WorldWideScience

Sample records for improve wireless products

  1. The Best Wireless Products

    National Research Council Canada - National Science Library

    DRUCKENMILLER, JR., GARY

    2000-01-01

    ... players and their offerings. Ericsson R380: Ericsson, whose stock soared more than 3,000% in less than a year, takes the cake with what will be the most advanced wireless product ever to hit the open market. The Ericsson R380 is a combination phone and PDA. It has wireless Web access, e-mail send and receive capability, and voice recognition. Due out ...

  2. Improved BLAST for wireless communications

    Institute of Scientific and Technical Information of China (English)

    Li Yongzhao; Liao Guisheng; Wang Feng

    2006-01-01

    Bell layered space-time architecture (BLAST) is a multi-antenna communication structure with high spectrum efficiency, and it has found wide applications in LANs and WLANs. However, its performance is much poorer than those of other space-time coding approaches. In order to improve its performance, an improved BLAST based on RAKE receiving is investigated. The new system introduces orthogonal spreading sequences (OSS) into the transmitter while retains the basic structure of BLAST. The proposed receiver suppresses interferences from other antennas by the orthogonality contained in the received signals, and extracts information from each receiving antenna by using RAKE receiving principle to construct efficient statistic decision. Simulation results show that the improved system performs well over both frequency-flat and frequency-selective fading channels.

  3. An Improved Wireless Sensor Network Routing Algorithm

    Institute of Scientific and Technical Information of China (English)

    Shengmei Luo; Xue Li; Yiai Jin; Zhixin Sun

    2015-01-01

    High performance with low power consumption is an essential factor in wireless sensor networks (WSN). In order to address the issue on the lifetime and the consumption of nodes in WSNs, an improved ad hoc on⁃demand distance vector rout⁃ing (IAODV) algorithm is proposed based on AODV and LAR protocols. This algorithm is a modified on⁃demand routing al⁃gorithm that limits data forwarding in the searching domain, and then chooses the route on basis of hop count and power consumption. The simulation results show that the algorithm can effectively reduce power consumption as well as prolong the network lifetime.

  4. Signal Processing for Improved Wireless Receiver Performance

    DEFF Research Database (Denmark)

    Christensen, Lars P.B.

    2007-01-01

    This thesis is concerned with signal processing for improving the performance of wireless communication receivers for well-established cellular networks such as the GSM/EDGE and WCDMA/HSPA systems. The goal of doing so, is to improve the end-user experience and/or provide a higher system capacity...... in connection with parameter estimation. Next, a realistic framework for interference whitening is presented, allowing flexibility in the selection of whether interference is accounted for via a discrete or a Gaussian distribution. The approximate method of sphere detection and decoding is outlined and various...... suggestions for improvements are presented. In addition, methods for using generalized BP to perform approximate joint detection and decoding in systems with convolutional codes are outlined. One such method is a natural generalization of the traditional Turbo principle and a generalized Turbo principle can...

  5. Reduction of Carbon Footprint and Energy Efficiency Improvement in Aluminum Production by Use of Novel Wireless Instrumentation Integrated with Mathematical Modeling

    Energy Technology Data Exchange (ETDEWEB)

    James W. Evans

    2012-04-11

    The work addressed the greenhouse gas emission and electrical energy consumption of the aluminum industry. The objective was to provide a means for reducing both through the application of wireless instrumentation, coupled to mathematical modeling. Worldwide the aluminum industry consumes more electrical energy than all activities in many major countries (e.g. the UK) and emits more greenhouse gasses (e.g. than France). Most of these excesses are in the 'primary production' of aluminum; that is the conversion of aluminum oxide to metal in large electrolytic cells operating at hundreds of thousands of amps. An industry-specific GHG emission has been the focus of the work. The electrolytic cells periodically, but at irregular intervals, experience an upset condition known as an 'anode effect'. During such anode effects the cells emit fluorinated hydrocarbons (PFCs, which have a high global warming potential) at a rate far greater than in normal operation. Therefore curbing anode effects will reduce GHG emissions. Prior work had indicated that the distribution of electrical current within the cell experiences significant shifts in the minutes before an anode effect. The thrust of the present work was to develop technology that could detect and report this early warning of an anode effect so that the control computer could minimize GHG emissions. A system was developed to achieve this goal and, in collaboration with Alcoa, was tested on two cells at an Alcoa plant in Malaga, Washington. The project has also pointed to the possibility of additional improvements that could result from the work. Notable among these is an improvement in efficiency that could result in an increase in cell output at little extra operating cost. Prospects for commercialization have emerged in the form of purchase orders for further installations. The work has demonstrated that a system for monitoring the current of individual anodes in an aluminum cell is practical

  6. Improved timing recovery in wireless mobile receivers

    CSIR Research Space (South Africa)

    Olwal, TO

    2007-06-01

    Full Text Available This paper presents a decentralised cross layer dynamic power control (DDPC) scheme for Wireless Mesh Networks (WMNs). A general cross-layer occupation measure (COM) based on transmission scheduling probability (TSP) and power control policy (PCP...

  7. Improved production of human type II procollagen in the yeast Pichia pastoris in shake flasks by a wireless-controlled fed-batch system

    Directory of Open Access Journals (Sweden)

    Myllyharju Johanna

    2008-03-01

    Full Text Available Abstract Background Here we describe a new technical solution for optimization of Pichia pastoris shake flask cultures with the example of production of stable human type II collagen. Production of recombinant proteins in P. pastoris is usually performed by controlling gene expression with the strong AOX1 promoter, which is induced by addition of methanol. Optimization of processes using the AOX1 promoter in P. pastoris is generally done in bioreactors by fed-batch fermentation with a controlled continuous addition of methanol for avoiding methanol toxification and carbon/energy starvation. The development of feeding protocols and the study of AOX1-controlled recombinant protein production have been largely made in shake flasks, although shake flasks have very limited possibilities for measurement and control. Results By applying on-line pO2 monitoring we demonstrate that the widely used pulse feeding of methanol results in long phases of methanol exhaustion and consequently low expression of AOX1 controlled genes. Furthermore, we provide a solution to apply the fed-batch strategy in shake flasks. The presented solution applies a wireless feeding unit which can be flexibly positioned and allows the use of computer-controlled feeding profiles. By using the human collagen II as an example we show that a quasi-continuous feeding profile, being the simplest way of a fed-batch fermentation, results in a higher production level of human collagen II. Moreover, the product has a higher proteolytic stability compared to control cultures due to the increased expression of human collagen prolyl 4-hydroxylase as monitored by mRNA and protein levels. Conclusion The recommended standard protocol for methanol addition in shake flasks using pulse feeding is non-optimal and leads to repeated long phases of methanol starvation. The problem can be solved by applying the fed-batch technology. The presented wireless feeding unit, together with an on-line monitoring

  8. Improvement Of Aodv Routing Protocol Based On Wireless Networks

    OpenAIRE

    Baria Vanrajkumar Dineshkumar

    2012-01-01

    For wireless networks has no support infrastructure and shows a highly dynamic feature, routing becomes a key problem to be solved. Data packets are transmitted on a path that had least hops in AODV protocol. It couldn't consider the path stability. When the node of wireless networks moved quickly and the path had short lifetime, the path recovery and routing again is caused. It is a lot of network resource. For network performance, AODV_V that improvement of AODV protocol in the paper. Opnet...

  9. Feature Extraction and Spatial Interpolation for Improved Wireless Location Sensing

    Directory of Open Access Journals (Sweden)

    Chris Rizos

    2008-04-01

    Full Text Available This paper proposes a new methodology to improve location-sensing accuracy in wireless network environments eliminating the effects of non-line-of-sight errors. After collecting bulks of anonymous location measurements from a wireless network, the preparation stage of the proposed methodology begins. Investigating the collected location measurements in terms of signal features and geometric features, feature locations are identified. After the identification of feature locations, the non-line-of-sight error correction maps are generated. During the real-time location sensing stage, each user can request localization with a set of location measurements. With respected to the reported measurements, the pre-computed correction maps are applied. As a result, localization accuracy improves by eliminating the non-line-of-sight errors. A simulation result, assuming a typical dense urban environment, demonstrates the benefits of the proposed location sensing methodology.

  10. An Accurate Link Correlation Estimator for Improving Wireless Protocol Performance

    Directory of Open Access Journals (Sweden)

    Zhiwei Zhao

    2015-02-01

    Full Text Available Wireless link correlation has shown significant impact on the performance of various sensor network protocols. Many works have been devoted to exploiting link correlation for protocol improvements. However, the effectiveness of these designs heavily relies on the accuracy of link correlation measurement. In this paper, we investigate state-of-the-art link correlation measurement and analyze the limitations of existing works. We then propose a novel lightweight and accurate link correlation estimation (LACE approach based on the reasoning of link correlation formation. LACE combines both long-term and short-term link behaviors for link correlation estimation. We implement LACE as a stand-alone interface in TinyOS and incorporate it into both routing and flooding protocols. Simulation and testbed results show that LACE: (1 achieves more accurate and lightweight link correlation measurements than the state-of-the-art work; and (2 greatly improves the performance of protocols exploiting link correlation.

  11. An Accurate Link Correlation Estimator for Improving Wireless Protocol Performance

    Science.gov (United States)

    Zhao, Zhiwei; Xu, Xianghua; Dong, Wei; Bu, Jiajun

    2015-01-01

    Wireless link correlation has shown significant impact on the performance of various sensor network protocols. Many works have been devoted to exploiting link correlation for protocol improvements. However, the effectiveness of these designs heavily relies on the accuracy of link correlation measurement. In this paper, we investigate state-of-the-art link correlation measurement and analyze the limitations of existing works. We then propose a novel lightweight and accurate link correlation estimation (LACE) approach based on the reasoning of link correlation formation. LACE combines both long-term and short-term link behaviors for link correlation estimation. We implement LACE as a stand-alone interface in TinyOS and incorporate it into both routing and flooding protocols. Simulation and testbed results show that LACE: (1) achieves more accurate and lightweight link correlation measurements than the state-of-the-art work; and (2) greatly improves the performance of protocols exploiting link correlation. PMID:25686314

  12. Improved Feistel-based ciphers for wireless sensor network security

    Institute of Scientific and Technical Information of China (English)

    Tamara PAZYNYUK; Jian-zhong LI; George S.OREKU

    2008-01-01

    Wireless sensor networks (WSNs) are exposed to a variety of attacks.The quality and complexity of attacks are rising day by day.The proposed work aims at showing how the complexity of modem attacks is growing accordingly,leading to a similar rise in methods of resistance.Limitations in computational and battery power in sensor nodes are constraints on the diversity of security mechanisms.We must apply only suitable mechanisms to WSN where our approach was motivated by the application of an improved Feistel scheme.The modified accelerated-cipher design uses data-dependent permutations,and can be used for fast hardware,firmware,software and WSN encryption systems.The approach presented showed that ciphers using this approach are less likely to suffer intrusion of differential cryptanalysis than currently used popular WSN ciphers like DES,Camellia and so on

  13. Improved Capacity Scaling in Wireless Networks With Infrastructure

    CERN Document Server

    Shin, Won-Yong; Devroye, Natasha; Vu, Mai H; Chung, Sae-Young; Lee, Yong H; Tarokh, Vahid

    2008-01-01

    This paper analyzes the impact and benefits of infrastructure support in improving the throughput scaling in networks of $n$ randomly located wireless nodes. The infrastructure uses multi-antenna base stations (BSs), in which the number of BSs and the number of antennas at each BS can scale at arbitrary rates relative to $n$. Two schemes are introduced in this study: a BS-based single-hop routing protocol with multiple-access uplink and broadcast downlink and a BS-based multi-hop routing protocol. Then, the throughput scaling laws of each are analyzed here. These schemes are compared against two conventional schemes without BSs: the multi-hop (MH) transmission and hierarchical cooperation (HC) schemes. It is shown that the BS-based routing schemes do not improve the throughput scaling in dense networks. In contrast, the proposed BS-based routing schemes can, under realistic network conditions, improve the throughput scaling significantly in extended networks. The gain comes from the following advantages of th...

  14. Throughput Improvement In Wireless Mesh Networks By Integrating With Optical Network

    Directory of Open Access Journals (Sweden)

    Chakrapani gadde

    2012-06-01

    Full Text Available In the last decade wireless mesh networks (WMNs have emerged as a key technology for next generation wireless networking. Because of their advantages over other wireless networks, WMNs are undergoing rapid progress and inspiring numerous applications. One such application is to provide peer-to-peer communication for all the users who are distributed over some area. Since the users are connected in awireless multi-hop passion complete ubiquity is provided. But as the number of users accessing the network is increasing there could be a chance of experiencing more interference by each user due to the communication link of every other user. So in a wireless mesh network as the load increases the throughput of network is going to be decreased due to wireless interference by other users. To sustain this problem we are going to integrate the WMN with passive optical network (PON. The resulting hybrid network (Optical-wireless network could reduce the wireless hops of each user, so that we can reduce the total wireless interference experienced by each user resulting in improved network throughput. This paper aims to study the network throughput gain in Optical-wireless network subject to peer-to-peer communications.

  15. Intelligent tires for improved tire safety using wireless strain measurement

    Science.gov (United States)

    Matsuzaki, Ryosuke; Todoroki, Akira

    2008-03-01

    From a traffic safety point-of-view, there is an urgent need for intelligent tires as a warning system for road conditions, for optimized braking control on poor road surfaces and as a tire fault detection system. Intelligent tires, equipped with sensors for monitoring applied strain, are effective in improving reliability and control systems such as anti-lock braking systems (ABSs). In previous studies, we developed a direct tire deformation or strain measurement system with sufficiently low stiffness and high elongation for practical use, and a wireless communication system between tires and vehicle that operates without a battery. The present study investigates the application of strain data for an optimized braking control and road condition warning system. The relationships between strain sensor outputs and tire mechanical parameters, including braking torque, effective radius and contact patch length, are calculated using finite element analysis. Finally, we suggested the possibility of optimized braking control and road condition warning systems. Optimized braking control can be achieved by keeping the slip ratio constant. The road condition warning would be actuated if the recorded friction coefficient at a certain slip ratio is lower than a 'safe' reference value.

  16. Improving Energy Efficient Clustering Method for Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Md. Imran Hossain

    2013-08-01

    Full Text Available Wireless sensor networks have recently emerged as important computing platform. These sensors are power-limited and have limited computing resources. Therefore the sensor energy has to be managed wisely in order to maximize the lifetime of the network. Simply speaking, LEACH requires the knowledge of energy for every node in the network topology used. In LEACHs threshold which selects the cluster head is fixed so this protocol does not consider network topology environments. We proposed IELP algorithm, which selects cluster heads using different thresholds. New cluster head selection probability consists of the initial energy and the number of neighbor nodes. On rotation basis, a head-set member receives data from the neighboring nodes and transmits the aggregated results to the distant base station. For a given number of data collecting sensor nodes, the number of control and management nodes can be systematically adjusted to reduce the energy consumption, which increases the network life.The simulation results show that the performance of IELP has an improvement of 39% over LEACH and 20% over SEP in the area of 100m*100m for m=0.1, α =2 where advanced nodes (m and the additional energy factor between advanced and normal nodes (α.

  17. Data center performance improvement using optical wireless links

    Science.gov (United States)

    Arnon, Shlomi

    2017-01-01

    Data centers collect and process information with a capacity that has been increasing from year to year at an almost exponential pace, while many datacenter applications are provided at no cost. This faces datacenter operators with the challenges of meeting exponentially increasing demands for network bandwidth without unreasonable increases in operation and infrastructure cost. In order to meet the requirements of moderate increase in operation and infrastructure cost new technologies are desired. Optical wireless technology could a) reduce the power consumption, b) increase the flexibility and scalability and c) reduce the network overload.. The OWC link could be deployed on top of the existing cable/fiber network layer, such that live migration could be done easily and dynamically and network topology is flexible and adapts quickly to changes in traffic, heat distribution, power consumption and characteristics of the applications. In addition, OWC could provide an easy way to maintains and scale up data centers which would reduce total cost of ownership and increase the return on investment. In this talk we will review the main OWC technologies, algorithms concepts and configurations which improve the performance of next generation data centers.

  18. Improving SCTP Performance by Jitter-Based Congestion Control over Wired-Wireless Networks

    Directory of Open Access Journals (Sweden)

    Chen Jyh-Ming

    2011-01-01

    Full Text Available With the advances of wireless communication technologies, wireless networks gradually become the most adopted communication networks in the new generation Internet. Computing devices and mobile devices may be equipped with multiple wired and/or wireless network interfaces. Stream Control Transmission Protocol (SCTP has been proposed for reliable data transport and its multihoming feature makes use of network interfaces effectively to improve performance and reliability. However, like TCP, SCTP suffers unnecessary performance degradation over wired-wireless heterogeneous networks. The main reason is that the original congestion control scheme of SCTP cannot differentiate loss events so that SCTP reduces the congestion window inappropriately. In order to solve this problem and improve performance, we propose a jitter-based congestion control scheme with end-to-end semantics over wired-wireless networks. Besides, we solved ineffective jitter ratio problem which may cause original jitter-based congestion control scheme to misjudge congestion loss as wireless loss. Available bandwidth estimation scheme will be integrated into our congestion control mechanism to make the bottleneck more stabilized. Simulation experiments reveal that our scheme (JSCTP gives prominence to improve performance effectively over wired-wireless networks.

  19. Improving Performance in Dense Wireless Spaces by Controlling Bulk Traffic

    Directory of Open Access Journals (Sweden)

    Marat Zhanikeev

    2017-01-01

    Full Text Available The growing number of wireless devices nowadays often results in congestion of wireless channels. In research, this topic is referred to as networking in dense wireless spaces. The literature on the topic shows that the biggest problem is the high number of concurrent sessions to a wireless access point. The obvious solution is to reduce the number of concurrent sessions. This paper proposes a simple method called Bulk-n-Pick which minimizes the number of prolonged concurrent sessions by separating bulk from sync traffic. Aiming at educational applications, under the proposed design, web applications would distribute the main bulk of content once at the beginning of a class and then rely on small messages for real time sync traffic during the class. For realistic performance analysis, this paper first performs real-life experiments with various counts of wireless devices, bulk sizes, and levels of sync intensity. Based on the experiments, this paper shows that the proposed Bulk-n-Pick method outperforms the traditional design even when only two concurrent bulk sessions are allowed. The experiment shows that up to 10 concurrent bulk sessions are feasible in practice. Based on these results, a method for online performance optimization is proposed and validated in a trace-based emulation.

  20. An Improved Performance Frequency Estimation Algorithm for Passive Wireless SAW Resonant Sensors

    Directory of Open Access Journals (Sweden)

    Boquan Liu

    2014-11-01

    Full Text Available Passive wireless surface acoustic wave (SAW resonant sensors are suitable for applications in harsh environments. The traditional SAW resonant sensor system requires, however, Fourier transformation (FT which has a resolution restriction and decreases the accuracy. In order to improve the accuracy and resolution of the measurement, the singular value decomposition (SVD-based frequency estimation algorithm is applied for wireless SAW resonant sensor responses, which is a combination of a single tone undamped and damped sinusoid signal with the same frequency. Compared with the FT algorithm, the accuracy and the resolution of the method used in the self-developed wireless SAW resonant sensor system are validated.

  1. An improved performance frequency estimation algorithm for passive wireless SAW resonant sensors.

    Science.gov (United States)

    Liu, Boquan; Zhang, Chenrui; Ji, Xiaojun; Chen, Jing; Han, Tao

    2014-11-25

    Passive wireless surface acoustic wave (SAW) resonant sensors are suitable for applications in harsh environments. The traditional SAW resonant sensor system requires, however, Fourier transformation (FT) which has a resolution restriction and decreases the accuracy. In order to improve the accuracy and resolution of the measurement, the singular value decomposition (SVD)-based frequency estimation algorithm is applied for wireless SAW resonant sensor responses, which is a combination of a single tone undamped and damped sinusoid signal with the same frequency. Compared with the FT algorithm, the accuracy and the resolution of the method used in the self-developed wireless SAW resonant sensor system are validated.

  2. Improving designer productivity

    Science.gov (United States)

    Hill, Gary C.

    1992-01-01

    Designer and design team productivity improves with skill, experience, and the tools available. The design process involves numerous trials and errors, analyses, refinements, and addition of details. Computerized tools have greatly speeded the analysis, and now new theories and methods, emerging under the label Artificial Intelligence (AI), are being used to automate skill and experience. These tools improve designer productivity by capturing experience, emulating recognized skillful designers, and making the essence of complex programs easier to grasp. This paper outlines the aircraft design process in today's technology and business climate, presenting some of the challenges ahead and some of the promising AI methods for meeting those challenges.

  3. Significant performance improvement obtained in a wireless mesh network using a beamswitching antenna

    CSIR Research Space (South Africa)

    Lysko, AA

    2012-09-01

    Full Text Available , beamswitching, parasitic array I. INTRODUCTION The wireless communications experience significant growth, which can be expected to continue for at least one- two decades due to steadily growing demand and introduction of new technologies bandwidth hungry... to improve the throughput in a wireless network by an order of magnitude. . VI. REFERENCES [1] C. Balanis, Antenna Theory: Analysis and Design. 3rd Ed, Willey, 2005, 1136p. [2] C. Balanis, Introduction to Smart Antennas (Synthesis Lectures...

  4. IDUC: An Improved Distributed Unequal Clustering Protocol for Wireless Sensor Networks

    OpenAIRE

    Chuanqing Chen; Li Feng; Xin Gu; Jiguo Yu; Dongxiao Yu; Baogui Huang

    2015-01-01

    Due to the imbalanced energy consumption among nodes in wireless sensor networks, some nodes die prematurely, which decreases the network lifetime. To solve this problem, existing clustering protocols usually construct unequal clusters by exploiting uneven competition radius. Taking their imperfection on designing the uneven competition radius and intercluster communication into consideration, this paper proposes an improved distributed unequal clustering protocol (IDUC) for wireless sensor n...

  5. Ferrite Loaded Coils for Improved Wireless Power Transfer Efficiency

    Science.gov (United States)

    2015-09-01

    Department of Defense or the U.S. Government. IRB Protocol number ____N/A____. 12a. DISTRIBUTION / AVAILABILITY STATEMENT Approved for public...Series on Innovative Wireless Power Transmission: Technologies, Systems, and Applications, Kyoto , Japan, 2011, pp. 73–76. [15] Z. Ullah, A. Shahid, and

  6. Cryptanalysis and Improvement of the Robust User Authentication Scheme for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Yung-Cheng Lee

    2012-10-01

    Full Text Available Wireless sensor networks are widely used in industrial process control, human health care, environmental control, vehicular tracking and battlefield surveillance, etc. A wireless sensor network consists of lots of sensor nodes and a gateway node. The sensor node usually communicates with the gateway node and users over an ad hoc wireless network. However, due to the open environments, the wireless sensor networks are vulnerable to variety of security threats. Thus, it is a critical issue to adopt a suitable authentication mechanism for wireless sensor networks to enhance security. In 2009, Vaidya et al. proposed a robust user authentication schemes for wireless sensor networks. In this article, we will show that their scheme is vulnerable to the guessing attack and the impersonation attack. Since it needs a secure channel for communications in password changing phase, their scheme is also inconvenient and expensive for users to update passwords. We also propose an improved scheme to remedy the flaws. The improved scheme withstands the replay attack and off-line guessing attack, and the users can freely update their passwords via public channels.

  7. Wireless networks. Standard ZigBee (on the example of products of Atmel Corp.

    Directory of Open Access Journals (Sweden)

    O. M. Lyashuk

    2011-03-01

    Full Text Available The situation and prospects of wireless radio receivers and radio transmitters which use standard ZigBee is examined in this work. The specification of ZigBee is developed on the base of international standard of IEEE 802.15.4 for creation inexpensive wireless networks for transmission small amount of information with low-power consumption. Main feature of ZigBee is support of not only simple topologies of wireless connection but also difficult wireless networks at relatively low energy consumption. Products of company Atmel have the best support of ZigBee technology. ZigBee is used in the industrial monitoring systems, in a medical equipment, can be integrated in the systems of production process automation.

  8. IMPROVING THE PERFORMANCE AND REDUCING BIT ERROR RATE ON WIRELESS DEEP FADING ENVIRONMENT RECEIVERS

    Directory of Open Access Journals (Sweden)

    K. Jayanthi

    2014-01-01

    Full Text Available One of the major challenges in wireless communication system is increasing complexity and reducing performance in detecting the received digital information in indoor and outdoor Environments. Consequently to overcome this problem we analyze the delay performance of a multiuser with perfect channel state information transmitting data on deep fading environment. In this proposed system, the Wireless Deep Fading Environment (WDFE creation for causing a Nakagami Multipath Fading Channel of fading figure ‘m’ is used to rectify the delay performance over the existing Rayleigh fading channel. In this WDFE receivers received coherent, synchronized, secured and improved signal strength of information using a Multiuser Coherent Joint Diversity (MCJD with Multi Carrier-Code Division Multiple Access (MC-CDMA. The MCJD in ‘M’ branch of antennas are used to reduce the Bit Error Rate (BER and MC-CDMA method is used to improve the performance. Therefore, in this proposed system we accompany with MCJD and MC-CDMA is very good transceiver for next generation wireless system of an existing 3G wireless system. Overall, this experimental results show improved performance in different multiuser wireless systems under different multipath fading conditions.

  9. An Efficient Hybrid Power Control Algorithm for Capacity Improvement of CDMA-based Fixed Wireless Applications

    CERN Document Server

    Zeeshan, Muhammad; Malik, Muhammad Yasir

    2011-01-01

    In Fixed Wireless Applications (FWA), the Code Division Multiple Access (CDMA) is the most promising candidate for wideband data access. The reason is the soft limit on the number of active mobile devices. Many Fixed Wireless Applications impose an upper bound on the BER performance which restricts the increase in number of mobile users. The number of active mobile users or Capacity is further reduced in Multipath Fading Environment (MFE). This paper presents an effective method of improving the capacity of CDMA based Fixed Wireless Networks by using a hybrid power control algorithm. The proposed scheme improves the capacity two times as compared to the conventional CDMA based networks. Simulation results have been presented to demonstrate the effectiveness of the proposed scheme.

  10. Target Localization Based on Improved DV-Hop Algorithm in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Xiaolong Huang

    2014-01-01

    Full Text Available The node localization technology of wireless sensor networks is essential and prerequisite to many applications, which it is one of the important support technologies for wireless sensor networks. The node localization is to get the position information of blind node by using location information of few known nodes and some special mechanisms. This paper primarily investigates a kind of target localization technology based on the improved DV-Hop algorithm in wireless sensor networks. We firstly compute the distances measured by RSSI and the mean value of one-hop distance. Then we can use the differences between the mean and the actual distance to get the error correction between the total distance and average one-hop distance. Replace trilateration with hybrid localization of MIN-MAX and weighted least square method. Finally, simulation experiment results show the improved algorithm can effectively carry out the network localization, thus has a certain of practical value

  11. Optimal Cooperative Relaying Schemes for Improving Wireless Physical Layer Security

    CERN Document Server

    Li, Jiangyuan; Weber, Steven

    2010-01-01

    We consider a cooperative wireless network in the presence of one of more eavesdroppers, and exploit node cooperation for achieving physical (PHY) layer based security. Two different cooperation schemes are considered. In the first scheme, cooperating nodes retransmit a weighted version of the source signal in a decode-and-forward (DF) fashion. In the second scheme, while the source is transmitting, cooperating nodes transmit weighted noise to confound the eavesdropper (cooperative jamming (CJ)). We investigate two objectives, i.e., maximization of achievable secrecy rate subject to a total power constraint, and minimization of total power transmit power under a secrecy rate constraint. For the first design objective with a single eavesdropper we obtain expressions for optimal weights under the DF protocol in closed form, and give an algorithm that converges to the optimal solution for the CJ scheme; while for multiple eavesdroppers we give an algorithm for the solution using the DF protocol that is guarantee...

  12. Coverage Improvement for Wireless Sensor Networks using Grid Quorum based Node Mobility

    DEFF Research Database (Denmark)

    Mathur, Prateek; Nielsen, Rasmus Hjorth; Prasad, Neeli R.

    2012-01-01

    Coverage of wireless sensor networks (WSNs) is an important quality of service (QoS) metric and often the desired coverage is not attainable at the initial deployment, but node mobility can be used to improve the coverage by relocating sensor nodes. Unconstrained node mobility is considered infea...

  13. A Novel Improved DSR Algorithm Based on Cross-Layer Mechanism in Wireless Mesh Network

    Directory of Open Access Journals (Sweden)

    Yue Lu

    2010-07-01

    Full Text Available Routing in Wireless Networks is challenging because of the unpredictable behavior of the medium and the random variations in channel condition. All of these factors lead to poor performance in multi-hop wireless mesh networks specially with the conventional routing. In order to exploit all the advantages that the wireless medium offers, new routing metrics must be explored. These metrics should come from across-layer approach in order to make the routing layer aware of the local issues of the underling layers.In this paper we investigate a new cross-layer routing metric that takes into account available bandwidth as well as the number of retransmissions, thus aiming to minimize end-to-end delay. The experimental results show that the proposed cross-layer metric improves the performance of routing in terms of end-to-end delay and network throughput by selecting paths with high available bandwidth while also avoiding areas of MAC congestion.

  14. Improving the physical layer security of wireless communication networks using spread spectrum coding and artificial noise approach

    CSIR Research Space (South Africa)

    Adedeji, K

    2016-09-01

    Full Text Available in progress on a proposed hybrid spread spectrum coding and artificial noise approach to improving the physical layer security of wireless communication channels. The authors are optimistic that, the proposed method will further improve the physical layer...

  15. A Novel AP for Improving the Performance of Wireless LANs Supporting VoIP

    Directory of Open Access Journals (Sweden)

    Thavisak Manodham

    2006-08-01

    Full Text Available Recently, wireless LANs based on the IEEE 802.11 standard have become popular and widely used, and Voice-over-IP (VoIP is one of the most promising technologies to be used in mobile devices over wireless networks. Up-to-date, new technologies have improved, providing a high data rate to support various kinds of realtime applications. However, besides the need for higher data rates, seamless handoff is another important issue to be addressed in order to continue supporting real-time services across wireless LANs. In this paper we introduce a novel Access Point (AP with two transceivers to improve network efficiency in terms of supporting seamless handoff and balancing the traffic load in a wireless network. In our proposed scheme, the novel AP will use the second transceiver to scan and find neighboring STAs in the transmission range and later send the result to its associate AP, which in turn compares and analyzes whether or not the STA should perform a handoff. The initial results from our simulations show the novel AP module is more effective than the conventional one in terms of providing a handoff process with low latency and support traffic load sharing with neighbor APs.

  16. IEATH: Improved Energy Aware and Two Hop Multipath Routing Protocol in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    S. Saqaeeyan

    2012-06-01

    Full Text Available Wireless sensor networks in terms of energy sources are limited. Furthermore due to this type of network infrastructure wireless communications and channel errors not possible to reach the correct packet to the destination exists; hence the proposing algorithms to improve the quality of service in these networks and sending packets are very important. In this paper we proposed a reliable and energy aware packet delivery mechanism to ensure quality of service in wireless sensor networks. In our proposed algorithm to ensure that a packet of information sent to the destination, the multi-path Forwarding method is used; So that several copies of an information packet via separate routes are sent to the destination, also routing decisions in this way occurs by considering the remaining energy in the neighborhood of nodes that are located in two hop of sender node. Simulation results show that the rate of release of data packets reduced in this way and thus the reliability of packet is increased, also the energy efficiency of sensor nodes effectively improved. Therefore this algorithm increase overall lifetime in wireless sensor networks.

  17. BEST PRACTICES IN NEW PRODUCT DEVELOPMENT: THE ZYRAY WIRELESS CASE STUDY

    Directory of Open Access Journals (Sweden)

    P. Koekemoer

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Successful high-tech start-up companies are rare. This case study investigates the New Product Development (NPD process of Zyray Wireless, a very successful startup 3G technology company that originated in South Africa but relocated to California in the USA. The research looked into the differences between generally accepted NPD best practices and those implemented by this start-up company. Zyray Wireless scored above the industry average in the following categories: customer involvement, project selection, product strategy, technological leadership, and product goal. The best practices for metrics, human resource development, documentation, and change control implemented by Zyray Wireless scored at or below the industry average. The best practice results showed that this very successful start-up company focused more on strategy and engineering and less on process control than average.

    AFRIKAANSE OPSOMMING: Suksesvolle nuwe hoë-tegnologie maatskappye is skaars. Hierdie gevallestudie het die Nuwe Produk Ontwikkelingproses (NPO ondersoek van Zyray Wireless, ʼn baie suksesvolle nuwe maatskappy wat in Suid-Afrika ontstaan het maar na Kalifornië in die VSA verskuif is. Die navorsing het na die verskille gekyk tussen algemeen aanvaarde NPO beste praktyke en dié wat deur hierdie maatskappy geïmplementeer is. Zyray Wireless het bo die industriegemiddelde gepresteer in die volgende kategorieë: kliëntbetrokkenheid, projekkeuse, produkstrategie, tegnologiese leierskap, en produkdoelwitte. Die beste praktyke vir maatstawwe, menslike hulpbronontwikkeling, dokumentasie, en veranderingsbeheer wat deur Zyray Wireless geïmplementeer is, het onder die industriegemiddeldes gepresteer. Die beste praktykresultate het getoon dat hierdie baie suksesvolle nuwe maatskappy meer gefokus het op strategie en ingenieurswese en minder op prosesbeheer as die gemiddelde.

  18. Improving pension product design

    DEFF Research Database (Denmark)

    Konicz, Agnieszka Karolina; Mulvey, John M.

    2013-01-01

    Pension products characterized by linking an individual's savings directly to market returns represent the most popular, growing pension domain globally. These products are widely sold in contribution-defined pension schemes, labor market pensions, and individual schemes. However, available...... products are designed with a tendency to assume greater risk the longer it is until retirement, but are not adjusted to individual preferences and circumstances. This paper develops an optimal asset allocation strategy for a defined contribution plan by adjusting to individual needs, such that the expected...... of an optimal pension product design, we present the operations research methods, which have potential to stimulate new thinking and add to actuarial practice....

  19. Traffic Agents for Improving QoS in Mixed Infrastructure and Ad Hoc Modes Wireless LAN

    Directory of Open Access Journals (Sweden)

    Yuan Hai-Feng

    2006-01-01

    Full Text Available As an important complement to infrastructured wireless networks, mobile ad hoc networks (MANET are more flexible in providing wireless access services, but more difficult in meeting different quality of service (QoS requirements for mobile customers. Both infrastructure and ad hoc network structures are supported in wireless local area networks (WLAN, which can offer high data-rate wireless multimedia services to the mobile stations (MSs in a limited geographical area. For those out-of-coverage MSs, how to effectively connect them to the access point (AP and provide QoS support is a challenging issue. By mixing the infrastructure and the ad hoc modes in WLAN, we propose in this paper a new coverage improvement scheme that can identify suitable idle MSs in good service zones as traffic agents (TAs to relay traffic from those out-of-coverage MSs to the AP. The service coverage area of WLAN is then expanded. The QoS requirements (e.g., bandwidth of those MSs are considered in the selection process of corresponding TAs. Mathematical analysis, verified by computer simulations, shows that the proposed TA scheme can effectively reduce blocking probability when traffic load is light.

  20. Improved wound care product

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention pertains to use of sodium diacetate (NaHAc 2) as an antimicrobial agent against bacteria growing in biofilms. The aspects of the invention include a wound care product comprising sodium diacetate, a kit comprising a wound care product,and a methodof treating an infected wound....

  1. PRODUCT PROMOTION IMPROVEMENT

    OpenAIRE

    Diakonidze, M.; Pyankov, V.

    2013-01-01

    The article is dedicated to the problems faced by companies during a new competitive insurance product market launch. In the article the new products working out risk levels are set. The particularities of auto dealers and insurance companies cooperation is studied on the example of the “crash protection” service.

  2. Research on Application of Improved Smart Data Aggregation Algorithm in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Pu Wang

    2014-07-01

    Full Text Available Aiming at the existing problems such as high shard collision rate and so on of Smart algorithm in the data aggregation of the wireless sensor network, this paper puts forward the improved Smart data aggregation algorithm. The algorithm in this paper adds optimization factors from five aspects, and the addition of the various optimization factors makes the accuracy be improved, the communication traffic of the scheme also be effectively reduced at the same time, which indirectly prolongs the survival time of the network. The experimental results show that the improved algorithm of this paper can improve the accuracy and security of the data aggregation.

  3. Performance Improvement of DCF Supporting Multi-Rate in IEEE 802.11b Wireless LAN

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    This paper proposes a new channel access algorithm based on channel occupancy time (COT) fairness to guarantee fairness and improve the aggregate throughput of 802.11b multi-rate WLANs. In the algorithm, the COT is used as fairness index to analyze the fairness of WLANs instead of the channel access probability (CAP) used in the distributed coordination function (DCF).The standard COT is given by access point (AP) and broadcasted to all wireless stations. The AP and wireless stations in the WLAN can achieve COT-based fairness by adjusting their packet length,sending the multiple back-to-back packets at one time, or giving up an opportunity to access the channel. Analysis and simulations show that our algorithm can provide COT-fairness. Compared with the CAP-based algorithm, the proposed algorithm leads to improvements in aggregate throughput of IEEE 802.11b multi-rate WLANs.

  4. Performance analysis of an improved dynamic power management model in wireless sensor node

    Directory of Open Access Journals (Sweden)

    Anuradha Pughat

    2017-02-01

    Full Text Available The energy consumption in the wireless sensor networks is a very critical issue which attracts immediate attention for the sake of the growing demand of the billion dollar market in future. The Dynamic Power Management (DPM technique is a way of controlling and saving the energy usage in a sensor node. Previously, researchers have proposed lifetime improving stochastic models for wireless sensor networks and limited work has been done focusing on the wireless sensor node. This paper proposes an analyser based Semi-Markov model for DPM in the event-driven sensor node. The power consumption comparison with previously proposed models without this analyser shows the analyser significant contributes to lifetime improvement. The improved model is more power efficient, presents how the DPM model observes the input event arrival and power states of the sensor node components, and then dynamically manages the power consumption of the overall system. Further, to observe the effect of event arrival, missed events, waiting time, processor utilization on the power consumption and lifetime, the proposed DPM system with the single server queuing model is developed.

  5. Improving pension product design

    DEFF Research Database (Denmark)

    Konicz, Agnieszka Karolina; Mulvey, John M.

    to individual needs. We argue that the asset allocation, the payout prole and the insured sum should not only depend on the plan member's age (or time left to retirement), nor only on her risk preferences, but should capture personal and economical characteristics. Among other factors, we include current wealth......, expected lifetime salary progression, mandatory and voluntary pension contributions, expected state retirement pension, choice of assets, subjective lifetime expectancy and bequest motive. Specically, the asset allocation strategy, the payout prole and the level of insured sum dening the new product...

  6. Improvement of AODV Routing Protocol with QoS Support in Wireless Mesh Networks

    Science.gov (United States)

    Liu, Ling; Zhu, Lei; Lin, Long; Wu, Qihui

    The Wireless Mesh Network (WMN) is a newly developed wireless network which supports broadband and high speed multimedia service, so the Quality-of-Service (QoS) must be guaranteed by the network. In this paper, a new QoS-aware routing protocol based on AODV named QAODV (QoS- AODV) is proposed. Under the premise of the delay and available bandwidth meeting the QoS demands, the protocol defines a new route metric with the hop count and load rate so as to select the best route according to it. Simulation results show that, compared with AODV, the performance of QAODV is better on both network throughput and end-to-end delay with small increase of control overhead. As a whole, the protocol improves the QoS guarantee capability in the WMN.

  7. TO IMPROVE THE TCP PERFORMANCE USING CROSS LAYER IN WIRED CUM WIRELESS NETWORK.

    Directory of Open Access Journals (Sweden)

    KANNADASAN. R

    2012-04-01

    Full Text Available Recent development mostly based on the high speed internet access of large amount of data at any time over wireless network. Packets loss can also occur due to link failure in wired cum wireless environment. To reduce the loss rate, packet delay, retransmission time, Wi-Max is proposed with cross layer design. In this paper, to improve the performance TCP in the WI-MAX flow its estimating bandwidth of the each packet, reduce the RTT in retransmission which gives more data transfer rate and also reduce the packet drop ratio. Some layers are merging their functions and provide traffic flow with ARQ in Wi-Max. Each node provides information through Access Point which can uplink and downlink feedback about packet as an ACK or NACK. Retransmission mechanism is used for NACK to resend the lost frame through the access point.

  8. Proposing an Optimum Multicasting Routing Algorithm Using Ant Colony for Improving QoS in Wireless Mesh Network

    Directory of Open Access Journals (Sweden)

    Mohsen Shakibafakhr

    2013-11-01

    Full Text Available Wireless mesh networks (WMNs are new emerging networks which are anticipated to resolve many limitations of ad-hoc networks, sensor networks and wireless local area networks and improve their performance. But still there are many unresolved research challenge in this area. In this paper we have proposed source-specific multicast protocol for wireless mesh network, which has many application in, multimedia, radio and TV multicasting and distance learning. We have used core-based approach to construct minimum cost tree (MCT among member nodes and optimized this tree for multiple metrics by applying ant colony optimization metaphor.

  9. Improved Wireless Security through Physical Layer Protocol Manipulation and Radio Frequency Fingerprinting

    Science.gov (United States)

    2014-09-18

    FINGERPRINTING I. Introduction Modern wireless communications networks have revolutionized the ways in which information is shared. Inexpensive low-rate wireless ... Wireless Intrusion Detection and Device Fingerprinting through PHY Manipulation 2.1 Introduction Properly securing low-rate LR-WPANs is challenging due... wireless interference or are completely uninterpretable by the receiver. Influence of wireless noise is mitigated by operating on IEEE 802.15.4 channel

  10. Improving efficiency in pig production

    African Journals Online (AJOL)

    important. The production of lean meat is shown to be improved significantly by adopting ... is interested in the biology of pig production, then biological efficiency and its .... scientific basis, I have calculated the economic effects of a number of ...

  11. Generic Algorithm with Varying Block Sizes to Improve the Capacity of a Wireless Communications Networks

    Directory of Open Access Journals (Sweden)

    Mahmoud Abdellaoui

    2009-01-01

    Full Text Available Problem statement: Channel capacity can be an essential parameter for wireless communication to improve the link quality. Until now, the channel capacity has been evaluated by utilizing Shannon capacity theory, but it presented many limitations and restrictions. The objectives of this study were to: (i Expose, quantify, present and to give a clear and concise exposition of the mathematical principles of the proposed generic algorithm and (ii Calculate and simulate the SNR, the BER and the channel capacity for wireless underwater transceiver and compare with the literature references. Approach: Contrary to the existing theory (Shannon capacity theory that required and needed of the exact channel state distribution and particularly the precisely estimation of cut-off threshold profile, so, the bad estimation allowed suspending transmission even for good channel conditions, the proposed generic algorithm was used to determine the channel capacity performance with varying block size input packet information (N was varied from 50-200 as a function of the optimum transmit power (from 3.5-7.0 w. This approach did not require the exact channel state distribution; but the channel was well modeled and the cut-off threshold profile had to be numerically solved. The iteration results of this algorithm were utilized to calculate and simulate the SNR, the BER and the channel capacity for wireless underwater transceiver performance. Results: The consultation performance of channel capacity wireless underwater communication, obtained with present approach, were significantly better in any transmission conditions (no suspending transmission because the proposed algorithm was well suited to obtain results about channel capacity. In the other hand, the amount of transmitted data per resource depended on the channel conditions was performed. Blocking is no longer critical if data traffic without or with sensitivity has to be served. Data rate results were allowed

  12. Wireless Sensor Network for Improving the Energy Efficiency of Data Centers

    Energy Technology Data Exchange (ETDEWEB)

    Mahdavi, Rod [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Tschudi, William [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-03-01

    Data centers occupy less than 2% of the federally owned portfolio under the jurisdiction, custody or control of the U.S. General Services Administration (GSA), but represent nearly 5% of the agency’s overall energy budget. Assuming that energy use in GSA’s data centers tracks with industry averages, GSA can anticipate that data center energy use will grow at an annual rate of 15%, a doubling of energy use every five years.1 In fact, energy is the single largest operating expense for most data centers. Improving the energy performance of data center systems supports progress toward meeting federally mandated greenhouse gas emission-­reduction goals, while reducing operating and energy costs and allowing for greater flexibility in future expansion by eliminating the need to provide additional power and cooling. Studies sponsored by the U.S. Department of Energy (DOE) and the U.S. Environmental Protection Agency (EPA) have shown that energy use can be reduced by 25% through implementation of best practices and commercially available technologies. The present study evaluated the effectiveness of a strategy to cost- effectively improve the efficiency of data center cooling, which is the single largest non-­IT load. The technology that was evaluated consists of a network of wireless sensors—including branch circuit power monitors, temperature sensors, humidity sensors, and pressure sensors, along with an integrated software product to help analyze the collected data. The technology itself does not save energy; however, its information collection and analysis features enable users to understand operating conditions and identify problem areas. In addition, data obtained by this technology can be input into assessment tools that can identify additional best practice measures. Energy savings result from the implementation of the best practices. The study was conducted to validate the premise that providing data center operators with detailed, real- time measurement

  13. Wireless Mobile Technology to Improve Workflow and Feasibility of MR-Guided Percutaneous Interventions

    Science.gov (United States)

    Rube, Martin A.; Holbrook, Andrew B.; Cox, Benjamin F.; Buciuc, Razvan; Melzer, Andreas

    2015-01-01

    Purpose A wireless interactive display and control device combined with a platform-independent web-based User Interface (UI) was developed to improve the workflow for interventional Magnetic Resonance Imaging (iMRI). Methods The iMRI-UI enables image acquisition of up to three independent slices using various pulse sequences with different contrast weighting. Pulse sequence, scan geometry and related parameters can be changed on the fly via the iMRI-UI using a tablet computer for improved lesion detection and interventional device targeting. The iMRI-UI was validated for core biopsies with a liver phantom (n=40) and Thiel soft-embalmed human cadavers (n=24) in a clinical 1.5T MRI scanner. Results The iMRI-UI components and setup were tested and found conditionally MRI-safe to use according to current ASTM standards. Despite minor temporary touchscreen interference at a close distance to the bore (<20 cm), no other issues regarding quality or imaging artefacts were observed. The 3D root-mean-square distance error was 2.8±1.0 (phantom) / 2.9±0.8 mm (cadaver) and overall procedure times ranged between 12–22 (phantom) / 20–55 minutes (cadaver). Conclusions The wireless iMRI-UI control setup enabled fast and accurate interventional biopsy needle placements along complex trajectories and improved the workflow for percutaneous interventions under MRI guidance in a preclinical trial. PMID:25179151

  14. Environmental improvement through product development

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Bey, Niki

    new business opportunities, where sustainable development and value creation are integrated early in the design of new products and services. There is a great opportunity for businesses to create a new and positive agenda, where the focus is on all the good that companies can do for the environment...... and aid the establishment of such a new agenda. We place our focus on how products and services can be designed so not to harm humans, the environment and nature. With this Guide to environmental improvement through product development, we take the first step in this collaboration. The Guide gives...... inspiration and a stepwise approach to integrating positive environmental effects into companies’ design and product development processes. The Guide is intended primarily for product developers who have the task of building environmental thinking into the product development process. However environmental...

  15. Shipbuilding pipeline production quality improvement

    Directory of Open Access Journals (Sweden)

    T. Buksa

    2010-06-01

    Full Text Available Purpose: The pipeline production is one of major processes in shipbuilding industry. Quality improvement and risk assessment in this process can yield significant savings, both in terms of internal quality costs as well as in terms of customer satisfactions.Design/methodology/approach: Shipbuilding pipeline production quality improvement has been carried out by application of FMEA (Failure Mode and Effect Analysis method. For the successful implementation of FMEA method it is necessary to identify process failure modes or possibility of the appearance of non-compliance, as well as their possible causes. For qualitative analysis of key input variables of the process, in the paper is used Ishikawa diagram and p-chart.Findings: It is shown that proposed approach to risk assessment in shipbuilding pipeline production is applicable to real casa scenario. The analysis has identified the points in the process with the highest probability of occurrence of nonconformities, or the highest risk for error.Research limitations/implications: As the experimenting has been conducted in shipyard, within production process, research schedule must have been set in accordance with production pace. Also, due to character of production process the data collecting was adopted to the production plan in that particular moment.Practical implications: Dealing with causes of potential nonconformities in the process can significantly contribute to the reliability and robustness of the process. Corrective actions that have been taken based on results of analysis significantly contributed to the level of quality in the pipeline production process.Originality/value: The pepper is dealing with a well known method applied in different production environment that are mostly conservative in production approach. It was shown that successful application of proposed approach can yield benefits especially in improved quality of produced pipelines within shipbuilding industry.

  16. An improved localization algorithm based on genetic algorithm in wireless sensor networks.

    Science.gov (United States)

    Peng, Bo; Li, Lei

    2015-04-01

    Wireless sensor network (WSN) are widely used in many applications. A WSN is a wireless decentralized structure network comprised of nodes, which autonomously set up a network. The node localization that is to be aware of position of the node in the network is an essential part of many sensor network operations and applications. The existing localization algorithms can be classified into two categories: range-based and range-free. The range-based localization algorithm has requirements on hardware, thus is expensive to be implemented in practice. The range-free localization algorithm reduces the hardware cost. Because of the hardware limitations of WSN devices, solutions in range-free localization are being pursued as a cost-effective alternative to more expensive range-based approaches. However, these techniques usually have higher localization error compared to the range-based algorithms. DV-Hop is a typical range-free localization algorithm utilizing hop-distance estimation. In this paper, we propose an improved DV-Hop algorithm based on genetic algorithm. Simulation results show that our proposed algorithm improves the localization accuracy compared with previous algorithms.

  17. Improved Selectivity From a Wavelength Addressable Device for Wireless Stimulation of Neural Tissue

    Directory of Open Access Journals (Sweden)

    Elif Ç. Seymour

    2014-02-01

    Full Text Available Electrical neural stimulation with micro electrodes is a promising technique for restoring lost functions in the central nervous system as a result of injury or disease. One of the problems related to current neural stimulators is the tissue response due to the connecting wires and the presence of a rigid electrode inside soft neural tissue. We have developed a novel, optically activated, microscale photovoltaic neurostimulator based on a custom layered compound semiconductor heterostructure that is both wireless and has a comparatively small volume. Optical activation provides a wireless means of energy transfer to the neurostimulator, eliminating wires and the associated complications. This neurostimulator was shown to evoke action potentials and a functional motor response in the rat spinal cord. In this work, we extend our design to include wavelength selectivity and thus allowing independent activation of devices. As a proof of concept, we fabricated two different microscale devices with different spectral responsivities in the near-infrared region. We assessed the improved addressability of individual devices via wavelength selectivity as compared to spatial selectivity alone through on-bench optical measurements of the devices in combination with an in vivo light intensity profile in the rat cortex obtained in a previous study. We show that wavelength selectivity improves the individual addressability of the floating stimulators, thus increasing the number of devices that can be implanted in close proximity to each other.

  18. Improving designer productivity. [artificial intelligence

    Science.gov (United States)

    Hill, Gary C.

    1992-01-01

    Designer and design team productivity improves with skill, experience, and the tools available. The design process involves numerous trials and errors, analyses, refinements, and addition of details. Computerized tools have greatly speeded the analysis, and now new theories and methods, emerging under the label Artificial Intelligence (AI), are being used to automate skill and experience. These tools improve designer productivity by capturing experience, emulating recognized skillful designers, and making the essence of complex programs easier to grasp. This paper outlines the aircraft design process in today's technology and business climate, presenting some of the challenges ahead and some of the promising AI methods for meeting these challenges.

  19. Improving designer productivity. [artificial intelligence

    Science.gov (United States)

    Hill, Gary C.

    1992-01-01

    Designer and design team productivity improves with skill, experience, and the tools available. The design process involves numerous trials and errors, analyses, refinements, and addition of details. Computerized tools have greatly speeded the analysis, and now new theories and methods, emerging under the label Artificial Intelligence (AI), are being used to automate skill and experience. These tools improve designer productivity by capturing experience, emulating recognized skillful designers, and making the essence of complex programs easier to grasp. This paper outlines the aircraft design process in today's technology and business climate, presenting some of the challenges ahead and some of the promising AI methods for meeting these challenges.

  20. Improving efficiency in meat production.

    Science.gov (United States)

    Brameld, John M; Parr, Tim

    2016-08-01

    Selective breeding and improved nutritional management over the past 20-30 years has resulted in dramatic improvements in growth efficiency for pigs and poultry, particularly lean tissue growth. However, this has been achieved using high-quality feed ingredients, such as wheat and soya that are also used for human consumption and more recently biofuels production. Ruminants on the other hand are less efficient, but are normally fed poorer quality ingredients that cannot be digested by human subjects, such as grass or silage. The challenges therefore are to: (i) maintain the current efficiency of growth of pigs and poultry, but using more ingredients not needed to feed the increasing human population or for the production of biofuels; (ii) improve the efficiency of growth in ruminants; (iii) at the same time produce animal products (meat, milk and eggs) of equal or improved quality. This review will describe the use of: (a) enzyme additives for animal feeds, to improve feed digestibility; (b) known growth promoting agents, such as growth hormone, β-agonists and anabolic steroids, currently banned in the European Union but used in other parts of the world; (c) recent transcriptomic studies into molecular mechanisms for improved growth efficiency via low residual feed intake. In doing so, the use of genetic manipulation in animals will also be discussed.

  1. Lifetime Improvement of Wireless Sensor Networks by Collaborative Beamforming and Cooperative Transmission

    CERN Document Server

    Han, Zhu

    2007-01-01

    Extending network lifetime of battery-operated devices is a key design issue that allows uninterrupted information exchange among distributive nodes in wireless sensor networks. Collaborative beamforming (CB) and cooperative transmission (CT) have recently emerged as new communication techniques that enable and leverage effective resource sharing among collaborative/cooperative nodes. In this paper, we seek to maximize the lifetime of sensor networks by using the new idea that closely located nodes can use CB/CT to reduce the load or even avoid packet forwarding requests to nodes that have critical battery life. First, we study the effectiveness of CB/CT to improve the signal strength at a faraway destination using energy in nearby nodes. Then, a 2D disk case is analyzed to assess the resulting performance improvement. For general networks, if information-generation rates are fixed, the new routing problem is formulated as a linear programming problem; otherwise, the cost for routing is dynamically adjusted a...

  2. Design and Evaluation of 10-Gbps Inter-satellite Optical Wireless Communication Link for Improved Performance

    Science.gov (United States)

    Gupta, Amit; Nagpal, Shaina

    2017-05-01

    Inter-satellite optical wireless communication (IsOWC) systems can be chosen over existing microwave satellite systems for deploying in space in the future due to their high bandwidth, small size, light weight, low power and low cost. However, the IsOWC system suffers from various attenuations due to weather conditions, turbulence or scintillations which limit its performance and decreases its availability. So, in order to improve the performance, IsOWC system using directly modulated laser source is proposed in this work. The system is designed and evaluated to be suitable for high data rate transmissions up to 10 Gbps. The performance of the system is investigated in order to reduce the cost and complexity of link and improving the quality of information signal. Further the proposed IsOWC system is analysed using BER analyser, power meter and oscilloscope Visualizer.

  3. Self-Adaptive Strategy Based on Fuzzy Control Systems for Improving Performance in Wireless Sensors Networks

    Directory of Open Access Journals (Sweden)

    Vicente Hernández Díaz

    2015-09-01

    Full Text Available The solutions to cope with new challenges that societies have to face nowadays involve providing smarter daily systems. To achieve this, technology has to evolve and leverage physical systems automatic interactions, with less human intervention. Technological paradigms like Internet of Things (IoT and Cyber-Physical Systems (CPS are providing reference models, architectures, approaches and tools that are to support cross-domain solutions. Thus, CPS based solutions will be applied in different application domains like e-Health, Smart Grid, Smart Transportation and so on, to assure the expected response from a complex system that relies on the smooth interaction and cooperation of diverse networked physical systems. The Wireless Sensors Networks (WSN are a well-known wireless technology that are part of large CPS. The WSN aims at monitoring a physical system, object, (e.g., the environmental condition of a cargo container, and relaying data to the targeted processing element. The WSN communication reliability, as well as a restrained energy consumption, are expected features in a WSN. This paper shows the results obtained in a real WSN deployment, based on SunSPOT nodes, which carries out a fuzzy based control strategy to improve energy consumption while keeping communication reliability and computational resources usage among boundaries.

  4. Self-Adaptive Strategy Based on Fuzzy Control Systems for Improving Performance in Wireless Sensors Networks.

    Science.gov (United States)

    Hernández Díaz, Vicente; Martínez, José-Fernán; Lucas Martínez, Néstor; del Toro, Raúl M

    2015-09-18

    The solutions to cope with new challenges that societies have to face nowadays involve providing smarter daily systems. To achieve this, technology has to evolve and leverage physical systems automatic interactions, with less human intervention. Technological paradigms like Internet of Things (IoT) and Cyber-Physical Systems (CPS) are providing reference models, architectures, approaches and tools that are to support cross-domain solutions. Thus, CPS based solutions will be applied in different application domains like e-Health, Smart Grid, Smart Transportation and so on, to assure the expected response from a complex system that relies on the smooth interaction and cooperation of diverse networked physical systems. The Wireless Sensors Networks (WSN) are a well-known wireless technology that are part of large CPS. The WSN aims at monitoring a physical system, object, (e.g., the environmental condition of a cargo container), and relaying data to the targeted processing element. The WSN communication reliability, as well as a restrained energy consumption, are expected features in a WSN. This paper shows the results obtained in a real WSN deployment, based on SunSPOT nodes, which carries out a fuzzy based control strategy to improve energy consumption while keeping communication reliability and computational resources usage among boundaries.

