Mitigation Monitoring Plan

Energy Technology Data Exchange (ETDEWEB)

1992-09-01

The Final Supplemental Environmental Impact Report (SEIR) (September 1992) for the Proposed Renewal of the Contract between the United States Department of Energy and The Regents of the University of California for the Operation and Management of the Lawrence Berkeley Laboratory identifies the environmental impacts associated with renewing the contract and specifies a series of measures designed to mitigate adverse impacts to the environment. This Mitigation Monitoring Plan describes the procedures the University will use to implement the mitigation measures adopted in connection with the approval of the Contract.

West Valley demonstration project: Implementation of the kerosene mitigation plan

International Nuclear Information System (INIS)

Blickwedehl, R.R.; Goodman, J.; Valenti, P.J.

1987-05-01

An aggressive program was implemented to mitigate the migration of radioactive kerosene believed to have originated from the West Valley NRC-Licensed Disposal Area (NDA) disposal trenches designated as SH-10 and SH-11 (Special Holes 10 and 11). This report provides a historical background of the events leading to the migration problem, the results of a detailed investigation to determine the location and source of the kerosene migration, the remediation plan to mitigate the migration, and the actions taken to successfully stabilize the kerosene. 7 refs., 19 figs., 1 tab

FEMA Hazard Mitigation Grants Program Summary

Data.gov (United States)

Department of Homeland Security — The Hazard Mitigation Grant Program (HMGP, CFDA Number: 97.039) provides grants to States and local governments to implement long-term hazard mitigation measures...

A web-based tool for ranking landslide mitigation measures

Science.gov (United States)

Lacasse, S.; Vaciago, G.; Choi, Y. J.; Kalsnes, B.

2012-04-01

As part of the research done in the European project SafeLand "Living with landslide risk in Europe: Assessment, effects of global change, and risk management strategies", a compendium of structural and non-structural mitigation measures for different landslide types in Europe was prepared, and the measures were assembled into a web-based "toolbox". Emphasis was placed on providing a rational and flexible framework applicable to existing and future mitigation measures. The purpose of web-based toolbox is to assist decision-making and to guide the user in the choice of the most appropriate mitigation measures. The mitigation measures were classified into three categories, describing whether the mitigation measures addressed the landslide hazard, the vulnerability or the elements at risk themselves. The measures considered include structural measures reducing hazard and non-structural mitigation measures, reducing either the hazard or the consequences (or vulnerability and exposure of elements at risk). The structural measures include surface protection and control of surface erosion; measures modifying the slope geometry and/or mass distribution; measures modifying surface water regime - surface drainage; measures mo¬difying groundwater regime - deep drainage; measured modifying the mechanical charac¬teristics of unstable mass; transfer of loads to more competent strata; retaining structures (to modify slope geometry and/or to transfer stress to compe¬tent layer); deviating the path of landslide debris; dissipating the energy of debris flows; and arresting and containing landslide debris or rock fall. The non-structural mitigation measures, reducing either the hazard or the consequences: early warning systems; restricting or discouraging construction activities; increasing resistance or coping capacity of elements at risk; relocation of elements at risk; sharing of risk through insurance. The measures are described in the toolbox with fact sheets providing a

Social and ethical perspectives of landslide risk mitigation measures

Science.gov (United States)

Kalsnes, Bjørn; Vangelsten, Bjørn V.

2015-04-01

Landslide risk may be mitigated by use of a wide range of measures. Mitigation and prevention options may include (1) structural measures to reduce the frequency, severity or exposure to the hazard, (2) non-structural measures, such as land-use planning and early warning systems, to reduce the hazard frequency and consequences, and (3) measures to pool and transfer the risks. In a given situation the appropriate system of mitigation measures may be a combination of various types of measures, both structural and non-structural. In the process of choosing mitigation measures for a given landslide risk situation, the role of the geoscientist is normally to propose possible mitigation measures on basis of the risk level and technical feasibility. Social and ethical perspectives are often neglected in this process. However, awareness of the need to consider social as well as ethical issues in the design and management of mitigating landslide risk is rising. There is a growing understanding that technical experts acting alone cannot determine what will be considered the appropriate set of mitigation and prevention measures. Issues such as environment versus development, questions of acceptable risk, who bears the risks and benefits, and who makes the decisions, also need to be addressed. Policymakers and stakeholders engaged in solving environmental risk problems are increasingly recognising that traditional expert-based decision-making processes are insufficient. This paper analyse the process of choosing appropriate mitigation measures to mitigate landslide risk from a social and ethical perspective, considering technical, cultural, economical, environmental and political elements. The paper focus on stakeholder involvement in the decision making process, and shows how making strategies for risk communication is a key for a successful process. The study is supported by case study examples from Norway and Italy. In the Italian case study, three different risk mitigation

FOLLOW-UP RADON MEASUREMENTS IN 14 MITIGATED SCHOOLS

Science.gov (United States)

The report gives results of a determination of the long-term performance of radon mitigation systems installed in U. S. EPA research schools: radon measurements were conducted in 14 schools that had been mitigated between 1988 and 1991. The measurements were made between Februar...

FEMA Hazard Mitigation Grants Program Summary - API

Data.gov (United States)

Department of Homeland Security — The Hazard Mitigation Grant Program (HMGP, CFDA Number: 97.039) provides grants to States and local governments to implement long-term hazard mitigation measures...

Proceedings of the OECD/NEA/CSNI workshop on the implementation of hydrogen mitigation techniques

International Nuclear Information System (INIS)

Koroll, G.W.; Rohde, J.; Royen, J.

1997-03-01

The Workshop on the Implementation of Hydrogen Mitigation Techniques was held in Winnipeg, Manitoba,Canada from 1996 May 13 to 15. It was organized in collaboration with the Whiteshell Laboratories of Atomic Energy of Canada Limited (AECL), Ontario Hydro and the CANDU Owner's Group (COG). Sixty-five experts from twelve OECD Member countries and the Russian Federation attended the meeting. Papers presented in the sessions included topics: accident management and analysis, relevant aspects of hydrogen production, distribution and mixing, engineering, technology, possible side-effects consequences and new designs. The objectives of the Workshop were the following: to establish the state of the art of hydrogen mitigation techniques, with emphasis on igniters and catalytic recombiners; to exchange information on Member countries' strategies in managing hydrogen mitigation, and to establish dialogue as to differences in approach; to determine whether there is now an adequate technical basis for such strategies or whether more work is needed; to exchange information on future plans for implementation of hydrogen mitigation techniques

Mitigation technologies and measures in energy sector of Kazakstan

Energy Technology Data Exchange (ETDEWEB)

Pilifosova, O.; Danchuk, D.; Temertekov, T. [and others

1996-12-31

An important commitment in the UN Framework Convention on Climate Change is to conduct mitigation analysis and to communicate climate change measures and policies. In major part reducing CO{sub 2} as well as the other greenhouse gas emissions in Kazakstan, can be a side-product of measures addressed to increasing energy efficiency. Since such measures are very important for the national economy, mitigation strategies in the energy sector of Kazakstan are directly connected with the general national strategy of the energy sector development. This paper outlines the main measures and technologies in energy sector of Kazakstan which can lead to GHG emissions reduction and presents the results of current mitigation assessment. The mitigation analysis is addressed to energy production sector. A baseline and six mitigation scenarios were developed to evaluate the most attractive mitigation options, focusing on specific technologies which have been already included in sustainable energy programs. According to the baseline projection, Kazakstan`s CO{sub 2} emissions will not exceed their 1990 level until 2005. The potential for CO{sub 2} emission reduction is estimated to be about 11 % of the base line emission level by the end of considered period (in 2020). The main mitigation options in the energy production sector in terms of mitigation potential and technical and economical feasibility include rehabilitation of thermal power plants aimed to increasing efficiency, use of nuclear energy and further expansion in the use of hydro energy based on small hydroelectric power plants.

Proceedings of the OECD/NEA/CSNI workshop on the implementation of hydrogen mitigation techniques

Energy Technology Data Exchange (ETDEWEB)

Koroll, G.W. [Atomic Energy of Canada Limited, Pinawa, Manitoba (Canada); Rohde, J. [GRS, Koln (Germany); Royen, J. [OECD NEA, Issy-les-Moulineaux (France)

1997-03-01

The Workshop on the Implementation of Hydrogen Mitigation Techniques was held in Winnipeg, Manitoba,Canada from 1996 May 13 to 15. It was organized in collaboration with the Whiteshell Laboratories of Atomic Energy of Canada Limited (AECL), Ontario Hydro and the CANDU Owner's Group (COG). Sixty-five experts from twelve OECD Member countries and the Russian Federation attended the meeting. Papers presented in the sessions included topics: accident management and analysis, relevant aspects of hydrogen production, distribution and mixing, engineering, technology, possible side-effects consequences and new designs. The objectives of the Workshop were the following: to establish the state of the art of hydrogen mitigation techniques, with emphasis on igniters and catalytic recombiners; to exchange information on Member countries' strategies in managing hydrogen mitigation, and to establish dialogue as to differences in approach; to determine whether there is now an adequate technical basis for such strategies or whether more work is needed; to exchange information on future plans for implementation of hydrogen mitigation techniques.

Implementation of equity in resource allocation for regional earthquake risk mitigation using two-stage stochastic programming.

Science.gov (United States)

Zolfaghari, Mohammad R; Peyghaleh, Elnaz

2015-03-01

This article presents a new methodology to implement the concept of equity in regional earthquake risk mitigation programs using an optimization framework. It presents a framework that could be used by decisionmakers (government and authorities) to structure budget allocation strategy toward different seismic risk mitigation measures, i.e., structural retrofitting for different building structural types in different locations and planning horizons. A two-stage stochastic model is developed here to seek optimal mitigation measures based on minimizing mitigation expenditures, reconstruction expenditures, and especially large losses in highly seismically active countries. To consider fairness in the distribution of financial resources among different groups of people, the equity concept is incorporated using constraints in model formulation. These constraints limit inequity to the user-defined level to achieve the equity-efficiency tradeoff in the decision-making process. To present practical application of the proposed model, it is applied to a pilot area in Tehran, the capital city of Iran. Building stocks, structural vulnerability functions, and regional seismic hazard characteristics are incorporated to compile a probabilistic seismic risk model for the pilot area. Results illustrate the variation of mitigation expenditures by location and structural type for buildings. These expenditures are sensitive to the amount of available budget and equity consideration for the constant risk aversion. Most significantly, equity is more easily achieved if the budget is unlimited. Conversely, increasing equity where the budget is limited decreases the efficiency. The risk-return tradeoff, equity-reconstruction expenditures tradeoff, and variation of per-capita expected earthquake loss in different income classes are also presented. © 2015 Society for Risk Analysis.

The influence of risk mitigation measures on the risks, costs and routing of CO2 pipelines

NARCIS (Netherlands)

Knoope, M. M J|info:eu-repo/dai/nl/364248149; Raben, I. M E; Ramírez, A.|info:eu-repo/dai/nl/284852414; Spruijt, M. P N; Faaij, A. P C|info:eu-repo/dai/nl/10685903X

2014-01-01

The aim of this study was to analyze whether, and if so, in what way risks would influence the design, costs and routing of CO2 pipelines. This article assesses locational and societal risks of CO2 pipeline transport and analyses whether rerouting or implementing additional risk mitigation measures

The influence of risk mitigation measures on the risks, costs and routing of CO 2pipelines

NARCIS (Netherlands)

Knoope, M.M.J.; Raben. I.M.E.; Ramírez, A.; Spruijt, M.P.N.; Faaij, A.P.C.

2014-01-01

The aim of this study was to analyze whether, and if so, in what way risks would influence the design,costs and routing of CO2pipelines. This article assesses locational and societal risks of CO2pipelinetransport and analyses whether rerouting or implementing additional risk mitigation measures is

The Effects of Mitigation Measures on Flood Damage Prevention in Korea

Directory of Open Access Journals (Sweden)

Cheol-Hee Son

2015-12-01

Full Text Available This study analyzed the characteristics of flood damages and the effects of structural and non-structural flood damage mitigation measures in Korea. First, a theoretical discussion of the structural and non-structural measures to mitigate flood damages was used to select the variables and devise the hypotheses. An analysis was conducted using the Auto-Regressive Integrated Moving-Average (ARIMA time series methodology, Korean socioeconomic data, and damage characteristics of major flood events. The effects of flood damage mitigation measures on the extent of flood damages were assessed using an intervention time series model. The major findings were that the intervention effects of structural and non-structural measures were statistically significant from 1958 to 2013 (a period of 55 years and that while the former were ineffective at mitigating flood damages, the latter were successful in doing so. Based on the above findings, policy suggestions for future flood damage mitigation measures in Korea were offered. For structural measures, the government should manage its existing facilities, recover ecosystems of damaged rivers, and devise mitigation measures for urban areas. For non-structural measures, the government should enhance its flood forecasting capacity, revise laws related to flood control and prevention, and update and rationalize land-use plans.

Measuring reporting verifying. A primer on MRV for nationally appropriate mitigation actions

Energy Technology Data Exchange (ETDEWEB)

Hinostroza, M. (ed.); Luetken, S.; Holm Olsen, K. (Technical Univ. of Denmark. UNEP Risoe Centre, Roskilde (Denmark)); Aalders, E.; Pretlove, B.; Peters, N. (Det Norske Veritas, Hellerup (Denmark))

2012-03-15

The requirements for measurement, reporting and verification (MRV) of nationally appropriate mitigation actions (NAMAs) are one of the crucial topics on the agenda of international negotiations to address climate change mitigation. According to agreements so far, the general guidelines for domestic MRV are to be developed by Subsidiary Body for Scientific and Technological Advice (SBSTA)1. Further, the Subsidiary Body for Implementation (SBI) will be conducting international consultations and analysis (ICA) of biennial update reports (BUR) to improve transparency of mitigation actions, which should be measured, reported and verified. 2. What is clear from undergoing discussions both at SBSTA and at SBI is that MRV for NAMAs should not be a burden for controlling greenhouse gas (GHG) emissions connected to economic activities. Instead, the MRV process should facilitate mitigation actions; encourage the redirection of investments and address concerns regarding carbon content of emission intensive operations of private and public companies and enterprises worldwide. While MRV requirements are being shaped within the Convention, there are a number of initiatives supporting developing countries moving forward with NAMA development and demonstration activities. How these actions shall be measured, reported and verified, however, remain unanswered. MRV is not new. It is present in most existing policies and frameworks related to climate change mitigation. With an aim to contribute to international debate and capacity building on this crucial issue, the UNEP Risoe Centre in cooperation with UNDP, are pleased to present this publication that through the direct collaboration with Det Norske Veritas (DNV) builds on existing MRV practices in current carbon markets; provides insights on how MRV for NAMAs can be performed and identifies elements and drivers to be considered when designing adequate MRV systems for NAMAs in developing countries. This primer is the second

Nurses' Perceptions of Implementing Fall Prevention Interventions to Mitigate Patient-Specific Fall Risk Factors.

Science.gov (United States)

Wilson, Deleise S; Montie, Mary; Conlon, Paul; Reynolds, Margaret; Ripley, Robert; Titler, Marita G

2016-08-01

Evidence-based (EB) fall prevention interventions to mitigate patient-specific fall risk factors are readily available but not routinely used in practice. Few studies have examined nurses' perceptions about both the use of these EB interventions and implementation strategies designed to promote their adoption. This article reports qualitative findings of nurses' perceptions about use of EB fall prevention interventions to mitigate patient-specific fall risks, and implementation strategies to promote use of these interventions. The findings revealed five major themes: before-study fall prevention practices, use of EB fall prevention interventions tailored to patient-specific fall risk factors, beneficial implementation strategies, overall impact on approach to fall prevention, and challenges These findings are useful to guide nurses' engagement and use of EB fall prevention practices tailored to patient-specific fall risk factors. © The Author(s) 2016.

An attempt to implement tools to support examination of community-based activities for disaster mitigation: A case study in Toyokawa city, Japan

Science.gov (United States)

Karashima, Kazuki; Ohgai, Akira

2017-10-01

Japan is a country with a high risk for earthquake disasters. The measures used to promote structures' seismic safety, such as reconstruction, widening narrow roads, and the response capacities to deal with huge earthquakes are important. Techniques to support the examination of countermeasures to huge earthquakes are required. To improve this capability, the authors developed tools to: (1) evaluate fire-spread risk, (2) evaluate the difficulty of emergency response and evacuation, and (3) evaluate capacities of neighborhood communities for disaster mitigation. The usefulness of the tools was clarified by the demonstration experiments of previous studies. The next step was implementation of the tools in community-based activities for disaster mitigation. This study aimed to clarify the usability and problems of implementing the tools in community-based activities. The tools were used at several workshops in actual community-based activities for disaster mitigation for one year. After the last workshop, interviews and a questionnaire were conducted on municipal staff and consultant staff. The results found that the tools visually showed the fire-spread risk, the difficulty of evacuation under current conditions and after improvements, and the effects of each disaster mitigation activity. The users could easily explore the draft plans to promote seismic safety of urban structures and response capabilities. The tools were positively incorporated into some community-based activities for disaster mitigation. Thus, the tools have the possibility of successful use at continuing community-based activities and the possibility of implementing the tools will be promoted.

Implementation of severe accident management measures - Summary and conclusions

International Nuclear Information System (INIS)

2002-01-01

The objectives of the meeting were: 1) to exchange information on activities in the area of SAM implementation and on the rationale for such actions, 2) to monitor progress made, 3) to identify cases of agreement or disagreement, 4) to discuss future orientations of work, 5) to make recommendations to the CSNI. Session summaries prepared by the Chairpersons and discussed by the whole writing group are given in Annex. During the first session, 'SAM Programmes Implementation', papers from one regulator and several utilities and national research institutes were presented to outline the status of implementation of SAM programmes in countries like Switzerland, Russia, Spain, Finland, Belgium and Korea. Also, the contribution of SAM to the safety of Japanese plants (in terms of core damage frequency) was quantified in a paper. One paper gave an overview on the situation regarding SAM implementation in Europe. The second session, 'SAM Approach', provided background and bases for Severe Accident Management in countries like Sweden, Japan, Germany and Switzerland, as well as for hardware features in advanced light water reactor designs, such as the European Pressurised Reactor (EPR), regarding Severe Accident Management. The third session, 'SAM Mitigation Measures', was about hardware measures, in particular those oriented towards hydrogen mitigation where fundamentally different approaches have been taken in Scandinavian countries, France, Germany and Korea. Three papers addressed specific contributions from research to provide a broader basis for the assumptions made in certain computer codes used for the assessment of plant risk arising from beyond-design accident sequences. The fourth session, 'Implementation of SAM Measures on VVER-1000 Reactors', was about the status of work on Severe Accident Management implementation in VVER reactors of existing design and in a new plant currently under construction. The overall picture is that Severe Accident Management has been

Mitigation measures for the La Grande 1 hydroelectric development

International Nuclear Information System (INIS)

Faucher, O.; Gagnon, R.

1992-01-01

Measures to mitigate environmental impacts of the La Grande 1 hydroelectric development are described. An overview is presented of the La Grande 1 project, its surrounding environment, and the principle environmental repercussions of the reservoir, hydrological changes between the dam and river mouth, construction activities and permanent and temporary structures, and presence of workers. Mitigation measures including compensation, corrective measures (deforestation, selective cutting, fish populations, wildlife populations, land rehabilitation, access roads, fisheries, and erosion control), protective measures, enhancement measures, and contract and employment opportunities for the Cree population are described. 10 refs., 2 figs

Stress analysis and mitigation measures for floating pipeline

Science.gov (United States)

Wenpeng, Guo; Yuqing, Liu; Chao, Li

2017-03-01

Pipeline-floating is a kind of accident with contingency and uncertainty associated to natural gas pipeline occurring during rainy season, which is significantly harmful to the safety of pipeline. Treatment measures against pipeline floating accident are summarized in this paper on the basis of practical project cases. Stress states of pipeline upon floating are analyzed by means of Finite Element Calculation method. The effectiveness of prevention ways and subsequent mitigation measures upon pipeline-floating are verified for giving guidance to the mitigation of such accidents.

A new modelling framework and mitigation measures for increased resilience to flooding

Science.gov (United States)

Valyrakis, Manousos; Alexakis, Athanasios; Solley, Mark

2015-04-01

Flooding in rivers and estuaries is amongst the most significant challenges our society has yet to tackle effectively. Use of floodwall systems is one of the potential measures that can be used to mitigate the detrimental socio-economical and ecological impacts and alleviate the associated costs of flooding. This work demonstrates the utility of such systems for a case study via appropriate numerical simulations, in addition to conducting scaled flume experiments towards obtaining a better understanding of the performance and efficiency of the flood-wall systems. At first, the results of several characteristic inundation modeling scenarios and flood mitigation options, for a flood-prone region in Scotland. In particular, the history and hydrology of the area are discussed and the assumptions and hydraulic model input (model geometry including instream hydraulic structures -such as bridges and weirs- river and floodplain roughness, initial and boundary conditions) are presented, followed by the model results. Emphasis is given on the potential improvements brought about by mitigating flood risk using flood-wall systems. Further, the implementation of the floodwall in mitigating flood risk is demonstrated via appropriate numerical modeling, utilizing HEC-RAS to simulate the effect of a river's rising stage during a flood event, for a specific area. The later part of this work involves the design, building and utilization of a scaled physical model of a flood-wall system. These experiments are carried out at one of the research flumes in the Water Engineering laboratory of the University of Glasgow. These involve an experimental investigation where the increase of force applied on the floodwall is measured for different degrees of deflection of the water in the stream, under the maximum flow discharge that can be carried through without exceeding the floodwall height (and accounting for the effect of super-elevation). These results can be considered upon the

50 CFR 218.183 - Mitigation.

Science.gov (United States)

2010-10-01

... within the command structure in order to facilitate implementation of mitigation measures if marine... attention to the things on the outer edges of their field of vision. (viii) Marine observers shall be...

Implementing climate change mitigation in health services: the importance of context.

Science.gov (United States)

Desmond, Sharon

2016-10-01

Academic interest in strategies to reduce the impact of health services on climate change is quickening. Research has largely focused on local innovations with little consideration of the contextual and systemic elements that influence sustainable development across health systems. A realistic framework specifically to guide decision-making by health care providers is still needed. To address this deficit, the literature is explored in relation to health services and climate change mitigation strategies, and the contextual factors that influence efforts to mitigate climate effects in health service delivery environments are highlighted. A conceptual framework is proposed that offers a model for the pursuit of sustainable development practice in health services. A set of propositions is advanced to provide a systems approach to assist decision-making by decoding the challenges faced in implementing sustainable health services. This has important implications for health care providers, funders and legislators since the financial, policy and regulatory environment of health care, along with its leadership and models of care generally conflict with carbon literacy and climate change mitigation strategies. © The Author(s) 2016.

Flicker Detection, Measurement and Means of Mitigation: A Review

Science.gov (United States)

Virulkar, V. B.; Aware, M. V.

2014-04-01

The voltage fluctuations caused by rapid industrial load change have been a major concern for supply utilities, regulatory agencies and customers. This paper gives a general review about how to examine/assess voltage flicker and methods followed in measuring the flickers due to rapid changing loads and means for its mitigation. It discusses the effects on utilities conditions, compensators response time and compensator capacity of flicker mitigation. A comparison between conventional mitigation techniques and the state-of-art mitigation techniques are carried out. It is shown in many cases that the state-of-art solution provides higher performance compared with conventional mitigation techniques. However, the choice of most suitable solution depends on characteristics of the supply at the point of connection, the requirement of the load and economics.

Strategies for implementation of CO2-mitigation options in Nigeria's energy sector

International Nuclear Information System (INIS)

Ibitoye, F.I.; Akinbami, J.-F.K.

1999-01-01

Recent studies indicate that Nigeria's CO 2 budget was about 164 million tonnes (MTons) in 1990, of which the energy sector contributed close to 55%. It is expected that CO 2 emissions emanating from the energy sector will increase from 90 MTons in 1990 to about 3 times this value in another 30 years, assuming a least-cost moderate development scenario. A number of viable CO 2 -mitigation options have already been identified in the energy sector, some of them the so-called 'win-win' options. As attractive as some of these options might appear, their implementation will depend on the removal of certain barriers. These barriers include a lack of legislative framework, a lack of awareness, a lack of access to appropriate technology, as well as inappropriate energy-pricing policies, among others. The paper presents an overview of Nigeria's energy-sector, the CO 2 mitigation-options, the factors militating against implementation of the options, and some policy recommendations for removal of the barriers. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

Screening method to assess the greenhouse gas mitigation potential of old landfills, based on downwind methane concentration measurements

DEFF Research Database (Denmark)

Fredenslund, Anders Michael; Mønster, J.; Kjeldsen, Peter

2017-01-01

A nationwide effort is taking place in Denmark to mitigate methane emissions from landfills, by using biocovers. A large number of older landfills were found to be potential candidates for biocover implementation, but very little information was available for these sites to help evaluate if signi......A nationwide effort is taking place in Denmark to mitigate methane emissions from landfills, by using biocovers. A large number of older landfills were found to be potential candidates for biocover implementation, but very little information was available for these sites to help evaluate...... if significant methane emissions occur. To assess these sites, we developed a low-cost and quick remote sensing methodology, whereby downwind methane concentrations from 91 landfills were measured using a mobile analytical platform, and emission rates were calculated using an inverse dispersion model. The method...

Is wetland mitigation successful in Southern California?

Science.gov (United States)

Cummings, D. L.; Rademacher, L. K.

2004-12-01

Wetlands perform many vital functions within their landscape position; they provide unique habitats for a variety of flora and fauna and they act as treatment systems for upstream natural and anthropogenic waste. California has lost an estimated 91% of its wetlands. Despite the 1989 "No Net Loss" policy and mitigation requirements by the regulatory agencies, the implemented mitigation may not be offsetting wetlands losses. The "No Net Loss" policy is likely failing for numerous reasons related to processes in the wetlands themselves and the policies governing their recovery. Of particular interest is whether these mitigation sites are performing essential wetlands functions. Specific questions include: 1) Are hydric soil conditions forming in mitigation sites; and, 2) are the water quality-related chemical transformations that occur in natural wetlands observed in mitigation sites. This study focuses on success (or lack of success) in wetlands mitigation sites in Southern California. Soil and water quality investigations were conducted in wetland mitigation sites deemed to be successful by vegetation standards. Observations of the Standard National Resource Conservation Service field indicators of reducing conditions were made to determine whether hydric soil conditions have developed in the five or more years since the implementation of mitigation plans. In addition, water quality measurements were performed at the inlet and outlet of these mitigation sites to determine whether these sites perform similar water quality transformations to natural wetlands within the same ecosystem. Water quality measurements included nutrient, trace metal, and carbon species measurements. A wetland location with minimal anthropogenic changes and similar hydrologic and vegetative features was used as a control site. All sites selected for study are within a similar ecosystem, in the interior San Diego and western Riverside Counties, in Southern California.

Final Report. SFAA No. DEFC02-98CH10961. Technical assistance for joint implementation and other supporting mechanisms and measures for greenhouse gas emissions mitigation

Energy Technology Data Exchange (ETDEWEB)

Knight, Denise

2001-10-15

IIEC, a division of CERF, has developed an extensive base of experience implementing activities that support climate action by developing USIJI projects in transitional countries within Asia, Latin America, Central and Eastern Europe, and southern Africa. IIEC has been able to provide a range of technical and policy assistance to governments and industry in support of sustainable energy use. IIEC continues to work in key countries with local partners to develop and implement energy efficiency policies and standards, develop site-specific projects, and assist governing bodies to establish national priorities and evaluation criteria for approving GHG-mitigation projects. As part of this project, IIEC focused on promoting a series of activities in Thailand and South Africa in order to identify GHG mitigation projects and work within the national approval process of those countries. The sections of this report outline the activities conducted in each country in order to achieve that goal.

Long-term development and effectiveness of private flood mitigation measures: an analysis for the German part of the river Rhine

NARCIS (Netherlands)

Bubeck, P.; Botzen, W.J.W.; Kreibich, H.; Aerts, J.C.J.H.

2012-01-01

Flood mitigation measures implemented by private households have become an important component of contemporary integrated flood risk management in Germany and many other countries. Despite the growing responsibility of private households to contribute to flood damage reduction by means of private

Assessment of human thermal comfort and mitigation measures in different urban climatotopes

Science.gov (United States)

Müller, N.; Kuttler, W.

2012-04-01

This study analyses thermal comfort in the model city of Oberhausen as an example for the densely populated metropolitan region Ruhr, Germany. As thermal loads increase due to climate change negative impacts especially for city dwellers will arise. Therefore mitigation strategies should be developed and considered in urban planning today to prevent future thermal stress. The method consists of the combination of in-situ measurements and numerical model simulations. So in a first step the actual thermal situation is determined and then possible mitigation strategies are derived. A measuring network was installed in eight climatotopes for a one year period recording air temperature, relative humidity, wind speed and wind direction. Based on these parameters the human thermal comfort in terms of physiological equivalent temperature (PET) was calculated by RayMan Pro software. Thus the human comfort of different climatotopes was determined. Heat stress in different land uses varies, so excess thermal loads in urban areas could be detected. Based on the measuring results mitigation strategies were developed, such as increasing areas with high evaporation capacity (green areas and water bodies). These strategies were implemented as different plan scenarios in the microscale urban climate model ENVI-met. The best measure should be identified by comparing the range and effect of these scenarios. Simulations were run in three of the eight climatotopes (city center, suburban and open land site) to analyse the effectiveness of the mitigation strategies in several land use structures. These cover the range of values of all eight climatotopes and therefore provide representative results. In the model area of 21 ha total, the modified section in the different plan scenarios was 1 ha. Thus the effect of small-scale changes could be analysed. Such areas can arise due to population decline and structural changes and hold conversion potential. Emphasis was also laid on analysing the

Greenhouse gas emissions reduction in different economic sectors: Mitigation measures, health co-benefits, knowledge gaps, and policy implications.

Science.gov (United States)

Gao, Jinghong; Hou, Hongli; Zhai, Yunkai; Woodward, Alistair; Vardoulakis, Sotiris; Kovats, Sari; Wilkinson, Paul; Li, Liping; Song, Xiaoqin; Xu, Lei; Meng, Bohan; Liu, Xiaobo; Wang, Jun; Zhao, Jie; Liu, Qiyong

2018-05-15

To date, greenhouse gas (GHG) emissions, mitigation strategies and the accompanying health co-benefits in different economic sectors have not been fully investigated. The purpose of this paper is to review comprehensively the evidence on GHG mitigation measures and the related health co-benefits, identify knowledge gaps, and provide recommendations to promote further development and implementation of climate change response policies. Evidence on GHG emissions, abatement measures and related health co-benefits has been observed at regional, national and global levels, involving both low- and high-income societies. GHG mitigation actions have mainly been taken in five sectors: energy generation, transport, food and agriculture, household and industry, consistent with the main sources of GHG emissions. GHGs and air pollutants to a large extent stem from the same sources and are inseparable in terms of their atmospheric evolution and effects on ecosystem; thus, GHG reductions are usually, although not always, estimated to have cost effective co-benefits for public health. Some integrated mitigation strategies involving multiple sectors, which tend to create greater health benefits. The pros and cons of different mitigation measures, issues with existing knowledge, priorities for research, and potential policy implications were also discussed. Findings from this study can play a role not only in motivating large GHG emitters to make decisive changes in GHG emissions, but also in facilitating cooperation at international, national and regional levels, to promote GHG mitigation policies that protect public health from climate change and air pollution simultaneously. Copyright © 2018 Elsevier Ltd. All rights reserved.

Measuring, Reporting and Verifying Nationally Appropriate Mitigation Actions. Reflecting experiences under the Mitigation Momentum Project. Discussion paper

Energy Technology Data Exchange (ETDEWEB)

De Vit, C.; Roeser, F.; Fekete, H.; Hoehne, N.; Wartmann, S.; Van Tilburg, X.; Larkin, J.; Escalante, D.; Haensel, G.; Veum, K.; Cameron, L.; Halcomb, J.

2013-06-15

The Mitigation Momentum project aims to support the development of Nationally Appropriate Mitigation Actions (NAMAs). It contributes to the concrete design of NAMA proposals in five countries (Peru, Chile, Indonesia, Tunisia and Kenya). A further aim is to foster cooperation and knowledge exchange within the NAMA community while advancing the international climate policy debate on mitigation and related issues, including approaches for the Measurement, Reporting and Verification (MRV) of NAMAs. MRV enables the assessment of the effectiveness of both internationally supported NAMAs (supported NAMAs) and domestically supported NAMAs (unilateral NAMAs) by tracking NAMA impacts including greenhouse gas (GHG) emission reductions and non-GHG related impacts such as sustainable development benefits. MRV also supports improved policy design and decision making through systematic progress reporting and is a key tool to ensure accountability of NAMA stakeholders. Both host countries and funders share the common interest of having strong, implementable MRV systems in place. From both perspectives, this raises a number of questions, as well as potential challenges, on how to adapt the MRV approach to the specific circumstances of each NAMA. The objective of this paper is to identify open issues for the MRV of impacts of NAMAs, understood here as implementable actions, i.e. a project, a policy, a programme or a strategy. It pays particular attention to NAMAs with a supported component and reflects relevant initial experiences with developing NAMA proposals in the five Mitigation Momentum countries (i.e. using country examples where appropriate). As MRV systems for these NAMAs are still under development or at their preliminary stage, we hope to share further lessons learned in a subsequent discussion paper. Key challenges analysed in this paper include: How to design a MRV system that satisfies both the host country's and funder's expectations while complying with

Mitigative measures for the Laforge-2 hydroelectric development

International Nuclear Information System (INIS)

Faucher, O.; Gagnon, R.

1995-01-01

Corrective, preventive and enhancement measures undertaken as part of the development of the Laforge-2 Hydroelectric Power Plant, were described. The environment into which the project has been integrated was also described. General background information and technical characteristics of the Laforge-2 and Caniapiscau-Laforge diversion were provided. The Laforge-2 Mitigative Master Plan's measures for improving wildlife potential, cleaning-up of tributaries, protecting wildlife habitats, seeding around ponds and humid zones, installing platforms to encourage and facilitate the nesting of ospreys, and promoting proper harvesting of the territory, were described as corrective measures that will promote sustainable development. Contractual obligations to protect the environment were outlined. Enhancement measures described included reclamation of areas disturbed during construction, landscaping around main structures and construction of scenic lookouts. It was fully expected that the mitigative measures described for the Laforge-2 project will minimize negative impacts of the project and will maximize positive ones by improving wildlife potential in areas near the reservoir. 5 figs

Mitigation measures and programs in Hungary

Energy Technology Data Exchange (ETDEWEB)

Molnar, S. [Systemexpert Consulting Ltd., Budapest (Hungary)

1996-12-31

In Hungary there are four main governmental programs, which may result in a decrease of emissions of anthropogenic greenhouse gases (GHGs): (1) National program of energy efficiency improvement and energy conservation, (2) Afforestation program, (3) Volatile organic compounds (VOC) emission reduction program, and (4) Program to reduce the use of ozone depleting substances. These ambitious programs were launched in the beginning of the 90`s, but they have been slowed down because of budgetary problems. The comprehensive action plan for mitigation of GHG emissions should be based on these ongoing programs. These programs should be expanded by further measures and programs in order to fulfill the requirements of the FCCC. In the next sections the results and prospects of the above mentioned programs will be summarized. Also the results of the mitigation study supported by the U.S. Country Studies Program are included.

Long-run implications for developing countries of joint implementation of greenhouse gas mitigation

International Nuclear Information System (INIS)

Rose, A.; Bulte, E.; Folmer, H.

1999-01-01

Joint Implementation (JI) calls for cooperation between industrialized and developing countries in the mitigation of greenhouse gas (GHG) emissions. However, a major concern of potential host countries is that if they utilize their low-cost options for JI now, they will be left with only high cost options in the future, thereby penalizing them at a time when they may be obligated to mitigate GHGs themselves. This paper formalizes this hypothesis by utilizing an optimal control framework analogous to the Hotelling model of non-renewable resource extraction. The results are that cumulative abatement effects can impose costs on the future, but that they can be offset by technological change, market power, or compensation. 11 refs

FEMA Hazard Mitigation Grant Program - Property Acquisitions

Data.gov (United States)

Department of Homeland Security — HMGP provides grants to states and local governments to implement long-term hazard mitigation measures after a major disaster declaration. The HMGP is one of three...

The influence of governmental mitigation measures on contamination characteristics of PM(2.5) in Beijing.

Science.gov (United States)

Chen, Yuan; Schleicher, Nina; Chen, Yizhen; Chai, Fahe; Norra, Stefan

2014-08-15

Beijing, the capital of China, has become one of the most air-polluted cities due to its rapid economic growth. Weekly PM2.5 samples-collected continuously from 2007 to 2010-were used to study the contamination characteristics of atmospheric particles and effects of governmental mitigation measures especially since the 2008 Summer Olympic Games. PM2.5 mass concentrations during the sampling period were reduced compared to the previous studies before 2005, although they were still too high in comparison with environmental standards of China and many other countries as well as WHO standards. Results of principle component analysis show that elements of primary anthropogenic origin had an obvious decline while elements mainly from the natural environment kept a relatively stable course. The governmental macro-control measures influenced both anthropogenic and geogenic sources, but they also led to some pollution peaks prior to implementation of the respective measures. Some element concentrations correlated to the restrictiveness of relative measures, especially during different traffic restrictions. The comparison with other countries and international standards shows that there is a long way to go in order to improve air quality in Beijing, and that governmental mitigation measures need to be continued and reinforced. Copyright © 2014 Elsevier B.V. All rights reserved.

WHC natural phenomena hazards mitigation implementation plan

Energy Technology Data Exchange (ETDEWEB)

Conrads, T.J.

1996-09-11

Natural phenomena hazards (NPH) are unexpected acts of nature which pose a threat or danger to workers, the public or to the environment. Earthquakes, extreme winds (hurricane and tornado),snow, flooding, volcanic ashfall, and lightning strike are examples of NPH at Hanford. It is the policy of U.S. Department of Energy (DOE) to design, construct and operate DOE facilitiesso that workers, the public and the environment are protected from NPH and other hazards. During 1993 DOE, Richland Operations Office (RL) transmitted DOE Order 5480.28, ``Natural Phenomena Hazards Mitigation,`` to Westinghouse Hanford COmpany (WHC) for compliance. The Order includes rigorous new NPH criteria for the design of new DOE facilities as well as for the evaluation and upgrade of existing DOE facilities. In 1995 DOE issued Order 420.1, ``Facility Safety`` which contains the same NPH requirements and invokes the same applicable standards as Order 5480.28. It will supersede Order 5480.28 when an in-force date for Order 420.1 is established through contract revision. Activities will be planned and accomplished in four phases: Mobilization; Prioritization; Evaluation; and Upgrade. The basis for the graded approach is the designation of facilities/structures into one of five performance categories based upon safety function, mission and cost. This Implementation Plan develops the program for the Prioritization Phase, as well as an overall strategy for the implemention of DOE Order 5480.2B.

Guidance on the Implementation of Modifications to Mitigate Beyond Design Basis Accidents

Energy Technology Data Exchange (ETDEWEB)

Dermarkar, F.; Marczak, J.; O’Neill, M., E-mail: fred.dermarkar@opg.com [Ontario Power Generation, Pickering, Ontario (Canada)

2014-10-15

Following the events at Fukushima, Canadian Nuclear Power Plants (NPP) procured equipment and initiated modifications to improve response capability for Beyond Design Basis Accidents (BDBA). These changes were not typical of other design modifications to the nuclear power plants and reinforced the need for additional guidance for modifications to address BDBA. This paper describes the guidance that was developed to guide the design, procurement, installation, operation, and maintenance of equipment and modifications to mitigate BDBAs. The guidance developed prescribes a graded approach based on a categorization of the nature of the modification. Four categories of modifications are introduced, with the distinction being the degree of interface with existing design basis systems, structures and components (SSCs). This has resulted in a cost-effective means of implementing additional capability to mitigate BDBA conditions, and yet ensure the design basis capability of SSCs is maintained. (author)

Modelling mitigation options to reduce diffuse nitrogen water pollution from agriculture.

Science.gov (United States)

Bouraoui, Fayçal; Grizzetti, Bruna

2014-01-15

Agriculture is responsible for large scale water quality degradation and is estimated to contribute around 55% of the nitrogen entering the European Seas. The key policy instrument for protecting inland, transitional and coastal water resources is the Water Framework Directive (WFD). Reducing nutrient losses from agriculture is crucial to the successful implementation of the WFD. There are several mitigation measures that can be implemented to reduce nitrogen losses from agricultural areas to surface and ground waters. For the selection of appropriate measures, models are useful for quantifying the expected impacts and the associated costs. In this article we review some of the models used in Europe to assess the effectiveness of nitrogen mitigation measures, ranging from fertilizer management to the construction of riparian areas and wetlands. We highlight how the complexity of models is correlated with the type of scenarios that can be tested, with conceptual models mostly used to evaluate the impact of reduced fertilizer application, and the physically-based models used to evaluate the timing and location of mitigation options and the response times. We underline the importance of considering the lag time between the implementation of measures and effects on water quality. Models can be effective tools for targeting mitigation measures (identifying critical areas and timing), for evaluating their cost effectiveness, for taking into consideration pollution swapping and considering potential trade-offs in contrasting environmental objectives. Models are also useful for involving stakeholders during the development of catchments mitigation plans, increasing their acceptability. © 2013.

Hydrological and thermal effects of hydropeaking on early life stages of salmonids: A modelling approach for implementing mitigation strategies.

Science.gov (United States)

Casas-Mulet, Roser; Saltveit, Svein Jakob; Alfredsen, Knut Tore

2016-12-15

Alterations in hydrological and thermal regimes can potentially affect salmonid early life stages development and survival. The dewatering of salmon spawning redds due to hydropeaking can lead to mortality in early life stages, with higher impact on the alevins as they have lower tolerance to dewatering than the eggs. Flow-related mitigation measures can reduce early life stage mortality. We present a set of modelling tools to assess impacts and mitigation options to minimise the risk of mortality in early life stages in hydropeaking rivers. We successfully modelled long-term hydrological and thermal alterations and consequences for development rates. We estimated the risk of early life stages mortality and assessed the cost-effectiveness of implementing three release-related mitigation options (A,B,C). The economic cost of mitigation was low and ranged between 0.7% and 2.6% of the annual hydropower production. Options reducing the flow during spawning (B and C) in addition to only release minimum flows during development (A) were considered more effective for egg and alevin survival. Options B and C were however constraint by water availability in the system for certain years, and therefore only option A was always feasible. The set of modelling tools used in this study were satisfactory and their applications can be useful especially in systems where little field data is available. Targeted measures built on well-informed modelling tools can be tested on their effectiveness to mitigate dewatering effects vs. the hydropower system capacity to release or conserve water for power production. Environmental flow releases targeting specific ecological objectives can provide better cost-effective options than conventional operational rules complying with general legislation. Copyright © 2016 Elsevier B.V. All rights reserved.

Hungry Horse Mitigation : Flathead Lake : Annual Progress Report 2008.

Energy Technology Data Exchange (ETDEWEB)

Hansen, Barry; Evarts, Les [Confederated Salish and Kootenai Tribes

2009-08-06

The Confederated Salish and Kootenai Tribes (CSKT) and Montana Fish Wildlife and Parks (MFWP) wrote the 'Fisheries Mitigation Plan for Losses Attributable to the Construction and Operation of Hungry Horse Dam' in March 1991 to define the fisheries losses, mitigation alternatives and recommendations to protect, mitigate and enhance resident fish and aquatic habitat affected by Hungry Horse Dam. On November 12, 1991, the Northwest Power Planning Council (NPPC) approved the mitigation plan with minor modifications, called for a detailed implementation plan, and amended measures 903(h)(1) through (7). A long-term mitigation plan was submitted in August 1992, was approved by the Council in 1993, and the first contract for this project was signed on November 11, 1993. The problem this project addresses is the loss of habitat, both in quality and quantity, in the Flathead Lake and River basin resulting from the construction and operation of Hungry Horse Dam. The purpose of the project is to both implement mitigation measures and monitor the biological responses to those measures including those implemented by Project Numbers 9101903 and 9101904. Goals and objectives of the 1994 Fish and Wildlife Program (Section 10.1) addressed by this project are the rebuilding to sustainable levels weak, but recoverable, native populations injured by the hydropower system. The project mitigates the blockage of spawning runs by Hungry Horse Dam by restoring and even creating spawning habitats within direct drainages to Flathead Lake. The project also addresses the altered habitat within Flathead Lake resulting from species shifts and consequent dominance of new species that restricts the potential success of mitigation measures. Specific goals of this project are to create and restore habitat and quantitatively monitor changes in fish populations to verify the efficacy of our mitigation measures. The project consists of three components: monitoring, restoration and research

Hungry Horse Mitigation : Flathead Lake : Annual Progress Report 2007.

Energy Technology Data Exchange (ETDEWEB)

Hansen, Barry; Evarts, Les [Confederated Salish and Kootenai Tribes

2008-12-22

The Confederated Salish and Kootenai Tribes (CSKT) and Montana Fish Wildlife and Parks (MFWP) wrote the 'Fisheries Mitigation Plan for Losses Attributable to the Construction and Operation of Hungry Horse Dam' in March 1991 to define the fisheries losses, mitigation alternatives and recommendations to protect, mitigate and enhance resident fish and aquatic habitat affected by Hungry Horse Dam. On November 12, 1991, the Northwest Power Planning Council (NPPC) approved the mitigation plan with minor modifications, called for a detailed implementation plan, and amended measures 903(h)(1) through (7). A long-term mitigation plan was submitted in August 1992, was approved by the Council in 1993, and the first contract for this project was signed on November 11, 1993. The problem this project addresses is the loss of habitat, both in quality and quantity, in the Flathead Lake and River basin resulting from the construction and operation of Hungry Horse Dam. The purpose of the project is to both implement mitigation measures and monitor the biological responses to those measures including those implemented by Project Numbers 9101903 and 9101904. Goals and objectives of the 1994 Fish and Wildlife Program (Section 10.1) addressed by this project are the rebuilding to sustainable levels weak, but recoverable, native populations injured by the hydropower system. The project mitigates the blockage of spawning runs by Hungry Horse Dam by restoring and even creating spawning habitats within direct drainages to Flathead Lake. The project also addresses the altered habitat within Flathead Lake resulting from species shifts and consequent dominance of new species that restricts the potential success of mitigation measures. Specific goals of this project are to create and restore habitat and quantitatively monitor changes in fish populations to verify the efficacy of our mitigation measures. The project consists of three components: monitoring, restoration and research

Evaluating the effectiveness of flood damage mitigation measures by the application of Propensity Score Matching

NARCIS (Netherlands)

Hudson, P.G.M.B.; Botzen, W.J.W.; Kreibich, H.; Bubeck, P.; Aerts, J.C.J.H.

2014-01-01

The employment of damage mitigation measures (DMMs) by individuals is an important component of integrated flood risk management. In order to promote efficient damage mitigation measures, accurate estimates of their damage mitigation potential are required. That is, for correctly assessing the

Albeni Falls wildlife mitigation project: annual report of mitigation activities

International Nuclear Information System (INIS)

Terra-Burns, Mary

2002-01-01

The Albeni Falls Interagency Work Group was actively engaged in implementing wildlife mitigation activities in 2001. The Work Group met quarterly to discuss management and budget issues affecting the Albeni Falls Wildlife Mitigation Program. Work Group members protected 851 acres of wetland habitat in 2001. Wildlife habitat protected to date for the Albeni Falls project is approximately 5,248.31 acres (∼4,037.48 Habitat Units). Approximately 14% of the total wildlife habitat lost has been mitigated. Administrative activities increased as funding was more evenly distributed among Work Group members and protection opportunities became more time consuming. In 2001, Work Group members focused on development and implementation of the monitoring and evaluation program as well as completion of site-specific management plans. With the implementation of the monitoring and evaluation program, and as management plans are reviewed and executed, on the ground management activities are expected to increase in 2002

Griffon vulture mortality at wind farms in southern Spain: Distribution of fatalities and active mitigation measures

OpenAIRE

Lucas, Manuela de; Ferrer, Miguel; Bechard, Mark J.; Muñoz, Antonio R.

2012-01-01

Wind is increasingly being used as a renewable energy source around the world. Avian mortality is one of the negative impacts of wind energy and a new technique that reduces avian collision rates is necessary. Using the most frequently-killed species, the griffon vulture (Gyps fulvus), we studied its mortality at 13 wind farms in Tarifa, Cadiz, Spain, before (2006-2007) and after (2008-2009) when selective turbine stopping programs were implemented as a mitigation measure. Ten wind farms (tot...

Recent advances in measurement and dietary mitigation of enteric methane emissions in ruminants

Directory of Open Access Journals (Sweden)

Amlan Kumar Patra

2016-05-01

Full Text Available Methane (CH4 emission, which is mainly produced during normal fermentation of feeds by the rumen microorganisms, represents a major contributor to the greenhouse gas (GHG emissions. Several enteric CH4 mitigation technologies have been explored recently. A number of new techniques have also been developed and existing techniques have been improved in order to evaluate CH4 mitigation technologies and prepare an inventory of GHG emissions precisely. The aim of this review is to discuss different CH4 measuring and mitigation technologies, which have been recently developed. Respiration chamber technique is still considered as a gold standard technique due to its greater precision and reproducibility in CH4 measurements. With the adoption of recent recommendations for improving the technique, the SF6 method can be used with a high level of precision similar to the chamber technique. Short-term measurement techniques of CH4 measurements generally invite considerable within- and between animal variations. Among the short-term measuring techniques, Greenfeed and methane hood systems are likely more suitable for evaluation of CH4 mitigation studies, if measurements could be obtained at different times of the day relative to the diurnal cycle of the CH4 production. Carbon dioxide and CH4 ratio, sniffer and other short-term breath analysis techniques are more suitable for on farm screening of large number of animals to generate the data of low CH4 producing animals for genetic selection purposes. Different indirect measuring techniques are also investigated in recent years. Several new dietary CH4 mitigation technologies have been explored, but only a few of them are practical and cost-effective. Future research should be directed towards both the medium- and long-term mitigation strategies, which could be utilized on farms to accomplish substantial reductions of CH4 emissions and to profitably reduce carbon footprint of livestock production systems. This

Recent Advances in Measurement and Dietary Mitigation of Enteric Methane Emissions in Ruminants.

Science.gov (United States)

Patra, Amlan K

2016-01-01

Methane (CH4) emission, which is mainly produced during normal fermentation of feeds by the rumen microorganisms, represents a major contributor to the greenhouse gas (GHG) emissions. Several enteric CH4 mitigation technologies have been explored recently. A number of new techniques have also been developed and existing techniques have been improved in order to evaluate CH4 mitigation technologies and prepare an inventory of GHG emissions precisely. The aim of this review is to discuss different CH4 measuring and mitigation technologies, which have been recently developed. Respiration chamber technique is still considered as a gold standard technique due to its greater precision and reproducibility in CH4 measurements. With the adoption of recent recommendations for improving the technique, the SF6 method can be used with a high level of precision similar to the chamber technique. Short-term measurement techniques of CH4 measurements generally invite considerable within- and between-animal variations. Among the short-term measuring techniques, Greenfeed and methane hood systems are likely more suitable for evaluation of CH4 mitigation studies, if measurements could be obtained at different times of the day relative to the diurnal cycle of the CH4 production. Carbon dioxide and CH4 ratio, sniffer, and other short-term breath analysis techniques are more suitable for on farm screening of large number of animals to generate the data of low CH4-producing animals for genetic selection purposes. Different indirect measuring techniques are also investigated in recent years. Several new dietary CH4 mitigation technologies have been explored, but only a few of them are practical and cost-effective. Future research should be directed toward both the medium- and long-term mitigation strategies, which could be utilized on farms to accomplish substantial reductions of CH4 emissions and to profitably reduce carbon footprint of livestock production systems. This review presents

INTEGRATED FRAMEWORK FOR ENHANCING EARTHQUAKE RISK MITIGATION DECISIONS

Directory of Open Access Journals (Sweden)

Temitope Egbelakin

2015-12-01

Full Text Available The increasing scale of losses from earthquake disasters has reinforced the need for property owners to become proactive in seismic risk reduction programs. However, despite advancement in seismic design methods and legislative frameworks, building owners are found unwilling or lack motivation to adopt adequate mitigation measures that will reduce their vulnerability to earthquake disasters. Various theories and empirical findings have been used to explain the adoption of protective behaviours including seismic mitigation decisions, but their application has been inadequate to enhance building owners’ protective decisions. A holistic framework that incorporates the motivational orientations of decision-making, coupled with the social, cultural, economic, regulatory, institutional and political realms of earthquake risk mitigation to enhance building owners’ decisions to voluntarily implement adequate mitigation measures, is proposed. This framework attempts to address any multi-disciplinary barriers that exist in earthquake disaster management, by ensuring that stakeholders involved in seismic mitigation decisions work together to foster seismic rehabilitation of EPBs, as well as illuminate strategies that will initiate, promote and sustain the adoption of long-term earthquake mitigation. .

Guidance on the implementation of modifications to mitigate beyond design basis accidents

Energy Technology Data Exchange (ETDEWEB)

Harris, S.; Marczak, J.; O' Neill, M. [Ontario Power Generation, Pickering, ON (Canada)

2014-07-01

Following the events at Fukushima, Canadian Nuclear Power Plants (NPP) procured equipment and initiated modifications to improve response capability for Beyond Design Basis Accidents (BDBA). These changes were not typical of other design modifications to the nuclear power plants and reinforced the need for additional guidance for modifications to address BDBA. This paper describes the guidance that was developed to guide the design, procurement, installation, operation, and maintenance of equipment and modifications to mitigate BDBAs. The guidance developed prescribes a graded approach based on a categorization of the nature of the modification. Four categories of modifications are introduced, with the distinction being the degree of interface with existing design basis systems, structures and components (SSCs). This has resulted in a cost-effective means of implementing additional capability to mitigate BDBA conditions, and yet ensure the design basis capability of SSCs is maintained. Operating experience with use of the guidance is also discussed. (author)

Guidance on the implementation of modifications to mitigate beyond design basis accidents

International Nuclear Information System (INIS)

Harris, S.; Marczak, J.; O'Neill, M.

2014-01-01

Following the events at Fukushima, Canadian Nuclear Power Plants (NPP) procured equipment and initiated modifications to improve response capability for Beyond Design Basis Accidents (BDBA). These changes were not typical of other design modifications to the nuclear power plants and reinforced the need for additional guidance for modifications to address BDBA. This paper describes the guidance that was developed to guide the design, procurement, installation, operation, and maintenance of equipment and modifications to mitigate BDBAs. The guidance developed prescribes a graded approach based on a categorization of the nature of the modification. Four categories of modifications are introduced, with the distinction being the degree of interface with existing design basis systems, structures and components (SSCs). This has resulted in a cost-effective means of implementing additional capability to mitigate BDBA conditions, and yet ensure the design basis capability of SSCs is maintained. Operating experience with use of the guidance is also discussed. (author)

Simulation studies on measures to mitigate ion clouds

Energy Technology Data Exchange (ETDEWEB)

Babu Ganta, Prasanth; Masood, Ahmed; Rienen, Ursula van [Universitaet Rostock, Institut fuer Allgemeine Elektrotechnik (Germany); Sauerland, Dennis; Hillert, Wolfgang [Physikalisches Institut der Universitaet Bonn, ELSA (Germany); Meseck, Atoosa [HZB, Institut Beschleunigerphysik, Berlin (Germany)

2016-07-01

For future Energy Recovery Linacs (ERL), parasitic ions, which are generated by collisions of the beam and the rest gas in the vacuum chamber, present a limiting factor for the high current-low emittance electron beams. Clearing gaps, clearing electrodes and appropriate filling patterns are a remedy to keep the ion density in the accelerator at a level that allows for a minimum stability of the beam parameters. The MOEVE PIC Tracking code, which employs a 2D wake matrix, enables tracking simulations of the ion distribution over a relatively long period of up to thousands of interactions with the passing bunches. It enables to develop a deeper understanding of the ion-cloud behavior in order to design appropriate measures for their mitigation. For certain cases, it is sufficient to study the problem in 2D. Therefore, an additional 2D solver shall be implemented into MOEVE PIC Tracking in order to reduce the computation times. Numerical studies of ion cloud dynamics in beam guiding magnets and drift sections of electron machines will be shown and compared with experimental results obtained at the ELSA facility.

Implementation of a Noise Mitigation Strategy for a High-Pressure Xenon Detector

International Nuclear Information System (INIS)

Seifert, Allen; Milbrath, Brian D.; Pitts, W. K.; Smith, Leon E.

2005-01-01

High-pressure xenon (HPXe) detectors have historically been unable to achieve or even approach the theoretically predicted energy resolution, a phenomenon usually attributed to problems with microphonic, vibrational, or acoustic noise. All these noises are expected to have characteristic frequency signatures. We have determined the effects of external acoustic noise signals on the resolution of HPXe spectrometers and implemented a technique to reduce or eliminate the resolution loss caused by external acoustic noise in real time. Using a precision waveform generator as the driver on a 400-watt speaker, we determined the response of a commercial HPXe detector to a variety of constant frequency acoustic noise signals by performing a fast Fourier transform on a buffered detector output signal and noting distortions to the spectral response of the frequency domain. A data acquisition package was developed using the frequency response information to perform real time digital signal noise filtering on each gamma-ray pulse. With external acoustic noise, the measured resolution of HPXe gamma-ray energy spectra was degraded by a factor of 2 to 3. With the noise mitigating data acquisition package the spectroscopic resolution was restored to values comparable to the resolution measured under ideal (non-noisy) conditions

Fluor Daniel Hanford implementation plan for DOE Order 5480.28. Natural phenomena hazards mitigation

International Nuclear Information System (INIS)

Conrads, T.J.

