, Mardy; Nowlen, Steven P.

1999-01-01

There now exist close to 20 years of history in the application of Probabilistic Risk Assessment (PRA) for the analysis of fire risk at nuclear power plants. The current methods are based on various assumptions regarding fire phenomena, the impact of fire on equipment and operator response, and the overall progression of a fire event from initiation through final resolution. Over this same time period, a number of significant fire incidents have occurred at nuclear power plants around the world. Insights gained from US experience have been used in US studies as the statistical basis for establishing fire initiation frequencies both as a function of the plant area and the initiating fire source.To a lesser extent, the fire experience has also been used to assess the general severity and duration of fires. However, aside from these statistical analyses, the incidents have rarely been scrutinized in detail to verify the underlying assumptions of fire PRAs. This paper discusses an effort, under which a set of fire incidents are being reviewed in order to gain insights directly relevant to the methods, data, and assumptions that form the basis for current fire PRAs. The paper focuses on the objectives of the effort, the specific fire events being reviews methodology, and anticipated follow-on activities

A method for analysing incidents due to human errors on nuclear installations

International Nuclear Information System (INIS)

Griffon, M.

1980-01-01

This paper deals with the development of a methodology adapted to a detailed analysis of incidents considered to be due to human errors. An identification of human errors and a search for their eventual multiple causes is then needed. They are categorized in eight classes: education and training of personnel, installation design, work organization, time and work duration, physical environment, social environment, history of the plant and performance of the operator. The method is illustrated by the analysis of a handling incident generated by multiple human errors. (author)

Methodological considerations for economic modelling of latent tuberculous infection screening in migrants.

Science.gov (United States)

Shedrawy, J; Siroka, A; Oxlade, O; Matteelli, A; Lönnroth, K

2017-09-01

Tuberculosis (TB) in migrants from endemic to low-incidence countries results mainly from the reactivation of latent tuberculous infection (LTBI). LTBI screening policies for migrants vary greatly between countries, and the evidence on the cost-effectiveness of the different approaches is weak and heterogeneous. The aim of this review was to assess the methodology used in published economic evaluations of LTBI screening among migrants to identify critical methodological options that must be considered when using modelling to determine value for money from different economic perspectives. Three electronic databases were searched and 10 articles were included. There was considerable variation across this small number of studies with regard to economic perspective, main outcomes, modelling technique, screening options and target populations considered, as well as in parameterisation of the epidemiological situation, test accuracy, efficacy, safety and programme performance. Only one study adopted a societal perspective; others adopted a health care or wider government perspective. Parameters representing the cascade of screening and treating LTBI varied widely, with some studies using highly aspirational scenarios. This review emphasises the need for a more harmonised approach for economic analysis, and better transparency in how policy options and economic perspectives influence methodological choices. Variability is justifiable for some parameters. However, sufficient data are available to standardise others. A societal perspective is ideal, but can be challenging due to limited data. Assumptions about programme performance should be based on empirical data or at least realistic assumptions. Results should be interpreted within specific contexts and policy options, with cautious generalisations.

Congenital Hypothyroidism: Increased Incidence in Yazd Province, Iran

Directory of Open Access Journals (Sweden)

M. Noori-Shadkam

2012-07-01

Full Text Available Introduction: Congenital hypothyroidism (CH is one of the most common preventable causes of mental retardation. Its worldwide incidence is estimated to be one in 2500-5500 births. Assessment of thyroid gland in neonates is critical. The aims of this study were to demonstrate the incidence of CH in neonates born in Yazd province, Iran in 1389 (2010 and compare the results with other reported studies and investigate biochemical characteristics of affected infants. Materials & Methods: This is an analytical descriptive cross-sectional study. The study was conducted on all infants (13022 births born in 1389 (March 2010-March 2011. Thyroid stimulating hormone (TSH was measured using ELISA technique. Results: Forty five infants suffered from congenital hypothyroidism with an overall incidence of one in 289 live births. Twenty five of the diagnosed infants were males (incidence 1:261 and twenty were females (incidence 1:325. The incidence of CH in boys was more than girls (P-value = 0.295. The highest incidence of CH was observed in spring followed by summer and the lowest incidence was in autumn followed by winter (P-value=0.000. Conclusion: The CH incidence was 10.3 to 13.8 times more than other countries. The highest CH incidence was in spring followed by summer and the lowest incidence was in autumn followed by winter. It is important that a larger size of cases need to be screened and more information on the aetiology of the affected infants to be obtained

Technologies, Methodologies and Challenges in Network Intrusion Detection and Prevention Systems

Directory of Open Access Journals (Sweden)

Nicoleta STANCIU

2013-01-01

Full Text Available This paper presents an overview of the technologies and the methodologies used in Network Intrusion Detection and Prevention Systems (NIDPS. Intrusion Detection and Prevention System (IDPS technologies are differentiated by types of events that IDPSs can recognize, by types of devices that IDPSs monitor and by activity. NIDPSs monitor and analyze the streams of network packets in order to detect security incidents. The main methodology used by NIDPSs is protocol analysis. Protocol analysis requires good knowledge of the theory of the main protocols, their definition, how each protocol works.

Safety at Work : Research Methodology

NARCIS (Netherlands)

Beurden, van K. (Karin); Boer, de J. (Johannes); Brinks, G. (Ger); Goering-Zaburnenko, T. (Tatiana); Houten, van Y. (Ynze); Teeuw, W. (Wouter)

2012-01-01

In this document, we provide the methodological background for the Safety atWork project. This document combines several project deliverables as defined inthe overall project plan: validation techniques and methods (D5.1.1), performanceindicators for safety at work (D5.1.2), personal protection

A Methodology for Integrating Maintainability Using Software Metrics

OpenAIRE

Lewis, John A.; Henry, Sallie M.

1989-01-01

Maintainability must be integrated into software early in the development process. But for practical use, the techniques used must be as unobtrusive to the existing software development process as possible. This paper defines a methodology for integrating maintainability into large-scale software and describes an experiment which implemented the methodology into a major commercial software development environment.

In vitro cumulative gas production techniques: history, methodological considerations and challenges

NARCIS (Netherlands)

Rymer, C.; Huntington, J.A.; Williams, B.A.; Givens, D.I.

2005-01-01

Methodology used to measure in vitro gas production is reviewed to determine impacts of sources of variation on resultant gas production profiles (GPP). Current methods include measurement of gas production at constant pressure (e.g., use of gas tight syringes), a system that is inexpensive, but may

Adaptability of laser diffraction measurement technique in soil physics methodology

Science.gov (United States)

Barna, Gyöngyi; Szabó, József; Rajkai, Kálmán; Bakacsi, Zsófia; Koós, Sándor; László, Péter; Hauk, Gabriella; Makó, András

2016-04-01

There are intentions all around the world to harmonize soils' particle size distribution (PSD) data by the laser diffractometer measurements (LDM) to that of the sedimentation techniques (pipette or hydrometer methods). Unfortunately, up to the applied methodology (e. g. type of pre-treatments, kind of dispersant etc.), PSDs of the sedimentation methods (due to different standards) are dissimilar and could be hardly harmonized with each other, as well. A need was arisen therefore to build up a database, containing PSD values measured by the pipette method according to the Hungarian standard (MSZ-08. 0205: 1978) and the LDM according to a widespread and widely used procedure. In our current publication the first results of statistical analysis of the new and growing PSD database are presented: 204 soil samples measured with pipette method and LDM (Malvern Mastersizer 2000, HydroG dispersion unit) were compared. Applying usual size limits at the LDM, clay fraction was highly under- and silt fraction was overestimated compared to the pipette method. Subsequently soil texture classes determined from the LDM measurements significantly differ from results of the pipette method. According to previous surveys and relating to each other the two dataset to optimizing, the clay/silt boundary at LDM was changed. Comparing the results of PSDs by pipette method to that of the LDM, in case of clay and silt fractions the modified size limits gave higher similarities. Extension of upper size limit of clay fraction from 0.002 to 0.0066 mm, and so change the lower size limit of silt fractions causes more easy comparability of pipette method and LDM. Higher correlations were found between clay content and water vapor adsorption, specific surface area in case of modified limit, as well. Texture classes were also found less dissimilar. The difference between the results of the two kind of PSD measurement methods could be further reduced knowing other routinely analyzed soil parameters

[Use of the critical incident technique in the development of a measurement tool for satisfaction in psychiatry].

Science.gov (United States)

Pourin, C; Daucourt, V; Barberger-Gateau, P

2001-06-01

Health care centers will have to set up a regular survey of their patients' satisfaction, in addition to the discharge questionnaire. Few instruments for measuring satisfaction are at present available. A working group associating 10 psychiatric hospitals in Aquitaine conducted a study on the specificity of this measure in psychiatry. To record the patient's perception on the stay in order to identify areas of satisfaction and dissatisfaction as perceived and reported by himself, using a qualitative approach. The critical incident technique was used in 3 volunteer hospitals, in patients hospitalised in psychiatric wards selected by their doctor. Interview using a semi-structured questionnaire were conducted by an investigator external to the departments. Data were analysed in a qualitative way. 32 interviews could be analysed, and 215 events were extracted. These events were classified in 12 themes. The events identified from these interviews have allowed identification of new areas of patient satisfaction, which could be used to build additional items centered on patients' preoccupations.

La interpretacion consecutiva: metodologia y tecnicas (Consecutive Interpretation: Methodology and Techniques).

Science.gov (United States)

Drallny, Ines

1987-01-01

Describes the purpose and appropriate methodology for various levels of interpreter training, for both consecutive and simultaneous interpretation. The importance of relating the intent of the text to the explicit language forms through which that intent is realized is discussed, and appropriate criteria for evaluation of student interpreters are…

HIV Incidence Remains High in KwaZulu-Natal, South Africa: Evidence from Three Districts

NARCIS (Netherlands)

Nel, Annaléne; Mabude, Zonke; Smit, Jenni; Kotze, Philip; Arbuckle, Derek; Wu, Jian; van Niekerk, Neliëtte; van de Wijgert, Janneke

2012-01-01

Background: HIV prevalence and incidence among sexually active women in peri-urban areas of Ladysmith, Edendale, and Pinetown, KwaZulu-Natal, South Africa, were assessed between October 2007 and February 2010 in preparation for vaginal microbicide trials. Methodology/Principal Findings: Sexually

Application of a methodology for retouching

Directory of Open Access Journals (Sweden)

Ana Bailão

2010-11-01

Full Text Available Between November 2006 and January 2010, an investigation into retouching methodologies was carried out. The aim of this paper is to describe, in four steps, the retouching methodology of a contemporary painting. The four steps are: chromatic and formal study, considering the use of Gestalt theory and the phenomena of contrast and assimilation; selection of the technique; choice of the materials and retouching practice.Entre Novembre 2006 et Janvier 2010, nous avons fait une recherche dans le cadre du programme de Maitrise sur la méthodologie et les techniques de retouche. Le but de cet article est la description, en quatre étapes, de la méthodologie de retouche d’une peinture contemporaine. Les quatre étapes sont: étude chromatique et formelle, avec l’utilisation de la théorie de la Gestalt et des phénomènes de contraste et assimilation, la sélection de la technique, le choix des matériaux et la pratique de retouche. 

An LWR design decision Methodology

International Nuclear Information System (INIS)

Leahy, T.J.; Rees, D.C.; Young, J.

1982-01-01

While all parties involved in nuclear plant regulation endeavor to make decisions which optimize the considerations of plant safety and financial impacts, these decisions are generally made without the benefit of a systematic and rigorous approach to the questions confronting the decision makers. A Design Decision Methodology has been developed which provides such a systematic approach. By employing this methodology, which makes use of currently accepted probabilistic risk assessment techniques and cost estimation, informed decisions may be made against a background of comparisons between the relative levels of safety and costs associated with various design alternatives

The distributional incidence of the gasoline tax in Chile

International Nuclear Information System (INIS)

Agostini, Claudio A.; Jiménez, Johanna

2015-01-01

This paper analyzes the distributional incidence of the excise tax on gasoline in Chile using Household Budget Surveys. The incidence is calculated with respect to both income and expenditure distributions in order to consider the potential differences between transitory and permanent income. The Suits Index is estimated as a measure of the degree of progressivity of the tax, and confidence intervals are calculated using a bootstrap methodology to statistically compare changes in the incidence given changes in the tax. The results show that the tax, contrary to the evidence for several developed countries, is slightly or moderately progressive, with a lower degree of progressivity observed in the calculations based on income than those based on expenditure. The simulation of the 25% reduction in the tax rate implemented in 2008 shows that, in terms of incidence, its effect is to reduce the progressivity of the gasoline tax, which is the opposite of what was sought by the government with this policy. -- Highlights: •Gasoline tax is an optimal tax and is a significant instrument of climate policy. •Despite its benefits, it faces political economy challenges in its implementation. •In the public discussion in developing countries the tax is considered regressive. •The estimation of the distributional incidence shows that it is slightly progressive. •Increases in gasoline taxes can reduce both negative externalities and inequality

Melanoma in Organ Transplant Recipients: Incidence, Outcomes and Management Considerations

Directory of Open Access Journals (Sweden)

Faisal R. Ali

2012-01-01

Full Text Available The incidence of melanoma continues to increase year on year. With better surgical techniques and medical management, greater numbers of organ transplants are being performed annually with much longer graft survival. The authors review our current understanding of the incidence of melanoma amongst organ transplant recipients, outcomes compared to the immunocompetent population, and management strategies in this burgeoning group.

Improving patient safety: how and why incidences occur in nursing care

Directory of Open Access Journals (Sweden)

Maria Cecilia Toffoletto

2013-10-01

Full Text Available The present investigation was a cross-sectional, quantitative research study analyzing incidents associated with nursing care using a root-cause methodological analysis. The study was conducted in a public hospital intensive care unit (ICU in Santiago de Chile and investigated 18 incidents related to nursing care that occurred from January to March of 2012. The sample was composed of six cases involving medications and the self-removal of therapeutic devices. The contributing factors were related to the tasks and technology, the professional work team, the patients, and the environment. The analysis confirmed that the cases presented with similar contributing factors, thereby indicating that the vulnerable aspects of the system are primarily responsible for the incidence occurrence. We conclude that root-cause analysis facilitates the identification of these vulnerable points. Proactive management in system-error prevention is made possible by recommendations.

Interaction between HIV Awareness, Knowledge, Safe Sex Practice and HIV Incidence: Evidence from Botswana

OpenAIRE

Ranjan Ray; Kompal Sinha

2011-01-01

This paper makes methodological and empirical contributions to the study of HIV awareness, knowledge, incidence and safe sex practice in the context of Botswana, one of the most HIV prone countries in the world. While the focus is on Botswana, the paper presents comparable evidence from India to put the Botswana results in perspective. The results point to the strong role played by affluence and education in increasing HIV knowledge, promoting safe sex and reducing HIV incidence. The study pr...

Methodology for the application of probabilistic safety assessment techniques (PSA) to the cobalt-therapy units in Cuba

International Nuclear Information System (INIS)

Vilaragut Llanes, J.J.; Ferro Fernandez, R.; Troncoso Fleitas, M.; Lozano Lima, B.; Fuente Puch, A. de la; Perez Reyes, Y.; Dumenigo Gonzalez, C.

2001-01-01

The applications of PSA techniques in the nuclear power plants during the last two decades and the positive results obtained for decision making in relation with safety, as a complement to deterministic methods, have increased their use in the rest of the nuclear applications. At present a large set of documents from international institutions can be found summarizing the investigations carried out in this field and promoting their use in radioactive facilities. Although still without a mandatory character, the new regulations on radiological safety also promote the complete or partial application of the PSA techniques in the safety assessment of the radiological practices. Also the IAEA, through various programs in which Cuba has been inserted, is taking a group of actions so that the nuclear community will encourage the application of the probabilistic risk methods for the evaluations and decision making with respect to safety. However, the fact that in no radioactive installation has a complete PSA study been carried out, makes that certain methodological aspects require to be improved and modified for the application of these techniques. This work presents the main elements for the use of PSA in the evaluation of the safety of cobalt-therapy units in Cuba. Also presented, as part of the results of the first stage of the Study, are the Guidelines that are being applied in a Research Contract with the Agency by the authors themselves, who belong to the CNSN, together with other specialists from the Cuban Ministry of Public Health. (author) [es

Beam optimization: improving methodology

International Nuclear Information System (INIS)

Quinteiro, Guillermo F.

2004-01-01

Different optimization techniques commonly used in biology and food technology allow a systematic and complete analysis of response functions. In spite of the great interest in medical and nuclear physics in the problem of optimizing mixed beams, little attention has been given to sophisticate mathematical tools. Indeed, many techniques are perfectly suited to the typical problem of beam optimization. This article is intended as a guide to the use of two methods, namely Response Surface Methodology and Simplex, that are expected to fasten the optimization process and, meanwhile give more insight into the relationships among the dependent variables controlling the response

Tornado missile simulation and design methodology. Volume 1: simulation methodology, design applications, and TORMIS computer code. Final report

International Nuclear Information System (INIS)

Twisdale, L.A.; Dunn, W.L.

1981-08-01

A probabilistic methodology has been developed to predict the probabilities of tornado-propelled missiles impacting and damaging nuclear power plant structures. Mathematical models of each event in the tornado missile hazard have been developed and sequenced to form an integrated, time-history simulation methodology. The models are data based where feasible. The data include documented records of tornado occurrence, field observations of missile transport, results of wind tunnel experiments, and missile impact tests. Probabilistic Monte Carlo techniques are used to estimate the risk probabilities. The methodology has been encoded in the TORMIS computer code to facilitate numerical analysis and plant-specific tornado missile probability assessments. Sensitivity analyses have been performed on both the individual models and the integrated methodology, and risk has been assessed for a hypothetical nuclear power plant design case study

Factors precipitating the risk of aspiration in hospitalized patients: findings from a multicentre critical incident technique study.

Science.gov (United States)

Palese, Alvisa; Lesa, Lucia; Stroppolo, Giulia; Lupieri, Giulia; Tardivo, Stefano; Brusaferro, Silvio

2017-04-01

To elucidate factors, other than those clinical, precipitating the risk of aspiration in hospitalized patients. The Critical Incident Technique was adopted for this study in 2015. Three departments located in two academic hospitals in the northeast of Italy, equipped with 800 and 1500 beds, respectively. A purposeful sample of 12 registered nurses (RN), all of whom (i) had reported one or more episodes of aspiration during the longitudinal survey, (ii) had worked ≥3 years in the department, and (iii) were willing to participate, were included. Antecedent factors involved in episodes of aspiration as experienced by RNs were collected through an open-ended interview, and qualitatively analysed. In addition to clinical factors, other factors interacting with each other may precipitate the risk of aspiration episodes during hospitalization: at the nursing care level (misclassifying patients, transferring tasks to other healthcare professionals and standardizing processes to remove potential threats); at the family level (misclassifying patients, dealing with the cultural relevance of eating) and at the environmental level (positioning the patient, managing time pressures, distracting patient while eating, dealing with food consistency and irritating oral medication). At the hospital level, an adequate nursing workforce and models of care delivery, as well as time for initial and continuing patient and family assessment are required. At the unit level, patient-centred models of care aimed at reducing care standardization are also recommended; in addition, nursing, family and environmental factors should be recorded in the incident reports documenting episodes of aspiration. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

WE-B-BRC-01: Current Methodologies in Risk Assessment

Energy Technology Data Exchange (ETDEWEB)

Rath, F. [University of Wisconsin Madison (United States)

2016-06-15

Prospective quality management techniques, long used by engineering and industry, have become a growing aspect of efforts to improve quality management and safety in healthcare. These techniques are of particular interest to medical physics as scope and complexity of clinical practice continue to grow, thus making the prescriptive methods we have used harder to apply and potentially less effective for our interconnected and highly complex healthcare enterprise, especially in imaging and radiation oncology. An essential part of most prospective methods is the need to assess the various risks associated with problems, failures, errors, and design flaws in our systems. We therefore begin with an overview of risk assessment methodologies used in healthcare and industry and discuss their strengths and weaknesses. The rationale for use of process mapping, failure modes and effects analysis (FMEA) and fault tree analysis (FTA) by TG-100 will be described, as well as suggestions for the way forward. This is followed by discussion of radiation oncology specific risk assessment strategies and issues, including the TG-100 effort to evaluate IMRT and other ways to think about risk in the context of radiotherapy. Incident learning systems, local as well as the ASTRO/AAPM ROILS system, can also be useful in the risk assessment process. Finally, risk in the context of medical imaging will be discussed. Radiation (and other) safety considerations, as well as lack of quality and certainty all contribute to the potential risks associated with suboptimal imaging. The goal of this session is to summarize a wide variety of risk analysis methods and issues to give the medical physicist access to tools which can better define risks (and their importance) which we work to mitigate with both prescriptive and prospective risk-based quality management methods. Learning Objectives: Description of risk assessment methodologies used in healthcare and industry Discussion of radiation oncology

WE-B-BRC-01: Current Methodologies in Risk Assessment

International Nuclear Information System (INIS)

Rath, F.

2016-01-01

Prospective quality management techniques, long used by engineering and industry, have become a growing aspect of efforts to improve quality management and safety in healthcare. These techniques are of particular interest to medical physics as scope and complexity of clinical practice continue to grow, thus making the prescriptive methods we have used harder to apply and potentially less effective for our interconnected and highly complex healthcare enterprise, especially in imaging and radiation oncology. An essential part of most prospective methods is the need to assess the various risks associated with problems, failures, errors, and design flaws in our systems. We therefore begin with an overview of risk assessment methodologies used in healthcare and industry and discuss their strengths and weaknesses. The rationale for use of process mapping, failure modes and effects analysis (FMEA) and fault tree analysis (FTA) by TG-100 will be described, as well as suggestions for the way forward. This is followed by discussion of radiation oncology specific risk assessment strategies and issues, including the TG-100 effort to evaluate IMRT and other ways to think about risk in the context of radiotherapy. Incident learning systems, local as well as the ASTRO/AAPM ROILS system, can also be useful in the risk assessment process. Finally, risk in the context of medical imaging will be discussed. Radiation (and other) safety considerations, as well as lack of quality and certainty all contribute to the potential risks associated with suboptimal imaging. The goal of this session is to summarize a wide variety of risk analysis methods and issues to give the medical physicist access to tools which can better define risks (and their importance) which we work to mitigate with both prescriptive and prospective risk-based quality management methods. Learning Objectives: Description of risk assessment methodologies used in healthcare and industry Discussion of radiation oncology

National and Regional Surveys of Radon Concentration in Dwellings. Review of Methodology and Measurement Techniques

International Nuclear Information System (INIS)

2013-01-01

Reliable, comparable and 'fit for purpose' results are essential requirements for any decision based on analytical measurements. For the analyst, the availability of tested and validated sampling and analytical procedures is an extremely important tool for carrying out such measurements. For maximum utility, such procedures should be comprehensive, clearly formulated and readily available to both the analyst and the customer for reference. In the specific case of radon surveys, it is very important to design a survey in such a way as to obtain results that can reasonably be considered representative of a population. Since 2004, the Environment Programme of the IAEA has included activities aimed at the development of a set of procedures for the measurement of radionuclides in terrestrial environmental samples. The development of radon measurement procedures for national and regional surveys started with the collection and review of more than 160 relevant scientific papers. On the basis of this review, this publication summarizes the methodology and the measurement techniques suitable for a population representative national or regional survey on radon concentration in the indoor air of dwellings. The main elements of the survey design are described and discussed, such as the sampling scheme, the protocols, the questionnaire and the data analysis, with particular attention to the potential biases that can affect the representativeness of the results. Moreover, the main measurement techniques suitable for national surveys on indoor radon are reviewed, with particular attention to the elements that can affect the precision and accuracy of the results

National and Regional Surveys of Radon Concentration in Dwellings. Review of Methodology and Measurement Techniques

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-12-15

Reliable, comparable and 'fit for purpose' results are essential requirements for any decision based on analytical measurements. For the analyst, the availability of tested and validated sampling and analytical procedures is an extremely important tool for carrying out such measurements. For maximum utility, such procedures should be comprehensive, clearly formulated and readily available to both the analyst and the customer for reference. In the specific case of radon surveys, it is very important to design a survey in such a way as to obtain results that can reasonably be considered representative of a population. Since 2004, the Environment Programme of the IAEA has included activities aimed at the development of a set of procedures for the measurement of radionuclides in terrestrial environmental samples. The development of radon measurement procedures for national and regional surveys started with the collection and review of more than 160 relevant scientific papers. On the basis of this review, this publication summarizes the methodology and the measurement techniques suitable for a population representative national or regional survey on radon concentration in the indoor air of dwellings. The main elements of the survey design are described and discussed, such as the sampling scheme, the protocols, the questionnaire and the data analysis, with particular attention to the potential biases that can affect the representativeness of the results. Moreover, the main measurement techniques suitable for national surveys on indoor radon are reviewed, with particular attention to the elements that can affect the precision and accuracy of the results.

Using Pareto Analysis with Trend Analysis: Statistical Techniques to Investigate Incident Reports within a Housing System

Science.gov (United States)

Luna, Andrew L.

1998-01-01

The purpose of this study was to determine trends and difficulties concerning student incident reports within the residence halls as they relate to the incident reporting system from the Department of Housing and Residential Life at a Southeastern Doctoral I Granting Institution. This study used the frequency distributions of each classified…

Incidents at nuclear power plants caused by the human factor

International Nuclear Information System (INIS)

Mashin, V. A.

2012-01-01

Psychological analysis of the causes of incorrect actions by personnel is discussed as presented in the report “Methodological guidelines for analyzing the causes of incidents in the operation of nuclear power plants.” The types of incorrect actions and classification of the root causes of errors by personnel are analyzed. Recommendations are made for improvements in the psychological analysis of causes of incorrect actions by personnel.

Quality of nursing care perceived by patients and their nurses: an application of the critical incident technique. Part 1.

Science.gov (United States)

Redfern, S; Norman, I

1999-07-01

The aims of the study were to identify indicators of quality of nursing care from the perceptions of patients and nurses, and to determine the congruence between patients' and nurses' perceptions. The paper is presented in two parts. Part 1 includes the background and methods to the study and the findings from the comparison of patients' and nurses' perceptions. Part 2 describes the perceptions of patients and nurses, and the conclusions drawn from the study as a whole. Patients and nurses in hospital wards were interviewed using the critical incident technique. We grouped 4546 indicators of high and low quality nursing care generated from the interview transcripts into 316 subcategories, 68 categories and 31 themes. Congruence between patients' and nurses' perceptions of quality was high and significant, although there was some difference of emphasis.

Low pacemaker incidence with continuous-sutured valves: a retrospective analysis.

Science.gov (United States)

Niclauss, Lars; Delay, Dominique; Pfister, Raymond; Colombier, Sebastien; Kirsch, Matthias; Prêtre, René

2017-06-01

Background Permanent pacemaker implantation after surgical aortic valve replacement depends on patient selection and risk factors for conduction disorders. We aimed to identify risk criteria and obtain a selected group comparable to patients assigned to transcatheter aortic valve implantation. Methods Isolated sutured aortic valve replacements in 994 patients treated from 2007 to 2015 were reviewed. Demographics, hospital stay, preexisting conduction disorders, surgical technique, and etiology in patients with and without permanent pacemaker implantation were compared. Reported outcomes after transcatheter aortic valve implantation were compared with those of a subgroup including only degenerative valve disease and first redo. Results The incidence of permanent pacemaker implantation was 2.9%. Longer hospital stay ( p = 0.01), preexisting rhythm disorders ( p pacemaker implantation. Although prostheses were sutured with continuous monofilament in the majority of cases (86%), interrupted pledgetted sutures were used more often in the pacemaker group ( p = 0.002). In the subgroup analysis, the incidence of permanent pacemaker implantation was 2%; preexisting rhythm disorders and the suture technique were still major risk factors. Conclusion Permanent pacemaker implantation depends on etiology, preexisting rhythm disorders, and suture technique, and the 2% incidence compares favorably with the reported 5- to 10-fold higher incidence after transcatheter aortic valve implantation. Cost analysis should take this into account. Often dismissed as minor complication, permanent pacemaker implantation increases the risks of endocarditis, impaired myocardial recovery, and higher mortality if associated with prosthesis regurgitation.

Methodological proposal for the definition of improvement strategies in logistics of SME

Directory of Open Access Journals (Sweden)

Yeimy Liseth Becerra

2014-12-01

Full Text Available A methodological proposal for defining strategies of improvement in logistics of SMEs is presented as a means to fulfill a specific objective of the project Methodological design on storage logistics, acquisition, ownership of information systems and communication for Colombian SMEs, baker subsector, which currently runs the research group SEPRO, of Universidad Nacional of Colombia and supported by Colciencias. The project corresponds to the completion of the last stage of the base project, and aims to implement the corresponding target, raised in the research project that has been developing the research group SEPRO. To do this, it was made a review of the methodology used during the execution of the basic project, as well as the state of the art of techniques used in similar research for the evaluation and definition of breeding strategies in SMEs logistics. Revised techniques were compared and a proposed methodology was configured, which consists of the techniques that represented the greatest advantages for the research development.

Formalizing the ISDF Software Development Methodology

Directory of Open Access Journals (Sweden)

Mihai Liviu DESPA

2015-01-01

Full Text Available The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of what makes a web application innovative. Innovation in software development is presented from the end-user, project owner and project manager’s point of view. The main components of a software development methodology are identified. Thus a software development methodology should account for people, roles, skills, teams, tools, techniques, processes, activities, standards, quality measuring tools, and team values. Current software development models are presented and briefly analysed. The need for a dedicated innovation oriented software development methodology is emphasized by highlighting shortcomings of current software development methodologies when tackling innovation. The ISDF methodology is presented in the context of developing an actual application. The ALHPA application is used as a case study for emphasizing the characteristics of the ISDF methodology. The development life cycle of the ISDF methodology includes research, planning, prototyping, design, development, testing, setup and maintenance. Artefacts generated by the ISDF methodology are presented. Quality is managed in the ISDF methodology by assessing compliance, usability, reliability, repeatability, availability and security. In order to properly asses each quality component a dedicated indicator is built. A template for interpreting each indicator is provided. Conclusions are formulated and new related research topics are submitted for debate.

A novelty detection diagnostic methodology for gearboxes operating under fluctuating operating conditions using probabilistic techniques

Science.gov (United States)

Schmidt, S.; Heyns, P. S.; de Villiers, J. P.

2018-02-01

In this paper, a fault diagnostic methodology is developed which is able to detect, locate and trend gear faults under fluctuating operating conditions when only vibration data from a single transducer, measured on a healthy gearbox are available. A two-phase feature extraction and modelling process is proposed to infer the operating condition and based on the operating condition, to detect changes in the machine condition. Information from optimised machine and operating condition hidden Markov models are statistically combined to generate a discrepancy signal which is post-processed to infer the condition of the gearbox. The discrepancy signal is processed and combined with statistical methods for automatic fault detection and localisation and to perform fault trending over time. The proposed methodology is validated on experimental data and a tacholess order tracking methodology is used to enhance the cost-effectiveness of the diagnostic methodology.

X-ray grazing incidence diffraction from multilayers

Energy Technology Data Exchange (ETDEWEB)

Tixier, S.; Boeni, P.; Swygenhoven, H. van; Horisberger, M. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1997-09-01

Grazing incidence scattering geometries using synchrotron radiation have been applied in order to characterise the roughness profiles and the structural coherence of multilayers. The lateral correlation length of the roughness profiles was evaluated using diffuse reflectivity in the `out of plane` geometry. This type of measurement is the only diffuse reflectivity technique allowing large lateral momentum transfer. It is typically suitable for correlation lengths smaller than 1000 A. The lateral structural coherence length of Ni{sub 3}Al/Ni multilayers as a function of the layer thickness was obtained by grazing incidence diffraction (GID). 3 figs., 1 ref.

The Development of Marine Accidents Human Reliability Assessment Approach: HEART Methodology and MOP Model

Directory of Open Access Journals (Sweden)

Ludfi Pratiwi Bowo

2017-06-01

Full Text Available Humans are one of the important factors in the assessment of accidents, particularly marine accidents. Hence, studies are conducted to assess the contribution of human factors in accidents. There are two generations of Human Reliability Assessment (HRA that have been developed. Those methodologies are classified by the differences of viewpoints of problem-solving, as the first generation and second generation. The accident analysis can be determined using three techniques of analysis; sequential techniques, epidemiological techniques and systemic techniques, where the marine accidents are included in the epidemiological technique. This study compares the Human Error Assessment and Reduction Technique (HEART methodology and the 4M Overturned Pyramid (MOP model, which are applied to assess marine accidents. Furthermore, the MOP model can effectively describe the relationships of other factors which affect the accidents; whereas, the HEART methodology is only focused on human factors.

Continuous culture apparatus and methodology

International Nuclear Information System (INIS)

Conway, H.L.

1975-01-01

At present, we are investigating the sorption of potentially toxic trace elements by phytoplankton under controlled laboratory conditions. Continuous culture techniques were used to study the mechanism of the sorption of the trace elements by unialgal diatom populations and the factors influencing this sorption. Continuous culture methodology has been used extensively to study bacterial kinetics. It is an excellent technique for obtaining a known physiological state of phytoplankton populations. An automated method for the synthesis of continuous culture medium for use in these experiments is described

Applying Statistical Process Quality Control Methodology to Educational Settings.

Science.gov (United States)

Blumberg, Carol Joyce

A subset of Statistical Process Control (SPC) methodology known as Control Charting is introduced. SPC methodology is a collection of graphical and inferential statistics techniques used to study the progress of phenomena over time. The types of control charts covered are the null X (mean), R (Range), X (individual observations), MR (moving…

Stress measurements by multi-reflection grazing-incidence X-ray diffraction method (MGIXD) using different radiation wavelengths and different incident angles

International Nuclear Information System (INIS)

Marciszko, Marianna; Baczmański, Andrzej; Braham, Chedly; Wróbel, Mirosław; Wroński, Sebastian; Cios, Grzegorz

2017-01-01

The presented study introduces the development of the multi-reflection grazing-incidence X-ray diffraction method (MGIXD) for residual stress determination. The proposed new methodology is aimed at obtaining more reliable experimental data and increasing the depth of non-destructive stress determination below the sample surface. To verify proposed method measurements were performed on a classical X-ray diffractometer (Cu Kα radiation) and using synchrotron radiation (three different wavelengths: λ = 1.2527 Å, λ = 1.5419 Å and λ = 1.7512 Å). The Al2017 alloy subjected to three different surface treatments was investigated in this study. The obtained results showed that the proposed development of MGIXD method, in which not only different incident angles but also different wavelengths of X-ray are used, can be successfully applied for residual stress determination, especially when stress gradients are present in the sample.

Techniques of radiation dosimetry

International Nuclear Information System (INIS)

Mahesk, K.

1985-01-01

A text and reference with an interdisciplinary approach to physics, atomic energy, radiochemistry, and radiobiology. Chapters examine basic principles, experimental techniques, the methodology of dose experiments, and applications. Treats 14 different dosimetric techniques, including ionization chamber, thermoluminescence, and lyoluminescence. Considers the conceptual aspects and characteristic features of radiation

Adjusting for the Incidence of Measurement Errors in Multilevel ...

African Journals Online (AJOL)

the incidence of measurement errors using these techniques generally revealed coefficient estimates of ... physical, biological, social and medical science, measurement errors are found. The errors are ... (M) and Science and Technology (ST).

Bayesian geostatistical modeling of leishmaniasis incidence in Brazil.

Directory of Open Access Journals (Sweden)

Dimitrios-Alexios Karagiannis-Voules

Full Text Available BACKGROUND: Leishmaniasis is endemic in 98 countries with an estimated 350 million people at risk and approximately 2 million cases annually. Brazil is one of the most severely affected countries. METHODOLOGY: We applied Bayesian geostatistical negative binomial models to analyze reported incidence data of cutaneous and visceral leishmaniasis in Brazil covering a 10-year period (2001-2010. Particular emphasis was placed on spatial and temporal patterns. The models were fitted using integrated nested Laplace approximations to perform fast approximate Bayesian inference. Bayesian variable selection was employed to determine the most important climatic, environmental, and socioeconomic predictors of cutaneous and visceral leishmaniasis. PRINCIPAL FINDINGS: For both types of leishmaniasis, precipitation and socioeconomic proxies were identified as important risk factors. The predicted number of cases in 2010 were 30,189 (standard deviation [SD]: 7,676 for cutaneous leishmaniasis and 4,889 (SD: 288 for visceral leishmaniasis. Our risk maps predicted the highest numbers of infected people in the states of Minas Gerais and Pará for visceral and cutaneous leishmaniasis, respectively. CONCLUSIONS/SIGNIFICANCE: Our spatially explicit, high-resolution incidence maps identified priority areas where leishmaniasis control efforts should be targeted with the ultimate goal to reduce disease incidence.

Incidence of retear with double-row versus single-row rotator cuff repair.

Science.gov (United States)

Shen, Chong; Tang, Zhi-Hong; Hu, Jun-Zu; Zou, Guo-Yao; Xiao, Rong-Chi

2014-11-01

Rotator cuff tears have a high recurrence rate, even after arthroscopic rotator cuff repair. Although some biomechanical evidence suggests the superiority of the double-row vs the single-row technique, clinical findings regarding these methods have been controversial. The purpose of this study was to determine whether the double-row repair method results in a lower incidence of recurrent tearing compared with the single-row method. Electronic databases were systematically searched to identify reports of randomized, controlled trials (RCTs) comparing single-row with double-row rotator cuff repair. The primary outcome assessed was retear of the repaired cuff. Secondary outcome measures were the American Shoulder and Elbow Surgeons (ASES) shoulder score, the Constant shoulder score, and the University of California, Los Angeles (UCLA) score. Heterogeneity between the included studies was assessed. Six studies involving 428 patients were included in the review. Compared with single-row repair, double-row repair demonstrated a lower retear incidence (risk ratio [RR]=1.71 [95% confidence interval (CI), 1.18-2.49]; P=.005; I(2)=0%) and a reduced incidence of partial-thickness retears (RR=2.16 [95% CI, 1.26-3.71]; P=.005; I(2)=26%). Functional ASES, Constant, and UCLA scores showed no difference between single- and double-row cuff repairs. Use of the double-row technique decreased the incidence of retears, especially partial-thickness retears, compared with the single-row technique. The functional outcome was not significantly different between the 2 techniques. To improve the structural outcome of the repaired rotator cuff, surgeons should use the double-row technique. However, further long-term RCTs on this topic are needed. Copyright 2014, SLACK Incorporated.

Critical incidents connected to nurses' leadership in Intensive Care Units.

Science.gov (United States)

Lima, Elaine Cantarella; Bernardes, Andrea; Baldo, Priscila Lapaz; Maziero, Vanessa Gomes; Camelo, Silvia Helena Henriques; Balsanelli, Alexandre Pazetto

2017-01-01

The goal of this study is to analyze nurses' leadership in intensive care units at hospitals in the state of São Paulo, Brazil, in the face of positive and negative critical incidents. Exploratory, descriptive study, conducted with 24 nurses by using the Critical Incident Technique as a methodological benchmark. Results were grouped into 61 critical incidents distributed into categories. Researchers came to the conclusion that leadership-related situations interfere with IC nurses' behaviors. Among these situations they found: difficulty in the communication process; conflicts in the daily exercise of nurses' activities; people management; and the setting of high quality care targets. Researchers identified a mixed leadership model, leading them to the conclusion that nurses' knowledge and practice of contemporary leadership theories/styles are crucial because they facilitate the communication process, focusing on behavioral aspects and beliefs, in addition to valuing flexibility. This positively impacts the organization's results. Analisar a liderança do enfermeiro em Centros de Terapia Intensiva de hospitais localizados no interior do estado de São Paulo, diante de incidentes críticos positivos e negativos. Estudo exploratório, descritivo, realizado com 24 enfermeiros, que utilizou a Técnica do Incidente Crítico como referencial metodológico. Os resultados foram agrupados em 61 incidentes críticos distribuídos em categorias. Identificou-se que situações relacionadas à liderança interferem no comportamento do enfermeiro de Terapia Intensiva, dentre elas: dificuldade no processo de comunicação, conflitos existentes no dia a dia do exercício profissional, gerenciamento de pessoas e estabelecimento de metas para o alcance da assistência qualificada. Encontrou-se um modelo misto de liderança, o que permite concluir que o conhecimento e a prática dos enfermeiros acerca de teorias/estilos contemporâneos de liderança tornam-se fundamentais, pois

Methodology for Designing Operational Banking Risks Monitoring System

Science.gov (United States)

Kostjunina, T. N.