  5. Improving Management Performance of P2PSIP for Mobile Sensing in Wireless Overlays

    Directory of Open Access Journals (Sweden)

    José María Pousada-Carballo

    2013-11-01

    Full Text Available Future wireless communications are heading towards an all-Internet Protocol (all-IP design, and will rely on the Session Initiation Protocol (SIP to manage services, such as voice over IP (VoIP. The centralized architecture of traditional SIP has numerous disadvantages for mobile ad hoc services that may be possibly overcome by advanced peer-to-peer (P2P technologies initially developed for the Internet. In the context of mobile sensing, P2PSIP protocols facilitate decentralized and fast communications with sensor-enabled terminals. Nevertheless, in order to make P2PSIP protocols feasible in mobile sensing networks, it is necessary to minimize overhead transmissions for signaling purposes, which reduces the battery lifetime. In this paper, we present a solution to improve the management of wireless overlay networks by defining an adaptive algorithm for the calculation of refresh time. The main advantage of the proposed algorithm is that it takes into account new parameters, such as the delay between nodes, and provides satisfactory performance and reliability levels at a much lower management overhead than previous approaches. The proposed solution can be applied to many structured P2P overlays or P2PSIP protocols. We evaluate it with Kademlia-based distributed hash tables (DHT and dSIP.

  6. Improving TCP Performance over Wireless Ad Hoc Networks with Busy Tone Assisted Scheme

    Directory of Open Access Journals (Sweden)

    Cai Lin

    2006-01-01

    Full Text Available It is well known that transmission control protocol (TCP performance degrades severely in IEEE 802.11-based wireless ad hoc networks. We first identify two critical issues leading to the TCP performance degradation: (1 unreliable broadcast, since broadcast frames are transmitted without the request-to-send and clear-to-send (RTS/CTS dialog and Data/ACK handshake, so they are vulnerable to the hidden terminal problem; and (2 false link failure which occurs when a node cannot successfully transmit data temporarily due to medium contention. We then propose a scheme to use a narrow-bandwidth, out-of-band busy tone channel to make reservation for broadcast and link error detection frames only. The proposed scheme is simple and power efficient, because only the sender needs to transmit two short messages in the busy tone channel before sending broadcast or link error detection frames in the data channel. Analytical results show that the proposed scheme can dramatically reduce the collision probability of broadcast and link error detection frames. Extensive simulations with different network topologies further demonstrate that the proposed scheme can improve TCP throughput by 23% to 150%, depending on user mobility, and effectively enhance both short-term and long-term fairness among coexisting TCP flows in multihop wireless ad hoc networks.

  7. ZigBee-based Wireless Neuro-Stimulator for Improving Stroke Recovery.

    Science.gov (United States)

    Kim, Gookhwa; Yun, Hyojeong; Ryu, Munho; Shin, Yongil; Kim, Hyoungihl; Yang, Yoonseok

    2010-12-01

    Stroke is a leading cause of adult disability and the second-leading cause of death in Korea. It is also the third-leading cause of death in the United States, leading to a serious demand for new interventions to improve the quality of life in stroke survivors. To this end, direct cortical stimulation using an epidural electrode has been reported with promising results in animal and human studies, showing the potential for enhancing the recovery in chronic stroke patients. For optimal results, doctors must be able to modify the stimulation pattern as frequently as needed over a period of time for a given patient. However, severe aftereffects caused by stroke limit patients' activities, making regular doctor visits for treatment difficult. This study aims to develop a prototype of a telemedicine system to enhance stroke recovery by using a ZigBeebased wireless neuro-stimulator. The ZigBee is a stable platform for many low-power wireless applications. To allow stroke patients to remotely obtain neuro-stimulation treatments from their doctors, we connected the ZigBee to the internet. The system also allows doctors to personalize treatment based on the history of the stimulation parameters. The system developed here can also be beneficial as a common platform for a wide range of brain diseases and clinical care for which electric stimulation is used.

  8. An improved unified network protocol framework for large-scale wireless sensor networks

    Science.gov (United States)

    Ding, Jin; Sivalingam, Krishna M.

    2004-08-01

    Rapid technological advances in wireless communication have made it possible for networking sensor devices. Given the low computation and battery power capacities of these sensor nodes, the key design factors of network protocols are self-configuring, energy-efficient, adaptive, and scalable. We presented the multi-hop infrastructure network architecture (MINA) for a wireless sensor network consisting of a few hundred sensors that communicate data to a base station (BS). We designed a Unified Network Protocol Framework for MINA that encompasses network organization, medium access control (MAC) and routing protocols. In this paper, we improve it by adaptively varying transmission range to maintain network connectivity. It is a derivative-free optimization algorithm. The BS periodically evaluates the objective function, chooses the appropriate transmission range and broadcasts it to the sensor nodes that then update the transmission range. The advantages are: (i) Avoids the disconnectivity; (ii) Maximizes the number of nodes that can be connected to the BS, (iii) Minimizes the energyxdelay metric and (iv) Avoids the "hot-spot" nodes in the network. The performance in terms of delay, throughput, energy consumption and network lifetimes, is studied in detail using discrete-event simulation compared with other protocol. The results show that it is energy efficient in a large scale network.

  9. Compressive Sensing Based Opportunistic Protocol for Throughput Improvement in Wireless Networks

    CERN Document Server

    Qaseem, Syed T

    2009-01-01

    A key feature in the design of any MAC protocol is the throughput it can provide. In wireless networks, the channel of a user is not fixed but varies randomly. Thus, in order to maximize the throughput of the MAC protocol at any given time, only users with large channel gains should be allowed to transmit. In this paper, compressive sensing based opportunistic protocol for throughput improvement in wireless networks is proposed. The protocol is based on the traditional protocol of R-ALOHA which allows users to compete for channel access before reserving the channel to the best user. We use compressive sensing to find the best user, and show that the proposed protocol requires less time for reservation and so it outperforms other schemes proposed in literature. This makes the protocol particularly suitable for enhancing R-ALOHA in fast fading environments. We consider both analog and digital versions of the protocol where the channel gains sent by the user are analog and digital, respectively.

  10. Congestion Prediction Modeling for Quality of Service Improvement in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Ga-Won Lee

    2014-04-01

    Full Text Available Information technology (IT is pushing ahead with drastic reforms of modern life for improvement of human welfare. Objects constitute “Information Networks” through smart, self-regulated information gathering that also recognizes and controls current information states in Wireless Sensor Networks (WSNs. Information observed from sensor networks in real-time is used to increase quality of life (QoL in various industries and daily life. One of the key challenges of the WSNs is how to achieve lossless data transmission. Although nowadays sensor nodes have enhanced capacities, it is hard to assure lossless and reliable end-to-end data transmission in WSNs due to the unstable wireless links and low hard ware resources to satisfy high quality of service (QoS requirements. We propose a node and path traffic prediction model to predict and minimize the congestion. This solution includes prediction of packet generation due to network congestion from both periodic and event data generation. Simulation using NS-2 and Matlab is used to demonstrate the effectiveness of the proposed solution.

  11. Congestion prediction modeling for quality of service improvement in wireless sensor networks.

    Science.gov (United States)

    Lee, Ga-Won; Lee, Sung-Young; Huh, Eui-Nam

    2014-04-30

    Information technology (IT) is pushing ahead with drastic reforms of modern life for improvement of human welfare. Objects constitute "Information Networks" through smart, self-regulated information gathering that also recognizes and controls current information states in Wireless Sensor Networks (WSNs). Information observed from sensor networks in real-time is used to increase quality of life (QoL) in various industries and daily life. One of the key challenges of the WSNs is how to achieve lossless data transmission. Although nowadays sensor nodes have enhanced capacities, it is hard to assure lossless and reliable end-to-end data transmission in WSNs due to the unstable wireless links and low hard ware resources to satisfy high quality of service (QoS) requirements. We propose a node and path traffic prediction model to predict and minimize the congestion. This solution includes prediction of packet generation due to network congestion from both periodic and event data generation. Simulation using NS-2 and Matlab is used to demonstrate the effectiveness of the proposed solution.

  12. Improving Management Performance of P2PSIP for Mobile Sensing in Wireless Overlays

    Science.gov (United States)

    Sendín-Raña, Pablo; González-Castaño, Francisco Javier; Gómez-Cuba, Felipe; Asorey-Cacheda, Rafael; Pousada-Carballo, José María

    2013-01-01

    Future wireless communications are heading towards an all-Internet Protocol (all-IP) design, and will rely on the Session Initiation Protocol (SIP) to manage services, such as voice over IP (VoIP). The centralized architecture of traditional SIP has numerous disadvantages for mobile ad hoc services that may be possibly overcome by advanced peer-to-peer (P2P) technologies initially developed for the Internet. In the context of mobile sensing, P2PSIP protocols facilitate decentralized and fast communications with sensor-enabled terminals. Nevertheless, in order to make P2PSIP protocols feasible in mobile sensing networks, it is necessary to minimize overhead transmissions for signaling purposes, which reduces the battery lifetime. In this paper, we present a solution to improve the management of wireless overlay networks by defining an adaptive algorithm for the calculation of refresh time. The main advantage of the proposed algorithm is that it takes into account new parameters, such as the delay between nodes, and provides satisfactory performance and reliability levels at a much lower management overhead than previous approaches. The proposed solution can be applied to many structured P2P overlays or P2PSIP protocols. We evaluate it with Kademlia-based distributed hash tables (DHT) and dSIP PMID:24217358

  13. E-BEB Algorithm to Improve Quality of Service on Wireless Ad-Hoc Networks

    Directory of Open Access Journals (Sweden)

    Mohammed Al-Hubaishi

    2012-04-01

    Full Text Available The Medium Access Control (MAC protocol is the main element which determines the system throughput in Wireless Local Area Networks (WLANs IEEE 802.11 standard. The MAC technique of the IEEE 802.11 protocol is called Distributed Coordination Function (DCF. In DCF, stations contend for the use of the channel in distributed manner via the use of the Carrier Sensing Multiple Access with Collision Avoidance (CSMA/CA protocol. In the CSMA/CA protocol, each station sets up a Backoff time according to a randomly selected interval from zero to the Contention Window (CW for an additional deferral time before transmitting. The random Binary Exponential Backoff (BEB algorithm is used to randomize moments at which stations try to access the wireless medium. However, in the random Backoff mechanism, packet collisions are not entirely eliminated, and the system throughput decreases when the number of stations is large, and there is no fairness between stations. The BEB algorithm has a number of disadvantages; one crucial disadvantage is the problem of fairness. In this paper, we analyze the behavior of the BEB algorithm used in IEEE 802.11 standard. We propose an Enhanced Binary Exponential Backoff (E-BEB algorithm to improve the fairness of the channel access for BEB algorithm. Our E-BEB algorithm adjusts the way of increase or decrease of the contention window CW based on the number of the frame which is sent successfully. We propose several configurations, and we use NS2 simulator to analyze the network's fairness of the channel access of the E-BEB algorithm. The simulation results show that compared with other algorithms like BEB or Improved BEB (IBEB, the E-BEB algorithm improves the fairness of the channel access and increases the network's throughput capacity; which is an valuable Quality of Service (QoS parameter.

  14. Energy Route Multi-Objective Optimization of Wireless Power Transfer Network: An Improved Cross-Entropy Method

    Directory of Open Access Journals (Sweden)

    Lijuan Xiang

    2017-06-01

    Full Text Available This paper identifies the Wireless Power Transfer Network (WPTN as an ideal model for long-distance Wireless Power Transfer (WPT in a certain region with multiple electrical equipment. The schematic circuit and design of each power node and the process of power transmission between the two power nodes are elaborated. The Improved Cross-Entropy (ICE method is proposed as an algorithm to solve for optimal energy route. Non-dominated sorting is introduced for optimization. A demonstration of the optimization result of a 30-nodes WPTN system based on the proposed algorithm proves ICE method to be efficacious and efficiency.

  15. Wireless sensor network-based improved NPW leakage detection algorithm for real-time application in pipelines

    CSIR Research Space (South Africa)

    Adedeji, K

    2016-09-01

    Full Text Available of pipelines transporting this resource needs to be reduced. This paper briefly elaborates on work in progress employing wireless sensor networks (WSNs) to an improved negative pressure wave method for real-time leakage monitoring of a water pipeline network....

  16. Improving Spectral Capacity and Wireless Network Coverage by Cognitive Radio Technology and Relay Nodes in Cellular Systems

    DEFF Research Database (Denmark)

    Frederiksen, Flemming Bjerge

    2008-01-01

    Methods to enhance the use of the frequency spectrum by automatical spectrum sensing plus spectrum sharing in a cognitive radio technology context have been presented and discussed in this paper. Ideas to improve the wireless transmission by orthogonal OFDM-based communication and to increase...

  17. Broadcasting with Controlled Redundancy and Improved Localization in Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Tarun Dubey; Om Prakash Sahu

    2013-01-01

    Wireless sensor networks (WSNs) consist of sensor nodes that broadcast a message within a network. Efficient broadcasting is a key requirement in sensor networks and has been a focal point of research over the last few years. There are many challenging tasks in the network, including redundancy control and sensor node localization that mainly depend on broadcasting. In this paper, we propose a broadcasting algorithm to control redundancy and improve localization (BACRIL) in WSNs. The proposed algorithm incorporates the benefits of the gossip protocol for optimizing message broadcasting within the network. Simulation results show a controlled level of redundancy, which is up to 57.6% if the number of sensor nodes deployed in a 500 m×500 m area are increased from 50 to 500.

  18. Performance Improvement of Distributed Coordination Function in IEEE 802.11 Wireless LAN

    Institute of Scientific and Technical Information of China (English)

    SHU Yantai; DONG Linfang; WANG Guanghong; ZHANG Liang

    2006-01-01

    This paper proposes a modification to distributed coordination function (DCF) to improve the channel utilization in IEEE 802.11 wireless local area networks (WLANs). In the modified DCF, when a station has contended for the channel, it may transmit multiple data frames continuously to the same destination, which is called transmission burst(TB). When the maximum number of data packets transmitted continuously in a TB is set to be 2, the performance is expected to be the best. The theoretical analysis and simulation results show that compared with the standard DCF, the modified DCF can increase the throughput and decrease the delay of the WLAN, and the modification does not introduce any additional control overhead.

  19. Throughput-efficient wireless system and blind detection via improved particle filtering

    Institute of Scientific and Technical Information of China (English)

    Feng Man; Wu Lenan

    2009-01-01

    This paper introduces throughput-efficient wireless system based on an extension to binary phase modulations, named extended binary phase shift keying (EBPSK), and the corresponding analysis of power spectra, especially the extension to channel capacity are given. Importantly, a novel sequential estimation and detection approach for this EBPSK system is proposed. The basic idea is to design a probabilistic approximation method for the computation of the maximum a posterior distribution via particle filtering method (PF). Subsequently, a new important function in PF is presented, so that the performance of the detector has a great improvement. Finally, computer simulation illustrates that EBPSK system has very high transmission rate, and also the good performance of the proposed PF detector is demonstrated.

  20. Industrial wireless sensor networks applications, protocols, and standards

    CERN Document Server

    Güngör, V Çagri

    2013-01-01

    The collaborative nature of industrial wireless sensor networks (IWSNs) brings several advantages over traditional wired industrial monitoring and control systems, including self-organization, rapid deployment, flexibility, and inherent intelligent processing. In this regard, IWSNs play a vital role in creating more reliable, efficient, and productive industrial systems, thus improving companies' competitiveness in the marketplace. Industrial Wireless Sensor Networks: Applications, Protocols, and Standards examines the current state of the art in industrial wireless sensor networks and outline

  1. Improving energy efficiency in wireless sensor networks through scheduling and routing

    CERN Document Server

    R, Rathna; 10.5121/ijassn.2012.2103

    2012-01-01

    This paper is about the wireless sensor network in environmental monitoring applications. A Wireless Sensor Network consists of many sensor nodes and a base station. The number and type of sensor nodes and the design protocols for any wireless sensor network is application specific. The sensor data in this application may be light intensity, temperature, pressure, humidity and their variations .Clustering and routing are the two areas which are given more attention in this paper.

  2. Energy Efficiency Performance Improvements for Ant-Based Routing Algorithm in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Adamu Murtala Zungeru

    2013-01-01

    Full Text Available The main problem for event gathering in wireless sensor networks (WSNs is the restricted communication range for each node. Due to the restricted communication range and high network density, event forwarding in WSNs is very challenging and requires multihop data forwarding. Currently, the energy-efficient ant based routing (EEABR algorithm, based on the ant colony optimization (ACO metaheuristic, is one of the state-of-the-art energy-aware routing protocols. In this paper, we propose three improvements to the EEABR algorithm to further improve its energy efficiency. The improvements to the original EEABR are based on the following: (1 a new scheme to intelligently initialize the routing tables giving priority to neighboring nodes that simultaneously could be the destination, (2 intelligent update of routing tables in case of a node or link failure, and (3 reducing the flooding ability of ants for congestion control. The energy efficiency improvements are significant particularly for dynamic routing environments. Experimental results using the RMASE simulation environment show that the proposed method increases the energy efficiency by up to 9% and 64% in converge-cast and target-tracking scenarios, respectively, over the original EEABR without incurring a significant increase in complexity. The method is also compared and found to also outperform other swarm-based routing protocols such as sensor-driven and cost-aware ant routing (SC and Beesensor.

  3. Using adaline neural network for performance improvement of smart antennas in TDD wireless communications.

    Science.gov (United States)

    Kavak, Adnan; Yigit, Halil; Ertunc, H Metin

    2005-11-01

    In time-division-duplex (TDD) mode wireless communications, downlink beamforming performance of a smart antenna system at the base station can be degraded due to variation of spatial signature vectors corresponding to mobile users especially in fast fading scenarios. To mitigate this, downlink beams must be controlled by properly adjusting their weight vectors in response to changing propagation dynamics. This can be achieved by modeling the spatial signature vectors in the uplink period and then predicting them to be used as beamforming weight vectors for the new mobile position in the downlink transmission period. We show that ADAptive LInear NEuron (ADALINE) network modeling based prediction of spatial signatures provides certain level of performance improvement compared to conventional beamforming method that employs spatial signature obtained in previous uplink interval. We compare the performance of ADALINE with autoregressive (AR) modeling based predictions under varying channel propagation (mobile speed, multipath angle spread, and number of multipaths), and filter order/delay conditions. ADALINE modeling outperforms AR modeling in terms of downlink SNR improvement and relative error improvement especially under high mobile speeds, i.e., V = 100 km/h.

  4. An Optimization Technique for Improved VoIP Performance over Wireless LAN

    Directory of Open Access Journals (Sweden)

    Tamal Chakraborty

    2012-03-01

    Full Text Available The performance of wireless LANs is greatly affected by pathloss, RF interference and other sources of signal attenuation, in addition to network congestion. The primary factors involved in effective real-time communication, namely delay and loss, must be within certain controlled limits in such a scenario. In this paper, we analyze the various factors driving IEEE 802.11b access points through extensive simulations and thereafter develop an optimization technique to configure the parameters of the access points. We simulate our test bed scenario and apply the developed algorithm. We then implement the configured parameters in our SIP enabled test bed to provide optimum Voice over IP (VoIP performance. Thereafter, we further analyze and optimize the parameters of the communicating nodes being realized through Xlite soft phones that enhance VoIP performance to a much better extent both for voice and video calls. Test bed results confirm an improvement from 22% packet loss to 3% considering both AP and node configurations together. Finally, we propose optimization algorithm for proper selection of threshold parameters in active queue management system. Results verify significant performance improvement in VoIP under congested scenarios. Simulation and measured results have also been included.

  5. Superframe Duration Allocation Schemes to Improve the Throughput of Cluster-Tree Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Erico Leão

    2017-01-01

    Full Text Available The use ofWireless Sensor Network (WSN technologies is an attractive option to support wide-scale monitoring applications, such as the ones that can be found in precision agriculture, environmental monitoring and industrial automation. The IEEE 802.15.4/ZigBee cluster-tree topology is a suitable topology to build wide-scale WSNs. Despite some of its known advantages, including timing synchronisation and duty-cycle operation, cluster-tree networks may suffer from severe network congestion problems due to the convergecast pattern of its communication traffic. Therefore, the careful adjustment of transmission opportunities (superframe durations allocated to the cluster-heads is an important research issue. This paper proposes a set of proportional Superframe Duration Allocation (SDA schemes, based on well-defined protocol and timing models, and on the message load imposed by child nodes (Load-SDA scheme, or by number of descendant nodes (Nodes-SDA scheme of each cluster-head. The underlying reasoning is to adequately allocate transmission opportunities (superframe durations and parametrize buffer sizes, in order to improve the network throughput and avoid typical problems, such as: network congestion, high end-to-end communication delays and discarded messages due to buffer overflows. Simulation assessments show how proposed allocation schemes may clearly improve the operation of wide-scale cluster-tree networks.

  6. Superframe Duration Allocation Schemes to Improve the Throughput of Cluster-Tree Wireless Sensor Networks.

    Science.gov (United States)

    Leão, Erico; Montez, Carlos; Moraes, Ricardo; Portugal, Paulo; Vasques, Francisco

    2017-01-27

    The use ofWireless Sensor Network (WSN) technologies is an attractive option to support wide-scale monitoring applications, such as the ones that can be found in precision agriculture, environmental monitoring and industrial automation. The IEEE 802.15.4/ZigBee cluster-tree topology is a suitable topology to build wide-scale WSNs. Despite some of its known advantages, including timing synchronisation and duty-cycle operation, cluster-tree networks may suffer from severe network congestion problems due to the convergecast pattern of its communication traffic. Therefore, the careful adjustment of transmission opportunities (superframe durations) allocated to the cluster-heads is an important research issue. This paper proposes a set of proportional Superframe Duration Allocation (SDA) schemes, based on well-defined protocol and timing models, and on the message load imposed by child nodes (Load-SDA scheme), or by number of descendant nodes (Nodes-SDA scheme) of each cluster-head. The underlying reasoning is to adequately allocate transmission opportunities (superframe durations) and parametrize buffer sizes, in order to improve the network throughput and avoid typical problems, such as: network congestion, high end-to-end communication delays and discarded messages due to buffer overflows. Simulation assessments show how proposed allocation schemes may clearly improve the operation of wide-scale cluster-tree networks.

  7. Superframe Duration Allocation Schemes to Improve the Throughput of Cluster-Tree Wireless Sensor Networks

    Science.gov (United States)

    Leão, Erico; Montez, Carlos; Moraes, Ricardo; Portugal, Paulo; Vasques, Francisco

    2017-01-01

    The use of Wireless Sensor Network (WSN) technologies is an attractive option to support wide-scale monitoring applications, such as the ones that can be found in precision agriculture, environmental monitoring and industrial automation. The IEEE 802.15.4/ZigBee cluster-tree topology is a suitable topology to build wide-scale WSNs. Despite some of its known advantages, including timing synchronisation and duty-cycle operation, cluster-tree networks may suffer from severe network congestion problems due to the convergecast pattern of its communication traffic. Therefore, the careful adjustment of transmission opportunities (superframe durations) allocated to the cluster-heads is an important research issue. This paper proposes a set of proportional Superframe Duration Allocation (SDA) schemes, based on well-defined protocol and timing models, and on the message load imposed by child nodes (Load-SDA scheme), or by number of descendant nodes (Nodes-SDA scheme) of each cluster-head. The underlying reasoning is to adequately allocate transmission opportunities (superframe durations) and parametrize buffer sizes, in order to improve the network throughput and avoid typical problems, such as: network congestion, high end-to-end communication delays and discarded messages due to buffer overflows. Simulation assessments show how proposed allocation schemes may clearly improve the operation of wide-scale cluster-tree networks. PMID:28134822

  8. Cryptanalysis and Security Improvements of ‘Two-Factor User Authentication in Wireless Sensor Networks’

    Directory of Open Access Journals (Sweden)

    Muhammad Khurram Khan

    2010-03-01

    Full Text Available User authentication in wireless sensor networks (WSN is a critical security issue due to their unattended and hostile deployment in the field. Since sensor nodes are equipped with limited computing power, storage, and communication modules; authenticating remote users in such resource-constrained environments is a paramount security concern. Recently, M.L. Das proposed a two-factor user authentication scheme in WSNs and claimed that his scheme is secure against different kinds of attack. However, in this paper, we show that the M.L. Das-scheme has some critical security pitfalls and cannot be recommended for real applications. We point out that in his scheme: users cannot change/update their passwords, it does not provide mutual authentication between gateway node and sensor node, and is vulnerable to gateway node bypassing attack and privileged-insider attack. To overcome the inherent security weaknesses of the M.L. Das-scheme, we propose improvements and security patches that attempt to fix the susceptibilities of his scheme. The proposed security improvements can be incorporated in the M.L. Das-scheme for achieving a more secure and robust two-factor user authentication in WSNs.

  9. Investigation of Improved Methods in Power Transfer Efficiency for Radiating Near-Field Wireless Power Transfer

    Directory of Open Access Journals (Sweden)

    Hesheng Cheng

    2016-01-01

    Full Text Available A metamaterial-inspired efficient electrically small antenna is proposed, firstly. And then several improving power transfer efficiency (PTE methods for wireless power transfer (WPT systems composed of the proposed antenna in the radiating near-field region are investigated. Method one is using a proposed antenna as a power retriever. This WPT system consisted of three proposed antennas: a transmitter, a receiver, and a retriever. The system is fed by only one power source. At a fixed distance from receiver to transmitter, the distance between the transmitter and the retriever is turned to maximize power transfer from the transmitter to the receiver. Method two is using two proposed antennas as transmitters and one antenna as receiver. The receiver is placed between the two transmitters. In this system, two power sources are used to feed the two transmitters, respectively. By adjusting the phase difference between the two feeding sources, the maximum PTE can be obtained at the optimal phase difference. Using the same configuration as method two, method three, where the maximum PTE can be increased by regulating the voltage (or power ratio of the two feeding sources, is proposed. In addition, we combine the proposed methods to construct another two schemes, which improve the PTE at different extent than classical WPT system.

  10. An improved energy aware distributed unequal clustering protocol for heterogeneous wireless sensor networks

    Directory of Open Access Journals (Sweden)

    Vrinda Gupta

    2016-06-01

    Full Text Available In this paper, an improved version of the energy aware distributed unequal clustering protocol (EADUC is projected. The EADUC protocol is commonly used for solving energy hole problem in multi-hop wireless sensor networks. In the EADUC, location of base station and residual energy are given importance as clustering parameters. Based on these parameters, different competition radii are assigned to nodes. Herein, a new approach has been proposed to improve the working of EADUC, by electing cluster heads considering number of nodes in the neighborhood in addition to the above two parameters. The inclusion of the neighborhood information for computation of the competition radii provides better balancing of energy in comparison with the existing approach. Furthermore, for the selection of next hop node, the relay metric is defined directly in terms of energy expense instead of only the distance information used in the EADUC and the data transmission phase has been extended in every round by performing the data collection number of times through use of major slots and mini-slots. The methodology used is of retaining the same clusters for a few rounds and is effective in reducing the clustering overhead. The performance of the proposed protocol has been evaluated under three different scenarios and compared with existing protocols through simulations. The results show that the proposed scheme outperforms the existing protocols in terms of network lifetime in all the scenarios.

  11. Implementation of Energy Efficiency Based on Time Scheduling to Improve Network Lifetime in Wireless Body Area Network (WBAN

    Directory of Open Access Journals (Sweden)

    Subono .

    2016-04-01

    Full Text Available ZigBee applications of IEEE 802.15.4 Wireless Sensor Network (WSN with Low Rate Wireless Personal Area Network (LR-WPAN can be integrated with e-health technology Wireless Body Area Network (WBAN. WBAN are small size and can communicate quickly making it easier for people to obtain information accurately.WBAN has a variety of functions that can help human life. It can be used in the e-health, military and sports. WBAN has the potential to be the future of wireless communication solutions. WBAN use battery as its primary power source. WBAN has limited energy and must be able to save energy consumption in order to operate for a long time. In this study, we propose a method of time scheduling called cycle sleep period (CSP as WBAN solutions to save energy and improve energy efficiency. The CSP method is implemented in the real hardware testbed using sensor e-health includes temperature body and current sensor. We compared the performance of CSP method with duty cycle management (DCM time scheduling-based and without using time scheduling.From the measurement results, our proposed idea has decreasingenergy consumption. Keywords: WSN, LR-WPAN, WBAN, e-health, Time Scheduling

  12. An Improved Rectenna for Wireless Power Transmission for Unmanned Air Vehicles

    Science.gov (United States)

    2011-09-01

    A. Background The concept of wireless power transmission (WPT) dates back to the days of Heinrich Hertz and Nikola Tesla [1], who discovered that...energy could be transported by electromagnetic waves in free space. Tesla considered the use of wireless power transmission employing low-frequency...his article, Brown wrote a description of the development of WPT and the milestones along the way. Previously, Tesla carried out numerous

  13. ENERGY CONSUMPTION IMPROVEMENT OF TRADITIONAL CLUSTERING METHOD IN WIRELESS SENSOR NETWORK

    Directory of Open Access Journals (Sweden)

    Tran Cong Hung

    2016-09-01

    Full Text Available In the traditional clustering routing protocol of wireless sensor network, LEACH protocol (Low Energy Adaptive Clustering Hierarchy is considered to have many outstanding advantages in the implementation of the hierarchy according to low energy adaptive cluster to collect and distribute the data to the base station. The main objective of LEACH is: To prolong life time of the network, reduce the energy consumption by each node, using the data concentration to reduce bulletins in the network. However, in the case of large network, the distance from the nodes to the base station is very different. Therefore, the energy consumption when becoming the host node is very different but LEACH is not based on the remaining energy to choose the host node, which is based on the number of times to become the host node in the previous rounds. This makes the nodes far away from the base station lose power sooner. In this paper, we give a new routing protocol based on the LEACH protocol in order to improve operating time of sensor network by considering energy issues and distance in selecting the cluster-head (CH, at that time the nodes with high energy and near the base station (BS will have a greater probability of becoming the cluster-head than the those in far and with lower energy.

  14. IMPROVED ALGORITHM FOR MINIMUM DATA AGGREGATION TIME PROBLEM IN WIRELESS SENSOR NETWORKS

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Wireless sensor networks promise a new paradigm for gathering data via collaboration among sensors spreading over a large geometrical region.Many applications impose delay requirements for data gathering and ask for time-efficient schedules for aggregating sensed data and sending to the data sink.In this paper,the authors study the minimum data aggregation time problem under collision-free transmission model.In each time round,data sent by a sensor reaches all sensors within its transmission range,but a sensor can receive data only when it is the only data that reaches the sensor.The goal is to find the method that schedules data transmission and aggregation at sensors so that the time for all requested data to be sent to the data sink is minimal.The authors propose anew approximation algorithm for this NP-hard problem with guaranteed performance ratio 7△/log2|S| + c,which significantly reduces the current best ratio of △-1,where S is the set of sensors containing source data,△ is the maximal number of sensors within the transmission range of any sensor,and c is a constant.The authors also conduct extensive simulation,the obtained results justify the improvement of proposed algorithm over the existing one.

  15. An improved multiplicative exponent weighting vertical handoff algorithm for WLAN/WCDMA heterogeneous wireless networks

    Institute of Scientific and Technical Information of China (English)

    Liu Shengmei; Pan Su; Mi Zhengkun; Meng Qingmin; Xu Minghai

    2012-01-01

    An improved MEW ( muhiplicative exponent weighting) algorithm, SLE-MEW is proposed for vertical handoff decision in heterogeneous wireless networks. It introduces the SINR( signal to interference plus noise ratio) effects, LS (least square) and information entropy method into the algorithm. An attribute matrix is constructed considering the SINR in the source network and the equivalent SINR in the target network, the required bandwidth, the traffic cost and the available bandwidth of participating access networks. Handoff decision meeting multi-attribute QoS(quality of serv- ice) requirement is made according to the traffic features. The subjective weight relation of decision elements is determined with LS method. The information entropy method is employed to derive the objective weights of the evaluation criteria, and lead to the comprehensive weight. Finally decision is made using MEW algorithm based on the attribute matrix and weight vector. Four 3GPP( the 3rd generation partnership project) defined traffic classes are considered in performance evaluation. The simulation results have shown that the proposed algorithm can provide satisfactory performance fitting to the characteristics of the traffic.

  16. AN APPLICATION SPECIFIC WINDOWS MANAGEMENT INSTRUMENTATION ARCHITECTURE FOR IMPROVING PERFORMANCE ON WIRELESS NETWORK

    Directory of Open Access Journals (Sweden)

    Lavanya Sankara Narayanan

    2014-01-01

    Full Text Available Wireless Communications is one of the fastest growing segments in the communications industry. Wireless Network is the network that facilitates communication among two or more computers connected through the standard network protocols, without network cabling. Generally, the Wireless Network is termed as Wireless Local Area Networks (WLAN. A WLAN is a collection of network components connected by electromagnetic (radio waves instead of cables. Each Wireless Network consists of a Network Provider, which provides the network connection to the user. With the help of this network provider, the client (user can able to transfer the data to and from the server. In this process, if the speed between the client and the server does not match, then there may be the chance for data loss. Due to the data loss, the network performance will get reduced. To avoid these problems, we propose architecture for wireless network communication, in order to reduce the data loss and other problems and to increase the network performance. The proposed architecture can able to perform on both the TCP layer and UDP layer.

  17. White light-emitting diode based wireless orthogonal frequency division multiplexing link with improved transmission capacity using Bayesian compressive sensing

    Science.gov (United States)

    Won, Yong-Yuk; Seo, Dong-Sun; Yoon, Sang Min

    2016-04-01

    We propose a technique that improves the channel capacity of an optical wireless orthogonal frequency division multiplexing (OFDM) transmission, which employs a visible light-emitting diode. An OFDM waveform encoded by quadrature phase shift keying (QPSK) or 16-quadrature amplitude modulation is compressed and then transformed into a sparse waveform using a proposed advanced systematic sampling. At the optical wireless receiver, the original waveform is recovered by L1-minimization based on a Bayesian compressive sensing. Our experimental results show the significant increase in the channel capacity from 31.12 to 51.87 Mbit/s at forward error correction limit (i.e., error vector magnitude of 32%) in case of QPSK symbols.

  18. A Wireless Sensor Enabled by Wireless Power

    Science.gov (United States)

    Lee, Da-Sheng; Liu, Yu-Hong; Lin, Chii-Ruey

    2012-01-01

    Through harvesting energy by wireless charging and delivering data by wireless communication, this study proposes the concept of a wireless sensor enabled by wireless power (WPWS) and reports the fabrication of a prototype for functional tests. One WPWS node consists of wireless power module and sensor module with different chip-type sensors. Its main feature is the dual antenna structure. Following RFID system architecture, a power harvesting antenna was designed to gather power from a standard reader working in the 915 MHz band. Referring to the Modbus protocol, the other wireless communication antenna was integrated on a node to send sensor data in parallel. The dual antenna structure integrates both the advantages of an RFID system and a wireless sensor. Using a standard UHF RFID reader, WPWS can be enabled in a distributed area with a diameter up to 4 m. Working status is similar to that of a passive tag, except that a tag can only be queried statically, while the WPWS can send dynamic data from the sensors. The function is the same as a wireless sensor node. Different WPWSs equipped with temperature and humidity, optical and airflow velocity sensors are tested in this study. All sensors can send back detection data within 8 s. The accuracy is within 8% deviation compared with laboratory equipment. A wireless sensor network enabled by wireless power should be a totally wireless sensor network using WPWS. However, distributed WPWSs only can form a star topology, the simplest topology for constructing a sensor network. Because of shielding effects, it is difficult to apply other complex topologies. Despite this limitation, WPWS still can be used to extend sensor network applications in hazardous environments. Further research is needed to improve WPWS to realize a totally wireless sensor network. PMID:23443370

  19. A Wireless Sensor Enabled by Wireless Power

    Directory of Open Access Journals (Sweden)

    Da-Sheng Lee

    2012-11-01

    Full Text Available Through harvesting energy by wireless charging and delivering data by wireless communication, this study proposes the concept of a wireless sensor enabled by wireless power (WPWS and reports the fabrication of a prototype for functional tests. One WPWS node consists of wireless power module and sensor module with different chip-type sensors. Its main feature is the dual antenna structure. Following RFID system architecture, a power harvesting antenna was designed to gather power from a standard reader working in the 915 MHz band. Referring to the Modbus protocol, the other wireless communication antenna was integrated on a node to send sensor data in parallel. The dual antenna structure integrates both the advantages of an RFID system and a wireless sensor. Using a standard UHF RFID reader, WPWS can be enabled in a distributed area with a diameter up to 4 m. Working status is similar to that of a passive tag, except that a tag can only be queried statically, while the WPWS can send dynamic data from the sensors. The function is the same as a wireless sensor node. Different WPWSs equipped with temperature and humidity, optical and airflow velocity sensors are tested in this study. All sensors can send back detection data within 8 s. The accuracy is within 8% deviation compared with laboratory equipment. A wireless sensor network enabled by wireless power should be a totally wireless sensor network using WPWS. However, distributed WPWSs only can form a star topology, the simplest topology for constructing a sensor network. Because of shielding effects, it is difficult to apply other complex topologies. Despite this limitation, WPWS still can be used to extend sensor network applications in hazardous environments. Further research is needed to improve WPWS to realize a totally wireless sensor network.

  20. An Implementation of Wireless Body Area Networks for Improving Priority Data Transmission Delay.

    Science.gov (United States)

    Gündoğdu, Köksal; Çalhan, Ali

    2016-03-01

    The rapid growth of wireless sensor networks has enabled the human health monitoring of patients using body sensor nodes that gather and evaluate human body parameters and movements. This study describes both simulation model and implementation of a new traffic sensitive wireless body area network by using non-preemptive priority queue discipline. A wireless body area network implementation employing TDMA is designed with three different priorities of data traffics. Besides, a coordinator node having the non-preemptive priority queue is performed in this study. We have also developed, modeled and simulated example network scenarios by using the Riverbed Modeler simulation software with the purpose of verifying the implementation results. The simulation results obtained under various network load conditions are consistent with the implementation results.

  1. Improving Energy Efficiency Cable Production

    Directory of Open Access Journals (Sweden)

    Iashutina Olga

    2016-01-01

    Full Text Available During the energy calculation is made at different temperatures of the heating surface. The influence of the speed of pulling on the cost of the finished products of cable products. The interrelation of speed broaching and temperature of the heating surface.

  2. Ant Colony Optimization For Improving Network Lifetime In Wireless Sensor Networks

    OpenAIRE

    Sunny Behal; Mr. Amandeep Singh

    2013-01-01

    Wireless sensor networks is very important field in today’s technology and one may concern about the life time of sensors as they have no facility to change the battery of those sensors inside the field. Wireless Sensor Networks are prone to node failure due to power loss. In order to provide reliable service through the network, the network should be self-adjusting and must have adaptable properties as required from time to time. Here in this research we have proposed a new algorithm which i...

  3. Cooperative wireless communications

    CERN Document Server

    Zhang, Yan

    2009-01-01

    Cooperative devices and mechanisms are increasingly important to enhance the performance of wireless communications and networks, with their ability to decrease power consumption and packet loss rate and increase system capacity, computation, and network resilience. Considering the wide range of applications, strategies, and benefits associated with cooperative wireless communications, researchers and product developers need a succinct understanding of relevant theory, fundamentals, and techniques to navigate this challenging field. ""Cooperative Wireless Communications"" provides just that. I

  4. Truncated power control for improving TCP/IP performance over CDMA wireless links

    DEFF Research Database (Denmark)

    Cianca, Ernestina; Prasad, Ramjee; De Sanctis, Mauro

    2005-01-01

    The issue of the performance degradation of transmission control protocol/Internet Protocol (TCP/IP) over wireless links due to the presence of noncongestion-related packet losses has been addressed with a physical layer approach. The effectiveness of automatic repeat request techniques in enhanc...

  5. Improved Relay Node Placement Algorithm for Wireless Sensor Networks Application in Wind Farm

    DEFF Research Database (Denmark)

    Chen, Qinyin; Hu, Y.; Chen, Zhe

    2013-01-01

    An emergent application of Wireless Sensor Network (WSN) technology is in the area of Wind Farm Monitoring (WFM), in which relays are used to connect sensors. Key problems to solve in WFM include how to balance loads across relay nodes and how to place relay nodes for redundancy and fault-toleran...

  6. Improved Relay Node Placement Algorithm for Wireless Sensor Networks Application in Wind Farm

    DEFF Research Database (Denmark)

    Chen, Qinyin; Hu, Y.; Chen, Zhe

    2013-01-01

    An emergent application of Wireless Sensor Network (WSN) technology is in the area of Wind Farm Monitoring (WFM), in which relays are used to connect sensors. Key problems to solve in WFM include how to balance loads across relay nodes and how to place relay nodes for redundancy and fault...

  7. Application of biotechnology to improve livestock products

    Directory of Open Access Journals (Sweden)

    Swati Gupta

    Full Text Available Biotechnological achievements of recent years have emerged as powerful tool to improve quality attributes of livestock products including milk and meat products. Biotechnological approaches can be employed for improving productivity, economy, physicochemical and nutritional attributes of a wide range of livestock products. The target areas of biotechnological research in the field of livestock products can be envisaged as production of high yielding food animal, improvement in quality of their products, enhanced production of natural food grade preservatives, efficient byproduct utilization and so forth. Many of the biotechnological techniques can be explored in the area of quality assurance programmes, which would be of great help to produce livestock products of assured quality and public health safety. [Vet World 2012; 5(10.000: 634-638

  8. Design Review Improvements Product Overview

    Science.gov (United States)

    2015-05-07

    Boeing Anne Ramsey, Harris Corporation Ronald H. Mandel, Lockheed Martin Mark King, Micropac Industries Melanie Berg , NASA Cindy Kohlmiller...Improvements Topic • Design escapes continue to impact program cost, schedule and mission performance • Our design review and development test programs...for and conduct design reviews – Surveyed team member companies – 49 test cases – Reviewed Aerospace on-orbit anomaly data (Classified) – 121 test cases

  9. Improving functional value of meat products.

    Science.gov (United States)

    Zhang, Wangang; Xiao, Shan; Samaraweera, Himali; Lee, Eun Joo; Ahn, Dong U

    2010-09-01

    In recent years, much attention has been paid to develop meat and meat products with physiological functions to promote health conditions and prevent the risk of diseases. This review focuses on strategies to improve the functional value of meat and meat products. Value improvement can be realized by adding functional compounds including conjugated linoneleic acid, vitamin E, n3 fatty acids and selenium in animal diets to improve animal production, carcass composition and fresh meat quality. In addition, functional ingredients such as vegetable proteins, dietary fibers, herbs and spices, and lactic acid bacteria can be directly incorporated into meat products during processing to improve their functional value for consumers. Functional compounds, especially peptides, can also be generated from meat and meat products during processing such as fermentation, curing and aging, and enzymatic hydrolysis. This review further discusses the current status, consumer acceptance, and market for functional foods from the global viewpoints. Future prospects for functional meat and meat products are also discussed.

  10. Performance improvement for applying network virtualization in fiber-wireless (FiWi) access networks

    Institute of Scientific and Technical Information of China (English)

    Qing-long DAI; Guo-chu SHOU; Yi-hong HU; Zhi-gang GUO

    2014-01-01

    Fiber-wireless (FiWi) access networks, which are a combination of fiber networks and wireless networks, have the advantages of both networks, such as high bandwidth, high security, low cost, and flexible access. However, with the increasing need for bandwidth and types of service from users, FiWi networks are still relatively incapable and ossified. To alleviate bandwidth tension and facilitate new service deployment, we attempt to apply network virtualization in FiWi networks, in which the network’s control plane and data plane are separated from each other. Based on a previously proposed hierarchical model and service model for FiWi network virtualization, the process of service implementation is described. The performances of the FiWi access networks applying network virtualization are analyzed in detail, including bandwidth for links, throughput for nodes, and multipath flow transmission. Simulation results show that the FiWi network with virtualization is superior to that without.

  11. Adaptive Data Aggregation and Compression to Improve Energy Utilization in Solar-Powered Wireless Sensor Networks.

    Science.gov (United States)

    Yoon, Ikjune; Kim, Hyeok; Noh, Dong Kun

    2017-05-27

    A node in a solar-powered wireless sensor network (WSN) collects energy when the sun shines and stores it in a battery or capacitor for use when no solar power is available, in particular at night. In our scheme, each tiny node in a WSN periodically determines its energy budget, which takes into account its residual energy, and its likely acquisition and consumption. If it expects to acquire more energy than it can store, the data which has it has sensed is aggregated with data from other nodes, compressed, and transmitted. Otherwise, the node continues to sense data, but turns off its wireless communication to reduce energy consumption. We compared several schemes by simulation. Our scheme reduced the number of nodes forced to black out due to lack of energy so that more data arrives at the sink node.

  12. A Performance Evaluation of Improved IPv6 Routing Protocol for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Vu Chien Thang

    2016-12-01

    Full Text Available In the near future, IP-based wireless sensor networks will play a key role in several application scenarios such as smart grid, smart home, healthcare, and building automation... An IPv6 routing protocol is expected to provide internet connectivity to any IP-based sensor node. In this paper, we propose IRPL protocol for IP-based wireless sensor networks. IRPL protocol uses a combination of two routing metrics that are the link quality and the remaining energy state of the preferred parent to select the optimal path. In IRPL protocol, we combine two metrics based on an alpha weight. IRPL protocol is implemented in ContikiOS and evaluated by using simulation and testbed experiments. The results show that IRPL protocol has achieved better network lifetime, data delivery ratio and energy balance compared to the traditional solution of RPL protocol

  13. On Throughput Improvement of Wireless Ad Hoc Networks with Hidden Nodes

    Science.gov (United States)

    Choi, Hong-Seok; Lim, Jong-Tae

    In this letter, we present the throughput analysis of the wireless ad hoc networks based on the IEEE 802.11 MAC (Medium Access Control). Especially, our analysis includes the case with the hidden node problem so that it can be applied to the multi-hop networks. In addition, we suggest a new channel access control algorithm to maximize the network throughput and show the usefulness of the proposed algorithm through simulations.

  14. I Am 4 VHO: New Approach to Improve Seamless Vertical Handover in Heterogeneous Wireless Networks

    OpenAIRE

    Khattab, OAO; Alani, OYK

    2013-01-01

    Two mechanisms have been proposed independently by IEEE and 3GPP; namely, Media Independent\\ud Handover (MIH) and Access Network Discovery and Selection Function (ANDSF), respectively. These\\ud mechanisms enable a seamless Vertical Handover (VHO) between the different types of technologies\\ud (3GPP and non-3GPP), such as GSM (Global System for Mobile Communication), Wireless Fidelity (Wi-\\ud Fi), Worldwide Interoperability for Microwave Access (WiMAX), Universal Mobile Telecommunications\\ud S...

  15. Bayes Node Energy Polynomial Distribution to Improve Routing in Wireless Sensor Network.

    Directory of Open Access Journals (Sweden)

    Thirumoorthy Palanisamy

    Full Text Available Wireless Sensor Network monitor and control the physical world via large number of small, low-priced sensor nodes. Existing method on Wireless Sensor Network (WSN presented sensed data communication through continuous data collection resulting in higher delay and energy consumption. To conquer the routing issue and reduce energy drain rate, Bayes Node Energy and Polynomial Distribution (BNEPD technique is introduced with energy aware routing in the wireless sensor network. The Bayes Node Energy Distribution initially distributes the sensor nodes that detect an object of similar event (i.e., temperature, pressure, flow into specific regions with the application of Bayes rule. The object detection of similar events is accomplished based on the bayes probabilities and is sent to the sink node resulting in minimizing the energy consumption. Next, the Polynomial Regression Function is applied to the target object of similar events considered for different sensors are combined. They are based on the minimum and maximum value of object events and are transferred to the sink node. Finally, the Poly Distribute algorithm effectively distributes the sensor nodes. The energy efficient routing path for each sensor nodes are created by data aggregation at the sink based on polynomial regression function which reduces the energy drain rate with minimum communication overhead. Experimental performance is evaluated using Dodgers Loop Sensor Data Set from UCI repository. Simulation results show that the proposed distribution algorithm significantly reduce the node energy drain rate and ensure fairness among different users reducing the communication overhead.

  16. Robust Video Transmission Over Broadband Wireless Fading Channels Using Improved MPEG-4 DataPartitioning

    Institute of Scientific and Technical Information of China (English)

    WANGDonghua; ZHOUYuanhua; SUPengcheng; GEJingyan

    2004-01-01

    A robust video transmission scheme based on space-time coded Orthogonal frequency division multiplexing (OFDM) over broadband wireless fading channels is proposed. Considering the MPEG-4 standardized data partitioning method doesn't take care of important high frequency information of IVOP and Direct current (DC) coefficients of PVOP and has poor error concealment effects for lost texture data with abundant details, a more robust data partitioning method called NewDP is designed after significances of some MPEG-4 Simple profile (SP) bitstreams' syntactical elements are carefully analyzed and tested. Then, the UEP method based on Systemic ratecompatible punctured convolutional channel codes (SRCPC) is applied to protect layered video bitstreams with different priorities. For fighting with fading and noise in wireless channels, Space-time block codes (STBC) combined with OFDM are applied in our scheme. STBC can provide diversity gains by multiple transmit antennae while OFDM can effectively alleviate frequency-selective fading effects, making our scheme more robust as well as higher transmitting rates. Simulation results show that our scheme can get better video transmission effects over broadband wireless fading channels than the schemes using the Equal error protection method (EEP) or based on the MPEG-4 standardized data partitioning methods.

  17. Bayes Node Energy Polynomial Distribution to Improve Routing in Wireless Sensor Network.

    Science.gov (United States)

    Palanisamy, Thirumoorthy; Krishnasamy, Karthikeyan N

    2015-01-01

    Wireless Sensor Network monitor and control the physical world via large number of small, low-priced sensor nodes. Existing method on Wireless Sensor Network (WSN) presented sensed data communication through continuous data collection resulting in higher delay and energy consumption. To conquer the routing issue and reduce energy drain rate, Bayes Node Energy and Polynomial Distribution (BNEPD) technique is introduced with energy aware routing in the wireless sensor network. The Bayes Node Energy Distribution initially distributes the sensor nodes that detect an object of similar event (i.e., temperature, pressure, flow) into specific regions with the application of Bayes rule. The object detection of similar events is accomplished based on the bayes probabilities and is sent to the sink node resulting in minimizing the energy consumption. Next, the Polynomial Regression Function is applied to the target object of similar events considered for different sensors are combined. They are based on the minimum and maximum value of object events and are transferred to the sink node. Finally, the Poly Distribute algorithm effectively distributes the sensor nodes. The energy efficient routing path for each sensor nodes are created by data aggregation at the sink based on polynomial regression function which reduces the energy drain rate with minimum communication overhead. Experimental performance is evaluated using Dodgers Loop Sensor Data Set from UCI repository. Simulation results show that the proposed distribution algorithm significantly reduce the node energy drain rate and ensure fairness among different users reducing the communication overhead.

  18. Improvement in Medium Access Control protocol based on new contention scheme for wireless ad hoc network

    Directory of Open Access Journals (Sweden)

    C.Ellammal

    2012-05-01

    Full Text Available In todays wireless networks, stations using the IEEE 802.11 standard contend for the channel using the Distributed Coordination Function (DCF. Research has shown that DCF€™s performance degrades especially with the large number of stations. This becomes more concerning due to the increasing proliferation of wireless devices. In this paper, we present a Medium Access Control (MAC scheme for wireless LANs and compare its performance to DCF . Our scheme, which attempts to resolve the contention in a constant number of slots (or constant time, is called CONSTI. The contention resolution happens over a predefined number of slots. In a slot, the stations probabilistically send a jam signal on the channel. The stations listening retire if they hear a jam signal. The others continue to the next slot. Over several slots, we aim to have one station remaining in the contention, which will then transmit its data. We find the optimal parameters of CONSTI and present an analysis on its performance.

  19. Teaching Recognition Skills to Improve Products.

    Science.gov (United States)

    Knight, G. William; And Others

    1990-01-01

    First year dental students (n=86) in a conservative restorations course were taught a discrimination learning paradigm to improve production quality. Evaluation of Class 1 amalgam preparations indicates the improved recognition skills corresponded with improved cavity preparation, supporting the use of this teaching model. (Author/MSE)

  20. Power plant productivity improvement in New York

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    The New York Public Service Commission (PSC), under contract with the US Department of Energy (DOE), began a joint program in September 1978 to improve the productivity of coal and nuclear electric generating units in New York State. The project had dual objectives: to ensure that the utilities in New York State have or develop a systematic permanent, cost-effective productivity improvement program based on sound engineering and economic considerations, and to develop a model program for Power Plant Productivity Improvement, which, through DOE, can also be utilized by other regulatory commissions in the country. To accomplish these objectives, the program was organized into the following sequence of activities: compilation and analysis of power plant performance data; evaluation and comparison of utility responses to outage/derating events; power plant productivity improvement project cost-benefit analysis; and evaluation of regulatory procedures and policies for improving productivity. The program that developed for improving the productivity of coal units is substantially different than for nuclear units. Each program is presented, and recommendations are made for activities of both the utilities and regulatory agencies which will promote improved productivity.

  1. TCP NCE: A unified solution for non-congestion events to improve the performance of TCP over wireless networks

    Directory of Open Access Journals (Sweden)

    Sreekumari Prasanthi

    2011-01-01

    Full Text Available Abstract In this article, we propose a unified solution called Transmission Control Protocol (TCP for Non-Congestion Events (TCP NCE, to overcome the performance degradation of TCP due to non-congestion events over wireless networks. TCP NCE is capable to reduce the unnecessary reduction of congestion window size and retransmissions caused by non-congestion events such as random loss and packet reordering. TCP NCE consists of three schemes. Detection of non-congestion events (NCE-Detection, Differentiation of non-congestion events (NCE-Differentiation and Reaction to non-congestion events (NCE-Reaction. For NCE-Detection, we compute the queue length of the bottleneck link using TCP timestamp and for NCE-Differentiation, we utilize the flightsize information of the network with a dynamic delay threshold value. We introduce a new retransmission algorithm called 'Retransmission Delay' for NCE-Reaction which guides the TCP sender to react to non-congestion events by properly triggering the congestion control mechanism. According to the extensive simulation results using qualnet network simulator, TCP NCE acheives more than 70% throughput gain over TCP CERL and more than 95% throughput improvement as compared to TCP NewReno, TCP PR, RR TCP, TCP Veno, and TCP DOOR when the network coexisted with congestion and non-congestion events. Also, we compared the accuracy and fairness of TCP NCE and the result shows significant improvement over existing algorithms in wireless networks.

  2. In-Building Wireless Distribution in legacy Multimode Fiber with an improved RoMMF system

    DEFF Research Database (Denmark)

    Visani, Davide; Petersen, Martin Nordal; Sorci, Francesca

    2012-01-01

    A radio over multimode fiber (RoMMF) system for in-building wireless distribution employing a directly modulated Fabry-Perot (FP) transmitter and the central launch technique is presented. The worst-case spurious free dynamic range (SFDR) exceeds 105 dB×Hz2/3 up to 525 m of OM2 multimode fiber (MMF......). Experimental and theoretical results are reported showing that this scheme outperforms a RoMMF system employing a distributed feed-back (DFB) laser diode (LD) and/or a mode scrambler to achieve overfilled launch (OFL). Long Term Evolution (LTE) signal transmission is achieved with high quality in terms...

  3. Accelerating the transfer of improved production technologies ...

    African Journals Online (AJOL)

    Accelerating the transfer of improved production technologies: controlling African cassava mosaic ... African Crop Science Journal ... A national network of cassava workers (NANEC) was created to address the problem of technology transfer.

  4. Sum of ratios of products forα-μ random variables in wireless multihop relaying and multiple scattering

    KAUST Repository

    Wang, Kezhi

    2014-09-01

    The sum of ratios of products of independent 2642 2642α-μ random variables (RVs) is approximated by using the Generalized Gamma ratio approximation (GGRA) with Gamma ratio approximation (GRA) as a special case. The proposed approximation is used to calculate the outage probability of the equal gain combining (EGC) or maximum ratio combining (MRC) receivers for wireless multihop relaying or multiple scattering systems considering interferences. Numerical results show that the newly derived approximation works very well verified by the simulation, while GRA has a slightly worse performance than GGRA when outage probability is below 0.1 but with a more simplified form.

  5. IMPROVING PRODUCTIVITY IN A HEALTHCARE ORGANISATION

    OpenAIRE

    Herbert Mapfaira*, Robert Monageng, V. P. Kommula, Jerekias Gandure, Sethunyane Kethebe

    2016-01-01

    This project was undertaken to explore the journey to productivity improvement by a local hospital. The hospital recently implemented two process improvement tools, 5S and TQM. The project assessed the company’s adoption level of the two implemented lean tools, as well as assessing how the implementation impacted productivity and service delivery at the hospital. Current performance levels were also established in an endeavor to find if indeed what is reported is actually what is happening at...

  6. IMPROVING PRODUCTIVITY IN A HEALTHCARE ORGANISATION

    OpenAIRE

    Herbert Mapfaira*, Robert Monageng, V. P. Kommula, Jerekias Gandure, Sethunyane Kethebe

    2016-01-01

    This project was undertaken to explore the journey to productivity improvement by a local hospital. The hospital recently implemented two process improvement tools, 5S and TQM. The project assessed the company’s adoption level for the two lean tools they implemented, as well as assessing how the implementation impacted productivity and service delivery at the hospital. Current performance levels were also established in an endeavor to find if indeed what is reported is actually what is happen...