1997-01-01

Natural phenomena hazards (NPH) are unexpected acts of nature that pose a threat or danger to workers, the public, or the environment. Earthquakes, extreme winds (hurricane and tornado), snow, flooding, volcanic ashfall, and lightning strikes are examples of NPH that could occur at the Hanford Site. U.S. Department of Energy (DOE) policy requires facilities to be designed, constructed, and operated in a manner that protects workers, the public, and the environment from hazards caused by natural phenomena. DOE Order 5480.28, Natural Phenomena Hazards Mitigation, includes rigorous new natural phenomena criteria for the design of new DOE facilities, as well as for the evaluation and, if necessary, upgrade of existing DOE facilities. The Order was transmitted to Westinghouse Hanford Company in 1993 for compliance and is also identified in the Project Hanford Management Contract, Section J, Appendix C. Criteria and requirements of DOE Order 5480.28 are included in five standards, the last of which, DOE-STD-1023, was released in fiscal year 1996. Because the Order was released before all of its required standards were released, enforcement of the Order was waived pending release of the last standard and determination of an in-force date by DOE Richland Operations Office (DOE-RL). Agreement also was reached between the Management and Operations Contractor and DOE-RL that the Order would become enforceable for new structures, systems, and components (SSCS) 60 days following issue of a new order-based design criteria in HNF-PRO-97, Engineering Design and Evaluation. The order also requires that commitments addressing existing SSCs be included in an implementation plan that is to be issued 1 year following the release of the last standard. Subsequently, WHC-SP-1175, Westinghouse Hanford Company Implementation Plan for DOE Order 5480.28, Natural Phenomena Hazards Mitigation, Rev. 0, was issued in November 1996, and this document, HNF-SP-1175, Fluor Daniel Hanford

Essential severe accident mitigation measures for operating and future PWR's

Energy Technology Data Exchange (ETDEWEB)

Bittermann, Dietmar; Eckardt, Bernd A.; Lechleuthner, Michael [Framatome ANP GmbH, Erlangen (Germany)

2003-04-01

Severe Accident mitigation measures are a constituent of the safety concept in Europe not only for operating but also for future light water reactors. While operating reactors mainly have been backfitted with such measure, for future reactors Severe Accident mitigation measures already have to be considered in the design phase. Severe Accident measures are considered as the 4{sup th} level of defense for future reactors. This difference has consequences also on the kind of measures proposed to be introduced. While in operating plants Severe Accident mitigation measures are considered for further risk reduction, in future reactors an explicit higher level of safety is required resulting in additional design measures. This higher safety level is expressed in the requirement that there must be no need for evacuation of surrounding populations except in the immediate vicinity of the plant and for long-term restrictions with regard to the consumption of locally grown food. Because of the potential hazard posed by radioactive releases to the environment in the event of an Severe Accident situation depends largely on the airborne material in the containment atmosphere and on the containment integrity, new system features to prevent loss of containment integrity have been introduced in the design of the NPP's. For these tasks it has been necessary to develop and qualify new system technologies and implement them finally into NPP's, e.g. like systems for containment atmosphere H{sub 2}-control, filtered venting, core retention devices and atmosphere sampling. The following systems are introduced for operating as well as for future plants: {center_dot} The Hydrogen Control System is based on the Passive Autocatalytic Recombiner (PAR) technology. There is no need for any operator actions because of the self-starting feature of the catalyst if hydrogen is released. {center_dot} In situ Post Accident Sampling System (In situ-PASS) are introduced for the purpose of

Investigation of radon entry and effectiveness of mitigation measures in seven houses in New Jersey: Midproject report

Energy Technology Data Exchange (ETDEWEB)

Matthews, T.G.; Dudney, C.S.; Monar, K.P.; Landguth, D.C.; Wilson, D.L.; Hawthorne, A.R.; Hubbard, L.M.; Gadsby, K.J.; Bohac, D.L.; Decker, C.A.

1987-12-01

A detailed radon mitigation study is in progress in 14 homes in the New Jersey Piedmont area. The principal goals are the refinement of diagnostic measurements for selection and implementation of mitigation systems, and the reduction of radon concentrations to acceptable levels inside the study houses. Monitoring stations were installed in each home in October, 1986. Instrumented measurements included: basement and upstairs radon; differential pressures across the basement/subslag, basement/upstairs and basement/outdoor interfaces; temperatures at basement, upstairs and outdoor locations; and central air handler usage. A weather station was located at one house, monitoring wind speed and direction; barometric pressure; precipitation; soil temperature; and outdoor temperature and relative humidity. A time-averaged value of all of the above parameters was recorded every 30 min. Several additional parameters were monitored on an intermittent basis in all or selected homes. These include multizone air infiltration rates which have been measured in all homes using passive perfluorocarbon tracers (PFT) and in two homes using a constant concentration tracer gas system (CCTG). Total radon progeny, soil gas radon concentration and permeability characteristics, and gamma radiation levels were also monitored periodically in all study homes. 10 refs., 53 figs.

Investigation of radon entry and effectiveness of mitigation measures in seven houses in New Jersey: Midproject report

International Nuclear Information System (INIS)

Matthews, T.G.; Dudney, C.S.; Monar, K.P.

1987-12-01

A detailed radon mitigation study is in progress in 14 homes in the New Jersey Piedmont area. The principal goals are the refinement of diagnostic measurements for selection and implementation of mitigation systems, and the reduction of radon concentrations to acceptable levels inside the study houses. Monitoring stations were installed in each home in October, 1986. Instrumented measurements included: basement and upstairs radon; differential pressures across the basement/subslag, basement/upstairs and basement/outdoor interfaces; temperatures at basement, upstairs and outdoor locations; and central air handler usage. A weather station was located at one house, monitoring wind speed and direction; barometric pressure; precipitation; soil temperature; and outdoor temperature and relative humidity. A time-averaged value of all of the above parameters was recorded every 30 min. Several additional parameters were monitored on an intermittent basis in all or selected homes. These include multizone air infiltration rates which have been measured in all homes using passive perfluorocarbon tracers (PFT) and in two homes using a constant concentration tracer gas system (CCTG). Total radon progeny, soil gas radon concentration and permeability characteristics, and gamma radiation levels were also monitored periodically in all study homes. 10 refs., 53 figs

Implementation of a pollution control projects as a mitigating measure for the environmental impacts in UN-RIO production platforms; Implementacao de um projeto de controle da poluicao como medida mitigadora de impactos ambientais em plataformas de producao da UN-RIO

Energy Technology Data Exchange (ETDEWEB)

Coelho, Ana Paula A.; Machado, Mariana E.R.; Rocha, Valmir G. da [PETROBRAS, Rio de Janeiro, RJ (Brazil). Unidade de Negocio de Exploracao e Producao

2004-07-01

The activity of offshore oil and gas exploration and production (E and P) has the potential to cause environmental impacts, mainly due to the nature of the products involved. Therefore, it is of fundamental importance that all possible impacts derived from this activity be identified so that mitigating measures can be taken. The work described here proposes, as a mitigating measure for some of the more relevant environmental impacts related to the offshore E and P activity, the implementation of a Pollution Control Project at UN-RIO's oil and gas platforms. The Project includes actions for the adequate environmental management of the atmospheric emissions, effluents and solid residues generated during oil and gas production activities. The Project also proposes actions related to the monitoring of relevant parameters during the operations, the elaboration of operational procedures for the pollution control systems and equipment, a preventive equipment maintenance policy and the training in standard procedures for critical activities. Therefore, the implementation of such a Project is intrinsically related to the maintenance of the environmental quality in the area where UN-RIO's E and P activities take place. (author)

Navy radon assessment and mitigation program: Final report

International Nuclear Information System (INIS)

1994-10-01

This final report encompasses the events from the beginning of the Navy Radon Assessment and Mitigation Program to the closure of the program on October 31, 1994. Included in the report are discussions of the phases of the program including screening, assessment, mitigation, and post-mitigation. The primary discussion involves screening and assessment. The report addresses recommendations made to the Naval Facilities Engineering Command by the Hazardous Waste Remedial Actions Program of Martin Marietta Energy Systems, Inc., and the final decisions that were made. Special emphasis is placed on quality assurance/quality control (QA/QC), since QA/QC was given top priority during the implementation of this program. Included in the discussion on QA/QC are ana overview of the measurement process, positive and negative controls, replicated measurements, and application of chamber exposures to data calibration. The report concludes with a discussion of testing considerations for naval facilities and radon mitigation considerations for the Department of the Navy

CONTRACTUAL RISKS IN THE NEW ZEALAND CONSTRUCTION INDUSTRY: ANALYSIS AND MITIGATION MEASURES

Directory of Open Access Journals (Sweden)

Jasper Mbachu

2014-12-01

Full Text Available While tendering for jobs, a contractor is expected to analyse the various risks in each prospective project and price them appropriately. Contingencies are included in the tender price to cater for the various risks based on their impacts on the project targets and profit margin. Currently in New Zealand (NZ, there is little or no information on the various contractual risks and their mitigation measures. This has led to contractors over compensating or under compensating for risks with costly consequences. This study aimed to establish priority contractual risks in the NZ construction industry, and their mitigation measures. The research was based on a questionnaire survey of consultants and contractors. Descriptive statistics and multi-attribute techniques were used in the data analysis. Results showed 21 risk factors which were segregated into 6 broad categories in diminishing levels of significance as follows: Site conditions, main contractor, pricing, subcontractor, external and client- related risks. Putting tags and conditions to risky price items in the tender bids, and transferring the risks onto other parties were analysed as the 2 most effective out of the 5 key risk mitigation measures identified. Being cautious of the priority risks and application of the identified effective risk mitigation measures could guide contractors and the project team to more appropriately budget for and respond to risks, thereby ensuring more satisfactory project outcomes.

Modelling farm vulnerability to flooding: A step toward vulnerability mitigation policies appraisal

Science.gov (United States)

Brémond, P.; Abrami, G.; Blanc, C.; Grelot, F.

2009-04-01

Recent catastrophic flood events such as Elbe in 2002 or Rhône in 2003 have shown limits of flood management policies relying on dykes protection: worsening of flood impacts downstream, increased damage by dykes rupture. Those events, among others, contributes to radical changes on the philosophy of flood prevention, with the promotion of new orientations for mitigating flood exposition. Two new trends may have a significant impact on rural areas: floodplain restoration and vulnerability mitigation. The Rhône River program, which is an contract of objectives signed between French Government and local collectivites, is highly illustrative of these new trends and their impact on agricultural sector. In this program, it appears that areas to be concerned by floodplain restoration are agricultural ones, because their supposed vulnerability to flood is expected to be less important to urban areas. As a consequence, agricultural sector is particularly concerned by planned actions on mitigation of assets vulnerability, an important part of the program (financial support of European Union of 7.5 Million euros). Mitigation of agricultural assets vulnerability reveals particularly interesting for two following reasons. Firstly, it is a way to maintain agricultural activities in floodplains yet existing, without promoting flood protection. Secondly, in case of floodplain restoration, vulnerability mitigation is a way for local authorities to compensate over-flooding impacts. In practice, local authorities may financially support farmers for implementing measures to mitigate their farm vulnerability. On the Rhône River, an important work has already been done to identify farm vulnerability to flooding, and propose measures to mitigate it. More than 3 000 farms exposed to flood risk have been identified representing 88 690 ha of agricultural areas which is estimated to generate damage between 400 and 800 Million euros depending on the season of occurrence for a catastrophic

Assessment of mitigation pathways of GHG emissions from the Korean waste sector through 2050

Directory of Open Access Journals (Sweden)

Yongjoo Chung

2018-05-01

Full Text Available The waste sector may play a significant role in national mitigation policies with further greenhouse gas (GHG reduction opportunities mainly because of its linkage to other sectors. However, the waste sector has not drawn much attention from research community mainly because the amount of GHG emissions from the waste sector is notably smaller than other sectors. This study presents emissions estimation and mitigation potentials of the waste sector in Korea. Emission estimates and business-as-usual emissions through 2050 are estimated based on four different treatment methods, including landfill, incineration, wastewater, and biological treatment by considering country-specific emission parameters of wastes, where available. Different types of wastes for each treatment method are investigated to obtain accurate emission estimates. It is expected that GHG emissions in 2050 are about 12.0 Tg CO2eq, which is 17% less than those in 2010. Mitigation potentials and economic impacts of five different measures are also investigated, and it is revealed that the production of refuse drive fuel from combustible municipal solid wastes may render the greatest benefit with the most mitigation potential of 649 kt CO2eq. An interdependent nature among mitigation measures is further discussed and it is shown that, if implemented together, the accumulated mitigation potentials are far less than the simple sum of individual potentials. It is implied that an aggregate potential of individual measures needs to be examined when implementing several mitigation measures simultaneously. This study outlines how to investigate emissions estimation and mitigation pathways for the waste sector in a national level. Keywords: Greenhouse gas, Emissions estimation, Waste treatment, Mitigation potential, Marginal abatement cost

Innovations in optimizing mitigation and pipeline risk management for natural gas and hazardous liquid systems

Energy Technology Data Exchange (ETDEWEB)

Gloven, Michael P; Hendren, Elaine S; Zeller, Sherri A; Ramirez, Pete V [Bass-Trigon (United States)

2003-07-01

Pipeline risk management has been stimulated by pipeline ruptures throughout the world. This paper explores risk management and mitigation strategies for minimizing consequences from pipeline releases, and optimizing financial resources in response or in prevention of these events. More specifically, it examines private sector innovations which optimize mitigation activities in combination with public sector programs such as regulations and standards (i.e., ASME B31.S, API 1160). The mitigation of risk involves the implementation of measures to reduce the frequency of failure, the severity of consequences, or both these attributes of risk. A wide variety of risk mitigation measures are available to pipeline operators. Given the diversity of mitigation measures available, this paper proposes a framework that can assist operating companies in selecting risk mitigation strategies based on risk results, mitigation costs and benefits. (author)

Structural master plan of flood mitigation measures

Directory of Open Access Journals (Sweden)

A. Heidari

2009-01-01

Full Text Available Flood protection is one of the practical methods in damage reduction. Although it not possible to be completely protected from flood disaster but major part of damages can be reduced by mitigation plans. In this paper, the optimum flood mitigation master plan is determined by economic evaluation in trading off between the construction costs and expected value of damage reduction as the benefits. Size of the certain mitigation alternative is also be obtained by risk analysis by accepting possibility of flood overtopping. Different flood mitigation alternatives are investigated from various aspects in the Dez and Karun river floodplain areas as a case study in south west of IRAN. The results show that detention dam and flood diversion are the best alternatives of flood mitigation methods as well as enforcing the flood control purpose of upstream multipurpose reservoirs. Dyke and levees are not mostly justifiable because of negative impact on down stream by enhancing routed flood peak discharge magnitude and flood damages as well.

44 CFR 201.4 - Standard State Mitigation Plans.

Science.gov (United States)

2010-10-01

... resources to reducing the effects of natural hazards. (b) Planning process. An effective planning process is... location of all natural hazards that can affect the State, including information on previous occurrences of... updating the plan. (ii) A system for monitoring implementation of mitigation measures and project closeouts...

Implementing nationally determined contributions: building energy policies in India’s mitigation strategy

Science.gov (United States)

Yu, Sha; Evans, Meredydd; Kyle, Page; Vu, Linh; Tan, Qing; Gupta, Ashu; Patel, Pralit

2018-03-01

The Nationally Determined Contributions are allowing countries to examine options for reducing emissions through a range of domestic policies. India, like many developing countries, has committed to reducing emissions through specific policies, including building energy codes. Here we assess the potential of these sectoral policies to help in achieving mitigation targets. Collectively, it is critically important to see the potential impact of such policies across developing countries in meeting national and global emission goals. Buildings accounted for around one third of global final energy use in 2010, and building energy consumption is expected to increase as income grows in developing countries. Using the Global Change Assessment Model, this study finds that implementing a range of energy efficiency policies robustly can reduce total Indian building energy use by 22% and lower total Indian carbon dioxide emissions by 9% in 2050 compared to the business-as-usual scenario. Among various policies, energy codes for new buildings can result in the most significant savings. For all building energy policies, well-coordinated, consistent implementation is critical, which requires coordination across different departments and agencies, improving capacity of stakeholders, and developing appropriate institutions to facilitate policy implementation.

Pollution Swapping in Agricultural Systems: deciding between mitigation measures with conflicting outcomes

Science.gov (United States)

Quinton, John; Stevens, Carly

2010-05-01

Pollution swapping occurs when a mitigation option introduced to reduce one pollutant results in an increase in a different pollutant. Although the concept of pollution swapping is widely understood it has received little attention in research and policy design. This study investigated diffuse pollution mitigation options applied in combinable crop systems. They are: cover crops, residue management, no-tillage, riparian buffer zones, contour grass strips and constructed wetlands. A wide range of water and atmospheric pollutants were considered, including nitrogen, phosphorus, carbon and sulphur. It is clear from this investigation that there is no single mitigation option that will reduce all pollutants and in this poster we consider how choices may be made between mitigation measures which may have a positive effect on one pollutant but a negative effect on another.

Space debris mitigation - engineering strategies

Science.gov (United States)

Taylor, E.; Hammond, M.

The problem of space debris pollution is acknowledged to be of growing concern by space agencies, leading to recent activities in the field of space debris mitigation. A review of the current (and near-future) mitigation guidelines, handbooks, standards and licensing procedures has identified a number of areas where further work is required. In order for space debris mitigation to be implemented in spacecraft manufacture and operation, the authors suggest that debris-related criteria need to become design parameters (following the same process as applied to reliability and radiation). To meet these parameters, spacecraft manufacturers and operators will need processes (supported by design tools and databases and implementation standards). A particular aspect of debris mitigation, as compared with conventional requirements (e.g. radiation and reliability) is the current and near-future national and international regulatory framework and associated liability aspects. A framework for these implementation standards is presented, in addition to results of in-house research and development on design tools and databases (including collision avoidance in GTO and SSTO and evaluation of failure criteria on composite and aluminium structures).

A numerical technique to design blast noise mitigation measures

NARCIS (Netherlands)

Berg, F. van den; Eerden, F.J.M. van der

2007-01-01

Large weapons, such as armor, artillery or demolitions, create a high-energy blast wave. It has a low frequency content, typically between 15 and 125 Hz, and can propagate over large distances. As a result it is a relative important cause for annoyance. Mitigation measures need to be close to the

Influenza A (H1N1-2009) pandemic in Singapore--public health control measures implemented and lessons learnt.

Science.gov (United States)

Tay, Joanne; Ng, Yeuk Fan; Cutter, Jeffery L; James, Lyn

2010-04-01

We describe the public health control measures implemented in Singapore to limit the spread of influenza A (H1N1-2009) and mitigate its social effects. We also discuss the key learning points from this experience. Singapore's public health control measures were broadly divided into 2 phases: containment and mitigation. Containment strategies included the triage of febrile patients at frontline healthcare settings, admission and isolation of confirmed cases, mandatory Quarantine Orders (QO) for close contacts, and temperature screening at border entry points. After sustained community transmission became established, containment shifted to mitigation. Hospitals only admitted H1N1-2009 cases based on clinical indications, not for isolation. Mild cases were managed in the community. Contact tracing and QOs tapered off, and border temperature screening ended. The 5 key lessons learnt were: (1) Be prepared, but retain flexibility in implementing control measures; (2) Surveillance, good scientific information and operational research can increase a system's ability to manage risk during a public health crisis; (3) Integrated systems-level responses are essential for a coherent public health response; (4) Effective handling of manpower surges requires creative strategies; and (5) Communication must be strategic, timely, concise and clear. Singapore's effective response to the H1N1-2009 pandemic, founded on experience in managing the 2003 SARS epidemic, was a whole-of-government approach towards pandemic preparedness planning. Documenting the measures taken and lessons learnt provides a learning opportunity for both doctors and policy makers, and can help fortify Singapore's ability to respond to future major disease outbreaks.

Structural master plan of flood mitigation measures

OpenAIRE

A. Heidari

2009-01-01

Flood protection is one of the practical methods in damage reduction. Although it not possible to be completely protected from flood disaster but major part of damages can be reduced by mitigation plans. In this paper, the optimum flood mitigation master plan is determined by economic evaluation in trading off between the construction costs and expected value of damage reduction as the benefits. Size of the certain mitigation alternative is also be obtained by risk analysis by accepting possi...

Multiple-pollutant cost-effectiveness of greenhouse gas mitigation measures in the UK agriculture

International Nuclear Information System (INIS)

Eory, Vera; Topp, Cairistiona F.E.; Moran, Dominic

2013-01-01

Highlights: ► Multiple-pollutant marginal abatement cost curves can inform integrated environmental policy. ► We incorporated the co-effects on NH 3 , NO 3 − , P and sediment, as monetary values, into the UK GHG MACC. ► Adding co-effects modifies the GHG MACC, though with little impact unless using high damage values. ► Further research is needed on the co-effects of GHG mitigation measures and on damage values. ► Analysis should focus on the co-effects of measures that are slightly above or below the threshold. -- Abstract: This paper develops multiple-pollutant marginal abatement cost curve analysis to identify an optimal set of greenhouse gas (GHG) mitigation measures considering the trade-offs and synergies with other environmental pollutants. The analysis is applied to UK agriculture, a sector expected to make a contribution to the national GHG mitigation effort. Previous analyses using marginal abatement cost curves (MACCs) have determined the sector's GHG abatement potential based on the cost-effectiveness of a variety of technically feasible mitigation measures. Most of these measures have external effects on other pollution loads arising from agricultural activities. Here the monetary values of four of the most important impacts to water and air (specifically ammonia, nitrate, phosphorous and sediment) are included in the cost-effectiveness analysis. The resulting multiple-pollutant marginal abatement cost curve (MP MACC) informs the design of sustainable climate change policies by showing how the MP MACC for the UK agriculture can differ from the GHG MACC. The analysis also highlights research gaps, and suggests a need to understand the wider environmental effects of GHG mitigation options and to reduce the uncertainty in pollutant damage cost estimates

Lessons learnt from a sectoral analysis of greenhouse gas mitigation potential in the Balkans

International Nuclear Information System (INIS)

Georgopoulou, E.; Mirasgedis, S.; Sarafidis, Y.; Gakis, N.; Hontou, V.; Lalas, D.P.; Steiner, D.; Tuerk, A.; Fruhmann, C.; Pucker, J.

2015-01-01

Balkan countries in the process of joining the European Union shall adopt greenhouse gas emissions reduction targets and implement appropriate mitigation policies and measures. This paper presents a simplified methodological framework based on marginal abatement cost curves for estimating the technical and economic mitigation potential at sectoral level (buildings and road transport) in selected Balkan countries. The results of the analysis provide to decision makers useful information regarding the availability of background data, the potential for setting ambitious mitigation targets, and detailed tools for assisting the selection of policies and measures to meet these targets. The analysis performed shows that a significant part of the greenhouse gas emissions abatement potential can be achieved through win–win measures. The incorporation of environmental externalities associated with these interventions, estimated through benefits transfer, further improves the economic performance of these measures, especially in the buildings sector. Moreover, the implementation of these measures is shown to result in positive macroeconomic effects through increases in GDP (gross domestic product) and creation of new jobs. Finally, the rebound effect may restrict the estimated greenhouse gas emission reductions in the buildings of the countries examined due to the low energy performance of the existing building stock. - Highlights: • Analysis of the technical and economic GHG mitigation potential in western Balkans. • Marginal abatement cost curves highlight several win–win interventions. • Incorporation of environmental benefits improves the performance of measures. • Mitigation measures result in significant positive macroeconomic effects. • The investment costs and the rebound effect may influence measures' effectiveness.

Construction and measurements of an improved vacuum-swing-adsorption radon-mitigation system

International Nuclear Information System (INIS)

Street, J.; Bunker, R.; Dunagan, C.; Loose, X.; Schnee, R. W.; Stark, M.; Sundarnath, K.; Tronstad, D.

2015-01-01

In order to reduce backgrounds from radon-daughter plate-out onto detector surfaces, an ultra-low-radon cleanroom is being commissioned at the South Dakota School of Mines and Technology. An improved vacuum-swing-adsorption radon mitigation system and cleanroom build upon a previous design implemented at Syracuse University that achieved radon levels of ∼0.2 Bq m −3 . This improved system will employ a better pump and larger carbon beds feeding a redesigned cleanroom with an internal HVAC unit and aged water for humidification. With the rebuilt (original) radon mitigation system, the new low-radon cleanroom has already achieved a > 300× reduction from an input activity of 58.6 ± 0.7 Bq m −3 to a cleanroom activity of 0.13 ± 0.06 Bq m −3

Construction and measurements of an improved vacuum-swing-adsorption radon-mitigation system

Science.gov (United States)

Street, J.; Bunker, R.; Dunagan, C.; Loose, X.; Schnee, R. W.; Stark, M.; Sundarnath, K.; Tronstad, D.

2015-08-01

In order to reduce backgrounds from radon-daughter plate-out onto detector surfaces, an ultra-low-radon cleanroom is being commissioned at the South Dakota School of Mines and Technology. An improved vacuum-swing-adsorption radon mitigation system and cleanroom build upon a previous design implemented at Syracuse University that achieved radon levels of ˜0.2 Bq m-3. This improved system will employ a better pump and larger carbon beds feeding a redesigned cleanroom with an internal HVAC unit and aged water for humidification. With the rebuilt (original) radon mitigation system, the new low-radon cleanroom has already achieved a > 300× reduction from an input activity of 58.6 ± 0.7 Bq m-3 to a cleanroom activity of 0.13 ± 0.06 Bq m-3.

A guide to understanding and implementing risk evaluation and mitigation strategies in organ transplantation.

Science.gov (United States)

Gabardi, Steven; Tichy, Eric M

2013-03-01

To review the components of the Congressional mandate for risk evaluation and mitigation strategies (REMS) managed by the Food and Drug Administration and assess their impact on health care providers practicing within the organ transplant arena. A non-date-limited search of MEDLINE and EMBASE (January 2007-June 2012) was conducted by using the following search terms: risk evaluation and mitigation strategies, REMS, and organ transplant, including a query of the individual organs. Information from the Federal Register and the Food and Drug Administration was also evaluated. REMS are strategies implemented to manage known or potential risks associated with medications and to ensure ongoing pharmacovigilance throughout the life of a pharmaceutical product. Elements of REMS programs may consist of 3 levels: a medication guide, communication plan, and elements to assure safe use. A medication guide is used to help prevent serious adverse events, aid in patients' decision making, and enhance medication adherence. Communication plans help educate health care providers and encourage adherence with REMS. The elements to assure safe use is a restrictive process implemented when it is deemed necessary to ensure safe access for patients to products with known serious risks. In transplant medicine, REMS currently exist for belatacept (medication guide and communication plan) and the mycophenolic acid derivatives (medication guide and elements to assure safe use). REMS are another step in the evolution of the development and marketing of pharmaceutical agents. Use of REMS in solid-organ transplant is becoming common. Transplant clinicians must provide required patient education and become involved with other aspects of REMS implementation to reduce the serious risks of pharmaceuticals and to improve patients' outcomes.

Modelled impacts of mitigation measures on greenhouse gas emissions from Finnish agriculture up to 2020

Directory of Open Access Journals (Sweden)

K. REGINA

2008-12-01

Full Text Available Emission scenarios based on integrated quantitative modelling are a valuable tool in planning strategies for greenhouse gas mitigation. By estimating the potential of individual mitigation measures to reduce greenhouse gas emissions, resources can be targeted to the most promising policy measures. This paper reports two agricultural emission scenarios for Finland up to year 2020, one baseline scenario (Scenario 1 based on the projected agricultural production levels determined by markets and agricultural policy and one with selected mitigation measures included (Scenario 2. Measures selected for the analysis consisted of 1 keeping agricultural area at the current level, 2 decreasing the proportion of organic soils, 3 increasing the proportion of grass cultivation on organic soils and 4 supporting biogas production on farms. Starting from 2005, the emissions of nitrous oxide and methane from agriculture would decrease 2.3% in Scenario 1 by 2020 whereas the respective decrease would be 11.5% in Scenario 2. According to the results, mitigation measures targeted to cultivation of organic soils have the largest potential to reduce the emissions. Such measures would include reducing the area of cultivated organic soils and increasing the proportion of perennial crops on the remaining area.

40 CFR 51.860 - Mitigation of air quality impacts.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 2 2010-07-01 2010-07-01 false Mitigation of air quality impacts. 51... Federal Actions to State or Federal Implementation Plans § 51.860 Mitigation of air quality impacts. Link... mitigate air quality impacts must be identified and the process for implementation and enforcement of such...

Mitigating Reptile Road Mortality: Fence Failures Compromise Ecopassage Effectiveness

Science.gov (United States)

Baxter-Gilbert, James H.; Riley, Julia L.; Lesbarrères, David; Litzgus, Jacqueline D.

2015-01-01

Roadways pose serious threats to animal populations. The installation of roadway mitigation measures is becoming increasingly common, yet studies that rigorously evaluate the effectiveness of these conservation tools remain rare. A highway expansion project in Ontario, Canada included exclusion fencing and ecopassages as mitigation measures designed to offset detrimental effects to one of the most imperial groups of vertebrates, reptiles. Taking a multispecies approach, we used a Before-After-Control-Impact study design to compare reptile abundance on the highway before and after mitigation at an Impact site and a Control site from 1 May to 31 August in 2012 and 2013. During this time, radio telemetry, wildlife cameras, and an automated PIT-tag reading system were used to monitor reptile movements and use of ecopassages. Additionally, a willingness to utilize experiment was conducted to quantify turtle behavioral responses to ecopassages. We found no difference in abundance of turtles on the road between the un-mitigated and mitigated highways, and an increase in the percentage of both snakes and turtles detected dead on the road post-mitigation, suggesting that the fencing was not effective. Although ecopassages were used by reptiles, the number of crossings through ecopassages was lower than road-surface crossings. Furthermore, turtle willingness to use ecopassages was lower than that reported in previous arena studies, suggesting that effectiveness of ecopassages may be compromised when alternative crossing options are available (e.g., through holes in exclusion structures). Our rigorous evaluation of reptile roadway mitigation demonstrated that when exclusion structures fail, the effectiveness of population connectivity structures is compromised. Our project emphasizes the need to design mitigation measures with the biology and behavior of the target species in mind, to implement mitigation designs in a rigorous fashion, and quantitatively evaluate road

Mitigating reptile road mortality: fence failures compromise ecopassage effectiveness.

Directory of Open Access Journals (Sweden)

James H Baxter-Gilbert

Full Text Available Roadways pose serious threats to animal populations. The installation of roadway mitigation measures is becoming increasingly common, yet studies that rigorously evaluate the effectiveness of these conservation tools remain rare. A highway expansion project in Ontario, Canada included exclusion fencing and ecopassages as mitigation measures designed to offset detrimental effects to one of the most imperial groups of vertebrates, reptiles. Taking a multispecies approach, we used a Before-After-Control-Impact study design to compare reptile abundance on the highway before and after mitigation at an Impact site and a Control site from 1 May to 31 August in 2012 and 2013. During this time, radio telemetry, wildlife cameras, and an automated PIT-tag reading system were used to monitor reptile movements and use of ecopassages. Additionally, a willingness to utilize experiment was conducted to quantify turtle behavioral responses to ecopassages. We found no difference in abundance of turtles on the road between the un-mitigated and mitigated highways, and an increase in the percentage of both snakes and turtles detected dead on the road post-mitigation, suggesting that the fencing was not effective. Although ecopassages were used by reptiles, the number of crossings through ecopassages was lower than road-surface crossings. Furthermore, turtle willingness to use ecopassages was lower than that reported in previous arena studies, suggesting that effectiveness of ecopassages may be compromised when alternative crossing options are available (e.g., through holes in exclusion structures. Our rigorous evaluation of reptile roadway mitigation demonstrated that when exclusion structures fail, the effectiveness of population connectivity structures is compromised. Our project emphasizes the need to design mitigation measures with the biology and behavior of the target species in mind, to implement mitigation designs in a rigorous fashion, and quantitatively

Community-based measures for mitigating the 2009 H1N1 pandemic in China.

Directory of Open Access Journals (Sweden)

Sanyi Tang

Full Text Available Since the emergence of influenza A/H1N1 pandemic virus in March-April 2009, very stringent interventions including Fengxiao were implemented to prevent importation of infected cases and decelerate the disease spread in mainland China. The extent to which these measures have been effective remains elusive. We sought to investigate the effectiveness of Fengxiao that may inform policy decisions on improving community-based interventions for management of on-going outbreaks in China, in particular during the Spring Festival in mid-February 2010 when nationwide traveling will be substantially increased. We obtained data on initial laboratory-confirmed cases of H1N1 in the province of Shaanxi and used Markov-chain Monte-Carlo (MCMC simulations to estimate the reproduction number. Given the estimates for the exposed and infectious periods of the novel H1N1 virus, we estimated a mean reproduction number of 1.68 (95% CI 1.45-1.92 and other A/H1N1 epidemiological parameters. Our results based on a spatially stratified population dynamical model show that the early implementation of Fengxiao can delay the epidemic peak significantly and prevent the disease spread to the general population but may also, if not implemented appropriately, cause more severe outbreak within universities/colleges, while late implementation of Fengxiao can achieve nothing more than no implementation. Strengthening local control strategies (quarantine and hygiene precaution is much more effective in mitigating outbreaks and inhibiting the successive waves than implementing Fengxiao. Either strong mobility or high transport-related transmission rate during the Spring Festival holiday will not reverse the ongoing outbreak, but both will result in a large new wave. The findings suggest that Fengxiao and travel precautions should not be relaxed unless strict measures of quarantine, isolation, and hygiene precaution practices are put in place. Integration and prompt implementation of

Implementation of secondary bacterial culture testing of platelets to mitigate residual risk of septic transfusion reactions.

Science.gov (United States)

Bloch, Evan M; Marshall, Christi E; Boyd, Joan S; Shifflett, Lisa; Tobian, Aaron A R; Gehrie, Eric A; Ness, Paul M

2018-04-01

Bacterial contamination of platelets remains a major transfusion-associated risk despite long-standing safety measures in the United States. We evaluated an approach using secondary bacterial culture (SBC) to contend with residual risk of bacterial contamination. Phased implementation of SBC was initiated in October 2016 for platelets (all apheresis collected) received at our institution from the blood donor center (Day 3 post collection). Platelet products were sampled aseptically (5 mL inoculated into an aerobic bottle [BacT/ALERT BPA, BioMerieux, Inc.]) by the blood bank staff upon receipt, using a sterile connection device and sampling kit. The platelet sample was inoculated into an aerobic blood culture bottle and incubated at 35°C for 3 days. The cost of SBC was calculated on the basis of consumables and labor costs at time of implementation. In the 13 months following implementation (October 6, 2016, to November 30, 2017), 23,044/24,653 (93.47%) platelet products underwent SBC. A total of eight positive cultures were detected (incidence 1 in 2881 platelet products), seven of which were positive within 24 hours of SBC. Coagulase negative Staphyloccus spp. were identified in four cases. Five of the eight cases were probable true positive (repeat reactive) and interdicted (cost per averted case was US$77,935). The remaining three cases were indeterminate. No septic transfusion reactions were reported during the observation period. We demonstrate the feasibility of SBC of apheresis platelets to mitigate bacterial risk. SBC is lower cost than alternative measures (e.g., pathogen reduction and point-of-release testing) and can be integrated into workflow at hospital transfusion services. © 2018 AABB.

How to mitigate impacts of wind farms on bats? A review of potential conservation measures in the European context

International Nuclear Information System (INIS)

Peste, Filipa; Paula, Anabela; Silva, Luís P. da; Bernardino, Joana; Pereira, Pedro; Mascarenhas, Miguel; Costa, Hugo; Vieira, José; Bastos, Carlos; Fonseca, Carlos; Pereira, Maria João Ramos

2015-01-01

Wind energy is growing worldwide as a source of power generation. Bat assemblages may be negatively affected by wind farms due to the fatality of a significant number of individuals after colliding with the moving turbines or experiencing barotrauma. The implementation of wind farms should follow standard procedures to prevent such negative impacts: avoid, reduce and offset, in what is known as the mitigation hierarchy. According to this approach avoiding impacts is the priority, followed by the minimisation of the identified impacts, and finally, when residual negative impacts still remain, those must be offset or at least compensated. This paper presents a review on conservation measures for bats and presents some guidelines within the compensation scenario, focusing on negative impacts that remain after avoidance and minimisation measures. The conservation strategies presented aim at the improvement of the ecological conditions for the bat assemblage as a whole. While developed under the European context, the proposed measures are potentially applicable elsewhere, taking into consideration the specificity of each region in terms of bat assemblages present, landscape features and policy context regarding nature and biodiversity conservation and management. An analysis of potential opportunities and constraints arising from the implementation of offset/compensation programmes and gaps in the current knowledge is also considered. - Highlights: • Wind energy impacts bat populations in ways not yet fully understood. • As the use of windfarms is growing worldwide greater impacts on bat populations are also expected. • Mitigation hierarchy provides a way to reduce impacts from new wind farm facilities. • Compensation measures may be used to reduce the residual effects on bat populations. • Identify bats ecological needs and compensate according to the existing surroundings

How to mitigate impacts of wind farms on bats? A review of potential conservation measures in the European context

Energy Technology Data Exchange (ETDEWEB)

Peste, Filipa, E-mail: filipapeste@gmail.com [Centre for Environmental and Marine Studies (CESAM) (Portugal); Department of Biology, University of Aveiro (Portugal); Paula, Anabela [Bioinsight - Ambiente e Biodiversidade, Lda. Lisboa (Portugal); Silva, Luís P. da [Centre for Environmental and Marine Studies (CESAM) (Portugal); Department of Biology, University of Aveiro (Portugal); MARE and CEF, Department of Life Sciences, University of Coimbra (Portugal); Bernardino, Joana; Pereira, Pedro [Bio3 - Estudos e Projectos em Biologia e Recursos Naturais, Lda. Almada (Portugal); Mascarenhas, Miguel [Bioinsight - Ambiente e Biodiversidade, Lda. Lisboa (Portugal); Costa, Hugo [Bio3 - Estudos e Projectos em Biologia e Recursos Naturais, Lda. Almada (Portugal); Vieira, José; Bastos, Carlos [Department of Electronics, Telecommunications and Informatics / IEETA, University of Aveiro (Portugal); Fonseca, Carlos [Centre for Environmental and Marine Studies (CESAM) (Portugal); Department of Biology, University of Aveiro (Portugal); Pereira, Maria João Ramos [Centre for Environmental and Marine Studies (CESAM) (Portugal); PPGBAN, Department of Zoology, Institute of Biosciences, Federal University of Rio Grande do Sul (Brazil); PPGEC, Federal University of Mato Grosso do Sul (Brazil)

2015-02-15

Wind energy is growing worldwide as a source of power generation. Bat assemblages may be negatively affected by wind farms due to the fatality of a significant number of individuals after colliding with the moving turbines or experiencing barotrauma. The implementation of wind farms should follow standard procedures to prevent such negative impacts: avoid, reduce and offset, in what is known as the mitigation hierarchy. According to this approach avoiding impacts is the priority, followed by the minimisation of the identified impacts, and finally, when residual negative impacts still remain, those must be offset or at least compensated. This paper presents a review on conservation measures for bats and presents some guidelines within the compensation scenario, focusing on negative impacts that remain after avoidance and minimisation measures. The conservation strategies presented aim at the improvement of the ecological conditions for the bat assemblage as a whole. While developed under the European context, the proposed measures are potentially applicable elsewhere, taking into consideration the specificity of each region in terms of bat assemblages present, landscape features and policy context regarding nature and biodiversity conservation and management. An analysis of potential opportunities and constraints arising from the implementation of offset/compensation programmes and gaps in the current knowledge is also considered. - Highlights: • Wind energy impacts bat populations in ways not yet fully understood. • As the use of windfarms is growing worldwide greater impacts on bat populations are also expected. • Mitigation hierarchy provides a way to reduce impacts from new wind farm facilities. • Compensation measures may be used to reduce the residual effects on bat populations. • Identify bats ecological needs and compensate according to the existing surroundings.

Strategies to mitigate nitrous oxide emissions from herbivore production systems.

Science.gov (United States)

Schils, R L M; Eriksen, J; Ledgard, S F; Vellinga, Th V; Kuikman, P J; Luo, J; Petersen, S O; Velthof, G L

2013-03-01

Herbivores are a significant source of nitrous oxide (N(2)O) emissions. They account for a large share of manure-related N(2)O emissions, as well as soil-related N(2)O emissions through the use of grazing land, and land for feed and forage production. It is widely acknowledged that mitigation measures are necessary to avoid an increase in N(2)O emissions while meeting the growing global food demand. The production and emissions of N(2)O are closely linked to the efficiency of nitrogen (N) transfer between the major components of a livestock system, that is, animal, manure, soil and crop. Therefore, mitigation options in this paper have been structured along these N pathways. Mitigation technologies involving diet-based intervention include lowering the CP content or increasing the condensed tannin content of the diet. Animal-related mitigation options also include breeding for improved N conversion and high animal productivity. The main soil-based mitigation measures include efficient use of fertilizer and manure, including the use of nitrification inhibitors. In pasture-based systems with animal housing facilities, reducing grazing time is an effective option to reduce N(2)O losses. Crop-based options comprise breeding efforts for increased N-use efficiency and the use of pastures with N(2)-fixing clover. It is important to recognize that all N(2)O mitigation options affect the N and carbon cycles of livestock systems. Therefore, care should be taken that reductions in N(2)O emissions are not offset by unwanted increases in ammonia, methane or carbon dioxide emissions. Despite the abundant availability of mitigation options, implementation in practice is still lagging. Actual implementation will only follow after increased awareness among farmers and greenhouse gases targeted policies. So far, reductions in N(2)O emissions that have been achieved are mostly a positive side effect of other N-targeted policies.

Nutrient pollution mitigation measures across Europe are resilient under future climate

Science.gov (United States)

Wade, Andrew; Skeffington, Richard; Couture, Raoul; Erlandsson, Martin; Groot, Simon; Halliday, Sarah; Harezlak, Valesca; Hejzlar, Joseph; Jackson-Blake, Leah; Lepistö, Ahti; Papastergiadou, Eva; Psaltopoulos, Demetrios; Riera, Joan; Rankinen, Katri; Skuras, Dimitris; Trolle, Dennis; Whitehead, Paul; Dunn, Sarah; Bucak, Tuba

2016-04-01

The key results from the application of catchment-scale biophysical models to assess the likely effectiveness of nutrient pollution mitigation measures set in the context of projected land management and climate change are presented. The assessment is based on the synthesis of modelled outputs of daily river flow, river and lake nitrogen and phosphorus concentrations, and lake chlorophyll-a, for baseline (1981-2010) and scenario (2031-2060) periods for nine study sites across Europe. Together the nine sites represent a sample of key climate and land management types. The robustness and uncertainty in the daily, seasonal and long-term modelled outputs was assessed prior to the scenario runs. Credible scenarios of land-management changes were provided by social scientists and economists familiar with each study site, whilst likely mitigation measures were derived from local stakeholder consultations and cost-effectiveness assessments. Modelled mitigation options were able to reduce nutrient concentrations, and there was no evidence here that they were less effective under future climate. With less certainty, mitigation options could affect the ecological status of waters at these sites in a positive manner, leading to improvement in Water Framework Directive status at some sites. However, modelled outcomes for sites in southern Europe highlighted that increased evaporation and decreased precipitation will cause much lower flows leading to adverse impacts of river and lake ecology. Uncertainties in the climate models, as represented by three GCM-RCM combinations, did not affect this overall picture much.

Effects of performance measure implementation on clinical manager and provider motivation.

Science.gov (United States)

Damschroder, Laura J; Robinson, Claire H; Francis, Joseph; Bentley, Douglas R; Krein, Sarah L; Rosland, Ann-Marie; Hofer, Timothy P; Kerr, Eve A

2014-12-01

Clinical performance measurement has been a key element of efforts to transform the Veterans Health Administration (VHA). However, there are a number of signs that current performance measurement systems used within and outside the VHA may be reaching the point of maximum benefit to care and in some settings, may be resulting in negative consequences to care, including overtreatment and diminished attention to patient needs and preferences. Our research group has been involved in a long-standing partnership with the office responsible for clinical performance measurement in the VHA to understand and develop potential strategies to mitigate the unintended consequences of measurement. Our aim was to understand how the implementation of diabetes performance measures (PMs) influences management actions and day-to-day clinical practice. This is a mixed methods study design based on quantitative administrative data to select study facilities and quantitative data from semi-structured interviews. Sixty-two network-level and facility-level executives, managers, front-line providers and staff participated in the study. Qualitative content analyses were guided by a team-based consensus approach using verbatim interview transcripts. A published interpretive motivation theory framework is used to describe potential contributions of local implementation strategies to unintended consequences of PMs. Implementation strategies used by management affect providers' response to PMs, which in turn potentially undermines provision of high-quality patient-centered care. These include: 1) feedback reports to providers that are dissociated from a realistic capability to address performance gaps; 2) evaluative criteria set by managers that are at odds with patient-centered care; and 3) pressure created by managers' narrow focus on gaps in PMs that is viewed as more punitive than motivating. Next steps include working with VHA leaders to develop and test implementation approaches to help

Restoration as mitigation: analysis of stream mitigation for coal mining impacts in southern Appalachia.

Science.gov (United States)

Palmer, Margaret A; Hondula, Kelly L

2014-09-16

Compensatory mitigation is commonly used to replace aquatic natural resources being lost or degraded but little is known about the success of stream mitigation. This article presents a synthesis of information about 434 stream mitigation projects from 117 permits for surface mining in Appalachia. Data from annual monitoring reports indicate that the ratio of lengths of stream impacted to lengths of stream mitigation projects were <1 for many projects, and most mitigation was implemented on perennial streams while most impacts were to ephemeral and intermittent streams. Regulatory requirements for assessing project outcome were minimal; visual assessments were the most common and 97% of the projects reported suboptimal or marginal habitat even after 5 years of monitoring. Less than a third of the projects provided biotic or chemical data; most of these were impaired with biotic indices below state standards and stream conductivity exceeding federal water quality criteria. Levels of selenium known to impair aquatic life were reported in 7 of the 11 projects that provided Se data. Overall, the data show that mitigation efforts being implemented in southern Appalachia for coal mining are not meeting the objectives of the Clean Water Act to replace lost or degraded streams ecosystems and their functions.

Vulnerability Factors and Effectiveness of Disaster Mitigation Measures in the Bangladesh Coast

Science.gov (United States)

Hossain, Md. Nazir; Paul, Shitangsu Kumar

2018-05-01

The major objective of this paper is to identify the vulnerability factors and examine the effectiveness of disaster mitigation measures undertaken by individuals, government and non-government organisations to mitigate the impacts of cyclones in the Bangladesh coast experiencing from Cyclone Aila. The primary data were collected from two villages of southwestern coastal areas of Bangladesh using questionnaire survey and interviews of the key informants. The data were analysed using the descriptive and inferential statistics. This paper reveals that the disaster management measures have a significant role to lessen the impacts of the cyclonic event, especially in pre-disaster preparedness, cyclone warning message dissemination, evacuation and post-disaster rehabilitation. The households, who have access to shelter, find weather forecast regularly and adopted pre-disaster awareness measures are relatively less susceptible to hazard's impacts. The disaster management measures undertaken by individuals and GOs and NGOs help coastal people to save their lives and property from the negative impacts of cyclones. The analysis shows that the NGOs' role is more effective and efficient than the GOs in cyclone disaster management. This paper identifies distance to shelter, participation in disaster training, efficient warning, etc. as the influential factors of vulnerability cyclones. The analysis finds the households as less affected who have adopted disaster preparedness measures. However, this paper concludes that the effective and proper disaster management and mitigation measures are very crucial to shield the lives and properties of the Bangladeshi coastal people.

Vulnerability Factors and Effectiveness of Disaster Mitigation Measures in the Bangladesh Coast

Science.gov (United States)

Hossain, Md. Nazir; Paul, Shitangsu Kumar

2018-01-01

The major objective of this paper is to identify the vulnerability factors and examine the effectiveness of disaster mitigation measures undertaken by individuals, government and non-government organisations to mitigate the impacts of cyclones in the Bangladesh coast experiencing from Cyclone Aila. The primary data were collected from two villages of southwestern coastal areas of Bangladesh using questionnaire survey and interviews of the key informants. The data were analysed using the descriptive and inferential statistics. This paper reveals that the disaster management measures have a significant role to lessen the impacts of the cyclonic event, especially in pre-disaster preparedness, cyclone warning message dissemination, evacuation and post-disaster rehabilitation. The households, who have access to shelter, find weather forecast regularly and adopted pre-disaster awareness measures are relatively less susceptible to hazard's impacts. The disaster management measures undertaken by individuals and GOs and NGOs help coastal people to save their lives and property from the negative impacts of cyclones. The analysis shows that the NGOs' role is more effective and efficient than the GOs in cyclone disaster management. This paper identifies distance to shelter, participation in disaster training, efficient warning, etc. as the influential factors of vulnerability cyclones. The analysis finds the households as less affected who have adopted disaster preparedness measures. However, this paper concludes that the effective and proper disaster management and mitigation measures are very crucial to shield the lives and properties of the Bangladeshi coastal people.

Construction and measurements of an improved vacuum-swing-adsorption radon-mitigation system

Energy Technology Data Exchange (ETDEWEB)

Street, J., E-mail: joseph.street@mines.sdsmt.edu; Bunker, R.; Dunagan, C.; Loose, X.; Schnee, R. W.; Stark, M.; Sundarnath, K.; Tronstad, D. [Department of Physics, South Dakota School of Mines & Technology, Rapid City, SD 57701 (United States)

2015-08-17

In order to reduce backgrounds from radon-daughter plate-out onto detector surfaces, an ultra-low-radon cleanroom is being commissioned at the South Dakota School of Mines and Technology. An improved vacuum-swing-adsorption radon mitigation system and cleanroom build upon a previous design implemented at Syracuse University that achieved radon levels of ∼0.2 Bq m{sup −3}. This improved system will employ a better pump and larger carbon beds feeding a redesigned cleanroom with an internal HVAC unit and aged water for humidification. With the rebuilt (original) radon mitigation system, the new low-radon cleanroom has already achieved a > 300× reduction from an input activity of 58.6 ± 0.7 Bq m{sup −3} to a cleanroom activity of 0.13 ± 0.06 Bq m{sup −3}.

Mitigation for the Construction and Operation of Libby Dam, 2000 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Hoffman, Greg; Marotz, Brian L.; Dunnigan, James (Montana Department of Fish, Wildlife and Parks, Libby, MT)

2002-09-01

''Mitigation for the Construction and Operation of Libby Dam'' is part of the Northwest Power Planning Council's resident fish and wildlife program. The program was mandated by the Northwest Planning Act of 1980, and is responsible for mitigating for damages to fish and wildlife caused by hydroelectric development in the Columbia River Basin. The objective of Phase I of the project (1983 through 1987) was to maintain or enhance the Libby Reservoir fishery by quantifying seasonal water levels and developing ecologically sound operational guidelines. The objective of Phase II of the project (1988 through 1996) was to determine the biological effects of reservoir operations combined with biotic changes associated with an aging reservoir. The objectives of Phase III of the project (1996 through present) are to implement habitat enhancement measures to mitigate for dam effects, to provide data for implementation of operational strategies that benefit resident fish, monitor reservoir and river conditions, and monitor mitigation projects for effectiveness.

Thailand's Low-Carbon Scenario 2050: The AIM/CGE analyses of CO2 mitigation measures

International Nuclear Information System (INIS)

Thepkhun, Panida; Limmeechokchai, Bundit; Fujimori, Shinichiro; Masui, Toshihiko; Shrestha, Ram M.

2013-01-01

Climate change and CO 2 mitigation have become increasingly important environmental issues. Recently Thailand has proposed policies on GHG mitigation such as Thailand’s Nationally Appropriate Mitigation Action (NAMA), which aims at GHG mitigation in the energy sector. This study used the computable general equilibrium (CGE) model, called “AIM/CGE” model, to analyse GHG mitigation measures under emission trading and carbon capture and storage (CCS) technology in Thailand. Results show that the international free emission trading policy can drive more GHG reduction by decreasing energy supply and demand, and increasing prices of emissions. The CCS technologies would balance emission reduction but they would reduce energy efficiency improvement and renewable energy utilization. In the energy security aspect, the policy options in this study would improve energy security, energy import dependency, and co-benefits of GHG mitigation in forms of improving local air quality. Results are also helpful to GHG mitigation policy in developing countries. -- Highlights: •A Computable General Equilibrium (CGE) model was used to analyze GHG mitigation policies in Thailand. •The CCS and emission trading will increase GHG mitigation in Thailand. •The 30% GHG mitigation target with 50% emission trading will give the best result in GDP. •The share of biomass resource and energy efficiency will decrease with CCS. •The emission trading will play an important role in decreasing fossil consumption and increasing renewable energy utilization

The determinants of private flood mitigation measures in Germany - evidence from a nationwide survey

OpenAIRE

Osberghaus, Daniel

2014-01-01

Public flood protection cannot totally eliminate the risk of flooding. Hence, private mitigation measures which proactively protect homes from being flooded or reduce flood damage are an essential part of modern flood risk management. This study analyses private flood mitigation measures among German households. The dataset covers more than 6000 households from all parts of the country, including flood plains as well as areas which are typically not at a high risk of riverine flooding. The re...

Fuel conservation and GHG (Greenhouse gas) emissions mitigation scenarios for China’s passenger vehicle fleet

International Nuclear Information System (INIS)

Hao, Han; Wang, Hewu; Ouyang, Minggao

2011-01-01

Passenger vehicles are the main consumers of gasoline in China. We established a bottom-up model which focuses on the simulation of energy consumptions and greenhouse gas (GHG) emissions growth by China’s passenger vehicle fleet. The fuel conservation and GHG emissions mitigation effects of five measures including constraining vehicle registration, reducing vehicle travel, strengthening fuel consumption rate (FCR) limits, vehicle downsizing and promoting electric vehicle (EV) penetration were evaluated. Based on the combination of these measures, the fuel conservation and GHG emissions mitigation scenarios for China’s passenger vehicle fleet were analyzed. Under reference scenario with no measures implemented, the fuel consumptions and life cycle GHG emissions will reach 520 million tons of oil equivalent (Mtoe) and 2.15 billion tons in 2050, about 8.1 times the level in 2010. However, substantial fuel conservation can be achieved by implementing the measures. By implementing all five measures together, the fuel consumption will reach 138 Mtoe in 2030 and decrease to 126 Mtoe in 2050, which is only 37.1% and 24.3% of the consumption under reference scenario. Similar potential lies in GHG mitigation. The results and scenarios provided references for the Chinese government’s policy-making. -- Highlights: ► We established a bottom-up model to simulate the fuel consumptions and GHG (Greenhouse gas) emissions growth by China’s passenger vehicle fleet. ► Five measures including constraining vehicle registration, reducing vehicle travel, improving fuel efficiency, vehicle downsizing and promoting EV penetration were evaluated. ► The fuel conservation and GHG emissions mitigation scenarios for China’s passenger vehicle fleet were provided as references for policy-making.

Integration of Regional Mitigation Assessment and Conservation Planning

Directory of Open Access Journals (Sweden)

James H. Thorne

2009-06-01

Full Text Available Government agencies that develop infrastructure such as roads, waterworks, and energy delivery often impact natural ecosystems, but they also have unique opportunities to contribute to the conservation of regional natural resources through compensatory mitigation. Infrastructure development requires a planning, funding, and implementation cycle that can frequently take a decade or longer, but biological mitigation is often planned and implemented late in this process, in a project-by-project piecemeal manner. By adopting early regional mitigation needs assessment and planning for habitat-level impacts from multiple infrastructure projects, agencies could secure time needed to proactively integrate these obligations into regional conservation objectives. Such practice can be financially and ecologically beneficial due to economies of scale, and because earlier mitigation implementation means potentially developable critical parcels may still be available for conservation. Here, we compare the integration of regional conservation designs, termed greenprints, with early multi-project mitigation assessment for two areas in California, USA. The expected spatial extent of habitat impacts and associated mitigation requirements from multiple projects were identified for each area. We used the reserve-selection algorithm MARXAN to identify a regional greenprint for each site and to seek mitigation solutions through parcel acquisition that would contribute to the greenprint, as well as meet agency obligations. The two areas differed in the amount of input data available, the types of conservation objectives identified, and local land-management capacity. They are representative of the range of conditions that conservation practitioners may encounter, so contrasting the two illustrates how regional advanced mitigation can be generalized for use in a wide variety of settings. Environmental organizations can benefit from this approach because it provides a

Hungry Horse Mitigation Plan; Fisheries Mitigation Plan for Losses Attributable to the Construction and Operation of Hungry Horse Dam, 1990-2003 Technical Report.

