WorldWideScience

Sample records for inch direct view

  1. One-inch field of view imaging probe for breast cancer sentinel node location

    International Nuclear Information System (INIS)

    D'Errico, Giovanni; Scafe, Raffaele; Soluri, Alessandro; Schiaratura, Alfiero; Maria Mangano, Anna; David, Vincenzo; Scopinaro, Francesco

    2003-01-01

    The already reported 1-in. 2 field of view mini gamma camera known since 1998 with the name of Imaging Probe (IP), has been used for sentinel node localization by a medical equipe that, though trained by the group of nuclear physicians of the University 'La Sapienza' who first conceived and used this detector, has used IP in its own Hospital to: (1) gain experience for future use during operations--a cooperative work on IP radio guided orthopaedic operations has already started working, and (2) to start with IP multicenter trials. In six patients with breast cancer, who underwent lymphoscintigraphy for sentinel node biopsy, sentinel node was checked and located with IP and non-imaging Neoprobe 2000 CdTe (Zn) probe, independent of location by means of large field of view Anger camera. Operators who used Neoprobe and IP were blinded to each other and not aware of the results of Anger camera imaging. Anger camera, as well as IP and neoprobe detected 7 nodes in 6 pts. Detection time was 2', 06'' SD 26'' with IP and 2', 18'' SD 47'' with neoprobe 2000. The most difficult to find node required 2 min and 56 s--inside sd--for IP detection and 3 min and 45 s with neoprobe. Subjective impression of being sure of having detected sentinel node was: absolutely sure on 7/7 nodes with IP and on 5/7 nodes with neoprobe

  2. Directed Self-Assembly of Block Copolymer for Bit Patterned Media with Areal Density of 1.5 Teradot/Inch2 and Beyond

    Directory of Open Access Journals (Sweden)

    XiaoMin Yang

    2013-01-01

    Full Text Available Directed self-assembly (DSA of block copolymer (BCP holds great promise for many applications in nanolithography, including the next generation magnetic recording. In this work, directed self-assembly of block copolymer technique has been combined with rotary stage electron beam mastering to fabricate a circular full track nanoimprint template for bit patterned media (BPM fabrication. In order to meet specific requirements in pattern structure and format between the data and the servo zone in a servo-integrated template, three types of lithographically defined prepatterns, (1 two-dimensional chemical pre-pattern, (2 two-dimensional low-topographic pre-pattern, and (3 one-dimensional high-topographic pre-pattern, have been explored for DSA process with two types of commercially available BCP thin film materials: cylinder-forming poly(styrene-b-methyl methacrylate (PS-b-PMMA and sphere-forming poly(styrene-b-dimethylsiloxane (PS-b-PDMS. All guided BCP patterns exhibit highly ordered hexagonal close-packed (hcp structures with high pattern quality. Using these BCP patterns, two polarities of dots-array templates (hole-tone and pillar-tone with integrated servo patterns have been fabricated on a fused silica substrate at a density greater than 1.0 Td/in2. Furthermore, the fabricated master template has been used for UV-cure nanoimprint lithography process development on 2.5 inch disk size media. Good pattern uniformity in imprint resist has been achieved over an entire 2.4 mm wide band area. The imprint resist patterns have been further transferred into underlying CoCrPt media by ion beam etching. Evidently, for the first time, the patterned CoCrPt alloy dots (hcp pattern have successfully been demonstrated at a high density of  1.5 Td/in2 (pitch=22.3 nm for a guided media (Hc≅7 kOe and 3.2 Td/in2 (pitch=15.2 nm for an unguided media (Hc≅5 kOe.

  3. Views of Gifted Elementary Students about Self-Directed Learning

    Science.gov (United States)

    Van Deur, Penny

    2011-01-01

    Despite the connection between independent learning and gifted students, little is known of the views these students hold about the process of being self-directed learners. This interview study examined views of ten gifted elementary school students in South Australia about Self-Directed Learning. The interview responses showed that these gifted…

  4. Pixel extraction based integral imaging with controllable viewing direction

    International Nuclear Information System (INIS)

    Ji, Chao-Chao; Deng, Huan; Wang, Qiong-Hua

    2012-01-01

    We propose pixel extraction based integral imaging with a controllable viewing direction. The proposed integral imaging can provide viewers three-dimensional (3D) images in a very small viewing angle. The viewing angle and the viewing direction of the reconstructed 3D images are controlled by the pixels extracted from an elemental image array. Theoretical analysis and a 3D display experiment of the viewing direction controllable integral imaging are carried out. The experimental results verify the correctness of the theory. A 3D display based on the integral imaging can protect the viewer’s privacy and has huge potential for a television to show multiple 3D programs at the same time. (paper)

  5. A direct-view customer-oriented digital holographic camera

    Science.gov (United States)

    Besaga, Vira R.; Gerhardt, Nils C.; Maksimyak, Peter P.; Hofmann, Martin R.

    2018-01-01

    In this paper, we propose a direct-view digital holographic camera system consisting mostly of customer-oriented components. The camera system is based on standard photographic units such as camera sensor and objective and is adapted to operate under off-axis external white-light illumination. The common-path geometry of the holographic module of the system ensures direct-view operation. The system can operate in both self-reference and self-interference modes. As a proof of system operability, we present reconstructed amplitude and phase information of a test sample.

  6. The Six-Inch Lunar Atlas A Pocket Field Guide

    CERN Document Server

    Spain, Don

    2009-01-01

    The Six-Inch Lunar Atlas has been designed specifically for use in the field by lunar observers so it’s perfect for fitting into an observer’s pocket! The author’s own lunar photographs were taken with a 6-inch (150mm) telescope and CCD camera, and closely match the visual appearance of the Moon when viewed through 3-inch to 8-inch telescopes. Each picture is shown oriented "as the Moon really is" when viewed from the northern hemisphere, and is supplemented by exquisite computer sketches that list the main features. Two separate computer sketches are provided to go with each photograph, one oriented to appear as seen through an SCT telescope (e.g. the Meade and Celestron ranges), the other oriented for Newtonian and refracting telescopes. Observers using the various types telescopes will find it extremely helpful to identify lunar features as the human brain is very poor at making "mirror-image" visual translations.

  7. Art viewing directives in hospital settings effect on mood.

    Science.gov (United States)

    Ho, Rainbow T H; Potash, Jordan S; Fang, Fan; Rollins, Judy

    2015-01-01

    The purpose of this study was to determine the effect viewing directives can have when encountering art in hospitals. A secondary objective of the study was to understand the responses of viewers to an art exhibit on the theme of medical student empathy toward patient pain and suffering. Displaying art in hospitals has been credited with increasing well-being of patients, visitors, and staff. Generally, hospital curators have focused on the type of art to display (natural, symbolic, and abstract). This focus has neglected the possibility that in addition to the type of art, the way that viewers engage art may also be responsible for the healing effect. Participants (n = 97) were randomly allocated into one of the viewing directives: (1) reflecting on one artwork, (2) creating a drawing or poem in response to one artwork, or (3) no direction. Prior to looking at the art and immediately after, participants were administered the Brief Mood Introspection Scale (BMIS) and offered an opportunity to participate in an interview. Pre-post results of the BMIS demonstrated that viewers who received directions achieved some therapeutic effect. Qualitative themes from the post-exhibit interviews identified that the empathy themed exhibit was well received, although there were differences among responses from patients, visitors, and staff. The results imply that hospitals may consider offering prompts to help viewers engage with art to enhance mood and exhibiting art that demonstrates empathy for patient suffering. © The Author(s) 2015.

  8. 8-inch IBM floppy disk

    CERN Multimedia

    1971-01-01

    The 8-inch floppy disk was a magnetic storage disk for the data introduced commercially by IBM in 1971. It was designed by an IBM team as an inexpensive way to load data into the IBM System / 370. Plus it was a read-only bare disk containing 80 KB of data. The first read-write version was introduced in 1972 by Memorex and could contain 175 KB on 50 tracks (with 8 sectors per track). Other improvements have led to various coatings and increased capacities. Finally, it was surpassed by the mini diskette of 5.25 inches introduced in 1976.

  9. University students' views on the utility of psychiatric advance directives.

    Science.gov (United States)

    Scheyett, Anna M; Rooks, Adrienne

    2012-01-01

    Rates of serious mental illnesses (SMIs) among university students are increasing, and universities are struggling with how to respond to students who show SMI symptoms. Psychiatric advance directives (PADs) allow individuals, when well, to document their wishes for treatment during a psychiatric crisis. This project explored the feasibility of using PADs in university settings by examining students' views towards PADs. Forty university students with SMIs were recruited for this study from 1 large university. A mixed-methods design was used, with both quantitative survey instruments and qualitative interviews with students. Respondents were positive about PAD utility for students. Respondents saw PADs as beneficial because PADs gave students control over their treatment. However, students also considered PADs potentially problematic because PAD use raised a risk of breaching student privacy and stigmatizing students with SMIs. Although a promising intervention for students with SMI, this approach requires further research.

  10. SELF-DIRECTED LEARNING, TEAMWORK, HOLISTIC VIEW AND ORAL HEALTH.

    Science.gov (United States)

    Leisnert, Leif

    2014-01-01

    The dental program at the Malmö Dental School, the so called Malmö-model, is guided by four linked principles: self-directed learning, teamwork, a holistic view of patient care, and oral health (Fig.1). Self-assessment ability is a critical competence for healthcare professionals, necessary for the successful adaptation to the modern life-long learning environment. Educational research seems to point out two critical factors for the development of such skills, continuous practice of self-assessment and constructive feedback. The first study presented in this thesis assessed students' self-assessment ability by means of the Interactive Examination in a cohort of senior dental students, who had gone through an identical assessment procedure during their second year of studies. The results indicated that self-assessment ability was not directly relevant to subject knowledge. Upon graduation, there were a number of students (10%) with significant self-assessment difficulties. Early detection of students with weak self-assessment abilities appears possible to achieve. The aim of the second study, concerning teamwork and holistic view, was to investigate if highlighting teamwork between dental and dental hygienist students could improve the students' holistic view on patients, as well as their knowledge of, and insight into, each other's future professions. This project showed that by initiating teamwork between dental and dental hygienist students, it was possible to increase students' knowledge on dental hygienists competence, develop students' perceived holistic view on patients, and prepare students for teamwork. The third study explored findings clinicians used when diagnosing chronic periodontitis. A questionnaire was distributed to students, dental teachers and clinical supervisors in the Public Dental Services. Within all categories of clinicians, the majority of the clinicians used deepened pocket, bone loss on x-rays, and bleeding as findings. There were

  11. Examination of soldier target recognition with direct view optics

    Science.gov (United States)

    Long, Frederick H.; Larkin, Gabriella; Bisordi, Danielle; Dorsey, Shauna; Marianucci, Damien; Goss, Lashawnta; Bastawros, Michael; Misiuda, Paul; Rodgers, Glenn; Mazz, John P.

    2017-10-01

    Target recognition and identification is a problem of great military and scientific importance. To examine the correlation between target recognition and optical magnification, ten U.S. Army soldiers were tasked with identifying letters on targets at 800 and 1300 meters away. Letters were used since they are a standard method for measuring visual acuity. The letters were approximately 90 cm high, which is the size of a well-known rifle. Four direct view optics with angular magnifications of 1.5x, 4x, 6x, and 9x were used. The goal of this approach was to measure actual probabilities for correct target identification. Previous scientific literature suggests that target recognition can be modeled as a linear response problem in angular frequency space using the established values for the contrast sensitivity function for a healthy human eye and the experimentally measured modulation transfer function of the optic. At the 9x magnification, the soldiers could identify the letters with almost no errors (i.e., 97% probability of correct identification). At lower magnification, errors in letter identification were more frequent. The identification errors were not random but occurred most frequently with a few pairs of letters (e.g., O and Q), which is consistent with the literature for letter recognition. In addition, in the small subject sample of ten soldiers, there was considerable variation in the observer recognition capability at 1.5x and a range of 800 meters. This can be directly attributed to the variation in the observer visual acuity.

  12. Augmenting reality in Direct View Optical (DVO) overlay applications

    Science.gov (United States)

    Hogan, Tim; Edwards, Tim

    2014-06-01

    The integration of overlay displays into rifle scopes can transform precision Direct View Optical (DVO) sights into intelligent interactive fire-control systems. Overlay displays can provide ballistic solutions within the sight for dramatically improved targeting, can fuse sensor video to extend targeting into nighttime or dirty battlefield conditions, and can overlay complex situational awareness information over the real-world scene. High brightness overlay solutions for dismounted soldier applications have previously been hindered by excessive power consumption, weight and bulk making them unsuitable for man-portable, battery powered applications. This paper describes the advancements and capabilities of a high brightness, ultra-low power text and graphics overlay display module developed specifically for integration into DVO weapon sight applications. Central to the overlay display module was the development of a new general purpose low power graphics controller and dual-path display driver electronics. The graphics controller interface is a simple 2-wire RS-232 serial interface compatible with existing weapon systems such as the IBEAM ballistic computer and the RULR and STORM laser rangefinders (LRF). The module features include multiple graphics layers, user configurable fonts and icons, and parameterized vector rendering, making it suitable for general purpose DVO overlay applications. The module is configured for graphics-only operation for daytime use and overlays graphics with video for nighttime applications. The miniature footprint and ultra-low power consumption of the module enables a new generation of intelligent DVO systems and has been implemented for resolutions from VGA to SXGA, in monochrome and color, and in graphics applications with and without sensor video.

  13. Ten inch Planar Optic Display

    Energy Technology Data Exchange (ETDEWEB)

    Beiser, L. [Beiser (Leo) Inc., Flushing, NY (United States); Veligdan, J. [Brookhaven National Lab., Upton, NY (United States)

    1996-04-01

    A Planar Optic Display (POD) is being built and tested for suitability as a high brightness replacement for the cathode ray tube, (CRT). The POD display technology utilizes a laminated optical waveguide structure which allows a projection type of display to be constructed in a thin (I to 2 inch) housing. Inherent in the optical waveguide is a black cladding matrix which gives the display a black appearance leading to very high contrast. A Digital Micromirror Device, (DMD) from Texas Instruments is used to create video images in conjunction with a 100 milliwatt green solid state laser. An anamorphic optical system is used to inject light into the POD to form a stigmatic image. In addition to the design of the POD screen, we discuss: image formation, image projection, and optical design constraints.

  14. 10-inch planar optic display

    Science.gov (United States)

    Beiser, Leo; Veligdan, James T.

    1996-05-01

    A planar optic display (POD) is being built and tested for suitability as a high brightness replacement for the cathode ray tube, (CRT). The POD display technology utilizes a laminated optical waveguide structure which allows a projection type of display to be constructed in a thin (1 to 2 inch) housing. Inherent in the optical waveguide is a black cladding matrix which gives the display a black appearance leading to very high contrast. A digital micromirror device, (DMD) from Texas Instruments is used to create video images in conjunction with a 100 milliwatt green solid state laser. An anamorphic optical system is used to inject light into the POD to form a stigmatic image. In addition to the design of the POD screen, we discuss: image formation, image projection, and optical design constraints.

  15. Remote sensing of land surface temperature: The directional viewing effect

    International Nuclear Information System (INIS)

    Smith, J.A.; Schmugge, T.J.; Ballard, J.R. Jr.

    1997-01-01

    Land Surface Temperature (LST) is an important parameter in understanding global environmental change because it controls many of the underlying processes in the energy budget at the surface and heat and water transport between the surface and the atmosphere. The measurement of LST at a variety of spatial and temporal scales and extension to global coverage requires remote sensing means to achieve these goals. Land surface temperature and emissivity products are currently being derived from satellite and aircraft remote sensing data using a variety of techniques to correct for atmospheric effects. Implicit in the commonly employed approaches is the assumption of isotropy in directional thermal infrared exitance. The theoretical analyses indicate angular variations in apparent infrared temperature will typically yield land surface temperature errors ranging from 1 to 4 C unless corrective measures are applied

  16. Metaphor and music emotion: Ancient views and future directions.

    Science.gov (United States)

    Pannese, Alessia; Rappaz, Marc-André; Grandjean, Didier

    2016-08-01

    Music is often described in terms of emotion. This notion is supported by empirical evidence showing that engaging with music is associated with subjective feelings, and with objectively measurable responses at the behavioural, physiological, and neural level. Some accounts, however, reject the idea that music may directly induce emotions. For example, the 'paradox of negative emotion', whereby music described in negative terms is experienced as enjoyable, suggests that music might move the listener through indirect mechanisms in which the emotional experience elicited by music does not always coincide with the emotional label attributed to it. Here we discuss the role of metaphor as a potential mediator in these mechanisms. Drawing on musicological, philosophical, and neuroscientific literature, we suggest that metaphor acts at key stages along and between physical, biological, cognitive, and contextual processes, and propose a model of music experience in which metaphor mediates between language, emotion, and aesthetic response. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. Direct view panel type X-ray image intensifier tube

    International Nuclear Information System (INIS)

    Yang, S.-P.; Robbins, C.D.; Merrit, E.

    1977-01-01

    A panel shaped, proximity type, X-ray image intensifier tube for medical X-ray fluoroscopy use is described. It has all linear components and yet a high brightness gain, in excess of 4,000 cd-sec/m 2 -R, the tube being comprised of a rugged metallic tube envelope, an inwardly concave metallic input window, a directly viewable full size output display screen, and a scintillator-photocathode screen having a thickness of at least 200 microns for a high X-ray photon utilization ability as well as X-ray stopping power, the scintillator-photocathode screen being suspended on insulators within the envelope and in between the input window and the output screen. The scintillator-photocathode screen is spaced from the output screen by at least 8mm to allow the application of a high negative potential at the scintillator-photocathode screen with respect to the output screen for high gain with low field emission, since all of the remaining components within the tube envelope are at neutral potential with respect to the output display screen. (Auth.)

  18. Agreement of Tracing and Direct Viewing Techniques for Cervical Vertebral Maturation Assessment.

    Science.gov (United States)

    Wiwatworakul, Opas; Manosudprasit, Montian; Pisek, Poonsak; Chatrchaiwiwatana, Supaporn; Wangsrimongkol, Tasanee

    2015-08-01

    This study aimed to evaluate agreement among three methods for cervical vertebral maturation (CVM) assessment, comprising direct viewing, tracing only, and tracing with digitized points. Two examiners received training and tests of reliability with each CVM method before evaluation of agreement among methods. The subjects were 96 female-cleft lateral cephalometric radiographs (films of eight subjects for each age ranged from seven to 18 years). The examiners interpreted CVM stages of the subjects with four-week interval between uses of each method. The range of weighted kappa values for paired comparisons among the three methods were: 0.96-0.98 for direct viewing and tracing only comparison; 0.93-0.94 for direct viewing and tracing with digitized points comparison; and 0.96-0.97 for tracing only and tracing with digitized points comparison. The intraclass correlation coefficient (ICC) value among the three methods was 0.95. These results indicated very good agreement among methods. Use of direct viewing is suitable for CVM assessment without spending more time for tracing. However, the three methods might be used interchangeably.

  19. Direct effects of food cues seen during TV viewing on energy intake in young women

    NARCIS (Netherlands)

    Nee, R.L. van; Larsen, J.K.; Fisher, J.O.

    2016-01-01

    Few studies have examined direct effects of food cues presented within television (TV) programs on eating behavior in adults. This research experimentally determined whether exposure to food cues in TV programs affects energy intake during TV viewing among young women, independently from food cues

  20. Views of the Child Reports: Hearing Directly from Children Involved in Post-Separation Disputes

    Directory of Open Access Journals (Sweden)

    Rachel Birnbaum

    2017-09-01

    Full Text Available Views of the Child reports are being increasingly used in Canada and other countries as a means of directly obtaining the child’s perspective on disputes between their parents and/or guardians. The reports provide information about the child’s perspective based on one or more interviews with a social worker. Yet, little research exists about their use and impact, the benefits and limitations of the approach, and less about what factors need to be considered in establishing practices and protocols to safely advance children’s views before the court. This article draws on the direct experiences of 24 children between the ages of 6–17 years about their views and preferences during family breakdown. The children describe how they wanted to speak to someone about their views and preferences, raised questions about the accuracy of the reporting of their views, the need for protecting their confidentiality by having a say of what is included in the report, and their support for children’s participation in decision-making post-separation. Practice, research and policy considerations are also highlighted in order for children’s participation to be truly meaningful to them, their parents and the courts.

  1. Cross View Gait Recognition Using Joint-Direct Linear Discriminant Analysis

    Science.gov (United States)

    Portillo-Portillo, Jose; Leyva, Roberto; Sanchez, Victor; Sanchez-Perez, Gabriel; Perez-Meana, Hector; Olivares-Mercado, Jesus; Toscano-Medina, Karina; Nakano-Miyatake, Mariko

    2016-01-01

    This paper proposes a view-invariant gait recognition framework that employs a unique view invariant model that profits from the dimensionality reduction provided by Direct Linear Discriminant Analysis (DLDA). The framework, which employs gait energy images (GEIs), creates a single joint model that accurately classifies GEIs captured at different angles. Moreover, the proposed framework also helps to reduce the under-sampling problem (USP) that usually appears when the number of training samples is much smaller than the dimension of the feature space. Evaluation experiments compare the proposed framework’s computational complexity and recognition accuracy against those of other view-invariant methods. Results show improvements in both computational complexity and recognition accuracy. PMID:28025484

  2. Cross View Gait Recognition Using Joint-Direct Linear Discriminant Analysis

    Directory of Open Access Journals (Sweden)

    Jose Portillo-Portillo

    2016-12-01

    Full Text Available This paper proposes a view-invariant gait recognition framework that employs a unique view invariant model that profits from the dimensionality reduction provided by Direct Linear Discriminant Analysis (DLDA. The framework, which employs gait energy images (GEIs, creates a single joint model that accurately classifies GEIs captured at different angles. Moreover, the proposed framework also helps to reduce the under-sampling problem (USP that usually appears when the number of training samples is much smaller than the dimension of the feature space. Evaluation experiments compare the proposed framework’s computational complexity and recognition accuracy against those of other view-invariant methods. Results show improvements in both computational complexity and recognition accuracy.

  3. Intraluminal laser speckle rheology using an omni-directional viewing catheter.

    Science.gov (United States)

    Wang, Jing; Hosoda, Masaki; Tshikudi, Diane M; Hajjarian, Zeinab; Nadkarni, Seemantini K

    2017-01-01

    A number of disease conditions in luminal organs are associated with alterations in tissue mechanical properties. Here, we report a new omni-directional viewing Laser Speckle Rheology (LSR) catheter for mapping the mechanical properties of luminal organs without the need for rotational motion. The LSR catheter incorporates multiple illumination fibers, an optical fiber bundle and a multi-faceted mirror to permit omni-directional viewing of the luminal wall. By retracting the catheter using a motor-drive assembly, cylindrical maps of tissue mechanical properties are reconstructed. Evaluation conducted in a test phantom with circumferentially-varying mechanical properties demonstrates the capability of the LSR catheter for the accurate mechanical assessment of luminal organs.

  4. Full scale ambient water flow tests of a 10-inch emergency release coupling for LNG transfer

    NARCIS (Netherlands)

    Putte, L.J. van der; Webber, T.; Bokhorst, E. van; Revell, C.

    2016-01-01

    For LNG transfer in ship-to-ship and ship-to-shore configurations emergency release couplings (F.RC) in combination with loading arms and multi-composite hoses are applied In view of a demand for increasing transfer flow rates in offshore LNG applications a 10-inch ERC has been developed intended

  5. The views of older Malaysians on advanced directive and advanced care planning: a qualitative study.

    Science.gov (United States)

    Htut, Y; Shahrul, K; Poi, P J H

    2007-01-01

    The provision of optimum care for the ageing population is dependent on the understanding of their views and values on end of life issues. A qualitative descriptive study was conducted to describe views of elderly Malaysians on Advanced Care Planning (henceforth ACP) and Advanced Directives (henceforth AD), and explore factors influencing these views. Fifteen elderly subjects with ages ranging from 65 to 83 years, representing different ethnic and religious groups in Malaysia were selected for in-depth interviews guided by a questionnaire. Five core themes were extracted from the interviews: 1) Considering the future 2) Contingency plans for future illnesses 3) Attitudes towards life prolonging treatment procedures 4) Doctor-patient relationships and 5) Influence of religion on decisions related to future illness. Despite the lack of knowledge on ACP and AD, older respondents were very receptive to their concept. Although the majority agreed on the importance of planning for future medical management and having open discussion on end of life issues with their doctor, they felt it unnecessary to make a formal written AD. Most felt that the future was best left to fate or God, and none had made any contingency plan for severe future illnesses citing religion as reason for this view. Cardiopulmonary resuscitation, mechanical ventilation and dialysis were considered by most to be invasive life prolonging treatments. We suggest that doctors initiate discussions on end of life care with every older patient and their family so as to promote awareness and introduce the concept of ACP/AD to a Malaysian setting.

  6. Direct effects of food cues seen during TV viewing on energy intake in young women.

    Science.gov (United States)

    van Nee, Roselinde L; Larsen, Junilla K; Fisher, Jennifer O

    2016-06-01

    Few studies have examined direct effects of food cues presented within television (TV) programs on eating behavior in adults. This research experimentally determined whether exposure to food cues in TV programs affects energy intake during TV viewing among young women, independently from food cues presented in TV advertisements. The experiment involved a 2 (TV program with or without food cues) by 2 (TV advertisements with or without food cues) between-participants design. While watching TV, participants could freely eat peanut chocolate candies and crisps (potato chips). Participants were 121 young women (mean age = 19.6 years; mean BMI = 22.5). Participants who watched a TV program with food cues tended to have a lower total energy intake and ate significantly less peanut chocolate candies than participants who watched the same TV program without food cues. This effect was particularly pronounced among participants with a higher BMI. Food advertisements did not affect energy intake. Findings may indicate that subtle continuous food cues during TV programs could make young females more aware of their own eating and/or weight, leading to reduced intake of particularly sweet snack foods during TV viewing. Considering the non-significant trend for the effect of the TV program with food cues on total energy intake, findings should be replicated to provide possible tools for prevention campaigns using food cue reminders to watch one's intake. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Evaluation of 3 Inch SN-219 Failure and S and SX Tank Farm Saltwell Piping

    International Nuclear Information System (INIS)

    ELSEN, J.J.

    2000-01-01

    Evaluation of direct buried piping currently in use or designated for future Saltwell pumping in S and SX Farms. Documented evaluation of failed S-103 saltwell pumping transfer line 3 inch SN-219. This evaluation is intended to reflect current status of Saltwell piping, when taken in context with referenced documents

  8. Modulating Motor Learning through Transcranial Direct-Current Stimulation: An Integrative View.

    Science.gov (United States)

    Ammann, Claudia; Spampinato, Danny; Márquez-Ruiz, Javier

    2016-01-01

    Motor learning consists of the ability to improve motor actions through practice playing a major role in the acquisition of skills required for high-performance sports or motor function recovery after brain lesions. During the last decades, it has been reported that transcranial direct-current stimulation (tDCS), consisting in applying weak direct current through the scalp, is able of inducing polarity-specific changes in the excitability of cortical neurons. This low-cost, painless and well-tolerated portable technique has found a wide-spread use in the motor learning domain where it has been successfully applied to enhance motor learning in healthy individuals and for motor recovery after brain lesion as well as in pathological states associated to motor deficits. The main objective of this mini-review is to offer an integrative view about the potential use of tDCS for human motor learning modulation. Furthermore, we introduce the basic mechanisms underlying immediate and long-term effects associated to tDCS along with important considerations about its limitations and progression in recent years.

  9. Risk assessment of K Basin twelve-inch and four-inch drain valve failure from a postulated seismic initiating event

    Energy Technology Data Exchange (ETDEWEB)

    MORGAN, R.G.

    1999-06-23

    The Spent Nuclear Fuel (SNF) Project will transfer metallic SNF from the Hanford 105 K-East and 105 K-West Basins to safe interim storage in the Canister Storage Building in the 200 Area. The initial basis for design, fabrication, installation, and operation of the fuel removal systems was that the basin leak rate which could result from a postulated accident condition would not be excessive relative to reasonable recovery operations. However, an additional potential K Basin water leak path is through the K Basin drain valves. Three twelve-inch drain valves are located in the main basin bays along the north wall. Five four-inch drain valves are located in the north and south loadout pits (NLOP and SLOP), the weasel pit, the technical viewing pit, and the discharge chute pit. The sumps containing the valves are filled with concrete which covers the drain valve body. Visual observations indicate that only the valve's bonnet and stem are exposed above the basin concrete floor for the twelve-inch drain valve and that much less of the valve's bonnet and stem are exposed above the basin concrete floor for the five four-inch drain valves. It was recognized, however, that damage of the drain valve bonnet or stem during a seismic initiating event could provide a potential K Basin water leak path. The objectives of this analysis are to: (1) evaluate the likelihood of damaging the three twelve-inch drain valves located along the north wall of the main basin and the five four-inch drain valves located in the pits from a seismic initiating event, and (2) determine the likelihood of exceeding a specific consequence (initial leak rate) from a damaged valve. The analysis process is a risk-based uncertainty analysis where each variable is modeled using available information and engineering judgement. The uncertainty associated with each variable is represented by a probability distribution (probability density function). Uncertainty exists because of the inherent

  10. Sideways Views of the Moon: Mapping Directional Thermal Emission with Diviner

    Science.gov (United States)

    Greenhagen, B. T.; Bandfield, J.; Bowles, N. E.; Hayne, P. O.; Sefton-Nash, E.; Warren, T.; Paige, D. A.

    2017-12-01

    Systematic off-nadir observations can be used to characterize the emission phase function and radiative balance of the lunar surface. These are critical inputs for thermophysical models used to derive surface properties and study a wide range of dynamic surface properties, such as the stability of volatiles and development and evolution of regolith, on the Moon and other airless bodies. After over eight years in operation and well into its 3rd extended science mission, NASA's Lunar Reconnaissance Orbiter (LRO) Diviner Lunar Radiometer (Diviner) continues to reveal the extreme nature of the Moon's thermal environments, thermophysical properties, and surface composition. Diviner data are also used to characterize thermal emission behavior that is fundamental to airless bodies with fine-particulate surfaces, including epiregolith thermal gradients and thermal-scale surface roughness. Diviner's extended operations have provided opportunities to observe the lunar surface with a wide range of viewing geometries. Together Diviner's self-articulation and LRO's non-sun-synchronous polar orbit offer a unique platform to observe the lunar surface and characterize the emission phase behavior and radiative balance. Recently, Diviner completed global off-nadir observations at 50° and 70° in the anti-sun (low phase) direction with 8 different local times each. This fall, we'll begin a third campaign to observe the Moon at 50° emission in the pro-sun (high phase) direction. Here we present this new global off-nadir dataset, highlight models and laboratory experiments used to interpret the data, and describe the role of these data in studying the Moon and other airless bodies.

  11. Value-driven attentional and oculomotor capture during goal-directed, unconstrained viewing.

    Science.gov (United States)

    Anderson, Brian A; Yantis, Steven

    2012-11-01

    Covert shifts of attention precede and direct overt eye movements to stimuli that are task relevant or physically salient. A growing body of evidence suggests that the learned value of perceptual stimuli strongly influences their attentional priority. For example, previously rewarded but otherwise irrelevant and inconspicuous stimuli capture covert attention involuntarily. It is unknown, however, whether stimuli also draw eye movements involuntarily as a consequence of their reward history. Here, we show that previously rewarded but currently task-irrelevant stimuli capture both attention and the eyes. Value-driven oculomotor capture was observed during unconstrained viewing, when neither eye movements nor fixations were required, and was strongly related to individual differences in visual working memory capacity. The appearance of a reward-associated stimulus came to evoke pupil dilation over the course of training, which provides physiological evidence that the stimuli that elicit value-driven capture come to serve as reward-predictive cues. These findings reveal a close coupling of value-driven attentional capture and eye movements that has broad implications for theories of attention and reward learning.

  12. 3D Laser Scanning Assisted by Ordinary Plane Mirror for Non-direct Viewing Area

    Directory of Open Access Journals (Sweden)

    ZHANG Fan

    2017-12-01

    Full Text Available Terrestrial 3D laser scanning is one of principal methods to get the geometric information of object surface,and the integrity of the scanned object is a basic requirement in data acquisition. In order to solve the missing point cloud problem due to the scanning dead angle caused by confined working space,this paper proposes a method using ordinary plane mirror to obtain laser scanning data for non-direct viewing area according to the plane mirror reflection principle,analyzes the influence mechanism of the ordinary plane mirror on the propagation path and distance of laser beam,deduces the coordinate equation of the object point corresponding to the image point reflected by ordinary plane mirror in laser scanning. Given the laser scanning characteristic,this paper introduces a mirror reflection system included target balls and ordinary plane mirror,and expounds the system construction,system calibration and constructing method of system coordinate system. The feasibility and precision of the method are verified by experiments.

  13. Aerosol Research Branch (ARB) 48 inch Lidar Data

    Data.gov (United States)

    National Aeronautics and Space Administration — The ARB_48_IN_LIDAR data set contains data collected from a 48-inch lidar system located at NASA Langley Research Center. Each granule consists of one year of data....

  14. The present state and future direction of primary care: a qualitative study of GPs' views.

    Science.gov (United States)

    Lester, Helen; Campbell, Stephen M; McDonald, Ruth

    2009-12-01

    Over the past decade there has been a sharp increase in the number of non-profit-sharing salaried doctors employed by practices. This has been accompanied by the introduction of mechanisms to facilitate the entry of other providers into the primary care market. To explore the views of GP principals and salaried doctors on current working practices and the future direction of primary care in England. Qualitative study using semi-structured interviews. Twenty-two nationally representative practices across England, between February and August 2007. Interviews were conducted with 22 principals and seven salaried doctors. A topic guide included questions on motivations for working in primary care, descriptions of working lives, the way in which clinical time was spent, and predictions for future working conditions. Significant changes to GP working arrangements were identified, including increasing pursuit of specialist clinical interests by GP principals and increasing employment of salaried GPs. These developments were reported as improving the working lives of principals but also creating a hierarchical structure at practice level that led to resentment among salaried doctors. Many of the salaried GPs felt disenfranchised and disillusioned by the difference in status and autonomy in decision making and the type of work they performed in the practice. Almost all GPs felt uncertain about the future of primary care and were concerned about the potential threat of private providers delivering primary care within the NHS through a largely salaried workforce. By failing to recognise the problems of employing an increasingly disenfranchised salaried labour force, GP principals may be undermining the very ethos of general practice they otherwise advocate and recreating smaller versions of the private provider organisations they suggest threaten to corrode NHS primary care.

  15. 16 CFR 500.19 - Conversion of SI metric quantities to inch/pound quantities and inch/pound quantities to SI...

    Science.gov (United States)

    2010-01-01

    .../pound quantities and inch/pound quantities to SI metric quantities. 500.19 Section 500.19 Commercial... LABELING ACT § 500.19 Conversion of SI metric quantities to inch/pound quantities and inch/pound quantities to SI metric quantities. (a) For calculating the conversion of SI metric quantities to inch/pound...

  16. Development of 52 inches last stage blade for steam turbines

    International Nuclear Information System (INIS)

    Suzuki, Atsuhide; Hisa, Shoichi; Nagao, Shinichiro; Ogata, Hisao

    1986-01-01

    The last stage blades of steam turbines are the important component controlling the power output and performance of plants. In order to realize a unit of large capacity and high efficiency, the proper exhaust area and the last stage blades having good performance are indispensable. Toshiba Corp. has completed the development of the 52 inch last stage blades for 1500 and 1800 rpm steam turbines. The 52 inch last stage blades are the longest in the world, which have the annular exhaust area nearly 1.5 times as much as that of 41 inch blades used for 1100 MW, 1500 rpm turbines in nuclear power stations. By adopting these 52 inch blades, the large capacity nuclear power plants up to 1800 MW can be economically constructed, the rate of heat consumption of 1350 MW plants is improved by 3 ∼ 4 % as compared with 41 inch blades, and in the plants up to 1100 MW, LP turbines can be reduced from three sets to two. The features of 52 inch blades, the flow pattern and blade form design, the structural strength analysis and the erosion withstanding property, and the verification by the rotation test of the actual blades, the performance test using a test turbine, the vibration analysis of the actually loaded blades and the analysis of wet steam behavior are reported. (Kako, I.)

  17. Lowell Observatory's 24-inch Clark Refractor: Its History and Renovation

    Science.gov (United States)

    Schindler, Kevin; Nye, Ralph; Rosenthal, Peter

    2016-01-01

    In 1895, Percival Lowell hired eminent telescope maker Alvan G. Clark to build a 24-inch refractor. Lowell intended the telescope intitally for observing Mars in support of his controversial theories about life on that planet. Clark finished the telescope within a year and at a cost of $20,000. Lowell and his staff of assistants and astronomers began observing through it on July 23, 1896, setting off a long and productive career for the telescope.While Lowell's Mars studies dominated early work with the Clark, V.M. Slipher by the 1910s was using it to observe planetary rotations and atmospheric compositions. He soon revolutionized spectroscopic studies, gathering excruciatingly long spectra - some in excess of 40 hours - of the so-called white nebula and determining startling radial velocities, evidence of an expanding universe. In the 1960s, scientists and artists teamed up on the Clark and created detailed lunar maps in support of the Apollo program.In recent decades, the Clark has played a central role in the education programs at Lowell, with general public audiences, students, and private groups all taking advantage of this unique resource.With this nearly 120 years of contant use, the Clark had been wearing down in recent years. The telescope was becoming more difficult to move, old electrical wiring in the dome was a fire hazard, and many of the telescope's parts needed to be repaired or replaced.In 2013, Lowell Observatory began a fundraising campaign, collecting $291,000 to cover the cost of dome and telescope renovation. Workers removed the entire telescope mount and tube assembly from the dome, examining every part from tube sections to individuals screws. They also stabilized the dome, adding a water vapor barrier and new outer wall while reinforcing the upper dome. The project lasted from January, 2014 through August, 2015. The facility reopened for daytime tours in September, 2015 and evening viewing the following month.

  18. On how we perceive the social world. Criticizing Gallagher's view on direct perception and outlining an alternative.

    Science.gov (United States)

    van Riel, Raphael

    2008-06-01

    Criticizing Gallagher's view on direct perception, I develop a basic model of social perception. According to the Cartesians another person's intentions (and similar properties) are not directly accessible to an observer. According to the cognitivist Cartesians (quasi-)conscious processes are necessary for social understanding. According to the Anti-Cartesians (Gallagher's view) social perception is direct. Since both of these latter approaches face serious problems, I will argue in favor of an alternative: anti-cognitivist Cartesianism. Distinguishing between an active- and a passive part of the perceptual system we can describe the situation as follows: Some functionally individuated parts of our nervous system generate percepts that correspond to the properties that causally trigger the system, whilst others form percepts of properties that do not causally trigger the system. The model is basic in that it merely helps clarifying some of the fundamental concepts we need in order to describe empirical findings.

  19. Improved pointing information for SCIAMACHY from in-flight measurements of the viewing directions towards sun and moon

    Directory of Open Access Journals (Sweden)

    K. Bramstedt

    2017-07-01

    Full Text Available The SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY on Envisat (2002–2012 performed nadir, limb, solar/lunar occultation and various monitoring measurements. The pointing information of the instrument is determined by the attitude information of the Envisat platform with its star trackers together with the encoder readouts of both the azimuth and the elevation scanner of SCIAMACHY. In this work, we present additional sources of attitude information from the SCIAMACHY measurements itself. The basic principle is the same as used by the star tracker: we measure the viewing direction towards celestial objects, i.e. sun and moon, to detect possible mispointings. In sun over limb port observations, we utilise the vertical scans over the solar disk. In horizontal direction, SCIAMACHY's sun follower device (SFD is used to adjust the viewing direction. Moon over limb port measurements use for both the vertical and the horizontal direction the adjustment by the SFD. The viewing direction is steered towards the intensity centroid of the illuminated part of the lunar disk. We use reference images from the USGS Robotic Lunar Observatory (ROLO to take into account the inhomogeneous surface and the variations by lunar libration and phase to parameterise the location of the intensity centroid from the observation geometry. Solar observations through SCIAMACHY's so-called sub-solar port (with a viewing direction closely to zenith also use the SFD in the vertical direction. In the horizontal direction the geometry of the port defines the viewing direction. Using these three type of measurements, we fit improved mispointing parameters by minimising the pointing offsets in elevation and azimuth. The geolocation of all retrieved products will benefit from this; the tangent heights are especially improved. The altitudes assigned to SCIAMACHY's solar occultation measurements are changed in the range of −130 to −330 m, the lunar

  20. Improved pointing information for SCIAMACHY from in-flight measurements of the viewing directions towards sun and moon

    Science.gov (United States)

    Bramstedt, Klaus; Stone, Thomas C.; Gottwald, Manfred; Noël, Stefan; Bovensmann, Heinrich; Burrows, John P.

    2017-07-01

    The SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY) on Envisat (2002-2012) performed nadir, limb, solar/lunar occultation and various monitoring measurements. The pointing information of the instrument is determined by the attitude information of the Envisat platform with its star trackers together with the encoder readouts of both the azimuth and the elevation scanner of SCIAMACHY. In this work, we present additional sources of attitude information from the SCIAMACHY measurements itself. The basic principle is the same as used by the star tracker: we measure the viewing direction towards celestial objects, i.e. sun and moon, to detect possible mispointings. In sun over limb port observations, we utilise the vertical scans over the solar disk. In horizontal direction, SCIAMACHY's sun follower device (SFD) is used to adjust the viewing direction. Moon over limb port measurements use for both the vertical and the horizontal direction the adjustment by the SFD. The viewing direction is steered towards the intensity centroid of the illuminated part of the lunar disk. We use reference images from the USGS Robotic Lunar Observatory (ROLO) to take into account the inhomogeneous surface and the variations by lunar libration and phase to parameterise the location of the intensity centroid from the observation geometry. Solar observations through SCIAMACHY's so-called sub-solar port (with a viewing direction closely to zenith) also use the SFD in the vertical direction. In the horizontal direction the geometry of the port defines the viewing direction. Using these three type of measurements, we fit improved mispointing parameters by minimising the pointing offsets in elevation and azimuth. The geolocation of all retrieved products will benefit from this; the tangent heights are especially improved. The altitudes assigned to SCIAMACHY's solar occultation measurements are changed in the range of -130 to -330 m, the lunar occultation

  1. Feeling superior is a bipartisan issue: extremity (not direction) of political views predicts perceived belief superiority.

    Science.gov (United States)

    Toner, Kaitlin; Leary, Mark R; Asher, Michael W; Jongman-Sereno, Katrina P

    2013-12-01

    Accusations of entrenched political partisanship have been launched against both conservatives and liberals. But is feeling superior about one's beliefs a partisan issue? Two competing hypotheses exist: the rigidity-of-the-right hypothesis (i.e., conservatives are dogmatic) and the ideological-extremism hypothesis (i.e., extreme views on both sides predict dogmatism). We measured 527 Americans' attitudes about nine contentious political issues, the degree to which they thought their beliefs were superior to other people's, and their level of dogmatism. Dogmatism was higher for people endorsing conservative views than for people endorsing liberal views, which replicates the rigidity-of-the-right hypothesis. However, curvilinear effects of ideological attitude on belief superiority (i.e., belief that one's position is more correct than another's) supported the ideological-extremism hypothesis. Furthermore, responses reflecting the greatest belief superiority were obtained on conservative attitudes for three issues and liberal attitudes for another three issues. These findings capture nuances in the relationship between political beliefs and attitude entrenchment that have not been revealed previously.

  2. NUFFT-Based Iterative Image Reconstruction via Alternating Direction Total Variation Minimization for Sparse-View CT

    Directory of Open Access Journals (Sweden)

    Bin Yan

    2015-01-01

    Full Text Available Sparse-view imaging is a promising scanning method which can reduce the radiation dose in X-ray computed tomography (CT. Reconstruction algorithm for sparse-view imaging system is of significant importance. The adoption of the spatial iterative algorithm for CT image reconstruction has a low operation efficiency and high computation requirement. A novel Fourier-based iterative reconstruction technique that utilizes nonuniform fast Fourier transform is presented in this study along with the advanced total variation (TV regularization for sparse-view CT. Combined with the alternating direction method, the proposed approach shows excellent efficiency and rapid convergence property. Numerical simulations and real data experiments are performed on a parallel beam CT. Experimental results validate that the proposed method has higher computational efficiency and better reconstruction quality than the conventional algorithms, such as simultaneous algebraic reconstruction technique using TV method and the alternating direction total variation minimization approach, with the same time duration. The proposed method appears to have extensive applications in X-ray CT imaging.

  3. Introducing consumer directed care in residential care settings for older people in Australia: views of a citizens' jury.

    Science.gov (United States)

    Laver, Kate; Gnanamanickam, Emmanuel; Whitehead, Craig; Kurrle, Susan; Corlis, Megan; Ratcliffe, Julie; Shulver, Wendy; Crotty, Maria

    2018-01-01

    Objectives Health services worldwide are increasingly adopting consumer directed care approaches. Traditionally, consumer directed care models have been implemented in home care services and there is little guidance as to how to implement them in residential care. This study used a citizens' jury to elicit views of members of the public regarding consumer directed care in residential care. Methods A citizens' jury involving 12 members of the public was held over two days in July 2016, exploring the question: For people with dementia living in residential care facilities, how do we enable increased personal decision making to ensure that care is based on their needs and preferences? Jury members were recruited through a market research company and selected to be broadly representative of the general public. Results The jury believed that person-centred care should be the foundation of care for all older people. They recommended that each person's funding be split between core services (to ensure basic health, nutrition and hygiene needs are met) and discretionary services. Systems needed to be put into place to enable the transition to consumer directed care including care coordinators to assist in eliciting resident preferences, supports for proxy decision makers, and accreditation processes and risk management strategies to ensure that residents with significant cognitive impairment are not taken advantage of by goods and service providers. Transparency should be increased (perhaps using technologies) so that both the resident and nominated family members can be sure that the person is receiving what they have paid for. Conclusions The views of the jury (as representatives of the public) were that people in residential care should have more say regarding the way in which their care is provided and that a model of consumer directed care should be introduced. Policy makers should consider implementation of consumer directed care models that are economically viable

  4. DSM-5: a collection of psychiatrist views on the changes, controversies, and future directions

    Science.gov (United States)

    2013-01-01

    The recent release of the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) by the American Psychiatric Association has led to much debate. For this forum article, we asked BMC Medicine Editorial Board members who are experts in the field of psychiatry to discuss their personal views on how the changes in DSM-5 might affect clinical practice in their specific areas of psychiatric medicine. This article discusses the influence the DSM-5 may have on the diagnosis and treatment of autism, trauma-related and stressor-related disorders, obsessive-compulsive and related disorders, mood disorders (including major depression and bipolar disorders), and schizophrenia spectrum disorders. PMID:24229007

  5. Multiple-view spectrally resolved x-ray imaging observations of polar-direct-drive implosions on OMEGA

    Energy Technology Data Exchange (ETDEWEB)

    Mancini, R. C.; Johns, H. M.; Joshi, T.; Mayes, D.; Nagayama, T. [Physics Department, University of Nevada, Reno, Nevada 89557 (United States); Hsu, S. C.; Baumgaertel, J. A.; Cobble, J.; Krasheninnikova, N. S.; Bradley, P. A.; Hakel, P.; Murphy, T. J.; Schmitt, M. J.; Shah, R. C.; Tregillis, I. L.; Wysocki, F. J. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

    2014-12-15

    We present spatially, temporally, and spectrally resolved narrow- and broad-band x-ray images of polar-direct-drive (PDD) implosions on OMEGA. These self-emission images were obtained during the deceleration phase and bang time using several multiple monochromatic x-ray imaging instruments fielded along two or three quasi-orthogonal lines-of-sight, including equatorial and polar views. The instruments recorded images based on K-shell lines from a titanium tracer located in the shell as well as continuum emission. These observations constitute the first such data obtained for PDD implosions. The image data show features attributed to laser imprinting and zero-order hydrodynamics. Equatorial-view images show a “double bun” structure that is consistent with synthetic images obtained from post-processing 2D and 3D radiation-hydrodynamic simulations of the experiment. Polar-view images show a pentagonal, petal pattern that correlates with the PDD laser illumination used on OMEGA, thus revealing a 3D aspect of PDD OMEGA implosions not previously observed. Differences are noted with respect to a PDD experiment performed at National Ignition Facility.

  6. Freud's views on early female sexuality in the light of direct child observation.

    Science.gov (United States)

    Kleeman, J A

    1976-01-01

    Freud's writings on early female sexuality are reviewed in order to demonstrate which of his central assumptions are supported and which have been corrected by the direct observation of young children. The study of the emergence of core gender identity in little girls is a key to the modification of Freud's statements on the onset of and crucial factors in the development of femininity. Cognitive functions, learning experiences, and language are believed to be more important than Freud stressed, and penis envy and feelings of inferiority are relegated to a less universal and less necessary place in the onset of femininity. The role of the father is given different emphasis. Direct observation clarifies many aspects of masturbation or early genital self-stimulation in the young female: its onset; its feminine rather than masculine character; its early vicissitudes; its importance relative to other behavior; the impact of the discovery of anatomical difference; one special way it is affected by parental attitude; and how it contrasts with comparable behavior in the young male. Observation refutes Freud's often quoted statement that masturbation is further removed from the nature of women than of men.

  7. A Christian philosopher's view of recent directions in the abortion debate.

    Science.gov (United States)

    Lee, Patrick

    2004-01-01

    From the standpoint of a Christian philosopher, heeding the teaching and exhortations of Pope John Paul II and previous popes, I examine three directions in which the recent philosophical debate has developed. In the last seven or eight years there has been 1) a renewed focus on the biological issue of when a human individual comes to be, 2) new arguments for the proposition that personhood is a characteristic acquired after birth, and 3) refinements of the early argument of Judith Thomson. Replying to these developments, I defend, on philosophical grounds, the pro-life position. I argue that a distinct, whole (though immature) human individual comes to be at conception, that he or she is a person, with full moral worth, from the moment he or she comes to be, and the mothers and fathers have a special responsibility to their children which entails (at least) that they ought not to choose to abort them. I conclude by briefly indicating, from the standpoint of Christian faith, why Christian philosophers should vigorously pursue this debate.

  8. Production of medical radioisotopes in ORNL 86-Inch Cyclotron

    International Nuclear Information System (INIS)

    Skidmore, M.R.

    1975-01-01

    Procedures, targets, and costs are discussed for the production of iodine-123 at the ORNL 86-Inch Cyclotron. The cyclotron is a fixed frequency machine producing 22-MeV proton beams with currents of 3 mA. Flat plate targets are used in the bombardment of readily fabricated metals when highest production rates are necessary, while capsule targets are used when flat plate coatings are difficult or when high production rates are not required. Window targets with metal foils or powders, inorganic compounds, or isotopically enriched materials are also used. (PMA)

  9. Remote target removal for the Oak Ridge 86-inch Cyclotron

    International Nuclear Information System (INIS)

    Walls, A.A.

    1982-01-01

    A remotely operated target remover has been plaed in operation at the 86-Inch Cyclotron located in Oak Ridge. The system provides for the remote removal of a target from inside the cyclotron, loading it into a cask, and the removal of the cask from the 1.5 m (5-ft) shielding walls. The remote system consists of multiple electrical and pneumatically operated equipment which is designed for controlled step-by-step operation, operated with an electrical control panel, and monitored by a television system. The target remover has reduced the radiation exposures to operating personnel at the facility and has increased the effective operating time. The system is fast, requires a minimum of skill to operate, and has demonstrated both reliability and durability

  10. Seismic fragility test of a 6-inch diameter pipe system

    International Nuclear Information System (INIS)

    Chen, W.P.; Onesto, A.T.; DeVita, V.

    1987-02-01

    This report contains the test results and assessments of seismic fragility tests performed on a 6-inch diameter piping system. The test was funded by the US Nuclear Regulatory Commission (NRC) and conducted by ETEC. The objective of the test was to investigate the ability of a representative nuclear piping system to withstand high level dynamic seismic and other loadings. Levels of loadings achieved during seismic testing were 20 to 30 times larger than normal elastic design evaluations to ASME Level D limits would permit. Based on failure data obtained during seismic and other dynamic testing, it was concluded that nuclear piping systems are inherently able to withstand much larger dynamic seismic loadings than permitted by current design practice criteria or predicted by the probabilistic risk assessment (PRA) methods and several proposed nonlinear methods of failure analysis

  11. The impact of the European Working Time Directive 10 years on: views of the UK medical graduates of 2002 surveyed in 2013-2014.

    Science.gov (United States)

    Lambert, Trevor W; Smith, Fay; Goldacre, Michael J

    2016-03-01

    To report doctors' views about the European Working Time Directive ('the Directive'). Survey of the medical graduates of 2002 (surveyed in 2013-2014). Medical graduates. UK. Questions on views about the Directive. The response rate was 64% (2056/3196). Twelve per cent of respondents agreed that the Directive had benefited senior doctors, 39% that it benefited junior doctors, and 17% that it had benefited the NHS. More women (41%) than men (35%) agreed that the Directive had benefited junior doctors. Surgeons (6%) and adult medical specialists (8%) were least likely to agree that the Directive had benefited senior doctors. Surgeons (20%) were less likely than others to agree that the Directive had benefited junior doctors, whilst specialists in emergency medicine (57%) and psychiatry (52%) were more likely to agree. Surgeons (7%) were least likely to agree that the Directive had benefited the NHS. Most respondents (62%) reported a positive effect upon work-life balance. With regard to quality of patient care, 45% reported a neutral effect, 40% reported a negative effect, and 15% a positive effect. Most respondents (71%) reported a negative effect of the Directive on continuity of patient care, and 71% felt that the Directive had a negative effect upon junior doctors' training opportunities. Fifty-two per cent reported a negative effect on efficiency in managing patient care. Senior doctors agreed that the Directive benefited doctors' work-life balance. In other respects, they were more negative about it. Surgeons were the least positive about aspects of the Directive.

  12. Development and characterization of a CCD camera system for use on six-inch manipulator systems

    International Nuclear Information System (INIS)

    Logory, L.M.; Bell, P.M.; Conder, A.D.; Lee, F.D.

    1996-01-01

    The Lawrence Livermore National Laboratory has designed, constructed, and fielded a compact CCD camera system for use on the Six Inch Manipulator (SIM) at the Nova laser facility. The camera system has been designed to directly replace the 35 mm film packages on all active SIM-based diagnostics. The unit's electronic package is constructed for small size and high thermal conductivity using proprietary printed circuit board technology, thus reducing the size of the overall camera and improving its performance when operated within the vacuum environment of the Nova laser target chamber. The camera has been calibrated and found to yield a linear response, with superior dynamic range and signal-to-noise levels as compared to T-Max 3200 optic film, while providing real-time access to the data. Limiting factors related to fielding such devices on Nova will be discussed, in addition to planned improvements of the current design

  13. Exploring Student Teachers' Views on ePortfolios as an Empowering Tool to Enhance Self-Directed Learning in an Online Teacher Education Course

    Science.gov (United States)

    van Wyk, Micheal M.