  7. An Optimized Hidden Node Detection Paradigm for Improving the Coverage and Network Efficiency in Wireless Multimedia Sensor Networks

    Science.gov (United States)

    Alanazi, Adwan; Elleithy, Khaled

    2016-01-01

    Successful transmission of online multimedia streams in wireless multimedia sensor networks (WMSNs) is a big challenge due to their limited bandwidth and power resources. The existing WSN protocols are not completely appropriate for multimedia communication. The effectiveness of WMSNs varies, and it depends on the correct location of its sensor nodes in the field. Thus, maximizing the multimedia coverage is the most important issue in the delivery of multimedia contents. The nodes in WMSNs are either static or mobile. Thus, the node connections change continuously due to the mobility in wireless multimedia communication that causes an additional energy consumption, and synchronization loss between neighboring nodes. In this paper, we introduce an Optimized Hidden Node Detection (OHND) paradigm. The OHND consists of three phases: hidden node detection, message exchange, and location detection. These three phases aim to maximize the multimedia node coverage, and improve energy efficiency, hidden node detection capacity, and packet delivery ratio. OHND helps multimedia sensor nodes to compute the directional coverage. Furthermore, an OHND is used to maintain a continuous node– continuous neighbor discovery process in order to handle the mobility of the nodes. We implement our proposed algorithms by using a network simulator (NS2). The simulation results demonstrate that nodes are capable of maintaining direct coverage and detecting hidden nodes in order to maximize coverage and multimedia node mobility. To evaluate the performance of our proposed algorithms, we compared our results with other known approaches. PMID:27618048

  8. An Optimized Hidden Node Detection Paradigm for Improving the Coverage and Network Efficiency in Wireless Multimedia Sensor Networks.

    Science.gov (United States)

    Alanazi, Adwan; Elleithy, Khaled

    2016-09-07

    Successful transmission of online multimedia streams in wireless multimedia sensor networks (WMSNs) is a big challenge due to their limited bandwidth and power resources. The existing WSN protocols are not completely appropriate for multimedia communication. The effectiveness of WMSNs varies, and it depends on the correct location of its sensor nodes in the field. Thus, maximizing the multimedia coverage is the most important issue in the delivery of multimedia contents. The nodes in WMSNs are either static or mobile. Thus, the node connections change continuously due to the mobility in wireless multimedia communication that causes an additional energy consumption, and synchronization loss between neighboring nodes. In this paper, we introduce an Optimized Hidden Node Detection (OHND) paradigm. The OHND consists of three phases: hidden node detection, message exchange, and location detection. These three phases aim to maximize the multimedia node coverage, and improve energy efficiency, hidden node detection capacity, and packet delivery ratio. OHND helps multimedia sensor nodes to compute the directional coverage. Furthermore, an OHND is used to maintain a continuous node- continuous neighbor discovery process in order to handle the mobility of the nodes. We implement our proposed algorithms by using a network simulator (NS2). The simulation results demonstrate that nodes are capable of maintaining direct coverage and detecting hidden nodes in order to maximize coverage and multimedia node mobility. To evaluate the performance of our proposed algorithms, we compared our results with other known approaches.

  9. A Model to Improve the Quality Products

    Directory of Open Access Journals (Sweden)

    Hasan GOKKAYA

    2010-08-01

    Full Text Available The topic of this paper is to present a solution who can improve product qualityfollowing the idea: “Unlike people who have verbal skills, machines use "sign language"to communicate what hurts or what has invaded their system’. Recognizing the "signs"or symptoms that the machine conveys is a required skill for those who work withmachines and are responsible for their care and feeding. The acoustic behavior of technical products is predominantly defined in the design stage, although the acoustic characteristics of machine structures can be analyze and give a solution for the actual products and create a new generation of products. The paper describes the steps intechnological process for a product and the solution who will reduce the costs with the non-quality of product and improve the management quality.

  10. Multi Attribute Content Distribution and Replication Based Video Streaming in Wireless Networks for Qos Improvement

    Directory of Open Access Journals (Sweden)

    A. Balakrishnan

    2015-10-01

    Full Text Available The growth of information technology has introduced various functionalities and services to support video streaming like video streaming and live streaming. There are many approaches has been discussed to support content delivery in wireless networks, but suffers with the problem of latency and quality of streaming which takes more time and the frequency of retransmission is high. To solve these problems, we propose a multi attribute location selection and distribution approach to select the location from where the video content has to be fetched and based on the multi attribute replication scheme new copy of the video content will be replicated in more locations according to various factors of quality of service. The proposed method maintains number of replicas  of video content in different locations of wireless networks. The method selects the location of the video content or the node which has the requested data according to the delay present in the network and the user location. Also the number of replicas maintained is performed according to the spatial request factor which represents the number of request being received from different user from a specific spatial region and the other factors like delay, number of users and the traffic incurred in the network towards a video content. The proposed method reduces the overall latency present in the network and increases the efficiency of content delivery which supports multimedia data transfer. Also the proposed method reduces the overall time complexity and reduces the overhead introduced by data transfer.

  11. Improving Biometric-Based Authentication Schemes with Smart Card Revocation/Reissue for Wireless Sensor Networks

    Science.gov (United States)

    Moon, Jongho; Lee, Donghoon; Lee, Youngsook; Won, Dongho

    2017-01-01

    User authentication in wireless sensor networks is more difficult than in traditional networks owing to sensor network characteristics such as unreliable communication, limited resources, and unattended operation. For these reasons, various authentication schemes have been proposed to provide secure and efficient communication. In 2016, Park et al. proposed a secure biometric-based authentication scheme with smart card revocation/reissue for wireless sensor networks. However, we found that their scheme was still insecure against impersonation attack, and had a problem in the smart card revocation/reissue phase. In this paper, we show how an adversary can impersonate a legitimate user or sensor node, illegal smart card revocation/reissue and prove that Park et al.’s scheme fails to provide revocation/reissue. In addition, we propose an enhanced scheme that provides efficiency, as well as anonymity and security. Finally, we provide security and performance analysis between previous schemes and the proposed scheme, and provide formal analysis based on the random oracle model. The results prove that the proposed scheme can solve the weaknesses of impersonation attack and other security flaws in the security analysis section. Furthermore, performance analysis shows that the computational cost is lower than the previous scheme. PMID:28441331

  12. WESBES: A Wireless Embedded Sensor for Improving Human Comfort Metrics using Temporospatially Correlated Data

    Energy Technology Data Exchange (ETDEWEB)

    Joel Hewlett; Milos Manic; Craig Rieger

    2012-08-01

    When utilized properly, energy management systems (EMS) can offer significant energy savings by optimizing the efficiency of heating, ventilation, and air-conditioning (HVAC) systems. However, difficulty often arises due to the constraints imposed by the need to maintain an acceptable level of comfort for a building’s occupants. This challenge is compounded by the fact that human comfort is difficult to define in a measurable way. One way to address this problem is to provide a building manager with direct feedback from the building’s users. Still, this data is relative in nature, making it difficult to determine the actions that need to be taken, and while some useful comfort correlations have been devised, such as ASHRAE’s Predicted Mean Vote index, they are rules of thumb that do not connect individual feedback with direct, diverse feedback sensing. As they are a correlation, quantifying effects of climate, age of buildings and associated defects such as draftiness, are outside the realm of this correlation. Therefore, the contribution of this paper is the Wireless Embedded Smart Block for Environment Sensing (WESBES); an affordable wireless sensor platform that allows subjective human comfort data to be directly paired with temporospatially correlated objective sensor measurements for use in EMS. The described device offers a flexible research platform for analyzing the relationship between objective and subjective occupant feedback in order to formulate more meaningful measures of human comfort. It could also offer an affordable and expandable option for real world deployment in existing EMS.

  13. Use of a Wireless Network of Accelerometers for Improved Measurement of Human Energy Expenditure

    Directory of Open Access Journals (Sweden)

    Alexander H. Montoye

    2014-04-01

    Full Text Available Single, hip-mounted accelerometers can provide accurate measurements of energy expenditure (EE in some settings, but are unable to accurately estimate the energy cost of many non-ambulatory activities. A multi-sensor network may be able to overcome the limitations of a single accelerometer. Thus, the purpose of our study was to compare the abilities of a wireless network of accelerometers and a hip-mounted accelerometer for the prediction of EE. Thirty adult participants engaged in 14 different sedentary, ambulatory, lifestyle and exercise activities for five minutes each while wearing a portable metabolic analyzer, a hip-mounted accelerometer (AG and a wireless network of three accelerometers (WN worn on the right wrist, thigh and ankle. Artificial neural networks (ANNs were created separately for the AG and WN for the EE prediction. Pearson correlations (r and the root mean square error (RMSE were calculated to compare criterion-measured EE to predicted EE from the ANNs. Overall, correlations were higher (r = 0.95 vs. r = 0.88, p < 0.0001 and RMSE was lower (1.34 vs. 1.97 metabolic equivalents (METs, p < 0.0001 for the WN than the AG. In conclusion, the WN outperformed the AG for measuring EE, providing evidence that the WN can provide highly accurate estimates of EE in adults participating in a wide range of activities.

  14. Improved Object Localization Using Accurate Distance Estimation in Wireless Multimedia Sensor Networks.

    Directory of Open Access Journals (Sweden)

    Yasar Abbas Ur Rehman

    Full Text Available Object localization plays a key role in many popular applications of Wireless Multimedia Sensor Networks (WMSN and as a result, it has acquired a significant status for the research community. A significant body of research performs this task without considering node orientation, object geometry and environmental variations. As a result, the localized object does not reflect the real world scenarios. In this paper, a novel object localization scheme for WMSN has been proposed that utilizes range free localization, computer vision, and principle component analysis based algorithms. The proposed approach provides the best possible approximation of distance between a wmsn sink and an object, and the orientation of the object using image based information. Simulation results report 99% efficiency and an error ratio of 0.01 (around 1 ft when compared to other popular techniques.

  15. Improvement of decentralized random decrement technique for data processing in wireless sensor network

    Science.gov (United States)

    Liu, Chengyin; Xu, Chunchuan; Teng, Jun

    2016-09-01

    The Random Decrement Technique (RDT), based on decentralized computing approaches implemented in wireless sensor networks (WSNs), has shown advantages for modal parameter and data aggregation identification. However, previous studies of RDT-based approaches from ambient vibration data are based on the assumption of a broad-band stochastic process input excitation. The process normally is modeled by filtered white or white noise. In addition, the choice of the triggering condition in RDT is closely related to data communication. In this project, research has been conducted to study the nonstationary white noise excitations as the input to verify the random decrement technique. A local extremum triggering condition is chosen and implemented for the purpose of minimum data communication in a RDT-based distributed computing strategy. Numerical simulation results show that the proposed technique is capable of minimizing the amount of data transmitted over the network with accuracy in modal parameters identification.

  16. Improved Power-Delay Trade-off in Wireless Networks Using Opportunistic Routing

    CERN Document Server

    Shin, Won-Yong; Lee, Yong H

    2009-01-01

    We study the benefits of opportunistic routing in wireless networks by examining how the power and delay scale as the number of source-destination (S-D) pairs in the network increases. The scaling behavior of conventional multi-hop transmission that does not employ opportunistic routing is also examined for comparison. Our results indicate that opportunistic routing can exhibit a better power--delay trade-off than that of conventional routing by providing up to a logarithmic boost in the scaling law. Such a gain is possible since the receivers can tolerate more interference due to the increased received signal power provided by the multi-user diversity (MUD) gain, which means having more simultaneous transmissions is possible. Computer simulations for both routing schemes are also performed, which show trends consistent with our analytical predictions.

  17. An Improved Energy-Efficient BBO-Based PEGASIS Protocol in Wireless Sensors Network

    Directory of Open Access Journals (Sweden)

    Bipandeep Singh

    2014-03-01

    Full Text Available The energy efficiency in the WSN is one of the very important Performance Indicator. Sensor network is a distributed event-based system that differs from traditional communication network. Sensor webs consisting of nodes with limited battery power and wireless communications are deployed to collect useful information from the field. PEGASIS (Power-Efficient Gathering in Sensor Information System is chain based protocol which is used to construct chain of sensor nodes. In the proposed work BBO is implemented along with PEGASIS to get the shortest chain for every round. Moreover to construct chain, energy of each sensor has been taken into account to bring a balance of energy consumption between nodes. Compared with PEGASIS, this PEG-BBO gives better results. Simulation results show that proposed protocol significantly prolongs the network lifetime.

  18. Improved Object Localization Using Accurate Distance Estimation in Wireless Multimedia Sensor Networks.

    Science.gov (United States)

    Ur Rehman, Yasar Abbas; Tariq, Muhammad; Khan, Omar Usman

    2015-01-01

    Object localization plays a key role in many popular applications of Wireless Multimedia Sensor Networks (WMSN) and as a result, it has acquired a significant status for the research community. A significant body of research performs this task without considering node orientation, object geometry and environmental variations. As a result, the localized object does not reflect the real world scenarios. In this paper, a novel object localization scheme for WMSN has been proposed that utilizes range free localization, computer vision, and principle component analysis based algorithms. The proposed approach provides the best possible approximation of distance between a wmsn sink and an object, and the orientation of the object using image based information. Simulation results report 99% efficiency and an error ratio of 0.01 (around 1 ft) when compared to other popular techniques.

  19. Unobtrusive Wireless Monitoring System for Assisted Living and Improving the Wellbeing of Elderly People

    Energy Technology Data Exchange (ETDEWEB)

    Browne, Aidan; Duncliffe, Richard; Spillane, James; Walsh, Colin; Hill, Martin; O' Mahony, Tom; O' Reilly, Fergus, E-mail: aidan.browne@mycit.ie, E-mail: duncliffe35@hotmail.com, E-mail: j.spillane@mycit.ie, E-mail: colin.walsh@arrisi.com, E-mail: Martin.Hill@cit.ie, E-mail: tom.omahony@cit.ie, E-mail: fergus.oreilly@cit.ie [Department of Electronic Engineering, Cork Institute of Technology, Rossa Avenue, Bishopstown, Cork (Ireland)

    2011-08-17

    A novel system to unobtrusively monitor the wellbeing of elderly people based on their activity patterns is presented. The system uses a wireless ZigBee network to monitor the electrical usage in a subject's home and then sends this data to an Apache server via HTTP from a GPRS unit. The data is logged in a MySQL database where pattern analysis is used to identify periods of significant inactivity. When such an event is identified designated contacts are notified by text message. For subjects requiring higher levels of monitoring a portable health monitor can be integrated incorporating a fall detector and panic button to inform of emergency situations.

  20. Toward of a highly integrated probe for improving wireless network quality

    Science.gov (United States)

    Ding, Fei; Song, Aiguo; Wu, Zhenyang; Pan, Zhiwen; You, Xiaohu

    2016-10-01

    Quality of service and customer perception is the focus of the telecommunications industry. This paper proposes a low-cost approach to the acquisition of terminal data, collected from LTE networks with the application of a soft probe, based on the Java language. The soft probe includes support for fast call in the form of a referenced library, and can be integrated into various Android-based applications to automatically monitor any exception event in the network. Soft probe-based acquisition of terminal data has the advantages of low cost and can be applied on large scale. Experiment shows that a soft probe can efficiently obtain terminal network data. With this method, the quality of service of LTE networks can be determined from acquired wireless data. This work contributes to efficient network optimization, and the analysis of abnormal network events.

  1. Powerplant productivity improvements and regulatory incentives

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, D; Brown, D

    1980-10-27

    The purpose of this study was to examine the benefits to be gained from increased powerplant productivity and to validate and demonstrate the use of incentives within the regulatory process to promote the improvement of powerplant productivity. The system-wide costs savings to be gained from given productivity improvement scenarios are estimated in both the short and long term. Numerous reports and studies exist which indicate that productivity improvements at the powerplant level are feasible and cost effective. The efforts of this study widen this focus and relate system-wide productivity improvements with system-wide cost savings. The initial thrust of the regulatory section of this study is to validate the existence of reasonable incentive procedures which would enable regulatory agencies to better motivate electric utilities to improve productivity on both the powerplant and system levels. The voluntary incentive format developed in this study was designed to facilitate the link between profit and efficiency which is typically not clear in most regulated market environments. It is concluded that at the present time, many electric utilities in this country could significantly increase the productivity of their base load units, and the adoption of an incentive program of the general type recommended in this study would add to rate of return regulation the needed financial incentives to enable utilities to make such improvements without losing long-run profit. In light of the upcoming oil import target levels and mandatory cutbacks of oil and gas as boiler fuels for electric utilities, the use of incentive programs to encourage more efficient utilization of coal and nuclear base load capacity will become far more inviting over the next two decades.

  2. Improving traffic flow at a 2-to-1 lane reduction with wirelessly connected, adaptive cruise control vehicles

    CERN Document Server

    Davis, L C

    2015-01-01

    Wirelessly connected vehicles that exchange information about traffic conditions can reduce delays caused by congestion. At a 2-to-1 lane reduction, the improvement in flow past a bottleneck due to traffic with a random mixture of 40% connected vehicles is found to be 52%. Control is based on connected-vehicle-reported velocities near the bottleneck. In response to indications of congestion the connected vehicles, which are also adaptive cruise control vehicles, reduce their speed in slowdown regions. Early lane changes of manually driven vehicles from the terminated lane to the continuous lane are induced by the slowing connected vehicles. Self-organized congestion at the bottleneck is thus delayed or eliminated, depending upon the incoming flow magnitude. For the large majority of vehicles, travel times past the bottleneck are substantially reduced. Control is responsible for delaying the onset of congestion as the incoming flow increases. Adaptive cruise control increases the flow out of the congested stat...

  3. Improving Temporal Coverage of an Energy-Efficient Data Extraction Algorithm for Environmental Monitoring Using Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Supriyo Chatterjea

    2009-06-01

    Full Text Available Collecting raw data from a wireless sensor network for environmental monitoring applications can be a difficult task due to the high energy consumption involved. This is especially difficult when the application requires specialized sensors that have very high energy consumption, e.g. hydrological sensors for monitoring marine environments. This paper introduces a technique for reducing energy consumption by minimizing sensor sampling operations. In addition, we illustrate how a randomized algorithm can be used to improve temporal coverage such that the time between the occurrence of an event and its detection can be minimized. We evaluate our approach using real data collected from a sensor network deployment on the Great Barrier Reef.

  4. Experience of wireless local area network in a radiation oncology department

    Directory of Open Access Journals (Sweden)

    Mandal Abhijit

    2010-01-01

    Full Text Available The aim of this work is to develop a wireless local area network (LAN between different types of users (Radiation Oncologists, Radiological Physicists, Radiation Technologists, etc for efficient patient data management and to made easy the availability of information (chair side to improve the quality of patient care in Radiation Oncology department. We have used mobile workstations (Laptops and stationary workstations, all equipped with wireless-fidelity (Wi-Fi access. Wireless standard 802.11g (as recommended by Institute of Electrical and Electronic Engineers (IEEE, Piscataway, NJ has been used. The wireless networking was configured with the Service Set Identifier (SSID, Media Access Control (MAC address filtering, and Wired Equivalent Privacy (WEP network securities. We are successfully using this wireless network in sharing the indigenously developed patient information management software. The proper selection of the hardware and the software combined with a secure wireless LAN setup will lead to a more efficient and productive radiation oncology department.

  5. Real-time network traffic classification technique for wireless local area networks based on compressed sensing

    Science.gov (United States)

    Balouchestani, Mohammadreza

    2017-05-01

    Network traffic or data traffic in a Wireless Local Area Network (WLAN) is the amount of network packets moving across a wireless network from each wireless node to another wireless node, which provide the load of sampling in a wireless network. WLAN's Network traffic is the main component for network traffic measurement, network traffic control and simulation. Traffic classification technique is an essential tool for improving the Quality of Service (QoS) in different wireless networks in the complex applications such as local area networks, wireless local area networks, wireless personal area networks, wireless metropolitan area networks, and wide area networks. Network traffic classification is also an essential component in the products for QoS control in different wireless network systems and applications. Classifying network traffic in a WLAN allows to see what kinds of traffic we have in each part of the network, organize the various kinds of network traffic in each path into different classes in each path, and generate network traffic matrix in order to Identify and organize network traffic which is an important key for improving the QoS feature. To achieve effective network traffic classification, Real-time Network Traffic Classification (RNTC) algorithm for WLANs based on Compressed Sensing (CS) is presented in this paper. The fundamental goal of this algorithm is to solve difficult wireless network management problems. The proposed architecture allows reducing False Detection Rate (FDR) to 25% and Packet Delay (PD) to 15 %. The proposed architecture is also increased 10 % accuracy of wireless transmission, which provides a good background for establishing high quality wireless local area networks.

  6. A Model to Improve the Quality Products

    OpenAIRE

    2010-01-01

    The topic of this paper is to present a solution who can improve product quality following the idea: “Unlike people who have verbal skills, machines use "sign language" to communicate what hurts or what has invaded their system’. Recognizing the "signs" or symptoms that the machine conveys is a required skill for those who work with machines and are responsible for their care and feeding. The acoustic behavior of technical products is predominantly defined in the design stage, although the ac...

  7. From sensor output to improved product quality

    NARCIS (Netherlands)

    Hertog, M.L.A.T.M.; Vollebregt, Martijntje; Unzueta, I.; Hoofman, R.J.O.M.; Lammertyn, J.

    2015-01-01

    The research conducted in the European PASTEUR project focussed on perishables monitoring through smart tracking of lifetime and quality. The aim was to develop a wireless sensor platform to monitor the environmental conditions of perishable goods in the supply chain between producer and consumer

  8. From sensor output to improved product quality

    NARCIS (Netherlands)

    Hertog, M.L.A.T.M.; Vollebregt, Martijntje; Unzueta, I.; Hoofman, R.J.O.M.; Lammertyn, J.

    2015-01-01

    The research conducted in the European PASTEUR project focussed on perishables monitoring through smart tracking of lifetime and quality. The aim was to develop a wireless sensor platform to monitor the environmental conditions of perishable goods in the supply chain between producer and consumer

  9. Oil Products Quality Improvement by Adsorption Method

    Directory of Open Access Journals (Sweden)

    Kulash K. Syrmanova

    2017-02-01

    Full Text Available Petroleum takes the leading place in fuel and energy sector. It is a basis of fuel and energy balance of advanced countries economics. Light oil proven reserves reducing is a general trend of modern oil industry development. Almost the entire increase in reserves is due to viscous heavy sour oil [1-2]. Nowadays quality of the most important oil products is a crucial problem in refinery industry. The problem of oil products quality is connected with their using and operation in engines and machines. Requirements increasing to stability and effective technics maintenance leads to oil products running abilities significant hardening. In order to protect the environment, the task to obtain oil products with improved environmental properties was assigned. Properties of the oil determine the direction and condition of its processing and directly affect the quality of the oil products [3-4].

  10. BER IMPROVEMENT OF WIRELESS LAN IEEE 802.11 STANDARD USING WAVELET PACKET TRANSFORMS

    Directory of Open Access Journals (Sweden)

    Sanjeev Kumar

    2012-09-01

    Full Text Available High data rates and spectral efficiency is the main requirements for wireless communication systems. Orthogonal Frequency Division Multiplexing (OFDM is a special form of multi carrier transmission used to achieve high data rates of the various WLAN standards. WLAN uses an Inverse Fast Fourier Transform (IFFT at the transmitter to modulate a high bit-rate signal onto a number of carriers and ensure orthogonality between the carriers. The FFT-OFDM has a disadvantage that it is inherently inflexible and requires a complex IFFT core. Recently, Wavelet Packet Transform is proposed as an alternate to FFT. It is a multiplexing method in which data is assigned to wavelet sub bands having different time and frequency resolutions. This paper presents a BER analysis of Fourier-based OFDM (FFT-OFDM and Wavelet Packet based OFDM (WPT-OFDM in WLAN standard (IEEE 802.11a. The performance of FFT and WPT OFDM for various modulation techniques such as PSK, DPSK and QAM for varying values of M was evaluated in AWGN Channel.

  11. Software Defined Networking for Improved Wireless Sensor Network Management: A Survey

    Science.gov (United States)

    Ndiaye, Musa; Hancke, Gerhard P.; Abu-Mahfouz, Adnan M.

    2017-01-01

    Wireless sensor networks (WSNs) are becoming increasingly popular with the advent of the Internet of things (IoT). Various real-world applications of WSNs such as in smart grids, smart farming and smart health would require a potential deployment of thousands or maybe hundreds of thousands of sensor nodes/actuators. To ensure proper working order and network efficiency of such a network of sensor nodes, an effective WSN management system has to be integrated. However, the inherent challenges of WSNs such as sensor/actuator heterogeneity, application dependency and resource constraints have led to challenges in implementing effective traditional WSN management. This difficulty in management increases as the WSN becomes larger. Software Defined Networking (SDN) provides a promising solution in flexible management WSNs by allowing the separation of the control logic from the sensor nodes/actuators. The advantage with this SDN-based management in WSNs is that it enables centralized control of the entire WSN making it simpler to deploy network-wide management protocols and applications on demand. This paper highlights some of the recent work on traditional WSN management in brief and reviews SDN-based management techniques for WSNs in greater detail while drawing attention to the advantages that SDN brings to traditional WSN management. This paper also investigates open research challenges in coming up with mechanisms for flexible and easier SDN-based WSN configuration and management. PMID:28471390

  12. Software Defined Networking for Improved Wireless Sensor Network Management: A Survey.

    Science.gov (United States)

    Ndiaye, Musa; Hancke, Gerhard P; Abu-Mahfouz, Adnan M

    2017-05-04

    Wireless sensor networks (WSNs) are becoming increasingly popular with the advent of the Internet of things (IoT). Various real-world applications of WSNs such as in smart grids, smart farming and smart health would require a potential deployment of thousands or maybe hundreds of thousands of sensor nodes/actuators. To ensure proper working order and network efficiency of such a network of sensor nodes, an effective WSN management system has to be integrated. However, the inherent challenges of WSNs such as sensor/actuator heterogeneity, application dependency and resource constraints have led to challenges in implementing effective traditional WSN management. This difficulty in management increases as the WSN becomes larger. Software Defined Networking (SDN) provides a promising solution in flexible management WSNs by allowing the separation of the control logic from the sensor nodes/actuators. The advantage with this SDN-based management in WSNs is that it enables centralized control of the entire WSN making it simpler to deploy network-wide management protocols and applications on demand. This paper highlights some of the recent work on traditional WSN management in brief and reviews SDN-based management techniques for WSNs in greater detail while drawing attention to the advantages that SDN brings to traditional WSN management. This paper also investigates open research challenges in coming up with mechanisms for flexible and easier SDN-based WSN configuration and management.

  13. Software Defined Networking for Improved Wireless Sensor Network Management: A Survey

    Directory of Open Access Journals (Sweden)

    Musa Ndiaye

    2017-05-01

    Full Text Available Wireless sensor networks (WSNs are becoming increasingly popular with the advent of the Internet of things (IoT. Various real-world applications of WSNs such as in smart grids, smart farming and smart health would require a potential deployment of thousands or maybe hundreds of thousands of sensor nodes/actuators. To ensure proper working order and network efficiency of such a network of sensor nodes, an effective WSN management system has to be integrated. However, the inherent challenges of WSNs such as sensor/actuator heterogeneity, application dependency and resource constraints have led to challenges in implementing effective traditional WSN management. This difficulty in management increases as the WSN becomes larger. Software Defined Networking (SDN provides a promising solution in flexible management WSNs by allowing the separation of the control logic from the sensor nodes/actuators. The advantage with this SDN-based management in WSNs is that it enables centralized control of the entire WSN making it simpler to deploy network-wide management protocols and applications on demand. This paper highlights some of the recent work on traditional WSN management in brief and reviews SDN-based management techniques for WSNs in greater detail while drawing attention to the advantages that SDN brings to traditional WSN management. This paper also investigates open research challenges in coming up with mechanisms for flexible and easier SDN-based WSN configuration and management.

  14. Distributed beamforming designs to improve physical layer security in wireless relay networks

    Science.gov (United States)

    Qian, Mujun; Liu, Chen; Fu, Youhua

    2014-12-01

    This paper investigates security-oriented beamforming designs in a relay network composed of a source-destination pair, multiple relays, and a passive eavesdropper. Unlike most of the earlier works, we assume that only statistical information of the relay-eavesdropper channels is known to the relays. We propose beamforming solutions for amplify-and-forward (AF) and decode-and-forward (DF) relay networks to improve secrecy capacity. In an AF network, the beamforming design is obtained by approximating a product of two correlated Rayleigh quotients to a single Rayleigh quotient using the Taylor series expansion. Our study reveals that in an AF network, the secrecy capacity does not always grow as the eavesdropper moves away from the relays or as total relay transmit power increases. Moreover, if the destination is nearer to the relays than the eavesdropper is, a suboptimal power is derived in closed form through monotonicity analysis of secrecy capacity. While in a DF network, secrecy capacity is a single Rayleigh quotient problem which can be easily solved. We also found that if the relay-eavesdropper distances are about the same, it is unnecessary to consider the eavesdropper in a DF network. Numerical results show that for either AF or DF relaying protocol, the proposed beamforming scheme provides higher secrecy capacity than traditional approaches.

  15. A New Cooperative MIMO Scheme Based on SM for Energy-Efficiency Improvement in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Yuyang Peng

    2014-01-01

    Full Text Available Improving the energy efficiency in wireless sensor networks (WSN has attracted considerable attention nowadays. The multiple-input multiple-output (MIMO technique has been proved as a good candidate for improving the energy efficiency, but it may not be feasible in WSN which is due to the size limitation of the sensor node. As a solution, the cooperative multiple-input multiple-output (CMIMO technique overcomes this constraint and shows a dramatically good performance. In this paper, a new CMIMO scheme based on the spatial modulation (SM technique named CMIMO-SM is proposed for energy-efficiency improvement. We first establish the system model of CMIMO-SM. Based on this model, the transmission approach is introduced graphically. In order to evaluate the performance of the proposed scheme, a detailed analysis in terms of energy consumption per bit of the proposed scheme compared with the conventional CMIMO is presented. Later, under the guide of this new scheme we extend our proposed CMIMO-SM to a multihop clustered WSN for further achieving energy efficiency by finding an optimal hop-length. Equidistant hop as the traditional scheme will be compared in this paper. Results from the simulations and numerical experiments indicate that by the use of the proposed scheme, significant savings in terms of total energy consumption can be achieved. Combining the proposed scheme with monitoring sensor node will provide a good performance in arbitrary deployed WSN such as forest fire detection system.

  16. A new cooperative MIMO scheme based on SM for energy-efficiency improvement in wireless sensor network.

    Science.gov (United States)

    Peng, Yuyang; Choi, Jaeho

    2014-01-01

    Improving the energy efficiency in wireless sensor networks (WSN) has attracted considerable attention nowadays. The multiple-input multiple-output (MIMO) technique has been proved as a good candidate for improving the energy efficiency, but it may not be feasible in WSN which is due to the size limitation of the sensor node. As a solution, the cooperative multiple-input multiple-output (CMIMO) technique overcomes this constraint and shows a dramatically good performance. In this paper, a new CMIMO scheme based on the spatial modulation (SM) technique named CMIMO-SM is proposed for energy-efficiency improvement. We first establish the system model of CMIMO-SM. Based on this model, the transmission approach is introduced graphically. In order to evaluate the performance of the proposed scheme, a detailed analysis in terms of energy consumption per bit of the proposed scheme compared with the conventional CMIMO is presented. Later, under the guide of this new scheme we extend our proposed CMIMO-SM to a multihop clustered WSN for further achieving energy efficiency by finding an optimal hop-length. Equidistant hop as the traditional scheme will be compared in this paper. Results from the simulations and numerical experiments indicate that by the use of the proposed scheme, significant savings in terms of total energy consumption can be achieved. Combining the proposed scheme with monitoring sensor node will provide a good performance in arbitrary deployed WSN such as forest fire detection system.

  17. The wireless internet explained

    CERN Document Server

    Rhoton, John

    2001-01-01

    The Wireless Internet Explained covers the full spectrum of wireless technologies from a wide range of vendors, including initiatives by Microsoft and Compaq. The Wireless Internet Explained takes a practical look at wireless technology. Rhoton explains the concepts behind the physics, and provides an overview that clarifies the convoluted set of standards heaped together under the umbrella of wireless. It then expands on these technical foundations to give a panorama of the increasingly crowded landscape of wireless product offerings. When it comes to actual implementation the book gives abundant down-to-earth advice on topics ranging from the selection and deployment of mobile devices to the extremely sensitive subject of security.Written by an expert on Internet messaging, the author of Digital Press''s successful Programmer''s Guide to Internet Mail and X.400 and SMTP: Battle of the E-mail Protocols, The Wireless Internet Explained describes and evaluates the current state of the fast-growing and crucial...

  18. Simulation Study of a Vehicle Production Line for Productivity Improvement

    Directory of Open Access Journals (Sweden)

    M.F.F. Ab Rashid

    2015-06-01

    Full Text Available This paper presents the study of a motorcycle frame production line in a particular company in Malaysia. Due to the high demand, the company needs to increase its production by at least 12% compared with current output. In order to improve productivity, the production-floor data was collected and simulated using the discrete event simulation approach. Later, a number of suggestions for improvement were simulated to identify the effect of the suggestions on productivity. In addition, cost analysis was also undertaken to identify the profit margin for a particular period of time for each suggestion. Simulation results indicate that there are three suggestions that are able to fulfill the 12% volume increment. In the short term, the suggestion to hire an assistant line leader will give instant effect to the profit. Meanwhile, for the medium term, Poka-yoke will give higher profit compared with the others, while in the long term, SOP (standard operating procedure implementation will yield a better profit margin. In future, the simulation of a dynamic demand model for this product is suggested to cope with new trends in the market.

  19. Software productivity improvement through software engineering technology

    Science.gov (United States)

    Mcgarry, F. E.

    1985-01-01

    It has been estimated that NASA expends anywhere from 6 to 10 percent of its annual budget on the acquisition, implementation and maintenance of computer software. Although researchers have produced numerous software engineering approaches over the past 5-10 years; each claiming to be more effective than the other, there is very limited quantitative information verifying the measurable impact htat any of these technologies may have in a production environment. At NASA/GSFC, an extended research effort aimed at identifying and measuring software techniques that favorably impact productivity of software development, has been active over the past 8 years. Specific, measurable, software development technologies have been applied and measured in a production environment. Resulting software development approaches have been shown to be effective in both improving quality as well as productivity in this one environment.

  20. Improving Packet Delivery Performance of Publish/Subscribe Protocols in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Ernesto García Davis

    2013-01-01

    Full Text Available MQTT-S and CoAP are two protocols able to use the publish/subscribe model in Wireless Sensor Networks (WSNs. The high scalability provided by the publish/subscribe model may incur a high packet loss and therefore requires an efficient reliability mechanism to cope with this situation. The reliability mechanism of MQTT-S and CoAP employs a method which defines a fixed value for the retransmission timeout (RTO. This article argues that this method is not efficient for deploying publish/subscribe in WSN, because it may be unable to recover a packet, therefore resulting in a lower packet delivery ratio (PDR at the subscriber nodes. This article proposes and evaluates an adaptive RTO method, which consists in using a Smooth Round-trip Time and multiplying it by a constant parameter (K. Thanks to this method, the reliability mechanism of MQTT-S and CoAP would be able to react properly to packet loss and would also be lightweight in terms of energy, memory and computing for sensor nodes where these resources are critical. We present a detailed evaluation of the effects of the K value on the calculation of the adaptive RTO method. We also establish the setting for obtaining the highest PDR on the subscriber nodes for single-hop and multi-hop scenarios. The results for single-hop scenario show that use of the appropriate K value for the adaptive RTO method increases the PDR up to 76% for MQTT-S and up to 38% for CoAP when compared with the use of fixed RTO method for both protocols, respectively. Meanwhile the same comparison for multi-hop scenario, the adaptive RTO method increases the PDR up to 36% for MQTT-S and up to 14% for CoAP.

  1. Improving packet delivery performance of publish/subscribe protocols in wireless sensor networks.

    Science.gov (United States)

    Davis, Ernesto García; Calveras, Anna; Demirkol, Ilker

    2013-01-04

    MQTT-S and CoAP are two protocols able to use the publish/subscribe model in Wireless Sensor Networks (WSNs). The high scalability provided by the publish/subscribe model may incur a high packet loss and therefore requires an efficient reliability mechanism to cope with this situation. The reliability mechanism of MQTT-S and CoAP employs a method which defines a fixed value for the retransmission timeout (RTO). This article argues that this method is not efficient for deploying publish/subscribe in WSN, because it may be unable to recover a packet, therefore resulting in a lower packet delivery ratio (PDR) at the subscriber nodes. This article proposes and evaluates an adaptive RTO method, which consists in using a Smooth Round-trip Time and multiplying it by a constant parameter (K). Thanks to this method, the reliability mechanism of MQTT-S and CoAP would be able to react properly to packet loss and would also be lightweight in terms of energy, memory and computing for sensor nodes where these resources are critical. We present a detailed evaluation of the effects of the K value on the calculation of the adaptive RTO method. We also establish the setting for obtaining the highest PDR on the subscriber nodes for single-hop and multi-hop scenarios. The results for single-hop scenario show that use of the appropriate K value for the adaptive RTO method increases the PDR up to 76% for MQTT-S and up to 38% for CoAP when compared with the use of fixed RTO method for both protocols, respectively. Meanwhile the same comparison for multi-hop scenario, the adaptive RTO method increases the PDR up to 36% for MQTT-S and up to 14% for CoAP.

  2. Improving Packet Delivery Performance of Publish/Subscribe Protocols in Wireless Sensor Networks

    Science.gov (United States)

    Davis, Ernesto García; Calveras, Anna; Demirkol, Ilker

    2013-01-01

    MQTT-S and CoAP are two protocols able to use the publish/subscribe model in Wireless Sensor Networks (WSNs). The high scalability provided by the publish/subscribe model may incur a high packet loss and therefore requires an efficient reliability mechanism to cope with this situation. The reliability mechanism of MQTT-S and CoAP employs a method which defines a fixed value for the retransmission timeout (RTO). This article argues that this method is not efficient for deploying publish/subscribe in WSN, because it may be unable to recover a packet, therefore resulting in a lower packet delivery ratio (PDR) at the subscriber nodes. This article proposes and evaluates an adaptive RTO method, which consists in using a Smooth Round-trip Time and multiplying it by a constant parameter (K). Thanks to this method, the reliability mechanism of MQTT-S and CoAP would be able to react properly to packet loss and would also be lightweight in terms of energy, memory and computing for sensor nodes where these resources are critical. We present a detailed evaluation of the effects of the K value on the calculation of the adaptive RTO method. We also establish the setting for obtaining the highest PDR on the subscriber nodes for single-hop and multi-hop scenarios. The results for single-hop scenario show that use of the appropriate K value for the adaptive RTO method increases the PDR up to 76% for MQTT-S and up to 38% for CoAP when compared with the use of fixed RTO method for both protocols, respectively. Meanwhile the same comparison for multi-hop scenario, the adaptive RTO method increases the PDR up to 36% for MQTT-S and up to 14% for CoAP. PMID:23291579

  3. New algorithm for integration between wireless microwave sensor network and radar for improved rainfall measurement and mapping

    Directory of Open Access Journals (Sweden)

    Y. Liberman

    2014-05-01

    Full Text Available One of the main challenges for meteorological and hydrological modelling is accurate rainfall measurement and mapping across time and space. To date the most effective methods for large scale rainfall estimates are radar, satellites, and more recently, received signal level (RSL measurements received from commercial microwave networks (CMN. While these methods provide improved spatial resolution over traditional rain gauges, these have their limitations as well. For example, the wireless CMN, which are comprised of microwave links (ML, are dependant upon existing infrastructure, and the ML arbitrary distribution in space. Radar, on the other hand, is known in its limitation in accurately estimating rainfall in urban regions, clutter areas and distant locations. In this paper the pros and cons of the radar and ML methods are considered in order to develop a new algorithm for improving rain fall measurement and mapping, which is based on data fusion of the different sources. The integration is based on an optimal weighted average of the two data sets, taking into account location, number of links, rainfall intensity and time step. Our results indicate that by using the proposed new method we not only generate a more accurate 2-D rainfall reconstructions, compared with actual rain intensities in space, but also the reconstructed maps are extended to the maximum coverage area. By inspecting three significant rain events, we show an improvement of rain rate estimation over CMN or radar alone, almost uniformly, both for instantaneous spatial measurements, as well as in calculating total accumulated rainfall. These new improved 2-D rainfall maps, and the accurate rainfall measurements over large areas at sub-hourly time scales, will allow for improved understanding, initialization and calibration of hydrological and meteorological models necessary, mainly, for water resource management and planning.

  4. Applying Triz for Production Quality Improvement

    Directory of Open Access Journals (Sweden)

    Swee Nikalus Shu Luing

    2017-01-01

    Full Text Available This paper aims to provide a thorough analysis on the application of TRIZ in improving the quality of canned food production. TRIZ tools such as engineering systems analysis, function analysis, cause and effect chain analysis, By-separation model and 40 Inventive Principles are applied in order to discover some feasible and elegant solutions to alleviate the problem. Findings revealed that the rejected canned products on the conveyor belt will be isolated or picked up with other good condition canned products which are lined up very closely to the rejected cans; though the visioning system is able detect the fault printing on the canned product. The main root cause is that the rejected canned product is picked up with other canned products in good condition because all cans are lined up on the belt and are very close to each other or having no gaps between the cans. Conversely, all cans on the conveyor belts are required to be very close to each other to avoid collisions that may damage the cans. The root cause is solved by applying function analysis, By-separation tool and Inventive Principles. Therefore, it can be concluded that TRIZ is a powerful tool in inventive problem solving.

  5. Environmental improvement through product development - in Japanese

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Bey, Niki

    and aid the establishment of such a new agenda. We place our focus on how products and services can be designed so not to harm humans, the environment and nature. With this Guide to environmental improvement through product development, we take the first step in this collaboration. The Guide gives......Companies in Denmark and abroad are working increasingly to reduce human impacts on the environment and nature. At the same time there must still be a large focus on the creation of value for customers and consumers. This development gives rise to a huge potential for Danish companies, to create...... new business opportunities, where sustainable development and value creation are integrated early in the design of new products and services. There is a great opportunity for businesses to create a new and positive agenda, where the focus is on all the good that companies can do for the environment...

  6. The Science of Wireless Sensor Networks: Improving engineered systems through scientific analysis

    Science.gov (United States)

    Kerkez, B.; Meadows, M.; Glaser, S. D.; Bales, R. C.

    2009-12-01

    We assessed the effects of environmental factors on the performance of a wireless sensor network in a remote mountain environment in the Sierra Nevada of California. The deployment of these networks for environmental monitoring applications, although in its relative infancy, is bound to become ubiquitous as a means of large-scale data aggregation and real-time data analysis. The knowledge gained from our study will allow scientists and engineers to design cognitive, self-optimizing, networks, which are capable of interacting with sensed data to respond to changes in the environment by intelligently selecting channel frequencies and data routing algorithms. Our testbed is located in the Southern Sierra Critical Zone Observatory, which is co-located with the Kings River Experimental Watersheds at an elevation of about 2,000m. The site receives a mix of snow and rain during the cold season. Site conditions range from heavily wooded areas to open, marshy meadows. Average spacing between the nodes was 50m, with some spans exceeding 100m. Network statistics show diurnal fluctuation in performance, most probably related to variations in absolute humidity. This is a serious issue for all low-power, high-frequency radio transmission. One way to quantify network link quality is the average packet delivery ratio. In-air water concentrations of 14mmol/mol (measured 50m above ground) corresponded to the dropping of 60% of all packets transmitted, while concentrations of 8mmol/mol saw only 5% of packets requiring retransmission. This corresponds to system latency values - the time delay of messages traveling through the system - ranging from 0.4s to 20s, with an average 5s. The average received signal strength indicator (RSSI) values between nodes measured -58dBm, ranging from -28dBm to -90dBm, where low RSSI corresponded to a larger distance between nodes. Note that a value of -80dBm and below is considered unacceptable, while a deployment in a large indoor space showed average

  7. Wireless Sensors and Networks for Advanced Energy Management

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, J.E.

    2005-05-06

    Numerous national studies and working groups have identified low-cost, very low-power wireless sensors and networks as a critical enabling technology for increasing energy efficiency, reducing waste, and optimizing processes. Research areas for developing such sensor and network platforms include microsensor arrays, ultra-low power electronics and signal conditioning, data/control transceivers, and robust wireless networks. A review of some of the research in the following areas will be discussed: (1) Low-cost, flexible multi-sensor array platforms (CO{sub 2}, NO{sub x}, CO, humidity, NH{sub 3}, O{sub 2}, occupancy, etc.) that enable energy and emission reductions in applications such as buildings and manufacturing; (2) Modeling investments (energy usage and savings to drive capital investment decisions) and estimated uptime improvements through pervasive gathering of equipment and process health data and its effects on energy; (3) Robust, self-configuring wireless sensor networks for energy management; and (4) Quality-of-service for secure and reliable data transmission from widely distributed sensors. Wireless communications is poised to support technical innovations in the industrial community, with widespread use of wireless sensors forecasted to improve manufacturing production and energy efficiency and reduce emissions. Progress being made in wireless system components, as described in this paper, is helping bring these projected improvements to reality.

  8. New algorithm for integration between wireless microwave sensor network and radar for improved rainfall measurement and mapping

    Science.gov (United States)

    Liberman, Y.; Samuels, R.; Alpert, P.; Messer, H.

    2014-10-01

    One of the main challenges for meteorological and hydrological modelling is accurate rainfall measurement and mapping across time and space. To date, the most effective methods for large-scale rainfall estimates are radar, satellites, and, more recently, received signal level (RSL) measurements derived from commercial microwave networks (CMNs). While these methods provide improved spatial resolution over traditional rain gauges, they have their limitations as well. For example, wireless CMNs, which are comprised of microwave links (ML), are dependant upon existing infrastructure and the ML' arbitrary distribution in space. Radar, on the other hand, is known in its limitation for accurately estimating rainfall in urban regions, clutter areas and distant locations. In this paper the pros and cons of the radar and ML methods are considered in order to develop a new algorithm for improving rainfall measurement and mapping, which is based on data fusion of the different sources. The integration is based on an optimal weighted average of the two data sets, taking into account location, number of links, rainfall intensity and time step. Our results indicate that, by using the proposed new method, we not only generate more accurate 2-D rainfall reconstructions, compared with actual rain intensities in space, but also the reconstructed maps are extended to the maximum coverage area. By inspecting three significant rain events, we show that our method outperforms CMNs or the radar alone in rain rate estimation, almost uniformly, both for instantaneous spatial measurements, as well as in calculating total accumulated rainfall. These new improved 2-D rainfall maps, as well as the accurate rainfall measurements over large areas at sub-hourly timescales, will allow for improved understanding, initialization, and calibration of hydrological and meteorological models mainly necessary for water resource management and planning.

  9. Improving mathematics teaching and learning experiences for hard of hearing students with wireless technology-enhanced classrooms.

    Science.gov (United States)

    Liu, Chen-Chung; Chou, Chien-Chia; Liu, Baw-Jhiune; Yang, Jui-Wen

    2006-01-01

    Hard of hearing students usually face more difficulties at school than other students. A classroom environment with wireless technology was implemented to explore whether wireless technology could enhance mathematics learning and teaching activities for a hearing teacher and her 7 hard of hearing students in a Taiwan junior high school. Experiments showed that the highly interactive communication through the wireless network increased student participation in learning activities. Students demonstrated more responses to the teacher and fewer distraction behaviors. Fewer mistakes were made in in-class course work because Tablet PCs provided students scaffolds. Students stated that the environment with wireless technology was desirable and said that they hoped to continue using the environment to learn mathematics.

  10. Wireless Networks

    OpenAIRE

    Samaka, Mohammed; Khan, Khaled M.D.

    2007-01-01

    Wireless communication is the fastest-growing field in the telecommunication industry. Wireless networks have grown significantly as an important segment of the communications industry. They have become popular networks with the potential to provide high-speed, high-quality information exchange between two or more portable devices without any wire or conductors. Wireless networks can simply be characterized as the technology that provides seamless access to information, anywhere, anyplace, an...

  11. Wireless virtualization

    CERN Document Server

    Wen, Heming; Le-Ngoc, Tho

    2013-01-01

    This SpringerBriefs is an overview of the emerging field of wireless access and mobile network virtualization. It provides a clear and relevant picture of the current virtualization trends in wireless technologies by summarizing and comparing different architectures, techniques and technologies applicable to a future virtualized wireless network infrastructure. The readers are exposed to a short walkthrough of the future Internet initiative and network virtualization technologies in order to understand the potential role of wireless virtualization in the broader context of next-generation ubiq

  12. Direct fuel cell product design improvement

    Energy Technology Data Exchange (ETDEWEB)

    Maru, H.C.; Farooque, M. [Energy Research Corp., Danbury, CT (United States)

    1996-12-31

    Significant milestones have been attained towards the technology development field testing and commercialization of direct fuel cell power plant since the 1994 Fuel Cell Seminar. Under a 5-year cooperative agreement with the Department of Energy signed in December 1994, Energy Research Corporation (ERC) has been developing the design for a MW-scale direct fuel cell power plant with input from previous technology efforts and the Santa Clara Demonstration Project. The effort encompasses product definition in consultation with the Fuel Cell Commercialization Group, potential customers, as well as extensive system design and packaging. Manufacturing process improvements, test facility construction, cell component scale up, performance and endurance improvements, stack engineering, and critical balance-of-plant development are also addressed. Major emphasis of this product design improvement project is on increased efficiency, compactness and cost reduction to establish a competitive place in the market. A 2.85 MW power plant with an efficiency of 58% and a footprint of 420 m{sup 2} has been designed. Component and subsystem testing is being conducted at various levels. Planning and preparation for verification of a full size prototype unit are in progress. This paper presents the results obtained since the last fuel cell seminar.

  13. Electronic Devices, Methods, and Computer Program Products for Selecting an Antenna Element Based on a Wireless Communication Performance Criterion

    DEFF Research Database (Denmark)

    2014-01-01

    A method of operating an electronic device includes providing a plurality of antenna elements, evaluating a wireless communication performance criterion to obtain a performance evaluation, and assigning a first one of the plurality of antenna elements to a main wireless signal reception...

  14. Improving smallholder livelihoods: Dairy production in Tanzania

    Directory of Open Access Journals (Sweden)

    Edward Ulicky

    2013-12-01

    Full Text Available Tanzania is primarily an agro-based economy, characterized by subsistence agricultural production that employs more than 80% of the population and contributes up to 45% of the GDP (2005. This country is endowed with a cattle population of 21.3 M, composed mainly of indigenous Zebu breeds and about 680 000 improved dairy animals. About 70% of the milk produced comes from the traditional sector (indigenous cattle kept in rural areas, while the remaining 30% comes from improved cattle, mainly kept by smallholder producers. In Northern Tanzania and particularly in Hai district of Kilimanjaro Region, some dairy farmers organize themselves into small producer groups for the purpose of milk collecting, marketing and general promotion of the dairy sector in their community. Nronga Women Dairy Cooperative Society (NWDCS Limited is one of such organizations dedicated to improve the well-being of the Nronga village community through promoting small-scale dairy farming and its flow-on benefits. Milk flows out of the village, and services for investment and dairy production flow into the village, ensuring a sustainable financial circulation necessary for poverty reduction, rural development and better life for the rural community. In 2001 NWDCS introduced a school milk feeding program that has attracted Australian donors since 2005. Guided by Global Development Group, a multi-faceted project, integrating micro-enterprises, business, education and child health/nutrition, was proposed and initiated by building a dairy plant in Hai District headquarters, the Boma plant. In March 2013, the Australian High Commission to East Africa approved Direct Aid Program funding of AUD 30 000 towards the NWDCS - Biogas Pilot Project in Tanzania, which included the renovation of zero-grazing cow shade units, the construction of 6-m3 biodigester plants on each farm, and encouragement of the use of bioslurry for pasture production and home gardens.

  15. An Improved Trusted Greedy Perimeter Stateless Routing for Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    P. Raghu Vamsi

    2014-10-01

    Full Text Available In this paper, an improvement over Trusted Greedy Perimeter Stateless Routing (T-GPSR is presented. T-GPSR employs heuristic weight values to evaluate total trust value of neighboring nodes. However, heuristic assignment of weights provide flexibility but it is not suitable in presence of several security attacks such as Grey hole, selfish behavior, on-off attack etc., are launched in the network in different proportions. To overcome this limitation, an improvement is suggested with an emphasis on trust update, lightweight trust computation and storage to reduce communication and storage overhead. The simulation study indicates that the packet delivery ratio of the improved T-GPSR has improved by 10% over T-GPSR in the presence of 50% of malicious nodes in the network.

  16. An Improved DY-Hop Localization Algorithm with Reduced Node Location Error for Wireless Sensor Networks

    Science.gov (United States)

    Chen, Hongyang; Sezaki, Kaoru; Deng, Ping; So, Hing Cheung

    In this paper, we propose a new localization algorithm and improve the DV-Hop algorithm by using a differential error correction scheme that is designed to reduce the location error accumulated over multiple hops. This scheme needs no additional hardware support and can be implemented in a distributed way. The proposed method can improve location accuracy without increasing communication traffic and computing complexity. Simulation results show the performance of the proposed algorithm is superior to that of the DV-Hop algorithm.

  17. TPM- A KEY STRATEGY FOR PRODUCTIVITY IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    J.S. DUREJA

    2011-02-01

    Full Text Available During high growth era companies are making technical progress in automation and centralization of the plants, which needs large amount of manual work to maintain the automation systems. The strategy of maintaining the equipment of a plant is crucial for the effectiveness of manufacturing. Total productive maintenance (TPM is a maintenance program, which involves concepts for maintaining plant and equipments effectively. In this paper detailed implementation of TPM in the cold rolling plant is discussed. Results achieved are quite encouraging in terms of motivated employees, improvement in overall equipment effectiveness (OEE and reduction in no. of accidents on shop floor.

  18. From early wireless to Everest.

    Science.gov (United States)

    Allen, A

    1998-01-01

    Medical information has been transmitted using wireless technologies for almost 80 years. A "wired wireless" electronic stethoscope was developed by the U.S. Army Signal Corps in the early 1920's, for potential use in ship-to-shore transmission of cardiac sounds. [Winters SR. Diagnosis by wireless. Scientific American June 11, 1921, p. 465] Today, wireless is used in a wide range of medical applications and at sites from transoceanic air flights to offshore oil platforms to Mt. Everest. 'Wireless LANs' are often used in medical environments. Typically, nurses and physicians in a hospital or clinic use hand-held "wireless thin client" pen computers that exchange patient information and images with the hospital server. Numerous companies, such as Fujitsu (article below) and Cruise Technologies (www.cruisetech.com) manufacture handheld pen-entry computers. One company, LXE, integrates radio-frequency (RF) enhanced hand-held computers specifically designed for production use within a wireless LAN (www.lxe.com). Other companies (Proxim, Symbol, and others) supply the wireless RF LAN infrastructure for the enterprise. Unfortunately, there have been problems with widespread deployment of wireless LANs. Perhaps the biggest impediment has been the lack of standards. Although an international standard (IEEE 802.11) was adopted in 1997, most wireless LAN products still are not compatible with the equipment of competing companies. A problem with the current standard for LAN adapters is that throughput is limited to 3 Mbps--compared to at least 10 Mbps, and often 100 Mbps, in a hard-wired Ethernet LAN. An II Mbps standard is due out in the next year or so, but it will be at least 2 years before standards-compliant products are available. This story profiles some of the ways that wireless is being used to overcome gaps in terrestrial and within-enterprise communication.

  19. Molten carbonate fuel cell product design improvement

    Energy Technology Data Exchange (ETDEWEB)

    P. Voyentzie; T. Leo; A. Kush; L. Christner; G. Carlson; C. Yuh

    1998-12-20

    Drawing on the manufacture, field test, and post-test experience of the sixteen Santa Clara Demonstration Project (SCDP) stacks, ERC is finalizing the next generation commercial entry product design. The second generation cells are 50% larger in area, 40% lighter on equal geometric area basis, and 30% thinner than the earlier design. These improvements have resulted in doubling of the full-height stack power. A low-cost and high-strength matrix has also been developed for improving product ruggedness. The low-cost advanced cell design incorporating these improvements has been refined through six short stack tests. Power production per cell of two times the SCDP maximum power operation, over ten thermal cycles, and overall operating flexibility with respect to load and thermal changes have been demonstrated in these short stack tests. An internally insulated stack enclosure has been designed and fabricated to eliminate the need for an inert gas environment during operation. ERC has acquired the capability for testing 400kW full-height direct fuel ceil (DFC) stack and balance-of-plant equipment. With the readiness of the power plant test facility, the cell package design, and the stack module, full-height stack testing has begun. The first full- height stack incorporating the post-SCDP second generation design was completed. The stack reached a power level of 253 kW, setting a world record for the highest power production from the advanced fuel cell system. Excellent performance uniformity at this power level affirmed manufacturing reproducibility of the components at the factory. This unoptimized small size test has achieved pipeline natural gas to DC electricity conversion efficiency of 47% (based on lower heating value - LHV) including the parasitic power consumed by the BOP equipment; that should translate to more than 50% efficiency in commercial operation, before employing cogeneration. The power plant system also operated smoothly. With the success of this

  20. Wireless Internet

    NARCIS (Netherlands)

    el Zarki, M.; Heijenk, Geert; Lee, Kenneth S.; Bidgoli, H.

