WorldWideScience

Sample records for inactive ingredients excipients

  1. Inactive ingredient Search for Approved Drug Products

    Data.gov (United States)

    U.S. Department of Health & Human Services — According to 21 CFR 210.3(b)(8), an inactive ingredient is any component of a drug product other than the active ingredient. Only inactive ingredients in the final...

  2. Interactions and incompatibilities of pharmaceutical excipients with active pharmaceutical ingredients: a comprehensive review

    Directory of Open Access Journals (Sweden)

    Sonali S. Bharate

    2010-09-01

    Full Text Available Studies of active drug/excipient compatibility represent an important phase in the preformulation stage of the development of all dosage forms. The potential physical and chemical interactions between drugs and excipients can affect the chemical nature, the stability and bioavailability of drugs and, consequently, their therapeutic efficacy and safety. The present review covers the literature reports of interaction and incompatibilities of commonly used pharmaceutical excipients with different active pharmaceutical ingredients in solid dosage forms. Examples of active drug/excipient interactions, such as transacylation, the Maillard browning reaction, acid base reactions and physical changes are discussed for different active pharmaceutical ingredients belonging to different therapeutic categories viz antiviral, anti-inflammatory, antidiabetic, antihypertensive, anti-convulsant, antibiotic, bronchodialator, antimalarial, antiemetic, antiamoebic, antipsychotic, antidepressant, anticancer, anticoagulant and sedative/hypnotic drugs and vitamins. Once the solid-state reactions of a pharmaceutical system are understood, the necessary steps can be taken to avoid reactivity and improve the stability of drug substances and products.

  3. Application of instrumented nanoindentation in preformulation studies of pharmaceutical active ingredients and excipients.

    Science.gov (United States)

    Egart, Mateja; Janković, Biljana; Srčič, Stane

    2016-09-01

    Nanoindentation allows quantitative determination of a material's response to stress such as elastic and plastic deformation or fracture tendency. Key instruments that have enabled great advances in nanomechanical studies are the instrumented nanoindenter and atomic force microscopy. The versatility of these instruments lies in their capability to measure local mechanical response, in very small volumes and depths, while monitoring time, displacement and force with high accuracy and precision. This review highlights the application of nanoindentation for mechanical characterization of pharmaceutical materials in the preformulation phase (primary investigation of crystalline active ingredients and excipients). With nanoindentation, mechanical response can be assessed with respect to crystal structure. The technique is valuable for mechanical screening of a material at an early development phase in order to predict and better control the processes in which a material is exposed to stress such as milling and compression.

  4. Interactions between active pharmaceutical ingredients and excipients affecting bioavailability: impact on bioequivalence.

    Science.gov (United States)

    García-Arieta, Alfredo

    2014-12-18

    The aim of the present paper is to illustrate the impact that excipients may have on the bioavailability of drugs and to review existing US-FDA, WHO and EMA regulatory guidelines on this topic. The first examples illustrate that small amounts of sorbitol (7, 50 or 60mg) affect the bioavailability of risperidone, a class I drug, oral solution, in contrast to what is stated in the US-FDA guidance. Another example suggests, in contrast to what is stated in the US-FDA BCS biowaivers guideline, that a small amount of sodium lauryl sulphate (SLS) (3.64mg) affects the bioavailability of risperidone tablets, although the reference product also includes SLS in an amount within the normal range for that type of dosage form. These factors are considered sufficient to ensure that excipients do not affect bioavailability according to the WHO guideline. The alternative criterion, defined in the WHO guideline and used in the FIP BCS biowaivers monographs, that asserts that excipients present in generic products of the ICH countries do not affect bioavailability if used in normal amounts, is shown to be incorrect with an example of alendronate (a class III drug) tablets, where 4mg of SLS increases bioavailability more than 5-fold, although a generic product in the USA contains SLS. Finally, another example illustrates that a 2mg difference in SLS may affect bioavailability of a generic product of a class II drug, even if SLS is contained in the comparator product, and in all cases its amount was within the normal range. Therefore, waivers of in vivo bioequivalence studies (e.g., BCS biowaivers, waivers of certain dosage forms in solution at the time of administration and variations in the excipient composition) should be assessed more cautiously. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Gamma sterilization of pharmaceuticals--a review of the irradiation of excipients, active pharmaceutical ingredients, and final drug product formulations.

    Science.gov (United States)

    Hasanain, Fatima; Guenther, Katharina; Mullett, Wayne M; Craven, Emily

    2014-01-01

    Sterilization by gamma irradiation has shown a strong applicability for a wide range of pharmaceutical products. Due to the requirement for terminal sterilization where possible in the pharmaceutical industry, gamma sterilization has proven itself to be an effective method as indicated by its acceptance in the European Pharmacopeia and the United States Pharmacopeia ( ). Some of the advantages of gamma over competitive procedures include high penetration power, isothermal character (small temperature rise), and no residues. It also provides a better assurance of product sterility than aseptic processing, as well as lower validation demands. Gamma irradiation is capable of killing microorganisms by breaking their chemical bonds, producing free radicals that attack the nucleic acid of the microorganism. Sterility by gamma irradiation is achieved mainly by the alteration of nucleic acid and preventing the cellular division. This review focuses on the extensive application of gamma sterilization to a wide range of pharmaceutical components including active pharmaceutical ingredients, excipients, final drug products, and combination drug-medical devices. A summary of the published literature for each class of pharmaceutical compound or product is presented. The irradiation conditions and various quality control characterization methodologies that were used to determine final product quality are included, in addition to a summary of the investigational outcomes. Based on this extensive literature review and in combination with regulatory guidelines and other published best practices, a decision tree for implementation of gamma irradiation for pharmaceutical products is established. This flow chart further facilitates the implementation of gamma irradiation in the pharmaceutical development process. The summary therefore provides a useful reference to the application and versatility of gamma irradiation for pharmaceutical sterilization. Many pharmaceutical products

  6. Microbicide excipients can greatly increase susceptibility to genital herpes transmission in the mouse

    Directory of Open Access Journals (Sweden)

    Sun Mianmian

    2010-11-01

    Full Text Available Abstract Background Several active ingredients proposed as vaginal microbicides have been shown paradoxically to increase susceptibility to infection in mouse genital herpes (HSV-2 vaginal susceptibility models and in clinical trials. In addition, "inactive ingredients" (or excipients used in topical products to formulate and deliver the active ingredient might also cause epithelial toxicities that increase viral susceptibility. However, excipients have not previously been tested in susceptibility models. Methods Excipients commonly used in topical products were formulated in a non-toxic vehicle (the "HEC universal placebo", or other formulations as specified. Twelve hours after exposure to the excipient or a control treatment, mice were challenged with a vaginal dose of HSV-2, and three days later were assessed for infection by vaginal lavage culture to assess susceptibility. Results The following excipients markedly increased susceptibility to HSV-2 after a single exposure: 5% glycerol monolaurate (GML formulated in K-Y® Warming Jelly, 5% GML as a colloidal suspension in phosphate buffered saline, K-Y Warming Jelly alone, and both of its humectant/solvent ingredients (neat propylene glycol and neat PEG-8. For excipients formulated in the HEC vehicle, 30% glycerin significantly increased susceptibility, and a trend toward increased HSV-2 susceptibility was observed after 10% glycerin, and 0.1% disodium EDTA, but not after 0.0186% disodium EDTA. The following excipients did not increase susceptibility: 10% propylene glycol, 0.18%, methylparaben plus 0.02% propylparaben, and 1% benzyl alcohol. Conclusions As reported with other surfactants, the surfactant/emulsifier GML markedly increased susceptibility to HSV-2. Glycerin at 30% significantly increased susceptibility, and, undiluted propylene glycol and PEG-8 greatly increased susceptibility.

  7. Regulatory Notes on Impact of Excipients on Drug Products and the Maillard Reaction.

    Science.gov (United States)

    Chowdhury, Dipak K; Sarker, Haripada; Schwartz, Paul

    2018-02-01

    In general, it is an important criterion that excipients remain inert throughout the shelf life of the formulated pharmaceutical product. However, depending on the functionality in chemical structure of active drug and excipients, they may undergo interaction. The well-known Maillard reaction occurs between a primary amine with lactose at high temperature to produce brown pigments. The reactivity of Maillard reaction may vary depending on the concentration as well as other conditions. Commercially, there are products where the active pharmaceutical ingredient is a primary amine and contains less than 75% lactose along with inactive excipients. This product does not show Maillard reaction during its shelf life of around 2 years at ambient conditions. However, when the same type of product contains more than 95 % lactose as an excipient, then there is a possibility of interactions though it is not visible in the initial year. Therefore, this regulatory note discusses involvement of different factors of a known drug-excipient interactions with case studies and provides an overview on how the concentration of lactose in the pharmaceutical product is important in addition to temperature and moisture in Maillard reaction.

  8. Modelling and understanding powder flow properties and compactability of selected active pharmaceutical ingredients, excipients and physical mixtures from critical material properties.

    Science.gov (United States)

    Worku, Zelalem Ayenew; Kumar, Dinesh; Gomes, João Victor; He, Yunliang; Glennon, Brian; Ramisetty, Kiran A; Rasmuson, Åke C; O'Connell, Peter; Gallagher, Kieran H; Woods, Trevor; Shastri, Nalini R; Healy, Anne-Marie

    2017-10-05

    The development of solid dosage forms and manufacturing processes are governed by complex physical properties of the powder and the type of pharmaceutical unit operation the manufacturing processes employs. Suitable powder flow properties and compactability are crucial bulk level properties for tablet manufacturing by direct compression. It is also generally agreed that small scale powder flow measurements can be useful to predict large scale production failure. In this study, predictive multilinear regression models were effectively developed from critical material properties to estimate static powder flow parameters from particle size distribution data for a single component and for binary systems. A multilinear regression model, which was successfully developed for ibuprofen, also efficiently predicted the powder flow properties for a range of batches of two other active pharmaceutical ingredients processed by the same manufacturing route. The particle size distribution also affected the compactability of ibuprofen, and the scope of this work will be extended to the development of predictive multivariate models for compactability, in a similar manner to the approach successfully applied to flow properties. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Developmental toxicity assessment of common excipients using a stem cell-based in vitro morphogenesis model.

    Science.gov (United States)

    Yuan, Chloe J; Marikawa, Yusuke

    2017-11-01

    Various chemical compounds can inflict developmental toxicity when sufficiently high concentrations are exposed to embryos at the critical stages of development. Excipients, such as coloring agents and preservatives, are pharmacologically inactive ingredients that are included in various medications, foods, and cosmetics. However, concentrations that may adversely affect embryo development are largely unknown for most excipients. Here, the lowest observed adverse effect level (LOAEL) to inflict developmental toxicity was assessed for three coloring agents (allura red, brilliant blue, and tartrazine) and three preservatives (butylated hydroxyanisole, metabisulfite, and methylparaben). Adverse impact of a compound exposure was determined using the stem cell-based in vitro morphogenesis model, in which three-dimensional cell aggregates, or embryoid bodies (EBs), recapitulate embryonic processes of body axis elongation and patterning. LOAEL to impair EB morphogenesis was 200 μM for methylparaben, 400 μM for butylated hydroxyanisole, 600 μM for allura red and brilliant blue, and 1000 μM for metabisulfite. Gene expression analyses of excipient-treated EBs revealed that butylated hydroxyanisole and methylparaben significantly altered profiles of developmental regulators involved in axial elongation and patterning of the body. The present study may provide a novel in vitro approach to investigate potential developmental toxicity of common excipients with mechanistic insights. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Importance and globalization status of good manufacturing practice (GMP) requirements for pharmaceutical excipients.

    Science.gov (United States)

    Abdellah, Abubaker; Noordin, Mohamed Ibrahim; Wan Ismail, Wan Azman

    2015-01-01

    Pharmaceutical excipients are no longer inert materials but it is effective and able to improve the characteristics of the products' quality, stability, functionality, safety, solubility and acceptance of patients. It can interact with the active ingredients and alter the medicament characteristics. The globalization of medicines' supply enhances the importance of globalized good manufacturing practice (GMP) requirements for pharmaceutical excipients. This review was intended to assess the globalization status of good manufacturing practice (GMP) requirements for pharmaceutical excipients. The review outcomes demonstrate that there is a lack of accurately defined methods to evaluate and measure excipients' safety. Furthermore good manufacturing practice requirements for excipients are not effectively globalized.

  11. Medicines, excipients and dietary intolerances.

    Science.gov (United States)

    2016-08-01

    Medicinal products contain not only active drugs but also other ingredients included for a variety of purposes and collectively known as excipients.(1) People who wish to avoid a specific substance because of an allergy or intolerance may ask a healthcare professional about the constituents of a medicine and whether an alternative is available. In a previous article we discussed the issues facing people who wish to avoid certain substances for religious or cultural reasons.(2) Here, we provide an overview of several dietary conditions and the pharmaceutical issues that need to be considered by healthcare professionals advising on the suitability of a medicine. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  12. Potentially harmful excipients in neonatal medicines

    DEFF Research Database (Denmark)

    Nellis, Georgi; Metsvaht, Tuuli; Varendi, Heili

    2015-01-01

    OBJECTIVES: We aimed to describe administration of eight potentially harmful excipients of interest (EOI)-parabens, polysorbate 80, propylene glycol, benzoates, saccharin sodium, sorbitol, ethanol and benzalkonium chloride-to hospitalised neonates in Europe and to identify risk factors for exposure....... METHODS: All medicines administered to neonates during 1 day with individual prescription and demographic data were registered in a web-based point prevalence study. Excipients were identified from the Summaries of Product Characteristics. Determinants of EOI administration (geographical region......, gestational age (GA), active pharmaceutical ingredient, unit level and hospital teaching status) were identified using multivariable logistical regression analysis. RESULTS: Overall 89 neonatal units from 21 countries participated. Altogether 2095 prescriptions for 530 products administered to 726 neonates...

  13. Myrrh a traditional medicine or a multipurpose pharmaceutical excipient

    Directory of Open Access Journals (Sweden)

    Fatemeh Erfanfar

    2015-12-01

    Full Text Available A drug dosage form contains excipients as well as active pharmaceutical ingredients. Formerly, excipients were considered inert components that were used by a formulator to provide the suitable volume, weight and consistency of a dosage form. Today, however, excipients are expected to perform multifunctional roles such as enhancing physical, chemical and microbial stabilities of the dosage form, improving the color or odor of the formulation, and influencing the release and bioavailability of the active ingredient. Among various excipients, natural ones seem to be more beneficial to use, since they are economical, safe, biodegradable, and biocompatible. In this article, myrrh oleo-gum-resin is introduced as a potential natural multipurpose excipient that can perform many useful roles in pharmaceutical dosage forms. Scopus and Google scholar electronic databases were searched to find different properties of myrrh as an excipient. Moreover, ten famous traditional Iranian medicine books were studied to find semisolid formulations named Sabgh, which contained myrrh. One of these formulations was prepared, and its physical and microbiological stabilities were assessed. The role of myrrh as an excipient in this formulation is discussed here. Antibacterial and preservative effects shown in the formulation were related to the essential oil of myrrh. The gum portion was found to be a potential surfactant. In addition, myrrh is a natural muco-adhesive and film forming material. These properties were observed for myrrh in the Sabgh formulation in this study as well. So we can conclude that myrrh could be a potential multipurpose excipient in pharmaceutical industries, which needs further research.

  14. Studies of beneficial interactions between active medicaments and excipients in pharmaceutical formulations.

    Science.gov (United States)

    Kalinkova, G N

    1999-09-30

    A review of "up to date" research findings leading to new concepts of the pharmaceutical formulations and their interactions has been presented. The rational approaches to the excipients choice as well as to their interactions with medicaments have been shown as a basis for modern modelling of pharmaceutical formulations. The importance of complexation, hydrogen bonding, ion-dipole, dipole-dipole and van der Waals attractions as the tools which can modify the physicochemical, pharmacological or pharmacokinetical behaviour of the medicaments has been emphasised. In vivo studies (carried out in healthy human subjects-volunteers, in beagle dogs, in rats etc.) and in vitro studies (on excised human skin, hairless mouse skin etc.) as well as studies of chemical stability and bioavailability serve also as a proof of these interactions. Therefore, excipients are important components of pharmaceutical formulations and they can take an active part in the improvement of the characteristics of formulations (but they may also reduce the effectiveness of some preparations). In this context, the so called active and inactive ingredients in pharmaceutical formulations are inexact, old and "out-of date". Their further use is only conventional. In conclusion, among the various modern techniques applied the combination of infrared spectroscopy and X-ray diffraction has been estimated as the most successful in proving the interactions between drugs and excipients. Finally, pharmaceutical formulations and their interactions have constituted a diverse and rapidly expanding field of Pharmacy (Pharmaceutical Technology, Pharmaceutical Industry and Pharmaceutical Sciences) which covers a wide range of numerical topics within an unified framework.

  15. Expanding innovation in the field of pharmaceutical excipients

    Directory of Open Access Journals (Sweden)

    Shireesh Apte

    2012-09-01

    Full Text Available The current generation of combined or derivatized excipients (from food products primarily increase manufacturing efficiencies, improve API ADME profiles and provide sustained delivery. While these attributes certainly are by no means trivial for the pharmaceutical industry, they are not necessarily conducive to enable in vivo delivery or increase in vivo efficacy of next generation APIs’. While the ability of food ingredient mixtures or derivatives to modulate more of such ‘delivery attributes' should not be underestimated, a reevaluation of this paradigm is necessary such that 'innovation by design' supersedes 'innovation by serendipity', especially with regard to making pharmaceutical excipients fit for in vivo purpose.

  16. High-Throughput Excipient Discovery Enables Oral Delivery of Poorly Soluble Pharmaceuticals

    OpenAIRE

    Ting, Jeffrey M.; Tale, Swapnil; Purchel, Anatolii A.; Jones, Seamus D.; Widanapathirana, Lakmini; Tolstyka, Zachary P.; Guo, Li; Guillaudeu, Steven J.; Bates, Frank S.; Reineke, Theresa M.

    2016-01-01

    Polymeric excipients are crucial ingredients in modern pills, increasing the therapeutic bioavailability, safety, stability, and accessibility of lifesaving products to combat diseases in developed and developing countries worldwide. Because many early-pipeline drugs are clinically intractable due to hydrophobicity and crystallinity, new solubilizing excipients can reposition successful and even failed compounds to more effective and inexpensive oral formulations. With assistance from high-th...

  17. [The excipient properties of shea butter compared with vaseline and lanolin].

    Science.gov (United States)

    Thioune, Oumar; Khouma, Barham; Diarra, Mounibé; Diop, Alioune B; Lô, Issa

    2003-01-01

    A shea butter ointment containing 3% aureomycin (clortetracyclin hydrocloride) was prepared and some of its macroscopic and microscopic characteristics were evaluated. Then, the release of the active ingredient was compared by UV spectrophotometry with those obtained when excipients such as petroleum jelly and lanoline were used. Results had shown that the shea butter ointment had satisfactory characteristics. In the other hand, it was found that shea butter released the aureomycin easily and at a faster rate than the other excipients.

  18. Particle Engineering of Excipients for Direct Compression: Understanding the Role of Material Properties.

    Science.gov (United States)

    Mangal, Sharad; Meiser, Felix; Morton, David; Larson, Ian

    2015-01-01

    Tablets represent the preferred and most commonly dispensed pharmaceutical dosage form for administering active pharmaceutical ingredients (APIs). Minimizing the cost of goods and improving manufacturing output efficiency has motivated companies to use direct compression as a preferred method of tablet manufacturing. Excipients dictate the success of direct compression, notably by optimizing powder formulation compactability and flow, thus there has been a surge in creating excipients specifically designed to meet these needs for direct compression. Greater scientific understanding of tablet manufacturing coupled with effective application of the principles of material science and particle engineering has resulted in a number of improved direct compression excipients. Despite this, significant practical disadvantages of direct compression remain relative to granulation, and this is partly due to the limitations of direct compression excipients. For instance, in formulating high-dose APIs, a much higher level of excipient is required relative to wet or dry granulation and so tablets are much bigger. Creating excipients to enable direct compression of high-dose APIs requires the knowledge of the relationship between fundamental material properties and excipient functionalities. In this paper, we review the current understanding of the relationship between fundamental material properties and excipient functionality for direct compression.

  19. Assessing the efficiency of polymeric excipients by atomistic molecular dynamics simulations.

    Science.gov (United States)

    Jha, Prateek K; Larson, Ronald G

    2014-05-05

    We have performed all-atom molecular dynamics simulations of aqueous solutions of model oligomers of hydroxypropyl methylcellulose (HPMC) and hydroxypropyl methylcellulose acetate succinate (HPMCAS) excipients interacting with a representative poorly soluble active pharmaceutical ingredient (API), phenytoin. Simulations reveal formation of excipient-API complexes for some of the oligomers, which results in a reduction of API aggregation. API aggregation and diffusivity decreased with an increase in excipient content. Excipients form a "gel-like" phase spanning the simulation box beyond ∼10 wt %; API diffusivity within this gel phase is much smaller than API diffusivity without excipient, and decreases exponentially, by 5 orders of magnitude, with increased polymer concentration. Substantial differences are observed with variations in methyl, hydroxypropyl, acetate, and succinate substitution levels in the model oligomers and with the deprotonation state of succinate groups, with strongest interactions with hydrophobic phenytoin observed in the case of acetate substitution. These are used to develop quantitative measures of excipient-API interactions and excipient efficiency in the inhibition of API aggregation. We also find that for model oligomers based on Methocel E (manufactured by Dow Pharma & Food Solutions) chemistry, oligomers of length 10 monomers and simulation boxes of size 7 nm give results similar to those for longer oligomers and bigger boxes. The quantitative measures developed in this study are expected to prove useful as computational screening tools in excipient design.

  20. An accurate and precise representation of drug ingredients.

    Science.gov (United States)

    Hanna, Josh; Bian, Jiang; Hogan, William R

    2016-01-01

    In previous work, we built the Drug Ontology (DrOn) to support comparative effectiveness research use cases. Here, we have updated our representation of ingredients to include both active ingredients (and their strengths) and excipients. Our update had three primary lines of work: 1) analysing and extracting excipients, 2) analysing and extracting strength information for active ingredients, and 3) representing the binding of active ingredients to cytochrome P450 isoenzymes as substrates and inhibitors of those enzymes. To properly differentiate between excipients and active ingredients, we conducted an ontological analysis of the roles that various ingredients, including excipients, have in drug products. We used the value specification model of the Ontology for Biomedical Investigations to represent strengths of active ingredients and then analyzed RxNorm to extract excipient and strength information and modeled them according to the results of our analysis. We also analyzed and defined dispositions of molecules used in aggregate as active ingredients to bind cytochrome P450 isoenzymes. Our analysis of excipients led to 17 new classes representing the various roles that excipients can bear. We then extracted excipients from RxNorm and added them to DrOn for branded drugs. We found excipients for 5,743 branded drugs, covering ~27% of the 21,191 branded drugs in DrOn. Our analysis of active ingredients resulted in another new class, active ingredient role. We also extracted strengths for all types of tablets, capsules, and caplets, resulting in strengths for 5,782 drug forms, covering ~41% of the 14,035 total drug forms and accounting for ~97 % of the 5,970 tablets, capsules, and caplets in DrOn. We represented binding-as-substrate and binding-as-inhibitor dispositions to two cytochrome P450 (CYP) isoenzymes (CYP2C19 and CYP2D6) and linked these dispositions to 65 compounds. It is now possible to query DrOn automatically for all drug products that contain active

  1. Elemental Impurities in Pharmaceutical Excipients.

    Science.gov (United States)

    Li, Gang; Schoneker, Dave; Ulman, Katherine L; Sturm, Jason J; Thackery, Lisa M; Kauffman, John F

    2015-12-01

    Control of elemental impurities in pharmaceutical materials is currently undergoing a transition from control based on concentrations in components of drug products to control based on permitted daily exposures in drug products. Within the pharmaceutical community, there is uncertainty regarding the impact of these changes on manufactures of drug products. This uncertainty is fueled in part by a lack of publically available information on elemental impurity levels in common pharmaceutical excipients. This paper summarizes a recent survey of elemental impurity levels in common pharmaceutical excipients as well as some drug substances. A widely applicable analytical procedure was developed and was shown to be suitable for analysis of elements that are subject to United States Pharmacopoeia Chapter and International Conference on Harmonization's Q3D Guideline on Elemental Impurities. The procedure utilizes microwave-assisted digestion of pharmaceutical materials and inductively coupled plasma mass spectrometry for quantitative analysis of these elements. The procedure was applied to 190 samples from 31 different excipients and 15 samples from eight drug substances provided through the International Pharmaceutical Excipient Council of the Americas. The results of the survey indicate that, for the materials included in the study, relatively low levels of elemental impurities are present. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association.

  2. Screening of several excipients for direct compression of tablets: A new perspective based on functional properties

    Directory of Open Access Journals (Sweden)

    John Rojas

    2013-01-01

    Full Text Available Excipients are widely used to formulate solid drug forms by direct compression. However, the powderforming and tableting properties of these excipients are affected by the presence of lubricants and active ingredients. In this study, a screening methodology was employed to test the performance of an excipient for direct compression. The effects of three lubricants (magnesium stearate, stearic acid and talc on the compressibility and compaction of these excipients were assessed by the compressibility index and lubricant sensitivity ratio, respectively. Likewise, the dilution potential in blends with a poorly compactible drug such as acetaminophen was also assessed. Finally, the elastic recovery of tablets was evaluated five days after production. All lubricants increased the compressibility of these excipients and improved their flowability. However, hydrophobic lubricants such as magnesium stearate had a marked negative effect on compactibility, especially in plastic-deforming and more regularlyshaped materials with a smooth surface such as Starch 1500. Alginic acid, rice and cassava starches had the largest elastic recovery (>5%, indicating a tendency to cap. Moreover, highly plastic deforming materials such as sorbitol and polyvinylpyrrolidone (PVP-K30 exhibited the best dilution potential (~10%, whereas alginic acid showed a very high value (~70%. In terms of performance, sorbitol, PVP-K30, Avicel PH-101, sodium alginate and pregelatinized starch were the most appropriate excipients for the direct compression of drugs.

  3. Quality Risk Management of Compliant Excipients

    Directory of Open Access Journals (Sweden)

    Brian Carlin

    2012-12-01

    Full Text Available Raw material compliance and GMP do not eliminate variability. Quality by Design should minimize the risk that raw material variability will adversely affect the finished product Critical Quality Attributes. The sources of technological risk from excipients are reviewed and approaches to excipient risk management are discussed. Supplier involvement throughout the product life-cycle is recommended to minimize excipient-related risk.

  4. Surface acidity and solid-state compatibility of excipients with an acid-sensitive API: case study of atorvastatin calcium.

    Science.gov (United States)

    Govindarajan, Ramprakash; Landis, Margaret; Hancock, Bruno; Gatlin, Larry A; Suryanarayanan, Raj; Shalaev, Evgenyi Y

    2015-04-01

    The objectives of this study were to measure the apparent surface acidity of common excipients and to correlate the acidity with the chemical stability of an acid-sensitive active pharmaceutical ingredient (API) in binary API-excipient powder mixtures. The acidity of 26 solid excipients was determined by two methods, (i) by measuring the pH of their suspensions or solutions and (ii) the pH equivalent (pHeq) measured via ionization of probe molecules deposited on the surface of the excipients. The chemical stability of an API, atorvastatin calcium (AC), in mixtures with the excipients was evaluated by monitoring the appearance of an acid-induced degradant, atorvastatin lactone, under accelerated storage conditions. The extent of lactone formation in AC-excipient mixtures was presented as a function of either solution/suspension pH or pHeq. No lactone formation was observed in mixtures with excipients having pHeq > 6, while the lactone levels were pronounced (> 0.6% after 6 weeks at 50°C/20% RH) with excipients exhibiting pHeq 6, 3-6, and < 3) were consistent with the reported solution pH-stability profile of AC. In contrast to the pHeq scale, lactone formation did not show any clear trend when plotted as a function of the suspension/solution pH. Two mechanisms to explain the discrepancy between the suspension/solution pH and the chemical stability data were discussed. Acidic excipients, which are expected to be incompatible with an acid-sensitive API, were identified based on pHeq measurements. The incompatibility prediction was confirmed in the chemical stability tests using AC as an example of an acid-sensitive API.

  5. Cytotoxicity of Different Excipients on RPMI 2650 Human Nasal Epithelial Cells

    Directory of Open Access Journals (Sweden)

    Tamás Horváth

    2016-05-01

    Full Text Available The nasal route receives a great deal of attention as a non-invasive method for the systemic administration of drugs. For nasal delivery, specific formulations containing excipients are used. Because of the sensitive respiratory mucosa, not only the active ingredients, but also additives need to be tested in appropriate models for toxicity. The aim of the study was to measure the cytotoxicity of six pharmaceutical excipients, which could help to reach larger residence time, better permeability, and increased solubility dissolution rate. The following excipients were investigated on RPMI 2650 human nasal septum tumor epithelial cells: β-d-mannitol, sodium hyaluronate, α and β-cyclodextrin, polyvinyl alcohol and methylcellulose. 3-(4,5-dimethyltiazol-2-yl-2,5-diphenyltetrazolium bromide (MTT dye conversion assay and real-time impedance analysis were used to investigate cytotoxicity. No excipient showed toxicity at 0.3% (w/v concentration or below while 1% concentration a significantly reduced metabolic activity was measured by MTT assay for methylcellulose and cyclodextrins. Using impedance measurements, only β-cyclodextrin (1% was toxic to cells. Mannitol at 1% concentration had a barrier opening effect on epithelial cells, but caused no cellular damage. Based on the results, all additives at 0.3%, sodium hyaluronate and polyvinyl alcohol at 1% concentrations can be safely used for nasal formulations.

  6. Risk assessment of supply chain for pharmaceutical excipients with AHP-fuzzy comprehensive evaluation.

    Science.gov (United States)

    Li, Maozhong; Du, Yunai; Wang, Qiyue; Sun, Chunmeng; Ling, Xiang; Yu, Boyang; Tu, Jiasheng; Xiong, Yerong

    2016-04-01

    As the essential components in formulations, pharmaceutical excipients directly affect the safety, efficacy, and stability of drugs. Recently, safety incidents of pharmaceutical excipients posing seriously threats to the patients highlight the necessity of controlling the potential risks. Hence, it is indispensable for the industry to establish an effective risk assessment system of supply chain. In this study, an AHP-fuzzy comprehensive evaluation model was developed based on the analytic hierarchy process and fuzzy mathematical theory, which quantitatively assessed the risks of supply chain. Taking polysorbate 80 as the example for model analysis, it was concluded that polysorbate 80 for injection use is a high-risk ingredient in the supply chain compared to that for oral use to achieve safety application in clinic, thus measures should be taken to control and minimize those risks.

  7. Effect of Reprocessing and Excipient Characteristics on Ibuprofen ...

    African Journals Online (AJOL)

    Methods: The effect of excipient type, technology and reprocessing on flow, compressibility and compactibility was assessed using and 8x2x2 factorial design. Design Expert® v.8.01 software was employed for data analysis. Pure excipients were processed by direct compression, while the ibuprofen:excipient mixtures were ...

  8. Development and evaluation of a tripartite novel excipient for direct ...

    African Journals Online (AJOL)

    Various batches (A-E) of the novel excipient was prepared by co-processing varying concentrations of okro gum with gelatinized maize starch and lactose using ... Drug-novel excipient compatibility was investigated using FTIR. ... FTIR analyses revealed no interaction between the novel excipient and salbutamol.

  9. Vendor qualification for pharmaceutical excipients--GMP requirements and approach.

    Science.gov (United States)

    Patel, K T; Chotal, N P

    2010-11-01

    Excipients are, in the large majority of cases, not made specifically for pharmaceutical use. Most pharmaceutical excipient manufacturers supply less than 10% of the total production of that particular material for pharmaceutical use. Excipient product portfolio consists of hundreds of products differing in chemistry, origin and functionality and they are used in many different applications. The days of treating excipients like commodities and buying them without fully qualifying the source and the entire distribution chain have gone by as GMP regulations demands to ensure quality of other materials used in the manufacturing process. The paradigm that exists in some pharmaceutical companies today where excipients are sourced from distributors without knowing the actual manufacturer, manufacturing site and full distribution lifecycle chain to be changed. The present contribution gives an overview about the current moves on GMP requirements for pharmaceutical excipient and approach for qualification of pharmaceutical excipient manufacturers.

  10. Hospitalised neonates in Estonia commonly receive potentially harmful excipients

    Directory of Open Access Journals (Sweden)

    Lass Jana

    2012-08-01

    Full Text Available Abstract Background Information on the neonatal exposure to excipients is limited. Our aim was to describe the extent of excipient intake by Estonian neonates; to classify the excipients according to potential neonatal toxicity and thereby to measure the extent of exposure of neonates to potentially harmful excipients. Methods A prospective cohort study that recorded all medicines prescribed to patients aged below 28 days admitted to Tartu University Hospital from 01.02-01.08 2008 and to Tallinn Children’s Hospital from 01.02- 01.08 2009 was conducted. Excipients were identified from Summaries of Product Characteristics and classified according to toxicity following a literature review. Results 1961 prescriptions comprising 107 medicines were written for 348/490 neonates admitted. A total of 123 excipients were found in 1620 (83% prescriptions and 93 (87% medicines. 47 (38% of these excipients were classified as potentially or known to be harmful to neonates. Most neonates (97% received at least one medicine (median number 2 with potentially or known to be harmful excipient. Parabens were the most commonly used known to be harmful excipients and sodium metabisulphite the most commonly used potentially harmful excipient, received by 343 (99% and 297 (85% of treated neonates, respectively. Conclusions Hospitalised neonates in Estonia are commonly receiving a wide range of excipients with their medication. Quantitative information about excipients should be made available to pharmacists and neonatologists helping them to take into account excipient issues when selecting medicines and to monitor for adverse effects if administration of medicines containing excipients is unavoidable.

  11. Formulation strategy and use of excipients in pulmonary drug delivery.

    Science.gov (United States)

    Pilcer, Gabrielle; Amighi, Karim

    2010-06-15

    Pulmonary administration of drugs presents several advantages in the treatment of many diseases. Considering local and systemic delivery, drug inhalation enables a rapid and predictable onset of action and induces fewer side effects than other routes of administration. Three main inhalation systems have been developed for the aerosolization of drugs; namely, nebulizers, pressurized metered-dose inhalers (MDIs) and dry powder inhalers (DPIs). The latter are currently the most convenient alternative as they are breath-actuated and do not require the use of any propellants. The deposition site in the respiratory tract and the efficiency of inhaled aerosols are critically influenced by the aerodynamic diameter, size distribution, shape and density of particles. In the case of DPIs, since micronized particles are generally very cohesive and exhibit poor flow properties, drug particles are usually blended with coarse and fine carrier particles. This increases particle aerodynamic behavior and flow properties of the drugs and ensures accurate dosage of active ingredients. At present, particles with controlled properties are obtained by milling, spray drying or supercritical fluid techniques. Several excipients such as sugars, lipids, amino acids, surfactants, polymers and absorption enhancers have been tested for their efficacy in improving drug pulmonary administration. The purpose of this article is to describe various observations that have been made in the field of inhalation product development, especially for the dry powder inhalation formulation, and to review the use of various additives, their effectiveness and their potential toxicity for pulmonary administration. Copyright 2010 Elsevier B.V. All rights reserved.

  12. Natural polymers, gums and mucilages as excipients in drug delivery.

    Science.gov (United States)

    Kumar, Shobhit; Gupta, Satish Kumar

    2012-01-01

    Use of natural polymers, gums and mucilages in drug delivery systems has been weighed down by the synthetic materials. Natural based excipients offered advantages such as non-toxicity, less cost and abundantly availablity. Aqueous solubility of natural excipients plays an important role in their selection for designing immediate, controlled or sustained release formulations. This review article provide an overview of natural gum, polymers and mucilages as excipients in dosage forms as well as novel drug delivery systems.

  13. Will blockchain technology revolutionize excipient supply chain management?

    OpenAIRE

    Shireesh Apte; Nikolai Petrovsky

    2016-01-01

    Blockchain technology provides a major advance for excipient supply chains, assisting in the delivery of unadulterated, source, process and transit verifiable excipients (or APIs and drug products), but does not alleviate the necessity for quality audits. The adoption of blockchain technology should make the process faster and make the transactional record more robust and reliable, however other rate-limiting steps of the excipient supply chain including transit ...

  14. Hypersensitivity Reactions from Excipients in Systemic Glucocorticoid Formulations

    DEFF Research Database (Denmark)

    Calogiuri, Gianfranco; Garvey, Lene H; Romita, Paolo

    2016-01-01

    Glucocorticoids are the most widely used drugs for the treatment of hypersensitivity, however these drugs themselves and the excipients contained in commercial corticosteroid formulations are able to induce severe immediate-type hypersensitivity reactions. Reactions involving excipients have been...... confirmed to be IgE mediated by the demonstration of specific-IgE to excipients such as carboxymethylcellulose and lactose. In case of hypersensitivity reactions to corticosteroid preparations, a complete allergy work-up with skin tests and/or challenge tests should include testing excipients as well...

  15. New co-processed MCC-based excipient for fast release of low solubility drugs from pellets prepared by extrusion-spheronization.

    Science.gov (United States)

    Goyanes, Alvaro; Martínez-Pacheco, Ramón

    2015-03-01

    In this study, a new co-processed excipient composed of microcrystalline cellulose (MCC), sorbitol, chitosan and Eudragit® E, easily obtained by wet massing, to increase the dissolution rate of active ingredients of low water solubility from pellets prepared by extrusion-spheronization is evaluated. Indomethacin, nifedipine, furosemide, ibuprofen, prednisolone and hydrochlorothiazide are used as model drugs of different solubility. All pellet formulations evaluated showed adequate morphological, flow and mechanical properties. Pellets prepared with the co-processed excipient show a higher drug dissolution rate than those prepared with MCC and even higher than the pure drug powder. The fast drug dissolution and the complete disintegration (co-processed mixture. In conclusion, this new co-processed excipient is very suitable to increase the dissolution rate of poorly soluble drugs from pellets prepared by extrusion-spheronization. Moreover, the drug release rate can be estimated from the Ln of the drug solubility in acidic medium.

  16. PHYSICAL (INACTIVITY AND WOMEN

    Directory of Open Access Journals (Sweden)

    Nina Đukanović

    2008-08-01

    Full Text Available Physical activity simply means movement of the body that uses energy. Physical inactivity is more common among women than men. In women physical activity reduces the risk of dying from coronary heart disease and stroke and of developing high blood pressure, diabetes mellitus, reduces blood cholesterol level, helps control weight and reduce body fat, helps control and prevention osteoporosis and artritis, reduces symptoms of anxiety and depression, reduces the risk for breast cancer. From health benefits, physical activity should be moderate or vigorous and add up to at the least 30 minutes a day.

  17. Exercise Responses after Inactivity

    Science.gov (United States)

    Convertino, Victor A.

    1986-01-01

    The exercise response after bed rest inactivity is a reduction in the physical work capacity and is manifested by significant decreases in oxygen uptake. The magnitude of decrease in maximal oxygen intake V(dot)O2max is related to the duration of confinement and the pre-bed-rest level of aerobic fitness; these relationships are relatively independent of age and gender. The reduced exercise performance and V(dot)O2max following bed rest are associated with various physiological adaptations including reductions in blood volume, submaximal and maximal stroke volume, maximal cardiac output, sceletal muscle tone and strength, and aerobic enzyme capacities, as well as increases in venous compliance and submaximal and maximal heart rate. This reduction in physiological capacity can be partially restored by specific countermeasures that provide regular muscular activity or orhtostatic stress or both during the bed rest exposure. The understanding of these physiological and physical responses to exercise following bed rest inactivity has important implications for the solution to safety and health problems that arise in clinical medicine, aerospace medicine, sedentary living, and aging.

  18. Investigation of nanocarriers and excipients for preparation of nanoembedded microparticles

    DEFF Research Database (Denmark)

    Wang, Yingya; Beck-broichsitter, Moritz; Yang, Mingshi

    2017-01-01

    polymer nanocarriers (poly(lactide-co-glycolide), poly(styrene), chitosan and dendrimers) were used for preparing NEMs by spray-drying. Further, distinct matrix excipients were investigated including sugars (i.e., trehalose, sucrose, mannitol) and polymers (poly(vinyl pyrrolidone) and poly(ethylene glycol......:1 and 10:1, respectively, whereas NEMs with poly(styrene) and poly(lactide-co-glycolide) only required an M:N ratio of 1:1 and 1:4, respectively. Investigation of different excipients demonstrated that water soluble sugars and polymers can be used to prepare NEMs and that spray-dried amorphous excipients...

  19. Contact allergy to ingredients of topical medications : results of the European Surveillance System on Contact Allergies (ESSCA), 2009-2012

    NARCIS (Netherlands)

    Uter, Wolfgang; Spiewak, Radoslaw; Cooper, Susan M.; Wilkinson, Mark; Sanchez Perez, Javier; Schnuch, Axel; Schuttelaar, Marie-Louise

    2016-01-01

    PurposeThe aim of this study was to give an overview of the prevalence of contact allergy to active ingredients and excipients of topical medications across Europe. MethodsRetrospective analysis of data collected by the European Surveillance System on Contact Allergies () with substances applied to

  20. Medicated ocular bandages and corneal health: potential excipients and active pharmaceutical ingredients.

    Science.gov (United States)

    Zidan, Ghada; Rupenthal, Ilva D; Greene, Carol; Seyfoddin, Ali

    2018-03-01

    Corneal blindness can occur due to improper healing of the corneal tissues after induced injury or abrasion which can be accidental, pathogenic, or after corneal surgery. Abnormal regulation of the healing mechanisms can lead to corneal opacity. Reducing inflammation and promoting epithelial wound healing are crucial for scar-free corneal recovery without eyesight complications. Current approaches for corneal wound healing involve amniotic membrane (AM) bandages, bandage contact lenses (BCL), and collagen shields in conjunction with frequent administration of therapeutic eye drops. The problem with eye drops is poor bioavailability and patient incompliance that might lead to corneal wound healing complications and poor clinical outcomes. Various methods have been proposed for loading drugs into medicated bandage lenses. There are advantages and limitations associated with each technique regarding the ease of manufacture, drug loading, release kinetics, and suitability with various therapeutics and hydrogel types. There is still, however, no drug-eluting corneal bandage on the market despite the need for such a convenient and cost-efficient strategy for corneal wound healing. This review will highlight materials and therapeutics that can be used in medicated ocular bandages and various ways of incorporating drugs, while discussing the limitations and challenges associated with bringing medicated ocular bandages in the market.

  1. Application of instrumented nanoindentation in preformulation studies of pharmaceutical active ingredients and excipients

    Directory of Open Access Journals (Sweden)

    Egart Mateja

    2016-09-01

    Full Text Available Nanoindentation allows quantitative determination of a material’s response to stress such as elastic and plastic deformation or fracture tendency. Key instruments that have enabled great advances in nanomechanical studies are the instrumented nanoindenter and atomic force microscopy. The versatility of these instruments lies in their capability to measure local mechanical response, in very small volumes and depths, while monitoring time, displacement and force with high accuracy and precision.

  2. Application of instrumented nanoindentation in preformulation studies of pharmaceutical active ingredients and excipients

    OpenAIRE

    EGART, MATEJA; JANKOVIĆ, BILJANA; SRČIČ, STANE

    2016-01-01

    Nanoindentation allows quantitative determination of a material’s response to stress such as elastic and plastic deformation or fracture tendency. Key instruments that have enabled great advances in nanomechanical studies are the instrumented nanoindenter and atomic force microscopy. The versatility of these instruments lies in their capability to measure local mechanical response, in very small volumes and depths, while monitoring time, displacement and force with high accuracy and precision...

  3. Drug-Excipient Interactions in the Solid State: The Role of Different Stress Factors.

    Science.gov (United States)

    Gressl, Corinna; Brunsteiner, Michael; Davis, Adrian; Landis, Margaret; Pencheva, Klimentina; Scrivens, Garry; Sluggett, Gregory W; Wood, Geoffrey P F; Gruber-Woelfler, Heidrun; Khinast, Johannes G; Paudel, Amrit

    2017-12-04

    Understanding properties and mechanisms that govern drug degradation in the solid state is of high importance to ensure drug stability and safety of solid dosage forms. In this study, we attempt to understand drug-excipient interactions in the solid state using both theoretical and experimental approaches. The model active pharmaceutical ingredients (APIs) under study are carvedilol (CAR) and codeine phosphate (COP), which are known to undergo esterification with citric acid (CA) in the solid state. Starting from the crystal structures of two different polymorphs of each compound, we calculated the exposure and accessibility of reactive hydroxyl groups for a number of relevant crystal surfaces, as well as descriptors that could be associated with surface stabilities using molecular simulations. Accelerated degradation experiments at elevated temperature and controlled humidity were conducted to assess the propensity of different solid forms of the model APIs to undergo chemical reactions with anhydrous CA or CA monohydrate. In addition, for CAR, we studied the solid state degradation at varying humidity levels and also under mechano-activation. Regarding the relative degradation propensities, we found that variations in the exposure and accessibility of molecules on the crystal surface play a minor role compared to the impact of molecular mobility due to different levels of moisture. We further studied drug-excipient interactions under mechano-activation (comilling of API and CA) and found that the reaction proceeded even faster than in physical powder mixtures kept at accelerated storage conditions.

  4. Extraction characterization and evaluation of selected mucilage as pharmaceutical excipient.

    Science.gov (United States)

    Malviya, Rishabha

    2011-01-01

    Natural polymers have been used in different pharmaceutical formulations. They are easily available, non-toxic, biodegradable and cost effective to be used as pharmaceutical excipient. In present investigation mucilage was extracted from fruit of Hibiscus esculentus and further characterized to be used as pharmaceutical excipient. Tablets were prepared using four different concentrations (6.6%, 13.3%, 20%, 26.66%) of Hibiscus esculentus mucilage and potato starch to evaluate binding properties of mucilage. Results obtained from the micromeritic characterization and flow behavior showed that Hibiscus esculentus mucilage is a good candidate to be used as pharmaceutical excipient. Tablets prepared using mucilage showed relatively lesser friability than prepared with starch. It was found that release of drug from tablets prepared with mucilage was less as compared to prepared with starch. Findings of the different results easily predict the fact that mucilage obtained from Hibiscus esculentus has characteristics to be used as pharmaceutical excipient.

  5. Excipient Usage Technical Risk Assessment for Generic Solid Dose Products

    Directory of Open Access Journals (Sweden)

    Ajay Babu Pazhayattil

    2017-09-01

    Full Text Available This paper proposes an assessment methodology for solid dose generic small molecule drug products. It addresses the ‘usage of the excipient’ portion of the trinomial by utilizing the systematic approach of Risk Identification, Risk Analysis and Risk Evaluation as per ICH Q9 Quality Risk Management outlined for developing risk control strategies. The assessment and maintenance of excipient risk profile is essential to minimize any potential risk associated to excipients impacting patients.

  6. Chitin and Chitosan as Direct Compression Excipients in Pharmaceutical Applications

    Directory of Open Access Journals (Sweden)

    Adnan A. Badwan

    2015-03-01

    Full Text Available Despite the numerous uses of chitin and chitosan as new functional materials of high potential in various fields, they are still behind several directly compressible excipients already dominating pharmaceutical applications. There are, however, new attempts to exploit chitin and chitosan in co-processing techniques that provide a product with potential to act as a direct compression (DC excipient. This review outlines the compression properties of chitin and chitosan in the context of DC pharmaceutical applications.

  7. Formulation and evaluation of antipsoriatic gel using natural excipients

    OpenAIRE

    Raghupatruni Jhansi Laxmi; R. Karthikeyan; P. Srinivasa Babu; R.V.V. Narendra Babu

    2013-01-01

    Objective: To develop topical gel formulations of Psoralen using natural excipients to minimize the side effects of synthetic drugs. Methods: The Psoralen gel formulations were prepared using different natural gums and polymers. The physicochemical compatibility between Psoralen and other excipients was confirmed by using Fourier transform infrared spectroscopy. All prepared gel formulations were evaluated for drug content uniformity, viscosity, pH, and stability. The release of psoralen f...

  8. Chitin and Chitosan as Direct Compression Excipients in Pharmaceutical Applications

    Science.gov (United States)

    Badwan, Adnan A.; Rashid, Iyad; Al Omari, Mahmoud M.H.; Darras, Fouad H.

    2015-01-01

    Despite the numerous uses of chitin and chitosan as new functional materials of high potential in various fields, they are still behind several directly compressible excipients already dominating pharmaceutical applications. There are, however, new attempts to exploit chitin and chitosan in co-processing techniques that provide a product with potential to act as a direct compression (DC) excipient. This review outlines the compression properties of chitin and chitosan in the context of DC pharmaceutical applications. PMID:25810109

  9. In vitro evaluation of extemporaneously compounded immediate-release capsules with premixed excipients, based on the biopharmaceutics classification system (BCS) of the drugs.

    Science.gov (United States)

    Pinheiro, Vanessa A; Danopoulos, Panagiota; Demirdjian, Lara; Nogueira, Rodrigo J L; Dubois, Fanny

    2013-01-01

    Hard-capsule compounding plays an essential role in drug delivery for pharmaceutical application. Versatile and easy to use, capsules represent a popular dosage form for patients. Nevertheless, bioavailability of the drugs compounded in hard capsules is not always optimized and choosing the appropriate excipients is a key factor to improve the dissolution kinetics of active pharmaceutical ingredients. The Biopharmaceutical Classification System, which categorizes drugs regarding their solubility and permeability, is a unique tool which can be used to select the most compatible excipients for a particular drug when compounding immediate-release capsules. The aim of this study was to evaluate the efficiency of premixed excipient blends called CapsuBlend Excipients, based on the Biopharmaceutical Classification System concept, for drug dissolution rate and absorption enhancement. Drug assay and dissolution profiles were studied for three batches of metronidazole 250-mg, theophylline 100-mg, and levocarnitine 250-mg capsules, each respectively representing a highly soluble, poorly soluble, and hygroscopic drug. Methods followed the specifications set forth in the United States Pharmacopeia. Assay results demonstrated that each batch of metronidazole 250 mg, theophylline 100 mg, and levocarnitine 250 mg contained not less than 90.0% of and not more than 110.0% of the labeled amount of drug, which is in accordance with the United States Pharmacopeia requirements. Moreover, dissolution profile results for the aforementioned capsules depicted dissolution values meeting the Pharmacopeial criteria of acceptance. These results reinforce the fact that the Biopharmaceutical Classification System concept represents a valuable guideline for formulation chemists or pharmacists to assist them for capsule compounding. To ensure a high level of efficiency of compounded capsules, premixed excipient blends, carefully developed by taking into consideration the solubility and

  10. Functional Salad Dressing as an Excipient Food

    Directory of Open Access Journals (Sweden)

    Sibel Karakaya

    2015-11-01

    Full Text Available The aim of this study is to develop salad dressing as an excipient food that can be used to enhance beneficial effects of salads when co-ingested together. The compounds that include bioactive constituents different from other salad dressings are germinated seed and sprouts of lentils and cowpeas, and caseinomacropeptide isolated from whey. The proximate composition, total phenols and total flavonoids of salad dressing were determined. Its beneficial effects on health (antioxidant activity, antidiabetic activity, bile acid binding capacity, and angiotensin converting enzyme inhibitory activity were determined using in vitro methods.
Energy value of salad dressing is 111 kcal/100 g and 11.41% of the energy value of the salad dressing is provided by protein. Total phenol content is 79 mg CE/100 g. Salad dressing displayed higher antioxidant activity against DPPH radical (130 mM Trolox/100 g than that of ORAC value (72 mM Trolox/100 g. Salad dressing inhibited ACE by approximately 37%. Expected glycemic index of salad dressing was 74.0 and belongs to high glycemic index foods. Contrary to, salad dressing inhibited α-glucosidase and α-amylase with the IC50 values 1.77 mg protein/mL and 2.40 mg protein/mL, respectively. Relative to cholestyramine, bile acid binding capacity of salad dressing is 39.85%.

  11. New feed ingredients

    NARCIS (Netherlands)

    Raamsdonk, van L.W.D.; Fels-Klerx, van der H.J.; Jong, de J.

    2017-01-01

    In the framework of sustainability and a circular economy, new ingredients for feed are desired and, to this end, initiatives for implementing such novel ingredients have been started. The initiatives include a range of different sources, of which insects are of particular interest. Within the

  12. Thermal properties of compacted pharmaceutical excipients.

    Science.gov (United States)

    Krok, Alexander; Vitorino, Nuno; Zhang, Jianyi; Frade, Jorge Ribeiro; Wu, Chuan-Yu

    2017-12-20

    Thermal properties of powders are critical material attributes that control temperature rise during tableting and roll compaction. In this study, various analytical methods were used to measure the thermal properties of widely used pharmaceutical excipients including microcrystalline cellulose (MCC) of three different grades (Avicel PH 101; Avicel PH 102 and Avicel DG), lactose and mannitol. The effect of relative density on the measured thermal properties was investigated by compressing the powders into specimen of different relative densities. Differential thermal analysis (DTA) was employed to explore endothermic or exothermic events in the temperature range endured during typical pharmaceutical manufacturing processes, such as tabletting and roll compaction. Thermogravimetric analysis (TGA) was performed to analyse the water/solvent content, either in the form as solvates or as loosely bound molecules on the particle surface. Thermal conductivity analysis (TCA) was conducted to measure thermal conductivity and volumetric heat capacity. It is shown that, for the MCC powders, almost no changes in morphology or structural changes were observed during heating to temperatures up to 200°C. An increase in relative density or temperature leads to a high thermal conductivity and the volumetric heat capacity. Among all MCC powders considered, Avicel DG showed the highest increase in thermal conductivity and the volumetric heat capacity, but this heat capacity was not sensitive to the measurement temperature. For lactose and mannitol, some endothermic events occurred during heating. The thermal conductivity increased with the increase in temperature and relative density. A model was also developed to describe the variation of the thermal conductivity and the volumetric heat capacity with the relative density and the temperature. It was shown that the empirical model can well predict the dependency of the thermal conductivity and the volumetric heat capacity on the

  13. Ingredients: where pet food starts.

    Science.gov (United States)

    Thompson, Angele

    2008-08-01

    Every clinician is asked "What should I feed my pet?" Understanding the ingredients in pet food is an important part of making the best recommendation. Pet food can be as simple as one ingredient or as complicated as containing more than 60 ingredients. Pet food and its ingredients are regulated by the Food and Drug Administration and state feed officials. Part of that regulation is the review and definition of ingredients. Existing ingredients change and new ingredients become available so the need for ingredient definitions grows. Ingredients for product formulations are chosen based on their nutrient content, digestibility, palatability, functionality, availability, and cost. As an example, a typical, nutritionally complete dry dog food with 42 ingredients is examined and the ingredients are discussed here. Safe, healthy pet food starts with safe ingredients sourced from well-monitored suppliers. The ultimate goal of both veterinarians and pet food manufacturers is the same--long healthy lives for dogs and cats.

  14. Risk evaluation of impurities in topical excipients: The acetol case

    Directory of Open Access Journals (Sweden)

    Jente Boonen

    2014-10-01

    Full Text Available Pharmaceutical excipients for topical use may contain impurities, which are often neglected from a toxicity qualification viewpoint. The possible impurities in the most frequently used topical excipients were evaluated in-silico for their toxicity hazard. Acetol, an impurity likely present in different topical pharmaceutical excipients such as propylene glycol and glycerol, was withheld for the evaluation of its health risk after dermal exposure.An ex-vivo in-vitro permeation study using human skin in a Franz Diffusion Cell set-up and GC as quantification methodology showed a significant skin penetration with an overall Kp value of 1.82×10−3 cm/h. Using these data, limit specifications after application of a dermal pharmaceutical product were estimated. Based on the TTC approach of Cramer class I substances, i.e. 1800 µg/(day∙person, the toxicity-qualified specification limits of acetol in topical excipients were calculated to be 90 µg/mL and 180 µg/mL for propylene glycol and glycerol, respectively.It is concluded that setting specification limits for impurities within a quality-by-design approach requires a case-by-case evaluation as demonstrated here with acetol. Keywords: Acetol, Impurity, Excipients, Transdermal penetration, Specification limits

  15. Types of Pesticide Ingredients

    Science.gov (United States)

    Pesticide active ingredients are described by the types of pests they control or how they work. For example, algicides kill algae, biopesticides are derived from natural materials, and insecticides kill insects.

  16. Dietary Supplement Ingredient Database

    Science.gov (United States)

    ... and US Department of Agriculture Dietary Supplement Ingredient Database Toggle navigation Menu Home About DSID Mission Current ... values can be saved to build a small database or add to an existing database for national, ...

  17. The pandemic of physical inactivity

    DEFF Research Database (Denmark)

    Kohl, Harold W; Craig, Cora Lynn; Lambert, Estelle Victoria

    2012-01-01

    the 1950s, promotion to improve the health of populations has lagged in relation to the available evidence and has only recently developed an identifiable infrastructure, including efforts in planning, policy, leadership and advocacy, workforce training and development, and monitoring and surveillance......Physical inactivity is the fourth leading cause of death worldwide. We summarise present global efforts to counteract this problem and point the way forward to address the pandemic of physical inactivity. Although evidence for the benefits of physical activity for health has been available since...

  18. THE SKIN TOLERANCE OF SHEA FAT EMPLOYED AS EXCIPIENT ...

    African Journals Online (AJOL)

    The skin tolerance of shea fat when used as excipient in topical products has been investigated. Skin irritation or sensitivity testing was carried out in a preliminary skin patch-application pilot study of graded extemporaneous formulations of the indigenous shea fat base with 25 volunteers. A field study by interview was also ...

  19. Effect of Reprocessing and Excipient Characteristics on Ibuprofen ...

    African Journals Online (AJOL)

    increased upon reprocessing. Moreover, most of the pure excipients processed by direct compression had an increase in porosity after reprocessing. This implies an increase in the number of spaces between fine particles, increase of specific surface area and reduction of powder density keeping a large amount of air.

  20. Functional ingredients from microalgae

    NARCIS (Netherlands)

    Buono, S.; Langellotti, A.L.; Martello, A.; Rinna, F.; Fogliano, V.

    2014-01-01

    A wide variety of natural sources are under investigation to evaluate their possible use for new functional ingredient formulation. Some records attested the traditional and ancient use of wild harvested microalgae as human food but their cultivation for different purposes started about 40 years

  1. Understanding Female Inactivity in Malta

    Directory of Open Access Journals (Sweden)

    Rose Marie Azzopardi

    2014-12-01

    Full Text Available This empirical study is based in Malta, a small island state with the highest rate of economically inactive women in the European Union (EU. Using a random sample of 402 inactive female homemakers, the responses to a telephone survey revealed that (a this inactive group is motivated by aspects of social and economic well-being and to a lesser extent by aspects of personal and professional development; (b work hindrances include low wages, family responsibilities, and a dependency on social security contributions/benefits; (c the intention to work in the future is significantly associated with work motives, work hindrances, and demographic variables, resulting in an overall holdout accuracy of 84.8%; and (d the respondents would be encouraged to work if there are more supportive/flexible work structures available for working mothers, equal opportunities for women at the workplace, and employment opportunities through in-work benefits that make work pay (particularly for those aged 40+, with limited skills and with low work intensity. The findings are discussed, and the study concludes by providing four policy recommendations aimed at addressing the present shortcomings of the Maltese labor market.

  2. Vascular adaption to physical inactivity in humans

    NARCIS (Netherlands)

    Bleeker, M.W.P.

    2006-01-01

    This thesis presents studies on vascular adaptation to physical inactivity and deconditioning. Although it is clear that physical inactivity is an important risk factor for cardiovascular disease, the underlying physiological mechanisms have not yet been elucidated. In contrast to physical

  3. Vascular adaptation to physical inactivity in humans.

    NARCIS (Netherlands)

    Bleeker, M.W.P.

    2006-01-01

    This thesis presents studies on vascular adaptation to physical inactivity and deconditioning. Although it is clear that physical inactivity is an important risk factor for cardiovascular disease, the underlying physiological mechanisms have not yet been elucidated. In contrast to physical

  4. Health Risks of an Inactive Lifestyle

    Science.gov (United States)

    ... may develop a hormonal imbalance What are the health risks of an inactive lifestyle? Having an inactive ... the more sedentary you are, the higher your health risks are. How can I get started with ...

  5. Transdermal evaluation of caffeine in different formulations and excipients

    OpenAIRE

    Veryser, Lieselotte; Boonen, Jente; Mehuys, Els; ROCHE, NATHALIE; Remon, Jean Paul; Peremans, Kathelijne; Burvenich, Christian; De Spiegeleer, Bart

    2013-01-01

    Background: The stratum corneum(SC) forms adifficultphysical barrier fordrugs to pass through the skin. Several strategieswere developed to overcome this barrier.Optimization of topical drug formulations by selected excipients may facilitate the penetration of drugs through the SC into the viable skin cells and ultimately into the systemic circulation. Methods: Here, both the influence of two formulations (a classic carbomer-based gel and a novel Pluronic® lecithin organo gel (PLO gel)) an...

  6. Effect of Milling on DSC Thermogram of Excipient Adipic Acid

    OpenAIRE

    Ng, Wai Kiong; Kwek, Jin Wang; Yuen, Aaron; Tan, Chin Lee; Tan, Reginald

    2010-01-01

    The purpose of this research was to investigate why and how mechanical milling results in an unexpected shift in differential scanning calorimetry (DSC) measured fusion enthalpy (∆fusH) and melting point (Tm) of adipic acid, a pharmaceutical excipient. Hyper differential scanning calorimetry (hyper-DSC) was used to characterize adipic acid before and after ball-milling. An experimental study was conducted to evaluate previous postulations such as electrostatic charging using the Faraday cage ...

  7. Tamarind seed polysaccharide: A promising natural excipient for pharmaceuticals

    OpenAIRE

    Joshny Joseph; S N Kanchalochana; G Rajalakshmi; Vedha Hari; Ramya Devi Durai

    2012-01-01

    The natural polymers always have exceptional properties which make them distinct from the synthetic polymers and tamarind seed polysaccharide (TSP) is one such example which shows more valuable properties making it a useful excipient for a wide range of applications. TSP is a natural polysaccharide obtained from the seeds of Tamarindus indica, recently gaining a wide potential in the field of pharmaceutical and cosmetic industries. Its isolation and characterisation involve simple techniques ...

  8. Computational Prediction of Drug Solubility in Lipid Based Formulation Excipients

    OpenAIRE

    Persson, Linda C.; Porter, Christopher J. H.; Charman, William N.; Bergstr?m, Christel A. S.

    2013-01-01

    ABSTRACT Purpose To investigate if drug solubility in pharmaceutical excipients used in lipid based formulations (LBFs) can be predicted from physicochemical properties. Methods Solubility was measured for 30 structurally diverse drug molecules in soybean oil (SBO, long-chain triglyceride; TGLC), Captex355 (medium-chain triglyceride; TGMC), polysorbate 80 (PS80; surfactant) and PEG400 co-solvent and used as responses during PLS model development. Melting point and calculated molecular descrip...