    2017-01-01

    This paper explores Economics student teachers' views on ePortfolios as an empowering tool to enhance self-directed learning in an online teacher education course. An interpretive phenomenological research approach was employed for data collection and a purposive convenient sampling technique was selected to collect data. Only Postgraduate…

  14. Development of 8-inch Key Processes for Insulated-Gate Bipolar Transistor

    Directory of Open Access Journals (Sweden)

    Guoyou Liu

    2015-09-01

    Full Text Available Based on the construction of the 8-inch fabrication line, advanced process technology of 8-inch wafer, as well as the fourth-generation high-voltage double-diffused metal-oxide semiconductor (DMOS+ insulated-gate bipolar transistor (IGBT technology and the fifth-generation trench gate IGBT technology, have been developed, realizing a great-leap forward technological development for the manufacturing of high-voltage IGBT from 6-inch to 8-inch. The 1600 A/1.7 kV and 1500 A/3.3 kV IGBT modules have been successfully fabricated, qualified, and applied in rail transportation traction system.

  15. 16 CFR 460.20 - R-value per inch claims.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false R-value per inch claims. 460.20 Section 460.20 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION § 460.20 R-value per inch claims. In labels, fact sheets, ads, or other promotional...

  16. Orthopedic stretcher with average-sized person can pass through 18-inch opening

    Science.gov (United States)

    Lothschuetz, F. X.

    1966-01-01

    Modified Robinson stretcher for vertical lifting and carrying, will pass through an opening 18 inches in diameter, while containing a person of average height and weight. A subject 6 feet tall and weighing 200 pounds was lowered and raised out of an 18 inch diameter opening in a tank to test the stretcher.

  17. Torque expression of 0.018 and 0.022 inch conventional brackets

    NARCIS (Netherlands)

    Sifakakis, I.; Pandis, N.; Makou, M.; Eliades, T.; Katsaros, C.; Bourauel, C.

    2013-01-01

    The aim of this study was to assess the effect of the moments generated with low- and high-torque brackets. Four different bracket prescription-slot combinations of the same bracket type (Mini Diamond(R) Twin) were evaluated: high-torque 0.018 and 0.022 inch and low-torque 0.018 and 0.022 inch.

  18. Comparison of silicon strip tracker module size using large sensors from 6 inch wafers

    CERN Multimedia

    Honma, Alan

    1999-01-01

    Two large silicon strip sensor made from 6 inch wafers are placed next to each other to simulate the size of a CMS outer silicon tracker module. On the left is a prototype 2 sensor CMS inner endcap silicon tracker module made from 4 inch wafers.

  19. Test procedure for the Master-Lee and the modified Champion four inch hydraulic cutters

    International Nuclear Information System (INIS)

    Crystal, J.B.

    1995-01-01

    The Master-Lee and the modified Champion 4 Inch hydraulic cutters are being retested to gather and document information related to the following: determine if the Master-Lee cutters will cut the trunnions of an Aluminum fuel canister and a Stainless Steel fuel canister; determine if the Master-Lee cutters will cut 1 1/2 inch diameter fire hose; determine if the modified Champion 4 inch blade will cut sections of piping; and determine the effectiveness of the centering device for the Champion 4 Inch cutters. Determining the limitations of the hydraulic cutter will aid in the process of debris removal in the K-Basin. Based on a previous test, the cutters were returned to the manufacturer for modifications. The modifications to the Champion 4 Inch Cutter and further testing of the Master-Lee Cutter are the subjects of these feature tests

  20. Assisted living facility administrator and direct care staff views of resident mental health concerns and staff training needs.

    Science.gov (United States)

    Dakin, Emily; Quijano, Louise M; McAlister, Courtney

    2011-01-01

    This community needs assessment surveyed 21 administrators and 75 direct care staff at 9 larger and 12 smaller assisted living facilities (ALFs) regarding perceptions of resident mental health concerns, direct care staff capacity to work with residents with mental illness, and direct care staff training needs. Group differences in these perceptions were also examined. Both administrators and directcare staff indicated that direct care staff would benefit from mental health-related training, and direct care staff perceived themselves as being more comfortable working with residents with mental illness than administrators perceived them to be. Implications for gerontological social work are discussed.

  1. The role of television viewing and direct experience in predicting adolescents' beliefs about the health risks of fast-food consumption.

    Science.gov (United States)

    Russell, Cristel Antonia; Buhrau, Denise

    2015-09-01

    Fast-food advertising abounds on television (TV), and programs targeting youth often display fast-food consumption but rarely with any negative consequences. Cultivation research maintains that cumulative exposure to TV influences audiences' views of and beliefs about the real world. Thus, the amount of TV adolescents watch is likely to bias their views of the consequences of eating fast food. This research posits that this relationship varies as a function of adolescents' actual experience with fast food. Two cross-sectional surveys conducted in the cultivation research tradition assess the relationship between the amount of adolescents' regular exposure to TV and their beliefs about the risks and benefits of eating fast food. Teenage children of members of online panels reported hours of TV viewing, beliefs about the consequences of eating fast food, and their frequency of fast-food consumption. In both studies, beliefs about health risks of fast-food consumption vary as a function of the amount of TV watched. Heavy TV viewers have less negative and more positive beliefs about the consequences of fast-food consumption than light viewers. As direct experience with fast food increases, the relationship between TV viewing and risk perceptions weakens, but the relationship between TV viewing and positive perceptions strengthens. These moderated relationships remain when we control for physical activity (Study 1) and the density of fast-food restaurants in respondents' geographical area (Study 2). Given the role of TV viewing in biasing perceptions of the consequences of eating fast food, public health researchers and practitioners should carefully monitor and perhaps regulate the amount of fast-food advertising on TV and the content of TV programs. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. MT. BIGELOW 61-INCH IMAGES OF 9P/TEMPEL 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set contains 6 images of 9P/Tempel 1 obtained on five nights in 1994 using a visual CCD mounted on the 61-inch Kuiper telescope of the Mt. Bigelow...

  3. Project W320 52-inch diameter equipment container load test: Test report

    International Nuclear Information System (INIS)

    Bellomy, J.R.

    1995-01-01

    This test report summarizes testing activities and documents the results of the load tests performed on-site and off-site to structural qualify the 52-inch equipment containers designed and fabricated under Project W-320

  4. Direct laryngoscopy after potential difficult intubation in children only predicts standard Cormack and Lehane view to within one grade.

    Science.gov (United States)

    Chambers, Neil A; Hullett, Bruce

    2013-11-01

    Some techniques used to achieve intubation in children predicted to have a difficult airway do not involve direct laryngoscopy or assessment of the laryngeal grade. Direct laryngoscopy may therefore be performed immediately after intubation to provide a record for future anesthetics. It is unknown whether this postintubation grade accurately reflects the standard laryngeal grade in this group. The aim of the study was to identify those children who were predicted to be a difficult intubation and to perform direct laryngoscopy before and after intubation. We set out to ascertain if direct laryngoscopy performed after intubation could accurately predict the standard un-intubated laryngeal grade in this group. All children presenting for general anesthesia who were clinically predicted to be a difficult intubation were considered for this study and prospectively recruited. After induction of anesthesia, one study anesthetist performed direct laryngoscopy before and another study anesthetist then performed direct laryngoscopy after intubation. These laryngeal grades were then compared. A total of 21 children were successfully recruited and studied, and all patients were successfully intubated. Overall, the postintubation grade did not reliably reflect the standard grade, but did not differ by more than one grade in any patient. In one-third of subjects, the postintubation grade was equal to the standard grade, in one-third it was a grade 'easier' and in one-third a grade 'harder'. Assessment and documentation of a postintubation laryngeal grade does not appear to provide reliable information for future anesthetics and may even have the potential to be misleading. Any such documentation should always refer to the presence of an endotracheal tube and be interpreted with caution. © 2013 John Wiley & Sons Ltd.

  5. Education, training and continuing professional development for the medical physicist - The EFOMP view in relation to EC Council directives

    International Nuclear Information System (INIS)

    Lamm, I.L.

    2001-01-01

    The European Federation of Organisations for Medical Physics, EFOMP, is an umbrella organisation for National Medical Physics Organisations. One of the main objectives of EFOMP is to harmonise and promote the best practice of Medical Physics within Europe. To accomplish this goal, EFOMP has presented various recommendations and guidelines in a number of Policy Statements, unanimously adopted by EFOMP Member Organisations. Policy Statement No 9, 'Radiation Protection of the Patient in Europe: The Training of the Medical Physics Expert in Radiation Physics or Radiation Technology', is the EFOMP response to the Medical Exposure Directive, 97/43/Euratom. Here EFOMP presents its recommendations on the role and the competence requirements of the Medical Physics Expert, defined in this Directive, together with recommendations on education, training and Continuing Professional Development. The previous Directive 96/29/Euratom, the Basic Safety Standards Directive, defines a 'Qualified Expert' in the radiation protection of workers and the general public. EFOMP has an ongoing discussion on the interpretation of the competence requirements of the Qualified Expert in medical practice. The EFOMP approach to achieve harmonisation in the qualification of the Medical Physicist is to encourage the establishment of education and training schemes according to EFOMP recommendations. (author)

  6. A generalized view of self-citation: direct, co-author, collaborative, and coercive induced self-citation.

    Science.gov (United States)

    Ioannidis, John P A

    2015-01-01

    The phenomenon of self-citation can present in many different forms, including direct, co-author, collaborative, and coercive induced self-citation. It can also pertain to the citation of single scientists, groups of scientists, journals, and institutions. This article presents some case studies of extreme self-citation practices. It also discusses the implications of different types of self-citation. Self-citation is not necessarily inappropriate by default. In fact, usually it is fully appropriate but often it is even necessary. Conversely, inappropriate self-citation practices may be highly misleading and may distort the scientific literature. Coercive induced self-citation is the most difficult to discover. Coercive Induced self-citation may happen directly from reviewers of articles, but also indirectly from reviewers of grants, scientific advisors who steer a research agenda, and leaders of funding agencies who may espouse spending disproportionately large funds in research domains that perpetuate their own self-legacy. Inappropriate self-citation can be only a surrogate marker of what might be much greater distortions of the scientific corpus towards conformity to specific opinions and biases. Inappropriate self-citations eventually affect also impact metrics. Different impact metrics vary in the extent to which they can be gamed through self-citation practices. Citation indices that are more gaming-proof are available and should be more widely used. We need more empirical studies to dissect the impact of different types of inappropriate self-citation and to examine the effectiveness of interventions to limit them. Copyright © 2014. Published by Elsevier Inc.

  7. Development of gamma spectroscopy employing NaI(Tl) detector 3 inch x 3 inch and readout electronic of flash-ADC/FPGA-based technology

    Energy Technology Data Exchange (ETDEWEB)

    Hai, Vo Hong [HCMC-National Univ., Hochiminh City (Viet Nam). Inst. of Nuclear Physics; Ton Duc Thang Univ., Ho Chi Minh City (Viet Nam). Div. of Nuclear Physics; Hung, Nguyen Quoc [HCMC-National Univ., Hochiminh City (Viet Nam). Inst. of Nuclear Physics; Khai, Bui Tuan [Osaka Univ. (Japan). Dept. of Physics

    2015-05-15

    n this article the development of a gamma spectroscopy system is described using a scintillation detector NaI(Tl) of 3 inch x 3 inch. The readout electronic for the spectroscopy is built from the fast analog-digital conversion of Flash Analog-Digital Converter (Flash-ADC) 250 MHz - 8 bits resolution, and the embedded Field-Programmable Gate Array (FPGA) technology. The embedded VHSIC Hardware Description Language (VHDL) code for FPGA is built in such a way that it works as a multi channel analyser (MCA) with 4096 Digital Charge Integration (DCI) channels. A pulse generator with frequency varying from Hz up to 12 kHz is used to evaluate the time response of the system. Two standard radioisotope sources of {sup 133}Ba and {sup 152}Eu with multi gamma energies ranging from several tens keV to MeV are used to evaluate the linearity and energy resolution of the system.

  8. Am/Cm TTR testing - 3/8-inch glass beads evaluation in CIM5

    International Nuclear Information System (INIS)

    Witt, D. C.

    2000-01-01

    To facilitate the procurement and handling of the glass former for Am/Cm vitrification in the F-Canyon MPPF, 1/4 inch and 3/8 inch diameter glass beads were purchased from Corning for evaluation in the 5 inch Cylindrical Induction Melter (CIM5). Prior to evaluating the beads in the CIM5, tests were conducted in the Drain Tube Test Stand (DTTS) with 1/4 inch beads, 3/8 inch beads, and a 50/50 mixture to identify any process concerns. Results of the DTTS tests are summarized in Attachment 1. A somewhat larger volume expansion was experienced in all three DTTS runs as compared to a standard run using cullet. Further testing of the use of glass beads in the CIM5 was requested by the Design Authority as Task 1.02 of Technical Task Request 99-MNSS/SE-006. Since the Technical Task Plan was not yet approved, the completion of this task was conducted under an authorization request approved by the SRTC Laboratory Director, S. Wood. This request is included as Attachment 2

  9. Current and future directions in Medi-Cal chronic disease care management: a view from the top.

    Science.gov (United States)

    Goldman, L Elizabeth; Handley, Margaret; Rundall, Thomas G; Schillinger, Dean

    2007-05-01

    To determine the extent to which Medicaid managed care (MMC) organizations are engaged in chronic disease care management (CDCM), tailor CDCM for diverse populations, or plan to expand CDCM. Web-based survey of 23 eligible California MMC health plan executives in fall 2005. Frequency distributions of survey responses. Nineteen (83%) of 23 executives responded, representing 2.5 million beneficiaries. Eighteen (95%) MMC plans reported implementing 1 or more elements of CDCM. Although plans used a wide range of CDCM strategies to reach performance goals, most implemented provider awareness activities such as offering guidelines or disease-specific feedback to physician groups. More than half of the plans reported interest in expanding CDCM to include more active interventions such as disease registries, pay for performance, telephone counseling to patients, and other self-management support programs. Few plans reported tailoring their CDCM to vulnerable member populations such as those with limited literacy or limited English proficiency. Executives reported that insufficient financial resources at the plan level, lack of organizational leadership and commitment in physician organizations, and limited information technology in physician offices were barriers to CDCM expansion. California MMC health plans reported substantial interest in CDCM and a desire to increase CDCM. Representatives reported intentions to expand to strategies that more directly engage providers and patients. To ensure that the growing number of vulnerable enrollees with chronic disease receive high-quality care, policy efforts should focus on enabling MMC health plans to more consistently implement and target population-based strategies such as CDCM.

  10. A global view on ARAMIS, a risk assessment methodology for industries in the framework of the SEVESO II directive

    International Nuclear Information System (INIS)

    Salvi, Olivier; Debray, Bruno

    2006-01-01

    The ARAMIS methodology was developed in an European project co-funded in the fifth Framework Programme of the European Commission with the objective to answer the specific requirements of the SEVESO II directive. It offers an alternative to purely deterministic and probabilistic approaches to risk assessment of process plants. It also answers the needs of the various stakeholders interested by the results of the risk assessment for land use or emergency planning, enforcement or, more generally, public decision-making. The methodology is divided into the following major steps: identification of major accident hazards (MIMAH), identification of the safety barriers and assessment of their performances, evaluation of safety management efficiency to barrier reliability, identification of reference accident scenarios (MIRAS), assessment and mapping of the risk severity of reference scenarios and of the vulnerability of the plant surroundings. The methodology was tested during five case studies, which provided useful information about the applicability of the method and, by identifying the most sensitive parts of it opened way to new research activity for an improved industrial safety

  11. Comparision of Incidental Reflection From Containerized Maintenance/Housekeeping Solutions and One Inch of Water

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, Bryan Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); MacQuigg, Michael Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Wysong, Andrew Russell [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-15

    This document addresses the incidental reflector reactivity worth of containerized maintenance/housekeeping fluids for use in PF-4 at Los Alamos National Laboratory (LANL). The intent of the document is to analyze containerized maintenance/housekeeping fluids which will be analyzed as water that may be present under normal conditions of an operation. The reactivity worth is compared to the reactivity worth due to I-inch of close-fitting 4n water reflection and I-inch of close-fitting radial water reflection. Both have been used to bound incidental reflection by 2-liter bottles in criticality safety evaluations. The conclusion is that, when the maintenance/housekeeping fluids are containerized the reactivity increase from a configuration which is bounding of normal conditions (up to eight bottles modeled with 2-liters of solution at varying diameter) is bound by I-inch of close fitting 4n water relection.

  12. Usefulness of Ultrasound View of Larynx in Pre-Anesthetic Airway Assessment: A Comparison With Cormack-Lehane Classification During Direct Laryngoscopy.

    Science.gov (United States)

    Soltani Mohammadi, Sussan; Saliminia, Alireza; Nejatifard, Nasim; Azma, Roxana

    2016-12-01

    One of the main challenges in anesthesiology is difficult intubation. There are many anatomical parameters for evaluating the feasibility of tracheal intubation; one that can reliably predict a difficult intubation is the Cormack-Lehane classification obtained during direct laryngoscopy. This is an invasive procedure that cannot be performed in an awake patient or for pre-anesthetic airway assessments in patients with no prior history of tracheal intubation. Recently, ultrasound has been successfully used for several airway-related applications. The aim of this study was to compare and correlate the ultrasound view of the larynx with the Mallampati classification before anesthesia and the Cormack-Lehane classification during direct laryngoscopy under general anesthesia. This cross-sectional descriptive-analytic study included 53 ASA class I - III patients aged 18 - 70 years who were scheduled for tracheal intubation under general anesthesia. Before anesthesia, an oblique transverse ultrasound view of the airway was obtained; in addition, the total time taken to achieve the final plane, the depth of the pre-epiglottic space, and the distance from the epiglottis to the mid-point between the vocal cords were all recorded. The ultrasound measurements were then compared with the Mallampati class on the preoperative evaluation and with the Cormack-Lehane grade during direct laryngoscopy under general anesthesia. It was observed that correlations between the pre-epiglottic space (PE) and Cormack-Lehane grades I, II, and III were weak. Correlations between the distance from the epiglottis to the vocal cords (E-VC) and Cormack-Lehane grades I, II, and III were also weak. The PE/E-VC ratio for correlations between the sonographic view and laryngoscopy had 87.5% sensitivity and 30% specificity. There was no correlation between Mallampati class and the PE/E-VC ratio (P = 0.566). Our study revealed weak correlation between PE/E-VC and Cormack-Lehane grade, with 87% sensitivity

  13. Interim results: fines recycle testing using the 4-inch diameter primary graphite burner

    International Nuclear Information System (INIS)

    Palmer, W.B.

    1975-05-01

    The results of twenty-two HTGR primary burner runs in which graphite fines were recycled pneumatically to the 4-inch diameter pilot-plant primary fluidized-bed burner are described. The result of the tests showed that zero fines accumulation can easily be achieved while operating at plant equivalent burn rates. (U.S.)

  14. Primary care patients' views and decisions about, experience of and reactions to direct-to-consumer genetic testing: a longitudinal study.

    Science.gov (United States)

    Wasson, Katherine; Sanders, Tonya Nashay; Hogan, Nancy S; Cherny, Sara; Helzlsouer, Kathy J

    2013-10-01

    Little is known about the decisions and perspectives of participants undergoing direct-to-consumer genetic testing (DTCGT). The aims of this study were to examine the views, attitudes and decision-making factors of primary care patients regarding DTCGT. Their experience of and reactions to testing also emerged during the study. In this longitudinal, qualitative study, 20 primary care patients participated in DTCGT and individual interviews: (1) prior to testing after the informed consent session, (2) after receiving results, (3) 3 months post-test, and (4) 12 months post-test. Interviews included open-ended questions and all transcripts were analyzed using grounded theory, constant comparison methods. Five key themes emerged from data analysis as participants underwent DTCGT and reflected on their decision over time: (1) limited concerns about DTCGT, (2) motivations for testing, (3) expectations of testing, (4) understanding of results, and (5) impact of testing and results. While a few participants expressed concerns before testing, participants were motivated to test by curiosity, gaining actionable knowledge, and altruism. Most were uncertain of what to expect from DTCGT and needed assistance in understanding results. While many reported testing had no significant impact on them, being relieved or pleased after testing was the most common emotional effect. Notably, a few participants made positive health changes in response to testing. Given the paucity of information about primary care patients and DTCGT, this study adds more in-depth information to the emerging research on how such participants' view, make decisions about, experience and react to DTCGT over time. Because uncertainty remains about the accuracy of DTCGT, the response of primary care patients to this testing requires further investigation.

  15. Fabrication of 0.5-inch diameter FBR mixed oxide fuel pellets

    International Nuclear Information System (INIS)

    Rasmussen, D.E.; Benecke, M.W.; McCord, R.B.

    1979-01-01

    Large diameter (0.535 inch) mixed oxide fuel pellets for Fast Breeder Reactor application were successfully fabricated by the cold-press-and-sinter technique. Enriched UO 2 , PuO 2 -UO 2 , and PuO 2 -ThO 2 compositions were fabricated into nominally 90% theoretical density pellets for the UO 2 and PuO 2 -UO 2 compositions, and 88% and 93% T.D. for the PuO 2 -ThO 2 compositions. Some processing adjustments were required to achieve satisfactory pellet quality and density. Furnace heating rate was reduced from 200 to 50 0 C/h for the organic binder burnout cycle for the large, 0.535-inch diameter pellets to eliminate pellet cracking during sintering. Additional preslugging steps and die wall lubrication during pressing were used to eliminate pressing cracks in the PuO 2 -ThO 2 pellets

  16. Health physics challenges involved with opening a "seventeen-inch" concrete waste vault.

    Science.gov (United States)

    Sullivan, Patrick T; Pizzulli, Michelle

    2005-05-01

    This paper describes the various activities involved with opening a sealed legacy "Seventeen-inch" concrete vault and the health physics challenges and solutions employed. As part of a legacy waste stream that was removed from the former Hazardous Waste Management Facility at Brookhaven National Laboratory, the "Seventeen-inch" concrete vault labeled 1-95 was moved to the new Waste Management Facility for ultimate disposal. Because the vault contained 239Pu foils with a total activity in excess of the transuranic waste limits, the foils needed to be removed and repackaged for disposal. Conventional diamond wire saws could not be used because of facility constraints, so this project relied mainly on manual techniques. The planning and engineering controls put in place enabled personnel to open the vault and remove the waste while keeping dose as low as reasonably achievable.

  17. Schlesinger's Telescope: A Brief History of the Yale 26-inch Refractor

    Science.gov (United States)

    van Altena, W. F.; Hoffleit, E. D.

    2003-08-01

    Frank Schlesinger began planning for the establishment of a southern observatory when he arrived at Yale in 1920. After discussing the possibility of a location in Auckland, New Zealand and gathering site survey observations for a four-month period, he decided to select a site in Johannesburg, South Africa. A large photographically corrected 26-inch objective was ground, polished and completed by James McDowell in 1923, while the telescope was built largely in the Yale shops in New Haven. Schlesinger left New Haven in 1924 with the lens, and the telescope followed shortly thereafter. Installation of the 26-inch refractor was completed in early June and dedicated by the Prince of Wales on June 22, 1924. The principal observational program for the 26-inch refractor was the determination of parallaxes of the bright stars and it was continued until 1952, when the telescope was moved to Mt. Stromlo due to the deteriorating sky conditions in Johannesburg. The parallax program continued at Mt. Stromlo until 1963 when the telescope was donated to the Commonwealth Observatory and the Yale-Columbia project moved to Argentina, Columbia having joined with Yale in 1943. Approximately 70,000 plates were taken with the refractor for the parallax programs and about 2,000 stellar parallaxes determined. The Schlesinger 26-inch refractor was destroyed by a firestorm on January 18, 2003, along with the other telescopes on Mount Stromlo, the workshop, library and many of the residences. This event was a sad ending to a telescope that played a major role in defining our knowledge of the distances, motions and masses of the brighter stars during the first half of the 20th century.

  18. Design of a 18F production system at ORNL 86-inch cyclotron

    International Nuclear Information System (INIS)

    Shaeffer, M.C.; Barreto, F.; Datesh, J.R.; Goldstein, B.R.

    1977-01-01

    A target system for the production of 18 F by proton bombardment of H 2 18 O was designed for the ORNL 86-inch cyclotron facility. The system consists of concentric titanium and aluminum cylinders. Oxygen-18-enriched H 2 O circulates through the inner titanium cylinder and through an external heat exchanger with cooling water flowing in the annulus. Yields of 5.0 curies are expected for a 250-μA proton beam current and 24-min irradiation time

  19. Parametric Design Studies on a Direct Liquid Feed Fuel Cell

    Science.gov (United States)

    Frank, H. A.; Narayanan, S. R.; Nakamura, B.; Surampudi, S.; Halpert, G.

    1995-01-01

    Parametric design studies were carried out on a direct methanol liquid feed fuel cell employing 1 M MeOH fuel, air and oxygen as oxidant in a 2 inch x 2 inch cell employing polymeric electrolyte membranes. Measurements include voltage-current output parameters, methanol crossover rate, and impedance as a function of several design and operational variables. Design variables are described.

  20. The George C. Marshall Space Flight Center's 14 X 14-Inch Trisonic Wind Tunnel: A Historical Perspective

    Science.gov (United States)

    Springer, A.

    1994-01-01

    A history of the National Aeronautics and Space Administration (NASA) George C. Marshall Space Flight Center's (MSFC) 14 x 14-Inch Trisonic Wind Tunnel is presented. Its early and continuing role in the United States space program is shown through highlights of the tunnel's history and the major programs tested in the tunnel over the past 40 years. The 14-Inch Tunnel has its beginning with the Army in the late 1950's under the Army Ballistic Missile Agency (ABMA). Such programs as the Redstone, Jupiter, Pershing, and early Saturn were tested in the 14-Inch Tunnel in the late 1950's. America's first launch vehicle, the Jupiter C, was designed and developed using the 14-Inch Wind Tunnel. Under NASA, the 14-Inch Wind Tunnel has made large contributions to the Saturn, Space Transportation System, and future launch vehicle programs such as Shuttle-C and the National Launch System. A technical description of the tunnel is presented for background information on the type and capabilities of the 14-Inch Wind Tunnel. The report concludes in stating: the 14-Inch Wind Tunnel as in speed of sound; transonic, at or near the speed of sound the past, will continue to play a large but unseen role in he development of America's space program.

  1. Does Self-Directed and Web-Based Support for Parents Enhance the Effects of Viewing a Reality Television Series Based on the Triple P--Positive Parenting Programme?

    Science.gov (United States)

    Sanders, Matthew; Calam, Rachel; Durand, Marianne; Liversidge, Tom; Carmont, Sue Ann

    2008-01-01

    Background: This study investigated whether providing self-directed and web-based support for parents enhanced the effects of viewing a reality television series based on the Triple P--Positive Parenting Programme. Method: Parents with a child aged 2 to 9 (N=454) were randomly assigned to either a standard or enhanced intervention condition. In…

  2. Properties of 8-inch photomultiplier tubes for a large volume imaging water Cerenkov detector

    International Nuclear Information System (INIS)

    Oehler, Ch.

    1996-01-01

    In the Institut fuer Kernphysik I conceptional studies for a possible succession project for the KARMEN-ν-detector are performed. This design studies propose to build a large volume 1300 t imaging water Cerenkov detector. The main goal of this experiment will be the investigation of ν-e - -scattering in the medium energy range up to 50 MeV. The sensitive surface of this detector will be instrumented with about 3000 8-inch photomultiplier tubes (PMT) providing a coverage of 20%. In the framework of this detector design, studies of the properties of hemispherical 8-inch phototubes have been investigated in this work. The topic was to optimise the quality of the important PMT properties like time- and energy-resolution which are crucial to achieve the required spatial and angular resolutions. A second task of this work was to construct a test facility for the PMT, with the possibility to test large quantities. Monte Carlo calculations show that the required detector resolutions of σ E /E(E e ≤50 MeV)=5.2%+47%/√E, σ t (E e ∼30 MeV)=0.6 ns, σ x (E e ∼30 MeV)=13 cm, σ Θ (E e ∼30 MeV)=20 , can be achieved if the phototubes have a transit-time spread less than 1 ns. Up to now, two different 8-inch tubes are available and have been tested, the HAMAMATSU R5912 and the EMI 9353. (orig.)

  3. Photometric Typing Analyses of Three Young Supernovae with the Robotic Palomar 60-Inch Telescope

    OpenAIRE

    Rajala, Anne M.; Fox, Derek B.; Gal-Yam, Avishay; Leonard, Douglas C.; Soderberg, Alicia M.; Kulkarni, S. R.; Cenko, S. Bradley; Moon, Dae-Sik; Harrison, Fiona A.

    2004-01-01

    We present photometric typing analyses of three young supernovae observed with the Robotic 60-inch Telescope at Palomar Observatory (P60). This represents the first time that such photo-typing has been attempted, in a blind fashion, on newly-discovered supernovae. For one of the target supernovae, SN2004cs, our photometry provided the first constraint on the SN type, which we predicted would be type Ia. To the contrary, however, our subsequent Keck spectroscopy shows it to be an unusual type ...

  4. Nanomanipulation of 2 inch wafer fabrication of vertically aligned carbon nanotube arrays by nanoimprint lithography

    DEFF Research Database (Denmark)

    Bu, Ian Y. Y.; Eichhorn, Volkmar; Carlson, Kenneth

    2011-01-01

    Carbon nanotube (CNT) arrays are typically defined by electron beam lithography (EBL), and hence limited to small areas due to the low throughput. To obtain wafer‐scale fabrication we propose large area thermal nanoimprint lithography (NIL). A 2‐inch stamp master is defined using EBL for subsequent......, efficient production of wafer‐scale/larger arrays of CNTs has been achieved. The CNTs have been deposited by wafer‐scale plasma enhanced chemical vapour deposition (PECVD) of C2H2/NH3. Substrates containing such nanotubes have been used to automate nanorobotic manipulation sequences of individual CNTs...

  5. First thin AC-coupled silicon strip sensors on 8-inch wafers

    Energy Technology Data Exchange (ETDEWEB)

    Bergauer, T., E-mail: thomas.bergauer@oeaw.ac.at [Institute of High Energy Physics of the Austrian Academy of Sciences, Nikolsdorfer Gasse 18, 1050 Wien (Vienna) (Austria); Dragicevic, M.; König, A. [Institute of High Energy Physics of the Austrian Academy of Sciences, Nikolsdorfer Gasse 18, 1050 Wien (Vienna) (Austria); Hacker, J.; Bartl, U. [Infineon Technologies Austria AG, Siemensstrasse 2, 9500 Villach (Austria)

    2016-09-11

    The Institute of High Energy Physics (HEPHY) in Vienna and the semiconductor manufacturer Infineon Technologies Austria AG developed a production process for planar AC-coupled silicon strip sensors manufactured on 200 μm thick 8-inch p-type wafers. In late 2015, the first wafers were delivered featuring the world's largest AC-coupled silicon strip sensors. Detailed electrical measurements were carried out at HEPHY, where single strip and global parameters were measured. Mechanical studies were conducted and the long-term behavior was investigated using a climate chamber. Furthermore, the electrical properties of various test structures were investigated to validate the quality of the manufacturing process.

  6. Elemental Water Impact Test: Phase 2 36-Inch Aluminum Tank Head

    Science.gov (United States)

    Vassilakos, Gregory J.

    2014-01-01

    Spacecraft are being designed based on LS-DYNA simulations of water landing impacts. The Elemental Water Impact Test (EWIT) series was undertaken to assess the accuracy of LS-DYNA water impact simulations. EWIT Phase 2 featured a 36-inch aluminum tank head. The tank head was outfitted with one accelerometer, twelve pressure transducers, three string potentiometers, and four strain gages. The tank head was dropped from heights of 1 foot and 2 feet. The focus of this report is the correlation of analytical models against test data. As a measure of prediction accuracy, peak responses from the baseline LS-DYNA model were compared to peak responses from the tests.

  7. The 88-Inch Cyclotron: A One-Stop Facility for Electronics Radiation and Detector Testing

    Energy Technology Data Exchange (ETDEWEB)

    Kireeff Covo, M.; Albright, R. A.; Ninemire, B. F.; Johnson, M. B.; Hodgkinson, A.; Loew, T.; Benitez, J. Y.; Todd, D. S.; Xie, D. Z.; Perry, T.; Phair, L.; Bernsteiny, L. A.; Bevins, J.; Brown, J. A.; Goldblum, B. L.; Harasty, M.; Harrig, K. P.; Laplace, T. A.; Matthews, E. F.; Bushmaker, A.; Walker, D.; Oklejas, V.; Hopkins, A. R.; Bleuel, D. L.; Chen, J.; Cronin, S. B.

    2017-10-01

    In outer space down to the altitudes routinely flown by larger aircrafts, radiation can pose serious issues for microelectronics circuits. The 88-Inch Cyclotron at Lawrence Berkeley National Laboratory is a sector-focused cyclotron and home of the Berkeley Accelerator Space Effects Facility, where the effects of energetic particles on sensitive microelectronics are studied with the goal of designing electronic systems for the space community. This paper describes the flexibility of the facility and its capabilities for testing the bombardment of electronics by heavy ions, light ions, and neutrons. Experimental capabilities for the generation of neutron beams from deuteron breakups and radiation testing of carbon nanotube field effect transistor will be discussed.

  8. High-Volume Production of Lightweight, Multi-Junction Solar Cells Using 6-inch GaAs, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — In the proposed Phase II program, we will transition MicroLink's 6-inch epitaxial lift-off (ELO) solar cell fabrication process into a manufacturing platform capable...

  9. Stand Development 25 Years after a 9.0-inch Diameter-Limit First Cutting In Appalachian Hardwoods

    Science.gov (United States)

    H. Clay Smith; N. I. Lamson

    1977-01-01

    This report is a case history of stand development 25 years after a 9.0-inch diameter-limit cutting in a primarily second growth 40- to 45-year-old Appalachian hardwood stand. Some old residual trees from the early 1900 logging era were scattered throughout the stand. In 1950, a 9.0-inch diameter-limit cutting removed 8,650 board feet per acre and reduced the basal...

  10. Recommendations for protecting against failure by brittle fracture: Category II and III ferritic steel shipping containers with wall thickness greater than four inches

    International Nuclear Information System (INIS)

    Schwartz, M.W.; Fischer, L.E.

    1996-08-01

    This report provides criteria for selecting ferritic steels that would prevent brittle fracture in Category II and III shipping containers with wall thickness greater than 4 inches. These methods are extensions of those previously used for Category II and III containers less than 4 inches thick and Category I containers more than 4 inches thick

  11. A new alignment procedure for the South African Astronomical Observatory's 74-inch telescope

    Science.gov (United States)

    Crause, Lisa A.; Booth, John A.; Doss, David; Loubser, Egan; O'Connor, James E.; Sass, Craig; Sickafoose, Amanda A.; Worters, Hannah L.

    2016-07-01

    Considerable effort has gone into improving the performance and reliability of the SAAO's 74-inch telescope. This included replacing the telescope encoders, refining the pointing model and increasing the telescope throughput. The latter involved re-aluminising the primary and formulating a procedure to ensure optimal alignment of the telescope mirrors. To this end, we developed the necessary hardware and techniques to ensure that such alignment is achieved and maintained, particularly following re-aluminising of the mirrors. In essence, the procedure involves: placing a Taylor Hobson Alignment Telescope on the mechanical rotation axis of the 74-inch (which we define to be the optical axis, since the Cassegrain instruments attach to the associated turntable), then adjusting the tip/tilt of the secondary mirror to get it onto that axis and, lastly, adjusting the tip/tilt of the primary mirror to eliminate coma. An eyepiece (or wavefront camera) is installed at the Cassegrain port for this final step since comatic star images indicate the need to tip/tilt the primary mirror to align it to the secondary. Tuning out any brightness gradients seen in an out-of-focus image of a bright star may also be used for feedback when adjusting the tip/tilt of the primary mirror to null coma.

  12. A PROTOTYPE FOUR INCH SHORT HYDRIDE (FISH) BED AS A REPLACEMENT TRITIUM STORAGE BED

    Energy Technology Data Exchange (ETDEWEB)

    Klein, J.; Estochen, E.; Shanahan, K.; Heung, L.

    2011-02-23

    The Savannah River Site (SRS) tritium facilities have used 1st generation (Gen1) metal hydride storage bed assemblies with process vessels (PVs) fabricated from 3 inch nominal pipe size (NPS) pipe to hold up to 12.6 kg of LaNi{sub 4.25}Al{sub 0.75} metal hydride for tritium gas absorption, storage, and desorption for over 15 years. The 2nd generation (Gen2) of the bed design used the same NPS for the PV, but the added internal components produced a bed nominally 1.2 m long, and presented a significant challenge for heater cartridge replacement in a footprint limited glove-box. A prototype 3rd generation (Gen3) metal hydride storage bed has been designed and fabricated as a replacement candidate for the Gen2 storage bed. The prototype Gen3 bed uses a PV pipe diameter of 4 inch NPS so the bed length can be reduced below 0.7 m to facilitate heater cartridge replacement. For the Gen3 prototype bed, modeling results show increased absorption rates when using hydrides with lower absorption pressures. To improve absorption performance compared to the Gen2 beds, a LaNi{sub 4.15}Al{sub 0.85} material was procured and processed to obtain the desired pressure-composition-temperature (PCT) properties. Other bed design improvements are also presented.

  13. Artist autonomy in a digital era: The case of Nine Inch Nails

    Directory of Open Access Journals (Sweden)

    Steven C. Brown

    2012-09-01

    Full Text Available A 2009 presentation by Michael Masnick (CEO and founder of insight company Floor64 entitled ‘How Trent Reznor and Nine Inch Nails represent the Future of the Music Business’ brought the success of the business models employed by Reznor in distributing Nine Inch Nails’ music into the spotlight. The present review provides a comprehensive timeline of the band circa 2005-2010, evaluating the success of the distribution methods employed in accordance with Masnick’s (2009 proposed business model of connecting with fans and providing them with a reason to buy. The model is conceptualised in the wider context in which Reznor’s distribution methods take place (including a brief consideration of Radiohead’s much cited pay-what-you- want model, addressing the perceived gaps in the model by exploring the involvement of musical preferences; age and consumer purchasing behavior and fan worship. Implications are discussed concerning the applicability of the model for new and emerging bands.

  14. Separation Efficiency of Nagar Parker China Clay Using Two Inch Hydrocyclone

    Directory of Open Access Journals (Sweden)

    Abdul Ghani Pathan

    2013-01-01

    Full Text Available Performance efficiency of two inch hydrocyclone has been investigated, using the Nagar Parker china clay. Raw china clay was initially washed with tap water and -75 ?m size fraction was separated through wet sieving. Washed china clay of -75 ?m was used as feed sample in hydrocyclone tests. Solids concentration in slurry was kept as 2.5%. 45 tests were conducted with different combinations of pressure, vortex finder and spigot. Three sizes of spigot viz. 3.2, 2.2 and 1.5mm and three sizes of vortex finder viz. 7.00, 5.5 and 3.00mm were used. Hydrocyclone rig was operated at five different pressures viz. 20, 30, 40, 50 and 60 psi in conjunction with various combinations of vortex finder and spigot. Laser light scattering technique was used for particle size analysis of O/F (Overflow and U/F (Underflow products. Separation efficiency of the hydrocyclone, for various combinations of Vortex Finder, Spigot and operating pressure, was determined for two size fractions, i.e. less than ten micron and less than twenty micron, present in O/F and U/F products. From the results it was concluded that the best separation efficiency of 2 inch hydrocyclone is achieved by using the vortex finder of 7.0mm size and spigot of 1.5mm size. It was also concluded that the separation efficiency of the hydrocyclone decreases by increasing the pressure.

  15. FDG gamma camera PET equipped with one inch crystal and XCT. Assessment of myocardial viability

    Energy Technology Data Exchange (ETDEWEB)

    Beheshti, M. [Dept. of Nuclear Medicine, Medical Univ., General Hospital of Vienna (Austria); Dept. of Nuclear Medicine and Endocrinology, PET CT Centre, St. Vincent' s Hospital, Linz (Austria); Khorsand, A.; Graf, S. [Dept. of Cardiology, Medical Univ., General Hospital of Vienna (Austria); Dobrozemsky, G. [Dept. of Nuclear Medicine, Medical Univ. of Innsbruck (Austria); Oezer, S.; Kletter, K.; Dudczak, R. [Dept. of Nuclear Medicine, Medical Univ., General Hospital of Vienna (Austria); Pirich, C. [Dept. of Nuclear Medicine und Endocrinology, Paracelsus Private Medical Univ., SALK, Salzburg (Austria)

    2006-07-01

    Metabolic imaging with 2-[fluorine-18]-fluoro-2-deoxy-D-glucose (FDG) is actually considered as the best method to detect and quantitatively assess myocordial tissue viability. The aim of this study was to investigate the accuracy of FDG gamma camera positron emission tomography (GCPET) imaging equipped with one inch NaI crystals in comparison to FDG dedicated PET (dPET) imaging as a ''gold standard'' in phantom and clinical studies. Patients, methods: nineteen patients with coronary artery disease (CAD) underwent both imaging modalities. Phantom and clinical GCPET imaging were performed with a dual-headed, coincidence based gamma camera equipped with 1 inch thick NaI crystals and an X-ray tube (XCT) for attenuation correction (AC), as well as with a dedicated PET scanner with AC. {sup 99m}Tc tetrofosmin single-photon emission tomography (SPET) studies were performed for assessment of myocardial perfusion, with AC. Results: phantom studies showed a significant relation in segmental activity between FDG imaging with AC using GCPET and dPET (r = 0.91, p < 0.001). In clinical studies with AC correlation coefficients of mean segmental FDG uptake and regional defect size were r = 0.87 (p < 0.0001) and r = 0.83 (p < 0.0001), respectively. In regional analysis close agreement was even found in the most attenuated regions of the heart if AC was used in GCPET imaging. The overall agreement for detection of viable myocardium was 81% between FDG-dPET (AC) and FDG-GCPET (AC) and 74% between FDG-dPET (AC) and FDG-GCPET (NC). Conclusions: suggests that the assessment of myocardial metabolism by means of FDG is feasible with a coincidence based gamma camera equipped with 1 inch thick NaI crystal if AC is performed. The results reveal a close concordance and agreement between FDG-dPET (AC) and FDG-GCPET (AC) as compared to FDG-GCPET (NC). (orig.)

  16. MODELING OF PATTERN FORMING PROCESS OF AUTOMATIC RADIO DIRECTION FINDER OF PHASE VHF IN THE DEVELOPMENT ENVIRONMENT OF LabVIEW APPLIED PROGRAMS

    Directory of Open Access Journals (Sweden)

    G. K. Aslanov

    2015-01-01

    Full Text Available In the article is developed the model demonstrating the forming process of pattern of antenna system of aerodrome quasidopler automatic radiodirection-finder station in the development environment of LabVIEW applied programs of National Instrument company. 

  17. View of the plaque to be left on the moon by the Apollo 17 astronauts

    Science.gov (United States)

    1972-01-01

    View of the plaque to be left at the Taurus-Littrow lunar landing site by the Apollo 17 astronauts. The commemorative plaque is made of stainless steel measuring nine by seven by five-eighths inches and one-sixteenth inch thick. It is attached to the ladder on the landing gear strut on the descent stage of the Apollo 17 Lunar Module 'Challenger'.

  18. Double-Ended Break Test of an 8.5 inch Direct Vessel Injection Line using the ATLAS

    International Nuclear Information System (INIS)

    Choi, Ki Yong; Kang, Kyoung Ho; Kim, Bok Deuk; Kim, Yeon Sik; Min, Kyoung Ho; Park, Choon Kyoung; Park, Hyun Sik; Baek, Won Pil; Cho, Seok; Choi, Nam Hyun

    2010-01-01

    A thermal-hydraulic integral effect test facility, ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation), has been constructed at the Korea Atomic Energy Research Institute (KAERI). It is a 1/2 reduced height and 1/288-volume scaled test facility with respect to the APR1400, an evolutionary pressurized water reactor developed by the Korean industry. In 2008, an integral effect test for simulating a guillotine break of a DVI line of the APR1400 was carried out as the first DVI test item, named as SB-DVI-03, on May, 2008. With an improvement on the break flow measuring system, the second DVI test for a guillotine break of a DVI line of the APR1400, named as SB-DVI-08, was conducted for repeatability. The present data is the first integral effect test data of its kind for simulating a DVI line break accident. It will help in understanding the thermal hydraulic phenomena occurring during the DVI line break accident. A post-test calculation was performed with a best-estimate safety analysis code MARS 3.1 to examine its prediction capability and to identify any code deficiencies for the thermal hydraulic phenomena occurring during the DVI line break accidents. The present integral effect test data will be used to validate the current safety analysis methodology for the DVI line break accident

  19. Japanese views on ASSET

    International Nuclear Information System (INIS)

    Hirano, M.

    1997-01-01

    The presentation briefly reviews the following aspects directed to ensuring NPP safety: Japanese participation in ASSET activities; views to ASSET activities; recent operating experience in Japan; future ASSET activities

  20. Testing of one-inch UF{sub 6} cylinder valves under simulated fire conditions

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, P.G. [Martin Marietta Energy Systems, Inc., Paducah, KY (United States)

    1991-12-31

    Accurate computational models which predict the behavior of UF{sub 6} cylinders exposed to fires are required to validate existing firefighting and emergency response procedures. Since the cylinder valve is a factor in the containment provided by the UF{sub 6} cylinder, its behavior under fire conditions has been a necessary assumption in the development of such models. Consequently, test data is needed to substantiate these assumptions. Several studies cited in this document provide data related to the behavior of a 1-inch UF{sub 6} cylinder valve in fire situations. To acquire additional data, a series of tests were conducted at the Paducah Gaseous Diffusion Plant (PGDP) under a unique set of test conditions. This document describes this testing and the resulting data.

  1. Recent developments in high charge state heavy ion beams at the LBL 88-inch Cyclotron

    International Nuclear Information System (INIS)

    Gough, R.A.; Clark, D.J.; Glasgow, L.R.

    1978-01-01

    Recent advances in design and operation of the internal PIG sources at the LBL 88-Inch Cyclotron have led to the development of high charge state (0.4 16 O 8+ . Total external intensities of these beams range from 10 12 particles/s for 6 Li 3+ to 0.1 particles/s for 16 O 8+ . Techniques have been developed for routine tune-out of the low intensity beams. These include use of model beams and reliance on the large systematic data base of cyclotron parameters which has been developed over many years of operation. Techniques for delivery of these weak beams to the experimental target areas are presented. Source design and operation, including special problems associated with Li, Be, and B beams are discussed

  2. LOFT transient thermal analysis for 10 inch primary coolant blowdown piping weld

    International Nuclear Information System (INIS)

    Howell, S.K.

    1978-01-01

    A flaw in a weld in the 10 inch primary coolant blowdown piping was discovered by LOFT personnel. As a result of this, a thermal analysis and fracture mechanics analysis was requested by LOFT personnel. The weld and pipe section were analyzed for a complete thermal cycle, heatup and Loss of Coolant Experiment (LOCE), using COUPLE/MOD2, a two-dimensional finite element heat conduction code. The finite element representation used in this analysis was generated by the Applied Mechanics Branch. The record of nodal temperatures for the entire transient was written on tape VSN=T9N054, and has been forwarded to the Applied Mechanics Branch for use in their mechanical analysis. Specific details and assumptions used in this analysis are found in appropriate sections of this report

  3. Does self-directed and web-based support for parents enhance the effects of viewing a reality television series based on the Triple P-Positive Parenting Programme?

    Science.gov (United States)

    Sanders, Matthew; Calam, Rachel; Durand, Marianne; Liversidge, Tom; Carmont, Sue Ann

    2008-09-01

    This study investigated whether providing self-directed and web-based support for parents enhanced the effects of viewing a reality television series based on the Triple P - Positive Parenting Programme. Parents with a child aged 2 to 9 (N = 454) were randomly assigned to either a standard or enhanced intervention condition. In the standard television alone viewing condition, parents watched the six-episode weekly television series, 'Driving Mum and Dad Mad'. Parents in the enhanced television viewing condition received a self-help workbook, extra web support involving downloadable parenting tip sheets, audio and video streaming of positive parenting messages and email support, in addition to viewing the television series. Parents in both conditions reported significant improvements in their child's disruptive behaviour and improvements in dysfunctional parenting practices. Effects were greater for the enhanced condition as seen on the ECBI, two of the three parenting indicators and overall programme satisfaction. However, no significant differences were seen on other measures, including parent affect indicators. The level of improvement was related to number of episodes watched, with greatest changes occurring in families who watched each episode. Improvements achieved at post-intervention by parents in both groups were maintained at six-month follow-up. Online tip sheets were frequently accessed; uptake of web-based resources was highest early in the series. The value of combining self-help approaches, technology and media as part of a comprehensive public health approach to providing parenting support is discussed.

  4. View relations

    DEFF Research Database (Denmark)

    Knudsen, Søren; Carpendale, Sheelagh

    2016-01-01

    In this paper, we explore the potential of using visual representations to support people in managing, organizing, and understanding relations between multiple visualization views. Multiple views can help people understand different facets of data and data processing, and are a crucial part of data...... analysis particularly when it is done collaboratively. Both the growing use of multiple views and the increasing display sizes have amplified the need to explore how to better help people to understand the relations between many views. To improve our understanding of how to visualize view relations, we...... invited visualization and interaction designers to critique and sketch representations of view relations. The participants provided design critiques, and sketched their own relation representations. Our findings expand the range and palette of ways of visually linking visualization views and suggest new...

  5. Directive versus Facilitative Peer Tutoring? A View on Students' Appraisal, Reported Learning Gains and Experiences within Two Differently-Tutored Learning Environments

    Science.gov (United States)

    Berghmans, Inneke; Michiels, Lotte; Salmon, Sara; Dochy, Filip; Struyven, Katrien

    2014-01-01

    The present study aimed to shed light on students' appraisal and reported learning gains in two differently-tutored learning environments (i.e. directively and facilitatively tutored). In order to investigate this, a quasi-experimental study was set up in the context of a clinical skills learning environment. Not only were participating…

  6. The Berkeley accelerator space effects facility (BASE) - A newmission for the 88-inch cyclotron at LBNL

    Energy Technology Data Exchange (ETDEWEB)

    McMahan, M.A.

    2005-09-06

    In FY04, the 88-Inch Cyclotron began a new operating mode that supports a local research program in nuclear science, R&D in accelerator technology and a test facility for the National Security Space (NSS) community (the U.S. Air Force and NRO). The NSS community (and others on a cost recovery basis) can take advantage of both the light- and heavy-ion capabilities of the Cyclotron to simulate the space radiation environment. A significant portion of this work involves the testing of microcircuits for single event effects. The experimental areas within the building that are used for the radiation effects testing are now called the Berkeley Accelerator and Space Effects (BASE) facility. Improvements to the facility to provide increased reliability, quality assurance and new capabilities are underway and will be discussed. These include a 16 AMeV ''cocktail'' of beams for heavy ion testing, a neutron beam, more robust dosimetry, and other upgrades.

  7. Design evaluation of the 20-cm (8-inch) secondary burner system

    Energy Technology Data Exchange (ETDEWEB)

    Rode, J.S.

    1977-08-01

    This report describes an evaluation of the design of the existing 20-cm (8-inch) engineering-scale secondary burner system in the HTGR reprocessing cold pilot plant at General Atomic Co. The purpose of this evaluation is to assess the suitability of the existing design as a prototype of the HTGR Recycle Demonstration Facility (HRDF) secondary burner system and to recommend alternatives where the existing design is thought to be unsuitable as a prototype. This evaluation has led to recommendations for the parallel development of two integrated design concepts for a prototype secondary burner system. One concept utilizes the existing burner heating and cooling subsystems in order to minimize development risk, but simplifies a number of other features associated with remote maintenance and burner operation. The other concept, which offers maximum cost reduction, utilizes internal gas cooling of the burner, retains the existing heating subsystem for design compatibility, but requires considerable development to reduce the risk to acceptable limits. These concepts, as well as other design alternatives, are described and evaluated.

  8. Performance and Flowfield Measurements on a 10-inch Ducted Rotor VTOL UAV

    Science.gov (United States)

    Martin, Preston; Tung, Chee

    2004-01-01

    A ducted fan VTOL UAV with a 10-inch diameter rotor was tested in the US Army 7-by 10-Foot Wind Tunnel. The test conditions covered a range of angle of attack from 0 to 110 degrees to the freestream. The tunnel velocity was varied from 0 (simulating a hover condition) to 128 ft/sec in propeller mode. A six-component internal balance measured the aerodynamic loads for a range of model configurations. including the isolated rotor, the isolated duct, and the full configuration of the duct and rotor. For some conditions, hotwire velocity surveys were conducted along the inner and outer surface of the duct and across the downstream wake. In addition, fluorescent oil flow visualization allowed the flow separation patterns inside and outside of the duct to be mapped for a few test conditions. Two different duct shapes were tested to determine the performance effects of leading edge radius. For each duct, a range of rotor tip gap from 1%R to 4.5%R was tested to determine the performance penalty in hover and axial flight. Measured results are presented in terms of hover performance, hover performance in a crosswind, and high angle of attack performance in propeller mode. In each case, the effects of both tip gap and duct leading edge radius are illustrated using measurements. Some of the hover performance issues were also studied using a simple analytical method, and the results agreed with the measurements.

  9. Experimental performance of an internal resistance heater for Langley 6-inch expansion tube driver

    Science.gov (United States)

    Creel, T. R., Jr.

    1972-01-01

    An experimental investigation of the heating characteristics of an internal resistance heating element was conducted in the driver of the Langley 6-inch expansion tube to obtain actual operating conditions, to compare these results to theory, and to determine whether any modification need be made to the heater element. The heater was operated in pressurized helium from 138. MN/sq m to 62.1 MN/sq m. This investigation revealed large temperature variations within the heater element caused primarily by area reductions at insulator locations. These large temperature variations were reduced by welding small tabs over all grooves. Previous predictions of heater element and driver gas temperature were unacceptable so new equations were derived. These equations predict element and gas temperature within 10 percent of the test data when either the constant power cycle or the interrupted power cycle is used. Visual observation of the heater element, when exposed to the atmosphere with power on, resulted in a decision to limit the heater element to 815 K. Experimental shock Mach numbers are in good agreement with theory.