    This chapter addresses the topic of wireless Internet, the extension of the wireline Internet architecture to the wireless domain. As such the chapter introduces the reader to the dominant characteristics of the Internet, from its structure to the protocols that control the forwarding of data and

  1. Strength improvement of fibre cement product

    Directory of Open Access Journals (Sweden)

    Waranya Sonphuak

    2013-10-01

    Full Text Available This paper presents a methodology to improve the strength or the Modulus of Rupture (MOR of fibre cement. The Six Sigma approach with the DMAIC steps was applied to a case study company. This research started from defining problem, setting the project objective and the project scope. Next, the measurement system was analyzed and the process map was set up. The potential factors of the problem was then determined. Due to there were many factors that affect the MOR, the Cause and Effect Matrix and the Failure Mode and Effect Analysis technique were then used to reduce the number of factors to be studied further. Next, three process factors, which were the pulp slurry freeness, the film-layer thickness, and the pressure step, were optimized using the results from the Box-Behnken experimental design. Other 13 remaining factors were improved by creating or revising the standard work instructions and training the operators. After that, the statistical process control and the control plan were set up to control the production processes. After improvement, the process capability index (Ppk significantly increased from 0.26 to 1.35.

  2. (Special Issue - Wireless Manufacturing) RFID in product lifecycle management: a case in the automotive industry

    OpenAIRE

    Cao, Hui; Folan, Paul; Mascolo, Julien Etienne; Browne, Jim J

    2009-01-01

    Abstract The circumstances of globalisation and ever-stricter environmental legislation over the past decade have led enterprises to work together to transform products into extended products, and to manage these throughout their life cycle. Innovative Radio Frequency Identification (RFID) technology can be introduced as an enabler of Product Lifecycle Management (PLM) business, by enhancing the traceability of the product throughout its value chain via automatic identification, en...

  3. Improving traffic flow at a 2-to-1 lane reduction with wirelessly connected, adaptive cruise control vehicles

    Science.gov (United States)

    Davis, L. C.

    2016-06-01

    Wirelessly connected vehicles that exchange information about traffic conditions can reduce delays caused by congestion. At a 2-to-1 lane reduction, the improvement in flow past a bottleneck due to traffic with a random mixture of 40% connected vehicles is found to be 52%. Control is based on connected-vehicle-reported velocities near the bottleneck. In response to indications of congestion the connected vehicles, which are also adaptive cruise control vehicles, reduce their speed in slowdown regions. Early lane changes of manually driven vehicles from the terminated lane to the continuous lane are induced by the slowing connected vehicles. Self-organized congestion at the bottleneck is thus delayed or eliminated, depending upon the incoming flow magnitude. For the large majority of vehicles, travel times past the bottleneck are substantially reduced. Control is responsible for delaying the onset of congestion as the incoming flow increases. Adaptive cruise control increases the flow out of the congested state at the bottleneck. The nature of the congested state, when it occurs, appears to be similar under a variety of conditions. Typically 80-100 vehicles are approximately equally distributed between the lanes in the 500 m region prior to the end of the terminated lane. Without the adaptive cruise control capability, connected vehicles can delay the onset of congestion but do not increase the asymptotic flow past the bottleneck. Calculations are done using the Kerner-Klenov three-phase theory, stochastic discrete-time model for manual vehicles. The dynamics of the connected vehicles is given by a conventional adaptive cruise control algorithm plus commanded deceleration. Because time in the model for manual vehicles is discrete (one-second intervals), it is assumed that the acceleration of any vehicle immediately in front of a connected vehicle is constant during the time interval, thereby preserving the computational simplicity and speed of a discrete-time model.

  4. WSN中LEACH路由算法的改进%IMPROVING LEACH ROUTING ALGORITHM IN WIRELESS SENSOR NETWORK

    Institute of Scientific and Technical Information of China (English)

    郑少朋; 王涛; 彭刚

    2011-01-01

    For serious imbalance issues of energy consumption of nodes in wireless sensor network, based on tow energy adaptive clustering hierarchy (LEACH) routing algorithm,and integrated with the idea of minimum spanning tree,we propose a new algorithm of LEACH-PD.The algorithm makes reasonable choice of cluster header according to comprehensive reference of residual energy of the nodes as well as the distance between base station and nodes, the inter-cluster communicates with the base station by multi-hop forwarding.Simulation results provided by NS2 showed that, compared with LEACH, the improved LEACH-PD algorithm can effectively prolong the survival time of the network by optimising network load and energy consumption,etc.%针对无线传感器网络节点能耗严重失衡问题,以低功耗自适应聚类LEACH(Low Energy Adaptive Clustering Hierarchy)算法为基础,融合最小生成树的思想,提出一种新的LEACH-PD(Low Energy Adaptive Clustering Hierarchy based on Power and Distance)算法.该算法综合参考节点的剩余能量以及节点到基站的距离合理选择簇首,簇间采用多跳转发的方式与基站进行通信.NS2仿真结果证明,与LEACH算法相比,改进后的LEACH-PD算法在网络负载、能量消耗等方面进行优化,能有效延长网络的生存时间.

  5. Intelligent Caching Wireless Data Access in the Wireless Spectrum

    Directory of Open Access Journals (Sweden)

    Syazwa Mad Jais

    2013-05-01

    Full Text Available The evolution wireless technologies are growing rapidly in upcoming years. It is expected that many users will shift to more advanced devices that will contribute to gain higher demand in wireless spectrum. However, the capacity for the allocation frequency in the wireless spectrum is typically limited in wireless data transmission. Therefore, when the loads of wireless users in the wireless communications are increasing, the need of cache mechanisms such as Web caches or Web servers are crucial. The scalability demands on internet infrastructure keep increasing as the internet continues to grow in popularity and size. Therefore, the existence and development in Web caching technologies will contribute to bandwidth savings, network latency reduction, improve content availability and subsequently server load balancing. This paper will studies and investigates the cache performance in wireless spectrum with the purpose of dealing with the data growth since the spectrum crisis becomes a serious matter lately. The performance improvement will be observed using caching scheme which allows for time shifting and load shifting in accessing the wireless data with the better cache deployment in the network system.

  6. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    Energy Technology Data Exchange (ETDEWEB)

    H.C. Maru; M. Farooque

    2003-03-01

    The program efforts are focused on technology and system optimization for cost reduction, commercial design development, and prototype system field trials. The program is designed to advance the carbonate fuel cell technology from full-size field test to the commercial design. FuelCell Energy, Inc. (FCE) is in the later stage of the multiyear program for development and verification of carbonate fuel cell based power plants supported by DOE/NETL with additional funding from DOD/DARPA and the FuelCell Energy team. FCE has scaled up the technology to full-size and developed DFC{reg_sign} stack and balance-of-plant (BOP) equipment technology to meet product requirements, and acquired high rate manufacturing capabilities to reduce cost. FCE has designed submegawatt (DFC300A) and megawatt (DFC1500 and DFC3000) class fuel cell products for commercialization of its DFC{reg_sign} technology. A significant progress was made during the reporting period. The reforming unit design was optimized using a three-dimensional stack simulation model. Thermal and flow uniformities of the oxidant-In flow in the stack module were improved using computational fluid dynamics based flow simulation model. The manufacturing capacity was increased. The submegawatt stack module overall cost was reduced by {approx}30% on a per kW basis. An integrated deoxidizer-prereformer design was tested successfully at submegawatt scale using fuels simulating digester gas, coal bed methane gas and peak shave (natural) gas.

  7. Validation of Remote Sensing Retrieval Products using Data from a Wireless Sensor-Based Online Monitoring in Antarctica

    Directory of Open Access Journals (Sweden)

    Xiuhong Li

    2016-11-01

    Full Text Available Of the modern technologies in polar-region monitoring, the remote sensing technology that can instantaneously form large-scale images has become much more important in helping acquire parameters such as the freezing and melting of ice as well as the surface temperature, which can be used in the research of global climate change, Antarctic ice sheet responses, and cap formation and evolution. However, the acquirement of those parameters is impacted remarkably by the climate and satellite transit time which makes it almost impossible to have timely and continuous observation data. In this research, a wireless sensor-based online monitoring platform (WSOOP for the extreme polar environment is applied to obtain a long-term series of data which is site-specific and continuous in time. Those data are compared and validated with the data from a weather station at Zhongshan Station Antarctica and the result shows an obvious correlation. Then those data are used to validate the remote sensing products of the freezing and melting of ice and the surface temperature and the result also indicated a similar correlation. The experiment in Antarctica has proven that WSOOP is an effective system to validate remotely sensed data in the polar region.

  8. Validation of Remote Sensing Retrieval Products using Data from a Wireless Sensor-Based Online Monitoring in Antarctica.

    Science.gov (United States)

    Li, Xiuhong; Cheng, Xiao; Yang, Rongjin; Liu, Qiang; Qiu, Yubao; Zhang, Jialin; Cai, Erli; Zhao, Long

    2016-11-17

    Of the modern technologies in polar-region monitoring, the remote sensing technology that can instantaneously form large-scale images has become much more important in helping acquire parameters such as the freezing and melting of ice as well as the surface temperature, which can be used in the research of global climate change, Antarctic ice sheet responses, and cap formation and evolution. However, the acquirement of those parameters is impacted remarkably by the climate and satellite transit time which makes it almost impossible to have timely and continuous observation data. In this research, a wireless sensor-based online monitoring platform (WSOOP) for the extreme polar environment is applied to obtain a long-term series of data which is site-specific and continuous in time. Those data are compared and validated with the data from a weather station at Zhongshan Station Antarctica and the result shows an obvious correlation. Then those data are used to validate the remote sensing products of the freezing and melting of ice and the surface temperature and the result also indicated a similar correlation. The experiment in Antarctica has proven that WSOOP is an effective system to validate remotely sensed data in the polar region.

  9. Efficiency improvement in multi-sensor wireless network based estimation algorithms for distributed parameter systems with application at the heat transfer

    Science.gov (United States)

    Volosencu, Constantin; Curiac, Daniel-Ioan

    2013-12-01

    This paper gives a technical solution to improve the efficiency in multi-sensor wireless network based estimation for distributed parameter systems. A complex structure based on some estimation algorithms, with regression and autoregression, implemented using linear estimators, neural estimators and ANFIS estimators, is developed for this purpose. The three kinds of estimators are working with precision on different parts of the phenomenon characteristic. A comparative study of three methods - linear and nonlinear based on neural networks and adaptive neuro-fuzzy inference system - to implement these algorithms is made. The intelligent wireless sensor networks are taken in consideration as an efficient tool for measurement, data acquisition and communication. They are seen as a "distributed sensor", placed in the desired positions in the measuring field. The algorithms are based on regression using values from adjacent and also on auto-regression using past values from the same sensor. A modelling and simulation for a case study is presented. The quality of estimation is validated using a quadratic criterion. A practical implementation is made using virtual instrumentation. Applications of this complex estimation system are in fault detection and diagnosis of distributed parameter systems and discovery of malicious nodes in wireless sensor networks.

  10. Improved one-way hash chain and revocation polynomial-based self-healing group key distribution schemes in resource-constrained wireless networks.

    Science.gov (United States)

    Chen, Huifang; Xie, Lei

    2014-12-18

    Self-healing group key distribution (SGKD) aims to deal with the key distribution problem over an unreliable wireless network. In this paper, we investigate the SGKD issue in resource-constrained wireless networks. We propose two improved SGKD schemes using the one-way hash chain (OHC) and the revocation polynomial (RP), the OHC&RP-SGKD schemes. In the proposed OHC&RP-SGKD schemes, by introducing the unique session identifier and binding the joining time with the capability of recovering previous session keys, the problem of the collusion attack between revoked users and new joined users in existing hash chain-based SGKD schemes is resolved. Moreover, novel methods for utilizing the one-way hash chain and constructing the personal secret, the revocation polynomial and the key updating broadcast packet are presented. Hence, the proposed OHC&RP-SGKD schemes eliminate the limitation of the maximum allowed number of revoked users on the maximum allowed number of sessions, increase the maximum allowed number of revoked/colluding users, and reduce the redundancy in the key updating broadcast packet. Performance analysis and simulation results show that the proposed OHC&RP-SGKD schemes are practical for resource-constrained wireless networks in bad environments, where a strong collusion attack resistance is required and many users could be revoked.

  11. Improved One-Way Hash Chain and Revocation Polynomial-Based Self-Healing Group Key Distribution Schemes in Resource-Constrained Wireless Networks

    Directory of Open Access Journals (Sweden)

    Huifang Chen

    2014-12-01

    Full Text Available Self-healing group key distribution (SGKD aims to deal with the key distribution problem over an unreliable wireless network. In this paper, we investigate the SGKD issue in resource-constrained wireless networks. We propose two improved SGKD schemes using the one-way hash chain (OHC and the revocation polynomial (RP, the OHC&RP-SGKD schemes. In the proposed OHC&RP-SGKD schemes, by introducing the unique session identifier and binding the joining time with the capability of recovering previous session keys, the problem of the collusion attack between revoked users and new joined users in existing hash chain-based SGKD schemes is resolved. Moreover, novel methods for utilizing the one-way hash chain and constructing the personal secret, the revocation polynomial and the key updating broadcast packet are presented. Hence, the proposed OHC&RP-SGKD schemes eliminate the limitation of the maximum allowed number of revoked users on the maximum allowed number of sessions, increase the maximum allowed number of revoked/colluding users, and reduce the redundancy in the key updating broadcast packet. Performance analysis and simulation results show that the proposed OHC&RP-SGKD schemes are practical for resource-constrained wireless networks in bad environments, where a strong collusion attack resistance is required and many users could be revoked.

  12. Wireless Security

    CERN Document Server

    Osterhage, Wolfgang

    2011-01-01

    In the wake of the growing use of wireless communications, new types of security risks have evolved. Wireless Security covers the major topic of wireless communications with relevance both to organizations and private users. The technological background of these applications and protocols is laid out and presented in detail. Special emphasis is placed on the IEEE 802.11x-Standards that have been introduced for WLAN technology. Other technologies covered besides WLAN include: mobile phones, bluetooth and infrared. In each chapter a major part is devoted to security risks and provisions includin

  13. Learning and improvement in product innovation processes: Enabling behaviors

    NARCIS (Netherlands)

    Gieskes, José F.B.; Langenberg, Ilse

    2001-01-01

    Product Innovation is described as a continuous and cross-functional process involving all stages in the product life cycle. This approach gives way to study product innovation processes from a continuous improvement and learning viewpoint. The Continuous Improvement in the global product MAnagement

  14. Learning and improvement in product innovation processes: Enabling behaviors

    NARCIS (Netherlands)

    Gieskes, J.F.B.; Langenberg, Ilse

    2001-01-01

    Product Innovation is described as a continuous and cross-functional process involving all stages in the product life cycle. This approach gives way to study product innovation processes from a continuous improvement and learning viewpoint. The Continuous Improvement in the global product MAnagement

  15. Emerging wireless networks concepts, techniques and applications

    CERN Document Server

    Makaya, Christian

    2011-01-01

    An authoritative collection of research papers and surveys, Emerging Wireless Networks: Concepts, Techniques, and Applications explores recent developments in next-generation wireless networks (NGWNs) and mobile broadband networks technologies, including 4G (LTE, WiMAX), 3G (UMTS, HSPA), WiFi, mobile ad hoc networks, mesh networks, and wireless sensor networks. Focusing on improving the performance of wireless networks and provisioning better quality of service and quality of experience for users, it reports on the standards of different emerging wireless networks, applications, and service fr

  16. Wireless optical telecommunications

    CERN Document Server

    Bouchet, Olivier

    2013-01-01

    Wireless optical communication refers to communication based on the unguided propagation of optical waves. The past 30 years have seen significant improvements in this technique - a wireless communication solution for the current millennium - that offers an alternative to radio systems; a technique that could gain attractiveness due to recent concerns regarding the potential effects of radiofrequency waves on human health.The aim of this book is to look at the free space optics that are already used for the exchange of current information; its many benefits, such as incorporating chan

  17. Improved sustainability in organic pig production

    OpenAIRE

    Kongsted, Anne Grete; Hermansen, John E.; Jakobsen, Malene

    2015-01-01

    The local and global sale of organic pork produced in Denmark has increased markedly in recent years. Organic pig production is associated with several positive aspects from a societal point of view e.g. very low use of antibiotics and animals being able to express more of their natural behavior compared to conventional production. However, there are some challenges regarding sustainability that needs to be addressed. In Denmark, organic pig production is based on outdoor sow production all y...

  18. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    Energy Technology Data Exchange (ETDEWEB)

    H.C. Maru; M. Farooque

    2005-03-01

    waste water treatment gas, DFC power plants are ready today and do not require the creation of a hydrogen infrastructure. Product improvement progress made during the program period in the areas of technology, manufacturing processes, cost reduction and balance-of-plant equipment designs is discussed in this report.

  19. Optimized sampling strategy of Wireless sensor network for validation of remote sensing products over heterogeneous coarse-resolution pixel

    Science.gov (United States)

    Peng, J.; Liu, Q.; Wen, J.; Fan, W.; Dou, B.

    2015-12-01

    Coarse-resolution satellite albedo products are increasingly applied in geographical researches because of their capability to characterize the spatio-temporal patterns of land surface parameters. In the long-term validation of coarse-resolution satellite products with ground measurements, the scale effect, i.e., the mismatch between point measurement and pixel observation becomes the main challenge, particularly over heterogeneous land surfaces. Recent advances in Wireless Sensor Networks (WSN) technologies offer an opportunity for validation using multi-point observations instead of single-point observation. The difficulty is to ensure the representativeness of the WSN in heterogeneous areas with limited nodes. In this study, the objective is to develop a ground-based spatial sampling strategy through consideration of the historical prior knowledge and avoidance of the information redundancy between different sensor nodes. Taking albedo as an example. First, we derive monthly local maps of albedo from 30-m HJ CCD images a 3-year period. Second, we pick out candidate points from the areas with higher temporal stability which helps to avoid the transition or boundary areas. Then, the representativeness (r) of each candidate point is evaluated through the correlational analysis between the point-specific and area-average time sequence albedo vector. The point with the highest r was noted as the new sensor point. Before electing a new point, the vector component of the selected points should be taken out from the vectors in the following correlational analysis. The selection procedure would be ceased once if the integral representativeness (R) meets the accuracy requirement. Here, the sampling method is adapted to both single-parameter and multi-parameter situations. Finally, it is shown that this sampling method has been effectively worked in the optimized layout of Huailai remote sensing station in China. The coarse resolution pixel covering this station could be

  20. Situational Process Improvement in Software Product Management

    NARCIS (Netherlands)

    Bekkers, W.J.

    2012-01-01

    Product management has become an essential strategic practice in most companies. This is increasingly more so in the software domain. Here organizations are rapidly evolving their products, have to deal with thousands of requirements, large numbers of stakeholders, and the alignment between products

  1. Agricultural Productivity Forecasts for Improved Drought Monitoring

    Science.gov (United States)

    Limaye, Ashutosh; McNider, Richard; Moss, Donald; Alhamdan, Mohammad

    2010-01-01

    Water stresses on agricultural crops during critical phases of crop phenology (such as grain filling) has higher impact on the eventual yield than at other times of crop growth. Therefore farmers are more concerned about water stresses in the context of crop phenology than the meteorological droughts. However the drought estimates currently produced do not account for the crop phenology. US Department of Agriculture (USDA) and National Oceanic and Atmospheric Administration (NOAA) have developed a drought monitoring decision support tool: The U.S. Drought Monitor, which currently uses meteorological droughts to delineate and categorize drought severity. Output from the Drought Monitor is used by the States to make disaster declarations. More importantly, USDA uses the Drought Monitor to make estimates of crop yield to help the commodities market. Accurate estimation of corn yield is especially critical given the recent trend towards diversion of corn to produce ethanol. Ethanol is fast becoming a standard 10% ethanol additive to petroleum products, the largest traded commodity. Thus the impact of large-scale drought will have dramatic impact on the petroleum prices as well as on food prices. USDA's World Agricultural Outlook Board (WAOB) serves as a focal point for economic intelligence and the commodity outlook for U.S. WAOB depends on Drought Monitor and has emphatically stated that accurate and timely data are needed in operational agrometeorological services to generate reliable projections for agricultural decision makers. Thus, improvements in the prediction of drought will reflect in early and accurate assessment of crop yields, which in turn will improve commodity projections. We have developed a drought assessment tool, which accounts for the water stress in the context of crop phenology. The crop modeling component is done using various crop modules within Decision Support System for Agrotechnology Transfer (DSSAT). DSSAT is an agricultural crop

  2. Gasification Product Improvement Facility (GPIF). Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The gasifier selected for development under this contract is an innovative and patented hybrid technology which combines the best features of both fixed-bed and fluidized-bed types. PyGas{trademark}, meaning Pyrolysis Gasification, is well suited for integration into advanced power cycles such as IGCC. It is also well matched to hot gas clean-up technologies currently in development. Unlike other gasification technologies, PyGas can be designed into both large and small scale systems. It is expected that partial repowering with PyGas could be done at a cost of electricity of only 2.78 cents/kWh, more economical than natural gas repowering. It is extremely unfortunate that Government funding for such a noble cause is becoming reduced to the point where current contracts must be canceled. The Gasification Product Improvement Facility (GPIF) project was initiated to provide a test facility to support early commercialization of advanced fixed-bed coal gasification technology at a cost approaching $1,000 per kilowatt for electric power generation applications. The project was to include an innovative, advanced, air-blown, pressurized, fixed-bed, dry-bottom gasifier and a follow-on hot metal oxide gas desulfurization sub-system. To help defray the cost of testing materials, the facility was to be located at a nearby utility coal fired generating site. The patented PyGas{trademark} technology was selected via a competitive bidding process as the candidate which best fit overall DOE objectives. The paper describes the accomplishments to date.

  3. Energy Efficiency of the IEEE 802.15.4 Standard in Dense Wireless Microsensor Networks: Modeling and Improvement Perspectives

    CERN Document Server

    Bougard, Bruno; Daly, Denis C; Chandrakasan, Anantha; Dehaene, Wim

    2011-01-01

    Wireless microsensor networks, which have been the topic of intensive research in recent years, are now emerging in industrial applications. An important milestone in this transition has been the release of the IEEE 802.15.4 standard that specifies interoperable wireless physical and medium access control layers targeted to sensor node radios. In this paper, we evaluate the potential of an 802.15.4 radio for use in an ultra low power sensor node operating in a dense network. Starting from measurements carried out on the off-the-shelf radio, effective radio activation and link adaptation policies are derived. It is shown that, in a typical sensor network scenario, the average power per node can be reduced down to 211m mm mW. Next, the energy consumption breakdown between the different phases of a packet transmission is presented, indicating which part of the transceiver architecture can most effectively be optimized in order to further reduce the radio power, enabling self-powered wireless microsensor networks...

  4. Improving productivity in academic group practice.

    Science.gov (United States)

    Schroeder, R E

    1995-01-01

    The purposes of this article are to identify all the variables that impact productivity in a group practice, contrast the administrator's and physician's definitions of productivity, discuss current measurement tools and outline the steps in a traditional productivity project. The article identifies key variables that management must address: physician education, goals, feedback and rewards that are critical to the success of any productivity undertaking. Upon completion of this article, the reader will be able to understand the differences in the way administrators and physicians view productivity and be able to identify the vital areas that must be addressed in any effort to increase productivity. While the article focuses on the academic setting, the principles are applicable in any group practice.

  5. Applications and Security of Next-Generation, User-Centric Wireless Systems

    Directory of Open Access Journals (Sweden)

    Danfeng Yao

    2010-07-01

    Full Text Available Pervasive wireless systems have significantly improved end-users’ quality of life. As manufacturing costs decrease, communications bandwidth increases, and contextual information is made more readily available, the role of next generation wireless systems in facilitating users’ daily activities will grow. Unique security and privacy issues exist in these wireless, context-aware, often decentralized systems. For example, the pervasive nature of such systems allows adversaries to launch stealthy attacks against them. In this review paper, we survey several emergent personal wireless systems and their applications. These systems include mobile social networks, active implantable medical devices, and consumer products. We explore each system’s usage of contextual information and provide insight into its security vulnerabilities. Where possible, we describe existing solutions for defendingagainst these vulnerabilities. Finally, we point out promising future research directions for improving these systems’ robustness and security

  6. Production of Genetically Improved Organic Nile Tilapia

    NARCIS (Netherlands)

    Charo, H.; Komen, J.; Bovenhuis, H.; Rezk, M.A.; Ponzoni, R.W.

    2008-01-01

    Demand for organic products for human consumption has been on the increase due to the belief that organic products are safer and healthier to the consumer and the environment. In developing countries, Nile tilapia (Oreochromis niloticus) is usually grown in low-input organically fed ponds with littl

  7. Improving productivity through more effective time management.

    Science.gov (United States)

    Arnold, Edwin; Pulich, Marcia

    2004-01-01

    Effective time management has become increasingly important for managers as they seek to accomplish objectives in today's organizations, which have been restructured for efficiency while employing fewer people. Managers can improve their ability to manage time effectively by examining their attitudes toward time, analyzing time-wasting behaviors, and developing better time management skills. Managers can improve their performance and promotion potential with more effective time utilization. Strategies for improving time management skills are presented.

  8. Improving agricultural water productivity: Between optimism and caution

    NARCIS (Netherlands)

    Molden, D.J.; Oweis, T.; Steduto, P.; Bindraban, P.S.; Hanjra, A.; Kijne, J.

    2010-01-01

    In its broadest sense, water productivity (WP) is the net return for a unit of water used. Improvement of water productivity aims at producing more food, income, better livelihoods and ecosystem services with less water. There is considerable scope for improving water productivity of crop, livestock

  9. India: a Case of Fragile Wireless Service and Technology Adoption?

    NARCIS (Netherlands)

    L-F. Pau (Louis-François); J. Motiwalla

    2007-01-01

    textabstractWireless penetration and the Indian economy have grown significantly over the past few years, but how robust and sustainable is the adoption of wireless services and products? Several papers have discussed India as a wireless service and product market, and sometimes tried to assess quan

  10. India: a Case of Fragile Wireless Service and Technology Adoption?

    NARCIS (Netherlands)

    L-F. Pau (Louis-François); J. Motiwalla

    2007-01-01

    textabstractWireless penetration and the Indian economy have grown significantly over the past few years, but how robust and sustainable is the adoption of wireless services and products? Several papers have discussed India as a wireless service and product market, and sometimes tried to assess

  11. Improving the quotation process with product configuration

    DEFF Research Database (Denmark)

    Hvam, Lars; Christensen, Simon Pape

    2006-01-01

    How can product configuration support the process of engineering highly complex industrial products? This article describes how an IT-based product configuration system was developed to support the process of mak-ing budget quotations. The article is based on a research project carried out...... with focus on the big issues of the cement plant. The configuration system makes it possible to optimise the cement factories with respect to performance, an increased use of the com-pany’s components, and with respect to the use of previously manufactured components. Finally, the engineer-ing resources used...

  12. Good air quality in offices improves productivity

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    Three recent independent studies have documented that the quality of indoor air has a significant and positive influence or? the productivity of office workers. A combined analysis of the results of the three studies shows a significant relationship between productivity and perceived indoor air...... quality. The impact on productivity justifies a much higher indoor air quality than the minimum levels prescribed in present standards and guidelines. One way of providing air of high quality for people to breathe, without involving excessive ventilation rates and energy use, is to provide "personalized...... air" to each individual. The application of this concept is discussed in this paper: (C) 2000 Journal of Mechanical Engineering. All rights reserved....

  13. Good air quality in offices improves productivity

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    Three recent independent studies have documented that the quality of indoor air has a significant and positive influence on the productivity of office workers. A combined analysis of the results of the three studies shows a significant relationship between productivity and perceived indoor air...... quality. The impact on productivity justifies a much higher indoor air quality than the minimum levels prescribed in present standards and guidelines. One way of providing air of high quality for people to breathe, without involving excessive ventilation rates and energy use, is to provide "personalized...... air" to each individual. The application of this concept is discussed....

  14. Composition and methods for improved fuel production

    Energy Technology Data Exchange (ETDEWEB)

    Steele, Philip H.; Tanneru, Sathishkumar; Gajjela, Sanjeev K.

    2015-12-29

    Certain embodiments of the present invention are configured to produce boiler and transportation fuels. A first phase of the method may include oxidation and/or hyper-acidification of bio-oil to produce an intermediate product. A second phase of the method may include catalytic deoxygenation, esterification, or olefination/esterification of the intermediate product under pressurized syngas. The composition of the resulting product--e.g., a boiler fuel--produced by these methods may be used directly or further upgraded to a transportation fuel. Certain embodiments of the present invention also include catalytic compositions configured for use in the method embodiments.

  15. Good air quality in offices improves productivity

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    Three recent independent studies have documented that the quality of indoor air has a significant and positive influence or? the productivity of office workers. A combined analysis of the results of the three studies shows a significant relationship between productivity and perceived indoor air...... quality. The impact on productivity justifies a much higher indoor air quality than the minimum levels prescribed in present standards and guidelines. One way of providing air of high quality for people to breathe, without involving excessive ventilation rates and energy use, is to provide "personalized...... air" to each individual. The application of this concept is discussed in this paper: (C) 2000 Journal of Mechanical Engineering. All rights reserved....

  16. Good air quality in offices improves productivity

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    Three recent independent studies have documented that the quality of indoor air has a significant and positive influence on the productivity of office workers. A combined analysis of the results of the three studies shows a significant relationship between productivity and perceived indoor air...... quality. The impact on productivity justifies a much higher indoor air quality than the minimum levels prescribed in present standards and guidelines. One way of providing air of high quality for people to breathe, without involving excessive ventilation rates and energy use, is to provide "personalized...... air" to each individual. The application of this concept is discussed....

  17. NASA Bluetooth Wireless Communications

    Science.gov (United States)

    Miller, Robert D.

    2007-01-01

    NASA has been interested in wireless communications for many years, especially when the crew size of the International Space Station (ISS) was reduced to two members. NASA began a study to find ways to improve crew efficiency to make sure the ISS could be maintained with limited crew capacity and still be a valuable research testbed in Low-Earth Orbit (LEO). Currently the ISS audio system requires astronauts to be tethered to the audio system, specifically a device called the Audio Terminal Unit (ATU). Wireless communications would remove the tether and allow astronauts to freely float from experiment to experiment without having to worry about moving and reconnecting the associated cabling or finding the space equivalent of an extension cord. A wireless communication system would also improve safety and reduce system susceptibility to Electromagnetic Interference (EMI). Safety would be improved because a crewmember could quickly escape a fire while maintaining communications with the ground and other crewmembers at any location. In addition, it would allow the crew to overcome the volume limitations of the ISS ATU. This is especially important to the Portable Breathing Apparatus (PBA). The next generation of space vehicles and habitats also demand wireless attention. Orion will carry up to six crewmembers in a relatively small cabin. Yet, wireless could become a driving factor to reduce launch weight and increase habitable volume. Six crewmembers, each tethered to a panel, could result in a wiring mess even in nominal operations. In addition to Orion, research is being conducted to determine if Bluetooth is appropriate for Lunar Habitat applications.

  18. Improvement of biogas production by bioaugmentation.

    Science.gov (United States)

    Kovács, K L; Ács, N; Kovács, E; Wirth, R; Rákhely, G; Strang, Orsolya; Herbel, Zsófia; Bagi, Z

    2013-01-01

    Biogas production technologies commonly involve the use of natural anaerobic consortia of microbes. The objective of this study was to elucidate the importance of hydrogen in this complex microbial food chain. Novel laboratory biogas reactor prototypes were designed and constructed. The fates of pure hydrogen-producing cultures of Caldicellulosiruptor saccharolyticus and Enterobacter cloacae were followed in time in thermophilic and mesophilic natural biogas-producing communities, respectively. Molecular biological techniques were applied to study the altered ecosystems. A systematic study in 5-litre CSTR digesters revealed that a key fermentation parameter in the maintenance of an altered population balance is the loading rate of total organic solids. Intensification of the biogas production was observed and the results corroborate that the enhanced biogas productivity is associated with the increased abundance of the hydrogen producers. Fermentation parameters did not indicate signs of failure in the biogas production process. Rational construction of more efficient and sustainable biogas-producing microbial consortia is proposed.

  19. Improvement of Biogas Production by Bioaugmentation

    Science.gov (United States)

    Kovács, K. L.; Ács, N.; Kovács, E.; Wirth, R.; Rákhely, G.; Strang, Orsolya; Herbel, Zsófia; Bagi, Z.

    2013-01-01

    Biogas production technologies commonly involve the use of natural anaerobic consortia of microbes. The objective of this study was to elucidate the importance of hydrogen in this complex microbial food chain. Novel laboratory biogas reactor prototypes were designed and constructed. The fates of pure hydrogen-producing cultures of Caldicellulosiruptor saccharolyticus and Enterobacter cloacae were followed in time in thermophilic and mesophilic natural biogas-producing communities, respectively. Molecular biological techniques were applied to study the altered ecosystems. A systematic study in 5-litre CSTR digesters revealed that a key fermentation parameter in the maintenance of an altered population balance is the loading rate of total organic solids. Intensification of the biogas production was observed and the results corroborate that the enhanced biogas productivity is associated with the increased abundance of the hydrogen producers. Fermentation parameters did not indicate signs of failure in the biogas production process. Rational construction of more efficient and sustainable biogas-producing microbial consortia is proposed. PMID:23484123

  20. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    Energy Technology Data Exchange (ETDEWEB)

    H.C. Maru; M. Farooque

    2002-02-01

    generation, industrial cogeneration, marine applications and uninterrupted power for military bases. FuelCell Energy operated a 1.8 MW plant at a utility site in 1996-97, the largest fuel cell power plant ever operated in North America. This proof-of-concept power plant demonstrated high efficiency, low emissions, reactive power control, and unattended operation capabilities. Drawing on the manufacture, field test, and post-test experience of the full-size power plant; FuelCell Energy launched the Product Design Improvement (PDI) program sponsored by government and the private-sector cost-share. The PDI efforts are focused on technology and system optimization for cost reduction, commercial design development, and prototype system field trials. The program was initiated in December 1994. Year 2000 program accomplishments are discussed in this report.

  1. Farmers' adoption of improved vegetable production practices under ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-29

    Dec 29, 2008 ... The study was undertaken to evaluate the Fadama phase one vegetable production ... Key words: Adoption, improved vegetable, production practices, farmers and ..... score of the recommended planting distance for telfaria.

  2. Productivity improvement of high end cnc machines by dmaic methodology

    OpenAIRE

    Veeresh Bhusnur; Dr. Bhimasen Soragaon; Hemanth Kumar C

    2017-01-01

    This research mainly emphasizes on productivity improvement with the application of DMAIC (Define, Measure, Analyze, Measure, Improve, Control) which is sub methodology of Six Sigma. It shows the application of Six Sigma in Auma India Pvt. Ltd. to reduce the cycle time and set-up times of High End CNC machines. At Auma, one of the most critical problem is that the existing production rate cannot meet the customer demands. This work was focused on improving the production rate of CNC machines ...

  3. Improving Water Use in Fodder Production

    Directory of Open Access Journals (Sweden)

    Vanessa Mendoza-Grimón

    2015-05-01

    Full Text Available Water deficit in semi-arid regions limits the future of the livestock sector. Also, its high price represents a percentage of the total cost of forage production. Non-conventional water resources applied by subsurface drip irrigation (SDI, in which the safe use lies in the management and not on the level of water treatment, would enhance the ruminant production sustainability. To obtain the optimal benefit, the transformation of water per kilogram of dry matter produced must have a high grade of effectiveness. Under this premise, a maralfalfa crop (Penissetum sp, hybridum has been established with an SDI system and reclaimed water. Forage yield is analyzed with respect to a 40% irrigation reduction. This study shows that, with the use of these good irrigation management practices, it is possible to harvest an annual production of 90 to 72 t·ha−1 in the warmer regions of the Canary Islands. This implies water consumption between 13,200 and 8100 m3·ha−1. A water consumption of 21,000 m3·ha−1 per year for the same production, at a ratio of 230 L·t−1, can be estimated for the rest of the Canary Islands coastal regions. The use of the water management described in this paper can be profitable in the Canary Islands for fodder production.

  4. Improved space bandwidth product in image upconversion

    DEFF Research Database (Denmark)

    Dam, Jeppe Seidelin; Pedersen, Christian; Tidemand-Lichtenberg, Peter

    2012-01-01

    We present a technique increasing the space bandwidth product of a nonlinear image upconversion process used for spectral imaging. The technique exploits the strong dependency of the phase-matching condition in sum frequency generation (SFG) on the angle of propagation of the interacting fields...... with respect to the optical axis. Appropriate scanning of the phase-match condition (Δk=0) while acquiring images, allow us to perform monochromatic image reconstruction with a significantly increased space bandwidth product. We derive the theory for the image reconstruction process and demonstrate acquisition...... of images with >10 fold increase in space bandwidth product, i.e. the number of pixel elements, when compared to upconversion of images using fixed phase-match conditions....

  5. Interface Assignment-Based AODV Routing Protocol to Improve Reliability in Multi-Interface Multichannel Wireless Mesh Networks

    OpenAIRE

    Won-Suk Kim; Sang-Hwa Chung

    2015-01-01

    The utilization of wireless mesh networks (WMNs) has greatly increased, and the multi-interface multichannel (MIMC) technic has been widely used for the backbone network. Unfortunately, the ad hoc on-demand distance vector (AODV) routing protocol defined in the IEEE 802.11s standard was designed for WMNs using the single-interface single-channel technic. So, we define a problem that happens when the legacy AODV is used in MIMC WMNs and propose an interface assignment-based AODV (IA-AODV) in o...

  6. Improved Production of Mannanase by Streptomyces lividans.

    Science.gov (United States)

    Marga, F; Ghakis, C; Dupont, C; Morosoli, R; Kluepfel, D

    1996-12-01

    Replacement of the natural promoter of the (beta)-mannanase gene of Streptomyces lividans by lacp resulted in a 15-fold increase in enzyme production over that of the previously reported clone S. lividans IAF36, a clone carrying multiple copies of manA, and a 350-fold increase over that of the wild-type strain S. lividans 1326. In addition, the use of lacp in the shuttle vector pIAF199 allowed synthesis of the enzymes on carbon sources that did not contain mannan, such as xylan and whey, which offers interesting possibilities for industrial production of the enzyme.

  7. Improving Marketing's Contribution to New Product Development

    NARCIS (Netherlands)

    Drechsler, Wenzel; Natter, Martin; Leeflang, Peter S. H.

    2013-01-01

    In many firms, the marketing department plays a minor role in new product development (NPD). However, recent research demonstrates that marketing capabilities more strongly influence firm performance than other areas such as research and development. This finding underscores the importance of identi

  8. Improved riboflavin production by Eremothecium ashbyii using ...

    African Journals Online (AJOL)

    user

    2011-11-09

    Nov 9, 2011 ... productivity of riboflavin, the shake-flask fed-batch cultivation of E. ashbyii was established with glucose and yeast ... rate from 48 to 96 h of fermentation. As a result ... has been widely used in the fields of feed and food additives ... Riboflavin concentration in fermentation broth was determined according to ...

  9. Improving Marketing's Contribution to New Product Development

    NARCIS (Netherlands)

    Drechsler, Wenzel; Natter, Martin; Leeflang, Peter S. H.

    2013-01-01

    In many firms, the marketing department plays a minor role in new product development (NPD). However, recent research demonstrates that marketing capabilities more strongly influence firm performance than other areas such as research and development. This finding underscores the importance of identi

  10. Improvement of Biogas Production by Bioaugmentation

    Directory of Open Access Journals (Sweden)

    K. L. Kovács

    2013-01-01

    Full Text Available Biogas production technologies commonly involve the use of natural anaerobic consortia of microbes. The objective of this study was to elucidate the importance of hydrogen in this complex microbial food chain. Novel laboratory biogas reactor prototypes were designed and constructed. The fates of pure hydrogen-producing cultures of Caldicellulosiruptor saccharolyticus and Enterobacter cloacae were followed in time in thermophilic and mesophilic natural biogas-producing communities, respectively. Molecular biological techniques were applied to study the altered ecosystems. A systematic study in 5-litre CSTR digesters revealed that a key fermentation parameter in the maintenance of an altered population balance is the loading rate of total organic solids. Intensification of the biogas production was observed and the results corroborate that the enhanced biogas productivity is associated with the increased abundance of the hydrogen producers. Fermentation parameters did not indicate signs of failure in the biogas production process. Rational construction of more efficient and sustainable biogas-producing microbial consortia is proposed.

  11. Improving Marketing's Contribution to New Product Development

    NARCIS (Netherlands)

    Drechsler, Wenzel; Natter, Martin; Leeflang, Peter S. H.

    In many firms, the marketing department plays a minor role in new product development (NPD). However, recent research demonstrates that marketing capabilities more strongly influence firm performance than other areas such as research and development. This finding underscores the importance of

  12. Introductory survey for wireless infrared communications

    Directory of Open Access Journals (Sweden)

    Munsif Ali Jatoi

    2014-08-01

    Full Text Available Wireless infrared communications can be defined as the propagation of light waves in free space using infrared radiation whose range is 400–700 nm. This range corresponds to frequencies of hundreds of terahertz, which is high for higher data rate applications. Wireless infrared is applied for higher data rates applications such as wireless computing, wireless video and wireless multimedia communication applications. Introduced by Gfeller, this field has grown with different link configurations, improved transmitter efficiency, increased receiver responsivity and various multiple access techniques for improved quality. Errors are caused because of background light, which causes degradation overall system performance. Error correction techniques are used to remove the errors caused during transmission. This study provides a brief account on field theory used for error correction in wireless infrared systems. The results are produced in terms of bit error rate and signal-to-noise ratio for various bit lengths to show the ability of encoding and decoding algorithms.

  13. 无线局域网退避算法的研究与改进%Wireless LAN backoff algorithm and Its Improvement Research

    Institute of Scientific and Technical Information of China (English)

    陆彩霞

    2015-01-01

    Due to defects of the wireless'shortages on transmission rate,coverage and stability,this paper starts from the CSMA / CA mechanism of IEEE 802.11MAC protocol,and summarizes the advantages and disadvantages of various typical back-off algorithms.Then it introduces a new back-off algorithm.Computer simulation experiments show that the proposed algorithm can improve the network throughput and optimize the performance of the wireless network .%针对无线网络在传输速率、覆盖范围及稳定性等方面的缺陷,本文从IEEE 802.11MAC协议的 CSMA/CA 机制出发,总结了传统退避算法的优缺点,引入了一种新的退避算法,计算机仿真实验表明,新算法能显著提高网络的吞吐量,优化无线网络运行性能.

  14. A Survey of Wireless Communications for the Electric Power System

    Energy Technology Data Exchange (ETDEWEB)

    Akyol, Bora A.; Kirkham, Harold; Clements, Samuel L.; Hadley, Mark D.

    2010-01-27

    A key mission of the U.S. Department of Energy (DOE) Office of Electricity Delivery and Energy Reliability (OE) is to enhance the security and reliability of the nation’s energy infrastructure. Improving the security of control systems, which enable the automated control of our energy production and distribution, is critical for protecting the energy infrastructure and the integral function that it serves in our lives. The DOE-OE Control Systems Security Program provides research and development to help the energy industry actively pursue advanced security solutions for control systems. The focus of this report is analyzing how, where, and what type of wireless communications are suitable for deployment in the electric power system and to inform implementers of their options in wireless technologies. The discussions in this report are applicable to enhancing both the communications infrastructure of the current electric power system and new smart system deployments. The work described in this report includes a survey of the following wireless technologies: • IEEE 802.16 d and e (WiMAX) • IEEE 802.11 (Wi-Fi) family of a, b, g, n, and s • Wireless sensor protocols that use parts of the IEEE 802.15.4 specification: WirelessHART, International Society of Automation (ISA) 100.11a, and Zigbee • The 2, 3, and 4 generation (G )cellular technologies of GPRS/EDGE/1xRTT, HSPA/EVDO, and Long-Term Evolution (LTE)/HSPA+UMTS.

  15. Status of Agricultural Production and Crop Variety Improvement in Thailand

    Institute of Scientific and Technical Information of China (English)

    JIAO Chun-hai; GUO Ying; YAO Ming-hua; WAN Zheng-huang

    2012-01-01

    We introduced basic conditions of agricultural production in Thailand, and variety improvement of major crops, including rice, cassava, rubber, and vegetable, in the hope of providing reference for agricultural production and crop variety improvement in Hubei Province and even in the whole country.

  16. 一种改进的无线自主传感器网络定位算法%Improved Location Algorithm for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    殷琪; 徐巍

    2012-01-01

    The location information of the sensor node is one of the key technologies in Wireless sensor network(WSN). To improve the location accuracy, a geometric localization algorithmis proposed for wireless sensor networks. Nodes in the network area is divided into anchor nodes and unknown nodes, using the method of slope geometry, select the appropriate anchor node, to determine the location of unknown nodes more accurately. This paper proposed the least square error method based on the trilateration to improve the algorithm accuracy. A Matlab simulation model based on the new algorithm is established. The results show that the proposed algorithm improves node location accuracy a lot with same amount of anchor nodes under same radio range condition.%节点定位技术是无线自主传感器网络中的关键技术之一.为了提高定位精度,提出一种基于几何斜率的无线传感器网络(WSN)定位算法.网络区域中的节点分为锚节点和未知节点,利用几何学斜率的方法选取合适的锚节点,能够更精确地确定未知节点的位置.在三边测量法上运用最小平方误差方法求解,能够提高算法的精度.在新算法的基础上建立Matlab仿真.仿真结果表明改进的DV-HOP算法,在相同的锚节点数量的情况下,节点定位精度有明显的提高.

  17. Synthetic biology of avermectin for production improvement and structure diversification.

    Science.gov (United States)

    Zhuo, Ying; Zhang, Tao; Wang, Qi; Cruz-Morales, Pablo; Zhang, Buchang; Liu, Mei; Barona-Gómez, Francisco; Zhang, Lixin

    2014-03-01

    Natural products are still key sources of current clinical drugs and innovative therapeutic agents. Since wild-type microorganisms only produce natural products in very small quantities, yields of production strains need to be improved by breaking down the precise genetic and biochemical circuitry. Herein, we use avermectins as an example of production improvement and chemical structure diversification by synthetic biology. Avermectins are macrocyclic lactones produced by Streptomyces avermitilis and are well known and widely used for antiparasitic therapy. Given the importance of this molecule and its derivatives, many efforts and strategies were employed to improve avermectin production and generate new active analogues. This review describes the current status of synthetic strategies successfully applied for developing natural-product-producing strains and discusses future prospects for the application of enhanced avermectin production. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Integration of RFID and Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    Miodrag; Bolic; Amiya; Nayak; Ivan; Stojmenovi.

    2007-01-01

    Radio Frequency Identification (RFID) and Wireless Sensor Network (WSN) are two important wireless technologies that have wide variety of applications and provide limitless future potentials. However,RFID and sensor networks almost are under development in parallel way. Integration of RFID and wireless sensor networks attracts little attention from research community. This paper first presents a brief introduction on RFID,and then investigates recent research works,new products/patents and applications that integrate RFID with sensor networks. Four types of integration are discussed. They are integrating tags with sensors,integrating tags with wireless sensor nodes,integrating readers with wireless sensor nodes and wire-less devices,and mix of RFID and sensors. New challenges and future works are discussed in the end.

  19. An Improved Profile-Based Location Caching with Fixed Local Anchor Based on Group Deregistration for Wireless Networks

    Directory of Open Access Journals (Sweden)

    Md. Kowsar Hossain

    2011-12-01

    Full Text Available Profile-Based Location Caching with Fixed Local Anchor (PCFLA Strategy helps to reduce the total location management cost by reducing the frequent access at HLR in wireless mobile network.The HLR is informed each time, whenever an MT moves from one LSTP region to another LSTP region. The old FLA and old VLR know about that by registration cancellation message from HLR. Then the oldFLA and old VLR delete the MT’s profile and old FLA sends a registration cancellation acknowledgement message to HLR. These cancellation messages for each LSTP movement create load onthe HLR as well as on the network. In this paper, Group Deregistration (GD is used in PCFLA to redauce these loads by minimizing the signaling cost and location management cost. The analytical modeling and experimental results demonstrate that our proposed method reduces the overall cost than PCFLA.

  20. Rechargeable wireless EMG sensor for prosthetic control.

    Science.gov (United States)

    Lichter, P A; Lange, E H; Riehle, T H; Anderson, S M; Hedin, D S

    2010-01-01

    Surface electrodes in modern myoelectric prosthetics are often embedded in the prosthesis socket and make contact with the skin. These electrodes detect and amplify muscle action potentials from voluntary contractions of the muscle in the residual limb and are used to control the prosthetic's movement and function. There are a number of performance-related deficiencies associated with external electrodes including the maintenance of sufficient electromyogram (EMG) signal amplitude, extraneous noise acquisition, and proper electrode interface maintenance that are expected to be improved or eliminated using the proposed implanted sensors. This research seeks to investigate the design components for replacing external electrodes with fully-implantable myoelectric sensors that include a wireless interface to the prosthetic limbs. This implanted technology will allow prosthetic limb manufacturers to provide products with increased performance, capability, and patient-comfort. The EMG signals from the intramuscular recording electrode are amplified and wirelessly transmitted to a receiver in the prosthetic limb. Power to the implant is maintained using a rechargeable battery and an inductive energy transfer link from the prosthetic. A full experimental system was developed to demonstrate that a wireless biopotential sensor can be designed that meets the requirements of size, power, and performance for implantation.

  1. Onboard Plasmatron Hydrogen Production for Improved Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Daniel R. Cohn; Leslie Bromberg; Kamal Hadidi

    2005-12-31

    A plasmatron fuel reformer has been developed for onboard hydrogen generation for vehicular applications. These applications include hydrogen addition to spark-ignition internal combustion engines, NOx trap and diesel particulate filter (DPF) regeneration, and emissions reduction from spark ignition internal combustion engines First, a thermal plasmatron fuel reformer was developed. This plasmatron used an electric arc with relatively high power to reform fuels such as gasoline, diesel and biofuels at an oxygen to carbon ratio close to 1. The draw back of this device was that it has a high electric consumption and limited electrode lifetime due to the high temperature electric arc. A second generation plasmatron fuel reformer was developed. It used a low-current high-voltage electric discharge with a completely new electrode continuation. This design uses two cylindrical electrodes with a rotating discharge that produced low temperature volumetric cold plasma., The lifetime of the electrodes was no longer an issue and the device was tested on several fuels such as gasoline, diesel, and biofuels at different flow rates and different oxygen to carbon ratios. Hydrogen concentration and yields were measured for both the thermal and non-thermal plasmatron reformers for homogeneous (non-catalytic) and catalytic reforming of several fuels. The technology was licensed to an industrial auto part supplier (ArvinMeritor) and is being implemented for some of the applications listed above. The Plasmatron reformer has been successfully tested on a bus for NOx trap regeneration. The successful development of the plasmatron reformer and its implementation in commercial applications including transportation will bring several benefits to the nation. These benefits include the reduction of NOx emissions, improving engine efficiency and reducing the nation's oil consumption. The objective of this program has been to develop attractive applications of plasmatron fuel reformer

  2. Wireless Connectivity and Capacity

    CERN Document Server

    Halldorsson, Magnus M

    2011-01-01

    Given $n$ wireless transceivers located in a plane, a fundamental problem in wireless communications is to construct a strongly connected digraph on them such that the constituent links can be scheduled in fewest possible time slots, assuming the SINR model of interference. In this paper, we provide an algorithm that connects an arbitrary point set in $O(\\log n)$ slots, improving on the previous best bound of $O(\\log^2 n)$ due to Moscibroda. This is complemented with a super-constant lower bound on our approach to connectivity. An important feature is that the algorithms allow for bi-directional (half-duplex) communication. One implication of this result is an improved bound of $\\Omega(1/\\log n)$ on the worst-case capacity of wireless networks, matching the best bound known for the extensively studied average-case. We explore the utility of oblivious power assignments, and show that essentially all such assignments result in a worst case bound of $\\Omega(n)$ slots for connectivity. This rules out a recent cla...

  3. Gender, smallholder livestock production, improvement and conservation in Africa

    Directory of Open Access Journals (Sweden)

    Never Assan

    2014-09-01

    Full Text Available Policy makers, developmental agents and researchers are now aware of the need to incorporate gender  issues in smallholder livestock production  planning and development in order to improve livestock productivity in Africa. This discussion  attempt to explore  the role of gender in smallholder livestock production,genetic improvement and conservation.Strategies to improve livestock production and conservation within the smallholder livestock sector  will not be successful unless gender related issues are taken into account.Ownership of different livestock species by men and women in smallholder livestock production sector  has been documented, often cattle and larger animals are owned by men, while goat keeping and backyard poultry production are largely women's domains.  Therefore, it is assumed that taking cognizance of gender differentials in smallholder livestock production intervention programs will result in effectively implementation of livestockdevelopment programs ensuring more optimal outcomes. The rationale for gender integration in livestock improvement and conservation is driven by the fact that different household members typically hold different livestock responsibilities; they also may have different livestock priorities and livestock production constraints. Gender sensitive livestock policy initiatives such as training women in livestock improvement  and conservation in smallholder livestock production sector should be adopted in order to address specific concerns and priorities of women as major stakeholders in livestock production.Gendered asymmetries in access to livestock and  services not only do a great disservice to women and men livestock smallholder farmers, but they also stifle the potential for more sustainable and effective actions along a given livestock improvement program. In most cases , where  livestock improvement and conservation programs  are being carried out, the lack of gender consideration

  4. 无线传感器路由算法的应用研究%Study on Improved MAC Protocol in Wireless Sensor Network

    Institute of Scientific and Technical Information of China (English)

    步登辉

    2011-01-01

    研究无线传感器路由算法,由于网络流量的突变性、时变性,传统无线传感器路由算法不能适应网络流量变化规律,导致网络信道竞争严重不公平、多边界问题和能量浪费严重,无线传感器网络生存时间过短.为了更好适应网络流量变化规律和有效延长网络生存时间,提出一种改进的无线传感器路由算法.算法首先对传统无线传感器路由算法退避机制进行改进,使信道竞争更加公平,以应对网络流量时变性,然后采用自适应占空比机制适合网络流量突发性,最后一个周期内同时发送多个数据组的调度方法,防止边界节点问题发生,从而使网络节省能量开销.在NS2仿真平台上进行了仿真,结果表明,改进S-MAC路由算法提高了网络平均吞吐量,使信道竞争更加公平,减少能量消耗,延长了网络生存时间.%S-MAC is the most representative wireless sensor network protocol, the fixed duty cycle of S-MAC fails to adapt to the change of network traffic very well, and BEB backoff strategy brings unfairness. In order to prolong the network lifetim, an improved S-MAC protocol was put forward in this paper. The protocol improves the BEB backoff strategy, makes the entire network load balance and improves channel competition, then the adaptive duty cycle dynamic adjustment was used to adapt to network traffic, multiple data packet was sent in a working cycle to save energy costs.. Lastly experiments are cayyied out in the NS2 network simulatio. Platform. The simulation results show that the improved S-MAC protocol improves network throughput and saves more energy, and the wireless sensor network lifetime is prolonged.

  5. Improved production efficiency in cattle to reduce their carbon ...

    African Journals Online (AJOL)

    Improved production efficiency in cattle to reduce their carbon footprint for beef ... is the second most important greenhouse gas (GHG) after carbon dioxide (CO2). ... to climate change, since enteric fermentation is responsible for 28% of global ...

  6. Recent Productivity Improvements to the National Transonic Facility

    Science.gov (United States)

    Popernack, Thomas G., Jr.; Sydnor, George H.

    1998-01-01

    Productivity gains have recently been made at the National Transonic Facility wind tunnel at NASA Langley Research Center. A team was assigned to assess and set productivity goals to achieve the desired operating cost and output of the facility. Simulations have been developed to show the sensitivity of selected process productivity improvements in critical areas to reduce overall test cycle times. The improvements consist of an expanded liquid nitrogen storage system, a new fan drive, a new tunnel vent stack heater, replacement of programmable logic controllers, an increased data communications speed, automated test sequencing, and a faster model changeout system. Where possible, quantifiable results of these improvements are presented. Results show that in most cases, improvements meet the productivity gains predicted by the simulations.

  7. Developing a methodology for sustainable production of improved ...

    African Journals Online (AJOL)

    Mo

    Serere Agricultural and Animal Production Research Institute (SAARI). ... method based on the three livestock improvement projects funded by COARD project where farmers were .... nucleus herds of Ankole, Nganda and Small East African.

  8. Service Productivity How to Measure and Improve It?

    Science.gov (United States)

    den Hartigh, Erik; Zegveld, Marc

    Productivity is a key performance measure for service businesses and serves as a compass for measuring their innovativeness. In this chapter we present a tool for measuring productivity in service businesses. Improvements in service business productivity do not depend on industry, business size or business growth, but on the specific knowledge and competences of managers. Using case examples we show various ways of how managers can improve the productivity of their service businesses. They can do so by adopting a perspective of standardization, flexibility or individualization. Based on these perspectives, we provide a framework that shows how managers can improve service business productivity by coordinating strategic orientation, value creation and the configuration of business processes.

  9. Productivity Improvement in Underground Coal Mines - A Case Study

    Directory of Open Access Journals (Sweden)

    Devi Prasad Mishra

    2013-01-01

    Full Text Available Improvement of productivity has become an important goal for today's coal industry in the race to increase price competitiveness. The challenge now lying ahead for the coal industry is to identify areas of waste, meet the market price and maintain a healthy profit. The only way to achieve this is to reduce production costs by improving productivity, efficiency and the effectiveness of the equipment. This paper aims to identify the various factors and problems affecting the productivity of underground coal mines adopting the bord and pillar method of mining and to propose suitable measures for improving them. The various key factors affecting productivity, namely the cycle of operations, manpower deployment, machine efficiency, material handling and management of manpower are discussed. In addition, the problem of side discharge loader (SDL cable handling resulting in the wastage of precious manpower resources and SDL breakdown have also been identified and resolved in this paper.