  9. Drug-excipient compatibility studies in binary mixtures of avobenzone.

    Science.gov (United States)

    Ceresole, Rita; Han, Yong K; Rosasco, Maria A; Orelli, Liliana R; Segall, Adriana

    2013-01-01

    During preformulation studies of cosmetic/pharmaceutical products, thermal analysis techniques are very useful to detect physical or chemical incompatibilities between the active and the excipients of interest that might interfere with safety and/or efficacy of the final product. Differential scanning calorimetry (DSC) was used as a screening technique for assessing the compatibility of avobenzone with some currently used cosmetic excipients. In the first phase of the study, DSC was used as a tool to detect any interaction. Based on the DSC results alone, cetearyl alcohol, isopropyl myristate, propylparaben, diethylhexyl syringylidene malonate, caprylic capric triglyceride, butylated hydroxytoluene (BHT), glycerin, cetearyl alcohol/ceteareth 20, cetearyl alcohol/sodium lauryl sulfate/sodium cetearyl sulfate, and paraffinum liquidum exhibit interaction with avobenzone. Stressed binary mixtures (stored at 50°C for 15 days) of avobenzone and excipients were evaluated by high-performance liquid chromatography. Binary mixtures were further investigated by infrared (IR) spectroscopy. Based on DSC, isothermal stress testing, and fourier transform infrared results; avobenzone is incompatible with caprylic capric triglyceride, propylparaben, and BHT.

  10. Effects of excipients on the tensile strength, surface properties and free volume of Klucel® free films of pharmaceutical importance

    Science.gov (United States)

    Gottnek, Mihály; Süvegh, Károly; Pintye-Hódi, Klára; Regdon, Géza

    2013-08-01

    The physicochemical properties of polymers planned to be applied as mucoadhesive films were studied. Two types of Klucel® hydroxypropylcellulose (LF and MF) were used as film-forming polymers. Hydroxypropylcellulose was incorporated in 2 w/w% with glycerol and xylitol as excipients and lidocaine base as an active ingredient at 5, 10 or 15 w/w% of the mass of the film-forming polymer. The free volume changes of the films were investigated by positron annihilation lifetime spectroscopy, the mechanical properties of the samples were measured with a tensile strength tester and contact angles were determined to assess the surface properties of the films. It was found that the Klucel® MF films had better physicochemical properties than those of the LF films. Klucel® MF as a film-forming polymer with lidocaine base and both excipients at 5 w/w% exhibited physicochemical properties and good workability. The excipients proved to exert strong effects on the physicochemical properties of the tested systems and it is very important to study them intensively in preformulation studies in the pharmaceutical technology in order to utilise their benefits and to avoid any disadvantageous effects.

  11. Determination of drug, excipients and coating distribution in pharmaceutical tablets using NIR-CI

    Directory of Open Access Journals (Sweden)

    Anna Palou

    2012-04-01

    Full Text Available The growing interest of the pharmaceutical industry in Near Infrared-Chemical Imaging (NIR-CI is a result of its high usefulness for quality control analyses of drugs throughout their production process (particularly of its non-destructive nature and expeditious data acquisition. In this work, the concentration and distribution of the major and minor components of pharmaceutical tablets are determined and the spatial distribution from the internal and external sides has been obtained. In addition, the same NIR-CI allowed the coating thickness and its surface distribution to be quantified. Images were processed to extract the target data and calibration models constructed using the Partial Least Squares (PLS algorithms. The concentrations of Active Pharmaceutical Ingredient (API and excipients obtained for uncoated cores were essentially identical to the nominal values of the pharmaceutical formulation. But the predictive ability of the calibration models applied to the coated tablets decreased as the coating thickness increased. Keywords: Near infrared Chemical Imaging (NIR-CI, Hyperspectral imaging, Component distribution, Tablet coating distribution, Partial Least Squares (PLS regression

  12. An investigation into the effects of excipient particle size, blending techniques and processing parameters on the homogeneity and content uniformity of a blend containing low-dose model drug.

    Science.gov (United States)

    Alyami, Hamad; Dahmash, Eman; Bowen, James; Mohammed, Afzal R

    2017-01-01

    Powder blend homogeneity is a critical attribute in formulation development of low dose and potent active pharmaceutical ingredients (API) yet a complex process with multiple contributing factors. Excipient characteristics play key role in efficient blending process and final product quality. In this work the effect of excipient type and properties, blending technique and processing time on content uniformity was investigated. Powder characteristics for three commonly used excipients (starch, pregelatinised starch and microcrystalline cellulose) were initially explored using laser diffraction particle size analyser, angle of repose for flowability, followed by thorough evaluations of surface topography employing scanning electron microscopy and interferometry. Blend homogeneity was evaluated based on content uniformity analysis of the model API, ergocalciferol, using a validated analytical technique. Flowability of powders were directly related to particle size and shape, while surface topography results revealed the relationship between surface roughness and ability of excipient with high surface roughness to lodge fine API particles within surface groves resulting in superior uniformity of content. Of the two blending techniques, geometric blending confirmed the ability to produce homogeneous blends at low dilution when processed for longer durations, whereas manual ordered blending failed to achieve compendial requirement for content uniformity despite mixing for 32 minutes. Employing the novel dry powder hybrid mixer device, developed at Aston University laboratory, results revealed the superiority of the device and enabled the production of homogenous blend irrespective of excipient type and particle size. Lower dilutions of the API (1% and 0.5% w/w) were examined using non-sieved excipients and the dry powder hybrid mixing device enabled the development of successful blends within compendial requirements and low relative standard deviation.

  13. An investigation into the effects of excipient particle size, blending techniques and processing parameters on the homogeneity and content uniformity of a blend containing low-dose model drug.

    Directory of Open Access Journals (Sweden)

    Hamad Alyami

    Full Text Available Powder blend homogeneity is a critical attribute in formulation development of low dose and potent active pharmaceutical ingredients (API yet a complex process with multiple contributing factors. Excipient characteristics play key role in efficient blending process and final product quality. In this work the effect of excipient type and properties, blending technique and processing time on content uniformity was investigated. Powder characteristics for three commonly used excipients (starch, pregelatinised starch and microcrystalline cellulose were initially explored using laser diffraction particle size analyser, angle of repose for flowability, followed by thorough evaluations of surface topography employing scanning electron microscopy and interferometry. Blend homogeneity was evaluated based on content uniformity analysis of the model API, ergocalciferol, using a validated analytical technique. Flowability of powders were directly related to particle size and shape, while surface topography results revealed the relationship between surface roughness and ability of excipient with high surface roughness to lodge fine API particles within surface groves resulting in superior uniformity of content. Of the two blending techniques, geometric blending confirmed the ability to produce homogeneous blends at low dilution when processed for longer durations, whereas manual ordered blending failed to achieve compendial requirement for content uniformity despite mixing for 32 minutes. Employing the novel dry powder hybrid mixer device, developed at Aston University laboratory, results revealed the superiority of the device and enabled the production of homogenous blend irrespective of excipient type and particle size. Lower dilutions of the API (1% and 0.5% w/w were examined using non-sieved excipients and the dry powder hybrid mixing device enabled the development of successful blends within compendial requirements and low relative standard deviation.

  14. From inactive to regular jogger

    DEFF Research Database (Denmark)

    Lund-Cramer, Pernille; Brinkmann Løite, Vibeke; Bredahl, Thomas Viskum Gjelstrup

    of Planned Behavior (TPB) and The Transtheoretical Model (TTM). Coding and analysis of interviews were performed using NVivo 10 software. Results TPB: During the behavior change process, the intention to jogging shifted from a focus on weight loss and improved fitness to both physical health, psychological......Title From inactive to regular jogger - a qualitative study of achieved behavioral change among recreational joggers Authors Pernille Lund-Cramer & Vibeke Brinkmann Løite Purpose Despite extensive knowledge of barriers to physical activity, most interventions promoting physical activity have proven...

  15. Social background, bullying, and physical inactivity

    DEFF Research Database (Denmark)

    Henriksen, P W; Rayce, S B; Melkevik, O

    2016-01-01

    More children from lower social backgrounds are physically inactive than those from higher ones. We studied whether bullying was a mediating factor between lower social background and physical inactivity. We also examined the combined effect of low social class and exposure to bullying on physical...... leaves 4.0% in the category physically inactive. The sex and age-adjusted OR (95% CI) for physical inactivity was 2.10 (1.39-3.18) among students with low social class and unclassifiable 3.53 (2.26-5.53). Exposure to bullying was associated with physical inactivity, sex and age-adjusted OR = 2.39 (1.......67-3.41). Exposure to bullying did not explain the association between social class and physical inactivity. The association between social class and physical inactivity was more pronounced among participants also exposed to bullying. In conclusion, there was a significantly increased odds ratio for physical...

  16. Co-Processed Chitin-Mannitol as a New Excipient for Oro-Dispersible Tablets

    OpenAIRE

    Daraghmeh, Nidal; Chowdhry, Babur; Leharne, Stephen; Omari, Mahmoud Al; Badwan, Adnan

    2015-01-01

    This study describes the preparation, characterization and performance of a novel excipient for use in oro-dispersible tablets (ODT). The excipient (Cop?CM) consists of chitin and mannitol. The excipient with optimal physicochemical properties was obtained at a chitin: mannitol ratio of 2:8 (w/w) and produced by roll compaction (RC). Differential scanning calorimetry (DSC), Fourier transform-Infrared (FT-IR), X-ray powder diffraction (XRPD) and scanning electron microscope (SEM) techniques we...

  17. From inactive to regular jogger

    DEFF Research Database (Denmark)

    Lund-Cramer, Pernille; Brinkmann Løite, Vibeke; Bredahl, Thomas Viskum Gjelstrup

    limited in terms of maintaining a behavior change. The purpose of this study was to investigate individual, cognitive, social, and contextual factors influencing the adoption and maintenance of regular self-organized jogging, and how they were manifested among former inactive adults. Methods A qualitative...... to translate intention into regular behavior. TTM: Informants expressed rapid progression from the pre-contemplation to the action stage caused by an early shift in the decisional balance towards advantages overweighing disadvantages. This was followed by a continuous improvement in self-efficacy, which...... jogging-related self-efficacy, and deployment of realistic goal setting was significant in the achievement of regular jogging behavior. Cognitive factors included a positive change in both affective and instrumental beliefs about jogging. Expectations from society and social relations had limited effect...

  18. Penetrometry and estimation of the flow rate of powder excipients.

    Science.gov (United States)

    Zatloukal, Z; Sklubalová, Z

    2007-03-01

    In this work, penetrometry with a sphere was employed to study the flow properties of non-consolidated pharmaceutical powder excipients: sodium chloride, sodium citrate, boric acid, and sorbitol. In order to estimate flow rate, the pressure of penetration in Pascals was used. Penetrometry measurement with a sphere requires modification of the measurement container, in particular by decreasing the diameter of the container, to prevent undesirable movement of material in a direction opposite to that in which the sphere penetrates. Thus penetrometry by a sphere seems to be similar to indentation by the Brinell hardness tester. The pressure of penetration was determined from the depth of penetration by analogy with the Brinell hardness number and an equation for the inter conversion of the two variables is presented. The penetration pressure allowed direct estimation of the flow rate only for those powder excipients with a size fraction in the range of 0.250-0.630 mm. Using the ratio of penetration pressure to bulk density, a polynomial quadratic equation was generated from which the flow rates for the group of all tested powders could be estimated. Finally, if the inverse ratio of bulk density and penetration pressure was used as an independent variable, the flow rate could be estimated by linear regression with the coefficient of determination r2 = 0.9941. In conclusion, using sphere penetrometry, the flow properties of non-consolidated powder samples could be investigated by indentation. As a result, a linear regression in which the flow rate was directly proportional to the powder bulk density and inversely proportional to the penetration pressure could be best recommended for the estimation of the flow rate of powder excipients.

  19. Extraction and characterization of artocarpus integer gum as pharmaceutical excipient.

    Science.gov (United States)

    Farooq, Uzma; Malviya, Rishabha; Sharma, Pramod Kumar

    2014-01-01

    Natural polymers are widely used as excipients in pharmaceutical formulations. They are easily available, cheap and less toxic as compared to synthetic polymers. This study involves the extraction and characterization of kathal (Artocarpus integer) gum as a pharmaceutical excipient. Water was used as a solvent for extraction of the natural polymer. Yield was calculated with an aim to evaluate the efficacy of the process. The product was screened for the presence of Micrometric properties, and swelling index, flow behavior, surface tension, and viscosity of natural polymers were calculated. Using a water based extraction method, the yield of gum was found to be 2.85%. Various parameters such as flow behavior, organoleptic properties, surface tension, viscosity, loss on drying, ash value and swelling index together with microscopic studies of particles were done to characterize the extracted gum. The result showed that extracted kathal gum exhibited excellent flow properties. The gum was investigated for purity by carrying out chemical tests for different phytochemical constituents and only carbohydrates were found to be present. It had a good swelling index (13 ± 1). The pH and surface tension of the 1% gum solution were found to be 6 ± 0.5 and 0.0627 J/m2, respectively. The ash values such as total ash, acid insoluble ash, and water soluble ash were found to be 18.9%, 0.67% and 4% respectively. Loss on drying was 6.61%. The extracted gum was soluble in warm water and insoluble in organic solvents. The scanning electron micrograph (SEM) revealed rough and irregular particles of the isolated polymer. The results of the evaluated properties showed that kathal-derived gum has acceptable pH and organoleptic properties and can be used as a pharmaceutical excipient to formulate solid oral dosage forms.

  20. Vascular adaption to physical inactivity in humans

    OpenAIRE

    Bleeker, M.W.P.

    2006-01-01

    This thesis presents studies on vascular adaptation to physical inactivity and deconditioning. Although it is clear that physical inactivity is an important risk factor for cardiovascular disease, the underlying physiological mechanisms have not yet been elucidated. In contrast to physical inactivity, exercise decreases the risk for cardiovascular disease. This beneficial effect of exercise is partly due to changes in vascular function and structure. However, far less is known about vascular ...

  1. Computational prediction of drug solubility in lipid based formulation excipients.

    Science.gov (United States)

    Persson, Linda C; Porter, Christopher J H; Charman, William N; Bergström, Christel A S

    2013-12-01

    To investigate if drug solubility in pharmaceutical excipients used in lipid based formulations (LBFs) can be predicted from physicochemical properties. Solubility was measured for 30 structurally diverse drug molecules in soybean oil (SBO, long-chain triglyceride; TGLC), Captex355 (medium-chain triglyceride; TGMC), polysorbate 80 (PS80; surfactant) and PEG400 co-solvent and used as responses during PLS model development. Melting point and calculated molecular descriptors were used as variables and the PLS models were validated with test sets and permutation tests. Solvation capacity of SBO and Captex355 was equal on a mol per mol scale (R (2) = 0.98). A strong correlation was also found between PS80 and PEG400 (R (2) = 0.85), identifying the significant contribution of the ethoxylation for the solvation capacity of PS80. In silico models based on calculated descriptors were successfully developed for drug solubility in SBO (R (2) = 0.81, Q (2) = 0.76) and Captex355 (R (2) = 0.84, Q (2) = 0.80). However, solubility in PS80 and PEG400 were not possible to quantitatively predict from molecular structure. Solubility measured in one excipient can be used to predict solubility in another, herein exemplified with TGMC versus TGLC, and PS80 versus PEG400. We also show, for the first time, that solubility in TGMC and TGLC can be predicted from rapidly calculated molecular descriptors.

  2. Immediate-type hypersensitivity reaction to Mannitol as drug excipient (E421): a case report.

    Science.gov (United States)

    Calogiuri, G F; Muratore, L; Nettis, E; Casto, A M; Di Leo, E; Vacca, A

    2015-05-01

    Allergic reactions to mannitol have been reported rarely, despite its widespread use as a drug and as a food excipient. This is the first case report in which oral mannitol induces an immediate type hypersensitivity as a drug excipient, in a 42 year old man affected by rhinitis to olive tree pollen. Unusual and undervalued risk factors for mannitol hypersensitivity are examined.

  3. Cellulose nanofibers as excipient for the delivery of poorly soluble drugs

    DEFF Research Database (Denmark)

    Löbmann, Korbinian; Svagan, Anna J

    2017-01-01

    the use of new excipients. Cellulose nanofibers (CNFs) is such an excipient and it has only recently been described in the pharmaceutical field. In this review, the use of CNF in drug formulation with a focus on poorly soluble drugs is featured. In particular, the aim is to describe and discuss the many...

  4. Barren diets increase wakeful inactivity in calves

    NARCIS (Netherlands)

    Webb, Laura E.; Engel, Bas; Reenen, van Kees; Bokkers, Eddie A.M.

    2017-01-01

    Inactivity is a vastly understudied behavioural category, which may reflect positive or negative affective states in captive or domesticated animals. Increased inactivity in barren-housed animals, in combination with an increased or decreased interest in stimuli, e.g. novel objects, can indicate

  5. Administrative Inactivity: Concept and Requirements of Legality

    Directory of Open Access Journals (Sweden)

    Sergey V. Yarkovoy

    2016-07-01

    Full Text Available The general concept of omission in law, as well as the concept and main features of inactivity on the part of executive bodies, other public administration agencies and their officials in their administrative law enforcement are examined, conditions of legality of such inactivity are under study

  6. Medicinal plants used as excipients in the history in Ghanaian herbal medicine

    DEFF Research Database (Denmark)

    Freiesleben, Sara Holm; Soelberg, Jens; Jäger, Anna

    2015-01-01

    Ethnopharmacological relevance The present study was carried out to investigate the traditional use, pharmacology and active compounds of four plants commonly used as excipients in herbal medicine in Ghana. Materials and methods A comprehensive literature search was conducted to gain knowledge....... melegueta could act as an antioxidant to preserve herbal preparations. None of the plant excipients had antibacterial activity against the bacteria tested in this study. Compounds with an aromatic or pungent smell had been identified in all the plant excipients. An explanation for the use of the plants...... as excipients could rely on their taste properties. Conclusion The present study suggests that there may be more than one simple explanation for the use of these four plants as excipients. Plausible explanations have been proven to be: (1) a way to increase the effect of the medicine, (2) a way to make...

  7. Use of Natural Gums and Mucilages as Pharmaceutical Excipients.

    Science.gov (United States)

    Hamman, Hannlie; Steenekamp, Jan; Hamman, Josias

    2015-01-01

    Polysaccharide rich gums and mucilages are produced by different natural sources such as plants, animals and microbial organisms to fulfil structural and physiological functions. Their diverse structural compositions with a broad range of physicochemical properties make them useful for inclusion in dosage forms for different purposes such as to improve manufacturing processes and/or to facilitate drug delivery. A number of natural gums and mucilages have been investigated for inclusion in pharmaceutical formulations for a variety of reasons. The search for new excipients continues to be an active topic in dosage form design and drug delivery research. The aim of this review article is to give an overview of the chemical nature of natural gums and mucilages and to discuss their applications in the formulation of pharmaceutical dosage forms. Special emphasis will be placed on the use of gums and mucilages in novel drug delivery systems, such as modified release dosage forms and delivery systems that target specific sites of delivery.

  8. Performance of Deacetyled Glucomannan as Iron Encapsulation Excipient

    Directory of Open Access Journals (Sweden)

    Wardhani Dyah H.

    2018-01-01

    Full Text Available Encapsulation protects iron from degradation or oxidation possibilities due to its encapsulation material. Glucomannan (GM is a neutral polysaccharide consist of D-mannose and D-glucose connected with β-1,4 linkage. Deactylation transforms solubility of glucomannan as well as its gel structure. These properties support for excipient application. The aim of this work was to determine performance of deacetylated glucomannan as iron matrix. Deacetylation was conducted heterogeneously. Deacetylation did not change the backbone of GM. Higher alkali concentration has better ability to encapsulate iron. Extended deacetylation time and alkali concentration affect insignificantly on the performance of encapsulation to protect iron from oxidation. The release of iron from the matrix influences by deacetylation degree.

  9. Skin-Applied Repellent Ingredients

    Science.gov (United States)

    Active ingredients in EPA-registered insect repellents include catnip oil, oil of citronella, DEET, IR 3535, picaridin, oil of lemon eucalyptus, and 2-undecanone. Find fact sheets and pesticide regulatory information.

  10. INGREDIENT BRANDING - A GROWTH OPPORTUNITY?

    Directory of Open Access Journals (Sweden)

    Anca BUTNARIU

    2017-05-01

    Full Text Available Co-branding is an increasingly used strategy, consisting of marketing products representing two brands or more. Ingredient branding fits in the scope of co-branding, consisting of the inclusion of key attributes of one brand into another brand as ingredients. Ingredient branding is one of the many brand strategies used in marketing to provide differentiation criteria for the customers. In recent years, its importance and incidence have dramatically increased Extant research provides disparate and limited understanding of contexts in which such contracts pay off. Our paper provides an extensive review of literature and research streams in ingredient branding, adding knowledge to theory and help for companies that need to establish and maintain a competitive advantage, by differentiating their offer on the markets they act on, in a globalized economy.

  11. Autonomic responses to exercise: deconditioning/inactivity.

    Science.gov (United States)

    Hughson, Richard L; Shoemaker, J Kevin

    2015-03-01

    Experimental models of physical inactivity associated with a sedentary lifestyle or extreme forms of inactivity with bed rest or spaceflight affect the balance between parasympathetic and sympathetic nervous system regulation of the cardiovascular system. Deconditioning effects are rapidly seen in the regulation of heart rate to compensate for physical modifications in blood volume and cardiac function. Reflex regulation of cardiovascular control during exercise by metaboreflex and baroreflex is altered by bed rest and spaceflight. These models of extreme inactivity provide a reference to guide physical activity requirements for optimal cardiovascular health. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. A high throughput platform for understanding the influence of excipients on physical and chemical stability

    DEFF Research Database (Denmark)

    Raijada, Dhara; Cornett, Claus; Rantanen, Jukka

    2013-01-01

    selected. Binary physical mixtures of drug and excipient were transferred to a 96-well plate followed by addition of water to simulate aqueous granulation environment. The plate was subjected for XRPD measurements followed by drying and subsequent XRPD and HPLC measurements of the dried samples. Excipients...... for chemical degradation. The proposed high-throughput platform can be used during early drug development to simulate typical processing induced stress in a small scale and to understand possible phase transformation behaviour and influence of excipients on this....

  13. Miniaturized approach for excipient selection during the development of oral solid dosage form

    DEFF Research Database (Denmark)

    Raijada, Dharaben Kaushikkumar; Müllertz, Anette; Cornett, Claus

    2014-01-01

    by sieving, drying, and compaction of the agglomerated material. The mini-compacts were subjected to stability studies at 25°C/5% relative humidity (RH), 25°C/60% RH and 40°C/75% RH for 3 months. The physical stability of the drug was affected by the storage condition and by the characteristics...... of the excipients, whereas all the samples were chemically stable. Force-distance curves obtained during the compression of agglomerated material were used for the comparison of compressibility of different drug-excipient mixtures. The agglomerated drug-excipient mixtures were also subjected to studies...

  14. Electron spin resonance--thermoluminescence studies on irradiated drugs and excipients

    International Nuclear Information System (INIS)

    Raffi, J.; Gelly, S.; Piccerelle, P.; Prinderre, P.; Chamayou, A.; Baron, M.

    2002-01-01

    The methods (ESR, TL, GPC) developed to prove whether or not a foodstuff has been irradiated can be used to get the same proof in case of an irradiation treatment of drugs, excipients and cosmetic products

  15. Safe excipient exposure in neonates and small children - protocol for the SEEN project

    DEFF Research Database (Denmark)

    Valeur, Kristine Svinning; Hertel, Steen Axel; Lundstrøm, Kaare Engell

    2017-01-01

    INTRODUCTION: The pharmacokinetics of excipients in neonates differs from that of older children. In a recent pan--European survey, two thirds of neonates received at least one potentially harmful excipient, such as ethanol and benzoates. The content of sweeteners varied by route of administration...... (more common by enteral than parenteral route), and regional differences were revealed. The survey did not identify if the content of excipients was more pronounced in medications prescribed for specific medical diseases, e.g. more common in cardiovascular conditions than lung diseases. Furthermore......, the quantitative amount of e.g. ethanol in the multi-medicated neonate has not been investigated. The aim of the present study was to quantify the total amount of excipients administered to poly-medicated neonatal and paediatric patients during hospitalisation; and to investigate if any particular medical diseases...

  16. Safe excipient exposure in neonates and small children - protocol for the SEEN project

    DEFF Research Database (Denmark)

    Valeur, Kristine Svinning; Hertel, Steen Axel; Lundstrøm, Kaare Engell

    2017-01-01

    INTRODUCTION: The pharmacokinetics of excipients in neonates differs from that of older children. In a recent pan--European survey, two thirds of neonates received at least one potentially harmful excipient, such as ethanol and benzoates. The content of sweeteners varied by route of administration...... are treated with potentially harmful excipients. METHODS: This is a retrospective cohort study based on chart-audit on multi-medicated patients ≤ 5 years of age treated at the Rigshospitalet, Denmark. Preparations with ethanol, propylene glycol, benzyl alcohol, parabens, acesulfame p, aspartame, glycerol...... (more common by enteral than parenteral route), and regional differences were revealed. The survey did not identify if the content of excipients was more pronounced in medications prescribed for specific medical diseases, e.g. more common in cardiovascular conditions than lung diseases. Furthermore...

  17. Disproportionation of the calcium salt of atorvastatin in the presence of acidic excipients.

    Science.gov (United States)

    Christensen, Niels Peter Aae; Rantanen, Jukka; Cornett, Claus; Taylor, Lynne S

    2012-10-01

    The aim of the present study was to combine vibrational spectroscopy and chemometrics for investigating excipient-induced disproportionation of the calcium salt of atorvastatin into the corresponding free acid form in environments relevant to manufacturing and storage of solid dosage formulations. Of the excipients investigated, citric acid and polyacrylic acid were found to induce disproportionation. Moreover, it was also observed that exposure to high relative humidity, elevated temperatures, and milling all promoted disproportionation. The results suggest that disproportionation of drug salts in powders happens via a solution-mediated mechanism and that the choice of excipient has a considerable impact on the extent of disproportionation observed. Thus, careful attention must be paid to excipient selection during pharmaceutical development and exposure to stresses such as high humidity and mechanical activation should be minimized. Copyright © 2012 Elsevier B.V. All rights reserved.

  18. Recently Investigated Natural Gums and Mucilages as Pharmaceutical Excipients: An Overview

    OpenAIRE

    Choudhary, Pritam Dinesh; Pawar, Harshal Ashok

    2014-01-01

    Due to advances in drug delivery technology, currently, excipients are included in novel dosage forms to fulfil specific functions and in some cases they directly or indirectly influence the extent and/or rate of drug release and drug absorption. Recent trends towards use of plant based and natural products demand the replacement of synthetic additives with natural ones. Today, the whole world is increasingly interested in natural drugs and excipients. These natural materials have many advant...

  19. Novel nano-cellulose excipient for generating non-Newtonian droplets for targeted nasal drug delivery.

    Science.gov (United States)

    Young, Paul M; Traini, Daniela; Ong, Hui Xin; Granieri, Angelo; Zhu, Bing; Scalia, Santo; Song, Jie; Spicer, Patrick T

    2017-10-01

    Thickening polymers have been used as excipients in nasal formulations to avoid nasal run-off (nasal drip) post-administration. However, increasing the viscosity of the formulation can have a negative impact on the quality of the aerosols generated. Therefore, the study aims to investigate the use of a novel smart nano-cellulose excipient to generate suitable droplets for nasal drug delivery that simultaneously has only marginally increased viscosity while still reducing nasal drips. Nasal sprays containing nano-cellulose at different concentrations were investigated for the additive's potential as an excipient. The formulations were characterized for their rheological and aerosol properties. This was then compared to conventional nasal spray formulation containing the single-component hydroxyl-propyl methyl cellulose (HPMC) viscosity enhancing excipient. The HPMC-containing nasal formulations behave in a Newtonian manner while the nano-cellulose formulations have a yield stress and shear-thinning properties. At higher excipient concentrations and shear rates, the nano-cellulose solutions have significantly lower viscosities compared to the HPMC solution, resulting in improved droplet formation when actuated through conventional nasal spray. Nano-cellulose materials could potentially be used as a suitable excipient for nasal drug delivery, producing consistent aerosol droplet size, and enhanced residence time within the nasal cavity with reduced run-offs compared to conventional polymer thickeners.

  20. Novel coprocessed excipients composed of lactose, HPMC, and PVPP for tableting and its application.

    Science.gov (United States)

    Wang, SongTao; Li, JinZhi; Lin, Xiao; Feng, Yi; Kou, Xiang; Babu, Sreehari; Panicucci, Riccardo

    2015-01-01

    New coprocessed excipients composed of α-lactose monohydrate (a filler), HPMC E3 (a binder), and PVPP (a superdisintegrant) were developed by spray drying in this study to improve the tableting properties of lactose. Factors affecting the properties of the coprocessed excipients were investigated by a 3 × 3 × 2 factorial design. These factors include lactose grade (90 M, 200 M, and 450 M), percentage of HPMC (3.5%, 7.0%, and 10.5%), and percentage of PVPP (0% and 3.5%). The results show that the compactability of the excipients could be significantly improved by increasing either the percentage of HPMC or the primary particle size of lactose. The addition of 3.5% PVPP had little effect on the compactability, but significantly improved the disintegration ability. The developed coprocessed excipients have much lower yield pressures and much higher working efficiency during tableting compared to the main raw material (α-lactose monohydrate). These improvements are mainly attributed to the addition of HPMC and the proximately 30% amorphous lactose formed during process. Both HPMC and amorphous lactose were homogeneously distributed on the surface of the secondary particles, maximizing their effect. Furthermore, the low hygroscopicity and high glass transition temperature of HPMC led to a high yield. The drug loading capacity of the newly coprocessed excipients is also excellent. In summary, the tri-component coprocessed excipients investigated are promising and worthy of further development. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Medicinal plants used as excipients in the history in Ghanaian herbal medicine.

    Science.gov (United States)

    Freiesleben, Sara Holm; Soelberg, Jens; Jäger, Anna K

    2015-11-04

    The present study was carried out to investigate the traditional use, pharmacology and active compounds of four plants commonly used as excipients in herbal medicine in Ghana. A comprehensive literature search was conducted to gain knowledge about the traditional use, pharmacology and active compounds of the four plant excipients. The broth dilution antibacterial assay and the DPPH radical scavenging antioxidant assay were used to evaluate the antibacterial and antioxidant activity of the plants, respectively. Ethanol, warm water and cold water extracts were prepared from the dried seeds/fruits of Aframomum melegueta, Piper guineense, Xylopia aethiopica and Monodora myristica, and tested in the assays. A. melegueta and P. guineense seemed to act as pharmacoenhancers, since they have been shown to inhibit specific CYP-enzymes. A. melegueta could act as an antioxidant to preserve herbal preparations. None of the plant excipients had antibacterial activity against the bacteria tested in this study. Compounds with an aromatic or pungent smell had been identified in all the plant excipients. An explanation for the use of the plants as excipients could rely on their taste properties. The present study suggests that there may be more than one simple explanation for the use of these four plants as excipients. Plausible explanations have been proven to be: (1) a way to increase the effect of the medicine, (2) a way to make the medicine more palatable or (3) a way to preserve the activity of the medicinal preparation over time. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  2. Approaches to new derivatives of cellulose as designed pharmaceutical excipients

    Directory of Open Access Journals (Sweden)

    Schwarz Brigitte

    2003-01-01

    Full Text Available Recently, our group initiated a synthetic program directed at new derivatives of cellulose intended as novel pharmaceutical excipients. With several notable exceptions, the attempted regioselective introduction of chemical functionality into natural cellulose by direct chemical modification will result in heterogeneous products that are difficult to characterize and the preparation of which is insufficiently reproduceable. Approaches to the chemical polymerization of appropriate glucose monomers are available, leading to a degree of polymerization in the order of 100. However, the nature of these processes does not readily lend itself to the preparation of products comprising regularly arranged protecting groups in defined positions. We have chosen a mixed organic chemical-enzyme catalyzed approach based on a procedure of Kobayashi, Shoda, Donnelly and Church. Fluoride derivatives of cellobiose may be polymerized, under catalysis by cellobiose hydrolase, to form cellulose oligosaccharides of different chain lengths. We describe the chemical syntheses of cellobiose fluoride derivatives comprising protecting groups in defined positions of the reducing or nonreducing glucose moieties of cellobiose. Such derivatives may be polymerized to afford cellulose derivatives with protecting groups on alternate glucose units. The processing of these protected cellulose derivatives to afford novel biomimetic polymers will be described.

  3. Cyclodextrins as functional excipients: methods to enhance complexation efficiency.

    Science.gov (United States)

    Loftsson, Thorsteinn; Brewster, Marcus E

    2012-09-01

    Cyclodextrins have gained currency as useful solubilizing excipients with an ever increasing list of beneficial properties and functionalities. Although their use in liquid dosage forms including oral and parenteral solutions is straightforward, their application to solids can be confounded by the added bulk that is contributed to the formulation. This factor has limited the use of cyclodextrin in tablets and relates systems mainly to potent drug substances. Increasing the ability of cyclodextrins to complex with drug through a manipulation of their complexation efficiency (CE) may expand the use of these materials to the increasing list of drug candidates and marketed drugs who may benefit from this technology. This brief review assesses tools and materials that have been suggested for increasing the CE for pharmaceutically useful cyclodextrins and drugs. The relative importance of impacting the drug solubility (S(0) ) and phase-solubility isotherm slope is discussed in the context of drug ionization and salt use; the impact of polymers, charge interactions, and charge shielding; and the coincidental formation of other complex types in the media. The influence of drug form as well as supersaturation is also discussed in the context of the responsible mechanisms along with aggregation, inclusion, and noninclusion complex formation. Copyright © 2012 Wiley Periodicals, Inc.

  4. Spray-dried cellulose nanofibers as novel tablet excipient.

    Science.gov (United States)

    Kolakovic, Ruzica; Peltonen, Leena; Laaksonen, Timo; Putkisto, Kaisa; Laukkanen, Antti; Hirvonen, Jouni

    2011-12-01

    The purpose of this study was to evaluate the potential of cellulose nanofibers (also referred as microfibrillated cellulose, nanocellulose, nanofibrillated, or nanofibrillar cellulose) as novel tabletting material. For this purpose, physical and mechanical properties of spray-dried cellulose nanofibers (CNF) were examined, and results were compared to those of two commercial grades of microcrystalline cellulose (MCC), Avicel PH101 and Avicel PH102, which are the most commonly and widely used direct compression excipients. Chemically, MCC and CNF are almost identical, but their physical characteristics, like mechanical properties and surface-to-volume ratio, differ remarkably. The novel material was characterized with respect to bulk and tapped as well as true density, moisture content, and flow properties. Tablets made of CNF powder and its mixtures with MCC with or without paracetamol as model compound were produced by direct compression and after wet granulation. The tensile strength of the tablets made in a series of applied pressures was determined, and yield pressure values were calculated from the measurements. With CNF, both wet granulation and direct compression were successful. During tablet compression, CNF particles were less prone to permanent deformation and had less pronounced ductile characteristics. Disintegration and dissolution studies showed slightly faster drug release from direct compression tablets with CNF, while wet granulated systems did not have any significant difference.

  5. Effect of milling on DSC thermogram of excipient adipic acid.

    Science.gov (United States)

    Ng, Wai Kiong; Kwek, Jin Wang; Yuen, Aaron; Tan, Chin Lee; Tan, Reginald

    2010-03-01

    The purpose of this research was to investigate why and how mechanical milling results in an unexpected shift in differential scanning calorimetry (DSC) measured fusion enthalpy (Delta(fus)H) and melting point (T(m)) of adipic acid, a pharmaceutical excipient. Hyper differential scanning calorimetry (hyper-DSC) was used to characterize adipic acid before and after ball-milling. An experimental study was conducted to evaluate previous postulations such as electrostatic charging using the Faraday cage method, crystallinity loss using powder X-ray diffraction (PXRD), thermal annealing using DSC, impurities removal using thermal gravimetric analysis (TGA) and Karl Fischer titration. DSC thermograms showed that after milling, the values of Delta(fus)H and T(m) were increased by approximately 9% and 5 K, respectively. Previous suggestions of increased electrostatic attraction, change in particle size distribution, and thermal annealing during measurements did not explain the differences. Instead, theoretical analysis and experimental findings suggested that the residual solvent (water) plays a key role. Water entrapped as inclusions inside adipic acid during solution crystallization was partially evaporated by localized heating at the cleaved surfaces during milling. The correlation between the removal of water and melting properties measured was shown via drying and crystallization experiments. These findings show that milling can reduce residual solvent content and causes a shift in DSC results.

  6. Hydroxypropyl Methylcellulose Acetate Succinate: Potential Drug–Excipient Incompatibility

    OpenAIRE

    Dong, Zedong; Choi, Duk Soon

    2008-01-01

    The stability of hydroxypropyl methylcellulose acetate succinate (HPMC-AS) and its potential incompatibility with active pharmaceutical ingredients (API) carrying hydroxyl group(s) were investigated in this research. HPMC-AS may undergo hydrolysis under harsh processing conditions with the generation of succinic acid and acetic acid, which can form ester bond(s) with the hydroxyl group(s) in API. In this case, the hot-melt extrusion (HME) product prepared from HPMC-AS and our model compound (...

  7. Encapsulation of new active ingredients

    Science.gov (United States)

    The organic construct consumed as food comes packaged in units that carry the active components, protects the entrapped active materials until delivered to targeted human organ. The packaging and delivery role is mimicked in the microencapsulation tools used to deliver active ingredients in process...

  8. Development and Characterization of Multifunctional Directly Compressible Co-processed Excipient by Spray Drying Method.

    Science.gov (United States)

    Chauhan, Sohil I; Nathwani, Sandeep V; Soniwala, Moinuddin M; Chavda, Jayant R

    2017-05-01

    The present investigation was carried out to develop and characterize a multifunctional co-processed excipient for improving the compressibility of poorly compressible drugs. Etodolac was used as a model drug. Microcrystalline cellulose (MCC), lactose monohydrate (lactose), and StarCap 1500 (StarCap) were selected as components of the co-processed excipient. The spray drying method was used for co-processing of excipients. D-optimal mixture design was applied to optimize the proportion of component excipients. Statistical analysis of the D-optimal mixture design revealed that all response variables were significantly affected by the independent variables (p value < 0.05). Optimized composition was obtained from the desirability function. The optimized composition of the co-processed excipient was found to be 30% MCC, 25% lactose, and 45% StarCap. This optimized batch was evaluated for flow properties, compressibility parameters such as Kawakita's and Kuno's equation and Heckel's equation, and dilution potential. Evaluation parameters for flow properties (angle of repose, Carr's index, and Hausner's ratio) suggested excellent flow character. The parameters of Kawakita's and Kuno's equation and Heckel's equation suggested improvement in the compressibility of the model drug. Dilution potential was found to be 40%, and based on that, tablets of the model drug were formulated and evaluated for general evaluation parameters of tablets. All the parameters were found to be within the acceptance criteria which concluded that the multifunctional directly compressible co-processed excipient was prepared successfully that improved the compressibility of the poorly compressible model drug etodolac along with spray drying as an efficient method for the preparation of co-processed excipient.

  9. 24 CFR 214.200 - Inactive status.

    Science.gov (United States)

    2010-04-01

    ... review. (b) Agencies that seek temporary inactive status must submit a request to HUD in writing... review and notify the agency of approval or rejection, in writing. If approved, the agency's name and contact information will be temporarily removed from the HUD-approved Web list of agencies and the...

  10. Effects of active, inactive and compounded Saccharomyces ...

    African Journals Online (AJOL)

    The objective of this research was to determine the effects of active, inactive and compounded Saccharomyces cerevisiae (SC) as natural feed additives on growth performance, visceral organs weight, insulin, thyroxin and growth hormone of Japanese quails. One day old Japanese quails allocated in 4 treatments by 4 ...

  11. Elective Mutism Associated with Selective Inactivity.

    Science.gov (United States)

    Hill, Linda; Scull, John

    1985-01-01

    Effective treatment procedures for a nine-year-old boy with elective mutism and selective inactivity included increasing the frequency of situations in which he could already speak and decreasing the frequency of those in which he seldom spoke (specifically coercive situations). (CL)

  12. The relationship between the particle properties, mechanical behavior, and surface roughness of some pharmaceutical excipient compacts

    International Nuclear Information System (INIS)

    Narayan, Padma; Hancock, Bruno C.

    2003-01-01

    Several common pharmaceutical excipient powders were compacted at a constant solid fraction (SF) in order to study the relationship between powder properties, compact surface roughness, and compact mechanical properties such as hardness, elasticity, and brittleness. The materials used in this study included microcrystalline cellulose (MCC), fumaric acid, mannitol, lactose monohydrate, spray dried lactose, sucrose, and dibasic calcium phosphate dihydrate. A slow consolidation process was used to make compacts at a SF of 0.85 (typical for most pharmaceutical tablets) from single excipient components. A model was proposed to describe the surface roughness of compacts based on the brittle or ductile deformation tendencies of the powder materials. The roughness profile would also be dependent upon the magnitude of the compression stress in relation to the yield stress (onset of irreversible deformation) values of the excipients. It was hypothesized that brittle materials would produce smooth compacts with high surface variability due to particle fracture, and the converse would apply for ductile materials. Compact surfaces should be smoother if the materials were compressed above their yield pressure values. Non-contact optical profilometry was used along with scanning electron microscopy to quantify and characterize the surface morphology of the excipient compacts. The roughness parameters R a (average roughness), R q (RMS roughness), R q /R a (ratio describing surface variability), and R sk (skewness) were found to correlate with the deformation properties of the excipients. Brittle materials such as lactose, sucrose, and calcium phosphate produced compacts with low values of R a and R q , high variability, and negative R sk . The opposite was found with plastic materials such as MCC, mannitol, and fumaric acid. The highly negative skewness values for brittle material compacts may indicate their propensity to be vulnerable to cracks or surface defects. These findings

  13. Applications of Polymers as Pharmaceutical Excipients in Solid Oral Dosage Forms.

    Science.gov (United States)

    Debotton, Nir; Dahan, Arik

    2017-01-01

    Over the last few decades, polymers have been extensively used as pharmaceutical excipients in drug delivery systems. Pharmaceutical polymers evolved from being simply used as gelatin shells comprising capsule to offering great formulation advantages including enabling controlled/slow release and specific targeting of drugs to the site(s) of action (the "magic bullets" concept), hence hold a significant clinical promise. Oral administration of solid dosage forms (e.g., tablets and capsules) is the most common and convenient route of drug administration. When formulating challenging molecules into solid oral dosage forms, polymeric pharmaceutical excipients permit masking undesired physicochemical properties of drugs and consequently, altering their pharmacokinetic profiles to improve the therapeutic effect. As a result, the number of synthetic and natural polymers available commercially as pharmaceutical excipients has increased dramatically, offering potential solutions to various difficulties. For instance, the different polymers may allow increased solubility, swellability, viscosity, biodegradability, advanced coatings, pH dependency, mucodhesion, and inhibition of crystallization. The aim of this article is to provide a wide angle prospect of the different uses of pharmaceutical polymers in solid oral dosage forms. The various types of polymeric excipients are presented, and their distinctive role in oral drug delivery is emphasized. The comprehensive know-how provided in this article may allow scientists to use these polymeric excipients rationally, to fully exploit their different features and potential influence on drug delivery, with the overall aim of making better drug products. © 2016 Wiley Periodicals, Inc.

  14. Towards integrated drug substance and drug product design for an active pharmaceutical ingredient using particle engineering.

    Science.gov (United States)

    Kougoulos, Eleftherios; Smales, Ian; Verrier, Hugh M

    2011-03-01

    A novel experimental approach describing the integration of drug substance and drug production design using particle engineering techniques such as sonocrystallization, high shear wet milling (HSWM) and dry impact (hammer) milling were used to manufacture samples of an active pharmaceutical ingredient (API) with diverse particle size and size distributions. The API instability was addressed using particle engineering and through judicious selection of excipients to reduce degradation reactions. API produced using a conventional batch cooling crystallization process resulted in content uniformity issues. Hammer milling increased fine particle formation resulting in reduced content uniformity and increased degradation compared to sonocrystallized and HSWM API in the formulation. To ensure at least a 2-year shelf life based on predictions using an Accelerated Stability Assessment Program, this API should have a D [v, 0.1] of 55 μm and a D [v, 0.5] of 140 μm. The particle size of the chief excipient in the drug product formulation needed to be close to that of the API to avoid content uniformity and stability issues but large enough to reduce lactam formation. The novel methodology described here has potential for application to other APIs. © 2011 American Association of Pharmaceutical Scientists

  15. 21 CFR 701.30 - Ingredient names established for cosmetic ingredient labeling.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Ingredient names established for cosmetic... AND HUMAN SERVICES (CONTINUED) COSMETICS COSMETIC LABELING Labeling of Specific Ingredients § 701.30 Ingredient names established for cosmetic ingredient labeling. The Commissioner establishes the following...

  16. On the role of API in determining porosity, pore structure and bulk modulus of the skeletal material in pharmaceutical tablets formed with MCC as sole excipient.

    Science.gov (United States)

    Ridgway, Cathy; Bawuah, Prince; Markl, Daniel; Zeitler, J Axel; Ketolainen, Jarkko; Peiponen, Kai-Erik; Gane, Patrick

    2017-06-30

    The physical properties and mechanical integrity of pharmaceutical tablets are of major importance when loading with active pharmaceutical ingredient(s) (API) in order to ensure ease of processing, control of dosage and stability during transportation and handling prior to patient consumption. The interaction between API and excipient, acting as functional extender and binder, however, is little understood in this context. The API indomethacin is combined in this study with microcrystalline cellulose (MCC) at increasing loading levels. Tablets from the defined API/MCC ratios are made under conditions of controlled porosity and tablet thickness, resulting from different compression conditions, and thus compaction levels. Mercury intrusion porosimetry is used to establish the accessible pore volume, pore size distribution and, adopting the observed region of elastic intrusion-extrusion at high pressure, an elastic bulk modulus of the skeletal material is recorded. Porosity values are compared to previously published values derived from terahertz (THz) refractive index data obtained from exactly the same tablet sample sets. It is shown that the elastic bulk modulus is dependent on API wt% loading under constant tablet preparation conditions delivering equal dimensions and porosity. The findings are considered of novel value in respect to establishing consistency of tablet production and optimisation of physical properties. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. EPR response characterization of drugs excipients for applying in accident dosimetry

    International Nuclear Information System (INIS)

    Marczewski, Barbara S.; Rodrigues Junior, Orlando; Galante, Ocimar L.; Costa, Zelia M. da; Campos, Leticia L.

    2002-01-01

    Some drugs are widely used by the population and can be employed to dose retrospective. The carbohydrates (saccharides), commonly used as excipients in the pharmaceutical industry, produce a quantity of free radicals after gamma irradiation, making them useful for dosimetry in emergency or accident situations that imply in dose evaluation from the materials found nearly or in contact with victims. In general, EPR signal from pulverized pills of some drugs are very complex due to the variety of components in the formulation. Because of this fact, some pharmaceutical excipients identified in the pill composition were also analysed by EPR spectrometry. On the counter drugs were studied: Cebion glucose, AAS, Aspirina, Conmel, Lacto-Purga and sugar substitutive ZeroCal. The excipients were: lactose, amide, anhydrous glucose and magnesium stearate. In some samples the number of radicals produced increased with the dose, showing a linear response for a dose range of interest and an adequate sensibility for dosimetry in accident cases

  18. Recently Investigated Natural Gums and Mucilages as Pharmaceutical Excipients: An Overview

    Science.gov (United States)

    Choudhary, Pritam Dinesh; Pawar, Harshal Ashok

    2014-01-01

    Due to advances in drug delivery technology, currently, excipients are included in novel dosage forms to fulfil specific functions and in some cases they directly or indirectly influence the extent and/or rate of drug release and drug absorption. Recent trends towards use of plant based and natural products demand the replacement of synthetic additives with natural ones. Today, the whole world is increasingly interested in natural drugs and excipients. These natural materials have many advantages over synthetic ones as they are chemically inert, nontoxic, less expensive, biodegradable, and widely available. This review discusses majority of the plant-derived polymeric compounds (gums and mucilage's), their sources, chemical constituents, uses, and some recent investigations as excipients in novel drug delivery systems. PMID:26556189

  19. IDENTIFICATION OF PHARMACEUTICAL EXCIPIENT BEHAVIOR OF CHICKPEA (CICER ARIETINUM) STARCH IN GLICLAZIDE IMMEDIATE RELEASE TABLETS.

    Science.gov (United States)

    Meka, Venkata Srikanth; Yee, Phung; Sheshala, Ravi

    2016-01-01

    In the past few years, there are number of researchers carrying out their research on the excipients derived from polysaccharides and some of these researches show that natural excipients are comparable and can serve as an alternative to the synthetic excipients. Hence, the objectives of this research are to characterize the naturally sourced chickpea starch powder and to study the pharmaceutical excipient behavior of chickpea starch in gliclazide immediate release (IR) tablets. In this research, the binding properties of chickpea starch were compared to that of povidone, whereas the disintegrant properties of chickpea starch were compared to those of crospovidone, croscarmellose sodium and sodium starch glycolate. Flow property of chickpea starch was assessed with the measurement of bulk density, tapped density, compressibility index and angle of repose. Calibration curve for gliclazide in phosphate buffer pH 7.4 was developed. Gliclazide IR tablets were then produced with direct compression method. Physicochemical characteristics of the tablets, including thickness, tablet weight uniformity, hardness, disintegration time and friability were evaluated. Then, in vitro dissolution studies were performed by following United States Pharmacopeia (USP) dissolution method. The dissolution results were analyzed and compared with t30, t50, dissolution efficiency (DE). Lastly, drug-excipient compatibility studies, including Fourier transform infrared (FTIR) spectroscopic analysis and differential scanning calorimetric (DSC) analysis were carried out. Fair flow property was observed in the chickpea starch powder. Furthermore, the tablets produced passed all the tests in physicochemical characteristics evaluation except hardness and disintegration test. Additionally, in vitro dissolution studies show that chickpea starch acted as a disintegrant instead of a binder in gliclazide IR tablets and its disintegrant properties were comparable to those of crospovidone, croscarmellose

  20. Physical Inactivity, Sedentary Behavior and Chronic Diseases

    OpenAIRE

    Gonz?lez, Karim?; Fuentes, Jorge; M?rquez, Jos? Luis

    2017-01-01

    New research into physical activity suggests that it is no longer sufficient just to meet minimum levels recommended by health guidelines in order to reduce cardiovascular risk. Both physical inactivity and sedentary behavior have their own health hazards and need to be addressed separately, in order to explore their different deleterious mechanisms. The aim of this review was to define and to characterize both concepts, and their relationship with major non-communicable chronic diseases. A P...

  1. Disproportionation of the calcium salt of atorvastatin in the presence of acidic excipients

    DEFF Research Database (Denmark)

    Christensen, Niels Peter Aae; Rantanen, Jukka; Cornett, Claus

    2012-01-01

    . Of the excipients investigated, citric acid and polyacrylic acid were found to induce disproportionation. Moreover, it was also observed that exposure to high relative humidity, elevated temperatures, and milling all promoted disproportionation. The results suggest that disproportionation of drug salts in powders......The aim of the present study was to combine vibrational spectroscopy and chemometrics for investigating excipient-induced disproportionation of the calcium salt of atorvastatin into the corresponding free acid form in environments relevant to manufacturing and storage of solid dosage formulations...

  2. Investigation of drug-excipient compatibility using rheological and thermal tools

    Science.gov (United States)

    Trivedi, Maitri R.

    HYPOTHESIS: We plan to investigate a different approach to evaluate drug-excipient physical compatibility using rheological and thermal tools as opposed to commonly used chemical techniques in pharmaceutical industry. This approach offers practical solutions to routinely associated problems arising with API's and commonly used hydrates forms of excipients. ABSTRACT: Drug-Excipient compatibility studies are an important aspect of pre-formulation and formulation development in pharmaceutical research and development. Various approaches have been used in pharmaceutical industry including use of thermal analysis and quantitative assessment of drug-excipient mixtures after keeping the samples under stress environment depending upon the type of formulation. In an attempt to provide better understanding of such compatibility aspect of excipients with different properties of API, various rheological and thermal studies were conducted on binary mixtures of excipients which exist in different hydrates. Dibasic Calcium Phosphate (DCP, anhydrous and dihydrate forms) and Lactose (Lac, anhydrous and monohydrate) were selected with cohesive API's (Acetaminophen and Aspirin). Binary mixtures of DCP and Lac were prepared by addition of 0% w/w to 50% w/w of the API into each powder blend. Rheological and thermal aspects were considered using different approaches such as powder rheometer, rotational shear cell and traditional rheometery approaches like angle of repose (AOR), hausner's ratio (HR) and cares index (CI). Thermal analysis was conducted using modulated differential scanning calorimetry (MDSC) and thermal effusivity. The data suggested that the powder rheometer showed distinctive understanding in the flowability behavior of binary mixtures with addition of increasing proportion of API's than traditional approaches. Thermal approaches revealed the potential interaction of water of crystallization DCP-D with the API (APAP) while such interactions were absent in DCP-A, while

  3. Exploring human inactivity in computer power consumption

    Science.gov (United States)

    Candrawati, Ria; Hashim, Nor Laily Binti

    2016-08-01

    Managing computer power consumption has become an important challenge in computer society and this is consistent with a trend where a computer system is more important to modern life together with a request for increased computing power and functions continuously. Unfortunately, previous approaches are still inadequately designed to handle the power consumption problem due to unpredictable workload of a system caused by unpredictable human behaviors. This is happens due to lack of knowledge in a software system and the software self-adaptation is one approach in dealing with this source of uncertainty. Human inactivity is handled by adapting the behavioral changes of the users. This paper observes human inactivity in the computer usage and finds that computer power usage can be reduced if the idle period can be intelligently sensed from the user activities. This study introduces Control, Learn and Knowledge model that adapts the Monitor, Analyze, Planning, Execute control loop integrates with Q Learning algorithm to learn human inactivity period to minimize the computer power consumption. An experiment to evaluate this model was conducted using three case studies with same activities. The result show that the proposed model obtained those 5 out of 12 activities shows the power decreasing compared to others.

  4. Modulation of the wettability of excipients by surfactant and its impacts on the disintegration and release of tablets.

    Science.gov (United States)

    Yang, Baixue; Xu, Lu; Wang, Qiuxiao; Li, Sanming

    2016-12-01

    To investigate the modulation of the wettability of excipients by different types of surfactants and its impacts on the disintegration of tablets and drug release. The critical micelle concentration (CMC) of surfactants, including sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), dodecyl trimethyl ammonium bromide (DTAB), cetyltrimethyl ammonium bromide (CTAB) and polysorbate (Tween-20 and Tween-80), was obtained using the platinum ring method. Contact angles of surfactant solutions on the excipient compacts and double-distilled water on the mixture of surfactant and the other excipient (magnesium stearate (MgSt) or sodium alginate (SA)) were measured by the sessile drop technique. Besides, surface free energy of excipients was calculated by the Owens method. Finally, the disintegration of tablets and in vitro dissolution testing were performed according to the method described in USP. The wettability of excipients could be enhanced to different extent with low concentration of surfactant solutions and maintained stable basically after CMC. For MgSt (hydrophobic excipient), the shorter the hydrophobic chain (C 12 , including SDS and DTAB), the better the wettability with the addition of surfactant in the formulation, leading to the shorter disintegration time of tablets and higher drug release rate. In contrast, the wettability of SA (hydrophilic excipient) was reduced by adding surfactant, resulting in the longer disintegration time of tablets and lower release rate. The modulation of the wetting of pharmaceutical excipients by surfactant had changed the disintegration time of tablets and drug release rate to a greater extent.

  5. Characterization of low crystallinity cellulose as a direct compression excipient: Effects of physicochemical properties of cellulose excipients on their tabletting characteristics

    Science.gov (United States)

    Kothari, Sanjeev Hukmichand

    A scale-up method for the preparation of a new excipient, low crystallinity powder cellulose (LCPC), was established. Physicochemical characterization of a series of LCPC materials was performed, and compared to the physicochemical properties of commercially existing cellulose excipients, microcrystalline cellulose (AvicelsRTM) and powdered celluloses (Solka Flocs RTM). Low crystallinity cellulose powders had high amorphous contents (>50%) and a low degree of polymerization (2 kg), typically showed low yield pressures (200 MPa), and intermediate compactability (250--600 MPa2) values. Mechanical characterization of the three types of cellulose materials, and the statistical models obtained for the results, indicated that a high porosity (>810%), a high average of amorphous content (>40%) and moisture content (>4%), and a low degree of polymerization (disintegration times (5 to 90 seconds) for LCPC tablets at low as well as high solid fractions suggest the high affinity of these materials to water, due to their high amorphous contents that expose a larger number of hydroxyl groups to water, compared to the more crystalline materials, such as microcrystalline celluloses, the tablets of which showed extremely long disintegration times (24 to 6000 seconds). The physicochemical and mechanical characterization of low crystallinity cellulose suggests it to be a promising direct compression excipient for immediate release tablet formulations.

  6. Blood Volume Response to Physical Activity and Inactivity

    Science.gov (United States)

    2007-07-01

    deconditioning effects of bed rest inactivity are independent of any disease state. The impor- tance of physical activity on reversing the effects of inactivity...Blood Volume Response to Physical Activity and Inactivity VICTOR A. CONVERTINO, PHD ABSTRACT: Data from both cross-sectional and longitu- dinal...studies provide compelling evidence that circulat- ing blood volume can be influenced by regular physical activity or inactivity. Expansion or contraction

  7. The Global Physical Inactivity Pandemic: An Analysis of Knowledge Production

    Science.gov (United States)

    Piggin, Joe; Bairner, Alan

    2016-01-01

    In July 2012, "The Lancet" announced a pandemic of physical inactivity and a global call to action to effect change. The worldwide pandemic is said to be claiming millions of lives every year. Asserting that physical inactivity is pandemic is an important moment. Given the purported scale and significance of physical inactivity around…

  8. Impact of inactivity and exercise on the vasculature in humans.

    NARCIS (Netherlands)

    Thijssen, D.H.J.; Maiorana, A.J.; O'Driscoll, G.; Cable, N.T.; Hopman, M.T.E.; Green, D.J.

    2010-01-01

    The effects of inactivity and exercise training on established and novel cardiovascular risk factors are relatively modest and do not account for the impact of inactivity and exercise on vascular risk. We examine evidence that inactivity and exercise have direct effects on both vasculature function

  9. Molecular ingredients of heterogeneous catalysis

    International Nuclear Information System (INIS)

    Somorjai, G.A.

    1982-06-01

    The purpose of this paper is to present a review and status report to those in theoretical chemistry of the rapidly developing surface science of heterogeneous catalysis. The art of catalysis is developing into science. This profound change provides one with opportunities not only to understand the molecular ingredients of important catalytic systems but also to develop new and improved catalyst. The participation of theorists to find answers to important questions is sorely needed for the sound development of the field. It is the authors hope that some of the outstanding problems of heterogeneous catalysis that are identified in this paper will be investigated. For this purpose the paper is divided into several sections. The brief Introduction to the methodology and recent results of the surface science of heterogeneous catalysis is followed by a review of the concepts of heterogeneous catalysis. Then, the experimental results that identified the three molecular ingredients of catalysis, structure, carbonaceous deposit and the oxidation state of surface atoms are described. Each section is closed with a summary and a list of problems that require theoretical and experimental scrutiny. Finally attempts to build new catalyst systems and the theoretical and experimental problems that appeared in the course of this research are described

  10. Molecular ingredients of heterogeneous catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Somorjai, G.A.

    1982-06-01

    The purpose of this paper is to present a review and status report to those in theoretical chemistry of the rapidly developing surface science of heterogeneous catalysis. The art of catalysis is developing into science. This profound change provides one with opportunities not only to understand the molecular ingredients of important catalytic systems but also to develop new and improved catalyst. The participation of theorists to find answers to important questions is sorely needed for the sound development of the field. It is the authors hope that some of the outstanding problems of heterogeneous catalysis that are identified in this paper will be investigated. For this purpose the paper is divided into several sections. The brief Introduction to the methodology and recent results of the surface science of heterogeneous catalysis is followed by a review of the concepts of heterogeneous catalysis. Then, the experimental results that identified the three molecular ingredients of catalysis, structure, carbonaceous deposit and the oxidation state of surface atoms are described. Each section is closed with a summary and a list of problems that require theoretical and experimental scrutiny. Finally attempts to build new catalyst systems and the theoretical and experimental problems that appeared in the course of this research are described.

  11. CONDITIONING MICROBIAL PRODUCTS CONTAINING NITROGEN FIXING BACTERIA WITH DIFFERENT SOLID EXCIPIENTS

    Directory of Open Access Journals (Sweden)

    DANIELA VINTILĂ

    2007-05-01

    Full Text Available The stability in real time of two strains of Rhizobium (Rhizobium meliloti and Rhizobium japonicum mixed with different excipients was evaluated during a 6- months period. The excipients studied were: peat, peat and calcium carbonate, zeolite, and ceramic. Liquid cultures and excipients mixtures were dried (12-14% humidity, sealed in plastic bags and preserved at +4oC. The cells were activated periodically by suspending aliquots from dry products in 0.9% saline solution. The viability of Rhizobium cells was evaluated by cultivation of diluted suspensions in YMA plates. The number of viable cells is decreasing during drying in all cases, increase in the first month of storage, and remains constant or decrease very slowly during storage for all obtained dry products containing rhizobia mixed with solid dry excipients. The highest number of viable cells at the end of the experiment was obtained in ceramic with Rhizobium japonicum (8x105 cells/gram, and the lowest number of viable cells was obtained in zeolite with Rhizobium meliloti (1,1x103 cells/gram.

  12. CONDITIONING MICROBIAL PRODUCTS CONTAINING NITROGEN FIXING BACTERIA WITH DIFFERENT SOLID EXCIPIENTS

    Directory of Open Access Journals (Sweden)

    VINTILĂ T.

    2007-01-01

    Full Text Available The stability in real time of two strains of Rhizobium (Rhizobium meliloti andRhizobium japonicum mixed with different excipients was evaluated during a6-months period. The excipients studied were: peat, peat and calciumcarbonate, zeolite, and ceramic. Liquid cultures and excipients mixtures weredried (12-14% humidity, sealed in plastic bags and preserved at +4oC. Thecells were activated periodically by suspending aliquots from dry products in0.9% saline solution. The viability of Rhizobium cells was evaluated bycultivation of diluted suspensions in YMA plates. The number of viable cells isdecreasing during drying in all cases, increase in the first month of storage,and remains constant or decrease very slowly during storage for all obtaineddry products containing rhizobia mixed with solid dry excipients. The highestnumber of viable cells at the end of the experiment was obtained in ceramicwith Rhizobium japonicum (8x105 cells/gram, and the lowest number ofviable cells was obtained in zeolite with Rhizobium meliloti (1,1x103cells/gram.