  10. Summary of LaRC 2-inch Erectable Joint Hardware Heritage Test Data

    Science.gov (United States)

    Dorsey, John T.; Watson, Judith J.

    2016-01-01

    As the National Space Transportation System (STS, also known as the Space Shuttle) went into service during the early 1980's, NASA envisioned many missions of exploration and discovery that could take advantage of the STS capabilities. These missions included: large orbiting space stations, large space science telescopes and large spacecraft for manned missions to the Moon and Mars. The missions required structures that were significantly larger than the payload volume available on the STS. NASA Langley Research Center (LaRC) conducted studies to design and develop the technology needed to assemble the large space structures in orbit. LaRC focused on technology for erectable truss structures, in particular, the joint that connects the truss struts at the truss nodes. When the NASA research in large erectable space structures ended in the early 1990's, a significant amount of structural testing had been performed on the LaRC 2-inch erectable joint that was never published. An extensive set of historical information and data has been reviewed and the joint structural testing results from this historical data are compiled and summarized in this report.

  11. Design evaluation of the 20-cm (8-inch) secondary burner system

    International Nuclear Information System (INIS)

    Rode, J.S.

    1977-08-01

    This report describes an evaluation of the design of the existing 20-cm (8-inch) engineering-scale secondary burner system in the HTGR reprocessing cold pilot plant at General Atomic Co. The purpose of this evaluation is to assess the suitability of the existing design as a prototype of the HTGR Recycle Demonstration Facility (HRDF) secondary burner system and to recommend alternatives where the existing design is thought to be unsuitable as a prototype. This evaluation has led to recommendations for the parallel development of two integrated design concepts for a prototype secondary burner system. One concept utilizes the existing burner heating and cooling subsystems in order to minimize development risk, but simplifies a number of other features associated with remote maintenance and burner operation. The other concept, which offers maximum cost reduction, utilizes internal gas cooling of the burner, retains the existing heating subsystem for design compatibility, but requires considerable development to reduce the risk to acceptable limits. These concepts, as well as other design alternatives, are described and evaluated

  12. Development of the Software for 30 inch Telescope Control System at KHAO

    Science.gov (United States)

    Mun, B.-S.; Kim, S.-J.; Jang, M.; Min, S.-W.; Seol, K.-H.; Moon, K.-S.

    2006-12-01

    Even though 30inch optical telescope at Kyung Hee Astronomy Observatory has been used to produce a series of scientific achievements since its first light in 1992, numerous difficulties in the operation of the telescope have hindered the precise observations needed for further researches. Since the currently used PC-TCS (Personal Computer based Telescope Control system) software based on ISA-bus type is outdated, it doesn't have a user friendly interface and make it impossible to scale. Also accumulated errors which are generated by discordance from input and output signals into a motion controller required new control system. Thus we have improved the telescope control system by updating software and modifying mechanical parts. We applied a new BLDC (brushless DC) servo motor system to the mechanical parts of the telescope and developed a control software using Visual Basic 6.0. As a result, we could achieve a high accuracy in controlling of the telescope and use the userfriendly GUI (Graphic User Interface).

  13. Usefulness of Ultrasound View of Larynx in Pre-Anesthetic Airway Assessment: A Comparison With Cormack-Lehane Classification During Direct Laryngoscopy

    OpenAIRE

    Soltani Mohammadi, Sussan; Saliminia, Alireza; Nejatifard, Nasim; Azma, Roxana

    2016-01-01

    Background One of the main challenges in anesthesiology is difficult intubation. There are many anatomical parameters for evaluating the feasibility of tracheal intubation; one that can reliably predict a difficult intubation is the Cormack-Lehane classification obtained during direct laryngoscopy. This is an invasive procedure that cannot be performed in an awake patient or for pre-anesthetic airway assessments in patients with no prior history of tracheal intubation. Recently, ultrasound ha...

  14. The unstoppable versus the immovable - a personal view of the future facing gasoline direct injection in the face of Euro IV

    Energy Technology Data Exchange (ETDEWEB)

    Shillington, S.A.C. [University of Warwick (United Kingdom). Rover Group Ltd.

    1998-09-01

    EURO IV, when compared with the starting point in 1971, will represent close to a 99% reduction in exhaust emissions. Achieving this will require hitherto undreamt of levels of emission control. Substantial reductions in CO{sub 2} will also be required in the same timescale. The industry`s response to the need for CO{sub 2} reduction has been to develop the gasoline direct injection concept. GDI has the potential to ape the diesel engine by allowing part load operation without inlet throttling. GDI does however bring problems, among them, like the diesel, the control of smoke and NOx. (author)

  15. Multifield direct design method for ultrashort throw ratio projection optics with two tailored mirrors.

    Science.gov (United States)

    Nie, Yunfeng; Mohedano, Rubén; Benítez, Pablo; Chaves, Julio; Miñano, Juan C; Thienpont, Hugo; Duerr, Fabian

    2016-05-10

    In this work, we present a multifield direct design method for ultrashort throw ratio projection optics. The multifield design method allows us to directly calculate two freeform mirror profiles, which are fitted by odd polynomials and imported into an optical design program as an excellent starting point. Afterward, these two mirrors are represented by XY polynomial freeform surfaces for further optimization. The final configuration consists of an off-the-shelf projection lens and two XY polynomial freeform mirrors to greatly shorten the regular projection distance from 2 m to 48 cm for a 78.3 inch diagonal screen. The values of the modulation transfer function for the optimized freeform mirror system are improved to over 0.6 at 0.5 lp/mm, in comparison with its rotationally symmetric counterpart's 0.43, and the final distortion is less than 1.5%, showing a very good and well-tailored imaging performance over the entire field of view.

  16. Computational fluid dynamics analysis of space shuttle main propulsion feed line 17-inch disconnect valves

    Science.gov (United States)

    Kandula, Max; Pearce, Daniel

    1989-01-01

    A steady incompressible three-dimensional (3-D) viscous flow analysis was conducted for the Space Shuttle Main Propulsion External Tank (ET)/Orbiter (ORB) propellant feed line quick separable 17-inch disconnect flapper valves for liquid oxygen (LO2) and liquid hydrogen (LH2). The main objectives of the analysis were to predict and correlate the hydrodynamic stability of the flappers and pressure drop with available water test data. Computational Fluid Dynamics (CFD) computer codes were procured at no cost from the public domain, and were modified and extended to carry out the disconnect flow analysis. The grid generator codes SVTGD3D and INGRID were obtained. NASA Ames Research Center supplied the flow solution code INS3D, and the color graphics code PLOT3D. A driver routine was developed to automate the grid generation process. Components such as pipes, elbows, and flappers can be generated with simple commands, and flapper angles can be varied easily. The flow solver INS3D code was modified to treat interior flappers, and other interfacing routines were developed, which include a turbulence model, a force/moment routine, a time-step routine, and initial and boundary conditions. In particular, an under-relaxation scheme was implemented to enhance the solution stability. Major physical assumptions and simplifications made in the analysis include the neglect of linkages, slightly reduced flapper diameter, and smooth solid surfaces. A grid size of 54 x 21 x 25 was employed for both the LO2 and LH2 units. Mixing length theory applied to turbulent shear flow in pipes formed the basis for the simple turbulence model. Results of the analysis are presented for LO2 and LH2 disconnects.

  17. Nuclear supervision - Administration by the federal states on behalf of the Federal Government or direct federal administration? Evaluation from a practical point of view

    International Nuclear Information System (INIS)

    Cloosters, W.

    2005-01-01

    The organization of supervisory authorities under the Atomic Energy Act is not a new issue. In fact, it was discussed vehemently in the Federal Republic of Germany as far back as in the early fifties. Federal legislation in late 1959 decided to have the Atomic Energy Act executed in part under direct federal responsibility and, as far as the important supervision of the nuclear power plants operated in the Federal Republic of Germany was concerned, by the federal states on behalf of the federal government. Federal Minister for the Environment Trittin reopened the debate about the organization of nuclear administration by announcing his intention to transfer the supervision of nuclear power plants to direct federal administration. This announcement not only raises the question of legal permissibility of transferring nuclear power plant oversight to federal administration, but also requires a critical review, as presented in this article, of practical regulatory supervision to ensure safe operation of nuclear facilities. In this connection, both the actual content of supervisory activities and the way in which they are carried out must be examined in an effort to find an answer based on solid premises to the question raised above. For reasons explained in the contribution, oversight of nuclear power plants cannot be carried out as a centralized function. Instead, the legislative decision of 1959 in favor of the federal states exercising supervision on behalf of the federal government continues to be correct at the present stage also in the light of the steps initiated to opt out of the peaceful uses of nuclear power. (orig.)

  18. Is prevention a fantasy, or the future of medicine? A panoramic view of recent data, status, and direction in cardiovascular prevention.

    Science.gov (United States)

    Kones, Richard

    2011-02-01

    Americans are under assault by a fierce epidemic of obesity, diabetes, and cardiovascular disease, of their own doing. Lowered death rates from heart disease and reduced rates of smoking are seriously threatened by the inexorable rise in overweight and obesity. Latest data indicate that 32% of children are overweight or obese, and fewer than 17% exercise sufficiently. Over 68% of adults are overweight, 35% are obese, nearly 40% fulfill criteria for the metabolic syndrome, 8-13% have diabetes, 34% have hypertension, 36% have prehypertension, 29% have prediabetes, 15% of the population with either diabetes, hypertension, or dyslipidemia are undiagnosed, 59% engage in no vigorous activity, and fewer than 5% of the US population qualifies for the American Heart Association (AHA) definition of ideal cardiovascular health. Health, nutrition, and exercise illiteracy is prevalent, while misinformation and unrealistic expectations are the norm. Half of American adults have at least one cardiovascular risk factor. Up to 65% do not have their conventional risk biomarkers under control. Of those patients with multiple risk factors, fewer than 10% have all of them adequately controlled. Even when patients are treated according to evidence-based protocols, about 70% of cardiac events remain unaddressed. Undertreatment is also common. Poor patient adherence, probably well below 50%, adds further difficulty in reducing cardiovascular risk. Available data indicate that only a modest fraction of the total cardiovascular risk burden in the population is actually now being eliminated. A fresh view of these issues, a change in current philosophy, leading to new and different, multimechanistic methods of prevention may be needed. Adherence to published guidelines will improve substantially outcomes in both primary and secondary prevention. Primordial prevention, which does not allow risk values to appear in a population, affords more complete protection than subsequent partial reversal

  19. Designing Direct Observation of Procedural Skills (DOPS Test for Selective Skills of Orthopedic Residents and Evaluating Its Effects from Their Points of View

    Directory of Open Access Journals (Sweden)

    Abolghasem Amini

    2015-12-01

    Full Text Available Introduction: Direct Observation of Procedural Skills (DOPS is a valuable method to evaluate procedural skills. The aim of this study was to develop a DOPS test for assessment of first- and second-year orthopedic residents and evaluate its effects on their learning. Methods: Seven residents and nine faculty members of the orthopedic department of Tabriz University of Medical Sciences participated in this study. A questionnaire containing twelve closed and four open questions was used for assessment. The acquired data were analyzed by descriptive statistics (frequency, percent, mean and standard deviation. Results: The results showed that residents’ performances were almost good (mean of good performances = 50.6%, the participants’ performances increased in the second stage (from 50.6% to 59.4% but this increasing performance decreased in the third stage (from 59.4% to 39%. Most faculty members and residents believed that DOPS tests can have an effective role in facilitating students’ learning and also can help them to succeed in their final test. Some of the residents believed that DOPS tests decrease their stress in the final exam. Promoting students’ procedural skills and independent learning are the pros and a stressful test experience is the con of this study. Conclusion: According to results of this study, DOPS tests had an effective role in facilitating students’ learning and skills. Test repetition for the second time is sufficient and useful for evaluating residents’ clinical and instrumental skills.

  20. MLEP-Fail calibration for 1/8 inch thick cast plate of 17-4 steel.

    Energy Technology Data Exchange (ETDEWEB)

    Corona, Edmundo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-02-01

    The purpose of the work presented in this memo was to calibrate the Sierra material model Multilinear Elastic-Plastic Hardening Model with Failure (MLEP-Fail) for 1/8 inch thick cast plate of 17-4 steel. The calibration approach is essentially the same as that recently used in a previous memo using data from smooth and notched tensile specimens. The notched specimens were manufactured with three notch radii R = 1=8, 1/32 and 1/64 inches. The dimensions of the smooth and notched specimens are given in the prints in Appendix A. Two cast plates, Plate 3 and Plate 4, with nominally identical properties were considered.

  1. Diabetic retinopathy screening: can the viewing monitor influence the reading and grading outcomes.

    Science.gov (United States)

    Ting, D S W; Tay-Kearney, M L; Vignarajan, J; Kanagasingam, Y

    2012-12-01

    To evaluate the accuracy of different viewing monitors for image reading and grading of diabetic retinopathy (DR). Single-centre, experimental case series-evaluation of reading devices for DR screening. A total of 100 sets of three-field (optic disc, macula, and temporal views) colour retinal still images (50 normal and 50 with DR) captured by FF 450 plus (Carl Zeiss) were interpreted on 27-inch iMac, 15-inch MacBook Pro, and 9.7-inch iPad. All images were interpreted by a retinal specialist and a medical officer. We calculated the sensitivity and specificity of 15-inch MacBook Pro and 9.7-inch iPad in detection of DR signs and grades with reference to the reading outcomes obtained using a 27-inch iMac reading monitor. In detection of any grade of DR, the 15-inch MacBook Pro had sensitivity and specificity of 96% (95% confidence interval (CI): 85.1-99.3) and 96% (95% CI: 85.1-99.3), respectively, for retinal specialist and 91.5% (95% CI: 78.7-97.2) and 94.3% (95% CI: 83.3-98.5), respectively, for medical officer, whereas for 9.7-inch iPad, they were 91.8% (95% CI: 79.5-97.4) and 94.1% (95% CI: 82.8-98.5), respectively, for retinal specialist and 91.3% (95% CI: 78.3-97.1) and 92.6% (95% CI: 81.3-97.6), respectively, for medical officer. The 15-inch MacBook Pro and 9.7-inch iPad had excellent sensitivity and specificity in detecting DR and hence, both screen sizes can be utilized to effectively interpret colour retinal still images for DR remotely in a routine, mobile or tele-ophthalmology setting. Future studies could explore the use of more economical devices with smaller viewing resolutions to reduce cost implementation of DR screening services.

  2. Ductile fracture behavior of 6-inch diameter type 304 stainless steel and STS 42 carbon steel piping containing a through-wall or part-through crack

    International Nuclear Information System (INIS)

    Shibata, Katsuyuki; Ohba, Toshihiro; Kawamura, Takaichi; Miyazono, Shohachiro; Kaneko, Tadashi; Yokoyama, Norio.

    1986-05-01

    The double ended guillotine break philosophy in the design base accident of the nuclear power plant is considered to be overly conservative from the view point of piping design. Through the past experiences and developments of the fabrication, inspection, and operation of nuclear power plants, it has been recognized that the Leak-Before-Break (LBB) concept can be justified in the LWR pressure boundary pipings. In order to verify the LBB concept, extensive experimental and theoretical works are being conducted in many countries. Furthermore, a revised piping design standard, in which LBB concept is introduced, is under preparation in Japan, U.S.A., and European countries. At JAERI, a research program to investigate the unstable ductile fracture behavior of LWR piping under bending load has been carried out as a part of the LBB verification researches since 1983. This report summarizes the result of the ductile fracture tests conducted at room temperature in 1983 and 84. The 6-inch diameter pipes of type 304 stainless steel and STS 42 carbon steel pipe with a through-wall or part-through crack were tested under bending load with low or high compliance condition at room temperature. Pipe fracture data were obtained from the test as regards to load- displacement curve, crack extension, net section stress, J-resistance curve, and so on. Besides, the influence of the compliance on the fracture behavior was examined. Discussions are performed on the ductile pipe fracture criterion, flaw evaluation criterion, and LBB evaluation method. (author)

  3. Optimizing Facility Configurations and Operating Conditions for Improved Performance in the NASA Ames 24 Inch Shock Tube

    Science.gov (United States)

    Bogdanoff, David W.; Cruden, Brett A.

    2016-01-01

    The Ames Electric Arc Shock Tube (EAST) is a shock tube wherein the driver gas can be heated by an electric arc discharge. The electrical energy is stored in a 1.2 MJ capacitor bank. Four inch and 24 inch diameter driven tubes are available. The facility is described and the need for testing in the 24 inch tube to better simulate low density NASA mission profiles is discussed. Three test entries, 53, 53B and 59, are discussed. Tests are done with air or Mars gas (95.7% CO2/2.7% N2/1.6% Ar) at pressures of 0.01 to 0.14 Torr. Velocities spanned 6.3-9.2 km/s, with a nominal center of 7 km/s. Many facility configurations are studied in an effort to improve data quality. Various driver and driven tube configurations and the use of a buffer section between the driver and the driven tube are studied. Diagnostics include test times, time histories of the shock light pulses and tilts of the shock wave off the plane normal to the tube axis. The report will detail the results of the various trials, give the best configuration/operating conditions found to date and provide recommendations for further improvements. Finally, diaphragm performance is discussed.

  4. Zograscopic viewing

    NARCIS (Netherlands)

    Koenderink, J.; Wijntjes, M.; Van Doorn, A.

    2013-01-01

    The “zograscope” is a “visual aid” (commonly known as “optical machine” in the 18th century) invented in the mid-18th century, and in general use until the early 20th century. It was intended to view single pictures (thus not stereographic pairs) with both eyes. The optics approximately eliminates

  5. Panorama completion for street views

    OpenAIRE

    Zhu, Zhe; Martin, Ralph Robert; Hu, Shi-Min

    2015-01-01

    This paper considers panorama images used for street views. Their viewing angle of 360° causes pixels at the top and bottom to appear stretched and warped. Although current image completion algorithms work well, they cannot be directly used in the presence of such distortions found in panoramas of street views. We thus propose a novel approach to complete such 360° panoramas using optimization-based projection to deal with distortions. Experimental results show that our approach is efficient ...

  6. Does laryngoscopic view after intubation predict laryngoscopic view before intubation?

    Science.gov (United States)

    Foglia, Julena; Archer, David; Pytka, Saul; Baghirzada, Leyla; Duttchen, Kaylene

    2016-09-01

    To determine if an endotracheal (ET) tube will distort the laryngeal view obtained with direct laryngoscopy measuring with the modified Cormack-Lehane scale (MCL). Observational single-arm study. The University of Calgary teaching hospitals. Patients between 18 and 86 years of age undergoing elective surgical procedures. A total of 173 patients were enrolled and analyzed. Direct laryngoscopy view obtained before ET intubation and directly after intubation. The MCL scales were described for each view obtained and compared to each other with each patient serving as their own control. The primary objective was a change in the best obtainable view by direct laryngoscopy from an acceptable view (MCLS 1 or 2a) to an unacceptable view (MCLS 2b, 3, or 4) or changing from an unacceptable view (MCLS 2b, 3, or 4) to an acceptable view (MCLS 1 or 2a). The main finding of this study was that the ET tube altered the MCL in 58 (33%) of 173 patients, "worsening" the grade in 30 patients (17.34%) and "improving" the grade in 28 patients (16.18%). We performed a prospective observational study to address the predictive value of postintubation laryngoscopy grade in adults. The presence of the ET tube both increased visualization of the glottis and worsened the view in different subjects. The important outcome was that the presence of the ET tube did in fact change the view obtained of the larynx during direct laryngoscopy. In conclusion, postintubation MCL grades may not be reliable to predict laryngeal grade and should be used with caution in the right clinical context. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Low-Cost, Manufacturable, 6-Inch Wafer Bonding Process for Next-Generation 5-Junction IMM+Ge Photovoltaic Devices Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose the development of a 6-inch wafer bonding process to allow bonding of a multi-junction inverted metamorphic (IMM) tandem solar cell structure to an...

  8. MRIR/Nimbus-2 Images of Daytime Brightness Temperature on 4 x 5 inch Film Sheets V001 (MRIRN2IM) at GES DISC

    Data.gov (United States)

    National Aeronautics and Space Administration — MRIRN2IM is the Nimbus-2 Medium Resolution Infrared Radiometer (MRIR) data product consisting of 4 x 5 inch photographic film sheets. Each film sheet contains an...

  9. MRIR/Nimbus-3 Images of Daytime Brightness Temperature on 4 x 5 inch Film Sheets V001 (MRIRN3IM) at GES DISC

    Data.gov (United States)

    National Aeronautics and Space Administration — MRIRN3IM is the Nimbus-3 Medium Resolution Infrared Radiometer (MRIR) data product consisting of 4 x 5 inch photographic film sheets. Each film sheet contains an...

  10. Zograscopic viewing.

    Science.gov (United States)

    Koenderink, Jan; Wijntjes, Maarten; van Doorn, Andrea

    2013-01-01

    The "zograscope" is a "visual aid" (commonly known as "optical machine" in the 18th century) invented in the mid-18th century, and in general use until the early 20th century. It was intended to view single pictures (thus not stereographic pairs) with both eyes. The optics approximately eliminates the physiological cues (binocular disparity, vergence, accommodation, movement parallax, and image blur) that might indicate the flatness of the picture surface. The spatial structure of pictorial space is due to the remaining pictorial cues. As a consequence, many (or perhaps most) observers are aware of a heightened "plasticity" of the pictorial content for zograscopic as compared with natural viewing. We discuss the optics of the zograscope in some detail. Such an analysis is not available in the literature, whereas common "explanations" of the apparatus are evidently nonsensical. We constructed a zograscope, using modern parts, and present psychophysical data on its performance.

  11. Two members of the CERN HPD team present their babies. André Braem (left) holds in his hands a 5-inch glass HPD, while a ceramic HPD for medical applications is shown by Christian Joram. The large detector in the middle is a 10-inch HPD developed for an astrophysics experiment.

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    Two members of the CERN HPD team present their babies. André Braem (left) holds in his hands a 5-inch glass HPD, while a ceramic HPD for medical applications is shown by Christian Joram. The large detector in the middle is a 10-inch HPD developed for an astrophysics experiment.

  12. Some Measurements of Noise Transmission and Stress Response of a 0.020-Inch Duralumin Panel in the Presence of Air Flow

    Science.gov (United States)

    Kantarges, George T.

    1960-01-01

    Noise transmission measurements were made for a 0.020-inch panel with and without air flow on its surface. Tests were conducted with both an absorbent and reverberant chamber behind the panel. Panel stresses for some of these tests were also determined. Noise spectra obtained inside the absorbent chamber with flow attached and flow not attached to the panel appeared to contain several peaks corresponding in frequency to panel vibration modes. These peaks were notably absent when the chamber was reverberant. The noise reduction through the test panel measured with the aid of an absorbent chamber for the flow-not-attached case is in general agreement with values predicted by the theoretical weight law, which assumes negligible panel stiffness. Corresponding data for the flow-attached case do not follow the weight law but rather indicate less noise reduction at the high frequencies. The main stress responses of the panel without air flow occurred at its fundamental vibration mode. In the presence of air flow the main response occurs in a vibration mode having a node line perpendicular to the direction of air flow.

  13. The effects of Earth's magnetic field on 3-inch diameter photomultipliers used in KM3NeT neutrino telescope

    Science.gov (United States)

    Giordano, V.; Aiello, S.; Leonora, E.; Randazzo, N.

    2016-04-01

    The KM3NeT neutrino telescope will be the largest underwater neutrino telescope and will be located in the abyss of the Mediterranean Sea. In neutrino telescopes the key element of the detector is the optical module and for KM3NeT it consists of 31 PMTs stored inside a transparent pressure-resistant glass sphere of 17-inch that serves as mechanical protection while ensuring good light transmission. Since the PMTs installed into an underwater neutrino telescope can change their orientation because of movements of the detector structure due to sea currents, the influence of Earth's magnetic field has been investigated. Magnetic shielding by means of a mu-metal cage is used to reduce magnetic effects and to make the response of the PMT sufficiently orientation independent. In order to quantify the effect on magnetic field, we compared measurements on variation of gain, transit time spread and detection efficiency for a 3-inch PMT in shielded and unshielded condition at 3 PMT inclinations. Data shows that variations are sufficiently low especially for timing properties.

  14. Application of Derrick Corporation's stack sizer technology for slimes reduction in 6 inch clean coal hydrocyclone circuits

    Energy Technology Data Exchange (ETDEWEB)

    Brodzik, P.

    2009-04-15

    The article discusses the successful introduction of Derrick Corporation's Stack Sizer technology for removing minus 200 mesh slimes from 6-inch coal hydrocyclone underflow prior to froth flotation or dewatering by screen bowl centrifuges. In 2006, the James River Coal Company selected the Stack Sizer fitted with Derrick 150 micron and 100 micron urethane screen panels for removal of the minus 100 mesh high ash clay fraction from the clean coal spiral product circuits. After this application proved successful, Derrick Corporation introduced new 75 micron urethane screen panels for use on the Stack Sizer. Evaluation of feed slurry to flotation cells and screen bowl centrifuges showed significant amounts of minus 75 micron that could potentially be removed by efficient screening technology. Removal of the minus 75 micron fraction was sought to reduce ash and moisture content of the final clean coal product. Full-scale lab tests confirmed that the Stack Sizer fitted with Derrick 75 micron urethane screen panels consistently reduced the minus 75 micron percentage in coal slurry from 6-inch clean coal hydrocyclone underflow that is approximately 15 to 20% solid by-weight and 30 to 60% minus 75 micron to a clean coal fraction that is approximately 13 to 16% minus 75 micron. As a result total ash is reduced from approximately 36 to 38% in the hydrocyclone underflow to 14 to 16% in the oversize product fraction form the Stack Sizers. 1 fig., 2 tabs., 5 photos.

  15. Experimental Investigation of Project Orion Crew Exploration Vehicle Aeroheating: LaRC 20-Inch Mach 6 Air Tunnel Test 6931

    Science.gov (United States)

    Hollis, Brian R.

    2009-01-01

    An investigation of the aeroheating environment of the Project Orion Crew Entry Vehicle has been performed in the Langley Research Center 20-Inch Mach 6 Air Tunnel. Data were measured on a approx.3.5% scale model (0.1778-m/7-inch diameter) of the vehicle using coaxial thermocouples at free stream Reynolds numbers of 2.0 10(exp 6)/ft to 7.30 10(exp 6)/ft and computational predictions were generated for all test conditions. The primary goals of this test were to obtain convective heating data for use in assessing the accuracy of the computational technique and to validate test methodology and heating data from a test of the same wind tunnel model in the Arnold Engineering Development Center Tunnel 9. Secondary goals were to determine the extent of transitional/turbulent data which could be produced on a CEV model in this facility, either with or without boundary-layer trips, and to demonstrate continuous pitch-sweep operation in this tunnel for heat transfer testing.

  16. Zograscopic Viewing

    Directory of Open Access Journals (Sweden)

    Jan Koenderink

    2013-05-01

    Full Text Available The “zograscope” is a “visual aid” (commonly known as “optical machine” in the 18th century invented in the mid-18th century, and in general use until the early 20th century. It was intended to view single pictures (thus not stereographic pairs with both eyes. The optics approximately eliminates the physiological cues (binocular disparity, vergence, accommodation, movement parallax, and image blur that might indicate the flatness of the picture surface. The spatial structure of pictorial space is due to the remaining pictorial cues. As a consequence, many (or perhaps most observers are aware of a heightened “plasticity” of the pictorial content for zograscopic as compared with natural viewing. We discuss the optics of the zograscope in some detail. Such an analysis is not available in the literature, whereas common “explanations” of the apparatus are evidently nonsensical. We constructed a zograscope, using modern parts, and present psychophysical data on its performance.

  17. Vertical gradient freeze of 4 inch Ge crystals in a heater-magnet module

    Science.gov (United States)

    Frank-Rotsch, Ch.; Rudolph, P.

    2009-04-01

    For the first time 4-in. Ge single crystals were grown using the vertical gradient freeze technique (VGF) in a traveling magnetic field (TMF) generated in a heater-magnet module (HMM). The HMM was placed closely around the growth container inside the chamber of the industrial Bridgman equipment "Kronos". The HMM generates heat and a TMF together. It has a coil-shaped design and replaces the standard meander-type heater. Direct current (DC) for heat production and out-of-phase-accelerated currents (AC) for TMF generation were simultaneously delivered to three equally spaced coil segments connected by star-type wiring. In order to achieve a nearly flat and slightly convex growing interface the AC amplitude, frequency and phase shift have been optimized numerically by using the 3D CrysMAS code and validated by striation analysis on as-grown crystals. Low-field frequencies in the range f=20-50 Hz proved to be of most suitable condition. TMF programming is required to obtain constant interface morphology over the whole growth run. First Ge single crystals grown under nearly optimal conditions show reduced macro- and micro-inhomogeneities, relatively low dislocation density of (3-10)×10 2 cm -2, and high carrier mobility of μp=2800 cm 2 V -1 s -1.

  18. Test report on experimental stress analysis of a 24 inch diameter tee (ORNL T-13)

    International Nuclear Information System (INIS)

    Henley, D.R.

    1975-03-01

    The experimental stress analysis and low cycle fatigue test of one 24 in. x 24 in. x 10 in. schedule 160 carbon steel, ANSI B16.9 tee performed by Combustion Engineering, Inc. are described. The tee was instrumented with 230 rectangular strain gage rosettes. Elastic data was obtained for 12 loading conditions consisting of internal pressure and orthogonal pure moments and orthogonal direct forces applied individually to the free branch and run ends of the tee. One of the run ends of the tee was ''built in'' throughout the test. All loads were applied through pipe extensions welded to the tee. The tee was tested to failure in a low cycle pressure fatigue test with a cyclic internal pressure between 100 psi and 7000 psi. A through-the-wall fatigue crack occurred at 15,084 cycles. Significant test results are summarized and compared with design values tabulated in the ASME Boiler and Pressure Vessel Code, Section III, 1971. (U.S.)

  19. Characterization of the first double-sided 3D radiation sensors fabricated at FBK on 6-inch silicon wafers

    International Nuclear Information System (INIS)

    Sultan, D.M.S.; Mendicino, R.; Betta, G.-F. Dalla; Boscardin, M.; Ronchin, S.; Zorzi, N.

    2015-01-01

    Following 3D pixel sensor production for the ATLAS Insertable B-Layer, Fondazione Bruno Kessler (FBK) fabrication facility has recently been upgraded to process 6-inch wafers. In 2014, a test batch was fabricated to check for possible issues relevant to this upgrade. While maintaining a double-sided fabrication technology, some process modifications have been investigated. We report here on the technology and the design of this batch, and present selected results from the electrical characterization of sensors and test structures. Notably, the breakdown voltage is shown to exceed 200 V before irradiation, much higher than in earlier productions, demonstrating robustness in terms of radiation hardness for forthcoming productions aimed at High Luminosity LHC upgrades

  20. Two inch large area patterning on a vertical light-emitting diode by nano-imprinting technology

    International Nuclear Information System (INIS)

    Byeon, Kyeong-Jae; Hong, Eun-Ju; Park, Hyoungwon; Yoon, Kyung-Min; Lee, Heon; Song, Hyun Don; Lee, Jin Wook; Kim, Sun-Kyung; Cho, Hyun Kyong; Kwon, Ho Ki

    2010-01-01

    A vertical light-emitting diode (LED) with a chip size of 500 × 500 µm 2 was fabricated by the laser lift-off (LLO) process of an InGaN-based blue LED wafer. After the LLO process, photonic crystal patterns by UV nano-imprint lithography were formed on the n-GaN top layer of the vertical LED over the entire area with a diameter of 2 inches. As the result of n-GaN patterning, light output power of the vertical LED with photonic crystals was increased by up to 44% compared to that of the vertical LED without a photonic crystal at a driving current of 1000 mA

  1. Television viewing and childhood obesity.

    Science.gov (United States)

    Robinson, T N

    2001-08-01

    Children spend a substantial portion of their lives watching television. Investigators have hypothesized that television viewing causes obesity by one or more of three mechanisms: (1) displacement of physical activity, (2) increased calorie consumption while watching or caused by the effects of advertising, and (3) reduced resting metabolism. The relationship between television viewing and obesity has been examined in a relatively large number of cross-sectional epidemiologic studies but few longitudinal studies. Many of these studies have found relatively weak, positive associations, but others have found no associations or mixed results; however, the weak and variable associations found in these studies may be the result of limitations in measurement. Several experimental studies of reducing television viewing recently have been completed. Most of these studies have not tested directly the effects of reducing television viewing behaviors alone, but their results support the suggestion that reducing television viewing may help to reduce the risk for obesity or help promote weight loss in obese children. Finally, one school-based, experimental study was designed specifically to test directly the causal relationship between television viewing behaviors and body fatness. The results of this randomized, controlled trial provide evidence that television viewing is a cause of increased body fatness and that reducing television viewing is a promising strategy for preventing childhood obesity.

  2. The development of 8 inch roll-to-plate nanoimprint lithography (8-R2P-NIL) system

    Science.gov (United States)

    Lee, Lai Seng; Mohamed, Khairudin; Ooi, Su Guan

    2017-07-01

    Growth in semiconductor and integrated circuit industry was observed in the past decennium of years for industrial technology which followed Moore's law. The line width of nanostructure to be exposed was influenced by the essential technology of photolithography. Thus, it is crucial to have a low cost and high throughput manufacturing process for nanostructures. Nanoimprint Lithography technique invented by Stephen Y. Chou was considered as major nanolithography process to be used in future integrated circuit and integrated optics. The drawbacks of high imprint pressure, high imprint temperature, air bubbles formation, resist sticking to mold and low throughput of thermal nanoimprint lithography on silicon wafer have yet to be solved. Thus, the objectives of this work is to develop a high throughput, low imprint force, room temperature UV assisted 8 inch roll to plate nanoimprint lithography system capable of imprinting nanostructures on 200 mm silicon wafer using roller imprint with flexible mold. A piece of resist spin coated silicon wafer was placed onto vacuum chuck drives forward by a stepper motor. A quartz roller wrapped with a piece of transparent flexible mold was used as imprint roller. The imprinted nanostructures were cured by 10 W, 365 nm UV LED which situated inside the quartz roller. Heat generated by UV LED was dissipated by micro heat pipe. The flexible mold detaches from imprinted nanostructures in a 'line peeling' pattern and imprint pressure was measured by ultra-thin force sensors. This system has imprinting speed capability ranging from 0.19 mm/s to 5.65 mm/s, equivalent to imprinting capability of 3 to 20 pieces of 8 inch wafers per hour. Speed synchronization between imprint roller and vacuum chuck was achieved by controlling pulse rate supplied to stepper motor which drive the vacuum chuck. The speed different ranging from 2 nm/s to 98 nm/s is achievable. Vacuum chuck height was controlled by stepper motor with displacement of 5 nm/step.

  3. Updating Recursive XML Views of Relations

    DEFF Research Database (Denmark)

    Choi, Byron; Cong, Gao; Fan, Wenfei

    2009-01-01

    This paper investigates the view update problem for XML views published from relational data. We consider XML views defined in terms of mappings directed by possibly recursive DTDs compressed into DAGs and stored in relations. We provide new techniques to efficiently support XML view updates...... specified in terms of XPath expressions with recursion and complex filters. The interaction between XPath recursion and DAG compression of XML views makes the analysis of the XML view update problem rather intriguing. Furthermore, many issues are still open even for relational view updates, and need...... to be explored. In response to these, on the XML side, we revise the notion of side effects and update semantics based on the semantics of XML views, and present effecient algorithms to translate XML updates to relational view updates. On the relational side, we propose a mild condition on SPJ views, and show...

  4. Direct selling particularities

    OpenAIRE

    Greifová, Daniela

    2009-01-01

    Bachelor thesis is focused on the parcularities of direct selling, self regulation of this industry, multi-level marketing which is the most used sales method in the field of direct selling. The part of the thesis is dedicated to the issue of customer psychology that is very important for achieving success in direct selling. Main goals are to provide readers with the general view of direct selling and analysis of growing possibilities of the industry in the future.

  5. 78 FR 60656 - Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters

    Science.gov (United States)

    2013-10-02

    .... Department of Transportation, Docket Operations Office, M-30, West Building Ground Floor, Room W12- 140, 1200... dislocate the outboard discharge tube, which directs fire extinguishing agent to a specific area of the... modify the No. 1 engine tube within 120 days. The ASB specifies procedures to cut two inches off the tube...

  6. First mile, first inch

    CSIR Research Space (South Africa)

    Morris, C

    2007-05-01

    Full Text Available Access to Information and Communication Technologies (ICTs) remains one of the biggest challenges to Africa in leapfrogging the development chasm. The African digital divide can be in part attributed to a restrictive regulatory policy...

  7. Assessment of RELAP/MOD3 using BETHSY 6.2TC 6-inch cold leg side break comparative test

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Young-Jong; Jeong, Jae-Jun; Chang, Won-Pyo; Kim, Dong-Su [Korea Atomic Energy Research Institute, Yusung, Taejon (Korea, Republic of)] [and others

    1996-10-01

    This report presents the results of the RELAP5/MOD3 Version 7j assessment on BETHSY 6.2TC. BETHSY 6.2TC test corresponding to a six inch cold leg break LOCA of the Pressurizer Water Reactor(PWR). The primary objective of the test was to provide reference data of two facilities of different scales (BETHSY and LSTF facility). On the other hand, the present calculation aims at analysis of RELAP5/N4OD3 capability on the small break LOCA simulation, The results of calculation have shown that the RELAP5/MOD3 reasonably predicts occurrences as well as trends of the major phenomena such as primary pressure, timing of loop seal clearing, liquid hold up, etc. However, some disagreements also have been found in the predictions of loop seal clearing, collapsed core water level after loop seal clearing, and accumulator injection behaviors. For better understanding of discrepancies in same predictions, several sensitivity calculations have been performed as well. These include the changes of two-phase discharge coefficient at the break junction and some corrections of the interphase drag term. As result, change of a single parameter has not improved the overall predictions and it has been found that the interphase drag model has still large uncertainties.

  8. Assessment of RELAP/MOD3 using BETHSY 6.2TC 6-inch cold leg side break comparative test

    International Nuclear Information System (INIS)

    Chung, Young-Jong; Jeong, Jae-Jun; Chang, Won-Pyo; Kim, Dong-Su

    1996-10-01

    This report presents the results of the RELAP5/MOD3 Version 7j assessment on BETHSY 6.2TC. BETHSY 6.2TC test corresponding to a six inch cold leg break LOCA of the Pressurizer Water Reactor(PWR). The primary objective of the test was to provide reference data of two facilities of different scales (BETHSY and LSTF facility). On the other hand, the present calculation aims at analysis of RELAP5/N4OD3 capability on the small break LOCA simulation, The results of calculation have shown that the RELAP5/MOD3 reasonably predicts occurrences as well as trends of the major phenomena such as primary pressure, timing of loop seal clearing, liquid hold up, etc. However, some disagreements also have been found in the predictions of loop seal clearing, collapsed core water level after loop seal clearing, and accumulator injection behaviors. For better understanding of discrepancies in same predictions, several sensitivity calculations have been performed as well. These include the changes of two-phase discharge coefficient at the break junction and some corrections of the interphase drag term. As result, change of a single parameter has not improved the overall predictions and it has been found that the interphase drag model has still large uncertainties

  9. Development of a 55 μm pitch 8 inch CMOS image sensor for the high resolution NDT application

    Science.gov (United States)

    Kim, M. S.; Kim, G.; Cho, G.; Kim, D.

    2016-11-01

    A CMOS image sensor (CIS) with a large area for the high resolution X-ray imaging was designed. The sensor has an active area of 125 × 125 mm2 comprised with 2304 × 2304 pixels and a pixel size of 55 × 55 μm2. First batch samples were fabricated by using an 8 inch silicon CMOS image sensor process with a stitching method. In order to evaluate the performance of the first batch samples, the electro-optical test and the X-ray test after coupling with an image intensifier screen were performed. The primary results showed that the performance of the manufactured sensors was limited by a large stray capacitance from the long path length between the analog multiplexer on the chip and the bank ADC on the data acquisition board. The measured speed and dynamic range were limited up to 12 frame per sec and 55 dB respectively, but other parameters such as the MTF, NNPS and DQE showed a good result as designed. Based on this study, the new X-ray CIS with ~ 50 μm pitch and ~ 150 cm2 active area are going to be designed for the high resolution X-ray NDT equipment for semiconductor and PCB inspections etc.

  10. Refurbishment and modification of existing protective shipping packages (for 30-inch UF{sub 6} cylinders) per USDOT specification No. USA-DOT-21PF-1A

    Energy Technology Data Exchange (ETDEWEB)

    Housholder, W.R. [Nuclear Containers, Incorporated, Elizabethton, TN (United States)

    1991-12-31

    This paper addresses the refurbishment procedures for existing shipping containers for 30-inch diameter UF{sub 6} cylinders in accordance with DOT Specification 21PF-1 and the criteria used to determine rejection when such packages are unsuitable for refurbishment.

  11. Specification for modular plug-in unit and standard 19-inch rack mounting unit based on NIM standard (for electronic nuclear instruments)

    International Nuclear Information System (INIS)

    1978-01-01

    The object is to define standard dimensions of a modular system based on NIM standard and comprising the plug-in unit Type N specified in IEC Publication 482, Dimensions of Electronic Instrument Modules (for Nuclear Electronic Instruments), the corresponding 19-inch rack mounting unit Type NC (conforming to IEC Publication 297, Dimensions of Panels and Racks) and the associated connectors. (author)

  12. A comparison of the McGrath® Series 5 videolaryngoscope and Macintosh laryngoscope for double-lumen tracheal tube placement in patients with a good glottic view at direct laryngoscopy.

    Science.gov (United States)

    Yao, W L; Wan, L; Xu, H; Qian, W; Wang, X R; Tian, Y K; Zhang, C H

    2015-07-01

    We compared the McGrath® Series 5 videolaryngoscope with the Macintosh laryngoscope for double-lumen tracheal tube placement in patients with a predicted good glottic view on assessment of the airway. An initial laryngoscopy was performed using the Macintosh laryngoscope; 96 patients with Cormack and Lehane grade-1 or -2a views were randomly assigned to undergo intubation using either the McGrath or Macintosh device. Compared with the Macintosh laryngoscope, the McGrath videolaryngoscope provided more Cormack and Lehane grade-1 views (47 (97.9%) vs 29 (60.4%), p Cormack and Lehane grade ≥ 2b on initial laryngoscopy using the Macintosh, the glottic view was improved on intubation with the McGrath videolaryngoscope, with a total success rate of double-lumen tube placement of 94.4% and mean (SD) intubation time of 50.0 (18.6) s. We recommend that in patients with a low airway risk index score requiring intubation with a double-lumen tracheal tube, the Macintosh laryngoscope is used as the first device and the McGrath videolaryngoscope is used only if this provides a poor glottic view. © 2015 The Association of Anaesthetists of Great Britain and Ireland.

  13. Hitler's Reich Viewed from 1984

    Science.gov (United States)

    Ward, James E.

    1971-01-01

    Viewed within a context of Orwell's 1984," the author's visit to East Germany, and particularly to the Museum for German History, revealed the efforts of an authoritarian regime to manipulate the thoughts and directions of that society to its own advantage. (JB)

  14. How perception of ultra-high definition is modified by viewing distance and screen size

    Science.gov (United States)

    Lachat, Amélie; Gicquel, Jean-Charles; Fournier, Jérôme

    2015-01-01

    Ultra High Definition (UHD) is a new technology, which main idea is to improve user's perception of details and sensation of immersion in comparison with High Definition systems (HD). However, it is important to understand the influence of the new UHD technical parameters on user's perception. Hence, to investigate the influence of the viewing distance, screen size and scene content on perceived video quality and feelings of users, a series of subjective experiments with four different contents (3 documentaries and 1 sport content) shooted by UHD camera were performed. These contents were displayed using three different image resolutions (SD, HD, UHD) and two UHD displays (55-inch and 84-inch). Each subject had to assess content for three different viewing distances (1.5, 3, 4.5 times of the screen height corresponding to optimal viewing distances of respectively UHD, HD, and close to SD optimal distance). Finally, 72 test conditions were evaluated. For each scene, observers reported their opinion on the perceived video quality using a 5-grade subjective scale. Results have shown that viewing distance has a significant influence on perceived quality. Moreover the highest MOS was obtained at optimal viewing for UHD, with a small difference between HD an UHD. At 3H and 4.5H, there is no difference from a statistical point of view. Screen size influences the perception of quality but not in the same way for the three image resolution and three viewing distances.

  15. View of silicon disc to be left on moon by Apollo 11 astronauts

    Science.gov (United States)

    1969-01-01

    Closeup view of the one and one-half inch silicon disc which will be left on the moon by the Apollo 11 astronauts. The disc bears meassages of goodwill from heads of state of many nations. The process used to make this wafer is the same as that used to manufacture integrated circuits for electronic equipment. The Kennedy half-dollar illustrates the relative size of the memorial disc.

  16. Columbia Gas preserves wetlands with directional drilling

    International Nuclear Information System (INIS)

    Luginbuhl, K.K.; Gartman, D.K.

    1995-01-01

    This paper reviews the use of directional drilling to install a 12 inch natural gas pipeline near Avon, Ohio. As a result of increased demand, the utility decided that it would need additional lines for pressure control with the only feasible route being through a forested and scrub/shrub wetland. This paper reviews the permitting requirements along with the directional drilling design and operation. Unfortunately during drilling, bentonite drilling fluids came to the surface requiring remedial action procedures. The paper then provides a detailed clean up strategy and makes recommendations on how to prevent such a break through in the future

  17. Teacher educators and student-directed learning

    NARCIS (Netherlands)

    Lunenberg, Mieke; Korthagen, Fred A J

    This article describes the results of a study on the views of teacher educators, and the way these views are expressed in practice. The study focuses on views of learning and teaching that can promote a shift from teacher educator-directed learning to student-directed learning. We found that teacher

  18. Lighting for remote viewing systems

    International Nuclear Information System (INIS)

    Draper, J.V.

    1984-01-01

    Scenes viewed by television do not provide the same channels of information for judgement of distances as scenes viewed directly, since television eliminates or degrades several depth perception cues. However, it may be possible to improve depth perception of televised scenes by enhancing the information available through depth cues that are available from lighting. A literature survey and expert opinions were integrated to design a remote lighting arrangement which could enhance depth perception of operators performing remote handling operations. This paper describes the lighting arrangement and discusses some of its advantages and disadvantages. 10 references, 2 figures

  19. Lighting for remote viewing systems

    International Nuclear Information System (INIS)

    Draper, J.V.

    1984-01-01

    Scenes viewed by television do not provide the same channels of information for judgment of distances as scenes viewed directly, since television eliminates or degrades several depth perception cues. However, it may be possible to improve depth perception of televised scenes by enhancing the information available through depth cues that are available from lighting. A literature survey and expert opinions were integrated to design a remote lighting arrangement which could enhance depth perception of operators performing remote handling operations. This paper describes the lighting arrangement and discusses some of its advantages and disadvantages. 10 references, 2 figures

  20. Lighting for remote viewing systems

    International Nuclear Information System (INIS)

    Draper, J.V.

    1984-01-01

    Scenes viewed by television do not provide the same channels of information for judgment of distances as scenes viewed directly, since television eliminates or degrades several depth perception cues. However, it may be possible to improve depth perception of televised scenes by enhancing the information available through depth cues that are available from lighting. A literature survey and expert opinions were integrated to design a remote lighting arrangement which could enhance depth perception of operators performing remote handling operations. This paper describes the lighting arrangement and discusses some of its advantages and disadvantages

  1. Lighting for remote viewing systems

    Energy Technology Data Exchange (ETDEWEB)

    Draper, J.V.

    1984-01-01

    Scenes viewed by television do not provide the same channels of information for judgment of distances as scenes viewed directly, since television eliminates or degrades several depth perception cues. However, it may be possible to improve depth perception of televised scenes by enhancing the information available through depth cues that are available from lighting. A literature survey and expert opinions were integrated to design a remote lighting arrangement which could enhance depth perception of operators performing remote handling operations. This paper describes the lighting arrangement and discusses some of its advantages and disadvantages. 10 references, 2 figures.

  2. Lighting for remote viewing systems

    Energy Technology Data Exchange (ETDEWEB)

    Draper, J.V.

    1984-01-01

    Scenes viewed by television do not provide the same channels of information for judgement of distances as scenes viewed directly, since television eliminates or degrades several depth perception cues. However, it may be possible to improve depth perception of televised scenes by enhancing the information available through depth cues that are available from lighting. A literature survey and expert opinions were integrated to design a remote lighting arrangement which could enhance depth perception of operators performing remote handling operations. This paper describes the lighting arrangement and discusses some of its advantages and disadvantages. 10 references, 2 figures.

  3. Vertical Force-deflection Characteristics of a Pair of 56-inch-diameter Aircraft Tires from Static and Drop Tests with and Without Prerotation

    Science.gov (United States)

    Smiley, Robert F; Horne, Walter B

    1957-01-01

    The vertical force-deflection characteristics were experimentally determined for a pair of 56-inch-diameter tires under static and drop-test conditions with and without prerotation. For increasing force, the tires were found to be least stiff for static tests, almost the same as for the static case for prerotation drop tests as long as the tires remain rotating, and appreciably stiffer for drop tests without prerotation.

  4. 49 CFR 231.24 - Box and other house cars with roofs, 16 feet 10 inches or more above top of rail. 1

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Box and other house cars with roofs, 16 feet 10... APPLIANCE STANDARDS § 231.24 Box and other house cars with roofs, 16 feet 10 inches or more above top of.... Same as specified for “Box and Other House Cars.” (2) Dimensions. Same as specified for “Box and Other...

  5. Opportunity's View After Drive on Sol 1806

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this full-circle view of the rover's surroundings just after driving 60.86 meters (200 feet) on the 1,806th Martian day, or sol, of Opportunity's surface mission (Feb. 21, 2009). North is at the center; south at both ends. Tracks from the drive extend northward across dark-toned sand ripples and light-toned patches of exposed bedrock in the Meridiani Planum region of Mars. For scale, the distance between the parallel wheel tracks is about 1 meter (about 40 inches). Engineers designed the Sol 1806 drive to be driven backwards as a strategy to redistribute lubricant in the rovers wheels. The right-front wheel had been showing signs of increased friction. The rover's position after the Sol 1806 drive was about 2 kilometer (1.2 miles) south southwest of Victoria Crater. Cumulative odometry was 14.74 kilometers (9.16 miles) since landing in January 2004, including 2.96 kilometers (1.84 miles) since climbing out of Victoria Crater on the west side of the crater on Sol 1634 (August 28, 2008). This view is presented as a cylindrical projection with geometric seam correction.

  6. Single-pass multi-view volume rendering

    OpenAIRE

    Hübner, T; Pajarola, R

    2007-01-01

    In this paper, we introduce a new direct volume rendering (DVR) algorithm for multi-view auto-stereoscopic displays. Common multi-view methods perform multi-pass rendering (one pass for each view) and subsequent image compositing and masking for generating multiple views. The rendering time increases therefore linearly with the number of views, but sufficient frame-rates are achieved by sub-resolution rendering, at the expense of degraded image quality. To overcome these disadvantages for DVR...

  7. The workplace window view

    DEFF Research Database (Denmark)

    Lottrup, Lene Birgitte Poulsen; Stigsdotter, Ulrika K.; Meilby, Henrik

    2015-01-01

    Office workers’ job satisfaction and ability to work are two important factors for the viability and competitiveness of most companies, and existing studies in contexts other than workplaces show relationships between a view of natural elements and, for example, student performance...... and neighbourhood satisfaction. This study investigates whether relationships between window view, and work ability and job satisfaction also exist in the context of the workplace by focusing on office workers’ view satisfaction. The results showed that a view of natural elements was related to high view...... satisfaction, and that high view satisfaction was related to high work ability and high job satisfaction. Furthermore, the results indicated that job satisfaction mediated the effect of view satisfaction on work ability. These findings show that a view of a green outdoor environment at the workplace can...

  8. QlikView scripting

    CERN Document Server

    Floyd, Matt

    2013-01-01

    This mini book offers information about QlikView scripting written in an easy-to-understand manner, and covers QlikView scripting from basic to advanced features in a compact format.If you are a basic orintermediate developer with some knowledge of QlikView applications and a basic understanding of QlikView scripting and data extraction and manipulation, this book will be great for you. If you are an advanced user, you can also use this book as a reference guide and teaching aid. If you are a QlikView project team member such as a business user, data/ETL professional, project manager, orsystem

  9. Experimental and numerical approach on fracture behaviour of four inches diameter carbon-manganese cracked welded pipes in four point bending

    International Nuclear Information System (INIS)

    Semete, P.; Faidy, C.; Lautier, J.L.

    2001-01-01

    EDF has conducted a research programme to demonstrate the fracture resistance of carbon-manganese welded pipes. The main task of this programme consisted of testing three four inches diameter (114.3 mm O.D.) thin welded pipes (8.56 mm thick) which are representative of those of the sites. The three pipes were loaded under four point bending at a quasi-static rate at -20 C till their maximum bending moment was reached. This paper presents the experimental results, finite element calculations and their comparison with the simplified fracture assessment method of the RSE-M Code. (author)

  10. Analysis of risk and dose when using thermal protection on non-fissile and fissile-excepted UF6 48-inch cylinder packages

    International Nuclear Information System (INIS)

    Chambers, D.B.; Lowe, L.M.; Elizabeth Darrough, M.; Jones, R.H.

    2004-01-01

    An industry consortium of owners of large (i.e., the 48-inch or 48X and 48Y) cylinders commissioned an independent study to evaluate the safety of using thermal protective covers on the cylinders and the likelihood that the cylinders would experience the regulations' hypothetical thermal accident. The study examined the demonstrable risks of the protective covers, i.e., increased dose to workers and the potential for accidents associated with the extra handling, vs. the theoretical risk of the UF 6 cylinders' encountering the hypothetical fire, to evaluate the appropriateness of using the thermal protective covers

  11. Synchronizing XPath Views

    DEFF Research Database (Denmark)

    Pedersen, Dennis; Pedersen, Torben Bach

    2004-01-01

    . However, the XML data sources are often independent of the data consumers and may change their schemas without notification, invalidating the XML views defined by the data consumers. This requires the view definitions to be updated to reflect the new structure of the data sources, a process termed view......The increasing availability of XML-based data sources, e.g., for publishing data on the WWW, means that more and more applications (data consumers) rely on accessing and using XML data. Typically, the access is achieved by defining views over the XML data, and accessing data through these views...... synchronization. XPath is the most commonly used language for retrieving parts of XML documents, and is thus an important cornerstone for XML view definitions. This paper presents techniques for discovering schema changes in XML data sources and synchronizing XPath-based views to reflect these schema changes...

