Improvement of Cooling Technology through Atmosphere Gas Management

Energy Technology Data Exchange (ETDEWEB)

Renard, Michel; Dosogne, Edgaar; Crutzen, Jean Pierre; Raick, Jean Mare [DREVER INTERNATIONAL S.A., Liege (Belgium); Ji, Ma Jia; Jun, Lv; Zhi, Ma Bing [SHOUGANG Cold Rolling Mill Headquarter, Beijin (China)

2009-12-15

The production of advanced high strength steels requires the improvement of cooling technology. The use of high cooling rates allows relatively low levels of expensive alloying additions to ensure sufficient hardenability. In classical annealing and hot-dip galvanizing lines a mixing station is used to provide atmosphere gas containing 3-5% hydrogen and 97-95% nitrogen in the various sections of the furnace, including the rapid cooling section. Heat exchange enhancement in this cooling section can be insured by the increased hydrogen concentration. Driver international developed a patented improvement of cooling technology based on the following features: pure hydrogen gas is injected only in the rapid cooling section whereas the different sections of the furnace are supplied with pure nitrogen gas: the control of flows through atmosphere gas management allows to get high hydrogen concentration in cooling section and low hydrogen content in the other furnace zones. This cooling technology development insures higher cooling rates without additional expensive hydrogen gas consumption and without the use of complex sealing equipment between zones. In addition reduction in electrical energy consumption is obtained. This atmosphere control development can be combined with geometrical design improvements in order to get optimised cooling technology providing high cooling rates as well as reduced strip vibration amplitudes. Extensive validation of theoretical research has been conducted on industrial lines. New lines as well as existing lines, with limited modifications, can be equipped with this new development. Up to now this technology has successfully been implemented on 6 existing and 7 new lines in Europe and Asia.

Manufacture of conical springs with elastic medium technology improvement

Science.gov (United States)

Kurguzov, S. A.; Mikhailova, U. V.; Kalugina, O. B.

2018-01-01

This article considers the manufacturing technology improvement by using an elastic medium in the stamping tool forming space to improve the conical springs performance characteristics and reduce the costs of their production. Estimation technique of disk spring operational properties is developed by mathematical modeling of the compression process during the operation of a spring. A technique for optimizing the design parameters of a conical spring is developed, which ensures a minimum voltage value when operated in the edge of the spring opening.

Can eye-tracking technology improve situational awareness in paramedic clinical education?

Science.gov (United States)

Williams, Brett; Quested, Andrew; Cooper, Simon

2013-01-01

Human factors play a significant part in clinical error. Situational awareness (SA) means being aware of one's surroundings, comprehending the present situation, and being able to predict outcomes. It is a key human skill that, when properly applied, is associated with reducing medical error: eye-tracking technology can be used to provide an objective and qualitative measure of the initial perception component of SA. Feedback from eye-tracking technology can be used to improve the understanding and teaching of SA in clinical contexts, and consequently, has potential for reducing clinician error and the concomitant adverse events.

DUV light source availability improvement via further enhancement of gas management technologies

Science.gov (United States)

Riggs, Daniel J.; O'Brien, Kevin; Brown, Daniel J. W.

2011-04-01

The continuous evolution of the semiconductor market necessitates ever-increasing improvements in DUV light source uptime as defined in the SEMI E10 standard. Cymer is developing technologies to exceed current and projected light source availability requirements via significant reduction in light source downtime. As an example, consider discharge chamber gas management functions which comprise a sizable portion of DUV light source downtime. Cymer's recent introduction of Gas Lifetime Extension (GLXTM) as a productivity improvement technology for its DUV lithography light sources has demonstrated noteworthy reduction in downtime. This has been achieved by reducing the frequency of full gas replenishment events from once per 100 million pulses to as low as once per 2 billion pulses. Cymer has continued to develop relevant technologies that target further reduction in downtime associated with light source gas management functions. Cymer's current subject is the development of technologies to reduce downtime associated with gas state optimization (e.g. total chamber gas pressure) and gas life duration. Current gas state optimization involves execution of a manual procedure at regular intervals throughout the lifetime of light source core components. Cymer aims to introduce a product enhancement - iGLXTM - that eliminates the need for the manual procedure and, further, achieves 4 billion pulse gas lives. Projections of uptime on DUV light sources indicate that downtime associated with gas management will be reduced by 70% when compared with GLX2. In addition to reducing downtime, iGLX reduces DUV light source cost of operation by constraining gas usage. Usage of fluorine rich Halogen gas mix has been reduced by 20% over GLX2.

New municipal solid waste processing technology reduces volume and provides beneficial reuse applications for soil improvement and dust control

Science.gov (United States)

A garbage-processing technology has been developed that shreds, sterilizes, and separates inorganic and organic components of municipal solid waste. The technology not only greatly reduces waste volume, but the non-composted byproduct of this process, Fluff®, has the potential to be utilized as a s...

Improved animal welfare, the right technology and increased business.

Science.gov (United States)

Støier, S; Larsen, H D; Aaslyng, M D; Lykke, L

2016-10-01

Animal welfare is receiving increasing attention from the authorities, the public and NGOs. For this reason, the improvement of animal welfare and animal handling systems is of the utmost importance for the meat industry. Technological developments have led to more animal friendly systems that handle animals on the day of slaughter, and these developments will be even more important as consideration for animal welfare and sustainability is no longer just a trend but a licence to operate. Improvement of animal welfare also leads to a higher value of the carcasses due to higher product quality, less cut-off caused by fewer injuries, and reduced working load, which leads to increased business opportunities. Therefore, good animal welfare is good business, and the development and implementation of new technology is the way to obtain improved animal welfare. These subjects will be addressed using examples and cases from the pork and broiler production industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

Innovative applications of technology for nuclear power plant productivity improvements

International Nuclear Information System (INIS)

Naser, J. A.

2012-01-01

The nuclear power industry in several countries is concerned about the ability to maintain high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, and new requirements and commitments. Current plant operations are labor-intensive due to the vast number of operational and support activities required by commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the goal to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New plants are expected to perform more productively than current plants. In order to achieve and increase high productivity, it is necessary to look at innovative applications of modern technologies and new concepts of operation. The Electric Power Research Inst. is exploring and demonstrating modern technologies that enable cost-effectively maintaining current performance levels and shifts to even higher performance levels, as well as provide tools for high performance in new plants. Several modern technologies being explored can provide multiple benefits for a wide range of applications. Examples of these technologies include simulation, visualization, automation, human cognitive engineering, and information and communications technologies. Some applications using modern technologies are described. (authors)

Reducing Weight for Transportation Applications: Technology Challenges and Opportunities

Science.gov (United States)

Taub, Alan I.

Today's land, sea and air transportation industries — as a business necessity — are focused on technology solutions that will make vehicles more sustainable in terms of energy, the environment, safety and affordability. Reducing vehicle weight is a key enabler for meeting these challenges as well as increasing payload and improving performance. The potential weight reductions from substituting lightweight metals (advanced high-strength steels, aluminum, magnesium and titanium alloys) are well established. For magnesium castings, weight savings of 60% have been reported [1]. The value of weight reduction depends on the transportation sector and ranges from about 5/kg saved for automobiles to over 500/kg saved for aircraft [2]. The challenge is to optimize the material properties and develop robust, high volume, manufacturing technologies and the associated supply chain to fabricate components and subsystems at the appropriate cost for each application.

Study for improvement of light water reactor technology, (3)

International Nuclear Information System (INIS)

Suzuki, Hideaki; Morita, Terumichi; Igarashi, Hiroshi; Tabata, Hiroaki

1991-01-01

The Japan Atomic Power Company has performed some studies, which are referred to as 'some feasibility studies of LWR technology', in order to help improve and up-grade the light water reactor technology. We would like to show the key results of the above studies in an orderly fashion in this document. As the third issue, this paper describes the study of the feasibility of applying a suppression pool system in a 4-loop PWR plant in order to reduce containment volume and evaluates the merits of such a system. The results confirmed the feasibility of such a plant consisting of a 4-loop plant with a suppression pool system. The expected merits of a suppression pool type PWR are as follows: (1) The volume within the containment boundary is half of that for the conventional plant. This reduces the material quantity substantially. (2) A wider layout space is obtained since the operating floor is located outside the containment are. And this improves the maneuverability of plant outage. (3) Low center of gravity of the plant contributes to improving the ability to withstand seismic activity. Although there are some open items left that should be confirmed, we consider that PWR with small CV is an appealing plant in the light of further sales points such as relaxing siting conditions, extending the use of robotics and so on. (author)

Improving student retention in computer engineering technology

Science.gov (United States)

Pierozinski, Russell Ivan

The purpose of this research project was to improve student retention in the Computer Engineering Technology program at the Northern Alberta Institute of Technology by reducing the number of dropouts and increasing the graduation rate. This action research project utilized a mixed methods approach of a survey and face-to-face interviews. The participants were male and female, with a large majority ranging from 18 to 21 years of age. The research found that participants recognized their skills and capability, but their capacity to remain in the program was dependent on understanding and meeting the demanding pace and rigour of the program. The participants recognized that curriculum delivery along with instructor-student interaction had an impact on student retention. To be successful in the program, students required support in four domains: academic, learning management, career, and social.

Projecting technology change to improve space technology planning and systems management

Science.gov (United States)

Walk, Steven Robert

2011-04-01

Projecting technology performance evolution has been improving over the years. Reliable quantitative forecasting methods have been developed that project the growth, diffusion, and performance of technology in time, including projecting technology substitutions, saturation levels, and performance improvements. These forecasts can be applied at the early stages of space technology planning to better predict available future technology performance, assure the successful selection of technology, and improve technology systems management strategy. Often what is published as a technology forecast is simply scenario planning, usually made by extrapolating current trends into the future, with perhaps some subjective insight added. Typically, the accuracy of such predictions falls rapidly with distance in time. Quantitative technology forecasting (QTF), on the other hand, includes the study of historic data to identify one of or a combination of several recognized universal technology diffusion or substitution patterns. In the same manner that quantitative models of physical phenomena provide excellent predictions of system behavior, so do QTF models provide reliable technological performance trajectories. In practice, a quantitative technology forecast is completed to ascertain with confidence when the projected performance of a technology or system of technologies will occur. Such projections provide reliable time-referenced information when considering cost and performance trade-offs in maintaining, replacing, or migrating a technology, component, or system. This paper introduces various quantitative technology forecasting techniques and illustrates their practical application in space technology and technology systems management.

Advanced digital technology - improving nuclear power plant performance through maintainability

International Nuclear Information System (INIS)

Ford, J.L.; Senechal, R.R.; Altenhein, G.D.; Harvey, R.P.

1998-01-01

In today's energy sector there is ever increasing pressure on utilities to operate power plants at high capacity factors. To ensure nuclear power is competitive into the next century, it is imperative that strategic design improvements be made to enhance the performance of nuclear power plants. There are a number of factors that affect a nuclear power plant's performance; lifetime maintenance is one of the major contributors. The maturing of digital technology has afforded ABB the opportunity to make significant design improvements in the area of maintainability. In keeping with ABB's evolutionary advanced nuclear plant design approach, digital technology has systematically been incorporated into the control and protection systems of the most recent Korean nuclear units in operation and under construction. One example of this was the multi-functional design team approach that was utilized for the development of ABB's Digital Plant Protection System (DPPS). The design team consisted of engineers, maintenance technicians, procurement specialists and manufacturing personnel in order to provide a complete perspective on all facets of the design. The governing design goals of increased reliability and safety, simplicity of design, use of off-the-shelf products and reduced need for periodic surveillance testing were met with the selection of proven ABB-Advant Programmable Logic Controllers (PLCs) as the heart of the DPPS. The application of digital PLC technology allows operation for extended periods without requiring routine maintenance or re-calibration. A well documented commercial dedication program approved by the United States Nuclear Regulatory Commission (US NRC) as part of the System 80+ TM Advanced Light Water Reactor Design Certification Program, allowed the use of off-the shelf products in the design of the safety protection system. In addition, a number of mechanical and electrical improvements were made which support maintainability. The result is a DPPS

Reduced cost and improved figure of sapphire optical components

Science.gov (United States)

Walters, Mark; Bartlett, Kevin; Brophy, Matthew R.; DeGroote Nelson, Jessica; Medicus, Kate

2015-10-01

Sapphire presents many challenges to optical manufacturers due to its high hardness and anisotropic properties. Long lead times and high prices are the typical result of such challenges. The cost of even a simple 'grind and shine' process can be prohibitive. The high precision surfaces required by optical sensor applications further exacerbate the challenge of processing sapphire thereby increasing cost further. Optimax has demonstrated a production process for such windows that delivers over 50% time reduction as compared to traditional manufacturing processes for sapphire, while producing windows with less than 1/5 wave rms figure error. Optimax's sapphire production process achieves significant improvement in cost by implementation of a controlled grinding process to present the best possible surface to the polishing equipment. Following the grinding process is a polishing process taking advantage of chemical interactions between slurry and substrate to deliver excellent removal rates and surface finish. Through experiments, the mechanics of the polishing process were also optimized to produce excellent optical figure. In addition to reducing the cost of producing large sapphire sensor windows, the grinding and polishing technology Optimax has developed aids in producing spherical sapphire components to better figure quality. In addition to reducing the cost of producing large sapphire sensor windows, the grinding and polishing technology Optimax has developed aids in producing spherical sapphire components to better figure quality. Through specially developed polishing slurries, the peak-to-valley figure error of spherical sapphire parts is reduced by over 80%.

Technological measures to improve automotive product quality

OpenAIRE

Gladkov, V.; Kruglov, S.

2010-01-01

The paper examines the basic technological measures aimed at improving product quality in automotive industry. While paying due attention to solving organizational and technological problems, including the development of certification systems for production processes, it is also necessary to improve the technical standards of specific technologies, equipment and materials as they largely determine product quality. Special emphasis is given to the importance of improving the production of auto...

Reducing automotive emissions—The potentials of combustion engine technologies and the power of policy

International Nuclear Information System (INIS)

Berggren, Christian; Magnusson, Thomas

2012-01-01

Reducing transport emissions, in particular vehicular emissions, is a key element for mitigating the risks of climate change. In much of the academic and public discourse the focus has been on alternative vehicle technologies and fuels (e.g. electric cars, fuel cells and hydrogen), whereas vehicles based on internal combustion engines have been perceived as close to their development limits. This paper offers a different perspective by demonstrating the accelerated improvement processes taking place in established combustion technologies as a result of a new competition between manufacturers and technologies, encouraged both by more stringent EU legislation and new CAFE levels in the US. The short-term perspective is complemented by an analysis of future improvement potentials in internal combustion technologies, which may be realized if efficient regulation is in place. Based on a comparison of four different regulatory approaches, the paper identifies the need for a long-term technology-neutral framework with stepwise increasing stringencies, arguing that this will encourage continual innovation and diffusion in the most effective way. - Highlights: ► From 1990 to 2008, CO 2 emissions from road transportation in the EU increased by 21%. ► Alternative vehicles are important, but internal combustion engines (ICE) will remain dominant. ► The paper shows how competition and new regulation accelerate the improvement of ICE-vehicles. ► The key factor for long-term emissions reduction is appropriate regulation, not technology. ► Most effective is a technology-neutral framework with stepwise increasing stringencies.

Reducing Technology-Induced Errors: Organizational and Health Systems Approaches.

Science.gov (United States)

Borycki, Elizabeth M; Senthriajah, Yalini; Kushniruk, Andre W; Palojoki, Sari; Saranto, Kaija; Takeda, Hiroshi

2016-01-01

Technology-induced errors are a growing concern for health care organizations. Such errors arise from the interaction between healthcare and information technology deployed in complex settings and contexts. As the number of health information technologies that are used to provide patient care rises so will the need to develop ways to improve the quality and safety of the technology that we use. The objective of the panel is to describe varying approaches to improving software safety from and organizational and health systems perspective. We define what a technology-induced error is. Then, we discuss how software design and testing can be used to improve health information technologies. This discussion is followed by work in the area of monitoring and reporting at a health district and national level. Lastly, we draw on the quality, safety and resilience literature. The target audience for this work are nursing and health informatics researchers, practitioners, administrators, policy makers and students.

Reducing OR Traffic Using Education, Policy Development, and Communication Technology.

Science.gov (United States)

Esser, Jennifer; Shrinski, Keonemana; Cady, Rhonda; Belew, John

2016-01-01

A bundled approach to surgical site infection (SSI) prevention strategies includes reducing OR traffic. A nurse-led quality improvement (QI) team sought to reduce OR traffic through education and a process change that included wireless communication technology and policy development. The team measured OR traffic by counting the frequency of door openings per hour in seven surgical suites during 305 surgical procedures conducted during similar 22-week periods before and after the QI project intervention. Door openings decreased significantly (P < 0.05) from an average of 37.8 per hour to 32.8 per hour after the QI project intervention. This suggests that our multifaceted approach reduces OR traffic. The next steps of this project include analyzing automatically captured video to understand OR traffic patterns and expanding education to departments and external personnel frequently present in our surgical suites. Future research evaluating the effectiveness of this OR traffic initiative on SSI incidence is recommended. Copyright © 2016 AORN, Inc. Published by Elsevier Inc. All rights reserved.

The Research on Improved Companding Transformation for Reducing PAPR in Underwater Acoustic OFDM Communication System

Directory of Open Access Journals (Sweden)

Jinqiu Wu

2016-01-01

Full Text Available To solve the problem of the high peak-to-average power ratio (PAPR in Orthogonal Frequency Division Multiplexing (OFDM for the underwater acoustic communication system, the paper offers a method of reducing PAPR which combines the amplitude limiting and the improved nonlinear transformation. Traditional amplitude limiting technique can reduce PAPR in OFDM system effectively, at the cost of reducing the bit error rate (BER. However the companding transformation has far less computation complexity than SLM or PTS technologies and can improve the BER performance compared to the amplitude limiting technique simultaneously. The paper combines these two kinds of techniques, takes full use of advantages of the two method, and puts forward a low-complexity scheme choosing parameters that are more appropriate to the underwater acoustic field, with the result of improved BER performance even in lower SNR. Both simulation and experiment results show that the new method which combines clipping and companding transformation can effectively reduce the PAPR in the underwater acoustic OFDM communication system and improve the BER performance simultaneously.

Improved Switching Characteristics of Fast Power MOSFETs Applying Solder Bump Technology

Directory of Open Access Journals (Sweden)

Sibylle Dieckerhoff

2008-01-01

Full Text Available The impact of a reduced package stray inductance on the switching performance of fast power MOSFETs is discussed applying advanced 3D packaging technologies. Starting from an overview over new packaging approaches, a solder bump technology using a flexible PI substrate is exemplarily chosen for the evaluation. Measurement techniques to determine the stray inductance are discussed and compared with a numerical solution based on the PEEC method. Experimental results show the improvement of the voltage utilization while there is only a slight impact on total switching losses.

The Modern Technologies to Reduce Turnover of Company Staff

Directory of Open Access Journals (Sweden)

Zaiko Tetiana O.

2017-12-01

Full Text Available The article is aimed at analyzing and substantiating the use in practice of modern technologies to reduce turnover of staff, which do not bear significant financial costs for the company. The authors have proved that non-material measures to reduce staff turnover in companies are becoming predominant nowadays. Among them as the most important are indicated: introduction of flexible schedule (mode of work, transition to the remote form of employment, and distribution of internal shares, in particular related to the strengthening of cohesion of staff, its team spirit. Also the reasons of transition from material to intangible factors of influence on conduct of workers have been disclosed. The advantages of non-material measures of the staff turnover reduction for both employees and employers were analyzed. For the first ones the most important are motivation and job satisfaction, while for the others it is reduction of staff turnover, formation of the responsible worker, improvement of quality and productivity of work.

Microplasma radiofrequency technology combined with triamcinolone improved the therapeutic effect on Chinese patients with hypertrophic scar and reduced the risk of tissue atrophy.

Science.gov (United States)

Yu, Shui; Li, Hengjin

2016-01-01

The current study aimed to assess the value of microplasma radiofrequency technology combined with triamcinolone for the therapy of Chinese patients with hypertrophic scar. A total of 120 participants with hypertrophic scars were enrolled in the current study. Participants were divided into two groups based on sex, and then randomly and evenly divided into four groups (Groups A, B, C, and D). Participants in Group A received microplasma radiofrequency technology combined with triamcinolone. Participants in Group B received microplasma radiofrequency technology combined with normal saline. Participants in Groups C and D received triamcinolone (40 and 10 mg/mL) injected directly into scar. Experienced physicians evaluated the condition of scars according to the Vancouver Scar Scale 1 month before and after the therapy. There was no difference in age, sex, area, height and location of scars, and Vancouver Scar Scale scores before the therapy between any groups (P>0.05 for all). Vancouver Scar Scale scores after the therapy were significantly lower than those before the therapy in all groups (P0.05 for all). Incidences of tissue atrophy after the therapy were significantly lower in Groups A and B than in Group C (P0.05 for all). Microplasma radiofrequency technology combined with triamcinolone improved the therapeutic effect on Chinese patients with hypertrophic scar and reduced the risk of tissue atrophy compared with the use of either microplasma radiofrequency technology or triamcinolone injection alone.

Use of Remote Technology in the Surface Water Environmental Monitoring Program at SRS Reducing Measurements in the Field - 13336

International Nuclear Information System (INIS)

Eddy, T.; Terry, B.; Meyer, A.; Hall, J.; Allen, P.; Hughey, D.; Hartley, T.

2013-01-01

There are a wide range of sensor and remote technology applications available for use in environmental monitoring programs. Each application has its own set of limitations and can be challenging when attempting to utilize it under diverse environmental field conditions. The Savannah River Site Environmental Monitoring Program has implemented several remote sensing and surface water flow technologies that have increased the quality of the data while reducing the number of field measurements. Implementation of this technology reduced the field time for personnel that commute across the Savannah River Site (SRS) over a span of 310 square miles. The wireless surface water flow technology allows for immediate notification of changing field conditions or equipment failure thus reducing data-loss or erroneous field data and improving data-quality. This wireless flow technology uses the stage-to-flow methodology coupled with implementation of a robust highly accurate Acoustic Doppler Profiler system for measuring discharge under various field conditions. Savings for implementation of the wireless flow application and Flowlink R technology equates to approximately 1175 hours annually for the radiological liquid effluent and surveillance programs. The SonTek River Suveyor and Flowtracker technologies are utilized for calibration of the wireless flow monitoring devices in the site streams and validation of effluent flows at the SRS. Implementation of similar wireless devices is also planned in the National Pollutant Discharge Elimination System (NPDES) Storm-water Monitoring Program. SRS personnel have been developing a unique flow actuator device. This device activates an ISCO TM automated sampler under flowing conditions at storm-water outfall locations across the site. This technology is unique in that it was designed to be used under field conditions with rapid changes in flow and sedimentation where traditional actuators have been unsuccessful in tripping the automated

Competitive investments in cost reducing process improvement : The role of managerial incentives and spillover learning

NARCIS (Netherlands)

Veldman, Jasper; Gaalman, Gerard J.c.

2015-01-01

We study the rivalry between two firms and consider the effect of spillovers when the firms' operations and technology managers are given bonuses for cost reduction. We model a game in which the firm owners independently offer their manager a bonus to stimulate cost reducing process improvement

New Technologies for Reducing Aviation Weather-Related Accidents

Science.gov (United States)

Stough, H. Paul, III; Watson, James F., III; Jarrell, Michael A.

2006-01-01

The National Aeronautics and Space Administration (NASA) has developed technologies to reduce aviation weather-related accidents. New technologies are presented for data-link and display of weather information to aircraft in flight, for detection of turbulence ahead of aircraft in flight, and for automated insitu reporting of atmospheric conditions from aircraft.

Recent technology on steam turbine performance improvement

International Nuclear Information System (INIS)

Hirada, M.; Watanabe, E.; Tashiro, H.

1991-01-01

Continuous efforts have been made to improve turbine efficiency by applying the latest aerodynamic technologies to meet the energy saving requirement. In recent years, there has been considerable improvement in the field of computational fluid dynamics and these new technologies have been applied to the new blade design for HP, IP and LP turbines. Experimental verification for the new blade in turbine tests has established the overall turbine performance improvement and the excellent correspondence of flow pattern to the predicted value. This paper introduces the latest design technologies for the newly developed high efficiency blade and the verification test results

Technology developments for improved tritium management

International Nuclear Information System (INIS)

Miller, J.M.; Spagnolo, D.A.

1994-06-01

Tritium technology developments have been an integral part of the advancement of CANDU reactor technology. An understanding of tritium behaviour within the heavy-water systems has led to improvements in tritium recovery processes, tritium measurement techniques and overall tritium control. Detritiation technology has been put in place as part of heavy water and tritium management practices. The advances made in these technologies are summarized. (author). 20 refs., 5 figs

Improvement of fuel combustion technologies

Energy Technology Data Exchange (ETDEWEB)

Tumanovskii, A.G.; Babii, V.I.; Enyakin, Y.P.; Kotler, V.R.; Ryabov, G.V.; Verbovetskii, E.K.; Nadyrov, I.I. [All-Russian Thermal Engineering Institute, Moscow (Russian Federation)

1996-07-01

The main problems encountered in the further development of fuel combustion technologies at thermal power stations in Russia are considered. Experience is generalized and results are presented on the efficiency with which nitrogen oxide emissions are reduced by means of technological methods when burning natural gas, fuel oil, and coal. The problems that arise in the introduction of new combustion technologies and in using more promising grades of coal are considered. The results studies are presented that show that low grade Russian coals can be burnt in circulating fluidized bed boilers. 14 refs., 5 figs., 4 tabs.

Implementing technology to improve medication safety in healthcare facilities: a literature review.

Science.gov (United States)

Hidle, Unn

Medication errors remain one of the most common causes of patient injuries in the United States, with detrimental outcomes including adverse reactions and even death. By developing a better understanding of why and how medication errors occur, preventative measures may be implemented including technological advances. In this literature review, potential methods of reducing medication errors were explored. Furthermore, technology tools available for medication orders and administration are described, including advantages and disadvantages of each system. It was found that technology can be an excellent aid in improving safety of medication administration. However, computer technology cannot replace human intellect and intuition. Nurses should be involved when implementing any new computerized system in order to obtain the most appropriate and user-friendly structure.

Can information technology improve my ambulatory practice ...

African Journals Online (AJOL)

eHealth is the use of information and communication technologies for health. mHealth is the use of mobile technology in health. As with all information technology (IT), advances in development are rapidly taking place. The application of such technology to individual ambulatory anaesthesia practice should improve the ...

Modern technologies for improving cleaning and disinfection of environmental surfaces in hospitals.

Science.gov (United States)

Boyce, John M

2016-01-01

Experts agree that careful cleaning and disinfection of environmental surfaces are essential elements of effective infection prevention programs. However, traditional manual cleaning and disinfection practices in hospitals are often suboptimal. This is often due in part to a variety of personnel issues that many Environmental Services departments encounter. Failure to follow manufacturer's recommendations for disinfectant use and lack of antimicrobial activity of some disinfectants against healthcare-associated pathogens may also affect the efficacy of disinfection practices. Improved hydrogen peroxide-based liquid surface disinfectants and a combination product containing peracetic acid and hydrogen peroxide are effective alternatives to disinfectants currently in widespread use, and electrolyzed water (hypochlorous acid) and cold atmospheric pressure plasma show potential for use in hospitals. Creating "self-disinfecting" surfaces by coating medical equipment with metals such as copper or silver, or applying liquid compounds that have persistent antimicrobial activity surfaces are additional strategies that require further investigation. Newer "no-touch" (automated) decontamination technologies include aerosol and vaporized hydrogen peroxide, mobile devices that emit continuous ultraviolet (UV-C) light, a pulsed-xenon UV light system, and use of high-intensity narrow-spectrum (405 nm) light. These "no-touch" technologies have been shown to reduce bacterial contamination of surfaces. A micro-condensation hydrogen peroxide system has been associated in multiple studies with reductions in healthcare-associated colonization or infection, while there is more limited evidence of infection reduction by the pulsed-xenon system. A recently completed prospective, randomized controlled trial of continuous UV-C light should help determine the extent to which this technology can reduce healthcare-associated colonization and infections. In conclusion, continued efforts to

Modern technologies for improving cleaning and disinfection of environmental surfaces in hospitals

Directory of Open Access Journals (Sweden)

John M. Boyce

2016-04-01

Full Text Available Abstract Experts agree that careful cleaning and disinfection of environmental surfaces are essential elements of effective infection prevention programs. However, traditional manual cleaning and disinfection practices in hospitals are often suboptimal. This is often due in part to a variety of personnel issues that many Environmental Services departments encounter. Failure to follow manufacturer’s recommendations for disinfectant use and lack of antimicrobial activity of some disinfectants against healthcare-associated pathogens may also affect the efficacy of disinfection practices. Improved hydrogen peroxide-based liquid surface disinfectants and a combination product containing peracetic acid and hydrogen peroxide are effective alternatives to disinfectants currently in widespread use, and electrolyzed water (hypochlorous acid and cold atmospheric pressure plasma show potential for use in hospitals. Creating “self-disinfecting” surfaces by coating medical equipment with metals such as copper or silver, or applying liquid compounds that have persistent antimicrobial activity surfaces are additional strategies that require further investigation. Newer “no-touch” (automated decontamination technologies include aerosol and vaporized hydrogen peroxide, mobile devices that emit continuous ultraviolet (UV-C light, a pulsed-xenon UV light system, and use of high-intensity narrow-spectrum (405 nm light. These “no-touch” technologies have been shown to reduce bacterial contamination of surfaces. A micro-condensation hydrogen peroxide system has been associated in multiple studies with reductions in healthcare-associated colonization or infection, while there is more limited evidence of infection reduction by the pulsed-xenon system. A recently completed prospective, randomized controlled trial of continuous UV-C light should help determine the extent to which this technology can reduce healthcare-associated colonization and infections

Improving the Technology of Obtaining Technical Ethanol from Alternative Raw Materials

Directory of Open Access Journals (Sweden)

Sergіj Petrov

2018-05-01

Full Text Available The purpose of the article is to study the properties of fallen leaves as raw materials for the production of bioethanol; Improvement of the technology of recycling cellulosic raw materials into bioethanol in the most energy-efficient and ecological way. As a result of the study, it has been found out that the production of biofuels from renewable raw materials is characterized by features of innovative technology: the rapid growth of this sector of economy is accompanied by a significant increase in market share. The use of fallen leaves as raw material will eliminate the current conflict of interests associated with the use of food raw materials for the production of bioethanol, will prevent the withdrawal of resources from the sphere of food production. Significant positive factors in the production and use of biofuels are improvement of environmental conditions, reduction of the harmful effects of exhaust gases on the human body, reducing environmental pollution and, consequently, reducing morbidity and associated costs of medical care. The use of bioethanol as an ecobiopilot makes it possible to increase the octane number of fuel, and, accordingly, increase the efficiency of the engine. Thus, the use of bioethanol leads to a qualitative improvement of technical and economic indicators, which is also an indicator of innovation. The threat of reducing (exhausting non-renewable sources of energy is also the factor that necessitates the development and improvement of biofuel production technology. The relatively low profitability of biofuel production is due to the low yield of the target product and the high cost of pre-treatment of cellulose raw materials. The method of obtaining bioethanol from renewable non-demanded raw materials - fallen leaves - was improved. The technique allows to increase the bioethanol yield due to more effective hydrolysis of hard-hydrolysable polysaccharides. Further development of the study of the differences in

How to improve plant efficiency through leading plant monitoring and control system technology-Almaraz NPP Samo

International Nuclear Information System (INIS)

Garcia Rodriguez, A.; Schwee, S.M.

1994-01-01

The nuclear industry is currently faced with an intense pressure to reduce the cost of electric production. To achieve these cost reductions, utilities are changing the way they have traditionally operated. They are embracing innovative processes and systems to fundamentally change the way they have operated and maintained their plants. Plant monitoring and control technology has been instrumental in affecting these rapid and proactive changes. Our challenge is to use these new technologies in ways that improve plant reliability while lowering operation and maintenance costs. What must we do to increase operational time, improve safety and reliability while reducing all costs including fixed as well as labor? We will discuss an overall plant monitoring system vision that will allow these changes in operational practices. (Author)

New NOx cleansing technology can reduce industry emissions

International Nuclear Information System (INIS)

2006-01-01

The Norwegian, Bergen-based company ECO Energy has recently launched a new cleaning technology halving NO x emissions from industry plants without requiring large investments. Thus, governmental promises to finance NO x cleaning equipment for Norwegian industry have become less expensive to reach. ECO Energy has ensured world patent on the 'stopNOx' technology. Its method consists of adding water and urea to oil before the combustion process. The technology has been applied in Italy, reducing NO x emissions from industry in average with above 50 percent (ml)

Technology Opportunities to Reduce U.S. Greenhouse Gas Emissions

Energy Technology Data Exchange (ETDEWEB)

National Lab Directors, . .

2001-04-05

The rise in greenhouse gas emissions from fossil fuel combustion and industrial and agricultural activities has aroused international concern about the possible impacts of these emissions on climate. Greenhouse gases--mostly carbon dioxide, some methane, nitrous oxide and other trace gases--are emitted to the atmosphere, enhancing an effect in which heat reflected from the earth's surface is kept from escaping into space, as in a greenhouse. Thus, there is concern that the earth's surface temperature may rise enough to cause global climate change. Approximately 90% of U.S. greenhouse gas emissions from anthropogenic sources come from energy production and use, most of which are a byproduct of the combustion of fossil fuels. On a per capita basis, the United States is one of the world's largest sources of greenhouse gas emissions, comprising 4% of the world's population, yet emitting 23% of the world's greenhouse gases. Emissions in the United States are increasing at around 1.2% annually, and the Energy Information Administration forecasts that emissions levels will continue to increase at this rate in the years ahead if we proceed down the business-as-usual path. President Clinton has presented a two-part challenge for the United States: reduce greenhouse gas emissions and grow the economy. Meeting the challenge will mean that in doing tomorrow's work, we must use energy more efficiently and emit less carbon for the energy expended than we do today. To accomplish these goals, President Clinton proposed on June 26, 1997, that the United States ''invest more in the technologies of the future''. In this report to Secretary of Energy Pena, 47 technology pathways are described that have significant potential to reduce carbon dioxide emissions. The present study was completed before the December 1997 United Nations Framework Convention on Climate Change and is intended to provide a basis to evaluate technology

Missed Opportunity? Leveraging Mobile Technology to Reduce Racial Health Disparities.

Science.gov (United States)

Ray, Rashawn; Sewell, Abigail A; Gilbert, Keon L; Roberts, Jennifer D

2017-10-01

Blacks and Latinos are less likely than whites to access health insurance and utilize health care. One way to overcome some of these racial barriers to health equity may be through advances in technology that allow people to access and utilize health care in innovative ways. Yet, little research has focused on whether the racial gap that exists for health care utilization also exists for accessing health information online and through mobile technologies. Using data from the Health Information National Trends Survey (HINTS), we examine racial differences in obtaining health information online via mobile devices. We find that blacks and Latinos are more likely to trust online newspapers to get health information than whites. Minorities who have access to a mobile device are more likely to rely on the Internet for health information in a time of strong need. Federally insured individuals who are connected to mobile devices have the highest probability of reliance on the Internet as a go-to source of health information. We conclude by discussing the importance of mobile technologies for health policy, particularly related to developing health literacy, improving health outcomes, and contributing to reducing health disparities by race and health insurance status. Copyright © 2017 by Duke University Press.

Advancing rig design: latest rig technologies improving efficiency and safety

Energy Technology Data Exchange (ETDEWEB)

Greenaway, R.

1997-12-01

Recent advances in drilling rig technologies that improve the ways for finding oil and natural gas, and are also solving some safety and transportation problems, have been reviewed. The coiled tubing drilling rig developed by joint venture TransOcean Ensign Drilling Technology was one of the innovations described. It is able to run a three-and-a-quarter inch coiled tubing, the only system capable of doing this in a land-based application. Tesco Corporation`s new casing drilling rig, which is expected to lower the cost of moving the rig, and Brinkerhoff Drilling`s new generation modular (NGM)-rig, claimed to be the most mobile rig in North America, are other new developments worthy of note. Tesco`s casing drilling rig has the potential to reduce drilling costs by as much as 30 to 40 per cent, while the NGM-rig could reduce rig mobilization time by 50 to 80 per cent, and the number of wells drilled by the same rig could increase by 20 per cent, due to the NGM-rig`s versatility and flexibility.

Development of a Field Demonstration for Cost-Effective Low-Grade Heat Recovery and Use Technology Designed to Improve Efficiency and Reduce Water Usage Rates for a Coal-Fired Power Plant

Energy Technology Data Exchange (ETDEWEB)

Noble, Russell [Southern Company Services, Incorporated, Birmingham, AL (United States); Dombrowski, K. [AECOM Technical Services, Austin, TX (United States); Bernau, M. [AECOM Technical Services, Austin, TX (United States); Morett, D. [AECOM Technical Services, Austin, TX (United States); Maxson, A. [EPRI, Palo Alto, CA (United States); Hume, S. [EPRI, Palo Alto, CA (United States)

2016-06-30

Coal-based power generation systems provide reliable, low-cost power to the domestic energy sector. These systems consume large amounts of fuel and water to produce electricity and are the target of pending regulations that may require reductions in water use and improvements in thermal efficiency. While efficiency of coal-based generation has improved over time, coal power plants often do not utilize the low-grade heat contained in the flue gas and require large volumes of water for the steam cycle make-up, environmental controls, and for process cooling and heating. Low-grade heat recovery is particularly challenging for coal-fired applications, due in large part to the condensation of acid as the flue gas cools and the resulting potential corrosion of the heat recovery materials. Such systems have also not been of significant interest as recent investments on coal power plants have primarily been for environmental controls due to more stringent regulations. Also, in many regions, fuel cost is still a pass-through to the consumer, reducing the motivation for efficiency improvements. Therefore, a commercial system combining low-grade heat-recovery technologies and associated end uses to cost effectively improve efficiency and/or reduce water consumption has not yet been widely applied. However, pressures from potential new regulations and from water shortages may drive new interest, particularly in the U.S. In an effort to address this issue, the U.S. Department of Energy (DOE) has sought to identify and promote technologies to achieve this goal.

Institute a modest carbon tax to reduce carbon emissions, finance clean energy technology development, cut taxes, and reduce the deficit

Energy Technology Data Exchange (ETDEWEB)

Muro, Mark; Rothwell, Jonathan

2012-11-15

The nation should institute a modest carbon tax in order to help clean up the economy and stabilize the nation’s finances. Specifically, Congress and the president should implement a $20 per ton, steadily increasing carbon excise fee that would discourage carbon dioxide emissions while shifting taxation onto pollution, financing energy efficiency (EE) and clean technology development, and providing opportunities to cut taxes or reduce the deficit. The net effect of these policies would be to curb harmful carbon emissions, improve the nation’s balance sheet, and stimulate job-creation and economic renewal.

Development of improved technology for decommissioning operations

International Nuclear Information System (INIS)

Allen, R.P.

1982-07-01

This paper describes the technology development activities conducted at Pacific Northwest Laboratory under US Department of Energy sponsorship to help ensure the availability of safe, cost-effective and environmentally sound decommissioning technology for radioactively contaminated facilities. These improved decommissioning technologies include techniques for the removal of contaminated concrete surfaces and coatings, adaptation of electropolishing and vibratory finishing decontamination techniques for field decommissioning applications, development of sensitive field instrumentation and methods for the monitoring of large surface areas, techniques for the field sectioning of contaminated components, improved contamination-stabilizing coatings and application methods, and development of a small solidification system for the field solidification of liquid waste. The results of cost/benefit studies for some of these technologies are also reported

Diagnosis of an alternative ammonia process technology to reduce exergy losses

International Nuclear Information System (INIS)

Ghannadzadeh, Ali; Sadeqzadeh, Majid

2016-01-01

Highlights: • Pinpointed non-efficient units by visualized exergetic ammonia process flowsheets. • Recommended ways towards sustainable ammonia productions based on exergy-loss sources. • Demonstrated applicability of the exergetic solutions panel on an ammonia process. - Abstract: Ammonia production through more efficient technologies can be achieved using exergy analysis. Ammonia production is one of the most important but also one of most energy consuming processes in the chemical industry. Based on a panel of solutions previously developed, this study helps to identify potential areas of improvement using an exergy analysis that covers all aspects of conventional ammonia synthesis and separation. The total internal and external exergy losses are calculated as 3,152 and 6,364 kJ/kg, respectively. The process is then divided into five main functional blocks based on their exergy losses. The reforming block contains the largest exergy loss (3,098 kJ/kg) and thus the largest potential for improvement including preheating cold feed through an economizer, developing technology towards isobaric mixing, and pressure drop reduction in the secondary reformer as the main contributors to the irreversibility (1,302 kJ/kg) in this block. The second largest exergy loss resides in the ammonia synthesis block (3,075 kJ/kg) where solutions such as reduced temperature rise across the compressor, proper compressor isolation, reducing undesired components such as argon in the reactor feed, and using lower temperatures for reactor outlet streams, are proposed to decrease the exergy losses. Throttling process in the syngas separator is the key contributing mechanism for the irreversibility (1,635 kJ/kg exergy losses) in the gas upgrading block. The exergy losses in the residual ammonia removal block (833 kJ/kg exergy losses) are mainly due to the stripper and the absorber column where a modified column design might be helpful. The highest exergy loss in the preheating block

Reducing the acidity of Arabica coffee beans by ohmic fermentation technology

Directory of Open Access Journals (Sweden)

Reta

2017-07-01

Full Text Available Coffee is widely consumed not only because of its typical taste, but coffee has antioxidant properties because of its polygons, and it stimulates brain performance. The main problem with the consumption of coffee is its content of caffeine. Caffeine when consumed in excess, can increase muscle tension, stimulate the heart, and increase the secretion of gastric acid. In this research, we applied ohmic fermentation technology, which is specially designed to mimic the stomach. Arabica coffee has high acidity that needs to be reduced than Luwak coffee, although it is cheaper. Hence, the ohmic technology with a time and temperature variation were applied to measure the total acidity of the coffee to determine optimum fermentation conditions. Results revealed that the total acidity of the coffee varied with fermentation conditions (0.18% – 0.73%. Generally, the longer the fermentation and the higher the temperature, the lower the total acidity. The acidity of the Luwak coffee through natural fermentation was 2.34%, which is substantially higher than the total acidity from the ohmic samples. Ohmic-based fermentation technology, therefore, offers improvements in coffee quality.

Improvement of radioisotope production technology

International Nuclear Information System (INIS)

Li Yongjian

1987-01-01

The widespreading and deepgoing applications of radioisotopes results the increasing demands on both quality and quantity. This in turn stimulating the production technology to be improved unceasingly to meet the different requirements on availability, variety, facility, purity, specific activity and specificity. The major approaches of achieving these improvements including: optimizing mode of production; enhancing irradiation conditions; amelioration target arrangement; adapting nuclear process and inventing chemical processing. (author)

Minimally Invasive Spine Metastatic Tumor Resection and Stabilization: New Technology Yield Improved Outcome

Directory of Open Access Journals (Sweden)

Ran Harel

2015-01-01

Full Text Available Spinal metastases compressing the spinal cord are a medical emergency and should be operated on if possible; however, patients’ medical condition is often poor and surgical complications are common. Minimizing surgical extant, operative time, and blood loss can potentially reduce postoperative complications. This is a retrospective study describing the patients operated on in our department utilizing a minimally invasive surgery (MIS approach to decompress and instrument the spine from November 2013 to November 2014. Five patients were operated on for thoracic or lumbar metastases. In all cases a unilateral decompression with expandable tubular retractor was followed by instrumentation of one level above and below the index level and additional screw at the index level contralateral to the decompression side. Cannulated fenestrated screws were used (Longitude FNS and cement was injected to increase pullout resistance. Mean operative time was 134 minutes and estimated blood loss was minimal in all cases. Improvement was noticeable in neurological status, function, and pain scores. No complications were observed. Technological improvements in spinal instruments facilitate shorter and safer surgeries in oncologic patient population and thus reduce the complication rate. These technologies improve patients’ quality of life and enable the treatment of patients with comorbidities.

Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards

Energy Technology Data Exchange (ETDEWEB)

Still, Dean K [Aprovecho Research Center, Cottage Grove, OR (United States); Hatfield, Micheal S [Aprovecho Research Center, Cottage Grove, OR (United States)

2015-12-15

Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards. Protecting public health has become a major motivation for investigating how improved cook stoves might function as a viable intervention. Currently, the great majority of cookstoves for sale in the developing world were not designed for this purpose but instead success was based on criteria such as reduced fuel use, affordability, and ease of use. With DOE funding Aprovecho Research Center spent three years creating stoves using an iterative development and modeling approach resulting in four stoves that in lab tests met the World Health Organization (2014) intermediate rate vented targets for PM2.5 and for CO.

Technology for reducing aircraft engine pollution

Science.gov (United States)

Rudey, R. A.; Kempke, E. E., Jr.

1975-01-01

Programs have been initiated by NASA to develop and demonstrate advanced technology for reducing aircraft gas turbine and piston engine pollutant emissions. These programs encompass engines currently in use for a wide variety of aircraft from widebody-jets to general aviation. Emission goals for these programs are consistent with the established EPA standards. Full-scale engine demonstrations of the most promising pollutant reduction techniques are planned within the next three years. Preliminary tests of advanced technology gas turbine engine combustors indicate that significant reductions in all major pollutant emissions should be attainable in present generation aircraft engines without adverse effects on fuel consumption. Fundamental-type programs are yielding results which indicate that future generation gas turbine aircraft engines may be able to utilize extremely low pollutant emission combustion systems.

Adoption of improved oil palm processing technology in Umuahia ...

African Journals Online (AJOL)

It was found that a large percentage of the respondents were aware of the 5 improved oil palm processing technologies with friends and relatives as major source of information. Adoption was significant for 3 out of 5 technologies under study. The major constraints to improved oil palm processing technologies were high ...

Food irradiation - a viable technology for reducing postharvest losses of food

International Nuclear Information System (INIS)

Loaharanu, P.

1985-01-01

Research and development in the past 30 years have clearly demonstrated that food irradiation is a safe, effective and environmentally clean process of food preservation. Twenty-seven countries have approved over 40 irradiated foods or groups of related food items for human consumption, either on an unconditional or a restricted basis. The technology is beginning to play an important role in reducing post-harvest losses of food and in facilitating wider distribution of food in the trade. Its wide application in solving microbial spoilage losses of food, insect disinfestation, improving hygienic qualities, slowing down physiological processes of foods is reviewed. Special emphasis is placed on applications of direct relevance to countries in Asia and the Pacific region

Reducing security risk using data loss prevention technology.

Science.gov (United States)

Beeskow, John

2015-11-01

Data loss/leakage protection (DLP) technology seeks to improve data security by answering three fundamental questions: > Where are confidential data stored? > Who is accessing the information? > How are data being handled?

Hybrid breeding in wheat: technologies to improve hybrid wheat seed production.

Science.gov (United States)

Whitford, Ryan; Fleury, Delphine; Reif, Jochen C; Garcia, Melissa; Okada, Takashi; Korzun, Viktor; Langridge, Peter

2013-12-01

Global food security demands the development and delivery of new technologies to increase and secure cereal production on finite arable land without increasing water and fertilizer use. There are several options for boosting wheat yields, but most offer only small yield increases. Wheat is an inbred plant, and hybrids hold the potential to deliver a major lift in yield and will open a wide range of new breeding opportunities. A series of technological advances are needed as a base for hybrid wheat programmes. These start with major changes in floral development and architecture to separate the sexes and force outcrossing. Male sterility provides the best method to block self-fertilization, and modifying the flower structure will enhance pollen access. The recent explosion in genomic resources and technologies provides new opportunities to overcome these limitations. This review outlines the problems with existing hybrid wheat breeding systems and explores molecular-based technologies that could improve the hybrid production system to reduce hybrid seed production costs, a prerequisite for a commercial hybrid wheat system.

PV Cz silicon manufacturing technology improvements

Science.gov (United States)

Jester, T.

1995-09-01

This describes work done in the final phase of a 3-y, 3-phase contract to demonstrate cost reductions and improvements in manufacturing technology. The work focused on near-term projects in the SSI (Siemens Solar Industries) Czochralski (Cz) manufacturing facility in Camarillo, CA; the final phase was concentrated in areas of crystal growth, wafer technology, and environmental, safety, and health issues. During this period: (1) The crystal-growing operation improved with increased growth capacity; (2) Wafer processing with wire saws continued to progress; the wire saws yielded almost 50 percent more wafers per inch in production. The wire saws needs less etching, too; (3) Cell processing improvements focused on better handling and higher mechanical yield. The cell electrical distribution improved with a smaller standard deviation in the distribution; and (4) Module designs for lower material and labor costs continued, with focus on a new junction box, larger modules with larger cells, and less costly framing techniques. Two modules demonstrating these cost reductions were delivered during this phase.