  13. Polymer excipients enable sustained drug release in low pH from mechanically strong inorganic geopolymers.

    Science.gov (United States)

    Jämstorp, Erik; Yarra, Tejaswi; Cai, Bing; Engqvist, Håkan; Bredenberg, Susanne; Strømme, Maria

    2012-01-01

    Improving acid resistance, while maintaining the excellent mechanical stability is crucial in the development of a sustained and safe oral geopolymer dosage form for highly potent opioids. In the present work, commercially available Methacrylic acid-ethyl acrylate copolymer, Polyethylene-glycol (PEG) and Alginate polymer excipients were included in dissolved or powder form in geopolymer pellets to improve the release properties of Zolpidem, herein acting as a model drug for the highly potent opioid Fentanyl. Scanning electron microscopy, compression strength tests and drug release experiments, in gastric pH 1 and intestinal pH 6.8 conditions, were performed. The polymer excipients, with an exception for PEG, reduced the drug release rate in pH 1 due to their ability to keep the pellets in shape, in combination with the introduction of an insoluble excipient, and thereby maintain a barrier towards drug diffusion and release. Neither geopolymer compression strength nor the release in pH 6.8 was considerably impaired by the incorporation of the polymer excipients. The geopolymer/polymer composites combine high mechanical strength and good release properties under both gastric and intestinal pH conditions, and are therefore promising oral dosage forms for sustained release of highly potent opioids.

  14. EVALUATION OF MODIFIED RICE STARCH, A NEW EXCIPIENT FOR DIRECT COMPRESSION

    NARCIS (Netherlands)

    BOS, CE; BOLHUIS, GK; LERK, CF; DUINEVELD, CAA

    1992-01-01

    The compression characteristics of modified rice starch (Primotab(R)ET), a new excipient for the preparation of tablets by direct compression is evaluated. Modified rice starch is an agglomerated rice starch product. It has excellent flowing and disintegration properties. In contrast to other

  15. Co-Processed Chitin-Mannitol as a New Excipient for Oro-Dispersible Tablets

    Directory of Open Access Journals (Sweden)

    Nidal Daraghmeh

    2015-03-01

    Full Text Available This study describes the preparation, characterization and performance of a novel excipient for use in oro-dispersible tablets (ODT. The excipient (Cop–CM consists of chitin and mannitol. The excipient with optimal physicochemical properties was obtained at a chitin: mannitol ratio of 2:8 (w/w and produced by roll compaction (RC. Differential scanning calorimetry (DSC, Fourier transform-Infrared (FT-IR, X-ray powder diffraction (XRPD and scanning electron microscope (SEM techniques were used to characterize Cop–CM, in addition to characterization of its powder and ODT dosage form. The effect of particle size distribution of Cop–CM was investigated and found to have no significant influence on the overall tablet physical properties. The compressibility parameter (a for Cop–CM was calculated from a Kawakita plot and found to be higher (0.661 than that of mannitol (0.576 due to the presence of the highly compressible chitin (0.818. Montelukast sodium and domperidone ODTs produced, using Cop–CM, displayed excellent physicochemical properties. The exceptional binding, fast wetting and superdisintegration properties of Cop–CM, in comparison with commercially available co-processed ODT excipients, results in a unique multifunctional base which can successfully be used in the formulation of oro-dispersible and fast immediate release tablets.

  16. Challenges and strategies to facilitate formulation development of pediatric drug products: Safety qualification of excipients.

    Science.gov (United States)

    Buckley, Lorrene A; Salunke, Smita; Thompson, Karen; Baer, Gerri; Fegley, Darren; Turner, Mark A

    2018-02-05

    A public workshop entitled "Challenges and strategies to facilitate formulation development of pediatric drug products" focused on current status and gaps as well as recommendations for risk-based strategies to support the development of pediatric age-appropriate drug products. Representatives from industry, academia, and regulatory agencies discussed the issues within plenary, panel, and case-study breakout sessions. By enabling practical and meaningful discussion between scientists representing the diversity of involved disciplines (formulators, nonclinical scientists, clinicians, and regulators) and geographies (eg, US, EU), the Excipients Safety workshop session was successful in providing specific and key recommendations for defining paths forward. Leveraging orthogonal sources of data (eg. food industry, agro science), collaborative data sharing, and increased awareness of the existing sources such as the Safety and Toxicity of Excipients for Paediatrics (STEP) database will be important to address the gap in excipients knowledge needed for risk assessment. The importance of defining risk-based approaches to safety assessments for excipients vital to pediatric formulations was emphasized, as was the need for meaningful stakeholder (eg, patient, caregiver) engagement. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Co-Processed Chitin-Mannitol as a New Excipient for Oro-Dispersible Tablets

    Science.gov (United States)

    Daraghmeh, Nidal; Chowdhry, Babur Z.; Leharne, Stephen A.; Al Omari, Mahmoud M. H.; Badwan, Adnan A.

    2015-01-01

    This study describes the preparation, characterization and performance of a novel excipient for use in oro-dispersible tablets (ODT). The excipient (Cop–CM) consists of chitin and mannitol. The excipient with optimal physicochemical properties was obtained at a chitin: mannitol ratio of 2:8 (w/w) and produced by roll compaction (RC). Differential scanning calorimetry (DSC), Fourier transform-Infrared (FT-IR), X-ray powder diffraction (XRPD) and scanning electron microscope (SEM) techniques were used to characterize Cop–CM, in addition to characterization of its powder and ODT dosage form. The effect of particle size distribution of Cop–CM was investigated and found to have no significant influence on the overall tablet physical properties. The compressibility parameter (a) for Cop–CM was calculated from a Kawakita plot and found to be higher (0.661) than that of mannitol (0.576) due to the presence of the highly compressible chitin (0.818). Montelukast sodium and domperidone ODTs produced, using Cop–CM, displayed excellent physicochemical properties. The exceptional binding, fast wetting and superdisintegration properties of Cop–CM, in comparison with commercially available co-processed ODT excipients, results in a unique multifunctional base which can successfully be used in the formulation of oro-dispersible and fast immediate release tablets. PMID:25830680

  18. Dissolution of ibuprofen enantiomers from coprecipitates and suspensions containing chiral excipients.

    Science.gov (United States)

    Janjikhel, R K; Adeyeye, C M

    1999-01-01

    The purpose of this research was to evaluate the stereospecific interaction of ibuprofen with chiral excipients such as hydroxypropyl-beta-cyclodextrin (HPCD), tartaric acid, sucrose, hydroxypropylmethylcellulose (HPMC), methylcellulose (MC), and a nonchiral excipient, citric acid. Coprecipitates of ibuprofen were prepared in molar ratios ranging between 1:0.5 and 1:10 by a solvent evaporation method and characterized using x-ray diffraction, Fourier-transform infrared (FTIR) spectroscopy, and dissolution testing. Phase solubility studies of ibuprofen were carried out by adding excess amount of ibuprofen to aqueous excipient solutions of varying concentrations. Interaction was studied in suspensions of ibuprofen with HPMC, MC, and sucrose stored at room temperature and 60 degrees C for 12 weeks. Solubility of ibuprofen in HPCD solutions increased 10-fold, whereas solubility decreased in the tartaric and citric acid solutions, a result of decreased pH with increased amount of the acids in which ibuprofen (pKa 4.8) is less soluble. Phase solubility diagrams of ibuprofen in aqueous HPCD, citric acid, and tartaric acid solutions showed no stereospecific differences in solubility of the two enantiomers. X-ray diffraction studies showed that ibuprofen exists in a crystalline form at low ibuprofen-to-excipient ratios, whereas at the higher ratios, it exists in an amorphous form. FTIR spectroscopy for HPCD coprecipitates showed a shift of the carbonyl stretching band of ibuprofen to a higher wavelength with a markedly decreased intensity, probably because of a breakdown in the intermolecular hydrogen bonding with ibuprofen and restriction of the drug molecule in the HPCD cavity, respectively. Dissolution profiles of the coprecipitates demonstrated higher dissolution rates than those of pure ibuprofen. The presence of chiral excipients did not appear to cause stereoselective release of the drug from the coprecipitates and the suspensions.

  19. Evaluation of microwave oven heating for prediction of drug-excipient compatibilities and accelerated stability studies.

    Science.gov (United States)

    Schou-Pedersen, Anne Marie V; Østergaard, Jesper; Cornett, Claus; Hansen, Steen Honoré

    2015-05-15

    Microwave ovens have been used extensively in organic synthesis in order to accelerate reaction rates. Here, a set up comprising a microwave oven combined with silicon carbide (SiC) plates for the controlled microwave heating of model formulations has been applied in order to investigate, if a microwave oven is applicable for accelerated drug stability testing. Chemical interactions were investigated in three selected model formulations of drug and excipients regarding the formation of ester and amide reaction products. In the accelerated stability studies, a design of experiments (DoE) approach was applied in order to be able to rank excipients regarding reactivity: Study A: cetirizine with PEG 400, sorbitol, glycerol and propylene glycol. Study B: 6-aminocaproic acid with citrate, acetate, tartrate and gluconate. Study C: atenolol with citric, tartaric, malic, glutaric, and sorbic acid. The model formulations were representative for oral solutions (co-solvents), parenteral solutions (buffer species) and solid dosage forms (organic acids applicable for solubility enhancement). The DoE studies showed overall that the same impurities were generated by microwave oven heating leading to temperatures between 150°C and 180°C as compared to accelerated stability studies performed at 40°C and 80°C using a conventional oven. Ranking of the reactivity of the excipients could be made in the DoE studies performed at 150-180°C, which was representative for the ranking obtained after storage at 40°C and 80°C. It was possible to reduce the time needed for drug-excipient compatibility testing of the three model formulations from weeks to less than an hour in the three case studies. The microwave oven is therefore considered to be an interesting alternative to conventional thermal techniques for the investigation of drug-excipient interactions during preformulation. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Novel botanical ingredients for beverages.

    Science.gov (United States)

    Gruenwald, Joerg

    2009-01-01

    Natural substances are generally preferred over chemical ones and are generally seen as healthy. The increasing demand for natural ingredients, improving health and appearance, is also attracting beverages as the fastest growing segment on the functional food market. Functional beverages are launched as fortified water, tea, diary or juices claiming overall nutrition, energy, anti-aging or relaxing effects. The substitution of so called superfruits, such as berries, grapes, or pomegranate delivers an effective range of beneficial compounds, including vitamins, fatty acids, minerals, and anti-oxidants. In this context, new exotic and African fruits could be useful sources in the near future. Teas and green botanicals, such as algae or aloe vera are also rich in effective bioactives and have been used traditionally. The botanical kingdom offers endless possibilities.

  1. What determines ingredient awareness of consumers? A study on ten functional food ingredients

    NARCIS (Netherlands)

    Bornkessel, S.; Bröring, S.; Omta, S.W.F.; Trijp, van J.C.M.

    2014-01-01

    Given the importance of consumer awareness of functional food ingredients for healthy food choices, the aim of this study is to explore consumers’ ingredient awareness and the determinants which influence the awareness about functional food ingredients. A sample of 200 German consumers was

  2. Electrostatic separation for functional food ingredient production

    NARCIS (Netherlands)

    Wang, J.

    2016-01-01

    Summary Dry fractionation is a promising alternative to wet extraction processes for production of food ingredients, since it uses hardly any water, consumes less energy and retains the native functionality of the ingredients. It combines milling and dry separation to enrich

  3. Electrostatic separation for functional food ingredient production

    NARCIS (Netherlands)

    Wang, J.

    2016-01-01

    Summary

    Dry fractionation is a promising alternative to wet extraction processes for production of food ingredients, since it uses hardly any water, consumes less energy and retains the native functionality of the ingredients. It combines milling and dry separation to

  4. Effects of excipients on hydrate formation in wet masses containing theophylline

    DEFF Research Database (Denmark)

    Airaksinen, Sari; Luukkonen, Pirjo; Jørgensen, Anna

    2003-01-01

    its dissolution rate. The aim of this study was to investigate whether excipients, such as alpha-lactose monohydrate or the highly water absorbing silicified microcrystalline cellulose (SMCC) can influence the hydrate formation of theophylline. In particular, the aim was to study if SMCC offers...... protection against the formation of theophylline monohydrate relative to alpha-lactose monohydrate in wet masses after an overnight equilibration and the stability of final granules during controlled storage. In addition, the aim was to study the use of spectroscopic methods to identify hydrate formation...... in the formulations containing excipients. Off-line evaluation of materials was performed using X-ray powder diffractometry, near infrared and Raman spectroscopy. alpha-Lactose monohydrate with minimal water absorbing potential was not able to prevent but enhanced hydrate formation of theophylline. Even though SMCC...

  5. Correlation between calculated molecular descriptors of excipient amino acids and experimentally observed thermal stability of lysozyme

    DEFF Research Database (Denmark)

    Meng-Lund, Helena; Friis, Natascha; van de Weert, Marco

    2017-01-01

    analysis was applied to correlate the descriptors with the experimental results. It was possible to identify descriptors, i.e. amino acids properties, with a positive influence on either transition temperature or aggregation onset time, or both. A high number of hydrogen bond acceptor moieties was the most......A quantitative structure-property relationship (QSPR) between protein stability and the physicochemical properties of excipients was investigated to enable a more rational choice of stabilizing excipients than prior knowledge. The thermal transition temperature and aggregation time were determined...... for lysozyme in combination with 13 different amino acids using high throughput fluorescence spectroscopy and kinetic static light scattering measurements. On the theoretical side, around 200 2D and 3D molecular descriptors were calculated based on the amino acids' chemical structure. Multivariate data...

  6. Evaluation of microwave oven heating for prediction of drug-excipient compatibilities and accelerated stability studies

    DEFF Research Database (Denmark)

    Schou-Pedersen, Anne Marie V; Østergaard, Jesper; Cornett, Claus

    2015-01-01

    , if a microwave oven is applicable for accelerated drug stability testing. Chemical interactions were investigated in three selected model formulations of drug and excipients regarding the formation of ester and amide reaction products. The accelerated stability studies performed in the microwave oven using...... a design of experiments (DoE) approach in order to be able to rank excipients regarding reactivity: Study A: cetirizine with PEG 400, sorbitol, glycerol and propylene glycol. Study B: 6-aminocaproic acid with citrate, acetate, tartrate and gluconate. Study C: atenolol with citric, tartaric, malic, glutaric......, and sorbic acid. The model formulations were representative for oral solutions (co-solvents), parenteral solutions (buffer species) and solid dosage forms (organic acids applicable for solubility enhancement). The DoE studies showed overall that the same impurities were generated by microwave oven heating...

  7. Co-processed MCC-Eudragit® E excipients for extrusion-spheronization.

    Science.gov (United States)

    Goyanes, Alvaro; Souto, Consuelo; Martínez-Pacheco, Ramón

    2011-11-01

    This study investigates the extrusion-spheronization performance of some mixtures of co-processed microcrystalline cellulose and Eudragit® E (as excipients) and sorbitol (as soluble filler-disintegrant). Attention is focused on the dissolution rate of low water solubility drugs (hydrochlorothiazide is used as a model drug) from pellets prepared with these mixtures. All pellet formulations studied presented adequate morphological, flow and mechanical properties. The pellets prepared with co-processed MCC-Eudragit® E and sorbitol show a drug dissolution rate dependent on the content of Eudragit® E in the co-processed excipient and on the proportion of sorbitol incorporated. Furthermore, the pellets made with co-processed MCC-Eudragit® E incorporating the higher proportion of sorbitol (50%) show a very high dissolution rate of hydrochlorothiazide (HCT) and undergo rapid disintegration in the dissolution medium. Copyright © 2011 Elsevier B.V. All rights reserved.

  8. Retracted: Molecular characterization of excipients' preferential interactions with therapeutic monoclonal antibodies.

    Science.gov (United States)

    Kim, Jehoon; Krebs, Mark R H; Trout, Bernhardt L

    2018-02-01

    Retraction: Molecular characterization of excipients' preferential interactions with therapeutic monoclonal antibodies by Jehoon Kim, Mark R. H. Krebs and Bernhardt L. Trout The above article from the Journal of Pharmacy and Pharmacology, first published online on 4 August 2017 in Wiley Online Library (wileyonlinelibrary.com), has been retracted by agreement between the authors, the journal Editor-in-Chief, Professor David Jones, and John Wiley & Sons Ltd. The authors discovered that the analysis of simulations was faulty making the data incorrect. Reference Kim J et al. Molecular characterization of excipients' preferential interactions with therapeutic monoclonal antibodies. J Pharm Pharmacol 2017. https://doi.org/10.1111/jphp.12787. © 2017 Royal Pharmaceutical Society.

  9. The potential of excipients to improve the efficiency of immuno-oncology therapy.

    Directory of Open Access Journals (Sweden)

    Shireesh Apte

    2017-09-01

    Full Text Available The cocktail of substances used in cell culture media to cryopreserve, transfect, grow, expand, fractionate, concentrate, wash and remove impurities from leukapheresis harvested T-cells are functional excipients. Even though most of them are not present in the final product, they nonetheless have the potential – during in vitro manufacture - to determine the subsequent in vivo proliferative capacity, persistance, safety and compositional phenotype of the injected re-engineered T-cells. Thus, while the chimeric antigen receptor and co-stimulatory signaling molecules are necessary for CAR-T cell functionality, they may not be sufficient to achieve this functionality unless manufactured using the right cocktail of functional excipients.

  10. The economic cost of physical inactivity in China.

    Science.gov (United States)

    Zhang, Juan; Chaaban, Jad

    2013-01-01

    To estimate the total economic burden of physical inactivity in China. The costs of physical inactivity combine the medical and non-medical costs of five major Non Communicable Diseases (NCDs) associated with inactivity. The national data from the Chinese Behavioral Risk Factors Surveillance Surveys (2007) and the National Health Service Survey (2003) are used to compute population attributable risks (PARs) of inactivity for each major NCD. Costs specific to inactivity are obtained by multiplying each disease costs by the PAR for each NCD, by incorporating the inactivity effects through overweight and obesity. Physical inactivity contributes between 12% and 19% to the risks associated with the five major NCDs in China, namely coronary heart disease, stroke, hypertension, cancer, and type 2 diabetes. Physical inactivity is imposing a substantial economic burden on the country, as it is responsible alone for more than 15% of the medical and non-medical yearly costs of the main NCDs in the country. The high economic burden of physical inactivity implies the need to develop more programs and interventions that address this modifiable behavioral risk, in order to curb the rising NCDs epidemic in China. Copyright © 2012 Elsevier Inc. All rights reserved.

  11. Evaluation of Colocasia esculenta Starch as an Alternative Tablet Excipient to Maize Starch: Assessment by Preformulation and Formulation Studies

    OpenAIRE

    Kusuma. R; Venkat Reddy. P; Samba Shiva Rao. A

    2015-01-01

    Starch isolated from Colocasia esculenta plant was studied as an alternative pharmaceutical excipient to maize and potato starch. The Colocasia esculenta starch has been evaluated by series of tests as mentioned in Indian Pharmacopoeia before being used for evaluation. It was tested along with maize and potato starch as an alternative excipient by performing battery of preformulation and formulation tests. The results obtained for Colocasia esculenta starch was comparable with maize starch an...

  12. Drug-Drug/Drug-Excipient Compatibility Studies on Curcumin using Non-Thermal Methods

    OpenAIRE

    Moorthi Chidambaram; Kathiresan Krishnasamy

    2014-01-01

    Purpose: Curcumin is a hydrophobic polyphenol isolated from dried rhizome of turmeric. Clinical usefulness of curcumin in the treatment of cancer is limited due to poor aqueous solubility, hydrolytic degradation, metabolism, and poor oral bioavailability. To overcome these limitations, we proposed to fabricate curcumin-piperine, curcumin-quercetin and curcumin-silibinin loaded polymeric nanoformulation. However, unfavourable combinations of drug-drug and drug-excipient may result in interacti...

  13. Analysis of Pharmaceutical Excipient MCC Avicel PH102 Using Compaction Equations

    Directory of Open Access Journals (Sweden)

    Peciar Peter

    2016-07-01

    Full Text Available This paper focuses on the characterization of the tabletting process and analysis one of the most common pharmaceutical excipients MCC Avicel PH102 by Heckel, Kawakita, Cooper-Eaton and Adams compaction equations. Experimental material was determined by measuring its parameters as particle size distribution, angle of wall friction and flow properties and for more detailed characteristics of the material particles, microscopy images of the powder before and after compressing were created.

  14. Effects of Highly Hygroscopic Excipients on the Hydrolysis of Simvastatin in Tablet at High Relative Humidity

    OpenAIRE

    Chen, W. L.; Guo, D. W.; Shen, Y. Y.; Guo, S. R.; Ruan, K. P.

    2012-01-01

    Effects of highly hygroscopic sorbitol, citric acid, sodium carboxymethyl cellulose or polyvinylpolypyrrolidone, on the hydrolysis of simvastatin in tablets at 25?/90% RH were studied. The simvastatin tablets were prepared by direct powder compression. Simvastatin and its hydrolyte, simvastatin acid, were quantitatively analysed by high performance liquid chromotography. The hygroscopicity, water swelling ratio, water solubility and pH of the four hygroscopic excipients were investigated. Dur...

  15. Development of lyophilization cycle and effect of excipients on the stability of catalase during lyophilization

    OpenAIRE

    Lale, Shantanu V; Goyal, Monu; Bansal, Arvind K

    2011-01-01

    Introduction: The purpose of the present study was to screen excipients such as amino acids and non-aqueous solvents for their stabilizing effect on catalase, a model protein, for lyophilization. The present study also includes optimization of lyophilization cycle for catalase formulations, which is essential from the commercial point of view, since lyophilization is an extremely costly process. Materials and Methods: Activity of catalase was determined using catalase activity assay. Differen...

  16. Reaction between drug substances and pharmaceutical excipients: formation of esters between cetirizine and polyols.

    Science.gov (United States)

    Yu, He; Cornett, Claus; Larsen, Jesper; Hansen, Steen Honoré

    2010-11-02

    Reactions between active drug substances and excipients are of interest in the drug formulation process and should also be considered in the following storage of final preparations. Some excipients react more readily with certain chemical groups in drug substances and in the present paper the ester formation between a drug substance having a carboxylic acid moiety and some polyols are described. The drug substance cetirizine was chosen as the model substance as it is already marketed and used as a common drug for treatment of allergic reactions. Among the marketed products are oral solutions and oral drops containing excipients like sorbitol and glycerol. It was found that the carboxylic acid cetirizine readily reacts with sorbitol and glycerol to form monoesters. At a temperature as low as 40 degrees C, more than 1% of the cetirizine content was transformed into a monoester within 1 week using concentrations similar to those used in marketed preparations. The kinetic studies of the reaction performed at 40, 60 and 80 degrees C also revealed that the esters were unstable and they degraded especially at higher temperatures. Analysis of two marketed preparations having expiry dates in 2011 showed content of the cetirizine esters corresponding to a range from 0.1 to 0.3% of the declared cetirizine content. Copyright (c) 2010 Elsevier B.V. All rights reserved.

  17. Effects of highly hygroscopic excipients on the hydrolysis of simvastatin in tablet at high relative humidity.

    Science.gov (United States)

    Chen, W L; Guo, D W; Shen, Y Y; Guo, S R; Ruan, K P

    2012-11-01

    Effects of highly hygroscopic sorbitol, citric acid, sodium carboxymethyl cellulose or polyvinylpolypyrrolidone, on the hydrolysis of simvastatin in tablets at 25°/90% RH were studied. The simvastatin tablets were prepared by direct powder compression. Simvastatin and its hydrolyte, simvastatin acid, were quantitatively analysed by high performance liquid chromotography. The hygroscopicity, water swelling ratio, water solubility and pH of the four hygroscopic excipients were investigated. During the investigation period, the weight gain of sorbitol or citric acid increased faster than that of polyvinylpolypyrrolidone or sodium carboxymethyl cellulose at 25°/90% RH, accordingly, the moisture sorption of the tablets containing citric acid or sorbitol (T-3 or T-6) were more than that of the tablets containing sodium carboxymethyl cellulose or polyvinylpolypyrrolidone (T-4 or T-5). The increase of simvastatin acid content with time at 25°/90% RH for the tablets was in the following order: T-6 < T-4 < T-3 < T-5. The effects of the four excipients on the hydrolysis of simvastatin in tablet were related to not only their hygroscopicity but also their other properties, such as moisture retention capacity and pH. Sorbitol as hygroscopic excipient in tablet can most effectively prevent the hydrolysis of simvastatin in tablet.

  18. The Effect of Specific Surface Area of Chitin-Metal Silicate Coprocessed Excipient on the Chemical Decomposition of Cefotaxime Sodium.

    Science.gov (United States)

    Al-Nimry, Suhair S; Alkhamis, Khouloud A; Alzarieni, Kawthar Z

    2017-02-01

    Chitin-metal silicates are multifunctional excipients used in tablets. Previously, a correlation between the surface acidity of chitin-calcium and chitin-magnesium silicate and the chemical decomposition of cefotaxime sodium was found but not with chitin-aluminum silicate. This lack of correlation could be due to the catalytic effect of silica alumina or the difference in surface area of the excipients. The objective of this study was to investigate the effect of the specific surface area of the excipient on the chemical decomposition of cefotaxime sodium in the solid state. Chitin was purified and coprocessed with different metal silicates to prepare the excipients. The specific surface area was determined using gas adsorption. The chemical decomposition was studied at constant temperature and relative humidity. Also, the degradation in solution was studied. A correlation was found between the degradation rate constant and the surface area of chitin-aluminum and chitin-calcium silicate but not with chitin-magnesium silicate. This was due to the small average pore diameter of this excipient. Also, the degradation in solution was slower than in solid state. In conclusion, the stability of cefotaxime sodium was dependent on the surface area of the excipient in contact with the drug. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  19. Utilizing quantitative certificate of analysis data to assess the amount of excipient lot-to-lot variability sampled during drug product development.

    Science.gov (United States)

    Kushner, Joseph

    2013-01-01

    Understanding variability in excipient physico-chemical properties is becoming an important aspect of Quality-by-Design drug product development. However, present experimental methods have only been able to study a few physico-chemical properties for a few excipient lots due to time, cost, and sample gathering considerations. An alternative analysis method is proposed here that shows how quantitative physico-chemical property data reported in vendor certificates of analysis can evaluate excipient lot-to-lot variability in a comprehensive and low cost manner. Microcrystalline cellulose, spray-dried lactose, and magnesium stearate were selected as commonly-used excipients for this demonstration. The proposed analysis method offers drug product developers several advantages over present experimental methods, including the ability to: (1) examine excipient products for manufacturing site and/or year-to-year variations, (2) quantify a domain of prior experience for each excipient by determining the percentage of excipient lots contained within a multi-dimensional ellipsoid described by the excipient lots used during drug product development, and (3) rationally select excipient lots from the vendors inventory to maximize the domain of prior experience throughout the drug development process. For cases where certificate of analysis data may contain insufficient information, drug product developers and excipient vendors should work together to identify more appropriate datasets for analysis.

  20. Physical inactivity, depression, and risk of cardiovascular mortality

    NARCIS (Netherlands)

    Kamphuis, M.H.; Geerlings, M.I.; Tijhuis, M.A.R.; Giampaoli, S.; Nissinen, A.; Grobbee, D.E.; Kromhout, D.

    2007-01-01

    Purpose: Studies indicate that depression may increase risk of cardiovascular disease (CVD) in addition to classical risk factors. One of the hypotheses to explain this relation is that depressed subjects become physically inactive. We set out to determine the role of physical inactivity in the

  1. Estimating the burden of disease attributable to physical inactivity in ...

    African Journals Online (AJOL)

    Overall in adults 2 15 years in 2000, 30% of ischaemic heart disease, 27% of colon cancer, 22% of ischaemic stroke, 20% of type 2 diabetes, and 17% of breast cancer were attributable to physical inactivity. Physical inactivity was estimated to have caused 17 037 (95% uncertainty interval 11 394 - 20 407), or 3.3% (95% ...

  2. Physical inactivity and muscle oxidative capacity in humans

    DEFF Research Database (Denmark)

    Gram, Martin; Dahl, Rannvá; Dela, Flemming

    2014-01-01

    literature on the effects of different models of inactivity on muscle oxidative capacity in humans. Effects of physical inactivity include decreased mitochondrial content, decreased activity of oxidative enzymes, changes in markers of oxidative stress and a decreased expression of genes and contents...

  3. Physical inactivity and associated factors in chronic disease patients ...

    African Journals Online (AJOL)

    Physical inactivity and associated factors in chronic disease patients in Cambodia, Myanmar and Vietnam. ... Several factors were identified which may assist in programmes to promote physical activity in this population. Keywords: Physical inactivity, risk factors, chronic disease patients, Cambodia, Myanmar, Vietnam ...

  4. The physical inactivity matrix: lessons from the classification of physical inactivity interventions.

    Science.gov (United States)

    Kypri, Kypros; Donaldson, Alex; Johnstone, Elizabeth

    2006-05-01

    Physical inactivity (PI), a leading modifiable cause of disease and injury, is endemic in industrialised nations. Although considerable research has been undertaken in this field, we lack a system to synthesise the research literature to inform policy and identify research needs. The aims of this study were to (1) develop a system to classify physical inactivity intervention studies, (2) examine the distribution of PI interventions published in the peer-reviewed health literature using the system, and (3) consider implications for future research. We developed the Physical Inactivity Matrix (PIM), with 12 intervention points, created by the intersection of two dimensions: the intervention target (individual, physical environment and social/cultural environment) and the activity focus (transport, work/school, leisure and consumer). A formal search of the health research literature identified 529 eligible studies and each was classified into one of the 12 cells of the PIM. Most studies were categorised as: individual-leisure (68%), individual-work/school (12%) or social/cultural environment-leisure (13%). Only 4% targeted the physical environment. The findings of this initial application of the PIM support the call for greater investment in policies, interventions and research that focus on the relationship between the environment and PI, and transportation in particular. There would be merit in establishing the inter-rater reliability of the PIM and applying it to a wider variety of studies, including those published in the transportation and urban planning literatures. The PIM could be a useful tool for monitoring trends in research directions and funding levels over time and across countries.

  5. Influence of excipients on characteristics and release profiles of poly(ε-caprolactone) microspheres containing immunoglobulin G

    Energy Technology Data Exchange (ETDEWEB)

    Erdemli, Özge [Department of Engineering Sciences, Middle East Technical University, Ankara (Turkey); Keskin, Dilek [Department of Engineering Sciences, Middle East Technical University, Ankara (Turkey); Biomaterials and Tissue Engineering Center of Excellence, Middle East Technical University, Ankara (Turkey); Tezcaner, Ayşen, E-mail: tezcaner@metu.edu.tr [Department of Engineering Sciences, Middle East Technical University, Ankara (Turkey); Biomaterials and Tissue Engineering Center of Excellence, Middle East Technical University, Ankara (Turkey)

    2015-03-01

    Protein instability during microencapsulation has been one of the major drawbacks of protein delivery systems. In this study, the effects of various excipients (poly vinyl alcohol, glucose, starch, heparin) on the stability of encapsulated human immunoglobulin G (IgG) in poly(ε-caprolactone) (PCL) microspheres and on microsphere characteristics were investigated before and after γ-sterilization. Microspheres formulated without any excipients and with glucose had a mean particle size around 3–4 μm whereas the mean particle sizes of other microspheres were around 5–6 μm. Use of PVA significantly increased the IgG-loading and encapsulation efficiency of microspheres. After γ-irradiation, IgG stability was mostly maintained in the microspheres with excipients compared to microspheres without any excipients. According to the μBCA results, microspheres without any excipient showed a high initial burst release as well as a fast release profile among all groups. Presence of PVA decreased the loss in the activity of IgG released before (completely retained after 6 h and 15.69% loss after 7 days) and after γ-irradiation (26.04% loss and 52.39% loss after 6 h and 7 days, respectively). The stabilization effect of PVA on the retention of the activity of released IgG was found more efficient compared to other groups formulated with carbohydrates. - Highlights: • Good excipient provides retention of protein stability during microencapsulation. • PVA was more effective on retention of the IgG stability compared to carbohydrates. • Starch was not an appropriate excipient for the retention of IgG stability.

  6. Gastrointestinal lipolysis of lipid-based excipients intended for the oral drug delivery of poorly water-soluble drugs

    OpenAIRE

    Fernandez Sylvie; Carrière Frédéric; Jannin Vincent

    2010-01-01

    Labrasol® and Gelucire® 44/14 are lipid-based excipients used for the oral drug delivery of poorly water-soluble drugs. These macrogolglycerides are composed of acylglycerols and PEG esters, potential substrates of digestive lipases. We developed an in vitro method to simulate the gastrointestinal lipolysis of these excipients and to evaluate the impact of lipolysis in vivo. At the end of the gastric phase, the composition of both excipients was significantly modified underlining the importan...

  7. Physical inactivity, insulin resistance, and the oxidative-inflammatory loop.

    Science.gov (United States)

    Gratas-Delamarche, A; Derbré, F; Vincent, S; Cillard, J

    2014-01-01

    Epidemiological data indicate that physical inactivity, a main factor of global energetic imbalance, is involved in the worldwide epidemic of obesity and metabolic disorders such as insulin resistance. Although the complex pathogenesis of insulin resistance is not fully understood, literature data accumulated during the past decades clearly indicate that the activation of the oxidative-inflammatory loop plays a major role. By activating the oxidative-inflammatory loop in insulin-sensitive tissues, fat gain and adipose tissue dysfunction likely contribute to induce insulin resistance during chronic and prolonged physical inactivity. However, in the past years, evidence has emerged showing that early insulin resistance also occurs after very short-term exposure to physical inactivity (1-7 days) without any fat gain or energetic imbalance. The possible role of liver disturbances or endothelial dysfunction is suggested, but further studies are necessary to really conclude. Inactive skeletal muscle probably constitutes the primary triggering tissue for the development of early insulin resistance. In the present review, we discuss on the current knowledge about the effect of physical inactivity on whole-body and peripheral insulin sensitivity, and how local inflammation and oxidative stress arising with physical inactivity could potentially induce insulin resistance. We assume that early muscle insulin resistance allows the excess nutrients to shift in the storage tissues to withstand starvation through energy storage. We also consider when chronic and prolonged, physical inactivity over an extended period of time is an underestimated contributor to pathological insulin resistance and hence indirectly to numerous chronic diseases.

  8. Effect of Common Excipients on the Oral Drug Absorption of Biopharmaceutics Classification System Class 3 Drugs Cimetidine and Acyclovir.

    Science.gov (United States)

    Vaithianathan, Soundarya; Haidar, Sam H; Zhang, Xinyuan; Jiang, Wenlei; Avon, Christopher; Dowling, Thomas C; Shao, Changxing; Kane, Maureen; Hoag, Stephen W; Flasar, Mark H; Ting, Tricia Y; Polli, James E

    2016-02-01

    The objective was to assess the impact of larger than conventional amounts of 14 commonly used excipients on Biopharmaceutics Classification System (BCS) class 3 drug absorption in humans. Cimetidine and acyclovir were used as model class 3 drugs across three separate four-way crossover bioequivalence (BE) studies (n = 24 each) in healthy human volunteers, denoted as study 1A, 1B, and 2. In study 1A and 1B, three capsule formulations of each drug were manufactured, collectively involving 14 common excipients. Capsule formulations that incorporated hydroxypropyl methylcellulose (HPMC) or magnesium stearate exhibited lower absorption. The cimetidine commercial solution contained sorbitol and also resulted in lower absorption. Hence, in study 2, two capsule formulations with lower amounts of HPMC and magnesium stearate, the sorbitol-containing commercial solution, and a sorbitol-free solution were assessed for BE. Overall, 12 common excipients were found in large amounts to not impact BCS class 3 drug absorption in humans, such that these excipients need not be qualitatively the same nor quantitatively very similar to reference, but rather simply be not more than the quantities studied here. Meanwhile, for each HPMC and microcrystalline cellulose, BCS class 3 biowaivers require these two excipients to be qualitatively the same and quantitatively very similar to the reference. Copyright © 2016. Published by Elsevier Inc.

  9. Novel insights into excipient effects on the biopharmaceutics of APIs from different BCS classes: Lactose in solid oral dosage forms.

    Science.gov (United States)

    Kubbinga, Marlies; Moghani, Laura; Langguth, Peter

    2014-09-30

    Excipients encompass a wide range of properties that are of importance for the resulting drug product. Regulatory guidelines on biowaivers for immediate release formulations require an in depth understanding of the biopharmaceutic effects of excipients in order to establish bioequivalence between two different products carrying the same API based on dissolution tests alone. This paper describes a new approach in evaluating biopharmaceutic excipient effects. Actually used quantities of a model excipient, lactose, formulated in combination with APIs from different BCS classes were evaluated. The results suggest that companies use different (relative) amounts depending on the characteristics of the API. The probability of bioinequivalence due to a difference in lactose content between test and reference products was classified as low for BCS class I APIs and medium for BCS class II and III APIs, whereas a high probability was assigned to the combination of lactose and BCS class IV APIs. If repeated for other excipients, this retrospective, top-down approach may lead to a new database and more widespread applications of the biowaiver approach. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Allergenic Ingredients in Personal Hygiene Wet Wipes.

    Science.gov (United States)

    Aschenbeck, Kelly A; Warshaw, Erin M

    Wet wipes are a significant allergen source for anogenital allergic contact dermatitis. The aim of the study was to calculate the frequency of potentially allergenic ingredients in personal hygiene wet wipes. Ingredient lists from brand name and generic personal hygiene wet wipes from 4 large retailers were compiled. In the 54 personal hygiene wet wipes evaluated, a total of 132 ingredients were identified (average of 11.9 ingredients per wipe). The most common ingredients were Aloe barbadensis (77.8%), citric acid (77.8%), fragrance (72.2%), sorbic acid derivatives (63.0%), tocopherol derivatives (63.0%), glycerin (59.3%), phenoxyethanol (55.6%), disodium cocoamphodiacetate (53.7%), disodium ethylenediaminetetraacetic acid (EDTA) (42.6%), propylene glycol (42.6%), iodopropynyl butylcarbamate (40.7%), chamomile extracts (38.9%), sodium benzoate (35.2%), bronopol (22.2%), sodium citrate (22.2%), lanolin derivatives (20.4%), parabens (20.4%), polyethylene glycol derivatives (18.5%), disodium phosphate (16.7%), dimethylol dimethyl hydantoin (DMDM) (14.8%), and cocamidopropyl propylene glycol (PG)-dimonium chloride phosphate (11.1%). Of note, methylisothiazolinone (5.6%) was uncommon; methylchloroisothiazolinone was not identified in the personal hygiene wet wipes examined. There are many potential allergens in personal hygiene wet wipes, especially fragrance and preservatives.

  11. The effects of excipients on protein aggregation during agitation: an interfacial shear rheology study.

    Science.gov (United States)

    Liu, Lu; Qi, Wei; Schwartz, Daniel K; Randolph, Theodore W; Carpenter, John F

    2013-08-01

    We investigated the effects of excipients in solutions of keratinocyte growth factor 2 (KGF-2) on protein aggregation during agitation as well as on interfacial shear rheology at the air-water interface. Samples were incubated with or without agitation, and in the presence or absence of the excipients heparin, sucrose, or polysorbate 80 (PS80). The effect of excipients on the extent of protein aggregation was determined by UV-visible spectroscopy and micro-flow imaging. Interfacial shear rheology was used to detect the gelation time and strength of protein gels at the air-water interface. During incubation, protein particles of size ≥1 μm and insoluble aggregates formed faster for KGF-2 solutions subjected to agitation. Addition of either heparin or sucrose promoted protein aggregation during agitation. In contrast, PS80 substantially inhibited agitation-induced KGF-2 aggregation but facilitated protein particulate formation in quiescent solutions. The combination of PS80 and heparin or sucrose completely prevented protein aggregation during both nonagitated and agitated incubations. Interfacial rheological measurements showed that KGF-2 in buffer alone formed an interfacial gel within a few minutes. In the presence of heparin, KGF-2 interfacial gels formed too quickly for gelation time to be determined. KGF-2 formed gels in about 10 min in the presence of sucrose. The presence of PS80 in the formulation inhibited gelation of KGF-2. Furthermore, the interfacial gels formed by the protein in the absence of PS80 were reversible when PS80 was added to the samples after gelation. Therefore, there is a correspondence between formulations that exhibited interfacial gelation and formulations that exhibited agitation-induced aggregation. Copyright © 2013 Wiley Periodicals, Inc.

  12. Evidence-based nanoscopic and molecular framework for excipient functionality in compressed orally disintegrating tablets.

    Directory of Open Access Journals (Sweden)

    Ali Al-Khattawi

    Full Text Available The work investigates the adhesive/cohesive molecular and physical interactions together with nanoscopic features of commonly used orally disintegrating tablet (ODT excipients microcrystalline cellulose (MCC and D-mannitol. This helps to elucidate the underlying physico-chemical and mechanical mechanisms responsible for powder densification and optimum product functionality. Atomic force microscopy (AFM contact mode analysis was performed to measure nano-adhesion forces and surface energies between excipient-drug particles (6-10 different particles per each pair. Moreover, surface topography images (100 nm2-10 µm2 and roughness data were acquired from AFM tapping mode. AFM data were related to ODT macro/microscopic properties obtained from SEM, FTIR, XRD, thermal analysis using DSC and TGA, disintegration testing, Heckel and tabletability profiles. The study results showed a good association between the adhesive molecular and physical forces of paired particles and the resultant densification mechanisms responsible for mechanical strength of tablets. MCC micro roughness was 3 times that of D-mannitol which explains the high hardness of MCC ODTs due to mechanical interlocking. Hydrogen bonding between MCC particles could not be established from both AFM and FTIR solid state investigation. On the contrary, D-mannitol produced fragile ODTs due to fragmentation of surface crystallites during compression attained from its weak crystal structure. Furthermore, AFM analysis has shown the presence of extensive micro fibril structures inhabiting nano pores which further supports the use of MCC as a disintegrant. Overall, excipients (and model drugs showed mechanistic behaviour on the nano/micro scale that could be related to the functionality of materials on the macro scale.

  13. Evidence-Based Nanoscopic and Molecular Framework for Excipient Functionality in Compressed Orally Disintegrating Tablets

    Science.gov (United States)

    Al-khattawi, Ali; Alyami, Hamad; Townsend, Bill; Ma, Xianghong; Mohammed, Afzal R.

    2014-01-01

    The work investigates the adhesive/cohesive molecular and physical interactions together with nanoscopic features of commonly used orally disintegrating tablet (ODT) excipients microcrystalline cellulose (MCC) and D-mannitol. This helps to elucidate the underlying physico-chemical and mechanical mechanisms responsible for powder densification and optimum product functionality. Atomic force microscopy (AFM) contact mode analysis was performed to measure nano-adhesion forces and surface energies between excipient-drug particles (6-10 different particles per each pair). Moreover, surface topography images (100 nm2–10 µm2) and roughness data were acquired from AFM tapping mode. AFM data were related to ODT macro/microscopic properties obtained from SEM, FTIR, XRD, thermal analysis using DSC and TGA, disintegration testing, Heckel and tabletability profiles. The study results showed a good association between the adhesive molecular and physical forces of paired particles and the resultant densification mechanisms responsible for mechanical strength of tablets. MCC micro roughness was 3 times that of D-mannitol which explains the high hardness of MCC ODTs due to mechanical interlocking. Hydrogen bonding between MCC particles could not be established from both AFM and FTIR solid state investigation. On the contrary, D-mannitol produced fragile ODTs due to fragmentation of surface crystallites during compression attained from its weak crystal structure. Furthermore, AFM analysis has shown the presence of extensive micro fibril structures inhabiting nano pores which further supports the use of MCC as a disintegrant. Overall, excipients (and model drugs) showed mechanistic behaviour on the nano/micro scale that could be related to the functionality of materials on the macro scale. PMID:25025427

  14. Characterization of cellulose biomass for use as an excipient in pharmaceutical field

    International Nuclear Information System (INIS)

    Garcia, Keth R.; Turella, Tais C.; Santos, Venina dos; Brandalise, Rosmary N.; Angeli, Valeria W.

    2015-01-01

    Every day the industry of paper and cellulose discards large amounts of waste. An alternative to reuse this kind of biomass is to transform part of it in cellulose nanocrystals and nanofibrils to be used as excipients in pharmaceutical field. Thus, cellulose fibrils were obtained in nanoscale using mill and fibrils' characterization study were performed by scanning electron microscopy, transmission electron microscopy, thermal analysis, differential scanning calorimetry, infrared Fourier transform and X-rays diffraction. Hence, the methodology used to obtain and characterize nanocellulose was effective and the fibers/fibrils lengths are in nanometer dimension with high potential to apply in the pharmaceutical field. (author)

  15. Recommendations and interventions to decrease physical inactivity at work

    NARCIS (Netherlands)

    Commissaris, D.; Douwes, M.

    2014-01-01

    Many contemporary work tasks, e.g. at an office workplace, are characterised by physical inactivity and by long periods of uninterrupted sitting. These characteristics increase the risk of several health problems, among others obesity, cardiovascular disorders, diabetes, cancer, musculoskeletal

  16. Impact of inactivity and exercise on the vasculature in humans.

    Science.gov (United States)

    Thijssen, Dick H J; Maiorana, Andrew J; O'Driscoll, Gerry; Cable, Nigel T; Hopman, Maria T E; Green, Daniel J

    2010-03-01

    The effects of inactivity and exercise training on established and novel cardiovascular risk factors are relatively modest and do not account for the impact of inactivity and exercise on vascular risk. We examine evidence that inactivity and exercise have direct effects on both vasculature function and structure in humans. Physical deconditioning is associated with enhanced vasoconstrictor tone and has profound and rapid effects on arterial remodelling in both large and smaller arteries. Evidence for an effect of deconditioning on vasodilator function is less consistent. Studies of the impact of exercise training suggest that both functional and structural remodelling adaptations occur and that the magnitude and time-course of these changes depends upon training duration and intensity and the vessel beds involved. Inactivity and exercise have direct "vascular deconditioning and conditioning" effects which likely modify cardiovascular risk.

  17. Chronic recreational physical inactivity and epithelial ovarian cancer risk

    DEFF Research Database (Denmark)

    Cannioto, Rikki; LaMonte, Michael J.; Risch, Harvey A

    2016-01-01

    , weekly recreational physical activity were classified as inactive. Multivariable logistic regression was utilized to estimate the ORs and 95% confidence intervals (CI) for the association between inactivity and EOC risk overall and by subgroups based upon histotype, menopausal status, race, and body mass......Background: Despite a large body of literature evaluating the association between recreational physical activity and epithelial ovarian cancer (EOC) risk, the extant evidence is inconclusive, and little is known about the independent association between recreational physical inactivity and EOC risk....... We conducted a pooled analysis of nine studies from the Ovarian Cancer Association Consortium to investigate the association between chronic recreational physical inactivity and EOC risk. Methods: In accordance with the 2008 Physical Activity Guidelines for Americans, women reporting no regular...

  18. Cinnamon: Mystic powers of a minute ingredient

    Science.gov (United States)

    Kawatra, Pallavi; Rajagopalan, Rathai

    2015-01-01

    Cinnamon, due to its exotic flavor and aroma, is a key ingredient in the kitchen of every household. From the beginning of its use in 2800 BC by our ancestors for various purposes such as anointment, embalming and various ailments, it has instigated the interest of many researchers. Recently many trials have explored the beneficial effects of cinnamon in Parkinsons, diabetes, blood, and brain. After extensive research on PubMed and Google scholar, data were collected regarding its antioxidant, anti-inflammatory, antilipemic, antidiabetic, antimicrobial, and anticancer effect. This systematic review underlines the surplus health benefits of this clandestine ingredient and the scope of further research in these clinical scenarios. PMID:26109781

  19. The effect of excipients on the release kinetics of diclofenac sodium and papaverine hydrochloride from composed tablets.

    Science.gov (United States)

    Kasperek, Regina; Trebacz, Hanna; Zimmer, Łukasz; Poleszak, Ewa

    2014-01-01

    For increased analgesic effect, new composed tablets containing diclofenac sodium (DIC) with an addition of papaverine hydrochloride (PAP) were prepared to investigate the mechanism of release of the active substances from tablets with different excipients in eight different formulations. To detect the possible interactions between active substances and excipients differential scanning calorimetry (DSC) was used. A shift of the melting point and enthalpy values of the physical mixtures of tablets components suggested a kind of interaction between components in certain formulations, however, the tabletting process was not disturbed in any of them. Kinetics of drug release from formulations was estimated by zero order, first order and Higuchi and Korsmeyer-Peppas models using results of dissolution of DIC and PAP from tablets. The study revealed that the mechanism of release of active substances was dependent on the excipients contained in tablets and the best fitted kinetics models were obtained for formulations with potentially prolonged release of DIC and PAP.

  20. PROFILE OF PHYSICAL INACTIVITY AS A RISK FACTOR

    OpenAIRE

    Sanjay; Ram C; Abhay; Vasant

    2014-01-01

    BACKGROUND: Eighty-five percent of the global burden of Non Communicable Diseases (NCD) is borne by the low and middle income countries, like India development. Emergence of NCDs in India is identified by WHO, ICMR and Government of India. NCDs share common risk factors like physical inactivity are causing 3.2 million deaths annually in the world (WHO, 2014). AIMS: Aim was to study profile of physical inactivity for non-communicable diseases. METHODS AND MATERIALS: SET...

  1. Detection of compatibility between baclofen and excipients with aid of infrared spectroscopy and chemometry.

    Science.gov (United States)

    Rojek, Barbara; Wesolowski, Marek; Suchacz, Bogdan

    2013-12-01

    In the paper infrared (IR) spectroscopy and multivariate exploration techniques: principal component analysis (PCA) and cluster analysis (CA) were applied as supportive methods for the detection of physicochemical incompatibilities between baclofen and excipients. In the course of research, the most useful rotational strategy in PCA proved to be varimax normalized, while in CA Ward's hierarchical agglomeration with Euclidean distance measure enabled to yield the most interpretable results. Chemometrical calculations confirmed the suitability of PCA and CA as the auxiliary methods for interpretation of infrared spectra in order to recognize whether compatibilities or incompatibilities between active substance and excipients occur. On the basis of IR spectra and the results of PCA and CA it was possible to demonstrate that the presence of lactose, β-cyclodextrin and meglumine in binary mixtures produce interactions with baclofen. The results were verified using differential scanning calorimetry, differential thermal analysis, thermogravimetry/differential thermogravimetry and X-ray powder diffraction analyses. Copyright © 2013 Elsevier B.V. All rights reserved.

  2. Effects of excipients and formulation types on compressional properties of diclofenac.

    Science.gov (United States)

    Ayorinde, John Oluwasogo; Itiola, Adelanwa Oludele; Odeniyi, Michael Ayodele

    2013-01-01

    Different models used to characterize powders have not been extended to granule behavior in tablet technology. Hence, Kawakaita equation and tapping experiments were used to compare the effect of different excipients on the properties of powders and granules in diclofenac formulations containing corn starch (DCS), lactose (DL) and dicalcium phosphate (DDCP). The binding properties of Albizia gum from Albizia zygia tree were also compared with those of gelatin in the granule formulations. Diclofenac (powder and granule) formulations were characterized for particle size and particle size distribution. Volume reduction was done by subjecting materials to N number of taps. Values of maximum volume reduction (a 'determined') and index of compressibility (b) were obtained from the plots of N/C against powder volume reduction with tapping (C). Another value for a (a' calculated) were obtained from Kawakita equations. The individual and interaction effects of type of diluent (X1) and formulation (X2) on the characteristics of powder and granule were determined, using a 22 factorial experimental design. The mean granule size increased with binder concentration, larger granules were obtained with Albizia gum than gelatin in the formulations. In DCS, a was lower in granules, granules had higher values of a than powders in DDCP (p Diclofenac had higher compressibility index (b) with the excipients. Generally, b was higher in granules than in powder formulations (p properties. Granules and powders can be characterized using the same parameters. Albizia gum was shown to confer good flow and compression properties in diclofenac formulations.

  3. The relationship between drained angle and flow rate of size fractions of powder excipients.

    Science.gov (United States)

    Sklubalová, Z; Zatloukal, Z

    2009-12-01

    The influence of powder size of chosen pharmaceutical powder excipients on drained angle as well as the correlation between drained angle and the mass flow rate of certain powder size fractions were investigated in this work. A method of the indirect estimation of the three-dimensional drained angle from the mass of the residual powder was used experimentally to study the influence of powder size fractions in range of 0.200-0.630 mm for sodium chloride, sodium citrate, potassium chloride, and potassium citrate. Failures of flow significantly increased the drained angles for powder size fraction of 0.200-0.250 mm. For the uniformly flowable powder size fraction of 0.400-0.500 mm, the faster the flow rate, the smaller drained angles were observed for excipients investigated. To estimate parameters of the flow equation, the measurement of material flow rates from the hopper of different orifice sizes is needed, while the estimation of drained angle is much easier needing only one hopper. Finally, the increase of the hopper wall angle of the standard conical hopper to 70 degrees could be recommended to achieve uniform mass flow and to reduce the adverse effect of powder gliding along the hopper walls.

  4. Simultaneous Quantification of Three Polymorphic Forms of Carbamazepine in the Presence of Excipients Using Raman Spectroscopy

    Directory of Open Access Journals (Sweden)

    Marco Farias

    2014-09-01

    Full Text Available The occurrence of polymorphic transitions is a serious problem for pharmaceutical companies, because it can affect the bioavailability of the final product. With several known polymorphic forms carbamazepine is one of the most problematic drugs in this respect. Raman spectroscopy is a vibrational technique that is becoming very important in the pharmaceutical field, mainly due to its highly specific molecular fingerprint capabilities and easy use as a process analytical tool. However, multivariate methods are necessary both for identification and quantification. In this work an analytical methodology using Raman spectroscopy and interval Partial Least Squares Regression (iPLS, was developed in order to quantify mixtures of carbamazepine polymorphs in the presence of the most common excipients. The three polymorphs CBZ I, CBZ III and CBZ DH (which is a dihydrate were synthesized and characterized by PXRD and DSC. Subsequently, tablets were manufactured using excipients and 15 different mixtures of carbamazepine polymorphs. The iPLS model presented average prediction validation errors of 1.58%, 1.04% and 0.22% wt/wt, for CBZ I, CBZ III and CBZ DH, respectively, considering the whole mass of the tablet. The model presents a good prediction capacity and the proposed methodology could be used to perform quality control in final products.

  5. Development of lyophilization cycle and effect of excipients on the stability of catalase during lyophilization

    Science.gov (United States)

    Lale, Shantanu V; Goyal, Monu; Bansal, Arvind K

    2011-01-01

    Introduction: The purpose of the present study was to screen excipients such as amino acids and non-aqueous solvents for their stabilizing effect on catalase, a model protein, for lyophilization. The present study also includes optimization of lyophilization cycle for catalase formulations, which is essential from the commercial point of view, since lyophilization is an extremely costly process. Materials and Methods: Activity of catalase was determined using catalase activity assay. Differential scanning calorimetry was used to determine eutectic melting temperature of the frozen catalase solution, which is essential for the optimization of lyophilization cycle. Results: When catalase was lyophilized without excipients, it was found that about 65-78% of the initial activity of catalase was lost during the lyophilization process in a concentration dependent manner. The maximum stability of catalase during lyophilization was observed at pH 7.0. Amino acids like alanine, glycine, lysine, serine and 4-hydroxy proline showed strong stabilizing effect on catalase during lyophilization by protecting catalase activity above 95%, whereas valine and cysteine hydrochloride showed destabilizing effect on catalase. Non-aqueous solvents such as dimethyl formamide, dimethyl sulphoxide, polyethylene glycol (PEG) 200, PEG 400, PEG 600 and ethylene glycol also showed destabilizing effect on catalase during lyophilization. Conclusions: In order to prevent loss of catalase activity during lyophilization of catalase, use of amino acids like alanine, glycine, lysine, serine and 4-hydroxy proline in optimum concentration is highly advisable. PMID:23071946

  6. Correlation between calculated molecular descriptors of excipient amino acids and experimentally observed thermal stability of lysozyme.

    Science.gov (United States)

    Meng-Lund, Helena; Friis, Natascha; van de Weert, Marco; Rantanen, Jukka; Poso, Antti; Grohganz, Holger; Jorgensen, Lene

    2017-05-15

    A quantitative structure-property relationship (QSPR) between protein stability and the physicochemical properties of excipients was investigated to enable a more rational choice of stabilizing excipients than prior knowledge. The thermal transition temperature and aggregation time were determined for lysozyme in combination with 13 different amino acids using high throughput fluorescence spectroscopy and kinetic static light scattering measurements. On the theoretical side, around 200 2D and 3D molecular descriptors were calculated based on the amino acids' chemical structure. Multivariate data analysis was applied to correlate the descriptors with the experimental results. It was possible to identify descriptors, i.e. amino acids properties, with a positive influence on either transition temperature or aggregation onset time, or both. A high number of hydrogen bond acceptor moieties was the most prominent stabilizing factor for both responses, whereas hydrophilic surface properties and high molecular mass density mostly had a positive influence on the unfolding temperature. A high partition coefficient (logP(o/w)) was identified as the most prominent destabilizing factor for both responses. The QSPR shows good correlation between calculated molecular descriptors and the measured stabilizing effect of amino acids on lysozyme. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Overview on zein protein: a promising pharmaceutical excipient in drug delivery systems and tissue engineering.

    Science.gov (United States)

    Labib, Gihan

    2018-01-01

    Natural pharmaceutical excipients have been applied extensively in the past decades owing to their safety and biocompatibility. Zein, a natural protein of plant origin offers great benefit over other synthetic polymers used in controlled drug and biomedical delivery systems. It was used in a variety of medical fields including pharmaceutical and biomedical drug targeting, vaccine, tissue engineering, and gene delivery. Being biodegradable and biocompatible, the current review focuses on the history and the medical application of zein as an attractive still promising biopolymer. Areas covered: The current review gives a broadscope on zein as a still promising protein excipient in different fields. Zein- based drug and biomedical delivery systems are discussed with special focus on current and potential application in controlled drug delivery systems, and tissue engineering. Expert opinion: Zein as a protein of natural origin can still be considered a promising polymer in the field of drug delivery systems as well as in tissue engineering. Although different researchers spotted light on zein application in different industrial fields extensively, the feasibility of its use in the field of drug delivery replenished by investigators in recent years has not yet been fully approached.

  8. Evaluation of Chitosan-Microcrystalline Cellulose Blends as Direct Compression Excipients

    Directory of Open Access Journals (Sweden)

    Emmanuel O. Olorunsola

    2017-01-01

    Full Text Available This study was aimed at evaluating chitosan-microcrystalline cellulose blends as direct compression excipients. Crab shell chitosan, α-lactose monohydrate, and microcrystalline cellulose powders were characterized. Blends of the microcrystalline cellulose and chitosan in ratios 9 : 1, 4 : 1, 2 : 1, and 1 : 1 as direct compression excipients were made to constitute 60% of metronidazole tablets. Similar tablets containing blends of the microcrystalline cellulose and α-lactose monohydrate as well as those containing pure microcrystalline cellulose were also produced. The compact density, tensile strength, porosity, disintegration time, and dissolution rate of tablets were determined. Chitosan had higher moisture content (7.66% and higher moisture sorption capacity (1.33% compared to microcrystalline cellulose and lactose. It also showed better flow properties (Carr’s index of 18.9% and Hausner’s ratio of 1.23. Compact density of tablets increased but tensile strength decreased with increase in the proportion of chitosan in the binary mixtures. In contrast to lactose, the disintegration time increased and the dissolution rate decreased with increase in the proportion of chitosan. This study has shown that chitosan promotes flowability of powder mix and rapid disintegration of tablet. However, incorporation of equal proportions of microcrystalline cellulose and chitosan leads to production of extended-release tablet. Therefore, chitosan promotes tablet disintegration at low concentration and enables extended-release at higher concentration.

  9. 7 CFR 58.718 - Flavor ingredients.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Flavor ingredients. 58.718 Section 58.718 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE...

  10. 21 CFR 106.20 - Ingredient control.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Ingredient control. 106.20 Section 106.20 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION INFANT FORMULA QUALITY CONTROL PROCEDURES Quality Control Procedures for Assuring Nutrient Content...

  11. 9 CFR 381.118 - Ingredients statement.

    Science.gov (United States)

    2010-01-01

    ...) Establishments may interchange the identity of two kinds of poultry (e.g., chicken and turkey, chicken meat and turkey meat) used in a product formulation without changing the product's ingredient statement or product... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY...

  12. What are the "ingredients" for economic growth?

    OpenAIRE

    Wolla, Scott A.

    2013-01-01

    Is there a recipe for economic growth? Perhaps some Miracle-Gro for the economy? If only it were that easy. While the exact recipe is a mystery, economists have identified some of the key ingredients. This month’s newsletter discusses the role that economic institutions play in fostering long-term economic growth.

  13. USDA dietary supplement ingredient database, release 2

    Science.gov (United States)

    The Nutrient Data Laboratory (NDL),Beltsville Human Nutrition Research Center (BHNRC), Agricultural Research Service (ARS), USDA, in collaboration with the Office of Dietary Supplements, National Institutes of Health (ODS/NIH) and other federal agencies has developed a Dietary Supplement Ingredient ...

  14. 7 CFR 58.520 - Nondairy ingredients.

    Science.gov (United States)

    2010-01-01

    ... ingredients such as fruits, nuts, chives or other vegetables used or blended with cottage cheese shall be... cottage cheese may first be soaked for 15 to 20 minutes in a cold 25 to 50 ppm chlorine solution to appreciably reduce the bacterial population. After soaking, the vegetables shall be drained and used soon...

  15. Experiential versus genetic accounts of inactivity: implications for inactive individuals' self-efficacy beliefs and intentions to exercise.

    Science.gov (United States)

    Beauchamp, Mark R; Rhodes, Ryan E; Kreutzer, Christiane; Rupert, James L

    2011-01-01

    The overall purpose of this study was to examine the effect of deterministic media reports, linking genetics to inactivity, in relation to inactive people's social cognitions concerning physical activity involvement. Sixty three inactive university students were randomly allocated to one of three experimental conditions (control, genetically-primed, experientially-primed) and completed measures of instrumental and affective attitudes, subjective norms, self-efficacy, and exercise intentions. One week later participants in the two experimental conditions were provided with a bogus newspaper report that either reflected a genetic explanation for physical inactivity or an experiential basis for inactivity. Shortly afterwards, participants in all three conditions completed the same measures as at pre-test. The results revealed that after controlling for baseline measures participants in the experientially-primed condition reported significantly higher levels of self-efficacy and intentions to exercise than those in the genetically-primed condition. These findings raise a cautionary flag concerning the presentation of genetic research in the media, especially with regard to inactive populations.