2018-05-01

The research looks at principles of designing an information system for monitoring operational banking risks. A proposed design methodology enables one to automate processes of collecting data on information security incidents in the banking network, serving as the basis for an integrated approach to the creation of an operational risk management system. The system can operate remotely ensuring tracking and forecasting of various operational events in the bank network. A structure of a content management system is described.

New Teaching Techniques to Improve Critical Thinking. The Diaprove Methodology

Science.gov (United States)

Saiz, Carlos; Rivas, Silvia F.

2016-01-01

The objective of this research is to ascertain whether new instructional techniques can improve critical thinking. To achieve this goal, two different instruction techniques (ARDESOS--group 1--and DIAPROVE--group 2--) were studied and a pre-post assessment of critical thinking in various dimensions such as argumentation, inductive reasoning,…

Critical infrastructure systems of systems assessment methodology.

Energy Technology Data Exchange (ETDEWEB)

Sholander, Peter E.; Darby, John L.; Phelan, James M.; Smith, Bryan; Wyss, Gregory Dane; Walter, Andrew; Varnado, G. Bruce; Depoy, Jennifer Mae

2006-10-01

Assessing the risk of malevolent attacks against large-scale critical infrastructures requires modifications to existing methodologies that separately consider physical security and cyber security. This research has developed a risk assessment methodology that explicitly accounts for both physical and cyber security, while preserving the traditional security paradigm of detect, delay, and respond. This methodology also accounts for the condition that a facility may be able to recover from or mitigate the impact of a successful attack before serious consequences occur. The methodology uses evidence-based techniques (which are a generalization of probability theory) to evaluate the security posture of the cyber protection systems. Cyber threats are compared against cyber security posture using a category-based approach nested within a path-based analysis to determine the most vulnerable cyber attack path. The methodology summarizes the impact of a blended cyber/physical adversary attack in a conditional risk estimate where the consequence term is scaled by a ''willingness to pay'' avoidance approach.

Photothermal heating as a methodology for post processing of polymeric nanofibers

Science.gov (United States)

Gorga, Russell; Clarke, Laura; Bochinski, Jason; Viswanath, Vidya; Maity, Somsubhra; Dong, Ju; Firestone, Gabriel

2015-03-01

Metal nanoparticles embedded within polymeric systems can be made to act as localized heat sources thereby aiding in-situ polymer processing. This is made possible by the surface plasmon resonance (SPR) mediated photothermal effect of metal (in this case gold) nanoparticles, wherein incident light absorbed by the nanoparticle generates a non-equilibrium electron distribution which subsequently transfers this energy into the surrounding medium, resulting in a temperature increase in the immediate region around the particle. Here we demonstrate this effect in polymer nanocomposite systems, specifically electrospun polyethylene oxide nanofibrous mats, which have been annealed at temperatures above the glass transition. A non-contact temperature measurement technique utilizing embedded fluorophores (perylene) has been used to monitor the average temperature within samples. The effect of annealing methods (conventional and photothermal) and annealing conditions (temperature and time) on the fiber morphology, overall crystallinity, and mechanical properties is discussed. This methodology is further utilized in core-sheath nanofibers to crosslink the core material, which is a pre-cured epoxy thermoset. NSF Grant CMMI-1069108.

An analysis of the human reliability on Three Mile Island II accident considering THERP and ATHEANA methodologies

International Nuclear Information System (INIS)

Fonseca, Renato Alves da; Alvim, Antonio Carlos Marques

2005-01-01

The research on the Analysis of the Human Reliability becomes more important every day, as well as the study of the human factors and the contributions of the same ones to the incidents and accidents, mainly in complex plants or of high technology. The analysis here developed it uses the methodologies THERP (Technique for Human Error Prediction) and ATHEANA (A Technique for Human Error Analysis), as well as, the tables and the cases presented in THERP Handbook and to develop a qualitative and quantitative study of an occurred nuclear accident. The chosen accident was it of Three Mile Island (TMI). The accident analysis has revealed a series of incorrect actions that resulted in the permanent loss of the reactor and shutdown of Unit 2. This study also aims at enhancing the understanding of the THERP and ATHEANA methods and at practical applications. In addition, it is possible to understand the influence of plant operational status on human failures and the influence of human failures on equipment of a system, in this case, a nuclear power plant. (author)

Review article: A systematic review of emergency department incident classification frameworks.

Science.gov (United States)

Murray, Matthew; McCarthy, Sally

2017-10-11

As in any part of the hospital system, safety incidents can occur in the ED. These incidents arguably have a distinct character, as the ED involves unscheduled flows of urgent patients who require disparate services. To aid understanding of safety issues and support risk management of the ED, a comparison of published ED specific incident classification frameworks was performed. A review of emergency medicine, health management and general medical publications, using Ovid SP to interrogate Medline (1976-2016) was undertaken to identify any type of taxonomy or classification-like framework for ED related incidents. These frameworks were then analysed and compared. The review identified 17 publications containing an incident classification framework. Comparison of factors and themes making up the classification constituent elements revealed some commonality, but no overall consistency, nor evolution towards an ideal framework. Inconsistency arises from differences in the evidential basis and design methodology of classifications, with design itself being an inherently subjective process. It was not possible to identify an 'ideal' incident classification framework for ED risk management, and there is significant variation in the selection of categories used by frameworks. The variation in classification could risk an unbalanced emphasis in findings through application of a particular framework. Design of an ED specific, ideal incident classification framework should be informed by a much wider range of theories of how organisations and systems work, in addition to clinical and human factors. © 2017 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Cancer incidence among Arab Americans in California, Detroit, and New Jersey SEER registries.

Science.gov (United States)

Bergmans, Rachel; Soliman, Amr S; Ruterbusch, Julie; Meza, Rafael; Hirko, Kelly; Graff, John; Schwartz, Kendra

2014-06-01

We calculated cancer incidence for Arab Americans in California; Detroit, Michigan; and New Jersey, and compared rates with non-Hispanic, non-Arab Whites (NHNAWs); Blacks; and Hispanics. We conducted a study using population-based data. We linked new cancers diagnosed in 2000 from the Surveillance, Epidemiology, and End Results Program (SEER) to an Arab surname database. We used standard SEER definitions and methodology for calculating rates. Population estimates were extracted from the 2000 US Census. We calculated incidence and rate ratios. Arab American men and women had similar incidence rates across the 3 geographic regions, and the rates were comparable to NHNAWs. However, the thyroid cancer rate was elevated among Arab American women compared with NHNAWs, Hispanics, and Blacks. For all sites combined, for prostate and lung cancer, Arab American men had a lower incidence than Blacks and higher incidence than Hispanics in all 3 geographic regions. Arab American male bladder cancer incidence was higher than that in Hispanics and Blacks in these regions. Our results suggested that further research would benefit from the federal recognition of Arab Americans as a specified ethnicity to estimate and address the cancer burden in this growing segment of the population.

A New Screening Methodology for Improved Oil Recovery Processes Using Soft-Computing Techniques

Science.gov (United States)

Parada, Claudia; Ertekin, Turgay

2010-05-01

The first stage of production of any oil reservoir involves oil displacement by natural drive mechanisms such as solution gas drive, gas cap drive and gravity drainage. Typically, improved oil recovery (IOR) methods are applied to oil reservoirs that have been depleted naturally. In more recent years, IOR techniques are applied to reservoirs even before their natural energy drive is exhausted by primary depletion. Descriptive screening criteria for IOR methods are used to select the appropriate recovery technique according to the fluid and rock properties. This methodology helps in assessing the most suitable recovery process for field deployment of a candidate reservoir. However, the already published screening guidelines neither provide information about the expected reservoir performance nor suggest a set of project design parameters, which can be used towards the optimization of the process. In this study, artificial neural networks (ANN) are used to build a high-performance neuro-simulation tool for screening different improved oil recovery techniques: miscible injection (CO2 and N2), waterflooding and steam injection processes. The simulation tool consists of proxy models that implement a multilayer cascade feedforward back propagation network algorithm. The tool is intended to narrow the ranges of possible scenarios to be modeled using conventional simulation, reducing the extensive time and energy spent in dynamic reservoir modeling. A commercial reservoir simulator is used to generate the data to train and validate the artificial neural networks. The proxy models are built considering four different well patterns with different well operating conditions as the field design parameters. Different expert systems are developed for each well pattern. The screening networks predict oil production rate and cumulative oil production profiles for a given set of rock and fluid properties, and design parameters. The results of this study show that the networks are

Mass Movement Hazards in the Mediterranean; A review on applied techniques and methodologies

Science.gov (United States)

Ziade, R.; Abdallah, C.; Baghdadi, N.

2012-04-01

Emergent population and expansions of settlements and life-lines over hazardous areas in the Mediterranean region have largely increased the impact of Mass Movements (MM) both in industrialized and developing countries. This trend is expected to continue in the next decades due to increased urbanization and development, continued deforestation and increased regional precipitation in MM-prone areas due to changing climatic patterns. Consequently, and over the past few years, monitoring of MM has acquired great importance from the scientific community as well as the civilian one. This article begins with a discussion of the MM classification, and the different topographic, geologic, hydrologic and environmental impacting factors. The intrinsic (preconditioning) variables determine the susceptibility of MM and extrinsic factors (triggering) can induce the probability of MM occurrence. The evolution of slope instability studies is charted from geodetic or observational techniques, to geotechnical field-based origins to recent higher levels of data acquisition through Remote Sensing (RS) and Geographic Information System (GIS) techniques. Since MM detection and zoning is difficult in remote areas, RS and GIS have enabled regional studies to predominate over site-based ones where they provide multi-temporal images hence facilitate greatly MM monitoring. The unusual extent of the spectrum of MM makes it difficult to define a single methodology to establish MM hazard. Since the probability of occurrence of MM is one of the key components in making rational decisions for management of MM risk, scientists and engineers have developed physical parameters, equations and environmental process models that can be used as assessment tools for management, education, planning and legislative purposes. Assessment of MM is attained through various modeling approaches mainly divided into three main sections: quantitative/Heuristic (1:2.000-1:10.000), semi-quantitative/Statistical (1

Medication incidents reported to an online incident reporting system.

LENUS (Irish Health Repository)

Alrwisan, Adel

2011-01-15

AIMS: Approximately 20% of deaths from adverse events are related to medication incidents, costing the NHS an additional £500 million annually. Less than 5% of adverse events are reported. This study aims to assess the reporting rate of medication incidents in NHS facilities in the north east of Scotland, and to describe the types and outcomes of reported incidents among different services. Furthermore, we wished to quantify the proportion of reported incidents according to the reporters\\' profession. METHODS: A retrospective description was made of medication incidents reported to an online reporting system (DATIX) over a 46-month-period (July 2005 to April 2009). Reports originated from acute and community hospitals, mental health, and primary care facilities. RESULTS: Over the study period there were 2,666 incidents reported with a mean monthly reporting rate of 78.2\\/month (SD±16.9). 6.1% of all incidents resulted in harm, with insulin being the most commonly implicated medication. Nearly three-quarters (74.2%, n=1,978) of total incidents originated from acute hospitals. Administration incidents were implicated in the majority of the reported medication incidents (59%), followed by prescribing (10.8%) and dispensing (9.9%), while the nondescript "other medication incidents" accounted for 20.3% of total incidents. The majority of reports were made by nursing and midwifery staff (80%), with medical and dental professionals reporting the lowest number of incidents (n=56, 2%). CONCLUSIONS: The majority of medication incidents in this study were reported by nursing and midwifery staff, and were due to administration incidents. There is a clear need to elucidate the reasons for the limited contribution of the medical and dental professionals to reporting medication incidents.

Web survey methodology

CERN Document Server

Callegaro, Mario; Vehovar, Asja

2015-01-01

Web Survey Methodology guides the reader through the past fifteen years of research in web survey methodology. It both provides practical guidance on the latest techniques for collecting valid and reliable data and offers a comprehensive overview of research issues. Core topics from preparation to questionnaire design, recruitment testing to analysis and survey software are all covered in a systematic and insightful way. The reader will be exposed to key concepts and key findings in the literature, covering measurement, non-response, adjustments, paradata, and cost issues. The book also discusses the hottest research topics in survey research today, such as internet panels, virtual interviewing, mobile surveys and the integration with passive measurements, e-social sciences, mixed modes and business intelligence. The book is intended for students, practitioners, and researchers in fields such as survey and market research, psychological research, official statistics and customer satisfaction research.

Incidence of Neonatal Hyperphenylalaninemia Based on High-performance Liquid Chromatography Confirmatory Technique in Mazandaran Province, Northern Iran (2007–2015

Directory of Open Access Journals (Sweden)

Ali Abbaskhanian

2017-01-01

Full Text Available Background: Classic phenylketonuria (PKU is a metabolic disorder. The purpose of this study was to assess epidemiological factors of PKU phenotypes in a neonatal screening program for Mazandaran, Iran. Methods: In this descriptive-retrospective study from 2007 to 2015, neonates PKU level was conducted by phenylalanine level based on a biochemical technique by ELISA and then by confirmatory methods high performance liquid chromatography. Results: Of the 407,244 screened newborns (48.7% girls and 51.3% boys, 14 girls and 13 boys were diagnosed definitely from 465 suspicious cases of PKU. The incidence of PKU was 0.66 in 10,000, which was noted in different severity (severe PKU - 1:67,874, mild PKU - 1:45,249, and HPA - 1:33,937. In addition, we did not detect any cases of nonclassic PKU. Conclusions: Although the consanguineous marriage pattern is a major cause of hyperphenylalaninemia (HPA particularly in Iranian, there was no significant difference between groups in this study. Now, screening should be executed for all of the family that they have the familial history of PKU in Iran. According to varies actual of prevalence and incidence rate of PKU reported a real patient and taking PKU with mild PKU and HPA, it is recommended, the will provide the PKU reports based on the severity of the disease.

Incidence of Neonatal Hyperphenylalaninemia Based on High-performance Liquid Chromatography Confirmatory Technique in Mazandaran Province, Northern Iran (2007–2015)

Science.gov (United States)

Abbaskhanian, Ali; Zamanfar, Daniel; Afshar, Parvaneh; Asadpoor, Einollah; Rouhanizadeh, Hamed; Jafarnia, Ali; Shokzadeh, Mohammad

2017-01-01

Background: Classic phenylketonuria (PKU) is a metabolic disorder. The purpose of this study was to assess epidemiological factors of PKU phenotypes in a neonatal screening program for Mazandaran, Iran. Methods: In this descriptive-retrospective study from 2007 to 2015, neonates PKU level was conducted by phenylalanine level based on a biochemical technique by ELISA and then by confirmatory methods high performance liquid chromatography. Results: Of the 407,244 screened newborns (48.7% girls and 51.3% boys), 14 girls and 13 boys were diagnosed definitely from 465 suspicious cases of PKU. The incidence of PKU was 0.66 in 10,000, which was noted in different severity (severe PKU - 1:67,874, mild PKU - 1:45,249, and HPA - 1:33,937). In addition, we did not detect any cases of nonclassic PKU. Conclusions: Although the consanguineous marriage pattern is a major cause of hyperphenylalaninemia (HPA) particularly in Iranian, there was no significant difference between groups in this study. Now, screening should be executed for all of the family that they have the familial history of PKU in Iran. According to varies actual of prevalence and incidence rate of PKU reported a real patient and taking PKU with mild PKU and HPA, it is recommended, the will provide the PKU reports based on the severity of the disease. PMID:29184644

Radioisotope methodology course radioprotection aspects

International Nuclear Information System (INIS)

Bergoc, R.M.; Caro, R.A.; Menossi, C.A.

1996-01-01

The advancement knowledge in molecular and cell biology, biochemistry, medicine and pharmacology, which has taken place during the last 50 years, after World War II finalization, is really outstanding. It can be safely said that this fact is principally due to the application of radioisotope techniques. The research on metabolisms, biodistribution of pharmaceuticals, pharmacodynamics, etc., is mostly carried out by means of techniques employing radioactive materials. Radioisotopes and radiation are frequently used in medicine both as diagnostic and therapeutic tools. The radioimmunoanalysis is today a routine method in endocrinology and in general clinical medicine. The receptor determination and characterization is a steadily growing methodology used in clinical biochemistry, pharmacology and medicine. The use of radiopharmaceuticals and radiation of different origins, for therapeutic purposes, should not be overlooked. For these reasons, the importance to teach radioisotope methodology is steadily growing. This is principally the case for specialization at the post-graduate level but at the pre graduate curriculum it is worthwhile to give some elementary theoretical and practical notions on this subject. These observations are justified by a more than 30 years teaching experience at both levels at the School of Pharmacy and Biochemistry of the University of Buenos Aires, Argentina. In 1960 we began to teach Physics III, an obligatory pregraduate course for biochemistry students, in which some elementary notions of radioactivity and measurement techniques were given. Successive modifications of the biochemistry pregraduate curriculum incorporated radiochemistry as an elective subject and since 1978, radioisotope methodology, as obligatory subject for biochemistry students. This subject is given at the radioisotope laboratory during the first semester of each year and its objective is to provide theoretical and practical knowledge to the biochemistry students, even

A methodological comparison of customer service analysis techniques

Science.gov (United States)

James Absher; Alan Graefe; Robert Burns

2003-01-01

Techniques used to analyze customer service data need to be studied. Two primary analysis protocols, importance-performance analysis (IP) and gap score analysis (GA), are compared in a side-by-side comparison using data from two major customer service research projects. A central concern is what, if any, conclusion might be different due solely to the analysis...

Decision-making methodology for management of hazardous waste

International Nuclear Information System (INIS)

Philbin, J.S.; Cranwell, R.M.

1988-01-01

A decision-making methodology is presented that combines systems and risk analysis techniques to evaluate hazardous waste management practices associated with DOE weapon production operations. The methodology provides a systematic approach to examining waste generation and waste handling practices in addition to the more visible disposal practices. Release-exposure scenarios for hazardous waste operations are identified and operational risk is determined. Comparisons may be made between existing and alternative waste management practices (and processes) on the basis of overall risk, cost and compliance with regulations. Managers can use this methodology to make and defend resource allocation decisions and to prioritize research needs

Adaptation of Agile Project Management Methodology for Project Team

Directory of Open Access Journals (Sweden)

Rasnacis Arturs

2015-12-01

Full Text Available A project management methodology that defines basic processes, tools, techniques, methods, resources and procedures used to manage a project is necessary for effective and successful IT project management. Each company needs to define its own methodology or adapt some of the existing ones. The purpose of the research is to evaluate the possibilities of adapting IT project development methodology according to the company, company employee characteristics and their mutual relations. The adaptation process will be illustrated with a case study at an IT company in Latvia where the developed methodology is based on Agile Scrum, one of the most widespread Agile methods.

Incorporating organizational factors into Probabilistic Risk Assessment (PRA) of complex socio-technical systems: A hybrid technique formalization

International Nuclear Information System (INIS)

Mohaghegh, Zahra; Kazemi, Reza; Mosleh, Ali

2009-01-01

This paper is a result of a research with the primary purpose of extending Probabilistic Risk Assessment (PRA) modeling frameworks to include the effects of organizational factors as the deeper, more fundamental causes of accidents and incidents. There have been significant improvements in the sophistication of quantitative methods of safety and risk assessment, but the progress on techniques most suitable for organizational safety risk frameworks has been limited. The focus of this paper is on the choice of 'representational schemes' and 'techniques.' A methodology for selecting appropriate candidate techniques and their integration in the form of a 'hybrid' approach is proposed. Then an example is given through an integration of System Dynamics (SD), Bayesian Belief Network (BBN), Event Sequence Diagram (ESD), and Fault Tree (FT) in order to demonstrate the feasibility and value of hybrid techniques. The proposed hybrid approach integrates deterministic and probabilistic modeling perspectives, and provides a flexible risk management tool for complex socio-technical systems. An application of the hybrid technique is provided in the aviation safety domain, focusing on airline maintenance systems. The example demonstrates how the hybrid method can be used to analyze the dynamic effects of organizational factors on system risk

Best practices in incident investigation in the chemical process industries with examples from the industry sector and specifically from Nova Chemicals

International Nuclear Information System (INIS)

Morrison, Lisa M.

2004-01-01

This paper will summarize best practices in incident investigation in the chemical process industries and will provide examples from both the industry sector and specifically from NOVA Chemicals. As a sponsor of the Center for Chemical Process Safety (CCPS), an industry technology alliance of the American Institute of Chemical Engineers, NOVA Chemicals participates in a number of working groups to help develop best practices and tools for the chemical process and associated industries in order to advance chemical process safety. A recent project was to develop an update on guidelines for investigating chemical process incidents. A successful incident investigation management system must ensure that all incidents and near misses are reported, that root causes are identified, that recommendations from incident investigations identify appropriate preventive measures, and that these recommendations are resolved in a timely manner. The key elements of an effective management system for incident investigation will be described. Accepted definitions of such terms as near miss, incident, and root cause will be reviewed. An explanation of the types of incident classification systems in use, along with expected levels of follow-up, will be provided. There are several incident investigation methodologies in use today by members of the CCPS; most of these methodologies incorporate the use of several tools. These tools include: timelines, sequence diagrams, causal factor identification, brainstorming, checklists, pre-defined trees, and team-defined logic trees. Developing appropriate recommendations and then ensuring their resolution is the key to prevention of similar events from recurring, along with the sharing of lessons learned from incidents. There are several sources of information on previous incidents and lessons learned available to companies. In addition, many companies in the chemical process industries use their own internal databases to track recommendations from

Incident Wave Climate at the OWC Pico Plant

DEFF Research Database (Denmark)

Le Crom, I.; Cabrera Bermejo, H.; Pecher, Arthur

2011-01-01

The aim of the study is to retrieve the incident wave information that coincides with former Pico plant operation periods. The recent implementation of a directional pressure sensor for wave measurement as well as the recovery of the data gathered by a directional wave rider buoy allowed embarkin...... on the validation of two different models by using both wave measurements: a model for wave propagation (SWAN) and an Artificial Neural Network (ANN). This paper, as a first step of a comprehensive study, leads to several recommendations to improve both methodologies in future works....

Methodology for ranking restoration options

International Nuclear Information System (INIS)

Hedemann Jensen, Per

1999-04-01

The work described in this report has been performed as a part of the RESTRAT Project FI4P-CT95-0021a (PL 950128) co-funded by the Nuclear Fission Safety Programme of the European Commission. The RESTRAT project has the overall objective of developing generic methodologies for ranking restoration techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps: characterisation of relevant contaminated sites; identification and characterisation of relevant restoration techniques; assessment of the radiological impact; development and application of a selection methodology for restoration options; formulation of generic conclusions and development of a manual. The project is intended to apply to situations in which sites with nuclear installations have been contaminated with radioactive materials as a result of the operation of these installations. The areas considered for remedial measures include contaminated land areas, rivers and sediments in rivers, lakes, and sea areas. Five contaminated European sites have been studied. Various remedial measures have been envisaged with respect to the optimisation of the protection of the populations being exposed to the radionuclides at the sites. Cost-benefit analysis and multi-attribute utility analysis have been applied for optimisation. Health, economic and social attributes have been included and weighting factors for the different attributes have been determined by the use of scaling constants. (au)

Use of Mitomycin C to reduce the incidence of encapsulated cysts following ahmed glaucoma valve implantation in refractory glaucoma patients: a new technique.

Science.gov (United States)

Zhou, Minwen; Wang, Wei; Huang, Wenbin; Zhang, Xiulan

2014-09-06

To evaluate the surgical outcome of Ahmed glaucoma valve (AGV) implantation with a new technique of mitomycin C (MMC) application. This is a retrospective study. All patients with refractory glaucoma underwent FP-7 AGV implantation. Two methods of MMC application were used. In the traditional technique, 6 × 4 mm cotton soaked with MMC (0.25-0.33 mg/ml) was placed in the implantation area for 2-5mins; in the new technique, the valve plate first was encompassed with a thin layer of cotton soaked with MMC, then inserted into the same area. A 200 ml balanced salt solution was applied for irrigation of MMC. The surgical success rate, intraocular pressure (IOP), number of anti-glaucoma medications used, and postoperative complications were analyzed between the groups. The surgical outcomes of two MMC applied techniques were compared. The new technique group had only one case (2.6%) of encapsulated cyst formation out of 38 eyes, while there were eight (19.5%) cases out of 41 eyes the in traditional group. The difference was statistically significant (P = 0.030). According to the definition of success rate, there was 89.5% in the new technique group and 70.7% in the traditional group at the follow-up end point. There was a significant difference between the two groups (P = 0.035). Mean IOP in the new technique group were significantly lower than those of the traditional group at 3 and 6 months (P < 0.05). By using a thin layer of cotton soaked with MMC to encompass the valve plate, the new MMC application technique could greatly decrease the incidence of encapsulated cyst and increase the success rate following AGV implantation.

DEMATEL Technique: A Systematic Review of the State-of-the-Art Literature on Methodologies and Applications

Directory of Open Access Journals (Sweden)

Sheng-Li Si

2018-01-01

Full Text Available Decision making trial and evaluation laboratory (DEMATEL is considered as an effective method for the identification of cause-effect chain components of a complex system. It deals with evaluating interdependent relationships among factors and finding the critical ones through a visual structural model. Over the recent decade, a large number of studies have been done on the application of DEMATEL and many different variants have been put forward in the literature. The objective of this study is to review systematically the methodologies and applications of the DEMATEL technique. We reviewed a total of 346 papers published from 2006 to 2016 in the international journals. According to the approaches used, these publications are grouped into five categories: classical DEMATEL, fuzzy DEMATEL, grey DEMATEL, analytical network process- (ANP- DEMATEL, and other DEMATEL. All papers with respect to each category are summarized and analyzed, pointing out their implementing procedures, real applications, and crucial findings. This systematic and comprehensive review holds valuable insights for researchers and practitioners into using the DEMATEL in terms of indicating current research trends and potential directions for further research.

Economic impact profiling of CBRN events: focusing on biological incidents.

Science.gov (United States)

Cavallini, Simona; Bisogni, Fabio; Mastroianni, Marco

2014-12-01

Chemical, biological, radiological and nuclear (CBRN) incidents, both caused accidentally by human error or natural/technological events and determined intentionally as criminal/malicious/terroristic acts, have consequences that could be differently characterized. In the last years many efforts to analyze the economic impact of terrorist threat have been carried out, while researches specifically concerning CBRN events have not been extensively undertaken. This paper in particular aims at proposing a methodological approach for studying macro-level economic impact profiles of biological incidents caused by weaponized and non-weaponized materials. The suggested approach investigates the economic consequences of biological incidents according to two main dimensions: type of large-scale effect and persistence of effect. Biological incident economic impacts are analyzed taking into account the persistence of effect during time as short-term impact (i.e. immediately after the incident), medium-term impact (i.e. by a month) and long-term impact (i.e. by years). The costs due to preventive countermeasure against biological threats (e.g. prevention, protection and preparedness expenses) are not taken into account. To this purpose, information on the key features of past biological incidents can be used as case studies to try to build impact profiles taking into account the proposed two main dimensions. Consequence management and effect mitigation of CBRN emergencies and disasters may benefit from an ex ante definition of the impact profiling related to this kind of incidents. The final goal of this paper is to define an approach to organize information on possible biological events according to their impact profile for supporting more effective and efficient first responders' prompt actions and policy makers' strategic decisions after the event occurrence.

Incidence rates and trends of hip/femur fractures in five European countries

DEFF Research Database (Denmark)

Requena, G; Abbing-Karahagopian, V; Huerta, C

2014-01-01

Hip fractures represent a major public health challenge worldwide. Multinational studies using a common methodology are scarce. We aimed to estimate the incidence rates (IRs) and trends of hip/femur fractures over the period 2003-2009 in five European countries. The study was performed using seven......, P European countries. With the exception of Denmark, no decreasing trend was observed over the study period....

Surface quality inspection of PbWO4 crystals by grazing incidence X-ray diffraction

International Nuclear Information System (INIS)

Mengucci, P.; Di Cristoforo, A.; Lebeau, M.; Majni, G.; Paone, N.; Pietroni, P.; Rinaldi, D.

2005-01-01

High-quality scintillating crystals are required for applications in radiographic systems and high-energy physics detectors to achieve the specified optical properties. In order to study the state of the single crystals surface we propose the use of the grazing incidence X-ray diffraction (GID) technique. This technique allows performing a depth profiling of the sample by changing the incidence angle of the X-ray beam with respect to the sample surface. In this work, two samples of a large PbWO 4 (PWO) single crystal exhibiting different surface roughness values have been studied. Results have shown that GID is a suitable technique for surface quality inspection

[Regional Study of Patient Safety Incidents (ERIDA) in the Emergency Services].

Science.gov (United States)

Alcaraz-Martínez, J; Aranaz-Andrés, J M; Martínez-Ros, C; Moreno-Reina, S; Escobar-Álvaro, L; Ortega-Liarte, J V

2016-01-01

Evaluate the patient safety incidents that occur in the emergency departments of our region. Observational study conducted in all the hospital emergency departments in the Regional Health Service of Murcia. After systematic random sampling, data were collected during care and a week later by telephone survey. Health professionals of each service were trained and collected the information, following the methodology of the National Study of Adverse Events Related to Hospitalization -ENEAS- and the Adverse Events Related to Spanish Hospital Emergency Department Care -EVADUR-. A total of 393 samples were collected, proportional to the cases treated in each hospital. In 10 cases (3.1%) the complaint was a previous safety incident. At least one incident was detected in 47 patients (11.95%; 8.7 to 15.1%). In 3 cases there were 2 incidents, bringing the number of incidents to 50. Regarding the impact, the 51% of incidents caused harm to the patients. The effects more frequent in patients were the need for repeat visits (9 cases), and mismanagement of pain (8 cases). In 24 cases (51.1%) health care was not affected, although 3 cases required an additional test, 11 cases required further consultation, and led to hospitalisation in 2 cases. The most frequent causal factors of these incidents were medication (14) and care (12). The incidents were considered preventable in 60% of cases. A rate of incidents in the emergency departments, representative of the region, has been obtained. The implications of the results for the population means that 12 out of every 100 patients treated in emergency departments have an adverse event, and 7 of these are avoidable. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

Discrimination and quantification of implanted solar wind in Genesis collector shards using grazing incidence synchrotron x-ray techniques: New detector initial results

International Nuclear Information System (INIS)

Kitts, K.; Choi, Y.; Sutton, S.R.; Ghose, S.; Burnett, D.; Eng, P.

2008-01-01

Accurate knowledge of the composition of the Sun provides a baseline, which allows an understanding of how the solar system has evolved over time and how solar processes and solar wind mechanics behave. Unfortunately, the errors in photospheric abundances are too large for many planetary science problems and this hampers our understanding of these different processes. Analyses of solar wind implanted in meteorites or lunar soils have provided more precise data [e.g. 1 and references therein] but the extent to which alteration processes on these bodies complicate such information is only now being determined. Therefore, in order to obtain pristine solar wind samples, NASA developed and launched the Genesis Discovery Mission. Unfortunately, the probe crash-landed shattering the 300 collector plates into 15,000+ pieces complicating the analysis and necessitating the development of new analytical techniques and equipment. Thus, shards from the Genesis collector array and their appropriate flight spares are currently being characterized via grazing-incidence synchrotron x-ray techniques at the Advanced Photon Source at Argonne National Laboratory. The goals are (1) determine solar wind fluences of the elements Ca-Ge by grazing-incidence angle-resolved x-ray fluorescence (XRF) and x-ray reflectivity, (2) improve data reduction via the development of XRF spectral deconvolution routines and develop modeling algorithms for reflectivity and fluorescence yield analysis in order to determine element specific depth profiles from which absolute concentration may be extracted and (3) designing and developing a new multi-element silicon multi-channel (SMCD) detector system. These improvements will increase our sensitivity by a factor of three or more, reduce measurement time at a given sensitivity to one-eighth and the minimum detection limit would be reduced by a factor of 3 to ∼3 x 10 8 atoms/cm 2 .

Using remote sensing and modeling techniques to investigate the annual parasite incidence of malaria in Loreto, Peru

Science.gov (United States)

Mousam, Aneela; Maggioni, Viviana; Delamater, Paul L.; Quispe, Antonio M.

2017-10-01

Between 2001 and 2010 significant progress was made towards reducing the number of malaria cases in Peru; however, the country saw an increase between 2011 and 2015. This work attempts to uncover the associations among various climatic and environmental variables and the annual malaria parasite incidence in the Peruvian region of Loreto. A Multilevel Mixed-effects Poisson Regression model is employed, focusing on the 2009-2013 period, when trends in malaria incidence shifted from decreasing to increasing. The results indicate that variations in elevation (β = 0.78; 95% confidence interval (CI), 0.75-0.81), soil moisture (β = 0.0021; 95% CI, 0.0019-0.0022), rainfall (β = 0.59; 95% CI, 0.56-0.61), and normalized difference vegetation index (β = 2.13; 95% CI, 1.83-2.43) is associated with higher annual parasite incidence, whereas an increase in temperature (β = -0.0043; 95% CI, - 0.0044- 0.0041) is associated with a lower annual parasite incidence. The results from this study are particularly useful for healthcare workers in Loreto and have the potential of being integrated within malaria elimination plans.

Selection of skin dose calculation methodologies

International Nuclear Information System (INIS)

Farrell, W.E.

1987-01-01

This paper reports that good health physics practice dictates that a dose assessment be performed for any significant skin contamination incident. There are, however, several methodologies that could be used, and while there is probably o single methodology that is proper for all cases of skin contamination, some are clearly more appropriate than others. This can be demonstrated by examining two of the more distinctly different options available for estimating skin dose the calculational methods. The methods compiled by Healy require separate beta and gamma calculations. The beta calculational method is the derived by Loevinger, while the gamma dose is calculated from the equation for dose rate from an infinite plane source with an absorber between the source and the detector. Healy has provided these formulas in graphical form to facilitate rapid dose rate determinations at density thicknesses of 7 and 20 mg/cm 2 . These density thicknesses equate to the regulatory definition of the sensitive layer of the skin and a more arbitrary value to account of beta absorption in contaminated clothing

Development of a methodology for safety classification on a non-reactor nuclear facility illustrated using an specific example

International Nuclear Information System (INIS)

Scheuermann, F.; Lehradt, O.; Traichel, A.

2015-01-01

To realize the safety of personnel and environment systems and components of nuclear facilities are classified according to their potential danger into safety classes. Based on this classification different demands on the manufacturing quality result. The objective of this work is to present the standardized method developed by NUKEM Technologies Engineering Services for the categorization into the safety classes restricted to Non-reactor nuclear facilities (NRNF). Exemplary the methodology is used on the complex Russian normative system (four safety classes). For NRNF only the lower two safety classes are relevant. The classification into the lowest safety class 4 is accordingly if the maximum resulting dose following from clean-up actions in case of incidents/accidents remains below 20 mSv and the volume activity restrictions of set in NRB-99/2009 are met. The methodology is illustrated using an example. In short the methodology consists of: - Determination of the working time to remove consequences of incidents, - Calculation of the dose resulting from direct radiation and due to inhalation during these works. The application of this methodology avoids over-conservative approaches. As a result some previously higher classified equipment can be classified into the lower safety class.

Three-dimensional RAMA fluence methodology benchmarking

International Nuclear Information System (INIS)

Baker, S. P.; Carter, R. G.; Watkins, K. E.; Jones, D. B.

2004-01-01

This paper describes the benchmarking of the RAMA Fluence Methodology software, that has been performed in accordance with U. S. Nuclear Regulatory Commission Regulatory Guide 1.190. The RAMA Fluence Methodology has been developed by TransWare Enterprises Inc. through funding provided by the Electric Power Research Inst., Inc. (EPRI) and the Boiling Water Reactor Vessel and Internals Project (BWRVIP). The purpose of the software is to provide an accurate method for calculating neutron fluence in BWR pressure vessels and internal components. The Methodology incorporates a three-dimensional deterministic transport solution with flexible arbitrary geometry representation of reactor system components, previously available only with Monte Carlo solution techniques. Benchmarking was performed on measurements obtained from three standard benchmark problems which include the Pool Criticality Assembly (PCA), VENUS-3, and H. B. Robinson Unit 2 benchmarks, and on flux wire measurements obtained from two BWR nuclear plants. The calculated to measured (C/M) ratios range from 0.93 to 1.04 demonstrating the accuracy of the RAMA Fluence Methodology in predicting neutron flux, fluence, and dosimetry activation. (authors)

Quality of the Critical Incident Technique in practice: Interrater reliability and users' acceptance under real conditions

Directory of Open Access Journals (Sweden)

ANNA KOCH

2009-03-01

Full Text Available The Critical Incident Technique (CIT is a widely used task analysis method in personnel psychology. While studies on psychometric properties of the CIT so far primarily took into account relevance ratings of task-lists or attributes, and hence, only a smaller or adapted part of the CIT, little is known about the psychometric properties of the complete CIT in its most meaningful and fruitful way. Therefore, the aim of the present study was to assess interrater reliability and the participants’ view of the CIT under real conditions and especially to provide data for the key step of the CIT: the classification of behavior descriptions into requirements. Additionally, the cost-benefit-ratio and practicability were rated from the participants’ views as an important indicator for the acceptance of the task analysis approach in practice. Instructors of German Institutions for Statutory Accidents Insurance and Prevention as well as their supervisors took part in a job analysis with the CIT. Moderate interrater reliability for the relevance rating was found while the classification step yielded unexpectedly low coefficients for interrater reliability. The cost-benefit-ratio and practicability of the complete CIT were rated very positive. The results are discussed in relation to determinants that facilitate or impede the application of task analysis procedures.

A Global Sensitivity Analysis Methodology for Multi-physics Applications

Energy Technology Data Exchange (ETDEWEB)

Tong, C H; Graziani, F R

2007-02-02

Experiments are conducted to draw inferences about an entire ensemble based on a selected number of observations. This applies to both physical experiments as well as computer experiments, the latter of which are performed by running the simulation models at different input configurations and analyzing the output responses. Computer experiments are instrumental in enabling model analyses such as uncertainty quantification and sensitivity analysis. This report focuses on a global sensitivity analysis methodology that relies on a divide-and-conquer strategy and uses intelligent computer experiments. The objective is to assess qualitatively and/or quantitatively how the variabilities of simulation output responses can be accounted for by input variabilities. We address global sensitivity analysis in three aspects: methodology, sampling/analysis strategies, and an implementation framework. The methodology consists of three major steps: (1) construct credible input ranges; (2) perform a parameter screening study; and (3) perform a quantitative sensitivity analysis on a reduced set of parameters. Once identified, research effort should be directed to the most sensitive parameters to reduce their uncertainty bounds. This process is repeated with tightened uncertainty bounds for the sensitive parameters until the output uncertainties become acceptable. To accommodate the needs of multi-physics application, this methodology should be recursively applied to individual physics modules. The methodology is also distinguished by an efficient technique for computing parameter interactions. Details for each step will be given using simple examples. Numerical results on large scale multi-physics applications will be available in another report. Computational techniques targeted for this methodology have been implemented in a software package called PSUADE.

An Integrated Methodology for Emulsified Formulated Product Design

DEFF Research Database (Denmark)

Mattei, Michele

are mixed together to determine the desired emulsified product. They are still mainly designed and analysed through trial - and - error based exper- imental techniques, therefore a systematic approach , integrating model-based as well a s experiment - based techniques, for design of these products could......The consumer oriented chemical based products are used every day by millions of people. They are structured products constituted of numerous chemicals, and many of them, especially household and personal care products, are emulsions where active ingredients, solvents, additives and surfactants...... significantly reduce both time and cost connected to product development by doing only the necessary experi- ments , and ensuring chances for innovation . The main contribution of this project i s the development of an integrated methodology for the design of emulsified formulated products. The methodology...

Explaining and predicting workplace accidents using data-mining techniques

International Nuclear Information System (INIS)

Rivas, T.; Paz, M.; Martin, J.E.; Matias, J.M.; Garcia, J.F.; Taboada, J.