The impact of European legislative and technology measures to reduce air pollutants on air quality, human health and climate

International Nuclear Information System (INIS)

Turnock, S T; Butt, E W; Richardson, T B; Mann, G W; Reddington, C L; Forster, P M; Carslaw, K S; Spracklen, D V; Haywood, J; Johnson, C E; Crippa, M; Janssens-Maenhout, G; Bellouin, N

2016-01-01

European air quality legislation has reduced emissions of air pollutants across Europe since the 1970s, affecting air quality, human health and regional climate. We used a coupled composition-climate model to simulate the impacts of European air quality legislation and technology measures implemented between 1970 and 2010. We contrast simulations using two emission scenarios; one with actual emissions in 2010 and the other with emissions that would have occurred in 2010 in the absence of technological improvements and end-of-pipe treatment measures in the energy, industrial and road transport sectors. European emissions of sulphur dioxide, black carbon (BC) and organic carbon in 2010 are 53%, 59% and 32% lower respectively compared to emissions that would have occurred in 2010 in the absence of legislative and technology measures. These emission reductions decreased simulated European annual mean concentrations of fine particulate matter (PM 2.5 ) by 35%, sulphate by 44%, BC by 56% and particulate organic matter by 23%. The reduction in PM 2.5 concentrations is calculated to have prevented 80 000 (37 000–116 000, at 95% confidence intervals) premature deaths annually across the European Union, resulting in a perceived financial benefit to society of US$232 billion annually (1.4% of 2010 EU GDP). The reduction in aerosol concentrations due to legislative and technology measures caused a positive change in the aerosol radiative effect at the top of atmosphere, reduced atmospheric absorption and also increased the amount of solar radiation incident at the surface over Europe. We used an energy budget approximation to estimate that these changes in the radiative balance have increased European annual mean surface temperatures and precipitation by 0.45 ± 0.11 °C and by 13 ± 0.8 mm yr −1 respectively. Our results show that the implementation of European legislation and technological improvements to reduce the emission of air pollutants has improved air quality

Reducing multiple births in assisted reproduction technology.

Science.gov (United States)

Bhattacharya, Siladitya; Kamath, Mohan S

2014-02-01

Multiple pregnancy, a complication of assisted reproduction technology, is associated with poorer maternal and perinatal outcomes. The primary reason behind this is the strategy of replacing more than one embryo during an assisted reproduction technology cycle to maximise pregnancy rates. The solution to this problem is to reduce the number of embryos transferred during in-vitro fertilisation. The transition from triple- to double-embryo transfer, which decreased the risk of triplets without compromising pregnancy rates, was easily implemented. The adoption of a single embryo transfer policy has been slow because of concerns about impaired pregnancy rates in a fresh assisted reproduction technology cycle. Widespread availability of effective cryopreservation programmes means that elective single embryo transfer, along with subsequent frozen embryo transfers, could provide a way forward. Any such strategy will need to consider couples' preferences and existing funding policies, both of which have a profound influence on decision making around embryo transfer. Copyright © 2013 Elsevier Ltd. All rights reserved.

Improving water management practices to reduce nutrient export from rice paddy fields.

Science.gov (United States)

Zhang, Zhi-Jian; Yao, Ju-Xiang; Wang, Zhao-De; Xu, Xin; Lin, Xian-Yong; Czapar, George F; Zhang, Jian-Ying

2011-01-01

Nitrogen (N) and phosphorus (P) loss from rice paddy fields represents a significant threat to water quality in China. In this project, three irrigation-drainage regimes were compared, including one conventional irrigation-drainage regime, i.e. continuous submergence regime (CSR), and two improved regimes, i.e. the alternating submergence-nonsubmergence regime (ASNR) and the zero-drainage irrigation technology (ZDIT), to seek cost-effective practices for reducing nutrient loss. The data from these comparisons showed that, excluding the nutrient input from irrigation, the net exports of total N and total P via surface field drainage ranged from -3.93 to 2.39 kg ha and 0.17 to 0.95 g ha(-1) under the CSR operation, respectively, while N loss was -2.46 to -2.23 kg ha(-1) and P export was -0.65 to 0.31 kg ha(-1) under the improved regimes. The intensity of P export was positively correlated to the rate of P application. Reducing the draining frequency or postponing the draining operation would shift the ecological role of the paddy field from a nutrient export source to an interception sink when ASNR or the zero-drainage water management was used. In addition, since the rice yields are being guaranteed at no additional cost, the improved irrigation-drainage operations would have economic as well as environmental benefits.

Technology and equipment to improve reliability of pipeline transport

Science.gov (United States)

Suleimanov, D. F.; Shulayev, N. S.; Bondar, K. E.; Laponov, S. V.; Uzinger, A. A.

2017-10-01

The article is dedicated to development of technology and hardware design of method pipeline transport reliability improving by improving the isolated coating properties modified by microwave radiation. The article describes the technology of the modification process of the coating and instrumentation production, which allows improving operational properties not only in stationary conditions in the manufacture of the insulation coating, but also during its replacement in the field.

Improvements in SPECT technology for cerebral imaging

International Nuclear Information System (INIS)

Esser, P.D.

1985-01-01

Advancement in three major areas of SPECT (single photon emission computed tomography) technology have resulted in improved image quality for cerebral studies. In the first area, single-crystal camera electronics, extensive use of microprocessors, custom digital circuitry, an data bus architecture have allowed precise external control of all gantry motions and improved signal processing. The new digital circuitry permits energy, uniformity, and linearity corrections to be an integral part of the processing electronics. Calibration of these correlations is controlled by algorithms stored in the camera's memory. The second area of improved SPECT technology is camera collimation and related imaging techniques. In this area, system resolution has been improved without loss of sensitivity by decreasing the air gap between patient and collimator surface. Since cerebral studies characteristically image high-contrast regions less than 1 cm in size, image quality has been improved by increasing collimator resolution even at the expense of sensitivity. Increased resolution also improved image contrast for studies using 123 I-labeled pharmaceuticals with 3% to 4% 124 I contamination. 65 references

Technology adoption analysis of improved maize technology in western hills of Nepal

Directory of Open Access Journals (Sweden)

Jeevan Lamichhane

2015-12-01

Full Text Available The survey was carried out in two districts namely Palpa and Baglung to determine the current level of adoption of improved maize production practices. This study identifies the technology adoption extent and pattern of improved maize technologies in Western Hills of Nepal. In each of these districts, two village development committees (V.D.Cs were surveyed. Deurali and Khasyouli V.D.C from Palpa and Kudule and Malika V.D.C from Baglung Districts were selected. Structured Questionnaire were administered to 30 randomly selected households in each VDC. Altogether 120 Households were surveyed. The degree of adoption was measured on the seed rate, adoption of improved varieties, application of Nitrogenous, Phosphatic and Potassium fertilizer, Weeding and method of planting. The adoption index was used to determine the adoption level of the respondents. There seems to be a gap between the recommended practice and current level of practice at the farmers level in some of the factors like Nitrogenous, Phosphorus and Potassium fertilizers, method of planting .The study revealed that majority farmers belonged to high adoption category (57% followed by medium adoption category (54% and low adoption category (9%. The Technology Adoption Index (TAI was found 63%. In nutshell there is still large scope for yield improvement of the maize in the study area by adopting improved maize varieties.

The French approach for management of depleted uranium a constantly improved technology

International Nuclear Information System (INIS)

Hartmann, D.; Le Motais, B.; Duperret, B.

2001-01-01

COGEMA provides uranium enrichment services to the nuclear industry worldwide. To meet general French safety requirements related to environmental protection issues, COGEMA has developed, as an extension of the enrichment operation, a facility to convert DUF 6 into a stable, fluorine-free compound. After 5 years demonstration of the process on a pilot plant, COGEMA placed a facility in industrial operation in 1984 to convert DUF 6 into stable oxide U 3 O 8 ; a second facility was commissioned in 1993, doubling the capacity. Since the beginning of its industrial de-fluorination operations, COGEMA has ever been concerned to make its technology as reliable and as cost effective as possible. Accordingly, an improvement work has been constantly under way which already benefited to the construction of the second facility, completed in 1993. This paper will give an overview of the improvement work performed over the years, relating not only to the technology (optimizing the de-fluorination output, reducing the corrosion inside the kilns, improving the uranium oxide powder compaction factor,...), but also to the process itself (hydrodynamic modeling of the process reactions inside the kiln) and maintenance issues (systematic monitoring of filters plugging, recycling of cartridge filters,...). (authors)

Can Energy Structure Optimization, Industrial Structure Changes, Technological Improvements, and Central and Local Governance Effectively Reduce Atmospheric Pollution in the Beijing–Tianjin–Hebei Area in China?

Directory of Open Access Journals (Sweden)

Xinxuan Cheng

2018-02-01

Full Text Available Economic growth in the Beijing–Tianjin–Hebei region has been achieved by consuming large amounts of fossil fuels. This produces a large number of pollutants, which damage the physical and mental health of residents, and prevent sustainable economic development. The most urgent task at present is improving the quality of the environment. This paper takes carbon emission as a pollution index, and adopts an extended stochastic impacts by regression on population, affluence, and technology (STIRPAT model in order to study the impact of the optimization of industry structure (in particular the reduction of the proportion of energy-intensive secondary industry, the optimization of the energy structure, and technological improvements on the atmospheric environmental quality. We obtain some important and enlightening discoveries. First of all, the rapid economic growth that has been based on magnanimous fossil fuel consumption is still the main reason for the deterioration of the atmospheric environment. This means that the main driving force of economic growth still comes from high pollution industries, despite a strategy for the transformation of the pattern of economic growth having been proposed for many years. Second, the optimization of the industrial structure has not played a significant role in promoting the reduction of carbon emissions. Through further research, we believe that this may be due to the low-quality development of the third industry. In other words, the traditional service industry related to high energy consumption accounts for a large proportion in regional total output, while the high-end service industry related to small pollution accounts for a relatively small proportion. Third, reducing the consumption of coal and improving the technological level can effectively curb the deterioration of the environmental quality. In addition, we find that transboundary pollution is an important factor affecting the environment in

Reasons for adopting technological innovations reducing physical workload in bricklaying.

Science.gov (United States)

de Jong, A M; Vink, P; de Kroon, J C A

2003-09-15

In this paper the adoption of technological innovations to improve the work of bricklayers and bricklayers' assistants is evaluated. Two studies were performed among 323 subjects to determine the adoption of the working methods, the perceived workload, experiences with the working methods, and the reasons for adopting the working methods. Furthermore, a comparison of the results of the studies was made with those of two similar studies in the literature. The results show that more than half of the sector adopted the innovations. The perceived workload was reduced. The employees and employers are satisfied with the working methods and important reasons for adoption were cost/benefit advantages, improvement of work and health, and increase in productivity. Problems preventing the adoption were the use of the working methods at specific sites, for instance in renovation work. The adoption of the new working methods could perhaps have been higher or faster if more attention had been paid to the active participation of bricklayers and bricklayers' assistants during the development of the new working methods and to the use of modern media techniques, such as the Internet and CD/DVD.

Food irradiation - a viable technology for reducing post harvest losses of food

International Nuclear Information System (INIS)

Loaharanu, O.

1985-01-01

Research and development in the past 30 years have clearly demonstrated that food irradiation is a safe, effective and environmentally clean process of food preservation. Twenty-seven countries have approved over 40 irradiated foods or groups of related food items for human consumption, either on an unconditional or a restricted basis. The technology is beginning to play an important role in reducing post-harvest losses of food in facilitating wider distribution of food in the trade. Its wide application in solving microbial spoilage loss of food, insect disinfestation, improving hygenic qualities, slowing down physiological processes of foods is reviewed. Special emphasis is placed on applications of direct relevance to countries in Asia and the Pacific region. (author)

Reducing the Digital Divide: Connecting Older Adults to iPad Technology.

Science.gov (United States)

Delello, Julie A; McWhorter, Rochell R

2017-01-01

America's older adult population is increasing at a dramatic rate due to better health care, technology, and improved living conditions. However, as individuals 65 years and older begin to live longer and experience multiple life changes, there is a larger incidence of social isolation leading to loneliness, depression, and a general decline in health. This mixed-method study aimed to explore whether information and communication technologies, specifically iPads, improved the lives of older adults. Our findings suggest that the use of technology increased knowledge, elicited closer family ties, and led to a greater overall connection to society. © The Author(s) 2015.

Adoption Of Improved Fish Technologies Among Fish Farmers In ...

African Journals Online (AJOL)

A shortfall exists between fish supply and fish demand in the country despite the introduction of improved technology to fish farmers. This led to huge wage bill on the importation of fish to meet the protein need of the ever increasing population. This prompted this study with focus on adoption of improved fish technologies ...

The benefits of improved technologies in agricultural aviation

Science.gov (United States)

Lietzke, K.; Abram, P.; Braen, C.; Givens, S.; Hazelrigg, G. A., Jr.; Fish, R.; Clyne, F.; Sand, F.

1977-01-01

The results are present for a study of the economic benefits attributed to a variety of potential technological improvements in agricultural aviation. Part 1 gives a general description of the ag-air industry and discusses the information used in the data base to estimate the potential benefits from technological improvements. Part 2 presents the benefit estimates and provides a quantitative basis for the estimates in each area study. Part 3 is a bibliography of references relating to this study.

Assessing the Expected Value of Research Studies in Reducing Uncertainty and Improving Implementation Dynamics.

Science.gov (United States)

Grimm, Sabine E; Dixon, Simon; Stevens, John W

2017-07-01

With low implementation of cost-effective health technologies being a problem in many health systems, it is worth considering the potential effects of research on implementation at the time of health technology assessment. Meaningful and realistic implementation estimates must be of dynamic nature. To extend existing methods for assessing the value of research studies in terms of both reduction of uncertainty and improvement in implementation by considering diffusion based on expert beliefs with and without further research conditional on the strength of evidence. We use expected value of sample information and expected value of specific implementation measure concepts accounting for the effects of specific research studies on implementation and the reduction of uncertainty. Diffusion theory and elicitation of expert beliefs about the shape of diffusion curves inform implementation dynamics. We illustrate use of the resulting dynamic expected value of research in a preterm birth screening technology and results are compared with those from a static analysis. Allowing for diffusion based on expert beliefs had a significant impact on the expected value of research in the case study, suggesting that mistakes are made where static implementation levels are assumed. Incorporating the effects of research on implementation resulted in an increase in the expected value of research compared to the expected value of sample information alone. Assessing the expected value of research in reducing uncertainty and improving implementation dynamics has the potential to complement currently used analyses in health technology assessments, especially in recommendations for further research. The combination of expected value of research, diffusion theory, and elicitation described in this article is an important addition to the existing methods of health technology assessment.

Improving AR tracking and registration with markerless technology

OpenAIRE

Shi, Lei

2017-01-01

This study is performed with two mai n goals in mind. The first goal is to understand the Augmented Reality technology and its mainly tracking and registration technology , the second one is find a way to improve the registration and tracking accuracy . T he project is graphic digital compass designed for android devices based on these mainly technology . It can obtain t...

Converging Technologies for Improving Human Performance: Integrating From the Nanoscale

International Nuclear Information System (INIS)

Roco, M.C.; Bainbridge, W.S.

2002-01-01

In the early decades of the twenty-first century, concentrated efforts can unify science based on the unity of nature, thereby advancing the combination of nanotechnology, biotechnology, information technology, and new humane technologies based in cognitive science. Converging technologies integrated from the nanoscale could determine a tremendous improvement in human abilities and societal outcomes. This is a broad, cross cutting, emerging, and timely opportunity of interest to individuals, society, and humanity in the long term.About eighty scientific leaders, industry experts, and policy makers across a range of fields have contributed to develop a vision for the potential to improve human physical, mental, and social capabilities through the convergence of the four technologies. Six major themes have emerged: (a) The broad potential of converging technologies; (b) Expanding human cognition and communication; (c) Improving human health and physical capabilities; (d) Enhancing group and societal outcomes; (e) National security, and (f) Unifying science and education. This article summarizes the observations, conclusions, and recommendations made in the report (Roco and Bainbridge, eds., 2002. Converging Technologies for Improving Human Performance, NSF-DOC Report, June 2002, Arlington VA, USA)

Mobile technology: streamlining practice and improving care

OpenAIRE

Blake, Holly

2013-01-01

The use of mobile phones in care delivery has the potential to improve the way in which care is delivered. When implemented effectively, mobile technologies can empower patients and enhance communication between patients and their health-care providers. When barriers are recognised and addressed, mobile technologies can change working lives, facilitating rapid access to information and supporting efficiency in practice.

Recent status and improvement of reduced-activation ferritic-martensitic steels for high-temperature service

Energy Technology Data Exchange (ETDEWEB)

Tan, L., E-mail: tanl@ornl.gov [Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Katoh, Y. [Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Tavassoli, A.-A.F.; Henry, J. [DMN/Dir, DEN, CEA Saclay, 91191, Gif-sur-Yvette Cedex (France); Rieth, M. [Karlsruhe Institute of Technology, Karlsruhe, 76021 (Germany); Sakasegawa, H. [National Institutes for Quantum and Radiological Science and Technology, Rokkasho, Aomori, 039-3212 (Japan); Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Tanigawa, H. [National Institutes for Quantum and Radiological Science and Technology, Rokkasho, Aomori, 039-3212 (Japan); Huang, Q. [Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)

2016-10-15

Reduced-activation ferritic-martensitic (RAFM) steels, candidate structural materials for fusion reactors, have achieved technological maturity after about three decades of research and development. The recent status of a few developmental aspects of current RAFM steels, such as aging resistance, plate thickness effects, fracture toughness, and fatigue, is updated in this paper, together with ongoing efforts to develop next-generation RAFM steels for superior high-temperature performance. In addition to thermomechanical treatments, including nonstandard heat treatment, alloy chemistry refinements and modifications have demonstrated some improvements in high-temperature performance. Castable nanostructured alloys (CNAs) were developed by significantly increasing the amount of nanoscale MX (M = V/Ta/Ti, X = C/N) precipitates and reducing coarse M{sub 23}C{sub 6} (M = Cr). Preliminary results showed promising improvement in creep resistance and Charpy impact toughness. Limited low-dose neutron irradiation results for one of the CNAs and China low activation martensitic are presented and compared with data for F82H and Eurofer97 irradiated up to ∼70 displacements per atom at ∼300–325 °C.

Feasibility studies to improve plant availability and reduce total installed cost in IGCC plants

Energy Technology Data Exchange (ETDEWEB)

Sullivan, Kevin [General Electric Company, Houston, TX (United States); Anasti, William [General Electric Company, Houston, TX (United States); Fang, Yichuan [General Electric Company, Houston, TX (United States); Subramanyan, Karthik [General Electric Company, Houston, TX (United States); Leininger, Tom [General Electric Company, Houston, TX (United States); Zemsky, Christine [General Electric Company, Houston, TX (United States)

2015-03-30

The main purpose of this project is to look at technologies and philosophies that would help reduce the costs of an Integrated Gasification Combined Cycle (IGCC) plant, increase its availability or do both. GE’s approach to this problem is to consider options in three different areas: 1) technology evaluations and development; 2) constructability approaches; and 3) design and operation methodologies. Five separate tasks were identified that fall under the three areas: Task 2 – Integrated Operations Philosophy; Task 3 – Slip Forming of IGCC Components; Task 4 – Modularization of IGCC Components; Task 5 – Fouling Removal; and Task 6 – Improved Slag Handling. Overall, this project produced results on many fronts. Some of the ideas could be utilized immediately by those seeking to build an IGCC plant in the near future. These include the considerations from the Integrated Operations Philosophy task and the different construction techniques of Slip Forming and Modularization (especially if the proposed site is in a remote location or has a lack of a skilled workforce). Other results include ideas for promising technologies that require further development and testing to realize their full potential and be available for commercial operation. In both areas GE considers this project to be a success in identifying areas outside the core IGCC plant systems that are ripe for cost reduction and ity improvement opportunities.

NASA Fixed Wing Project Propulsion Research and Technology Development Activities to Reduce Thrust Specific Energy Consumption

Science.gov (United States)

Hathaway, Michael D.; DelRasario, Ruben; Madavan, Nateri K.

2013-01-01

This paper presents an overview of the propulsion research and technology portfolio of NASA Fundamental Aeronautics Program Fixed Wing Project. The research is aimed at significantly reducing the thrust specific fuel/energy consumption of notional advanced fixed wing aircraft (by 60 % relative to a baseline Boeing 737-800 aircraft with CFM56-7B engines) in the 2030-2035 time frame. The research investments described herein are aimed at improving propulsive efficiency through higher bypass ratio fans, improving thermal efficiency through compact high overall pressure ratio gas generators, and exploring the potential benefits of boundary layer ingestion propulsion and hybrid gas-electric propulsion concepts.

Leveraging Technology to Reduce Patient Transaction Costs.

Science.gov (United States)

Edlow, Richard C

2015-01-01

Medical practices are under significant pressure to provide superior customer service in an environment of declining or flat reimbursement. The solution for many practices involves the integration of a variety of third-party technologies that conveniently interface with one's electronic practice management and medical records systems. Typically, the applications allow the practice to reduce the cost of each patient interaction. Drilling down to quantify the cost of each individual patient interaction helps to determine the practicality of implementation.

The Modern Technologies to Reduce Turnover of Company Staff

OpenAIRE

Zaiko Tetiana O.; Poplavska Oksana M.

2017-01-01

The article is aimed at analyzing and substantiating the use in practice of modern technologies to reduce turnover of staff, which do not bear significant financial costs for the company. The authors have proved that non-material measures to reduce staff turnover in companies are becoming predominant nowadays. Among them as the most important are indicated: introduction of flexible schedule (mode) of work, transition to the remote form of employment, and distribution of internal shares, in pa...

Information and technology: Improving food security in Uganda ...

International Development Research Centre (IDRC) Digital Library (Canada)

2014-06-23

Jun 23, 2014 ... Information and technology: Improving food security in Uganda ... knowledge to make decisions about planting, harvesting, and managing livestock, but ... to be effective for minimizing risks and increasing agricultural productivity. ... In time, this network of information – made possible by digital technology ...

The French approach for management of depleted uranium a constantly improved technology

Energy Technology Data Exchange (ETDEWEB)

Hartmann, D; Le Motais, B; Duperret, B [Cogema, 78 - Velizy Villacoublay (France)

2001-07-01

COGEMA provides uranium enrichment services to the nuclear industry worldwide. To meet general French safety requirements related to environmental protection issues, COGEMA has developed, as an extension of the enrichment operation, a facility to convert DUF{sub 6} into a stable, fluorine-free compound. After 5 years demonstration of the process on a pilot plant, COGEMA placed a facility in industrial operation in 1984 to convert DUF{sub 6} into stable oxide U{sub 3}O{sub 8}; a second facility was commissioned in 1993, doubling the capacity. Since the beginning of its industrial de-fluorination operations, COGEMA has ever been concerned to make its technology as reliable and as cost effective as possible. Accordingly, an improvement work has been constantly under way which already benefited to the construction of the second facility, completed in 1993. This paper will give an overview of the improvement work performed over the years, relating not only to the technology (optimizing the de-fluorination output, reducing the corrosion inside the kilns, improving the uranium oxide powder compaction factor,...), but also to the process itself (hydrodynamic modeling of the process reactions inside the kiln) and maintenance issues (systematic monitoring of filters plugging, recycling of cartridge filters,...). (authors)

THE IMPROVEMENT OF LOW-WASTE TECHNOLOGIES OF WORKING BODY OF WATER PREPARATION AT THERMAL AND NUCLEAR POWER PLANTS

Directory of Open Access Journals (Sweden)

K. D. Rymasheuskaya

2017-01-01

Full Text Available In the present work the main directions of water desalination technologies improving have been analyzed. Possible techniques of high-quality treatment of water that enable the reduction of amounts of environmentally hazardous substances to be discharged into the hydrosphere are indicated. The purpose of the work was to improve the ecological efficiency and the effectiveness of water treatment equipment at heat power plants when designing new and the modernizing existing water treatment schemes. In order to achieve this goal the following problems have been solved: the one of analyzing the main directions of the improvement of technologies of working body of water preparation at thermal and nuclear power plants; of analyzing the main directions of reduction of total volume of highly mineralized power plant wastewaters; of developing the technological scheme of recycling of concentrate of membrane installations and regenerants of ionite filters in acid and alkali; of developing the technological scheme of transformation of the sludge in pre-processing waste into valuable commodity products. The results of research can be applied for the design of new and the modernization of existing water treatment installations of thermal and nuclear power plants. It will enable to reduce considerably the use of natural water and the amount of chemicals added as well as the volume of wastewater and the concentration of dissolved solids in it. As a consequence, the negative impact of thermal and nuclear power plants on the hydrosphere will be reduced. 

Reburning technology - a means to reduce NOx emissions

International Nuclear Information System (INIS)

Kremer, H.; Lorra, M.

1999-01-01

Nitrogen oxide emission control technologies can be classified as either combustion modifications to minimize the NO production or post-combustion flue gas treatment to reduce the NO concentration afterwards. The techniques for minimizing NOx Production includes the use of low-NOx burners, overfire air (staged combustion) and boiler combustion optimization. Procedures for flue gas treatment can be subdivided into selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR). The re burning process is a selective non-catalytic technology which is applicable to a wide variety of boilers and can be implemented within a relatively short period of time. The NOx reduction potential of this technique is in the range of 50 % up to 70 %. (author)

Reducing Pesticide Drift

Science.gov (United States)

Provides information about pesticide spray drift, including problems associated with drift, managing risks from drift and the voluntary Drift Reduction Technology program that seeks to reduce spray drift through improved spray equipment design.

Technology improves upper extremity rehabilitation.

Science.gov (United States)

Kowalczewski, Jan; Prochazka, Arthur

2011-01-01

Stroke survivors with hemiparesis and spinal cord injury (SCI) survivors with tetraplegia find it difficult or impossible to perform many activities of daily life. There is growing evidence that intensive exercise therapy, especially when supplemented with functional electrical stimulation (FES), can improve upper extremity function, but delivering the treatment can be costly, particularly after recipients leave rehabilitation facilities. Recently, there has been a growing level of interest among researchers and healthcare policymakers to deliver upper extremity treatments to people in their homes using in-home teletherapy (IHT). The few studies that have been carried out so far have encountered a variety of logistical and technical problems, not least the difficulty of conducting properly controlled and blinded protocols that satisfy the requirements of high-level evidence-based research. In most cases, the equipment and communications technology were not designed for individuals with upper extremity disability. It is clear that exercise therapy combined with interventions such as FES, supervised over the Internet, will soon be adopted worldwide in one form or another. Therefore it is timely that researchers, clinicians, and healthcare planners interested in assessing IHT be aware of the pros and cons of the new technology and the factors involved in designing appropriate studies of it. It is crucial to understand the technical barriers, the role of telesupervisors, the motor improvements that participants can reasonably expect and the process of optimizing IHT-exercise therapy protocols to maximize the benefits of the emerging technology. Copyright © 2011 Elsevier B.V. All rights reserved.

[Improving global access to new vaccines: intellectual property, technology transfer, and regulatory pathways].

Science.gov (United States)

Crager, Sara Eve

2015-01-01

The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers.

Improving global access to new vaccines: intellectual property, technology transfer, and regulatory pathways.

Science.gov (United States)

Crager, Sara Eve

2014-11-01

The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers.

Applying State-of-the-Art Technologies to Reduce Escape Times from Fires Using Environmental Sensing, Improved Occupant Egress Guidance, and Multiple Communication Protocols

National Research Council Canada - National Science Library

Street, Thomas T; Hammond, Mark H; Williams, Frederick W

2009-01-01

...) was tasked with investigating various technology and concepts--such as visual signals and unique audible sounds--that have the potential to improve residential occupant escape in the event of fire...

IMPROVING HOSPITAL LOGISTICS BY RETHINKING TECHNOLOGY ASSESSMENT

DEFF Research Database (Denmark)

Jacobsen, Peter; Jørgensen, Pelle Morten Thomas

2011-01-01

In order to cope with the future challenges of the health care sector, there is an urging need for improving efficiency at hospitals. The study presents a framework enabling health care managers of improving the in-house logistics. The distinctiveness of the framework is the way in which it relates...... technology, logistics, structure and procedures to efficiency. Changing one factor e.g. technology, initiates an iterative loop focusing on change in the related factors in order to obtain the optimal efficiency. The search for an optimal efficient solution is the driving force of the framework...... at a Danish hospital. The framework is tested on the blood sample logistics between the emergency department and laboratory with the goal of enhancing the efficiency of the emergency department....

Heat Pipes Reduce Engine-Exhaust Emissions

Science.gov (United States)

Schultz, D. F.

1986-01-01

Increased fuel vaporization raises engine efficiency. Heat-pipe technology increased efficiency of heat transfer beyond that obtained by metallic conduction. Resulted in both improved engine operation and reduction in fuel consumption. Raw material conservation through reduced dependence on strategic materials also benefit from this type of heat-pipe technology. Applications result in improved engine performance and cleaner environment.

Enhancement technology improves palatability of normal and callipyge lambs.

Science.gov (United States)

Everts, A K R; Wulf, D M; Wheeler, T L; Everts, A J; Weaver, A D; Daniel, J A

2010-12-01

The objective of this research was to determine if BPI Processing Technology (BPT) improved palatability of normal (NN) and callipyge (CN) lamb meat and to determine the mechanism by which palatability was improved. Ten ewe and 10 wether lambs of each phenotype were slaughtered, and carcass traits were assessed by a trained evaluator. The LM was removed at 2 d postmortem. Alternating sides served as controls (CON) or were treated with BPT. Muscles designated BPT were injected to a target 120% by weight with a patented solution containing water, ammonium hydroxide, carbon monoxide, and salt. Muscle pH, cooking loss, Warner-Bratzler shear force (WBS), sarcomere length, cooked moisture retention, and desmin degradation were measured. A trained sensory panel and a take-home consumer panel evaluated LM chops. Callipyge had a heavier BW and HCW, less adjusted fat thickness, reduced yield grades, and greater conformation scores than NN (P cooked moisture retention, smaller WBS values, greater juiciness ratings, less off-flavors, and greater consumer ratings for raw characteristics (like of portion size, like of color, overall like of appearance) and eating characteristics (like of juiciness, like of flavor) than CON (P lamb by increasing cooked moisture retention, improving consumer acceptability of CN to near-normal levels.

Improving Blood Pressure Control Using Smart Technology.

Science.gov (United States)

Ciemins, Elizabeth L; Arora, Anupama; Coombs, Nicholas C; Holloway, Barbara; Mullette, Elizabeth J; Garland, Robin; Walsh Bishop-Green, Shannon; Penso, Jerry; Coon, Patricia J

2018-03-01

The authors sought to determine if wireless oscillometric home blood pressure monitoring (HBPM) that integrates with smartphone technology improves blood pressure (BP) control among patients with new or existing uncontrolled hypertension (HTN). A prospective observational cohort study monitored BP control before and after an educational intervention and introduction to HBPM. Patients in the intervention group were instructed to track their BP using a smartphone device three to seven times per week. Cases were matched to controls at a 1:3 allocation ratio on several clinical characteristics over the same period and received usual care. The proportion of patients with controlled BP was compared between groups at pre- and postintervention, ∼9 months later. Results and Materials: The total study population included 484 patients with mean age 60 years (range 23-102 years), 47.7% female, and 84.6% Caucasian. Mean preintervention BP was 137.8 mm Hg systolic and 81.4 mm Hg diastolic. Mean BP control rates improved for patients who received HBPM from 42% to 67% compared with matched control patients who improved from 59% to 67% (p technology has the potential to improve HTN management among patients with uncontrolled or newly diagnosed HTN. Technology needs to be easy to use and operate and would work best when integrated into local electronic health record systems. In systems without this capability, medical assistants or other personnel may be trained to facilitate the process. Nurse navigator involvement was instrumental in bridging communication between the patients and provider.

Application and numerical simulation research on biomimetic drag-reducing technology for gas pipelining

Energy Technology Data Exchange (ETDEWEB)

Zhang Deyuan; Luo Yuehao; Chen Huawei [Beihang Univ., Beijing (China). School of Mechanical Engineering and Automation

2011-06-15

For the purpose of increasing the transmission capacity of gas pipelines, the internal coating technology has been vastly put into application, and a remarkable benefit has been achieved so far. However, with the reduction of wall roughness, the small convex parts are all completely submerged in the viscous sublayer, the gas pipeline becomes a 'hydraulic smooth pipe', even by smoothing the coating surface further, it is difficult to reduce wall friction. Therefore, in order to increase the transportation capacity on the basis of internal coating, the new methods and technologies should be researched and investigated, and perhaps, the biomimetic drag-reducing technology is a good approach. In this paper, according to the planning parameters of the second pipeline of the West-to-East gas transmission project, the best drag reducing effect grooves are calculated and designed, and based on the characteristics and properties of internal coating (AW-01 epoxy resin), the Pre-Cured Micro- Rolling Technology (PCMRT) is discussed and presented, the rolling equipment is also designed and analyzed, the rolling process can be easily added on the available production line. Aiming at the field operating parameters of the gas pipeline in China, and the drag-reducing effect of the grooved surface is analyzed and discussed comprehensively. In addition, the economic benefit of adopting the biomimetic drag reduction technology is investigated. (orig.)

Improving early cycle economic evaluation of diagnostic technologies.

Science.gov (United States)

Steuten, Lotte M G; Ramsey, Scott D

2014-08-01

The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to increase the return on investment as well as patient and societal impact. This paper describes examples of 'early cycle economic evaluations' as applied to diagnostic technologies and highlights challenges in its real-time application. It shows that especially in the field of diagnostics, with rapid technological developments and a changing regulatory climate, early cycle economic evaluation can have a guiding role to improve the efficiency of the diagnostics innovation process. In the next five years the attention will move beyond the methodological and analytic challenges of early cycle economic evaluation towards the challenge of effectively applying it to improve diagnostic research and development and patient value. Future work in this area should therefore be 'strong on principles and soft on metrics', that is, the metrics that resonate most clearly with the various decision makers in this field.

Food Supplement Reduces Fat, Improves Flavor

Science.gov (United States)

2007-01-01

Diversified Services Corporation, seeking to develop a new nutritional fat replacement and flavor enhancement product, took advantage of the NASA Glenn Garrett Morgan Commercialization Initiative (GMCI) for technology acquisition and development and introductions to potential customers and strategic partners. Having developed and commercialized the product, named Nurtigras, the company is now marketing it through its subsidiary, H.F. Food Technologies Inc. The Nutrigras fat substitute is available in liquid, gel, or dry form and can be easily customized to the specific needs of the food manufacturer. It is primarily intended for use as a partial replacement for animal fat in beef patties and other normally high-fat meat products, and can also be used in soups, sauces, bakery items, and desserts. In addition to the nutritional benefits, the fat replacement costs less than the food it replaces, and as such can help manufacturers reduce material costs. In precooked products, Nutrigras can increase moisture content and thereby increase product yield. The company has been able to repay the help provided by NASA by contributing to the Space Agency's astronaut diet-the Nutrigras fat substitute can be used as a flavor enhancer and shelf-life extender for food on the ISS.

Impact of improved technology on industrial greenhouse-gas emissions in developing countries. Phase 1

International Nuclear Information System (INIS)

1997-06-01

In response to a formal request by the Group of 77 and China, the United Nations Industrial Development Organization (UNIDO) initiated a study to identify opportunities to reduce the emissions of greenhouse gases from energy-intensive industries in developing countries. These sectors currently include iron and steel, petroleum refining, cement, paper and pulp and nitrogen fertilizers. The aim of this first phase was to describe: how energy is used in the energy-intensive industries in developing countries today; what current trends indicate for the future; the potential contribution of improved technologies and practices to moving toward more sustainable industrial production in developing countries, and to provide developing countries with an analytical tool for evaluating opportunities to limit industrial greenhouse-gas (GHG) emissions in their industrial sectors through the transfer of improved technologies and processes. The immediate objectives of Phase 1 were twofold: to provide information to developing countries in the form of an inventory of energy-efficient, best-available technologies and processes that can be used to abate greenhouse-gas emissions in the most energy-intensive industrial sub-sectors as well as cross-cutting measures applicable in a range of sub-sectors, and; to provide an analytical methodology in the form of a software tool that enables the user to evaluate and compare the costs, energy requirements, and greenhouse-gas emissions associated with scenarios of specific technology and process options. To meet these objectives, the first phase of the study comprised: a Report entitled Industrial Greenhouse-gas Emissions from Developing Countries; a Software Package containing, an Industrial Technology Inventory, and an Analysis Tool, and; Industry/country-specific Case Studies. The Report describes current energy use and greenhouse-gas emissions in energy-intensive industries in developing countries, and similar industries exemplifying good

SureCure{sup (R)}-A new material to reduces curing time and improve curing reproducibility of lead-acid batteries

Energy Technology Data Exchange (ETDEWEB)

Boden, David P.; Loosemore, Daniel V.; Botts, G. Dean [Hammond Lead Products Division, Hammond Group Inc., 2323 165th Street, Hammond, IN 46320 (United States)

2006-08-25

This paper introduces a technology that considerably reduces the time to cure the positive plates of lead-acid batteries. In each of several full-scale trials at automotive and industrial battery manufacturers, the simple replacement of 1wt.% of leady oxide with finely-divided tetrabasic lead sulfate (SureCure(TM) by Hammond Group Inc.) is shown to accelerate significantly the conversion of tribasic lead sulfate (3BS) to tetrabasic lead sulfate (4BS) in the curing process while improving crystal structure and reproducibility. Shorter curing times result in reduced labour and energy costs, as well as reduced fixed (curing chambers and plant footprint) and working (plate inventory) capital investment. (author)

Augmenting the impact of technology adoption with financial incentive to improve radiology report signature times.

Science.gov (United States)

Andriole, Katherine P; Prevedello, Luciano M; Dufault, Allen; Pezeshk, Parham; Bransfield, Robert; Hanson, Richard; Doubilet, Peter M; Seltzer, Steven E; Khorasani, Ramin

2010-03-01

Radiology report signature time (ST) can be a substantial component of total report turnaround time. Poor turnaround time resulting from lengthy ST can adversely affect patient care. The combination of technology adoption with financial incentive was evaluated to determine if ST improvement can be augmented and sustained. This prospective study was performed at a 751-bed, urban, tertiary care adult teaching hospital. Test-site imaging volume approximated 48,000 examinations per month. The radiology department has 100 trainees and 124 attending radiologists serving multiple institutions. Over a study period of 4 years and 4 months, three interventions focused on radiologist signature performance were implemented: 1) a notification paging application that alerted radiologists when reports were ready for signature, 2) a picture archiving and communications systems (PACS)-integrated speech recognition report generation system, and 3) a departmental financial incentive to reward radiologists semiannually for ST performance. Signature time was compared before and after the interventions. Wilcoxon and linear regression statistical analyses were used to assess the significance of trends. Technology adoption (paging plus speech recognition) reduced median ST from >5 to 24 to 15 to 18 hours (P financial incentive further improved 80th-percentile ST to 4 to 8 hours (P Technology interventions coupled with financial incentive can result in synergistic and sustainable improvement in radiologist report-signing behavior. The addition of a financial incentive leads to better performance than that achievable through technology alone.

Research on technology environment improvement of related industries based on internet governance

Science.gov (United States)

Zhang, Jing; Guan, Zhongliang

2017-08-01

The technology of Internet is an important factor of industry’s development. Constructing a good technical environment is the foundation of the Internet and related industries’ development. This paper demonstrates the necessity of the construction and improvement of the Internet and the related industries technology environment through comparing the current situation of the related industries. It also points out that China needs to improve the environment of the Internet technology urgently. The paper establishes the technology demand pattern of different related industries, and explores strategies of the different Internet technology environment’s construction and perfection according to the different demand of the strong related Internet and the weak related Internet to the industries environment. This paper analyzes the factors that threaten the security of the Internet, and fully demonstrates the methods and tactics of establishing and improving the technology environment Internet hardware, the Internet and related industries in China under the basis of the framework of comprehensive management of Internet. This paper also studies the construction and improvement of the comprehensive management technology environment based on the Internet industry in China.

Reducing Plug Loads in Office Spaces: Hawaii and Guam Energy Improvement Technology Demonstration Project

Energy Technology Data Exchange (ETDEWEB)

Sheppy, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Metzger, I. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cutler, D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Holland, G. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hanada, A. [Naval Facilities Engineering Command, Washington, DC (United States)

2014-01-01

As part of its overall strategy to meet its energy goals, the Naval Facilities Engineering Command (NAVFAC) partnered with the Department of Energy's National Renewable Energy Laboratory (NREL) to rapidly demonstrate and deploy cost-effective renewable energy and energy efficiency technologies. This project was one of several demonstrations of new or underutilized commercial energy technologies. The common goal was to demonstrate and measure the performance and economic benefit of the system while monitoring any ancillary impacts to related standards of service and operation and maintenance (O&M) practices. In short, demonstrations at naval facilities simultaneously evaluate the benefits and compatibility of the technology with the U.S. Department of Defense (DOD) mission, and with NAVFAC's design, construction, operations, and maintenance practices, in particular. This project demonstrated the performance of commercially available advanced power strips (APSs) for plug load energy reductions in building A4 at Joint Base Pearl Harbor-Hickam (JBPHH), Hawaii.

Valuing patents on cost-reducing technology: A case study

NARCIS (Netherlands)

van Triest, S.P.; van de Vis, Wim

2007-01-01

We present an approach for valuing patents on production process improvements. Specifically, we focus on valuing a patent on cost-reducing process improvements from the viewpoint of the patent holding firm. We do this by considering the relevant cash flows that result from owning the patent. The

Improvement and utilization of irradiation capsule technology in HANARO

International Nuclear Information System (INIS)

Choo, Kee-Nam; Cho, Man-Soon; Kim, Bong-Goo; Lee, Cheol-Yong; Yang, Sung-Woo; Shin, Yoon-Taek; Park, Seng-Jae; Jung, Hoan-Sung

2012-01-01

Several improvements of irradiation capsule technology regarding irradiation test parameters, such as temperature and neutron flux/fluence, and regarding instrumentation have progressed at HANARO since the last KAERI-JAERI joint seminar held in 2008. The standard HANARO capsule technology that was developed for use in a commercial power plant temperature of about 300degC was improved to apply to a temperature range of 100-1000degC for the irradiation test of materials of new research reactors and future nuclear systems. Low-flux and long-term irradiation technologies have been developed at HANARO. As a beginning step of the localization of capsule instrumentation technology, the irradiation performance of a domestically produced thermocouple and LVDT will be examined at HANARO. The accuracy of an evaluation of neutron fluence and precise welding technology are also being examined at HANARO. Based on these accumulated capsule technologies, a HANARO irradiation capsule system is being actively utilized for the national R and D programme on commercial nuclear reactors and nuclear fuel cycle technology in Korea. HANARO has recently started the irradiation support of R and D relevant to future nuclear systems including SMART, VHTR, and SFR, and HANARO is preparing new support relevant to new research and Fusion reactors. (author)

ACR-700 advanced technologies

International Nuclear Information System (INIS)

Tapping, R.L.; Turner, C.W.; Yu, S.K.W.; Olmstead, R.; Speranzini, R.A.

2004-01-01

A successful advanced reactor plant will have optimized economics including reduced operating and maintenance costs, improved performance, and enhanced safety. Incorporating improvements based on advanced technologies ensures cost, safety and operational competitiveness of the ACR-700. These advanced technologies include modern configuration management; construction technologies; operational technology for the control centre and information systems for plant monitoring and analysis. This paper summarizes the advanced technologies used to achieve construction and operational improvements to enhance plant economic competitiveness, advances in the operational technology used for reactor control, and presents the development of the Smart CANDU suite of tools and its application to existing operating reactors and to the ACR-700. (author)

Radiation technology of improved quality materials production

International Nuclear Information System (INIS)

Zajkin, Yu.A.; Nadirov, N.K.; Zajkina, R.F.

1997-01-01

The technology of materials production from metals and alloys with high operational properties is developed. The technology is based on use of radiation methods in powder metallurgy. Use of radiation processing allows to improve technological conditions of sintering. It is established, that in certain regimes the sintering temperature is decreasing from 1200 deg C up to 950 deg C in the result of radiation processing of stainless steel powders . According to the processing regimes it is possible load reduction by powder pressing on 15-20 % and sintering time in to 1,5 - 2 times . The radiation methods give possibility to produce high qualitative goods from cheap powder materials without use energy-intensive processes and prolonged processing of finished products

Information Technology: Opportunities for Improving Acquisitions and Operations

Science.gov (United States)

2017-04-01

1GAO, Federal Chief Information Officers : Opportunities Exist to Improve Role in Information Technology Management, GAO-11-634...approach and a collaborative relationship among agency executives (e.g., Chief Financial Officer and agency component leadership) had stopped 45...executives, including Chief Financial Officers and executives of major bureaus and component agencies for whom the technology is serving, to ensure that

Steam Pressure-Reducing Station Safety and Energy Efficiency Improvement Project

Energy Technology Data Exchange (ETDEWEB)

Lower, Mark D [ORNL; Christopher, Timothy W [ORNL; Oland, C Barry [ORNL

2011-06-01

The Facilities and Operations (F&O) Directorate is sponsoring a continuous process improvement (CPI) program. Its purpose is to stimulate, promote, and sustain a culture of improvement throughout all levels of the organization. The CPI program ensures that a scientific and repeatable process exists for improving the delivery of F&O products and services in support of Oak Ridge National Laboratory (ORNL) Management Systems. Strategic objectives of the CPI program include achieving excellence in laboratory operations in the areas of safety, health, and the environment. Identifying and promoting opportunities for achieving the following critical outcomes are important business goals of the CPI program: improved safety performance; process focused on consumer needs; modern and secure campus; flexibility to respond to changing laboratory needs; bench strength for the future; and elimination of legacy issues. The Steam Pressure-Reducing Station (SPRS) Safety and Energy Efficiency Improvement Project, which is under the CPI program, focuses on maintaining and upgrading SPRSs that are part of the ORNL steam distribution network. This steam pipe network transports steam produced at the ORNL steam plant to many buildings in the main campus site. The SPRS Safety and Energy Efficiency Improvement Project promotes excellence in laboratory operations by (1) improving personnel safety, (2) decreasing fuel consumption through improved steam system energy efficiency, and (3) achieving compliance with applicable worker health and safety requirements. The SPRS Safety and Energy Efficiency Improvement Project being performed by F&O is helping ORNL improve both energy efficiency and worker safety by modifying, maintaining, and repairing SPRSs. Since work began in 2006, numerous energy-wasting steam leaks have been eliminated, heat losses from uninsulated steam pipe surfaces have been reduced, and deficient pressure retaining components have been replaced. These improvements helped ORNL

The impact of health information technology on patient safety

Directory of Open Access Journals (Sweden)

Yasser K. Alotaibi

2017-12-01

Full Text Available Since the original Institute of Medicine (IOM report was published there has been an accelerated development and adoption of health information technology with varying degrees of evidence about the impact of health information technology on patient safety. This article is intended to review the current available scientific evidence on the impact of different health information technologies on improving patient safety outcomes. We conclude that health information technology improves patient’s safety by reducing medication errors, reducing adverse drug reactions, and improving compliance to practice guidelines. There should be no doubt that health information technology is an important tool for improving healthcare quality and safety. Healthcare organizations need to be selective in which technology to invest in, as literature shows that some technologies have limited evidence in improving patient safety outcomes.

The impact of health information technology on patient safety.

Science.gov (United States)

Alotaibi, Yasser K; Federico, Frank

2017-12-01

Since the original Institute of Medicine (IOM) report was published there has been an accelerated development and adoption of health information technology with varying degrees of evidence about the impact of health information technology on patient safety.  This article is intended to review the current available scientific evidence on the impact of different health information technologies on improving patient safety outcomes. We conclude that health information technology improves patient's safety by reducing medication errors, reducing adverse drug reactions, and improving compliance to practice guidelines. There should be no doubt that health information technology is an important tool for improving healthcare quality and safety. Healthcare organizations need to be selective in which technology to invest in, as literature shows that some technologies have limited evidence in improving patient safety outcomes.