  16. Prevalence and factors associated with physical inactivity among Malaysian adults.

    Science.gov (United States)

    Ying, Chanying; Kuay, Lim Kuang; Huey, Teh Chien; Hock, Lim Kuang; Hamid, Hamizatul Akmal Abd; Omar, Mohd Azahadi; Ahmad, Noor Ani; Cheong, Kee Chee

    2014-03-01

    Using data from the Third National Health and Morbidity Survey (NHMS III) in 2006, this study examined the association between socio-demographic factors and physical inactivity in a sample of 33,949 adults aged 18 years and above by gender. Physical activity levels were measured using the Global Physical Activity Questionnaire (GPAQ vers 1). Physical inactivity was defined as having a total physical activity level of less than 600 metabolic equivalents-minutes per week (METs-minutes/week) contributed by all three different life domains.Logistic regression analyses were conducted.The prevalence of overall physical inactivity was 43.7% (95% CI: 42.9-44.5). The mean total physical activity level was 894.2 METs-minutes/ week. The means METs-minutes/week for the domain of work, travelling, and leisure time were 518.4, 288.1, and 134.8, respectively. Multivariable logistic regression analyses indicated that females were more likely to be physically inactive than males were (aOR=1.62; 95% CI: 1.53-1.72). Among women, being a housewife (aOR = 1.78; 95% CI: 1.56-2.03), widow/divorcee (aOR = 1.23; 95% CI: 1.05-1.43), and those with no formal education (aOR = 1.20; 95% CI: 1.01-1.43) were found to be significantly associated with physical inactivity.Urban residents, older adults aged 65 years and above, private employees, nonworking group, and those with a monthly household income level of MYR5,000 and above appeared to be consistently associated with physical inactivity across men, women, and combined group (both). Specific health intervention strategies to promote physical activity should be targeted on population subgroups who are inactive.

  17. The influence of co-formers on the dissolution rates of co-amorphous sulfamerazine/excipient systems

    DEFF Research Database (Denmark)

    Gniado, Katarzyna; Löbmann, Korbinian; Rades, Thomas

    2016-01-01

    A comprehensive study on the dissolution properties of three co-amorphous sulfamerazine/excipient systems, namely sulfamerazine/deoxycholic acid, sulfamerazine/citric acid and sulfamerazine/sodium taurocholate (SMZ/DA, SMZ/CA and SMZ/NaTC; 1:1 molar ratio), is reported. While all three co...

  18. Significance of excipients to enhance the bioavailability of poorly water-soluble drugs in oral solid dosage forms: A Review

    Science.gov (United States)

    Vadlamudi, Manoj Kumar; Dhanaraj, Sangeetha

    2017-11-01

    Nowadays most of the drug substances are coming into the innovation pipeline with poor water solubility. Here, the influence of excipients will play a significant role to improve the dissolution of poorly aqueous soluble compounds. The drug substance needs to be dissolved in gastric fluids to get the better absorption and bioavailability of an orally administered drug. Dissolution is the rate-controlling stage for drugs which controls the rate and degree of absorption. Usually, poorly soluble oral administrated drugs show a slower dissolution rate, inconsistent and incomplete absorption which can lead to lower bioavailability. The low aqueous solubility of BCS class II and IV drugs is a major challenge in the drug development and delivery process. Several technologies have been used in an attempt to progress the bioavailability of poorly water-soluble drug compounds which include solid dispersions, lipid-based formulations, micronization, solvent evaporation, co-precipitation, ordered mixing, liquid-solid compacts, solvent deposition inclusion complexation, and steam aided granulation. In fact, most of the technologies require excipient as a carrier which plays a significant role in improving the bioavailability using Hypromellose acetate succinate, Cyclodextrin, Povidone, Copovidone, Hydroxypropyl cellulose, Hydroxypropyl methylcellulose, Crospovidone, Starch, Dimethylacetamide, Polyethylene glycol, Sodium lauryl sulfate, Polysorbate, Poloxamer. Mesoporous silica and so on. This review deliberates about the excipients significance on bioavailability enhancement of drug products in a single platform along with pragmatically proved applications so that user can able to select the right excipients as per the molecule.

  19. Using different experimental designs in drug-excipient compatibility studies during the preformulation development of a stable solid dosage formulation.

    Science.gov (United States)

    Bohanec, Simona; Peterka, Tanja Rozman; Blažič, Petra; Jurečič, Rok; Grmaš, Jernej; Krivec, Aleksandra; Zakrajšek, Jure

    2010-12-01

    Different types of factorial experimental designs can be used in compatibility studies of drug development, where many different factors and their interactions should be evaluated to predict their effects on the degradation of the drug substance under study. All possible main and interaction effects of different potential excipients that can constitute the drug product should be evaluated in order to select the best combination of excipients that give the lowest possible degradation, i.e., the most stable drug product. Statistical experimental designs enable the user to obtain the maximum amount of information, i.e., the degradation effects of excipients and their interactions on the stability of the drug substance, on the basis of the smallest possible number of experiments. The use of full and two different fractional factorial designs is described using a real example where the excipients that stabilize the drug substance or cause as little degradation as possible are selected for a solid dosage formulation. It was shown that the type and the sequence of design used during the studies are also important to get reliable and valuable results. A thorough explanation of the statistical evaluation of data and different presentations of final solutions are given.

  20. High-throughput assessment of antigen conformational stability by ultraviolet absorption spectroscopy and its application to excipient screening.

    Science.gov (United States)

    Dasnoy, Sébastien; Le Bras, Vivien; Préat, Véronique; Lemoine, Dominique

    2012-02-01

    In high-throughput screening (HTS) assays, the use of ultraviolet absorption spectroscopy (UA) is commonly limited to concentration and turbidity measurements. Our aim was to evaluate microplate-based UA and its second-derivative [(2d)UA] for measuring the conformational stability of two recombinant antigenic proteins in the presence of 44 excipients. Protein conformational stability was assessed by (2d)UA upon titration with guanidine hydrochloride. (2d)UA was compared with tryptophan fluorescence spectroscopy (TF) and differential scanning fluorimetry (DSF), both commonly used techniques for measuring protein conformational stability. The HTS data were corrected for plate, row and column effects by applying a median polish procedure. Irrespective of the unfolding method applied, similar stabilizing excipients were identified by all analytical methods for a given antigen. The native forms of both antigens were destabilized by arginine, hydroxypropyl-β-cyclodextrin, and sodium docusate, and were protected by polyols. The median polish correction improved the quality of the prediction models and the screening resolution. The higher sensitivities of TF and DSF compared with (2d)UA allowed the identification of a larger number of stabilizing excipients. However, similar screening resolutions (z'-factor > 0.8) were observed for 2dUA, TF, and DSF in a HTS of excipients applied to one of the antigens. Therefore, (2d)UA deserves more attention in HTS studies focused on protein conformational stability. Copyright © 2011 Wiley Periodicals, Inc.

  1. Inactive Doses and Protein Concentration of Gamma Irradiated Yersinia Enterocolitica

    International Nuclear Information System (INIS)

    Irawan Sugoro; Sandra Hermanto

    2009-01-01

    Yersinia enterocolitica is one of bacteria which cause coliform mastitis in dairy cows. The bacteria could be inactivated by gamma irradiation as inactivated vaccine candidate. The experiment has been conducted to determine the inactive doses and the protein concentration of Yersinia enterocolitica Y3 which has been irradiated by gamma rays. The cells cultures were irradiated by gamma rays with doses of 0, 100, 200, 400, 600, 800, 1.000 and 1.500 Gy (doses rate was 1089,59 Gy/hours). The inactive dose was determined by the drop test method and the protein concentration of cells were determined by Lowry method. The results showed that the inactive doses occurred on 800 – 1500 Gy. The different irradiation doses of cell cultures showed the effect of gamma irradiation on the protein concentration that was random and has a significant effect on the protein concentration. (author)

  2. Assessing compliance: Active versus inactive trainees in a memory intervention

    Directory of Open Access Journals (Sweden)

    Dana K Bagwell

    2008-06-01

    Full Text Available Dana K Bagwell, Robin L WestDepartment of Psychology, University of Florida, Gainesville, FL, USAAbstract: Extensive research on memory interventions has confirmed their success with older adults, but the individual difference factors that predict successful training outcomes remain relatively unexplored. In the current intervention, trainees were identified as active (compliant with training regimens or inactive using trainer ratings based on attendance, homework completion, and class participation. The active group showed significantly greater training-related gains than the inactive group and the control group on most measures. Compliance was predicted by health, education, and self-efficacy. Specifically, active trainees were more likely to have advanced degrees and somewhat higher self-efficacy, and to have higher vitality and fewer functional limitations than the inactive trainees. This research may assist future investigators to target interventions to those who will show the most benefit.Keywords: compliance, memory training, aging, intervention

  3. Environmental condition and impact of inactive uranium mines

    International Nuclear Information System (INIS)

    Hans, J.M. Jr.; Eadie, G.E.; O'Connell, M.F.

    1981-01-01

    The US Environmental Protection Agency (EPA) was required to provide a report to Congress identifying the location, and potential health, safety and environmental hazards of uranium mine wastes together with recommendations, if any, for a program to eliminate the hazards. The approach taken to prepare this report was to develop model active and inactive mines and locate them in a typical mining area to estimate their environmental impact. The inactive mines were separated from the list and sorted into surface and underground categories. A literature search was conducted to obtain and consolidate available information concerning the environmental aspects of uranium mining and short-term field surveys and studies were conducted to augment this information base. Radioactivity emission rates were measured or estimated for each mining category and were entered into computer codes to assess population exposures and subsequent health risks. The general environmental condition of inactive uranium mines was determined by walk-through surveys in several mining areas

  4. A model for predicting Inactivity in the European Banking Sector

    Directory of Open Access Journals (Sweden)

    Themistokles Lazarides

    2015-08-01

    Full Text Available Purpose – The paper will addresses the issue of inactivity and will try to detect its causes using econometric models. The Banking sector of Europe has been under transformation or restructuring for almost half a century. Design/methodology/approach – Probit models and descriptive statistics have been used to create a system that predicts inactivity. The data was collected from Bankscope. Findings – The results of the econometric models show that from the six groups of indicators, four have been found to be statistically important (performance, size, ownership, corporate governance. These findings are consistent with the theory. Research limitations/implications – The limitation is that Bankscope does not provide any longitudinal data regarding ownership, management structure and there are some many missing values before 2007 for some of the financial ratios and data. Originality/value – The paper's value and innovation is that it has given a systemic approach to find indicators of inactivity.

  5. Amino acids as co-amorphous excipients for simvastatin and glibenclamide

    DEFF Research Database (Denmark)

    Laitinen, Riikka; Löbmann, Korbinian; Grohganz, Holger

    2014-01-01

    to a few drugs and amino acids. To facilitate the rational selection of amino acids, the practical importance of the amino acid coming from the biological target site of the drug (and associated intermolecular interactions) needs to be established. In the present study, the formation of co......-amorphous systems using cryomilling and combinations of two poorly water-soluble drugs (simvastatin and glibenclamide) with the amino acids aspartic acid, lysine, serine, and threonine was investigated. Solid-state characterization with X-ray powder diffraction, differential scanning calorimetry, and Fourier...... in the mixtures. Interestingly, a favorable effect by the excipients on the tautomerism of amorphous glibenclamide in the co-amorphous blends was seen, as the formation of the thermodynamically less stable imidic acid tautomer of glibenclamide was suppressed compared to that of the pure amorphous drug...

  6. l-Cystine-Crosslinked Polypeptide Nanogel as a Reduction-Responsive Excipient for Prostate Cancer Chemotherapy

    Directory of Open Access Journals (Sweden)

    Liang He

    2016-01-01

    Full Text Available Smart polymer nanogel-assisted drug delivery systems have attracted more and more attention in cancer chemotherapy because of their well-defined morphologies and pleiotropic functions in recent years. In this work, an l-cystine-crosslinked reduction-responsive polypeptide nanogel of methoxy poly(ethylene glycol-poly(l-phenylalanine-co-l-cystine (mPEG-P(LP-co-LC was employed as a smart excipient for RM-1 prostate cancer (PCa chemotherapy. Doxorubicin (DOX, as a regular chemotherapy drug, was embedded in the nanogel. The loading nanogel marked as NG/DOX was shown to exhibit glutathione (GSH-induced swelling and GSH-accelerated DOX release. Subsequently, NG/DOX showed efficient cellular uptake and proliferation inhibition. Furthermore, NG/DOX presented enhanced antitumor efficacy and security in an RM-1 PCa-grafted mouse model in vivo, indicating its great potential for clinical treatment.

  7. Screening of polysaccharides from tamarind, fenugreek and jackfruit seeds as pharmaceutical excipients.

    Science.gov (United States)

    Nayak, Amit Kumar; Pal, Dilipkumar; Santra, Kousik

    2015-08-01

    The paper describes the isolation and screening of plant polysaccharides namely tamarind seed polysaccharide (TSP), fenugreek seed mucilage (FSM) and jackfruit seed starch (JFSS) from tamarind (Tamarindus indica L.) seeds, fenugreek (Trigonella foenum-graecum L.) seeds and jackfruit (Artocarpus heterophyllus L.) seeds, respectively. The yields of isolated dried TSP, FSM and JFSS were 47.00%, 17.36% and 18.86%, respectively. Various physicochemical properties like colour, odour, taste, solubility in water, pH and viscosity of these isolated plant polysaccharides were assessed. Isolated polysaccharide samples were subjected to some phytochemical identification tests. FTIR and (1)H NMR analyses of isolated polysaccharides were performed, which suggest the presence of sugar residues. Isolated TSP, FSM and JFSS can be used as pharmaceutical excipients in various pharmaceutical formulations. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Characterizing compaction-induced thermodynamic changes in a common pharmaceutical excipient.

    Science.gov (United States)

    Wurster, Dale Eric; Buckner, Ira S

    2012-08-01

    Work, heat, and internal energy change values were measured during compression of a common pharmaceutical tablet excipient, anhydrous lactose, using a compression calorimeter. Heat of solution measurements were used independently to measure the energy change caused by compaction. Both the compression calorimeter and the heat of solution measurements showed an increase in anhydrous lactose's energy state as a result of the net compression and decompression process. Excellent agreement between the energy change measured by compression calorimetry (0.94 J/g) and the energy change measured by solution calorimetry (0.91 J/g) strongly supports the data and results generated by the compression calorimeter. Furthermore, specific volume and specific surface area measurements were used to investigate the nature of the measured energy increase. The results indicate that the vast majority of the stored energy is most likely associated with residual strain within the compacted particles. Copyright © 2012 Wiley Periodicals, Inc.

  9. Safety and regulatory review of dyes commonly used as excipients in pharmaceutical and nutraceutical applications.

    Science.gov (United States)

    Pérez-Ibarbia, Leire; Majdanski, Tobias; Schubert, Stephanie; Windhab, Norbert; Schubert, Ulrich S

    2016-10-10

    Color selection is one of the key elements of building a strong brand development and product identity in the pharmaceutical industry, besides to prevent counterfeiting. Moreover, colored pharmaceutical dosage forms may increase patient compliance and therapy enhancement. Although most synthetic dyes are classified as safe, their regulations are stricter than other classes of excipients. Safety concerns have increased during the last years but the efforts to change to natural dyes seem to be not promising. Their instability problems and the development of "non-toxic" dyes is still a challenge. This review focuses specifically on the issues related to dye selection and summarizes the current regulatory status. A deep awareness of toxicological data based on the public domain, making sure the compliance of standards for regulation and safety for successful product development is provided. In addition, synthetic strategies are provided to covalently bind dyes on polymers to possibly overcome toxicity issues. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Dehydration of bacteriophages in electrospun nanofibers: effect of excipients in polymeric solutions

    Science.gov (United States)

    Koo, Charmaine K. W.; Senecal, Kris; Senecal, Andre; Nugen, Sam R.

    2016-12-01

    Bacteriophages are viruses capable of infecting and lysing target bacterial cells; as such they have potential applications in agriculture for decontamination of foods, food contact surfaces and food rinse water. Although bacteriophages can retain infectivity long-term using lyophilized storage, the process of freeze-drying can be time consuming and expensive. In this study, electrospinning was used for dehydrating bacteriophages in polyvinylpyrrolidone polymer solutions with addition of excipients (sodium chloride, magnesium sulfate, Tris-HCl, sucrose) in deionized water. The high voltage dehydration reduced the infectivity of bacteriophages following electrospinning, with the damaging effect abated with addition of storage media (SM) buffer and sucrose. SM buffer and sucrose also provided the most protection over extended storage (8 weeks; 20 °C 1% relative humidity) by mitigating environmental effects on the dried bacteriophages. Magnesium sulfate however provided the least protection due to coagulation effects of the ion, which can disrupt the native conformation of the bacteriophage protein coat. Storage temperatures (20 °C, 4 °C and -20 °C 1% relative humidity) had a minimal effect while relative humidity had substantial effect on the infectivity of bacteriophages. Nanofibers stored in higher relative humidity (33% and 75%) underwent considerable damage due to extensive water absorption and disruption of the fibers. Overall, following storage of nanofiber mats for eight weeks at ambient temperatures, high infective phage concentrations (106-107 PFU ml-1) were retained. Therefore, this study provided valuable insights on preservation and dehydration of bacteriophages by electrospinning in comparison to freeze drying and liquid storage, and the influence of excipients on the viability of bacteriophages.

  11. Influence of different excipients on the properties of hard gelatin capsules with metamizole sodium

    Directory of Open Access Journals (Sweden)

    Rogowska Magdalena

    2016-09-01

    Full Text Available Metamizole is an effective non-opioid analgesic drug used in the treatment of acute and chronic pain. Due to induced potentially life-threatening blood disorders, metamizole was withdrawn from market in many parts of the world, however, it is one of the most popular analgesics in Poland that is available as an over the counter drug. Patients tend to prefer capsules over tablets, as they are easier to swallow and taste better. The powder-filled capsules also have greater bioavailability and require less excipients, as compared to tablets. Polymic excipients are mainly used in capsule filling, and have influence upon the physico-chemical properties of the hard gelatin capsules and the powder formulation. The aim of the study was to determine whether various combinations of polymers impact the disintegration time and pharmaceutical availability of hard gelatin capsules with metamizole sodium. The results of our work demonstrated that the 80% of all active substance was released in all tested formulations within 15 minutes. Herein, the capsule containing lactose monohydrate had the longest release (4% after 2 min., while capsules containing mannitol had the fastest release (81.2% after 2 min.. Moreover, the addition of HPMC to capsules with lactose brought about a slight increase in the metamizole release rate, while the addition of PVP 30 to capsules with microcrystalline cellulose slightly accelerated release. This data suggests that the use of different polymers in capsules formulation brings about changes in the physical properties of powders and modifies the release profile of metamizole. In our study, the most preferred formulation was one containing microcrystalline cellulose (good powder properties and fairly fast release.

  12. A PAT-based qualification of pharmaceutical excipients produced by batch or continuous processing.

    Science.gov (United States)

    Hertrampf, A; Müller, H; Menezes, J C; Herdling, T

    2015-10-10

    Pharmaceutical excipients have an influence on the main requirements for medicinal products (viz., quality, safety and efficacy) but also on their manufacturability. During product lifecycle it may become necessary to introduce minor changes (e.g., to continuously improve it) or major changes in the validated process (e.g., moving it to a new production site, replacing process version or even disruptively changing processing type). Those changes can influence the critical to quality attributes of the product. Therefore, it is important to enhance process understanding to avoid the risk of any significant quality changes. Process analytical technology can support better decision making and risk-management as required in quality by design - viz., by many pharmaceutical regulatory authorities. This study compares the quality of the pharmaceutical excipient sodium carbonate (anhydrous) produced either in a batch or a continuous process. For continuous processing two different production lines were available that differed on the dryer and crystallizer types used. Therefore their influence on critical to quality attributes of sodium carbonate was investigated for each of the three processing alternatives. The overall goal was to identify which of the continuous processes ensures a similar product quality to batch processing. Namely, changes on chemical and physical attributes of the product were investigated with Raman spectroscopy, laser diffraction and X-ray powder diffraction. Principal component analysis, a very common multivariate analysis technique, was applied to extract relevant information from small differences at multiple spectral regions from samples from each process type and from each analytical technique used. Changing processing from batch to continuous improved consistency of certain attributes (e.g., particle size distribution) but affected others. However, the increased process/product knowledge gained can lead to an enhanced control strategy and

  13. Fragranced consumer products: Chemicals emitted, ingredients unlisted

    International Nuclear Information System (INIS)

    Steinemann, Anne C.; MacGregor, Ian C.; Gordon, Sydney M.; Gallagher, Lisa G.; Davis, Amy L.; Ribeiro, Daniel S.; Wallace, Lance A.

    2011-01-01

    Fragranced consumer products are pervasive in society. Relatively little is known about the composition of these products, due to lack of prior study, complexity of formulations, and limitations and protections on ingredient disclosure in the U.S. We investigated volatile organic compounds (VOCs) emitted from 25 common fragranced consumer products-laundry products, personal care products, cleaning supplies, and air fresheners-using headspace analysis with gas chromatography/mass spectrometry (GC/MS). Our analysis found 133 different VOCs emitted from the 25 products, with an average of 17 VOCs per product. Of these 133 VOCs, 24 are classified as toxic or hazardous under U.S. federal laws, and each product emitted at least one of these compounds. For 'green' products, emissions of these compounds were not significantly different from the other products. Of all VOCs identified across the products, only 1 was listed on any product label, and only 2 were listed on any material safety data sheet (MSDS). While virtually none of the chemicals identified were listed, this nonetheless accords with U.S. regulations, which do not require disclosure of all ingredients in a consumer product, or of any ingredients in a mixture called 'fragrance.' Because the analysis focused on compounds emitted and listed, rather than exposures and effects, it makes no claims regarding possible risks from product use. Results of this study contribute to understanding emissions from common products, and their links with labeling and legislation.

  14. Oil Dispersion with Abamectin as Active Ingredient

    Directory of Open Access Journals (Sweden)

    Slavica Gašić

    2011-01-01

    Full Text Available Abamectin was developed as an insecticide, nematocide and acaricide for use on a varietyof agricultural and horticultural crops. The products with this active ingredient can befound on the market mostly formulated as emulsifiable concentrate (EC. Usually producersrecommend using the EC formulation of abamectin together with some kind of adjuvants(natural oils to improve efficacy of the active ingredient. To overcome the efficacy problemwe tried to formulate the active ingredient abamectin as oil dispersion (OD. Oil dispersion,preferably based on naturally derived oils could improve pesticide efficacy. This type of pesticideformulation contains oil instead of water as in classical suspension concentrate andtypically has better retention and coverage. In the case of abamectin, in this investigationsoybean oil was used with the mixture of different nonionic emulsifiers. Content of abamecetinin formulation was 1.8 %. The developed formulation was tested for few importantparameters. The obtained physicochemical properties for the above mentioned formulationhave shown that it is stable and could be used in plant protection.

  15. Effective Active Ingredients Obtained through Biotechnology

    Directory of Open Access Journals (Sweden)

    Claudia Zappelli

    2016-11-01

    Full Text Available The history of cosmetics develops in parallel to the history of man, associated with fishing, hunting, and superstition in the beginning, and later with medicine and pharmacy. Over the ages, together with human progress, cosmetics have changed continuously and nowadays the cosmetic market is global and highly competitive, where terms such as quality, efficacy and safety are essential. Consumers’ demands are extremely sophisticated, and thus scientific research and product development have become vital to meet them. Moreover, consumers are aware about environmental and sustainability issues, and thus not harming the environment represents a key consideration when developing a new cosmetic ingredient. The latest tendencies of cosmetics are based on advanced research into how to interfere with skin cell aging: research includes the use of biotechnology-derived ingredients and the analysis of their effects on the biology of the cells, in terms of gene regulation, protein expression and enzymatic activity measures. In this review, we will provide some examples of cosmetic active ingredients developed through biotechnological systems, whose activity on the skin has been scientifically proved through in vitro and clinical studies.

  16. Substrate Capture Assay Using Inactive Oligopeptidases to Identify Novel Peptides.

    Science.gov (United States)

    Rioli, Vanessa; Ferro, Emer S

    2018-01-01

    Researchers are always searching for novel biologically active molecules including peptides. With the improvement of equipment for electrospray mass spectrometry, it is now possible to identify hundreds of novel peptides in a single run. However, after identifying the peptide sequences it is expensive to synthesize all the peptides to perform biological activity assays. Here, we describe a substrate capture assay that uses inactive oligopeptidases to identify putative biologically active peptides in complexes peptide mixtures. This methodology can use any crude extracts of biological tissues or cells, with the advantage to introduce a filter (i.e., binding to an inactive oligopeptidase) as a prior step in screening to bioactive peptides.

  17. The economic benefits of reducing physical inactivity: an Australian example.

    Science.gov (United States)

    Cadilhac, Dominique A; Cumming, Toby B; Sheppard, Lauren; Pearce, Dora C; Carter, Rob; Magnus, Anne

    2011-09-24

    Physical inactivity has major impacts on health and productivity. Our aim was to estimate the health and economic benefits of reducing the prevalence of physical inactivity in the 2008 Australian adult population. The economic benefits were estimated as 'opportunity cost savings', which represent resources utilized in the treatment of preventable disease that are potentially available for re-direction to another purpose from fewer incident cases of disease occurring in communities. Simulation models were developed to show the effect of a 10% feasible, reduction target for physical inactivity from current Australian levels (70%). Lifetime cohort health benefits were estimated as fewer incident cases of inactivity-related diseases; deaths; and Disability Adjusted Life Years (DALYs) by age and sex. Opportunity costs were estimated as health sector cost impacts, as well as paid and unpaid production gains and leisure impacts from fewer disease events associated with reduced physical inactivity. Workforce production gains were estimated by comparing surveyed participation and absenteeism rates of physically active and inactive adults, and valued using the friction cost approach. The impact of an improvement in health status on unpaid household production and leisure time were modeled from time use survey data, as applied to the exposed and non-exposed population subgroups and valued by suitable proxy. Potential costs associated with interventions to increase physical activity were not included. Multivariable uncertainty analyses and univariate sensitivity analyses were undertaken to provide information on the strength of the conclusions. A 10% reduction in physical inactivity would result in 6,000 fewer incident cases of disease, 2,000 fewer deaths, 25,000 fewer DALYs and provide gains in working days (114,000), days of home-based production (180,000) while conferring a AUD96 million reduction in health sector costs. Lifetime potential opportunity cost savings in

  18. The economic benefits of reducing physical inactivity: an Australian example

    Directory of Open Access Journals (Sweden)

    Cumming Toby B

    2011-09-01

    Full Text Available Abstract Background Physical inactivity has major impacts on health and productivity. Our aim was to estimate the health and economic benefits of reducing the prevalence of physical inactivity in the 2008 Australian adult population. The economic benefits were estimated as 'opportunity cost savings', which represent resources utilized in the treatment of preventable disease that are potentially available for re-direction to another purpose from fewer incident cases of disease occurring in communities. Methods Simulation models were developed to show the effect of a 10% feasible, reduction target for physical inactivity from current Australian levels (70%. Lifetime cohort health benefits were estimated as fewer incident cases of inactivity-related diseases; deaths; and Disability Adjusted Life Years (DALYs by age and sex. Opportunity costs were estimated as health sector cost impacts, as well as paid and unpaid production gains and leisure impacts from fewer disease events associated with reduced physical inactivity. Workforce production gains were estimated by comparing surveyed participation and absenteeism rates of physically active and inactive adults, and valued using the friction cost approach. The impact of an improvement in health status on unpaid household production and leisure time were modeled from time use survey data, as applied to the exposed and non-exposed population subgroups and valued by suitable proxy. Potential costs associated with interventions to increase physical activity were not included. Multivariable uncertainty analyses and univariate sensitivity analyses were undertaken to provide information on the strength of the conclusions. Results A 10% reduction in physical inactivity would result in 6,000 fewer incident cases of disease, 2,000 fewer deaths, 25,000 fewer DALYs and provide gains in working days (114,000, days of home-based production (180,000 while conferring a AUD96 million reduction in health sector costs

  19. 21 CFR 346.12 - Vasoconstrictor active ingredients.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Vasoconstrictor active ingredients. 346.12 Section 346.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Vasoconstrictor active ingredients. The active ingredient of the product consists of any of the following when...

  20. 21 CFR 349.30 - Permitted combinations of active ingredients.

    Science.gov (United States)

    2010-04-01

    ... § 349.10 may be combined with any single ophthalmic vasoconstrictor active ingredient identified in... vasoconstrictor identified in § 349.18. (d) Any single ophthalmic astringent active ingredient identified in § 349.10 may be combined with any single ophthalmic vasoconstrictor active ingredient identified in § 349...

  1. 21 CFR 333.310 - Acne active ingredients.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Acne active ingredients. 333.310 Section 333.310... FOR HUMAN USE TOPICAL ANTIMICROBIAL DRUG PRODUCTS FOR OVER-THE-COUNTER HUMAN USE Topical Acne Drug Products § 333.310 Acne active ingredients. The active ingredient of the product consists of any of the...

  2. Condensational Growth of Combination Drug-Excipient Submicrometer Particles for Targeted High Efficiency Pulmonary Delivery: Evaluation of Formulation and Delivery Device

    Science.gov (United States)

    Hindle, Michael; Longest, P. Worth

    2012-01-01

    Objectives The objective of this study was to investigate the in vitro particle size growth of combination drug and excipient submicrometer aerosols generated from a series of formulations and two aerosol delivery devices. Methods Submicrometer combination drug and excipient particles were generated experimentally using both the capillary aerosol generator and the Respimat inhaler. Budesonide and albuterol sulfate were used as model drugs and were formulated with sodium chloride, citric acid, and mannitol as excipients in various ratios. Aerosol growth was evaluated in vitro in a coiled tube geometry designed to provide residence times and thermodynamic conditions consistent with the airways. Key Findings Submicrometer combination drug:excipient aerosols when exposed to simulated respiratory conditions increased to micrometer size suitable for pulmonary deposition. It was possible to control the aerosol growth ratio by altering: (1) the hygroscopic excipient, (2) the drug:excipient ratio and (3) the drug. The applicability of this approach was demonstrated using the capillary aerosol generator and the Respimat inhaler. Conclusions The enhanced excipient growth (EEG) approach may enable the delivery of submicrometer aerosol particles that increase in size within the airways and result in high percentages of pulmonary deposition. PMID:22881438

  3. Preparation and characterization of cross-linked excipient of coprocessed xanthan gum-acacia gum as matrix for sustained release tablets

    Science.gov (United States)

    Surini, Silvia; Wati, Dina Risma; Syahdi, Rezi Riadhi

    2018-02-01

    Sustained release tablet is solid dosage form which is designed to release drugs slowly in the body. This research was intended to prepare and characterize the cross-linked excipients of co-processed xanthan gum-acacia gum (CL-Co-XGGA) as matrices for sustained release tablets with gliclazide as a model drug. CL-Co-XGGA excipients were cross-linked materials of co-processed excipients of xanthan gum-acacia gum (Co-XGGA) using sodium trimetaphosphate. Co-processed excipients of xanthan gum-acacia gum were prepared in the ratio of each excipient 1:2, 1:1 and 2:1. Co-XGGA and CL-Co-XGGA excipients were characterized physically, chemically and functionally. Then, the sustained release (SR) tablets were formulated by wet granulation method using CL-Co-XGGA excipients as matrices. Also, the dissolution study of the gliclazide SR tablets was carried out in phosphate buffer medium pH 7,4 containing sodium lauryl sulphate 0.2% for 12 hours. The results showed that the degree of substitution (DS) of CL-Co-XGGA 1:2, 1:1, 2:1 excipients were respectively 0.067, 0.082 and 0.08. Besides that, the excipients gel strengths were 14.03, 17.27 and 20,70 gF, respectively. The cross-linked excipients had improved flow properties and swelling capability compared to the Co-XGGA excipients. The results of the gliclazide SR tablets evaluations showed that all tablets were passed all tablet requirements. Moreover, the gliclazide release from SR tablets F1 - F6 revealed the sustained release profile, which was following zero order kinetics (F1, F2, F3, F6) and Higuchi kinetics (F4 and F5). It could be concluded that the obtained CL-Co-XGGA excipients might be used as matrices for sustained release tablets and could retard drug release up to 8 until 32 hours.

  4. Physical Inactivity as a Predictor of High Prevalence of Hypertension ...

    African Journals Online (AJOL)

    Logistic and multiple linear regression models were used to calculate the risk of prevalent hypertension in physically inactive individuals and examine the association between physical activity and healthcare expenditure after controlling for confounders. Results: Hypertensive patients who were physically active accounted ...

  5. Physical Inactivity, Obesity, and Type 2 Diabetes: An Evolutionary Perspective

    Science.gov (United States)

    Eaton, S. Boyd; Eaton, Stanley B.

    2017-01-01

    Physical inactivity (and unhealthy nutrition) has distorted body composition and, in turn, reordered the proportions of myocyte and adipocyte insulin receptors. Insulin acting on adipocyte receptors produces less glucose uptake than does comparable interaction with myocyte receptors. Accordingly, in individuals with disproportionate muscle/fat…

  6. Motor proficiency and physical fitness in active and inactive girls ...

    African Journals Online (AJOL)

    In modern day society physical activity levels diminish rapidly among girls and may be a direct consequence of girls experiencing motor difficulties. Therefore the aim of the study was to compare motor proficiency levels and physical fitness levels among active and inactive girls (N=97), aged 12 to 13 years. The BOTMP ...

  7. Prevalence, social and health correlates of physical inactivity among ...

    African Journals Online (AJOL)

    Individuals who had high social capital (OR: 0.69, CI: 0.60, 0.79) were less likely to be physically inactive than those with low social capital. Several sociodemographic (older age, female, higher education and urban residence) and health risk (such as overweight, weak grip strength, functional disability, and low fruit and ...

  8. The Body Image Of Physically Active And Inactive Women

    Directory of Open Access Journals (Sweden)

    Guszkowska Monika

    2015-06-01

    Full Text Available Introduction. The aim of the study was to compare the image of the body, the level of its acceptance and satisfaction with it, as well as anxiety about one’s physical appearance and overall self-esteem in a group of adult women who did fitness exercise and those who were physically inactive.

  9. Inactive nurses: a source for alleviating the nursing shortage?

    Science.gov (United States)

    Williams, Kimberly A; Stotts, R Craig; Jacob, Susan R; Stegbauer, Cheryl C; Roussel, Linda; Carter, Donna

    2006-04-01

    This study seeks to provide an understanding of why inactive registered nurses chose to become inactive and what they would require for them to return to nursing. In 2000, a shortage of 110,000 (6%) registered nurses existed in the United States. If the current trends continue, the shortage is projected to grow to 29% by 2020. One solution to the nursing shortage may be attracting nurses with inactive licenses back into employment. This study used a quantitative, cross-sectional survey design. Data analysis included descriptive and inferential statistics. Inactive nurses (N = 428) younger than 60 years in 1 Southern state were surveyed. A major portion (27.6%) of these nurses left nursing because of a conflict between parenting duties and scheduling requirements (13.5%) at work and indicated that they would return to nursing if given the opportunity to work part-time, especially if shifts were flexible and shorter. Although the group of registered nurses younger than 60 years do not constitute a large percentage of nurses in this country, they are a potential source of alleviating, to some extent, the critical nursing shortage. Employers can encourage many of these nurses to return to work by providing more flexible work schedules, including part-time and shorter shifts, as well as decreased workloads.

  10. Automatic Detection of Inactive Solar Cell Cracks in Electroluminescence Images

    DEFF Research Database (Denmark)

    Spataru, Sergiu; Hacke, Peter; Sera, Dezso

    2017-01-01

    We propose an algorithm for automatic determination of the electroluminescence (EL) signal threshold level corresponding to inactive solar cell cracks, resulting from their disconnection from the electrical circuit of the cell. The method enables automatic quantification of the cell crack size an...

  11. Effects of probiotic (live and inactive Saccharomyces cerevisiae ) on ...

    African Journals Online (AJOL)

    The present work evaluated the effect of probiotic (live and inactive Saccharomyces cerevisiae) on meat and intestinal microbial properties of Japanese quails. Twenty-four (24) 1-day-old Japanese quails were obtained from a commercial hatchery. The birds were randomly divided into 2 groups. The dietary treatments ...

  12. Muscle activity and inactivity periods during normal daily life.

    Directory of Open Access Journals (Sweden)

    Olli Tikkanen

    Full Text Available Recent findings suggest that not only the lack of physical activity, but also prolonged times of sedentary behaviour where major locomotor muscles are inactive, significantly increase the risk of chronic diseases. The purpose of this study was to provide details of quadriceps and hamstring muscle inactivity and activity during normal daily life of ordinary people. Eighty-four volunteers (44 females, 40 males, 44.1±17.3 years, 172.3±6.1 cm, 70.1±10.2 kg were measured during normal daily life using shorts measuring muscle electromyographic (EMG activity (recording time 11.3±2.0 hours. EMG was normalized to isometric MVC (EMG(MVC during knee flexion and extension, and inactivity threshold of each muscle group was defined as 90% of EMG activity during standing (2.5±1.7% of EMG(MVC. During normal daily life the average EMG amplitude was 4.0±2.6% and average activity burst amplitude was 5.8±3.4% of EMG(MVC (mean duration of 1.4±1.4 s which is below the EMG level required for walking (5 km/h corresponding to EMG level of about 10% of EMG(MVC. Using the proposed individual inactivity threshold, thigh muscles were inactive 67.5±11.9% of the total recording time and the longest inactivity periods lasted for 13.9±7.3 min (2.5-38.3 min. Women had more activity bursts and spent more time at intensities above 40% EMG(MVC than men (p<0.05. In conclusion, during normal daily life the locomotor muscles are inactive about 7.5 hours, and only a small fraction of muscle's maximal voluntary activation capacity is used averaging only 4% of the maximal recruitment of the thigh muscles. Some daily non-exercise activities such as stair climbing produce much higher muscle activity levels than brisk walking, and replacing sitting by standing can considerably increase cumulative daily muscle activity.

  13. The effect of tobacco ingredients on smoke chemistry. Part II: casing ingredients.

    Science.gov (United States)

    Baker, Richard R; Pereira da Silva, José R; Smith, Graham

    2004-01-01

    This is the second part of a study in which the effects of adding a range of ingredients to tobacco on the chemistry of cigarette mainstream smoke are assessed. The examination of smoke chemistry has concentrated on those constituents in smoke that regulatory authorities in the USA and Canada believe to be relevant to smoking-related diseases. In this part of the study the effects of 29 casing ingredients and three humectants have been assessed at the maximum levels typically used on cigarettes by British American Tobacco. This brings the total number of ingredients assessed in Parts I and II of this study to 482. The casing ingredients were added at levels of up to 68 mg on the cigarettes. Their effects on smoke constituents were generally larger than the effects of flavouring ingredients, which were added at parts per million levels. Many of the casing ingredient mixtures either had no statistically significant effect on the level of the analytes investigated in smoke relative to a control cigarette, or they produced decreases of up to 44% in some cases. Those analytes that were increased in smoke are highlighted in this paper. The largest increases were for formaldehyde levels, up to 26 microg (73%) in one case, observed from casing mixtures containing sugar. This is most likely due to the generation of formaldehyde by pyrolysis of sugars. Occasional small increases were also observed for other analytes. However, the statistical significance of many of these increases was not present when the long-term variability of the analytical method was taken into account. The significance and possible reasons for the increases are discussed.

  14. New feed ingredients: the insect opportunity.

    Science.gov (United States)

    van Raamsdonk, L W D; van der Fels-Klerx, H J; de Jong, J

    2017-08-01

    In the framework of sustainability and a circular economy, new ingredients for feed are desired and, to this end, initiatives for implementing such novel ingredients have been started. The initiatives include a range of different sources, of which insects are of particular interest. Within the European Union, generally, a new feed ingredient should comply with legal constraints in terms of 'yes, provided that' its safety commits to a range of legal limits for heavy metals, mycotoxins, pesticides, contaminants, pathogens etc. In the case of animal proteins, however, a second legal framework applies which is based on the principle 'no, unless'. This legislation for eradicating transmissible spongiform encephalopathy consists of prohibitions with a set of derogations applying to specific situations. Insects are currently considered animal proteins. The use of insect proteins is a good case to illustrate this difference between a positive, although restricted, modus and a negative modus for allowing animal proteins. This overview presents aspects in the areas of legislation, feed safety, environmental issues, efficiency and detection of the identity of insects. Use of insects as an extra step in the feed production chain costs extra energy and this results in a higher footprint. A measure for energy conversion should be used to facilitate the comparison between production systems based on cold- versus warm-blooded animals. Added value can be found by applying new commodities for rearing, including but not limited to category 2 animal by-products, catering and household waste including meat, and manure. Furthermore, monitoring of a correct use of insects is one possible approach for label control, traceability and prevention of fraud. The link between legislation and enforcement is strong. A principle called WISE (Witful, Indicative, Societal demands, Enforceable) is launched for governing the relationship between the above-mentioned aspects.

  15. Variation in the Gender Gap in Inactive and Active Life Expectancy by the Definition of Inactivity Among Older Adults.

    Science.gov (United States)

    Malhotra, Rahul; Chan, Angelique; Ajay, Shweta; Ma, Stefan; Saito, Yasuhiko

    2016-10-01

    To assess variation in gender gap (female-male) in inactive life expectancy (IALE) and active life expectancy (ALE) by definition of inactivity. Inactivity, among older Singaporeans, was defined as follows: Scenario 1-health-related difficulty in activities of daily living (ADLs); Scenario 2-health-related difficulty in ADLs/instrumental ADLs (IADLs); Scenario 3-health-related difficulty in ADLs/IADLs or non-health-related non-performance of IADLs. Multistate life tables computed IALE and ALE at age 60, testing three hypotheses: In all scenarios, life expectancy, absolute and relative IALE, and absolute ALE are higher for females (Hypothesis 1 [H1]); gender gap in absolute and relative IALE expands, and in absolute ALE, it contracts in Scenario 2 versus 1 (Hypothesis 2 [H2]); gender gap in absolute and relative IALE decreases, and in absolute ALE, it increases in Scenario 3 versus 2 (Hypothesis 3 [H3]). H1 was supported in Scenarios 1 and 3 but not Scenario 2. Both H2 and H3 were supported. Definition of inactivity influences gender gap in IALE and ALE. © The Author(s) 2016.

  16. Entirely S-protected chitosan: A promising mucoadhesive excipient for metronidazole vaginal tablets.

    Science.gov (United States)

    Lupo, Noemi; Fodor, Benjamin; Muhammad, Ijaz; Yaqoob, Muhammad; Matuszczak, Barbara; Bernkop-Schnürch, Andreas

    2017-12-01

    Synthesis and evaluation of an entirely S-protected chitosan as mucoadhesive excipient for vaginal drug delivery. N-acetyl-cysteine was linked to 6-mercaptonicotinamide via disulphide exchange reaction. The obtained ligand, NAC-6-MNA, was subsequently attached to chitosan by carbodiimide mediated amide bond formation in two concentrations. The synthesized S-protected chitosan was chemically characterized and mucoadhesive properties and stability against oxidation were investigated. Moreover, metronidazole tablets comprising the S-protected chitosan were evaluated regarding water uptake capacity, disintegration behaviour, residence time on vaginal mucosa, release of the encapsulated drug and antimicrobial activity. S-protected chitosan displayed 160±19 (CS-MNA-160) and 320±38 (CS-MNA-320)µmol of ligand per gram of polymer. At pH 4.2, CS-MNA-160 and CS-MNA-320 showed 5.2-fold and 6.2-fold increase in mucus viscosity in comparison to unmodified chitosan (One-way ANOVA, pchitosan remained stable against oxidation in presence of 0.5%v/v hydrogen peroxide. Metronidazole tablets consisting in S-protected chitosan showed prolonged residence time on vaginal mucosa and improved water uptake capacity and disintegration time in comparison to tablets consisting of unmodified chitosan. Moreover, CS-MNA-320 metronidazole tablets displayed prolonged drug release and antimicrobial activity. On the basis of the achieved results, entirely S-protected chitosan represents a promising excipient for the development of metronidazole vaginal tablets. S-protected thiomers are polymers modified with thiol groups protected by aromatic ligands and characterized by strong mucoadhesive properties and high stability against oxidation. Up to date, the entirely S-protection of thiol groups was achieved via the synthesis of the ligand 2-((2-amino-2-carboxyethyl)disulfanyl)nicotinic acid) which can be directly bound to the backbone of polymers bearing carboxylic moieties as pectin. However, this

  17. Do Running and Strength Exercises Reduce Daily Muscle Inactivity Time?

    Directory of Open Access Journals (Sweden)

    Taija Finni

    2016-09-01

    Full Text Available Understanding how a specific exercise changes daily activity patterns is important when designing physical activity interventions. We examined the effects of strength and interval running exercise sessions on daily activity patterns using recordings of quadriceps and hamstring muscle electromyographic (EMG activity and inactivity. Five male and five female subjects taking part in a 10-week training programme containing both strength and interval running training sessions were measured for daily muscle EMG activities during three days: on a strength day, an interval running day, and a day without exercise. EMG was measured using textile electrodes embedded into sport shorts that were worn 9.1 ± 1.4 hours/day and results are given as % of recording time. During the total measurement time the muscles were inactive 55 ± 26%, 53 ± 30% and 71 ± 12% during strength training day, interval running day, and day without exercise (n.s.. When compared to the day without exercise, the change in muscle inactivity correlated negatively with change in light muscle activity in strength (r = -0.971,p< 0.001 and interval running days (r = -0.965,p< 0.001. While interval running exercise bout induced a more systematic decrease in muscle inactivity time (from 62 ± 15% to 6 ± 6%,p< 0.001, reductions in muscle inactivity in response to strength exercise were highly individual (range 5–70 pp despite the same training programme. Strength, but not running exercise bout, increased muscle activity levels occurring above 50% MVC (p< 0.05 when compared to a similar period without exercise. The effect of strength exercise bout on totaldaily recording time increased the EMG amplitudes across the entire intensity spectrum. While strength and interval running exercise are effective in increasing muscle moderate-to-vigorous activity when compared to a similar period without exercise, it comprises only a small part of the day and does not seem to have a systematic effect

  18. The Cumulative Daily Tolerance Levels of Potentially Toxic Excipients Ethanol and Propylene Glycol Are Commonly Exceeded in Neonates and Infants

    DEFF Research Database (Denmark)

    Valeur, Kristine Svinning; Hertel, Steen Axel; Lundstrøm, Kaare Engell

    2018-01-01

    neonates and infants and compare these levels to the tolerance limits found in guidelines published by European Medicines Agency (EMA). As part of the SEEN study, all medicinal products administered to neonates and infants were recorded. All included neonates received ≥2 medicinal products/day and infants...... ≥3 medicinal products/day. Daily excipient levels were calculated based on quantities obtained from manufacturers or databases. Excipient levels were compared to tolerance limits proposed by the EMA. Altogether, 470 neonates and 160 infants were included, recording 4207 prescriptions and 316 products...... exceed tolerance limit of 6 mg/kg/day. Of the total number of prescriptions involving PG-containing medicinal products (n = 174), 70% would alone exceed a maximum tolerance limit of 50 mg/kg/day. Maximal daily exposure to ethanol (1563 mg/kg/day) or PG (954 mg/kg/day) exceeded the tolerance limits...

  19. Our unrequited love for natural ingredients.

    Science.gov (United States)

    Burdock, George A; Wang, Wendan

    2017-09-01

    Naturally sourced food ingredients have been the beneficiary of legal, regulatory and consumer preference as the result of a widely shared assumption of safety. However, the natural substances consumed in modernity may have little to do with the historically consumed part of the plant or even the plant itself. Further, our initial impression of a safe plant derivative may well be false as the result of the use of different growth conditions or, changes in harvesting and processing conditions that may have brought about a higher level of toxic constituents. Despite the variability of plant constituents, manufacturers' standards are set according to the content of commercially desirable properties, rather than presence of potentially toxic constituents. Why then, after all the potential reservations regarding naturals, is there such an enmity toward synthetic chemicals (including single chemical fermentation products), which have been tested in a systematic manner for potential toxic effects and whose composition is well known as the result of consistent manufacturing techniques and analytical controls? The authors will describe the paradigms used for natural products safety review and compare them with the safety criteria required for an "artificial" food ingredient. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Denatured Whey Protein Powder as a New Matrix Excipient: Design and Evaluation of Mucoadhesive Tablets for Sustained Drug Release Applications.

    Science.gov (United States)

    Hsein, Hassana; Garrait, Ghislain; Tamani, Fahima; Beyssac, Eric; Hoffart, Valérie

    2017-02-01

    In earlier study, we proposed denatured whey protein (DWP) powder obtained by atomization as a new excipient to promote oral drug delivery. In this work, we evaluate the possibility to formulate tablets based on DWP powders and to characterize their role as a matrix mucoadhesive excipient. Tablets containing increased amount of DWP (10 to 30%) were produced by direct compression after mixing with theophylline, microcrystalline cellulose, Aerosil® and magnesium stearate. Dissolution behaviors of obtained tablets were evaluated in different USP buffers (pH 1.2, 4.5 and 6.8) and in simulated gastric and intestinal fluids and mechanisms analyzed by multiple mathematical models. Swelling, erosion and mucoadhesion were also evaluated. Finally, release and absorption were studied in the artificial digestive system (TIM 1). Tablets based on DWP and containing 300 mg of theophylline were obtained by direct compression. These tablets exhibited controlled release driven by diffusion starting from 15% DWP content whatever the pH studied. They also showed a great extent of swelling and water uptake while matrix weight loss was limited. Addition of enzymes accelerated drug release which became governed by erosion according to Peppas model. The present study shows that DWP powders can be successfully used as a pharmaceutical excipient, and in particular as a matrix mucoadhesive controlled release tablets.

  1. Emerging health problems among women: Inactivity, obesity, and metabolic syndrome

    Directory of Open Access Journals (Sweden)

    Yi-Ju Tsai

    2014-02-01

    Full Text Available The increase in obesity and metabolic syndrome has been documented worldwide. However, few studies have investigated the risk of inactivity, obesity, and metabolic syndrome specifically in women. Hormone balance plays a crucial role in regulating metabolism and helps to maintain optimal health. It is likely that the sex difference in obesity may be due to the variation in hormone concentration throughout a woman's life, which predisposes them to weight gain. This paper reviews previous literature and discusses factors that influence the risk of adiposity-related health consequences among women for three critical biological transitions throughout a woman's life: puberty, menopause, and pregnancy. To improve quality of life and metabolic health for women, interventions are needed to target women at different transition stages and provide tailored health education programs. Interventions should raise awareness of physical inactivity, obesity, and metabolic syndrome, and promote healthy behavioral change in women.

  2. Performance Evaluation of INACT - INDECT Advanced Image Cataloguing Tool

    Directory of Open Access Journals (Sweden)

    Libor Michalek

    2012-01-01

    Full Text Available In this article, we describe the performance evaluation of INACT tool which is developed for cataloguing of high-level and low-level metadata of the evidence material. INACT tool can be used by police forces in the cases of prosecution of such crimes as as possession and distribution of child pornography (CP. In live forensic cases, the time to first hit (time when the first image containing e.g. CP is found is important, as then further legal actions are justified (such as arrest of the suspect and his hardware. The performance evaluation of first hit was performed on real data with the cooperation of Czech Police, Department of Internet Crime.

  3. Flow rate and flow equation of pharmaceutical free-flowable powder excipients.

    Science.gov (United States)

    Sklubalová, Zdenka; Zatloukal, Zdenek

    2013-02-01

    Basic aspect of powder handling is powder flow which depends on mechanical properties of the solid material. This experimental work presents the results of flowability testing of the free-flowable particle size fraction of 0.0250-0.0315 cm of five powder excipients. The single-point determination of the mass flow rate from a cylindrical, flat-bottomed hopper was primarily influenced by the diameter of a circular orifice. The significant effect of the orifice height was also noted. Increasing the orifice height, the flow under gravity is directed resulting in the sudden acceleration of the flow rate. The critical zone relates to the orifice diameter. The multi-point determination of flowability employed the actual parameters of the flow equation which allows the prediction of the mass flow rate. The precision of the prediction was the basic criterion in optimization of the orifice geometry. Based on the results, the orifice height of 1.6 cm can be recommended for the correction of faster powder flow. For the slower powder flow, an orifice height of 0.2 cm can be used alternatively. In conclusion, the information about the orifice height used should be referred to whenever test the powder flowability and compare the results.

  4. Viscoelastic characterization of compacted pharmaceutical excipient materials by analysis of frequency-dependent mechanical relaxation processes

    Science.gov (United States)

    Welch, K.; Mousavi, S.; Lundberg, B.; Strømme, M.

    2005-09-01

    A newly developed method for determining the frequency-dependent complex Young's modulus was employed to analyze the mechanical response of compacted microcrystalline cellulose, sorbitol, ethyl cellulose and starch for frequencies up to 20 kHz. A Debye-like relaxation was observed in all the studied pharmaceutical excipient materials and a comparison with corresponding dielectric spectroscopy data was made. The location in frequency of the relaxation peak was shown to correlate to the measured tensile strength of the tablets, and the relaxation was interpreted as the vibrational response of the interparticle hydrogen and van der Waals bindings in the tablets. Further, the measured relaxation strength, holding information about the energy loss involved in the relaxation processes, showed that the weakest material in terms of tensile strength, starch, is the material among the four tested ones that is able to absorb the most energy within its structure when exposed to external perturbations inducing vibrations in the studied frequency range. The results indicate that mechanical relaxation analysis performed over relatively broad frequency ranges should be useful for predicting material properties of importance for the functionality of a material in applications such as, e.g., drug delivery, drug storage and handling, and also for clarifying the origin of hitherto unexplained molecular processes.

  5. Short-term Physical Inactivity Impairs Vascular Function

    Science.gov (United States)

    Nosova, Emily V.; Yen, Priscilla; Chong, Karen C.; Alley, Hugh F.; Stock, Eveline O.; Quinn, Alex; Hellmann, Jason; Conte, Michael S.; Owens, Christopher D.; Spite, Matthew; Grenon, S. Marlene

    2014-01-01

    Introduction Sedentarism, also termed physical inactivity, is an independent risk factor for cardiovascular diseases. Mechanisms thought to be involved include insulin resistance, dyslipidemia, hypertension, and increased inflammation. It is unknown whether changes in vascular and endothelial function also contribute to this excess risk. We hypothesized that short-term exposure to inactivity would lead to endothelial dysfunction, arterial stiffening and increased vascular inflammation. Methods Five healthy subjects (4 males and 1 female) underwent 5 days of bed rest (BR) to simulate inactivity. Measurements of vascular function [flow-mediated vasodilation (FMD) to evaluate endothelial function; applanation tonometry to assess arterial resistance], inflammation and metabolism were made before BR, daily during BR and after 2 recovery days. Subjects maintained an isocaloric diet throughout. Results Bed rest led to significant decreases in brachial artery and femoral artery FMD [Brachial: 11 ± 3% pre-BR vs. 9 ± 2% end-BR, P=0.04; Femoral: 4 ± 1% vs. 2 ± 1%, P=0.04]. The central augmentation index increased with BR [−4 ± 9% vs. 5 ± 11%, P=0.03]. Diastolic blood pressure (DBP) increased [58 ± 7 mmHg vs. 62 ± 7 mmHg, P=0.02], while neither systolic blood pressure nor heart rate changed. 15-HETE, an arachidonic acid metabolite, increased but the other inflammatory and metabolic biomarkers were unchanged. Conclusions Our findings show that acute exposure to sedentarism results in decreased endothelial function, arterial stiffening, increased DBP, and an increase in 15-HETE. We speculate that inactivity promotes a vascular “deconditioning” state characterized by impaired endothelial function, leading to arterial stiffness and increased arterial tone. Although physiologically significant, the underlying mechanisms and clinical relevance of these findings need to be further explored. PMID:24630521

  6. Investigation of the organic matter in inactive nuclear tank liquids

    International Nuclear Information System (INIS)

    Schenley, R.L.; Griest, W.H.

    1990-08-01

    Environmental Protection Agency (EPA) methodology for regulatory organics fails to account for the organic matter that is suggested by total organic carbon (TOC) analysis in the Oak Ridge National Laboratory (ORNL) inactive nuclear waste-tank liquids and sludges. Identification and measurement of the total organics are needed to select appropriate waste treatment technologies. An initial investigation was made of the nature of the organics in several waste-tank liquids. This report details the analysis of ORNL wastes

  7. The pulsed migration of hydrocarbons across inactive faults

    Directory of Open Access Journals (Sweden)

    S. D. Harris

    1999-01-01

    Full Text Available Geological fault zones are usually assumed to influence hydrocarbon migration either as high permeability zones which allow enhanced along- or across-fault flow or as barriers to the flow. An additional important migration process inducing along- or across-fault migration can be associated with dynamic pressure gradients. Such pressure gradients can be created by earthquake activity and are suggested here to allow migration along or across inactive faults which 'feel' the quake-related pressure changes; i.e. the migration barriers can be removed on inactive faults when activity takes place on an adjacent fault. In other words, a seal is viewed as a temporary retardation barrier which leaks when a fault related fluid pressure event enhances the buoyancy force and allows the entry pressure to be exceeded. This is in contrast to the usual model where a seal leaks because an increase in hydrocarbon column height raises the buoyancy force above the entry pressure of the fault rock. Under the new model hydrocarbons may migrate across the inactive fault zone for some time period during the earthquake cycle. Numerical models of this process are presented to demonstrate the impact of this mechanism and its role in filling traps bounded by sealed faults.

  8. Physical inactivity affects skeletal muscle insulin signaling in a birth weight-dependent manner

    DEFF Research Database (Denmark)

    Mortensen, Brynjulf; Friedrichsen, Martin; Andersen, Nicoline Resen

    2014-01-01

    We investigated whether physical inactivity could unmask defects in insulin and AMPK signaling in low birth weight (LBW) subjects.......We investigated whether physical inactivity could unmask defects in insulin and AMPK signaling in low birth weight (LBW) subjects....

  9. The Ameliorated Pharmacokinetics of VP-16 in Wistar Rats: A Possible Role of P-Glycoprotein Inhibition by Pharmaceutical Excipients.

    Science.gov (United States)

    Akhtar, Naseem; Ahad, Abdul; Khan, Mohd Faiyaz; Allaham, Ayman; Talegaonkar, Sushama

    2017-04-01

    The selection of suitable functional excipients with low toxicity index and having P-glycoprotein inhibitory characteristics represents a major innovative step in designing a promising formulation for oral chemotherapy. This study was aimed at investigating the chemosensitizing effect of selected pharmaceutical excipients to improve the in vivo pharmacokinetic performance of VP-16. The pharmaceutical excipients having P-glycoprotein inhibitory activity were screened by shake flask method for their VP-16 solubilization capacity. The cumulative amount of VP-16 was determined with or without the selected pharmaceutical excipients at three different concentrations (0.1 % w/v, 0.5 % w/v and 1 % w/v) by an everted gut sac technique. Moreover, pharmacokinetic studies were also performed to determine the oral bioavailability assessment of VP-16 in albino male Wistar rats. The absorptive transport from mucosal-to-serosal (M → S) and secretory transport from serosal-to-mucosal (S → M) for VP-16 solution over 90 min were found to be (3.58 ± 0.32) × 10 -6 and (14.63 ± 3.11) × 10 -6  cm/s, respectively, with a net efflux of 4.08. Addition of verapamil (200 µM), a P-glycoprotein inhibitor, elevated the transport from M → S [Papp from (3.58 ± 0.32) to (9.66 ± 1.55) × 10 -6 cm/s, p oral administration (4.5 mg/kg) in rats was increased significantly (p solution at a concentration of 5 % (w/v) when compared with VP-16 solution alone. The findings suggest that pharmaceutical excipients may be employed in the development of drug delivery systems to improve the oral bioavailability of drugs having low solubility and/or less permeability as a result of substantial P-glycoprotein mediated efflux.

  10. Development of co-processed excipients in the design and evaluation of atorvastatin calcium tablets by direct compression method.

    Science.gov (United States)

    Pusapati, Ravi Teja; Kumar, Mvr Kalyan; Rapeti, Siva Satyanandam; Murthy, Tegk

    2014-04-01

    Co-processed excipients were prepared to improve the process ability and efficacy of commonly used excipients and to impart multi-functional qualities to the excipients and hence that the tablets with the desired attributes can be produced. In this study, acacia and calcium carbonate (CaCO3) were used to prepare a co-processing excipient suitable for the preparation of atorvastatin calcium tablets. Acacia is used as binder and CaCO3 as filler. CaCO3 also acts as alkalizer and thus suitable to improve the dissolution rate of pH dependent soluble drugs like atorvastatin. The tablets were prepared by direct compression method and the physical properties of tablets such as hardness, friability and dissolution profiles of tablets were evaluated. Acacia was used in the form of mucilage. Various ratios of the co-processing excipients were formulated by granulation technique and the blend properties were evaluated by their Hausner's ratio and Carr's index values. Based on the Kawakita plots, it was found that the formulation with 3% acacia mucilage (0.9 mg acacia and 26.6 mg of CaCO3) showed good fluidity and the formulations with 4% (1.27 mg of acacia and 26.23 mg of CaCO3) and 5% acacia mucilage (1.62 mg of acacia and 25.88 mg of CaCO3) showed more cohesiveness. The formulations include 1-5% of the acacia mucilage as the binding agent. The granules of formulations with low percentage of acacia mucilage (1% and 2%) failed the test for friability. The granules of the formulations with pure acacia (F1) and pure CaCO3 (F2) showed passable flow properties. The formulation with 3% acacia mucilage (F3, 0.9 mg acacia and 26.6 mg of CaCO3) showed least dissolution time (<1 min) and is found as the best formulation among the other formulations containing 4% (F4, 1.27 mg of acacia and 26.23 mg of CaCO3) and 5% (F5, 1.62 mg of acacia and 25.88 mg of CaCO3) acacia mucilage.

  11. Spirulina as a functional ingredient in broiler chicken diets | Bonos ...

    African Journals Online (AJOL)

    , especially eicosapentaenoic acid and docosahexaenoic acid after spirulina supplementation. Therefore, spirulina could be a promising functional ingredient in broiler chicken nutrition. Keywords: Poultry, microalgae, performance, meat ...

  12. ERICA: leisure-time physical inactivity in Brazilian adolescents

    Science.gov (United States)

    Cureau, Felipe Vogt; da Silva, Thiago Luiz Nogueira; Bloch, Katia Vergetti; Fujimori, Elizabeth; Belfort, Dilson Rodrigues; de Carvalho, Kênia Mara Baiocchi; de Leon, Elisa Brosina; de Vasconcellos, Mauricio Teixeira Leite; Ekelund, Ulf; Schaan, Beatriz D

    2016-01-01

    ABSTRACT OBJECTIVE To evaluate the prevalence of leisure-time physical inactivity in Brazilian adolescents and their association with geographical and sociodemographic variables. METHODS The sample was composed by 74,589 adolescents participating in the Study of Cardiovascular Risks in Adolescents (ERICA). This cross-sectional study of school basis with national scope involved adolescents aged from 12 to 17 years in Brazilian cities with more than 100 thousand inhabitants. The prevalence of leisure-time physical inactivity was categorized according to the volume of weekly practice (< 300; 0 min). The prevalences were estimated for the total sample and by sex. Poisson regression models were used to assess associated factors. RESULTS The prevalence of leisure-time physical inactivity was 54.3% (95%CI 53.4-55.2), and higher for the female sex (70.7%, 95%CI 69.5-71.9) compared to the male (38.0%, 95%CI 36.7-39.4). More than a quarter of adolescents (26.5%, 95%CI 25.8-27.3) reported not practicing physical activity in the leisure time, a condition more prevalent for girls (39.8%, 95%CI 38.8-40.9) than boys (13.4%, 95%CI 12.4-14.4). For girls, the variables that were associated with physical inactivity were: reside in the Northeast (RP = 1.13, 95%CI 1.08-1.19), Southeast (RP = 1.16, 95%CI 1.11-1.22) and South (RP = 1.12, 95%CI 1.06-1.18); have 16-17 years (RP = 1.06, 95%CI 1.12-1.15); and belong to the lower economic class (RP = 1.33, 95%CI 1.20-1.48). The same factors, except reside in the Southeast and South, were also associated with not practicing physical activity in the leisure time for the same group. In males, as well as the region, being older (p < 0.001) and declaring to be indigenous (RP = 0.37, 95%CI 0.19-0.73) were also associated with not practicing physical activities in the leisure time. CONCLUSIONS The prevalence of leisure-time physical inactivity in Brazilian adolescents is high. It presents regional variations and is associated with age and low

  13. Final report of the Cosmetic Ingredient Review Expert Panel amended safety assessment of Calendula officinalis-derived cosmetic ingredients.