2011-01-01

Current research into workplace risk is mainly conducted using conventional descriptive statistics, which, however, fail to properly identify cause-effect relationships and are unable to construct models that could predict accidents. The authors of the present study modelled incidents and accidents in two companies in the mining and construction sectors in order to identify the most important causes of accidents and develop predictive models. Data-mining techniques (decision rules, Bayesian networks, support vector machines and classification trees) were used to model accident and incident data compiled from the mining and construction sectors and obtained in interviews conducted soon after an incident/accident occurred. The results were compared with those for a classical statistical techniques (logistic regression), revealing the superiority of decision rules, classification trees and Bayesian networks in predicting and identifying the factors underlying accidents/incidents.

Explaining and predicting workplace accidents using data-mining techniques

Energy Technology Data Exchange (ETDEWEB)

Rivas, T., E-mail: trivas@uvigo.e [Dpto. Ingenieria de los Recursos Naturales y Medio Ambiente, E.T.S.I. Minas, University of Vigo, Campus Lagoas, 36310 Vigo (Spain); Paz, M., E-mail: mpaz.minas@gmail.co [Dpto. Ingenieria de los Recursos Naturales y Medio Ambiente, E.T.S.I. Minas, University of Vigo, Campus Lagoas, 36310 Vigo (Spain); Martin, J.E., E-mail: jmartin@cippinternacional.co [CIPP International, S.L. Parque Tecnologico de Asturias, Parcela 43, Oficina 11, 33428 Llanera (Spain); Matias, J.M., E-mail: jmmatias@uvigo.e [Dpto. Estadistica e Investigacion Operativa, E.T.S.I. Minas, University of Vigo, Campus Lagoas, 36310 Vigo (Spain); Garcia, J.F., E-mail: jgarcia@cippinternacional.co [CIPP International, S.L. Parque Tecnologico de Asturias, Parcela 43, Oficina 11, 33428 Llanera (Spain); Taboada, J., E-mail: jtaboada@uvigo.e [Dpto. Ingenieria de los Recursos Naturales y Medio Ambiente, E.T.S.I. Minas, University of Vigo, Campus Lagoas, 36310 Vigo (Spain)

2011-07-15

Current research into workplace risk is mainly conducted using conventional descriptive statistics, which, however, fail to properly identify cause-effect relationships and are unable to construct models that could predict accidents. The authors of the present study modelled incidents and accidents in two companies in the mining and construction sectors in order to identify the most important causes of accidents and develop predictive models. Data-mining techniques (decision rules, Bayesian networks, support vector machines and classification trees) were used to model accident and incident data compiled from the mining and construction sectors and obtained in interviews conducted soon after an incident/accident occurred. The results were compared with those for a classical statistical techniques (logistic regression), revealing the superiority of decision rules, classification trees and Bayesian networks in predicting and identifying the factors underlying accidents/incidents.

Assessment of heterogeneous geological environment using geostatistical techniques

International Nuclear Information System (INIS)

Toida, Masaru; Suyama, Yasuhiro; Shiogama, Yukihiro; Atsumi, Hiroyuki; Abe, Yasunori; Furuichi, Mitsuaki

2003-02-01

'Geoscientific' research at Tono are developing site investigation and assessment techniques in geological environment. One of their important themes is to establish rational methodology to reduce uncertainties associated with the understanding of geological environment, which often exhibits significant heterogeneity. Purpose of this study is to identify and evaluate uncertainties associated with the understanding of geological environment. Because it is useful to guide designing effective site investigation techniques to reduce the uncertainty. For this, a methodology of the uncertainty analysis concerning the heterogeneous geological environment has been developed. In this report the methodology has also been tested through an exercise attempted in Tono area to demonstrate its applicability. This report summarizes as follows: 1) The exercise shows that the methodology considered 'variability' and 'ignorance' can demonstrate its applicability at three-dimensional case. 2) The exercise shows that the methodology can identity and evaluate uncertainties concerning ground water flow associated with performance assessment. 3) Based on sensitivity analyses, it is possible for the methodology to support designs of the following stage investigations to reduce the uncertainties efficiently. (author)

Estimating the global incidence of traumatic spinal cord injury.

Science.gov (United States)

Fitzharris, M; Cripps, R A; Lee, B B

2014-02-01

Population modelling--forecasting. To estimate the global incidence of traumatic spinal cord injury (TSCI). An initiative of the International Spinal Cord Society (ISCoS) Prevention Committee. Regression techniques were used to derive regional and global estimates of TSCI incidence. Using the findings of 31 published studies, a regression model was fitted using a known number of TSCI cases as the dependent variable and the population at risk as the single independent variable. In the process of deriving TSCI incidence, an alternative TSCI model was specified in an attempt to arrive at an optimal way of estimating the global incidence of TSCI. The global incidence of TSCI was estimated to be 23 cases per 1,000,000 persons in 2007 (179,312 cases per annum). World Health Organization's regional results are provided. Understanding the incidence of TSCI is important for health service planning and for the determination of injury prevention priorities. In the absence of high-quality epidemiological studies of TSCI in each country, the estimation of TSCI obtained through population modelling can be used to overcome known deficits in global spinal cord injury (SCI) data. The incidence of TSCI is context specific, and an alternative regression model demonstrated how TSCI incidence estimates could be improved with additional data. The results highlight the need for data standardisation and comprehensive reporting of national level TSCI data. A step-wise approach from the collation of conventional epidemiological data through to population modelling is suggested.

Diuresis renography in children: methodological aspects

International Nuclear Information System (INIS)

Bonnin, F.; Le Stanc, E.; Busquet, G.; Saidi, L.; Lyonnet, F.

1995-01-01

In paediatrics, diuresis renography is used as a method to guide clinical management of hydronephrosis or hydro-uretero-nephrosis. Various pitfalls in the technique and other errors exist and may lead to a misinterpretation of the test. The methodology for performing and interpreting the diuresis renography is discussed. (authors). 12 refs., 4 figs

A Modeling methodology for NoSQL Key-Value databases

Directory of Open Access Journals (Sweden)

Gerardo ROSSEL

2017-08-01

Full Text Available In recent years, there has been an increasing interest in the field of non-relational databases. However, far too little attention has been paid to design methodology. Key-value data stores are an important component of a class of non-relational technologies that are grouped under the name of NoSQL databases. The aim of this paper is to propose a design methodology for this type of database that allows overcoming the limitations of the traditional techniques. The proposed methodology leads to a clean design that also allows for better data management and consistency.

VIII. THE PAST, PRESENT, AND FUTURE OF DEVELOPMENTAL METHODOLOGY.

Science.gov (United States)

Little, Todd D; Wang, Eugene W; Gorrall, Britt K

2017-06-01

This chapter selectively reviews the evolution of quantitative practices in the field of developmental methodology. The chapter begins with an overview of the past in developmental methodology, discussing the implementation and dissemination of latent variable modeling and, in particular, longitudinal structural equation modeling. It then turns to the present state of developmental methodology, highlighting current methodological advances in the field. Additionally, this section summarizes ample quantitative resources, ranging from key quantitative methods journal articles to the various quantitative methods training programs and institutes. The chapter concludes with the future of developmental methodology and puts forth seven future innovations in the field. The innovations discussed span the topics of measurement, modeling, temporal design, and planned missing data designs. Lastly, the chapter closes with a brief overview of advanced modeling techniques such as continuous time models, state space models, and the application of Bayesian estimation in the field of developmental methodology. © 2017 The Society for Research in Child Development, Inc.

Incidence of severe anorexia nervosa in Switzerland : 40 years of development (vol 35, pg 250, 2004)

NARCIS (Netherlands)

Milos, G; Spindler, A; Schnyder, U; Martz, J; Hoek, HW; Willi, J

Objective: The current study examined the development of the incidence of severe anorexia nervosa with five sampling periods covering the years 1956-1995 in a geographically defined region of Switzerland. Method: Applying the same methodology as in the earlier sampling periods, the medical records

Annual incidence of snake bite in rural bangladesh.

Directory of Open Access Journals (Sweden)

Ridwanur Rahman

Full Text Available BACKGROUND: Snake bite is a neglected public health problem in the world and one of the major causes of mortality and morbidity in many areas, particularly in the rural tropics. It also poses substantial economic burdens on the snake bite victims due to treatment related expenditure and loss of productivity. An accurate estimate of the risk of snake bite is largely unknown for most countries in the developing world, especially South-East Asia. METHODOLOGY/PRINCIPAL FINDINGS: We undertook a national epidemiological survey to determine the annual incidence density of snake bite among the rural Bangladeshi population. Information on frequency of snake bite and individuals' length of stay in selected households over the preceding twelve months was rigorously collected from the respondents through an interviewer administered questionnaire. Point estimates and confidence intervals of the incidence density of snake bite, weighted and adjusted for the multi-stage cluster sampling design, were obtained. Out of 18,857 study participants, over one year a total of 98 snake bites, including one death were reported in rural Bangladesh. The estimated incidence density of snake bite is 623.4/100,000 person years (95% C I 513.4-789.2/100,000 person years. Biting occurs mostly when individuals are at work. The majority of the victims (71% receive snake bites to their lower extremities. Eighty-six percent of the victims received some form of management within two hours of snake bite, although only three percent of the victims went directly to either a medical doctor or a hospital. CONCLUSIONS/SIGNIFICANCE: Incidence density of snake bite in rural Bangladesh is substantially higher than previously estimated. This is likely due to better ascertainment of the incidence through a population based survey. Poor access to health services increases snake bite related morbidity and mortality; therefore, effective public health actions are warranted.

Factors influencing recovery and restoration following a chemical incident.

Science.gov (United States)

Peña-Fernández, A; Wyke, S; Brooke, N; Duarte-Davidson, R

2014-11-01

Chemicals are an important part of our society. A wide range of chemicals are discharged into the environment every day from residential, commercial and industrial sources. Many of these discharges do not pose a threat to public health or the environment. However, global events have shown that chemical incidents or accidents can have severe consequences on human health, the environment and society. It is important that appropriate tools and technical guidance are available to ensure that a robust and efficient approach to developing a remediation strategy is adopted. The purpose of remediation is to protect human health from future exposure and to return the affected area back to normal as soon as possible. There are a range of recovery options (techniques or methods for remediation) that are applicable to a broad range of chemicals and incidents. Recovery options should be evaluated according to their appropriateness and efficacy for removing contaminants from the environment; however economic drivers and social and political considerations often influence decision makers on which remedial actions are implemented during the recovery phase of a chemical incident. To date, there is limited information in the literature on remediation strategies and recovery options that have been implemented following a chemical incident, or how successful they have been. Additional factors that can affect the approach taken for recovery are not well assessed or understood by decision makers involved in the remediation and restoration of the environment following a chemical incident. The identification of this gap has led to the development of the UK Recovery Handbook for Chemical Incidents to provide a framework for choosing an effective recovery strategy. A compendium of practical evidence-based recovery options (techniques or methods for remediation) for inhabited areas, food production systems and water environments has also been developed and is included in the chemical

A design methodology for unattended monitoring systems

International Nuclear Information System (INIS)

SMITH, JAMES D.; DELAND, SHARON M.

2000-01-01

The authors presented a high-level methodology for the design of unattended monitoring systems, focusing on a system to detect diversion of nuclear materials from a storage facility. The methodology is composed of seven, interrelated analyses: Facility Analysis, Vulnerability Analysis, Threat Assessment, Scenario Assessment, Design Analysis, Conceptual Design, and Performance Assessment. The design of the monitoring system is iteratively improved until it meets a set of pre-established performance criteria. The methodology presented here is based on other, well-established system analysis methodologies and hence they believe it can be adapted to other verification or compliance applications. In order to make this approach more generic, however, there needs to be more work on techniques for establishing evaluation criteria and associated performance metrics. They found that defining general-purpose evaluation criteria for verifying compliance with international agreements was a significant undertaking in itself. They finally focused on diversion of nuclear material in order to simplify the problem so that they could work out an overall approach for the design methodology. However, general guidelines for the development of evaluation criteria are critical for a general-purpose methodology. A poor choice in evaluation criteria could result in a monitoring system design that solves the wrong problem

LWR design decision methodology. Phase III. Final report

International Nuclear Information System (INIS)

Bertucio, R.; Held, J.; Lainoff, S.; Leahy, T.; Prather, W.; Rees, D.; Young, J.

1982-01-01

Traditionally, management decisions regarding design options have been made using quantitative cost information and qualitative safety information. A Design Decision Methodology, which utilizes probabilistic risk assessment techniques, including event trees and fault trees, along with systems engineering and standard cost estimation methods, has been developed so that a quantitative safety measure may be obtained as well. The report documents the development of this Design Decision Methodology, a demonstration of the methodology on a current licensing issue with the cooperation of the Washington Public Power Supply System (WPPSS), and a discussion of how the results of the demonstration may be used addressing the various issues associated with a licensing position on the issue

The incidence of breast cancer following mantle field radiation therapy as a function of dose and technique

International Nuclear Information System (INIS)

Tinger, Alfred; Wasserman, Todd H.; Klein, Eric E.; Miller, Elizabeth A.; Roberts, Tracy; Piephoff, James V.; Kucik, Nancy A.

1997-01-01

Purpose: There is an increased incidence of breast cancer following mantle field radiation therapy for Hodgkin's disease (HD). We reviewed the experience at the Mallinckrodt Institute of Radiology (MIR) for radiation factors related to the development of breast cancer after mantle field radiation therapy for HD. Methods: The radiation therapy records of 152 women treated with mantle field irradiation for HD at MIR between 1966-1985 were reviewed for the development of breast cancer and treatment-related factors. All patients had a minimum of 5 years of follow-up. The treatment era (1966-1974 vs. 1975-1985), stage of HD, mediastinal dose, axillary dose, maximum dose from the anterior field (anterior d max dose), the anterior-posterior:posterior-anterior (AP:PA) ratio, age at the time of treatment, length of follow-up, and history of splenectomy were analyzed as possible contributing factors for the development of breast cancer. The observed number of breast cancers was compared to the expected number based on age-adjusted incidences from the Connecticut Tumor Registry. Results: Ten breast cancers occurred in the population. Eight involved an upper outer quadrant. In a multivariate analysis, the development of breast cancer was significantly associated with axillary dose. Patients in the early treatment era were at an increased risk for the development of breast cancer due to high anterior d max and breast doses from weighting the fields anteriorly on a low energy linear accelerator. The use of current radiation therapy techniques was not related to an increased risk of breast cancer with a median follow-up of 13 years. Conclusions: A high dose to the axilla and the anterior d max point is significantly associated with the development of breast cancer after mantle field irradiation for HD. Efforts to protect the breast from high doses will likely lessen the increased risk of breast cancer in women treated with radiation therapy for HD

UV-Vis reflection spectroscopy under variable angle incidence at the air-liquid interface.

Science.gov (United States)

Roldán-Carmona, Cristina; Rubia-Payá, Carlos; Pérez-Morales, Marta; Martín-Romero, María T; Giner-Casares, Juan J; Camacho, Luis

2014-03-07

The UV-Vis reflection spectroscopy (UV-Vis-RS) in situ at the air-liquid interface provides information about tilt and aggregation of chromophores in Langmuir monolayers. This information is particularly important given in most cases the chromophore is located at the polar region of the Langmuir monolayer. This region of the Langmuir monolayers has been hardly accessible by other experimental techniques. In spite of its enormous potential, the application of UV-Vis-RS has been limited mainly to reflection measurements under light normal incidence or at lower incidence angles than the Brewster angle. Remarkably, this technique is quite sensitive to the tilt of the chromophores at values of incidence angles close to or larger than the Brewster angle. Therefore, a novel method to obtain the order parameter of the chromophores at the air-liquid interface by using s- and p-polarized radiation at different incidence angles is proposed. This method allowed for the first time the experimental observation of the two components with different polarization properties of a single UV-Vis band at the air-liquid interface. The method of UV-Vis spectroscopy under variable angle incidence is presented as a new tool for obtaining rich detailed information on Langmuir monolayers.

Priority research directions in the area of qualitative methodology

OpenAIRE

Melnikova, Olga; Khoroshilov, Dmitry

2010-01-01

The basic directions of modern theoretical and practical research in the area of qualitative methodology in Russia are discussed in the article. The complexity of research is considered from three points of view: the development of methodology of qualitative analysis, qualitative methods, and verbal and nonverbal projective techniques. The authors present an integrative model of the qualitative analysis, the research on specificity of the use of discourse-analysis method and projective techni...

A Clustering Methodology of Web Log Data for Learning Management Systems

Science.gov (United States)

Valsamidis, Stavros; Kontogiannis, Sotirios; Kazanidis, Ioannis; Theodosiou, Theodosios; Karakos, Alexandros

2012-01-01

Learning Management Systems (LMS) collect large amounts of data. Data mining techniques can be applied to analyse their web data log files. The instructors may use this data for assessing and measuring their courses. In this respect, we have proposed a methodology for analysing LMS courses and students' activity. This methodology uses a Markov…

Critical incidents and near misses during anesthesia: A prospective audit

Directory of Open Access Journals (Sweden)

Pamela Onorame Agbamu

2017-01-01

Full Text Available Background: A critical incident is any preventable mishap associated with the administration of anesthesia and which leads to or could have led to an undesirable patients' outcome. Patients' safety can be improved by learning from reported critical incidents and near misses. Materials and Methods: All perioperative critical incidents (excluding obstetrics occurring over 5 months were voluntarily documented in a pro forma. Age of patient, urgency of surgery, grade of anesthetist, and patients' outcome was noted. Results: Seventy-three critical incidents were recorded in 42 patients (incidence 6.1% of 1188 procedures with complete recovery in 88.1% (n = 37 and mortality in 11.9% (n = 5. The highest incidents occurred during elective procedures (71.4%, which were all supervised by consultants, and in patients aged 0–10 years (40.1%. Critical incident categories documented were cardiovascular (41.1%, respiratory (23.25%, vascular access (15.1%, airway/intubation (6.85%, equipment errors (6.85%, difficult/failed regional technique (4.11%, and others (2.74%. The monitors available were: pulse oximetry (100%, precordial stethoscope (90.5%, sphygmomanometer (90.5%, capnography (54.8%, electrocardiogram (31%, and temperature (14.3%. The most probable cause of critical incident was patient factor (38.7% followed by human error (22.5%. Equipment error, pharmacological factor, and surgical factor accounted for 12.9%. Conclusion: Critical incidents can occur in the hands of the highly skilled and even in the presence of adequate monitoring. Protocols should be put in place to avoid errors. Critical incident reporting must be encouraged to improve patients' safety and reduce morbidity and mortality.

Incorporating organizational factors into Probabilistic Risk Assessment (PRA) of complex socio-technical systems: A hybrid technique formalization

Energy Technology Data Exchange (ETDEWEB)

Mohaghegh, Zahra [Center for Risk and Reliability, University of Maryland, College Park, MD 20742 (United States)], E-mail: mohagheg@umd.edu; Kazemi, Reza; Mosleh, Ali [Center for Risk and Reliability, University of Maryland, College Park, MD 20742 (United States)

2009-05-15

This paper is a result of a research with the primary purpose of extending Probabilistic Risk Assessment (PRA) modeling frameworks to include the effects of organizational factors as the deeper, more fundamental causes of accidents and incidents. There have been significant improvements in the sophistication of quantitative methods of safety and risk assessment, but the progress on techniques most suitable for organizational safety risk frameworks has been limited. The focus of this paper is on the choice of 'representational schemes' and 'techniques.' A methodology for selecting appropriate candidate techniques and their integration in the form of a 'hybrid' approach is proposed. Then an example is given through an integration of System Dynamics (SD), Bayesian Belief Network (BBN), Event Sequence Diagram (ESD), and Fault Tree (FT) in order to demonstrate the feasibility and value of hybrid techniques. The proposed hybrid approach integrates deterministic and probabilistic modeling perspectives, and provides a flexible risk management tool for complex socio-technical systems. An application of the hybrid technique is provided in the aviation safety domain, focusing on airline maintenance systems. The example demonstrates how the hybrid method can be used to analyze the dynamic effects of organizational factors on system risk.

Asymmetric diffusion model for oblique-incidence reflectometry

Institute of Scientific and Technical Information of China (English)

Yaqin Chen; Liji Cao; Liqun Sun

2011-01-01

A diffusion theory model induced by a line source distribution is presented for oblique-incidence reflectom-etry. By fitting to this asymmetric diffusion model, the absorption and reduced scattering coefficients μa and μ's of the turbid medium can both be determined with accuracy of 10% from the absolute profile of the diffuse reflectance in the incident plane at the negative position -1.5 transport mean free path (mfp') away from the incident point; particularly, μ's can be estimated from the data at positive positions within 0-1.0 mfp' with 10% accuracy. The method is verified by Monte Carlo simulations and experimentally tested on a phantom.%A diffusion theory model induced by a line source distribution is presented for oblique-incidence reflectometry.By fitting to this asymmetric diffusion model,the absorption and reduced scattering coefficients μa and μ's of the turbid medium can both be determined with accuracy of 10％ from the absolute profile of the diffuse reflectance in the incident plane at the negative position -1.5 transport mean free path (mfp')away from the incident point;particularly,μ's can be estimated from the data at positive positions within 0-1.0 mfp' with 10％ accuracy.The method is verified by Monte Carlo simulations and experimentally tested on a phantom.Knowledge about the optical properties,including the absorption coefficient (μa) and the reduced scattering coefficient (μ's =μs(1-g)),where μs is the scattering coefficient and g is the anisotropy factor of scattering,of biological tissues plays an important role for optical therapeutic and diagnostic techniques in medicine.

Analysing Medieval Urban Space; a methodology

Directory of Open Access Journals (Sweden)

Marlous L. Craane MA

2007-08-01

Full Text Available This article has been written in reaction to recent developments in medieval history and archaeology, to study not only the buildings in a town but also the spaces that hold them together. It discusses a more objective and interdisciplinary approach for analysing urban morphology and use of space. It proposes a 'new' methodology by combining town plan analysis and space syntax. This methodology was trialled on the city of Utrecht in the Netherlands. By comparing the results of this 'new' methodology with the results of previous, more conventional, research, this article shows that space syntax can be applied successfully to medieval urban contexts. It does this by demonstrating a strong correlation between medieval economic spaces and the most integrated spaces, just as is found in the study of modern urban environments. It thus provides a strong basis for the use of this technique in future research of medieval urban environments.

Hybrid methodology for tuberculosis incidence time-series forecasting based on ARIMA and a NAR neural network.

Science.gov (United States)

Wang, K W; Deng, C; Li, J P; Zhang, Y Y; Li, X Y; Wu, M C

2017-04-01

Tuberculosis (TB) affects people globally and is being reconsidered as a serious public health problem in China. Reliable forecasting is useful for the prevention and control of TB. This study proposes a hybrid model combining autoregressive integrated moving average (ARIMA) with a nonlinear autoregressive (NAR) neural network for forecasting the incidence of TB from January 2007 to March 2016. Prediction performance was compared between the hybrid model and the ARIMA model. The best-fit hybrid model was combined with an ARIMA (3,1,0) × (0,1,1)12 and NAR neural network with four delays and 12 neurons in the hidden layer. The ARIMA-NAR hybrid model, which exhibited lower mean square error, mean absolute error, and mean absolute percentage error of 0·2209, 0·1373, and 0·0406, respectively, in the modelling performance, could produce more accurate forecasting of TB incidence compared to the ARIMA model. This study shows that developing and applying the ARIMA-NAR hybrid model is an effective method to fit the linear and nonlinear patterns of time-series data, and this model could be helpful in the prevention and control of TB.

Addressing the gap between public health emergency planning and incident response

OpenAIRE

Freedman, Ariela M; Mindlin, Michele; Morley, Christopher; Griffin, Meghan; Wooten, Wilma; Miner, Kathleen

2013-01-01

Objectives: Since 9/11, Incident Command System (ICS) and Emergency Operations Center (EOC) are relatively new concepts to public health, which typically operates using less hierarchical and more collaborative approaches to organizing staff. This paper describes the 2009 H1N1 influenza outbreak in San Diego County to explore the use of ICS and EOC in public health emergency response. Methods:?This study was conducted using critical case study methodology consisting of document review and 18 k...

Incidence of tracheobronchomalacia associated with pulmonary emphysema. Detection with paired inspiratory-expiratory multidetector computed tomography using a low-dose technique

International Nuclear Information System (INIS)

Inoue, Masanori; Hasegawa, Ichiro; Nakano, Keiko; Yamaguchi, Kazuhiro; Kuribayashi, Sachio

2009-01-01

The purpose of this study was to evaluate the frequency of tracheobronchomalacia (TBM) associated with pulmonary emphysema with paired inspiratory-expiratory multidetector computed tomography (MDCT) using a low-dose technique. This study included 56 consecutive patients (55 men, 1 woman; mean age 68.9 years) with pulmonary emphysema who had undergone paired inspiratory-expiratory CT scanning with a low-dose technique (40 mA). All images were retrospectively examined by two thoracic radiologists in a blinded fashion. The diagnosis of TBM was based on the standard criterion of >50% reduction in the cross-sectional area of the tracheobronchial lumen at the end-expiratory phase. A mild TBM criterion of >30% reduction was also reviewed. All patients underwent pulmonary function tests. The relation between the forced expiratory volume in 1 s (FEV 1.0% ) and TBM was statistically analyzed. Four (7.1%) and eight (14.3%) patients were diagnosed as TBM based on the standard and mild criteria, respectively. In four patients, the percentages of luminal narrowing were 63.4% and 51.2%, respectively for tracheomalacia and 59.2% and 62.0%, respectively, for bronchomalacia. The FEV 1.0% values between patients with and without TBM showed no statistical difference. The incidence of TBM associated with pulmonary emphysema was 7.1% with the standard criterion. It is possible that TBM has been underdiagnosed in a number of patients with pulmonary emphysema. (author)

Grazing incidence diffraction : A review

Energy Technology Data Exchange (ETDEWEB)

Gilles, B [LTPCM, ENSEEG. St. Martin d` Heres. (France)

1996-09-01

Different Grazing Incidence Diffraction (GID) methods for the analysis of thin films and multilayer structures are reviewed in three sections: the reflectivity is developed in the first one, which includes the non-specular diffuse scattering. The second one is devoted to the extremely asymmetric Bragg diffraction and the third one to the in-plane Bragg diffraction. Analytical formulations of the scattered intensities are developed for each geometry, in the framework of the kinetical analysis as well as the dynamical theory. Experimental examples are given to illustrate the quantitative possibility of the GID techniques.

Real-time detection of dielectric anisotropy or isotropy in unconventional oil-gas reservoir rocks supported by the oblique-incidence reflectivity difference technique.

Science.gov (United States)

Zhan, Honglei; Wang, Jin; Zhao, Kun; Lű, Huibin; Jin, Kuijuan; He, Liping; Yang, Guozhen; Xiao, Lizhi

2016-12-15

Current geological extraction theory and techniques are very limited to adequately characterize the unconventional oil-gas reservoirs because of the considerable complexity of the geological structures. Optical measurement has the advantages of non-interference with the earth magnetic fields, and is often useful in detecting various physical properties. One key parameter that can be detected using optical methods is the dielectric permittivity, which reflects the mineral and organic properties. Here we reported an oblique-incidence reflectivity difference (OIRD) technique that is sensitive to the dielectric and surface properties and can be applied to characterization of reservoir rocks, such as shale and sandstone core samples extracted from subsurface. The layered distribution of the dielectric properties in shales and the uniform distribution in sandstones are clearly identified using the OIRD signals. In shales, the micro-cracks and particle orientation result in directional changes of the dielectric and surface properties, and thus, the isotropy and anisotropy of the rock can be characterized by OIRD. As the dielectric and surface properties are closely related to the hydrocarbon-bearing features in oil-gas reservoirs, we believe that the precise measurement carried with OIRD can help in improving the recovery efficiency in well-drilling process.

Relation between the geochemical environment and disease incidence rate. A case study the Island Krk in the Adriatic Sea, Croatia

International Nuclear Information System (INIS)

Kutle, A.; Obhodas, J.; Valkovic, V.

2006-01-01

It has been observed that among the seven municipalities of the Island of Krk the three in the central part of the island have increased disease incidence rates for the five groups of diseases: (a) neoplasm, (b) diseases of the blood and blood-forming organs and certain disorders involving the immune mechanism, (c) endocrine, nutritional and metabolic diseases, (d) mental and behavioral disorders and (e) diseases of the circulatory system. One of the etiological factors is assumed to be the influence of the geochemical environment. The average element concentration values of six trace elements (Mn, Fe, Ni, Cu, Zn and As) for the geochemical environment in the individual municipalities were determined by XRF analyses of soil, plant, potable water and hair samples. The data on disease incidence rates for the individual municipalities, from 1997 to 2001, have been obtained from the Public Health Institution in charge of monitoring population health on the island. Diseases' groups have been defined by the WHO methodology. The GPS-GIS methodology was used to obtain maps of trace elements in different matrices and disease incidence distributions. Data analyses were performed by multivariate statistical methods (principal component analysis and cluster analysis). It has been shown that the concentration levels of the elements could be related to disease incidence rates. (author)

Detection, characterization and quantification of inorganic engineered nanomaterials: A review of techniques and methodological approaches for the analysis of complex samples

Energy Technology Data Exchange (ETDEWEB)

Laborda, Francisco, E-mail: flaborda@unizar.es; Bolea, Eduardo; Cepriá, Gemma; Gómez, María T.; Jiménez, María S.; Pérez-Arantegui, Josefina; Castillo, Juan R.

2016-01-21

dealing with complex samples. Single- and multi-method approaches applied to solve the nanometrological challenges posed by a variety of stakeholders are also presented. - Highlights: • The challenge to analyze inorganic nanomaterials is described. • Techniques for detection, characterization and quantification of inorganic nanomaterials are presented. • Sample preparation methods for the analysis of nanomaterials in complex samples are presented. • Methodological approaches posed by stakeholders for solving nanometrological problems are discussed.

Detection, characterization and quantification of inorganic engineered nanomaterials: A review of techniques and methodological approaches for the analysis of complex samples

International Nuclear Information System (INIS)

Laborda, Francisco; Bolea, Eduardo; Cepriá, Gemma; Gómez, María T.; Jiménez, María S.; Pérez-Arantegui, Josefina; Castillo, Juan R.

2016-01-01

dealing with complex samples. Single- and multi-method approaches applied to solve the nanometrological challenges posed by a variety of stakeholders are also presented. - Highlights: • The challenge to analyze inorganic nanomaterials is described. • Techniques for detection, characterization and quantification of inorganic nanomaterials are presented. • Sample preparation methods for the analysis of nanomaterials in complex samples are presented. • Methodological approaches posed by stakeholders for solving nanometrological problems are discussed.

Determinants of Peritoneal Dialysis Technique Failure in Incident US Patients

OpenAIRE

Shen, Jenny I.; Mitani, Aya A.; Saxena, Anjali B.; Goldstein, Benjamin A.; Winkelmayer, Wolfgang C.

2013-01-01

♦ Objectives: Switching from peritoneal dialysis (PD) to hemodialysis (HD) is undesirable, because of complications from temporary vascular access, disruption of daily routine, and higher costs. Little is known about the role that social factors play in technique failure.

Efficient methodologies for system matrix modelling in iterative image reconstruction for rotating high-resolution PET

Energy Technology Data Exchange (ETDEWEB)

Ortuno, J E; Kontaxakis, G; Rubio, J L; Santos, A [Departamento de Ingenieria Electronica (DIE), Universidad Politecnica de Madrid, Ciudad Universitaria s/n, 28040 Madrid (Spain); Guerra, P [Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Madrid (Spain)], E-mail: juanen@die.upm.es

2010-04-07

A fully 3D iterative image reconstruction algorithm has been developed for high-resolution PET cameras composed of pixelated scintillator crystal arrays and rotating planar detectors, based on the ordered subsets approach. The associated system matrix is precalculated with Monte Carlo methods that incorporate physical effects not included in analytical models, such as positron range effects and interaction of the incident gammas with the scintillator material. Custom Monte Carlo methodologies have been developed and optimized for modelling of system matrices for fast iterative image reconstruction adapted to specific scanner geometries, without redundant calculations. According to the methodology proposed here, only one-eighth of the voxels within two central transaxial slices need to be modelled in detail. The rest of the system matrix elements can be obtained with the aid of axial symmetries and redundancies, as well as in-plane symmetries within transaxial slices. Sparse matrix techniques for the non-zero system matrix elements are employed, allowing for fast execution of the image reconstruction process. This 3D image reconstruction scheme has been compared in terms of image quality to a 2D fast implementation of the OSEM algorithm combined with Fourier rebinning approaches. This work confirms the superiority of fully 3D OSEM in terms of spatial resolution, contrast recovery and noise reduction as compared to conventional 2D approaches based on rebinning schemes. At the same time it demonstrates that fully 3D methodologies can be efficiently applied to the image reconstruction problem for high-resolution rotational PET cameras by applying accurate pre-calculated system models and taking advantage of the system's symmetries.

Application of the PISC results and methodology to assess the effectiveness of NDT techniques applied on non nuclear components

International Nuclear Information System (INIS)

Maciga, G.; Papponetti, M.; Crutzen, S.; Jehenson, P.

1990-01-01

Performance demonstration for NDT has been an active topic for several years. Interest in it came to the fore in the early 1980's when several institutions started to propose to use of realistic training assemblies and the formal approach of Validation Centers. These steps were justified for example by the results of the PISC exercises which concluded that there was a need for performance demonstration starting with capability assessment of techniques and procedure as they were routinely applied. If the PISC programme is put under the general ''Nuclear Motivation'', the PISC Methodology could be extended to problems to structural components in general, such as on conventional power plants, chemical, aerospace and offshore industries, where integrity and safety have regarded as being of great importance. Some themes of NDT inspections of fossil power plant and offshore components that could be objects of validation studies will be illustrated. (author)

Discrimination and quantification of contamination and implanted solar wind in Genesis collector shards using grazing incidence synchrotron x-ray techniques: Initial results

International Nuclear Information System (INIS)

Kitts, K.; Sutton, S.; Eng, P.; Ghose, S.; Burnett, D.

2006-01-01

Grazing incidence X-ray fluorescence is a non-destructive technique that can differentiate the embedded solar wind component from surface contamination and collector background in the Genesis shards. Initial solar Fe abundance in D30554 is 8 x 10 12 /cm 2 . Accurate knowledge of the composition of the Sun provides a baseline, which allows an understanding of how the solar system has evolved over time and how solar processes and solar wind mechanics behave. Unfortunately, the errors in photospheric abundances are too large for many planetary science problems and this hampers our understanding of these different processes. Analyses of solar wind implanted in meteorites or lunar soils have provided more precise data but alteration processes on these bodies may complicate such information. In response to this need for pristine solar wind samples, NASA developed and launched the Genesis Probe. Unfortunately, the probe smashed into the Utah desert shattering the 300 collector plates into 15,000+ pieces all of which are now coated in a both a fine terrestrial dust and Si and Ge powder from the disrupted collectors themselves. The solar wind penetration depth is 100-200 nm and the superposed contamination layers are typically 40-50 nm. Stringent cleaning regimes have the potential of removing the solar wind itself. The best solution is to have sufficient spatial resolution to separately analyze the surface contamination and penetrated solar wind. To that end, three Genesis collector array shards and their appropriate flight spares were characterized via grazing incidence x-ray fluorescence and x-ray reflectivity. The goals were (1) to evaluate the various cleaning methods used to eliminate contamination, (2) to identify the collector substrates most suited for this technique, (3) to determine whether the solar wind signature could be deconvolved from the collector background signature, and (4) to measure the relative abundances of Ca to Ge in the embedded solar wind.

Integral Design Methodology of Photocatalytic Reactors for Air Pollution Remediation

Directory of Open Access Journals (Sweden)

Claudio Passalía

2017-06-01

Full Text Available An integral reactor design methodology was developed to address the optimal design of photocatalytic wall reactors to be used in air pollution control. For a target pollutant to be eliminated from an air stream, the proposed methodology is initiated with a mechanistic derived reaction rate. The determination of intrinsic kinetic parameters is associated with the use of a simple geometry laboratory scale reactor, operation under kinetic control and a uniform incident radiation flux, which allows computing the local superficial rate of photon absorption. Thus, a simple model can describe the mass balance and a solution may be obtained. The kinetic parameters may be estimated by the combination of the mathematical model and the experimental results. The validated intrinsic kinetics obtained may be directly used in the scaling-up of any reactor configuration and size. The bench scale reactor may require the use of complex computational software to obtain the fields of velocity, radiation absorption and species concentration. The complete methodology was successfully applied to the elimination of airborne formaldehyde. The kinetic parameters were determined in a flat plate reactor, whilst a bench scale corrugated wall reactor was used to illustrate the scaling-up methodology. In addition, an optimal folding angle of the corrugated reactor was found using computational fluid dynamics tools.

Spatial analysis on human brucellosis incidence in mainland China: 2004–2010

Science.gov (United States)

Zhang, Junhui; Yin, Fei; Zhang, Tao; Yang, Chao; Zhang, Xingyu; Feng, Zijian; Li, Xiaosong

2014-01-01

Objectives China has experienced a sharply increasing rate of human brucellosis in recent years. Effective spatial monitoring of human brucellosis incidence is very important for successful implementation of control and prevention programmes. The purpose of this paper is to apply exploratory spatial data analysis (ESDA) methods and the empirical Bayes (EB) smoothing technique to monitor county-level incidence rates for human brucellosis in mainland China from 2004 to 2010 by examining spatial patterns. Methods ESDA methods were used to characterise spatial patterns of EB smoothed incidence rates for human brucellosis based on county-level data obtained from the China Information System for Disease Control and Prevention (CISDCP) in mainland China from 2004 to 2010. Results EB smoothed incidence rates for human brucellosis were spatially dependent during 2004–2010. The local Moran test identified significantly high-risk clusters of human brucellosis (all p values brucellosis incidence. PMID:24713215

A new methodology for building local climate change scenarios : A case study of monthly temperature projections for Mexico City

NARCIS (Netherlands)

Estrada, Francisco; Guerrero, VíCtor M.

2014-01-01

This paper proposes a new methodology for generating climate change scenarios at the local scale based on multivariate time series models and restricted forecasting techniques. This methodology offers considerable advantages over the current statistical downscaling techniques such as: (i) it

Development and Current Status of Skull-Image Superimposition - Methodology and Instrumentation.

Science.gov (United States)

Lan, Y

1992-12-01

This article presents a review of the literature and an evaluation on the development and application of skull-image superimposition technology - both instrumentation and methodology - contributed by a number of scholars since 1935. Along with a comparison of the methodologies involved in the two superimposition techniques - photographic and video - the author characterized the techniques in action and the recent advances in computer image superimposition processing technology. The major disadvantage of conventional approaches is its relying on subjective interpretation. Through painstaking comparison and analysis, computer image processing technology can make more conclusive identifications by direct testing and evaluating the various programmed indices. Copyright © 1992 Central Police University.

Spatial Distribution of Black Bear Incident Reports in Michigan.

Directory of Open Access Journals (Sweden)

Jamie E McFadden-Hiller

Full Text Available Interactions between humans and carnivores have existed for centuries due to competition for food and space. American black bears are increasing in abundance and populations are expanding geographically in many portions of its range, including areas that are also increasing in human density, often resulting in associated increases in human-bear conflict (hereafter, bear incidents. We used public reports of bear incidents in Michigan, USA, from 2003-2011 to assess the relative contributions of ecological and anthropogenic variables in explaining the spatial distribution of bear incidents and estimated the potential risk of bear incidents. We used weighted Normalized Difference Vegetation Index mean as an index of primary productivity, region (i.e., Upper Peninsula or Lower Peninsula, primary and secondary road densities, and percentage land cover type within 6.5-km2 circular buffers around bear incidents and random points. We developed 22 a priori models and used generalized linear models and Akaike's Information Criterion (AIC to rank models. The global model was the best compromise between model complexity and model fit (w = 0.99, with a ΔAIC 8.99 units from the second best performing model. We found that as deciduous forest cover increased, the probability of bear incident occurrence increased. Among the measured anthropogenic variables, cultivated crops and primary roads were the most important in our AIC-best model and were both positively related to the probability of bear incident occurrence. The spatial distribution of relative bear incident risk varied markedly throughout Michigan. Forest cover fragmented with agriculture and other anthropogenic activities presents an environment that likely facilitates bear incidents. Our map can help wildlife managers identify areas of bear incident occurrence, which in turn can be used to help develop strategies aimed at reducing incidents. Researchers and wildlife managers can use similar mapping

Spatial Distribution of Black Bear Incident Reports in Michigan.