  12. Aerial Photography and Imagery, Ortho-Corrected, 4 inch aerial photography (color, infrared, and color oblique) in urban areas, 1 foot in national forest, Published in 2006, 1:600 (1in=50ft) scale, Los Angeles County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Aerial Photography and Imagery, Ortho-Corrected dataset current as of 2006. 4 inch aerial photography (color, infrared, and color oblique) in urban areas, 1 foot in...

  13. Aerial Photography and Imagery, Ortho-Corrected, Spring 2006 - natural color - countywide 12 inch pixel orthophotography - County of Polk, Wisconsin, Published in 2006, 1:2400 (1in=200ft) scale, Polk County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Aerial Photography and Imagery, Ortho-Corrected dataset current as of 2006. Spring 2006 - natural color - countywide 12 inch pixel orthophotography - County of Polk,...

  14. Aerial Photography and Imagery, Ortho-Corrected, Six-inch orthoimagery of Washburn County, Wisconsin. The imagery was collected May 5, 2004 by ImageAmerica, Published in 2004, 1:4800 (1in=400ft) scale, Washburn County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Aerial Photography and Imagery, Ortho-Corrected dataset current as of 2004. Six-inch orthoimagery of Washburn County, Wisconsin. The imagery was collected May 5,...

  15. Analysis in vitro of direct bonding system with cyanoacrylate ester and orthodontic wires.

    Science.gov (United States)

    Manfrin, Thais Mara; Poi, Wilson Roberto; de Mendonça, Marcos Rogério; Cardoso, Leandro Carvalho; Massa Sundefeld, Maria Lúcia Marçal; Sonoda, Celso Koogi; Panzarini, Sônia Regina

    2009-04-01

    The aim of this study was to evaluate the tensile strength of orthodontic wires bonded onto the enamel with cyanoacrylate ester. To obtain the specimens, 120 human premolars (extracted for orthodontic or periodontal reasons) were included in acrylic blocks of rapid polymerization with three teeth each. Four groups were formed with ten specimens each. In the specimens, a dental splint model was made with cyanoacrylate ester and round stainless steel wire. In groups I, II and III, cyanoacrylate ester was used with round steel wires, with variation in diameter: 0.014 inches; 0.016 inches and 0.018 inches, respectively. In group IV, round steel wire 0.018 inches was used with photo polymerizing resin composite with previous acid etching. The adhesive force of the materials was measured in two points under the action of the tensiometer (ETM-USA). The number of loose wires was counted along with those that remained fixed according to the different levels of force applied because of the direction of the tensile force (vertical or horizontal) and the diameter of the wire used. The data obtained were first submitted to a descriptive analysis and then submitted to a statistical analysis (Friedman's Test and Dunn's Test of Multiple Comparison - Epi-info 3.2). Within the limitations of the experimental conditions presented, the cyanoacrylate ester or 'Super Bonder' maintained bonded to enamel and steel wires (0.016 and 0.018 inches) during the tensile strength tests under different levels of applied forces.

  16. Exploring Natural and Social Scientists' Views of Nature of Science

    Science.gov (United States)

    Bayir, Eylem; Cakici, Yilmaz; Ertas, Ozge

    2014-01-01

    Science education researchers recently turned their attention to exploring views about nature of science (NOS). A large body of research indicates that both students and teachers have many naïve views about the NOS. Unfortunately, less attention has been directed at the issue of exploring the views of the scientists. Also, the little research in…

  17. Directional Wide-Angle Range Finder (DWARF)

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation, the Directional Wide-Angle Range Finder (DWARF) is the creation of a laser range-finder with a wide field-of-view (FOV) and a directional...

  18. Different Views of Software Agent Paradigm

    OpenAIRE

    Anand Kumar Pandey; Rashmi Pandey

    2012-01-01

    Agent modelling in software engineering is a relatively young area, and there are, as yet, no standard methodologies, development tools, or software architectures. Although our work is emphasized on to represent the agent specifications using different views, they are not oriented for software engineering in terms of providing a modeling notation that directly supports software development. There are, however, some software frameworks using different views of software agents, that are beginni...

  19. Drupal 7 Views Cookbook

    CERN Document Server

    Green, J Ayen

    2012-01-01

    This is a cookbook containing plenty of easy-to-follow practical recipes with screenshots that will help you in mastering the Drupal Views module. Drupal 7 Views Cookbook is for developers or technically proficient users who are fairly comfortable with the concepts behind websites and the Drupal environment.

  20. Mastering QlikView

    CERN Document Server

    Redmond, Stephen

    2014-01-01

    If you are a business application developer or a system analyst who has learned QlikView and Qlik Sense and now want to take your learning to a higher level, then this book is for you.It is assumed that you are aware of the fundamentals of QlikView and have working knowledge of development and in-memory analytics.

  1. VMware horizon view essentials

    CERN Document Server

    von Oven, Peter

    2014-01-01

    If you are a desktop administrator or an end user of a computing project team looking to speed up to the latest VMware Horizon View solution, then this book is perfect for you. It is your ideal companion to deploy a solution to centrally manage and virtualize your desktop estate using Horizon View 6.0.

  2. Multi-view collimator for scintillation cameras

    International Nuclear Information System (INIS)

    Hatton, J.; Grenier, R.P.

    1979-01-01

    A collimator comprises a block or blocks of radiation-impervious material which defines a first plurality of parallel channels, each channel defining a direction of acceptance of radiation from a body. The axes of a second plurality channels define another direction of acceptance of radiation from the body and intersect the same portion of the body as the axes of the first plurality of channels thus producing a second view of the body. Where the collimator is built up as a stack of blocks, each pair of adjacent blocks defines a slice of the body which is viewed from two angles defined by the channels. (UK)

  3. Directed homology

    DEFF Research Database (Denmark)

    Fahrenberg, Uli

    2004-01-01

    We introduce a new notion of directed homology for semicubical sets. We show that it respects directed homotopy and is functorial, and that it appears to enjoy some good algebraic properties. Our work has applications to higher-dimensional automata.......We introduce a new notion of directed homology for semicubical sets. We show that it respects directed homotopy and is functorial, and that it appears to enjoy some good algebraic properties. Our work has applications to higher-dimensional automata....

  4. Radiation Characterization Summary: ACRR Central Cavity Free-Field Environment with the 32-Inch Pedestal at the Core Centerline (ACRR-FF-CC-32-cl).

    Energy Technology Data Exchange (ETDEWEB)

    Vega, Richard Manuel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Parma, Edward J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Naranjo, Gerald E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lippert, Lance L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Vehar, David W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Griffin, Patrick J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    This document presents the facilit y - recommended characteri zation o f the neutron, prompt gamma - ray, and delayed gamma - ray radiation fields in the Annular Core Research Reactor ( ACRR ) for the cen tral cavity free - field environment with the 32 - inch pedestal at the core centerline. The designation for this environmen t is ACRR - FF - CC - 32 - cl. The neutron, prompt gamma - ray , and delayed gamma - ray energy spectra , uncertainties, and covariance matrices are presented as well as radial and axial neutron and gamma - ray fluence profiles within the experiment area of the cavity . Recommended constants are given to facilitate the conversion of various dosimetry readings into radiation metrics desired by experimenters. Representative pulse operations are presented with conversion examples . Acknowledgements The authors wish to th ank the Annular Core Research Reactor staff and the Radiation Metrology Laboratory staff for their support of this work . Also thanks to David Ames for his assistance in running MCNP on the Sandia parallel machines.

  5. Neutron Reference Benchmark Field Specification: ACRR 44 Inch Lead-Boron (LB44) Bucket Environment (ACRR-LB44-CC-32-CL).

    Energy Technology Data Exchange (ETDEWEB)

    Vega, Richard Manuel [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Parma, Edward J. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Griffin, Patrick J. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Vehar, David W. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-07-01

    This report was put together to support the International Atomic Energy Agency (IAEA) REAL- 2016 activity to validate the dosimetry community’s ability to use a consistent set of activation data and to derive consistent spectral characterizations. The report captures details of integral measurements taken in the Annular Core Research Reactor (ACRR) central cavity with the 44 inch Lead-Boron (LB44) bucket, reference neutron benchmark field. The field is described and an “a priori” calculated neutron spectrum is reported, based on MCNP6 calculations, and a subject matter expert (SME) based covariance matrix is given for this “a priori” spectrum. The results of 31 integral dosimetry measurements in the neutron field are reported.

  6. Shock shapes on blunt bodies in hypersonic-hypervelocity helium, air, and CO2 flows, and calibration results in Langley 6-inch expansion tube

    Science.gov (United States)

    Miller, C. G., III

    1975-01-01

    Shock shape results for flat-faced cylinders, spheres, and spherically blunted cones in various test gases, along with preliminary results from a calibration study performed in the Langley 6-inch expansion tube are presented. Free-stream velocities from 5 to 7 km/sec are generated at hypersonic conditions with helium, air, and CO2, resulting in normal shock density ratios from 4 to 19. Ideal-gas shock shape predictions, in which an effective ratio of specific heats is used as input, are compared with the measured results. The effect of model diameter is examined to provide insight to the thermochemical state of the flow in the shock layer. The regime for which equilibrium exists in the shock layer for the present air and CO2 test conditions is defined. Test core flow quality, test repeatability, and comparison of measured and predicted expansion-tube flow quantities are discussed.

  7. Description and operating performance of a parallel-rail electric-arc system with helium driver gas for the Langley 6-inch expansion tube

    Science.gov (United States)

    Moore, J. A.

    1976-01-01

    A parallel-rail arc-discharge system to heat and pressurize the initial helium driver gas of the Langley 6-inch expansion tube is described. This system was designed for a 2.44-m-long driver vessel rated at 138 MPa, with a distance between rails of 20.3 cm. Electric energy was obtained from a capacitor storage system rated at 12,000 V with a maximum energy of 5 MJ. Tests were performed over a range of energy from 1.74 MJ to the maximum value. The operating experience and system performance are discussed, along with results from a limited number of expansion-tube tests with air and carbon dioxide as test gases.

  8. Opportunity's View After Drive on Sol 1806 (Stereo)

    Science.gov (United States)

    2009-01-01

    [figure removed for brevity, see original site] Left-eye view of a color stereo pair for PIA11816 [figure removed for brevity, see original site] Right-eye view of a color stereo pair for PIA11816 NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this stereo, full-circle view of the rover's surroundings just after driving 60.86 meters (200 feet) on the 1,806th Martian day, or sol, of Opportunity's surface mission (Feb. 21, 2009). North is at the center; south at both ends. This view combines images from the left-eye and right-eye sides of the navigation camera. It appears three-dimensional when viewed through red-blue glasses with the red lens on the left. Tracks from the drive extend northward across dark-toned sand ripples and light-toned patches of exposed bedrock in the Meridiani Planum region of Mars. For scale, the distance between the parallel wheel tracks is about 1 meter (about 40 inches). Engineers designed the Sol 1806 drive to be driven backwards as a strategy to redistribute lubricant in the rovers wheels. The right-front wheel had been showing signs of increased friction. The rover's position after the Sol 1806 drive was about 2 kilometer (1.2 miles) south southwest of Victoria Crater. Cumulative odometry was 14.74 kilometers (9.16 miles) since landing in January 2004, including 2.96 kilometers (1.84 miles) since climbing out of Victoria Crater on the west side of the crater on Sol 1634 (August 28, 2008). This view is presented as a cylindrical-perspective projection with geometric seam correction.

  9. Opportunity's View After Long Drive on Sol 1770 (Stereo)

    Science.gov (United States)

    2009-01-01

    [figure removed for brevity, see original site] Left-eye view of a color stereo pair for PIA11791 [figure removed for brevity, see original site] Right-eye view of a color stereo pair for PIA11791 NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this stereo, full-circle view of the rover's surroundings just after driving 104 meters (341 feet) on the 1,770th Martian day, or sol, of Opportunity's surface mission (January 15, 2009). This view combines images from the left-eye and right-eye sides of the navigation camera. It appears three-dimensional when viewed through red-blue glasses with the red lens on the left. Tracks from the drive extend northward across dark-toned sand ripples and light-toned patches of exposed bedrock in the Meridiani Planum region of Mars. For scale, the distance between the parallel wheel tracks is about 1 meter (about 40 inches). Prior to the Sol 1770 drive, Opportunity had driven less than a meter since Sol 1713 (November 17, 2008), while it used the tools on its robotic arm first to examine a meteorite called 'Santorini' during weeks of restricted communication while the sun was nearly in line between Mars and Earth, then to examine bedrock and soil targets near Santorini. The rover's position after the Sol 1770 drive was about 1.1 kilometer (two-thirds of a mile) south southwest of Victoria Crater. Cumulative odometry was 13.72 kilometers (8.53 miles) since landing in January 2004, including 1.94 kilometers (1.21 miles) since climbing out of Victoria Crater on the west side of the crater on Sol 1634 (August 28, 2008). This view is presented as a cylindrical-perspective projection with geometric seam correction.

  10. Polymer blend lithography for metal films: large-area patterning with over 1 billion holes/inch(2).

    Science.gov (United States)

    Huang, Cheng; Förste, Alexander; Walheim, Stefan; Schimmel, Thomas

    2015-01-01

    Polymer blend lithography (PBL) is a spin-coating-based technique that makes use of the purely lateral phase separation between two immiscible polymers to fabricate large area nanoscale patterns. In our earlier work (Huang et al. 2012), PBL was demonstrated for the fabrication of patterned self-assembled monolayers. Here, we report a new method based on the technique of polymer blend lithography that allows for the fabrication of metal island arrays or perforated metal films on the nanometer scale, the metal PBL. As the polymer blend system in this work, a mixture of polystyrene (PS) and poly(methyl methacrylate) (PMMA), dissolved in methyl ethyl ketone (MEK) is used. This system forms a purely lateral structure on the substrate at controlled humidity, which means that PS droplets are formed in a PMMA matrix, whereby both phases have direct contact both to the substrate and to the air interface. Therefore, a subsequent selective dissolution of either the PS or PMMA component leaves behind a nanostructured film which can be used as a lithographic mask. We use this lithographic mask for the fabrication of metal patterns by thermal evaporation of the metal, followed by a lift-off process. As a consequence, the resulting metal nanostructure is an exact replica of the pattern of the selectively removed polymer (either a perforated metal film or metal islands). The minimum diameter of these holes or metal islands demonstrated here is about 50 nm. Au, Pd, Cu, Cr and Al templates were fabricated in this work by metal PBL. The wavelength-selective optical transmission spectra due to the localized surface plasmonic effect of the holes in perforated Al films were investigated and compared to the respective hole diameter histograms.

  11. Polymer blend lithography for metal films: large-area patterning with over 1 billion holes/inch2

    Directory of Open Access Journals (Sweden)

    Cheng Huang

    2015-05-01

    Full Text Available Polymer blend lithography (PBL is a spin-coating-based technique that makes use of the purely lateral phase separation between two immiscible polymers to fabricate large area nanoscale patterns. In our earlier work (Huang et al. 2012, PBL was demonstrated for the fabrication of patterned self-assembled monolayers. Here, we report a new method based on the technique of polymer blend lithography that allows for the fabrication of metal island arrays or perforated metal films on the nanometer scale, the metal PBL. As the polymer blend system in this work, a mixture of polystyrene (PS and poly(methyl methacrylate (PMMA, dissolved in methyl ethyl ketone (MEK is used. This system forms a purely lateral structure on the substrate at controlled humidity, which means that PS droplets are formed in a PMMA matrix, whereby both phases have direct contact both to the substrate and to the air interface. Therefore, a subsequent selective dissolution of either the PS or PMMA component leaves behind a nanostructured film which can be used as a lithographic mask. We use this lithographic mask for the fabrication of metal patterns by thermal evaporation of the metal, followed by a lift-off process. As a consequence, the resulting metal nanostructure is an exact replica of the pattern of the selectively removed polymer (either a perforated metal film or metal islands. The minimum diameter of these holes or metal islands demonstrated here is about 50 nm. Au, Pd, Cu, Cr and Al templates were fabricated in this work by metal PBL. The wavelength-selective optical transmission spectra due to the localized surface plasmonic effect of the holes in perforated Al films were investigated and compared to the respective hole diameter histograms.

  12. A view on EOS

    Science.gov (United States)

    Lucchitta, Baerbel K.

    1989-11-01

    I am replying to the recent solicitation to provide views on NASA's Earth Observing System (EOS) to an AGU panel (Eos, October 3, p. 886). My view concerns Landsat. A flashy EOS poster, recently distributed, features six images from space; three of these are from the Landsat satellite. Yet no Landsat-type imaging system is contemplated for EOS. Imaging systems such as HIRIS and HRIS (high-resolution imaging spectrometers) do not give the synoptic view of Landsat and are much too elaborate for simple but invaluable observations of many global- scale processes.

  13. Improving the performance of a compression ignition engine by directing flow of inlet air

    Science.gov (United States)

    Kemper, Carlton

    1946-01-01

    The object of this report is to present the results of tests performed by the National Advisory Committee for Aeronautics to determine the effect on engine performance of directing the flow of the inlet air to a 5-inch by 7-inch cylinder, solid injection, compression ignition engine, After a few preliminary tests, comparative runs were made at a speed of 1500 r.p.m. with and without directed air flow. It was found that directing the flow of the inlet air toward the fuel injection valve gave steadier engine operation, and an appreciable increase in power, and decreased fuel consumption. The results indicate the possibility of improving the performance of a given type of combustion chamber without changing its shape and with no change in valve timing. They would also seem to prove that directional turbulence, set up before the inlet valve of a four-stroke cycle engine, continues in the engine cylinder throughout the compression stroke.

  14. "Private Views" Ungaris

    Index Scriptorium Estoniae

    1999-01-01

    9. juulist Dunaujvarosi Kaasaegse Kunsti Instituudis eesti ja briti kunstnike ühisnäitus "Private Views. Ruum taasavastatud eesti ja briti kaasaegses kunstis". Kuraatorid Pam Skelton, Mare Tralla. Osalejad.

  15. "Private Views" Ungaris

    Index Scriptorium Estoniae

    1999-01-01

    9. juulist Dunaujvarosi Kaasaegse Kunsti Instituudis eesti ja briti kunstnike ühisnäitus "Private Views. Ruum taasavastatud eesti ja briti kaasaegses kunstis" Kuraatorid Pam Skelton, Mare Tralla. Osalejad

  16. Selecting materialized views in a data warehouse

    Science.gov (United States)

    Zhou, Lijuan; Liu, Chi; Liu, Daxin

    2003-01-01

    A Data Warehouse contains lots of materialized views over the data provided by the distributed heterogeneous databases for the purpose of efficiently implementing decision-support or OLAP queries. It is important to select the right view to materialize that answer a given set of queries. In this paper, we have addressed and designed algorithm to select a set of views to materialize in order to answer the most queries under the constraint of a given space. The algorithm presented in this paper aim at making out a minimum set of views, by which we can directly respond to as many as possible user"s query requests. We use experiments to demonstrate our approach. The results show that our algorithm works better. We implemented our algorithms and a performance study of the algorithm shows that the proposed algorithm gives a less complexity and higher speeds and feasible expandability.

  17. Pronunciation Pedagogy and Theory: New Views, New Directions.

    Science.gov (United States)

    Morley, Joan, Ed.

    This collection of essays on pronunciation theory and practice as it relates to second language instruction includes: "Pronunciation Assessment in the ESL/EFL Curriculum" (Janet Goodwin, Donna Brinton, Marianne Celce-Murcia); "Empowering Students with Predictive Skills" (Wayne B. Dickerson); "Intonation: A Navigation Guide for the Listener" (Judy…

  18. Direct View of Hot Carrier Dynamics in Graphene

    DEFF Research Database (Denmark)

    Johannsen, Jens Christian; Ulstrup, Søren; Cilento, Federico

    2013-01-01

    The ultrafast dynamics of excited carriers in graphene is closely linked to the Dirac spectrum and plays a central role for many electronic and optoelectronic applications. Harvesting energy from excited electron-hole pairs, for instance, is only possible if these pairs can be separated before th...

  19. New directions in US development policies: A view from Washington ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2011-04-15

    Apr 15, 2011 ... Development expert Todd Moss analyzes these trends in US development policy and forecasts what changes to expect. He also relates these trends to Canada – facing some similar issues – including how the challenges will affect the way the two countries cooperate on development. Listen to the audio ...

  20. System Views on Entrepreneurship – Going in the Right Direction?

    DEFF Research Database (Denmark)

    Christensen, Jesper Lindgaard

    2016-01-01

    The literature on National Systems of Entrepreneurship (NSE) (Acs et al., 2014, 2016) has been claimed to be an important strand of entrepreneurship literature. This paper takes stock of system perspectives on entrepreneurship including recent re-vitalizations of the concept. Based on literature ...

  1. Direct Democracy

    DEFF Research Database (Denmark)

    Beramendi, Virginia; Ellis, Andrew; Kaufman, Bruno

    of direct democracy mechanisms in specific contexts. These country case studies allow for in depth discussion of particular issues, including signature collection and voter participation, campaign financing, media coverage, national variations in the usage of direct democracy procedures and national lessons...

  2. Immersive viewing engine

    Science.gov (United States)

    Schonlau, William J.

    2006-05-01

    An immersive viewing engine providing basic telepresence functionality for a variety of application types is presented. Augmented reality, teleoperation and virtual reality applications all benefit from the use of head mounted display devices that present imagery appropriate to the user's head orientation at full frame rates. Our primary application is the viewing of remote environments, as with a camera equipped teleoperated vehicle. The conventional approach where imagery from a narrow field camera onboard the vehicle is presented to the user on a small rectangular screen is contrasted with an immersive viewing system where a cylindrical or spherical format image is received from a panoramic camera on the vehicle, resampled in response to sensed user head orientation and presented via wide field eyewear display, approaching 180 degrees of horizontal field. Of primary interest is the user's enhanced ability to perceive and understand image content, even when image resolution parameters are poor, due to the innate visual integration and 3-D model generation capabilities of the human visual system. A mathematical model for tracking user head position and resampling the panoramic image to attain distortion free viewing of the region appropriate to the user's current head pose is presented and consideration is given to providing the user with stereo viewing generated from depth map information derived using stereo from motion algorithms.

  3. Remote viewing of objects

    International Nuclear Information System (INIS)

    Motin, J.D.; Reformatsky, I.A.; Sinitsyn, P.R.; Ivanov, N.M.; Ivanov, B.I.; Malakhov, I.K.

    1979-01-01

    An object in a nuclear power plant is viewed through a radiation-proof shield by means of an entrance lens, optic fibre bundle and exit lens. The optic fibre bundle being heated to ensure thermostabilization of its light conducting properties in the presence of ionising radiation. Heating is by an electric heating coil. Alternatively, heating may be by argon itself heated by an electric heating element, a coating of resistive heating material, or absorption of neutrons in the material of the fibres or a coating therefor. Viewing may be on a CRT screen. (author)

  4. Advance Directives

    Science.gov (United States)

    ... Types Bladder Cancer Breast Cancer Colorectal Cancer Kidney (Renal Cell) Cancer Leukemia Liver Cancer Lung Cancer Lymphoma ... about advance directives. Two well-known ones are: Aging With Dignity Aging with Dignity is a national ...

  5. Directing Creativity

    DEFF Research Database (Denmark)

    Darsø, Lotte; Ibbotson, Piers

    2008-01-01

    . Like leaders, who are caught in paradoxical situations where they have to manage production and logistics simultaneously with making space for creativity and innovation, theatre directors need to find the delicate balance between on one hand renewal of perceptions, acting and interaction......In this article we argue that leaders facing complex challenges can learn from the arts, specifically that leaders can learn by examining how theatre directors direct creativity through creative constraints. We suggest that perceiving creativity as a boundary phenomenon is helpful for directing it...... and on the other hand getting ready for the opening night. We conclude that the art of directing creativity is linked to developing competencies of conscious presence, attention and vigilance, whereas the craft of directing creativity concerns communication, framing and choice....

  6. Direct Heat

    Energy Technology Data Exchange (ETDEWEB)

    Lienau, P.J.

    1990-01-01

    Potential resources and applications of earth heat in the form of geothermal energy are large. United States direct uses amount to 2,100 MWt thermal and worldwide 8,850 MWt above a reference temperature of 35 degrees Celsius. Space and district heating are the major direct uses of geothermal energy. Equipment employed in direct use projects is of standard manufacture and includes downhole and circulation pumps, transmission and distribution pipelines, heat exchangers and convectors, heat pumps and chillers. Direct uses of earth heat discussed are space and district heating, greenhouse heating and fish farming, process and industrial applications. The economic feasibility of direct use projects is governed by site specific factors such as location of user and resource, resource quality, system load factor and load density, as well as financing. Examples are presented of district heating in Klamath Falls, and Elko. Further developments of direct uses of geothermal energy will depend on matching user needs to the resource, and improving load factors and load density.

  7. Fracture toughness of 6.4 mm (0.25 inch) Arc-Cast molybdenum and molybdenum-TZM plate at room temperature and 300 oC

    International Nuclear Information System (INIS)

    Shields, J.A. jr.; Lipetzky, P.; Mueller, A.J.

    2001-01-01

    The fracture toughness of 6.4 mm (0.25 inch) low carbon arc-cast (LCAC) molybdenum and arc-cast molybdenum-TZM alloy plate were measured at room temperature and 300 o C using compact tension specimens. The effect of crack plane orientation (longitudinal vs. transverse) and annealing practice (stress-relieved vs. recrystallized) were evaluated. Depending upon the test temperature either a standard K IC or a J-integral analysis was used to obtain the toughness value. At room temperature, regardless of alloy, orientation, or microstructure, fracture toughness values between 15 and 22 MPa m 1/2 (14 and 20 ksi in 1/2 ) were measured. These K IC values were consistent with measurements by other authors. Increasing temperature improves the toughness, due to the fact that one takes advantage of the ductile-brittle transition behavior of molybdenum. At 300 o C, the fracture toughness of recrystallized LCAC and arc-cast TZM molybdenum were also similar at approximately 64 MPa m 1/2 (58 ksi in 1/2 ). In the stress-relieved condition, however, the toughness of arc-cast TZM (91 MPa m 1/2 / 83 ksi in 1/2 ) was higher than that of the LCAC molybdenum (74 MPa m 1/2 / 67 ksi in 1/2 ). (author)

  8. MOVPE growth of GaN on 6-inch SOI-substrates: effect of substrate parameters on layer quality and strain

    Science.gov (United States)

    Lemettinen, J.; Kauppinen, C.; Rudzinski, M.; Haapalinna, A.; Tuomi, T. O.; Suihkonen, S.

    2017-04-01

    We demonstrate that higher crystalline quality, lower strain and improved electrical characteristics can be achieved in gallium nitride (GaN) epitaxy by using a silicon-on-insulator (SOI) substrate compared to a bulk silicon (Si) substrate. GaN layers were grown by metal-organic vapor phase epitaxy on 6-inch bulk Si and SOI wafers using the standard step graded AlGaN and AlN approach. The GaN layers grown on SOI exhibited lower strain according to x-ray diffraction analysis. Defect selective etching measurements suggested that the use of SOI substrate for GaN epitaxy reduces the dislocation density approximately by a factor of two. Furthermore, growth on SOI substrate allows one to use a significantly thinner AlGaN buffer compared to bulk Si. Synchrotron radiation x-ray topography analysis confirmed that the stress relief mechanism in GaN on SOI epitaxy is the formation of a dislocation network to the SOI device Si layer. In addition, the buried oxide layer significantly improves the vertical leakage characteristics as the onset of the breakdown is delayed by approximately 400 V. These results show that the GaN on the SOI platform is promising for power electronics applications.

  9. Effect of DS Concentration on the PRO Performance Using a 5-Inch Scale Cellulose Triacetate-Based Hollow Fiber Membrane Module

    Directory of Open Access Journals (Sweden)

    Masahiro Yasukawa

    2018-05-01

    Full Text Available In this study, pressure-retarded osmosis (PRO performance of a 5-inch scale cellulose triacetate (CTA-based hollow fiber (HF membrane module was evaluated under a wide range of operating conditions (0.0–6.0 MPa of applied pressure, 0.5–2.0 L/min feed solution (FS inlet flow rate, 1.0–6.0 L/min DS inlet flow rate and 0.1–0.9 M draw solution (DS concentration by using a PRO/reverse osmosis (RO hybrid system. The subsequent RO system for DS regeneration enabled the evaluation of the steady-stated module performance. In the case of pilot-scale module operation, since the DS dilution and the feed solution (FS up-concentration had occurred and was not negligible, unlike the lab-scale experiment, PRO performance strongly depended on operating conditions such as inlet flow rates of both the DS and FS concentration. To compare the module performance with different configurations, we proposed a converted parameter in which a difference of the packing density between the spiral wound (SW and the HF module was fairly considered. In the case of HF configuration, because of high packing density, volumetric-based performance was higher than that of SW module, that is, the required number of the module would be less than that of SW module in a full-scale PRO plant.

  10. Radiation Characterization Summary: ACRR Cadmium-Polyethylene (CdPoly) Bucket Located in the Central Cavity on the 32-Inch Pedestal at the Core Centerline

    Energy Technology Data Exchange (ETDEWEB)

    Parma, Edward J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Naranjo, Gerald E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kaiser, Krista Irene [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Arnold, James F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lippert, Lance L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clovis, Ralph D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Martin, Lonnie E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Quirk, Thomas J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Vehar, David W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-10-01

    This document presents the facility-recommended characterization of the neutron, prompt gamma-ray, and delayed gamma-ray radiation fields in the Annular Core Research Reactor (ACRR) for the cadmium-polyethylene (CdPoly) bucket in the central cavity on the 32-inch pedestal at the core centerline. The designation for this environment is ACRR-CdPoly-CC-32-cl. The neutron, prompt gamma-ray, and delayed gamma-ray energy spectra, uncertainties, and covariance matrices are presented as well as radial and axial neutron and gamma-ray fluence profiles within the experiment area of the bucket. Recommended constants are given to facilitate the conversion of various dosimetry readings into radiation metrics desired by experimenters. Representative pulse operations are presented with conversion examples. Acknowledgements The authors wish to thank the Annular Core Research Reactor staff and the Radiation Metrology Laboratory staff for their support of this work. Also thanks to Drew Tonigan for helping field the activation experiments in ACRR, David Samuel for helping to finalize the drawings and get the parts fabricated, and Elliot Pelfrey for preparing the active dosimetry plots.

  11. Clashing world views

    International Nuclear Information System (INIS)

    Lagassa, G.

    1992-01-01

    This article examines how politics, economics, and an increasing awareness of environmental and societal impacts are affecting the market for new hydroelectric projects. The topics of the article include border conflicts, new opposition, resettlement issues, the problems and benefits of hydroelectric projects, taking action, and a clash of world views

  12. Summary: Two Views.

    Science.gov (United States)

    Sharp, W. Harry; Hurst, James C.

    1979-01-01

    Two student services administrators present differing views on the role of consultation in the university community. These authors, speaking from one of the most inclusive levels of the university system, raise a number of issues concerning the pros and cons of intersystem consultation within the university. (Author)

  13. to view fulltext PDF

    Indian Academy of Sciences (India)

    2012-01-08

    Jan 8, 2012 ... Herein, we review recent findings supporting the view that autophagy, one of the major protein degradation systems, is critically involved in Aβ homeostasis and AD pathogenesis, and discuss possible therapeutic strategies targeting autophagic activity in alleviating the Aβ-associated pathogenesis of AD.

  14. VMware view security essentials

    CERN Document Server

    Langenhan, Daniel

    2013-01-01

    A practical and fast-paced guide that gives you all the information you need to secure your virtual environment.This book is a ""how-to"" for the novice, a ""reference guide"" for the advanced user, and a ""go to"" for the experienced user in all the aspects of VMware View desktop virtualization security.

  15. to view fulltext PDF

    Indian Academy of Sciences (India)

    Abstract. In the rapidly developing field of study of the transient sky, fast radio transients are perhaps the most exciting objects of scrutiny at present. The SKA, with its wide field-of-view and significant improve- ment in sensitivity over existing facilities, is expected to detect a plethora of fast transients which, in addition to help ...

  16. Post-human Viewing

    DEFF Research Database (Denmark)

    Blaagaard, Bolette

    2013-01-01

    This article discusses the relationship between theories of photography and mobile phone footage. In doing so, it asks if theories of photography still apply in a technologically saturated world of imagery. Technology is an increasingly important part of viewing imagery today and enables imagery...

  17. to view fulltext PDF

    Indian Academy of Sciences (India)

    IAS Admin

    cause it corresponds to what our eye or an optical instru- ment sees as brightness. You can develop an intuitive feel for the invariance of surface brightness by carry- ing out the following experiment. Stand at a distance of about a metre from a plain white wall and view it through a cone made of a rolled-up piece of paper, ...

  18. to view fulltext PDF

    Indian Academy of Sciences (India)

    Nevertheless, P1 peptidase in many ways is still a mysterious viral protein. In this review, we would like to offer a comprehensive overview, discussing the proteomic, biochemical and phylogenetic views of the P1 protein. 1. Introduction. The Potyviridae family [named after its type member,. Potato virus Y (PVY)] is the largest ...

  19. MPS views on population growth.

    Science.gov (United States)

    1997-09-01

    This article features the different views of Parliament members concerning the need in the reduction of population growth for development sustenance. Population growth would lead to environmental degradation, malnutrition, diseases, and high incidence of poverty. Furthermore, social problems arise like teenage pregnancies, and abuse of young girls. Suggestions on curtailing this problem as suggested by some of the parliament members includes educating people on issues of migration, family planning and reproductive health. Other members suggested on family planning legislation, like in the case of China where population explosion exists. Further, members thought that advocacy for population control such as condom usage targeting to couples having large families should be catered. However, this was denounced by some members as a failure and should not be sanctioned at large family couples but rather to husband with several wives. Finally, a compromised view was directed on population management with poverty alleviation involving the provision of amenities such as water, electricity, good roads, potable water, and income generating activities.

  20. TFTR vertically viewing electron cyclotron emission diagnostic

    International Nuclear Information System (INIS)

    Taylor, G.

    1990-01-01

    The Tokamak Fusion Test Reactor (TFTR) Michelson interferometer has a spectral coverage of 75--540 GHz, allowing measurement of the first four electron cyclotron harmonics. Until recently the instrument has been configured to view the TFTR plasma on the horizontal midplane, primarily in order to measure the electron temperature profile. Electron cyclotron emission (ECE) extraordinary mode spectra from TFTR Supershot plasmas exhibit a pronounced, spectrally narrow feature below the second harmonic. A similar feature is seen with the ECE radiometer diagnostic below the electron cyclotron fundamental frequency in the ordinary mode. Analysis of the ECE spectra indicates the possibility of a non-Maxwellian 40--80 keV tail on the electron distribution in or near the core. During 1990 three vertical views with silicon carbide viewing targets will be installed to provide a direct measurement of the electron energy distribution at major radii of 2.54, 2.78, and 3.09 m with an energy resolution of approximately 20% at 100 keV. To provide the maximum flexibility, the optical components for the vertical views will be remotely controlled to allow the Michelson interferometer to be reconfigured to either the midplane horizontal view or one of the three vertical views between plasma shots

  1. MISR Views Hurricane Carlotta

    Science.gov (United States)

    2000-01-01

    With winds reaching 155 mph, this year's Hurricane Carlotta became the second strongest eastern Pacific June hurricane on record. These images from MISR show the hurricane on June 21, the day of its peak intensity. The pictures are oriented so that the spacecraft's flight path is from left to right; north is at the left.The top image is a color view from MISR's vertical (nadir) camera, showing Carlotta's location in the eastern Pacific Ocean, about 500 km south of Puerto Vallarta, Mexico.The middle image is a stereoscopic 'anaglyph' created using MISR's nadir camera plus one of its aftward-viewing cameras, and shows a closer view of the area around the hurricane. Viewing with red/blue glasses (red filter over the left eye) is required to obtain a 3-D stereo effect.Near the center of the storm, the eye is about 25 km in diameter and partially obscured by a thin cloud. About 50 km to the left of the eye, the sharp drop-off from high-level to low-level cloud gives a sense of the vertical extent of the hidden eye wall. The low-level cloud is spiraling counterclockwise into the center of the cyclone. It then rises in the vicinity of the eye wall and emerges with a clockwise rotation at high altitude. Maximum surface winds are found near the eye wall.The bottom stereo image is a zoomed-in view of convective clouds in the hurricane's spiral arms. The arms are breeding grounds for severe thunderstorms, with associated heavy rain and flooding, frequent lightning, and tornadoes. Thunderstorms rise in dramatic fashion to about the same altitude as the high cloud near the hurricane's center, and are made up of individual cells that are typically less than 20 km in diameter. This image shows a number of these cells, some fairly isolated, and others connected together. Their three-dimensional structure is clearly apparent in this stereo view.MISR was built and is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Office of Earth Science, Washington, DC. The

  2. Multi-view point splatting

    OpenAIRE

    Hübner, T; Zhang, Y; Pajarola, R

    2006-01-01

    The fundamental drawback of current stereo and multi-view visualization is the necessity to perform multi pass rendering (one pass for each view) and subsequent image composition + masking for generating multiple stereo views. Thus the rendering time increases in general linearly with the number of views. In this paper we introduce a new method for multi-view splatting based on deferred blending. Our method exploits the programmability of modern graphic processing units (...

  3. Opportunity's View After Long Drive on Sol 1770

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this full-circle view of the rover's surroundings just after driving 104 meters (341 feet) on the 1,770th Martian day, or sol, of Opportunity's surface mission (January 15, 2009). Tracks from the drive extend northward across dark-toned sand ripples and light-toned patches of exposed bedrock in the Meridiani Planum region of Mars. For scale, the distance between the parallel wheel tracks is about 1 meter (about 40 inches). Prior to the Sol 1770 drive, Opportunity had driven less than a meter since Sol 1713 (November 17, 2008), while it used the tools on its robotic arm first to examine a meteorite called 'Santorini' during weeks of restricted communication while the sun was nearly in line between Mars and Earth, then to examine bedrock and soil targets near Santorini. The rover's position after the Sol 1770 drive was about 1.1 kilometer (two-thirds of a mile) south southwest of Victoria Crater. Cumulative odometry was 13.72 kilometers (8.53 miles) since landing in January 2004, including 1.94 kilometers (1.21 miles) since climbing out of Victoria Crater on the west side of the crater on Sol 1634 (August 28, 2008). This view is presented as a cylindrical projection with geometric seam correction.

  4. Opportunity's View After Long Drive on Sol 1770 (Vertical)

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this full-circle view of the rover's surroundings just after driving 104 meters (341 feet) on the 1,770th Martian day, or sol, of Opportunity's surface mission (January 15, 2009). This view is presented as a vertical projection with geometric seam correction. North is at the top. Tracks from the drive extend northward across dark-toned sand ripples and light-toned patches of exposed bedrock in the Meridiani Planum region of Mars. For scale, the distance between the parallel wheel tracks is about 1 meter (about 40 inches). Prior to the Sol 1770 drive, Opportunity had driven less than a meter since Sol 1713 (November 17, 2008), while it used the tools on its robotic arm first to examine a meteorite called 'Santorini' during weeks of restricted communication while the sun was nearly in line between Mars and Earth, then to examine bedrock and soil targets near Santorini. The rover's position after the Sol 1770 drive was about 1.1 kilometer (two-thirds of a mile) south southwest of Victoria Crater. Cumulative odometry was 13.72 kilometers (8.53 miles) since landing in January 2004, including 1.94 kilometers (1.21 miles) since climbing out of Victoria Crater on the west side of the crater on Sol 1634 (August 28, 2008).

  5. Opportunity's View After Drive on Sol 1806 (Polar)

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this full-circle view of the rover's surroundings just after driving 60.86 meters (200 feet) on the 1,806th Martian day, or sol, of Opportunity's surface mission (Feb. 21, 2009). North is at the center; south at both ends. Tracks from the drive extend northward across dark-toned sand ripples and light-toned patches of exposed bedrock in the Meridiani Planum region of Mars. For scale, the distance between the parallel wheel tracks is about 1 meter (about 40 inches). Engineers designed the Sol 1806 drive to be driven backwards as a strategy to redistribute lubricant in the rovers wheels. The right-front wheel had been showing signs of increased friction. The rover's position after the Sol 1806 drive was about 2 kilometer (1.2 miles) south southwest of Victoria Crater. Cumulative odometry was 14.74 kilometers (9.16 miles) since landing in January 2004, including 2.96 kilometers (1.84 miles) since climbing out of Victoria Crater on the west side of the crater on Sol 1634 (August 28, 2008). This view is presented as a polar projection with geometric seam correction.

  6. Opportunity's View After Long Drive on Sol 1770 (Polar)

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this full-circle view of the rover's surroundings just after driving 104 meters (341 feet) on the 1,770th Martian day, or sol, of Opportunity's surface mission (January 15, 2009). This view is presented as a polar projection with geometric seam correction. North is at the top. Tracks from the drive extend northward across dark-toned sand ripples and light-toned patches of exposed bedrock in the Meridiani Planum region of Mars. For scale, the distance between the parallel wheel tracks is about 1 meter (about 40 inches). Prior to the Sol 1770 drive, Opportunity had driven less than a meter since Sol 1713 (November 17, 2008), while it used the tools on its robotic arm first to examine a meteorite called 'Santorini' during weeks of restricted communication while the sun was nearly in line between Mars and Earth, then to examine bedrock and soil targets near Santorini. The rover's position after the Sol 1770 drive was about 1.1 kilometer (two-thirds of a mile) south southwest of Victoria Crater. Cumulative odometry was 13.72 kilometers (8.53 miles) since landing in January 2004, including 1.94 kilometers (1.21 miles) since climbing out of Victoria Crater on the west side of the crater on Sol 1634 (August 28, 2008).

  7. Opportunity's View After Drive on Sol 1806 (Vertical)

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this full-circle view of the rover's surroundings just after driving 60.86 meters (200 feet) on the 1,806th Martian day, or sol, of Opportunity's surface mission (Feb. 21, 2009). North is at the center; south at both ends. Tracks from the drive extend northward across dark-toned sand ripples and light-toned patches of exposed bedrock in the Meridiani Planum region of Mars. For scale, the distance between the parallel wheel tracks is about 1 meter (about 40 inches). Engineers designed the Sol 1806 drive to be driven backwards as a strategy to redistribute lubricant in the rovers wheels. The right-front wheel had been showing signs of increased friction. The rover's position after the Sol 1806 drive was about 2 kilometer (1.2 miles) south southwest of Victoria Crater. Cumulative odometry was 14.74 kilometers (9.16 miles) since landing in January 2004, including 2.96 kilometers (1.84 miles) since climbing out of Victoria Crater on the west side of the crater on Sol 1634 (August 28, 2008). This view is presented as a vertical projection with geometric seam correction.

  8. Concert Viewing Headphones

    Directory of Open Access Journals (Sweden)

    Kazuya Atsuta

    2011-01-01

    Full Text Available An audiovisual interface equipped with a projector, an inclina-tion sensor, and a distance sensor for zoom control has been developed that enables a user to selectively view and listen to specific performers in a video-taped group performance. Dubbed Concert Viewing Headphones, it has both image and sound processing functions. The image processing extracts the portion of the image indicated by the user and projects it free of distortion on the front and side walls. The sound processing creates imaginary microphones for those performers without one so that the user can hear the sound from any performer. Testing using images and sounds captured using a fisheye-lens camera and 37 lavalier microphones showed that sound locali-zation was fastest when an inverse square function was used for the sound mixing and that the zoom function was useful for locating the desired sound performance.

  9. Hot section viewing system

    Energy Technology Data Exchange (ETDEWEB)

    Morey, W.W.

    1984-09-01

    This report covers the development and testing of a prototype combustor viewing system. The system allows one to see and record images from the inside of an operating gas turbine combustor. The program proceeded through planned phases of conceptual design, preliminary testing to resolve problem areas, prototype design and fabrication, and rig testing. Successful tests were completed with the viewing system in the laboratory, in a high pressure combustor rig, and on a Pratt and Whitney PW20307 jet engine. Both film and video recordings were made during the tests. Digital image analysis techniques were used to enhance images and bring out special effects. The use of pulsed laser illumination was also demonstrated as a means for observing liner surfaces in the presence of luminous flame.

  10. Direct marketing

    Directory of Open Access Journals (Sweden)

    Čičić Muris

    2002-01-01

    Full Text Available Direct Marketing (DM is usually treated as unworthy activity, with actions at the edge of legality and activities minded cheating. Despite obvious problems regarding ethics and privacy threat, DM with its size, importance and role in a concept of integrated marketing communication deserves respect and sufficient analysis and review

  11. to view fulltext PDF

    Indian Academy of Sciences (India)

    IAS Admin

    centenary year of Einstein's formulation of gen- eral theory of .... Consider the plus polarisation state (see Figure 2). The distortion is maximised when one considers the distances in x and y directions. In one direction, the distance will decrease, while it will .... that we can write the expression in traditional units. We know that ...

  12. Induction Chemotherapy and Continuous Hyperfractionated Accelerated Radiotherapy (CHART) for Patients With Locally Advanced Inoperable Non-Small-Cell Lung Cancer: The MRC INCH Randomized Trial

    International Nuclear Information System (INIS)

    Hatton, Matthew; Nankivell, Matthew; Lyn, Ethan; Falk, Stephen; Pugh, Cheryl; Navani, Neal; Stephens, Richard; Parmar, Mahesh

    2011-01-01

    Purpose: Recent clinical trials and meta-analyses have shown that both CHART (continuous hyperfractionated accelerated radiation therapy) and induction chemotherapy offer a survival advantage over conventional radical radiotherapy for patients with inoperable non-small cell-lung cancer (NSCLC). This multicenter randomized controlled trial (INCH) was set up to assess the value of giving induction chemotherapy before CHART. Methods and Materials: Patients with histologically confirmed, inoperable, Stage I-III NSCLC were randomized to induction chemotherapy (ICT) (three cycles of cisplatin-based chemotherapy followed by CHART) or CHART alone. Results: Forty-six patients were randomized (23 in each treatment arm) from 9 UK centers. As a result of poor accrual, the trial was closed in December 2007. Twenty-eight patients were male, 28 had squamous cell histology, 34 were Stage IIIA or IIIB, and all baseline characteristics were well balanced between the two treatment arms. Seventeen (74%) of the 23 ICT patients completed the three cycles of chemotherapy. All 42 (22 CHART + 20 ICT) patients who received CHART completed the prescribed treatment. Median survival was 17 months in the CHART arm and 25 months in the ICT arm (hazard ratio of 0.60 [95% CI 0.31-1.16], p = 0.127). Grade 3 or 4 adverse events (mainly fatigue, dysphagia, breathlessness, and anorexia) were reported for 13 (57%) CHART and 13 (65%) ICT patients. Conclusions: This small randomized trial indicates that ICT followed by CHART is feasible and well tolerated. Despite closing early because of poor accrual, and so failing to show clear evidence of a survival benefit for the additional chemotherapy, the results suggest that CHART, and ICT before CHART, remain important options for the treatment of inoperable NSCLC and deserve further study.

  13. Direct ELISA.

    Science.gov (United States)

    Lin, Alice V

    2015-01-01

    First described by Engvall and Perlmann, the enzyme-linked immunosorbent assay (ELISA) is a rapid and sensitive method for detection and quantitation of an antigen using an enzyme-labeled antibody. Besides routine laboratory usage, ELISA has been utilized in medical field and food industry as diagnostic and quality control tools. Traditionally performed in 96-well or 384-well polystyrene plates, the technology has expanded to other platforms with increase in automation. Depending on the antigen epitope and availability of specific antibody, there are variations in ELISA setup. The four basic formats are direct, indirect, sandwich, and competitive ELISAs. Direct ELISA is the simplest format requiring an antigen and an enzyme-conjugated antibody specific to the antigen. This chapter describes the individual steps for detection of a plate-bound antigen using a horseradish peroxidase (HRP)-conjugated antibody and luminol-based enhanced chemiluminescence (ECL) substrate. The methodological approach to optimize the assay by chessboard titration is also provided.

  14. Advanced directives: open issues

    Directory of Open Access Journals (Sweden)

    Gabriella Negrini

    2013-05-01

    Full Text Available BACKGROUND In Italy Advanced directives have not been regulated by law yet. Moreover, there is a confusion of concepts: advanced directives, refusal of treatment, medical futility and euthanasia are not synonymous.DISCUSSION The following aspects are then discussed: object of directives; elapse of time between their expression and their application; knowledge of the directives and their obligatory nature. The refusal of a treatment that can save a person’s life is a critical subject. There are different ethical points of view: according to lay ethics, the patient’s self-determination prevails; the religious viewpoint, instead, says that life is a gift which we cannot dispose of. In any case, the patient will be confronted with the professional autonomy of the doctor. Should the doctor save a patient’s life in any case or should he achieve best clinical practice, in respect of his will? The doctor should interpret the patient’s will but with caution and judgment. An exemption from responsibility should be provided by law for doctors who respect patient’s living will.

  15. Viewing Age: Lifespan Identity and Television Viewing Choices.

    Science.gov (United States)

    Harwood, Jake

    1997-01-01

    Introduces a theoretical perspective on media viewing choices, grounded in social identity theory. Content analysis demonstrates that child, younger adult, and older adult television viewers show a preference for viewing characters of their own age. The experiment demonstrates that young adults' preference for viewing young adult characters exists…

  16. Summary view on demonstration reactor safety

    International Nuclear Information System (INIS)

    Satoh, Kazuziro; Kotake, Shoji; Tsukui, Yutaka; Inagaki, Tatsutoshi; Miura, Masanori

    1991-01-01

    This work presents a summary view on safety design approaches for the demonstration fast breeder reactor (DFBR). The safety objective of DFBR is to be at lea as safe as a LWR. Major safety issues discussed in this paper are; reduction of sodium void reactivity worth, adoption of self-actuated mechanism in the backup shutdown system, use of the direct reactor auxiliary cooling system (DRACS), provision of the containment system. (author)

  17. Infanticide: contrasting views.

    Science.gov (United States)

    Spinelli, M G

    2005-05-01

    The subject of infanticide is met with complex reactions. Paradoxically, the very same society that practices gender selection may also prosecute a mother for killing an infant. The author reviews historical, cultural, and political views on infanticide. Using the case of Andrea Yates, the author illustrates the outcome of an infanticide case in American Judicial System in which a floridly psychotic mother serves a life in prison. This work explores contemporary worldwide experiences of infanticide and investigates culture specific attitudes towards causes, facilitation, and punishment of this tragic cause of infant mortality. The work illustrates the intricate relationship between a society's construction of parenthood and mothering, and its experience of infanticide. Infanticide is deeply embedded in, and responsive to the societies in which it occurs. Causes vary from poverty to stigma, dowry and insanity. The worldwide experience of infant murder reaches from facilitation of gender determination in China and Asia to lethal execution of mothers as perpetrators in the United States. Infanticide must be viewed against the political, cultural, social and legal backgrounds of societies that treat women with disregard. It is a reflection of social and cultural norms governing motherhood, a constant that links these seemingly disparate acts. The overall association of infanticide with crime, postpartum illness, population and sex selection speaks to unjust discrimination against women and children. We as a world society can do a far better job of protecting motherhood.

  18. Ultrasonic viewing device

    International Nuclear Information System (INIS)

    Ito, Juro.

    1979-01-01

    Purpose: To improve the safety of reactor operation by enabling to detect the states and positions of fuel assemblies over a wide range with a set of ultrasonic viewing device comprising a rotatable ultrasonic transmitter-receiver and a reflector mounted with an adjustable angle. Constitution: A driving portion for a ultrasonic viewing device is provided to a rotary plug closing the opening of a reactor vessel and a guide pipe suspending below the coolant level is provided to the driving portion. An ultrasonic transmitter-receiver is provided at the end of the holder tube in the guide pipe. A reflector is provided at the upper position of the reactor core so as to correspond to the ultrasonic transmitter-receiver. The ultrasonic transmitter-receiver, positioned by the driving portion, performs horizontal movement for scanning the entire surface of the top of the reactor core, as well as vertical movement covering the gap between the upper mechanism on the reactor and the reactor core, whereby the confirmation for the separation of the control rod and the detection for the states of the reactor core can be conducted by the reflection waves from the reflector. (Moriyama, K.)

  19. Side-View Face Recognition

    NARCIS (Netherlands)

    Santemiz, P.; Spreeuwers, Lieuwe Jan; Veldhuis, Raymond N.J.

    2010-01-01

    Side-view face recognition is a challenging problem with many applications. Especially in real-life scenarios where the environment is uncontrolled, coping with pose variations up to side-view positions is an important task for face recognition. In this paper we discuss the use of side view face

  20. Focus-tunable multi-view holographic 3D display using a 4k LCD panel

    Science.gov (United States)

    Lin, Qiaojuan; Sang, Xinzhu; Chen, Zhidong; Yan, Binbin; Yu, Chongxiu; Wang, Peng; Dou, Wenhua; Xiao, Liquan

    2016-10-01

    A focus-tunable multi-view holographic three-dimensional (3D) display system with a 10.1 inch 4K liquid crystal device (LCD) panel is presented. In the proposed synthesizing method, computer-generated hologram (CGH) does not require calculations of light diffraction. When multiple rays pass through one point of a 3D image and enter the pupil simultaneously, the eyes can focus on the point according to the depth cue. Benefiting from the holograms, the dense multiple perspective viewpoints of the 3D object are recorded and combined into the CGH in a dense-super-view way, which make two or more rays emitted from the same point in reconstructed light field into the pupil simultaneously. In general, a wavefront is converged to a viewpoint with the amplitude distribution of multi-view images on the hologram plane, and the phase distribution of a spherical wave is converged to the viewpoint. Here, the wavefronts are calculated according to all the multi-view images and then they are summed up to obtain the object wave on the hologram plane. Moreover, the reference light (converging light) is adopted to converge the central diffraction wave from the liquid crystal display (LCD) into a common area in a short view distance. Experimental results shows that the proposed holographic display can regenerate the 3D objects with focus cues: accommodation and retinal blur.

  1. Heavy section steel technology program. Technical report No. 36. The irradiated fracture toughness of ASTM A533, Grade B, Class 1 steel measured with a four inch thick compact tension specimen

    International Nuclear Information System (INIS)

    Williams, J.A.

    1975-01-01

    The fracture toughness of an ASTM A533-B four inch thick compact tension specimen irradiated to approximately 3.8 x 10 19 n/cm 2 (E greater than 1 MeV) at 550 0 F was determined to be 80 ksi √in at a test temperature of 200 0 F. Smaller 0.394 inch thick fracture specimens were tested prior to the large specimen test to aid in establishing the test temperature and to compare the fracture transition of large and small irradiated specimens. The K/sub Ic.394/ toughness transition as measured at 100 ksi √in was observed at a temperature of 210 0 F; plate RW and WR orientations were comparable. Fracture toughness behavior of the small specimens closely predicts the large specimen behavior in the transition region. 23 references. (U.S.)