    Science.gov (United States)

    Andersen, F Alan; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W

    2010-01-01

    Calendula officinalis extract, C officinalis flower, C officinalis flower extract, C officinalis flower oil, and C officinalis seed oil are cosmetic ingredients derived from C officinalis. These ingredients may contain minerals, carbohydrates, lipids, phenolic acids, flavonoids, tannins, coumarins, sterols and steroids, monoterpenes, sesquiterpenes, triterpenes, tocopherols, quinones, amino acids, and resins. These ingredients were not significantly toxic in single-dose oral studies using animals. The absence of reproductive/developmental toxicity was inferred from repeat-dose studies of coriander oil, with a similar composition. Overall, these ingredients were not genotoxic. They also were not irritating, sensitizing, or photosensitizing in animal or clinical tests but may be mild ocular irritants. The Cosmetic Ingredient Review (CIR) Expert Panel concluded that these ingredients are safe for use in cosmetics in the practices of use and concentration given in this amended safety assessment.

  14. 38 CFR 3.372 - Initial grant following inactivity of tuberculosis.

    Science.gov (United States)

    2010-07-01

    ... inactivity of tuberculosis. 3.372 Section 3.372 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF... Considerations Relative to Specific Diseases § 3.372 Initial grant following inactivity of tuberculosis. When... tuberculosis and there is satisfactory evidence that the condition was active previously but is now inactive...

  15. Bulk Freeze-Drying Milling: a Versatile Method of Developing Highly Porous Cushioning Excipients for Compacted Multiple-Unit Pellet Systems (MUPS).

    Science.gov (United States)

    Siow, Carin Ru Shan; Heng, Paul Wan Sia; Chan, Lai Wah

    2018-02-01

    The compaction of multiple-unit pellet system (MUPS) is a challenging process due to the ease of coat damage under high compression pressure, thereby altering drug release rates. To overcome this, cushioning excipients are added to the tablet formulation. Excipients can be processed into pellets/granules and freeze-dried to increase their porosity and cushioning performance. However, successful formation of pellets/granules has specific requirements that limit formulation flexibility. In this study, a novel top-down approach that harnessed bulk freeze-drying milling was explored to avoid the challenges of pelletization/granulation. Aqueous dispersions containing 20%, w/w hydroxypropyl methylcellulose (HPMC), partially pregelatinised starch or polyvinylpyrrolidone alone, and with lactose (Lac) in 1:1 ratio, were freeze-dried and then milled to obtain particulate excipients for characterization and evaluation of their cushioning performance. This study demonstrated that bulk freeze-drying milling is a versatile method for developing excipients that are porous and directly compressible. The freeze-drying process modified the materials in a unique manner which could impart cushioning properties. Compared to unprocessed excipients, the freeze-dried products generally exhibited better cushioning effects. The drug release profile of drug-loaded pellets compacted with freeze-dried Lac-HPMC excipients was similar to that of the uncompacted drug-loaded pellets (f 2 value = 51.7), indicating excellent cushioning effects. It was proposed that the specific balance of brittle and plastic nature of the freeze-dried Lac-HPMC composite conferred greater protective effect to the drug-loaded pellets, making it advantageous as a cushioning excipient.

  16. Aerosol Drug Delivery During Noninvasive Positive Pressure Ventilation: Effects of Intersubject Variability and Excipient Enhanced Growth.

    Science.gov (United States)

    Walenga, Ross L; Longest, P Worth; Kaviratna, Anubhav; Hindle, Michael

    2017-06-01

    Nebulized aerosol drug delivery during the administration of noninvasive positive pressure ventilation (NPPV) is commonly implemented. While studies have shown improved patient outcomes for this therapeutic approach, aerosol delivery efficiency is reported to be low with high variability in lung-deposited dose. Excipient enhanced growth (EEG) aerosol delivery is a newly proposed technique that may improve drug delivery efficiency and reduce intersubject aerosol delivery variability when coupled with NPPV. A combined approach using in vitro experiments and computational fluid dynamics (CFD) was used to characterize aerosol delivery efficiency during NPPV in two new nasal cavity models that include face mask interfaces. Mesh nebulizer and in-line dry powder inhaler (DPI) sources of conventional and EEG aerosols were both considered. Based on validated steady-state CFD predictions, EEG aerosol delivery improved lung penetration fraction (PF) values by factors ranging from 1.3 to 6.4 compared with conventional-sized aerosols. Furthermore, intersubject variability in lung PF was very high for conventional aerosol sizes (relative differences between subjects in the range of 54.5%-134.3%) and was reduced by an order of magnitude with the EEG approach (relative differences between subjects in the range of 5.5%-17.4%). Realistic in vitro experiments of cyclic NPPV demonstrated similar trends in lung delivery to those observed with the steady-state simulations, but with lower lung delivery efficiencies. Reaching the lung delivery efficiencies reported with the steady-state simulations of 80%-90% will require synchronization of aerosol administration during inspiration and reducing the size of the EEG aerosol delivery unit. The EEG approach enabled high-efficiency lung delivery of aerosols administered during NPPV and reduced intersubject aerosol delivery variability by an order of magnitude. Use of an in-line DPI device that connects to the NPPV mask appears to be a

  17. Compatibility studies of nevirapine in physical mixtures with excipients for oral HAART

    International Nuclear Information System (INIS)

    Oliveira, G.G.G. de; Ferraz, H.G.; Severino, P.; Souto, E.B.

    2013-01-01

    Nevirapine is a hydrophobic non-nucleoside reverse transcriptase inhibitor, used in first line regimens of highly active antiretroviral therapy (HAART). The drug has more than one crystalline form, which may have implications for its behaviour during production and also for its in vivo performance. This study was aimed at exploring the suitability of thermoanalytical methods for the solid-state characterization of commercial crystalline forms of nevirapine. The drug powder was characterized by ultraviolet spectrophotometry, stereoscopy, scanning electron microscopy, wide-angle X-ray diffraction, measurements of density, flowability, solubility and intrinsic dissolution rate (IDR), differential scanning calorimetry, thermogravimetric analysis, and photostability measurements. The results showed that nevirapine has high stability and is not susceptible to degradation under light exposure. The drug showed compatibility with the excipients tested (lactose, microcrystalline cellulose, polyvinylpyrrolidone and polyvinyl acetate copolymer (PVP/PVA), and hydroxypropylmethylcellulose (HPMC)). Nevirapine has low solubility, an acid medium being the most appropriate medium for assessing the release of the drug from dosage forms. However, the data obtained from IDR testing indicate that dissolution is the critical factor for the bioavailability of this drug. - Graphical abstract: Bulk nevirapine powder analysed by scanning electron microscopy and the drug solubility profile in various buffer solutions. The pH values of the media in which the tests were conducted are also presented. Highlights: ► Nevirapine shows more than one crystalline form, that influence its in vivo and in vitro behaviour. ► DSC and TGA were used for solid-state characterization of crystalline forms of nevirapine. ► Nevirapine is compatible with lactose, microcrystalline cellulose, PVP/PVA copolymers and HPMC. ► The acid form of nevirapine is the most appropriate for assessing release profile from

  18. Compatibility studies of nevirapine in physical mixtures with excipients for oral HAART

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, G.G.G. de; Ferraz, H.G. [Department of Pharmacy, Faculty of Pharmaceutical Health, University of Sao Paulo, Sao Paulo 05508-900 (Brazil); Severino, P. [Department of Biotechnological Processes, School of Chemical Engineering, University of Campinas, Campinas 13083-970 (Brazil); Department of Pharmaceutical Technology, Faculty of Health Sciences, Fernando Pessoa University, Porto 4200-150 (Portugal); Souto, E.B., E-mail: eliana@ufp.edu.pt [Department of Pharmaceutical Technology, Faculty of Health Sciences, Fernando Pessoa University, Porto 4200-150 (Portugal); Institute for Biotechnology and Bioengineering, Centre for Genomics and Biotechnology, University of Tras-os-Montes e Alto Douro (IBB-CGB/UTAD), 5001-801 Vila Real (Portugal)

    2013-03-01

    Nevirapine is a hydrophobic non-nucleoside reverse transcriptase inhibitor, used in first line regimens of highly active antiretroviral therapy (HAART). The drug has more than one crystalline form, which may have implications for its behaviour during production and also for its in vivo performance. This study was aimed at exploring the suitability of thermoanalytical methods for the solid-state characterization of commercial crystalline forms of nevirapine. The drug powder was characterized by ultraviolet spectrophotometry, stereoscopy, scanning electron microscopy, wide-angle X-ray diffraction, measurements of density, flowability, solubility and intrinsic dissolution rate (IDR), differential scanning calorimetry, thermogravimetric analysis, and photostability measurements. The results showed that nevirapine has high stability and is not susceptible to degradation under light exposure. The drug showed compatibility with the excipients tested (lactose, microcrystalline cellulose, polyvinylpyrrolidone and polyvinyl acetate copolymer (PVP/PVA), and hydroxypropylmethylcellulose (HPMC)). Nevirapine has low solubility, an acid medium being the most appropriate medium for assessing the release of the drug from dosage forms. However, the data obtained from IDR testing indicate that dissolution is the critical factor for the bioavailability of this drug. - Graphical abstract: Bulk nevirapine powder analysed by scanning electron microscopy and the drug solubility profile in various buffer solutions. The pH values of the media in which the tests were conducted are also presented. Highlights: Black-Right-Pointing-Pointer Nevirapine shows more than one crystalline form, that influence its in vivo and in vitro behaviour. Black-Right-Pointing-Pointer DSC and TGA were used for solid-state characterization of crystalline forms of nevirapine. Black-Right-Pointing-Pointer Nevirapine is compatible with lactose, microcrystalline cellulose, PVP/PVA copolymers and HPMC. Black

  19. Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing.

    Science.gov (United States)

    Goyanes, Alvaro; Fina, Fabrizio; Martorana, Annalisa; Sedough, Daniel; Gaisford, Simon; Basit, Abdul W

    2017-07-15

    The aim of this study was to manufacture 3D printed tablets (printlets) from enteric polymers by single filament fused deposition modeling (FDM) 3D printing (3DP). Hot melt extrusion was used to generate paracetamol-loaded filaments from three different grades of the pharmaceutical excipient hypromellose acetate succinate (HPMCAS), grades LG, MG and HG. One-step 3DP was used to process these filaments into enteric printlets incorporating up to 50% drug loading with two different infill percentages (20 and 100%). X-ray Micro Computed Tomography (Micro-CT) analysis revealed that printlets with 20% infill had cavities in the core compared to 100% infill, and that the density of the 50% drug loading printlets was higher than the equivalent formulations loaded with 5% drug. In biorelevant bicarbonate dissolution media, drug release from the printlets was dependent on the polymer composition, drug loading and the internal structure of the formulations. All HPMCAS-based printlets showed delayed drug release properties, and in the intestinal conditions, drug release was faster from the printlets prepared with polymers with a lower pH-threshold: HPMCAS LG > HPMCAS MG > HPMCAS HG. These results confirm that FDM 3D printing makes it possible not only to manufacture delayed release printlets without the need for an outer enteric coating, but it is also feasible to adapt the release profile in response to the personal characteristics of the patient, realizing the full potential of additive manufacturing in the development of personalised dose medicines. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. 21 CFR 333.110 - First aid antibiotic active ingredients.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false First aid antibiotic active ingredients. 333.110... (CONTINUED) DRUGS FOR HUMAN USE TOPICAL ANTIMICROBIAL DRUG PRODUCTS FOR OVER-THE-COUNTER HUMAN USE First Aid Antibiotic Drug Products § 333.110 First aid antibiotic active ingredients. The product consists of any of...

  1. Potential of Insect-Derived Ingredients for Food Applications

    NARCIS (Netherlands)

    Tzompa Sosa, D.A.; Fogliano, V.

    2017-01-01

    Insects are a sustainable and efficient protein and lipid source, compared with conventional livestock. Moreover, insect proteins and lipids are highly nutritional. Therefore, insect proteins and lipids can find its place as food ingredients. The use of insect proteins and lipids as food ingredients

  2. Structured adsorbents for isolation of functional food ingredients

    NARCIS (Netherlands)

    Rodriguez Illera, M.

    2014-01-01

    Separation and purification of functional ingredients from raw or waste streams are often done via processes that include a chromatographic step using a packed bed of resin particles that have affinity for the ingredients to be separated. A column packed with these particles presents numerous

  3. DNA methylation profiles of human active and inactive X chromosomes.

    Science.gov (United States)

    Sharp, Andrew J; Stathaki, Elisavet; Migliavacca, Eugenia; Brahmachary, Manisha; Montgomery, Stephen B; Dupre, Yann; Antonarakis, Stylianos E

    2011-10-01

    X-chromosome inactivation (XCI) is a dosage compensation mechanism that silences the majority of genes on one X chromosome in each female cell. To characterize epigenetic changes that accompany this process, we measured DNA methylation levels in 45,X patients carrying a single active X chromosome (X(a)), and in normal females, who carry one X(a) and one inactive X (X(i)). Methylated DNA was immunoprecipitated and hybridized to high-density oligonucleotide arrays covering the X chromosome, generating epigenetic profiles of active and inactive X chromosomes. We observed that XCI is accompanied by changes in DNA methylation specifically at CpG islands (CGIs). While the majority of CGIs show increased methylation levels on the X(i), XCI actually results in significant reductions in methylation at 7% of CGIs. Both intra- and inter-genic CGIs undergo epigenetic modification, with the biggest increase in methylation occurring at the promoters of genes silenced by XCI. In contrast, genes escaping XCI generally have low levels of promoter methylation, while genes that show inter-individual variation in silencing show intermediate increases in methylation. Thus, promoter methylation and susceptibility to XCI are correlated. We also observed a global correlation between CGI methylation and the evolutionary age of X-chromosome strata, and that genes escaping XCI show increased methylation within gene bodies. We used our epigenetic map to predict 26 novel genes escaping XCI, and searched for parent-of-origin-specific methylation differences, but found no evidence to support imprinting on the human X chromosome. Our study provides a detailed analysis of the epigenetic profile of active and inactive X chromosomes.

  4. Fragranced consumer products and undisclosed ingredients

    International Nuclear Information System (INIS)

    Steinemann, Anne C.

    2009-01-01

    Fragranced consumer products-such as air fresheners, laundry supplies, personal care products, and cleaners-are widely used in homes, businesses, institutions, and public places. While prevalent, these products can contain chemicals that are not disclosed to the public through product labels or material safety data sheets (MSDSs). What are some of these chemicals and what limits their disclosure? This article investigates these questions, and brings new pieces of evidence to the science, health, and policy puzzle. Results from a regulatory analysis, coupled with a chemical analysis of six best-selling products (three air fresheners and three laundry supplies), provide several findings. First, no law in the U.S. requires disclosure of all chemical ingredients in consumer products or in fragrances. Second, in these six products, nearly 100 volatile organic compounds (VOCs) were identified, but none of the VOCs were listed on any product label, and one was listed on one MSDS. Third, of these identified VOCs, ten are regulated as toxic or hazardous under federal laws, with three (acetaldehyde, chloromethane, and 1,4-dioxane) classified as Hazardous Air Pollutants (HAPs). Results point to a need for improved understanding of product constituents and mechanisms between exposures and effects

  5. Direct estimation of the permeation of topical excipients through artificial membranes and human skin with non-invasive Terahertz time-domain techniques.

    Science.gov (United States)

    Lopez-Dominguez, Victor; Boix-Montañes, Antoni; Redo-Sanchez, Albert; Tejada-Palacios, Javier

    2016-07-01

    Drug permeation through skin, or a synthetic membrane, from locally acting pharmaceutical products can be influenced by the permeation behaviour of pharmaceutical excipients. Terahertz time-domain technology is investigated as a non-invasive method for a direct and accurate measurement of excipients permeation through synthetic membranes or human skin. A series of in-vitro release and skin permeation experiments of liquid excipients (e.g. propylene glycol and polyethylene glycol 400) has been conducted with vertical diffusion cells. The permeation profiles of excipients through different synthetic membranes or skin were obtained using Terahertz pulses providing a direct measurement. Corresponding permeation flux and permeability coefficient values were calculated based on temporal changes of the terahertz pulses. The influence of different experimental conditions, such as the polarity of the membrane and the viscosity of the permeant, was assessed in release experiments. Specific transmembrane flux values of those excipients were directly calculated with statistical differences between cases. Finally, an attempt to estimate the skin permeation of propylene glycol with this technique was also achieved. All these permeation results were likely comparable to those obtained by other authors with usual analytical techniques. Terahertz time-domain technology is shown to be a suitable technique for an accurate and non-destructive measurement of the permeation of liquid substances through different synthetic membranes or even human skin. © 2016 Royal Pharmaceutical Society.

  6. ERICA: leisure-time physical inactivity in Brazilian adolescents.

    Science.gov (United States)

    Cureau, Felipe Vogt; da Silva, Thiago Luiz Nogueira; Bloch, Katia Vergetti; Fujimori, Elizabeth; Belfort, Dilson Rodrigues; de Carvalho, Kênia Mara Baiocchi; de Leon, Elisa Brosina; de Vasconcellos, Mauricio Teixeira Leite; Ekelund, Ulf; Schaan, Beatriz D

    2016-02-01

    OBJECTIVE To evaluate the prevalence of leisure-time physical inactivity in Brazilian adolescents and their association with geographical and sociodemographic variables. METHODS The sample was composed by 74,589 adolescents participating in the Study of Cardiovascular Risks in Adolescents (ERICA). This cross-sectional study of school basis with national scope involved adolescents aged from 12 to 17 years in Brazilian cities with more than 100 thousand inhabitants. The prevalence of leisure-time physical inactivity was categorized according to the volume of weekly practice (Southeast (RP = 1.16, 95%CI 1.11-1.22) and South (RP = 1.12, 95%CI 1.06-1.18); have 16-17 years (RP = 1.06, 95%CI 1.12-1.15); and belong to the lower economic class (RP = 1.33, 95%CI 1.20-1.48). The same factors, except reside in the Southeast and South, were also associated with not practicing physical activity in the leisure time for the same group. In males, as well as the region, being older (p Brazilian adolescents is high. It presents regional variations and is associated with age and low socioeconomic status. Special attention should be given to girls and to those who do not engage in any physical activity during the leisure time, so that they can adopt a more active lifestyle.

  7. Supplier's Status for Critical Solid Propellants, Explosive, and Pyrotechnic Ingredients

    Science.gov (United States)

    Sims, B. L.; Painter, C. R.; Nauflett, G. W.; Cramer, R. J.; Mulder, E. J.

    2000-01-01

    In the early 1970's a program was initiated at the Naval Surface Warfare Center/Indian Head Division (NSWC/IHDIV) to address the well-known problems associated with availability and suppliers of critical ingredients. These critical ingredients are necessary for preparation of solid propellants and explosives manufactured by the Navy. The objective of the program was to identify primary and secondary (or back-up) vendor information for these critical ingredients, and to develop suitable alternative materials if an ingredient is unavailable. In 1992 NSWC/IHDIV funded Chemical Propulsion Information Agency (CPIA) under a Technical Area Task (TAT) to expedite the task of creating a database listing critical ingredients used to manufacture Navy propellant and explosives based on known formulation quantities. Under this task CPIA provided employees that were 100 percent dedicated to the task of obtaining critical ingredient suppliers information, selecting the software and designing the interface between the computer program and the database users. TAT objectives included creating the Explosive Ingredients Source Database (EISD) for Propellant, Explosive and Pyrotechnic (PEP) critical elements. The goal was to create a readily accessible database, to provide users a quick-view summary of critical ingredient supplier's information and create a centralized archive that CPIA would update and distribute. EISD funding ended in 1996. At that time, the database entries included 53 formulations and 108 critical used to manufacture Navy propellant and explosives. CPIA turned the database tasking back over to NSWC/IHDIV to maintain and distribute at their discretion. Due to significant interest in propellant/explosives critical ingredients suppliers' status, the Propellant Development and Characterization Subcommittee (PDCS) approached the JANNAF Executive committee (EC) for authorization to continue the critical ingredient database work. In 1999, JANNAF EC approved the PDCS panel

  8. Dissolution and Solubility Enhancement of the Highly Lipophilic Drug Phenytoin via Interaction with Poly(N-isopropylacrylamide-co-vinylpyrrolidone) Excipients.

    Science.gov (United States)

    Widanapathirana, Lakmini; Tale, Swapnil; Reineke, Theresa M

    2015-07-06

    Excipients of natural or synthetic origin play an important role in pharmaceutical performance to enhance the solubility, bioavailability, release, and stability of insoluble drugs. Herein, a series of seven excipient models was prepared by both homopolymerization and copolymerization of 1-vinyl-2-pyrrolidone (VP) and N-isopropylacrylamide (NIPAAm) by free radical polymerization yielding two homopolymers poly(VP) and poly(NIPAAm) and five copolymers of poly(NIPAAm-co-VP) at difference compositions. While the VP monomer provided aqueous solubility at a variety of conditions to the excipient, the incorporation of NIPAAm into the copolymer offered additional hydrogen bond donating sites to optimize the drug-polymer interactions in the system. Due to the presence of NIPAAm, the copolymers were sensitive to temperature as well. It was found that as the proportion of VP was increased (from 0 to 100%), the lower critical solution temperature (LCST) and the water solubility of the polymer models increased. To examine the role of specific drug-polymer interactions during dissolution on drug solubility and bioavailability, the polymers were formulated with the anticonvulsant drug phenytoin, which is a poorly water-soluble BCS class II drug where oral absorption is limited by the drug solubility. Amorphous solid dispersions (ASD) were prepared via spray drying of phenytoin with the polymer excipient models to contain 10% and 25% by weight drug loading. Physical characterization of the ASDs by powder X-ray diffraction (PXRD) and differential scanning calorimetry (DSC) revealed that the polymers held the drug in a high-energy amorphous phase in all the formulations prepared. All ASDs exhibited improved in vitro dissolution rates compared to drug only and physical mixtures of the polymers and the drug. Drug solubility was the highest with the ASDs containing poly(NIPAAm-co-VP) 60:40 and 50:50, which showed a solubility enhancement of near 14-fold increase compared to pure drug

  9. Coffee silverskin: a possible valuable cosmetic ingredient.

    Science.gov (United States)

    Rodrigues, Francisca; Palmeira-de-Oliveira, Ana; das Neves, José; Sarmento, Bruno; Amaral, M Helena; Oliveira, M Beatriz P P

    2015-03-01

    Currently, there is a great tendency in cosmetic area to use natural extracts. Coffee silverskin (CS) is the most abundant solid by-product generated during roasting of coffee processing. To evaluate different CS extracts as promising cosmetic ingredients, regarding antioxidant, antimicrobial, and cytotoxic properties. Aqueous, hydroalcoholic and ethanolic CS extracts were obtained by an environmentally friendly procedure considering costs and pollution. Extracts were characterized for total phenolic and flavonoid contents (TPC and TFC, respectively), antioxidant activity by 1,1-diphenyl-2-picrylhydrazyl (DPPH), ferric reducing antioxidant power (FRAP), antimicrobial activity expressed as minimal inhibitory concentration (MIC) and cytotoxicity using the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) and lactate dehydrogenase (LDH) assays in two skin cell lines (fibroblasts and keratinocytes). The TPC of extracts was 18.33-35.25 mg of gallic acid equivalents per g of material on a dry basis (mg GAE/g db). The TFC of extracts was 1.08-2.47 µg cathechin equivalents per g dry material (µg CE/g db). The antioxidant activity was high, with values ranging between 95.95 and 216.40 µmol Fe(2+)/g for aqueous and alcoholic samples, respectively. Preliminary assays for antimicrobial potential showed that extracts display antibacterial activity. The MIC varied from 31.3 to 250 µg/mL for Gram-positive, and from 31.3 to 1000 µg/mL for Gram-negative. Extracts did not affect in vitro cell viability, with values near 100% in all concentrations tested. RESULTS seem show that CS is a safe source of natural antioxidants with antifungal and antibacterial activity and no cytotoxicity, with potential usefulness for cosmetic applications.

  10. DSC, FT-IR, NIR, NIR-PCA and NIR-ANOVA for determination of chemical stability of diuretic drugs: impact of excipients

    Directory of Open Access Journals (Sweden)

    Gumieniczek Anna

    2018-03-01

    Full Text Available It is well known that drugs can directly react with excipients. In addition, excipients can be a source of impurities that either directly react with drugs or catalyze their degradation. Thus, binary mixtures of three diuretics, torasemide, furosemide and amiloride with different excipients, i.e. citric acid anhydrous, povidone K25 (PVP, magnesium stearate (Mg stearate, lactose, D-mannitol, glycine, calcium hydrogen phosphate anhydrous (CaHPO4 and starch, were examined to detect interactions. High temperature and humidity or UV/VIS irradiation were applied as stressing conditions. Differential scanning calorimetry (DSC, FT-IR and NIR were used to adequately collect information. In addition, chemometric assessments of NIR signals with principal component analysis (PCA and ANOVA were applied.

  11. Gastrointestinal lipolysis of lipid-based excipients intended for the oral drug delivery of poorly water-soluble drugs

    Directory of Open Access Journals (Sweden)

    Fernandez Sylvie

    2010-07-01

    Full Text Available Labrasol® and Gelucire® 44/14 are lipid-based excipients used for the oral drug delivery of poorly water-soluble drugs. These macrogolglycerides are composed of acylglycerols and PEG esters, potential substrates of digestive lipases. We developed an in vitro method to simulate the gastrointestinal lipolysis of these excipients and to evaluate the impact of lipolysis in vivo. At the end of the gastric phase, the composition of both excipients was significantly modified underlining the importance of gastric lipolysis in vivo. We also studied the influence of excipients’ lipolysis on the solubilization of a poorly water-soluble drug, cinnarizine, in aqueous phase. Gastrointestinal lipolysis of Labrasol® was a prerequisite to maintain cinnarizine in aqueous solution, whereas the lipolysis of Gelucire® 44/14 did not affect the cinnarizine solubilization.

  12. Enablement of the direct analysis of excipients in monoclonal antibody formulations through the incorporation of a wide pore C18 protein trap with hydrophilic interaction liquid chromatography.

    Science.gov (United States)

    Huang, Jason Z; Lin, Shujie; Huang, Zongyun; Bolgar, Mark S

    2017-11-15

    Establishing and maintaining the correct formulation composition is essential for ensuring the stability of biopharmaceutical drug products. A barrier to the routine assessment of excipient concentration is the lack of convenient and robust methods for the direct analysis of solutions containing high protein concentrations. To address this need an HPLC method was developed utilizing a wide-pore C18 guard column to trap proteins in-line with a hydrophilic interaction liquid chromatographic column to separate excipients. This method allows for a simple and direct analysis of excipients such as amino acids, carboxylic acids, simple carbohydrates, and inorganic ions across multiple drug formulations and process streams containing different therapeutic antibodies. The method was successfully validated for specificity, precision, accuracy, linearity, and robustness. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Study on Chinese herbal medicine active ingredients labelled with tritium

    International Nuclear Information System (INIS)

    Dong Mo; Bao Guangliang

    2008-01-01

    Chinese medicinal herb active ingredients was labeled with triteium by using exchange of new synthesized tritiated water or exchange of low-pressure gas-liquid. The active ingredients was Genipin, acetylalkannin and chlorogenic acid .The radiochemical purity of the three labeled compounds were more than 95% after TLC and HPLC purification. The specific activities of tritium labeled-genipin, acetylalkannin and chlorogenic acid were 5.97, 3.24 and 470 GBq/g, respectively. The results indicated that the unstable Chinese medicinal herb active ingredients could be labeled with tritium by the methods of exchange of new synthesized tritiated water and exchange of low-pressure gas-liquid. (authors)

  14. Polymer coating of carrier excipients modify aerosol performance of adhered drugs used in dry powder inhalation therapy.

    Science.gov (United States)

    Traini, Daniela; Scalia, Santo; Adi, Handoko; Marangoni, Elisabetta; Young, Paul M

    2012-11-15

    The potential of excipient coating to enhance aerosol performance of micronized drugs in carrier excipient-drug blends, used in dry powder inhalers, was investigated. Both EC (ethyl cellulose) and PVP (polyvinylpyrrolidone) were used as coating agents. Carriers were prepared via sieve fractioning followed by spray drying, with and without polymer additive. Each uncoated and coated carrier salbutamol sulphate (SS) blended systems were evaluated for particle size, morphology, drug carrier adhesion and aerosolisation performance, after blending and storage for 24h. All carrier-based systems prepared had similar particle sizes and morphologies. The surface chemistries of the carriers were significantly different, as was drug-carrier adhesion and aerosolisation performance. Particle adhesion between SS and aerosol performance (fine particle fraction; FPF) followed the rank: PVP coated>un-coated>EC coated lactose. This rank order could be attributed to the surface energy measured by contact goniometry and related to the chemistry of lactose and each polymer. Storage did not significantly affect aerosol performance, however a rank increase in mean FPF value was observed for uncoated and EC coated lactose. Finally, the net electrostatic charge across the aerosol cloud indicated that the EC coated lactose transferred less charge to SS particles. The performance of each carrier system could be attributed to the carrier surface chemistry and, in general, by careful selection of the coating polymer, drug-carrier adhesion, electrostatic charge and aerosol performance could be controlled. Copyright © 2012 Elsevier B.V. All rights reserved.

  15. Physicochemical and Antimicrobial Properties of Cocoa Pod Husk Pectin Intended as a Versatile Pharmaceutical Excipient and Nutraceutical

    Directory of Open Access Journals (Sweden)

    Ofosua Adi-Dako

    2016-01-01

    Full Text Available The physicochemical and antimicrobial properties of cocoa pod husk (CPH pectin intended as a versatile pharmaceutical excipient and nutraceutical were studied. Properties investigated include pH, moisture content, ash values, swelling index, viscosity, degree of esterification (DE, flow properties, SEM, FTIR, NMR, and elemental content. Antimicrobial screening and determination of MICs against test microorganisms were undertaken using agar diffusion and broth dilution methods, respectively. CPH pectin had a DE of 26.8% and exhibited good physicochemical properties. Pectin had good microbiological quality and exhibited pseudoplastic, shear thinning behaviour, and high swelling capacity in aqueous media. The DE, FTIR, and NMR results were similar to those of previous studies and supported highly acetylated low methoxy pectin. CPH pectin was found to be a rich source of minerals and has potential as a nutraceutical. Pectin showed dose-dependent moderate activity against gram positive and gram negative microorganisms but weak activity against Listeria spp. and A. niger. The MICs of pectin ranged from 0.5 to 4.0 mg/mL, with the highest activity against E. coli and S. aureus (MIC: 0.5–1.0 mg/mL and the lowest activity against A. niger (MIC: 2.0–4.0 mg/mL. The study has demonstrated that CPH pectin possesses the requisite properties for use as a nutraceutical and functional pharmaceutical excipient.

  16. Supersaturating drug delivery systems: effect of hydrophilic cyclodextrins and other excipients on the formation and stabilization of supersaturated drug solutions.

    Science.gov (United States)

    Brewster, M E; Vandecruys, R; Verreck, G; Peeters, J

    2008-03-01

    Supersaturating drug delivery systems (SDDS) utilize two important design elements in their preparation including converting the drug of interest into a high energy state or other rapidly dissolving form to facilitate the formation of supersaturated drug solutions and providing a means for stabilizing the formed supersaturated solution such that significant drug absorption is possible from the gastrointestinal tract. This has been referred to as a "spring" and "parachute" approach. The current effort is designed to assess materials which may affect properties in SDDS. To this end, a series of excipients was tested in a co-solvent/solvent quench method to assess their ability to attain and maintain supersaturation for a group of 14 drug development candidates. The approach focussed on hydrophilic cyclodextrins including hydroxypropyl-beta-cyclodextrin (HPbetaCD) and sulfobutyl-beta-cyclodextrin (SBEbetaCD). Various rheological polymers and surfactants were also included in the study. Consistent with previous investigations, the pharmaceutical polymers, as a class, had minimal effects on the extent of supersaturation but tended to be good stabilizers while the surfactants tended to provide for the greatest degree of supersaturation but the formed systems were poorly stable. This study found that hydrophilic cyclodextrins, especially SBEbetaCD, gave superior results in terms of attaining and maintaining supersaturation. A knowledge of the behavior and performance of excipients in this context can be useful in designing solid oral dosage forms for difficult-to-formulate drugs and drug candidates.

  17. Performance of Combination Drug and Hygroscopic Excipient Submicrometer Particles from a Softmist Inhaler in a Characteristic Model of the Airways

    Science.gov (United States)

    Longest, P. Worth; Tian, Geng; Li, Xiang; Son, Yoen-Ju; Hindle, Michael

    2012-01-01

    Excipient enhanced growth (EEG) of inhaled submicrometer pharmaceutical aerosols is a recently proposed method intended to significantly reduce extrathoracic deposition and improve lung delivery. The objective of this study was to evaluate the size increase of combination drug and hygroscopic excipient particles in a characteristic model of the airways during inhalation using both in vitro experiments and CFD simulations. The airway model included a characteristic mouth-throat (MT) and upper tracheobronchial (TB) region through the third bifurcation (B3) and was enclosed in a chamber geometry used to simulate the thermodynamic conditions of the lungs. Both in vitro results and CFD simulations were in close agreement and indicated that EEG delivery of combination submicrometer particles could nearly eliminate MT deposition for inhaled pharmaceutical aerosols. Compared with current inhalers, the proposed delivery approach represents a 1–2 order of magnitude reduction in MT deposition. Transient inhalation was found to influence the final size of the aerosol based on changes in residence times and relative humidity values. Aerosol sizes following EEG when exiting the chamber (2.75–4.61 μm) for all cases of initial submicrometer combination particles were equivalent to or larger than many conventional pharmaceutical aerosols that frequently have MMADs in the range of 2–3 μm. PMID:22820981

  18. Physicochemical and Antimicrobial Properties of Cocoa Pod Husk Pectin Intended as a Versatile Pharmaceutical Excipient and Nutraceutical

    Science.gov (United States)

    Adi-Dako, Ofosua; Frimpong Manso, Samuel; Boakye-Gyasi, Mariam EL; Sasu, Clement; Pobee, Mike

    2016-01-01

    The physicochemical and antimicrobial properties of cocoa pod husk (CPH) pectin intended as a versatile pharmaceutical excipient and nutraceutical were studied. Properties investigated include pH, moisture content, ash values, swelling index, viscosity, degree of esterification (DE), flow properties, SEM, FTIR, NMR, and elemental content. Antimicrobial screening and determination of MICs against test microorganisms were undertaken using agar diffusion and broth dilution methods, respectively. CPH pectin had a DE of 26.8% and exhibited good physicochemical properties. Pectin had good microbiological quality and exhibited pseudoplastic, shear thinning behaviour, and high swelling capacity in aqueous media. The DE, FTIR, and NMR results were similar to those of previous studies and supported highly acetylated low methoxy pectin. CPH pectin was found to be a rich source of minerals and has potential as a nutraceutical. Pectin showed dose-dependent moderate activity against gram positive and gram negative microorganisms but weak activity against Listeria spp. and A. niger. The MICs of pectin ranged from 0.5 to 4.0 mg/mL, with the highest activity against E. coli and S. aureus (MIC: 0.5–1.0 mg/mL) and the lowest activity against A. niger (MIC: 2.0–4.0 mg/mL). The study has demonstrated that CPH pectin possesses the requisite properties for use as a nutraceutical and functional pharmaceutical excipient. PMID:27066294

  19. Molecular Factors Governing the Liquid and Glassy States Recrystallization of Celecoxib in Binary Mixtures with Excipients of Different Molecular Weights.

    Science.gov (United States)

    Grzybowska, K; Chmiel, K; Knapik-Kowalczuk, J; Grzybowski, A; Jurkiewicz, K; Paluch, M

    2017-04-03

    Transformation of poorly water-soluble crystalline pharmaceuticals to the amorphous form is one of the most promising strategies to improve their oral bioavailability. Unfortunately, the amorphous drugs are usually thermodynamically unstable and may quickly return to their crystalline form. A very promising way to enhance the physical stability of amorphous drugs is to prepare amorphous compositions of APIs with certain excipients which can be characterized by significantly different molecular weights, such as polymers, acetate saccharides, and other APIs. By using different experimental techniques (broadband dielectric spectroscopy, differential scanning calorimetry, X-ray diffraction) we compare the effect of adding the large molecular weight polymer-polyvinylpyrrolidone (PVP K30)-and the small molecular weight excipient-octaacetylmaltose (acMAL)-on molecular dynamics as well as the tendency to recrystallization of the amorphous celecoxib (CEL) in the amorphous solid dispersions: CEL-PVP and CEL-acMAL. The physical stability investigations of the binary systems were performed in both the supercooled liquid and glassy states. We found that acMAL is a better inhibitor of recrystallization of amorphous CEL than PVP K30 deep in the glassy state (T T g ). We discuss molecular factors governing the recrystallization of amorphous CEL in examined solid dispersions.

  20. Evaluation of co-processed excipients used for direct compression of orally disintegrating tablets (ODT) using novel disintegration apparatus.

    Science.gov (United States)

    Brniak, Witold; Jachowicz, Renata; Krupa, Anna; Skorka, Tomasz; Niwinski, Krzysztof

    2013-01-01

    The compendial method of evaluation of orodispersible tablets (ODT) is the same disintegration test as for conventional tablets. Since it does not reflect the disintegration process in the oral cavity, alternative methods are proposed that are more related to in vivo conditions, e.g. modified dissolution paddle apparatus, texture analyzer, rotating shaft apparatus, CCD camera application, or wetting time and water absorption ratio measurement. In this study, three different co-processed excipients for direct compression of orally disintegrating tablets were compared (Ludiflash, Pharmaburst, F-Melt). The properties of the prepared tablets such as tensile strength, friability, wetting time and water absorption ratio were evaluated. Disintegration time was measured using the pharmacopoeial method and the novel apparatus constructed by the authors. The apparatus was based on the idea of Narazaki et al., however it has been modified. Magnetic resonance imaging (MRI) was applied for the analysis of the disintegration mechanism of prepared tablets. The research has shown the significant effect of excipients, compression force, temperature, volume and kind of medium on the disintegration process. The novel apparatus features better correlation of disintegration time with in vivo results (R(2) = 0.9999) than the compendial method (R(2) = 0.5788), and presents additional information on the disintegration process, e.g. swelling properties.

  1. Guidelines for cleanup of uranium tailings from inactive mills

    International Nuclear Information System (INIS)

    Goldsmith, W.A.; Haywood, F.F.; Jacobs, D.G.

    1975-01-01

    Recent experiences in Grand Junction, Colorado, have indicated the significance of uranium tailings as sources of nonoccupational exposure and suggest that current methods for perpetual care and isolation of the large areas covered by tailings piles at inactive mill locations may be inadequate for minimizing human exposure. This paper presents the rationale and the procedures used in reviewing the adequacy of proposed criteria for remedial action at these sites. Exposures due to aquatic, terrestrial, airborne, and direct contamination pathways were compared to determine the most important radionuclides in the pile and their pathways to man. It is shown that the most hazardous components of the tailings are 226 Ra and 230 Th. The long half-lives of these radionuclides require the consideration of continuous occupancy of the vacated site at some future time, even if the immediately projected land use does not anticipate maximum exposure

  2. [Physical inactivity in Galicia (Spain): trends and the impact of changes in the definition].

    Science.gov (United States)

    Pérez-Ríos, Mónica; Santiago-Pérez, María I; Rodríguez-Camacho, Elena; Malvar, Alberto; Suanzes, Jorge; Hervada, Xurxo

    2015-01-01

    To estimate the prevalence of physical inactivity during leisure time in Galicia (Spain) between 2007 and 2011 and to assess the impact of including non-leisure time activities in the definition of physical inactivity. A cross-sectional study was conducted in the population aged 16 years and older (n=19,235). Physical activity was assessed by the Minnesota Questionnaire. In 2011, inactivity was estimated by including daily activities. Between 2007 and 2011, the prevalence of inactivity in Galicia remained stable (p=0.249) and close to 50%. This prevalence was higher among women and those who worked or were in education. Inactivity decreased from 47% to 16% when non-leisure time activities were included in the definition. Between 2007 and 2011 in Galicia, the prevalence of inactivity remained high and stable. This prevalence was significantly decreased when non-leisure time activities were included in the definition. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

  3. Low postprandial circulating inactive ghrelin: role of early satiety in undernourished children.

    Science.gov (United States)

    Najib, Khadijehsadat; Moghtaderi, Mozhgan; Farjadian, Shirin; Falahzadeh, Ebrahim

    2014-11-01

    To determine difference in the levels of circulating inactive ghrelin between undernourished and healthy children. The present cross-sectional study was conducted in undernourished children from southwestern Iran, from July 2011 through July 2012. Postprandial inactive ghrelin levels were measured in 40 undernourished children and sex- and age-matched healthy controls by enzyme immunoassay. The levels of postprandial inactive ghrelin were considerably lower in undernourished compared to the healthy children (6.4 vs. 12.9, P < 0.001). Among the undernourished children, the level of inactive ghrelin was significantly lower in girls than in boys (5.8 vs. 7.1, P = 0.032). Thus, the levels of inactive ghrelin was found to be low in undernourished children compared to healthy children. Early loss of appetite might be a result of low circulating inactive ghrelin levels in the postprandial state in undernourished children.

  4. Calculating a checksum with inactive networking components in a computing system

    Science.gov (United States)

    Aho, Michael E; Chen, Dong; Eisley, Noel A; Gooding, Thomas M; Heidelberger, Philip; Tauferner, Andrew T

    2014-12-16

    Calculating a checksum utilizing inactive networking components in a computing system, including: identifying, by a checksum distribution manager, an inactive networking component, wherein the inactive networking component includes a checksum calculation engine for computing a checksum; sending, to the inactive networking component by the checksum distribution manager, metadata describing a block of data to be transmitted by an active networking component; calculating, by the inactive networking component, a checksum for the block of data; transmitting, to the checksum distribution manager from the inactive networking component, the checksum for the block of data; and sending, by the active networking component, a data communications message that includes the block of data and the checksum for the block of data.

  5. 21 CFR 347.12 - Astringent active ingredients.

    Science.gov (United States)

    2010-04-01

    ... contains 0.13 to 0.5 percent aluminum acetate). (b) Aluminum sulfate, 46 to 63 percent (the concentration... following within the specified concentration established for each ingredient: (a) Aluminum acetate, 0.13 to...

  6. 21 CFR 347.20 - Permitted combinations of active ingredients.

    Science.gov (United States)

    2010-04-01

    ... ingredients to prepare an aluminum acetate solution. Aluminum sulfate tetradecahydrate may be combined with calcium acetate monohydrate in powder or tablet form to provide a 0.13 to 0.5 percent aluminum acetate...

  7. Natural ingredients based cosmetics. Content of selected fragrance sensitizers

    DEFF Research Database (Denmark)

    Rastogi, Suresh Chandra; Johansen, J D; Menné, T

    1996-01-01

    In the present study, we have investigated 42 cosmetic products based on natural ingredients for content of 11 fragrance substances: geraniol, hydroxycitronellal, eugenol, isoeugenol, cinnamic aldehyde, cinnamic alcohol, alpha-amylcinnamic aldehyde, citral, coumarin, dihydrocoumarin and alpha...

  8. 21 CFR 701.3 - Designation of ingredients.

    Science.gov (United States)

    2010-04-01

    ... § 720.8(a) of this chapter, in lieu of label declaration of identity the phrase “and other ingredients... brand designation, and no trade name or brand designation not common to all such products appears in the...

  9. Linking Geology and Microbiology: Inactive Pockmarks Affect Sediment Microbial Community Structure

    OpenAIRE

    Haverkamp, Thomas H. A.; Hammer, Øyvind; Jakobsen, Kjetill S.

    2014-01-01

    Pockmarks are geological features that are found on the bottom of lakes and oceans all over the globe. Some are active, seeping oil or methane, while others are inactive. Active pockmarks are well studied since they harbor specialized microbial communities that proliferate on the seeping compounds. Such communities are not found in inactive pockmarks. Interestingly, inactive pockmarks are known to have different macrofaunal communities compared to the surrounding sediments. It is undetermined...

  10. Association between Natural Resources for OutdoorActivities and Physical Inactivity

    Data.gov (United States)

    U.S. Environmental Protection Agency — it includes available natural resources for outdoor activities, Physical inactivity and households income. This dataset is associated with the following publication:...

  11. Burden of physical inactivity and hospitalization costs due to chronic diseases

    Science.gov (United States)

    Bielemann, Renata Moraes; da Silva, Bruna Gonçalves Cordeiro; Coll, Carolina de Vargas Nunes; Xavier, Mariana Otero; da Silva, Shana Ginar

    2015-01-01

    OBJECTIVE To evaluate the physical inactivity-related inpatient costs of chronic non-communicable diseases. METHODS This study used data from 2013, from Brazilian Unified Health System, regarding inpatient numbers and costs due to malignant colon and breast neoplasms, cerebrovascular diseases, ischemic heart diseases, hypertension, diabetes, and osteoporosis. In order to calculate the share physical inactivity represents in that, the physical inactivity-related risks, which apply to each disease, were considered, and physical inactivity prevalence during leisure activities was obtained from Pesquisa Nacional por Amostra de Domicílio (Brazil’s National Household Sample Survey). The analysis was stratified by genders and residing country regions of subjects who were 40 years or older. The physical inactivity-related hospitalization cost regarding each cause was multiplied by the respective share it regarded to. RESULTS In 2013, 974,641 patients were admitted due to seven different causes in Brazil, which represented a high cost. South region was found to have the highest patient admission rate in most studied causes. The highest prevalences for physical inactivity were observed in North and Northeast regions. The highest inactivity-related share in men was found for osteoporosis in all regions (≈ 35.0%), whereas diabetes was found to have a higher share regarding inactivity in women (33.0% to 37.0% variation in the regions). Ischemic heart diseases accounted for the highest total costs that could be linked to physical inactivity in all regions and for both genders, being followed by cerebrovascular diseases. Approximately 15.0% of inpatient costs from Brazilian Unified Health System were connected to physical inactivity. CONCLUSIONS Physical inactivity significantly impacts the number of patient admissions due to the evaluated causes and through their resulting costs, with different genders and country regions representing different shares. PMID:26487291

  12. Burden of physical inactivity and hospitalization costs due to chronic diseases

    Directory of Open Access Journals (Sweden)

    Renata Moraes Bielemann

    2015-01-01

    Full Text Available OBJECTIVE To evaluate the physical inactivity-related inpatient costs of chronic non-communicable diseases.METHODS This study used data from 2013, from Brazilian Unified Health System, regarding inpatient numbers and costs due to malignant colon and breast neoplasms, cerebrovascular diseases, ischemic heart diseases, hypertension, diabetes, and osteoporosis. In order to calculate the share physical inactivity represents in that, the physical inactivity-related risks, which apply to each disease, were considered, and physical inactivity prevalence during leisure activities was obtained from Pesquisa Nacional por Amostra de Domicílio(Brazil's National Household Sample Survey. The analysis was stratified by genders and residing country regions of subjects who were 40 years or older. The physical inactivity-related hospitalization cost regarding each cause was multiplied by the respective share it regarded to.RESULTS In 2013, 974,641 patients were admitted due to seven different causes in Brazil, which represented a high cost. South region was found to have the highest patient admission rate in most studied causes. The highest prevalences for physical inactivity were observed in North and Northeast regions. The highest inactivity-related share in men was found for osteoporosis in all regions (≈ 35.0%, whereas diabetes was found to have a higher share regarding inactivity in women (33.0% to 37.0% variation in the regions. Ischemic heart diseases accounted for the highest total costs that could be linked to physical inactivity in all regions and for both genders, being followed by cerebrovascular diseases. Approximately 15.0% of inpatient costs from Brazilian Unified Health System were connected to physical inactivity.CONCLUSIONS Physical inactivity significantly impacts the number of patient admissions due to the evaluated causes and through their resulting costs, with different genders and country regions representing different shares.

  13. Circumnuclear Dust in Nearby Active and Inactive Galaxies. I. Data

    Science.gov (United States)

    Martini, Paul; Regan, Michael W.; Mulchaey, John S.; Pogge, Richard W.

    2003-06-01

    The detailed morphology of the interstellar medium (ISM) in the central kiloparsec of galaxies is controlled by pressure and gravitation. The combination of these forces shapes both circumnuclear star formation and the growth of the central, supermassive black hole. We present visible and near-infrared Hubble Space Telescope images and color maps of 123 nearby galaxies that show the distribution of the cold ISM, as traced by dust, with excellent spatial resolution. These observations reveal that nuclear dust spirals are found in the majority of active and inactive galaxies and they possess a wide range in coherence, symmetry, and pitch angle. We have used this large sample to develop a classification system for circumnuclear dust structures. In spite of the heterogeneous nature of the complete sample, we only find symmetric, two-arm nuclear dust spirals in galaxies with large-scale bars, and these dust lanes clearly connect to dust lanes along the leading edges of the large-scale bars. Not all dust lanes along large-scale bars form two-arm spirals, however, and several instead end in nuclear rings. We find that tightly wound, or low pitch angle, nuclear dust spirals are more common in unbarred galaxies than barred galaxies. Finally, the extended narrow-line region in several of the active galaxies is well resolved. The connection between the ionized gas and circumnuclear dust lanes in four of these galaxies provides additional evidence that a significant fraction of their extended narrow-line region is ambient gas photoionized in situ by the active nucleus. In a future paper we will use our classification system for circumnuclear dust to identify differences between active and inactive galaxies, as well as barred and unbarred galaxies, in well-matched subsamples of these data. Based on observations with the NASA/ESA Hubble Space Telescope obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in

  14. Condensational Growth of Combination Drug-Excipient Submicrometer Particles for Targeted High Efficiency Pulmonary Delivery: Comparison of CFD Predictions with Experimental Results

    Science.gov (United States)

    Hindle, Michael

    2011-01-01

    Purpose The objective of this study was to investigate the hygroscopic growth of combination drug and excipient submicrometer aerosols for respiratory drug delivery using in vitro experiments and a newly developed computational fluid dynamics (CFD) model. Methods Submicrometer combination drug and excipient particles were generated experimentally using both the capillary aerosol generator and the Respimat inhaler. Aerosol hygroscopic growth was evaluated in vitro and with CFD in a coiled tube geometry designed to provide residence times and thermodynamic conditions consistent with the airways. Results The in vitro results and CFD predictions both indicated that the initially submicrometer particles increased in mean size to a range of 1.6–2.5 µm for the 50:50 combination of a non-hygroscopic drug (budesonide) and different hygroscopic excipients. CFD results matched the in vitro predictions to within 10% and highlighted gradual and steady size increase of the droplets, which will be effective for minimizing extrathoracic deposition and producing deposition deep within the respiratory tract. Conclusions Enhanced excipient growth (EEG) appears to provide an effective technique to increase pharmaceutical aerosol size, and the developed CFD model will provide a powerful design tool for optimizing this technique to produce high efficiency pulmonary delivery. PMID:21948458

  15. Condensational growth of combination drug-excipient submicrometer particles for targeted high efficiency pulmonary delivery: comparison of CFD predictions with experimental results.

    Science.gov (United States)

    Longest, P Worth; Hindle, Michael

    2012-03-01

    The objective of this study was to investigate the hygroscopic growth of combination drug and excipient submicrometer aerosols for respiratory drug delivery using in vitro experiments and a newly developed computational fluid dynamics (CFD) model. Submicrometer combination drug and excipient particles were generated experimentally using both the capillary aerosol generator and the Respimat inhaler. Aerosol hygroscopic growth was evaluated in vitro and with CFD in a coiled tube geometry designed to provide residence times and thermodynamic conditions consistent with the airways. The in vitro results and CFD predictions both indicated that the initially submicrometer particles increased in mean size to a range of 1.6-2.5 μm for the 50:50 combination of a non-hygroscopic drug (budesonide) and different hygroscopic excipients. CFD results matched the in vitro predictions to within 10% and highlighted gradual and steady size increase of the droplets, which will be effective for minimizing extrathoracic deposition and producing deposition deep within the respiratory tract. Enhanced excipient growth (EEG) appears to provide an effective technique to increase pharmaceutical aerosol size, and the developed CFD model will provide a powerful design tool for optimizing this technique to produce high efficiency pulmonary delivery.

  16. Characterisation of a novel, multifunctional, co-processed excipient and its effect on release profile of paracetamol from tablets prepared by direct compression

    Directory of Open Access Journals (Sweden)

    Sylvester Okhuelegbe Eraga

    2015-09-01

    Conclusions: The drug-excipient ratios of 1:3 and 1:4 gave pharmaceutically acceptable tablets that met the British Pharmacopoeia specifications. The t50% value of the 1:4 batch of tablets may find its usefulness in formulating drugs for which a fast onset of action is desired.

  17. [A CASE OF ANAPHYLAXIS IN THE PEDIATRIC PATIENT WITH MILK ALLERGY DUE TO TRACES OF MILK PROTEIN IN THE LACTOSE USED AS AN EXCIPIENT OF INAVIR INHALATION].

    Science.gov (United States)

    Morikawa, Miki; Kanemitsu, Yoshitomi; Tsukamoto, Hiroki; Morikawa, Akimasa; Tomioka, Yoshihisa

    2016-05-01

    The patient was a 6-year-old female with milk allergy and persistent asthma. She experienced anaphylactic reactions just after the inhalation of Inavir (Laninamivir Octanoate Hydrate) to treat flu infection. A skin-prick test showed positive reactions for Inavir inhaler powder and lactose used as an excipient but negative for Laninamivir. Same results were obtained in a drug-stimulated basophil activation test. The lactose excipient in Inavir inhaler powder was supposed to contain milk proteins, which caused anaphylactic reactions. To test this possibility, we examined the contamination of allergic milk proteins in the lactose excipient and found the smear band by silver staining, which was identified as β-lactoglobulin (β-LG) by Western blotting using specific monoclonal antibody and patient's sera. The β-LG in Inavir was supposed to be glycosylated with lactose because the molecular weight was slightly higher than β-LG standard reference as seen in mobility. In fact, the incubation with lactose in vitro tended to increase molecular weight. Following these results, we herein report that the trace amounts of β-LG contaminated in the lactose excipient of Inavir could cause immediate allergic reactions. The risk that the lactose-containing dry powder inhalers cause allergic reactions for patients with cow's milk allergy need to be reminded. In particular, the use for flu patients should be paid careful attention because of increased airway hypersensitivity in those patients.

  18. A new generation of starch products as excipient in pharmaceutical tablets .1. Preparation and binding properties of high surface area potato starch products

    NARCIS (Netherlands)

    Wierik, GHPT; ArendsScholte, AW; Eissens, AC; Lerk, CF

    1996-01-01

    A new pharmaceutical excipient with a high binding capacity was prepared from potato starch by enzymatic degradation, followed by suitable dehydration of the precipitated and filtered retrograded starch to produce high specific surface area products. Thermal dehydration methods like drying at room

  19. Lactose in dairy ingredients: Effect on processing and storage stability.

    Science.gov (United States)

    Huppertz, Thom; Gazi, Inge

    2016-08-01

    Lactose is the main carbohydrate in the milk of most species. It is present in virtually all dry dairy ingredients, with levels ranging from lactose powders. The presence of lactose has a strong effect on ingredient processing and stability. Lactose can negatively influence powder properties and lead to undesirable effects, such as the stickiness of powder resulting in fouling during drying, or caking and related phenomena during storage. In addition, being a reducing carbohydrate, lactose can also participate in the Maillard reaction with free amino groups of proteins, peptides, and free AA. In this review, the influence of the presence (or absence) of lactose on physiochemical properties of dairy ingredients is reviewed, with particular emphasis on behavior during processing and storage. Particularly important features in this respect are whether lactose is in the (glassy) amorphous phase or in the crystalline phase, which is strongly affected by precrystallization conditions (e.g., in lactose, permeate, and whey powders) and by drying conditions. Furthermore, the moisture content and water activity of the ingredients are important parameters to consider, as they determine both mobility and reactivity, influencing Maillard reactions and concomitant browning, the crystallization of amorphous lactose during storage of dairy ingredients, glass transitions temperatures, and associated stickiness and caking phenomena. For the stickiness and caking, a crucial aspect to take into account is powder particle surface composition in relation to the bulk powder. Lactose is typically underrepresented at the powder surface, as a result of which deviations between observed lactose-induced caking and stickiness temperatures, and determined glass transition temperatures arise. By considering lactose as an integral part of ingredient composition along with all other compositional and environmental properties, lactose behavior in dairy ingredients can be understood, controlled, and

  20. Ingredients derived from the slaughter of bovines in dog food

    Directory of Open Access Journals (Sweden)

    Karina De Carli Loureiro

    Full Text Available ABSTRACT: This study evaluated the nutritional levels, apparent digestibility coefficients, and faecal characteristics of dogs fed with four by-products from bovine slaughter: testicles, residue sirloin steak, trachea, and liver. Ingredients were processed and packed in tins for heat treatment in autoclaves. For the digestibility and faeces quality, ingredients were mixed with a reference diet (commercial food in the proportion of 30g kg-1 test ingredient and 70g kg-1 reference diet (as dry matter. Ten adult dogs were distributed in double Latin block squares (5x5 with five treatments and five periods, totalling ten repetitions per treatment. The residue sirloin steak presented the highest levels of essential (414.2g kg-1 of dry matter and non-essential (399.0g kg-1 of dry matter amino acids in tested ingredients. No differences (P>0.05 were observed in apparent digestibility coefficients of dry matter - ADCDM (907g kg-1, ADCOM (930g kg-1, ADCCP (841g kg-1, ADCAEE (954g kg-1 values, and DE (5069kcal kg-1 and ME (4781kcal kg-1 values between testicle, residue sirloin steak, and liver. The trachea presented lower digestibility and energy values (digestible and metabolizable than the other ingredients. This lower trachea digestibility resulted in higher faecal volume for natural and dry matter (P0.05 in faecal score between ingredients. Ingredients tested in this study can be used in feeds for adult dogs; however, their nutritional levels and digestibility values should be considered for correct diet balance.

  1. Radioactive spheres without inactive wall for lesion simulation in PET

    International Nuclear Information System (INIS)

    Bazanez-Borgert, M.; Bundschuh, R.A.; Herz, M.; Martinez, M.J.; Schwaiger, M.; Ziegler, S.I.

    2008-01-01

    With the growing importance of PET and PET/CT in diagnosis, staging, therapy monitoring and radiotherapy planning, appropriate tools to simulate lesions in phantoms are important. Normally hollow spheres, made of plastic or glass, which can be filled with radioactive solutions, are used. As these spheres have an inactive wall they do not reflect the real situation in the patient and lead to quantification errors in the presence of background activity. We propose spheres made of radioactive wax, which are easy to produce, give a high flexibility to the user and a more accurate quantification. These wax spheres were evaluated for their applicability in PET phantoms and it was found that the activity is not diffusing into the surrounding water in relevant quantities, that they show a sufficient homogeneity, and that their attenuation properties are equivalent to water for photons of PET energies. Recovery coefficients for the wax spheres were measured and compared with those obtained for fillable plastic spheres for diameters of 28, 16, 10, and 6 mm in the presence of background activity. Recovery coefficients of the wax spheres were found to be up to 21% higher than for the fillable spheres. (orig.)

  2. Physical Activity, Inactivity and Health During Youth-2016.

    Science.gov (United States)

    Rowlands, Alex V

    2017-02-01

    2016 has been an exciting year for research in physical activity, inactivity and health. Recognition of the importance of all physical behaviors (physical activity, sedentary time and sleep) across the 24-hr day continues to grow. Notable advances have included: applications of recent methodological innovations that account for the codependence of the behaviors in the finite 24-hr period showing that the balance of these behaviors is associated with health; methodological innovations focusing on the classification of behaviors and/or quantification of the 24-hr diurnal activity pattern; and a series of systematic reviews that helped provide the evidence base for the release of the innovative 24-hr movement guidelines earlier this year. This commentary focuses on just two of these papers: the first by Goldsmith and colleagues who demonstrate a new statistical method that exploits the time series nature of accelerometer data facilitating new insights into time-specific determinants of children's activity patterns and associations with health; the second by Tremblay and colleagues who describe the evidence base for associations between each physical behavior and children's health, the emerging evidence base for associations between the balance of behaviors and health, and development of the world's first 24-hr movement guidelines.

  3. Physical inactivity, neurological disability, and cardiorespiratory fitness in multiple sclerosis.

    Science.gov (United States)

    Motl, R W; Goldman, M

    2011-02-01

    We examined the associations among physical activity, neurological disability, and cardiorespiratory fitness in two studies of individuals with multiple sclerosis (MS). Study 1 included 25 women with relapsing-remitting MS (RRMS) who undertook an incremental exercise test for measuring peak oxygen (VO₂(peak) ) consumption, wore an accelerometer during a 7-day period, and completed the Godin Leisure-Time Exercise Questionnaire (GLTEQ). Study 2 was a follow-up of Study 1 and included 24 women with RRMS who completed the self-reported Expanded Disability Status Scale (EDSS), undertook an incremental exercise test, wore an accelerometer during a 7-day period, and completed the GLTEQ. Study 1 indicated that VO₂(peak) was significantly correlated with accelerometer counts (pr = 0.69) and GLTEQ scores (pr = 0.63) even after controlling for age and MS duration. Study 2 indicated that VO₂(peak) was significantly correlated with accelerometer counts (pr = 0.50), GLTEQ scores (pr = 0.59), and EDSS scores (pr = -0.43) even after controlling for age and MS duration; there was a moderate partial correlation between accelerometer counts and EDSS scores (pr = -0.43). Multiple linear regression analysis indicated that both accelerometer counts (β = 0.32) and EDSS scores (β = -0.40) had statistically significant associations with VO₂(peak). The findings indicate that physical inactivity and neurological disability might represent independent risk factors for reduced levels of cardiorespiratory fitness in this population. © 2010 John Wiley & Sons A/S.