Science.gov (United States)

McFadden-Hiller, Jamie E; Beyer, Dean E; Belant, Jerrold L

2016-01-01

Interactions between humans and carnivores have existed for centuries due to competition for food and space. American black bears are increasing in abundance and populations are expanding geographically in many portions of its range, including areas that are also increasing in human density, often resulting in associated increases in human-bear conflict (hereafter, bear incidents). We used public reports of bear incidents in Michigan, USA, from 2003-2011 to assess the relative contributions of ecological and anthropogenic variables in explaining the spatial distribution of bear incidents and estimated the potential risk of bear incidents. We used weighted Normalized Difference Vegetation Index mean as an index of primary productivity, region (i.e., Upper Peninsula or Lower Peninsula), primary and secondary road densities, and percentage land cover type within 6.5-km2 circular buffers around bear incidents and random points. We developed 22 a priori models and used generalized linear models and Akaike's Information Criterion (AIC) to rank models. The global model was the best compromise between model complexity and model fit (w = 0.99), with a ΔAIC 8.99 units from the second best performing model. We found that as deciduous forest cover increased, the probability of bear incident occurrence increased. Among the measured anthropogenic variables, cultivated crops and primary roads were the most important in our AIC-best model and were both positively related to the probability of bear incident occurrence. The spatial distribution of relative bear incident risk varied markedly throughout Michigan. Forest cover fragmented with agriculture and other anthropogenic activities presents an environment that likely facilitates bear incidents. Our map can help wildlife managers identify areas of bear incident occurrence, which in turn can be used to help develop strategies aimed at reducing incidents. Researchers and wildlife managers can use similar mapping techniques to

Systems selection methodology for civil nuclear power applications

International Nuclear Information System (INIS)

Scarborough, J.

1988-01-01

A methodology for evaluation and selection of a preferred Advanced Small or Medium Power Reactor (SMPR) for commercial electric power generation is discussed, and an illustrative example is presented with five US Advanced SMPR power plants. The evaluation procedure was developed from a methodology for ranking small, advanced nuclear power plant designs under development by the US Department of Energy (DOE) and Department of Defense (DOD). The methodology involves establishing numerical probability distributions for each of fifteen evaluation criteria for each Advanced SMPR plant. A resultant single probability distribution with its associated numerical mean value is then developed for each Advanced SMPR plant by Monte Carlo sampling techniques in order that each plant may be ranked with an associated statement of certainty. The selection methodology is intended as a screening procedure for commercial offerings to preclude detailed technical and commercial assessments from being conducted for those offerings which do not meet the initial screening criteria

Application of precursor methodology in initiating frequency estimates

International Nuclear Information System (INIS)

Kohut, P.; Fitzpatrick, R.G.

1991-01-01

The precursor methodology developed in recent years provides a consistent technique to identify important accident sequence precursors. It relies on operational events (extracting information from actual experience) and infers core damage scenarios based on expected safety system responses. The ranking or categorization of each precursor is determined by considering the full spectrum of potential core damage sequences. The methodology estimates the frequency of severe core damage based on the approach suggested by Apostolakis and Mosleh, which may lead to a potential overestimation of the severe-accident sequence frequency due to the inherent dependencies between the safety systems and the initiating events. The methodology is an encompassing attempt to incorporate most of the operating information available from nuclear power plants and is an attractive tool from the point of view of risk management. In this paper, a further extension of this methodology is discussed with regard to the treatment of initiating frequency of the accident sequences

Systems selection methodology for civil nuclear power applications

International Nuclear Information System (INIS)

Scarborough, J.C.

1987-01-01

A methodology for evaluation and selection of a preferred Advanced Small or Medium Power Reactor (SMPR) for commercial electric power generation is discussed, and an illustrative example is presented with five U.S. Advanced SMPR power plants. The evaluation procedure was developed from a methodology for ranking small. advenced nuclear power plant designs under development by the U.S. Department of Energy (DOE) and Department of Defense (DOD). The methodology involves establishing numerical probability distributions for each of fifteen evaluation criteria for each Advanced SMPR plant. A resultant single probability distribution with its associated numerical mean value is then developed for each Advanced SMPR plant by Monte Carlo sampling techniques in order that each plant may be ranked with an associated statement of certainty. The selection methodology is intended as a screening procedure for commercial offerings to preclude detailed technical and commercial assessments from being conducted for those offerings which do not meet the initial screening criteria. (auhtor)

Development of methodologies used in the areas of safeguards and nuclear forensics based on LA-HR-ICP-MS technique

International Nuclear Information System (INIS)

Marin, Rafael Coelho

2013-01-01

Environmental sampling performed by means of swipe samples is a methodology frequently employed by International Atomic Energy Agency (IAEA) to verify if the signatory States of the Safeguards Agreements are conducing unauthorized activities. Swipe samples analysis is complementary to the Safeguards ordinary procedures used to verify the information given by the States. In this work it was described a methodology intending to strengthen the nuclear safeguards and nuclear forensics procedures. The proposal is to study and evaluate the laser ablation high resolution inductively coupled plasma mass spectrometry (LA-HR-ICP-MS) technique as an alternative to analyze the real-life swipe samples. The precision achieved through the standard (CRM - 125A) measurements, represented by the relative standard deviation (RSD), was respectively 1.3 %, 0.2 % e 7.6 % for the 234 U/ 238 U, 235 U/ 238 U e 236 U/ 238 U isotopes ratios. The percent uncertainties (u %), which covers the RSD, ranged from 3.5 % to 29.8 % to the 235 U/ 238 U measurements and from 16.6 % to 42.9 % to the 234 U/ 238 U isotope ratio. These results were compatible with former studies performed by the LA-HR-ICP-MS that analyzed real-life swipe samples collected at a nuclear facility. Swipe samples collected from several points of the nuclear facility presented enrichment level ranging from (2.3 ± 0.7) % (sample 3) to (17.3 ± 2.8) % (sample 18). They also allowed detecting different enrichment levels within the facility. (author)

On the sound absorption coefficient of porous asphalt pavements for oblique incident sound waves

NARCIS (Netherlands)

Bezemer-Krijnen, Marieke; Wijnant, Ysbrand H.; de Boer, Andries; Bekke, Dirk; Davy, J.; Don, Ch.; McMinn, T.; Dowsett, L.; Broner, N.; Burgess, M.

2014-01-01

A rolling tyre will radiate noise in all directions. However, conventional measurement techniques for the sound absorption of surfaces only give the absorption coefficient for normal incidence. In this paper, a measurement technique is described with which it is possible to perform in situ sound

Health-Related Quality of Life in Children with Celiac Disease: A Study Based on the Critical Incident Technique

Directory of Open Access Journals (Sweden)

Carlo Catassi

2013-11-01

Full Text Available Celiac Disease (CD is a chronic autoimmune disease triggered by dietary gluten. Gluten avoidance, which is the only available treatment for CD, could impact on quality of life of children with CD. We present the results of a qualitative study on the emotional impact of gluten free diet (GFD on the everyday life of children affected with CD. We investigated 76 celiac patients aged 2–18 years (average age: 9.5 years. By using the Critical Incident Technique (CIT, we defined emotions related to difficulties and awkward situations experienced by the patients. Written answers to open-ended questions from either children (older than 8 years and parents (children younger than 8 years were analyzed qualitatively. We found 80 dilemmas experienced in three different arenas (food situations at school, meals at home, meals outside and characterized lived experiences of children with CD in everyday life (specific emotions, difficulties in relationships and in management of daily life. Children with CD experience strong emotions related to the GFD, permeating several aspects of everyday life. These dilemmas may be missed by a conventional, questionnaire-based approach to the psycho-social consequences of CD treatment.

Case studies of hydrogen sulphide occupational exposure incidents in the UK.

Science.gov (United States)

Jones, Kate

2014-12-15

The UK Health and Safety Executive has investigated several incidents of workplace accidents involving hydrogen sulphide exposure in recent years. Biological monitoring has been used in some incidents to determine the cause of unconsciousness resulting from these incidents and as a supporting evidence in regulatory enforcement. This paper reports on three case incidents and discusses the use of biological monitoring in such cases. Biological monitoring has a role in identifying hydrogen sulphide exposure in incidents, whether these are occupational or in the wider environment. Sample type, time of collection and sample storage are important factors in the applicability of this technique. For non-fatal incidents, multiple urine samples are recommended at two or more time points between the incident and 15 h post-exposure. For routine occupational monitoring, post-shift samples should be adequate. Due to endogenous levels of urinary thiosulphate, it is likely that exposures in excess of 12 ppm for 30 min (or 360 ppm/min equivalent) would be detectable using biological monitoring. This is within the Acute Exposure Guideline Level 2 (the level of the chemical in air at or above which there may be irreversible or other serious long-lasting effects or impaired ability to escape) for hydrogen sulphide. Crown Copyright © 2014. Published by Elsevier Ireland Ltd. All rights reserved.

Application of the weighted total field-scattering field technique to 3D-PSTD light scattering model

Science.gov (United States)

Hu, Shuai; Gao, Taichang; Liu, Lei; Li, Hao; Chen, Ming; Yang, Bo

2018-04-01

PSTD (Pseudo Spectral Time Domain) is an excellent model for the light scattering simulation of nonspherical aerosol particles. However, due to the particularity of its discretization form of the Maxwell's equations, the traditional Total Field/Scattering Field (TF/SF) technique for FDTD (Finite Differential Time Domain) is not applicable to PSTD, and the time-consuming pure scattering field technique is mainly applied to introduce the incident wave. To this end, the weighted TF/SF technique proposed by X. Gao is generalized and applied to the 3D-PSTD scattering model. Using this technique, the incident light can be effectively introduced by modifying the electromagnetic components in an inserted connecting region between the total field and the scattering field region with incident terms, where the incident terms are obtained by weighting the incident field by a window function. To optimally determine the thickness of connection region and the window function type for PSTD calculations, their influence on the modeling accuracy is firstly analyzed. To further verify the effectiveness and advantages of the weighted TF/SF technique, the improved PSTD model is validated against the PSTD model equipped with pure scattering field technique in both calculation accuracy and efficiency. The results show that, the performance of PSTD seems to be not sensitive to variation of window functions. The number of the connection layer required decreases with the increasing of spatial resolution, where for spatial resolution of 24 grids per wavelength, a 6-layer region is thick enough. The scattering phase matrices and integral scattering parameters obtained by the improved PSTD show an excellent consistency with those well-tested models for spherical and nonspherical particles, illustrating that the weighted TF/SF technique can introduce the incident precisely. The weighted TF/SF technique shows higher computational efficiency than pure scattering technique.

Mantram repetition for stress management in veterans and employees: a critical incident study.

Science.gov (United States)

Bormann, Jill E; Oman, Doug; Kemppainen, Jeanne K; Becker, Sheryl; Gershwin, Madeline; Kelly, Ann

2006-03-01

This paper reports a study assessing the usefulness of a mantram repetition programme. Complementary/alternative therapies are becoming commonplace, but more research is needed to assess their benefits. A 5-week programme teaching a 'mind-body-spiritual' technique of silently repeating a mantram - a word or phrase with spiritual meaning - to manage stress was developed. A mantram was chosen by individuals, who were taught to repeat it silently throughout the day or night to interrupt unwanted thoughts and elicit the relaxation response. Participants who attended a 5-week course were invited to participate in the study. Of those who consented, a randomly selected subset (n = 66) was contacted approximately 3 months after the course for a telephone interview using the critical incident interviewing technique. Participants were asked whether the intervention was helpful or not, and if helpful, to identify situations where it was applied. Interviews were transcribed and incidents were identified and categorized to create a taxonomy of uses. The data were collected in 2001-2002. Participants included 30 veterans, mostly males (97%), and 36 hospital employees, mostly females (86%). Mean age was 56 years (sd = 12.94). Fifty-five participants (83.3%) practiced the technique and reported 147 incidents where the programme was helpful. Outcomes were organized into a taxonomy of incidents using four major categories that included managing: (a) emotions other than stress (51%); (b) stress (23.8%); (c) insomnia (12.9%); and (d) unwanted thoughts (12.3%). A group of raters reviewed the categories for inter-rater reliability. The majority of participants from two distinct samples reported that the mantram programme was helpful in a variety of situations. The critical incident interviewing method was found to be practical, efficient, and thorough in collecting and analyzing data. Such qualitative methods contribute to understanding the benefits of mind-body complementary therapies.

Parkinson's disease in Russia: prevalence and incidence

Directory of Open Access Journals (Sweden)

Razdorskaya V.V.

2016-09-01

Full Text Available The results of the regional studies on the frequency of Parkinson's disease (PD and the incidence of it in Russia have been generalized, the main factors that determine the quality of the estimates of this disease epidemiological indicators have been identifyd. The article summarizes data from 19 original studies on the epidemiology of parkinsonism and Parkinson's disease in Russia published between 2005-2015. Due to the statistical heterogeneity of the primary results computational analytics was not applied to the data; however, data consolidation allowed to perform a trend analysis of epidemiological indicators. The methodological basis of the majority of studies was medical aid appealabil-ity; two of the studies used door-to-door surveys. One of the studies returned questionably low epidemiological indicators obtained from the medical records, and the rest showed the standardized prevalence of 30.0-139.9/100,000 and incidence of 7.63-21.8/100,000 per year. Contribution of Parkinson's disease to the nosological structure of parkinsonism was >61.3%. Estimate of the number of patients with PD in Russia is approximately 210,000 people. Conclusions are made regarding the prevalence of PD in Russia according to the cross-cutting research on the level of indicators in the Western countries. The prevalence of PD by appealability is 2-3 times less than the prevalence in continuous research, both national and foreign. The incidence of PD, demonstrated in half of the studies, is stable from region to region and is comparable with the universally recognized values.

Essential ultrasound techniques of the pediatric airway

DEFF Research Database (Denmark)

Stafrace, Samuel; Engelhardt, Thomas; Teoh, Wendy H

2016-01-01

Ultrasound of the airways is a technique which has been described in a number of recent articles and reviews highlighting the diagnostic possibilities and simple methodology. However, there is a paucity of information focusing specifically on such methods in children where equipment, technique, a...

Critical incidents among women entrepreneurs: Personal and professional issues

Directory of Open Access Journals (Sweden)

Vânia Maria Jorge Nassif

2016-06-01

Full Text Available ABSTRACT The objective of this paper is to analyze critical situations experienced by women entrepreneurs and understand how they have overcome such situations. The study contributes to the understanding of the issues related to the activities of women entrepreneurs and shows that the use of the critical incident technique is relevant to the development of research in the field of entrepreneurship. The data were collected using a specific form with 115 women participating in the study. The analysis of critical incidents showed that in addition to the practical issues regarding the management of their business, emotions are interconnected with their business development. Unlike international studies in the field, the critical incidents experienced by Brazilian women entrepreneurs overlap with personal aspects. The women involved in this study face emotional difficulties, but are also motivated by strong feelings of determination to overcome their problems.

Tenon hospital 3-D dosimetric methodology for radiosurgery of complex AVMs

International Nuclear Information System (INIS)

Lefkopoulos, D.; Schlienger, M.; Plazas, M.C.; Laugier, A.

1990-01-01

This paper presents the methodology of the irradiation treatment planning for the calculation of the 3-D dose distribution developed at the Tenon Hospital since four years. This dosimetric method is independent of the Linac irradiation technique, thus is can be used with any other type of radiosurgery technique. (author)

The Application of Critical Incident Procedures for an Initial Audit of Organizational Communication.

Science.gov (United States)

Rutherford, R. Stanley

This paper discusses the concept of the critical incidents technique, traces its early development in the training of airplane pilots during World War II, sketches the requirements of the typical steps, notes the few studies in communication using this technique, provides an evaluation, and briefly describes a study concerning department chairmen.…

The Incidence of Intravascular Needle Entrance during Inferior Alveolar Nerve Block Injection.

Science.gov (United States)

Taghavi Zenouz, Ali; Ebrahimi, Hooman; Mahdipour, Masoumeh; Pourshahidi, Sara; Amini, Parisa; Vatankhah, Mahdi

2008-01-01

Dentists administer thousands of local anesthetic injections every day. Injection to a highly vascular area such as pterygomandibular space during an inferior alveolar nerve block has a high risk of intravascular needle entrance. Accidental intravascular injection of local anesthetic agent with vasoconstrictor may result in cardiovascular and central nervous system toxicity, as well as tachycardia and hypertension. There are reports that indicate aspiration is not performed in every injection. The aim of the present study was to assess the incidence of intravascular needle entrance in inferior alveolar nerve block injections. Three experienced oral and maxillofacial surgeons performed 359 inferior alveolar nerve block injections using direct or indirect techniques, and reported the results of aspiration. Aspirable syringes and 27 gauge long needles were used, and the method of aspiration was similar in all cases. Data were analyzed using t-test. 15.3% of inferior alveolar nerve block injections were aspiration positive. Intravascular needle entrance was seen in 14.2% of cases using direct and 23.3% of cases using indirect block injection techniques. Of all injections, 15.8% were intravascular on the right side and 14.8% were intravascular on the left. There were no statistically significant differences between direct or indirect block injection techniques (P = 0.127) and between right and left injection sites (P = 0.778). According to our findings, the incidence of intravascular needle entrance during inferior alveolar nerve block injection was relatively high. It seems that technique and maneuver of injection have no considerable effect in incidence of intravascular needle entrance.

'Emerging technologies for the changing global market' - Prioritization methodology for chemical replacement

Science.gov (United States)

Cruit, Wendy; Schutzenhofer, Scott; Goldberg, Ben; Everhart, Kurt

1993-01-01

This project served to define an appropriate methodology for effective prioritization of technology efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semiquantitative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results will be implemented as a guideline for consideration for current NASA propulsion systems.

Reference Management Methodologies for Large Structural Models at Kennedy Space Center

Science.gov (United States)

Jones, Corey; Bingham, Ryan; Schmidt, Rick

2011-01-01

There have been many challenges associated with modeling some of NASA KSC's largest structures. Given the size of the welded structures here at KSC, it was critically important to properly organize model struc.ture and carefully manage references. Additionally, because of the amount of hardware to be installed on these structures, it was very important to have a means to coordinate between different design teams and organizations, check for interferences, produce consistent drawings, and allow for simple release processes. Facing these challenges, the modeling team developed a unique reference management methodology and model fidelity methodology. This presentation will describe the techniques and methodologies that were developed for these projects. The attendees will learn about KSC's reference management and model fidelity methodologies for large structures. The attendees will understand the goals of these methodologies. The attendees will appreciate the advantages of developing a reference management methodology.

A proposed descriptive methodology for environmental geologic (envirogeologic) site characterization

International Nuclear Information System (INIS)

Schwarz, D.L.; Snyder, W.S.

1994-01-01

We propose a descriptive methodology for use in environmental geologic (envirogeologic) site characterization. The method uses traditional sedimentologic descriptions augmented by environmental data needs, and facies analysis. Most other environmental methodologies for soil and sediment characterization use soil engineering and engineering geology techniques that classify by texture and engineering properties. This technique is inadequate for envirogeologic characterization of sediments. In part, this inadequacy is due to differences in the grain-size between the Unified soil Classification and the Udden-Wentworth scales. Use of the soil grain-size classification could easily cause confusion when attempting to relate descriptions based on this classification to our basic understanding of sedimentary depositional systems. The proposed envirogeologic method uses descriptive parameters to characterize a sediment sample, suggests specific tests on samples for adequate characterization, and provides a guidelines for subsurface facies analysis, based on data retrieved from shallow boreholes, that will allow better predictive models to be developed. This methodology should allow for both a more complete site assessment, and provide sufficient data for selection of the appropriate remediation technology, including bioremediation. 50 refs

Legal decision-making by people with aphasia: critical incidents for speech pathologists.

Science.gov (United States)

Ferguson, Alison; Duffield, Gemma; Worrall, Linda

2010-01-01

The assessment and management of a person with aphasia for whom decision-making capacity is queried represents a highly complex clinical issue. In addition, there are few published guidelines and even fewer published accounts of empirical research to assist. The research presented in this paper aimed to identify the main issues for speech pathologists when decision-making capacity for legal and related matters arose for their clients with aphasia, and to describe qualitatively the nature of these issues and the practices of the speech pathologists in these situations. The methodology was informed by the qualitative research paradigm and made use of the semi-structured interview methods developed for the Critical Incident Technique. Nine speech pathologists, with a range of clinical experience between three and 27 years, were interviewed by telephone, with verbatim notes being taken on-line by the interviewer. The speech pathologists described a total of 21 clients (15 male, six female) with acquired neurological communication disorders (including cerebral vascular accident, traumatic brain injury, and tumour) whose care had raised critical incidents for the speech pathologist in relation to legal and related matters. These verbatim notes were qualitatively analysed using NVivo qualitative analysis software. The main incidents related to legal decisions (for example, power of attorney, will-making), as well as decisions involving consent for medical treatment, discharge, accommodation, and business/financial decisions. In all but one of the incidents recounted, the issues centred on a situation of conflict between the person with aphasia and their family, friends or with the multidisciplinary team. The roles taken by the speech pathologists ranged from those expected within a speech pathology scope of practice, such as that of assessor and consultant, to those which arguably present dilemmas and conflict of interest, for example, interpreter, advocate. The

GREEN LEAN METHODOLOGY: ENTERPRISE ENERGY MANAGEMENT FOR INDUSTRIAL COMPANIES

Directory of Open Access Journals (Sweden)

Alin POSTEUCĂ

2013-05-01

Full Text Available The purpose of this article is to show the usefulness of Lean Manufacturing techniques when approaching the environmental issues. Green Lean Methodology presentation in seven steps with afferent tools and techniques provides a practical framework. Green Lean Methodology follows the Deming’s cycle (PDCA and it aims to achieve the continuous incremental improvement. Increasing the resource use effectiveness is achieved not only by protecting natural resources, but also by increasing productivity. These environmental gains through productivity are possible by continuously reducing losses in transformation processes, by designing/redesigning products and services in order to prevent undesirable environmental effects, by designing the control procedures in the processing flows, by increasing the capital investment in more efficient technology, by continuously improving work performance, by changing the perceptions of senior managers and by a more efficient and effective research and innovation. Keywords

Do COPD patients taught pursed lips breathing (PLB) for dyspnoea management continue to use the technique long-term? A mixed methodological study.

Science.gov (United States)

Roberts, S E; Schreuder, F M; Watson, T; Stern, M

2017-12-01

To investigate whether COPD patients taught pursed lips breathing (PLB) for dyspnoea management continue to use the technique long-term and, if so, their experience of this. A mixed methodological approach using semi-structured telephone interviews, a focus group and observation of current PLB technique was used. Qualitative analysis was based on grounded theory. Participants were recruited from the two inner city London (UK) boroughs. A purposive sample of 13 patients with COPD taught PLB 6 to 24 months previously. 11 participants took part in the telephone interviews; focus group participation and observed PLB was 5/11 and 6/11 respectively. A thematic analysis of interviews and focus group; observation of PLB technique. Nine reported on-going use of PLB with 8 reporting definite benefit. Observed technique showed ongoing ability for PLB to reduce RR and increase SpO 2 . Four distinct themes emerged from the data: use of PLB when short of breath due to physical activity (8/9), increased confidence and reduced panic (4/9), use as an exercise (3/9), use at night (3/9). Those that had discontinued PLB had done so because it didn't help (2) and they had forgotten/were too busy to continue. This study found 9 of 13 of patients taught PLB continued with long-term use and 8 of 13 reporting definite benefit from PLB. The role of PLB in increasing patients' confidence in their ability to manage their breathlessness and, use at night, were novel findings. Copyright © 2016 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

Use of plant specific PSA to evaluate incidents at nuclear power plants

International Nuclear Information System (INIS)

1991-06-01

One of the possible applications of the plant specific probabilistic safety assessment (PSA) is its use in the analysis of operational events at the plant. The methodological development in that area was initiated recently in the framework of the IAEA's Incident Reporting System where determination of the safety significance of the event is essential for optimizing feedback of operating experience. This report provides details of the methodology and procedures to be used in event analysis. The report also contains three case studies which have been performed and summarizes lessons learned from those case studies. The results (event probabilities) obtained using plant specific PSA and the results of the analysis of the same events in the framework of the Accident Sequence Precursor (ASP) programmes (generic models) were compared and commented on. 6 refs, figs and tabs

Scalable Techniques for Formal Verification

CERN Document Server

Ray, Sandip

2010-01-01

This book presents state-of-the-art approaches to formal verification techniques to seamlessly integrate different formal verification methods within a single logical foundation. It should benefit researchers and practitioners looking to get a broad overview of the spectrum of formal verification techniques, as well as approaches to combining such techniques within a single framework. Coverage includes a range of case studies showing how such combination is fruitful in developing a scalable verification methodology for industrial designs. This book outlines both theoretical and practical issue

Adapting Cognitive Task Analysis to Investigate Clinical Decision Making and Medication Safety Incidents.

Science.gov (United States)

Russ, Alissa L; Militello, Laura G; Glassman, Peter A; Arthur, Karen J; Zillich, Alan J; Weiner, Michael

2017-05-03

Cognitive task analysis (CTA) can yield valuable insights into healthcare professionals' cognition and inform system design to promote safe, quality care. Our objective was to adapt CTA-the critical decision method, specifically-to investigate patient safety incidents, overcome barriers to implementing this method, and facilitate more widespread use of cognitive task analysis in healthcare. We adapted CTA to facilitate recruitment of healthcare professionals and developed a data collection tool to capture incidents as they occurred. We also leveraged the electronic health record (EHR) to expand data capture and used EHR-stimulated recall to aid reconstruction of safety incidents. We investigated 3 categories of medication-related incidents: adverse drug reactions, drug-drug interactions, and drug-disease interactions. Healthcare professionals submitted incidents, and a subset of incidents was selected for CTA. We analyzed several outcomes to characterize incident capture and completed CTA interviews. We captured 101 incidents. Eighty incidents (79%) met eligibility criteria. We completed 60 CTA interviews, 20 for each incident category. Capturing incidents before interviews allowed us to shorten the interview duration and reduced reliance on healthcare professionals' recall. Incorporating the EHR into CTA enriched data collection. The adapted CTA technique was successful in capturing specific categories of safety incidents. Our approach may be especially useful for investigating safety incidents that healthcare professionals "fix and forget." Our innovations to CTA are expected to expand the application of this method in healthcare and inform a wide range of studies on clinical decision making and patient safety.

Factors influencing incidence of acute grade 2 morbidity in conformal and standard radiation treatment of prostate cancer

International Nuclear Information System (INIS)

Hanks, Gerald E.; Schultheiss, Timothy E.; Hunt, Margie A.; Epstein, Barry

1995-01-01

Purpose: The fundament hypothesis of conformal radiation therapy is that tumor control can be increased by using conformal treatment techniques that allow a higher tumor dose while maintaining an acceptable level of complications. To test this hypothesis, it is necessary first to estimate the incidence of morbidity for both standard and conformal fields. In this study, we examine factors that influence the incidence of acute grade 2 morbidity in patients treated with conformal and standard radiation treatment for prostate cancer. Methods and Materials: Two hundred and forty-seven consecutive patients treated with conformal technique are combined with and compared to 162 consecutive patients treated with standard techniques. The conformal technique includes special immobilization by a cast, careful identification of the target volume in three dimensions, localization of the inferior border of the prostate using the retrograde urethrogram, and individually shaped portals that conform to the Planning Target Volume (PTV). Univariate analysis compares differences in the incidence of RTOG-EORTC grade two acute morbidity by technique, T stage, age, irradiated volume, and dose. Multivariate logistic regression includes these same variables. Results: In nearly all categories, the conformal treatment group experienced significantly fewer acute grade 2 complications than the standard treatment group. Only volume (prostate ± whole pelvis) and technique (conformal vs. standard) were significantly related to incidence of morbidity on multivariate analysis. When dose is treated as a continuous variable (rather than being dichotomized into two levels), a trend is observed on multivariate analysis, but it does not reach significant levels. The incidence of acute grade 2 morbidity in patients 65 years or older is significantly reduced by use of the conformal technique. Conclusion: The conformal technique is associated with fewer grade 2 acute toxicities for all patients. This

Development of methodology for separation and recovery of uranium from nuclear wastewater

International Nuclear Information System (INIS)

Satpati, S.K.; Roy, S.B.; Pal, Sangita; Tewari, P.K.

2015-01-01

Uranium plays a key role in nuclear power supply, demand of which is growing up with time because of its prospective features. Persistent increase in different nuclear activities leads to increase generation of nuclear wastewater containing uranium. Separation and recovery of the uranium from its unconventional source like nuclear wastewater is worth to explore for addressing the reutilisation of the uranium source. It is also necessary to improve remediation technology of nuclear industries for environmental protection. Development of a suitable process methodology is essential for the purpose to supersede the conventional methodology. In the article, recent developments in several possible methodologies for separation of uranium from dilute solution have been discussed with their merits and demerits. Sorption technique as solid phase extraction methodology has been chosen with suitable polymer matrix and functional moiety based on wastewater characteristics. Polyhydroxamic Acid, PHOA sorbent synthesized following eco-friendly procedure is a promising polymeric chelating sorbents for remediation of nuclear wastewaters and recovery of uranium. Sorption and elution characteristics of the PHOA have been evaluated and illustrated for separation and recovery of uranium from a sample nuclear wastewater. For the remediation of nuclear wastewater SPE technique applying the PHOA, a polymeric sorbent is found to be a potentially suitable methodology. (author)

Parallel routes of human carcinoma development: implications of the age-specific incidence data.

Directory of Open Access Journals (Sweden)

James P Brody

Full Text Available BACKGROUND: The multi-stage hypothesis suggests that cancers develop through a single defined series of genetic alterations. This hypothesis was first suggested over 50 years ago based upon age-specific incidence data. However, recent molecular studies of tumors indicate that multiple routes exist to the formation of cancer, not a single route. This parallel route hypothesis has not been tested with age-specific incidence data. METHODOLOGY/PRINCIPAL FINDINGS: To test the parallel route hypothesis, I formulated it in terms of a mathematical equation and then tested whether this equation was consistent with age-specific incidence data compiled by the Surveillance Epidemiology and End Results (SEER cancer registries since 1973. I used the chi-squared goodness of fit test to measure consistency. The age-specific incidence data from most human carcinomas, including those of the colon, lung, prostate, and breast were consistent with the parallel route hypothesis. However, this hypothesis is only consistent if an immune sub-population exists, one that will never develop carcinoma. Furthermore, breast carcinoma has two distinct forms of the disease, and one of these occurs at significantly different rates in different racial groups. CONCLUSIONS/SIGNIFICANCE: I conclude that the parallel route hypothesis is consistent with the age-specific incidence data only if carcinoma occurs in a distinct sub population, while the multi-stage hypothesis is inconsistent with this data.

Inventory differences: An evaluation methodology

International Nuclear Information System (INIS)

Heinberg, C.L.; Roberts, N.J.

1987-01-01

This paper discusses an evaluation methodology which is used for inventory differences at the Los Alamos National Laboratory. It is recognized that there are various methods which can be, and are being, used to evaluate process inventory differences at DOE facilities. The purpose of this paper is to share our thoughts on the subject and our techniques with those who are responsible for the evaluation of inventory differences at their facility. One of the most dangerous aspects of any evaluation technique, especially one as complex as most inventory difference evaluations tend to be, is to fail to look at the tools being used as indicators. There is a tendency to look at the results of an evaluation by one technique as an absolute. At the Los Alamos National Laboratory, several tools are used and the final evaluation is based on a combination of the observed results of a many-faceted evaluation. The tools used and some examples are presented

A Alternative Analog Circuit Design Methodology Employing Integrated Artificial Intelligence Techniques

Science.gov (United States)

Tuttle, Jeffery L.

In consideration of the computer processing power now available to the designer, an alternative analog circuit design methodology is proposed. Computer memory capacities no longer require the reduction of the transistor operational characteristics to an imprecise formulation. Therefore, it is proposed that transistor modelling be abandoned in favor of fully characterized transistor data libraries. Secondly, availability of the transistor libraries would facilitate an automated selection of the most appropriate device(s) for the circuit being designed. More specifically, a preprocessor computer program to a more sophisticated circuit simulator (e.g. SPICE) is developed to assist the designer in developing the basic circuit topology and the selection of the most appropriate transistor. Once this is achieved, the circuit topology and selected transistor data library would be downloaded to the simulator for full circuit operational characterization and subsequent design modifications. It is recognized that the design process is enhanced by the use of heuristics as applied to iterative design results. Accordingly, an artificial intelligence (AI) interface is developed to assist the designer in applying the preprocessor results. To demonstrate the retrofitability of the AI interface to established programs, the interface is specifically designed to be as non-intrusive to the host code as possible. Implementation of the proposed methodology offers the potential to speed the design process, since the preprocessor both minimizes the required number of simulator runs and provides a higher acceptance potential of the initial and subsequent simulator runs. Secondly, part count reductions may be realizable since the circuit topologies are not as strongly driven by transistor limitations. Thirdly, the predicted results should more closely match actual circuit operations since the inadequacies of the transistor models have been virtually eliminated. Finally, the AI interface

Q methodology, risk training and quality management.

Science.gov (United States)

McKeown, M; Hinks, M; Stowell-Smith, M; Mercer, D; Forster, J

1999-01-01

The results of a Q methodological study of professional understandings of the notion of risk in mental health services within the UK are discussed in relation to the relevance for staff training and quality assurance. The study attempted to access the diversity of understandings of risk issues amongst a multi-professional group of staff (n = 60) attending inter-agency risk training workshops in 1998. Q methodology is presented as both an appropriate means for such inquiry and as a novel experiential technique for training purposes. A tentative argument is advanced that the qualitative accounts generated by Q research could assist in systematic reviews of quality, complementing the singularly quantitative approaches typically represented in the audit process.

Are marketed topical metronidazole creams bioequivalent? Evaluation by in vivo microdialysis sampling and tape stripping methodology

DEFF Research Database (Denmark)

Garcia Ortiz, Patricia Elodia; Hansen, S H; Shah, Surendra P.

2011-01-01

To evaluate the bioequivalence of 3 marketed topical metronidazole formulations by simultaneous dermal microdialysis and stratum corneum sampling by the tape stripping methodology, and to compare the techniques as tools for the determination of bioequivalence.......To evaluate the bioequivalence of 3 marketed topical metronidazole formulations by simultaneous dermal microdialysis and stratum corneum sampling by the tape stripping methodology, and to compare the techniques as tools for the determination of bioequivalence....

Variation in worldwide incidence of amyotrophic lateral sclerosis: a meta-analysis.

Science.gov (United States)

Marin, Benoît; Boumédiene, Farid; Logroscino, Giancarlo; Couratier, Philippe; Babron, Marie-Claude; Leutenegger, Anne Louise; Copetti, Massimilano; Preux, Pierre-Marie; Beghi, Ettore

2017-02-01

To assess the worldwide variation of amyotrophic lateral sclerosis (ALS) incidence, we performed a systematic review and meta-analysis of population-based data published to date. We reviewed Medline and Embase up to June 2015 and included all population-based studies of newly diagnosed ALS cases, using multiple sources for case ascertainment. ALS crude and standardized incidence (on age and sex using the US 2010 population) were calculated. Random effect meta-analysis and meta-regression were performed using the subcontinent as the main study level covariate. Sources of heterogeneity related to the characteristics of the study population and the study methodology were investigated. Among 3216 records, 44 studies were selected, covering 45 geographical areas in 11 sub-continents. A total of 13 146 ALS cases and 825 million person-years of follow-up (PYFU) were co-nsidered. The overall pooled worldwide crude ALS incidence was at 1.75 (1.55-1.96)/100 000 PYFU; 1.68 (1.50-1.85)/100 000 PYFU after standardization. Heterogeneity was identified in ALS standardized incidence between North Europe [1.89 (1.46-2.32)/100 000 PYFU] and East Asia [0.83 (0.42-1.24)/100 000 PYFU, China and Japan P = 0.001] or South Asia [0.73 (0.58-0.89)/100 000/PYFU Iran, P = 0.02]. Conversely, homogeneous rates have been reported in populations from Europe, North America and New Zealand [pooled ALS standardized incidence of 1.81 (1.66-1.97)/100 000 PYFU for those areas]. This review confirms a heterogeneous distribution worldwide of ALS, and sets the scene to sustain a collaborative study involving a wide international consortium to investigate the link between ancestry, environment and ALS incidence. © The Author 2016. Published by Oxford University Press on behalf of the International Epidemiological Association

Structured Intuition: A Methodology to Analyse Entity Authentication

DEFF Research Database (Denmark)

Ahmed, Naveed

and the level of abstraction used in the analysis. Thus, the goal of developing a high level methodology that can be used with different notions of security, authentication, and abstraction is worth considering. In this thesis, we propose a new methodology, called the structured intuition (SI), which addresses...... in our methodology, which is called canonicity, which is a weaker form of message authenticity. As compared to many contemporary analysis techniques, an SI based analysis provides detailed results regarding the design rationales and entity authentication goals of a protocol....... consequences for the security of the system, e.g., private information of legitimate parties may be leaked or the security policy of a trusted system may be violated. At a corporate level, such a failure of authentication may result in loss of proprietary technology or customers' credit card information...

On-Line Maintenance Methodology Development

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyo Won; Kim, Jae Ho; Jae, Moo Sung [Hanyang University, Seoul (Korea, Republic of)

2012-05-15

Most of domestic maintenance activities for nuclear power plants are performed while overhaul. Therefore, On-Line Maintenance (OLM) is one of the proper risks informed application techniques for diffusing maintenance burden during overhaul with safety of the plant is secured. The NUMARC 93-01 (Rev.3) presents the OLM state of the art and it provides methodology. This study adopts NUMARC 93-01 (Rev.3) and present OLM. The reference component is Emergency Diesel Generator (EDG) of Ulchin 3, 4

Computer incident response and forensics team management conducting a successful incident response

CERN Document Server

Johnson, Leighton

2013-01-01

Computer Incident Response and Forensics Team Management provides security professionals with a complete handbook of computer incident response from the perspective of forensics team management. This unique approach teaches readers the concepts and principles they need to conduct a successful incident response investigation, ensuring that proven policies and procedures are established and followed by all team members. Leighton R. Johnson III describes the processes within an incident response event and shows the crucial importance of skillful forensics team management, including when and where the transition to forensics investigation should occur during an incident response event. The book also provides discussions of key incident response components. Provides readers with a complete handbook on computer incident response from the perspective of forensics team management Identify the key steps to completing a successful computer incident response investigation Defines the qualities necessary to become a succ...

Prioritization methodology for chemical replacement

Science.gov (United States)

Cruit, Wendy; Goldberg, Ben; Schutzenhofer, Scott

1995-01-01

Since United States of America federal legislation has required ozone depleting chemicals (class 1 & 2) to be banned from production, The National Aeronautics and Space Administration (NASA) and industry have been required to find other chemicals and methods to replace these target chemicals. This project was initiated as a development of a prioritization methodology suitable for assessing and ranking existing processes for replacement 'urgency.' The methodology was produced in the form of a workbook (NASA Technical Paper 3421). The final workbook contains two tools, one for evaluation and one for prioritization. The two tools are interconnected in that they were developed from one central theme - chemical replacement due to imposed laws and regulations. This workbook provides matrices, detailed explanations of how to use them, and a detailed methodology for prioritization of replacement technology. The main objective is to provide a GUIDELINE to help direct the research for replacement technology. The approach for prioritization called for a system which would result in a numerical rating for the chemicals and processes being assessed. A Quality Function Deployment (QFD) technique was used in order to determine numerical values which would correspond to the concerns raised and their respective importance to the process. This workbook defines the approach and the application of the QFD matrix. This technique: (1) provides a standard database for technology that can be easily reviewed, and (2) provides a standard format for information when requesting resources for further research for chemical replacement technology. Originally, this workbook was to be used for Class 1 and Class 2 chemicals, but it was specifically designed to be flexible enough to be used for any chemical used in a process (if the chemical and/or process needs to be replaced). The methodology consists of comparison matrices (and the smaller comparison components) which allow replacement technology

An introduction to incidence geometry

CERN Document Server

De Bruyn, Bart

2016-01-01

This book gives an introduction to the field of Incidence Geometry by discussing the basic families of point-line geometries and introducing some of the mathematical techniques that are essential for their study. The families of geometries covered in this book include among others the generalized polygons, near polygons, polar spaces, dual polar spaces and designs. Also the various relationships between these geometries are investigated. Ovals and ovoids of projective spaces are studied and some applications to particular geometries will be given. A separate chapter introduces the necessary mathematical tools and techniques from graph theory. This chapter itself can be regarded as a self-contained introduction to strongly regular and distance-regular graphs. This book is essentially self-contained, only assuming the knowledge of basic notions from (linear) algebra and projective and affine geometry. Almost all theorems are accompanied with proofs and a list of exercises with full solutions is given at the end...