Energy Technology Data Exchange (ETDEWEB)

Fraley, John J.; Marotz, Brian L. (Montana Department of Fish, Wildlife and Parks, Helena, MT); DosSantos, Joseph M. (Confederated Salish and Kootenai Tribes of the Flathead Nation, Pablo, MT)

2003-04-01

In this document we present fisheries losses, mitigation alternatives, and recommendations to protect, mitigate, and enhance resident fish and aquatic habitat affected by the construction and operation of Hungry Horse Dam. This plan addresses six separate program measures in the 1987 Columbia Basin Fish and Wildlife Program. We designed the plan to be closely coordinated in terms of dam operations, funding, and activities with the Kerr Mitigation Plan presently before the Federal Energy Regulatory Commission. This document represents a mitigation plan for consideration by the Northwest Power Planning Council process; it is not an implementation plan. Flathead Lake is one of the cleanest lakes of its size in the world. The exceptional water quality and unique native fisheries make the Flathead Lake/River system extremely valuable to the economy and quality of life in the basin. The recreational fishery in Flathead Lake has an estimated value of nearly eight million dollars annually. This mitigation process represents our best opportunity to reduce the impacts of hydropower in this valuable aquatic system and increase angling opportunity. We based loss estimates and mitigation alternatives on an extensive data base, agency reports, nationally and internationally peer-reviewed scientific articles, and an innovative biological model for Hungry Horse Reservoir and the Flathead River. We conducted an extensive, 14-month scoping and consultation process with agency representatives, representatives of citizen groups, and the general public. This consultation process helped identify issues, areas of agreement, areas of conflict, and advantages and disadvantages of mitigation alternatives. The results of the scoping and consultation process helped shape our mitigation plan. Our recommended plan is based firmly on principles of adaptive management and recognition of biological uncertainty. After we receive direction from the NPPC, we will add more detailed hypotheses and

Brownfield redevelopment as a measure for climate changes mitigation

Directory of Open Access Journals (Sweden)

Cizler Jasna

2013-01-01

Full Text Available This paper explores brownfield renewal as a measure of sustainable land use. The aim was to highlight the brownfield redevelopment as a strategy for mitigation of negative effects of climate changes. Emphasis was put on innovative concepts in brownfield redevelopment, which involve land recycling, application of ecological and sustainable solutions. Main case studies are from Austria. Their analysis and evaluation show which concepts and strategies are used in successful redevelopment projects, and which strategies give the best results. This shows that brownfield renewal can have positive effects on regulation and mitigation of climate changes. Finally, guidelines for climate changes accountable and redevelopment will be derived. Research methodology is qualitative and combined, comprising of data analysis, case studies (field work, interviews with relevant actors, analysis of case studies and evaluation according to previously defined criteria, synthesis of results and generalisation and interpretation of results.

GHG emission mitigation measures and technologies in the Czech Republic

Energy Technology Data Exchange (ETDEWEB)

Tichy, M. [Energy Efficiency Center, Prague (Czech Republic)

1996-12-31

The paper presents a short overview of main results in two fields: projection of GHG emission from energy sector in the Czech Republic and assessment of technologies and options for GHG mitigation. The last part presents an overview of measures that were prepared for potential inclusion to the Czech Climate Change Action Plan.

Albeni Falls Wildlife Mitigation Project, 2008 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Soults, Scott [Kootenai Tribe of Idaho

2009-08-05

The Albeni Falls Interagency Work Group (AFIWG) was actively involved in implementing wildlife mitigation activities in late 2007, but due to internal conflicts, the AFIWG members has fractionated into a smaller group. Implementation of the monitoring and evaluation program continued across protected lands. As of 2008, The Albeni Falls Interagency Work Group (Work Group) is a coalition comprised of wildlife managers from three tribal entities (Kalispel Tribe, Kootenai Tribe, Coeur d Alene Tribe) and the US Army Corps of Engineers. The Work Group directs where wildlife mitigation implementation occurs in the Kootenai, Pend Oreille and Coeur d Alene subbasins. The Work Group is unique in the Columbia Basin. The Columbia Basin Fish and Wildlife Authority (CBFWA) wildlife managers in 1995, approved what was one of the first two project proposals to implement mitigation on a programmatic basis. The maintenance of this kind of approach through time has allowed the Work Group to implement an effective and responsive habitat protection program by reducing administrative costs associated with site-specific project proposals. The core mitigation entities maintain approximately 9,335 acres of wetland/riparian habitats in 2008.

Oldman River Dam wildlife habitat mitigation program, Pincher Creek, Alberta: Final report. Summary of the implementation phase, 1987--1993

International Nuclear Information System (INIS)

1998-01-01

This article summarizes the 1987--1993 implementation phase of the Oldman River Dam Wildlife Habitat Mitigation Program, intended to offset the negative impact of dam construction and operation on plant and animal species. Projects carried out during the program included creation of wetlands, tree and shrub planting, installation of snow and wildlife fences, and installation of replacement nesting sites for birds. Summaries are provided of the process that led to the final program design, the projects undertaken to complete the program, the design strategies, and the proposed habitat mitigation projects. Also included are an inventory of completed projects, an evaluation of the program's success in meeting its objectives and of the mitigation techniques used in the program, and a recommended strategy for future management of the program. Appendices include habitat suitability index models, summaries of related reports, vegetation maps, and a grazing management plan

Effects of policy measures implemented in Denmark on nitrogen pollution of the aquatic environment

DEFF Research Database (Denmark)

Kronvang, Brian; Andersen, Hans Estrup; Børgesen, Christen Duus

2008-01-01

Since 1985, seven national Action Plans (AP) have been implemented in Denmark to reduce nitrogen discharges from point sources and nitrogen losses from agriculture. The instruments applied include regulations on point source discharges from waste water treatment plants, area-related measures, e.g...... to delays in travel time in groundwater. Until now, the regulation has been performed on a national scale. A more regional or local approach is believed to be necessary in future to meet the demands of the EU Water Framework Directive......Since 1985, seven national Action Plans (AP) have been implemented in Denmark to reduce nitrogen discharges from point sources and nitrogen losses from agriculture. The instruments applied include regulations on point source discharges from waste water treatment plants, area-related measures, e...... indicators were defined: nitrogen discharges from point sources, nitrogen surplus in agriculture, nitrogen leaching from agricultural land and nitrogen concentrations and loads in surface waters. Since the introduction of mitigation programmes, discharges of nitrogen from point sources have been reduced...

Tourism and climate change: socioeconomic implications, mitigation and adaptation measures

Directory of Open Access Journals (Sweden)

Utsab Bhattarai

2015-06-01

Full Text Available The relationship between tourism and changing climate has been discussed and studied for a relatively long time in tourism research. Over the past 15 years, more focused studies have begun to appear, and especially recently, the issue of adaptation and mitigation has been emphasized as an urgent research need in tourism and climate change studies. This paper is based on the review of selected articles which discuss the several forms of tourism and climate change and provide recommendations for mitigation and adaptation measures. This review paper assesses the impacts of climate change on the popular forms of tourism such as; mountain tourism, wildlife tourism, adventure tourism, sun/sand tourism; last chance tourism, and describes the extent of tourism vulnerabilities and their implications. The paper concludes that the appropriate adaptation and mitigation measures have to be followed to minimize the risk of climate change while trying to save all forms of tourism. The initiative of this article is to present an overview of the existing literature on the relationship between tourism and climate change in order to establish the current state of corporate and institutional responses within the tourism industry and to set out an agenda for future research. The currency of the review is evident given the recent surge in popular discussion on climate change and its effects on tourism, and the appearance of a broad and disparate array of studies on this topic. DOI: http://dx.doi.org/10.3126/ije.v4i2.12664 International Journal of Environment Vol.4(2 2015: 355-373

Assessment of GHG mitigation technology measures in Ukraine

Energy Technology Data Exchange (ETDEWEB)

Raptsoun, N.; Parasiouk, N.

1996-12-31

In June 1992 the representatives of 176 countries including Ukraine met in Rio de Janeiro at the UN Conference to coordinate its efforts in protecting and guarding the environment. Signature of the UN Framework Convention on Climate Change by around 150 countries indicates that climate change is potentially a major threat to the world`s environment and economic development. The project {open_quotes}Country Study on Climate Change in Ukraine{close_quotes} coordinated by the Agency for Rational Energy Use and Ecology (ARENIA-ECO) and supported by the US Country Studies Program Support for Climate Change Studies. The aim of the project is to make the information related to climate change in Ukraine available for the world community by using the potential of Ukrainian research institutes for further concerted actions to solve the problem of climate change on the global scale. The project consists of four elements: (1) the development of the GHG Inventory in Ukraine; (2) assessments of ecosystems-vulnerability to climate change and adaptation options; and (3) mitigation options analysis; (4) public education and outreach activities. This paper contains the main results of the third element for the energy and non-energy sectors. Main tasks of the third element were: (1) to select, test and describe or develop the methodology for mitigation options assessment; (2) to analyze the main sources of GHG emissions in Ukraine; (3) to give the macro economic analysis of Ukrainian development and the development of main economical sectors industry, energy, transport, residential, forestry and agriculture; (4) to forecast GHG emissions for different scenarios of the economic development; and (5) to analyze the main measures to mitigate climate change.

The influence of mitigation on sage-grouse habitat selection within an energy development field.

Directory of Open Access Journals (Sweden)

Bradley C Fedy

implemented may be responsible for the measurable improvement in sage-grouse nesting habitats within the development area. However, we cannot reject alternative hypotheses concerning the influence of population density and intraspecific competition. Additionally, we were unable to assess the actual fitness consequences of mitigation or the source-sink dynamics of the habitats. We compared the pre-mitigation and post-mitigation models predicted as maps with habitats ranked from low to high relative probability of use (equal-area bins: 1 - 5. We found more improvement in habitat rank between the two time periods around mitigated wells compared to non-mitigated wells. Informed mitigation within energy development fields could help improve habitats within the field. We recommend that any mitigation effort include well-informed plans to monitor the effectiveness of the implemented mitigation actions that assess both habitat use and relevant fitness parameters.

The role of non-CO2 mitigation within the dairy sector in pursuing climate goals

Science.gov (United States)

Rolph, K.; Forest, C. E.

2017-12-01

Mitigation of non-CO2 climate forcing agents must complement the mitigation of carbon dioxide (CO2) to achieve long-term temperature and climate policy goals. By using multi-gas mitigation strategies, society can limit the rate of temperature change on decadal timescales and reduce the cost of implementing policies that only consider CO2 mitigation. The largest share of global non-CO2 greenhouse gas emissions is attributed to agriculture, with activities related to dairy production contributing the most in this sector. Approximately 4% of global anthropogenic greenhouse gas emissions is released from the dairy sub-sector, primarily through enteric fermentation, feed production, and manure management. Dairy farmers can significantly reduce their emissions by implementing better management practices. This study assesses the potential mitigation of projected climate change if greenhouse gases associated with the dairy sector were reduced. To compare the performance of several mitigation measures under future climate change, we employ a fully coupled earth system model of intermediate complexity, the MIT Integrated Global System Model (IGSM). The model includes an interactive carbon-cycle capable of addressing important feedbacks between the climate and terrestrial biosphere. Mitigation scenarios are developed using estimated emission reductions of implemented management practices studied by the USDA-funded Sustainable Dairy Project (Dairy-CAP). We examine pathways to reach the US dairy industry's voluntary goal of reducing dairy emissions 25% by 2020. We illustrate the importance of ongoing mitigation efforts in the agricultural industry to reduce non-CO2 greenhouse gas emissions towards established climate goals.

Economic aspects of hydro geological risk mitigation measures management in Italy: the ReNDiS project experience

Science.gov (United States)

Spizzichino, D.; Campobasso, C.; Gallozzi, P. L.; Dessi', B.; Traversa, F.

2009-04-01

queries, we have grouped engineering works in several categories that have been related to the characteristics and type of hazards Vs cost-benefit analysis and timing of each work. Implementing a statistical analysis of the ReNDiS database, it has been possible to attempt a first spatial and temporal comparison between zoning of risk and distribution of preventive measures with relative cost at national level. In synthesis, this study has shown that although the total amount of resources devoted to preventive measures are not enough to remove the risk over the entire territory, the response of Italian institutions is in general well calibrated on the characteristic and type of hazard, but still very complex. Further efforts are necessary in order to improve the knowledge on landslides and flood prone areas, also in the perspective of adaptation to climate changes and to better address the public investments where the hydro geological risk is more critical. The importance of this monitoring activities is mainly due to limited financial resources of the Italian public sector in soil protection. Data collection, monitoring activities and statistical analysis like the ones carried out in ReNDiS experience is one of the best way in order to optimise the allocation of financial resources for the mitigation of natural hazard and risk.

Operational measures for the mitigation of MIC [microbiologically influenced corrosion

International Nuclear Information System (INIS)

Johnson, C.J.

1989-01-01

Although entitled Operational Measure, this section of the workshop encompasses aspects of mitigating MIC by controlling the hydraulic characteristics of a system. In order for operational considerations outside of the chemical treatment program to be effective, the system must be designed, constructed or modified, and maintained with MIC in mind. Since other papers in these proceedings discuss in detail the proper selection of materials, chemical treatments and detection of monitoring techniques, this paper is limited to quidelines for mitigating MIC and its effects by the mechanical design, maintenance and operation of the system. The key concept behind this philosophy is the synergistic relationships among microbes and among microbes and larger biofouling organisms. If the slime formers or other marine organisms can be prevented from attaching to the components, conducive environments for attack by other species is avoided

CFD evaluation of hydrogen risk mitigation measures in a VVER-440/213 containment

Energy Technology Data Exchange (ETDEWEB)

Heitsch, Matthias, E-mail: Matthias.Heitsch@ec.europa.e [Institute for Energy, Joint Research Centre, PO Box 2, 1755 ZG Petten (Netherlands); Huhtanen, Risto [VTT Technical Research Centre of Finland, PO Box 1000, FI-02044 VTT (Finland); Techy, Zsolt [VEIKI Institute for Electric Power Research Co., PO Box 80, H-1251 Budapest (Hungary); Fry, Chris [Serco, Winfrith Technology Centre, Dorchester, Dorset DT2 8DH (United Kingdom); Kostka, Pal [VEIKI Institute for Electric Power Research Co., PO Box 80, H-1251 Budapest (Hungary); Niemi, Jarto [VTT Technical Research Centre of Finland, PO Box 1000, FI-02044 VTT (Finland); Schramm, Berthold [Gesellschaft fuer Anlagen- und Reaktorsicherheit, GRS mbH, Schwertnergasse 1, 50667 Koeln (Germany)

2010-02-15

In the PHARE project 'Hydrogen Management for the VVER440/213' (HU2002/000-632-04-01), CFD (Computational Fluid Dynamics) calculations using GASFLOW, FLUENT and CFX were performed for the Paks NPP (Nuclear Power Plant), modelling a defined severe accident scenario which involves the release of hydrogen. The purpose of this work is to demonstrate that CFD codes can be used to model gas movement inside a containment during a severe accident. With growing experience in performing such analyses, the results encourage the use of CFD in assessing the risk of losing containment integrity as a result of hydrogen deflagrations. As an effective mitigation measure in such a situation, the implementation of catalytic recombiners is planned in the Paks NPP. In order to support these plans both unmitigated and recombiner-mitigated simulations were performed. These are described and selected results are compared. The codes CFX and FLUENT needed refinement to their models of wall and bulk steam condensation in order to be able to fully simulate the severe accident under consideration. Several CFD codes were used in parallel to model the same accident scenario in order to reduce uncertainties in the results. Previously it was considered impractical to use CFD codes to simulate a full containment subject to a severe accident extending over many hours. This was because of the expected prohibitive computing times and missing physical capabilities of the codes. This work demonstrates that, because of developments in the capabilities of CFD codes and improvements in computer power, these calculations have now become feasible.

Debris mitigation measures by satellite design and operational methods - Findings from the DLR space debris End-to-End Service

Science.gov (United States)

Sdunnus, H.; Beltrami, P.; Janovsky, R.; Koppenwallner, G.; Krag, H.; Reimerdes, H.; Schäfer, F.

Debris Mitigation has been recognised as an issue to be addressed by the space faring nations around the world. Currently, there are various activities going on, aiming at the establishment of debris mitigation guidelines on various levels, reaching from the UN down to national space agencies. Though guidelines established on the national level already provide concrete information how things should be done (rather that specifying what should be done or providing fundamental principles) potential users of the guidelines will still have the need to explore the technical, management, and financial implications of the guidelines for their projects. Those questions are addressed by the so called "Space Debris End-to-End Service" project, which has been initiated as a national initiative of the German Aerospace Centre (DLR). Based on a review of already existing mitigation guidelines or guidelines under development and following an identification of needs from a circle of industrial users the "End-to-End Service Gu idelines" have been established for designer and operators of spacecraft. The End-to-End Service Guidelines are based on requirements addressed by the mitigation guidelines and provide recommendations how and when the technical consideration of the mitigation guidelines should take place. By referencing requirements from the mitigation guidelines, the End-to-End Service Guidelines address the consideration of debris mitigation measures by spacecraft design and operational measures. This paper will give an introduction to the End-to-End Service Guidelines. It will focus on the proposals made for mitigation measures by the S/C system design, i.e. on protective design measures inside the spacecraft and on design measures, e.g. innovative protective (shielding) systems. Furthermore, approaches on the analytical optimisation of protective systems will be presented, aiming at the minimisation of shield mass under conservation of the protective effects. On the

Extended blackout mitigation strategy for PWR

International Nuclear Information System (INIS)

Prošek, Andrej; Volkanovski, Andrija

2015-01-01

Highlights: • Equipment for mitigation of the extended blackout is investigated. • Analysis is done with deterministic safety analysis methods. • Strategy to prevent core heatup and not overfill steam generator is proposed. • Six types of reactor coolant system loss scenarios are investigated. • Pump flowrates and available start time to feed steam generators is determined. - Abstract: The accident at the Fukushima Daiichi nuclear power plant demonstrated the vulnerability of the plants on the loss of electrical power and loss of the ultimate heat sink events. A set of measures are proposed and currently implemented in response of the accident at the Fukushima Daiichi nuclear power plant. Those measures include diverse and flexible mitigation strategies that increase the defence-in-depth for beyond-design-basis scenarios. Mitigation strategies are based on the utilization of the portable equipment to provide power and water to the nuclear power plants in order to maintain or restore key safety functions. The verification of the proposed measures with the plant specific safety analyses is endorsed in the mitigation strategies. This paper investigates utilization of the turbine driven auxiliary feedwater pump (TD-AFW) or portable water injection pump for the mitigation of the event of loss of all alternate current sources and batteries (extended station blackout). Methodology for assessment of the required pump injection flow rate with the application of the standard deterministic safety analysis code is developed and presented. The required injection rate to the steam generators is calculated from the cumulative water mass injected by the turbine driven auxiliary feedwater pump in the analysed scenarios, when desired normal level is maintained automatically. The developed methodology allows assessment of the required injections rates of pump, TD-AFW or portable, for different plant configurations and number of flow rate changes. The methodology is applied

Extended blackout mitigation strategy for PWR

Energy Technology Data Exchange (ETDEWEB)

Prošek, Andrej, E-mail: andrej.prosek@ijs.si; Volkanovski, Andrija, E-mail: andrija.volkanovski@ijs.si

2015-12-15

Highlights: • Equipment for mitigation of the extended blackout is investigated. • Analysis is done with deterministic safety analysis methods. • Strategy to prevent core heatup and not overfill steam generator is proposed. • Six types of reactor coolant system loss scenarios are investigated. • Pump flowrates and available start time to feed steam generators is determined. - Abstract: The accident at the Fukushima Daiichi nuclear power plant demonstrated the vulnerability of the plants on the loss of electrical power and loss of the ultimate heat sink events. A set of measures are proposed and currently implemented in response of the accident at the Fukushima Daiichi nuclear power plant. Those measures include diverse and flexible mitigation strategies that increase the defence-in-depth for beyond-design-basis scenarios. Mitigation strategies are based on the utilization of the portable equipment to provide power and water to the nuclear power plants in order to maintain or restore key safety functions. The verification of the proposed measures with the plant specific safety analyses is endorsed in the mitigation strategies. This paper investigates utilization of the turbine driven auxiliary feedwater pump (TD-AFW) or portable water injection pump for the mitigation of the event of loss of all alternate current sources and batteries (extended station blackout). Methodology for assessment of the required pump injection flow rate with the application of the standard deterministic safety analysis code is developed and presented. The required injection rate to the steam generators is calculated from the cumulative water mass injected by the turbine driven auxiliary feedwater pump in the analysed scenarios, when desired normal level is maintained automatically. The developed methodology allows assessment of the required injections rates of pump, TD-AFW or portable, for different plant configurations and number of flow rate changes. The methodology is applied

Loss of flow accident and its mitigation measures for nuclear systems with SCWR-M

International Nuclear Information System (INIS)

Xu Zhihong; Hou Dong; Fu Shengwei; Yang Yanhua; Cheng Xu

2011-01-01

Highlights: → A model of mixed spectrum SCWR system is established by a revised version of RELAP5. → Some important parameters are chosen to analysis the SCWR-M during LOFA. → Three important mitigation measures for LOFA of SCWR-M are derived from the results. - Abstract: Based on a revised version of RELAP5, which can be used for super-critical pressure calculation, a model of mixed spectrum SCWR (SCWR-M) system is established. To analyze the transient behavior of SCWR-M and develop mitigation measures during loss of flow accident (LOFA), some important parameters, e.g. reactor coolant pump (RCP) coast-down time, Reactor Pressure Vessel (RPV) upper water volume and safety injection flow, etc., are chosen for the parametric analysis. The results achieved so far indicate that the SCWR-M system design is feasible and promising. Three important mitigation measures for LOFA of SCWR-M are derived from the results: RCP coast-down time of more than 15 s, RPV upper water volume of more than 27 m 3 , and safety injection of more than 5% of the system design flow.

Climate change and livestock: Impacts, adaptation, and mitigation

Directory of Open Access Journals (Sweden)

M. Melissa Rojas-Downing

2017-01-01

Full Text Available Global demand for livestock products is expected to double by 2050, mainly due to improvement in the worldwide standard of living. Meanwhile, climate change is a threat to livestock production because of the impact on quality of feed crop and forage, water availability, animal and milk production, livestock diseases, animal reproduction, and biodiversity. This study reviews the global impacts of climate change on livestock production, the contribution of livestock production to climate change, and specific climate change adaptation and mitigation strategies in the livestock sector. Livestock production will be limited by climate variability as animal water consumption is expected to increase by a factor of three, demand for agricultural lands increase due to need for 70% growth in production, and food security concern since about one-third of the global cereal harvest is used for livestock feed. Meanwhile, the livestock sector contributes 14.5% of global greenhouse gas (GHG emissions, driving further climate change. Consequently, the livestock sector will be a key player in the mitigation of GHG emissions and improving global food security. Therefore, in the transition to sustainable livestock production, there is a need for: a assessments related to the use of adaptation and mitigation measures tailored to the location and livestock production system in use, and b policies that support and facilitate the implementation of climate change adaptation and mitigation measures.

Evaluation of the varying Naturally Occurring Asbestos mitigation measures at School and Commercial construction projects in California

Science.gov (United States)

Kalika, S.

2012-12-01

In commercial development or K-12 school construction, project sites are often purchased and much of the planning process completed prior to an assessment of the soils proposed for excavation or potential offhaul. Geologic maps, while initially helpful for identifying potential hazards such as landslides and earthquake faults, are less helpful in the identification of naturally occurring hazardous minerals, such as the seven regulated minerals currently classified as asbestos. Geologic maps identify mafic and ultramafic bedrock zones; however, a skilled geologist with knowledge of asbestos hazards will further visualize the earth-shaping processes that may have resulted in the deposition of naturally occurring asbestos in locations outside mapped ultramafic zones including the base of an alluvial fan or within streambed channels. When sampled as an afterthought prior to disposal, property owners are surprised by the budget-crippling costs of waste handling and disposal of NOA, as well as mitigations required to protect the health of construction workers, the public, and future site occupants. The California Air Resources Board (CARB) continues to lead the way in evaluation and regulation of NOA, through development of the CARB 435 preparation and laboratory analytical method, local enforcement of the Asbestos Airborne Toxic Control Measure for Construction, Grading, Quarrying, and Surface Mining Operations (ATCM), and implementation of dust control measures to protect public health. A thorough site evaluation and construction design includes utilization of the sampling methods developed by the California Geological Survey, laboratory analytical methods within CARB 435, and mitigation measures required by CARB, DTSC, and OSHA for the protection of worker and public health after NOA is discovered. The site evaluation should additionally include an assessment of the future site usage, as regulations differ based on potential health affects to future occupants

A Review of Risk Perceptions and Other Factors that Influence Flood Mitigation Behavior

NARCIS (Netherlands)

Bubeck, P.; Botzen, W.J.W.; Aerts, J.C.J.H.

2012-01-01

In flood risk management, a shift can be observed toward more integrated approaches that increasingly address the role of private households in implementing flood damage mitigation measures. This has resulted in a growing number of studies into the supposed positive relationship between individual

A systematic analysis of enabling conditions for synergy between climate change mitigation and adaptation measures in developing countries

NARCIS (Netherlands)

Duguma, L.A.; Wambugu, S.W.; Minang, P.A.; Noordwijk, van M.

2014-01-01

There is a growing quest for synergy between mitigation and adaptation due to concerns of inefficiency and ineffectiveness of the compartmentalized approaches to climate change. However, little has been done to explore the necessary enabling conditions for synergistic design and implementation. This

Measurements of electron cloud growth and mitigation in dipole, quadrupole, and wiggler magnets

Energy Technology Data Exchange (ETDEWEB)

Calvey, J.R., E-mail: jrc97@cornell.edu; Hartung, W.; Li, Y.; Livezey, J.A.; Makita, J.; Palmer, M.A.; Rubin, D.

2015-01-11

Retarding field analyzers (RFAs), which provide a localized measurement of the electron cloud, have been installed throughout the Cornell Electron Storage Ring (CESR), in different magnetic field environments. This paper describes the RFA designs developed for dipole, quadrupole, and wiggler field regions, and provides an overview of measurements made in each environment. The effectiveness of electron cloud mitigations, including coatings, grooves, and clearing electrodes, are assessed with the RFA measurements.

A review of risk perceptions and other factors that influence flood mitigation behavior.

Science.gov (United States)

Bubeck, P; Botzen, W J W; Aerts, J C J H

2012-09-01

In flood risk management, a shift can be observed toward more integrated approaches that increasingly address the role of private households in implementing flood damage mitigation measures. This has resulted in a growing number of studies into the supposed positive relationship between individual flood risk perceptions and mitigation behavior. Our literature review shows, however, that, actually, this relationship is hardly observed in empirical studies. Two arguments are provided as an explanation. First, on the basis of protection motivation theory, a theoretical framework is discussed suggesting that individuals' high-risk perceptions need to be accompanied by coping appraisal to result in a protective response. Second, it is pointed out that possible feedback from already-adopted mitigation measures on risk perceptions has hardly been considered by current studies. In addition, we also provide a review of factors that drive precautionary behavior other than risk perceptions. It is found that factors such as coping appraisal are consistently related to mitigation behavior. We conclude, therefore, that the current focus on risk perceptions as a means to explain and promote private flood mitigation behavior is not supported on either theoretical or empirical grounds. © 2012 Society for Risk Analysis.

Implications of Climate Mitigation for Future Agricultural Production

Science.gov (United States)

Mueller, Christoph; Elliott, Joshua; Chryssanthacopoulos, James; Deryng, Delphine; Folberth, Christian; Pugh, Thomas A. M.; Schmid, Erwin

2015-01-01

Climate change is projected to negatively impact biophysical agricultural productivity in much of the world. Actions taken to reduce greenhouse gas emissions and mitigate future climate changes, are thus of central importance for agricultural production. Climate impacts are, however, not unidirectional; some crops in some regions (primarily higher latitudes) are projected to benefit, particularly if increased atmospheric carbon dioxide is assumed to strongly increase crop productivity at large spatial and temporal scales. Climate mitigation measures that are implemented by reducing atmospheric carbon dioxide concentrations lead to reductions both in the strength of climate change and in the benefits of carbon dioxide fertilization. Consequently, analysis of the effects of climate mitigation on agricultural productivity must address not only regions for which mitigation is likely to reduce or even reverse climate damages. There are also regions that are likely to see increased crop yields due to climate change, which may lose these added potentials under mitigation action. Comparing data from the most comprehensive archive of crop yield projections publicly available, we find that climate mitigation leads to overall benefits from avoided damages at the global scale and especially in many regions that are already at risk of food insecurity today. Ignoring controversial carbon dioxide fertilization effects on crop productivity, we find that for the median projection aggressive mitigation could eliminate approximately 81% of the negative impacts of climate change on biophysical agricultural productivity globally by the end of the century. In this case, the benefits of mitigation typically extend well into temperate regions, but vary by crop and underlying climate model projections. Should large benefits to crop yields from carbon dioxide fertilization be realized, the effects of mitigation become much more mixed, though still positive globally and beneficial in many

Implications of climate mitigation for future agricultural production

International Nuclear Information System (INIS)

Müller, Christoph; Elliott, Joshua; Chryssanthacopoulos, James; Deryng, Delphine; Folberth, Christian; Pugh, Thomas A M; Schmid, Erwin

2015-01-01

Climate change is projected to negatively impact biophysical agricultural productivity in much of the world. Actions taken to reduce greenhouse gas emissions and mitigate future climate changes, are thus of central importance for agricultural production. Climate impacts are, however, not unidirectional; some crops in some regions (primarily higher latitudes) are projected to benefit, particularly if increased atmospheric carbon dioxide is assumed to strongly increase crop productivity at large spatial and temporal scales. Climate mitigation measures that are implemented by reducing atmospheric carbon dioxide concentrations lead to reductions both in the strength of climate change and in the benefits of carbon dioxide fertilization. Consequently, analysis of the effects of climate mitigation on agricultural productivity must address not only regions for which mitigation is likely to reduce or even reverse climate damages. There are also regions that are likely to see increased crop yields due to climate change, which may lose these added potentials under mitigation action. Comparing data from the most comprehensive archive of crop yield projections publicly available, we find that climate mitigation leads to overall benefits from avoided damages at the global scale and especially in many regions that are already at risk of food insecurity today. Ignoring controversial carbon dioxide fertilization effects on crop productivity, we find that for the median projection aggressive mitigation could eliminate ∼81% of the negative impacts of climate change on biophysical agricultural productivity globally by the end of the century. In this case, the benefits of mitigation typically extend well into temperate regions, but vary by crop and underlying climate model projections. Should large benefits to crop yields from carbon dioxide fertilization be realized, the effects of mitigation become much more mixed, though still positive globally and beneficial in many food insecure

Dual Axis Radiographic Hydrodynamic Test Facility mitigation action plan. Annual report for 1997

Energy Technology Data Exchange (ETDEWEB)

Haagenstad, H.T.

1998-01-15

This Mitigation Action Plan Annual Report (MAPAR) has been prepared by the US Department of Energy (DOE) as part of implementing the Dual Axis Radiographic Hydrodynamic Test Facility (DARHT) Mitigation Action Plan (MAP). This MAPAR provides a status on specific DARHT facility design- and construction-related mitigation actions that have been initiated in order to fulfill DOE`s commitments under the DARHT MAP. The functions of the DARHT MAP are to (1) document potentially adverse environmental impacts of the Phased Containment Option delineated in the Final EIS, (2) identify commitments made in the Final EIS and ROD to mitigate those potential impacts, and (3) establish Action Plans to carry out each commitment (DOE 1996). The DARHT MAP is divided into eight sections. Sections 1--5 provide background information regarding the NEPA review of the DARHT project and an introduction to the associated MAP. Section 6 references the Mitigation Action Summary Table which summaries the potential impacts and mitigation measures; indicates whether the mitigation is design-, construction-, or operational-related; the organization responsible for the mitigation measure; and the projected or actual completion data for each mitigation measure. Sections 7 and 8 discuss the Mitigation Action Plan Annual Report and Tracking System commitment and the Potential Impacts, Commitments, and Action Plans respectively. Under Section 8, potential impacts are categorized into five areas of concern: General Environment, including impacts to air and water; Soils, especially impacts affecting soil loss and contamination; Biotic Resources, especially impacts affecting threatened and endangered species; Cultural/Paleontological Resources, especially impacts affecting the archeological site known as Nake`muu; and Human Health and Safety, especially impacts pertaining to noise and radiation. Each potential impact includes a brief statement of the nature of the impact and its cause(s). The commitment

Co-creation of climate change mitigation policies

DEFF Research Database (Denmark)

Hoff, Jens Villiam

The focus of this paper is on the places where citizens and public authorities meet – possible involving other stakeholders as well – to discuss, formulate and implement climate change mitigation policies at the local level. Through looking at a number of concrete cases stemming from the CIDEA re...... mitigation policies should be aimed at finding ways to support citizen initiated initiatives to a greater extent than is currently the case. Keywords: climate change mitigation, co-creation, behaviour, communities, citizen driven innovation....

Towards exascale real-time RFI mitigation

NARCIS (Netherlands)

van Nieuwpoort, R.V.

2016-01-01

We describe the design and implementation of an extremely scalable real-time RFI mitigation method, based on the offline AOFlagger. All algorithms scale linearly in the number of samples. We describe how we implemented the flagger in the LOFAR real-time pipeline, on both CPUs and GPUs. Additionally,

Mitigation of Hydrogen Hazards in Severe Accidents in Nuclear Power Plants

International Nuclear Information System (INIS)

2011-07-01

Consideration of severe accidents in nuclear power plants is an essential component of the defence in depth approach in nuclear safety. Severe accidents have very low probabilities of occurring, but may have significant consequences resulting from the degradation of nuclear fuel. The generation of hydrogen and the risk of hydrogen combustion, as well as other phenomena leading to overpressurization of the reactor containment in case of severe accidents, represent complex safety issues in relation to accident management. The combustion of hydrogen, produced primarily as a result of heated zirconium metal reacting with steam, can create short term overpressure or detonation forces that may exceed the strength of the containment structure. An understanding of these phenomena is crucial for planning and implementing effective accident management measures. Analysis of all the issues relating to hydrogen risk is an important step for any measure that is aimed at the prevention or mitigation of hydrogen combustion in reactor containments. The main objective of this publication is to contribute to the implementation of IAEA Safety Standards, in particular, two IAEA Safety Requirements: Safety of Nuclear Power Plants: Design and Safety of Nuclear Power Plants: Operation. These Requirements publications discuss computational analysis of severe accidents and accident management programmes in nuclear power plants. Specifically with regard to the risk posed by hydrogen in nuclear power reactors, computational analysis of severe accidents considers hydrogen sources, hydrogen distribution, hydrogen combustion and control and mitigation measures for hydrogen, while accident management programmes are aimed at mitigating hydrogen hazards in reactor containments.

The impact of floods in hospital and mitigation measures: A literature review

Science.gov (United States)

Yusoff, N. A.; Shafii, H.; Omar, R.

2017-11-01

In late December 2014, the flood was most significant and largest recorded specifically in the Kelantan, Malaysia. It was considered to be a “tsunami like disaster” in which 202,000 victims were displaced and causing widespread collapse of public infrastructure. Flooding of hospital results in interruption of business, loss of infrastructure, such as electrical power and water supplies, increased difficulty in providing routine medical and increased patient admissions and nursing care for patients with chronic diseases, such as renal failure, diabetes, cancer, cystic fibrosis and mental illness. The aimed of this paper to identify the best of measures for reduce the risk of flood in hospital. Method of this paper uses the previous study result. Several related previous study can be used as measures to mitigation flood risk in Malaysian hospitals. Early stage research of related studies hope to help add more information to assist researchers in reducing the risk of flooding in hospital. The findings with proper pre-event preparation framework for mitigation flood risk of hospitals, the continuing medical services can be provided to patient especially during emergency.

Wildlife mitigation program. Draft environmental impact statement

International Nuclear Information System (INIS)

1996-08-01

Bonneville Power Administration (BPA) is responsible for mitigating the loss of wildlife habitat caused by the development of the Federal Columbia River Power System. BPA accomplishes this mitigation by funding projects consistent with those recommended by the Northwest Power Planning Council (Council). The projects are submitted to the Council from Indian Tribes, state agencies, property owners, private conservation groups, and other Federal agencies. Future wildlife mitigation actions with potential environmental impacts are expected to include land acquisition and management, water rights acquisition and management, habitat restoration and enhancement, installation of watering devices, riparian fencing, and similar wildlife conservation actions. BPA needs to ensure that individual wildlife mitigation projects are planned and managed with appropriate consistency across projects, jurisdictions, and ecosystems, as well as across time. BPA proposes to standardize the planning and implementation of individual wildlife mitigation projects funded by BPA. Alternative 1 is the No Action alternative. Five standardizing alternatives are identified to represent the range of possible strategies, goals, and procedural requirements reasonably applicable to BPA-funded projects under a standardized approach to project planning and implementation. All action alternatives are based on a single project planning process designed to resolve site-specific issues in an ecosystem context and to adapt to changing conditions and information

Wildlife mitigation program final environmental impact statement

International Nuclear Information System (INIS)

1997-03-01

BPA is responsible for mitigating the loss of wildlife habitat caused by the development of the Federal Columbia River Power System. BPA accomplishes this mitigation by funding projects consistent with those recommended by the Northwest Power Planning Council (Council). The projects are submitted to the Council from Indian Tribes, state agencies, property owners, private conservation groups, and other Federal agencies. future wildlife mitigation actions with potential environmental impacts are expected to include land acquisition and management, water rights acquisition and management, habitat restoration and improvement, installation of watering devices, riparian fencing, and similar wildlife conservation actions. BPA needs to ensure that individual wildlife mitigation projects are planned and managed with appropriate consistency across projects, jurisdictions, and ecosystems, as well as across time. BPA proposes to standardize the planning and implementation of individual wildlife mitigation projects funded by BPA. Alternative 1 is the No Action alternative, i.e., not to establish program-wide standards. Five standardizing (action) alternatives are identified to represent the range of possible strategies, goals, and procedural requirements reasonably applicable to BPA-funded projects under a standardized approach to project planning and implementation. All action alternatives are based on a single project planning process designed to resolve site-specific issues in an ecosystem context and to adapt to changing conditions and information

Mitigating amphibian chytridiomycosis in nature

Science.gov (United States)

Garner, Trenton W. J.; Schmidt, Benedikt R.; Martel, An; Pasmans, Frank; Muths, Erin L.; Cunningham, Andrew A.; Weldon, Che; Fisher, Matthew C.; Bosch, Jaime

2016-01-01

Amphibians across the planet face the threat of population decline and extirpation caused by the disease chytridiomycosis. Despite consensus that the fungal pathogens responsible for the disease are conservation issues, strategies to mitigate their impacts in the natural world are, at best, nascent. Reducing risk associated with the movement of amphibians, non-amphibian vectors and other sources of infection remains the first line of defence and a primary objective when mitigating the threat of disease in wildlife. Amphibian-associated chytridiomycete fungi and chytridiomycosis are already widespread, though, and we therefore focus on discussing options for mitigating the threats once disease emergence has occurred in wild amphibian populations. All strategies have shortcomings that need to be overcome before implementation, including stronger efforts towards understanding and addressing ethical and legal considerations. Even if these issues can be dealt with, all currently available approaches, or those under discussion, are unlikely to yield the desired conservation outcome of disease mitigation. The decision process for establishing mitigation strategies requires integrated thinking that assesses disease mitigation options critically and embeds them within more comprehensive strategies for the conservation of amphibian populations, communities and ecosystems.

Co-benefits, trade-offs, barriers and policies for greenhouse gas mitigation in the agriculture, forestry and other land use (AFOLU) sector.

Science.gov (United States)

Bustamante, Mercedes; Robledo-Abad, Carmenza; Harper, Richard; Mbow, Cheikh; Ravindranat, Nijavalli H; Sperling, Frank; Haberl, Helmut; Pinto, Alexandre de Siqueira; Smith, Pete

2014-10-01

The agriculture, forestry and other land use (AFOLU) sector is responsible for approximately 25% of anthropogenic GHG emissions mainly from deforestation and agricultural emissions from livestock, soil and nutrient management. Mitigation from the sector is thus extremely important in meeting emission reduction targets. The sector offers a variety of cost-competitive mitigation options with most analyses indicating a decline in emissions largely due to decreasing deforestation rates. Sustainability criteria are needed to guide development and implementation of AFOLU mitigation measures with particular focus on multifunctional systems that allow the delivery of multiple services from land. It is striking that almost all of the positive and negative impacts, opportunities and barriers are context specific, precluding generic statements about which AFOLU mitigation measures have the greatest promise at a global scale. This finding underlines the importance of considering each mitigation strategy on a case-by-case basis, systemic effects when implementing mitigation options on the national scale, and suggests that policies need to be flexible enough to allow such assessments. National and international agricultural and forest (climate) policies have the potential to alter the opportunity costs of specific land uses in ways that increase opportunities or barriers for attaining climate change mitigation goals. Policies governing practices in agriculture and in forest conservation and management need to account for both effective mitigation and adaptation and can help to orient practices in agriculture and in forestry towards global sharing of innovative technologies for the efficient use of land resources. Different policy instruments, especially economic incentives and regulatory approaches, are currently being applied however, for its successful implementation it is critical to understand how land-use decisions are made and how new social, political and economic forces

13 CFR 123.402 - Can your business include its relocation as a mitigation measure in an application for a pre...

Science.gov (United States)

2010-01-01

... participating in the Pre-Disaster Mitigation Program and SFHAs or visit the FEMA Web site at http://www.fema.gov. ... relocation as a mitigation measure in an application for a pre-disaster mitigation loan? 123.402 Section 123.402 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION DISASTER LOAN PROGRAM Pre-Disaster...

Assessing the effect of nutrient mitigation measures in the watersheds of the Southern Bight of the North Sea.

Science.gov (United States)

Thieu, Vincent; Garnier, Josette; Billen, Gilles

2010-02-15

The Seine, Somme, and Scheldt Rivers (France, Belgium, and Netherlands) are the major delivering rivers flowing into the continental coastal zone of the Southern Bight of the North Sea, an area regularly affected by eutrophication problems. In the present work, the Seneque-Riverstrahler model was implemented in a multi-regional case study in order to test several planned mitigation measures aimed at limiting stream nutrient contamination and restoring balanced nutrient ratios at the coastal zone. This modeling approach, which is spatially distributed at the basin scale, allows assessing the impact of any change in human activities, which widely differ over the three basins. Here, we define realistic scenarios based on currently proposed measures to reduce point and non-point sources, such as the upgrading of wastewater treatment, the introduction of catch crops, and the development of extensive farming. An analysis of the current situation showed that a 47-72% reduction in P point-source emissions within the three basins could be reached if the intended P treatment was generalized to the largest treatment plants. However, only an overall 14-23% reduction in N could be achieved at the outlet of the three basins, by combining improved wastewater treatment and land use with management measures aimed at regulating agricultural practices. Nonetheless, in spite of these efforts, N will still be exported in large excess with respect to the equilibrium defined by the Redfield ratios, even in the most optimistic hypothesis describing the long-term response of groundwater nitrate concentrations. A comprehensive assessment of these mitigation measures supports the need for additional reductions of nutrient losses from agriculture to control harmful algae development. It also stresses the relevance of this mechanistic approach, in which nutrient transfers from land to sea can be calculated, as an integrated strategy to test policy recommendations.

Libby Mitigation Program, 2007 Annual Progress Report: Mitigation for the Construction and Operation of Libby Dam.

Energy Technology Data Exchange (ETDEWEB)

Dunnigan, James; DeShazer, J.; Garrow, L.

2009-05-26

and fish habitat in basin streams and lakes. 'Mitigation for the Construction and Operation of Libby Dam' is part of the Northwest Power and Conservation Council's (NPCC) resident fish and wildlife program. The program was mandated by the Northwest Planning Act of 1980, and is responsible for mitigating damages to fish and wildlife caused by hydroelectric development in the Columbia River Basin. The objective of Phase I of the project (1983 through 1987) was to maintain or enhance the Libby Reservoir fishery by quantifying seasonal water levels and developing ecologically sound operational guidelines. The objective of Phase II of the project (1988 through 1996) was to determine the biological effects of reservoir operations combined with biotic changes associated with an aging reservoir. The objectives of Phase III of the project (1996 through present) are to implement habitat enhancement measures to mitigate for dam effects, to provide data for implementation of operational strategies that benefit resident fish, monitor reservoir and river conditions, and monitor mitigation projects for effectiveness. This project completes urgent and high priority mitigation actions as directed by the Kootenai Subbasin Plan.

Design and implementation of a virtual laboratory of radiation measurement

International Nuclear Information System (INIS)

Alvarez T, J. R.; Morales S, J. B.

2009-10-01

The work involves the implementation of a virtual laboratory, this project is conducted in the Faculty of Engineering of National Autonomous University of Mexico with the name of LANUVI. It is intended that the laboratory can be used by students who have interest in the nuclear radiation knowledge as well as in its detection and attenuation, in addition serve as and introduction to nuclear systems. In the first part of project will conduct a source that can simulate the particle radiation of Alfa, beta, neutrons and gamma rays. The project will take sources used in class laboratories and elements that are dangerous but are used in different practical applications. After taking the source analyzing the particles behaviour in different media like air, animal tissue, aluminium, lead, etc. The analysis is done in different ways in order to know with which material can stop or mitigate the different types of radiation. Finally shall be measure radioactivity with different types of detectors. At this point, has the behaviour of ionization chamber but in the future is expected to make the simulation of some other radiation detectors. The mathematical models we represent the behaviour of these cases were implemented in free software. The program will be used to implement the virtual laboratory with radiation sources, detectors and different types of shields will be Blender which is a free software that is used by many users for the embodiment of games but try to use as a tool to help visualize the different equipment that is widely used in a radioactive materials laboratory. (Author)

Implementation of hydrogen mitigation techniques during severe accidents in nuclear power plants

International Nuclear Information System (INIS)

1996-01-01

concentration and under special geometric conditions, an accelerated flame or even a local detonation may occur which would produce higher dynamic loads than a deflagration and a more serious threat to equipment and structures. Should it occur in spite of its low probability, a global detonation, following prolonged and extensive accumulation of hydrogen in the containment atmosphere, would be a major threat to the containment integrity. The goal of hydrogen mitigation techniques is to prevent loads, resulting from hydrogen combustion, which could threaten containment integrity. The risk of containment failure depends on the overall hydrogen concentration which is dependent on the amount of hydrogen released and the containment volume. A possible containment failure also depends on the containment structure and design which is very important in the resistance of the containment to a global combustion. Geometrical sub-compartmentalization is also very important, because significant amounts of hydrogen could accumulate in compartments to create high local concentrations of hydrogen that could be well within the detonability limits. Once accident management measures aimed at preventing severe accidents from occurring have failed and hydrogen is being generated and released to the containment atmosphere in large amounts, the first step is to reduce the possibility of hydrogen accumulating to flammable concentrations. Where flammable concentrations cannot be precluded, the next step is to minimize the volume of gas at flammable concentrations and the third and last step is to prevent further increasing hydrogen levels from the flammable to detonable mixture concentrations. The purpose of this paper is to present a snapshot, from a technical viewpoint, of the current situation regarding the implementation of hydrogen mitigation techniques for severe accident conditions in nuclear power plants. Broader aspects related to overall accident management policies are not considered here

Monitoring and mitigating measures to reduce potential impacts of oil and gas exploration and development on bears in the Inuvik region

Energy Technology Data Exchange (ETDEWEB)

Branigan, M. [Government of the Northwest Territories, Inuvik, NT (Canada). Dept. of Environment and Natural Resources

2007-07-01

The Inuvik Region consists of the Northwest Territories portion of the Inuvialuit Settlement Region and the Gwich'in Settlement Area. The range of grizzly bears, polar bears and black bears extends to different parts of the region. The potential impact of development depends on the season of the development and the species of bear found in the footprint. As such, monitoring and mitigation measures should take this into consideration. This presentation focused on the potential impacts and current practices to monitor and mitigate the impacts in the region. Mitigation measures currently used include: communication with stakeholders; waste management guidelines; use of wildlife monitors to identify key habitat and den sites and to deter bears; minimum flight altitudes; and safety training. Suggestions for additional mitigation measures were also presented. figs.

Short-lived climate pollutant mitigation and the Sustainable Development Goals

Science.gov (United States)

Haines, Andy; Amann, Markus; Borgford-Parnell, Nathan; Leonard, Sunday; Kuylenstierna, Johan; Shindell, Drew

2017-12-01

The post-2015 development agenda is dominated by a set of Sustainable Development Goals (SDGs) that arose from the 2012 Rio+20 United Nations Conference on Sustainable Development. The 17 goals and 169 targets address diverse and intersecting aspects of human and environmental needs and challenges. Achieving the SDGs by 2030 requires implementing coordinated and concerted strategies and actions that minimize potential trade-offs and conflicts and maximize synergies to contribute to multiple SDGs. Measures to mitigate emissions of short-lived climate pollutants are an example of actions that contribute to multiple outcomes relevant to development. This Perspective highlights the interlinkages between these pollutants and the SDGs, and shows that implementing emissions reduction measures can contribute to achieving many of the SDGs.

CO{sub 2}-mitigation measures through reduction of fossil fuel burning in power utilities. Which road to go?

Energy Technology Data Exchange (ETDEWEB)

Kaupp, A. [Energetica International Inc., Suva (Fiji)

1996-12-31

Five conditions, at minimum, should be examined in the comparative analysis of CO{sub 2}-mitigation options for the power sector. Under the continuing constraint of scarce financial resources for any private or public investment in the power sector, the following combination of requirements characterise a successful CO{sub 2}-mitigation project: (1) Financial attractiveness for private or public investors. (2) Low, or even negative, long range marginal costs per ton of `CO{sub 2} saved`. (3) High impact on CO{sub 2}-mitigation, which indicates a large market potential for the measure. (4) The number of individual investments required to achieve the impact is relatively small. In other words, logistical difficulties in project implementation are minimised. (5) The projects are `socially fair` and have minimal negative impact on any segment of the society. This paper deals with options to reduce carbonaceous fuel burning in the power sector. Part I explains how projects should be selected and classified. Part II describes the technical options. Since reduction of carbonaceous fuel burning may be achieved through Demand Side Management (DSM) and Supply Side Management (SSM) both are treated. Within the context of this paper SSM does not mean to expand power supply as demand grows. It means to economically generate and distribute power as efficiently as possible. In too many instances DSM has degenerated into efficient lighting programs and utility managed incentives and rebate programs. To what extent this is a desirable situation for utilities in Developing Countries that face totally different problems as their counterparts in highly industrialised countries remains to be seen. Which road to go is the topic of this paper.

CO2 emissions and mitigation potential in China's ammonia industry

International Nuclear Information System (INIS)

Zhou Wenji; Zhu Bing; Li Qiang; Ma Tieju; Hu Shanying; Griffy-Brown, Charla

2010-01-01

Significant pressure from increasing CO 2 emissions and energy consumption in China's industrialization process has highlighted a need to understand and mitigate the sources of these emissions. Ammonia production, as one of the most important fundamental industries in China, represents those heavy industries that contribute largely to this sharp increasing trend. In the country with the largest population in the world, ammonia output has undergone fast growth spurred by increasing demand for fertilizer of food production since 1950s. However, various types of technologies implemented in the industry make ammonia plants in China operate with huge differences in both energy consumption and CO 2 emissions. With consideration of these unique features, this paper attempts to estimate the amount of CO 2 emission from China's ammonia production, and analyze the potential for carbon mitigation in the industry. Based on the estimation, related policy implications and measures required to realize the potential for mitigation are also discussed.

Albeni Falls Wildlife Mitigation : Annual Report 2002.

Energy Technology Data Exchange (ETDEWEB)

Terra-Berns, Mary

2003-01-01

The Albeni Falls Interagency Work Group continued to actively engage in implementing wildlife mitigation actions in 2002. Regular Work Group meetings were held to discuss budget concerns affecting the Albeni Falls Wildlife Mitigation Program, to present potential acquisition projects, and to discuss and evaluate other issues affecting the Work Group and Project. Work Group members protected 1,386.29 acres of wildlife habitat in 2002. To date, the Albeni Falls project has protected approximately 5,914.31 acres of wildlife habitat. About 21% of the total wildlife habitat lost has been mitigated. Administrative activities have increased as more properties are purchased and continue to center on restoration, operation and maintenance, and monitoring. In 2001, Work Group members focused on development of a monitoring and evaluation program as well as completion of site-specific management plans. This year the Work Group began implementation of the monitoring and evaluation program performing population and plant surveys, data evaluation and storage, and map development as well as developing management plans. Assuming that the current BPA budget restrictions will be lifted in the near future, the Work Group expects to increase mitigation properties this coming year with several potential projects.

Promoting interactions between local climate change mitigation, sustainable energy development, and rural development policies in Lithuania

International Nuclear Information System (INIS)

Streimikiene, Dalia; Baležentis, Tomas; Kriščiukaitienė, Irena

2012-01-01

Lithuania has developed several important climate change mitigation policy documents however there are no attempts in Lithuania to develop local climate change mitigation policies or to decentralize climate change mitigation policy. Seeking to achieve harmonization and decentralization of climate change mitigation and energy policies in Lithuania the framework for local climate change mitigation strategy need to be developed taking into account requirements, targets and measures set in national climate change mitigation and energy policy documents. The paper will describe how national climate change mitigation and energy policies can be implemented via local energy and climate change mitigation plans. The aim of the paper is to analyze the climate change mitigation policy and its relationship with policies promoting sustainable energy development in Lithuania and to present a framework for local approaches to climate change mitigation in Lithuania, in the context of the existing national and supra-national energy, climate change, and rural development policies. - Highlights: ► The framework for local energy action plans is offered. ► The structural support possibilities are assessed with respect to the Lithuanian legal base. ► The proposals are given for further promotion of sustainable energy at the local level.

Policies and Measures to Realise Industrial Energy Efficiency and Mitigate Climate Change

International Nuclear Information System (INIS)

Price, L.K.; McKane, A.T.; Ploutakhina, M.; Monga, P.; Gielen, D.; Bazilian, M.; Nussbaumer, P.; Howells, M.; Rogner, H.-H.

2009-01-01

The industrial sector is responsible for a significant share of global energy use and carbon dioxide (CO 2 ) emissions. Energy efficiency is commonly seen as the most cost-effective, least-polluting, and most readily-accessible industrial energy saving option available in the industrial sector worldwide. Capturing the full extent of these potential end-use energy efficiency improvements rapidly is essential if the world is to be on a path to stabilise greenhouse gas (GHG) concentrations to a level that would prevent dangerous anthropogenic interference with the climate system. In the International Energy Agency (IEA) 450 parts per million stabilisation scenario, over a quarter of all energy efficiency gains need to come from the industrial sector by 2050, largely by changing the pattern of industrial energy use. The reduction potential estimated by IEA and the Intergovernmental Panel on Climate Change (IPCC) for five energy-intensive industrial sub-sectors ranges from about 10 to 40 per cent, depending upon the sector. There is significant potential to reduce, at low or no cost, the amount of energy used to manufacture most commodities. Many policies and programmes - at a national level - have already demonstrated significant improvements in industrial energy efficiency. The associate reduction in energy needs often also improves economic competitiveness as well as mitigates GHG emissions. However, at an international level, approaches such as the Clean Development Mechanism (CDM) are not yet delivering the expected energy efficiency improvements. Existing and effective industrial energy efficiency policies and measures could be replicated at a global level. Key elements of those policies and measures include increasing facility management attention to the issue of energy efficiency; promoting the dissemination of information, practice, and tools; increasing the auditing and implementation capacity; and developing the market for industrial energy efficiency

A conceptual framework to analyze and mitigate aging effects of a system in nuclear power plants

International Nuclear Information System (INIS)

Ahmed, S.

1985-01-01

A conceptual framework is developed to analyze, characterize, and mitigate the degradation of a system in a nuclear power plant due to aging. The system is evaluated, based on an aging-specific system decision model, to understand and implement decisions pertaining to surveillance, maintenance, and replacement. Decisions on other corrective measures to mitigate the effects of aging of a number of equipment items, interconnections (relationships with other systems), and interfaces (relationships within the system) can also be made based on the proposed approach

Mitigation of eutrophication in river basins, lakes, and coastal waters requires and integrated and adaptive approach; experiences from The Netherlands.

Science.gov (United States)

Rozemeijer, J.; Jansen, S.; Villars, N.; Grift, B. V. D.

2017-12-01

We propose a guideline for mitigation of eutrophication in river basins, lakes, and coastal waters. The proposed strategy is based on our experiences with implementation of manure legislation and the Water Framework Directive (WFD) in Europe. These regulations led to reduced nutrient losses from highly productive agricultural areas. For example in The Netherlands, the worldwide second largest exporter of agricultural products, nutrient concentrations in agricultural headwaters reduced since the early 1990's. Our guideline builds on three basic principles: (1) a conceptual framework integrating water quality, water quantity, soil, groundwater, and surface water, (2) the `from catchment to coast' approach for up-scaling field-scale pilot results to downstream ecological effects, and (3) a mitigation order of preference from (a) optimizing nutrient uptake efficiency to (b) enhancing nutrient retention and recirculation to (c) nutrient discharge and applying effect oriented measures. The tools needed to mitigate eutrophication are system understanding, smart monitoring, smart modelling, smart measures, and smart governance. Following these principles and using these tools enables an integrated, adaptive approach for selecting, implementing, and evaluating the most cost-effective and sustainable set of mitigation actions.

Alternative energy balances for Bulgaria to mitigate climate change

Science.gov (United States)

Christov, Christo

1996-01-01

Alternative energy balances aimed to mitigate greenhouse gas (GHG) emissions are developed as alternatives to the baseline energy balance. The section of mitigation options is based on the results of the GHG emission inventory for the 1987 1992 period. The energy sector is the main contributor to the total CO2 emissions of Bulgaria. Stationary combustion for heat and electricity production as well as direct end-use combustion amounts to 80% of the total emissions. The parts of the energy network that could have the biggest influence on GHG emission reduction are identified. The potential effects of the following mitigation measures are discussed: rehabilitation of the combustion facilities currently in operation; repowering to natural gas; reduction of losses in thermal and electrical transmission and distribution networks; penetration of new combustion technologies; tariff structure improvement; renewable sources for electricity and heat production; wasteheat utilization; and supply of households with natural gas to substitute for electricity in space heating and cooking. The total available and the achievable potentials are estimated and the implementation barriers are discussed.