  4. Home Delivery Medicament Program: access, inactivity and cardiovascular risk.

    Science.gov (United States)

    Araújo, Roque da Silva; Arcuri, Edna Apparecida Moura; Lopes, Victor Cauê

    2016-10-10

    to verify causes of inactivity in the Home Delivery Medicament Program, as referred by users from a Primary Health Care Service in São Paulo, comparing them to the causes registered in the program and analyzing them in the theoretical model Concept of Access to Health. cross-sectional study, interviewing 111 inactive users; and documentary study in the program records. half of the users did not know the condition of inactivity. Discrepancies were found between the user's and the program's information, observing different levels of agreement: Absence of physician and administrative staff member 0%; Transfer to other service 25%; Death 50%; Option to quit 50%; Address change 57% and Change in therapeutic schedule 80%. The users' feeling of accepting the program was observed. In the health access concept, inactivity can be explained in the information dimension, in the degree of asymmetry between the patient's and the health professional's knowledge, identified through the indicators: education, knowledge and information sources. due to the low education level, the user does not assimilate the information on the steps of the program flowchart, does not return for the assessment that guarantees its continuity. Consequently, (s)he stops receiving the medication and spends a long time without treatment, increasing the cardiovascular risk of hypertensive (92% of the sample), diabetic (44%) and dyslipidemic patients (31%). verificar causas de inatividade no Programa Remédio em Casa, referidas por usuários de Unidade Básica de Saúde de São Paulo, comparando-as às registradas pelo programa e analisando-as no modelo teórico Conceito de Acesso à Saúde. estudo transversal entrevistando 111 usuários inativos; e documental, nos registros do programa. metade dos usuários desconhecia a condição de inatividade. Constatadas discrepâncias nas informações usuário versus programa, observando-se diferentes níveis de concordância: Falta de médico e funcion

  5. Is the Canadian childhood obesity epidemic related to physical inactivity?

    Science.gov (United States)

    Tremblay, M S; Willms, J D

    2003-09-01

    This study examined the relation among children's physical activity, sedentary behaviours, and body mass index (BMI), while controlling for sex, family structure, and socioeconomic status. Epidemiological study examining the relations among physical activity participation, sedentary behaviour (video game use and television (TV)/video watching), and BMI on a nationally representative sample of Canadian children. A representative sample of Canadian children aged 7-11 (N=7216) from the 1994 National Longitudinal Survey of Children and Youth was used in the analysis. Physical activity and sport participation, sedentary behaviour (video game use and TV/video watching), and BMI measured by parental report. Both organized and unorganized sport and physical activity are negatively associated with being overweight (10-24% reduced risk) or obese (23-43% reduced risk), while TV watching and video game use are risk factors for being overweight (17-44% increased risk) or obese (10-61% increased risk). Physical activity and sedentary behaviour partially account for the association of high socioeconomic status and two-parent family structure with the likelihood of being overweight or obese. This study provides evidence supporting the link between physical inactivity and obesity of Canadian children.

  6. Role of excipients in hydrate formation kinetics of theophylline in wet masses studied by near-infrared spectroscopy

    DEFF Research Database (Denmark)

    Jørgensen, Anna C; Airaksinen, Sari; Karjalainen, Milja

    2004-01-01

    . Anhydrous theophylline was chosen as the hydrate-forming model drug compound and two excipients, silicified microcrystalline cellulose (SMCC) and alpha-lactose monohydrate, with different water absorbing properties, were used in formulation. An early stage of wet massing was studied with anhydrous...... theophylline and its 1:1 (w/w) mixtures with alpha-lactose monohydrate and SMCC with 0.1g/g of purified water. The changes in the state of water were monitored using near-infrared spectroscopy, and the conversion of the crystal structure was verified using X-ray powder diffraction (XRPD). SMCC decreased...... the hydrate formation rate by absorbing water, but did not inhibit it. The results suggest that alpha-lactose monohydrate slightly increased the hydrate formation rate in comparison with a mass comprising only anhydrous theophylline....

  7. The impact of particle preparation methods and polymorphic stability of lipid excipients on protein distribution in microparticles

    DEFF Research Database (Denmark)

    Liu, Jingying; Christophersen, Philip C; Yang, Mingshi

    2017-01-01

    into SLM prepared with different excipients, i.e. trimyristin (TG14), glyceryl distearate (GDS), and glyceryl monostearate (GMS), by water-oil-water (w/o/w) or solid-oil-water (s/o/w) method. The distribution of lysozyme in SLM and the release of the protein from SLM were evaluated by confocal laser...... formulated by the w/o/w method or evenly distributed in TG14 SLM prepared by the s/o/w method. Stability study at 37 °C revealed that only TG14 SLM made by the w/o/w method was able to maintain the lysozyme amount both on the particle surface and released from the SLM. Elevated storage temperature induced...

  8. Hydrodynamic size characterization of a self-emulsifying lipid pharmaceutical excipient by Taylor dispersion analysis with fluorescent detection.

    Science.gov (United States)

    Chamieh, Joseph; Jannin, Vincent; Demarne, Frédéric; Cottet, Hervé

    2016-11-20

    In this work, the sizing of microemulsion droplets of a lipid-based pharmaceutical excipient (Labrasol ® ALF) is performed by Taylor dispersion analysis (TDA) using fluorescent detection. An hydrophobic fluorescent marker is used to tag the microemulsion droplet and to increase the sensitivity of detection (compared to UV detection). Combined with the frontal TDA mode, fluorescent detection was mandatory for an accurate sizing of microemulsions containing large coacervates. Microemulsion sizing of Labrasol was performed at various concentrations from 1 to 70g.L -1 and at two different temperature (25°C and 37°C). Results obtained by TDA are compared to those derived from DLS measurements. The combination of both techniques allows estimating the size and proportion of coacervates in the microemulsion, as well as the polydispersity in size of the sample. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Oral delivery of diabetes peptides - Comparing standard formulations incorporating functional excipients and nanotechnologies in the translational context.

    Science.gov (United States)

    Lakkireddy, Harivardhan Reddy; Urmann, Matthias; Besenius, Melissa; Werner, Ulrich; Haack, Torsten; Brun, Priscilla; Alié, Jean; Illel, Brigitte; Hortala, Laurent; Vogel, Rachel; Bazile, Didier

    2016-11-15

    While some orally delivered diabetes peptides are moving to late development with standard formulations incorporating functional excipients, the demonstration of the value of nanotechnology in clinic is still at an early stage. The goal of this review is to compare these two drug delivery approaches from a physico-chemical and a biopharmaceutical standpoint in an attempt to define how nanotechnology-based products can be differentiated from standard oral dosage forms for oral bioavailability of diabetes peptides. Points to consider in a translational approach are outlined to seize the opportunities offered by a better understanding of both the intestinal barrier and of nano-carriers designed for oral delivery. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Associations of unhealthy lifestyle factors with sexual inactivity and sexual dysfunctions in Denmark

    DEFF Research Database (Denmark)

    Christensen, Birgitte S; Grønbaek, Morten; Pedersen, Bo V

    2011-01-01

    Studies have linked obesity, a sedentary lifestyle, and tobacco smoking to erectile dysfunction, but the evidence linking unhealthy lifestyle factors to other sexual dysfunctions or to sexual inactivity is conflicting.......Studies have linked obesity, a sedentary lifestyle, and tobacco smoking to erectile dysfunction, but the evidence linking unhealthy lifestyle factors to other sexual dysfunctions or to sexual inactivity is conflicting....

  11. Time course of arterial vascular adaptations to inactivity and paralyses in humans.

    NARCIS (Netherlands)

    Groot, P.C.E. de; Kuppevelt, D. van; Pons, C.; Snoek, G.V.E.; Woude, L.H.V. van der; Hopman, M.T.E.

    2003-01-01

    PURPOSE: The aim of the present study was to assess the time course of vascular adaptations to inactivity and paralyses in humans. The spinal cord-injured (SCI) population offers a unique "human model of nature" to assess peripheral vascular adaptations and its time course to extreme inactivity and

  12. Time course of arterial vascular adaptations to inactivity and paralyses in humans

    NARCIS (Netherlands)

    de Groot, P.C.E.; van Kuppevelt, D.; Pons, C.; van der Woude, L.H.V.; Hopman, M.T.E.

    2003-01-01

    Purpose: The aim of the present study was to assess the time course of vascular adaptations to inactivity and paralyses in humans. The spinal cord-injured (SCI) population offers a unique "human model of nature" to assess peripheral vascular adaptations and its time course to extreme inactivity and

  13. Childhood adversities and socioeconomic position as predictors of leisure-time physical inactivity in early adulthood

    NARCIS (Netherlands)

    Kestilä, Laura; Mäki-Opas, Tomi; Kunst, Anton E.; Borodulin, Katja; Rahkonen, Ossi; Prättälä, Ritva

    2015-01-01

    Limited knowledge exists on how childhood social, health-related and economic circumstances predict adult physical inactivity. Our aim was a) to examine how various childhood adversities and living conditions predict leisure-time physical inactivity in early adulthood and b) to find out whether

  14. Physical inactivity, abdominal obesity and risk of coronary heart disease in apparently healthy men and women

    NARCIS (Netherlands)

    Arsenault, B. J.; Rana, J. S.; Lemieux, I.; Després, J.-P.; Kastelein, J. J. P.; Boekholdt, S. M.; Wareham, N. J.; Khaw, K.-T.

    2010-01-01

    Objective: To test the hypothesis that for any given body mass index (BMI) category, active individuals would have a smaller waist circumference than inactive individuals. Our second objective was to examine the respective contribution of waist circumference and physical inactivity on coronary heart

  15. In Search of Lost Springs: A Protocol for Locating Active and Inactive Springs.

    Science.gov (United States)

    Fensham, R J; Silcock, J L; Powell, O; Habermehl, M A

    2016-05-01

    Groundwater springs are significant landscape features for humans and the biota that occupies their habitat. Many springs become inactive where groundwater exploitation by humans has lowered the water table or artesian pressure. In order to assess this impact, it is important to identify and locate active, and with more difficulty, inactive springs. Using a variety of archival, environmental and field-based data, this study presents a protocol for the determination of the location and status of springs across the Great Artesian Basin of Australia. This protocol underpins a database of springs, which is not only important for the assessment of spring ecosystems, but also contributes to understand groundwater extraction impacts and hydrogeological processes. The database indicates that 30.0% of discharge (artesian) springs in the Great Artesian Basin are entirely inactive and another 11.8% are partially inactive. For the outcrop (gravity) springs of the Basin, only 1.9% are entirely inactive and 7.4% partially inactive, and for the outcrop springs in the Tertiary sandstone overlying the Basin 30.9% are inactive and 18.2% are partially inactive. © 2015, National Ground Water Association.

  16. validity and reliability of a physical activity/inactivity questionnaire in ...

    African Journals Online (AJOL)

    of engaging in physical activity, sports or play. 3,12,15,27,39, .... and recorded to the nearest 0.1 mm. Percentage body fat was calculated using standard equations.11. Instruments. Physical activity/inactivity over a period of 7 days was as- sessed using a ..... benefits is required, particularly in children where inactivity and the ...

  17. 37 CFR 11.20 - Disciplinary sanctions; Transfer to disability inactive status.

    Science.gov (United States)

    2010-07-01

    ..., Investigations, and Proceedings § 11.20 Disciplinary sanctions; Transfer to disability inactive status. (a) Types...; Transfer to disability inactive status. 11.20 Section 11.20 Patents, Trademarks, and Copyrights UNITED... discipline exist, may impose on a practitioner the following types of discipline: (1) Exclusion from practice...

  18. Evaluation and modification of commercial dry powder inhalers for the aerosolization of a submicrometer excipient enhanced growth (EEG) formulation.

    Science.gov (United States)

    Son, Yoen-Ju; Longest, P Worth; Tian, Geng; Hindle, Michael

    2013-06-14

    The aim of this study was to evaluate and modify commercial dry powder inhalers (DPIs) for the aerosolization of a submicrometer excipient enhanced growth (EEG) formulation. The optimized device and formulation combination was then tested in a realistic in vitro mouth-throat - tracheobronchial (MT-TB) model. An optimized EEG submicrometer powder formulation, consisting of albuterol sulfate (drug), mannitol (hygroscopic excipient), l-leucine (dispersion enhancer) and poloxamer 188 (surfactant) in a ratio of 30:48:20:2 was prepared using a Büchi Nano spray dryer. The aerosolization performance of the EEG formulation was evaluated with five conventional DPIs: Aerolizer, Novolizer, HandiHaler, Exubera and Spiros. To improve powder dispersion, the HandiHaler was modified with novel mouth piece (MP) designs. The aerosol performance of each device was assessed using a next generation impactor (NGI) at airflow rates generating a pressure drop of 4 kPa across the DPI. In silico and in vitro deposition and hygroscopic growth of formulations was studied using a MT-TB airway geometry model. Both HandiHaler and Aerolizer produced high emitted doses (EDs) together with a significant submicrometer aerosol fraction. A modified HandiHaler with a MP including a three-dimensional (3D) array of rods (HH-3D) produced a submicrometer particle fraction of 38.8% with a conventional fine particle fraction (%<5 μm) of 97.3%. The mass median diameter (MMD) of the aerosol was reduced below 1 μm using this HH-3D DPI. The aerosol generated from the modified HandiHaler increased to micrometer size (2.8 μm) suitable for pulmonary deposition, when exposed to simulated respiratory conditions, with negligible mouth-throat (MT) deposition (2.6%). Copyright © 2013 Elsevier B.V. All rights reserved.

  19. Evaluation and Modification of Commercial Dry Powder Inhalers for the Aerosolization of a Submicrometer Excipient Enhanced Growth (EEG) Formulation

    Science.gov (United States)

    Son, Yoen-Ju; Longest, P. Worth; Tian, Geng; Hindle, Michael

    2013-01-01

    The aim of this study was to evaluate and modify commercial dry powder inhalers (DPIs) for the aerosolization of a submicrometer excipient enhanced growth (EEG) formulation. The optimized device and formulation combination was then tested in a realistic in vitro mouth-throat - tracheobronchial (MT-TB) model. An optimized EEG submicrometer powder formulation, consisting of albuterol sulfate (drug), mannitol (hygroscopic excipient), L-leucine (dispersion enhancer) and poloxamer 188 (surfactant) in a ratio of 30:48:20:2 was prepared using a Büchi Nano spray dryer. The aerosolization performance of the EEG formulation was evaluated with 5 conventional DPIs: Aerolizer, Novolizer, HandiHaler, Exubera and Spiros. To improve powder dispersion, the HandiHaler was modified with novel mouth piece (MP) designs. The aerosol performance of each device was assessed using a next generation impactor (NGI) at airflow rates generating a pressure drop of 4 kPa across the DPI. In silico and in vitro deposition and hygroscopic growth of formulations was studied using a MT-TB airway geometry model. Both Handihaler and Aerolizer produced high emitted doses (ED) together with a significant submicrometer aerosol fraction. A modified HandiHaler with a MP including a three-dimensional (3D) array of rods (HH-3D) produced a submicrometer particle fraction of 38.8% with a conventional fine particle fraction (% <5µm) of 97.3%. The mass median diameter (MMD) of the aerosol was reduced below 1 µm using this HH-3D DPI. The aerosol generated from the modified HandiHaler increased to micrometer size (2.8 µm) suitable for pulmonary deposition, when exposed to simulated respiratory conditions, with negligible mouth-throat (MT) deposition (2.6 %). PMID:23608613

  20. Effect of Kollidon VA®64 particle size and morphology as directly compressible excipient on tablet compression properties.

    Science.gov (United States)

    Chaudhary, R S; Patel, C; Sevak, V; Chan, M

    2018-01-01

    The study evaluates use of Kollidon VA ® 64 and a combination of Kollidon VA ® 64 with Kollidon VA ® 64 Fine as excipient in direct compression process of tablets. The combination of the two grades of material is evaluated for capping, lamination and excessive friability. Inter particulate void space is higher for such excipient due to the hollow structure of the Kollidon VA ® 64 particles. During tablet compression air remains trapped in the blend exhibiting poor compression with compromised physical properties of the tablets. Composition of Kollidon VA ® 64 and Kollidon VA ® 64 Fine is evaluated by design of experiment (DoE). A scanning electron microscopy (SEM) of two grades of Kollidon VA ® 64 exhibits morphological differences between coarse and fine grade. The tablet compression process is evaluated with a mix consisting of entirely Kollidon VA ® 64 and two mixes containing Kollidon VA ® 64 and Kollidon VA ® 64 Fine in ratio of 77:23 and 65:35. A statistical modeling on the results from the DoE trials resulted in the optimum composition for direct tablet compression as combination of Kollidon VA ® 64 and Kollidon VA ® 64 Fine in ratio of 77:23. This combination compressed with the predicted parameters based on the statistical modeling and applying main compression force between 5 and 15 kN, pre-compression force between 2 and 3 kN, feeder speed fixed at 25 rpm and compression range of 45-49 rpm produced tablets with hardness ranging between 19 and 21 kp, with no friability, capping, or lamination issue.

  1. Innovations in natural ingredients and their use in skin care.

    Science.gov (United States)

    Fowler, Joseph F; Woolery-Lloyd, Heather; Waldorf, Heidi; Saini, Ritu

    2010-06-01

    Natural ingredients have been used traditionally for millennia and their application in topical creams, lotions and preparations within the traditional medicines and healing traditions of many cultures has been observed. Over the last 20 years, clinical and laboratory studies have identified the benefits of an array of natural ingredients for skin care. Consequently, a number of these ingredients and compounds are today being developed, used or considered not only for anti-aging effects, but also for use in dermatologic disorders. Certain ingredients, such as colloidal oatmeal and aloe vera, have been identified as beneficial in the treatment of psoriasis and atopic dermatitis, respectively, due to their anti-inflammatory properties. For combating acne and rosacea, green tea, niacinamide and feverfew are considered efficacious. As to hyperpigmentation and antioxidative capabilities, licorice, green tea, arbutin, soy, acai berry, turmeric and pomegranate are among those plants and compounds found to be most beneficial. Additional research is needed to determine to confirm and elucidate the benefits of these ingredients in the prevention and management of skin disease.

  2. Safety of botanical ingredients in personal care products/cosmetics.

    Science.gov (United States)

    Antignac, Eric; Nohynek, Gerhard J; Re, Thomas; Clouzeau, Jacques; Toutain, Hervé

    2011-02-01

    The key issue of the safety assessment of botanical ingredients in personal care products (PCP) is the phytochemical characterisation of the plant source, data on contamination, adulteration and hazardous residues. The comparative approach used in the safety assessment of GM-plants may be applied to novel botanical PCP ingredients. Comparator(s) are the parent plant or varieties of the same species. Chemical grouping includes definition of chemical groups suitable for a read-across approach; it allows the estimation of toxicological endpoints on the basis of data from related substances (congeneric groups) with physical/chemical properties producing similar toxicities. The Threshold of Toxicological Concern (TTC) and Dermal Sensitisation Threshold (DST) are tools for the assessment of trace substances or minor ingredients. The evaluation of skin penetration of substances present in human food is unnecessary, whereas mixtures may be assessed on the basis of physical/chemical properties of individual substances. Adverse dermal effects of botanicals include irritation, sensitisation, phototoxicity and immediate-type allergy. The experience from dietary supplements or herbal medicines showed that being natural is not equivalent to being safe. Pragmatic approaches for quality and safety standards of botanical ingredients are needed; consumer safety should be the first objective of conventional and botanical PCP ingredients. Copyright © 2010 Elsevier Ltd. All rights reserved.

  3. The role of nonfat ingredients on confectionery fat crystallization.

    Science.gov (United States)

    West, Ryan; Rousseau, Dérick

    2017-03-31

    Confections such as chocolate and biscuit fillings are composed of a continuous fat phase that contains dispersed nonfat ingredients such as sugar and cocoa powder. Research on fat crystallization and rheology in confections often extrapolates crystallization and textural properties from bulk to mixed systems while overlooking the important role of composition or particle interactions. For example, in chocolate processing the fat phase aids dispersed phase lubrication and fluidity whereas the dispersed particles assist in fat crystallization by providing many nucleation sites. In confections with a high dispersed phase volume fraction, fat crystallization may be hindered due to reduced triacyglycerol mobility, confinement, and increased tortuosity. This is further complicated in systems with slow crystallizing fats such as palm oil whose crystallization is exceptionally sensitive to composition and processing. This review breaks down the physical chemistry of fat-based confections and discusses the impact of different nonfat ingredients towards fat crystallization and rheology. The behavior of palm oil is further highlighted as it is becoming increasingly popular as a confectionery ingredient. Lastly, ingredient-ingredient interactions and their role in fat crystallization are described along with force spectroscopy as a novel tool to characterize such phenomena. Force spectroscopy utilizes atomic force microscopy to measure intermolecular forces as a function of distance but remains largely unexplored in the area of food science.

  4. Relationship between Physical Inactivity and Health Characteristics among Participants in an Employee Wellness Program

    Science.gov (United States)

    Birdee, Gurjeet S.; Byrne, Daniel W.; McGown, Paula W.; Rothman, Russell L.; Rolando, Lori A.; Holmes, Marilyn C.; Yarbrough, Mary I.

    2013-01-01

    Objective To characterize factors associated with physical inactivity among employees with access to workplace wellness program. Methods We examined data on physical inactivity, defined as exercise less than once a week, from the 2010 health risk assessment (HRA) completed by employees at a major academic institution (n=16,976). Results Among employees, 18% individuals reported physical activity less than once a week. Individuals who were physically inactive as compared with physically active reported higher prevalence of cardiovascular diseases (AOR 1.36 [1.23–1.51], fair or poor health status (AOR 3.52 [2.97–4.17]) and absenteeism from work (AOR 1.59 [1.41–1.79]). Overall, physically inactive employees as compared to physically active employees reported more interest in health education programs. Conclusions Future research is needed to address barriers to physical inactivity to improve employee wellness and potentially lower health utility costs. PMID:23618884

  5. Predictors of physical inactivity among elderly malaysians: recommendations for policy planning.

    Science.gov (United States)

    Kaur, Jasvindar; Kaur, Gurpreet; Ho, Bee Kiau; Yao, Weng Keong; Salleh, Mohmad; Lim, Kuang Hock

    2015-04-01

    Physical inactivity is the fourth leading risk factor for global mortality. Regular moderate-intensity physical activity has significant benefits for health. To determine the socioeconomic predictors of physical inactivity among elderly Malaysian population. A nationwide community-based survey was conducted among 4831 respondents aged ≥60 years with a face-to-face questionnaire. The prevalence of physical inactivity among the elderly was 88.0%, highest in respondents aged older than 80 years (95.4%), females (90.1%), other Bumiputra (92.2%), earning household income less than RM1000 (87.9%), and residing in urban locality (88.4%). In the multivariate model, the predictors of physical inactivity were only sex, ethnicity, locality, and age group (adjusted odds ratio = 1.3-3.6). The predictors of physical inactivity can identify the risk factors to develop policies that will reduce the public health burden of noncommunicable diseases. © 2014 APJPH.

  6. Geographical Variations in the Environmental Determinants of Physical Inactivity among U.S. Adults.

    Science.gov (United States)

    An, Ruopeng; Li, Xinye; Jiang, Ning

    2017-10-31

    Physical inactivity is a major modifiable risk factor for morbidity, disability and premature mortality worldwide. This study assessed the geographical variations in the impact of environmental quality on physical inactivity among U.S. adults. Data on county-level prevalence of leisure-time physical inactivity came from the Behavioral Risk Factor Surveillance System. County environment was measured by the Environmental Quality Index (EQI), a comprehensive index of environmental conditions that affect human health. The overall EQI consists of five subdomains-air, water, land, social, and built environment. Geographically weighted regressions (GWRs) were performed to estimate and map county-specific impact of overall EQI and its five subdomains on physical inactivity prevalence. The prevalence of leisure-time physical inactivity among U.S. counties was 25% in 2005. On average, one standard deviation decrease in the overall EQI was associated with an increase in county-level prevalence of leisure-time physical inactivity by nearly 1%. However, substantial geographical variations in the estimated environmental determinants of physical inactivity were present. The estimated changes of county-level prevalence of leisure-time physical inactivity resulted from one standard deviation decrease of the overall EQI ranged from an increase of over 3% to a decrease of nearly 2% across U.S. counties. Analogous, the estimated changes of county-level prevalence of leisure-time physical inactivity resulted from one standard deviation decrease of the EQI air, water, land, social, and built environment subdomains ranged from an increase of 2.6%, 1.5%, 2.9%, 3.3%, and 1.7% to a decrease of 2.9%, 1.4%, 2.4%, 2.4%, and 0.8% across U.S. counties, respectively. Given the substantial heterogeneities in the environmental determinants of physical inactivity, locally customized physical activity interventions are warranted to address the most concerning area-specific environmental issue.

  7. Physical inactivity displays a mediator role in the association of diabetes and poverty: A spatiotemporal analysis

    Directory of Open Access Journals (Sweden)

    Lung-Chang Chien

    2017-11-01

    Full Text Available Physical inactivity is one of the risk factors of diabetes. In addition, physical inactivity is attributed to urbanization-related factors, such as poverty, which is also one of the risk factors of diabetes. We hypothesized that physical inactivity is a mediator in the association between diabetes and poverty, and that spatial heterogeneity exists in these relationships. This study adopted a spatiotemporal modelling approach to conduct this mediator analysis. From 2004-2011, data were collected at the county level in 48 contiguous states (with a total of 3,109 counties from the Behavioral Risk Factor Surveillance System (BRFSS and American Community Survey. Poverty percentage significantly affected physical inactivity prevalence and diabetes prevalence in two separate models. Using a model with both physical inactivity and poverty percentages as independent variables, we verified that physical inactivity prevalence is a significant mediator. In this model, physical inactivity prevalence resulted in a significant positive association with diabetes prevalence, and the influence of poverty percentage on diabetes prevalence was significantly reduced (P=0.0009. An advanced spatiotemporal analysis revealed that 32.65% of counties having a significant positive association between diabetes prevalence and physical inactivity prevalence also had a significant positive association between physical inactivity prevalence and poverty percentage. Those counties were also likely located in the South and Southeast of USA. In summary, the findings of this study demonstrate the mediating effect of physical inactivity between diabetes and poverty. When implementing diabetes prevention in communities with higher poverty, appropriate strategies to reduce the cost burden of physical activity programmes should be considered.

  8. Effects of Some Topological Ingredients on the Evolutionary Ultimatum Game

    International Nuclear Information System (INIS)

    Deng Lili; Zhang Jianxiong; Tang Wansheng; Zhang Wei

    2012-01-01

    This study aims at figuring out the crucial topological ingredients which affect the outcomes of the ultimatum game located on different networks, encompassing the regular network, the random network, the small-world network, and the scale-free network. With the aid of random interchanging algorithm, we investigate the relations between the outcomes of the ultimatum game and some topological ingredients, including the average range, the clustering coefficient and the heterogeneity, and so forth. It is found that for the regular, random and small-work networks, the average range and the clustering coefficient have evident impacts on the ultimatum game, while for the scale-free network, the original degree heterogeneity and the underlying rich-club characterizations are the mainly important topological ingredients that influence the outcomes of ultimatum game substantially.

  9. What Is “Natural”? Consumer Responses to Selected Ingredients

    Directory of Open Access Journals (Sweden)

    Edgar Chambers

    2018-04-01

    Full Text Available Interest in “natural” food has grown enormously over the last decade. Because the United States government has not set a legal definition for the term “natural”, customers have formed their own sensory perceptions and opinions on what constitutes natural. In this study, we examined 20 ingredients to determine what consumers consider to be natural. Using a national database, 630 consumers were sampled (50% male and 50% female online, and the results were analyzed using percentages and chi-square tests. No ingredient was considered natural by more than 69% of respondents. We found evidence that familiarity may play a major role in consumers’ determination of naturalness. We also found evidence that chemical sounding names and the age of the consumer have an effect on whether an ingredient and potentially a food is considered natural. Interestingly, a preference towards selecting GMO (genetically modified organisms foods had no significant impact on perceptions of natural.

  10. Efficacy and safety of ingredients found in preworkout supplements.

    Science.gov (United States)

    Eudy, Anne E; Gordon, Lindsay L; Hockaday, Brandon C; Lee, Daniel A; Lee, Vivianne; Luu, Daniel; Martinez, Carlos A; Ambrose, Peter J

    2013-04-01

    Published evidence on common ingredients of "energy drinks" and other dietary supplements widely used by consumers in hopes of enhancing athletic performance is reviewed. Preworkout products- unregulated dietary supplements- typically contain "proprietary blends" of multiple ingredients, including caffeine, dimethylamylamine, creatine, arginine, β-alanine, taurine, and phosphates. While some dietary supplement labels instruct consumers to seek the advice of a health care professional before using the products, the labels usually do not disclose all ingredients or their precise amounts, and evidence to support the purported performance-enhancing benefits is generally lacking. There is limited evidence to support the use of some preworkout supplement ingredients. For example, in one small placebo-controlled study (n = 12), the use of the energy drink Red Bull (containing caffeine and taurine) 40 minutes before a simulated cycling time trial appeared to provide a meaningful ergogenic benefit; in another small study (n = 12), the use of a similar caffeine-containing product (Redline) by strength-trained athletes was found to improve reaction time, energy, and mental focus relative to placebo use. However, published evidence on the use of the other ingredients listed above is scant, inconclusive, or conflicting. Adverse effects reported in association with preworkout supplements include gastrointestinal symptoms, cardiac arrhythmia, blood pressure increases, and potential effects on lipids and blood glucose. Although evidence exists to support the performance-enhancement efficacy of some preworkout ingredients as standalone agents, published data on combination products are scant, inconclusive, or conflicting. The safety of these products may be compromised if users consume larger-than-recommended amounts or use more than one product.

  11. Effects of physical activity and inactivity on muscle fatigue

    Directory of Open Access Journals (Sweden)

    Gregory C. Bogdanis

    2012-05-01

    Full Text Available The aim of this review was to examine the mechanisms by which physical activity and inactivity modify muscle fatigue. It is well known that acute or chronic increases in physical activity result in structural, metabolic, hormonal, neural and molecular adaptations that increase the level of force or power that can be sustained by a muscle. These adaptations depend on the type, intensity and volume of the exercise stimulus, but recent studies have highlighted the role of high intensity, short duration exercise as a time-efficient method to achieve both anaerobic and aerobic/endurance type adaptations. The factors that determine the fatigue profile of a muscle during intense exercise include muscle fibre composition, neuromuscular characteristics high energy metabolite stores, buffering capacity, ionic regulation, capillarization and mitochondrial density. Muscle fiber type transformation during exercise training is usually towards the intermediate type IIA at the expense of both type I and type IIx myosin heavy chain isoforms. High intensity training results in increases of both glycolyic and oxidative enzymes, muscle capilarization, improved phosphocreatine resynthesis and regulation of K+, H+ and lactate ions. Decreases of the habitual activity level due to injury or sedentary lifestyle result in partial or even compete reversal of the adaptations due to previous training, manifested by reductions in fibre cross-sectional area, decreased oxidative capacity and capillarization. Complete immobilization due to injury results in markedly decreased force output and fatigue resistance. Muscle unloading reduces electromyographic activity and causes muscle atrophy and significant decreases in capillarization and oxidative enzymes activity. The last part of the review discusses the beneficial effects of intermittent high intensity exercise training in patients with different health conditions to demonstrate the powerful effect exercise on health and well

  12. Motor-Driven (Passive) Cycling: A Potential Physical Inactivity Countermeasure?

    Science.gov (United States)

    Peterman, James E.; Wright, Kenneth P.; Melanson, Edward L.; Kram, Rodger; Byrnes, William C.

    2016-01-01

    We have previously shown that motor-driven (passive) stationary cycling elevates energy expenditure (EE). Purpose To quantify how acute passive cycling affects glucose and insulin responses to an oral glucose tolerance test (OGTT) and basic cognition compared to sitting and moderate-intensity active cycling. Methods Twenty-four physically inactive healthy males completed three trials in randomized order involving 30-minute conditions of sitting, passive cycling and moderate-intensity cycling. During each condition, EE was measured and participants performed cognitive tests. Following each condition, a 2-hour OGTT was performed. Results EE was significantly higher during the cycling conditions compared to sitting (1.36±0.58 and 6.50±1.73 kcal·min−1 greater than sitting for passive and moderate-intensity, respectively). A significant correlation was found between body fat percentage and post-sitting OGTT 2-h post plasma glucose (r2=0.30, pcycling lowered 2-h post plasma glucose (7.7±1.3 vs. 6.9±1.6mmol·L−1, respectively, pcycling had similar beneficial effects on 2-h post plasma glucose and WBISI. Cognitive performance did not significantly differ between the sitting and passive cycling conditions. Conclusion 2-h post plasma glucose was lower and WBISI following acute passive cycling was higher in non-lean participants. Given that and the increase in EE without changes in cognitive performance, we propose passive cycling as a promising intervention to counteract some of the deleterious effects of prolonged sitting in the workplace. PMID:27054677

  13. Effects of Physical Activity and Inactivity on Muscle Fatigue

    Science.gov (United States)

    Bogdanis, Gregory C.

    2012-01-01

    The aim of this review was to examine the mechanisms by which physical activity and inactivity modify muscle fatigue. It is well known that acute or chronic increases in physical activity result in structural, metabolic, hormonal, neural, and molecular adaptations that increase the level of force or power that can be sustained by a muscle. These adaptations depend on the type, intensity, and volume of the exercise stimulus, but recent studies have highlighted the role of high intensity, short-duration exercise as a time-efficient method to achieve both anaerobic and aerobic/endurance type adaptations. The factors that determine the fatigue profile of a muscle during intense exercise include muscle fiber composition, neuromuscular characteristics, high energy metabolite stores, buffering capacity, ionic regulation, capillarization, and mitochondrial density. Muscle fiber-type transformation during exercise training is usually toward the intermediate type IIA at the expense of both type I and IIx myosin heavy-chain isoforms. High-intensity training results in increases of both glycolytic and oxidative enzymes, muscle capillarization, improved phosphocreatine resynthesis and regulation of K+, H+, and lactate ions. Decreases of the habitual activity level due to injury or sedentary lifestyle result in partial or even compete reversal of the adaptations due to previous training, manifested by reductions in fiber cross-sectional area, decreased oxidative capacity, and capillarization. Complete immobilization due to injury results in markedly decreased force output and fatigue resistance. Muscle unloading reduces electromyographic activity and causes muscle atrophy and significant decreases in capillarization and oxidative enzymes activity. The last part of the review discusses the beneficial effects of intermittent high-intensity exercise training in patients with different health conditions to demonstrate the powerful effect of exercise on health and well being. PMID

  14. Comprehensive Management Strategies for Physical Inactivity in Youth

    Science.gov (United States)

    MYER, GREGORY D.; FAIGENBAUM, AVERY D.; STRACCIOLINI, ANDREA; HEWETT, TIMOTHY E.; MICHELI, LYLE J.; BEST, THOMAS M.

    2013-01-01

    Despite the widely recognized benefits of daily play, recreation, sports, and physical education on the physical and psychosocial well-being of children and adolescents, many contemporary children and adolescents worldwide do not meet the recommendations for daily physical activity. The decline in physical activity seems to start early in life which leads to conditions characterized by reduced levels of physical activity in the pediatric population that are inconsistent with current public health recommendations. Unlike many other diseases and disorders in pediatrics, physical inactivity in youth is unique in that it currently lacks a clinical gold standard for diagnosis. This makes the diagnosis and treatment medically challenging, though no less important, as the resultant ramifications of a missed diagnosis are of significant detriment. Exercise deficient children need to be identified early in life and treated with developmentally appropriate exercise programs designed to target movement deficiencies and physical weaknesses in a supportive environment. Without such interventions early in life, children are more likely to become resistant to our interventions later in life and consequently suffer from adverse health consequences. Integrative approaches that link health care professionals, pediatric exercise specialists, school administrators, community leaders, and policy makers, may provide the best opportunity to promote daily physical activity, reinforce desirable behaviors, and educate parents about the exercise-health link. If health care providers miss the window of opportunity to identify exercise deficit disorder in youth and promote healthy lifestyle choices, the eventual decline and disinterest in physical activity will begin to take shape and new health care concerns will continue to emerge. PMID:23851413

  15. Fibre content and physiochemical properties of various horse feed ingredients

    DEFF Research Database (Denmark)

    Brøkner, Christine; Knudsen, Knud Erik Bach; Tauson, Anne-Helene

    2010-01-01

    There is an increasing need for identifying energy dense feed ingredients based on fibre, as starch has been shown to cause health problems in sports horses (Kronfeld et al., 2005). This experiment aimed at evaluating feeds considered to be suitable for horses by use of an enzymatic-chemical diet......-chemical dietary fibre (DF) analytical method compared with conventional analytical methods of crude fibre (CF) and neutral detergent fibre (NDF). We expect the DF method to provide detailed and useful information concerning the nutritional properties of feed ingredients for horses....

  16. Contact allergy to the active ingredients of Kathon CG.

    Science.gov (United States)

    Bruze, M; Dahlquist, I; Fregert, S; Gruvberger, B; Persson, K

    1987-04-01

    The preservative Kathon CG is a commercial preparation, consisting of 2 active ingredients and other components. 28 patients with contact allergy to Kathon CG participated in a study in which patch testing was performed with serial dilutions, and with 5 chromatographically separated fractions. All reacted to fraction IV, and 2 patients also to fraction II. Mass spectrometry and nuclear magnetic resonance spectrometry identified fraction II and IV to be the active ingredients; 2-methyl-4-isothiazolin-3-one and 5-chloro-2-methyl-4-isothiazolin-3-one.

  17. Galloyl-RGD as a new cosmetic ingredient

    OpenAIRE

    Park, Dae-Hun; Jung, Dae Hyun; Kim, Soo Jung; Kim, Sung Han; Park, Kyung Mok

    2014-01-01

    Background The cosmetics market has rapidly increased over the last years. For example, in 2011 it reached 242.8 billion US dollars, which was a 3.9% increase compared to 2010. There have been many recent trials aimed at finding the functional ingredients for new cosmetics. Gallic acid is a phytochemical derived from various herbs, and has anti-fungal, anti-viral, and antioxidant properties. Although phytochemicals are useful as cosmetic ingredients, they have a number of drawbacks, such as t...

  18. Inactive nurses in Taiwan: human capital, intention to return to hospital nursing, and incentives for returning.

    Science.gov (United States)

    Yu, Hsing-Yi; Tang, Fu-In; Chen, I-Ju; Yin, Teresa J C; Chen, Chu-Chieh; Yu, Shu

    2016-04-01

    To investigate inactive nurses' human capital, intention to return to hospital nursing and incentives for returning. Few studies have discussed the loss of human capital with regard to inactive nurses and how to attract them to return to clinical work. Systematic random sampling was used, with 328 subjects completing the mailed questionnaires, resulting in a response rate of 25.4%. Inactive nurses not only had moderate to high human capital (average years of nursing experience was 10.29, with moderate to high levels of nursing professional commitment and nursing competence) and were young. Forty-three percent of subjects reported intending to return to hospital nursing. Sufficient nurse staffing, greater safety in the working environment, and re-entry preparation programmes were incentives for returning. Recruiting inactive nurses back to hospital work is vital and feasible as inactive nurses had a moderate to high degree of human capital. The most feasible way is offering reasonable working conditions, in particular, providing sufficient staffing, a safe working environment and re-entry preparation programmes. The findings confirm the human capital of inactive nurses and provide concrete directions for nursing managers to follow when recruiting inactive nurses to hospital nursing. © 2015 John Wiley & Sons Ltd.

  19. When Action-Inaction Framing Leads to Higher Escalation of Commitment: A New Inaction-Effect Perspective on the Sunk-Cost Fallacy.

    Science.gov (United States)

    Feldman, Gilad; Wong, Kin Fai Ellick

    2018-04-01

    Escalation of commitment to a failing course of action occurs in the presence of (a) sunk costs, (b) negative feedback that things are deviating from expectations, and (c) a decision between escalation and de-escalation. Most of the literature to date has focused on sunk costs, yet we offer a new perspective on the classic escalation-of-commitment phenomenon by focusing on the impact of negative feedback. On the basis of the inaction-effect bias, we theorized that negative feedback results in the tendency to take action, regardless of what that action may be. In four experiments, we demonstrated that people facing escalation-decision situations were indeed action oriented and that framing escalation as action and de-escalation as inaction resulted in a stronger tendency to escalate than framing de-escalation as action and escalation as inaction (mini-meta-analysis effect d = 0.37, 95% confidence interval = [0.21, 0.53]).

  20. Steganography in inactive frames of VoIP streams encoded by source codec

    OpenAIRE

    Huang, Yongfeng; Tang, Shanyu; Yuan, Jian

    2011-01-01

    This paper describes a novel high capacity steganography algorithm for embedding data in the inactive frames of low bit rate audio streams encoded by G.723.1 source codec, which is used extensively in Voice over Internet Protocol (VoIP). This study reveals that, contrary to existing thoughts, the inactive frames of VoIP streams are more suitable for data embedding than the active frames of the streams, that is, steganography in the inactive audio frames attains a larger data embedding capacit...

  1. 21 CFR 341.12 - Antihistamine active ingredients.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Antihistamine active ingredients. 341.12 Section 341.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS FOR HUMAN USE COLD, COUGH, ALLERGY, BRONCHODILATOR, AND ANTIASTHMATIC DRUG PRODUCTS FOR OVER-THE...

  2. Radiation processing of dry food ingredients - a review

    Science.gov (United States)

    Farkas, J.

    Radiation decontamination of dry ingredients, herbs and enzyme preparations is a technically feasible, economically viable and safe physical process. The procedure is direct, simple, requires no additives, does not leave residues and is highly efficient. Its dose requirement is moderate. Radiation doses of 3 to 10 kGy proved to be sufficient to reduce the viable cell counts to a satisfactory level. Ionizing radiations do not cause any significant rise in temperature and the flavour, texture or other important technological or sensory properties of most ingredients are not influenced at radiation doses necessary for a satisfactory decontamination. The microflora surviving the cell-count reduction by irradiation is more sensitive to subsequent food processing treatments than the microflora of untreated ingredients. Recontamination can be prevented since the product can be irradiated in its final packaging. Irradiation can be carried out in commercial containers and it results in considerable savings of energy and labour as compared to alternative decontamination techniques. Radiation processing of dry ingredients is an emerging technology in several countries and more-and-more clearances on irradiated foods are issued or expected to be granted in the near future.

  3. Nutritive Value and Availability of Commonly Used Feed Ingredients ...

    African Journals Online (AJOL)

    Commonly utilized feed ingredients for culture of Nile tilapia (Oreochromis niloticus) and African catfish (Clarias gariepinus) from Kenya, Tanzania and Rwanda were collected over a period of six months (January - June 2010) and evaluated for their nutritive composition through proximate analysis. Most of the fish feed ...

  4. 7 CFR 58.634 - Assembling and combining mix ingredients.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Assembling and combining mix ingredients. 58.634 Section 58.634 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS...

  5. Botanical supplements: detecting the transition from ingredients to supplements

    Science.gov (United States)

    Methods were developed using flow injection mass spectrometry (FIMS) and chemometrics for the comparison of spectral similarities and differences of 3 botanical ingredients and their supplements: Echinacea purpurea aerial samples and solid and liquid supplements, E. purpurea root samples and solid s...

  6. PCR-based detection of allergenic mackerel ingredients in seafood

    Indian Academy of Sciences (India)

    Administrator

    Keywords. Scomber mackerel; allergy; seafood; PCR; genus identification. RESEARCH NOTE. PCR-based detection of allergenic mackerel ingredients in seafood. FUTOSHI ARANISHI 1,* and TAKANE OKIMOTO 1,2. 1Department of Biological and Environmental Sciences, Miyazaki University,. Miyazaki 889-2192, Japan.

  7. Effectiveness of probiotic feed ingredient on the growth performance ...

    African Journals Online (AJOL)

    The use of antibiotics in human or veterinary therapy is followed by the appearance of bacteria resistance to these antibiotics. This is a serious problem because of the direct impact on therapeutic possibilities. This study aimed at evaluating the efficiency of a probiotic feed ingredient (Starter) on the growth performance of ...

  8. Consumer needs and requirements for food and ingredient traceability information

    NARCIS (Netherlands)

    Rijswijk, van W.; Frewer, L.J.

    2012-01-01

    The introduction of improved food traceability systems has aimed to restore consumer confidence in food safety and quality, in part by being able to provide consumers with more information about the origins of foods and food ingredients. However, little is known about consumers’ opinions and beliefs

  9. Natural ingredients based cosmetics. Content of selected fragrance sensitizers

    DEFF Research Database (Denmark)

    Rastogi, Suresh Chandra; Johansen, J D; Menné, T

    1996-01-01

    -hexylcinnamic aldehyde. The study revealed that the 91% (20/22) of the natural ingredients based perfumes contained 0.027%-7.706% of 1 to 7 of the target fragrances. Between 1 and 5 of the chemically defined synthetic constituents of fragrance mix were found in 82% (18/22) of the perfumes. 35% (7/20) of the other...

  10. Dietary Supplement Ingredient Database (DSID) release 4.0

    Science.gov (United States)

    Nearly half of U.S. adults report taking dietary supplements (DS). A single serving of a DS may contain amounts of nutrients or other bioactive compounds that exceed their concentration in foods. During the manufacturing of DS, ingredients may be added in amounts exceeding the label claims in orde...

  11. The Chemistry of Curcumin, the Health Promoting Ingredient in Turmeric

    Science.gov (United States)

    Dewprashad, Brahmadeo

    2010-01-01

    Case studies pertaining to the health benefits of foods can be particularly effective in engaging students and in teaching core concepts in science (Heidemann and Urquart 2005). This case study focuses on the chemistry of curcumin, the health-promoting ingredient in turmeric. The case was developed to review core concepts in organic chemistry and…

  12. Biovailability of the antisalmonellal active ingredients contained in ...

    African Journals Online (AJOL)

    Biovailability of the antisalmonellal active ingredients contained in Allium sativum bulbs. D Gatsing, R Aliyu, GI Adoga, Félicité M Tchouanguep. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO ...

  13. Microbiological Assay Of Ingredients, Contact Surfaces And Stages ...

    African Journals Online (AJOL)

    Sample at various stages and contact surfaces were obtained during akara processing from three locations in Maiduguri metropolis. The locations were Hausari, Mairi and Wulari. Samples of the ingredients and swabs of contact surfaces were taken. Total aerobic plate count, coliform count, taphylococcal count and ...

  14. Idea-Generation Techniques: A Formulary of Active Ingredients.

    Science.gov (United States)

    Smith, Gerald F.

    1998-01-01

    Reports the results of a study of active ingredients of creativity techniques, devices that promote idea generation, through an analysis of 172 idea-generation methods which identified three types of idea-generation devices--strategies, tactics, and enablers. These devices were organized into meaningful categories comprising a formulary of active…

  15. Antiulcerogenic benefits of herbal ingredients in ethanol-induced ...

    African Journals Online (AJOL)

    Antiulcerogenic benefits of herbal ingredients in ethanol-induced animal models. ... Although therapeutic approaches are widely available, preventive regimens are limited. Numerous studies have demonstrated that herbal ... gastric ulcer. Key words: Herbal Medicines, Gastric ulcer, Prevention, Animal models, Alcohol ...

  16. Fungal treated lignocellulosic biomass as ruminant feed ingredient: A review

    NARCIS (Netherlands)

    Kuijk, van S.J.A.; Sonnenberg, A.S.M.; Baars, J.J.P.; Hendriks, W.H.; Cone, J.W.

    2015-01-01

    In ruminant nutrition, there is an increasing interest for ingredients that do not compete with human nutrition. Ruminants are specialists in digesting carbohydrates in plant cell walls; therefore lignocellulosic biomass has potential in ruminant nutrition. The presence of lignin in biomass,

  17. Mechanism of action of cathinone: The active ingredient of Khat ...

    African Journals Online (AJOL)

    Objective: To review the current understanding of the mechanism of action of cathinone, the active ingredient of khat. Data source: Published experimental studies on the nature and action and effect of cathinone on the central nervous system both in animals and humans. Data extraction: Data was taken from work ...

  18. 21 CFR 352.20 - Permitted combinations of active ingredients.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Permitted combinations of active ingredients. 352.20 Section 352.20 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... effective date was stayed until further notice. For the convenience of the user, the text is set forth as...

  19. 21 CFR 352.10 - Sunscreen active ingredients.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Sunscreen active ingredients. 352.10 Section 352.10 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... until further notice. For the convenience of the user, the revised text is set forth as follows: § 352...

  20. 21 CFR 333.320 - Permitted combinations of active ingredients.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Permitted combinations of active ingredients. 333.320 Section 333.320 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... Note: At 75 FR 9776, Mar. 4, 2010, § 333.320 was revised, effective Mar. 4, 2011. For the convenience...

  1. 21 CFR 101.4 - Food; designation of ingredients.

    Science.gov (United States)

    2010-04-01

    ... ingredients of dietary supplements that are botanicals (including fungi and algae) shall be consistent with... designation is not required for algae. The name of the part of the plant shall be expressed in English (e.g... rules on nomenclature, such as those found in the International Code of Botanical Nomenclature and shall...

  2. Microencapsulation as a tool for incorporating bioactive ingredients into food.

    Science.gov (United States)

    Kuang, S S; Oliveira, J C; Crean, A M

    2010-11-01

    Microencapsulation has been developed by the pharmaceutical industry as a means to control or modify the release of drug substances from drug delivery systems. In drug delivery systems microencapsulation is used to improve the bioavailability of drugs, control drug release kinetics, minimize drug side effects, and mask the bitter taste of drug substances. The application of microencapsulation has been extended to the food industry, typically for controlling the release of flavorings and the production of foods containing functional ingredients (e.g. probiotics and bioactive ingredients). Compared to the pharmaceutical industry, the food industry has lower profit margins and therefore the criteria in selecting a suitable microencapsulation technology are more stringent. The type of microcapsule (reservoir and matrix systems) produced and its resultant release properties are dependent on the microencapsulation technology, in addition to the physicochemical properties of the core and the shell materials. This review discusses the factors that affect the release of bioactive ingredients from microcapsules produced by different microencapsulation technologies. The key criteria in selecting a suitable microencapsulation technology are also discussed. Two of the most common physical microencapsulation technologies used in pharmaceutical processing, fluidized-bed coating, and extrusion-spheronization are explained to highlight how they might be adapted to the microencapsulation of functional bioactive ingredients in the food industry.

  3. Introducing CSR - The Missing Ingredient in the Land Reform Recipe?

    African Journals Online (AJOL)

    This article identifies corporate social responsibility (CSR) as one of the missing ingredients in the recipe for a successful land reform programme. The article introduces CSR and discusses the business case for CSR; identifies its benefits; considers its possible limitations; and examines the major drivers behind the notion.

  4. Development and validation of an ICP-MS method for the determination of elemental impurities in TP-6076 active pharmaceutical ingredient (API) according to USP 〈232〉/〈233〉.

    Science.gov (United States)

    Chahrour, Osama; Malone, John; Collins, Mark; Salmon, Vrushali; Greenan, Catherine; Bombardier, Amy; Ma, Zhongze; Dunwoody, Nick

    2017-10-25

    The new guidelines of the United States pharmacopeia (USP), European pharmacopeia (EP) and international conference on harmonization (ICH) regulating elemental impurities limits in pharmaceuticals signify the end of unspecific analysis of metals as outlined in USP 〈231〉. The new guidelines specify both daily doses and concentration/limits of elemental impurities in pharmaceutical final products, active pharmaceutical ingredients (API) and excipients. In chapter USP 〈233〉 method implementation, validation and quality control during the analytical process are described. We herein report the use of a stabilising matrix that overcomes low spike recovery problem encountered with Os and allows the determination of all USP required elemental impurities (As, Cd, Hg, Pb, V, Cr, Ni, Mo, Cu, Pt, Pd, Ru, Rh, Os and Ir) in a single analysis. The matrix was used in the validation of a method to determine elemental impurities in TP-6076 active pharmaceutical ingredient (API) by ICP-MS according to the procedures defined in USP〈233〉 and to GMP requirements. This validation will support the regulatory submission of TP-6076 which is a novel tetracycline analogue effective against the most urgent multidrug-resistant gram-negative bacteria. Evaluation of TP-6076 in IND-enabling toxicology studies has led to the initiation of a phase 1 clinical trial. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Survivability of freeze-dried probiotic Pediococcus pentosaceus strains GS4, GS17 and Lactobacillus gasseri (ATCC 19992 during storage with commonly used pharmaceutical excipients within a period of 120 days

    Directory of Open Access Journals (Sweden)

    Mayur Bagad

    2017-10-01

    Conclusions: Commonly used excipients can be considered as a vehicle for delivering active principle in probiotic formulation and for sustaining the viability and stability of probiotic strains for a period of 120 d.

  6. Increasing and decreasing motor and cognitive output: a model of general action and inaction goals.

    Science.gov (United States)

    Albarracín, Dolores; Handley, Ian M; Noguchi, Kenji; McCulloch, Kathleen C; Li, Hong; Leeper, Joshua; Brown, Rick D; Earl, Allison; Hart, William P

    2008-09-01

    General action and inaction goals can influence the amount of motor or cognitive output irrespective of the type of behavior in question, with the same stimuli producing trivial and important motor and cognitive manifestations normally viewed as parts of different systems. A series of experiments examined the effects of instilling general action and inaction goals using word primes, such as "action" and "rest." The first 5 experiments showed that the same stimuli influenced motor output, such as doodling on a piece of paper and eating, as well as cognitive output, such as recall and problem solving. The last 2 experiments supported the prediction that these diverse effects can result from the instigation of general action and inaction goals. Specifically, these last 2 studies confirmed that participants were motivated to achieve active or inactive states and that attaining them decreased the effects of the primes on behavior.

  7. Using Two Disability Measures to Compare Physical Inactivity Among US Adults With Disabilities.

    Science.gov (United States)

    McGuire, Dana Olzenak; Watson, Kathleen B; Carroll, Dianna D; Courtney-Long, Elizabeth A; Carlson, Susan A

    2018-01-18

    Prevalence of health behaviors among adults with disabilities may vary by disability measure. We used data from the 2011-2015 National Health Interview Survey to estimate prevalence of physical inactivity by disability status using 2 measures of disability: Basic Actions Difficulty questions (BADQ) and a standard 6-question measure (6Q). Disability prevalence (BADQ, 31.1%; 6Q, 17.5%) and inactivity prevalence among adults with disability (BADQ, 42.9%; 6Q, 52.5%) and without disability (BADQ, 24.3%; 6Q, 26.2%) varied by measure; however, both measures highlight inactivity disparities for adults with disability. Disability measures influence physical inactivity estimates and are important for guiding surveillance and health promotion activities for adults with disabilities.

  8. Patterns of association between environmental quality and physical inactivity vary across the rural-urban continuum

    Science.gov (United States)

    Physical inactivity has been associated with numerous adverse health outcomes including obesity, heart disease, and depression, and is considered a major contributor to all-cause mortality worldwide. Many studies have shown associations between specific environmental features (la...

  9. 38 CFR 4.89 - Ratings for inactive nonpulmonary tuberculosis in effect on August 19, 1968.

    Science.gov (United States)

    2010-07-01

    ... Diseases, Immune Disorders and Nutritional Deficiencies § 4.89 Ratings for inactive nonpulmonary... the kidney and residuals of tuberculosis of the spine. Where there are existing pulmonary and...

  10. Aerosolization Characteristics of Dry Powder Inhaler Formulations for the Excipient Enhanced Growth (EEG) Application: Effect of Spray Drying Process Conditions on Aerosol Performance

    OpenAIRE

    Son, Yoen-Ju; Longest, P. Worth; Hindle, Michael

    2013-01-01

    The aim of this study was to develop a spray dried submicrometer powder formulation suitable for the excipient enhanced growth (EEG) application. Combination particles were prepared using the Buchi Nano spray dryer B-90. A number of spray drying and formulation variables were investigated with the aims of producing dry powder formulations that were readily dispersed upon aerosolization and maximizing the fraction of submicrometer particles. Albuterol sulfate, mannitol, L-leucine, and poloxame...

  11. Quality by Design (QbD) Approach for Development of Co-Processed Excipient Pellets (MOMLETS) By Extrusion-Spheronization Technique.

    Science.gov (United States)

    Patel, Hetal; Patel, Kishan; Tiwari, Sanjay; Pandey, Sonia; Shah, Shailesh; Gohel, Mukesh

    2016-01-01

    Microcrystalline cellulose (MCC) is an excellent excipient for the production of pellets by extrusion spheronization. However, it causes slow release rate of poorly water soluble drugs from pellets. Co-processed excipient prepared by spray drying (US4744987; US5686107; WO2003051338) and coprecipitation technique (WO9517831) are patented. The objective of present study was to develop co-processed MCC pellets (MOMLETS) by extrusion-spheronization technique using the principle of Quality by Design (QbD). Co-processed excipient core pellets (MOMLETS) were developed by extrusion spheronization technique using Quality by Design (QbD) approach. BCS class II drug (telmisartan) was layered onto it in a fluidized bed processor. Quality Target Product Profile (QTPP) and Critical Quality Attributes (CQA) for pellets were identified. Risk assessment was reported using Ishikawa diagram. Plackett Burman design was used to check the effect of seven independent variables; superdisintegrant, extruder speed, ethanol: water, spheronizer speed, extruder screen, pore former and MCC: lactose; on percentage drug release at 30 min. Pareto chart and normal probability plot was constructed to identify the significant factors. Box-Behnken design (BBD) using three most significant factors (Extruder screen size, type of superdisintegrant and type of pore former) was used as an optimization design. The control space was identified in which desired quality of the pellets can be obtained. Co-processed excipient core pellets (MOMLETS) were successfully developed by QbD approach. Versatility, Industrial scalability and simplicity are the main features of the proposed research. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  12. Long-term sickness absence from work due to physical inactivity: A registry-based study.

    Science.gov (United States)

    Høgsbro, Cecilie; Davidsen, Michael; Sørensen, Jan

    2018-01-01

    The aim of this study was to explore the relationship between leisure-time physical inactivity and long-term sickness absence in a representative sample of individuals aged 16-54 years, within the labour market and in good health. It was hypothesised that physically inactive individuals have a higher risk of long-term sickness absence and longer duration of sickness absence. The study population was identified from the National Health and Morbidity Survey, 2010. Weekly data on long-term sickness absence were obtained from the National Register on Social Transfer Payments (the DREAM registry). The association of incidence and duration of long-term sickness absence with physical inactivity was explored using logistic and Poisson regression. Data were fitted to models with levels of physical activity, demographic, social and lifestyle characteristics as independent variables. A combined hurdle model was used to estimate the difference in mean number of absence weeks. Logistic regression showed that physically inactive individuals had a 27% higher incidence of long-term sickness absence compared with physically active individuals. The Poisson regression showed that long-term sickness absence was only slightly shorter (1 week less) for moderately active individuals compared with inactive individuals. The hurdle model estimated longer absence periods for inactive individuals (additional 2.5 weeks) in comparison with moderately and highly active individuals. The study showed that physically inactive individuals have a higher incidence of long-term absence and that physically inactive individuals have longer periods with sickness absence than moderately and highly active individuals. When adjustments for social and health behaviour were included, the estimated associations became statistically insignificant.

  13. Effect of physical inactivity on major noncommunicable diseases and life expectancy in Brazil.

    Science.gov (United States)

    de Rezende, Leandro Fornias Machado; Rabacow, Fabiana Maluf; Viscondi, Juliana Yukari Kodaira; Luiz, Olinda do Carmo; Matsudo, Victor Keihan Rodrigues; Lee, I-Min

    2015-03-01

    In Brazil, one-fifth of the population reports not doing any physical activity. This study aimed to assess the impact of physical inactivity on major noncommunicable diseases (NCDs), all-cause mortality and life expectancy in Brazil, by region and sociodemographic profile. We estimated the population attributable fraction (PAF) for physical inactivity associated with coronary heart disease, type 2 diabetes, breast cancer, colon cancer, and all-cause mortality. To calculate the PAF, we used the physical inactivity prevalence from the 2008 Brazilian Household Survey and relative risk data in the literature. In Brazil, physical inactivity is attributable to 3% to 5% of all major NCDs and 5.31% of all-cause mortality, ranging from 5.82% in the southeastern region to 2.83% in the southern region. Eliminating physical inactivity would increase the life expectancy by an average of 0.31 years. This reduction would affect mainly individuals with ≥ 15 years of schooling, male, Asian, elderly, residing in an urban area and earning ≥ 2 times the national minimum wage. In Brazil, physical inactivity has a major impact on NCDs and mortality, principally in the southeastern and central-west regions. Public policies and interventions promoting physical activity will significantly improve the health of the population.

  14. [Physical inactivity and associated factors in adults, São Paulo, Brazil].

    Science.gov (United States)

    Zanchetta, Luane Margarete; Barros, Marilisa Berti de Azevedo; César, Chester Luiz Galvão; Carandina, Luana; Goldbaum, Moisés; Alves, Maria Cecília Goi Porto

    2010-09-01

    To analyze the prevalence of overall and leisure time physical inactivity and associated factors and types of exercises or sports modalities according to schooling in 2,050 adults from 18 to 59 years of age - state of São Paulo, Brazil. Population-based cross-sectional study with a stratified sample of clusters performed in multiple stages. Physical inactivity was determined using the short version of the International Physical Activity Questionnaire - IPAQ and by a question on the regular practice of leisure time physical activity. Data analysis took the sample design into account. Prevalence of physical inactivity during leisure was higher among women. Poisson multiple regression model in man indicated that overall sedentarism was lower among single and separated men, students and without car in the household. Leisure physical inactivity was greater among men over forty years, among those with less schooling and full-time students. Overall physical inactivity was more prevalent among woman with more schooling, with less qualified occupations and widows. Leisure physical inactivity decreased with age and schooling. Among modalities practiced for leisure, walking was more prevalent among women and football was more prevalent among men. Most modalities were directly associated with schooling; approximately 25% of the individuals with more than 12 years of schooling practiced walking. These results suggest that interventions and public policies to promote physical activity should consider differences in gender and socioeconomic status as well as the preferences for different modalities and the context in which the physical activity is practiced.

  15. Physical inactivity and sedentary behavior: Overlooked risk factors in autoimmune rheumatic diseases?

    Science.gov (United States)

    Pinto, Ana Jéssica; Roschel, Hamilton; de Sá Pinto, Ana Lúcia; Lima, Fernanda Rodrigues; Pereira, Rosa Maria Rodrigues; Silva, Clovis Artur; Bonfá, Eloisa; Gualano, Bruno

    2017-07-01

    This review aims to (1) summarize the estimates of physical inactivity and sedentary behavior in autoimmune rheumatic diseases; (2) describe the relationship between physical (in)activity levels and disease-related outcomes; (3) contextualize the estimates and impact of physical inactivity and sedentary behavior in autoimmune diseases compared to other rheumatic diseases and chronic conditions; and (4) discuss scientific perspectives around this theme and potential clinical interventions to attenuate these preventable risk factors. We compiled evidence to show that estimates of physical inactivity and sedentary behavior in autoimmune rheumatic diseases are generally comparable to other rheumatic diseases as well as to other chronic conditions (e.g., type 2 diabetes, cardiovascular diseases, and obesity), in which a lack of physical activity and excess of sedentary behavior are well-known predictors of morbimortality. In addition, we also showed evidence that both physical inactivity and sedentary behavior may be associated with poor health-related outcomes (e.g., worse disease symptoms and low functionality) in autoimmune rheumatic diseases. Thus, putting into practice interventions to make the patients "sit less and move more", particularly light-intensity activities and/or breaking-up sedentary time, is a simple and prudent therapeutic approach to minimize physical inactivity and sedentary behavior, which are overlooked yet modifiable risk factors in the field of autoimmune rheumatic diseases. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Use of a screening method to determine excipients which optimize the extent and stability of supersaturated drug solutions and application of this system to solid formulation design.