A new spectrometer for grazing incidence X-ray fluorescence for the characterization of Arsenic implants and Hf based high-k layers

International Nuclear Information System (INIS)

Ingerle, D.; Meirer, F.; Zoeger, N.; Pepponi, G.; Giubertoni, D.; Steinhauser, G.; Wobrauschek, P.; Streli, C.

2010-01-01

Grazing Incidence X-ray Fluorescence Analysis (GIXRF) is a powerful technique for depth-profiling and characterization of thin layers in depths up to a few hundred nanometers. By measurement of fluorescence signals at various incidence angles Grazing Incidence X-ray Fluorescence Analysis provides information on depth distribution and total dose of the elements in the layers. The technique is very sensitive even in depths of a few nanometers. As Grazing Incidence X-ray Fluorescence Analysis does not provide unambigous depth profile information and needs a realistic input depth profile for fitting, in the context of the EC funded European Integrated Activity of Excellence and Networking for Nano and Micro-Electronics Analysis (ANNA) Grazing Incidence X-ray Fluorescence Analysis is used as a complementary technique to Secondary Ion Mass Spectrometry (SIMS) for the characterization of Ultra Shallow Junctions (USJ). A measuring chamber was designed, constructed and tested to meet the requirements of Grazing Incidence X-ray Fluorescence Analysis. A measurement protocol was developed and tested. Some results for As implants as well as Hf based high k layers on Silicon are shown. For the determination of the bulk As content of the wafers, Instrumental Neutron Activation Analysis has also been applied for comparison.

Application of the integrated safety assessment methodology to the protection of electric systems

International Nuclear Information System (INIS)

Hortal, Javier; Izquierdo, Jose M.

1996-01-01

The generalization of classical techniques for risk assessment incorporating dynamic effects is the main objective of the Integrated Safety Assessment Methodology, as practical implementation of Protection Theory. Transient stability, contingency analysis and protection setpoint verification in electric power systems are particularly appropriate domains of application, since the coupling of reliability and dynamic analysis in the protection assessment process is being increasingly demanded. Suitable techniques for dynamic simulation of sequences of switching events in power systems are derived from the use of quasi-linear equation solution algorithms. The application of the methodology, step by step, is illustrated in a simple but representative example

New methodologies for living material imaging. Compilation of summaries

International Nuclear Information System (INIS)

Barabino, Gabriele; Beaurepaire, Emmanuel; Betrouni, Nacim; Montagnat, Johan; Moonen, Chrit; Olivo-Marin, Jean-Christophe; Paul-Gilloteaux, Perrine; Tillement, Olivier; Barbier, Emmanuel; Beuf, Olivier; Chamot, Christophe; Clarysse, Patrick; Coll, Jean-Luc; Dojat, Michel; Lartizien, Carole; Peyrin, Francoise; Ratiney, Helene; Texier-Nogues, Isabelle; Usson, Yves; Vial, Jean-Claude; Gaillard, Sophie; Aubry, Jean-Francois; Barillot, Christian; Betrouni, Nacim; Beloeil, Jean-Claude; Bernard, Monique; Bridal, Lori; Coll, Jean-Luc; Cozzone, Patrick; Cuenod, Charles-Andre; Darrasse, Luc; Franconi, Jean-Michel; Frapart, Yves-Michel; Grenier, Nicolas; Guilloteau, Denis; Laniece, Philippe; Guilloteau, Denis; Laniece, Philippe; Lethimonnier, Franck; Moonen, Chrit; Pain, Frederic; Patat, Frederic; Tanter, Mickael; Trebossen, Regine; Van Beers, Bernard; Visvikis, Dimitris; Buvat, Irene; Carrault, Guy; Frouin, Frederique; Kouame, Denis; Meste, Olivier; Peyrin, Francoise; Brasse, David; Buvat, Irene; Dauvergne, Denis; Haddad, Ferid; Menard, Laurent; Ouadi, Ali; Olivo-Marin, Jean-Christophe; Pansu, Robert; Peyrieras, Nadine; Salamero, Jean; Usson, Yves; Werts, Martin; Beaurepaire, Emmanuel; Blanchoin, Laurent; Boltze, Frederic; Cavalli, Giacomo; Choquet, Daniel; Coppey, Maite; Dahan, Maxime; Dieterlen, Alain; Ducommun, Bernard; Favard, Cyril; Fort, Emmanuel; Gadal, Olivier; Heliot, Laurent; Hofflack, Bernard; Kervrann, Charles; Langowski, Jorg; LeBivic, Andre; Leveque-Fort, Sandrine; Matthews, Cedric; Monneret, Serge; Mordon, Serge; Mely, Yves

2012-12-01

Living material imaging, which is essential to medical diagnosis and therapy methods as well as fundamental and applied biology, is necessarily pluri-disciplinary, at the intersection of physics, (bio)chemistry and pharmacy, and requests mathematical and computer processing of signals and images. Image processing techniques may be applied at different levels (molecular, cellular or tissue level) or using various modes (optics, X rays, NMR, PET, US). This conference therefore presents recent methodological developments addressing the study of living material. The program of the conference started with a plenary session (multimode non linear microscopy of tissues and embryonary morphogenesis) followed by 6 sessions which titles are: (1) new microscopies applied to living materials), (2) agents for molecular and functional imaging), (3) recent developments in methodologies and instrumentations, (4) image processing methods and techniques, (5) image aided diagnosis, therapy and medical surveillance, (6) heterogenous data bases and distributed computations

"Dealing" with Incidence, Prevalence, and Odds Concepts in Undergraduate Epidemiology

Science.gov (United States)

Senchina, David S.; Laurson, Kelly R.

2009-01-01

Concepts and associated statistical formulae of incidence, prevalence, and odds/odds ratios are core knowledge in epidemiology yet can be confusing for students. The purpose of this project was to develop, validate, and share one possible pedagogical technique using playing cards that could be employed to improve undergraduate understanding of…

Quantifying biopsychosocial aspects in everyday contexts: an integrative methodological approach from the behavioral sciences

Science.gov (United States)

Portell, Mariona; Anguera, M Teresa; Hernández-Mendo, Antonio; Jonsson, Gudberg K

2015-01-01

Contextual factors are crucial for evaluative research in psychology, as they provide insights into what works, for whom, in what circumstances, in what respects, and why. Studying behavior in context, however, poses numerous methodological challenges. Although a comprehensive framework for classifying methods seeking to quantify biopsychosocial aspects in everyday contexts was recently proposed, this framework does not contemplate contributions from observational methodology. The aim of this paper is to justify and propose a more general framework that includes observational methodology approaches. Our analysis is rooted in two general concepts: ecological validity and methodological complementarity. We performed a narrative review of the literature on research methods and techniques for studying daily life and describe their shared properties and requirements (collection of data in real time, on repeated occasions, and in natural settings) and classification criteria (eg, variables of interest and level of participant involvement in the data collection process). We provide several examples that illustrate why, despite their higher costs, studies of behavior and experience in everyday contexts offer insights that complement findings provided by other methodological approaches. We urge that observational methodology be included in classifications of research methods and techniques for studying everyday behavior and advocate a renewed commitment to prioritizing ecological validity in behavioral research seeking to quantify biopsychosocial aspects. PMID:26089708

Epidemiological studies in idiopathic pulmonary fibrosis: pitfalls in methodologies and data interpretation

Directory of Open Access Journals (Sweden)

Antonella Caminati

2015-09-01

Full Text Available Data on incidence, prevalence and mortality of idiopathic pulmonary fibrosis (IPF are sparse and vary across studies. The true incidence and prevalence of the disease are unknown. In general, the overall prevalence and incidence reported in European and Asian countries are lower than those reported in American studies. In recent years, the epidemiological approach to IPF has been difficult for many reasons. First, the diagnostic criteria of the disease have changed over time. Secondly, the coding system used for IPF in administrative databases, the most common data source used to study this aspect of the disease, has been modified in the past few years. Finally, the study design, the methodology and the population selected in each of the studies are very different. All these aspects make comparisons among studies very difficult or impossible. In this review, we list the main issues that might arise when comparing different studies and that should be taken into consideration when describing the state of epidemiological knowledge concerning this pathology.

Incidence of Induced Abortion and Post-Abortion Care in Tanzania.

Science.gov (United States)

Keogh, Sarah C; Kimaro, Godfather; Muganyizi, Projestine; Philbin, Jesse; Kahwa, Amos; Ngadaya, Esther; Bankole, Akinrinola

2015-01-01

Tanzania has one of the highest maternal mortality ratios in the world, and unsafe abortion is one of its leading causes. Yet little is known about its incidence. To provide the first ever estimates of the incidence of unsafe abortion in Tanzania, at the national level and for each of the 8 geopolitical zones (7 in Mainland plus Zanzibar). A nationally representative survey of health facilities was conducted to determine the number of induced abortion complications treated in facilities. A survey of experts on abortion was conducted to estimate the likelihood of women experiencing complications and obtaining treatment. These surveys were complemented with population and fertility data to obtain abortion numbers, rates and ratios, using the Abortion Incidence Complications Methodology. In Tanzania, women obtained just over 405,000 induced abortions in 2013, for a national rate of 36 abortions per 1,000 women age 15-49 and a ratio of 21 abortions per 100 live births. For each woman treated in a facility for induced abortion complications, 6 times as many women had an abortion but did not receive care. Abortion rates vary widely by zone, from 10.7 in Zanzibar to 50.7 in the Lake zone. The abortion rate is similar to that of other countries in the region. Variations by zone are explained mainly by differences in fertility and contraceptive prevalence. Measures to reduce the incidence of unsafe abortion and associated maternal mortality include expanding access to post-abortion care and contraceptive services to prevent unintended pregnancies.

Fire Support Requirements Methodology Study, Phase 2 Proceedings of the Fire Support Methodology Workshop

Science.gov (United States)

1975-12-18

It was not immediatei- clear that the -approach- would- succeed in overcoming the deficiencies of present fire support methodologies which demand- an...support require analysis up to Level 6. They also felt that deficiencies in f technique were most serious at Levels 3, 4 and 5. It was accepted that...defined as: Tk2 = _Tkl ilk2 kl (2) Tkt = Tk,t-l - ’lMktMk,t-l + 𔃼kt ,t-2 I t > (3. where Mt refers to the-number of type k targets killed in time

A Role for Soft Systems Methodology in ELT Projects.

Science.gov (United States)

Holliday, Adrian

1990-01-01

Discusses the uses for soft systems methodology (SSM) in English language training (ELT) projects. It is suggested that ethnographic techniques may help in achieving the understanding needed to start an ELT project while SSM may provide a useful means for structuring ethnographic findings. (Author/VWL)

Quality of nursing care perceived by patients and their nurses: an application of the critical incident technique. Part 2.

Science.gov (United States)

Redfern, S; Norman, I

1999-07-01

The aims of the study were to identify indicators of quality of nursing care from the perceptions of patients and nurses, and to determine the congruence between patients' and nurses' perceptions. The paper is presented in two parts. Part 1 included the background and methods to the study and the findings from the comparison of patients' and nurses' perceptions. Part 2 describes the perceptions of patients and nurses, and draws conclusions drawn from the study as a whole. Patients and nurses in hospital wards were interviewed using the critical incident technique. We grouped 4546 indicators of high and low quality nursing care generated from the interview transcripts into 316 subcategories, 68 categories and 31 themes. The themes were grouped into eight clusters: therapeutic context for care, attitudes and sensitivity, teaching and leadership, motivation to nurse, monitoring and informing, high-dependency care, efficiency and thoroughness, reflection and anticipation. As shown in Part 1 of the paper, congruence between patients' and nurses' perceptions of quality was high and significant, although there was some difference of emphasis. The findings support an emerging theory of interpersonal competence and quality in nursing care.

The Effects of Different Breastfeeding Training Techniques Given for Primiparous Mothers Before Discharge on the Incidence of Cracked Nipples.

Science.gov (United States)

Eksioglu, Aysun; Yesil, Yesim; Demir Gungor, Dilek; Ceber Turfan, Esin

2017-06-01

This research investigated the effects of different breastfeeding training techniques for primiparous mothers before discharge on the incidence of cracked nipples. This was a controlled intervention study that was carried out between 2015 and 2016 on 90 mothers living in İzmir. The mothers were divided into three groups: the demonstration-based training group, brochure group, and routine care-receiving group. The mothers in the "brochure group" were provided with breastfeeding training brochures. Mothers in the demonstration-based training group received one-to-one training using designed doll and puppet tools. The rate of cracked nipples at age 2 weeks was 63.3% in the routine care-receiving group, 56.7% in the brochure group, and 20% in the demonstration-based training group. At the end of the fourth week, the rate was 30% in the routine care-receiving group and less than 10% in the other two groups (p raining group than in the other two groups (p roups in the percentage of exclusive breastfeeding. The results documented that breastfeeding training based on one-to-one demonstration utilizing specially designed audiovisual tools was more effective than the other two methods in the prevention of nipple cracks.

Methodological Approach to Company Cash Flows Target-Oriented Forecasting Based on Financial Position Analysis

OpenAIRE

Sergey Krylov

2012-01-01

The article treats a new methodological approach to the company cash flows target-oriented forecasting based on its financial position analysis. The approach is featured to be universal and presumes application of the following techniques developed by the author: financial ratio values correction techniques and correcting cash flows techniques. The financial ratio values correction technique assumes to analyze and forecast company financial position while the correcting cash flows technique i...

Scrutinizing incident reporting in anaesthesia: why is an incident perceived as critical?

DEFF Research Database (Denmark)

Maaløe, R; la Cour, M; Hansen, A

2006-01-01

The purpose of the present study was to measure the incidence and type of incidents that occurred in relation to anaesthesia and surgery during a 1-year period in six Danish hospitals. Furthermore, we wanted to identify risk factors for incidents, as well as risk factors for incidents being deeme...... critical....

Source-to-incident flux relation for a tokamak fusion test reactor blanket module

International Nuclear Information System (INIS)

Imel, G.R.

1982-01-01

The source-to-incident 14-MeV flux relation for a blanket module on the Tokamak Fusion Test Reactor is derived. It is shown that assumptions can be made that allow an analytical expression to be derived, using point kernel methods. In addition, the effect of a nonuniform source distribution is derived, again by relatively simple point kernel methods. It is thought that the methodology developed is valid for a variety of blanket modules on tokamak reactors

Analysis of the methodology used for the determination of security levels in the port of Manta, Ecuador

Directory of Open Access Journals (Sweden)

Mariela Jahaira Macías Párraga

2015-07-01

Full Text Available This research aims to develop a methodology to evaluate the security of Manta Port progressively achieving secondary objectives that culminate in the creation of a risk matrix. A simple quantitative and qualitative methodology is used; it determines the combination of risk with the damage that could be caused, along with the estimated probability of an incident, thus, leading to a risk assessment. As a final result, a risk matrix for the Port of Manta was developed, which is the final chapter in the development of the suggested methodology; besides, it presents a clear and true picture of risk assessment so as to determine security levels and develop a method feasible to be implemented in any port of the world.

Using Soft Systems Methodology to Address Supply Chain Management Problems

Directory of Open Access Journals (Sweden)

Gulender Gencoglu

2002-05-01

Full Text Available This paper reports an investigation of if, and how, Soft Systems Methodology (SSM might.be used to facilitate better management of industry supply chains. In two workshops involving supply chain managers from the Textile Clothing and Footwear (TCF industry and industry facilitators, ways in which SSM techniques might supplement existing Supply Chain Management (SCM workshop approaches have been explored. Specifically, the placement of SSM techniques within a workshop setting, reactions to the techniques, perceived reasons for using SSM, together with strengths and difficulties encountered, have been examined.

Thyroid Cancer Incidence in New Jersey: Time Trend, Birth Cohort and Socioeconomic Status Analysis (1979-2006)

International Nuclear Information System (INIS)

Roche, L.M.; Niu, X.; Pawlish, K.S.; Henry, K.A.

2011-01-01

The study's purpose was to investigate thyroid cancer incidence time trends, birth cohort effects, and association with socioeconomic status (SES) in New Jersey (NJ), a high incidence state, using NJ State Cancer Registry data. Thyroid cancer incidence rates in each sex, nearly all age groups, two major histologists and all stages significantly increased between 1979 and 2006. For each sex, age-specific incidence rates began greatly increasing in the 1924 birth cohort and, generally, the highest thyroid cancer incidence rate for each five-year age group occurred in the latest birth cohort and diagnosis period. Thyroid cancer incidence rates were significantly higher in NJ Census tracts with higher SES and in counties with a higher percentage of insured residents. These results support further investigation into the relationship between rising thyroid cancer incidence and increasing population exposure to medical (including diagnostic) radiation, as well as widespread use of more sensitive diagnostic techniques

Uncovering the Transnational Networks, Organisational Techniques and State-Corporate Ties Behind Grand Corruption: Building an Investigative Methodology

Directory of Open Access Journals (Sweden)

Kristian Lasslett

2017-11-01

Full Text Available While grand corruption is a major global governance challenge, researchers notably lack a systematic methodology for conducting qualitative research into its complex forms. To address this lacuna, the following article sets out and applies the corruption investigative framework (CIF, a methodology designed to generate a systematic, transferable approach for grand corruption research. Its utility will be demonstrated employing a case study that centres on an Australian-led megaproject being built in Papua New Guinea’s capital city, Port Moresby. Unlike conventional analyses of corruption in Papua New Guinea, which emphasise its local characteristics and patrimonial qualities, application of CIF uncovered new empirical layers that centre on transnational state-corporate power, the ambiguity of civil society, and the structural inequalities that marginalise resistance movements. The important theoretical consequences of the findings and underpinning methodology are explored.

Large sample NAA facility and methodology development

International Nuclear Information System (INIS)

Roth, C.; Gugiu, D.; Barbos, D.; Datcu, A.; Aioanei, L.; Dobrea, D.; Taroiu, I. E.; Bucsa, A.; Ghinescu, A.

2013-01-01

A Large Sample Neutron Activation Analysis (LSNAA) facility has been developed at the TRIGA- Annular Core Pulsed Reactor (ACPR) operated by the Institute for Nuclear Research in Pitesti, Romania. The central irradiation cavity of the ACPR core can accommodate a large irradiation device. The ACPR neutron flux characteristics are well known and spectrum adjustment techniques have been successfully applied to enhance the thermal component of the neutron flux in the central irradiation cavity. An analysis methodology was developed by using the MCNP code in order to estimate counting efficiency and correction factors for the major perturbing phenomena. Test experiments, comparison with classical instrumental neutron activation analysis (INAA) methods and international inter-comparison exercise have been performed to validate the new methodology. (authors)

Introduction of a prehospital critical incident monitoring system--pilot project results.

Science.gov (United States)

Stella, Julian; Davis, Anna; Jennings, Paul; Bartley, Bruce

2008-01-01

trend/further observation and analysis responses (5.2%; CI = 4.9-5.5%). The pilot project demonstrates successful implementation of an incident monitoring system within a regional, prehospital environment. The combination of incident detecting techniques has a high yield with potential to capture different error types. The large proportion of incidents in the "near miss" category allows analysis of incidents without patient harm. The majority of incidents were system related and many were mitigated by circumstance. The model used is appropriate for ongoing incident monitoring in this setting.

Giibinenimidizomin: Owning Ourselves--Critical Incidents in the Attainment of Aboriginal Identity

Science.gov (United States)

Goodwill, Alanaise O.; McCormick, Rod

2012-01-01

This research explored the facilitation and hindrance of Aboriginal identity attainment and developed a scheme of categories to describe what facilitates and hinders cultural identity among Canadian Aboriginal adults living in British Columbia. Twelve individuals, interviewed using the critical incident technique, were asked to describe observable…

Machine learning methods reveal the temporal pattern of dengue incidence using meteorological factors in metropolitan Manila, Philippines.

Science.gov (United States)

Carvajal, Thaddeus M; Viacrusis, Katherine M; Hernandez, Lara Fides T; Ho, Howell T; Amalin, Divina M; Watanabe, Kozo

2018-04-17

Several studies have applied ecological factors such as meteorological variables to develop models and accurately predict the temporal pattern of dengue incidence or occurrence. With the vast amount of studies that investigated this premise, the modeling approaches differ from each study and only use a single statistical technique. It raises the question of whether which technique would be robust and reliable. Hence, our study aims to compare the predictive accuracy of the temporal pattern of Dengue incidence in Metropolitan Manila as influenced by meteorological factors from four modeling techniques, (a) General Additive Modeling, (b) Seasonal Autoregressive Integrated Moving Average with exogenous variables (c) Random Forest and (d) Gradient Boosting. Dengue incidence and meteorological data (flood, precipitation, temperature, southern oscillation index, relative humidity, wind speed and direction) of Metropolitan Manila from January 1, 2009 - December 31, 2013 were obtained from respective government agencies. Two types of datasets were used in the analysis; observed meteorological factors (MF) and its corresponding delayed or lagged effect (LG). After which, these datasets were subjected to the four modeling techniques. The predictive accuracy and variable importance of each modeling technique were calculated and evaluated. Among the statistical modeling techniques, Random Forest showed the best predictive accuracy. Moreover, the delayed or lag effects of the meteorological variables was shown to be the best dataset to use for such purpose. Thus, the model of Random Forest with delayed meteorological effects (RF-LG) was deemed the best among all assessed models. Relative humidity was shown to be the top-most important meteorological factor in the best model. The study exhibited that there are indeed different predictive outcomes generated from each statistical modeling technique and it further revealed that the Random forest model with delayed meteorological

Incidence of and factors related to late complications in conformal and conventional radiation treatment of cancer of the prostate

Energy Technology Data Exchange (ETDEWEB)

Schultheiss, Timothy E; Hanks, Gerald E; Hunt, Margie A; Lee, W Robert

1995-06-15

Purpose: The fundament hypothesis of conformal radiation therapy is that tumor control can be increased by using conformal treatment techniques that allow a higher tumor dose while maintaining an acceptable level of complications. To test this hypothesis, it is necessary first to estimate the incidence of morbidity for both standard and conformal fields. In this study, we examine factors that influence the incidence of late Grade 3 and 4 morbidity in patients treated with conformal and standard radiation treatment for prostate cancer. Methods and Materials: Six hundred sixteen consecutive patients treated with conformal or standard techniques between 1986 and 1994 to doses greater than 65 Gy and with more than 3 months follow-up were analyzed. No patients treated with prostatectomies were included in the analysis. The conformal technique includes special immobilization by a cast, careful identification of the target volume in three dimensions, localization of the inferior border of the prostate using a retrograde urethrogram, and individually shaped portals that conform to the Planning Target Volume (PTV). Multivariate analysis using a proportional hazards model compares differences in the incidence of Radiation Therapy Oncology Group/European Organization for Research and Center Treatment (RTOG/EORTC) Grade 3 and 4 late gastrointestinal (GI) and genitourinary (GU) morbidity by technique, T-stage, grade, age, hormonal treatment, irradiated volume, dose, and comorbid conditions. Grade 3 rectal bleeding was defined as requiring three or more cautery procedures. Results: The overall actuarial incidence of genitourinary (GU) toxicities at 5 years was 3.4%, with the crude incidence being six cases in 616 patients satisfying the selection criteria; for gastrointestinal (GI) toxicities, the overall actuarial incidence was 2.7%, with the crude incidence being 13 cases out of 616 patients. The average time to complication for our patients was 12.8 months for GI toxicity and

Digital Storytelling: A Novel Methodology for Sexual Health Promotion

Science.gov (United States)

Guse, Kylene; Spagat, Andrea; Hill, Amy; Lira, Andrea; Heathcock, Stephen; Gilliam, Melissa

2013-01-01

Digital storytelling draws on the power of narrative for personal and social transformation. This technique has many desirable attributes for sexuality education, including a participatory methodology, provision of a "safe space" to collaboratively address stigmatized topics, and an emphasis on the social and political contexts that…

Incidence and Prevalence of Sexual Dysfunction in Women and Men: A Consensus Statement from the Fourth International Consultation on Sexual Medicine 2015.

Science.gov (United States)

McCabe, Marita P; Sharlip, Ira D; Lewis, Ron; Atalla, Elham; Balon, Richard; Fisher, Alessandra D; Laumann, Edward; Lee, Sun Won; Segraves, Robert T

2016-02-01

The incidence and prevalence of various sexual dysfunctions in women and men are important to understand to designate priorities for epidemiologic and clinical research. This manuscript was designed to conduct a review of the literature to determine the incidence and prevalence of sexual dysfunction in women and men. Members of Committee 1 of the Fourth International Consultation on Sexual Medicine (2015) searched and reviewed epidemiologic literature on the incidence and prevalence of sexual dysfunctions. Key older studies and most studies published after 2009 were included in the text of this article. The outcome measures were the reports in the various studies of the incidence and prevalence of sexual dysfunction among women and men. There are more studies on incidence and prevalence for men than for women and many more studies on prevalence than incidence for women and men. The data indicate that the most frequent sexual dysfunctions for women are desire and arousal dysfunctions. In addition, there is a large proportion of women who experience multiple sexual dysfunctions. For men, premature ejaculation and erectile dysfunction are the most common sexual dysfunctions, with less comorbidity across sexual dysfunctions for men compared with women. These data need to be treated with caution, because there is a high level of variability across studies caused by methodologic differences in the instruments used to assess presence of sexual dysfunction, ages of samples, nature of samples, methodology used to gather the data, and cultural differences. Future research needs to use well-validated tools to gather data and ensure that the data collection strategy is clearly described. Copyright © 2016 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.

The Level of Fibula Osteotomy and Incidence of Peroneal Nerve ...

African Journals Online (AJOL)

2010-06-29

Jun 29, 2010 ... Journal of Surgical Technique and Case Report | Jan-Jun 2010 | Vol-2 | Issue-1. 17. The Level of Fibula Osteotomy and Incidence of Peroneal. Nerve Palsy in Proximal Tibial Osteotomy. A. O. Ogbemudia, P. F. A. Umebese, A. Bafor, E. Igbinovia, P. E. Ogbemudia. INTRODUCTION. Osteotomy of the fibula is ...

A performance assessment methodology for low-level radioactive waste disposal

International Nuclear Information System (INIS)

Derring, L.R.

1990-01-01

To demonstrate compliance with the performance objectives governing protection of the general population in 10 CFR 61.41, applicants for land disposal of low-level radioactive waste are required to conduct a pathways analysis, or quantitative evaluation of radionuclide release, transport through environmental media, and dose to man. The Nuclear Regulatory Commission staff defined a strategy and initiated a project at Sandia National Laboratories to develop a methodology for independently evaluating an applicant's analysis of postclosure performance. This performance assessment methodology was developed in five stages: identification of environmental pathways, ranking the significance of the pathways, identification and integration of models for pathway analyses, identification and selection of computer codes and techniques for the methodology, and implementation of the codes and documentation of the methodology. This paper summarizes the NRC approach for conducting evaluations of license applications for low-level radioactive waste facilities. 23 refs

An innovative methodology for the non-destructive diagnosis of architectural elements of ancient historical buildings.

Science.gov (United States)

Fais, Silvana; Casula, Giuseppe; Cuccuru, Francesco; Ligas, Paola; Bianchi, Maria Giovanna

2018-03-12

In the following we present a new non-invasive methodology aimed at the diagnosis of stone building materials used in historical buildings and architectural elements. This methodology consists of the integrated sequential application of in situ proximal sensing methodologies such as the 3D Terrestrial Laser Scanner for the 3D modelling of investigated objects together with laboratory and in situ non-invasive multi-techniques acoustic data, preceded by an accurate petrographical study of the investigated stone materials by optical and scanning electron microscopy. The increasing necessity to integrate different types of techniques in the safeguard of the Cultural Heritage is the result of the following two interdependent factors: 1) The diagnostic process on the building stone materials of monuments is increasingly focused on difficult targets in critical situations. In these cases, the diagnosis using only one type of non-invasive technique may not be sufficient to investigate the conservation status of the stone materials of the superficial and inner parts of the studied structures 2) Recent technological and scientific developments in the field of non-invasive diagnostic techniques for different types of materials favors and supports the acquisition, processing and interpretation of huge multidisciplinary datasets.

A Study of Radiation Incidence Angle in Anteroposterior Cervical Vertebra Examination

International Nuclear Information System (INIS)

Jeung, Seung Woon; Lim, Cheong Hwan; Jung, Hong Ryang; Joo, Yeong Cheol; Park, Mi Ja; Han, Beon Hee

2012-01-01

In anteroposterior projection for cervical vertebra, it is general that the incidence angle of X-ray is 15 degrees to 20 degrees to head in order to prevent overlap of mandible and occipital bone and to observe array of cervical interbody and shapes of joints. However, the angle is appropriate for foreigners that was determined by foreign literature review long ago, and there have been few researches of incidence angle for Koreans' body type. The purpose of in this study are to identify the incidence angle appropriate for Koreans and to present methodology. In order to measure the incidence angle, 1,044 patients who visited S Hospital located in Seosan were selected and measured of average length of cervical vertebra, OID, axis angle, and FID. The incidence angle was calculated from the applied formula by measuring average values per age groups and sex (see Formula 1 and 2). The average length of cervical vertebra was 6cm: the length was increased from teenagers to twenties but was decreased since thirties. The difference between males and females was around 1cm (p<.01). The OID was almost the same regardless of age groups and sex. As for axis angle, the slope was increased in teenagers and twenties, but was decreased since thirties. The difference between males and females was around 2 degrees (p<.01). The FID measurements were almost the same regardless of age groups and sex, and when the incidence angle was measured from these values, the teenagers were 15.9 degrees, the twenties were 16.9 degrees, the thirties were 16.6 degrees, the forties were 16.2 degrees, the fifties were 15.9 degrees, and the sixties were 14.5 degrees, indicating that the angle was increased from teenagers to the twenties but decreased since the thirties. While the angles of males and females were measured to be the same in the teenagers, the angle was different between males and females by 2 degrees. When the incidence angle statistically analyzed with measurement of average length of

A Study of Radiation Incidence Angle in Anteroposterior Cervical Vertebra Examination

Energy Technology Data Exchange (ETDEWEB)

Jeung, Seung Woon; Lim, Cheong Hwan; Jung, Hong Ryang; Joo, Yeong Cheol; Park, Mi Ja [Dept. of Radiological Science, Hanseo University, Seosan (Korea, Republic of); Han, Beon Hee [Dept. of Radiological Science, Seonam University, Namwon (Korea, Republic of)

2012-06-15

In anteroposterior projection for cervical vertebra, it is general that the incidence angle of X-ray is 15 degrees to 20 degrees to head in order to prevent overlap of mandible and occipital bone and to observe array of cervical interbody and shapes of joints. However, the angle is appropriate for foreigners that was determined by foreign literature review long ago, and there have been few researches of incidence angle for Koreans' body type. The purpose of in this study are to identify the incidence angle appropriate for Koreans and to present methodology. In order to measure the incidence angle, 1,044 patients who visited S Hospital located in Seosan were selected and measured of average length of cervical vertebra, OID, axis angle, and FID. The incidence angle was calculated from the applied formula by measuring average values per age groups and sex (see Formula 1 and 2). The average length of cervical vertebra was 6cm: the length was increased from teenagers to twenties but was decreased since thirties. The difference between males and females was around 1cm (p<.01). The OID was almost the same regardless of age groups and sex. As for axis angle, the slope was increased in teenagers and twenties, but was decreased since thirties. The difference between males and females was around 2 degrees (p<.01). The FID measurements were almost the same regardless of age groups and sex, and when the incidence angle was measured from these values, the teenagers were 15.9 degrees, the twenties were 16.9 degrees, the thirties were 16.6 degrees, the forties were 16.2 degrees, the fifties were 15.9 degrees, and the sixties were 14.5 degrees, indicating that the angle was increased from teenagers to the twenties but decreased since the thirties. While the angles of males and females were measured to be the same in the teenagers, the angle was different between males and females by 2 degrees. When the incidence angle statistically analyzed with measurement of average length

Nursing care of children after a traumatic incident.

Science.gov (United States)

Mulvihill, Deanna

2007-01-01

The objective of this study was to describe the nursing interventions with children and their parents to reduce the impact of a traumatic incident. A traumatic incident can be a natural disaster, a plane or car accident, or child abuse. The author has conducted an interdisciplinary integrative review of the research literature on the health impact of childhood trauma. This research is summarized and the results are synthesized and presented in a diagram that demonstrates the strong relationships that trauma has to both short and long-term health status. The impact of post-traumatic stress disorder (PTSD) and interventions to reduce its impact are described. Predictability and continuity in nursing care grounded in both routine and personnel are important. Nurses can teach self-soothing techniques and coping skills prior to using exploratory dialogue to assist the child and the parent in reviewing the traumatic incident. Nurses can also act as advocates for unsafe situations and practices, such as corporal punishment. Assessment of children for history of trauma is indicated, especially children who exhibit signs of short-term health effects. Areas for health education and future research are also presented.

Carving Technique – Methodical Perspectives

Directory of Open Access Journals (Sweden)

Adela BADAU

2015-09-01

Full Text Available The alpine skiing has undergone major changes and adjustments due to both technological innovations of materials and update of theoretical and methodological concepts on all levels of specific training. The purpose: the introduction of technological innovation in the field of materials specif ic to carving ski causes a review of methodology, aiming at bringing the execution technique to superior indices in order to obtain positive results. The event took place in Poiana Brasov between December 2014 and March 2015, on an 800m long slope and comp rised a single experimental group made of four males and four females, cadet category, that carried out two lessons per day. The tests targeted the technique level for slalom skiing and giant slalom skiing, having in view four criteria: leg work, basin mov ement, torso position and arms work. As a result of the research and of the statistic - mathematical analysis of the individual values, the giant slalom race registered an average improvement of 3.5 points between the tests, while the slalom race registered 4 points. In conclusion, the use of a specific methodology applied scientifically, which aims to select the most efficient means of action specific to children’s ski, determines technical improvement at an advanced level.

Methodology to Forecast Volume and Cost of Cancer Drugs in Low- and Middle-Income Countries

Directory of Open Access Journals (Sweden)

Yehoda M. Martei

2018-02-01

Full Text Available Purpose: In low- and middle-income countries (LMICs, frequent outages of the stock of cancer drugs undermine cancer care delivery and are potentially fatal for patients with cancer. The aim of this study is to describe a methodologic approach to forecast chemotherapy volume and estimate cost that can be readily updated and applied in most LMICs. Methods: Prerequisite data for forecasting are population-based incidence data and cost estimates per unit of drug to be ordered. We used the supplementary guidelines from the WHO list of essential medicines for cancer to predict treatment plans and ordering patterns. We used de-identified aggregate data from the Botswana National Cancer Registry to estimate incident cases. The WHO Management Sciences for Health International Price Indicator was used to estimate unit costs per drug. Results: Chemotherapy volume required for incident cancer cases was estimated as the product of the standardized dose required to complete a full treatment regimen per patient, with a given cancer diagnosis and stage, multiplied by the total number of incident cancer cases with the respective diagnosis. The estimated chemotherapy costs to treat the 10 most common cancers in the public health care sector of Botswana is approximately 2.3 million US dollars. An estimated 66% of the budget is allocated to costs of rituximab and trastuzumab alone, which are used by approximately 10% of the cancer population. Conclusion: This method provides a reproducible approach to forecast chemotherapy volume and cost in LMICs. The chemotherapy volume and cost outputs of this methodology provide key stakeholders with valuable information that can guide budget estimation, resource allocation, and drug-price negotiations for cancer treatment. Ultimately, this will minimize drug shortages or outages and reduce potential loss of lives that result from an erratic drug supply.

The Incidence of Intravascular Needle Entrance during Inferior Alveolar Nerve Block Injection

Directory of Open Access Journals (Sweden)

Sara Pourshahidi

2008-04-01

Full Text Available

Background and aims. Dentists administer thousands of local anesthetic injections every day. Injection to a highly vascular area such as pterygomandibular space during an inferior alveolar nerve block has a high risk of intravascular needle entrance. Accidental intravascular injection of local anesthetic agent with vasoconstrictor may result in cardiovascular and central nervous system toxicity, as well as tachycardia and hypertension. There are reports that indicate aspiration is not performed in every injection. The aim of the present study was to assess the incidence of intravascular needle entrance in inferior alveolar nerve block injections.

Materials and methods. Three experienced oral and maxillofacial surgeons performed 359 inferior alveolar nerve block injections using direct or indirect techniques, and reported the results of aspiration. Aspirable syringes and 27 gauge long needles were used, and the method of aspiration was similar in all cases. Data were analyzed using t-test.

Results. 15.3% of inferior alveolar nerve block injections were aspiration positive. Intravascular needle entrance was seen in 14.2% of cases using direct and 23.3% of cases using indirect block injection techniques. Of all injections, 15.8% were intravascular on the right side and 14.8% were intravascular on the left. There were no statistically significant differences between direct or indirect block injection techniques (P = 0.127 and between right and left injection sites (P = 0.778.

Conclusion. According to our findings, the incidence of intravascular needle entrance during inferior alveolar nerve block injection was relatively high. It seems that technique and maneuver of injection have no considerable effect in incidence of intravascular needle entrance.

Normal-incidence spectroscopic ellipsometry for critical dimension monitoring

International Nuclear Information System (INIS)

Huang, Hsu-Ting; Kong, Wei; Terry, Fred Lewis

2001-01-01

In this letter, we show that normal-incidence spectroscopic ellipsometry can be used for high-accuracy topography measurements on surface relief gratings. We present both experimental and theoretical results which show that spectroscopic ellipsometry or reflectance-difference spectroscopy at near-normal incidence coupled with vector diffraction theory for data analysis is capable of high-accuracy critical dimension (CD), feature height, and sidewall angle measurements in the extreme submicron regime. Quantitative comparisons of optical and cross-sectional scanning electron microscopy (SEM) topography measurements from a number of 350 nm line/space reactive-ion-etched Si gratings demonstrate the strong potential for in situ etching monitoring. This technique can be used for both ex situ and in situ applications and has the potential to replace the use of CD-SEM measurements in some applications. [copyright] 2001 American Institute of Physics

BATSE gamma-ray burst line search. 2: Bayesian consistency methodology

Science.gov (United States)

Band, D. L.; Ford, L. A.; Matteson, J. L.; Briggs, M.; Paciesas, W.; Pendleton, G.; Preece, R.; Palmer, D.; Teegarden, B.; Schaefer, B.

1994-01-01

We describe a Bayesian methodology to evaluate the consistency between the reported Ginga and Burst and Transient Source Experiment (BATSE) detections of absorption features in gamma-ray burst spectra. Currently no features have been detected by BATSE, but this methodology will still be applicable if and when such features are discovered. The Bayesian methodology permits the comparison of hypotheses regarding the two detectors' observations and makes explicit the subjective aspects of our analysis (e.g., the quantification of our confidence in detector performance). We also present non-Bayesian consistency statistics. Based on preliminary calculations of line detectability, we find that both the Bayesian and non-Bayesian techniques show that the BATSE and Ginga observations are consistent given our understanding of these detectors.