  10. Compressive sensing-based channel bandwidth improvement in optical wireless orthogonal frequency division multiplexing link using visible light emitting diode.

    Science.gov (United States)

    Won, Yong-Yuk; Yoon, Sang Min

    2014-08-25

    A new technique, which can compensate for the lack of channel bandwidth in an optical wireless orthogonal frequency division multiplexing (OFDM) link based on a light emitting diode (LED), is proposed. It uses an adaptive sampling and an inverse discrete cosine transform in order to convert an OFDM signal into a sparse waveform so that not only is the important data obtained efficiently but the redundancy one is removed. In compressive sensing (CS), a sparse signal that is sampled below the Nyquist/Shannon limit can be reconstructed successively with enough measurement. This means that the CS technique can increase the data rate of visible light communication (VLC) systems based on LEDs. It is observed that the data rate of the proposed CS-based VLC-OFDM link can be made 1.7 times greater than a conventional VLC-OFDM link (from 30.72 Mb/s to 51.2 Mb/s). We see that the error vector magnitude (EVM) of the quadrature phase shift keying (QPSK) symbol is 31% (FEC limit: EVM of 32%) at a compression ratio of 40%.

  11. Interface Assignment-Based AODV Routing Protocol to Improve Reliability in Multi-Interface Multichannel Wireless Mesh Networks

    Directory of Open Access Journals (Sweden)

    Won-Suk Kim

    2015-01-01

    Full Text Available The utilization of wireless mesh networks (WMNs has greatly increased, and the multi-interface multichannel (MIMC technic has been widely used for the backbone network. Unfortunately, the ad hoc on-demand distance vector (AODV routing protocol defined in the IEEE 802.11s standard was designed for WMNs using the single-interface single-channel technic. So, we define a problem that happens when the legacy AODV is used in MIMC WMNs and propose an interface assignment-based AODV (IA-AODV in order to resolve that problem. IA-AODV, which is based on multitarget path request, consists of the PREQ prediction scheme, the PREQ loss recovery scheme, and the PREQ sender assignment scheme. A detailed operation according to various network conditions and services is introduced, and the routing efficiency and network reliability of a network using IA-AODV are analyzed over the presented system model. Finally, after a real-world test-bed for MIMC WMNs using the IA-AODV routing protocol is implemented, the various indicators of the network are evaluated through experiments. When the proposed routing protocol is compared with the existing AODV routing protocol, it performs the path update using only 14.33% of the management frames, completely removes the routing malfunction, and reduces the UDP packet loss ratio by 0.0012%.

  12. Improving agricultural production under water scarcity in Fars province, Iran

    NARCIS (Netherlands)

    Hosseini, M.R.; Haile, A.M.; McClain, M.E.

    2012-01-01

    ABSTRACT Water scarcity is one of the major limiting factor for improving agricultural production in the world, which significantly affects agricultural production and livelihood of millions of people who live in arid and semi-arid regions. This case study presents the analysis of the effectiveness

  13. Improving environmental sustainability of Thai palm oil production in 2050

    NARCIS (Netherlands)

    Saswattecha, Kanokwan; Kroeze, Carolien; Jawjit, Warit; Hein, Lars

    2017-01-01

    Palm oil production has increased in Thailand with considerable environmental impacts. The aim of this study is to analyse possibilities to examine how the environmental sustainability of Thai palm oil production can be improved in the coming decades. To this end, we integrated a sectoral and a l

  14. Research efforts to improve performance of production systems

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In order to solve the problem of low efficiency of production systems, a lot of work has been done. The research efforts to improve the performance of production systems are summed up here and future research directions are discussed at last.

  15. A model of strategic product quality and process improvement incentives

    NARCIS (Netherlands)

    Veldman, Jasper; Gaalman, G.

    2013-01-01

    In many production firms it is common practice to financially reward managers for firm performance improvement. The use of financial incentives for improvement has been widely researched in several analytical and empirical studies. Literature has also addressed the strategic effect of incentives, in

  16. A model of strategic product quality and process improvement incentives

    NARCIS (Netherlands)

    Veldman, Jasper; Gaalman, Gerard

    In many production firms it is common practice to financially reward managers for firm performance improvement. The use of financial incentives for improvement has been widely researched in several analytical and empirical studies. Literature has also addressed the strategic effect of incentives, in

  17. Effective Conveyor Belt Inspection for Improved Mining Productivity

    Energy Technology Data Exchange (ETDEWEB)

    Chris Fromme

    2006-06-01

    This document details progress on the project entitled ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2004 to May 14, 2004. Highlights include fabrication of an improved LED lightbar, fabrication of a line-scan sensor head for the Smart-Camera based prototype, and development of prototype vulcanized splice detection algorithms.

  18. Improvement of FK506 production by synthetic biology approaches.

    Science.gov (United States)

    Fu, Li-Feng; Tao, Yang; Jin, Mei-Ying; Jiang, Hui

    2016-12-01

    Synthetic biology has been applied to direct improvement of valuable metabolite productions. Tacrolimus (FK506), a clinically used immunosuppressive agent isolated from many Streptomyces, is produced by fermentation in industry. Here we chose FK506 as an example to review recent progress in improving FK506 production, including enhancing transcription levels of biosynthetic genes, accelerating post-translational modification levels of biosynthetic enzymes, increasing activities of rate limiting enzymes, and rational supplement of limited precursors. FK506 production was increased from 25 % to sevenfold by these synthetic biology approaches.

  19. An Improved Production Activity Control Architecture for Shop Floor Control

    Institute of Scientific and Technical Information of China (English)

    SHAHIDIkramullahButt; SUNHou-fang; HAMIDUllahKhanNiazi

    2005-01-01

    This paper presents a further improved Production Activity Control Architecture to deal with the complexity of information by creating Sub-Producers and Sub-Movers which will not only give a better control at workstation level but also reduce load on the Dispatcher. It also makes an analysis of the basic and improved PAC (Production Activity Control) Architecture in the Control System for Integrated Manufacturing. The PAC Architecture and the improvement will further enhance the flexibility and adaptability of the architecture in the ever changing environment of the Shop Floor Control (SFC) Systems.

  20. Pretreatment of paper tube residuals for improved biogas production.

    Science.gov (United States)

    Teghammar, Anna; Yngvesson, Johan; Lundin, Magnus; Taherzadeh, Mohammad J; Horváth, Ilona Sárvári

    2010-02-01

    Paper tube residuals, which are lignocellulosic wastes, have been studied as substrate for biogas (methane) production. Steam explosion and nonexplosive hydrothermal pretreatment, in combination with sodium hydroxide and/or hydrogen peroxide, have been used to improve the biogas production. The treatment conditions of temperature, time and addition of NaOH and H(2)O(2) were statistically evaluated for methane production. Explosive pretreatment was more successful than the nonexplosive method, and gave the best results at 220 degrees C, 10 min, with addition of both 2% NaOH and 2% H(2)O(2). Digestion of the pretreated materials at these conditions yielded 493 N ml/g VS methane which was 107% more than the untreated materials. In addition, the initial digestion rate was improved by 132% compared to the untreated samples. The addition of NaOH was, besides the explosion effect, the most important factor to improve the biogas production.

  1. Selection of productivity improvement techniques via mathematical modeling

    Directory of Open Access Journals (Sweden)

    Mahassan M. Khater

    2011-07-01

    Full Text Available This paper presents a new mathematical model to select an optimal combination of productivity improvement techniques. The proposed model of this paper considers four-stage cycle productivity and the productivity is assumed to be a linear function of fifty four improvement techniques. The proposed model of this paper is implemented for a real-world case study of manufacturing plant. The resulted problem is formulated as a mixed integer programming which can be solved for optimality using traditional methods. The preliminary results of the implementation of the proposed model of this paper indicate that the productivity can be improved through a change on equipments and it can be easily applied for both manufacturing and service industries.

  2. Improving heterologous polyketide production in Escherichia coli by transporter engineering.

    Science.gov (United States)

    Yang, Jingya; Xiong, Zhi-Qiang; Song, Shu-Jie; Wang, Jian-Feng; Lv, Hua-Jun; Wang, Yong

    2015-10-01

    Expelling heterologous compounds out of hosts by transporters is a potential strategy to enhance product titers in microbial cell factories. In this work, to increase heterologous polyketide 6-deoxyerythronolide B (6dEB, erythromycin precursor) production, tripartite multidrug efflux pumps MacAB-TolC, AcrAB-TolC, MdtEF-TolC, and MexAB-OprM were modulated in a 6dEB production strain. Compared with the control, overexpression of a single component of efflux pumps (except oprM) repressed 6dEB production, but modulation of two components MacA and MacB or the complete pumps MacAB-TolC and MdtEF-TolC significantly improved 6dEB titer by 100 ± 11, 118 ± 54, and 98 ± 12 %, respectively. In addition, to avoid the challenging fine-tuning components of pumps, the transcriptional regulators of efflux pumps were modulated to improve the 6dEB production. Overexpression of RpoH (activator of MdtEF-TolC) and EvgA (activator of EmrKY-TolC and AcrAD-TolC) strongly increased 6dEB titer by 152 ± 54 and 142 ± 85 %, respectively. This is the first report of transporter engineering for improving heterologous polyketide production in Escherichia coli. Our results provide an effective strategy for improving the yield of the heterologous products in chassis cell.

  3. A model to design effective Production Improvement Programs

    Directory of Open Access Journals (Sweden)

    T. Bautista

    2010-04-01

    Full Text Available The objective of this paper is to present a model to design effective Production Improvement Programs (PIP in order tocontribute in the solution of the problematic situations generally faced by the Mexican manufacturing micro, small and mediumsizedenterprises (M‐SME. In this proposal, we imply that facilitating their development is a natural way to improve theirperformance, especially in terms of productive efficiency. The study picked up empirical evidence from the ProcessesReengineering Workshop (PRW, one of the leading services of the National Committee of Productivity and TechnologicalInnovation (NCPTI which is considered a Mexican successful case. We show through a comparative analysis that it is possible tohave better programs when they follow a continuous improvement process involving the owner of the firm and workforceparticipation. Furthermore, we suggest a series of methods for planning, structuring and improvement according to theimitative, tacit and qualitative M‐SME specific competence.

  4. Improving the sustainability of global meat and milk production.

    Science.gov (United States)

    Salter, Andrew M

    2017-02-01

    Global demand for meat and dairy products has increased dramatically in recent decades and, through a combination of global population growth, increased lifespan and improved economic prosperity in the developing world will inevitably continue to increase. The predicted increases in livestock production will put a potentially unsustainable burden on global resources, including land for production of crops required for animal feed and fresh water. Furthermore, animal production itself is associated with greenhouse gas production, which may speed up global warming and thereby impact on our ability to produce food. There is, therefore, an urgent need to find methods to improve the sustainability of livestock production. This review will consider various options for improving the sustainability of livestock production with particular emphasis on finding ways to replace conventional crops as sources of animal feeds. Alternatives, such as currently underutilised crops (grown on a marginal land) and insects, reared on substrates not suitable for direct consumption by farm animals, represent possible solutions. Coupled with a moderation of excessive meat consumption in wealthier countries, such strategies may secure the long-term sustainability of meat and milk production and mitigate against the adverse health effects of excessive intake.

  5. A Feedback-Based Secure Path Approach for Wireless Sensor Network Data Collection

    Directory of Open Access Journals (Sweden)

    Guiyi Wei

    2010-10-01

    Full Text Available The unattended nature of wireless sensor networks makes them very vulnerable to malicious attacks. Therefore, how to preserve secure data collection is an important issue to wireless sensor networks. In this paper, we propose a novel approach of secure data collection for wireless sensor networks. We explore secret sharing and multipath routing to achieve secure data collection in wireless sensor network with compromised nodes. We present a novel tracing-feedback mechanism, which makes full use of the routing functionality of wireless sensor networks, to improve the quality of data collection. The major advantage of the approach is that the secure paths are constructed as a by-product of data collection. The process of secure routing causes little overhead to the sensor nodes in the network. Compared with existing works, the algorithms of the proposed approach are easy to implement and execute in resource-constrained wireless sensor networks. According to the result of a simulation experiment, the performance of the approach is better than the recent approaches with a similar purpose.

  6. TECHNICAL AND ORGANIZATIONAL IMPROVEMENTS OF PACKAGING PRODUCTION PROCESS

    Directory of Open Access Journals (Sweden)

    Anna Rudawska

    2016-06-01

    Full Text Available Due to customer driven economies, today’s world markets are characterized by high fluctuations in market demand and the frequent arrival of new technologies and new products. To stay competitive in such markets manufacturing companies require continuous improvements both in technical and organizational areas of their activity. The paper presents results of the diagnosis provided in the manufacturing area of the company producing cardboard packages and recommendations to make the production process more efficient. Especially, among the proposed technical and organizational recommendations the most important ones are: automation of certain elements of the production process and changes in production plant layout.

  7. Improving livestock production through co-operative societies

    Directory of Open Access Journals (Sweden)

    M.A. Umaru

    2013-03-01

    Full Text Available This paper reviews the positive role livestock Co-operatives can play in enhancing animal production. Livestock Co-operative Societies such as those for Artificial insemination, Dairy, Beef and Poultry production have been discussed. The paper also dwells on the benefits derivable from such organisations. The practice of Co-operative Societies in livestock production has been applied by different countries in different livestock sub-sectors. This paper concludes that establishing such Co-operatives will significantly improve livestock production in Nigeria.

  8. 基于改进蚁群算法的无线Mesh网QoS路由算法研究%Research of QoS Routing Algorithm of Wireless Mesh Network Based on Improved Ant-colony Algorithm

    Institute of Scientific and Technical Information of China (English)

    王霄; 吴开军

    2011-01-01

    目前,无线Mesh网络正成为无线网络研究中的一个热点.Quality of service (QoS)是无线Mesh网络中的一个非常重要问题,而QoS路由技术是解决这一问题的关键技术之一.本文就蚁群算法进行研究和改进,并将改进后的算法应用于无线Mesh网络QoS路由问题,进而提出了无线Mesh网络QoS路由算法,通过实验证明该算法能够对QoS提供较好的支持.%Currently, the wireless Mesh network is a hot spot of wireless network research. In wireless Mesh network,QoS is an important issue, and QoS routing is the key technology to solve this problem. In this paper, we proposed a wireless Mesh network QoS routing algorithm on Improved ant colony algorithm, and our experimental results shows that it can provide better QoS support.

  9. Testing improvements in the chocolate traceability system: Impact on product recalls and production efficiency

    DEFF Research Database (Denmark)

    Saltini, Rolando; Akkerman, Renzo

    2012-01-01

    hypothetical improvements of the traceability system within the chocolate production system and supply chain and we illustrate the resulting benefits by using a case study. Based on the case study, we quantify the influence of these improvements on production efficiency and recall size in case of a safety...... crisis by developing a simulation tool. These results are aimed to illustrate and quantify the additional benefits of traceability information, and could help food industries in deciding whether and how to improve their traceability systems....

  10. Proposal of Wireless Traffic Control Schemes for Wireless LANs

    Science.gov (United States)

    Hiraguri, Takefumi; Ichikawa, Takeo; Iizuka, Masataka; Kubota, Shuji

    This paper proposes two traffic control schemes to support the communication quality of multimedia streaming services such as VoIP and audio/video over IEEE 802.11 wireless LAN systems. The main features of the proposed scheme are bandwidth control for each flow of the multimedia streaming service and load balancing between access points (APs) of the wireless LAN by using information of data link, network and transport layers. The proposed schemes are implemented on a Linux machine which is called the wireless traffic controller (WTC). The WTC connects a high capacity backbone network and an access network to which the APs are attached. We evaluated the performance of the proposed WTC and confirmed that the communication quality of the multimedia streaming would be greatly improved by using this technique.

  11. [Development of Bluetooth wireless sensors].

    Science.gov (United States)

    Moor, C; Schwaibold, M; Roth, H; Schöchlin, J; Bolz, A

    2002-01-01

    Wireless communication could help to overcome current obstacles in medical devices and could enable medical services to offer completely new scenarios in health care. The Bluetooth technology which is the upcoming global market leader in wireless communication turned out to be perfectly suited not only for consumer market products but also in the medical environment [1]. It offers a low power, low cost connection in the medium range of 1-100 m with a bandwidth of currently 723.2 kbaud. This paper describes the development of a wireless ECG device and a Pulse Oximeter. Equipped with a Bluetooth port, the measurement devices are enabled to transmit data between the sensor and a Bluetooth-monitor. Therefore, CSR's Bluetooth protocol embedded two-processor and embedded single-processor architecture has been used.

  12. Improving productivity and firm performance with enterprise resource planning

    Science.gov (United States)

    Beheshti, Hooshang M.; Beheshti, Cyrus M.

    2010-11-01

    Productivity is generally considered to be the efficient utilisation of organisational resources and is measured in terms of the efficiency of a worker, company or nation. Focusing on efficiency alone, however, can be harmful to the organisation's long-term success and competitiveness. The full benefits of productivity improvement measures are realised when productivity is examined from two perspectives: operational efficiency (output/input) of an individual worker or a business unit as well as performance (effectiveness) with regard to end user or customer satisfaction. Over the years, corporations have adopted new technology to integrate business activities in order to achieve both effectiveness and efficiency in their operations. In recent years, many firms have invested in enterprise resource planning (ERP) in order to integrate all business activities into a uniform system. The implementation of ERP enables the firm to reduce the transaction costs of the business and improve its productivity, customer satisfaction and profitability.

  13. How can we improve the environmental sustainability of poultry production?

    Science.gov (United States)

    Leinonen, Ilkka; Kyriazakis, Ilias

    2016-08-01

    The review presents results of recent life cycle assessment studies aiming to quantify and improve the environmental performance of UK poultry production systems, including broiler meat, egg and turkey meat production. Although poultry production has been found to be relatively environmentally friendly compared with the production of other livestock commodities, it still contributes to environmental impacts, such as global warming, eutrophication and acidification. Amongst different sub-processes, feed production and transport contributes about 70 % to the global warming potential of poultry systems, whereas manure management contributes about 40-60 % to their eutrophication potential and acidification potential, respectively. All these impacts can be reduced by improving the feed efficiency, either by changing the birds through genetic selection or by making the feed more digestible (e.g. by using additives such as enzymes). However, although genetic selection has the potential to reduce the resources needed for broiler production (including feed consumption), the changing need of certain feed ingredients, most notably protein sources as a result of changes in bird requirements may limit the benefits of this strategy. The use of alternative feed ingredients, such as locally grown protein crops and agricultural by-products, as a replacement of South American grown soya, can potentially also lead to improvements in several environmental impact categories, as long as such feeding strategies have no negative effect on bird performance. Other management options, such as improving poultry housing and new strategies for manure management have also the potential to further improve the environmental sustainability of the poultry industries in Europe.

  14. Combining Overall equipment Efficiency (OEE) and productivity measures as drivers for production improvements

    OpenAIRE

    Andersson, Carin; Bellgran, Monica

    2011-01-01

    To compete on a globalized market companies need to constantly improve the performance in their manufacturing systems. Production performance measures can be used for different purposes, by practitioners they are commonly used for follow-up and reporting purposes. Two of the most commonly used performance measures are Overall Equipment Efficiency (OEE) and productivity. Between these two productivity exhibits the far most variety in definition. Even if OEE and productivity are strongly affect...

  15. Low-Power Wireless Sensor Network Infrastructures

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg

    , and network management which enables construction of low-power wireless sensor network applications. More specifically, these services are designed with the extreme low-power scenarios of the SensoByg project in mind and are implemented as follows. First, low-power communication is implemented with Auto......Advancements in wireless communication and electronics improving form factor and hardware capabilities has expanded the applicability of wireless sensor networks. Despite these advancements, devices are still limited in terms of energy which creates the need for duty-cycling and low-power protocols...... in order to achieve the wanted lifetimes. Through more than a decade of wireless sensor network research, progress towards realizing wanted lifetimes have been made and wireless standards for packet formatting and routing have been proposed. With standards in place, the wide-span between programming...

  16. Low-Power Wireless Sensor Network Infrastructures

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg

    environments and communication primitives in wireless sensor network and traditional network development are closing. However, fundamental differences in wireless technology and energy constraints are still to be considered at the lower levels of the software stack. To fulfill energy requirements hardware......Advancements in wireless communication and electronics improving form factor and hardware capabilities has expanded the applicability of wireless sensor networks. Despite these advancements, devices are still limited in terms of energy which creates the need for duty-cycling and low-power protocols......, and network management which enables construction of low-power wireless sensor network applications. More specifically, these services are designed with the extreme low-power scenarios of the SensoByg project in mind and are implemented as follows. First, low-power communication is implemented with Auto...

  17. Improvement of the Biogas Production Process : Explorative project (EP1)

    OpenAIRE

    Karlsson, Anna; Björn, Annika; Sepehr, Shakeri Yekta; Svensson, Bo

    2014-01-01

    There are several ways to improve biogas production in anaerobic digestion processes and a number of strategies may be chosen. Increased organic loading in existing plants will in most cases demand the introduction of new substrate types. However, to substantially increase the Swedish biogas production new, large-scale biogas plants digesting new substrate types need to be established. Better utilization of existing digester volumes can be linked to:  Increase of organic loading rates and/or ...

  18. CONTRIBUTION TO THE IMPROVEMENT OF PRODUCTS QUALITY IN BAKING INDUSTRY

    OpenAIRE

    Aleksandar Marić; Slavko Arsovski; Jasna Mastilović

    2009-01-01

    Food industry occupies special place in the processing industry, especially when we talk on the manufacturing of bakery products. Variable products quality on the market initiated the authors of this study to make an attempt, using comparative analysis of methods for quality control that are at most applied in bakery plants and other "convenient" methods to indicate the shortcomings and to argue convenience of using of methods that would improve testing of the quality. That approach could cre...

  19. CONTRIBUTION TO THE IMPROVEMENT OF PRODUCTS QUALITY IN BAKING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Aleksandar Marić

    2009-09-01

    Full Text Available Food industry occupies special place in the processing industry, especially when we talk on the manufacturing of bakery products. Variable products quality on the market initiated the authors of this study to make an attempt, using comparative analysis of methods for quality control that are at most applied in bakery plants and other "convenient" methods to indicate the shortcomings and to argue convenience of using of methods that would improve testing of the quality. That approach could create a base for designing of model of quality improvement the baking industry.

  20. WIRELESS FLOPPY DISK DRIVE USING TURBO CODEC IN HOME AND OFFICE WIRELESS LAN

    Institute of Scientific and Technical Information of China (English)

    Kazi Takpaya

    2003-01-01

    A wireless floppy disk drive is proposed for home and office wireless local area network. The proposed floppy drive uses turbo coding-decoding in the transceiver PHYsical layer (PHY) to improve system performance. The data transmission rate is about 11 Mbps. The covered distance is 30 meters in obstructed environment and 100 m in free space.

  1. Engineering Escherichia coli for improved ethanol production from gluconate.

    Science.gov (United States)

    Hildebrand, Amanda; Schlacta, Theresa; Warmack, Rebeccah; Kasuga, Takao; Fan, Zhiliang

    2013-10-10

    We report on engineering Escherichia coli to produce ethanol at high yield from gluconic acid (gluconate). Knocking out genes encoding for the competing pathways (l-lactate dehydrogenase and pyruvate formate lyase A) in E. coli KO11 eliminated lactate production, lowered the carbon flow toward acetate production, and improved the ethanol yield from 87.5% to 97.5% of the theoretical maximum, while the growth rate of the mutant strain was about 70% of the wild type. The corresponding genetic modifications led to a small improvement of ethanol yield from 101.5% to 106.0% on glucose. Deletion of the pyruvate dehydrogenase gene (pdh) alone improved the ethanol yield from 87.5% to 90.4% when gluconate was a substrate. The growth rate of the mutant strain was identical to that of the wild type. The corresponding genetic modification led to no improvements on ethanol yield on glucose.

  2. Assessing customer satisfaction for improving NOAA's climate products and services

    Science.gov (United States)

    Meyers, J. C.; Hawkins, M. D.; Timofeyeva, M. M.

    2009-12-01

    NOAA's National Weather Service (NWS) Climate Services Division (CSD) is developing a comprehensive climate user requirements process with the ultimate goal of producing climate services that meet the needs of NWS climate information users. An important part of this effort includes engaging users through periodical surveys conducted by the Claes Fornell International (CFI) Group using the American Customer Satisfaction Index (ACSI). The CFI Group conducted a Climate Services Satisfaction (CSS) Survey in May of 2009 to measure customer satisfaction with current products and services and to gain insight on areas for improvement. The CSS Survey rates customer satisfaction on a range of NWS climate services data and products, including Climate Prediction Center (CPC) outlooks, drought monitoring, and ENSO monitoring and forecasts, as well as NWS local climate data services. In addition, the survey assesses the users of the products to give the NWS insight into its climate customer base. The survey also addresses specific topics such as NWS forecast category names, probabilistic nature of climate products, and interpretation issues. The survey results identify user requirements for improving existing NWS climate services and introducing new ones. CSD will merge the survey recommendations with available scientific methodologies and operational capabilities to develop requirements for improved climate products and services. An overview of the 2009 survey results will be presented, such as users' satisfaction with the accuracy, reliability, display and functionality of products and services.

  3. Leveraging management information in improving call centre productivity

    OpenAIRE

    Manthisana Mosese; Martie Mearns

    2016-01-01

    Background: The availability and efficient use of management information is one of the key strategic levers in driving growth and competitiveness for companies. Management information facilitates vital decision making that assists organisations in improving their competitiveness. For call centre operations, competitiveness entails improving productivity and customer service, and management information is essential in this endeavour.Objectives: This research explored the use of management info...

  4. Design and Implementation of a Communication Protocol to Improve Multimedia QoS and QoE in Wireless Ad Hoc Networks

    OpenAIRE

    Díaz Santos, Juan Ramón

    2016-01-01

    [EN] This dissertation addresses the problem of multimedia delivery over multi-hop ad hoc wireless networks, and especially over wireless sensor networks. Due to their characteristics of low power consumption, low processing capacity and low memory capacity, they have major difficulties in achieving optimal quality levels demanded by end users in such communications. In the first part of this work, it has been carried out a study to determine the behavior of a variety of multimedia streams...

  5. Improvement of Similarity Measure: Pearson Product-Moment Correlation Coefficient

    Institute of Scientific and Technical Information of China (English)

    LIUYong-suo; MENGQing-hua; CHENRong; WANGJian-song; JIANGShu-min; HUYu-zhu

    2004-01-01

    Aim To study the reason of the insensitiveness of Pearson preduct-moment correlation coefficient as a similarity measure and the method to improve its sensitivity. Methods Experimental and simulated data sets were used. Results The distribution range of the data sets influences the sensitivity of Pearson product-moment correlation coefficient. Weighted Pearson product-moment correlation coefficient is more sensitive when the range of the data set is large. Conclusion Weighted Pearson product-moment correlation coefficient is necessary when the range of the data set is large.

  6. 无线传感器网络节能算法的优化研究%Research on Improvement Wireless Sensor Network S- MAC Protocol

    Institute of Scientific and Technical Information of China (English)

    汪华斌; 蔡昭权

    2011-01-01

    Serious energy constraints exist in wireless sensor network.Traditional.S - MAC algorithm has the problems such as node conflict, the energy waste of sensor nodes caused by fixed load setting duty ratio and short network survival time.In order to save energy and prolong the network life time, a kind of efficient and energy - saving media access control (MAC) H - algorithm is put forward.H - MAC introduces the competition mechanism convergency trees and double scheduling to settle the conflicts between nodes of S - MAC algorithm, and by the dynamic allocation placeholder instead of the fixed duty of MAC - S, the network nodes can adapt to the dynamic changes of traffic load.Simulation is carried out with NS2.The results show that compared with S - MAC, the energy efficiency of the improved H - MAC algorithm is increased by 20%, and the conflict rate of between nodes is reduced, which extends the survival time of wireless sensor network.%无线传感器网络存在严重的能量约束问题,针对传统S-MAC算法存在节点冲突、固定负载设定占空比导致感器节点的能量浪费,从而导致网络生存时间短的难题.为了节约能量、延长网络的生存时间,提出一种高效、节能的媒体接入控制算法(H-MAC).H-MAC引入数据会聚树、双调度竞争机制来改进S-MAC算法节点之间的冲突,通过将S-MAC的固定占空改为动态占位节点分配方式,使其能适应网络流量负载动态变化.最后通过NS2仿真工具对H-MAC进行了仿真.仿真结果表明,相对S-MAC来说,通过改进的H-MAC算法的节能效率提高了20%,降低了节点之间的冲突率,从而延长了整个无线传感器网络的生存时间.

  7. 基于无线Mesh网路由协议的研究及优化%Study and improve of routing protocols for wireless Mesh networks

    Institute of Scientific and Technical Information of China (English)

    朱昌洪

    2012-01-01

    Based on the structural features of wireless Mesh networks, the paper analyses the present routing protocol and proposes I-AODV to improve the AODV routing protocol which has the disadvantage of mueh network delay. A table-driven mechanism is introduced in AODV to increase neighbor point and gets more routing information for the purpose to reduce network latency. Finally, a network simulation platform is built by using NS-2 software. Simulation experiments results show that I-AODV network algorithm has better performance than AODV such as network delay and so on.%根据无线Mesh网络的结构特点,对现有的路由协议进行了分析,并针对其中一种典型的路由协议AODV延时过大的缺点进行了优化,即I—AODV。其在AODV中引入表驱动的机制,增加维护的邻居节点数目,获得更多节点的路由信息,在路由建立时达到降低网络延时的目的。最后通过仿真软件NS-2进行了模拟测试,测试结果表明,I—AODV的网络延时等网络性能明显得到了改善。

  8. 无线局域网退避算法的研究与改进%Research on the Improvement of Back-off Algorithm for Wireless LAN

    Institute of Scientific and Technical Information of China (English)

    陆彩霞

    2015-01-01

    针对无线网络在传输速率、覆盖范围及稳定性等方面的缺陷,本文从IEEE 802.11MAC协议的 CSMA/CA 机制出发,总结了传统退避算法的优缺点,引入了一种新的退避算法,计算机仿真实验表明,新算法能显著提高网络的吞吐量,完善了无线网络运行性能。%Due to defects of the wireless’shortages on transmission rate, coverage and stability. this paper start from the CSMA / CA mechanism of IEEE 802.11MAC protocol, and summarizes the advantages and disadvantages of various typical back-off algorithms,based on this, it introduces a new back-off algorithm,computer simulation experiments show that the proposed algorithm can improve the network throughput ,and benefit for the performance of the wireless network.

  9. Challenges in biobutanol production: How to improve the efficiency?

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Veronica; Paekkilae, Johanna; Muurinen, Esa; Keiski, Riitta L. [Mass and Heat Transfer Process Laboratory, Department of Process and Environmental Engineering, POB 4300, FI-90014 University of Oulu, Oulu (Finland); Ojamo, Heikki [Bioprocess Engineering Laboratory, Department of Process and Environmental Engineering, POB 4300, FI-90014 University of Oulu, Oulu (Finland)

    2011-02-15

    There is an increasing interest in the production of chemicals and fuels from renewable resources due to the continuing price increase of fossil resources, the insecurity of the availability of fossil resources in the future, and additionally environmental concerns and legislations. Biobutanol may be produced by the acetone-butanol-ethanol (ABE) fermentation. This paper reviews the biobutanol production bringing up the problems and challenges to overcome. The aim of the paper is to help in finding opportunities to make the process feasible in the near future. The analysis stresses the idea of improving the efficiency of the fermentation stage by altering the up (pretreatment of the raw material) and downstream (product recovery and purification) processes. The paper also explores the biobutanol production from the biorefinery perspective. Finally the review brings up the important role of research in developing and implementing the production of biobutanol by the ABE fermentation. (author)

  10. Improving animal health and livestock productivity to reduce poverty.

    Science.gov (United States)

    Pradère, J-P

    2014-12-01

    This study is based on scientific publications, statistics and field observations. It shows the importance of livestock in the economy and in the risk management strategies implemented by poor farming households. A comparison of livestock performance trends with the evolution of rural poverty in developing countries indicates that growth in livestock production alone is not enough to reduce rural poverty. To help reduce poverty, sustainable production should be based on productivity gains. Prerequisites for improving productivity include better public policies, enhanced research and the reduction of animal disease risk. The study draws attention to the economic, social and environmental consequences of inadequate support for animal health and production in the least developed countries, especially those of sub-Saharan Africa.

  11. The lifetime production of Bovec and Improved Bovec sheep breeds

    Directory of Open Access Journals (Sweden)

    Gregor Gorjanc

    2009-06-01

    Full Text Available Production data of Bovec and Improved (with East-Friesian Bovec sheep born between years 1989 and 2006 were used for the analysis of culling dynamics and lifetime production. Lifetime production was calculated as the sum of production at each lambing (number of born and liveborn lambs and litter birth weight, weaning (number of weaned lambs and litter weaning weight or during each lactation (milk yield, fat (6.5 % and protein (5.8 % corrected milk yield (FPC; Pulina et al., 2005., and fat and protein yield for culled sheep. Animals with any missing records from the first till the last lambing, weaning or lactation were removed from the analysis. Animals that left the system of animal recording alive, due to selling or the cancellation of recording by a breeder were also excluded. Dataset included records for 2254 sheep: 1734 of Bovec and 520 of Improved Bovec breed. Data preparation and statistical analysis were performed with the use of a statistical program R (R Development Core Team, 2007. and additional packages Zelig (Imai et al., 2007; Bailey and Alimadhi, 2007; Imai et al., 2008 and lme4 (Bates and DebRoy, 2004; Bates, 2007. Results have shown that in the period ≤1996 Bovec breed had on average 4.4 lactations in their lifetime, which was almost one lactation more than in Improved Bovec breed. In the period after the year 1996 the highest proportion of animals were culled in the first lactation (as expected due to culling dynamics, with slightly higher proportion in Improved Bovec breed than in Bovec breed. Lifetime number of born, liveborn and weaned lambs was higher for about one lamb in Improved Bovec breed. Lifetime lamb weight gain did not differ between breeds, due to the high frequency of early weaning in Improved Bovec breed. During lifetime, Improved Bovec sheep produced around 200 kg (~34 % more milk, around 190 kg (~32 % more FPC milk, around 12 kg (~32 % more milk fat, and around 10 kg (~34 % more milk protein than Bovec

  12. PRODUCTIVITY IMPROVEMENT IN BREWERIES THROUGH LINE BALANCING USING HEURISTIC METHOD

    Directory of Open Access Journals (Sweden)

    OSUYA EMEKE GREAT

    2013-03-01

    Full Text Available This paper presents a heuristic procedure for improving productivity in breweries companies. A case study of Champion brewery Plc, Uyo, Akwa Ibom State was adopted. The aim of this paper is to balance theProduction line of Champion lager beer. In the course of line balancing, the idle time and the number of workstations on the production line was minimized so as to maximize the efficiency of the production line. All the required data was measured and the parameters such as elapsed time at each work station, efficiencies,number of workers, time of each of the workstations etc. was calculated from the existing line. A new heuristic approach, the Longest Operation Time (LOT method was used in designing the new production line. After set up of the new production line, the cost of production and effectiveness of the new line was computed and compared with those of the existing one. The new production line was found to have been increased by a significant amount reducing the overall production cost per unit.

  13. An Improved DV-Hop Localization Algorithm for Wireless Sensor Network%WSN中一种改进的DV-Hop节点定位算法

    Institute of Scientific and Technical Information of China (English)

    史洪宇; 燕莎

    2011-01-01

    DV-Hop算法是一种经典的距离无关的无线传感器网络节点定位算法.详细分析了DV-Hop算法的定位过程,针对其局限性提出一种改进的DV-Hop算法.该改进算法在传统DV-Hop算法的第一阶段采用分簇策略以减小通信开销和分组冲突概率,并且用拟牛顿优化算法代替传统的最小二乘法计算节点位置,最后用Matlab7.0进行仿真.仿真结果表明,该改进算法可明显提高节点定位精度.并且不会增加网络通信量.%DV-Hop algorithm is a classical range-free localization algorithm used for node locating of wireless sensor network. After analyzing the localization principle and limitation of DV-Hop algorithm, the authors proposed an improved DV-Hop algorithm. The new algorithm used cluster strategy to reduce communication cost and grouping conflict probability in the first stage, and quasi-Newton optimization method was used instead of the least-square method to estimate the position of nodes. Simulation was made by using Mstlah7.0, and the results show that the improved DV-Hop algorithm can greatly improve the localization accuracy of the unknown nodes without increasing communications traffic.

  14. An integrated model for continuous quality improvement and productivity improvement in health services organizations.

    Science.gov (United States)

    Rakich, J S; Darr, K; Longest, B B

    1993-01-01

    The health services paradigm with respect to quality has shifted to that of conformance to requirements (the absence of defects) and fitness for use (meeting customer expectations and needs). This article presents an integrated model of continuous quality improvement (CQI) (often referred to as total quality management) and productivity improvement for health services organizations. It incorporates input-output theory and focuses on the CQI challenge--"How can we be certain that we do the right things right the first time, every time?" The twin pillars of CQI are presented. Achievement of both will result in productivity improvement and enhancement of the health services organization's competitive position.

  15. Increased office productivity through improved indoor air quality

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2002-01-01

    Building Syndrome (SBS) symptoms and improve the productivity of office workers. In these experiments, the performance of simulated office work (text typing, addition and proof-reading, all typical office tasks requiring concentration) improved monotonically as the proportion of persons dissatisfied......, future developments in HVCAC technology may include "personalized air ", new ways of improving the quality of supply air (e.g., by filtration), more extensive use of heat recovery from exhaust air and systematic selection of low-polluting building and furnishing materials....

  16. 一种基于无线网络的改进自稳定领导者选举算法%An Improved Self-Stabilizing Leader Election Algorithm Based on Wireless Network

    Institute of Scientific and Technical Information of China (English)

    帖军; 刘江; 王晓华

    2015-01-01

    This paper analyses IISLE algorithm, and finds out that IISLE algorithm time complexity is O(n).According to the high disconnection probability of wireless network environment, this paper improves IISLE algorithms, and gives an improved self-stabilizing leader election algorithm based on wireless network ( ISLEABWN) .Combined with the mobile host disconnection probability model, ISLEABWN algorithm modifies the tree expanding mechanism.The emulation experiment results show that the improved algorithm has good performance in wireless network environment.%对IISLE算法进行了分析,IISLE算法的时间复杂度为O( n),针对无线网络环境的高断接概率,改进了IISLE算法,提出了一种适用于无线网络的改进自稳定领导者选举算法(ISLEABWN)。该算法结合移动主机断接概率模型,修改了IISLE算法的树扩展机制。仿真实验结果发现:改进的算法在无线网络环境下具有良好的性能。

  17. Rebalancing Redox to Improve Biobutanol Production by Clostridium tyrobutyricum

    Directory of Open Access Journals (Sweden)

    Chao Ma

    2015-12-01

    Full Text Available Biobutanol is a sustainable green biofuel that can substitute for gasoline. Carbon flux has been redistributed in Clostridium tyrobutyricum via metabolic cell engineering to produce biobutanol. However, the lack of reducing power hampered the further improvement of butanol production. The objective of this study was to improve butanol production by rebalancing redox. Firstly, a metabolically-engineered mutant CTC-fdh-adhE2 was constructed by introducing heterologous formate dehydrogenase (fdh and bifunctional aldehyde/alcohol dehydrogenase (adhE2 simultaneously into wild-type C. tyrobutyricum. The mutant evaluation indicated that the fdh-catalyzed NADH-producing pathway improved butanol titer by 2.15-fold in the serum bottle and 2.72-fold in the bioreactor. Secondly, the medium supplements that could shift metabolic flux to improve the production of butyrate or butanol were identified, including vanadate, acetamide, sodium formate, vitamin B12 and methyl viologen hydrate. Finally, the free-cell fermentation produced 12.34 g/L of butanol from glucose using the mutant CTC-fdh-adhE2, which was 3.88-fold higher than that produced by the control mutant CTC-adhE2. This study demonstrated that the redox engineering in C. tyrobutyricum could greatly increase butanol production.

  18. Improved vanillin production in baker's yeast through in silico design

    DEFF Research Database (Denmark)

    Brochado, Ana Rita; Matos, Cláudia; Møller, Birger L.;

    2010-01-01

    (PDC1 and GDH1) were selected for experimental verification resulting in four engineered strains. Three of the mutants showed up to 1.5 fold higher vanillin beta-D-glucoside yield in batch mode, while continuous culture of the Delta pdc1 mutant showed a 2-fold productivity improvement. This mutant...

  19. IMPROVEMENT OF QUALITY IN PRODUCTION PROCESS BY APPLYING KAIKAKU METHOD

    Directory of Open Access Journals (Sweden)

    Milan Radenkovic

    2013-12-01

    Full Text Available In this paper, Kaikaku method is presented. The essence of this method is introduction, principles and ways of implementation in the real systems. The main point how Kaikaku method influences on quality. It is presented on the practical example (furniture industry, one way how to implement Kaikaku method and how influence on quality improvement of production process.

  20. Can worksite nutritional interventions improve productivity and firm profitability?

    DEFF Research Database (Denmark)

    Jensen, Jørgen Dejgård

    2011-01-01

    ’ nutritional knowledge, food intake and health and on the firm’s profitability, mainly in terms of reduced absenteeism and presenteeism. Conclusions: Well-targeted and efficiently implemented diet-related worksite health promotion interventions may improve labour productivity by 1%–2%. On larger worksites...

  1. Improving radiation use efficiency in greenhouse production systems

    NARCIS (Netherlands)

    Li, Tao

    2015-01-01

    SUMMARY A large increase in agricultural production is needed to feed the increasing world population with their increasing demand per capita. However, growing competition for arable land, water, energy, and the degradation of the environment impose challenges to improve crop produc

  2. Technical improvements in 19th century Belgian window glass production

    Science.gov (United States)

    Lauriks, Leen; Collette, Quentin; Wouters, Ine; Belis, Jan

    Glass was used since the Roman age in the building envelope, but it became widely applied together with iron since the 19th century. Belgium was a major producer of window glass during the nineteenth century and the majority of the produced window glass was exported all over the world. Investigating the literature on the development of 19th century Belgian window glass production is therefore internationally relevant. In the 17th century, wood was replaced as a fuel by coal. In the 19th century, the regenerative tank furnace applied gas as a fuel in a continuous glass production process. The advantages were a clean production, a more constant and higher temperature in the furnace and a fuel saving. The French chemist Nicolas Leblanc (1787-1793) and later the Belgian chemist Ernest Solvay (1863) invented processes to produce alkali out of common salt. The artificial soda ash improved the quality and aesthetics of the glass plates. During the 19th century, the glass production was industrialized, influencing the operation of furnaces, the improvement of raw materials as well as the applied energy sources. Although the production process was industrialized, glassblowing was still the work of an individual. By improving his work tools, he was able to create larger glass plates. The developments in the annealing process followed this evolution. The industry had to wait until the invention of the drawn glass in the beginning of the 20th century to fully industrialise the window glass manufacture process.

  3. The nutrition intervention improved adult human capital and economic productivity.

    Science.gov (United States)

    Martorell, Reynaldo; Melgar, Paul; Maluccio, John A; Stein, Aryeh D; Rivera, Juan A

    2010-02-01

    This article reviews key findings about the long-term impact of a nutrition intervention carried out by the Institute of Nutrition of Central America and Panama from 1969 to 1977. Results from follow-up studies in 1988-89 and 2002-04 show substantial impact on adult human capital and economic productivity. The 1988-89 study showed that adult body size and work capacity increased for those provided improved nutrition through age 3 y, whereas the 2002-04 follow-up showed that schooling was increased for women and reading comprehension and intelligence increased in both men and women. Participants were 26-42 y of age at the time of the 2002-04 follow-up, facilitating the assessment of economic productivity. Wages of men increased by 46% in those provided with improved nutrition through age 2 y. Findings for cardiovascular disease risk factors were heterogeneous; however, they suggest that improved nutrition in early life is unlikely to increase cardiovascular disease risk later in life and may indeed lower risk. In conclusion, the substantial improvement in adult human capital and economic productivity resulting from the nutrition intervention provides a powerful argument for promoting improvements in nutrition in pregnant women and young children.

  4. Adaptive Wireless Transceiver Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Many wireless technologies are already available for sensor applications. It is inevitable that many non-interoperable wireless technologies between 400 MHz and 5.8...

  5. Genome shuffling improved the nucleosides production in Cordyceps kyushuensis.

    Science.gov (United States)

    Wang, Yanming; Zhang, Guoying; Zhao, Xuan; Ling, Jianya

    2017-10-20

    Genome shuffling was first applied to improve the production of nucleosides in Cordyceps kyushuensis. Six improved strains were selected for genome shuffling by UV and HNO2 mutagenesis. Ten improved genome shuffling strains with good genetic stability were obtained, among which, the production of cordycepin in R6 was 9.624 times higher than that of the ancestor. While in R18 and R19, the yield of cordycepin, adenosine, guanosine and uridine were all increased greatly compared with the ancestor. Based on the four phenotypes of the content of cordycepin, adenosine, guanosine and uridine, hierarchical clustering analysis (HCA) and principal component analysis (PCA) were applied to infer the relationships between genome shuffling strains and mutants. Copyright © 2017. Published by Elsevier B.V.

  6. Improving software product line using an ontological approach

    Indian Academy of Sciences (India)

    MEGHA BHUSHAN; SHIVANI GOEL

    2016-12-01

    Software product line (SPL) is an emergent strategy for generating software products. The variability and commonality of SPL is illustrated by feature models (FMs). The quality of software products relies on the correctness of SPL. The overall benefits of software product line engineering (SPLE) are reduced by various kinds of defects such as dead features and false optional features in an FM. These defects can be inherited in the software products built from a defective product line model (PLM). In this paper, the problem of enhancing the quality of software products derived from SPLE is handled. An ontological based approach is proposed following first-order logic (FOL) rules to identify defects namely dead features and false optional features. The classification of cases forthese defects in FMs that represent variability of SPL is defined. The presented approach has been explained with the help of an FM derived from the standard case in product line (PL) community. The initial empirical evaluation of the proposed approach analyses 35 FMs with different sizes. The results obtained exhibit that the proposed approach is accurate, effective, scalable up to 200 features and therefore improves SPL

  7. Lean Manufacturing And Productivity Improvement In Coal Mining

    Directory of Open Access Journals (Sweden)

    Manoj Ade

    2012-05-01

    Full Text Available The economic reforms- Liberalization, Privatization, Globalization, (LPG started in 1991 in India. The main objective of the government was to achieve high economic growth and industrialize the nation for the well-being of Indian citizens. Thus Indian market became Global and open market. Coal industry was not an exception to this phenomena of globalization. The improvement in productivity has become need of coal industry to take the competitive advantage of global market.The challenge to the coal Industry is to identify the wastes and meet the market price by maintaining a good profit. The only solution is to reduce total production cost. Lean manufacturing is a systematic approach to identify and eliminate the waste through continuousimprovements and synchronizing the production process to obtain manufacturing excellence. This can be achieved by Lean thinking (to identify and eliminate wastes and Lean production (to improve efficiency and effectiveness of equipment. Earlier the lean manufacturing concept was limited to manufacturing organizationnow it is used invariably in operation industries.In this paper researcher has applied lean manufacturing concept in order to increase productivity and to minimize the production cost of mining.

  8. Bacterial bioaugmentation for improving methane and hydrogen production from microalgae

    Science.gov (United States)

    2013-01-01

    Background The recalcitrant cell walls of microalgae may limit their digestibility for bioenergy production. Considering that cellulose contributes to the cell wall recalcitrance of the microalgae Chlorella vulgaris, this study investigated bioaugmentation with a cellulolytic and hydrogenogenic bacterium, Clostridium thermocellum, at different inoculum ratios as a possible method to improve CH4 and H2 production of microalgae. Results Methane production was found to increase by 17?~?24% with the addition of C. thermocellum, as a result of enhanced cell disruption and excess hydrogen production. Furthermore, addition of C. thermocellum enhanced the bacterial diversity and quantities, leading to higher fermentation efficiency. A two-step process of addition of C. thermocellum first and methanogenic sludge subsequently could recover both hydrogen and methane, with a 9.4% increase in bioenergy yield, when compared with the one-step process of simultaneous addition of C. thermocellum and methanogenic sludge. The fluorescence peaks of excitation-emission matrix spectra associated with chlorophyll can serve as biomarkers for algal cell degradation. Conclusions Bioaugmentation with C. thermocellum improved the degradation of C. vulgaris biomass, producing higher levels of methane and hydrogen. The two-step process, with methanogenic inoculum added after the hydrogen production reached saturation, was found to be an energy-efficiency method for hydrogen and methane production. PMID:23815806

  9. Guide for prioritizing power plant productivity improvement projects: handbook of availability improvement methodology

    Energy Technology Data Exchange (ETDEWEB)

    1981-09-15

    As part of its program to help improve electrical power plant productivity, the Department of Energy (DOE) has developed a methodology for evaluating productivity improvement projects. This handbook presents a simplified version of this methodology called the Availability Improvement Methodology (AIM), which provides a systematic approach for prioritizing plant improvement projects. Also included in this handbook is a description of data taking requirements necessary to support the AIM methodology, benefit/cost analysis, and root cause analysis for tracing persistent power plant problems. In applying the AIM methodology, utility engineers should be mindful that replacement power costs are frequently greater for forced outages than for planned outages. Equivalent availability includes both. A cost-effective ranking of alternative plant improvement projects must discern between those projects which will reduce forced outages and those which might reduce planned outages. As is the case with any analytical procedure, engineering judgement must be exercised with respect to results of purely mathematical calculations.

  10. Wireless communication technology NFC

    OpenAIRE

    MÁROVÁ, Kateřina

    2014-01-01

    Aim of this bachelor thesis is to handle the issue of new wireless communication technology NFC (Near Field Communication) including a comparison of advantages and disadvantages of NFC with other wireless technologies (Bluetooth, Wi-Fi, etc.). NFC is a technology for wireless communications between different electronic devices, one of which is typically a mobile phone. Near Field Communication allows wireless communication at very short distance by approaching or enclosing two devices and can...

  11. Wireless ATM : handover issues

    OpenAIRE

    Jiang, Fan; Käkölä, Timo

    1998-01-01

    Basic aspects of cellular systems and the ATM transmission technology are introduced. Wireless ATM is presented as a combination of radio ATM and mobile ATM. Radio ATM is a wireless extension of an ATM connection while mobile ATM contains the necessary extensions to ATM to support mobility. Because the current ATM technology does not support mobility, handover becomes one of the most important research issues for wireless ATM. Wireless ATM handover requirements are thus analysed. A handover s...

  12. IMPROVEMENT AND SIMULATION OF LEACH IN WIRELESS SENSOR NETWORKS%无线传感器网络LEACH算法的改进与仿真

    Institute of Scientific and Technical Information of China (English)

    万传飞; 杜尚丰

    2011-01-01

    LEACH(low energy adaptive clustering hierarchy)是无线传感器网络层次型拓扑控制中最重要和最具代表性的算法之一.分析了LEACH协议的工作原理,并针对其在簇头选择上存在的不足,提出改进:考虑节点的能量和位置状况,通过引入能量、密度和距离调节参数来修正簇头当选阚值,从而选择出综合性能更为优越的节点担任簇首.仿真实验结果显示,改进后的算法在降低能耗、延长网络生存时间以及保证监测覆盖度等方面比LEACH具有更加优良的性能.%LEACH is one of the most important and representative hierarchical topology control protocols in wireless sensor networks.In this paper we analyze the operating principle of LEACH protocol and present an improved algorithm,which takes into account the protocol' s shortcoming in selecting cluster-head, that rectifies the elected threshold of cluster head by introducing energy, density and distance adjust parameters considering the energy and position circumstance of the nodes, hence the node with higher predominance in comprehensive performance is selected to be the cluster head.Simulation results demonstrate that the improved algorithm outperforms the LEACH protocol in performances of energy reduction, network lifetime prolongation and monitoring coverage assurance, etc.

  13. Improvement of Xylanase Production by Cochliobolus sativus in Submerged Culture

    Directory of Open Access Journals (Sweden)

    Yasser Bakri

    2008-01-01

    Full Text Available The xylanase production by a new Cochliobolus sativus Cs5 strain was improved under submerged fermentation. The xylanase was induced by xylan and repressed by glucose, sucrose, maltose, xylose, starch and cellulose. Highest enzyme production (98.25 IU/mL was recorded when wheat straw (4 % by mass per volume was used as a carbon source after 120 h of incubation. NaNO3 increased xylanase production 5.4-fold as compared to the control. Optimum initial pH was found to be 4.5 to 5. The C. sativus Cs5 strain grown under submerged culture in a simple medium proved to be a promising microorganism for xylanase production.

  14. Danish initiatives to improve the safety of meat products

    DEFF Research Database (Denmark)

    Wegener, Henrik Caspar

    2010-01-01

    pathogens which are resistant to antibiotics has been a new area of attention in the recent decade, and recently, the increasing globalization of the domestic food supply has called for a complete rethinking of the national food safety strategies. The implementations of a ‘‘case-by-case” risk assessment......During the last two decades the major food safety problems in Denmark, as determined by the number of human patients, has been associated with bacterial infections stemming from meat products and eggs. The bacterial pathogens causing the majority of human infections has been Salmonella...... and Campylobacter, and to a lesser extent Yersinia, Escherichia coli O157 and Listeria. Danish initiatives to improve the safety of meat products have focused on the entire production chain from the farm to the consumer, with a special emphasis on the pre-harvest stage of production. The control of bacterial...

  15. Improvement of hydrocyclone installations for starch production lines

    Directory of Open Access Journals (Sweden)

    N. R. Andreev

    2016-01-01

    Full Text Available Multicyclonic installations contain up to 15 steps of division (multicyclones. Improvement of work quality at the reduction of quantity of steps of division can be reached by increasing an starch yield from the step with the reduction of an exit of a liquid phase. To achieve that, a connection of three multicyclones according to the cross scheme is used as for a step of division instead of a separate multicyclone. It is shown that at the three multicyclones a step of division of change in redistribution of suspension components is created the design solution of the division step where liquid products are going out with only to liquid ones, and condensed products – only with condensed ones. At this step the starch yield increases in the condensed product while reducing the end product volume; therefore is received in one step the higher quality starch because of its increased quantity in the condensed descent product step. However, at such connection of multicyclones starch gets to a liquid descent of each step, therefore it is condensed additionally to release starch by con-necting of four multicyclones in to one step of division. New multistage multicyclonic installation consists of 12 multicyclones instead of 15 ones. That reduces capital and operational costs. Thus, varying manipulating the scheme of microcyclones connection in the unit, it is possible to receive the required technological result with the improved economic indicators. AllRussian Research Institute of starch products has developed lines of potato processing for dry starch on the basis 10 and 50 t / per day of initial raw materials using hydrocyclone installations. That allows to organize a new production without big capital expenditures. The hydrocyclone design with the changed external way of supply of suspension is developed at which the flow enters the already rotating product to exclude the influence of an inflow on the quality of suspension fractionation.

  16. Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing

    Directory of Open Access Journals (Sweden)

    Yan-Yan Wang

    2011-09-01

    Full Text Available How to design a production process with low carbon emissions and low environmental impact as well as high manufacturing performance is a key factor in the success of low-carbon production. It is important to address concerns about climate change for the large carbon emission source manufacturing industries because of their high energy consumption and environmental impact during the manufacturing stage of the production life cycle. In this paper, methodology for determining a production process is developed. This methodology integrates process determination from three different levels: new production processing, selected production processing and batch production processing. This approach is taken within a manufacturing enterprise based on prior research. The methodology is aimed at providing decision support for implementing Environmentally Benign Manufacturing (EBM and low-carbon production to improve the environmental performance of the manufacturing industry. At the first level, a decision-making model for new production processes based on the Genetic Simulated Annealing Algorithm (GSAA is presented. The decision-making model considers not only the traditional factors, such as time, quality and cost, but also energy and resource consumption and environmental impact, which are different from the traditional methods. At the second level, a methodology is developed based on an IPO (Input-Process-Output model that integrates assessments of resource consumption and environmental impact in terms of a materials balance principle for batch production processes. At the third level, based on the above two levels, a method for determining production processes that focus on low-carbon production is developed based on case-based reasoning, expert systems and feature technology for designing the process flow of a new component. Through the above three levels, a method for determining the production process to identify, quantify, assess, and optimize the

  17. Strategies and tools to improve crop productivity by targeting photosynthesis.

    Science.gov (United States)

    Nuccio, Michael L; Potter, Laura; Stiegelmeyer, Suzy M; Curley, Joseph; Cohn, Jonathan; Wittich, Peter E; Tan, Xiaoping; Davis, Jimena; Ni, Junjian; Trullinger, Jon; Hall, Rick; Bate, Nicholas J

    2017-09-26

    Crop productivity needs to substantially increase to meet global food and feed demand for a rapidly growing world population. Agricultural technology developers are pursuing a variety of approaches based on both traditional technologies such as genetic improvement, pest control and mechanization as well as new technologies such as genomics, gene manipulation and environmental modelling to develop crops that are capable of meeting growing demand. Photosynthesis is a key biochemical process that, many suggest, is not yet optimized for industrial agriculture or the modern global environment. We are interested in identifying control points in maize photoassimilation that are amenable to gene manipulation to improve overall productivity. Our approach encompasses: developing and using novel gene discovery techniques, translating our discoveries into traits and evaluating each trait in a stepwise manner that reflects a modern production environment. Our aim is to provide step change advancement in overall crop productivity and deliver this new technology into the hands of growers.This article is part of the themed issue 'Enhancing photosynthesis in crop plants: targets for improvement'. © 2017 The Author(s).