    Science.gov (United States)

    Vandecruys, Roger; Peeters, Jef; Verreck, Geert; Brewster, Marcus E

    2007-09-05

    Assessing the effect of excipients on the ability to attain and maintain supersaturation of drug-based solution may provide useful information for the design of solid formulations. Judicious selection of materials that affect either the extent or stability of supersaturating drug delivery systems may be enabling for poorly soluble drug candidates or other difficult-to-formulate compounds. The technique suggested herein is aimed at providing a screening protocol to allow preliminary assessment of these factors based on small to moderate amounts of drug substance. A series of excipients were selected that may, by various mechanisms, affect supersaturation including pharmaceutical polymers such as HMPC and PVP, surfactants such as Polysorbate 20, Cremophor RH40 and TPGS and hydrophilic cyclodextrins such as HPbetaCD. Using a co-solvent based method and 25 drug candidates, the data suggested, on the whole, that the surfactants and the selected cyclodextrin seemed to best augment the extent of supersaturation but had variable benefits as stabilizers, while the pharmaceutical polymers had useful effect on supersaturation stability but were less helpful in increasing the extent of supersaturation. Using these data, a group of simple solid dosage forms were prepared and tested in the dog for one of the drug candidates. Excipients that gave the best extent and stability for the formed supersaturated solution in the screening assay also gave the highest oral bioavailability in the dog.

  17. Powder flow in an automated uniaxial tester and an annular shear cell: a study of pharmaceutical excipients and analytical data comparison.

    Science.gov (United States)

    Kuentz, Martin; Schirg, Peter

    2013-09-01

    An automated version of uniaxial powder flow testing has recently been developed and there is a need for experimental data from pharmaceutical powders. To compare the novel testing method with an annular shear cell using different pharmaceutical excipients. A particular aim was to gain an improved understanding of potential differences in the obtained flow results. Nine excipients were studied with both flow testers at different consolidation levels. Unconfined yield strengths were determined at similar major consolidation stresses. Finally, an anisotropic stress factor was calculated and the fractal character of the powders was assessed by means of image analysis in a rotating drum. Data correlated generally well; however, the unconfined yield strength from uniaxial testing resulted mostly in lower values compared to annular shear cell testing. Differences were specific for the given excipients and mannitol demonstrated the highest discrepancy of measured flow parameters. The differences were first discussed by considering wall friction, anisotropy of forces, brittleness as well as the fractal nature of the powder surface. This heterogeneity of the powder as well as the anisotropy of forces was also found to be important for the relative flow index. The automated uniaxial method demonstrated faster and more reproducible flow testing as compared to an annular shear cell. Therefore, the new method has a high potential in pharmaceutics for example in the quality-control of powders.

  18. A new lipid excipient, phosphorylated tocopherol mixture, TPM enhances the solubilisation and oral bioavailability of poorly water soluble CoQ10in a lipid formulation.

    Science.gov (United States)

    Pham, Anna C; Gavin, Paul; Libinaki, Roksan; Ramirez, Gisela; Boyd, Ben J

    2017-12-28

    Phosphorylated tocopherols are a new class of lipid excipients that have demonstrated potential in pharmaceutical applications. Their ability to solubilise poorly water soluble drugs indicates their potential utility in improving bioavailability of drugs where solubility limits their bioavailability. In this study a commercial mixture of phosphorylated tocopherols, TPM was combined with medium chain triglyceride (MCT) as a formulation for CoQ 10 , and in vitro and in vivo performance compared to the effect of addition of alternative tocopherol-based excipients. In in vitro digestion experiments, CoQ 10 was poorly solubilised in the digesting MCT as anticipated. Addition of TPM facilitated the enhanced solubilisation of CoQ 10 as did vitamin E TPGS (TPGS). Other tocopherol derivatives (tocopherol acetate, tocopherol) were less effective at solubilising the active during the digestion process. The trends in in vitro solubilisation were conserved in the in vivo bioavailability of CoQ 10 after oral administration to rats, with TPM and TPGS formulations providing approximately double the exposure of MCT alone, while the addition of the other tocopherol derivatives reduced the overall exposure. Collectively, the results indicate potential of TPM as a new solubilising excipient for use in oral drug delivery for poorly water soluble drugs. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Application of a Biodegradable Polyesteramide Derived from L-Alanine as Novel Excipient for Controlled Release Matrix Tablets.

    Science.gov (United States)

    Bonillo Martínez, Ana Dora; Galán, Inés Carmen Rodríguez; Bellver, María Victoria Margarit

    2017-11-01

    This pre-formulation study assays the capacity of the polyesteramide PADAS, poly (L-alanine-dodecanediol-L-alanine-sebacic), as an insoluble tablet excipient matrix for prolonged drug release. The flow properties of PADAS were suitable for tableting, and the compressibility of tablets containing exclusively PADAS was evaluated by ESEM observation of the microstructure. The tablets were resistant to crushing and non-friable and they did not undergo disintegration (typical features of an inert matrix). Tablets containing 33.33% sodium diclofenac (DF), ketoprofen (K) or dexketoprofen trometamol (DK-T) as a model drug, in addition with 66.67% of polymer, were formulated, and the absence of interactions between the components was confirmed by differential scanning calorimetry. Dissolution tests showed that PADAS retained DF and K and prolonged drug release, following a Higuchi kinetic. The tablets containing DK-T did not retain the drug sufficiently for prolonged release to be established. Tablets containing DK-T and 66.67, 83.33 or 91.67% PADAS, compressed at 44.48 or 88.96 kN, were elaborated to determine the influence of the polymer amount and of the compression force on DK-T release. Both parameters significantly delayed drug release, except when the proportion of polymer was 91.67%.

  20. Influence of the co-encapsulation of different excipients on the properties of polyester microparticle-based vaccine against brucellosis.

    Science.gov (United States)

    Murillo, M; Irache, J M; Estevan, M; Goñi, M M; Blasco, J M; Gamazo, C

    2004-03-01

    This work evaluates the influence of different pharmaceutical auxiliaries (Pluronic F68, polyvinylpyrrolidone [PVP] or Tween 20), when mixed with an antigenic extract from Brucella ovis (hot saline; HS), on the characteristics of the resulting poly(epsilon-caprolactone) (PEC) and poly(lactide-co-glycolide) (PLGA) microparticles. In all cases, PEC microparticles were smaller than PLGA ones. Concerning the HS loading, PLGA microparticles were highly dependent on the type of the excipient used, whereas all the PEC formulations displayed similar encapsulation efficiencies. For both types of microparticles, the presence of PVP induced a burst release effect. On the contrary, the use of Tween 20 or Pluronic F68 dramatically modified this profile. For PLGA-Tween 20 and PEC-Pluronic F68 microparticles, the HS was released in a pulsatil way during the first 7 days followed by a continuous release for at least 3 weeks. The antigenicity of the HS components was kept in all cases. Phagocytosis by murine monocytes showed a clear difference based just on the hydrophobicity of the polymer, being PEC microparticles better engulfed. Cell activation quantified by the release of H2O2 did not showed major differences between batches, however, microparticles of PEC and Pluronic F68 induced the highest nitric oxide production. Together, these results confirm the advantageous qualities of the "HS-PEC-Pluronic F68 microparticles" as favorable candidate for vaccine purposes against brucellosis.

  1. Evaluation of Three Chitin Metal Silicate Co-Precipitates as a Potential Multifunctional Single Excipient in Tablet Formulations

    Directory of Open Access Journals (Sweden)

    Rana Al-Shaikh Hamid

    2010-05-01

    Full Text Available The performance of the novel chitin metal silicate (CMS co-precipitates as a single multifunctional excipient in tablet formulation using direct compression and wet granulation methods is evaluated. The neutral, acidic, and basic drugs Spironolactone (SPL, ibuprofen (IBU and metronidazole (MET, respectively, were used as model drugs. Commercial Aldactone®, Fleximex® and Dumazole® tablets containing SPL, IBU and MET, respectively, and tablets made using Avicel® 200, were used in the study for comparison purposes. Tablets of acceptable crushing strength (>40 N were obtained using CMS. The friability values for all tablets were well below the maximum 1% USP tolerance limit. CMS produced superdisintegrating tablets (disintegration time < 1 min with the three model drugs. Regarding the dissolution rate, the sequence was as follow: CMS > Fleximex® > Avicel® 200, CMS > Avicel® 200 > Dumazole® and Aldactone® > Avicel® 200 > CMS for IBU, MET and SPL, respectively. Compressional properties of formulations were analyzed using density measurements and the compression Kawakita equation as assessment parameters. On the basis of DSC results, CMS co precipitates were found to be compatible with the tested drugs. Conclusively, the CMS co-precipitates have the potential to be used as filler, binder, and superdisintegrant, all-in-one, in the design of tablets by the direct compression as well as wet granulation methods.

  2. Protection of Proprietary Data Rights for Data Used to Support Tolerance Exemptions for Inert Ingredients

    Science.gov (United States)

    The FFDCA provides both exclusive use and data compensation protections for data that inert ingredient manufacturers submit to EPA to establish or maintain tolerances or tolerance exemptions for these ingredients. Find information about these protections.

  3. Safety Assessment of Panax spp Root-Derived Ingredients as Used in Cosmetics.

    Science.gov (United States)

    Becker, Lillian C; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2015-01-01

    The Cosmetic Ingredient Review Expert Panel (Panel) reviewed the safety of 13 Panax spp root-derived ingredients as used in cosmetics. Panax "spp" indicates that multiple species within the genus are used in cosmetics, but not all species within that genus. Four species are being considered in this safety assessment. These ingredients function mostly as skin-conditioning agents-miscellaneous, fragrance ingredients, skin-conditioning agents-humectant, skin-conditioning agents-emollient, and cosmetic astringents. The Panel reviewed available data related to these ingredients and addressed the issue of pulegone, a constituent of these ingredients and other ingredients, such as peppermint oil. The Panel concluded that these Panax spp root-derived ingredients are safe in the practices of use and concentration as given in this safety assessment. © The Author(s) 2015.

  4. Microalgae as healthy ingredients for functional food: a review.

    Science.gov (United States)

    Matos, J; Cardoso, C; Bandarra, N M; Afonso, C

    2017-08-01

    Microalgae are very interesting and valuable natural sources of highly valuable bioactive compounds, such as vitamins, essential amino acids, polyunsaturated fatty acids, minerals, carotenoids, enzymes and fibre. Due to their potential, microalgae have become some of the most promising and innovative sources of new food and functional products. Moreover, microalgae can be used as functional ingredients to enhance the nutritional value of foods and, thus, to favourably affect human health by improving the well-being and quality of life, but also by curtailing disease and illness risks. This review provides an overview of the current knowledge of the health benefits associated with the consumption of microalgae, bioactive compounds, functional ingredients, and health foods.

  5. Acrylamide content distribution and possible alternative ingredients for snack foods.

    Science.gov (United States)

    Cheng, Wei Chih; Sun, De Chao; Chou, Shin Shou; Yeh, An I

    2012-12-01

    Acrylamide (AA) contents in 294 snack foods including cereal-based, root- and tuber-based, and seafood-based foods, nuts, dried beans, and dried fruits purchased in Taiwan were determined by gas chromatography-mass spectrometry in this study. The highest levels of average AA content were found in root- and tuber-based snack foods (435 μg/kg), followed by cereal-based snack foods (299 μg/kg). Rice flour-based, seafood-based, and dried fruit snack foods had the lowest average AA content (snack foods in Taiwan. The results could provide important data regarding intake information from the snack foods. In addition, the results showed a great diversity of AA content in snack foods prepared from different ingredients. Rice- and seafood-based products had much lower AA than those made from other ingredients. This information could constitute a good reference for consumers to select products for healthy snacking.

  6. Adaptive ingredients against food spoilage in Japanese cuisine.

    Science.gov (United States)

    Ohtsubo, Yohsuke

    2009-12-01

    Billing and Sherman proposed the antimicrobial hypothesis to explain the worldwide spice use pattern. The present study explored whether two antimicrobial ingredients (i.e. spices and vinegar) are used in ways consistent with the antimicrobial hypothesis. Four specific predictions were tested: meat-based recipes would call for more spices/vinegar than vegetable-based recipes; summer recipes would call for more spices/vinegar than winter recipes; recipes in hotter regions would call for more spices/vinegar; and recipes including unheated ingredients would call for more spices/vinegar. Spice/vinegar use patterns were compiled from two types of traditional Japanese cookbooks. Dataset I included recipes provided by elderly Japanese housewives. Dataset II included recipes provided by experts in traditional Japanese foods. The analyses of Dataset I revealed that the vinegar use pattern conformed to the predictions. In contrast, analyses of Dataset II generally supported the predictions in terms of spices, but not vinegar.

  7. The essential ingredients of successful strategic planning and its implementation.

    Science.gov (United States)

    Deroth, L

    1990-09-01

    The strategic planning process initiated by the Pew Foundation through the Pritchard Report became a major preoccupation of all of the 31 faculties of veterinary medicine in the United States and Canada. It is proposed that, in order to be successful in the strategic planning process, three determinants related to perception, to personality, and to psychosocial behavior are necessary ingredients. First, the professional program should evolve in a team-spirited milieu which can inspire future veterinarians to work in teams. Second, all channels of communication should be kept open. Third, passion and enthusiasm should be the prevailing and all-encompassing characteristics of faculty endeavors. Team-spirit, communication and enthusiasm are the essential ingredients which will be needed to confront the challenges facing the profession, to look towards the future with tremendous hope, and to embrace the 21st century with eagerness.

  8. Mycosporine-Like Amino Acids: Potential Health and Beauty Ingredients

    Directory of Open Access Journals (Sweden)

    Ewelina Chrapusta

    2017-10-01

    Full Text Available Human skin is constantly exposed to damaging ultraviolet radiation (UVR, which induces a number of acute and chronic disorders. To reduce the risk of UV-induced skin injury, people apply an additional external protection in the form of cosmetic products containing sunscreens. Nowadays, because of the use of some chemical filters raises a lot of controversies, research focuses on exploring novel, fully safe and highly efficient natural UV-absorbing compounds that could be used as active ingredients in sun care products. A promising alternative is the application of multifunctional mycosporine-like amino acids (MAAs, which can effectively compete with commercially available filters. Here, we outline a complete characterization of these compounds and discuss their enormous biotechnological potential with special emphasis on their use as sunscreens, activators of cells proliferation, anti-cancer agents, anti-photoaging molecules, stimulators of skin renewal, and functional ingredients of UV-protective biomaterials.

  9. Encapsulation of health-promoting ingredients: applications in foodstuffs.

    Science.gov (United States)

    Tolve, Roberta; Galgano, Fernanda; Caruso, Marisa Carmela; Tchuenbou-Magaia, Fideline Laure; Condelli, Nicola; Favati, Fabio; Zhang, Zhibing

    2016-12-01

    Many nutritional experts and food scientists are interested in developing functional foods containing bioactive agents and many of these health-promoting ingredients may benefit from nano/micro-encapsulation technology. Encapsulation has been proven useful to improve the physical and the chemical stability of bioactive agents, as well as their bioavailability and efficacy, enabling their incorporation into a wide range of formulations aimed to functional food production. There are several reviews concerning nano/micro-encapsulation techniques, but none are focused on the incorporation of the bioactive agents into food matrices. The aim of this paper was to investigate the development of microencapsulated food, taking into account the different bioactive ingredients, the variety of processes, techniques and coating materials that can be used for this purpose.

  10. Contact dermatitis due to cosmetics and their ingredients

    Directory of Open Access Journals (Sweden)

    Dogra A

    1994-01-01

    Full Text Available Patches of common cosmetics like lipstick, sindhoor, cold cream, eyebrow pencil, rouge, bindi and their ingredients including methyl paraben, colophony, para phenylene diamine, balsam peru, cetostearyl alcohol, formaldehyde, lanolin, beeswax and liquid paraffin were applied in 200 females. Ingredients of cosmetics showed more frequent sensitivity as compared to the cosmetics applied as such. Para phenylene diamine (35% being the most common allergen followed by balsam peru (22.5% and parabens (19.25%. The least common allergen was liquid paraffin (0.5%. Among cosmetics, the most common agent was sindhoor (5.5% followed by lipstick (5.1% cold cream (3.75% rouge (2%, bindi (1.75% and eyebrow pencil (1.5%

  11. Environmental persistence of porcine coronaviruses in feed and feed ingredients.

    Directory of Open Access Journals (Sweden)

    Michaela P Trudeau

    Full Text Available Porcine Epidemic Diarrhea Virus (PEDV, Porcine Delta Corona Virus (PDCoV, and Transmissible Gastroenteritis Virus (TGEV are major threats to swine health and contaminated feed plays a role in virus transmission. The objective of our study was to characterize inactivation of PEDV, PDCoV, and TGEV in various feed ingredient matrices. Samples of complete feed, spray dried porcine plasma, meat meal, meat and bone meal, blood meal, corn, soybean meal, and corn dried distillers grains with solubles were weighed (5 g/sample into scintillation vials and inoculated with 1 mL of PEDV, PDCoV, or TGEV. Samples were incubated at room temperature for up to 56 days. Aliquots were removed at various time points followed by preparing serial 10-fold dilutions and inoculating in cell cultures to determine the amount of surviving virus. Inactivation kinetics were determined using the Weibull model, which estimates a delta value indicating the time necessary to reduce virus concentration by 1 log. Delta values of various ingredients were compared and analyzed as to their nutrient composition. Soybean meal had the greatest delta value (7.50 days for PEDV (P < 0.06 as compared with all other ingredients. High delta values (P < 0.001 were observed in soybean meal for PDCoV (42.04 days and TGEV (42.00 days. There was a moderate correlation between moisture content and the delta value for PDCoV (r = 0.49, P = 0.01 and TGEV (r = 0.41, P = 0.02. There was also a moderate negative correlation between TGEV survival and ether extract content (r = -0.51, P = 0.01. In conclusion, these results indicate that the first log reduction of PDCoV and TGEV takes the greatest amount of time in soybean meal. In addition to this, moisture and ether content appear to be an important determinant of virus survival in feed ingredients.

  12. The essential ingredients of successful strategic planning and its implementation

    OpenAIRE

    DeRoth, Laszlo

    1990-01-01

    The strategic planning process initiated by the Pew Foundation through the Pritchard Report became a major preoccupation of all of the 31 faculties of veterinary medicine in the United States and Canada. It is proposed that, in order to be successful in the strategic planning process, three determinants related to perception, to personality, and to psychosocial behavior are necessary ingredients. First, the professional program should evolve in a team-spirited milieu which can inspire future ...

  13. Vegetable fats and oils as functional ingredients in meat products

    Directory of Open Access Journals (Sweden)

    Alfonso Totosaus

    2011-12-01

    Full Text Available Sausages are a widely consumed food in México, and due to their low fat content (ca. 10% they can be employed to enrich diet by including functional or nutraceutic ingredients as vegetable fats and oils. The replace or incorporation of vegetable fats or oils in cooked sausages is a way to improve their nutritional profile to offer functional meat products.

  14. Galloyl-RGD as a new cosmetic ingredient

    Science.gov (United States)

    2014-01-01

    Background The cosmetics market has rapidly increased over the last years. For example, in 2011 it reached 242.8 billion US dollars, which was a 3.9% increase compared to 2010. There have been many recent trials aimed at finding the functional ingredients for new cosmetics. Gallic acid is a phytochemical derived from various herbs, and has anti-fungal, anti-viral, and antioxidant properties. Although phytochemicals are useful as cosmetic ingredients, they have a number of drawbacks, such as thermal stability, residence time in the skin, and permeability through the dermal layer. To overcome these problems, we considered conjugation of gallic acid with a peptide. Results We synthesized galloyl-RGD, which represents a conjugate of gallic acid and the peptide RGD, purified it by HPLC and characterized by MALDI-TOF with the aim of using it as a new cosmetic ingredient. Thermal stability of galloyl-RGD was tested at alternating temperatures (consecutive 4°C, 20°C, or 40°C for 8 h each) on days 2, 21, 41, and 61. Galloyl-RGD was relatively safe to HaCaT keratinocytes, as their viability after 48 h incubation with 500 ppm galloyl-RGD was 93.53%. In the group treated with 50 ppm galloyl-RGD, 85.0% of free radicals were removed, whereas 1000 ppm galloyl-RGD suppressed not only L-DOPA formation (43.8%) but also L-DOPA oxidation (54.4%). Conclusions Galloyl-RGD is a promising candidate for a cosmetic ingredient. PMID:25103826

  15. FORMULATION AND EVALUATION OF LIPSTICKS CONTAINING NATURAL INGREDIENTS

    OpenAIRE

    Gouri Kumar Dash*, Nur Anis Amira Mohd Anas and Shahnaz Majeed

    2017-01-01

    The use of lipsticks has gained considerable importance in recent years and several cosmetic industries have geared up their marketing with different shades of colors to meet the demands of women. Many lipsticks often contain synthetic chemicals that are known to cause serious side effects upon prolonged use. In the present study, we have made an attempt to formulate lipsticks that contained only natural ingredients using extracts of the flowers of Hibiscus rosa-sinensis, juice of the roots o...

  16. Mineralogical characterization of chemically isolated ingredients from biomass

    International Nuclear Information System (INIS)

    Haykiri-Acma, H.; Yaman, S.; Alkan, M.; Kucukbayrak, S.

    2014-01-01

    Highlights: • Isolation methods have an intrinsic weakness. • Isolated ingredients contain no ignorable inorganics in different forms. • The first study dealing with the mineral phases in isolated lignin and holocellulose. - Abstract: The complex structure of biomass materials can be studied by means of a number of different techniques. Of which, chemical isolation of macromolecular biomass ingredients such as lignin, hemicellulose, and cellulose, and then characterization of each isolated ingredient has been a common practice. However, the isolated individual ingredients have always been regarded as pure materials, and so far potential inorganic impurities resulting from the parent biomass have not been considered. Accordingly, this paper focuses on the determination of inorganics, if any, in the isolated parts of biomass. For this, two different biomass species such as hybrid poplar wood and apricot stones have been subjected to sequential isolation procedures of ASTM D1105, Wise’s Chlorite Method, and van Soest’s Method. The isolated holocellulose (hemicellulose + cellulose), lignin, and extractives-free bulk were then characterized mineralogically by X-ray Diffraction (XRD) and X-ray Fluorescence (XRF) techniques, and the results were compared with those for the parent biomass species. It was found that the isolated holocelluloses and lignins are not just ash-free and they have ash contents up to 2.2% and 4.0%, respectively. Also, various minerals including potassium chloride, several phosphate minerals, and alumina silicates were found to survive after chemical treatments applied during isolation. In addition, several heavy metals were also detected. These results reveal that minerals cannot be eliminated entirely because of the natures of the chemicals used, and they unavoidably remain in the isolated macromolecules

  17. Actellic 2% dust as pesticide in feed ingredients: Effects on ...

    African Journals Online (AJOL)

    A uniform diet was compounded from ingredients certified to be apparently pesticide residue-free. This diet was partitioned into 5 sub-diets. The first partition A had no residue, serving as control, while B, C, D, and E had 0.01, 0.02, 0.03 and 0.04% inclusion of the Actellic 2% dust, respectively. A total of 20 rabbits of mixed ...

  18. the amino acid composition of selected south african feed ingredients

    African Journals Online (AJOL)

    Samples (25 mg) of each milled ingredient were measured in duplicate into rimless pyrex test tubes (l2 X 150 mm). One of each pair of tubes was for the analysis for all the amino acids except cystine and tryptophan. To this tube, 6 mol dm -t - hydrochloric acid (3 cm.r) was added. The mixture was frozen in an acetone/dry ice.

  19. VALUATION OF THE EFFECTS OF VARIATION IN INGREDIENT ...

    African Journals Online (AJOL)

    The semimembranous muscle from singed beef carcass was trimmed of all visible bones and connective tissue. The meat was sliced into thin sheet of 0.15 – 0.3cm thick and between 5.0 – 9.0 cm long. The experiment comprised of five treatments. Treatment one (T1) In served as the control, with all ingredients present ...

  20. Encapsulation and delivery of food ingredients using starch based systems.

    Science.gov (United States)

    Zhu, Fan

    2017-08-15

    Functional ingredients can be encapsulated by various wall materials for controlled release in food and digestion systems. Starch, as one of the most abundant natural carbohydrate polymers, is non-allergenic, GRAS, and cheap. There has been increasing interest of using starch in native and modified forms to encapsulate food ingredients such as flavours, lipids, polyphenols, carotenoids, vitamins, enzymes, and probiotics. Starches from various botanical sources in granular or amorphous forms are modified by chemical, physical, and/or enzymatic means to obtain the desired properties for targeted encapsulation. Other wall materials are also employed in combination with starch to facilitate some types of encapsulation. Various methods of crafting the starch-based encapsulation such as electrospinning, spray drying, antisolvent, amylose inclusion complexation, and nano-emulsification are introduced in this mini-review. The physicochemical and structural properties of the particles are described. The encapsulation systems can positively influence the controlled release of food ingredients in food and nutritional applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Botanicals and anti-inflammatories: natural ingredients for rosacea.

    Science.gov (United States)

    Emer, Jason; Waldorf, Heidi; Berson, Diane

    2011-09-01

    Rosacea is a chronic inflammatory skin condition characterized by cutaneous hypersensitivity. There are many therapeutic options available for the treatment of rosacea, but none are curative. Since the pathogenesis of rosacea remains elusive, it is not surprising that no single treatment is paramount and that many patients find therapies unsatisfactory or even exacerbating. Treatments are prescribed to work in concert with each other in order to ameliorate the common clinical manifestations, which include: papules and pustules, telangiectasias, erythema, gland hypertrophy, and ocular disease. The most validated topical therapies include metronidazole, azelaic acid, and sodium sulfacetamide-sulfur. Many other topical therapies, such as calcineurin inhibitors, benzoyl peroxide, clindamycin, retinoids, topical corticosteroids, and permethrin have demonstrated varying degrees of success. Due to the inconsistent results of the aforementioned therapies patients are increasingly turning to alternative products containing natural ingredients or botanicals to ease inflammation and remit disease. Additional research is needed to elucidate the benefits of these ingredients in the management of rosacea, but some important considerations regarding the natural ingredients with clinical data will be discussed here. Copyright © 2011 Elsevier Inc. All rights reserved.

  2. Top 10 botanical ingredients in 2010 anti-aging creams.

    Science.gov (United States)

    Cronin, Hyland; Draelos, Zoe Diana

    2010-09-01

    New developments in the realm of skin rejuvenation such as phytotherapy are at an astounding increasing pace in the cosmeceutical market. Yet, many of these products that are classified as cosmeceuticals are tested less vigorously and do not have to be approved by the Food and Drug Administration to establish efficacy and safety. Thus, as clinicians, we must ask the question, "Is there science-based evidence to validate the mechanism of these new treatments?" We assessed the top anti-aging creams currently on the market specifically evaluating their botanical ingredients. Some of the most common botanicals that are hot off the market are: Rosmarinus officinalis, Vitis vinifera (grape seed extract), Citronellol, Limonene, Oenothera biennis (evening primrose), Glycyrrhiza glabra (licorice extract), Aframomum angustifolium seed extract, Diosgenin (wild yam), N6 furfuryladenine (kinetin), and Ergothioneine. Through researching each of these botanical ingredients, we have concluded that randomized controlled trials are still needed in this area, but there is promise in some of these ingredients and science to validate them. © 2010 Wiley Periodicals, Inc.

  3. Writing implementation research grant proposals: ten key ingredients

    Directory of Open Access Journals (Sweden)

    Proctor Enola K

    2012-10-01

    Full Text Available Abstract Background All investigators seeking funding to conduct implementation research face the challenges of preparing a high-quality proposal and demonstrating their capacity to conduct the proposed study. Applicants need to demonstrate the progressive nature of their research agenda and their ability to build cumulatively upon the literature and their own preliminary studies. Because implementation science is an emerging field involving complex and multilevel processes, many investigators may not feel equipped to write competitive proposals, and this concern is pronounced among early stage implementation researchers. Discussion This article addresses the challenges of preparing grant applications that succeed in the emerging field of dissemination and implementation. We summarize ten ingredients that are important in implementation research grants. For each, we provide examples of how preliminary data, background literature, and narrative detail in the application can strengthen the application. Summary Every investigator struggles with the challenge of fitting into a page-limited application the research background, methodological detail, and information that can convey the project’s feasibility and likelihood of success. While no application can include a high level of detail about every ingredient, addressing the ten ingredients summarized in this article can help assure reviewers of the significance, feasibility, and impact of the proposed research.

  4. Stabilising emulsion-based colloidal structures with mixed food ingredients.

    Science.gov (United States)

    Dickinson, Eric

    2013-03-15

    The physical scientist views food as a complex form of soft matter. The complexity has its origin in the numerous ingredients that are typically mixed together and the subtle variations in microstructure and texture induced by thermal and mechanical processing. The colloid science approach to food product formulation is based on the assumption that the major product attributes such as appearance, rheology and physical stability are determined by the spatial distribution and interactions of a small number of generic structural entities (biopolymers, particles, droplets, bubbles, crystals) organised in various kinds of structural arrangements (layers, complexes, aggregates, networks). This review describes some recent advances in this field with reference to three discrete classes of dispersed systems: particle-stabilised emulsions, emulsion gels and aerated emulsions. Particular attention is directed towards explaining the crucial role of the macromolecular ingredients (proteins and polysaccharides) in controlling the formation and stabilisation of the colloidal structures. The ultimate objective of this research is to provide the basic physicochemical insight required for the reliable manufacture of novel structured foods with an appealing taste and texture, whilst incorporating a more healthy set of ingredients than those found in many existing traditional products. © 2012 Society of Chemical Industry.

  5. Safety Evaluation of Cosmetic Ingredients Regarding Their Skin Sensitization Potential

    Directory of Open Access Journals (Sweden)

    Winfried Steiling

    2016-03-01

    Full Text Available Up to today, product safety evaluation in the EU is predominantly based on data/information on their individual ingredients. Consequently, the quality and reliability of individual ingredient data is of vital interest. In this context, the knowledge about skin sensitization potential is an explicit need for both hazard and risk assessment. Proper skin sensitization data of the individual chemicals is essential, especially when dermal contact is intended, like for cosmetics. In some cases, e.g., in the presence of irritating chemicals, the combination of individual ingredients may also need to be evaluated to cover possible mixture effects. Today, it seems unlikely or even impossible that skin sensitization in humans can be adequately described by a single test result or even by a simple combination of a few data points (in vivo or in vitro. It is becoming evident that a set of data (including human data and market data and knowledge about the ingredient’s specific sensitizing potency needs to be taken into account to enable a reliable assessment of skin sensitization. A more in-depth understanding on mechanistic details of the Adverse-Outcome-Pathway of skin sensitization could contribute key data for a robust conclusion on skin sensitization.

  6. Nano-microdelivery systems for oral delivery of an active ingredient

    DEFF Research Database (Denmark)

    2014-01-01

    A composition for oral delivery of one or more active ingredients in the form of a lipid nano-micro-delivery system comprising a lipid nano-micro-structure comprising at least one lipid and at least one active ingredient, said at least one active ingredient being immobilized in said lipid nano...

  7. 21 CFR 700.18 - Use of chloroform as an ingredient in cosmetic products.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Use of chloroform as an ingredient in cosmetic... SERVICES (CONTINUED) COSMETICS GENERAL Requirements for Specific Cosmetic Products § 700.18 Use of chloroform as an ingredient in cosmetic products. (a) Chloroform has been used as an ingredient in cosmetic...

  8. 9 CFR 318.6 - Requirements concerning ingredients and other articles used in preparation of products.

    Science.gov (United States)

    2010-01-01

    ... and other articles used in preparation of products. 318.6 Section 318.6 Animals and Animal Products... ingredients and other articles used in preparation of products. (a) All ingredients and other articles used in... products. (11) (12) Ingredients for use in any product may not bear or contain any pesticide chemical or...

  9. Effect of Early- and Adult-Life Socioeconomic Circumstances on Physical Inactivity.

    Science.gov (United States)

    Cheval, Boris; Sieber, Stefan; Guessous, Idris; Orsholits, Dan; Courvoisier, Delphine S; Kliegel, Matthias; Stringhini, Silvia; Swinnen, Stephan P; Burton-Jeangros, Claudine; Cullati, Stéphane; Boisgontier, Matthieu P

    2018-03-01

    This study aimed to investigate the associations between early- and adult-life socioeconomic circumstances and physical inactivity (level and evolution) in aging using large-scale longitudinal data. This study used the Survey of Health Ageing and Retirement in Europe, a 10-yr population-based cohort study with repeated measurements in five waves, every 2 yr between 2004 and 2013. Self-reported physical inactivity (waves 1, 2, 4, and 5), household income (waves 1, 2, 4, and 5), educational attainment (wave of the first measurement occasion), and early-life socioeconomic circumstance (wave 3) were collected in 22,846 individuals 50 to 95 yr of age. Risk of physical inactivity was increased for women with the most disadvantaged early-life socioeconomic circumstances (odds ratio [OR], 1.49; 95% confidence interval [CI], 1.20-1.86). With aging, the risk of physical inactivity increased for both sexes and was strongest for those with the most disadvantaged early-life socioeconomic circumstances (OR, 1.04 (95% CI, 1.02-1.06) for women; OR, 1.02 (95% CI, 1.00-1.05) for men), with the former effect being more robust than the latter one. The association between early-life socioeconomic circumstances and physical inactivity was mediated by adult-life socioeconomic circumstances, with education being the strongest mediator. Early-life socioeconomic circumstances predicted high levels of physical inactivity at older ages, but this effect was mediated by socioeconomic indicators in adult life. This finding has implications for public health policies, which should continue to promote education to reduce physical inactivity in people at older ages and to ensure optimal healthy aging trajectories, especially among women with disadvantaged early-life socioeconomic circumstances.

  10. Marital Status, the Economic Benefits of Marriage, and Days of Inactivity due to Poor Health

    Directory of Open Access Journals (Sweden)

    Jim P. Stimpson

    2012-01-01

    Full Text Available Purpose. This study explored whether the economic benefits of marriage mediate the association between marriage and health and if that relationship is conditional on the level of shared economic resources. Methods. Pooled, cross-sectional data from NHANES 2001–2006 were analyzed using multivariate zero-inflated negative binomial regression for the number of days of inactivity due to poor physical or mental health. Results. Persons that were divorced/separated reported the highest average number of days of inactivity (mean = 2.5 within a 30 day period, and married persons reported the lowest number of days of inactivity (mean = 1.4. Multivariate results indicated that widowed persons did not report significantly more days of inactivity than married persons. Income to poverty ratio reduced the size and eliminated statistical significance of the difference between divorced/separated and never married marital statuses compared to married persons. The interaction effect for marital status and income to poverty ratio was statistically significant suggesting that the relationship between marital status and inactivity is conditional on shared income. Conclusion. Marriage confers health protective benefits in part through pooled income relative to other marital statuses.

  11. Activity, inactivity, and screen time in relation to weight and fatness over adolescence in girls.

    Science.gov (United States)

    Must, Aviva; Bandini, Linda G; Tybor, David J; Phillips, Sarah M; Naumova, Elena N; Dietz, William H

    2007-07-01

    The impact of activity and inactivity on relative weight and fatness change are best evaluated longitudinally. We examined the longitudinal relationship of physical activity, inactivity, and screen time with relative weight status and percentage body fat (%BF) and explored how it differed by parental overweight status. Non-obese pre-menarcheal girls (173), 8 to 12 years old, were followed until 4 years post-menarche. %BF, BMI z-score, and time spent sleeping, sitting, standing, walking, and in vigorous activity were assessed annually. We developed a physical activity index to reflect time and intensity of activity. Inactivity was defined as the sum of time spent sleeping, sitting, and standing. Screen time was defined as time spent viewing television, videotapes, or playing video games. Parental overweight was defined as at least one parent with BMI>25. In separate linear mixed effects models, activity, inactivity, and screen time were unrelated to BMI z-score longitudinally, with and without accounting for parental overweight. After controlling for parental overweight, activity was inversely related (phistory of overweight represent a target population of high priority for interventions around physical activity and inactivity.

  12. Radiolabelling of potential colonic delivery systems by neutron activation. An evaluation based on physiochemical properties of excipients and formulations

    International Nuclear Information System (INIS)

    Ahrabi, Sayeh

    1999-01-01

    The effects of neutron irradiation on the physicochemical properties of some potential release-controlling excipients for oral delivery to colon (based on microbially degradable polysaccharide or a combination of pH- and time-dependent mechanisms) were initially investigated. The aim was to choose the most irradiation-resistant ones for the development of a colonic delivery system to be radiolabelled by the neutron activation procedure. However, no correlation between the extent of irradiation-induced changes of the release-controlling polymers and the in vitro properties of the final formulation was observed. Incorporation of samarium oxide (Sm 2 O 3 ) resulted in retardation of the drug release through the diffusion layer. The influence of neutron activation factors on the properties of some suppository combinations was also studied. The effect of the admixture of Sm 2 O 3 on the dissolution and disintegration of the suppositories was more profound than the effect of neutron irradiation. In hydrophilic suppositories, the effect of Sm 2 O 3 was dependent on the type, amount and the physicochemical characteristics of the incorporated drug. In lipophilic suppositories, the release-controlling effect of Sm 2 O 3 was hypothesised to be due to its insoluble micronised particles blocking the drug diffusion layer. The neutron activation procedure could be utilised for radiolabelling potential oral and rectal colonic drug delivery systems. However, to avoid alteration in the crucial in vitro characteristics of the formulations, the amount, the particle size and the aggregated particle characteristics of the lanthanide salt (e.g. Sm 2 O 3 or samarium stearate) together with the neutron irradiation dose should be controlled precisely for each dosage system. For the systems investigated in this work the release-controlling mechanism of the dosage form seems to be a key parameter to predict the extent of the influence of neutron activation factors on the in vitro properties

  13. Safety assessment of Vitis vinifera (grape)-derived ingredients as used in cosmetics.

    Science.gov (United States)

    Fiume, Monice M; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2014-01-01

    The Cosmetic Ingredient Review Expert Panel (Panel) assessed the safety of 24 Vitis vinifera (grape)-derived ingredients and found them safe in the present practices of use and concentration in cosmetics. These ingredients function in cosmetics mostly as skin-conditioning agents, but some function as antioxidants, flavoring agents, and/or colorants. The Panel reviewed the available animal and clinical data to determine the safety of these ingredients. Additionally, some constituents of grapes have been assessed previously for safety as cosmetic ingredients by the Panel, and others are compounds that have been discussed in previous Panel safety assessments. © The Author(s) 2014.

  14. Amended safety assessment of Hypericum perforatum-derived ingredients as used in cosmetics.

    Science.gov (United States)

    Becker, Lillian C; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2014-01-01

    The Cosmetic Ingredient Review Expert Panel (Panel) has issued an amended safety assessment of 7 Hypericum perforatum-derived ingredients as used in cosmetics. A common name for this plant is St John wort. These ingredients function in cosmetics as skin-conditioning agents-miscellaneous and antimicrobial agents. The Panel reviewed relevant animal and human data related to the H perforatum-derived ingredients. Because formulators may use more than 1 botanical ingredient in a formulation, caution was urged to avoid levels of toxicological concern for constituent chemicals and impurities. The Panel concluded that H perforatum-derived ingredients were safe as cosmetic ingredients in the practices of use and concentration as described in this safety assessment. © The Author(s) 2014.

  15. Testing the role of action and inaction anticipated regret on intentions and behaviour.

    Science.gov (United States)

    Sandberg, Tracy; Hutter, Russell; Richetin, Juliette; Conner, Mark

    2016-09-01

    Anticipated regret (AR) has been suggested as a useful addition to the theory of planned behaviour (TPB) that captures affective influences. However, previous research has generally (1) assessed the impact of AR in relation to one behaviour (action or inaction) when considering TPB variables in relation to the alternative behaviour, (2) not controlled for affective attitudes or past behaviour, and (3) examined only one or two behaviours. In two studies across several behaviours, the present research showed that even when controlling for affective attitudes, past behaviour, and other TPB variables towards action, action and inaction AR each added to the prediction of intentions across multiple behaviours. The two studies also showed that inaction regret was generally the stronger predictor, although action regret was important for some types of behaviour. Implications and issues for further research are discussed. © 2016 The British Psychological Society.

  16. Unemployment, Employment and Inactivity in Denmark: An Analysis of Event History Data

    DEFF Research Database (Denmark)

    Lauzadyté, Agné

    In this paper I estimate a discrete time hazard model for the exits from the different labour market states - unemployment, employment and inactivity (or OLF) - in the Danish labour market. I find that women and individuals over fifty are more likely to experience the long-term unemployment...... and inactivity. The less educated and unskilled workers are found to be another risk group to face the marginalisation from the labour market. Being previously employed reduces the risk of OLF, and increases the re-entry to employment probability, while living in the biggest Danish cities makes persons...... disadvantaged. These give the evidence that the "Flexicurity"model makes the weakest individuals disadvantaged in the Danish labour market. And finally, I find that those, who survived in a job one year, tend to remain employed, while persons, longer than one year inactive, face much higher risk...

  17. Environmental persistence of porcine coronaviruses in feed and feed ingredients.

    Science.gov (United States)

    Trudeau, Michaela P; Verma, Harsha; Sampedro, Fernando; Urriola, Pedro E; Shurson, Gerald C; Goyal, Sagar M

    2017-01-01

    Porcine Epidemic Diarrhea Virus (PEDV), Porcine Delta Corona Virus (PDCoV), and Transmissible Gastroenteritis Virus (TGEV) are major threats to swine health and contaminated feed plays a role in virus transmission. The objective of our study was to characterize inactivation of PEDV, PDCoV, and TGEV in various feed ingredient matrices. Samples of complete feed, spray dried porcine plasma, meat meal, meat and bone meal, blood meal, corn, soybean meal, and corn dried distillers grains with solubles were weighed (5 g/sample) into scintillation vials and inoculated with 1 mL of PEDV, PDCoV, or TGEV. Samples were incubated at room temperature for up to 56 days. Aliquots were removed at various time points followed by preparing serial 10-fold dilutions and inoculating in cell cultures to determine the amount of surviving virus. Inactivation kinetics were determined using the Weibull model, which estimates a delta value indicating the time necessary to reduce virus concentration by 1 log. Delta values of various ingredients were compared and analyzed as to their nutrient composition. Soybean meal had the greatest delta value (7.50 days) for PEDV (P TGEV (42.00 days). There was a moderate correlation between moisture content and the delta value for PDCoV (r = 0.49, P = 0.01) and TGEV (r = 0.41, P = 0.02). There was also a moderate negative correlation between TGEV survival and ether extract content (r = -0.51, P = 0.01). In conclusion, these results indicate that the first log reduction of PDCoV and TGEV takes the greatest amount of time in soybean meal. In addition to this, moisture and ether content appear to be an important determinant of virus survival in feed ingredients.

  18. Choleretic Activity of Turmeric and its Active Ingredients.

    Science.gov (United States)

    Wang, Yonglu; Wang, Liyao; Zhu, Xinyi; Wang, Dong; Li, Xueming

    2016-07-01

    Turmeric, a rhizome of Curcumin longa L. is widely used as both a spice and an herbal medicine. The traditional use of turmeric in gastroenterology is mainly based on its choleretic activity. The aim of this study is to determine the effects of turmeric on bile flow (BF) and total bile acids (TBAs) excretion in a bile fistula rat model after acute duodenal administration. A significant dose-dependent enhancement in both BF and TBAs was detected after treatment with the turmeric decoctions which suggested the choleretic activity was bile acid-dependent secretion. In order to direct the active group of compounds, aqueous (AE), ethyl acetate (EtOAc), and petroleum ether (PE) extracts were investigated. The EtOAc and PE extracts showing high effects were purified to locate the active ingredients. Three curcuminoids (curcumin, demethoxycurcumin, and bisdemethoxycurcumin) and 2 sesquiterpenes (bisacurone B and ar-turmerone) were isolated. It was found Bisacurone B was the most potent choleretic ingredient followed by ar-turmerone, bisdemethoxycurcumin demethoxycurcumin, and then curcumin. The amounts of the active ingredients were quantitatively analyzed by high-performance liquid chromatography. The EtOAc and PE extracts had high sesquiterpenes and curcuminoids content, while the AE extract had poor content of sesquiterpenes and curcuminoids which affected neither BF nor TBAs. Based on the results of multiple linear regression analysis, the content of BIS and TUR were dominant factors (P < 0.01) of controlling BL and TBAs in EtOAC and PE extracts. © 2016 Institute of Food Technologists®

  19. Surveying Situation of Active and Inactive Elder Men Nutrition Health in Shiraz City

    Directory of Open Access Journals (Sweden)

    Abdolsaleh Zar

    2007-04-01

    Full Text Available Objectives: Toady with growth of different sciences, amount of dies decrease and life hope is going to increase, so world population tends to old ages. In old ages physiologic changes effect on nutrition needs, therefore nutrition cares have the most important role in their health improvement. The goal of this study is the surveying situation of active and inactive elder men nutrition health in shiraz city. Methods & Materials: This study has a descriptive method and for these purpose, we randomly selected 156 elder men upper than 60 years old from 4 main park's of shiraz as statistical sample. They divided into two elder groups by their physical activities' active elder' and 'inactive elder'. We use of investigate health situation questioner as our instrument in this study. Results: Findings show that 34.61% of 156 elder men (35 active and 19 inactive elder have a suitable nutrition situation and 37.81% of them (28 active and 31 inactive elder are in average danger of malnutrition and 27.56% (15 active and 28 inactive elder of them are in high danger of malnutrition. Conclusion: Results of this study show that generally old ages don't have a satisfy nutrition situation, although active old age have a better level rather than inactive ones. Therefore physical activities could have a positive role in old age healthy nutrition. It is necessary to plan suitable strategies for protecting and educating old age nutrition in order to improve and correct their diet. Also propagation of physical activities by organization and vast media is suggested.

  20. Changes in diagnosed diabetes, obesity, and physical inactivity prevalence in US counties, 2004-2012.

    Directory of Open Access Journals (Sweden)

    Linda S Geiss

    Full Text Available Recent studies suggest that prevalence of diagnosed diabetes in the United States reached a plateau or slowed around 2008, and that this change coincided with obesity plateaus and increases in physical activity. However, national estimates can obscure important variations in geographic subgroups. We examine whether a slowing or leveling off in diagnosed diabetes, obesity, and leisure time physical inactivity prevalence is also evident across the 3143 counties of the United States. We used publicly available county estimates of the age-adjusted prevalence of diagnosed diabetes, obesity, and leisure-time physical inactivity, which were generated by the Centers for Disease Control and Prevention (CDC. Using a Bayesian multilevel regression that included random effects by county and year and applied cubic splines to smooth these estimates over time, we estimated the average annual percentage point change (APPC from 2004 to 2008 and from 2008 to 2012 for diabetes, obesity, and physical inactivity prevalence in each county. Compared to 2004-2008, the median APPCs for diabetes, obesity, and physical inactivity were lower in 2008-2012 (diabetes APPC difference = 0.16, 95%CI 0.14, 0.18; obesity APPC difference = 0.65, 95%CI 0.59, 0.70; physical inactivity APPC difference = 0.43, 95%CI 0.37, 0.48. APPCs and APPC differences between time periods varied among counties and U.S. regions. Despite improvements, levels of these risk factors remained high with most counties merely slowing rather than reversing, which suggests that all counties would likely benefit from reductions in these risk factors. The diversity of trajectories in the prevalence of these risk factors across counties underscores the continued need to identify high risk areas and populations for preventive interventions. Awareness of how these factors are changing might assist local policy makers in targeting and tracking the impact of efforts to reduce diabetes, obesity and physical inactivity.

  1. Linking geology and microbiology: inactive pockmarks affect sediment microbial community structure.

    Science.gov (United States)

    Haverkamp, Thomas H A; Hammer, Øyvind; Jakobsen, Kjetill S

    2014-01-01

    Pockmarks are geological features that are found on the bottom of lakes and oceans all over the globe. Some are active, seeping oil or methane, while others are inactive. Active pockmarks are well studied since they harbor specialized microbial communities that proliferate on the seeping compounds. Such communities are not found in inactive pockmarks. Interestingly, inactive pockmarks are known to have different macrofaunal communities compared to the surrounding sediments. It is undetermined what the microbial composition of inactive pockmarks is and if it shows a similar pattern as the macrofauna. The Norwegian Oslofjord contains many inactive pockmarks and they are well suited to study the influence of these geological features on the microbial community in the sediment. Here we present a detailed analysis of the microbial communities found in three inactive pockmarks and two control samples at two core depth intervals. The communities were analyzed using high-throughput amplicon sequencing of the 16S rRNA V3 region. Microbial communities of surface pockmark sediments were indistinguishable from communities found in the surrounding seabed. In contrast, pockmark communities at 40 cm sediment depth had a significantly different community structure from normal sediments at the same depth. Statistical analysis of chemical variables indicated significant differences in the concentrations of total carbon and non-particulate organic carbon between 40 cm pockmarks and reference sample sediments. We discuss these results in comparison with the taxonomic classification of the OTUs identified in our samples. Our results indicate that microbial communities at the sediment surface are affected by the water column, while the deeper (40 cm) sediment communities are affected by local conditions within the sediment.

  2. Linking geology and microbiology: inactive pockmarks affect sediment microbial community structure.

    Directory of Open Access Journals (Sweden)

    Thomas H A Haverkamp

    Full Text Available Pockmarks are geological features that are found on the bottom of lakes and oceans all over the globe. Some are active, seeping oil or methane, while others are inactive. Active pockmarks are well studied since they harbor specialized microbial communities that proliferate on the seeping compounds. Such communities are not found in inactive pockmarks. Interestingly, inactive pockmarks are known to have different macrofaunal communities compared to the surrounding sediments. It is undetermined what the microbial composition of inactive pockmarks is and if it shows a similar pattern as the macrofauna. The Norwegian Oslofjord contains many inactive pockmarks and they are well suited to study the influence of these geological features on the microbial community in the sediment. Here we present a detailed analysis of the microbial communities found in three inactive pockmarks and two control samples at two core depth intervals. The communities were analyzed using high-throughput amplicon sequencing of the 16S rRNA V3 region. Microbial communities of surface pockmark sediments were indistinguishable from communities found in the surrounding seabed. In contrast, pockmark communities at 40 cm sediment depth had a significantly different community structure from normal sediments at the same depth. Statistical analysis of chemical variables indicated significant differences in the concentrations of total carbon and non-particulate organic carbon between 40 cm pockmarks and reference sample sediments. We discuss these results in comparison with the taxonomic classification of the OTUs identified in our samples. Our results indicate that microbial communities at the sediment surface are affected by the water column, while the deeper (40 cm sediment communities are affected by local conditions within the sediment.

  3. From physical inactivity to immobilization: Dissecting the role of oxidative stress in skeletal muscle insulin resistance and atrophy.

    Science.gov (United States)

    Pierre, Nicolas; Appriou, Zephyra; Gratas-Delamarche, Arlette; Derbré, Frédéric

    2016-09-01

    In the literature, the terms physical inactivity and immobilization are largely used as synonyms. The present review emphasizes the need to establish a clear distinction between these two situations. Physical inactivity is a behavior characterized by a lack of physical activity, whereas immobilization is a deprivation of movement for medical purpose. In agreement with these definitions, appropriate models exist to study either physical inactivity or immobilization, leading thereby to distinct conclusions. In this review, we examine the involvement of oxidative stress in skeletal muscle insulin resistance and atrophy induced by, respectively, physical inactivity and immobilization. A large body of evidence demonstrates that immobilization-induced atrophy depends on the chronic overproduction of reactive oxygen and nitrogen species (RONS). On the other hand, the involvement of RONS in physical inactivity-induced insulin resistance has not been investigated. This observation outlines the need to elucidate the mechanism by which physical inactivity promotes insulin resistance. Copyright © 2015 Elsevier Inc. All rights reserved.

  4. Estudios organolépticos, fisicoquímicos, microbiológicos e interacción con excipientes farmacéuticos de un extracto purificado de cera de Apis mellifera Organoleptic, physicochemical and microbiological studies and its interaction with pharmaceutical excipients of a purified extract from Apis mellifera wax

    Directory of Open Access Journals (Sweden)

    Víctor Luis González Canavaciolo

    2010-09-01

    Full Text Available El D-002, ingrediente activo antioxidante extraído de la cera de abejas Apis mellifera, fue caracterizado desde el punto de vista físicoquímico, de igual forma se analizó su interacción con excipientes de interés farmacéutico. El D-002 es un polvo fluido inodoro de color blanco a crema, con pérdidas por secado £ 1 %; es insoluble en agua y etanol, y muy ligeramente soluble en otros disolventes orgánicos. Su composición, determinada por cromatografía de gases, fue: 1-tetracosanol (6-15 %, 1-hexacosanol (7-20 %, 1-octacosanol (12-20 %, 1-triacontanol (25-35 % 1-dotriacontanol (18-25 % y 1-tetratriacontanol (£ 7,5 %, para una pureza ³ 85 %. Fue estable durante 5 años en la zona climática IV y su análisis por calorimetría diferencial de barrido mostró 2 transiciones de fusión a 59,0 y 81,1 °C sin descomposición, una alta estabilidad térmica hasta 200 °C, así como la ausencia de interacciones con lactosa, almidón, croscarmelosa sódica, polivinil pirrolidona, celulosa microcristalina y estearato de magnesio, lo que posibilita el empleo de estos excipientes en la formulación de las tabletas.The D002, an antioxidant active ingredient extracted from the Apis mellifera bees wax was characterized from the physicochemical point of view analyzing its interaction with excipients of pharmaceutical interest. The D-002 is a creamy white odourless fluid powder with losses by £ 1 % dry; it is water and ethanol insoluble and very slightly soluble in other organic solvents. Its composition, determined by gas chromatography was: 1-tetracosanol (6-15 %, 1-hexacosanol (7-20 %, 1-octacosanol (12-20 %, 1-triacontanol (25-35 %, 1-dotriacontanol (18-25 % and 1-tetratriacontaol (£ 7,5 % for ³ 85 % of purity. It remained stable during 5 years in the IV climatic zone and its analysis by differential scanning calorimetry showed 2 fusion transitions at 59.0 and 81.1 °C. without decomposition, a high thermal stability up to 200 °C, as well as a

  5. Solid Propellant Burning Equilibrium Ingredients Calculation Based on Temperature Iteration

    Science.gov (United States)

    Hu, Kuan; Zhang, Lin; Chang, Xinlong; Wang, Chao

    2017-07-01

    Aiming at shortcomings of depending on experiences and inferior computation accuracy brought by using linear interpolation to calculate fixed pressure burning temperature, a new method using iteration was put forward. Moreover, the optimization model to calculate equilibrium ingredients was formulated based on the new method, and sequential quadric programming method rather than Lagrange multiplier was used to compute the model. At last, a numerical example was given to validate the method in this paper. Results make show that more perfect outcomes can be achieved through the method in this paper than classical method.

  6. Consumer preferences for different combinations of carriers and functional ingredients

    DEFF Research Database (Denmark)

    Krutulyte, Rasa; Grunert, Klaus G.; Scholderer, Joachim

    Kleef, van Trijp & Luning, 2005; Patch, Tapsell & Williams, 2005). With this in mind, the present study aimed at uncovering which functional ingredients consumers accept in selected food product categories such as yoghurt, muesli bars, fish balls, tuna salad, baby meals, rye bread and liver pâté....... Furthermore, the research looks at the possible determinants of acceptance of various enrichments of these foods, mainly focusing on factors such as respondents' present and intended eating behaviour, lifestyle-related habits (i.e. smoking, exercising, drinking), and expected outcomes of consuming the food...

  7. Lithium carbonate tablets. Preparation techniques influence over active ingredient liberation

    International Nuclear Information System (INIS)

    Bueno, J.H.F.; Oliveira, A.G. de; Toledo Salgado, P.E. de

    1989-01-01

    Lithium carbonate tablets, prepared using wet and dry granulation, were assessed in vitro so as to determine the active ingredient dissolution. In this study, standardized formulations were used and developed with usual adjuvants (lactose - maize starch). Parallel to the dissolution testing. The influence of the preparation process over some physical characteristics (hardness, friability and disintegration) was also analysed. Although a better performance was observed of tables prepared using dry granulation, the authors concluded that the wet process is more suitable in preparing tables with the mentioned drug. (author)

  8. Downstream Processability of Crystal Habit-Modified Active Pharmaceutical Ingredient

    DEFF Research Database (Denmark)

    Pudasaini, Nawin; Upadhyay, Pratik Pankaj; Parker, Christian Richard

    2017-01-01

    Efficient downstream processing of active pharmaceutical ingredients (APIs) can depend strongly on their particulate properties, such as size and shape distributions. Especially in drug products with high API content, needle-like crystal habit of an API may show compromised flowability...... and tabletability, creating significant processability difficulties on a production scale. However, such a habit can be adapted to the needs of downstream processing. To this end, we modified the needle-like crystal habit of the model API 5-aminosalicylic acid (5-ASA). This study reports processability assessment...

  9. New Method for Determination of Electrically Inactive Phosphorus in n-type Emitters

    OpenAIRE

    Steyer, Michael; Dastgheib-Shirazi, Amir; Hahn, Giso; Terheiden, Barbara

    2015-01-01

    The precise knowledge of the amount and the location in depth of inactive phosphorus in an n-type emitter is still a challenge. As a new approach, we determine the total amount of phosphorus (P dose) in the emitter stepwise in dependence of etching depth with the characterization tool ICP-OES. A comparison of the data with the electrically active P concentration profile measured by ECV allows to determine in which depths electrically inactive phosphorus is present. For a highly doped emitter,...

  10. Potential clinical translation of juvenile rodent inactivity models to study the onset of childhood obesity

    OpenAIRE

    Roberts, Michael D.; Company, Joseph M.; Brown, Jacob D.; Toedebusch, Ryan G.; Padilla, Jaume; Jenkins, Nathan T.; Laughlin, M. Harold; Booth, Frank W.

    2012-01-01

    According to the latest data from the Center for Disease Control and Prevention 17%, or 12.5 million, of children and adolescents aged 2–19 years in the United States are obese. Physical inactivity is designated as one of the actual causes of US deaths and undoubtedly contributes to the obesity epidemic in children and adults. Examining the effects of inactivity on physiological homeostasis during youth is crucial given that 58% of children between the ages 6–11 yr old fail to obtain the reco...

  11. Trends in social inequality in physical inactivity among Danish adolescents 1991–2014

    DEFF Research Database (Denmark)

    Johnsen, N F; Toftager, Mette; Melkevik, Ole

    2017-01-01

    -sectional studies of nationally representative samples of 11–15-year old adolescents. The available data consisted of weekly time (hours) spent on vigorous physical activity and parental occupation from 30,974 participants. In summary, 8.0% of the adolescents reported to be physically inactive, i.e. spend zero...... hours of vigorous leisure time physical activity per week. The proportion of physically inactive adolescents was 5.4% in high social class and 7.8% and 10.8%, respectively, in middle and low social class. The absolute social inequality measured as prevalence difference between low and high social class...

  12. Process and system for reducing the inactive salt concentration in waste solutions of nuclear power plants

    International Nuclear Information System (INIS)

    Balint, T.; Drozda, T.; Mozes, G.; Kristof, M.; Hanel, E.; Tilky, P.

    1987-01-01

    The method is based on a suitable combination of most modern separation measures as there are precipitation, filtration, ultra-filtration, reverse osmosis, ion exchange, evaporation and crystallization; in this method almost the total quantity of the components with radioactivity, except tritium, can be effectively separated from inactive salts. One part of the inactive salt (alkali nitrate) can be treated as industrial waste and the other part (boric acid) can be recycled. The method of the invention as well as the equipment used for its execution can considerably reduce the high costs of waste solution treatment in nuclear power stations. (orig./RB) [de

  13. Aerobic exercise and cold pressor test induce hypoalgesia in active and inactive men and women

    DEFF Research Database (Denmark)

    Vaegter, Henrik Bjarke; Handberg, Gitte; Jørgensen, Maria N.

    2015-01-01

    ). Conditioned pain modulation (CPM) was assessed by cold pressor testing. Exercise-induced hypoalgesia (EIH) was assessed after 15 minutes bicycling at a heart rate corresponding to 75% VO2max. A control session of 15 minutes quiet rest was also included. Pressure pain thresholds (PPTs) were recorded....... It was hypothesized that active subjects had more efficient pain inhibition compared with inactive subjects. DESIGN: A randomized, crossover study with 2 days of data collection. METHODS: Fifty-six (28 females) subjects participated in this study. Subjects were subgrouped into active (n = 30) and inactive (n = 26...

  14. Determination of As, Cd, Hg and Pb in continuous use drugs and excipients by plasma-based techniques in compliance with the United States Pharmacopeia requirements

    Science.gov (United States)

    da Silva, Caroline Santos; Pinheiro, Fernanda Costa; do Amaral, Clarice Dias Britto; Nóbrega, Joaquim Araújo

    2017-12-01

    Some inorganic impurities are toxic to human health even when present at low concentrations and therefore must be carefully monitored in products as continuous use drugs. This work aimed the development of a simple microwave-assisted digestion procedure for different types of drugs and excipients and the analytical determination of elemental impurities according to the new regulations of the United States Pharmacopeia (USP) 232 and 233 using inductively coupled plasma optical emission spectrometry (ICP-OES) or inductively coupled plasma mass spectrometry (ICP-MS). Eight drugs samples and two excipients of different brands were microwave-assisted digested with inverse aqua regia. Addition and recovery experiments were performed according to J values, once permissible daily exposure value is specific for each element and estimated according to the maximum daily dose of drug indicated by the label. Samples were spiked with values of 1.5J in order to check accuracies for As, Cd, Hg, and Pb. Recoveries obtained by ICP-OES ranged from 75 to 148% and for ICP-MS ranged from 74 to 120%. The limits of detection for ICP-OES ranged from 0.4 to 17 mg kg- 1 and for ICP-MS from 7.4 to 41.6 μg kg- 1. Both analytical methods were adequate in terms of accuracies and sensitivities. Considering the maximum daily dose, all drugs samples and excipients contained As, Cd, Hg and Pb below the maximum limits stipulated by USP since all of them presented contents below respective limits of detection.