Mitigating the Impact of Nurse Manager Large Spans of Control.

Science.gov (United States)

Simpson, Brenda Baird; Dearmon, Valorie; Graves, Rebecca

Nurse managers are instrumental in achievement of organizational and unit performance goals. Greater spans of control for managers are associated with decreased satisfaction and performance. An interprofessional team measured one organization's nurse manager span of control, providing administrative assistant support and transformational leadership development to nurse managers with the largest spans of control. Nurse manager satisfaction and transformational leadership competency significantly improved following the implementation of large span of control mitigation strategies.

Disaster Characteristics and Mitigation Measures of Huge Glacial Debris Flows along the Sichuan-Tibet Railway

Science.gov (United States)

Liu, Jinfeng; You, Yong; Zhang, Guangze; Wang, Dong; Chen, Jiangang; Chen, Huayong

2017-04-01

The Ranwu-Tongmai section of the Sichuan-Tibet Railway passes through the Palongzangbu River basin which locates in the southeast Qinghai-Tibetan Plateau. Due to widely distributed maritime glacier in this area, the huge glacier debris flows are very developed. Consequently, the disastrous glacier debris flows with huge scale (106-108 m3 for one debris flow event) and damage become one of the key influencing factors for the route alignment of the Sichuan-Tibet Railway. The research on disaster characteristics and mitigation measures of huge glacial debris flows in the study area were conducted by the remote sensing interpretation, field investigation, parameter calculation and numerical simulation. Firstly, the distribution of the glaciers, glacier lakes and glacier debris flows were identified and classified; and the disaster characteristics for the huge glacier debris flow were analyzed and summarized. Secondly, the dynamic parameters including the flood peak discharge, debris flow peak discharge, velocity, total volume of a single debris flow event were calculated. Based on the disaster characteristics and the spatial relation with the railway, some mitigation principles and measures were proposed. Finally, the Guxiang Gully, where a huge glacier debris flow with 2*108m3 in volume occurred in 1953, was selected as a typical case to analyze its disaster characteristics and mitigation measures. The interpretation results show that the glacier area is about 970 km2 which accounts for 19% of the total study area. 130 glacier lakes and 102 glacier debris flows were identified and classified. The Sichuan-Tibet Railway passes through 43 glacier debris flows in the study area. The specific disaster characteristics were analyzed and corresponding mitigation measures were proposed for the route selection of the railway. For the Guxiang Gully, a numerical simulation to simulate the deposition condition at the alluvial fan was conducted. the simulation results show that the

Fish habitat mitigation measures for hydrotechnical projects

International Nuclear Information System (INIS)

McPhail, G.D.; MacMillan, D.B.; Katopodis, C.

1992-01-01

In recent years, the identification and mitigation of environmental impacts of hydrotechnical projects, particularly on fish and fish habitats, have become a major component of project planning and design. Potential impacts to fish and fish habitat may include increased fish mortality, decreased species diversity, and loss or decreases in fish production due to loss of habitat or alteration of its suitability. These impacts arise from flooding of riverine habitat, alteration of flow quantity and distribution, changes in morphology, and alteration of water quality, including suspended sediments, temperature, dissolved oxygen, and mercury. The results of a study for the Canadian Federal Department of Fisheries and Oceans Central and Arctic Region, examining fish habitat mitigation techniques for their applicability to hydrotechnical projects in Canada are summarized. The requirements for achievement and verification of the no net loss policy for a project are discussed. 10 refs., 2 tabs

Mitigating the surface urban heat island: Mechanism study and sensitivity analysis

Science.gov (United States)

Meng, Chunlei

2017-08-01

In a surface urban heat island (SUHI), the urban land surface temperature (LST) is usually higher than the temperature of the surrounding rural areas due to human activities and surface characteristics. Because a SUHI has many adverse impacts on urban environment and human health, SUHI mitigation strategies are very important. This paper investigates the mechanism of a SUHI based on the basic physical laws that control the formation of a SUHI; five mitigation strategies are proposed, namely: sprinkling and watering; paving a pervious surface; reducing the anthropogenic heat (AH) release; using a "white roof"; increasing the fractional vegetation cover or leaf area index (LAI). To quantify the effect of these mitigation strategies, 26 sets of experiments are designed and implemented by running the integrated urban land model (IUM). The results of the sensitivity analysis indicate that sprinkling and watering is an effective measure for mitigating a SUHI for an entire day. Decreasing the AH release is also useful for both night- and daytime SUHI mitigation; however, the cooling extent is proportional to the diurnal cycle of AH. Increasing the albedo can reduce the LST in the daytime, especially when the solar radiation is significant; the cooling extent is approximately proportional to the diurnal cycle of the net radiation. Increasing the pervious surface percentage can mitigate the SUHI especially in the daytime. Increasing the fractional vegetation cover can mitigate the SUHI in the daytime but may aggravate the SUHI at night.

Radon mitigation in schools

International Nuclear Information System (INIS)

Saum, D.; Craig, A.B.; Leovic, K.

1990-01-01

Since 1987, more than 40 schools in Maryland, Virginia, Tennessee and North Carolina were visited by the U.S. Environmental Protection Agency (EPA). School characteristics that potentially influence radon entry and impact mitigation system design and performance were identified. Mitigation systems that had proven successful in house mitigation were then installed in several of these schools. Many of the systems were installed by school personnel with some assistance from EPA and an experienced radon diagnostician. This article presents the diagnostic measurements made in the schools and it discusses in detail the specific mitigation systems that were installed in four Maryland schools by the EPA

Implementation of DoS attack and mitigation strategies in IEEE 802.11b/g WLAN

Science.gov (United States)

Deng, Julia; Meng, Ke; Xiao, Yang; Xu, Roger

2010-04-01

IEEE 802.11 wireless Local Area Network (WLAN) becomes very prevalent nowadays. Either as a simple range extender for a home wired Ethernet interface, or as a wireless deployment throughout an enterprise, WLAN provides mobility, convenience, and low cost. However, an IEEE 802.11b/g wireless network uses the frequency of unlicensed 2.4GHz, which makes the network unsafe and more vulnerable than traditional Ethernet networks. As a result, anyone who is familiar with wireless network may initiate a Denial of Service (DoS) attack to influence the common communication of the network or even make it crash. In this paper, we present our studies on the DoS attacks and mitigation strategies for IEEE 802.11b/g WLANs and describe some initial implementations using IEEE 802.11b/g wireless devices.

Reforestation and Climate Change Mitigation. A background Study for Joint Implementation in China and Indonesia

Energy Technology Data Exchange (ETDEWEB)

Gan, Lin; Naess, Lars Otto; Kasa, Sjur; O` Brien, Karen L

1998-12-01

This report studies the importance of institutional barriers in promoting reforestation as a means of mitigating global climate change. It is argued that cost-effective implementation of reforestation depends on proper institutional settings in host countries. Particular emphasis is placed on the role of property rights. The relationship between various stakeholders, such as governments, non-governmental organisations, the private sector, and international aid agencies is analysed. Discussed aspects include conflicts among stakeholders, long-term security or stability of property rights regimes, distribution of property rights, and information exchange. The forest situation in China and Indonesia is used as an example. The study outlines a number of conflicts in the property rights regime that need a better understanding. Some important issues that need further study are listed. 66 refs., 1 fig., 2 tabs.

The links between implementing ISA 540 and mitigating the practice of smoothing reported net earnings using write-offs of accounts receivable and inventory by reporting entities in Poland

Directory of Open Access Journals (Sweden)

Andrzej Krystian Piosik

2016-06-01

Full Text Available The paper addresses the question of the links between implementing ISA 540 and mitigating the practice of smoothing reported net earnings using write-offs of accounts receivable and inventory by reporting entities in Poland. The research question stems from the previous analysis carried out by the author in which evidence was provided that reporting entities in Poland in the period 2000–2010 effectively used write-offs of accounts receivable and inventory in order to mitigate fluctuations of reported net earnings. This paper provides evidence that before implementing ISA 540 reporting entities used write-offs of receivables and inventory for income smoothing in effective manner, however in the period after implementing the standard (2009–2014 no link was observed between the write-offs and reduced fluctuations of reported net earnings. The research has been carried out using Wilcoxon signed-rank test used to check equality of medians of mean deviations of net earnings before write-offs of receivables and inventory and mean deviations of net earnings after write-offs. For the period before implementing ISA 540 there are grounds to reject the hypothesis of equality of medians of mean deviations of net earnings, however in the post-adoption period there is no justification to reject the hypothesis of equality of medians. The research provides evidence of positive impact of ISA 540 mitigating the processes of accounting earnings management. The indicated regularity does not apply to banks, because within this group of companies we have not observed the use of write-offs of loan receivables in order to reduce the variability of net earnings before implementing ISA 540 and in the period following the implementation of the standard.

Efficiency of mitigation measures to reduce particulate air pollution--a case study during the Olympic Summer Games 2008 in Beijing, China.

Science.gov (United States)

Schleicher, Nina; Norra, Stefan; Chen, Yizhen; Chai, Fahe; Wang, Shulan

2012-06-15

Atmospheric particles were studied before, during, and after the period of the Olympic Summer Games in Beijing, China, in August 2008 in order to investigate the efficiency of the mitigation measures implemented by the Chinese Government. Total suspended particles (TSP) and fine particles (PM(2.5) and PM(1)) were collected continuously from October 2007 to February 2009 and were analyzed in detail with regard to mass and element concentrations, water-soluble ions, and black carbon (BC). Mass as well as element concentrations during the Olympic air quality control period were lower than the respective concentrations during the time directly before and after the Olympic Games. The results showed that the applied aerosol source control measures, such as shutting down industries and reducing traffic, had a huge impact on the reduction of aerosol pollution in Beijing. However, the meteorological conditions, especially rainfall, certainly also contributed to the successful reduction of particulate air pollution. Coarse particles were reduced more efficiently than finer particles, which indicates that long-range transport of atmospheric particles is difficult to control and that presumably the established mitigation area was not large enough. The study further showed that elements from predominantly anthropogenic sources, such as S, Cu, As, Cd, and Pb, as well as BC, were reduced more efficiently during the Olympic Games than elements for which geogenic sources are more significant, such as Al, Fe, Rb or Sr. Furthermore, the mentioned anthropogenic element concentrations were reduced more in the finer PM(2.5) samples whereas geogenic ones were reduced stronger in TSP samples including the coarser fraction. Consequently, it can be assumed that the mitigation measures, as intended, were successful in reducing more toxic and health-relevant particles from anthropogenic sources. Firework displays, especially at the Opening Ceremony, could be identified as a special short

44 CFR 201.5 - Enhanced State Mitigation Plans.

Science.gov (United States)

2010-10-01

... to State and regional agencies. (2) Documentation of the State's project implementation capability, identifying and demonstrating the ability to implement the plan, including: (i) Established eligibility...) Demonstration that the State has the capability to effectively manage the HMGP as well as other mitigation grant...

Mitigation for the Construction and Operation of Libby Dam, 2004-2005 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Dunnigan, James; DeShazer, Jay; Garrow, Larry (Montana Department of Fish, Wildlife and Parks, Libby, MT)

2005-06-01

''Mitigation for the Construction and Operation of Libby Dam'' is part of the Northwest Power and Conservation Council's (NPCC) resident fish and wildlife program. The program was mandated by the Northwest Planning Act of 1980, and is responsible for mitigating damages to fish and wildlife caused by hydroelectric development in the Columbia River Basin. The objective of Phase I of the project (1983 through 1987) was to maintain or enhance the Libby Reservoir fishery by quantifying seasonal water levels and developing ecologically sound operational guidelines. The objective of Phase II of the project (1988 through 1996) was to determine the biological effects of reservoir operations combined with biotic changes associated with an aging reservoir. The objectives of Phase III of the project (1996 through present) are to implement habitat enhancement measures to mitigate for dam effects, to provide data for implementation of operational strategies that benefit resident fish, monitor reservoir and river conditions, and monitor mitigation projects for effectiveness. This project completes urgent and high priority mitigation actions as directed by the Kootenai Subbasin Plan. Montana Fish, Wildlife & Parks (MFWP) uses a combination of techniques to collect physical and biological data within the Kootenai River Basin. These data serve several purposes including: the development and refinement of models used in management of water resources and operation of Libby Dam; investigations into the limiting factors of native fish populations, gathering basic life history information, tracking trends in endangered and threatened species, and the assessment of restoration or management activities designed to restore native fishes and their habitats.

Mitigation for the Construction and Operation of Libby Dam, 2003-2004 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Dunnigan, James; DeShazer, Jay; Garrow, Larry (Montana Department of Fish, Wildlife and Parks, Libby, MT)

2004-06-01

''Mitigation for the Construction and Operation of Libby Dam'' is part of the Northwest Power and Conservation Council's (NPCC) resident fish and wildlife program. The program was mandated by the Northwest Planning Act of 1980, and is responsible for mitigating for damages to fish and wildlife caused by hydroelectric development in the Columbia River Basin. The objective of Phase I of the project (1983 through 1987) was to maintain or enhance the Libby Reservoir fishery by quantifying seasonal water levels and developing ecologically sound operational guidelines. The objective of Phase II of the project (1988 through 1996) was to determine the biological effects of reservoir operations combined with biotic changes associated with an aging reservoir. The objectives of Phase III of the project (1996 through present) are to implement habitat enhancement measures to mitigate for dam effects, to provide data for implementation of operational strategies that benefit resident fish, monitor reservoir and river conditions, and monitor mitigation projects for effectiveness. This project completes urgent and high priority mitigation actions as directed by the Kootenai Subbasin Plan. Montana FWP uses a combination of diverse techniques to collect a variety of physical and biological data within the Kootenai River Basin. These data serve several purposes including: the development and refinement of models used in management of water resources and operation of Libby Dam; investigations into the limiting factors of native fish populations, gathering basic life history information, tracking trends in endangered, threatened species, and the assessment of restoration or management activities intended to restore native fishes and their habitats.

78 FR 78310 - Approval and Promulgation of Implementation Plans; North Carolina; Transportation Conformity...

Science.gov (United States)

2013-12-26

...] Approval and Promulgation of Implementation Plans; North Carolina; Transportation Conformity Memorandum of... Resources. This submission adopts a memorandum of agreement establishing transportation conformity criteria...-related control measures and mitigation measures. This proposed action streamlines the conformity process...

The meaning and measurement of implementation climate

Science.gov (United States)

2011-01-01

Background Climate has a long history in organizational studies, but few theoretical models integrate the complex effects of climate during innovation implementation. In 1996, a theoretical model was proposed that organizations could develop a positive climate for implementation by making use of various policies and practices that promote organizational members' means, motives, and opportunities for innovation use. The model proposes that implementation climate--or the extent to which organizational members perceive that innovation use is expected, supported, and rewarded--is positively associated with implementation effectiveness. The implementation climate construct holds significant promise for advancing scientific knowledge about the organizational determinants of innovation implementation. However, the construct has not received sufficient scholarly attention, despite numerous citations in the scientific literature. In this article, we clarify the meaning of implementation climate, discuss several measurement issues, and propose guidelines for empirical study. Discussion Implementation climate differs from constructs such as organizational climate, culture, or context in two important respects: first, it has a strategic focus (implementation), and second, it is innovation-specific. Measuring implementation climate is challenging because the construct operates at the organizational level, but requires the collection of multi-dimensional perceptual data from many expected innovation users within an organization. In order to avoid problems with construct validity, assessments of within-group agreement of implementation climate measures must be carefully considered. Implementation climate implies a high degree of within-group agreement in climate perceptions. However, researchers might find it useful to distinguish implementation climate level (the average of implementation climate perceptions) from implementation climate strength (the variability of

The meaning and measurement of implementation climate

Directory of Open Access Journals (Sweden)

Bergmire Dawn M

2011-07-01

Full Text Available Abstract Background Climate has a long history in organizational studies, but few theoretical models integrate the complex effects of climate during innovation implementation. In 1996, a theoretical model was proposed that organizations could develop a positive climate for implementation by making use of various policies and practices that promote organizational members' means, motives, and opportunities for innovation use. The model proposes that implementation climate--or the extent to which organizational members perceive that innovation use is expected, supported, and rewarded--is positively associated with implementation effectiveness. The implementation climate construct holds significant promise for advancing scientific knowledge about the organizational determinants of innovation implementation. However, the construct has not received sufficient scholarly attention, despite numerous citations in the scientific literature. In this article, we clarify the meaning of implementation climate, discuss several measurement issues, and propose guidelines for empirical study. Discussion Implementation climate differs from constructs such as organizational climate, culture, or context in two important respects: first, it has a strategic focus (implementation, and second, it is innovation-specific. Measuring implementation climate is challenging because the construct operates at the organizational level, but requires the collection of multi-dimensional perceptual data from many expected innovation users within an organization. In order to avoid problems with construct validity, assessments of within-group agreement of implementation climate measures must be carefully considered. Implementation climate implies a high degree of within-group agreement in climate perceptions. However, researchers might find it useful to distinguish implementation climate level (the average of implementation climate perceptions from implementation climate strength (the

Wildlife Mitigation Program. Record of Decision

International Nuclear Information System (INIS)

1997-06-01

Bonneville Power Administration (BPA) has decided to adopt a set of Descriptions (goals, strategies, and procedural requirements) that apply to future BPA-funded wildlife mitigation projects. Various. sources-including Indian tribes, state agencies, property owners, private conservation groups, or other Federal agencies-propose wildlife mitigation projects to the Northwest Power Planning Council (Council) for BPA funding. Following independent scientific and public reviews, Council then selects projects to recommend for BPA funding. BPA adopts this set of prescriptions to standardize the planning and implementation of individual wildlife mitigation projects. This decision is based on consideration of potential environmental impacts evaluated in BPA's Wildlife Mitigation Program Final Environmental Impact Statement (DOE/EIS-0246) published March, 20, 1997, and filed with the Environmental Protection Agency (EPA) the week of March 24, 1997 (EPA Notice of Availability Published April 4, 1997, 62 FR 65, 16154). BPA will distribute this Record of Decision to all known interested and affected persons, groups, tribes, and agencies

Core Flight Executive Software Radiation Mitigation Study

Data.gov (United States)

National Aeronautics and Space Administration — The reliability of SmallSat / CubeSat missions may be increased by using software radiation mitigation for single event upsets (SEUs). Implementing protection in...

Implementing Local Climate Change Adaptation and Mitigation Actions: The Role of Various Policy Instruments in a Multi-Level Governance Context

Directory of Open Access Journals (Sweden)

E. Carina H. Keskitalo

2016-01-01

Full Text Available Recently, considerable focus, e.g., in the fifth IPCC (Intergovernmental Panel on Climate Change Assessment Report (2014 has been trained on why adaptation and mitigation have not been developed more than at present, with relatively few local government actions taken compared with, for example, more discursive policy agreement on the importance of the issue of climate change. Going beyond a focus on general limits and barriers, this comment suggests that one important issue is that climate change has not yet been sufficiently integrated into the state regulative structure of legislation and policy-making. A comparison between three cases suggests that local developments that are not supported in particular by binding regulation are unlikely to achieve the same general level of implementation as issues for which such regulative demands (and thereby also requirements for prioritization exist. This constitutes an important consideration for the development of adaptation and mitigation as policy areas, including on the local level.

Hypothesis-driven and field-validated method to prioritize fragmentation mitigation efforts in road projects.

Science.gov (United States)

Vanthomme, Hadrien; Kolowski, Joseph; Nzamba, Brave S; Alonso, Alfonso

2015-10-01

The active field of connectivity conservation has provided numerous methods to identify wildlife corridors with the aim of reducing the ecological effect of fragmentation. Nevertheless, these methods often rely on untested hypotheses of animal movements, usually fail to generate fine-scale predictions of road crossing sites, and do not allow managers to prioritize crossing sites for implementing road fragmentation mitigation measures. We propose a new method that addresses these limitations. We illustrate this method with data from southwestern Gabon (central Africa). We used stratified random transect surveys conducted in two seasons to model the distribution of African forest elephant (Loxodonta cyclotis), forest buffalo (Syncerus caffer nanus), and sitatunga (Tragelaphus spekii) in a mosaic landscape along a 38.5 km unpaved road scheduled for paving. Using a validation data set of recorded crossing locations, we evaluated the performance of three types of models (local suitability, local least-cost movement, and regional least-cost movement) in predicting actual road crossings for each species, and developed a unique and flexible scoring method for prioritizing road sections for the implementation of road fragmentation mitigation measures. With a data set collected in method was able to identify seasonal changes in animal movements for buffalo and sitatunga that shift from a local exploitation of the site in the wet season to movements through the study site in the dry season, whereas elephants use the entire study area in both seasons. These three species highlighted the need to use species- and season-specific modeling of movement. From these movement models, the method ranked road sections for their suitability for implementing fragmentation mitigation efforts, allowing managers to adjust priority thresholds based on budgets and management goals. The method relies on data that can be obtained in a period compatible with environmental impact assessment

Idaho Habitat Evaluation for Off-Site Mitigation Record : Annual Report 1987.

Energy Technology Data Exchange (ETDEWEB)

Petrosky, Charles E.; Holubetz, Terry B. (Idaho Dept. of Fish and Game, Boise, ID (USA)

1988-04-01

The Idaho Department of Fish and Game has been monitoring and evaluating existing and proposed habitat improvement projects for steelhead (Salmo gairdneri) and chinook salmon (Oncorhynchus tshawytscha) in the Clearwater and Salmon River drainages over the last four years. Projects included in the evaluation are funded by, or proposed for funding by, the Bonneville Power Administration (BPA) under the Northwest Power Planning Act as off-site mitigation for downstream hydropower development on the Snake and Columbia rivers. A mitigation record is being developed to use increased smolt production at full seeding as the best measure of benefit from a habitat enhancement project. Determination of full benefit from a project depends on presence of adequate numbers of fish to document actual increases in fish production. The depressed nature of upriver anadromous stocks have precluded attainment of full benefit of any habitat project in Idaho. Partial benefit will be credited to the mitigation record in the interim period of run restoration. According to the BPA Work Plan, project implementors have the primary responsibility for measuring physical habitat and estimating habitat change. To date, Idaho habitat projects have been implemented primarily by the US Forest Service (USFS). The Shoshone-Bannock Tribes (SBT) have sponsored three projects (Bear Valley Mine, Yankee Fork, and the proposed East Fork Salmon River projects). IDFG implemented two barrier-removal projects (Johnson Creek and Boulder Creek) that the USFS was unable to sponsor at that time. The role of IDFG in physical habitat monitoring is primarily to link habitat quality and habitat change to changes in actual, or potential, fish production. Individual papers were processed separately for the data base.

Global Air Quality and Health Co-benefits of Mitigating Near-term Climate Change Through Methane and Black Carbon Emission Controls

Science.gov (United States)

Anenberg, Susan C.; Schwartz, Joel; Shindell, Drew Todd; Amann, Markus; Faluvegi, Gregory S.; Klimont, Zbigniew; Janssens-Maenhout, Greet; Pozzoli, Luca; Dingenen, Rita Van; Vignati, Elisabetta;

Mitigating Infectious Disease Outbreaks

Science.gov (United States)

Davey, Victoria

The emergence of new, transmissible infections poses a significant threat to human populations. As the 2009 novel influenza A/H1N1 pandemic and the 2014-2015 Ebola epidemic demonstrate, we have observed the effects of rapid spread of illness in non-immune populations and experienced disturbing uncertainty about future potential for human suffering and societal disruption. Clinical and epidemiologic characteristics of a newly emerged infectious organism are usually gathered in retrospect as the outbreak evolves and affects populations. Knowledge of potential effects of outbreaks and epidemics and most importantly, mitigation at community, regional, national and global levels is needed to inform policy that will prepare and protect people. Study of possible outcomes of evolving epidemics and application of mitigation strategies is not possible in observational or experimental research designs, but computational modeling allows conduct of `virtual' experiments. Results of well-designed computer simulations can aid in the selection and implementation of strategies that limit illness and death, and maintain systems of healthcare and other critical resources that are vital to public protection. Mitigating Infectious Disease Outbreaks.

How best to measure implementation of school health curricula: a comparison of three measures.

Science.gov (United States)

Resnicow, K; Davis, M; Smith, M; Lazarus-Yaroch, A; Baranowski, T; Baranowski, J; Doyle, C; Wang, D T

1998-06-01

The impact of school health education programs is often attenuated by inadequate teacher implementation. Using data from a school-based nutrition education program delivered in a sample of fifth graders, this study examines the discriminant and predictive validity of three measures of curriculum implementation: class-room observation of fidelity, and two measures of completeness, teacher self-report questionnaire and post-implementation interview. A fourth measure, obtained during teacher observations, that assessed student and teacher interaction and student receptivity to the curriculum (labeled Rapport) was also obtained. Predictive validity was determined by examining the association of implementation measures with three study outcomes; health knowledge, asking behaviors related to fruit and vegetables, and fruit and vegetable intake, assessed by 7-day diary. Of the 37 teachers observed, 21 were observed for two sessions and 16 were observed once. Implementation measures were moderately correlated, an indication of discriminant validity. Predictive validity analyses indicated that the observed fidelity, Rapport and interview measures were significantly correlated with post-test student knowledge. The association between health knowledge and observed fidelity (based on dual observation only), Rapport and interview measures remained significant after adjustment for pre-test knowledge values. None of the implementation variables were significantly associated with student fruit and vegetable intake or asking behaviors controlling for pre-test values. These results indicate that the teacher self-report questionnaire was not a valid measure of implementation completeness in this study. Post-implementation completeness interviews and dual observations of fidelity and Rapport appear to be more valid, and largely independent methods of implementation assessment.

MISSIONS: The Mobile-Based Disaster Mitigation System in Indonesia

Science.gov (United States)

Passarella, Rossi; Putri Raflesia, Sarifah; Lestarini, Dinda; Rifai, Ahmad; Veny, Harumi

2018-04-01

Disaster mitigation is essential to minimize the effects of disasters. Indonesia is one of the disaster prone areas in Asia and the government explores the usage of Information technology (IT) to aid its mitigation efforts. Currently, there are Indonesian websites which hold information regarding the weather monitoring, climate conditions, and geophysics. But, there is no clear indicator of mitigation efforts or things to do during an emergency. Therefore, this research proposed MISSIONS, a disaster mitigation model using geo-fencing technique to detect the location of the users through their mobile devices. MISSIONS uses mobile-based disaster mitigation system as a way to disseminate critical information to victims during emergency when they are in disaster zones using virtual fences. It aims to help the government to reduce the effects of disaster and aid in the mitigation efforts. The implementation result shows that MISSIONS have a high accuracy in detecting user whereabouts.

Assessment of indirect losses and costs of emergency for project planning of alpine hazard mitigation

Science.gov (United States)

Amenda, Lisa; Pfurtscheller, Clemens

2013-04-01

By virtue of augmented settling in hazardous areas and increased asset values, natural disasters such as floods, landslides and rockfalls cause high economic losses in Alpine lateral valleys. Especially in small municipalities, indirect losses, mainly stemming from a breakdown of transport networks, and costs of emergency can reach critical levels. A quantification of these losses is necessary to estimate the worthiness of mitigation measures, to determine the appropriate level of disaster assistance and to improve risk management strategies. There are comprehensive approaches available for assessing direct losses. However, indirect losses and costs of emergency are widely not assessed and the empirical basis for estimating these costs is weak. To address the resulting uncertainties of project appraisals, a standardized methodology has been developed dealing with issues of local economic effects and emergency efforts needed. In our approach, the cost-benefit-analysis for technical mitigation of the Austrian Torrent and Avalanche Control (TAC) will be optimized and extended using the 2005-debris flow as a design event, which struggled a small town in the upper Inn valley in southwest Tyrol (Austria). Thereby, 84 buildings were affected, 430 people were evacuated and due to this, the TAC implemented protection measures for 3.75 million Euros. Upgrading the method of the TAC and analyzing to what extent the cost-benefit-ratio is about to change, is one of the main objectives of this study. For estimating short-run indirect effects and costs of emergency on the local level, data was collected via questionnaires, field mapping, guided interviews, as well as intense literature research. According to this, up-to-date calculation methods were evolved and the cost-benefit-analysis of TAC was recalculated with these new-implemented results. The cost-benefit-ratio will be more precise and specific and hence, the decision, which mitigation alternative will be carried out

Creating Stakeholder Value through Risk Mitigation Measures in the Context of Disaster Management

Directory of Open Access Journals (Sweden)

Minna Räikkönen

2017-10-01

Full Text Available The resilience of critical infrastructure (CI to extreme weather events (EWE is one of the most demanding challenges for all stakeholders in modern society. Although partial risk reduction is feasible through the introduction and implementation of various risk mitigation measures (RMM, decision-makers at all decision-making levels are pressured to find ways to cope with the impending extreme weather and to have a thorough understanding of the EWE impacts on CI. This paper discusses how the value of RMMs can be created and assessed in a stakeholder network. Qualitative research methods, namely literature review and AHP (Analytic Hierarchy Process, were applied as research methods. The paper examines how disaster management and value creation both converge and differ from each other. It also presents a case study on the value of various RMM and the impacts of extreme winter conditions on electricity distribution in Finland. Based on the case study, the most important value criterion was the benefits of the RMM in economic, social, and environmental terms. At a fundamental level, the value of RMM should be expressed not only in terms of money but also in regard to safety, security, societal acceptability, CI dependability, and other typically intangible criteria. Moreover, the results reveal that the interrelationship of value creation and disaster management offers new insights to both approaches.

Review of selected state-of-the-art applications of diagnostic measurements for radon-mitigation planning. Report for April 1986-June 1987

International Nuclear Information System (INIS)

Hubbard, L.M.; Harrje, D.T.; Gadsby, K.J.; Sanchez, D.C.; Turk, B.H.

1987-09-01

Since late-1984, EPA's AEERL has supported a program to develop and demonstrate radon-mitigation techniques for single-family detached dwellings. As part of the program, projects have been started, directed at developing and demonstrating the use of diagnostic measurements in all phases of the radon-mitigation process. Diagnostic measurements are used to assess: (1) the radon sources strengths, variability, and locations; and, (2) radon transport to the house and its entry and distribution in the house as influenced by environmental, house characteristics, and occupancy factors. The diagnostic measurements reported include: (1) soil-gas grab sampling; (2) communication (air flow or pressure-field extension) tests; (3) whole house infiltration; (4) differential pressure, (5) gamma radiation; and, (6) radon flux. The paper concludes that the above selected diagnostic measurements were especially useful in characterizing houses with indoor radon problems attributable to soil-gas-borne radon that may be amenable to mitigation through the use of subslab ventilation

Mitigation and prediction of disruption on the HL-2A Tokamak

International Nuclear Information System (INIS)

Yong-Zhen, Zheng; Ying, Qiu; Peng, Zhang; Yuan, Huang; Zheng-Ying, Cui; Ping, Sun; Qing-Wei, Yang

2009-01-01

Injection of high-Z impurities into plasma has been proved to be able to reduce the localized thermal load and mechanical forces on the in-vessel components and the vacuum vessel, caused by disruptions in Tokamaks. An advanced prediction and mitigation system of disruption is implemented in HL-2A to safely shut down plasmas by using the laser ablation of high-Z impurities with a perturbation real-time measuring and processing system. The injection is usually triggered by the amplitude and frequency of the MHD perturbation field which is detected with a Mirnov coil and leads to the onset of a mitigated disruption within a few milliseconds. It could be a simple and potential approach to significantly reducing the plasma thermal energy and magnetic energy before a disruption, thereby achieving safe plasma termination. The plasma response to impurity injection, a mechanism for improving plasma thermal and current quench in major disruptions, the design of the disruption prediction warner, and an evaluation of the mitigation success rate are discussed in the present paper. (fluids, plasmas and electric discharges)

Overview of mitigation policies and measures in the forestry sector

Energy Technology Data Exchange (ETDEWEB)

Sathaye, J. [Lawrence Berkeley National Lab., CA (United States)

1996-12-31

In this paper the author addresses questions on how the forestry sector can make a contribution to the general problem of greenhouse gases in the environment. Primarily this is in the form of carbon conservation and sequestering. There is a potential land area for conservation and sequestration estimated to be 700 Mha. The total carbon that could be sequestered and conserved globally by 2050 on this land is 60 - 87 GtC. Slowing deforestation, assisting regeneration, forestation and agroforestry are the primary mitigation measures for carbon conservation and sequestration. For long term success, enforcement to halt deforestation has to be accompained by economic and/or other benefits to the deforesters that equal or exceed their current remuneration. Making plantations a significant fuel for utility electricity generation will require higher biomass yields and thermal efficiency matching that of conventional plants. Significant reduction of global carbon emissions requires national governments to institute measures that provide local, national, economic and other benefits while conserving and sequestering carbon.

Can control of soil erosion mitigate water pollution by sediments?

Science.gov (United States)

Rickson, R J

2014-01-15

The detrimental impact of sediment and associated pollutants on water quality is widely acknowledged, with many watercourses in the UK failing to meet the standard of 'good ecological status'. Catchment sediment budgets show that hill slope erosion processes can be significant sources of waterborne sediment, with rates of erosion likely to increase given predicted future weather patterns. However, linking on-site erosion rates with off-site impacts is complicated because of the limited data on soil erosion rates in the UK and the dynamic nature of the source-pathway-receptor continuum over space and time. Even so, soil erosion control measures are designed to reduce sediment production (source) and mobilisation/transport (pathway) on hill slopes, with consequent mitigation of pollution incidents in watercourses (receptors). The purpose of this paper is to review the scientific evidence of the effectiveness of erosion control measures used in the UK to reduce sediment loads of hill slope origin in watercourses. Although over 73 soil erosion mitigation measures have been identified from the literature, empirical data on erosion control effectiveness are limited. Baseline comparisons for the 18 measures where data do exist reveal erosion control effectiveness is highly variable over time and between study locations. Given the limitations of the evidence base in terms of geographical coverage and duration of monitoring, performance of the different measures cannot be extrapolated to other areas. This uncertainty in effectiveness has implications for implementing erosion/sediment risk reduction policies, where quantified targets are stipulated, as is the case in the EU Freshwater Fish and draft Soil Framework Directives. Also, demonstrating technical effectiveness of erosion control measures alone will not encourage uptake by land managers: quantifying the costs and benefits of adopting erosion mitigation is equally important, but these are uncertain and difficult to

Climate change mitigation in China

Energy Technology Data Exchange (ETDEWEB)

Xu, Bo

2012-07-01

study the policy instruments for climate change mitigation in China, domestic measures and parts of international cooperation adopted by the Chinese government were reviewed and analysed. Domestic measures consist of administration, regulatory and economic instruments, while China's participation in international agreements on mitigating climate change is mainly by supplying certified emission reductions (CERs) to industrialised countries under the Clean Development Mechanism (CDM). The most well-known instruments, i.e. taxes and emissions trading, are both at a critical stage of discussion before final implementation. Given the necessity for hybrid policies, it is important to optimise the combination of different policy instruments used in a given situation. The Durban Climate Change Conference in 2011 made a breakthrough decision that the second commitment period under the Kyoto Protocol would begin on 1 January 2013 and emissions limitation or reduction objectives for industrialised countries in the second period were quantified. China was also required to make more substantial commitments on limiting its emissions. The Chinese government announced at the Durban Conference that China will focus on the current mitigation target regarding CO{sub 2} intensity of GDP by 2020 and will conditionally accept a world-wide legal agreement on climate change thereafter. However, there will be no easy way ahead for China.

Making the Handoff from Earthquake Hazard Assessments to Effective Mitigation Measures (Invited)

Science.gov (United States)

Applegate, D.

2010-12-01

This year has witnessed a barrage of large earthquakes worldwide with the resulting damages ranging from inconsequential to truly catastrophic. We cannot predict when earthquakes will strike, but we can build communities that are resilient to strong shaking as well as to secondary hazards such as landslides and liquefaction. The contrasting impacts of the magnitude-7 earthquake that struck Haiti in January and the magnitude-8.8 event that struck Chile in April underscore the difference that mitigation and preparedness can make. In both cases, millions of people were exposed to severe shaking, but deaths in Chile were measured in the hundreds rather than the hundreds of thousands that perished in Haiti. Numerous factors contributed to these disparate outcomes, but the most significant is the presence of strong building codes in Chile and their total absence in Haiti. The financial cost of the Chilean earthquake still represents an unacceptably high percentage of that nation’s gross domestic product, a reminder that life safety is the paramount, but not the only, goal of disaster risk reduction measures. For building codes to be effective, both in terms of lives saved and economic cost, they need to reflect the hazard as accurately as possible. As one of four federal agencies that make up the congressionally mandated National Earthquake Hazards Reduction Program (NEHRP), the U.S. Geological Survey (USGS) develops national seismic hazard maps that form the basis for seismic provisions in model building codes through the Federal Emergency Management Agency and private-sector practitioners. This cooperation is central to NEHRP, which both fosters earthquake research and establishes pathways to translate research results into implementation measures. That translation depends on the ability of hazard-focused scientists to interact and develop mutual trust with risk-focused engineers and planners. Strengthening that interaction is an opportunity for the next generation

Effect of Wind Farm Noise on Local Residents' Decision to Adopt Mitigation Measures.

Science.gov (United States)

Botelho, Anabela; Arezes, Pedro; Bernardo, Carlos; Dias, Hernâni; Pinto, Lígia M Costa

2017-07-11

Wind turbines' noise is frequently pointed out as the reason for local communities' objection to the installation of wind farms. The literature suggests that local residents feel annoyed by such noise and that, in many instances, this is significant enough to make them adopt noise-abatement interventions on their homes. Aiming at characterizing the relationship between wind turbine noise, annoyance, and mitigating actions, we propose a novel conceptual framework. The proposed framework posits that actual sound pressure levels of wind turbines determine individual homes' noise-abatement decisions; in addition, the framework analyzes the role that self-reported annoyance, and perception of noise levels, plays on the relationship between actual noise pressure levels and those decisions. The application of this framework to a particular case study shows that noise perception and annoyance constitutes a link between the two. Importantly, however, noise also directly affects people's decision to adopt mitigating measures, independently of the reported annoyance.

Effect of Wind Farm Noise on Local Residents’ Decision to Adopt Mitigation Measures

Science.gov (United States)

Botelho, Anabela; Bernardo, Carlos; Dias, Hernâni; Pinto, Lígia M. Costa

2017-01-01

Wind turbines’ noise is frequently pointed out as the reason for local communities’ objection to the installation of wind farms. The literature suggests that local residents feel annoyed by such noise and that, in many instances, this is significant enough to make them adopt noise-abatement interventions on their homes. Aiming at characterizing the relationship between wind turbine noise, annoyance, and mitigating actions, we propose a novel conceptual framework. The proposed framework posits that actual sound pressure levels of wind turbines determine individual homes’ noise-abatement decisions; in addition, the framework analyzes the role that self-reported annoyance, and perception of noise levels, plays on the relationship between actual noise pressure levels and those decisions. The application of this framework to a particular case study shows that noise perception and annoyance constitutes a link between the two. Importantly, however, noise also directly affects people’s decision to adopt mitigating measures, independently of the reported annoyance. PMID:28696404

Cost-effective and robust mitigation of space debris in low earth orbit

Science.gov (United States)

Walker, R.; Martin, C.

It is predicted that the space debris population in low Earth orbit (LEO) will continue to grow and in an exponential manner in the long-term due to an increasing rate of collisions between large objects, unless internationally-accepted space debris mitigation measures are adopted soon. Such measures are aimed at avoiding the future generation of space debris objects and primarily need to be effective in preventing significant long-term growth in the debris population, even in the potential scenario of an increase in future space activity. It is also important that mitigation measures can limit future debris population levels, and therefore the underlying collision risk to space missions, to the lowest extent possible. However, for their wide acceptance, the cost of implementation associated with mitigation measures needs to be minimised as far as possible. Generally, a lower collision risk will cost more to achieve and vice versa, so it is necessary to strike a balance between cost and risk in order to find a cost-effective set of mitigation measures. In this paper, clear criteria are established in order to assess the cost-effectiveness of space debris mitigation measures. A full cost-risk-benefit trade-off analysis of numerous mitigation scenarios is presented. These scenarios consider explosion prevention and post-mission disposal of space systems, including de-orbiting to limited lifetime orbits and re-orbiting above the LEO region. The ESA DELTA model is used to provide long-term debris environment projections for these scenarios as input to the benefit and risk parts of the trade-off analysis. Manoeuvre requirements for the different post-mission disposal scenarios were also calculated in order to define the cost-related element. A 25-year post-mission lifetime de-orbit policy, combined with explosion prevention and mission-related object limitation, was found to be the most cost-effective solution to the space debris problem in LEO. This package would also

Long term performance of radon mitigation systems

International Nuclear Information System (INIS)

Prill, R.; Fisk, W.J.

2002-01-01

Researchers installed radon mitigation systems in 12 houses in Spokane, Washington and Coeur d'Alene, Idaho during the heating season 1985--1986 and continued to monitor indoor radon quarterly and annually for ten years. The mitigation systems included active sub-slab ventilation, basement over-pressurization, and crawlspace isolation and ventilation. The occupants reported various operational problems with these early mitigation systems. The long-term radon measurements were essential to track the effectiveness of the mitigation systems over time. All 12 homes were visited during the second year of the study, while a second set 5 homes was visited during the fifth year to determine the cause(s) of increased radon in the homes. During these visits, the mitigation systems were inspected and measurements of system performance were made. Maintenance and modifications were performed to improve system performance in these homes

Costs of mitigating CO2 emissions from passenger aircraft

Science.gov (United States)

Schäfer, Andreas W.; Evans, Antony D.; Reynolds, Tom G.; Dray, Lynnette

2016-04-01

In response to strong growth in air transportation CO2 emissions, governments and industry began to explore and implement mitigation measures and targets in the early 2000s. However, in the absence of rigorous analyses assessing the costs for mitigating CO2 emissions, these policies could be economically wasteful. Here we identify the cost-effectiveness of CO2 emission reductions from narrow-body aircraft, the workhorse of passenger air transportation. We find that in the US, a combination of fuel burn reduction strategies could reduce the 2012 level of life cycle CO2 emissions per passenger kilometre by around 2% per year to mid-century. These intensity reductions would occur at zero marginal costs for oil prices between US$50-100 per barrel. Even larger reductions are possible, but could impose extra costs and require the adoption of biomass-based synthetic fuels. The extent to which these intensity reductions will translate into absolute emissions reductions will depend on fleet growth.

Radon mitigation in schools utilising heating, ventilating and air conditioning systems

International Nuclear Information System (INIS)

Fisher, G.; Ligman, B.; Brennan, T.; Shaughnessy, R.; Turk, B.H.; Snead, B.

1994-01-01

As part of a continuing radon in schools technology development effort, EPA's School Evaluation Team has performed radon mitigation in schools by the method of ventilation/pressurisation control technology. Ventilation rates were increased, at a minimum, to meet the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) standard, Ventilation for Acceptable Indoor Air Quality (ASHRAE 62-1989). This paper presents the results and the preliminary evaluations which led to the team's decision to implement this technology. Factors considered include energy penalties, comfort, indoor air quality (IAQ), building shell tightness, and equipment costs. Cost benefit of heat recovery ventilation was also considered. Earlier results of the SEP team's efforts have indicated a severe ventilation problem within the schools of the United States. Two case studies are presented where HVAC technology was implemented for controlling radon concentrations. One involved the installation of a heat recovery ventilator to depressurise a crawl space and provide ventilation to the classrooms which previously had no mechanical ventilation. The other involved the restoration of a variable air volume system in a two-storey building. The HVAC system's controls were restored and modified to provide a constant building pressure differential to control the entry of radon. Pre-mitigation and post-mitigation indoor air pollutant measurements were taken, including radon, carbon dioxide (CO 2 ), particulates, and bio-aerosols. Long-term monitoring of radon, CO 2 , building pressure differentials, and indoor/outdoor temperature and relative humidity is presented. (author)

Bonneville Power Administration Wildlife Mitigation Program : Draft Environmental Impact Statement.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1996-08-01

Bonneville Power Administration (BPA) is responsible for mitigating the loss of wildlife habitat caused by the development of the Federal Columbia River Power System. BPA accomplishes this mitigation by funding projects consistent with those recommended by the Northwest Power Planning Council (Council). The projects are submitted to the Council from Indian Tribes, state agencies, property owners, private conservation groups, and other Federal agencies. Future wildlife mitigation actions with potential environmental impacts are expected to include land acquisition and management, water rights acquisition and management, habitat restoration and enhancement, installation of watering devices, riparian fencing, and similar wildlife conservation actions. BPA needs to ensure that individual wildlife mitigation projects are planned and managed with appropriate consistency across projects, jurisdictions, and ecosystems, as well as across time. BPA proposes to standardize the planning and implementation of individual wildlife mitigation projects funded by BPA. Alternative 1 is the No Action alternative. Five standardizing alternatives are identified to represent the range of possible strategies, goals, and procedural requirements reasonably applicable to BPA-funded projects under a standardized approach to project planning and implementation. All action alternatives are based on a single project planning process designed to resolve site-specific issues in an ecosystem context and to adapt to changing conditions and information.

China's carbon mitigation strategies: Enough?

International Nuclear Information System (INIS)

Wang, Can; Lin, Jie; Cai, Wenjia; Liao, Hua

2014-01-01

As the largest CO 2 emitter in the world, China has made great achievements in carbon mitigation over the past eight years (2005–2013). Through a comprehensive and detailed overview of China's carbon mitigation strategies, this paper presents China's carbon mitigation achievements and strategies, including adjustment to the industrial structure, saving energy, optimizing energy structure, increasing forest carbon sinks, building foundational capacity, innovating technologies and practicing mitigation efforts in localities and sectors. Having been in place for some years already, the results of many of these measures and policies are now plateauing. China is facing challenges including inevitable emissions growth, shrinking of mitigation potential from technological progress, difficulty in further adjusting the industrial structure and economic development mode, continued dominance of coal in the energy mix, local governments’ reluctance to adopt measures to reduce carbon emissions, etc. Through policy diagnosis it is found that the root causes of these problems and challenges are the facts that policy-making is done primarily on the production side and there is an absence of co-benefits in the decision-making process. Therefore, it is recommended that translating mitigation targets to the consumption level and mainstreaming mitigations’ co-benefits into decision-making processes are needed to quickly enhance the results of mitigation work in China. - Highlights: • Key aspects of China's carbon mitigation strategies were outlined. • China's carbon mitigation achievements were summarized. • Challenges to meet further mitigation were investigated. • Strategic suggestions to quickly enhance China's mitigation ambition were given

Climate change mitigation options in the rural land use sector: Stakeholders’ perspectives on barriers, enablers and the role of policy in North East Scotland

International Nuclear Information System (INIS)

Feliciano, Diana; Hunter, Colin; Slee, Bill; Smith, Pete

2014-01-01

Highlights: • Farmers are mainly willing to expand the uptake of mitigation practices they already implement. • Main barriers and enablers to uptake are physical–environmental constraints and personal values. • Farmers consider that agriculture is a “special case” because their function is to produce food. • Lack of incentives is not the main barrier to the uptake of mitigation practices. • Policies should allow differentiation, and mitigation measures should be integrated with other mechanisms. - Abstract: The rural land use sector could potentially mitigate a large amount of GHG emissions. Implementation requires the engagement of farmers and other land managers. Understanding the barriers and enablers for the uptake of these practices is essential both to inform policy-makers and to achieve effective policy outreach. In Scotland, the rural land use sector is subject to a greenhouse gas (GHG) emission reduction target of 21% by 2020 relative to 1990 levels. This study contributes to the body of research on stakeholders’ perspectives about suitability of climate change mitigation practices at the regional level. Mixed-methods were used to collect the data, namely participatory workshops with scientists and relevant stakeholders, a farmer questionnaire, and focus groups with farmers. Findings show that farmers were mainly willing to expand the uptake of mitigation practices they were already implementing because they consider these are the most cost-effective. Barriers to the implementation of mitigation practices are mainly related to physical–environmental constraints, lack of information and education and personal interests and values. Similarly, enablers are also related to physical–environmental factors and personal interests and values. Economic incentives, voluntary approaches and provision of information have been identified by workshop participants as the most favourable approaches needed to promote the uptake of technically feasible

Greenhouse gas emissions from Thailand’s transport sector: Trends and mitigation options

International Nuclear Information System (INIS)

Pongthanaisawan, Jakapong; Sorapipatana, Chumnong

2013-01-01

Rapid growth of population and economy during the past two decades has resulted in continuing growth of transport’s oil demand and greenhouse gas (GHG) emissions. The objectives of this study are to examine pattern and growth in energy demand as well as related GHG emissions from the transport sector and to analyze potential pathways of energy demand and GHG emissions reduction from this sector of the measures being set by the Thai Government. A set of econometric models has been developed to estimate the historical trend of energy demand and GHG emissions in the transport sector during 1989–2007 and to forecast future trends to 2030. Two mitigation option scenarios of fuel switching and energy efficiency options have been designed to analyze pathways of energy consumption and GHG emissions reduction potential in Thailand’s transport sector compared with the baseline business-as-usual (BAU) scenario, which assumed to do nothing influences the long-term trends of transport energy demand. It has been found that these two mitigation options can reduce the GHG emissions differently. The fuel-switching option could significantly reduce the amount of GHG emissions in a relatively short time frame, albeit it will be limited by its supply resources, whereas the energy efficiency option is more effective for GHG emissions mitigation in the long term. Therefore, both measures should be implemented simultaneously for both short and long term mitigation effects in order to more effectively achieve GHG emissions reduction target.

Informing decision making in agricultural greenhouse gas mitigation policy: A Best–Worst Scaling survey of expert and farmer opinion in the sheep industry

International Nuclear Information System (INIS)

Jones, A.K.; Jones, D.L.; Edwards-Jones, G.; Cross, P.

2013-01-01

Highlights: ► Effectiveness and practicality of greenhouse gas mitigation measures are assessed. ► Best–Worst Scaling surveys are used to elicit expert and sheep farmer opinion. ► Effective and practical measures are priority candidates for policy inclusion. ► Support mechanisms may be needed to deliver effective, low practicality measures. ► Variation in farmers’ perceptions of practicality holds implications for policy delivery. -- Abstract: Policy decision making for agricultural greenhouse gas mitigation is hindered by scientific uncertainty regarding the effectiveness of mitigation measures. Successful on-farm adoption of measures is contingent upon farmer perception of the relative practicality of implementing the measure and associated incentives and advice. In the absence of a comprehensive evidence base we utilised Best–Worst Scaling, a discrete choice survey method, to elicit expert and farmer opinion on the relative effectiveness and practicality of mitigation measures to reduce greenhouse gas emissions from sheep production systems. The method enabled individual mitigation measures to be ranked on a ratio scale of effectiveness (expert opinion) and practicality (farmer opinion). Six measures were identified as possessing the combined qualities of effectiveness and practicality and are considered priority candidates for policy promotion. The overall preferred measure was the use of legumes in pasture reseed mixes. Estimation and analysis of the distribution of individual respondent scores revealed heterogeneity in farmers’ perceptions of practicality, suggesting that flexible policies are required to enable farmers to select mitigation measures most suited to their farm type and locality. Practical measures with below average effectiveness may be widely adopted with limited regulation, incentivisation or advice, whilst some highly effective measures with lower practicality are likely to present greater obstacles to adoption

Identification and mitigation of stray laser light in the Thomson scattering system on the Madison Symmetric Torus (MST)

Energy Technology Data Exchange (ETDEWEB)

Jacobson, C. M., E-mail: cjacobson@wisc.edu; Borchardt, M. T.; Den Hartog, D. J.; Falkowski, A. F.; Morton, L. A.; Thomas, M. A. [Department of Physics, University of Wisconsin–Madison, 1150 University Avenue, Madison, Wisconsin 53706 (United States)

2016-11-15

The Thomson scattering diagnostic on the Madison Symmetric Torus (MST) records excessive levels of stray Nd:YAG laser light. Stray light saturates the 1064 nm spectral channel in all polychromators, which prevents absolute electron density measurements via Rayleigh scattering calibration. Furthermore, stray light contaminates adjacent spectral channels for r/a ≥ 0.75, which renders the diagnostic unable to make electron temperature measurements at these radii. In situ measurements of stray light levels during a vacuum vessel vent are used to identify stray light sources and strategies for reduction of stray light levels. Numerical modeling using Zemax OpticStudio supports these measurements. The model of the vacuum vessel and diagnostic includes synthetic collection optics to enable direct comparison of measured and simulated stray light levels. Modeling produces qualitatively similar stray light distributions to MST measurements, and quantifies the mitigation effects of stray light mitigation strategies prior to implementation.

Identification and mitigation of stray laser light in the Thomson scattering system on the Madison Symmetric Torus (MST)

International Nuclear Information System (INIS)

Jacobson, C. M.; Borchardt, M. T.; Den Hartog, D. J.; Falkowski, A. F.; Morton, L. A.; Thomas, M. A.

2016-01-01

The Thomson scattering diagnostic on the Madison Symmetric Torus (MST) records excessive levels of stray Nd:YAG laser light. Stray light saturates the 1064 nm spectral channel in all polychromators, which prevents absolute electron density measurements via Rayleigh scattering calibration. Furthermore, stray light contaminates adjacent spectral channels for r/a ≥ 0.75, which renders the diagnostic unable to make electron temperature measurements at these radii. In situ measurements of stray light levels during a vacuum vessel vent are used to identify stray light sources and strategies for reduction of stray light levels. Numerical modeling using Zemax OpticStudio supports these measurements. The model of the vacuum vessel and diagnostic includes synthetic collection optics to enable direct comparison of measured and simulated stray light levels. Modeling produces qualitatively similar stray light distributions to MST measurements, and quantifies the mitigation effects of stray light mitigation strategies prior to implementation.

Mercury mitigative measures related to hydroelectric reservoirs. The La Grande Complex experience

International Nuclear Information System (INIS)

Sbeghen, J.; Schetagne, R.

1995-01-01

Quebec Hydro's plan for mitigation of mercury contamination in fish and wildlife in the La Grande river basin was presented. The hazard and environmental threat posed by mercury contamination through flooding was described. Implications of mercury contamination for the Cree natives was discussed and provisions of the James Bay mercury agreement were described. Potential 'at source' remedial measures were described, including soil and vegetation removal, controlled burning of soils and vegetation, capping of flooded soils, lime or sulphite salt addition, sediment suspension, genetic manipulation of bacterial populations, selenium addition, nutrient addition, intensive fishing, and reservoir draining. Compensation measures were considered since no practical medium term remedial measures could be found. A case study of the Eastmain-1 Reservoir's $213 000 000 deforestation program was cited as a possible model. It was concluded that realistically, compensation produced the only feasible health risk reduction program, since none of the 'at source' remedial measure were technically or economically feasible. 24 refs

Implementation and rejection of industrial steam system energy efficiency measures

International Nuclear Information System (INIS)

Therkelsen, Peter; McKane, Aimee

2013-01-01

Steam systems consume approximately one third of energy applied at US industrial facilities. To reduce energy consumption, steam system energy assessments have been conducted on a wide range of industry types over the course of 5 years through the Energy Savings Assessment (ESA) program administered by the US Department of Energy (US DOE). ESA energy assessments result in energy efficiency measure recommendations that are given potential energy and energy cost savings and potential implementation cost values. Saving and cost metrics that measure the impact recommended measures will have at facilities, described as percentages of facility baseline energy and energy cost, are developed from ESA data and used in analyses. Developed savings and cost metrics are examined along with implementation and rejection rates of recommended steam system energy efficiency measures. Based on analyses, implementation of steam system energy efficiency measures is driven primarily by cost metrics: payback period and measure implementation cost as a percentage of facility baseline energy cost (implementation cost percentage). Stated reasons for rejecting recommended measures are primarily based upon economic concerns. Additionally, implementation rates of measures are not only functions of savings and cost metrics, but time as well. - Highlights: ► We examine uptake/rejection of industrial steam system energy efficiency measures. ► We examine metrics that correspond to uptake/rejection of recommended measures. ► We examine barriers hindering steam system energy efficiency measure implementation. ► Uptake/rejection of steam measures is linked to potential cost metrics. ► Increased uptake of measures and uptake of more costly measures increases with time

Irradiation embrittlement mitigation

Energy Technology Data Exchange (ETDEWEB)

Torronen, K; Pelli, R; Planman, T; Valo, M [Technical Research Centre of Finland, Jyvaeskylae (Finland). Combustion and Thermal Engineering Lab.

1994-12-31

Mitigation methods for reducing the irradiation damage on pressure vessel materials are reviewed: load leakage loading schemes are commonly used in PWRs to mitigate reactor pressure vessel embrittlement; dummy assemblies have been applied in WWER 440-type and in some old western power plants, when exceptional fast embrittlement has been encountered; shielding of the pressure vessel has been developed, but is not in common use; pre-stressing the pressure vessel has been proposed for preventing PTS failures, but its applicability is not yet demonstrated. The large number of successful annealing treatments performed in WWER 440 type reactors as well as research on the effects of annealing treatments suggest applications for western PWRs. The emergency core cooling systems have been modified in WWER 440-type reactors in connection with other mitigation measures. (authors). 37 refs., 18 figs., 2 tabs.

Irradiation embrittlement mitigation

International Nuclear Information System (INIS)

Torronen, K.; Pelli, R.; Planman, T.; Valo, M.