  18. Improved production of spiramycin by mutant Streptomyces ambofaciens

    Institute of Scientific and Technical Information of China (English)

    金志华; 岑沛霖

    2004-01-01

    Strain improvement and medium optimization to increase the productivity of spiramycin were carried out. Of oil tolerant mutant strains screened, one mutant, Streptomyces ambofaciens XC 2-37, produced 9% more spiramycin than the parent strain S. ambofaciens XC 1-29. The effects of soybean oil and propyl alcohol on spiramycin production with S. ambofaciens XC 2-37 were studied. The potency of S. ambofaciens XC 2-37 was improved by 61.8% with addition of 2% soybean oil in the fermentation medium and 0.4% propyl alcohol at 24 hours after incubation. The suitable time for feeding propyl alcohol is at 24 hours after incubation in flask fermentation and at 20 hours after incubation in fermentor fermentation. The new process with S. ambofaciens XC 2-37 was scaled up for industrial scale production of spiramycin in a 60 m3 fermentor in Xinchang Pharmaceutical Factory, Zhejiang Medicine Company, Ltd., China, and the potency and productivity of fermentation were improved by 42.9%.

  19. Improved production of spiramycin by mutant Streptomyces ambofaciens

    Institute of Scientific and Technical Information of China (English)

    金志华; 岑沛霖

    2004-01-01

    Strain improvement and medium optimization to increase the productivity of spiramycin were carried out. Of oil tolerant mutant strains screened, one mutant, Streptomyces ambofaciens XC 2-37, produced 9% more spiramycin than the parent strain S. ambofaciens XC 1-29. The effects of soybean oil and propyl alcohol on spiramycin production with S.ambofaciens XC 2-37 were studied. The potency orS. ambofaciens XC 2-37 was improved by 61.8% with addition of 2% soybean oil in the fermentation medium and 0.4% propyl alcohol at 24 hours after incubation. The suitable time for feeding propyl alcohol is at 24 hours after incubation in flask fermentation and at 20 hours after incubation in fermentor fermentation The new process with S. ambofaciens XC 2-37 was scaled up for industrial scale production of spiramycin in a 60 m3 fermentor in Xinchang Pharmaceutical Factory, Zhejiang Medicine Company, Ltd., China, and the potency and productivity of fermentation were improved by 42.9%.

  20. Delivering Improved Nutrition: Dairy Ingredients in Food Aid Products.

    Science.gov (United States)

    Schlossman, Nina

    2016-03-01

    The United States has a long history of food assistance for humanitarian need. The Food for Peace Act of 1954 established the United States' permanent food assistance program which has fed over 3 billion people in 150 countries worldwide through thousands of partner organizations. In 60 years, the program has evolved and will continue to do so. Recently, the program has gone from a focus on quantity of food shipped to quality food assistance from improved products, programs, and processes to effectively meet the needs of different vulnerable groups. The current debate focuses on the appropriateness of using fortified blended foods to prevent and treat malnutrition during the first 1000 days of life. Dairy ingredients have been at the center of this debate; they were included initially in fortified blended, removed in the 1980s, and now reincorporated into fortified therapeutic and supplemental foods. Improved quality food baskets and effective nutrition programming to prevent and treat malnutrition were developed through multisectoral collaboration between government and nongovernment organizations. The US Agency for International Development has focused on improving nutrition through development programs often tied to health, education, and agriculture. The years since 2008 have been a particularly intense period for improvement. The Food Aid Quality Review was established to update current food aid programming products, program implementation, cost-effectiveness, and interagency processes. Trials are underway to harmonize the areas of multisectoral nutrition programming and gather more evidence on the effects of dairy ingredients in food aid products.

  1. Improved vanillin production in baker's yeast through in silico design

    Directory of Open Access Journals (Sweden)

    Hansen Jørgen

    2010-11-01

    Full Text Available Abstract Background Vanillin is one of the most widely used flavouring agents, originally obtained from cured seed pods of the vanilla orchid Vanilla planifolia. Currently vanillin is mostly produced via chemical synthesis. A de novo synthetic pathway for heterologous vanillin production from glucose has recently been implemented in baker's yeast, Saccharamyces cerevisiae. In this study we aimed at engineering this vanillin cell factory towards improved productivity and thereby at developing an attractive alternative to chemical synthesis. Results Expression of a glycosyltransferase from Arabidopsis thaliana in the vanillin producing S. cerevisiae strain served to decrease product toxicity. An in silico metabolic engineering strategy of this vanillin glucoside producing strain was designed using a set of stoichiometric modelling tools applied to the yeast genome-scale metabolic network. Two targets (PDC1 and GDH1 were selected for experimental verification resulting in four engineered strains. Three of the mutants showed up to 1.5 fold higher vanillin β-D-glucoside yield in batch mode, while continuous culture of the Δpdc1 mutant showed a 2-fold productivity improvement. This mutant presented a 5-fold improvement in free vanillin production compared to the previous work on de novo vanillin biosynthesis in baker's yeast. Conclusion Use of constraints corresponding to different physiological states was found to greatly influence the target predictions given minimization of metabolic adjustment (MOMA as biological objective function. In vivo verification of the targets, selected based on their predicted metabolic adjustment, successfully led to overproducing strains. Overall, we propose and demonstrate a framework for in silico design and target selection for improving microbial cell factories.

  2. A Wireless Grid in Ubiquitous Broadband Wireless Services for Mega-Event Scenario and its Distributed Power Control

    Directory of Open Access Journals (Sweden)

    Liu Yanjun

    2013-12-01

    Full Text Available Wireless grid can provide consumers ubiquitous broadband wireless services with convenience, robustness and mobility, which is one of the most promising alternatives of fixed wireless access networks. As the deployment of Wide City has accelerated quickly, this study focuses on the key technologies of wireless grid in ubiquitous broadband wireless services, such as antennas, MAC design, channel assignment and interface scheduling. A novel hierarchical wireless network based on WiMax-WiFi grid is proposed for mega-event. As a key enabling technology for wireless grid, a distributed power control algorithm for WiFi AP is proposed in this study to achieve the load balancing and the improvement of network performance.

  3. Improvement of Stand Jig Sealer and Its Increased Production Capacity

    Directory of Open Access Journals (Sweden)

    Soebandrija K. E. N

    2014-03-01

    Full Text Available This paper has the objective to prove that improvement of Stand Jig Sealer can lead to the cycle time target as part of Improvement efforts and its Productivity. Prior researches through prior journals both classics journal such as Quesnay (1766 and Solow (1957 and updated journal such as Reikard (2011 researches, are mentioned and elaborated. Precisely, the research is narrowed down and specified into automotive industry and eventually the software related of SPSS and Structural Equation Modeling ( SEM . The analysis and its method are conducted through the calculation working time. The mentioned calculation are reinforced with the hypothesis test using SPSS Version 19 and involve parameters of production efficiency, productivity calculation, and the calculation of financial investments. The results obtained are augmented achievement of cycle time target ≤ 80 seconds posterior to improvement stand jig sealer. The result from calculation of SPSS-19 version comprise the following aspects: the one-sided hypothesis test is rejection of Ho:μ≥80 seconds, the correlation rs=0.84, regression y = 0.159+0.642x, validity R table = 0.4438, reliability value of Cronbach’s alpha = 0.885>0.70, independence (Chi Square Asymp. Sig=0.0280, PI 2.04>1, IRR 45.56%>i=12.68%, PP=1.86. The Mentioned calculation results support the hypothesis and ultimately align with the objective of this paper to prove that improvement of Stand Jig Sealer and its relation toward the cycle time target. Precisely, the improvement of production capacity of PT. Astra Daihatsu Motor.

  4. Improvement of Stand Jig Sealer and Its Increased Production Capacity

    Science.gov (United States)

    Soebandrija, K. E. N.; Astuti, S. W. D.

    2014-03-01

    This paper has the objective to prove that improvement of Stand Jig Sealer can lead to the cycle time target as part of Improvement efforts and its Productivity. Prior researches through prior journals both classics journal such as Quesnay (1766) and Solow (1957) and updated journal such as Reikard (2011) researches, are mentioned and elaborated. Precisely, the research is narrowed down and specified into automotive industry and eventually the software related of SPSS and Structural Equation Modeling ( SEM ). The analysis and its method are conducted through the calculation working time. The mentioned calculation are reinforced with the hypothesis test using SPSS Version 19 and involve parameters of production efficiency, productivity calculation, and the calculation of financial investments. The results obtained are augmented achievement of cycle time target ≤ 80 seconds posterior to improvement stand jig sealer. The result from calculation of SPSS-19 version comprise the following aspects: the one-sided hypothesis test is rejection of Ho:μ≥80 seconds, the correlation rs=0.84, regression y = 0.159+0.642x, validity R table = 0.4438, reliability value of Cronbach's alpha = 0.885>0.70, independence (Chi Square) Asymp. Sig=0.0280, PI 2.04>1, IRR 45.56%>i=12.68%, PP=1.86). The Mentioned calculation results support the hypothesis and ultimately align with the objective of this paper to prove that improvement of Stand Jig Sealer and its relation toward the cycle time target. Precisely, the improvement of production capacity of PT. Astra Daihatsu Motor.

  5. Microbial engineering strategies to improve cell viability for biochemical production.

    Science.gov (United States)

    Lo, Tat-Ming; Teo, Wei Suong; Ling, Hua; Chen, Binbin; Kang, Aram; Chang, Matthew Wook

    2013-11-01

    Efficient production of biochemicals using engineered microbes as whole-cell biocatalysts requires robust cell viability. Robust viability leads to high productivity and improved bioprocesses by allowing repeated cell recycling. However, cell viability is negatively affected by a plethora of stresses, namely chemical toxicity and metabolic imbalances, primarily resulting from bio-synthesis pathways. Chemical toxicity is caused by substrates, intermediates, products, and/or by-products, and these compounds often interfere with important metabolic processes and damage cellular infrastructures such as cell membrane, leading to poor cell viability. Further, stresses on engineered cells are accentuated by metabolic imbalances, which are generated by heavy metabolic resource consumption due to enzyme overexpression, redistribution of metabolic fluxes, and impaired intracellular redox state by co-factor imbalance. To address these challenges, herein, we discuss a range of key microbial engineering strategies, substantiated by recent advances, to improve cell viability for commercially sustainable production of biochemicals from renewable resources. Copyright © 2013 Elsevier Inc. All rights reserved.

  6. Applied TRIZ in Improving Productivity in Textile Industry

    Directory of Open Access Journals (Sweden)

    Ahmad Aminah

    2017-01-01

    Full Text Available TRIZ is a methodology and a collection of problem solving tools and strategies that has been used in many other fields. Therefore, this paper proposes TRIZ method for improving the productivity in a textile industry. It focuses at the packing department in a textile company situated in Malaysia. The process was monitored and the problem was observed. TRIZ method is applied in this problem using Functional Analysis and trimming method. A comparison between before and after implementation is done in order to evaluate the productivity effectiveness.

  7. Multihop Wireless Networks Opportunistic Routing

    CERN Document Server

    Zeng, Kai; Li, Ming

    2011-01-01

    This book provides an introduction to opportunistic routing an emerging technology designed to improve the packet forwarding reliability, network capacity and energy efficiency of multihop wireless networks This book presents a comprehensive background to the technological challenges lying behind opportunistic routing. The authors cover many fundamental research issues for this new concept, including the basic principles, performance limit and performance improvement of opportunistic routing compared to traditional routing, energy efficiency and distributed opportunistic routing protocol desig

  8. Improving Quality of Seal Leak Test Product using Six Sigma

    Science.gov (United States)

    Luthfi Malik, Abdullah; Akbar, Muhammad; Irianto, Dradjad

    2016-02-01

    Seal leak test part is a polyurethane material-based product. Based on past data, defect level of this product was 8%, higher than the target of 5%. Quality improvement effort was done using six sigma method that included phases of define, measure, analyse, improve, and control. In the design phase, a Delphi method was used to identify factors that were critical to quality. In the measure phase, stability and process capability was measured. Fault tree analysis (FTA) and failure mode and effect analysis (FMEA) were used in the next phase to analize the root cause and to determine the priority issues. Improve phase was done by compiling, selecting, and designing alternative repair. Some improvement efforts were identified, i.e. (i) making a checklist for maintenance schedules, (ii) making written reminder form, (iii) modifying the SOP more detail, and (iv) performing a major service to the vacuum machine. To ensure the continuity of improvement efforts, some control activities were executed, i.e. (i) controlling, monitoring, documenting, and setting target frequently, (ii) implementing reward and punishment system, (iii) adding cleaning tool, and (iv) building six sigma organizational structure.

  9. Improving preanalytic processes using the principles of lean production (Toyota Production System).

    Science.gov (United States)

    Persoon, Thomas J; Zaleski, Sue; Frerichs, Janice

    2006-01-01

    The basic technologies used in preanalytic processes for chemistry tests have been mature for a long time, and improvements in preanalytic processes have lagged behind improvements in analytic and postanalytic processes. We describe our successful efforts to improve chemistry test turnaround time from a central laboratory by improving preanalytic processes, using existing resources and the principles of lean production. Our goal is to report 80% of chemistry tests in less than 1 hour and to no longer recognize a distinction between expedited and routine testing. We used principles of lean production (the Toyota Production System) to redesign preanalytic processes. The redesigned preanalytic process has fewer steps and uses 1-piece flow to move blood samples through the accessioning, centrifugation, and aliquoting processes. Median preanalytic processing time was reduced from 29 to 19 minutes, and the laboratory met the goal of reporting 80% of chemistry results in less than 1 hour for 11 consecutive months.

  10. Continued SOFC cell and stack technology and improved production methods

    Energy Technology Data Exchange (ETDEWEB)

    Wandel, M.; Brodersen, K.; Phair, J. (and others)

    2009-05-15

    Within this project significant results are obtained on a number of very diverse areas ranging from development of cell production, metallic creep in interconnect to assembling and test of stacks with foot print larger than 500 cm2. Out of 38 milestones 28 have been fulfilled and 10 have been partly fulfilled. This project has focused on three main areas: 1) The continued cell development and optimization of manufacturing processes aiming at production of large foot-print cells, improving cell performance and development environmentally more benign production methods. 2) Stack technology - especially stacks with large foot print and improving the stack design with respect to flow geometry and gas leakages. 3) Development of stack components with emphasis on sealing (for 2G as well as 3G), interconnect (coat, architecture and creep) and test development. Production of cells with a foot print larger than 500 cm2 is very difficult due to the brittleness of the cells and great effort has been put into this topic. Eight cells were successfully produced making it possible to assemble and test a real stack thereby giving valuable results on the prospects of stacks with large foot print. However, the yield rate is very low and a significant development to increase this yield lies ahead. Several lessons were learned on the stack level regarding 'large foot print' stacks. Modelling studies showed that the width of the cell primarily is limited by production and handling of the cell whereas the length (in the flow direction) is limited by e.g. pressure drop and necessary manifolding. The optimal cell size in the flow direction was calculated to be between approx20 cm and < 30 cm. From an economical point of view the production yield is crucial and stacks with large foot print cell area are only feasible if the cell production yield is significantly enhanced. Co-casting has been pursued as a production technique due to the possibilities in large scale production

  11. Effective Conveyor Belt Inspection for Improved Mining Productivity

    Energy Technology Data Exchange (ETDEWEB)

    David LaRose

    2006-07-01

    This document details progress on the project ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2005 to May 14, 2006. Highlights include significant improvements in the accuracy and reliability of computer-vision based vulcanized splice detection, deployment of the vulcanized splice detection algorithms for daily use in two working mines, and successful demonstration of an early prototype of a Smart-Camera based system for on-site mechanical splice detection in coal mine installations.

  12. The role of productivity in improving the environmental sustainability of ruminant production systems.

    Science.gov (United States)

    Capper, Judith L; Bauman, Dale E

    2013-01-01

    The global livestock industry is charged with providing sufficient animal source foods to supply the global population while improving the environmental sustainability of animal production. Improved productivity within dairy and beef systems has demonstrably reduced resource use and greenhouse gas emissions per unit of food over the past century through the dilution of maintenance effect. Further environmental mitigation effects have been gained through the current use of technologies and practices that enhance milk yield or growth in ruminants; however, the social acceptability of continued intensification and use of productivity-enhancing technologies is subject to debate. As the environmental impact of food production continues to be a significant issue for all stakeholders within the field, further research is needed to ensure that comparisons among foods are made based on both environmental impact and nutritive value to truly assess the sustainability of ruminant products.

  13. CCNA Wireless Study Guide

    CERN Document Server

    Lammle, Todd

    2010-01-01

    A complete guide to the CCNA Wireless exam by leading networking authority Todd Lammle. The CCNA Wireless certification is the most respected entry-level certification in this rapidly growing field. Todd Lammle is the undisputed authority on networking, and this book focuses exclusively on the skills covered in this Cisco certification exam. The CCNA Wireless Study Guide joins the popular Sybex study guide family and helps network administrators advance their careers with a highly desirable certification.: The CCNA Wireless certification is the most respected entry-level wireless certification

  14. Improving market oriented product development in Danish food companies

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    1994-01-01

    One of the factors that has been strongly associated with successful new product development is a profound knwledge of customers' needs and wants as well as the ability to transform this knowledge into specific product characteristics and benefits there is a general agreement on the importance...... of this factor, it is a fact that the average company does not undertake marketing related activities in a way even close to that prescribed. This paper describes a research project undertaken with th of describing and later increasing the market orientation of the development fucntion in a number of Danish food......-processing companies. Preliminary results show that the companies have improved their market orientation, but also that the change pro has been difficult and time-consuming and improvements rather incremental....

  15. Improvement of biohydrogen production using a reduced pressure fermentation.

    Science.gov (United States)

    Kisielewska, M; Dębowski, M; Zieliński, M

    2015-10-01

    This study investigated the effect of reduced pressure on biohydrogen production in an upflow anaerobic sludge blanket (UASB) reactor from whey permeate. The results showed that the reduced pressure fermentation was more effective in enhancing biohydrogen production than dark fermentative hydrogen production at atmospheric pressure. Mesophilic fermentative biohydrogen production was investigated at a constant hydraulic retention time (HRT) of 24 h and increasing organic loading rates (OLRs) of 20, 25, 30, 35 kg COD/m(3) day. The reduced pressure fermentation was successfully operated at all OLRs tested. The maximum proportion of hydrogen in biogas of 47.7 %, volumetric hydrogen production rate (VHPR) of 7.10 L H2/day and hydrogen yield of 4.55 mol H2/kg COD removed occurred at the highest OLR. Increase in OLR affected the hydrogen production in UASB reactor exploited at atmospheric pressure. The reduced pressure process was able to remarkably improve the biohydrogen performance at high OLRs.

  16. Lean Manufacturing And Productivity Improvement In Coal Mining

    OpenAIRE

    Manoj Ade; Dr. V.S.Deshpande

    2012-01-01

    The economic reforms- Liberalization, Privatization, Globalization, (LPG) started in 1991 in India. The main objective of the government was to achieve high economic growth and industrialize the nation for the well-being of Indian citizens. Thus Indian market became Global and open market. Coal industry was not an exception to this phenomena of globalization. The improvement in productivity has become need of coal industry to take the competitive advantage of global market.The challenge to th...

  17. Design and Production of Wireless Phone Universal Charge%无线手机万能充电器的设计和制作

    Institute of Scientific and Technical Information of China (English)

    董秀英; 瞿绪龙

    2014-01-01

    采用线圈耦合进行能量交换设计无线手机万能充电器,通过振荡器、功率放大和初级线圈将交流电能发送出去,接收端通过次级线圈接收交流能量后,整流变为直流电能给智能充电管理芯片CT3582供电,该管理芯片具有充电指示、检测电池好坏、自动识别电池极性和充满指示的功能,经过硬件制作和调试,满足设计的要求。%The wireless phone universal charger was designed by using the coupling coil to exchange energy. The AC pow⁃er is sent by the primary coil through the oscillator and power amplifier. The passage of the secondary coil receives the AC energy that changes the direct current by the rectification. It gives the power to the intelligent management chip CT3582. The management chip has the functions of charging indicator, bad battery detection, automatic identification of cell polarity and full instructions. It meets the design requirements after the hardware production and debugging.

  18. The Wireless ATM Architecture

    Directory of Open Access Journals (Sweden)

    R. Palitefka

    1998-06-01

    Full Text Available An overview of the proposed wireless ATM structure is provided. Wireless communication have been developed to a level where offered services can now be extended beyond voice and data. There are already wireless LANs, cordless systems offering data services and mobile data. Wireless LAN systems are basically planned for local, on-promises and in-house networking providing short distance radio or infrared links between computer system. The main challenge of wireless ATM is to harmonise the development of broadband wireless system with service B -ISDN/ATM and ATM LANs, and offer multimedia multiservice features for the support of time-sensitive voice communication, video, desktop multimedia applications, and LAN data traffic for the wireless user.

  19. Metabolic engineering strategies for improving xylitol production from hemicellulosic sugars.

    Science.gov (United States)

    Su, Buli; Wu, Mianbin; Lin, Jianping; Yang, Lirong

    2013-11-01

    Xylitol is a five-carbon sugar alcohol with potential for use as a sweetener. Industrially, xylitol is currently produced by chemical hydrogenation of D-xylose using Raney nickel catalysts and this requires expensive separation and purification steps as well as high pressure and temperature that lead to environmental pollution. Highly efficient biotechnological production of xylitol using microorganisms is gaining more attention and has been proposed as an alternative process. Although the biotechnological method has not yet surpassed the advantages of chemical reduction in terms of yield and cost, various strategies offer promise for the biotechnological production of xylitol. In this review, the focus is on the most recent developments of the main metabolic engineering strategies for improving the production of xylitol.

  20. USE OF IONIC LIQUIDS FOR IMPROVEMENT OF CELLULOSIC ETHANOL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Qijun Wang

    2011-02-01

    Full Text Available Cellulosic ethanol production has drawn much attention in recent years. However, there remain significant technical challenges before such production can be considered as economically feasible at an industrial scale. Among them, the efficient conversion of carbohydrates in lignocellulosic biomass into fermentable sugars is one of the most challenging technical difficulties in cellulosic ethanol production. Use of ionic liquids has opened new avenues to solve this problem by two different pathways. One is pretreatment of lignocellulosic biomass using ionic liquids to increase its enzymatic hydrolysis efficiency. The other is to transform the hydrolysis process of lignocellulosic biomass from a heterogeneous reaction system to a homogeneous one by dissolving it into ionic liquids, thus improving its hydrolysis efficiency.

  1. Fertility management of bulls to improve beef cattle productivity.

    Science.gov (United States)

    Thundathil, Jacob C; Dance, Alysha L; Kastelic, John P

    2016-07-01

    Global demand for animal proteins is increasing, necessitating increased efficiency of global food production. Improving reproductive efficiency of beef cattle, especially bull fertility, is particularly critical, as one bull can breed thousands of females (by artificial insemination). Identifying the genetic basis of male reproductive traits that influence male and female fertility, and using this information for selection, would improve herd fertility. Early-life selection of elite bulls by genomic approaches and feeding them to optimize postpubertal reproductive potential are essential for maximizing profitability. Traditional bull breeding soundness evaluation, or systematic analysis of frozen semen, eliminates bulls or semen samples that are grossly abnormal. However, semen samples classified as satisfactory on the basis of traditional approaches differ in fertility. Advanced sperm function assays developed for assessing compensatory and noncompensatory (submicroscopic) sperm traits can predict such variations in bull fertility. New knowledge on epigenetic modulations of sperm DNA, messenger RNA, and proteins is fundamental to refine and expand sperm function assays. Sexed semen, plus advanced reproductive technologies (e.g., ovum pickup and in vitro production of embryos) can maximize the efficiency of beef cattle production. This review is focused on genetic considerations for bull selection, physiology of reproductive development, breeding soundness evaluation, recent advances in assessing frozen semen, and existing and emerging uses of sexed semen in beef cattle production.

  2. Membrane engineering via trans unsaturated fatty acids production improves Escherichia coli robustness and production of biorenewables.

    Science.gov (United States)

    Tan, Zaigao; Yoon, Jong Moon; Nielsen, David R; Shanks, Jacqueline V; Jarboe, Laura R

    2016-05-01

    Constructing microbial biocatalysts that produce biorenewables at economically viable yields and titers is often hampered by product toxicity. For production of short chain fatty acids, membrane damage is considered the primary mechanism of toxicity, particularly in regards to membrane integrity. Previous engineering efforts in Escherichia coli to increase membrane integrity, with the goal of increasing fatty acid tolerance and production, have had mixed results. Herein, a novel approach was used to reconstruct the E. coli membrane by enabling production of a novel membrane component. Specifically, trans unsaturated fatty acids (TUFA) were produced and incorporated into the membrane of E. coli MG1655 by expression of cis-trans isomerase (Cti) from Pseudomonas aeruginosa. While the engineered strain was found to have no increase in membrane integrity, a significant decrease in membrane fluidity was observed, meaning that membrane polarization and rigidity were increased by TUFA incorporation. As a result, tolerance to exogenously added octanoic acid and production of octanoic acid were both increased relative to the wild-type strain. This membrane engineering strategy to improve octanoic acid tolerance was found to require fine-tuning of TUFA abundance. Besides improving tolerance and production of carboxylic acids, TUFA production also enabled increased tolerance in E. coli to other bio-products, e.g. alcohols, organic acids, aromatic compounds, a variety of adverse industrial conditions, e.g. low pH, high temperature, and also elevated styrene production, another versatile bio-chemical product. TUFA permitted enhanced growth due to alleviation of bio-product toxicity, demonstrating the general effectiveness of this membrane engineering strategy towards improving strain robustness.

  3. Perfusion seed cultures improve biopharmaceutical fed-batch production capacity and product quality.

    Science.gov (United States)

    Yang, William C; Lu, Jiuyi; Kwiatkowski, Chris; Yuan, Hang; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

    2014-01-01

    Volumetric productivity and product quality are two key performance indicators for any biopharmaceutical cell culture process. In this work, we showed proof-of-concept for improving both through the use of alternating tangential flow perfusion seed cultures coupled with high-seed fed-batch production cultures. First, we optimized the perfusion N-1 stage, the seed train bioreactor stage immediately prior to the production bioreactor stage, to minimize the consumption of perfusion media for one CHO cell line and then successfully applied the optimized perfusion process to a different CHO cell line. Exponential growth was observed throughout the N-1 duration, reaching >40 × 10(6) vc/mL at the end of the perfusion N-1 stage. The cultures were subsequently split into high-seed (10 × 10(6) vc/mL) fed-batch production cultures. This strategy significantly shortened the culture duration. The high-seed fed-batch production processes for cell lines A and B reached 5 g/L titer in 12 days, while their respective low-seed processes reached the same titer in 17 days. The shortened production culture duration potentially generates a 30% increase in manufacturing capacity while yielding comparable product quality. When perfusion N-1 and high-seed fed-batch production were applied to cell line C, higher levels of the active protein were obtained, compared to the low-seed process. This, combined with correspondingly lower levels of the inactive species, can enhance the overall process yield for the active species. Using three different CHO cell lines, we showed that perfusion seed cultures can optimize capacity utilization and improve process efficiency by increasing volumetric productivity while maintaining or improving product quality. © 2014 American Institute of Chemical Engineers.

  4. Product Quality Improvement Using FMEA for Electric Parking Brake (EPB)

    Science.gov (United States)

    Dumitrescu, C. D.; Gruber, G. C.; Tişcă, I. A.

    2016-08-01

    One of the most frequently used methods to improve product quality is complex FMEA. (Failure Modes and Effects Analyses). In the literature various FMEA is known, depending on the mode and depending on the targets; we mention here some of these names: Failure Modes and Effects Analysis Process, or analysis Failure Mode and Effects Reported (FMECA). Whatever option is supported by the work team, the goal of the method is the same: optimize product design activities in research, design processes, implementation of manufacturing processes, optimization of mining product to beneficiaries. According to a market survey conducted on parts suppliers to vehicle manufacturers FMEA method is used in 75%. One purpose of the application is that after the research and product development is considered resolved, any errors which may be detected; another purpose of applying the method is initiating appropriate measures to avoid mistakes. Achieving these two goals leads to a high level distribution in applying, to avoid errors already in the design phase of the product, thereby avoiding the emergence and development of additional costs in later stages of product manufacturing. During application of FMEA method using standardized forms; with their help will establish the initial assemblies of product structure, in which all components will be viewed without error. The work is an application of the method FMEA quality components to optimize the structure of the electrical parking brake (Electric Parching Brake - E.P.B). This is a component attached to the roller system which ensures automotive replacement of conventional mechanical parking brake while ensuring its comfort, functionality, durability and saves space in the passenger compartment. The paper describes the levels at which they appealed in applying FMEA, working arrangements in the 4 distinct levels of analysis, and how to determine the number of risk (Risk Priority Number); the analysis of risk factors and established

  5. Improvement of Production Quality by using Six Sigma Technique:

    Directory of Open Access Journals (Sweden)

    Sawsan Ali

    2013-04-01

    Full Text Available As a result of lack of conformity of the outer diameter of the filling piston of plastic syringe to the specifications set out in the design map and the increased demand for its  products from the Medical syringes factory – Babylon. The research conducts the necessary investigations and  analysis of the production process as most of the units rejected by fact that the outer diameter of the filling piston is smaller than the minimum specification and units returned to work  due to the fact that  the outer diameter larger than the upper limit of the specification.13The research aims firstly to examine the outer diameter of the filling piston through the use of the control chart of the variables represented by the average , and its impact on the production process capability because the increase in diameter specification leads to an increase in the pressure imposed on the lining of the cylinder, causing difficulty in piston movement and a decrease in diameter specification which leads to loose the process capability to prevent leakage of fluid, causing air to enter as well as to speed the movement of the piston, which negatively affects human life in both cases. Secondly, study the possibility of improving the production process capability by using advanced levels of the sigma.The results showed that the production process in the case of a disciplined and follows a normal distribution, the pointer of  the production process capability is equal to (0.55 and the factory works within the level of Sigma equal to (1.65. The proportion of a damaged product is (15.8 % and rework (0.99 %.In order to  reduce the proportion of damaged product, this paper introduces a quality plan depending on ( ±0.025 as tolerance limits instead of ( ±0.05 to increase sigma level by 202%.

  6. Household wireless electroencephalogram hat

    Science.gov (United States)

    Szu, Harold; Hsu, Charles; Moon, Gyu; Yamakawa, Takeshi; Tran, Binh

    2012-06-01

    We applied Compressive Sensing to design an affordable, convenient Brain Machine Interface (BMI) measuring the high spatial density, and real-time process of Electroencephalogram (EEG) brainwaves by a Smartphone. It is useful for therapeutic and mental health monitoring, learning disability biofeedback, handicap interfaces, and war gaming. Its spec is adequate for a biomedical laboratory, without the cables hanging over the head and tethered to a fixed computer terminal. Our improved the intrinsic signal to noise ratio (SNR) by using the non-uniform placement of the measuring electrodes to create the proximity of measurement to the source effect. We computing a spatiotemporal average the larger magnitude of EEG data centers in 0.3 second taking on tethered laboratory data, using fuzzy logic, and computing the inside brainwave sources, by Independent Component Analysis (ICA). Consequently, we can overlay them together by non-uniform electrode distribution enhancing the signal noise ratio and therefore the degree of sparseness by threshold. We overcame the conflicting requirements between a high spatial electrode density and precise temporal resolution (beyond Event Related Potential (ERP) P300 brainwave at 0.3 sec), and Smartphone wireless bottleneck of spatiotemporal throughput rate. Our main contribution in this paper is the quality and the speed of iterative compressed image recovery algorithm based on a Block Sparse Code (Baranuick et al, IEEE/IT 2008). As a result, we achieved real-time wireless dynamic measurement of EEG brainwaves, matching well with traditionally tethered high density EEG.

  7. Fading and interference mitigation in wireless communications

    CERN Document Server

    Panic, Stefan; Anastasov, Jelena; Spalevic, Petar

    2013-01-01

    The rapid advancement of various wireless communication system services has created the need to analyze the possibility of their performance improvement. Introducing the basic principles of digital communications performance analysis and its mathematical formalization, Fading and Interference Mitigation in Wireless Communications will help you stay up to date with recent developments in the performance analysis of space diversity reception over fading channels in the presence of cochannel interference.The book presents a unified method for computing the performance of digital communication sys

  8. INTEGRATED COST MODEL FOR IMPROVING THE PRODUCTION IN COMPANIES

    Directory of Open Access Journals (Sweden)

    Zuzana Hajduova

    2014-12-01

    Full Text Available Purpose: All processes in the company play important role in ensuring functional integrated management system. We point out the importance of need for a systematic approach to the use of quantitative, but especially statistical methods for modelling the cost of the improvement activities that are part of an integrated management system. Development of integrated management systems worldwide leads towards building of systematic procedures of implementation maintenance and improvement of all systems according to the requirements of all the sides involved.Methodology: Statistical evaluation of the economic indicators of improvement costs and the need for a systematic approach to their management in terms of integrated management systems have become a key role also in the management of processes in the company Cu Drôt, a.s. The aim of this publication is to highlight the importance of proper implementation of statistical methods in the process of improvement costs management in the integrated management system of current market conditions and document the legitimacy of a systematic approach in the area of monitoring and analysing indicators of improvement with the aim of the efficient process management of company. We provide specific example of the implementation of appropriate statistical methods in the production of copper wire in a company Cu Drôt, a.s. This publication also aims to create a model for the estimation of integrated improvement costs, which through the use of statistical methods in the company Cu Drôt, a.s. is used to support decision-making on improving efficiency.Findings: In the present publication, a method for modelling the improvement process, by an integrated manner, is proposed. It is a method in which the basic attributes of the improvement in quality, safety and environment are considered and synergistically combined in the same improvement project. The work examines the use of sophisticated quantitative, especially

  9. An Efficient ECDSA-Based Signature Scheme for Wireless Networks

    Institute of Scientific and Technical Information of China (English)

    XU Zhong; DAI Guanzhong; YANG Deming

    2006-01-01

    Wired equivalent security is difficult to provide in wireless networks due to high dynamics, wireless link vulnerability, and decentralization. The Elliptic Curve Digital Signature Algorithm(ECDSA) has been applied to wireless networks because of its low computational cost and short key size, which reduces the overheads in a wireless environment. This study improves the ECDSA scheme by reducing its time complexity. The significant advantage of the algorithm is that our new scheme needs not to calculate modular inverse operation in the phases of signature generation and signature verification. Such an improvement makes the proposed scheme more efficient and secure.

  10. Underwater optical wireless communication network

    Science.gov (United States)

    Arnon, Shlomi

    2010-01-01

    The growing need for underwater observation and subsea monitoring systems has stimulated considerable interest in advancing the enabling technologies of underwater wireless communication and underwater sensor networks. This communication technology is expected to play an important role in investigating climate change, in monitoring biological, biogeochemical, evolutionary, and ecological changes in the sea, ocean, and lake environments, and in helping to control and maintain oil production facilities and harbors using unmanned underwater vehicles (UUVs), submarines, ships, buoys, and divers. However, the present technology of underwater acoustic communication cannot provide the high data rate required to investigate and monitor these environments and facilities. Optical wireless communication has been proposed as the best alternative to meet this challenge. Models are presented for three kinds of optical wireless communication links: (a) a line-of-sight link, (b) a modulating retroreflector link, and (c) a reflective link, all of which can provide the required data rate. We analyze the link performance based on these models. From the analysis, it is clear that as the water absorption increases, the communication performance decreases dramatically for the three link types. However, by using the scattered light it was possible to mitigate this decrease in some cases. It is concluded from the analysis that a high-data-rate underwater optical wireless network is a feasible solution for emerging applications such as UUV-to-UUV links and networks of sensors, and extended ranges in these applications could be achieved by applying a multi-hop concept.

  11. Improved algorithm based on hybrid wireless mesh protocol%基于混合无线网状网协议的改进算法研究

    Institute of Scientific and Technical Information of China (English)

    何凌; 黄俊

    2011-01-01

    HWMP provides two routing modes, proactive mode of tree-based routing protocol and on-demand mode of AODV routing protocol. There are a lot of problems in this protocol, such as low expansibility, efficiency and the root is the weak point.When the traffic is heavy, the collision and loss of data packets will increase. This paper proposed an improved algorithm based on hybrid wireless Mesh protocol to solve above problems. In the Mesh network, the source mode could calculate the bestmetric mute to any destination quickly when used the proposed algorithm. The improved protocol combined proactive mode with on-demand mode to apply to all transmission environment. The simulation results reveal that the improved protocol gets better performance on packet delivery rate, average end-to-end delay and throughput.%HWMP提供了两种路由模式,分别是以树状路由(TBR)为基础的先应路由模式和以AODV为基础的按需路由模式.然而这个协议存在着许多问题,如可扩展性较差、效率较低、根是网络故障点,当网络业务繁重时,数据包的碰撞和丢失增加.提出一种混合无线网状网协议的改进算法来解决以上问题.在Mesh网络内部.改进后的协议能够使源节点快速地计算出到任意目的节点的最优路径,同时也将先应路由模式和按需路由模式相结合以适用于所有传输环境.从仿真结果可看出,改进后的协议能在数据包到达率、平均端到端时延和吞吐量指标达到更好的性能.

  12. Metabolic engineering of Escherichia coli to improve recombinant protein production.

    Science.gov (United States)

    Liu, Min; Feng, Xinjun; Ding, Yamei; Zhao, Guang; Liu, Huizhou; Xian, Mo

    2015-12-01

    Escherichia coli is one of the most widely used strains for recombinant protein production. However, obstacles also exist in both academic researches and industrial applications, such as the metabolic burden, the carbon source waste, and the cells' physiological deterioration. This article reviews recent approaches for improving recombinant protein production in metabolic engineering, including workhorse selection, stress factor application, and carbon flux regulation. Selecting a suitable host is the first key point for recombinant protein production. In general, it all depends on characteristics of the strains and the target proteins. It will be triggered cells physiological deterioration when the medium is significantly different from the cell's natural environment. Coexpression of stress factors can help proteins to fold into their native conformation. Carbon flux regulation is a direct approach for redirecting more carbon flux toward the desirable pathways and products. However, some undesirable consequences are usually found in metabolic engineering, such as glucose transport inhibition, cell growth retardation, and useless metabolite accumulation. More efficient regulators and platform cell factories should be explored to meet a variety of production demands.

  13. Improving the process of I carbonation in sugar production

    Directory of Open Access Journals (Sweden)

    V. A. Golybin

    2016-01-01

    Full Text Available Of the total effect of the removal of non-sugars 30–36 % achieved in modern schemes extract purification, a large proportion removed by adsorption of calcium carbonate particles formed in the process of carbonation. To improve the efficiency of the purification steps juice we have proposed a two-stage carbonation I cleaned juice. Holding two stages I saturation at high pH juice is justified in view of the efficiency of adsorption treatment with calcium carbonate. To quantify the proposed option saturation performed laboratory research on plant juices derived from beet varying quality, with the definition of quality indicators to be cleansed juice at all stages of processing the raw juice in warm preliming, the combined main liming, I and II carbonation. Indicators were evaluated for juice in the sugar industry accepted methods. In comparison with the standard version of the proposed two-stage version of I carbonation with intermediate filtration improves filtration performance carbonated juice on 24–26 %, reduce the color of the purified juice to 17–23 %, the content of calcium in the 22–24 %, improve the overall treatment effect 16–19 % (relative. Improving the quality of the purified juice ensures the production of white sugar of standard quality, an increase in the cleaning effect of diffusion juice reduces the loss of sucrose in the molasses and increases the yield of the final commercial product. The proposed version of the separation processes of thermochemical conversion of non-sugars will create conditions for maximum removal by adsorption of their decay products, particularly dyes.

  14. Improved curdlan production with discarded bottom parts of Asparagus spear.

    Science.gov (United States)

    Anane, Rex Frimpong; Sun, Huifang; Zhao, Lamei; Wang, Le; Lin, Chun; Mao, Zichao

    2017-04-07

    This work evaluated the improvement of curdlan production of Agrobacterium sp. ATCC 31749 by using culture medium containing juice of discarded bottom part of green Asparagus spear (MJDA). Curdlan production was carried out using Agrobacterium sp. ATCC 31749 in flasks with different volumes of MJDA and its non-juice-adding control (CK) incubated in shaker at 30 °C, 200 rpm rotation for 168 h. All MJDA media increased Agrobacterium sp. ATCC 31749 cell mass and enhanced the cells' ability to utilise sucrose, the carbon source for curdlan biosynthesis, and thereby produced higher concentration of curdlan than CK which is used for commercial production of curdlan. After 168 h of fermentation, 10% MJDA produced 40.2 g/l of curdlan whiles CK produced 21.1 g/l. Curdlan production was increased by 90.4% higher in 10% MJDA than CK. Curdlan produced by 10% MJDA contains 1.2 and 1.5 µg/ml of Asparagus flavonoids and saponins respectively as additives which have wide range of health benefits. The mass of sucrose needed to produce 1.0 g curdlan by Agrobacterium sp. ATCC 31749 in CK is 1.7-fold more than in 10% MJDA. The results strongly revealed that 5-10% MJDA is a good curdlan fermentation media which increase curdlan production yield with cheaper cost of production and simultaneously reduce environmental waste resulting from the large scaled discarded bottom parts of green Asparagus spear during Asparagus production.

  15. Improving lactate metabolism in an intensified CHO culture process: productivity and product quality considerations.

    Science.gov (United States)

    Xu, Sen; Hoshan, Linda; Chen, Hao

    2016-11-01

    In this study, we discussed the development and optimization of an intensified CHO culture process, highlighting medium and control strategies to improve lactate metabolism. A few strategies, including supplementing glucose with other sugars (fructose, maltose, and galactose), controlling glucose level at Productivity and product quality attributes differences between batch, fed-batch, and concentrated fed-batch cultures were discussed. The importance of process and cell metabolism understanding when adapting the existing process to a new operational mode was demonstrated in the study.

  16. Improving product cost and schedule management in a garment product development process

    OpenAIRE

    Becker, Lotta

    2016-01-01

    The purpose of this research is to improve the beginning stages of a garment product development process at Marimekko Oyj, a Finnish design company, by finding better ways to manage the product cost and schedule. The main objective is to bring the final cost of garments closer to the original target cost in order to keep margins at required levels. Action research and case study were used as research methods. During the action research cycles, two collections were started and observed. Th...

  17. Application of the suggestion system in the improvement of the production process and product quality control

    Science.gov (United States)

    Gołaś, H.; Mazur, A.; Gruszka, J.; Szafer, P.

    2016-08-01

    The elaboration is a case study and the research was carried out in the company Alco-Mot Ltd., which employs 120 people. The company specializes in the production of lead poles for industrial and traction batteries using gravity casting. The elements embedded in the cast are manufactured on a machining centre, which provides the stability of the process and of the dimensions of the product as well as a very short production time. As a result of observation and analysis the authors have developed a concept for the implementation of a dynamic suggestion system in ALCO-MOT, including, among others, a standard for actions in the implementation of the suggestion system, as well as clear guidelines for the processing and presentation of the activities undertaken in the time between the establishment of the concept (suggestions) and the benefits analysis after the proposed solutions have been implemented. The authors also present how suggestions proposed by ALCO-MOT staff contributed to the improvement of the processes of production and quality control. Employees offered more than 30 suggestions, of which more than a half are being implemented now and further actions are being prepared for implementation. The authors will present the results of improvements in, for example, tool replacement time, scrap reduction. The authors will present how kaizen can improve the production and quality control processes. They will present how the production and quality control processes looked before and after the implementation of employee suggestions.

  18. INNOVATIVE USE OF QUALITY MANAGEMENT METHODS FOR PRODUCT IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    Katarzyna MIDOR

    2016-10-01

    Full Text Available Organisations constantly look for new, innovative solutions and methods which could be used to improve their efficiency and increase the quality of their products. Identifying the causes for returns is an important issue for modern compa-nies, as returns are the cause for the increase in production costs and, most importantly, the loss of credibility in the eyes of the client. Therefore, for the company to be able to sustain or strengthen its position on the market, it has to follow the rules of quality management. Especially important is the rule of constant improvement. This rule is primarily connected with preventing errors and defects from occurring at all the stages of the production process. To achieve that, one must, among other things, use quality management tools. The article presents an analysis of causes for returns of a vibrating screen produced by a company which manufactures machinery and equipment for the extractive industry, using quality management tools such as the Ishikawa diagram and Pareto analysis. The analysis allowed for the identifi-cation of the causes of client returns which could not be previously identified, and proposing solutions for them.

  19. Wireless Josephson amplifier

    Energy Technology Data Exchange (ETDEWEB)

    Narla, A.; Sliwa, K. M.; Hatridge, M.; Shankar, S.; Frunzio, L.; Schoelkopf, R. J.; Devoret, M. H. [Department of Applied Physics, Yale University, New Haven, Connecticut 06511 (United States)

    2014-06-09

    Josephson junction parametric amplifiers are playing a crucial role in the readout chain in superconducting quantum information experiments. However, their integration with current 3D cavity implementations poses the problem of transitioning between waveguide, coax cables, and planar circuits. Moreover, Josephson amplifiers require auxiliary microwave components, like directional couplers and/or hybrids, that are sources of spurious losses and impedance mismatches that limit measurement efficiency and amplifier tunability. We have developed a wireless architecture for these parametric amplifiers that eliminates superfluous microwave components and interconnects. This greatly simplifies their assembly and integration into experiments. We present an experimental realization of such a device operating in the 9–11 GHz band with about 100 MHz of amplitude gain-bandwidth product, on par with devices mounted in conventional sample holders. The simpler impedance environment presented to the amplifier also results in increased amplifier tunability.

  20. Improved Ant Colony Optimization for Seafood Product Delivery Routing Problem

    Directory of Open Access Journals (Sweden)

    Baozhen Yao

    2014-02-01

    Full Text Available This paper deals with a real-life vehicle delivery routing problem, which is a seafood product delivery routing problem. Considering the features of the seafood product delivery routing problem, this paper formulated this problem as a multi-depot open vehicle routing problem. Since the multi-depot open vehicle routing problem is a very complex problem, a method is used to reduce the complexity of the problem by changing the multi-depot open vehicle routing problem into an open vehicle routing problem with a dummy central depot in this paper. Then, ant colony optimization is used to solve the problem. To improve the performance of the algorithm, crossover operation and some adaptive strategies are used. Finally, the computational results for the benchmark problems of the multi-depot vehicle routing problem indicate that the proposed ant colony optimization is an effective method to solve the multi-depot vehicle routing problem. Furthermore, the computation results of the seafood product delivery problem from Dalian, China also suggest that the proposed ant colony optimization is feasible to solve the seafood product delivery routing problem.

  1. Glycosylation: impact, control and improvement during therapeutic protein production.

    Science.gov (United States)

    Costa, Ana Rita; Rodrigues, Maria Elisa; Henriques, Mariana; Oliveira, Rosário; Azeredo, Joana

    2014-12-01

    The emergence of the biopharmaceutical industry represented a major revolution for modern medicine, through the development of recombinant therapeutic proteins that brought new hope for many patients with previously untreatable diseases. There is a ever-growing demand for these therapeutics that forces a constant technological evolution to increase product yields while simultaneously reducing costs. However, the process changes made for this purpose may also affect the quality of the product, a factor that was initially overlooked but which is now a major focus of concern. Of the many properties determining product quality, glycosylation is regarded as one of the most important, influencing, for example, the biological activity, serum half-life and immunogenicity of the protein. Consequently, monitoring and control of glycosylation is now critical in biopharmaceutical manufacturing and a requirement of regulatory agencies. A rapid evolution is being observed in this context, concerning the influence of glycosylation in the efficacy of different therapeutic proteins, the impact on glycosylation of a diversity of parameters/processes involved in therapeutic protein production, the analytical methodologies employed for glycosylation monitoring and control, as well as strategies that are being explored to use this property to improve therapeutic protein efficacy (glycoengineering). This work reviews the main findings on these subjects, providing an up-to-date source of information to support further studies.

  2. Biohydrogen production: strategies to improve process efficiency through microbial routes.

    Science.gov (United States)

    Chandrasekhar, Kuppam; Lee, Yong-Jik; Lee, Dong-Woo

    2015-04-14

    The current fossil fuel-based generation of energy has led to large-scale industrial development. However, the reliance on fossil fuels leads to the significant depletion of natural resources of buried combustible geologic deposits and to negative effects on the global climate with emissions of greenhouse gases. Accordingly, enormous efforts are directed to transition from fossil fuels to nonpolluting and renewable energy sources. One potential alternative is biohydrogen (H2), a clean energy carrier with high-energy yields; upon the combustion of H2, H2O is the only major by-product. In recent decades, the attractive and renewable characteristics of H2 led us to develop a variety of biological routes for the production of H2. Based on the mode of H2 generation, the biological routes for H2 production are categorized into four groups: photobiological fermentation, anaerobic fermentation, enzymatic and microbial electrolysis, and a combination of these processes. Thus, this review primarily focuses on the evaluation of the biological routes for the production of H2. In particular, we assess the efficiency and feasibility of these bioprocesses with respect to the factors that affect operations, and we delineate the limitations. Additionally, alternative options such as bioaugmentation, multiple process integration, and microbial electrolysis to improve process efficiency are discussed to address industrial-level applications.

  3. Biohydrogen Production: Strategies to Improve Process Efficiency through Microbial Routes

    Directory of Open Access Journals (Sweden)

    Kuppam Chandrasekhar

    2015-04-01

    Full Text Available The current fossil fuel-based generation of energy has led to large-scale industrial development. However, the reliance on fossil fuels leads to the significant depletion of natural resources of buried combustible geologic deposits and to negative effects on the global climate with emissions of greenhouse gases. Accordingly, enormous efforts are directed to transition from fossil fuels to nonpolluting and renewable energy sources. One potential alternative is biohydrogen (H2, a clean energy carrier with high-energy yields; upon the combustion of H2, H2O is the only major by-product. In recent decades, the attractive and renewable characteristics of H2 led us to develop a variety of biological routes for the production of H2. Based on the mode of H2 generation, the biological routes for H2 production are categorized into four groups: photobiological fermentation, anaerobic fermentation, enzymatic and microbial electrolysis, and a combination of these processes. Thus, this review primarily focuses on the evaluation of the biological routes for the production of H2. In particular, we assess the efficiency and feasibility of these bioprocesses with respect to the factors that affect operations, and we delineate the limitations. Additionally, alternative options such as bioaugmentation, multiple process integration, and microbial electrolysis to improve process efficiency are discussed to address industrial-level applications.

  4. Pretreatment of microalgae to improve biogas production: a review.

    Science.gov (United States)

    Passos, Fabiana; Uggetti, Enrica; Carrère, Hélène; Ferrer, Ivet

    2014-11-01

    Microalgae have been intensively studied as a source of biomass for replacing conventional fossil fuels in the last decade. The optimization of biomass production, harvesting and downstream processing is necessary for enabling its full-scale application. Regarding biofuels, biogas production is limited by the characteristics of microalgae, in particular the complex cell wall structure of most algae species. Therefore, pretreatment methods have been investigated for microalgae cell wall disruption and biomass solubilization before undergoing anaerobic digestion. This paper summarises the state of the art of different pretreatment techniques used for improving microalgae anaerobic biodegradability. Pretreatments were divided into 4 categories: (i) thermal; (ii) mechanical; (iii) chemical and (iv) biological methods. According to experimental results, all of them are effective at increasing biomass solubilization and methane yield, pretreatment effect being species dependent. Pilot-scale research is still missing and would help evaluating the feasibility of full-scale implementation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Novel Concepts of Cooperative Wireless Networking

    DEFF Research Database (Denmark)

    Zhang, Qi

    2008-01-01

    ; secondly, the increasing density of the wireless devices makes cooperation possible; last, the cost of information exchange (i.e. transmission power, transmission time, spectrum, etc.) is very low if information exchange over short-range link is needed. Cooperation changes the way of information delivery...... for a cognitive radio MAC protocol. Finally, a novel modulation, hierarchical modulation, is used to facilitate the uplink transmission in cooperative networks. Simulation and analytical analysis has been conducted. Great potentials of cooperation are shown in improving the energy effciency, spectrum effciency......Although wireless networks have achieved great success in the lastest two decades, the current wireless networks have difficulties to fulll users' ever-increasing expectations and needs. It is mainly due to available spectrum resource scarcity, limited battery capacity of wireless device...

  6. Wireless technology in disease management and medicine.

    Science.gov (United States)

    Clifford, Gari D; Clifton, David

    2012-01-01

    Healthcare information, and to some extent patient management, is progressing toward a wireless digital future. This change is driven partly by a desire to improve the current state of medicine using new technologies, partly by supply-and-demand economics, and partly by the utility of wireless devices. Wired technology can be cumbersome for patient monitoring and can restrict the behavior of the monitored patients, introducing bias or artifacts. However, wireless technologies, while mitigating some of these issues, have introduced new problems such as data dropout and "information overload" for the clinical team. This review provides an overview of current wireless technology used for patient monitoring and disease management. We identify some of the major related issues and describe some existing and possible solutions. In particular, we discuss the rapidly evolving fields of telemedicine and mHealth in the context of increasingly resource-constrained healthcare systems.

  7. Improvements in Production of Single-Walled Carbon Nanotubes

    Science.gov (United States)

    Balzano, Leandro; Resasco, Daniel E.

    2009-01-01

    A continuing program of research and development has been directed toward improvement of a prior batch process in which single-walled carbon nanotubes are formed by catalytic disproportionation of carbon monoxide in a fluidized-bed reactor. The overall effect of the improvements has been to make progress toward converting the process from a batch mode to a continuous mode and to scaling of production to larger quantities. Efforts have also been made to optimize associated purification and dispersion post processes to make them effective at large scales and to investigate means of incorporating the purified products into composite materials. The ultimate purpose of the program is to enable the production of high-quality single-walled carbon nanotubes in quantities large enough and at costs low enough to foster the further development of practical applications. The fluidized bed used in this process contains mixed-metal catalyst particles. The choice of the catalyst and the operating conditions is such that the yield of single-walled carbon nanotubes, relative to all forms of carbon (including carbon fibers, multi-walled carbon nanotubes, and graphite) produced in the disproportionation reaction is more than 90 weight percent. After the reaction, the nanotubes are dispersed in various solvents in preparation for end use, which typically involves blending into a plastic, ceramic, or other matrix to form a composite material. Notwithstanding the batch nature of the unmodified prior fluidized-bed process, the fluidized-bed reactor operates in a continuous mode during the process. The operation is almost entirely automated, utilizing mass flow controllers, a control computer running software specific to the process, and other equipment. Moreover, an important inherent advantage of fluidized- bed reactors in general is that solid particles can be added to and removed from fluidized beds during operation. For these reasons, the process and equipment were amenable to

  8. Quarkonium Production in an Improved Color Evaporation Model

    CERN Document Server

    Ma, Yan-Qing

    2016-01-01

    We propose an improved version of the color evaporation model to describe heavy quarkonium production. In contrast to the traditional color evaporation model, we impose the constraint that the invariant mass of the intermediate heavy quark-antiquark pair to be larger than the mass of produced quarkonium. We also introduce a momentum shift between heavy quark-antiquark pair and the quarkonium. Numerical calculations show that our model can describe the charmonium yields as well as ratio of $\\psi^\\prime$ over $J/\\psi$ better than the traditional color evaporation model.

  9. Vector Design for Improved DNA Vaccine Efficacy, Safety and Production

    Directory of Open Access Journals (Sweden)

    James A. Williams

    2013-06-01

    Full Text Available DNA vaccination is a disruptive technology that offers the promise of a new rapidly deployed vaccination platform to treat human and animal disease with gene-based materials. Innovations such as electroporation, needle free jet delivery and lipid-based carriers increase transgene expression and immunogenicity through more effective gene delivery. This review summarizes complementary vector design innovations that, when combined with leading delivery platforms, further enhance DNA vaccine performance. These next generation vectors also address potential safety issues such as antibiotic selection, and increase plasmid manufacturing quality and yield in exemplary fermentation production processes. Application of optimized constructs in combination with improved delivery platforms tangibly improves the prospect of successful application of DNA vaccination as prophylactic vaccines for diverse human infectious disease targets or as therapeutic vaccines for cancer and allergy.

  10. Wireless Intrusion Prevention Systems

    Directory of Open Access Journals (Sweden)

    Jack TIMOFTE

    2008-01-01

    Full Text Available The wireless networks have changed the way organizations work and offered a new range of possibilities, but at the same time they introduced new security threats. While an attacker needs physical access to a wired network in order to launch an attack, a wireless network allows anyone within its range to passively monitor the traffic or even start an attack. One of the countermeasures can be the use of Wireless Intrusion Prevention Systems.

  11. Orinoco Outdoor Wireless LAN

    OpenAIRE

    ECT Team, Purdue

    2007-01-01

    Wireless communication allows mobile communications to be located at various places within a construction site and communicate with each other as well as with a central, fixed location such as the jobsite trailer. Wireless LAN is one of the wireless data communication technologies that can be used in a jobsite. The Orinoco Outdoor system consists of Central Outdoor Router(COR), Remote Outdoor Router(ROR) and Internet Client Software.

  12. Wireless Virtual Joystick

    OpenAIRE

    Hu, Yuning

    2013-01-01

    Wireless Virtual Joystick is an Android application which enables users to use their Android mobile device act like a real joystick. It provides a solution to establish a wireless connection between Android mobile device and server computer. Whenever the server receives correct message, the server will simulate a virtual joystick input signal. Wireless Virtual Joystick does not worry about the small space, wires jam or USB port limitation. The objective of this thesis project is to develop a ...