  2. The view from Kiev

    International Nuclear Information System (INIS)

    Kiselyov, S.

    1993-01-01

    This article reports the observations of correspondents for the Bulletin (two Russian journalists, one based in Moscow, the other in Kiev) who investigated the status of the Soviet Union's Black Sea Fleet and Ukraine's status as a non-nuclear-weapons state. After two years of wrangling and two earlier failed settlements, Russian President Boris Yeltsin met with Ukrainian President Leonid Kravchuk at Massandra in Crimea. On September 3, the leaders announced that Russia would buy out Ukraine's interest in the fleet and lease the port at Sevastopol. The Massandra summit was also supposed to settle Ukraine's status as a non-nuclear-weapons state. Described here are the Kiev-based correspondent's views on the Massandra summit (and its major topics), which was to have been called off by the Russian foreign ministry when Ukrainian Prime Minister Leonid Kuchma resigned

  3. to view fulltext PDF

    Indian Academy of Sciences (India)

    Across Conventional Lines. There is no way to capture the many contributions of Olah in a short essay. ... required discovering new methods of synthesis, often requiring reagents, which are difficult to obtain such .... stituents typically direct the incoming nitro group to positions or- tho (o-) or para (p-) to them. This result is in ...

  4. to view fulltext PDF

    Indian Academy of Sciences (India)

    directly touch on the development of nucleic acid therapy for anti-aging and/or longevity enhancing purposes. In light of this, the objective of this article is to overview the current understanding of the intimate association between genes and longevity, and to bring the prospect of nucleic acid therapy for lifespan prolongation ...

  5. to view fulltext PDF

    Indian Academy of Sciences (India)

    Department of Botany. Calcutta University. 35, Ballygunge Circular Road. Calcutta 700019, India. Keywords. Insectivorous plants, biodiver- sity, pitcher plants, conserva- tion. sundew, ethnomedicine. Glossary. Rosettes: rose-like cluster. Radical: springing direct from the main stem close to root. Cauline: originated from.

  6. to view fulltext PDF

    Indian Academy of Sciences (India)

    PRAKASH KUMAR

    2007-04-04

    Apr 4, 2007 ... appearance of keratinopathies, which have been shown to be the direct result of single-point mutations ..... phosphorylation: multiple sites and functional insights; Trends Biochem. Sci. ... Tong X and Coulombe P A 2006 Keratin 17 modulates hair follicle cycling in a TNFα dependent fashion; Genes Dev.

  7. to view fulltext PDF

    Indian Academy of Sciences (India)

    nanocomposites by direct in-situ polymerization. Djamal Eddine ... and Hua Zhu. 173. Analysis of P(VdCl-co-AN-co-MMA)-LiClO4-EC triblock ..... blended polymer composite films for multifunctional polymer applications. K Naveen Kumar, M Vasudeva Reddy, L Vijayalakshmi and Y C Ratnakaram. 1015. Synthesis of ...

  8. to view fulltext PDF

    Indian Academy of Sciences (India)

    Investigation of TaC–TaB2 ceramic composites. Behzad Mehdikhani, Gholam Hossein Borhani, ... Synthesis of graphene through direct decomposition of CO2 with the aid of Ni–Ce–Fe trimetallic catalyst ..... Investigations on structural disorder-induced modifications in the transport behaviour of rare-earth manganites.

  9. Ultrasonographic median nerve cross-section areas measured by 8-point 'inching test' for idiopathic carpal tunnel syndrome: a correlation of nerve conduction study severity and duration of clinical symptoms

    International Nuclear Information System (INIS)

    Chen, Shu-Fang; Lu, Cheng-Hsien; Huang, Chi-Ren; Chuang, Yao-Chung; Tsai, Nai-Wen; Chang, Chiung-Chih; Chang, Wen-Neng

    2011-01-01

    Incremental palmar stimulation of the median nerve sensory conduction at the wrist, the 'inching test', provides an assessment with reference to segments proximal and distal to the entrapment. This study used high-resolution ultrasonography (US) to measure the median nerve's cross-section areas (CSAs) like the 'inching test' and to correlate with the nerve conduction study (NCS) severity and duration of carpal tunnel syndrome (CTS). Two hundred and twelve (212) 'CTS-hands' from 135 CTS patients and 50 asymptomatic hands ('A-hands') from 25 control individuals were enrolled. The median nerve CSAs were measured at the 8-point marked as i4, i3, i2, i1, w, o1, o2, and 03 in inching test. The NCS severities were classified into six groups based on motor and sensory responses (i.e., negative, minimal, mild, moderate, severe, and extreme). Results of US studies were compared in terms of NCS severity and duration of clinical CTS symptoms. There was significantly larger CSA of the NCS negative group of 'CTS-hands' than of 'A-hands'. The cut-off values of the CSAs of the NCS negative CTS group were 12.5 mm 2 , 11.5 mm 2 and 10.1 mm 2 at the inlet, wrist crease, and outlet, respectively. Of the 212 'CTS-hands', 32 were NCS negative while 40 had minimal, 43 mild, 85 moderate, 10 severe, and two extreme NCS severities. The CSAs of 'CTS-hands' positively correlated with different NCS severities and with the duration of CTS symptoms. By duration of clinical symptoms, 12 of the 212 'CTS-hands' were in the 1 month group; 82 in >1 month and ≤12 months group, and 118 in >12 months group. In 'inching test', segments i4-i3 and i3-i2 were the most common 'positive-site'. The corresponding CSAs measured at i4 and i3, but not at i2, were significantly larger than those measured at points that were not 'positive-site'. Using the 8-point measurement of the median

  10. Ways of Viewing Pictorial Plasticity.

    Science.gov (United States)

    Wijntjes, Maarten W A

    2017-01-01

    The plastic effect is historically used to denote various forms of stereopsis. The vivid impression of depth often associated with binocular stereopsis can also be achieved in other ways, for example, using a synopter. Accounts of this go back over a hundred years. These ways of viewing all aim to diminish sensorial evidence that the picture is physically flat. Although various viewing modes have been proposed in the literature, their effects have never been compared. In the current study, we compared three viewing modes: monocular blur, synoptic viewing, and free viewing (using a placebo synopter). By designing a physical embodiment that was indistinguishable for the three experimental conditions, we kept observers naïve with respect to the differences between them; 197 observers participated in an experiment where the three viewing modes were compared by performing a rating task. Results indicate that synoptic viewing causes the largest plastic effect. Monocular blur scores lower than synoptic viewing but is still rated significantly higher than the baseline conditions. The results strengthen the idea that synoptic viewing is not due to a placebo effect. Furthermore, monocular blur has been verified for the first time as a way of experiencing the plastic effect, although the effect is smaller than synoptic viewing. We discuss the results with respect to the theoretical basis for the plastic effect. We show that current theories are not described with sufficient details to explain the differences we found.

  11. Ways of Viewing Pictorial Plasticity

    Directory of Open Access Journals (Sweden)

    Maarten W. A. Wijntjes

    2017-03-01

    Full Text Available The plastic effect is historically used to denote various forms of stereopsis. The vivid impression of depth often associated with binocular stereopsis can also be achieved in other ways, for example, using a synopter. Accounts of this go back over a hundred years. These ways of viewing all aim to diminish sensorial evidence that the picture is physically flat. Although various viewing modes have been proposed in the literature, their effects have never been compared. In the current study, we compared three viewing modes: monocular blur, synoptic viewing, and free viewing (using a placebo synopter. By designing a physical embodiment that was indistinguishable for the three experimental conditions, we kept observers naïve with respect to the differences between them; 197 observers participated in an experiment where the three viewing modes were compared by performing a rating task. Results indicate that synoptic viewing causes the largest plastic effect. Monocular blur scores lower than synoptic viewing but is still rated significantly higher than the baseline conditions. The results strengthen the idea that synoptic viewing is not due to a placebo effect. Furthermore, monocular blur has been verified for the first time as a way of experiencing the plastic effect, although the effect is smaller than synoptic viewing. We discuss the results with respect to the theoretical basis for the plastic effect. We show that current theories are not described with sufficient details to explain the differences we found.

  12. Decoupled Multicamera Sensing for Flexible View Generation

    Directory of Open Access Journals (Sweden)

    Vivek K. Singh

    2016-01-01

    Full Text Available Any sensing paradigm has three important components, namely, the actor, the sensor, and the environment. Traditionally, the sensors have been attached to either the actor or the environment. This restricts the kind of sensing that can be undertaken. We study a newer decoupled sensing paradigm, which separates the sensors from both the actor and the environment and tremendously increases the flexibility with which the scenes can be viewed. For example, instead of showing just one view, “how the environment sees the actor” or “how the actor sees the environment,” a viewer can choose to see either one or both of these views and even choose to see the scene from any desired position in any desired direction. We describe a methodology using mobile autonomous sensors to undertake such decoupled sensing and study the feasible number as well as the placement of such sensors. Also, we describe how the sensors can coordinate their movements around a moving actor so as to continue capturing the required views with minimum overall cost. The practical results obtained demonstrate the viability of the proposed approach.

  13. College science teachers' views of classroom inquiry

    Science.gov (United States)

    Brown, Patrick L.; Abell, Sandra K.; Demir, Abdulkadir; Schmidt, Francis J.

    2006-09-01

    The purposes of this study were to (a) gain an understanding of the views of inquiry held by faculty members involved in undergraduate science teaching and (b) describe the challenges, constraints, and opportunities that they perceived in designing and teaching inquiry-based laboratories. Participants included 19 college professors, representing both life and physical science disciplines, from (a) 2-year community college, (b) small, private nonprofit liberal arts college, (c) public master's granting university, and (d) public doctoral/research extensive university. We collected data through semistructured interviews and applied an iterative data analysis process. College science faculty members held a full and open inquiry view, seeing classroom inquiry as time consuming, unstructured, and student directed. They believed that inquiry was more appropriate for upper level science majors than for introductory or nonscience majors. Although faculty members valued inquiry, they perceived limitations of time, class size, student motivation, and student ability. These limitations, coupled with their view of inquiry, constrained them from implementing inquiry-based laboratories. Our proposed inquiry continuum represents a broader view of inquiry that recognizes the interaction between two dimensions of inquiry: (a) the degree of inquiry and (b) the level of student directedness, and provides for a range of inquiry-based classroom activities.

  14. Views from Space

    Science.gov (United States)

    Kitmacher, Gary H.

    2002-01-01

    aircraft like the high-flying U-2 spy planes for. Weather satellites permitted weather predictions as never before. Satellites were developed in the first ten years of the space program for earth resources and mapping. In this paper and presentation we will observe some of the best views taken in space and from space...of the Earth, and the moon and beyond. We will travel in space with our astronauts. Some of the photographs we will see are famous and others not nearly so. We will discuss some of the history behind the pictures and some of the benefits that have been gained from the views from space.

  15. 78 FR 9789 - Airworthiness Directives; Schweizer Aircraft Corporation

    Science.gov (United States)

    2013-02-12

    ... 76137. Examining the AD Docket You may examine the AD docket on the Internet at http://www.regulations... greater than 0.002-inch deep. If the bracket wear exceeds 0.002-inch deep, replace the mounting bracket... forward and aft spars for wear in the mounting attachment areas. If the wear exceeds 0.002- inch deep...

  16. Dutch radiodiagnostics viewed internationally

    International Nuclear Information System (INIS)

    Valois, J.C. de

    1990-01-01

    Dutch radiodiagnostics viewed internationally. - A quantitative description of diagnostic radiology is given in terms of radiological density (the number of radiological examinations per 1000 inhibitants), consumptions of roentgen film and contrast media. The data concerning examinations were recorded by a yearly inquiry system addressing all Dutch radiologists. The consumption of film and contrast media were derived from the data banks of the industries. In comparing these data with the data for Western Europe, Japan and the United States it is remarkable that diagnostic radiology scores lowest in regard to density, film consumption and use of contrast media. Only in the use of 35 mm cinefilm (coronary angiography) is The Netherlands number 2 on the list preceded by the United States. As a consequence radiation exposure of the population caused by diagnostic radiology is low in The Netherlands. Although the technical condition of the equipment is good due to regular and preventive service the life-span of the radiological equipment is gradually increasing beyond the limits of the normal economic depreciation. Growing arrears are found in the application of new technology: ultrasound, computer tomography and magnetic resonance imaging. The substitution of high osmolar contrast media by low osmolar media is also laggin gbehind. (author). 10 refs.; 1 fig.; 4 tab

  17. A journalist's view

    International Nuclear Information System (INIS)

    Coudret, Paul

    1989-01-01

    This paper is the result of five years of experience with the nuclear world in Switzerland (five Swiss nuclear plants) from the point of view of a journalist, who doesn't pretend to know everything; who is neither scientific nor a technical journalist, he is writing for the man in the street, and works for a daily paper i.e. has to work very fast and as close to the reality as possible. Understanding and mutual confidence between the nuclear industry and media is emphasised as essential. 'Nuclear' people are specialists and are warned about the fact that they are dealing with non-specialists, journalists and the public who would like to understand what are the processes that might affect them and do not have a dictionary of technical terminology at hand. It is pointed out that the nuclear industry should speak openly about problems and accept being criticised if they want to restore confidence with the media and with the public

  18. From 3D view to 3D print

    Science.gov (United States)

    Dima, M.; Farisato, G.; Bergomi, M.; Viotto, V.; Magrin, D.; Greggio, D.; Farinato, J.; Marafatto, L.; Ragazzoni, R.; Piazza, D.

    2014-08-01

    In the last few years 3D printing is getting more and more popular and used in many fields going from manufacturing to industrial design, architecture, medical support and aerospace. 3D printing is an evolution of bi-dimensional printing, which allows to obtain a solid object from a 3D model, realized with a 3D modelling software. The final product is obtained using an additive process, in which successive layers of material are laid down one over the other. A 3D printer allows to realize, in a simple way, very complex shapes, which would be quite difficult to be produced with dedicated conventional facilities. Thanks to the fact that the 3D printing is obtained superposing one layer to the others, it doesn't need any particular work flow and it is sufficient to simply draw the model and send it to print. Many different kinds of 3D printers exist based on the technology and material used for layer deposition. A common material used by the toner is ABS plastics, which is a light and rigid thermoplastic polymer, whose peculiar mechanical properties make it diffusely used in several fields, like pipes production and cars interiors manufacturing. I used this technology to create a 1:1 scale model of the telescope which is the hardware core of the space small mission CHEOPS (CHaracterising ExOPlanets Satellite) by ESA, which aims to characterize EXOplanets via transits observations. The telescope has a Ritchey-Chrétien configuration with a 30cm aperture and the launch is foreseen in 2017. In this paper, I present the different phases for the realization of such a model, focusing onto pros and cons of this kind of technology. For example, because of the finite printable volume (10×10×12 inches in the x, y and z directions respectively), it has been necessary to split the largest parts of the instrument in smaller components to be then reassembled and post-processed. A further issue is the resolution of the printed material, which is expressed in terms of layers

  19. BAMUD Features Demonstration by System View

    Directory of Open Access Journals (Sweden)

    D. Kocur

    2004-09-01

    Full Text Available Direct-sequence code-division multiple access (DS-CDMA is afrequently used wireless technology in DS-CDMA communications. Theconventional DS-CDMA detector follows a single-user detection strategyin which each user is detected separately without regard for the otherusers. The better strategy is multi-user detection (MUD, whereinformation about multiple users is used to improve detection of eachindividual user. This paper presents an adaptive multi-user detectorconverging (for any initialization to the minimum mean square error(MMSE detector without requiring training sequences. This blindmulti-user detector (BAMUD requires no more knowledge than does theconventional single-user detector. The structure of adaptive blinddetector is simulated by the system design tool SystemView. The aimfocus is to verify theoretical knowledge of BAMUD structure usinghardware-oriented PC-based model in SystemView.

  20. Impacts of wildlife viewing at Dixville Notch Wildlife Viewing Area

    Science.gov (United States)

    Judith K. Silverberg; Peter J. Pekins; Robert A. Robertson

    2002-01-01

    Dixville Notch Wildlife Viewing Area provided an opportunity to examine the motivations, knowledge level and attitudes of wildlife viewers as well as the response of wildlife to observation and other human caused stimuli at a designated wildlife viewing site. Using integrated social science and biological information allowed recommendations to be made for managing...

  1. Direct energy conversion

    International Nuclear Information System (INIS)

    Chalupa, Z.; Kramar, J.

    1975-01-01

    The current state of research of direct energy conversion is briefly discussed and a more detailed description is given of MHD and thermionic energy conversion. Current and prospective values of characteristic variables of various energy conversion methods are listed. MHD generators produce terminal voltage of the same order as turbogenerators while other generators for direct energy conversion only produce voltages of 0.1 to 1.5 V so that the respective elements must be parallel-connected. From the point of view of current density, thermionic conversion having the emitter surface value in the order of 10 A/cm 2 ranks first. As for MHD generators, main attention is devoted to open-cycle generators with combustion products as the working medium. It is envisaged that after 1980 MHD power plants will be commissioned having an electric output of up to 500 MW. By 1990, the construction should be started of basic MHD power plants with a total thermal efficiency of about 55%. The research of thermionic conversion focused on practical applications has mainly been concentrated on nuclear power converters. Nuclear or isotope converters have already been built and used in a number of specific applications as low-power sources, e.g., in space exploration, etc. Preparations are under way for applying high-power sources in telecommunication satellites (USSR, USA). (Z.S.)

  2. Communications and Development: Two Views.

    Science.gov (United States)

    Development Communication Report, 1977

    1977-01-01

    Two views on current international communication are presented--that of an American academician, and that of an Indian journalist. John Lent traces the rise of development journalism and development communication from the point of view of those who believe that individual freedom of expression should be treated as an inviolable right. Narinder…

  3. Wildlands management for wildlife viewing

    Science.gov (United States)

    Tamsie Cooper; William W. Shaw

    1979-01-01

    Wildlife in general and wildlife viewing in particular play significant roles in enriching the aesthetic experiences of visitors to wildlands. Effective management of wildlife for viewing must be based on human as well as biological information. The integration of the principles and techniques developed for game management with information on the human dimensions of...

  4. Behavioural View of Language Acquisition

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 13; Issue 5. Behavioural View of Language Acquisition. Rajeev Sangal. Book Review Volume 13 Issue 5 May 2008 pp 487-489. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/013/05/0487-0489 ...

  5. Viewing injustice: greater emotion heterogeneity with age.

    Science.gov (United States)

    Charles, Susan Turk

    2005-03-01

    The present study examined age differences in emotion heterogeneity, defined as the experience of co-occurring negative emotions. Younger and older European American and Mexican American participants (N=183) viewed film clips depicting scenes of injustice. Younger adults were more likely to report a single primary negative emotion, whereas older adults reported greater emotion heterogeneity, a finding consistent across gender and ethnicity. In addition, greater emotion heterogeneity was related to a greater number of life experiences. Future directions concerning the meaning of and possible implications for this age difference are discussed.

  6. Joint Integrated Air Defense Systems View (J-IADS-VIEW)

    National Research Council Canada - National Science Library

    Sutton, Mike

    2006-01-01

    ...) was developed over a two year span. J-IADS-View is an automated computer program that equips the information operations analyst with a tool to create dynamic and animated visual of foreign threat IADS information...

  7. The STAPL pView

    KAUST Repository

    Buss, Antal

    2011-01-01

    The Standard Template Adaptive Parallel Library (STAPL) is a C++ parallel programming library that provides a collection of distributed data structures (pContainers) and parallel algorithms (pAlgorithms) and a generic methodology for extending them to provide customized functionality. STAPL algorithms are written in terms of pViews, which provide a generic access interface to pContainer data by abstracting common data structure concepts. Briefly, pViews allow the same pContainer to present multiple interfaces, e.g., enabling the same pMatrix to be \\'viewed\\' (or used) as a row-major or column-major matrix, or even as a vector. In this paper, we describe the stapl pView concept and its properties. pViews generalize the iterator concept and enable parallelism by providing random access to, and an ADT for, collections of elements. We illustrate how pViews provide support for managing the tradeoff between expressivity and performance and examine the performance overhead incurred when using pViews. © 2011 Springer-Verlag Berlin Heidelberg.

  8. Advanced LabVIEW Labs

    International Nuclear Information System (INIS)

    Jones, Eric D.

    1999-01-01

    In the world of computer-based data acquisition and control, the graphical interface program LabVIEW from National Instruments is so ubiquitous that in many ways it has almost become the laboratory standard. To date, there have been approximately fifteen books concerning LabVIEW, but Professor Essick's treatise takes on a completely different tack than all of the previous discussions. In the more standard treatments of the ways and wherefores of LabVIEW such as LabVIEW Graphical Programming: Practical Applications in Instrumentation and Control by Gary W. Johnson (McGraw Hill, NY 1997), the emphasis has been instructing the reader how to program LabVIEW to create a Virtual Instrument (VI) on the computer for interfacing to a particular instruments. LabVIEW is written in ''G'' a graphical programming language developed by National Instruments. In the past the emphasis has been on training the experimenter to learn ''G''. Without going into details here, ''G'' incorporates the usual loops, arithmetic expressions, etc., found in many programming languages, but in an icon (graphical) environment. The net result being that LabVIEW contains all of the standard methods needed for interfacing to instruments, data acquisition, data analysis, graphics, and also methodology to incorporate programs written in other languages into LabVIEW. Historically, according to Professor Essick, he developed a series of experiments for an upper division laboratory course for computer-based instrumentation. His observation was that while many students had the necessary background in computer programming languages, there were students who had virtually no concept about writing a computer program let alone a computer- based interfacing program. Thus the beginnings of a concept for not only teaching computer- based instrumentation techniques, but aiso a method for the beginner to experience writing a com- puter program. Professor Essick saw LabVIEW as the ''perfect environment in which to

  9. Experts views' on Digital Competence

    NARCIS (Netherlands)

    Janssen, José; Stoyanov, Slavi

    2013-01-01

    Janssen, J., & Stoyanov, S. (2012, 20 November). Online Consultation for a Digital Competence Framework: Experts' views on Digital Competence. Workshop presentation at the Institute for Prospective Technological Studies, Seville, Spain.

  10. "Private Views" Ungaris / Katrin Kivimaa

    Index Scriptorium Estoniae

    Kivimaa, Katrin, 1969-

    1999-01-01

    Inglise ja eesti kunstnike ühisprojekt 8. augustini Dunaujvarosi Kaasaegse Kunsti Instituudis Ungaris. Kuraatorid Pam Skelton, Mare Tralla. "Private Views" ülesandeks on keskenduda ruumi mõistele naiskunstniku pilgu läbi

  11. 'Private Views' Ungaris / Katrin Kivimaa

    Index Scriptorium Estoniae

    Kivimaa, Katrin, 1969-

    1999-01-01

    Inglise js eesti kunstnike ühisprojekt 8. augustini Dunaujvarosi Kaasaegse Kunsti Instituudis Ungaris. Kuraatorid Pam Skelton, Mare Tralla. 'Private Views' ülesandeks on keskenduda ruumi mõistele naiskunstniku pilgu läbi.

  12. A broader view of justice.

    Science.gov (United States)

    Jecker, Nancy S

    2008-10-01

    In this paper I argue that a narrow view of justice dominates the bioethics literature. I urge a broader view. As bioethicists, we often conceive of justice using a medical model. This model focuses attention at a particular point in time, namely, when someone who is already sick seeks access to scarce or expensive services. A medical model asks how we can fairly distribute those services. The broader view I endorse requires looking upstream, and asking how disease and suffering came about. In contrast to a medical model, a social model of justice considers how social determinants affect the health of a population. For example, social factors such as access to clean drinking water, education, safe workplaces, and police protection, profoundly affect risk for disease and early death. I examine one important social determinant of health, health care coverage, to show the limits of a medical model and the merits of a broader view.

  13. Political view of youth voters in surabaya

    Science.gov (United States)

    Kartikasari, M. M.; Suwanda, I. M.; Adi, A. S.

    2018-01-01

    In the study of political socialization, youth voters are one of the targets of political parties in obtaining constituents. This article will reveal the views of youth voters in interpreting politics. Youth voters who are the subject of the study are college students in the first year. In general, they have different social life backgrounds but are in the same environment, the life of urban people, where their involvement with information technology is high. Political knowledge of youth voters is widely gained through mass media, where information is produced based on market needs. It encourages inconsistency in the direction of thinking that develops by voters. On the one hand, politics is seen as an activity based on ideal democratic values, but on the other hand politics is also seen as a practice that focuses on winning the battle of interests. This suggests that the youth voter political views are oriented toward superficial knowledge directed more by the mass media, not from experience gained through the process of political socialization.

  14. Ways of Viewing Pictorial Plasticity

    OpenAIRE

    Wijntjes, Maarten W. A.

    2017-01-01

    The plastic effect is historically used to denote various forms of stereopsis. The vivid impression of depth often associated with binocular stereopsis can also be achieved in other ways, for example, using a synopter. Accounts of this go back over a hundred years. These ways of viewing all aim to diminish sensorial evidence that the picture is physically flat. Although various viewing modes have been proposed in the literature, their effects have never been compared. In the current study, we...

  15. Evaluation of the GlideScope Direct: A New Video Laryngoscope for Teaching Direct Laryngoscopy

    Directory of Open Access Journals (Sweden)

    Darwin Viernes

    2012-01-01

    Full Text Available Background. Teaching direct laryngoscopy is limited by the inability of the instructor to simultaneously view the airway with the laryngoscopist. Our primary aim is to report our initial use of the GlideScope Direct, a video-enabled, Macintosh laryngoscope intended primarily as a training tool in direct laryngoscopy. Methods. The GlideScope Direct was made available to anyone who planned on performing direct laryngoscopy as the primary technique for intubation. Novices were those who had performed <30 intubations. Results. The GlideScope Direct was used 123 times as primarily a direct laryngoscope while the instructor viewed the intubation on the monitor. It was highly successful as a direct laryngoscope (93% success. Salvage by indirect laryngoscopy occurred in 7/9 remaining patients without changing equipment. Novices performed 28 intubations (overall success rate of 79%. In 6 patients, the instructor took over and successfully intubated the patient. Instructors used the video images to guide the operator in 16 (57% of those patients. Seven different instructors supervised the 28 novices, all of who subjectively felt advantaged by having the laryngoscopic view available. Conclusions. The GlideScope Direct functions similarly to a Macintosh laryngoscope and provides the instructor subjective reassurance, while providing the ability to guide the trainee laryngoscopist.

  16. Counselling From The Christian Point of View | Falaye | IFE ...

    African Journals Online (AJOL)

    This paper provides evidence that the presuppositions of the person who develops and practices counselling directly determine his theory and methods. It is the view of this author that Christian Counselling combines modern methods of counselling with Scriptural principles, using Biblical Truths as the reference point for ...

  17. Some Sports Managers' Views about Values Education through Sports

    Science.gov (United States)

    Balci, Velittin; Erdeveciler, Övünç

    2017-01-01

    The indirect aim of this study is to ensure that sports and participation in sports are seen as new tools for values education. From this indirect goal, it was aimed to analyse the views of some Amateur Sports Club managers and supporters who were supposed to directly contribute to sports and the athletes about values education. The study was…

  18. Occlusion-Aware View Interpolation

    Directory of Open Access Journals (Sweden)

    Ince Serdar

    2008-01-01

    Full Text Available Abstract View interpolation is an essential step in content preparation for multiview 3D displays, free-viewpoint video, and multiview image/video compression. It is performed by establishing a correspondence among views, followed by interpolation using the corresponding intensities. However, occlusions pose a significant challenge, especially if few input images are available. In this paper, we identify challenges related to disparity estimation and view interpolation in presence of occlusions. We then propose an occlusion-aware intermediate view interpolation algorithm that uses four input images to handle the disappearing areas. The algorithm consists of three steps. First, all pixels in view to be computed are classified in terms of their visibility in the input images. Then, disparity for each pixel is estimated from different image pairs depending on the computed visibility map. Finally, luminance/color of each pixel is adaptively interpolated from an image pair selected by its visibility label. Extensive experimental results show striking improvements in interpolated image quality over occlusion-unaware interpolation from two images and very significant gains over occlusion-aware spline-based reconstruction from four images, both on synthetic and real images. Although improvements are obvious only in the vicinity of object boundaries, this should be useful in high-quality 3D applications, such as digital 3D cinema and ultra-high resolution multiview autostereoscopic displays, where distortions at depth discontinuities are highly objectionable, especially if they vary with viewpoint change.

  19. The association of parent's outcome expectations for child TV viewing with parenting practices and child TV viewing: an examination using path analysis.

    Science.gov (United States)

    Johnson, Lauren; Chen, Tzu-An; Hughes, Sheryl O; O'Connor, Teresia M

    2015-05-28

    Television (TV) viewing has been associated with many undesirable outcomes for children, such as increased risk of obesity, but TV viewing can also have benefits. Although restrictive parenting practices are effective in reducing children's TV viewing, not all parents use them and it is currently unclear why. The current study examined parenting practices related to TV viewing in the context of social- cognitive theory. Specifically, we hypothesized that positive and negative Parental Outcome Expectations for child's TV Viewing (POETV) would be associated with social co-viewing and restrictive parenting practices, and that POETV and parenting practices influence the amount of TV viewed by child. Data were collected from an internet survey of 287 multi-ethnic parents and their 6-12 year old children on participants' sociodemographic information, parenting practices related to TV use, POETV, and parent and child TV viewing. Path analysis was used to examine the relationship amongst variables in separate models for weekday and weekend TV viewing. controlling for child age, household education, and parental TV viewing. The results provided partial support for the hypotheses, with notable differences between weekday and weekend viewing. The models explained 13.6% and 23.4% of the variance in children's TV viewing on weekdays and weekends respectively. Neither positive nor negative POETV were associated with restrictive TV parenting in either model. One subscale each from positive and negative POETV were associated with social co-viewing parenting on both weekends and weekdays in the expected direction. Restrictive parenting practices were directly negatively associated with children's TV viewing on weekdays, but not weekends. Social co-viewing parenting was directly positively associated with children's TV viewing on weekends, but not weekdays. The strongest influence on children's TV viewing was having a TV in the child's bedroom. Negative POETV was weakly associated

  20. External laryngeal manipulation done by the laryngoscopist makes the best laryngeal view for intubation.

    Science.gov (United States)

    Ali, Mohamed Shaaban; Bakri, Mohamed Hassan; Mohamed, Hesham Ali; Shehab, Hany; Al Taher, Waleed

    2014-07-01

    External laryngeal manipulation (ELM) is used to get better laryngeal view during direct laryngoscopy. This study was designed to test the hypothesis that ELM done by the intubating anesthetist (laryngoscopist) offers the best laryngeal view for tracheal intubation. A total of 160 patients underwent different surgical procedures were included in this study. Percentage of glottic opening (POGO) score and Cormack and Lehane scale were used as outcome measures for comparison between different laryngoscopic views. Four views were described; basic laryngoscopic view and then views after ELM done by the assistant, by the laryngoscopist and finally by the assistant after the guidance from the laryngoscopist respectively. The last three views compared with the basic laryngoscopic view. ELM done by the laryngoscopist or by the assistant after guidance from the laryngoscopist showed significant improvement of Cormack grades and POGO scores compared with basic laryngoscopic view. Number of patients with Cormack grade1 increased from 39 after direct laryngoscopy to 97 and 96 patients (P < 0.001 by Fisher's exact test), after ELM done by the laryngoscopist and that done by the assistant after guidance from the anesthetist respectively. Furthermore, the number of patients with POGO scores of 100% increased from 39 after direct laryngoscopy to 78 and 61 (P < 0.01) patients after ELM done by the laryngoscopist and that done by the assistant after guidance from the anesthetist respectively. It appeared from this study that ELM done by the anesthetist makes the best laryngeal view for tracheal intubation.

  1. Neural correlates of viewing paintings

    DEFF Research Database (Denmark)

    Vartanian, Oshin; Skov, Martin

    2014-01-01

    Many studies involving functional magnetic resonance imaging (fMRI) have exposed participants to paintings under varying task demands. To isolate neural systems that are activated reliably across fMRI studies in response to viewing paintings regardless of variation in task demands, a quantitative...... meta-analysis of fifteen experiments using the activation likelihood estimation (ALE) method was conducted. As predicted, viewing paintings was correlated with activation in a distributed system including the occipital lobes, temporal lobe structures in the ventral stream involved in object (fusiform...... gyrus) and scene (parahippocampal gyrus) perception, and the anterior insula-a key structure in experience of emotion. In addition, we also observed activation in the posterior cingulate cortex bilaterally-part of the brain's default network. These results suggest that viewing paintings engages not only...

  2. Different views of distance education and how these views affect ...

    African Journals Online (AJOL)

    The study investigated stakeholders' views of distance education and their implications on distance teaching and open learning at Zimbabwe Open University. The study used a descriptive survey design and questionnaire instrument. The population of the study was 14700 students, 200 administrative staff and 850 lecturers ...

  3. Students' Views on Contextual Vocabulary Teaching: A Constructivist View

    Science.gov (United States)

    Tosun, Bahadir Cahit

    2016-01-01

    The current study is a quantitative research that aims to throw light on the place of students' views on contextual vocabulary teaching in conformity with Constructivism (CVTC) in the field of foreign language teaching. Hence, the study investigates whether any significant correlation exists between the fourth year university students' attitudes…

  4. Research Directions in Anthropological Pragmatics

    Directory of Open Access Journals (Sweden)

    Piotr P. Chruszczewski

    2011-08-01

    Full Text Available Anthropological linguistics, and by default also anthropological pragmatics, grew as sub-disciplines of both anthropology and linguistics. “The intellectual basis for anthropological linguistics in the United States derives from Boas ([1911] 1966, whose interests and concerns led to the anthropological view of language, which is that language is an integral part of culture (…” (Klein 2006: 296. Pragmatics enters the scene, telling the researcher how to analyse the aforementioned phenomena. Therefore, anthropological pragmatics would be responsible for equipping the researcher with tools, for it is language and language-oriented mechanisms of communication, the study of which provides a much clearer insight into cultural phenomena which often direct the use of language representing culture from both the synchronic and the diachronic point of view. “[O]ne approaches language from an anthropological view, which includes the uses of language and the uses of silence, as well as the cultural problems involved in silence and speech” (ibid..

  5. Neural correlates of viewing paintings

    DEFF Research Database (Denmark)

    Vartanian, Oshin; Skov, Martin

    2014-01-01

    meta-analysis of fifteen experiments using the activation likelihood estimation (ALE) method was conducted. As predicted, viewing paintings was correlated with activation in a distributed system including the occipital lobes, temporal lobe structures in the ventral stream involved in object (fusiform...... gyrus) and scene (parahippocampal gyrus) perception, and the anterior insula-a key structure in experience of emotion. In addition, we also observed activation in the posterior cingulate cortex bilaterally-part of the brain's default network. These results suggest that viewing paintings engages not only...

  6. Geological-geotechnical investigation for large horizontal directional drilling

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Pedro R.R.; Rocha, Ronaldo; Avesani Neto, Jose Orlando; Placido, Rafael R.; Ignatius, Scandar G.; Galli, Vicente Luiz [Instituto de Pesquisas Tecnologicas do Estado de Sao Paulo (IPT), Sao Paulo, SP (Brazil); Amaral, Claudio S. [Centro de Pesquisa Leopoldo A. Miguez de Melo (CENPES/PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Use of Horizontal Directional Drilling - HDD for large diameter (OD>20 inches) pipeline installation started in the second half of the seventies. Since then the method became the preferred alternative for situations in which it is necessary an underground pipeline but there are concerns about digging trenches. Crossings of roadways, water bodies and environmental sensitive areas are typical examples of its application. Technical and economic feasibility of HDD depends significantly on the properties of the materials that will be drilled. Lack of information about these materials can lead to several problems as: schedule delays, cost elevation, pipeline damage, unforeseen environmental impacts and even the failure of the entire operation. Ground investigation campaigns for HDD should define a consistent geological-geotechnical model, which must include determination of behaviour parameters for soil and rock masses that will be drilled. Thus it is proposed an investigation in tree stages: review of available geological-geotechnical information, site reconnaissance, and field survey. (author)

  7. Viewing distance and eyestrain symptoms with prolonged viewing of smartphones.

    Science.gov (United States)

    Long, Jennifer; Cheung, Rene; Duong, Simon; Paynter, Rosemary; Asper, Lisa

    2017-03-01

    This paper investigates viewing distances and eyestrain symptoms in young adults reading from a smartphone for 60 minutes. A survey related to common asthenopic (eyestrain) symptoms was administered to subjects before and after they read an extract from a novel on a smartphone for 60 minutes. Subjects rated their symptoms on a scale from zero (not at all) to four (extremely). The viewing distance to the smartphone was measured on a photograph taken of the subject every minute. Each subject used the same smartphone and read the same text. Subjects were 18 young adults (mean age: 21.5 ± 3.3 years) with self-reported good health, normal visual acuity and no accommodative or binocular vision disorders. The mean viewing distance while using a smartphone over 60 minutes was 29.2 ± 7.3 cm. The viewing distance was significantly greater during the first, second and fifth 10-minute time periods (30.6 ± 7.2 cm, 29.7 ± 7.3 cm and 28.9 ± 8.5 cm, respectively) than during the final 10-minute time period (27.8 ± 7.7 cm) (Wilcoxon, p = 0.023, 0.02 and 0.04, respectively). The total symptom score was significantly greater post-experiment (score = 8.06) than pre-experiment (score = 3.56) (Wilcoxon, p smartphone use (Wilcoxon, p smartphone for 60 minutes. The viewing distances measured were closer than those previously reported in the literature. © 2016 Optometry Australia.

  8. Environmental assessment for the recycling of slightly activated copper coil windings from the 184-Inch Cyclotron at Lawrence Berkeley Laboratory, Berkeley, California

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-02

    The proposed action is to recycle slightly activated copper that is currently stored in a warehouse leased by Lawrence Berkeley Laboratory (LBL) to a scrap metal dealer. Subsequent reutilization of the copper would be unrestricted. This document addresses the potential environmental effects of recycling and reutilizing the activated copper. In addition, the potential environmental effects of possible future uses by the dealer are addressed. Direct environmental effects from the proposed action are assessed, such as air emissions from reprocessing the activated copper, as well as indirect beneficial effects, such as averting air emissions that would result from mining and smelting an equivalent quantity of copper ore. Evaluation of the human health impacts of the proposed action focuses on the pertinent issues of radiological doses and protection of workers and the public. Five alternatives to the proposed action are considered, and their associated potential impacts are addressed. The no-action alternative is the continued storage of the activated copper at the LBL warehouse. Two recycling alternatives are considered: recycling the activated copper at the Scientific Ecology Group (SEG) facility for re-use at a DOE facility and selling or giving the activated copper to a foreign government. In addition, two disposal alternatives evaluate the impacts attributable to disposing of the activated copper either at a local sanitary landfill or at the Hanford Low-Level Waste Burial Site. The proposed project and alternatives include no new construction or development of new industry.

  9. View

    African Journals Online (AJOL)

    Prof.Thoithi

    0-5 years were mainly accidental. Medicinal drug related poisoning as a result of overdose or allergic reactions were common in children aged. 0-5 years. Commuter cases refer to poisoning cases encountered while travelling, whereby patients presented with sedation and temporal amnesia. This was most likely intentional ...

  10. Results of investigations on the 0.004-scale model 74-0 of the configuration 4 (modified) space shuttle vehicle orbiter in the NASA/MSFC 14-by-14-inch trisonic wind tunnel (oa131)

    Science.gov (United States)

    Nichols, M. E.

    1975-01-01

    The results of an oil flow boundary-layer visualization wind tunnel test of an 0.004-scale model of the Space Shuttle Vehicle Orbiter in the NASA/Marshall Space Flight Center 14-by-14-inch Trisonic Wind Tunnel are presented. The model was tested at Mach numbers from 0.60 through 2.75, at angles-of-attack from 0 through 25 degrees, and at unit Reynolds numbers from 5.0 to 7.0 million per foot. The test program involved still and motion picture photography of oil-paint flow patterns on the orbiter, during and immediately after tunnel flow, to determine areas of boundary layer separation and regions of potential auxiliary power unit exhaust recirculation during transonic and low supersonic re-entry flight.

  11. Test Report for MSFC Test No. 83-2: Pressure scaled water impact test of a 12.5 inch diameter model of the Space Shuttle solid rocket booster filament wound case and external TVC PCD

    Science.gov (United States)

    1983-01-01

    Water impact tests using a 12.5 inch diameter model representing a 8.56 percent scale of the Space Shuttle Solid Rocket Booster configuration were conducted. The two primary objectives of this SRB scale model water impact test program were: 1. Obtain cavity collapse applied pressure distributions for the 8.56 percent rigid body scale model FWC pressure magnitudes as a function of full-scale initial impact conditions at vertical velocities from 65 to 85 ft/sec, horizontal velocities from 0 to 45 ft/sec, and angles from -10 to +10 degrees. 2. Obtain rigid body applied pressures on the TVC pod and aft skirt internal stiffener rings at initial impact and cavity collapse loading events. In addition, nozzle loads were measured. Full scale vertical velocities of 65 to 85 ft/sec, horizontal velocities of 0 to 45 ft/sec, and impact angles from -10 to +10 degrees simulated.

  12. Using computer graphics to design Space Station Freedom viewing

    Science.gov (United States)

    Goldsberry, Betty S.; Lippert, Buddy O.; Mckee, Sandra D.; Lewis, James L., Jr.; Mount, Francis E.

    1993-01-01

    Viewing requirements were identified early in the Space Station Freedom program for both direct viewing via windows and indirect viewing via cameras and closed-circuit television (CCTV). These requirements reside in NASA Program Definition and Requirements Document (PDRD), Section 3: Space Station Systems Requirements. Currently, analyses are addressing the feasibility of direct and indirect viewing. The goal of these analyses is to determine the optimum locations for the windows, cameras, and CCTV's in order to meet established requirements, to adequately support space station assembly, and to operate on-board equipment. PLAID, a three-dimensional computer graphics program developed at NASA JSC, was selected for use as the major tool in these analyses. PLAID provides the capability to simulate the assembly of the station as well as to examine operations as the station evolves. This program has been used successfully as a tool to analyze general viewing conditions for many Space Shuttle elements and can be used for virtually all Space Station components. Additionally, PLAID provides the ability to integrate an anthropometric scale-modeled human (representing a crew member) with interior and exterior architecture.

  13. Contemporary views on human aging and longevity

    Directory of Open Access Journals (Sweden)

    Chmielewski Piotr

    2016-06-01

    Full Text Available Aging is currently stimulating intense interest of both researchers and the general public. In developed countries, the average life expectancy has increased by roughly 30 years within the last century, and human senescence has been delayed by around a decade. Although aging is arguably the most familiar aspect of human biology, its proximate and ultimate causes have not been elucidated fully and understood yet. Nowadays there are two main approaches to the ultimate causes of aging. These are deterministic and stochastic models. The proximate theories constitute a distinct group of explanations. They focus on mechanistic causes of aging. In this view, there is no reason to believe that there is only one biological mechanism responsible for aging. The aging process is highly complex and results from an accumulation of random molecular damage. Currently, the disposable soma theory (DST, proposed by Thomas Kirkwood, is the most influential and coherent line of reasoning in biogerontology. This model does not postulate any particular mechanism underpinning somatic defense. Therefore, it is compatible with various models, including mechanistic and evolutionary explanations. Recently, however, an interesting theory of hyper-function of mTOR as a more direct cause of aging has been formulated by Mikhail Blagosklonny, offering an entirely different approach to numerous problems and paradoxes in current biogerontology. In this view, aging is quasi-programmed, which means that it is an aimless continuation of developmental growth. This mTOR-centric model allows the prediction of completely new relationships. The aim of this article is to present and compare the views of both parties in the dispute, based on the results of some recent experimental studies, and the contemporary knowledge of selected major aspects of human aging and longevity

  14. Knowledge management - a programmatic view

    International Nuclear Information System (INIS)

    Froats, J.P.S.

    2007-01-01

    This presentation give a programmatic view of knowledge management in the nuclear industry. A knowledge management program must deal with forecasting needs, acquisition, retention, training and supporting elements of culture, process, codification error prevention, information management and networks to reduce exposure

  15. Realistic Visualization of Virtual Views

    DEFF Research Database (Denmark)

    Livatino, Salvatore

    2005-01-01

    phenomena captured in the reference photographs, (i.e. the transfer of photographic-realism). An overview of most prominent approaches in realistic virtual view synthesis will be presented and briefly discussed. Applications of proposed methods to visual survey, virtual cinematography, as well as mobile...

  16. Ways of Viewing Pictorial Plasticity

    NARCIS (Netherlands)

    Wijntjes, M.W.A.

    2017-01-01

    The plastic effect is historically used to denote various forms of stereopsis. The vivid impression of depth often associated with binocular stereopsis can also be achieved in other ways, for example, using a synopter. Accounts of this go back over a hundred years. These ways of viewing all aim

  17. Students' Views on the Riots

    Science.gov (United States)

    Young, Tom; Stevenson, Kate

    2011-01-01

    Reflecting two students views on this summers riots, Tom Young locates the riots as a symptom of 20th century consumerism. Tracing the historical development of public relations and advertising with the rise of one of the 20th century's least known and most influential figures "Eddy Bernays", he asks the question--who's really to blame…

  18. Side-View Face Recognition

    NARCIS (Netherlands)

    Santemiz, P.; Spreeuwers, Lieuwe Jan; Veldhuis, Raymond N.J.; van den Biggelaar, Olivier

    As a widely used biometrics, face recognition has many advantages such as being non-intrusive, natural and passive. On the other hand, in real-life scenarios with uncontrolled environment, pose variation up to side-view positions makes face recognition a challenging work. In this paper we discuss

  19. Sublime Views and Beautiful Explanations

    DEFF Research Database (Denmark)

    Barry, Daved; Meisiek, Stefan; Hatch, Mary Jo

    To create a generative theory that provides beautiful explanations and sublime views requires both a crafts and an art approach to scientific theorizing. The search for generativity leads scholars to perform various theorizing moves between the confines of simple, yet eloquent beauty...

  20. Learning to Discriminate Face Views

    Directory of Open Access Journals (Sweden)

    Fang Fang

    2011-05-01

    Full Text Available Although visual feature leaning has been well studied, we still know little about the mechanisms of perceptual learning of complex object. Here, human perceptual learning in discrimination of in-depth orientation of face view was studied using psychophysics, EEG and fMRI. We trained subjects to discriminate face orientations around a face view (i.e. 30° over eight daily sessions, which resulted in a significant improvement in sensitivity to the face view orientation. This improved sensitivity was highly specific to the trained orientation and persisted up to six months. Different from perceptual learning of simple visual features, this orientation-specific learning effect could completely transfer across changes in face size, visual field and face identity. A complete transfer also occurred between two partial face images that were mutually exclusive but constituted a complete face. However, the transfer of the learning effect between upright and inverted faces and between a face and a paperclip object was very weak. Before and after training, we measured EEG and fMRI BOLD signals responding to both the trained and the untrained face views. Analyses of ERPs and induced gamma activity showed that face view discrimination training led to a larger reduction of N170 latency at the left occipital-temporal area and a concurrent larger decrease of induced gamma activity at the left frontal area with the trained face view, compared with the untrained ones. BOLD signal amplitude and MVPA analyses showed that, in face-selective cortical areas, training did not lead to a significant amplitude change, but induced a more reliable spatial pattern of neural activity in the left FFA. These results suggest that the visual system had learned how to compute face orientation from face configural information more accurately and that a large amount of plastic changes took place at a level of higher visual processing where size-, location-, and identity

  1. The public view of Pacific Northwest forests

    International Nuclear Information System (INIS)

    West, P.R.

    1991-01-01

    There are diverse communities that make up the public in the Pacific Northwest, all with differing views on the forest. To the media, the public are those indirect stakeholders, or average citizens, who have become keenly aware of the importance of environmental issues, including the implications for global change. Linkages between the forests, deforestation, global climate change, and overall environmental sustainability have been widely publicized, though less frequently analyzed in depth. Consequently, the state of Northwest forests has become a vital public interest. The need for an overall margin of global environmental security, and a concern over unsuspected consequences of all economic activity (including forestry) have created a community of interest among the urban population. In part, this is a spillover effect from promoting individual environmental responsibility and the conserver ethic into issues beyond the city boundary. In the Northwest, this often translates as a deep concern over forest management issues and strong conviction that changes are needed. At the same time, and largely as a direct response, the socioeconomic interests of rural forest communities have become a high-profile issue, raising debate over local empowerment and local forest stewardship models. The consequences of this complex and rapidly evolving public view of the forests are critical to forest managers and policymakers. 12 refs

  2. A wide field of view plasma spectrometer

    Science.gov (United States)

    Skoug, R. M.; Funsten, H. O.; Möbius, E.; Harper, R. W.; Kihara, K. H.; Bower, J. S.

    2016-07-01

    We present a fundamentally new type of space plasma spectrometer, the wide field of view plasma spectrometer, whose field of view is > 1.25π ster using fewer resources than traditional methods. The enabling component is analogous to a pinhole camera with an electrostatic energy-angle filter at the image plane. Particle energy-per-charge is selected with a tunable bias voltage applied to the filter plate relative to the pinhole aperture plate. For a given bias voltage, charged particles from different directions are focused by different angles to different locations. Particles with appropriate locations and angles can transit the filter plate and are measured using a microchannel plate detector with a position-sensitive anode. Full energy and angle coverage are obtained using a single high-voltage power supply, resulting in considerable resource savings and allowing measurements at fast timescales. We present laboratory prototype measurements and simulations demonstrating the instrument concept and discuss optimizations of the instrument design for application to space measurements.

  3. Exploded view diagrams of mathematical surfaces

    KAUST Repository

    Karpenko, Olga A.

    2010-11-01

    We present a technique for visualizing complicated mathematical surfaces that is inspired by hand-designed topological illustrations. Our approach generates exploded views that expose the internal structure of such a surface by partitioning it into parallel slices, which are separated from each other along a single linear explosion axis. Our contributions include a set of simple, prescriptive design rules for choosing an explosion axis and placing cutting planes, as well as automatic algorithms for applying these rules. First we analyze the input shape to select the explosion axis based on the detected rotational and reflective symmetries of the input model. We then partition the shape into slices that are designed to help viewers better understand how the shape of the surface and its cross-sections vary along the explosion axis. Our algorithms work directly on triangle meshes, and do not depend on any specific parameterization of the surface. We generate exploded views for a variety of mathematical surfaces using our system. © 2006 IEEE.

  4. A study on the cochlear view in multichannel cochlear implantees

    Energy Technology Data Exchange (ETDEWEB)

    Kweon, Dae Cheol; Kim, Jeong Hee; Kim, Seong Lyong; Kim, Hae Seong; Lee, Yong Woo [College of Medicine, Seoul National Univ., Seoul (Korea, Republic of)

    1999-04-01

    Cochlear implant poses a contraindication to the magnetic resonance imaging(MRI) process, because MRI generates artifacts, inducing an electrical current and causing device magnetization. CT is relatively expensive and the metal electrodes scatter the image. Post-implantation radiological studies using anterior-posterior transorbital, submental-vertex and lateral views, the intracochlear electrodes are not well displayed. Therefore, the authors developed a special view, which we call the cochlear view. The patient is sitting in front of a vertical device. Then the midsagittal plane is adjusted to form an angle of 15 .deg. , 30 .deg. , and 45 .deg. with the film. The flexion of the neck is adjusted to make the infraorbitomeatal line(IOML) is parallel with the transverse axis of the film. The central ray is directed to exit from the skull at point which is 3.0 cm anterior and 2.0 cm superior to the EAM(external auditory meatus). Results have shown that single radiography of the cochlear view provides sufficient information to demonstrate the position of the electrodes array and the depth of insertion in cochlear. Radiography of the cochlear view in angle of 45 .deg. is an excellent image. The cochlear view gives the greatest amount of medical information with the least radiation and lowest medical cost. It can be widely used in all cochlear implant clinics.

  5. Suggestion of Modified Y-View in Supine Position

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Seong Gyu [Dept. of Radiology, Dong A University Medicine Center, Busan (Korea, Republic of); Baek, Seong Min [Dept. of Nuclear Medicine, Kosin University Gospel Hospital, Busan (Korea, Republic of); Lee, Hyo Yeong [Dept. of Nuclear Medicine, Pusan National University Hospital, Busan (Korea, Republic of)

    2012-06-15

    This study was performed to design a modified Y-View as an imaging method for the Y-View in supine position for patients who requires Y-View imaging for the diagnosis of shoulder impingement syndrome but having trouble for the positioning of patients complaining of shoulder pain. On the result of comparative analysis of the images obtained by changing the lateral-medio degree of X-ray tube into 35 degrees, 40 degrees, and 45 degrees while patient is in supine position, 40 degrees of X-ray tube in lateral-medio direction produced the most valuable image for the diagnosis by best describing the shapes of acromion, clavicle space, and coracoacromial arch. Therefore, patients who have difficulty in Y-View position to obtain Y-View image, modified Y-View can be applied as a useful alternative method. By this study, various applications not only in shoulder impingement syndrome but also in diverse omarthralgia diseases are expected.

  6. Time for a Change; Spirit's View on Sol 1843 (Stereo)

    Science.gov (United States)

    2009-01-01

    [figure removed for brevity, see original site] Left-eye view of a color stereo pair for PIA11973 [figure removed for brevity, see original site] Right-eye view of a color stereo pair for PIA11973 NASA's Mars Exploration Rover Spirit used its navigation camera to take the images that have been combined into this stereo, full-circle view of the rover's surroundings during the 1,843rd Martian day, or sol, of Spirit's surface mission (March 10, 2009). South is in the middle. North is at both ends. This view combines images from the left-eye and right-eye sides of the navigation camera. It appears three-dimensional when viewed through red-blue glasses with the red lens on the left. The rover had driven 36 centimeters downhill earlier on Sol 1854, but had not been able to get free of ruts in soft material that had become an obstacle to getting around the northeastern corner of the low plateau called 'Home Plate.' The Sol 1854 drive, following two others in the preceding four sols that also achieved little progress in the soft ground, prompted the rover team to switch to a plan of getting around Home Plate counterclockwise, instead of clockwise. The drive direction in subsequent sols was westward past the northern edge of Home Plate. This view is presented as a cylindrical-perspective projection with geometric seam correction.