1993-01-01

Mitigation methods for reducing the irradiation damage on pressure vessel materials are reviewed: load leakage loading schemes are commonly used in PWRs to mitigate reactor pressure vessel embrittlement; dummy assemblies have been applied in WWER 440-type and in some old western power plants, when exceptional fast embrittlement has been encountered; shielding of the pressure vessel has been developed, but is not in common use; pre-stressing the pressure vessel has been proposed for preventing PTS failures, but its applicability is not yet demonstrated. The large number of successful annealing treatments performed in WWER 440 type reactors as well as research on the effects of annealing treatments suggest applications for western PWRs. The emergency core cooling systems have been modified in WWER 440-type reactors in connection with other mitigation measures. (authors). 37 refs., 18 figs., 2 tabs

Current-use pesticides in stream water and suspended particles following runoff: exposure, effects, and mitigation requirements.

Science.gov (United States)

Bereswill, Renja; Streloke, Martin; Schulz, Ralf

2013-06-01

The European Union's directive for sustainable use of pesticides requires implementing risk mitigation measures at streams threatened by pesticide entries. The need for mitigation measures was investigated at 10 stream sites within an intensively used arable region in central Germany by characterizing pesticide exposure following edge-of-field runoff and effects on the aquatic macroinvertebrates. Moreover, the influence of riparian buffer strip width (as a mitigation measure) at the sampling sites was considered. Generally, invertebrate fauna was dominated by pesticide-tolerant species, suggesting a high pesticide exposure at almost all sites. This result is also reflected by the elevated levels of suspended particle contamination in terms of toxic units (logTUMax  > -2), corresponding to one-hundredth of the median lethal concentration (LC50) to Daphnia magna. At two sites that received high aqueous-phase entries of the pyrethroid lambda-cyhalothrin (logTUMax  > -0.6), the abundance and number of sensitive species in terms of the species at risk index decreased during the pesticide application period. In contrast, no acute significant negative effects on macroinvertebrates were observed at sites characterised by low water-phase toxicity (logTUMax  < -3.5). An influence of riparian buffer strip width on pesticide exposure was not observed, supposedly because of the presence of erosion rills and ephemeral ditches. In conclusion, results show that mitigation measures (such as the improvement of currently present riparian buffer strips) are needed in the study area. Copyright © 2013 SETAC.

Nationally Appropriate Mitigation Action: Understanding NAMA Cycle

DEFF Research Database (Denmark)

Sharma, Sudhir; Desgain, Denis DR

There is no internationally defined or agreed Nationally Appropriate Mitigation Action(NAMA) cycle, as was the case, for example, with the Clean Development Mechanisms (CDM) project cycle. However, there are some common steps that NAMA identification, formulation, and implementation will all go...

Environmental Assessment and Finding of No Significant Impact: Implementation of the Wetland Mitigation Bank Program at the Savannah River Site

Energy Technology Data Exchange (ETDEWEB)

N/A

1999-04-28

The Department of Energy (DOE) has prepared an environmental assessment (EA) (DOE/EA-1205) for the proposed implementation of a wetland mitigation bank program at the Savannah River Site (SRS), located near Aiken, South Carolina. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA). Therefore, the preparation of an environmental impact statement (EIS) is not required, and DOE is issuing this Finding of No Significant Impact (FONSI) and Floodplain Statement of Findings.

Implementation and Rejection of Industrial Steam System Energy Efficiency Measures

Energy Technology Data Exchange (ETDEWEB)

Therkelesen, Peter [Environmental Energy Technologies Division Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); McKane, Aimee [Environmental Energy Technologies Division Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

2013-05-01

Steam systems consume approximately one third of energy applied at U.S. industrial facilities. To reduce energy consumption, steam system energy assessments have been conducted on a wide range of industry types over the course of five years through the Energy Savings Assessment (ESA) program administered by the U.S. Department of Energy (U.S. DOE). ESA energy assessments result in energy efficiency measure recommendations that are given potential energy and energy cost savings and potential implementation cost values. Saving and cost metrics that measure the impact recommended measures will have at facilities, described as percentages of facility baseline energy and energy cost, are developed from ESA data and used in analyses. Developed savings and cost metrics are examined along with implementation and rejection rates of recommended steam system energy efficiency measures. Based on analyses, implementation of steam system energy efficiency measures is driven primarily by cost metrics: payback period and measure implementation cost as a percentage of facility baseline energy cost (implementation cost percentage). Stated reasons for rejecting recommended measures are primarily based upon economic concerns. Additionally, implementation rates of measures are not only functions of savings and cost metrics, but time as well.

Dual Axis Radiographic Hydrodynamic Test Facility mitigation action plan. Annual report for 1998

International Nuclear Information System (INIS)

Haagenstad, T.

1999-01-01

This Mitigation Action Plan Annual Report (MAPAR) has been prepared as part of implementing the Dual Axis Radiographic Hydrodynamic Test Facility (DARHT) Mitigation Action Plan (MAP) to protect workers, soils, water, and biotic and cultural resources in and around the facility

Dual Axis Radiographic Hydrodynamic Test Facility mitigation action plan. Annual report for 1998

Energy Technology Data Exchange (ETDEWEB)

Haagenstad, T.

1999-01-15

This Mitigation Action Plan Annual Report (MAPAR) has been prepared as part of implementing the Dual Axis Radiographic Hydrodynamic Test Facility (DARHT) Mitigation Action Plan (MAP) to protect workers, soils, water, and biotic and cultural resources in and around the facility.

Climate change mitigation through livestock system transitions

Science.gov (United States)

Havlík, Petr; Valin, Hugo; Herrero, Mario; Obersteiner, Michael; Schmid, Erwin; Rufino, Mariana C.; Mosnier, Aline; Thornton, Philip K.; Böttcher, Hannes; Conant, Richard T.; Frank, Stefan; Fritz, Steffen; Fuss, Sabine; Kraxner, Florian; Notenbaert, An

2014-01-01

Livestock are responsible for 12% of anthropogenic greenhouse gas emissions. Sustainable intensification of livestock production systems might become a key climate mitigation technology. However, livestock production systems vary substantially, making the implementation of climate mitigation policies a formidable challenge. Here, we provide results from an economic model using a detailed and high-resolution representation of livestock production systems. We project that by 2030 autonomous transitions toward more efficient systems would decrease emissions by 736 million metric tons of carbon dioxide equivalent per year (MtCO2e⋅y−1), mainly through avoided emissions from the conversion of 162 Mha of natural land. A moderate mitigation policy targeting emissions from both the agricultural and land-use change sectors with a carbon price of US$10 per tCO2e could lead to an abatement of 3,223 MtCO2e⋅y−1. Livestock system transitions would contribute 21% of the total abatement, intra- and interregional relocation of livestock production another 40%, and all other mechanisms would add 39%. A comparable abatement of 3,068 MtCO2e⋅y−1 could be achieved also with a policy targeting only emissions from land-use change. Stringent climate policies might lead to reductions in food availability of up to 200 kcal per capita per day globally. We find that mitigation policies targeting emissions from land-use change are 5 to 10 times more efficient—measured in “total abatement calorie cost”—than policies targeting emissions from livestock only. Thus, fostering transitions toward more productive livestock production systems in combination with climate policies targeting the land-use change appears to be the most efficient lever to deliver desirable climate and food availability outcomes. PMID:24567375

The Implementation Leadership Scale (ILS): development of a brief measure of unit level implementation leadership.

Science.gov (United States)

Aarons, Gregory A; Ehrhart, Mark G; Farahnak, Lauren R

2014-04-14

In healthcare and allied healthcare settings, leadership that supports effective implementation of evidenced-based practices (EBPs) is a critical concern. However, there are no empirically validated measures to assess implementation leadership. This paper describes the development, factor structure, and initial reliability and convergent and discriminant validity of a very brief measure of implementation leadership: the Implementation Leadership Scale (ILS). Participants were 459 mental health clinicians working in 93 different outpatient mental health programs in Southern California, USA. Initial item development was supported as part of a two United States National Institutes of Health (NIH) studies focused on developing implementation leadership training and implementation measure development. Clinician work group/team-level data were randomly assigned to be utilized for an exploratory factor analysis (n = 229; k = 46 teams) or for a confirmatory factor analysis (n = 230; k = 47 teams). The confirmatory factor analysis controlled for the multilevel, nested data structure. Reliability and validity analyses were then conducted with the full sample. The exploratory factor analysis resulted in a 12-item scale with four subscales representing proactive leadership, knowledgeable leadership, supportive leadership, and perseverant leadership. Confirmatory factor analysis supported an a priori higher order factor structure with subscales contributing to a single higher order implementation leadership factor. The scale demonstrated excellent internal consistency reliability as well as convergent and discriminant validity. The ILS is a brief and efficient measure of unit level leadership for EBP implementation. The availability of the ILS will allow researchers to assess strategic leadership for implementation in order to advance understanding of leadership as a predictor of organizational context for implementation. The ILS also holds promise as a tool for

The implementation leadership scale (ILS): development of a brief measure of unit level implementation leadership

Science.gov (United States)

2014-01-01

Background In healthcare and allied healthcare settings, leadership that supports effective implementation of evidenced-based practices (EBPs) is a critical concern. However, there are no empirically validated measures to assess implementation leadership. This paper describes the development, factor structure, and initial reliability and convergent and discriminant validity of a very brief measure of implementation leadership: the Implementation Leadership Scale (ILS). Methods Participants were 459 mental health clinicians working in 93 different outpatient mental health programs in Southern California, USA. Initial item development was supported as part of a two United States National Institutes of Health (NIH) studies focused on developing implementation leadership training and implementation measure development. Clinician work group/team-level data were randomly assigned to be utilized for an exploratory factor analysis (n = 229; k = 46 teams) or for a confirmatory factor analysis (n = 230; k = 47 teams). The confirmatory factor analysis controlled for the multilevel, nested data structure. Reliability and validity analyses were then conducted with the full sample. Results The exploratory factor analysis resulted in a 12-item scale with four subscales representing proactive leadership, knowledgeable leadership, supportive leadership, and perseverant leadership. Confirmatory factor analysis supported an a priori higher order factor structure with subscales contributing to a single higher order implementation leadership factor. The scale demonstrated excellent internal consistency reliability as well as convergent and discriminant validity. Conclusions The ILS is a brief and efficient measure of unit level leadership for EBP implementation. The availability of the ILS will allow researchers to assess strategic leadership for implementation in order to advance understanding of leadership as a predictor of organizational context for implementation

Public perceptions about climate change mitigation in British Columbia's forest sector

Science.gov (United States)

Hagerman, Shannon; Kozak, Robert; Hoberg, George

2018-01-01

The role of forest management in mitigating climate change is a central concern for the Canadian province of British Columbia. The successful implementation of forest management activities to achieve climate change mitigation in British Columbia will be strongly influenced by public support or opposition. While we now have increasingly clear ideas of the management opportunities associated with forest mitigation and some insight into public support for climate change mitigation in the context of sustainable forest management, very little is known with respect to the levels and basis of public support for potential forest management strategies to mitigate climate change. This paper, by describing the results of a web-based survey, documents levels of public support for the implementation of eight forest carbon mitigation strategies in British Columbia’s forest sector, and examines and quantifies the influence of the factors that shape this support. Overall, respondents ascribed a high level of importance to forest carbon mitigation and supported all of the eight proposed strategies, indicating that the British Columbia public is inclined to consider alternative practices in managing forests and wood products to mitigate climate change. That said, we found differences in levels of support for the mitigation strategies. In general, we found greater levels of support for a rehabilitation strategy (e.g. reforestation of unproductive forest land), and to a lesser extent for conservation strategies (e.g. old growth conservation, reduced harvest) over enhanced forest management strategies (e.g. improved harvesting and silvicultural techniques). We also highlighted multiple variables within the British Columbia population that appear to play a role in predicting levels of support for conservation and/or enhanced forest management strategies, including environmental values, risk perception, trust in groups of actors, prioritized objectives of forest management and socio

Measurement requirements for a Near-Earth Asteroid impact mitigation demonstration mission

Science.gov (United States)

Wolters, Stephen D.; Ball, Andrew J.; Wells, Nigel; Saunders, Christopher; McBride, Neil

2011-10-01

A concept for an Impact Mitigation Preparation Mission, called Don Quijote, is to send two spacecrafts to a Near-Earth Asteroid (NEA): an Orbiter and an Impactor. The Impactor collides with the asteroid while the Orbiter measures the resulting change in the asteroid's orbit, by means of a Radio Science Experiment (RSE) carried out before and after the impact. Three parallel Phase A studies on Don Quijote were carried out for the European Space Agency: the research presented here reflects the outcomes of the study by QinetiQ. We discuss the mission objectives with regard to the prioritisation of payload instruments, with emphasis on the interpretation of the impact. The Radio Science Experiment is described and it is examined how solar radiation pressure may increase the uncertainty in measuring the orbit of the target asteroid. It is determined that to measure the change in orbit accurately a thermal IR spectrometer is mandatory, to measure the Yarkovsky effect. The advantages of having a laser altimeter are discussed. The advantages of a dedicated wide-angle impact camera are discussed and the field-of-view is initially sized through a simple model of the impact.

Approach to mitigate intergranular stress corrosion cracking and dose rate reduction rate by water chemistry control in Tokai-2

International Nuclear Information System (INIS)

Hisamune, Kenji

2015-01-01

The Japan Atomic Power Company (JAPC) had been working on material replacement and measures to mitigate stress in order to maintain the integrity of the structural material of Tokai-Daini nuclear power plant (Tokai-2, BWR, 1,100 MWe; commercial operation started on November 28, 1978). In addition, as Stress Corrosion Cracking (SCC) environmental mitigation measures, we have been reducing the sulfate ion concentration in the reactor water by improving the regeneration method of the ion exchange resin at condensate purification system. Furthermore, in conducting the SCC environmental mitigation measures by applying hydrogen water chemistry (HWC) and HWC during start-up (HDS), we have been reducing the oxidizing agent concentration in the reactor water. On the other hand, as a plant that has not installed condensate filters, we have been working on feed water iron concentration reduction measures in Tokai-2 as part of the dose reduction measures. Therefore, we have improved condensate demineralizer's ion exchange resin and the ion exchange resin cleaning method using the ARCS (Advanced Resin Cleaning System) in order to improve the iron removal performance of condensate demineralizer. This document reports the improvement effect of the SCC environmental mitigation measures and the dose reduction measures by water chemistry management at Tokai-2. In addition, the dose reduction effect of the recently applied zinc injection, and the Electrochemical Corrosion Potential (ECP) monitoring plan under the On-Line Noble Chemical Addition (OLNC™) to be implemented later shall be introduced. (author)

Pain management and opioid risk mitigation in the military.

Science.gov (United States)

Sharpe Potter, Jennifer; Bebarta, Vikhyat S; Marino, Elise N; Ramos, Rosemarie G; Turner, Barbara J

2014-05-01

Opioid analgesics misuse is a significant military health concern recognized as a priority issue by military leadership. Opioids are among those most commonly prescribed medications in the military for pain management. The military has implemented opioid risk mitigation strategies, including the Sole Provider Program and the Controlled Drug Management Analysis and Reporting Tool, which are used to identify and monitor for risk and misuse. However, there are substantial opportunities to build on these existing systems to better ensure safer opioid prescribing and monitor for misuse. Opioid risk mitigation strategies implemented by the civilian sector include establishing clinical guidelines for opioid prescribing and prescription monitoring programs. These strategies may help to inform opioid risk mitigation in the military health system. Reducing the risk of opioid misuse and improving quality of care for our Warfighters is necessary. This must be done through evidence-based approaches with an investment in research to improve patient care and prevent opioid misuse as well as its sequelae. Reprint & Copyright © 2014 Association of Military Surgeons of the U.S.

Evaluating Health Co-Benefits of Climate Change Mitigation in Urban Mobility.

Science.gov (United States)

Wolkinger, Brigitte; Haas, Willi; Bachner, Gabriel; Weisz, Ulli; Steininger, Karl; Hutter, Hans-Peter; Delcour, Jennifer; Griebler, Robert; Mittelbach, Bernhard; Maier, Philipp; Reifeltshammer, Raphael

2018-04-28

There is growing recognition that implementation of low-carbon policies in urban passenger transport has near-term health co-benefits through increased physical activity and improved air quality. Nevertheless, co-benefits and related cost reductions are often not taken into account in decision processes, likely because they are not easy to capture. In an interdisciplinary multi-model approach we address this gap, investigating the co-benefits resulting from increased physical activity and improved air quality due to climate mitigation policies for three urban areas. Additionally we take a (macro-)economic perspective, since that is the ultimate interest of policy-makers. Methodologically, we link a transport modelling tool, a transport emission model, an emission dispersion model, a health model and a macroeconomic Computable General Equilibrium (CGE) model to analyze three climate change mitigation scenarios. We show that higher levels of physical exercise and reduced exposure to pollutants due to mitigation measures substantially decrease morbidity and mortality. Expenditures are mainly born by the public sector but are mostly offset by the emerging co-benefits. Our macroeconomic results indicate a strong positive welfare effect, yet with slightly negative GDP and employment effects. We conclude that considering economic co-benefits of climate change mitigation policies in urban mobility can be put forward as a forceful argument for policy makers to take action.

Influence of Signal Stationarity on Digital Stochastic Measurement Implementation

Directory of Open Access Journals (Sweden)

Ivan Župunski

2013-06-01

Full Text Available The paper presents the influence of signal stationarity on digital stochastic measurement method implementation. The implementation method is based on stochastic voltage generators, analog adders, low resolution A/D converter, and multipliers and accumulators implemented by Field-Programmable Gate Array (FPGA. The characteristic of first implementations of digital stochastic measurement was the measurement of stationary signal harmonics over the constant measurement period. Later, digital stochastic measurement was extended and used also when it was necessary to measure timeseries of non-stationary signal over the variable measurement time. The result of measurement is the set of harmonics, which is, in the case of non-stationary signals, the input for calculating digital values of signal in time domain. A theoretical approach to determine measurement uncertainty is presented and the accuracy trends with varying signal-to-noise ratio (SNR are analyzed. Noisy brain potentials (spontaneous and nonspontaneous are selected as an example of real non-stationary signal and its digital stochastic measurement is tested by simulations and experiments. Tests were performed without noise and with adding noise with SNR values of 10dB, 0dB and - 10dB. The results of simulations and experiments are compared versus theory calculations, and comparasion confirms the theory.

Develop an asset management tool for collecting and tracking commitments on selected environmental mitigation features.

Science.gov (United States)

2009-05-01

Wisconsin has constructed many environmental mitigation projects in conjunction with transportation projects that have been implemented according : to the National Environmental Policy Act. Other mitigation projects have been constructed pursuant to ...

US initiative on joint implementation: An overview

Energy Technology Data Exchange (ETDEWEB)

Dixon, R.K. [Initiative on Joint Implementation, Washington, DC (United States)

1996-12-31

More than 150 countries are now Party to United Nations Framework Convention on Climate Change, which seeks as its ultimate objective, to stabilize atmospheric concentrations of greenhouse gases at a level that would prevent dangerous human interference with the global climate system. As a step towards that goal, all Parties are to take measures to mitigate greenhouse gas emissions and to promote cooperation in the development and diffusion of technologies and practices that control or reduce emissions and enhance sinks of greenhouse gases. In the U.S. view, efforts between countries or entities within them to reduce net greenhouse gas emissions undertaken cooperatively, termed joint implementation (JI), holds significant potential both for reducing the threat of global climate change and for promoting sustainable development. To develop and operationalize the JI concept, the U.S. launched its Initiative on Joint Implementation (IJI) in October, 1993, and designed a program to attract private sector resources and to encourage the diffusion of innovative technologies to mitigate greenhouse gas emissions. The goals of U.S. IJI complement the principles of Decision 5, First Conference of the FCCC Parties, establishing an Activities Implemented Jointly pilot phase.

Marine and Hydrokinetic Renewable Energy Technologies: Potential Navigational Impacts and Mitigation Measures

Energy Technology Data Exchange (ETDEWEB)

Cool, Richard, M.; Hudon, Thomas, J.; Basco, David, R.; Rondorf, Neil, E.

2009-12-10

On April 15, 2008, the Department of Energy (DOE) issued a Funding Opportunity Announcement for Advanced Water Power Projects which included a Topic Area for Marine and Hydrokinetic Renewable Energy Market Acceleration Projects. Within this Topic Area, DOE identified potential navigational impacts of marine and hydrokinetic renewable energy technologies and measures to prevent adverse impacts on navigation as a sub-topic area. DOE defines marine and hydrokinetic technologies as those capable of utilizing one or more of the following resource categories for energy generation: ocean waves; tides or ocean currents; free flowing water in rivers or streams; and energy generation from the differentials in ocean temperature. PCCI was awarded Cooperative Agreement DE-FC36-08GO18177 from the DOE to identify the potential navigational impacts and mitigation measures for marine hydrokinetic technologies, as summarized herein. The contract also required cooperation with the U.S. Coast Guard (USCG) and two recipients of awards (Pacific Energy Ventures and reVision) in a sub-topic area to develop a protocol to identify streamlined, best-siting practices. Over the period of this contract, PCCI and our sub-consultants, David Basco, Ph.D., and Neil Rondorf of Science Applications International Corporation, met with USCG headquarters personnel, with U.S. Army Corps of Engineers headquarters and regional personnel, with U.S. Navy regional personnel and other ocean users in order to develop an understanding of existing practices for the identification of navigational impacts that might occur during construction, operation, maintenance, and decommissioning. At these same meetings, “standard” and potential mitigation measures were discussed so that guidance could be prepared for project developers. Concurrently, PCCI reviewed navigation guidance published by the USCG and international community. This report summarizes the results of this effort, provides guidance in the form of a

Large-scale assessment of flood risk and the effects of mitigation measures along the Elbe River

NARCIS (Netherlands)

de Kok, Jean-Luc; Grossmann, M.

2010-01-01

The downstream effects of flood risk mitigation measures and the necessity to develop flood risk management strategies that are effective on a basin scale call for a flood risk assessment methodology that can be applied at the scale of a large river. We present an example of a rapid flood risk

Airflow measurement techniques applied to radon mitigation problems

International Nuclear Information System (INIS)

Harrje, D.T.; Gadsby, K.J.

1989-01-01

During the past decade a multitude of diagnostic procedures associated with the evaluation of air infiltration and air leakage sites have been developed. The spirit of international cooperation and exchange of ideas within the AIC-AIVC conferences has greatly facilitated the adoption and use of these measurement techniques in the countries participating in Annex V. But wide application of such diagnostic methods are not limited to air infiltration alone. The subject of this paper concerns the ways to evaluate and improve radon reduction in buildings using diagnostic methods directly related to developments familiar to the AIVC. Radon problems are certainly not unique to the United States, and the methods described here have to a degree been applied by researchers of other countries faced with similar problems. The radon problem involves more than a harmful pollutant of the living spaces of our buildings -- it also involves energy to operate radon removal equipment and the loss of interior conditioned air as a direct result. The techniques used for air infiltration evaluation will be shown to be very useful in dealing with the radon mitigation challenge. 10 refs., 7 figs., 1 tab

Evaluating the effectiveness of urban energy conservation and GHG mitigation measures: The case of Xiamen city, China

International Nuclear Information System (INIS)

Lin Jianyi; Cao Bin; Cui Shenghui; Wang Wei; Bai Xuemei

2010-01-01

To assess the effectiveness of urban energy conservation and GHG mitigation measures, a detailed Long-range Energy Alternatives Planning (LEAP) model is developed and applied to analyze the future trends of energy demand and GHG emissions in Xiamen city. Two scenarios have been designed to describe the future energy strategies in relation to the development of Xiamen city. The 'Business as Usual' scenario assumes that the government will do nothing to influence the long-term trends of urban energy demand. An 'Integrated' scenario, on the other hand, is generated to assess the cumulative impact of a series of available reduction measures: clean energy substitution, industrial energy conservation, combined heat and power generation, energy conservation in building, motor vehicle control, and new and renewable energy development and utilization. The reduction potentials in energy consumption and GHG emissions are estimated for a time span of 2007-2020 under these different scenarios. The calculation results in Xiamen show that the clean energy substitution measure is the most effective in terms of energy saving and GHG emissions mitigation, while the industrial sector has the largest abatement potential.

Ethical implications of co-benefits rationale within climate change mitigation strategy

Directory of Open Access Journals (Sweden)

Rita Vasconcellos Oliveira

2016-10-01

Full Text Available Climate change mitigation effort is being translated into several actions and discourses that make collateral benefits and their rationale increasingly relevant for sustainability, in such a way that they are now a constant part of the political agenda. Taking a border and consensual perspective, co-benefits are considered here to be emerging advantages of the implementation of measures regarding the lowering of greenhouse gases.Departing from the analysis of policy documents referring to two European urban transportation strategies, the emergent co-benefits are problematized and discussed to better understand their moral aspect. Further ethical reflection is conducted after an analysis of some unintended consequences of co-benefits rationale coming from the mentioned examples. The focus is primarily on the challenges of an integrative moral justification for co-benefits and also for their role in the climate change mitigation effort. We also discuss the limitations of the current normative models that frame co-benefits rationale, from a moral viewpoint and in relation to the overall climate change mitigation strategy.In this article, we propose the concepts of well-being and freedom, as portrayed by Capabilities Approach, as possible guiding notions for the moral and social evaluation of goodness of these emergent benefits and their rationale too. Additionally, some preliminary conclusions are drawn regarding the potential of the presented concepts to favour the climate change mitigation action. Finally, a scenario is drawn where Capabilities Approach is the moral guideline for co-benefits rationale showing this way its potential in terms of enhancing climate change mitigation strategy.

Implementing spatial segregation measures in R.

Directory of Open Access Journals (Sweden)

Seong-Yun Hong

Full Text Available Reliable and accurate estimation of residential segregation between population groups is important for understanding the extent of social cohesion and integration in our society. Although there have been considerable methodological advances in the measurement of segregation over the last several decades, the recently developed measures have not been widely used in the literature, in part due to their complex calculation. To address this problem, we have implemented several newly proposed segregation indices in R, an open source software environment for statistical computing and graphics, as a package called seg. Although there are already a few standalone applications and add-on packages that provide access to similar methods, our implementation has a number of advantages over the existing tools. First, our implementation is flexible in the sense that it provides detailed control over the calculation process with a wide range of input parameters. Most of the parameters have carefully chosen defaults, which perform acceptably in many situations, so less experienced users can also use the implemented functions without too much difficulty. Second, there is no need to export results to other software programs for further analysis. We provide coercion methods that enable the transformation of our output classes into general R classes, so the user can use thousands of standard and modern statistical techniques, which are already available in R, for the post-processing of the results. Third, our implementation does not require commercial software to operate, so it is accessible to a wider group of people.

Effects of road mortality and mitigation measures on amphibian populations.

Science.gov (United States)

Beebee, Trevor J C

2013-08-01

Road mortality is a widely recognized but rarely quantified threat to the viability of amphibian populations. The global extent of the problem is substantial and factors affecting the number of animals killed on highways include life-history traits and landscape features. Secondary effects include genetic isolation due to roads acting as barriers to migration. Long-term effects of roads on population dynamics are often severe and mitigation methods include volunteer rescues and under-road tunnels. Despite the development of methods that reduce road kill in specific locations, especially under-road tunnels and culverts, there is scant evidence that such measures will protect populations over the long term. There also seems little likelihood that funding will be forthcoming to ameliorate the problem at the scale necessary to prevent further population declines. © 2013 Society for Conservation Biology.

The mediating role of social workers in the implementation of regional policies targeting energy poverty

International Nuclear Information System (INIS)

Scarpellini, Sabina; Sanz Hernández, M. Alexia; Llera-Sastresa, Eva; Aranda, Juan A.; López Rodríguez, María Esther

2017-01-01

This paper aims to provide a socio-political reflection of the role played by social workers in regional policies and of the real needs of households affected by energy poverty. The paper also examines the impact of technical-specialised training on the ability of social workers to prevent and mitigate conditions of household energy poverty in Europe. The adoption of a research-action-participation methodological framework and a training research approach has permitted the opinions of social workers to be collected through surveys, and their central role in implementing regional policies to be highlighted. The conclusions obtained have made possible the construction of a self-diagnosis and data-collection tool which increases the ability of social workers to mediate and implement urgent mitigation measures for energy poverty. Finally, regional policies which aim to mitigate household energy poverty are examined from the professional perspective of social workers. - Highlights: • Social workers play a mediating role in the certification of household energy poverty. • Specific training for social workers contributes to the prevention of energy poverty. • National wide regulation would enable the implementation of equitable measures for energy poverty. • It is recommendable to define progressive subsidies depending on the level of energy vulnerability of the households.

32 CFR Appendix C to Part 651 - Mitigation and Monitoring

Science.gov (United States)

2010-07-01

...) The identification and evaluation of mitigations involves the use of experts familiar with the... role in the mitigation. The lead agency must determine and agree upon how the mitigation measures will...

The third hans cloos lecture. Urban landslides: Socioeconomic impacts and overview of mitigative strategies

Science.gov (United States)

Schuster, R.L.; Highland, L.M.

2007-01-01

As a result of population pressures, hillsides in the world's urban areas are being developed at an accelerating rate. This development increases the risk for urban landslides triggered by rainfall or earthquake activity. To counter this risk, four approaches have been employed by landslide managers and urban planners: (1) restricting development in landslide-prone areas; (2) implementing and enforcing excavation, grading, and construction codes; (3) protecting existing developments by physical mitigation measures and (4) developing and installing monitoring and warning systems. Where they have been utilized, these approaches generally have been effective in reducing the risk due to landslide hazards. In addition to these practices, landslide insurance holds promise as a mitigative measure by reducing the financial impact of landslides on individual property owners. Until recently, however, such insurance has not been widely available and, where it is available, it is so expensive that it has been little used. ?? Springer-Verlag 2006.

Measuring the effectiveness of SDN mitigations against cyber attacks

NARCIS (Netherlands)

Koning, R.; de Graaff, B.; Meijer, R.; de Laat, C.; Grosso, P.

2017-01-01

To address increasing problems caused by cyber attacks, we leverage Software Defined networks and Network Function Virtualisation governed by a SARNET-agent to enable autonomous response and attack mitigation. A Secure Autonomous Response Network (SARNET) uses a control loop to constantly assess the

Lessons Learnt and Mitigation Measures for the CERN LHC Equipment with RF fingers

CERN Document Server

Métral, E; Assmann, R W; Baglin, V; Barnes, M J; Berrig, O E; Bertarelli, A; Bregliozzi, G; Calatroni, S; Carra, F; Caspers, F; Day, H A; Ferro-Luzzi, M; Gallilee, M A; Garion, C; Garlasche, M; Grudiev, A; Jimenez, J M; Jones, R; Kononenko, O; Losito, R; Nougaret, J L; Parma, V; Redaelli, S; Salvant, B; Strubin, P; Veness, R; Vollinger, C; Weterings, W

2013-01-01

Beam-induced RF heating has been observed in several LHC components when the bunch/beam intensity was increased and/or the bunch length reduced. In particular eight bellows, out of the ten double-bellow modules present in the machine in 2011, were found with the spring, which should keep the RF fingers in good electrical contact with the central insert, broken. Following these observations, the designs of all the components of the LHC equipped with RF fingers have been reviewed. The lessons learnt and mitigation measures are presented in this paper.

Radio frequency interference mitigation using deep convolutional neural networks

Science.gov (United States)

Akeret, J.; Chang, C.; Lucchi, A.; Refregier, A.

2017-01-01

We propose a novel approach for mitigating radio frequency interference (RFI) signals in radio data using the latest advances in deep learning. We employ a special type of Convolutional Neural Network, the U-Net, that enables the classification of clean signal and RFI signatures in 2D time-ordered data acquired from a radio telescope. We train and assess the performance of this network using the HIDE &SEEK radio data simulation and processing packages, as well as early Science Verification data acquired with the 7m single-dish telescope at the Bleien Observatory. We find that our U-Net implementation is showing competitive accuracy to classical RFI mitigation algorithms such as SEEK's SUMTHRESHOLD implementation. We publish our U-Net software package on GitHub under GPLv3 license.

Quantifying the biophysical climate change mitigation potential of Canada's forest sector

Science.gov (United States)

Smyth, C. E.; Stinson, G.; Neilson, E.; Lemprière, T. C.; Hafer, M.; Rampley, G. J.; Kurz, W. A.

2014-07-01

policies that deliver no net benefits to the atmosphere, (ii) a mix of strategies implemented across the country achieves the greatest mitigation impact, and (iii) because of the time delays in achieving carbon benefits for many forest-based mitigation activities, future contributions of the forest sector to climate mitigation can be maximized if implemented soon.

Detecting and mitigating battery charger and inverter aging

International Nuclear Information System (INIS)

Gunther, W.E.; Lewis, R.; Subudhi, M.

1988-08-01

This report constitutes the second of the two-phase approach for assessing the safety and operational aspects of battery charger and inverter aging in nuclear power plants. This work, conducted by Brookhaven National Laboratory (BNL) under the auspices of the US NRC Nuclear Plant Aging Research (NPAR) Program, evaluated operating experience data, nuclear power plant maintenance practices, and plant design information to determine the impact of battery charger and inverter aging on safety, and the methods which should be used to detect aging degradation and mitigate its effects. A naturally aged inverter and battery charger were tested at BNL to evaluate the naturally aged condition, the effectiveness of condition monitoring techniques, and the practicality of implementing selected maintenance and monitoring recommendations. Temperature monitoring, component parameter measurements, and the periodic observation of critical circuit waveforms are viable methods for monitoring aging degradation. A maintenance program for battery chargers and inverters is recommended. As described in this report, the maintenance program incorporates inspection, monitoring, testing and repair activities which should be performed to detect and mitigate aging effects, and thereby assure the operational readiness of this important equipment throughout the plant's operating life. 32 refs., 43 figs., 19 tabs

Technology learning for renewable energy: Implications for South Africa's long-term mitigation scenarios

International Nuclear Information System (INIS)

Winkler, Harald; Hughes, Alison; Haw, Mary

2009-01-01

Technology learning can make a significant difference to renewable energy as a mitigation option in South Africa's electricity sector. This article considers scenarios implemented in a Markal energy model used for mitigation analysis. It outlines the empirical evidence that unit costs of renewable energy technologies decline, considers the theoretical background and how this can be implemented in modeling. Two scenarios are modelled, assuming 27% and 50% of renewable electricity by 2050, respectively. The results show a dramatic shift in the mitigation costs. In the less ambitious scenario, instead of imposing a cost of Rand 52/t CO 2 -eq (at 10% discount rate), reduced costs due to technology learning turn renewables into negative cost option. Our results show that technology learning flips the costs, saving R143. At higher penetration rate, the incremental costs added beyond the base case decline from R92 per ton to R3. Including assumptions about technology learning turns renewable from a higher-cost mitigation option to one close to zero. We conclude that a future world in which global investment in renewables drives down unit costs makes it a much more cost-effective and sustainable mitigation option in South Africa.

Consequence of climate mitigation on the risk of hunger.

Science.gov (United States)

Hasegawa, Tomoko; Fujimori, Shinichiro; Shin, Yonghee; Tanaka, Akemi; Takahashi, Kiyoshi; Masui, Toshihiko

2015-06-16

Climate change and mitigation measures have three major impacts on food consumption and the risk of hunger: (1) changes in crop yields caused by climate change; (2) competition for land between food crops and energy crops driven by the use of bioenergy; and (3) costs associated with mitigation measures taken to meet an emissions reduction target that keeps the global average temperature increase to 2 °C. In this study, we combined a global computable general equilibrium model and a crop model (M-GAEZ), and we quantified the three impacts on risk of hunger through 2050 based on the uncertainty range associated with 12 climate models and one economic and demographic scenario. The strong mitigation measures aimed at attaining the 2 °C target reduce the negative effects of climate change on yields but have large negative impacts on the risk of hunger due to mitigation costs in the low-income countries. We also found that in a strongly carbon-constrained world, the change in food consumption resulting from mitigation measures depends more strongly on the change in incomes than the change in food prices.

Effective mitigation of debris flows at Lemon Dam, La Plata County, Colorado

Science.gov (United States)

deWolfe, V.G.; Santi, P.M.; Ey, J.; Gartner, J.E.

2008-01-01

To reduce the hazards from debris flows in drainage basins burned by wildfire, erosion control measures such as construction of check dams, installation of log erosion barriers (LEBs), and spreading of straw mulch and seed are common practice. After the 2002 Missionary Ridge Fire in southwest Colorado, these measures were implemented at Knight Canyon above Lemon Dam to protect the intake structures of the dam from being filled with sediment. Hillslope erosion protection measures included LEBs at concentrations of 220-620/ha (200-600% of typical densities), straw mulch was hand spread at concentrations up to 5.6??metric tons/hectare (125% of typical densities), and seeds were hand spread at 67-84??kg/ha (150% of typical values). The mulch was carefully crimped into the soil to keep it in place. In addition, 13 check dams and 3 debris racks were installed in the main drainage channel of the basin. The technical literature shows that each mitigation method working alone, or improperly constructed or applied, was inconsistent in its ability to reduce erosion and sedimentation. At Lemon Dam, however, these methods were effective in virtually eliminating sedimentation into the reservoir, which can be attributed to a number of factors: the density of application of each mitigation method, the enhancement of methods working in concert, the quality of installation, and rehabilitation of mitigation features to extend their useful life. The check dams effectively trapped the sediment mobilized during rainstorms, and only a few cubic meters of debris traveled downchannel, where it was intercepted by debris racks. Using a debris volume-prediction model developed for use in burned basins in the Western U.S., recorded rainfall events following the Missionary Ridge Fire should have produced a debris flow of approximately 10,000??m3 at Knight Canyon. The mitigation measures, therefore, reduced the debris volume by several orders of magnitude. For comparison, rainstorm

Fugitive emission inventory from Brazilian oil and gas industry (2000-2005) and discussion of mitigation measures

Energy Technology Data Exchange (ETDEWEB)

Carloni, Flavia A.; D' Avignon, Alexandre; La Rovere, Emilio L. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Centro Clima

2008-07-01

The objective of this work is to evaluate current emissions of GHGs within the Brazilian oil and gas industry, specifically the fugitive emissions arising from exploration and production. Besides, projects for mitigating these emissions and opportunities for the national industry are investigated. Results show that N{sub 2}O contributes little to fugitive emissions from the oil and gas industry, principally from gas sector. NMVOC emissions are significant, principally from the oil sector. In relation to CO{sub 2} and CH{sub 4} emissions, the oil sector emits more CO{sub 2} while the gas sector contributes more to CH{sub 4} emissions. In both sectors flaring is the activity that emits most CO{sub 2}. In relation to CH{sub 4} the principal contribution to emissions are from exploration and production onshore, although offshore activities as a whole play a greater part in the national industry. The results make it clear that the use of gas from flaring activity is a great opportunity for emission mitigation projects. From a business point of view, methane emissions could mean lost opportunities in selling natural gas. The Kyoto Protocol mechanisms, as the Clean Development Mechanism and Joint Implementation actions, provide the opportunity to stimulate investments in projects for reducing flaring and venting of associated gas. (author)

Mitigation - how to buy time

International Nuclear Information System (INIS)

Gunasekera, D.

2007-01-01

Full text: Full text: There is growing consensus in the global scientific community that human induced greenhouse gas emissions have increased the atmospheric concentration of these gases which has led, and will continue to lead to changes in regional and global climate. Climate change is projected to impact on Australian and global economic, biophysical, social and environmental systems. The impacts of climate change can be reduced by implementing a range of mitigation and adaptation strategies. The optimal policy response will depend on the relative costs and benefits of climate change impacts, and mitigation and adaptation responses. The focus in this presentation is to identify the key determinants that can reduce the cost of international mitigation responses. It is important to recognise that since cumulative emissions are the primary driver of atmospheric concentrations, mitigation policies should be assessed against their capacity to reduce cumulative emissions overtime, rather than at given time points only. If global greenhouse gas abatement costs are to be minimised, it is desirable that the coverage of countries, emission sources and technologies that are a part of any multilateral effort be as wide as possible. In this context the development and diffusion of clean technologies globally can play a key role in the future reduction of greenhouse gas emissions, according to scenarios analysed by ABARE. Furthermore, technology 'push' (for example, research and development policies) and 'pull' (for example, emission trading) policies will be required to achieve such an outcome

Bioenergy as a Mitigation Measure

Science.gov (United States)

Dass, P.; Brovkin, V.; Müller, C.; Cramer, W.

2011-12-01

Numerous studies have shown that bioenergy, being one of the renewable energies with the lowest costs, is expected to play an important role in the near future as climate change mitigation measure. Current practices of converting crop products such as carbohydrates or plant oils to ethanol or biodiesel have limited capabilities to curb emission. Moreover, they compete with food production for the most fertile lands. Thus, second generation bioenergy technologies are being developed to process lignocellulosic plant materials from fast growing tree and grass species. A number of deforestation experiments using Earth System models have shown that in the mid- to high latitudes, deforested surface albedo strongly increases in presence of snow. This biophysical effect causes cooling, which could dominate over the biogeochemical warming effect because of the carbon emissions due to deforestation. In order to find out the global bioenergy potential of extensive plantations in the mid- to high latitudes, and the resultant savings in carbon emissions, we use the dynamic global vegetation model LPJmL run at a high spatial resolution of 0.5°. It represents both natural and managed ecosystems, including the cultivation of cellulosic energy crops. LPJmL is run with 21st century projections of climate and atmospheric CO2 concentration based on the IPCC-SRES business as usual or A2 scenario. Latitudes above 45° in both hemispheres are deforested and planted with crops having the highest bioenergy return for the respective pixels of the model. The rest of the Earth has natural vegetation. The agricultural management intensity values are used such that it results in the best approximation for 1999 - 2003 national yields of wheat and maize as reported by FAOSTAT 2009. Four different scenarios of land management are used ranging from an idealistic or best case scenario, where all limitations of soil and terrain properties are managed to the worst case scenario where none of these

Modeling the greenhouse gas budget of straw returning in China: feasibility of mitigation and countermeasures.

Science.gov (United States)

Lu, Fei; Wang, Xiao-Ke; Han, Bing; Ouyang, Zhi-Yun; Zheng, Hua

2010-05-01

Straw returning is considered to be one of the most promising carbon sequestration measures in China's cropland. A compound model, namely "Straw Returning and Burning Model-Expansion" (SRBME), was built to estimate the net mitigation potential, economic benefits, and air pollutant reduction of straw returning. Three scenarios, that is, baseline, "full popularization of straw returning (FP)," and "full popularization of straw returning and precision fertilization (FP + P)," were set to reflect popularization of straw returning. The results of the SRBME indicated that (1) compared with the soil carbon sequestration of 13.37 Tg/yr, the net mitigation potentials, which were 6.328 Tg/yr for the FP scenario and 9.179 Tg/yr for the FP + P scenario, had different trends when the full budget of the greenhouse gases was considered; (2) when the feasibility in connection with greenhouse gas (GHG) mitigation, economic benefits, and environmental benefits was taken into consideration, straw returning was feasible in 15 provinces in the FP scenario, with a total net mitigation potential of 7.192 TgCe/yr and the total benefits of CNY 1.473 billion (USD 216.6 million); (3) in the FP + P scenario, with the implementation of precision fertilization, straw returning was feasible in 26 provinces with a total net mitigation potential of 10.39 TgCe/yr and the total benefits of CNY 5.466 billion (USD 803.8 million); (4) any extent of change in the treatment of straw from being burnt to being returned would contribute to air pollution reduction; (5) some countermeasures, such as CH(4) reduction in rice paddies, precision fertilization, financial support, education and propaganda, would promote the feasibility of straw returning as a mitigation measure.

Implementation of Moderator Circulation Test Temperature Measurement System

Energy Technology Data Exchange (ETDEWEB)

Lim, Yeong Muk; Hong, Seok Boong; Kim, Min Seok; Choi, Hwa Rim [KAERI, Daejeon (Korea, Republic of); Kim, Hyung Shin [Chungnam University, Daejeon (Korea, Republic of)

2016-05-15

Moderator Circulation Test(MCT) facility is 1/4 scale facility designed to reproduce the important characteristics of moderator circulation in a CANDU6 calandria under a range of operating conditions. MCT is an equipment with 380 acrylic pipes instead of the heater rods and a preliminary measurement of velocity field using PIV(Particle Image Velocimetry) is performed under the iso-thermal test conditions. The Korea Atomic Energy Research Institute (KAERI) started implementation of MCT Temperature Measurement System (TMS) using multiple infrared sensors. To control multiple infrared sensors, MCT TMS is implemented using National Instruments (NI) LabVIEW programming language. The MCT TMS is implemented to measure sensor data of multiple infrared sensors using the LabVIEW. The 35 sensor pipes of MCT TMS are divided into 2 ports to meet the minimum measurement time of 0.2 seconds. The software of MCT TMS is designed using collection function and processing function. The MCT TMS has the function of monitoring the states of multiple infrared sensors. The GUI screen of MCT TMS is composed of sensor pipe categories for user.

Implementation of Moderator Circulation Test Temperature Measurement System

International Nuclear Information System (INIS)

Lim, Yeong Muk; Hong, Seok Boong; Kim, Min Seok; Choi, Hwa Rim; Kim, Hyung Shin

2016-01-01

Moderator Circulation Test(MCT) facility is 1/4 scale facility designed to reproduce the important characteristics of moderator circulation in a CANDU6 calandria under a range of operating conditions. MCT is an equipment with 380 acrylic pipes instead of the heater rods and a preliminary measurement of velocity field using PIV(Particle Image Velocimetry) is performed under the iso-thermal test conditions. The Korea Atomic Energy Research Institute (KAERI) started implementation of MCT Temperature Measurement System (TMS) using multiple infrared sensors. To control multiple infrared sensors, MCT TMS is implemented using National Instruments (NI) LabVIEW programming language. The MCT TMS is implemented to measure sensor data of multiple infrared sensors using the LabVIEW. The 35 sensor pipes of MCT TMS are divided into 2 ports to meet the minimum measurement time of 0.2 seconds. The software of MCT TMS is designed using collection function and processing function. The MCT TMS has the function of monitoring the states of multiple infrared sensors. The GUI screen of MCT TMS is composed of sensor pipe categories for user

Implementation of emergency department transfer communication measures in Minnesota critical access hospitals.

Science.gov (United States)

Klingner, Jill; Moscovice, Ira; Casey, Michelle; McEllistrem Evenson, Alex

2015-01-01

Previously published findings based on field tests indicated that emergency department patient transfer communication measures are feasible and worthwhile to implement in rural hospitals. This study aims to expand those findings by focusing on the wide-scale implementation of these measures in the 79 Critical Access Hospitals (CAHs) in Minnesota from 2011 to 2013. Information was obtained from interviews with key informants involved in implementing the emergency department patient transfer communication measures in Minnesota as part of required statewide quality reporting. The first set of interviews targeted state-level organizations regarding their experiences working with providers. A second set of interviews targeted quality and administrative staff from CAHs regarding their experiences implementing measures. Implementing the measures in Minnesota CAHs proved to be successful in a number of respects, but informants also faced new challenges. Our recommendations, addressed to those seeking to successfully implement these measures in other states, take these challenges into account. Field-testing new quality measure implementations with volunteers may not be indicative of a full-scale implementation that requires facilities to participate. The implementation team's composition, communication efforts, prior relationships with facilities and providers, and experience with data collection and abstraction tools are critical factors in successfully implementing required reporting of quality measures on a wide scale. © 2014 National Rural Health Association.

Mitigation options in forestry, land-use change and biomass burning in Africa

Energy Technology Data Exchange (ETDEWEB)

Makundi, Willy R.L. [Univ. of California, Lawrence Berkeley National Lab. (United States)

1998-10-01

Mitigation options to reduce greenhouse gas emissions and sequester carbon in land use sectors are described in some detail. The paper highlights those options in the forestry sector, which are more relevant to different parts of Africa. It briefly outlines a bottom-up methodological framework for comprehensively assessing mitigation options in land use sectors. This method emphasizes the application of end-use demand projections to construct baseline and mitigation scenarios and explicitly addresses the carbon storage potential on land an in wood products, as well as use of wood to substitute for fossil fuels. Cost-effectiveness indicators for ranking mitigation options are proposed, including those which account for non-carbon monetary benefits such as those derived from forest products, as well as opportunity cost of pursuing specific mitigation option. The paper finally surveys the likely policies, barriers and incentives to implement such mitigation options in African countries. (au) 13 refs.

Mitigation Options in Forestry, Land-Use, Change and Biomass Burning in Africa

International Nuclear Information System (INIS)

Makundi, Willy R.

1998-01-01

Mitigation options to reduce greenhouse gas emissions and sequester carbon in land use sectors are describe in some detail. The paper highlights those options in the forestry sector, which are more relevant to different parts of Africa. It briefly outlines a bottom-up methodological framework for comprehensively assessing mitigation options in land use sectors. This method emphasizes the application of end-use demand projections to construct a baseline and mitigation scenarios and explicitly addresses the carbon storage potential on land and in wood products, as well as use of wood to substitute for fossil fuels. Cost-effectiveness indicators for ranking mitigation options are proposed, including those, which account for non-carbon monetary benefits such as those derived from forest products, as well as opportunity cost of pursuing specific mitigation option. The paper finally surveys the likely policies, barriers and incentives to implement such mitigation options in African countries.; copyrighted ; Y

Mitigation options in forestry, land-use change and biomass burning in Africa

International Nuclear Information System (INIS)

Makundi, Willy R.L.

1998-01-01

Mitigation options to reduce greenhouse gas emissions and sequester carbon in land use sectors are described in some detail. The paper highlights those options in the forestry sector, which are more relevant to different parts of Africa. It briefly outlines a bottom-up methodological framework for comprehensively assessing mitigation options in land use sectors. This method emphasizes the application of end-use demand projections to construct baseline and mitigation scenarios and explicitly addresses the carbon storage potential on land an in wood products, as well as use of wood to substitute for fossil fuels. Cost-effectiveness indicators for ranking mitigation options are proposed, including those which account for non-carbon monetary benefits such as those derived from forest products, as well as opportunity cost of pursuing specific mitigation option. The paper finally surveys the likely policies, barriers and incentives to implement such mitigation options in African countries. (au) 13 refs

How Effective Is Road Mitigation at Reducing Road-Kill? A Meta-Analysis.

Science.gov (United States)

Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A G; Fahrig, Lenore; Findlay, C Scott; Houlahan, Jeff; van der Ree, Rodney; van der Grift, Edgar A

2016-01-01

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these measures vary greatly. We conducted a meta-analysis using data from 50 studies that quantified the relationship between road-kill and a mitigation measure designed to reduce road-kill. Overall, mitigation measures reduce road-kill by 40% compared to controls. Fences, with or without crossing structures, reduce road-kill by 54%. We found no detectable effect on road-kill of crossing structures without fencing. We found that comparatively expensive mitigation measures reduce large mammal road-kill much more than inexpensive measures. For example, the combination of fencing and crossing structures led to an 83% reduction in road-kill of large mammals, compared to a 57% reduction for animal detection systems, and only a 1% for wildlife reflectors. We suggest that inexpensive measures such as reflectors should not be used until and unless their effectiveness is tested using a high-quality experimental approach. Our meta-analysis also highlights the fact that there are insufficient data to answer many of the most pressing questions that road planners ask about the effectiveness of road mitigation measures, such as whether other less common mitigation measures (e.g., measures to reduce traffic volume and/or speed) reduce road mortality, or to what extent the attributes of crossing structures and fences influence their effectiveness. To improve evaluations of mitigation effectiveness, studies should incorporate data collection before the mitigation is applied, and we recommend a

How Effective Is Road Mitigation at Reducing Road-Kill? A Meta-Analysis.

Directory of Open Access Journals (Sweden)

Trina Rytwinski

Full Text Available Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill. For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these measures vary greatly. We conducted a meta-analysis using data from 50 studies that quantified the relationship between road-kill and a mitigation measure designed to reduce road-kill. Overall, mitigation measures reduce road-kill by 40% compared to controls. Fences, with or without crossing structures, reduce road-kill by 54%. We found no detectable effect on road-kill of crossing structures without fencing. We found that comparatively expensive mitigation measures reduce large mammal road-kill much more than inexpensive measures. For example, the combination of fencing and crossing structures led to an 83% reduction in road-kill of large mammals, compared to a 57% reduction for animal detection systems, and only a 1% for wildlife reflectors. We suggest that inexpensive measures such as reflectors should not be used until and unless their effectiveness is tested using a high-quality experimental approach. Our meta-analysis also highlights the fact that there are insufficient data to answer many of the most pressing questions that road planners ask about the effectiveness of road mitigation measures, such as whether other less common mitigation measures (e.g., measures to reduce traffic volume and/or speed reduce road mortality, or to what extent the attributes of crossing structures and fences influence their effectiveness. To improve evaluations of mitigation effectiveness, studies should incorporate data collection before the mitigation is applied, and we

How Effective Is Road Mitigation at Reducing Road-Kill? A Meta-Analysis

Science.gov (United States)

Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A. G.; Fahrig, Lenore; Findlay, C. Scott; Houlahan, Jeff; van der Ree, Rodney; van der Grift, Edgar A

2016-01-01

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these measures vary greatly. We conducted a meta-analysis using data from 50 studies that quantified the relationship between road-kill and a mitigation measure designed to reduce road-kill. Overall, mitigation measures reduce road-kill by 40% compared to controls. Fences, with or without crossing structures, reduce road-kill by 54%. We found no detectable effect on road-kill of crossing structures without fencing. We found that comparatively expensive mitigation measures reduce large mammal road-kill much more than inexpensive measures. For example, the combination of fencing and crossing structures led to an 83% reduction in road-kill of large mammals, compared to a 57% reduction for animal detection systems, and only a 1% for wildlife reflectors. We suggest that inexpensive measures such as reflectors should not be used until and unless their effectiveness is tested using a high-quality experimental approach. Our meta-analysis also highlights the fact that there are insufficient data to answer many of the most pressing questions that road planners ask about the effectiveness of road mitigation measures, such as whether other less common mitigation measures (e.g., measures to reduce traffic volume and/or speed) reduce road mortality, or to what extent the attributes of crossing structures and fences influence their effectiveness. To improve evaluations of mitigation effectiveness, studies should incorporate data collection before the mitigation is applied, and we recommend a

Flood risk mitigation in Europe: how far away are we from the aspired forms of adaptive governance?

Directory of Open Access Journals (Sweden)

Marie Fournier

2016-12-01

Full Text Available Flood mitigation is a strategy that is growing in importance across Europe. This growth corresponds with an increasing emphasis on the need to learn to live with floods and make space for water. Flood mitigation measures aim at reducing the likelihood and magnitude of flooding and complement flood defenses. They are being put in place through the implementation of actions that accommodate (rather than resist water, such as natural flood management or adapted housing. The strategy has gained momentum over the past 20 years in an effort to improve the sustainability of flood risk management (FRM and facilitate the diversification of FRM in the pursuit of societal resilience to flooding. Simultaneously, it is increasingly argued that adaptive forms of governance are best placed to address the uncertainty and complexity associated with social-ecological systems responding to environmental challenges, such as flooding. However, there have been few attempts to examine the extent to which current flood risk governance, and flood mitigation specifically, reflect these aspired forms of adaptive governance. Drawing from EU research into flood risk governance, conducted within the STAR-FLOOD project, we examine the governance of flood mitigation in six European countries: Belgium, England, France, the Netherlands, Poland, and Sweden. Using in-depth policy and legal analysis, as well as interviews with key actors, the governance and implementation of flood mitigation in these countries is evaluated from the normative viewpoint of whether, and to what extent, it can be characterized as adaptive governance. We identify five criteria of adaptive governance based on a comprehensive literature review and apply these to each country to determine the "distance" between current governance arrangements and adaptive governance. In conclusion, the flood mitigation strategy provides various opportunities for actors to further pursue forms of adaptive governance. The

IDF Sagebrush Habitat Mitigation Project: FY2008 Compensation Area Monitoring Report

Energy Technology Data Exchange (ETDEWEB)

Durham, Robin E.; Sackschewsky, Michael R.

2008-09-01

This document provides a review and status of activities conducted in support of the CH2MHill Hanford Group (CHG) Compensatory Mitigation Implementation Plan (MIP) for the Integrated Disposal Facility (IDF). It includes time-zero monitoring results for planting activities conducted in December 2007, annual survival monitoring for all planting years, a summary of artificial burrow observations, and recommendations for the successful completion of DOE mitigation commitments for this project.

Mitigating flood exposure

Science.gov (United States)

Shultz, James M; McLean, Andrew; Herberman Mash, Holly B; Rosen, Alexa; Kelly, Fiona; Solo-Gabriele, Helena M; Youngs Jr, Georgia A; Jensen, Jessica; Bernal, Oscar; Neria, Yuval

2013-01-01

Introduction. In 2011, following heavy winter snowfall, two cities bordering two rivers in North Dakota, USA faced major flood threats. Flooding was foreseeable and predictable although the extent of risk was uncertain. One community, Fargo, situated in a shallow river basin, successfully mitigated and prevented flooding. For the other community, Minot, located in a deep river valley, prevention was not possible and downtown businesses and one-quarter of the homes were inundated, in the city’s worst flood on record. We aimed at contrasting the respective hazards, vulnerabilities, stressors, psychological risk factors, psychosocial consequences, and disaster risk reduction strategies under conditions where flood prevention was, and was not, possible. Methods. We applied the “trauma signature analysis” (TSIG) approach to compare the hazard profiles, identify salient disaster stressors, document the key components of disaster risk reduction response, and examine indicators of community resilience. Results. Two demographically-comparable communities, Fargo and Minot, faced challenging river flood threats and exhibited effective coordination across community sectors. We examined the implementation of disaster risk reduction strategies in situations where coordinated citizen action was able to prevent disaster impact (hazard avoidance) compared to the more common scenario when unpreventable disaster strikes, causing destruction, harm, and distress. Across a range of indicators, it is clear that successful mitigation diminishes both physical and psychological impact, thereby reducing the trauma signature of the event. Conclusion. In contrast to experience of historic flooding in Minot, the city of Fargo succeeded in reducing the trauma signature by way of reducing risk through mitigation. PMID:28228985

Preventable and mitigable adverse events in cancer care: Measuring risk and harm across the continuum.