  13. Improving Buffalo Milk Production to Sustain the Production of Dadih by Small Farmers in West Sumatera

    Directory of Open Access Journals (Sweden)

    Wirdahayati R B

    2007-12-01

    Full Text Available The swamp buffalo which is found in many Asian regions is mainly raised for meat and draft purposes. However, in West Sumatera, it is also milked and the milk is mostly consumed as “dadih“, a well known traditional product from this area. Dadih is actually a product made from fresh buffalo milk, which is kept in bamboo tube for about 2-3 days under room temperature, without any application or addition of bacteria starter although the end product of this fermentation contains various bacteria, mould and khamir. As the natural fermented milk product, dadih is white in colour and the curd texture like tofu, tastes like yoghurt, and it is generally served as a complementing meal in some traditional occasion as well as delicacy from West Sumatera. Dadih is highly nutritive product, protein and fat contents are higher than those of yoghurt, rich in amino acids and bacteria such as Lactobacillus sp. and low in cholesterol. The raw material for dadih is limited due to the low productivity of fresh buffalo milk which is generally collected for about 0.5 – 2.0 litres/head/day. The effort in sustaining “dadih product“ is directed to the improving the management of the buffalo condition particularly those in lactating period. Feeding improvement is recommended in order to provide an adequate milk for raising its calf and to be milked for making dadih and to support the optimal reproductive activity of the buffalo dam. In future, the assessment on “dadih“ should also include the packaging improvement which can improve and prolong the storage time for the benefit of marketing purposes.

  14. Greenhouse gas emissions in milk and dairy product chains: Improving the carbon footprint of dairy products

    Energy Technology Data Exchange (ETDEWEB)

    Flysjoe, A.M.

    2012-11-01

    The present PhD project has focused on some of the most critical methodological aspects influencing GHG emission estimates of milk and dairy products and how the methodology can be improved. In addition, the Carbon Footprint (CF) for different types of dairy products has been analysed. Based on these results, mitigation options have been identified along the entire dairy value chain. The key methodological challenges analysed in the present study are: estimation of CH{sub 4} and N{sub 2}O emissions, assessment of CO{sub 2} emissions from land use change (LUC), co-product handling, and definition of the functional unit. Estimates of the biogenic emissions CH{sub 4} and N{sub 2}O are associated with large uncertainties due to the complexity and natural variation in biological processes. Accounting for these variations resulted in a {+-}30-50% variation in the CF for milk in Sweden and New Zealand (excluding emissions from LUC). The inclusion of emissions from LUC can drastically affect the CF of dairy products, and different models can even provide contradictory results. Thus, it is suggested that emissions associated with LUC are reported separately and that underlying assumptions are clearly explained. Accounting for the by-product beef is decisive for the CF of milk, and when designing future strategies for the dairy sector, milk and meat production needs to be addressed in an integrated approach. It is shown that an increase in milk yield per cow does not necessarily result in a lower CF of milk, when taking into account the alternative production of the by-product beef. This demonstrates that it is important to investigate interactions between different product chains, i.e. to apply system thinking. The CF of dairy products from Arla Foods analysed in the present study range from: 1.2-5.5 kg CO{sub 2}e per kg fresh dairy products, 7.3-10.9 kg CO{sub 2}e per kg butter and butter blends, 4.5-9.9 kg CO{sub 2}e per kg cheese, and 1.0-17.4 kg CO{sub 2}e per kg milk

  15. 基于锚同心圆的改进加权质心WSN定位算法%An Improved Weighted Centroid Localization Algorithm Based on Concentric Anchor- Beacons for Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    李尧尧; 廖红云; 曾孝平; 吴小林

    2011-01-01

    Concentric anchor beacons (CAB) localization algorithm is a range -free wireless sensor networks localization algorithm. Comparing with the traditional range localization algorithm, although it can reduce the nodes energy consumption, the localization accuracy is no better than traditional range localization approaches. In order to further improve the accuracy of localizing nodes, an improved weighted centroid algorithm based on CAB is proposed after analyzing the radio propagation path loss. First, the process of this improved algorithm is introduced. Then, the influence of communication radius on the accuracy of this new localization algorithm was simulated. After that, the accuracy of this localization algorithm were compared with the existing several kinds of range - free localization methods. Simulation results show that this new algorithm has a higher positioning accuracy and not sensitive to communication radius, and it has some value in productive practice.%研究无线传感器定位准确性问题,针对测量位置节点信息,为了提高无线传感器网络的定位精度,采用同心圆定位算法(CAB)是一种免测距的无线传感器定位算法,相比于传统的测距方法能降低节点的能量消耗,但是定位精度却不及传统的测距定位方法.提出在同心圆定位算法(CAB)的基础上,通过分析无线电传播路径损耗采用了一种加权同心圆定位算法.给出了算法的流程,仿真分析了通信半径对新算法定位精度的影响,比较了算法定位精度与现有的几种免测距定位方法的定位精度.仿真结果表明,改进算法有较高的定位精度而且对距离不敏感,对实际工程提供应用价值.

  16. Wireless security in mobile health.

    Science.gov (United States)

    Osunmuyiwa, Olufolabi; Ulusoy, Ali Hakan

    2012-12-01

    Mobile health (m-health) is an extremely broad term that embraces mobile communication in the health sector and data packaging. The four broad categories of wireless networks are wireless personal area network, wireless metropolitan area network, wireless wide area network, and wireless local area network. Wireless local area network is the most notable of the wireless networking tools obtainable in the health sector. Transfer of delicate and critical information on radio frequencies should be secure, and the right to use must be meticulous. This article covers the business opportunities in m-health, threats faced by wireless networks in hospitals, and methods of mitigating these threats.

  17. Wireless Sensor Network for Advanced Energy Management Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Peter J. Theisen; Bin Lu, Charles J. Luebke

    2009-09-23

    Eaton has developed an advanced energy management solution that has been deployed to several Industries of the Future (IoF) sites. This demonstrated energy savings and reduced unscheduled downtime through an improved means for performing predictive diagnostics and energy efficiency estimation. Eaton has developed a suite of online, continuous, and inferential algorithms that utilize motor current signature analysis (MCSA) and motor power signature analysis (MPSA) techniques to detect and predict the health condition and energy usage condition of motors and their connect loads. Eaton has also developed a hardware and software platform that provided a means to develop and test these advanced algorithms in the field. Results from lab validation and field trials have demonstrated that the developed advanced algorithms are able to detect motor and load inefficiency and performance degradation. Eaton investigated the performance of Wireless Sensor Networks (WSN) within various industrial facilities to understand concerns about topology and environmental conditions that have precluded broad adoption by the industry to date. A Wireless Link Assessment System (WLAS), was used to validate wireless performance under a variety of conditions. Results demonstrated that wireless networks can provide adequate performance in most facilities when properly specified and deployed. Customers from various IoF expressed interest in applying wireless more broadly for selected applications, but continue to prefer utilizing existing, wired field bus networks for most sensor based applications that will tie into their existing Computerized Motor Maintenance Systems (CMMS). As a result, wireless technology was de-emphasized within the project, and a greater focus placed on energy efficiency/predictive diagnostics. Commercially available wireless networks were only utilized in field test sites to facilitate collection of motor wellness information, and no wireless sensor network products were

  18. Wireless Sensor Network for Advanced Energy Management Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Peter J. Theisen; Bin Lu, Charles J. Luebke

    2009-09-23

    Eaton has developed an advanced energy management solution that has been deployed to several Industries of the Future (IoF) sites. This demonstrated energy savings and reduced unscheduled downtime through an improved means for performing predictive diagnostics and energy efficiency estimation. Eaton has developed a suite of online, continuous, and inferential algorithms that utilize motor current signature analysis (MCSA) and motor power signature analysis (MPSA) techniques to detect and predict the health condition and energy usage condition of motors and their connect loads. Eaton has also developed a hardware and software platform that provided a means to develop and test these advanced algorithms in the field. Results from lab validation and field trials have demonstrated that the developed advanced algorithms are able to detect motor and load inefficiency and performance degradation. Eaton investigated the performance of Wireless Sensor Networks (WSN) within various industrial facilities to understand concerns about topology and environmental conditions that have precluded broad adoption by the industry to date. A Wireless Link Assessment System (WLAS), was used to validate wireless performance under a variety of conditions. Results demonstrated that wireless networks can provide adequate performance in most facilities when properly specified and deployed. Customers from various IoF expressed interest in applying wireless more broadly for selected applications, but continue to prefer utilizing existing, wired field bus networks for most sensor based applications that will tie into their existing Computerized Motor Maintenance Systems (CMMS). As a result, wireless technology was de-emphasized within the project, and a greater focus placed on energy efficiency/predictive diagnostics. Commercially available wireless networks were only utilized in field test sites to facilitate collection of motor wellness information, and no wireless sensor network products were

  19. Implementing quality/productivity improvement initiatives in an engineering environment

    Science.gov (United States)

    Ruda, R. R.

    1985-01-01

    Quality/Productivity Improvement (QPI) initiatives in the engineering environment at McDonnell Douglas-Houston include several different, distinct activities, each having its own application, yet all targeted toward one common goal - making continuous improvement a way of life. The chief executive and the next two levels of management demonstrate their commitment to QPI with hands-on involvement in several activities. Each is a member of a QPI Council which consists of six panels - Participative Management, Communications, Training, Performance/Productivity, Human Resources Management and Strategic Management. In addition, each manager conducts Workplace Visits and Bosstalks, to enhance communications with employees and to provide a forum for the identification of problems - both real and perceived. Quality Circles and Project Teams are well established within McConnel Douglas as useful and desirable employee involvement teams. The continued growth of voluntary membership in the circles program is strong evidence of the employee interest and management support that have developed within the organization.

  20. Wireless Emulation Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Wireless Emulation Laboratory (WEL) is a researchtest bed used to investigate fundamental issues in networkscience. It is a research infrastructure that emulates...

  1. Adaptive Wireless Transceiver Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Wireless technologies are an increasingly attractive means for spatial data, input, manipulation, and distribution. Mobitrum is proposing an innovative Adaptive...

  2. Media Improvement for Hydrogen Production Using C. acetobutylicum NCIMB 13357

    Directory of Open Access Journals (Sweden)

    Mohd S. Kalil

    2009-01-01

    Full Text Available Problem statement: Some component of fermentation medium showed to reduce the bacterial production of hydrogen. Approach: Reinforced clostridium medium is a selected medium for Clostridium species. Reformulation this medium regarding hydrogen production may focus on such medium composition that enhance or reduce the bacterial productivity. The optimum pH and temperature for hydrogen production were at initial pH of 7.0 and 30°C. Results: The results show that both nitrogen source and its concentration affected biomass growth as well as H2 yield. Yeast extract at concentration of 13 gL-1 was the best organic nitrogen source and resulted in hydrogen yield (YP/S of 308 mL g-1 glucose utilized with biomass concentration of 1.1 gL-1, hydrogen yield per biomass (YP/X of 280 mL g-1 L-1, biomass per substrate utilized (YX/S of 0.22 and produced hydrogen in gram per gram of glucose utilized (YH2/S of 0.0275. C/N of 70 enhanced the YP/S from 308 mL g-1 to 350 mL g-1 glucose utilized with biomass concentration of 1.22 gL-1, YP/X of 287 mL g-1 L-1, YX/S of 0.244 and (YH2/S of 0.03125. In the absence of sodium chloride and sodium acetate further enhanced YP/S from 350 mL g-1 glucose utilized to 391 mL g-1 glucose utilized with maximum hydrogen productivity of 77.5 mL L-1 h-1, whereas RCM medium gave the highest hydrogen productivity of 63.5 mL L-1h-1. Results also show that Sodium Chloride and Sodium Acetate in the medium adversely affect growth. Removal of both components from the medium enhanced the biomass concentration from 1.22-1.34 gL-1, YP/X of 254 mL g-1 L-1, YX/S of 0.268 and (YH2/S of 0.0349. Conclusion: The medium an improved containing (glucose 5 gL-1, Yeast extract gL-1, L-Cystine. HCl 1 gL-1 and Bacteriological agar 0.5 gL-1, was able to enhance the hydrogen productivity.

  3. Wireless Monitoring of Automobile Tires for Intelligent Tires.

    Science.gov (United States)

    Matsuzaki, Ryosuke; Todoroki, Akira

    2008-12-09

    This review discusses key technologies of intelligent tires focusing on sensors and wireless data transmission. Intelligent automobile tires, which monitor their pressure, deformation, wheel loading, friction, or tread wear, are expected to improve the reliability of tires and tire control systems. However, in installing sensors in a tire, many problems have to be considered, such as compatibility of the sensors with tire rubber, wireless transmission, and battery installments. As regards sensing, this review discusses indirect methods using existing sensors, such as that for wheel speed, and direct methods, such as surface acoustic wave sensors and piezoelectric sensors. For wireless transmission, passive wireless methods and energy harvesting are also discussed.

  4. Wireless Monitoring of Automobile Tires for Intelligent Tires

    Directory of Open Access Journals (Sweden)

    Akira Todoroki

    2008-12-01

    Full Text Available This review discusses key technologies of intelligent tires focusing on sensors and wireless data transmission. Intelligent automobile tires, which monitor their pressure, deformation, wheel loading, friction, or tread wear, are expected to improve the reliability of tires and tire control systems. However, in installing sensors in a tire, many problems have to be considered, such as compatibility of the sensors with tire rubber, wireless transmission, and battery installments. As regards sensing, this review discusses indirect methods using existing sensors, such as that for wheel speed, and direct methods, such as surface acoustic wave sensors and piezoelectric sensors. For wireless transmission, passive wireless methods and energy harvesting are also discussed.

  5. From teaching to learning in a mobile, wireless world.

    Science.gov (United States)

    Billings, Diane M

    2005-08-01

    What research evidence justifies this shift from teaching to learning in the mobile, wireless world? We do not need evidence to answer questions such as, "Will the mobile, wireless device technology support teaching and learning?" (we already know it will), or "Will distance learning with mobile, wireless devices be as effective as that in the classroom?" (abundant evidence indicates there will be no significant differences). However, we do need to know, "How can we use these learning technologies to improve student learning and the outcomes of our academic programs?" Answers to this question will ultimately help educators prepare students to deliver safe and competent patient care in the mobile, wireless world.

  6. Improved endoglucanase production and mycelial biomass of some ericoid fungi.

    Science.gov (United States)

    Adeoyo, O R; Pletschke, B I; Dames, J F

    2017-12-01

    Fungal species associated with ericaceous plant roots produce a number of enzymes and other bio-active metabolites in order to enhance survival of their host plants in natural environments. This study focussed on endoglucanase production from root associated ericoid mycorrhizal and dark septate endophytic fungal isolates. Out of the five fungal isolates screened, Leohumicola sp. (ChemRU330/PPRI 13195) had the highest relative enzyme activity and was tested along with isolates belonging to Hyloscyphaceae (EdRU083/PPRI 17284) and Leotiomycetes (EdRU002/PPRI 17261) for endoglucanase production under different pH and nutritional conditions that included: carbon sources, nitrogen sources and metal ions, at an optimum temperature of 28 °C. An optimal of pH 5.0 produced enzyme activity of 3.99, 2.18 and 4.31 (U/mg protein) for isolates EdRU083, EdRU002 and Leohumicola sp. respectively. Increased enzyme activities and improved mycelial biomass production were obtained in the presence of supplements such as potassium, sodium, glucose, maltose, cellobiose, tryptone and peptone. While NaFe-EDTA and Co(2+) inhibited enzyme activity. The potential role of these fungi as a source of novel enzymes is an ongoing objective of this study.

  7. Fisher Pierce products for improving distribution system reliability

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The challenges facing the electric power utility today in the 1990s has changed significantly from those of even 10 years ago. The proliferation of automation and the personnel computer have heightened the requirements and demands put on the electric distribution system. Today`s customers, fighting to compete in a world market, demand quality, uninterrupted power service. Privatization and the concept of unregulated competition require utilities to streamline to minimize system support costs and optimize power delivery efficiency. Fisher Pierce, serving the electric utility industry for over 50 years, offers a line of products to assist utilities in meeting these challenges. The Fisher Pierce Family of products provide tools for the electric utility to exceed customer service demands. A full line of fault indicating devices are offered to expedite system power restoration both locally and in conjunction with SCADA systems. Fisher Pierce is the largest supplier of roadway lighting controls, manufacturing on a 6 million dollar automated line assuring the highest quality in the world. The distribution system capacitor control line offers intelligent local or radio linked switching control to maintain system voltage and Var levels for quality and cost efficient power delivery under varying customer loads. Additional products, designed to authenticate revenue metering calibration and verify on sight metering service wiring, help optimize the profitability of the utility assuring continuous system service improvements for their customers.

  8. The potential of transgenic animals for improved agricultural productivity.

    Science.gov (United States)

    Ward, K A; Nancarrow, C D; Byrne, C R; Shanahan, C M; Murray, J D; Leish, Z; Townrow, C; Rigby, N W; Wilson, B W; Hunt, C L

    1990-09-01

    The techniques involved in the transfer of foreign DNA to domestic animals have advanced to the stage where transgenic animals that express foreign genes can be reliably produced, albeit still at low efficiency. This paper reviews the current status of some of the more important areas in agriculture where this technology is being applied. Numerous attempts have been made to modify the growth performance characteristics of domestic animals by the introduction of metallothionein/growth hormone fusion genes. A summary of our work with transgenic sheep is presented. The results demonstrate that the unregulated production of growth hormone in transgenic sheep reduces carcass fat, elevates metabolic rate and heat production, causes skeletal abnormalities and impairs survival. The introduction of new metabolic pathways to domestic animals offers an attractive approach to improved animal productivity. This paper summarises recent results of research directed towards the introduction of a cysteine biosynthetic pathway and the glyoxylate cycle to transgenic sheep. So far, the genes encoding the enzymes have been isolated and expressed both in cells in culture and in transgenic mice. The results of work currently in progress demonstrate that some modification of the fusion genes is required to enhance their expression in transgenic animals.

  9. Applying Network Technology to Improve TV News Production Mode

    Institute of Scientific and Technical Information of China (English)

    冷劲松; 林成栋

    2003-01-01

    With the development of database and computer network technology, traditional TV news production mode (TVNPM) faces great challenge. Up to now, evolution of TVNPM has experienced two stages: In the beginning, TV news is produced completely by hand, named as pipelining TVNPM in this paper. This production mode is limited to space and time, so its production cycle is very time-consuming, and it requires a lot of harmony in different departments; Subsequently, thanks to applications of database technology, a new TVNPM appears, which is named as pooled information resource TVNPM. Compared with pipelining TVNPM, this mode promotes information sharing. However, with the development of network technology, especially the Intranet and the Internet, the pooled information resource TVNPM receives strong impact, and it is referred to contrive a new TVNPM. This new TVNPM must support information sharing, remote collaboration, and interaction in communications so as to improve group work efficiency. In this paper, we present such a new TVNPM, namely, Network TVNPM, give a suit of system solution to support the new TVNPM, introduce the new workflow, and in the end analyze the advantages of Network TVNPM.

  10. Trapping truffle production in holes: a promising technique for improving production and unravelling truffle life cycle

    Directory of Open Access Journals (Sweden)

    Claude Murat

    2016-10-01

    Full Text Available The Périgord black truffle, Tuber melanosporum Vittad., is an ectomycorrhizal fungus that forms edible hypogeous ascomata. It is now harvested in plantations and is recognized as an agricultural product by European policy. Empirical techniques without scientific demonstration of their efficiency are often used to improve the production of truffles in plantations. One of these techniques is “truffle trapping” which consists in practicing holes inside the potential productive area and to fill them with a substrate containing ascospores. We report an experiment in a truffle orchard where 784 holes were set under 196 trees. Two years after the installation of the holes, 95% of the truffles were found inside the holes corresponding to only 5% of the productive area. This study confirms the efficiency of this empirical technique and demonstrates new ways for in situ studies of the truffle life cycle.

  11. BIOCHAR TO IMPROVE THE QUALITY AND PRODUCTIVITY OF SOILS

    Directory of Open Access Journals (Sweden)

    Mariola Ścisłowska

    2015-06-01

    Full Text Available The paper presents the results of research focused on the investigations of the possibilities to use biochar to improve the quality and productivity of soils. Biochar is a material similar to the commonly known charcoal obtained from the thermolysis process (a process similar to dry distillation of wood. The structure and technical properties of biochar depend on the type of biomass which is produced and the thermal decomposition process conditions: process time, temperature and atmosphere. It was found that a positive effect of biochar on the soil properties is manifested through the improvement of soil fertility, better water retention, improvement of the cation exchange, and the regulation of the pH. The biochar used in the present study was obtained by autothermal thermolysis of biomass at 300 °C. Three types of biochars of different origin were used. The biochar samples were subjected to ultimate and proximate analysis, as well as structural and porosimetric investigations. The experimental research were also conducted on the experimental test field and gave a positive effect of the presence of biochar on soil quality and plant yield. Biochar introduced into soil allows for long-term storage of carbon. The introduction of biochar to soil has a positive effect on plant growth, higher dose resulted in an increase in biochar and plant mass.

  12. Bioenergy and biofertilizer : improvement of biogas production from filter cake

    Energy Technology Data Exchange (ETDEWEB)

    Fonte, A.H. [Environmental Bioremediation Group, Research and Development Agency, GeoCuba, Camaguey (Cuba); Alvarez, R.C. [Provincial Direction of Soils, Camaguey (Cuba)

    2000-07-01

    The anaerobic digestion of sugar mill filter cake (SMFC) was studied using a natural zeolite to intensify the biogas production. The anaerobic digestion (AD) of agricultural waste mixtures in certain proportions is the underlying basis of biogas generation. Earlier studies have shown that certain inert materials can act as stimulators in biogas production when used in conjunction with AD. This study involved three experiments using filter cake from different sugar mills using three doses of zeolite to determine how they stimulate biogas production. Another objective of the study was to determine if the mud of the digester containing the added zeolite has an impact on plants and soil. The study was conducted under glass house conditions using a brown soil with carbonates with neutral pH and high contents of P{sub 2}O{sub 5}, K{sub 2}O and organic matter. It was concluded that it is possible to increase the biogas yield and to improve AD behaviour of the filter cake by using a zeolite adapted to unique operating conditions. The amount of yield depends on the origin of the filter cake, the stimulator dose and age. Results were in the order of 20-40 per cent biogas production. Fresh filter cake was found to produce more biogas. The mud of the anaerobic digestion of the filter cake containing zeolite positively impacted on the agronomic behaviour of the sorghum in relation to P{sub 2}O{sub 5}, K{sub 2}O and organic matter content. 19 refs., 4 tabs.

  13. Quality and productivity improvement program (PPKP) from alumni perspective

    Science.gov (United States)

    Ruza, Nadiah; Mustafa, Zainol

    2013-04-01

    Defining the quality of the university education system is not easy. Institutions of higher education, through curriculum are hoped to provide the knowledge, wisdom and personality of students. It is questionable of how far Quality and Productivity Improvement Program (PPKP) are capable to ensure the courses offered relevant and effective in preparing the students for job market. The effectiveness of a university to undertake responsibilities and the impact given to students even after they graduate can be a measure of education quality at university. So, the quality of education can be enhanced and improved from time to time. In general, this study is aims to determine the effectiveness of PPKP's education system from the perspective of their alumni as well as their satisfaction and the importance level based on how PPKP be able to meet their needs. In overall, summary of open-ended questions from the questionnaire, Importance-Performance analysis and correlation analysis were conducted for this study. Based on result, it appears that there are still some deficiencies that can be improve, particularly in terms of teaching skills and PPKP's relationships with external organizations to enable knowledge be channel effectively. Importance-Performance analysis highlights some topics or courses that should be offered by PPKP based on their importance in industrial practice. Summary of the results of correlation analysis was found that women are more positive and not too demanding compared to men. In addition, it is found that the responsibilities and workload of the older generations, higher income and a high level of experience demands them to use and practice what they have learned during their studies at PPKP. Results of this study are hoped could be used to improve the quality of education system at PPKP.

  14. Wireless distributed computing for cyclostationary feature detection

    Directory of Open Access Journals (Sweden)

    Mohammed I.M. Alfaqawi

    2016-02-01

    Full Text Available Recently, wireless distributed computing (WDC concept has emerged promising manifolds improvements to current wireless technologies. Despite the various expected benefits of this concept, significant drawbacks were addressed in the open literature. One of WDC key challenges is the impact of wireless channel quality on the load of distributed computations. Therefore, this research investigates the wireless channel impact on WDC performance when the latter is applied to spectrum sensing in cognitive radio (CR technology. However, a trade-off is found between accuracy and computational complexity in spectrum sensing approaches. Increasing these approaches accuracy is accompanied by an increase in computational complexity. This results in greater power consumption and processing time. A novel WDC scheme for cyclostationary feature detection spectrum sensing approach is proposed in this paper and thoroughly investigated. The benefits of the proposed scheme are firstly presented. Then, the impact of the wireless channel of the proposed scheme is addressed considering two scenarios. In the first scenario, workload matrices are distributed over the wireless channel. Then, a fusion center combines these matrices in order to make a decision. Meanwhile, in the second scenario, local decisions are made by CRs, then, only a binary flag is sent to the fusion center.

  15. Improvements of soil quality for increased food production in Norway

    Science.gov (United States)

    Øygarden, Lillian; Klakegg, Ove; Børresen, Trond; Krogstad, Tore; Kjersti Uhlen, Anne

    2016-04-01

    Since the 1990ties, agricultural land in use in Norway has diminished and yields per hectare for cereals and forages have stagnated. An expert panel appointed to advice on how to increase Norwegian grain production emphasizes low profitability and poor soil quality as limiting factors. A White Paper from the Norwegian Government, Report No.9 (2011-2012), stated that the main goal for the agricultural sector is to increase food production proportional to the expected increase in population (20 % by 2030) in order to maintain self-sufficiency at the present level. This is the background for the interdisciplinary project AGROPRO "Agronomy for increased food production - Challenges and solutions" (2013 - 2017)" financed by the Norwegian research council. A mail goal is seeking possibilities for improvements in agronomic practices for increased and sustainable food production and to identify drivers and challenges for their implementation. Are the key to higher yields hidden in the soil? The paper present an overview of the research activities in the project and some results of the improvements of soil quality to minimize yield gap in cereal and forage production. Detailed new soil maps provide soil information on field scale of soil quality and the suitability for growing different crops like cereal production or vegetables. The detailed soil information is also beeing used for development and adaptation of the planning tool «Terranimo» to reduce risk of soil compaction.The farmer get available soil information for each field, provide information about the maschinery in use- tractors and equipment, tyres, pressure. The decision tool evaluate when the soil is suitable for tillage, calculate the risk of compaction for dry, moist and wet soil. New research data for compaction on Norwegian clay and silt soil are included. Climate change with wetter conditions gives challenges for growing cereals. The project is testing genetic variation in cereals for tolerance to water

  16. An energy efficient multipath routing algorithm for wireless sensor networks

    NARCIS (Netherlands)

    Dulman, Stefan; Wu, Jian; Havinga, Paul

    2003-01-01

    In this paper we introduce a new routing algorithm for wireless sensor networks. The aim of this algorithm is to provide on-demand multiple disjoint paths between a data source and a destination. Our Multipath On-Demand Routing Algorithm (MDR) improves the reliability of data routing in a wireless m

  17. CAD/CAM approach to improving industry productivity gathers momentum

    Science.gov (United States)

    Fulton, R. E.

    1982-01-01

    Recent results and planning for the NASA/industry Integrated Programs for Aerospace-Vehicle Design (IPAD) program for improving productivity with CAD/CAM methods are outlined. The industrial group work is being mainly done by Boeing, and progress has been made in defining the designer work environment, developing requirements and a preliminary design for a future CAD/CAM system, and developing CAD/CAM technology. The work environment was defined by conducting a detailed study of a reference design process, and key software elements for a CAD/CAM system have been defined, specifically for interactive design or experiment control processes. Further work is proceeding on executive, data management, geometry and graphics, and general utility software, and dynamic aspects of the programs being developed are outlined

  18. Can worksite nutritional interventions improve productivity and firm profitability?

    DEFF Research Database (Denmark)

    Jensen, Jørgen Dejgård

    2011-01-01

    Aims: This paper investigates whether and how worksite nutrition policies can improve employee productivity. Methods: The questions are pursued through a literature review, including a systematic search of literature – combined with literature identified from backward references – on randomized...... controlled or quasi-experimental worksite intervention trials and observational cross-sectional studies. Studies were selected on the basis of topic relevance, according to publication title and subsequently according to abstract content. A quality appraisal of the studies was based on study design...... and clarity in definition of interventions, as well as environmental and outcome variables. Results: The search identified 2,358 publications, 30 of which were found suitable for the review. Several of the reviewed studies suggest that diet-related worksite interventions have positive impacts on employees...

  19. Improving the productivity of solar still using evacuated tubes

    Directory of Open Access Journals (Sweden)

    Qays A.Rashak, Ala'a A. Jassim, Husam N. Khanfoos

    2016-01-01

    Full Text Available The nature of life and population growth makes the rate of water consumption to be very high, also the operation costs of the conventional methods of the desalination process are very expensive and unfriendly to the environment; therefor it is very important to find new, cheap, clean and simple methods for producing drinkable water such as solar energy desalination systems. To improve the performance of solar still by using evacuated tubes. The effect of parameter variables such as solar intensity, wind velocity, the tilt angle and numbers of the evacuated tubes are studied and then discussed. It can be concluded that the maximum productivity of water has achieved when the tilt angle of the evacuated tubes was 15˚ on the horizone using four evacuated tubes.

  20. Serial CSTR digester configuration for improving biogas production from manure

    DEFF Research Database (Denmark)

    Boe, Kanokwan; Angelidaki, Irini

    2009-01-01

    A new configuration of manure digesters for improving biogas production has been investigated in laboratory scale. A single thermophilic continuous-flow stirred tank reactor (CSTR) operated with a hydraulic retention time (HRT) of 15 days was compared to a serial CSTR configuration with volume...... distribution ratio of 80/20 and 90/10, and total HRT of 15 days. The results showed that the serial CSTR could obtain 11% higher biogas yield compared to the single CSTR. The increased biogas yield in the serial CSTR was mainly from the second reactor, which accounted for 16% and 12% of total biogas yield...... in the 90/10 and 80/20 configuration, respectively. VFA concentration in the serial CSTR was high in the first reactor but very low in the second reactor. The results from organic pulse load test showed that the second reactor in serial CSTR helped utilizing VFA produced from overloading in the first...

  1. Biochar amendment improves soil fertility and productivity of mulberry plant

    Directory of Open Access Journals (Sweden)

    Faruque Ahmed

    2017-07-01

    Full Text Available Biochar has the potential to improve soil fertility and crop productivity. A field experiment was carried out at the experimental field of Bangladesh Sericulture Research and Training Institute (BSRTI, Rajshahi, Bangladesh. The objective of this study was to examine the effect of biochar on soil properties, growth, yield and foliar disease incidence of mulberry plant. The study consisted of 6 treatments: control, basal dose of NPK, rice husk biochar, mineral enriched biochar, basal dose + rice husk biochar and basal dose + mineral enriched biochar. Growth parameters such as node/meter, total branch number/plant, total leaf yield/hectare/year were significantly increased in basal dose + mineral enriched biochar treated plot in second year compared with the other fertilizer treatments. In second year, the total leaf yield/hectare/year were also 142.1% and 115.9% higher in combined application of basal dose + mineral enriched biochar and basal dose + rice husk biochar, respectively, than the control treatment. The soil properties such as organic matter, phosphorus, sulphur and zinc percentage were significantly increased with both the (mineral enriched and rice husk biochar treated soil applied with or without recommended basal dose of NPK than the control and only the recommended basal dose of NPK, respectively. Further, the lowest incidences of tukra (6.4%, powdery mildew (10.4% and leaf spot (7.6% disease were observed in second year under mineral enriched biochar treated plot than the others. The findings revealed that utilization of biochar has positive effect on the improvement of soil fertility and productivity as well as disease suppression of mulberry plant.

  2. Improvements of SMILES Level 2 products on ISAS/JAXA

    Science.gov (United States)

    Mitsuda, Chihiro; Suzuki, Makoto; Iwata, Yoshitaka; Manago, Naohiro; Takahashi, Chikako; Imai, Koji; Shiotani, Masato; Sano, Takuki; Takayanagi, Masahiro; Taniguchi, Hirotomo

    The Superconducting Submillimeter-wave Limb-Emission Sounder (SMILES),which was jointly developed by JAXA and NICT, had been launched and aboard the Japanese Experiment Mod-ule (JEM) of the International Space Station (ISS) in September, 2009. The SMILES carries 4 K-cooled Superconductor-Insulator-Superconductor (SIS) mixers to demonstrate a sensitive instrument for sub-millimeter limb sounding. SMILES system noise temperature (Tsys) is less than 500K (random noise ¡ 1 K). Since ISS has a non-sun-synchronous orbit, SMILES can observe diurnal variations of ClO, BrO, HO2 and mesospheric O3 etc. Standard L2 products, which are defined as O3, HCl, ClO, HNO3, CH3CN, HOCl, HO2, BrO, O3-isotopes on stratospheres, began to be released to RA PIs on January, 2010. The L2 data is currently 4 85 km, with 3 km interval (geometrical altitude) in HDF ver.5 file format similar to EOS-HDF including time, location etc.However, release data (ver. 005-06-0024) is a test version which is retrieved by prelaunch algorithms (Rodgers 1976. SMILES mission plan 2002. Takahashi et al., 2010. Imai et al., 2010.), and has some known issues. The one of the main issue is less product data. SMILES observes 1630 scans per a day. However, release products include only 60 percents of observation data. There are two reasons for this. The first is that antenna main beam is interfered by the ISS solar paddles. The second is that star tracker cameras, which determine SMILES observation points, are interfered by the Sun. In latter case, if we estimate the points by other information, geophysical parameters are retrieved since observed spectrums are useful. In new release data, we use both STT and ISS information and 80 percents of the data are included to products. In this presentation, we will introduce improvements of operational level 2 processing for new release product version.

  3. Bacon Production: Evaluating Potential Processing and Management Practices to Improve Product Quality of Industrial Sliced Bacon

    Science.gov (United States)

    Scramlin, Stacy Maurine

    2009-01-01

    The objective of this research was to determine areas of improvement to bacon production. The first trial was conducted to determine differences in belly and bacon quality traits in pigs fed ractopamine (RAC) for various durations during finishing. A 2x3x2 factorial arrangement was used with barrows and gilts, fed RAC levels of 0.0, 5.0, or 7.4…

  4. Bacon Production: Evaluating Potential Processing and Management Practices to Improve Product Quality of Industrial Sliced Bacon

    Science.gov (United States)

    Scramlin, Stacy Maurine

    2009-01-01

    The objective of this research was to determine areas of improvement to bacon production. The first trial was conducted to determine differences in belly and bacon quality traits in pigs fed ractopamine (RAC) for various durations during finishing. A 2x3x2 factorial arrangement was used with barrows and gilts, fed RAC levels of 0.0, 5.0, or 7.4…

  5. Wireless mobile Internet security

    CERN Document Server

    Rhee, Man Young

    2013-01-01

      The mobile industry for wireless cellular services has grown at a rapid pace over the past decade. Similarly, Internet service technology has also made dramatic growth through the World Wide Web with a wire line infrastructure. Realization for complete wired/wireless mobile Internet technologies will become the future objectives for convergence of these technologies thr

  6. Lean production of taste improved lipidic sodium benzoate formulations.

    Science.gov (United States)

    Eckert, C; Pein, M; Breitkreutz, J

    2014-10-01

    Sodium benzoate is a highly soluble orphan drug with unpleasant taste and high daily dose. The aim of this study was to develop a child appropriate, individually dosable, and taste masked dosage form utilizing lipids in melt granulation process and tableting. A saliva resistant coated lipid granule produced by extrusion served as reference product. Low melting hard fat was found to be appropriate as lipid binder in high-shear granulation. The resulting granules were compressed to minitablets without addition of other excipients. Compression to 2mm minitablets decreased the dissolved API amount within the first 2 min of dissolution from 33% to 23%. The Euclidean distances, calculated from electronic tongue measurements, were reduced, indicating an improved taste. The reference product showed a lag time in dissolution, which is desirable for taste masking. Although a lag time was not achieved for the lipidic minitablets, drug release in various food materials was reduced to 2%, assuming a suitable taste masking for oral sodium benzoate administration.

  7. Improving biohydrogen production using Clostridium beijerinckii immobilized with magnetite nanoparticles.

    Science.gov (United States)

    Seelert, Trevor; Ghosh, Dipankar; Yargeau, Viviane

    2015-05-01

    In order to supplement the need for alternative energy resources within the near future, enhancing the production of biohydrogen with immobilized Clostridium beijerinckii NCIMB8052 was investigated. Magnetite nanoparticles were functionalized, with chitosan and alginic acid polyelectrolytes using a layer-by-layer method, to promote bacterial attachment. Cultivating C. beijerinckii with these nanoparticles resulted in a shorter lag growth phase and increased total biohydrogen production within 100-ml, 250-ml and 3.6-L reactors compared with freely suspended organisms. The greatest hydrogen yield was obtained in the 250-ml reactor with a value of 2.1 ± 0.7 mol H2/mol glucose, corresponding to substrate conversion and energy conversion efficiencies of 52 ± 18 and 10 ± 3 %, respectively. The hydrogen yields obtained using the immobilized bacteria are comparable to values found in literature. However, to make this process viable, further improvements are required to increase the substrate and energy conversion efficiencies.

  8. Environmental report for the Gasification Product Improvement Facility (GPIF)

    Energy Technology Data Exchange (ETDEWEB)

    Sadowski, R.S.; Skinner, W.H.; Norris, E.S.; Duck, R.R.; Hass, R.B.; Morgan, M.E.; Helble, J.J.; Johnson, S.A.

    1993-01-01

    The Fossil Energy Program has a mission to develop energy systems that utilize national coal resources in power systems with increased efficiency and environmental compatibility. Coal gasification technology is a versatile candidate that meets this goal. This two phased project consists primarily of the design, construction and operation of a 5-foot inside diameter (minimum) fixed-bed gasifier called PyGas{trademark} and supporting infrastructure (Phase I), and an additional follow on phase consisting of the design, construction and operation of a hot fuel gas cleanup unit (Phase II). Issues expected to be successfully overcome by PyGas{trademark} through its application in this test facility include the processing of high-swelling coals, which causes agglomeration in conventional fixed-bed gasifiers. Such coals comprise 87% of all eastern coals. Other issues expected to be eliminated or significantly reduced include: production of ash clinkers, production of ammonia, the presence of significant tars and fines, and the volatilization of alkalinity in the product fuel gas. A second portion of the NEPA report is concerned with the emission of toxic metal compounds by the gasification process improvement facility (GPIF). The GPIF facility will be located on site at the Fort Martin facility of Allegheny Power Company, and the energy produced (steam) will be directly used by Fort Martin to produce electricity. The coal used at the GPIF facility will be the same coal used by the utility. Therefore, the emissions of the GPIF will be put in context of the entire facility. The GPIF assessment will be divided into four sections: Estimation of the toxic metals content of the raw coal; calculation of the emissions from Fort Martin normally; an estimate of the emission from the GPIF; and a comparison of the two flows.

  9. A METHOD OF IMPROVING THE PRODUCTION OF BIOMASS OR A DESIRED PRODUCT FROM A CELL

    DEFF Research Database (Denmark)

    1998-01-01

    the F¿1? ATPase or portions thereof is expressed, may be selected from prokaryotes and eukaryotes. In particular the DNA encoding F¿1? or a portion thereof may be derived from bacteria and eukaryotic microorganisms such as yeasts, other fungi and cell lines of higher organisms and be selected from......The production of biomass or a desired product from a cell can be improved by inducing conversion of ATP to ADP without primary effects on other cellular metabolites or functions which is achieved by expressing an uncoupled ATPase activity in said cell and incubating the cell with a suitable...... substrate to produce said biomass or product. This is conveniently done by expressing in said cell the soluble part (F¿1?) of the membrane bound (F¿0?F¿1? type) H?+¿-ATPase or a portion of F¿1? exhibiting ATPase activity. The organism from which the F¿1? ATPase or portions thereof is derived, or in which...

  10. Extended lactations may improve cow health, productivity and reduce greenhouse gas emissions from organic dairy production

    DEFF Research Database (Denmark)

    Lehmann, Jesper Overgård; Mogensen, Lisbeth; Kristensen, Troels

    2014-01-01

    The concept of extended lactation is a break with the tradition of getting one calf per cow per year that should improve cow health, increase productivity and reduce greenhouse gas (GHG) emission per kg milk produced in high-yield organic dairy herds. These effects are achieved through fewer...... calvings per year and hence a production of fewer replacement heifers, which, in combination with fewer days dry per cow per year, will reduce the annual herd requirement for feed. Total herd feed use is a major determinant of GHG emission at farm gate. However, these effects also rely on the assumption...... of an unchanged milk production per feeding day (days lactating plus days dry) when changing from lactations of traditional length to extended lactations. Thus, milk yield per feeding day becomes a primary determinant of the success of using extended lactations at farm level. Cows undergoing an extended lactation...

  11. Dapagliflozin improves muscle insulin sensitivity but enhances endogenous glucose production.

    Science.gov (United States)

    Merovci, Aurora; Solis-Herrera, Carolina; Daniele, Giuseppe; Eldor, Roy; Fiorentino, Teresa Vanessa; Tripathy, Devjit; Xiong, Juan; Perez, Zandra; Norton, Luke; Abdul-Ghani, Muhammad A; DeFronzo, Ralph A

    2014-02-01

    Chronic hyperglycemia impairs insulin action, resulting in glucotoxicity, which can be ameliorated in animal models by inducing glucosuria with renal glucose transport inhibitors. Here, we examined whether reduction of plasma glucose with a sodium-glucose cotransporter 2 (SGLT2) inhibitor could improve insulin-mediated tissue glucose disposal in patients with type 2 diabetes. Eighteen diabetic men were randomized to receive either dapagliflozin (n = 12) or placebo (n = 6) for 2 weeks. We measured insulin-mediated whole body glucose uptake and endogenous glucose production (EGP) at baseline and 2 weeks after treatment using the euglycemic hyperinsulinemic clamp technique. Dapagliflozin treatment induced glucosuria and markedly lowered fasting plasma glucose. Insulin-mediated tissue glucose disposal increased by approximately 18% after 2 weeks of dapagliflozin treatment, while placebo-treated subjects had no change in insulin sensitivity. Surprisingly, following dapagliflozin treatment, EGP increased substantially and was accompanied by an increase in fasting plasma glucagon concentration. Together, our data indicate that reduction of plasma glucose with an agent that works specifically on the kidney to induce glucosuria improves muscle insulin sensitivity. However, glucosuria induction following SGLT2 inhibition is associated with a paradoxical increase in EGP. These results provide support for the glucotoxicity hypothesis, which suggests that chronic hyperglycemia impairs insulin action in individuals with type 2 diabetes.

  12. Biotechnological Strategies to Improve Plant Biomass Quality for Bioethanol Production

    Directory of Open Access Journals (Sweden)

    Julián Mario Peña-Castro

    2017-01-01

    Full Text Available The transition from an economy dependent on nonrenewable energy sources to one with higher diversity of renewables will not be a simple process. It requires an important research effort to adapt to the dynamics of the changing energy market, sort costly processes, and avoid overlapping with social interest markets such as food and livestock production. In this review, we analyze the desirable traits of raw plant materials for the bioethanol industry and the molecular biotechnology strategies employed to improve them, in either plants already under use (as maize or proposed species (large grass families. The fundamentals of these applications can be found in the mechanisms by which plants have evolved different pathways to manage carbon resources for reproduction or survival in unexpected conditions. Here, we review the means by which this information can be used to manipulate these mechanisms for commercial uses, including saccharification improvement of starch and cellulose, decrease in cell wall recalcitrance through lignin modification, and increase in plant biomass.

  13. Serial CSTR digester configuration for improving biogas production from manure.

    Science.gov (United States)

    Boe, Kanokwan; Angelidaki, Irini

    2009-01-01

    A new configuration of manure digesters for improving biogas production has been investigated in laboratory scale. A single thermophilic continuous-flow stirred tank reactor (CSTR) operated with a hydraulic retention time (HRT) of 15 days was compared to a serial CSTR configuration with volume distribution ratio of 80/20 and 90/10, and total HRT of 15 days. The results showed that the serial CSTR could obtain 11% higher biogas yield compared to the single CSTR. The increased biogas yield in the serial CSTR was mainly from the second reactor, which accounted for 16% and 12% of total biogas yield in the 90/10 and 80/20 configuration, respectively. VFA concentration in the serial CSTR was high in the first reactor but very low in the second reactor. The results from organic pulse load test showed that the second reactor in serial CSTR helped utilizing VFA produced from overloading in the first reactor, which improved the effluent quality and conversion efficiency of the serial CSTR.

  14. Generations of Wireless Technology

    Directory of Open Access Journals (Sweden)

    Gagan Preet Kaur

    2011-08-01

    Full Text Available Wireless communication is the transfer of information over adistance without the use of enhanced electrical conductors or"wires”. The distances involved may be short (a few meters as intelevision remote control or long (thousands or millions ofkilometres for radio communications. When the context is clear,the term is often shortened to "wireless". It encompasses varioustypes of fixed, mobile, and portable two-way radios, cellulartelephones, Personal Digital Assistants (PDAs, and wirelessnetworking. In this paper we will throw light on the evolution anddevelopment of various generations of mobile wireless technologyalong with their significance and advantages of one over theother. In the past few decades, the mobile wireless technologies haveexperience of various generations of technology revolution &evolution, namely from 0G to 4G. An advance implementation of 5Gtechnology which are being made on the development of World WideWireless Web (WWW

  15. Wireless communication with chaos.

    Science.gov (United States)

    Ren, Hai-Peng; Baptista, Murilo S; Grebogi, Celso

    2013-05-03

    The modern world fully relies on wireless communication. Because of intrinsic physical constraints of the wireless physical media (multipath, damping, and filtering), signals carrying information are strongly modified, preventing information from being transmitted with a high bit rate. We show that, though a chaotic signal is strongly modified by the wireless physical media, its Lyapunov exponents remain unaltered, suggesting that the information transmitted is not modified by the channel. For some particular chaotic signals, we have indeed proved that the dynamic description of both the transmitted and the received signals is identical and shown that the capacity of the chaos-based wireless channel is unaffected by the multipath propagation of the physical media. These physical properties of chaotic signals warrant an effective chaos-based wireless communication system.

  16. 无线通信的变革-Bluetooth技术概述及其产品描述%Change of Wireless Communication--Bluetooth Technology Summary and Its Products Introduction

    Institute of Scientific and Technical Information of China (English)

    杜亚娟; 倪明; 陆新; 刘昭红

    2001-01-01

    Bluetooth technology is not only reform of wireless technology, but also current study hot point. This paper summarizes Bluetooth technology, then describes kinds of products based on Bluetooth technology, points out the spread and application of Bluetooth technology.%Bluetooth技术是无线技术的变革,是当前的研究热点.首先对前沿Bluetooth技术进行了综述,进而对基于Bluetooth技术的几种产品进行了具体描述,指出了Bluetooth技术的推广性和应用性.

  17. IEEE 802.11 Wireless LAN Security White Paper

    Energy Technology Data Exchange (ETDEWEB)

    King, J

    2001-10-22

    Given the increased productivity and growing popularity of wireless communications in general, and wireless data communications in particular, this paper outlines the protocols, security implications, and architectures of IEEE Std. 802.11-1999 wireless LANs (WLANs) and makes recommendations regarding a phased implementation of WLANs at LLNL. This project is driven by the need for convenient and secure access to the Internet for Laboratory visitors and to the internal network for Laboratory employees. A solid architecture designed with a priority on security will allow LLNL to offer network access in areas where it is traditionally hard to deploy wired networks. It will also enable such services as wireless access for inventory control and convenient network access for conference rooms around LLNL. Wireless network access has the potential to increase productivity by enabling instant access to information.

  18. Analysis of sources of information for Improved Cassava Production ...

    African Journals Online (AJOL)

    ... Cassava Production Technology (ICPTS) in Biase Local Government Area, ... of new technologies in cassava production, high cost of fertilizers, high cost of ... pave a way to increase cassava production and farm income of stakeholders.

  19. An Improved Synthesis of the Natural Product Isorhapontigenin

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    We have developed an alternative route to synthesize the natural product, isorhapotogenin . The synthetic product was characterized by IR and 1H-NMR in comparison with the corresponding natural product.

  20. Wireless vehicular networks for car collision avoidance

    CERN Document Server

    2013-01-01

    Wireless Vehicular Networks for Car Collision Avoidance focuses on the development of the ITS (Intelligent Transportation Systems) in order to minimize vehicular accidents. The book presents and analyses a range of concrete accident scenarios while examining the causes of vehicular collision and proposing countermeasures based on wireless vehicular networks. The book also describes the vehicular network standards and quality of service mechanisms focusing on improving critical dissemination of safety information. With recommendations on techniques and protocols to consider when improving road safety policies in order to minimize crashes and collision risks.

  1. Association Analaysis in Wireless Network using Trace data

    Directory of Open Access Journals (Sweden)

    L.Velmurugan,

    2010-12-01

    Full Text Available With the explosive growth in wireless devices like smart phones, PDA’s, netbooks, WLAN networks are usually overloaded at workplaces, social and home environments. Though a large number of mobility models have been proposed, a better way is to study wireless mobility traces which gives more accurate movement information for a population. An accurate location predictor can significantly improve the performance or reliability of wireless network protocols and the wireless network infrastructure itself. These improvements lead to a better user experience to a more cost-effective infrastructure or both. In this work, it is proposed to study mobility traces and generate rules for mobility of users which was previously unknown in campus wide wireless network. We also study analyze and show that atcertain locations access points are very rarely used.

  2. Security for multihop wireless networks

    CERN Document Server

    Khan, Shafiullah

    2014-01-01

    Security for Multihop Wireless Networks provides broad coverage of the security issues facing multihop wireless networks. Presenting the work of a different group of expert contributors in each chapter, it explores security in mobile ad hoc networks, wireless sensor networks, wireless mesh networks, and personal area networks.Detailing technologies and processes that can help you secure your wireless networks, the book covers cryptographic coprocessors, encryption, authentication, key management, attacks and countermeasures, secure routing, secure medium access control, intrusion detection, ep

  3. Forage use to improve environmental sustainability of ruminant production.

    Science.gov (United States)

    Guyader, J; Janzen, H H; Kroebel, R; Beauchemin, K A

    2016-08-01

    Ruminants raised for meat and milk are important sources of protein in human diets worldwide. Their unique digestive system allows them to derive energy and nourishment from forages, making use of vast areas of grazing lands not suitable for arable cropping or biofuel production and avoiding direct competition for grain that can be used as human food. However, sustaining an ever-growing population of ruminants consuming forages poses a dilemma: while exploiting their ecological niche, forage-fed ruminants produce large amount of enteric methane, a potent greenhouse gas. Resolving this quandary would allow ruminants an expanded role in meeting growing global demands for livestock products. One way around the dilemma is to devise forage-based diets and feeding systems that reduce methane emissions per unit of milk or meat produced. Ongoing research has made significant strides toward this objective. A wider opportunity is to look beyond methane emissions alone and consider all greenhouse gas emissions from the entire livestock-producing system. For example, by raising ruminants in systems using forages, some of the methane emissions can be offset by preserving or enhancing soil carbon reserves, thereby withholding carbon dioxide from the air. Similarly, well-managed systems based on forages may reduce synthetic fertilizer use by more effective use of manure and nitrogen-fixing plants, thereby curtailing nitrous oxide emissions. The potential environmental benefits of forage-based systems may be expanded even further by considering their other ecological benefits, such as conserving biodiversity, improving soil health, enhancing water quality, and providing wildlife habitat. The quandary, then, can be alleviated by managing ruminants within a holistic land-livestock synchrony that considers not only methane emissions but also suppression of other greenhouse gases as well as other ecological benefits. Given the complexity of such systems, there likely are no singular

  4. Wireless nanosensor network system

    Science.gov (United States)

    Oh, Sechang; Kwon, Hyukjun; Kegley, Lauren; Yoon, Hargsoon; Varadan, Vijay K.

    2009-03-01

    Many types of wireless modules are being developed to enhance wireless performance with low power consumption, compact size, high data rates, and wide range coverage. However trade-offs must be taken into consideration in order to satisfy all aspects of wireless performance. For example, in order to increase the data rate and wide range coverage, power consumption should be sacrificed. To overcome these drawbacks, the paper presents a wireless client module which offers low power consumption along with a wireless receiver module that has the strength to provide high data rates and wide range coverage. Adopting Zigbee protocol in the wireless client module, the power consumption performance is enhanced so that it plays a part of the mobile device. On the other hand, the wireless receiver module, as adopting Zigbee and Wi-Fi protocol, provides high data rate, wide range coverage, and easy connection to the existing Internet network so that it plays a part of the portable device. This module demonstrates monitoring of gait analysis. The results show that the sensing data being measured can be monitored in any remote place with access to the Internet network.

  5. 基于无线Mesh网络技术构建无线城市%Construnction of Wireless City Based on Wireless Mesh Network

    Institute of Scientific and Technical Information of China (English)

    孙俊杰; 万鑫; 鄢妍; 谭金平

    2011-01-01

    无线Mesh网络(WMN)可以和多种无线网络系统,如无线局域网(WLAN)、无线城域网(WMAN)等相结合,改善无线网络的性能,提高网络的覆盖范围.以WMN网络技术在IEEE 802系列标准中的发展为基础,提出了一种无线城市的覆盖方案,最底层网络覆盖采用WiFi+wireless Mesh技术,WiMAX网络与WiFi+wireless Mesh技术结合.并对无线城市覆盖方案的运营模式和市场推广方案进行了分析.%Wireless Mesh Network (WMN) can be a variety of wireless network systems,such as Wireless Local Area Network (WLAN),Wireless Metropolitan Area Network (WMAN),etc. These techniques are combined to improve wireless network performance,and improve network coverage. In this paper,based on the development of network technology in IEEE 802 WMN standard series,a wireless city coverage program is proposed,whose lowest network uses WiFi +wireless Mesh technology,WiMAX networks and WiFi + wireless Mesh technologies. Cities covered by the program and wireless business model and marketing programs are all analyzed.

  6. The methodical substantiation of measures to improve the use of basic production assets of the enterprise

    Directory of Open Access Journals (Sweden)

    Korol Svetlana Anatolevna

    2013-07-01

    Full Text Available The method of calculating the performance measures to improve the use of basic production assets of the enterprise: production cost, production volume, number of additional workers, depreciation and amortization.

  7. Process improvement of knives production in a small scale industry

    Science.gov (United States)

    Ananto, Gamawan; Muktasim, Irfan

    2017-06-01

    dependency upon the operator's skill as well. The main conclusions are: the substitution of laser cut with wire cut machine for the first task (a) could reduce the operation time from 60 to 39.26 minutes with good result of surface quality and the truing process (b) could be omitted; the additional grinding fixture in beveling process (c) is required and two workstations have to be assigned instead of one as in previous condition. They lead to improvements including the guarantee of the uniformity of knifes' angle, the reduction on the operators' skills dependency, the shortening of cycle time from 855 to 420 minutes, and the higher number of productivity from 9 units/month into 20units/month.