Improving reservoir performance using new 'smart' well technology

International Nuclear Information System (INIS)

Roggensack, W.D.; Matthews, C.M.

1997-01-01

The technologies that were available in the past to improve reservoir performance include 3-D seismic, coiled tubing, horizontal wells, and PCP's. Future enabling technologies will also include multi-lateral wells, 'smart' wells, underbalanced drilling, and downhole fluids processing. A description of 'smart' well technology was given, defined as well completions which facilitate downhole monitoring and control of production to achieve maximum reserves recovery. The current development for 'smart' wells is focused on offshore and subsea wells for marginal field development and work-over mitigation, with the emphasis in system design for production control of horizontal and multi-lateral wells. Basic 'smart' well configuration, instrumentation and monitoring systems, applications of 'smart' well technology in the Western Canadian Sedimentary Basin, and future developments and applications for the technology in general, were also discussed. 30 figs

Aircraft Engine Technology for Green Aviation to Reduce Fuel Burn

Science.gov (United States)

Hughes, Christopher E.; VanZante, Dale E.; Heidmann, James D.

2013-01-01

The NASA Fundamental Aeronautics Program Subsonic Fixed Wing Project and Integrated Systems Research Program Environmentally Responsible Aviation Project in the Aeronautics Research Mission Directorate are conducting research on advanced aircraft technology to address the environmental goals of reducing fuel burn, noise and NOx emissions for aircraft in 2020 and beyond. Both Projects, in collaborative partnerships with U.S. Industry, Academia, and other Government Agencies, have made significant progress toward reaching the N+2 (2020) and N+3 (beyond 2025) installed fuel burn goals by fundamental aircraft engine technology development, subscale component experimental investigations, full scale integrated systems validation testing, and development validation of state of the art computation design and analysis codes. Specific areas of propulsion technology research are discussed and progress to date.

How wireless remote technology reduces cost, boosts productivity and improves safety in upstream oil and gas operations

Energy Technology Data Exchange (ETDEWEB)

Wommack, K. [Viatran, Edmonton, AB (Canada)

2009-09-15

This article demonstrated how wireless communications can help oil and gas producers obtain the most current information on the status of their operations to help optimize operations and protect workers and equipment. Wireless communication can provide benefits at nearly every phase of upstream production. When combined with pressure, temperature, flow, level and other sensing devices, wireless communications provide an effective and economical way to deliver data on well or pipeline operations to site managers; optimize well-production, minimize workovers and prevent blowdowns at the wellhead; track oil and water production; measure differential pressure, line pressure and line temperature; and monitor the motorized choke and control valve position. Wireless technology offers significant savings through improved maintenance efficiency. With wireless systems in remote locations, there are seldom problems in the transmission path. Wireless technology makes it much easier and affordable to manage well operations from a safe distance. By eliminating the need for wires in a fracing operation, wireless can help fracing companies maintain a safe operating distance from their target wells, and move operations from well to well with ease. A wireless communication system for transmitting process data from field sensors to a field processing device consists of radio transmitters, a communications gateway and a user interface. The communications hub receives encrypted messages from the remote devices and transmits them to a flow computer, SCADA system, or Distributed Control System. Data is then transmitted to a central office. 1 fig.

Main ways and suitable technologies of improving economic benefits for uranium ore heap leaching in China (the end)

International Nuclear Information System (INIS)

Guan Zibin

2001-01-01

Combining with practice of China's uranium ore heap leaching, the author proposes main ways and suitable technologies in the fields of emphasizing feasibility research, adopting strengthened technologies, improving equipment level, optimizing control technological factors and developing application range and so on, which include adopting acid-currying and ferric sulphate-trickle leaching process, bacteria heap leaching, countercurrent heap leaching, selecting advanced material of heap bottom, developing large mechanized heap construction equipment and methods, popularizing drip irrigation distributing solution, optimizing heap leaching process parameters, as well as developing recovery equipment suited to heap leaching, etc, in order to increase leaching rate, reduce heap leaching period and achieve more economic benefits

Securing Land Tenure, Improving Food Security and Reducing ...

International Development Research Centre (IDRC) Digital Library (Canada)

Securing Land Tenure, Improving Food Security and Reducing Poverty in Rural ... land tenure regimes as obstacles to food security, economic integration and ... its 2017 call for proposals to establish Cyber Policy Centres in the Global South.

Mind over Matter: Using Technology to Improve Wellness.

Science.gov (United States)

Pomputius, Ariel F

2018-01-01

Wellness-the balance of mental, emotional, spiritual, and physical health for the overall health benefit of the individual-is a growing concern, particularly for professionals in the medical field. Although wellness is usually viewed in opposition to technology, more digital devices and mobile applications are emerging to support wellness for health consumers. This wellness technology seeks to improve the overall health of the user through increasing calm and decreasing stress. This column will explain what wellness technology is, concerns over its widespread application, examples of wellness devices on the market currently, and an overview of where it is being applied in libraries.

Improving Teacher-Made Assessments in Technology and Engineering Education

Science.gov (United States)

White, Jesse W.; Moye, Johnny J.; Gareis, Christopher R.; Hylton, Sarah P.

2018-01-01

In the interest of learning how to effectively use the technological literacy standards and of adhering to education regulation, this article focuses on efforts to improve the professional teaching practices of Technology and Engineering Education (TEE) teachers by using the Gareis and Grant (2015) process with respect to "Standards for…

Agricultural Technology, Risk, and Gender

DEFF Research Database (Denmark)

Arndt, Channing; Tarp, Finn

2000-01-01

Interactions between agricultural technology improvements, risk-reducing behavior, and gender roles in agricultural production in Mozambique are examined. The analysis employs a computable general equilibrium (CGE) model that explicitly incorporates key features of the economy. These include......: detailed accounting of marketing margins, home consumption, risk, and gender roles in agricultural production. Our results show that agricultural technology improvements benefit both male and female occupants of rural households. Due to economic interactions, agricultural technology improvements...

Identification of technology options for reducing nitrogen pollution in cropping systems of Pujiang*

OpenAIRE

Fang, Bin; Wang, Guang-huo; Van den berg, Marrit; Roetter, Reimund

2005-01-01

This work analyses the potential role of nitrogen pollution technology of crop systems of Pujiang, County in Eastern China’s Zhejiang Province, rice and vegetables are important cropping systems. We used a case study approach involving comparison of farmer practices and improved technologies. This approach allows assessing the impact of technology on pollution, is forward looking, and can yield information on the potential of on-the-shelf technology and provide opportunities for technology de...

Modeling the impact of improved aircraft operations technologies on the environment and airline behavior

Science.gov (United States)

Foley, Ryan Patrick

The overall goal of this thesis is to determine if improved operations technologies are economically viable for US airlines, and to determine the level of environmental benefits available from such technologies. Though these operational changes are being implemented primarily with the reduction of delay and improvement of throughput in mind, economic factors will drive the rate of airline adoption. In addition, the increased awareness of environmental impacts makes these effects an important aspect of decision-making. Understanding this relationship may help policymakers make decisions regarding implementation of these advanced technologies at airports, and help airlines determine appropriate levels of support to provide for these new technologies. In order to do so, the author models the behavior of a large, profit-seeking airline in response to the introduction of advanced equipage allowing improved operations procedures. The airline response included changes in deployed fleet, assignment of aircraft to routes, and acquisition of new aircraft. From these responses, changes in total fleet-level CO2 emissions and airline profit were tallied. As awareness of the environmental impact of aircraft emissions has grown, several agencies (ICAO, NASA) have moved to place goals for emissions reduction. NASA, in particular, has set goals for emissions reduction through several areas of aircraft technology. Among these are "Operational Improvements," technologies available in the short-term through avionics and airport system upgrades. The studies in this thesis make use of the Fleet-Level Environmental Evaluation Tool (FLEET), a simulation tool developed by Purdue University in support of a NASA-sponsored research effort. This tool models the behavior of a large, profit-seeking airline through an allocation problem. The problem is contained within a systems dynamics type approach that allows feedback between passenger demand, ticket price, and the airline fleet composition

Multiplexed lateral flow biosensors: Technological advances for radically improving point-of-care diagnoses.

Science.gov (United States)

Li, Jia; Macdonald, Joanne

2016-09-15

Lateral flow biosensors are a leading technology in point-of-care diagnostics due to their simplicity, rapidness and low cost. Their primacy in this arena continues through technological breakthroughs such as multiplexing: the detection of more than one biomarker in a single assay. Multiplexing capacity is critical for improving diagnostic efficiency, enhancing the diagnostic precision for specific diseases and reducing diagnostic cost. Here we review, for the first time, the various types and strategies employed for creating multiplexed lateral flow biosensors. These are classified into four main categories in terms of specific application or multiplexing level, namely linear, parameter, spatial and conceptual. We describe the practical applications and implications for each approach and compare their advantages and disadvantages. Importantly, multiplexing is still subject to limitations of the traditional lateral flow biosensor, such as sensitivity and specificity. However, by pushing the limitations of the traditional medium into the multiplex arena, several technological breakthroughs are emerging with novel solutions that further expand the utility of lateral flow biosensing for point-of-care applications. Copyright © 2016 Elsevier B.V. All rights reserved.

Efficiency-improving fossil fuel technologies for electricity generation: Data selection and trends

Energy Technology Data Exchange (ETDEWEB)

Lanzi, Elisa [Fondazione Eni Enrico Mattei (Italy); Verdolini, Elena, E-mail: elena.verdolini@feem.it [Fondazione Eni Enrico Mattei (Italy); Universita Cattolica, del Sacro Cuore di Milano (Italy); Hascic, Ivan [OECD Environment Directorate (France)

2011-11-15

This paper studies patenting dynamics in efficiency improving electricity generation technologies as an important indicator of innovation activity. We build a novel database of worldwide patent applications in efficiency-improving fossil fuel technologies for electricity generation and then analyse patenting trends over time and across countries. We find that patenting has mostly been stable over time, with a recent decreasing trend. OECD countries represent the top innovators and the top markets for technology. Some non-OECD countries, and particularly China, are also very active in terms of patenting activity in this sector. The majority of patents are first filed in OECD countries and only then in BRIC and other non-OECD countries. BRIC and other non-OECD countries apply for patents that are mostly marketed domestically, but BRIC countries represent important markets for patent duplication of OECD inventions. These results are indicative of significant technology transfer in the field of efficiency-improving technologies for electricity production. - Highlights: > We study innovation in efficiency-improving electricity generation technologies. > Relevant patents are identified and used as an indicator of innovation. > We show that there is significant technology transfer in this field. > Most patents are first filed in OECD countries and then in non-OECD countries. > Patents in non-OECD countries are mostly marketed domestically.

Improved Laser performance through Planar Waveguide Technology Development

Data.gov (United States)

National Aeronautics and Space Administration — We propose a laser technology development to improve efficiency and performance for a variety of science applications including: Lunar Ice, 2-Step Laser Tandem Mass...

A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles

International Nuclear Information System (INIS)

Shancita, I.; Masjuki, H.H.; Kalam, M.A.; Rizwanul Fattah, I.M.; Rashed, M.M.; Rashedul, H.K.

2014-01-01

Highlights: • Introduce various idling reduction technologies for transport vehicles. • Exhibit their energy use, advantages, disadvantages to understand their capability. • Conduct critical review to improve fuel economy and exhaust emissions. • Suggest better technology according to their performance ability. - Abstract: To achieve reductions in vehicle idling, strategies and actions must be taken to minimize the time spent by drivers idling their engines. A number of benefits can be obtained in limiting the idling time. These benefits include savings in fuel use and maintenance costs, vehicle life extension, and reduction in exhaust emissions. The main objective of idling reduction (IR) devices is to reduce the amount of energy wasted by idling trucks, rail locomotives, and automobiles. During idling, gasoline vehicles emit a minimum amount of nitrogen oxides (NO x ) and negligible particulate matter (PM). However, generally a large amount of carbon monoxide (CO) and hydrocarbons (HC) are produced from these vehicles. Gasoline vehicles consume far more fuel at an hourly rate than their diesel counterparts during idling. Higher NOx and comparatively larger PM are produced by diesel vehicles than gasoline vehicles on the average during idling. Auxiliary power unit (APU), direct-fired heaters, fuel cells, thermal storage system, truck stop electrification, battery-based systems, engine idle management (shutdown) systems, electrical (shore power) solutions, cab comfort system, and hybridization are some of the available IR technologies whose performances for reducing fuel consumption and exhaust emissions have been compared. This paper analyzes the availability and capability of most efficient technologies to reduce fuel consumption and exhaust emissions from diesel and gasoline vehicles by comparing the findings of previous studies. The analysis reveals that among all the options direct fired heaters, APUs and electrified parking spaces exhibit better

Yoga Can Improve Assisted Reproduction Technology Outcomes in Couples With Infertility.

Science.gov (United States)

Darbandi, Sara; Darbandi, Mahsa; Khorram Khorshid, Hamid Reza; Sadeghi, Mohammad Reza

2017-11-07

Context • Depending on the cause of the infertility, nonsurgical or surgical treatments may be used to treat men and women with infertility. Despite improved outcomes due to medical advances, assisted reproductive technology (ART) for couples with infertility is sometimes unsuccessful. Success may be affected by the patient's social, psychological, and physical status. Objective • The study examined the effects of yoga-including asanas (yoga poses), pranayama (proper breathing), shavasana, and meditation-on male and female fertility and ART outcomes. Design • The research team performed a literature review, electronically searching for articles published between January 1978 and January 2016 in the PubMed, Scopus, ScienceDirect, and Google Scholar databases. Setting • The study took place at the Reproductive Biotechnology Research Center at the Avicenna Research Institute at the Academic Center for Education, Culture, and Research (Tehran, Iran). Participants • Participants were couples with infertility taking part in 87 reviewed studies. Intervention • Yoga was the intervention. Outcome Measures • The outcome measures comprised fertility factors in males and females, fertility rate, and ART success rate. Results • The reviewed studies showed that yoga can provide stress management for patients with infertility, with beneficial effects on fertility, helping couples give birth. They found that yoga also could reduce pain; decrease depression, anxiety, and stress; reduce the rate of assisted vaginal delivery; and improve fetal outcomes. Conclusions • Yoga can help couples overcome infertility and increase the ART success rate by improving the physiological and psychological states of both men and women.

Point-of-care technology: integration for improved delivery of care.

Science.gov (United States)

Gregory, Debbie; Buckner, Martha

2014-01-01

The growing complexity of technology, equipment, and devices involved in patient care delivery can be staggering and overwhelming. Technology is intended to be a tool to help clinicians, but it can also be a frustrating hindrance if not thoughtfully planned and strategically aligned. Critical care nurses are key partners in the collaborations needed to improve safety and quality through health information technology (IT). Nurses must advocate for systems that are interoperable and adapted to the context of care experiences. The involvement and collaboration between clinicians, information technology specialists, biomedical engineers, and vendors has never been more relevant and applicable. Working together strategically with a shared vision can effectively provide a seamless clinical workflow, maximize technology investments, and ultimately improve patient care delivery and outcomes. Developing a strategic integrated clinical and IT roadmap is a critical component of today's health care environment. How can technology strategy be aligned from the executive suite to the bedside caregiver? What is the model for using clinical workflows to drive technology adoption? How can the voice of the critical care nurse strengthen this process? How can success be assured from the initial assessment and selection of technology to a sustainable support model? What is the vendor's role as a strategic partner and "co-caregiver"?

Reducing the financial impact of pathogen inactivation technology for platelet components: our experience.

Science.gov (United States)

Girona-Llobera, Enrique; Jimenez-Marco, Teresa; Galmes-Trueba, Ana; Muncunill, Josep; Serret, Carmen; Serra, Neus; Sedeño, Matilde

2014-01-01

Pathogen inactivation (PI) technology for blood components enhances blood safety by inactivating viruses, bacteria, parasites, and white blood cells. Additionally, PI for platelet (PLT) components has the potential to extend PLT storage time from 5 to 7 days. A retrospective analysis was conducted into the percentage of outdated PLT components during the 3 years before and after the adoption of PLT PI technology in our institution. The PLT transfusion dose for both pre-PI and post-PI periods was similar. A retrospective analysis to study clinical safety and component utilization was also performed in the Balearic Islands University Hospital. As a result of PI implementation in our institution, the PLT production cost increased by 85.5%. However, due to the extension of PLT storage time, the percentage of outdated PLT units substantially decreased (-83.9%) and, consequently, the cost associated with outdated units (-69.8%). This decrease represented a 13.7% reduction of the initial cost increase which, together with the saving in blood transportation (0.1%), led to a saving of 13.8% over the initial cost. Therefore, the initial 85.5% increase in the cost of PLT production was markedly reduced to 71.7%. The mean number of PLT concentrates per patient was similar during both periods. The extension of PLT storage time can substantially contribute to reducing the financial impact of PI by decreasing the percentage of outdated PLTs while improving blood safety. Since the adoption of PI, there have been no documented cases of PLT transfusion-related sepsis in our region. © 2013 American Association of Blood Banks.

Attitude of farmers towards improved agricultural technologies in ...

African Journals Online (AJOL)

ajl yemi

2011-09-05

Sep 5, 2011 ... environmental changing situations and technologies should be cost effective and flexible for result oriented ... spectrum pesticides, which actually reduce the number of ... eventually considered fit for Ondo State for logistic reasons. This ... disagreed, for positive statements but reversed for negatively.

Using smartphone technology to reduce health impacts from atmospheric environmental hazards

Science.gov (United States)

Johnston, F. H.; Wheeler, A. J.; Williamson, G. J.; Campbell, S. L.; Jones, P. J.; Koolhof, I. S.; Lucani, C.; Cooling, N. B.; Bowman, D. M. J. S.

2018-04-01

Background: Global environmental change is exacerbating human vulnerability to adverse atmospheric conditions including air pollution, aeroallergens such as pollen, and extreme weather events. Public information and advisories are a central component of responses to mitigate the human impacts of environmental hazards. Digital technologies are emerging as a means of providing personalised, timely and accessible warnings. Method: We describe AirRater, an integrated online platform that combines symptom surveillance, environmental monitoring, and notifications of changing environmental conditions via a free smartphone app. It was developed and launched in Tasmania, Australia (population 510 000), with the aim of reducing health impacts and improving quality of life in people with conditions such as asthma and allergic rhinitis. We present environmental data, user uptake and results from three online evaluation surveys conducted during the first 22 months of operation, from October 2015 through August 2017. Results: There were 3,443 downloads of the app from all regions of Tasmania. Of the 1,959 individuals who registered, 79% reported having either asthma or allergic rhinitis. Downloads increased during adverse environmental conditions and following publicity. Symptom reports per active user were highest during spring (72%), lowest in autumn (37%) and spiked during periods of reduced air quality. In response to online surveys, most users reported that the app was useful and had improved their understanding of how environmental conditions affect their health, and in some cases had prompted action such as the timely use of medication. Conclusion: Active engagement and consistent positive feedback from users demonstrates the potential for considerable individual, clinical and wider public health benefits from integrated and personalised monitoring systems such as AirRater. The perceived health benefits require objective verification, and such systems need to address

Application of improved quality control technology to pressure vessels

International Nuclear Information System (INIS)

Kriedt, F.

1985-01-01

Within the last decade, ASME Boiler and Pressure Vessel Code Section VIII-1 instituted requirements for a formal written quality control system. The results, good and bad, of this requirement are discussed. The effects are far reaching from a national economic standpoint. Quality control technology has improved. These improvements are discussed and compared to existing requirements of the CODE. Recommended improvements are suggested

Healthcare technology: physician collaboration in reducing the surgical cost.

Science.gov (United States)

Olson, Steven A; Obremskey, William T; Bozic, Kevin J

2013-06-01

The increasing cost of providing health care is a national concern. Healthcare spending related to providing hospital care is one of the primary drivers of healthcare spending in the United States. Adoption of advanced medical technologies accounts for the largest percentage of growth in healthcare spending in the United States when compared with other developed countries. Within the specialty of orthopaedic surgery, a variety of implants can result in similar outcomes for patients in several areas of clinical care. However, surgeons often do not know the cost of implants used in a specific procedure or how the use of an implant or technology affects the overall cost of the episode of care. The purposes of this study were (1) to describe physician-led processes for introduction of new surgical products and technologies; and (2) to inform physicians of potential cost savings of physician-led product contract negotiations and approval of new technology. We performed a detailed review of the steps taken by two centers that have implemented surgeon-led programs to demonstrate responsibility in technology acquisition and product procurement decision-making. Each program has developed a physician peer review process in technology and new product acquisition that has resulted in a substantial reduction in spending for the respective hospitals in regard to surgical implants. Implant costs have decreased between 3% and 38% using different negotiating strategies. At the same time, new product requests by physicians have been approved in greater than 90% of instances. Hospitals need physicians to be engaged and informed in discussions concerning current and new technology and products. Surgeons can provide leadership for these efforts to reduce the cost of high-quality care.

The AskIT Service Desk: A Model for Improving Productivity and Reducing Costs

Energy Technology Data Exchange (ETDEWEB)

Ashcraft, Phillip Lynn [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fogle, Blythe G. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cummings, Susan M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lopez, Leon [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-07-29

This was prepared for the business process improvement presentation to the Department of Energy. Los Alamos National Laboratory provides a single point of contact, the AskIT Service Desk, to address issues that impact customer productivity. At the most basic level, what customers want is for their calls to be received, to get a response from a knowledgeable analyst, and to have their issues resolved and their requests fulfilled. Providing a centralized, single point of contact service desk makes initiating technical or business support simple for the customer and improves the odds of immediately resolving the issue or correctly escalating the request to the next support level when necessary. Fulfilling customer requests through automated workflow also improves customer productivity and reduces costs. Finally, customers should be provided the option to solve their own problems through easy access to self-help resources such as frequently asked questions (FAQs) and how-to guides. To accomplish this, everyone who provides and supports services must understand how these processes and functions work together. Service providers and those who support services must “speak the same language” and share common objectives. The Associate Directorate for Business Innovation (ADBI) began the journey to improve services by selecting a known service delivery framework (Information Technology Infrastructure Library, or ITIL). From this framework, components that contribute significant business value were selected.

Why Promote Improved Fallows as a Climate-Smart Agroforestry Technology in Sub-Saharan Africa?

Directory of Open Access Journals (Sweden)

Samuel T. Partey

2017-10-01

Full Text Available In the literature, a lot is discussed about how agroforestry can achieve the mitigation, adaptation and productivity goals of climate-smart agriculture (CSA. However, this may be relatively too broad to assess the trade-offs and synergies of how specific agroforestry technologies or practices achieve the three pillars of CSA. Here, we provide an overview of how improved fallows (an agroforestry technology consisting of planting mainly legume tree/shrub species in rotation with cultivated crops may achieve the goals of climate-smart agriculture in Sub-Saharan Africa (SSA. Our review showed that improved fallow systems have real potential to contribute to food security and climate change mitigation and adaptation in SSA. Under proper management, improved fallows can increase maize yields to about 6 t ha−1, which is comparable to conventional maize yields under fertilization. This is attributed to improved soil fertility and nutrient use efficiency. Although data was generally limited, the growing literature showed that improved fallows increased soil carbon sequestration and reduced greenhouse emissions. Further, as a multiple output land use system, improved fallows may increase fodder availability during dry periods and provide substantial biomass for charcoal production. These livelihood options may become important financial safety nets during off seasons or in the event of crop failures. This notwithstanding, the adoption of improved fallows is mainly in Southern and Eastern Africa, where over 20,000 farmers are now using Sesbania sesban, Tephrosia vogelii, and Cajanus cajan in two-year fallows followed by maize rotations. Land tenure issues, lack of social capital, and improved germplasm and accessions of fallow species have been cited as constraints to scaling up. However, development of seed orchards, nursery development, and the willingness of policy makers to create a policy environment that addresses market failures and alleviates

Combining active chilled beams and air cleaning technologies to improve indoor climate in offices

DEFF Research Database (Denmark)

Ardkapan, Siamak Rahimi; Afshari, Alireza; Bergsøe, Niels Christian

2012-01-01

This project is part of a long-term research programme studying the possibilities of using efficient air cleaning technologies to improve the indoor air quality in buildings. The purpose of this part of the project is to study energy-saving potential by combining cooling and cleaning of air in of....... Furthermore, the measurement results of the combined system showed that adding the filter accelerated the removal rate of the particles by 2 (h-1). However, the efficiency of the chilled beam in exchanging the heat reduced by 38%....

Technology in geriatrics.

Science.gov (United States)

Pilotto, Alberto; Boi, Raffaella; Petermans, Jean

2018-03-13

Recently, the interest of industry, government agencies and healthcare professionals in technology for aging people has increased. The challenge is whether technology may play a role in enhancing independence and quality of life and in reducing individual and societal costs of caring. Information and communication technologies, i.e. tools aimed at communicating and informing, assistive technologies designed to maintain older peoples' independence and increasing safety, and human-computer interaction technologies for supporting older people with motility and cognitive impairments as humanoid robots, exoskeletons, rehabilitation robots, service robots and companion-type are interdisciplinary topics both in research and in clinical practice. The most promising clinical applications of technologies are housing and safety to guarantee older people remaining in their own homes and communities, mobility and rehabilitation to improve mobility and gait and communication and quality of life by reducing isolation, improve management of medications and transportation. Many factors impair a broad use of technology in older age, including psychosocial and ethical issues, costs and fear of losing human interaction. A substantial lack of appropriate clinical trials to establish the clinical role of technologies to improve physical or cognitive performances and/or quality of life of subjects and their caregivers may suggest that the classical biomedical research model may not be the optimal choice to evaluate technologies in older people. In conclusion, successful technology development requires a great effort in interdisciplinary collaboration to integrate technologies into the existing health and social service systems with the aim to fit into the older adults' everyday life.

Efficiency-improving fossil fuel technologies for electricity generation: Data selection and trends

International Nuclear Information System (INIS)

Lanzi, Elisa; Verdolini, Elena; Hascic, Ivan

2011-01-01

This paper studies patenting dynamics in efficiency improving electricity generation technologies as an important indicator of innovation activity. We build a novel database of worldwide patent applications in efficiency-improving fossil fuel technologies for electricity generation and then analyse patenting trends over time and across countries. We find that patenting has mostly been stable over time, with a recent decreasing trend. OECD countries represent the top innovators and the top markets for technology. Some non-OECD countries, and particularly China, are also very active in terms of patenting activity in this sector. The majority of patents are first filed in OECD countries and only then in BRIC and other non-OECD countries. BRIC and other non-OECD countries apply for patents that are mostly marketed domestically, but BRIC countries represent important markets for patent duplication of OECD inventions. These results are indicative of significant technology transfer in the field of efficiency-improving technologies for electricity production. - Highlights: → We study innovation in efficiency-improving electricity generation technologies. → Relevant patents are identified and used as an indicator of innovation. → We show that there is significant technology transfer in this field. → Most patents are first filed in OECD countries and then in non-OECD countries. → Patents in non-OECD countries are mostly marketed domestically.

Supporting law students’ skills development online – a strategy to improve skills and reduce student stress?

Directory of Open Access Journals (Sweden)

Anne Hewitt

2017-08-01

Full Text Available Law students internationally suffer from a high level of psychological distress compared with the general and student populations, and anecdotal evidence suggests that students developing skills without adequate support experience significant stress and anxiety. This article considers an initiative at one Australian law school to develop a degree-wide structured online skills development programme as a means to both improve student skills acquisition and reduce student stress. The project implements, through the use of learning technology, the principles proposed by McKinney for making small changes to law school teaching, informed by self-efficacy theory, which can have powerful results.

User Interface Technology to Reduce Mental Transformations for Tangible Remote Dismantling Simulator

Energy Technology Data Exchange (ETDEWEB)

Hyun, Dongjun; Kim, Ikjune; Lee, Jonghwan; Kim, Geun-Ho; Jeong, Kwan-Seong; Choi, Byung-Seon; Moon, Jeikwon; Choi, Jong-Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

High-level radiation of the major components restricts access by human workers, and makes an accident or outage during the dismantling process more difficult to deal with. Since unexpected situations causes waste of budget and an aggravation of safety, the preliminary verification of the dismantling processes and equipment by the tangible remote dismantling simulator is very important. The design optimization of the dismantling processes and equipment is one of the most important objectives of the tangible remote dismantling simulator, as well. This paper proposes a user interface technology to reduce mental transformations for the tangible remote dismantling simulator. At the dismantling process simulation using the tangible remote dismantling simulator, the most difficult work is the remote operation handling the high degrees-of-freedom (DOF) manipulator due to complex mental transformations. The proposed user interface technology reduces mental transformations with constraints using the point projection and direction projection. The test result of the cutting process over the closure head of the RPV demonstrates that the proposed mental transformation reduction technology is operated successfully in the tangible remote dismantling simulator, and lets the operator be easy to control the high DOF manipulator even in the most difficult operation by reducing DOFs to be controlled manually.

User Interface Technology to Reduce Mental Transformations for Tangible Remote Dismantling Simulator

International Nuclear Information System (INIS)

Hyun, Dongjun; Kim, Ikjune; Lee, Jonghwan; Kim, Geun-Ho; Jeong, Kwan-Seong; Choi, Byung-Seon; Moon, Jeikwon; Choi, Jong-Won

2015-01-01

High-level radiation of the major components restricts access by human workers, and makes an accident or outage during the dismantling process more difficult to deal with. Since unexpected situations causes waste of budget and an aggravation of safety, the preliminary verification of the dismantling processes and equipment by the tangible remote dismantling simulator is very important. The design optimization of the dismantling processes and equipment is one of the most important objectives of the tangible remote dismantling simulator, as well. This paper proposes a user interface technology to reduce mental transformations for the tangible remote dismantling simulator. At the dismantling process simulation using the tangible remote dismantling simulator, the most difficult work is the remote operation handling the high degrees-of-freedom (DOF) manipulator due to complex mental transformations. The proposed user interface technology reduces mental transformations with constraints using the point projection and direction projection. The test result of the cutting process over the closure head of the RPV demonstrates that the proposed mental transformation reduction technology is operated successfully in the tangible remote dismantling simulator, and lets the operator be easy to control the high DOF manipulator even in the most difficult operation by reducing DOFs to be controlled manually

Secondary Products (Markets, Competition, and Technological Improvements)

Science.gov (United States)

Philip A. Araman

1988-01-01

Competitiveness, imports, exports, and technological improvements--these are issues facing secondary wood-product manufacturers. The major problems focus on increasing foreign imports and the inability of U.S. industries to repell the imports. How and where should we, as researchers, allocate our efforts to enhance the competitiveness of secondary forest industries in...

Material Fracture Characterization and Toughness Improving Technology Developments

International Nuclear Information System (INIS)

Lee, Bong Sang; Kim, M. C.; Lee, H. J. and others

2005-04-01

Reactor pressure boundary components including pressure vessel and piping are facing a severe aging condition that can degrade the physical-mechanical properties under neutron irradiation, high temperature, high pressure, and corrosive environments. In order to increase the safety of nuclear power plants, it is inevitable to improve the credibility and capability of evaluation technology based on the quantitative fracture mechanics for aging assessment of reactor components. Irradiation embrittlement is the primary aging mechanism of reactor pressure vessel and various techniques have been developed to predict the aging characteristics by using only small volume of irradiated materials. Material database of the domestic structural steels for KSNP's under reactor environments must be very important to play a role in developing an advanced material, in improving the safety of nuclear components, and also in expanding the nuclear industry abroad. This research project has been focused on developing an advanced technology of testing and analysis in the fracture mechanical point of view as well as acquiring test data and improving the performance of nuclear structural steels

Reasons for adopting technological innovations reducing physical workload in bricklaying

NARCIS (Netherlands)

Jong, A.M. de; Vink, P.; Kroon, J.C.A. de

2003-01-01

In this paper the adoption of technological innovations to improve the work of bricklayers and bricklayers' assistants is evaluated. Two studies were performed among 323 subjects to determine the adoption of the working methods, the perceived workload, experiences with the working methods, and the

New technologies reducing emissions from combustion of biofuels

International Nuclear Information System (INIS)

Oravainen, H.

1997-01-01

In reducing CO 2 emissions, bioenergy will be the most important source of renewable energy in the next few decades. In principle, combustion of biomass is friendly to the environment because CO 2 released during combustion is recycled back into natural circulation. Biofuels normally contain little nitrogen and sulphur. However, depending on the combustion technology used, emissions may be quite high. This is true of combustion of biomass fuels in small appliances like wood stoves, fireplaces, small boilers etc. When fuels having high content of volatile matter are burnt in appliances using batch type combustion, the process is rather an unsteady-state combustion. Emissions of carbon monoxide, other combustible gases and particulates are quite difficult to avoid. With continuous combustion processes this is not normally a problem. This conference paper presents some means of reducing emissions from combustion of biofuels. 5 refs., 4 figs

Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Melting Efficiency Improvement

Energy Technology Data Exchange (ETDEWEB)

Principal Investigator Kent Peaslee; Co-PI’s: Von Richards, Jeffrey Smith

2012-07-31

Steel foundries melt recycled scrap in electric furnaces and typically consume 35-100% excess energy from the theoretical energy requirement required to pour metal castings. This excess melting energy is multiplied by yield losses during casting and finishing operations resulting in the embodied energy in a cast product typically being three to six times the theoretical energy requirement. The purpose of this research project was to study steel foundry melting operations to understand energy use and requirements for casting operations, define variations in energy consumption, determine technologies and practices that are successful in reducing melting energy and develop new melting techniques and tools to improve the energy efficiency of melting in steel foundry operations.

Improvement of Supply Chain Performances Using RFID Technology

OpenAIRE

Turcu, Cornel; Turcu, Cristina; Graur, Adrian

2009-01-01

This chapter helps to improve readers understanding of the RFID and EPC potential for business processes. RFID technology is classified as a wireless AIDC technology that uses digital data encoded into a radio tag embedding a microchip with an antenna. The data stored on the tag is collected by a reader using radio waves. There are a large variety of RFID tags designs; they also have many different functional characteristics such as power source, carrier frequency, read range, data storage ca...

Benchmarking and performance improvement at Rocky Flats Technology Site

International Nuclear Information System (INIS)

Elliott, C.; Doyle, G.; Featherman, W.L.

1997-03-01

The Rocky Flats Environmental Technology Site has initiated a major work process improvement campaign using the tools of formalized benchmarking and streamlining. This paper provides insights into some of the process improvement activities performed at Rocky Flats from November 1995 through December 1996. It reviews the background, motivation, methodology, results, and lessons learned from this ongoing effort. The paper also presents important gains realized through process analysis and improvement including significant cost savings, productivity improvements, and an enhanced understanding of site work processes

Improvements to TAO Ocean Observations as a Result of Refresh Technology

Science.gov (United States)

Grissom, K.; Petraitis, D. C.; Pounder, D.

2016-02-01

The Tropical Atmosphere Ocean (TAO) array has been a major observational component of El Nino Southern Oscillation (ENSO) and climate prediction research since its completion in 1994 by NOAA's Pacific Marine Environmental Laboratory (PMEL). In 2005 operational responsibility and control of the TAO array was transitioned from PMEL to the National Data Buoy Center (NDBC). As part of the transition, a project for TAO Technology Refresh was developed to address equipment obsolescence and the need for higher data throughput in real-time. Completed in 2014, the "TAO Refresh" array has met the requirements of the NOAA transition plan and added new capabilities and value. These new capabilities include a reduced latency of data and increased real-time resolution from one observation per sensor each day to 144+ observations per sensor each day. Also, improvements in NDBC data management practices resulted in the development of a new TAO Automated Statistical Quality-control (TASQ) system that provides a real-time automated quality-control method based upon 20 years of historical data. In addition, an active method for gathering actionable evidence and combating vandalism was achieved through the installation of cameras on TAO buoys. With these enhanced capabilities, the TAO Refresh array is better positioned to support timely analyses of the diurnal cycle and high frequency weather phenomena that affect climate. An added benefit of the Refresh technology is the reduced sampling error due to the temporal averaging. For example, during a recent week long vandalism event at a Refresh buoy we have found an average error of 0.24°C (±0.17) in the subsurface temperature daily average, with the maximum error of 0.67°C. Historically, due to the limitations of real-time communications, these errors were masked within the daily average. However, with today's satellite system we can retrieve the full-resolution time series in real-time and improve the quality of our data.

The Use of information technology tools to reduce barriers of distance learning

OpenAIRE

Targamadzė, Aleksandras; Petrauskienė, Rūta

2012-01-01

Distance learning takes place when learning conditions do not allow using traditional learning. Remoteness is the main feature of distance learning; however, it can be various. Remoteness is frequently described as barriers and includes traditional barriers such as distance and time as well as technological, organizational, social, cultural, psychological and other barriers that have not been examined so widely. Barriers can be eliminated or reduced when using information technologies (ITs). ...

Efficiency improvements by Metal Wrap Through technology for n-type Si solar cells and modules

Energy Technology Data Exchange (ETDEWEB)

Wenchao, Zhao; Jianming, Wang; Yanlong, Shen; Ziqian, Wang; Yingle, Chen; Shuquan, Tian; Zhiliang, Wan; Bo, Yu; Gaofei, Li; Zhiyan, Hu; Jingfeng, Xiong [Yingli Green Energy Holding Co., Ltd, 3399 North Chaoyang Avenue, Baoding (China); Guillevin, N.; Heurtault, B.; Aken, B.B. van; Bennett, I.J.; Geerligs, L.J.; Weeber, A.W.; Bultman, J.H. [ECN Solar Energy, Petten (Netherlands)

2012-09-15

N-type Metal Wrap Through (n-MWT) is presented as an industrially promising back-contact technology to reach high performance of silicon solar cells and modules. It can combine benefits from both n-type base and MWT metallization. In this paper, the efficiency improvements of commercial industrial n-type bifacial Si solar cells (239 cm{sup 2}) and modules (60 cells) by the integration of the MWT technique are described. For the cell, after the optimization of integration, over 0.3% absolute efficiency gain was achieved over the similar non-MWT technology, and Voc gain and Isc gain up to 0.9% and 3.5%, respectively. These gains are mainly attributed to reduced shading loss and surface recombination. Besides the front pattern optimization, a 0.1m{Omega} reduction of Rs in via part will induce further 0.06% absolute efficiency improvement. For the module part, a power output of n-MWT module up to 279W was achieved, corresponding to a module efficiency of about 17.7%.

Do water-saving technologies improve environmental flows?

Science.gov (United States)

Batchelor, Charles; Reddy, V. Ratna; Linstead, Conor; Dhar, Murli; Roy, Sumit; May, Rebecca

2014-10-01

Water saving and conservation technologies (WCTs) have been promoted widely in India as a practical means of improving the water use efficiency and freeing up water for other uses (e.g. for maintaining environmental flows in river systems). However, there is increasing evidence that, somewhat paradoxically, WCTs often contribute to intensification of water use by irrigated and rainfed farming systems. This occurs when: (1) Increased crop yields are coupled with increased consumptive water use and/or (2) Improved efficiency, productivity and profitability encourages farmers to increase the area cropped and/or to adopt multiple cropping systems. In both cases, the net effect is an increase in annual evapotranspiration that, particularly in areas of increasing water scarcity, can have the trade-off of reduced environmental flows. Recognition is also increasing that the claimed water savings of many WCTs may have been overstated. The root cause of this problem lies in confusion over what constitutes real water saving at the system or basin scales. The simple fact is that some of the water that is claimed to be ‘saved’ by WCTs would have percolated into the groundwater from where it can be and often is accessed and reused. Similarly, some of the “saved” runoff can be used downstream by, for example, farmers or freshwater ecosystems. This paper concludes that, particularly in areas facing increasing water scarcity, environmental flows will only be restored and maintained if they are given explicit (rather than theoretical or notional) attention. With this in mind, a simple methodology is proposed for deciding when and where WCTs may have detrimental impacts on environmental flows.

Development of remote decontamination technologies improving internal environment of reactor buildings at Fukushima Daiichi Nuclear Power Station

International Nuclear Information System (INIS)

Hotta, Koji; Hayashi, Hirotada; Sakai, Hitoshi

2016-01-01

The reactor buildings at the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Co., Inc., which was seriously damaged by the Great East Japan Earthquake of March 11, 2011, have been highly contaminated by radioactive materials. To safely and efficiently advance the processes related to the forthcoming decommissioning of the reactors, it is necessary to improve the hazardous environment inside the reactor buildings. During the more than four years that have elapsed since the Great East Japan Earthquake, Toshiba has been implementing various measures to reduce the ambient dose rates inside the reactor buildings through decontamination work and participation in a national project for the development of remote decontamination technologies for reactor buildings. A variety of vehicles and technologies to support decontamination work have been developed through these activities, and are significantly contributing to improvement of the environment inside the reactor buildings. (author)

Using Technology to Improve Student Learning. NCREL Viewpoints, Volume 12

Science.gov (United States)

Gahala, Jan, Ed.

2004-01-01

"Viewpoints" is a multimedia package containing two audio CDs and a short, informative booklet. This volume of "Viewpoints" focuses on how technology can help improve student learning. The audio CDs provide the voices, or viewpoints, of various leaders from the education field who work closely with technology issues. Their…

Identification of technology options for reducing nitrogen pollution in cropping systems of Pujiang

NARCIS (Netherlands)

Fang, B.; Wang, G.; Berg, van den M.M.; Roetter, R.P.

2005-01-01

This work analyses the potential role of nitrogen pollution technology of crop systems of Pujiang, County in Eastern China¿s Zhejiang Province, rice and vegetables are important cropping systems. We used a case study approach involving comparison of farmer practices and improved technologies. This

The use of real-time feedback via wireless technology to improve hand hygiene compliance.

Science.gov (United States)

Marra, Alexandre R; Sampaio Camargo, Thiago Zinsly; Magnus, Thyago Pereira; Blaya, Rosangela Pereira; Dos Santos, Gilson Batista; Guastelli, Luciana Reis; Rodrigues, Rodrigo Dias; Prado, Marcelo; Victor, Elivane da Silva; Bogossian, Humberto; Monte, Julio Cesar Martins; dos Santos, Oscar Fernando Pavão; Oyama, Carlos Kazume; Edmond, Michael B

2014-06-01

Hand hygiene (HH) is widely regarded as the most effective preventive measure for health care-associated infection. However, there is little robust evidence on the best interventions to improve HH compliance or whether a sustained increase in compliance can reduce rates of health care-associated infection. To evaluate the effectiveness of a real-time feedback to improve HH compliance in the inpatient setting, we used a quasiexperimental study comparing the effect of real-time feedback using wireless technology on compliance with HH. The study was conducted in two 20-bed step-down units at a private tertiary care hospital. Phase 1 was a 3-month baseline period in which HH counts were performed by electronic handwash counters. After a 1-month washout period, a 7-month intervention was performed in one step-down unit while the other unit served as a control. HH, as measured by dispensing episodes, was significantly higher in the intervention unit (90.1 vs 73.1 dispensing episodes/patient-day, respectively, P = .001). When the intervention unit was compared with itself before and after implementation of the wireless technology, there was also a significant increase in HH after implementation (74.5 vs 90.1 episodes/patient-day, respectively, P = .01). There was also an increase in mean alcohol-based handrub consumption between the 2 phases (68.9 vs 103.1 mL/patient-day, respectively, P = .04) in the intervention unit. We demonstrated an improvement in alcohol gel usage via implementation of real-time feedback via wireless technology. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Improvement to Air2Air Technology to Reduce Fresh-Water Evaporative Cooling Loss at Coal-Based Thermoelectric Power Plants

Energy Technology Data Exchange (ETDEWEB)

Ken Mortensen

2011-12-31

This program was undertaken to enhance the manufacturability, constructability, and cost of the Air2Air{TM} Water Conservation and Plume Abatement Cooling Tower, giving a validated cost basis and capability. Air2Air{TM} water conservation technology recovers a portion of the traditional cooling tower evaporate. The Condensing Module provides an air-to-air heat exchanger above the wet fill media, extracting the heat from the hot saturated moist air leaving in the cooling tower and condensing water. The rate of evaporate water recovery is typically 10% - 25% annually, depending on the cooling tower location (climate). This program improved the efficiency and cost of the Air2Air{TM} Water Conservation Cooling Tower capability, and led to the first commercial sale of the product, as described.

Improving collaboration between primary care research networks using Access Grid technology

Directory of Open Access Journals (Sweden)

Zsolt Nagykaldi

2008-05-01

Full Text Available Access Grid (AG is an Internet2-driven, high performance audio_visual conferencing technology used worldwide by academic and government organisations to enhance communication, human interaction and group collaboration. AG technology is particularly promising for improving academic multi-centre research collaborations. This manuscript describes how the AG technology was utilised by the electronic Primary Care Research Network (ePCRN that is part of the National Institutes of Health (NIH Roadmap initiative to improve primary care research and collaboration among practice- based research networks (PBRNs in the USA. It discusses the design, installation and use of AG implementations, potential future applications, barriers to adoption, and suggested solutions.

The benefits of improved technologies in agricultural aviation. [economic impact and aircraft configurations

Science.gov (United States)

1978-01-01

The economic benefits attributable to a variety of potential technological improvements in agricultural aviation are discussed. Topics covered include: the ag-air industry, the data base used to estimate the potential benefits and a summary of the potential benefits from technological improvements; ag-air activities in the United States; foreign ag-air activities; major ag-air aircraft is use and manufacturers' sales and distribution networks; and estimates of the benefits to the United States of proposed technological improvements to the aircraft and dispersal equipment. A bibliography of references is appended.

Tactical Application of Gaming Technologies for Improved Battlespace Management

Science.gov (United States)

2007-01-01

the Digital Scene Matching Area Correlation (DSMAC) and the Global Positioning Satellite (GPS) System are coupled to the guidance systems to...Game Engine technology is driven by a huge market of consumers and the technology continues to improve each year. Commercially available Game...has largely been due to the emergence of a new class of middleware called “physics engines”. Used in games such as Gran Turismo 4 (GT4), these

Faculty Integration of Technology into Instruction and Students' Perceptions of Computer Technology to Improve Student Learning

Science.gov (United States)

Keengwe, Jared

2007-01-01

There has been a remarkable improvement in access and rate of adoption of technology in higher education. Even so, reports indicate that faculty members are not integrating technology into instruction in ways that make a difference in student learning (Cuban, 2001; McCannon & Crews, 2000). To help faculty make informed decisions on student…

Technological Improvements for Digital Fire Control Systems

Science.gov (United States)

2017-09-30

Final Technical Status Report For DOTC-12-01-INIT061 Technological Improvements for Digital Fire Control Systems Reporting Period: 30 Sep...accuracy and responsiveness to call for fire. These prototypes shall be more cost effective, sustainable , use a higher percentage of alternative...of the quad charts and provide DOTC with sufficient initiative information, the Quarterly Report must be supplemented with data described below

Prosthetic Smart Socket Technology to Improve Patient Interaction, Usability, Comfort, Fit and Function

Science.gov (United States)

2017-10-01

impact on society beyond science and technology ? Nothing to report at this time. 5. CHANGES/PROBLEMS: Changes in approach and reasons for...AWARD NUMBER: W81XWH-16-1-0785 TITLE: Prosthetic Smart Socket Technology to Improve Patient Interaction, Usability, Comfort, Fit and Function...2016 - 29 Sep 2017 4. TITLE AND SUBTITLE Prosthetic Smart Socket Technology to Improve Patient Interaction, Usability, Comfort, Fit and Function 5a

Adoption of improved technologies in soyabean processing and ...

African Journals Online (AJOL)

adequate information and limited understanding. To increase protein food intake, adoption of soyabean improved technologies should be encouraged. Efforts should be made by extension workers to create more awareness on the importance of these innovations and on methods of processing. This way, consumption of ...

Technology Roadmap: Low-Carbon Technology for the Indian Cement Industry

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-06-01

The Indian cement industry is one of the most efficient in the world. Its efforts to reduce its carbon footprint by adopting the best available technologies and environmental practices are reflected in the achievement of reducing total CO2 emissions to an industrial average of 0.719 tCO2/t cement in 2010 from a substantially higher level of 1.12 tCO2/t cement in 1996. However, because the manufacturing process relies on the burning of limestone, it still produced 137 MtCO2 in 2010 – approximately 7% of India’s total man-made CO2 emissions. Yet opportunity for improvement exists, particularly in relation to five key levers that can contribute to emissions reductions: alternative fuel and raw materials; energy efficiency; clinker substitution; waste heat recovery and newer technologies. This roadmap sets out one pathway by which the Indian cement industry can reach its targets to improve energy efficiency and reduce CO2 emissions by 2050, thereby laying the foundation for low-carbon growth in the years beyond. The Technology Roadmap: Low-Carbon Technology for the Indian Cement Industry builds on the global IEA technology roadmap for the cement sector developed by the IEA and the World Business Council for Sustainable Development’s Cement Sustainability Initiative. It outlines a possible transition path for the Indian cement industry to reduce its direct CO2 emissions intensity to 0.35 tCO2/t cement and support the global goal of halving CO2 emissions by 2050.