Methodological exploratory study applied to occupational epidemiology

Energy Technology Data Exchange (ETDEWEB)

Carneiro, Janete C.G. Gaburo; Vasques, MOnica Heloisa B.; Fontinele, Ricardo S.; Sordi, Gian Maria A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: janetegc@ipen.br

2007-07-01

The utilization of epidemiologic methods and techniques has been object of practical experimentation and theoretical-methodological reflection in health planning and programming process. Occupational Epidemiology is the study of the causes and prevention of diseases and injuries from exposition and risks in the work environment. In this context, there is no intention to deplete such a complex theme but to deal with basic concepts of Occupational Epidemiology, presenting the main characteristics of the analysis methods used in epidemiology, as investigate the possible determinants of exposition (chemical, physical and biological agents). For this study, the social-demographic profile of the IPEN-CNEN/SP work force was used. The knowledge of this reference population composition is based on sex, age, educational level, marital status and different occupations, aiming to know the relation between the health aggravating factors and these variables. The methodology used refers to a non-experimental research based on a theoretical methodological practice. The work performed has an exploratory character, aiming a later survey of indicators in the health area in order to analyze possible correlations related to epidemiologic issues. (author)

Methodological exploratory study applied to occupational epidemiology

International Nuclear Information System (INIS)

Carneiro, Janete C.G. Gaburo; Vasques, MOnica Heloisa B.; Fontinele, Ricardo S.; Sordi, Gian Maria A.

2007-01-01

The utilization of epidemiologic methods and techniques has been object of practical experimentation and theoretical-methodological reflection in health planning and programming process. Occupational Epidemiology is the study of the causes and prevention of diseases and injuries from exposition and risks in the work environment. In this context, there is no intention to deplete such a complex theme but to deal with basic concepts of Occupational Epidemiology, presenting the main characteristics of the analysis methods used in epidemiology, as investigate the possible determinants of exposition (chemical, physical and biological agents). For this study, the social-demographic profile of the IPEN-CNEN/SP work force was used. The knowledge of this reference population composition is based on sex, age, educational level, marital status and different occupations, aiming to know the relation between the health aggravating factors and these variables. The methodology used refers to a non-experimental research based on a theoretical methodological practice. The work performed has an exploratory character, aiming a later survey of indicators in the health area in order to analyze possible correlations related to epidemiologic issues. (author)

Tests of a grazing-incidence ring resonator free-electron laser

International Nuclear Information System (INIS)

Dowell, D.H.; Laucks, M.L.; Lowrey, A.R.; Adamski, J.L.; Pistoresi, D.J.; Shoffstall, D.R.; Bentz, M.P.; Burns, R.H.; Guha, J.; Sun, K.; Tomita, W.

1991-01-01

This paper reports on the Boeing free-electron laser (FEL) optical cavity that has been changed from a simple concentric cavity using two spherical mirrors to a larger grazing-incidence ring resonator. The new resonator consists of two mirror telescopes located at each end of the wiggler with a round-trip path length of approximately 133 m. Each telescope is a grazing-incidence hyperboloid followed by a normal-incidence paraboloid. Initial tests showed that poorly positioned ring focus and unreliable pointing alignment resulted in reduced and structured FEL output. (First lasing operation occurred on March 23 and 24, 1990.) Later efforts concentrated on improving the resonator alignment techniques and lowering the single-pass losses. FEL performance and reliability have significantly improved due to better ring alignment. The alignment procedure and recent lasing results are described. The effect the electron beam has on lasing is also discussed. Measurements are presented showing how FEL temporal output and wavelength are sensitive to electron beam energy variations

Incidents with hazardous radiation sources

International Nuclear Information System (INIS)

Schoenhacker, Stefan

2016-01-01

Incidents with hazardous radiation sources can occur in any country, even those without nuclear facilities. Preparedness for such incidents is supposed to fulfill globally agreed minimum standards. Incidents are categorized in incidents with licensed handling of radiation sources as for material testing, transport accidents of hazardous radiation sources, incidents with radionuclide batteries, incidents with satellites containing radioactive inventory, incidents wit not licensed handling of illegally acquired hazardous radiation sources. The emergency planning in Austria includes a differentiation according to the consequences: incidents with release of radioactive materials resulting in restricted contamination, incidents with release of radioactive materials resulting in local contamination, and incidents with the hazard of e@nhanced exposure due to the radiation source.

Critical incidents during prehospital cardiopulmonary resuscitation: what are the problems nobody wants to talk about?

Science.gov (United States)

Hohenstein, Christian; Rupp, Peter; Fleischmann, Thomas

2011-02-01

We wanted to identify incidents that led or could have led to patient harm during prehospital cardiopulmonary resuscitation. A nationwide anonymous and Internet-based critical incident reporting system gave the data. During a 4-year period we received 548 reports of which 74 occurred during cardiopulmonary resuscitation. Human error was responsible for 85% of the incidents, whereas equipment failure contributed to 15% of the reports. Equipment failure was considered to be preventable in 61% of all the cases, whereas incidents because of human error could have been prevented in almost all the cases. In most cases, prevention can be accomplished by simple strategies with the Poka-Yoke technique. Insufficient training of emergency medical service physicians in Germany requires special attention. The critical incident reports raise concerns regarding the level of expertize provided by emergency medical service doctors.

Methodology to estimating aquatic dispersion of effluents from accidental and routine releases

International Nuclear Information System (INIS)

Borges, Diogo da S.; Lava, Deise Diana; Guimarães, Antônio C.F.; Moreira, Maria L.

2017-01-01

This paper presents a methodology to analysis of dispersion of radioactive materials in an aquatic environment, specifically for estuaries, based on the Regulatory Guide 1.113. The objective is to present an adaptation of methodology for computational user, that it is possible by means of the use of numerical approximations techniques. The methodology to be present consist in a numerical approximation of the Navier-Stokes Equation applied in a finite medium with known transport mechanisms, such as Coriolis Effect, floor drag, diffusion, salinity, temperature difference and adhesion per water molecule. The basis of methodology is substantiated in a transport diffusive-convection equation, which has similarity with the Partial Differential Burgues' Equation for one dimension and with the Kardar-Parisi-Zhang Equation for multidimensional cases. (author)

Methodology to estimating aquatic dispersion of effluents from accidental and routine releases

Energy Technology Data Exchange (ETDEWEB)

Borges, Diogo da S.; Lava, Deise Diana; Guimarães, Antônio C.F.; Moreira, Maria L., E-mail: diogosb@outlook.com, E-mail: deise_dy@hotmail.com, E-mail: tony@ien.gov.br, E-mail: malu@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2017-07-01

This paper presents a methodology to analysis of dispersion of radioactive materials in an aquatic environment, specifically for estuaries, based on the Regulatory Guide 1.113. The objective is to present an adaptation of methodology for computational user, that it is possible by means of the use of numerical approximations techniques. The methodology to be present consist in a numerical approximation of the Navier-Stokes Equation applied in a finite medium with known transport mechanisms, such as Coriolis Effect, floor drag, diffusion, salinity, temperature difference and adhesion per water molecule. The basis of methodology is substantiated in a transport diffusive-convection equation, which has similarity with the Partial Differential Burgues' Equation for one dimension and with the Kardar-Parisi-Zhang Equation for multidimensional cases. (author)

Incidents analysis

International Nuclear Information System (INIS)

Francois, P.

1996-01-01

We undertook a study programme at the end of 1991. To start with, we performed some exploratory studies aimed at learning some preliminary lessons on this type of analysis: Assessment of the interest of probabilistic incident analysis; possibility of using PSA scenarios; skills and resources required. At the same time, EPN created a working group whose assignment was to define a new approach for analysis of incidents on NPPs. This working group gave thought to both aspects of Operating Feedback that EPN wished to improve: Analysis of significant incidents; analysis of potential consequences. We took part in the work of this group, and for the second aspects, we proposed a method based on an adaptation of the event-tree method in order to establish a link between existing PSA models and actual incidents. Since PSA provides an exhaustive database of accident scenarios applicable to the two most common types of units in France, they are obviously of interest for this sort of analysis. With this method we performed some incident analyses, and at the same time explores some methods employed abroad, particularly ASP (Accident Sequence Precursor, a method used by the NRC). Early in 1994 EDF began a systematic analysis programme. The first, transient phase will set up methods and an organizational structure. 7 figs

Incidents analysis

Energy Technology Data Exchange (ETDEWEB)

Francois, P

1997-12-31

We undertook a study programme at the end of 1991. To start with, we performed some exploratory studies aimed at learning some preliminary lessons on this type of analysis: Assessment of the interest of probabilistic incident analysis; possibility of using PSA scenarios; skills and resources required. At the same time, EPN created a working group whose assignment was to define a new approach for analysis of incidents on NPPs. This working group gave thought to both aspects of Operating Feedback that EPN wished to improve: Analysis of significant incidents; analysis of potential consequences. We took part in the work of this group, and for the second aspects, we proposed a method based on an adaptation of the event-tree method in order to establish a link between existing PSA models and actual incidents. Since PSA provides an exhaustive database of accident scenarios applicable to the two most common types of units in France, they are obviously of interest for this sort of analysis. With this method we performed some incident analyses, and at the same time explores some methods employed abroad, particularly ASP (Accident Sequence Precursor, a method used by the NRC). Early in 1994 EDF began a systematic analysis programme. The first, transient phase will set up methods and an organizational structure. 7 figs.

Study of methodology diversification in diagnostics

International Nuclear Information System (INIS)

Suda, Kazunori; Yonekawa, Tsuyoshi; Yoshikawa, Shinji; Hasegawa, Makoto

1999-03-01

There are several research activities to enhance safety and reliability of nuclear power plant operation and maintenance. We are developing a concept of an autonomous operation system where the role of operators is replaced with artificial intelligence. The purpose of the study described in this report is to develop a operator support system in abnormal plant situations. Conventionally, diagnostic modules based on individual methodology such as expert system have been developed and verified. In this report, methodology diversification is considered to integrate diagnostic modules which performance are confirmed using information processing technique. Technical issues to be considered in diagnostic methodology diversification are; 1)reliability of input data, 2)diversification of knowledge models, algorithms and reasoning schemes, 3)mutual complement and robustness. The diagnostic module utilizing the different approaches defined along with strategy of diversification was evaluated using fast breeder plant simulator. As a result, we confirmed that any singular diagnostic module can not meet accuracy criteria for the entire set of anomaly events. In contrast with this, we confirmed that every abnormality could be precisely diagnosed by a mutual combination. In other words, legitimacy of approach selected by strategy of diversification was shown, and methodology diversification attained clear efficiency for abnormal diagnosis. It has been also confirmed that the diversified diagnostic system implemented in this study is able to maintain its accuracy even in case that encountered scale of abnormality is different from reference cases embedded in the knowledge base. (author)

The IDEAL (Integrated Design and Engineering Analysis Languages) modeling methodology: Capabilities and Applications

Science.gov (United States)

Evers, Ken H.; Bachert, Robert F.

1987-01-01

The IDEAL (Integrated Design and Engineering Analysis Languages) modeling methodology has been formulated and applied over a five-year period. It has proven to be a unique, integrated approach utilizing a top-down, structured technique to define and document the system of interest; a knowledge engineering technique to collect and organize system descriptive information; a rapid prototyping technique to perform preliminary system performance analysis; and a sophisticated simulation technique to perform in-depth system performance analysis.

Methodology for assessing the impacts of distributed generation interconnection

Directory of Open Access Journals (Sweden)

Luis E. Luna

2011-06-01

Full Text Available This paper proposes a methodology for identifying and assessing the impact of distributed generation interconnection on distribution systems using Monte Carlo techniques. This methodology consists of two analysis schemes: a technical analysis, which evaluates the reliability conditions of the distribution system; on the other hand, an economic analysis that evaluates the financial impacts on the electric utility and its customers, according to the system reliability level. The proposed methodology was applied to an IEEE test distribution system, considering different operation schemes for the distributed generation interconnection. The application of each one of these schemes provided significant improvements regarding the reliability and important economic benefits for the electric utility. However, such schemes resulted in negative profitability levels for certain customers, therefore, regulatory measures and bilateral contracts were proposed which would provide a solution for this kind of problem.

Risk assessment methodology for Hanford high-level waste tanks

International Nuclear Information System (INIS)

Bott, T.F.; Mac Farlane, D.R.; Stack, D.W.; Kindinger, J.

1992-01-01

A methodology is presented for applying Probabilistic Safety Assessment techniques to quantification of the health risks posed by the high-level waste (HLW) underground tanks at the Department of Energy's Hanford reservation. This methodology includes hazard screening development of a list of potential accident initiators, systems fault trees development and quantification, definition of source terms for various release categories, and estimation of health consequences from the releases. Both airborne and liquid pathway releases to the environment, arising from aerosol and spill/leak releases from the tanks, are included in the release categories. The proposed methodology is intended to be applied to a representative subset of the total of 177 tanks, thereby providing a baseline risk profile for the HLW tank farm that can be used for setting clean-up/remediation priorities. Some preliminary results are presented for Tank 101-SY

Measuring efficiency in health care: analytic techniques and health policy

National Research Council Canada - National Science Library

Smith, Peter C; Street, Andrew; Jacobs, Rowena

2006-01-01

... the efficiency of systems and organisations, including data envelopment analysis and stochastic frontier analysis, and also presents some promising new methodological approaches. Such techniques offer the prospect of many new and fruitful insights into health care performance. Nevertheless, they also pose many practical and methodological c...

Diffusion tensor trace mapping in normal adult brain using single-shot EPI technique: A methodological study of the aging brain

International Nuclear Information System (INIS)

Chen, Z.G.; Hindmarsh, T.; Li, T.Q.

2001-01-01

Purpose: To quantify age-related changes of the average diffusion coefficient value in normal adult brain using orientation-independent diffusion tensor trace mapping and to address the methodological influences on diffusion quantification. Material and Methods: Fifty-four normal subjects (aged 20-79 years) were studied on a 1.5-T whole-body MR medical unit using a diffusion-weighted single-shot echo-planar imaging technique. Orientation-independent diffusion tensor trace maps were constructed for each subject using diffusion-weighted MR measurements in four different directions using a tetrahedral gradient combination pattern. The global average (including cerebral spinal fluid) and the tissue average of diffusion coefficients in adult brains were determined by analyzing the diffusion coefficient distribution histogram for the entire brain. Methodological influences on the measured diffusion coefficient were also investigated by comparing the results obtained using different experimental settings. Results: Both global and tissue averages of the diffusion coefficient are significantly correlated with age (p<0.03). The global average of the diffusion coefficient increases 3% per decade after the age of 40, whereas the increase in the tissue average of diffusion coefficient is about 1% per decade. Experimental settings for self-diffusion measurements, such as data acquisition methods and number of b-values, can slightly influence the statistical distribution histogram of the diffusion tensor trace and its average value. Conclusion: Increased average diffusion coefficient in adult brains with aging are consistent with findings regarding structural changes in the brain that have been associated with aging. The study also demonstrates that it is desirable to use the same experimental parameters for diffusion coefficient quantification when comparing between different subjects and groups of interest

Statistical evaluation of vibration analysis techniques

Science.gov (United States)

Milner, G. Martin; Miller, Patrice S.

1987-01-01

An evaluation methodology is presented for a selection of candidate vibration analysis techniques applicable to machinery representative of the environmental control and life support system of advanced spacecraft; illustrative results are given. Attention is given to the statistical analysis of small sample experiments, the quantification of detection performance for diverse techniques through the computation of probability of detection versus probability of false alarm, and the quantification of diagnostic performance.

Methodology for technical risk assessment

International Nuclear Information System (INIS)

Waganer, L.M.; Zuckerman, D.S.

1983-01-01

A methodology has been developed for and applied to the assessment of the technical risks associated with an evolving technology. This methodology, originally developed for fusion by K. W. Billman and F. R. Scott at EPRI, has been applied to assess the technical risk of a fuel system for a fusion reactor. Technical risk is defined as the risk that a particular technology or component which is currently under development will not achieve a set of required technical specifications (i.e. probability of failure). The individual steps in the technical risk assessment are summarized. The first step in this methodology is to clearly and completely quantify the technical requirements for the particular system being examined. The next step is to identify and define subsystems and various options which appear capable of achieving the required technical performance. The subsystem options are then characterized regarding subsystem functions, interface requirements with the subsystems and systems, important components, developmental obstacles and technical limitations. Key technical subsystem performance parameters are identified which directly or indirectly relate to the system technical specifications. Past, existing and future technical performance data from subsystem experts are obtained by using a Bayesian Interrogation technique. The input data is solicited in the form of probability functions. Thus the output performance of the system is expressed as probability functions

Pressure-sensitive paint on a truncated cone in hypersonic flow at incidences

International Nuclear Information System (INIS)

Yang, L.; Erdem, E.; Zare-Behtash, H.; Kontis, K.; Saravanan, S.

2012-01-01

Highlights: ► Global pressure map over the truncated cone is obtained at various incidence angles in Mach 5 flow. ► Successful application of AA-PSP in hypersonic flow expands operation area of this technique. ► AA-PSP reveals complex three-dimensional pattern which is difficult for transducer to obtain. ► Quantitative data provides strong correlation with colour Schlieren and oil flow results. ► High spatial resolution pressure mappings identify small scale vortices and flow separation. - Abstract: The flow over a truncated cone is a classical and fundamental problem for aerodynamic research due to its three-dimensional and complicated characteristics. The flow is made more complex when examining high angles of incidence. Recently these types of flows have drawn more attention for the purposes of drag reduction in supersonic/hypersonic flows. In the present study the flow over a truncated cone at various incidences was experimentally investigated in a Mach 5 flow with a unit Reynolds number of 13.5 × 10 6 m −1 . The cone semi-apex angle is 15° and the truncation ratio (truncated length/cone length) is 0.5. The incidence of the model varied from −12° to 12° with 3° intervals relative to the freestream direction. The external flow around the truncated cone was visualised by colour Schlieren photography, while the surface flow pattern was revealed using the oil flow method. The surface pressure distribution was measured using the anodized aluminium pressure-sensitive paint (AA-PSP) technique. Both top and sideviews of the pressure distribution on the model surface were acquired at various incidences. AA-PSP showed high pressure sensitivity and captured the complicated flow structures which correlated well with the colour Schlieren and oil flow visualisation results.

Methodology of quality control for brachytherapy {sup 125}I seeds

Energy Technology Data Exchange (ETDEWEB)

Moura, Eduardo S.; Zeituni, Carlos A.; Manzoli, Jose E.; Rostelato, Maria Elisa C.M. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: esmoura@ipen.br

2007-07-01

This paper presents the methodology of quality control of {sup 125}I seeds used for brachytherapy. The {sup 125}I seeds are millimeter titanium capsules widely used in permanent implants of prostate cancer, allowing a high dose within the tumour and a low dose on the surrounding tissues, with very low harm to the other tissues. Besides, with this procedure, the patients have a low impotence rate and a small incidence of urinary incontinence. To meet the medical standards, an efficient quality control is necessary, showing values with the minimum uncertainness possible, concerning the seeds dimensions and their respective activities. The medical needles are used to insert the seeds inside the prostate. The needles used in brachytherapy have an internal diameter of 1.0 mm, so it is necessary {sup 125}I seeds with an external maximum diameter of 0.85 mm. For the seeds and the spacer positioning on the planning sheet, the seeds must have a length between 4.5 and 5.0 mm. The activities must not vary more than 5% in each batch of {sup 125}I seeds. For this methodology, we used two ionization chamber detectors and one caliper. In this paper, the methodology using one control batch with 75 seeds manufactured by GE Health care Ltd is presented. (author)

Artificial intelligence techniques in power systems

Energy Technology Data Exchange (ETDEWEB)

Laughton, M.A.

1997-12-31

Since the early to mid 1980s much of the effort in power systems analysis has turned away from the methodology of formal mathematical modelling which came from the fields of operations research, control theory and numerical analysis to the less rigorous techniques of artificial intelligence (AI). Today the main AI techniques found in power systems applications are those utilising the logic and knowledge representations of expert systems, fuzzy systems, artificial neural networks (ANN) and, more recently, evolutionary computing. These techniques will be outlined in this chapter and the power system applications indicated. (Author)

Methodology for evaluation of alternative technologies applied to nuclear fuel reprocessing

International Nuclear Information System (INIS)

Selvaduray, G.S.; Goldstein, M.K.; Anderson, R.N.

1977-07-01

An analytic methodology has been developed to compare the performance of various nuclear fuel reprocessing techniques for advanced fuel cycle applications including low proliferation risk systems. The need to identify and to compare those processes, which have the versatility to handle the variety of fuel types expected to be in use in the next century, is becoming increasingly imperative. This methodology allows processes in any stage of development to be compared and to assess the effect of changing external conditions on the process

Wheelchair incidents

NARCIS (Netherlands)

Drongelen AW van; Roszek B; Hilbers-Modderman ESM; Kallewaard M; Wassenaar C; LGM

2002-01-01

This RIVM study was performed to gain insight into wheelchair-related incidents with powered and manual wheelchairs reported to the USA FDA, the British MDA and the Dutch Center for Quality and Usability Research of Technical Aids (KBOH). The data in the databases do not indicate that incidents with

Soil Radiological Characterisation Methodology

International Nuclear Information System (INIS)

Attiogbe, Julien; Aubonnet, Emilie; De Maquille, Laurence; De Moura, Patrick; Desnoyers, Yvon; Dubot, Didier; Feret, Bruno; Fichet, Pascal; Granier, Guy; Iooss, Bertrand; Nokhamzon, Jean-Guy; Ollivier Dehaye, Catherine; Pillette-Cousin, Lucien; Savary, Alain

2014-12-01

This report presents the general methodology and best practice approaches which combine proven existing techniques for sampling and characterisation to assess the contamination of soils prior to remediation. It is based on feedback of projects conducted by main French nuclear stakeholders involved in the field of remediation and dismantling (EDF, CEA, AREVA and IRSN). The application of this methodology will enable the project managers to obtain the elements necessary for the drawing up of files associated with remediation operations, as required by the regulatory authorities. It is applicable to each of the steps necessary for the piloting of remediation work-sites, depending on the objectives targeted (release into the public domain, re-use, etc.). The main part describes the applied statistical methodology with the exploratory analysis and variogram data, identification of singular points and their location. The results obtained permit assessment of a mapping to identify the contaminated surface and subsurface areas. It stakes the way for radiological site characterisation since the initial investigations from historical and functional analysis to check that the remediation objectives have been met. It follows an example application from the feedback of the remediation of a contaminated site on the Fontenay aux Roses facility. It is supplemented by a glossary of main terms used in the field from different publications or international standards. This technical report is a support of the ISO Standard ISO ISO/TC 85/SC 5 N 18557 'Sampling and characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes'. (authors) [fr

A review on fault classification methodologies in power transmission systems: Part-II

Directory of Open Access Journals (Sweden)

Avagaddi Prasad

2018-05-01

Full Text Available The countless extent of power systems and applications requires the improvement in suitable techniques for the fault classification in power transmission systems, to increase the efficiency of the systems and to avoid major damages. For this purpose, the technical literature proposes a large number of methods. The paper analyzes the technical literature, summarizing the most important methods that can be applied to fault classification methodologies in power transmission systems.The part 2 of the article is named “A review on fault classification methodologies in power transmission systems”. In this part 2 we discussed the advanced technologies developed by various researchers for fault classification in power transmission systems. Keywords: Transmission line protection, Protective relaying, Soft computing techniques

Multicarrier Modulation Techniques for 5G Communications

OpenAIRE

QIANYU JIN

2018-01-01

This thesis focuses on multicarrier modulation techniques for 5G wireless communications. We study different properties of current multicarrier modulation techniques and propose methodologies to improve them in order to meet the demands of 5G wireless, e.g., low out-of-band radiation, low latency, relaxed synchronization, and stable performance against phase noise with low complexity over a wireless channel.

Meta-Analytical Studies in Transport Economics. Methodology and Applications

Energy Technology Data Exchange (ETDEWEB)

Brons, M.R.E.

2006-05-18

Vast increases in the external costs of transport in the late twentieth century have caused national and international governmental bodies to worry about the sustainability of their transport systems. In this thesis we use meta-analysis as a research method to study various topics in transport economics that are relevant for sustainable transport policymaking. Meta-analysis is a research methodology that is based on the quantitative summarisation of a body of previously documented empirical evidence. In several fields of economic, meta-analysis has become a well-accepted research tool. Despite the appeal of the meta-analytical approach, there are methodological difficulties that need to be acknowledged. We study a specific methodological problem which is common in meta-analysis in economics, viz., within-study dependence caused by multiple sampling techniques. By means of Monte Carlo analysis we investigate the effect of such dependence on the performance of various multivariate estimators. In the applied part of the thesis we use and develop meta-analytical techniques to study the empirical variation in indicators of the price sensitivity of demand for aviation transport, the price sensitivity of demand for gasoline, the efficiency of urban public transport and the valuation of the external costs of noise from rail transport. We focus on the estimation of mean values for these indicators and on the identification of the impact of conditioning factors.

Proposed methodology for completion of scenario analysis for the Basalt Waste Isolation Project

International Nuclear Information System (INIS)

Roberds, W.J.; Plum, R.J.; Visca, P.J.

1984-11-01

This report presents the methodology to complete an assessment of postclosure performance, considering all credible scenarios, including the nominal case, for a proposed repository for high-level nuclear waste at the Hanford Site, Washington State. The methodology consists of defensible techniques for identifying and screening scenarios, and for then assessing the risks associated with each. The results of the scenario analysis are used to comprehensively determine system performance and/or risk for evaluation of compliance with postclosure performance criteria (10 CFR 60 and 40 CFR 191). In addition to describing the proposed methodology, this report reviews available methodologies for scenario analysis, discusses pertinent performance assessment and uncertainty concepts, advises how to implement the methodology (including the organizational requirements and a description of tasks) and recommends how to use the methodology in guiding future site characterization, analysis, and engineered subsystem design work. 36 refs., 24 figs., 1 tab

Global prevalence and incidence of traumatic spinal cord injury

Directory of Open Access Journals (Sweden)

Singh A

2014-09-01

Full Text Available Anoushka Singh*, Lindsay Tetreault*, Suhkvinder Kalsi-Ryan, Aria Nouri, Michael G FehlingsToronto Western Research Institute, Toronto Western Hospital, Toronto, Ontario, Canada  *These authors contributed equally to this paper Background: Spinal cord injury (SCI is a traumatic event that impacts a patient's physical, psychological, and social well-being and places substantial financial burden on health care systems. To determine the true impact of SCI, this systematic review aims to summarize literature reporting on either the incidence or prevalence of SCI. Methods: A systematic search was conducted using PubMed, MEDLINE, MEDLINE in process, EMBASE, Cochrane Controlled Trial Register, and Cochrane Database of Systematic Reviews to identify relevant literature published through June 2013. We sought studies that provided regional, provincial/state, or national data on the incidence of SCI or reported estimates of disease prevalence. The level of evidence of each study was rated using a scale that evaluated study design, methodology, sampling bias, and precision of estimates. Results: The initial search yielded 5,874 articles, 48 of which met the inclusion criteria. Forty-four studies estimated the incidence of SCI and nine reported the prevalence, with five discussing both. Of the incidence studies, 14 provided figures at a regional, ten at a state or provincial level and 21 at a national level. The prevalence of SCI was highest in the United States of America (906 per million and lowest in the Rhone-Alpes region, France (250 per million and Helsinki, Finland (280 per million. With respect to states and provinces in North America, the crude annual incidence of SCI was highest in Alaska (83 per million and Mississippi (77 per million and lowest in Alabama (29.4 per million, despite a large percentage of violence injuries (21.2%. Annual incidences were above 50 per million in the Hualien County in Taiwan (56.1 per million, the central Portugal

Development of standardized methodology for identifying toxins in clinical samples and fish species associated with tetrodotoxin-borne poisoning incidents

Directory of Open Access Journals (Sweden)

Tai-Yuan Chen

2016-01-01

Full Text Available Tetrodotoxin (TTX is a naturally occurring toxin in food, especially in puffer fish. TTX poisoning is observed frequently in South East Asian regions. In TTX-derived food poisoning outbreaks, the amount of TTX recovered from suspicious fish samples or leftovers, and residual levels from biological fluids of victims are typically trace. However, liquid chromatography–mass spectrometry and liquid chromatography–tandem mass spectrometry methods have been demonstrated to qualitatively and quantitatively determine TTX in clinical samples from victims. Identification and validation of the TTX-originating seafood species responsible for a food poisoning incident is needed. A polymerase chain reaction-based method on mitochondrial DNA analysis is useful for identification of fish species. This review aims to collect pertinent information available on TTX-borne food poisoning incidents with a special emphasis on the analytical methods employed for TTX detection in clinical laboratories as well as for the identification of TTX-bearing species.

Go-flow: a reliability analysis methodology applicable to piping system

International Nuclear Information System (INIS)

Matsuoka, T.; Kobayashi, M.

1985-01-01

Since the completion of the Reactor Safety Study, the use of probabilistic risk assessment technique has been becoming more widespread in the nuclear community. Several analytical methods are used for the reliability analysis of nuclear power plants. The GO methodology is one of these methods. Using the GO methodology, the authors performed a reliability analysis of the emergency decay heat removal system of the nuclear ship Mutsu, in order to examine its applicability to piping systems. By this analysis, the authors have found out some disadvantages of the GO methodology. In the GO methodology, the signal is on-to-off or off-to-on signal, therefore the GO finds out the time point at which the state of a system changes, and can not treat a system which state changes as off-on-off. Several computer runs are required to obtain the time dependent failure probability of a system. In order to overcome these disadvantages, the authors propose a new analytical methodology: GO-FLOW. In GO-FLOW, the modeling method (chart) and the calculation procedure are similar to those in the GO methodology, but the meaning of signal and time point, and the definitions of operators are essentially different. In the paper, the GO-FLOW methodology is explained and two examples of the analysis by GO-FLOW are given

Multi-criterion analysis technique in a process of quality management

OpenAIRE

A. Gwiazda

2007-01-01

Purpose: The aim of this paper is to present the critical analysis of some multi-criteria techniques applied in the area of quality management. It is strongly stated that some solutions in this scientific area characterizes the non-methodological approaches.Design/methodology/approach: The research methodology, in presented work, has been based on the theoretical analysis of the quality tools management and on the empirical researches.Findings: The proposals of improvement the main quality to...

INCIDENCE OF AMPUTATION IN EMERGENCY

Directory of Open Access Journals (Sweden)

K. Rojaramani Kumbha

2016-08-01

Full Text Available Advanced Technology and early detection of disease by recent improvements in investigation modalities lead to decreased incidents of amputations while Road Traffic Accidents (RTA increase. Furthermore, it leads to variation and decreased morbidity, mortality and accidents (crush injuries, and better equipped and trained staff, specialist services, diabetic food, rehabilitation centres, and giving good support physically and psychologically for Amputated patients. OBJECTIVE To know incidence rates of Emergency Amputation who attended causality with advanced disease and severe Trauma. METHODOLOGY The study is done over a period of one year i.e. between June 2015 to June 2016 who attended causality with advanced and severe disease affecting the limbs either due to diabetes, trauma or vascular diseases. RESULTS During one-year period, total 6,371 patients attended for general surgery OP. In those, 187 patients needed emergency surgery which included both major and minor operations. Among those, 81 patients were amputated. CONCLUSION As per our available records and observation, even though there is increased literacy and access to advanced technology, there is still increased incidence of patients undergoing amputations due to diseases. Therefore, there is a need to improve awareness and importance of early detection of diabetes, hazards of smoking, and regular general health checkups for patients at root level. With that we can treat diabetes and/or any disease in time. So there must be awareness in peripheral health staff i.e. PHC, subcentres, and community health centres about early detection of disease which in turn improves the quality of life of the patient. Due to diabetes slight injury to the glucose laden tissue may cause chronic infection and ulcer formation.(1 The tumours are seen commonly in the age group of 20-40 years after bone fusion, bones affected commonly are those around the knee (lower end of knee, upper end of tibia. A lytic

Agent-based Modeling Methodology for Analyzing Weapons Systems

Science.gov (United States)

2015-03-26

technique involve model structure, system representation and the degree of validity, coupled with the simplicity, of the overall model. ABM is best suited... system representation of the air combat system . We feel that a simulation model that combines ABM with equation-based representation of weapons and...AGENT-BASED MODELING METHODOLOGY FOR ANALYZING WEAPONS SYSTEMS THESIS Casey D. Connors, Major, USA

A methodology for the characterization and diagnosis of cognitive impairments-Application to specific language impairment.

Science.gov (United States)

Oliva, Jesús; Serrano, J Ignacio; del Castillo, M Dolores; Iglesias, Angel

2014-06-01

The diagnosis of mental disorders is in most cases very difficult because of the high heterogeneity and overlap between associated cognitive impairments. Furthermore, early and individualized diagnosis is crucial. In this paper, we propose a methodology to support the individualized characterization and diagnosis of cognitive impairments. The methodology can also be used as a test platform for existing theories on the causes of the impairments. We use computational cognitive modeling to gather information on the cognitive mechanisms underlying normal and impaired behavior. We then use this information to feed machine-learning algorithms to individually characterize the impairment and to differentiate between normal and impaired behavior. We apply the methodology to the particular case of specific language impairment (SLI) in Spanish-speaking children. The proposed methodology begins by defining a task in which normal and individuals with impairment present behavioral differences. Next we build a computational cognitive model of that task and individualize it: we build a cognitive model for each participant and optimize its parameter values to fit the behavior of each participant. Finally, we use the optimized parameter values to feed different machine learning algorithms. The methodology was applied to an existing database of 48 Spanish-speaking children (24 normal and 24 SLI children) using clustering techniques for the characterization, and different classifier techniques for the diagnosis. The characterization results show three well-differentiated groups that can be associated with the three main theories on SLI. Using a leave-one-subject-out testing methodology, all the classifiers except the DT produced sensitivity, specificity and area under curve values above 90%, reaching 100% in some cases. The results show that our methodology is able to find relevant information on the underlying cognitive mechanisms and to use it appropriately to provide better

Methodologies and applications for critical infrastructure protection: State-of-the-art

International Nuclear Information System (INIS)

Yusta, Jose M.; Correa, Gabriel J.; Lacal-Arantegui, Roberto

2011-01-01

This work provides an update of the state-of-the-art on energy security relating to critical infrastructure protection. For this purpose, this survey is based upon the conceptual view of OECD countries, and specifically in accordance with EU Directive 114/08/EC on the identification and designation of European critical infrastructures, and on the 2009 US National Infrastructure Protection Plan. The review discusses the different definitions of energy security, critical infrastructure and key resources, and shows some of the experie'nces in countries considered as international reference on the subject, including some information-sharing issues. In addition, the paper carries out a complete review of current methodologies, software applications and modelling techniques around critical infrastructure protection in accordance with their functionality in a risk management framework. The study of threats and vulnerabilities in critical infrastructure systems shows two important trends in methodologies and modelling. A first trend relates to the identification of methods, techniques, tools and diagrams to describe the current state of infrastructure. The other trend accomplishes a dynamic behaviour of the infrastructure systems by means of simulation techniques including systems dynamics, Monte Carlo simulation, multi-agent systems, etc. - Highlights: → We examine critical infrastructure protection experiences, systems and applications. → Some international experiences are reviewed, including EU EPCIP Plan and the US NIPP programme. → We discuss current methodologies and applications on critical infrastructure protection, with emphasis in electric networks.

Validating agent oriented methodology (AOM) for netlogo modelling and simulation

Science.gov (United States)

WaiShiang, Cheah; Nissom, Shane; YeeWai, Sim; Sharbini, Hamizan

2017-10-01

AOM (Agent Oriented Modeling) is a comprehensive and unified agent methodology for agent oriented software development. AOM methodology was proposed to aid developers with the introduction of technique, terminology, notation and guideline during agent systems development. Although AOM methodology is claimed to be capable of developing a complex real world system, its potential is yet to be realized and recognized by the mainstream software community and the adoption of AOM is still at its infancy. Among the reason is that there are not much case studies or success story of AOM. This paper presents two case studies on the adoption of AOM for individual based modelling and simulation. It demonstrate how the AOM is useful for epidemiology study and ecological study. Hence, it further validate the AOM in a qualitative manner.

GO-FLOW methodology. Basic concept and integrated analysis framework for its applications

International Nuclear Information System (INIS)

Matsuoka, Takeshi

2010-01-01

GO-FLOW methodology is a success oriented system analysis technique, and is capable of evaluating a large system with complex operational sequences. Recently an integrated analysis framework of the GO-FLOW has been developed for the safety evaluation of elevator systems by the Ministry of Land, Infrastructure, Transport and Tourism, Japanese Government. This paper describes (a) an Overview of the GO-FLOW methodology, (b) Procedure of treating a phased mission problem, (c) Common cause failure analysis, (d) Uncertainty analysis, and (e) Integrated analysis framework. The GO-FLOW methodology is a valuable and useful tool for system reliability analysis and has a wide range of applications. (author)

Surgery resident selection and evaluation. A critical incident study.

Science.gov (United States)

Edwards, J C; Currie, M L; Wade, T P; Kaminski, D L

1993-03-01

This article reports a study of the process of selecting and evaluating general surgery residents. In personnel psychology terms, a job analysis of general surgery was conducted using the Critical Incident Technique (CIT). The researchers collected 235 critical incidents through structured interviews with 10 general surgery faculty members and four senior residents. The researchers then directed the surgeons in a two-step process of sorting the incidents into categories and naming the categories. The final essential categories of behavior to define surgical competence were derived through discussion among the surgeons until a consensus was formed. Those categories are knowledge/self-education, clinical performance, diagnostic skills, surgical skills, communication skills, reliability, integrity, compassion, organization skills, motivation, emotional control, and personal appearance. These categories were then used to develop an interview evaluation form for selection purposes and a performance evaluation form to be used throughout residency training. Thus a continuum of evaluation was established. The categories and critical incidents were also used to structure the interview process, which has demonstrated increased interview validity and reliability in many other studies. A handbook for structuring the interviews faculty members conduct with applicants was written, and an interview training session was held with the faculty. The process of implementation of the structured selection interviews is being documented currently through qualitative research.

New approaches in intelligent control techniques, methodologies and applications

CERN Document Server

Kountchev, Roumen

2016-01-01

This volume introduces new approaches in intelligent control area from both the viewpoints of theory and application. It consists of eleven contributions by prominent authors from all over the world and an introductory chapter. This volume is strongly connected to another volume entitled "New Approaches in Intelligent Image Analysis" (Eds. Roumen Kountchev and Kazumi Nakamatsu). The chapters of this volume are self-contained and include summary, conclusion and future works. Some of the chapters introduce specific case studies of various intelligent control systems and others focus on intelligent theory based control techniques with applications. A remarkable specificity of this volume is that three chapters are dealing with intelligent control based on paraconsistent logics.

When did HIV incidence peak in Harare, Zimbabwe? Back-calculation from mortality statistics.

Directory of Open Access Journals (Sweden)

Ben Lopman

2008-03-01

Full Text Available HIV prevalence has recently begun to decline in Zimbabwe, a result of both high levels of AIDS mortality and a reduction in incident infections. An important component in understanding the dynamics in HIV prevalence is knowledge of past trends in incidence, such as when incidence peaked and at what level. However, empirical measurements of incidence over an extended time period are not available from Zimbabwe or elsewhere in sub-Saharan Africa. Using mortality data, we use a back-calculation technique to reconstruct historic trends in incidence. From AIDS mortality data, extracted from death registration in Harare, together with an estimate of survival post-infection, HIV incidence trends were reconstructed that would give rise to the observed patterns of AIDS mortality. Models were fitted assuming three parametric forms of the incidence curve and under nine different assumptions regarding combinations of trends in non-AIDS mortality and patterns of survival post-infection with HIV. HIV prevalence was forward-projected from the fitted incidence and mortality curves. Models that constrained the incidence pattern to a cubic spline function were flexible and produced well-fitting, realistic patterns of incidence. In models assuming constant levels of non-AIDS mortality, annual incidence peaked between 4 and 5% between 1988 and 1990. Under other assumptions the peak level ranged from 3 to 8% per annum. However, scenarios assuming increasing levels of non-AIDS mortality resulted in implausibly low estimates of peak prevalence (11%, whereas models with decreasing underlying crude mortality could be consistent with the prevalence and mortality data. HIV incidence is most likely to have peaked in Harare between 1988 and 1990, which may have preceded the peak elsewhere in Zimbabwe. This finding, considered alongside the timing and location of HIV prevention activities, will give insight into the decline of HIV prevalence in Zimbabwe.