  15. Characterization of cellulose biomass for use as an excipient in pharmaceutical field; Caracterizacao de biomassa de celulose para utilizacao como excipiente na area farmaceutica

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Keth R.; Turella, Tais C.; Santos, Venina dos; Brandalise, Rosmary N. [Universidade de Caxias do Sul (UCS), Caxias do Sul, RS (Brazil). Centro de Ciencias Exatas e da Tecnologia; Angeli, Valeria W., E-mail: rnbranda@ucs.br [Universidade de Caxias do Sul (UCS), Caxias do Sul, RS (Brazil). Centro de Ciencias Biologicas e da Saude

    2015-07-01

    Every day the industry of paper and cellulose discards large amounts of waste. An alternative to reuse this kind of biomass is to transform part of it in cellulose nanocrystals and nanofibrils to be used as excipients in pharmaceutical field. Thus, cellulose fibrils were obtained in nanoscale using mill and fibrils' characterization study were performed by scanning electron microscopy, transmission electron microscopy, thermal analysis, differential scanning calorimetry, infrared Fourier transform and X-rays diffraction. Hence, the methodology used to obtain and characterize nanocellulose was effective and the fibers/fibrils lengths are in nanometer dimension with high potential to apply in the pharmaceutical field. (author)

  16. Prebiotics as functional food ingredients preventing diet-related diseases.

    Science.gov (United States)

    Florowska, A; Krygier, K; Florowski, T; Dłużewska, E

    2016-05-18

    This paper reviews the potential of prebiotic-containing foods in the prevention or postponement of certain diet-related diseases, such as cardiovascular diseases with hypercholesterolemia, osteoporosis, diabetes, gastrointestinal infections and gut inflammation. Also the data on prebiotics as food ingredients and their impact on food product quality are presented. Prebiotics are short chain carbohydrates that are resistant to the digestion process in the upper part of the digestive system, are not absorbed in any segment of the gastrointestinal system, and finally are selectively fermented by specific genera of colonic bacteria. The mechanisms of the beneficial impacts of prebiotics on human health are very difficult to specify directly, because their health-promoting functions are related to fermentation by intestinal microflora. The impact of prebiotics on diet-related diseases in many ways also depends on the products of their fermentation. Prebiotics as functional food ingredients also have an impact on the quality of food products, due to their textural and gelling properties. Prebiotics as food additives can be very valuable in the creation of functional food aimed at preventing or postponing many diet-related diseases. They additionally have beneficial technological properties which improve the quality of food products.

  17. Plant Cell Cultures as Source of Cosmetic Active Ingredients

    Directory of Open Access Journals (Sweden)

    Ani Barbulova

    2014-04-01

    Full Text Available The last decades witnessed a great demand of natural remedies. As a result, medicinal plants have been increasingly cultivated on a commercial scale, but the yield, the productive quality and the safety have not always been satisfactory. Plant cell cultures provide useful alternatives for the production of active ingredients for biomedical and cosmetic uses, since they represent standardized, contaminant-free and biosustainable systems, which allow the production of desired compounds on an industrial scale. Moreover, thanks to their totipotency, plant cells grown as liquid suspension cultures can be used as “biofactories” for the production of commercially interesting secondary metabolites, which are in many cases synthesized in low amounts in plant tissues and differentially distributed in the plant organs, such as roots, leaves, flowers or fruits. Although it is very widespread in the pharmaceutical industry, plant cell culture technology is not yet very common in the cosmetic field. The aim of the present review is to focus on the successful research accomplishments in the development of plant cell cultures for the production of active ingredients for cosmetic applications.

  18. In chemico skin sensitization risk assessment of botanical ingredients.

    Science.gov (United States)

    Avonto, Cristina; Chittiboyina, Amar G; Sadrieh, Nakissa; Vukmanovic, Stanislav; Khan, Ikhlas A

    2018-03-24

    Skin sensitization risk assessment of botanical ingredients is necessary for consumers' protection and occupational hazard identification. There are currently very few available alternative methods that can assist in the evaluation of complex mixtures. Chemical methods can provide essential information in a timely manner and thus help to reduce the need for in vivo testing, and they can complement and facilitate targeted in vitro assays. In the present work, the applicability of the high-throughput screening with dansyl cysteamine (DCYA) method for the systematic evaluation of skin sensitization of complex botanicals was explored. Botanical ingredients of four unrelated plant species were obtained and tested with the high-throughput fluorescence method at three concentrations. To illustrate the minimal matrix effects of the tested extracts on the developed method, the least DCYA-reactive extract (Rosa canina) was spiked with known sensitizers at different concentrations. The data obtained from the four plant extracts and the spiking experiments with known sensitizers, suggest that the high-throughput screening-DCYA method can be successfully applied for estimating the skin sensitization potential of complex botanical matrices. This is the first report of an attempt to develop a versatile in chemico method for the rapid detection of reactive skin sensitizers in complex botanical extracts, which could complement the battery of existing validated, non-animal methods. Copyright © 2018 John Wiley & Sons, Ltd.

  19. Ingredient supplementation effects on viability of probiotic bacteria in yogurt.

    Science.gov (United States)

    Dave, R I; Shah, N P

    1998-11-01

    The present investigation studied the effects of cysteine, whey powder, whey protein concentrate, acid casein hydrolysates, or tryptone on the viability of Streptococcus thermophilus, Lactobacillus acidophilus, and bifidobacteria. Changes in pH, titratable acidity, redox potential, and viability of bacteria were monitored during 24 h of fermentation and refrigerated storage (4 degrees C) of yogurt for 35 d. The incubation time that was needed to reach pH 4.5 was considerably affected by the added ingredients. Also, the drop in pH or the increase in acidity and redox potential was dependent on the added ingredients. The addition of cysteine, whey protein concentrate, acid casein hydrolysates, or tryptone improved the viability of bifidobacteria to a variable extent, but whey powder failed to improve their viability. The morphology of S. thermophilus, as shown by electron microscopy, was affected by cysteine at 500 mg/L, possibly as a result of reduced redox potential. Sodium dodecyl sulfate-PAGE and amino acid analyses suggested that the nitrogen source in the form of peptides and amino acids improved the viability of bifidobacteria in yogurt made with a commercial ABT (Lactobacillus acidophilus, bifidobacteria, and Streptococcus thermophilus) starter culture, which showed a dramatic decline in the counts of this organism in previous studies.

  20. Technological Challenges for Spray Chilling Encapsulation of Functional Food Ingredients

    Directory of Open Access Journals (Sweden)

    Carmen Sílvia Favaro-Trindade

    2013-01-01

    Full Text Available Spray chilling technology (also known as spray cooling and spray congealing technology has been widely studied and used in the pharmaceutical field. In the food industry, this technique is gaining interest and can become useful because functional food formulations can be developed. Spray chilling is a fat-based system, which involves the addition of the component of interest to a molten lipid carrier, and the resulting mixture is fed through an atomiser nozzle. When the nebulised material is put into contact with the environment, which is cooled below the melting point of the matrix material, the vehicle solidifies (due to heat exchange between the molten material and cold air, and solid lipid microparticles are formed at the same time. This technology is fat based, and lipid carriers, such as wax and oil (e.g. palm oil, beeswax, cocoa butter, and kernel oil can be used. This encapsulation technique can potentially change the functionality, reduce the hygroscopicity, mask taste or odour, change solubility, and provide physical protection in addition to allowing the controlled release of these ingredients. This low-cost technology is relatively simple to apply and scale up, and it does not require the use of organic solvents and the application of high temperatures in the process. Therefore, spray chilling encapsulation may facilitate the development and production of functional and enriched foods as it may solve some technological problems associated with the use of certain ingredients, such as those that have high reactivity and low stability.

  1. Macroalgae-Derived Ingredients for Cosmetic Industry—An Update

    Directory of Open Access Journals (Sweden)

    Filipa B. Pimentel

    2017-12-01

    Full Text Available Aging is a natural and progressive declining physiological process that is influenced by multifactorial aspects and affects individuals’ health in very different ways. The skin is one of the major organs in which aging is more evident, as it progressively loses some of its natural functions. With the new societal paradigms regarding youth and beauty have emerged new concerns about appearance, encouraging millions of consumers to use cosmetic/personal care products as part of their daily routine. Hence, cosmetics have become a global and highly competitive market in a constant state of evolution. This industry is highly committed to finding natural sources of functional/bioactive-rich compounds, preferably from sustainable and cheap raw materials, to deliver innovative products and solutions that meet consumers’ expectations. Macroalgae are an excellent example of a natural resource that can fit these requirements. The incorporation of macroalgae-derived ingredients in cosmetics has been growing, as more and more scientific evidence reports their skin health-promoting effects. This review provides an overview on the possible applications of macroalgae as active ingredients for the cosmetic field, highlighting the main compounds responsible for their bioactivity on skin.

  2. UV filters, ingredients with a recognized anti-inflammatory effect.

    Directory of Open Access Journals (Sweden)

    Céline Couteau

    Full Text Available BACKGROUND: To explain observed differences during SPF determination using either an in vivo or in vitro method, we hypothesized on the presence of ingredients having anti-inflammatory properties. METHODOLOGY/PRINCIPAL FINDINGS: To research our hypothesis, we studied the 21 UV filters both available on the market and authorized by European regulations and subjected these filters to the phorbol-myristate-acetate test using mice. We then catalogued the 13 filters demonstrating a significant anti-inflammatory effect with edema inhibition percentages of more than 70%. The filters are: diethylhexyl butamido triazone (92%, benzophenone-5 and titanium dioxide (90%, benzophenone-3 (83%, octocrylène and isoamyl p-methoxycinnamate (82%, PEG-25 PABA and homosalate (80%, octyl triazone and phenylbenzimidazole sulfonic acid (78%, octyl dimethyl PABA (75%, bis-ethylhexyloxyphenol methoxyphenyl triazine and diethylamino hydroxybenzoyl hexylbenzoate (70%. These filters were tested at various concentrations, including their maximum authorized dose. We detected a dose-response relationship. CONCLUSIONS/SIGNIFICANCE: The anti-inflammatory effect of a sunscreen ingredient may affect the in vivo SPF value.

  3. Photocatalytic degradation of sunscreen active ingredients mediated by nanostructured materials

    Science.gov (United States)

    Soto-Vazquez, Loraine

    Water scarcity and pollution are environmental issues with terrible consequences. In recent years several pharmaceutical and personal care products, such as sunscreen active ingredients, have been detected in different water matrices. Its recalcitrant behavior in the environment has caused controversies and generated countless questions about its safety. During this research, we employed an advanced oxidation process (photocatalysis) to degrade sunscreen active ingredients. For this study, we used a 3x3 system, evaluating three photocatalysts and three different contaminants. From the three catalysts employed, two of them were synthesized. ZnO nanoparticles were obtained using zinc acetate dihydrated as the precursor, and TiO2 nanowires were synthesized from titanium tetrachloride precursor. The third catalyst employed (namely, P25) was obtained commercially. The synthesized photocatalysts were characterized in terms of the morphology, elemental composition, crystalline structure, elemental oxidation states, vibrational modes and surface area, using SEM-EDS, XRD, XPS, Raman spectroscopy and BET measurements, respectively. The photocatalysts were employed during the study of the degradation of p-aminobenzoic acid, phenylbenzimidazole sulfonic acid, and benzophenone-4. In all the cases, at least 50% degradation was achieved. P25 showed degradation efficiencies above 90%, and from the nine systems, 7 of them degraded at least 86%.

  4. Hydroxytyrosol: Health Benefits and Use as Functional Ingredient in Meat

    Directory of Open Access Journals (Sweden)

    Lorena Martínez

    2018-01-01

    Full Text Available Hydroxytyrosol (HXT is a phenolic compound drawn from the olive tree and its leaves as a by-product obtained from the manufacturing of olive oil. It is considered the most powerful antioxidant compound after gallic acid and one of the most powerful antioxidant compounds between phenolic compounds from olive tree followed by oleuropein, caffeic and tyrosol. Due to its molecular structure, its regular consumption has several beneficial effects such as antioxidant, anti-inflammatory, anticancer, and as a protector of skin and eyes, etc. For these reasons, the use of HXT extract is a good strategy for use in meat products to replace synthetics additives. However, this extract has a strong odour and flavour, so it is necessary to previously treat this compound in order to not alter the organoleptic quality of the meat product when is added as ingredient. The present review exposes the health benefits provided by HXT consumption and the latest research about its use on meat. In addition, new trends about the application of HXT in the list of ingredients of healthier meat products will be discussed.

  5. EU legislations affecting safety data availability of cosmetic ingredients.

    Science.gov (United States)

    Pauwels, Marleen; Rogiers, Vera

    2007-12-01

    With the introduction of the 6th and 7th Amendments (OJ L151, 32-37, 23 June 1993; OJ L066, 26-35, 11 March 2003) to the Cosmetic Products Directive (OJ L262, 169-200, 27 September 1976), imposing a testing and marketing ban on cosmetic products tested on animals, the retrieval of toxicological data on individual ingredients became of greater need. Since the majority of cosmetic ingredients are used for many other purposes than their cosmetic function, they fall under the scope of more than one EU Directive. An overview is given of EU legislation that could potentially affect the availability and interpretation of cosmetic safety data. It will become clear that, although cosmetics are regulated by a specific so-called "vertical" legislation, "horizontal" influences from other products' legislations play a role since they determine the type and amount of data that theoretically could be found on the specific substances they regulate. This knowledge is necessary while performing extended searches in databases and becomes indispensable when initiating negotiations with manufacturers or suppliers for obtaining the safety data required.

  6. Who Are the "Lazy" Ants? The Function of Inactivity in Social Insects and a Possible Role of Constraint: Inactive Ants Are Corpulent and May Be Young and/or Selfish.

    Science.gov (United States)

    Charbonneau, Daniel; Poff, Corey; Nguyen, Hoan; Shin, Min C; Kierstead, Karen; Dornhaus, Anna

    2017-09-01

    Social insect colonies are commonly thought of as highly organized and efficient complex systems, yet high levels of worker inactivity are common. Although consistently inactive workers have been documented across many species, very little is known about the potential function or costs associated with this behavior. Here we ask what distinguishes these "lazy" individuals from their nestmates. We obtained a large set of behavioral and morphological data about individuals, and tested for consistency with the following evolutionary hypotheses: that inactivity results from constraint caused by worker (a) immaturity or (b) senescence; that (c) inactive workers are reproducing; that inactive workers perform a cryptic task such as (d) acting as communication hubs or (e) food stores; and that (f) inactive workers represent the "slow-paced" end of inter-worker variation in "pace-of-life." We show that inactive workers walk more slowly, have small spatial fidelity zones near the nest center, are more corpulent, are isolated in colony interaction networks, have the smallest behavioral repertoires, and are more likely to have oocytes than other workers. These results are consistent with the hypotheses that inactive workers are immature and/or storing food for the colony; they suggest that workers are not inactive as a consequence of senescence, and that they are not acting as communication hubs. The hypotheses listed above are not mutually exclusive, and likely form a "syndrome" of behaviors common to inactive social insect workers. Their simultaneous contribution to inactivity may explain the difficulty in finding a simple answer to this deceptively simple question. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology 2017. This work is written by US Government employees and is in the public domain in the US.

  7. Ingredient classification according to the digestible amino acid profile: an exploratory analysis

    Directory of Open Access Journals (Sweden)

    DE Faria Filho

    2005-09-01

    Full Text Available This study aimed: 1 to classify ingredients according to the digestible amino acid (AA profile; 2 to determine ingredients with AA profile closer to the ideal for broiler chickens; and 3 to compare digestible AA profiles from simulated diets with the ideal protein profile. The digestible AA levels of 30 ingredients were compiled from the literature and presented as percentages of lysine according to the ideal protein concept. Cluster and principal component analyses (exploratory analyses were used to compose and describe groups of ingredients according to AA profiles. Four ingredient groups were identified by cluster analysis, and the classification of the ingredients within each of these groups was obtained from a principal component analysis, showing 11 classes of ingredients with similar digestible AA profiles. The ingredients with AA profiles closer to the ideal protein were meat and bone meal 45, fish meal 60 and wheat germ meal, all of them constituting Class 1; the ingredients from the other classes gradually diverged from the ideal protein. Soybean meal, which is the main protein source for poultry, showed good AA balance since it was included in Class 3. On the contrary, corn, which is the main energy source in poultry diets, was classified in Class 8. Dietary AA profiles were improved when corn and/or soybean meal were partially or totally replaced in the simulations by ingredients with better AA balance.

  8. Radiolabelling of potential colonic delivery systems by neutron activation. An evaluation based on physiochemical properties of excipients and formulations

    Energy Technology Data Exchange (ETDEWEB)

    Ahrabi, Sayeh

    1999-07-01

    The effects of neutron irradiation on the physicochemical properties of some potential release-controlling excipients for oral delivery to colon (based on microbially degradable polysaccharide or a combination of pH- and time-dependent mechanisms) were initially investigated. The aim was to choose the most irradiation-resistant ones for the development of a colonic delivery system to be radiolabelled by the neutron activation procedure. However, no correlation between the extent of irradiation-induced changes of the release-controlling polymers and the in vitro properties of the final formulation was observed. Incorporation of samarium oxide (Sm{sub 2}O{sub 3}) resulted in retardation of the drug release through the diffusion layer. The influence of neutron activation factors on the properties of some suppository combinations was also studied. The effect of the admixture of Sm{sub 2}O{sub 3} on the dissolution and disintegration of the suppositories was more profound than the effect of neutron irradiation. In hydrophilic suppositories, the effect of Sm{sub 2}O{sub 3} was dependent on the type, amount and the physicochemical characteristics of the incorporated drug. In lipophilic suppositories, the release-controlling effect of Sm{sub 2}O{sub 3} was hypothesised to be due to its insoluble micronised particles blocking the drug diffusion layer. The neutron activation procedure could be utilised for radiolabelling potential oral and rectal colonic drug delivery systems. However, to avoid alteration in the crucial in vitro characteristics of the formulations, the amount, the particle size and the aggregated particle characteristics of the lanthanide salt (e.g. Sm{sub 2}O{sub 3} or samarium stearate) together with the neutron irradiation dose should be controlled precisely for each dosage system. For the systems investigated in this work the release-controlling mechanism of the dosage form seems to be a key parameter to predict the extent of the influence of neutron

  9. 37 CFR 11.19 - Disciplinary jurisdiction; Jurisdiction to transfer to disability inactive status.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Disciplinary jurisdiction; Jurisdiction to transfer to disability inactive status. 11.19 Section 11.19 Patents, Trademarks, and Copyrights... UNITED STATES PATENT AND TRADEMARK OFFICE Investigations and Disciplinary Proceedings; Jurisdiction...

  10. The cost of physical inactivity to a nation: the role of sports medicine ...

    African Journals Online (AJOL)

    disease, obesity, type 2 diabetes, etc.) is not well documented in. Africa, their meteoric rise is well publicised in the ... coded for by our genome. Furthermore, by delving into early man's patterns of nutrition, it appears that cycling periods of food availability programmed the body to respond to physical inactivity in a particular.

  11. 38 CFR 3.375 - Determination of inactivity (complete arrest) in tuberculosis.

    Science.gov (United States)

    2010-07-01

    ... inactivity (complete arrest) in tuberculosis. 3.375 Section 3.375 Pensions, Bonuses, and Veterans' Relief...) in tuberculosis. (a) Pulmonary tuberculosis. A veteran shown to have had pulmonary tuberculosis will...) Nonpulmonary disease. Determination of complete arrest of nonpulmonary tuberculosis requires absence of...

  12. Recreational physical inactivity and mortality in women with invasive epithelial ovarian cancer

    DEFF Research Database (Denmark)

    Cannioto, Rikki A.; LaMonte, Michael J.; Kelemen, Linda E

    2016-01-01

    Background: Little is known about modifiable behaviours that may be associated with epithelial ovarian cancer (EOC) survival. We conducted a pooled analysis of 12 studies from the Ovarian Cancer Association Consortium to investigate the association between pre-diagnostic physical inactivity and m...

  13. The cost of policy inaction : the case of not meeting the 2010 biodiversity target

    NARCIS (Netherlands)

    Braat, L.C.; Brink, ten P.; Klok, T.C.

    2008-01-01

    The COPI methodology and valuation database. Change in land use, climate, pollution, water use; change in biodiversity; change in ecosystem functions; change in ecosystem services contributes to change in economic value. The Cost of Policy Inaction (COPI) is described in monitory terms. The outcome

  14. Comparison of Static Balance in Active and Inactive Adult and Elderly Men

    Directory of Open Access Journals (Sweden)

    Morteza Hajinia

    2013-04-01

    Full Text Available Objectives: The purpose of this study was to compare the static balance in active and inactive adult and elderly men. Methods & Materials: 55 active adult and elderly men and 49 inactive adult and elderly men participated in this cross sectional- comparative study. Static balance was measured by stork stand test with opened and closed eye. Gait velocity (time in active subjects was measured used Rockport walk test. Independent T-test was used to compare balance with opened and closed eye between two groups. To examine correlation between static balance with age and gait velocity, Pearson correlation coefficient was used. Statistical analysis was performed using SPSS-16 software package. Results: The results showed that balance with opened and closed eye were significantly higher in active subjects and inactive active subjects. In active subjects, there was no significant correlation between gait velocity and balance with opened and closed eye. There was significant negative correlation between static balance and age, as with increase age static balance decrease significantly. Conclusion: The results indicated that active (walking and Morning sports-based adult and elderly men have better static balance than inactive adult and elderly men, as a result of using walking training program. It is possible that walking with the overload on information transfer through Improve somatosensory systems, May improve the balance.

  15. The inactive X chromosome in the human female is enriched in 5 ...

    Indian Academy of Sciences (India)

    Unknown

    J. Genet. 82, 13–16]. Introduction. The hypothesis that methylation of cytosine residues in. DNA is a key step in the maintenance of the inactive state of the mammalian X chromosome (Holliday and. Pugh 1975; Riggs 1975) has found support from several types of experiment (Liskay and Evans 1980; Mohandas et al. 1981).

  16. 17 CFR 210.3-11 - Financial statements of an inactive registrant.

    Science.gov (United States)

    2010-04-01

    ... inactive entity as defined below, the financial statements required by this regulation for purposes of... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Financial statements of an... COMMISSION FORM AND CONTENT OF AND REQUIREMENTS FOR FINANCIAL STATEMENTS, SECURITIES ACT OF 1933, SECURITIES...

  17. 2014 consensus statement from the first Economics of Physical Inactivity Consensus (EPIC) conference (Vancouver).

    Science.gov (United States)

    Davis, Jennifer C; Verhagen, Evert; Bryan, Stirling; Liu-Ambrose, Teresa; Borland, Jeff; Buchner, David; Hendriks, Marike R C; Weiler, Richard; Morrow, James R; van Mechelen, Willem; Blair, Steven N; Pratt, Mike; Windt, Johann; al-Tunaiji, Hashel; Macri, Erin; Khan, Karim M

    2014-06-01

    This article describes major topics discussed from the 'Economics of Physical Inactivity Consensus Workshop' (EPIC), held in Vancouver, Canada, in April 2011. Specifically, we (1) detail existing evidence on effective physical inactivity prevention strategies; (2) introduce economic evaluation and its role in health policy decisions; (3) discuss key challenges in establishing and building health economic evaluation evidence (including accurate and reliable costs and clinical outcome measurement) and (4) provide insight into interpretation of economic evaluations in this critically important field. We found that most methodological challenges are related to (1) accurately and objectively valuing outcomes; (2) determining meaningful clinically important differences in objective measures of physical inactivity; (3) estimating investment and disinvestment costs and (4) addressing barriers to implementation. We propose that guidelines specific for economic evaluations of physical inactivity intervention studies are developed to ensure that related costs and effects are robustly, consistently and accurately measured. This will also facilitate comparisons among future economic evidence. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  18. Sexual inactivity and occurrence of STIs in relation to weight status in women

    DEFF Research Database (Denmark)

    Gunge, Vibeke B; Juul, Kirsten E; van den Brule, Adriaan Jc

    2018-01-01

    The aim of this study was to examine sexual inactivity and occurrence of selected sexually transmitted infections in relation to body mass index. We used data from two large Danish population-based cross-sectional studies conducted in 1991-1995 (HPV study: 6869 women, aged 22-32 years) and in 200...

  19. Cosmopolitan Utilitarianism and the Problem of Local Inaction in a Globalized World

    Directory of Open Access Journals (Sweden)

    Fausto Corvino

    2015-10-01

    Full Text Available This article explores the problem of the public acceptability of political inaction as an extreme consequence of cosmopolitan utilitarianism. The case of political inaction as the utility-maximizing public policy option emerges more clearly in the globalized world, because of a misalignment between the electoral body and the persons that the government ought to consider while evaluating the consequences of a given policy. In this context, a situation can easily occur in which the only way to maximize utility in a global context is by renouncing action at the national or local level. However, the problem of inaction should not be interpreted simply as a by-product of globalization. Its origins can be traced to the basic structure of utilitarianism as a normative consequentialist theory. This drawback can even present itself at the local level in a less visible form. One example is that in which the performance of a supererogatory act in the exercise of public office leads to a reduction in overall utility. The aim of the article is to demonstrate that cosmopolitan utilitarianism can bind the decision maker to a series of inactions at the global and local levels that contradict his own mandate, generating a dangerous moral confusion in the implementation of public policies. This can seriously threaten the universal applicability of cosmopolitan utilitarianism as a normative political theory, especially in the age of globalization.

  20. The association of physical inactivity with Type 2 diabetes among different ethnic groups

    NARCIS (Netherlands)

    Admiraal, W. M.; van Valkengoed, I. G. M.; L de Munter, J. S.; Stronks, K.; Hoekstra, J. B. L.; Holleman, F.

    2011-01-01

    Diabet. Med. 28, 668-672 (2011) ABSTRACT: Aims  To study differences in the association between physical inactivity and Type 2 diabetes among subjects from different ethnic groups. Methods  We analysed data on 508 Caucasian, 596 African-Surinamese and 339 Hindustani-Surinamese participants, aged

  1. Effect of physical inactivity on major non-communicable diseases worldwide

    DEFF Research Database (Denmark)

    Lee, I-Min; Shiroma, Eric J; Lobelo, Felipe

    2012-01-01

    Strong evidence shows that physical inactivity increases the risk of many adverse health conditions, including major non-communicable diseases such as coronary heart disease, type 2 diabetes, and breast and colon cancers, and shortens life expectancy. Because much of the world's population is ina...

  2. Wheelchair-specific fitness of inactive people with long-term spinal cord injury

    NARCIS (Netherlands)

    van der Scheer, Jan W.; de Groot, Sonja; Tepper, Marga; Gobets, David; Veeger, DirkJan H. E. J.; van der Woude, Lucas H. V.

    Objectives: To describe wheelchair-specific anaerobic work capacity, isometric strength and peak aerobic work capacity of physically inactive people with long-term spinal cord injury using outcomes of tests that are feasible for use in rehabilitation centres, and to determine associations among

  3. Validity and reliability of a physical activity/inactivity questionnaire in ...

    African Journals Online (AJOL)

    Objective. We sought to determine the validity and reliability of a self-report physical activity questionnaire (PAQ) measuring physical activity/inactivity in South African schoolgirls of different ethnic origins. Methods. Construct validity of the PAQ was tested against physical activity energy expenditure estimated from an ...

  4. Living near the port area is associated with physical inactivity and sedentary behavior

    Directory of Open Access Journals (Sweden)

    Evandro Fornias Sperandio

    Full Text Available ABSTRACT CONTEXT AND OBJECTIVE: The impact of the port of Santos, Brazil, on the population’s health is unknown. We aimed to evaluate the association between living near the port area and physical inactivity and sedentary behavior. DESIGN AND SETTING: Cross-sectional study developed at a university laboratory and a diagnostic clinic. METHODS: 553 healthy adults were selected and their level of physical activity in daily life was assessed using accelerometers. Multiple linear and logistic regressions were performed using physical inactivity and sedentary behavior as the outcomes and living near the port area as the main risk factor, with adjustments for the main confounders. RESULTS: Among all the participants, 15% were resident near the port area. They took 699 steps/day and presented, weekly, 2.4% more sedentary physical activity, 2.0% less time in standing position and 0.9% more time lying down than residents of other regions. Additionally, living near the port area increased the risk of physical inactivity by 2.50 times and the risk of higher amounts of sedentary behavior (≥ 10 hours/day by 1.32 times. CONCLUSION: Living near the port of Santos is associated with physical inactivity and higher sedentary behavior among adults, regardless of confounders. The reasons for this association should be investigated in longitudinal studies.

  5. Manipulation and mobilisation for neck pain contrasted against an inactive control or another active treatment

    NARCIS (Netherlands)

    Gross, Anita; Langevin, Pierre; Burnie, Stephen J.; Bédard-Brochu, Marie-Sophie; Empey, Brian; Dugas, Estelle; Faber-Dobrescu, Michael; Andres, Cristy; Graham, Nadine; Goldsmith, Charles H.; Brønfort, Gert; Hoving, Jan L.; LeBlanc, Francis

    2015-01-01

    Manipulation and mobilisation are commonly used to treat neck pain. This is an update of a Cochrane review first published in 2003, and previously updated in 2010. To assess the effects of manipulation or mobilisation alone compared wiith those of an inactive control or another active treatment on

  6. Artist-Teachers' In-Action Mental Models While Teaching Visual Arts

    Science.gov (United States)

    Russo-Zimet, Gila

    2017-01-01

    Studies have examined the assumption that teachers have previous perceptions, beliefs and knowledge about learning (Cochran-Smith & Villegas, 2015). This study presented the In-Action Mental Model of twenty leading artist-teachers while teaching Visual Arts in three Israeli art institutions of higher Education. Data was collected in two…

  7. Contaminant transport, revegetation, and trace element studies at inactive uranium mill tailings piles

    International Nuclear Information System (INIS)

    Dreesen, D.R.; Marple, M.L.; Kelley, N.E.

    1978-01-01

    The stabilization of inactive uranium mill tailings piles is presently under study. These studies have included investigations of stabilizing tailings by attempting to establish native vegetation without applying irrigation. Examination of processes which transport tailings or associated contaminants into the environment has been undertaken to better understand the containment provided by various stabilization methods. The uptake of toxic trace elements and radionuclides by vegetation has been examined as a mechanism of contaminant transport. The source terms of 222 Rn from inactive piles have been determined as well as the attenuation of radon flux provided by shallow soil covers. The possibility of shallow ground water contamination around an inactive pile has been examined to determine the significance of ground water transport as a mode of contaminant migration. The rationale in support of trace element studies related to uranium milling activities is presented including the enrichment, migration, and toxicities of trace elements often associated with uranium deposits. Some concepts for the stabilization of inactive piles are presented to extrapolate from research findings to practical applications. 25 references, 8 tables

  8. Supporting healthcare professionals to encourage patients to decrease cardiovascular risk attributable to physical inactivity

    NARCIS (Netherlands)

    Drs. Barbara Sassen

    2011-01-01

    The consequences of cardiovascular diseases are substantial and include increasing numbers of morbidity and mortality. With a population getting more and more inactive and having a sedentary lifestyle, the risk for cardiovascular disease and type 2 diabetes rises. This dissertation reports on people

  9. Physical inactivity and pain in older men and women with hip fracture history

    NARCIS (Netherlands)

    Salpakoski, Anu; Portegijs, Erja; Kallinen, Mauri; Sihvonen, Sanna; Kiviranta, Ilkka; Alen, Markku; Rantanen, Taina; Sipilä, Sarianna

    2011-01-01

    Hip fracture patients often suffer from pain for several months after surgery. This may lead to physical inactivity and subsequent mobility limitation and disability. The purpose of this study was to investigate the association between severe musculoskeletal pain and the level of physical activity

  10. Emotional Outlook on Life Predicts Increases in Physical Activity among Initially Inactive Men

    Science.gov (United States)

    Baruth, Meghan; Lee, Duck-Chul; Sui, Xuemei; Church, Timothy S.; Marcus, Bess H.; Wilcox, Sara; Blair, Steven N.

    2011-01-01

    This study examined the relationship between emotional outlook on life and change in physical activity among inactive adults in the Aerobics Center Longitudinal Study. A total of 2,132 sedentary adults completed a baseline medical examination and returned for a follow-up examination at least 6 months later. Participants self-reported physical…

  11. Physical inactivity and obesity: Using a novel environmental quality measure to control confounding

    Science.gov (United States)

    Physical inactivity is well-established as a contributor to obesity prevalence in the US. Many aspects of the ambient environment (e.g., air pollution, food deserts, neighborhood socioeconomics) have also been associated with obesity. Yet, controlling for the overall ambient envi...

  12. Past-Year Sexual Inactivity among Older Married Persons and Their Partners

    Science.gov (United States)

    Karraker, Amelia; DeLamater, John

    2013-01-01

    Family scholars have focused on the onset of sexual activity early in the life course, but little is known about the cessation of sexual activity in relationships in later life. We use event-history analysis techniques and logistic regression to identify the correlates of sexual inactivity among older married men and women. We analyze data for…

  13. The inactive X chromosome in the human female is enriched in 5 ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Genetics; Volume 82; Issue 1-2. The inactive X chromosome in the human female is enriched in 5-methylcytosine to an unusual degree and appears to contain more of this modified nucleotide than the remainder of the genome. Deepti D. Deobagkar H. Sharat Chandra. Volume 82 Issue 1-2 ...

  14. Epidemiology of physical inactivity, sedentary behaviors, and unhealthy eating habits among brazilian adolescents: a systematic review

    Directory of Open Access Journals (Sweden)

    Valter Cordeiro Barbosa Filho

    2014-01-01

    Full Text Available This systematic review analyzed the prevalence of physical inactivity, sedentary behaviors and unhealthy eating habits among Brazilian adolescents. Searches were conducted in five databases (Lilacs, SciELO, Medline, Web of Science, and Google Scholar and in the references cited in the articles retrieved. The literature search yielded 5,872 potentially relevant titles and a total of 69 studies met all the inclusion criteria. The risk behavior most often evaluated was physical inactivity (48/69; 69.6%, and its prevalence rate ranged from 2.3% to 93.5%. Twenty-eight studies estimated the prevalence of physical inactivity at over 50%. Most studies observed the prevalence of greater physical inactivity among girls. The prevalence of sedentary behaviors (lengthy screen time or TV use was also frequently over 50%. Several variables were used to identify unhealthy eating habits, and some criteria/studies have indicated unhealthy eating habit estimates at close to 100% among adolescents. In conclusion, the estimates of these risk behaviors among Brazilians adolescents were very close to or even greater than those found in developed countries in several studies analyzed in this review.

  15. Social Cognitive Correlates of Physical Activity in Inactive Adults with Multiple Sclerosis

    Science.gov (United States)

    Dlugonski, Deirdre; Wojcicki, Thomas R.; McAuley, Edward; Motl, Robert W.

    2011-01-01

    Persons with multiple sclerosis (MS) are often physically inactive. This observation has prompted the search for modifiable constructs derived from established theories that act as correlates of physical activity. This study investigated self efficacy, outcome expectations, impediments, and goal setting as correlates of physical activity in…

  16. Wheelchair-Specific Fitness of Inactive People with Long-Term Spinal Cord Injury

    NARCIS (Netherlands)

    van der Scheer, J.W.; de Groot, S.; Tepper, M.; Gobets, D.; Veeger, H.E.J.; van der Woude, L.H.V.

    2015-01-01

    Objectives: To describe wheelchair-specific anaerobic work capacity, isometric strength and peak aerobic work capacity of physically inactive people with long-term spinal cord injury using outcomes of tests that are feasible for use in rehabilitation centres, and to determine associations among

  17. Wheelchair-specific fitness of inactive people with long-term spinal cord injury

    NARCIS (Netherlands)

    Van der Scheer, J.W.; De Groot, S.; Tepper, M.; Gobets, D.; Veeger, H.E.J.; Van der Woude, L.H.V.; Woldring, F.; Valent, L.; Slootman, H.; Faber, W.

    2015-01-01

    Objectives: To describe wheelchair-specific anaerobic work capacity, isometric strength and peak aerobic work capacity of physically inactive people with long-term spinal cord injury using outcomes of tests that are feasible for use in rehabilitation centres, and to determine associations among

  18. [Physical inactivity and anthropometric measures in school children from Paranavaí, Paraná, Brazil].

    Science.gov (United States)

    Guilherme, Flávio Ricardo; Molena-Fernandes, Carlos Alexandre; Guilherme, Vânia Renata; Fávero, Maria Teresa Martins; dos Reis, Eliane Josefa Barbosa; Rinaldi, Wilson

    2015-01-01

    To investigate the association between physical inactivity and anthropometric measurements in school children from Paranavaí-Paraná, Brazil. Cross-sectional survey, conducted in July and August 2013. Sample of 566 students (287 boys and 278 girls) from 6th to 9th grade aged 10 to 14 years of public and private schools from Paranavaí-PR, Southern Brazil. The variables analyzed were: time of weekly physical activity by a questionnaire (physical inactivity <300 minutes/week), body mass index (BMI) and waist circumference (WC). In the statistical analysis the U Mann-Whitney and Student t test were used for comparison between genders. To identify factors associated with insufficient levels of physical activity, univariate and multivariate logistic regression analysis was applied and expressed in Odds ratio (OR) and 95% confidence interval (CI). There was an association between physical inactivity and anthropometric measurements for BMI (p<0.001) and WC (p<0.001), with a prevalence rate of 56.1% and 52.7% of inactive adolescents, respectively. In the multivariate analysis, there was significant association of physical inactivity and overweight (OR 1.8, 95%CI: 1.1-3.0) and with increased waist circumference (OR 2.8, 95%CI: 1.4-3.8). Inadequate levels of physical activity is a determining factor for overweight and abdominal adiposity. Accordingly, preventive measures should be taken, especially in schools, emphasizing the importance of exercise in the control of body composition and reduction of weight. Copyright © 2014 Associação de Pediatria de São Paulo. Publicado por Elsevier Editora Ltda. All rights reserved.

  19. Self-Esteem in People with Physical Disabilities: Differences between Active and Inactive Individuals

    Directory of Open Access Journals (Sweden)

    Nemček Dagmar

    2017-05-01

    Full Text Available The aim of the study was to determine the status of SE in people with physical disabilities (PwPD and compare SE scores between active and inactive individuals. The sample of PwPD (n = 186 was divided into two groups of those who are regularly participating in sport (active; n = 88 and those who are not participating in any sport in their leisure (inactive; n = 98. The Rosenberg Self-Esteem Scale (RSES was used as a primary research method. 10-item scale measures global self-worth by measuring positive and negative feelings about the self. Higher scores (from 10 to 40 points indicate higher SE. The Pearson chi-square test was used to determine the differences of 10 RSES items and total scores between active and inactive PwPD. We found that the mean score of RSES in PwPD was 28.83 points; active PwPD observed total score of RSES 30.01 points and group of inactive PwPD showed the lowest SE by achieving 27.76 points. Mean scores comparison of each RSES item between active and inactive PwPD revealed higher SE in the group of active PwPD. Significantly higher SE was presented by 4 from 10 RSES items and by total score in the group of active PwPD. The results of our study confirmed that actively living PwPD have significantly higher SE comparing those PwPD who are living sedentary life style.

  20. Trends in social inequality in physical inactivity among Danish adolescents 1991–2014

    Directory of Open Access Journals (Sweden)

    N.F. Johnsen

    2017-12-01

    Full Text Available The aim of this study was to investigate social inequality in physical inactivity among adolescents from 1991 to 2014 and to describe any changes in inequality during this period. The analyses were based on data from the Danish part of the HBSC study, which consists of seven comparable cross-sectional studies of nationally representative samples of 11–15-year old adolescents. The available data consisted of weekly time (hours spent on vigorous physical activity and parental occupation from 30,974 participants. In summary, 8.0% of the adolescents reported to be physically inactive, i.e. spend zero hours of vigorous leisure time physical activity per week. The proportion of physically inactive adolescents was 5.4% in high social class and 7.8% and 10.8%, respectively, in middle and low social class. The absolute social inequality measured as prevalence difference between low and high social class did not change systematically across the observation period from 1991 to 2014. Compared to high social class, OR (95% CI for physical inactivity was 1.48 (1.32–1.65 in middle social class and 2.18 (1.92–2.47 in lower social class. This relative social inequality was similar in the seven data collection waves (p=0.971. Although the gap in physical inactivity between social classes does not seem to be widening in Danish adolescents, there are still considerable differences in the activity levels between high, middle and low social class adolescents. Consequently, there is a need for a targeted physical activity intervention among adolescents from low (and middle social class.

  1. A national survey of 'inactive' physicians in the United States of America: enticements to reentry

    Directory of Open Access Journals (Sweden)

    Brotherton Sarah E

    2011-02-01

    Full Text Available Abstract Background Physicians leaving and reentering clinical practice can have significant medical workforce implications. We surveyed inactive physicians younger than typical retirement age to determine their reasons for clinical inactivity and what barriers, real or perceived, there were to reentry into the medical workforce. Methods A random sample of 4975 inactive physicians aged under 65 years was drawn from the Physician Masterfile of the American Medical Association in 2008. Physicians were mailed a survey about activity in medicine and perceived barriers to reentry. Chi-square statistics were used for significance tests of the association between categorical variables and t-tests were used to test differences between means. Results Our adjusted response rate was 36.1%. Respondents were fully retired (37.5%, not currently active in medicine (43.0% or now active (reentered, 19.4%. Nearly half (49.5% were in or had practiced primary care. Personal health was the top reason for leaving for fully retired physicians (37.8% or those not currently active in medicine (37.8% and the second highest reason for physicians who had reentered (28.8%. For reentered (47.8% and inactive (51.5% physicians, the primary reason for returning or considering returning to practice was the availability of part-time work or flexible scheduling. Retired and currently inactive physicians used similar strategies to explore reentry, and 83% of both groups thought it would be difficult; among those who had reentered practice, 35.9% reported it was difficult to reenter. Retraining was uncommon for this group (37.5%. Conclusion Availability of part-time work and flexible scheduling have a strong influence on decisions to leave or reenter clinical practice. Lack of retraining before reentry raises questions about patient safety and the clinical competence of reentered physicians.

  2. Trends in social inequality in physical inactivity among Danish adolescents 1991-2014.

    Science.gov (United States)

    Johnsen, N F; Toftager, M; Melkevik, O; Holstein, B E; Rasmussen, M

    2017-12-01

    The aim of this study was to investigate social inequality in physical inactivity among adolescents from 1991 to 2014 and to describe any changes in inequality during this period. The analyses were based on data from the Danish part of the HBSC study, which consists of seven comparable cross-sectional studies of nationally representative samples of 11-15-year old adolescents. The available data consisted of weekly time (hours) spent on vigorous physical activity and parental occupation from 30,974 participants. In summary, 8.0% of the adolescents reported to be physically inactive, i.e. spend zero hours of vigorous leisure time physical activity per week. The proportion of physically inactive adolescents was 5.4% in high social class and 7.8% and 10.8%, respectively, in middle and low social class. The absolute social inequality measured as prevalence difference between low and high social class did not change systematically across the observation period from 1991 to 2014. Compared to high social class, OR (95% CI) for physical inactivity was 1.48 (1.32-1.65) in middle social class and 2.18 (1.92-2.47) in lower social class. This relative social inequality was similar in the seven data collection waves (p=0.971). Although the gap in physical inactivity between social classes does not seem to be widening in Danish adolescents, there are still considerable differences in the activity levels between high, middle and low social class adolescents. Consequently, there is a need for a targeted physical activity intervention among adolescents from low (and middle) social class.

  3. Excipientes de medicamentos e as informações da bula Pharmaceutical excipients and the information on drug labels

    Directory of Open Access Journals (Sweden)

    Aracy Pereira Silveira Balbani

    2006-06-01

    preservatives, dyes, sweeteners and flavouring substances in 73 pharmaceutical preparations of 35 medicines for oral administration, according to drug labeling information about the excipients. METHODS: 35 medications were selected, both over-the-counter and prescription durgs, marketed in Brazil. The sample included: analgesic/antipyretic, antimicrobial, mucoregulatory, cough and cold, decongestant, antihistamine, bronchodilator, corticosteroid, antiinflammatory and vitamin medications. We collected data on 73 preparations of these drugs, according to drug labeling information regarding preservatives, dyes, sweeteners and flavourings. RESULTS: Methylparaben and propylparaben were the most common preservatives found (43% and 35.6% respectively. The most common sweeteners were: sucrose (sugar (53.4%, sodium saccharin (38.3% and sorbitol (36.9%. Twenty-one medicines (28,7% contained two sweeteners. Colourless medicines predominated (43.8%, followed by those with sunset yellow dye (FD&C yellow no. 6 (15%. Five products (6.8% contained more than one colour agent. Tartrazine (FD&C yellow no. 5 was present in seven preparations (9.5%. Fruit was the most common flavouring found (83%. Labelings of drugs which contained sugar frequently omitted its exact concentration (77%. Of the four labelings of medicines which contained aspartame, two did not warn patients regarding phenylketonuria. CONCLUSION: Omission and inacuracy of drug labeling information on pharmaceutical excipients may expose susceptible individuals to adverse reactions caused by preservatives and dyes. Complications of inadvertent intake of sugar-containing medicines by diabetics, or aspartame intake by patients with phenylketonuria may also occur.

  4. Application of ion chromatography in pharmaceutical and drug analysis.

    Science.gov (United States)

    Jenke, Dennis

    2011-08-01

    Ion chromatography (IC) has developed and matured into an important analytical methodology in a number of diverse applications and industries, including pharmaceuticals. This manuscript provides a review of IC applications for the determinations of active and inactive ingredients, excipients, degradation products, and impurities relevant to pharmaceutical analyses and thus serves as a resource for investigators looking for insights into the use of the IC methodology in this field of application.

  5. Influence of Excipients and Spray Drying on the Physical and Chemical Properties of Nutraceutical Capsules Containing Phytochemicals from Black Bean Extract

    Directory of Open Access Journals (Sweden)

    Daniel Guajardo-Flores

    2015-12-01

    Full Text Available Black beans (Phaseolus vulgaris L. are a rich source of flavonoids and saponins with proven health benefits. Spray dried black bean extract powders were used in different formulations for the production of nutraceutical capsules with reduced batch-to-batch weight variability. Factorial designs were used to find an adequate maltodextrin-extract ratio for the spray-drying process to produce black bean extract powders. Several flowability properties were used to determine composite flow index of produced powders. Powder containing 6% maltodextrin had the highest yield (78.6% and the best recovery of flavonoids and saponins (>56% and >73%, respectively. The new complexes formed by the interaction of black bean powder with maltodextrin, microcrystalline cellulose 50 and starch exhibited not only bigger particles, but also a rougher structure than using only maltodextrin and starch as excipients. A drying process prior to capsule production improved powder flowability, increasing capsule weight and reducing variability. The formulation containing 25.0% of maltodextrin, 24.1% of microcrystalline cellulose 50, 50% of starch and 0.9% of magnesium stearate produced capsules with less than 2.5% weight variability. The spray drying technique is a feasible technique to produce good flow extract powders containing valuable phytochemicals and low cost excipients to reduce the end-product variability.

  6. Identifying overarching excipient properties towards an in-depth understanding of process and product performance for continuous twin-screw wet granulation.

    Science.gov (United States)

    Willecke, N; Szepes, A; Wunderlich, M; Remon, J P; Vervaet, C; De Beer, T

    2017-04-30

    The overall objective of this work is to understand how excipient characteristics influence the process and product performance for a continuous twin-screw wet granulation process. The knowledge gained through this study is intended to be used for a Quality by Design (QbD)-based formulation design approach and formulation optimization. A total of 9 preferred fillers and 9 preferred binders were selected for this study. The selected fillers and binders were extensively characterized regarding their physico-chemical and solid state properties using 21 material characterization techniques. Subsequently, principal component analysis (PCA) was performed on the data sets of filler and binder characteristics in order to reduce the variety of single characteristics to a limited number of overarching properties. Four principal components (PC) explained 98.4% of the overall variability in the fillers data set, while three principal components explained 93.4% of the overall variability in the data set of binders. Both PCA models allowed in-depth evaluation of similarities and differences in the excipient properties. Copyright © 2017. Published by Elsevier B.V.

  7. Aerosolization characteristics of dry powder inhaler formulations for the excipient enhanced growth (EEG) application: effect of spray drying process conditions on aerosol performance.

    Science.gov (United States)

    Son, Yoen-Ju; Worth Longest, P; Hindle, Michael

    2013-02-25

    The aim of this study was to develop a spray dried submicrometer powder formulation suitable for the excipient enhanced growth (EEG) application. Combination particles were prepared using the Buchi Nano spray dryer B-90. A number of spray drying and formulation variables were investigated with the aims of producing dry powder formulations that were readily dispersed upon aerosolization and maximizing the fraction of submicrometer particles. Albuterol sulfate, mannitol, L-leucine, and poloxamer 188 were selected as a model drug, hygroscopic excipient, dispersibility enhancer and surfactant, respectively. Formulations were assessed by scanning electron microscopy and aerosol performance following aerosolization using an Aerolizer dry powder inhaler (DPI). In vitro drug deposition was studied using a realistic mouth-throat (MT) model. Based on the in vitro aerosolization results, the best performing submicrometer powder formulation consisted of albuterol sulfate, mannitol, L-leucine and poloxamer 188 in a ratio of 30:48:20:2, containing 0.5% solids in a water:ethanol (80:20%, v/v) solution which was spray dried at 70 °C. The submicrometer particle fraction (FPF(1 μm/ED)) of this final formulation was 28.3% with more than 80% of the capsule contents being emitted during aerosolization. This formulation also showed 4.1% MT deposition. The developed combination formulation delivered a powder aerosol developed for the EEG application with high dispersion efficiency and low MT deposition from a convenient DPI device platform. Copyright © 2013 Elsevier B.V. All rights reserved.

  8. D- and I-optimal design of mixture experiments in the presence of ingredient availability constraints

    OpenAIRE

    SYAFITRI, Utami; SARTONO, Bagus; GOOS, Peter

    2015-01-01

    Mixture experiments usually involve various constraints on the proportions of the ingredients of the mixture under study. In this paper, inspired by the fact that the available stock of certain ingredients is often limited, we focus on a new type of constraint, which we refer to as an ingredient availability constraint. This type of constraint substantially complicates the search for optimal designs for mixture experiments. One difficulty, for instance, is that the optimal number of experimen...

  9. Understanding, predicting and controlling the physicochemical functionality of rice protein ingredients

    OpenAIRE

    Amagliani, Luca

    2016-01-01

    The aim of this research was to characterise the nutrient composition and protein profile of a range of intact and hydrolysed rice protein ingredients, to benchmark their physicochemical properties against those of selected commercial dairy protein ingredients, and to develop tailored solutions for understanding, predicting, modifying and controlling their functionality in food systems. The rice protein ingredients studied had protein contents in the range 32-78%, and lower levels of calcium ...

  10. Risk management of allergenic food ingredients in hospitality

    Directory of Open Access Journals (Sweden)

    Popov-Raljić Jovanka

    2017-01-01

    Full Text Available Food allergens have appeared in the last two decades as a concealed form of threat which significantly endangers public health, and their labelling on food products, drinks, and non pre-packed gastro-products is clearly defined with legal regulations. In practice, the chemical risk management is faced with several unexpected problems. Some of them are declarations or statements about allergenic ingredients, where a nutritional allergen that the food contains is labelled with an unusual name, or similar products from different manufacturers where one is safe and the other contains allergens. A hospitality facility which deals with production and distribution of unpackaged foods should, in addition to a developed HACCP concept and standardized recipes for food preparation, prepare a detailed, precise, and clearly defined plan for management of chemical risks.

  11. [Germinated or fermented legumes: food or ingredients of functional food].

    Science.gov (United States)

    Davila, Marbelly A; Sangronis, Elba; Granito, Marisela

    2003-12-01

    Epidemiological research has shown a positive association between certain diseases and dietary intake of food components found in fruits, grains, legumes, fish oil among others. Food that may provide a health benefit beyond the traditional nutrients that it contains, are named functional food. In addition to the varied nutrients, legumes contain compounds such as polyphenols, soluble fiber, alpha-galactosides and isoflavones which confer propierties of functional foods. Do to the cuse of flatus production in some people, long cooking periods, or anti-nutritional factors, legume consumption levels are limited. In this review, germination and fermentation processes will be presented as alternatives that are able to reduce or inactivate anti-nutritional factors, preserve and even improve the content of the isoflavones, or better the potencial of the legumes as functional food or as ingredients for the formulation of functional foods.

  12. Photomutagenicity of cosmetic ingredient chemicals azulene and guaiazulene

    International Nuclear Information System (INIS)

    Wang Lei; Yan Jian; Fu, Peter P.; Parekh, Karishma A.; Yu Hongtao

    2003-01-01

    The photomutagenicity of the popular skin conditioning agents azulene and guaiazulene were tested in Salmonella typhimurium TA98, TA100 and TA102. Following irradiation with UVA and/or visible light, both azulene and guaiazulene exhibited mutagenicity 4-5-fold higher than the spontaneous background mutation. In contrary, naphthalene, a structural isomer of azulene, was not photomutagenic under the same conditions. Azulene was photomutagenic when irradiated with UVA light alone, visible light alone, or a combination of UVA and visible light. Azulene and guaiazulene are not mutagenic when the experiment is conducted with the exclusion of light. Therefore, extreme care must be taken when using cosmetic products with azulene/guaiazulene as ingredients since after applying these products on the skin, exposure to sunlight is inevitable

  13. Microbial production of antioxidant food ingredients via metabolic engineering.

    Science.gov (United States)

    Lin, Yuheng; Jain, Rachit; Yan, Yajun

    2014-04-01

    Antioxidants are biological molecules with the ability to protect vital metabolites from harmful oxidation. Due to this fascinating role, their beneficial effects on human health are of paramount importance. Traditional approaches using solvent-based extraction from food/non-food sources and chemical synthesis are often expensive, exhaustive, and detrimental to the environment. With the advent of metabolic engineering tools, the successful reconstitution of heterologous pathways in Escherichia coli and other microorganisms provides a more exciting and amenable alternative to meet the increasing demand of natural antioxidants. In this review, we elucidate the recent progress in metabolic engineering efforts for the microbial production of antioxidant food ingredients - polyphenols, carotenoids, and antioxidant vitamins. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. Marketing dietary supplements in the United States: A review of the requirements for new dietary ingredients

    International Nuclear Information System (INIS)

    Noonan, Chris; Patrick Noonan, W.

    2006-01-01

    Since the passage of the Dietary Supplement Health and Education Act in 1994, the marketplace for dietary supplements has experienced dramatic growth. New products have redefined the entire marketplace, and new ingredients are introduced to consumers at lightning speed. As part of this act, laws were passed to ensure the safety of new dietary ingredients introduced into the United States marketplace. But more than 11 years later, these laws are frequently misunderstood, and more frequently ignored. This article reviews the regulatory landscape of new dietary ingredients and defines the issues manufacturers must contend with to legally market dietary supplements with new dietary ingredients in the U.S

  15. Digestibility of animal and vegetable protein ingredients by pirarucu juveniles, Arapaima gigas

    Directory of Open Access Journals (Sweden)

    Filipe dos Santos Cipriano

    Full Text Available ABSTRACT The objective of this study was to determine the apparent digestibility coefficients of energy, protein, and amino acids in protein ingredients by pirarucu juveniles. A test was conducted with six protein ingredients: meat and bone meal, fish meal, hydrolyzed feather meal, poultry by-product meal, soybean meal, and corn gluten meal. Three repetitions were used for each tested ingredient. A reference feed was used with 430 g kg−1 crude protein and 19.63 kJ g−1 gross energy. The test feeds consisted of the replacement of 30% of the reference feeds with the test ingredients. Chromium oxide was added to the feeds at 1 g kg−1 as an external marker. Eighteen juveniles with an average weight of 235±36 g were used. The best apparent digestibility coefficients of protein were found for fish meal, followed by the poultry by-product meal and meat and bone meal. However, except for gluten, all the tested ingredients presented protein digestibilities above 0.70. The crude energy apparent digestibility coefficient was higher for animal ingredients, above 0.75, than for vegetable ingredients, which presented values below 0.60. Pirarucu efficiently uses the protein from the tested ingredients, regardless of origin. However, it has a preferential ability to use the energy from animal ingredients.

  16. Put the healthy item first: Order of ingredient listing influences consumer selection.

    Science.gov (United States)

    Policastro, Peggy; Smith, Zach; Chapman, Gretchen

    2017-06-01

    This study examined effects of an order form intervention on choice of healthy ingredients among college students ordering submarine sandwiches (subs). Over eight weekly sub-nights, college students submitted 9765 orders. The order form format was manipulated in one condition making the healthier selections more salient. Main outcome measures were selection of ingredients. Multi-level logistic regression, chi square, and analysis of variance were used to examine the effect of experimental conditions on selection of ingredients. The health-salient form increased selection of healthier and decreased selection of unhealthy ingredients. The manipulation increased fiber, decreased sodium, but did not impact calorie/fat levels of the subs served.

  17. Encapsulation of natural ingredient for skin protection via nanoemulsion process

    Science.gov (United States)

    Asmatulu, Eylem; Usta, Aybala; Alzahrani, Naif; Patil, Vinay; Vanderwall, Adeesha

    2017-04-01

    Many of the sunscreens are used during the hot summer time to protect the skin surface. However, some of ingredients in the sunscreens, such as oxybenzone, retinyl palmitate and synthetic fragrances including parabens, phthalates and synthetic musk may disrupt the cells on the skin and create harmful effects to human body. Natural oils may be considered for substitution of harmful ingredients in sunscreens. Many natural oils (e.g., macadamia oil, sesame oil, almond oil and olive oil) have UV protective property and on top of that they have natural essences. Among the natural oils, olive oil has a long history of being used as a home remedy for skincare. Olive oil is used or substituted for cleanser, moisturizer, antibacterial agent and massage reliever for muscle fatigue. It is known that sun protection factor (SPF) of olive oil is around eight. There has been relatively little scientific work performed on the effect of olive oil on the skin as sunscreen. With nanoencapsulation technique, UV light protection of the olive oil can be extended which will provide better coverage for the skin throughout the day. In the present study, natural olive oil was incorporated with DI water and surfactant (sodium dodecyl sulfate - SDS) and sonicated using probe sonicators. Sonication time, and concentrations of olive oil, DI water and surfactant were investigated in detail. The produced nanoemulsions were characterized using dynamic light scattering, and UV-Vis spectroscopy. It is believed that the nanoencupsulation of olive oil could provide better skin protection by slow releasing and deeper penetration of the nanoemulsion on skin surface. Undergraduate engineering students were involved in the project and observed all the process during the laboratory studies, as well as data collection, analysis and presentation. This experience based learning will likely enhance the students' skills and interest in the scientific and engineering studies.

  18. Thermodynamic prediction of active ingredient loading in polymeric microparticles.

    Science.gov (United States)

    Tse, G; Blankschtein, D; Shefer, A; Shefer, S

    1999-06-28

    The growing use of microparticles as a controlled-delivery system for pharmaceutical and non-pharmaceutical active ingredients (AIs) has prompted a costly trial-and-error development of new and effective microparticle systems. In order to facilitate a more rational design and optimization of AI loadings in microparticles, we have developed a molecular-thermodynamic theory to predict the loading of liquid AIs in polymeric microparticles that are manufactured by a solvent evaporation process. This process involves the emulsification of a liquid polymer solution (consisting of polymer and AI dissolved in a volatile solvent) in an aqueous surfactant solution. The theory describes the equilibrium distribution of the AI between the aqueous phase and the dispersed polymeric droplets. The universal functional activity coefficient (UNIFAC) and UNIFAC-Free Volume (FV) group-contribution methods are utilized to model the nonidealities in the water and polymeric droplet phases, respectively. The inputs to the theory are: (i) the chemical structures, densities and total masses of the manufacturing ingredients, (ii) the manufacturing temperature and (iii) the glass transition temperature of the polymer. Since surfactant concentrations exceeding the critical micellar concentration (CMC) are often required in order to stabilize the dispersed polymeric droplets during the emulsion manufacturing process, the theory also accounts for AI solubilization in surfactant micelles present in the manufacturing solution. To test the AI loading predictions, we compare theoretical predictions of AI loadings in poly(lactic acid), poly(methyl methacrylate) and polystyrene microparticles to experimentally measured ones for five model AIs with varying degrees of hydrophobicity (benzyl alcohol, n-octanol, geraniol, farnesol and galaxolide). We also demonstrate how the developed theory can be utilized to screen polymers with respect to their abilities to load a given AI, as well as to provide

  19. Acute exercise is associated with reduced exhaled nitric oxide in physically inactive adults with asthma.

    Science.gov (United States)

    Scott, Hayley A; Latham, Jennifer R; Callister, Robin; Pretto, Jeffrey J; Baines, Katherine; Saltos, Nick; Upham, John W; Wood, Lisa G

    2015-06-01

    Although exercise has multiple health benefits, relatively little attention has been paid to its potential therapeutic effects in those with asthma. To examine the effects of acute exercise on inflammation in physically inactive and active adults with asthma. Fourteen adults with asthma (n = 6 physically inactive, n = 8 physically active) completed (1) 30 minutes of moderate-intensity exercise on a treadmill and (2) 30 minutes of rest in random order, with 4 weeks between sessions. Exhaled nitric oxide (eNO) was measured before and after the intervention (0, 0.5, 1, 2, 4, and 24 hours). Blood inflammatory mediators were measured before and after the intervention (0, 2, and 24 hours). Physically inactive participants had a significant decrease in eNO 4 hours after exercise (-4.8 ppb, -6.4 to -0.5 ppb, P = .028), which was not observed in physically active participants (P = .362). Interluekin-1 receptor antagonist increased in the physically inactive group 2 hours after exercise, with this increase strongly correlated with the decrease in eNO at 4 hours (R = -0.685, P = .007) and 24 hours (R = -0.659, P = .014) after exercise. Interleukin-6 was increased significantly 2 hours after exercise in physically inactive participants. Blood neutrophils and nuclear factor erythroid 2-like 2 gene expression were increased 2 hours after exercise in the overall cohort. This study demonstrates that acute moderate-intensity exercise is associated with decreased eNO in physically inactive adults with asthma and suggests that interluekin-1 receptor antagonist could have a role in mediating this effect. The attenuated response in physically active participants might be due to the sustained anti-inflammatory effects of exercise training. Future studies should investigate the impact of exercise intensity and exercise training on airway inflammation in those with asthma. Australian New Zealand Clinical Trials Registry (http://www.anzctr.org.au), registration number ACTRN

  20. Authorization and Toxicity of Veterinary Drugs and Plant Protection Products: Residues of the Active Ingredients in Food and Feed and Toxicity Problems Related to Adjuvants

    Directory of Open Access Journals (Sweden)

    Szandra Klátyik

    2017-09-01

    Full Text Available Chemical substances applied in animal husbandry or veterinary medicine and in crop protection represent substantial environmental loads, and their residues occur in food and feed products. Product approval is governed differently in these two sectors in the European Union (EU, and the occurrence of veterinary drug (VD and pesticide residues indicated by contamination notification cases in the Rapid Alert System for Food and Feed of the EU also show characteristic differences. While the initial high numbers of VD residues reported in 2002 were successfully suppressed to less than 100 cases annually by 2006 and on, the number of notification cases for pesticide residues showed a gradual increase from a low (approximately 50 cases annually initial level until 2005 to more than 250 cases annually after 2009, with a halt occurring only in 2016. Main notifiers of VD residues include Germany, Belgium, the UK, and Italy (63, 59, 42, and 31 notifications announced, respectively, and main consigning countries of non-compliances are Vietnam, India, China, and Brazil (88, 50, 34, and 23 notifications, respectively. Thus, countries of South and Southeast Asia are considered a vulnerable point with regard to VD residues entering the EU market. Unintended side effects of VDs and plant protection products may be caused not only by the active ingredients but also by various additives in these preparations. Adjuvants (e.g., surfactants and other co-formulants used in therapeutic agents and feed additives, as well as in pesticide formulations have long been considered as inactive ingredients in the aspects of the required main biological effect of the pharmaceutical or pesticide, and in turn, legal regulations of the approval and marketing of these additives specified significantly less stringent risk assessment requirements, than those specified for the active ingredients. However, numerous studies have shown additive, synergistic, or antagonistic side effects