Radiation technology in finishing process improves health, safety and environment (HSE) in the furniture manufacturing industry

International Nuclear Information System (INIS)

Ahmad Shakri Mat Seman

1999-01-01

In furniture manufacturing, processes like cross cutting, molding, planning, shaping, turning, assembling and finishing are involved. The most significant types of negative impact of these processes are such as dust emission, noise, hazardous work, health risk, emission of organic solvent, toxic chemicals emission and chemical waste. In the finishing process, a number of negative effects that will cause health, safety and environmental (HSE) performance. This article highlights the environmental problems in the furniture finishing processes and how the radiation technology can reduce these negative impacts. The drawbacks that hamper the manufacturers from adopting this technology are also discussed. The objective of the paper is to create the awareness among the industrialist and consumers on the HSE hazardous in furniture finishing and steps can be taken to improve

Improving food preservation to reduce food waste

OpenAIRE

Gronert, Alicja; Bikova, Borislava; Salce, Luca; Nogués, Marc; Batistelli, Patryk; Farid, Yomna

2014-01-01

The theme and issue of ‘Improving food preservation to reduce food waste’ is associated with all group members participating in this research project. This topic covers multiple processes including purchasing, preserving, preparing and storing food. The industry of fresh fruits and vegetables is an enormous market, which will not disappear any time soon. Food waste is mostly disregarded as fresh fruits and vegetables are mostly inexpensive. All group members believe that this mindset needs to...

Space-based Networking Technology Developments in the Interplanetary Network Directorate Information Technology Program

Science.gov (United States)

Clare, Loren; Clement, B.; Gao, J.; Hutcherson, J.; Jennings, E.

2006-01-01

Described recent development of communications protocols, services, and associated tools targeted to reduce risk, reduce cost and increase efficiency of IND infrastructure and supported mission operations. Space-based networking technologies developed were: a) Provide differentiated quality of service (QoS) that will give precedence to traffic that users have selected as having the greatest importance and/or time-criticality; b) Improve the total value of information to users through the use of QoS prioritization techniques; c) Increase operational flexibility and improve command-response turnaround; d) Enable new class of networked and collaborative science missions; e) Simplify applications interfaces to communications services; and f) Reduce risk and cost from a common object model and automated scheduling and communications protocols. Technologies are described in three general areas: communications scheduling, middleware, and protocols. Additionally developed simulation environment, which provides comprehensive, quantitative understanding of the technologies performance within overall, evolving architecture, as well as ability to refine & optimize specific components.

Why technology matters as much as science in improving healthcare

Directory of Open Access Journals (Sweden)

Szczerba Robert J

2012-09-01

Full Text Available Abstract Background More than half a million new items of biomedical research are generated every year and added to Medline. How successful are we at applying this steady accumulation of scientific knowledge and so improving the practice of medicine in the USA? Discussion The conventional wisdom is that the US healthcare system is plagued by serious cost, access, safety and quality weaknesses. A comprehensive solution must involve the better translation of an abundance of clinical research into improved clinical practice. Yet the application of knowledge (i.e. technology remains far less well funded and less visible than the generation, synthesis and accumulation of knowledge (i.e. science, and the two are only weakly integrated. Worse, technology is often seen merely as an adjunct to practice, e.g. electronic health records. Several key changes are in order. A helpful first step lies in better understanding the distinction between science and technology, and their complementary strengths and limitations. The absolute level of funding for technology development must be increased as well as being more integrated with traditional science-based clinical research. In such a mission-oriented federal funding strategy, the ties between basic science research and applied research would be better emphasized and strengthened. Summary It bears repeating that only by applying the wealth of existing and future scientific knowledge can healthcare delivery and patient care ever show significant improvement.

Residential Energy Efficiency Demonstration: Hawaii and Guam Energy Improvement Technology Demonstration Project

Energy Technology Data Exchange (ETDEWEB)

Earle, L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sparn, B. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Rutter, A. [Sustainability Solutions LLC (Guam); Briggs, D. [Naval Base Guam, Santa Rita (Guam)

2014-03-01

In order to meet its energy goals, the Department of Defense (DOD) has partnered with the Department of Energy (DOE) to rapidly demonstrate and deploy cost-effective renewable energy and energy-efficiency technologies. The scope of this project was to demonstrate tools and technologies to reduce energy use in military housing, with particular emphasis on measuring and reducing loads related to consumer electronics (commonly referred to as 'plug loads'), hot water, and whole-house cooling.

INFLATE: INFlate Landing Apparatus Technology

Science.gov (United States)

Koryanov, V. V. K.; Da-Poian, V. D. P.

2018-02-01

Our project, named INFLATE (INFlatable Landing Apparatus Technology), aims at reducing space landing risks and constraints and so optimizing space missions (reducing cost, mass, and risk and in the same time improving performance).

Reducing environmental damage through the use of unmanned aerial vehicles as the best available technology

Science.gov (United States)

Fedulova, E. A.; Akulov, A. O.; Rada, A. O.; Alabina, T. A.; Savina, Ju Ju

2018-01-01

The article examines the possibilities of using unmanned aerial vehicles as the best available technologies in the field of agriculture and mining. The object of the study is the use of unmanned aerial vehicles as the best available technology. The main areas of application of this technology are identified: agro technical operations, aerial photography of mining operations. The technology of unmanned aerial vehicles is compared with the technologies of ground agricultural machinery. The research methodology includes an expert evaluation of the unmanned aerial vehicle technology belonging to the class of the best available technologies by the criteria: the level of environmental impact, resource saving, the use of low-waste, non-waste processes, the existence of at least two objects, economic efficiency. Expert evaluations were processed using the apparatus of fuzzy sets, which make it possible to construct membership functions. This allowed us to prove that the technology of unmanned aerial vehicles belongs to a fuzzy set of the best available technologies. The results of the research show that the use of unmanned aerial vehicles provides a saving of resources, especially non-renewable combustible minerals, reduces emissions and discharges of pollutants into the atmosphere, and also reduces soil erosion. Unmanned aerial vehicles should be included in the national directories of the best available technologies for the mining industry and agriculture.

Statewide Quality Improvement Initiative to Reduce Early Elective Deliveries and Improve Birth Registry Accuracy.

Science.gov (United States)

Kaplan, Heather C; King, Eileen; White, Beth E; Ford, Susan E; Fuller, Sandra; Krew, Michael A; Marcotte, Michael P; Iams, Jay D; Bailit, Jennifer L; Bouchard, Jo M; Friar, Kelly; Lannon, Carole M

2018-04-01

To evaluate the success of a quality improvement initiative to reduce early elective deliveries at less than 39 weeks of gestation and improve birth registry data accuracy rapidly and at scale in Ohio. Between February 2013 and March 2014, participating hospitals were involved in a quality improvement initiative to reduce early elective deliveries at less than 39 weeks of gestation and improve birth registry data. This initiative was designed as a learning collaborative model (group webinars and a single face-to-face meeting) and included individual quality improvement coaching. It was implemented using a stepped wedge design with hospitals divided into three balanced groups (waves) participating in the initiative sequentially. Birth registry data were used to assess hospital rates of nonmedically indicated inductions at less than 39 weeks of gestation. Comparisons were made between groups participating and those not participating in the initiative at two time points. To measure birth registry accuracy, hospitals conducted monthly audits comparing birth registry data with the medical record. Associations were assessed using generalized linear repeated measures models accounting for time effects. Seventy of 72 (97%) eligible hospitals participated. Based on birth registry data, nonmedically indicated inductions at less than 39 weeks of gestation declined in all groups with implementation (wave 1: 6.2-3.2%, Pinitiative, they saw significant decreases in rates of early elective deliveries as compared with wave 3 (control; P=.018). All waves had significant improvement in birth registry accuracy (wave 1: 80-90%, P=.017; wave 2: 80-100%, P=.002; wave 3: 75-100%, Pinitiative enabled statewide spread of change strategies to decrease early elective deliveries and improve birth registry accuracy over 14 months and could be used for rapid dissemination of other evidence-based obstetric care practices across states or hospital systems.

Energy conservation technologies

Energy Technology Data Exchange (ETDEWEB)

Courtright, H.A. [Electric Power Research Inst., Palo Alto, CA (United States)

1993-12-31

The conservation of energy through the efficiency improvement of existing end-uses and the development of new technologies to replace less efficient systems is an important component of the overall effort to reduce greenhouse gases which may contribute to global climate change. Even though uncertainties exist on the degree and causes of global warming, efficiency improvements in end-use applications remain in the best interest of utilities, their customers and society because efficiency improvements not only reduce environmental exposures but also contribute to industrial productivity, business cost reductions and consumer savings in energy costs.

Technology and demand forecasting for carbon capture and storage technology in South Korea

International Nuclear Information System (INIS)

Shin, Jungwoo; Lee, Chul-Yong; Kim, Hongbum

2016-01-01

Among the various alternatives available to reduce greenhouse gas (GHG) emissions, carbon capture and storage (CCS) is considered to be a prospective technology that could both improve economic growth and meet GHG emission reduction targets. Despite the importance of CCS, however, studies of technology and demand forecasting for CCS are scarce. This study bridges this gap in the body of knowledge on this topic by forecasting CCS technology and demand based on an integrated model. For technology forecasting, a logistic model and patent network analysis are used to compare the competitiveness of CCS technology for selected countries. For demand forecasting, a competition diffusion model is adopted to consider competition among renewable energies and forecast demand. The results show that the number of patent applications for CCS technology will increase to 16,156 worldwide and to 4,790 in Korea by 2025. We also find that the United States has the most competitive CCS technology followed by Korea and France. Moreover, about 5 million tCO_2e of GHG will be reduced by 2040 if CCS technology is adopted in Korea after 2020. - Highlights: • Carbon capture and storage (CCS) can help mitigate climate change globally. • It can both improve economic growth and meet GHG emission reduction targets. • We forecast CCS technology and demand based on an integrated model. • The US has the most competitive CCS technology followed by Korea and France. • 5 million tCO_2e of GHG will be reduced by 2040 if CCS is adopted in Korea.

Applying Smart Grid Technology For Reducing Electric Energy Consumption

Energy Technology Data Exchange (ETDEWEB)

Hoffman, Roy

2010-09-15

In recent years the term 'Smart Grid' has become a widely used buzz word with respect to the operation of Electric Power Systems. One analysis has suggested that a Smart Grid could potentially reduce annual energy consumption in the USA by 56 to 203 billion kWh in 2030, corresponding to a 1.2 to 4.3% reduction in projected retail electricity sales in 2030. This paper discusses some of the smart grid technologies pertaining to the operation of electric power distribution networks.

Using computer, mobile and wearable technology enhanced interventions to reduce sedentary behaviour: a systematic review and meta-analysis.

Science.gov (United States)

Stephenson, Aoife; McDonough, Suzanne M; Murphy, Marie H; Nugent, Chris D; Mair, Jacqueline L

2017-08-11

High levels of sedentary behaviour (SB) are associated with negative health consequences. Technology enhanced solutions such as mobile applications, activity monitors, prompting software, texts, emails and websites are being harnessed to reduce SB. The aim of this paper is to evaluate the effectiveness of such technology enhanced interventions aimed at reducing SB in healthy adults and to examine the behaviour change techniques (BCTs) used. Five electronic databases were searched to identify randomised-controlled trials (RCTs), published up to June 2016. Interventions using computer, mobile or wearable technologies to facilitate a reduction in SB, using a measure of sedentary time as an outcome, were eligible for inclusion. Risk of bias was assessed using the Cochrane Collaboration's tool and interventions were coded using the BCT Taxonomy (v1). Meta-analysis of 15/17 RCTs suggested that computer, mobile and wearable technology tools resulted in a mean reduction of -41.28 min per day (min/day) of sitting time (95% CI -60.99, -21.58, I2 = 77%, n = 1402), in favour of the intervention group at end point follow-up. The pooled effects showed mean reductions at short (≤ 3 months), medium (>3 to 6 months), and long-term follow-up (>6 months) of -42.42 min/day, -37.23 min/day and -1.65 min/day, respectively. Overall, 16/17 studies were deemed as having a high or unclear risk of bias, and 1/17 was judged to be at a low risk of bias. A total of 46 BCTs (14 unique) were coded for the computer, mobile and wearable components of the interventions. The most frequently coded were "prompts and cues", "self-monitoring of behaviour", "social support (unspecified)" and "goal setting (behaviour)". Interventions using computer, mobile and wearable technologies can be effective in reducing SB. Effectiveness appeared most prominent in the short-term and lessened over time. A range of BCTs have been implemented in these interventions. Future studies need to improve reporting

Process improvement technology for petrochemical plant; Sekiyu kagaku puranto ni okesu purosesu kaizen gijutsu

Energy Technology Data Exchange (ETDEWEB)

Yamada, Shin

1999-05-05

Before, GTC technology Co. was a manufacturer of the tray as a Greenwich technology. It is the subsidiary, which undertakes technology and licence of the engineering firm in U.S.A. at present. It carries out besides the technology licence support in the startup for the prolonged driving of technical service, operating condition of the plant of improvement and optimization and, etc. Has made separation and purification technology, which made extractive distillation to be a beginning good and has the process improvement technology to the PTA (high-pure terephthalic acid) from BTX (benzene toluene xylene) of petrochemical plant. (NEDO)

Leveraging Health Information Technology to Improve Quality in Federal Healthcare.

Science.gov (United States)

Weigel, Fred K; Switaj, Timothy L; Hamilton, Jessica

2015-01-01

Healthcare delivery in America is extremely complex because it is comprised of a fragmented and nonsystematic mix of stakeholders, components, and processes. Within the US healthcare structure, the federal healthcare system is poised to lead American medicine in leveraging health information technology to improve the quality of healthcare. We posit that through developing, adopting, and refining health information technology, the federal healthcare system has the potential to transform federal healthcare quality by managing the complexities associated with healthcare delivery. Although federal mandates have spurred the widespread use of electronic health records, other beneficial technologies have yet to be adopted in federal healthcare settings. The use of health information technology is fundamental in providing the highest quality, safest healthcare possible. In addition, health information technology is valuable in achieving the Agency for Healthcare Research and Quality's implementation goals. We conducted a comprehensive literature search using the Google Scholar, PubMed, and Cochrane databases to identify an initial list of articles. Through a thorough review of the titles and abstracts, we identified 42 articles as having relevance to health information technology and quality. Through our exclusion criteria of currency of the article, citation frequency, applicability to the federal health system, and quality of research supporting conclusions, we refined the list to 11 references from which we performed our analysis. The literature shows that the use of computerized physician order entry has significantly increased accurate medication dosage and decreased medication errors. The use of clinical decision support systems have significantly increased physician adherence to guidelines, although there is little evidence that indicates any significant correlation to patient outcomes. Research shows that interoperability and usability are continuing challenges for

Analysis of technologies and experiences for reducing occupational radiation dose and study for applying to regulations

Energy Technology Data Exchange (ETDEWEB)

Moon, Joo Hyun; Park, Moon Soo; Lee, Un Jang; Song, Jae Hyuk; Kim, Byeong Soo; Kim, Chong Uk [Seoul National Univ., Seoul (Korea, Republic of)

2003-01-15

To reduce Occupational Radiation Dose (ORD) effectively and enhance the radiological safety, the comprehensive assessment of the experiences to reduce ORD should be made by regulatory body as well as utilities. Hence, the objective of this study is to assess the experiences for reducing ORD from the regulatory viewpoint. With the research objective, the followings are performed in this research; analysis of occupational dose trends at domestic and foreign NPPs, identification of the effective technologies for reducing ORD, examination of the effects of the technologies for reducing ORD, derivation of the regulatory means for implementing he research results. From this study, the regulatory means for effective reduction of ORD are derived. Hence, the results can be utilized as a basic materials for ALARA requirements.

Does improved access to diagnostic imaging results reduce hospital length of stay? A retrospective study

Directory of Open Access Journals (Sweden)

Hurlen Petter

2010-09-01

Full Text Available Abstract Background One year after the introduction of Information and Communication Technology (ICT to support diagnostic imaging at our hospital, clinicians had faster and better access to radiology reports and images; direct access to Computed Tomography (CT reports in the Electronic Medical Record (EMR was particularly popular. The objective of this study was to determine whether improvements in radiology reporting and clinical access to diagnostic imaging information one year after the ICT introduction were associated with a reduction in the length of patients' hospital stays (LOS. Methods Data describing hospital stays and diagnostic imaging were collected retrospectively from the EMR during periods of equal duration before and one year after the introduction of ICT. The post-ICT period was chosen because of the documented improvement in clinical access to radiology results during that period. The data set was randomly split into an exploratory part used to establish the hypotheses, and a confirmatory part. The data was used to compare the pre-ICT and post-ICT status, but also to compare differences between groups. Results There was no general reduction in LOS one year after ICT introduction. However, there was a 25% reduction for one group - patients with CT scans. This group was heterogeneous, covering 445 different primary discharge diagnoses. Analyses of subgroups were performed to reduce the impact of this divergence. Conclusion Our results did not indicate that improved access to radiology results reduced the patients' LOS. There was, however, a significant reduction in LOS for patients undergoing CT scans. Given the clinicians' interest in CT reports and the results of the subgroup analyses, it is likely that improved access to CT reports contributed to this reduction.

Using Innovative Methodologies From Technology and Manufacturing Companies to Reduce Heart Failure Readmissions.

Science.gov (United States)

Johnson, Amber E; Winner, Laura; Simmons, Tanya; Eid, Shaker M; Hody, Robert; Sampedro, Angel; Augustine, Sharon; Sylvester, Carol; Parakh, Kapil

2016-05-01

Heart failure (HF) patients have high 30-day readmission rates with high costs and poor quality of life. This study investigated the impact of a framework blending Lean Sigma, design thinking, and Lean Startup on 30-day all-cause readmissions among HF patients. This was a prospective study in an academic hospital in Baltimore, Maryland. Thirty-day all-cause readmission was assessed using the hospital's electronic medical record. The baseline readmission rate for HF was 28.4% in 2010 with 690 discharges. The framework was developed and interventions implemented in the second half of 2011. The impact of the interventions was evaluated through 2012. The rate declined to 18.9% among 703 discharges (P < .01). There was no significant change for non-HF readmissions. This study concluded that methodologies from technology and manufacturing companies can reduce 30-day readmissions in HF, demonstrating the potential of this innovations framework to improve chronic disease care. © The Author(s) 2014.

New Material Development for Surface Layer and Surface Technology in Tribology Science to Improve Energy Efficiency

International Nuclear Information System (INIS)

Ismail, R.; Tauviqirrahman, M.; Jamari; Schipper, D. J.

2009-01-01

This paper reviews the development of new material and surface technology in tribology and its contribution to energy efficiency. Two examples of the economic benefits, resulted from the optimum tribology in the transportation sector and the manufacturing industry are discussed. The new materials are proposed to modify the surface property by laminating the bulk material with thin layer/coating. Under a suitable condition, the thin layer on a surface can provide a combination of good wear, a low friction and corrosion resistance for the mechanical components. The innovation in layer technology results molybdenum disulfide (MoS2), diamond like carbon (DLC), cubic boron nitride (CBN) and diamond which perform satisfactory outcome. The application of the metallic coatings to carbon fibre reinforced polymer matrix composites (CFRP) has the capacity to provide considerable weight and power savings for many engineering components. The green material for lubricant and additives such as the use of sunflower oil which possesses good oxidation resistance and the use of mallee leaves as bio‐degradable solvent are used to answer the demand of the environmentally friendly material with good performance. The tribology research implementation for energy efficiency also touches the simple things around us such as: erasing the laser‐print in a paper with different abrasion techniques. For the technology in the engineering surface, the consideration for generating the suitable surface of the components in running‐in period has been discussed in order to prolong the components life and reduce the machine downtime. The conclusion, tribology can result in reducing manufacturing time, reducing the maintenance requirements, prolonging the service interval, improving durability, reliability and mechanical components life, and reducing harmful exhaust emission and waste. All of these advantages will increase the energy efficiency and the economic benefits.

New Material Development for Surface Layer and Surface Technology in Tribology Science to Improve Energy Efficiency

Science.gov (United States)

Ismail, R.; Tauviqirrahman, M.; Jamari, Jamari; Schipper, D. J.

2009-09-01

This paper reviews the development of new material and surface technology in tribology and its contribution to energy efficiency. Two examples of the economic benefits, resulted from the optimum tribology in the transportation sector and the manufacturing industry are discussed. The new materials are proposed to modify the surface property by laminating the bulk material with thin layer/coating. Under a suitable condition, the thin layer on a surface can provide a combination of good wear, a low friction and corrosion resistance for the mechanical components. The innovation in layer technology results molybdenum disulfide (MoS2), diamond like carbon (DLC), cubic boron nitride (CBN) and diamond which perform satisfactory outcome. The application of the metallic coatings to carbon fibre reinforced polymer matrix composites (CFRP) has the capacity to provide considerable weight and power savings for many engineering components. The green material for lubricant and additives such as the use of sunflower oil which possesses good oxidation resistance and the use of mallee leaves as bio-degradable solvent are used to answer the demand of the environmentally friendly material with good performance. The tribology research implementation for energy efficiency also touches the simple things around us such as: erasing the laser-print in a paper with different abrasion techniques. For the technology in the engineering surface, the consideration for generating the suitable surface of the components in running-in period has been discussed in order to prolong the components life and reduce the machine downtime. The conclusion, tribology can result in reducing manufacturing time, reducing the maintenance requirements, prolonging the service interval, improving durability, reliability and mechanical components life, and reducing harmful exhaust emission and waste. All of these advantages will increase the energy efficiency and the economic benefits.

Outside the box: will information technology be a viable intervention to improve the quality of cancer care?

Science.gov (United States)

Hesse, Bradford W; Hanna, Christopher; Massett, Holly A; Hesse, Nicola K

2010-01-01

The use of health information technology (IT) to resolve the crisis in communication inherent within the fragmented service environment of medical care in the United States is a strategic priority for the Department of Health and Human Services. Yet the deployment of health IT alone is not sufficient to improve quality in health service delivery; what is needed is a human factors approach designed to optimize the balance between health-care users, health-care providers, policies, procedures, and technologies. An evaluation of interface issues between primary and specialist care related to cancer reveals opportunities for human factors improvement along the cancer care continuum. Applications that emphasize cognitive support for prevention recommendations and that encourage patient engagement can help create a coordinated health-care environment conducive to cancer prevention and early detection. An emphasis on reliability, transparency, and accountability can help improve the coordination of activities among multiple service providers during diagnosis and treatment. A switch in emphasis from a transaction-based approach to one emphasizing long-term support for healing relationships should help improve patient outcomes during cancer survivorship and end-of-life care. Across the entire continuum of care, an emphasis on "meaningful use" of health IT-rather than on IT as an endpoint-should help put cancer on a path toward substantive continuous quality improvement. The accompanying research questions will focus on reducing the variance between the social and technical subsystems as IT is used to improve patient outcomes across the interfaces of care.

Improving Operational Risk Management Using Business Performance Management Technologies

Directory of Open Access Journals (Sweden)

Bram Pieket Weeserik

2018-02-01

Full Text Available Operational Risk Management (ORM comprises the continuous management of risks resulting from: human actions, internal processes, systems, and external events. With increasing requirements, complexity and a growing volume of risks, information systems provide benefits for integrating risk management activities and optimizing performance. Business Performance Management (BPM technologies are believed to provide a solution for effective Operational Risk Management by offering several combined technologies including: work flow, data warehousing, (advanced analytics, reporting and dashboards. BPM technologies can be integrated with an organization’s Planning & Control cycle and related to strategic objectives. This manuscript aims to show how ORM can benefit from BPM technologies via the development and practical validation of a new maturity model. The B4ORM maturity model was developed following the Design Science Research approach. The maturity model relates specific maturity levels of ORM processes with BPM technologies applicable for a specific maturity stage. There appears to be a strong relationship (0.78 with ORM process maturity and supporting BPM technologies. The B4ORM maturity model as described in this manuscript provides an ideal path of BPM technologies related to six distinctive stages of ORM, leading towards technologies suitable for continuous improvement of ORM processes and organization-wide integration.

Combining active chilled beams and air-cleaning technologies to improve the indoor climate in offices

DEFF Research Database (Denmark)

Ardkapan, Siamak Rahimi; Afshari, Alireza; Bergsøe, Niels Christian

2013-01-01

This project is part of a long-term research programme to study the possibilities of using efficient air-cleaning technologies to improve the indoor air quality in buildings. The purpose of this part of the project was to study the energy-saving potential of combining the cooling and cleaning of ...... than 5 Pa (0.104 Ibf /ft2). Furthermore, the measurement results of the combined system showed that adding the filter accelerated the removal rate of the particles by 2 h-1. However, the efficiency of the chilled beam in exchanging heat was reduced by 38%....

Efficiency improvement of technological preparation of power equipment manufacturing

Science.gov (United States)

Milukov, I. A.; Rogalev, A. N.; Sokolov, V. P.; Shevchenko, I. V.

2017-11-01

Competitiveness of power equipment primarily depends on speeding-up the development and mastering of new equipment samples and technologies, enhancement of organisation and management of design, manufacturing and operation. Actual political, technological and economic conditions cause the acute need in changing the strategy and tactics of process planning. At that the issues of maintenance of equipment with simultaneous improvement of its efficiency and compatibility to domestically produced components are considering. In order to solve these problems, using the systems of computer-aided process planning for process design at all stages of power equipment life cycle is economically viable. Computer-aided process planning is developed for the purpose of improvement of process planning by using mathematical methods and optimisation of design and management processes on the basis of CALS technologies, which allows for simultaneous process design, process planning organisation and management based on mathematical and physical modelling of interrelated design objects and production system. An integration of computer-aided systems providing the interaction of informative and material processes at all stages of product life cycle is proposed as effective solution to the challenges in new equipment design and process planning.

Reducing variability of workforce as a tool to improve plan reliability

DEFF Research Database (Denmark)

Wandahl, Søren; Yicheng, S.; Zygmunt, K. J.

Variability of flow is recognized as the greatest obstacle to production management. Since the work flow and labour flow are two dominators of work performance, it is important to manage them simultaneously. The objective of this paper is to examine whether by reducing the variance of a labour flow......, a plan reliability can be improved, therefore, three different construction labour data sets have been examined by utilizing Monte Carlo Simulation, to analyze the probability to finish simulated projects within a certain time. The research findings revealed that reducing variance in the workforce flow...... does not necessarily shorten the project length, nevertheless it increases probability to finish the tasks within a critical path duration. Additionally, it was concluded, that reducing the variance of crew allocation can improve the productivity....

Oil spill recovery technology

International Nuclear Information System (INIS)

Nash, J.; Cooper, W.; Nee, V.; Nigim, H.

1992-01-01

Current deficiencies in oil spill cleanup processes have resulted in research and development of new cleanup technologies at the University of Notre Dame. Emphasis on reducing, reusing and recycling equipment and waste at a cleanup site has prompted advances in oil recovery technology as well as improvement in sorbent materials. (author)

Benchmarking and Performance Improvement at Rocky Flats Environmental Technology Site

Energy Technology Data Exchange (ETDEWEB)

Elliott, C. [Kaiser-Hill Co., LLC, Golden, CO (United States)], Doyle, D. [USDOE Rocky Flats Office, Golden, CO (United States)], Featherman, W.D. [Project Performance Corp., Sterline, VA (United States)

1997-12-31

The Rocky Flats Environmental Technology Site (RFETS) has initiated a major work process improvement campaign using the tools of formalized benchmarking and streamlining. This paper provides insights into some of the process improvement activities performed at Rocky Flats from November 1995 through December 1996. It reviews the background, motivation, methodology, results, and lessons learned from this ongoing effort. The paper also presents important gains realized through process analysis and improvement including significant cost savings, productivity improvements, and an enhanced understanding of site work processes.

Study on strategies in joint implementation and its improvement to reduce CO2 emissions; CO2 sakugen no tame no kyodo jisshi ni okeru senryaku oyobi sono kaizen hosaku no kenkyu

Energy Technology Data Exchange (ETDEWEB)

Matsuhashi, R.; Ishitani, H. [The University of Tokyo, Tokyo (Japan)

1998-10-01

In order to reduce greenhouse gas emissions, we have to introduce measures to suppress economic differences between developed countries (DC) and less developed countries (LDC) as well as accelerate technology improvement. In this sense, Joint Implementation (JI) is a promising measure not only to economically reduce greenhouse gas emissions, but also to facilitate technology transfer from DC to LDC. In this article, we first investigated JI strategies, in which LDC can improve industrial energy efficiency under financial support of DC. Strategies of countries involved in JI was represented with Stackelberg game. Analytical results revealed that JI activities may considerably be diminished in Stackelberg equilibrium, depending on shapes of the marginal cost functions of reducing CO2. Therefore we proposed measures to prevent the suppression of JI and quantitatively evaluated the potential of this improved JI system. As far as actual data on economy and industry are concerned, we used the ones of Japan and China, since China has been rapidly increasing its economic scale and greenhouse gas emissions. However implications from these analyses are useful also for other countries. 8 refs., 7 figs.

Water Technology Innovation: 10 Market Opportunities

Science.gov (United States)

The Water Technology Innovation Blueprint offers an overview of market opportunities that include conserving and recovering energy, recovering nutrients, improving water infrastructure, reducing costs for water monitoring, and improving water quality.

DEFENSE SCIENCE AND TECHNOLOGY Adopting Best Practices Can Improve Innovation Investments and Management

Science.gov (United States)

2017-06-01

Defense Technology Development: Technology Transition Programs Support Military Users, but Opportunities Exist to Improve Measurement of Outcomes, GAO-13... LTE ), for cellular wireless communication applications. They also develop and commercialize numerous technologies used in handsets and tablets. They...17-499 Note: Technology Readiness Levels (TRL) are a tool that DOD, among others, uses to assess technology maturity. TRLs are measured on a scale

Technical Report on the Development of Novel Technology for Reducing the Toxicity of Mistletoe Lectin by using Radiation Fusion Technology

International Nuclear Information System (INIS)

Lee, Ju Woon; Kim, Jae Hun; Choi, Jong Il; Song, Beom Seok; Yoon, Yo Han; Jung, Pil Mun; Sung, Nak Yun

2009-10-01

The aim of this study was conducted to investigate the effect of irradiation on detoxification, structural change, and physiological change of Mistletoe lectin. Optimal irradiation dose was determined from the result of having maximum detoxification and remaining the immunological activity Irradiation technology could be effective method for detoxification of Mistletoe lectin containing the immunological activity. The results indicate the feasibility of novel technology for reduction of the toxicity of Mistletoe lectin by using radiation technology. Practical state though clinical test is needed to extend biomedicine field using radiation technology and improve of public health by the control of the disease that gradually increase every year

Deploying innovative technologies to improve DOE D ampersand D project baselines

International Nuclear Information System (INIS)

Rose, R.W.

1997-05-01

The insertion of innovative technologies to replace baseline technologies used in cost estimation and planning of DOE D ampersand D projects is considered a high risk endeavor by project and programmatic decision makers. It is almost always considered safer to go with the open-quotes devil you knowclose quotes than use a new or untried technology, methodology or system. The decision on the specific technology to be utilized to remediate a problem is often made months or years in advance of execution, and the highly proscriptive documentation of agreements necessary to obtain stakeholder and regulator approval of remedial plans is often counterproductive to considering improved technologies

"Mobile technology to improve heart failure outcomes: A proof of concept paper".

Science.gov (United States)

Athilingam, Ponrathi; Jenkins, Bradlee A; Zumpano, Heather; Labrador, Miguel A

2018-02-01

Heart failure (HF) causes significant symptom burden and human suffering with considerable economic burden due to hospital readmissions. Targeted interventions to encourage and support self-management behavior is warranted. To test the proof of concept of a mobile application (HeartMapp) in improving self-care management of patients with heart failure. An exploratory inquiry used a field study strategy with purposeful sampling and constant comparative analysis to test the proof of concept of HeartMapp using The Business Model Canvas framework. A total of 125 individuals, who were identified as potential candidates to use the HeartMapp completed the interview over a seven-week period in 2016. Constant comparative analysis indicated themes that Skilled Nursing Facilities had increased readmissions. Participants from Skilled Nursing Facilities reported concern on lack of staffing, star rating, and malpractice claims. Two types of patients were identified as early adapters of technology and those in denial. Health care facilities reported challenges on transitional care, nurses struggle with engagement of patients on self-care management. To avoid readmission penalty, hospitals task home care agencies to keep the patients home for 30-days. While home care agencies rely on remote telemonitoring reported that current telemonitoring devices are costly to maintain, thus exploring novel technology. The Business Model Canvas provided directions for future testing of HeartMapp for its usability as an adjunct device in home health setting to improve self-management and enhance communication with providers, and ultimately reduce readmissions. Copyright © 2017 Elsevier Inc. All rights reserved.

Status of Technological Advancements for Reducing Aircraft Gas Turbine Engine Pollutant Emissions

Science.gov (United States)

Rudey, R. A.

1975-01-01

Combustor test rig results indicate that substantial reductions from current emission levels of carbon monoxide (CO), total unburned hydrocarbons (THC), oxides of nitrogen (NOx), and smoke are achievable by employing varying degrees of technological advancements in combustion systems. Minor to moderate modifications to existing conventional combustors produced significant reductions in CO and THC emissions at engine low power (idle/taxi) operating conditions but did not effectively reduce NOx at engine full power (takeoff) operating conditions. Staged combusiton techniques were needed to simultaneously reduce the levels of all the emissions over the entire engine operating range (from idle to takeoff). Emission levels that approached or were below the requirements of the 1979 EPA standards were achieved with the staged combustion systems and in some cases with the minor to moderate modifications to existing conventional combustion systems. Results from research programs indicate that an entire new generation of combustor technology with extremely low emission levels may be possible in the future.

Using technology to improve access to specialist care in amyotrophic lateral sclerosis: A systematic review.

Science.gov (United States)

Hobson, Esther V; Baird, Wendy O; Cooper, Cindy L; Mawson, Sue; Shaw, Pamela J; Mcdermott, Christopher J

2016-01-01

Our objective was to review the evidence for using technology to improve access to specialist care for patients with amyotrophic lateral sclerosis (ALS) and their carers. Medline, Google Scholar and the Cochrane library were searched for articles describing technology that enabled clinical care of patients with ALS or their carers where the patient/carer and clinician were not in the same location. Two applications were identified: telemedicine to facilitate video conferencing as an alternative to outpatient consultations and telehealth monitoring for patients with respiratory failure. One randomized controlled trial using telehealth in patients with respiratory failure including 22 patients with ALS was identified. While rates of hospitalization were reduced, overall mortality was unchanged and there were too few patients with ALS in the study to detect significant benefit. In conclusion, there is limited evidence to support the use of telemedicine or telehealth in the care of patients with ALS. Future research needs to develop an understanding of the key beneficial aspects of the traditional specialist ALS service and how these factors could be delivered using technology. Successful evaluation and implementation of technologies to facilitate access to specialist care will only be possible if all the relevant impacts of an intervention are understood and measured.

Efficiency improvement of nuclear power plant operation: the significant role of advanced nuclear fuel technologies

International Nuclear Information System (INIS)

Velde Van de, A.; Burtak, F.

2001-01-01

Due to the increased liberalisation of the power markets, nuclear power generation is being exposed to high cost reduction pressure. In this paper we highlight the role of advanced nuclear fuel technologies to reduce the fuel cycle costs and therefore increase the efficiency of nuclear power plant operation. The key factor is a more efficient utilisation of the fuel and present developments at Siemens are consequently directed at (i) further increase of batch average burnup, (ii) improvement of fuel reliability, (iii) enlargement of fuel operation margins and (iv) improvement of methods for fuel design and core analysis. As a result, the nuclear fuel cycle costs for a typical LWR have been reduced during the past decades by about US$ 35 million per year. The estimated impact of further burnup increases on the fuel cycle costs is expected to be an additional saving of US$10 - 15 million per year. Due to the fact that the fuel will operate closer to design limits, a careful approach is required when introducing advanced fuel features in reload quantities. Trust and co-operation between the fuel vendors and the utilities is a prerequisite for the common success. (authors)

Emerging Energy-Efficient Technologies in Buildings Technology Characterizations for Energy Modeling

Energy Technology Data Exchange (ETDEWEB)

Hadley, SW

2004-10-11

The energy use in America's commercial and residential building sectors is large and growing. Over 38 quadrillion Btus (Quads) of primary energy were consumed in 2002, representing 39% of total U.S. energy consumption. While the energy use in buildings is expected to grow to 52 Quads by 2025, a large number of energy-related technologies exist that could curtail this increase. In recent years, improvements in such items as high efficiency refrigerators, compact fluorescent lights, high-SEER air conditioners, and improved building shells have all contributed to reducing energy use. Hundreds of other technology improvements have and will continue to improve the energy use in buildings. While many technologies are well understood and are gradually penetrating the market, more advanced technologies will be introduced in the future. The pace and extent of these advances can be improved through state and federal R&D. This report focuses on the long-term potential for energy-efficiency improvement in buildings. Five promising technologies have been selected for description to give an idea of the wide range of possibilities. They address the major areas of energy use in buildings: space conditioning (33% of building use), water heating (9%), and lighting (16%). Besides describing energy-using technologies (solid-state lighting and geothermal heat pumps), the report also discusses energy-saving building shell improvements (smart roofs) and the integration of multiple energy service technologies (CHP packaged systems and triple function heat pumps) to create synergistic savings. Finally, information technologies that can improve the efficiency of building operations are discussed. The report demonstrates that the United States is not running out of technologies to improve energy efficiency and economic and environmental performance, and will not run out in the future. The five technology areas alone can potentially result in total primary energy savings of between 2 and

Social media as an information system: improving the technological agility

Science.gov (United States)

Senadheera, Vindaya; Warren, Matthew; Leitch, Shona

2017-04-01

There is an increased focus on research involving social media. This research however has failed to catch up with the pace of the technology development and may prove disadvantageous for both practice and theory. The longitudinal study presented in the paper was conducted over a 3-year period involving Australian banks and popular social media technologies. The paper empirically tests the Honeycomb model as a tool that enhances the technological agility of social media. The paper fills a key research gap and provides dynamism to social media strategy formation, continuous improvement of strategy development in support of greater business agility.

Utilization of information and communications technology (ICT) to improve workface efficiency

Energy Technology Data Exchange (ETDEWEB)

Haines, A.; Rasmussen, J. [Industrial Audit Corp., Toronto, Ontario (Canada)

2010-07-01

Improving the efficiency of personnel at the workface is a key objective for executing construction, maintenance, quality, engineering and human performance activities. Schedule and cost overruns have a significant impact on the bottom line and on future business efficiency in execution of tasks is paramount to success. Leveraging information and communications technology (ICT) in construction, maintenance and operation environments can create a mobile workforce where personnel efficiency is improved, significant gains are made on schedule and cost, and the overall quality of work is raised. This paper will discuss the impact of mobile technology specifically on workface efficiency and productivity. (author)

Utilization of information and communications technology (ICT) to improve workface efficiency

International Nuclear Information System (INIS)

Haines, A.; Rasmussen, J.

2010-01-01

Improving the efficiency of personnel at the workface is a key objective for executing construction, maintenance, quality, engineering and human performance activities. Schedule and cost overruns have a significant impact on the bottom line and on future business efficiency in execution of tasks is paramount to success. Leveraging information and communications technology (ICT) in construction, maintenance and operation environments can create a mobile workforce where personnel efficiency is improved, significant gains are made on schedule and cost, and the overall quality of work is raised. This paper will discuss the impact of mobile technology specifically on workface efficiency and productivity. (author)

Fiscal 2000 report of investigation. Part 2. Study on development of technology for reducing nitrous oxide; 2000 nendo asanka chisso teigen taisaku gijutsu kaihatsu ni kansuru chosa hokokusho. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With the study focused on the possibility of technological breakthroughs, from the results of the survey on industrial technological trend and the preliminary examination concerning the technology for reducing nitrous oxide (N{sub 2}O), proposals were made on the direction of the future R and D. As technologies for reducing N{sub 2}O generation in the furnace, there are improvement of combustion process and development of high performance fluidized mediums. These are definite in their targets and methods, and are applicable as urgent countermeasures for immediate effects as well as highly reliable in the process of implementation. Meantime, as technologies for reducing N{sub 2}O in a flue gas by catalysts, there are decomposition or reduction of N{sub 2}O in the middle-temperature range (300-400 degrees C) and in the low-temperature range (lower than about 150 degrees C), suppression of N{sub 2}O as by-product generated in the NOx treatment process, and development of catalysts. These are applicable for a broad range of N{sub 2}O sources including automobiles. In addition, requiring no great modifications in the equipment infrastructure, these technologies will seem to spread immediately to a broad range of fields once an effective catalyst is developed. (NEDO)

FY2015 Electric Drive Technologies Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2016-02-29

The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

FY2014 Electric Drive Technologies Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None

2014-12-01

The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

FY2016 Electric Drive Technologies Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2017-07-03

The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

Smart City Energy Interconnection Technology Framework Preliminary Research

Science.gov (United States)

Zheng, Guotai; Zhao, Baoguo; Zhao, Xin; Li, Hao; Huo, Xianxu; Li, Wen; Xia, Yu

2018-01-01

to improve urban energy efficiency, improve the absorptive ratio of new energy resources and renewable energy sources, and reduce environmental pollution and other energy supply and consumption technology framework matched with future energy restriction conditions and applied technology level are required to be studied. Relative to traditional energy supply system, advanced information technology-based “Energy Internet” technical framework may give play to energy integrated application and load side interactive technology advantages, as a whole optimize energy supply and consumption and improve the overall utilization efficiency of energy.

Emerging biorefinery technologies for Indian forest industry to reduce GHG emissions.

Science.gov (United States)

Sharma, Naman; Nainwal, Shubham; Jain, Shivani; Jain, Siddharth

2015-11-01

The production of biofuels as alternative energy source over fossil fuels has gained immense interest over the years as it can contribute significantly to reduce the greenhouse gas (GHG) emissions from energy production and utilization. Also with rapidly increasing fuel price and fall in oil wells, the present scenario forces us to look for an alternative source of energy that will help us in the operation of industrial as well as the transportation sector. The pulp mills in India are one of the many options. The pulp mills in India can help us to produce bio-fuels by thermo-chemical/biochemical conversion of black liquor and wood residues. These technologies include extraction of hemi-cellulose from wooden chips and black liquor, lignin from black liquor, methanol from evaporator condensates, biogas production from waste sludge, syngas production from biomass using gasification and bio-oil production from biomass using pyrolysis. The objective of this paper is to overview these emerging bio-refinery technologies that can be implemented in Indian Forest Industry to get bio-fuels, bio-chemicals and bio-energy to reduce GHG emissions. Copyright © 2015 Elsevier Inc. All rights reserved.

Recombinant innovation and endogenous technological transitions

NARCIS (Netherlands)

Frenken, K.; Izquierdo, L.R.; Zeppini, P.

2012-01-01

We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

Information Literacy and technology to improve learning and education

NARCIS (Netherlands)

Mooij, Ton; Smeets, Ed

2011-01-01

Mooij, T., & Smeets, E. (2011, 13-16 September). Information Literacy and technology to improve learning and education. Presentation and discussion in a cross-network symposium of networks 16 and 12 at the ‘European Conference on Educational Research’ of the “European Educational Research

IPS technologies in sales improvement in companies in Banja Luka, Bosnia and Herzegovina

Science.gov (United States)

Micic, Lj; Preradovic, D.

2018-01-01

Modern economy, in first order Retail sector, are introducing new and modern technologies which improve sales, communication with customers as well as marketing decision process. Retail sector is more and more oriented to technologies which improve not just communication with possible customers but also information gathering for better decision making process. Among those technologies special place is given to Indoor Positioning Systems (IPS) technologies, specialized technologies which are used for locating the people and objects but also their movement as well as for communication with clients in the store. These technologies follows customers in the store, follow their movement across, communicate with them about offers and promotions but also are base for predictive marketing of retail sector which has a goal to achieve „offer to customers what they look for and what they really need“. These technologies are in limited usage in Banja Luka area but potential for their use is present. There is no enough demand from retails industry but having in mind that these technologies are raising in modern economies as well as predictions and trends it is to be expected that those technologies will be implemented in retail sector in this region too.

MANAGEMENT TECHNOLOGIES AS A MEANS OF IMPROVING MANAGEMENT

Directory of Open Access Journals (Sweden)

Komarov V. F.

2017-09-01

Full Text Available Scientists and managers pay great attention to improving planning and accounting at the enterprise level. Significantly less attention is paid to issues of theory and methodology of the personal planning and accounting activities of the managers themselves. This reason causes companies to sustain large losses. These losses could be avoided by introducing the company management technology, within which formalized procedures of personal planning and accounting would be implemented. It is necessary to implement the technology specifically. Because only the technology allows you to synchronize and harmonize the individual steps, procedures, operations of a process. Allows you to control the process. Eliminates the concept of «management is an art» or «management is a craft». In favor of the concept of «management is regulated by the procedural process». That allows to avoid dependence on personal qualities and whims of the agents. The technology is based on the principle of decomposing every activity into its component elements. This separation, on the one hand, allows to raise efficiency of implementation of individual stages, procedures, operations. On the other hand, conscious design and implementation of a rational sequence of steps, procedures, and operations give the system effect - increase in the productivity of human activity. In addition, technologies serve as a mediator between science and practice (scientific knowledge is transmitted to the economic and social spheres through technology, and help replicate best practices, promote specialization of human activity (and hence growth of labor productivity. This article investigates the nature and properties of management technologies, the technique of their design, describes the experience of building technology for personal planning and accounting activities of managers and specialists at specific enterprises.

Priorities for technology development and policy to reduce the risk from radioactive materials

International Nuclear Information System (INIS)

Duggan, Ruth Ann

2010-01-01

The Standing Committee on International Security of Radioactive and Nuclear Materials in the Nonproliferation and Arms Control Division conducted its fourth annual workshop in February 2010 on Reducing the Risk from Radioactive and Nuclear Materials. This workshop examined new technologies in real-time tracking of radioactive materials, new risks and policy issues in transportation security, the best practices and challenges found in addressing illicit radioactive materials trafficking, industry leadership in reducing proliferation risk, and verification of the Nuclear Nonproliferation Treaty, Article VI. Technology gaps, policy gaps, and prioritization for addressing the identified gaps were discussed. Participants included academia, policy makers, radioactive materials users, physical security and safeguards specialists, and vendors of radioactive sources and transportation services. This paper summarizes the results of this workshop with the recommendations and calls to action for the Institute of Nuclear Materials Management (INMM) membership community.

DNA Minicircle Technology Improves Purity of Adeno-associated Viral Vector Preparations

Directory of Open Access Journals (Sweden)

Maria Schnödt

2016-01-01

Full Text Available Adeno-associated viral (AAV vectors are considered as one of the most promising delivery systems in human gene therapy. In addition, AAV vectors are frequently applied tools in preclinical and basic research. Despite this success, manufacturing pure AAV vector preparations remains a difficult task. While empty capsids can be removed from vector preparations owing to their lower density, state-of-the-art purification strategies as of yet failed to remove antibiotic resistance genes or other plasmid backbone sequences. Here, we report the development of minicircle (MC constructs to replace AAV vector and helper plasmids for production of both, single-stranded (ss and self-complementary (sc AAV vectors. As bacterial backbone sequences are removed during MC production, encapsidation of prokaryotic plasmid backbone sequences is avoided. This is of particular importance for scAAV vector preparations, which contained an unproportionally high amount of plasmid backbone sequences (up to 26.1% versus up to 2.9% (ssAAV. Replacing standard packaging plasmids by MC constructs not only allowed to reduce these contaminations below quantification limit, but in addition improved transduction efficiencies of scAAV preparations up to 30-fold. Thus, MC technology offers an easy to implement modification of standard AAV packaging protocols that significantly improves the quality of AAV vector preparations.

Does improving surface cleaning and disinfection reduce health care-associated infections?

Science.gov (United States)

Donskey, Curtis J

2013-05-01

Contaminated environmental surfaces provide an important potential source for transmission of health care-associated pathogens. In recent years, a variety of interventions have been shown to be effective in improving cleaning and disinfection of surfaces. This review examines the evidence that improving environmental disinfection can reduce health care-associated infections. Published by Mosby, Inc.