Comparison of the incidence of intracranial hemorrhage in two different planning techniques for stereotactic electrode placement in the deep brain stimulation.

Science.gov (United States)

Piacentino, M; Zambon, G; Pilleri, M; Bartolomei, L

2013-03-01

Intracranial hemorrhage is an infrequent but potentially devastating complication associated with the placement of electrodes for deep brain stimulation (DBS). The objective of this retrospective review is to compare the risk of hemorrhage before and after the introduction of image-guided neuronavigation for the implant of electrodes for DBS. We reviewed all DBS implant performed at our Institute between 1998 and 2010. In 63 of the 106 patients, the targeting was based on ventriculography and merge of CT/MRI. After 2006, in the latter 43 procedures, we introduced targeting based on the merging of angio CT and MRI.. In both implant techniques, microelectrode recording (MER) was used to better define the target. All DBS procedures were performed by a single surgeon (M.P.). Patients had postoperative imaging (MRI or CT) 4-24 h following surgery. In the group of patients implanted with the first targeting technique, 3 hematomas occurred and all of them solved with sequelae (one residual weakness and two hemiplegias.) After the introduction of neuronavigator, 2 hemorrhages occurred, one solved without sequelae while the second resulted in epileptic seizures. Although the incidence of hemorrhage occurred before and after the use of neuronavigation is the same, the severity is lower in the neuronavigated procedures. Targeting based on the merging of CT angiography and MRI T1/T2 seemed to increase the safety of the lead placement reducing the risk of sequelae related to bleeding. The use of MER was not found to be correlated with an increased hemorrhage rate.

Application of quality improvement analytic methodology in emergency medicine research: A comparative evaluation.

Science.gov (United States)

Harries, Bruce; Filiatrault, Lyne; Abu-Laban, Riyad B

2018-05-30

Quality improvement (QI) analytic methodology is rarely encountered in the emergency medicine literature. We sought to comparatively apply QI design and analysis techniques to an existing data set, and discuss these techniques as an alternative to standard research methodology for evaluating a change in a process of care. We used data from a previously published randomized controlled trial on triage-nurse initiated radiography using the Ottawa ankle rules (OAR). QI analytic tools were applied to the data set from this study and evaluated comparatively against the original standard research methodology. The original study concluded that triage nurse-initiated radiographs led to a statistically significant decrease in mean emergency department length of stay. Using QI analytic methodology, we applied control charts and interpreted the results using established methods that preserved the time sequence of the data. This analysis found a compelling signal of a positive treatment effect that would have been identified after the enrolment of 58% of the original study sample, and in the 6th month of this 11-month study. Our comparative analysis demonstrates some of the potential benefits of QI analytic methodology. We found that had this approach been used in the original study, insights regarding the benefits of nurse-initiated radiography using the OAR would have been achieved earlier, and thus potentially at a lower cost. In situations where the overarching aim is to accelerate implementation of practice improvement to benefit future patients, we believe that increased consideration should be given to the use of QI analytic methodology.

Incidence of bone metastases and survival after a diagnosis of bone metastases in breast cancer patients.

Science.gov (United States)

Harries, M; Taylor, A; Holmberg, L; Agbaje, O; Garmo, H; Kabilan, S; Purushotham, A

2014-08-01

Bone is the most common metastatic site associated with breast cancer. Using a database of women with breast cancer treated at Guy's Hospital, London 1976-2006 and followed until end 2010, we determined incidence of and survival after bone metastases. We calculated cumulative incidence of bone metastases considering death without prior bone metastases as a competing risk. Risk of bone metastases was modelled through Cox-regression. Survival after bone metastases diagnosis was calculated using Kaplan-Meier methodology. Of the 7064 women, 589 (22%) developed bone metastases during 8.4 years (mean). Incidence of bone metastases was significantly higher in younger women, tumour size >5 cm, higher tumour grade, lobular carcinoma and ≥ four positive nodes, but was not affected by hormone receptor status. Median survival after bone metastases diagnosis was 2.3 years in women with bone-only metastases compared with early, and proportionately fewer patients in this group. Incidence of bone metastases has decreased but bone metastases remain a highly relevant clinical problem due to the large number of patients being diagnosed with breast cancer. Copyright © 2014 Elsevier Ltd. All rights reserved.

Numerical simulation of range and backscattering for keV protons incident on random targets

International Nuclear Information System (INIS)

Robinson, J.E.; Agamy, S.

1975-01-01

Using a Monte-Carlo technique, projected range distributions and backscattering coefficients have been calculated for keV protons normally incident on heavy targets. For an incident reduced energy range of 1 less than epsilon 0 less than 20, both the projected range distributions and backscattering coefficients have been found to be in good agreement with a third order Edgeworth range approximation. Backscattered energy and angular distributions have also been calculated and are compared to available theoretical and experimental data. (4 figs.) (U.S.)

Optimal (Solvent) Mixture Design through a Decomposition Based CAMD methodology

DEFF Research Database (Denmark)

Achenie, L.; Karunanithi, Arunprakash T.; Gani, Rafiqul

2004-01-01

Computer Aided Molecular/Mixture design (CAMD) is one of the most promising techniques for solvent design and selection. A decomposition based CAMD methodology has been formulated where the mixture design problem is solved as a series of molecular and mixture design sub-problems. This approach is...

UNCOMMON SENSORY METHODOLOGIES

Directory of Open Access Journals (Sweden)

Vladimír Vietoris

2015-02-01

Full Text Available Sensory science is the young but the rapidly developing field of the food industry. Actually, the great emphasis is given to the production of rapid techniques of data collection, the difference between consumers and trained panel is obscured and the role of sensory methodologists is to prepare the ways for evaluation, by which a lay panel (consumers can achieve identical results as a trained panel. Currently, there are several conventional methods of sensory evaluation of food (ISO standards, but more sensory laboratories are developing methodologies that are not strict enough in the selection of evaluators, their mechanism is easily understandable and the results are easily interpretable. This paper deals with mapping of marginal methods used in sensory evaluation of food (new types of profiles, CATA, TDS, napping.

Thyroid Cancer Incidence in New Jersey: Time Trend, Birth Cohort and Socioeconomic Status Analysis (1979–2006

Directory of Open Access Journals (Sweden)

Lisa M. Roche

2011-01-01

Full Text Available The study's purpose was to investigate thyroid cancer incidence time trends, birth cohort effects, and association with socioeconomic status (SES in New Jersey (NJ, a high incidence state, using NJ State Cancer Registry data. Thyroid cancer incidence rates in each sex, nearly all age groups, two major histologies and all stages significantly increased between 1979 and 2006. For each sex, age-specific incidence rates began greatly increasing in the 1924 birth cohort and, generally, the highest thyroid cancer incidence rate for each five-year age group occurred in the latest birth cohort and diagnosis period. Thyroid cancer incidence rates were significantly higher in NJ Census tracts with higher SES and in counties with a higher percentage of insured residents. These results support further investigation into the relationship between rising thyroid cancer incidence and increasing population exposure to medical (including diagnostic radiation, as well as widespread use of more sensitive diagnostic techniques.

A performance assessment methodology for high-level radioactive waste disposal in unsaturated, fractured tuff

International Nuclear Information System (INIS)

Gallegos, D.P.

1991-07-01

Sandia National Laboratories, has developed a methodology for performance assessment of deep geologic disposal of high-level nuclear waste. The applicability of this performance assessment methodology has been demonstrated for disposal in bedded salt and basalt; it has since been modified for assessment of repositories in unsaturated, fractured tuff. Changes to the methodology are primarily in the form of new or modified ground water flow and radionuclide transport codes. A new computer code, DCM3D, has been developed to model three-dimensional ground-water flow in unsaturated, fractured rock using a dual-continuum approach. The NEFTRAN 2 code has been developed to efficiently model radionuclide transport in time-dependent velocity fields, has the ability to use externally calculated pore velocities and saturations, and includes the effect of saturation dependent retardation factors. In order to use these codes together in performance-assessment-type analyses, code-coupler programs were developed to translate DCM3D output into NEFTRAN 2 input. Other portions of the performance assessment methodology were evaluated as part of modifying the methodology for tuff. The scenario methodology developed under the bedded salt program has been applied to tuff. An investigation of the applicability of uncertainty and sensitivity analysis techniques to non-linear models indicate that Monte Carlo simulation remains the most robust technique for these analyses. No changes have been recommended for the dose and health effects models, nor the biosphere transport models. 52 refs., 1 fig

Deliverable 4.1 Homogeneous LCA methodology agreed by NEPTUNE and INNOWATECH

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Hauschild, Michael Zwicky; Wenzel, Henrik

2007-01-01

In order to do a life cycle assessment (LCA) of a waste water treatment technique, a system to handle the mapped inventory data and a life cycle impact assessment (LCIA) method/model is needed. Besides NEPTUNE, another EU-funded project has the same methodology need namely INNOWATECH (contract No....... 036882) running in parallel with NEPTUNE but focusing on industrial waste water. With the aim of facilitating cooperation between the two projects a common LCA methodology framework has been worked out and is described in the following. This methodology work has been done as a joint effort between...... NEPTUNE WP4 and INNOWATECH WP4 represented by the WP4 lead partner IVL. The aim of the co-operation is to establish common methodologies and/or LCA models and/or tools in order to achieve a homogenous approach in INNOWATECH and NEPTUNE. Further, the aim is to facilitate possibilities of data exchange...

A point kernel shielding code, PKN-HP, for high energy proton incident

Energy Technology Data Exchange (ETDEWEB)

Kotegawa, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1996-06-01

A point kernel integral technique code PKN-HP, and the related thick target neutron yield data have been developed to calculate neutron and secondary gamma-ray dose equivalents in ordinary concrete and iron shields for fully stopping length C, Cu and U-238 target neutrons produced by 100 MeV-10 GeV proton incident in a 3-dimensional geometry. The comparisons among calculation results of the present code and other calculation techniques, and measured values showed the usefulness of the code. (author)

Validation of methodologies for the analysis of lead and methyl-ether in gasoline, using the techniques of atomic emission with plasma source coupled inductively and micellar liquid chromatography

International Nuclear Information System (INIS)

Redondo Escalante, M.

1995-01-01

This study established and optimized the experimental variables for the lead quantization through the Icp-Aes technique, in aqueous media. A comparative study of several proposal methods, that appears in the literature for the extraction in aqueous media of the lead in gasoline was made. It determined that it is not possible, to make this procedure using the reaction of hydrolysis of tetraethyl lead. The op tim conditions were established, for the lead quantization in gasoline, using methyl-isobutyl-ketone and also ethanol as dis solvents. The conditions of the proposed methodologies were optimized, and the variables of analytical performance were defined. It was demonstrated, that it is possible to prepare lead dissolution patterns, in organic media, starting from inorganic salts of this metal. The techniques of chromatography of gases and of liquid chromatography of high pressure, in the analysis of methyl-ter butyl-ether (Mtbe), were compared. It demonstrated that it is possible, to quantize the Mtbe through the HPLC technique, and it found that the 'micellar' liquid chromatography. (author) [es

Breast cancer statistics and prediction methodology: a systematic review and analysis.

Science.gov (United States)

Dubey, Ashutosh Kumar; Gupta, Umesh; Jain, Sonal

2015-01-01

Breast cancer is a menacing cancer, primarily affecting women. Continuous research is going on for detecting breast cancer in the early stage as the possibility of cure in early stages is bright. There are two main objectives of this current study, first establish statistics for breast cancer and second to find methodologies which can be helpful in the early stage detection of the breast cancer based on previous studies. The breast cancer statistics for incidence and mortality of the UK, US, India and Egypt were considered for this study. The finding of this study proved that the overall mortality rates of the UK and US have been improved because of awareness, improved medical technology and screening, but in case of India and Egypt the condition is less positive because of lack of awareness. The methodological findings of this study suggest a combined framework based on data mining and evolutionary algorithms. It provides a strong bridge in improving the classification and detection accuracy of breast cancer data.

IS THERE A NEED FOR THE POST-NON-CLASSICAL METHODOLOGY IN PEDAGOGY?

Directory of Open Access Journals (Sweden)

Vladislav L. Benin

2014-01-01

Full Text Available  The publication continues the discussion, started by Yu.V. Larina in ≪Education in Search of the Congruity Principle≫ concerning the modern methodology of pedagogical science; and identifies the criteria of the given principle along with the limitations of the post-non-classical approaches to the humanities.Methods: The methodology involves the analysis of existing view points, formalization of characteristics of post-non-classical science, and reflection of pedagogical principle of cultural conformity.Results: The research outcomes demonstrate that the gradual undermining of the fundamental science results in erosion of methodological background. In case of interdisciplinary subjects, a researcher is forced to integrate different methods and techniques, which provokes further disruption of the methodology.Scientific novelty: The author classifies and extrapolates to the humanities sphere the main characteristics of post-non-classical science; and makes a conclusion about the gradual decline of researchers’ training quality due to the lack of methodological clarity, and aggressive forms of science vulgarization leading to spontaneous development of clipping methodology.The practical significance: Implementation of the research findings can activate both theoretical and methodological aspects of teacher’s training and selfeducation.

Methodological proposal for studying suicide as a complex phenomenon

Directory of Open Access Journals (Sweden)

Minayo Maria Cecília de Souza

2006-01-01

Full Text Available The authors present a methodological proposal for studying suicide and suicide attempts from a combined socio-anthropological, epidemiological, and psychosocial perspective. This interdisciplinary and complex research model simultaneously examined individual, socioeconomic, historical/cultural, and population data as few studies have succeeded to date. Considering that the present study was conducted in a specific social reality, the authors created a methodological approach to comprehend the effects of a crisis in an industrial restructuring process in a mining company town in the State of Minas Gerais, Brazil, that was associated with unusually high suicide rates. Since it referred to a small geographic area (with only 100,000 inhabitants, the research is considered an ideal case study. The authors created different strategies to trace the local epidemiological profile, adapted a psychosocial autopsy technique to elucidate suicide cases and a psychosocial harm assessment technique to comprehend suicide attempts, and conducted a local analysis of the socio-cultural context. The methods proposed here (with advantages and limitations proved productive for elucidating the study hypothesis.

Investigating surety methodologies for cognitive systems.

Energy Technology Data Exchange (ETDEWEB)

Caudell, Thomas P. (University of New Mexico, Albuquerque, NM); Peercy, David Eugene; Mills, Kristy (University of New Mexico, Albuquerque, NM); Caldera, Eva (University of New Mexico, Albuquerque, NM)

2006-11-01

Advances in cognitive science provide a foundation for new tools that promise to advance human capabilities with significant positive impacts. As with any new technology breakthrough, associated technical and non-technical risks are involved. Sandia has mitigated both technical and non-technical risks by applying advanced surety methodologies in such areas as nuclear weapons, nuclear reactor safety, nuclear materials transport, and energy systems. In order to apply surety to the development of cognitive systems, we must understand the concepts and principles that characterize the certainty of a system's operation as well as the risk areas of cognitive sciences. This SAND report documents a preliminary spectrum of risks involved with cognitive sciences, and identifies some surety methodologies that can be applied to potentially mitigate such risks. Some potential areas for further study are recommended. In particular, a recommendation is made to develop a cognitive systems epistemology framework for more detailed study of these risk areas and applications of surety methods and techniques.

Mining software specifications methodologies and applications

CERN Document Server

Lo, David

2011-01-01

An emerging topic in software engineering and data mining, specification mining tackles software maintenance and reliability issues that cost economies billions of dollars each year. The first unified reference on the subject, Mining Software Specifications: Methodologies and Applications describes recent approaches for mining specifications of software systems. Experts in the field illustrate how to apply state-of-the-art data mining and machine learning techniques to address software engineering concerns. In the first set of chapters, the book introduces a number of studies on mining finite

Investigation of drum pressurization incident in the 331 Building, Room 175 on January 10, 1995

International Nuclear Information System (INIS)

Pollari, R.A.

1995-02-01

On January 10, 1995, a pressurized drum incident occurred at the 331 Building, Room 175. On January 12, 1995, the Manager of the Life Sciences Center appointed members to an Investigation Board to investigate the incident (see Exhibit A). This incident was initially categorized as an Off-Normal Occurrence, but was later elevated to an Unusual Occurrence by the Occurrence Classifier. The scope of this investigation was to employ a formal method of root cause analysis, identify the methodology, and report the results of the analysis, fully explaining the technical elements of the causal sequence along with a description of the barriers that should have or could have prevented the occurrence. During the course of the investigation, the scene of the event was not accessible. Therefore, the investigation relied primarily on testimony from staff members directly involved and their management. In addition, other outside professionals were also consulted. The Investigation Board visited the previous location of the drum, 331A Building, Room 9; Room 173, which fronts room 175, was also visited. The Investigation Board reviewed selected documents, which are also listed

The development of digital monitoring technique

International Nuclear Information System (INIS)

Koo, In Soo; Kim, D. H.; Kim, J. S.; Kim, C. H.; Kim, G. O.; Park, H. Y.; Suh, S. Y.; Sung, S. H.; Song, S. J.; Lee, C. K.; Jang, G. S.; Hur, S.

1997-08-01

A study has been performed for advanced DSP technology for the digital nuclear I and C systems for the monitoring and diagnosis techniques for high-pressurized structures integrity in NSSS. In the development of advanced DSP technology, real time process, communication network and signal validation were selected as the essential technologies of the digital signal process, and the requirements and methodology for the application of these technologies in NPP were established through technical analysis. Based on its results, the DPIS and the signal validation algorithm were developed. For the real-time process, the necessary requirements were define and the methodology of real-time software modeling was developed. For the communication network, the methodology of selection of the communication technique and developing procedure were established with an extraction of requirements. Functions, requirements, structure and technical specification were developed for the DPIS, and a real-time signal validation algorithm was developed and implemented for the signal validation. In a study on monitoring techniques for abnormal conditions, test and experimental facilities have been set up in order to carry out the required tests during research activities. Studies concentrated on how to acquire proper vibration or emission signals from mechanical structures and equipments, and to diagnose effectively the abnormal conditions of high pressure structure integrity. The algorithms of automatic signal analysis and diagnosis for abnormal conditions have been developed in this study to assist the operator's monitoring and diagnosis activities on structure integrity using new technologies. (author). 23 refs., 68 tabs., 196 figs

The development of digital monitoring technique

Energy Technology Data Exchange (ETDEWEB)

Koo, In Soo; Kim, D. H.; Kim, J. S.; Kim, C. H.; Kim, G. O.; Park, H. Y.; Suh, S. Y.; Sung, S. H.; Song, S. J.; Lee, C. K.; Jang, G. S.; Hur, S.

1997-08-01

A study has been performed for advanced DSP technology for the digital nuclear I and C systems for the monitoring and diagnosis techniques for high-pressurized structures integrity in NSSS. In the development of advanced DSP technology, real time process, communication network and signal validation were selected as the essential technologies of the digital signal process, and the requirements and methodology for the application of these technologies in NPP were established through technical analysis. Based on its results, the DPIS and the signal validation algorithm were developed. For the real-time process, the necessary requirements were define and the methodology of real-time software modeling was developed. For the communication network, the methodology of selection of the communication technique and developing procedure were established with an extraction of requirements. Functions, requirements, structure and technical specification were developed for the DPIS, and a real-time signal validation algorithm was developed and implemented for the signal validation. In a study on monitoring techniques for abnormal conditions, test and experimental facilities have been set up in order to carry out the required tests during research activities. Studies concentrated on how to acquire proper vibration or emission signals from mechanical structures and equipments, and to diagnose effectively the abnormal conditions of high pressure structure integrity. The algorithms of automatic signal analysis and diagnosis for abnormal conditions have been developed in this study to assist the operator`s monitoring and diagnosis activities on structure integrity using new technologies. (author). 23 refs., 68 tabs., 196 figs.

Sucevița Monastery – The overpainting from narthex and exonarthex. Technique of execution and the methodology of removal

Directory of Open Access Journals (Sweden)

Georgiana Zahariea

2015-11-01

Full Text Available The overpaintings found on the frescoes from Sucevița Monastery, date from periods that remain uncertain due to the rarity of written documents. Probably they were made because of the degradations that occurred in time or because of tastes. These interventions are made in oil technique or tempera, for that reason we can date them around the 19th century when there was this tendency of painting Orthodox churches in oil. The overpaintings are placed in key position, on the lunette, facilitating access from exonarthex to the narthex or from narthex to the tomb room. In terms of iconography, the overpaintings covered representations like: Anastasis / the Ressurection; The Holy Trinity of the New Testament and Virgin Mary with the thief represented in heaven (detail from the Last Judgement. The present paper tries to make a comparison among the three surfaces with overpainting, bringing technical arguments regarding the differences between them. At the same time, the paper presents details about the methodology applied to cleanning the overpaintings and it highlights the original image that can bring nuances in the iconographic interpretation.

Development of imaging techniques to study the pathogenesis of biosafety level 2/3 infectious agents.

Science.gov (United States)

Rella, Courtney E; Ruel, Nancy; Eugenin, Eliseo A

2014-12-01

Despite significant advances in microbiology and molecular biology over the last decades, several infectious diseases remain global concerns, resulting in the death of millions of people worldwide each year. According to the Center for Disease Control (CDC) in 2012, there were 34 million people infected with HIV, 8.7 million new cases of tuberculosis, 500 million cases of hepatitis, and 50-100 million people infected with dengue. Several of these pathogens, despite high incidence, do not have reliable clinical detection methods. New or improved protocols have been generated to enhance detection and quantitation of several pathogens using high-end microscopy (light, confocal, and STORM microscopy) and imaging software. In the current manuscript, we discuss these approaches and the theories behind these methodologies. Thus, advances in imaging techniques will open new possibilities to discover therapeutic interventions to reduce or eliminate the devastating consequences of infectious diseases. © 2014 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.

Small area mapping of domestic radon, smoking prevalence and lung cancer incidence – A case study in Northamptonshire, UK

International Nuclear Information System (INIS)

Denman, Antony R.; Rogers, Stephen; Ali, Akeem; Sinclair, John; Phillips, Paul S.; Crockett, Robin G.M.; Groves-Kirkby, Christopher J.

2015-01-01

Smoking and radon both cause lung cancer, and together the risk is significantly higher. UK public health campaigns continue to reduce smoking prevalence, and other initiatives identify houses with raised radon (radon-222) levels and encourage remedial action. Smoking prevalence and radon levels in the UK have been mapped at Primary Care Trust level. This paper extends that work, using a commercial socio-demographic database to estimate smoking prevalence at the postcode sector level, and to predict the population characteristics at postcode sector level for 87 postcode sectors in Northamptonshire. Likely smoking prevalence in each postcode sector is then modelled from estimates of the smoking prevalence in the different socio-economic groups used by the database. Mapping estimated smoking prevalence, radon potential and average lung cancer incidence for each postcode sector suggested that there was little correlation between smoking prevalence and radon levels, as radon potential was generally lower in urban areas in Northamptonshire, where the estimates of smoking prevalence were highest. However, the analysis demonstrated some sectors where both radon potential and smoking prevalence were moderately raised. This study showed the potential of this methodology to map estimated smoking prevalence and radon levels to inform locally targeted public health campaigns to reduce lung cancer incidence. - Highlights: • We use a commercial socio-demographic database to estimate smoking prevalence in small areas in Northamptonshire, UK. • We map the estimated smoking prevalence and average domestic radon levels in these small areas. • We estimate annual average lung cancer incidence in these small areas. • The methodology is useful to evaluate and plan localised public health campaigns to reduce lung cancer incidence.

Incident Information Management Tool

CERN Document Server

Pejovic, Vladimir

2015-01-01

Flaws of\tcurrent incident information management at CMS and CERN\tare discussed. A new data\tmodel for future incident database is\tproposed and briefly described. Recently developed draft version of GIS-­‐based tool for incident tracking is presented.

Detection limit calculations for different total reflection techniques

International Nuclear Information System (INIS)

Sanchez, H.J.

2000-01-01

In this work, theoretical calculations of detection limits for different total-reflection techniques are presented.. Calculations include grazing incidence (TXRF) and gracing exit (GEXRF) conditions. These calculations are compared with detection limits obtained for conventional x-ray fluorescence (XRF). In order to compute detection limits the Shiraiwa and Fujino's model to calculate x-ray fluorescence intensities was used. This model made certain assumptions and approximations to achieve the calculations, specially in the case of the geometrical conditions of the sample, and the incident and takeoff beams. Nevertheless the calculated data of detection limits for conventional XRF and total-reflection XRF show a good agreement with previous results. The model proposed here allows to analyze the different sources of background and the influence of the excitation geometry, which contribute to the understanding of the physical processes involved in the XRF analysis by total reflection. Finally, a comparison between detection limits in total-reflection analysis at grazing incidence and at grazing exit is carried out. Here a good agreement with the theoretical predictions of the reversibility principle is found, showing that detection limits are similar for both techniques. (author)

Abnormal condition and events analysis for instrumentation and control systems. Volume 1: Methodology for nuclear power plant digital upgrades. Final report

International Nuclear Information System (INIS)

McKemy, S.; Marcelli, M.; Boehmer, N.; Crandall, D.

1996-01-01

The ACES project was initiated to identify a cost-effective methodology for addressing abnormal conditions and events (ACES) in digital upgrades to nuclear power plant systems, as introduced by IEEE Standard 7-4.3.2-1993. Several methodologies and techniques currently in use in the defense, aerospace, and other communities for the assurance of digital safety systems were surveyed, and although several were shown to possess desirable qualities, non sufficiently met the needs of the nuclear power industry. This report describes a tailorable methodology for performing ACES analysis that is based on the more desirable aspects of the reviewed methodologies and techniques. The methodology is applicable to both safety- and non-safety-grade systems, addresses hardware, software, and system-level concerns, and can be applied in either a lifecycle or post-design timeframe. Employing this methodology for safety systems should facilitate the digital upgrade licensing process

Percutaneous Dilatational Tracheostomy via Griggs Technique.

Science.gov (United States)

Karimpour, Hasan Ali; Vafaii, Kamran; Chalechale, Maryam; Mohammadi, Saeed; Kaviannezhad, Rasool

2017-01-01

Tracheostomy is considered the airway management of choice for patients who need prolonged mechanical ventilation support. Percutaneous Dilatational Tracheotomy (PDT) is a technique that can be performed easily and rapidly at bedside and is particularly useful in the intensive care setting. The Griggs percutaneous tracheotomy is unique in its utilization of a guide wire dilator forceps. We aimed to describe the early perioperative and late postoperative complications of PDT using the Griggs technique in patients in the intensive care unit (ICU). This cross-sectional study was conducted on all patients who underwent tracheostomy in the ICU of the Imam Reza Hospital of Kermanshah, Iran, from June 2011 to June 2015. PDT was performed in 184 patients with the Griggs technique. Demographic variables, as well as perioperative and late postoperative complications were recorded. The mean age of patients was 57.3 ± 15.37 years. The most common primary causes of tracheostomy were hypoxic brain damage disorders (43.2%) and pneumonia (14.8%). Perioperative and early complications occurred in 16.7 % of procedures, of which 9.3% were bleedings (minor, significant and major). Furthermore, the incidence of late complications was 8.6%, including: stomal infection, difficult replace tracheostomy tube, tracheoesophageal fistula, tracheal stenosis, and tracheomalacia. PDT via Griggs technique is a safe, quick, and effective method. The low incidence of complications indicates that bedside percutaneous tracheostomy can be performed safely as a routine procedure for daily care implemented in the ICU.

Current methodologies for assessing seismically induced settlements in soil

International Nuclear Information System (INIS)

Ledbetter, R.

1983-08-01

Earthquake-induced surface settlements have ranged from 0.7 to 10 percent of layer thickness for the relatively few incidences where reliable estimates have been made of settlement magnitudes and soil conditions. Standard penetration test results obtained for pre-earthquake and postearthquake conditions in Japan show that relative densities have changed from 188 percent increase to 44 percent decrease. At present, there are no verified methods of seismic settlement analysis. However, there are current methods of analysis ranging from empirical to fully theoretical, which take into account a few to all of the major variables affecting seismically induced settlement behavior. This report reviews pertinent current knowledge and methodologies related to this subject. 69 references, 9 figures

Radiological incidents in radiotherapy

International Nuclear Information System (INIS)

Hobzova, L.; Novotny, J.

2008-01-01

In many countries a reporting system of radiological incidents to national regulatory body exists and providers of radiotherapy treatment are obliged to report all major and/or in some countries all incidents occurring in institution. State Office for Nuclear Safety (SONS) is providing a systematic guidance for radiotherapy departments from 1997 by requiring inclusion of radiation safety problems into Quality assurance manual, which is the basic document for obtaining a license of SONS for handling with sources of ionizing radiation. For that purpose SONS also issued the recommendation 'Introduction of QA system for important sources in radiotherapy-radiological incidents' in which the radiological incidents are defined and the basic guidance for their classification (category A, B, C, D), investigation and reporting are given. At regular periods the SONS in co-operation with radiotherapy centers is making a survey of all radiological incidents occurring in institutions and it is presenting obtained information in synoptic communication (2003 Motolske dny, 2005 Novy Jicin). This presentation is another summary report of radiological incidents that occurred in our radiotherapy institutions during last 3 years. Emphasis is given not only to survey and statistics, but also to analysis of reasons of the radiological incidents and to their detection and prevention. Analyses of incidents in radiotherapy have led to a much broader understanding of incident causation. Information about the error should be shared as early as possible during or after investigation by all radiotherapy centers. Learning from incidents, errors and near misses should be a part of improvement of the QA system in institutions. Generally, it is recommended that all radiotherapy facilities should participate in the reporting, analyzing and learning system to facilitate the dissemination of knowledge throughout the whole country to prevent errors in radiotherapy.(authors)

Study of possibility using LANL PSA-methodology for accident probability RBMK researches

International Nuclear Information System (INIS)

Petrin, S.V.; Yuferev, V.Y.; Zlobin, A.M.

1995-01-01

The reactor facility probabilistic safety analysis methodologies are considered which are used at U.S. LANL and RF NIKIET. The methodologies are compared in order to reveal their similarity and differences, determine possibilities of using the LANL technique for RBMK type reactor safety analysis. It is found that at the PSA-1 level the methodologies practically do not differ. At LANL the PHA, HAZOP hazards analysis methods are used for more complete specification of the accounted initial event list which can be also useful at performance of PSA for RBMK. Exchange of information regarding the methodology of detection of dependent faults and consideration of human factor impact on reactor safety is reasonable. It is accepted as useful to make a comparative study result analysis for test problems or PSA fragments using various computer programs employed at NIKIET and LANL

Methodological optimization of tinnitus assessment using prepulse inhibition of the acoustic startle reflex.

Science.gov (United States)

Longenecker, R J; Galazyuk, A V

2012-11-16

Recently prepulse inhibition of the acoustic startle reflex (ASR) became a popular technique for tinnitus assessment in laboratory animals. This method confers a significant advantage over the previously used time-consuming behavioral approaches utilizing basic mechanisms of conditioning. Although this technique has been successfully used to assess tinnitus in different laboratory animals, many of the finer details of this methodology have not been described enough to be replicated, but are critical for tinnitus assessment. Here we provide detail description of key procedures and methodological issues that provide guidance for newcomers with the process of learning to correctly apply gap detection techniques for tinnitus assessment in laboratory animals. The major categories of these issues include: refinement of hardware for best performance, optimization of stimulus parameters, behavioral considerations, and identification of optimal strategies for data analysis. This article is part of a Special Issue entitled: Tinnitus Neuroscience. Copyright © 2012. Published by Elsevier B.V.

EnergiTools. A methodology for performance monitoring and diagnosis

International Nuclear Information System (INIS)

Ancion, P.; Bastien, R.; Ringdahl, K.

2000-01-01

EnergiTools is a performance monitoring and diagnostic tool that combines the power of on-line process data acquisition with advanced diagnosis methodologies. Analytical models based on thermodynamic principles are combined with neural networks to validate sensor data and to estimate missing or faulty measurements. Advanced diagnostic technologies are then applied to point out potential faults and areas to be investigated further. The diagnosis methodologies are based on Bayesian belief networks. Expert knowledge is captured in the form of the fault-symptom relationships and includes historical information as the likelihood of faults and symptoms. The methodology produces the likelihood of component failure root causes using the expert knowledge base. EnergiTools is used at Ringhals nuclear power plants. It has led to the diagnosis of various performance issues. Three case studies based on this plant data and model are presented and illustrate the diagnosis support methodologies implemented in EnergiTools . In the first case, the analytical data qualification technique points out several faulty measurements. The application of a neural network for the estimation of the nuclear reactor power by interpreting several plant indicators is then illustrated. The use of the Bayesian belief networks is finally described. (author)

Health professionals' beliefs about domestic abuse and the issue of disclosure: a critical incident technique study.

Science.gov (United States)

Taylor, Julie; Bradbury-Jones, Caroline; Kroll, Thilo; Duncan, Fiona

2013-09-01

Domestic abuse is increasingly recognised as a serious, worldwide public health concern. There is a significant body of literature regarding domestic abuse, but little is known about health professionals' beliefs about domestic abuse disclosure. In addition, the intersection between health professionals' beliefs and abused women's views remains uninvestigated. We report on a two-phase, qualitative study using Critical Incident Technique (CIT) that aimed to explore community health professionals' beliefs about domestic abuse and the issue of disclosure. We investigated this from the perspectives of both health professionals and abused women. The study took place in Scotland during 2011. The study was informed theoretically by the Common Sense Model of Self-Regulation of Health and Illness (CSM). This model is typically used in disease-orientated research. In our innovative use, however, CSM was used to study the social phenomenon, domestic abuse. The study involved semi-structured, individual CIT interviews with health professionals and focus groups with women who had experienced domestic abuse. Twenty-nine health professionals (Midwives, Health Visitors and General Practitioners) participated in the first phase of the study. In the second phase, three focus groups were conducted with a total of 14 women. Data were analysed using a combination of an inductive classification and framework analysis. Findings highlight the points of convergence and divergence between abused women's and health professionals' beliefs about abuse. Although there was some agreement, they do not always share the same views. For example, women want to be asked about abuse, but many health professionals do not feel confident or comfortable discussing the issue. Overall, the study shows the dynamic interaction between women's and health professionals' beliefs about domestic abuse and readiness to discuss and respond to it. Understanding these complex dynamics assists in the employment of

The selection of probabilistic safety assessment techniques for non-reactor nuclear facilities

International Nuclear Information System (INIS)

Vail, J.

1992-01-01

Historically, the probabilistic safety assessment (PSA) methodology of choice is the well known event tree/fault tree inductive technique. For reactor facilities is has stood the test of time. Some non-reactor nuclear facilities have found inductive methodologies difficult to apply. The stand-alone fault tree deductive technique has been used effectively to analyze risk in nuclear chemical processing facilities and waste handling facilities. The selection between the two choices suggest benefits from use of the deductive method for non-reactor facilities

Hybrid probabilistic and possibilistic safety assessment. Methodology and application

International Nuclear Information System (INIS)

Kato, Kazuyuki; Amano, Osamu; Ueda, Hiroyoshi; Ikeda, Takao; Yoshida, Hideji; Takase, Hiroyasu

2002-01-01

This paper presents a unified methodology to handle variability and ignorance by using probabilistic and possibilistic techniques respectively. The methodology has been applied to the safety assessment of geological disposal of high-level radioactive waste. Uncertainties associated with scenarios, models and parameters were defined in terms of fuzzy membership functions derived through a series of interviews to the experts, while variability was formulated by means of probability density functions (pdfs) based on available data sets. The exercise demonstrated the applicability of the new methodology and, in particular, its advantage in quantifying uncertainties based on expert opinion and in providing information on the dependence of assessment results on the level of conservatism. In addition, it was shown that sensitivity analysis can identify key parameters contributing to uncertainties associated with results of the overall assessment. The information mentioned above can be utilized to support decision-making and to guide the process of disposal system development and optimization of protection against potential exposure. (author)

HEKATE—A novel grazing incidence neutron scattering concept for the European Spallation Source

Science.gov (United States)

Glavic, Artur; Stahn, Jochen

2018-03-01

Structure and magnetism at surfaces and buried interfaces on the nanoscale can only be accessed by few techniques, one of which is grazing incidence neutron scattering. While the technique has its strongest limitation in a low signal and large background, due to the low scattering probability and need for high resolution, it can be expected that the high intensity of the European Spallation Source in Lund, Sweden, will make many more such studies possible, warranting a dedicated beamline for this technique. We present an instrument concept, Highly Extended K range And Tunable Experiment (HEKATE), for surface scattering that combines the advantages of two Selene neutron guides with unique capabilities of spatially separated distinct wavelength frames. With this combination, it is not only possible to measure large specular reflectometry ranges, even on free liquid surfaces, but also to use two independent incident beams with tunable sizes and resolutions that can be optimized for the specifics of the investigated samples. Further the instrument guide geometry is tuned for reduction of high energy particle background and only uses low to moderate supermirror coatings for high reliability and affordable cost.

HEKATE-A novel grazing incidence neutron scattering concept for the European Spallation Source.

Science.gov (United States)

Glavic, Artur; Stahn, Jochen

2018-03-01

Structure and magnetism at surfaces and buried interfaces on the nanoscale can only be accessed by few techniques, one of which is grazing incidence neutron scattering. While the technique has its strongest limitation in a low signal and large background, due to the low scattering probability and need for high resolution, it can be expected that the high intensity of the European Spallation Source in Lund, Sweden, will make many more such studies possible, warranting a dedicated beamline for this technique. We present an instrument concept, Highly Extended K range And Tunable Experiment (HEKATE), for surface scattering that combines the advantages of two Selene neutron guides with unique capabilities of spatially separated distinct wavelength frames. With this combination, it is not only possible to measure large specular reflectometry ranges, even on free liquid surfaces, but also to use two independent incident beams with tunable sizes and resolutions that can be optimized for the specifics of the investigated samples. Further the instrument guide geometry is tuned for reduction of high energy particle background and only uses low to moderate supermirror coatings for high reliability and affordable cost.

A technology-assessment methodology for electric utility planning: With application to nuclear power plant decommissioning

International Nuclear Information System (INIS)

Lough, W.T.

1987-01-01

Electric utilities and public service commissions have not taken full advantage of the many proven methodologies and techniques available for evaluating complex technological issues. In addition, evaluations performed are deficient in their use of (1) methods for evaluating public attitudes and (2) formal methods of analysis for decision making. These oversight are substantiated through an examination of the literature relevant to electric utility planning. The assessment process known as technology assessment or TA is proposed, and a TA model is developed for route in use in utility planning by electric utilities and state regulatory commissions. Techniques to facilitate public participation and techniques to aid decision making are integral to the proposed model and are described in detail. Criteria are provided for selecting an appropriate technique on a case-by-case basis. The TA model proved to be an effective methodology for evaluating technological issues associated with electric utility planning such as decommissioning nuclear power plants. Through the use of the nominal group technique, the attitudes of a group of residential ratepayers were successfully identified and included in the decision-making process

The Incidence of Postoperative Pneumonia in Various Surgical Subspecialties: A Dual Database Analysis.

Science.gov (United States)

Chughtai, Morad; Gwam, Chukwuweike U; Khlopas, Anton; Newman, Jared M; Curtis, Gannon L; Torres, Pedro A; Khan, Rafay; Mont, Michael A

2017-07-25

underwent general surgery, neurosurgery, spine surgery, orthopaedic surgery, and ENT surgery had a postoperative pneumonia incidence of 1.1%, 0.6%, 0.5%, 0.5%, and 0.4%, respectively. Overall trend analysis demonstrated a statistically significant decrease in postoperative pneumonia incidence (p surgeries that occurred between 2009 and 2013 was 1.3%. The incidences of postoperative pneumonia were highest among patients who underwent cardiothoracic surgery (5.3%), general surgery (1.4%), and neurosurgery (1.4%). The incidences of postoperative pneumonia in patients who underwent ENT surgery, orthopedic surgery, and urologic surgery were 0.7%, respectively. Overall trend analysis demonstrated a statistically significant increase in postoperative pneumonia incidence for patients undergoing cardiothoracic surgery (p surgery had the highest incidence in both databases. Furthermore, cardiothoracic surgery appeared to have an increasing trend in incidence. Standardizing and implementing accurate coding methodologies for this complication are needed for a more accurate assessment of this burdensome complication. Future studies should assess interventions, such as oral cleansing and suctioning, incentive spirometry, as well as designated institution-based pneumonia prevention programs and protocols to help prevent and mitigate the occurrence of this complication.