Science.gov (United States)

Lipitz-Snyderman, Allison; Pfister, David; Classen, David; Atoria, Coral L; Killen, Aileen; Epstein, Andrew S; Anderson, Christopher; Fortier, Elizabeth; Weingart, Saul N

2017-12-01

Patient safety is a critical concern in clinical oncology, but the ability to measure adverse events (AEs) across cancer care is limited by a narrow focus on treatment-related toxicities. The objective of this study was to assess the nature and extent of AEs among cancer patients across inpatient and outpatient settings. This was a retrospective cohort study of 400 adult patients selected by stratified random sampling who had breast (n = 128), colorectal (n = 136), or lung cancer (n = 136) treated at a comprehensive cancer center in 2012. Candidate AEs, or injuries due to medical care, were identified by trained nurse reviewers over the course of 1 year from medical records and safety-reporting databases. Physicians determined the AE harm severity and the likelihood of preventability and harm mitigation. The 400-patient sample represented 133,358 days of follow-up. Three hundred four AEs were identified for an overall rate of 2.3 events per 1000 patient days (91.2 per 1000 inpatient days and 0.9 per 1000 outpatient days). Thirty-four percent of the patients had 1 or more AEs (95% confidence interval, 29%-39%), and 16% of the patients had 1 or more preventable or mitigable AEs (95% confidence interval, 13%-20%). The AE rate for patients with breast cancer was lower than the rate for patients with colorectal or lung cancer (P ≤ .001). The preventable or mitigable AE rate was 0.9 per 1000 patient days. Six percent of AEs and 4% of preventable AEs resulted in serious harm. Examples included lymphedema, abscess, and renal failure. A heavy burden of AEs, including preventable or mitigable events, has been identified. Future research should examine risk factors and improvement strategies for reducing their burden. Cancer 2017;123:4728-4736. © 2017 American Cancer Society. © 2017 American Cancer Society.

A survey on the perceived need and value of decision-support tools for joint mitigation of air pollution and climate change in cities

Directory of Open Access Journals (Sweden)

Erika von Schneidemesser

2017-11-01

Full Text Available Decision-support tools are increasingly popular for informing policy decisions linked to environmental issues. For example, a number of decision-support tools on transport planning provide information on expected effects of different measures (actions, policies, or interventions on air quality, often combined with information on noise pollution or mitigation costs. These tools range in complexity and scale of applicability, from city to international, and include one or several polluting sectors. However, evaluation of the need and utility of tools to support decisions on such linked issues is often lacking, especially for tools intended to support local authorities at the city scale. Here we assessed the need for and value of combining air pollution and climate change mitigation measures into one decision-support tool and the existing policy context in which such a tool might be used. We developed a prototype decision-support tool for evaluating measures for coordinated management of air quality and climate change; and administered a survey in which respondents used the prototype to answer questions about demand for such tools and requirements to make them useful. Additionally, the survey asked questions about participants’ awareness of linkages between air pollution and climate change that are crucial for considering synergies and trade-offs among mitigation measures. Participants showed a high understanding of the linkages between air pollution and climate change, especially recognizing that emissions of greenhouse gases and air pollutants come from the same source. Survey participants were: European, predominantly German; employed across a range of governmental, non-governmental and research organizations; and responsible for a diversity of issues, primarily involving climate change, air pollution or environment. Survey results showed a lack of awareness of decision-support tools and little implementation or regular use. However

Radon mitigation in private dwellings. Summary of measures under the National Action Plan against Cancer in Norway 1999-2003

International Nuclear Information System (INIS)

Aanestad, K.; Strand, T.; Hoegmo, T.; Skjennem, M.; Jensen, C. L.; Hoelsbrekken, S.

2006-01-01

The report summarizes the remedial measurements carried out under the National Action Plan against Cancer in Norway in the period 1999-2003.The cost effectiveness of the state subsidized remedial measures against radon is evaluated. Other measurements under the National Action Plan against Cancer have also been evaluated, such as measurements of radon in 38.000 dwellings in 158 municipalities, information measures, and actions to increase radon mitigation competence in the building construction industry and in the municipalities. (Author)

40 CFR 93.160 - Mitigation of air quality impacts.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Mitigation of air quality impacts. 93... quality impacts. (a) Any measures that are intended to mitigate air quality impacts must be identified and..., the revised text is set forth as follows: § 93.160 Mitigation of air quality impacts. (e) When...

Radiation protection measurement. Philosophy and implementation

International Nuclear Information System (INIS)

Recht, P.; Lakey, J.R.A.

1975-01-01

A selection from the proceedings of the International Symposium held by the U.K. Society for radiological protection in June 1974 was presented. The central theme was the philosophy of radiation protection measurement and its interpretation although some specific areas of good health physics practice were included. The 28 papers selected were chosen to be either representative of the central theme or of wider interest. The papers have been grouped in 6 main sections: philosophy of measurements; interpretation of measurements; implementation by legislation and monitoring; radiation exposure and control; reactor safety and siting; accidents

Influence of behavioral biases on the assessment of multi-hazard risks and the implementation of multi-hazard risks mitigation measures: case study of multi-hazard cyclone shelters in Tamil Nadu, India

Science.gov (United States)

Komendantova, Nadejda; Patt, Anthony

2013-04-01

In December 2004, a multiple hazards event devastated the Tamil Nadu province of India. The Sumatra -Andaman earthquake with a magnitude of Mw=9.1-9.3 caused the Indian Ocean tsunami with wave heights up to 30 m, and flooding that reached up to two kilometers inland in some locations. More than 7,790 persons were killed in the province of Tamil Nadu, with 206 in its capital Chennai. The time lag between the earthquake and the tsunami's arrival in India was over an hour, therefore, if a suitable early warning system existed, a proper means of communicating the warning and shelters existing for people would exist, than while this would not have prevented the destruction of infrastructure, several thousands of human lives would have been saved. India has over forty years of experience in the construction of cyclone shelters. With additional efforts and investment, these shelters could be adapted to other types of hazards such as tsunamis and flooding, as well as the construction of new multi-hazard cyclone shelters (MPCS). It would therefore be possible to mitigate one hazard such as cyclones by the construction of a network of shelters while at the same time adapting these shelters to also deal with, for example, tsunamis, with some additional investment. In this historical case, the failure to consider multiple hazards caused significant human losses. The current paper investigates the patterns of the national decision-making process with regards to multiple hazards mitigation measures and how the presence of behavioral and cognitive biases influenced the perceptions of the probabilities of multiple hazards and the choices made for their mitigation by the national decision-makers. Our methodology was based on the analysis of existing reports from national and international organizations as well as available scientific literature on behavioral economics and natural hazards. The results identified several biases in the national decision-making process when the

Land-Based Mitigation Strategies under the Mid-Term Carbon Reduction Targets in Indonesia

Directory of Open Access Journals (Sweden)

Tomoko Hasegawa

2016-12-01

Full Text Available We investigated the key mitigation options for achieving the mid-term target for carbon emission reduction in Indonesia. A computable general equilibrium model coupled with a land-based mitigation technology model was used to evaluate specific mitigation options within the whole economic framework. The results revealed three primary findings: (1 If no climate policy were implemented, Indonesia’s total greenhouse gas emissions would reach 3.0 GtCO2eq by 2030; (2 To reduce carbon emissions to meet the latest Intended Nationally-Determined Contributions (INDC target, ~58% of total reductions should come from the agriculture, forestry and other land use sectors by implementing forest protection, afforestation and plantation efforts; (3 A higher carbon price in 2020 suggests that meeting the 2020 target would be economically challenging, whereas the INDC target for 2030 would be more economically realistic in Indonesia.

Teachers' Initial and Sustained Use of an Instructional Assistive Technology Tool: Exploring the Mitigating Factors

Science.gov (United States)

Bouck, Emily C.; Flanagan, Sara; Heutsche, Anne; Okolo, Cynthia M.; Englert, Carol Sue

2011-01-01

This qualitative research project explored factors that mitigated teachers implementing an instructional assistive technology and factors that mitigated its sustained use. Specifically, it explored these issues in relation to a social studies based instructional assistive technology (Virtual History Museum [VHM]), which was originally implemented…

Optimum cooling of data centers application of risk assessment and mitigation techniques

CERN Document Server

Dai, Jun; Das, Diganta; Pecht, Michael G

2014-01-01

This book provides data center designers and operators with methods by which to assess and mitigate the risks associated with utilization of optimum cooling solutions. The goal is to provide readers with sufficient knowledge to implement measures such as free air cooling or direct liquid immersion cooling properly, or combination of existing and emerging cooling technologies in data centers, base stations, and server farms. This book also: Discusses various telecommunication infrastructures, with an emphasis on data centers and base stations Covers the most commonly known energy and power management techniques, as well as emerging cooling solutions for data centers Describes the risks to the electronic equipment fitted in these installations and the methods of risk mitigation Devotes  a particular focus to an up-to-date review of the emerging cooling methods (such as free air cooling and direct liquid immersion cooling) and tools and best practices for designers, technology developers, installation operators...

Knowledge, risk perception and mitigation measures towards Ebola virus disease by potentially exposed bushmeat handlers in north-central Nigeria: Any critical gap?

Science.gov (United States)

Alhaji, N B; Yatswako, S; Oddoh, E Y

2018-02-01

The bushmeat industry has been a topic of increasing importance among public health officials for its influence on zoonotic diseases transmission, such as Ebola virus disease (EVD), a rare and severe infectious disease of humans and non-human primates. This survey assessed knowledge/awareness, risk perceptions and mitigation practices towards EVD among bushmeat handlers in north-central Nigeria. These characteristics are premise to level of preparedness against appropriate risk prevention and control. A questionnaire-based cross-sectional study was conducted between January and December 2015 on 395 bushmeat handlers. Descriptive and analytical statistical analyses were performed using Epi-Info 3.5.3 software, and p knowledge than the hunters. Handlers with tertiary education were more likely (OR 3.22; 95% CI: 1.56-6.67) to possess significant satisfactory knowledge/awareness about EVD. Also, vendors were more likely (OR 1.85; 95% CI: 1.01-3.42) to practice satisfactory mitigation measures than the hunters. Only handlers with tertiary education were more likely (OR 2.48; 95% CI: 1.26-4.89) to significantly practice satisfactory mitigation measures against EVD. Although most of the handlers possessed significant knowledge/awareness about EVD, few applied mitigation measures against its infection, which is the challenging gap. There is a need for collaborations between the public health, veterinary and wildlife authorities in the provision of health information to bushmeat handlers on better management of emerging and re-emerging zoonotic viral diseases of wildlife origin. © 2017 Blackwell Verlag GmbH.

Considerations on comprehensive risk assessment and mitigation planning of volcanic ash-fall

International Nuclear Information System (INIS)

Toshida, Kiyoshi

2010-01-01

Volcanic ash-fall is inevitable hazard throughout Japan, and causes wide range of effects due to its physical and chemical properties. Nuclear power plants in Japan face the necessity to assess the risk from volcanic ash-fall. Risk assessment of the volcanic ash-fall should include engineering solution and mitigation planning as well as the ash-fall hazard. This report points out the characteristics for reducing the various effects of volcanic ash-fall as follows. Large-scale eruptions produce prominent volcanic ash-falls that can approach power plants at a great distance. Aftermath hazards of ash-fall events, such as remobilization of fine ash particles and generation of lahars, require further assessments. The kind and extent of damages becomes greater whenever ash is wet. Wet ash requires separate assessments in contrast to dry ash. The mitigation and recovery measures at power plants involve quick cleanup operations of volcanic ash. Those operations should be prepared through comprehensive risk assessment, and by cooperation with authorities, during pre-eruption repose period. The comprehensive assessment for volcanic ash-fall hazards, however, has yet to be conducted. Development of risk communication method may result in increased implementation mitigation planning. Numerical analysis of the ash-fall hazards provides quantitative data on particle motions that can be used in the risk assessment. In order to implement the quantitative assessment method, the verification on the effect of ambient air condition to the altitude of volcanic ash cloud is necessary. We need to develop a three-dimensional model of volcanic ash cloud, and calculate motions of ash clouds under multiple conditions of ambient air. (author)

Cost effectiveness of GHG mitigation options and policy implication

Energy Technology Data Exchange (ETDEWEB)

Lim, K. S. [Korea Institute for Industrial Economics and Trade, Seoul (Korea, Republic of)

1998-04-01

This paper represents the summary findings and conclusions of several studies implemented about microeconomics and macroeconomics marginal costs of GHG abatement policies. Financial, economic, and, where possible, environmental microeconomics costs of reducing GHGs are estimated by a World Bank team. Six energy-related CO{sub 2} mitigation policy options are applied to estimate the macroeconomics costs of GHG emission reduction, the macroeconomics impacts on the Chinese economy. In terms of policy, conservation is a better option to cope with a restrictive mitigation constraint, assuming a developing country can achieve planned energy-saving targets. Without a CO{sub 2} emission constraint or with less restrictive CO{sub 2} emission constraints, however, the simulation results indicate that a conservation strategy may be less attractive than fuel substitution in a developing country, mainly due to the economic dampening effect of reduced production in the energy sectors. This finding suggests that an often-cited costless or negative-cost energy conservation policy may not be a better option when a less restrictive mitigation target is in force. This does not mean that the potential for energy efficiency improvements in a developing country is not worthwhile, but that the overall macroeconomics impacts should be considered before implementing the policy option. (author). 9 refs., 3 figs., 3 tabs.

Drainage filter technologies to mitigate site-specific phosphorus losses in agricultural drainage discharge

DEFF Research Database (Denmark)

Kjærgaard, Charlotte; Heckrath, Goswin Johann; Canga, Eriona

in drainage. The Danish “SUPREME-TECH” project (2010-2016) (www.supreme-tech.dk) aims at providing the scientific basis for developing cost-effective filter technologies for P in agricultural drainage waters. The project studies different approaches of implementing filter technologies including drainage well....... Targeting high risk areas of P loss and applying site-specific measures promises to be a cost-efficient approach. The Danish Commission for Nature and Agriculture has, therefore, now called for a paradigm shift towards targeted, cost-efficient technologies to mitigate site-specific nutrient losses...... environmental threshold values (

Study On Safeguard Measures for Implementing Overall Planning of Land Use

Institute of Scientific and Technical Information of China (English)

2011-01-01

Based on minutely analysing the main problems existing in safeguard measures for implementing a new round of overall planning of land use,this paper constructs implementation security system of overall planning of land use,and puts forward the principles and basis of formulating safeguard measures for implementing overall planning of land use.Finally,this paper establishes the content system of safeguard measures:effectively strengthen social supervision;strengthen administrative management of land use planning;strengthen economic management of land use planning;reinforce the legal status of planning;establish incentive and constraint mechanism for reinforcing implementation;improve support system of planning.

Find a Radon Test Kit or Measurement and Mitigation Professional

Science.gov (United States)

Find a qualified radon service professional to fix or mitigate your home. If you have questions about a radon, you should contact your state radon contact and/or contact one or both of the two privately-run National Radon Proficiency Programs

Dynamic strain measurement system with fiber Bragg gratings and noise mitigation techniques

International Nuclear Information System (INIS)

Tosi, D; Olivero, M; Perrone, G

2009-01-01

A low-cost fiber Bragg grating (FBG) vibrometer specifically suited for structural monitoring and aimed at the detection of low-amplitude vibrations is presented. The optical system exploits an intensity modulation principle of operation, while signal processing techniques are used to complement the transducer to improve the performances: a recursive least-squares adaptive filter improves the noise power mitigation by 14 dB, and an efficient spectral estimator permits operating spectral analysis even under high noise conditions. With these methods, a strain sensitivity of 5.6 nε has been achieved in the ±60 µε range. Experimental assessment tests carried out in typical structural monitoring contexts have demonstrated that the developed sensor is well suited to measure mechanical perturbations of different structures

Measures to implement the Chemical Weapons Convention

International Nuclear Information System (INIS)

Tanzman, E.; Kellman, B.

1999-01-01

This seminar is another excellent opportunity for those involved in preventing chemical weapons production and use to learn from each other about how the Chemical Weapons Convention (CWC) can become a foundation of arms control in Africa and around the world. The author is grateful to the staff of the Organization for the Prohibition of Chemical Weapons (OPCW) for inviting him to address this distinguished seminar. The views expressed in this paper are those of the authors alone, and do not represent the position of the government of the US nor or of any other institution. In 1993, as the process of CWC ratification was beginning, concerns arose that the complexity of integrating the treaty with national law would cause each nation to implement the Convention without regard to what other nations were doing, thereby causing inconsistencies among States Parties in how the Convention would be carried out. As a result the Manual for National Implementation of the Chemical Weapons Convention was prepared and presented it to each national delegation at the December 1993 meeting of the Preparatory Commission in The Hague. During its preparation, the Manual was reviewed by the Committee of Legal Experts on National Implementation of the Chemical Weapons Convention, a group of distinguished international jurists, law professors, legally-trained diplomats, government officials, and Parliamentarians from every region of the world, including Mica. In February 1998, the second edition of the Manual was published in order to update it in light of developments since the CWC entered into force on 29 April 1997. The second edition 1998 clarified the national implementation options to reflect post-entry-into-force thinking, added extensive references to national implementing measures that had been enacted by various States Parties, and included a prototype national implementing statute developed by the authors to provide a starting point for those whose national implementing

Measures to implement the Chemical Weapons Convention

Energy Technology Data Exchange (ETDEWEB)

Tanzman, E.; Kellman, B.

1999-11-05

This seminar is another excellent opportunity for those involved in preventing chemical weapons production and use to learn from each other about how the Chemical Weapons Convention (CWC) can become a foundation of arms control in Africa and around the world. The author is grateful to the staff of the Organization for the Prohibition of Chemical Weapons (OPCW) for inviting him to address this distinguished seminar. The views expressed in this paper are those of the authors alone, and do not represent the position of the government of the US nor or of any other institution. In 1993, as the process of CWC ratification was beginning, concerns arose that the complexity of integrating the treaty with national law would cause each nation to implement the Convention without regard to what other nations were doing, thereby causing inconsistencies among States Parties in how the Convention would be carried out. As a result the Manual for National Implementation of the Chemical Weapons Convention was prepared and presented it to each national delegation at the December 1993 meeting of the Preparatory Commission in The Hague. During its preparation, the Manual was reviewed by the Committee of Legal Experts on National Implementation of the Chemical Weapons Convention, a group of distinguished international jurists, law professors, legally-trained diplomats, government officials, and Parliamentarians from every region of the world, including Mica. In February 1998, the second edition of the Manual was published in order to update it in light of developments since the CWC entered into force on 29 April 1997. The second edition 1998 clarified the national implementation options to reflect post-entry-into-force thinking, added extensive references to national implementing measures that had been enacted by various States Parties, and included a prototype national implementing statute developed by the authors to provide a starting point for those whose national implementing

Assessing existing drought monitoring and forecasting capacities, mitigation and adaptation practices in Africa

Science.gov (United States)

Nyabeze, W. R.; Dlamini, L.; Lahlou, O.; Imani, Y.; Alaoui, S. B.; Vermooten, J. S. A.

2012-04-01

Drought is one of the major natural hazards in many parts of the world, including Africa and some regions in Europe. Drought events have resulted in extensive damages to livelihoods, environment and economy. In 2011, a consortium consisting of 19 organisations from both Africa and Europe started a project (DEWFORA) aimed at developing a framework for the provision of early warning and response through drought impact mitigation for Africa. This framework covers the whole chain from monitoring and vulnerability assessment to forecasting, warning, response and knowledge dissemination. This paper presents the first results of the capacity assessment of drought monitoring and forecasting systems in Africa, the existing institutional frameworks and drought mitigation and adaptation practices. Its focus is particularly on the historical drought mitigation and adaptation actions identified in the North Africa - Maghreb Region (Morocco, Algeria and Tunisia) and in the Southern Africa - Limpopo Basin. This is based on an extensive review of historical drought experiences. From the 1920's to 2009, the study identified 37 drought seasons in the North African - Maghreb Region and 33 drought seasons in the Southern Africa - Limpopo Basin. Existing literature tends to capture the spatial extent of drought at national and administrative scale in great detail. This is driven by the need to map drought impacts (food shortage, communities affected) in order to inform drought relief efforts (short-term drought mitigation measures). However, the mapping of drought at catchment scale (hydrological unit), required for longer-term measures, is not well documented. At regional level, both in North Africa and Southern Africa, two organisations are involved in drought monitoring and forecasting, while at national level 22 organisations are involved in North Africa and 37 in Southern Africa. Regarding drought related mitigation actions, the inventory shows that the most common actions

Single-step digital backpropagation for nonlinearity mitigation

DEFF Research Database (Denmark)

Secondini, Marco; Rommel, Simon; Meloni, Gianluca

2015-01-01

Nonlinearity mitigation based on the enhanced split-step Fourier method (ESSFM) for the implementation of low-complexity digital backpropagation (DBP) is investigated and experimentally demonstrated. After reviewing the main computational aspects of DBP and of the conventional split-step Fourier...... in the computational complexity, power consumption, and latency with respect to a simple feed-forward equalizer for bulk dispersion compensation....

Implementation Measurement for Evidence-Based Violence Prevention Programs in Communities.

Science.gov (United States)

Massetti, Greta M; Holland, Kristin M; Gorman-Smith, Deborah

2016-08-01

Increasing attention to the evaluation, dissemination, and implementation of evidence-based programs (EBPs) has led to significant advancements in the science of community-based violence prevention. One of the prevailing challenges in moving from science to community involves implementing EBPs and strategies with quality. The CDC-funded National Centers of Excellence in Youth Violence Prevention (YVPCs) partner with communities to implement a comprehensive community-based strategy to prevent violence and to evaluate that strategy for impact on community-wide rates of violence. As part of their implementation approach, YVPCs document implementation of and fidelity to the components of the comprehensive youth violence prevention strategy. We describe the strategies and methods used by the six YVPCs to assess implementation and to use implementation data to inform program improvement efforts. The information presented describes the approach and measurement strategies employed by each center and for each program implemented in the partner communities. YVPCs employ both established and innovative strategies for measurement and tracking of implementation across a broad range of programs, practices, and strategies. The work of the YVPCs highlights the need to use data to understand the relationship between implementation of EBPs and youth violence outcomes.

The passage and initial implementation of Oregon's Measure 44

Science.gov (United States)

Goldman, L.; Glantz, S.

1999-01-01

OBJECTIVE—To prepare a history of the passage and early implementation of Ballot Measure 44, "An Act to Support the Oregon Health Plan", and tobacco control policymaking in Oregon. Measure 44 raised cigarette taxes in Oregon by US$0.30 per pack, and dedicated 10% of the revenues to tobacco control.
METHODS—Data were gathered from interviews with members of the Committee to Support the Oregon Health Plan, Measure 44's campaign committee, as well as with state and local officials, and tobacco control advocates. Additional information was obtained from public documents, internal memoranda, and news reports.
RESULTS—Although the tobacco industry outspent Measure 44's supporters 7 to 1, the initiative passed with 56% of the vote. Even before the election, tobacco control advocates were working to develop an implementation plan for the tobacco control programme. They mounted a successful lobbying campaign to see that the legislature did not divert tobacco control funds to other uses. They also stopped industry efforts to limit the scope of the programme. The one shortcoming of the tobacco control forces was not getting involved in planning the initiative early enough to influence the amount of money that was devoted to tobacco control. Although public health groups provided 37% of the money it cost to pass Measure 44, only 10% of revenues were devoted to tobacco control.
CONCLUSIONS—Proactive planning and aggressive implementation can secure passage of tobacco control initiatives and see that the associated implementing legislation follows good public health practice.


Keywords: advocacy; legislation; implementation; tobacco tax PMID:10599577

Towards demand-side solutions for mitigating climate change

Science.gov (United States)

Creutzig, Felix; Roy, Joyashree; Lamb, William F.; Azevedo, Inês M. L.; Bruine de Bruin, Wändi; Dalkmann, Holger; Edelenbosch, Oreane Y.; Geels, Frank W.; Grubler, Arnulf; Hepburn, Cameron; Hertwich, Edgar G.; Khosla, Radhika; Mattauch, Linus; Minx, Jan C.; Ramakrishnan, Anjali; Rao, Narasimha D.; Steinberger, Julia K.; Tavoni, Massimo; Ürge-Vorsatz, Diana; Weber, Elke U.

2018-04-01

Research on climate change mitigation tends to focus on supply-side technology solutions. A better understanding of demand-side solutions is missing. We propose a transdisciplinary approach to identify demand-side climate solutions, investigate their mitigation potential, detail policy measures and assess their implications for well-being.

Global climate change: Implications, challenges, and mitigation measures

International Nuclear Information System (INIS)

Majumdar, S.K.

1992-01-01

This book presents a perspective of the potential problem of global climate change induced by human activity. The editors have presented viewpoints of experts (advocates and skeptics) representing the issues of climate change. Possible results from long-term global change discussed in this book include mass migrations of plants and animals; changes in crop yields; flood and drought; and economic, political, and cultural changes. The text contains 20 chapters on the impact of global climate change and 10 chapters on the mitigation of effects and policy development

Technology learning for renewable energy: Implications for South Africa's long-term mitigation scenarios

Energy Technology Data Exchange (ETDEWEB)

Winkler, Harald, E-mail: Harald.Winkler@uct.ac.z [Energy Research Centre, University of Cape Town, Private Bag, Rondebosch 7701 (South Africa); Hughes, Alison [Energy Research Centre, University of Cape Town, Private Bag, Rondebosch 7701 (South Africa); Haw, Mary [PJ Carew Consulting, 103 Hout Street, Cape Town 8001 (South Africa)

2009-11-15

Technology learning can make a significant difference to renewable energy as a mitigation option in South Africa's electricity sector. This article considers scenarios implemented in a Markal energy model used for mitigation analysis. It outlines the empirical evidence that unit costs of renewable energy technologies decline, considers the theoretical background and how this can be implemented in modeling. Two scenarios are modelled, assuming 27% and 50% of renewable electricity by 2050, respectively. The results show a dramatic shift in the mitigation costs. In the less ambitious scenario, instead of imposing a cost of Rand 52/t CO{sub 2}-eq (at 10% discount rate), reduced costs due to technology learning turn renewables into negative cost option. Our results show that technology learning flips the costs, saving R143. At higher penetration rate, the incremental costs added beyond the base case decline from R92 per ton to R3. Including assumptions about technology learning turns renewable from a higher-cost mitigation option to one close to zero. We conclude that a future world in which global investment in renewables drives down unit costs makes it a much more cost-effective and sustainable mitigation option in South Africa.

Urban Policies and Earthquake Risk Mitigation

International Nuclear Information System (INIS)

Sarlo, Antonella

2008-01-01

The paper aims at proposing some considerations about some recent experiences of research carried out on the theme of earthquake risk mitigation and combining policies and actions of mitigation with urban development strategies. The objective was to go beyond the classical methodological approach aiming at defining a 'technical' evaluation of the earthquake risk through a procedure which can correlate the three 'components' of danger, exposure and vulnerability. These researches experiment, in terms of methodology and application, with a new category of interpretation and strategy: the so-called Struttura Urbana Minima (Minimum urban structure).Actually, the introduction of the Struttura Urbana Minima establishes a different approach towards the theme of safety in the field of earthquake risk, since it leads to a wider viewpoint, combining the building aspect of the issue with the purely urban one, involving not only town planning, but also social and managerial implications.In this sense the constituent logic of these researches is strengthened by two fundamental issues:- The social awareness of earthquake;- The inclusion of mitigation policies in the ordinary strategies for town and territory management. Three main aspects of the first point, that is of the 'social awareness of earthquake', characterize this issue and demand to be considered within a prevention policy:- The central role of the risk as a social production,- The central role of the local community consent,- The central role of the local community capability to planTherefore, consent, considered not only as acceptance, but above all as participation in the elaboration and implementation of choices, plays a crucial role in the wider issue of prevention policies.As far as the second point is concerned, the inclusion of preventive mitigation policies in ordinary strategies for the town and territory management demands the identification of criteria of choice and priorities of intervention and, as a

Advancing implementation science through measure development and evaluation: a study protocol.

Science.gov (United States)

Lewis, Cara C; Weiner, Bryan J; Stanick, Cameo; Fischer, Sarah M

2015-07-22

Significant gaps related to measurement issues are among the most critical barriers to advancing implementation science. Three issues motivated the study aims: (a) the lack of stakeholder involvement in defining pragmatic measure qualities; (b) the dearth of measures, particularly for implementation outcomes; and (c) unknown psychometric and pragmatic strength of existing measures. Aim 1: Establish a stakeholder-driven operationalization of pragmatic measures and develop reliable, valid rating criteria for assessing the construct. Aim 2: Develop reliable, valid, and pragmatic measures of three critical implementation outcomes, acceptability, appropriateness, and feasibility. Aim 3: Identify Consolidated Framework for Implementation Research and Implementation Outcome Framework-linked measures that demonstrate both psychometric and pragmatic strength. For Aim 1, we will conduct (a) interviews with stakeholder panelists (N = 7) and complete a literature review to populate pragmatic measure construct criteria, (b) Q-sort activities (N = 20) to clarify the internal structure of the definition, (c) Delphi activities (N = 20) to achieve consensus on the dimension priorities, (d) test-retest and inter-rater reliability assessments of the emergent rating system, and (e) known-groups validity testing of the top three prioritized pragmatic criteria. For Aim 2, our systematic development process involves domain delineation, item generation, substantive validity assessment, structural validity assessment, reliability assessment, and predictive validity assessment. We will also assess discriminant validity, known-groups validity, structural invariance, sensitivity to change, and other pragmatic features. For Aim 3, we will refine our established evidence-based assessment (EBA) criteria, extract the relevant data from the literature, rate each measure using the EBA criteria, and summarize the data. The study outputs of each aim are expected to have a positive impact

Mitigating for nature in Danish infrastructure projects

DEFF Research Database (Denmark)

Larsen, Sanne Vammen; Kørnøv, Lone; Christensen, Per

2015-01-01

his paper presents results of a Danish study of mitigation efforts directed at nature protection in EIA of Danish infrastructure projects. The projects included in the study comprise road, rail, bridges, tunnels cables and oil- and gas-pipes. The study is based on a document analysis of EIA reports......, a workshop held with EIA professionals, a study of two cases and a survey among EIA professionals. The study reveals whether and how the mitigation hierarchy has been adhered to and what types of mitigation measures have been suggested. The study digs a bit deeper in discussing the dynamics in which...

Radon mitigation experience in difficult-to-mitigate schools

International Nuclear Information System (INIS)

Leovic, K.W.; Craig, A.B.

1990-01-01

Initial radon mitigation experience in schools has shown sub-slab depressurization (SSD) to be generally effective in reducing elevated levels of radon in schools that have a continuous layer of clean, coarse aggregate underneath the slab. However, mitigation experience is limited in schools without sub-slab aggregate and in schools with characteristics such as return-air ductwork underneath the slab or unducted return-air plenums in the drop ceiling that are open to the sub-slab area (via open tops of block walls). Mitigation of schools with utility tunnels and of schools constructed over crawl spaces is also limited. Three Maryland schools exhibiting some of the above characteristics are being researched to help understand the mechanisms that control radon entry and mitigation in schools where standard SSD systems are not effective. This paper discusses specific characteristics of potentially difficult-to-mitigate schools and, where applicable, details examples from the three Maryland schools

Cost-effectiveness of greenhouse gases mitigation measures in the European agro-forestry sector: a literature survey

International Nuclear Information System (INIS)

Povellato, Andrea; Bosello, Francesco; Giupponi, Carlo

2007-01-01

Over the last 20 years, climate change has become an increasing concern for scientists, public opinions and policy makers. Due to the pervasive nature of its impacts for many important aspects of human life, climate change is likely to influence and be influenced by the most diverse policy or management choices. This is particularly true for those interventions affecting agriculture and forestry: they are strongly dependent on climate phenomena, but also contribute to climate evolution being sources of and sinks for greenhouse gases (GHG). This paper offers a survey of the existing literature assessing cost-effectiveness and efficiency of greenhouse gas mitigation strategies or the effects of broader economic reforms in the agricultural and forestry sectors. The focus is mainly on European countries. Different methodological approaches, research questions addressed and results are examined. The main findings are that agriculture can potentially provide emissions reduction at a competitive cost, mainly with methane abatement, while carbon sequestration seems more cost-effective with appropriate forest management measures. Afforestation, cropland management and bioenergy are less economically viable measures due to competition with other land use. Mitigation policies should be carefully designed either to balance costs with expected benefits in terms of social welfare. Regional variability is one of the main drawbacks to fully assess the cost-effectiveness of different measures. Integration of models to take into account both social welfare and spatial heterogeneity seems to be the frontier of the next model generation

50 CFR 218.4 - Mitigation.

Science.gov (United States)

2010-10-01

... species mitigation measures. (B) Commanding Officers shall make use of marine species detection cues and... entire target area shall take place with “Big Eyes” and the naked eye during the retrieval of the IMPASS...

Design review report for the SY-101 RAPID mitigation system

International Nuclear Information System (INIS)

SCHLOSSER, R.L.

1999-01-01

This report documents design reviews conducted of the SY-101 Respond And Pump In Days (RAPID) Mitigation System. As part of the SY-101 Surface-Level-Rise Remediation Project, the SY-101 WID Mitigation System will reduce the potential unacceptable consequences of crust growth in Tank 241-SY-101 (SY-101). Projections of the crust growth rate indicate that the waste level in the tank may reach the juncture of the primary and secondary confinement structures of the tank late in 1999. Because of this time constraint, many design activities are being conducted in parallel and design reviews were conducted for system adequacy as well as design implementation throughout the process. Design implementation, as used in this design review report, is the final component selection (e.g., which circuit breaker, valve, or thermocouple) that meets the approved design requirements, system design, and design and procurement specifications. Design implementation includes the necessary analysis, testing, verification, and qualification to demonstrate compliance with the system design and design requirements. Design implementation is outside the scope of this design review. The design activities performed prior to detailed design implementation (i.e., system mission requirements, functional design requirements, technical criteria, system conceptual design, and where design and build contracts were placed, the procurement specification) have been reviewed and are within the scope of this design review report. Detailed design implementation will be controlled, reviewed, and where appropriate, approved in accordance with Tank Waste Remediation System (TWRS) engineering procedures. Review of detailed design implementation will continue until all components necessary to perform the transfer function are installed and tested

Design review report for the SY-101 RAPID mitigation system

Energy Technology Data Exchange (ETDEWEB)

SCHLOSSER, R.L.

1999-05-24

This report documents design reviews conducted of the SY-101 Respond And Pump In Days (RAPID) Mitigation System. As part of the SY-101 Surface-Level-Rise Remediation Project, the SY-101 WID Mitigation System will reduce the potential unacceptable consequences of crust growth in Tank 241-SY-101 (SY-101). Projections of the crust growth rate indicate that the waste level in the tank may reach the juncture of the primary and secondary confinement structures of the tank late in 1999. Because of this time constraint, many design activities are being conducted in parallel and design reviews were conducted for system adequacy as well as design implementation throughout the process. Design implementation, as used in this design review report, is the final component selection (e.g., which circuit breaker, valve, or thermocouple) that meets the approved design requirements, system design, and design and procurement specifications. Design implementation includes the necessary analysis, testing, verification, and qualification to demonstrate compliance with the system design and design requirements. Design implementation is outside the scope of this design review. The design activities performed prior to detailed design implementation (i.e., system mission requirements, functional design requirements, technical criteria, system conceptual design, and where design and build contracts were placed, the procurement specification) have been reviewed and are within the scope of this design review report. Detailed design implementation will be controlled, reviewed, and where appropriate, approved in accordance with Tank Waste Remediation System (TWRS) engineering procedures. Review of detailed design implementation will continue until all components necessary to perform the transfer function are installed and tested.

Steam generator degradation: Current mitigation strategies for controlling corrosion

International Nuclear Information System (INIS)

Millett, P.

1997-01-01

Steam Generator degradation has caused substantial losses of power generation, resulted in large repair and maintenance costs, and contributed to significant personnel radiation exposures in Pressurized Water Reactors (PWRs) operating throughout the world. EPRI has just published the revised Steam Generator Reference Book, which reviews all of the major forms of SG degradation. This paper discusses the types of SG degradation that have been experienced with emphasis on the mitigation strategies that have been developed and implemented in the field. SG degradation is presented from a world wide perspective as all countries operating PWRs have been effected to one degree or another. The paper is written from a US. perspective where the utility industry is currently undergoing tremendous change as a result of deregulation of the electricity marketplace. Competitive pressures are causing utilities to strive to reduce Operations and Maintenance (O ampersand M) and capital costs. SG corrosion is a major contributor to the O ampersand M costs of PWR plants, and therefore US utilities are evaluating and implementing the most cost effective solutions to their corrosion problems. Mitigation strategies developed over the past few years reflect a trend towards plant specific solutions to SG corrosion problems. Since SG degradation is in most cases an economic problem and not a safety problem, utilities can focus their mitigation strategies on their unique financial situation. Accordingly, the focus of R ampersand D has shifted from the development of more expensive, prescriptive solutions (e.g. reduced impurity limits) to corrosion problems to providing the utilities with a number of cost effective mitigation options (e.g. molar ratio control, boric acid treatment)

Joint implementation: methodology and policy considerations

International Nuclear Information System (INIS)

Illum, Klaus; Meyer, N.I.

2004-01-01

The focus of the present paper is on joint implementation (JI) projects between countries in Western and Eastern Europe and especially on the problems of constructing credible references (baselines). A number of the present EU countries are anticipated to have severe problems in meeting their greenhouse gas reduction commitments and they have already announced that they shall take advantage of JI in this connection. As stated in the Kyoto Protocol, JI emission reductions must be real and measurable. However, in most cases the reductions obtained by a JI project do not occur at the project site but elsewhere in the energy system. Therefore, when a number of JI projects are implemented concurrently and other changes in the energy system take place over time, there is no way to measure the reductions obtained by individual projects. Because the emission reduction obtained is a property of the entire energy system, it cannot be estimated a priori on the basis of a project baseline alone. A baseline must refer to the national energy system of which the project is a part. It is argued in this paper that baselines should be derived from national energy systems databases and models, which serve to ensure that JI projects effectively contribute to the fulfillment of the Kyoto Protocol objectives. In addition, they should provide governments with comprehensive energy information systems needed to address long-term climate mitigation and energy demand and supply issues in a rational, least-cost manner. Compared to other climate mitigation costs and the costs of failure to meet the Kyoto commitments the costs involved in the preparation of the databases needed and the implementation of systems analysis and documentation programs will be small. If these costs are carried by national governments, the investors in JI projects will benefit from lower transaction costs

Development of a harmonized risk mitigation toolbox dedicated to environmental risks of pesticides in farmland in Europe: outcome of the MAgPIE workshop

Directory of Open Access Journals (Sweden)

Alix, A.

2015-11-01

Full Text Available Risk mitigation measures are a key component in designing conditions of use of pesticides in crop protection. A 2-step workshop was organized under the auspices of SETAC and the European Commission and gathered risk assessors and risk managers of 21 European countries, industry, academia and agronomical advisors/extension services, in order to provide European regulatory authorities with a toolbox of risk mitigation measures designed to reduce environmental risks of pesticides used in agriculture, and thus contribute to a better harmonization within Europe in the area. The workshop gathered an inventory of the risk mitigation tools for pesticides being implemented or in development in European countries. The inventory was discussed in order to identify the most promising tools for a harmonized toolbox in the European area. The discussions concerned the level of confidence in the technical data on which the tools identified rely, possible regulatory hurdles, expectations as regards the implementation of these tools by farmers and links with risk assessment. Finally, this workshop was a first step towards a network gathering all stakeholders, i.e. experts from national authorities, research sector, industry and farmers, to share information and further develop this toolbox. This paper presents an outline of the content of the toolbox with an emphasis on spray drift reducing techniques, in line with the discussions ongoing in the SPISE workshop.

Safeguard Measures for Implementation of New Round of Land Consolidation Planning

Institute of Scientific and Technical Information of China (English)

LI Chen; LIU Xin-feng; PENG Zhe; SI Tao

2012-01-01

We conduct a comprehensive analysis of the current situation of security system for implementation of China’s land consolidation planning. The prominent problems in the process of implementing safeguard measures for planning are summarized as follows: the guiding ideology for planning formulation is imperfect; the legal basis is weak, and administrative means are not sound; the economic security mechanism is not brought into full play, and the social security measures still need to be further deepened; the technical safeguard measures are short. From laws and regulations, administrative management, economic security, social supervision, technology management and other aspects, we establish the scientific security system for implementation of land consolidation planning; put forth the recommendations for guaranteeing the implementation of planning in China.

Integrating Climate Change Adaptation and Mitigation with Urban planning for a Livable city in Tehran

Directory of Open Access Journals (Sweden)

Mojtaba Rafieian

2015-09-01

Full Text Available Climate change impacts are seen within growing numbers of cities in low- and middle-income countries, so there is growing interest in the adaptation and mitigation plans and programs put forward by city authorities. This paper aims to provide a better understanding of the constraints which cities face them in this subject by analyzing the case of Tehran. City has a commitment to decentralization, transparency, accountability and participation. There are some new programs and plansin urban planning which has evolved to include a broad vision of urban challenges and responses, a commitment to environmental sustainability and a strategic plan that has involved multiple stakeholders. This paper describes the principles for integrating climate change adaptation and mitigation with urban planning which can be useful for urban authorities. Then it analysesthe many measures implemented in Tehran over the last years, which provide a solid foundation for more systematically addressing adaptation. It also describes the significant challenges faced by the city’s administration, especially around funding, data and the challenge of responding to pressing and competing interests.Tehran city is still struggling to complete greenhouse gas inventories andit has, however, implemented several specific mitigation measures and tries continuously to place this issue on the government’s agenda.However, Tehran’s particular way of responding to current development challenges has put in place the flexibility, creativity and commitment needed for adaptation, regardless of whether this is made explicit or not. The results of this study reveal thatTehran’s policies have had continuity and consistency, despite being frequently revised over years, because each administration has built upon the progress of its predecessor. This is quite unusual; it is more common for there to be a revision of all that has been accomplished and for the need to point out the negative

Air pollution prevention through urban heat island mitigation: An update on the urban heat island pilot project

Energy Technology Data Exchange (ETDEWEB)

Gorsevski, V.; Taha, H.; Quattrochi, D.; Luvall, J.

1998-07-01

Urban heat islands increase the demand for cooling energy and accelerate the formation of smog. They are created when natural vegetation is replaced by heat-absorbing surfaces such as building roofs and walls, parking lots, and streets. Through the implementation of measures designed to mitigate the urban heat island, communities can decrease their demand for energy and effectively cool the metropolitan landscape. In addition to the economic benefits, using less energy leads to reductions in emission of CO{sub 2}--a greenhouse gas--as well as ozone (smog) precursors such as NOx and VOCs. Because ozone is created when NOx and VOCs photochemically combine with heat and solar radiation, actions taken to lower ambient air temperature can significantly reduce ozone concentrations in certain areas. Measures to reverse the urban heat island include afforestation and the widespread use of highly reflective surfaces. To demonstrate the potential benefits of implementing these measures, EPA has teamed up with NASA and LBNL to initiate a pilot project with three US cities. As part of the pilot, NASA will use remotely-sensed data to quantify surface temperature, albedo, the thermal response number and NDVI vegetation of each city. This information will be used by scientists at Lawrence Berkeley National Laboratory (LBNL) along with other data as inputs to model various scenarios that will help quantify the potential benefits of urban heat island mitigation measures in terms of reduced energy use and pollution. This paper will briefly describe this pilot project and provide an update on the progress to date.

Economic efficiency assessment of greenhouse gases mitigation for agriculture; Analyse af omkostningseffektiviteten ved drivhusgasreducerende tiltag i relation til landbruget

Energy Technology Data Exchange (ETDEWEB)

Dubgaard, A.; Moeller Laugesen, F.; Staehl, E.E.; Bang, J.R.; Schou, E.; Jacobsen, Brian H.; Oerum, J.E.; Dejgaerd Jensen, J.

2013-08-15

The report contains the contributions by the Institute of Food and Resource Economics (IFRO) to a Danish Government appraisal of greenhouse gas (GHG) reduction measures. The policy goal is a 40 per cent reduction in total Danish GHG emissions by 2020 compared to 1990. The GHGs analysed in the present study include emissions of CO{sub 2}, nitrous oxide and methane plus soil carbon sequestration. The purpose of the study is to identify GHG mitigation measures related to agriculture which can deliver cost-effective contributions to the targeted reduction in GHG emissions in Denmark. A total of 21 GHG mitigation measures are included in the assessment. The stipulated implementation period is 2013 to 2020. The cost calculations have a time horizon equal to 30 years, i.e. from 2013 to 2042. The GHG reduction potential, expressed in CO{sub 2} equivalents (CO{sub 2}-eq), is calculated as the sum of the effect on the emission of CO{sub 2} (with and without changes in soil carbon), methane and nitrous oxide. The 21 mitigation measures are listed below (figures in brackets show the assumed implementation potential): 1. Biogas from livestock manure/slurry (10 % of total slurry production) 2. Biogas from slurry and maize (10 % of total slurry production) 3. Biogas from organic clover 4. Additional fat in diet for dairy cows (80% of conventional dairy cow stock and 20 % of organic dairy cow stock) 5. Additional concentrated feed in diet for other cattle (25 % of cattle stock under 2 years of age) 6. Prolonged lactation period for dairy cows (10 % of dairy cow stock) 7. Acidification of slurry (10 % of total slurry production) 8. Covers on slurry containers (40 % of total slurry production) 9. Cooling of pig slurry (10 % of pig slurry) 10. Nitrification inhibitors in nitrate fertilisers (100 % of chemical fertilisers with nitrogen) 11. Increased nitrogen utilization requirement for degassed slurry in nitrogen quota system (50 % of total slurry production) 12. Increased nitrogen

Technology learning for renewable energy. Implications for South Africa's long-term mitigation scenarios

Energy Technology Data Exchange (ETDEWEB)

Winkler, Harald; Hughes, Alison [Energy Research Centre, University of Cape Town, Private Bag, Rondebosch 7701 (South Africa); Haw, Mary [PJ Carew Consulting, 103 Hout Street, Cape Town 8001 (South Africa)

2009-11-15

Technology learning can make a significant difference to renewable energy as a mitigation option in South Africa's electricity sector. This article considers scenarios implemented in a Markal energy model used for mitigation analysis. It outlines the empirical evidence that unit costs of renewable energy technologies decline, considers the theoretical background and how this can be implemented in modeling. Two scenarios are modelled, assuming 27% and 50% of renewable electricity by 2050, respectively. The results show a dramatic shift in the mitigation costs. In the less ambitious scenario, instead of imposing a cost of Rand 52/t CO{sub 2}-eq (at 10% discount rate), reduced costs due to technology learning turn renewables into negative cost option. Our results show that technology learning flips the costs, saving R143. At higher penetration rate, the incremental costs added beyond the base case decline from R92 per ton to R3. Including assumptions about technology learning turns renewable from a higher-cost mitigation option to one close to zero. We conclude that a future world in which global investment in renewables drives down unit costs makes it a much more cost-effective and sustainable mitigation option in South Africa. (author)

Understanding the concept of nationally appropriate mitigation action

Energy Technology Data Exchange (ETDEWEB)

Sharma, S.; Desgain, D.

2013-05-15

This publication is intended to enable national policy makers and other stakeholders, such as the private sector and technical experts, to acquaint themselves with the concept of NAMA. It aims to provide a comprehensive overview of the Nationally Appropriate Mitigation Action (NAMA) concept and enhance the understanding of NAMAs by explaining the underlying decisions of the Conference of the Parties in layman's terms. The first chapter describes how the concept of NAMA emerged in the context of the negotiations on climate change. The chapter gives an overview of how the concepts of NAMA and related MRV and financing issues have evolved through the different COPs. The second chapter clarifies the understanding of NAMAs in the context of the global temperature goal, and moves on to discuss the legal nature and scope of NAMAs. The chapter subsequently analyses the diversity of NAMAs submitted by developing countries to the UNFCCC, and ends by proposing a structure for formal submission of a NAMA. The third chapter specifically addresses the concept of measurement, reporting and verification (MRV), and describes the implications for countries implementing the MRV requirements. The last chapter discusses institutional arrangements, under the Convention, for providing financing to develop and implement NAMAs. The chapter also briefly discusses the different financial sources for implementing NAMAs, and concludes by explaining the concept of incremental cost in this specific context. (Author)

Measuring lean implementation for maintenance service companies

NARCIS (Netherlands)

de Jong, Stephan J.; Beelaerts van Blokland, W.W.A.

2016-01-01

Purpose – Implementation of lean manufacturing is currently performed in the production industry; however, for the airline maintenance service industry, it is still in its infancy. Indicators such as work in process, cycle time, on-time performance and inventory are useful indicators to measure

Greenhouse gas mitigation options for Washington State

Energy Technology Data Exchange (ETDEWEB)

Garcia, N.

1996-04-01

President Clinton, in 1993, established a goal for the United States to return emissions of greenhouse gases to 1990 levels by the year 2000. One effort established to help meet this goal was a three part Environmental Protection Agency state grant program. Washington State completed part one of this program with the release of the 1990 greenhouse gas emissions inventory and 2010 projected inventory. This document completes part two by detailing alternative greenhouse gas mitigation options. In part three of the program EPA, working in partnership with the States, may help fund innovative greenhouse gas reduction strategies. The greenhouse gas control options analyzed in this report have a wide range of greenhouse gas reductions, costs, and implementation requirements. In order to select and implement a prudent mix of control strategies, policy makers need to have some notion of the potential change in climate, the consequences of that change and the uncertainties contained therein. By understanding the risks of climate change, policy makers can better balance the use of scarce public resources for concerns that are immediate and present against those that affect future generations. Therefore, prior to analyzing alternative greenhouse gas control measures, this report briefly describes the phenomenon and uncertainties of global climate change, and then projects the likely consequences for Washington state.

Land-use protection for climate change mitigation

Science.gov (United States)

Popp, Alexander; Humpenöder, Florian; Weindl, Isabelle; Bodirsky, Benjamin Leon; Bonsch, Markus; Lotze-Campen, Hermann; Müller, Christoph; Biewald, Anne; Rolinski, Susanne; Stevanovic, Miodrag; Dietrich, Jan Philipp

2014-12-01

Land-use change, mainly the conversion of tropical forests to agricultural land, is a massive source of carbon emissions and contributes substantially to global warming. Therefore, mechanisms that aim to reduce carbon emissions from deforestation are widely discussed. A central challenge is the avoidance of international carbon leakage if forest conservation is not implemented globally. Here, we show that forest conservation schemes, even if implemented globally, could lead to another type of carbon leakage by driving cropland expansion in non-forested areas that are not subject to forest conservation schemes (non-forest leakage). These areas have a smaller, but still considerable potential to store carbon. We show that a global forest policy could reduce carbon emissions by 77 Gt CO2, but would still allow for decreases in carbon stocks of non-forest land by 96 Gt CO2 until 2100 due to non-forest leakage effects. Furthermore, abandonment of agricultural land and associated carbon uptake through vegetation regrowth is hampered. Effective mitigation measures thus require financing structures and conservation investments that cover the full range of carbon-rich ecosystems. However, our analysis indicates that greater agricultural productivity increases would be needed to compensate for such restrictions on agricultural expansion.

Climate change mitigation in Asia and financing Mechanisms

Energy Technology Data Exchange (ETDEWEB)

Shukla, P.R.; Deo, P. [eds.

1998-12-01

The three primary objectives of the conference, which was organized by the UNEP Collaborating Centre on Energy and Environment (UCCEE) in conjunction with the Environment Department of the World Bank, at Goa in India from May 4 to 6, 1998, were: 1) to share the GHG mitigation experiences from Asian developing countries; 2) to disseminate the standard methodological approach for mitigation analysis developed by UNEP and its applications in different countries; and 3) assess the role and efficacy of financial mechanisms and to, specifically, seek feedback on the Prototype Carbon Fund proposed by the World Bank. Follwing these objectives, the workshop presentations and discussions were structured in three parts. In the first part, participants from eleven Asian developing countries made presentations that were followed by discussions. The second part included the presentations by the experts from UCCEE, UNFCCC and other invited experts who presented the mitigation methodology and the issues and experiences relating to various co-operative implementation mechanisms. The third part included the presentations by the World Bank representatives on the Prototype Carbon Fund and the discussions on financial mechanisms. (EG)

FEMA Hazard Mitigation Assistance Flood Mitigation Assistance (FMA) Data

Data.gov (United States)

Department of Homeland Security — This dataset contains closed and obligated projects funded under the following Hazard Mitigation Assistance (HMA) grant programs: Flood Mitigation Assistance (FMA)....

External Innovation Implementation Determinants and Performance Measurement

DEFF Research Database (Denmark)

Coates, Matthew; Bals, Lydia

2013-01-01

for innovation implementation based on a case study in the pharmaceutical industry. The results of 25 expert interviews and a survey with 67 respondents led to the resulting framework and a corresponding performance measurement system. The results reveal the importance of supporting systems and show differences...

Review of Offshore Wind Farm Impact Monitoring and Mitigation with Regard to Marine Mammals.

Science.gov (United States)

Verfuss, Ursula K; Sparling, Carol E; Arnot, Charlie; Judd, Adrian; Coyle, Michael

2016-01-01

Monitoring and mitigation reports from 19 UK and 9 other European Union (EU) offshore wind farm (OWF) developments were reviewed, providing a synthesis of the evidence associated with the observed environmental impact on marine mammals. UK licensing conditions were largely concerned with mitigation measures reducing the risk of physical and auditory injury from pile driving. At the other EU sites, impact monitoring was conducted along with mitigation measures. Noise-mitigation measures were developed and tested in UK and German waters in German government-financed projects. We highlight some of the review's findings and lessons learned with regard to noise impact on marine mammals.

Making Grasslands Sustainable in Mongolia: Assessment of Key Elements in Nationally Appropriate Mitigation Actions for Grassland and Livestock Management

OpenAIRE

Asian Development Bank (ADB)

2014-01-01

Climate change is a threat to Mongolia’s economic growth, sustainable development, and fragile environment. Well-designed actions to mitigate climate change can provide multiple benefits, including socioeconomic development and resilience to climate variability and change. Nationally appropriate mitigation actions (NAMAs) can provide a framework for the identification and implementation of mitigation actions. This publication identifies and assesses technical, institutional, and policy elemen...

The effectiveness of the mitigation hierarchy in environmental impact studies on marine ecosystems: A case study in France

International Nuclear Information System (INIS)

Jacob, Céline; Pioch, Sylvain; Thorin, Sébastien

2016-01-01

While the development of maritime economic activity is increasingly encouraged, the consideration of its impacts constitutes a real challenge. The limitations of the implementation of the mitigation hierarchy have been widely discussed in scientific literature, yet data on marine biodiversity offset practices remains scarce. In this study, we investigated the use of Environmental Impact Assessments (EIAs) as suitable instruments to achieve the No Net Loss objective. Drawing on a French approach developed for the initial assessment of the European Marine Strategy Framework Directive, we examined the pressures and impacts related to various marine development projects and the effectiveness of the mitigation hierarchy in limiting these. An analysis of 55 recent French environmental impact studies showed that only 7% of the proposed measures had the aim of offsetting predicted degradation of sites of remarkable biodiversity. This can be partly explained by the lack of a clear definition of ‘significant impact’, which varies greatly depending on what is impacted, in turn allowing socio-economic activities to benefit more easily from offset. Furthermore, offsetting does not always constitute the final step of the mitigation hierarchy, highlighting the need to reinforce avoidance and reduction steps. Although we acknowledge the role of EIA in mitigating the negative impacts of development projects, synergies with other European marine environmental policies such as the Marine Strategy Framework Directive (MSFD) and the Maritime Spatial Planning directive (MSP) should be developed in order to improve current practices. - Highlights: • Avoidance measures were not well represented in the Environmental Impact Assessments studied. • Few significant residual impacts and measures to offset these were described. • Common biodiversity did not benefit from offset measures. • The equivalency of proposed marine offsets is questionable.