Advancements in valve technology and industry lessons lead to improved plant reliability and cost savings

International Nuclear Information System (INIS)

Sharma, V.; Kalsi, M.S.

2005-01-01

effort to be focused on those valves that are more likely to degrade prematurely. Leveraging state-of-the-art valve technologies such as these can enable nuclear power plants to improve safety and reliability, and reduce costs associated with maintenance and operation of the plants. (authors)

SUPPORTIVE SUPERVISION AS A TECHNOLOGY OF IMPROVING THE QUALITY OF HOSPITAL CARE DELIVERY

Directory of Open Access Journals (Sweden)

Svetlana A. Mukhortova

2017-01-01

Full Text Available Improving the quality of medical care is a priority in countries with developed and developing health care system. There are various approaches to improve the quality and safety of patient’s care, as well as various strategies to encourage hospitals to achieve this goal. The purpose of the presented literature review was to analyze existing experience of the implementation of technology of supportive supervision in health care facilities to improve the quality of hospital care delivery. The data sources for publication were obtained from the following medical databases: PubMed, Cochrane Library, Medscape, e-library, and books on the topic of the review written by experts. The article discusses the results of the research studies demonstrating the successes and failures of supportive supervision technology application. Implementation of supportive supervision in medical facilities based on generalized experience of different countries is a promising direction in improving the quality of medical care delivery. This technology opens up opportunities to improve skills and work quality of the staff at pediatric hospitals in the Russian Federation.

Marketing, Technology, and Medicine: Recommendations on How to Incorporate Psychological Principles into New Technologies to Promote Healthy Behaviors.

Science.gov (United States)

Smith-Dektor, Asha H; Young, Sean D

2014-07-01

Although technologies have provided new forms of entertainment and improved our work efficiency, they have also reduced our need to engage in healthy physical activities. We believe that the psychological principles that make sedentary entertainment technologies (such as television and video games) engaging can be incorporated into new technologies to make new technologies both engaging and promote healthy behaviors. This short report aims to 1) describe how technology has traditionally reduced motivation to engage in health behaviors, 2) discuss key elements that may make sedentary technology (in this case, television) engaging, and 3) provide examples of how these same elements can be incorporated into new technologies to increase engagement and promote health behaviors.

Reducing cognitive load in the chemistry laboratory by using technology-driven guided inquiry experiments

Science.gov (United States)

Hubacz, Frank, Jr.

The chemistry laboratory is an integral component of the learning experience for students enrolled in college-level general chemistry courses. Science education research has shown that guided inquiry investigations provide students with an optimum learning environment within the laboratory. These investigations reflect the basic tenets of constructivism by engaging students in a learning environment that allows them to experience what they learn and to then construct, in their own minds, a meaningful understanding of the ideas and concepts investigated. However, educational research also indicates that the physical plant of the laboratory environment combined with the procedural requirements of the investigation itself often produces a great demand upon a student's working memory. This demand, which is often superfluous to the chemical concept under investigation, creates a sensory overload or extraneous cognitive load within the working memory and becomes a significant obstacle to student learning. Extraneous cognitive load inhibits necessary schema formation within the learner's working memory thereby impeding the transfer of ideas to the learner's long-term memory. Cognitive Load Theory suggests that instructional material developed to reduce extraneous cognitive load leads to an improved learning environment for the student which better allows for schema formation. This study first compared the cognitive load demand, as measured by mental effort, experienced by 33 participants enrolled in a first-year general chemistry course in which the treatment group, using technology based investigations, and the non-treatment group, using traditional labware, investigated identical chemical concepts on five different exercises. Mental effort was measured via a mental effort survey, a statistical comparison of individual survey results to a procedural step count, and an analysis of fourteen post-treatment interviews. Next, a statistical analysis of achievement was

Ablation - breakthrough technology to reduce uranium mining cost and increase resources

International Nuclear Information System (INIS)

Scriven, D.

2014-01-01

Ablation Technologies, LLC has developed and patented a revolutionary mining technology termed “ablation”. Ablation is a process using only mechanical forces to upgrade sandstone uranium ores. Uranium bearing sandstone orebodies are formed from a uranium enriched solution flowing through an aquifer until it reached some type of a “red/ox” zone forcing the uranium and other heavy metals to come out of solution. The precipitate forms a thin coating on the sand grains and fills the interstitial space between the sand grains but does no penetrate the sand grains. The ablation process knocks the precipitate off the sand grains using the forces of abrasion, elastic compression and rebounding, much like a mud coated tennis ball will sheds the mud when bounced off the ground, and to some extent, sonic waves. This produces a product which collectively is exactly the same as the ore going in but with all the individual components separated. This allows for disgressionary separation, the most important of which is screening. The uranium and heavy metals report to the finer fractions of the material, typically less than 250 mesh. The larger fractions contain less than five percent of the uranium but 90 to 95 percent of the mass. The advantages of making an enriched ore are numerous: • Reduce haulage costs from 90 to 95 percent. • Reduce milling costs by reducing material handling costs, acid consumption and tailings disposal costs. • In addition to reducing overall mining and milling costs, the overall recovery of the recourse is increased because the ablation process is so inexpensive, if the material has to be mined it will be ablated and screened. This basically means ore control is significantly reduced, cutoff grade goes to practically zero and overall resource recovery is significantly increased. • Environmentally, the two major advantages are reduced tailings requirements at the mill site and cleaner waste dumps at the mine site. This paper will show

Improving truck safety: Potential of weigh-in-motion technology

Directory of Open Access Journals (Sweden)

Bernard Jacob

2010-07-01

Full Text Available Trucks exceeding the legal mass limits increase the risk of traffic accidents and damage to the infrastructure. They also result in unfair competition between transport modes and companies. It is therefore important to ensure truck compliance to weight regulation. New technologies are being developed for more efficient overload screening and enforcement. Weigh-in-Motion (WIM technologies allow trucks to be weighed in the traffic flow, without any disruption to operations. Much progress has been made recently to improve and implement WIM systems, which can contribute to safer and more efficient operation of trucks.

The Benefits of Social Technology Use Among Older Adults Are Mediated by Reduced Loneliness

Science.gov (United States)

2016-01-01

Abstract Technology has the ability to enhance and enrich the lives of older adults by facilitating better interpersonal relationships. However, few studies have directly examined associations between technology use for social reasons and physical and psychological health among older adults. The current study examines the benefits of technology use in 591 older adults from the 2012 wave of the Health and Retirement Study (Mage = 68.18, SD = 10.75; 55.5% female). Social technology use was assessed through five technology-based behaviors (i.e., using e-mail, social networking sites, online video/phone calls, online chatting/instant messaging, using a smartphone). Attitudes toward the usability and benefits of technology use were also assessed. Older adults had generally positive attitudes toward technology. Higher social technology use was associated with better self-rated health, fewer chronic illnesses, higher subjective well-being, and fewer depressive symptoms. Furthermore, each of the links between social technology use and physical and psychological health was mediated by reduced loneliness. Close relationships are a large determinant of physical health and well-being, and technology has the potential to cultivate successful relationships among older adults. PMID:27541746

The Benefits of Social Technology Use Among Older Adults Are Mediated by Reduced Loneliness.

Science.gov (United States)

Chopik, William J

2016-09-01

Technology has the ability to enhance and enrich the lives of older adults by facilitating better interpersonal relationships. However, few studies have directly examined associations between technology use for social reasons and physical and psychological health among older adults. The current study examines the benefits of technology use in 591 older adults from the 2012 wave of the Health and Retirement Study (Mage = 68.18, SD = 10.75; 55.5% female). Social technology use was assessed through five technology-based behaviors (i.e., using e-mail, social networking sites, online video/phone calls, online chatting/instant messaging, using a smartphone). Attitudes toward the usability and benefits of technology use were also assessed. Older adults had generally positive attitudes toward technology. Higher social technology use was associated with better self-rated health, fewer chronic illnesses, higher subjective well-being, and fewer depressive symptoms. Furthermore, each of the links between social technology use and physical and psychological health was mediated by reduced loneliness. Close relationships are a large determinant of physical health and well-being, and technology has the potential to cultivate successful relationships among older adults.

Information Literacy and technology to improve learning and education

OpenAIRE

Mooij, Ton; Smeets, Ed

2011-01-01

Mooij, T., & Smeets, E. (2011, 13-16 September). Information Literacy and technology to improve learning and education. Presentation and discussion in a cross-network symposium of networks 16 and 12 at the ‘European Conference on Educational Research’ of the “European Educational Research Association” (EERA), Berlin, Germany.

Health technologies for the improvement of chronic disease management: a review of the Medical Advisory Secretariat evidence-based analyses between 2006 and 2011.

Science.gov (United States)

Nikitovic, M; Brener, S

2013-01-01

As part of ongoing efforts to improve the Ontario health care system, a mega-analysis examining the optimization of chronic disease management in the community was conducted by Evidence Development and Standards, Health Quality Ontario (previously known as the Medical Advisory Secretariat [MAS]). The purpose of this report was to identify health technologies previously evaluated by MAS that may be leveraged in efforts to optimize chronic disease management in the community. The Ontario Health Technology Assessment Series and field evaluations conducted by MAS and its partners between January 1, 2006, and December 31, 2011. Technologies related to at least 1 of 7 disease areas of interest (type 2 diabetes, coronary artery disease, atrial fibrillation, chronic obstructive pulmonary disease, congestive heart failure, stroke, and chronic wounds) or that may greatly impact health services utilization were reviewed. Only technologies with a moderate to high quality of evidence and associated with a clinically or statistically significant improvement in disease management were included. Technologies related to other topics in the mega-analysis on chronic disease management were excluded. Evidence-based analyses were reviewed, and outcomes of interest were extracted. Outcomes of interest included hospital utilization, mortality, health-related quality of life, disease-specific measures, and economic analysis measures. Eleven analyses were included and summarized. Technologies fell into 3 categories: those with evidence for the cure of chronic disease, those with evidence for the prevention of chronic disease, and those with evidence for the management of chronic disease. The impact on patient outcomes and hospitalization rates of new health technologies in chronic disease management is often overlooked. This analysis demonstrates that health technologies can reduce the burden of illness; improve patient outcomes; reduce resource utilization intensity; be cost

Evaluation of complementary technologies to reduce bio engine emissions

Energy Technology Data Exchange (ETDEWEB)

Blowes, J.H.

2003-09-01

This report summaries the results of a study examining the technical and economic feasibility of exhaust gas treatment technologies for reducing emissions from diesel engines burning pyrolysis oil to within internationally recognised limits. Details are given of the burning of pyrolysis oils in reciprocating engines, the reviewing of information on pyrolysis oils and engines, and the aim to produce detailed information for securing investment for a British funded diesel project. The burning of the pyrolysis oils in an oxygen-rich atmosphere to allow efficient combustion with acceptable exhaust emission limits is discussed along with the problems caused by the deterioration of the injection system.

Use of visualization technology to improve decision-making performance in nuclear power plants

International Nuclear Information System (INIS)

Hanes, Lewis F.; Naser, Joseph

2005-01-01

This paper contains a description of modern 2.5-D and 3-D visualization technology that may be applied to improve human situation awareness and decision-making in nuclear power plants. Visualization technology is being applied widely and successfully in several industries. Examples are presented of successful applications in the military, aviation, medical, entertainment, and nuclear industries. Additional opportunities are identified in the nuclear industry that may benefit from improved visualization

Breaking through barriers: using technology to address executive function weaknesses and improve student achievement.

Science.gov (United States)

Schwartz, David M

2014-01-01

Assistive technologies provide significant capabilities for improving student achievement. Improved accessibility, cost, and diversity of applications make integration of technology a powerful tool to compensate for executive function weaknesses and deficits and their impact on student performance, learning, and achievement. These tools can be used to compensate for decreased working memory, poor time management, poor planning and organization, poor initiation, and decreased memory. Assistive technology provides mechanisms to assist students with diverse strengths and weaknesses in mastering core curricular concepts.

Get rid of it: To what extent might improved reliability reduce self-generation in Nigeria?

International Nuclear Information System (INIS)

Oseni, Musiliu O.

2016-01-01

Despite the global concerns surrounding the threats of climate change to both human health and sustainable environments, gasoline- or diesel-powered generators with non-negligible emissions have become a popular choice among Nigerian households due to the poor publicly provided electricity. This study examines the extent to which an improvement in publicly supplied electricity may reduce backup generation and, by implication, reduce emissions from Nigerian homes. The results from a random-effects probit analysis reveal that, although improved electricity service quality would significantly reduce self-generation, self-generation would continue in the country, especially among rich and educated households. The study concludes by highlighting the policy implications of the findings. - Highlights: •We study how improved electricity supply might reduce self-generation in Nigeria. •Households use their generators less than 40% of times they suffer outages. •Improved service quality would significantly reduce self-generation. •However, self-generation would continue among rich and educated households. •Import tariff and pollution tax can be used to further reduce self-generation.

Development of base technology for high burnup PWR fuel improvement Volume 1 and 2

Energy Technology Data Exchange (ETDEWEB)

Kim, Yang Eun; Lee, Sang Hee; Bae, Seong Man [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center; Chung, Jin Gon; Chung, Sun Kyo; Kim, Sun Du [Korea Atomic Energy Research Inst., Daeduk (Korea, Republic of); Kim, Jae Won; Chung, Sun Kyo; Kim, Sun Du [Korea Nuclear Fuel Development Inst., Seoul (Korea, Republic of)

1995-12-31

Development of base technology for high burnup nuclear fuel -Development of UO{sub 2} pellet manufacturing technology -Improvement of fuel rod performance code -Improvement of plenum spring design -Study on the mechanical characteristics of fuel cladding -Organization of fuel failure mechanism Establishment of next stage R and D program (author). 226 refs., 100 figs.

Leveraging Interactive Patient Care Technology to Improve Pain Management Engagement.

Science.gov (United States)

Rao-Gupta, Suma; Kruger, David; Leak, Lonna D; Tieman, Lisa A; Manworren, Renee C B

2017-12-15

Most children experience pain in hospitals; and their parents report dissatisfaction with how well pain was managed. Engaging patients and families in the development and evaluation of pain treatment plans may improve perceptions of pain management and hospital experiences. The aim of this performance improvement project was to engage patients and families to address hospitalized pediatric patients' pain using interactive patient care technology. The goal was to stimulate conversations about pain management expectations and perceptions of treatment plan effectiveness among patients, parents, and health care teams. Plan-Do-Study-Act was used to design, develop, test, and pilot new workflows to integrate the interactive patient care technology system with the automated medication dispensing system and document actions from both systems into the electronic health record. The pediatric surgical unit and hematology/oncology unit of a free-standing, university-affiliated, urban children's hospital were selected to pilot this performance improvement project because of the high prevalence of pain from surgeries and hematologic and oncologic diseases, treatments, and invasive procedures. Documentation of pain assessments, nonpharmacologic interventions, and evaluation of treatment effectiveness increased. The proportion of positive family satisfaction responses for pain management significantly increased from fiscal year 2014 to fiscal year 2016 (p = .006). By leveraging interactive patient care technologies, patients and families were engaged to take an active role in pain treatment plans and evaluation of treatment outcomes. Improved active communication and partnership with patients and families can effectively change organizational culture to be more sensitive to patients' pain and patients' and families' hospital experiences. Copyright © 2017 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

Bring Your Own Technology (BYOT to Education

Directory of Open Access Journals (Sweden)

Joseph M. Woodside

2014-06-01

Full Text Available In an effort to reduce costs and increase worker satisfaction, many businesses have implemented a concept known as Bring Your Own Device (BYOD or Bring Your Own Technology (BYOT. Similarly, many school districts are beginning to implement BYOT policies and programs to improve educational learning opportunities for students who have a wide variety of technology devices. BYOT allow districts with limited budgets enable usage of technology while improving student engagement. This paper explores the technology devices, and educational implications of policies, device management, security and included components.

A system approach for reducing the environmental impact of manufacturing and sustainability improvement of nano-scale manufacturing

Science.gov (United States)

Yuan, Yingchun

This dissertation develops an effective and economical system approach to reduce the environmental impact of manufacturing. The system approach is developed by using a process-based holistic method for upstream analysis and source reduction of the environmental impact of manufacturing. The system approach developed consists of three components of a manufacturing system: technology, energy and material, and is useful for sustainable manufacturing as it establishes a clear link between manufacturing system components and its overall sustainability performance, and provides a framework for environmental impact reductions. In this dissertation, the system approach developed is applied for environmental impact reduction of a semiconductor nano-scale manufacturing system, with three case scenarios analyzed in depth on manufacturing process improvement, clean energy supply, and toxic chemical material selection. The analysis on manufacturing process improvement is conducted on Atomic Layer Deposition of Al2O3 dielectric gate on semiconductor microelectronics devices. Sustainability performance and scale-up impact of the ALD technology in terms of environmental emissions, energy consumption, nano-waste generation and manufacturing productivity are systematically investigated and the ways to improve the sustainability of the ALD technology are successfully developed. The clean energy supply is studied using solar photovoltaic, wind, and fuel cells systems for electricity generation. Environmental savings from each clean energy supply over grid power are quantitatively analyzed, and costs for greenhouse gas reductions on each clean energy supply are comparatively studied. For toxic chemical material selection, an innovative schematic method is developed as a visual decision tool for characterizing and benchmarking the human health impact of toxic chemicals, with a case study conducted on six chemicals commonly used as solvents in semiconductor manufacturing. Reliability of

Improving radiopharmaceutical supply chain safety by implementing bar code technology.

Science.gov (United States)

Matanza, David; Hallouard, François; Rioufol, Catherine; Fessi, Hatem; Fraysse, Marc

2014-11-01

The aim of this study was to describe and evaluate an approach for improving radiopharmaceutical supply chain safety by implementing bar code technology. We first evaluated the current situation of our radiopharmaceutical supply chain and, by means of the ALARM protocol, analysed two dispensing errors that occurred in our department. Thereafter, we implemented a bar code system to secure selected key stages of the radiopharmaceutical supply chain. Finally, we evaluated the cost of this implementation, from overtime, to overheads, to additional radiation exposure to workers. An analysis of the events that occurred revealed a lack of identification of prepared or dispensed drugs. Moreover, the evaluation of the current radiopharmaceutical supply chain showed that the dispensation and injection steps needed to be further secured. The bar code system was used to reinforce product identification at three selected key stages: at usable stock entry; at preparation-dispensation; and during administration, allowing to check conformity between the labelling of the delivered product (identity and activity) and the prescription. The extra time needed for all these steps had no impact on the number and successful conduct of examinations. The investment cost was reduced (2600 euros for new material and 30 euros a year for additional supplies) because of pre-existing computing equipment. With regard to the radiation exposure to workers there was an insignificant overexposure for hands with this new organization because of the labelling and scanning processes of radiolabelled preparation vials. Implementation of bar code technology is now an essential part of a global securing approach towards optimum patient management.

Copper Cable Recycling Technology. Innovative Technology Summary Report

International Nuclear Information System (INIS)

2001-01-01

The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in deactivation and decommissioning (D and D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors large-scale demonstration and deployment projects (LSDDPs). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased costs of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) generated a list of statements defining specific needs and problems where improved technology could be incorporated into ongoing D and D tasks. One such need is to reduce the volume of waste copper wire and cable generated by D and D. Deactivation and decommissioning activities of nuclear facilities generates hundreds of tons of contaminated copper cable, which are sent to radioactive waste disposal sites. The Copper Cable Recycling Technology separates the clean copper from contaminated insulation and dust materials in these cables. The recovered copper can then be reclaimed and, more importantly, landfill disposal volumes can be reduced. The existing baseline technology for disposing radioactively contaminated cables is to package the cables in wooden storage boxes and dispose of the cables in radioactive waste disposal sites. The Copper Cable Recycling Technology is applicable to facility decommissioning projects at many Department of Energy (DOE) nuclear facilities and commercial nuclear power plants undergoing decommissioning activities. The INEEL Copper Cable Recycling Technology Demonstration investigated the effectiveness and efficiency to recycle 13.5 tons of copper cable. To determine the effectiveness

Near field communications technology and the potential to reduce medication errors through multidisciplinary application

LENUS (Irish Health Repository)

O’Connell, Emer

2016-07-01

Patient safety requires optimal management of medications. Electronic systems are encouraged to reduce medication errors. Near field communications (NFC) is an emerging technology that may be used to develop novel medication management systems.

Ethical analysis to improve decision-making on health technologies.

Science.gov (United States)

Saarni, Samuli I; Hofmann, Bjørn; Lampe, Kristian; Lühmann, Dagmar; Mäkelä, Marjukka; Velasco-Garrido, Marcial; Autti-Rämö, Ilona

2008-08-01

Health technology assessment (HTA) is the multidisciplinary study of the implications of the development, diffusion and use of health technologies. It supports health-policy decisions by providing a joint knowledge base for decision-makers. To increase its policy relevance, HTA tries to extend beyond effectiveness and costs to also considering the social, organizational and ethical implications of technologies. However, a commonly accepted method for analysing the ethical aspects of health technologies is lacking. This paper describes a model for ethical analysis of health technology that is easy and flexible to use in different organizational settings and cultures. The model is part of the EUnetHTA project, which focuses on the transferability of HTAs between countries. The EUnetHTA ethics model is based on the insight that the whole HTA process is value laden. It is not sufficient to only analyse the ethical consequences of a technology, but also the ethical issues of the whole HTA process must be considered. Selection of assessment topics, methods and outcomes is essentially a value-laden decision. Health technologies may challenge moral or cultural values and beliefs, and their implementation may also have significant impact on people other than the patient. These are essential considerations for health policy. The ethics model is structured around key ethical questions rather than philosophical theories, to be applicable to different cultures and usable by non-philosophers. Integrating ethical considerations into HTA can improve the relevance of technology assessments for health care and health policy in both developed and developing countries.

Increased wood-fiber production: technology, economics, and ecology

Science.gov (United States)

William R. Bentley

1973-01-01

Forest tree improvement is a form of technological change, and it should be viewed as such. The economic objective of technological change is to increase productivity per dollar invested. This is accomplished through selection and breeding for increased growth rates or reduced losses to insects and disease. Programs which yield improved planting stock make forest...

The role of technology in reducing health care costs. Final project report

Energy Technology Data Exchange (ETDEWEB)

Sill, A.E.; Warren, S.; Dillinger, J.D.; Cloer, B.K.

1997-08-01

Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. This study was conducted by implementing both top-down and bottom-up strategies. The top-down approach used prosperity gaming methodology to identify future health care delivery needs. This effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements. The bottom-up approach identified and ranked interventional therapies employed in existing care delivery systems for a host of health-related conditions. Economic analysis formed the basis for development of care pathway interaction models for two of the most pervasive, chronic disease/disability conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Societal cost-benefit relationships based on these analyses were used to evaluate the effect of emerging technology in these treatment areas. 17 figs., 48 tabs.

Energy and greenhouse gas emission effects of corn and cellulosic ethanol with technology improvements and land use changes

International Nuclear Information System (INIS)

Wang, Michael Q.; Han, Jeongwoo; Haq, Zia; Tyner, Wallace E.; Wu, May; Elgowainy, Amgad

2011-01-01

Use of ethanol as a transportation fuel in the United States has grown from 76 dam 3 in 1980 to over 40.1 hm 3 in 2009 - and virtually all of it has been produced from corn. It has been debated whether using corn ethanol results in any energy and greenhouse gas benefits. This issue has been especially critical in the past several years, when indirect effects, such as indirect land use changes, associated with U.S. corn ethanol production are considered in evaluation. In the past three years, modeling of direct and indirect land use changes related to the production of corn ethanol has advanced significantly. Meanwhile, technology improvements in key stages of the ethanol life cycle (such as corn farming and ethanol production) have been made. With updated simulation results of direct and indirect land use changes and observed technology improvements in the past several years, we conducted a life-cycle analysis of ethanol and show that at present and in the near future, using corn ethanol reduces greenhouse gas emission by more than 20%, relative to those of petroleum gasoline. On the other hand, second-generation ethanol could achieve much higher reductions in greenhouse gas emissions. In a broader sense, sound evaluation of U.S. biofuel policies should account for both unanticipated consequences and technology potentials. We maintain that the usefulness of such evaluations is to provide insight into how to prevent unanticipated consequences and how to promote efficient technologies with policy intervention.

Improving animal health and livestock productivity to reduce poverty.

Science.gov (United States)

Pradère, J-P

2014-12-01

This study is based on scientific publications, statistics and field observations. It shows the importance of livestock in the economy and in the risk management strategies implemented by poor farming households. A comparison of livestock performance trends with the evolution of rural poverty in developing countries indicates that growth in livestock production alone is not enough to reduce rural poverty. To help reduce poverty, sustainable production should be based on productivity gains. Prerequisites for improving productivity include better public policies, enhanced research and the reduction of animal disease risk. The study draws attention to the economic, social and environmental consequences of inadequate support for animal health and production in the least developed countries, especially those of sub-Saharan Africa.

Efforts to reduce exposure at Japanese PWRs: CVCS improvement

Energy Technology Data Exchange (ETDEWEB)

Terada, Ryosuke [Mitsubishi Atomic Power Industries, Inc., Yokohama (Japan)

1995-03-01

Many reports have been focused on the reduction of radiation sources and related occupational exposures. The radiation sources mainly consist of corrosion products. Radiation dose rate is determined by the amount of the activated corrosion products on the surface of the primary loop components of Pressurized Water Reactor (PWR) plants. Therefore, reducing the amount of the corrosion product will contribute to the reduction of occupational exposures. In order to reduce the corrosion products, Chemical and Volume Control System (CVCS) has been improved in Japanese PWRs as follows: (a) Cation Bed Demineralizer Flowrate Control; (b) Hydrogen Peroxide Injection System; (c) Purification Flowrate During Plant Shutdown; (d) Fine Mesh Filters Upstream of Mixed Bed Demineralizers.

“Technology packages” for crop improvement using mutation induction and biotechnology

Energy Technology Data Exchange (ETDEWEB)

Lavi, U. [ARO-Volcani Center, P.O. Box 6, Bet Dagan 50250 (Israel); Heslop-Harrison, J. S. [Department of Biology, University of Leicester, Leicester LE1 7RH (United Kingdom); Spencer, M. M.; Lagoda, P. J.L. [International Atomic Energy Agency, Vienna (Austria)

2009-05-15

“Technology packages” in crop breeding may be defined as sets of various technologies used in synergy in order to achieve specific research goals. The tremendous advances in cell, molecular, atomic and even nano-technology afford scientists with powerful tools for exploring the Living Kingdom to the benefit of Human Kind. Mutation induction is undoubtedly one of these technologies, which has resulted in tremendous changes in the way genetics and derived genomics can be applied for crop improvement. Classical breeding approaches associated with agronomy and biotechnologies allow less than 2% of the population of industrialized countries to produce ample food to satisfy their national needs. The rapid expansion in science-based knowledge, relating to genetics, genomics, exploitation of biodiversity and induced mutations now has the potential to bridge the gap from research to application in agriculture in developing countries. In a timescale of decades some important changes could be efficiently implemented. In addition to the current goals of plant breeding new ones such as the following are emerging continuously: a demand for more meat in global diets - requiring serious increase of primary production; the demand for bioenergy crops other than just fuel woods mean that there is a new range of target plants for domestication and improvement where minimal or no classical breeding has been applied so far. When considering the major technological developments together with their potential in crop improvement for developing countries, there is a great need of clear and wise assessment of their usefulness and applicability. Various approaches such as DNA, markers, TILLING, high-throughput sequencing and reverse genetics are applicable to breeding programmes in developing countries. In the present chapter, all approaches considered appropriate are assessed on the basis of their advantages and constraints. (author)

Improving clinical outcomes in psychiatric care with touch-screen technology.

Science.gov (United States)

Newnham, Elizabeth A; Doyle, Emma L; Sng, Adelln A H; Hooke, Geoffrey R; Page, Andrew C

2012-05-01

Patient-focused research, which uses clinical characteristics to predict outcomes, is a field in which information technology has been effectively integrated with practice. The present research used touch-screen technology to monitor the daily self-report measures of 1,308 consecutive inpatients and day patients participating in a 2-week cognitive-behavioral therapy group. Providing regular feedback was effective in reducing symptoms for patients at risk of poor outcomes (Newnham, Hooke, & Page, 2010b). The use of touch screens in psychiatric monitoring encourages a collaborative dialogue between patients and therapists and promotes engagement in the process of progress monitoring and treatment evaluation.

Approach to improve construction management utilizing information technology

International Nuclear Information System (INIS)

Lee, Woo Bang; Moon, Jin Yeong

2003-01-01

Korea Hydro and Nuclear Power (KHNP) has been managed Nuclear Power Plant (NPP) construction projects including basic project planning, design, procurement, construction and start-up for nearly 30 years, and taken the leading role in the self-reliance program for constructing NPP. To maintain its leading position of construction technology and export it to other countries, it is more likely required to build the strong and competitive business management system to improve internal business efficiency and transparency, and also to respond to the change of external business circumstances such as electricity market opening. KHNP is implementing Enterprise Resource Planning (ERP) System as a business innovation tool to improve business efficiency, which changes the way of performing work from organizational system to process-oriented system in order to optimize the company resources to achieve above goals. This change should be made based on the results of performing Business Process Re-engineering (BPR) to maximize overall business efficiency. For the construction project management area, the establishment of Integrated Construction Information Sharing System based on Information Technology (IT) is the most important part. It makes possible to build collaboration system with 'Win-Win strategy' between the project owner and all related entities and to contribute to secure transparency and cut the project cost down. We would like to introduce our NPP Construction Project Management System, Infrastructure for Information System, Information Sharing System among construction related entities and Implementation Practices in this paper and also include the suggestions on our customary practice and subject that should be improved

A Review of New and Developing Technology to Significantly Improve Mars Sample-Return Missions

Science.gov (United States)

Carsey, F.; Brophy, J.; Gilmore, M.; Rodgers, D.; Wilcox, B.

2000-07-01

A JPL development activity was initiated in FY 1999 for the purpose of examining and evaluating technologies that could materially improve future (i.e., beyond the 2005 launch) Mars sample return missions. The scope of the technology review was comprehensive and end-to-end; the goal was to improve mass, cost, risk, and scientific return. A specific objective was to assess approaches to sample return with only one Earth launch. While the objective of the study was specifically for sample-return, in-situ missions can also benefit from using many of the technologies examined.

Wireless technologies for the Construction Sector

DEFF Research Database (Denmark)

Heller, Alfred; Orthmann, Christian

2014-01-01

the building sector and is therefore used to analyse requirements for alternative technologies. The motivation of the current work is to find upcoming technologies that bring improvements into the sector, for example improved life cycle costs and energy efficiencies, increasing quality, construction...... and operation efficiency and reducing faults and losses. The paper also lays out requirements expected by the sector. It will be shown that the wireless sensor network technology is a strong competitor that may meet the requirements. By analysing the application of such technologies throughout the building...... that follow the wireless sensor network, the paper will line up the requirements that the new technology has to meet to be introduced successfully....

Information technology-based approaches to reducing repeat drug exposure in patients with known drug allergies.

Science.gov (United States)

Cresswell, Kathrin M; Sheikh, Aziz

2008-05-01

There is increasing interest internationally in ways of reducing the high disease burden resulting from errors in medicine management. Repeat exposure to drugs to which patients have a known allergy has been a repeatedly identified error, often with disastrous consequences. Drug allergies are immunologically mediated reactions that are characterized by specificity and recurrence on reexposure. These repeat reactions should therefore be preventable. We argue that there is insufficient attention being paid to studying and implementing system-based approaches to reducing the risk of such accidental reexposure. Drawing on recent and ongoing research, we discuss a number of information technology-based interventions that can be used to reduce the risk of recurrent exposure. Proven to be effective in this respect are interventions that provide real-time clinical decision support; also promising are interventions aiming to enhance patient recognition, such as bar coding, radiofrequency identification, and biometric technologies.

Construction Project Performance Improvement through Radio Frequency Identification Technology Application on a Project Supply Chain

Science.gov (United States)

Wang, Heng

2017-01-01

Construction project productivity typically lags other industries and it has been the focus of numerous studies in order to improve the project performance. This research investigated the application of Radio Frequency Identification (RFID) technology on construction projects' supply chain and determined that RFID technology can improve the…

Reducing radiation exposure in an electrophysiology lab with introduction of newer fluoroscopic technology

Directory of Open Access Journals (Sweden)

Munish Sharma

2017-09-01

Full Text Available The use of fluoroscopic devices exposes patients and operators to harmful effects of ionizing radiation in an electrophysiology (EP lab. We sought to know if the newer fluoroscopic technology (Allura Clarity installed in a hybrid EP helps to reduce prescribed radiation dose. We performed radiation dose analysis of 90 patients who underwent various procedures in the EP lab at a community teaching hospital after the introduction of newer fluoroscopic technology in June of 2016.Watchman device insertion, radiofrequency ablation procedures, permanent pacemaker (PPM/implantable cardioverter defibrillator (ICD placement and battery changes were included in the study to compare radiation exposure during different procedures performed commonly in an EP lab. In all cases of watchman device placement, radiofrequency ablation procedures, PPM/ICD placement and battery changes, there was a statistically significant difference (<0.05 in radiation dose exposure. Significant reduction in radiation exposure during various procedures performed in an EP lab was achieved with aid of newer fluoroscopic technology and better image detection technology.

Utilizing Ultrasound Technology to Improve Livestock Marketing Decisions

OpenAIRE

Jayson L. Lusk; Randall Little; Allen Williams; John Anderson; Blair McKinley

2003-01-01

This study estimates the value of using ultrasound technology to improve cattle marketing decisions by optimally choosing a particular marketing method. For the particular group of cattle analyzed, results indicate that using ultrasound information to selectively market cattle could have increased revenue by $25.53/head, $4.98/head, or $32.90/head, compared with simply marketing all animals on a live weight, dressed weight, or grid basis, respectively. Even if producers incorporate such infor...

General principles of passive radar signature reducing – stealth technology and its applications

Directory of Open Access Journals (Sweden)

Alexandru Marius PANAIT

2010-03-01

Full Text Available The paper presents passive radar signature reducing principles and technologies and discusses the ways to implement stealthy characteristics in general vehicle design. Stealth is a major requirement to all current-generation military vehicle designs and also a strong selling point for various aircraft and UAVs.

National Institute of Justice (NIJ): improving the effectiveness of law enforcement via homeland security technology improvements (Keynote Address)

Science.gov (United States)

Morgan, John S.

2005-05-01

Law enforcement agencies play a key role in protecting the nation from and responding to terrorist attacks. Preventing terrorism and promoting the nation"s security is the Department of Justice"s number one strategic priority. This is reflected in its technology development efforts, as well as its operational focus. The National Institute of Justice (NIJ) is the national focal point for the research, development, test and evaluation of technology for law enforcement. In addition to its responsibilities in supporting day-to-day criminal justice needs in areas such as less lethal weapons and forensic science, NIJ also provides critical support for counter-terrorism capacity improvements in state and local law enforcement in several areas. The most important of these areas are bomb response, concealed weapons detection, communications and information technology, which together offer the greatest potential benefit with respect to improving the ability to law enforcement agencies to respond to all types of crime including terrorist acts. NIJ coordinates its activities with several other key federal partners, including the Department of Homeland Security"s Science and Technology Directorate, the Technical Support Working Group, and the Department of Defense.

Image noise reduction technology reduces radiation in a radial-first cardiac catheterization laboratory

Energy Technology Data Exchange (ETDEWEB)

Gunja, Ateka; Pandey, Yagya [Department of Veterans Affairs, Jesse Brown VA Medical Center, Chicago, IL (United States); Division of Cardiology, Department of Medicine, University of Illinois at Chicago, Chicago, IL (United States); Xie, Hui [Division of Epidemiology and Biostatistics, University of Illinois at Chicago, Chicago, IL (United States); Faculty of Health Sciences, Simon Fraser University, Burnaby, BC (Canada); Wolska, Beata M. [Department of Physiology and Biophysics, Center for Cardiovascular Research, University of Illinois at Chicago, Chicago, IL (United States); Shroff, Adhir R.; Ardati, Amer K. [Department of Veterans Affairs, Jesse Brown VA Medical Center, Chicago, IL (United States); Division of Cardiology, Department of Medicine, University of Illinois at Chicago, Chicago, IL (United States); Vidovich, Mladen I., E-mail: miv@uic.edu [Department of Veterans Affairs, Jesse Brown VA Medical Center, Chicago, IL (United States); Division of Cardiology, Department of Medicine, University of Illinois at Chicago, Chicago, IL (United States)

2017-04-15

Background: Transradial coronary angiography (TRA) has been associated with increased radiation doses. We hypothesized that contemporary image noise reduction technology would reduce radiation doses in the cardiac catheterization laboratory in a typical clinical setting. Methods and results: We performed a single-center, retrospective analysis of 400 consecutive patients who underwent diagnostic and interventional cardiac catheterizations in a predominantly TRA laboratory with traditional fluoroscopy (N = 200) and a new image noise reduction fluoroscopy system (N = 200). The primary endpoint was radiation dose (mGy cm{sup 2}). Secondary endpoints were contrast dose, fluoroscopy times, number of cineangiograms, and radiation dose by operator between the two study periods. Radiation was reduced by 44.7% between the old and new cardiac catheterization laboratory (75.8 mGy cm{sup 2} ± 74.0 vs. 41.9 mGy cm{sup 2} ± 40.7, p < 0.0001). Radiation was reduced for both diagnostic procedures (45.9%, p < 0.0001) and interventional procedures (37.7%, p < 0.0001). There was no statistically significant difference in radiation dose between individual operators (p = 0.84). In multivariate analysis, radiation dose remained significantly decreased with the use of the new system (p < 0.0001) and was associated with weight (p < 0.0001), previous coronary artery bypass grafting (p < 0.0007) and greater than 3 stents used (p < 0.0004). TRA was used in 90% of all cases in both periods. Compared with a transfemoral approach (TFA), TRA was not associated with higher radiation doses (p = 0.20). Conclusions: Image noise reduction technology significantly reduces radiation dose in a contemporary radial-first cardiac catheterization clinical practice. - Highlights: • Radial arterial access has been associated with higher doses compared to femoral access. • In a radial-first cardiac catheterization laboratory (90% radial) we examined radiation doses reduction with a contemporary image

Image noise reduction technology reduces radiation in a radial-first cardiac catheterization laboratory

International Nuclear Information System (INIS)

Gunja, Ateka; Pandey, Yagya; Xie, Hui; Wolska, Beata M.; Shroff, Adhir R.; Ardati, Amer K.; Vidovich, Mladen I.

2017-01-01

Background: Transradial coronary angiography (TRA) has been associated with increased radiation doses. We hypothesized that contemporary image noise reduction technology would reduce radiation doses in the cardiac catheterization laboratory in a typical clinical setting. Methods and results: We performed a single-center, retrospective analysis of 400 consecutive patients who underwent diagnostic and interventional cardiac catheterizations in a predominantly TRA laboratory with traditional fluoroscopy (N = 200) and a new image noise reduction fluoroscopy system (N = 200). The primary endpoint was radiation dose (mGy cm"2). Secondary endpoints were contrast dose, fluoroscopy times, number of cineangiograms, and radiation dose by operator between the two study periods. Radiation was reduced by 44.7% between the old and new cardiac catheterization laboratory (75.8 mGy cm"2 ± 74.0 vs. 41.9 mGy cm"2 ± 40.7, p < 0.0001). Radiation was reduced for both diagnostic procedures (45.9%, p < 0.0001) and interventional procedures (37.7%, p < 0.0001). There was no statistically significant difference in radiation dose between individual operators (p = 0.84). In multivariate analysis, radiation dose remained significantly decreased with the use of the new system (p < 0.0001) and was associated with weight (p < 0.0001), previous coronary artery bypass grafting (p < 0.0007) and greater than 3 stents used (p < 0.0004). TRA was used in 90% of all cases in both periods. Compared with a transfemoral approach (TFA), TRA was not associated with higher radiation doses (p = 0.20). Conclusions: Image noise reduction technology significantly reduces radiation dose in a contemporary radial-first cardiac catheterization clinical practice. - Highlights: • Radial arterial access has been associated with higher doses compared to femoral access. • In a radial-first cardiac catheterization laboratory (90% radial) we examined radiation doses reduction with a contemporary image-noise compared to

Reducing falls and improving mobility in multiple sclerosis.

Science.gov (United States)

Sosnoff, Jacob J; Sung, JongHun

2015-06-01

Falls are common in persons with multiple sclerosis (MS), and are related to physical injury and reduce the quality of life. Mobility impairments are a significant risk factor for falls in persons with MS. Although there is evidence that mobility in persons with MS can be improved with rehabilitation, much less is known about fall prevention. This review focuses on fall prevention in persons with MS. Ten fall prevention interventions consisting of 524 participants with a wide range of disability were systematically identified. Nine of the 10 investigations report a reduction in falls and/or proportion of fallers following treatment. The vast majority observed an improvement in balance that co-occurred with the reduction in falls. Methodological limitations preclude any firm conclusions. Numerous gaps in the understanding of fall prevention in persons with MS are discussed. Well-designed randomized control trials targeting mobility and falls are warranted.

Fixed Wing Project: Technologies for Advanced Air Transports

Science.gov (United States)

Del Rosario, Ruben; Koudelka, John M.; Wahls, Richard A.; Madavan, Nateri

2014-01-01

The NASA Fundamental Aeronautics Fixed Wing (FW) Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. Multidisciplinary advances are required in aerodynamic efficiency to reduce drag, structural efficiency to reduce aircraft empty weight, and propulsive and thermal efficiency to reduce thrust-specific energy consumption (TSEC) for overall system benefit. Additionally, advances are required to reduce perceived noise without adversely affecting drag, weight, or TSEC, and to reduce harmful emissions without adversely affecting energy efficiency or noise.The presentation will highlight the Fixed Wing project vision of revolutionary systems and technologies needed to achieve these challenging goals. Specifically, the primary focus of the FW Project is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe.

PVMaT Improvements in the BP Solar Photovoltaic Module Manufacturing Technology: Final Subcontract Report, 4 May 1998 - 30 November 2001

Energy Technology Data Exchange (ETDEWEB)

Wohlgemuth, J.; Shea, S.

2002-04-01

This report describes the advancement of BP Solar PV manufacturing technologies in order to design and implement a process that produces polycrystalline silicon PV modules that can be sold profitably for $2.00 per peak watt or less and that increases the production capacity of the Frederick plant to at least 25 megawatts per year. Achieving these major objectives was based on meeting the following specific task goals: (1) Develop a process to produce silicon feedstock from Na2SiF6 that can be sold profitably for less than $15/kilogram in large quantities. Demonstrate the process in a pilot facility. (2) Optimize and improve control of the casting process to increase the process yield by 7% and to improve material quality such that average cell efficiency increases by 4%. (3) Reduce the center-to-center cut distance on the wire saw to less than 450?mm in production, and develop a wire saw process that reduces the consumable costs by at least $0.05/wafer, that does not require organic cleaners, nor result in generation of hazardous waste material. (4) Develop, demonstrate, and implement a cost-effective cell process that produces a minimum average cell efficiency of 15% and improves the cell line electrical yield by 5% when applied to BP Solar cast polycrystalline silicon wafers. (5) Develop and qualify an encapsulation system that meets all technical and reliability requirements and can be laminated and cured in less than 6 minutes. (6) Improve BP Solar's product and materials handling to increase line yield by 3% and reduce handling labor to save $0.05/watt. (6) Improve process measurement and control in the production line to improve yield by 3% and reduce rework by 50%.

Technological improvements to high temperature thermocouples for nuclear reactor applications

International Nuclear Information System (INIS)

Schley, R.; Leveque, J.P.

1980-07-01

The specific operating conditions of thermocouples in nuclear reactors have provided an incentive for further advances in high temperature thermocouple applications and performance. This work covers the manufacture and improvement of existing alloys, the technology of clad thermocouples, calibration drift during heat treatment, resistance to thermal shock and the compatibility of insulating materials with thermo-electric alloys. The results lead to specifying improved operating conditions for thermocouples in nuclear reactor media (pressurized water, sodium, uranium oxide) [fr

Highly Polluted Wastewaters Treatment by Improved Dissolved Air Flotation Technology

Science.gov (United States)

Moga, I. C.; Covaliu, C. I.; Matache, M. G.; Doroftei, B. I.

2017-06-01

Numerous investigations are oriented towards the development of new wastewater treatment technologies, having high efficiencies for removing even low concentrations of pollutants found in water. These efforts were determined by the destroyer impact of the pollutants to the environment and human’s health. For this reason this paper presents our study concerning an improved dissolved air flotation technology for wastewater treatment. There is described a dissolved air flotation (DAF) installation composed by two equipments: pressurized capsule and lamellar settling. Also, there are presented some advantages of using nanoparticles as flotation collectors.

HI-STAR. Health Improvements Through Space Technologies and Resources: Final Report

Science.gov (United States)

Finarelli, Margaret G.

2002-01-01

The purpose of this document is to describe a global strategy to integrate the use of space technology in the fight against malaria. Given the well-documented relationship between the vector and its environment, and the ability of existing space technologies to monitor environmental factors, malaria is a strong candidate for the application of space technology. The concept of a malaria early warning system has been proposed in the past' and pilot studies have been conducted. The HI-STAR project (Health Improvement through Space Technologies and Resources) seeks to build on this concept and enhance the space elements of the suggested framework. As such, the mission statement for this International Space University design project has been defined as follows: "Our mission is to develop and promote a global strategy to help combat malaria using space technology". A general overview of malaria, aspects of how space technology can be useful, and an outline of the HI-STAR strategy is presented.

Connected Vehicle Technologies for Efficient Urban Transportation

Science.gov (United States)

2016-10-24

Connected vehicle technology is employed to optimize the vehicle's control system in real-time to reduce congestion, improve fuel economy, and reduce emissions. This project's goal was to develop a two-way communication system to upload vehicle data ...

Improvement of the Provisions of Innovative Development of Enterprises Based on Electronic Business Technologies

Directory of Open Access Journals (Sweden)

Vilkhivska Olga V.

2018-02-01

Full Text Available The article proposes improved conceptual provisions of innovative enterprise development based on the introduction of e-business technologies. The peculiarities of modern conditions of economic development under the influence of the new information paradigm are considered, the essence of which is the development and implementation of innovative network technologies (technologies of e-business in all spheres and branches of the economy. An analysis of the author’s research on the trends in the development of e-business, e-commerce, marketing, the impact of Internet technologies on business practices has been carried out, which has made it possible to achieve the goal, that was set, namely, to improve the conceptual foundations of innovative enterprise development based on e-business technologies. A special feature of the developed provisions is the emphasis on the introduction or full replacement of business processes in the enterprise by the appropriate technologies of electronic business and establishing the relationship between innovation development and their use.

Artificial Walking Technologies to Improve Gait in Cerebral Palsy: Multichannel Neuromuscular Stimulation.

Science.gov (United States)

Rose, Jessica; Cahill-Rowley, Katelyn; Butler, Erin E

2017-11-01

Cerebral palsy (CP) is the most common childhood motor disability and often results in debilitating walking abnormalities, such as flexed-knee and stiff-knee gait. Current medical and surgical treatments are only partially effective in improving gait abnormalities and may cause significant muscle weakness. However, emerging artificial walking technologies, such as step-initiated, multichannel neuromuscular electrical stimulation (NMES), can substantially improve gait patterns and promote muscle strength in children with spastic CP. NMES may also be applied to specific lumbar-sacral sensory roots to reduce spasticity. Development of tablet computer-based multichannel NMES can leverage lightweight, wearable wireless stimulators, advanced control design, and surface electrodes to activate lower-limb muscles. Musculoskeletal models have been used to characterize muscle contributions to unimpaired gait and identify high muscle demands, which can help guide multichannel NMES-assisted gait protocols. In addition, patient-specific NMES-assisted gait protocols based on 3D gait analysis can facilitate the appropriate activation of lower-limb muscles to achieve a more functional gait: stance-phase hip and knee extension and swing-phase sequence of hip and knee flexion followed by rapid knee extension. NMES-assisted gait treatment can be conducted as either clinic-based or home-based programs. Rigorous testing of multichannel NMES-assisted gait training protocols will determine optimal treatment dosage for future clinical trials. Evidence-based outcome evaluation using 3D kinematics or temporal-spatial gait parameters will help determine immediate neuroprosthetic effects and longer term neurotherapeutic effects of step-initiated, multichannel NMES-assisted gait in children with spastic CP. Multichannel NMES is a promising assistive technology to help children with spastic CP achieve a more upright, functional gait. © 2017 International Center for Artificial Organs and

Improving the technology of purification of gas emissions petrochemical industries

OpenAIRE

USMANOVA R.R.; ZAIKOV G.E.