Safety on Judo Children: Methodology and Results

OpenAIRE

Sacripanti, Attilio; De Blasis, Tania

2017-01-01

Many doctors although they have not firsthand experience of judo, describe it as a sport unsuitable for children. Theoretically speaking falls derived by Judo throwing techniques,could be potentially dangerous,especially for kids,if poorly managed.A lot of researches were focalized on trauma or injuries taking place in judo, both during training and competition The goal of this Research is to define and apply a scientific methodology to evaluate the hazard in falls by judo throws for children...

A methodology to assess the economic impact of power storage technologies.

Science.gov (United States)

El-Ghandour, Laila; Johnson, Timothy C

2017-08-13

We present a methodology for assessing the economic impact of power storage technologies. The methodology is founded on classical approaches to the optimal stopping of stochastic processes but involves an innovation that circumvents the need to, ex ante , identify the form of a driving process and works directly on observed data, avoiding model risks. Power storage is regarded as a complement to the intermittent output of renewable energy generators and is therefore important in contributing to the reduction of carbon-intensive power generation. Our aim is to present a methodology suitable for use by policy makers that is simple to maintain, adaptable to different technologies and easy to interpret. The methodology has benefits over current techniques and is able to value, by identifying a viable optimal operational strategy, a conceived storage facility based on compressed air technology operating in the UK.This article is part of the themed issue 'Energy management: flexibility, risk and optimization'. © 2017 The Author(s).

Predicting human miRNA target genes using a novel evolutionary methodology

KAUST Repository

Aigli, Korfiati; Kleftogiannis, Dimitrios A.; Konstantinos, Theofilatos; Spiros, Likothanassis; Athanasios, Tsakalidis; Seferina, Mavroudi

2012-01-01

The discovery of miRNAs had great impacts on traditional biology. Typically, miRNAs have the potential to bind to the 3'untraslated region (UTR) of their mRNA target genes for cleavage or translational repression. The experimental identification of their targets has many drawbacks including cost, time and low specificity and these are the reasons why many computational approaches have been developed so far. However, existing computational approaches do not include any advanced feature selection technique and they are facing problems concerning their classification performance and their interpretability. In the present paper, we propose a novel hybrid methodology which combines genetic algorithms and support vector machines in order to locate the optimal feature subset while achieving high classification performance. The proposed methodology was compared with two of the most promising existing methodologies in the problem of predicting human miRNA targets. Our approach outperforms existing methodologies in terms of classification performances while selecting a much smaller feature subset. © 2012 Springer-Verlag.

Predicting human miRNA target genes using a novel evolutionary methodology

KAUST Repository

Aigli, Korfiati

2012-01-01

The discovery of miRNAs had great impacts on traditional biology. Typically, miRNAs have the potential to bind to the 3\\'untraslated region (UTR) of their mRNA target genes for cleavage or translational repression. The experimental identification of their targets has many drawbacks including cost, time and low specificity and these are the reasons why many computational approaches have been developed so far. However, existing computational approaches do not include any advanced feature selection technique and they are facing problems concerning their classification performance and their interpretability. In the present paper, we propose a novel hybrid methodology which combines genetic algorithms and support vector machines in order to locate the optimal feature subset while achieving high classification performance. The proposed methodology was compared with two of the most promising existing methodologies in the problem of predicting human miRNA targets. Our approach outperforms existing methodologies in terms of classification performances while selecting a much smaller feature subset. © 2012 Springer-Verlag.

A Life-Cycle Cost Estimating Methodology for NASA-Developed Air Traffic Control Decision Support Tools

Science.gov (United States)

Wang, Jianzhong Jay; Datta, Koushik; Landis, Michael R. (Technical Monitor)

2002-01-01

This paper describes the development of a life-cycle cost (LCC) estimating methodology for air traffic control Decision Support Tools (DSTs) under development by the National Aeronautics and Space Administration (NASA), using a combination of parametric, analogy, and expert opinion methods. There is no one standard methodology and technique that is used by NASA or by the Federal Aviation Administration (FAA) for LCC estimation of prospective Decision Support Tools. Some of the frequently used methodologies include bottom-up, analogy, top-down, parametric, expert judgement, and Parkinson's Law. The developed LCC estimating methodology can be visualized as a three-dimensional matrix where the three axes represent coverage, estimation, and timing. This paper focuses on the three characteristics of this methodology that correspond to the three axes.

Evolving Intelligent Systems Methodology and Applications

CERN Document Server

Angelov, Plamen; Kasabov, Nik

2010-01-01

From theory to techniques, the first all-in-one resource for EIS. There is a clear demand in advanced process industries, defense, and Internet and communication (VoIP) applications for intelligent yet adaptive/evolving systems. Evolving Intelligent Systems is the first self- contained volume that covers this newly established concept in its entirety, from a systematic methodology to case studies to industrial applications. Featuring chapters written by leading world experts, it addresses the progress, trends, and major achievements in this emerging research field, with a strong emphasis on th

Forecasting in Intelligence: Indications and Warning Methodology in Modern Practice

Directory of Open Access Journals (Sweden)

Marina Gennadievna Vlasova

2015-12-01

Full Text Available Today the national security system effectiveness seriously depends on the professional analysis of information and timely forecasts. Thus the efficient methods of forecasting in the sphere of international relations are of current importance for the modern intelligence services. The Indications and Warning Technique that was a key element of forecasting methodology in intelligence until the end of Cold War is estimated in the present article. Is this method still relevant in the contemporary world with its new international order, new security challenges and technological revolution in the data collection and processing? The main conclusion based on the overview of current researches and known intelligence practice is that indicators technique is still relevant for the early warning of national security threats but requires some adaptation to today’s issues. The most important trends in adaptation are supposed to be a creation of broadest possible spectrum of threatens scenarios as well as research of current strategic threatens and corresponding indicators. Also the appropriate software that automates the use of indications technique by the security services is very important. The author believes that the cooperation between intelligence services and academic community can increase the efficiency of the Indications Methodology and of the strategic forecasting as well.

Methodological concerns for determining power output in the jump squat.

Science.gov (United States)

Cormie, Prue; Deane, Russell; McBride, Jeffrey M

2007-05-01

The purpose of this study was to investigate the validity of power measurement techniques during the jump squat (JS) utilizing various combinations of a force plate and linear position transducer (LPT) devices. Nine men with at least 6 months of prior resistance training experience participated in this acute investigation. One repetition maximums (1RM) in the squat were determined, followed by JS testing under 2 loading conditions (30% of 1RM [JS30] and 90% of 1RM [JS90]). Three different techniques were used simultaneously in data collection: (a) 1 linear position transducer (1-LPT); (b) 1 linear position transducer and a force plate (1-LPT + FP); and (c) 2 linear position transducers and a force place (2-LPT + FP). Vertical velocity-, force-, and power-time curves were calculated for each lift using these methodologies and were compared. Peak force and peak power were overestimated by 1-LPT in both JS30 and JS90 compared with 2-LPT + FP and 1-LPT + FP (p squat varies according to the measurement technique utilized. The 1-LPT methodology is not a valid means of determining power output in the jump squat. Furthermore, the 1-LPT + FP method may not accurately represent power output in free weight movements that involve a significant amount of horizontal motion.

GIS-based tools to identify tradeoffs between waste management and remediation strategies from radiological dispersal device incidents

Energy Technology Data Exchange (ETDEWEB)

Lemieux, P.; Wood, J.; Snyder, E. [U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Boe, T. [Oak Ridge Inst. for Science and Education, Research Triangle Park, NC (United States); Schulthiesz, D.; Peake, T.; Ierardi, M. [U.S. Environmental Protection Agency, Washington, DC (United States); Hayes, C.; Rodgers, M. [Eastern Research Group, Inc., Morrisville, NC (United States)

2011-07-01

Management of waste and debris from the detonation of a Radiological Dispersal Device (RDD) will likely comprise a significant portion of the overall remediation effort and possibly contribute to a significant portion of the overall remediation costs. As part of the recent National Level Exercise, Liberty RadEx, that occurred in Philadelphia in April 2010, a methodology was developed by EPA to generate a first-order estimate of a waste inventory for the hypothetical RDD from the exercise scenario. Determination of waste characteristics and whether the generated waste is construction and demolition (C&D) debris, municipal solid waste (MSW), hazardous waste, mixed waste, or low level radioactive waste (LLRW), and characterization of the wastewater that is generated from the incident or subsequent cleanup activities will all influence the cleanup costs and timelines. Decontamination techniques, whether they involve chemical treatment, abrasive removal, or aqueous washing, will also influence the waste generated and associated cleanup costs and timelines. This paper describes the ongoing effort to develop a tool to support RDD planning and response activities by assessing waste quantities and characteristics as a function of potential mitigation strategies and targeted cleanup levels. (author)

GIS-based tools to identify tradeoffs between waste management and remediation strategies from radiological dispersal device incidents

International Nuclear Information System (INIS)

Lemieux, P.; Wood, J.; Snyder, E.; Boe, T.; Schulthiesz, D.; Peake, T.; Ierardi, M.; Hayes, C.; Rodgers, M.

2011-01-01

Management of waste and debris from the detonation of a Radiological Dispersal Device (RDD) will likely comprise a significant portion of the overall remediation effort and possibly contribute to a significant portion of the overall remediation costs. As part of the recent National Level Exercise, Liberty RadEx, that occurred in Philadelphia in April 2010, a methodology was developed by EPA to generate a first-order estimate of a waste inventory for the hypothetical RDD from the exercise scenario. Determination of waste characteristics and whether the generated waste is construction and demolition (C&D) debris, municipal solid waste (MSW), hazardous waste, mixed waste, or low level radioactive waste (LLRW), and characterization of the wastewater that is generated from the incident or subsequent cleanup activities will all influence the cleanup costs and timelines. Decontamination techniques, whether they involve chemical treatment, abrasive removal, or aqueous washing, will also influence the waste generated and associated cleanup costs and timelines. This paper describes the ongoing effort to develop a tool to support RDD planning and response activities by assessing waste quantities and characteristics as a function of potential mitigation strategies and targeted cleanup levels. (author)

Estimating Leptospirosis Incidence Using Hospital-Based Surveillance and a Population-Based Health Care Utilization Survey in Tanzania

Science.gov (United States)

Biggs, Holly M.; Hertz, Julian T.; Munishi, O. Michael; Galloway, Renee L.; Marks, Florian; Saganda, Wilbrod; Maro, Venance P.; Crump, John A.

2013-01-01

Background The incidence of leptospirosis, a neglected zoonotic disease, is uncertain in Tanzania and much of sub-Saharan Africa, resulting in scarce data on which to prioritize resources for public health interventions and disease control. In this study, we estimate the incidence of leptospirosis in two districts in the Kilimanjaro Region of Tanzania. Methodology/Principal Findings We conducted a population-based household health care utilization survey in two districts in the Kilimanjaro Region of Tanzania and identified leptospirosis cases at two hospital-based fever sentinel surveillance sites in the Kilimanjaro Region. We used multipliers derived from the health care utilization survey and case numbers from hospital-based surveillance to calculate the incidence of leptospirosis. A total of 810 households were enrolled in the health care utilization survey and multipliers were derived based on responses to questions about health care seeking in the event of febrile illness. Of patients enrolled in fever surveillance over a 1 year period and residing in the 2 districts, 42 (7.14%) of 588 met the case definition for confirmed or probable leptospirosis. After applying multipliers to account for hospital selection, test sensitivity, and study enrollment, we estimated the overall incidence of leptospirosis ranges from 75–102 cases per 100,000 persons annually. Conclusions/Significance We calculated a high incidence of leptospirosis in two districts in the Kilimanjaro Region of Tanzania, where leptospirosis incidence was previously unknown. Multiplier methods, such as used in this study, may be a feasible method of improving availability of incidence estimates for neglected diseases, such as leptospirosis, in resource constrained settings. PMID:24340122

Methodology applied to develop the DHIE: applied methodology

CSIR Research Space (South Africa)

Herselman, Marlien

2016-12-01

Full Text Available This section will address the methodology that was applied to develop the South African Digital Health Innovation Ecosystem (DHIE). Each chapter under Section B represents a specific phase in the methodology....

Increased situation awareness in major incidents-radio frequency identification (RFID) technique: a promising tool.

Science.gov (United States)

Jokela, Jorma; Rådestad, Monica; Gryth, Dan; Nilsson, Helené; Rüter, Anders; Svensson, Leif; Harkke, Ville; Luoto, Markku; Castrén, Maaret

2012-02-01

In mass-casualty situations, communications and information management to improve situational awareness is a major challenge for responders. In this study, the feasibility of a prototype system that utilizes commercially available, low-cost components, including Radio Frequency Identification (RFID) and mobile phone technology, was tested in two simulated mass-casualty incidents. The feasibility and the direct benefits of the system were evaluated in two simulated mass-casualty situations: one in Finland involving a passenger ship accident resulting in multiple drowning/hypothermia patients, and another at a major airport in Sweden using an aircraft crash scenario. Both simulations involved multiple agencies and functioned as test settings for comparing the disaster management's situational awareness with and without using the RFID-based system. Triage documentation was done using both an RFID-based system, which automatically sent the data to the Medical Command, and a traditional method using paper triage tags. The situational awareness was measured by comparing the availability of up-to date information at different points in the care chain using both systems. Information regarding the numbers and status or triage classification of the casualties was available approximately one hour earlier using the RFID system compared to the data obtained using the traditional method. The tested prototype system was quick, stable, and easy to use, and proved to work seamlessly even in harsh field conditions. It surpassed the paper-based system in all respects except simplicity of use. It also improved the general view of the mass-casualty situations, and enhanced medical emergency readiness in a multi-organizational medical setting. The tested technology is feasible in a mass-casualty incident; further development and testing should take place.

Methodological approaches to the assessment of the competitiveness of the region

Directory of Open Access Journals (Sweden)

Nazarov Nikolai Igorevich

2013-03-01

Full Text Available This paper presents the results of research methodologies for assessing the competitiveness of the region based on the analysis of literary sources. The study stated the author's technique assessing the competitiveness of the region, in accordance with the paradigm of regional development.

Identification of potential safety-related incidents applicable to a breeder fuel reprocessing plant

International Nuclear Information System (INIS)

Perkins, W.C.

1980-01-01

The current emphasis on safety in all phases of the nuclear fuel cycle requires that safety features be identified and included in designs of nuclear facilities at the earliest possible stage. A popular method for the early identification of these safety features is the Preliminary Hazards Analysis. An extension of this analysis is to illustrate the nature of a hazard by its effects in accident situations, that is, to identify what are called safety-related incidents. Some useful tools are described which have been used at the Savannah River Laboratory, SRL, to make Preliminary Hazards Analyses as well as safety analyses of facilities for processing spent nuclear fuels from both power and production reactors. These tools have also been used in safety studies of waste handling operations at the Savannah River Plant. The tools are the SRL Incidents Data Bank and the What If meeting. The application of this methodology to a proposed facility which has breeder fuel reprocessing capability, the Hot Experimental Facility (HEF) is illustrated

Methodological Improvements in Combining TMS and Functional MRI

OpenAIRE

Moisa, Marius

2011-01-01

Since 1997, when Bohning and colleagues demonstrated for the first time the feasibility of interleaving transcranial magnetic stimulation (TMS) with blood oxygenation level dependency functional magnetic resonance imaging (BOLD fMRI), this combination became a very promising techniques to study brain connectivity. However, the implementation of a reliable setup for interleaved TMS/fMRI is still technically challenging. In this thesis, I intended to further explore and develop methodological i...

Glancing-incidence X-ray diffraction of Ag nanoparticles in gold lustre decoration of Italian Renaissance pottery

Energy Technology Data Exchange (ETDEWEB)

Bontempi, E.; Colombi, P.; Depero, L.E. [Universita di Brescia, Laboratorio di Chimica per le Tecnologie and INSTM, Brescia (Italy); Cartechini, L. [Universita di Perugia, Istituto di Scienze e Tecnologie Molecolari-CNR, Sezione di Perugia, Perugia (Italy); Presciutti, F.; Brunetti, B.G. [Universita di Perugia, INSTM and Centro di Eccellenza SMAArt, Dipartimento di Chimica, Perugia (Italy); Sgamellotti, A. [Universita di Perugia, Istituto di Scienze e Tecnologie Molecolari-CNR, Sezione di Perugia, Perugia (Italy); Universita di Perugia, INSTM and Centro di Eccellenza SMAArt, Dipartimento di Chimica, Perugia (Italy)

2006-06-15

Lustre is known as one of the most significant decorative techniques of Medieval and Renaissance pottery in the Mediterranean basin, characterized by brilliant gold and red metallic reflections and iridescence effects. Previous studies by various techniques (SEM-EDS and TEM, UV-VIS, XRF, RBS and EXAFS) demonstrated that lustre consists of a heterogeneous metal-glass composite film, formed by Cu and Ag nanoparticles dispersed within the outer layer of a tin-opacified lead glaze. In the present work the investigation of an original gold lustre sample from Deruta has been carried out by means of glancing-incidence X-ray diffraction techniques (GIXRD). The study was aimed at providing information on structure and depth distribution of Ag nanoparticles. Exploiting the capability of controlling X-ray penetration in the glaze by changing the incidence angle, we used GIXRD measurements to estimate non-destructively thickness and depth of silver particles present in the first layers of the glaze. (orig.)

Glancing-incidence X-ray diffraction of Ag nanoparticles in gold lustre decoration of Italian Renaissance pottery

International Nuclear Information System (INIS)

Bontempi, E.; Colombi, P.; Depero, L.E.; Cartechini, L.; Presciutti, F.; Brunetti, B.G.; Sgamellotti, A.

2006-01-01

Lustre is known as one of the most significant decorative techniques of Medieval and Renaissance pottery in the Mediterranean basin, characterized by brilliant gold and red metallic reflections and iridescence effects. Previous studies by various techniques (SEM-EDS and TEM, UV-VIS, XRF, RBS and EXAFS) demonstrated that lustre consists of a heterogeneous metal-glass composite film, formed by Cu and Ag nanoparticles dispersed within the outer layer of a tin-opacified lead glaze. In the present work the investigation of an original gold lustre sample from Deruta has been carried out by means of glancing-incidence X-ray diffraction techniques (GIXRD). The study was aimed at providing information on structure and depth distribution of Ag nanoparticles. Exploiting the capability of controlling X-ray penetration in the glaze by changing the incidence angle, we used GIXRD measurements to estimate non-destructively thickness and depth of silver particles present in the first layers of the glaze. (orig.)

Glancing-incidence X-ray diffraction of Ag nanoparticles in gold lustre decoration of Italian Renaissance pottery

Science.gov (United States)

Bontempi, E.; Colombi, P.; Depero, L. E.; Cartechini, L.; Presciutti, F.; Brunetti, B. G.; Sgamellotti, A.

2006-06-01

Lustre is known as one of the most significant decorative techniques of Medieval and Renaissance pottery in the Mediterranean basin, characterized by brilliant gold and red metallic reflections and iridescence effects. Previous studies by various techniques (SEM-EDS and TEM, UV-VIS, XRF, RBS and EXAFS) demonstrated that lustre consists of a heterogeneous metal-glass composite film, formed by Cu and Ag nanoparticles dispersed within the outer layer of a tin-opacified lead glaze. In the present work the investigation of an original gold lustre sample from Deruta has been carried out by means of glancing-incidence X-ray diffraction techniques (GIXRD). The study was aimed at providing information on structure and depth distribution of Ag nanoparticles. Exploiting the capability of controlling X-ray penetration in the glaze by changing the incidence angle, we used GIXRD measurements to estimate non-destructively thickness and depth of silver particles present in the first layers of the glaze.

Proposed Methodology for Establishing Area of Applicability

International Nuclear Information System (INIS)

Broadhead, B.L.; Hopper, C.M.; Parks, C.V.

1999-01-01

This paper presents the application of sensitivity and uncertainty (S/U) analysis methodologies to the data validation tasks of a criticality safety computational study. The S/U methods presented are designed to provide a formal means of establishing the area (or range) of applicability for criticality safety data validation studies. The development of parameters that are analogous to the standard trending parameters form the key to the technique. These parameters are the so-called D parameters, which represent the differences by energy group of S/U-generated sensitivity profiles, and c parameters, which are the k correlation coefficients, each of which give information relative to the similarity between pairs of selected systems. The use of a Generalized Linear Least-Squares Methodology (GLLSM) tool is also described in this paper. These methods and guidelines are also applied to a sample validation for uranium systems with enrichments greater than 5 wt %

The intersections between TRIZ and forecasting methodology

Directory of Open Access Journals (Sweden)

Georgeta BARBULESCU

2010-12-01

Full Text Available The authors’ intention is to correlate the basic knowledge in using the TRIZ methodology (Theory of Inventive Problem Solving or in Russian: Teoriya Resheniya Izobretatelskikh Zadatch as a problem solving tools meant to help the decision makers to perform more significant forecasting exercises. The idea is to identify the TRIZ features and instruments (40 inventive principles, i.e. for putting in evidence the noise and signal problem, for trend identification (qualitative and quantitative tendencies and support tools in technological forecasting, to make the decision-makers able to refine and to increase the level of confidence in the forecasting results. The interest in connecting TRIZ to forecasting methodology, nowadays, relates to the massive application of TRIZ methods and techniques for engineering system development world-wide and in growing application of TRIZ’s concepts and paradigms for improvements of non-engineering systems (including the business and economic applications.

The fairness of the PPS reimbursement methodology.

Science.gov (United States)

Gianfrancesco, F D

1990-01-01

In FY 1984 the Medicare program implemented a new method of reimbursing hospitals for inpatient services, the Prospective Payment System (PPS). Under this system, hospitals are paid a predetermined amount per Medicare discharge, which varies according to certain patient and hospital characteristics. This article investigates the presence of systematic biases and other potential imperfections in the PPS reimbursement methodology as revealed by its effects on Medicare operating ratios. The study covers the first three years of the PPS (approximately 1984-1986) and is based on hospital data from the Medicare cost reports and other related sources. Regression techniques were applied to these data to determine how Medicare operating ratios were affected by specific aspects of the reimbursement methodology. Several possible imbalances were detected. The potential undercompensation relating to these can be harmful to certain classes of hospitals and to the Medicare populations that they serve. PMID:2109738

Children's Preferences for Film Form and Technique.

Science.gov (United States)

Cox, Carole

1982-01-01

Describes the methodology and results of a study of the preferences of fourth- and fifth-grade children for film form and technique. Indicates that children prefer narrative/live action films, followed by narrative/animation, nonnarrative/live action, and nonnarrative/animation. (HTH)

Development of a novel methodology for indoor emission source identification

DEFF Research Database (Denmark)

Han, K.H.; Zhang, J.S.; Knudsen, H.N.

2011-01-01

The objective of this study was to develop and evaluate a methodology to identify individual sources of emissions based on the measurements of mixed air samples and the emission signatures of individual materials previously determined by Proton Transfer Reaction-Mass Spectrometry (PTR-MS), an on......-line analytical device. The methodology based on signal processing principles was developed by employing the method of multiple regression least squares (MRLS) and a normalization technique. Samples of nine typical building materials were tested individually and in combination, including carpet, ceiling material...... experiments and investigation are needed for cases where the relative emission rates among different compounds may change over a long-term period....

A performance assessment methodology for low-level radioactive waste disposal

International Nuclear Information System (INIS)

Deering, L.R.; Kozak, M.W.

1990-01-01

To demonstrate compliance with the performance objectives governing protection of the general population in 10 CFR 61.41, applicants for land disposal of low-level radioactive waste are required to conduct a pathways analysis, or quantitative evaluation of radionuclide release, transport through environmental media, and dose to man. The Nuclear Regulatory Commission staff defined a strategy and initiated a project at Sandia National Laboratories to develop a methodology for independently evaluating an applicant's analysis of postclosure performance. This performance assessment methodology was developed in five stages: (1) identification of environmental pathways, (2) ranking, the significance of the pathways, (3) identification and integration of models for pathway analyses, (4) identification and selection of computer codes and techniques for the methodology, and (5) implementation of the codes and documentation of the methodology. The final methodology implements analytical and simple numerical solutions for source term, ground-water flow and transport, surface water transport, air transport, food chain, and dosimetry analyses, as well as more complex numerical solutions for multidimensional or transient analyses when more detailed assessments are needed. The capability to perform both simple and complex analyses is accomplished through modular modeling, which permits substitution of various models and codes to analyze system components

A framework for assessing the adequacy and effectiveness of software development methodologies

Science.gov (United States)

Arthur, James D.; Nance, Richard E.

1990-01-01

Tools, techniques, environments, and methodologies dominate the software engineering literature, but relatively little research in the evaluation of methodologies is evident. This work reports an initial attempt to develop a procedural approach to evaluating software development methodologies. Prominent in this approach are: (1) an explication of the role of a methodology in the software development process; (2) the development of a procedure based on linkages among objectives, principles, and attributes; and (3) the establishment of a basis for reduction of the subjective nature of the evaluation through the introduction of properties. An application of the evaluation procedure to two Navy methodologies has provided consistent results that demonstrate the utility and versatility of the evaluation procedure. Current research efforts focus on the continued refinement of the evaluation procedure through the identification and integration of product quality indicators reflective of attribute presence, and the validation of metrics supporting the measure of those indicators. The consequent refinement of the evaluation procedure offers promise of a flexible approach that admits to change as the field of knowledge matures. In conclusion, the procedural approach presented in this paper represents a promising path toward the end goal of objectively evaluating software engineering methodologies.

In situ electrochemical impedance spectroscopy/synchrotron radiation grazing incidence X-ray diffraction-A powerful new technique for the characterization of electrochemical surfaces and interfaces

Energy Technology Data Exchange (ETDEWEB)

De Marco, Roland [Nanochemistry Research Institute, Department of Applied Chemistry, Curtin University of Technology, GPO Box U 1987, Perth, WA 6845 (Australia)]. E-mail: r.demarco@exchange.curtin.edu.au; Jiang, Z.-T. [Nanochemistry Research Institute, Department of Applied Chemistry, Curtin University of Technology, GPO Box U 1987, Perth, WA 6845 (Australia); Martizano, Jay [Nanochemistry Research Institute, Department of Applied Chemistry, Curtin University of Technology, GPO Box U 1987, Perth, WA 6845 (Australia); Lowe, Alex [Nanochemistry Research Institute, Department of Applied Chemistry, Curtin University of Technology, GPO Box U 1987, Perth, WA 6845 (Australia); Pejcic, Bobby [Nanochemistry Research Institute, Department of Applied Chemistry, Curtin University of Technology, GPO Box U 1987, Perth, WA 6845 (Australia); Riessen, Arie van [Materials Research Group, Department of Applied Physics, Curtin University of Technology, GPO Box U 1987, Perth, WA 6845 (Australia)

2006-08-15

A marriage of electrochemical impedance spectroscopy (EIS) and in situ synchrotron radiation grazing incidence X-ray diffraction (SR-GIXRD) has provided a powerful new technique for the elucidation of the mechanistic chemistry of electrochemical systems. In this study, EIS/SR-GIXRD has been used to investigate the influence of metal ion buffer calibration ligands, along with natural organic ligands in seawater, on the behaviour of the iron chalcogenide glass ion-selective electrode (ISE). The SR-GIXRD data demonstrated that citrate - a previously reported poor iron calibration ligand for the analysis of seawater - induced an instantaneous and total dissolution of crystalline GeSe and Sb{sub 2}Se{sub 3} in the modified surface layer (MSL) of the ISE, while natural organic ligands in seawater and a mixture of ligands in a mimetic seawater ligand system protected the MSL's crystalline inclusions of GeSe and Sb{sub 2}Se{sub 3} from oxidative attack. Expectedly, the EIS data showed that citrate induced a loss in the medium frequency time constant for the MSL of the ISE, while seawater's natural organic ligands and the mimetic ligand system preserved the medium frequency EIS response characteristics of the ISE's MSL. The new EIS/SR-GIXRD technique has provided insights into the suitability of iron calibration ligands for the analysis of iron in seawater.

An Integrated Safety Assessment Methodology for Generation IV Nuclear Systems

International Nuclear Information System (INIS)

Leahy, Timothy J.

2010-01-01

The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Early work of the RSWG focused on defining a safety philosophy founded on lessons learned from current and prior generations of nuclear technologies, and on identifying technology characteristics that may help achieve Generation IV safety goals. More recent RSWG work has focused on the definition of an integrated safety assessment methodology for evaluating the safety of Generation IV systems. The methodology, tentatively called ISAM, is an integrated 'toolkit' consisting of analytical techniques that are available and matched to appropriate stages of Generation IV system concept development. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time.

The effect of total knee arthroplasty on patients' balance and incidence of falls: a systematic review.

Science.gov (United States)

Moutzouri, M; Gleeson, N; Billis, E; Tsepis, E; Panoutsopoulou, I; Gliatis, J

2017-11-01

Despite the high incidence of falls in patients with OA, few studies have explored whether falls risk is affected after patients undergo total knee arthroplasty (TKA). Therefore, the aim of this systematic review was to identify the extent of the effects of TKA on balance and incidence of falls by critically reviewing the available literature. A systematic review of published literature sources was conducted up to March 2014. All studies assessing balance and incidence of falls after TKA (without physiotherapeutic intervention) were included. The methodological quality of each study was reviewed using the Critical Appraisal Skill Programme tool. Thirteen studies were included, comprising of ten cohort studies (Level II) and three studies with Level of evidence III. Findings provide evidence that TKA improves significantly single-limb standing balance (~60%) and dynamic balance up to 1-year following surgery (Level of evidence II). Moreover, TKA influences positively fear of falling and incidence of falls by switching 54.2 % of pre-operative fallers to post-operative non-fallers (Level of evidence II-III). It is highlighted that knee extension strength, proprioception and symmetrization of postural strategies have not fully recovered post-TKA and influence balance performance. Clinically, these persistent deficits need to be mitigated by physiotherapy even before TKA takes place.

Understanding information exchange during disaster response: Methodological insights from infocentric analysis

Science.gov (United States)

Toddi A. Steelman; Branda Nowell; Deena. Bayoumi; Sarah. McCaffrey

2014-01-01

We leverage economic theory, network theory, and social network analytical techniques to bring greater conceptual and methodological rigor to understand how information is exchanged during disasters. We ask, "How can information relationships be evaluated more systematically during a disaster response?" "Infocentric analysis"—a term and...

Taipower's transient analysis methodology for pressurized water reactors

International Nuclear Information System (INIS)

Huang, Pinghue

1998-01-01

The methodology presented in this paper is a part of the 'Taipower's Reload Design and Transient Analysis Methodologies for Light Water Reactors' developed by the Taiwan Power Company (TPC) and the Institute of Nuclear Energy Research. This methodology utilizes four computer codes developed or sponsored by Electric Power Research institute: system transient analysis code RETRAN-02, core thermal-hydraulic analysis code COBRAIIIC, three-dimensional spatial kinetics code ARROTTA, and fuel rod evaluation code FREY. Each of the computer codes was extensively validated. Analysis methods and modeling techniques were conservatively established for each application using a systematic evaluation with the assistance of sensitivity studies. The qualification results and analysis methods were documented in detail in TPC topical reports. The topical reports for COBRAIIIC, ARROTTA. and FREY have been reviewed and approved by the Atomic Energy Council (ABC). TPC 's in-house transient methodology have been successfully applied to provide valuable support for many operational issues and plant improvements for TPC's Maanshan Units I and 2. Major applications include the removal of the resistance temperature detector bypass system, the relaxation of the hot-full-power moderator temperature coefficient design criteria imposed by the ROCAEC due to a concern on Anticipated Transient Without Scram, the reduction of boron injection tank concentration and the elimination of the heat tracing, and the reduction of' reactor coolant system flow. (author)

Methodology for safety and security of radioactive sources and materials. The Israeli approach

International Nuclear Information System (INIS)

Keren, M.

1998-01-01

About 10 Radioactive incidents occurred in Israel during 1996-1997. Some of them were theft or lost of Radioactive equipment or sources, some happened because misuse of Radioactive equipment and some of other reasons. Part of them could be eliminated if a better methodological attitude to the subject existed. A new methodology for notification, registration and licensing is described. Hopefully this methodology will increase defense in depth and the Safety and Security of Radioactive sources and materials. Information on the inventory of Radioactive sources and materials is essential. Where they are situated, what is the supply rate or all history from berth to grave. Persons involved are important: Who are the Radiation Safety Officers (RSO), what is their training and updating programs. As much as possible information on the site and places where those Radioactive sources and materials are used. Procedures for security of sources and materials is part of site information, beside safety precautions. Users are obliged to inform on any changes and to ask for confirmation to those changes. The same is when high activity sources are moved across the country. (author)

Role of nuclear techniques in oncological practice in Bangladesh

International Nuclear Information System (INIS)

Jehan, A.H.; Karim, M.A.; Begum, S.M.F.; Khan, H.U.

2004-01-01

Full text: Application of nuclear medicine techniques plays an integral part in the diagnosis, management and follow-up of cancer patients. Scintigraphic studies are able to detect primary and secondary malignant lesions in various organs e.g. bone, thyroid, breast, brain, lung, kidney, liver etc. Nuclear techniques are comparatively simple, non-invasive with minimum cost and radiation exposure. In recent years radio nuclide techniques are being widely accepted by the practicing oncologists especially for diagnosis, accurate assessment of the disease process and treatment planning. Bangladesh Atomic Energy Commission helped in establishing a Central Institute of Nuclear Medicine and Ultrasound and 14 smaller sub centers in the periphery, equipped with SPECT Gamma camera, Ultrasound, RIA, and DEXA facilities. A retrospective analysis of data of clinically diagnosed cancer patients referred to the sub center for diagnosis showed a total of 117 cases, 62 (72.54 %) female and 55 (64.35 %) male in the age group 40-70 years. The incidence of malignancy was calculated based on the age and gender. The highest incidence among the women was of cancer breast (67.74%) followed by liver (11.29%) and thyroid (11.29%). Among the male population, the highest incidence was of cancer prostate (29.09%) followed by liver (9.09%) and renal cell carcinoma (9.09%). As far as therapy is concerned, only cancer thyroid cases were assessed and considered for I-131 therapy with successful results. Of these patients treated with radioiodine, 9 were for primary disease while one patient had bony metastasis also. No death or complication has yet been reported. There is no controlled program for screening cancer patients in Bangladesh, but with assistance from the Nuclear Oncologists it was possible to obtain a raw data on the incidence of different cancers in Bangladesh. This in future may help in the management strategy of various malignancies. (author)

Polylactic acid organogel as versatile scaffolding technique

NARCIS (Netherlands)

Punet, Xavier; Levato, Riccardo; Bataille, Isabelle; Letourneur, Didier; Engel, Elisabeth; Mateos-Timoneda, Miguel A

2017-01-01

Tissue engineering requires scaffolding techniques based on non-toxic processes that permits the fabrication of constructs with tailored properties. Here, a two-step methodology based on the gelation and precipitation of the poly(lactic) acid/ethyl lactate organogel system is presented. With this

Methodology for Thermal Behaviour Assessment of Homogeneous Façades in Heritage Buildings

Directory of Open Access Journals (Sweden)

Enrique Gil

2017-01-01

Full Text Available It is fundamental to study the thermal behaviour in all architectural constructions throughout their useful life, in order to detect early deterioration ensuring durability, in addition to achieving and maintaining the interior comfort with the minimum energy consumption possible. This research has developed a methodology to assess the thermal behaviour of façades in heritage buildings. This paper presents methodology validation and verification (V & V through a laboratory experiment. Guidelines and conclusions are extracted with the employment of three techniques in this experiment (thermal sensors, thermal imaging camera, and 3D thermal simulation in finite element software. A small portion of a homogeneous façade has been reproduced with indoor and outdoor thermal conditions. A closed chamber was constructed with wood panels and thermal insulation, leaving only one face exposed to the outside conditions, with a heat source inside the chamber that induces a temperature gradient in the wall. With this methodology, it is possible to better understand the thermal behaviour of the façade and to detect possible damage with the calibration and comparison of the results obtained by the experimental and theoretical techniques. This methodology can be extrapolated to the analysis of the thermal behaviour of façades in heritage buildings, usually made up of homogeneous material.

Thyroid cancer incidence in the Ukraine after the Chernobyl accident: comparison with spontaneous incidences

International Nuclear Information System (INIS)

Sobolev, B.; Kairo, I.; Likhtarev, I.; Heidenreich, W.F.; Jacob, P.; Goulko, G.

1997-01-01

The thyroid cancer incidence in the Ukraine among those born in the period 1968-1986 was analyzed with the aim to identify the enhancement due to the Chernobyl accident. Since any Ukrainian data referring to the time period before the accident are scarce and the variation of spontaneous incidences in other countries is immense, the Ukrainian incidences in the period 1986-1989 were used to estimate the baseline risk. Following 1990, the incidence in the southern part of the Ukraine increased by about 30%, independent of age. In the other parts the increase of the incidence depended on age at exposure. In the age group of 9-year-old children, the incidences in three regions defined as the 'high-dose area', the northern, and the middle oblasts, increased by factors of 50, 20, and 6, respectively. These rates (1991-1995) are well above spontaneous rates in other countries. In the age group of 17-year-old juveniles, the incidence increased by a factor of 6 for the 'high dose area' and in the three northern oblasts, whereas in the nine 'middle' oblasts it was similar to the incidence of the 'southern' Ukraine. These rates are within the range found in other countries. (orig.)

Effects of proactive and prosocial behavior on critical incidents of Lima schoolchildren

Directory of Open Access Journals (Sweden)

Jhon A. Holguin Alvarez

2017-08-01

Full Text Available The study focuses on the theoretical approaches of proactive and prosocial behavior of Covey (1996, Xifra (2009 and Roche-Olivar (2004, with the objective of analyzing the significant differences in the decrease of critical incidents in public school students And private schools in the district of San Juan de Lurigancho, for which two experimental workshops with quasiexperimental methodology were applied in three groups of 1st and 2nd high school students (G. Exp. (Proactivity = 17; G. Exp. Prosociality = 15; G. Control = 16; A behavior observation log and the PANIC instrument of Monereo and Monte (2011 were used. The results indicate significant differences with better effects in the workshop of proactive behavior (Hrp = 16.59, p <.05; A comparison of the verbal violence dimension in which better effects were obtained by the prosocial behavior workshop (Hrp = 14.12, p <.05; Finally, the limitations were that students in the proactivity workshop slowed down their critical incidents by demonstrating excessive personalism, and for later studies, it is suggested to work the above mentioned workshops, including assaulted students.

COMPARISON OF ABSORBABLE EXTRA LONG TERM POLY HYDROXY BUTYRATE SUTURE VS NON ABSORBABLE (POLYPROPYLENE SUTURE FOR ABDOMINAL WALL CLOSURE

Directory of Open Access Journals (Sweden)

Mallikarjun

2015-07-01

Full Text Available PURPOSE: The aim of study is to compare Continuous technique with non - absorbable sutures, Interrupted technique with non - absorbable sutures and Continuous technique with slowly absorbable sutures Focusing mainly on incidence of incisional hernias, burst abdomen, wound infections, chronic wound pain, suture sinus, stitch granuloma, time for rectus closure. METHODOLOGY : Study was conducted for a period of one year on 271 randomized patients with primary elective midline laparotomy in our hospital . patients are divided into group I includes 102 patients with continuous technique using non absorbable polypropylene, group II includes 91 patients with interrupted technique using non absorbable polypropylene and group III includes 78 patients with continuous slowly absorbable polyhydroxybutyrate. RESULTS: No significant difference observed in incidence of wound infections and burst abdomen in all the 3 groups but relatively higher incidence of wound infections in noted our hospital. Incidence of stich granuloma suture sinus and chronic wound pain is more with interrupted technique than continuous technique and are more with non - absor bable suture material. CONCLUSION: Incidence of incisional hernias, suture complications like suture sinus, stitch granuloma can be more effectively reduced with slowly absorbable continuous sutures.