  7. Suggestion of Modified Y-View in Supine Position

    International Nuclear Information System (INIS)

    Shin, Seong Gyu; Baek, Seong Min; Lee, Hyo Yeong

    2012-01-01

    This study was performed to design a modified Y-View as an imaging method for the Y-View in supine position for patients who requires Y-View imaging for the diagnosis of shoulder impingement syndrome but having trouble for the positioning of patients complaining of shoulder pain. On the result of comparative analysis of the images obtained by changing the lateral-medio degree of X-ray tube into 35 degrees, 40 degrees, and 45 degrees while patient is in supine position, 40 degrees of X-ray tube in lateral-medio direction produced the most valuable image for the diagnosis by best describing the shapes of acromion, clavicle space, and coracoacromial arch. Therefore, patients who have difficulty in Y-View position to obtain Y-View image, modified Y-View can be applied as a useful alternative method. By this study, various applications not only in shoulder impingement syndrome but also in diverse omarthralgia diseases are expected.

  8. Automatic creation of LabVIEW network shared variables

    International Nuclear Information System (INIS)

    Kluge, T.; Schroeder, H.

    2012-01-01

    We are in the process of preparing the LabVIEW controlled system components of our Solid State Direct Drive experiments for the integration into a Supervisory Control And Data Acquisition (SCADA) or distributed control system. The predetermined route to this is the generation of LabVIEW network shared variables that can easily be exported by LabVIEW to the SCADA system using OLE for Process Control (OPC) or other means. Many repetitive tasks are associated with the creation of the shared variables and the required code. We are introducing an efficient and inexpensive procedure that automatically creates shared variable libraries and sets default values for the shared variables. Furthermore, LabVIEW controls are created that are used for managing the connection to the shared variable inside the LabVIEW code operating on the shared variables. The procedure takes as input an XML spread-sheet defining the required input. The procedure utilizes XSLT and LabVIEW scripting. In a later state of the project the code generation can be expanded to also create code and configuration files that will become necessary in order to access the shared variables from the SCADA system of choice. (authors)

  9. Large-area nanoimprinting on various substrates by reconfigurable maskless laser direct writing

    KAUST Repository

    Lee, Daeho

    2012-08-10

    Laser-assisted, one-step direct nanoimprinting of metal and semiconductor nanoparticles (NPs) was investigated to fabricate submicron structures including mesh, line, nanopillar and nanowire arrays. Master molds were fabricated with high-speed (200mms 1) laser direct writing (LDW) of negative or positive photoresists on Si wafers. The fabrication was completely free of lift-off or reactive ion etching processes. Polydimethylsiloxane (PDMS) stamps fabricated from master molds replicated nanoscale structures (down to 200nm) with no or negligible residual layers on various substrates. The low temperature and pressure used for nanoimprinting enabled direct nanofabrication on flexible substrates. With the aid of high-speed LDW, wafer scale 4inch direct nanoimprinting was demonstrated. © 2012 IOP Publishing Ltd.

  10. The clinical microscope and direct composite veneer

    DEFF Research Database (Denmark)

    Pascotto, Renata C; Benetti, Ana Raquel

    2010-01-01

    This paper presents the advantages and limitations related to the use of a clinical microscope in restorative dentistry, and it demonstrates the aid of magnification during preparation and restoration of a direct composite veneer. Good illumination and visibility is important to adequately viewin...... the adjacent dental tissues so that the resin composite buildup can mimic natural teeth. The reproduction of details results in a naturally esthetic direct veneer.......This paper presents the advantages and limitations related to the use of a clinical microscope in restorative dentistry, and it demonstrates the aid of magnification during preparation and restoration of a direct composite veneer. Good illumination and visibility is important to adequately viewing...

  11. The hysterographic (empty bladder) view of the uterus

    International Nuclear Information System (INIS)

    Carroll, R.; Gombergh, R.

    1986-01-01

    Technical improvements in transducer design permit a direct coronal view of the uterus (''hysterographic view'') to be obtained with the bladder empty as a valuable complement to the usual US study of the pelvis with the bladder distended. Good visualization of the uterine cavity and wall is possible in 95% of cases. More than 50 cases of endometrial and myometrial pathology (polyps, cancers, submucous fibroids) with abnormalities inapparent on standard US scans have hysterographic and/or pathologic proof confirming the empty-bladder US-based diagnosis. If tubal visualization is not necessary, empty-bladder US may often avoid hysterography. It is also the best way to demonstrate IUD position

  12. QlikView Server and Publisher

    CERN Document Server

    Redmond, Stephen

    2014-01-01

    This is a comprehensive guide with a step-by-step approach that enables you to host and manage servers using QlikView Server and QlikView Publisher.If you are a server administrator wanting to learn about how to deploy QlikView Server for server management,analysis and testing, and QlikView Publisher for publishing of business content then this is the perfect book for you. No prior experience with QlikView is expected.

  13. First 3D view of solar eruptions

    Science.gov (United States)

    2004-07-01

    CME as seen by LASCO Figure 1. A classical three-part CME inside the LASCO C3 field of view, showing a bright frontal loop (shaped like a lightbulb)surrounding a dark cavity with a bright core. This CME is headed roughly 90 degrees away from Earth. The uniform disk in the centre of the image is where the occulter is placed, blocking out all direct sunlight. The approximate size of the Sun is indicated by the white circle in the middle. Click here CME as seen by LASCO Figure 2. A similar CME heading almost directly towards Earth, observed by LASCO C2 which has a smaller field of view than C3. The size of the Sun is indicated by the larger circle, and the x-marked circle on the Sun shows the origin of the CME. Panel a shows the total intensity (darker means more intensity) as imaged directly by LASCO. Only the narrow lower end of the 'lightbulb' shape is visible - the widest portion has expanded beyond the field of view, whereas the front part and the core are too dim to be seen or hidden behind the occulter. Panel d is a topographic map of the material shown in panel a. The distance from the plane of the Sun to the material is colour coded - the scale in units of solar radii is shown on the side. Panels b and c show the intensity as it would have appeared to an observer positioned to the side of the Sun or directly above it, respectively. Click here CMEs are the most powerful eruptions in the Solar System, with thousands of millions of tonnes of electrified gas being blasted from the Sun's atmosphere into space at millions of kilometres per hour. Researchers believe that CMEs are launched when solar magnetic fields become strained and suddenly 'snap' to a new configuration, like a rubber band that has been twisted to the breaking point. To fully understand the origin of these powerful blasts and the process that launches them from the Sun, scientists need to see the structure of CMEs in three dimensions. "Views in three dimensions will help us to better predict CME

  14. Views of the solar system

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, C.

    1995-02-01

    Views of the Solar System has been created as an educational tour of the solar system. It contains images and information about the Sun, planets, moons, asteroids and comets found within the solar system. The image processing for many of the images was done by the author. This tour uses hypertext to allow space travel by simply clicking on a desired planet. This causes information and images about the planet to appear on screen. While on a planet page, hyperlinks travel to pages about the moons and other relevant available resources. Unusual terms are linked to and defined in the Glossary page. Statistical information of the planets and satellites can be browsed through lists sorted by name, radius and distance. History of Space Exploration contains information about rocket history, early astronauts, space missions, spacecraft and detailed chronology tables of space exploration. The Table of Contents page has links to all of the various pages within Views Of the Solar System.

  15. For current viewing resistor loads

    Science.gov (United States)

    Lyons, Gregory R [Tijeras, NM; Hass, Jay B [Lee's Summit, MO

    2011-04-19

    The invention comprises a terminal unit for a flat cable comprising a BNC-PCB connector having a pin for electrically contacting one or more conducting elements of a flat cable, and a current viewing resistor having an opening through which the pin extends and having a resistor face that abuts a connector face of the BNC-PCB connector, wherein the device is a terminal unit for the flat cable.

  16. A Russian View on Landpower

    Science.gov (United States)

    2015-04-01

    Many of these seem innocuous or improbable—but it must be remembered that they will be interpreted in Mos- cow in accordance with a Russian view of the...money, weapons, and political protec- tion in the United Nations (UN). In Ukraine, Mos- cow startled the world by moving mass amounts of its land forces...complete information picture of the battlefield is formed for the appropriate commanders in real time, as the command and con- trol cycle is

  17. The SPHERE View of Betelgeuse

    Science.gov (United States)

    Chesneau, O.; Schmid, H.-M.; Carbillet, M.; Chiavassa, A.; Abe, L.; Mouillet, D.

    2013-05-01

    SPHERE, the Spectro-Polarimetric High-contrast Exoplanet REsearch instrument for the VLT is optimized towards reaching the highest contrast in a limited field of view and at short distances from the central star, thanks to an extreme AO system. SPHERE is very well suited to study the close environment of Betelgeuse, and has a strong potential for detecting the ejection activity around this key red supergiant.

  18. A view from both sides.

    Science.gov (United States)

    Featherstone, John D B

    2011-07-01

    This letter to the editor is from one of the key figures in caries management by risk assessment. Dr. Featherstone brings a unique perspective to the access issue. He grew up in New Zealand and experienced care under the dental therapist provider model. His letter is included here because it complements the other articles by providing his views on CAMBRA in the context of addressing barriers to care.

  19. QlikView-raportointisovelluksen luominen

    OpenAIRE

    Mella, Marko

    2016-01-01

    Tämän toiminnallisen opinnäytetyön tavoitteena on rakentaa raportointisovellus kohdeorganisaatiolle. Tuloksena syntynyt sovellus tulee olemaan organisaation asiantuntijoiden jatkuvassa käytössä. Sovellus nopeuttaa huomattavasti asiantuntijoiden tiedonkeruuta tarvitsemistaan asioista. Opinnäytetyöni toimeksiantaja käyttää QlikView-raportointisovellusta Business Intelligence raportointityökalunaan. Raportointisovellusta lähdettiin tekemään eri tavalla kuin olisi tarkoitus. Riskejä oli paljo...

  20. Implementation of the directive 2013/59 EURATOM from the view of a federal state authority - new challenges for the federal state authorities in the frame of the federal executive administration; Umsetzung der Richtlinie 2013/59 EURATOM aus Sicht einer Landesbehoerde. Neue Herausforderungen fuer die Landesbehoerde im Rahmen der Bundesauftragsverwaltung im Strahlenschutz

    Energy Technology Data Exchange (ETDEWEB)

    Lorenz, J. [Saechsisches Staatsministerium fuer Umwelt und Landwirtschaft, Dresden (Germany). Referat Strahlenschutz, Gentechnik und Chemikalien; Honolka, J. [Saechsisches Landesamt fuer Umwelt, Landwirtschaft und Geologie, Dresden (Germany). Referat Strahlenschutz

    2016-07-01

    The directive 2013/59 EURATOM must be implemented in Germany by the Federal Environment Ministry until 2018. The implementation is to modernize the law in the field of the Radiation Protection in Germany. New assignments are coming to the Saxon authorities. The implementation of Article 63 in the field of medicine will be described in more detail and the problems for the authorities in Saxony are discussed. The new tasks require additional staff.

  1. Directional Darwinian Selection in proteins.

    Science.gov (United States)

    McClellan, David A

    2013-01-01

    Molecular evolution is a very active field of research, with several complementary approaches, including dN/dS, HON90, MM01, and others. Each has documented strengths and weaknesses, and no one approach provides a clear picture of how natural selection works at the molecular level. The purpose of this work is to present a simple new method that uses quantitative amino acid properties to identify and characterize directional selection in proteins. Inferred amino acid replacements are viewed through the prism of a single physicochemical property to determine the amount and direction of change caused by each replacement. This allows the calculation of the probability that the mean change in the single property associated with the amino acid replacements is equal to zero (H0: μ = 0; i.e., no net change) using a simple two-tailed t-test. Example data from calanoid and cyclopoid copepod cytochrome oxidase subunit I sequence pairs are presented to demonstrate how directional selection may be linked to major shifts in adaptive zones, and that convergent evolution at the whole organism level may be the result of convergent protein adaptations. Rather than replace previous methods, this new method further complements existing methods to provide a holistic glimpse of how natural selection shapes protein structure and function over evolutionary time.

  2. Optimization of sharp and viewing-angle-independent structural color.

    Science.gov (United States)

    Hsu, Chia Wei; Miller, Owen D; Johnson, Steven G; Soljačić, Marin

    2015-04-06

    Structural coloration produces some of the most brilliant colors in nature and has many applications. Motivated by the recently proposed transparent displays that are based on wavelength-selective scattering, here we consider the new problem of transparent structural color, where objects are transparent under omnidirectional broad-band illumination but scatter strongly with a directional narrow-band light source. Transparent structural color requires two competing properties, narrow bandwidth and broad viewing angle, that have not been demonstrated simultaneously previously. Here, we use numerical optimization to discover geometries where a sharp 7% bandwidth in scattering is achieved, yet the peak wavelength varies less than 1%, and the peak height and peak width vary less than 6% over broad viewing angles (0-90°) under a directional illumination. Our model system consists of dipole scatterers arranged into several rings; interference among the scattered waves is optimized to yield the wavelength-selective and angle-insensitive response.

  3. Enhanced Choice for Viewing Cocaine Pictures in Cocaine Addiction

    International Nuclear Information System (INIS)

    Moeller, S.J.; Goldstein, R.; Moeller, S.J.; Maloney, T.; Parvaz, M.A.; Dunning, J.P.; Alia-Klein, N.; Woicik, P.A.; Hajcak, G.; Telang, F.; Wang, G.-J.; Volkow, N.D.; Goldstein, R.Z.

    2009-01-01

    Individuals with cocaine use disorder (CUD) chose cocaine over nondrug rewards. In two newly designed laboratory tasks with pictures, we document this modified choice outside of a cocaine administration paradigm. Choice for viewing cocaine, pleasant, unpleasant, or neutral pictures-under explicit contingencies (choice made between two fully visible side-by-side images) and under more implicit contingencies (selections made between pictures hidden under flipped-over cards)-was examined in 20 CUD and 20 matched healthy control subjects. Subjects also provided self-reported ratings of each picture's pleasantness and arousal. Under both contingencies, CUD subjects chose to view more cocaine pictures than control subjects, group differences that were not fully explained by the self-reported picture ratings. Furthermore, whereas CUD subjects choice for viewing cocaine pictures exceeded choice for viewing unpleasant pictures (but did not exceed choice for viewing pleasant pictures, in contrast to their self-reported ratings), healthy control subjects avoided viewing cocaine pictures as frequently as, or even more than, unpleasant pictures. Finally, CUD subjects with the most cocaine viewing selections, even when directly compared with selections of the pleasant pictures, also reported the most frequent recent cocaine use. Enhanced drug-related choice in cocaine addiction can be demonstrated even for nonpharmacologic (pictorial) stimuli. This choice, which is modulated by alternative stimuli, partly transcends self-reports (possibly indicative of a disconnect in cocaine addiction between self-reports and objective behavior) to provide an objective marker of addiction severity. Neuroimaging studies are needed to establish the neural underpinnings of such enhanced cocaine-related choice.

  4. Enhanced Choice for Viewing Cocaine Pictures in Cocaine Addiction

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, S.J.; Goldstein, R.; Moeller, S.J.; Maloney, T. Parvaz, M.A.; Dunning, J.P.; Alia-Klein, N.; Woicik, P.A.; Hajcak, G.; Telang, F.; Wang, G.-J.; Volkow, N.D.; Goldstein, R.Z.

    2009-02-01

    Individuals with cocaine use disorder (CUD) chose cocaine over nondrug rewards. In two newly designed laboratory tasks with pictures, we document this modified choice outside of a cocaine administration paradigm. Choice for viewing cocaine, pleasant, unpleasant, or neutral pictures-under explicit contingencies (choice made between two fully visible side-by-side images) and under more implicit contingencies (selections made between pictures hidden under flipped-over cards)-was examined in 20 CUD and 20 matched healthy control subjects. Subjects also provided self-reported ratings of each picture's pleasantness and arousal. Under both contingencies, CUD subjects chose to view more cocaine pictures than control subjects, group differences that were not fully explained by the self-reported picture ratings. Furthermore, whereas CUD subjects choice for viewing cocaine pictures exceeded choice for viewing unpleasant pictures (but did not exceed choice for viewing pleasant pictures, in contrast to their self-reported ratings), healthy control subjects avoided viewing cocaine pictures as frequently as, or even more than, unpleasant pictures. Finally, CUD subjects with the most cocaine viewing selections, even when directly compared with selections of the pleasant pictures, also reported the most frequent recent cocaine use. Enhanced drug-related choice in cocaine addiction can be demonstrated even for nonpharmacologic (pictorial) stimuli. This choice, which is modulated by alternative stimuli, partly transcends self-reports (possibly indicative of a disconnect in cocaine addiction between self-reports and objective behavior) to provide an objective marker of addiction severity. Neuroimaging studies are needed to establish the neural underpinnings of such enhanced cocaine-related choice.

  5. Differing professional views or opinions: 1994 Special Review Panel

    International Nuclear Information System (INIS)

    1996-09-01

    In July 1994, the Executive Director for Operations of the US Nuclear Regulatory Commission (NRC) appointed a Special Review Panel to assess the Differing Professional View or Opinion (DPV/DPO) process, including its effectiveness, how well it is understood by employees, and the organizational climate for having such views aired and properly decided. An additional area within this review was to address the effectiveness of the DPO procedures as they pertain to public access and confidentiality. Further, the Panel was charged with the review of the submittals completed since the last review to identify employees who made significant contributions to the agency or to the public health and safety but had not been adequately recognized for this contribution. The report presents the Special Review Panel's evaluation of the NRC's current process for dealing with Differing Professional Views or Opinions. Provided in this report are the results of an employee opinion survey on the process; highlights and suggestions from interviews with individuals who had submitted a Differing Professional View or Opinion, as well as with agency managers directly involved with the Differing Professional Views or Opinions process; and the Special Review Panel's recommendations for improving the DPV/DPO process

  6. Document delivery services contrasting views

    CERN Document Server

    1999-01-01

    Design and maintain document delivery services that are ideal for academic patrons! In Document Delivery Services: Contrasting Views, you'll visit four university library systems to discover the considerations and challenges each library faced in bringing document delivery to its clientele. This book examines the questions about document delivery that are most pressing in the profession of library science. Despite their own unique experiences, you'll find common practices among all four?including planning, implementation of service, and evaluation of either user satisfaction and/or vendor per

  7. Does Everyday Corruption Affect How Russians View their Political Leadership

    Science.gov (United States)

    2016-02-22

    so, in what direction? In addressing this question, we focus specifically on small- scale corruption, such as bribery exchanges in everyday...parents have a positive view of bribery as it allows them to navigate the inflexible higher educational system, receive the treatment that they want, and...avoid the burdensome requirements of an outdated curriculum. She also describes similar attitudes among Belarusian parents in relation to bribery in

  8. A duality view of spectral methods for dimensionality reduction

    OpenAIRE

    Xiao, Lin; Sun, Jun; Boyd, Stephen

    2006-01-01

    We present a unified duality view of several recently emerged spectral methods for nonlinear dimensionality reduction, including Isomap, locally linear embedding, Laplacian eigenmaps, and maximum variance unfolding. We discuss the duality theory for the maximum variance unfolding problem, and show that other methods are directly related to either its primal formulation or its dual formulation, or can be interpreted from the optimality conditions. This duality framework reveals close connectio...

  9. Ricardo’s Work as Viewed by Later Economists

    Science.gov (United States)

    1988-08-01

    realism of his theories, par- ticularly with regard to population pressure.i Samuel Bailey did not think much of his logical powers. John Stuart Mill... neoclassical theory. Karl Marx, like Mill, put Ricardo in the highest rank, yet used his theories for directions copy NiSPECTO totally antithetical to...any view Ricardo might have held. The neoclassical 6 *This work was supported by Office of Naval Research Grant N00014-86-K- 0216 at the Institute

  10. Testresults KROHNE 8-inch ultrasonic flowmeter

    Energy Technology Data Exchange (ETDEWEB)

    Boer, A.H.; Volmer, W.

    1997-07-01

    A new development in the field of ultrasonic liquid flowmeasurements has been achieved with the multichannel liquid ultrasonic flowmeter; the first for use in maintenance-free custody transfer applications. Although ultrasonic flowmeters are used for applications in the oil industry for many years, this new development will have a big impact on custody transfer flow measurement. Not only because of the compactness, but also because of the low investment and operating cost of this flowmeter. This paper describes the system and the method of operation as well as practical experiences and achieved test results of this flowmeter. (author)

  11. Six-Inch Shock Tube Characterization

    Science.gov (United States)

    2016-12-09

    with compressed air separated from the rest of the tube by a frangible diaphragm and rupturing that diaphragm. On command, a mechanical knife ruptures...ruptured. The cylinder pressure decreased by 5 psi for subsequent sets of shots until the membrane no longer ruptured. The characterization fired five... shots for each of the Mylar® and pressure configurations: 92A at 5 to 10 psi; 200A at 5 to 22 psi; 200S at 5 to 15 psi; 500A at 40 to 80 psi; 1000A at

  12. A dual-view digital tomosynthesis imaging technique for improved chest imaging

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, Yuncheng; Lai, Chao-Jen; Wang, Tianpeng; Shaw, Chris C., E-mail: cshaw@mdanderson.org [Department of Imaging Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77054 (United States)

    2015-09-15

    Purpose: Digital tomosynthesis (DTS) has been shown to be useful for reducing the overlapping of abnormalities with anatomical structures at various depth levels along the posterior–anterior (PA) direction in chest radiography. However, DTS provides crude three-dimensional (3D) images that have poor resolution in the lateral view and can only be displayed with reasonable quality in the PA view. Furthermore, the spillover of high-contrast objects from off-fulcrum planes generates artifacts that may impede the diagnostic use of the DTS images. In this paper, the authors describe and demonstrate the use of a dual-view DTS technique to improve the accuracy of the reconstructed volume image data for more accurate rendition of the anatomy and slice images with improved resolution and reduced artifacts, thus allowing the 3D image data to be viewed in views other than the PA view. Methods: With the dual-view DTS technique, limited angle scans are performed and projection images are acquired in two orthogonal views: PA and lateral. The dual-view projection data are used together to reconstruct 3D images using the maximum likelihood expectation maximization iterative algorithm. In this study, projection images were simulated or experimentally acquired over 360° using the scanning geometry for cone beam computed tomography (CBCT). While all projections were used to reconstruct CBCT images, selected projections were extracted and used to reconstruct single- and dual-view DTS images for comparison with the CBCT images. For realistic demonstration and comparison, a digital chest phantom derived from clinical CT images was used for the simulation study. An anthropomorphic chest phantom was imaged for the experimental study. The resultant dual-view DTS images were visually compared with the single-view DTS images and CBCT images for the presence of image artifacts and accuracy of CT numbers and anatomy and quantitatively compared with root-mean-square-deviation (RMSD) values

  13. Invariants of directed spaces

    DEFF Research Database (Denmark)

    Raussen, Martin

    2007-01-01

    Directed spaces are the objects of study within directed algebraic topology. They are characterised by spaces of directed paths associated to a source and a target, both elements of an underlying topological space. The algebraic topology of these path spaces and their connections are studied from...... a categorical perspective. In particular, we study the preorder category associated to a directed space and various "quotient" categories arising from algebraic topological functors. Furthermore, we propose and study a new notion of directed homotopy equivalence between directed spaces....

  14. 77 FR 34281 - Airworthiness Directives; Schweizer Aircraft Corporation

    Science.gov (United States)

    2012-06-11

    ... Internet at http://www.regulations.gov or in person at the Docket Operations Office between 9 a.m. and 5 p... mounting brackets for wear greater than 0.002-inch deep, and replacing the mounting bracket if the bracket wear exceeds 0.002-inch deep. Modifying the aft fuselage assembly by installing Inspection Panel kit P...

  15. 78 FR 23698 - Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters

    Science.gov (United States)

    2013-04-22

    ... Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE... require removing the No. 1 engine tube, cutting off two inches from the discharge end of the tube, and... procedures to cut two inches off the tube's discharge end, as well as how to inspect and reposition, if...

  16. Development of a 14-inch ID High-Pressure Hybrid Riser for SBOP Drilling Développement d’un riser hybride 14”ID haute pression pour le forage SBOP

    Directory of Open Access Journals (Sweden)

    Persent E.

    2009-11-01

    Full Text Available This paper discusses the development of a 14-inch ID high-pressure hybrid riser (10 000 psi for surface BOP drilling in ultra-deep water (10 000 ft. The high-pressure hybrid riser system is obtained by adapting and combining two existing technologies, previously developed by the IFP for other applications: – the Clip connector, a double breech-block type connector to provide a quick and safe connection for riser joints; – hybrid pipe technology, a steel pipe hoop-wound with tapes of carbon fibers impregnated with polyamide thermoplastic resin. IFP has developed a new 14-inch ID HP Clip connector for the hybrid riser application. The connector is capable of withstanding a 2.8 million pound tension and a 10 000 psi operating pressure. In addition, a 16-inch nominal OD hybrid riser pipe has been designed to replace the steel riser pipe with a thinnerwalled hoop-wound steel pipe. The significant weight savings that can be achieved with the hybrid riser pipe make it possible to design an effective riser architecture to withstand the high pressure and deep water requirements. Pursuant to design studies, a 14-inch ID prototype assembly consisting of two hybrid riser pipe sections with a high-pressure Clip connector was manufactured. A test program, including burst and collapse tests as well as cyclic fatigue testing, was formulated and carried out to qualify the performance of the Clip connector and hybrid riser pipe system. Completion of hybrid pipe additional fatigue testing and realization of a scale-one field testing of the hybrid riser are considered as the next steps of the project. To date, the main test results (burst, collapse, fatigue resistance confirm that the Clip connector and the hybrid pipe technologies are well suited for ultra-deep sea drilling with a surface BOP. However, the fatigue resistance of hybrid riser pipes still needs to be better characterized. Cet article présente le développement d’un riser hybride 14”ID haute

  17. Radiation Characterization Summary: ACRR Polyethylene-Lead-Graphite (PLG) Bucket Located in the Central Cavity on the 32-Inch Pedestal at the Core Centerline (ACRR-PLG-CC-32-cl).

    Energy Technology Data Exchange (ETDEWEB)

    Parma, Edward J.,; Vehar, David W.; Lippert, Lance L.; Griffin, Patrick J.; Naranjo, Gerald E.; Luker, Spencer M.

    2015-06-01

    This document presents the facility-recommended characterization of the neutron, prompt gamma-ray, and delayed gamma-ray radiation fields in the Annular Core Research Reactor (ACRR) for the polyethylene-lead-graphite (PLG) bucket in the central cavity on the 32-inch pedestal at the core centerline. The designation for this environment is ACRR-PLG-CC-32-cl. The neutron, prompt gamma-ray, and delayed gamma-ray energy spectra, uncertainties, and covariance matrices are presented as well as radial and axial neutron and gamma-ray fluence profiles within the experiment area of the bucket. Recommended constants are given to facilitate the conversion of various dosimetry readings into radiation metrics desired by experimenters. Representative pulse operations are presented with conversion examples. Acknowledgements The authors wish to thank the Annular Core Research Reactor staff and the Radiation Metrology Laboratory staff for their support of this work. Also thanks to David Ames for his assistance in running MCNP on the Sandia parallel machines.

  18. Alice Views Jupiter and Io

    Science.gov (United States)

    2007-01-01

    This graphic illustrates the pointing and shows the data from one of many observations made by the New Horizons Alice ultraviolet spectrometer (UVS) instrument during the Pluto-bound spacecraft's recent encounter with Jupiter. The red lines in the graphic show the scale, orientation, and position of the combined 'box and slot' field of view of the Alice UVS during this observation. The positions of Jupiter's volcanic moon, Io, the torus of ionized gas from Io, and Jupiter are shown relative to the Alice field of view. Like a prism, the spectrometer separates light from these targets into its constituent wavelengths. Io's volcanoes produce an extremely tenuous atmosphere made up primarily of sulfur dioxide gas, which, in the harsh plasma environment at Io, breaks down into its component sulfur and oxygen atoms. Alice observed the auroral glow from these atoms in Io's atmosphere and their ionized counterparts in the Io torus. Io's dayside is deliberately overexposed to bring out faint details in the plumes and on the moon's night side. The continuing eruption of the volcano Tvashtar, at the 1 o'clock position, produces an enormous plume roughly 330 kilometers (200 miles) high, which is illuminated both by sunlight and 'Jupiter light.'

  19. Data Model as an Architectural View

    Science.gov (United States)

    2009-10-01

    for architecture documentation geared towards information systems prescribe a data view [Garland 2003], data architecture view [ TOGAF 2007], or...entity-relationship diagrams. The Open Group Architecture Framework ( TOGAF ) suggests entity-relationship dia- grams to illustrate the Information...Systems Architecture – Data Architecture views [ TOGAF 2007]. The ―4+1‖ View Model of Software Architecture indicates that entity-relationship dia

  20. Direct access: how is it working?

    Science.gov (United States)

    Turner, S; Ross, M

    2017-02-10

    Aim The aim of this study was to identify and survey dental hygienists and therapists working in direct access practices in the UK, obtain their views on its benefits and disadvantages, establish which treatments they provided, and what barriers they had encountered.Method The study used a purposive sample of GDC-registered hygienists and therapists working in practices offering direct access, identified through a 'Google' search. An online survey was set up through the University of Edinburgh, and non-responses followed up by post.Results The initial search identified 243 individuals working in direct access practices. Where a practice listed more than one hygienist/therapist, one was randomly selected. This gave a total of 179 potential respondents. Eighty-six responses were received, representing a response rate of 48%. A large majority of respondents (58, 73%) were favourable in their view of the GDC decision to allow direct access, and most thought advantages outnumbered disadvantages for patients, hygienists, therapists and dentists. There were no statistically significant differences in views between hygienists and therapists. Although direct access patients formed a small minority of their caseload for most respondents, it is estimated that on average respondents saw approximately 13 per month. Treatment was mainly restricted to periodontal work, irrespective of whether the respondent was singly or dually qualified. One third of respondents reported encountering barriers to successful practice, including issues relating to teamwork and dentists' unfavourable attitudes. However, almost two thirds (64%) felt that direct access had enhanced their job satisfaction, and 45% felt their clinical skills had increased.Discussion Comments were mainly positive, but sometimes raised worrying issues, for example in respect to training, lack of dental nurse support and the limited availability of periodontal treatment under NHS regulations.

  1. Guidelines for direct radionuclide cystography in children.

    Science.gov (United States)

    Fettich, Jure; Colarinha, Paula; Fischer, Sibylle; Frökier, Jörgen; Gordon, Isky; Hahn, Klaus; Kabasakal, Levent; Mann, Mike; Mitjavila, Mercedes; Olivier, Pierre; Piepsz, Amy; Porn, Ute; Roca, Isabel; Sixt, Rune; van Velzen, Jeannette

    2003-05-01

    These guidelines, which summarise the views of the Paediatric Committee of the European Association of Nuclear Medicine, provide a framework which may prove helpful to nuclear medicine teams in daily practice. They contain information on the indications, acquisition, processing and interpretation of direct radioisotope cystography in children. The guidelines should be taken in the context of "good practice" and any local/national rules which apply to nuclear medicine examinations.

  2. A Photographic View of Cumulative Distribution Functions

    Science.gov (United States)

    Jernigan, Robert W.

    2008-01-01

    This article shows a concrete and easy recognizable view of a cumulative distribution function(cdf). Photograph views of the search tabs on dictionaries are used to increase students' understanding and facility with the concept of a cumulative distribution function. Projects for student investigations are also given. This motivation and view helps…

  3. Learning QlikView data visualization

    CERN Document Server

    Pover, Karl

    2013-01-01

    A practical and fast-paced guide that gives you all the information you need to start developing charts from your data.Learning QlikView Data Visualization is for anybody interested in performing powerful data analysis and crafting insightful data visualization, independent of any previous knowledge of QlikView. Experience with spreadsheet software will help you understand QlikView functions.

  4. Views of Dr. Martin Luther King, Jr.

    Science.gov (United States)

    Davis, Alan H.

    1990-01-01

    Discusses views of Martin Luther King, Jr., including concepts of human rights, related counseling approaches, and ethics. Claims King's views provide helpful insights for counselors and clients. Concludes King invited individuals to view challenging life situations as moral opportunities. (Author/ABL)

  5. View based approach to forensic face recognition

    NARCIS (Netherlands)

    Dutta, A.; van Rootseler, R.T.A.; Veldhuis, Raymond N.J.; Spreeuwers, Lieuwe Jan

    Face recognition is a challenging problem for surveillance view images commonly encountered in a forensic face recognition case. One approach to deal with a non-frontal test image is to synthesize the corresponding frontal view image and compare it with frontal view reference images. However, it is

  6. Extraction of left-ventricular torsion angle from the long-axis view by block-matching algorithm: Comparison with the short-axis view.

    Science.gov (United States)

    Arab-Baferani, Zahra; Mokhtari-Dizaji, Manijhe; Roshanali, Farideh

    2013-02-01

    Due to limitations in measuring the torsion angle in the short-axis view when studying through-plane motion and so it is dependent on reference levels, in this study, we follow myocardial movement along the long-axis of the left ventricle (LV). Then, LV torsion is estimated in the long-axis view and compared with LV torsion in the short-axis view. Two dimensional echocardiographic images of healthy persons were recorded in cine loop format position throughout four cardiac cycles at basal and apical levels in the long- and short-axis views. The motion vectors for reign of interest in the horizontal and vertical directions were obtained by block matching algorithm. Correlation between the values of automated analysis and manual tracing was performed by Pearson correlation analysis. Then, the maximum rotation angles of the short- and long-axis views at basal and apical levels were assessed. Left-ventricular torsion angles in short-axis and long-axis views were calculated and compared based on rotation angles. There was a high correlation between the measured myocardial wall displacement of automated analysis (BM algorithm) and manual tracing (R=0.96, p<0.05). The maximum rotation angles of basal and apical levels in the short-axis view are 7.96±1.57° and 9.49±1.72° and so in the long-axis view are 18.51±3.41° and 14.74±2.91°, respectively. The LV torsion angles and the time to reach peak LV torsion angles in the short-axis views are 17.26±2.53°, 293±26ms and in the long-axis view are 32.26±5.60° and 290±22ms respectively. There was a high correlation between the left-ventricular torsion angle in the short-axis view and the long-axis view (R=0.92, p<0.05). There was also a high correlation between the time to reach peak left-ventricular torsion angle in the short-axis view as compared to the long-axis view (R=0.97, p<0.05). This study suggested that the LVtorsion angles in the short- and long-axis views were significantly correlated. It is concluded that

  7. Directional Joint Bilateral Filter for Depth Images

    Directory of Open Access Journals (Sweden)

    Anh Vu Le

    2014-06-01

    Full Text Available Depth maps taken by the low cost Kinect sensor are often noisy and incomplete. Thus, post-processing for obtaining reliable depth maps is necessary for advanced image and video applications such as object recognition and multi-view rendering. In this paper, we propose adaptive directional filters that fill the holes and suppress the noise in depth maps. Specifically, novel filters whose window shapes are adaptively adjusted based on the edge direction of the color image are presented. Experimental results show that our method yields higher quality filtered depth maps than other existing methods, especially at the edge boundaries.

  8. Critical Review of Directional Neutron Survey Meters

    International Nuclear Information System (INIS)

    Balmer, M.J.I.; Gamage, K.A.A.; Taylor, G.C.

    2013-06-01

    Having been overlooked for many years, research is now starting to take into account the directional distribution of the neutron work place field. The impact of not taking this into account has led to overly conservative estimates of dose in neutron workplace fields. This paper provides a critical review of this existing research into directional survey meters which could improve these estimates of dose. Instruments which could be adapted for use as directional neutron survey meters are also considered within this review. Using Monte-Carlo techniques, two of the most promising existing designs are evaluated; a boron-doped liquid scintillator and a multi-detector directional spectrometer. As an outcome of these simulations, possible adaptations to these instruments are suggested with a view to improving the portability of the instrument. (authors)

  9. Geothermal direct use engineering and design guidebook

    Energy Technology Data Exchange (ETDEWEB)

    Bloomquist, R.G.; Culver, G.; Ellis, P.F.; Higbee, C.; Kindle, C.; Lienau, P.J.; Lunis, B.C.; Rafferty, K.; Stiger, S.; Wright, P.M.

    1989-03-01

    The Geothermal Direct Use Engineering and Design Guidebook is designed to be a comprehensive, thoroughly practical reference guide for engineers and designers of direct heat projects. These projects could include the conversion of geothermal energy into space heating cooling of buildings, district heating, greenhouse heating, aquaculture and industrial processing. The Guidebook is directed at understanding the nature of geothermal resources and the exploration of these resources, fluid sampling techniques, drilling, and completion of geothermal wells through well testing, and reservoir evaluation. It presents information useful to engineers on the specification of equipment including well pumps, piping, heat exchangers, space heating equipment, heat pumps and absorption refrigeration. A compilation of current information about greenhouse, aquaculture and industrial applications is included together with a discussion of engineering cost analysis, regulation requirements, and environmental considerations. The purpose of the Guidebook is to provide an integrated view for the development of direct use projects for which there is a very potential in the United States.

  10. Geothermal direct use engineering and design guidebook

    Energy Technology Data Exchange (ETDEWEB)

    Lienau, P.J.; Lunis, B.C. (eds.)

    1991-01-01

    The Geothermal Direct Use Engineering and Design Guidebook is designed to be a comprehensive, thoroughly practical reference guide for engineers and designers of direct heat projects. These projects could include the conversion of geothermal energy into space heating and cooling of buildings, district heating, greenhouse heating, aquaculture and industrial processing. The Guidebook is directed at understanding the nature of geothermal resources and the exploration of the resources, fluid sampling techniques, drilling, and completion of geothermal wells through well testing, and reservoir evaluation. It presents information useful to engineers on the specification of equipment including well pumps, piping, heat exchangers, space heating equipment, heat pumps and absorption refrigeration. A compilation of current information about greenhouse aquaculture and industrial applications is included together with a discussion of engineering cost analysis, regulation requirements, and environmental consideration. The purpose of the Guidebook is to provide an integrated view for the development of direct use projects for which there is a very large potential in the United States.

  11. Geothermal direct use engineering and design guidebook

    International Nuclear Information System (INIS)

    Lienau, P.J.; Lunis, B.C.

    1991-01-01

    The Geothermal Direct Use Engineering and Design Guidebook is designed to be a comprehensive, thoroughly practical reference guide for engineers and designers of direct heat projects. These projects could include the conversion of geothermal energy into space heating and cooling of buildings, district heating, greenhouse heating, aquaculture and industrial processing. The Guidebook is directed at understanding the nature of geothermal resources and the exploration of the resources, fluid sampling techniques, drilling, and completion of geothermal wells through well testing, and reservoir evaluation. It presents information useful to engineers on the specification of equipment including well pumps, piping, heat exchangers, space heating equipment, heat pumps and absorption refrigeration. A compilation of current information about greenhouse aquaculture and industrial applications is included together with a discussion of engineering cost analysis, regulation requirements, and environmental consideration. The purpose of the Guidebook is to provide an integrated view for the development of direct use projects for which there is a very large potential in the United States

  12. Direct ophthalmoscopy on YouTube

    DEFF Research Database (Denmark)

    Borgersen, Nanna Jo; Henriksen, Mikael Johannes Vuokko; Konge, Lars

    2016-01-01

    BACKGROUND: Direct ophthalmoscopy is well-suited for video-based instruction, particularly if the videos enable the student to see what the examiner sees when performing direct ophthalmoscopy. We evaluated the pedagogical effectiveness of instructional YouTube videos on direct ophthalmoscopy...... in general. We then systematically searched YouTube. Two authors reviewed eligible videos to assess eligibility and extract data on video statistics, content, and approach to visualization. Correlations between video statistics and contents were investigated using two-tailed Spearman's correlation. RESULTS...... the patient and how to examine the fundus. Time spent on fundus examination correlated with the number of views per week (Spearman's ρ=0.53; P=0.029). CONCLUSION: Videos may help overcome the pedagogical issues in teaching direct ophthalmoscopy; however, the few available videos on YouTube fail to address...

  13. Critical review of directional neutron survey meters

    Science.gov (United States)

    Balmer, Matthew J. I.; Gamage, Kelum A. A.; Taylor, Graeme C.

    2014-01-01

    Having been overlooked for many years, research is now starting to take into account the directional distribution of the neutron work place field. The impact of not taking this into account has led to overly conservative estimates of dose in neutron workplace fields. This paper provides a critical review of this existing research into directional survey meters which could improve these estimates of dose. Instruments which could be adapted for use as directional neutron survey meters are also considered within this review. Using Monte-Carlo techniques, two of the most promising existing designs are evaluated; a boron-doped liquid scintillator and a multi-detector directional spectrometer. As an outcome of these simulations, possible adaptations to these instruments are suggested with a view to improving the portability of the instrument.

  14. Direct immunofluorescence microscopy

    NARCIS (Netherlands)

    Diercks, G.F.H.; Pas, Hendrikus; Jonkman, Marcel

    2016-01-01

    Direct immunofluorescence plays an important role in the diagnosis of autoimmune bullous diseases. The purpose of direct immunofluorescence microscopy is to detect in vivo antibodies in patient's skin or mucosa. Direct immunofluorescence of pemphigus shows depositions of immunoglobulins and/or

  15. Scientists' views about communication objectives.

    Science.gov (United States)

    Besley, John C; Dudo, Anthony; Yuan, Shupei

    2017-08-01

    This study looks at how United States-based academic scientists from five professional scientific societies think about eight different communication objectives. The degree to which scientists say they would prioritize these objectives in the context of face-to-face public engagement is statistically predicted using the scientists' attitudes, normative beliefs, and efficacy beliefs, as well as demographics and past communication activity, training, and past thinking about the objectives. The data allow for questions about the degree to which such variables consistently predict views about objectives. The research is placed in the context of assessing factors that communication trainers might seek to reshape if they wanted get scientists to consider choosing specific communication objectives.

  16. Opposing views on contraceptives presented.

    Science.gov (United States)

    This article presents two opposing views on the importance of artificial contraceptives. It is noted that in the April 19 issue of the Manila Bulletin, Ms. Ethel Soliven wrote in her column that the position of the Catholic Church on artificial contraceptives is standing in the way of success of the Philippine family planning campaign. To this effect, Sister Mary Pilar Versoza of the Religious of the Good Shepherd, sent a letter of rebuttal saying that the church has never been remiss in emphasizing the true meaning of sexual act, love and relationship, marriage, and family responsibilities. Sister Pilar contended that ligation and condoms do not solve husbands¿ selfishness. In response, Soliven argued in another issue of the Manila Bulletin that she believes in the need to provide access to artificial contraceptives. Soliven asserted that destitute couples who cannot provide their families with even the barest necessities of life should be provided with the means with which to prevent unwanted pregnancies.

  17. Consumer views on DTCA advertising.

    NARCIS (Netherlands)

    Dijk, L. van; Vervloet, M.; Friele, R.D.

    2011-01-01

    Background: In most Western countries, except for New Zealand and the USA, direct-to-consumer advertising of prescription drugs is prohibited. Currently, at European level, there is an ongoing discussion whether or not to allow pharmaceutical companies to inform consumers about prescription drugs.

  18. VISTA Views the Sculptor Galaxy

    Science.gov (United States)

    2010-06-01

    A spectacular new image of the Sculptor Galaxy (NGC 253) has been taken with the ESO VISTA telescope at the Paranal Observatory in Chile as part of one of its first major observational campaigns. By observing in infrared light VISTA's view is less affected by dust and reveals a myriad of cooler stars as well as a prominent bar of stars across the central region. The VISTA image provides much new information on the history and development of the galaxy. The Sculptor Galaxy (NGC 253) lies in the constellation of the same name and is one of the brightest galaxies in the sky. It is prominent enough to be seen with good binoculars and was discovered by Caroline Herschel from England in 1783. NGC 253 is a spiral galaxy that lies about 13 million light-years away. It is the brightest member of a small collection of galaxies called the Sculptor Group, one of the closest such groupings to our own Local Group of galaxies. Part of its visual prominence comes from its status as a starburst galaxy, one in the throes of rapid star formation. NGC 253 is also very dusty, which obscures the view of many parts of the galaxy (eso0902). Seen from Earth, the galaxy is almost edge on, with the spiral arms clearly visible in the outer parts, along with a bright core at its centre. VISTA, the Visible and Infrared Survey Telescope for Astronomy, the latest addition to ESO's Paranal Observatory in the Chilean Atacama Desert, is the world's largest survey telescope. After being handed over to ESO at the end of 2009 (eso0949) the telescope was used for two detailed studies of small sections of the sky before it embarked on the much larger surveys that are now in progress. One of these "mini surveys" was a detailed study of NGC 253 and its environment. As VISTA works at infrared wavelengths it can see right through most of the dust that is such a prominent feature of the Sculptor Galaxy when viewed in visible light. Huge numbers of cooler stars that are barely detectable with visible

  19. [Acupuncture direction and analgesia].

    Science.gov (United States)

    Sun, Lu; Kou, Renzhong; Liu, Lanqing; Fan, Gangqi

    2017-03-12

    The acupuncture direction is closely related with the efficacy of acupuncture analgesia. In this article, the relationship between efficacy of acupuncture analgesia and factors, such as whether the needle towards disease location, whether the needle towards meridian direction, whether the needle following spinal cord direction and whether the needle following muscle direction, were analyzed. The previous clinical and literature research indicated that the needle towards disease location was superior to reverse direction, however, the efficacy of analgesia between needle following and reversing meridian, needle towards and at disease location, needles following and reversing spinal cord direction, needles following and reversing muscle direction was controversial. Therefore, the solutions to these problems will benefit the optimized acupuncture treatment plan for pain disorders.

  20. Videographic analysis of glottic view with increasing cricoid pressure force.

    Science.gov (United States)

    Oh, Jaehoon; Lim, Taeho; Chee, Youngjoon; Kang, Hyunggoo; Cho, Youngsuk; Lee, Jongshill; Kim, Dongwon; Jeong, Miae

    2013-04-01

    Cricoid pressure may negatively affect laryngeal view and compromise airway patency, according to previous studies of direct laryngoscopy, endoscopy, and radiologic imaging. In this study, we assess the effect of cricoid pressure on laryngeal view with a video laryngoscope, the Pentax-AWS. This cross-sectional survey involved 50 American Society of Anesthesiologists status I and II patients who were scheduled to undergo elective surgery. The force measurement sensor for cricoid pressure and the video recording system using a Pentax-AWS video laryngoscope were newly developed by the authors. After force and video were recorded simultaneously, 11 still images were selected per 5-N (Newton; 1 N = 1 kg·m·s(-2)) increments, from 0 N to 50 N for each patient. The effect of cricoid pressure was assessed by relative percentage compared with the number of pixels on an image at 0 N. Compared with zero cricoid pressure, the median percentage of glottic view visible was 89.5% (interquartile range [IQR] 64.2% to 117.1%) at 10 N, 83.2% (IQR 44.2% to 113.7%) at 20 N, 76.4% (IQR 34.1% to 109.1%) at 30 N, 51.0% (IQR 21.8% to 104.2%) at 40 N, and 47.6% (IQR 15.2% to 107.4%) at 50 N. The number of subjects who showed unworsened views was 20 (40%) at 10 N, 17 (34%) at 20 and 30 N, and 13 (26%) at 40 and 50 N. Cricoid pressure application with increasing force resulted in a worse glottic view, as examined with the Pentax-AWS Video laryngoscope. There is much individual difference in the degree of change, even with the same force. Clinicians should be aware that cricoid pressure affects laryngeal view with the Pentax-AWS and likely other video laryngoscopes. Copyright © 2012. Published by Mosby, Inc.

  1. Viewing Majorana Bound States by Rabi Oscillations.

    Science.gov (United States)

    Wang, Zhi; Liang, Qi-Feng; Yao, Dao-Xin; Hu, Xiao

    2015-07-08

    We propose to use Rabi oscillation as a probe to view the fractional Josepshon relation (FJR) associated with Majorana bound states (MBSs) expected in one-dimensional topological superconductors. The system consists of a quantum dot (QD) and an rf-SQUID with MBSs at the Josephson junction. Rabi oscillations between energy levels formed by MBSs are induced by ac gate voltage controlling the coupling between QD and MBS when the photon energy proportional to the ac frequency matches gap between quantum levels formed by MBSs and QD. As a manifestation of the Rabi oscillation in the whole system involving MBSs, the electron occupation on QD oscillates with time, which can be measured by charge sensing techniques. With Floquet theorem and numerical analysis we reveal that from the resonant driving frequency for coherent Rabi oscillation one can directly map out the FJR cos(πΦ/Φ0) as a signature of MBSs, with Φ the magnetic flux through SQUID and Φ0 = hc/2e the flux quantum. The present scheme is expected to provide a clear evidence for MBSs under intensive searching.

  2. The Mirror Neuron System: A Fresh View

    Science.gov (United States)

    Casile, Antonino; Caggiano, Vittorio; Ferrari, Pier Francesco

    2013-01-01

    Mirror neurons are a class of visuomotor neurons in the monkey premotor and parietal cortices that discharge during the execution and observation of goal-directed motor acts. They are deemed to be at the basis of primates’ social abilities. In this review, the authors provide a fresh view about two still open questions about mirror neurons. The first question is their possible functional role. By reviewing recent neurophysiological data, the authors suggest that mirror neurons might represent a flexible system that encodes observed actions in terms of several behaviorally relevant features. The second question concerns the possible developmental mechanisms responsible for their initial emergence. To provide a possible answer to question, the authors review two different aspects of sensorimotor development: facial and hand movements, respectively. The authors suggest that possibly two different “mirror” systems might underlie the development of action understanding and imitative abilities in the two cases. More specifically, a possibly prewired system already present at birth but shaped by the social environment might underlie the early development of facial imitative abilities. On the contrary, an experience-dependent system might subserve perception-action couplings in the case of hand movements. The development of this latter system might be critically dependent on the observation of own movements. PMID:21467305

  3. INSPIRE from the JRC Point of View

    Directory of Open Access Journals (Sweden)

    Vlado Cetl

    2012-12-01

    Full Text Available This paper summarises some recent developments in INSPIRE implementation from the JRC (Joint Research Centre point of view. The INSPIRE process started around 11 years ago and today, clear results and benefits can be seen. Spatial data are more accessible and shared more frequently between countries and at the European level. In addition to this, efficient, unified coordination and collaboration between different stakeholders and participants has been achieved, which is another great success. The JRC, as a scientific think-tank of the European Commission, has played a very important role in this process from the very beginning. This role is in line with its mission, which is to provide customer-driven scientific and technical support for the conception, development, implementation and monitoring of European Union (EU policies. The JRC acts as the overall technical coordinator of INSPIRE, but it also carries out the activities necessary to support the coherent implementation of INSPIRE, by helping member states in the implementation process. Experiences drawn from collaboration and negotiation in each country and at the European level will be of great importance in the revision of the INSPIRE Directive, which is envisaged for 2014. Keywords: spatial data infrastructure (SDI; INSPIRE; development; Joint Research Centre (JRC

  4. The optimal viewing position in face recognition.

    Science.gov (United States)

    Hsiao, Janet H; Liu, Tina T

    2012-02-28

    In English word recognition, the best recognition performance is usually obtained when the initial fixation is directed to the left of the center (optimal viewing position, OVP). This effect has been argued to involve an interplay of left hemisphere lateralization for language processing and the perceptual experience of fixating at word beginnings most often. While both factors predict a left-biased OVP in visual word recognition, in face recognition they predict contrasting biases: People prefer to fixate the left half-face, suggesting that the OVP should be to the left of the center; nevertheless, the right hemisphere lateralization in face processing suggests that the OVP should be to the right of the center in order to project most of the face to the right hemisphere. Here, we show that the OVP in face recognition was to the left of the center, suggesting greater influence from the perceptual experience than hemispheric asymmetry in central vision. In contrast, hemispheric lateralization effects emerged when faces were presented away from the center; there was an interaction between presented visual field and location (center vs. periphery), suggesting differential influence from perceptual experience and hemispheric asymmetry in central and peripheral vision.

  5. External laryngeal manipulation done by the laryngoscopist makes the best laryngeal view for intubation

    Directory of Open Access Journals (Sweden)

    Mohamed Shaaban Ali

    2014-01-01

    Full Text Available Purpose: External laryngeal manipulation (ELM is used to get better laryngeal view during direct laryngoscopy. This study was designed to test the hypothesis that ELM done by the intubating anesthetist (laryngoscopist offers the best laryngeal view for tracheal intubation. Materials and method: A total of 160 patients underwent different surgical procedures were included in this study. Percentage of glottic opening (POGO score and Cormack and Lehane scale were used as outcome measures for comparison between different laryngoscopic views. Four views were described; basic laryngoscopic view and then views after ELM done by the assistant, by the laryngoscopist and finally by the assistant after the guidance from the laryngoscopist respectively. The last three views compared with the basic laryngoscopic view. Results: ELM done by the laryngoscopist or by the assistant after guidance from the laryngoscopist showed significant improvement of Cormack grades and POGO scores compared with basic laryngoscopic view. Number of patients with Cormack grade1 increased from 39 after direct laryngoscopy to 97 and 96 patients (P < 0.001 by Fisher′s exact test, after ELM done by the laryngoscopist and that done by the assistant after guidance from the anesthetist respectively. Furthermore, the number of patients with POGO scores of 100% increased from 39 after direct laryngoscopy to 78 and 61 (P < 0.01 patients after ELM done by the laryngoscopist and that done by the assistant after guidance from the anesthetist respectively. Conclusion: It appeared from this study that ELM done by the anesthetist makes the best laryngeal view for tracheal intubation.

  6. Social relevance drives viewing behavior independent of low-level salience in rhesus macaques

    Directory of Open Access Journals (Sweden)

    James Andrew Solyst

    2014-11-01

    Full Text Available Quantifying attention to social stimuli during the viewing of complex social scenes with eye tracking has proven to be a sensitive method in the diagnosis of autism spectrum disorders years before average clinical diagnosis. Rhesus macaques provide an ideal model for understanding the mechanisms underlying social viewing behavior, but to date no comparable behavioral task has been developed for use in monkeys. Using a novel scene-viewing task, we monitored the gaze of three rhesus macaques while they freely viewed well-controlled composed social scenes and analyzed the time spent viewing objects and monkeys. In each of six behavioral sessions, monkeys viewed a set of 90 images (540 unique scenes with each image presented twice. In two-thirds of the repeated scenes, either a monkey or an object was replaced with a novel item (manipulated scenes. When viewing a repeated scene, monkeys made longer fixations and shorter saccades, shifting from a rapid orienting to global scene contents to a more local analysis of fewer items. In addition to this repetition effect, in manipulated scenes, monkeys demonstrated robust memory by spending more time viewing the replaced items. By analyzing attention to specific scene content, we found that monkeys strongly preferred to view conspecifics and that this was not related to their salience in terms of low-level image features. A model-free analysis of viewing statistics found that monkeys that were viewed earlier and longer had direct gaze and redder sex skin around their face and rump, two important visual social cues. These data provide a quantification of viewing strategy, memory and social preferences in rhesus macaques viewing complex social scenes, and they provide an important baseline with which to compare to the effects of therapeutics aimed at enhancing social cognition.