2014-01-01

The technology of cleaning of gas emissions flares in the production of synthetic rubber. Developed dynamic scrubber for scrubbing gas emissions. Complex studies served as the basis for the design of an air purification system of industrial premises. Purification of gas emissions before combustion in flares has significantly reduced air pollution by toxic substances.

Improvement of Inquiry in a Complex Technology-Enhanced Learning Environment

NARCIS (Netherlands)

Pedaste, Margus; Kori, Külli; Maeots, Mario; de Jong, Anthonius J.M.; Riopel, Martin; Smyrnaiou, Zacharoula

2016-01-01

Inquiry learning is an effective approach in science education. Complex technology-enhanced learning environments are needed to apply inquiry worldwide to support knowledge gain and improvement of inquiry skills. In our study, we applied an ecology mission in the SCY-Lab learning environment and

Enabling technologies for industrial energy demand management

International Nuclear Information System (INIS)

Dyer, Caroline H.; Hammond, Geoffrey P.; Jones, Craig I.; McKenna, Russell C.

2008-01-01

This state-of-science review sets out to provide an indicative assessment of enabling technologies for reducing UK industrial energy demand and carbon emissions to 2050. In the short term, i.e. the period that will rely on current or existing technologies, the road map and priorities are clear. A variety of available technologies will lead to energy demand reduction in industrial processes, boiler operation, compressed air usage, electric motor efficiency, heating and lighting, and ancillary uses such as transport. The prospects for the commercial exploitation of innovative technologies by the middle of the 21st century are more speculative. Emphasis is therefore placed on the range of technology assessment methods that are likely to provide policy makers with a guide to progress in the development of high-temperature processes, improved materials, process integration and intensification, and improved industrial process control and monitoring. Key among the appraisal methods applicable to the energy sector is thermodynamic analysis, making use of energy, exergy and 'exergoeconomic' techniques. Technical and economic barriers will limit the improvement potential to perhaps a 30% cut in industrial energy use, which would make a significant contribution to reducing energy demand and carbon emissions in UK industry. Non-technological drivers for, and barriers to, the take-up of innovative, low-carbon energy technologies for industry are also outlined

Hybrid Vehicle Technologies and their potential for reducing oil use

Science.gov (United States)

German, John

2006-04-01

Vehicles with hybrid gasoline-electric powertrains are starting to gain market share. Current hybrid vehicles add an electric motor, battery pack, and power electronics to the conventional powertrain. A variety of engine/motor configurations are possible, each with advantages and disadvantages. In general, efficiency is improved due to engine shut-off at idle, capture of energy during deceleration that is normally lost as heat in the brakes, downsizing of the conventional engine, and, in some cases, propulsion on the electric motor alone. Ongoing increases in hybrid market share are dependent on cost reduction, especially the battery pack, efficiency synergies with other vehicle technologies, use of the high electric power to provide features desired by customers, and future fuel price and availability. Potential barriers include historically low fuel prices, high discounting of the fuel savings by new vehicle purchasers, competing technologies, and tradeoffs with other factors desired by customers, such as performance, utility, safety, and luxury features.

Improving CANDU plant operation and maintenance through retrofit information technology systems

International Nuclear Information System (INIS)

Lupton, L.R.; Judd, R.A.; MacBeth, M.J.

1998-01-01

CANDU plant owners are facing an increasingly competitive environment for the generation of electricity. To meet this challenge, all owners have identified that information technology offers opportunities for significant improvements in CANDU operation, maintenance and administration (OM and A) costs. Targeted information technology application areas include instrumentation and control, engineering, construction, operations and plant information management. These opportunities also pose challenges and issues that must be addressed if the full benefits of the advances in information technology are to be achieved. Key among these are system hardware and software maintenance, and obsolescence protection; AECL has been supporting CANDU stations with the initial development and evaluation of systems to improve plant performance and cost. Key initiatives that have been implemented or are in the process of being implemented in some CANDU plants to achieve operational benefits include: critical safety parameter monitor system; advanced computerized annunciation system; plant historical data system; and plant display system. Each system will be described in terms of its role in enhancing current CANDU plant performance and how they will contribute to future CANDU plant performance

Market Integration, Choice of Technology and Welfare

DEFF Research Database (Denmark)

Hansen, Jørgen Drud; Nielsen, Jørgen Ulff-Møller

2010-01-01

technologies. Market integration may induce a technological restructuring where firms either diversify their technologies or switch to a homogeneous technology. In general, market integration improves welfare. However, a small decrease of trade costs which induces a switch from heterogeneous technologies...... to a homogeneous technology may locally reduce global welfare. The model also shows that productivity differences lead to intra-industry firm heterogeneity in size and exports similar to the "new-new" trade models with monopolistic competition....

Effects of Comprehensive Technologies on the Improvement of Acidified Vineyard Soils

Science.gov (United States)

Jiang, Hongguo; Wang, Qiunan; Xu, Feng; Jin, Jun; Wang, Guoyu; Liu, Jianguo

2018-01-01

Soil acidification is an important factor that restricts the yield and quality of fruits. In this study, the comprehensive improving technologies were applied on the vineyards in which the soil pH is below 5.5. The technologies include application of soil conditioner, organic fertilizer and bacterial manure, and growth of green manure and natural grass. The results show that the comprehensive improving technologies can raise the pH of 0-15 cm soil layer by 0.5-0.8 unit and the pH of 15-30 cm soil layer by 0.3-0.6 unit. The soil bulk densities are decreased by 0.77-10.42%. The contents of organic matter, total N, available P and K in the soils are all increased. Therefore, the soil fertilities are improved. The yields of grape fruits are increased by 12.77-14.94%, and the contents of soluble solid in the grapes are raised by 7.01-9.55%, by the comprehensive measure of seaweed liquid silicon plus sheep manure plus growth of green manure. The comprehensive measure of soil conditioner Naduoli No. 1 plus bacterial manure plus natural grass increases the yields of grape by 7.67%, raises the content of soluble solid in the grape by 8.6%. But the effect of the comprehensive measure of unslaked lime plus sheep manure plus growth of green manure is not clear.

A Measurement Management Technology for Improving Energy Efficiency in Data Centers and Telecommunication Facilities

Energy Technology Data Exchange (ETDEWEB)

Hendrik Hamann, Levente Klein

2012-06-28

Data center (DC) electricity use is increasing at an annual rate of over 20% and presents a concern for the Information Technology (IT) industry, governments, and the society. A large fraction of the energy use is consumed by the compressor cooling to maintain the recommended operating conditions for IT equipment. The most common way to improve the DC efficiency is achieved by optimally provisioning the cooling power to match the global heat dissipation in the DC. However, at a more granular level, the large range of heat densities of today's IT equipment makes the task of provisioning cooling power optimized to the level of individual computer room air conditioning (CRAC) units much more challenging. Distributed sensing within a DC enables the development of new strategies to improve energy efficiency, such as hot spot elimination through targeted cooling, matching power consumption at rack level with workload schedule, and minimizing power losses. The scope of Measurement and Management Technologies (MMT) is to develop a software tool and the underlying sensing technology to provide critical decision support and control for DC and telecommunication facilities (TF) operations. A key aspect of MMT technology is integration of modeling tools to understand how changes in one operational parameter affect the overall DC response. It is demonstrated that reduced ordered models for DC can generate, in less than 2 seconds computational time, a three dimensional thermal model in a 50 kft{sup 2} DC. This rapid modeling enables real time visualization of the DC conditions and enables 'what if' scenarios simulations to characterize response to 'disturbances'. One such example is thermal zone modeling that matches the cooling power to the heat generated at a local level by identifying DC zones cooled by a specific CRAC. Turning off a CRAC unit can be simulated to understand how the other CRAC utilization changes and how server temperature responds

Advanced technology heavy water monitors offering reduced implementation costs

International Nuclear Information System (INIS)

Kalechstein, W.; Hippola, K.B.

1984-10-01

The development of second generation heavy water monitors for use at CANDU power stations and heavy water plants has been completed and the instruments brought to the stage of commercial availability. Applications of advanced technology and reduced utilization of custom manufactured components have together resulted in instruments that are less expensive to produce than the original monitors and do not require costly station services. The design has been tested on two prototypes and fully documented, including the inspection and test procedures required for manufacture to the CSA Z299.3 quality verfication program standard. Production of the new monitors by a commercial vendor (Barringer Research Ltd.) has begun and the first instrument is scheduled for delivery to CRNL's NRU reactor in late 1984

Enhancing performance and reducing stress in sports technological advances

CERN Document Server

Ivancevic, Tijana; Greenberg, Ronald

2015-01-01

This book is designed to help athletes and individuals interested in high sports performance in their journey towards the perfection of human sports abilities and achievements. It has two main goals: accelerating the acquisition of motor skills and preparing and vigilantly reducing the recovery time after training and competition. The Diamond Sports Protocol (DSP) presents state-of-the-art techniques for current sport and health technologies, particularly neuromuscular electrical stimulation (Sports Wave), oxygen infusion (Oxy Sports), infrared (Sports Infrared Dome) and lactic acid cleaning (Turbo Sports). The book suggest DSP as an essential part of every future athlete's training, competition and health maintenance. The book is for everyone interested in superior sports performance, fast and effective rehabilitation from training and competition and sports injury prevention.

Usability of Particle Film Technology and Water Holding Materials to Improve Drought Tolerance in Gossypium hirsutum L. Plants

Science.gov (United States)

Roy, K.; Zwieniecki, M.

2017-12-01

Cotton (Gossypium hirsutum L.) is relatively drought resistant and thus is planted widely in many semi-arid and arid parts of the world, many of which are usually deprived of modern water management technologies. Since the productivity of cotton plants depends on water availability, we carried out the present research aiming at testing two different low cost and arid-environment friendly water efficient techniques: application of particle film technology on leaves to reduce the transpiration rate (kaolin dust), and use of organic material to improve the soil water holding capacity (cotton wool). In details, kaolin (3% and 5%; weight:volume) mixed in water was sprayed on the upper surface of the leaves of young plants, and small amounts of cotton wool (0.1%, 0.3% and 0.5%; weight:weight) were mixed into the soils. The study showed that kaolin spray was useful as a transpiration reducing agent only if plants have adequate water in the soil (well irrigated) but not under water stress conditions. In addition, mixing a small amount of cotton wool into the soil can significantly increase the amount of water available to the plants, and extend the benefit of kaolin application on plants.

Branching innovation, recombinant innovation, and endogenous technological transitions

NARCIS (Netherlands)

Frenken, K.; Izquierdo, L.; Zeppini, P.

2012-01-01

We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

The Value of Harmonizing Multiple Improvement Technologies: A Process Improvement Professional’s View

Science.gov (United States)

2008-03-01

maturity models and ISO standards, specifically CMMI, CMMI-ACQ and ISO 12207 . Also, the improvement group supplemented their selection of these...compliant with the technologies and standards that are important to the business. Lockheed Martin IS&GS has integrated CMMI, EIA 632, ISO 12207 , and Six...geographically dispersed organization. [Siviy 07-1] Northrop Grumman Mission Systems has integrated CMMI, ISO 9001, AS9100, and Six Sigma, as well as a

Advanced technology for nuclear powerplants

International Nuclear Information System (INIS)

Rohm, H.H.

1987-01-01

Advanced technology offers significant potential benefit to the nuclear industry. Improvements can be anticipated in plant performance, reliability, and overall plant safety as well as reduced life cycle costs. Utilizing artificial intelligence and expert systems, robotics, advanced instruments and controls, and modularization technologies can enhance plant operations and provide new insights and perspectives to plant risk and thus focus resources to areas of importance. Plant reliability, operability, availability, accident interdiction and limitation, and plant recovery are expected to improve. However, utilizing these technologies is not an automatic process. In addition to the actual costs associated with developing and implementing the technologies, operator training and acceptance represents a potential significant problem. Traditional plant operators have little or no experience with computer technology. There has already been some difficulty getting nuclear plant operators to accept and use the new technologies that have been implemented to accept and use the new technologies that have been implemented thus far

Technology-based self-care methods of improving antiretroviral adherence: a systematic review.

Directory of Open Access Journals (Sweden)

Parya Saberi

Full Text Available As HIV infection has shifted to a chronic condition, self-care practices have emerged as an important topic for HIV-positive individuals in maintaining an optimal level of health. Self-care refers to activities that patients undertake to maintain and improve health, such as strategies to achieve and maintain high levels of antiretroviral adherence.Technology-based methods are increasingly used to enhance antiretroviral adherence; therefore, we systematically reviewed the literature to examine technology-based self-care methods that HIV-positive individuals utilize to improve adherence. Seven electronic databases were searched from 1/1/1980 through 12/31/2010. We included quantitative and qualitative studies. Among quantitative studies, the primary outcomes included ARV adherence, viral load, and CD4+ cell count and secondary outcomes consisted of quality of life, adverse effects, and feasibility/acceptability data. For qualitative/descriptive studies, interview themes, reports of use, and perceptions of use were summarized. Thirty-six publications were included (24 quantitative and 12 qualitative/descriptive. Studies with exclusive utilization of medication reminder devices demonstrated less evidence of enhancing adherence in comparison to multi-component methods.This systematic review offers support for self-care technology-based approaches that may result in improved antiretroviral adherence. There was a clear pattern of results that favored individually-tailored, multi-function technologies, which allowed for periodic communication with health care providers rather than sole reliance on electronic reminder devices.

Measuring and improving patient safety through health information technology: The Health IT Safety Framework.

Science.gov (United States)

Singh, Hardeep; Sittig, Dean F

2016-04-01

Health information technology (health IT) has potential to improve patient safety but its implementation and use has led to unintended consequences and new safety concerns. A key challenge to improving safety in health IT-enabled healthcare systems is to develop valid, feasible strategies to measure safety concerns at the intersection of health IT and patient safety. In response to the fundamental conceptual and methodological gaps related to both defining and measuring health IT-related patient safety, we propose a new framework, the Health IT Safety (HITS) measurement framework, to provide a conceptual foundation for health IT-related patient safety measurement, monitoring, and improvement. The HITS framework follows both Continuous Quality Improvement (CQI) and sociotechnical approaches and calls for new measures and measurement activities to address safety concerns in three related domains: 1) concerns that are unique and specific to technology (e.g., to address unsafe health IT related to unavailable or malfunctioning hardware or software); 2) concerns created by the failure to use health IT appropriately or by misuse of health IT (e.g. to reduce nuisance alerts in the electronic health record (EHR)), and 3) the use of health IT to monitor risks, health care processes and outcomes and identify potential safety concerns before they can harm patients (e.g. use EHR-based algorithms to identify patients at risk for medication errors or care delays). The framework proposes to integrate both retrospective and prospective measurement of HIT safety with an organization's existing clinical risk management and safety programs. It aims to facilitate organizational learning, comprehensive 360 degree assessment of HIT safety that includes vendor involvement, refinement of measurement tools and strategies, and shared responsibility to identify problems and implement solutions. A long term framework goal is to enable rigorous measurement that helps achieve the safety

Communication Styles of Interactive Tools for Self-Improvement

OpenAIRE

Niess, Jasmin; Diefenbach, Sarah

2016-01-01

Background Interactive products for self-improvement (e.g., online trainings to reduce stress, fitness gadgets) have become increasingly popular among consumers and healthcare providers. In line with the idea of positive computing, these tools aim to support their users on their way to improved well-being and human flourishing. As an interdisciplinary domain, the design of self-improvement technologies requires psychological, technological, and design expertise. One needs to know how to suppo...

Technological development in the fruit and vegetable industry: A property rights perspective

DEFF Research Database (Denmark)

Plichta, Kirsten

within the production-cost-minimization path can be easily understood from an artefact perspective of technology, while the transaction-cost-minimization path requires a supplementary perspective which can be found within theories on transaction costs. 3) The set of technological opportunities underlying...... the production-cost-minimization path consists of opportunities for improving the efficiency of firms' processing technology and opportunities for optimizing the cultivation and harvesting of the crops used in processing. 4) Firms' incentives for technological development of the opportunities underlying...... of the production processes, development of measures and measurement technology, and sorting techniques for reducing quality variations in the final products, including reducing quality variations by improving crop and harvesting methods. 6) Firms' and farmers' incentives for technological development...

Solid oxide fuel cell technology coupled with methane dry reforming: A viable option for high efficiency plant with reduced CO2 emissions

International Nuclear Information System (INIS)

Barelli, L.; Ottaviano, A.

2014-01-01

Nowadays the control of greenhouse gas is probably the most challenging environmental policy issue. Since CO 2 is considered the major greenhouse gas (GHG) that contributes to the global warming, enforcing technological strategies aiming to avoid or reuse CO 2 emissions becomes crucial, in order to mitigate GHG environmental impact. Currently, solutions conventionally adopted to this purpose are carbon capture and storage (CCS) technologies. In this context, instead, the followed strategy aims to further improvements in energetic conversion efficiency with related reduced specific CO 2 emissions (per produced kWh e ). Therefore, with particular reference to the electric power generation, this paper proposes an innovative energy conversion system, based on solid oxide fuel cell (SOFC), characterized by higher efficiency and reduced CO 2 emission factor respect to an analogous conventional energy plant. In particular, the innovative solution consists of combining SOFC to methane dry reforming technology, while the conventional system refers to steam methane reforming-SOFC coupling. The innovative system performance up to 65% electric efficiency as cited in the paper, was validated through simulations carried out in Aspen Plus environment. - Highlights: • An innovative high efficiency plant with low CO 2 emissions is presented. • The new solution combined SOFC to methane dry reforming technology (CDR–SOFC). • A comparison between CDR–SOFC and SMR–SOFC system was carried out in Aspen Plus. • CDR–SOFC efficiency is greater of 6.4% percentage points respect to SMR–SOFC. • A CO 2 emission factor reduction of about 10% was achieved by CDR–SOFC plant

Mindfulness meditation improves emotion regulation and reduces drug abuse.

Science.gov (United States)

Tang, Yi-Yuan; Tang, Rongxiang; Posner, Michael I

2016-06-01

The core clinical symptoms of addiction include an enhanced incentive for drug taking (craving), impaired self-control (impulsivity and compulsivity), emotional dysregulation (negative mood) and increased stress reactivity. Symptoms related to impaired self-control involve reduced activity in anterior cingulate cortex (ACC), adjacent prefrontal cortex (mPFC) and other brain areas. Behavioral training such as mindfulness meditation can increase the function of control networks including those leading to improved emotion regulation and thus may be a promising approach for the treatment of addiction. In a series of randomized controlled trials (RCTs), we tested whether increased ACC/mPFC activity is related to better self-control abilities in executive functions, emotion regulation and stress response in healthy and addicted populations. After a brief mindfulness training (Integrative Body-Mind Training, IBMT), we used the Positive and Negative Affect Schedule (PANAS) and Profile of Mood States (POMS) to measure emotion regulation, salivary cortisol for the stress response and fMRI for brain functional and DTI structural changes. Relaxation training was used to serve as an active control. In both smokers and nonsmokers, improved self-control abilities in emotion regulation and stress reduction were found after training and these changes were related to increased ACC/mPFC activity following training. Compared with nonsmokers, smokers showed reduced ACC/mPFC activity in the self-control network before training, and these deficits were ameliorated after training. These results indicate that promoting emotion regulation and improving ACC/mPFC brain activity can help for addiction prevention and treatment. Copyright © 2016 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Instrumentation Technologies for Improving an Irradiation Testing of Nuclear Fuels and Materials at the HANARO

International Nuclear Information System (INIS)

Kim, Bong Goo; Park, Sung Jae; Choo, Ki Nam

2011-01-01

Over 50 years of nuclear fuels and materials irradiation testing has led to many countries developing significant improvements in instrumentation to monitor physical parameters and to control the test conditions in Materials Test Reactors (MTRs) or research reactors. Recent effort to deploy new fuels and materials in existing and advanced reactors has increased the demand for well-instrumented irradiation tests. Specifically, demand has increased for tests with sensors capable of providing real-time measurement of key parameters, such as temperature, geometry changes, thermal conductivity, fission gas release, cracking, coating buildup, thermal and fast flux, etc. This review paper documents the current state of instrumentation technologies in MTRs in the world and summarizes on-going research efforts to deploy new sensors. There is increased interest to irradiate new materials and reactor fuels for advanced PWRs and the Gen-IV reactor systems, such as SFRs (Sodium-cooled Fast Reactors), VHTRs (Very-High-Temperature Reactors), SCWRs (Supercritical-Water-cooled Reactors) and GFRs (Gas-cooled Fast Reactor). This review documents the current state of instrumentation technologies in MTRs in the world, identifies challenges faced by previous testing methods and how these challenges were overcome. A wide range of sensors are available to measure key parameters of interest during fuels and materials irradiations in MTRs. Such sensors must be reliable, small size, highly accurate, and able to withstand harsh conditions. On-going development efforts are focusing on providing MTR users a wider range of parameter measurements with increased accuracy. In addition, development efforts are focusing on reducing the impact of sensor on measurements by reducing sensor size. This report includes not only status of instrumentation using research reactors in the world to irradiate nuclear fuels and materials but also future directions relating to instrumentation technologies for

Digital Sensor Technology

Energy Technology Data Exchange (ETDEWEB)

Thomas, Ken D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Quinn, Edward L. [Technology Resources, Dana Point, CA (United States); Mauck, Jerry L. [Technology Resources, Dana Point, CA (United States); Bockhorst, Richard M. [Technology Resources, Dana Point, CA (United States)

2015-02-01

The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy and reliability. This paper, which refers to a final report issued in 2013, demonstrates these benefits in direct comparisons of digital and analog sensor applications. Improved accuracy results from the superior operating characteristics of digital sensors. These include improvements in sensor accuracy and drift and other related parameters which reduce total loop uncertainty and thereby increase safety and operating margins. An example instrument loop uncertainty calculation for a pressure sensor application is presented to illustrate these improvements. This is a side-by-side comparison of the instrument loop uncertainty for both an analog and a digital sensor in the same pressure measurement application. Similarly, improved sensor reliability is illustrated with a sample calculation for determining the probability of failure on demand, an industry standard reliability measure. This looks at equivalent analog and digital temperature sensors to draw the comparison. The results confirm substantial reliability improvement with the digital sensor, due in large part to ability to continuously monitor the health of a digital sensor such that problems can be immediately identified and corrected. This greatly reduces the likelihood of a latent failure condition of the sensor at the time of a design basis event. Notwithstanding the benefits of digital sensors, there are certain qualification issues that are inherent with digital technology and these are described in the report. One major qualification impediment for digital sensor implementation is software common cause failure (SCCF).

Essays in energy, environment and technological change

Science.gov (United States)

Zhou, Yichen Christy

This dissertation studies technological change in the context of energy and environmental economics. Technology plays a key role in reducing greenhouse gas emissions from the transportation sector. Chapter 1 estimates a structural model of the car industry that allows for endogenous product characteristics to investigate how gasoline taxes, R&D subsidies and competition affect fuel efficiency and vehicle prices in the medium-run, both through car-makers' decisions to adopt technologies and through their investments in knowledge capital. I use technology adoption and automotive patents data for 1986-2006 to estimate this model. I show that 92% of fuel efficiency improvements between 1986 and 2006 were driven by technology adoption, while the role of knowledge capital is largely to reduce the marginal production costs of fuel-efficient cars. A counterfactual predicts that an additional 1/gallon gasoline tax in 2006 would have increased the technology adoption rate, and raised average fuel efficiency by 0.47 miles/gallon, twice the annual fuel efficiency improvement in 2003-2006. An R&D subsidy that would reduce the marginal cost of knowledge capital by 25% in 2006 would have raised investment in knowledge capital. This subsidy would have raised fuel efficiency only by 0.06 miles/gallon in 2006, but would have increased variable profits by 2.3 billion over all firms that year. Passenger vehicle fuel economy standards in the United States will require substantial improvements in new vehicle fuel economy over the next decade. Economic theory suggests that vehicle manufacturers adopt greater fuel-saving technologies for vehicles with larger market size. Chapter 2 documents a strong connection between market size, measured by sales, and technology adoption. Using variation consumer demographics and purchasing pattern to account for the endogeneity of market size, we find that a 10 percent increase in market size raises vehicle fuel efficiency by 0.3 percent, as compared

Improving Technology in Agriscience Classrooms

Science.gov (United States)

Morris, Krista

2014-01-01

Teachers must make persistent efforts in integrating technology in the classroom. In Georgia agriscience curriculum, no data are available regarding the type and amount of technology integration used in the classrooms. Some teachers integrate actively while others incorporate very little technology in their teaching. The purpose of this…

Advanced technologies for improved expression of recombinant proteins in bacteria: perspectives and applications.

Science.gov (United States)

Gupta, Sanjeev K; Shukla, Pratyoosh

2016-12-01

Prokaryotic expression systems are superior in producing valuable recombinant proteins, enzymes and therapeutic products. Conventional microbial technology is evolving gradually and amalgamated with advanced technologies in order to give rise to improved processes for the production of metabolites, recombinant biopharmaceuticals and industrial enzymes. Recently, several novel approaches have been employed in a bacterial expression platform to improve recombinant protein expression. These approaches involve metabolic engineering, use of strong promoters, novel vector elements such as inducers and enhancers, protein tags, secretion signals, high-throughput devices for cloning and process screening as well as fermentation technologies. Advancement of the novel technologies in E. coli systems led to the production of "difficult to express" complex products including small peptides, antibody fragments, few proteins and full-length aglycosylated monoclonal antibodies in considerable large quantity. Wacker's secretion technologies, Pfenex system, inducers, cell-free systems, strain engineering for post-translational modification, such as disulfide bridging and bacterial N-glycosylation, are still under evaluation for the production of complex proteins and peptides in E. coli in an efficient manner. This appraisal provides an impression of expression technologies developed in recent times for enhanced production of heterologous proteins in E. coli which are of foremost importance for diverse applications in microbiology and biopharmaceutical production.

Coal-oil coprocessing at HTI - development and improvement of the technology

Energy Technology Data Exchange (ETDEWEB)

Stalzer, R.H.; Lee, L.K.; Hu, J.; Comolli, A. [Hydrocarbon Technologies, Inc., Lawrenceville, NJ (United States)

1995-12-31

Co-Processing refers to the combined processing of coal and petroleum-derived heavy oil feedstocks. The coal feedstocks used are those typically utilized in direct coal liquefaction: bituminous, subbituminous, and lignites. Petroleum-derived oil, is typically a petroleum residuum, containing at least 70 W% material boiling above 525{degrees}C. The combined coal and oil feedstocks are processed simultaneously with the dual objective of liquefying the coal and upgrading the petroleum-derived residuum to lower boiling (<525{degrees}C) premium products. HTI`s investigation of the Co-Processing technology has included work performed in laboratory, bench and PDU scale operations. The concept of co-processing technology is quite simple and a natural outgrowth of the work done with direct coal liquefaction. A 36 month program to evaluate new process concepts in coal-oil coprocessing at the bench-scale was begun in September 1994 and runs until September 1997. Included in this continuous bench-scale program are provisions to examine new improvements in areas such as: interstage product separation, feedstock concentrations (coal/oil), improved supported/dispersed catalysts, optimization of reactor temperature sequencing, and in-line hydrotreating. This does not preclude other ideas from DOE contracts and other sources that can lead to improved product quality and economics. This research work has led to important findings which significantly increased liquid yields, improved product quality, and improved process economics.

Leveraging information technology to drive improvement in patient satisfaction.

Science.gov (United States)

Nash, Mary; Pestrue, Justin; Geier, Peter; Sharp, Karen; Helder, Amy; McAlearney, Ann Scheck

2010-01-01

A healthcare organization's commitment to quality and the patient experience requires senior leader involvement in improvement strategies, and accountability for goals. Further, improvement strategies are most effective when driven by data, and in the world of patient satisfaction, evidence is growing that nurse leader rounding and discharge calls are strategic tactics that can improve patient satisfaction. This article describes how The Ohio State University Medical Center (OSUMC) leveraged health information technology (IT) to apply a data-driven strategy execution to improve the patient experience. Specifically, two IT-driven approaches were used: (1) business intelligence reporting tools were used to create a meaningful reporting system including dashboards, scorecards, and tracking reports and (2) an improvement plan was implemented that focused on two high-impact tactics and data to hardwire accountability. Targeted information from the IT systems enabled clinicians and administrators to execute these strategic tactics, and senior leaders to monitor achievement of strategic goals. As a result, OSUMC's inpatient satisfaction scores on the Hospital Consumer Assessment of Healthcare Providers and Systems survey improved from 56% nines and tens in 2006 to 71% in 2009. © 2010 National Association for Healthcare Quality.

Strategies for the Commercialization and Deployment of Greenhouse Gas Intensity-Reducing Technologies and Practices

Energy Technology Data Exchange (ETDEWEB)

Committee on Climate Change Science and Technology Integration (CCCSTI)

2009-01-01

New technologies will be a critical component--perhaps the critical component--of our efforts to tackle the related challenges of energy security, climate change, and air pollution, all the while maintaining a strong economy. But just developing new technologies is not enough. Our ability to accelerate the market penetration of clean energy, enabling, and other climate-related technologies will have a determining impact on our ability to slow, stop, and reverse the growth in greenhouse gas (GHG) emissions. Title XVI, Subtitle A, of the Energy Policy Act of 2005 (EPAct 2005) directs the Administration to report on its strategy to promote the commercialization and deployment (C&D) of GHG intensity-reducing technologies and practices. The Act also requests the Administration to prepare an inventory of climate-friendly technologies suitable for deployment and to identify the barriers and commercial risks facing advanced technologies. Because these issues are related, they are integrated here within a single report that we, representing the Committee on Climate Change Science and Technology Integration (CCCSTI), are pleased to provide the President, the Congress, and the public. Over the past eight years, the Administration of President George W. Bush has pursued a series of policies and measures aimed at encouraging the development and deployment of advanced technologies to reduce GHG emissions. This report highlights these policies and measures, discusses the barriers to each, and integrates them within a larger body of other extant policy. Taken together, more than 300 policies and measures described in this document may be viewed in conjunction with the U.S. Climate Change Technology Program's (CCTP's) Strategic Plan, published in September 2006, which focuses primarily on the role of advanced technology and associated research and development (R&D) for mitigating GHG emissions. The CCTP, a multi-agency technology planning and coordination program

Service Blueprint for Improving Clinical Guideline Adherence via Mobile Health Technology

OpenAIRE

Y. O'Connor; C. Heavin; S. O' Connor; J. Gallagher; J. Wu; J. O'Donoghue

2015-01-01

Background: To improve the delivery of paediatric healthcare in low resource settings, Community Health Workers (CHW) have been provided with a paper-based set of protocols known as Community Case Management (CCM). Yet research has shown that CHW adherence to CCM guidelines is poor, ultimately impacting health service delivery. Digitising the CCM guidelines via mobile technology is argued in extant literature to improve CHW adherence. However, little research exist which ...

Reducing Peripheral Inflammation with Infliximab Reduces Neuroinflammation and Improves Cognition in Rats with Hepatic Encephalopathy

Science.gov (United States)

Dadsetan, Sherry; Balzano, Tiziano; Forteza, Jerónimo; Cabrera-Pastor, Andrea; Taoro-Gonzalez, Lucas; Hernandez-Rabaza, Vicente; Gil-Perotín, Sara; Cubas-Núñez, Laura; García-Verdugo, José-Manuel; Agusti, Ana; Llansola, Marta; Felipo, Vicente

2016-01-01

Inflammation contributes to cognitive impairment in patients with hepatic encephalopathy (HE). However, the process by which peripheral inflammation results in cognitive impairment remains unclear. In animal models, neuroinflammation and altered neurotransmission mediate cognitive impairment. Taking into account these data, we hypothesized that in rats with HE: (1) peripheral inflammation is a main contributor to neuroinflammation; (2) neuroinflammation in hippocampus impairs spatial learning by altering AMPA and/or NMDA receptors membrane expression; (3) reducing peripheral inflammation with infliximab (anti-TNF-a) would improve spatial learning; (4) this would be associated with reduced neuroinflammation and normalization of the membrane expression of glutamate receptors. The aims of this work were to assess these hypotheses. We analyzed in rats with portacaval shunt (PCS) and control rats, treated or not with infliximab: (a) peripheral inflammation by measuring prostaglandin E2, IL10, IL-17, and IL-6; (b) neuroinflammation in hippocampus by analyzing microglial activation and the content of TNF-a and IL-1b; (c) AMPA and NMDA receptors membrane expression in hippocampus; and (d) spatial learning in the Radial and Morris water mazes. We assessed the effects of treatment with infliximab on peripheral inflammation, on neuroinflammation and AMPA and NMDA receptors membrane expression in hippocampus and on spatial learning and memory. PCS rats show increased serum prostaglandin E2, IL-17, and IL-6 and reduced IL-10 levels, indicating increased peripheral inflammation. PCS rats also show microglial activation and increased nuclear NF-kB and expression of TNF-a and IL-1b in hippocampus. This was associated with altered AMPA and NMDA receptors membrane expression in hippocampus and impaired spatial learning and memory in the radial and Morris water maze. Treatment with infliximab reduces peripheral inflammation in PCS rats, normalizing prostaglandin E2, IL-17, IL-6, and

Quality improvement in hospitals: how much does it reduce healthcare costs?

Science.gov (United States)

Jones, S B

1995-01-01

The philosophy of W.E. Deming suggests that continuous quality improvement efforts, when properly applied, ultimately will lead to financial dividends and will help ensure business longevity. Reducing hospital charges can be exciting for the participants and can provide an impetus for expanding quality improvement efforts. Americans, however, tend to demand almost instant gratification and have limited patience for longer-term results. This factor, coupled with minimal knowledge of actual operational costs and inaccurate charge accounting systems, may lead hospital managers to misinterpret the potential net long-term effects of their quality improvement efforts. In the approaching environment of capitated reimbursement, such mistakes may have serious consequences.

Proposal of Instruction Process for Improvement of Language Activities in Technology Education Course

OpenAIRE

山本, 智広; 山本, 利一

2012-01-01

This study is a proposal of instruction process for improvement of language activities in the technology education course in the junior high school in Japan. In this study, two efforts were carried out for the technology concerning material and processing. The first effort was the extraction of the learning situations that develop abilities of thinking, judgment and expression through language activities peculiar to the technology education course. The second effort was the verification o...

Advances in desalination technology

International Nuclear Information System (INIS)

Pankratz, T.M.

2005-01-01

Seawater desalination has been the cornerstone of the Middle East's water supply strategy since the mid-1950s, and most of the installed desalination capacity is still provided by multistage flash evaporators. But, desalination is changing. In fact, the term 'desalination' is no longer limited to seawater applications; desalination technologies are now routinely employed to desalinate brackish groundwater and repurify municipal effluents. Recent advances in desalination technology have simultaneously reduced costs while dramatically improving performance and reliability to the point where desalination technologies now compete with 'conventional' treatment processes in many applications. New commercial strategies and a realisation of the economies-of-scale have led to further improvements in plant economics, and an increase in the size of plants now being developed and constructed. This presentation reviews advances in membrane and membrane pretreatment systems, energy recovery devices, materials of construction, hybrid process configurations, increased unit capacities, and the use of public-private partnerships; all of which have led to reduced capital and operating costs, enabling desalination to be economically competitive with traditional treatment options. Advances in desalination technology have resulted in better performances, lower capital and operating costs, and increased application of desalination systems. In the face of increased water shortages and growing costs of 'conventional treatment', this trend will certainly continue. (author)

Technology-Based Rehabilitation to Improve Communication after Acquired Brain Injury

Directory of Open Access Journals (Sweden)

Carrie A. Des Roches

2017-07-01

Full Text Available The utilization of technology has allowed for several advances in aphasia rehabilitation for individuals with acquired brain injury. Thirty-one previous studies that provide technology-based language or language and cognitive rehabilitation are examined in terms of the domains addressed, the types of treatments that were provided, details about the methods and the results, including which types of outcomes are reported. From this, we address questions about how different aspects of the delivery of treatment can influence rehabilitation outcomes, such as whether the treatment was standardized or tailored, whether the participants were prescribed homework or not, and whether intensity was varied. Results differed by these aspects of treatment delivery but ultimately the studies demonstrated consistent improvement on various outcome measures. With these aspects of technology-based treatment in mind, the ultimate goal of personalized rehabilitation is discussed.

Technology-Based Rehabilitation to Improve Communication after Acquired Brain Injury.

Science.gov (United States)

Des Roches, Carrie A; Kiran, Swathi

2017-01-01

The utilization of technology has allowed for several advances in aphasia rehabilitation for individuals with acquired brain injury. Thirty-one previous studies that provide technology-based language or language and cognitive rehabilitation are examined in terms of the domains addressed, the types of treatments that were provided, details about the methods and the results, including which types of outcomes are reported. From this, we address questions about how different aspects of the delivery of treatment can influence rehabilitation outcomes, such as whether the treatment was standardized or tailored, whether the participants were prescribed homework or not, and whether intensity was varied. Results differed by these aspects of treatment delivery but ultimately the studies demonstrated consistent improvement on various outcome measures. With these aspects of technology-based treatment in mind, the ultimate goal of personalized rehabilitation is discussed.

How Advances in Technology Improve HIV/AIDS Care

Directory of Open Access Journals (Sweden)

Nik Tehrani

2016-12-01

Full Text Available In the U.S., the number of individuals aged 50 and older who are living with HIV has increased, leading to a phenomenon called the graying of the HIV/AIDS epidemic. Advances in treating HIV have brought about a large growing population of seniors with HIV who are simultaneously facing social, psychological, and physical challenges correlated with the aging process. The stigma against HIV/AIDS has been linked to poor health, depression, and loneliness. In a recent study, about 39.1% of HIV/AIDS patients showed symptoms of major depression (C. Grov et al, 2010. Consequently, to reduce lasting effects of major depressive symptoms, there is a vital need for service providers to employ innovative efforts to confront the stigma and psychosocial and physical health problems that are characteristic of an older HIV/AIDS population. The new technological approaches to healthcare delivery have resulted in faster, more accurate diagnosis and monitoring, in more sophisticated coordination across regions and agencies, and in sophisticated risk-checking procedures. New healthcare technology that can help the AIDS/HIV patient is called Health Information Technology, a basic element of Health Relationship Management Services (HRMS, which is a new approach to healthcare. HRMS can assist individuals with HIV/AIDS in managing not only their physical, but also their mental health.

Energy Saving Melting and Revert Reduction Technology: Improved Die Casting Process to Preserve the Life of the Inserts

Energy Technology Data Exchange (ETDEWEB)

David Schwam, PI; Xuejun Zhu, Sr. Research Associate

2012-09-30

lubricants and technical support. Experiments conducted with these lubricants demonstrated good protection of the substrate steel. Graphite and boron nitride used as benchmarks are capable of completely eliminating soldering and washout. However, because of cost and environmental considerations these materials are not widely used in industry. The best water-based die lubricants evaluated in this program were capable of providing similar protection from soldering and washout. In addition to improved part quality and higher production rates, improving die casting processes to preserve the life of the inserts will result in energy savings and a reduction in environmental wastes. Improving die life by means of optimized cooling line placement, baffles and bubblers in the die will allow for reduced die temperatures during processing, saving energy associated with production. The utilization of optimized die lubricants will also reduce heat requirements in addition to reducing waste associated with soldering and washout. This new technology was predicted to result in an average energy savings of 1.1 trillion BTU's/year over a 10 year period. Current (2012) annual energy saving estimates, based on commercial introduction in 2010, a market penetration of 70% by 2020 is 1.26 trillion BTU's/year. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2020 is 0.025 Million Metric Tons of Carbon Equivalent (MM TCE).

A review of activated carbon technologies for reducing MSW incinerator emissions

International Nuclear Information System (INIS)

Clarke, M.J.

1991-01-01

Though activated carbon is, by no means, a newcomer to the pollution control field, having been used as a water purifier and more recently demonstrated as a flue gas cleaner on power plants, it is now attracting considerable attention in Europe as a means to reduce further the quantity of toxic organic and metal emissions from new and existing municipal waste combustors. Since activated carbon is a potentially important future emissions control technology for MWCs in the US, particularly for removal of mercury and dioxin, this paper discusses the impetus which has motivated the experimentation with various activated carbon technologies which is now taking place, will describe how some of the activated carbon systems (e.g., post-emissions control fixed carbon bed and injection of carbon with scrubber reagent) being tested now function and where they fit in existing pollution control trains, and will present available performance data and emissions reductions actually achieved for each system

Development aid and the diffusion of technology: Improved cookstoves in Kenya and Rwanda

International Nuclear Information System (INIS)

Tigabu, Aschalew; Berkhout, Frans; Beukering, Pieter van

2017-01-01

This paper analyses the role of official development assistance (ODA) in the evolution of Technological Innovation Systems (TISs) of improved cookstoves in Kenya and Rwanda. Functionally balanced TISs are central to the diffusion of new technologies and practices. We find that ODA has significantly influenced major innovation activities related to improved cookstoves in both Kenya and Rwanda over the last 30 years. However, donors’ funding has been focused mainly on the development and diffusion of technical knowledge. We find that this pattern of ODA support has not fostered balanced and effective Technology Innovation Systems, and that this has contributed to the failure to achieve widespread diffusion of improved cookstoves. We develop a quasi-evolutionary model for the long-term and systematic ODA support of innovation systems to build sustainable renewable energy TISs in developing countries. - Highlights: • We report the role of aid in the evolution of cookstove innovation systems in Kenya and Rwanda. • We show that aid was mainly focused on two functions over time, overlooking other functions • Aid has failed to foster the development of balanced innovation systems in the studied cases. • This is associated with low level of diffusion of improved cookstoves in Kenya and Rwanda. • A conceptual proposal for effective aid interventions is provided.

The status of development of energy technologies to reduce greenhousegas emissions in Finland

International Nuclear Information System (INIS)

Salokoski, P.; Aeijaelae, M.

1997-01-01

In Finland there is a versatile energy production in which the combined heat and power production (CHP) plays a remarkable role. In the total power supply, the CHP production accounts for about 30 %. Biomass is also widely used. In all fuels, wood and peat accounts for 21 %, the largest share in Western Countries. The utilization of wood based fuels is also remarkable, about 16 %. The high rate of CHP production and the utilization of biomass have contributed to the lower CO 2 -emissions. In future, fossil fuels will probably be utilized in larger volumes because there are limits to the increasing of the capacity of the CHP production, biomass utilization, nuclear power and hydro power. Consequently added use of fossil fuels will increase the CO 2 -emissions. The methods with most potential in reducing CO 2 -emissions in Finland are an increased use of biomass, an expanding production of nuclear power, a larger number of CHP plants and an increase in the utilization of natural gas. Other important methods with a minor effect are technologies which increase the power/heat ratio or the efficiency. These technologies include the IGCC-technologies, the gasification-diesel or the diesel technology in general with small heat loads. These technologies will grow in importance if the substitutive fuel is biomass. Most of the technologies mentioned above are in use in Finland and, in our experience, can be recommended to other countries. Viable commercial technologies are, for example, the CHP techniques in both district heating and industrial processes, various small-scale power plants integrated to CHP or condensate power plants, the fluidized-bed technology in power production or heat production only the diesel technology; the cofiring of biomass and coal as well as the harvesting, handling, drying and utilization technologies of biomass. Technologies still in the developmental stage include the IGCC-technology for biomasses, the gasification-diesel, and the production

Improving CANDU plant operation and maintenance through retrofit information technology systems

International Nuclear Information System (INIS)

Lupton, L. R.; Judd, R. A.

1998-01-01

CANDU plant owners are facing an increasingly competitive environment for the generation of electricity. To meet this challenge, all owners have identified that information technology offers opportunities for significant improvements in CANDU operation, maintenance and administration (OM and A) costs. Targeted information technology application areas include instrumentation and control, engineering, construction, operations and plant information management. These opportunities also pose challenges and issues that must be addressed if the full benefits of the advances in information technology are to be achieved. Key among these are system hardware and software maintenance, and obsolescence protection. AECL has been supporting CANDU stations with the initial development and evaluation of systems to improve plant performance and cost. Five key initiatives that have been implemented or are in the process of being implemented in some CANDU plants to achieve cooperational benefits include: critical safety parameter monitor system; advanced computerized annunciation system; plant historical data system; plant display system; and digital protection system. Each system will be described in terms of its role in enhancing current CANDU plant performance and how they will contribute to future CANDU plant performance. (author). 8 refs., 3 figs

[Reducing inequality by improving preventing measures].

Science.gov (United States)

Valsecchi, M

2014-01-01

Terms of inequalities issue in health service are defined and the consolidated scientific acquisitions are recalled. Three prioritary areas of action are defined and described, that Prevention Departments are suggested to activate through focused programs in order to reduce specific inequalities. First area of action: includes three types of vital interventions: vaccinations, contrasting of tuberculosis infection and oncological screening that have to be granted to specific disadvantaged groups of population as Rom communities, immigrant women, prisoners e psychiatric patients. Second area of action: actions on focused urban planning aiming to improve conditions of social housing (with a special focus on thermal insulation, minimal distances to be kept towards streets of havy traffic), increase of increase of urban green spaces enjoyed by the population and contrasting degradation of housing (with particular attention to poisoning by carbon monoxide). Third area of action: actions contrasting cardiovascular diseases, that is the leading cause of death and inequalities in health for the working class population. A coordinated intervention directly in the workplace is proposed, where a particularly high percentage of individuals exposed to specific risk factors is present.

Reducing RN Vacancy Rate: A Nursing Recruitment Office Process Improvement Project.

Science.gov (United States)

Hisgen, Stephanie A; Page, Nancy E; Thornlow, Deirdre K; Merwin, Elizabeth I

2018-06-01

The aim of this study was to reduce the RN vacancy rate at an academic medical center by improving the hiring process in the Nursing Recruitment Office. Inability to fill RN positions can lead to higher vacancy rates and negatively impact staff and patient satisfaction, quality outcomes, and the organization's bottom line. The Model for Improvement was used to design and implement a process improvement project to improve the hiring process from time of interview through the position being filled. Number of days to interview and check references decreased significantly, but no change in overall time to hire and time to fill positions was noted. RN vacancy rate also decreased significantly. Nurse manager satisfaction with the hiring process increased significantly. Redesigning the recruitment process supported operational efficiencies of the organization related to RN recruitment.

Work management practices that reduce dose and improve efficiency

International Nuclear Information System (INIS)

Miller, D.W.; Hulin, M.

1998-01-01

Work management practices at nuclear power plants can dramatically affect the outcome of annual site dose goals and outage costs. This presentation discusses global work management practices that contribute to dose reduction including work philosophy, work selection, work planning, work scheduling, worker training, work implementation and worker feedback. The presentation is based on a two-year international effort (sponsored by NEA/IAEA ISOE) to study effective work practices that reduce dose. Experts in this area believe that effective work selection and planning practices can substantially reduce occupational dose during refueling outages. For example, some plants represented in the expert group complete refueling outages in 12-18 days (Finland) with doses below 0,90 person-Sv. Other plants typically have 50-75 day outages with substantially higher site doses. The fundamental reasons for longer outages and higher occupational doses are examined. Good work management principles that have a proven track record of reducing occupational dose are summarized. Practical methods to reduce work duration and dose are explained. For example, scheduling at nuclear power plants can be improved by not only sequencing jobs on a time line but also including zone and resource-based considerations to avoid zone congestion and manpower delays. An ongoing, global, benchmarking effort is described which provides current duration and dose information for repetitive jobs to participating utilities world-wide. (author)

Improvements in Care and Reduced Self-Management Barriers Among Rural Patients With Diabetes

Science.gov (United States)

Dettori, Nancy; Flook, Benjamin N.; Pessl, Erich; Quesenberry, Kim; Loh, Johnson; Harris, Colleen; McDowall, Janet M.; Butcher, Marcene K.; Helgerson, Steven D.; Gohdes, Dorothy; Harwell, Todd S.

2005-01-01

Improved preventive care and clinical outcomes among patients with diabetes can reduce complications and costs; however, diabetes care continues to be suboptimal. Few studies have described effective strategies for improving care among rural populations with diabetes. In 2000, the Park County Diabetes Project and the Montana Diabetes Control…

Canadian nuclear desalination/cogeneration technology development

International Nuclear Information System (INIS)

Humphries, J.R.