The effectiveness of the mitigation hierarchy in environmental impact studies on marine ecosystems: A case study in France

Energy Technology Data Exchange (ETDEWEB)

Jacob, Céline, E-mail: celine.jacob@cefe.cnrs.fr [CEFE UMR 5175, CNRS - Université de Montpellier - Université Paul-Valéry Montpellier - EPHE - Université Paul-Valéry Montpellier, Route de Mende 34 199 Montpellier Cedex 5 (France); CREOCEAN, Les Belvédères, Bâtiment B, 128, Avenue de Fès, 34080 Montpellier (France); Pioch, Sylvain, E-mail: sylvain.pioch@gmail.com [CEFE UMR 5175, CNRS - Université de Montpellier - Université Paul-Valéry Montpellier - EPHE - Université Paul-Valéry Montpellier, Route de Mende 34 199 Montpellier Cedex 5 (France); Thorin, Sébastien, E-mail: thorin@creocean.fr [CREOCEAN, Les Belvédères, Bâtiment B, 128, Avenue de Fès, 34080 Montpellier (France)

2016-09-15

While the development of maritime economic activity is increasingly encouraged, the consideration of its impacts constitutes a real challenge. The limitations of the implementation of the mitigation hierarchy have been widely discussed in scientific literature, yet data on marine biodiversity offset practices remains scarce. In this study, we investigated the use of Environmental Impact Assessments (EIAs) as suitable instruments to achieve the No Net Loss objective. Drawing on a French approach developed for the initial assessment of the European Marine Strategy Framework Directive, we examined the pressures and impacts related to various marine development projects and the effectiveness of the mitigation hierarchy in limiting these. An analysis of 55 recent French environmental impact studies showed that only 7% of the proposed measures had the aim of offsetting predicted degradation of sites of remarkable biodiversity. This can be partly explained by the lack of a clear definition of ‘significant impact’, which varies greatly depending on what is impacted, in turn allowing socio-economic activities to benefit more easily from offset. Furthermore, offsetting does not always constitute the final step of the mitigation hierarchy, highlighting the need to reinforce avoidance and reduction steps. Although we acknowledge the role of EIA in mitigating the negative impacts of development projects, synergies with other European marine environmental policies such as the Marine Strategy Framework Directive (MSFD) and the Maritime Spatial Planning directive (MSP) should be developed in order to improve current practices. - Highlights: • Avoidance measures were not well represented in the Environmental Impact Assessments studied. • Few significant residual impacts and measures to offset these were described. • Common biodiversity did not benefit from offset measures. • The equivalency of proposed marine offsets is questionable.

Albeni Falls Wildlife Mitigation Project; Idaho Department of Fish and Game 2007 Final Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Cousins, Katherine [Idaho Department of Fsh and Game

2009-04-03

The Idaho Department of Fish and Game maintained a total of about 2,743 acres of wildlife mitigation habitat in 2007, and protected another 921 acres. The total wildlife habitat mitigation debt has been reduced by approximately two percent (598.22 HU) through the Department's mitigation activities in 2007. Implementation of the vegetative monitoring and evaluation program continued across protected lands. For the next funding cycle, the IDFG is considering a package of restoration projects and habitat improvements, conservation easements, and land acquisitions in the project area.

Wildlife Protection, Mitigation and Enhancement Planning for Grand Coulee Dam, Final Report.

Energy Technology Data Exchange (ETDEWEB)

Creveling, Jennifer

1986-08-01

The development and operation of Grand Coulee Dam inundated approximately 70,000 acres of wildlife habitat under the jurisdictions of the Colville Confederated Tribes, the Spokane Tribe, and the State of Washington. Under the provisions of the Pacific Northwest Electric Power Planning and Conservation Act of 1980, this study reviews losses to wildlife and habitat, and proposes mitigation for those losses. Wildlife loss estimates were developed from information available in the literature. Habitat losses and potential habitat gains through mitigation were estimated by a modified Habitat Evaluation Procedure. The mitigation plan proposes (1) acquisition of sufficient land or management rights to land to protect Habitat Units equivalent to those lost (approximately 73,000 acres of land would be required), (2) improvement and management of those lands to obtain and perpetuate target Habitat Units, and (3) protection and enhancement of suitable habitat for bald eagles. Mitigation is presented as four actions to be implemented over a 10-year period. A monitoring program is proposed to monitor mitigation success in terms of Habitat Units and wildlife population trends.

Radon diagnostics and mitigation in two public schools in Nashville, Tennessee

International Nuclear Information System (INIS)

Craig, A.B.; Leovic, K.W.; Harris, D.B.

1990-01-01

This paper reports on diagnostic measurements and mitigation studies that were carried out in two schools in Nashville, Tennessee, as part of the Environmental Protection Agency's (EPAs) School Radon Mitigation Development/Demonstration Program. Diagnostic studies included architectural plans and building examination, sub-slab radon concentrations, sub-slab communications measurements, and detailed classroom radon measurements using 2-day charcoal canisters, electret ion chambers, and continuous monitors. Although sub-slab communications varied significantly between the two schools, both were amenable to mitigation using sub-slab suction. Average premitigation levels of 39.5 and 29.7 picocuries per liter (pCi/L) were reduced to 0.78 and 1.7 pCi/L in the two schools

Analysis of motorcycle fleet in Hanoi for estimation of air pollution emission and climate mitigation co-benefit of technology implementation

Science.gov (United States)

Kim Oanh, Nguyen Thi; Thuy Phuong, Mai Thi; Permadi, Didin Agustian

2012-11-01

A fleet of over two million motorcycles (MC) in Hanoi is believed to contribute a substantial emission of air pollutants and climate forcers but has not been thoroughly characterized. This study conducted a survey of the MC technologies and activities in Hanoi using questionnaires, GPS monitoring, and video camera in 2008. The data were collected for three typical road types (highways, arterials, residential streets) in 3 zones of the city. Majority of MC in Hanoi were relatively new (3.6 years), had 4-stroke engine, but only 6% was equipped with catalyst exhaust control devices. About 35% of the fleet did not comply with any EURO standards. The MC daily driving was 20 km, mostly done on arterial streets. The main driving features in Hanoi arterials and residential streets were of low speeds with frequent starts/stops and idling. International Vehicle Emissions (IVE) model produced adjusted emission factors (EFs) that were compared with the limited available measurement data. The fleet emission was estimated for 2008 as a base case and for two “what-if” faster technology implementation scenarios: scenario 1 assumed that the entire fleet in 2008 conformed at least EURO2 and scenario 2 assumed 100% MC met the EURO3 standard. Total emissions from the fleet in 2008 of CO, VOC, NOx, SO2, PM10, and CH4 were 158, 51.5, 9.5, 0.17, 2.4 and 9.5 kt, respectively. Emissions of 1,3-butadiene, acetaldehydes, formaldehydes and benzene were 0.26, 1.2, 4.9 and 2.1 kt, respectively. Faster EURO3 technology intrusion in scenario 2 would significantly reduce the emission of pollutants (by 53-94%) and climate forcers in CO2-equivalent (53% for 20-year and 38% for 100-year horizon), which tripled the reductions obtained under scenario 1. Substantial co-benefits for air quality and climate forcer mitigation could be achieved by the faster technology implementation.

Cross-Correlation-Function-Based Multipath Mitigation Method for Sine-BOC Signals

Directory of Open Access Journals (Sweden)

H. H. Chen

2012-06-01

Full Text Available Global Navigation Satellite Systems (GNSS positioning accuracy indoor and urban canyons environments are greatly affected by multipath due to distortions in its autocorrelation function. In this paper, a cross-correlation function between the received sine phased Binary Offset Carrier (sine-BOC modulation signal and the local signal is studied firstly, and a new multipath mitigation method based on cross-correlation function for sine-BOC signal is proposed. This method is implemented to create a cross-correlation function by designing the modulated symbols of the local signal. The theoretical analysis and simulation results indicate that the proposed method exhibits better multipath mitigation performance compared with the traditional Double Delta Correlator (DDC techniques, especially the medium/long delay multipath signals, and it is also convenient and flexible to implement by using only one correlator, which is the case of low-cost mass-market receivers.

Review of Leading Approaches for Mitigating Hypersonic Vehicle Communications Blackout and a Method of Ceramic Particulate Injection Via Cathode Spot Arcs for Blackout Mitigation

Science.gov (United States)

Gillman, Eric D.; Foster, John E.; Blankson, Isaiah M.

2010-01-01

Vehicles flying at hypersonic velocities within the atmosphere become enveloped in a "plasma sheath" that prevents radio communication, telemetry, and most importantly, GPS signal reception for navigation. This radio "blackout" period has been a problem since the dawn of the manned space program and was an especially significant hindrance during the days of the Apollo missions. An appropriate mitigation method must allow for spacecraft to ground control and ground control to spacecraft communications through the reentry plasma sheath. Many mitigation techniques have been proposed, including but not limited to, aerodynamic shaping, magnetic windows, and liquid injection. The research performed on these mitigation techniques over the years will be reviewed and summarized, along with the advantages and obstacles that each technique will need to overcome to be practically implemented. A unique approach for mitigating the blackout communications problem is presented herein along with research results associated with this method. The novel method involves the injection of ceramic metal-oxide particulate into a simulated reentry plasma to quench the reentry plasma. Injection of the solid ceramic particulates is achieved by entrainment within induced, energetic cathode spot flows.

Dynamics and climate change mitigation potential of soil organic carbon sequestration.

Science.gov (United States)

Sommer, Rolf; Bossio, Deborah

2014-11-01

When assessing soil organic carbon (SOC) sequestration and its climate change (CC) mitigation potential at global scale, the dynamic nature of soil carbon storage and interventions to foster it should be taken into account. Firstly, adoption of SOC-sequestration measures will take time, and reasonably such schemes could only be implemented gradually at large-scale. Secondly, if soils are managed as carbon sinks, then SOC will increase only over a limited time, up to the point when a new SOC equilibrium is reached. This paper combines these two processes and predicts potential SOC sequestration dynamics in agricultural land at global scale and the corresponding CC mitigation potential. Assuming that global governments would agree on a worldwide effort to gradually change land use practices towards turning agricultural soils into carbon sinks starting 2014, the projected 87-year (2014-2100) global SOC sequestration potential of agricultural land ranged between 31 and 64 Gt. This is equal to 1.9-3.9% of the SRES-A2 projected 87-year anthropogenic emissions. SOC sequestration would peak 2032-33, at that time reaching 4.3-8.9% of the projected annual SRES-A2 emission. About 30 years later the sequestration rate would have reduced by half. Thus, SOC sequestration is not a C wedge that could contribute increasingly to mitigating CC. Rather, the mitigation potential is limited, contributing very little to solving the climate problem of the coming decades. However, we deliberately did not elaborate on the importance of maintaining or increasing SOC for sustaining soil health, agro-ecosystem functioning and productivity; an issue of global significance that deserves proper consideration irrespectively of any potential additional sequestration of SOC. Copyright © 2014 Elsevier Ltd. All rights reserved.

Analysis of Multipath Mitigation Techniques with Land Mobile Satellite Channel Model

Directory of Open Access Journals (Sweden)

M. Z. H. Bhuiyan J. Zhang

2012-12-01

is of utmost importance to analyze the performance of different multipath mitigation techniques in some realistic measurement-based channel models, for example, the Land Mobile Satellite (LMS channel model [1]-[4], developed at the German Aerospace Center (DLR. The DLR LMS channel model is widely used for simulating the positioning accuracy of mobile satellite navigation receivers in urban outdoor scenarios. The main objective of this paper is to present a comprehensive analysis of some of the most promising techniques with the DLR LMS channel model in varying multipath scenarios. Four multipath mitigation techniques are chosen herein for performance comparison, namely, the narrow Early-Minus-Late (nEML, the High Resolution Correlator, the C/N0-based two stage delay tracking technique, and the Reduced Search Space Maximum Likelihood (RSSML delay estimator. The first two techniques are the most popular and traditional ones used in nowadays GNSS receivers, whereas the later two techniques are comparatively new and are advanced techniques, recently proposed by the authors. In addition, the implementation of the RSSML is optimized here for a narrow-bandwidth receiver configuration in the sense that it now requires a significantly less number of correlators and memory than its original implementation. The simulation results show that the reduced-complexity RSSML achieves the best multipath mitigation performance in moderate-to-good carrier-to-noise density ratio with the DLR LMS channel model in varying multipath scenarios.

Annual Status Report on Nationally Appropriate Mitigation Actions (NAMAs) 2013

Energy Technology Data Exchange (ETDEWEB)

Haensel, G.; Roeser, F.; Hoehne, N. [Ecofys, Utrecht (Netherlands); Van Tilburg, X.; Cameron, L. [ECN Policy Studies, Amsterdam (Netherlands)] (eds.)

2013-11-15

results of an online survey that collected respondents' considerations taken when designing and implementing NAMAs and elements perceived as key in operationalising a NAMA registry. UNEP Risoe Centre reflects on the linkages between lowcarbon development strategies, nationally appropriate mitigation actions and measuring, reporting and verification processes. The Overseas Environmental Cooperation Center (OECC) reflects on domestic institutional arrangement instead as essential elements in the development, coordination and implementation of NAMAs and their MRV. The contribution of the World Resources Institute (WRI) seeks to unpack MRV needs for estimating the greenhouse gas emissions reductions associated with NAMAs, as well as existing resources available to assist countries. The NAMA Facility presents an overview of its objectives, governance structure and selection and implementation procedures for NAMA support projects.

Risk Mitigation Measures: An Important Aspect of the Environmental Risk Assessment of Pharmaceuticals

Directory of Open Access Journals (Sweden)

Markus Liebig

2014-01-01

Full Text Available Within EU marketing authorization procedures of human and veterinary medicinal products (HMP and VMP, an environmental risk assessment (ERA has to be performed. In the event that an unacceptable environmental risk is identified, risk mitigation measures (RMM shall be applied in order to reduce environmental exposure to the pharmaceutical. Within the authorization procedures of HMP, no RMM have been applied so far, except for specific precautions for the disposal of the unused medicinal product or waste materials. For VMP, a limited number of RMM do exist. The aim of this study was to develop consistent and efficient RMM. Therefore, existing RMM were compiled from a summary of product characteristics of authorized pharmaceuticals, and new RMM were developed and evaluated. Based on the results, appropriate RMM were applied within the authorization procedures of medicinal products. For HMP, except for the existing precautions for disposal, no further reasonable measures could be developed. For VMP, two specific precautions for disposal and 17 specific precautions for use in animals were proposed as RMM.

Fidelity of implementation: development and testing of a measure

Directory of Open Access Journals (Sweden)

Wiitala Wyndy

2010-12-01

Full Text Available Abstract Background Along with the increasing prevalence of chronic illness has been an increase in interventions, such as nurse case management programs, to improve outcomes for patients with chronic illness. Evidence supports the effectiveness of such interventions in reducing patient morbidity, mortality, and resource utilization, but other studies have produced equivocal results. Often, little is known about how implementation of an intervention actually occurs in clinical practice. While studies often assume that interventions are used in clinical practice exactly as originally designed, this may not be the case. Thus, fidelity of an intervention's implementation reflects how an intervention is, or is not, used in clinical practice and is an important factor in understanding intervention effectiveness and in replicating the intervention in dissemination efforts. The purpose of this paper is to contribute to the understanding of implementation science by (a proposing a methodology for measuring fidelity of implementation (FOI and (b testing the measure by examining the association between FOI and intervention effectiveness. Methods We define and measure FOI based on organizational members' level of commitment to using the distinct components that make up an intervention as they were designed. Semistructured interviews were conducted among 18 organizational members in four medical centers, and the interviews were analyzed qualitatively to assess three dimensions of commitment to use--satisfaction, consistency, and quality--and to develop an overall rating of FOI. Mixed methods were used to explore the association between FOI and intervention effectiveness (inpatient resource utilization and mortality. Results Predictive validity of the FOI measure was supported based on the statistical significance of FOI as a predictor of intervention effectiveness. The strongest relationship between FOI and intervention effectiveness was found when an

Fidelity of implementation: development and testing of a measure.

Science.gov (United States)

Keith, Rosalind E; Hopp, Faith P; Subramanian, Usha; Wiitala, Wyndy; Lowery, Julie C

2010-12-30

Along with the increasing prevalence of chronic illness has been an increase in interventions, such as nurse case management programs, to improve outcomes for patients with chronic illness. Evidence supports the effectiveness of such interventions in reducing patient morbidity, mortality, and resource utilization, but other studies have produced equivocal results. Often, little is known about how implementation of an intervention actually occurs in clinical practice. While studies often assume that interventions are used in clinical practice exactly as originally designed, this may not be the case. Thus, fidelity of an intervention's implementation reflects how an intervention is, or is not, used in clinical practice and is an important factor in understanding intervention effectiveness and in replicating the intervention in dissemination efforts. The purpose of this paper is to contribute to the understanding of implementation science by (a) proposing a methodology for measuring fidelity of implementation (FOI) and (b) testing the measure by examining the association between FOI and intervention effectiveness. We define and measure FOI based on organizational members' level of commitment to using the distinct components that make up an intervention as they were designed. Semistructured interviews were conducted among 18 organizational members in four medical centers, and the interviews were analyzed qualitatively to assess three dimensions of commitment to use--satisfaction, consistency, and quality--and to develop an overall rating of FOI. Mixed methods were used to explore the association between FOI and intervention effectiveness (inpatient resource utilization and mortality). Predictive validity of the FOI measure was supported based on the statistical significance of FOI as a predictor of intervention effectiveness. The strongest relationship between FOI and intervention effectiveness was found when an alternative measure of FOI was utilized based on

The next generation of urban MACCs. Reassessing the cost-effectiveness of urban mitigation options by integrating a systemic approach and social costs

International Nuclear Information System (INIS)

Saujot, Mathieu; Lefèvre, Benoit

2016-01-01

Many cities are implementing policies and climate action plans. Yet local climate policies suffer from a lack of scientific understanding and evaluation methods able to support the definition of efficient mitigation strategies. The purpose of this paper is to build on classical approaches in the energy policy field that exist at the national and international level to propose an urban MACCs methodology able to fulfill this lack and inform local debates. The methodology is an extension of static “expert-based” MACCs; it combines a land use transport integrated model and an abatement cost methodology that integrates co-benefits, and takes into account the spatial and systemic dimensions of cities. The methodology is implemented for the transportation sector of a mid-sized European city (Grenoble, France). Our results present the cost-effectiveness and political feasibility of several proposed measures. We find that the inclusion of co-benefits can profoundly change the cost-benefit assessment of transport mitigation options. Moreover we underline the key parameters determining the cost-effectiveness ranking of mitigation options. These urban MACCs aim to serve as a bridge between urban planning and mitigation policies and can thus contribute to strengthen and align sustainable and climate change agendas at the local level. - Highlights: •Local climate policies lack scientific understanding for prioritizing mitigation actions. •We develop a method to evaluate cost-effectiveness of urban transportation actions. •This method combines urban modeling and MACCs to inform urban planning. •Abatement costs from its application to a mid-sized city are presented. •The impact of the inclusion of co-benefits is analyzed.

Ensemble stacking mitigates biases in inference of synaptic connectivity

Directory of Open Access Journals (Sweden)

Brendan Chambers

2018-03-01

Full Text Available A promising alternative to directly measuring the anatomical connections in a neuronal population is inferring the connections from the activity. We employ simulated spiking neuronal networks to compare and contrast commonly used inference methods that identify likely excitatory synaptic connections using statistical regularities in spike timing. We find that simple adjustments to standard algorithms improve inference accuracy: A signing procedure improves the power of unsigned mutual-information-based approaches and a correction that accounts for differences in mean and variance of background timing relationships, such as those expected to be induced by heterogeneous firing rates, increases the sensitivity of frequency-based methods. We also find that different inference methods reveal distinct subsets of the synaptic network and each method exhibits different biases in the accurate detection of reciprocity and local clustering. To correct for errors and biases specific to single inference algorithms, we combine methods into an ensemble. Ensemble predictions, generated as a linear combination of multiple inference algorithms, are more sensitive than the best individual measures alone, and are more faithful to ground-truth statistics of connectivity, mitigating biases specific to single inference methods. These weightings generalize across simulated datasets, emphasizing the potential for the broad utility of ensemble-based approaches. Mapping the routing of spikes through local circuitry is crucial for understanding neocortical computation. Under appropriate experimental conditions, these maps can be used to infer likely patterns of synaptic recruitment, linking activity to underlying anatomical connections. Such inferences help to reveal the synaptic implementation of population dynamics and computation. We compare a number of standard functional measures to infer underlying connectivity. We find that regularization impacts measures

Minimising mortality in endangered raptors due to power lines: the importance of spatial aggregation to optimize the application of mitigation measures.

Directory of Open Access Journals (Sweden)

Francisco Guil

Full Text Available Electrocution by power lines is one of the main causes of non-natural mortality in birds of prey. In an area in central Spain, we surveyed 6304 pylons from 333 power lines to determine electrocution rates, environmental and design factors that may influence electrocution and the efficacy of mitigation measures used to minimise electrocution cases. A total of 952 electrocuted raptors, representing 14 different species, were observed. Electrocuted raptors were concentrated in certain areas and the environmental factors associated with increased electrocution events were: greater numbers of prey animals; greater vegetation cover; and shorter distance to roads. The structural elements associated with electrocutions were shorter strings of insulators, one or more phases over the crossarm, cross-shaped design and pylon function. Of the 952 carcasses found, 148 were eagles, including golden eagle (Aquila chrysaetos, Spanish imperial eagle (Aquila adalberti and Bonelli's eagle (Aquila fasciata. Electrocuted eagles were clustered in smaller areas than other electrocuted raptors. The factors associated with increased eagle electrocution events were: pylons function, shorter strings of insulators, higher slopes surrounding the pylon, and more numerous potential prey animals. Pylons with increased string of insulators had lower raptor electrocution rates than unimproved pylons, although this technique was unsuccessful for eagles. Pylons with cable insulation showed higher electrocution rates than unimproved pylons, both for raptors and eagles, despite this is the most widely used and recommended mitigation measure in several countries. To optimize the application of mitigation measures, our results recommend the substitution of pin-type insulators to suspended ones and elongating the strings of insulators.

Minimising mortality in endangered raptors due to power lines: the importance of spatial aggregation to optimize the application of mitigation measures.

Science.gov (United States)

Guil, Francisco; Fernández-Olalla, Mariana; Moreno-Opo, Rubén; Mosqueda, Ignacio; Gómez, María Elena; Aranda, Antonio; Arredondo, Angel; Guzmán, José; Oria, Javier; González, Luis Mariano; Margalida, Antoni

2011-01-01

Electrocution by power lines is one of the main causes of non-natural mortality in birds of prey. In an area in central Spain, we surveyed 6304 pylons from 333 power lines to determine electrocution rates, environmental and design factors that may influence electrocution and the efficacy of mitigation measures used to minimise electrocution cases. A total of 952 electrocuted raptors, representing 14 different species, were observed. Electrocuted raptors were concentrated in certain areas and the environmental factors associated with increased electrocution events were: greater numbers of prey animals; greater vegetation cover; and shorter distance to roads. The structural elements associated with electrocutions were shorter strings of insulators, one or more phases over the crossarm, cross-shaped design and pylon function. Of the 952 carcasses found, 148 were eagles, including golden eagle (Aquila chrysaetos), Spanish imperial eagle (Aquila adalberti) and Bonelli's eagle (Aquila fasciata). Electrocuted eagles were clustered in smaller areas than other electrocuted raptors. The factors associated with increased eagle electrocution events were: pylons function, shorter strings of insulators, higher slopes surrounding the pylon, and more numerous potential prey animals. Pylons with increased string of insulators had lower raptor electrocution rates than unimproved pylons, although this technique was unsuccessful for eagles. Pylons with cable insulation showed higher electrocution rates than unimproved pylons, both for raptors and eagles, despite this is the most widely used and recommended mitigation measure in several countries. To optimize the application of mitigation measures, our results recommend the substitution of pin-type insulators to suspended ones and elongating the strings of insulators.

Mitigation action plan for remedial action at the Uranium Mill Tailing Sites and Disposal Site, Rifle, Colorado

International Nuclear Information System (INIS)

1992-07-01

The Estes Gulch disposal site is approximately 10 kilometers (6 miles) north of the town of Rifle, off State Highway 13 on Federal land administered by the Bureau of Land Management. The Department of Energy (DOE) will transport the residual radioactive materials (RRM) by truck to the Estes Gulch disposal site via State Highway 13 and place it in a partially below-grade disposal cell. The RRM will be covered by an earthen radon barrier, frost protection layers, and a rock erosion protection layer. A toe ditch and other features will also be constructed to control erosion at the disposal site. After removal of the RRM and disposal at the Estes Gulch site, the disturbed areas at all three sites will be backfilled with clean soils, contoured to facilitate surface drainage, and revegetated. Wetlands areas destroyed at the former Rifle processing sites will be compensated for by the incorporation of now wetlands into the revegetation plan at the New Rifle site. The UMTRA Project Office, supported by the Remedial Action Contractor (RAC) and the Technical Assistance Contractor (TAC), oversees the implementation of the MAP. The RAC executes mitigation measures in the field. The TAC provides monitoring of the mitigation actions in cases where mitigation measures are associated with design features. Site closeout and inspection compliance will be documented in the site completion report

Patent cliff mitigation strategies: giving new life to blockbusters.

Science.gov (United States)

Kakkar, Ashish Kumar

2015-01-01

With several blockbuster drugs on the brink of another significant patent expiry cliff, innovator pharmaceutical firms are at risk of losing billions of dollars in sales to generic competition. With issues such as staggering R&D costs, reduced productivity and increasing governmental emphasis on pharmacoeconomics, timely planning and implementation of product lifecycle management strategies is becoming indispensable. A variety of strategies designed to mitigate the post-patent expiry revenue loss exist. These approaches range from fairly straightforward measures, such as strategic price cuts and launching own or authorized generics, to complex and lengthy ones, such as new formulations and indications that require companies to reinvent their pharmaceuticals. As patent expiries loom and product pipelines continue to remain thin, proactive planning for generic entry will be critical for pharma companies to drive growth and earnings in a sustainable manner.

Final environmental impact statement for the Nevada Test Site and off-site locations in the state of Nevada: Mitigation action plan

International Nuclear Information System (INIS)

1997-02-01

The DOE Notice of Availability for this environmental impact statement was published in the Federal Register on Friday, October 18, 1996 (61 FR 54437). The final environmental impact statement identifies potential adverse effects resulting from the four use alternatives evaluated and discusses measures that DOE considered for the mitigation of these potential adverse effects. The Secretary of Energy signed the Record of Decision on the management and operation of the Nevada Test Site and other DOE sites in the state of Nevada on December 9, 1996. These decisions will result in the continuation of the multipurpose, multi-program use of the Nevada Test Site, under which DOE will pursue a further diversification of interagency, private industry, and public-education uses while meeting its Defense Program, Waste Management, and Environmental Restoration mission requirements at the Nevada Test Site and other Nevada sites, including the Tonopah Test Range, the Project Shoal Site, the Central Nevada Test Area, and on the Nellis Air Force Range Complex. The Record of Decision also identifies specific mitigation actions beyond the routine day-to-day physical and administrative controls needed for implementation of the decisions. These specific mitigation actions are focused on the transportation of waste and on groundwater availability. This Mitigation Action Plan elaborates on these mitigation commitments

The Implementation of Performance Measurement System (PMS: Malaysian Facilities Management (FM Industry

Directory of Open Access Journals (Sweden)

Myeda N.E.

2014-01-01

Full Text Available Performance Measurement System (PMS is an effective performance measurement tool and technique that is being widely implemented in the global industries. Literature has suggested the significant contributions of its implementation in enhancing the strategic service delivery and performance. However, there is little study undertaken to explore the PMS implementation in Facilities Management (FM industry, particularly focusing on Malaysia. This study explores the PMS practice among FM practitioners and their knowledge in Performance Measurement (PM generally. Findings from this study also proposed the 20 contributing factors that the FM practitioners believed are the barriers in implementing PMS. This research also suggests the future research opportunities in developing a PMS framework that can be used as guidance for FM service delivery in Malaysia.

Simulations and measurements on muzzle blast mitigation with sound absorbing barriers

NARCIS (Netherlands)

Eerden, F.J.M. van der; Berg, F.H.A. van den

2012-01-01

Environmental research is ongoing to predict and to mitigate the noise impact of heavy weapons or explosives. In the densely populated area of the Netherlands this is of particular interest for the Ministry of Defence as the shock waves can propagate over large distances. In this research program

Session: Avoiding, minimizing, and mitigating avian and bat impacts

Energy Technology Data Exchange (ETDEWEB)

Thelander, Carl; Kerlinger, Paul

2004-09-01

This session at the Wind Energy and Birds/Bats workshop consisted of two presentations followed by a discussion/question answer period. The session addressed a variety of questions related to avoiding, minimizing, and mitigating the avian and bat impacts of wind power development including: what has been learned from operating turbines and mitigating impacts where they are unavoidable, such as at Altamont Pass WRA, and should there be mitigation measures such as habitat creation or land conservation where impacts occur. Other impact minimization and mitigation approaches discussed included: location and siting evaluations; options for construction and operation of wind facilities; turbine lighting; and the physical alignment/orientation. Titles and authors of the presentations were: 'Bird Fatalities in the Altamont Pass Wind Resource Area: A Case Study, Part II' by Carl Thelander and 'Prevention and Mitigation of Avian Impacts at Wind Power Facilities' by Paul Kerlinger.

Session: Avoiding, minimizing, and mitigating avian and bat impacts

International Nuclear Information System (INIS)

Thelander, Carl; Kerlinger, Paul

2004-01-01

This session at the Wind Energy and Birds/Bats workshop consisted of two presentations followed by a discussion/question answer period. The session addressed a variety of questions related to avoiding, minimizing, and mitigating the avian and bat impacts of wind power development including: what has been learned from operating turbines and mitigating impacts where they are unavoidable, such as at Altamont Pass WRA, and should there be mitigation measures such as habitat creation or land conservation where impacts occur. Other impact minimization and mitigation approaches discussed included: location and siting evaluations; options for construction and operation of wind facilities; turbine lighting; and the physical alignment/orientation. Titles and authors of the presentations were: 'Bird Fatalities in the Altamont Pass Wind Resource Area: A Case Study, Part II' by Carl Thelander and 'Prevention and Mitigation of Avian Impacts at Wind Power Facilities' by Paul Kerlinger

Severe accident approach - final report. Evaluation of design measures for severe accident prevention and consequence mitigation

International Nuclear Information System (INIS)

Tentner, A.M.; Parma, E.; Wei, T.; Wigeland, R.

2010-01-01

An important goal of the US DOE reactor development program is to conceptualize advanced safety design features for a demonstration Sodium Fast Reactor (SFR). The treatment of severe accidents is one of the key safety issues in the design approach for advanced SFR systems. It is necessary to develop an in-depth understanding of the risk of severe accidents for the SFR so that appropriate risk management measures can be implemented early in the design process. This report presents the results of a review of the SFR features and phenomena that directly influence the sequence of events during a postulated severe accident. The report identifies the safety features used or proposed for various SFR designs in the US and worldwide for the prevention and/or mitigation of Core Disruptive Accidents (CDA). The report provides an overview of the current SFR safety approaches and the role of severe accidents. Mutual understanding of these design features and safety approaches is necessary for future collaborations between the US and its international partners as part of the GEN IV program. The report also reviews the basis for an integrated safety approach to severe accidents for the SFR that reflects the safety design knowledge gained in the US during the Advanced Liquid Metal Reactor (ALMR) and Integral Fast Reactor (IFR) programs. This approach relies on inherent reactor and plant safety performance characteristics to provide additional safety margins. The goal of this approach is to prevent development of severe accident conditions, even in the event of initiators with safety system failures previously recognized to lead directly to reactor damage.

Severe accident approach - final report. Evaluation of design measures for severe accident prevention and consequence mitigation.

Energy Technology Data Exchange (ETDEWEB)

Tentner, A. M.; Parma, E.; Wei, T.; Wigeland, R.; Nuclear Engineering Division; SNL; INL

2010-03-01

An important goal of the US DOE reactor development program is to conceptualize advanced safety design features for a demonstration Sodium Fast Reactor (SFR). The treatment of severe accidents is one of the key safety issues in the design approach for advanced SFR systems. It is necessary to develop an in-depth understanding of the risk of severe accidents for the SFR so that appropriate risk management measures can be implemented early in the design process. This report presents the results of a review of the SFR features and phenomena that directly influence the sequence of events during a postulated severe accident. The report identifies the safety features used or proposed for various SFR designs in the US and worldwide for the prevention and/or mitigation of Core Disruptive Accidents (CDA). The report provides an overview of the current SFR safety approaches and the role of severe accidents. Mutual understanding of these design features and safety approaches is necessary for future collaborations between the US and its international partners as part of the GEN IV program. The report also reviews the basis for an integrated safety approach to severe accidents for the SFR that reflects the safety design knowledge gained in the US during the Advanced Liquid Metal Reactor (ALMR) and Integral Fast Reactor (IFR) programs. This approach relies on inherent reactor and plant safety performance characteristics to provide additional safety margins. The goal of this approach is to prevent development of severe accident conditions, even in the event of initiators with safety system failures previously recognized to lead directly to reactor damage.

Forestry for mitigating the greenhouse effect : an ecological and economic assessment of the potential of land use to mitigate CO2 emissions in the Highlands of Chiapas, Mexico

NARCIS (Netherlands)

Jong, de B.H.J.

2000-01-01

The present study intends to answer some of the important questions that arise when translating projects that have an ecological potential to mitigate carbon excesses, into actual implementation of these projects in a farmer-dominated landscape. Farm and community forestry projects for

Auditor differentiation, mitigating management actions and audit reporting accuracy for distressed firms

NARCIS (Netherlands)

Bruynseels, L.M.L.; Knechel, W.R.; Willekens, M.M.T.A.

2011-01-01

In this paper we examine whether there is auditor differentiation through industry specialization and audit methodology in judging the adequacy of mitigating management actions as implemented by financially distressed companies. Using a sample of U.S. companies from manufacturing industries (SIC

Costs of radon diagnostics and mitigation in school building

International Nuclear Information System (INIS)

Leovic, K.W.; Rector, H.; Nagda, N.

1992-01-01

To determine the costs of radon diagnostics and active soil depressurization (ASD) system installation in schools, seven radon mitigators with extensive experience in school buildings were surveyed. The cost data were determined by providing the mitigators with two scenarios of open-quotes typicalclose quotes school buildings with elevated radon levels. The questionnaire in schools: (1) Review Construction Plans, (2) Conduct Diagnostic Measurements, (3) Design Mitigation System, (4) Purchase ASD Material, and (5) Install and Checkout ASD System. Based on the results of this survey, it is estimated that the average cost of ASD diagnostics and mitigation in a typical school would be roughly $0.50 per ft 2 . However, these costs would be higher in schools with extensive subslab walls, very poor PFE, and lower in simple schools with very good PFE and no subslab barriers to communication. The variations in costs provided by the mitigators are primarily due to the influences of (1) experience and practices of the mitigation companies, (2) ASD system requirements as perceived by the respondents, and (3) the degree of involvement by the school system in the process

Mitigations for Security Vulnerabilities Found in Control System Networks

Energy Technology Data Exchange (ETDEWEB)

Trent D. Nelson

2006-05-01

Industry is aware of the need for Control System (CS) security, but in on-site assessments, Idaho National Laboratory (INL) has observed that security procedures and devices are not consistently and effectively implemented. The Department of Homeland Security (DHS), National Cyber Security Division (NCSD), established the Control Systems Security Center (CSSC) at INL to help industry and government improve the security of the CSs used in the nation's critical infrastructures. One of the main CSSC objectives is to identify control system vulnerabilities and develop effective mitigations for them. This paper discusses common problems and vulnerabilities seen in on-site CS assessments and suggests mitigation strategies to provide asset owners with the information they need to better protect their systems from common security flows.

What factors influence mitigative capacity?

International Nuclear Information System (INIS)

Winkler, Harald; Baumert, Kevin; Blanchard, Odile; Burch, Sarah; Robinson, John

2007-01-01

This article builds on Yohe's seminal piece on mitigative capacity, which elaborates 'determinants' of mitigative capacity, also reflected in the IPCC's third assessment report. We propose a revised definition, where mitigative capacity is a country's ability to reduce anthropogenic greenhouse gas emissions or enhance natural sinks. By 'ability' we mean skills, competencies, fitness, and proficiencies that a country has attained which can contribute to GHG emissions mitigation. A conceptual framework is proposed, linking mitigative capacity to a country's sustainable development path, and grouping the factors influencing mitigative capacity into three main sets: economic factors, institutional ones, and technology. Both quantitative and qualitative analysis of factors is presented, showing how these factors vary across countries. We suggest that it is the interplay between the three economic factors-income, abatement cost and opportunity cost-that shape mitigative capacity. We find that income is an important economic factor influencing mitigative capacity, while abatement cost is important in turning mitigative capacity into actual mitigation. Technology is a critical mitigative capacity, including the ability to absorb existing climate-friendly technologies or to develop innovative ones. Institutional factors that promote mitigative capacity include the effectiveness of government regulation, clear market rules, a skilled work force and public awareness. We briefly investigate such as high abatement cost or lack of political willingness that prevent mitigative capacity from being translated into mitigation

Radon remedial measures in cold climate

International Nuclear Information System (INIS)

Birovljev, A.

2004-01-01

A view is taken that mitigation of an indoor radon problem is often more complex than usually assumed, and that additional factors should be considered to avoid situations in which after mitigation the radon problem may be solved, but other problems have been created. Emphasis is put on how the choice and design of radon remedial measures are influenced not only by effectiveness in reducing radon levels indoors, but also by climatic factors, energy-saving aspects, as well as economic and psycho-social factors. Climatic conditions give rise to several concerns when attempting to mitigate a radon problem in areas with large seasonal temperature variations. Problems with humidity, energy consumption and durability of sealing materials are probably the most prominent issues. Commonly used radon remedial measures and their effectiveness in Norway is reviewed. Discussion is focused on principles and technical solutions which produce good results, and those which don't perform so well in cold Norwegian climate. Innovative technical solutions which successfully resolve some of the main conflicting issues are discussed. Results of some preliminary tests showing performance of such solutions in reduction of radon levels are presented. Other aspects of mitigation systems, such as need and cost of maintenance, longevity, noise levels, 'additional benefits', etc., are briefly mentioned. Homeowners' perceptions and willingness to implement various mitigation solutions are briefly reviewed. Based on discussion, several guiding principles which may be adopted in search for optimal solutions are suggested. (author)

Strategies for implementing a mitigation policy for light water reactors

International Nuclear Information System (INIS)

Kastenberg, W.E.; Hammond, R.P.; Catton, I.; Dooley, J.L.; Castle, J.N.

1988-01-01

Possible strategies are considered for implementing a regulatory policy requiring that power reactor containment enclosures be modified to resist severe core-melt accidents without release of radioactive materials. Such modification was found to be feasible, reliable and cost effective in the work reported in previous studies in this NRC series. Incentives, goals, costs and sources of funding are discussed, and a series of possible implementation steps are presented. 11 refs

Analysis of mitigating measures during steam/hydrogen distributions in nuclear reactor containments with the 3D field code gasflow

International Nuclear Information System (INIS)

Royl, P.; Travis, J.R.; Haytcher, E.A.; Wilkening, H.

1997-01-01

This paper reports on the recent model additions to the 3D field code GASFLOW and on validation and application analyses for steam/hydrogen transport with inclusion of mitigation measures. The results of the 3D field simulation of the HDR test E11.2 are summarized. Results from scoping analyses that simulate different modes of CO2 inertization for conditions from the HDR test T31.5 are presented. The last part discusses different ways of recombiner modeling during 3D distribution simulations and gives the results from validation calculations for the HDR recombiner test E11.8.1 and the Battelle test MC3. The results demonstrate that field code simulations with computer codes like GASFLOW are feasible today for complex containment geometries and that they are necessary for a reliable prediction of hydrogen/steam distribution and mitigation effects. (author)

Comprehensive mitigation assessment process (COMAP) - Description and instruction manual

Energy Technology Data Exchange (ETDEWEB)

Makundi, Willy; Sathaye, Jayant

2001-11-09

In order to prepare policies and plans to reduce GHG emissions, national policy-makers need information on the costs and benefits of different mitigation options in addition to their carbon implications. Policy-makers must weigh the costs, benefits, and impacts of climate change mitigation and adaptation options, in the face of competition for limited resources. The policy goal for mitigation options in the land use sector is to identify which mix of options is likely to best achieve the desired forestry service and production objectives at the least cost, while attempting to maximize economic and social benefits, and minimize negative environmental and social impacts. Improved national-level cost estimates of response options in the land use sector can be generated by estimating the costs and benefits of different forest management practices appropriate for specific country conditions which can be undertaken within the constraint of land availability and its opportunity cost. These co st and land use estimates can be combined to develop cost curves, which would assist policy-makers in constructing policies and programs to implement forest responses.

Risk Mitigation of Emerging Zoonoses: Hendra Virus and Non-Vaccinating Horse Owners.

Science.gov (United States)

Manyweathers, J; Field, H; Jordan, D; Longnecker, N; Agho, K; Smith, C; Taylor, M

2017-12-01

Hendra virus was identified in horses and humans in 1994, in Queensland, Australia. Flying foxes are the natural host. Horses are thought to acquire infection by direct or indirect contact with infected flying fox urine. Humans are infected from close contact with infected horses. To reduce risk of infection in horses and humans, Australian horse owners are encouraged to vaccinate horses against the virus and adopt property risk mitigation practices that focus on reducing flying fox horse contact and contamination of horses' environment with flying fox bodily fluids. This study investigates uptake of four Hendra virus risk mitigation practices in a sample of non- and partially vaccinating horse owners living close to previous Hendra virus cases. Protection motivation theory was used to develop a conceptual model to investigate risk perception and coping factors associated with uptake of risk mitigation practices. An online survey was administered via Facebook pages of veterinary clinics close to previous Hendra virus cases. Factors associated with uptake of risk mitigation practices were investigated using univariate and multivariate binary logistic regression. Belief that a risk mitigation practice would be effective in reducing Hendra virus risk was significantly associated with the uptake of that practice. Issues around the practicality of implementing risk mitigation practices were found to be the greatest barrier to uptake. Factors that relate to risk immediacy, such as nearby infection, were identified as more likely to trigger uptake of risk mitigation practices. The role of veterinarians in supporting Hendra risk mitigation was identified as more influential than that of respected others or friends. Findings from this study are being used to assist stakeholders in Australia responsible for promotion of risk mitigation practice in identifying additional pathways and reliable influencing factors that could be utilized for engaging and communicating with horse

Experience measuring performance improvement in multiphase picture archiving and communications systems implementations.

Science.gov (United States)

Reed, G; Reed, D H

1999-05-01

When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial data; (2) productivity data; (3) operational parameters; (4) clinical data; and (5) information about customer satisfaction. In the authors' experience, detailed workflow data have not proved valuable in measuring PACS performance and outcomes. Reviewing only one category of data in planning will not provide adequate basis for targeting operational improvements that will lead to the most significant gains. Quality improvement takes into account all factors in production: human capacity, materials, operating capital and assets. Once we have identified key areas of focus for quality improvement in each phase, we can translate objectives into implementation requirements and finally into detailed functional and performance requirements. Here, Integration Resources reports its experience measuring PACS performance relative to phased implementation strategies for three large medical centers. Each medical center had its own objectives for overcoming image management, physical/geographical, and functional/technical barriers. The report outlines (1) principal financial and nonfinancial measures used as performance indicators; (2) implementation strategies chosen by each of the three medical centers; and (3) the results of those strategies as compared with baseline data.

University building safety index measurement using risk and implementation matrix

Science.gov (United States)

Rahman, A.; Arumsari, F.; Maryani, A.

2018-04-01

Many high rise building constructed in several universities in Indonesia. The high-rise building management must provide the safety planning and proper safety equipment in each part of the building. Unfortunately, most of the university in Indonesia have not been applying safety policy yet and less awareness on treating safety facilities. Several fire accidents in university showed that some significant risk should be managed by the building management. This research developed a framework for measuring the high rise building safety index in university The framework is not only assessed the risk magnitude but also designed modular building safety checklist for measuring the safety implementation level. The safety checklist has been developed for 8 types of the university rooms, i.e.: office, classroom, 4 type of laboratories, canteen, and library. University building safety index determined using risk-implementation matrix by measuring the risk magnitude and assessing the safety implementation level. Building Safety Index measurement has been applied in 4 high rise buildings in ITS Campus. The building assessment showed that the rectorate building in secure condition and chemical department building in beware condition. While the library and administration center building was in less secure condition.

Advance strategy for climate change adaptation and mitigation in cities

Science.gov (United States)

Varquez, A. C. G.; Kanda, M.; Darmanto, N. S.; Sueishi, T.; Kawano, N.

2017-12-01

An on-going 5-yr project financially supported by the Ministry of Environment, Japan, has been carried out to specifically address the issue of prescribing appropriate adaptation and mitigation measures to climate change in cities. Entitled "Case Study on Mitigation and Local Adaptation to Climate Change in an Asian Megacity, Jakarta", the project's relevant objectives is to develop a research framework that can consider both urbanization and climate change with the main advantage of being readily implementable for all cities around the world. The test location is the benchmark city, Jakarta, Indonesia, with the end focus of evaluating the benefits of various mitigation and adaptation strategies in Jakarta and other megacities. The framework was designed to improve representation of urban areas when conducting climate change investigations in cities; and to be able to quantify separately the impacts of urbanization and climate change to all cities globally. It is comprised of a sophisticated, top-down, multi-downscaling approach utilizing a regional model (numerical weather model) and a microscale model (energy balance model and CFD model), with global circulation models (GCM) as input. The models, except the GCM, were configured to reasonably consider land cover, urban morphology, and anthropogenic heating (AH). Equally as important, methodologies that can collect and estimate global distribution of urban parametric and AH datasets are continually being developed. Urban growth models, climate scenario matrices that match representative concentration pathways with shared socio-economic pathways, present distribution of socio-demographic indicators such as population and GDP, existing GIS datasets of urban parameters, are utilized. From these tools, future urbanization (urban morphological parameters and AH) can be introduced into the models. Sensitivity using various combinations of GCM and urbanization can be conducted. Furthermore, since the models utilize

1997 Monitoring report for the Gunnison, Colorado Wetlands Mitigation Plan

International Nuclear Information System (INIS)

1997-11-01

Under the Uranium Mill Tailings Remedial Action (UMTRA) Project, the U.S. Department of Energy (DOE) cleaned up uranium mill tailings and other surface contamination near the town of Gunnison, Colorado. Remedial action resulted in the elimination of 4.3 acres (ac) (1.7 hectares [ha]) of wetlands. This loss is mitigated by the enhancement of six spring-fed areas on Bureau of Land Management (BLM) land (mitigation sites). Approximately 254 ac (1 03.3 ha) were fenced at the six sites to exclude grazing livestock. Of the 254 ac (103.3 ha), 17.8 ac (7.2 ha) are riparian plant communities; the rest are sagebrush communities. Baseline grazed conditions of the riparian plant communities at the mitigation sites were measured prior to fencing. This report discusses results of the fourth year of a monitoring program implemented to document the response of vegetation and wildlife to the exclusion of livestock. Three criteria for determining success of the mitigation were established: plant height, vegetation density (bare ground), and vegetation diversity. By 1996, Prospector Spring, Upper Long's Gulch, and Camp Kettle met the criteria. The DOE requested transfer of these sites to BLM for long-term oversight. The 1997 evaluation of the three remaining sites, discussed in this report, showed two sites (Houston Gulch and Lower Long's Gulch) meet the criteria. The DOE will request the transfer of these two sites to the BLM for long-term oversight. The last remaining site, Sage Hen Spring, has met only two of the criteria (percent bare ground and plant height). The third criterion, vegetation diversity, was not met. The vegetation appears to be changing from predominantly wet species to drier upland species, although the reason for this change is uncertain. It may be due to below-normal precipitation in recent years, diversion of water from the spring to the stock tank, or manipulation of the hydrology farther up gradient

Delay Mitigation in the Malaysian Housing Industry: A Structural Equation Modelling Approach

Directory of Open Access Journals (Sweden)

Chang Saar Chai

2015-01-01

Full Text Available The housing industry is one of the major contributors to the economy in Malaysia due to the constantly high housing demand. The housing demand has increased due to the rapid growth in population and urbanisation in the country. One of the major challenges in the housing industry is the late delivery of housing supply, which in some instances leads to sick and abandoned housing projects. Despite being extensively investigated, th in a negative impact, there is a strong need to review the housing delay mitigation measures practised in Malaysia. This paper aims to evaluate the current delay mitigation measures and its main objective is to explore the relationship between the mitigation measures and delay in housing via a Structural Equation Modelling (SEM approach. A questionnaire survey through an online survey tool was conducted across 13 states and three Federal Territories in Malaysia. The target respondents are the local authorities, developers, consultants (principal submitting persons and contractors. The findings show that 17 predictive, preventive, organisational or corrective. This paper demonstrates that preventive measures are the most influential mitigation measures for housing delivery delay.

Exploring policy strategies for mitigating HFC emissions from refrigeration and air conditioning

NARCIS (Netherlands)

Hekkenberg, M.; Uiterkamp, Anton J. M. Schoot

The growing demand for cooling throughout the world, possibly increased by global climate change, requires the implementation of policies to mitigate the related greenhouse gas (GHG) emissions from energy and refrigerant use in the refrigeration and air conditioning (RAC) sector. This article aims

Communicating risk and promoting disease mitigation measures in epidemics and emerging disease settings.

Science.gov (United States)

Schiavo, Renata; May Leung, May; Brown, Mason

2014-03-01

This review aims to identify and assess evidence on interventions to communicate risk and promote disease mitigation measures in epidemics and emerging disease outbreak settings. The study focuses on data that are relevant to low and middle-income country (LMIC) settings. We conducted a comprehensive literature search using five major electronic databases (Pubmed Medline, Biomed Central, EMBASE, Science of Citation Index, and Cochrane Library) and other sources to identify relevant studies published from January 2002 to July 2013. The review was guided by the socio-ecological model/perspective of public health and the ideation theory and focused on interventions at the community, healthcare, and multi-sectoral settings, which also reflect key intervention levels of the Ottawa Charter for Health Promotion. Eligible quantitative studies were selected according to specific study criteria and assessed using the Critical Appraisal Skills Program (CASP) framework. Conversely, qualitative studies, reviews, case studies, and editorials were not included. Studies were selected by two independent reviewers. Twenty-nine relevant studies from 16 countries were included. Most studies focused on a single intervention or intervention level, rather than multi-sectoral interventions. The majority of the evidence relates to programs aimed at behavioral and social results (or relevant intermediate steps) within a specific population group. Two studies included implications for improvements in health service delivery, two studies examined the intervention's impact on health systems-related outcomes, and three had also implications for environmental health outcomes. Cost- and health equity-related implications for select evidence were also discussed. The paucity of well-designed quantitative evaluations of interventions to communicate health risk and promote disease control measures in LMICs does not allow for any definitive conclusions. Yet, the review identified several promising

Impact mitigation in EIA

OpenAIRE

Bond, Alan; Cashmore, Matthew; Cobb, Dick; Tinker, Lauren

2005-01-01

This study analysed 40 planning applications in the East of England to investigate the practice of translating paper recommendations in the environmental statement (ES) into legal conditions and obligations. A high proportion (50%) of suggested mitigation measures were not translated into planning conditions or obligations. However, a significant number of additional conditions or obligations, not directly based on the ES, were imposed on developers. The research su...

Silk industry and carbon footprint mitigation

Science.gov (United States)

Giacomin, A. M.; Garcia, J. B., Jr.; Zonatti, W. F.; Silva-Santos, M. C.; Laktim, M. C.; Baruque-Ramos, J.

2017-10-01

Currently there is a concern with issues related to sustainability and more conscious consumption habits. The carbon footprint measures the total amount of greenhouse gas (GHG) emissions produced directly and indirectly by human activities and is usually expressed in tonnes of carbon dioxide (CO2) equivalents. The present study takes into account data collected in scientific literature regarding the carbon footprint, garments produced with silk fiber and the role of mulberry as a CO2 mitigation tool. There is an indication of a positive correlation between silk garments and carbon footprint mitigation when computed the cultivation of mulberry trees in this calculation. A field of them mitigates CO2 equivalents in a proportion of 735 times the weight of the produced silk fiber by the mulberry cultivated area. At the same time, additional researches are needed in order to identify and evaluate methods to advertise this positive correlation in order to contribute to a more sustainable fashion industry.

Model based hydropower gate operation for mitigation of CSO impacts by means of river base flow increase.

Science.gov (United States)

Achleitner, S; De Toffol, S; Engelhard, C; Rauch, W

2005-01-01

In river stretches being subjected to flow regulation, usually for the purpose of energy production (e.g. Hydropower) or flood protection (river barrage), a special measure can be taken against the effect of combined sewer overflows (CSOs). The basic idea is the temporal increase of the river base flow (during storm weather) as an in-stream measure for mitigation of CSO spilling. The focus is the mitigation of the negative effect of acute pollution of substances. The measure developed can be seen as an application of the classic real time control (RTC) concept onto the river system. Upstream gate operation is to be based on real time monitoring and forecasting of precipitation. The main objective is the development of a model based predictive control system for the gate operation, by modelling of the overall wastewater system (incl. the receiving water). The main emphasis is put on the operational strategy and the appropriate short-term forecast of spilling events. The potential of the measure is tested for the application of the operational strategy and its ecological and economic feasibility. The implementation of such an in-stream measure into the hydropower's operational scheme is unique. Advantages are (a) the additional in-stream dilution of acute pollutants entering the receiving water and (b) the resulting minimization of the required CSO storage volume.

Implementing and Characterizing Precise Multiqubit Measurements

Directory of Open Access Journals (Sweden)

J. Z. Blumoff

2016-09-01

Full Text Available There are two general requirements to harness the computational power of quantum mechanics: the ability to manipulate the evolution of an isolated system and the ability to faithfully extract information from it. Quantum error correction and simulation often make a more exacting demand: the ability to perform nondestructive measurements of specific correlations within that system. We realize such measurements by employing a protocol adapted from Nigg and Girvin [Phys. Rev. Lett. 110, 243604 (2013], enabling real-time selection of arbitrary register-wide Pauli operators. Our implementation consists of a simple circuit quantum electrodynamics module of four highly coherent 3D transmon qubits, collectively coupled to a high-Q superconducting microwave cavity. As a demonstration, we enact all seven nontrivial subset-parity measurements on our three-qubit register. For each, we fully characterize the realized measurement by analyzing the detector (observable operators via quantum detector tomography and by analyzing the quantum backaction via conditioned process tomography. No single quantity completely encapsulates the performance of a measurement, and standard figures of merit have not yet emerged. Accordingly, we consider several new fidelity measures for both the detector and the complete measurement process. We measure all of these quantities and report high fidelities, indicating that we are measuring the desired quantities precisely and that the measurements are highly nondemolition. We further show that both results are improved significantly by an additional error-heralding measurement. The analyses we present here form a useful basis for the future characterization and validation of quantum measurements, anticipating the demands of emerging quantum technologies.

Sustained Implementation Support Scale: Validation of a Measure of Program Characteristics and Workplace Functioning for Sustained Program Implementation.

Science.gov (United States)

Hodge, Lauren M; Turner, Karen M T; Sanders, Matthew R; Filus, Ania

2017-07-01

An evaluation measure of enablers and inhibitors to sustained evidence-based program (EBP) implementation may provide a useful tool to enhance organizations' capacity. This paper outlines preliminary validation of such a measure. An expert informant and consumer feedback approach was used to tailor constructs from two existing measures assessing key domains associated with sustained implementation. Validity and reliability were evaluated for an inventory composed of five subscales: Program benefits, Program burden, Workplace support, Workplace cohesion, and Leadership style. Exploratory and confirmatory factor analysis with a sample of 593 Triple P-Positive Parenting Program-practitioners led to a 28-item scale with good reliability and good convergent, discriminant, and predictive validity. Practitioners sustaining implementation at least 3 years post-training were more likely to have supervision/peer support, reported higher levels of program benefit, workplace support, and positive leadership style, and lower program burden compared to practitioners who were non-sustainers.

Fuel carbon intensity standards may not mitigate climate change

International Nuclear Information System (INIS)

Plevin, Richard J.; Delucchi, Mark A.; O’Hare, Michael

2017-01-01

To mitigate the climate change effects of transportation, the US states of California and Oregon, the Canadian province of British Columbia, and the European Union have implemented regulations to reduce the life cycle greenhouse gas (GHG) emissions intensity of transport fuel, commonly referred to as 'carbon intensity', or CI. In this article, we unpack the theory and practice of fuel CI standards, examining claims regarding climate-change mitigation. We show that these standards do not reliably mitigate climate change because estimates of GHG reductions rely primarily on models that are not designed to estimate changes in emissions and climate impacts. Some regulations incorporate models that estimate a subset of changes in emissions, but the models must project changes in global markets over decades, and there is little agreement about the best model structure or parameter values. Since multiple models and projections may be equally plausible, fuel CI is inevitably subjective and unverifiable. We conclude that regulating or taxing observable emissions would more reliably achieve emission reduction. - Highlights: • Use of fuel carbon intensity (CI) standards has been expanding recently. • Fuel CI ratings are subjective, scenario- and model-dependent. • Uncertainty in fuel CI ratings creates uncertainty in policy outcomes. • There is no reliable test of whether fuel CI standards mitigate climate change. • Regulating or taxing observable emissions would be a more reliable approach.