  7. The view from a balloon

    International Nuclear Information System (INIS)

    Burton, I.

    1990-01-01

    An overview is presented of the policy and philosophical aspects of global warming. The historical evolution of the global warming and climate change issue is reviewed, and the current situation is compared to that of the period 1968-72. There is a growing perception of increasing divergence of interests, between north and south, in Canada between hydro and nuclear regions, and the coal, oil and gas regions. The climate debate is entering a phase in which better and more specific answers will have to be provided from social analysts proposing action and policy initiatives. The direction of the urban-industrial society should continue to be challenged. It would be worthwhile to try to describe in more detail the kind of sustainable future that is desired. It is necessary to make common cause with the trends and forces that point in the same social direction as climate change studies. Policy formulas must be integrated at the analytical level

  8. Instrumentation effects on U and Pu CBNM standards spectra quality measured on a 500 mm3 CdZnTe and a 2×2 inch LaBr3 detectors

    Science.gov (United States)

    Meleshenkovskii, I.; Borella, A.; Van der Meer, K.; Bruggeman, M.; Pauly, N.; Labeau, P. E.; Schillebeeckx, P.

    2018-01-01

    Nowadays, there is interest in developing gamma-ray measuring devices based on the room temperature operated medium resolution detectors such as semiconductor detectors of the CdZnTe type and scintillators of the LaBr3 type. This is true also for safeguards applications and the International Atomic Energy Agency (IAEA) has launched a project devoted to the assessment of medium resolution gamma-ray spectroscopy for the verification of the isotopic composition of U and Pu bearing samples. This project is carried out within the Non-Destructive Assay Working Group of the European Safeguards Research and Development Association (ESARDA). In this study we analyze medium resolution spectra of U and Pu standards with the aim to develop an isotopic composition determination algorithm, particularly suited for these types of detectors. We show how the peak shape of a CdZnTe detector is influenced by the instrumentation parameters. The experimental setup consisted of a 500 mm3 CdZnTe detector, a 2×2 inch LaBr3 detector, two types of measurement instrumentation - an analogue one and a digital one, and a set of certified samples - a 207Bi point source and U and Pu CBNM standards. The results of our measurements indicate that the lowest contribution to the peak asymmetry and thus the smallest impact on the resolution of the 500 mm3 CdZnTe detector was achieved with the digital MCA. Analysis of acquired spectra allowed to reject poor quality measurement runs and produce summed spectra files with the least impact of instrumentation instabilities. This work is preliminary to further studies concerning the development of an isotopic composition determination algorithm particularly suited for CZT and LaBr3 detectors for safeguards applications.

  9. Instrumentation effects on U and Pu CBNM standards spectra quality measured on a 500 mm3 CdZnTe and a 2×2 inch LaBr3 detectors

    Directory of Open Access Journals (Sweden)

    Meleshenkovskii I.

    2018-01-01

    Full Text Available Nowadays, there is interest in developing gamma-ray measuring devices based on the room temperature operated medium resolution detectors such as semiconductor detectors of the CdZnTe type and scintillators of the LaBr3 type. This is true also for safeguards applications and the International Atomic Energy Agency (IAEA has launched a project devoted to the assessment of medium resolution gamma-ray spectroscopy for the verification of the isotopic composition of U and Pu bearing samples. This project is carried out within the Non-Destructive Assay Working Group of the European Safeguards Research and Development Association (ESARDA. In this study we analyze medium resolution spectra of U and Pu standards with the aim to develop an isotopic composition determination algorithm, particularly suited for these types of detectors. We show how the peak shape of a CdZnTe detector is influenced by the instrumentation parameters. The experimental setup consisted of a 500 mm3 CdZnTe detector, a 2×2 inch LaBr3 detector, two types of measurement instrumentation – an analogue one and a digital one, and a set of certified samples – a 207Bi point source and U and Pu CBNM standards. The results of our measurements indicate that the lowest contribution to the peak asymmetry and thus the smallest impact on the resolution of the 500 mm3 CdZnTe detector was achieved with the digital MCA. Analysis of acquired spectra allowed to reject poor quality measurement runs and produce summed spectra files with the least impact of instrumentation instabilities. This work is preliminary to further studies concerning the development of an isotopic composition determination algorithm particularly suited for CZT and LaBr3 detectors for safeguards applications.

  10. Perspective View, San Andreas Fault

    Science.gov (United States)

    2000-01-01

    The prominent linear feature straight down the center of this perspective view is California's famous San Andreas Fault. The image, created with data from NASA's Shuttle Radar Topography Mission (SRTM), will be used by geologists studying fault dynamics and landforms resulting from active tectonics. This segment of the fault lies west of the city of Palmdale, Calif., about 100 kilometers (about 60 miles) northwest of Los Angeles. The fault is the active tectonic boundary between the North American plate on the right, and the Pacific plate on the left. Relative to each other, the Pacific plate is moving away from the viewer and the North American plate is moving toward the viewer along what geologists call a right lateral strike-slip fault. Two large mountain ranges are visible, the San Gabriel Mountains on the left and the Tehachapi Mountains in the upper right. Another fault, the Garlock Fault lies at the base of the Tehachapis; the San Andreas and the Garlock Faults meet in the center distance near the town of Gorman. In the distance, over the Tehachapi Mountains is California's Central Valley. Along the foothills in the right hand part of the image is the Antelope Valley, including the Antelope Valley California Poppy Reserve. The data used to create this image were acquired by SRTM aboard the Space Shuttle Endeavour, launched on February 11, 2000.This type of display adds the important dimension of elevation to the study of land use and environmental processes as observed in satellite images. The perspective view was created by draping a Landsat satellite image over an SRTM elevation model. Topography is exaggerated 1.5 times vertically. The Landsat image was provided by the United States Geological Survey's Earth Resources Observations Systems (EROS) Data Center, Sioux Falls, South Dakota.SRTM uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour

  11. Direct mediation, duality and unification

    International Nuclear Information System (INIS)

    Abel, Steven; Khoze, Valentin V.

    2008-01-01

    It is well-known that in scenarios with direct gauge mediation of supersymmetry breaking the messenger fields significantly affect the running of Standard Model couplings and introduce Landau poles which are difficult to avoid. Among other things, this appears to remove any possibility of a meaningful unification prediction and is often viewed as a strong argument against direct mediation. We propose two ways that Seiberg duality can circumvent this problem. In the first, which we call 'deflected-unification', the SUSY-breaking hidden sector is a magnetic theory which undergoes a Seiberg duality to an electric phase. Importantly, the electric version has fewer fundamental degrees of freedom coupled to the MSSM compared to the magnetic formulation. This changes the β-functions of the MSSM gauge couplings so as to push their Landau poles above the unification scale. We show that this scenario is realised for recently suggested models of gauge mediation based on a metastable SCQD-type hidden sector directly coupled to MSSM. The second possibility for avoiding Landau poles, which we call 'dual-unification', begins with the observation that, if the mediating fields fall into complete SU(5) multiplets, then the MSSM+messengers exhibits a fake unification at unphysical values of the gauge couplings. We show that, in known examples of electric/magnetic duals, such a fake unification in the magnetic theory reflects a real unification in the electric theory. We therefore propose that the Standard Model could itself be a magnetic dual of some unknown electric theory in which the true unification takes place. This scenario maintains the unification prediction (and unification scale) even in the presence of Landau poles in the magnetic theory below the GUT scale. We further note that this dual realization of grand unification can explain why Nature appears to unify, but the proton does not decay.

  12. Health professionals' views of overweight people and smokers.

    Science.gov (United States)

    Harvey, E L; Hill, A J

    2001-08-01

    To examine health professionals' views of overweight people, to compare these to their views of smokers, and to explore the role of level of severity on these perceptions. A postal survey of health professionals employing a two by two, independent factorial design. The health category (overweight or smoker) was divided by level of severity (moderate or extreme), so that respondents received questionnaires about either: (i) moderately overweight people; (ii) extremely overweight people; (iii) moderate smokers; or (iv) heavy smokers. Two-hundred and fifty-five general medical practitioners and clinical psychologists in the north of England. A questionnaire was designed to explore beliefs about the causes, attitudes towards, and perceptions of responsibility of overweight people and smokers. Moderately and extremely overweight people were perceived as having reduced self-esteem, sexual attractiveness and health, and to be moderately responsible for changing their situation (but less so than smokers). There were clear level effects in the perceptions of overweight, but not so for smokers. Of the four groups, moderately overweight people were viewed most positively and extremely overweight (obese) people were viewed least positively. Overall, health professionals' attitudes to overweight people were neutral to negative rather than entirely negative. However, where apparent negative attitudes were more likely to be directed at obese people than moderately overweight people. As obesity is a risk to health, the practice implications of health professionals' negative attitudes or patients' reticence to visit professionals who treat them with disregard must be addressed.

  13. Descendants and advance directives.

    Science.gov (United States)

    Buford, Christopher

    2014-01-01

    Some of the concerns that have been raised in connection to the use of advance directives are of the epistemic variety. Such concerns highlight the possibility that adhering to an advance directive may conflict with what the author of the directive actually wants (or would want) at the time of treatment. However, at least one objection to the employment of advance directives is metaphysical in nature. The objection to be discussed here, first formulated by Rebecca Dresser and labeled by Allen Buchanan as the slavery argument and David DeGrazia the someone else problem, aims to undermine the legitimacy of certain uses of advance directives by concluding that such uses rest upon an incorrect assumption about the identity over time of those ostensibly governed by the directives. There have been numerous attempts to respond to this objection. This paper aims to assess two strategies that have been pursued to cope with the problem.

  14. Directional radiation detectors

    Science.gov (United States)

    Dowell, Jonathan L.

    2017-09-12

    Directional radiation detectors and systems, methods, and computer-readable media for using directional radiation detectors to locate a radiation source are provided herein. A directional radiation detector includes a radiation sensor. A radiation attenuator partially surrounds the radiation sensor and defines an aperture through which incident radiation is received by the radiation sensor. The aperture is positioned such that when incident radiation is received directly through the aperture and by the radiation sensor, a source of the incident radiation is located within a solid angle defined by the aperture. The radiation sensor senses at least one of alpha particles, beta particles, gamma particles, or neutrons.

  15. Directed Energy Anechoic Chamber

    Data.gov (United States)

    Federal Laboratory Consortium — The Directed Energy Anechoic Chamber comprises a power anechoic chamber and one transverse electromagnetic cell for characterizing radiofrequency (RF) responses of...

  16. Time with friends and physical activity as mechanisms linking obesity and television viewing among youth

    Science.gov (United States)

    2015-01-01

    Background Though bivariate relationships between childhood obesity, physical activity, friendships and television viewing are well documented, empirical assessment of the extent to which links between obesity and television may be mediated by these factors is scarce. This study examines the possibility that time with friends and physical activity are potential mechanisms linking overweight/obesity to television viewing in youth. Methods Data were drawn from children ages 10-18 years old (M = 13.81, SD = 2.55) participating in the 2002 wave of Child Development Supplement (CDS) to the Panel Study of Income Dynamics (PSID) (n = 1,545). Data were collected both directly and via self-report from children and their parents. Path analysis was employed to examine a model whereby the relationships between youth overweight/obesity and television viewing were mediated by time spent with friends and moderate-to-vigorous physical activity (MVPA). Results Overweight/obesity was directly related to less time spent with friends, but not to MVPA. Time spent with friends was directly and positively related to MVPA, and directly and negatively related to time spent watching television without friends. In turn, MVPA was directly and negatively related to watching television without friends. There were significant indirect effects of both overweight/obesity and time with friends on television viewing through MVPA, and of overweight/obesity on MVPA through time with friends. Net of any indirect effects, the direct effect of overweight/obesity on television viewing remained. The final model fit the data extremely well (χ2 = 5.77, df = 5, pobesity and television viewing in youth. These findings highlight the importance of moving from examinations of bivariate relationships between weight status and television viewing to more nuanced explanatory models which attempt to identify and unpack the possible mechanisms linking them. PMID:26221737

  17. Time with friends and physical activity as mechanisms linking obesity and television viewing among youth.

    Science.gov (United States)

    Vandewater, Elizabeth A; Park, Seoung Eun; Hébert, Emily T; Cummings, Hope M

    2015-07-27

    Though bivariate relationships between childhood obesity, physical activity, friendships and television viewing are well documented, empirical assessment of the extent to which links between obesity and television may be mediated by these factors is scarce. This study examines the possibility that time with friends and physical activity are potential mechanisms linking overweight/obesity to television viewing in youth. Data were drawn from children ages 10-18 years old (M = 13.81, SD = 2.55) participating in the 2002 wave of Child Development Supplement (CDS) to the Panel Study of Income Dynamics (PSID) (n = 1,545). Data were collected both directly and via self-report from children and their parents. Path analysis was employed to examine a model whereby the relationships between youth overweight/obesity and television viewing were mediated by time spent with friends and moderate-to-vigorous physical activity (MVPA). Overweight/obesity was directly related to less time spent with friends, but not to MVPA. Time spent with friends was directly and positively related to MVPA, and directly and negatively related to time spent watching television without friends. In turn, MVPA was directly and negatively related to watching television without friends. There were significant indirect effects of both overweight/obesity and time with friends on television viewing through MVPA, and of overweight/obesity on MVPA through time with friends. Net of any indirect effects, the direct effect of overweight/obesity on television viewing remained. The final model fit the data extremely well (χ2 = 5.77, df = 5, pobesity and television viewing in youth. These findings highlight the importance of moving from examinations of bivariate relationships between weight status and television viewing to more nuanced explanatory models which attempt to identify and unpack the possible mechanisms linking them.

  18. Direct transfer of wafer-scale graphene films

    Science.gov (United States)

    Kim, Maria; Shah, Ali; Li, Changfeng; Mustonen, Petri; Susoma, Jannatul; Manoocheri, Farshid; Riikonen, Juha; Lipsanen, Harri

    2017-09-01

    Flexible electronics serve as the ubiquitous platform for the next-generation life science, environmental monitoring, display, and energy conversion applications. Outstanding multi-functional mechanical, thermal, electrical, and chemical properties of graphene combined with transparency and flexibility solidifies it as ideal for these applications. Although chemical vapor deposition (CVD) enables cost-effective fabrication of high-quality large-area graphene films, one critical bottleneck is an efficient and reproducible transfer of graphene to flexible substrates. We explore and describe a direct transfer method of 6-inch monolayer CVD graphene onto transparent and flexible substrate based on direct vapor phase deposition of conformal parylene on as-grown graphene/copper (Cu) film. The method is straightforward, scalable, cost-effective and reproducible. The transferred film showed high uniformity, lack of mechanical defects and sheet resistance for doped graphene as low as 18 Ω/sq and 96.5% transparency at 550 nm while withstanding high strain. To underline that the introduced technique is capable of delivering graphene films for next-generation flexible applications we demonstrate a wearable capacitive controller, a heater, and a self-powered triboelectric sensor.

  19. An integrative view of obesity.

    Science.gov (United States)

    Heber, David

    2010-01-01

    Obesity is the result of the accumulation of excess body fat and not simply excess weight that can be muscle or fat. Adipocytes function in the adaptation to starvation, in exercise energetics, and in the immune defense against pathogens. Sustained positive energy balance results in excessive accumulation of adipocytes, which, in the abdomen, leads to chronic inflammation. Although informative studies have been performed with cultured adipocytes, an integrative approach to the regulation of abdominal adipose tissue involves feedback from autocrine and paracrine effectors secreted by adipocytes, the immune system, and blood flow through adipose tissue. Numerous adipokines, chemokines, and cytokines feed back to other bodily systems to regulate both energy balance and immune function. Studies of the interactions of the gastrointestinal tract and the central nervous system, as well as psychophysiological considerations of reward circuitry in the central nervous system, have shown a general adaptation to starvation that is opposed to those strategies being proposed for the prevention and treatment of obesity, ie, food restriction and increased physical activity. The obesogenic environment of highly palatable foods with hidden fats and sugars can promote metabolic syndrome and obesity, whereas fruit and vegetables with antiinflammatory phytochemicals can counteract metabolic syndrome. Therefore, a plant-based diet and the seamless integration of increased physical activity and social support to alter modern diets and lifestyles hold out the greatest hope for the solution of the obesity epidemic. Both public health and medical nutrition approaches can benefit from this integrative view of obesity.

  20. Career development: graduate nurse views.

    Science.gov (United States)

    Cleary, Michelle; Horsfall, Jan; Muthulakshmi, Paulpandi; Happell, Brenda; Hunt, Glenn E

    2013-09-01

    To explore recent Singapore nursing graduates' experience of and views about their career development and progress. The recruitment and retention of an adequate number of registered nurses is a continuing workforce issue in Singapore and other major cities. Survey of recent nursing graduates. Recent nursing graduates from the Bachelor programme (n = 147) were sent an individual survey; a response rate of 54% was achieved. Findings show that nurses rated their self-concept in a positive manner and were most satisfied (moderately to very) with helping patients and providing effective care, and the level of patient involvement. They were least satisfied (moderately to only a little) with prestige among the general medical community and the general public, hours of work, lifestyle factors and research opportunities. The following four factors were identified as significant impediments to career development; lack of support in the work place; perceived insufficient clinical career development opportunities; excessive work hours; and limited access to merit-based places in further education. Suggestions made to overcome perceived career development barriers are as follows: broad multifactorial healthcare system changes; decreased and more flexible working hours; and fairer access to further clinical and higher education. Results highlight the value clinical nurses place on having access to career development opportunities, merit-based further education and work place supports. These factors also have the potential to influence patient care and impact on the retention of nurses in their present job and satisfaction with their nursing career. © 2013 Blackwell Publishing Ltd.

  1. Swine Flu -A Comprehensive View

    Science.gov (United States)

    Singh, Vandana; Sood, Meenakshi

    2012-07-01

    The present article is aimed on comprehensive view of Swine flu. It was first isolated from pigs in 1930 in USA. Pandemic caused by H1N1 in 2009 brought it in limelight. Itís a viral respiratory disease caused by viruses that infects pigs, resulting in nasal secretions, barking cough, decreased appetite, and listless behavior. Swine virus consist of eight RNA strands, one strand derived from human flu strains, two from avian (bird) strains, and five from swine strains. Swine flu spreads from infected person to healthy person by inhalation or ingestion of droplets contaminated with virus while sneezing or coughing. Two antiviral agents have been reported to help prevent or reduce the effects of swine flu, flu shot and nasal spray. WHO recommended for pandemic period to prevent its future outbreaks through vaccines or non-vaccines means. Antiviral drugs effective against this virus are Tamiflu and Relenza. Rapid antigen testing (RIDT), DFA testing, viral culture, and molecular testing (RT-PCR) are used for its diagnosis in laboratory

  2. School violence: an insider view.

    Science.gov (United States)

    Johnson, Shelley A; Fisher, Kathleen

    2003-01-01

    To discover what teachers perceive to be contributing factors to violence in schools. Open-ended questions were asked of a convenience sample of teachers ( = 396) during an in-service education program on school violence. The teachers were in a semi-rural school district in a Mid-Atlantic state. Answers were analyzed using content analysis; all responses were reviewed and important themes were extracted. Identified themes were then placed into suitable categories and studied to determine relationships. Of the surveys analyzed ( = 239), 13 themes were identified. The three categories which then identified probable causes of school violence were (1) lack of knowledge, (2) lack of support, and (3) inadequate safety measures. Nurses can use the results of this study in multiple ways. One is to help parents understand their role in preventing school violence. Because violence in the home and violence in the media seem to foster violent acting-out behavior, nurses can teach parents about these correlations and seek solutions such as the elimination of family violence, and monitoring television viewing and video games. Nursing assessments of school-aged children and their families can include these elements. School nurses in particular can use these study results as an opportunity to develop interventions for students, teachers, and families that stress knowledge building about impulse control, anger management, appropriate parenting, and early intervention for at-risk children.

  3. Contemporary views on selective mutism

    Directory of Open Access Journals (Sweden)

    Dimoski Sanja

    2016-01-01

    Full Text Available The aim of this paper is to review contemporary literature on selective mutism (SM, available in our language. The paper includes a contemporary definition of the disorder, previous studies of selective mutism, theories about its origin, and treatment. SM is a disorder that occurs in childhood, when a child's speech is selectively lacking in certain social situations. School is the context in which the disorder is typically manifested, which is why SM is often diagnosed only after children start school. The paper gives a historical account of changes in views on this disorder. Modern conceptions emphasize selective inability of children to spontaneously and successfully express themselves verbally. In researching SM, case studies on children who have selective mutism are most commonly published. Etiological factors are not precisely defined, and different conceptions give their interpretations depending on various theoretical frameworks. Some studies consistently indicate a relation between SM and social anxiety, and some with opposing behavior and delays in language development. Based on theoretical explanations of SM, psychological interventions (behavioral and cognitive-behavioral, psychodynamic and projective techniques, counseling and family therapy are created. Modern treatment of selective mutism includes an eclectic approach and emphasizes the role of teachers and school in general. Future studies should deepen the knowledge about selective mutism, specify the methodological procedure and stimulate the individualized treatment of children with SM.

  4. The Consumer Rights Directive

    NARCIS (Netherlands)

    Luzak, J.A.; Mak, V.; Hartkamp, A.S.; Sieburgh, C.H.; Keus, L.A.D.; Kortmann, J.S.; Wissink, M.H.

    2014-01-01

    This contribution discusses the impact of the CRD on Dutch private law. How will the new directive influence consumer rights and how does this fit with existing law? Considering the background of the directive and its importance for European consumer law, however, we discuss these questions in the

  5. Direct RF modulation transmitter

    NARCIS (Netherlands)

    Fukuda, Shuichi; Nauta, Bram

    2013-01-01

    PROBLEM TO BE SOLVED: To provide a direct RF modulation transmitter capable of saving more power consumption. SOLUTION: The direct RF modulation transmitter comprises: a passive mixer circuit 100 which inputs digital baseband data D of 1 bit, inverted data DN, a first RF signal, and a second RF

  6. Time for a Change; Spirit's View on Sol 1843

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Spirit used its navigation camera to take the images that have been combined into this full-circle view of the rover's surroundings during the 1,843rd Martian day, or sol, of Spirit's surface mission (March 10, 2009). South is in the middle. North is at both ends. The rover had driven 36 centimeters downhill earlier on Sol 1854, but had not been able to get free of ruts in soft material that had become an obstacle to getting around the northeastern corner of the low plateau called 'Home Plate.' The Sol 1854 drive, following two others in the preceding four sols that also achieved little progress in the soft ground, prompted the rover team to switch to a plan of getting around Home Plate counterclockwise, instead of clockwise. The drive direction in subsequent sols was westward past the northern edge of Home Plate. This view is presented as a cylindrical projection with geometric seam correction.

  7. Idiopathic subglottic stenosis in pregnancy: A deceptive laryngoscopic view

    Directory of Open Access Journals (Sweden)

    John George Karippacheril

    2011-01-01

    Full Text Available A 28-year-old lady with term gestation, pre-eclampsia and a vague history of occasional breathing difficulty, on irregular bronchodilator therapy, was scheduled for category 1 lower segment caesarean section in view of foetal distress. A Cormack-Lehane grade 1 direct laryngoscopic view was obtained following rapid sequence induction. However, it was not possible to insert a 7.0 or 6.0 size styleted cuffed tracheal tube in two attempts. Ventilation with a supraglottic device was inadequate. Airway was secured with a 4.0 size microlaryngeal surgery tube with difficulty. Computed tomography scan of the neck following tracheostomy for failed extubation revealed subglottic stenosis (SGS with asymmetric arytenoid calcification. This report describes the management of a rare case of unrecognised idiopathic SGS in pregnancy.

  8. Directionality effects in percolation

    Science.gov (United States)

    Redner, Sidney

    The percolation properties of random networks containing resistors (two-way streets) and/or diodes (one-way streets) are considered. The directionality constraints of the diodes are found to lead to novel geometrical behavior. As a simple example, various random cluster models with a preferred direction, such as directed random walks or directed lattice animals, are shown to be anisotropic in character. The critical behavior of directed percolation is then treated and its connection with branching Markov processes is explained. A closely related "reverse" percolation problem, a transition from one-way percolation to isotropic percolation, is introduced. Finally, the geometrical properties of a network containing arbitrarily oriented diodes are treated. Symmetry and duality arguments are applied to yield exact results for certain aspects of its critical behavior.

  9. Genre-Specific Cultivation Effects: Lagged Associations between Overall TV Viewing, Local TV News Viewing, and Fatalistic Beliefs about Cancer Prevention.

    Science.gov (United States)

    Lee, Chul-Joo; Niederdeppe, Jeff

    2011-12-01

    Cultivation theory and research has been criticized for its failure to consider variation in effects by genre, employ appropriate third-variable controls, and determine causal direction. Recent studies, controlling for a variety of demographic characteristics and media use variables, have found that exposure to local television (TV) newscasts is associated with a variety of problematic "real-world" beliefs. However, many of these studies have not adequately assessed causal direction. Redressing this limitation, we analyzed data from a two-wave national representative survey which permitted tests of lagged association between overall TV viewing, local TV news viewing, and fatalistic beliefs about cancer prevention. We first replicated the original cultivation effect and found a positive association between overall TV viewing at time 1 and increased fatalistic beliefs about cancer prevention at time 2. Analyses also provided evidence that local TV news viewing at time 1 predicts increased fatalistic beliefs about cancer prevention at time 2. There was little evidence for reverse causation in predicting changes in overall TV viewing or local TV news viewing. The paper concludes with a discussion of theoretical and practical implications of these findings.

  10. Hubble's Sharpest View Of Mars

    Science.gov (United States)

    1997-01-01

    The sharpest view of Mars ever taken from Earth was obtained by the recently refurbished NASA Hubble Space Telescope (HST). This stunning portrait was taken with the HST Wide Field Planetary Camera-2 (WFPC2) on March 10, 1997, just before Mars opposition, when the red planet made one of its closest passes to the Earth (about 60 million miles or 100 million km).At this distance, a single picture element (pixel) in WFPC2's Planetary Camera spans 13 miles (22 km) on the Martian surface.The Martian north pole is at the top (near the center of the bright polar cap) and East is to the right. The center of the disk is at about 23 degrees north latitude, and the central longitude is near 305 degrees.This view of Mars was taken on the last day of Martian spring in the northern hemisphere (just before summer solstice). It clearly shows familiar bright and dark markings known to astronomers for more than a century. The annual north polar carbon dioxide frost (dry ice) cap is rapidly sublimating (evaporating from solid to gas), revealing the much smaller permanent water ice cap, along with a few nearby detached regions of surface frost. The receding polar cap also reveals the dark, circular sea of sand dunes that surrounds the north pole (Olympia Planitia).Other prominent features in this hemisphere include Syrtis Major Planitia, the large dark feature seen just below the center of the disk. The giant impact basin Hellas (near the bottom of the disk) is shrouded in bright water ice clouds. Water ice clouds also cover several great volcanos in the Elysium region near the eastern edge of the planet (right). A diffuse water ice haze covers much of the Martian equatorial region as well.The WFPC2 was used to monitor dust storm activity to support the Mars Pathfinder and Mars Global Surveyor Orbiter Missions, which are currently en route to Mars. Airborne dust is most easily seen in WFPC2's red and near-infrared images. Hubble's 'weather report' from these images in invaluable for

  11. THE CONFLICT BETWEEN THE TRUE AND FAIR VIEW AND THE PRUDENCE IN ROMANIAN ACCOUNTING

    Directory of Open Access Journals (Sweden)

    Violeta Isai

    2015-05-01

    Full Text Available In the accounts of Romania, the principle of true and fair view and the prudence principle are in a relationship of mutual conditioning. True and fair view has its origins in Anglo-Saxon accounting, the British, and English translation of the expression is "true and fair view". In the context of Romania's national, a first reference to the concept of true and fair view a we identify in the root Accounting Law No 82/1991 which lays down that objective accounting- ensuring accurate image, clear, and complete heritage of the financial situation and the results. Prudence is to be found in sincerity (in the direction of the present in the financial statements facts which might influence the recipient information and should serve the concept of true and fair view.

  12. Automated otolith image classification with multiple views: an evaluation on Sciaenidae.

    Science.gov (United States)

    Wong, J Y; Chu, C; Chong, V C; Dhillon, S K; Loh, K H

    2016-08-01

    Combined multiple 2D views (proximal, anterior and ventral aspects) of the sagittal otolith are proposed here as a method to capture shape information for fish classification. Classification performance of single view compared with combined 2D views show improved classification accuracy of the latter, for nine species of Sciaenidae. The effects of shape description methods (shape indices, Procrustes analysis and elliptical Fourier analysis) on classification performance were evaluated. Procrustes analysis and elliptical Fourier analysis perform better than shape indices when single view is considered, but all perform equally well with combined views. A generic content-based image retrieval (CBIR) system that ranks dissimilarity (Procrustes distance) of otolith images was built to search query images without the need for detailed information of side (left or right), aspect (proximal or distal) and direction (positive or negative) of the otolith. Methods for the development of this automated classification system are discussed. © 2016 The Fisheries Society of the British Isles.

  13. CRISM Views Phobos and Deimos

    Science.gov (United States)

    2007-01-01

    These two images taken by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) show Mars' two small moons, Phobos and Deimos, as seen from the Mars Reconnaissance Orbiter's low orbit around Mars. Both images were taken while the spacecraft was over Mars' night side, with the spacecraft turned off its normal nadir-viewing geometry to glimpse the moons. The image of Phobos, shown at the top, was taken at 0119 UTC on October 23 (9:19 p.m. EDT on Oct. 22), and shows features as small as 400 meters (1,320 feet) across. The image of Deimos, shown at the bottom, was taken at 2016 UTC (12:16 p.m. EDT) on June 7, 2007, and shows features as small as 1.3 kilometers (0.8 miles) across. Both CRISM images were taken in 544 colors covering 0.36-3.92 micrometers, and are displayed at twice the size in the original data for viewing purposes. Phobos and Deimos are about 21 and 12 kilometers (13.0 and 7.5 miles) in diameter and orbit Mars with periods of 7 hours, 39.2 minutes and 1 day, 6 hours, 17.9 minutes respectively. Because Phobos orbits Mars in a shorter time than Mars' 24 hour, 37.4-minute rotational period, to an observer on Mars' surface it would appear to rise in the west and set in the east. From Mars' surface, Phobos appears about one-third the diameter of the Moon from Earth, whereas Deimos appears as a bright star. The moons were discovered in 1877 by the astronomer Asaph Hall, and as satellites of a planet named for the Roman god of war, they were named for Greek mythological figures that personify fear and terror. The first spacecraft measurements of Phobos and Deimos, from the Mariner 9 and Viking Orbiter spacecraft, showed that both moons have dark surfaces reflecting only 5 to 7% of the sunlight that falls on them. The first reconstruction of the moons' spectrum of reflected sunlight was a difficult compilation from three different instruments, and appeared to show a flat, grayish spectrum resembling carbonaceous chondrite meteorites. Carbonaceous

  14. Early childhood television viewing predicts explosive leg strength and waist circumference by middle childhood

    OpenAIRE

    Fitzpatrick Caroline; Pagani Linda S; Barnett Tracie A

    2012-01-01

    Abstract Background The relationship between early childhood television viewing and physical fitness in school age children has not been extensively studied using objective outcome measures. Methods Using a sample of 1314 children from the Québec Longitudinal Study of Child Development, we examine the association between parental reports of weekly hours of television viewing, assessed at 29 and 53 months of age, and direct measures of second grade muscular fitness using performances on the st...

  15. The impact of demographic and psychological characteristics and cost behaviors on views towards the luxury restaurant

    OpenAIRE

    Nazanin Haji Mirza Hossein Yazdi

    2017-01-01

    This study examines the impact of psychological characteristics, materialism, unity, uniqueness, hedonism, and perfectionism, and demographic characteristics including gender, age and income as well as the costing behavior (price) on the views towards the luxury restaurant. The results show that perfectionism and uniqueness had a direct impact on the consumer's views towards luxury restaurant. On the other hand, the demographic characteristics such as age, income and education had a positive ...

  16. DIRECTIONS AND CHALLENGES IN GLOBAL AGRICULTURE

    Directory of Open Access Journals (Sweden)

    Daniela POPA

    2013-01-01

    Full Text Available The development of global agricultural market has been at the forefront of professional studies. Expert opinions have quite differing views as to whether the world’s food production will be able to supply the huge demand of growing population. This scientific paper provides a general overview of global agricultural directions, including views on whether agricultural productivity increases will be able to keep with food demand increases and price trends. The scientific paper has focused on the present state of the agricultural market and on the analysis of the key factors defining the tasks of the agricultural sector in the near future, with a special attention to the case of Republic of Moldova.

  17. Is direct measurement of time possible?

    Science.gov (United States)

    Reynolds, Thomas

    2017-08-01

    Is direct measurement of time possible? The answer to this question may depend upon how one understands time. Is time an essential constituent of physical reality? Or is what scientists are talking about when they use the symbol ‘t’ or the word ‘time’ an human cultural construct, as the Chief of the USA NIST Divisions of Time and Frequency and of Quantum Physics has suggested. Few aspects of physics do not reference activity to time, but many discussions within either view of time seem to use one same, largely traditional, language of time. Briefly considering the question of measurement, including from a formal measure-theoretic point of view, clarifies the situation.

  18. An Update on ConSys Including a New LabVIEW FPGA Based LLRF System

    DEFF Research Database (Denmark)

    Worm, Torben; Nielsen, Jørgen S.

    Sys is a standard publisher/subscriber system, where all nodes can act both as client and server. One very strong feature is the easy ability to make virtual devices (devices which do not depend on hardware directly, but combine hardware parameters.) For ASTRID2 a new LabVIEW based Low-Level RF system has been made...... live plots from the regulation loops are implemented in a host program on Windows. All three levels have been implemented with LabVIEW. The LLRF system is interfaced to ConSys through LabVIEW shared variables....

  19. Direction of time

    International Nuclear Information System (INIS)

    Mirman, R.

    1975-01-01

    The meaning of the phrase ''the direction of time'' and the physical problems involved are considered. These problems are discussed, and plausibility arguments are given to show that all clocks run in the same direction (almost always), that the most probable development of the universe during the early stages of the expansion would result in the introduction of some internal organization, and that the expansion of the universe and the increase in entropy define time directions that have the same sense. The question of what properties of the laws governing the universe lead to these results is studied

  20. Two Views of Public Participation

    International Nuclear Information System (INIS)

    Blackman, H. S.; Harbour, J. L.

    2002-01-01

    Risk perception has been studied extensively over the past several decades. This research has defined the differences that exist between and among various groups as defined by their education, interests, geographic distribution, and beliefs. It has also been repeatedly demonstrated that various public groups can and do have a tremendous impact on decisions made in the public and private sectors. Involved citizens for example, have caused international corporations as well as the Department of Energy to change or even reverse a chosen course of action. A frequent cause of such reversals is attributed to a lack of involvement of the public and other key decision players directly in the decision process itself. Through our research and case studies, we have developed both an ''as is'' and a ''participatory'' model of decision-making process. The latter decision model allows the direct involvement of important player groups. The paper presents and discusses these models in theoretical and practical terms taken from case studies of the Brent Spar disposal in the North Atlantic, and the use of incineration as a method of waste treatment at the Idaho National Engineering Laboratory. Results from the case studies are used to demonstrate why the ''as is'' model accurately describes the current situation, and how the ''participatory model'' will allow decisions to be made that are publicly supported and can be implemented. The use of such a model will provide users a framework from which to successfully make progress in a wide range of environmental endeavors cooperatively with the public, rather than in spite of the public

  1. Light Pollution: The Global View

    Science.gov (United States)

    Schwarz, H. E.

    2003-04-01

    al.), an overview of the work on radio frequency protection of sites (Cohen et al.) and the excellent introduction to the topic from the Chilean point of view (Daud). Related topics in the book are light pollution education, aircraft contrails, space advertising (with an added document provided by the relevant UN commission), and an experiment on involving the population of an entire country in measuring sky brightness, by using the internet and the media. The text is aimed at professionals from a wide range of disciplines related to lighting and its effects on the night-time environment in the broadest sense of the word. Lay persons interested in this emerging multi-disciplinary field can also find much of interest in this book. Link: http://www.wkap.nl/prod/b/1-4020-1174-1

  2. MISR Views the Middle East

    Science.gov (United States)

    2000-01-01

    This image, generated using 16 orbits of MISR data collected between August 16 and August 30, 2000, takes us to the cradle of many civilizations. The data are from the 60-degree aftward-viewing camera. Because the individual orbit swaths are only 400 kilometers wide, they were 'mosaiced' together to form this composite picture, which covers about 2700 kilometers from west to east and 1750 kilometers from north to south. A few discontinuities are present in the mosaic, particularly near clouds, due to changes in the scene which occurred between dates when the individual orbit data were acquired.At the northern tip of the Red Sea, the Gulf of Suez and the Gulf of Aqaba frame the sandy deserts and spectacular mountains of the Sinai Peninsula. The highest peaks are Gebel Katherina (Mountain of St. Catherine, 2637 meters) and Gebel Musa (Mountain of Moses, also known as Mount Sinai, 2285 meters). To the northeast, Israel and Jordan flank the Dead Sea, one of the saltiest inland water bodies in the world. At its northern edge is Qumran, where the ancient Scrolls were discovered; the city of Jerusalem lies about 30 kilometers to the west.Several large rivers are prominent. Flowing southeastward through Iraq are the Tigris and Euphrates. The dark area between the two rivers, northwest of the Persian Gulf, is a very fertile region where fishing and farming are prevalent. Wending its way through eastern Egypt is the Nile. In the south is Lake Nasser and the Aswan Dam; continuing northward the Nile passes the Temple of Luxor as it sharply loops to the east. It then turns west and northward, eventually passing the capital city of Cairo, and finally spreading into a prominent delta as it empties into the Mediterranean Sea. The bright dot just west of the apex of the delta marks the location of the great Pyramids and Sphinx complexes on the Giza Plateau. On the coast, west of the delta, is the ancient city of Alexandria, Egypt's main seaport.'MISR', as it turns out, is the

  3. [The demographer's point of view].

    Science.gov (United States)

    Arias De Blois, J

    1993-03-01

    Although the predictable consequence of the acceleration of world population growth were foreseen 40 years ago, the need for population education did not become obvious until much later. Only in the 1960s did a number of countries become aware of changes in population dynamics and their implications for the quality of life and for socioeconomic development goals. Population phenomena and their implications are almost as poorly understood by most persons today as they were when the first population policies were announced. Population education has been viewed as a means of achieving a better understanding of population phenomena. It is believed that acquiring knowledge of population phenomena will promote responsible decision making on questions related to population problems. The early preoccupation in population education with fertility and family planning aroused considerable resistance. There is still strong resistance to including population dynamics and their implications in educational programs. But the most exclusive interest in family planning as a means of reducing the population explosion has broadened in response to a number of events including recognition of family planning as a human right, studies of the effects of high fertility on maternal-child health and education, the mortality decline in developing countries, and the strong increase in migratory movements resulting from urbanization and other causes. The university teaching of demography has become important only recently, and population education at the elementary and secondary level is more recent still. Each educational system must decide for itself the best bode of integrating demographic themes into the different disciplines. The principal demographic themes that should be incorporated will generally fit into existing programs of study. Because of the dynamic nature of demographic phenomena, the content of population education should be reviewed periodically with the assistance of a

  4. Effects of Talk Show Viewing on Adolescents.

    Science.gov (United States)

    Davis, Stacy; Mares, Marie-Louise

    1998-01-01

    Investigates the effects of talk-show viewing on high-school students' social-reality beliefs. Supports the hypothesis that viewers overestimate the frequency of deviant behaviors; does not find support for the hypothesis that viewers become desensitized to the suffering of others; and finds that talk-show viewing was positively related, among…

  5. Programming Arduino with LabVIEW

    CERN Document Server

    Schwartz, Marco

    2015-01-01

    If you already have some experience with LabVIEW and want to apply your skills to control physical objects and make measurements using the Arduino sensor, this book is for you. Prior knowledge of Arduino and LabVIEW is essential to fully understand the projects detailed in this book.

  6. Lecturers' Views on Ghana's Undergraduate Mathematics Education

    Science.gov (United States)

    Assuah, Charles; Ayebo, Abraham

    2015-01-01

    This paper synthesizes the views of 6 university lecturers on Ghana's undergraduate mathematics education. These views were expressed during a mathematics workshop sensitization program on the "contribution of undergraduate mathematics education to the Ghanaian economy." The data consisting of open-ended questions followed by…

  7. Young people’s own museum views

    DEFF Research Database (Denmark)

    Drotner, Kirsten; Knudsen, Line Vestergaard; Mortensen, Christian Hviid

    2017-01-01

    Taking a mixed-methods, visitor-focused approach to views on museums, this article examines what views young Danes aged 13–23 years (n = 2,350) hold on museums and how these views can be categorized and articulated. Arguing that studying views of museums as socially situated meaning-making practi......Taking a mixed-methods, visitor-focused approach to views on museums, this article examines what views young Danes aged 13–23 years (n = 2,350) hold on museums and how these views can be categorized and articulated. Arguing that studying views of museums as socially situated meaning......-making practices adds theoretical and empirical depth to existing research and practice, we apply semantic categorization, speech-act theory, and cognitive linguistics as analytical tools. Our results demonstrate that respondents’ most prevalent semantic categories are ‘exciting,’ ‘educative,’ and ‘boring.......’ Their responses fall into two main types: assertive speech acts providing factual descriptions and expressive speech acts providing more evaluative judgments. In general, young Danes make sense of museums along three different routes. One group wants museums that expand and challenge prior perceptions...

  8. Television Viewing and Public Perceptions of Attorneys.

    Science.gov (United States)

    Pfau, Michael; And Others

    1995-01-01

    Examines theoretical and methodological controversies identified with the cultivation explanation of the way television shapes perceptions of social reality. Finds that content-specific viewing is a more reliable predictor than total viewing or select viewer sociodemographic variables of the public's tendency to perceive attorneys in the same way…

  9. How Justice System Officials View Wrongful Convictions

    Science.gov (United States)

    Smith, Brad; Zalman, Marvin; Kiger, Angie

    2011-01-01

    The wrongful conviction of factually innocent people is a growing concern within the United States. Reforms generated by this concern are predicated in part on the views of justice system participants. The authors surveyed judges, police officials, prosecutors, and defense lawyers in Michigan regarding their views of why wrongful convictions…

  10. Students' Views of Learning in Vocational Education.

    Science.gov (United States)

    Eklund-Myrskog, Gunilla

    1997-01-01

    Conceptions of learning and approaches to learning within vocational education were studied with 30 Finnish students of automotive mechanics. About half the students took a quantitative view of learning and favored a surface approach. Encouraging a qualitative view of learning and deeper approaches in vocational education is discussed. (SLD)

  11. Consumer Views: Importance of Fuel Economy

    Energy Technology Data Exchange (ETDEWEB)

    Singer, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-04-11

    This presentation includes data captured by the National Renewable Energy Laboratory (NREL) to support the U.S. Department of Energy's Vehicle Technologies Office (VTO) research efforts. The data capture consumer views on the importance of fuel economy amongst other vehicle attributes and views on which alternative fuel types would be the best and worst replacements for gasoline.

  12. Modeling traceability of concerns in architectural views

    NARCIS (Netherlands)

    Tekinerdogan, B.; Hofmann, C.; Aksit, Mehmet

    2007-01-01

    Software architecture modeling includes the description of different views that represent the architectural concerns from different stakeholder perspectives. In case of evolution of the software system the related architectural views need to be adapted accordingly. For this it is necessary that the

  13. Advance Directives - Multiple Languages

    Science.gov (United States)

    ... Expand Section Advance Directives - 简体中文 (Chinese, Simplified (Mandarin dialect)) Bilingual PDF Health Information Translations Chinese, Traditional (Cantonese dialect) (繁體中文) Expand Section Advance ...

  14. Direct Conversion of Energy

    Energy Technology Data Exchange (ETDEWEB)

    Corliss, William R

    1964-01-01

    Topics include: direct versus dynamic energy conversion; laws governing energy conversion; thermoelectricity; thermionic conversion; magnetohydrodynamic conversion; chemical batteries; the fuel cell; solar cells; nuclear batteries; and advanced concepts including ferroelectric conversion and thermomagnetic conversion.

  15. View Ahead After Spirit's Sol 1861 Drive

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Spirit used its navigation camera to take the images combined into this 210-degree view of the rover's surroundings during the 1,861st to 1,863rd Martian days, or sols, of Spirit's surface mission (March 28 to 30, 2009). The center of the scene is toward the south-southwest. East is on the left. West-northwest is on the right. The rover had driven 22.7 meters (74 feet) southwestward on Sol 1861 before beginning to take the frames in this view. The drive brought Spirit past the northwestern corner of Home Plate. In this view, the western edge of Home Plate is on the portion of the horizon farthest to the left. A mound in middle distance near the center of the view is called 'Tsiolkovsky' and is about 40 meters (about 130 feet) from the rover's position. This view is presented as a cylindrical projection with geometric seam correction.

  16. LabVIEW 8 student edition

    CERN Document Server

    Bishop, Robert H

    2007-01-01

    For courses in Measurement and Instrumentation, Electrical Engineering lab, and Physics and Chemistry lab. This revised printing has been updated to include new LabVIEW 8.2 Student Edition. National Instruments' LabVIEW is the defacto industry standard for test, measurement, and automation software solutions. With the Student Edition of LabVIEW, students can design graphical programming solutions to their classroom problems and laboratory experiments with software that delivers the graphical programming capabilites of the LabVIEW professional version. . The Student Edition is also compatible with all National Instruments data acquisition and instrument control hardware. Note: The LabVIEW Student Edition is available to students, faculty, and staff for personal educational use only. It is not intended for research, institutional, or commercial use. For more information about these licensing options, please visit the National Instruments website at (http:www.ni.com/academic/)

  17. Directed GF-spaces

    Directory of Open Access Journals (Sweden)

    F.G. Arenas

    2001-10-01

    Full Text Available In this paper we introduce the concept of directed fractal structure, which is a generalization of the concept of fractal structure (introduced by the authors. We study the relation with transitive quasiuniformities and inverse limits of posets. We define the concept of GF-compactification and apply it to prove that the Stone-Cech compactification can be obtained as the GF-compactification of the directed fractal structure associated to the Pervin quasi-uniformity.

  18. Development Directions For CANDU and Slowpoke Reactors

    International Nuclear Information System (INIS)

    Brooks, Gordon L.

    1990-01-01

    This paper provides a broader-based discussion of overall development directions foreseen for CANDU reactors, particularly those which have further evolved sine the earlier paper. The paper then discusses development directions for the Slowpokes Energy System which is a small nuclear heat source intended to meet local heating needs for building complexes and municipal heating systems. In evolving a sound development direction, it is necessary, firstly, to address the question of requirements, viz., what are the requirements which future nuclear power plants must satisfy if they are to be successful? Today, some in the nuclear industry believe that the most important of such requirements relates to the need for 'safer' reactors. Indeed, some proponents of this view would seem to suggest that if only we could develop such 'safer' reactors, suddenly all of our problem s with public acceptance would disappear and utilities would form long lines waiting to purchase such marvellous machines. I do not share such a simplistic view nor, indeed, do many of my colleagues in the international nuclear power industry

  19. View Factor of Solar Chimneys by Monte Carlo Method

    DEFF Research Database (Denmark)

    Hosseini, Seyed Mojtaba Mir; Rezaniakolaei, Alireza; Rosendahl, Lasse Aistrup

    2017-01-01

    A typical solar chimney power plant (SCPP) system mainly contains three components, namely, solar collector, tower and turbine. The collector heats up ambient air entering to the system by buoyancy force. Updraft airflow is then generated in the chimney and drives the pressure-staged turbine...... in the chimney base to generate electricity or ventilation of buildings. A part of the solar radiation is absorbed by solar collector directly, which is greater than which reflected by collector to the tower. But this amount of reflection can enhance the efficiency of the system. Determining more precise view...

  20. Electrical features of new DNC, CNC system viewed

    Science.gov (United States)

    Fritzsch, W.; Kochan, D.; Schaller, J.; Zander, H. J.

    1985-03-01

    Control structures capable of solving the problems of a flexible minial-labor manufacturing process are analyzed. The present state of development of equipment technology is described, and possible ways of modeling control processes are surveyed. Concepts which are frequently differently interpreted in various specialized disciplines are systematized, with a view toward creating the prerequisites for interdisciplinary cooperation. Problems and information flow during the preparatory and performance phases of manufacturing are examined with respect to coupling CAD/CAM functions. Mathematical modeling for direct numerical control is explored.

  1. Directional gear ratio transmissions

    Science.gov (United States)

    Lafever, A. E. (Inventor)

    1984-01-01

    Epicyclic gear transmissions which transmit output at a gear ratio dependent only upon the input's direction are considered. A transmission housing envelops two epicyclic gear assemblies, and has shafts extending from it. One shaft is attached to a sun gear within the first epicyclic gear assembly. Planet gears are held symmetrically about the sun gear by a planet gear carrier and are in mesh with both the sun gear and a ring gear. Two unidirectional clutches restrict rotation of the first planet gear carrier and ring gear to one direction. A connecting shaft drives a second sun gear at the same speed and direction as the first planet gear carrier while a connecting portion drives a second planet gear carrier at the same speed and direction as the first ring gear. The transmission's output is then transmitted by the second ring gear to the second shaft. Input is transmitted at a higher gear ratio and lower speed for all inputs in the first direction than in the opposite direction.

  2. No harm, no foul?: Expert views on the future direction of marine antibiofouling technologies

    OpenAIRE

    Larsson, L. M.; Vandeleur, H. M.; Nyden, M.; Styan, C. A.

    2016-01-01

    The colonisation of submerged surfaces by marine fouling organisms is a global problem with impacts ranging from clogged pipelines and aquaculture nets through to hull fouling that increases fuel costs and green-house gas emissions and provide potential habitats for invasive species. Marine antibiofouling techniques, such as copper plates on ships and functional coatings that release toxic biocides, were historically developed in order to reduce the frequency and expense of the physical remov...

  3. A service laboratory's view of the status and direction of reactor vessel surveillance

    International Nuclear Information System (INIS)

    Norris, E.B.

    1981-01-01

    Advances in testing techniques and analysis procedures have had a minor impact to date on the conduct of reactor vessel material surveillance programs. However, major thrusts in the near future will be associated with the development of elastic-plastic fracture toughness data on irradiated materials and improvements in analysis techniques for projecting surveillance results to the pressure vessel wall. In this regard, increased emphasis will be placed on the development of R-curves from the results of J-integral tests. Also, efforts will be increased to develop a better understanding of neutron irradiation embrittlement mechanisms, to determine if a time dependency of damage can lead to saturation and to evaluate the significance of small variations in irradiation temperature on the embrittlement response

  4. Point of View: Physiotherapy in Malawi – a step in the right direction ...

    African Journals Online (AJOL)

    Physiotherapists in Malawi are in short supply and the demand for this service is increasing. This profession is instrumental in the rehabilitation of patients following accident and disease. Early input from a physiotherapist can be life changing; for example, timely physiotherapy could prevent a patient from becoming ...

  5. Point of View: Physiotherapy in Malawi – a step in the right direction

    African Journals Online (AJOL)

    Due to the high HIV prevalence, spinal TB is much more frequently occurring when compared to a western industrialised country. It can affect any level of the spinal cord resulting in bilateral leg weakness. (paraplegia) or bilateral leg and arm weakness (tetraplegia). In principle, TB spine is a reversible condition but ...

  6. Networking: the view from HEP

    Science.gov (United States)

    McKee, Shawn

    2017-10-01

    Networks have played a critical role in high-energy physics (HEP), enabling us to access and effectively utilize globally distributed resources to meet the needs of our physicists. National and global-scale collaborations that characterize HEP would not be feasible without ubiquitous capable networks. Because of their importance in enabling our grid computing infrastructure many physicists have taken leading roles in research and education (R&E) networking, participating in, and even convening, network related meetings and research programs with the broader networking community worldwide. This has led to HEP benefiting from excellent global networking capabilities for little to no direct cost. However, as other science domains ramp-up their need for similar networking it becomes less clear that this situation will continue unchanged. This paper will briefly discuss the history of networking in HEP, the current activities and challenges we are facing, and try to provide some understanding of where networking may be going in the next 5 to 10 years.

  7. [Current views of nutritional therapy].

    Science.gov (United States)

    Pogozheva, A V; Kaganov, B S

    2009-01-01

    Epidemiologic studies in the Research Institute of Nutrition showed that dietary patterns of the Russian population are on the whole at variance with the balanced feeding formula largely due to excessive consumption of animal fat, insufficient consumption of proteins, vitamins, micro- and macroelements, polyunsaturated fatty acids, and dietary fibers. It is estimated that over 70% of total lethality in this country is due to diseases directly related to improper feeding (the so-called alimentary-dependent diseases), cardiovascular disorders, some neoplasms, diabetes mellitus, etc. Dietary therapy adjusted to specific pathogenetic features, clinical picture, stage of the disease, character of metabolic disorders in individual patients is an important factor having versatile beneficial effects on the patient's health, correcting metabolic problems, and improving quality of life. Decree No 330 of August 5, 2003 "On measures to improve nutritional therapy in medical institutions of the Russian Federation" introduced a new nomenclature of standard diets based on chemical composition of separate foods and the previously used system of numbered diets. Modern dietary therapy includes not only standard and special diets but also specific products to be used in concrete clinical conditions, enteral and parenteral nutrition, biologically active food additives, etc.

  8. An approach to computing direction relations between separated object groups

    Science.gov (United States)

    Yan, H.; Wang, Z.; Li, J.

    2013-09-01

    Direction relations between object groups play an important role in qualitative spatial reasoning, spatial computation and spatial recognition. However, none of existing models can be used to compute direction relations between object groups. To fill this gap, an approach to computing direction relations between separated object groups is proposed in this paper, which is theoretically based on gestalt principles and the idea of multi-directions. The approach firstly triangulates the two object groups, and then it constructs the Voronoi diagram between the two groups using the triangular network. After this, the normal of each Voronoi edge is calculated, and the quantitative expression of the direction relations is constructed. Finally, the quantitative direction relations are transformed into qualitative ones. The psychological experiments show that the proposed approach can obtain direction relations both between two single objects and between two object groups, and the results are correct from the point of view of spatial cognition.

  9. Incidences de l'investissement étranger direct (IED) sur la pauvreté ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Foreign Direct Investment Behaviour in Low and Middle Income Countries. This project will examine the impact of foreign direct investment (FDI) on economic efficiency, poverty and inequality in low- and middle-income countries. View moreForeign Direct Investment Behaviour in Low and Middle Income Countries ...