1996-01-01

The goal of the CANDESAL program has been to develop innovative applications of existing technologies that would offer an energy efficient, cost effective mechanism for the production of potable water and electricity. Large scale seawater desalination will be an important element in the solution of the global water shortage problem. For nuclear desalination to capture a significant share of this growing market, it must be economically competitive, as well as offer other advantages over more traditional fossil-fueled alternatives. The focus of activities in Canada has been on development of the technology in directions that would result in improved water production efficiency, reduced energy consumption, reduced environmental burden and reduced costs

Bringing Business Intelligence to Health Information Technology Curriculum

Science.gov (United States)

Zheng, Guangzhi; Zhang, Chi; Li, Lei

2015-01-01

Business intelligence (BI) and healthcare analytics are the emerging technologies that provide analytical capability to help healthcare industry improve service quality, reduce cost, and manage risks. However, such component on analytical healthcare data processing is largely missed from current healthcare information technology (HIT) or health…

The influence of bread improvers and different technological parameters on bread quality

OpenAIRE

Duobienė, Lina

2015-01-01

Goal of the research: to analyse quality parameters of different types of bread, produced with or without improvers, also to evaluate intensity of microbiological spoilage of bread during storage. Results and findings: Different bread technologies have influence on bread quality parameters and in all cases bread improvers have positive influence on bread quality: „Lietuviškas ragaišis“ (Lithuanian whole wheat bread) using improvers the higher specific volume (21.27%) and porosity (9.02%...

Improving the Engine room of a Yacht

OpenAIRE

Castells, Josep

2016-01-01

The aim of this project is to improve the energy efficiency of a sailing yacht engine room by reducing the inputs and maximizing the outputs and simultaneously striving to reduce the weight. The document is structured in three sections; an introduction about the important concepts and the case, a theoretical part with the technologies that are applicable in the project and that could improve it and finally, an analysis and suggested improvements of the system. This project strives to exp...

Using the ICOT Instrument to Improve Instructional Technology Usage in the ABE Classroom

Science.gov (United States)

Lentz, Brannon W.

2011-01-01

The International Society for Technology (ISTE) in Education promotes the use of a specific tool--the ISTE Classroom Observation Tool (ICOT)--to measure and improve the use of instructional technologies in Adult Basic Education (ABE) classrooms. The purpose of this article is to describe an application process for the use of the ICOT instrument…

Improving farming practices reduces the carbon footprint of spring wheat production.

Science.gov (United States)

Gan, Yantai; Liang, Chang; Chai, Qiang; Lemke, Reynald L; Campbell, Con A; Zentner, Robert P

2014-11-18

Wheat is one of the world's most favoured food sources, reaching millions of people on a daily basis. However, its production has climatic consequences. Fuel, inorganic fertilizers and pesticides used in wheat production emit greenhouse gases that can contribute negatively to climate change. It is unknown whether adopting alternative farming practices will increase crop yield while reducing carbon emissions. Here we quantify the carbon footprint of alternative wheat production systems suited to semiarid environments. We find that integrating improved farming practices (that is, fertilizing crops based on soil tests, reducing summerfallow frequencies and rotating cereals with grain legumes) lowers wheat carbon footprint effectively, averaging -256 kg CO2 eq ha(-1) per year. For each kg of wheat grain produced, a net 0.027-0.377 kg CO2 eq is sequestered into the soil. With the suite of improved farming practices, wheat takes up more CO2 from the atmosphere than is actually emitted during its production.

Improved HEPA Filter Technology for Flexible and Rigid Containment Barriers

International Nuclear Information System (INIS)

Pinson, Paul Arthur

1998-01-01

Safety and reliability in glovebox operations can be significantly improved and waste packaging efficiencies can be increased by inserting flexible, lightweight, high capacity HEPA filters into the walls of plastic sheet barriers. This HEPA filter/barrier technology can be adapted to a wide variety of applications: disposable waste bags, protective environmental barriers for electronic equipment, single or multiple use glovebag assemblies, flexible glovebox wall elements, and room partitions. These reliable and inexpensive filtered barriers have many uses in fields such as radioactive waste processing, HVAC filter changeout, vapor or grit blasting, asbestos cleanup, pharmaceutical, medical, biological, and electronic equipment containment. The applications can result in significant cost savings, improved operational reliability and safety, and total waste volume reduction. This technology was developed at the Argonne National Laboratory-West (ANL-W) in 1993 and has been used at ANL-W since then at the TRU Waste Characterization Chamber Gloveboxes. Another 1998 AGS Conference paper titled ''TRU Waste Characterization Gloveboxes'', presented by Mr. David Duncan of ANL-W, describes these boxes

The Promise of Education Information Systems: How Technology Can Improve School Management and Success

Science.gov (United States)

Levenson, Nathan; Boser, Ulrich

2014-01-01

Many school district strategic plans and education conferences are aggressively embracing technology to improve teaching and learning. Classroom technology typically includes blended learning, personalized learning, online courses for students, and professional development for teachers, among many other things. As districts wrestle with tighter…

Engineered Nanostructured MEA Technology for Low Temperature Fuel Cells

Energy Technology Data Exchange (ETDEWEB)

Zhu, Yimin

2009-07-16

The objective of this project is to develop a novel catalyst support technology based on unique engineered nanostructures for low temperature fuel cells which: (1) Achieves high catalyst activity and performance; (2) Improves catalyst durability over current technologies; and (3) Reduces catalyst cost. This project is directed at the development of durable catalysts supported by novel support that improves the catalyst utilization and hence reduce the catalyst loading. This project will develop a solid fundamental knowledge base necessary for the synthetic effort while at the same time demonstrating the catalyst advantages in Direct Methanol Fuel Cells (DMFCs).

Integrated construction management technology for power plants

International Nuclear Information System (INIS)

Okada, Hisako; Miura, Jun; Nishitani, Yasuhiko

2003-01-01

The improvement and rationalization of the plant construction technology has been promoted in order to shorten the construction period, to improve the quality and reliability, and especially to reduce construction costs. With the recent remarkable advances of computer technology, it is necessary to introduce an electronic information technology (IT) into the construction field, and to develop a business process. In such a situation, Hitachi has developed and applied integrated construction support system, which is consistent among design, production and construction. This system has design information and schedule information made electronically as a basic database, and characterizes with project management function based on that information. By introduction of this system, electronic processing of information and reduction of paperwork has enabled high efficiency and standardization of on-site indirect work. Furthermore, by collaboration with the civil company, electrical data exchange has been carried out and developed techniques to improve the interface between mechanical and civil work. High accuracy of construction planning and unification of schedule data have been achieved, and consequently, rework and adjustment at the job site have been greatly reduced. (author)

Effects of long-term coal supply contracts on technology adoption and improvements in the mining of coal. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Walton, D.R.; Hawkins, S.A.; Webb, P.F.; Kauffman, P.W.

1979-08-01

The relationship between long-term coal supply contracts and the adoption of new technology in the coal mining industry is a complex one. From this study certain conclusions can be drawn. New technologies and improvements in the mining of coal can be logically categorized into three areas: evolutionary technology, transitional technology, or innovative technology. Evolutionary improvements in technology can be categorized as improvements, or increased production capacities, in existing equipment. Transitional technology involves the adoption of existing or proven technologies into new conditions, or, proceeding from one technology type to a newer type for the same function. Innovative technology includes equipment, concepts, and systems not readily available, or untried, in the existing mining environment (seam conditions, etc.). Technology adoption is an economic decision. This point was repeatedly emphasized by industry representatives contacted during the study. The long-term coal supply contract influences the decision to adopt new technology and mining improvements in several ways depending on the technology type (i.e., evolutionary, transitional, or innovative), and also the coal supplier type (i.e., captive or independent producer). Several examples of the adoption of new technologies in mines under long-term coal supply contracts are discussed. (LTN)

Improving Energy Efficiency Through Technology. Trends, Investment Behaviour and Policy Design

Energy Technology Data Exchange (ETDEWEB)

Florax, R.J.G.M. [Purdue University, West Lafayette, IN (United States); De Groot, H.L.F. [VU University, Amsterdam (Netherlands); Mulder, P. [Tinbergen Institute, Amsterdam (Netherlands)] (eds.)

2011-10-15

This innovative book explores the adoption of energy-saving technologies and their impact on energy efficiency improvements. It contains a mix of theoretical and empirical contributions, and combines and compares economic and physical indicators to monitor and analyse trends in energy efficiency. The authors pay considerable attention to empirical research on the determinants of energy-saving investment including uncertainty, energy-price volatility and subsidies. They also discuss the role of energy modelling in policy design and the potential effect of energy policies on technology diffusion in energy-extensive sectors. Written from a multi-disciplinary perspective, this book will appeal to academics and graduates in the areas of energy-saving technologies, energy economics and natural resource economics, as well as policy makers - particularly those in energy policy.

Improving extraction technology of level seams. Sovershenstvovanie tekhnologii razrabotki pologikh plastov

Energy Technology Data Exchange (ETDEWEB)

Shetser, M G; Spitsyn, Yu G

1985-01-01

This report deals with conditions and prospects for intensifying extraction of level and inclined seams and improving extraction technology. Reviews mechanization of excavation of stables with automatic cutter-loaders (KA80 in conjunction with KD80); coal extraction using two cutter-loaders in seams 0.9 - 1.9 m thick and up to 20 degrees inclination (pillar mining); reciprocating method of coal cutting; one-sided method of coal extraction (KMK97 cutter loaders). Discusses strengthening of junctions of faces with gate roads (KSU and KSU3M props); improved types of props (hydraulic props SUG-30, SUG-V and GVD); roof control methods (induced caving, advance torpedoing or using KM87UMP and KMT power supports). Deals in detail with introduction of new extraction technology and strengthening of unstable rock by injecting polyurethene compounds, extraction of seams with wide-web cutter-loaders (Kirovets, IK101) and plowing. (3 refs.)

The connecting health and technology study: a 6-month randomized controlled trial to improve nutrition behaviours using a mobile food record and text messaging support in young adults

OpenAIRE

Kerr, Deborah A.; Harray, Amelia J.; Pollard, Christina M.; Dhaliwal, Satvinder S.; Delp, Edward J.; Howat, Peter A.; Pickering, Mark R.; Ahmad, Ziad; Meng, Xingqiong; Pratt, Iain S.; Wright, Janine L.; Kerr, Katherine R.; Boushey, Carol J.

2016-01-01

Background Early adulthood represents the transition to independent living which is a period when changes in diet and body weight are likely to occur. This presents an ideal time for health interventions to reduce the effect of health problems and risk factors for chronic disease in later life. As young adults are high users of mobile devices, interventions that use this technology may improve engagement. The Connecting Health and Technology study aimed to evaluate the effectiveness of tailor...

Increasing productivity by improved arc and beam welding technologies

International Nuclear Information System (INIS)

Dilthey, Ulrich; Stein, Lars

2005-01-01

In the early sixties, GMA welding methods were introduced into industrial manufacturing and they have been consequently developed further ever since. Recent advances do not only refer to power-source technology but also improved wire feed systems and new consumables such as filler materials and shielding gases. Great efforts have been made to increase deposition rates, and with this efficiency and welding speeds, by extending the frontiers of known processes and by developing new ones

Integrating Cognitive Science and Technology Improves Learning in a STEM Classroom

Science.gov (United States)

Butler, Andrew C.; Marsh, Elizabeth J.; Slavinsky, J. P.; Baraniuk, Richard G.

2014-01-01

The most effective educational interventions often face significant barriers to widespread implementation because they are highly specific, resource intense, and/or comprehensive. We argue for an alternative approach to improving education: leveraging technology and cognitive science to develop interventions that generalize, scale, and can be…

Flaring fix: better technologies green flaring

International Nuclear Information System (INIS)

Stastny, P.

2004-01-01

Recent advances in reducing solution gas flaring and venting are discussed, highlighting the 2002 report of the Clean Air Strategic Alliance (CASA) and its 39 recommendations targeting a 50 per cent reduction in flaring from a 1996 baseline. Much of the improvement to date (62 per cent at the end of 2002 on an annual basis) has come from collecting and sending gas down pipelines for processing, but improvements in technologies such as incineration, in combustion efficiency, and the use of micro-turbines, also helped to make a difference. Improvements in smokeless flares, through the addition of a special flare tip to flare stacks, has similarly contributed to higher combustion efficiency, and further improvements are expected from sonic flare technology currently under development. Expectations are also high for advances in incinerator technology, particularly enclosed burner systems, which almost completely burn flare gas while having no visible flame, smoke or odor

Emerging energy-efficient technologies for industry

International Nuclear Information System (INIS)

Worrell, Ernst; Martin, Nathan; Price, Lynn; Ruth, Michael; Elliott, Neal; Shipley, Anna; Thorn, Jennifer

2001-01-01

For this study, we identified about 175 emerging energy-efficient technologies in industry, of which we characterized 54 in detail. While many profiles of individual emerging technologies are available, few reports have attempted to impose a standardized approach to the evaluation of the technologies. This study provides a way to review technologies in an independent manner, based on information on energy savings, economic, non-energy benefits, major market barriers, likelihood of success, and suggested next steps to accelerate deployment of each of the analyzed technologies. There are many interesting lessons to be learned from further investigation of technologies identified in our preliminary screening analysis. The detailed assessments of the 54 technologies are useful to evaluate claims made by developers, as well as to evaluate market potentials for the United States or specific regions. In this report we show that many new technologies are ready to enter the market place, or are currently under development, demonstrating that the United States is not running out of technologies to improve energy efficiency and economic and environmental performance, and will not run out in the future. The study shows that many of the technologies have important non-energy benefits, ranging from reduced environmental impact to improved productivity. Several technologies have reduced capital costs compared to the current technology used by those industries. Non-energy benefits such as these are frequently a motivating factor in bringing technologies such as these to market. Further evaluation of the profiled technologies is still needed. In particular, further quantifying the non-energy benefits based on the experience from technology users in the field is important. Interactive effects and inter-technology competition have not been accounted for and ideally should be included in any type of integrated technology scenario, for it may help to better evaluate market

Anti-Mullerian hormone-tailored stimulation protocols improve outcomes whilst reducing adverse effects and costs of IVF.

Science.gov (United States)

Yates, A P; Rustamov, O; Roberts, S A; Lim, H Y N; Pemberton, P W; Smith, A; Nardo, L G

2011-09-01

Anti-Müllerian hormone (AMH) is increasingly used to quantify ovarian reserve, but it has not yet realized its full clinical potential in assisted reproduction technology. We investigated the possible benefits of using novel, stratified ovarian hyperstimulation protocols, tailored to individual AMH levels, compared with conventional stimulation. Retrospective data were collected from 769 women (first cycle of IVF, using fresh embryos), in a UK tertiary care unit: 346 women using conventional stimulation protocols; 423 women treated under new AMH-tailored protocols. Embryo transfer rates increased significantly (79-87%: P= 0.002) after the introduction of AMH-tailored stimulation protocols. Pregnancy rate per cycle started and live birth rate also increased significantly compared with conventionally treated women (17.9-27.7%, P= 0.002 and 15.9-23.9%, P = 0.007, respectively). Moreover, in the AMH group, the incidence of the ovarian hyperstimulation syndrome (OHSS) fell significantly (6.9-2.3%, P = 0.002) and failed fertilization fell from 7.8 to 4.5%. The cost of fertility drug treatment fell by 29% per patient and the overall cost of clinical management of OHSS fell by 43% in the AMH group. GnRH antagonist protocols, introduced as part of AMH-tailored treatment, may have contributed to the observed improvements: however, within the AMH-tailored group, the live birth rate was not significantly different between agonist and antagonist-treated groups. Although large, prospective, multicentre studies are indicated, we have clearly demonstrated that individualized, AMH-guided, controlled ovarian hyperstimulation protocols significantly improved positive clinical outcomes, reduced the incidence of complications and reduced the financial burden associated with assisted reproduction.

Impact of improved technologies on small-scale soybean production: empirical evidence from benue state, nigeria

International Nuclear Information System (INIS)

Adisa, R.S.; Balogun, K.S.

2013-01-01

The study examined the impact of improved technologies on the lives of small-scale soybean farmers in Benue State, Nigeria. A total of 160 respondents were selected using simple random sampling technique. Data were analyzed using descriptive statistics, Tobit model and the Kruskal-Wallis test. Findings revealed that 35.6% of the respondents were between 31 and 40 years old, 40.6% had household size of between 6 and 10 members. Majority of the respondents were male, married, and had secondary school education. Tobit analysis revealed that farmers socioeconomic characteristics which include gender, educational status and farming experience; and farmers knowledge on soybean innovations were significant factors determining the adoption of improved soybean production technologies. These factors were statistically significant at p=0.05. The adoption of improved soybean technologies has had a clear positive impact on farmers belief on soybean innovations. The major problems facing farmers in the adoption of improved soybean production technologies according to Kruskal-Wallis ranking were high cost of inputs, problem of labour availability and lack of credit/loan. The results of this study provide a strong case for the promotion of soybean as a solution for malnutrition and a means of poverty alleviation for poor people. (author)

A review of digital radiography technology for valve inspection

International Nuclear Information System (INIS)

Stoev, K.; Guerout, F.M.; Horn, D.

2008-01-01

There are thousands of valves in a nuclear power plant (NPP) used for control, safety and checks in various plant systems, so there is a well-identified need for fast and reliable inspection and diagnostics of valves. Digital radiography can provide considerable improvements to the inspection and testing procedures for valves in comparison to classical film radiography. These improvements can lead to significant financial advantages by providing real-time inspection results, significantly reduced inspection and decision-making time, and reduced operational cost. Digital image processing, including digital image enhancement, digital archiving, and digital communication of the images and the results, is also a considerable advantage over classical film radiography technology. Another advantage of digital radiography technology is the improved safety and the reduced environmental impact due to reduced exposure/test times, use of smaller exclusion zones, elimination of chemical processing, and absence of disposable materials. This paper reviews the existing technology and evaluates the potential of digital radiography for inspection and diagnostics of valves. Station needs and requirements are assessed, and the safety, environmental and economical constraints of digital radiography techniques estimated. The advantages and disadvantages of different digital radiography equipment are compared, and their limitations and characteristics studied. (author)

Ultra-supercritical (USC) technology. The best practical and economic way to reduce CO{sub 2} emissions from coal fired power plants

Energy Technology Data Exchange (ETDEWEB)

Mao, Jianxiong [Tsinghua Univ., Beijing (China). Dept. of Thermal Engineering

2013-07-01

China is the largest coal producer and consumer with largest coal power capacity in the world. By the end of 2010, the total installed power capacity in China was 962,190 MWe, in which coal fired power capacity was 706,630 MWe, accounting for over 73.4%. China has been the largest CO{sub 2} emission country as well and its huge coal power capacity is the largest CO{sub 2} emission source. How does China reduce its CO{sub 2} emissions from coal fired power plants is an austere challenge now we are facing. How does China reduce its CO{sub 2} emissions from coal fired power plants? There are three ways to reduce CO{sub 2} emissions from coal fired power plants: (1) carbon capture and storage (CCS); (2) co-firing biomass with coal; (3) much improvement of efficiency. For the first option of CCS, the technology is still under development and there are still several uncertainties today to be widely used for coal fired power plants in the short term. For the second option of biomass co-firing, it can reduce CO{sub 2} emissions in a way, but it is difficult to implement it in China without strong support of incentive policy. Therefore, the third option of improvement of efficiency is the only but also the best and feasible economic option for China to much reduce CO{sub 2} emissions from coal fired power plants. This paper will discuss how China to take a active policy to strongly promote the application of supercritical (SC)/Ultra supercritical (USC) technology. Only in 4 years from 2007 to 2010, ordered capacity of coal fired SC/USC units was 482 units with installed capacity of 230,060 MWe, in which, 1,000 MWe USC with 600 C steam parameters was almost 100 units with 100,000 MWe in which 33 units have been in operation. Today, China has been a country with the largest SC/USC units and capacity. The fast application of SC/USC units for coal fired power plants has resulted in energy saving and reduction of emissions. The average coal consumption in China reduced from 366

Beyond usability: designing effective technology implementation systems to promote patient safety.

Science.gov (United States)

Karsh, B-T

2004-10-01

Evidence is emerging that certain technologies such as computerized provider order entry may reduce the likelihood of patient harm. However, many technologies that should reduce medical errors have been abandoned because of problems with their design, their impact on workflow, and general dissatisfaction with them by end users. Patient safety researchers have therefore looked to human factors engineering for guidance on how to design technologies to be usable (easy to use) and useful (improving job performance, efficiency, and/or quality). While this is a necessary step towards improving the likelihood of end user satisfaction, it is still not sufficient. Human factors engineering research has shown that the manner in which technologies are implemented also needs to be designed carefully if benefits are to be realized. This paper reviews the theoretical knowledge on what leads to successful technology implementation and how this can be translated into specifically designed processes for successful technology change. The literature on diffusion of innovations, technology acceptance, organisational justice, participative decision making, and organisational change is reviewed and strategies for promoting successful implementation are provided. Given the rapid and ever increasing pace of technology implementation in health care, it is critical for the science of technology implementation to be understood and incorporated into efforts to improve patient safety.

Water quality audits can improve availability and reduce costs

International Nuclear Information System (INIS)

Dvorin, R.S.; Schlesinger, H.A.

1984-01-01

The Water Quality Audit (WQA) is an independent, detailed review and thorough analysis of an operating plant's water technology control systems and operator education (as distinguished from operator training). The need for such an audit and its role in improving the reliability and availability of both nuclear and fossil-fueled power plants is discussed. Instances of how the failure of either system hardware or operational control has caused injection of seawater, acid, caustic, or ion exchange resin into the condensate-feedwater system and steam generator are revealed. The systems to be audited are described, and the stage-wise nature of the audit explained. The potential savings of an audit are outlined and the timing and range of costs of a WQA are given

Thermal-hydraulics technological strategy roadmap for LWR safety improvement and development

International Nuclear Information System (INIS)

Nakamura, Hideo; Arai, Kenji; Oikawa, Hirohide

2015-01-01

New version of the Thermal-Hydraulics Safety Evaluation Fundamental Technology Enhancement Strategy Roadmap (TH-RM) was developed by the Atomic Energy Society of Japan (AESJ) for LWR safety improvement and development. The 1st version of TH-RM was prepared in 2009 under collaboration of utilities, vendors, universities, research institutes and technical support organizations (TSO) for regulatory body. The revision was made by three sub-working groups (SWGs) by considering the lessons learned from the Fukushima Daiichi Accident. The 'safety assessment' SWG pursued development of computer codes for safety assessment. The 'fundamental technology' SWG pursued safety improvement and risk reduction via accident management (AM) measures by referring the technical map for severe accident (SA) established by the 'severe accident' SWG. Phenomena and components for counter-measures and/or proper prediction are identified by going through SA progression in both reactor and spent-fuel pool of PWR and BWR. Twelve important technology development subjects were identified, which include melt coolability enhancement to maintain integrity of containment vessel. Fact Sheet was developed to describe each of identified and selected R and D subjects. External hazards are also considered how to cope with from thermal-hydraulic safety point of view. This paper summarizes the revised TH-RM with several examples and future perspectives. (author)

Reducing Variability of Workforce as a Tool to Improve Plan Reliability

DEFF Research Database (Denmark)

Shen, Yicheng; Zygmunt, Katarzyna Julia; Wandahl, Søren

2017-01-01

Variability of flow is recognized as one of the greatest obstacles to production management. Since the work flow and labour flow are two dominators of work performance, it is important to manage them simultaneously. The objective of this paper is to examine if an increased plan reliability could...... of the workforce flow does not necessarily shorten the project length, nevertheless it increases probability to finish the tasks within a critical path duration. Additionally, it was concluded, that reducing the variance of crew allocation can improve the productivity....... be reached by reducing the variance of a labour flow. Therefore, three different construction labour data sets have been examined by utilizing Monte Carlo Simulation, to analyze the probability to finish simulated projects within a certain time. The research findings revealed that reducing variance...

Introduction to Pinch Technology

DEFF Research Database (Denmark)

Rokni, Masoud

? How to put energy efficiency and other targets like reducing emissions, increasing plant capacities, improve product qualities etc, into a one coherent strategic plan for the overall site? All these questions and more can be answered with a full understanding of Pinch Technology and an awareness...... of the available tools for applying it in a practical way. The aim here is to provide the basic knowledge of pinch technology concept and how it can be applied across a wide range of process industries. The pinch technology was proposed firstly for optimization of heat exchangers and therefore it is introduced...

How can Human Intelligence Enhance Collection in an Era of Un-manned Technology and Reduced Personnel?

Science.gov (United States)

2014-12-12

nexus of intelligence and technology is like a new toy for a small child . The President, the CIA, and the entire intelligence community have become...that could. The espionage trade was developed by using the technology available at the time, and incorporating any means available to collect relevant...reduced immediate need, such as an ongoing or developing conflict or war, is it responsible to maintain a capability just in case, where there may be an

Efficacy of application technology of managing physical exercise by the musical accompaniment to reduce school anxiety first form pupils

Directory of Open Access Journals (Sweden)

Y.V. Smirnova

2014-01-01

Full Text Available Purpose : to study the need to improve the mental state of first-graders and the possibility of achieving this goal, the lesson of physical culture at the expense of proper use of musical accompaniment exercise. Material : participated in the experiment experimental, control and background group (only 55 students of first class. Results : argues that music has a regulating effect on mental and physiological state of a person. It is noted that the combined effects of exercise and music on the body and psyche of a child reduces total anxiety in school. Also reduces the fear in a meaningful situation knowledge test. Found that the effect of exercise without music and with various embodiments use musical accompaniment in the lesson to address interpersonal relations student and the teacher has no significant difference. Conclusions : as a result of the pedagogical experiment to identify significantly positive, confirming the effectiveness of the technology of managing physical exercise by the musical accompaniment for the performance of most indicators of school anxiety.

Implementation of Emerging Technologies

DEFF Research Database (Denmark)

Barba, F. J.; Orlien, Vibeke; Mota, Maria J.

2016-01-01

safety are presented and discussed with an ultimate goal to explore strategies for their implementation in the food industry. Novel thermal and nonthermal technologies have shown clear environmental benefits by improving the overall energy efficiency of the process and reducing the use of nonrenewable......Novel processing technologies have been gaining interest among food researchers due to their lower impact on nutritional and sensory properties of the products compared to the conventional thermal techniques. In this chapter some of the most well-studied (eg, high-pressure processing, pulsed...... electric fields, ohmic heating, microwave, and ultrasound) emerging technologies are briefly reviewed. Most of these technologies have found niche applications in the food industry, replacing or complementing conventional preservation technologies. Thereby, data on commercialization, energy, and microbial...

The impact of technological improvements on developing financial markets: The case of the Johannesburg Stock Exchange

Directory of Open Access Journals (Sweden)

Mehmet F. Dicle

2013-07-01

Full Text Available Can a significant technological improvement make an economically justifiable contribution to a financial market's development? The Johannesburg Stock Exchange (JSE incorporated the SETS system from the London Stock Exchange in 2002. It is certain that SETS is a technologically efficient trading system, and it would undoubtedly improve trading in the JSE. We test whether SETS represents a structural break by examining whether there was an increase in the JSE's liquidity, market efficiency and international integration after the introduction of SETS. While SETS is certainly a technological improvement with increased liquidity, it is not a sufficient factor to render it efficient. After the incorporation of SETS, the JSE has become more independent and it now offers better diversification opportunities for international investors.

Strategic materials: Technologies to reduce US import vulnerability

Science.gov (United States)

1985-05-01

Three nations, South Africa, Zaire, and the U.S.S.R., account for over half of the world's production of chromium, cobalt, manganese, and platinum group metals. These metals are essential in the production of high-temperature alloys, steel and stainless steel, industrial and automotive catalysts, electronics, and other applications that are critical to the U.S. economy and the national defense. With minor exceptions, there is no domestic mine production of any of the four metals. Government actions to assure secure supplies of metals critical to the United States have been limited largely to reliance on the national defense stockpile to ensure the availability of materials required for national defense in time of war, leaving it to the free market to provide a diversity of suppliers for the industrial economy. An overall strategy to reduce U.S. reliance on uncertain sources of supply of strategic materials should be based on a combination of three technical approaches: increase the diversity of the world supply of strategic metals through the development of promising deposits; decrease demand for strategic metals through the implementation of improved manufacturing processes and recycling of strategic materials from scrap and waste; and identify and test substitute materials for current applications and develop new materials with reduced strategic material content for future applications.

Mine Waste Technology Program. In Situ Source Control Of Acid Generation Using Sulfate-Reducing Bacteria

Science.gov (United States)

This report summarizes the results of the Mine Waste Technology Program (MWTP) Activity III, Project 3, In Situ Source Control of Acid Generation Using Sulfate-Reducing Bacteria, funded by the U.S. Environmental Protection Agency (EPA) and jointly administered by EPA and the U.S....

Improving the efficiency of R&D and the market diffusion of energy technologies

CERN Document Server

Bradke, Harald; Som, Oliver; Mannsbar, Wilhelm; Cremer, Clemens; Dreher, Carsten; Edler, Jakob; Ebersberger, Bernd; Radgen, Peter; Ruhland, Sascha; Krebs, Alexandra

2009-01-01

Is there a chance that public or private research and development institutions can improve the efficiency of the R&D process? This book gives a positive answer by designing an integrated concept of the science technology cycle and the innovation system of each technology. The position of a new technology in the sciencetechnology cycle is identified by several indicators from patent analysis, citations and market information data. The innovation system supports the search for a comprehensive understanding of all important stakeholders of an innovation, possible obstacles and related policies. T

MEMS-LSI Integrated Microchip using Pseudo-SoC Technology

Science.gov (United States)

Funaki, Hideyuki; Itaya, Kazuhiko; Yamada, Hiroshi; Onozuka, Yutaka; Iida, Atsuko

The authors have developed pseudo-SoC technology to realize MEMS-LSI integrated micro-chip. The pseudo-SoC technology consists of three technologies which are wafer reconfiguration technology, inter-chip redistribution layer technology, and pseudo-SoC thinning technology. In the wafer reconfiguration technology, the filling of resin and surface step between heterogeneous chips were improved through the optimization of vacuum printing process and resin material. These improvements reduced the warpage of reconfiguration wafer, leading to achievement of the reconfiguration wafer with 5 inch in diameter. In the inter-chip redistribution layer technology, the interface adherence between planar layer and inter-chip redistribution layer was improved, leading to the inter-chip redistribution layer with 1μm/1μm in line/space on reconfiguration wafer. In the pseudo-SoC thinning technology, thin pseudo-SoC device with 100μm in thickness was achieved through developing mechanical backside grinding process technology. Furthermore, ultra-thin pseudo-SoC which integrated electrostatic MEMS light valve and PWM driver IC was prototyped through developing the ultra-thin MEMS encapsulation technology.

Steam vacuum cleaning. Innovative technology summary report

International Nuclear Information System (INIS)

1999-05-01

The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. The baseline technology currently used for washing debris is a high-pressure water cleaning (HPWC) system. The system used at the FEMP is the Hotsy reg-sign Model 550B HPWC. Although the HPWC technology has functioned satisfactorily, improvements are being sought in areas related to reduced liquid waste volume, increased productivity, increased washing effectiveness, and decreased airborne contamination. An innovative technology that offers potential improvements in these areas is a steam vacuum cleaning (SVC) system that integrates high-pressure steam cleaning with a vacuum recovery sub-system that simultaneously collects dislodged contaminants thereby reducing airborne contamination. The SVC system selected for demonstration at the FEMP was the Kelly trademark Decontamination System shown. This report provides comparative performance and cost analyses between the Hotsy HPWC system and the Kelly Decontamination System. Both technologies were demonstrated at the FEMP site located at Fernald, Ohio from July 29, 1996 through August 15, 1996. The demonstrations were conducted at the FEMP Plant 1 as part of the LSTD project sponsored by the Deactivation and Decommissioning Focus Area (DDFA) of the US DOE's Office of Science and Technology

Technology Improvement for the High Reliability LM-2F Launch Vehicle

Institute of Scientific and Technical Information of China (English)

QIN Tong; RONG Yi; ZHENG Liwei; ZHANG Zhi

2017-01-01

The Long March 2F (LM-2F) launch vehicle,the only launch vehicle designed for manned space flight in China,successfully launched the Tiangong 2 space laboratory and the Shenzhou ll manned spaceship into orbits in 2016 respectively.In this study,it introduces the technological improvements for enhancing the reliability of the LM-2F launch vehicle in the aspects of general technology,control system,manufacture and ground support system.The LM2F launch vehicle will continue to provide more contributions to the Chinese Space Station Project with its high reliability and 100％ success rate.

A Survey of Hadron Therapy Accelerator Technologies.

Energy Technology Data Exchange (ETDEWEB)

PEGGS,S.; SATOGATA, T.; FLANZ, J.

2007-06-25

Hadron therapy has entered a new age [1]. The number of facilities grows steadily, and 'consumer' interest is high. Some groups are working on new accelerator technology, while others optimize existing designs by reducing capital and operating costs, and improving performance. This paper surveys the current requirements and directions in accelerator technology for hadron therapy.

Contemporary Technologies to Improve the Quality of Education When Training Teachers

Science.gov (United States)

Sibgatullina, Alfiya

2015-01-01

The article considers contemporary technologies to improve the quality of teachers' education (as exemplified by the training of foreign language teachers). The author presents analysis of the "quality of education" concept, proposes and analyzes the criteria for assessing the quality of education of future foreign language teachers.…

Evaluation of an mHealth intervention aiming to improve health-related behavior and sleep and reduce fatigue among airline pilots.

Science.gov (United States)

van Drongelen, Alwin; Boot, Cécile Rl; Hlobil, Hynek; Twisk, Jos Wr; Smid, Tjabe; van der Beek, Allard J

2014-11-01

The aim of this study was to evaluate the effects of an mHealth intervention (intervention using mobile technology) consisting of tailored advice regarding exposure to daylight, sleep, physical activity, and nutrition, and aiming to improve health-related behavior, thereby reducing sleep problems and fatigue and improving health perception of airline pilots. A randomized controlled trial was conducted among 502 airline pilots. The intervention group was given access to both the MORE Energy mobile application (app) with tailored advice and a website with background information. The control group was directed to a website with standard information about fatigue. Health-related behavior, fatigue, sleep, and health perception outcomes were measured through online questionnaires at baseline and at three and six months after baseline. The effectiveness of the intervention was determined using linear and Poisson mixed model analyses. After six months, compared to the control group, the intervention group showed a significant improvement on fatigue (β= -3.76, P<0.001), sleep quality (β= -0.59, P=0.007), strenuous physical activity (β=0.17, P=0.028), and snacking behavior (β= -0.81, P<0.001). No significant effects were found for other outcome measures. The MORE Energy mHealth intervention reduced self-reported fatigue compared to a minimal intervention. Some aspects of health-related behavior (physical activity and snacking behavior) and sleep (sleep quality) improved as well, but most did not. The results show offering tailored advice through an mHealth intervention is an effective means to support employees who have to cope with irregular flight schedules and circadian disruption. This kind of intervention might therefore also be beneficial for other working populations with irregular working hours.

Review of the Semiconductor Industry and Technology Roadmap.

Science.gov (United States)

Kumar, Sameer; Krenner, Nicole

2002-01-01

Points out that the semiconductor industry is extremely competitive and requires ongoing technological advances to improve performance while reducing costs to remain competitive and how essential it is to gain an understanding of important facets of the industry. Provides an overview of the initial and current semiconductor technology roadmap that…

A proposal for improving data center management through strategic implementation of Server virtualization technology to support Malaysian Nuclear Agency's activities

International Nuclear Information System (INIS)

Mohamad Safuan Sulaiman; Abdul Muin Abdul Rahman; Raja Murzaferi Raja Moktar; Saaidi Ismail

2010-01-01

Management of servers in Nuclear Malaysia's data center poses a big challenge to IT Center as well as to the general management. Traditional server management techniques have been used to provide reliable and continuous support for the ever increasing services and applications demanded by researchers and the other staffs of Nuclear Malaysia. Data centers are cost centers which need logistical support such as electricity, air conditioning, room space, manpower and other resources. To save cost and comply with Green Technology while maintaining or improving the level of services, a new concept called server virtualization is proposed and a feasibility study of this technology has been initiated to explore its potential to accommodate IT centers ever demanding services while reducing the need for such logistical supports, hence adhering to the Green IT concept. Server virtualization is a new technology where a single high performance physical server can host multiple high processing services, and different types operating systems with different hardware and software requirements which are traditionally performed by multiple server machines. This paper briefly explains server virtualization concepts, tools and techniques and proposes an implementation strategy of the technology for Nuclear Malaysia's data center. (author)

Turbine airfoil manufacturing technology

Energy Technology Data Exchange (ETDEWEB)

Kortovich, C. [PCC Airfoils, Inc., Beachwood, OH (United States)

1995-12-31

The specific goal of this program is to define manufacturing methods that will allow single crystal technology to be applied to complex-cored airfoils components for power generation applications. Tasks addressed include: alloy melt practice to reduce the sulfur content; improvement of casting process; core materials design; and grain orientation control.

Using Technology to Improve the Objectivity of Criminal Responsibility Evaluations.

Science.gov (United States)

Vitacco, Michael J; Gottfried, Emily D; Batastini, Ashley B

2018-03-01

Criminal responsibility (or insanity) evaluations require forensic clinicians to reconstruct a defendant's decision-making abilities, behavioral control, and emotional state at the time of the criminal act. Forensic evaluators are ultimately tasked to evaluate whether an individual had the capacity to understand right from wrong, and in some jurisdictions, determine whether the defendant lacked substantial capacity to conform his behavior to the requirements of the law as a result of a threshold condition (e.g., mental illness). Insanity evaluations are inherently complex, because they require the clinician to determine someone's mental state at some point in the past (weeks, months, or even years). Recent research on insanity evaluations underscores significant problems with the reliability and validity of these evaluations. However, technological advances including social media (e.g., Facebook and Twitter), mandating that law enforcement videotape interrogations, and the use of body and dashboard cameras can aid clinicians in improving the precision and quality of insanity evaluations. This article discusses practical guidelines and ethics-related concerns regarding the use of technology to improve the objectivity of criminal responsibility evaluations. © 2018 American Academy of Psychiatry and the Law.

Accelerating Project and Process Improvement using Advanced Software Simulation Technology: From the Office to the Enterprise

Science.gov (United States)

2010-04-29

Technology: From the Office Larry Smith Software Technology Support Center to the Enterprise 517 SMXS/MXDEA 6022 Fir Avenue Hill AFB, UT 84056 801...2010 to 00-00-2010 4. TITLE AND SUBTITLE Accelerating Project and Process Improvement using Advanced Software Simulation Technology: From the Office to

Energy efficiency improvement and environment in China

International Nuclear Information System (INIS)

Rouhier, Stephane

2010-01-01

Massive reliance on polluting sources of energy (coal, traditional biomass and oil) has damaged the environment in China over years. Now, China is the world's first carbon dioxide emitter and air pollution represents between 2 and 7 percent of loss of Gross Domestic Product per year, depending on the studies chosen. In order to reduce the level of pollution, one can either enhance the technology in use or reduce the share of polluting fuels in the energy mix. Indeed, current Chinese technologies are far less efficient than those of developed countries and the energy mix is massively composed of polluting sources of energy. So, they both represent huge potential savings. This article enquires the link between diversification, efficiency in the power sector and the per capita emissions and shows that emissions are negatively correlated to a diversification of the energy mix as well as an improvement of power generating technologies. Hence, it justifies the diversification of the energy mix and technology improvement as viable strategies to tackle pollution

Improving Warehouse Inventory Management Through Rfid, Barcoding and Robotics Technologies

Science.gov (United States)

2014-12-01

analysis and feasibility study on the use of RFID technology in the DLA’s distribution centers to improve inventory management and order processing . In...efficiency in receipt, order processing , and distribution for the DLA. 3 II. BACKGROUND A. SUPPLY CHAIN MANAGEMENT IN THE DEPARTMENT OF DEFENSE...of equipment and supplies. It experiences multiple challenges in inventory management and order processing , resulting in high associated costs. The

A Single-Phase Current Source Solar Inverter with Constant Instantaneous Power, Improved Reliability, and Reduced-Size DC-Link Filter

Science.gov (United States)

Bush, Craig R.

This dissertation presents a novel current source converter topology that is primarily intended for single-phase photovoltaic (PV) applications. In comparison with the existing PV inverter technology, the salient features of the proposed topology are: a) the low frequency (double of line frequency) ripple that is common to single-phase inverters is greatly reduced; b) the absence of low frequency ripple enables significantly reduced size pass components to achieve necessary DC-link stiffness and c) improved maximum power point tracking (MPPT) performance is readily achieved due to the tightened current ripple even with reduced-size passive components. The proposed topology does not utilize any electrolytic capacitors. Instead an inductor is used as the DC-link filter and reliable AC film capacitors are utilized for the filter and auxiliary capacitor. The proposed topology has a life expectancy on par with PV panels. The proposed modulation technique can be used for any current source inverter where an unbalanced three-phase operation is desires such as active filters and power controllers. The proposed topology is ready for the next phase of microgrid and power system controllers in that it accepts reactive power commands. This work presents the proposed topology and its working principle supported by with numerical verifications and hardware results. Conclusions and future work are also presented.

GROUP TECHNOLOGY IN CONTEXT OF THE PRODUCT CLASSIFICATION

Directory of Open Access Journals (Sweden)

Lenka Debnárová

2014-03-01

Full Text Available In the intensive competitive environment of the global economy, the survival of even the most well-established the world manufacturers depends on the ability to improve continuously quality while reducing costs. The resulting higher productivity is the key to market leadership and gaining sustainable competitive advantage. This paper outlines a group technology and classification of products which improve productivity, quality, inventory management of a company and reduce production times.

Challenges of technological trends in nursing and coping strategies ...

African Journals Online (AJOL)

Background: Technology in nursing has been shown to reduce redundancy and improve efficiency of work. Information Communication and technology (ICT) incorporation in nursing at Kenyatta national Hospital (KNH) has been ongoing for some years yet the uptake seemingly is slow. Challenges that could be associated ...

Analyzing the Effect of Technology-Based Intervention in Language Laboratory to Improve Listening Skills of First Year Engineering Students

Directory of Open Access Journals (Sweden)

Pasupathi Madhumathi

2013-04-01

Full Text Available First year students pursuing engineering education face problems with their listening skills. Most of the Indian schools use a bilingual method for teaching subjects from primary school through high school. Nonetheless, students entering university education develop anxiety in listening to classroomlectures in English. This article reports an exploratory study that aimed to find out whether the listening competences of students improved when technology was deployed in language laboratory. It also investigated the opinions of the students about using teacher-suggested websites for acquiring listening skills. The results of the study indicated that the use of technology in a language laboratory for training students in listening competences had reduced the anxiety of the students when listening to English. Further, there was a significant improvement on the part of students in acquiring listening skills through technology-based intervention.Muchos estudiantes de ingeniería de primer año en India tienen problemas con sus habilidades de escucha en inglés; experimentan ansiedad al momento de escuchar conferencias en inglés, pese a que provienen de colegios donde se sigue un modelo bilingüe para enseñar materias desde la primariahasta la secundaria. Con el objetivo de averiguar si las competencias de escucha de los estudiantes mejoran cuando se introduce la tecnología en el laboratorio de idiomas, se realizó un estudio exploratorio en el que se tuvieron en cuenta las opiniones de los estudiantes acerca del uso de sitios web sugeridos por el docente para adquirir habilidades de escucha. Los resultados indican que el uso de la tecnología en el laboratorio de idiomas reduce la ansiedad de los estudiantes al momento de escuchar conferencias en inglés y que progresan significativamente en sus habilidades de escucha.

Technologies for improving the availability of current and future light water reactors

International Nuclear Information System (INIS)

Pedersen, T.

2000-01-01

Construction of nuclear power plants involves large investments, much larger than for most alternatives for large-scale energy production. This is in particular valid when compared with the capital needed for building gas-fired power plants in areas or countries with an established infrastructure for distribution of natural gas. On the other hand, the fuel costs for a nuclear power plant are very low compared to the costs for natural gas and other alternatives, which means that the generation costs per kWhe of well performing nuclear power plants can be fully competitive. To this end, nuclear power plant owners and operators have been looking carefully at ways and means to achieve improvements with respect to power generation reliability and costs by equipment modernisation and/or modified procedures. In some countries, this has resulted in significant re-investments of revenues for modernisation programmes. In recent years, many such programmes have slowed down or been postponed due to reduced revenues in the wake of dramatic drop in electricity prices following deregulation. Typical areas of modernisation range from replacement of components or equipment to modification of system arrangements and structures, as well as introduction of new I and C systems and technology, for single functions or systems, or for the whole plant. Operating experience from well performing plants is compiled by utility organisations such as WANO (World Association of Nuclear Operators), EPRI (Electric Power Research Institute) and the EUR (European Utility Requirements) group, and also by the different nuclear vendors to serve as input for modifications and improvements in operating plants, and also as guidance for the design of new plants. A number of measures taken to overcome observed deficiencies and difficulties, suggestions for future improvements, and also implementation of specific design features were presented at the IAEA Technical Committee Meeting at Argonne National

Survey of subjects on the geothermal technology development aiming at marked improvement of economical efficiency; Keizaisei no hiyakuteki kojo to mezashita chinetsu gijutsu kaihatsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the purpose of reducing the geothermal development cost and increasing the amount of developable resource, the paper reviewed the geothermal developmental technology. Approximately 30 MW as a scale per unit is economical. The development cost is lowered by 2% if the period for development is shortened by two years, by 11% if the utilization rate is increased by 10%, and by 3% if the success rate is increased by 10%. The cost is reduced by 10% if the steam amount per 1 pit is increased to 1.5 times, and by 4% if the reduction amount is increased to 1.5 times. Improvement of survey/exploration/evaluation technology and improvement of power generation/management technology contribute largely to making the above possible. The drilling depth also corresponds with increases in the amount of steam obtained and the cost. The construction cost including the drilling cost is also an important factor, indicating a cost reduction of 15% if the unit price is reduced by 20%. If a 30% reduction of the power generation cost at a 30MW plant can be made, a 10 yen/kWh is realized, which shows that a geothermal power plant can be competitive with a thermal power plant. When thinking of it without subsidies, the geothermal power generation is most economical of all the renewable energy. In the light of the environment, the CO2 issue, etc., the geothermal power generation is much more advantageous than the thermal power generation. 7 refs., 28 figs., 8 tabs.

Research on the improvement of nuclear safety

International Nuclear Information System (INIS)

Yoo, Keon Joong; Kim, Dong Soo; Kim, Hui Dong; Park, Chang Kyu

1993-06-01

To improve the nuclear safety, this project is divided into three areas which are the development of safety analysis technology, the development of severe accident analysis technology and the development of integrated safety assessment technology. 1. The development of safety analysis technology. The present research aims at the development of necessary technologies for nuclear safety analysis in Korea. Establishment of the safety analysis technologies enables to reduce the expenditure both by eliminating excessive conservatisms incorporated in nuclear reactor design and by increasing safety margins in operation. It also contributes to improving plant safety through realistic analyses of the Emergency Operating Procedures (EOP). 2. The development of severe accident analysis technology. By the computer codes (MELCOR and CONTAIN), the in-vessel and the ex-vessel severe accident phenomena are simulated. 3. The development of integrated safety assessment technology. In the development of integrated safety assessment techniques, the included research areas are the improvement of PSA computer codes, the basic study on the methodology for human reliability analysis (HRA) and common cause failure (CCF). For the development of the level 2 PSA computer code, the basic research for the interface between level 1 and 2 PSA, the methodology for the treatment of containment event tree are performed. Also the new technologies such as artificial intelligence, object-oriented programming techniques are used for the improvement of computer code and the assessment techniques

Reducing the fuel use and greenhouse gas emissions of the US vehicle fleet

International Nuclear Information System (INIS)

Bandivadekar, Anup; Cheah, Lynette; Evans, Christopher; Groode, Tiffany; Heywood, John; Kasseris, Emmanuel; Kromer, Matthew; Weiss, Malcolm

2008-01-01

The unrelenting increase in the consumption of oil in the US light-duty vehicle fleet (cars and light trucks) presents an extremely challenging energy and environmental problem. A variety of propulsion technologies and fuels have the promise to reduce petroleum use and greenhouse gas emissions from motor vehicles. Even so, achieving a noticeable reduction on both fronts in the near term will require rapid penetration of these technologies into the vehicle fleet, and not all alternatives can meet both objectives simultaneously. Placing a much greater emphasis on reducing fuel consumption rather than improving vehicle performance can greatly reduce the required market penetration rates. Addressing the vehicle performance-size-fuel consumption trade-off should be the priority for policymakers rather than promoting specific vehicle technologies and fuels

New heavy crude oil flow improver increases delivery : application scenarios

Energy Technology Data Exchange (ETDEWEB)

Pierce, J.; Johnston, R.; Lauzon, P. [ConocoPhillips Specialty Products Inc., Houston, TX (United States)

2009-07-01

Flow improvers or drag reducing agents have been used for over 25 years as a method to increase fluid flow in hydrocarbon pipelines. The technology is effective in refined projects, light and medium crude oils. This paper presented a new development in flow improver technology that allows treatment of heavy crude oil slates. It discussed case studies of flow improver treatment of heavy oils in various pipeline system as well as factors that affect commercial success. tabs., figs.