Mitigation of hydrogen hazards in water cooled power reactors

International Nuclear Information System (INIS)

2001-02-01

post-accident containments is complex and highly plant- and scenario-specific. Many aspects must be considered in analysis of a hydrogen threat: accident sequences, hydrogen production rates, atmosphere thermal hydraulics, mixing processes, combustion phenomena, accident management strategies and mitigation hardware performance. Research activities on these topics have been continuing in several countries for the past two decades. This report summarizes current concepts for hydrogen mitigation in containments, concentrating primarily on measures that are already being implemented or those that show promise in the near future for hydrogen mitigation in severe accidents

Annual monitoring report for the Gunnison, Colorado, wetlands mitigation plan

International Nuclear Information System (INIS)

1995-10-01

The US Department of Energy (DOE) administers the Uranium Mill Tailings Remedial Action (UMTRA) Project to clean up uranium mill tailings and other surface contamination at 24 abandoned uranium mill sites in 10 states. One of these abandoned mill sites is near the town of Gunnison, Colorado; surface remediation and the environmental impacts of remedial action are described in the Gunnison environmental assessment (EA) (DOE, 1992). Remedial action resulted in the elimination of 4.3 acres (ac) 1.7 hectares (ha) of wetlands and mitigation of this loss of wetlands is being accomplished through the enhance of 18.4 ac (7.5 ha) of riparian plant communities in six spring feed areas on Bureau of Land Management (BLM) land. The description of the impacted and mitigation wetlands is provided in the Mitigation and Monitoring Plan for Impacted Wetlands at the Gunnison UMTRA Project Site, Gunnison, Colorado (DOE, 1994), which is attached to the US Army corps of Engineers (USACE) Section 404 Permit. As part of the wetlands mitigation plan, the six mitigation wetlands were fenced in the fall of 1993 to exclude livestock grazing. Baseline of grazed conditions of the wetlands vegetation was determined during the summer of 1993 (DOE, 1994). A 5-year monitoring program of these six sites has been implemented to document the response of vegetation and wildlife to the exclusion of livestock. This annual monitoring report provides the results of the first year of the 5-year monitoring period

Experts' perspectives on the implementation of traceability in Europe

NARCIS (Netherlands)

Kher, S.V.; Frewer, L.J.; Jonge, J.de; Wentholt, M.; Davies, O.H.; Luijckx, N.B.L.; Cnossen, H.J.

2010-01-01

Purpose: The research presented in this paper aims at understanding the views of European food risk management experts on food traceability implementation, implementation of the general food law, and the advantages the system can offer for effective risk mitigation. Design/methodology/approach:

How far does a big push really push? : Mitigating ultra-poverty in Bangladesh

NARCIS (Netherlands)

F.A. Misha (Farzana); W.A. Raza (Wameq); J. Ara (Jinnat); E. Van de Poel (Ellen)

2014-01-01

textabstractBRAC implemented the Challenging the Frontiers of Poverty Reduction: Specially Targeted Ultra-Poor (CFPR) program in 2002 to mitigate ultra-poverty in the poorest districts of Bangladesh, providing multifaceted support in the form of asset-transfer, food-stipends, education, healthcare

Blast mitigation experimental and numerical studies

CERN Document Server

2013-01-01

Presents experimental methods of material and structural response to dynamic blast loads Includes computational analysis of material and structural response to dynamic blast loads Offers mitigation measures for structures in various environments Relates lab experiments to larger field tests Features more than 150 illustrations

Farmers' Intentions to Implement Foot and Mouth Disease Control Measures in Ethiopia.

Science.gov (United States)

Jemberu, Wudu T; Mourits, M C M; Hogeveen, H

2015-01-01

The objectives of this study were to explore farmers' intentions to implement foot and mouth disease (FMD) control in Ethiopia, and to identify perceptions about the disease and its control measures that influence these intentions using the Health Belief Model (HBM) framework. Data were collected using questionnaires from 293 farmers in three different production systems. The influence of perceptions on the intentions to implement control measures were analyzed using binary logistic regression. The effect of socio-demographic and husbandry variables on perceptions that were found to significantly influence the intentions were analyzed using ordinal logistic regression. Almost all farmers (99%) intended to implement FMD vaccination free of charge. The majority of farmers in the pastoral (94%) and market oriented (92%) systems also had the intention to implement vaccination with charge but only 42% of the crop-livestock mixed farmers had the intention to do so. Only 2% of pastoral and 18% of crop-livestock mixed farmers had the intention to implement herd isolation and animal movement restriction continuously. These proportions increased to 11% for pastoral and 50% for crop-livestock mixed farmers when the measure is applied only during an outbreak. The majority of farmers in the market oriented system (>80%) had the intention to implement herd isolation and animal movement restriction measure, both continuously and during an outbreak. Among the HBM perception constructs, perceived barrier was found to be the only significant predictor of the intention to implement vaccination. Perceived susceptibility, perceived benefit and perceived barrier were the significant predictors of the intention for herd isolation and animal movement restriction measure. In turn, the predicting perceived barrier on vaccination control varied significantly with the production system and the age of farmers. The significant HBM perception predictors on herd isolation and animal movement

Farmers’ Intentions to Implement Foot and Mouth Disease Control Measures in Ethiopia

Science.gov (United States)

Jemberu, Wudu T.; Mourits, M. C. M.; Hogeveen, H.

2015-01-01

The objectives of this study were to explore farmers’ intentions to implement foot and mouth disease (FMD) control in Ethiopia, and to identify perceptions about the disease and its control measures that influence these intentions using the Health Belief Model (HBM) framework. Data were collected using questionnaires from 293 farmers in three different production systems. The influence of perceptions on the intentions to implement control measures were analyzed using binary logistic regression. The effect of socio-demographic and husbandry variables on perceptions that were found to significantly influence the intentions were analyzed using ordinal logistic regression. Almost all farmers (99%) intended to implement FMD vaccination free of charge. The majority of farmers in the pastoral (94%) and market oriented (92%) systems also had the intention to implement vaccination with charge but only 42% of the crop-livestock mixed farmers had the intention to do so. Only 2% of pastoral and 18% of crop-livestock mixed farmers had the intention to implement herd isolation and animal movement restriction continuously. These proportions increased to 11% for pastoral and 50% for crop-livestock mixed farmers when the measure is applied only during an outbreak. The majority of farmers in the market oriented system (>80%) had the intention to implement herd isolation and animal movement restriction measure, both continuously and during an outbreak. Among the HBM perception constructs, perceived barrier was found to be the only significant predictor of the intention to implement vaccination. Perceived susceptibility, perceived benefit and perceived barrier were the significant predictors of the intention for herd isolation and animal movement restriction measure. In turn, the predicting perceived barrier on vaccination control varied significantly with the production system and the age of farmers. The significant HBM perception predictors on herd isolation and animal movement

A country framework for analyzing climate change mitigation

International Nuclear Information System (INIS)

King, K.

1995-01-01

Once the global community accepted the threat of global climate change as a serious one, many countries began to study its possible consequences and the scope for national action that could help mitigate it. Governments will find that national climate change studies are useful quite apart from helping them to fulfill commitments under the FCCC. All countries, developed and developing, will benefit from an understanding of the sacrifice they need to make for the greater benefit of climate change mitigation. This sacrifice - that is, the set of trade-offs or the 'added burden' - is what economists refer to as the 'incremental cost' of climate change mitigation actions. All countries will benefit from knowing what these costs are and from knowing how much their national action will matter. Using measures of cost and mitigation, they will be able to choose from among their alternative national actions those with the greatest effect and the lowest incremental cost. Eligible countries can also use these measures to negotiate the amount of financial assistance they need from the financial mechanism of the FCCC or other sources. A country framework for medium-term considerations will yield results useful for investment planning, policy choice, and financial reimbursement (where appropriate). This is the focus of the framework outlined in this paper. (EG) 15 refs

Measuring up: Implementing a dental quality measure in the electronic health record context.

Science.gov (United States)

Bhardwaj, Aarti; Ramoni, Rachel; Kalenderian, Elsbeth; Neumann, Ana; Hebballi, Nutan B; White, Joel M; McClellan, Lyle; Walji, Muhammad F

2016-01-01

Quality improvement requires using quality measures that can be implemented in a valid manner. Using guidelines set forth by the Meaningful Use portion of the Health Information Technology for Economic and Clinical Health Act, the authors assessed the feasibility and performance of an automated electronic Meaningful Use dental clinical quality measure to determine the percentage of children who received fluoride varnish. The authors defined how to implement the automated measure queries in a dental electronic health record. Within records identified through automated query, the authors manually reviewed a subsample to assess the performance of the query. The automated query results revealed that 71.0% of patients had fluoride varnish compared with the manual chart review results that indicated 77.6% of patients had fluoride varnish. The automated quality measure performance results indicated 90.5% sensitivity, 90.8% specificity, 96.9% positive predictive value, and 75.2% negative predictive value. The authors' findings support the feasibility of using automated dental quality measure queries in the context of sufficient structured data. Information noted only in free text rather than in structured data would require using natural language processing approaches to effectively query electronic health records. To participate in self-directed quality improvement, dental clinicians must embrace the accountability era. Commitment to quality will require enhanced documentation to support near-term automated calculation of quality measures. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

Coordination of short-term and long-term mitigation measures of hydro-meteorological risks: the importance of establishing a link between emergency management and spatial planning

Science.gov (United States)

Prenger-Berninghoff, Kathrin; Cortes, V. Juliette; Aye, Zar Chi; Sprague, Teresa

2013-04-01

The management of natural hazards involves, as generally known, the four stages of the risk management cycle: Prevention, preparedness, response and recovery. Accordingly, the mitigation of disasters can be performed in terms of short-term and long-term purposes. Whereas emergency management or civil protection helps to strengthen a community's capacity to be better prepared for natural hazards and to better respond in case a disaster strikes, thus addressing the short-term perspective, spatial planning serves long-term planning goals and can therefore implement long-term prevention measures. A purposefully applied risk mitigation strategy requires coordination of short-term and long-term mitigation measures and thus an effective coordination of emergency management and spatial planning. Several actors are involved in risk management and should consequently be linked throughout the whole risk management cycle. However, these actors, partly because of a historically fragmented administrative system, are hardly connected to each other, with spatial planning only having a negligible role compared to other actors1, a problem to which Young (2002) referred to as the "problem of interplay". In contrast, information transfer and decision-taking happen at the same time and are not coordinated among different actors. This applies to the prevention and preparedness phase as well as to the recovery phase, which basically constitutes the prevention phase for the next disaster2. Since investments in both risk prevention and emergency preparedness and response are considered necessary, a better coordination of the two approaches is required. In this regard, Decision Support Systems (DSS) can be useful in order to provide support in the decision-making aspect of risk management. The research work currently undertaken examines the problem of interplay in the four case study areas of the Marie Curie ITN, CHANGES3. The link between different risk management actors will be explored

System design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

International Nuclear Information System (INIS)

Truitt, R.W.; Pounds, T.S.; Smith, S.O.

1994-01-01

This document describes the hardware subsystems of the data acquisition and control system (DACS) used in mitigation tests conducted on waste tank SY-101 at the Hanford Nuclear Reservation. The system was designed and implemented by Los Alamos National Laboratory (LANL) and supplied to Westinghouse Hanford Company (WHC). The mitigation testing uses a pump immersed in the waste tank, directed at certain angles and operated at different speeds and time durations. The SY-101 tank has experienced recurrent periodic gas releases of hydrogen, nitrous oxide, ammonia, and (recently discovered) methane. The hydrogen gas represents a danger, as some of the releases are in amounts above the lower flammability limit (LFL). These large gas releases must be mitigated. Several instruments have been added to the tank to monitor the gas compositions, the tank level, the tank temperature, and other parameters. A mixer pump has been developed to stir the tank waste to cause the gases to be released at a slow rate. It is the function of the DACS to monitor those instruments and to control the mixer pump in a safe manner. During FY93 and FY94 the mixer pump was installed with associated testing operations support equipment and a mitigation test project plan was implemented. These activities successfully demonstrated the mixer pump's ability to mitigate the SY-101 tank hydrogen gas hazard

International Experiences with Quantifying the Co-Benefits of Energy-Efficiency and Greenhouse-Gas Mitigation Programs and Policies

Energy Technology Data Exchange (ETDEWEB)

Williams, Christopher [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Lynn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wu, Grace [Univ. of California, Berkeley, CA (United States)

2012-09-30

Improving the efficiency of energy production and consumption and switching to lower carbon energy sources can significantly decrease carbon dioxide (CO2) emissions and reduce climate change impacts. A growing body of research has found that these measures can also directly mitigate many non-climate change related human health hazards and environmental damage. Positive impacts of policies and programs that occur in addition to the intended primary policy goal are called co-benefits. Policy analysis relies on forecasting and comparing the costs of policy and program implementation and the benefits that accrue to society from implementation. GHG reduction and energy efficiency policies and programs face political resistance in part because of the difficulty of quantifying their benefits. On the one hand, climate change mitigation policy benefits are often global, long-term, and subject to large uncertainties, and subsidized energy pricing can reduce the direct monetary benefits of energy efficiency policies to below their cost. On the other hand, the co-benefits that accrue from these efforts’ resultant reductions in conventional air pollution (such as improved health, agricultural productivity, reduced damage to infrastructure, and local ecosystem improvements) are generally near term, local, and more certain than climate change mitigation benefits and larger than the monetary value of energy savings. The incorporation of co-benefits into energy efficiency and climate mitigation policy and program analysis therefore might significantly increase the uptake of these policies. Faster policy uptake is especially important in developing countries because ongoing development efforts that do not consider co-benefits may lock in suboptimal technologies and infrastructure and result in high costs in future years. Over the past two decades, studies have repeatedly documented that non-climate change related benefits of energy efficiency and fuel conversion efforts, as a part

Noise and LPI radar as part of counter-drone mitigation system measures

Science.gov (United States)

Zhang, Yan (Rockee); Huang, Yih-Ru; Thumann, Charles

2017-05-01

With the rapid proliferation of small unmanned aerial systems (UAS) in the national airspace, small operational drones are being sometimes considered as a security threat for critical infrastructures, such as sports stadiums, military facilities, and airports. There have been many civilian counter-drone solutions and products reported, including radar and electromagnetic counter measures. For the current electromagnetic solutions, they are usually limited to particular type of detection and counter-measure scheme, which is usually effective for the specific type of drones. Also, control and communication link technologies used in even RC drones nowadays are more sophisticated, making them more difficult to detect, decode and counter. Facing these challenges, our team proposes a "software-defined" solution based on noise and LPI radar. For the detection, wideband-noise radar has the resolution performance to discriminate possible micro-Doppler features of the drone versus biological scatterers. It also has the benefit of more adaptive to different types of drones, and covertly detecting for security application. For counter-measures, random noise can be combined with "random sweeping" jamming scheme, to achieve the optimal balance between peak power allowed and the effective jamming probabilities. Some theoretical analysis of the proposed solution is provided in this study, a design case study is developed, and initial laboratory experiments, as well as outdoor tests are conducted to validate the basic concepts and theories. The study demonstrates the basic feasibilities of the Drone Detection and Mitigation Radar (DDMR) concept, while there are still much work needs to be done for a complete and field-worthy technology development.

Use of Nuclear Material Accounting and Control for Nuclear Security Purposes at Facilities. Implementing Guide

International Nuclear Information System (INIS)

2015-01-01

Nuclear material accounting and control (NMAC) works in a complementary fashion with the international safeguards programme and physical protection systems to help prevent, deter or detect the unauthorized acquisition and use of nuclear materials. These three methodologies are employed by Member States to defend against external threats, internal threats and both state actors and non-state actors. This publication offers guidance for implementing NMAC measures for nuclear security at the nuclear facility level. It focuses on measures to mitigate the risk posed by insider threats and describes elements of a programme that can be implemented at a nuclear facility in coordination with the physical protection system for the purpose of deterring and detecting unauthorized removal of nuclear material

Financial Impact of Cancer Drug Wastage and Potential Cost Savings From Mitigation Strategies.

Science.gov (United States)

Leung, Caitlyn Y W; Cheung, Matthew C; Charbonneau, Lauren F; Prica, Anca; Ng, Pamela; Chan, Kelvin K W

2017-07-01

Cancer drug wastage occurs when a parenteral drug within a fixed vial is not administered fully to a patient. This study investigated the extent of drug wastage, the financial impact on the hospital budget, and the cost savings associated with current mitigation strategies. We conducted a cross-sectional study in three University of Toronto-affiliated hospitals of various sizes. We recorded the actual amount of drug wasted over a 2-week period while using current mitigation strategies. Single-dose vial cancer drugs with the highest wastage potentials were identified (14 drugs). To calculate the hypothetical drug wastage with no mitigation strategies, we determined how many vials of drugs would be needed to fill a single prescription. The total drug costs over the 2 weeks ranged from $50,257 to $716,983 in the three institutions. With existing mitigation strategies, the actual drug wastage over the 2 weeks ranged from $928 to $5,472, which was approximately 1% to 2% of the total drug costs. In the hypothetical model with no mitigation strategies implemented, the projected drug cost wastage would have been $11,232 to $149,131, which accounted for 16% to 18% of the total drug costs. As a result, the potential annual savings while using current mitigation strategies range from 15% to 17%. The financial impact of drug wastage is substantial. Mitigation strategies lead to substantial cost savings, with the opportunity to reinvest those savings. More research is needed to determine the appropriate methods to minimize risk to patients while using the cost-saving mitigation strategies.

Assessment of the implementation risks for ALFRED demonstrator

International Nuclear Information System (INIS)

Constantin, M.; Diaconu, D.

2016-01-01

The risks related to the implementation of ALFRED demonstrator in Romania are discussed. The assessment is based on the risk matrix approach. Two groups of experts were used in the investigation: participants in FP7 ARCADIA projects and members of the FALCON consortium. The results consist of the hierarchy of the risks obtained based on the appreciations of the two groups. They are comparatively presented and discussed in terms of the identified critical risks and possible measures for prevention and mitigation. Additionally, some elements derived from the experience of similar project such as SUSEN and ELI-NP are discussed. (authors)

Mitigation and Compensation under EU Nature Conservation Law in the Flemish Region: Beyond the Deadlock for Development Projects?

Directory of Open Access Journals (Sweden)

Hendrik Schoukens

2014-05-01

Full Text Available For years, the predicament of many of the European protected habitats and species in the Flemish Region, as in many other Member States, passed relatively unnoticed. The lack of proper rules and clear implementation rules fuelled the impression amongst project developers and planning authorities that the impacts of project developments on biodiversity did not really warrant closer assessment. However, in the past ten years, strict national case law has significantly altered this view. Faced with tighter judicial scrutiny, the Habitats and Birds Directives were seen as an important obstacle to project development. Hence mitigation and compensation have now come up as novel approaches to better align spatial aspirations with the conservation of nature. In reality, mitigation was often used as a cover-up for projects that would not fit the strict requirements enshrined in the derogatory clauses. Interestingly, the Belgian Council of State showed itself quite cautious in reasserting the lax view of some planning authorities on mitigation and compensation. In reviewing the legality of several new approaches to mitigation and compensation, the Belgian Council of State, which was initially very cautious in quashing decisions that would actually jeopardise major infrastructure developments, has rendered some compelling rulings on the specific application of mitigation and compensatory measures in a spatial planning context. By letting the objectives of EU nature conservation law prevail in the face of economic interests, the recent case law of the Belgian Council of State can be seen as a remarkable example of judicial environmental activism.

Distributional impacts of climate change mitigation in Indian electricity: The influence of governance

International Nuclear Information System (INIS)

Rao, Narasimha D.

2013-01-01

Studies that examine the distributional impacts of climate change mitigation policies often neglect the influence of institutions that implement these policies. This study examines the short-term consumption-side distributional impacts of expanding low-carbon electric supply in the state of Maharashtra, India with a focus on the influence of regulatory discretion in pricing. Households' welfare impacts from economy-wide electricity price shocks are simulated against a baseline that is calibrated to actual household economic and electricity service conditions, including actual electricity budgets, block tier prices and supply rationing. Industrial price impacts are propagated to households using a Leontief input–output analysis. Regulatory pricing decisions are evaluated based on social welfare metrics for economic efficiency and income inequality. The analysis reveals new linkages between climate change mitigation, electricity policy and income distribution. Low-income households can be shielded from mitigation impacts without losses in aggregate welfare to the extent that regulators can recover mitigation costs through industrial price increases. Regulators' flexibility to distribute costs across households is constrained by industrial customers' migration off the grid. Reduced supply interruptions to the rural poor from the resulting demand contraction are a potential co-benefit of mitigation. Distributional impacts, therefore, depend on other electricity policies that are driven by the political economy of the sector. - Highlights: • Indirect price increases harm most households less than residential price increases. • Regulators have flexibility to distribute mitigation costs across income groups. • Reduced supply interruptions are a potential co-benefit of mitigation

The nitrogen fate beyond the current nutrient mitigation measures: sustainability of an integrated agriculture

Science.gov (United States)

Thieu, V.; Billen, G. F.; Garnier, J.; Lancelot, C.; Gypens, N.

2010-12-01

Located in the North-Western Europe the terrestrial continuum that includes the Seine, Somme, and Scheldt River basins offers an interesting example of a transborder territory (France, Belgium, and Netherlands) with high-intensity anthropogenic pressures. It well-illustrates the rapid development of modern agriculture in industrialised countries and the resulting severe alteration of water resources and jeopardising the capacity of rural territories to produce drinking water. The corresponding nutrient loads delivered then into the Southern Bight of the North Sea, strongly affect the ecological functioning of the coastal zone. An integrated ‘river-ocean’ assessment, coupling two deterministic models - the SENEQUE RIVESTRAHLER model simulating nutrient dynamic in the drainage network and the MIRO model describing the ecological functioning coastal ecosystem - points out the relevance of current policy based measures (improvement of waste water treatment) to mitigate phosphorous emissions, while the nitrogen pollution related to agriculture will remain critical despite the implementation of classical management measure (good agricultural practices). Therefore and irrespectively of the current political agenda, a more radical alternative is established, consisting of a generalised shift to an integrated agriculture of all agricultural areas in the three basins, excluding the use of synthetically compounded fertilisers and the importation of livestock feed. Such scenario aims at evaluating whether agriculture, by essence, can conciliate (i) the demand for food and feed by local populations, (ii) a good ecological functioning of aquatic ecosystems and (iii) a balanced nutrient status for the adjacent coastal area. This scenario involves an increased livestock density in the Seine and Somme and a decrease in livestock in the Scheldt basin. It leads to a significant reduction of agricultural production that finally brings the three basins closer to autotrophy

Wavelets and triple difference as a mathematical method for filtering and mitigation of DGPS errors

Directory of Open Access Journals (Sweden)

Aly M. El-naggar

2015-12-01

Wavelet spectral techniques can separate GPS signals into sub-bands where different errors can be separated and mitigated. The main goal of this paper was the development and implementation of DGPS error mitigation techniques using triple difference and wavelet. This paper studies, analyzes and provides new techniques that will help mitigate these errors in the frequency domain. The proposed technique applied to smooth noise for GPS receiver positioning data is based upon the analysis of wavelet transform (WT. The technique is applied using wavelet as a de-noising tool to tackle the high-frequency errors in the triple difference domain and to obtain a de-noised triple difference signal that can be used in a positioning calculation.

Experience measuring performance improvement in multiphase picture archiving and communications systems implementations

OpenAIRE

Reed, Gary; Reed, Deborah Hobe

1999-01-01

When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial dat...

Release mitigation spray safety systems for chemical demilitarization applications.

Energy Technology Data Exchange (ETDEWEB)

Leonard, Jonathan; Tezak, Matthew Stephen; Brockmann, John E.; Servantes, Brandon; Sanchez, Andres L.; Tucker, Mark David; Allen, Ashley N.; Wilson, Mollye C.; Lucero, Daniel A.; Betty, Rita G.

2010-06-01

Sandia National Laboratories has conducted proof-of-concept experiments demonstrating effective knockdown and neutralization of aerosolized CBW simulants using charged DF-200 decontaminant sprays. DF-200 is an aqueous decontaminant, developed by Sandia National Laboratories, and procured and fielded by the US Military. Of significance is the potential application of this fundamental technology to numerous applications including mitigation and neutralization of releases arising during chemical demilitarization operations. A release mitigation spray safety system will remove airborne contaminants from an accidental release during operations, to protect personnel and limit contamination. Sandia National Laboratories recently (November, 2008) secured funding from the US Army's Program Manager for Non-Stockpile Chemical Materials Agency (PMNSCMA) to investigate use of mitigation spray systems for chemical demilitarization applications. For non-stockpile processes, mitigation spray systems co-located with the current Explosive Destruction System (EDS) will provide security both as an operational protective measure and in the event of an accidental release. Additionally, 'tented' mitigation spray systems for native or foreign remediation and recovery operations will contain accidental releases arising from removal of underground, unstable CBW munitions. A mitigation spray system for highly controlled stockpile operations will provide defense from accidental spills or leaks during routine procedures.

Nonzero-Sum Relationships in Mitigating Urban Carbon Emissions: A Dynamic Network Simulation.

Science.gov (United States)

Chen, Shaoqing; Chen, Bin; Su, Meirong

2015-10-06

The "stove-pipe" way of thinking has been mostly used in mitigating carbon emissions and managing socioeconomics because of its convenience of implementation. However, systems-oriented approaches become imperative in pursuit of an efficient regulation of carbon emissions from systems as complicated as urban systems. The aim of this paper is to establish a dynamic network approach that is capable of assessing the effectiveness of carbon emissions mitigation in a more holistic way. A carbon metabolic network is constructed by modeling the carbon flows between economic sectors and environment. With the network shocked by interventions to the sectoral carbon flows, indirect emissions from the city are accounted for under certain carbon mitigation strategies. The nonzero-sum relationships between sectors and environmental components are identified based on utility analysis, which synthesize the nature of direct and indirect network interactions. The results of the case study of Beijing suggest that the stove-pipe mitigation strategies targeted the economic sectors might be not as efficient as they were expected. A direct cutting in material or energy import to the sectors may result in a rebound in indirect emissions and thus fails to achieve the carbon mitigation goal of the city as a whole. A promising way of foreseeing the dynamic mechanism of emissions is to analyze the nonzero-sum relationships between important urban components. Thinking cities as systems of interactions, the network approach is potentially a strong tool for appraising and filtering mitigation strategies of carbon emissions.

Evaluation on the implementation of respiratory protection measures in old age homes

Directory of Open Access Journals (Sweden)

Lee DT

2017-09-01

Full Text Available Diana TF Lee,1 Doris Yu,1 Margaret Ip,2 Jennifer YM Tang3 1The Nethersole School of Nursing, The Chinese University of Hong Kong, 2Department of Microbiology, The Chinese University of Hong Kong, Prince of Wales Hospital, Sha Tin, 3Sau Po Centre on Ageing, The University of Hong Kong, Pok Fu Lam, Hong Kong Purpose: Old age homes (OAHs represent a vulnerable community for influenza outbreaks. Effective implementation of respiratory protection measures has been identified as an effective prevention measure to reduce mortality and morbidity caused by such outbreaks. Yet, relatively little is known about this aspect in these homes. This study evaluated the implementation of respiratory protection measures among infection control officers (ICOs and health care workers (HCWs in these homes in Hong Kong.Patients and methods: A territory-wide, cross-sectional survey was conducted in 87 OAHs. A total of 87 ICOs and 1,763 HCWs (including nurses, health workers, care workers, allied HCWs and assistants completed the questionnaires that evaluated the implementation at the organizational level and individual level, respectively. Generalized estimating equations with unstructured working correlation matrix were used to analyze the simultaneous influence of organizational and individual factors on the implementation.Results: At the organizational level, all homes had a policy on respiratory protection and implementation of such measures was generally adequate. Basic resources such as paper towels/hand dryers and equipment disinfectants, however, were rated as most inadequate by HCWs. Training opportunities were also identified as grossly inadequate. Only less than half of the ICOs and HCWs participated in training on infection control either at the initiation of employment or on a regular basis. Twenty-five percent of HCWs even indicated that they had never participated in any infection control training. At the individual level, hand hygiene, among other

Fan Cooler Operation in Kori 1 for Mitigating Severe Accident

International Nuclear Information System (INIS)

Suh, Nam Duk; Park, Jae Hong

2005-01-01

The Korea Ministry of Science and Technology (MOST) issued the 'Policy on Severe Accident of Nuclear Power Plants' in August 2001. According to the policy it was required for the licensee to develop a plant specific severe accident management guideline (SAMG) and to implement it. Thus the utility has made an implementation plan to develop SAMGs for operating plants. The SAMG for Kori unit 1 was submitted to the government on January 2004. Since then, the government trusted KINS to review the submitted SAMG in view of its feasibility and effectiveness. The first principle of the developed SAMG is to use only the available facilities as it is without introducing any system change. Because Kori-1 has no mitigative facility against combustible gases during severe accident, it relies heavily both on spray and on fan cooler systems to control the containment condition. Thus one of the issues raised during the review is to know whether the fan coolers which are designed for DBA LOCA can be effective in mitigating the severe accident conditions. This paper presents an analysis result of fan cooler operation in controlling the containment condition during severe accident of Kori 1

Mitigation of Power frequency Magnetic Fields. Using Scale Invariant and Shape Optimization Methods

Energy Technology Data Exchange (ETDEWEB)

Salinas, Ener; Yueqiang Liu; Daalder, Jaap; Cruz, Pedro; Antunez de Souza, Paulo Roberto Jr; Atalaya, Juan Carlos; Paula Marciano, Fabianna de; Eskinasy, Alexandre

2006-10-15

The present report describes the development and application of two novel methods for implementing mitigation techniques of magnetic fields at power frequencies. The first method makes use of scaling rules for electromagnetic quantities, while the second one applies a 2D shape optimization algorithm based on gradient methods. Before this project, the first method had already been successfully applied (by some of the authors of this report) to electromagnetic designs involving pure conductive Material (e.g. copper, aluminium) which implied a linear formulation. Here we went beyond this approach and tried to develop a formulation involving ferromagnetic (i.e. non-linear) Materials. Surprisingly, we obtained good equivalent replacement for test-transformers by varying the input current. In spite of the validity of this equivalence constrained to regions not too close to the source, the results can still be considered useful, as most field mitigation techniques are precisely developed for reducing the magnetic field in regions relatively far from the sources. The shape optimization method was applied in this project to calculate the optimal geometry of a pure conductive plate to mitigate the magnetic field originated from underground cables. The objective function was a weighted combination of magnetic energy at the region of interest and dissipated heat at the shielding Material. To our surprise, shapes of complex structure, difficult to interpret (and probably even harder to anticipate) were the results of the applied process. However, the practical implementation (using some approximation of these shapes) gave excellent experimental mitigation factors.

100% Renewable energy systems, climate mitigation and economic growth

DEFF Research Database (Denmark)

Vad Mathiesen, Brian; Lund, Henrik; Karlsson, Kenneth Bernard

2011-01-01

that implementing energy savings, renewable energy and more efficient conversion technologies can have positive socio-economic effects, create employment and potentially lead to large earnings on exports. If externalities such as health effects are included, even more benefits can be expected. 100% Renewable energy......Greenhouse gas mitigation strategies are generally considered costly with world leaders often engaging in debate concerning the costs of mitigation and the distribution of these costs between different countries. In this paper, the analyses and results of the design of a 100% renewable energy...... system by the year 2050 are presented for a complete energy system including transport. Two short-term transition target years in the process towards this goal are analysed for 2015 and 2030. The energy systems are analysed and designed with hour-by-hour energy system analyses. The analyses reveal...

Kozloduy NPP units 5 and 6 modernization program. Measures implementation in outages

International Nuclear Information System (INIS)

Naydenov, N.; Mignone, O.

2004-01-01

The units 5 and 6 modernization program is a highly demanding program composed by many plant modifications and studies about plant conditions. The program measures implementation during the units outages represents a challenge by the need to compromise shut down duration with the workload related to measures installation. The units shutdown duration should be kept to the planned duration. In parallel, contractors work has to be organized, planned and performed to allow successful measures completion. In accordance with the contract requirements, contractors prepare installation documents which comprise all activities to be performed during the installation and testing of the measures. The subcontractors complement these installation documents with the project organization and execution documents, which include the manpower skills, qualifications, work orders, and other important installation instructions and information. Contractors prepared detailed installation schedules, and these were integrated by Parsons E and C in the Integrated installation schedule. The integrated schedule proved to be useful to identify possible area usage conflicts and manpower overlapping, with appropriate results for electrical, instrumentation and control work, and for the utilization of the polar crane in the containment building. Contractors installation schedules were updated on a weekly basis, showing variances versus the target, and manpower histograms for the resource loading. Organization of contractors work was supported by KNPP plant outage meetings, in which status and problems were addressed, and solution and/or corrective actions defined for further implementation. KNPP meetings were planned on a daily basis for most relevant or critical measures, or on a weekly basis for less intensive measures. KNPP meetings proved to be an excellent communication tool for keeping the measures under control and monitoring KNPP defined personnel responsible for authorizing changes, in

A greenhouse-gas information system monitoring and validating emissions reporting and mitigation

Energy Technology Data Exchange (ETDEWEB)

Jonietz, Karl K [Los Alamos National Laboratory; Dimotakis, Paul E [JPL/CAL TECH; Roman, Douglas A [LLNL; Walker, Bruce C [SNL

2011-09-26

Current GHG-mitigating regimes, whether internationally agreed or self-imposed, rely on the aggregation of self-reported data, with limited checks for consistency and accuracy, for monitoring. As nations commit to more stringent GHG emissions-mitigation actions and as economic rewards or penalties are attached to emission levels, self-reported data will require independent confirmation that they are accurate and reliable, if they are to provide the basis for critical choices and actions that may be required. Supporting emissions-mitigation efforts and agreements, as well as monitoring energy- and fossil-fuel intensive national and global activities would be best achieved by a process of: (1) monitoring of emissions and emission-mitigation actions, based, in part, on, (2) (self-) reporting of pertinent bottom-up inventory data, (3) verification that reported data derive from and are consistent with agreed-upon processes and procedures, and (4) validation that reported emissions and emissions-mitigation action data are correct, based on independent measurements (top-down) derived from a suite of sensors in space, air, land, and, possibly, sea, used to deduce and attribute anthropogenic emissions. These data would be assessed and used to deduce and attribute measured GHG concentrations to anthropogenic emissions, attributed geographically and, to the extent possible, by economic sector. The validation element is needed to provide independent assurance that emissions are in accord with reported values, and should be considered as an important addition to the accepted MRV process, leading to a MRV&V process. This study and report focus on attributes of a greenhouse-gas information system (GHGIS) needed to support MRV&V needs. These needs set the function of such a system apart from scientific/research monitoring of GHGs and carbon-cycle systems, and include (not exclusively): the need for a GHGIS that is operational, as required for decision-support; the need for a

Security in the transport of radioactive material: Implementing guide. Spanish edition

International Nuclear Information System (INIS)

2013-01-01

This guide provides States with guidance in implementing, maintaining or enhancing a nuclear security regime to protect radioactive material (including nuclear material) in transport against theft, sabotage or other malicious acts that could, if successful, have unacceptable radiological consequences. From a security point of view, a threshold is defined for determining which packages or types of radioactive material need to be protected beyond prudent management practice. Minimizing the likelihood of theft or sabotage of radioactive material in transport is accomplished by a combination of measures to deter, detect, delay and respond to such acts. These measures are complemented by other measures to recover stolen material and to mitigate possible consequences, in order to further reduce the risks

Security in the Transport of Radioactive Material. Implementing Guide (French Edition)

International Nuclear Information System (INIS)

2012-01-01

This guide provides States with guidance in implementing, maintaining or enhancing a nuclear security regime to protect radioactive material (including nuclear material) in transport against theft, sabotage or other malicious acts that could, if successful, have unacceptable radiological consequences. From a security point of view, a threshold is defined for determining which packages or types of radioactive material need to be protected beyond prudent management practice. Minimizing the likelihood of theft or sabotage of radioactive material in transport is accomplished by a combination of measures to deter, detect, delay and respond to such acts. These measures are complemented by other measures to recover stolen material and to mitigate possible consequences, in order to further reduce the risks.

Security in the Transport of Radioactive Material. Implementing Guide (Chinese Edition)

International Nuclear Information System (INIS)

2012-01-01

This guide provides States with guidance in implementing, maintaining or enhancing a nuclear security regime to protect radioactive material (including nuclear material) in transport against theft, sabotage or other malicious acts that could, if successful, have unacceptable radiological consequences. From a security point of view, a threshold is defined for determining which packages or types of radioactive material need to be protected beyond prudent management practice. Minimizing the likelihood of theft or sabotage of radioactive material in transport is accomplished by a combination of measures to deter, detect, delay and respond to such acts. These measures are complemented by other measures to recover stolen material and to mitigate possible consequences, in order to further reduce the risks.

Technologies for climate change mitigation - Agriculture sector

Energy Technology Data Exchange (ETDEWEB)

Uprety, D.C.; Dhar, S.; Hongmin, D.; Kimball, B.A.; Garg, A.; Upadhyay, J.

2012-07-15

This guidebook describes crop and livestock management technologies and practices that contribute to climate change mitigation while improving crop productivity, reducing reliance on synthetic fertilizers, and lowering water consumption. It is co-authored by internationally recognised experts in the areas of crops, livestock, emissions, and economics, and we are grateful for their efforts in producing this cross disciplinary work. This publication is part of a technical guidebook series produced by the UNEP Risoe Centre on Energy, Climate and Sustainable Development (URC) as part of the Technology Needs Assessment (TNA) project (http://tech-action.org) that is assisting developing countries in identifying and analysing the priority technology needs for mitigating and adapting to climate change. The TNA process involves different stakeholders in a consultative process, enabling all stakeholders to understand their technology needs in a cohesive manner, and prepare Technology Action Plans (TAPs) accordingly. The TNA project is funded by the Global Environment Facility (GEF) and is being implemented by UNEP and the URC in 36 developing countries. (Author)

Factors Influencing Stormwater Mitigation in Permeable Pavement

Directory of Open Access Journals (Sweden)

Chun Yan Liu

2017-12-01

Full Text Available Permeable pavement (PP is used worldwide to mitigate surface runoff in urban areas. Various studies have examined the factors governing the hydrologic performance of PP. However, relatively little is known about the relative importance of these governing factors and the long-term hydrologic performance of PP. This study applied numerical models—calibrated and validated using existing experimental results—to simulate hundreds of event-based and two long-term rainfall scenarios for two designs of PP. Based on the event-based simulation results, rainfall intensity, rainfall volume, thickness of the storage layer and the hydraulic conductivity of the subgrade were identified as the most influential factors in PP runoff reduction. Over the long term, PP performed significantly better in a relatively drier climate (e.g., New York, reducing nearly 90% of runoff volume compared to 70% in a relatively wetter climate (e.g., Hong Kong. The two designs of PP examined performed differently, and the difference was more apparent in the relatively wetter climate. This study generated insights that will help the design and implementation of PP to mitigate stormwater worldwide.

The prevalence of implementation of mental health measures in companies and its association with sickness absence.

Science.gov (United States)

Pas, L Willemijn; Boot, Cécile R L; van der Beek, Allard J; Proper, Karin I

2016-03-01

The main objective was to determine the prevalence of implementation of mental health measures aimed at the prevention of high workload (workload measures) and the promotion of work engagement (engagement measures) in companies and sectors. Additionally, its associations with sickness absence was explored. Cross-sectional survey. An internet-based survey among 12,894 company representatives in the Netherlands. Descriptive analyses were performed to determine the prevalence, and differences between sectors were tested using Chi-squared tests. ANOVA was performed to examine the association between companies with or without mental health measures and sickness absence rates. 32.8% and 21.7% of the companies reported to have implemented 'continuously or often' workload measures and engagement measures, respectively. The sectors 'health care and welfare' and 'education' reported to have implemented measures most often. Having implemented engagement measures was significantly associated with lower sickness absence (4.1% vs 4.5%). Overall, workload measures were more often implemented than engagement measures. Future research is recommended to determine reasons for implementation as well as causality in the association between mental health measures and sickness absence. Copyright © 2015. Published by Elsevier Ltd.

Wildlife mitigation and monitoring report Gunnison, Colorado, site

International Nuclear Information System (INIS)

1997-04-01

The Uranium Mill Tailings Remedial Action (UMTRA) Project is administered by the U.S. Department of Energy (DOE); its purpose is to cleanup uranium mill tailings and other contaminated material at 24 UMTRA Project sites in 10 states. This report summarizes the wildlife mitigation and monitoring program under way at the Gunnison UMTRA Project, Gunnison, Colorado. Remedial action at the Gunnison site was completed in December 1995 and is described in detail in the Gunnison completion report. The impacts of this activity were analyzed in the Gunnison environmental assessment (EA). These impacts included two important game species: the pronghorn antelope (Antilocapra americans) and sage grouse (Wentrocerus urophasianus). Haul truck traffic was predicted to limit antelope access to water sources north of the Tenderfoot Mountain haul road and that truck traffic along this and other haul roads could result in antelope road kills. Clearing land at the disposal cell, haul road and borrow site activities, and the associated human activities also were predicted to negatively impact (directly and indirectly) sage grouse breeding, nesting, loafing, and wintering habitat. As a result, an extensive mitigation and monitoring plan began in 1992. Most of the monitoring studies are complete and the results of these studies, written by different authors, appear in numerous reports. This report will: (1) Analyze existing impacts and compare them to predicted impacts. (2) Summarize mitigation measures. (3) Summarize all existing monitoring data in one report. (4) Analyze the effectiveness of the mitigation measures

Assessing organizational implementation context in the education sector: confirmatory factor analysis of measures of implementation leadership, climate, and citizenship.

Science.gov (United States)

Lyon, Aaron R; Cook, Clayton R; Brown, Eric C; Locke, Jill; Davis, Chayna; Ehrhart, Mark; Aarons, Gregory A

2018-01-08

A substantial literature has established the role of the inner organizational setting on the implementation of evidence-based practices in community contexts, but very little of this research has been extended to the education sector, one of the most common settings for the delivery of mental and behavioral health services to children and adolescents. The current study examined the factor structure, psychometric properties, and interrelations of an adapted set of pragmatic organizational instruments measuring key aspects of the organizational implementation context in schools: (1) strategic implementation leadership, (2) strategic implementation climate, and (3) implementation citizenship behavior. The Implementation Leadership Scale (ILS), Implementation Climate Scale (ICS), and Implementation Citizenship Behavior Scale (ICBS) were adapted by a research team that included the original scale authors and experts in the implementation of evidence-based practices in schools. These instruments were then administered to a geographically representative sample (n = 196) of school-based mental/behavioral health consultants to assess the reliability and structural validity via a series of confirmatory factor analyses. Overall, the original factor structures for the ILS, ICS, and ICBS were confirmed in the current sample. The one exception was poor functioning of the Rewards subscale of the ICS, which was removed in the final ICS model. Correlations among the revised measures, evaluated as part of an overarching model of the organizational implementation context, indicated both unique and shared variance. The current analyses suggest strong applicability of the revised instruments to implementation of evidence-based mental and behavioral practices in the education sector. The one poorly functioning subscale (Rewards on the ICS) was attributed to typical educational policies that do not allow for individual financial incentives to personnel. Potential directions for

Systems Antecedents for Dissemination and Implementation: A Review and Analysis of Measures

Science.gov (United States)

Emmons, Karen M.; Weiner, Bryan; Fernandez, Maria; Tu, Shin-Ping

2011-01-01

There is a growing emphasis on the role of organizations as settings for dissemination and implementation. Only recently has the field begun to consider features of organizations that impact on dissemination and implementation of evidence-based interventions. This manuscript identifies and evaluates available measures for 5 key organizational-level constructs: (1) leadership; (2) vision; (3) managerial relations; (4) climate; and (5) absorptive capacity. Overall the picture was the same across the five constructs—no measure was used in more than one study, many studies did not report the psychometric properties of the measures, some assessments were based on a single response per unit, and the level of the instrument and analysis did not always match. We must seriously consider the development and evaluation of a robust set of measures that will serve as the basis of building the field, allow for comparisons across organizational types and intervention topics, and allow a robust area of dissemination and implementation research to develop. PMID:21724933

Implementing unsteady friction in pressure-time measurements

OpenAIRE

Jonsson, Pontus; Ramdal, Jorgen; Cervantes, Michel; Nielsen, Torbjørn Kristian

2012-01-01

Laboratory measurements using the pressure‐time method showed a velocity or Reynolds number dependent error of the flow estimate. It was suspected that the quasi steady friction formulation of the method was the cause. This was investigated, and it was proved that implementing a model for unsteady friction into the calculations improved the result. This paper presents the process of this investigation, and proposes a new method for treatment of the friction term in the pressure‐time method.

1996 monitoring report for the Gunnison, Colorado, wetlands mitigation plan

International Nuclear Information System (INIS)

1996-12-01

The US Department of Energy (DOE) administers the Uranium Mill Tailings Remedial Action (UMTRA) Project to clean up uranium mill tailings and other surface contamination at 24 abandoned uranium mill sites in 10 states. One of these abandoned mill sites was near the town of Gunnison, Colorado. Surface remediation was completed at the Gunnison site in December 1995. Remedial action resulted in the elimination of 4.3 acres of wetlands and mitigation of this loss is through the enhancement of 17.8 acres of riparian plant communities in six spring-fed areas on US Bureau of Land Management mitigation sites. A five-year monitoring program was then implemented to document the response of vegetation and wildlife to the exclusion of livestock. This report provides the results of the third year of the monitoring program

Adaptation and Mitigation in Agriculture: A Review of Synergies and Tradeoffs and How EO Could Improve Understanding and Outcomes

Science.gov (United States)

Barbieri, L.; Wollenberg, E.

2017-12-01

We present a review of the published literature on agricultural adaptation and mitigation, and report on the current evidence as to whether changes in agricultural practices meant to achieve mitigation or adaptation goals can be dual purpose: simultaneously reducing greenhouse gas (GHG) emissions and helping to facilitate adaptation. We characterize the spatio-temporal and system trends in how adaptation and mitigation outcomes are being achieved, and report on the current technical and knowledge gaps that exist and where Earth observations (EO) could improve our understanding. Agriculture contributes 12% GHG emissions globally, roughly one third from the developing world. Nearly 70% of the technical mitigation potential in agriculture sector occurs in these countries, however, while the mitigation potential is high, agricultural productivity also relies heavily on climate factors. With climate change, agricultural systems already, and will increasingly, need to adapt to extreme events and variability in temperatures and precipitation. This underscores the importance of implementing agricultural practices that can both reduce GHG emissions and help facilitate adaptation. Until recently, these objectives have been treated separately, but policy makers are increasingly calling for a joint approach to improve synergies, and avoid tradeoffs. There remain many complications in considering a joint approach: lack of clear conceptual frameworks, knowledge gaps in scientific understanding and evidence associated with adaptation and mitigation outcomes, and the abilities and motivations of stakeholders to consider both objectives. We review 56 peer-reviewed publications and present results from an in-depth analysis to answer two major concerns: to what extent is evidence provided for claims of synergistic outcomes, and what uncertainty surrounds this evidence. Our results show that only 21% of studies empirically measured both mitigation and adaptation outcomes, and claims

Mitigation: cross-sectoral and other issues

Energy Technology Data Exchange (ETDEWEB)

Leemans, R. [National Inst. of Public Health and Environmental Protection, Bilthoven (Netherlands). Coordination Center for Effects

1996-12-31

Measures, methodologies and technologies to reduce emissions and enhance sinks of greenhouse gases (GHG) are assessed in this paper, together with other options for limiting anthropogenic climatic change and consequences. This chapter of the Intergovernmental Panel on Climate Change Working Group II`s 1996 report discusses the cross-sectorial potential for reducing emissions between areas discussed specifically in other chapters namely energy supply, industry, transportation, human settlements, agriculture and forestry, aiming to provide an integrated analysis of mitigation options with cross-cutting themes. Energy supply and demand issues within a low GHG emissions scenario are discussed as are issues relating to land use and land cover. Broadly-based concepts for counterbalancing climatic change are described and their mitigation potential assessed. (UK)

Understanding household preferences for hurricane risk mitigation information: evidence from survey responses.

Science.gov (United States)

Chatterjee, Chiradip; Mozumder, Pallab

2014-06-01

Risk information is critical to adopting mitigation measures, and seeking risk information is influenced by a variety of factors. An essential component of the recently adopted My Safe Florida Home (MSFH) program by the State of Florida is to provide homeowners with pertinent risk information to facilitate hurricane risk mitigation activities. We develop an analytical framework to understand household preferences for hurricane risk mitigation information through allowing an intensive home inspection. An empirical analysis is used to identify major drivers of household preferences to receive personalized information regarding recommended hurricane risk mitigation measures. A variety of empirical specifications show that households with home insurance, prior experience with damages, and with a higher sense of vulnerability to be affected by hurricanes are more likely to allow inspection to seek information. However, households with more members living in the home and households who live in manufactured/mobile homes are less likely to allow inspection. While findings imply MSFH program's ability to link incentives offered by private and public agencies in promoting mitigation, households that face a disproportionately higher level of risk can get priority to make the program more effective. © 2014 Society for Risk Analysis.

Disaster risk mitigation – why human rights matter

Directory of Open Access Journals (Sweden)

Walter Kälin

2008-10-01

Full Text Available Existing human rights obligations already require states totake measures to mitigate the risks of natural or man-madedisasters – including those due to climate change – and thusto prevent displacement.

Methane, nitrous oxide emissions and mitigation strategies for ...

African Journals Online (AJOL)

flavio

2017-03-30

Mar 30, 2017 ... from livestock in developing countries and the mitigation actions that could be put in .... This measurement reflects most accurately the management, feeding and ...... and profit dimensions: A developing country perspective.

Implementation of a new Disruption Mitigation System into the control system of JET

Energy Technology Data Exchange (ETDEWEB)

Jachmich, Stefan, E-mail: s.jachmich@fz-juelich.de [Laboratory for Plasma Physics, Ecole Royale Militaire/Koninklijke Militaire School, B-1000 Brussels (Belgium); Kruezi, Uron; Card, Peter; Deakin, Kieron; Kinna, David [Culham Centre for Fusion Energy, Abingdon, Oxon OX14 3DB (United Kingdom); Koslowski, Hans Rudolf; Lambertz, Horst Toni [Forschungszentrum Jülich GmbH, IEK-4, 52425 Jülich (Germany); Lehnen, Michael [ITER Organization, Route de Vinon-sur-Verdon, CS90046, 13067 St Paul Lez Durance Cedex (France)

2015-10-15

Highlights: • A new Disruption Mitigation System based on Massive Gas Injection has been installed at JET. • The control of the attached gas handling system had to be integrated into the JET-operation. • An interlock system has been built to cope with the interaction of the DMS with other auxiliary systems. • The system has been commissioned and first example of DMS used to ameliorate a disruption are shown. - Abstract: A new Disruption Mitigation System (DMS) based on Massive Gas Injections (MGI) has been installed at the JET-tokamak. The key component of this system is a fast eddy current driven valve, which is capable of injecting up to 4.6 × 10{sup −3} MPa m{sup 3} in less than 5 ms. Along with this valve a new gas handling system has been installed, whose control had to be integrated into the JET-operation. The operation of the DMS requires interaction with several other systems. Although Massive Gas Injections are used to ameliorate potentially severe damage to the tokamak plant and plasma facing components caused by disruptions, they introduce a high risk for example to auxiliary heating systems or diagnostics, which could be damaged by high vacuum pressures. In addition to this, the presence of high pressure (of noble and flammable gases) in combination with high voltages represents a risk not only to the actual DMS plant itself (in case of a failure) but also to personnel in the vicinity. These varieties of risks have been addressed and are described in this article.

Comprehensive development of industrial symbiosis for the response of greenhouse gases emission mitigation: Challenges and opportunities in China

International Nuclear Information System (INIS)

Liu, Zhe; Adams, Michelle; Cote, Raymond P.; Geng, Yong; Chen, Qinghua; Liu, Weili; Sun, Lu; Yu, Xiaoman

2017-01-01

Although not yet a global consensus, there is widespread agreement that climate change is the result of anthropogenic sources of greenhouse gases (GHG) emissions. In order to respond to this issue, society has applied such strategies as clean energy development, improving industrial resource efficiency etc. Despite this, GHG emissions are still pursuing an upward trend. As the largest global GHG emitter, China faces a considerable challenge in responding to its agreed target of 40–45% GHG emission mitigation per unit gross domestic production (GDP) by 2020 as compared to 2005 levels. How to practically achieve this is still largely undecided. Comprehensive development of industrial symbiosis around nationwide is considered part of the solution. However, few researchers have studied how to actually implement a comprehensive development of industrial symbiosis for the purpose of GHG emission mitigation. This work intends to address this gap through highlighting the opportunities to develop such an approach for particular application to GHG emissions reduction in China. In addition, this study will also address the challenges ahead associated with the implementation of such a strategy, and outlines the where future research could be focused. Policy implications like establishing industrial symbiosis indicators associated with GHG emission mitigation are proposed. - Highlights: • Urgent issue of GHG mitigation and background of industrial symbiosis are introduced. • The challenges like lack of indicator, investigating methodologies and regional disparity are analyzed. • Opportunities for GHG mitigation through comprehensive development of industrial symbiosis are detailed. • Policy implications for responding GHG mitigation through industrial symbiosis are proposed.

Analysis of the carbon sequestration costs of afforestation and reforestation agroforestry practices and the use of cost curves to evaluate their potential for implementation of climate change mitigation

Energy Technology Data Exchange (ETDEWEB)

Torres, Arturo Balderas [Environment Department, University of York, YO10 5DD (United Kingdom); Instituto Tecnologico y de Estudios Superiores de Occidente (ITESO), Tlaquepaque CP (Mexico); Technology and Sustainable Development Section, Center for Clean Technology and Environmental Policy, University of Twente/CSTM, P.O. Box 217, 7500 AE Enschede (Netherlands); Marchant, Rob; Smart, James C.R. [Environment Department, University of York, YO10 5DD (United Kingdom); Lovett, Jon C. [Environment Department, University of York, YO10 5DD (United Kingdom); Technology and Sustainable Development Section, Center for Clean Technology and Environmental Policy, University of Twente/CSTM, P.O. Box 217, 7500 AE Enschede (Netherlands); Tipper, Richard [Ecometrica, Edinburgh, EH9 1PJ (United Kingdom)

2010-01-15

Carbon sequestration in forest sinks is an important strategy to remove greenhouse gases and to mitigate climate change; however its implementation has been limited under the Clean Development Mechanism of the Kyoto Protocol which has not created the incentives for widespread implementation. The objective of this paper is to analyze the sequestration costs of agroforestry afforestation and reforestation projects (ARPs) following a partial market equilibrium using average cost curves and economic break even analysis to identify the supply costs. The modelling done in this work contrasts the voluntary and clean development mechanism transaction costs. Data is based on the voluntary project, Scolel Te, being implemented in Mexico. Cost curves are developed for seven different sequestration options considering transaction and implementation costs; information from agricultural production in Chiapas Mexico is used to integrate opportunity costs of two agroforestry practices suggesting that sequestration costs may follow a 'U' shape, with an initial reduction due to economies of scale and a subsequent increase caused by high opportunity costs. The widespread implementation of agroforestry options not requiring complete land conversion (e.g. living fences and coffee under shade) might be cost effective strategies not generating high opportunity costs. Results also suggest that payments in the early years of the project and lower transaction costs favour the development of ARPs in the voluntary market especially in marginal rural areas with high discount rates. (author)

Issues of Mitigation Strategies in Augmented System for Next Generation Control Room

Energy Technology Data Exchange (ETDEWEB)

Tuan Q. Tran

2007-08-01

Past research on augmented systems has been predominately concerned with measuring and classifying an operator’s functional states. Only recently has the field begun researching mitigation strategies. The purpose of this paper is to add further conceptual understanding to mitigation strategies. Based upon the decision making literature, we pose three issues that mitigation strategies need to resolve: the types of decision strategies an operator uses, the structure of the information that an operator processes, and finally, the cue or pattern of cues that the operator relies on in making decisions. These issues are important to ensure that mitigation strategies are congruent to operator’s decision-making behaviors.

ISU Team Project: An Integral View on Space Debris Mitigation and Removal

Science.gov (United States)

Maier, Philipp; Ricote Navarro, Carmon; Jehn, Rudiger; Gini, Andrea; Faure, Pauline; Adriaensen, Maarten; Datta, Iman; Hilbich, Daniel; Jacimovic, Aleksandar; Jacques, Lionel; Penent, Guilhem; Sinn, Thomas; Shioi, Hiroaki

2013-08-01

The issue of space debris poses challenges not only in technical, but also legal, political and economic dimensions. A sustainable solution needs to take into account all of them. This paper investigates such a potential solution in a multidisciplinary approach. To this end, it addresses the effectiveness of the existing debris mitigation guidelines, and identifies technical improvements for mitigation. It continues examining technical concepts for debris removal and performing proper cost-benefit trade-offs. The results of new simulations to assess the damage cost caused by space debris are presented. Based on these findings, an organizational framework and political recommendations are developed which will enable a sustainable use of space starting in 2020. The findings are compiled into a roadmap, which outlines 1) a path to the full adherence to debris mitigation guidelines and 2) the removal of ten large pieces of debris per year by a dedicated international organization, including expected expenditures necessary for its implementation.

Investigation of Coating and Corrosion Mitigation Strategies in Magnesium/Mixed Metal Assemblies

Science.gov (United States)

Forsmark, Joy H.; McCune, Robert C.; Giles, Terry; Audette, Michelle; Snowden, Jasmine; Stalker, Jeff; Morey, Matthew; O'Keefe, Matt; Castano, Carlos

The US Automotive Materials Partnership through the Magnesium-Intensive Front End Development Project (MFERD) is currently investigating a number of joining, coating and corrosion mitigation strategies to incorporate magnesium components into the automotive body-in-white with the ultimate goal of decreasing vehicle curb weight, thus improving fuel economy. Because Mg is anodic to all other structural metals, this is a key hurdle to Mg component implementation in vehicles. This paper will discuss the results of a study to examine the effectiveness of different corrosion mitigation strategies in joined plate assemblies and provide some insight into the systems challenges of incorporation of Mg parts into a vehicle. Details of a statistically-designed experiment developed to explore the interaction of several materials of construction (magnesium, steel and aluminum), pretreatment and topcoatings, joining methods and standardized test protocols including SAE J-2334 and ASTM B-117 are discussed. A number of avenues have emerged from this study as potential strategies for corrosion mitigation.