  10. The activity view of inner speech

    Directory of Open Access Journals (Sweden)

    Fernando eMartínez-Manrique

    2015-03-01

    Full Text Available We distinguish two general approaches to inner speech (IS –the ‘format’ and the ‘activity’ views–, and defend the activity view. The format view grounds the utility of IS on features of the representational format of language, and is related to the thesis that the proper function of IS is to make conscious thinking possible. IS appears typically as a product constituted by representations of phonological features. The view also has implications for the idea that passivity phenomena in cognition may be misattributed IS. The activity view sees IS as a speaking activity that does not have a proper function in cognition. It simply inherits the array of functions of outer speech. We argue that it is methodologically advisable to start from this variety of uses, which suggests commonalities between internal and external activities. The format view has several problems; it has to deny unsymbolized thinking; it cannot easily explain how IS makes thoughts available to consciousness, and it cannot explain those uses of IS where its format features apparently play no role. The activity view not only lacks these problems but also has explanatory advantages: construing IS as an activity allows it to be integrally constituted by its content; the view is able to construe unsymbolized thinking as part of a continuum of phenomena that exploit the same mechanisms, and it offers a simple explanation for the variety of uses of IS.

  11. MAPCERN links to Google Street View

    CERN Multimedia

    Matilda Heron

    2015-01-01

    CERN’s online maps, MAPCERN, now have the added bonus of Google Street View, thanks to the new release of images of many CERN sites captured by Google.   New Street View images of CERN sites have been added to MAPCERN, see bottom-right-hand image in the screenshot above.   Google Street View, an integrated service of Google Maps introduced in 2007, links 360-degree panoramic photos into a virtual tour. CERN and Google began collaborating on this Street View project in 2010 and now these Street View images have been embedded into MAPCERN, accessible by clicking the “Street View” tab in MAPCERN’s bottom-right-hand window. If you need to locate a building at CERN, or plan an operation on some equipment, you can save time by using the Street View images to check out the area in advance. The CERN Meyrin site has been fully mapped, as well as the surfaces of the eight LHC points, BA2 and BA3. New Street View images of CERN, including the Pr...

  12. Damping test results for straight sections of 3-inch and 8-inch unpressurized pipes. [PWR; BWR

    Energy Technology Data Exchange (ETDEWEB)

    Ware, A.G.; Thinnes, G.L.

    1984-04-01

    EG and G Idaho is assisting the Nuclear Regulatory Commission and the Pressure Vessel Research Committee in supporting a final position on revised damping values for structural analyses of nuclear piping systems. As part of this program, a series of vibrational tests on unpressurized 3-in. and 8-in. Schedule 40 carbon steel piping was conducted to determine the changes in structural damping due to various parametric effects. The 33-ft straight sections of piping were supported at the ends. Additionally, intermediate supports comprising spring, rod, and constant-force hangers, as well as a sway brace and snubbers, were used. Excitation was provided by low-force-level hammer impacts, a hydraulic shaker, and a 50-ton overhead crane for snapback testing. Data was recorded using acceleration, strain, and displacement time histories. This report presents test results showing the effect of stress level and type of supports on structural damping in piping.

  13. Damping test results for straight sections of 3-inch and 8-inch unpressurized pipes

    International Nuclear Information System (INIS)

    Ware, A.G.; Thinnes, G.L.

    1984-04-01

    EG and G Idaho is assisting the Nuclear Regulatory Commission and the Pressure Vessel Research Committee in supporting a final position on revised damping values for structural analyses of nuclear piping systems. As part of this program, a series of vibrational tests on unpressurized 3-in. and 8-in. Schedule 40 carbon steel piping was conducted to determine the changes in structural damping due to various parametric effects. The 33-ft straight sections of piping were supported at the ends. Additionally, intermediate supports comprising spring, rod, and constant-force hangers, as well as a sway brace and snubbers, were used. Excitation was provided by low-force-level hammer impacts, a hydraulic shaker, and a 50-ton overhead crane for snapback testing. Data was recorded using acceleration, strain, and displacement time histories. This report presents test results showing the effect of stress level and type of supports on structural damping in piping

  14. Directed network modules

    International Nuclear Information System (INIS)

    Palla, Gergely; Farkas, Illes J; Pollner, Peter; Derenyi, Imre; Vicsek, Tamas

    2007-01-01

    A search technique locating network modules, i.e. internally densely connected groups of nodes in directed networks is introduced by extending the clique percolation method originally proposed for undirected networks. After giving a suitable definition for directed modules we investigate their percolation transition in the Erdos-Renyi graph both analytically and numerically. We also analyse four real-world directed networks, including Google's own web-pages, an email network, a word association graph and the transcriptional regulatory network of the yeast Saccharomyces cerevisiae. The obtained directed modules are validated by additional information available for the nodes. We find that directed modules of real-world graphs inherently overlap and the investigated networks can be classified into two major groups in terms of the overlaps between the modules. Accordingly, in the word-association network and Google's web-pages, overlaps are likely to contain in-hubs, whereas the modules in the email and transcriptional regulatory network tend to overlap via out-hubs

  15. Effects of viewed violence and aggression: stimulation and catharsis.

    Science.gov (United States)

    Manning, S A; Taylor, D A

    1975-01-01

    Tests of the catharsis hypothesis involving viewed violence have led to conflicting results. It was suggested that the inconsistencies were due in part to the use of two different types of response measures, aggressive responses and hostile responses. This study involved a direct comparison of the two types of responses under conditions of instigation versus no instigation and aggressive versus neutral film. It was hypothesized that viewing an aggressive film would lead to a decrease in hostile responses (catharsis) and an increase in aggressive responses (stimulation) when compared with a neutral film condition. It was also hypothesized that both stimulation and catharsis effects would be enhanced under instigation conditions. A main effect of instigation was found with subjects in the instigation condition having higher scores than those in the noninstigated condition. A main effect of film was found with subjects having lower scores in the aggressive film condition than in the neutral film condition. A significant Film times Response Outlet interaction was found which offered support for the predicted catharsis effect on the hostility measure. There was no support for the predicted stimulation effect on the aggression measure. The results of the study offer support for the main thesis that in examining the effects of viewed violence, separation of hostile responses and aggressive responses is necessary for full understanding.

  16. Scaling view by the Virtual Nature Systems

    Science.gov (United States)

    Klenov, Valeriy

    2010-05-01

    influences. However, the effect is the reliable Outstripping Monitoring for impending disasters and of other processes with satisfactory exactness. It was proved by direct validations (by use observed records). The conclusions are as follows: The ILL is mechanics for dissipation the Past and indeterminism the Future of the Nature. Moving back along the VNS' Phase Trajectory changes a view on natural records, and is chance to restore history of the ANS and its external drivers.

  17. Perceived Direction of Self-Motion from Orthogonally Directed Visual and Vestibular Stimulation in Passive and Active Observation

    Directory of Open Access Journals (Sweden)

    Kenzo Sakurai

    2011-10-01

    Full Text Available Perceiving the direction of self-motion is typically a multisensory process. The most effective cue to detect the observer's heading direction is the visual optic-flow pattern. In the initial period of body movement, however, the vestibular sense is another effective cue to detect the direction in which one's body started to move. Here I report our recent research on the perception of self-motion, 1 when observers are passively experiencing their real somatic motion in different body posture, and 2 when observers are actively moving their bodies forward and backward. Previously, we reported that when upright observers passively experience real linear oscillatory somatic motion (leftward/rightward or forward/backward while viewing orthogonal visual optic flow patterns (translating or expanding/contracting, their perceived body motion direction is intermediate to those specified by visual and vestibular information individually (Sakurai et al., 2002, ACV; 2003, ECVP; Sakurai et al., 2010, VSS; Kubodera et al., 2010, APCV. We then generalized those findings exploring other visual/vestibular combinations, investigating when the vertical axis of body coordinates is orthogonal to the gravity axis. Observers lay supinely and reported their perceived direction of self-motion, experiencing real upward/downward or leftward/rightward motion in body coordinates, while viewing orthogonal optic-flow patterns that were phase-locked to the swing motion. The results are very similar to our previous reports, but for combinations of body motion with visual expanding/contracting optic-flow, some observers' judgments were vision-only or vestibular-only, suggesting that multimodal integration in this context is an either-or process for these observers. Compared to our previous reports, one possible reason for this weighted combination failure is the discrepancy between body coordinates and gravity coordinates (Sakurai et al., 2011, ECVP. We recently extended those

  18. Directional radiometric measurements of row-crop temperatures

    Science.gov (United States)

    Kimes, D. S.; Kirchner, J. A.

    1983-01-01

    The variability of directional sensor response for a cotton row crop in Phoenix, Arizona was measured for various solar zenith angles. The geometric structure of the canopy was described with regard to height, width, spacing, and shape of rows. In addition, radiometric temperature data were collected on four scene components: sunlit and shaded vegetation and sunlit and shaded soil. These data were used to test the predictions and assumptions of a modified version of the row crop model of Jackson et al. (1979), which predicts the thermal infrared response of a sensor as a function of sensor view angle, component temperature, and geometrical structure of the canopy. The field data showed sensor response differentials as great as 16.2 C when going from a zenith view angle of 0 deg to one of 80 deg normal to the row direction. The rms deviation between the predicted and measured sensor response for all measurement periods and view angles was 0.96 C.

  19. Trust-based collective view prediction

    CERN Document Server

    Luo, Tiejian; Xu, Guandong; Zhou, Jia

    2013-01-01

    Collective view prediction is to judge the opinions of an active web user based on unknown elements by referring to the collective mind of the whole community. Content-based recommendation and collaborative filtering are two mainstream collective view prediction techniques. They generate predictions by analyzing the text features of the target object or the similarity of users' past behaviors. Still, these techniques are vulnerable to the artificially-injected noise data, because they are not able to judge the reliability and credibility of the information sources. Trust-based Collective View

  20. Implementing VMware Horizon View 5.2

    CERN Document Server

    Ventresco, Jason

    2013-01-01

    A step-by-step tutorial covering all components of the View Horizon suite in detail, to ensure that you can utilize all features of the platform, and discover all of the possible ways that it can be used within your own environment.If you are a newcomer in system administration, and you wish to implement a small to midsized Horizon View environment, then this book is for you. It will also benefit individuals who wish to administrate and manage Horizon View more efficiently or are studying for the VCP5-DT.

  1. Direct reading dosimeter

    International Nuclear Information System (INIS)

    Thomson, I.

    1985-01-01

    This invention is a direct reading dosimeter which is light, small enough to be worn on a person, and measures both dose rates and total dose. It is based on a semiconductor sensor. The gate threshold voltage change rather than absolute value is measured and displayed as a direct reading of the dose rate. This is effected by continuously switching the gate of an MOS transistor from positive to negative bias. The output can directly drive a digital readout or trigger an audible alarm. The sensor device can be a MOSFET, bipolar transistor, or MOSFET capacitor which has its electrical characteristics change due to the trapped charge in the insulating layer of the device

  2. DIRECT KICKS IN BOXING

    Directory of Open Access Journals (Sweden)

    Izet Kahrović

    2009-11-01

    Full Text Available Hit directly, giving any impact maximum muscle strength is skill, and it is neces- sary to the exercise and learning to make it perfect. Training begins with oral statement, so that students get to know with the techni- que that works. After oral exposure, it is necessary to create a good notion on technology that is adopted. The best way for the creation of good notion is a good demonstration. In direct training kicks in the box, you need patience and gradualness and there- fore uses a large number of additional exercises. In their work with beginners, in the first class, individual elements of technology, and also direct blow, it is necessary to separate the parts and run them on multiple commands, to later come to the confluence in one command. Direct wounds, with left and right hand, can be run from the towns, on the head and body, from the movement, to step forward, step back and step aside, the remedy to the left and right side. Left direct is taking out from a running protrusion hands, but kick, which is a pro- duct of the system, ankle-knee-pelvis and shoulder forward horizontaly. Set at the time of stripes, body weight over the left leg. Right direct from the place, starting ekscentrical reflecsive impuls of a extensor muscle in ankle, knee and joint of a hip.This kind of a sud- den movement is running simultaneously with the rotation of the body around vertical (longitudinal axis, with the transfer body weight on the left leg. Further movement to the hand which serves as a lever, which is transmitted through the power stroke

  3. Intensity and directionality of bat echolocation signals

    Directory of Open Access Journals (Sweden)

    Lasse eJakobsen

    2013-04-01

    Full Text Available The paper reviews current knowledge of intensity and directionality of bat echolocation signals. Recent studies have revealed that echolocating bats can be much louder than previously believed. Bats previously dubbed whispering can emit calls with source levels up to 110 dB SPL at 10 cm and the louder open space hunting bats have been recorded at above 135 dB SPL. This implies that maximum emitted intensities are generally 30 dB or more above initial estimates. Bats’ dynamic control of acoustic features also includes the intensity and directionality of their sonar calls. Aerial hawking bats will increase signal directionality in the field along with intensity thus increasing sonar range. During the last phase of prey pursuit, vespertilionid bats broaden their echolocation beam considerably, probably to counter evasive manoeuvres of eared prey. We highlight how multiple call parameters (frequency, duration, intensity and directionality of echolocation signals in unison define the search volume probed by bats and in turn how bats perceive their surroundings. Small changes to individual parameters can, in combination, drastically change the bat’s perception, facilitating successful navigation and food acquisition across a vast range of ecological niches. To better understand the function of echolocation in the natural habitat it is critical to determine multiple acoustic features of the echolocation calls. The combined (interactive effects, not only of frequency and time parameters, but also of intensity and directionality, define the bat’s view of its acoustic scene.

  4. Learning to trade via direct reinforcement.

    Science.gov (United States)

    Moody, J; Saffell, M

    2001-01-01

    We present methods for optimizing portfolios, asset allocations, and trading systems based on direct reinforcement (DR). In this approach, investment decision-making is viewed as a stochastic control problem, and strategies are discovered directly. We present an adaptive algorithm called recurrent reinforcement learning (RRL) for discovering investment policies. The need to build forecasting models is eliminated, and better trading performance is obtained. The direct reinforcement approach differs from dynamic programming and reinforcement algorithms such as TD-learning and Q-learning, which attempt to estimate a value function for the control problem. We find that the RRL direct reinforcement framework enables a simpler problem representation, avoids Bellman's curse of dimensionality and offers compelling advantages in efficiency. We demonstrate how direct reinforcement can be used to optimize risk-adjusted investment returns (including the differential Sharpe ratio), while accounting for the effects of transaction costs. In extensive simulation work using real financial data, we find that our approach based on RRL produces better trading strategies than systems utilizing Q-learning (a value function method). Real-world applications include an intra-daily currency trader and a monthly asset allocation system for the S&P 500 Stock Index and T-Bills.

  5. Critical review of directional neutron survey meters

    International Nuclear Information System (INIS)

    Balmer, Matthew J.I.; Gamage, Kelum A.A.; Taylor, Graeme C.

    2014-01-01

    Having been overlooked for many years, research is now starting to take into account the directional distribution of the neutron work place field. The impact of not taking this into account has led to overly conservative estimates of dose in neutron workplace fields. This paper provides a critical review of this existing research into directional survey meters which could improve these estimates of dose. Instruments which could be adapted for use as directional neutron survey meters are also considered within this review. Using Monte-Carlo techniques, two of the most promising existing designs are evaluated; a boron-doped liquid scintillator and a multi-detector directional spectrometer. As an outcome of these simulations, possible adaptations to these instruments are suggested with a view to improving the portability of the instrument. -- Highlights: • We critically review the existing literature into directional survey meters. • Instruments which could be adapted for this purpose are also reviewed. • Investigate the potential of much lighter portable real-time instrument. • Improvements to existing instruments are suggested to improve their design. • Boron-Doped liquid scintillator design is the most promising, but needs further work

  6. Directed flux motor

    Science.gov (United States)

    Wilson, Andrew (Inventor); Punnoose, Andrew (Inventor); Strausser, Katherine (Inventor); Parikh, Neil (Inventor)

    2011-01-01

    A directed flux motor described utilizes the directed magnetic flux of at least one magnet through ferrous material to drive different planetary gear sets to achieve capabilities in six actuated shafts that are grouped three to a side of the motor. The flux motor also utilizes an interwoven magnet configuration which reduces the overall size of the motor. The motor allows for simple changes to modify the torque to speed ratio of the gearing contained within the motor as well as simple configurations for any number of output shafts up to six. The changes allow for improved manufacturability and reliability within the design.

  7. Direct subdural scintigraphy

    Energy Technology Data Exchange (ETDEWEB)

    Keren, G.; Barzilay, Z.; Czerniak, P.; Cohen, B.E.

    1980-06-01

    We report a case of pneumococcal meningitis in an 8 weeks old female infant followed by persistent subdural effusion successsfully treated by repeated subdural taps. The initial delineation of the subdural effusion, the decrease in size and the disappearance of the fluid were demonstrated by direct subdural scintigraphy (D.S.S.). The literature of pneumoccocal meningitis, its diagnosis, treatment and complications are reviewed, and it is suggested that direct subdural scintigraphy should be employed as a diagnostic aid in the evaluation and follow up of subdural effusions.

  8. Handedness of direct photons

    International Nuclear Information System (INIS)

    Kopeliovich, B.Z.; Rezaeian, A.H.; Schmidt, Ivan

    2008-01-01

    The azimuthal asymmetry of direct photons originating from primary hard scatterings between partons is calculated. This can be accounted for by the inclusion of the color dipole orientation, which is sensitive to the rapid variation of the nuclear profile. To this end we introduce the dipole orientation within the saturation model of Golec-Biernat and Wuesthoff, while preserving all its features at the cross-section level. We show that the direct photon elliptic anisotropy v2 coming from this mechanism changes sign and becomes negative for peripheral collisions, albeit it is quite small for nuclear collisions at the RHIC energy. (author)

  9. The direction of time

    CERN Document Server

    Reichenbach, Hans

    1999-01-01

    Ever a source of philosophical conjecture and debate, the concept of time represents the beating heart of physics. This final work by the distinguished physicist Hans Reichenbach represents the culmination and integration of a lifetime's philosophical contributions and inquiries into the analysis of time. The result is an outstanding overview of such qualitative, or topological, attributes of time as order and direction.Beginning with a discussion of the emotive significance of time, Reichenbach turns to an examination of the time order of mechanics, the time direction of thermodynamics and m

  10. Advance directives or living wills: reflections of general practitioners ...

    African Journals Online (AJOL)

    Background: Living wills have long been associated with end-of-life care. This study explored the promotion of living wills by general practitioners (GPs) and frail care nursing coordinators who were directly involved in the care of the elderly in Howick, KwaZulu-Natal. The study also explored their views regarding the pro ...

  11. Device for direct digitized radiology of small objects

    International Nuclear Information System (INIS)

    Thomas, G.; Favier, C.; Brebant, C.; Mogavero, R.

    1983-06-01

    A radiological device has been developed to obtain direct digitized views with a large integration time. A micro computer system with programs specially developed for the automatic materials defects evaluation is used. Some results concerning the weldings of electro-nuclear fuel pins are presented here [fr

  12. Collection Directions: The Evolution of Library Collections and Collecting

    Science.gov (United States)

    Dempsey, Lorcan; Malpas, Constance; Lavoie, Brian

    2014-01-01

    This article takes a broad view of the evolution of collecting behaviors in a network environment and suggests some future directions based on various simple models. The authors look at the changing dynamics of print collections, at the greater engagement with research and learning behaviors, and at trends in scholarly communication. The goal is…

  13. The influence of direct and indirect speech on mental representations

    NARCIS (Netherlands)

    Eerland, A.; Engelen, Jan; Zwaan, Rolf

    Language can be viewed as a set of cues that modulate the comprehender’s thought processes. It is a very subtle instrument. For example, the literature suggests that people perceive direct speech (e.g., Joanne said: ‘I went out for dinner last night’) as more vivid and perceptually engaging than

  14. Transfer Pricing Principles VAT/GST v. Direct Taxation

    DEFF Research Database (Denmark)

    Jensen, Dennis Ramsdahl

    2009-01-01

    In this paper the optional transfer pricing provisions in the EC VAT Directive [1] are subject to a more detailed analysis, with a view to considering them in the light of the well-known principles for transfer pricing in the area of income tax law, as set out in Art. 9 of the OECD Model Tax Conv...

  15. The Influence of Direct and Indirect Speech on Mental Representations

    NARCIS (Netherlands)

    A. Eerland (Anita); J.A.A. Engelen (Jan A.A.); R.A. Zwaan (Rolf)

    2013-01-01

    textabstractLanguage can be viewed as a set of cues that modulate the comprehender's thought processes. It is a very subtle instrument. For example, the literature suggests that people perceive direct speech (e.g., Joanne said: 'I went out for dinner last night') as more vivid and perceptually

  16. Direct Numerical Simulations of turbulent flow in a driven cavity

    NARCIS (Netherlands)

    Verstappen, R.; Wissink, J.G.; Cazemier, W.; Veldman, A.E.P.

    Direct numerical simulations (DNS) of 2 and 3D turbulent flows in a lid-driven cavity have been performed. DNS are numerical solutions of the unsteady (here: incompressible) Navier-Stokes equations that compute the evolution of all dynamically significant scales of motion. In view of the large

  17. Web Interface Design Principles for Adults' Self-Directed Learning

    Science.gov (United States)

    Firat, Mehmet; Sakar, A. Nurhan; Kabakci Yurdakul, Isil

    2016-01-01

    One of the most important features which e-learning tools and environments must possess within the scope of lifelong learning is self-directed learning, which can be considered as a form of self-learning. The aim of this study was to determine, based on the views and recommendations of experts, interface design principles for the development of…

  18. Convergent acoustic field of view in echolocating bats.

    Science.gov (United States)

    Jakobsen, Lasse; Ratcliffe, John M; Surlykke, Annemarie

    2013-01-03

    Most echolocating bats exhibit a strong correlation between body size and the frequency of maximum energy in their echolocation calls (peak frequency), with smaller species using signals of higher frequency than larger ones. Size-signal allometry or acoustic detection constraints imposed on wavelength by preferred prey size have been used to explain this relationship. Here we propose the hypothesis that smaller bats emit higher frequencies to achieve directional sonar beams, and that variable beam width is critical for bats. Shorter wavelengths relative to the size of the emitter translate into more directional sound beams. Therefore, bats that emit their calls through their mouths should show a relationship between mouth size and wavelength, driving smaller bats to signals of higher frequency. We found that in a flight room mimicking a closed habitat, six aerial hawking vespertilionid species (ranging in size from 4 to 21 g, ref. 5) produced sonar beams of extraordinarily similar shape and volume. Each species had a directivity index of 11 ± 1 dB (a half-amplitude angle of approximately 37°) and an on-axis sound level of 108 ± 4 dB sound pressure level referenced to 20 μPa root mean square at 10 cm. Thus all bats adapted their calls to achieve similar acoustic fields of view. We propose that the necessity for high directionality has been a key constraint on the evolution of echolocation, which explains the relationship between bat size and echolocation call frequency. Our results suggest that echolocation is a dynamic system that allows different species, regardless of their body size, to converge on optimal fields of view in response to habitat and task.

  19. Aerial view of the works at PGC

    CERN Multimedia

    CERN PhotoLab

    1973-01-01

    Aerial view of the works at PGC : in the foreground, the prefabrication of the concrete slabs. In the background, on the left the storage of the spoil, on the right the extraction tower mounted on PGC.

  20. ARC Code TI: BigView

    Data.gov (United States)

    National Aeronautics and Space Administration — BigView allows for interactive panning and zooming of images of arbitrary size on desktop PCs running linux. Additionally, it can work in a multi-screen environment...

  1. The Byzantine View of Western Europe

    Directory of Open Access Journals (Sweden)

    Donald M. Nicol

    2003-03-01

    Full Text Available Ignorance of others and pride in themselves dominated Byzantine thought about the west, but some held more positive views, whether pragmatic in the face of events or romantic upon discovery of western writings.

  2. Oblique angled view for coracoid fractures.

    Science.gov (United States)

    Goldberg, R P; Vicks, B

    1983-01-01

    In cases of shoulder injury when clinical signs suggest a possible coracoid fracture, a 20 degree posterior oblique film with 20 degrees of cephalad angulation has been shown to demonstrate coracoid fractures when other views have been inconclusive.

  3. Oblique angled view for coracoid fractures

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, R.P.; Vicks, B.

    1983-02-01

    In cases of shoulder injury when clinical signs suggest a possible coracoid fracture, a 20 degree posterior oblique film with 20 degrees of cephalad angulation has been shown to demonstrate coracoid fractures when other views have been inconclusive.

  4. Mormon and Jewish views of the afterlife.

    Science.gov (United States)

    Lester, David; Portner, Jodi; Sierra, Duvan

    2004-12-01

    In their responses to a questionnaire, undergraduates, 60 Mormons, viewed the afterlife as less pleasant than did the 37 Jews, while the Jews were more concerned with sin and judgment and more often believed in reincarnation.

  5. Undertaking midwifery studies: commencing students' views.

    Science.gov (United States)

    Carolan, Mary; Kruger, Gina

    2011-10-01

    to explore the motivations and beliefs of commencing midwifery students against a background of high course demand and high student attrition. a qualitative analysis of student reflective essays. Melbourne, Australia. all commencing midwifery students, in 2008, were invited to participate (n = 41). three primary motivations for choosing midwifery were identified, including: notions of altruism (wanting to help), a fascination with pregnancy and birth, and a view of midwifery as a personally satisfying career. Bachelor of Midwifery programmes attract students with idealised views about midwifery practice. Such views may lead to student disillusionment, tensions with educators and clinicians, and higher rates of student attrition. Students need greater support to examine their views about midwifery practice. More meaningful support may assist the students' successful socialisation into clinical practice. Copyright © 2009 Elsevier Ltd. All rights reserved.

  6. CURRICULUM MATTERS: Physics 2000: a personal view

    Science.gov (United States)

    Field, R. J.

    1997-03-01

    The author expresses his personal views of how Physics for A-level should develop towards the year 2000. These cover: the historical treatment of core topics, syllabus structure and the relevance of practical physics.

  7. Advances in direct oxidation methanol fuel cells

    Science.gov (United States)

    Surampudi, S.; Narayanan, S. R.; Vamos, E.; Frank, H.; Halpert, G.; LaConti, A.; Kosek, J.; Prakash, G. K. Surya; Olah, G. A.

    Fuel cells that can operate directly on fuels such as methanol are attractive for low to medium power application in view of their low weight and volume relative to other power sources. A liquid feed direct methanol fuel cell has been developed based on a proton-exchange membrane electrolyte and Pt/Ru and Pt-catalyzed fuel and air/O 2 electrodes, respectively. The cell has been shown to deliver significant power outputs at temperatures of 60 to 90 °C. The cell voltage is near 0.5 V at 300 mA/cm 2 current density and an operating temperature of 90 °C. A deterrent to performance appears to be methanol crossover through the membrane to the oxygen electrode. Further improvements in performance appear possible by minimizing the methanol crossover rate.

  8. Advances in direct oxidation methanol fuel cells

    Science.gov (United States)

    Surampudi, S.; Narayanan, S. R.; Vamos, E.; Frank, H.; Halpert, G.; Laconti, Anthony B.; Kosek, J.; Prakash, G. K. Surya; Olah, G. A.

    1993-01-01

    Fuel cells that can operate directly on fuels such as methanol are attractive for low to medium power applications in view of their low weight and volume relative to other power sources. A liquid feed direct methanol fuel cell has been developed based on a proton exchange membrane electrolyte and Pt/Ru and Pt catalyzed fuel and air/O2 electrodes, respectively. The cell has been shown to deliver significant power outputs at temperatures of 60 to 90 C. The cell voltage is near 0.5 V at 300 mA/cm(exp 2) current density and an operating temperature of 90 C. A deterrent to performance appears to be methanol crossover through the membrane to the oxygen electrode. Further improvements in performance appear possible by minimizing the methanol crossover rate.

  9. A method of multi-view intraoral 3D measurement

    Science.gov (United States)

    Zhao, Huijie; Wang, Zhen; Jiang, Hongzhi; Xu, Yang; Lv, Peijun; Sun, Yunchun

    2015-02-01

    In dental restoration, its important to achieve a high-accuracy digital impression. Most of the existing intraoral measurement systems can only measure the tooth from a single view. Therfore - if we are wilng to acquire the whole data of a tooth, the scans of the tooth from multi-direction ad the data stitching based on the features of the surface are needed, which increases the measurement duration and influence the measurement accuracy. In this paper, we introduce a fringe-projection based on multi-view intraoral measurement system. It can acquire 3D data of the occlusal surface, the buccal surface and the lingual surface of a tooth synchronously, by using a senor with three mirrors, which aim at the three surfaces respectively and thus expand the measuring area. The constant relationship of the three mirrors is calibrated before measurement and can help stitch the data clouds acquired through different mirrors accurately. Therefore the system can obtain the 3D data of a tooth without the need to measure it from different directions for many times. Experiments proved the availability and reliability of this miniaturized measurement system.

  10. Polymer Directed Protein Assemblies

    Directory of Open Access Journals (Sweden)

    Patrick van Rijn

    2013-05-01

    Full Text Available Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e.g., virus particles. Viruses are a multi-protein assembly of which the morphology is dictated by poly-nucleotides namely RNA or DNA. This “biopolymer” directs the proteins and imposes limitations on the structure like the length or diameter of the particle. Not only do these bionanoparticles use polymer-directed self-assembly, also processes like amyloid formation are in a way a result of directed protein assembly by partial unfolded/misfolded biopolymers namely, polypeptides. The combination of proteins and synthetic polymers, inspired by the natural processes, are therefore regarded as a highly promising area of research. Directed protein assembly is versatile with respect to the possible interactions which brings together the protein and polymer, e.g., electrostatic, v.d. Waals forces or covalent conjugation, and possible combinations are numerous due to the large amounts of different polymers and proteins available. The protein-polymer interacting behavior and overall morphology is envisioned to aid in clarifying protein-protein interactions and are thought to entail some interesting new functions and properties which will ultimately lead to novel bio-hybrid materials.

  11. Direct vision internal urethrotomy

    DEFF Research Database (Denmark)

    Jakobsen, H; Willumsen, H; Søndergaard Jensen, L

    1984-01-01

    During a five-year period, direct vision internal urethrotomy was used for the treatment of urethral strictures in 34 men. After the primary operation the patients were followed for an average period of 29 months (range 3-73 months). During this period 53% of the patients were found to have one...

  12. CGH Future Directions

    Science.gov (United States)

    Looking ahead, we have three major future directions that we believe will help us push forward in achieving NCI’s goal of advancing global cancer research, building expertise, and leveraging resources across nations to address the challenges of cancer and reduce cancer deaths worldwide.

  13. Summary and future directions

    Science.gov (United States)

    Janaki R.R. Alavalapati; D. Evan Mercer

    2004-01-01

    This chapter summarizes the main results from the preceding chapters, identifies gaps, and provides direction for fbture economics research on agroforestry systems. Although a common theme throughout the 1990s was that economic research on agroforestry continued to lag the advances made in the bio-physical sciences, the wide range of systems, regions, and techniques...

  14. Directional loudness perception

    DEFF Research Database (Denmark)

    Sivonen, Ville Pekka

    developed. The research and modeling of loudness have mainly been concerned with the temporal and spectral aspects of sounds, while the spatial aspects have mostly been overlooked. This PhD thesis investigates the spatial aspects of loudness perception, namely, how does the direction from which a sound...

  15. Direct Sulfation of Limestone

    DEFF Research Database (Denmark)

    Hu, Guilin; Dam-Johansen, Kim; Wedel, Stig

    2007-01-01

    The direct sulfation of limestone was studied in a laboratory fixed-bed reactor. It is found that the direct sulfation of limestone involves nucleation and crystal grain growth of the solid product (anhydrite). At 823 K and at low-conversions (less than about 0.5 %), the influences of SO2, O-2...... and CO2 on the direct sulfation of limestone corresponds to apparent reaction orders of about 0.2, 0.2 and -0.5, respectively. Water is observed to promote the sulfation reaction and increase the apparent reaction orders of SO2 and O-2. The influence of O-2 at high O-2 concentrations (> about 15...... %) becomes negligible. In the temperature interval from 723 K to 973 K, an apparent activation energy of about 104 kJ/mol is observed for the direct sulfation of limestone. At low temperatures and low conversions, the sulfation process is most likely under mixed control by chemical reaction and solid...

  16. Direct contamination - seasonality

    International Nuclear Information System (INIS)

    Aarkrog, A.

    1994-01-01

    Direct contamination is the primary pathway to terrestrial vegetation in the first period after an activity release to the atmosphere. All radionuclides are able to be transferred via this pathway. Deposition, interception and retention are the three processes involved in direct contamination of crops. Wet deposition is more important than dry deposition in temperature regions. Resuspension and rainsplash both belong to secondary direct deposition and became evident for e.g. radiocaesium after the Chernobyl accident. Seasonality is the varying response to radioactive contamination of crops according to the time of the year when the contamination occurs. Shortlived radionuclides (as 131 I) and those that mainly enter the foodchain by direct contamination (e.g. 137 Cs) are especially important in this connection. In particular, the contamination of cereal crops is influenced by seasonality. As a result of seasonality the impact of the Chernobyl accident on the radioactive contamination of human diet was for the same deposition density higher in southern than in northern Europe. (orig.)

  17. Direct fired heat exchanger

    Science.gov (United States)

    Reimann, Robert C.; Root, Richard A.

    1986-01-01

    A gas-to-liquid heat exchanger system which transfers heat from a gas, generally the combustion gas of a direct-fired generator of an absorption machine, to a liquid, generally an absorbent solution. The heat exchanger system is in a counterflow fluid arrangement which creates a more efficient heat transfer.

  18. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    Experimental research of fluid flow and convection heat transfer in plate channels filled with glass or metallic particles, Experimental Thermal and Fluid. Science, Vol.20, Issue.1, 45-54. [7] Rahimian M.H., Pourshaghaghy A.,. 2002. Direct simulation of forced convection flow in a parallel plate channel filled with porous media, ...

  19. The Directed Case Method.

    Science.gov (United States)

    Cliff, William H.; Curtin, Leslie Nesbitt

    2000-01-01

    Provides an example of a directed case on human anatomy and physiology. Uses brief real life newspaper articles and clinical descriptions of medical reference texts to describe an actual, fictitious, or composite event. Includes interrelated human anatomy and physiology topics in the scenario. (YDS)

  20. Three-Dimensional Views of Titan

    Science.gov (United States)

    Kirk, R. L.; Howington-Kraus, E.; Redding, B. L.; Becker, T. L.; Lee, E. M.; Stiles, B. W.; Hensley, S.; Cassini RADAR Team

    2009-04-01

    By the end of its four-year prime mission, Cassini obtained 300-1500 m resolution synthetic aperture radar images of the surface of Titan during 19 flybys, with ~2% of the surface imaged two or more times. Most image pairs have different viewing directions, and thus contain stereo parallax that encodes information about Titan's surface relief over distances of ~1 km and greater. Our first step toward extracting quantitative topographic information was our development of rigorous "sensor models" that allowed the stereo systems previously used at the USGS and JPL to map Venus with Magellan images to be used for Titan mapping. The second major step toward extensive topomapping of Titan has been the reprocessing of the RADAR images based on an improved model of the satellite's rotation. Whereas the original images (except for a few pairs obtained at similar orbital phase, some of which we have mapped previously) were offset by as much as 30 km, the new versions align much better. The remaining misalignments, typically trajectories before mapping. The stereo coverage includes a large portion of Titan's north polar lake country, a continuous traverse of high resolution data from the lakes to mid-southern latitudes, and widely distributed smaller areas (more than 20 in all). Many of these areas are viewed and illuminated from very different directions, making image matching difficult, but we find that is possible to produce digital topographic models (DTMs) even from opposite-side image pairs by a combination of automatic image matching and interactive editing. We are collecting DTMs of all usable image pairs and will present the most interesting results. The first six areas mapped may be summarized as follows. T25-T28-T29 We have mapped the 200x100 km overlap between the T25 and T28 images, covering parts of Titan's largest north polar sea, Kraken Mare. The most basic discovery is that the darkest areas occupy the topographic lows, consistent with their interpretation as

  1. Instant VMware view virtualization how-to

    CERN Document Server

    Geddam, Ramesh

    2013-01-01

    Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks.This is a Packt Instant How-to guide, which provides concise and clear recipes for getting started with setting up the VDI in different environments.Instant VMware View 5 Virtualization How-to is for architects, solution providers, consultants, engineers, and anyone planning to design and implement a solution based on VMware View 5.

  2. A balanced view of development as freedom

    OpenAIRE

    Tungodden, Bertil

    2001-01-01

    Amartya Sen, in his most recent book Development as Freedom, argues that expansion of human freedom should both be viewed as the primary end and the principle means of development. This paper provides an overview and a critical scrutiny of the Senian perspective from the point of view of an economist. First, I discuss to what extent Sen's normative theory of development justifies a particular focus on inequality and poverty. Second, I look at Sen's perspective on democratic reasoning as the c...

  3. Children's food consumption during television viewing.

    Science.gov (United States)

    Matheson, Donna M; Killen, Joel D; Wang, Yun; Varady, Ann; Robinson, Thomas N

    2004-06-01

    Television viewing is associated with childhood obesity. Eating during viewing and eating highly advertised foods are 2 of the hypothesized mechanisms through which television is thought to affect children's weight. Our objectives were to describe the amounts and types of foods that children consume while watching television, compare those types with the types consumed at other times of the day, and examine the associations between children's body mass index (BMI) and the amounts and types of foods consumed during television viewing. Data were collected from 2 samples. The first sample consisted of ethnically diverse third-grade children, and the second consisted predominantly of Latino fifth-grade children. Three nonconsecutive 24-h dietary recalls were collected from each child. For each eating episode reported, children were asked whether they had been watching television. Height and weight were measured by using standard methods and were used to calculate BMI. On weekdays and weekend days, 17-18% and approximately 26% of total daily energy, respectively, were consumed during television viewing in the 2 samples. Although the fat content of the foods consumed during television viewing did not differ significantly from that of the foods consumed with the television off, less soda, fast food, fruit, and vegetables were consumed with the television on. The amount of food consumed during television viewing was not associated with children's BMI, but in the third-grade sample, the fat content of foods consumed during television viewing was associated with BMI. A significant proportion of children's daily energy intake is consumed during television viewing, and the consumption of high-fat foods on weekends may be associated with BMI in younger children.

  4. VMware Horizon View 6 desktop virtualization cookbook

    CERN Document Server

    Ventresco, Jason

    2014-01-01

    If you want a more detailed explanation concerning the implementation of several different core features of VMware Horizon View, this is the book for you. Whether you are new to VMware Horizon View or an existing user, this book will provide you with the knowledge you need to successfully deploy several core features and get introduced to the latest features of version 6.0 as well.

  5. Collaborative fuzzy clustering from multiple weighted views.

    Science.gov (United States)

    Jiang, Yizhang; Chung, Fu-Lai; Wang, Shitong; Deng, Zhaohong; Wang, Jun; Qian, Pengjiang

    2015-04-01

    Clustering with multiview data is becoming a hot topic in data mining, pattern recognition, and machine learning. In order to realize an effective multiview clustering, two issues must be addressed, namely, how to combine the clustering result from each view and how to identify the importance of each view. In this paper, based on a newly proposed objective function which explicitly incorporates two penalty terms, a basic multiview fuzzy clustering algorithm, called collaborative fuzzy c-means (Co-FCM), is firstly proposed. It is then extended into its weighted view version, called weighted view collaborative fuzzy c-means (WV-Co-FCM), by identifying the importance of each view. The WV-Co-FCM algorithm indeed tackles the above two issues simultaneously. Its relationship with the latest multiview fuzzy clustering algorithm Collaborative Fuzzy K-Means (Co-FKM) is also revealed. Extensive experimental results on various multiview datasets indicate that the proposed WV-Co-FCM algorithm outperforms or is at least comparable to the existing state-of-the-art multitask and multiview clustering algorithms and the importance of different views of the datasets can be effectively identified.

  6. LabVIEW Support at CERN

    CERN Multimedia

    HR Department

    2010-01-01

    Since the beginning of 2009, due to the CERN restructuring, LabVIEW support moved from the IT to the EN department, joining the Industrial Controls and Electronics Group (ICE). LabVIEW support has been merged with the Measurement, Test and Analysis (MTA) section which, using LabVIEW, has developed most of the measurement systems to qualify the LHC magnets and components over the past 10 years. The post mortem analysis for the LHC hardware commissioning has also been fully implemented using LabVIEW, customised into a framework, called RADE, for CERN needs. The MTA section has started with a proactive approach sharing its tools and experience with the CERN LabVIEW community. Its framework (RADE) for CERN integrated application development has been made available to the users. Courses on RADE have been integrated into the standard National Instruments training program at CERN. RADE and LabVIEW support were merged together in 2010 on a single email address:labview.support@cern.ch For more information please...

  7. ViewDEX: a status report

    International Nuclear Information System (INIS)

    Svalkvist, Angelica; Baath, Magnus; Maansson, Lars Gunnar; Svensson, Sune; Haakansson, Markus

    2016-01-01

    ViewDEX (Viewer for Digital Evaluation of X-ray images) is an image viewer and task manager suitable for research and optimisation tasks in medical imaging. The software has undergone continuous development during more than a decade and has during this time period been used in numerous studies. ViewDEX is DICOM compatible, and the features of the interface (tasks, image handling and functionality) are general and flexible. The set-up of a study is determined by altering properties in a text-editable file, enabling easy and flexible configuration. ViewDEX is developed in Java and can run from any disc area connected to a computer. It is free to use for non-commercial purposes and can be downloaded from http://www.vgregion.se/sas/viewdex. The purposes of the present article are to give a short overview of the development of ViewDEX and to describe recent updates of the software. In addition, a description on how to configure a viewing session in ViewDEX is provided. (authors)

  8. Semi-Supervised Multi-View Ensemble Learning Based On Extracting Cross-View Correlation

    Directory of Open Access Journals (Sweden)

    ZALL, R.

    2016-05-01

    Full Text Available Correlated information between different views incorporate useful for learning in multi view data. Canonical correlation analysis (CCA plays important role to extract these information. However, CCA only extracts the correlated information between paired data and cannot preserve correlated information between within-class samples. In this paper, we propose a two-view semi-supervised learning method called semi-supervised random correlation ensemble base on spectral clustering (SS_RCE. SS_RCE uses a multi-view method based on spectral clustering which takes advantage of discriminative information in multiple views to estimate labeling information of unlabeled samples. In order to enhance discriminative power of CCA features, we incorporate the labeling information of both unlabeled and labeled samples into CCA. Then, we use random correlation between within-class samples from cross view to extract diverse correlated features for training component classifiers. Furthermore, we extend a general model namely SSMV_RCE to construct ensemble method to tackle semi-supervised learning in the presence of multiple views. Finally, we compare the proposed methods with existing multi-view feature extraction methods using multi-view semi-supervised ensembles. Experimental results on various multi-view data sets are presented to demonstrate the effectiveness of the proposed methods.

  9. Panoramic UAV Views for Landscape Heritage Analysis Integrated with Historical Maps Atlases

    Directory of Open Access Journals (Sweden)

    Raffaella Brumana

    2012-12-01

    Full Text Available Analysis of landscape heritage and territorial transformations dedicated to its protection and preservation rely increasingly upon the contribution of integrated disciplines. In 2000 the European Landscape Convention established the necessity ‘to integrate landscape into its regional and town planning policies and in its cultural, environmental, agricultural, social and economic policies’. Such articulated territorial dimension requires an approach able to consider multi-dimensional data and information from different spatial and temporal series, supporting territorial analysis and spatial planning under different points of view. Most of landscape representation instruments are based on 3D models based on top-down image/views, with still weak possibilities to reproduce views similar to the human eye or map surface development along preferential directions (e.g. water front views. A methodological approach of rediscovering the long tradition of historical water front view maps, itinerary maps and human eye maps perspective, could improve content decoding of cultural heritage with environmental dimension and its knowledge transfer to planners and citizens. The research here described experiments multiple view models which can simulate real scenarios at the height of observer or along view front. The paper investigates the possibilities of panoramic views simulation and reconstruction from images acquired by RC/UAV platforms and multisensory systems, testing orthoimage generation for landscape riparian areas and water front wiew representation, verifying the application of automatic algorithms for image orientation and DTM extraction (AtiPE, ATE on such complex image models, identifying critical aspects for future development. The sample landscape portion along ancient water corridor, with stratified values of anthropogenic environment, shows the potentials of future achievement in supporting sustainable planning through technical water front

  10. Video System for Viewing From a Remote or Windowless Cockpit

    Science.gov (United States)

    Banerjee, Amamath

    2009-01-01

    A system of electronic hardware and software synthesizes, in nearly real time, an image of a portion of a scene surveyed by as many as eight video cameras aimed, in different directions, at portions of the scene. This is a prototype of systems that would enable a pilot to view the scene outside a remote or windowless cockpit. The outputs of the cameras are digitized. Direct memory addressing is used to store the data of a few captured images in sequence, and the sequence is repeated in cycles. Cylindrical warping is used in merging adjacent images at their borders to construct a mosaic image of the scene. The mosaic-image data are written to a memory block from which they can be rendered on a head-mounted display (HMD) device. A subsystem in the HMD device tracks the direction of gaze of the wearer, providing data that are used to select, for display, the portion of the mosaic image corresponding to the direction of gaze. The basic functionality of the system has been demonstrated by mounting the cameras on the roof of a van and steering the van by use of the images presented on the HMD device.

  11. The impact of demographic and psychological characteristics and cost behaviors on views towards the luxury restaurant

    Directory of Open Access Journals (Sweden)

    Nazanin Haji Mirza Hossein Yazdi

    2017-05-01

    Full Text Available This study examines the impact of psychological characteristics, materialism, unity, uniqueness, hedonism, and perfectionism, and demographic characteristics including gender, age and income as well as the costing behavior (price on the views towards the luxury restaurant. The results show that perfectionism and uniqueness had a direct impact on the consumer's views towards luxury restaurant. On the other hand, the demographic characteristics such as age, income and education had a positive relationship with the consumer's views towards the luxury restaurant. Finally, a new hypothesis as the relationship between price and service quality and customer atti-tudes was examined in this study and it was concluded that there was a significant positive rela-tionship between price and customer’s views. The results of the research data also confirmed the relationship between price and service quality.

  12. A Grassmannian Approach to Address View Change Problem in Gait Recognition.

    Science.gov (United States)

    Connie, Tee; Goh, Michael Kah Ong; Teoh, Andrew Beng Jin

    2017-06-01

    Gait recognition appears to be a valuable asset when conventional biometrics cannot be employed. Nonetheless, recognizing human by gait is not a trivial task due to the complex human kinematic structure and other external factors affecting human locomotion. A major challenge in gait recognition is view variation. A large difference between the views in the query and reference sets often leads to performance deterioration. In this paper, we show how to generate virtual views to compensate the view difference in the query and reference sets, making it possible to match the query and reference sets using standardized views. The proposed method, which combines multiview matrix representation and a novel randomized kernel extreme learning machine, is an end-to-end solution for view change problem under Grassmann manifold treatment. Under the right condition, the view-tagging problem can be eliminated. Since the recording angle and walking direction of the subject are not always available, this is particularly valuable for a practical gait recognition system. We present several working scenarios for multiview recognition that have not be considered before. Rigorous experiments have been conducted on two challenging benchmark databases containing multiview gait datasets. Experiments show that the proposed approach outperforms several state-of-the-arts methods.

  13. 3D multi-view convolutional neural networks for lung nodule classification.

    Science.gov (United States)

    Kang, Guixia; Liu, Kui; Hou, Beibei; Zhang, Ningbo

    2017-01-01

    The 3D convolutional neural network (CNN) is able to make full use of the spatial 3D context information of lung nodules, and the multi-view strategy has been shown to be useful for improving the performance of 2D CNN in classifying lung nodules. In this paper, we explore the classification of lung nodules using the 3D multi-view convolutional neural networks (MV-CNN) with both chain architecture and directed acyclic graph architecture, including 3D Inception and 3D Inception-ResNet. All networks employ the multi-view-one-network strategy. We conduct a binary classification (benign and malignant) and a ternary classification (benign, primary malignant and metastatic malignant) on Computed Tomography (CT) images from Lung Image Database Consortium and Image Database Resource Initiative database (LIDC-IDRI). All results are obtained via 10-fold cross validation. As regards the MV-CNN with chain architecture, results show that the performance of 3D MV-CNN surpasses that of 2D MV-CNN by a significant margin. Finally, a 3D Inception network achieved an error rate of 4.59% for the binary classification and 7.70% for the ternary classification, both of which represent superior results for the corresponding task. We compare the multi-view-one-network strategy with the one-view-one-network strategy. The results reveal that the multi-view-one-network strategy can achieve a lower error rate than the one-view-one-network strategy.

  14. Incretin secretion: direct mechanisms

    DEFF Research Database (Denmark)

    Balk-Møller, Emilie; Holst, Jens Juul; Kuhre, Rune Ehrenreich

    2014-01-01

    enzyme responsible for incretin degradation (dipeptidyl peptidase-4) is inhibited (drugs are already on the market) while the secretion of endogenous GLP-1 secretion is stimulated at the same time may prove particularly rewarding. In this section we review current knowledge on the mechanisms for direct......The incretin hormones glucose-dependent insulinotropic polypeptide (GIP) and glucagon-like peptide 1 (GLP-1) are secreted from gastro-intestinal K- and L-cells, respectively, and play an important role in post-prandial blood glucose regulation. They do this by direct stimulation of the pancreatic β....... This suggests that the therapeutic potential of GIP for the treatment for T2D is limited, whereas GLP-1 based treatments have been on the market since 2005. Research is now pursuing novel approaches to utilize the effects of GLP-1 for T2D treatment. A combinatorial approach by which the activity of the major...

  15. Direct thermal neutron capture

    International Nuclear Information System (INIS)

    Raman, S.; Kahane, S.; Lynn, J.E.

    1987-01-01

    We discuss the direct-capture theory pertaining to primary electric dipole (E1) transitions following slow-neutron capture. For light nuclides that we have studied (including 9 Be, 12 C, 13 C, 24 Mg, 25 Mg, 26 Mg, 32 S, 33 S, 34 S, 40 Ca, and 44 Ca), estimates of direct-capture cross sections using optical-model potentials with physically realistic parameters, are in reasonable agreement with the data. Minor disagreements that exist are consistent with extrapolations to light nuclides of generally accepted formulations of compound-nucleus capture. We also discuss the channel-capture approximation which is, in general, a good representation of these cross sections in heavier nuclei particularly if the scattering lengths are not different from the corresponding potential radii. We also draw attention to cases where the use of this formula leads to inaccurate predictions. 9 refs., 1 fig., 2 tab

  16. Incretin secretion: direct mechanisms

    DEFF Research Database (Denmark)

    Balk-Møller, Emilie; Holst, Jens Juul; Kuhre, Rune Ehrenreich

    2014-01-01

    The incretin hormones glucose-dependent insulinotropic polypeptide (GIP) and glucagon-like peptide 1 (GLP-1) are secreted from gastro-intestinal K- and L-cells, respectively, and play an important role in post-prandial blood glucose regulation. They do this by direct stimulation of the pancreatic β......-cell, accounting for some 25-70% of postprandial insulin secretion in healthy subjects. In patients with type 2 diabetes (T2D, however, this effect is greatly reduced or lost due to a combination of severely impaired or eliminated insulinotrophic effect of GIP and reduced meal stimulated GLP-1 secretion...... enzyme responsible for incretin degradation (dipeptidyl peptidase-4) is inhibited (drugs are already on the market) while the secretion of endogenous GLP-1 secretion is stimulated at the same time may prove particularly rewarding. In this section we review current knowledge on the mechanisms for direct...

  17. Direction sensitive neutron detector

    Science.gov (United States)

    Ahlen, Steven; Fisher, Peter; Dujmic, Denis; Wellenstein, Hermann F.; Inglis, Andrew

    2017-01-31

    A neutron detector includes a pressure vessel, an electrically conductive field cage assembly within the pressure vessel and an imaging subsystem. A pressurized gas mixture of CF.sub.4, .sup.3He and .sup.4He at respective partial pressures is used. The field cage establishes a relatively large drift region of low field strength, in which ionization electrons generated by neutron-He interactions are directed toward a substantially smaller amplification region of substantially higher field strength in which the ionization electrons undergo avalanche multiplication resulting in scintillation of the CF.sub.4 along scintillation tracks. The imaging system generates two-dimensional images of the scintillation patterns and employs track-finding to identify tracks and deduce the rate and direction of incident neutrons. One or more photo-multiplier tubes record the time-profile of the scintillation tracks permitting the determination of the third coordinate.

  18. Direct use in Hawaii

    International Nuclear Information System (INIS)

    Beck, A.G.

    1990-01-01

    This paper reports on a public laboratory, Noi'i O Puna, that was established in Hawaii to support direct use research in 1985, tapping the previously unutilized heat in brines from the HGP-A well. Two rounds of small grants were offered to entrepreneurs. With the closure of the HGP-A power plant in late 1989, Noi'i O Puna is expanding its facilities. When the HGP-A well is back in service, Noi'i O Puna will be able to support additional research and development projects, as well as pre-commercial ventures. Direct use industries, which support existing agricultural activities in the region have good potential

  19. Gratitude buffers the adverse effect of viewing the thin ideal on body dissatisfaction.

    Science.gov (United States)

    Homan, Kristin J; Sedlak, Brittany L; Boyd, Elizabeth A

    2014-06-01

    Gratitude has robust associations with multiple aspects of well-being. However, little research has explored whether the psychological benefits of gratitude extend to body image. We used a repeated measures experimental design to test whether a brief period of grateful reflection would buffer the adverse effect of exposure to thin-ideal media. Female undergraduates (N=67) completed three sessions one week apart. The conditions were specifically designed to isolate (a) the effects of viewing thin models on body dissatisfaction and (b) the moderating effect of grateful contemplation. Results showed that body dissatisfaction scores were lower for women who engaged in a brief period of grateful contemplation before viewing photographs of thin models than for women who reflected upon life hassles before viewing the same photographs. The magnitude of this decrease depended on BMI. Gratitude offers an innovative direction for future research directed toward helping women to accept their bodies. Copyright © 2014. Published by Elsevier Ltd.

  20. Future directions for QCD

    International Nuclear Information System (INIS)

    Bjorken, J.D.

    1996-10-01

    New directions for exploring QCD at future high-energy colliders are sketched. These include jets within jets. BFKL dynamics, soft and hard diffraction, searches for disoriented chiral condensate, and doing a better job on minimum bias physics. The new experimental opportunities include electron-ion collisions at HERA, a new collider detector at the C0 region of the TeVatron, and the FELIX initiative at the LHC