  8. Improving The Efficiency Of Ammonia Electrolysis For Hydrogen Production

    Science.gov (United States)

    Palaniappan, Ramasamy

    Given the abundance of ammonia in domestic and industrial wastes, ammonia electrolysis is a promising technology for remediation and distributed power generation in a clean and safe manner. Efficiency has been identified as one of the key issues that require improvement in order for the technology to enter the market phase. Therefore, this research was performed with the aim of improving the efficiency of hydrogen production by finding alternative materials for the cathode and electrolyte. 1. In the presence of ammonia the activity for hydrogen evolution reaction (HER) followed the trend Rh>Pt>Ru>Ni. The addition of ammonia resulted in lower rates for HER for Pt, Ru, and Ni, which have been attributed to competition from the ammonia adsorption reaction. 2. The addition of ammonia offers insight into the role of metal-hydrogen underpotential deposition (M-Hupd) on HER kinetics. In addition to offering competition via ammonia adsorption it resulted in fewer and weaker M-Hupd bonds for all metals. This finding substantiates the theory that M-Hupd bonds favor HER on Pt electrocatalyst. However, for Rh results suggest that M-Hupd bond may hinder the HER. In addition, the presence of unpaired valence shell electrons is suggested to provide higher activity for HER in the presence of ammonia. 3. Bimetals PtxM1-x (M = Ir, Ru, Rh, and Ni) offered lower overpotentials for HER compared to the unalloyed metals in the presence of ammonia. The activity of HER in the presence of ammonia follows the trend Pt-Ir>Pt-Rh>Pt-Ru>Pt-Ni. The higher activity of HER is attributed to the synergistic effect of the alloy, where ammonia adsorbs onto the more electropositive alloying metal leaving Pt available for Hupd formation and HER to take place. Additionally, this supports the theory that the presence of a higher number of unpaired electrons favors the HER in the presence of ammonia. 4. Potassium polyacrylate (PAA-K) was successfully used as a substitute for aqueous KOH for ammonia

  9. Towards Controlling Latency in Wireless Networks

    KAUST Repository

    Bouacida, Nader

    2017-04-24

    Wireless networks are undergoing an unprecedented revolution in the last decade. With the explosion of delay-sensitive applications in the Internet (i.e., online gaming and VoIP), latency becomes a major issue for the development of wireless technology. Taking advantage of the significant decline in memory prices, industrialists equip the network devices with larger buffering capacities to improve the network throughput by limiting packets drops. Over-buffering results in increasing the time that packets spend in the queues and, thus, introducing more latency in networks. This phenomenon is known as “bufferbloat”. While throughput is the dominant performance metric, latency also has a huge impact on user experience not only for real-time applications but also for common applications like web browsing, which is sensitive to latencies in order of hundreds of milliseconds. Concerns have arisen about designing sophisticated queue management schemes to mitigate the effects of such phenomenon. My thesis research aims to solve bufferbloat problem in both traditional half-duplex and cutting-edge full-duplex wireless systems by reducing delay while maximizing wireless links utilization and fairness. Our work shed lights on buffer management algorithms behavior in wireless networks and their ability to reduce latency resulting from excessive queuing delays inside oversized static network buffers without a significant loss in other network metrics. First of all, we address the problem of buffer management in wireless full-duplex networks by using Wireless Queue Management (WQM), which is an active queue management technique for wireless networks. Our solution is based on Relay Full-Duplex MAC (RFD-MAC), an asynchronous media access control protocol designed for relay full-duplexing. Compared to the default case, our solution reduces the end-to-end delay by two orders of magnitude while achieving similar throughput in most of the cases. In the second part of this thesis

  10. Intrusion detection and monitoring for wireless networks.

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Eric D.; Van Randwyk, Jamie A.; Lee, Erik J.; Stephano, Amanda (Indiana University); Tabriz, Parisa (University of Illinois at Urbana-Champaign); Pelon, Kristen (Cedarville University); McCoy, Damon (University of Colorado, Boulder); Lodato, Mark (Lafayette College); Hemingway, Franklin (University of New Mexico); Custer, Ryan P.; Averin, Dimitry (Polytechnic University); Franklin, Jason (Carnegie Mellon University); Kilman, Dominique Marie

    2005-11-01

    Wireless computer networks are increasing exponentially around the world. They are being implemented in both the unlicensed radio frequency (RF) spectrum (IEEE 802.11a/b/g) and the licensed spectrum (e.g., Firetide [1] and Motorola Canopy [2]). Wireless networks operating in the unlicensed spectrum are by far the most popular wireless computer networks in existence. The open (i.e., proprietary) nature of the IEEE 802.11 protocols and the availability of ''free'' RF spectrum have encouraged many producers of enterprise and common off-the-shelf (COTS) computer networking equipment to jump into the wireless arena. Competition between these companies has driven down the price of 802.11 wireless networking equipment and has improved user experiences with such equipment. The end result has been an increased adoption of the equipment by businesses and consumers, the establishment of the Wi-Fi Alliance [3], and widespread use of the Alliance's ''Wi-Fi'' moniker to describe these networks. Consumers use 802.11 equipment at home to reduce the burden of running wires in existing construction, facilitate the sharing of broadband Internet services with roommates or neighbors, and increase their range of ''connectedness''. Private businesses and government entities (at all levels) are deploying wireless networks to reduce wiring costs, increase employee mobility, enable non-employees to access the Internet, and create an added revenue stream to their existing business models (coffee houses, airports, hotels, etc.). Municipalities (Philadelphia; San Francisco; Grand Haven, MI) are deploying wireless networks so they can bring broadband Internet access to places lacking such access; offer limited-speed broadband access to impoverished communities; offer broadband in places, such as marinas and state parks, that are passed over by traditional broadband providers; and provide themselves with higher quality, more

  11. Vitreoscilla hemoglobin gene ( vgb) improves lutein production in Chlorella vulgaris

    Science.gov (United States)

    Ma, Ruijuan; Lin, Xiangzhi

    2014-03-01

    Vitreoscilla hemoglobin is an oxygen-binding protein that promotes oxygen delivery and reduces oxygen consumption under low oxygen conditions to increase the efficiency of cell respiration and metabolism. In this study, we introduced a Vitreoscilla hemoglobin gene ( vgb) into Chlorella vulgaris by Agrobacterium tumefaciens -mediated transformation (ATMT). PCR analysis confirmed that the vgb gene was successfully integrated into the Chlorella vulgaris genome. Analysis of biomass obtained in shake flasks revealed transformant biomass concentrations as high as 3.28 g/L, which was 38.81% higher than that of the wild-type strain. Lutein content of transformants also increased slightly. Further experiments recovered a maximum lutein yield of 2.91 mg/L from the transformants, which was 36.77% higher than that of the wild-type strain. The above results suggest that integrated expression of the vgb gene may improve cell growth and lutein yield in Chlorella vulgaris, with applications to lutein production from Chlorella during fermentation.

  12. Genomics to benefit livestock production: improving animal health

    Directory of Open Access Journals (Sweden)

    Graham Stuart Plastow

    2016-06-01

    Full Text Available ABSTRACT The primary principle underlying the application of genomics is that it has the most value for difficult and expensive to measure traits. These traits will differ between species and probably also between markets. Maintenance of health will be one of the biggest challenges for efficient livestock production in the next few decades. This challenge will only increase in the face of demand for animal protein, resistance to existing drugs, and the pressure to reduce the use of antibiotics in agriculture. There is probably genetic variation in susceptibility for all diseases but little has been done to make use of this variation to date. In part this is because it is very difficult as well as expensive to measure this variation. This suggests that genomics should provide one of the ways of tackling the challenge of improving animal health. This paper will discuss the concepts of resistance, variation in susceptibility, and resilience; provide examples and present some recent results in cattle and pigs; and briefly discuss the application of gene editing in relation to disease resistance.

  13. Improving productivity of Rex, Satin and Reza rabbits through selection

    Directory of Open Access Journals (Sweden)

    Bram Brahmantiyo

    2011-12-01

    Full Text Available Selection based on weaning weight in Rex, Satin rabbits and their crosses was done to improve its productivity. Data from the base population (P0, selected population (G0 and an offspring of selected population (F1 were used to estimate heritability using nested analysis method (nested and best linear unbiased prediction (BLUP. The value of heritability estimated of birth weight, weaning weight, 12 weeks body weight and 16 weeks body weight of Rex were 0.74±0.09, 0.93±0.05, 0.81±0.09 and 0.89±0.06, Satin were 0.96, 0.82±0.22, 0.93±0.40 and 0.97 and Reza were 0.96±0.27, 0.98, 0.86±0.40 dan 0.78, respectively. Increase in weaning weight on selected Rex, Satin rabbits and their corsses were 22.77 g (3.66%, 6.83 g (1.11% and 65.29 g (10.67%.

  14. Chrysanthemum Cutting Productivity and Rooting Ability Are Improved by Grafting

    Directory of Open Access Journals (Sweden)

    Jing Zhang

    2013-01-01

    Full Text Available Chrysanthemum has been commercially propagated by rooting of cuttings, whereas the quality will decline over multiple collections from a single plant. Therefore, we compared the vigour, rooting ability, and some physiological parameters between cuttings harvested from nongrafted “Jinba” (non-grafted cuttings with those collected from grafted “Jinba” plants onto Artemisia scoparia as a rootstock (grafted cuttings. The yield, length, node number, stem diameter, fresh weight, and dry weight of the grafted cuttings were superior to the non-grafted cuttings. Also grafted cuttings “Jinba” rooted 1 day earlier, but showing enhanced rooting quality including number, length, diameter, and dry weight of roots, where compared to the non-grafted. The physiological parameters that indicated contents of soluble protein, peroxidase activity, soluble sugar, and starch, ratios of soluble sugar/nitrogen ratio, and carbohydrate/nitrogen (C/N, as well as contents of indole-3-acetic acid (IAA and abscisic acid (ABA, and IAA/ABA ratio were significantly increased in the grafted cuttings. This suggested their important parts in mediating rooting ability. Results from this study showed that grafting improved productivity and rooting ability related to an altered physiology, which provide a means to meet the increasing demand.

  15. Conceptual design report -- Gasification Product Improvement Facility (GPIF)

    Energy Technology Data Exchange (ETDEWEB)

    Sadowski, R.S.; Skinner, W.H.; House, L.S.; Duck, R.R. [CRS Sirrine Engineers, Inc., Greenville, SC (United States); Lisauskas, R.A.; Dixit, V.J. [Riley Stoker Corp., Worcester, MA (United States); Morgan, M.E.; Johnson, S.A. [PSI Technology Co., Andover, MA (United States). PowerServe Div.; Boni, A.A. [PSI-Environmental Instruments Corp., Andover, MA (United States)

    1994-09-01

    The problems heretofore with coal gasification and IGCC concepts have been their high cost and historical poor performance of fixed-bed gasifiers, particularly on caking coals. The Gasification Product Improvement Facility (GPIF) project is being developed to solve these problems through the development of a novel coal gasification invention which incorporates pyrolysis (carbonization) with gasification (fixed-bed). It employs a pyrolyzer (carbonizer) to avoid sticky coal agglomeration caused in the conventional process of gradually heating coal through the 400 F to 900 F range. In so doing, the coal is rapidly heated sufficiently such that the coal tar exists in gaseous form rather than as a liquid. Gaseous tars are then thermally cracked prior to the completion of the gasification process. During the subsequent endothermic gasification reactions, volatilized alkali can become chemically bound to aluminosilicates in (or added to) the ash. To reduce NH{sub 3} and HCN from fuel born nitrogen, steam injection is minimized, and residual nitrogen compounds are partially chemically reduced in the cracking stage in the upper gasifier region. Assuming testing confirms successful deployment of all these integrated processes, future IGCC applications will be much simplified, require significantly less mechanical components, and will likely achieve the $1,000/kWe commercialized system cost goal of the GPIF project. This report describes the process and its operation, design of the plant and equipment, site requirements, and the cost and schedule. 23 refs., 45 figs., 23 tabs.

  16. Digital Radiography and Computed Tomography (DRCT) Product Improvement Plan (PIP)

    Energy Technology Data Exchange (ETDEWEB)

    Tim Roney; Bob Pink; Karen Wendt; Robert Seifert; Mike Smith

    2010-12-01

    The Idaho National Laboratory (INL) has been developing and deploying x-ray inspection systems for chemical weapons containers for the past 12 years under the direction of the Project Manager for Non-Stockpile Chemical Materiel (PMNSCM). In FY-10 funding was provided to advance the capabilities of these systems through the DRCT (Digital Radiography and Computed Tomography) Product Improvement Plan (PIP), funded by the PMNSCM. The DRCT PIP identified three research tasks; end user study, detector evaluation and DRCT/PINS integration. Work commenced in February, 2010. Due to the late start and the schedule for field inspection of munitions at various sites, it was not possible to spend sufficient field time with operators to develop a complete end user study. We were able to interact with several operators, principally Mr. Mike Rowan who provided substantial useful input through several discussions and development of a set of field notes from the Pueblo, CO field mission. We will be pursuing ongoing interactions with field personnel as opportunities arise in FY-11.

  17. Attached cultivation for improving the biomass productivity of Spirulina platensis.

    Science.gov (United States)

    Zhang, Lanlan; Chen, Lin; Wang, Junfeng; Chen, Yu; Gao, Xin; Zhang, Zhaohui; Liu, Tianzhong

    2015-04-01

    To improve cultivation efficiency for microalgae Spirulina platensis is related to increase its potential use as food source and as an effective alternative for CO2 fixation. The present work attempted to establish a technique, namely attached cultivation, for S. platensis. Laboratory experiments were made firstly to investigate optimal conditions on attached cultivation. The optimal conditions were found: 25 g m(-2) for initial inoculum density using electrostatic flocking cloth as substrata, light intensity lower than 200 μmol m(-2) s(-1), CO2 enriched air flow (0.5%) at a superficial aeration rate of 0.0056 m s(-1) in a NaHCO3-free Zarrouk medium. An outdoor attached cultivation bench-scale bioreactor was built and a 10d culture of S. platensis was carried out with daily harvesting. A high footprint areal biomass productivity of 60 g m(-2) d(-1) was obtained. The nutrition of S. platensis with attached cultivation is identical to that with conventional liquid cultivation. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Wireless rechargeable sensor networks

    CERN Document Server

    Yang, Yuanyuan

    2015-01-01

    This SpringerBrief provides a concise guide to applying wireless energy transfer techniques in traditional battery-powered sensor networks. It examines the benefits and challenges of wireless power including efficiency and reliability. The authors build a wireless rechargeable sensor networks from scratch and aim to provide perpetual network operation. Chapters cover a wide range of topics from the collection of energy information and recharge scheduling to joint design with typical sensing applications such as data gathering. Problems are approached using a natural combination of probability

  19. Wireless network pricing

    CERN Document Server

    Huang, Jianwei

    2013-01-01

    Today's wireless communications and networking practices are tightly coupled with economic considerations, to the extent that it is almost impossible to make a sound technology choice without understanding the corresponding economic implications. This book aims at providing a foundational introduction on how microeconomics, and pricing theory in particular, can help us to understand and build better wireless networks. The book can be used as lecture notes for a course in the field of network economics, or a reference book for wireless engineers and applied economists to understand how pricing

  20. Architecture of Wireless Network

    Directory of Open Access Journals (Sweden)

    Ram Kumar Singh

    2012-03-01

    Full Text Available To allow for wireless communications among a specific geographic area, an base stations of communication network must be deployed to allow sufficient radio coverage to every mobile users. The base stations, successively, must be linked to a central hub called the MSC (mobile switching centre. The mobile switching centre allow connectivity among the PSTN (public switched telephone network and the numerous wireless base stations, and finally among entirely of the wireless subscribers in a system. The global telecommunications control grid of PSTN which associate with conventional (landline telephone switching centre (called central office with MSCs all around the world.

  1. Wireless mesh networks

    CERN Document Server

    Held, Gilbert

    2005-01-01

    Wireless mesh networking is a new technology that has the potential to revolutionize how we access the Internet and communicate with co-workers and friends. Wireless Mesh Networks examines the concept and explores its advantages over existing technologies. This book explores existing and future applications, and examines how some of the networking protocols operate.The text offers a detailed analysis of the significant problems affecting wireless mesh networking, including network scale issues, security, and radio frequency interference, and suggests actual and potential solutions for each pro

  2. WIRELESS SENSOR NETWORKS IN AGRICULTURE: FOR POTATO FARMING

    Directory of Open Access Journals (Sweden)

    KSHITIJ SHINGHAL,

    2010-08-01

    Full Text Available The newly emerged wireless sensor network (WSN technology has spread rapidly into various multidisciplinary fields. Agriculture and farming is one of the industries which have recently diverted their attention to WSN, seeking this cost effective technology to improve its production and enhance agriculture yield standard. This paper reports on the application of WSN technology to improve potato crop production. By monitoring and understanding individual crop and its requirements, farmers can potentially identify the various fertilizers, irrigation and other requirements. The sensor node, which is small in size and low in power consumption, shows significant potential in this context. In this paper an irrigation management model is given to estimate agricultural parameters using mathematical calculations with specific example of potato crop. Using WSN agricultural parameters like depth of water, soil water tension and system capacity etc. are estimated for irrigation management system to maintain optimum SWT for better crop yield and increase the application efficiency of irrigation system by 10%.

  3. Improvement of meat production capacity in reindeer farming

    Directory of Open Access Journals (Sweden)

    C. J. Petersson

    1990-09-01

    Full Text Available The poster describes the main activities in a joint Swedish-Norwegian research project. The ultimate purpose is to develope tools for individual production control and flock management in domestic reindeer production.

  4. Improved Pig Production and Performance in the Tropics | Enem ...

    African Journals Online (AJOL)

    The consumption of white rather than red meat is being advocated ... The constraints to pig production in Nigeria are mainly based on social and religious beliefs. ... housing, feeding, health, and product marketing were discussed to enable a ...

  5. Microparticulated whey proteins for improving dairy product texture

    DEFF Research Database (Denmark)

    Ipsen, Richard

    2017-01-01

    . For fermented dairy products, fine-tuning of the interaction potential of MWP is of major importance. For products where MWP serves as an inert filler (e.g., cheese, ice cream), initial processing should ensure that MWP will not interact with the product matrix ensuring creaminess and desired structural...

  6. Wireless power transfer via radiowaves

    CERN Document Server

    Shinohara , Naoki

    2014-01-01

    Recent advances in Wireless Power Transmission (WPT) technologies have enabled various engineering applications with potential product implementation. WPT can be utilized to charge batteries in various pieces of equipment without the need for a wired connection. Energy can be harvested from ambient RF and microwave radiation and 1 million kW microwaves can be transmitted from space to the ground.This book covers all the theory and technologies of WPT, such as microwave generators with semi-conductors and microwave tubes, antennas, phased arrays, beam efficiency, and rectifiers (rectenna). The

  7. Communication techniques and challenges for wireless food quality monitoring.

    Science.gov (United States)

    Jedermann, Reiner; Pötsch, Thomas; Lloyd, Chanaka

    2014-06-13

    Remote measurement of product core temperature is an important prerequisite to improve the cool chain of food products and reduce losses. This paper examines and shows possible solutions to technical challenges that still hinder practical applications of wireless sensor networks in the field of food transport supervision. The high signal attenuation by water-containing products limits the communication range to less than 0.5 m for the commonly used 2.4 GHz radio chips. By theoretical analysis of the dependency of signal attenuation on the operating frequency, we show that the signal attenuation can be largely reduced by the use of 433 MHz or 866 MHz devices, but forwarding of messages over multiple hops inside a sensor network is mostly unavoidable to guarantee full coverage of a packed container. Communication protocols have to provide compatibility with widely accepted standards for integration into the global Internet, which has been achieved by programming an implementation of the constrained application protocol for wireless sensor nodes and integrating into IPv6-based networks. The sensor's battery lifetime can be extended by optimizing communication protocols and by in-network pre-processing of the sensor data. The feasibility of remote freight supervision was demonstrated by our full-scale 'Intelligent Container' prototype.

  8. Communication techniques and challenges for wireless food quality monitoring

    Science.gov (United States)

    Jedermann, Reiner; Pötsch, Thomas; Lloyd, Chanaka

    2014-01-01

    Remote measurement of product core temperature is an important prerequisite to improve the cool chain of food products and reduce losses. This paper examines and shows possible solutions to technical challenges that still hinder practical applications of wireless sensor networks in the field of food transport supervision. The high signal attenuation by water-containing products limits the communication range to less than 0.5 m for the commonly used 2.4 GHz radio chips. By theoretical analysis of the dependency of signal attenuation on the operating frequency, we show that the signal attenuation can be largely reduced by the use of 433 MHz or 866 MHz devices, but forwarding of messages over multiple hops inside a sensor network is mostly unavoidable to guarantee full coverage of a packed container. Communication protocols have to provide compatibility with widely accepted standards for integration into the global Internet, which has been achieved by programming an implementation of the constrained application protocol for wireless sensor nodes and integrating into IPv6-based networks. The sensor's battery lifetime can be extended by optimizing communication protocols and by in-network pre-processing of the sensor data. The feasibility of remote freight supervision was demonstrated by our full-scale ‘Intelligent Container’ prototype. PMID:24797133

  9. Sensors, motes, and smart dust : WirelessHART sensors are finding application in gas plants, well rigs and soon may be embraced by entire cities

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, G.

    2009-05-15

    The WirelessHART (Highway Addressable Remote Transducer) is wireless communication system designed to address the needs of the process industry. The sensor system can be used in applications that were previously not practical or possible, such as in drilling rigs and gas plants. The wireless aspect is an important new innovation that delivers key economic benefits. For some temperature measurements in industrial plants, it is not always feasible to run wires all the way up the stack. The wireless solution consists of wireless gateways and field devices that receive and condition data from sensors that measure temperatures, pressures, flow rates, vibration, and other process parameters. The same devices also relay the measurement data to the gateway. Up to 100 devices can be linked wirelessly to a gateway, which passes on the process information to the control system of the plant, drilling rig, or other industrial facility. Multiple networks can be bridged using Wi-Fi. Once deployed, the technology optimizes itself. The system is also useful for determining temperatures and pressures on the mud tanks at drilling rigs and blowout preventers. The system is being used in highly automated and multi-process plants like refineries and upgraders where numerous sensors are needed. Savings on the wireless installations allow a company to afford the installation of more sensors in places they previously could not cost-effectively deploy wired sensors, thereby resulting in improved productivity, safety, and reduced plant downtimes. Talisman Energy's Teepee Creek sour gas plant near Grande Prairie Alberta uses the WirelessHART network to measure temperatures, pressure, differential pressure, tank levels, and valve positions. 4 figs.

  10. A Consistent Design Methodology for Wireless Embedded Systems

    Directory of Open Access Journals (Sweden)

    Sauzon G

    2005-01-01

    Full Text Available Complexity demand of modern communication systems, particularly in the wireless domain, grows at an astounding rate, a rate so high that the available complexity and even worse the design productivity required to convert algorithms into silicon are left far behind. This effect is commonly referred to as the design productivity crisis or simply the design gap. Since the design gap is predicted to widen every year, it is of utmost importance to look closer at the design flow of such communication systems in order to find improvements. While various ideas for speeding up designs have been proposed, very few have found their path into existing EDA products. This paper presents requirements for such tools and shows how an open design environment offers a solution to integrate existing EDA tools, allowing for a consistent design flow, considerably speeding up design times.

  11. Matching of Energy Provisions in Multihop Wireless Infra-Structures

    Directory of Open Access Journals (Sweden)

    Rui Teng

    2016-01-01

    Full Text Available Recently there have been large advances in energy technologies for battery-operated systems, including green energy resources and high capacity batteries. The effective use of battery energy resources in wireless infrastructure networks to improve the versatility and reliability of wireless communications is an important issue. Emerging applications of smart cities, Internet of Things (IoT, and emergency responses highly rely on the basic communication network infrastructures that enable ubiquitous network connections. However, energy consumption by nodes in a wireless infrastructure network depends on the transmissions of other nodes in the network. Considering this inter-dependence is necessary to achieve efficient provision of energy in wireless networks. This paper studies the issue of energy provision for wireless relay nodes in Wireless Multihop Infrastructures (WMI assuming constraints on the total energy provision. We introduce a scheme of Energy Provision Matching (Matching-EP for WMI which optimizes energy provision based on matching of energy provision with estimates of differentiated position-dependent energy consumption by wireless nodes distributed in the network. The evaluation results show that Matching-EP with 4%–34% improvement in energy matching degree enables 10%–40% improvement of the network lifetime, and 5%–40% improvement of packet delivery compared with conventional WMI networks.

  12. Dependable Embedded Wireless Infrastructure

    OpenAIRE

    Pereira, Nuno

    2015-01-01

    DEWI will provide key solutions for wireless seamless connectivity and interoperability in the everyday physical environment of citizens, thereby significantly contributing to the emerging smart home and smart public space.

  13. Green heterogeneous wireless networks

    CERN Document Server

    Ismail, Muhammad; Nee, Hans-Peter; Qaraqe, Khalid A; Serpedin, Erchin

    2016-01-01

    This book focuses on the emerging research topic "green (energy efficient) wireless networks" which has drawn huge attention recently from both academia and industry. This topic is highly motivated due to important environmental, financial, and quality-of-experience (QoE) considerations. Specifically, the high energy consumption of the wireless networks manifests in approximately 2% of all CO2 emissions worldwide. This book presents the authors’ visions and solutions for deployment of energy efficient (green) heterogeneous wireless communication networks. The book consists of three major parts. The first part provides an introduction to the "green networks" concept, the second part targets the green multi-homing resource allocation problem, and the third chapter presents a novel deployment of device-to-device (D2D) communications and its successful integration in Heterogeneous Networks (HetNets). The book is novel in that it specifically targets green networking in a heterogeneous wireless medium, which re...

  14. Production of Lupinus angustifolius protein hydrolysates with improved functional properties

    Directory of Open Access Journals (Sweden)

    Millán, Francisco

    2005-06-01

    Full Text Available Protein hydrolysates wer e obtained from lupin flour and from the purified globulin α -conglutin, and their functional properties were studied. Hydrolysis with alcalase for 60 minutes yielded degrees of hydrolysis ranging from 4 % to 11 % for lupin flour, and from 4 % to 13% for α -conglutin. Protein solubility, oil absorption, foam capacity and stability, emulsifying activity, and emulsion stability of hydrolysates with 6% degree of hydrolysis were determined and compared with the properties of the original flour. The protein hydrolysates showed better functional properties than the original proteins. Most importantly, the solubility of the α -conglutin and L. angustifolius flour hydrolysates was increased by 43 % and 52 %, respectively. Thus, lupin seed protein hydrolysates have improved functional properties and could be used in the elaboration of a variety of products such as breads, cakes, and salad dressings.Se obtuvieron hidrolizados proteicos de la harina del altramuz y de la globulina α - conglutina purificada y se estudiaron sus propiedades funcionales. La hidrólisis con alcalasa durante 60 minutos produjo hidrolizados con grados de hidrólisis entre el 4 % y el 11 % para la harina y entre el 4 % y el 13 % para la α - conglutina. Se estudió en un hidrolizado con un 6 % de grado de hidrólisis la solubilidad proteica, absorción de aceite, capacidad y estabilidad espumante y actividad y estabilidad emulsificante. Los hidrolizados proteicos mostraron mejores propiedades funcionales que las proteínas originales. Más aún, la solubilidad de los hidrolizados de α - conglutina y la harina se incrementó en un 43 % y 52 % respectivamente. Así pues, hidrolizados de proteínas de semilla de lupino presentan mejores propiedades funcionales y podrían usarse en la elaboración de productos como pan, dulces, salsas o cremas.

  15. Constructing Product Ontologies with an Improved Conceptual Clustering Algorithm

    Institute of Scientific and Technical Information of China (English)

    曹大军; 徐良贤

    2002-01-01

    In a distributed eMarketplace, recommended product ontologies are required for trading between buyers and sellers. Conceptual clustering can be employed to build dynamic recommended product ontologies. Traditional methods of conceptual clustering (e. g. COBWEB or Cluster/2) do not take heterogeneous attributes of a concept into account.Moreover, the result of these methods is clusters other than recommended concepts. A center recommendation clustering algorithm is provided. According to the values of heterogeneous attributes, recommended product names can be selected at the clusters, which are produced by this algorithm. This algorithm can also create the hierarchical relations between product names. The definitions of product names given by all participants are collected in a distributed eMarketplace.Recommended product ontologies are built. These ontologies include relations and definitions of product names, which come from different participants in the distributed eMarketplace. Finally a case is given to illustrate this method. The result shows that this method is feasible.

  16. Energy and bandwidth-efficient wireless transmission

    CERN Document Server

    Gao, Wei

    2017-01-01

    This book introduces key modulation and predistortion techniques for approaching energy and spectrum-efficient transmission for wireless communication systems. The book presents a combination of theoretical principles, practical implementations, and actual tests. It focuses on spectrum-efficient modulation and energy-efficient transmission techniques in the portable wireless communication systems, and introduces currently developed and designed RF transceivers in the latest wireless markets. Most materials, design examples, and design strategies used are based on the author’s two decades of work in the digital communication fields, especially in the areas of the digital modulations, demodulations, digital signal processing, and linearization of power amplifiers. The applications of these practical products and equipment cover the satellite communications on earth station systems, microwave communication systems, 2G GSM and 3G WCDMA mobile communication systems, and 802.11 WLAN systems.

  17. Wireless radio a history

    CERN Document Server

    Coe, Lewis

    2006-01-01

    ""Informative...recommended""--Choice; ""interesting...a good read...well worth reading""--Contact Magazine. This history first looks at Marconi's wireless communications system and then explores its many applications, including marine radio, cellular telephones, police and military uses, television and radar. Radio collecting is also discussed, and brief biographies are provided for the major figures in the development and use of the wireless.

  18. Wireless power transfer system

    OpenAIRE

    Arai, Hiroyuki

    2012-01-01

    This paper presents a survey of recent wireless power transfer systems. The issue of wireless power transfer is to achieve a highly efficient system with small positioning errors of the facilities setting. Several theories have been presented to obtain precise system design. This paper presents a summary of design theory for short range power transfer systems and detailed formulations based on a circuit model and an array of infinitesimal dipoles. In addition to these theories, this paper in...

  19. Wireless Computing Architecture III

    Science.gov (United States)

    2013-09-01

    Strider: automatic rate adaptation and collision handling. In ACM SIGCOMM 2011. [7] K . Lin el al. Random access heterogeneous MIMO networks. In ACM...Noncooperative cellular wireless with unlimited numbers of base station antennas. IEEE Trans. Wireless Commun., 9(11):3590–3600, 2010. [10] K . Tan el al...communication. Cambridge Univ Pr, 2005. [12] J. Van de Beek, O. Edfors , M. Sandell, S. Wilson, and P. Borjesson. On channel estimation in OFDM systems

  20. Wireless IP Telephony

    CERN Document Server

    Gerami, Mohsen

    2010-01-01

    The convergence of traditional telecommunications and the Internet is creating new network-based service delivery opportunities for telecommunications companies carriers, service providers, and network equipment providers. Voice over Wireless IP is one of the most exciting new developments emerging within the telephony market. It is set to revolutionize the delivery of mobile voice Services and provide exciting new opportunities for operators and service providers alike. This survey discusses principal of Wireless IP Telephony.

  1. Bluetooth wireless database for scoliosis clinics.

    Science.gov (United States)

    Lou, E; Fedorak, M V; Hill, D L; Raso, J V; Moreau, M J; Mahood, J K

    2003-05-01

    A database system with Bluetooth wireless connectivity has been developed so that scoliosis clinics can be run more efficiently and data can be mined for research studies without significant increases in equipment cost. The wireless database system consists of a Bluetooth-enabled laptop or PC and a Bluetooth-enabled handheld personal data assistant (PDA). Each patient has a profile in the database, which has all of his or her clinical history. Immediately prior to the examination, the orthopaedic surgeon selects a patient's profile from the database and uploads that data to the PDA over a Bluetooth wireless connection. The surgeon can view the entire clinical history of the patient while in the examination room and, at the same time, enter in any new measurements and comments from the current examination. After seeing the patient, the surgeon synchronises the newly entered information with the database wirelessly and prints a record for the chart. This combination of the database and the PDA both improves efficiency and accuracy and can save significant time, as there is less duplication of work, and no dictation is required. The equipment required to implement this solution is a Bluetooth-enabled PDA and a Bluetooth wireless transceiver for the PC or laptop.

  2. Development of a Testbed for Wireless Underground Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mehmet C. Vuran

    2010-01-01

    Full Text Available Wireless Underground Sensor Networks (WUSNs constitute one of the promising application areas of the recently developed wireless sensor networking techniques. WUSN is a specialized kind of Wireless Sensor Network (WSN that mainly focuses on the use of sensors that communicate through soil. Recent models for the wireless underground communication channel are proposed but few field experiments were realized to verify the accuracy of the models. The realization of field WUSN experiments proved to be extremely complex and time-consuming in comparison with the traditional wireless environment. To the best of our knowledge, this is the first work that proposes guidelines for the development of an outdoor WUSN testbed with the goals of improving the accuracy and reducing of time for WUSN experiments. Although the work mainly aims WUSNs, many of the presented practices can also be applied to generic WSN testbeds.

  3. ZigBee-based wireless intra-oral control system for quadriplegic patients.

    Science.gov (United States)

    Peng, Qiyu; Budinger, Thomas F

    2007-01-01

    A human-to-computer system that includes a wireless intra-oral module, a wireless coordinator and distributed wireless controllers, is presented. The state-of-the-art ZigBee protocol is employed to achieve reliable, low-power and cost-efficient wireless communication between the tongue, computer and controllers. By manipulating five buttons on the wireless intra-oral module using the tongue, the subject can control cursors, computer menus, wheelchair, lights, TV, phone and robotic devices. The system is designed to improve the life quality of patients with stroke and patients with spinal cord injury.

  4. Feedback-based Intra Refresh Scheme for Wireless Video Transmission

    Institute of Scientific and Technical Information of China (English)

    FENGXiubo; XIEJianying

    2004-01-01

    This paper investigates the intra refresh techniques for video transmission in wireless scenario. Twostate Markov model is proposed to simulate the fading wireless channel. Taking feedback information into account, we analyze the channel distortion due to the burst errors. An improved intra refresh scheme is then proposed for optimal selection of coding mode for each Macroblock (MB) in rate-distortion framework. The propo sedscheme can stop error propagation and reduce channel distortion effectively. Simulations using TMN10 show that our scheme obtains improved performance with respect to error resilience for wireless video communication.

  5. Investigation of interference in multiple-input multiple-output wireless transmission at W band for an optical wireless integration system.

    Science.gov (United States)

    Li, Xinying; Yu, Jianjun; Dong, Ze; Zhang, Junwen; Chi, Nan; Yu, Jianguo

    2013-03-01

    We experimentally investigate the interference in multiple-input multiple-output (MIMO) wireless transmission by adjusting the relative locations of horn antennas (HAs) in a 100 GHz optical wireless integration system, which can deliver a 50 Gb/s polarization-division-multiplexing quadrature-phase-shift-keying signal over 80 km single-mode fiber-28 and a 2×2 MIMO wireless link. For the parallel 2×2 MIMO wireless link, each receiver HA can only get wireless power from the corresponding transmitter HA, while for the crossover ones, the receiver HA can get wireless power from two transmitter HAs. At the wireless receiver, polarization demultiplexing is realized by the constant modulus algorithm (CMA) in the digital-signal-processing part. Compared to the parallel case, wireless interference causes about 2 dB optical signal-to-noise ratio penalty at a bit-error ratio (BER) of 3.8×10(-3) for the crossover cases if similar CMA taps are employed. The increase in CMA tap length can reduce wireless interference and improve BER performance. Furthermore, more CMA taps should be adopted to overcome the severe wireless interference when two pairs of transmitter and receiver HAs have different wireless distances.

  6. Adaptive rate control on wireless transcoder

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    To guarantee the real-time transmission of a video stream,based on the stochastic optimal control method,a frame layer adaptive rate control algorithm for the wireless transcoder is proposed,which is capable of dynamically determining the transcoder's objective bit rate,according to the bandwidth variation of the wireless channel and the bufier occupancy. Then the transient performance,steady performance,and computational complexity of the algorithm are analyzed.Finally,the experiment results demonstrate that the algorithm can improve the synthetic performance of rate control through the compromise between the end-to-end delay and the playout quality.

  7. Service discovery in heterogeneous wireless networks

    NARCIS (Netherlands)

    Blangé, M.J.; Karkowski, I.P.; Vermeulen, B.C.B.

    2005-01-01

    In this paper we describe a possible solution to the problem of service discovery in heterogeneous wireless networks. This solution involves introduction of a network independent service discovery layer, with as main goal the improved robustness of applications running on top of it. A possible imple

  8. Distributed Algorithms in Wireless Sensor Networks

    NARCIS (Netherlands)

    Nieberg, Tim; Broersma, Hajo; Faigle, Ulrich; Hurink, Johann; Pickl, Stefan; Woeginger, Gerhard

    2003-01-01

    Wireless sensor networks (WSNs) are an emerging field of research which combines many challenges in distributed computing and network optimization. One important goal is to improve the functional lifetime of the sensor network using energy-efficient distributed algorithms, networking and routing tec

  9. Censored cooperative positioning for dense wireless networks

    NARCIS (Netherlands)

    Das, Kallol; Wymeersch, Henk

    Cooperative positioning is an emerging topic in wireless sensor networks and navigation. It can improve the positioning accuracy and coverage in GPS-challenged conditions such as inside tunnels, in urban canyons, and indoors. Different algorithms have been proposed relying on iteratively exchanging

  10. Clock Synchronization for Multihop Wireless Sensor Networks

    Science.gov (United States)

    Solis Robles, Roberto

    2009-01-01

    In wireless sensor networks, more so generally than in other types of distributed systems, clock synchronization is crucial since by having this service available, several applications such as media access protocols, object tracking, or data fusion, would improve their performance. In this dissertation, we propose a set of algorithms to achieve…

  11. Wireless Networks: New Meaning to Ubiquitous Computing.

    Science.gov (United States)

    Drew, Wilfred, Jr.

    2003-01-01

    Discusses the use of wireless technology in academic libraries. Topics include wireless networks; standards (IEEE 802.11); wired versus wireless; why libraries implement wireless technology; wireless local area networks (WLANs); WLAN security; examples of wireless use at Indiana State University and Morrisville College (New York); and useful…

  12. New Wireless Sensors for Diagnostics Under Harsh Environments Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High-temperature passive wireless surface acoustic wave (SAW) sensors are highly desirable for improving safety and efficiency in aviation and space vehicles. This...

  13. Wireless tuning fork gyroscope for biomedical applications

    Science.gov (United States)

    Abraham, Jose K.; Varadan, Vijay K.; Whitchurch, Ashwin K.; Sarukesi, K.

    2003-07-01

    This paper presents the development of a Bluetooth enabled wireless tuning fork gyroscope for the biomedical applications, including gait phase detection system, human motion analysis and physical therapy. This gyroscope is capable of measuring rotation rates between -90 and 90 and it can read the rotation information using a computer. Currently, the information from a gyroscope can trigger automobile airbag deployment during rollover, improve the accuracy and reliability of GPS navigation systems and stabilize moving platforms such as automobiles, airplanes, robots, antennas, and industrial equipment. Adding wireless capability to the existing gyroscope could help to expand its applications in many areas particularly in biomedical applications, where a continuous patient monitoring is quite difficult. This wireless system provides information on several aspects of activities of patients for real-time monitoring in hospitals.

  14. Intelligent Wireless Communication System Using Cognitive Radio

    Directory of Open Access Journals (Sweden)

    Asma Amraoui

    2012-04-01

    Full Text Available The increasing demand for wireless communication introduces efficient spectrum utilization challenge. To address this challenge, cognitive radio (CR is emerged as the key technology; which enables opportunistic access to the spectrum. CR is a form of wireless communication in which a transceiver can intelligently detect which communication channels are in use and which are not, and instantly move into vacant channels while avoiding occupied ones. This optimizes the use of available radio-frequency (RFspectrum while minimizing interference to other users. In this paper, we present a state of the art onthe use of Multi Agent Systems (MAS for spectrum access using cooperation and competition to solve the problem of spectrum allocation and ensure better management. Then we propose a new approach which uses the CR for improving wireless communication for a single cognitive radio mobile terminal (CRMT.

  15. Load balancing in integrated optical wireless networks

    DEFF Research Database (Denmark)

    Yan, Ying; Dittmann, Lars; Wong, S-W.;

    2010-01-01

    In this paper, we tackle the load balancing problem in Integrated Optical Wireless Networks, where cell breathing technique is used to solve congestion by changing the coverage area of a fully loaded cell tower. Our objective is to design a load balancing mechanism which works closely with the in......In this paper, we tackle the load balancing problem in Integrated Optical Wireless Networks, where cell breathing technique is used to solve congestion by changing the coverage area of a fully loaded cell tower. Our objective is to design a load balancing mechanism which works closely...... issues are outlined and a cost function based optimization model is developed for power management. In particularly, two alternative feedback schemes are proposed to report wireless network status. Simulation results show that our proposed load balancing mechanism improves network performances....

  16. Robust resource allocation in future wireless networks

    CERN Document Server

    Parsaeefard, Saeedeh; Mokari, Nader

    2017-01-01

    This book presents state-of-the-art research on robust resource allocation in current and future wireless networks. The authors describe the nominal resource allocation problems in wireless networks and explain why introducing robustness in such networks is desirable. Then, depending on the objectives of the problem, namely maximizing the social utility or the per-user utility, cooperative or competitive approaches are explained and their corresponding robust problems are considered in detail. For each approach, the costs and benefits of robust schemes are discussed and the algorithms for reducing their costs and improving their benefits are presented. Considering the fact that such problems are inherently non-convex and intractable, a taxonomy of different relaxation techniques is presented, and applications of such techniques are shown via several examples throughout the book. Finally, the authors argue that resource allocation continues to be an important issue in future wireless networks, and propose spec...

  17. 47 CFR Appendix B to Part 1 - Nationwide Programmatic Agreement for the Collocation of Wireless Antennas

    Science.gov (United States)

    2010-10-01

    ... improved coordination of Section 106 compliance regarding wireless communications projects affecting... out. I. Definitions For purposes of this Nationwide Programmatic Agreement, the following definitions...

  18. An improved DS acoustic-seismic modality fusion algorithm based on a new cascaded fuzzy classifier for ground-moving targets classification in wireless sensor networks

    Science.gov (United States)

    Pan, Qiang; Wei, Jianming; Cao, Hongbing; Li, Na; Liu, Haitao

    2007-04-01

    A new cascaded fuzzy classifier (CFC) is proposed to implement ground-moving targets classification tasks locally at sensor nodes in wireless sensor networks (WSN). The CFC is composed of three and two binary fuzzy classifiers (BFC) respectively in seismic and acoustic signal channel in order to classify person, Light-wheeled (LW) Vehicle, and Heavywheeled (HW) Vehicle in presence of environmental background noise. Base on the CFC, a new basic belief assignment (bba) function is defined for each component BFC to give out a piece of evidence instead of a hard decision label. An evidence generator is used to synthesize available evidences from BFCs into channel evidences and channel evidences are further temporal-fused. Finally, acoustic-seismic modality fusion using Dempster-Shafer method is performed. Our implementation gives significantly better performance than the implementation with majority-voting fusion method through leave-one-out experiments.

  19. Bioinspired Surface Treatments for Improved Decontamination: Commercial Products

    Science.gov (United States)

    2017-07-28

    surface. The safety data sheet for the product declares the content to be petroleum lubricating oils (C15 to C30) and ethylene glycol methyl ether...damage leading to restoration of the finish. The safety data sheet lists carnauba wax and ethylene glycol as components. This product was selected... products increased wetting angles for water and ethylene glycol with an associated reduction in geometric surface energy. The coatings did not yield

  20. Wireless avionics for space applications of fundamental physics

    Science.gov (United States)

    Wang, Linna; Zeng, Guiming

    2016-07-01

    Fundamental physics (FP) research in space relies on a strong support of spacecraft. New types of spacecraft including reusable launch vehicles, reentry space vehicles, long-term on-orbit spacecraft or other new type of spacecraft will pave the way for FP missions. In order to test FP theories in space, flight conditions have to be controlled to a very high precision, data collection and handling abilities have to be improved, real-time and reliable communications in critical environments are needed. These challenge the existing avionics of spacecraft. Avionics consists of guidance, navigation & control, TT&C, the vehicle management, etc. Wireless avionics is one of the enabling technologies to address the challenges. Reasons are expatiated of why it is of great advantage. This paper analyses the demands for wireless avionics by reviewing the FP missions and on-board wireless systems worldwide. Main types of wireless communication are presented. Preliminary system structure of wireless avionics are given. The characteristics of wireless network protocols and wireless sensors are introduced. Key technologies and design considerations for wireless avionics in space applications are discussed.

  1. Virtual Manufacturing : Tools for improving Design and Production

    CERN Document Server

    Dépincé, Philippe; Woelk, Peer-Oliver

    2007-01-01

    The research area "Virtual Manufacturing" can be defined as an integrated manufacturing environment which can enhance one or several levels of decision and control in manufacturing process. Several domains can be addressed: Product and Process Design, Process and Production Planning, Machine Tool, Robot and Manufacturing System. As automation technologies such as CAD/CAM have substantially shortened the time required to design products, Virtual Manufacturing will have a similar effect on the manufacturing phase thanks to the modelling, simulation and optimisation of the product and the processes involved in its fabrication.

  2. An Improved Approach for RSSI-Based only Calibration-Free Real-Time Indoor Localization on IEEE 802.11 and 802.15.4 Wireless Networks

    Directory of Open Access Journals (Sweden)

    Marco Passafiume

    2017-03-01

    Full Text Available Assuming a reliable and responsive spatial contextualization service is a must-have in IEEE 802.11 and 802.15.4 wireless networks, a suitable approach consists of the implementation of localization capabilities, as an additional application layer to the communication protocol stack. Considering the applicative scenario where satellite-based positioning applications are denied, such as indoor environments, and excluding data packet arrivals time measurements due to lack of time resolution, received signal strength indicator (RSSI measurements, obtained according to IEEE 802.11 and 802.15.4 data access technologies, are the unique data sources suitable for indoor geo-referencing using COTS devices. In the existing literature, many RSSI based localization systems are introduced and experimentally validated, nevertheless they require periodic calibrations and significant information fusion from different sensors that dramatically decrease overall systems reliability and their effective availability. This motivates the work presented in this paper, which introduces an approach for an RSSI-based calibration-free and real-time indoor localization. While switched-beam array-based hardware (compliant with IEEE 802.15.4 router functionality has already been presented by the author, the focus of this paper is the creation of an algorithmic layer for use with the pre-existing hardware capable to enable full localization and data contextualization over a standard 802.15.4 wireless sensor network using only RSSI information without the need of lengthy offline calibration phase. System validation reports the localization results in a typical indoor site, where the system has shown high accuracy, leading to a sub-metrical overall mean error and an almost 100% site coverage within 1 m localization error.

  3. An Improved Approach for RSSI-Based only Calibration-Free Real-Time Indoor Localization on IEEE 802.11 and 802.15.4 Wireless Networks.

    Science.gov (United States)

    Passafiume, Marco; Maddio, Stefano; Cidronali, Alessandro

    2017-03-29

    Assuming a reliable and responsive spatial contextualization service is a must-have in IEEE 802.11 and 802.15.4 wireless networks, a suitable approach consists of the implementation of localization capabilities, as an additional application layer to the communication protocol stack. Considering the applicative scenario where satellite-based positioning applications are denied, such as indoor environments, and excluding data packet arrivals time measurements due to lack of time resolution, received signal strength indicator (RSSI) measurements, obtained according to IEEE 802.11 and 802.15.4 data access technologies, are the unique data sources suitable for indoor geo-referencing using COTS devices. In the existing literature, many RSSI based localization systems are introduced and experimentally validated, nevertheless they require periodic calibrations and significant information fusion from different sensors that dramatically decrease overall systems reliability and their effective availability. This motivates the work presented in this paper, which introduces an approach for an RSSI-based calibration-free and real-time indoor localization. While switched-beam array-based hardware (compliant with IEEE 802.15.4 router functionality) has already been presented by the author, the focus of this paper is the creation of an algorithmic layer for use with the pre-existing hardware capable to enable full localization and data contextualization over a standard 802.15.4 wireless sensor network using only RSSI information without the need of lengthy offline calibration phase. System validation reports the localization results in a typical indoor site, where the system has shown high accuracy, leading to a sub-metrical overall mean error and an almost 100% site coverage within 1 m localization error.

  4. 78 FR 49529 - Radio Frequency Wireless Technology in Medical Devices; Guidance for Industry and Food and Drug...

    Science.gov (United States)

    2013-08-14

    ... of RF energy, and the RF wireless emissions from one product or device could potentially affect the... HUMAN SERVICES Food and Drug Administration (formerly Docket No. 2006D-0504) Radio Frequency Wireless...) is announcing the availability of the guidance entitled ``Radio Frequency Wireless Technology in...

  5. Improving Knowledge for Green Textile Products: Life Cycle Analysis

    Science.gov (United States)

    Nam, Jinhee

    2012-01-01

    Textile products are used heavily every day. The apparel industry is one of the largest industrial polluters, causing damage to both human health and the environment. Despite increasing consumer concern about environmental issues and a growing trend toward supporting sustainable production, consumers are often unable to evaluate accurately which…

  6. Improving Knowledge for Green Textile Products: Life Cycle Analysis

    Science.gov (United States)

    Nam, Jinhee

    2012-01-01

    Textile products are used heavily every day. The apparel industry is one of the largest industrial polluters, causing damage to both human health and the environment. Despite increasing consumer concern about environmental issues and a growing trend toward supporting sustainable production, consumers are often unable to evaluate accurately which…

  7. Improving Product Quality and Reliability with Customer Experience Data

    NARCIS (Netherlands)

    Brombacher, Aarnout; Hopma, Eva; Ittoo, Ashwin; Lu, Yuan; Luyk, Ilse; Maruster, Laura; Ribeiro, Joel; Weijters, Ton; Wortmann, Hans

    2012-01-01

    Advance technology development and wide use of the World Wide Web have made it possible for new product development organizations to access multi-sources of data-related customer complaints. However, the number of customer plaints of highly innovative consumer electronic products is still increasing

  8. Improving Product Quality and Reliability with Customer Experience Data

    NARCIS (Netherlands)

    Brombacher, Aarnout; Hopma, Eva; Ittoo, Ashwin; Lu, Yuan; Luyk, Ilse; Maruster, Laura; Ribeiro, Joel; Weijters, Ton; Wortmann, Hans

    2012-01-01

    Advance technology development and wide use of the World Wide Web have made it possible for new product development organizations to access multi-sources of data-related customer complaints. However, the number of customer plaints of highly innovative consumer electronic products is still

  9. Cambridge journals blog: Improving feed efficiency in dairy production

    Science.gov (United States)

    Because the cost of feeding animals is one of the greatest expenses in dairy production (40-60% of production costs), research focused on ways to identify and select for animals that are the most efficient at converting feed into milk has greatly expanded during the last decade. The animal Article o...

  10. Improving occupational safety and health by integration into product development

    DEFF Research Database (Denmark)

    Broberg, Ole

    1996-01-01

    A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety and h...

  11. 对一种无线Web服务密钥协商协议的改进%Improvement of a key agreement protocol for Web service in wireless network

    Institute of Scientific and Technical Information of China (English)

    杨霄彩

    2011-01-01

    极大的商务应用潜力对无线网络中Web服务的安全与效率提出了更高的要求,其中之一就是密钥协商问题。研究者从不同角度提出基于口令的密钥协商改进方案。近期,张学英与杨晋吉提出的一种无线环境下的Web服务身份认证密钥协商协议(Z-Y协议)经证明存在严重的安全缺陷。改进方案不仅继承原协议较高的效率和基本安全属性,而且能够有效地抵抗中间人攻击和重放攻击,弥补了原协议安全性能的不足。%Great potential of business applications requires Web service in wireless network more secure and more efficient,one of issues is the key agreement.Researchers put forward password-based key agreements improved from different perspectives.Recently,a key agreement protocol for Web service authentication in wireless environment was put forward by Zhang Xue-ying and Yang Jin-ji,.Z-Y's protocol is proved to exist serious security flaws.An improved scheme not only inherits the high efficiency and basic security properties of Z-Y's protocol,but also can effectively resist MITM attack and replay attack,which makes up lack of security of the original protocol.

  12. Improved Error Concealment Algorithm for H.264 Wireless Networks%基于无线网络的H.264误码掩盖算法的改进

    Institute of Scientific and Technical Information of China (English)

    侯艳艳

    2011-01-01

    The compressed video stream will be corrupted because of the serious wireless network packet loss, which may degrade the reconstructed image quality. In this paper, an adaptive selection MB mode for the lost MB is presented based on the temporal and spatial neighboring motion vectors, and an improved boundary match error function is adopted to estimate lost MB motion vectors. Simulation results show that the proposed method yields better video quality for a variety of video sequences and different MB loss rate in the wireless transmission environment. The peak signal to noise ratio is improved 0.08~ 1.13 dB over the traditional H.264 algorithm when MB loss rate is 10%.%视频压缩码流在无线网络传输过程中受无线网络环境的影响丢包现象严重,重构图像质量下降.在H.264时域误码掩盖算法的基础上,根据时域和空域相邻宏块的运动矢量对丢失宏块的分割模式进行自适应选择,采用改进的边界匹配误差函数,估计丢失宏块的运动矢量.在无线网络环境下对多种视频序列和宏块丢失率进行仿真,图像质量有一定的提高.在宏块丢失率为10%情况下,峰值信噪比相对H.264标准算法提高0.08~1.13 dB.

  13. 采用RSSI提高无线传感网络定位精度的算法%An Algorithm of Improving Positioning Accuracy of Wireless Sensor Networks Using RSSI

    Institute of Scientific and Technical Information of China (English)

    李双明; 武庆威

    2015-01-01

    为了提高无线传感网络中节点的定位精度,同时又希望降低节点的定位开销,提出接收信号强度( RSSI)定位算法。以RSSI和三边定位原理为基础,详细阐述了该算法的定位思想,以伪代码的形式描述未知节点定位的实现过程。从存储、计算和通信开销3个方面与ALA方案做了定性分析,针对不同的冗余系数、不同的定位轮数和不同的信标数量进行了仿真,与ALA方案做了定量分析。分析结果表明,该算法达到了提高无线传感网络定位精度的目的。%To improve the localization accuracy in wireless sensor network,but also hope to reduce the overhead of locating nodes, an algorithm is proposed.With RSSI and trilateral positioning principle as the foundation,this paper elaborates ideological orientation, and describes the implementation process of unknown node localization in pseudo code form.Compared with ALA program,the storage, computing,and communication overhead are taken for qualitative analysis. Simulations are quantitatively analyzed with different redundancy factor,different positioning rounds and different numbers of beacon. The results show that the algorithm can improve the positioning accuracy of wireless sensor network.

  14. Improvement of productivity in acetic acid fermentation with Clostridium thermoaceticum

    Energy Technology Data Exchange (ETDEWEB)

    Shah, M.M.; Cheryan, M. [Univ. of Illinois, Urbana, IL (United States)

    1995-12-31

    Production of acetic acid by a mutant strain of Clostridium thermoaceticum was compared in three types of membrane cell-recycle bioreactors. A modified fed-batch bioreactor (where the product is partially removed at the end of fermentation, but the cells are retained), and a two-stage CSTR (with product being removed continuously and the cells being recycled from the second to the first stage) resulted in better performance than a one-stage CSTR or batch fermenter. The difference in performance was greater at higher acetate concentration. With 45 g/L of glucose in the feed, productivity was 0.75-1.12 g/L-h and acetic acid concentrations were 34-38 g/L. This is more than double the batch system. The nutrient supply rate also appeared to have a strong influence on productivity of the microorganism.

  15. Improving Potato Production in Kenya, Uganda and Ethiopia: A System Diagnosis

    NARCIS (Netherlands)

    Gildemacher, P.R.; Kaguongo, W.; Ortiz, O.; Tesfaye, A.; Woldegiorgis, G.; Wagoire, W.W.; Kakuhenzire, R.; Kinyae, P.; Nyongesa, M.; Struik, P.C.; Leeuwis, C.

    2009-01-01

    Increased productivity of potatoes can improve the livelihood of smallholder potato farmers in Kenya, Uganda and Ethiopia and is required to meet the growing demand. This paper investigates the opportunities for potato system improvement that could result in improved productivity. Through a diagnosi

  16. Metabolic engineering for improved production of ethanol by Corynebacterium glutamicum.

    Science.gov (United States)

    Jojima, Toru; Noburyu, Ryoji; Sasaki, Miho; Tajima, Takahisa; Suda, Masako; Yukawa, Hideaki; Inui, Masayuki

    2015-02-01

    Recombinant Corynebacterium glutamicum harboring genes for pyruvate decarboxylase (pdc) and alcohol dehydrogenase (adhB) can produce ethanol under oxygen deprivation. We investigated the effects of elevating the expression levels of glycolytic genes, as well as pdc and adhB, on ethanol production. Overexpression of four glycolytic genes (pgi, pfkA, gapA, and pyk) in C. glutamicum significantly increased the rate of ethanol production. Overexpression of tpi, encoding triosephosphate isomerase, further enhanced productivity. Elevated expression of pdc and adhB increased ethanol yield, but not the rate of production. Fed-batch fermentation using an optimized strain resulted in ethanol production of 119 g/L from 245 g/L glucose with a yield of 95% of the theoretical maximum. Further metabolic engineering, including integration of the genes for xylose and arabinose metabolism, enabled consumption of glucose, xylose, and arabinose, and ethanol production (83 g/L) at a yield of 90 %. This study demonstrated that C. glutamicum has significant potential for the production of cellulosic ethanol.

  17. GENETICALLY MODIFIED LIGNOCELLULOSIC BIOMASS FOR IMPROVEMENT OF ETHANOL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Qijun Wang

    2010-02-01

    Full Text Available Production of ethanol from lignocellulosic feed-stocks is of growing interest worldwide in recent years. However, we are currently still facing significant technical challenges to make it economically feasible on an industrial scale. Genetically modified lignocellulosic biomass has provided a potential alternative to address such challenges. Some studies have shown that genetically modified lignocellulosic biomass can increase its yield, decreasing its enzymatic hydrolysis cost and altering its composition and structure for ethanol production. Moreover, the modified lignocellulosic biomass also makes it possible to simplify the ethanol production procedures from lignocellulosic feed-stocks.

  18. Strategies for improving productive thinking in the language impaired adult.

    Science.gov (United States)

    Jenning, E A; Lubinski, R B

    1981-07-01

    The purpose of this article is to discuss a cognitive approach to therapy with a language impaired adult. Two types of productive thinking are explored in this research: concept awareness and problem solving. These are dynamic and creative processes underlying the development and use of cognition and language. This single subject study follows an ABAB design and describes techniques used in therapy and methods for measuring productive thinking in a 66-yr-old moderately language impaired adult. Results indicate a sharp increase in the subject's thought productivity in a variety of contexts. A critical appraisal of reasons for therapy effectiveness are given.

  19. Provide good air quality for people and improve their productivity

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    quality. The impact on productivity justifies a much higher indoor air quality than the minimum levels prescribed in present standards and guidelines. One way of providing air of high quality for people to breathe, without involving excessive ventilation rates and energy use, is to provide "personalized......Three recent independent studies have documented that the quality of indoor air has a significant and positive influence on the productivity of office workers. A combined analysis of the results of the three studies shows a significant relationship between productivity and perceived indoor air...

  20. Wireless Sensor Portal Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Mobitrum Corporation has demonstrated the feasibility in the Phase I of " A Wireless Sensor Portal Technology" and proposes a Phase II effort to develop a wireless...