FACT : forgiving agent comfort technology

NARCIS (Netherlands)

Zeiler, W.; Wortel, W.; Kamphuis, I.G.; Akkermans, Hans; Jelsma, J.; Bakker, L.

2005-01-01

To further reduce energy consumption of office buildings, a new control technology is needed in which the end-user behaviour is integrated. Improvement of the energy consumption is offered by agent-based systems for energy management in buildings, as well as possibilities for enhancing the comfort

Improving Logistics Processes in Industry Using Web Technologies

Science.gov (United States)

Jánošík, Ján; Tanuška, Pavol; Václavová, Andrea

2016-12-01

The aim of this paper is to propose the concept of a system that takes advantage of web technologies and integrates them into the management process and management of internal stocks which may relate to external applications and creates the conditions to transform a Computerized Control of Warehouse Stock (CCWS) in the company. The importance of implementing CCWS is in the elimination of the claims caused by the human factor, as well as to allow the processing of information for analytical purposes and their subsequent use to improve internal processes. Using CCWS in the company would also facilitate better use of the potential tools Business Intelligence and Data Mining.

IMPROVING LOGISTICS SERVICES THROUGH THE TECHNOLOGY USED IN FLEET MANAGEMENT

Directory of Open Access Journals (Sweden)

Mauro Vivaldini

2012-12-01

Full Text Available Outsourcing logistics has established itself in the area of the LSP (Logistics Service Provider, which offers a range of services to its customers. In this line, transportation is characterized as one of the most important services, and therefore efficient fleet management is essential for establishing a high level of customer service. With advances in technology and vehicle tracking systems, this approach of management has gained new possibilities for the improvement of logistics services. By studying the specific case of an LSP, this paper investigates the use of these technologies in the management of their business and services. The results indicate that the LSP seeks to increase its services and to streamline information in order to respond to customer needs in real time. It is also evident in this case under study that the combination of the technology available together with the fleet management system has become a distinguishing feature for this LSP, one which increases their skills and important information for both customers and business.

An assessment of advanced displays and controls technology applicable to future space transportation systems

Science.gov (United States)

Hatfield, Jack J.; Villarreal, Diana

1990-01-01

The topic of advanced display and control technology is addressed along with the major objectives of this technology, the current state of the art, major accomplishments, research programs and facilities, future trends, technology issues, space transportation systems applications and projected technology readiness for those applications. The holes that may exist between the technology needs of the transportation systems versus the research that is currently under way are addressed, and cultural changes that might facilitate the incorporation of these advanced technologies into future space transportation systems are recommended. Some of the objectives are to reduce life cycle costs, improve reliability and fault tolerance, use of standards for the incorporation of advancing technology, and reduction of weight, volume and power. Pilot workload can be reduced and the pilot's situational awareness can be improved, which would result in improved flight safety and operating efficiency. This could be accomplished through the use of integrated, electronic pictorial displays, consolidated controls, artificial intelligence, and human centered automation tools. The Orbiter Glass Cockpit Display is an example examined.

Technologies for improving current and future light water reactor operation and maintenance: Development on the basis of experience. Proceedings of a technical committee meeting

International Nuclear Information System (INIS)

2000-09-01

Application of efficient technologies for improving operation and maintenance of nuclear power plants is an important element for assuring their economic competitiveness with other means of generating electricity. The competitive environment, which nuclear power plant operators face in many countries as a result of de-regulation of the electricity market, imposes cost pressures that must be met while at the same time satisfying stringent safety requirements. Further, as currently operating plants age, proper management includes development and application of better technologies for inspection, maintenance and repair. For future plants, the opportunity exists during the design phase to incorporate design features for performing efficient inspection, maintenance and repairs. Despite the prevailing low prices of fossil fuels, the generation costs of nuclear electricity continue to be competitive with electricity generation costs from fossil-fuelled plants for base load generation in several countries. For nuclear power, the capital investment component of electricity generation cost is relatively high, while the nuclear fuel cycle cost is - and is expected to remain - relatively low. The prices of fossil fuels are fairly low today but are likely to increase over the long term because the resource is limited. Moreover, governments may introduce incentives to reduce the use of fossil fuels in order to protect the environment. In many countries, nuclear utilities are experiencing increased competition with other sources of electricity production due to deregulation of the electricity market, and nuclear plant operators can no longer pass along the generation costs to consumers through regulated electricity rates. This competitive environment has significant implications for plant operations to achieve efficient use of all resources, and to effectively manage plant activities including outages and maintenance. Over the past several years, steady improvements have been

Technologies for improving current and future light water reactor operation and maintenance: Development on the basis of experience. Proceedings of a technical committee meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

Application of efficient technologies for improving operation and maintenance of nuclear power plants is an important element for assuring their economic competitiveness with other means of generating electricity. The competitive environment, which nuclear power plant operators face in many countries as a result of de-regulation of the electricity market, imposes cost pressures that must be met while at the same time satisfying stringent safety requirements. Further, as currently operating plants age, proper management includes development and application of better technologies for inspection, maintenance and repair. For future plants, the opportunity exists during the design phase to incorporate design features for performing efficient inspection, maintenance and repairs. Despite the prevailing low prices of fossil fuels, the generation costs of nuclear electricity continue to be competitive with electricity generation costs from fossil-fuelled plants for base load generation in several countries. For nuclear power, the capital investment component of electricity generation cost is relatively high, while the nuclear fuel cycle cost is - and is expected to remain - relatively low. The prices of fossil fuels are fairly low today but are likely to increase over the long term because the resource is limited. Moreover, governments may introduce incentives to reduce the use of fossil fuels in order to protect the environment. In many countries, nuclear utilities are experiencing increased competition with other sources of electricity production due to deregulation of the electricity market, and nuclear plant operators can no longer pass along the generation costs to consumers through regulated electricity rates. This competitive environment has significant implications for plant operations to achieve efficient use of all resources, and to effectively manage plant activities including outages and maintenance. Over the past several years, steady improvements have been

Mission possible: creating a technology infrastructure to help reduce administrative costs.

Science.gov (United States)

Alper, Michael

2003-01-01

Controlling administrative costs associated with managed care benefits has traditionally been considered a "mission impossible" in healthcare, with the unreasonably high cost of paperwork and administration pushing past the $420 billion mark. Why administrative costs remain a critical problem in healthcare while other industries have alleviated their administrative burdens must be carefully examined. This article looks at the key factors contributing to high administrative costs and how these costs can be controlled in the future with "mission possible" tools, including business process outsourcing, IT outsourcing, technology that helps to bring "consumerism" to managed care, and an IT infrastructure that improves quality and outcomes.

Improved distribution and reduced toxicity of adriamycin bound to albumin-heparin microspheres

NARCIS (Netherlands)

Cremers, Harry; Cremers, H.F.M.; Bayon, L.G.; Verrijk, R.; Wesseling, M.M.; Wondergem, J.; Heuff, G.; Kwon, G.S.; Bae, Y.H.; Feijen, Jan; Kim, S.W.

1995-01-01

Adriamycin (ADR) was formulated in albumin-heparin conjugate microspheres (AHCMS) to improve site-specific delivery and to reduce the toxicity of the drug. The effect of formulating ADR in AHCMS was investigated upon intrahepatic administration to male Wag/Rij rats. After intraveno-portal (i.v.p.)

Advanced clean coal utilization technologies

Energy Technology Data Exchange (ETDEWEB)

Moritomi, Hiroshi [National Inst. for Resources and Environment, Tsukuba, Ibaraki (Japan)

1993-12-31

The most important greenhouse gas is CO{sub 2} from coal utilization. Ways of mitigating CO{sub 2} emissions include the use of alternative fuels, using renewable resources and increasing the efficiency of power generation and end use. Adding to such greenhouse gas mitigation technologies, post combustion control by removing CO{sub 2} from power station flue gases and then storing or disposing it will be available. Although the post combustion control have to be evaluated in a systematic manner relating them to whether they are presently available technology, to be available in the near future or long term prospects requiring considerable development, it is considered to be a less promising option owing to the high cost and energy penalty. By contrast, abatement technologies aimed at improving conversion efficiency or reducing energy consumption will reduce emissions while having their own commercial justification.

Improvement of condition-based maintenance technology by utilization of thermography

International Nuclear Information System (INIS)

Shimada, Hiroki

2004-01-01

In the United States, condition-based maintenance technology comprising IR thermography (hereafter ''thermography'' for short) has been regarded in recent years as the established means for effectively improvement the performance of accident-preventive measures for nuclear power stations. As very few nuclear power plants in Japan have been utilizing the technology, measures for allowing power station personnel to use the technology with ease have been studied on an empirical basis. First, in view of improving the measuring efficiency to determine temperatures more accurately with a single measurement, principal factors affecting the measured temperature values have been analyzed. As a result, it has been found effective for accurate temperature measurement to make use of the table to radiation rates that have been determined for each facility coating specification by using a black body tape and to determine the measuring spot by avoiding rear heat sources (influence of reflection ratio) and background noise (influence of scattered light). Concurrently, as a result of determining the IR attenuation in the atmosphere, thermographic measurement has been found feasible without any significant attenuation as long as the distance is below 10 meters. Further, every power station facility (mainly electrical facilities) that is immune to thermography has been identified. These study results have been documented in the form of the ''Thermography Measurement Manual'' by also including in it the descriptions on abnormal thermal images and the judgment criteria at elevated temperatures that have been used in the United States. Based on these accomplishments, condition-based maintenance technology employing thermography has been applied to on-site investigation of nuclear power stations, and the effectiveness of thermography-aided accident-prevention has been demonstrated by detecting locally temperature rising spots of power cable joints. Moreover, with respect to maintenance

Advancing CANDU Technology Through R and D

International Nuclear Information System (INIS)

Torgerson, David F.

1993-01-01

CANDU reactors are evolving to meet future requirements using incremental changes as opposed to revolutionary design changes. The main elements for advancing the technology reducing capital and operating, increasing capacity factors, increasing passive safety, and enhancing fuel/fuel cycle flexibility. These elements are being addressed by carrying out research and development in the areas of safety, plant systems and components, heavy water production, information technology, fuel channels, and fuel/fuel cycle technology. In safety, the focus is on using the inherent features of CANDU to enhance passive or natural safety concepts, such as the use of the moderator as an effective heat sink, and the development of advanced fuels to improve critical heat flux and to reduce source terms. Plant systems and components work includes improvements to plant systems such as steam generators, heat exchangers, pump seals, and advanced control room technology. Heavy water processes are being developed that can be used with existing hydrogen production plants, or that can be used in a stand-alone mode. Information technology is being developed to cover all aspects of CANDU design, construction, and operation. Fuel channel improvements include elucidation and application of basic materials science for life extension, and the development of advanced non-destructive examination methods. Fuel and fuel cycle work is focusing on LWR/CANDU synergy, such as the use of recovered uranium and the direct use of spent PWR fuel in CANDU reactor, advanced fuels to improve burnup and economics (e. g., the joint AECB/KAERI Conflux program), and low void reactivity fuel to enhance passive safety. This paper gives an overview of some of the R and D supporting these activities, with particular emphasis on Alice's vision for advancing CANDU technology over the next 10 years

Improving the plunge grinding technology efficiency through a rigid scheme use

Directory of Open Access Journals (Sweden)

І. О. Рябенков

2016-07-01

Full Text Available Theoretical bases of grinding technology researches results form the basis of this work. It has been shown that grinding efficiency increase can be achieved through the use of new kinematic grinding schemes and progressive designs of abrasive tools. However, not enough attention is paid to the calculation of the main technological machining parameters with due regard to separate processes of cutting and friction at grinding, thus restricting the effective application of these kinematic grinding schemes and scientifically grounded selection of optimal processing conditions. In this paper a mathematical model has been developed for determining the material removal rate and cutting force at plunge grinding, what made it possible to substantiate reducing the power strength at grinding and to increase productivity. Calculations revealed that the cutting force at plunge grinding is conditioned by the disk bond friction against the material being processed, the intensity of which in the course of processing time increases proportionally due to an increase of elastic movements in the technological system. Proceeding from these results the optimum grinding conditions based on the use of the abrasive disk that works under self-sharpening conditions, thus eliminating the disk bond friction against the material being processed, have been grounded. In this case, the abrasive disk provides complete removal of the processed material supplied to the cutting zone at the nominal speed of a workpiece movement. Also the ability to reduce cutting forces through the increase of the disk speed and the workpiece speed ratio has been shown

Memorandum on the use of information technology to improve medication safety.

Science.gov (United States)

Ammenwerth, E; Aly, A-F; Bürkle, T; Christ, P; Dormann, H; Friesdorf, W; Haas, C; Haefeli, W E; Jeske, M; Kaltschmidt, J; Menges, K; Möller, H; Neubert, A; Rascher, W; Reichert, H; Schuler, J; Schreier, G; Schulz, S; Seidling, H M; Stühlinger, W; Criegee-Rieck, M

2014-01-01

Information technology in health care has a clear potential to improve the quality and efficiency of health care, especially in the area of medication processes. On the other hand, existing studies show possible adverse effects on patient safety when IT for medication-related processes is developed, introduced or used inappropriately. To summarize definitions and observations on IT usage in pharmacotherapy and to derive recommendations and future research priorities for decision makers and domain experts. This memorandum was developed in a consensus-based iterative process that included workshops and e-mail discussions among 21 experts coordinated by the Drug Information Systems Working Group of the German Society for Medical Informatics, Biometry and Epidemiology (GMDS). The recommendations address, among other things, a stepwise and comprehensive strategy for IT usage in medication processes, the integration of contextual information for alert generation, the involvement of patients, the semantic integration of information resources, usability and adaptability of IT solutions, and the need for their continuous evaluation. Information technology can help to improve medication safety. However, challenges remain regarding access to information, quality of information, and measurable benefits.

A selective study of Information technologies to improve operations efficiency in construction

Directory of Open Access Journals (Sweden)

Konikov Alexandr

2018-01-01

Full Text Available Today, information technologies (IT are used in almost every production industry. While the aspects of IT are well studied and discussed in relevant monographs, articles, web sources, etc., this paper reviews the performance improvement options in the construction industry by leveraging IT. From a wide range of information technologies the author has picked the most relevant solutions, from his point of view, based on several considerations, the most important one being the lack of adequate attention to these technologies specifically in the construction industry. The paper covers the following technologies: Big Data (a smart technology for high-speed processing of huge and diverse data arrays; situation centers (SC for construction and operations projects (SCs are successfully used in other industries for operating control of sophisticated facilities; data warehouses (DW for the construction industry (DWs are viewed as a standalone project rather than a supplement to Data Mining or Big Data; operational and dispatch radio communication service (radio communication can ensure instant connectivity between several subscribers; VSAT (a satellite technology for prompt connection of a distant construction site with the 'outer world' when no alternatives are available. The paper briefly presents the essence of each technology, describes the pre-requisites for its use in construction, outlines the key advantages, limits and shortcomings, and lists construction projects where it shall be worthwhile to use a specific technology projects.

An integrated approach for developing a technology strategy framework for small- to medium-sized furniture manufacturers to improve competitiveness

Directory of Open Access Journals (Sweden)

Lourens, A.S.

2013-05-01

Full Text Available Low-technology firms, such as those found within the furniture manufacturing industry, have no framework or methodology to guide them successfully to acquire and integrate technology that enables them to operate more competitively. The aim of this article is to illustrate the development of a technology strategy framework for small- to medium-sized furniture manufacturers to assist them to improve their competitiveness. More specifically, this article presents an integrated technology strategy framework that enables management to integrate their business strategy with their technology requirements successfully, thus improving competitiveness.

Farm-economic analysis of reducing antimicrobial use whilst adopting improved management strategies on farrow-to-finish pig farms.

Science.gov (United States)

Rojo-Gimeno, Cristina; Postma, Merel; Dewulf, Jeroen; Hogeveen, Henk; Lauwers, Ludwig; Wauters, Erwin

2016-07-01

Due to increasing public health concerns that food animals could be reservoirs for antibiotic resistant organisms, calls for reduced current antibiotic use on farms are growing. Nevertheless, it is challenging for farmers to perform this reduction without negatively affecting technical and economic performance. As an alternative, improved management practices based on biosecurity and vaccinations have been proven useful to reduce antimicrobial use without lowering productivity, but issues with insufficient experimental design possibilities have hindered economic analysis. In the present study a quasi-experimental approach was used for assessing the economic impact of reduction of antimicrobial use coupled with improved management strategies, particularly biosecurity strategies. The research was performed on farrow-to-finish pig farms in Flanders (northern region of Belgium). First, to account for technological progress and to avoid selection bias, propensity score analysis was used to compare data on technical parameters. The treatment group (n=48) participated in an intervention study whose aim was to improve management practices to reduce the need for use of antimicrobials. Before and after the change in management, data were collected on the technical parameters, biosecurity status, antimicrobial use, and vaccinations. Treated farms were matched without replacement with control farms (n=69), obtained from the Farm Accountancy Data Network, to estimate the difference in differences (DID) of the technical parameters. Second, the technical parameters' DID, together with the estimated costs of the management intervention and the price volatility of the feed, meat of the finisher pigs, and piglets served as a basis for modelling the profit of 11 virtual farrow-to-finish pig farms representative of the Flemish sector. Costs incurred by new biosecurity measures (median +€3.96/sow/year), and new vaccinations (median €0.00/sow/year) did not exceed the cost reduction

The model for the strategic management of technology. The improvement cycle and matrixes deployment QFD

International Nuclear Information System (INIS)

Benavides Velasco, C. A.; Quintana Garcia, C.

2007-01-01

In spite of the importance of innovative firms, few contributions study in depth the strategic management of their technological resources. After describing the process of strategic management of technology, we propose a model that enables the application of that process and guarantees organizational flexibility in technological companies. For it, such a process has been adapted to She wart cycle (Deeming wheel) and combined with the quality function deployment (QFD). As a result, we propose the improvement cycle of technology. It contains two matrixes that allow identifying and prioritizing with greater clarity the activities related to the management of technological resources. (Authors)

THE INTENTIONAL USE OF LEARNING TECHNOLOGIES TO IMPROVE LEARNING OUTCOMES IN STUDIO.

Directory of Open Access Journals (Sweden)

Andrew MacKenzie

2017-01-01

Full Text Available At the University of Canberra, Australia, the design and architecture faculty are trialling a range of approaches to incorporating learning technologies in the first year foundation studio to improve student learning outcomes. For this study researchers collected information on students’ access to their assignment information and feedback from the learning management system (LMS to discover how the students engaged in the design process. The studio curriculum was designed to encourage students to engage in a convergence, divergence dynamic (Brown, 2009; Thomas, Billsberry, Ambrosini, & Barton, 2014 in developing their own understanding of the design process. The staff tailored around points of convergence, online instruction, assessment tools and feedback in studio. We argue that using learning technologies in this way can improve intentionality at the beginning of semester, enhance students understanding of feedback and facilitate a more iterative approach to problem based learning in studio practice.

ALTERNATIVE METHODS OF TECHNOLOGICAL PROCESSING TO REDUCE SALT IN MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

E. K. Tunieva

2017-01-01

Full Text Available The world trends in table salt reduction in meat products contemplate the use of different methods for preservation of taste and consistency in finished products as well as shelf life prolongation. There are several approaches to a sodium chloride reduction in meat products. The paper presents a review of the foreign studies that give evidence of the possibility to maintain quality of traditional meat products produced with the reduced salt content. The studies in the field of salty taste perception established that a decrease in a salt crystal size to 20 µm enabled reducing an amount of added table salt due to an increase in the salty taste intensity in food products. Investigation of the compatibility of different taste directions is also interesting as one of the approaches to a sodium chloride reduction in food products. The use of water-in-oil-in-water (w/o/w double emulsions allows controlling a release of encapsulated ingredients (salt, which enables enhancement of salty taste. The other alternative method of technological processing of meat raw material for reducing salt in meat products is the use of high pressure processing. This method has several advantages and allows not only an increase in the salty taste intensity, but also formation of a stable emulsion, an increase in water binding capacity of minced meat and extension of shelf-life.

COPPER CABLE RECYCLING TECHNOLOGY

International Nuclear Information System (INIS)

Chelsea Hubbard

2001-01-01

The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in deactivation and decommissioning (D and D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors large-scale demonstration and deployment projects (LSDDPs). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased costs of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) generated a list of statements defining specific needs and problems where improved technology could be incorporated into ongoing D and D tasks. One such need is to reduce the volume of waste copper wire and cable generated by D and D. Deactivation and decommissioning activities of nuclear facilities generates hundreds of tons of contaminated copper cable, which are sent to radioactive waste disposal sites. The Copper Cable Recycling Technology separates the clean copper from contaminated insulation and dust materials in these cables. The recovered copper can then be reclaimed and, more importantly, landfill disposal volumes can be reduced. The existing baseline technology for disposing radioactively contaminated cables is to package the cables in wooden storage boxes and dispose of the cables in radioactive waste disposal sites. The Copper Cable Recycling Technology is applicable to facility decommissioning projects at many Department of Energy (DOE) nuclear facilities and commercial nuclear power plants undergoing decommissioning activities. The INEEL Copper Cable Recycling Technology Demonstration investigated the effectiveness and efficiency to recycle 13.5 tons of copper cable. To determine the effectiveness

Improving Teachers' Teaching with Communication Technology

Science.gov (United States)

Chen, Li-Ling

2012-01-01

With the growing needs to address the challenges that new teachers face and the popularity of social networking technology, this study explores how to increase the effectives of teaching through the use of such technology, and how the technology may serve to promote collaboration and open new resources of support in public education. In this…

Implications of using clean technologies to power selected ASEAN countries

International Nuclear Information System (INIS)

Das, Anjana; Ahlgren, Erik O.

2010-01-01

This paper focuses on energy system development of the three largest Association of South East Asian Nations (ASEAN) countries: Indonesia, Philippines and Vietnam. The energy infrastructures in these counties are in the process of rapid development and, therefore, technology choices are critical. Applying the energy system model MARKAL and scenario analysis, this paper examines and quantifies the role of clean and advanced energy technologies for efficient local resource exploitation and improving energy security and environmental conditions. The main focus is on the power sector and the paper also addresses the potential ASEAN markets for European energy technologies. The paper concludes that there is a large potential market for clean and advanced energy technologies in the studied countries. If adopted, these technologies will bring several benefits like reduction in primary energy requirement, reduced investments requirement in the power sector and other parts of the energy infrastructure, reduced import of primary energy, reduced CO 2 emissions and local pollution, reduced energy system costs and marginal cost of electricity supply. Finally, barriers for transfer and diffusion of advanced energy technologies are discussed.

Reducing Anxiety and Improving Engagement in Health Care Providers Through an Auricular Acupuncture Intervention.

Science.gov (United States)

Buchanan, Teresa M; Reilly, Patricia M; Vafides, Carol; Dykes, Patricia

Stress and anxiety are experienced by health care providers as a consequence of caregiving and may result in physical, emotional, and psychological outcomes that negatively impact work engagement. The purpose of this study was to determine whether auricular acupuncture can reduce provider anxiety and improve work engagement. Study participants received 5 auricular acupuncture sessions within a 16-week period utilizing the National Acupuncture Detoxification Association protocol for treating emotional trauma. Each participant completed the State-Trait Anxiety Inventory and the Utrecht Work Engagement Scale (UWES-9) prior to their first session and again after their fifth treatment. Significant reductions were found in state and trait anxiety (State-Trait Anxiety Inventory), as well as significant increases in the overall scores on the UWES as compared with baseline. Only the dedication subcategory of the UWES showed significant improvement. Engagement has been linked to increased productivity and well-being and improved patient and organizational outcomes. Providing effective strategies such as auricular acupuncture to support health care providers in reducing anxiety in the workplace may improve engagement.

New technology on Otto engines for reducing the exhaust emission toxicity

International Nuclear Information System (INIS)

Mikarovska, Vesna; Stojanovski, Vasko

2003-01-01

The exhaust emission from the Otto engines with internal combustion contains a lot of toxicant components for human being as well as for the surrounding. There are a lot of possibilities to realize the engine work with minimum emission of toxicant components. However, all solutions could not be racial, especially if the engine should work with minimum fuel consumption. The engineers look for the solutions where the reducing of the exhaust emission toxicity could be done with the total fuel utilization in the engine's cylinder, without additionally combustion in catalytic or thermal reactors. The paper describes the new technologies for detail investigation of the combustion processes and optimization of all influence parameters on exhaust gases emission. (Original)

Cyclo-speed reducer 6000 series; Saikuro {reg_sign} gensokuki 6000 series

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-04-20

This series was put on the market as the advanced speed reducer '6000 series' in April, 2000 after further improvement of various previous excellent features by adopting innovative technologies. Various series of this cyclo-speed reducers adopting a unique inscribed epicyclic gear mechanism reach 7 million units in sales success. Main specifications: (1) Input capacity range: 0.1-132kW, (2) Output torque: 24-68,200N(center dot)m, (3) Reduction ratio: 6-1,000,000. Features: (1) High efficiency and long life by adopting the analysis system based on the latest analytical technology, (2) Noise reduction by a maximum of nearly 6dB, and tone improvement by adopting a new tooth profile, (3) Weight reduction by a maximum of nearly 40% by adopting a motor direct-coupled mechanism. (translated by NEDO)

Improving vaccine registries through mobile technologies: a vision for mobile enhanced Immunization information systems.

Science.gov (United States)

Wilson, Kumanan; Atkinson, Katherine M; Deeks, Shelley L; Crowcroft, Natasha S

2016-01-01

Immunization registries or information systems are critical to improving the quality and evaluating the ongoing success of immunization programs. However, the completeness of these systems is challenged by a myriad of factors including the fragmentation of vaccine administration, increasing mobility of individuals, new vaccine development, use of multiple products, and increasingly frequent changes in recommendations. Mobile technologies could offer a solution, which mitigates some of these challenges. Engaging individuals to have more control of their own immunization information using their mobile devices could improve the timeliness and accuracy of data in central immunization information systems. Other opportunities presented by mobile technologies that could be exploited to improve immunization information systems include mobile reporting of adverse events following immunization, the capacity to scan 2D barcodes, and enabling bidirectional communication between individuals and public health officials. Challenges to utilizing mobile solutions include ensuring privacy of data, access, and equity concerns, obtaining consent and ensuring adoption of technology at sufficiently high rates. By empowering individuals with their own health information, mobile technologies can also serve as a mechanism to transfer immunization information as individuals cross local, regional, and national borders. Ultimately, mobile enhanced immunization information systems can help realize the goal of the individual, the healthcare provider, and public health officials always having access to the same immunization information. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Advances in diaper technology

Directory of Open Access Journals (Sweden)

Sahana M Srinivas

2016-01-01

Full Text Available Diapering practices vary among different countries from the use of cloth diapers to the modern disposable diaper. In the last few decades, diaper technology has advanced significantly thus decreasing the prevalence of diaper dermatitis. Recent innovative techniques used in the manufacturing of diapers include incorporation of superabsorbent polymer gel that can absorb 30 times its weight in liquid. Recently, smart diapers have been developed which not only prevents diaper dermatitis but significantly has reduced the burden on parents. This article reviews how changes in disposable diaper technology have improved diapering practices.

[Genetic improvement of technological characteristics of starters for fermented milk products].

Science.gov (United States)

Oganesian, G G; Barsegian, A A; Grigorian, N G; Toptsian, A V

2010-01-01

Possibility for improvement of technological characteristics of lactobacilli using mutations of resistance to rifampicin (rif(r)) and streptomycin (str(r)) was studied. Using starter model of Narine Lactobacillus acidophilus INMIA-9602 Armenian diet milk product, it was showed that a possibility for selecting strains with increased rate of milk fermentation and acid production is higher in Rif(r) and Str(r) mutants induced by nitrosoguanidine than in cultures sensitive to antibiotics. The milk products obtained using Rif(r) and Str(r) strains had high viscosity, improved texture, increased amount of alive cells and good organoleptic features.

Research and Development Opportunities for Joining Technologies in HVAC&R

Energy Technology Data Exchange (ETDEWEB)

Goetzler, William [Navigant Consulting, Burlington, MA (United States); Guernsey, Matt [Navigant Consulting, Burlington, MA (United States); Young, Jim [Navigant Consulting, Burlington, MA (United States)

2015-10-01

The Building Technologies Office (BTO) works with researchers and industry partners to develop and deploy technologies that can substantially reduce energy consumption and greenhouse gas (GHG) emissions in residential and commercial buildings. This opportunity assessment aims to advance BTO’s energy savings, GHG reduction, and other program goals by identifying research and development (R&D) initiatives for joining technologies in heating, ventilation, air-conditioning, and refrigeration (HVAC&R) systems. Improving joining technologies for HVAC&R equipment has the potential to increase lifetime equipment operating efficiency, decrease equipment and project cost, and most importantly reduce hydroflourocarbon (HFC) refrigerant leakage to support HFC phasedown and GHG reduction goals.

Integrated Circuit Conception: A Wire Optimization Technic Reducing Interconnection Delay in Advanced Technology Nodes

Directory of Open Access Journals (Sweden)

Mohammed Darmi

2017-10-01

Full Text Available As we increasingly use advanced technology nodes to design integrated circuits (ICs, physical designers and electronic design automation (EDA providers are facing multiple challenges, firstly, to honor all physical constraints coming with cutting-edge technologies and, secondly, to achieve expected quality of results (QoR. An advanced technology should be able to bring better performances with minimum cost whatever the complexity. A high effort to develop out-of-the-box optimization techniques is more than needed. In this paper, we will introduce a new routing technique, with the objective to optimize timing, by only acting on routing topology, and without impacting the IC Area. In fact, the self-aligned double patterning (SADP technology offers an important difference on layer resistance between SADP and No-SADP layers; this property will be taken as an advantage to drive the global router to use No-SADP less resistive layers for critical nets. To prove the benefit on real test cases, we will use Mentor Graphics’ physical design EDA tool Nitro-SoC™ and several 7 nm technology node designs. The experiments show that worst negative slack (WNS and total negative slack (TNS improved up to 13% and 56%, respectively, compared to the baseline flow.

A methodology to determine the level of automation to improve the production process and reduce the ergonomics index

Science.gov (United States)

Chan-Amaya, Alejandro; Anaya-Pérez, María Elena; Benítez-Baltazar, Víctor Hugo

2017-08-01

Companies are constantly looking for improvements in productivity to increase their competitiveness. The use of automation technologies is a tool that have been proven to be effective to achieve this. There are companies that are not familiar with the process to acquire automation technologies, therefore, they abstain from investments and thereby miss the opportunity to take advantage of it. The present document proposes a methodology to determine the level of automation appropriate for the production process and thus minimize automation and improve production taking in consideration the ergonomics factor.

Technologies for Climate Change Mitigation - Agriculture Sector

DEFF Research Database (Denmark)

Uprety, D.C.; Dhar, Subash; Hongmin, Dong

This guidebook describes crop and livestock management technologies and practices that contribute to climate change mitigation while improving crop productivity, reducing reliance on synthetic fertilizers, and lowering water consumption. It is co-authored by internationally recognised experts...

Evaluating the enhancement and improvement of China's technology and financial services platform innovation strategy.

Science.gov (United States)

Wu, Ching-Sung; Hu, Kuang-Hua; Chen, Fu-Hsiang

2016-01-01

The development of high-tech industry has been prosperous around the world in past decades, while technology and finance have already become the most significant issues in the information era. While high-tech firms are a major force behind a country's economic development, it requires a lot of money for the development process, as well as the financing difficulties for its potential problems, thus, how to evaluate and establish appropriate technology and financial services platforms innovation strategy has become one of the most critical and difficult issues. Moreover, how the chosen intertwined financial environment can be optimized in order that high-tech firms financing problems can be decided has seldom been addressed. Thus, this research aims to establish a technology and financial services platform innovation strategy improvement model, as based on the hybrid MADM model, which addresses the main causal factors and amended priorities in order to strengthen ongoing planning. A DEMATEL technique, as based on Analytic Network Process, as well as modified VIKOR, will be proposed for selecting and re-configuring the aspired technology and financial services platform. An empirical study, as based on China's technology and financial services platform innovation strategy, will be provided for verifying the effectiveness of this proposed methodology. Based on expert interviews, technology and financial services platforms innovation strategy improvement should be made in the following order: credit guarantee platform ( C )_credit rating platform ( B )_investment and finance platform ( A ).

Reducing Channel Interaction Through Cochlear Implant Programming May Improve Speech Perception

Directory of Open Access Journals (Sweden)

Julie A. Bierer

2016-06-01

Full Text Available Speech perception among cochlear implant (CI listeners is highly variable. High degrees of channel interaction are associated with poorer speech understanding. Two methods for reducing channel interaction, focusing electrical fields, and deactivating subsets of channels were assessed by the change in vowel and consonant identification scores with different program settings. The main hypotheses were that (a focused stimulation will improve phoneme recognition and (b speech perception will improve when channels with high thresholds are deactivated. To select high-threshold channels for deactivation, subjects’ threshold profiles were processed to enhance the peaks and troughs, and then an exclusion or inclusion criterion based on the mean and standard deviation was used. Low-threshold channels were selected manually and matched in number and apex-to-base distribution. Nine ears in eight adult CI listeners with Advanced Bionics HiRes90k devices were tested with six experimental programs. Two, all-channel programs, (a 14-channel partial tripolar (pTP and (b 14-channel monopolar (MP, and four variable-channel programs, derived from these two base programs, (c pTP with high- and (d low-threshold channels deactivated, and (e MP with high- and (f low-threshold channels deactivated, were created. Across subjects, performance was similar with pTP and MP programs. However, poorer performing subjects (scoring  2. These same subjects showed slightly more benefit with the reduced channel MP programs (5 and 6. Subjective ratings were consistent with performance. These finding suggest that reducing channel interaction may benefit poorer performing CI listeners.

Effective information channels for reducing costs of environmentally- friendly technologies: evidence from residential PV markets

International Nuclear Information System (INIS)

Rai, Varun; Robinson, Scott A

2013-01-01

Realizing the environmental benefits of solar photovoltaics (PV) will require reducing costs associated with perception, informational gaps and technological uncertainties. To identify opportunities to decrease costs associated with residential PV adoption, in this letter we use multivariate regression models to analyze a unique, household-level dataset of PV adopters in Texas (USA) to systematically quantify the effect of different information channels on aspiring PV adopters’ decision-making. We find that the length of the decision period depends on the business model, such as whether the system was bought or leased, and on special opportunities to learn, such as the influence of other PV owners in the neighborhood. This influence accrues passively through merely witnessing PV systems in the neighborhood, increasing confidence and motivation, as well as actively through peer-to-peer communications. Using these insights we propose a new framework to provide public information on PV that could drastically reduce barriers to PV adoption, thereby accelerating its market penetration and environmental benefits. This framework could also serve as a model for other distributed generation technologies. (letter)

Effective information channels for reducing costs of environmentally- friendly technologies: evidence from residential PV markets

Science.gov (United States)

Rai, Varun; Robinson, Scott A.

2013-03-01

Realizing the environmental benefits of solar photovoltaics (PV) will require reducing costs associated with perception, informational gaps and technological uncertainties. To identify opportunities to decrease costs associated with residential PV adoption, in this letter we use multivariate regression models to analyze a unique, household-level dataset of PV adopters in Texas (USA) to systematically quantify the effect of different information channels on aspiring PV adopters’ decision-making. We find that the length of the decision period depends on the business model, such as whether the system was bought or leased, and on special opportunities to learn, such as the influence of other PV owners in the neighborhood. This influence accrues passively through merely witnessing PV systems in the neighborhood, increasing confidence and motivation, as well as actively through peer-to-peer communications. Using these insights we propose a new framework to provide public information on PV that could drastically reduce barriers to PV adoption, thereby accelerating its market penetration and environmental benefits. This framework could also serve as a model for other distributed generation technologies.

Field Test Results of Using a Nacelle-Mounted Lidar for Improving Wind Energy Capture by Reducing Yaw Misalignment (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Fleming, P.; Scholbrock, A.; Wright, A.

2014-11-01

Presented at the Nordic Wind Power Conference on November 5, 2014. This presentation describes field-test campaigns performed at the National Wind Technology Center in which lidar technology was used to improve the yaw alignment of the Controls Advanced Research Turbine (CART) 2 and CART3 wind turbines. The campaigns demonstrated that whether by learning a correction function to the nacelle vane, or by controlling yaw directly with the lidar signal, a significant improvement in power capture was demonstrated.

The Office of Industrial Technologies technical reports

Energy Technology Data Exchange (ETDEWEB)

1992-01-01

The US Department of Energy's Office of Industrial Technologies (OIT) conducts R D activities which focus on the objectives of improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial energy conservation. The Office also conducts programs to reduce waste generation, increase recycling efforts, and improve the use of wastes as process feedstocks. An active program of technology transfer and education supports these activities and encourages adoption of new technologies. To accomplish these objectives OIT cooperates with the private sector to identify its technological needs and to share R D efforts. R D is conducted to the point that a new technology is shown to work and that it can be transferred to the private sector end-users. This bibliography contains information on all scientific and technical reports sponsored by the DOE Industrial Energy Conservation Program during the years 1988--1990.

Fiscal 1996 international research cooperation project. Feasibility study of finding out the seeds of international joint research (technology for effective use of saturated hydrocarbon, technology for reducing excess of aromatic hydrocarbon, high-grade treatment technology of petroleum coke); 1996 nendo kokusai kenkyu kyoryoku jigyo. Kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa (howa tanka suiso no yuko riyo gijutsu, hokozoku tanka suiso no yojo taisaku gijutsu, sekiyu cokes no kodo shori gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This project is aimed at internationally cooperating in the R and D of industrial technology and improving industrial technology of Japan. For it, the following three technologies were investigated: (1) technology for effective use of saturated hydrocarbon, (2) technology for reducing excess of aromatic hydrocarbon, (3) high-grade treatment technology of petroleum coke. In (1), surveys were conducted of technologies of effective use of natural gas and effective use of C4 saturated hydrocarbon. Surveyed were a method for producing synthesis gas from natural gas, a technology to liquefy natural gas into fuel following the synthesis gas production process, a technology to liquefy natural gas into fuel without the synthesis gas production process, and the trend of effective use of C4 saturated hydrocarbon. In (2), surveys were made of process to reduce production of aromatic hydrocarbon as much as possible, process to effectively separate aromatic hydrocarbon, and process to convert excess aromatic hydrocarbon into polymer, etc. In (3), surveys were conducted on petroleum coke and pitch in terms of production methods, the supply/demand situation, property characteristics, usability to new fields, etc. 170 refs., 114 figs., 65 tabs.

Improving Logistics Processes in Industry Using Web Technologies

Directory of Open Access Journals (Sweden)

Jánošík Ján

2016-12-01

Full Text Available The aim of this paper is to propose the concept of a system that takes advantage of web technologies and integrates them into the management process and management of internal stocks which may relate to external applications and creates the conditions to transform a Computerized Control of Warehouse Stock (CCWS in the company. The importance of implementing CCWS is in the elimination of the claims caused by the human factor, as well as to allow the processing of information for analytical purposes and their subsequent use to improve internal processes. Using CCWS in the company would also facilitate better use of the potential tools Business Intelligence and Data Mining.

Exercise training reduces the frequency of menopausal hot flushes by improving thermoregulatory control.

Science.gov (United States)

Bailey, Tom G; Cable, N Timothy; Aziz, Nabil; Dobson, Rebecca; Sprung, Victoria S; Low, David A; Jones, Helen

2016-07-01

Postmenopausal hot flushes occur due to a reduction in estrogen production causing thermoregulatory and vascular dysfunction. Exercise training enhances thermoregulatory control of sweating, skin and brain blood flow. We aimed to determine if improving thermoregulatory control and vascular function with exercise training alleviated hot flushes. Twenty-one symptomatic women completed a 7-day hot flush questionnaire and underwent brachial artery flow-mediated dilation and a cardiorespiratory fitness test. Sweat rate and skin blood flow temperature thresholds and sensitivities, and middle cerebral artery velocity (MCAv) were measured during passive heating. Women performed 16 weeks of supervised exercise training or control, and measurements were repeated. There was a greater improvement in cardiorespiratory fitness (4.45 mL/kg/min [95% CI: 1.87, 8.16]; P = 0.04) and reduced hot flush frequency (48 hot flushes/wk [39, 56]; P core temperature (0.14°C [0.01, 0.27]; P = 0.03) and increased basal MCAv (2.8 cm/s [1.0, 5.2]; P = 0.04) compared with control. Sweat rate and skin blood flow thresholds occurred approximately 0.19°C and 0.17°C earlier, alongside improved sweating sensitivity with exercise. MCAv decreased during heating (P training that improves cardiorespiratory fitness reduces self-reported hot flushes. Improvements are likely mediated through greater thermoregulatory control in response to increases in core temperature and enhanced vascular function in the cutaneous and cerebral circulations.

Hyponatremia improvement is associated with a reduced risk of mortality: evidence from a meta-analysis.

Directory of Open Access Journals (Sweden)

Giovanni Corona

Full Text Available Hyponatremia is the most common electrolyte disorder and it is associated with increased morbidity and mortality. However, there is no clear demonstration that the improvement of serum sodium concentration ([Na(+] counteracts the increased risk of mortality associated with hyponatremia. Thus, we performed a meta-analysis that included the published studies that addressed the effect of hyponatremia improvement on mortality.A Medline, Embase and Cochrane search was performed to retrieve all English-language studies of human subjects published up to June 30th 2014, using the following words: "hyponatremia", "hyponatraemia", "mortality", "morbidity" and "sodium". Fifteen studies satisfied inclusion criteria encompassing a total of 13,816 patients. The identification of relevant abstracts, the selection of studies and the subsequent data extraction were performed independently by two of the authors, and conflicts resolved by a third investigator. Across all fifteen studies, any improvement of hyponatremia was associated with a reduced risk of overall mortality (OR=0.57[0.40-0.81]. The association was even stronger when only those studies (n=8 reporting a threshold for serum [Na(+] improvement to >130 mmol/L were considered (OR=0.51[0.31-0.86]. The reduced mortality rate persisted at follow-up (OR=0.55[0.36-0.84] at 12 months. Meta-regression analyses showed that the reduced mortality associated with hyponatremia improvement was more evident in older subjects and in those with lower serum [Na(+] at enrollment.This meta-analysis documents for the first time that improvement in serum [Na(+] in hyponatremic patients is associated with a reduction of overall mortality.

Improving the Learning Process in the Latest Prefabricated School Buildings

Science.gov (United States)

Pons, Oriol; Oliva, Josep-Manuel; Maas, Sandra-Ruth

2010-01-01

Since 2000 hundreds of school centers have been constructed in Catalonia using industrialized technologies. These centers are modern, useful, educational edifices built using advantageous prefabricated technologies that improve the building process and reduce the environmental impact of the building. This article analyses whether these…

Evolution of Technology for Continuous Renal Replacement Therapy: Forty Years of Improvement.

Science.gov (United States)

Ronco, Claudio

2018-01-01

Continuous arteriovenous hemofiltration (CAVH) was proposed in 1977 as an alternative treatment for acute renal failure in patients in whom peritoneal dialysis or hemodialysis was clinically or technically precluded. In the mid-1980s, this technique was extended to infants and children. CAVH presented important advantages in the areas of hemodynamic stability, control of circulating volume, and nutritional support. However, there were serious shortcomings such as the need for arterial cannulation and limited solute clearance. These problems were solved by the introduction of continuous arteriovenous hemodiafiltration and continuous arteriovenous hemodialysis, where uremic control could be achieved by increasing countercurrent dialysate flow rates to 1.5 or 2 L/h as necessary, or by venovenous techniques utilizing a double-lumen central venous catheter for vascular access. Thus, continuous venovenous hemofiltration replaced CAVH because of its improved performance and safety. From the initial adoptive technology, specific machines have been designed to permit safe and reliable performance of the therapy. These new machines have progressively undergone a series of technological steps that have resulted in the evolution of highly sophisticated equipment utilized today. A significant number of advances have taken place since the time continuous renal replacement therapy was initiated. In particular, there have been successful experiments with high-volume hemofiltration and high-permeability hemofiltration. The additional and combined use of sorbent has also been tested successfully. Progress has been made in the technology as well as the understanding of the pathophysiology of acute kidney injury. Today, new biomaterials and new devices are available and new frontiers are on the horizon. Although improvements have been made, a lot remains to be done. Critical care nephrology is expected to further evolve in the near future, especially in the area of information and

Assistive Technologies for Improving Communication of Hearing Impairment in the Higher Education in Panama

Directory of Open Access Journals (Sweden)

Lineth Alain

2016-12-01

Full Text Available The ability to communicate, specifically the gift of hearing, is a necessity often taken for granted. A lack of sense of hearing affects the intellectual and emotional development of the human being who suffers from it. It prevents the fluid exchange of knowledge, thoughts and ideas that allow personal growth and development. This article emerges due to an interest in providing assistive technologies that can be considered to improve communication among hearing impaired and normal hearing listeners in the class-room of a higher education level in the Republic of Panama. Information has been compiled from various primary and secondary sources highlighting the communication problem facing this group of disabled people. Information about the situation of hearing impairment, laws, organizations, the reality with the higher education system, and finally, we will talk about Information and Communication Technologies (TICs that will work as technology support in order to improve communication in the classroom in higher education among normal-hearing and deaf people.

Reducing Diagnostic Errors through Effective Communication: Harnessing the Power of Information Technology

Science.gov (United States)

Naik, Aanand Dinkar; Rao, Raghuram; Petersen, Laura Ann

2008-01-01

Diagnostic errors are poorly understood despite being a frequent cause of medical errors. Recent efforts have aimed to advance the "basic science" of diagnostic error prevention by tracing errors to their most basic origins. Although a refined theory of diagnostic error prevention will take years to formulate, we focus on communication breakdown, a major contributor to diagnostic errors and an increasingly recognized preventable factor in medical mishaps. We describe a comprehensive framework that integrates the potential sources of communication breakdowns within the diagnostic process and identifies vulnerable steps in the diagnostic process where various types of communication breakdowns can precipitate error. We then discuss potential information technology-based interventions that may have efficacy in preventing one or more forms of these breakdowns. These possible intervention strategies include using new technologies to enhance communication between health providers and health systems, improve patient involvement, and facilitate management of information in the medical record. PMID:18373151

Geospatial Technologies to Improve Urban Energy Efficiency

Directory of Open Access Journals (Sweden)

Bharanidharan Hemachandran

2011-07-01

Full Text Available The HEAT (Home Energy Assessment Technologies pilot project is a FREE Geoweb mapping service, designed to empower the urban energy efficiency movement by allowing residents to visualize the amount and location of waste heat leaving their homes and communities as easily as clicking on their house in Google Maps. HEAT incorporates Geospatial solutions for residential waste heat monitoring using Geographic Object-Based Image Analysis (GEOBIA and Canadian built Thermal Airborne Broadband Imager technology (TABI-320 to provide users with timely, in-depth, easy to use, location-specific waste-heat information; as well as opportunities to save their money and reduce their green-house-gas emissions. We first report on the HEAT Phase I pilot project which evaluates 368 residences in the Brentwood community of Calgary, Alberta, Canada, and describe the development and implementation of interactive waste heat maps, energy use models, a Hot Spot tool able to view the 6+ hottest locations on each home and a new HEAT Score for inter-city waste heat comparisons. We then describe current challenges, lessons learned and new solutions as we begin Phase II and scale from 368 to 300,000+ homes with the newly developed TABI-1800. Specifically, we introduce a new object-based mosaicing strategy, an adaptation of Emissivity Modulation to correct for emissivity differences, a new Thermal Urban Road Normalization (TURN technique to correct for scene-wide microclimatic variation. We also describe a new Carbon Score and opportunities to update city cadastral errors with automatically defined thermal house objects.